diff --git a/03-Architecture-Hardware/2026-07-06_Drogheda_EinarBoard-1.0-PreFab-Audit_v1.0.md b/03-Architecture-Hardware/2026-07-06_Drogheda_EinarBoard-1.0-PreFab-Audit_v1.0.md new file mode 100644 index 0000000..6ad7646 --- /dev/null +++ b/03-Architecture-Hardware/2026-07-06_Drogheda_EinarBoard-1.0-PreFab-Audit_v1.0.md @@ -0,0 +1,198 @@ +--- +title: EINARBoard HBOX 1.0 — Pre-Fabrication Design Audit +tags: [project-drogheda, hardware, watchdog, pcb, audit, einarboard] +project: Project Drogheda +author: Helgen CTO (Claude audit, reviewed by Leo) +date: 2026-07-06 +status: BLOCKING — do NOT order until HIGH items are cleared +--- + +# EINARBoard HBOX 1.0 (`hbox-watchdog-v3-PROD`) — Pre-Fab Audit + +**Scope:** read-only audit of the KiCad project as of 2026-07-06 17:14 (PCB saved 17:06, fab +package `production/` regenerated 17:14). Board = 135 × 100 mm, 4-layer (F / In1-GND / In2 / B), +132 components, 1317 tracks, 130 nets. Sources checked against: LTC4040 datasheet (ADI 4040fb), +Omron G5V-1 datasheet, ArduSimple 4G NTRIP Master pinout diagram (footprint-R00), AOS AO4406A +pinout, today's IPC-D-356 netlist, ERC/DRC runs, and the canonical repo docs. + +**Verdict: the architecture is right and most of the execution is verified-correct, but there +are 4 HIGH findings — 3 of them silent board-killers — that must be fixed before ordering. +Estimated fix effort: one KiCad session (~2–4 h) + re-export.** + +--- + +## 1. HIGH — fix before ordering + +### H1. Q7 (LTC4040 input pass-FET) is installed backwards +- **Board:** Q7 AO4406A source (pads 1–3) = `MAIN5V` (VSYS), drain (pads 5–8) = `VIN_SW` (CLN). +- **Datasheet:** the mandatory input FET disconnects the system from the input during backup; + with the OVP FET the pair is common-source at VIN (OVSNS text: the OVP FET's *drain* faces the + input connector). Correct single-FET orientation = **source on the VIN/CLN side, drain on VSYS** + (body diode conducts VIN→VSYS at startup, blocks VSYS→VIN in backup). +- **As built:** body diode points MAIN5V→VIN_SW, so during a power-fail event the boost output + back-feeds the dead vehicle rail through the body diode — the input can never be disconnected; + backup collapses / pack drains into the SD-15B-05 output. **It will look fine on the bench in + normal mode and fail exactly at the moment the battery backup is needed.** +- **Fix:** swap S↔D on Q7 in the schematic (MAIN5V ↔ VIN_SW), resync, reroute locally. + +### H2. Q5 / Q6 (MMBT3904) have collector/emitter swapped — BCE symbol on a BEC part +- Symbols are `Device:Q_NPN_BCE` (1=B, 2=C, 3=E) on generic `SOT-23` footprints, but the + MMBT3904 SOT-23 is physically **1=B, 2=E, 3=C**. +- Result: Q5 (RTK load-switch driver, pad2=`GATE_LS`) and Q6 (K1 relay driver, pad2=`KCOIL`) + operate in reverse-active mode (β ≈ 2–10). Q6 likely **cannot sink the 30 mA coil current → + K1 never energizes → Modo B injection dead** (corrections survive via the NC bypass — the + fail-safe does its job). Q5 may *appear* to work (10 k pull-up is easy to overcome) but with + degraded VOL, unit-to-unit variation, and ~5 V reverse E-B stress (BVebo = 6 V abs max). +- **Fix:** replace both with `Q_NPN_BEC` (or re-map pins), resync, reroute. SOT-23 rework is trivial. + +### H3. RIG (ignition sense) — value drift + dangling schematic pin (the 1 ERC error) +- **Schematic:** Rig = **22 k** — correct for the *current* topology (DFR1015 was removed; GX16 + pin 3 raw 12–24 V now feeds Rig 22k / Rigb 10k divider + D5 BAT54 clamp to 3V3 + C9 → PA5). +- **PCB + both fab BOMs:** Rig = **100 R** (stale, from the old DFR1015→5 V design). If assembled + as 100 R: ≈ 200 mA through the BAT54 clamp at 24 V ignition (~0.5 W in an 0603) → **D5 and Rig + burn, ignition sense dead**, possible PA5 damage. +- **Schematic wire bug:** Rig pin 2 (36.83, 74.93) does not terminate on the IGN_SENSE wire — + the wire passes *through* the pin (73.66→76.2) without a junction. This is the single ERC + error and means sch↔PCB sync is no longer provable; any future netlist push would also break. +- **Fix:** terminate the wire on the pin, set the PCB value to 22k, regenerate BOM/CPL. + +### H4. `SW_IN` routed entirely at 0.2 mm — full RTK-stack current on an 8-mil trace +- `SW_IN` (F1 PPTC → Q1 source) is **missing from the netclass patterns**, so the USB autoroute + pass laid it at the Default 0.2 mm — 18 segments, ~46 mm total, carrying ~1.2 A continuous + (F9P + modem via U7) and up to ~3 A+ during PPTC fault ride-through. Expect large temperature + rise / voltage drop right at the stack's supply. +- Also audit `VEH5V`: several long 0.2 mm runs on B.Cu (20–30 mm). The main P2→RS1→U6 path is + 1.5 mm, and the thin runs appear to be the JP1 / sense branches — verify none of them is the + only path for load current. +- **Fix:** add `SW_IN` (pattern) to PWR_HI, reroute F1→Q1 at ≥1.0–1.5 mm, re-check VEH5V. + +--- + +## 2. MEDIUM — decide/verify before or at ordering + +- **M1. Fab BOM/CPL are not assembly-ready.** No LCSC part numbers anywhere; DNP parts (P3, + P13, H3) carry "(DNP)" only in the Value text — no DNP attribute — and appear in BOM *and* + CPL; CPL also lists THT sockets and the MOD1 pseudo-footprint. Fine for a **bare-board** + order; blocks a JLCPCB **PCBA** order. (QFN-24 + DFN + SOT-563 + USB-C by hand is doable but + unpleasant — decide which path you're buying.) +- **M2. Your own fab gate is unmet.** The declared gate was "bench-validate the LTC4040 backup + + hot-cell charge cutoff on the proto first" — the proto validates the *concept* with TP4056, + not the LTC4040 circuit. Bare boards are cheap, so ordering after H1 is a defensible risk — + but make that call consciously; don't discover LTC4040 issues on 30 assembled units. +- **M3. D0/D1 (and D2/D8) direction on a physical simpleRTK2B Pro is still unverified** (your + own open item since Jul-2). Board: MOD1 D1=`GNSS_TX` (PA2 MCU-TX), D0=`GNSS_RX` (PA3). If the + Pro's D0/D1 are the opposite direction, the GNSS UART is dead with no socket-level rework. + 10-minute check against the Pro before ordering. +- **M4. Mechanical fit not evidenced.** Board grew 120×100 → **135×100** on Jul-3; the + "placement review vs HBOX/cabinet mechanicals" gate has no record. Verify HBOX interior, + standoff positions (MH1–4: 3.2 mm, 4–5 mm edge margins), connector clearances (P1 terminal + block + USB-C + JST heights under the shield) before committing. +- **M5. USB routing is functional-grade, not compliant-grade.** DP/DM routed as independent + 0.2 mm traces on *different* layers (DP: F/In1, DM: B/In1), no diff-pair spacing, several + segments ON the In1 GND plane (local plane cuts), no ESD array on the port. For a service + console at Full-Speed it will almost certainly work; don't expect more. Next spin: route as a + pair on one layer, add USBLC6-type ESD. +- **M6. Two fab packages in the tree** — `fab-jlc-usb/` (14:41) is superseded by `production/` + (17:14, includes the title-block change). Delete or archive the stale one so nobody orders it. + +--- + +## 3. LOW — cosmetic / next spin + +- L1. ERC: 95 warnings — ~90 off-grid pin/wire (your own TODO), plus lib-cache drift + (`Q_NPN_BCE` not found, `L` and `AO4406A` mismatch vs library). Fixing H2 touches these anyway. +- L2. DRC: 0 errors, 9 warnings — all lib_footprint mismatches (local overrides) on JST/Phoenix/ + SHT4x/MountingHole. Benign. Note `missing_courtyard` and `track_not_centered_on_via` are + globally ignored (deliberate for the carrier); re-enable once per release to catch strays. +- L3. Title block: rev "1.0", date **2026-06-23** — stale (board materially changed since); + bump date/rev on release. +- L4. MODEM LED: XBee pin 13 is a **1.8 V** output → Rmled 1 k + LED will be dim or dark. + Accept, reduce R, or buffer next spin. +- L5. L7 (3V3_MODEM buck) is 10 µH **2 A** vs module spec "2 A peak" — saturation margin is + thin at worst case; consider a 3 A-rated part next spin. (Delta doc says "1 A/1.5 A pk" — + understates the ArduSimple diagram's 2 A.) +- L6. `SW3_NODE`/`SW_FAN` netclass patterns exist but `SW_IN` was the one that mattered (H4) — + tidy the pattern list while in there. +- L7. In2.Cu carries 336 signal segments and no pour — fine (In1 is solid GND), just wasted + copper; consider a 5 V pour next spin. + +--- + +## 4. Verified GOOD (evidence-backed, not vibes) + +**Fail-safe invariants (the ones that matter for ICAVE):** +- Load switch defaults OFF: R2 10 k pulls Q1 gate to rail; only PA1-driven Q5 can enable → + invariant #1 holds with MCU absent. *(Weakened only by H2 — fix restores full margin.)* +- **K1 Modo-B bypass verified against the Omron datasheet:** coil = pins 2/9 (SYS5V/Q6), + COM = 5&6 (internally doubled — the double DIN_4G net is correct, not a short), **NC = 1 = + F9P TX2** → corrections flow modem-ward with the MCU dead/absent; NO = 10 = PA9. Exactly the + design intent of Block H. RTCM3 downlink (modem DOUT → MOD1 D2 → F9P RX2) is hardwired and + never touches the MCU — invariant #3 in copper. +- Cutoff chain MAIN5V→P11→SYS5V kills MCU *and* stack *and* modem (Blackpill 5V is on SYS5V) ✓. + +**LTC4040 block (pin-by-pin vs datasheet):** VSYS 1/24 ✓ · PROG 825 Ω → 2.42 A ≈ C/5 ✓ · +CLN/RS1 8 mΩ → 3.1 A input limit ✓ · CHGOFF w/ 100 k pull-down = charge-enabled-if-MCU-absent, +NTC still guards ✓ · BSTOFF grounded (backup enabled) ✓ · shared RSTFB/BSTFB divider 499k/100k → +4.79 V backup (sharing explicitly datasheet-endorsed) ✓ · PFI 287k/100k → 4.60 V trip ✓ · +**F-straps decode to F2=1, F1=0, F0=1 = Li-Ion 4.00 V exactly as designed** (JP2/3/4 verified at +net level; LiFePO4 = re-strap JP2 preserved) ✓ · NTC bias R55 from VIN + pack NTC on P4.3 — +charger owns the battery NTC, per doctrine ✓ · OVSNS shorted to VIN (OVP unused, per datasheet) ✓ · +SW→L6 2.2 µH→BAT within spec ✓ · VSYS bulk 104 µF ≥ 100 µF ✓ · RST unused = legal ✓. + +**XBee socket (verified against ArduSimple footprint-R00 diagram, incl. the mirrored row):** +J7: VCC=3V3_MODEM (3.3–3.6 V ✓) · TX/RX=DOUT/DIN_4G ✓ · pin4+10 GND ✓ · RESET→SW4G (open = +always-on) ✓ · **pin6 V_USB / 7 USB+ / 8 USB− = USB-C VBUS/DP/DM ✓** (USB enabled only when a +laptop provides 5 V — elegant). J8 (pads mirror to XBee pins 20…11): ON/OFF→GND (always on) ✓ · +pin15/11 GND ✓ · **pin14 VREF→VCC ✓** · pin13 LED→Rmled/D4G ✓ (see L4) · CTS/RTS/DTR open ✓. +Row spacing 22.35 mm = XBee spec ✓. + +**Rest of the board:** USB-C UFP correct (5.1 k Rd on CC1/CC2; VBUS only to the modem — no rail +backfeed) ✓ · Blackpill J1/J2: all 18 used pins match the documented map (A0 BAT_SENSE … B12–15 +gauge, A9/A10 USART1, B6/B7 I²C, NRST w/ SW1+P10) ✓ · 24 V front-end: SMBJ33A TVS, IRFR5305 +reverse-polarity FET correctly oriented w/ 15 V gate zener ✓ · fan: dedicated buck, UVLO enable +divider, flyback SS34 across the fan, tach DNP provision ✓ · both MP1584 bucks correct (U7 FB +100k/31.6k → 3.33 V) ✓ · sensors: SHT40 + TMP102 (ADD0→GND = 0x48) + 4.7 k pulls + external I²C +probe port P5 ✓ · NTC-hotspot chain to PB1 ✓ · sense dividers ÷2 + filters ✓ · single GND net, +solid In1 plane, closed 135×100 outline, 4×M3.2 holes with sane margins ✓ · netclasses PWR_HI +1.5 mm / PWR_MID 1.0 mm exceed the kicad-guide minimums ✓ · DRC 0 errors / 0 unconnected; +gerber+drill 4-layer set regenerated *after* the last save (17:14 > 17:06) ✓. + +--- + +## 5. Documentation audit ("I need this to be perfect") + +The doc *system* is genuinely good — canonical state doc + delta build-spec + rationale + +ledgers is more than most teams have. But it is now **3–4 days behind the copper**: + +| Doc claim | Board reality | +|---|---| +| DFR1015 on-board conditions ignition; Rig = 100 Ω series from 5 V | **DFR1015 removed**; raw 12–24 V → 22k/10k divider + clamp (and PCB value still says 100R — H3) | +| Board 120 × 100 mm | **135 × 100 mm** (since Jul-3) | +| "J8 all NC"; XBee = VCC/DOUT/DIN/GND only | J7.5–8 = RESET/V_USB/USB±; J8 = ON/OFF, VREF, LED, GNDs | +| No USB-C block in design-state/delta | USB-C J9 + CC + VBUS-to-modem is a major new block (Jul-5) | +| Delta: modem 1 A/1.5 A pk | ArduSimple diagram: **2 A peak** | +| Name `hbox-watchdog-v3-PROD` everywhere | Title block says **EINARBoard HBOX 1.0** — name exists nowhere in the repo docs | +| Title block date 2026-06-23, rev 1.0 | Board changed materially Jul 2–6 | + +**Docs action list:** (1) update design-state §1/§3 (ignition topology, no DFR1015, 22k) · +(2) delta doc: add USB block + real J7/J8 table **including the J8 pad-k = XBee pin-(21−k) +mirror** (that mapping is currently only in the copper — the single most dangerous piece of +undocumented tribal knowledge on this board) · (3) board size + name: register "EINARBoard +HBOX 1.0" in CLAUDE.md directory table + design-state header · (4) BOM: add LCSC column, DNP +attributes on P3/P13/H3 · (5) delete/archive `fab-jlc-usb/` · (6) bump title-block date/rev on +release · (7) log H1–H4 fixes in the delta doc changelog. + +--- + +## 6. Recommended order of operations + +1. Fix H3 schematic wire + value → H2 symbols → H1 Q7 swap (all schematic) → resync to PCB. +2. Add `SW_IN` to PWR_HI, reroute F1→Q1 + the three FET neighborhoods (H4/H1/H2 rework zones). +3. ERC (target: 0 errors) → DRC (0 errors) → regenerate `production/` → **order bare boards.** +4. In parallel: M3 (D0/D1 on a physical Pro) + M4 (mechanical fit) — both are no-cost checks. +5. Docs pass (§5) — 1 h, do it while the fab quote is pending. +6. PCBA later only after M1 (LCSC/DNP) and ideally proto bench results (M2). + +*Audit artifacts: ERC 2026-07-06 (1 err / 95 warn) · DRC 17:09 (0 err / 9 lib warn) · +IPC-D-356 `production/netlist.ipc` 17:14 · sources: ADI 4040fb, Omron K048-E1-07, +ArduSimple 4G-NTRIP-Master-footprint-R00.* diff --git a/03-Architecture-Hardware/4G-USB-Reset-LED-addition.md b/03-Architecture-Hardware/4G-USB-Reset-LED-addition.md index 65f03b5..f3719fd 100644 --- a/03-Architecture-Hardware/4G-USB-Reset-LED-addition.md +++ b/03-Architecture-Hardware/4G-USB-Reset-LED-addition.md @@ -103,3 +103,50 @@ board was reverted to its clean pre-USB state; the schematic is the source of tr 5. **Re-export the JLCPCB fab package** (`fab-jlcpcb/`) — the current zip predates all of this. Backup of the clean board kept at `kicad/hbox-watchdog-v3-PROD.kicad_pcb.bak-preusb`. + +--- + +## STATUS 2026-07-05 (later) — board cleaned, ready to place + route in GUI + +**What happened:** F8 from the (fixed) PROD project pulled in the 6 USB parts **plus 15 +duplicates**, because this project has a **board↔schematic refdes mismatch** (schematic names 18 +parts `Cbst1, Rled1 … D4G1, Rmled1, SW4G1`; the routed board uses the clean names `Cbst, Rled …`). +KiCad saw the schematic names as "missing" and added copies. Cleaned at the file level: + +- Removed the 15 duplicate footprints from the board; renamed my 3 USB parts to clean names. +- **Board = 132 parts, no duplicates, all 6 USB parts present with correct nets (J9 verified: + VBUS×4, GND+shields, CC1/CC2, D+/D− pairs).** Loads clean, electrically sound. +- Backups: `…kicad_pcb.bak-predupclean`, `…kicad_sch.bak-predupclean`, `…kicad_pro.bak-projfix`. + +**F8 is now SAFE (reconciled 2026-07-05).** The schematic's 18 `…1` names were renamed to the +board's clean names (`Cbst1→Cbst … D4G1→D4G, Rmled1→Rmled, SW4G1→SW4G`), so schematic and board +now agree — a future F8 will match by reference and won't duplicate. ERC added **0 new errors** +(one pre-existing "Pin not connected" remains — unrelated; locate it via Inspect→ERC in the GUI). +Backup: `…kicad_sch.bak-prereconcile`. + +**Placement:** the board is packed — no clean ~11 mm hole for J9 (USB-C is ~10.5 mm; the J8 pocket +is ~9 mm, and the lower-right is under U7/C43/Ccomp2). Place J9 where its **pads** clear even if +courtyards "kiss" a neighbor (the board already has by-design kisses) — do it live in the GUI. + +**Net map for routing (ratsnest targets):** + +| Part · pin | Net | Connects to | +|---|---|---| +| J9 A4/A9/B4/B9 | USB_VBUS | **J7 pin 6** | +| J9 A6/B6 | USB_DP | **J7 pin 7** | +| J9 A7/B7 | USB_DM | **J7 pin 8** | +| J9 A5 | USB_CC1 | Rcc1·1 | +| J9 B5 | USB_CC2 | Rcc2·1 | +| J9 GND + 4 shields | GND | plane (via) | +| Rcc1·2, Rcc2·2 | GND | plane | +| SW4G·1 | MODEM_RST | **J7 pin 5** | +| SW4G·2 | GND | plane | +| Rmled·1 | MODEM_LED | **J8 pin 8** | +| Rmled·2 ↔ D4G·anode | MODEM_LED_A | each other | +| D4G·cathode | GND | plane | + +So the USB/reset cluster (J9, Rcc1, Rcc2, SW4G) wants to sit near **J7** (left XBee column); the +LED pair (Rmled, D4G) near **J8 pin 8**. GND pads just drop a via into the In1 plane. + +**Finish:** place the 6 → route (FreeRoute the DSN or hand-route; D+/D− as a pair) → **B** to fill +zones → DRC (expect 0 shorts) → re-export the JLCPCB package. diff --git a/03-Architecture-Hardware/JLCPCB-Order-Guide.md b/03-Architecture-Hardware/JLCPCB-Order-Guide.md new file mode 100644 index 0000000..927cedb --- /dev/null +++ b/03-Architecture-Hardware/JLCPCB-Order-Guide.md @@ -0,0 +1,116 @@ +--- +title: HBOX Watchdog v3 PROD — JLCPCB Order Guide (PCB + Assembly, fastest path) +project: Project Drogheda +date: 2026-07-06 +status: Board fab-ready (0 shorts, 0 unconnected, DRC clean). This is the ordering runbook. +tags: [project-drogheda, hardware, pcb, jlcpcb, assembly, ordering] +--- + +# HBOX Watchdog v3 PROD — JLCPCB Order Guide + +**Board:** `kicad/hbox-watchdog-v3-PROD.kicad_pcb` — **132 footprints, 135.1 × 100.1 mm, +4-layer** (F.Cu / In1.Cu = GND plane / In2.Cu / B.Cu). Verified: **0 shorts, 0 unconnected, +DRC clean** (parity net-name/refdes warnings are cosmetic — the copper is correct). + +Goal: fastest turnaround **with assembly**. The pacing item is always **parts stock** (LCSC), +not the fab — so the checklist front-loads that. + +--- + +## Step 1 — Generate the fab files (in KiCad) + +Fastest, least error-prone: install the **"JLCPCB Fabrication Toolkit"** KiCad plugin +(Plugin and Content Manager → search "Fabrication Toolkit", by Bennymeg). One click produces a +`production/` folder with **Gerbers.zip + BOM.csv + CPL(positions).csv already in JLC's format** +(correct rotations, LCSC column). This is the recommended route. + +Manual route if you prefer: +- **Gerbers + drill:** File → Fabrication Outputs → Gerbers → include all copper + Edge.Cuts + + silk + mask + paste; then Drill Files (PTH+NPTH, Excellon, mm). Zip everything together. +- **Placement / CPL:** File → Fabrication Outputs → Component Placement → CSV, **mm**, both sides. +- **BOM:** Tools → Generate Legacy BOM (or the JLC toolkit). Must carry an **LCSC part number** + per assembled part. + +--- + +## Step 2 — Order the bare PCB (JLCPCB PCB settings) + +Upload the Gerber zip; JLC auto-reads size/layers. Set: + +| Setting | Value | Note | +|---|---|---| +| Layers | **4** | required — In1 is the GND plane | +| Dimensions | 135.1 × 100.1 mm | auto-detected | +| Thickness | **1.6 mm** | JLC applies its standard 4-layer stackup | +| Material | FR-4 | | +| Surface finish | **ENIG** (recommended) | you have a QFN (LTC4040) + fine-pitch — ENIG solders far better than HASL. +~$ / +1 day | +| Outer copper | 1 oz | standard | +| Min track/space | 0.15 mm present | well within JLC 4-layer (they do 0.09 mm) | +| Impedance control | **No** | USB2 is low-speed here; not routed as controlled-impedance | +| Via / tenting | Tented (default) | | + +--- + +## Step 3 — Assembly (turn on "PCB Assembly") + +- **Assembly side:** Top (bulk of SMD is top-side). +- **PCBA type:** **Standard** (you have a QFN + fine-pitch + SOIC-EP; Economic can't place those). +- Upload the **BOM.csv** and **CPL/positions.csv**. JLC matches parts by **LCSC #**. + +### What JLC assembles vs. what you don't — three buckets + +**A. JLC solders (SMD) — YES.** ~98 SMD parts: all 0603/0805 R & C, the LEDs, SOT-23 FETs +(Q1/Q2/Q4/Q5/Q6 + AO3401/AO3400), **LTC4040 (QFN-24)**, **2× MP1584EN (SOIC-8-EP)**, AO4406A, +IRFR5305, **SHT40 + TMP102**, SS34/BAT54/Zeners, Bourns SRU8028 inductors, PPTC fuse, the new +**USB-C (J9), 2× 5.1k CC, tactile reset (SW4G), LED + 1k**. These need LCSC numbers (Step 3b). + +**THT parts — assemble only if worth it.** Connectors (Phoenix P1, JST P2/P3/P5/P6/P8/P10/P12/P13), +the 3 module sockets (J1/J2 Blackpill, MOD1 Arduino, J7/J8 XBee 2 mm), K1 relay (G5V-1), SW1 +tactile, radial electrolytics (C3/C10/C43). JLC charges a per-joint THT fee + some of these +(Phoenix, big JSTs) aren't in their library. +→ **Recommended for speed + cost: JLC does SMD only; you hand-solder the THT.** It's ~20 through-hole +parts and keeps the order simple. + +**B. Modules — DO NOT put on the JLC BOM.** Blackpill (into J1/J2), simpleRTK2B Pro (into MOD1), +4G NTRIP Master (into J7/J8). You hand-fit these after the PCBA arrives. Mark them DNP/excluded. + +**DNP to confirm:** engineering notes flagged **P3 / P13 / H3** as redundant (Modo-B + K1 bypass). +Decide per-connector before ordering — mark DNP in the BOM if dropping them. + +### Step 3b — LCSC part numbers (the real pre-order task) + +Every assembled part needs an **LCSC #** in the BOM. This is the bottleneck, so: +- Assign LCSC #s in KiCad (add an `LCSC` field per symbol) **or** paste them in JLC's BOM editor + after upload (it suggests matches). +- **Prefer JLC "Basic" parts** (0603/0805 R & C, common SOT-23, LEDs) — no extended-part fee, no + reel-loading delay. +- **Check stock now for the specialty parts** — these decide your lead time: + **LTC4040EUFD, SHT40-AD1B, TMP102, MP1584EN, AO4406A, IRFR5305, Bourns SRU8028 (2.2/10 µH)**. + If any is out of stock → pick an LCSC alternate, or pull it to hand-solder, rather than let the + whole order wait on one part. + +--- + +## Step 4 — Fastest turnaround levers + +- **Parts stock is the pacing item.** One out-of-stock LCSC part holds the entire PCBA. Verify + stock before you submit; swap or hand-solder anything back-ordered. +- Bare 4-layer fab is ~2–3 days; PCBA adds ~2–5 days depending on parts + review. +- ENIG costs ~1 day vs HASL — keep ENIG (worth it for the QFN); the day is minor next to parts lead time. +- Order **5 pcs** (JLC minimum) — right for this proto run; you need ~3–4 anyway. +- Respond fast to JLC's DFM/part-substitution review email (that's often where days are lost). + +--- + +## Pre-order checklist + +- [ ] `production/` folder generated (Gerbers.zip + BOM.csv + CPL.csv) — Fabrication Toolkit. +- [ ] BOM: SMD parts each have an in-stock **LCSC #**; **modules excluded**; **P3/P13/H3 DNP** decided. +- [ ] Specialty parts (LTC4040, SHT40, TMP102, MP1584, AO4406A, Bourns L) — **stock confirmed** or swapped. +- [ ] Decide **THT: JLC-assemble vs hand-solder** (recommend hand-solder the ~20 THT). +- [ ] Spot-check a few CPL **rotations** against JLC's library (QFN/SOIC/SOT-23 orientation) — the + #1 PCBA error. The Fabrication Toolkit usually gets these right; verify LTC4040 and the MP1584s. +- [ ] PCB: **4-layer, 1.6 mm, ENIG**. +- [ ] Order 5 pcs. + +Reference: part buckets in `Assembly-BOM-Split.md`. Board file: `kicad/hbox-watchdog-v3-PROD.kicad_pcb`. diff --git a/03-Architecture-Hardware/LCSC-search-list.md b/03-Architecture-Hardware/LCSC-search-list.md new file mode 100644 index 0000000..add5a9b --- /dev/null +++ b/03-Architecture-Hardware/LCSC-search-list.md @@ -0,0 +1,85 @@ +--- +title: HBOX Watchdog v3 PROD — LCSC / JLC Assembly Parts List +project: Project Drogheda +date: 2026-07-06 +status: §1 specialty parts VERIFIED against JLC live stock (2026-07-06). Passives/common semis → JLC auto-match. LCSC filled into production/HBOX_v3_PROD_bom.csv. +tags: [project-drogheda, hardware, pcb, jlcpcb, bom, lcsc] +--- + +# HBOX Watchdog v3 PROD — LCSC parts list (for JLC assembly) + +**Quantities are per board** — JLC multiplies by your order qty (5). LCSC `C…` numbers below were +pulled from JLC's live parts search on **2026-07-06**; stock moves, so re-confirm at upload. + +--- + +## ⚠️ Three decisions to make before ordering + +1. **Inductors L2/L6/L7 — the Bourns SRU8028 are OUT OF STOCK at JLC** (pre-order only). I found + in-stock **Sunlord MWSA0804** drop-in candidates below — but they're **8.8×8.2 mm** vs your + footprint's **8.0×8.0 mm**. Confirm the pads overlap (they usually do for 2-pad molded 8×8s) + before you commit, or pre-order the exact Bourns (adds weeks). The Sunlord are actually + **higher-rated** (10 µH @6.5 A, 2.2 µH @14 A vs Bourns 2.2 A / 8 A). +2. **F1 PPTC voltage** — pick the rating for the rail F1 sits on. If it's on the **24 V** input, + use the 24 V part; if on a **5 V / battery** node, the genuine Littelfuse 6 V is fine. +3. **MP1584EN (U2/U7)** has only **one in-stock** variant (C15051, SOIC-8-EP) — everything else is + pre-order/consign. Fine, just don't let auto-match pick a 0-stock clone. + +--- + +## §1 — Specialty parts — VERIFIED LCSC (live JLC, 2026-07-06) + +| Ref(s) | Qty | LCSC # | MFR Part | Pkg | Type · Stock | Notes | +|---|---|---|---|---|---|---| +| **U6** | 1 | **C687163** | LTC4040EUFD#TRPBF (ADI) | QFN-24 4×5 | Ext · 2341 | The critical charger IC. | +| **U2, U7** | 2 | **C15051** | MP1584EN-LF-Z (MPS) | SOIC-8-EP | Ext · 10527 | Only in-stock variant. | +| **U3** | 1 | **C2848306** | SHT40-AD1B-R3 (Sensirion) | DFN-4 1.5×1.5 | Ext · 9534 | R2 alt: C2909890 (stock 12772). | +| **U4** | 1 | **C99269** | TMP102AIDRLR (TI) | SOT-563 | Ext · 898 | Cheaper high-stock UMW clone: C5692997 (10143). | +| **L2, L7** | 2 | **C17700171** | MWSA0804S-100MT (Sunlord) | 8.8×8.2 | Ext · 109 | 10 µH 6.5 A — **SUB** for SRU8028-100Y; verify pads. | +| **L6** | 1 | **C17700165** | MWSA0804S-2R2MT (Sunlord) | 8.8×8.2 | Ext · 261 | 2.2 µH 14 A — **SUB** for SRU8028-2R2Y; verify pads. | +| **Q10** | 1 | **C2624** | IRFR5305TRPBF (Infineon) | DPAK/TO-252 | Ext · 45808 | Genuine Infineon, huge stock. | +| **Q7** | 1 | **C35349** | AO4406AL (AOS) | SOIC-8 | Ext · 2039 | Cheap high-stock UMW: C2944312 (62071). | +| **RS1** | 1 | **C7420012** | FRM121WFR008TM (FOJAN) | 1206 | Ext · 20959 | 8 mΩ 1 W ±1% sense. Premium alt: Vishay WSLP C2076276. | +| **D10** | 1 | **C224019** | SMBJ33A (Littelfuse) | SMB DO-214AA | Ext · 28875 | Cheapest high-stock: C353366 (Jingdao). | +| **DZG** | 1 | **C80857** | BZX84C15LT1G (onsemi) | SOT-23 | Ext · 26047 | 15 V zener. | +| **F1** | 1 | **C20627123** | 1812L300/24GR (LUTE) | 1812 | Ext · 69432 | PPTC 3 A **24 V**. If node ≤6 V use genuine Littelfuse **C127824** (6 V). | +| **SW4G** | 1 | **C2689642** | PTS636SK25SMTRLFS (C&K) | SMD 6×3.5 | Ext · 7882 | Reset button. Gull-wing SMD — confirm vs footprint pads. | + +--- + +## §2 — Common semiconductors → JLC **Basic**, let auto-match fill (search MPN to confirm) + +| Ref(s) | Qty | MFR Part | Pkg | +|---|---|---|---| +| Q1 | 1 | AO3401A (P-ch) | SOT-23 | +| Q2, Q4 | 2 | AO3400A (N-ch) | SOT-23 | +| Q5, Q6 | 2 | MMBT3904 (NPN) | SOT-23 | +| D2, DBK, DBK2 | 3 | SS34 (40 V 3 A Schottky) | SMA | +| D5 | 1 | BAT54 | SOD-123 | +| D6 | 1 | 1N4148W | SOD-123 | +| D1, D4G, DB1–DB4 | 6 | LED 0805 | 0805 — pick color per function | + +> These are all JLC Basic/common; on BOM upload JLC auto-suggests an in-stock part. Want me to +> fill exact LCSC #s for these too? Say the word. + +--- + +## §3 — Resistors (0603 — auto-match, or pick any Basic) + +**Standard (5%):** 1 k ×5 · 10 k ×10 · 100 k ×8 · 4.7 k ×2 · 330 R ×4 · 5.1 k ×2 · 40.2 k ×2 · 100 R ×2 · 22 k · 20 k +**Precision 1% (0603):** 19.1 k · 10 k ×2 · **825 R (R50, LTC4040 PROG)** · 287 k · 100 k ×3 · 499 k · 31.6 k + +## §4 — Capacitors (auto-match; confirm voltages) + +100 nF 0603 ×7 · 10 nF 0603 ×2 · 2.2 nF 0603 ×2 · 2.2 µF 0603 · 10 µF 0805 ×2 · 22 µF 0805 ×3 (≥16 V) · +22 µF/16 V 0805 · 22 µF/50 V 1210 · 47 µF 1210 ×2 (≥25 V) · **electrolytics** 47 µF/50 V (C10), 47 µF (C3), 100 µF/6.3 V (C43) — 6.3×7.7 body, verify fit. + +--- + +## §5 — Do NOT put on the JLC SMD BOM + +**Hand-solder (THT):** Phoenix **P1** · JST **P2, P4, P5, P6, P8, P10, P11, P12** · sockets **J1, J2** (2.54) · **J7, J8** (2.0) · **MOD1** (Pro headers) · relay **K1** · tactile **SW1**. +**No part:** MH1–MH4 · TP1, TP2 · JP1–JP4. +**Modules (plug in after):** Blackpill → J1/J2 · simpleRTK2B Pro → MOD1 · 4G NTRIP Master → J7/J8. +**J9 USB-C (USB4085):** hand-solder recommended (or search `USB4085` to have JLC place it). +**DNP — drop before assembly:** **P3, P13, H3** (set the real DNP flag or delete their BOM rows; THT anyway). diff --git a/03-Architecture-Hardware/hbox-watchdog-v3-PROD-blueprints.pdf b/03-Architecture-Hardware/hbox-watchdog-v3-PROD-blueprints.pdf new file mode 100644 index 0000000..d8dcd78 Binary files /dev/null and b/03-Architecture-Hardware/hbox-watchdog-v3-PROD-blueprints.pdf differ diff --git a/03-Architecture-Hardware/hbox-watchdog-v3-PROD-schematic.pdf b/03-Architecture-Hardware/hbox-watchdog-v3-PROD-schematic.pdf new file mode 100644 index 0000000..a257d03 Binary files /dev/null and b/03-Architecture-Hardware/hbox-watchdog-v3-PROD-schematic.pdf differ diff --git a/03-Architecture-Hardware/kicad/.step b/03-Architecture-Hardware/kicad/.step new file mode 100644 index 0000000..abceada --- /dev/null +++ b/03-Architecture-Hardware/kicad/.step @@ -0,0 +1,325043 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('KiCad electronic assembly'),'2;1'); +FILE_NAME('.step','2026-07-06T16:04:43',('Pcbnew'),('Kicad'), + 'Open CASCADE STEP processor 7.9','KiCad to STEP converter','Unknown' + ); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('.step 1','.step 1','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23,#27,#31,#35,#39,#43,#47, + #51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111, + #115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163, + #167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215, + #219,#223,#227,#231,#235,#239,#243,#247,#251,#255,#259,#263,#267, + #271,#275,#279,#283,#287,#291,#295,#299,#303,#307,#311,#315,#319, + #323,#327,#331,#335,#339,#343,#347,#351,#355,#359,#363,#367,#371, + #375,#379,#383,#387,#391,#395,#399,#403,#407,#411,#415,#419,#423, + #427,#431,#435,#439,#443,#447,#451,#455,#459,#463,#467,#471,#475, + #479,#483,#487,#491,#495,#499,#503,#507,#511),#515); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18); +#16 = CARTESIAN_POINT('',(167.36665,-59.3231,1.595)); +#17 = DIRECTION('',(0.,0.,1.)); +#18 = DIRECTION('',(1.,0.,0.)); +#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22); +#20 = CARTESIAN_POINT('',(116.19165,-46.3231,1.595)); +#21 = DIRECTION('',(0.,0.,1.)); +#22 = DIRECTION('',(1.,0.,0.)); +#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26); +#24 = CARTESIAN_POINT('',(101.36665,-74.3231,1.595)); +#25 = DIRECTION('',(0.,0.,1.)); +#26 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27 = AXIS2_PLACEMENT_3D('',#28,#29,#30); +#28 = CARTESIAN_POINT('',(168.19165,-65.8231,1.595)); +#29 = DIRECTION('',(-0.,0.,1.)); +#30 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#31 = AXIS2_PLACEMENT_3D('',#32,#33,#34); +#32 = CARTESIAN_POINT('',(210.19165,-61.8231,1.595)); +#33 = DIRECTION('',(0.,-0.,1.)); +#34 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(178.19165,-59.3231,1.595)); +#37 = DIRECTION('',(0.,0.,1.)); +#38 = DIRECTION('',(1.,0.,0.)); +#39 = AXIS2_PLACEMENT_3D('',#40,#41,#42); +#40 = CARTESIAN_POINT('',(198.25415,-44.3231,1.595)); +#41 = DIRECTION('',(0.,0.,1.)); +#42 = DIRECTION('',(1.,0.,0.)); +#43 = AXIS2_PLACEMENT_3D('',#44,#45,#46); +#44 = CARTESIAN_POINT('',(210.19165,-108.3231,1.595)); +#45 = DIRECTION('',(0.,-0.,1.)); +#46 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47 = AXIS2_PLACEMENT_3D('',#48,#49,#50); +#48 = CARTESIAN_POINT('',(210.16665,-80.0731,1.595)); +#49 = DIRECTION('',(0.,-0.,1.)); +#50 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51 = AXIS2_PLACEMENT_3D('',#52,#53,#54); +#52 = CARTESIAN_POINT('',(175.84165,-53.4731,1.595)); +#53 = DIRECTION('',(-0.,0.,1.)); +#54 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(197.62165,-112.5731,1.595)); +#57 = DIRECTION('',(0.,0.,1.)); +#58 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62); +#60 = CARTESIAN_POINT('',(194.25415,-44.3231,1.595)); +#61 = DIRECTION('',(0.,0.,1.)); +#62 = DIRECTION('',(1.,0.,0.)); +#63 = AXIS2_PLACEMENT_3D('',#64,#65,#66); +#64 = CARTESIAN_POINT('',(107.19165,-56.3231,1.595)); +#65 = DIRECTION('',(0.,-0.,1.)); +#66 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70); +#68 = CARTESIAN_POINT('',(187.96665,-114.8231,1.595)); +#69 = DIRECTION('',(0.,0.,1.)); +#70 = DIRECTION('',(1.,0.,0.)); +#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74); +#72 = CARTESIAN_POINT('',(92.24165,-112.3231,1.595)); +#73 = DIRECTION('',(0.,0.,1.)); +#74 = DIRECTION('',(1.,0.,0.)); +#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78); +#76 = CARTESIAN_POINT('',(135.79165,-46.3231,1.595)); +#77 = DIRECTION('',(0.,0.,1.)); +#78 = DIRECTION('',(1.,0.,0.)); +#79 = AXIS2_PLACEMENT_3D('',#80,#81,#82); +#80 = CARTESIAN_POINT('',(138.65,-60.9,1.595)); +#81 = DIRECTION('',(0.,0.,1.)); +#82 = DIRECTION('',(1.,0.,0.)); +#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86); +#84 = CARTESIAN_POINT('',(94.19165,-94.3231,1.595)); +#85 = DIRECTION('',(0.,0.,1.)); +#86 = DIRECTION('',(1.,0.,0.)); +#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90); +#88 = CARTESIAN_POINT('',(112.71665,-87.2281,1.595)); +#89 = DIRECTION('',(0.,0.,1.)); +#90 = DIRECTION('',(1.,0.,0.)); +#91 = AXIS2_PLACEMENT_3D('',#92,#93,#94); +#92 = CARTESIAN_POINT('',(130.99165,-104.3231,1.595)); +#93 = DIRECTION('',(0.,0.,1.)); +#94 = DIRECTION('',(1.,0.,0.)); +#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98); +#96 = CARTESIAN_POINT('',(128.91665,-112.3231,1.595)); +#97 = DIRECTION('',(0.,0.,1.)); +#98 = DIRECTION('',(1.,0.,0.)); +#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102); +#100 = CARTESIAN_POINT('',(179.51665,-111.8231,1.595)); +#101 = DIRECTION('',(0.,0.,1.)); +#102 = DIRECTION('',(1.,0.,0.)); +#103 = AXIS2_PLACEMENT_3D('',#104,#105,#106); +#104 = CARTESIAN_POINT('',(203.05,-84.45,1.595)); +#105 = DIRECTION('',(0.,0.,1.)); +#106 = DIRECTION('',(1.,0.,0.)); +#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110); +#108 = CARTESIAN_POINT('',(179.69165,-96.3231,1.595)); +#109 = DIRECTION('',(-0.,0.,1.)); +#110 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#111 = AXIS2_PLACEMENT_3D('',#112,#113,#114); +#112 = CARTESIAN_POINT('',(174.19165,-74.8231,1.595)); +#113 = DIRECTION('',(0.,0.,1.)); +#114 = DIRECTION('',(1.,0.,0.)); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(94.19165,-98.3231,1.595)); +#117 = DIRECTION('',(0.,0.,1.)); +#118 = DIRECTION('',(1.,0.,0.)); +#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122); +#120 = CARTESIAN_POINT('',(100.19165,-88.3231,1.595)); +#121 = DIRECTION('',(0.,0.,1.)); +#122 = DIRECTION('',(1.,0.,0.)); +#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126); +#124 = CARTESIAN_POINT('',(132.91665,-112.3231,1.595)); +#125 = DIRECTION('',(0.,0.,1.)); +#126 = DIRECTION('',(1.,0.,0.)); +#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130); +#128 = CARTESIAN_POINT('',(97.86665,-107.3231,1.595)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DIRECTION('',(1.,0.,0.)); +#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134); +#132 = CARTESIAN_POINT('',(179.51665,-102.3231,1.595)); +#133 = DIRECTION('',(0.,0.,1.)); +#134 = DIRECTION('',(1.,0.,0.)); +#135 = AXIS2_PLACEMENT_3D('',#136,#137,#138); +#136 = CARTESIAN_POINT('',(110.91665,-112.3231,1.595)); +#137 = DIRECTION('',(0.,0.,1.)); +#138 = DIRECTION('',(1.,0.,0.)); +#139 = AXIS2_PLACEMENT_3D('',#140,#141,#142); +#140 = CARTESIAN_POINT('',(91.19165,-61.8231,1.595)); +#141 = DIRECTION('',(0.,0.,1.)); +#142 = DIRECTION('',(1.,0.,0.)); +#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146); +#144 = CARTESIAN_POINT('',(175.84165,-48.6231,1.595)); +#145 = DIRECTION('',(-0.,0.,1.)); +#146 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#147 = AXIS2_PLACEMENT_3D('',#148,#149,#150); +#148 = CARTESIAN_POINT('',(145.45,-60.2,1.595)); +#149 = DIRECTION('',(0.,0.,1.)); +#150 = DIRECTION('',(1.,0.,0.)); +#151 = AXIS2_PLACEMENT_3D('',#152,#153,#154); +#152 = CARTESIAN_POINT('',(96.19165,-116.3231,1.595)); +#153 = DIRECTION('',(0.,0.,1.)); +#154 = DIRECTION('',(1.,0.,0.)); +#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158); +#156 = CARTESIAN_POINT('',(127.19165,-46.3231,1.595)); +#157 = DIRECTION('',(0.,0.,1.)); +#158 = DIRECTION('',(1.,0.,0.)); +#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162); +#160 = CARTESIAN_POINT('',(173.86665,-45.3231,1.595)); +#161 = DIRECTION('',(0.,0.,1.)); +#162 = DIRECTION('',(1.,0.,0.)); +#163 = AXIS2_PLACEMENT_3D('',#164,#165,#166); +#164 = CARTESIAN_POINT('',(187.91665,-109.8231,1.595)); +#165 = DIRECTION('',(0.,0.,1.)); +#166 = DIRECTION('',(1.,0.,0.)); +#167 = AXIS2_PLACEMENT_3D('',#168,#169,#170); +#168 = CARTESIAN_POINT('',(96.86665,-102.3231,1.595)); +#169 = DIRECTION('',(0.,0.,1.)); +#170 = DIRECTION('',(1.,0.,0.)); +#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174); +#172 = CARTESIAN_POINT('',(106.19165,-96.3231,1.595)); +#173 = DIRECTION('',(0.,0.,1.)); +#174 = DIRECTION('',(1.,0.,0.)); +#175 = AXIS2_PLACEMENT_3D('',#176,#177,#178); +#176 = CARTESIAN_POINT('',(168.41665,-45.3231,1.595)); +#177 = DIRECTION('',(0.,0.,1.)); +#178 = DIRECTION('',(1.,0.,0.)); +#179 = AXIS2_PLACEMENT_3D('',#180,#181,#182); +#180 = CARTESIAN_POINT('',(111.19165,-46.3231,1.595)); +#181 = DIRECTION('',(0.,0.,1.)); +#182 = DIRECTION('',(1.,0.,0.)); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(130.19165,-96.3231,1.595)); +#185 = DIRECTION('',(0.,0.,1.)); +#186 = DIRECTION('',(1.,0.,0.)); +#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190); +#188 = CARTESIAN_POINT('',(130.31165,-117.6731,1.595)); +#189 = DIRECTION('',(0.,0.,1.)); +#190 = DIRECTION('',(1.,0.,0.)); +#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194); +#192 = CARTESIAN_POINT('',(202.25415,-48.3231,1.595)); +#193 = DIRECTION('',(0.,0.,1.)); +#194 = DIRECTION('',(1.,0.,0.)); +#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198); +#196 = CARTESIAN_POINT('',(101.59165,-83.3231,1.595)); +#197 = DIRECTION('',(0.,0.,1.)); +#198 = DIRECTION('',(1.,0.,0.)); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(148.175,-135.6,1.595)); +#201 = DIRECTION('',(0.,0.,1.)); +#202 = DIRECTION('',(1.,0.,0.)); +#203 = AXIS2_PLACEMENT_3D('',#204,#205,#206); +#204 = CARTESIAN_POINT('',(196.54165,-74.8231,1.595)); +#205 = DIRECTION('',(0.,0.,1.)); +#206 = DIRECTION('',(1.,0.,0.)); +#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210); +#208 = CARTESIAN_POINT('',(169.21665,-52.7281,1.595)); +#209 = DIRECTION('',(0.,0.,1.)); +#210 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#211 = AXIS2_PLACEMENT_3D('',#212,#213,#214); +#212 = CARTESIAN_POINT('',(206.25415,-48.3231,1.595)); +#213 = DIRECTION('',(0.,0.,1.)); +#214 = DIRECTION('',(1.,0.,0.)); +#215 = AXIS2_PLACEMENT_3D('',#216,#217,#218); +#216 = CARTESIAN_POINT('',(161.69165,-45.2981,1.595)); +#217 = DIRECTION('',(0.,-0.,1.)); +#218 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#219 = AXIS2_PLACEMENT_3D('',#220,#221,#222); +#220 = CARTESIAN_POINT('',(179.51665,-107.3231,1.595)); +#221 = DIRECTION('',(0.,0.,1.)); +#222 = DIRECTION('',(1.,0.,0.)); +#223 = AXIS2_PLACEMENT_3D('',#224,#225,#226); +#224 = CARTESIAN_POINT('',(161.425,-124.75,1.595)); +#225 = DIRECTION('',(0.,-0.,1.)); +#226 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#227 = AXIS2_PLACEMENT_3D('',#228,#229,#230); +#228 = CARTESIAN_POINT('',(163.86665,-59.3231,1.595)); +#229 = DIRECTION('',(0.,0.,1.)); +#230 = DIRECTION('',(1.,0.,0.)); +#231 = AXIS2_PLACEMENT_3D('',#232,#233,#234); +#232 = CARTESIAN_POINT('',(98.19165,-46.3231,1.595)); +#233 = DIRECTION('',(0.,0.,1.)); +#234 = DIRECTION('',(1.,0.,0.)); +#235 = AXIS2_PLACEMENT_3D('',#236,#237,#238); +#236 = CARTESIAN_POINT('',(202.25415,-44.3231,1.595)); +#237 = DIRECTION('',(0.,0.,1.)); +#238 = DIRECTION('',(1.,0.,0.)); +#239 = AXIS2_PLACEMENT_3D('',#240,#241,#242); +#240 = CARTESIAN_POINT('',(198.69165,-103.2731,1.595)); +#241 = DIRECTION('',(-0.,0.,1.)); +#242 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#243 = AXIS2_PLACEMENT_3D('',#244,#245,#246); +#244 = CARTESIAN_POINT('',(101.86665,-107.3231,1.595)); +#245 = DIRECTION('',(0.,0.,1.)); +#246 = DIRECTION('',(1.,0.,0.)); +#247 = AXIS2_PLACEMENT_3D('',#248,#249,#250); +#248 = CARTESIAN_POINT('',(95.41665,-112.3231,1.595)); +#249 = DIRECTION('',(0.,0.,1.)); +#250 = DIRECTION('',(1.,0.,0.)); +#251 = AXIS2_PLACEMENT_3D('',#252,#253,#254); +#252 = CARTESIAN_POINT('',(99.19165,-94.3231,1.595)); +#253 = DIRECTION('',(0.,0.,1.)); +#254 = DIRECTION('',(1.,0.,0.)); +#255 = AXIS2_PLACEMENT_3D('',#256,#257,#258); +#256 = CARTESIAN_POINT('',(210.16665,-70.8231,1.595)); +#257 = DIRECTION('',(0.,-0.,1.)); +#258 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#259 = AXIS2_PLACEMENT_3D('',#260,#261,#262); +#260 = CARTESIAN_POINT('',(178.19165,-64.8231,1.595)); +#261 = DIRECTION('',(0.,0.,1.)); +#262 = DIRECTION('',(1.,0.,0.)); +#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266); +#264 = CARTESIAN_POINT('',(206.25415,-44.3231,1.595)); +#265 = DIRECTION('',(0.,0.,1.)); +#266 = DIRECTION('',(1.,0.,0.)); +#267 = AXIS2_PLACEMENT_3D('',#268,#269,#270); +#268 = CARTESIAN_POINT('',(198.25415,-48.3231,1.595)); +#269 = DIRECTION('',(0.,0.,1.)); +#270 = DIRECTION('',(1.,0.,0.)); +#271 = AXIS2_PLACEMENT_3D('',#272,#273,#274); +#272 = CARTESIAN_POINT('',(165.4,-124.75,1.595)); +#273 = DIRECTION('',(0.,-0.,1.)); +#274 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#275 = AXIS2_PLACEMENT_3D('',#276,#277,#278); +#276 = CARTESIAN_POINT('',(100.19165,-116.3231,1.595)); +#277 = DIRECTION('',(0.,0.,1.)); +#278 = DIRECTION('',(1.,0.,0.)); +#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282); +#280 = CARTESIAN_POINT('',(100.86665,-102.3231,1.595)); +#281 = DIRECTION('',(0.,0.,1.)); +#282 = DIRECTION('',(1.,0.,0.)); +#283 = AXIS2_PLACEMENT_3D('',#284,#285,#286); +#284 = CARTESIAN_POINT('',(124.91665,-112.3231,1.595)); +#285 = DIRECTION('',(0.,0.,1.)); +#286 = DIRECTION('',(1.,0.,0.)); +#287 = AXIS2_PLACEMENT_3D('',#288,#289,#290); +#288 = CARTESIAN_POINT('',(98.74165,-112.3231,1.595)); +#289 = DIRECTION('',(0.,0.,1.)); +#290 = DIRECTION('',(1.,0.,0.)); +#291 = AXIS2_PLACEMENT_3D('',#292,#293,#294); +#292 = CARTESIAN_POINT('',(210.19165,-121.3231,1.595)); +#293 = DIRECTION('',(0.,-0.,1.)); +#294 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298); +#296 = CARTESIAN_POINT('',(120.66665,-104.3231,1.595)); +#297 = DIRECTION('',(0.,0.,1.)); +#298 = DIRECTION('',(1.,0.,0.)); +#299 = AXIS2_PLACEMENT_3D('',#300,#301,#302); +#300 = CARTESIAN_POINT('',(161.175,-129.425,1.595)); +#301 = DIRECTION('',(0.,0.,1.)); +#302 = DIRECTION('',(1.,0.,0.)); +#303 = AXIS2_PLACEMENT_3D('',#304,#305,#306); +#304 = CARTESIAN_POINT('',(92.75415,-105.8231,1.595)); +#305 = DIRECTION('',(0.,0.,1.)); +#306 = DIRECTION('',(1.,0.,0.)); +#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310); +#308 = CARTESIAN_POINT('',(172.69165,-133.8231,1.595)); +#309 = DIRECTION('',(0.,0.,1.)); +#310 = DIRECTION('',(1.,0.,0.)); +#311 = AXIS2_PLACEMENT_3D('',#312,#313,#314); +#312 = CARTESIAN_POINT('',(108.36665,-102.3231,1.595)); +#313 = DIRECTION('',(0.,0.,1.)); +#314 = DIRECTION('',(1.,0.,0.)); +#315 = AXIS2_PLACEMENT_3D('',#316,#317,#318); +#316 = CARTESIAN_POINT('',(189.28415,-55.8656,1.595)); +#317 = DIRECTION('',(0.,0.,1.)); +#318 = DIRECTION('',(1.,0.,0.)); +#319 = AXIS2_PLACEMENT_3D('',#320,#321,#322); +#320 = CARTESIAN_POINT('',(107.19165,-74.1031,1.595)); +#321 = DIRECTION('',(0.,-0.,1.)); +#322 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#323 = AXIS2_PLACEMENT_3D('',#324,#325,#326); +#324 = CARTESIAN_POINT('',(105.86665,-107.3231,1.595)); +#325 = DIRECTION('',(0.,0.,1.)); +#326 = DIRECTION('',(1.,0.,0.)); +#327 = AXIS2_PLACEMENT_3D('',#328,#329,#330); +#328 = CARTESIAN_POINT('',(162.19165,-51.2231,1.595)); +#329 = DIRECTION('',(0.,0.,1.)); +#330 = DIRECTION('',(1.,0.,0.)); +#331 = AXIS2_PLACEMENT_3D('',#332,#333,#334); +#332 = CARTESIAN_POINT('',(185.19165,-122.3231,1.595)); +#333 = DIRECTION('',(0.,0.,1.)); +#334 = DIRECTION('',(1.,0.,0.)); +#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338); +#336 = CARTESIAN_POINT('',(99.19165,-61.3231,1.595)); +#337 = DIRECTION('',(0.,0.,1.)); +#338 = DIRECTION('',(1.,0.,0.)); +#339 = AXIS2_PLACEMENT_3D('',#340,#341,#342); +#340 = CARTESIAN_POINT('',(178.36665,-69.3231,1.595)); +#341 = DIRECTION('',(-0.,0.,1.)); +#342 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#343 = AXIS2_PLACEMENT_3D('',#344,#345,#346); +#344 = CARTESIAN_POINT('',(114.91665,-112.3231,1.595)); +#345 = DIRECTION('',(0.,0.,1.)); +#346 = DIRECTION('',(1.,0.,0.)); +#347 = AXIS2_PLACEMENT_3D('',#348,#349,#350); +#348 = CARTESIAN_POINT('',(121.74165,-94.3231,1.595)); +#349 = DIRECTION('',(0.,0.,1.)); +#350 = DIRECTION('',(1.,0.,0.)); +#351 = AXIS2_PLACEMENT_3D('',#352,#353,#354); +#352 = CARTESIAN_POINT('',(90.19165,-54.3231,1.595)); +#353 = DIRECTION('',(0.,0.,1.)); +#354 = DIRECTION('',(1.,0.,0.)); +#355 = AXIS2_PLACEMENT_3D('',#356,#357,#358); +#356 = CARTESIAN_POINT('',(134.86665,-91.3231,1.595)); +#357 = DIRECTION('',(0.,0.,1.)); +#358 = DIRECTION('',(1.,0.,0.)); +#359 = AXIS2_PLACEMENT_3D('',#360,#361,#362); +#360 = CARTESIAN_POINT('',(104.86665,-102.3231,1.595)); +#361 = DIRECTION('',(0.,0.,1.)); +#362 = DIRECTION('',(1.,0.,0.)); +#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366); +#364 = CARTESIAN_POINT('',(89.69165,-71.8231,1.595)); +#365 = DIRECTION('',(0.,0.,1.)); +#366 = DIRECTION('',(1.,0.,0.)); +#367 = AXIS2_PLACEMENT_3D('',#368,#369,#370); +#368 = CARTESIAN_POINT('',(179.69165,-116.3231,1.595)); +#369 = DIRECTION('',(0.,0.,1.)); +#370 = DIRECTION('',(1.,0.,0.)); +#371 = AXIS2_PLACEMENT_3D('',#372,#373,#374); +#372 = CARTESIAN_POINT('',(199.19165,-133.3231,1.595)); +#373 = DIRECTION('',(0.,0.,1.)); +#374 = DIRECTION('',(1.,0.,0.)); +#375 = AXIS2_PLACEMENT_3D('',#376,#377,#378); +#376 = CARTESIAN_POINT('',(134.99165,-104.3231,1.595)); +#377 = DIRECTION('',(0.,0.,1.)); +#378 = DIRECTION('',(1.,0.,0.)); +#379 = AXIS2_PLACEMENT_3D('',#380,#381,#382); +#380 = CARTESIAN_POINT('',(85.19165,-61.3231,1.595)); +#381 = DIRECTION('',(0.,0.,1.)); +#382 = DIRECTION('',(1.,0.,0.)); +#383 = AXIS2_PLACEMENT_3D('',#384,#385,#386); +#384 = CARTESIAN_POINT('',(183.19165,-63.3231,1.595)); +#385 = DIRECTION('',(0.,0.,1.)); +#386 = DIRECTION('',(1.,0.,0.)); +#387 = AXIS2_PLACEMENT_3D('',#388,#389,#390); +#388 = CARTESIAN_POINT('',(112.41665,-97.3231,1.595)); +#389 = DIRECTION('',(0.,0.,1.)); +#390 = DIRECTION('',(1.,0.,0.)); +#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394); +#392 = CARTESIAN_POINT('',(177.09165,-45.3231,1.595)); +#393 = DIRECTION('',(0.,0.,1.)); +#394 = DIRECTION('',(1.,0.,0.)); +#395 = AXIS2_PLACEMENT_3D('',#396,#397,#398); +#396 = CARTESIAN_POINT('',(100.19165,-98.3231,1.595)); +#397 = DIRECTION('',(0.,0.,1.)); +#398 = DIRECTION('',(1.,0.,0.)); +#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402); +#400 = CARTESIAN_POINT('',(102.91665,-112.3231,1.595)); +#401 = DIRECTION('',(0.,0.,1.)); +#402 = DIRECTION('',(1.,0.,0.)); +#403 = AXIS2_PLACEMENT_3D('',#404,#405,#406); +#404 = CARTESIAN_POINT('',(154.69165,-48.5231,1.595)); +#405 = DIRECTION('',(0.,-0.,1.)); +#406 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#407 = AXIS2_PLACEMENT_3D('',#408,#409,#410); +#408 = CARTESIAN_POINT('',(95.19165,-83.3231,1.595)); +#409 = DIRECTION('',(0.,0.,1.)); +#410 = DIRECTION('',(1.,0.,0.)); +#411 = AXIS2_PLACEMENT_3D('',#412,#413,#414); +#412 = CARTESIAN_POINT('',(126.16665,-104.3231,1.595)); +#413 = DIRECTION('',(0.,0.,1.)); +#414 = DIRECTION('',(1.,0.,0.)); +#415 = AXIS2_PLACEMENT_3D('',#416,#417,#418); +#416 = CARTESIAN_POINT('',(161.13595,-55.5552,1.595)); +#417 = DIRECTION('',(0.,-0.,1.)); +#418 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422); +#420 = CARTESIAN_POINT('',(210.19165,-95.3231,1.595)); +#421 = DIRECTION('',(0.,-0.,1.)); +#422 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#423 = AXIS2_PLACEMENT_3D('',#424,#425,#426); +#424 = CARTESIAN_POINT('',(101.36665,-69.3231,1.595)); +#425 = DIRECTION('',(0.,0.,1.)); +#426 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#427 = AXIS2_PLACEMENT_3D('',#428,#429,#430); +#428 = CARTESIAN_POINT('',(194.25415,-48.3231,1.595)); +#429 = DIRECTION('',(0.,0.,1.)); +#430 = DIRECTION('',(1.,0.,0.)); +#431 = AXIS2_PLACEMENT_3D('',#432,#433,#434); +#432 = CARTESIAN_POINT('',(174.19165,-59.3231,1.595)); +#433 = DIRECTION('',(0.,0.,1.)); +#434 = DIRECTION('',(1.,0.,0.)); +#435 = AXIS2_PLACEMENT_3D('',#436,#437,#438); +#436 = CARTESIAN_POINT('',(92.19165,-116.3231,1.595)); +#437 = DIRECTION('',(0.,0.,1.)); +#438 = DIRECTION('',(1.,0.,0.)); +#439 = AXIS2_PLACEMENT_3D('',#440,#441,#442); +#440 = CARTESIAN_POINT('',(106.91665,-112.3231,1.595)); +#441 = DIRECTION('',(0.,0.,1.)); +#442 = DIRECTION('',(1.,0.,0.)); +#443 = AXIS2_PLACEMENT_3D('',#444,#445,#446); +#444 = CARTESIAN_POINT('',(118.91665,-112.3231,1.595)); +#445 = DIRECTION('',(0.,0.,1.)); +#446 = DIRECTION('',(1.,0.,0.)); +#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450); +#448 = CARTESIAN_POINT('',(134.86665,-95.3231,1.595)); +#449 = DIRECTION('',(0.,0.,1.)); +#450 = DIRECTION('',(1.,0.,0.)); +#451 = AXIS2_PLACEMENT_3D('',#452,#453,#454); +#452 = CARTESIAN_POINT('',(134.86665,-99.8231,1.595)); +#453 = DIRECTION('',(0.,0.,1.)); +#454 = DIRECTION('',(1.,0.,0.)); +#455 = AXIS2_PLACEMENT_3D('',#456,#457,#458); +#456 = CARTESIAN_POINT('',(112.36665,-102.3231,1.595)); +#457 = DIRECTION('',(0.,0.,1.)); +#458 = DIRECTION('',(1.,0.,0.)); +#459 = AXIS2_PLACEMENT_3D('',#460,#461,#462); +#460 = CARTESIAN_POINT('',(188.49165,-103.8231,1.595)); +#461 = DIRECTION('',(0.,0.,1.)); +#462 = DIRECTION('',(1.,0.,0.)); +#463 = AXIS2_PLACEMENT_3D('',#464,#465,#466); +#464 = CARTESIAN_POINT('',(136.91665,-112.3231,1.595)); +#465 = DIRECTION('',(0.,0.,1.)); +#466 = DIRECTION('',(1.,0.,0.)); +#467 = AXIS2_PLACEMENT_3D('',#468,#469,#470); +#468 = CARTESIAN_POINT('',(179.74165,-51.2231,1.595)); +#469 = DIRECTION('',(0.,0.,1.)); +#470 = DIRECTION('',(1.,0.,0.)); +#471 = AXIS2_PLACEMENT_3D('',#472,#473,#474); +#472 = CARTESIAN_POINT('',(199.69165,-61.8231,1.595)); +#473 = DIRECTION('',(0.,0.,1.)); +#474 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478); +#476 = CARTESIAN_POINT('',(203.1,-92.1,1.595)); +#477 = DIRECTION('',(0.,0.,1.)); +#478 = DIRECTION('',(1.,0.,0.)); +#479 = AXIS2_PLACEMENT_3D('',#480,#481,#482); +#480 = CARTESIAN_POINT('',(115.25165,-129.5831,-8.5E-02)); +#481 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#482 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#483 = AXIS2_PLACEMENT_3D('',#484,#485,#486); +#484 = CARTESIAN_POINT('',(138.11165,-129.5831,-8.5E-02)); +#485 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#486 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#487 = AXIS2_PLACEMENT_3D('',#488,#489,#490); +#488 = CARTESIAN_POINT('',(133.03165,-81.3231,-8.500000000001E-02)); +#489 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#490 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#491 = AXIS2_PLACEMENT_3D('',#492,#493,#494); +#492 = CARTESIAN_POINT('',(106.11165,-81.3231,-8.500000000001E-02)); +#493 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#494 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#495 = AXIS2_PLACEMENT_3D('',#496,#497,#498); +#496 = CARTESIAN_POINT('',(0.,0.,0.)); +#497 = DIRECTION('',(0.,0.,1.)); +#498 = DIRECTION('',(1.,0.,-0.)); +#499 = AXIS2_PLACEMENT_3D('',#500,#501,#502); +#500 = CARTESIAN_POINT('',(0.,0.,0.)); +#501 = DIRECTION('',(0.,0.,1.)); +#502 = DIRECTION('',(1.,0.,-0.)); +#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506); +#504 = CARTESIAN_POINT('',(0.,0.,0.)); +#505 = DIRECTION('',(0.,0.,1.)); +#506 = DIRECTION('',(1.,0.,-0.)); +#507 = AXIS2_PLACEMENT_3D('',#508,#509,#510); +#508 = CARTESIAN_POINT('',(0.,0.,0.)); +#509 = DIRECTION('',(0.,0.,1.)); +#510 = DIRECTION('',(1.,0.,-0.)); +#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514); +#512 = CARTESIAN_POINT('',(0.,0.,0.)); +#513 = DIRECTION('',(0.,0.,1.)); +#514 = DIRECTION('',(1.,0.,-0.)); +#515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#519)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#516,#517,#518)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#516 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#517 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#518 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#519 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-06),#516, + 'distance_accuracy_value','confusion accuracy'); +#520 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#521 = SHAPE_DEFINITION_REPRESENTATION(#522,#528); +#522 = PRODUCT_DEFINITION_SHAPE('','',#523); +#523 = PRODUCT_DEFINITION('design','',#524,#527); +#524 = PRODUCT_DEFINITION_FORMATION('','',#525); +#525 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#526)); +#526 = PRODUCT_CONTEXT('',#2,'mechanical'); +#527 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#528 = SHAPE_REPRESENTATION('',(#11,#529),#533); +#529 = AXIS2_PLACEMENT_3D('',#530,#531,#532); +#530 = CARTESIAN_POINT('',(0.,0.,0.)); +#531 = DIRECTION('',(0.,0.,1.)); +#532 = DIRECTION('',(1.,0.,-0.)); +#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#537)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#534,#535,#536)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#534 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#535 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#536 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#537 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#534, + 'distance_accuracy_value','confusion accuracy'); +#538 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#539,#541); +#539 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#540) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#540 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); +#541 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#542 + ); +#542 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','R2','',#5,#523,$); +#543 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#525)); +#544 = SHAPE_DEFINITION_REPRESENTATION(#545,#551); +#545 = PRODUCT_DEFINITION_SHAPE('','',#546); +#546 = PRODUCT_DEFINITION('design','',#547,#550); +#547 = PRODUCT_DEFINITION_FORMATION('','',#548); +#548 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#549)); +#549 = PRODUCT_CONTEXT('',#2,'mechanical'); +#550 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#551 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#552),#1342); +#552 = MANIFOLD_SOLID_BREP('',#553); +#553 = CLOSED_SHELL('',(#554,#594,#677,#702,#727,#794,#811,#828,#877, + #894,#911,#960,#977,#1046,#1077,#1101,#1170,#1194,#1211,#1228,#1245, + #1262,#1279,#1296,#1313,#1330)); +#554 = ADVANCED_FACE('',(#555),#589,.F.); +#555 = FACE_BOUND('',#556,.F.); +#556 = EDGE_LOOP('',(#557,#567,#575,#583)); +#557 = ORIENTED_EDGE('',*,*,#558,.F.); +#558 = EDGE_CURVE('',#559,#561,#563,.T.); +#559 = VERTEX_POINT('',#560); +#560 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#561 = VERTEX_POINT('',#562); +#562 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#563 = LINE('',#564,#565); +#564 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#565 = VECTOR('',#566,1.); +#566 = DIRECTION('',(0.,0.,1.)); +#567 = ORIENTED_EDGE('',*,*,#568,.T.); +#568 = EDGE_CURVE('',#559,#569,#571,.T.); +#569 = VERTEX_POINT('',#570); +#570 = CARTESIAN_POINT('',(-0.8,0.4,4.5E-02)); +#571 = LINE('',#572,#573); +#572 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#573 = VECTOR('',#574,1.); +#574 = DIRECTION('',(0.,1.,0.)); +#575 = ORIENTED_EDGE('',*,*,#576,.T.); +#576 = EDGE_CURVE('',#569,#577,#579,.T.); +#577 = VERTEX_POINT('',#578); +#578 = CARTESIAN_POINT('',(-0.8,0.4,0.405)); +#579 = LINE('',#580,#581); +#580 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#581 = VECTOR('',#582,1.); +#582 = DIRECTION('',(0.,0.,1.)); +#583 = ORIENTED_EDGE('',*,*,#584,.F.); +#584 = EDGE_CURVE('',#561,#577,#585,.T.); +#585 = LINE('',#586,#587); +#586 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#587 = VECTOR('',#588,1.); +#588 = DIRECTION('',(0.,1.,0.)); +#589 = PLANE('',#590); +#590 = AXIS2_PLACEMENT_3D('',#591,#592,#593); +#591 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#592 = DIRECTION('',(1.,0.,0.)); +#593 = DIRECTION('',(0.,0.,1.)); +#594 = ADVANCED_FACE('',(#595),#672,.F.); +#595 = FACE_BOUND('',#596,.F.); +#596 = EDGE_LOOP('',(#597,#607,#614,#615,#624,#632,#641,#649,#657,#665) + ); +#597 = ORIENTED_EDGE('',*,*,#598,.F.); +#598 = EDGE_CURVE('',#599,#601,#603,.T.); +#599 = VERTEX_POINT('',#600); +#600 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#601 = VERTEX_POINT('',#602); +#602 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#603 = LINE('',#604,#605); +#604 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#605 = VECTOR('',#606,1.); +#606 = DIRECTION('',(1.,0.,0.)); +#607 = ORIENTED_EDGE('',*,*,#608,.F.); +#608 = EDGE_CURVE('',#559,#599,#609,.T.); +#609 = CIRCLE('',#610,4.5E-02); +#610 = AXIS2_PLACEMENT_3D('',#611,#612,#613); +#611 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#612 = DIRECTION('',(0.,-1.,0.)); +#613 = DIRECTION('',(0.,0.,1.)); +#614 = ORIENTED_EDGE('',*,*,#558,.T.); +#615 = ORIENTED_EDGE('',*,*,#616,.T.); +#616 = EDGE_CURVE('',#561,#617,#619,.T.); +#617 = VERTEX_POINT('',#618); +#618 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#619 = CIRCLE('',#620,4.5E-02); +#620 = AXIS2_PLACEMENT_3D('',#621,#622,#623); +#621 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#622 = DIRECTION('',(0.,1.,0.)); +#623 = DIRECTION('',(0.,-0.,1.)); +#624 = ORIENTED_EDGE('',*,*,#625,.T.); +#625 = EDGE_CURVE('',#617,#626,#628,.T.); +#626 = VERTEX_POINT('',#627); +#627 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#628 = LINE('',#629,#630); +#629 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#630 = VECTOR('',#631,1.); +#631 = DIRECTION('',(1.,0.,0.)); +#632 = ORIENTED_EDGE('',*,*,#633,.F.); +#633 = EDGE_CURVE('',#634,#626,#636,.T.); +#634 = VERTEX_POINT('',#635); +#635 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#636 = CIRCLE('',#637,4.5E-02); +#637 = AXIS2_PLACEMENT_3D('',#638,#639,#640); +#638 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#639 = DIRECTION('',(0.,-1.,0.)); +#640 = DIRECTION('',(0.,0.,1.)); +#641 = ORIENTED_EDGE('',*,*,#642,.F.); +#642 = EDGE_CURVE('',#643,#634,#645,.T.); +#643 = VERTEX_POINT('',#644); +#644 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#645 = LINE('',#646,#647); +#646 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#647 = VECTOR('',#648,1.); +#648 = DIRECTION('',(1.,0.,0.)); +#649 = ORIENTED_EDGE('',*,*,#650,.F.); +#650 = EDGE_CURVE('',#651,#643,#653,.T.); +#651 = VERTEX_POINT('',#652); +#652 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#653 = LINE('',#654,#655); +#654 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#655 = VECTOR('',#656,1.); +#656 = DIRECTION('',(0.,0.,1.)); +#657 = ORIENTED_EDGE('',*,*,#658,.T.); +#658 = EDGE_CURVE('',#651,#659,#661,.T.); +#659 = VERTEX_POINT('',#660); +#660 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#661 = LINE('',#662,#663); +#662 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#663 = VECTOR('',#664,1.); +#664 = DIRECTION('',(1.,0.,0.)); +#665 = ORIENTED_EDGE('',*,*,#666,.T.); +#666 = EDGE_CURVE('',#659,#601,#667,.T.); +#667 = CIRCLE('',#668,4.5E-02); +#668 = AXIS2_PLACEMENT_3D('',#669,#670,#671); +#669 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#670 = DIRECTION('',(0.,1.,0.)); +#671 = DIRECTION('',(0.,-0.,1.)); +#672 = PLANE('',#673); +#673 = AXIS2_PLACEMENT_3D('',#674,#675,#676); +#674 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#675 = DIRECTION('',(0.,1.,0.)); +#676 = DIRECTION('',(0.,-0.,1.)); +#677 = ADVANCED_FACE('',(#678),#697,.T.); +#678 = FACE_BOUND('',#679,.T.); +#679 = EDGE_LOOP('',(#680,#681,#690,#696)); +#680 = ORIENTED_EDGE('',*,*,#568,.T.); +#681 = ORIENTED_EDGE('',*,*,#682,.T.); +#682 = EDGE_CURVE('',#569,#683,#685,.T.); +#683 = VERTEX_POINT('',#684); +#684 = CARTESIAN_POINT('',(-0.755,0.4,-2.775557561563E-17)); +#685 = CIRCLE('',#686,4.5E-02); +#686 = AXIS2_PLACEMENT_3D('',#687,#688,#689); +#687 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#688 = DIRECTION('',(0.,-1.,0.)); +#689 = DIRECTION('',(0.,0.,1.)); +#690 = ORIENTED_EDGE('',*,*,#691,.F.); +#691 = EDGE_CURVE('',#599,#683,#692,.T.); +#692 = LINE('',#693,#694); +#693 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#694 = VECTOR('',#695,1.); +#695 = DIRECTION('',(0.,1.,0.)); +#696 = ORIENTED_EDGE('',*,*,#608,.F.); +#697 = CYLINDRICAL_SURFACE('',#698,4.5E-02); +#698 = AXIS2_PLACEMENT_3D('',#699,#700,#701); +#699 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#700 = DIRECTION('',(0.,1.,0.)); +#701 = DIRECTION('',(-1.,0.,0.)); +#702 = ADVANCED_FACE('',(#703),#722,.T.); +#703 = FACE_BOUND('',#704,.T.); +#704 = EDGE_LOOP('',(#705,#706,#714,#721)); +#705 = ORIENTED_EDGE('',*,*,#616,.T.); +#706 = ORIENTED_EDGE('',*,*,#707,.T.); +#707 = EDGE_CURVE('',#617,#708,#710,.T.); +#708 = VERTEX_POINT('',#709); +#709 = CARTESIAN_POINT('',(-0.755,0.4,0.45)); +#710 = LINE('',#711,#712); +#711 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#712 = VECTOR('',#713,1.); +#713 = DIRECTION('',(0.,1.,0.)); +#714 = ORIENTED_EDGE('',*,*,#715,.F.); +#715 = EDGE_CURVE('',#577,#708,#716,.T.); +#716 = CIRCLE('',#717,4.5E-02); +#717 = AXIS2_PLACEMENT_3D('',#718,#719,#720); +#718 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#719 = DIRECTION('',(0.,1.,0.)); +#720 = DIRECTION('',(0.,-0.,1.)); +#721 = ORIENTED_EDGE('',*,*,#584,.F.); +#722 = CYLINDRICAL_SURFACE('',#723,4.5E-02); +#723 = AXIS2_PLACEMENT_3D('',#724,#725,#726); +#724 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#725 = DIRECTION('',(0.,1.,0.)); +#726 = DIRECTION('',(-1.,0.,0.)); +#727 = ADVANCED_FACE('',(#728),#789,.T.); +#728 = FACE_BOUND('',#729,.T.); +#729 = EDGE_LOOP('',(#730,#738,#739,#740,#741,#749,#758,#766,#774,#782) + ); +#730 = ORIENTED_EDGE('',*,*,#731,.F.); +#731 = EDGE_CURVE('',#683,#732,#734,.T.); +#732 = VERTEX_POINT('',#733); +#733 = CARTESIAN_POINT('',(-0.545,0.4,-2.775557561563E-17)); +#734 = LINE('',#735,#736); +#735 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#736 = VECTOR('',#737,1.); +#737 = DIRECTION('',(1.,0.,0.)); +#738 = ORIENTED_EDGE('',*,*,#682,.F.); +#739 = ORIENTED_EDGE('',*,*,#576,.T.); +#740 = ORIENTED_EDGE('',*,*,#715,.T.); +#741 = ORIENTED_EDGE('',*,*,#742,.T.); +#742 = EDGE_CURVE('',#708,#743,#745,.T.); +#743 = VERTEX_POINT('',#744); +#744 = CARTESIAN_POINT('',(-0.545,0.4,0.45)); +#745 = LINE('',#746,#747); +#746 = CARTESIAN_POINT('',(-0.8,0.4,0.45)); +#747 = VECTOR('',#748,1.); +#748 = DIRECTION('',(1.,0.,0.)); +#749 = ORIENTED_EDGE('',*,*,#750,.F.); +#750 = EDGE_CURVE('',#751,#743,#753,.T.); +#751 = VERTEX_POINT('',#752); +#752 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#753 = CIRCLE('',#754,4.5E-02); +#754 = AXIS2_PLACEMENT_3D('',#755,#756,#757); +#755 = CARTESIAN_POINT('',(-0.545,0.4,0.405)); +#756 = DIRECTION('',(0.,-1.,0.)); +#757 = DIRECTION('',(0.,0.,1.)); +#758 = ORIENTED_EDGE('',*,*,#759,.F.); +#759 = EDGE_CURVE('',#760,#751,#762,.T.); +#760 = VERTEX_POINT('',#761); +#761 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#762 = LINE('',#763,#764); +#763 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#764 = VECTOR('',#765,1.); +#765 = DIRECTION('',(1.,0.,0.)); +#766 = ORIENTED_EDGE('',*,*,#767,.F.); +#767 = EDGE_CURVE('',#768,#760,#770,.T.); +#768 = VERTEX_POINT('',#769); +#769 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#770 = LINE('',#771,#772); +#771 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#772 = VECTOR('',#773,1.); +#773 = DIRECTION('',(0.,0.,1.)); +#774 = ORIENTED_EDGE('',*,*,#775,.T.); +#775 = EDGE_CURVE('',#768,#776,#778,.T.); +#776 = VERTEX_POINT('',#777); +#777 = CARTESIAN_POINT('',(-0.5,0.4,4.5E-02)); +#778 = LINE('',#779,#780); +#779 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#780 = VECTOR('',#781,1.); +#781 = DIRECTION('',(1.,0.,0.)); +#782 = ORIENTED_EDGE('',*,*,#783,.T.); +#783 = EDGE_CURVE('',#776,#732,#784,.T.); +#784 = CIRCLE('',#785,4.5E-02); +#785 = AXIS2_PLACEMENT_3D('',#786,#787,#788); +#786 = CARTESIAN_POINT('',(-0.545,0.4,4.5E-02)); +#787 = DIRECTION('',(0.,1.,0.)); +#788 = DIRECTION('',(0.,-0.,1.)); +#789 = PLANE('',#790); +#790 = AXIS2_PLACEMENT_3D('',#791,#792,#793); +#791 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#792 = DIRECTION('',(0.,1.,0.)); +#793 = DIRECTION('',(0.,-0.,1.)); +#794 = ADVANCED_FACE('',(#795),#806,.F.); +#795 = FACE_BOUND('',#796,.F.); +#796 = EDGE_LOOP('',(#797,#798,#799,#800)); +#797 = ORIENTED_EDGE('',*,*,#731,.F.); +#798 = ORIENTED_EDGE('',*,*,#691,.F.); +#799 = ORIENTED_EDGE('',*,*,#598,.T.); +#800 = ORIENTED_EDGE('',*,*,#801,.T.); +#801 = EDGE_CURVE('',#601,#732,#802,.T.); +#802 = LINE('',#803,#804); +#803 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#804 = VECTOR('',#805,1.); +#805 = DIRECTION('',(0.,1.,0.)); +#806 = PLANE('',#807); +#807 = AXIS2_PLACEMENT_3D('',#808,#809,#810); +#808 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#809 = DIRECTION('',(0.,0.,1.)); +#810 = DIRECTION('',(1.,0.,-0.)); +#811 = ADVANCED_FACE('',(#812),#823,.T.); +#812 = FACE_BOUND('',#813,.T.); +#813 = EDGE_LOOP('',(#814,#815,#816,#817)); +#814 = ORIENTED_EDGE('',*,*,#666,.T.); +#815 = ORIENTED_EDGE('',*,*,#801,.T.); +#816 = ORIENTED_EDGE('',*,*,#783,.F.); +#817 = ORIENTED_EDGE('',*,*,#818,.F.); +#818 = EDGE_CURVE('',#659,#776,#819,.T.); +#819 = LINE('',#820,#821); +#820 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#821 = VECTOR('',#822,1.); +#822 = DIRECTION('',(0.,1.,0.)); +#823 = CYLINDRICAL_SURFACE('',#824,4.5E-02); +#824 = AXIS2_PLACEMENT_3D('',#825,#826,#827); +#825 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#826 = DIRECTION('',(0.,1.,0.)); +#827 = DIRECTION('',(1.,0.,0.)); +#828 = ADVANCED_FACE('',(#829),#872,.F.); +#829 = FACE_BOUND('',#830,.F.); +#830 = EDGE_LOOP('',(#831,#832,#833,#834,#842,#850,#858,#866)); +#831 = ORIENTED_EDGE('',*,*,#658,.F.); +#832 = ORIENTED_EDGE('',*,*,#650,.T.); +#833 = ORIENTED_EDGE('',*,*,#642,.T.); +#834 = ORIENTED_EDGE('',*,*,#835,.T.); +#835 = EDGE_CURVE('',#634,#836,#838,.T.); +#836 = VERTEX_POINT('',#837); +#837 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#838 = LINE('',#839,#840); +#839 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#840 = VECTOR('',#841,1.); +#841 = DIRECTION('',(1.,0.,0.)); +#842 = ORIENTED_EDGE('',*,*,#843,.T.); +#843 = EDGE_CURVE('',#836,#844,#846,.T.); +#844 = VERTEX_POINT('',#845); +#845 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#846 = LINE('',#847,#848); +#847 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#848 = VECTOR('',#849,1.); +#849 = DIRECTION('',(1.,0.,0.)); +#850 = ORIENTED_EDGE('',*,*,#851,.F.); +#851 = EDGE_CURVE('',#852,#844,#854,.T.); +#852 = VERTEX_POINT('',#853); +#853 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#854 = LINE('',#855,#856); +#855 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#856 = VECTOR('',#857,1.); +#857 = DIRECTION('',(0.,0.,1.)); +#858 = ORIENTED_EDGE('',*,*,#859,.F.); +#859 = EDGE_CURVE('',#860,#852,#862,.T.); +#860 = VERTEX_POINT('',#861); +#861 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#862 = LINE('',#863,#864); +#863 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#864 = VECTOR('',#865,1.); +#865 = DIRECTION('',(1.,0.,0.)); +#866 = ORIENTED_EDGE('',*,*,#867,.F.); +#867 = EDGE_CURVE('',#659,#860,#868,.T.); +#868 = LINE('',#869,#870); +#869 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#870 = VECTOR('',#871,1.); +#871 = DIRECTION('',(1.,0.,0.)); +#872 = PLANE('',#873); +#873 = AXIS2_PLACEMENT_3D('',#874,#875,#876); +#874 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#875 = DIRECTION('',(0.,1.,0.)); +#876 = DIRECTION('',(0.,-0.,1.)); +#877 = ADVANCED_FACE('',(#878),#889,.T.); +#878 = FACE_BOUND('',#879,.T.); +#879 = EDGE_LOOP('',(#880,#881,#882,#883)); +#880 = ORIENTED_EDGE('',*,*,#742,.F.); +#881 = ORIENTED_EDGE('',*,*,#707,.F.); +#882 = ORIENTED_EDGE('',*,*,#625,.T.); +#883 = ORIENTED_EDGE('',*,*,#884,.T.); +#884 = EDGE_CURVE('',#626,#743,#885,.T.); +#885 = LINE('',#886,#887); +#886 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#887 = VECTOR('',#888,1.); +#888 = DIRECTION('',(0.,1.,0.)); +#889 = PLANE('',#890); +#890 = AXIS2_PLACEMENT_3D('',#891,#892,#893); +#891 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#892 = DIRECTION('',(0.,0.,1.)); +#893 = DIRECTION('',(1.,0.,-0.)); +#894 = ADVANCED_FACE('',(#895),#906,.T.); +#895 = FACE_BOUND('',#896,.T.); +#896 = EDGE_LOOP('',(#897,#903,#904,#905)); +#897 = ORIENTED_EDGE('',*,*,#898,.T.); +#898 = EDGE_CURVE('',#634,#751,#899,.T.); +#899 = LINE('',#900,#901); +#900 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#901 = VECTOR('',#902,1.); +#902 = DIRECTION('',(0.,1.,0.)); +#903 = ORIENTED_EDGE('',*,*,#750,.T.); +#904 = ORIENTED_EDGE('',*,*,#884,.F.); +#905 = ORIENTED_EDGE('',*,*,#633,.F.); +#906 = CYLINDRICAL_SURFACE('',#907,4.5E-02); +#907 = AXIS2_PLACEMENT_3D('',#908,#909,#910); +#908 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#909 = DIRECTION('',(0.,1.,0.)); +#910 = DIRECTION('',(1.,0.,0.)); +#911 = ADVANCED_FACE('',(#912),#955,.T.); +#912 = FACE_BOUND('',#913,.T.); +#913 = EDGE_LOOP('',(#914,#915,#916,#917,#925,#933,#941,#949)); +#914 = ORIENTED_EDGE('',*,*,#775,.F.); +#915 = ORIENTED_EDGE('',*,*,#767,.T.); +#916 = ORIENTED_EDGE('',*,*,#759,.T.); +#917 = ORIENTED_EDGE('',*,*,#918,.T.); +#918 = EDGE_CURVE('',#751,#919,#921,.T.); +#919 = VERTEX_POINT('',#920); +#920 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#921 = LINE('',#922,#923); +#922 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#923 = VECTOR('',#924,1.); +#924 = DIRECTION('',(1.,0.,0.)); +#925 = ORIENTED_EDGE('',*,*,#926,.T.); +#926 = EDGE_CURVE('',#919,#927,#929,.T.); +#927 = VERTEX_POINT('',#928); +#928 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#929 = LINE('',#930,#931); +#930 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#931 = VECTOR('',#932,1.); +#932 = DIRECTION('',(1.,0.,0.)); +#933 = ORIENTED_EDGE('',*,*,#934,.F.); +#934 = EDGE_CURVE('',#935,#927,#937,.T.); +#935 = VERTEX_POINT('',#936); +#936 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#937 = LINE('',#938,#939); +#938 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#939 = VECTOR('',#940,1.); +#940 = DIRECTION('',(0.,0.,1.)); +#941 = ORIENTED_EDGE('',*,*,#942,.F.); +#942 = EDGE_CURVE('',#943,#935,#945,.T.); +#943 = VERTEX_POINT('',#944); +#944 = CARTESIAN_POINT('',(0.5,0.4,4.5E-02)); +#945 = LINE('',#946,#947); +#946 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#947 = VECTOR('',#948,1.); +#948 = DIRECTION('',(1.,0.,0.)); +#949 = ORIENTED_EDGE('',*,*,#950,.F.); +#950 = EDGE_CURVE('',#776,#943,#951,.T.); +#951 = LINE('',#952,#953); +#952 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#953 = VECTOR('',#954,1.); +#954 = DIRECTION('',(1.,0.,0.)); +#955 = PLANE('',#956); +#956 = AXIS2_PLACEMENT_3D('',#957,#958,#959); +#957 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#958 = DIRECTION('',(0.,1.,0.)); +#959 = DIRECTION('',(0.,-0.,1.)); +#960 = ADVANCED_FACE('',(#961),#972,.F.); +#961 = FACE_BOUND('',#962,.F.); +#962 = EDGE_LOOP('',(#963,#964,#965,#971)); +#963 = ORIENTED_EDGE('',*,*,#818,.F.); +#964 = ORIENTED_EDGE('',*,*,#867,.T.); +#965 = ORIENTED_EDGE('',*,*,#966,.T.); +#966 = EDGE_CURVE('',#860,#943,#967,.T.); +#967 = LINE('',#968,#969); +#968 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#969 = VECTOR('',#970,1.); +#970 = DIRECTION('',(0.,1.,0.)); +#971 = ORIENTED_EDGE('',*,*,#950,.F.); +#972 = PLANE('',#973); +#973 = AXIS2_PLACEMENT_3D('',#974,#975,#976); +#974 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#975 = DIRECTION('',(0.,0.,1.)); +#976 = DIRECTION('',(1.,0.,-0.)); +#977 = ADVANCED_FACE('',(#978),#1041,.F.); +#978 = FACE_BOUND('',#979,.F.); +#979 = EDGE_LOOP('',(#980,#990,#997,#998,#999,#1000,#1009,#1017,#1026, + #1034)); +#980 = ORIENTED_EDGE('',*,*,#981,.F.); +#981 = EDGE_CURVE('',#982,#984,#986,.T.); +#982 = VERTEX_POINT('',#983); +#983 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#984 = VERTEX_POINT('',#985); +#985 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#986 = LINE('',#987,#988); +#987 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#988 = VECTOR('',#989,1.); +#989 = DIRECTION('',(1.,0.,0.)); +#990 = ORIENTED_EDGE('',*,*,#991,.F.); +#991 = EDGE_CURVE('',#860,#982,#992,.T.); +#992 = CIRCLE('',#993,4.5E-02); +#993 = AXIS2_PLACEMENT_3D('',#994,#995,#996); +#994 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#995 = DIRECTION('',(0.,-1.,0.)); +#996 = DIRECTION('',(0.,0.,1.)); +#997 = ORIENTED_EDGE('',*,*,#859,.T.); +#998 = ORIENTED_EDGE('',*,*,#851,.T.); +#999 = ORIENTED_EDGE('',*,*,#843,.F.); +#1000 = ORIENTED_EDGE('',*,*,#1001,.T.); +#1001 = EDGE_CURVE('',#836,#1002,#1004,.T.); +#1002 = VERTEX_POINT('',#1003); +#1003 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#1004 = CIRCLE('',#1005,4.5E-02); +#1005 = AXIS2_PLACEMENT_3D('',#1006,#1007,#1008); +#1006 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#1007 = DIRECTION('',(0.,1.,0.)); +#1008 = DIRECTION('',(0.,-0.,1.)); +#1009 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1010 = EDGE_CURVE('',#1002,#1011,#1013,.T.); +#1011 = VERTEX_POINT('',#1012); +#1012 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#1013 = LINE('',#1014,#1015); +#1014 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1015 = VECTOR('',#1016,1.); +#1016 = DIRECTION('',(1.,0.,0.)); +#1017 = ORIENTED_EDGE('',*,*,#1018,.F.); +#1018 = EDGE_CURVE('',#1019,#1011,#1021,.T.); +#1019 = VERTEX_POINT('',#1020); +#1020 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#1021 = CIRCLE('',#1022,4.5E-02); +#1022 = AXIS2_PLACEMENT_3D('',#1023,#1024,#1025); +#1023 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#1024 = DIRECTION('',(0.,-1.,0.)); +#1025 = DIRECTION('',(0.,0.,1.)); +#1026 = ORIENTED_EDGE('',*,*,#1027,.F.); +#1027 = EDGE_CURVE('',#1028,#1019,#1030,.T.); +#1028 = VERTEX_POINT('',#1029); +#1029 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#1030 = LINE('',#1031,#1032); +#1031 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#1032 = VECTOR('',#1033,1.); +#1033 = DIRECTION('',(0.,0.,1.)); +#1034 = ORIENTED_EDGE('',*,*,#1035,.T.); +#1035 = EDGE_CURVE('',#1028,#984,#1036,.T.); +#1036 = CIRCLE('',#1037,4.5E-02); +#1037 = AXIS2_PLACEMENT_3D('',#1038,#1039,#1040); +#1038 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#1039 = DIRECTION('',(0.,1.,0.)); +#1040 = DIRECTION('',(0.,-0.,1.)); +#1041 = PLANE('',#1042); +#1042 = AXIS2_PLACEMENT_3D('',#1043,#1044,#1045); +#1043 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#1044 = DIRECTION('',(0.,1.,0.)); +#1045 = DIRECTION('',(0.,-0.,1.)); +#1046 = ADVANCED_FACE('',(#1047),#1072,.F.); +#1047 = FACE_BOUND('',#1048,.F.); +#1048 = EDGE_LOOP('',(#1049,#1050,#1058,#1066)); +#1049 = ORIENTED_EDGE('',*,*,#835,.F.); +#1050 = ORIENTED_EDGE('',*,*,#1051,.T.); +#1051 = EDGE_CURVE('',#634,#1052,#1054,.T.); +#1052 = VERTEX_POINT('',#1053); +#1053 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1054 = LINE('',#1055,#1056); +#1055 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#1056 = VECTOR('',#1057,1.); +#1057 = DIRECTION('',(0.,0.,1.)); +#1058 = ORIENTED_EDGE('',*,*,#1059,.T.); +#1059 = EDGE_CURVE('',#1052,#1060,#1062,.T.); +#1060 = VERTEX_POINT('',#1061); +#1061 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1062 = LINE('',#1063,#1064); +#1063 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1064 = VECTOR('',#1065,1.); +#1065 = DIRECTION('',(1.,0.,0.)); +#1066 = ORIENTED_EDGE('',*,*,#1067,.F.); +#1067 = EDGE_CURVE('',#836,#1060,#1068,.T.); +#1068 = LINE('',#1069,#1070); +#1069 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#1070 = VECTOR('',#1071,1.); +#1071 = DIRECTION('',(0.,0.,1.)); +#1072 = PLANE('',#1073); +#1073 = AXIS2_PLACEMENT_3D('',#1074,#1075,#1076); +#1074 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#1075 = DIRECTION('',(0.,1.,0.)); +#1076 = DIRECTION('',(0.,-0.,1.)); +#1077 = ADVANCED_FACE('',(#1078),#1096,.F.); +#1078 = FACE_BOUND('',#1079,.F.); +#1079 = EDGE_LOOP('',(#1080,#1081,#1082,#1090)); +#1080 = ORIENTED_EDGE('',*,*,#1051,.F.); +#1081 = ORIENTED_EDGE('',*,*,#898,.T.); +#1082 = ORIENTED_EDGE('',*,*,#1083,.T.); +#1083 = EDGE_CURVE('',#751,#1084,#1086,.T.); +#1084 = VERTEX_POINT('',#1085); +#1085 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#1086 = LINE('',#1087,#1088); +#1087 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#1088 = VECTOR('',#1089,1.); +#1089 = DIRECTION('',(0.,0.,1.)); +#1090 = ORIENTED_EDGE('',*,*,#1091,.F.); +#1091 = EDGE_CURVE('',#1052,#1084,#1092,.T.); +#1092 = LINE('',#1093,#1094); +#1093 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1094 = VECTOR('',#1095,1.); +#1095 = DIRECTION('',(0.,1.,0.)); +#1096 = PLANE('',#1097); +#1097 = AXIS2_PLACEMENT_3D('',#1098,#1099,#1100); +#1098 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#1099 = DIRECTION('',(1.,0.,0.)); +#1100 = DIRECTION('',(0.,0.,1.)); +#1101 = ADVANCED_FACE('',(#1102),#1165,.T.); +#1102 = FACE_BOUND('',#1103,.T.); +#1103 = EDGE_LOOP('',(#1104,#1114,#1121,#1122,#1123,#1124,#1133,#1141, + #1150,#1158)); +#1104 = ORIENTED_EDGE('',*,*,#1105,.F.); +#1105 = EDGE_CURVE('',#1106,#1108,#1110,.T.); +#1106 = VERTEX_POINT('',#1107); +#1107 = CARTESIAN_POINT('',(0.545,0.4,-2.775557561563E-17)); +#1108 = VERTEX_POINT('',#1109); +#1109 = CARTESIAN_POINT('',(0.755,0.4,-2.775557561563E-17)); +#1110 = LINE('',#1111,#1112); +#1111 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#1112 = VECTOR('',#1113,1.); +#1113 = DIRECTION('',(1.,0.,0.)); +#1114 = ORIENTED_EDGE('',*,*,#1115,.F.); +#1115 = EDGE_CURVE('',#943,#1106,#1116,.T.); +#1116 = CIRCLE('',#1117,4.5E-02); +#1117 = AXIS2_PLACEMENT_3D('',#1118,#1119,#1120); +#1118 = CARTESIAN_POINT('',(0.545,0.4,4.5E-02)); +#1119 = DIRECTION('',(0.,-1.,0.)); +#1120 = DIRECTION('',(0.,0.,1.)); +#1121 = ORIENTED_EDGE('',*,*,#942,.T.); +#1122 = ORIENTED_EDGE('',*,*,#934,.T.); +#1123 = ORIENTED_EDGE('',*,*,#926,.F.); +#1124 = ORIENTED_EDGE('',*,*,#1125,.T.); +#1125 = EDGE_CURVE('',#919,#1126,#1128,.T.); +#1126 = VERTEX_POINT('',#1127); +#1127 = CARTESIAN_POINT('',(0.545,0.4,0.45)); +#1128 = CIRCLE('',#1129,4.5E-02); +#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132); +#1130 = CARTESIAN_POINT('',(0.545,0.4,0.405)); +#1131 = DIRECTION('',(0.,1.,0.)); +#1132 = DIRECTION('',(0.,-0.,1.)); +#1133 = ORIENTED_EDGE('',*,*,#1134,.T.); +#1134 = EDGE_CURVE('',#1126,#1135,#1137,.T.); +#1135 = VERTEX_POINT('',#1136); +#1136 = CARTESIAN_POINT('',(0.755,0.4,0.45)); +#1137 = LINE('',#1138,#1139); +#1138 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#1139 = VECTOR('',#1140,1.); +#1140 = DIRECTION('',(1.,0.,0.)); +#1141 = ORIENTED_EDGE('',*,*,#1142,.F.); +#1142 = EDGE_CURVE('',#1143,#1135,#1145,.T.); +#1143 = VERTEX_POINT('',#1144); +#1144 = CARTESIAN_POINT('',(0.8,0.4,0.405)); +#1145 = CIRCLE('',#1146,4.5E-02); +#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149); +#1147 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#1148 = DIRECTION('',(0.,-1.,0.)); +#1149 = DIRECTION('',(0.,0.,1.)); +#1150 = ORIENTED_EDGE('',*,*,#1151,.F.); +#1151 = EDGE_CURVE('',#1152,#1143,#1154,.T.); +#1152 = VERTEX_POINT('',#1153); +#1153 = CARTESIAN_POINT('',(0.8,0.4,4.5E-02)); +#1154 = LINE('',#1155,#1156); +#1155 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#1156 = VECTOR('',#1157,1.); +#1157 = DIRECTION('',(0.,0.,1.)); +#1158 = ORIENTED_EDGE('',*,*,#1159,.T.); +#1159 = EDGE_CURVE('',#1152,#1108,#1160,.T.); +#1160 = CIRCLE('',#1161,4.5E-02); +#1161 = AXIS2_PLACEMENT_3D('',#1162,#1163,#1164); +#1162 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#1163 = DIRECTION('',(0.,1.,0.)); +#1164 = DIRECTION('',(0.,-0.,1.)); +#1165 = PLANE('',#1166); +#1166 = AXIS2_PLACEMENT_3D('',#1167,#1168,#1169); +#1167 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#1168 = DIRECTION('',(0.,1.,0.)); +#1169 = DIRECTION('',(0.,-0.,1.)); +#1170 = ADVANCED_FACE('',(#1171),#1189,.T.); +#1171 = FACE_BOUND('',#1172,.T.); +#1172 = EDGE_LOOP('',(#1173,#1174,#1175,#1183)); +#1173 = ORIENTED_EDGE('',*,*,#918,.F.); +#1174 = ORIENTED_EDGE('',*,*,#1083,.T.); +#1175 = ORIENTED_EDGE('',*,*,#1176,.T.); +#1176 = EDGE_CURVE('',#1084,#1177,#1179,.T.); +#1177 = VERTEX_POINT('',#1178); +#1178 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#1179 = LINE('',#1180,#1181); +#1180 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#1181 = VECTOR('',#1182,1.); +#1182 = DIRECTION('',(1.,0.,0.)); +#1183 = ORIENTED_EDGE('',*,*,#1184,.F.); +#1184 = EDGE_CURVE('',#919,#1177,#1185,.T.); +#1185 = LINE('',#1186,#1187); +#1186 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#1187 = VECTOR('',#1188,1.); +#1188 = DIRECTION('',(0.,0.,1.)); +#1189 = PLANE('',#1190); +#1190 = AXIS2_PLACEMENT_3D('',#1191,#1192,#1193); +#1191 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#1192 = DIRECTION('',(0.,1.,0.)); +#1193 = DIRECTION('',(0.,-0.,1.)); +#1194 = ADVANCED_FACE('',(#1195),#1206,.T.); +#1195 = FACE_BOUND('',#1196,.T.); +#1196 = EDGE_LOOP('',(#1197,#1198,#1199,#1205)); +#1197 = ORIENTED_EDGE('',*,*,#966,.T.); +#1198 = ORIENTED_EDGE('',*,*,#1115,.T.); +#1199 = ORIENTED_EDGE('',*,*,#1200,.F.); +#1200 = EDGE_CURVE('',#982,#1106,#1201,.T.); +#1201 = LINE('',#1202,#1203); +#1202 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#1203 = VECTOR('',#1204,1.); +#1204 = DIRECTION('',(0.,1.,0.)); +#1205 = ORIENTED_EDGE('',*,*,#991,.F.); +#1206 = CYLINDRICAL_SURFACE('',#1207,4.5E-02); +#1207 = AXIS2_PLACEMENT_3D('',#1208,#1209,#1210); +#1208 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#1209 = DIRECTION('',(0.,1.,0.)); +#1210 = DIRECTION('',(-1.,0.,0.)); +#1211 = ADVANCED_FACE('',(#1212),#1223,.F.); +#1212 = FACE_BOUND('',#1213,.F.); +#1213 = EDGE_LOOP('',(#1214,#1215,#1216,#1217)); +#1214 = ORIENTED_EDGE('',*,*,#1105,.F.); +#1215 = ORIENTED_EDGE('',*,*,#1200,.F.); +#1216 = ORIENTED_EDGE('',*,*,#981,.T.); +#1217 = ORIENTED_EDGE('',*,*,#1218,.T.); +#1218 = EDGE_CURVE('',#984,#1108,#1219,.T.); +#1219 = LINE('',#1220,#1221); +#1220 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#1221 = VECTOR('',#1222,1.); +#1222 = DIRECTION('',(0.,1.,0.)); +#1223 = PLANE('',#1224); +#1224 = AXIS2_PLACEMENT_3D('',#1225,#1226,#1227); +#1225 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#1226 = DIRECTION('',(0.,0.,1.)); +#1227 = DIRECTION('',(1.,0.,-0.)); +#1228 = ADVANCED_FACE('',(#1229),#1240,.T.); +#1229 = FACE_BOUND('',#1230,.T.); +#1230 = EDGE_LOOP('',(#1231,#1232,#1233,#1234)); +#1231 = ORIENTED_EDGE('',*,*,#1035,.T.); +#1232 = ORIENTED_EDGE('',*,*,#1218,.T.); +#1233 = ORIENTED_EDGE('',*,*,#1159,.F.); +#1234 = ORIENTED_EDGE('',*,*,#1235,.F.); +#1235 = EDGE_CURVE('',#1028,#1152,#1236,.T.); +#1236 = LINE('',#1237,#1238); +#1237 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#1238 = VECTOR('',#1239,1.); +#1239 = DIRECTION('',(0.,1.,0.)); +#1240 = CYLINDRICAL_SURFACE('',#1241,4.5E-02); +#1241 = AXIS2_PLACEMENT_3D('',#1242,#1243,#1244); +#1242 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#1243 = DIRECTION('',(0.,1.,0.)); +#1244 = DIRECTION('',(1.,0.,0.)); +#1245 = ADVANCED_FACE('',(#1246),#1257,.T.); +#1246 = FACE_BOUND('',#1247,.T.); +#1247 = EDGE_LOOP('',(#1248,#1249,#1250,#1251)); +#1248 = ORIENTED_EDGE('',*,*,#1027,.F.); +#1249 = ORIENTED_EDGE('',*,*,#1235,.T.); +#1250 = ORIENTED_EDGE('',*,*,#1151,.T.); +#1251 = ORIENTED_EDGE('',*,*,#1252,.F.); +#1252 = EDGE_CURVE('',#1019,#1143,#1253,.T.); +#1253 = LINE('',#1254,#1255); +#1254 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#1255 = VECTOR('',#1256,1.); +#1256 = DIRECTION('',(0.,1.,0.)); +#1257 = PLANE('',#1258); +#1258 = AXIS2_PLACEMENT_3D('',#1259,#1260,#1261); +#1259 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#1260 = DIRECTION('',(1.,0.,0.)); +#1261 = DIRECTION('',(0.,0.,1.)); +#1262 = ADVANCED_FACE('',(#1263),#1274,.T.); +#1263 = FACE_BOUND('',#1264,.T.); +#1264 = EDGE_LOOP('',(#1265,#1266,#1267,#1273)); +#1265 = ORIENTED_EDGE('',*,*,#1252,.T.); +#1266 = ORIENTED_EDGE('',*,*,#1142,.T.); +#1267 = ORIENTED_EDGE('',*,*,#1268,.F.); +#1268 = EDGE_CURVE('',#1011,#1135,#1269,.T.); +#1269 = LINE('',#1270,#1271); +#1270 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#1271 = VECTOR('',#1272,1.); +#1272 = DIRECTION('',(0.,1.,0.)); +#1273 = ORIENTED_EDGE('',*,*,#1018,.F.); +#1274 = CYLINDRICAL_SURFACE('',#1275,4.5E-02); +#1275 = AXIS2_PLACEMENT_3D('',#1276,#1277,#1278); +#1276 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#1277 = DIRECTION('',(0.,1.,0.)); +#1278 = DIRECTION('',(1.,0.,0.)); +#1279 = ADVANCED_FACE('',(#1280),#1291,.T.); +#1280 = FACE_BOUND('',#1281,.T.); +#1281 = EDGE_LOOP('',(#1282,#1283,#1289,#1290)); +#1282 = ORIENTED_EDGE('',*,*,#1134,.F.); +#1283 = ORIENTED_EDGE('',*,*,#1284,.F.); +#1284 = EDGE_CURVE('',#1002,#1126,#1285,.T.); +#1285 = LINE('',#1286,#1287); +#1286 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#1287 = VECTOR('',#1288,1.); +#1288 = DIRECTION('',(0.,1.,0.)); +#1289 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1290 = ORIENTED_EDGE('',*,*,#1268,.T.); +#1291 = PLANE('',#1292); +#1292 = AXIS2_PLACEMENT_3D('',#1293,#1294,#1295); +#1293 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1294 = DIRECTION('',(0.,0.,1.)); +#1295 = DIRECTION('',(1.,0.,-0.)); +#1296 = ADVANCED_FACE('',(#1297),#1308,.T.); +#1297 = FACE_BOUND('',#1298,.T.); +#1298 = EDGE_LOOP('',(#1299,#1300,#1301,#1302)); +#1299 = ORIENTED_EDGE('',*,*,#1001,.T.); +#1300 = ORIENTED_EDGE('',*,*,#1284,.T.); +#1301 = ORIENTED_EDGE('',*,*,#1125,.F.); +#1302 = ORIENTED_EDGE('',*,*,#1303,.F.); +#1303 = EDGE_CURVE('',#836,#919,#1304,.T.); +#1304 = LINE('',#1305,#1306); +#1305 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#1306 = VECTOR('',#1307,1.); +#1307 = DIRECTION('',(0.,1.,0.)); +#1308 = CYLINDRICAL_SURFACE('',#1309,4.5E-02); +#1309 = AXIS2_PLACEMENT_3D('',#1310,#1311,#1312); +#1310 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#1311 = DIRECTION('',(0.,1.,0.)); +#1312 = DIRECTION('',(-1.,0.,0.)); +#1313 = ADVANCED_FACE('',(#1314),#1325,.T.); +#1314 = FACE_BOUND('',#1315,.T.); +#1315 = EDGE_LOOP('',(#1316,#1317,#1318,#1319)); +#1316 = ORIENTED_EDGE('',*,*,#1067,.F.); +#1317 = ORIENTED_EDGE('',*,*,#1303,.T.); +#1318 = ORIENTED_EDGE('',*,*,#1184,.T.); +#1319 = ORIENTED_EDGE('',*,*,#1320,.F.); +#1320 = EDGE_CURVE('',#1060,#1177,#1321,.T.); +#1321 = LINE('',#1322,#1323); +#1322 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1323 = VECTOR('',#1324,1.); +#1324 = DIRECTION('',(0.,1.,0.)); +#1325 = PLANE('',#1326); +#1326 = AXIS2_PLACEMENT_3D('',#1327,#1328,#1329); +#1327 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#1328 = DIRECTION('',(1.,0.,0.)); +#1329 = DIRECTION('',(0.,0.,1.)); +#1330 = ADVANCED_FACE('',(#1331),#1337,.T.); +#1331 = FACE_BOUND('',#1332,.T.); +#1332 = EDGE_LOOP('',(#1333,#1334,#1335,#1336)); +#1333 = ORIENTED_EDGE('',*,*,#1091,.F.); +#1334 = ORIENTED_EDGE('',*,*,#1059,.T.); +#1335 = ORIENTED_EDGE('',*,*,#1320,.T.); +#1336 = ORIENTED_EDGE('',*,*,#1176,.F.); +#1337 = PLANE('',#1338); +#1338 = AXIS2_PLACEMENT_3D('',#1339,#1340,#1341); +#1339 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1340 = DIRECTION('',(0.,0.,1.)); +#1341 = DIRECTION('',(1.,0.,-0.)); +#1342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1346)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1343,#1344,#1345)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1343 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1344 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1345 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1346 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#1343, + 'distance_accuracy_value','confusion accuracy'); +#1347 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1348,#1350); +#1348 = ( REPRESENTATION_RELATIONSHIP('','',#551,#528) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1349) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#1349 = ITEM_DEFINED_TRANSFORMATION('','',#11,#529); +#1350 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #1351); +#1351 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:3]','',#523,#546,$ + ); +#1352 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#548)); +#1353 = SHAPE_DEFINITION_REPRESENTATION(#1354,#1360); +#1354 = PRODUCT_DEFINITION_SHAPE('','',#1355); +#1355 = PRODUCT_DEFINITION('design','',#1356,#1359); +#1356 = PRODUCT_DEFINITION_FORMATION('','',#1357); +#1357 = PRODUCT('JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', + 'JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical','',(#1358)); +#1358 = PRODUCT_CONTEXT('',#2,'mechanical'); +#1359 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#1360 = SHAPE_REPRESENTATION('',(#11,#1361),#1365); +#1361 = AXIS2_PLACEMENT_3D('',#1362,#1363,#1364); +#1362 = CARTESIAN_POINT('',(0.,0.,0.)); +#1363 = DIRECTION('',(0.,0.,1.)); +#1364 = DIRECTION('',(1.,0.,-0.)); +#1365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1369)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1366,#1367,#1368)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1366 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1367 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1368 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1369 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#1366, + 'distance_accuracy_value','confusion accuracy'); +#1370 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1371,#1373); +#1371 = ( REPRESENTATION_RELATIONSHIP('','',#1360,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1372) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#1372 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); +#1373 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #1374); +#1374 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','P13','',#5,#1355,$); +#1375 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1357)); +#1376 = SHAPE_DEFINITION_REPRESENTATION(#1377,#1383); +#1377 = PRODUCT_DEFINITION_SHAPE('','',#1378); +#1378 = PRODUCT_DEFINITION('design','',#1379,#1382); +#1379 = PRODUCT_DEFINITION_FORMATION('','',#1380); +#1380 = PRODUCT('JST_B3B_XH_A','JST_B3B_XH_A','',(#1381)); +#1381 = PRODUCT_CONTEXT('',#2,'mechanical'); +#1382 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#1383 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#1384),#4905); +#1384 = MANIFOLD_SOLID_BREP('',#1385); +#1385 = CLOSED_SHELL('',(#1386,#1458,#1497,#1521,#1586,#1610,#1730,#1754 + ,#1819,#1844,#1893,#1910,#1934,#1951,#2121,#2145,#2379,#2403,#2436, + #2460,#2491,#2508,#2541,#2565,#2596,#2613,#2646,#2670,#2701,#2713, + #2746,#2763,#2780,#2792,#2906,#2923,#2940,#2957,#2974,#2991,#3008, + #3025,#3042,#3059,#3076,#3093,#3110,#3127,#3144,#3156,#3173,#3190, + #3207,#3253,#3299,#3345,#3376,#3400,#3424,#3441,#3472,#3496,#3520, + #3537,#3568,#3592,#3616,#3633,#3696,#3720,#3776,#3793,#3824,#3848, + #3872,#3889,#3952,#3976,#4032,#4049,#4080,#4104,#4128,#4145,#4176, + #4200,#4224,#4241,#4272,#4296,#4320,#4337,#4384,#4415,#4427,#4444, + #4470,#4503,#4534,#4558,#4582,#4599,#4646,#4677,#4689,#4706,#4732, + #4765,#4777,#4789,#4801,#4818,#4835,#4847,#4859,#4876,#4893)); +#1386 = ADVANCED_FACE('',(#1387),#1453,.T.); +#1387 = FACE_BOUND('',#1388,.T.); +#1388 = EDGE_LOOP('',(#1389,#1399,#1407,#1415,#1423,#1431,#1439,#1447)); +#1389 = ORIENTED_EDGE('',*,*,#1390,.T.); +#1390 = EDGE_CURVE('',#1391,#1393,#1395,.T.); +#1391 = VERTEX_POINT('',#1392); +#1392 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#1393 = VERTEX_POINT('',#1394); +#1394 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#1395 = LINE('',#1396,#1397); +#1396 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#1397 = VECTOR('',#1398,1.); +#1398 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1399 = ORIENTED_EDGE('',*,*,#1400,.T.); +#1400 = EDGE_CURVE('',#1393,#1401,#1403,.T.); +#1401 = VERTEX_POINT('',#1402); +#1402 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#1403 = LINE('',#1404,#1405); +#1404 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#1405 = VECTOR('',#1406,1.); +#1406 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1407 = ORIENTED_EDGE('',*,*,#1408,.T.); +#1408 = EDGE_CURVE('',#1401,#1409,#1411,.T.); +#1409 = VERTEX_POINT('',#1410); +#1410 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#1411 = LINE('',#1412,#1413); +#1412 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#1413 = VECTOR('',#1414,1.); +#1414 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1415 = ORIENTED_EDGE('',*,*,#1416,.T.); +#1416 = EDGE_CURVE('',#1409,#1417,#1419,.T.); +#1417 = VERTEX_POINT('',#1418); +#1418 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#1419 = LINE('',#1420,#1421); +#1420 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#1421 = VECTOR('',#1422,1.); +#1422 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1423 = ORIENTED_EDGE('',*,*,#1424,.T.); +#1424 = EDGE_CURVE('',#1417,#1425,#1427,.T.); +#1425 = VERTEX_POINT('',#1426); +#1426 = CARTESIAN_POINT('',(6.8,0.5,7.)); +#1427 = LINE('',#1428,#1429); +#1428 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#1429 = VECTOR('',#1430,1.); +#1430 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1431 = ORIENTED_EDGE('',*,*,#1432,.F.); +#1432 = EDGE_CURVE('',#1433,#1425,#1435,.T.); +#1433 = VERTEX_POINT('',#1434); +#1434 = CARTESIAN_POINT('',(6.8,-2.85,7.)); +#1435 = LINE('',#1436,#1437); +#1436 = CARTESIAN_POINT('',(6.8,-2.65,7.)); +#1437 = VECTOR('',#1438,1.); +#1438 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1439 = ORIENTED_EDGE('',*,*,#1440,.F.); +#1440 = EDGE_CURVE('',#1441,#1433,#1443,.T.); +#1441 = VERTEX_POINT('',#1442); +#1442 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#1443 = LINE('',#1444,#1445); +#1444 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#1445 = VECTOR('',#1446,1.); +#1446 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1447 = ORIENTED_EDGE('',*,*,#1448,.F.); +#1448 = EDGE_CURVE('',#1391,#1441,#1449,.T.); +#1449 = LINE('',#1450,#1451); +#1450 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#1451 = VECTOR('',#1452,1.); +#1452 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1453 = PLANE('',#1454); +#1454 = AXIS2_PLACEMENT_3D('',#1455,#1456,#1457); +#1455 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#1456 = DIRECTION('',(0.,0.,1.)); +#1457 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1458 = ADVANCED_FACE('',(#1459),#1492,.T.); +#1459 = FACE_BOUND('',#1460,.T.); +#1460 = EDGE_LOOP('',(#1461,#1471,#1479,#1485,#1486)); +#1461 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1462 = EDGE_CURVE('',#1463,#1465,#1467,.T.); +#1463 = VERTEX_POINT('',#1464); +#1464 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#1465 = VERTEX_POINT('',#1466); +#1466 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#1467 = LINE('',#1468,#1469); +#1468 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#1469 = VECTOR('',#1470,1.); +#1470 = DIRECTION('',(-0.,0.,-1.)); +#1471 = ORIENTED_EDGE('',*,*,#1472,.T.); +#1472 = EDGE_CURVE('',#1465,#1473,#1475,.T.); +#1473 = VERTEX_POINT('',#1474); +#1474 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#1475 = LINE('',#1476,#1477); +#1476 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1477 = VECTOR('',#1478,1.); +#1478 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1479 = ORIENTED_EDGE('',*,*,#1480,.T.); +#1480 = EDGE_CURVE('',#1473,#1393,#1481,.T.); +#1481 = LINE('',#1482,#1483); +#1482 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#1483 = VECTOR('',#1484,1.); +#1484 = DIRECTION('',(0.,0.,1.)); +#1485 = ORIENTED_EDGE('',*,*,#1390,.F.); +#1486 = ORIENTED_EDGE('',*,*,#1487,.T.); +#1487 = EDGE_CURVE('',#1391,#1463,#1488,.T.); +#1488 = LINE('',#1489,#1490); +#1489 = CARTESIAN_POINT('',(1.4,0.5,3.8)); +#1490 = VECTOR('',#1491,1.); +#1491 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#1492 = PLANE('',#1493); +#1493 = AXIS2_PLACEMENT_3D('',#1494,#1495,#1496); +#1494 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1495 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1496 = DIRECTION('',(0.,-0.,1.)); +#1497 = ADVANCED_FACE('',(#1498),#1516,.F.); +#1498 = FACE_BOUND('',#1499,.T.); +#1499 = EDGE_LOOP('',(#1500,#1501,#1502,#1510)); +#1500 = ORIENTED_EDGE('',*,*,#1487,.F.); +#1501 = ORIENTED_EDGE('',*,*,#1448,.T.); +#1502 = ORIENTED_EDGE('',*,*,#1503,.T.); +#1503 = EDGE_CURVE('',#1441,#1504,#1506,.T.); +#1504 = VERTEX_POINT('',#1505); +#1505 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#1506 = LINE('',#1507,#1508); +#1507 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#1508 = VECTOR('',#1509,1.); +#1509 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#1510 = ORIENTED_EDGE('',*,*,#1511,.F.); +#1511 = EDGE_CURVE('',#1463,#1504,#1512,.T.); +#1512 = LINE('',#1513,#1514); +#1513 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#1514 = VECTOR('',#1515,1.); +#1515 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1516 = PLANE('',#1517); +#1517 = AXIS2_PLACEMENT_3D('',#1518,#1519,#1520); +#1518 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#1519 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#1520 = DIRECTION('',(1.224646799147E-16,1.,-2.103984282776E-29)); +#1521 = ADVANCED_FACE('',(#1522),#1581,.F.); +#1522 = FACE_BOUND('',#1523,.F.); +#1523 = EDGE_LOOP('',(#1524,#1534,#1542,#1550,#1558,#1567,#1573,#1574, + #1575)); +#1524 = ORIENTED_EDGE('',*,*,#1525,.F.); +#1525 = EDGE_CURVE('',#1526,#1528,#1530,.T.); +#1526 = VERTEX_POINT('',#1527); +#1527 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1528 = VERTEX_POINT('',#1529); +#1529 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1530 = LINE('',#1531,#1532); +#1531 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1532 = VECTOR('',#1533,1.); +#1533 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1534 = ORIENTED_EDGE('',*,*,#1535,.T.); +#1535 = EDGE_CURVE('',#1526,#1536,#1538,.T.); +#1536 = VERTEX_POINT('',#1537); +#1537 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#1538 = LINE('',#1539,#1540); +#1539 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1540 = VECTOR('',#1541,1.); +#1541 = DIRECTION('',(0.,0.,1.)); +#1542 = ORIENTED_EDGE('',*,*,#1543,.T.); +#1543 = EDGE_CURVE('',#1536,#1544,#1546,.T.); +#1544 = VERTEX_POINT('',#1545); +#1545 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#1546 = LINE('',#1547,#1548); +#1547 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#1548 = VECTOR('',#1549,1.); +#1549 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1550 = ORIENTED_EDGE('',*,*,#1551,.T.); +#1551 = EDGE_CURVE('',#1544,#1552,#1554,.T.); +#1552 = VERTEX_POINT('',#1553); +#1553 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#1554 = LINE('',#1555,#1556); +#1555 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#1556 = VECTOR('',#1557,1.); +#1557 = DIRECTION('',(-0.,0.,-1.)); +#1558 = ORIENTED_EDGE('',*,*,#1559,.F.); +#1559 = EDGE_CURVE('',#1560,#1552,#1562,.T.); +#1560 = VERTEX_POINT('',#1561); +#1561 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#1562 = CIRCLE('',#1563,0.5); +#1563 = AXIS2_PLACEMENT_3D('',#1564,#1565,#1566); +#1564 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#1565 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1566 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1567 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1568 = EDGE_CURVE('',#1560,#1473,#1569,.T.); +#1569 = LINE('',#1570,#1571); +#1570 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#1571 = VECTOR('',#1572,1.); +#1572 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1573 = ORIENTED_EDGE('',*,*,#1480,.T.); +#1574 = ORIENTED_EDGE('',*,*,#1400,.T.); +#1575 = ORIENTED_EDGE('',*,*,#1576,.F.); +#1576 = EDGE_CURVE('',#1528,#1401,#1577,.T.); +#1577 = LINE('',#1578,#1579); +#1578 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1579 = VECTOR('',#1580,1.); +#1580 = DIRECTION('',(0.,0.,1.)); +#1581 = PLANE('',#1582); +#1582 = AXIS2_PLACEMENT_3D('',#1583,#1584,#1585); +#1583 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1584 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1585 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1586 = ADVANCED_FACE('',(#1587),#1605,.F.); +#1587 = FACE_BOUND('',#1588,.T.); +#1588 = EDGE_LOOP('',(#1589,#1590,#1591,#1599)); +#1589 = ORIENTED_EDGE('',*,*,#1503,.F.); +#1590 = ORIENTED_EDGE('',*,*,#1440,.T.); +#1591 = ORIENTED_EDGE('',*,*,#1592,.T.); +#1592 = EDGE_CURVE('',#1433,#1593,#1595,.T.); +#1593 = VERTEX_POINT('',#1594); +#1594 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#1595 = LINE('',#1596,#1597); +#1596 = CARTESIAN_POINT('',(5.3,-1.35,5.5)); +#1597 = VECTOR('',#1598,1.); +#1598 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#1599 = ORIENTED_EDGE('',*,*,#1600,.F.); +#1600 = EDGE_CURVE('',#1504,#1593,#1601,.T.); +#1601 = LINE('',#1602,#1603); +#1602 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#1603 = VECTOR('',#1604,1.); +#1604 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1605 = PLANE('',#1606); +#1606 = AXIS2_PLACEMENT_3D('',#1607,#1608,#1609); +#1607 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#1608 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#1609 = DIRECTION('',(-1.,1.224646799147E-16,-2.105273685727E-29)); +#1610 = ADVANCED_FACE('',(#1611),#1725,.F.); +#1611 = FACE_BOUND('',#1612,.F.); +#1612 = EDGE_LOOP('',(#1613,#1621,#1622,#1623,#1631,#1639,#1647,#1655, + #1663,#1671,#1679,#1687,#1695,#1703,#1711,#1719)); +#1613 = ORIENTED_EDGE('',*,*,#1614,.F.); +#1614 = EDGE_CURVE('',#1528,#1615,#1617,.T.); +#1615 = VERTEX_POINT('',#1616); +#1616 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#1617 = LINE('',#1618,#1619); +#1618 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1619 = VECTOR('',#1620,1.); +#1620 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1621 = ORIENTED_EDGE('',*,*,#1576,.T.); +#1622 = ORIENTED_EDGE('',*,*,#1408,.T.); +#1623 = ORIENTED_EDGE('',*,*,#1624,.F.); +#1624 = EDGE_CURVE('',#1625,#1409,#1627,.T.); +#1625 = VERTEX_POINT('',#1626); +#1626 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1627 = LINE('',#1628,#1629); +#1628 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1629 = VECTOR('',#1630,1.); +#1630 = DIRECTION('',(0.,0.,1.)); +#1631 = ORIENTED_EDGE('',*,*,#1632,.F.); +#1632 = EDGE_CURVE('',#1633,#1625,#1635,.T.); +#1633 = VERTEX_POINT('',#1634); +#1634 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#1635 = LINE('',#1636,#1637); +#1636 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1637 = VECTOR('',#1638,1.); +#1638 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1639 = ORIENTED_EDGE('',*,*,#1640,.F.); +#1640 = EDGE_CURVE('',#1641,#1633,#1643,.T.); +#1641 = VERTEX_POINT('',#1642); +#1642 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#1643 = LINE('',#1644,#1645); +#1644 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#1645 = VECTOR('',#1646,1.); +#1646 = DIRECTION('',(-0.,0.,-1.)); +#1647 = ORIENTED_EDGE('',*,*,#1648,.T.); +#1648 = EDGE_CURVE('',#1641,#1649,#1651,.T.); +#1649 = VERTEX_POINT('',#1650); +#1650 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#1651 = LINE('',#1652,#1653); +#1652 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#1653 = VECTOR('',#1654,1.); +#1654 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1655 = ORIENTED_EDGE('',*,*,#1656,.T.); +#1656 = EDGE_CURVE('',#1649,#1657,#1659,.T.); +#1657 = VERTEX_POINT('',#1658); +#1658 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#1659 = LINE('',#1660,#1661); +#1660 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#1661 = VECTOR('',#1662,1.); +#1662 = DIRECTION('',(-0.,0.,-1.)); +#1663 = ORIENTED_EDGE('',*,*,#1664,.F.); +#1664 = EDGE_CURVE('',#1665,#1657,#1667,.T.); +#1665 = VERTEX_POINT('',#1666); +#1666 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#1667 = LINE('',#1668,#1669); +#1668 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1669 = VECTOR('',#1670,1.); +#1670 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1671 = ORIENTED_EDGE('',*,*,#1672,.F.); +#1672 = EDGE_CURVE('',#1673,#1665,#1675,.T.); +#1673 = VERTEX_POINT('',#1674); +#1674 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#1675 = LINE('',#1676,#1677); +#1676 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#1677 = VECTOR('',#1678,1.); +#1678 = DIRECTION('',(-0.,0.,-1.)); +#1679 = ORIENTED_EDGE('',*,*,#1680,.T.); +#1680 = EDGE_CURVE('',#1673,#1681,#1683,.T.); +#1681 = VERTEX_POINT('',#1682); +#1682 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#1683 = LINE('',#1684,#1685); +#1684 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#1685 = VECTOR('',#1686,1.); +#1686 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1687 = ORIENTED_EDGE('',*,*,#1688,.T.); +#1688 = EDGE_CURVE('',#1681,#1689,#1691,.T.); +#1689 = VERTEX_POINT('',#1690); +#1690 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#1691 = LINE('',#1692,#1693); +#1692 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#1693 = VECTOR('',#1694,1.); +#1694 = DIRECTION('',(-0.,0.,-1.)); +#1695 = ORIENTED_EDGE('',*,*,#1696,.F.); +#1696 = EDGE_CURVE('',#1697,#1689,#1699,.T.); +#1697 = VERTEX_POINT('',#1698); +#1698 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#1699 = LINE('',#1700,#1701); +#1700 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1701 = VECTOR('',#1702,1.); +#1702 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1703 = ORIENTED_EDGE('',*,*,#1704,.F.); +#1704 = EDGE_CURVE('',#1705,#1697,#1707,.T.); +#1705 = VERTEX_POINT('',#1706); +#1706 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#1707 = LINE('',#1708,#1709); +#1708 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#1709 = VECTOR('',#1710,1.); +#1710 = DIRECTION('',(-0.,0.,-1.)); +#1711 = ORIENTED_EDGE('',*,*,#1712,.T.); +#1712 = EDGE_CURVE('',#1705,#1713,#1715,.T.); +#1713 = VERTEX_POINT('',#1714); +#1714 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#1715 = LINE('',#1716,#1717); +#1716 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#1717 = VECTOR('',#1718,1.); +#1718 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1719 = ORIENTED_EDGE('',*,*,#1720,.T.); +#1720 = EDGE_CURVE('',#1713,#1615,#1721,.T.); +#1721 = LINE('',#1722,#1723); +#1722 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#1723 = VECTOR('',#1724,1.); +#1724 = DIRECTION('',(-0.,0.,-1.)); +#1725 = PLANE('',#1726); +#1726 = AXIS2_PLACEMENT_3D('',#1727,#1728,#1729); +#1727 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1728 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1729 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1730 = ADVANCED_FACE('',(#1731),#1749,.F.); +#1731 = FACE_BOUND('',#1732,.T.); +#1732 = EDGE_LOOP('',(#1733,#1734,#1735,#1743)); +#1733 = ORIENTED_EDGE('',*,*,#1592,.F.); +#1734 = ORIENTED_EDGE('',*,*,#1432,.T.); +#1735 = ORIENTED_EDGE('',*,*,#1736,.T.); +#1736 = EDGE_CURVE('',#1425,#1737,#1739,.T.); +#1737 = VERTEX_POINT('',#1738); +#1738 = CARTESIAN_POINT('',(6.6,0.5,6.8)); +#1739 = LINE('',#1740,#1741); +#1740 = CARTESIAN_POINT('',(6.075,0.5,6.275)); +#1741 = VECTOR('',#1742,1.); +#1742 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#1743 = ORIENTED_EDGE('',*,*,#1744,.F.); +#1744 = EDGE_CURVE('',#1593,#1737,#1745,.T.); +#1745 = LINE('',#1746,#1747); +#1746 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#1747 = VECTOR('',#1748,1.); +#1748 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1749 = PLANE('',#1750); +#1750 = AXIS2_PLACEMENT_3D('',#1751,#1752,#1753); +#1751 = CARTESIAN_POINT('',(6.7,-2.65,6.9)); +#1752 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#1753 = DIRECTION('',(-1.224646799147E-16,-1.,-2.103984282776E-29)); +#1754 = ADVANCED_FACE('',(#1755),#1814,.F.); +#1755 = FACE_BOUND('',#1756,.F.); +#1756 = EDGE_LOOP('',(#1757,#1765,#1766,#1767,#1775,#1783,#1792,#1800, + #1808)); +#1757 = ORIENTED_EDGE('',*,*,#1758,.F.); +#1758 = EDGE_CURVE('',#1625,#1759,#1761,.T.); +#1759 = VERTEX_POINT('',#1760); +#1760 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#1761 = LINE('',#1762,#1763); +#1762 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1763 = VECTOR('',#1764,1.); +#1764 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1765 = ORIENTED_EDGE('',*,*,#1624,.T.); +#1766 = ORIENTED_EDGE('',*,*,#1416,.T.); +#1767 = ORIENTED_EDGE('',*,*,#1768,.F.); +#1768 = EDGE_CURVE('',#1769,#1417,#1771,.T.); +#1769 = VERTEX_POINT('',#1770); +#1770 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1771 = LINE('',#1772,#1773); +#1772 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1773 = VECTOR('',#1774,1.); +#1774 = DIRECTION('',(0.,0.,1.)); +#1775 = ORIENTED_EDGE('',*,*,#1776,.F.); +#1776 = EDGE_CURVE('',#1777,#1769,#1779,.T.); +#1777 = VERTEX_POINT('',#1778); +#1778 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1779 = LINE('',#1780,#1781); +#1780 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1781 = VECTOR('',#1782,1.); +#1782 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1783 = ORIENTED_EDGE('',*,*,#1784,.F.); +#1784 = EDGE_CURVE('',#1785,#1777,#1787,.T.); +#1785 = VERTEX_POINT('',#1786); +#1786 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#1787 = CIRCLE('',#1788,0.5); +#1788 = AXIS2_PLACEMENT_3D('',#1789,#1790,#1791); +#1789 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#1790 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1791 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1792 = ORIENTED_EDGE('',*,*,#1793,.F.); +#1793 = EDGE_CURVE('',#1794,#1785,#1796,.T.); +#1794 = VERTEX_POINT('',#1795); +#1795 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#1796 = LINE('',#1797,#1798); +#1797 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#1798 = VECTOR('',#1799,1.); +#1799 = DIRECTION('',(-0.,0.,-1.)); +#1800 = ORIENTED_EDGE('',*,*,#1801,.T.); +#1801 = EDGE_CURVE('',#1794,#1802,#1804,.T.); +#1802 = VERTEX_POINT('',#1803); +#1803 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#1804 = LINE('',#1805,#1806); +#1805 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#1806 = VECTOR('',#1807,1.); +#1807 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1808 = ORIENTED_EDGE('',*,*,#1809,.F.); +#1809 = EDGE_CURVE('',#1759,#1802,#1810,.T.); +#1810 = LINE('',#1811,#1812); +#1811 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#1812 = VECTOR('',#1813,1.); +#1813 = DIRECTION('',(0.,0.,1.)); +#1814 = PLANE('',#1815); +#1815 = AXIS2_PLACEMENT_3D('',#1816,#1817,#1818); +#1816 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1817 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1818 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1819 = ADVANCED_FACE('',(#1820),#1839,.T.); +#1820 = FACE_BOUND('',#1821,.T.); +#1821 = EDGE_LOOP('',(#1822,#1823,#1824,#1832,#1838)); +#1822 = ORIENTED_EDGE('',*,*,#1424,.F.); +#1823 = ORIENTED_EDGE('',*,*,#1768,.F.); +#1824 = ORIENTED_EDGE('',*,*,#1825,.T.); +#1825 = EDGE_CURVE('',#1769,#1826,#1828,.T.); +#1826 = VERTEX_POINT('',#1827); +#1827 = CARTESIAN_POINT('',(6.6,0.5,3.65)); +#1828 = LINE('',#1829,#1830); +#1829 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1830 = VECTOR('',#1831,1.); +#1831 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1832 = ORIENTED_EDGE('',*,*,#1833,.T.); +#1833 = EDGE_CURVE('',#1826,#1737,#1834,.T.); +#1834 = LINE('',#1835,#1836); +#1835 = CARTESIAN_POINT('',(6.6,0.5,5.325)); +#1836 = VECTOR('',#1837,1.); +#1837 = DIRECTION('',(0.,0.,1.)); +#1838 = ORIENTED_EDGE('',*,*,#1736,.F.); +#1839 = PLANE('',#1840); +#1840 = AXIS2_PLACEMENT_3D('',#1841,#1842,#1843); +#1841 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1842 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1843 = DIRECTION('',(0.,-0.,1.)); +#1844 = ADVANCED_FACE('',(#1845),#1888,.F.); +#1845 = FACE_BOUND('',#1846,.F.); +#1846 = EDGE_LOOP('',(#1847,#1848,#1856,#1865,#1873,#1881,#1887)); +#1847 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1848 = ORIENTED_EDGE('',*,*,#1849,.T.); +#1849 = EDGE_CURVE('',#1465,#1850,#1852,.T.); +#1850 = VERTEX_POINT('',#1851); +#1851 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#1852 = LINE('',#1853,#1854); +#1853 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#1854 = VECTOR('',#1855,1.); +#1855 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1856 = ORIENTED_EDGE('',*,*,#1857,.T.); +#1857 = EDGE_CURVE('',#1850,#1858,#1860,.T.); +#1858 = VERTEX_POINT('',#1859); +#1859 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#1860 = CIRCLE('',#1861,0.5); +#1861 = AXIS2_PLACEMENT_3D('',#1862,#1863,#1864); +#1862 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#1863 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1864 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1865 = ORIENTED_EDGE('',*,*,#1866,.T.); +#1866 = EDGE_CURVE('',#1858,#1867,#1869,.T.); +#1867 = VERTEX_POINT('',#1868); +#1868 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#1869 = LINE('',#1870,#1871); +#1870 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#1871 = VECTOR('',#1872,1.); +#1872 = DIRECTION('',(0.,0.,-1.)); +#1873 = ORIENTED_EDGE('',*,*,#1874,.T.); +#1874 = EDGE_CURVE('',#1867,#1875,#1877,.T.); +#1875 = VERTEX_POINT('',#1876); +#1876 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#1877 = LINE('',#1878,#1879); +#1878 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#1879 = VECTOR('',#1880,1.); +#1880 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1881 = ORIENTED_EDGE('',*,*,#1882,.F.); +#1882 = EDGE_CURVE('',#1504,#1875,#1883,.T.); +#1883 = LINE('',#1884,#1885); +#1884 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#1885 = VECTOR('',#1886,1.); +#1886 = DIRECTION('',(0.,0.,-1.)); +#1887 = ORIENTED_EDGE('',*,*,#1511,.F.); +#1888 = PLANE('',#1889); +#1889 = AXIS2_PLACEMENT_3D('',#1890,#1891,#1892); +#1890 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#1891 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1892 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1893 = ADVANCED_FACE('',(#1894),#1905,.T.); +#1894 = FACE_BOUND('',#1895,.T.); +#1895 = EDGE_LOOP('',(#1896,#1897,#1903,#1904)); +#1896 = ORIENTED_EDGE('',*,*,#1849,.T.); +#1897 = ORIENTED_EDGE('',*,*,#1898,.T.); +#1898 = EDGE_CURVE('',#1850,#1560,#1899,.T.); +#1899 = LINE('',#1900,#1901); +#1900 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1901 = VECTOR('',#1902,1.); +#1902 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1903 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1904 = ORIENTED_EDGE('',*,*,#1472,.F.); +#1905 = PLANE('',#1906); +#1906 = AXIS2_PLACEMENT_3D('',#1907,#1908,#1909); +#1907 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1908 = DIRECTION('',(0.,0.,1.)); +#1909 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1910 = ADVANCED_FACE('',(#1911),#1929,.F.); +#1911 = FACE_BOUND('',#1912,.F.); +#1912 = EDGE_LOOP('',(#1913,#1914,#1915,#1923)); +#1913 = ORIENTED_EDGE('',*,*,#1525,.T.); +#1914 = ORIENTED_EDGE('',*,*,#1614,.T.); +#1915 = ORIENTED_EDGE('',*,*,#1916,.T.); +#1916 = EDGE_CURVE('',#1615,#1917,#1919,.T.); +#1917 = VERTEX_POINT('',#1918); +#1918 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#1919 = LINE('',#1920,#1921); +#1920 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#1921 = VECTOR('',#1922,1.); +#1922 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1923 = ORIENTED_EDGE('',*,*,#1924,.T.); +#1924 = EDGE_CURVE('',#1917,#1526,#1925,.T.); +#1925 = LINE('',#1926,#1927); +#1926 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#1927 = VECTOR('',#1928,1.); +#1928 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1929 = PLANE('',#1930); +#1930 = AXIS2_PLACEMENT_3D('',#1931,#1932,#1933); +#1931 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#1932 = DIRECTION('',(0.,0.,1.)); +#1933 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1934 = ADVANCED_FACE('',(#1935),#1946,.F.); +#1935 = FACE_BOUND('',#1936,.F.); +#1936 = EDGE_LOOP('',(#1937,#1938,#1939,#1945)); +#1937 = ORIENTED_EDGE('',*,*,#1898,.T.); +#1938 = ORIENTED_EDGE('',*,*,#1559,.T.); +#1939 = ORIENTED_EDGE('',*,*,#1940,.F.); +#1940 = EDGE_CURVE('',#1858,#1552,#1941,.T.); +#1941 = LINE('',#1942,#1943); +#1942 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#1943 = VECTOR('',#1944,1.); +#1944 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1945 = ORIENTED_EDGE('',*,*,#1857,.F.); +#1946 = CYLINDRICAL_SURFACE('',#1947,0.5); +#1947 = AXIS2_PLACEMENT_3D('',#1948,#1949,#1950); +#1948 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#1949 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#1950 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1951 = ADVANCED_FACE('',(#1952),#2116,.T.); +#1952 = FACE_BOUND('',#1953,.T.); +#1953 = EDGE_LOOP('',(#1954,#1955,#1963,#1971,#1979,#1987,#1995,#2004, + #2012,#2020,#2028,#2036,#2044,#2053,#2061,#2069,#2077,#2085,#2091, + #2092,#2093,#2094,#2102,#2110)); +#1954 = ORIENTED_EDGE('',*,*,#1793,.F.); +#1955 = ORIENTED_EDGE('',*,*,#1956,.T.); +#1956 = EDGE_CURVE('',#1794,#1957,#1959,.T.); +#1957 = VERTEX_POINT('',#1958); +#1958 = CARTESIAN_POINT('',(5.5,1.5,7.)); +#1959 = LINE('',#1960,#1961); +#1960 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#1961 = VECTOR('',#1962,1.); +#1962 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1963 = ORIENTED_EDGE('',*,*,#1964,.T.); +#1964 = EDGE_CURVE('',#1957,#1965,#1967,.T.); +#1965 = VERTEX_POINT('',#1966); +#1966 = CARTESIAN_POINT('',(5.5,1.5,6.1)); +#1967 = LINE('',#1968,#1969); +#1968 = CARTESIAN_POINT('',(5.5,1.5,5.327450166113)); +#1969 = VECTOR('',#1970,1.); +#1970 = DIRECTION('',(-4.93432455389E-16,8.449221308824E-17,-1.)); +#1971 = ORIENTED_EDGE('',*,*,#1972,.T.); +#1972 = EDGE_CURVE('',#1965,#1973,#1975,.T.); +#1973 = VERTEX_POINT('',#1974); +#1974 = CARTESIAN_POINT('',(5.25,1.5,5.85)); +#1975 = LINE('',#1976,#1977); +#1976 = CARTESIAN_POINT('',(4.238725083056,1.5,4.838725083056)); +#1977 = VECTOR('',#1978,1.); +#1978 = DIRECTION('',(-0.707106781187,1.463406224556E-16,-0.707106781187 + )); +#1979 = ORIENTED_EDGE('',*,*,#1980,.T.); +#1980 = EDGE_CURVE('',#1973,#1981,#1983,.T.); +#1981 = VERTEX_POINT('',#1982); +#1982 = CARTESIAN_POINT('',(5.5,1.5,5.6)); +#1983 = LINE('',#1984,#1985); +#1984 = CARTESIAN_POINT('',(5.011274916944,1.5,6.088725083056)); +#1985 = VECTOR('',#1986,1.); +#1986 = DIRECTION('',(0.707106781187,-2.685058879138E-17,-0.707106781187 + )); +#1987 = ORIENTED_EDGE('',*,*,#1988,.T.); +#1988 = EDGE_CURVE('',#1981,#1989,#1991,.T.); +#1989 = VERTEX_POINT('',#1990); +#1990 = CARTESIAN_POINT('',(5.5,1.5,3.85)); +#1991 = LINE('',#1992,#1993); +#1992 = CARTESIAN_POINT('',(5.5,1.5,3.827450166113)); +#1993 = VECTOR('',#1994,1.); +#1994 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#1995 = ORIENTED_EDGE('',*,*,#1996,.F.); +#1996 = EDGE_CURVE('',#1997,#1989,#1999,.T.); +#1997 = VERTEX_POINT('',#1998); +#1998 = CARTESIAN_POINT('',(4.75,1.5,3.1)); +#1999 = CIRCLE('',#2000,0.75); +#2000 = AXIS2_PLACEMENT_3D('',#2001,#2002,#2003); +#2001 = CARTESIAN_POINT('',(4.75,1.5,3.85)); +#2002 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2003 = DIRECTION('',(-0.,0.,-1.)); +#2004 = ORIENTED_EDGE('',*,*,#2005,.T.); +#2005 = EDGE_CURVE('',#1997,#2006,#2008,.T.); +#2006 = VERTEX_POINT('',#2007); +#2007 = CARTESIAN_POINT('',(4.,1.5,3.1)); +#2008 = LINE('',#2009,#2010); +#2009 = CARTESIAN_POINT('',(3.25,1.5,3.1)); +#2010 = VECTOR('',#2011,1.); +#2011 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2012 = ORIENTED_EDGE('',*,*,#2013,.T.); +#2013 = EDGE_CURVE('',#2006,#2014,#2016,.T.); +#2014 = VERTEX_POINT('',#2015); +#2015 = CARTESIAN_POINT('',(4.,1.5,7.)); +#2016 = LINE('',#2017,#2018); +#2017 = CARTESIAN_POINT('',(4.,1.5,5.777450166113)); +#2018 = VECTOR('',#2019,1.); +#2019 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#2020 = ORIENTED_EDGE('',*,*,#2021,.T.); +#2021 = EDGE_CURVE('',#2014,#2022,#2024,.T.); +#2022 = VERTEX_POINT('',#2023); +#2023 = CARTESIAN_POINT('',(1.,1.5,7.)); +#2024 = LINE('',#2025,#2026); +#2025 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#2026 = VECTOR('',#2027,1.); +#2027 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2028 = ORIENTED_EDGE('',*,*,#2029,.F.); +#2029 = EDGE_CURVE('',#2030,#2022,#2032,.T.); +#2030 = VERTEX_POINT('',#2031); +#2031 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#2032 = LINE('',#2033,#2034); +#2033 = CARTESIAN_POINT('',(1.,1.5,5.777450166113)); +#2034 = VECTOR('',#2035,1.); +#2035 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#2036 = ORIENTED_EDGE('',*,*,#2037,.F.); +#2037 = EDGE_CURVE('',#2038,#2030,#2040,.T.); +#2038 = VERTEX_POINT('',#2039); +#2039 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#2040 = LINE('',#2041,#2042); +#2041 = CARTESIAN_POINT('',(1.75,1.5,3.1)); +#2042 = VECTOR('',#2043,1.); +#2043 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#2044 = ORIENTED_EDGE('',*,*,#2045,.F.); +#2045 = EDGE_CURVE('',#2046,#2038,#2048,.T.); +#2046 = VERTEX_POINT('',#2047); +#2047 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#2048 = CIRCLE('',#2049,0.75); +#2049 = AXIS2_PLACEMENT_3D('',#2050,#2051,#2052); +#2050 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#2051 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2052 = DIRECTION('',(-0.,0.,-1.)); +#2053 = ORIENTED_EDGE('',*,*,#2054,.F.); +#2054 = EDGE_CURVE('',#2055,#2046,#2057,.T.); +#2055 = VERTEX_POINT('',#2056); +#2056 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#2057 = LINE('',#2058,#2059); +#2058 = CARTESIAN_POINT('',(-0.5,1.5,3.827450166113)); +#2059 = VECTOR('',#2060,1.); +#2060 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#2061 = ORIENTED_EDGE('',*,*,#2062,.F.); +#2062 = EDGE_CURVE('',#2063,#2055,#2065,.T.); +#2063 = VERTEX_POINT('',#2064); +#2064 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#2065 = LINE('',#2066,#2067); +#2066 = CARTESIAN_POINT('',(-1.127491694352E-02,1.5,6.088725083056)); +#2067 = VECTOR('',#2068,1.); +#2068 = DIRECTION('',(-0.707106781187,1.463406224556E-16,-0.707106781187 + )); +#2069 = ORIENTED_EDGE('',*,*,#2070,.F.); +#2070 = EDGE_CURVE('',#2071,#2063,#2073,.T.); +#2071 = VERTEX_POINT('',#2072); +#2072 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#2073 = LINE('',#2074,#2075); +#2074 = CARTESIAN_POINT('',(0.761274916944,1.5,4.838725083056)); +#2075 = VECTOR('',#2076,1.); +#2076 = DIRECTION('',(0.707106781187,-2.685058879138E-17,-0.707106781187 + )); +#2077 = ORIENTED_EDGE('',*,*,#2078,.F.); +#2078 = EDGE_CURVE('',#2079,#2071,#2081,.T.); +#2079 = VERTEX_POINT('',#2080); +#2080 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#2081 = LINE('',#2082,#2083); +#2082 = CARTESIAN_POINT('',(-0.5,1.5,5.327450166113)); +#2083 = VECTOR('',#2084,1.); +#2084 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#2085 = ORIENTED_EDGE('',*,*,#2086,.T.); +#2086 = EDGE_CURVE('',#2079,#1544,#2087,.T.); +#2087 = LINE('',#2088,#2089); +#2088 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#2089 = VECTOR('',#2090,1.); +#2090 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2091 = ORIENTED_EDGE('',*,*,#1551,.T.); +#2092 = ORIENTED_EDGE('',*,*,#1940,.F.); +#2093 = ORIENTED_EDGE('',*,*,#1866,.T.); +#2094 = ORIENTED_EDGE('',*,*,#2095,.F.); +#2095 = EDGE_CURVE('',#2096,#1867,#2098,.T.); +#2096 = VERTEX_POINT('',#2097); +#2097 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#2098 = LINE('',#2099,#2100); +#2099 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#2100 = VECTOR('',#2101,1.); +#2101 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2102 = ORIENTED_EDGE('',*,*,#2103,.F.); +#2103 = EDGE_CURVE('',#2104,#2096,#2106,.T.); +#2104 = VERTEX_POINT('',#2105); +#2105 = CARTESIAN_POINT('',(6.6,1.5,4.15)); +#2106 = LINE('',#2107,#2108); +#2107 = CARTESIAN_POINT('',(6.6,1.5,7.)); +#2108 = VECTOR('',#2109,1.); +#2109 = DIRECTION('',(0.,0.,-1.)); +#2110 = ORIENTED_EDGE('',*,*,#2111,.F.); +#2111 = EDGE_CURVE('',#1785,#2104,#2112,.T.); +#2112 = LINE('',#2113,#2114); +#2113 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#2114 = VECTOR('',#2115,1.); +#2115 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2116 = PLANE('',#2117); +#2117 = AXIS2_PLACEMENT_3D('',#2118,#2119,#2120); +#2118 = CARTESIAN_POINT('',(2.5,1.5,4.554900332226)); +#2119 = DIRECTION('',(-1.224646799147E-16,-1.,-8.449221308824E-17)); +#2120 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#2121 = ADVANCED_FACE('',(#2122),#2140,.T.); +#2122 = FACE_BOUND('',#2123,.T.); +#2123 = EDGE_LOOP('',(#2124,#2125,#2133,#2139)); +#2124 = ORIENTED_EDGE('',*,*,#2086,.F.); +#2125 = ORIENTED_EDGE('',*,*,#2126,.F.); +#2126 = EDGE_CURVE('',#2127,#2079,#2129,.T.); +#2127 = VERTEX_POINT('',#2128); +#2128 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#2129 = LINE('',#2130,#2131); +#2130 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#2131 = VECTOR('',#2132,1.); +#2132 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2133 = ORIENTED_EDGE('',*,*,#2134,.T.); +#2134 = EDGE_CURVE('',#2127,#1536,#2135,.T.); +#2135 = LINE('',#2136,#2137); +#2136 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#2137 = VECTOR('',#2138,1.); +#2138 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2139 = ORIENTED_EDGE('',*,*,#1543,.T.); +#2140 = PLANE('',#2141); +#2141 = AXIS2_PLACEMENT_3D('',#2142,#2143,#2144); +#2142 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#2143 = DIRECTION('',(0.,0.,1.)); +#2144 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2145 = ADVANCED_FACE('',(#2146),#2374,.F.); +#2146 = FACE_BOUND('',#2147,.F.); +#2147 = EDGE_LOOP('',(#2148,#2156,#2157,#2165,#2173,#2181,#2189,#2197, + #2206,#2214,#2222,#2230,#2238,#2246,#2255,#2263,#2271,#2279,#2285, + #2286,#2287,#2288,#2296,#2304,#2312,#2320,#2328,#2336,#2344,#2352, + #2360,#2368)); +#2148 = ORIENTED_EDGE('',*,*,#2149,.F.); +#2149 = EDGE_CURVE('',#1759,#2150,#2152,.T.); +#2150 = VERTEX_POINT('',#2151); +#2151 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#2152 = LINE('',#2153,#2154); +#2153 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2154 = VECTOR('',#2155,1.); +#2155 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2156 = ORIENTED_EDGE('',*,*,#1809,.T.); +#2157 = ORIENTED_EDGE('',*,*,#2158,.T.); +#2158 = EDGE_CURVE('',#1802,#2159,#2161,.T.); +#2159 = VERTEX_POINT('',#2160); +#2160 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#2161 = LINE('',#2162,#2163); +#2162 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#2163 = VECTOR('',#2164,1.); +#2164 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2165 = ORIENTED_EDGE('',*,*,#2166,.F.); +#2166 = EDGE_CURVE('',#2167,#2159,#2169,.T.); +#2167 = VERTEX_POINT('',#2168); +#2168 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#2169 = LINE('',#2170,#2171); +#2170 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#2171 = VECTOR('',#2172,1.); +#2172 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#2173 = ORIENTED_EDGE('',*,*,#2174,.F.); +#2174 = EDGE_CURVE('',#2175,#2167,#2177,.T.); +#2175 = VERTEX_POINT('',#2176); +#2176 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#2177 = LINE('',#2178,#2179); +#2178 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#2179 = VECTOR('',#2180,1.); +#2180 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#2181 = ORIENTED_EDGE('',*,*,#2182,.F.); +#2182 = EDGE_CURVE('',#2183,#2175,#2185,.T.); +#2183 = VERTEX_POINT('',#2184); +#2184 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#2185 = LINE('',#2186,#2187); +#2186 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#2187 = VECTOR('',#2188,1.); +#2188 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2189 = ORIENTED_EDGE('',*,*,#2190,.F.); +#2190 = EDGE_CURVE('',#2191,#2183,#2193,.T.); +#2191 = VERTEX_POINT('',#2192); +#2192 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#2193 = LINE('',#2194,#2195); +#2194 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#2195 = VECTOR('',#2196,1.); +#2196 = DIRECTION('',(0.,0.,1.)); +#2197 = ORIENTED_EDGE('',*,*,#2198,.F.); +#2198 = EDGE_CURVE('',#2199,#2191,#2201,.T.); +#2199 = VERTEX_POINT('',#2200); +#2200 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#2201 = CIRCLE('',#2202,0.75); +#2202 = AXIS2_PLACEMENT_3D('',#2203,#2204,#2205); +#2203 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#2204 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2205 = DIRECTION('',(0.,0.,1.)); +#2206 = ORIENTED_EDGE('',*,*,#2207,.F.); +#2207 = EDGE_CURVE('',#2208,#2199,#2210,.T.); +#2208 = VERTEX_POINT('',#2209); +#2209 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#2210 = LINE('',#2211,#2212); +#2211 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#2212 = VECTOR('',#2213,1.); +#2213 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2214 = ORIENTED_EDGE('',*,*,#2215,.F.); +#2215 = EDGE_CURVE('',#2216,#2208,#2218,.T.); +#2216 = VERTEX_POINT('',#2217); +#2217 = CARTESIAN_POINT('',(4.,2.35,7.)); +#2218 = LINE('',#2219,#2220); +#2219 = CARTESIAN_POINT('',(4.,2.35,7.)); +#2220 = VECTOR('',#2221,1.); +#2221 = DIRECTION('',(-0.,0.,-1.)); +#2222 = ORIENTED_EDGE('',*,*,#2223,.T.); +#2223 = EDGE_CURVE('',#2216,#2224,#2226,.T.); +#2224 = VERTEX_POINT('',#2225); +#2225 = CARTESIAN_POINT('',(1.,2.35,7.)); +#2226 = LINE('',#2227,#2228); +#2227 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#2228 = VECTOR('',#2229,1.); +#2229 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2230 = ORIENTED_EDGE('',*,*,#2231,.T.); +#2231 = EDGE_CURVE('',#2224,#2232,#2234,.T.); +#2232 = VERTEX_POINT('',#2233); +#2233 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#2234 = LINE('',#2235,#2236); +#2235 = CARTESIAN_POINT('',(1.,2.35,7.)); +#2236 = VECTOR('',#2237,1.); +#2237 = DIRECTION('',(-0.,0.,-1.)); +#2238 = ORIENTED_EDGE('',*,*,#2239,.T.); +#2239 = EDGE_CURVE('',#2232,#2240,#2242,.T.); +#2240 = VERTEX_POINT('',#2241); +#2241 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#2242 = LINE('',#2243,#2244); +#2243 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#2244 = VECTOR('',#2245,1.); +#2245 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2246 = ORIENTED_EDGE('',*,*,#2247,.T.); +#2247 = EDGE_CURVE('',#2240,#2248,#2250,.T.); +#2248 = VERTEX_POINT('',#2249); +#2249 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#2250 = CIRCLE('',#2251,0.75); +#2251 = AXIS2_PLACEMENT_3D('',#2252,#2253,#2254); +#2252 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#2253 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#2254 = DIRECTION('',(0.,0.,1.)); +#2255 = ORIENTED_EDGE('',*,*,#2256,.T.); +#2256 = EDGE_CURVE('',#2248,#2257,#2259,.T.); +#2257 = VERTEX_POINT('',#2258); +#2258 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2259 = LINE('',#2260,#2261); +#2260 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#2261 = VECTOR('',#2262,1.); +#2262 = DIRECTION('',(0.,0.,1.)); +#2263 = ORIENTED_EDGE('',*,*,#2264,.T.); +#2264 = EDGE_CURVE('',#2257,#2265,#2267,.T.); +#2265 = VERTEX_POINT('',#2266); +#2266 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2267 = LINE('',#2268,#2269); +#2268 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2269 = VECTOR('',#2270,1.); +#2270 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#2271 = ORIENTED_EDGE('',*,*,#2272,.T.); +#2272 = EDGE_CURVE('',#2265,#2273,#2275,.T.); +#2273 = VERTEX_POINT('',#2274); +#2274 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2275 = LINE('',#2276,#2277); +#2276 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2277 = VECTOR('',#2278,1.); +#2278 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2279 = ORIENTED_EDGE('',*,*,#2280,.T.); +#2280 = EDGE_CURVE('',#2273,#2127,#2281,.T.); +#2281 = LINE('',#2282,#2283); +#2282 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2283 = VECTOR('',#2284,1.); +#2284 = DIRECTION('',(0.,0.,1.)); +#2285 = ORIENTED_EDGE('',*,*,#2134,.T.); +#2286 = ORIENTED_EDGE('',*,*,#1535,.F.); +#2287 = ORIENTED_EDGE('',*,*,#1924,.F.); +#2288 = ORIENTED_EDGE('',*,*,#2289,.T.); +#2289 = EDGE_CURVE('',#1917,#2290,#2292,.T.); +#2290 = VERTEX_POINT('',#2291); +#2291 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#2292 = LINE('',#2293,#2294); +#2293 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#2294 = VECTOR('',#2295,1.); +#2295 = DIRECTION('',(0.,0.,1.)); +#2296 = ORIENTED_EDGE('',*,*,#2297,.F.); +#2297 = EDGE_CURVE('',#2298,#2290,#2300,.T.); +#2298 = VERTEX_POINT('',#2299); +#2299 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#2300 = LINE('',#2301,#2302); +#2301 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#2302 = VECTOR('',#2303,1.); +#2303 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2304 = ORIENTED_EDGE('',*,*,#2305,.F.); +#2305 = EDGE_CURVE('',#2306,#2298,#2308,.T.); +#2306 = VERTEX_POINT('',#2307); +#2307 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#2308 = LINE('',#2309,#2310); +#2309 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#2310 = VECTOR('',#2311,1.); +#2311 = DIRECTION('',(0.,0.,1.)); +#2312 = ORIENTED_EDGE('',*,*,#2313,.F.); +#2313 = EDGE_CURVE('',#2314,#2306,#2316,.T.); +#2314 = VERTEX_POINT('',#2315); +#2315 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#2316 = LINE('',#2317,#2318); +#2317 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2318 = VECTOR('',#2319,1.); +#2319 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2320 = ORIENTED_EDGE('',*,*,#2321,.T.); +#2321 = EDGE_CURVE('',#2314,#2322,#2324,.T.); +#2322 = VERTEX_POINT('',#2323); +#2323 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#2324 = LINE('',#2325,#2326); +#2325 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#2326 = VECTOR('',#2327,1.); +#2327 = DIRECTION('',(0.,0.,1.)); +#2328 = ORIENTED_EDGE('',*,*,#2329,.F.); +#2329 = EDGE_CURVE('',#2330,#2322,#2332,.T.); +#2330 = VERTEX_POINT('',#2331); +#2331 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#2332 = LINE('',#2333,#2334); +#2333 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#2334 = VECTOR('',#2335,1.); +#2335 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2336 = ORIENTED_EDGE('',*,*,#2337,.F.); +#2337 = EDGE_CURVE('',#2338,#2330,#2340,.T.); +#2338 = VERTEX_POINT('',#2339); +#2339 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#2340 = LINE('',#2341,#2342); +#2341 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#2342 = VECTOR('',#2343,1.); +#2343 = DIRECTION('',(0.,0.,1.)); +#2344 = ORIENTED_EDGE('',*,*,#2345,.F.); +#2345 = EDGE_CURVE('',#2346,#2338,#2348,.T.); +#2346 = VERTEX_POINT('',#2347); +#2347 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#2348 = LINE('',#2349,#2350); +#2349 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2350 = VECTOR('',#2351,1.); +#2351 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2352 = ORIENTED_EDGE('',*,*,#2353,.T.); +#2353 = EDGE_CURVE('',#2346,#2354,#2356,.T.); +#2354 = VERTEX_POINT('',#2355); +#2355 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#2356 = LINE('',#2357,#2358); +#2357 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#2358 = VECTOR('',#2359,1.); +#2359 = DIRECTION('',(0.,0.,1.)); +#2360 = ORIENTED_EDGE('',*,*,#2361,.F.); +#2361 = EDGE_CURVE('',#2362,#2354,#2364,.T.); +#2362 = VERTEX_POINT('',#2363); +#2363 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#2364 = LINE('',#2365,#2366); +#2365 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#2366 = VECTOR('',#2367,1.); +#2367 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2368 = ORIENTED_EDGE('',*,*,#2369,.F.); +#2369 = EDGE_CURVE('',#2150,#2362,#2370,.T.); +#2370 = LINE('',#2371,#2372); +#2371 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#2372 = VECTOR('',#2373,1.); +#2373 = DIRECTION('',(0.,0.,1.)); +#2374 = PLANE('',#2375); +#2375 = AXIS2_PLACEMENT_3D('',#2376,#2377,#2378); +#2376 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2377 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2378 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2379 = ADVANCED_FACE('',(#2380),#2398,.F.); +#2380 = FACE_BOUND('',#2381,.F.); +#2381 = EDGE_LOOP('',(#2382,#2383,#2391,#2397)); +#2382 = ORIENTED_EDGE('',*,*,#1882,.T.); +#2383 = ORIENTED_EDGE('',*,*,#2384,.T.); +#2384 = EDGE_CURVE('',#1875,#2385,#2387,.T.); +#2385 = VERTEX_POINT('',#2386); +#2386 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#2387 = LINE('',#2388,#2389); +#2388 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#2389 = VECTOR('',#2390,1.); +#2390 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2391 = ORIENTED_EDGE('',*,*,#2392,.F.); +#2392 = EDGE_CURVE('',#1593,#2385,#2393,.T.); +#2393 = LINE('',#2394,#2395); +#2394 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#2395 = VECTOR('',#2396,1.); +#2396 = DIRECTION('',(0.,0.,-1.)); +#2397 = ORIENTED_EDGE('',*,*,#1600,.F.); +#2398 = PLANE('',#2399); +#2399 = AXIS2_PLACEMENT_3D('',#2400,#2401,#2402); +#2400 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#2401 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2402 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2403 = ADVANCED_FACE('',(#2404),#2431,.T.); +#2404 = FACE_BOUND('',#2405,.T.); +#2405 = EDGE_LOOP('',(#2406,#2407,#2415,#2423,#2429,#2430)); +#2406 = ORIENTED_EDGE('',*,*,#2289,.T.); +#2407 = ORIENTED_EDGE('',*,*,#2408,.T.); +#2408 = EDGE_CURVE('',#2290,#2409,#2411,.T.); +#2409 = VERTEX_POINT('',#2410); +#2410 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#2411 = LINE('',#2412,#2413); +#2412 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#2413 = VECTOR('',#2414,1.); +#2414 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2415 = ORIENTED_EDGE('',*,*,#2416,.T.); +#2416 = EDGE_CURVE('',#2409,#2417,#2419,.T.); +#2417 = VERTEX_POINT('',#2418); +#2418 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#2419 = LINE('',#2420,#2421); +#2420 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#2421 = VECTOR('',#2422,1.); +#2422 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2423 = ORIENTED_EDGE('',*,*,#2424,.T.); +#2424 = EDGE_CURVE('',#2417,#1713,#2425,.T.); +#2425 = LINE('',#2426,#2427); +#2426 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#2427 = VECTOR('',#2428,1.); +#2428 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2429 = ORIENTED_EDGE('',*,*,#1720,.T.); +#2430 = ORIENTED_EDGE('',*,*,#1916,.T.); +#2431 = PLANE('',#2432); +#2432 = AXIS2_PLACEMENT_3D('',#2433,#2434,#2435); +#2433 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#2434 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2435 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2436 = ADVANCED_FACE('',(#2437),#2455,.F.); +#2437 = FACE_BOUND('',#2438,.F.); +#2438 = EDGE_LOOP('',(#2439,#2447,#2448,#2449)); +#2439 = ORIENTED_EDGE('',*,*,#2440,.T.); +#2440 = EDGE_CURVE('',#2441,#2417,#2443,.T.); +#2441 = VERTEX_POINT('',#2442); +#2442 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2443 = LINE('',#2444,#2445); +#2444 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2445 = VECTOR('',#2446,1.); +#2446 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2447 = ORIENTED_EDGE('',*,*,#2424,.T.); +#2448 = ORIENTED_EDGE('',*,*,#1712,.F.); +#2449 = ORIENTED_EDGE('',*,*,#2450,.F.); +#2450 = EDGE_CURVE('',#2441,#1705,#2451,.T.); +#2451 = LINE('',#2452,#2453); +#2452 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2453 = VECTOR('',#2454,1.); +#2454 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2455 = PLANE('',#2456); +#2456 = AXIS2_PLACEMENT_3D('',#2457,#2458,#2459); +#2457 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2458 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#2459 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2460 = ADVANCED_FACE('',(#2461),#2486,.F.); +#2461 = FACE_BOUND('',#2462,.F.); +#2462 = EDGE_LOOP('',(#2463,#2464,#2472,#2478,#2479,#2480)); +#2463 = ORIENTED_EDGE('',*,*,#2305,.T.); +#2464 = ORIENTED_EDGE('',*,*,#2465,.T.); +#2465 = EDGE_CURVE('',#2298,#2466,#2468,.T.); +#2466 = VERTEX_POINT('',#2467); +#2467 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#2468 = LINE('',#2469,#2470); +#2469 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#2470 = VECTOR('',#2471,1.); +#2471 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2472 = ORIENTED_EDGE('',*,*,#2473,.T.); +#2473 = EDGE_CURVE('',#2466,#2441,#2474,.T.); +#2474 = LINE('',#2475,#2476); +#2475 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#2476 = VECTOR('',#2477,1.); +#2477 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2478 = ORIENTED_EDGE('',*,*,#2450,.T.); +#2479 = ORIENTED_EDGE('',*,*,#1704,.T.); +#2480 = ORIENTED_EDGE('',*,*,#2481,.T.); +#2481 = EDGE_CURVE('',#1697,#2306,#2482,.T.); +#2482 = LINE('',#2483,#2484); +#2483 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#2484 = VECTOR('',#2485,1.); +#2485 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2486 = PLANE('',#2487); +#2487 = AXIS2_PLACEMENT_3D('',#2488,#2489,#2490); +#2488 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#2489 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2490 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2491 = ADVANCED_FACE('',(#2492),#2503,.F.); +#2492 = FACE_BOUND('',#2493,.F.); +#2493 = EDGE_LOOP('',(#2494,#2495,#2496,#2502)); +#2494 = ORIENTED_EDGE('',*,*,#2481,.F.); +#2495 = ORIENTED_EDGE('',*,*,#1696,.T.); +#2496 = ORIENTED_EDGE('',*,*,#2497,.T.); +#2497 = EDGE_CURVE('',#1689,#2314,#2498,.T.); +#2498 = LINE('',#2499,#2500); +#2499 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#2500 = VECTOR('',#2501,1.); +#2501 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2502 = ORIENTED_EDGE('',*,*,#2313,.T.); +#2503 = PLANE('',#2504); +#2504 = AXIS2_PLACEMENT_3D('',#2505,#2506,#2507); +#2505 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#2506 = DIRECTION('',(0.,0.,1.)); +#2507 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2508 = ADVANCED_FACE('',(#2509),#2536,.T.); +#2509 = FACE_BOUND('',#2510,.T.); +#2510 = EDGE_LOOP('',(#2511,#2512,#2520,#2528,#2534,#2535)); +#2511 = ORIENTED_EDGE('',*,*,#2321,.T.); +#2512 = ORIENTED_EDGE('',*,*,#2513,.T.); +#2513 = EDGE_CURVE('',#2322,#2514,#2516,.T.); +#2514 = VERTEX_POINT('',#2515); +#2515 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#2516 = LINE('',#2517,#2518); +#2517 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#2518 = VECTOR('',#2519,1.); +#2519 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2520 = ORIENTED_EDGE('',*,*,#2521,.T.); +#2521 = EDGE_CURVE('',#2514,#2522,#2524,.T.); +#2522 = VERTEX_POINT('',#2523); +#2523 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#2524 = LINE('',#2525,#2526); +#2525 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#2526 = VECTOR('',#2527,1.); +#2527 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2528 = ORIENTED_EDGE('',*,*,#2529,.T.); +#2529 = EDGE_CURVE('',#2522,#1681,#2530,.T.); +#2530 = LINE('',#2531,#2532); +#2531 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#2532 = VECTOR('',#2533,1.); +#2533 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2534 = ORIENTED_EDGE('',*,*,#1688,.T.); +#2535 = ORIENTED_EDGE('',*,*,#2497,.T.); +#2536 = PLANE('',#2537); +#2537 = AXIS2_PLACEMENT_3D('',#2538,#2539,#2540); +#2538 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#2539 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2540 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2541 = ADVANCED_FACE('',(#2542),#2560,.F.); +#2542 = FACE_BOUND('',#2543,.F.); +#2543 = EDGE_LOOP('',(#2544,#2552,#2553,#2554)); +#2544 = ORIENTED_EDGE('',*,*,#2545,.T.); +#2545 = EDGE_CURVE('',#2546,#2522,#2548,.T.); +#2546 = VERTEX_POINT('',#2547); +#2547 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2548 = LINE('',#2549,#2550); +#2549 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2550 = VECTOR('',#2551,1.); +#2551 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2552 = ORIENTED_EDGE('',*,*,#2529,.T.); +#2553 = ORIENTED_EDGE('',*,*,#1680,.F.); +#2554 = ORIENTED_EDGE('',*,*,#2555,.F.); +#2555 = EDGE_CURVE('',#2546,#1673,#2556,.T.); +#2556 = LINE('',#2557,#2558); +#2557 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2558 = VECTOR('',#2559,1.); +#2559 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2560 = PLANE('',#2561); +#2561 = AXIS2_PLACEMENT_3D('',#2562,#2563,#2564); +#2562 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2563 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#2564 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2565 = ADVANCED_FACE('',(#2566),#2591,.F.); +#2566 = FACE_BOUND('',#2567,.F.); +#2567 = EDGE_LOOP('',(#2568,#2569,#2577,#2583,#2584,#2585)); +#2568 = ORIENTED_EDGE('',*,*,#2337,.T.); +#2569 = ORIENTED_EDGE('',*,*,#2570,.T.); +#2570 = EDGE_CURVE('',#2330,#2571,#2573,.T.); +#2571 = VERTEX_POINT('',#2572); +#2572 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#2573 = LINE('',#2574,#2575); +#2574 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#2575 = VECTOR('',#2576,1.); +#2576 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2577 = ORIENTED_EDGE('',*,*,#2578,.T.); +#2578 = EDGE_CURVE('',#2571,#2546,#2579,.T.); +#2579 = LINE('',#2580,#2581); +#2580 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#2581 = VECTOR('',#2582,1.); +#2582 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2583 = ORIENTED_EDGE('',*,*,#2555,.T.); +#2584 = ORIENTED_EDGE('',*,*,#1672,.T.); +#2585 = ORIENTED_EDGE('',*,*,#2586,.T.); +#2586 = EDGE_CURVE('',#1665,#2338,#2587,.T.); +#2587 = LINE('',#2588,#2589); +#2588 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#2589 = VECTOR('',#2590,1.); +#2590 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2591 = PLANE('',#2592); +#2592 = AXIS2_PLACEMENT_3D('',#2593,#2594,#2595); +#2593 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#2594 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2595 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2596 = ADVANCED_FACE('',(#2597),#2608,.F.); +#2597 = FACE_BOUND('',#2598,.F.); +#2598 = EDGE_LOOP('',(#2599,#2600,#2606,#2607)); +#2599 = ORIENTED_EDGE('',*,*,#1664,.T.); +#2600 = ORIENTED_EDGE('',*,*,#2601,.T.); +#2601 = EDGE_CURVE('',#1657,#2346,#2602,.T.); +#2602 = LINE('',#2603,#2604); +#2603 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#2604 = VECTOR('',#2605,1.); +#2605 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2606 = ORIENTED_EDGE('',*,*,#2345,.T.); +#2607 = ORIENTED_EDGE('',*,*,#2586,.F.); +#2608 = PLANE('',#2609); +#2609 = AXIS2_PLACEMENT_3D('',#2610,#2611,#2612); +#2610 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#2611 = DIRECTION('',(0.,0.,1.)); +#2612 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2613 = ADVANCED_FACE('',(#2614),#2641,.T.); +#2614 = FACE_BOUND('',#2615,.T.); +#2615 = EDGE_LOOP('',(#2616,#2617,#2625,#2633,#2639,#2640)); +#2616 = ORIENTED_EDGE('',*,*,#2353,.T.); +#2617 = ORIENTED_EDGE('',*,*,#2618,.T.); +#2618 = EDGE_CURVE('',#2354,#2619,#2621,.T.); +#2619 = VERTEX_POINT('',#2620); +#2620 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#2621 = LINE('',#2622,#2623); +#2622 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#2623 = VECTOR('',#2624,1.); +#2624 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2625 = ORIENTED_EDGE('',*,*,#2626,.T.); +#2626 = EDGE_CURVE('',#2619,#2627,#2629,.T.); +#2627 = VERTEX_POINT('',#2628); +#2628 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#2629 = LINE('',#2630,#2631); +#2630 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#2631 = VECTOR('',#2632,1.); +#2632 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2633 = ORIENTED_EDGE('',*,*,#2634,.T.); +#2634 = EDGE_CURVE('',#2627,#1649,#2635,.T.); +#2635 = LINE('',#2636,#2637); +#2636 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#2637 = VECTOR('',#2638,1.); +#2638 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2639 = ORIENTED_EDGE('',*,*,#1656,.T.); +#2640 = ORIENTED_EDGE('',*,*,#2601,.T.); +#2641 = PLANE('',#2642); +#2642 = AXIS2_PLACEMENT_3D('',#2643,#2644,#2645); +#2643 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#2644 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2645 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2646 = ADVANCED_FACE('',(#2647),#2665,.F.); +#2647 = FACE_BOUND('',#2648,.F.); +#2648 = EDGE_LOOP('',(#2649,#2657,#2658,#2659)); +#2649 = ORIENTED_EDGE('',*,*,#2650,.T.); +#2650 = EDGE_CURVE('',#2651,#2627,#2653,.T.); +#2651 = VERTEX_POINT('',#2652); +#2652 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2653 = LINE('',#2654,#2655); +#2654 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2655 = VECTOR('',#2656,1.); +#2656 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2657 = ORIENTED_EDGE('',*,*,#2634,.T.); +#2658 = ORIENTED_EDGE('',*,*,#1648,.F.); +#2659 = ORIENTED_EDGE('',*,*,#2660,.F.); +#2660 = EDGE_CURVE('',#2651,#1641,#2661,.T.); +#2661 = LINE('',#2662,#2663); +#2662 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2663 = VECTOR('',#2664,1.); +#2664 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2665 = PLANE('',#2666); +#2666 = AXIS2_PLACEMENT_3D('',#2667,#2668,#2669); +#2667 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2668 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#2669 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2670 = ADVANCED_FACE('',(#2671),#2696,.F.); +#2671 = FACE_BOUND('',#2672,.F.); +#2672 = EDGE_LOOP('',(#2673,#2674,#2682,#2688,#2689,#2690)); +#2673 = ORIENTED_EDGE('',*,*,#2369,.T.); +#2674 = ORIENTED_EDGE('',*,*,#2675,.T.); +#2675 = EDGE_CURVE('',#2362,#2676,#2678,.T.); +#2676 = VERTEX_POINT('',#2677); +#2677 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#2678 = LINE('',#2679,#2680); +#2679 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#2680 = VECTOR('',#2681,1.); +#2681 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2682 = ORIENTED_EDGE('',*,*,#2683,.T.); +#2683 = EDGE_CURVE('',#2676,#2651,#2684,.T.); +#2684 = LINE('',#2685,#2686); +#2685 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#2686 = VECTOR('',#2687,1.); +#2687 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2688 = ORIENTED_EDGE('',*,*,#2660,.T.); +#2689 = ORIENTED_EDGE('',*,*,#1640,.T.); +#2690 = ORIENTED_EDGE('',*,*,#2691,.T.); +#2691 = EDGE_CURVE('',#1633,#2150,#2692,.T.); +#2692 = LINE('',#2693,#2694); +#2693 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#2694 = VECTOR('',#2695,1.); +#2695 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2696 = PLANE('',#2697); +#2697 = AXIS2_PLACEMENT_3D('',#2698,#2699,#2700); +#2698 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#2699 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2700 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2701 = ADVANCED_FACE('',(#2702),#2708,.F.); +#2702 = FACE_BOUND('',#2703,.F.); +#2703 = EDGE_LOOP('',(#2704,#2705,#2706,#2707)); +#2704 = ORIENTED_EDGE('',*,*,#1758,.T.); +#2705 = ORIENTED_EDGE('',*,*,#2149,.T.); +#2706 = ORIENTED_EDGE('',*,*,#2691,.F.); +#2707 = ORIENTED_EDGE('',*,*,#1632,.T.); +#2708 = PLANE('',#2709); +#2709 = AXIS2_PLACEMENT_3D('',#2710,#2711,#2712); +#2710 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#2711 = DIRECTION('',(0.,0.,1.)); +#2712 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2713 = ADVANCED_FACE('',(#2714),#2741,.F.); +#2714 = FACE_BOUND('',#2715,.F.); +#2715 = EDGE_LOOP('',(#2716,#2717,#2718,#2719,#2725,#2726,#2735)); +#2716 = ORIENTED_EDGE('',*,*,#1833,.T.); +#2717 = ORIENTED_EDGE('',*,*,#1744,.F.); +#2718 = ORIENTED_EDGE('',*,*,#2392,.T.); +#2719 = ORIENTED_EDGE('',*,*,#2720,.T.); +#2720 = EDGE_CURVE('',#2385,#2096,#2721,.T.); +#2721 = LINE('',#2722,#2723); +#2722 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#2723 = VECTOR('',#2724,1.); +#2724 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2725 = ORIENTED_EDGE('',*,*,#2103,.F.); +#2726 = ORIENTED_EDGE('',*,*,#2727,.F.); +#2727 = EDGE_CURVE('',#2728,#2104,#2730,.T.); +#2728 = VERTEX_POINT('',#2729); +#2729 = CARTESIAN_POINT('',(6.6,1.,3.65)); +#2730 = CIRCLE('',#2731,0.5); +#2731 = AXIS2_PLACEMENT_3D('',#2732,#2733,#2734); +#2732 = CARTESIAN_POINT('',(6.6,1.,4.15)); +#2733 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2734 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2735 = ORIENTED_EDGE('',*,*,#2736,.T.); +#2736 = EDGE_CURVE('',#2728,#1826,#2737,.T.); +#2737 = LINE('',#2738,#2739); +#2738 = CARTESIAN_POINT('',(6.6,-0.825,3.65)); +#2739 = VECTOR('',#2740,1.); +#2740 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2741 = PLANE('',#2742); +#2742 = AXIS2_PLACEMENT_3D('',#2743,#2744,#2745); +#2743 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#2744 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2745 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2746 = ADVANCED_FACE('',(#2747),#2758,.T.); +#2747 = FACE_BOUND('',#2748,.T.); +#2748 = EDGE_LOOP('',(#2749,#2750,#2751,#2752)); +#2749 = ORIENTED_EDGE('',*,*,#1956,.F.); +#2750 = ORIENTED_EDGE('',*,*,#1801,.T.); +#2751 = ORIENTED_EDGE('',*,*,#2158,.T.); +#2752 = ORIENTED_EDGE('',*,*,#2753,.T.); +#2753 = EDGE_CURVE('',#2159,#1957,#2754,.T.); +#2754 = LINE('',#2755,#2756); +#2755 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#2756 = VECTOR('',#2757,1.); +#2757 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2758 = PLANE('',#2759); +#2759 = AXIS2_PLACEMENT_3D('',#2760,#2761,#2762); +#2760 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#2761 = DIRECTION('',(0.,0.,1.)); +#2762 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2763 = ADVANCED_FACE('',(#2764),#2775,.F.); +#2764 = FACE_BOUND('',#2765,.F.); +#2765 = EDGE_LOOP('',(#2766,#2772,#2773,#2774)); +#2766 = ORIENTED_EDGE('',*,*,#2767,.T.); +#2767 = EDGE_CURVE('',#1777,#2728,#2768,.T.); +#2768 = LINE('',#2769,#2770); +#2769 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#2770 = VECTOR('',#2771,1.); +#2771 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2772 = ORIENTED_EDGE('',*,*,#2727,.T.); +#2773 = ORIENTED_EDGE('',*,*,#2111,.F.); +#2774 = ORIENTED_EDGE('',*,*,#1784,.T.); +#2775 = CYLINDRICAL_SURFACE('',#2776,0.5); +#2776 = AXIS2_PLACEMENT_3D('',#2777,#2778,#2779); +#2777 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#2778 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#2779 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2780 = ADVANCED_FACE('',(#2781),#2787,.T.); +#2781 = FACE_BOUND('',#2782,.T.); +#2782 = EDGE_LOOP('',(#2783,#2784,#2785,#2786)); +#2783 = ORIENTED_EDGE('',*,*,#1776,.F.); +#2784 = ORIENTED_EDGE('',*,*,#2767,.T.); +#2785 = ORIENTED_EDGE('',*,*,#2736,.T.); +#2786 = ORIENTED_EDGE('',*,*,#1825,.F.); +#2787 = PLANE('',#2788); +#2788 = AXIS2_PLACEMENT_3D('',#2789,#2790,#2791); +#2789 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#2790 = DIRECTION('',(0.,0.,1.)); +#2791 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2792 = ADVANCED_FACE('',(#2793,#2799,#2833,#2867),#2901,.T.); +#2793 = FACE_BOUND('',#2794,.T.); +#2794 = EDGE_LOOP('',(#2795,#2796,#2797,#2798)); +#2795 = ORIENTED_EDGE('',*,*,#2095,.T.); +#2796 = ORIENTED_EDGE('',*,*,#1874,.T.); +#2797 = ORIENTED_EDGE('',*,*,#2384,.T.); +#2798 = ORIENTED_EDGE('',*,*,#2720,.T.); +#2799 = FACE_BOUND('',#2800,.T.); +#2800 = EDGE_LOOP('',(#2801,#2811,#2819,#2827)); +#2801 = ORIENTED_EDGE('',*,*,#2802,.F.); +#2802 = EDGE_CURVE('',#2803,#2805,#2807,.T.); +#2803 = VERTEX_POINT('',#2804); +#2804 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#2805 = VERTEX_POINT('',#2806); +#2806 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#2807 = LINE('',#2808,#2809); +#2808 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#2809 = VECTOR('',#2810,1.); +#2810 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2811 = ORIENTED_EDGE('',*,*,#2812,.T.); +#2812 = EDGE_CURVE('',#2803,#2813,#2815,.T.); +#2813 = VERTEX_POINT('',#2814); +#2814 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#2815 = LINE('',#2816,#2817); +#2816 = CARTESIAN_POINT('',(1.41,0.32,1.85)); +#2817 = VECTOR('',#2818,1.); +#2818 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#2819 = ORIENTED_EDGE('',*,*,#2820,.T.); +#2820 = EDGE_CURVE('',#2813,#2821,#2823,.T.); +#2821 = VERTEX_POINT('',#2822); +#2822 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#2823 = LINE('',#2824,#2825); +#2824 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#2825 = VECTOR('',#2826,1.); +#2826 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2827 = ORIENTED_EDGE('',*,*,#2828,.T.); +#2828 = EDGE_CURVE('',#2821,#2805,#2829,.T.); +#2829 = LINE('',#2830,#2831); +#2830 = CARTESIAN_POINT('',(1.41,-0.32,1.85)); +#2831 = VECTOR('',#2832,1.); +#2832 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2833 = FACE_BOUND('',#2834,.T.); +#2834 = EDGE_LOOP('',(#2835,#2845,#2853,#2861)); +#2835 = ORIENTED_EDGE('',*,*,#2836,.F.); +#2836 = EDGE_CURVE('',#2837,#2839,#2841,.T.); +#2837 = VERTEX_POINT('',#2838); +#2838 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#2839 = VERTEX_POINT('',#2840); +#2840 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#2841 = LINE('',#2842,#2843); +#2842 = CARTESIAN_POINT('',(4.68,-0.26920299558,1.85)); +#2843 = VECTOR('',#2844,1.); +#2844 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2845 = ORIENTED_EDGE('',*,*,#2846,.T.); +#2846 = EDGE_CURVE('',#2837,#2847,#2849,.T.); +#2847 = VERTEX_POINT('',#2848); +#2848 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#2849 = LINE('',#2850,#2851); +#2850 = CARTESIAN_POINT('',(3.91,0.32,1.85)); +#2851 = VECTOR('',#2852,1.); +#2852 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#2853 = ORIENTED_EDGE('',*,*,#2854,.T.); +#2854 = EDGE_CURVE('',#2847,#2855,#2857,.T.); +#2855 = VERTEX_POINT('',#2856); +#2856 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#2857 = LINE('',#2858,#2859); +#2858 = CARTESIAN_POINT('',(5.32,-0.26920299558,1.85)); +#2859 = VECTOR('',#2860,1.); +#2860 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2861 = ORIENTED_EDGE('',*,*,#2862,.T.); +#2862 = EDGE_CURVE('',#2855,#2839,#2863,.T.); +#2863 = LINE('',#2864,#2865); +#2864 = CARTESIAN_POINT('',(3.91,-0.32,1.85)); +#2865 = VECTOR('',#2866,1.); +#2866 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2867 = FACE_BOUND('',#2868,.T.); +#2868 = EDGE_LOOP('',(#2869,#2879,#2887,#2895)); +#2869 = ORIENTED_EDGE('',*,*,#2870,.F.); +#2870 = EDGE_CURVE('',#2871,#2873,#2875,.T.); +#2871 = VERTEX_POINT('',#2872); +#2872 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#2873 = VERTEX_POINT('',#2874); +#2874 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#2875 = LINE('',#2876,#2877); +#2876 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#2877 = VECTOR('',#2878,1.); +#2878 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2879 = ORIENTED_EDGE('',*,*,#2880,.T.); +#2880 = EDGE_CURVE('',#2871,#2881,#2883,.T.); +#2881 = VERTEX_POINT('',#2882); +#2882 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#2883 = LINE('',#2884,#2885); +#2884 = CARTESIAN_POINT('',(2.66,0.32,1.85)); +#2885 = VECTOR('',#2886,1.); +#2886 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#2887 = ORIENTED_EDGE('',*,*,#2888,.T.); +#2888 = EDGE_CURVE('',#2881,#2889,#2891,.T.); +#2889 = VERTEX_POINT('',#2890); +#2890 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#2891 = LINE('',#2892,#2893); +#2892 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#2893 = VECTOR('',#2894,1.); +#2894 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2895 = ORIENTED_EDGE('',*,*,#2896,.T.); +#2896 = EDGE_CURVE('',#2889,#2873,#2897,.T.); +#2897 = LINE('',#2898,#2899); +#2898 = CARTESIAN_POINT('',(2.66,-0.32,1.85)); +#2899 = VECTOR('',#2900,1.); +#2900 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2901 = PLANE('',#2902); +#2902 = AXIS2_PLACEMENT_3D('',#2903,#2904,#2905); +#2903 = CARTESIAN_POINT('',(2.5,-0.575,1.85)); +#2904 = DIRECTION('',(7.789680114753E-33,-9.539606818914E-49,1.)); +#2905 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2906 = ADVANCED_FACE('',(#2907),#2918,.F.); +#2907 = FACE_BOUND('',#2908,.F.); +#2908 = EDGE_LOOP('',(#2909,#2910,#2916,#2917)); +#2909 = ORIENTED_EDGE('',*,*,#2280,.F.); +#2910 = ORIENTED_EDGE('',*,*,#2911,.T.); +#2911 = EDGE_CURVE('',#2273,#2071,#2912,.T.); +#2912 = LINE('',#2913,#2914); +#2913 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2914 = VECTOR('',#2915,1.); +#2915 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2916 = ORIENTED_EDGE('',*,*,#2078,.F.); +#2917 = ORIENTED_EDGE('',*,*,#2126,.F.); +#2918 = PLANE('',#2919); +#2919 = AXIS2_PLACEMENT_3D('',#2920,#2921,#2922); +#2920 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2921 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2922 = DIRECTION('',(0.,0.,1.)); +#2923 = ADVANCED_FACE('',(#2924),#2935,.F.); +#2924 = FACE_BOUND('',#2925,.F.); +#2925 = EDGE_LOOP('',(#2926,#2927,#2933,#2934)); +#2926 = ORIENTED_EDGE('',*,*,#2272,.F.); +#2927 = ORIENTED_EDGE('',*,*,#2928,.T.); +#2928 = EDGE_CURVE('',#2265,#2063,#2929,.T.); +#2929 = LINE('',#2930,#2931); +#2930 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2931 = VECTOR('',#2932,1.); +#2932 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2933 = ORIENTED_EDGE('',*,*,#2070,.F.); +#2934 = ORIENTED_EDGE('',*,*,#2911,.F.); +#2935 = PLANE('',#2936); +#2936 = AXIS2_PLACEMENT_3D('',#2937,#2938,#2939); +#2937 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2938 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#2939 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2940 = ADVANCED_FACE('',(#2941),#2952,.F.); +#2941 = FACE_BOUND('',#2942,.F.); +#2942 = EDGE_LOOP('',(#2943,#2944,#2950,#2951)); +#2943 = ORIENTED_EDGE('',*,*,#2264,.F.); +#2944 = ORIENTED_EDGE('',*,*,#2945,.T.); +#2945 = EDGE_CURVE('',#2257,#2055,#2946,.T.); +#2946 = LINE('',#2947,#2948); +#2947 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2948 = VECTOR('',#2949,1.); +#2949 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2950 = ORIENTED_EDGE('',*,*,#2062,.F.); +#2951 = ORIENTED_EDGE('',*,*,#2928,.F.); +#2952 = PLANE('',#2953); +#2953 = AXIS2_PLACEMENT_3D('',#2954,#2955,#2956); +#2954 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2955 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2956 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#2957 = ADVANCED_FACE('',(#2958),#2969,.F.); +#2958 = FACE_BOUND('',#2959,.F.); +#2959 = EDGE_LOOP('',(#2960,#2961,#2967,#2968)); +#2960 = ORIENTED_EDGE('',*,*,#2256,.F.); +#2961 = ORIENTED_EDGE('',*,*,#2962,.T.); +#2962 = EDGE_CURVE('',#2248,#2046,#2963,.T.); +#2963 = LINE('',#2964,#2965); +#2964 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#2965 = VECTOR('',#2966,1.); +#2966 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2967 = ORIENTED_EDGE('',*,*,#2054,.F.); +#2968 = ORIENTED_EDGE('',*,*,#2945,.F.); +#2969 = PLANE('',#2970); +#2970 = AXIS2_PLACEMENT_3D('',#2971,#2972,#2973); +#2971 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#2972 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2973 = DIRECTION('',(0.,0.,1.)); +#2974 = ADVANCED_FACE('',(#2975),#2986,.F.); +#2975 = FACE_BOUND('',#2976,.F.); +#2976 = EDGE_LOOP('',(#2977,#2978,#2979,#2980)); +#2977 = ORIENTED_EDGE('',*,*,#2045,.F.); +#2978 = ORIENTED_EDGE('',*,*,#2962,.F.); +#2979 = ORIENTED_EDGE('',*,*,#2247,.F.); +#2980 = ORIENTED_EDGE('',*,*,#2981,.T.); +#2981 = EDGE_CURVE('',#2240,#2038,#2982,.T.); +#2982 = LINE('',#2983,#2984); +#2983 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#2984 = VECTOR('',#2985,1.); +#2985 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2986 = CYLINDRICAL_SURFACE('',#2987,0.75); +#2987 = AXIS2_PLACEMENT_3D('',#2988,#2989,#2990); +#2988 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#2989 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2990 = DIRECTION('',(-0.,0.,-1.)); +#2991 = ADVANCED_FACE('',(#2992),#3003,.F.); +#2992 = FACE_BOUND('',#2993,.F.); +#2993 = EDGE_LOOP('',(#2994,#2995,#2996,#3002)); +#2994 = ORIENTED_EDGE('',*,*,#2981,.F.); +#2995 = ORIENTED_EDGE('',*,*,#2239,.F.); +#2996 = ORIENTED_EDGE('',*,*,#2997,.T.); +#2997 = EDGE_CURVE('',#2232,#2030,#2998,.T.); +#2998 = LINE('',#2999,#3000); +#2999 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#3000 = VECTOR('',#3001,1.); +#3001 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3002 = ORIENTED_EDGE('',*,*,#2037,.F.); +#3003 = PLANE('',#3004); +#3004 = AXIS2_PLACEMENT_3D('',#3005,#3006,#3007); +#3005 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#3006 = DIRECTION('',(-0.,0.,-1.)); +#3007 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3008 = ADVANCED_FACE('',(#3009),#3020,.F.); +#3009 = FACE_BOUND('',#3010,.F.); +#3010 = EDGE_LOOP('',(#3011,#3012,#3018,#3019)); +#3011 = ORIENTED_EDGE('',*,*,#2231,.F.); +#3012 = ORIENTED_EDGE('',*,*,#3013,.T.); +#3013 = EDGE_CURVE('',#2224,#2022,#3014,.T.); +#3014 = LINE('',#3015,#3016); +#3015 = CARTESIAN_POINT('',(1.,2.35,7.)); +#3016 = VECTOR('',#3017,1.); +#3017 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3018 = ORIENTED_EDGE('',*,*,#2029,.F.); +#3019 = ORIENTED_EDGE('',*,*,#2997,.F.); +#3020 = PLANE('',#3021); +#3021 = AXIS2_PLACEMENT_3D('',#3022,#3023,#3024); +#3022 = CARTESIAN_POINT('',(1.,2.35,7.)); +#3023 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3024 = DIRECTION('',(0.,-0.,-1.)); +#3025 = ADVANCED_FACE('',(#3026),#3037,.T.); +#3026 = FACE_BOUND('',#3027,.T.); +#3027 = EDGE_LOOP('',(#3028,#3029,#3035,#3036)); +#3028 = ORIENTED_EDGE('',*,*,#2021,.F.); +#3029 = ORIENTED_EDGE('',*,*,#3030,.F.); +#3030 = EDGE_CURVE('',#2216,#2014,#3031,.T.); +#3031 = LINE('',#3032,#3033); +#3032 = CARTESIAN_POINT('',(4.,2.35,7.)); +#3033 = VECTOR('',#3034,1.); +#3034 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3035 = ORIENTED_EDGE('',*,*,#2223,.T.); +#3036 = ORIENTED_EDGE('',*,*,#3013,.T.); +#3037 = PLANE('',#3038); +#3038 = AXIS2_PLACEMENT_3D('',#3039,#3040,#3041); +#3039 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#3040 = DIRECTION('',(0.,0.,1.)); +#3041 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3042 = ADVANCED_FACE('',(#3043),#3054,.T.); +#3043 = FACE_BOUND('',#3044,.T.); +#3044 = EDGE_LOOP('',(#3045,#3046,#3047,#3048)); +#3045 = ORIENTED_EDGE('',*,*,#2215,.F.); +#3046 = ORIENTED_EDGE('',*,*,#3030,.T.); +#3047 = ORIENTED_EDGE('',*,*,#2013,.F.); +#3048 = ORIENTED_EDGE('',*,*,#3049,.F.); +#3049 = EDGE_CURVE('',#2208,#2006,#3050,.T.); +#3050 = LINE('',#3051,#3052); +#3051 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#3052 = VECTOR('',#3053,1.); +#3053 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3054 = PLANE('',#3055); +#3055 = AXIS2_PLACEMENT_3D('',#3056,#3057,#3058); +#3056 = CARTESIAN_POINT('',(4.,2.35,7.)); +#3057 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3058 = DIRECTION('',(0.,-0.,-1.)); +#3059 = ADVANCED_FACE('',(#3060),#3071,.T.); +#3060 = FACE_BOUND('',#3061,.T.); +#3061 = EDGE_LOOP('',(#3062,#3068,#3069,#3070)); +#3062 = ORIENTED_EDGE('',*,*,#3063,.F.); +#3063 = EDGE_CURVE('',#2199,#1997,#3064,.T.); +#3064 = LINE('',#3065,#3066); +#3065 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#3066 = VECTOR('',#3067,1.); +#3067 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3068 = ORIENTED_EDGE('',*,*,#2207,.F.); +#3069 = ORIENTED_EDGE('',*,*,#3049,.T.); +#3070 = ORIENTED_EDGE('',*,*,#2005,.F.); +#3071 = PLANE('',#3072); +#3072 = AXIS2_PLACEMENT_3D('',#3073,#3074,#3075); +#3073 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#3074 = DIRECTION('',(0.,0.,1.)); +#3075 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3076 = ADVANCED_FACE('',(#3077),#3088,.F.); +#3077 = FACE_BOUND('',#3078,.F.); +#3078 = EDGE_LOOP('',(#3079,#3080,#3081,#3087)); +#3079 = ORIENTED_EDGE('',*,*,#3063,.F.); +#3080 = ORIENTED_EDGE('',*,*,#2198,.T.); +#3081 = ORIENTED_EDGE('',*,*,#3082,.T.); +#3082 = EDGE_CURVE('',#2191,#1989,#3083,.T.); +#3083 = LINE('',#3084,#3085); +#3084 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#3085 = VECTOR('',#3086,1.); +#3086 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3087 = ORIENTED_EDGE('',*,*,#1996,.F.); +#3088 = CYLINDRICAL_SURFACE('',#3089,0.75); +#3089 = AXIS2_PLACEMENT_3D('',#3090,#3091,#3092); +#3090 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#3091 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3092 = DIRECTION('',(0.,-0.,-1.)); +#3093 = ADVANCED_FACE('',(#3094),#3105,.T.); +#3094 = FACE_BOUND('',#3095,.T.); +#3095 = EDGE_LOOP('',(#3096,#3097,#3098,#3099)); +#3096 = ORIENTED_EDGE('',*,*,#2190,.F.); +#3097 = ORIENTED_EDGE('',*,*,#3082,.T.); +#3098 = ORIENTED_EDGE('',*,*,#1988,.F.); +#3099 = ORIENTED_EDGE('',*,*,#3100,.F.); +#3100 = EDGE_CURVE('',#2183,#1981,#3101,.T.); +#3101 = LINE('',#3102,#3103); +#3102 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#3103 = VECTOR('',#3104,1.); +#3104 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3105 = PLANE('',#3106); +#3106 = AXIS2_PLACEMENT_3D('',#3107,#3108,#3109); +#3107 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#3108 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3109 = DIRECTION('',(0.,0.,1.)); +#3110 = ADVANCED_FACE('',(#3111),#3122,.T.); +#3111 = FACE_BOUND('',#3112,.T.); +#3112 = EDGE_LOOP('',(#3113,#3114,#3115,#3116)); +#3113 = ORIENTED_EDGE('',*,*,#2182,.F.); +#3114 = ORIENTED_EDGE('',*,*,#3100,.T.); +#3115 = ORIENTED_EDGE('',*,*,#1980,.F.); +#3116 = ORIENTED_EDGE('',*,*,#3117,.F.); +#3117 = EDGE_CURVE('',#2175,#1973,#3118,.T.); +#3118 = LINE('',#3119,#3120); +#3119 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#3120 = VECTOR('',#3121,1.); +#3121 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3122 = PLANE('',#3123); +#3123 = AXIS2_PLACEMENT_3D('',#3124,#3125,#3126); +#3124 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#3125 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#3126 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#3127 = ADVANCED_FACE('',(#3128),#3139,.T.); +#3128 = FACE_BOUND('',#3129,.T.); +#3129 = EDGE_LOOP('',(#3130,#3131,#3132,#3133)); +#3130 = ORIENTED_EDGE('',*,*,#2174,.F.); +#3131 = ORIENTED_EDGE('',*,*,#3117,.T.); +#3132 = ORIENTED_EDGE('',*,*,#1972,.F.); +#3133 = ORIENTED_EDGE('',*,*,#3134,.F.); +#3134 = EDGE_CURVE('',#2167,#1965,#3135,.T.); +#3135 = LINE('',#3136,#3137); +#3136 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#3137 = VECTOR('',#3138,1.); +#3138 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3139 = PLANE('',#3140); +#3140 = AXIS2_PLACEMENT_3D('',#3141,#3142,#3143); +#3141 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#3142 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#3143 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#3144 = ADVANCED_FACE('',(#3145),#3151,.T.); +#3145 = FACE_BOUND('',#3146,.T.); +#3146 = EDGE_LOOP('',(#3147,#3148,#3149,#3150)); +#3147 = ORIENTED_EDGE('',*,*,#2166,.F.); +#3148 = ORIENTED_EDGE('',*,*,#3134,.T.); +#3149 = ORIENTED_EDGE('',*,*,#1964,.F.); +#3150 = ORIENTED_EDGE('',*,*,#2753,.F.); +#3151 = PLANE('',#3152); +#3152 = AXIS2_PLACEMENT_3D('',#3153,#3154,#3155); +#3153 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#3154 = DIRECTION('',(-1.,1.224646799147E-16,4.93432455389E-16)); +#3155 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#3156 = ADVANCED_FACE('',(#3157),#3168,.F.); +#3157 = FACE_BOUND('',#3158,.F.); +#3158 = EDGE_LOOP('',(#3159,#3160,#3161,#3167)); +#3159 = ORIENTED_EDGE('',*,*,#2361,.T.); +#3160 = ORIENTED_EDGE('',*,*,#2618,.T.); +#3161 = ORIENTED_EDGE('',*,*,#3162,.F.); +#3162 = EDGE_CURVE('',#2676,#2619,#3163,.T.); +#3163 = LINE('',#3164,#3165); +#3164 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#3165 = VECTOR('',#3166,1.); +#3166 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3167 = ORIENTED_EDGE('',*,*,#2675,.F.); +#3168 = PLANE('',#3169); +#3169 = AXIS2_PLACEMENT_3D('',#3170,#3171,#3172); +#3170 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#3171 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#3172 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#3173 = ADVANCED_FACE('',(#3174),#3185,.F.); +#3174 = FACE_BOUND('',#3175,.F.); +#3175 = EDGE_LOOP('',(#3176,#3177,#3178,#3184)); +#3176 = ORIENTED_EDGE('',*,*,#2329,.T.); +#3177 = ORIENTED_EDGE('',*,*,#2513,.T.); +#3178 = ORIENTED_EDGE('',*,*,#3179,.F.); +#3179 = EDGE_CURVE('',#2571,#2514,#3180,.T.); +#3180 = LINE('',#3181,#3182); +#3181 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#3182 = VECTOR('',#3183,1.); +#3183 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3184 = ORIENTED_EDGE('',*,*,#2570,.F.); +#3185 = PLANE('',#3186); +#3186 = AXIS2_PLACEMENT_3D('',#3187,#3188,#3189); +#3187 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#3188 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#3189 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#3190 = ADVANCED_FACE('',(#3191),#3202,.F.); +#3191 = FACE_BOUND('',#3192,.F.); +#3192 = EDGE_LOOP('',(#3193,#3194,#3195,#3201)); +#3193 = ORIENTED_EDGE('',*,*,#2297,.T.); +#3194 = ORIENTED_EDGE('',*,*,#2408,.T.); +#3195 = ORIENTED_EDGE('',*,*,#3196,.F.); +#3196 = EDGE_CURVE('',#2466,#2409,#3197,.T.); +#3197 = LINE('',#3198,#3199); +#3198 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#3199 = VECTOR('',#3200,1.); +#3200 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3201 = ORIENTED_EDGE('',*,*,#2465,.F.); +#3202 = PLANE('',#3203); +#3203 = AXIS2_PLACEMENT_3D('',#3204,#3205,#3206); +#3204 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#3205 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#3206 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#3207 = ADVANCED_FACE('',(#3208,#3214),#3248,.F.); +#3208 = FACE_BOUND('',#3209,.F.); +#3209 = EDGE_LOOP('',(#3210,#3211,#3212,#3213)); +#3210 = ORIENTED_EDGE('',*,*,#3196,.T.); +#3211 = ORIENTED_EDGE('',*,*,#2416,.T.); +#3212 = ORIENTED_EDGE('',*,*,#2440,.F.); +#3213 = ORIENTED_EDGE('',*,*,#2473,.F.); +#3214 = FACE_BOUND('',#3215,.F.); +#3215 = EDGE_LOOP('',(#3216,#3226,#3234,#3242)); +#3216 = ORIENTED_EDGE('',*,*,#3217,.F.); +#3217 = EDGE_CURVE('',#3218,#3220,#3222,.T.); +#3218 = VERTEX_POINT('',#3219); +#3219 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#3220 = VERTEX_POINT('',#3221); +#3221 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#3222 = LINE('',#3223,#3224); +#3223 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#3224 = VECTOR('',#3225,1.); +#3225 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3226 = ORIENTED_EDGE('',*,*,#3227,.T.); +#3227 = EDGE_CURVE('',#3218,#3228,#3230,.T.); +#3228 = VERTEX_POINT('',#3229); +#3229 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#3230 = LINE('',#3231,#3232); +#3231 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#3232 = VECTOR('',#3233,1.); +#3233 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3234 = ORIENTED_EDGE('',*,*,#3235,.T.); +#3235 = EDGE_CURVE('',#3228,#3236,#3238,.T.); +#3236 = VERTEX_POINT('',#3237); +#3237 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#3238 = LINE('',#3239,#3240); +#3239 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#3240 = VECTOR('',#3241,1.); +#3241 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3242 = ORIENTED_EDGE('',*,*,#3243,.T.); +#3243 = EDGE_CURVE('',#3236,#3220,#3244,.T.); +#3244 = LINE('',#3245,#3246); +#3245 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#3246 = VECTOR('',#3247,1.); +#3247 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3248 = PLANE('',#3249); +#3249 = AXIS2_PLACEMENT_3D('',#3250,#3251,#3252); +#3250 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#3251 = DIRECTION('',(0.,0.,1.)); +#3252 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3253 = ADVANCED_FACE('',(#3254,#3260),#3294,.F.); +#3254 = FACE_BOUND('',#3255,.F.); +#3255 = EDGE_LOOP('',(#3256,#3257,#3258,#3259)); +#3256 = ORIENTED_EDGE('',*,*,#3179,.T.); +#3257 = ORIENTED_EDGE('',*,*,#2521,.T.); +#3258 = ORIENTED_EDGE('',*,*,#2545,.F.); +#3259 = ORIENTED_EDGE('',*,*,#2578,.F.); +#3260 = FACE_BOUND('',#3261,.F.); +#3261 = EDGE_LOOP('',(#3262,#3272,#3280,#3288)); +#3262 = ORIENTED_EDGE('',*,*,#3263,.F.); +#3263 = EDGE_CURVE('',#3264,#3266,#3268,.T.); +#3264 = VERTEX_POINT('',#3265); +#3265 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#3266 = VERTEX_POINT('',#3267); +#3267 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#3268 = LINE('',#3269,#3270); +#3269 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#3270 = VECTOR('',#3271,1.); +#3271 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3272 = ORIENTED_EDGE('',*,*,#3273,.T.); +#3273 = EDGE_CURVE('',#3264,#3274,#3276,.T.); +#3274 = VERTEX_POINT('',#3275); +#3275 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#3276 = LINE('',#3277,#3278); +#3277 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#3278 = VECTOR('',#3279,1.); +#3279 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3280 = ORIENTED_EDGE('',*,*,#3281,.T.); +#3281 = EDGE_CURVE('',#3274,#3282,#3284,.T.); +#3282 = VERTEX_POINT('',#3283); +#3283 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#3284 = LINE('',#3285,#3286); +#3285 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#3286 = VECTOR('',#3287,1.); +#3287 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3288 = ORIENTED_EDGE('',*,*,#3289,.T.); +#3289 = EDGE_CURVE('',#3282,#3266,#3290,.T.); +#3290 = LINE('',#3291,#3292); +#3291 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#3292 = VECTOR('',#3293,1.); +#3293 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3294 = PLANE('',#3295); +#3295 = AXIS2_PLACEMENT_3D('',#3296,#3297,#3298); +#3296 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#3297 = DIRECTION('',(0.,0.,1.)); +#3298 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3299 = ADVANCED_FACE('',(#3300,#3306),#3340,.F.); +#3300 = FACE_BOUND('',#3301,.F.); +#3301 = EDGE_LOOP('',(#3302,#3303,#3304,#3305)); +#3302 = ORIENTED_EDGE('',*,*,#3162,.T.); +#3303 = ORIENTED_EDGE('',*,*,#2626,.T.); +#3304 = ORIENTED_EDGE('',*,*,#2650,.F.); +#3305 = ORIENTED_EDGE('',*,*,#2683,.F.); +#3306 = FACE_BOUND('',#3307,.F.); +#3307 = EDGE_LOOP('',(#3308,#3318,#3326,#3334)); +#3308 = ORIENTED_EDGE('',*,*,#3309,.F.); +#3309 = EDGE_CURVE('',#3310,#3312,#3314,.T.); +#3310 = VERTEX_POINT('',#3311); +#3311 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#3312 = VERTEX_POINT('',#3313); +#3313 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#3314 = LINE('',#3315,#3316); +#3315 = CARTESIAN_POINT('',(4.68,0.26829700442,0.3)); +#3316 = VECTOR('',#3317,1.); +#3317 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3318 = ORIENTED_EDGE('',*,*,#3319,.T.); +#3319 = EDGE_CURVE('',#3310,#3320,#3322,.T.); +#3320 = VERTEX_POINT('',#3321); +#3321 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#3322 = LINE('',#3323,#3324); +#3323 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#3324 = VECTOR('',#3325,1.); +#3325 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3326 = ORIENTED_EDGE('',*,*,#3327,.T.); +#3327 = EDGE_CURVE('',#3320,#3328,#3330,.T.); +#3328 = VERTEX_POINT('',#3329); +#3329 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#3330 = LINE('',#3331,#3332); +#3331 = CARTESIAN_POINT('',(5.32,0.26829700442,0.3)); +#3332 = VECTOR('',#3333,1.); +#3333 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3334 = ORIENTED_EDGE('',*,*,#3335,.T.); +#3335 = EDGE_CURVE('',#3328,#3312,#3336,.T.); +#3336 = LINE('',#3337,#3338); +#3337 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#3338 = VECTOR('',#3339,1.); +#3339 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3340 = PLANE('',#3341); +#3341 = AXIS2_PLACEMENT_3D('',#3342,#3343,#3344); +#3342 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#3343 = DIRECTION('',(0.,0.,1.)); +#3344 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3345 = ADVANCED_FACE('',(#3346),#3371,.T.); +#3346 = FACE_BOUND('',#3347,.T.); +#3347 = EDGE_LOOP('',(#3348,#3349,#3357,#3365)); +#3348 = ORIENTED_EDGE('',*,*,#2802,.T.); +#3349 = ORIENTED_EDGE('',*,*,#3350,.T.); +#3350 = EDGE_CURVE('',#2805,#3351,#3353,.T.); +#3351 = VERTEX_POINT('',#3352); +#3352 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#3353 = LINE('',#3354,#3355); +#3354 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#3355 = VECTOR('',#3356,1.); +#3356 = DIRECTION('',(0.,0.,1.)); +#3357 = ORIENTED_EDGE('',*,*,#3358,.T.); +#3358 = EDGE_CURVE('',#3351,#3359,#3361,.T.); +#3359 = VERTEX_POINT('',#3360); +#3360 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#3361 = LINE('',#3362,#3363); +#3362 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#3363 = VECTOR('',#3364,1.); +#3364 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3365 = ORIENTED_EDGE('',*,*,#3366,.T.); +#3366 = EDGE_CURVE('',#3359,#2803,#3367,.T.); +#3367 = LINE('',#3368,#3369); +#3368 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#3369 = VECTOR('',#3370,1.); +#3370 = DIRECTION('',(-0.,0.,-1.)); +#3371 = PLANE('',#3372); +#3372 = AXIS2_PLACEMENT_3D('',#3373,#3374,#3375); +#3373 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#3374 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3375 = DIRECTION('',(0.,0.,1.)); +#3376 = ADVANCED_FACE('',(#3377),#3395,.F.); +#3377 = FACE_BOUND('',#3378,.F.); +#3378 = EDGE_LOOP('',(#3379,#3387,#3388,#3389)); +#3379 = ORIENTED_EDGE('',*,*,#3380,.F.); +#3380 = EDGE_CURVE('',#2821,#3381,#3383,.T.); +#3381 = VERTEX_POINT('',#3382); +#3382 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#3383 = LINE('',#3384,#3385); +#3384 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3385 = VECTOR('',#3386,1.); +#3386 = DIRECTION('',(0.,0.,1.)); +#3387 = ORIENTED_EDGE('',*,*,#2828,.T.); +#3388 = ORIENTED_EDGE('',*,*,#3350,.T.); +#3389 = ORIENTED_EDGE('',*,*,#3390,.F.); +#3390 = EDGE_CURVE('',#3381,#3351,#3391,.T.); +#3391 = LINE('',#3392,#3393); +#3392 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#3393 = VECTOR('',#3394,1.); +#3394 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3395 = PLANE('',#3396); +#3396 = AXIS2_PLACEMENT_3D('',#3397,#3398,#3399); +#3397 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3398 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3399 = DIRECTION('',(0.,-0.,1.)); +#3400 = ADVANCED_FACE('',(#3401),#3419,.F.); +#3401 = FACE_BOUND('',#3402,.F.); +#3402 = EDGE_LOOP('',(#3403,#3404,#3405,#3413)); +#3403 = ORIENTED_EDGE('',*,*,#2820,.T.); +#3404 = ORIENTED_EDGE('',*,*,#3380,.T.); +#3405 = ORIENTED_EDGE('',*,*,#3406,.T.); +#3406 = EDGE_CURVE('',#3381,#3407,#3409,.T.); +#3407 = VERTEX_POINT('',#3408); +#3408 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#3409 = LINE('',#3410,#3411); +#3410 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#3411 = VECTOR('',#3412,1.); +#3412 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3413 = ORIENTED_EDGE('',*,*,#3414,.T.); +#3414 = EDGE_CURVE('',#3407,#2813,#3415,.T.); +#3415 = LINE('',#3416,#3417); +#3416 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3417 = VECTOR('',#3418,1.); +#3418 = DIRECTION('',(-0.,0.,-1.)); +#3419 = PLANE('',#3420); +#3420 = AXIS2_PLACEMENT_3D('',#3421,#3422,#3423); +#3421 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#3422 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3423 = DIRECTION('',(0.,0.,1.)); +#3424 = ADVANCED_FACE('',(#3425),#3436,.F.); +#3425 = FACE_BOUND('',#3426,.F.); +#3426 = EDGE_LOOP('',(#3427,#3428,#3434,#3435)); +#3427 = ORIENTED_EDGE('',*,*,#3414,.F.); +#3428 = ORIENTED_EDGE('',*,*,#3429,.T.); +#3429 = EDGE_CURVE('',#3407,#3359,#3430,.T.); +#3430 = LINE('',#3431,#3432); +#3431 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#3432 = VECTOR('',#3433,1.); +#3433 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3434 = ORIENTED_EDGE('',*,*,#3366,.T.); +#3435 = ORIENTED_EDGE('',*,*,#2812,.T.); +#3436 = PLANE('',#3437); +#3437 = AXIS2_PLACEMENT_3D('',#3438,#3439,#3440); +#3438 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3439 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3440 = DIRECTION('',(-0.,0.,-1.)); +#3441 = ADVANCED_FACE('',(#3442),#3467,.T.); +#3442 = FACE_BOUND('',#3443,.T.); +#3443 = EDGE_LOOP('',(#3444,#3445,#3453,#3461)); +#3444 = ORIENTED_EDGE('',*,*,#2836,.T.); +#3445 = ORIENTED_EDGE('',*,*,#3446,.T.); +#3446 = EDGE_CURVE('',#2839,#3447,#3449,.T.); +#3447 = VERTEX_POINT('',#3448); +#3448 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#3449 = LINE('',#3450,#3451); +#3450 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#3451 = VECTOR('',#3452,1.); +#3452 = DIRECTION('',(0.,0.,1.)); +#3453 = ORIENTED_EDGE('',*,*,#3454,.T.); +#3454 = EDGE_CURVE('',#3447,#3455,#3457,.T.); +#3455 = VERTEX_POINT('',#3456); +#3456 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#3457 = LINE('',#3458,#3459); +#3458 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#3459 = VECTOR('',#3460,1.); +#3460 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3461 = ORIENTED_EDGE('',*,*,#3462,.T.); +#3462 = EDGE_CURVE('',#3455,#2837,#3463,.T.); +#3463 = LINE('',#3464,#3465); +#3464 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#3465 = VECTOR('',#3466,1.); +#3466 = DIRECTION('',(-0.,0.,-1.)); +#3467 = PLANE('',#3468); +#3468 = AXIS2_PLACEMENT_3D('',#3469,#3470,#3471); +#3469 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#3470 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3471 = DIRECTION('',(0.,0.,1.)); +#3472 = ADVANCED_FACE('',(#3473),#3491,.F.); +#3473 = FACE_BOUND('',#3474,.F.); +#3474 = EDGE_LOOP('',(#3475,#3483,#3484,#3485)); +#3475 = ORIENTED_EDGE('',*,*,#3476,.F.); +#3476 = EDGE_CURVE('',#2855,#3477,#3479,.T.); +#3477 = VERTEX_POINT('',#3478); +#3478 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#3479 = LINE('',#3480,#3481); +#3480 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3481 = VECTOR('',#3482,1.); +#3482 = DIRECTION('',(0.,0.,1.)); +#3483 = ORIENTED_EDGE('',*,*,#2862,.T.); +#3484 = ORIENTED_EDGE('',*,*,#3446,.T.); +#3485 = ORIENTED_EDGE('',*,*,#3486,.F.); +#3486 = EDGE_CURVE('',#3477,#3447,#3487,.T.); +#3487 = LINE('',#3488,#3489); +#3488 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#3489 = VECTOR('',#3490,1.); +#3490 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3491 = PLANE('',#3492); +#3492 = AXIS2_PLACEMENT_3D('',#3493,#3494,#3495); +#3493 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3494 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3495 = DIRECTION('',(0.,-0.,1.)); +#3496 = ADVANCED_FACE('',(#3497),#3515,.F.); +#3497 = FACE_BOUND('',#3498,.F.); +#3498 = EDGE_LOOP('',(#3499,#3500,#3501,#3509)); +#3499 = ORIENTED_EDGE('',*,*,#2854,.T.); +#3500 = ORIENTED_EDGE('',*,*,#3476,.T.); +#3501 = ORIENTED_EDGE('',*,*,#3502,.T.); +#3502 = EDGE_CURVE('',#3477,#3503,#3505,.T.); +#3503 = VERTEX_POINT('',#3504); +#3504 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#3505 = LINE('',#3506,#3507); +#3506 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#3507 = VECTOR('',#3508,1.); +#3508 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3509 = ORIENTED_EDGE('',*,*,#3510,.T.); +#3510 = EDGE_CURVE('',#3503,#2847,#3511,.T.); +#3511 = LINE('',#3512,#3513); +#3512 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#3513 = VECTOR('',#3514,1.); +#3514 = DIRECTION('',(-0.,0.,-1.)); +#3515 = PLANE('',#3516); +#3516 = AXIS2_PLACEMENT_3D('',#3517,#3518,#3519); +#3517 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#3518 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3519 = DIRECTION('',(0.,0.,1.)); +#3520 = ADVANCED_FACE('',(#3521),#3532,.F.); +#3521 = FACE_BOUND('',#3522,.F.); +#3522 = EDGE_LOOP('',(#3523,#3524,#3530,#3531)); +#3523 = ORIENTED_EDGE('',*,*,#3510,.F.); +#3524 = ORIENTED_EDGE('',*,*,#3525,.T.); +#3525 = EDGE_CURVE('',#3503,#3455,#3526,.T.); +#3526 = LINE('',#3527,#3528); +#3527 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#3528 = VECTOR('',#3529,1.); +#3529 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3530 = ORIENTED_EDGE('',*,*,#3462,.T.); +#3531 = ORIENTED_EDGE('',*,*,#2846,.T.); +#3532 = PLANE('',#3533); +#3533 = AXIS2_PLACEMENT_3D('',#3534,#3535,#3536); +#3534 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#3535 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3536 = DIRECTION('',(-0.,0.,-1.)); +#3537 = ADVANCED_FACE('',(#3538),#3563,.T.); +#3538 = FACE_BOUND('',#3539,.T.); +#3539 = EDGE_LOOP('',(#3540,#3541,#3549,#3557)); +#3540 = ORIENTED_EDGE('',*,*,#2870,.T.); +#3541 = ORIENTED_EDGE('',*,*,#3542,.T.); +#3542 = EDGE_CURVE('',#2873,#3543,#3545,.T.); +#3543 = VERTEX_POINT('',#3544); +#3544 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#3545 = LINE('',#3546,#3547); +#3546 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#3547 = VECTOR('',#3548,1.); +#3548 = DIRECTION('',(0.,0.,1.)); +#3549 = ORIENTED_EDGE('',*,*,#3550,.T.); +#3550 = EDGE_CURVE('',#3543,#3551,#3553,.T.); +#3551 = VERTEX_POINT('',#3552); +#3552 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#3553 = LINE('',#3554,#3555); +#3554 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#3555 = VECTOR('',#3556,1.); +#3556 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3557 = ORIENTED_EDGE('',*,*,#3558,.T.); +#3558 = EDGE_CURVE('',#3551,#2871,#3559,.T.); +#3559 = LINE('',#3560,#3561); +#3560 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#3561 = VECTOR('',#3562,1.); +#3562 = DIRECTION('',(-0.,0.,-1.)); +#3563 = PLANE('',#3564); +#3564 = AXIS2_PLACEMENT_3D('',#3565,#3566,#3567); +#3565 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#3566 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3567 = DIRECTION('',(0.,0.,1.)); +#3568 = ADVANCED_FACE('',(#3569),#3587,.F.); +#3569 = FACE_BOUND('',#3570,.F.); +#3570 = EDGE_LOOP('',(#3571,#3579,#3580,#3581)); +#3571 = ORIENTED_EDGE('',*,*,#3572,.F.); +#3572 = EDGE_CURVE('',#2889,#3573,#3575,.T.); +#3573 = VERTEX_POINT('',#3574); +#3574 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#3575 = LINE('',#3576,#3577); +#3576 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3577 = VECTOR('',#3578,1.); +#3578 = DIRECTION('',(0.,0.,1.)); +#3579 = ORIENTED_EDGE('',*,*,#2896,.T.); +#3580 = ORIENTED_EDGE('',*,*,#3542,.T.); +#3581 = ORIENTED_EDGE('',*,*,#3582,.F.); +#3582 = EDGE_CURVE('',#3573,#3543,#3583,.T.); +#3583 = LINE('',#3584,#3585); +#3584 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#3585 = VECTOR('',#3586,1.); +#3586 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3587 = PLANE('',#3588); +#3588 = AXIS2_PLACEMENT_3D('',#3589,#3590,#3591); +#3589 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3590 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3591 = DIRECTION('',(0.,-0.,1.)); +#3592 = ADVANCED_FACE('',(#3593),#3611,.F.); +#3593 = FACE_BOUND('',#3594,.F.); +#3594 = EDGE_LOOP('',(#3595,#3596,#3597,#3605)); +#3595 = ORIENTED_EDGE('',*,*,#2888,.T.); +#3596 = ORIENTED_EDGE('',*,*,#3572,.T.); +#3597 = ORIENTED_EDGE('',*,*,#3598,.T.); +#3598 = EDGE_CURVE('',#3573,#3599,#3601,.T.); +#3599 = VERTEX_POINT('',#3600); +#3600 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#3601 = LINE('',#3602,#3603); +#3602 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#3603 = VECTOR('',#3604,1.); +#3604 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3605 = ORIENTED_EDGE('',*,*,#3606,.T.); +#3606 = EDGE_CURVE('',#3599,#2881,#3607,.T.); +#3607 = LINE('',#3608,#3609); +#3608 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3609 = VECTOR('',#3610,1.); +#3610 = DIRECTION('',(-0.,0.,-1.)); +#3611 = PLANE('',#3612); +#3612 = AXIS2_PLACEMENT_3D('',#3613,#3614,#3615); +#3613 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#3614 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3615 = DIRECTION('',(0.,0.,1.)); +#3616 = ADVANCED_FACE('',(#3617),#3628,.F.); +#3617 = FACE_BOUND('',#3618,.F.); +#3618 = EDGE_LOOP('',(#3619,#3620,#3626,#3627)); +#3619 = ORIENTED_EDGE('',*,*,#3606,.F.); +#3620 = ORIENTED_EDGE('',*,*,#3621,.T.); +#3621 = EDGE_CURVE('',#3599,#3551,#3622,.T.); +#3622 = LINE('',#3623,#3624); +#3623 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#3624 = VECTOR('',#3625,1.); +#3625 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3626 = ORIENTED_EDGE('',*,*,#3558,.T.); +#3627 = ORIENTED_EDGE('',*,*,#2880,.T.); +#3628 = PLANE('',#3629); +#3629 = AXIS2_PLACEMENT_3D('',#3630,#3631,#3632); +#3630 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3631 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3632 = DIRECTION('',(-0.,0.,-1.)); +#3633 = ADVANCED_FACE('',(#3634),#3691,.T.); +#3634 = FACE_BOUND('',#3635,.T.); +#3635 = EDGE_LOOP('',(#3636,#3646,#3654,#3662,#3668,#3669,#3677,#3685)); +#3636 = ORIENTED_EDGE('',*,*,#3637,.T.); +#3637 = EDGE_CURVE('',#3638,#3640,#3642,.T.); +#3638 = VERTEX_POINT('',#3639); +#3639 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#3640 = VERTEX_POINT('',#3641); +#3641 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#3642 = LINE('',#3643,#3644); +#3643 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#3644 = VECTOR('',#3645,1.); +#3645 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3646 = ORIENTED_EDGE('',*,*,#3647,.T.); +#3647 = EDGE_CURVE('',#3640,#3648,#3650,.T.); +#3648 = VERTEX_POINT('',#3649); +#3649 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#3650 = LINE('',#3651,#3652); +#3651 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#3652 = VECTOR('',#3653,1.); +#3653 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3654 = ORIENTED_EDGE('',*,*,#3655,.T.); +#3655 = EDGE_CURVE('',#3648,#3656,#3658,.T.); +#3656 = VERTEX_POINT('',#3657); +#3657 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#3658 = LINE('',#3659,#3660); +#3659 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#3660 = VECTOR('',#3661,1.); +#3661 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#3662 = ORIENTED_EDGE('',*,*,#3663,.T.); +#3663 = EDGE_CURVE('',#3656,#3220,#3664,.T.); +#3664 = LINE('',#3665,#3666); +#3665 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#3666 = VECTOR('',#3667,1.); +#3667 = DIRECTION('',(0.,0.,1.)); +#3668 = ORIENTED_EDGE('',*,*,#3217,.F.); +#3669 = ORIENTED_EDGE('',*,*,#3670,.T.); +#3670 = EDGE_CURVE('',#3218,#3671,#3673,.T.); +#3671 = VERTEX_POINT('',#3672); +#3672 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#3673 = LINE('',#3674,#3675); +#3674 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#3675 = VECTOR('',#3676,1.); +#3676 = DIRECTION('',(-0.,0.,-1.)); +#3677 = ORIENTED_EDGE('',*,*,#3678,.T.); +#3678 = EDGE_CURVE('',#3671,#3679,#3681,.T.); +#3679 = VERTEX_POINT('',#3680); +#3680 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#3681 = LINE('',#3682,#3683); +#3682 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#3683 = VECTOR('',#3684,1.); +#3684 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#3685 = ORIENTED_EDGE('',*,*,#3686,.T.); +#3686 = EDGE_CURVE('',#3679,#3638,#3687,.T.); +#3687 = LINE('',#3688,#3689); +#3688 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#3689 = VECTOR('',#3690,1.); +#3690 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#3691 = PLANE('',#3692); +#3692 = AXIS2_PLACEMENT_3D('',#3693,#3694,#3695); +#3693 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#3694 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3695 = DIRECTION('',(0.,0.,1.)); +#3696 = ADVANCED_FACE('',(#3697),#3715,.F.); +#3697 = FACE_BOUND('',#3698,.F.); +#3698 = EDGE_LOOP('',(#3699,#3707,#3713,#3714)); +#3699 = ORIENTED_EDGE('',*,*,#3700,.F.); +#3700 = EDGE_CURVE('',#3701,#3236,#3703,.T.); +#3701 = VERTEX_POINT('',#3702); +#3702 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3703 = LINE('',#3704,#3705); +#3704 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3705 = VECTOR('',#3706,1.); +#3706 = DIRECTION('',(0.,0.,1.)); +#3707 = ORIENTED_EDGE('',*,*,#3708,.T.); +#3708 = EDGE_CURVE('',#3701,#3656,#3709,.T.); +#3709 = LINE('',#3710,#3711); +#3710 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3711 = VECTOR('',#3712,1.); +#3712 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3713 = ORIENTED_EDGE('',*,*,#3663,.T.); +#3714 = ORIENTED_EDGE('',*,*,#3243,.F.); +#3715 = PLANE('',#3716); +#3716 = AXIS2_PLACEMENT_3D('',#3717,#3718,#3719); +#3717 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3718 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3719 = DIRECTION('',(0.,-0.,1.)); +#3720 = ADVANCED_FACE('',(#3721),#3771,.F.); +#3721 = FACE_BOUND('',#3722,.F.); +#3722 = EDGE_LOOP('',(#3723,#3733,#3741,#3747,#3748,#3749,#3757,#3765)); +#3723 = ORIENTED_EDGE('',*,*,#3724,.T.); +#3724 = EDGE_CURVE('',#3725,#3727,#3729,.T.); +#3725 = VERTEX_POINT('',#3726); +#3726 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#3727 = VERTEX_POINT('',#3728); +#3728 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#3729 = LINE('',#3730,#3731); +#3730 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#3731 = VECTOR('',#3732,1.); +#3732 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3733 = ORIENTED_EDGE('',*,*,#3734,.T.); +#3734 = EDGE_CURVE('',#3727,#3735,#3737,.T.); +#3735 = VERTEX_POINT('',#3736); +#3736 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#3737 = LINE('',#3738,#3739); +#3738 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#3739 = VECTOR('',#3740,1.); +#3740 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3741 = ORIENTED_EDGE('',*,*,#3742,.T.); +#3742 = EDGE_CURVE('',#3735,#3701,#3743,.T.); +#3743 = LINE('',#3744,#3745); +#3744 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#3745 = VECTOR('',#3746,1.); +#3746 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#3747 = ORIENTED_EDGE('',*,*,#3700,.T.); +#3748 = ORIENTED_EDGE('',*,*,#3235,.F.); +#3749 = ORIENTED_EDGE('',*,*,#3750,.T.); +#3750 = EDGE_CURVE('',#3228,#3751,#3753,.T.); +#3751 = VERTEX_POINT('',#3752); +#3752 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#3753 = LINE('',#3754,#3755); +#3754 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3755 = VECTOR('',#3756,1.); +#3756 = DIRECTION('',(-0.,0.,-1.)); +#3757 = ORIENTED_EDGE('',*,*,#3758,.T.); +#3758 = EDGE_CURVE('',#3751,#3759,#3761,.T.); +#3759 = VERTEX_POINT('',#3760); +#3760 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#3761 = LINE('',#3762,#3763); +#3762 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#3763 = VECTOR('',#3764,1.); +#3764 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#3765 = ORIENTED_EDGE('',*,*,#3766,.T.); +#3766 = EDGE_CURVE('',#3759,#3725,#3767,.T.); +#3767 = LINE('',#3768,#3769); +#3768 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#3769 = VECTOR('',#3770,1.); +#3770 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#3771 = PLANE('',#3772); +#3772 = AXIS2_PLACEMENT_3D('',#3773,#3774,#3775); +#3773 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#3774 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3775 = DIRECTION('',(0.,0.,1.)); +#3776 = ADVANCED_FACE('',(#3777),#3788,.F.); +#3777 = FACE_BOUND('',#3778,.F.); +#3778 = EDGE_LOOP('',(#3779,#3780,#3781,#3782)); +#3779 = ORIENTED_EDGE('',*,*,#3750,.F.); +#3780 = ORIENTED_EDGE('',*,*,#3227,.F.); +#3781 = ORIENTED_EDGE('',*,*,#3670,.T.); +#3782 = ORIENTED_EDGE('',*,*,#3783,.F.); +#3783 = EDGE_CURVE('',#3751,#3671,#3784,.T.); +#3784 = LINE('',#3785,#3786); +#3785 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#3786 = VECTOR('',#3787,1.); +#3787 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3788 = PLANE('',#3789); +#3789 = AXIS2_PLACEMENT_3D('',#3790,#3791,#3792); +#3790 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3791 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3792 = DIRECTION('',(-0.,0.,-1.)); +#3793 = ADVANCED_FACE('',(#3794),#3819,.T.); +#3794 = FACE_BOUND('',#3795,.T.); +#3795 = EDGE_LOOP('',(#3796,#3806,#3812,#3813)); +#3796 = ORIENTED_EDGE('',*,*,#3797,.T.); +#3797 = EDGE_CURVE('',#3798,#3800,#3802,.T.); +#3798 = VERTEX_POINT('',#3799); +#3799 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#3800 = VERTEX_POINT('',#3801); +#3801 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#3802 = LINE('',#3803,#3804); +#3803 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#3804 = VECTOR('',#3805,1.); +#3805 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3806 = ORIENTED_EDGE('',*,*,#3807,.T.); +#3807 = EDGE_CURVE('',#3800,#3266,#3808,.T.); +#3808 = LINE('',#3809,#3810); +#3809 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#3810 = VECTOR('',#3811,1.); +#3811 = DIRECTION('',(0.,0.,1.)); +#3812 = ORIENTED_EDGE('',*,*,#3263,.F.); +#3813 = ORIENTED_EDGE('',*,*,#3814,.T.); +#3814 = EDGE_CURVE('',#3264,#3798,#3815,.T.); +#3815 = LINE('',#3816,#3817); +#3816 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#3817 = VECTOR('',#3818,1.); +#3818 = DIRECTION('',(-0.,0.,-1.)); +#3819 = PLANE('',#3820); +#3820 = AXIS2_PLACEMENT_3D('',#3821,#3822,#3823); +#3821 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#3822 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3823 = DIRECTION('',(0.,0.,1.)); +#3824 = ADVANCED_FACE('',(#3825),#3843,.F.); +#3825 = FACE_BOUND('',#3826,.F.); +#3826 = EDGE_LOOP('',(#3827,#3835,#3841,#3842)); +#3827 = ORIENTED_EDGE('',*,*,#3828,.F.); +#3828 = EDGE_CURVE('',#3829,#3282,#3831,.T.); +#3829 = VERTEX_POINT('',#3830); +#3830 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#3831 = LINE('',#3832,#3833); +#3832 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3833 = VECTOR('',#3834,1.); +#3834 = DIRECTION('',(0.,0.,1.)); +#3835 = ORIENTED_EDGE('',*,*,#3836,.T.); +#3836 = EDGE_CURVE('',#3829,#3800,#3837,.T.); +#3837 = LINE('',#3838,#3839); +#3838 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#3839 = VECTOR('',#3840,1.); +#3840 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3841 = ORIENTED_EDGE('',*,*,#3807,.T.); +#3842 = ORIENTED_EDGE('',*,*,#3289,.F.); +#3843 = PLANE('',#3844); +#3844 = AXIS2_PLACEMENT_3D('',#3845,#3846,#3847); +#3845 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3846 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3847 = DIRECTION('',(0.,-0.,1.)); +#3848 = ADVANCED_FACE('',(#3849),#3867,.F.); +#3849 = FACE_BOUND('',#3850,.F.); +#3850 = EDGE_LOOP('',(#3851,#3859,#3860,#3861)); +#3851 = ORIENTED_EDGE('',*,*,#3852,.T.); +#3852 = EDGE_CURVE('',#3853,#3829,#3855,.T.); +#3853 = VERTEX_POINT('',#3854); +#3854 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#3855 = LINE('',#3856,#3857); +#3856 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#3857 = VECTOR('',#3858,1.); +#3858 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3859 = ORIENTED_EDGE('',*,*,#3828,.T.); +#3860 = ORIENTED_EDGE('',*,*,#3281,.F.); +#3861 = ORIENTED_EDGE('',*,*,#3862,.T.); +#3862 = EDGE_CURVE('',#3274,#3853,#3863,.T.); +#3863 = LINE('',#3864,#3865); +#3864 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3865 = VECTOR('',#3866,1.); +#3866 = DIRECTION('',(-0.,0.,-1.)); +#3867 = PLANE('',#3868); +#3868 = AXIS2_PLACEMENT_3D('',#3869,#3870,#3871); +#3869 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#3870 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3871 = DIRECTION('',(0.,0.,1.)); +#3872 = ADVANCED_FACE('',(#3873),#3884,.F.); +#3873 = FACE_BOUND('',#3874,.F.); +#3874 = EDGE_LOOP('',(#3875,#3876,#3877,#3878)); +#3875 = ORIENTED_EDGE('',*,*,#3862,.F.); +#3876 = ORIENTED_EDGE('',*,*,#3273,.F.); +#3877 = ORIENTED_EDGE('',*,*,#3814,.T.); +#3878 = ORIENTED_EDGE('',*,*,#3879,.F.); +#3879 = EDGE_CURVE('',#3853,#3798,#3880,.T.); +#3880 = LINE('',#3881,#3882); +#3881 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#3882 = VECTOR('',#3883,1.); +#3883 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3884 = PLANE('',#3885); +#3885 = AXIS2_PLACEMENT_3D('',#3886,#3887,#3888); +#3886 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3887 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3888 = DIRECTION('',(-0.,0.,-1.)); +#3889 = ADVANCED_FACE('',(#3890),#3947,.T.); +#3890 = FACE_BOUND('',#3891,.T.); +#3891 = EDGE_LOOP('',(#3892,#3902,#3910,#3918,#3924,#3925,#3933,#3941)); +#3892 = ORIENTED_EDGE('',*,*,#3893,.T.); +#3893 = EDGE_CURVE('',#3894,#3896,#3898,.T.); +#3894 = VERTEX_POINT('',#3895); +#3895 = CARTESIAN_POINT('',(4.68,0.351578947368,-3.2)); +#3896 = VERTEX_POINT('',#3897); +#3897 = CARTESIAN_POINT('',(4.68,-0.288421052632,-3.2)); +#3898 = LINE('',#3899,#3900); +#3899 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#3900 = VECTOR('',#3901,1.); +#3901 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3902 = ORIENTED_EDGE('',*,*,#3903,.T.); +#3903 = EDGE_CURVE('',#3896,#3904,#3906,.T.); +#3904 = VERTEX_POINT('',#3905); +#3905 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#3906 = LINE('',#3907,#3908); +#3907 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#3908 = VECTOR('',#3909,1.); +#3909 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3910 = ORIENTED_EDGE('',*,*,#3911,.T.); +#3911 = EDGE_CURVE('',#3904,#3912,#3914,.T.); +#3912 = VERTEX_POINT('',#3913); +#3913 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#3914 = LINE('',#3915,#3916); +#3915 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#3916 = VECTOR('',#3917,1.); +#3917 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#3918 = ORIENTED_EDGE('',*,*,#3919,.T.); +#3919 = EDGE_CURVE('',#3912,#3312,#3920,.T.); +#3920 = LINE('',#3921,#3922); +#3921 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#3922 = VECTOR('',#3923,1.); +#3923 = DIRECTION('',(0.,0.,1.)); +#3924 = ORIENTED_EDGE('',*,*,#3309,.F.); +#3925 = ORIENTED_EDGE('',*,*,#3926,.T.); +#3926 = EDGE_CURVE('',#3310,#3927,#3929,.T.); +#3927 = VERTEX_POINT('',#3928); +#3928 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#3929 = LINE('',#3930,#3931); +#3930 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#3931 = VECTOR('',#3932,1.); +#3932 = DIRECTION('',(-0.,0.,-1.)); +#3933 = ORIENTED_EDGE('',*,*,#3934,.T.); +#3934 = EDGE_CURVE('',#3927,#3935,#3937,.T.); +#3935 = VERTEX_POINT('',#3936); +#3936 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#3937 = LINE('',#3938,#3939); +#3938 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#3939 = VECTOR('',#3940,1.); +#3940 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#3941 = ORIENTED_EDGE('',*,*,#3942,.T.); +#3942 = EDGE_CURVE('',#3935,#3894,#3943,.T.); +#3943 = LINE('',#3944,#3945); +#3944 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#3945 = VECTOR('',#3946,1.); +#3946 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#3947 = PLANE('',#3948); +#3948 = AXIS2_PLACEMENT_3D('',#3949,#3950,#3951); +#3949 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#3950 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3951 = DIRECTION('',(0.,0.,1.)); +#3952 = ADVANCED_FACE('',(#3953),#3971,.F.); +#3953 = FACE_BOUND('',#3954,.F.); +#3954 = EDGE_LOOP('',(#3955,#3963,#3969,#3970)); +#3955 = ORIENTED_EDGE('',*,*,#3956,.F.); +#3956 = EDGE_CURVE('',#3957,#3328,#3959,.T.); +#3957 = VERTEX_POINT('',#3958); +#3958 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3959 = LINE('',#3960,#3961); +#3960 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3961 = VECTOR('',#3962,1.); +#3962 = DIRECTION('',(0.,0.,1.)); +#3963 = ORIENTED_EDGE('',*,*,#3964,.T.); +#3964 = EDGE_CURVE('',#3957,#3912,#3965,.T.); +#3965 = LINE('',#3966,#3967); +#3966 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3967 = VECTOR('',#3968,1.); +#3968 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3969 = ORIENTED_EDGE('',*,*,#3919,.T.); +#3970 = ORIENTED_EDGE('',*,*,#3335,.F.); +#3971 = PLANE('',#3972); +#3972 = AXIS2_PLACEMENT_3D('',#3973,#3974,#3975); +#3973 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3974 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3975 = DIRECTION('',(0.,-0.,1.)); +#3976 = ADVANCED_FACE('',(#3977),#4027,.F.); +#3977 = FACE_BOUND('',#3978,.F.); +#3978 = EDGE_LOOP('',(#3979,#3989,#3997,#4003,#4004,#4005,#4013,#4021)); +#3979 = ORIENTED_EDGE('',*,*,#3980,.T.); +#3980 = EDGE_CURVE('',#3981,#3983,#3985,.T.); +#3981 = VERTEX_POINT('',#3982); +#3982 = CARTESIAN_POINT('',(5.32,0.351578947368,-3.2)); +#3983 = VERTEX_POINT('',#3984); +#3984 = CARTESIAN_POINT('',(5.32,-0.288421052632,-3.2)); +#3985 = LINE('',#3986,#3987); +#3986 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#3987 = VECTOR('',#3988,1.); +#3988 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3989 = ORIENTED_EDGE('',*,*,#3990,.T.); +#3990 = EDGE_CURVE('',#3983,#3991,#3993,.T.); +#3991 = VERTEX_POINT('',#3992); +#3992 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#3993 = LINE('',#3994,#3995); +#3994 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#3995 = VECTOR('',#3996,1.); +#3996 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3997 = ORIENTED_EDGE('',*,*,#3998,.T.); +#3998 = EDGE_CURVE('',#3991,#3957,#3999,.T.); +#3999 = LINE('',#4000,#4001); +#4000 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#4001 = VECTOR('',#4002,1.); +#4002 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#4003 = ORIENTED_EDGE('',*,*,#3956,.T.); +#4004 = ORIENTED_EDGE('',*,*,#3327,.F.); +#4005 = ORIENTED_EDGE('',*,*,#4006,.T.); +#4006 = EDGE_CURVE('',#3320,#4007,#4009,.T.); +#4007 = VERTEX_POINT('',#4008); +#4008 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4009 = LINE('',#4010,#4011); +#4010 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#4011 = VECTOR('',#4012,1.); +#4012 = DIRECTION('',(-0.,0.,-1.)); +#4013 = ORIENTED_EDGE('',*,*,#4014,.T.); +#4014 = EDGE_CURVE('',#4007,#4015,#4017,.T.); +#4015 = VERTEX_POINT('',#4016); +#4016 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4017 = LINE('',#4018,#4019); +#4018 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4019 = VECTOR('',#4020,1.); +#4020 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#4021 = ORIENTED_EDGE('',*,*,#4022,.T.); +#4022 = EDGE_CURVE('',#4015,#3981,#4023,.T.); +#4023 = LINE('',#4024,#4025); +#4024 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4025 = VECTOR('',#4026,1.); +#4026 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#4027 = PLANE('',#4028); +#4028 = AXIS2_PLACEMENT_3D('',#4029,#4030,#4031); +#4029 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#4030 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4031 = DIRECTION('',(0.,0.,1.)); +#4032 = ADVANCED_FACE('',(#4033),#4044,.F.); +#4033 = FACE_BOUND('',#4034,.F.); +#4034 = EDGE_LOOP('',(#4035,#4036,#4037,#4038)); +#4035 = ORIENTED_EDGE('',*,*,#4006,.F.); +#4036 = ORIENTED_EDGE('',*,*,#3319,.F.); +#4037 = ORIENTED_EDGE('',*,*,#3926,.T.); +#4038 = ORIENTED_EDGE('',*,*,#4039,.F.); +#4039 = EDGE_CURVE('',#4007,#3927,#4040,.T.); +#4040 = LINE('',#4041,#4042); +#4041 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4042 = VECTOR('',#4043,1.); +#4043 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4044 = PLANE('',#4045); +#4045 = AXIS2_PLACEMENT_3D('',#4046,#4047,#4048); +#4046 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#4047 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4048 = DIRECTION('',(-0.,0.,-1.)); +#4049 = ADVANCED_FACE('',(#4050),#4075,.F.); +#4050 = FACE_BOUND('',#4051,.T.); +#4051 = EDGE_LOOP('',(#4052,#4060,#4068,#4074)); +#4052 = ORIENTED_EDGE('',*,*,#4053,.F.); +#4053 = EDGE_CURVE('',#4054,#3351,#4056,.T.); +#4054 = VERTEX_POINT('',#4055); +#4055 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#4056 = LINE('',#4057,#4058); +#4057 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#4058 = VECTOR('',#4059,1.); +#4059 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#4060 = ORIENTED_EDGE('',*,*,#4061,.T.); +#4061 = EDGE_CURVE('',#4054,#4062,#4064,.T.); +#4062 = VERTEX_POINT('',#4063); +#4063 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#4064 = LINE('',#4065,#4066); +#4065 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#4066 = VECTOR('',#4067,1.); +#4067 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4068 = ORIENTED_EDGE('',*,*,#4069,.T.); +#4069 = EDGE_CURVE('',#4062,#3359,#4070,.T.); +#4070 = LINE('',#4071,#4072); +#4071 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#4072 = VECTOR('',#4073,1.); +#4073 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#4074 = ORIENTED_EDGE('',*,*,#3358,.F.); +#4075 = PLANE('',#4076); +#4076 = AXIS2_PLACEMENT_3D('',#4077,#4078,#4079); +#4077 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#4078 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4079 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#4080 = ADVANCED_FACE('',(#4081),#4099,.T.); +#4081 = FACE_BOUND('',#4082,.F.); +#4082 = EDGE_LOOP('',(#4083,#4091,#4092,#4093)); +#4083 = ORIENTED_EDGE('',*,*,#4084,.T.); +#4084 = EDGE_CURVE('',#4085,#3381,#4087,.T.); +#4085 = VERTEX_POINT('',#4086); +#4086 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#4087 = LINE('',#4088,#4089); +#4088 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#4089 = VECTOR('',#4090,1.); +#4090 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#4091 = ORIENTED_EDGE('',*,*,#3390,.T.); +#4092 = ORIENTED_EDGE('',*,*,#4053,.F.); +#4093 = ORIENTED_EDGE('',*,*,#4094,.F.); +#4094 = EDGE_CURVE('',#4085,#4054,#4095,.T.); +#4095 = LINE('',#4096,#4097); +#4096 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#4097 = VECTOR('',#4098,1.); +#4098 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4099 = PLANE('',#4100); +#4100 = AXIS2_PLACEMENT_3D('',#4101,#4102,#4103); +#4101 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#4102 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#4103 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#4104 = ADVANCED_FACE('',(#4105),#4123,.T.); +#4105 = FACE_BOUND('',#4106,.F.); +#4106 = EDGE_LOOP('',(#4107,#4108,#4116,#4122)); +#4107 = ORIENTED_EDGE('',*,*,#4084,.F.); +#4108 = ORIENTED_EDGE('',*,*,#4109,.T.); +#4109 = EDGE_CURVE('',#4085,#4110,#4112,.T.); +#4110 = VERTEX_POINT('',#4111); +#4111 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#4112 = LINE('',#4113,#4114); +#4113 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#4114 = VECTOR('',#4115,1.); +#4115 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4116 = ORIENTED_EDGE('',*,*,#4117,.T.); +#4117 = EDGE_CURVE('',#4110,#3407,#4118,.T.); +#4118 = LINE('',#4119,#4120); +#4119 = CARTESIAN_POINT('',(0.146666666667,0.146666666667,6.473333333333 + )); +#4120 = VECTOR('',#4121,1.); +#4121 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#4122 = ORIENTED_EDGE('',*,*,#3406,.F.); +#4123 = PLANE('',#4124); +#4124 = AXIS2_PLACEMENT_3D('',#4125,#4126,#4127); +#4125 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#4126 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4127 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#4128 = ADVANCED_FACE('',(#4129),#4140,.T.); +#4129 = FACE_BOUND('',#4130,.F.); +#4130 = EDGE_LOOP('',(#4131,#4132,#4138,#4139)); +#4131 = ORIENTED_EDGE('',*,*,#4117,.F.); +#4132 = ORIENTED_EDGE('',*,*,#4133,.T.); +#4133 = EDGE_CURVE('',#4110,#4062,#4134,.T.); +#4134 = LINE('',#4135,#4136); +#4135 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#4136 = VECTOR('',#4137,1.); +#4137 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4138 = ORIENTED_EDGE('',*,*,#4069,.T.); +#4139 = ORIENTED_EDGE('',*,*,#3429,.F.); +#4140 = PLANE('',#4141); +#4141 = AXIS2_PLACEMENT_3D('',#4142,#4143,#4144); +#4142 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#4143 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#4144 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#4145 = ADVANCED_FACE('',(#4146),#4171,.F.); +#4146 = FACE_BOUND('',#4147,.T.); +#4147 = EDGE_LOOP('',(#4148,#4156,#4164,#4170)); +#4148 = ORIENTED_EDGE('',*,*,#4149,.F.); +#4149 = EDGE_CURVE('',#4150,#3447,#4152,.T.); +#4150 = VERTEX_POINT('',#4151); +#4151 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#4152 = LINE('',#4153,#4154); +#4153 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#4154 = VECTOR('',#4155,1.); +#4155 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#4156 = ORIENTED_EDGE('',*,*,#4157,.T.); +#4157 = EDGE_CURVE('',#4150,#4158,#4160,.T.); +#4158 = VERTEX_POINT('',#4159); +#4159 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#4160 = LINE('',#4161,#4162); +#4161 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#4162 = VECTOR('',#4163,1.); +#4163 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4164 = ORIENTED_EDGE('',*,*,#4165,.T.); +#4165 = EDGE_CURVE('',#4158,#3455,#4166,.T.); +#4166 = LINE('',#4167,#4168); +#4167 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#4168 = VECTOR('',#4169,1.); +#4169 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#4170 = ORIENTED_EDGE('',*,*,#3454,.F.); +#4171 = PLANE('',#4172); +#4172 = AXIS2_PLACEMENT_3D('',#4173,#4174,#4175); +#4173 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#4174 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4175 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#4176 = ADVANCED_FACE('',(#4177),#4195,.T.); +#4177 = FACE_BOUND('',#4178,.F.); +#4178 = EDGE_LOOP('',(#4179,#4187,#4188,#4189)); +#4179 = ORIENTED_EDGE('',*,*,#4180,.T.); +#4180 = EDGE_CURVE('',#4181,#3477,#4183,.T.); +#4181 = VERTEX_POINT('',#4182); +#4182 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#4183 = LINE('',#4184,#4185); +#4184 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#4185 = VECTOR('',#4186,1.); +#4186 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#4187 = ORIENTED_EDGE('',*,*,#3486,.T.); +#4188 = ORIENTED_EDGE('',*,*,#4149,.F.); +#4189 = ORIENTED_EDGE('',*,*,#4190,.F.); +#4190 = EDGE_CURVE('',#4181,#4150,#4191,.T.); +#4191 = LINE('',#4192,#4193); +#4192 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#4193 = VECTOR('',#4194,1.); +#4194 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4195 = PLANE('',#4196); +#4196 = AXIS2_PLACEMENT_3D('',#4197,#4198,#4199); +#4197 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#4198 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#4199 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#4200 = ADVANCED_FACE('',(#4201),#4219,.T.); +#4201 = FACE_BOUND('',#4202,.F.); +#4202 = EDGE_LOOP('',(#4203,#4204,#4212,#4218)); +#4203 = ORIENTED_EDGE('',*,*,#4180,.F.); +#4204 = ORIENTED_EDGE('',*,*,#4205,.T.); +#4205 = EDGE_CURVE('',#4181,#4206,#4208,.T.); +#4206 = VERTEX_POINT('',#4207); +#4207 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#4208 = LINE('',#4209,#4210); +#4209 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#4210 = VECTOR('',#4211,1.); +#4211 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4212 = ORIENTED_EDGE('',*,*,#4213,.T.); +#4213 = EDGE_CURVE('',#4206,#3503,#4214,.T.); +#4214 = LINE('',#4215,#4216); +#4215 = CARTESIAN_POINT('',(5.146666666667,0.146666666667,6.473333333333 + )); +#4216 = VECTOR('',#4217,1.); +#4217 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#4218 = ORIENTED_EDGE('',*,*,#3502,.F.); +#4219 = PLANE('',#4220); +#4220 = AXIS2_PLACEMENT_3D('',#4221,#4222,#4223); +#4221 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#4222 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4223 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#4224 = ADVANCED_FACE('',(#4225),#4236,.T.); +#4225 = FACE_BOUND('',#4226,.F.); +#4226 = EDGE_LOOP('',(#4227,#4228,#4234,#4235)); +#4227 = ORIENTED_EDGE('',*,*,#4213,.F.); +#4228 = ORIENTED_EDGE('',*,*,#4229,.T.); +#4229 = EDGE_CURVE('',#4206,#4158,#4230,.T.); +#4230 = LINE('',#4231,#4232); +#4231 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#4232 = VECTOR('',#4233,1.); +#4233 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4234 = ORIENTED_EDGE('',*,*,#4165,.T.); +#4235 = ORIENTED_EDGE('',*,*,#3525,.F.); +#4236 = PLANE('',#4237); +#4237 = AXIS2_PLACEMENT_3D('',#4238,#4239,#4240); +#4238 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#4239 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#4240 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#4241 = ADVANCED_FACE('',(#4242),#4267,.F.); +#4242 = FACE_BOUND('',#4243,.T.); +#4243 = EDGE_LOOP('',(#4244,#4252,#4260,#4266)); +#4244 = ORIENTED_EDGE('',*,*,#4245,.F.); +#4245 = EDGE_CURVE('',#4246,#3543,#4248,.T.); +#4246 = VERTEX_POINT('',#4247); +#4247 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#4248 = LINE('',#4249,#4250); +#4249 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#4250 = VECTOR('',#4251,1.); +#4251 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#4252 = ORIENTED_EDGE('',*,*,#4253,.T.); +#4253 = EDGE_CURVE('',#4246,#4254,#4256,.T.); +#4254 = VERTEX_POINT('',#4255); +#4255 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#4256 = LINE('',#4257,#4258); +#4257 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#4258 = VECTOR('',#4259,1.); +#4259 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4260 = ORIENTED_EDGE('',*,*,#4261,.T.); +#4261 = EDGE_CURVE('',#4254,#3551,#4262,.T.); +#4262 = LINE('',#4263,#4264); +#4263 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#4264 = VECTOR('',#4265,1.); +#4265 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#4266 = ORIENTED_EDGE('',*,*,#3550,.F.); +#4267 = PLANE('',#4268); +#4268 = AXIS2_PLACEMENT_3D('',#4269,#4270,#4271); +#4269 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#4270 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4271 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#4272 = ADVANCED_FACE('',(#4273),#4291,.T.); +#4273 = FACE_BOUND('',#4274,.F.); +#4274 = EDGE_LOOP('',(#4275,#4283,#4284,#4285)); +#4275 = ORIENTED_EDGE('',*,*,#4276,.F.); +#4276 = EDGE_CURVE('',#3573,#4277,#4279,.T.); +#4277 = VERTEX_POINT('',#4278); +#4278 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#4279 = LINE('',#4280,#4281); +#4280 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#4281 = VECTOR('',#4282,1.); +#4282 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#4283 = ORIENTED_EDGE('',*,*,#3582,.T.); +#4284 = ORIENTED_EDGE('',*,*,#4245,.F.); +#4285 = ORIENTED_EDGE('',*,*,#4286,.F.); +#4286 = EDGE_CURVE('',#4277,#4246,#4287,.T.); +#4287 = LINE('',#4288,#4289); +#4288 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#4289 = VECTOR('',#4290,1.); +#4290 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4291 = PLANE('',#4292); +#4292 = AXIS2_PLACEMENT_3D('',#4293,#4294,#4295); +#4293 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#4294 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#4295 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#4296 = ADVANCED_FACE('',(#4297),#4315,.T.); +#4297 = FACE_BOUND('',#4298,.F.); +#4298 = EDGE_LOOP('',(#4299,#4300,#4308,#4314)); +#4299 = ORIENTED_EDGE('',*,*,#4276,.T.); +#4300 = ORIENTED_EDGE('',*,*,#4301,.T.); +#4301 = EDGE_CURVE('',#4277,#4302,#4304,.T.); +#4302 = VERTEX_POINT('',#4303); +#4303 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#4304 = LINE('',#4305,#4306); +#4305 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#4306 = VECTOR('',#4307,1.); +#4307 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4308 = ORIENTED_EDGE('',*,*,#4309,.T.); +#4309 = EDGE_CURVE('',#4302,#3599,#4310,.T.); +#4310 = LINE('',#4311,#4312); +#4311 = CARTESIAN_POINT('',(2.646666666667,0.146666666667,6.473333333333 + )); +#4312 = VECTOR('',#4313,1.); +#4313 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#4314 = ORIENTED_EDGE('',*,*,#3598,.F.); +#4315 = PLANE('',#4316); +#4316 = AXIS2_PLACEMENT_3D('',#4317,#4318,#4319); +#4317 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#4318 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4319 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#4320 = ADVANCED_FACE('',(#4321),#4332,.T.); +#4321 = FACE_BOUND('',#4322,.F.); +#4322 = EDGE_LOOP('',(#4323,#4324,#4330,#4331)); +#4323 = ORIENTED_EDGE('',*,*,#4309,.F.); +#4324 = ORIENTED_EDGE('',*,*,#4325,.T.); +#4325 = EDGE_CURVE('',#4302,#4254,#4326,.T.); +#4326 = LINE('',#4327,#4328); +#4327 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#4328 = VECTOR('',#4329,1.); +#4329 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4330 = ORIENTED_EDGE('',*,*,#4261,.T.); +#4331 = ORIENTED_EDGE('',*,*,#3621,.F.); +#4332 = PLANE('',#4333); +#4333 = AXIS2_PLACEMENT_3D('',#4334,#4335,#4336); +#4334 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#4335 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#4336 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#4337 = ADVANCED_FACE('',(#4338),#4379,.F.); +#4338 = FACE_BOUND('',#4339,.T.); +#4339 = EDGE_LOOP('',(#4340,#4350,#4358,#4366,#4372,#4373)); +#4340 = ORIENTED_EDGE('',*,*,#4341,.F.); +#4341 = EDGE_CURVE('',#4342,#4344,#4346,.T.); +#4342 = VERTEX_POINT('',#4343); +#4343 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#4344 = VERTEX_POINT('',#4345); +#4345 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#4346 = LINE('',#4347,#4348); +#4347 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#4348 = VECTOR('',#4349,1.); +#4349 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#4350 = ORIENTED_EDGE('',*,*,#4351,.T.); +#4351 = EDGE_CURVE('',#4342,#4352,#4354,.T.); +#4352 = VERTEX_POINT('',#4353); +#4353 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#4354 = LINE('',#4355,#4356); +#4355 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#4356 = VECTOR('',#4357,1.); +#4357 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4358 = ORIENTED_EDGE('',*,*,#4359,.T.); +#4359 = EDGE_CURVE('',#4352,#4360,#4362,.T.); +#4360 = VERTEX_POINT('',#4361); +#4361 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#4362 = LINE('',#4363,#4364); +#4363 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#4364 = VECTOR('',#4365,1.); +#4365 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#4366 = ORIENTED_EDGE('',*,*,#4367,.T.); +#4367 = EDGE_CURVE('',#4360,#3640,#4368,.T.); +#4368 = LINE('',#4369,#4370); +#4369 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#4370 = VECTOR('',#4371,1.); +#4371 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4372 = ORIENTED_EDGE('',*,*,#3637,.F.); +#4373 = ORIENTED_EDGE('',*,*,#4374,.F.); +#4374 = EDGE_CURVE('',#4344,#3638,#4375,.T.); +#4375 = LINE('',#4376,#4377); +#4376 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#4377 = VECTOR('',#4378,1.); +#4378 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4379 = PLANE('',#4380); +#4380 = AXIS2_PLACEMENT_3D('',#4381,#4382,#4383); +#4381 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#4382 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4383 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#4384 = ADVANCED_FACE('',(#4385),#4410,.F.); +#4385 = FACE_BOUND('',#4386,.F.); +#4386 = EDGE_LOOP('',(#4387,#4388,#4394,#4395,#4396,#4404)); +#4387 = ORIENTED_EDGE('',*,*,#3766,.F.); +#4388 = ORIENTED_EDGE('',*,*,#4389,.T.); +#4389 = EDGE_CURVE('',#3759,#3679,#4390,.T.); +#4390 = LINE('',#4391,#4392); +#4391 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#4392 = VECTOR('',#4393,1.); +#4393 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4394 = ORIENTED_EDGE('',*,*,#3686,.T.); +#4395 = ORIENTED_EDGE('',*,*,#4374,.F.); +#4396 = ORIENTED_EDGE('',*,*,#4397,.F.); +#4397 = EDGE_CURVE('',#4398,#4344,#4400,.T.); +#4398 = VERTEX_POINT('',#4399); +#4399 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#4400 = LINE('',#4401,#4402); +#4401 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#4402 = VECTOR('',#4403,1.); +#4403 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4404 = ORIENTED_EDGE('',*,*,#4405,.T.); +#4405 = EDGE_CURVE('',#4398,#3725,#4406,.T.); +#4406 = LINE('',#4407,#4408); +#4407 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#4408 = VECTOR('',#4409,1.); +#4409 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4410 = PLANE('',#4411); +#4411 = AXIS2_PLACEMENT_3D('',#4412,#4413,#4414); +#4412 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#4413 = DIRECTION('',(-1.209660753807E-16,-0.987762965329,0.155962573473 + )); +#4414 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#4415 = ADVANCED_FACE('',(#4416),#4422,.F.); +#4416 = FACE_BOUND('',#4417,.F.); +#4417 = EDGE_LOOP('',(#4418,#4419,#4420,#4421)); +#4418 = ORIENTED_EDGE('',*,*,#3783,.T.); +#4419 = ORIENTED_EDGE('',*,*,#3678,.T.); +#4420 = ORIENTED_EDGE('',*,*,#4389,.F.); +#4421 = ORIENTED_EDGE('',*,*,#3758,.F.); +#4422 = PLANE('',#4423); +#4423 = AXIS2_PLACEMENT_3D('',#4424,#4425,#4426); +#4424 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#4425 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#4426 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#4427 = ADVANCED_FACE('',(#4428),#4439,.F.); +#4428 = FACE_BOUND('',#4429,.F.); +#4429 = EDGE_LOOP('',(#4430,#4436,#4437,#4438)); +#4430 = ORIENTED_EDGE('',*,*,#4431,.T.); +#4431 = EDGE_CURVE('',#3735,#3648,#4432,.T.); +#4432 = LINE('',#4433,#4434); +#4433 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#4434 = VECTOR('',#4435,1.); +#4435 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4436 = ORIENTED_EDGE('',*,*,#3655,.T.); +#4437 = ORIENTED_EDGE('',*,*,#3708,.F.); +#4438 = ORIENTED_EDGE('',*,*,#3742,.F.); +#4439 = PLANE('',#4440); +#4440 = AXIS2_PLACEMENT_3D('',#4441,#4442,#4443); +#4441 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#4442 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#4443 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#4444 = ADVANCED_FACE('',(#4445),#4465,.F.); +#4445 = FACE_BOUND('',#4446,.F.); +#4446 = EDGE_LOOP('',(#4447,#4448,#4456,#4462,#4463,#4464)); +#4447 = ORIENTED_EDGE('',*,*,#3734,.F.); +#4448 = ORIENTED_EDGE('',*,*,#4449,.F.); +#4449 = EDGE_CURVE('',#4450,#3727,#4452,.T.); +#4450 = VERTEX_POINT('',#4451); +#4451 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#4452 = LINE('',#4453,#4454); +#4453 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#4454 = VECTOR('',#4455,1.); +#4455 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4456 = ORIENTED_EDGE('',*,*,#4457,.T.); +#4457 = EDGE_CURVE('',#4450,#4360,#4458,.T.); +#4458 = LINE('',#4459,#4460); +#4459 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#4460 = VECTOR('',#4461,1.); +#4461 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4462 = ORIENTED_EDGE('',*,*,#4367,.T.); +#4463 = ORIENTED_EDGE('',*,*,#3647,.T.); +#4464 = ORIENTED_EDGE('',*,*,#4431,.F.); +#4465 = PLANE('',#4466); +#4466 = AXIS2_PLACEMENT_3D('',#4467,#4468,#4469); +#4467 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#4468 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473) + ); +#4469 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#4470 = ADVANCED_FACE('',(#4471),#4498,.T.); +#4471 = FACE_BOUND('',#4472,.F.); +#4472 = EDGE_LOOP('',(#4473,#4481,#4489,#4495,#4496,#4497)); +#4473 = ORIENTED_EDGE('',*,*,#4474,.F.); +#4474 = EDGE_CURVE('',#4475,#4398,#4477,.T.); +#4475 = VERTEX_POINT('',#4476); +#4476 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#4477 = LINE('',#4478,#4479); +#4478 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225) + ); +#4479 = VECTOR('',#4480,1.); +#4480 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#4481 = ORIENTED_EDGE('',*,*,#4482,.T.); +#4482 = EDGE_CURVE('',#4475,#4483,#4485,.T.); +#4483 = VERTEX_POINT('',#4484); +#4484 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#4485 = LINE('',#4486,#4487); +#4486 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#4487 = VECTOR('',#4488,1.); +#4488 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4489 = ORIENTED_EDGE('',*,*,#4490,.T.); +#4490 = EDGE_CURVE('',#4483,#4450,#4491,.T.); +#4491 = LINE('',#4492,#4493); +#4492 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#4493 = VECTOR('',#4494,1.); +#4494 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#4495 = ORIENTED_EDGE('',*,*,#4449,.T.); +#4496 = ORIENTED_EDGE('',*,*,#3724,.F.); +#4497 = ORIENTED_EDGE('',*,*,#4405,.F.); +#4498 = PLANE('',#4499); +#4499 = AXIS2_PLACEMENT_3D('',#4500,#4501,#4502); +#4500 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#4501 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4502 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#4503 = ADVANCED_FACE('',(#4504),#4529,.F.); +#4504 = FACE_BOUND('',#4505,.T.); +#4505 = EDGE_LOOP('',(#4506,#4514,#4522,#4528)); +#4506 = ORIENTED_EDGE('',*,*,#4507,.F.); +#4507 = EDGE_CURVE('',#4508,#3798,#4510,.T.); +#4508 = VERTEX_POINT('',#4509); +#4509 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#4510 = LINE('',#4511,#4512); +#4511 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#4512 = VECTOR('',#4513,1.); +#4513 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#4514 = ORIENTED_EDGE('',*,*,#4515,.T.); +#4515 = EDGE_CURVE('',#4508,#4516,#4518,.T.); +#4516 = VERTEX_POINT('',#4517); +#4517 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#4518 = LINE('',#4519,#4520); +#4519 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#4520 = VECTOR('',#4521,1.); +#4521 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4522 = ORIENTED_EDGE('',*,*,#4523,.T.); +#4523 = EDGE_CURVE('',#4516,#3800,#4524,.T.); +#4524 = LINE('',#4525,#4526); +#4525 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#4526 = VECTOR('',#4527,1.); +#4527 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#4528 = ORIENTED_EDGE('',*,*,#3797,.F.); +#4529 = PLANE('',#4530); +#4530 = AXIS2_PLACEMENT_3D('',#4531,#4532,#4533); +#4531 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#4532 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4533 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#4534 = ADVANCED_FACE('',(#4535),#4553,.T.); +#4535 = FACE_BOUND('',#4536,.F.); +#4536 = EDGE_LOOP('',(#4537,#4545,#4551,#4552)); +#4537 = ORIENTED_EDGE('',*,*,#4538,.F.); +#4538 = EDGE_CURVE('',#4539,#3829,#4541,.T.); +#4539 = VERTEX_POINT('',#4540); +#4540 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#4541 = LINE('',#4542,#4543); +#4542 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#4543 = VECTOR('',#4544,1.); +#4544 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#4545 = ORIENTED_EDGE('',*,*,#4546,.T.); +#4546 = EDGE_CURVE('',#4539,#4516,#4547,.T.); +#4547 = LINE('',#4548,#4549); +#4548 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#4549 = VECTOR('',#4550,1.); +#4550 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4551 = ORIENTED_EDGE('',*,*,#4523,.T.); +#4552 = ORIENTED_EDGE('',*,*,#3836,.F.); +#4553 = PLANE('',#4554); +#4554 = AXIS2_PLACEMENT_3D('',#4555,#4556,#4557); +#4555 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#4556 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#4557 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#4558 = ADVANCED_FACE('',(#4559),#4577,.T.); +#4559 = FACE_BOUND('',#4560,.F.); +#4560 = EDGE_LOOP('',(#4561,#4569,#4575,#4576)); +#4561 = ORIENTED_EDGE('',*,*,#4562,.F.); +#4562 = EDGE_CURVE('',#4563,#3853,#4565,.T.); +#4563 = VERTEX_POINT('',#4564); +#4564 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#4565 = LINE('',#4566,#4567); +#4566 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#4567 = VECTOR('',#4568,1.); +#4568 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#4569 = ORIENTED_EDGE('',*,*,#4570,.T.); +#4570 = EDGE_CURVE('',#4563,#4539,#4571,.T.); +#4571 = LINE('',#4572,#4573); +#4572 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#4573 = VECTOR('',#4574,1.); +#4574 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4575 = ORIENTED_EDGE('',*,*,#4538,.T.); +#4576 = ORIENTED_EDGE('',*,*,#3852,.F.); +#4577 = PLANE('',#4578); +#4578 = AXIS2_PLACEMENT_3D('',#4579,#4580,#4581); +#4579 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#4580 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4581 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#4582 = ADVANCED_FACE('',(#4583),#4594,.T.); +#4583 = FACE_BOUND('',#4584,.T.); +#4584 = EDGE_LOOP('',(#4585,#4586,#4592,#4593)); +#4585 = ORIENTED_EDGE('',*,*,#4562,.F.); +#4586 = ORIENTED_EDGE('',*,*,#4587,.T.); +#4587 = EDGE_CURVE('',#4563,#4508,#4588,.T.); +#4588 = LINE('',#4589,#4590); +#4589 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#4590 = VECTOR('',#4591,1.); +#4591 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4592 = ORIENTED_EDGE('',*,*,#4507,.T.); +#4593 = ORIENTED_EDGE('',*,*,#3879,.F.); +#4594 = PLANE('',#4595); +#4595 = AXIS2_PLACEMENT_3D('',#4596,#4597,#4598); +#4596 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#4597 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187) + ); +#4598 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#4599 = ADVANCED_FACE('',(#4600),#4641,.F.); +#4600 = FACE_BOUND('',#4601,.T.); +#4601 = EDGE_LOOP('',(#4602,#4612,#4620,#4628,#4634,#4635)); +#4602 = ORIENTED_EDGE('',*,*,#4603,.F.); +#4603 = EDGE_CURVE('',#4604,#4606,#4608,.T.); +#4604 = VERTEX_POINT('',#4605); +#4605 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#4606 = VERTEX_POINT('',#4607); +#4607 = CARTESIAN_POINT('',(4.682447406934,0.351192514695, + -3.202447406934)); +#4608 = LINE('',#4609,#4610); +#4609 = CARTESIAN_POINT('',(4.846150901889,0.159613036666, + -3.366150901889)); +#4610 = VECTOR('',#4611,1.); +#4611 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#4612 = ORIENTED_EDGE('',*,*,#4613,.T.); +#4613 = EDGE_CURVE('',#4604,#4614,#4616,.T.); +#4614 = VERTEX_POINT('',#4615); +#4615 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#4616 = LINE('',#4617,#4618); +#4617 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#4618 = VECTOR('',#4619,1.); +#4619 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4620 = ORIENTED_EDGE('',*,*,#4621,.T.); +#4621 = EDGE_CURVE('',#4614,#4622,#4624,.T.); +#4622 = VERTEX_POINT('',#4623); +#4623 = CARTESIAN_POINT('',(4.682447406934,-0.288807485305, + -3.202447406934)); +#4624 = LINE('',#4625,#4626); +#4625 = CARTESIAN_POINT('',(4.961511443392,-5.034896900541E-02, + -3.481511443392)); +#4626 = VECTOR('',#4627,1.); +#4627 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#4628 = ORIENTED_EDGE('',*,*,#4629,.T.); +#4629 = EDGE_CURVE('',#4622,#3896,#4630,.T.); +#4630 = LINE('',#4631,#4632); +#4631 = CARTESIAN_POINT('',(4.914309165527,-0.325417236662, + -3.434309165527)); +#4632 = VECTOR('',#4633,1.); +#4633 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4634 = ORIENTED_EDGE('',*,*,#3893,.F.); +#4635 = ORIENTED_EDGE('',*,*,#4636,.F.); +#4636 = EDGE_CURVE('',#4606,#3894,#4637,.T.); +#4637 = LINE('',#4638,#4639); +#4638 = CARTESIAN_POINT('',(4.458413132695,0.386566347469, + -2.978413132695)); +#4639 = VECTOR('',#4640,1.); +#4640 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4641 = PLANE('',#4642); +#4642 = AXIS2_PLACEMENT_3D('',#4643,#4644,#4645); +#4643 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#4644 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4645 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#4646 = ADVANCED_FACE('',(#4647),#4672,.F.); +#4647 = FACE_BOUND('',#4648,.F.); +#4648 = EDGE_LOOP('',(#4649,#4650,#4656,#4657,#4658,#4666)); +#4649 = ORIENTED_EDGE('',*,*,#4022,.F.); +#4650 = ORIENTED_EDGE('',*,*,#4651,.T.); +#4651 = EDGE_CURVE('',#4015,#3935,#4652,.T.); +#4652 = LINE('',#4653,#4654); +#4653 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4654 = VECTOR('',#4655,1.); +#4655 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4656 = ORIENTED_EDGE('',*,*,#3942,.T.); +#4657 = ORIENTED_EDGE('',*,*,#4636,.F.); +#4658 = ORIENTED_EDGE('',*,*,#4659,.F.); +#4659 = EDGE_CURVE('',#4660,#4606,#4662,.T.); +#4660 = VERTEX_POINT('',#4661); +#4661 = CARTESIAN_POINT('',(5.317552593066,0.351192514695, + -3.202447406934)); +#4662 = LINE('',#4663,#4664); +#4663 = CARTESIAN_POINT('',(5.32,0.351192514695,-3.202447406934)); +#4664 = VECTOR('',#4665,1.); +#4665 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4666 = ORIENTED_EDGE('',*,*,#4667,.T.); +#4667 = EDGE_CURVE('',#4660,#3981,#4668,.T.); +#4668 = LINE('',#4669,#4670); +#4669 = CARTESIAN_POINT('',(5.699616963064,0.411518467852, + -2.820383036936)); +#4670 = VECTOR('',#4671,1.); +#4671 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4672 = PLANE('',#4673); +#4673 = AXIS2_PLACEMENT_3D('',#4674,#4675,#4676); +#4674 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4675 = DIRECTION('',(-1.209660753807E-16,-0.987762965329,0.155962573473 + )); +#4676 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#4677 = ADVANCED_FACE('',(#4678),#4684,.F.); +#4678 = FACE_BOUND('',#4679,.F.); +#4679 = EDGE_LOOP('',(#4680,#4681,#4682,#4683)); +#4680 = ORIENTED_EDGE('',*,*,#4039,.T.); +#4681 = ORIENTED_EDGE('',*,*,#3934,.T.); +#4682 = ORIENTED_EDGE('',*,*,#4651,.F.); +#4683 = ORIENTED_EDGE('',*,*,#4014,.F.); +#4684 = PLANE('',#4685); +#4685 = AXIS2_PLACEMENT_3D('',#4686,#4687,#4688); +#4686 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4687 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#4688 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#4689 = ADVANCED_FACE('',(#4690),#4701,.F.); +#4690 = FACE_BOUND('',#4691,.F.); +#4691 = EDGE_LOOP('',(#4692,#4698,#4699,#4700)); +#4692 = ORIENTED_EDGE('',*,*,#4693,.T.); +#4693 = EDGE_CURVE('',#3991,#3904,#4694,.T.); +#4694 = LINE('',#4695,#4696); +#4695 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#4696 = VECTOR('',#4697,1.); +#4697 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4698 = ORIENTED_EDGE('',*,*,#3911,.T.); +#4699 = ORIENTED_EDGE('',*,*,#3964,.F.); +#4700 = ORIENTED_EDGE('',*,*,#3998,.F.); +#4701 = PLANE('',#4702); +#4702 = AXIS2_PLACEMENT_3D('',#4703,#4704,#4705); +#4703 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#4704 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#4705 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#4706 = ADVANCED_FACE('',(#4707),#4727,.F.); +#4707 = FACE_BOUND('',#4708,.F.); +#4708 = EDGE_LOOP('',(#4709,#4710,#4718,#4724,#4725,#4726)); +#4709 = ORIENTED_EDGE('',*,*,#3990,.F.); +#4710 = ORIENTED_EDGE('',*,*,#4711,.F.); +#4711 = EDGE_CURVE('',#4712,#3983,#4714,.T.); +#4712 = VERTEX_POINT('',#4713); +#4713 = CARTESIAN_POINT('',(5.317552593066,-0.288807485305, + -3.202447406934)); +#4714 = LINE('',#4715,#4716); +#4715 = CARTESIAN_POINT('',(5.243720930233,-0.300465116279, + -3.276279069767)); +#4716 = VECTOR('',#4717,1.); +#4717 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4718 = ORIENTED_EDGE('',*,*,#4719,.T.); +#4719 = EDGE_CURVE('',#4712,#4622,#4720,.T.); +#4720 = LINE('',#4721,#4722); +#4721 = CARTESIAN_POINT('',(5.32,-0.288807485305,-3.202447406934)); +#4722 = VECTOR('',#4723,1.); +#4723 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4724 = ORIENTED_EDGE('',*,*,#4629,.T.); +#4725 = ORIENTED_EDGE('',*,*,#3903,.T.); +#4726 = ORIENTED_EDGE('',*,*,#4693,.F.); +#4727 = PLANE('',#4728); +#4728 = AXIS2_PLACEMENT_3D('',#4729,#4730,#4731); +#4729 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#4730 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473) + ); +#4731 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#4732 = ADVANCED_FACE('',(#4733),#4760,.T.); +#4733 = FACE_BOUND('',#4734,.F.); +#4734 = EDGE_LOOP('',(#4735,#4743,#4751,#4757,#4758,#4759)); +#4735 = ORIENTED_EDGE('',*,*,#4736,.F.); +#4736 = EDGE_CURVE('',#4737,#4660,#4739,.T.); +#4737 = VERTEX_POINT('',#4738); +#4738 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#4739 = LINE('',#4740,#4741); +#4740 = CARTESIAN_POINT('',(5.24881689775,0.270752273427,-3.27118310225) + ); +#4741 = VECTOR('',#4742,1.); +#4742 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#4743 = ORIENTED_EDGE('',*,*,#4744,.T.); +#4744 = EDGE_CURVE('',#4737,#4745,#4747,.T.); +#4745 = VERTEX_POINT('',#4746); +#4746 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#4747 = LINE('',#4748,#4749); +#4748 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#4749 = VECTOR('',#4750,1.); +#4750 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4751 = ORIENTED_EDGE('',*,*,#4752,.T.); +#4752 = EDGE_CURVE('',#4745,#4712,#4753,.T.); +#4753 = LINE('',#4754,#4755); +#4754 = CARTESIAN_POINT('',(5.155697812072,-0.150503562587, + -3.364302187928)); +#4755 = VECTOR('',#4756,1.); +#4756 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#4757 = ORIENTED_EDGE('',*,*,#4711,.T.); +#4758 = ORIENTED_EDGE('',*,*,#3980,.F.); +#4759 = ORIENTED_EDGE('',*,*,#4667,.F.); +#4760 = PLANE('',#4761); +#4761 = AXIS2_PLACEMENT_3D('',#4762,#4763,#4764); +#4762 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#4763 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4764 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#4765 = ADVANCED_FACE('',(#4766),#4772,.F.); +#4766 = FACE_BOUND('',#4767,.F.); +#4767 = EDGE_LOOP('',(#4768,#4769,#4770,#4771)); +#4768 = ORIENTED_EDGE('',*,*,#4061,.T.); +#4769 = ORIENTED_EDGE('',*,*,#4133,.F.); +#4770 = ORIENTED_EDGE('',*,*,#4109,.F.); +#4771 = ORIENTED_EDGE('',*,*,#4094,.T.); +#4772 = PLANE('',#4773); +#4773 = AXIS2_PLACEMENT_3D('',#4774,#4775,#4776); +#4774 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#4775 = DIRECTION('',(-0.,0.,-1.)); +#4776 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4777 = ADVANCED_FACE('',(#4778),#4784,.F.); +#4778 = FACE_BOUND('',#4779,.F.); +#4779 = EDGE_LOOP('',(#4780,#4781,#4782,#4783)); +#4780 = ORIENTED_EDGE('',*,*,#4157,.T.); +#4781 = ORIENTED_EDGE('',*,*,#4229,.F.); +#4782 = ORIENTED_EDGE('',*,*,#4205,.F.); +#4783 = ORIENTED_EDGE('',*,*,#4190,.T.); +#4784 = PLANE('',#4785); +#4785 = AXIS2_PLACEMENT_3D('',#4786,#4787,#4788); +#4786 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#4787 = DIRECTION('',(-0.,0.,-1.)); +#4788 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4789 = ADVANCED_FACE('',(#4790),#4796,.F.); +#4790 = FACE_BOUND('',#4791,.F.); +#4791 = EDGE_LOOP('',(#4792,#4793,#4794,#4795)); +#4792 = ORIENTED_EDGE('',*,*,#4325,.F.); +#4793 = ORIENTED_EDGE('',*,*,#4301,.F.); +#4794 = ORIENTED_EDGE('',*,*,#4286,.T.); +#4795 = ORIENTED_EDGE('',*,*,#4253,.T.); +#4796 = PLANE('',#4797); +#4797 = AXIS2_PLACEMENT_3D('',#4798,#4799,#4800); +#4798 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#4799 = DIRECTION('',(-0.,0.,-1.)); +#4800 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4801 = ADVANCED_FACE('',(#4802),#4813,.T.); +#4802 = FACE_BOUND('',#4803,.T.); +#4803 = EDGE_LOOP('',(#4804,#4805,#4811,#4812)); +#4804 = ORIENTED_EDGE('',*,*,#4474,.F.); +#4805 = ORIENTED_EDGE('',*,*,#4806,.T.); +#4806 = EDGE_CURVE('',#4475,#4342,#4807,.T.); +#4807 = LINE('',#4808,#4809); +#4808 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#4809 = VECTOR('',#4810,1.); +#4810 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4811 = ORIENTED_EDGE('',*,*,#4341,.T.); +#4812 = ORIENTED_EDGE('',*,*,#4397,.F.); +#4813 = PLANE('',#4814); +#4814 = AXIS2_PLACEMENT_3D('',#4815,#4816,#4817); +#4815 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#4816 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#4817 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#4818 = ADVANCED_FACE('',(#4819),#4830,.F.); +#4819 = FACE_BOUND('',#4820,.F.); +#4820 = EDGE_LOOP('',(#4821,#4822,#4823,#4829)); +#4821 = ORIENTED_EDGE('',*,*,#4806,.T.); +#4822 = ORIENTED_EDGE('',*,*,#4351,.T.); +#4823 = ORIENTED_EDGE('',*,*,#4824,.F.); +#4824 = EDGE_CURVE('',#4483,#4352,#4825,.T.); +#4825 = LINE('',#4826,#4827); +#4826 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#4827 = VECTOR('',#4828,1.); +#4828 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4829 = ORIENTED_EDGE('',*,*,#4482,.F.); +#4830 = PLANE('',#4831); +#4831 = AXIS2_PLACEMENT_3D('',#4832,#4833,#4834); +#4832 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#4833 = DIRECTION('',(0.,0.,1.)); +#4834 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4835 = ADVANCED_FACE('',(#4836),#4842,.T.); +#4836 = FACE_BOUND('',#4837,.F.); +#4837 = EDGE_LOOP('',(#4838,#4839,#4840,#4841)); +#4838 = ORIENTED_EDGE('',*,*,#4490,.F.); +#4839 = ORIENTED_EDGE('',*,*,#4824,.T.); +#4840 = ORIENTED_EDGE('',*,*,#4359,.T.); +#4841 = ORIENTED_EDGE('',*,*,#4457,.F.); +#4842 = PLANE('',#4843); +#4843 = AXIS2_PLACEMENT_3D('',#4844,#4845,#4846); +#4844 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#4845 = DIRECTION('',(-9.310387150808E-17,-0.760250805153,-0.64962967394 + )); +#4846 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#4847 = ADVANCED_FACE('',(#4848),#4854,.F.); +#4848 = FACE_BOUND('',#4849,.F.); +#4849 = EDGE_LOOP('',(#4850,#4851,#4852,#4853)); +#4850 = ORIENTED_EDGE('',*,*,#4570,.F.); +#4851 = ORIENTED_EDGE('',*,*,#4587,.T.); +#4852 = ORIENTED_EDGE('',*,*,#4515,.T.); +#4853 = ORIENTED_EDGE('',*,*,#4546,.F.); +#4854 = PLANE('',#4855); +#4855 = AXIS2_PLACEMENT_3D('',#4856,#4857,#4858); +#4856 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#4857 = DIRECTION('',(0.,0.,1.)); +#4858 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4859 = ADVANCED_FACE('',(#4860),#4871,.T.); +#4860 = FACE_BOUND('',#4861,.T.); +#4861 = EDGE_LOOP('',(#4862,#4863,#4869,#4870)); +#4862 = ORIENTED_EDGE('',*,*,#4736,.F.); +#4863 = ORIENTED_EDGE('',*,*,#4864,.T.); +#4864 = EDGE_CURVE('',#4737,#4604,#4865,.T.); +#4865 = LINE('',#4866,#4867); +#4866 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#4867 = VECTOR('',#4868,1.); +#4868 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4869 = ORIENTED_EDGE('',*,*,#4603,.T.); +#4870 = ORIENTED_EDGE('',*,*,#4659,.F.); +#4871 = PLANE('',#4872); +#4872 = AXIS2_PLACEMENT_3D('',#4873,#4874,#4875); +#4873 = CARTESIAN_POINT('',(5.32,0.235596257347,-3.301223703467)); +#4874 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#4875 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#4876 = ADVANCED_FACE('',(#4877),#4888,.F.); +#4877 = FACE_BOUND('',#4878,.F.); +#4878 = EDGE_LOOP('',(#4879,#4880,#4881,#4887)); +#4879 = ORIENTED_EDGE('',*,*,#4864,.T.); +#4880 = ORIENTED_EDGE('',*,*,#4613,.T.); +#4881 = ORIENTED_EDGE('',*,*,#4882,.F.); +#4882 = EDGE_CURVE('',#4745,#4614,#4883,.T.); +#4883 = LINE('',#4884,#4885); +#4884 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#4885 = VECTOR('',#4886,1.); +#4886 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4887 = ORIENTED_EDGE('',*,*,#4744,.F.); +#4888 = PLANE('',#4889); +#4889 = AXIS2_PLACEMENT_3D('',#4890,#4891,#4892); +#4890 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#4891 = DIRECTION('',(0.,0.,1.)); +#4892 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4893 = ADVANCED_FACE('',(#4894),#4900,.T.); +#4894 = FACE_BOUND('',#4895,.F.); +#4895 = EDGE_LOOP('',(#4896,#4897,#4898,#4899)); +#4896 = ORIENTED_EDGE('',*,*,#4752,.F.); +#4897 = ORIENTED_EDGE('',*,*,#4882,.T.); +#4898 = ORIENTED_EDGE('',*,*,#4621,.T.); +#4899 = ORIENTED_EDGE('',*,*,#4719,.F.); +#4900 = PLANE('',#4901); +#4901 = AXIS2_PLACEMENT_3D('',#4902,#4903,#4904); +#4902 = CARTESIAN_POINT('',(5.32,-0.204403742653,-3.301223703467)); +#4903 = DIRECTION('',(-9.310387150808E-17,-0.760250805153,-0.64962967394 + )); +#4904 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#4905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4909)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4906,#4907,#4908)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4906 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4907 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4908 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4909 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4906, + 'distance_accuracy_value','confusion accuracy'); +#4910 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4911,#4913); +#4911 = ( REPRESENTATION_RELATIONSHIP('','',#1383,#1360) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4912) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4912 = ITEM_DEFINED_TRANSFORMATION('','',#11,#1361); +#4913 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4914); +#4914 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','=>[0:1:1:5]','',#1355,#1378, + $); +#4915 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1380)); +#4916 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4917,#4919); +#4917 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4918) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4918 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23); +#4919 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4920); +#4920 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','Rigb','',#5,#523,$); +#4921 = SHAPE_DEFINITION_REPRESENTATION(#4922,#4928); +#4922 = PRODUCT_DEFINITION_SHAPE('','',#4923); +#4923 = PRODUCT_DEFINITION('design','',#4924,#4927); +#4924 = PRODUCT_DEFINITION_FORMATION('','',#4925); +#4925 = PRODUCT('D_SMA','D_SMA','',(#4926)); +#4926 = PRODUCT_CONTEXT('',#2,'mechanical'); +#4927 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#4928 = SHAPE_REPRESENTATION('',(#11,#4929),#4933); +#4929 = AXIS2_PLACEMENT_3D('',#4930,#4931,#4932); +#4930 = CARTESIAN_POINT('',(0.,0.,0.)); +#4931 = DIRECTION('',(0.,0.,1.)); +#4932 = DIRECTION('',(1.,0.,-0.)); +#4933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4937)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4934,#4935,#4936)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4934 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4935 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4936 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4937 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4934, + 'distance_accuracy_value','confusion accuracy'); +#4938 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4939,#4941); +#4939 = ( REPRESENTATION_RELATIONSHIP('','',#4928,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4940) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4940 = ITEM_DEFINED_TRANSFORMATION('','',#11,#27); +#4941 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4942); +#4942 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','Dbk','',#5,#4923,$); +#4943 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#4925)); +#4944 = SHAPE_DEFINITION_REPRESENTATION(#4945,#4951); +#4945 = PRODUCT_DEFINITION_SHAPE('','',#4946); +#4946 = PRODUCT_DEFINITION('design','',#4947,#4950); +#4947 = PRODUCT_DEFINITION_FORMATION('','',#4948); +#4948 = PRODUCT('D_SMA','D_SMA','',(#4949)); +#4949 = PRODUCT_CONTEXT('',#2,'mechanical'); +#4950 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#4951 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#4952),#6160); +#4952 = MANIFOLD_SOLID_BREP('',#4953); +#4953 = CLOSED_SHELL('',(#4954,#4994,#5077,#5102,#5177,#5194,#5211,#5228 + ,#5245,#5262,#5278,#5325,#5360,#5399,#5428,#5467,#5496,#5550,#5593, + #5616,#5639,#5662,#5713,#5736,#5753,#5827,#5851,#5918,#5930,#5942, + #5959,#5988,#6011,#6034,#6051,#6073,#6085,#6102,#6119,#6136,#6148)); +#4954 = ADVANCED_FACE('',(#4955),#4989,.T.); +#4955 = FACE_BOUND('',#4956,.T.); +#4956 = EDGE_LOOP('',(#4957,#4967,#4975,#4983)); +#4957 = ORIENTED_EDGE('',*,*,#4958,.T.); +#4958 = EDGE_CURVE('',#4959,#4961,#4963,.T.); +#4959 = VERTEX_POINT('',#4960); +#4960 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#4961 = VERTEX_POINT('',#4962); +#4962 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4963 = LINE('',#4964,#4965); +#4964 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#4965 = VECTOR('',#4966,1.); +#4966 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4967 = ORIENTED_EDGE('',*,*,#4968,.T.); +#4968 = EDGE_CURVE('',#4961,#4969,#4971,.T.); +#4969 = VERTEX_POINT('',#4970); +#4970 = CARTESIAN_POINT('',(2.353333333333,-0.75,-2.775557561563E-17)); +#4971 = LINE('',#4972,#4973); +#4972 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4973 = VECTOR('',#4974,1.); +#4974 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4975 = ORIENTED_EDGE('',*,*,#4976,.T.); +#4976 = EDGE_CURVE('',#4969,#4977,#4979,.T.); +#4977 = VERTEX_POINT('',#4978); +#4978 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4979 = LINE('',#4980,#4981); +#4980 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4981 = VECTOR('',#4982,1.); +#4982 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4983 = ORIENTED_EDGE('',*,*,#4984,.T.); +#4984 = EDGE_CURVE('',#4977,#4959,#4985,.T.); +#4985 = LINE('',#4986,#4987); +#4986 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4987 = VECTOR('',#4988,1.); +#4988 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4989 = PLANE('',#4990); +#4990 = AXIS2_PLACEMENT_3D('',#4991,#4992,#4993); +#4991 = CARTESIAN_POINT('',(1.746666666667,-5.821951347626E-16, + -7.671995716851E-18)); +#4992 = DIRECTION('',(-1.332277103521E-17,5.237186372803E-33,-1.)); +#4993 = DIRECTION('',(1.,-2.22044604925E-16,-1.332277103521E-17)); +#4994 = ADVANCED_FACE('',(#4995),#5072,.T.); +#4995 = FACE_BOUND('',#4996,.T.); +#4996 = EDGE_LOOP('',(#4997,#5007,#5014,#5015,#5023,#5031,#5041,#5049, + #5057,#5065)); +#4997 = ORIENTED_EDGE('',*,*,#4998,.F.); +#4998 = EDGE_CURVE('',#4999,#5001,#5003,.T.); +#4999 = VERTEX_POINT('',#5000); +#5000 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#5001 = VERTEX_POINT('',#5002); +#5002 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#5003 = LINE('',#5004,#5005); +#5004 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#5005 = VECTOR('',#5006,1.); +#5006 = DIRECTION('',(0.,0.,1.)); +#5007 = ORIENTED_EDGE('',*,*,#5008,.T.); +#5008 = EDGE_CURVE('',#4999,#4961,#5009,.T.); +#5009 = CIRCLE('',#5010,0.146666666667); +#5010 = AXIS2_PLACEMENT_3D('',#5011,#5012,#5013); +#5011 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#5012 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#5013 = DIRECTION('',(0.,0.,1.)); +#5014 = ORIENTED_EDGE('',*,*,#4958,.F.); +#5015 = ORIENTED_EDGE('',*,*,#5016,.T.); +#5016 = EDGE_CURVE('',#4959,#5017,#5019,.T.); +#5017 = VERTEX_POINT('',#5018); +#5018 = CARTESIAN_POINT('',(1.14,0.75,0.22)); +#5019 = LINE('',#5020,#5021); +#5020 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#5021 = VECTOR('',#5022,1.); +#5022 = DIRECTION('',(0.,0.,1.)); +#5023 = ORIENTED_EDGE('',*,*,#5024,.F.); +#5024 = EDGE_CURVE('',#5025,#5017,#5027,.T.); +#5025 = VERTEX_POINT('',#5026); +#5026 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#5027 = LINE('',#5028,#5029); +#5028 = CARTESIAN_POINT('',(2.108163247245,0.75,0.22)); +#5029 = VECTOR('',#5030,1.); +#5030 = DIRECTION('',(-1.,4.514825988711E-16,0.)); +#5031 = ORIENTED_EDGE('',*,*,#5032,.T.); +#5032 = EDGE_CURVE('',#5025,#5033,#5035,.T.); +#5033 = VERTEX_POINT('',#5034); +#5034 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#5035 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5036,#5037,#5038,#5039,#5040), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5036 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#5037 = CARTESIAN_POINT('',(2.238768685756,0.75,0.412247910026)); +#5038 = CARTESIAN_POINT('',(2.25227825666,0.75,0.604499093572)); +#5039 = CARTESIAN_POINT('',(2.265788033788,0.75,0.796753211837)); +#5040 = CARTESIAN_POINT('',(2.279297998531,0.75,0.98901)); +#5041 = ORIENTED_EDGE('',*,*,#5042,.T.); +#5042 = EDGE_CURVE('',#5033,#5043,#5045,.T.); +#5043 = VERTEX_POINT('',#5044); +#5044 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#5045 = LINE('',#5046,#5047); +#5046 = CARTESIAN_POINT('',(1.14,0.75,0.2222)); +#5047 = VECTOR('',#5048,1.); +#5048 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5049 = ORIENTED_EDGE('',*,*,#5050,.T.); +#5050 = EDGE_CURVE('',#5043,#5051,#5053,.T.); +#5051 = VERTEX_POINT('',#5052); +#5052 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#5053 = LINE('',#5054,#5055); +#5054 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#5055 = VECTOR('',#5056,1.); +#5056 = DIRECTION('',(0.,0.,1.)); +#5057 = ORIENTED_EDGE('',*,*,#5058,.T.); +#5058 = EDGE_CURVE('',#5051,#5059,#5061,.T.); +#5059 = VERTEX_POINT('',#5060); +#5060 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#5061 = LINE('',#5062,#5063); +#5062 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#5063 = VECTOR('',#5064,1.); +#5064 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5065 = ORIENTED_EDGE('',*,*,#5066,.F.); +#5066 = EDGE_CURVE('',#5001,#5059,#5067,.T.); +#5067 = CIRCLE('',#5068,0.146666666667); +#5068 = AXIS2_PLACEMENT_3D('',#5069,#5070,#5071); +#5069 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#5070 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5071 = DIRECTION('',(0.,0.,1.)); +#5072 = PLANE('',#5073); +#5073 = AXIS2_PLACEMENT_3D('',#5074,#5075,#5076); +#5074 = CARTESIAN_POINT('',(1.991067149606,0.75,0.303091083877)); +#5075 = DIRECTION('',(4.514825988711E-16,1.,5.822139933717E-17)); +#5076 = DIRECTION('',(-1.,4.514825988711E-16,-4.641550743593E-49)); +#5077 = ADVANCED_FACE('',(#5078),#5097,.T.); +#5078 = FACE_BOUND('',#5079,.T.); +#5079 = EDGE_LOOP('',(#5080,#5088,#5095,#5096)); +#5080 = ORIENTED_EDGE('',*,*,#5081,.T.); +#5081 = EDGE_CURVE('',#4999,#5082,#5084,.T.); +#5082 = VERTEX_POINT('',#5083); +#5083 = CARTESIAN_POINT('',(2.5,-0.75,0.146666666667)); +#5084 = LINE('',#5085,#5086); +#5085 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#5086 = VECTOR('',#5087,1.); +#5087 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5088 = ORIENTED_EDGE('',*,*,#5089,.T.); +#5089 = EDGE_CURVE('',#5082,#4969,#5090,.T.); +#5090 = CIRCLE('',#5091,0.146666666667); +#5091 = AXIS2_PLACEMENT_3D('',#5092,#5093,#5094); +#5092 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.146666666667)); +#5093 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#5094 = DIRECTION('',(0.,0.,1.)); +#5095 = ORIENTED_EDGE('',*,*,#4968,.F.); +#5096 = ORIENTED_EDGE('',*,*,#5008,.F.); +#5097 = CYLINDRICAL_SURFACE('',#5098,0.146666666667); +#5098 = AXIS2_PLACEMENT_3D('',#5099,#5100,#5101); +#5099 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#5100 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5101 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5102 = ADVANCED_FACE('',(#5103),#5172,.T.); +#5103 = FACE_BOUND('',#5104,.T.); +#5104 = EDGE_LOOP('',(#5105,#5106,#5114,#5123,#5131,#5139,#5147,#5157, + #5165,#5171)); +#5105 = ORIENTED_EDGE('',*,*,#5089,.F.); +#5106 = ORIENTED_EDGE('',*,*,#5107,.T.); +#5107 = EDGE_CURVE('',#5082,#5108,#5110,.T.); +#5108 = VERTEX_POINT('',#5109); +#5109 = CARTESIAN_POINT('',(2.5,-0.75,0.842343333333)); +#5110 = LINE('',#5111,#5112); +#5111 = CARTESIAN_POINT('',(2.5,-0.75,0.)); +#5112 = VECTOR('',#5113,1.); +#5113 = DIRECTION('',(0.,0.,1.)); +#5114 = ORIENTED_EDGE('',*,*,#5115,.T.); +#5115 = EDGE_CURVE('',#5108,#5116,#5118,.T.); +#5116 = VERTEX_POINT('',#5117); +#5117 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.98901)); +#5118 = CIRCLE('',#5119,0.146666666667); +#5119 = AXIS2_PLACEMENT_3D('',#5120,#5121,#5122); +#5120 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.842343333333)); +#5121 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5122 = DIRECTION('',(0.,0.,1.)); +#5123 = ORIENTED_EDGE('',*,*,#5124,.T.); +#5124 = EDGE_CURVE('',#5116,#5125,#5127,.T.); +#5125 = VERTEX_POINT('',#5126); +#5126 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#5127 = LINE('',#5128,#5129); +#5128 = CARTESIAN_POINT('',(2.5,-0.75,0.98901)); +#5129 = VECTOR('',#5130,1.); +#5130 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5131 = ORIENTED_EDGE('',*,*,#5132,.F.); +#5132 = EDGE_CURVE('',#5133,#5125,#5135,.T.); +#5133 = VERTEX_POINT('',#5134); +#5134 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#5135 = LINE('',#5136,#5137); +#5136 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#5137 = VECTOR('',#5138,1.); +#5138 = DIRECTION('',(0.,0.,1.)); +#5139 = ORIENTED_EDGE('',*,*,#5140,.T.); +#5140 = EDGE_CURVE('',#5133,#5141,#5143,.T.); +#5141 = VERTEX_POINT('',#5142); +#5142 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#5143 = LINE('',#5144,#5145); +#5144 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#5145 = VECTOR('',#5146,1.); +#5146 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5147 = ORIENTED_EDGE('',*,*,#5148,.F.); +#5148 = EDGE_CURVE('',#5149,#5141,#5151,.T.); +#5149 = VERTEX_POINT('',#5150); +#5150 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#5151 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5152,#5153,#5154,#5155,#5156), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5152 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#5153 = CARTESIAN_POINT('',(2.238768685756,-0.75,0.412247910026)); +#5154 = CARTESIAN_POINT('',(2.25227825666,-0.75,0.604499093572)); +#5155 = CARTESIAN_POINT('',(2.265788033788,-0.75,0.796753211837)); +#5156 = CARTESIAN_POINT('',(2.279297998531,-0.75,0.98901)); +#5157 = ORIENTED_EDGE('',*,*,#5158,.F.); +#5158 = EDGE_CURVE('',#5159,#5149,#5161,.T.); +#5159 = VERTEX_POINT('',#5160); +#5160 = CARTESIAN_POINT('',(1.14,-0.75,0.22)); +#5161 = LINE('',#5162,#5163); +#5162 = CARTESIAN_POINT('',(2.108163247245,-0.75,0.22)); +#5163 = VECTOR('',#5164,1.); +#5164 = DIRECTION('',(1.,-2.844998265321E-16,-0.)); +#5165 = ORIENTED_EDGE('',*,*,#5166,.F.); +#5166 = EDGE_CURVE('',#4977,#5159,#5167,.T.); +#5167 = LINE('',#5168,#5169); +#5168 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#5169 = VECTOR('',#5170,1.); +#5170 = DIRECTION('',(0.,0.,1.)); +#5171 = ORIENTED_EDGE('',*,*,#4976,.F.); +#5172 = PLANE('',#5173); +#5173 = AXIS2_PLACEMENT_3D('',#5174,#5175,#5176); +#5174 = CARTESIAN_POINT('',(1.991067149606,-0.75,0.303091083877)); +#5175 = DIRECTION('',(-2.844998265321E-16,-1.,-7.396066644327E-17)); +#5176 = DIRECTION('',(1.642256696039E-32,7.396066644327E-17,-1.)); +#5177 = ADVANCED_FACE('',(#5178),#5189,.T.); +#5178 = FACE_BOUND('',#5179,.T.); +#5179 = EDGE_LOOP('',(#5180,#5181,#5182,#5188)); +#5180 = ORIENTED_EDGE('',*,*,#4984,.F.); +#5181 = ORIENTED_EDGE('',*,*,#5166,.T.); +#5182 = ORIENTED_EDGE('',*,*,#5183,.F.); +#5183 = EDGE_CURVE('',#5017,#5159,#5184,.T.); +#5184 = LINE('',#5185,#5186); +#5185 = CARTESIAN_POINT('',(1.14,-1.022629672442,0.22)); +#5186 = VECTOR('',#5187,1.); +#5187 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5188 = ORIENTED_EDGE('',*,*,#5016,.F.); +#5189 = PLANE('',#5190); +#5190 = AXIS2_PLACEMENT_3D('',#5191,#5192,#5193); +#5191 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#5192 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5193 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5194 = ADVANCED_FACE('',(#5195),#5206,.T.); +#5195 = FACE_BOUND('',#5196,.T.); +#5196 = EDGE_LOOP('',(#5197,#5198,#5204,#5205)); +#5197 = ORIENTED_EDGE('',*,*,#4998,.T.); +#5198 = ORIENTED_EDGE('',*,*,#5199,.T.); +#5199 = EDGE_CURVE('',#5001,#5108,#5200,.T.); +#5200 = LINE('',#5201,#5202); +#5201 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#5202 = VECTOR('',#5203,1.); +#5203 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5204 = ORIENTED_EDGE('',*,*,#5107,.F.); +#5205 = ORIENTED_EDGE('',*,*,#5081,.F.); +#5206 = PLANE('',#5207); +#5207 = AXIS2_PLACEMENT_3D('',#5208,#5209,#5210); +#5208 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#5209 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5210 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5211 = ADVANCED_FACE('',(#5212),#5223,.T.); +#5212 = FACE_BOUND('',#5213,.T.); +#5213 = EDGE_LOOP('',(#5214,#5215,#5221,#5222)); +#5214 = ORIENTED_EDGE('',*,*,#5066,.T.); +#5215 = ORIENTED_EDGE('',*,*,#5216,.T.); +#5216 = EDGE_CURVE('',#5059,#5116,#5217,.T.); +#5217 = LINE('',#5218,#5219); +#5218 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#5219 = VECTOR('',#5220,1.); +#5220 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5221 = ORIENTED_EDGE('',*,*,#5115,.F.); +#5222 = ORIENTED_EDGE('',*,*,#5199,.F.); +#5223 = CYLINDRICAL_SURFACE('',#5224,0.146666666667); +#5224 = AXIS2_PLACEMENT_3D('',#5225,#5226,#5227); +#5225 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#5226 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5227 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5228 = ADVANCED_FACE('',(#5229),#5240,.F.); +#5229 = FACE_BOUND('',#5230,.F.); +#5230 = EDGE_LOOP('',(#5231,#5232,#5233,#5234)); +#5231 = ORIENTED_EDGE('',*,*,#5058,.T.); +#5232 = ORIENTED_EDGE('',*,*,#5216,.T.); +#5233 = ORIENTED_EDGE('',*,*,#5124,.T.); +#5234 = ORIENTED_EDGE('',*,*,#5235,.T.); +#5235 = EDGE_CURVE('',#5125,#5051,#5236,.T.); +#5236 = LINE('',#5237,#5238); +#5237 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#5238 = VECTOR('',#5239,1.); +#5239 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5240 = PLANE('',#5241); +#5241 = AXIS2_PLACEMENT_3D('',#5242,#5243,#5244); +#5242 = CARTESIAN_POINT('',(2.39,-6.661338147751E-16,0.98901)); +#5243 = DIRECTION('',(0.,0.,-1.)); +#5244 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5245 = ADVANCED_FACE('',(#5246),#5257,.T.); +#5246 = FACE_BOUND('',#5247,.T.); +#5247 = EDGE_LOOP('',(#5248,#5254,#5255,#5256)); +#5248 = ORIENTED_EDGE('',*,*,#5249,.T.); +#5249 = EDGE_CURVE('',#5043,#5133,#5250,.T.); +#5250 = LINE('',#5251,#5252); +#5251 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#5252 = VECTOR('',#5253,1.); +#5253 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5254 = ORIENTED_EDGE('',*,*,#5132,.T.); +#5255 = ORIENTED_EDGE('',*,*,#5235,.T.); +#5256 = ORIENTED_EDGE('',*,*,#5050,.F.); +#5257 = PLANE('',#5258); +#5258 = AXIS2_PLACEMENT_3D('',#5259,#5260,#5261); +#5259 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#5260 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5261 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5262 = ADVANCED_FACE('',(#5263),#5273,.F.); +#5263 = FACE_BOUND('',#5264,.F.); +#5264 = EDGE_LOOP('',(#5265,#5270,#5271,#5272)); +#5265 = ORIENTED_EDGE('',*,*,#5266,.F.); +#5266 = EDGE_CURVE('',#5033,#5141,#5267,.T.); +#5267 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5268,#5269),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5268 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#5269 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#5270 = ORIENTED_EDGE('',*,*,#5042,.T.); +#5271 = ORIENTED_EDGE('',*,*,#5249,.T.); +#5272 = ORIENTED_EDGE('',*,*,#5140,.T.); +#5273 = PLANE('',#5274); +#5274 = AXIS2_PLACEMENT_3D('',#5275,#5276,#5277); +#5275 = CARTESIAN_POINT('',(1.71,-5.551115123126E-16,0.2222)); +#5276 = DIRECTION('',(0.,0.,-1.)); +#5277 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5278 = ADVANCED_FACE('',(#5279),#5320,.T.); +#5279 = FACE_BOUND('',#5280,.T.); +#5280 = EDGE_LOOP('',(#5281,#5290,#5296,#5297,#5298,#5299,#5307,#5314)); +#5281 = ORIENTED_EDGE('',*,*,#5282,.F.); +#5282 = EDGE_CURVE('',#5283,#5285,#5287,.T.); +#5283 = VERTEX_POINT('',#5284); +#5284 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5285 = VERTEX_POINT('',#5286); +#5286 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5287 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5288,#5289),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5288 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5289 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5290 = ORIENTED_EDGE('',*,*,#5291,.T.); +#5291 = EDGE_CURVE('',#5283,#5149,#5292,.T.); +#5292 = LINE('',#5293,#5294); +#5293 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5294 = VECTOR('',#5295,1.); +#5295 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5296 = ORIENTED_EDGE('',*,*,#5148,.T.); +#5297 = ORIENTED_EDGE('',*,*,#5266,.F.); +#5298 = ORIENTED_EDGE('',*,*,#5032,.F.); +#5299 = ORIENTED_EDGE('',*,*,#5300,.T.); +#5300 = EDGE_CURVE('',#5025,#5301,#5303,.T.); +#5301 = VERTEX_POINT('',#5302); +#5302 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5303 = LINE('',#5304,#5305); +#5304 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5305 = VECTOR('',#5306,1.); +#5306 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5307 = ORIENTED_EDGE('',*,*,#5308,.T.); +#5308 = EDGE_CURVE('',#5301,#5309,#5311,.T.); +#5309 = VERTEX_POINT('',#5310); +#5310 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5311 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5312,#5313),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5312 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5313 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5314 = ORIENTED_EDGE('',*,*,#5315,.F.); +#5315 = EDGE_CURVE('',#5285,#5309,#5316,.T.); +#5316 = LINE('',#5317,#5318); +#5317 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5318 = VECTOR('',#5319,1.); +#5319 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5320 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5321,#5322) + ,(#5323,#5324 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5321 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5322 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5323 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5324 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5325 = ADVANCED_FACE('',(#5326),#5355,.T.); +#5326 = FACE_BOUND('',#5327,.T.); +#5327 = EDGE_LOOP('',(#5328,#5329,#5337,#5345,#5351,#5352,#5353,#5354)); +#5328 = ORIENTED_EDGE('',*,*,#5291,.F.); +#5329 = ORIENTED_EDGE('',*,*,#5330,.F.); +#5330 = EDGE_CURVE('',#5331,#5283,#5333,.T.); +#5331 = VERTEX_POINT('',#5332); +#5332 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5333 = LINE('',#5334,#5335); +#5334 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5335 = VECTOR('',#5336,1.); +#5336 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5337 = ORIENTED_EDGE('',*,*,#5338,.T.); +#5338 = EDGE_CURVE('',#5331,#5339,#5341,.T.); +#5339 = VERTEX_POINT('',#5340); +#5340 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5341 = LINE('',#5342,#5343); +#5342 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5343 = VECTOR('',#5344,1.); +#5344 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5345 = ORIENTED_EDGE('',*,*,#5346,.F.); +#5346 = EDGE_CURVE('',#5301,#5339,#5347,.T.); +#5347 = LINE('',#5348,#5349); +#5348 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5349 = VECTOR('',#5350,1.); +#5350 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5351 = ORIENTED_EDGE('',*,*,#5300,.F.); +#5352 = ORIENTED_EDGE('',*,*,#5024,.T.); +#5353 = ORIENTED_EDGE('',*,*,#5183,.T.); +#5354 = ORIENTED_EDGE('',*,*,#5158,.T.); +#5355 = PLANE('',#5356); +#5356 = AXIS2_PLACEMENT_3D('',#5357,#5358,#5359); +#5357 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5358 = DIRECTION('',(0.,0.,-1.)); +#5359 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#5360 = ADVANCED_FACE('',(#5361),#5394,.T.); +#5361 = FACE_BOUND('',#5362,.T.); +#5362 = EDGE_LOOP('',(#5363,#5373,#5379,#5380,#5381,#5389)); +#5363 = ORIENTED_EDGE('',*,*,#5364,.T.); +#5364 = EDGE_CURVE('',#5365,#5367,#5369,.T.); +#5365 = VERTEX_POINT('',#5366); +#5366 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5367 = VERTEX_POINT('',#5368); +#5368 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5369 = LINE('',#5370,#5371); +#5370 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5371 = VECTOR('',#5372,1.); +#5372 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5373 = ORIENTED_EDGE('',*,*,#5374,.T.); +#5374 = EDGE_CURVE('',#5367,#5331,#5375,.T.); +#5375 = LINE('',#5376,#5377); +#5376 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5377 = VECTOR('',#5378,1.); +#5378 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5379 = ORIENTED_EDGE('',*,*,#5330,.T.); +#5380 = ORIENTED_EDGE('',*,*,#5282,.T.); +#5381 = ORIENTED_EDGE('',*,*,#5382,.F.); +#5382 = EDGE_CURVE('',#5383,#5285,#5385,.T.); +#5383 = VERTEX_POINT('',#5384); +#5384 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5385 = LINE('',#5386,#5387); +#5386 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5387 = VECTOR('',#5388,1.); +#5388 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5389 = ORIENTED_EDGE('',*,*,#5390,.F.); +#5390 = EDGE_CURVE('',#5365,#5383,#5391,.T.); +#5391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5392,#5393),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5392 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5393 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5394 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5395,#5396) + ,(#5397,#5398 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5395 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5396 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5397 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5398 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5399 = ADVANCED_FACE('',(#5400),#5423,.T.); +#5400 = FACE_BOUND('',#5401,.T.); +#5401 = EDGE_LOOP('',(#5402,#5403,#5410,#5418)); +#5402 = ORIENTED_EDGE('',*,*,#5315,.T.); +#5403 = ORIENTED_EDGE('',*,*,#5404,.T.); +#5404 = EDGE_CURVE('',#5309,#5405,#5407,.T.); +#5405 = VERTEX_POINT('',#5406); +#5406 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5407 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5408,#5409),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5408 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5409 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5410 = ORIENTED_EDGE('',*,*,#5411,.F.); +#5411 = EDGE_CURVE('',#5412,#5405,#5414,.T.); +#5412 = VERTEX_POINT('',#5413); +#5413 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5414 = LINE('',#5415,#5416); +#5415 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5416 = VECTOR('',#5417,1.); +#5417 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5418 = ORIENTED_EDGE('',*,*,#5419,.F.); +#5419 = EDGE_CURVE('',#5285,#5412,#5420,.T.); +#5420 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5421,#5422),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5421 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5422 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5423 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5424,#5425) + ,(#5426,#5427 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5424 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5425 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5426 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5427 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5428 = ADVANCED_FACE('',(#5429),#5462,.T.); +#5429 = FACE_BOUND('',#5430,.T.); +#5430 = EDGE_LOOP('',(#5431,#5432,#5440,#5448,#5455,#5461)); +#5431 = ORIENTED_EDGE('',*,*,#5346,.T.); +#5432 = ORIENTED_EDGE('',*,*,#5433,.T.); +#5433 = EDGE_CURVE('',#5339,#5434,#5436,.T.); +#5434 = VERTEX_POINT('',#5435); +#5435 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5436 = LINE('',#5437,#5438); +#5437 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5438 = VECTOR('',#5439,1.); +#5439 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5440 = ORIENTED_EDGE('',*,*,#5441,.T.); +#5441 = EDGE_CURVE('',#5434,#5442,#5444,.T.); +#5442 = VERTEX_POINT('',#5443); +#5443 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5444 = LINE('',#5445,#5446); +#5445 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5446 = VECTOR('',#5447,1.); +#5447 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5448 = ORIENTED_EDGE('',*,*,#5449,.T.); +#5449 = EDGE_CURVE('',#5442,#5450,#5452,.T.); +#5450 = VERTEX_POINT('',#5451); +#5451 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5453,#5454),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5453 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5454 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5455 = ORIENTED_EDGE('',*,*,#5456,.F.); +#5456 = EDGE_CURVE('',#5309,#5450,#5457,.T.); +#5457 = LINE('',#5458,#5459); +#5458 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5459 = VECTOR('',#5460,1.); +#5460 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5461 = ORIENTED_EDGE('',*,*,#5308,.F.); +#5462 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5463,#5464) + ,(#5465,#5466 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5463 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5464 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5465 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5466 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5467 = ADVANCED_FACE('',(#5468),#5491,.T.); +#5468 = FACE_BOUND('',#5469,.T.); +#5469 = EDGE_LOOP('',(#5470,#5480,#5485,#5486)); +#5470 = ORIENTED_EDGE('',*,*,#5471,.T.); +#5471 = EDGE_CURVE('',#5472,#5474,#5476,.T.); +#5472 = VERTEX_POINT('',#5473); +#5473 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5474 = VERTEX_POINT('',#5475); +#5475 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5476 = LINE('',#5477,#5478); +#5477 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5478 = VECTOR('',#5479,1.); +#5479 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5480 = ORIENTED_EDGE('',*,*,#5481,.T.); +#5481 = EDGE_CURVE('',#5474,#5339,#5482,.T.); +#5482 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5483,#5484),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5483 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5484 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5485 = ORIENTED_EDGE('',*,*,#5338,.F.); +#5486 = ORIENTED_EDGE('',*,*,#5487,.F.); +#5487 = EDGE_CURVE('',#5472,#5331,#5488,.T.); +#5488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5489,#5490),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5489 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5490 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5491 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5492,#5493) + ,(#5494,#5495 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5492 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5493 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5494 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5495 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5496 = ADVANCED_FACE('',(#5497),#5545,.T.); +#5497 = FACE_BOUND('',#5498,.T.); +#5498 = EDGE_LOOP('',(#5499,#5500,#5506,#5507,#5515,#5523,#5531,#5539)); +#5499 = ORIENTED_EDGE('',*,*,#5441,.F.); +#5500 = ORIENTED_EDGE('',*,*,#5501,.T.); +#5501 = EDGE_CURVE('',#5434,#5367,#5502,.T.); +#5502 = LINE('',#5503,#5504); +#5503 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5504 = VECTOR('',#5505,1.); +#5505 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5506 = ORIENTED_EDGE('',*,*,#5364,.F.); +#5507 = ORIENTED_EDGE('',*,*,#5508,.F.); +#5508 = EDGE_CURVE('',#5509,#5365,#5511,.T.); +#5509 = VERTEX_POINT('',#5510); +#5510 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#5511 = LINE('',#5512,#5513); +#5512 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5513 = VECTOR('',#5514,1.); +#5514 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5515 = ORIENTED_EDGE('',*,*,#5516,.T.); +#5516 = EDGE_CURVE('',#5509,#5517,#5519,.T.); +#5517 = VERTEX_POINT('',#5518); +#5518 = CARTESIAN_POINT('',(-1.14,-0.75,0.22)); +#5519 = LINE('',#5520,#5521); +#5520 = CARTESIAN_POINT('',(0.117096097639,-0.75,0.22)); +#5521 = VECTOR('',#5522,1.); +#5522 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5523 = ORIENTED_EDGE('',*,*,#5524,.T.); +#5524 = EDGE_CURVE('',#5517,#5525,#5527,.T.); +#5525 = VERTEX_POINT('',#5526); +#5526 = CARTESIAN_POINT('',(-1.14,0.75,0.22)); +#5527 = LINE('',#5528,#5529); +#5528 = CARTESIAN_POINT('',(-1.14,-0.272629672442,0.22)); +#5529 = VECTOR('',#5530,1.); +#5530 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5531 = ORIENTED_EDGE('',*,*,#5532,.T.); +#5532 = EDGE_CURVE('',#5525,#5533,#5535,.T.); +#5533 = VERTEX_POINT('',#5534); +#5534 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#5535 = LINE('',#5536,#5537); +#5536 = CARTESIAN_POINT('',(0.117096097639,0.75,0.22)); +#5537 = VECTOR('',#5538,1.); +#5538 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5539 = ORIENTED_EDGE('',*,*,#5540,.F.); +#5540 = EDGE_CURVE('',#5442,#5533,#5541,.T.); +#5541 = LINE('',#5542,#5543); +#5542 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5543 = VECTOR('',#5544,1.); +#5544 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5545 = PLANE('',#5546); +#5546 = AXIS2_PLACEMENT_3D('',#5547,#5548,#5549); +#5547 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5548 = DIRECTION('',(0.,0.,-1.)); +#5549 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#5550 = ADVANCED_FACE('',(#5551),#5588,.T.); +#5551 = FACE_BOUND('',#5552,.T.); +#5552 = EDGE_LOOP('',(#5553,#5554,#5555,#5565,#5572,#5580,#5581,#5582)); +#5553 = ORIENTED_EDGE('',*,*,#5449,.F.); +#5554 = ORIENTED_EDGE('',*,*,#5540,.T.); +#5555 = ORIENTED_EDGE('',*,*,#5556,.T.); +#5556 = EDGE_CURVE('',#5533,#5557,#5559,.T.); +#5557 = VERTEX_POINT('',#5558); +#5558 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#5559 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5560,#5561,#5562,#5563,#5564), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5560 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#5561 = CARTESIAN_POINT('',(-2.238768685756,0.75,0.412247910026)); +#5562 = CARTESIAN_POINT('',(-2.25227825666,0.75,0.604499093572)); +#5563 = CARTESIAN_POINT('',(-2.265788033788,0.75,0.796753211837)); +#5564 = CARTESIAN_POINT('',(-2.279297998531,0.75,0.98901)); +#5565 = ORIENTED_EDGE('',*,*,#5566,.F.); +#5566 = EDGE_CURVE('',#5567,#5557,#5569,.T.); +#5567 = VERTEX_POINT('',#5568); +#5568 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#5569 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5570,#5571),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5570 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#5571 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#5572 = ORIENTED_EDGE('',*,*,#5573,.F.); +#5573 = EDGE_CURVE('',#5509,#5567,#5574,.T.); +#5574 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5575,#5576,#5577,#5578,#5579), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5575 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#5576 = CARTESIAN_POINT('',(-2.238768685756,-0.75,0.412247910026)); +#5577 = CARTESIAN_POINT('',(-2.25227825666,-0.75,0.604499093572)); +#5578 = CARTESIAN_POINT('',(-2.265788033788,-0.75,0.796753211837)); +#5579 = CARTESIAN_POINT('',(-2.279297998531,-0.75,0.98901)); +#5580 = ORIENTED_EDGE('',*,*,#5508,.T.); +#5581 = ORIENTED_EDGE('',*,*,#5390,.T.); +#5582 = ORIENTED_EDGE('',*,*,#5583,.F.); +#5583 = EDGE_CURVE('',#5450,#5383,#5584,.T.); +#5584 = LINE('',#5585,#5586); +#5585 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5586 = VECTOR('',#5587,1.); +#5587 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5588 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5589,#5590) + ,(#5591,#5592 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5589 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5590 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5591 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5592 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5593 = ADVANCED_FACE('',(#5594),#5611,.T.); +#5594 = FACE_BOUND('',#5595,.T.); +#5595 = EDGE_LOOP('',(#5596,#5604,#5605,#5606)); +#5596 = ORIENTED_EDGE('',*,*,#5597,.T.); +#5597 = EDGE_CURVE('',#5598,#5472,#5600,.T.); +#5598 = VERTEX_POINT('',#5599); +#5599 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5600 = LINE('',#5601,#5602); +#5601 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5602 = VECTOR('',#5603,1.); +#5603 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5604 = ORIENTED_EDGE('',*,*,#5487,.T.); +#5605 = ORIENTED_EDGE('',*,*,#5374,.F.); +#5606 = ORIENTED_EDGE('',*,*,#5607,.F.); +#5607 = EDGE_CURVE('',#5598,#5367,#5608,.T.); +#5608 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5609,#5610),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5609 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5610 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5611 = PLANE('',#5612); +#5612 = AXIS2_PLACEMENT_3D('',#5613,#5614,#5615); +#5613 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5614 = DIRECTION('',(-2.214984063823E-16,-0.997540140447, + -7.009756199374E-02)); +#5615 = DIRECTION('',(1.,-2.22044604925E-16,-1.181399173945E-30)); +#5616 = ADVANCED_FACE('',(#5617),#5634,.T.); +#5617 = FACE_BOUND('',#5618,.T.); +#5618 = EDGE_LOOP('',(#5619,#5620,#5621,#5629)); +#5619 = ORIENTED_EDGE('',*,*,#5382,.T.); +#5620 = ORIENTED_EDGE('',*,*,#5419,.T.); +#5621 = ORIENTED_EDGE('',*,*,#5622,.F.); +#5622 = EDGE_CURVE('',#5623,#5412,#5625,.T.); +#5623 = VERTEX_POINT('',#5624); +#5624 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5625 = LINE('',#5626,#5627); +#5626 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5627 = VECTOR('',#5628,1.); +#5628 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5629 = ORIENTED_EDGE('',*,*,#5630,.F.); +#5630 = EDGE_CURVE('',#5383,#5623,#5631,.T.); +#5631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5632,#5633),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5632 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5633 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5634 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5635,#5636) + ,(#5637,#5638 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5635 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5636 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5637 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5638 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5639 = ADVANCED_FACE('',(#5640),#5657,.T.); +#5640 = FACE_BOUND('',#5641,.T.); +#5641 = EDGE_LOOP('',(#5642,#5643,#5650,#5656)); +#5642 = ORIENTED_EDGE('',*,*,#5456,.T.); +#5643 = ORIENTED_EDGE('',*,*,#5644,.T.); +#5644 = EDGE_CURVE('',#5450,#5645,#5647,.T.); +#5645 = VERTEX_POINT('',#5646); +#5646 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5647 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5648,#5649),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5648 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5649 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5650 = ORIENTED_EDGE('',*,*,#5651,.F.); +#5651 = EDGE_CURVE('',#5405,#5645,#5652,.T.); +#5652 = LINE('',#5653,#5654); +#5653 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5654 = VECTOR('',#5655,1.); +#5655 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5656 = ORIENTED_EDGE('',*,*,#5404,.F.); +#5657 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5658,#5659) + ,(#5660,#5661 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5658 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5659 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5660 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5661 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5662 = ADVANCED_FACE('',(#5663,#5674),#5708,.F.); +#5663 = FACE_BOUND('',#5664,.F.); +#5664 = EDGE_LOOP('',(#5665,#5666,#5667,#5673)); +#5665 = ORIENTED_EDGE('',*,*,#5411,.F.); +#5666 = ORIENTED_EDGE('',*,*,#5622,.F.); +#5667 = ORIENTED_EDGE('',*,*,#5668,.F.); +#5668 = EDGE_CURVE('',#5645,#5623,#5669,.T.); +#5669 = LINE('',#5670,#5671); +#5670 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5671 = VECTOR('',#5672,1.); +#5672 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5673 = ORIENTED_EDGE('',*,*,#5651,.F.); +#5674 = FACE_BOUND('',#5675,.F.); +#5675 = EDGE_LOOP('',(#5676,#5686,#5694,#5702)); +#5676 = ORIENTED_EDGE('',*,*,#5677,.T.); +#5677 = EDGE_CURVE('',#5678,#5680,#5682,.T.); +#5678 = VERTEX_POINT('',#5679); +#5679 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5680 = VERTEX_POINT('',#5681); +#5681 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5682 = LINE('',#5683,#5684); +#5683 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5684 = VECTOR('',#5685,1.); +#5685 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5686 = ORIENTED_EDGE('',*,*,#5687,.T.); +#5687 = EDGE_CURVE('',#5680,#5688,#5690,.T.); +#5688 = VERTEX_POINT('',#5689); +#5689 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5690 = LINE('',#5691,#5692); +#5691 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5692 = VECTOR('',#5693,1.); +#5693 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5694 = ORIENTED_EDGE('',*,*,#5695,.T.); +#5695 = EDGE_CURVE('',#5688,#5696,#5698,.T.); +#5696 = VERTEX_POINT('',#5697); +#5697 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5698 = LINE('',#5699,#5700); +#5699 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5700 = VECTOR('',#5701,1.); +#5701 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5702 = ORIENTED_EDGE('',*,*,#5703,.T.); +#5703 = EDGE_CURVE('',#5696,#5678,#5704,.T.); +#5704 = LINE('',#5705,#5706); +#5705 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5706 = VECTOR('',#5707,1.); +#5707 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5708 = PLANE('',#5709); +#5709 = AXIS2_PLACEMENT_3D('',#5710,#5711,#5712); +#5710 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5711 = DIRECTION('',(0.,0.,-1.)); +#5712 = DIRECTION('',(-0.866473406918,0.499223231735,0.)); +#5713 = ADVANCED_FACE('',(#5714),#5731,.T.); +#5714 = FACE_BOUND('',#5715,.T.); +#5715 = EDGE_LOOP('',(#5716,#5724,#5729,#5730)); +#5716 = ORIENTED_EDGE('',*,*,#5717,.T.); +#5717 = EDGE_CURVE('',#5474,#5718,#5720,.T.); +#5718 = VERTEX_POINT('',#5719); +#5719 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5720 = LINE('',#5721,#5722); +#5721 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5722 = VECTOR('',#5723,1.); +#5723 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5724 = ORIENTED_EDGE('',*,*,#5725,.T.); +#5725 = EDGE_CURVE('',#5718,#5434,#5726,.T.); +#5726 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5727,#5728),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5727 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5728 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5729 = ORIENTED_EDGE('',*,*,#5433,.F.); +#5730 = ORIENTED_EDGE('',*,*,#5481,.F.); +#5731 = PLANE('',#5732); +#5732 = AXIS2_PLACEMENT_3D('',#5733,#5734,#5735); +#5733 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5734 = DIRECTION('',(2.214984063823E-16,0.997540140447, + -7.009756199374E-02)); +#5735 = DIRECTION('',(-1.,2.22044604925E-16,-1.181399173945E-30)); +#5736 = ADVANCED_FACE('',(#5737),#5748,.T.); +#5737 = FACE_BOUND('',#5738,.F.); +#5738 = EDGE_LOOP('',(#5739,#5740,#5741,#5747)); +#5739 = ORIENTED_EDGE('',*,*,#5471,.T.); +#5740 = ORIENTED_EDGE('',*,*,#5717,.T.); +#5741 = ORIENTED_EDGE('',*,*,#5742,.T.); +#5742 = EDGE_CURVE('',#5718,#5598,#5743,.T.); +#5743 = LINE('',#5744,#5745); +#5744 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5745 = VECTOR('',#5746,1.); +#5746 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5747 = ORIENTED_EDGE('',*,*,#5597,.T.); +#5748 = PLANE('',#5749); +#5749 = AXIS2_PLACEMENT_3D('',#5750,#5751,#5752); +#5750 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5751 = DIRECTION('',(0.,0.,-1.)); +#5752 = DIRECTION('',(-0.651825367196,0.758369099238,0.)); +#5753 = ADVANCED_FACE('',(#5754),#5822,.T.); +#5754 = FACE_BOUND('',#5755,.T.); +#5755 = EDGE_LOOP('',(#5756,#5767,#5775,#5784,#5792,#5800,#5806,#5807, + #5808,#5816)); +#5756 = ORIENTED_EDGE('',*,*,#5757,.F.); +#5757 = EDGE_CURVE('',#5758,#5760,#5762,.T.); +#5758 = VERTEX_POINT('',#5759); +#5759 = CARTESIAN_POINT('',(-2.5,0.75,0.146666666667)); +#5760 = VERTEX_POINT('',#5761); +#5761 = CARTESIAN_POINT('',(-2.353333333333,0.75,-2.775557561563E-17)); +#5762 = CIRCLE('',#5763,0.146666666667); +#5763 = AXIS2_PLACEMENT_3D('',#5764,#5765,#5766); +#5764 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.146666666667)); +#5765 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5766 = DIRECTION('',(0.,0.,1.)); +#5767 = ORIENTED_EDGE('',*,*,#5768,.T.); +#5768 = EDGE_CURVE('',#5758,#5769,#5771,.T.); +#5769 = VERTEX_POINT('',#5770); +#5770 = CARTESIAN_POINT('',(-2.5,0.75,0.842343333333)); +#5771 = LINE('',#5772,#5773); +#5772 = CARTESIAN_POINT('',(-2.5,0.75,0.)); +#5773 = VECTOR('',#5774,1.); +#5774 = DIRECTION('',(0.,0.,1.)); +#5775 = ORIENTED_EDGE('',*,*,#5776,.T.); +#5776 = EDGE_CURVE('',#5769,#5777,#5779,.T.); +#5777 = VERTEX_POINT('',#5778); +#5778 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.98901)); +#5779 = CIRCLE('',#5780,0.146666666667); +#5780 = AXIS2_PLACEMENT_3D('',#5781,#5782,#5783); +#5781 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.842343333333)); +#5782 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5783 = DIRECTION('',(0.,0.,1.)); +#5784 = ORIENTED_EDGE('',*,*,#5785,.T.); +#5785 = EDGE_CURVE('',#5777,#5786,#5788,.T.); +#5786 = VERTEX_POINT('',#5787); +#5787 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#5788 = LINE('',#5789,#5790); +#5789 = CARTESIAN_POINT('',(-2.5,0.75,0.98901)); +#5790 = VECTOR('',#5791,1.); +#5791 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5792 = ORIENTED_EDGE('',*,*,#5793,.F.); +#5793 = EDGE_CURVE('',#5794,#5786,#5796,.T.); +#5794 = VERTEX_POINT('',#5795); +#5795 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5796 = LINE('',#5797,#5798); +#5797 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5798 = VECTOR('',#5799,1.); +#5799 = DIRECTION('',(0.,0.,1.)); +#5800 = ORIENTED_EDGE('',*,*,#5801,.T.); +#5801 = EDGE_CURVE('',#5794,#5557,#5802,.T.); +#5802 = LINE('',#5803,#5804); +#5803 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5804 = VECTOR('',#5805,1.); +#5805 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5806 = ORIENTED_EDGE('',*,*,#5556,.F.); +#5807 = ORIENTED_EDGE('',*,*,#5532,.F.); +#5808 = ORIENTED_EDGE('',*,*,#5809,.F.); +#5809 = EDGE_CURVE('',#5810,#5525,#5812,.T.); +#5810 = VERTEX_POINT('',#5811); +#5811 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5812 = LINE('',#5813,#5814); +#5813 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5814 = VECTOR('',#5815,1.); +#5815 = DIRECTION('',(0.,0.,1.)); +#5816 = ORIENTED_EDGE('',*,*,#5817,.F.); +#5817 = EDGE_CURVE('',#5760,#5810,#5818,.T.); +#5818 = LINE('',#5819,#5820); +#5819 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5820 = VECTOR('',#5821,1.); +#5821 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5822 = PLANE('',#5823); +#5823 = AXIS2_PLACEMENT_3D('',#5824,#5825,#5826); +#5824 = CARTESIAN_POINT('',(-1.991067149606,0.75,0.303091083877)); +#5825 = DIRECTION('',(2.22044604925E-16,1.,-7.960022943413E-32)); +#5826 = DIRECTION('',(-1.,2.22044604925E-16,4.804138236971E-64)); +#5827 = ADVANCED_FACE('',(#5828),#5846,.T.); +#5828 = FACE_BOUND('',#5829,.T.); +#5829 = EDGE_LOOP('',(#5830,#5838,#5839,#5840)); +#5830 = ORIENTED_EDGE('',*,*,#5831,.F.); +#5831 = EDGE_CURVE('',#5810,#5832,#5834,.T.); +#5832 = VERTEX_POINT('',#5833); +#5833 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5834 = LINE('',#5835,#5836); +#5835 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5836 = VECTOR('',#5837,1.); +#5837 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5838 = ORIENTED_EDGE('',*,*,#5809,.T.); +#5839 = ORIENTED_EDGE('',*,*,#5524,.F.); +#5840 = ORIENTED_EDGE('',*,*,#5841,.F.); +#5841 = EDGE_CURVE('',#5832,#5517,#5842,.T.); +#5842 = LINE('',#5843,#5844); +#5843 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5844 = VECTOR('',#5845,1.); +#5845 = DIRECTION('',(0.,0.,1.)); +#5846 = PLANE('',#5847); +#5847 = AXIS2_PLACEMENT_3D('',#5848,#5849,#5850); +#5848 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5849 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5850 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5851 = ADVANCED_FACE('',(#5852),#5913,.T.); +#5852 = FACE_BOUND('',#5853,.T.); +#5853 = EDGE_LOOP('',(#5854,#5864,#5873,#5879,#5880,#5881,#5882,#5890, + #5898,#5906)); +#5854 = ORIENTED_EDGE('',*,*,#5855,.F.); +#5855 = EDGE_CURVE('',#5856,#5858,#5860,.T.); +#5856 = VERTEX_POINT('',#5857); +#5857 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#5858 = VERTEX_POINT('',#5859); +#5859 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#5860 = LINE('',#5861,#5862); +#5861 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#5862 = VECTOR('',#5863,1.); +#5863 = DIRECTION('',(0.,0.,1.)); +#5864 = ORIENTED_EDGE('',*,*,#5865,.T.); +#5865 = EDGE_CURVE('',#5856,#5866,#5868,.T.); +#5866 = VERTEX_POINT('',#5867); +#5867 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#5868 = CIRCLE('',#5869,0.146666666667); +#5869 = AXIS2_PLACEMENT_3D('',#5870,#5871,#5872); +#5870 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#5871 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5872 = DIRECTION('',(0.,0.,1.)); +#5873 = ORIENTED_EDGE('',*,*,#5874,.F.); +#5874 = EDGE_CURVE('',#5832,#5866,#5875,.T.); +#5875 = LINE('',#5876,#5877); +#5876 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5877 = VECTOR('',#5878,1.); +#5878 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5879 = ORIENTED_EDGE('',*,*,#5841,.T.); +#5880 = ORIENTED_EDGE('',*,*,#5516,.F.); +#5881 = ORIENTED_EDGE('',*,*,#5573,.T.); +#5882 = ORIENTED_EDGE('',*,*,#5883,.T.); +#5883 = EDGE_CURVE('',#5567,#5884,#5886,.T.); +#5884 = VERTEX_POINT('',#5885); +#5885 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5886 = LINE('',#5887,#5888); +#5887 = CARTESIAN_POINT('',(-1.14,-0.75,0.2222)); +#5888 = VECTOR('',#5889,1.); +#5889 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5890 = ORIENTED_EDGE('',*,*,#5891,.T.); +#5891 = EDGE_CURVE('',#5884,#5892,#5894,.T.); +#5892 = VERTEX_POINT('',#5893); +#5893 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5894 = LINE('',#5895,#5896); +#5895 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5896 = VECTOR('',#5897,1.); +#5897 = DIRECTION('',(0.,0.,1.)); +#5898 = ORIENTED_EDGE('',*,*,#5899,.T.); +#5899 = EDGE_CURVE('',#5892,#5900,#5902,.T.); +#5900 = VERTEX_POINT('',#5901); +#5901 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#5902 = LINE('',#5903,#5904); +#5903 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5904 = VECTOR('',#5905,1.); +#5905 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5906 = ORIENTED_EDGE('',*,*,#5907,.F.); +#5907 = EDGE_CURVE('',#5858,#5900,#5908,.T.); +#5908 = CIRCLE('',#5909,0.146666666667); +#5909 = AXIS2_PLACEMENT_3D('',#5910,#5911,#5912); +#5910 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#5911 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5912 = DIRECTION('',(0.,0.,1.)); +#5913 = PLANE('',#5914); +#5914 = AXIS2_PLACEMENT_3D('',#5915,#5916,#5917); +#5915 = CARTESIAN_POINT('',(-1.991067149606,-0.75,0.303091083877)); +#5916 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#5917 = DIRECTION('',(0.,0.,-1.)); +#5918 = ADVANCED_FACE('',(#5919),#5925,.T.); +#5919 = FACE_BOUND('',#5920,.T.); +#5920 = EDGE_LOOP('',(#5921,#5922,#5923,#5924)); +#5921 = ORIENTED_EDGE('',*,*,#5742,.T.); +#5922 = ORIENTED_EDGE('',*,*,#5607,.T.); +#5923 = ORIENTED_EDGE('',*,*,#5501,.F.); +#5924 = ORIENTED_EDGE('',*,*,#5725,.F.); +#5925 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5926,#5927) + ,(#5928,#5929 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5926 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5927 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5928 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5929 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5930 = ADVANCED_FACE('',(#5931),#5937,.T.); +#5931 = FACE_BOUND('',#5932,.T.); +#5932 = EDGE_LOOP('',(#5933,#5934,#5935,#5936)); +#5933 = ORIENTED_EDGE('',*,*,#5583,.T.); +#5934 = ORIENTED_EDGE('',*,*,#5630,.T.); +#5935 = ORIENTED_EDGE('',*,*,#5668,.F.); +#5936 = ORIENTED_EDGE('',*,*,#5644,.F.); +#5937 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5938,#5939) + ,(#5940,#5941 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5938 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5939 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5940 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5941 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5942 = ADVANCED_FACE('',(#5943),#5954,.F.); +#5943 = FACE_BOUND('',#5944,.F.); +#5944 = EDGE_LOOP('',(#5945,#5946,#5947,#5953)); +#5945 = ORIENTED_EDGE('',*,*,#5566,.F.); +#5946 = ORIENTED_EDGE('',*,*,#5883,.T.); +#5947 = ORIENTED_EDGE('',*,*,#5948,.T.); +#5948 = EDGE_CURVE('',#5884,#5794,#5949,.T.); +#5949 = LINE('',#5950,#5951); +#5950 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5951 = VECTOR('',#5952,1.); +#5952 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5953 = ORIENTED_EDGE('',*,*,#5801,.T.); +#5954 = PLANE('',#5955); +#5955 = AXIS2_PLACEMENT_3D('',#5956,#5957,#5958); +#5956 = CARTESIAN_POINT('',(-1.71,4.440892098501E-16,0.2222)); +#5957 = DIRECTION('',(0.,-0.,-1.)); +#5958 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5959 = ADVANCED_FACE('',(#5960),#5983,.F.); +#5960 = FACE_BOUND('',#5961,.F.); +#5961 = EDGE_LOOP('',(#5962,#5972,#5977,#5978)); +#5962 = ORIENTED_EDGE('',*,*,#5963,.T.); +#5963 = EDGE_CURVE('',#5964,#5966,#5968,.T.); +#5964 = VERTEX_POINT('',#5965); +#5965 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5966 = VERTEX_POINT('',#5967); +#5967 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5968 = LINE('',#5969,#5970); +#5969 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5970 = VECTOR('',#5971,1.); +#5971 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5972 = ORIENTED_EDGE('',*,*,#5973,.T.); +#5973 = EDGE_CURVE('',#5966,#5680,#5974,.T.); +#5974 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5975,#5976),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5975 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5976 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5977 = ORIENTED_EDGE('',*,*,#5677,.F.); +#5978 = ORIENTED_EDGE('',*,*,#5979,.F.); +#5979 = EDGE_CURVE('',#5964,#5678,#5980,.T.); +#5980 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5981,#5982),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5981 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5982 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5983 = PLANE('',#5984); +#5984 = AXIS2_PLACEMENT_3D('',#5985,#5986,#5987); +#5985 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5986 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5987 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5988 = ADVANCED_FACE('',(#5989),#6006,.F.); +#5989 = FACE_BOUND('',#5990,.F.); +#5990 = EDGE_LOOP('',(#5991,#5999,#6000,#6001)); +#5991 = ORIENTED_EDGE('',*,*,#5992,.T.); +#5992 = EDGE_CURVE('',#5993,#5964,#5995,.T.); +#5993 = VERTEX_POINT('',#5994); +#5994 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5995 = LINE('',#5996,#5997); +#5996 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5997 = VECTOR('',#5998,1.); +#5998 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5999 = ORIENTED_EDGE('',*,*,#5979,.T.); +#6000 = ORIENTED_EDGE('',*,*,#5703,.F.); +#6001 = ORIENTED_EDGE('',*,*,#6002,.F.); +#6002 = EDGE_CURVE('',#5993,#5696,#6003,.T.); +#6003 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6004,#6005),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6004 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#6005 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#6006 = PLANE('',#6007); +#6007 = AXIS2_PLACEMENT_3D('',#6008,#6009,#6010); +#6008 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#6009 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6010 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6011 = ADVANCED_FACE('',(#6012),#6029,.F.); +#6012 = FACE_BOUND('',#6013,.F.); +#6013 = EDGE_LOOP('',(#6014,#6022,#6023,#6024)); +#6014 = ORIENTED_EDGE('',*,*,#6015,.T.); +#6015 = EDGE_CURVE('',#6016,#5993,#6018,.T.); +#6016 = VERTEX_POINT('',#6017); +#6017 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#6018 = LINE('',#6019,#6020); +#6019 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#6020 = VECTOR('',#6021,1.); +#6021 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6022 = ORIENTED_EDGE('',*,*,#6002,.T.); +#6023 = ORIENTED_EDGE('',*,*,#5695,.F.); +#6024 = ORIENTED_EDGE('',*,*,#6025,.F.); +#6025 = EDGE_CURVE('',#6016,#5688,#6026,.T.); +#6026 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6027,#6028),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6027 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#6028 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#6029 = PLANE('',#6030); +#6030 = AXIS2_PLACEMENT_3D('',#6031,#6032,#6033); +#6031 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#6032 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6033 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6034 = ADVANCED_FACE('',(#6035),#6046,.F.); +#6035 = FACE_BOUND('',#6036,.F.); +#6036 = EDGE_LOOP('',(#6037,#6043,#6044,#6045)); +#6037 = ORIENTED_EDGE('',*,*,#6038,.T.); +#6038 = EDGE_CURVE('',#5966,#6016,#6039,.T.); +#6039 = LINE('',#6040,#6041); +#6040 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#6041 = VECTOR('',#6042,1.); +#6042 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6043 = ORIENTED_EDGE('',*,*,#6025,.T.); +#6044 = ORIENTED_EDGE('',*,*,#5687,.F.); +#6045 = ORIENTED_EDGE('',*,*,#5973,.F.); +#6046 = PLANE('',#6047); +#6047 = AXIS2_PLACEMENT_3D('',#6048,#6049,#6050); +#6048 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#6049 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6050 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6051 = ADVANCED_FACE('',(#6052),#6068,.T.); +#6052 = FACE_BOUND('',#6053,.T.); +#6053 = EDGE_LOOP('',(#6054,#6060,#6061,#6067)); +#6054 = ORIENTED_EDGE('',*,*,#6055,.T.); +#6055 = EDGE_CURVE('',#5856,#5758,#6056,.T.); +#6056 = LINE('',#6057,#6058); +#6057 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#6058 = VECTOR('',#6059,1.); +#6059 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6060 = ORIENTED_EDGE('',*,*,#5757,.T.); +#6061 = ORIENTED_EDGE('',*,*,#6062,.F.); +#6062 = EDGE_CURVE('',#5866,#5760,#6063,.T.); +#6063 = LINE('',#6064,#6065); +#6064 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#6065 = VECTOR('',#6066,1.); +#6066 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6067 = ORIENTED_EDGE('',*,*,#5865,.F.); +#6068 = CYLINDRICAL_SURFACE('',#6069,0.146666666667); +#6069 = AXIS2_PLACEMENT_3D('',#6070,#6071,#6072); +#6070 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#6071 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6072 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6073 = ADVANCED_FACE('',(#6074),#6080,.T.); +#6074 = FACE_BOUND('',#6075,.T.); +#6075 = EDGE_LOOP('',(#6076,#6077,#6078,#6079)); +#6076 = ORIENTED_EDGE('',*,*,#5874,.T.); +#6077 = ORIENTED_EDGE('',*,*,#6062,.T.); +#6078 = ORIENTED_EDGE('',*,*,#5817,.T.); +#6079 = ORIENTED_EDGE('',*,*,#5831,.T.); +#6080 = PLANE('',#6081); +#6081 = AXIS2_PLACEMENT_3D('',#6082,#6083,#6084); +#6082 = CARTESIAN_POINT('',(-1.746666666667,3.878379099357E-16, + -7.671995716851E-18)); +#6083 = DIRECTION('',(1.332277103521E-17,-2.579688262589E-33,-1.)); +#6084 = DIRECTION('',(1.,-2.22044604925E-16,1.332277103521E-17)); +#6085 = ADVANCED_FACE('',(#6086),#6097,.T.); +#6086 = FACE_BOUND('',#6087,.T.); +#6087 = EDGE_LOOP('',(#6088,#6089,#6090,#6096)); +#6088 = ORIENTED_EDGE('',*,*,#5948,.T.); +#6089 = ORIENTED_EDGE('',*,*,#5793,.T.); +#6090 = ORIENTED_EDGE('',*,*,#6091,.T.); +#6091 = EDGE_CURVE('',#5786,#5892,#6092,.T.); +#6092 = LINE('',#6093,#6094); +#6093 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#6094 = VECTOR('',#6095,1.); +#6095 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6096 = ORIENTED_EDGE('',*,*,#5891,.F.); +#6097 = PLANE('',#6098); +#6098 = AXIS2_PLACEMENT_3D('',#6099,#6100,#6101); +#6099 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#6100 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6101 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6102 = ADVANCED_FACE('',(#6103),#6114,.F.); +#6103 = FACE_BOUND('',#6104,.F.); +#6104 = EDGE_LOOP('',(#6105,#6106,#6112,#6113)); +#6105 = ORIENTED_EDGE('',*,*,#5899,.T.); +#6106 = ORIENTED_EDGE('',*,*,#6107,.T.); +#6107 = EDGE_CURVE('',#5900,#5777,#6108,.T.); +#6108 = LINE('',#6109,#6110); +#6109 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#6110 = VECTOR('',#6111,1.); +#6111 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6112 = ORIENTED_EDGE('',*,*,#5785,.T.); +#6113 = ORIENTED_EDGE('',*,*,#6091,.T.); +#6114 = PLANE('',#6115); +#6115 = AXIS2_PLACEMENT_3D('',#6116,#6117,#6118); +#6116 = CARTESIAN_POINT('',(-2.39,4.440892098501E-16,0.98901)); +#6117 = DIRECTION('',(0.,-0.,-1.)); +#6118 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6119 = ADVANCED_FACE('',(#6120),#6131,.T.); +#6120 = FACE_BOUND('',#6121,.T.); +#6121 = EDGE_LOOP('',(#6122,#6123,#6124,#6125)); +#6122 = ORIENTED_EDGE('',*,*,#5907,.T.); +#6123 = ORIENTED_EDGE('',*,*,#6107,.T.); +#6124 = ORIENTED_EDGE('',*,*,#5776,.F.); +#6125 = ORIENTED_EDGE('',*,*,#6126,.F.); +#6126 = EDGE_CURVE('',#5858,#5769,#6127,.T.); +#6127 = LINE('',#6128,#6129); +#6128 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#6129 = VECTOR('',#6130,1.); +#6130 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6131 = CYLINDRICAL_SURFACE('',#6132,0.146666666667); +#6132 = AXIS2_PLACEMENT_3D('',#6133,#6134,#6135); +#6133 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#6134 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6135 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6136 = ADVANCED_FACE('',(#6137),#6143,.T.); +#6137 = FACE_BOUND('',#6138,.T.); +#6138 = EDGE_LOOP('',(#6139,#6140,#6141,#6142)); +#6139 = ORIENTED_EDGE('',*,*,#5855,.T.); +#6140 = ORIENTED_EDGE('',*,*,#6126,.T.); +#6141 = ORIENTED_EDGE('',*,*,#5768,.F.); +#6142 = ORIENTED_EDGE('',*,*,#6055,.F.); +#6143 = PLANE('',#6144); +#6144 = AXIS2_PLACEMENT_3D('',#6145,#6146,#6147); +#6145 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#6146 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6147 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6148 = ADVANCED_FACE('',(#6149),#6155,.F.); +#6149 = FACE_BOUND('',#6150,.T.); +#6150 = EDGE_LOOP('',(#6151,#6152,#6153,#6154)); +#6151 = ORIENTED_EDGE('',*,*,#5992,.T.); +#6152 = ORIENTED_EDGE('',*,*,#5963,.T.); +#6153 = ORIENTED_EDGE('',*,*,#6038,.T.); +#6154 = ORIENTED_EDGE('',*,*,#6015,.T.); +#6155 = PLANE('',#6156); +#6156 = AXIS2_PLACEMENT_3D('',#6157,#6158,#6159); +#6157 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#6158 = DIRECTION('',(0.,0.,-1.)); +#6159 = DIRECTION('',(-0.246713052972,0.969088576701,0.)); +#6160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6164)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#6161,#6162,#6163)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#6161 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#6162 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#6163 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#6164 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6161, + 'distance_accuracy_value','confusion accuracy'); +#6165 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#6166,#6168); +#6166 = ( REPRESENTATION_RELATIONSHIP('','',#4951,#4928) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#6167) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#6167 = ITEM_DEFINED_TRANSFORMATION('','',#11,#4929); +#6168 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #6169); +#6169 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','=>[0:1:1:7]','',#4923,#4946, + $); +#6170 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#4948)); +#6171 = SHAPE_DEFINITION_REPRESENTATION(#6172,#6178); +#6172 = PRODUCT_DEFINITION_SHAPE('','',#6173); +#6173 = PRODUCT_DEFINITION('design','',#6174,#6177); +#6174 = PRODUCT_DEFINITION_FORMATION('','',#6175); +#6175 = PRODUCT('JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', + 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical','',(#6176)); +#6176 = PRODUCT_CONTEXT('',#2,'mechanical'); +#6177 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#6178 = SHAPE_REPRESENTATION('',(#11,#6179),#6183); +#6179 = AXIS2_PLACEMENT_3D('',#6180,#6181,#6182); +#6180 = CARTESIAN_POINT('',(0.,0.,0.)); +#6181 = DIRECTION('',(0.,0.,1.)); +#6182 = DIRECTION('',(1.,0.,-0.)); +#6183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6187)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#6184,#6185,#6186)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#6184 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#6185 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#6186 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#6187 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6184, + 'distance_accuracy_value','confusion accuracy'); +#6188 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#6189,#6191); +#6189 = ( REPRESENTATION_RELATIONSHIP('','',#6178,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#6190) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#6190 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31); +#6191 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #6192); +#6192 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','P6','',#5,#6173,$); +#6193 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#6175)); +#6194 = SHAPE_DEFINITION_REPRESENTATION(#6195,#6201); +#6195 = PRODUCT_DEFINITION_SHAPE('','',#6196); +#6196 = PRODUCT_DEFINITION('design','',#6197,#6200); +#6197 = PRODUCT_DEFINITION_FORMATION('','',#6198); +#6198 = PRODUCT('JST_B4B_XH_A','JST_B4B_XH_A','',(#6199)); +#6199 = PRODUCT_CONTEXT('',#2,'mechanical'); +#6200 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#6201 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#6202),#10397); +#6202 = MANIFOLD_SOLID_BREP('',#6203); +#6203 = CLOSED_SHELL('',(#6204,#6276,#6315,#6339,#6404,#6428,#6580,#6604 + ,#6669,#6694,#6743,#6760,#6784,#6801,#6971,#6995,#7261,#7285,#7318, + #7342,#7373,#7390,#7423,#7447,#7478,#7495,#7528,#7552,#7583,#7600, + #7633,#7657,#7688,#7700,#7733,#7750,#7767,#7779,#7927,#7944,#7961, + #7978,#7995,#8012,#8029,#8046,#8063,#8080,#8097,#8114,#8131,#8148, + #8165,#8177,#8194,#8211,#8228,#8245,#8291,#8337,#8383,#8429,#8460, + #8484,#8508,#8525,#8556,#8580,#8604,#8621,#8652,#8676,#8700,#8717, + #8748,#8772,#8796,#8813,#8876,#8900,#8956,#8973,#9004,#9028,#9052, + #9069,#9100,#9124,#9148,#9165,#9196,#9252,#9276,#9325,#9356,#9380, + #9404,#9421,#9452,#9476,#9500,#9517,#9548,#9572,#9596,#9613,#9644, + #9668,#9692,#9709,#9756,#9787,#9799,#9816,#9842,#9875,#9906,#9930, + #9954,#9971,#10002,#10026,#10050,#10067,#10084,#10131,#10157,#10174, + #10200,#10233,#10245,#10257,#10269,#10281,#10298,#10315,#10327, + #10339,#10351,#10368,#10385)); +#6204 = ADVANCED_FACE('',(#6205),#6271,.T.); +#6205 = FACE_BOUND('',#6206,.T.); +#6206 = EDGE_LOOP('',(#6207,#6217,#6225,#6233,#6241,#6249,#6257,#6265)); +#6207 = ORIENTED_EDGE('',*,*,#6208,.T.); +#6208 = EDGE_CURVE('',#6209,#6211,#6213,.T.); +#6209 = VERTEX_POINT('',#6210); +#6210 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#6211 = VERTEX_POINT('',#6212); +#6212 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#6213 = LINE('',#6214,#6215); +#6214 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#6215 = VECTOR('',#6216,1.); +#6216 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6217 = ORIENTED_EDGE('',*,*,#6218,.T.); +#6218 = EDGE_CURVE('',#6211,#6219,#6221,.T.); +#6219 = VERTEX_POINT('',#6220); +#6220 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#6221 = LINE('',#6222,#6223); +#6222 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#6223 = VECTOR('',#6224,1.); +#6224 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6225 = ORIENTED_EDGE('',*,*,#6226,.T.); +#6226 = EDGE_CURVE('',#6219,#6227,#6229,.T.); +#6227 = VERTEX_POINT('',#6228); +#6228 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#6229 = LINE('',#6230,#6231); +#6230 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#6231 = VECTOR('',#6232,1.); +#6232 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6233 = ORIENTED_EDGE('',*,*,#6234,.T.); +#6234 = EDGE_CURVE('',#6227,#6235,#6237,.T.); +#6235 = VERTEX_POINT('',#6236); +#6236 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#6237 = LINE('',#6238,#6239); +#6238 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#6239 = VECTOR('',#6240,1.); +#6240 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6241 = ORIENTED_EDGE('',*,*,#6242,.T.); +#6242 = EDGE_CURVE('',#6235,#6243,#6245,.T.); +#6243 = VERTEX_POINT('',#6244); +#6244 = CARTESIAN_POINT('',(9.3,0.5,7.)); +#6245 = LINE('',#6246,#6247); +#6246 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#6247 = VECTOR('',#6248,1.); +#6248 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6249 = ORIENTED_EDGE('',*,*,#6250,.F.); +#6250 = EDGE_CURVE('',#6251,#6243,#6253,.T.); +#6251 = VERTEX_POINT('',#6252); +#6252 = CARTESIAN_POINT('',(9.3,-2.85,7.)); +#6253 = LINE('',#6254,#6255); +#6254 = CARTESIAN_POINT('',(9.3,-2.65,7.)); +#6255 = VECTOR('',#6256,1.); +#6256 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6257 = ORIENTED_EDGE('',*,*,#6258,.F.); +#6258 = EDGE_CURVE('',#6259,#6251,#6261,.T.); +#6259 = VERTEX_POINT('',#6260); +#6260 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#6261 = LINE('',#6262,#6263); +#6262 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#6263 = VECTOR('',#6264,1.); +#6264 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6265 = ORIENTED_EDGE('',*,*,#6266,.F.); +#6266 = EDGE_CURVE('',#6209,#6259,#6267,.T.); +#6267 = LINE('',#6268,#6269); +#6268 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#6269 = VECTOR('',#6270,1.); +#6270 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6271 = PLANE('',#6272); +#6272 = AXIS2_PLACEMENT_3D('',#6273,#6274,#6275); +#6273 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#6274 = DIRECTION('',(0.,0.,1.)); +#6275 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6276 = ADVANCED_FACE('',(#6277),#6310,.T.); +#6277 = FACE_BOUND('',#6278,.T.); +#6278 = EDGE_LOOP('',(#6279,#6289,#6297,#6303,#6304)); +#6279 = ORIENTED_EDGE('',*,*,#6280,.T.); +#6280 = EDGE_CURVE('',#6281,#6283,#6285,.T.); +#6281 = VERTEX_POINT('',#6282); +#6282 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#6283 = VERTEX_POINT('',#6284); +#6284 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#6285 = LINE('',#6286,#6287); +#6286 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#6287 = VECTOR('',#6288,1.); +#6288 = DIRECTION('',(-0.,0.,-1.)); +#6289 = ORIENTED_EDGE('',*,*,#6290,.T.); +#6290 = EDGE_CURVE('',#6283,#6291,#6293,.T.); +#6291 = VERTEX_POINT('',#6292); +#6292 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#6293 = LINE('',#6294,#6295); +#6294 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6295 = VECTOR('',#6296,1.); +#6296 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6297 = ORIENTED_EDGE('',*,*,#6298,.T.); +#6298 = EDGE_CURVE('',#6291,#6211,#6299,.T.); +#6299 = LINE('',#6300,#6301); +#6300 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#6301 = VECTOR('',#6302,1.); +#6302 = DIRECTION('',(0.,0.,1.)); +#6303 = ORIENTED_EDGE('',*,*,#6208,.F.); +#6304 = ORIENTED_EDGE('',*,*,#6305,.T.); +#6305 = EDGE_CURVE('',#6209,#6281,#6306,.T.); +#6306 = LINE('',#6307,#6308); +#6307 = CARTESIAN_POINT('',(2.025,0.5,3.175)); +#6308 = VECTOR('',#6309,1.); +#6309 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#6310 = PLANE('',#6311); +#6311 = AXIS2_PLACEMENT_3D('',#6312,#6313,#6314); +#6312 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6313 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6314 = DIRECTION('',(0.,-0.,1.)); +#6315 = ADVANCED_FACE('',(#6316),#6334,.F.); +#6316 = FACE_BOUND('',#6317,.T.); +#6317 = EDGE_LOOP('',(#6318,#6319,#6320,#6328)); +#6318 = ORIENTED_EDGE('',*,*,#6305,.F.); +#6319 = ORIENTED_EDGE('',*,*,#6266,.T.); +#6320 = ORIENTED_EDGE('',*,*,#6321,.T.); +#6321 = EDGE_CURVE('',#6259,#6322,#6324,.T.); +#6322 = VERTEX_POINT('',#6323); +#6323 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#6324 = LINE('',#6325,#6326); +#6325 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#6326 = VECTOR('',#6327,1.); +#6327 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#6328 = ORIENTED_EDGE('',*,*,#6329,.F.); +#6329 = EDGE_CURVE('',#6281,#6322,#6330,.T.); +#6330 = LINE('',#6331,#6332); +#6331 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#6332 = VECTOR('',#6333,1.); +#6333 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6334 = PLANE('',#6335); +#6335 = AXIS2_PLACEMENT_3D('',#6336,#6337,#6338); +#6336 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#6337 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#6338 = DIRECTION('',(1.224646799147E-16,1.,-2.103984282776E-29)); +#6339 = ADVANCED_FACE('',(#6340),#6399,.F.); +#6340 = FACE_BOUND('',#6341,.F.); +#6341 = EDGE_LOOP('',(#6342,#6352,#6360,#6368,#6376,#6385,#6391,#6392, + #6393)); +#6342 = ORIENTED_EDGE('',*,*,#6343,.F.); +#6343 = EDGE_CURVE('',#6344,#6346,#6348,.T.); +#6344 = VERTEX_POINT('',#6345); +#6345 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6346 = VERTEX_POINT('',#6347); +#6347 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6348 = LINE('',#6349,#6350); +#6349 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6350 = VECTOR('',#6351,1.); +#6351 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6352 = ORIENTED_EDGE('',*,*,#6353,.T.); +#6353 = EDGE_CURVE('',#6344,#6354,#6356,.T.); +#6354 = VERTEX_POINT('',#6355); +#6355 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#6356 = LINE('',#6357,#6358); +#6357 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6358 = VECTOR('',#6359,1.); +#6359 = DIRECTION('',(0.,0.,1.)); +#6360 = ORIENTED_EDGE('',*,*,#6361,.T.); +#6361 = EDGE_CURVE('',#6354,#6362,#6364,.T.); +#6362 = VERTEX_POINT('',#6363); +#6363 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#6364 = LINE('',#6365,#6366); +#6365 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#6366 = VECTOR('',#6367,1.); +#6367 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6368 = ORIENTED_EDGE('',*,*,#6369,.T.); +#6369 = EDGE_CURVE('',#6362,#6370,#6372,.T.); +#6370 = VERTEX_POINT('',#6371); +#6371 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#6372 = LINE('',#6373,#6374); +#6373 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#6374 = VECTOR('',#6375,1.); +#6375 = DIRECTION('',(-0.,0.,-1.)); +#6376 = ORIENTED_EDGE('',*,*,#6377,.F.); +#6377 = EDGE_CURVE('',#6378,#6370,#6380,.T.); +#6378 = VERTEX_POINT('',#6379); +#6379 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#6380 = CIRCLE('',#6381,0.5); +#6381 = AXIS2_PLACEMENT_3D('',#6382,#6383,#6384); +#6382 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#6383 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6384 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6385 = ORIENTED_EDGE('',*,*,#6386,.T.); +#6386 = EDGE_CURVE('',#6378,#6291,#6387,.T.); +#6387 = LINE('',#6388,#6389); +#6388 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#6389 = VECTOR('',#6390,1.); +#6390 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6391 = ORIENTED_EDGE('',*,*,#6298,.T.); +#6392 = ORIENTED_EDGE('',*,*,#6218,.T.); +#6393 = ORIENTED_EDGE('',*,*,#6394,.F.); +#6394 = EDGE_CURVE('',#6346,#6219,#6395,.T.); +#6395 = LINE('',#6396,#6397); +#6396 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6397 = VECTOR('',#6398,1.); +#6398 = DIRECTION('',(0.,0.,1.)); +#6399 = PLANE('',#6400); +#6400 = AXIS2_PLACEMENT_3D('',#6401,#6402,#6403); +#6401 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6402 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6403 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6404 = ADVANCED_FACE('',(#6405),#6423,.F.); +#6405 = FACE_BOUND('',#6406,.T.); +#6406 = EDGE_LOOP('',(#6407,#6408,#6409,#6417)); +#6407 = ORIENTED_EDGE('',*,*,#6321,.F.); +#6408 = ORIENTED_EDGE('',*,*,#6258,.T.); +#6409 = ORIENTED_EDGE('',*,*,#6410,.T.); +#6410 = EDGE_CURVE('',#6251,#6411,#6413,.T.); +#6411 = VERTEX_POINT('',#6412); +#6412 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#6413 = LINE('',#6414,#6415); +#6414 = CARTESIAN_POINT('',(7.383333333333,-0.933333333333, + 5.083333333333)); +#6415 = VECTOR('',#6416,1.); +#6416 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#6417 = ORIENTED_EDGE('',*,*,#6418,.F.); +#6418 = EDGE_CURVE('',#6322,#6411,#6419,.T.); +#6419 = LINE('',#6420,#6421); +#6420 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#6421 = VECTOR('',#6422,1.); +#6422 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6423 = PLANE('',#6424); +#6424 = AXIS2_PLACEMENT_3D('',#6425,#6426,#6427); +#6425 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#6426 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#6427 = DIRECTION('',(-1.,1.224646799147E-16,-2.105273685727E-29)); +#6428 = ADVANCED_FACE('',(#6429),#6575,.F.); +#6429 = FACE_BOUND('',#6430,.F.); +#6430 = EDGE_LOOP('',(#6431,#6439,#6440,#6441,#6449,#6457,#6465,#6473, + #6481,#6489,#6497,#6505,#6513,#6521,#6529,#6537,#6545,#6553,#6561, + #6569)); +#6431 = ORIENTED_EDGE('',*,*,#6432,.F.); +#6432 = EDGE_CURVE('',#6346,#6433,#6435,.T.); +#6433 = VERTEX_POINT('',#6434); +#6434 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#6435 = LINE('',#6436,#6437); +#6436 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6437 = VECTOR('',#6438,1.); +#6438 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6439 = ORIENTED_EDGE('',*,*,#6394,.T.); +#6440 = ORIENTED_EDGE('',*,*,#6226,.T.); +#6441 = ORIENTED_EDGE('',*,*,#6442,.F.); +#6442 = EDGE_CURVE('',#6443,#6227,#6445,.T.); +#6443 = VERTEX_POINT('',#6444); +#6444 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6445 = LINE('',#6446,#6447); +#6446 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6447 = VECTOR('',#6448,1.); +#6448 = DIRECTION('',(0.,0.,1.)); +#6449 = ORIENTED_EDGE('',*,*,#6450,.F.); +#6450 = EDGE_CURVE('',#6451,#6443,#6453,.T.); +#6451 = VERTEX_POINT('',#6452); +#6452 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#6453 = LINE('',#6454,#6455); +#6454 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6455 = VECTOR('',#6456,1.); +#6456 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6457 = ORIENTED_EDGE('',*,*,#6458,.F.); +#6458 = EDGE_CURVE('',#6459,#6451,#6461,.T.); +#6459 = VERTEX_POINT('',#6460); +#6460 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#6461 = LINE('',#6462,#6463); +#6462 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#6463 = VECTOR('',#6464,1.); +#6464 = DIRECTION('',(-0.,0.,-1.)); +#6465 = ORIENTED_EDGE('',*,*,#6466,.T.); +#6466 = EDGE_CURVE('',#6459,#6467,#6469,.T.); +#6467 = VERTEX_POINT('',#6468); +#6468 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#6469 = LINE('',#6470,#6471); +#6470 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#6471 = VECTOR('',#6472,1.); +#6472 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6473 = ORIENTED_EDGE('',*,*,#6474,.T.); +#6474 = EDGE_CURVE('',#6467,#6475,#6477,.T.); +#6475 = VERTEX_POINT('',#6476); +#6476 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#6477 = LINE('',#6478,#6479); +#6478 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#6479 = VECTOR('',#6480,1.); +#6480 = DIRECTION('',(-0.,0.,-1.)); +#6481 = ORIENTED_EDGE('',*,*,#6482,.F.); +#6482 = EDGE_CURVE('',#6483,#6475,#6485,.T.); +#6483 = VERTEX_POINT('',#6484); +#6484 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#6485 = LINE('',#6486,#6487); +#6486 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6487 = VECTOR('',#6488,1.); +#6488 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6489 = ORIENTED_EDGE('',*,*,#6490,.F.); +#6490 = EDGE_CURVE('',#6491,#6483,#6493,.T.); +#6491 = VERTEX_POINT('',#6492); +#6492 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#6493 = LINE('',#6494,#6495); +#6494 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#6495 = VECTOR('',#6496,1.); +#6496 = DIRECTION('',(-0.,0.,-1.)); +#6497 = ORIENTED_EDGE('',*,*,#6498,.T.); +#6498 = EDGE_CURVE('',#6491,#6499,#6501,.T.); +#6499 = VERTEX_POINT('',#6500); +#6500 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#6501 = LINE('',#6502,#6503); +#6502 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#6503 = VECTOR('',#6504,1.); +#6504 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6505 = ORIENTED_EDGE('',*,*,#6506,.T.); +#6506 = EDGE_CURVE('',#6499,#6507,#6509,.T.); +#6507 = VERTEX_POINT('',#6508); +#6508 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#6509 = LINE('',#6510,#6511); +#6510 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#6511 = VECTOR('',#6512,1.); +#6512 = DIRECTION('',(-0.,0.,-1.)); +#6513 = ORIENTED_EDGE('',*,*,#6514,.F.); +#6514 = EDGE_CURVE('',#6515,#6507,#6517,.T.); +#6515 = VERTEX_POINT('',#6516); +#6516 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#6517 = LINE('',#6518,#6519); +#6518 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6519 = VECTOR('',#6520,1.); +#6520 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6521 = ORIENTED_EDGE('',*,*,#6522,.F.); +#6522 = EDGE_CURVE('',#6523,#6515,#6525,.T.); +#6523 = VERTEX_POINT('',#6524); +#6524 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#6525 = LINE('',#6526,#6527); +#6526 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#6527 = VECTOR('',#6528,1.); +#6528 = DIRECTION('',(-0.,0.,-1.)); +#6529 = ORIENTED_EDGE('',*,*,#6530,.T.); +#6530 = EDGE_CURVE('',#6523,#6531,#6533,.T.); +#6531 = VERTEX_POINT('',#6532); +#6532 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#6533 = LINE('',#6534,#6535); +#6534 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#6535 = VECTOR('',#6536,1.); +#6536 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6537 = ORIENTED_EDGE('',*,*,#6538,.T.); +#6538 = EDGE_CURVE('',#6531,#6539,#6541,.T.); +#6539 = VERTEX_POINT('',#6540); +#6540 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#6541 = LINE('',#6542,#6543); +#6542 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#6543 = VECTOR('',#6544,1.); +#6544 = DIRECTION('',(-0.,0.,-1.)); +#6545 = ORIENTED_EDGE('',*,*,#6546,.F.); +#6546 = EDGE_CURVE('',#6547,#6539,#6549,.T.); +#6547 = VERTEX_POINT('',#6548); +#6548 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#6549 = LINE('',#6550,#6551); +#6550 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6551 = VECTOR('',#6552,1.); +#6552 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6553 = ORIENTED_EDGE('',*,*,#6554,.F.); +#6554 = EDGE_CURVE('',#6555,#6547,#6557,.T.); +#6555 = VERTEX_POINT('',#6556); +#6556 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#6557 = LINE('',#6558,#6559); +#6558 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#6559 = VECTOR('',#6560,1.); +#6560 = DIRECTION('',(-0.,0.,-1.)); +#6561 = ORIENTED_EDGE('',*,*,#6562,.T.); +#6562 = EDGE_CURVE('',#6555,#6563,#6565,.T.); +#6563 = VERTEX_POINT('',#6564); +#6564 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#6565 = LINE('',#6566,#6567); +#6566 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#6567 = VECTOR('',#6568,1.); +#6568 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6569 = ORIENTED_EDGE('',*,*,#6570,.T.); +#6570 = EDGE_CURVE('',#6563,#6433,#6571,.T.); +#6571 = LINE('',#6572,#6573); +#6572 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#6573 = VECTOR('',#6574,1.); +#6574 = DIRECTION('',(-0.,0.,-1.)); +#6575 = PLANE('',#6576); +#6576 = AXIS2_PLACEMENT_3D('',#6577,#6578,#6579); +#6577 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6578 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6579 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6580 = ADVANCED_FACE('',(#6581),#6599,.F.); +#6581 = FACE_BOUND('',#6582,.T.); +#6582 = EDGE_LOOP('',(#6583,#6584,#6585,#6593)); +#6583 = ORIENTED_EDGE('',*,*,#6410,.F.); +#6584 = ORIENTED_EDGE('',*,*,#6250,.T.); +#6585 = ORIENTED_EDGE('',*,*,#6586,.T.); +#6586 = EDGE_CURVE('',#6243,#6587,#6589,.T.); +#6587 = VERTEX_POINT('',#6588); +#6588 = CARTESIAN_POINT('',(9.1,0.5,6.8)); +#6589 = LINE('',#6590,#6591); +#6590 = CARTESIAN_POINT('',(8.575,0.5,6.275)); +#6591 = VECTOR('',#6592,1.); +#6592 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#6593 = ORIENTED_EDGE('',*,*,#6594,.F.); +#6594 = EDGE_CURVE('',#6411,#6587,#6595,.T.); +#6595 = LINE('',#6596,#6597); +#6596 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#6597 = VECTOR('',#6598,1.); +#6598 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6599 = PLANE('',#6600); +#6600 = AXIS2_PLACEMENT_3D('',#6601,#6602,#6603); +#6601 = CARTESIAN_POINT('',(9.2,-2.65,6.9)); +#6602 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#6603 = DIRECTION('',(-1.224646799147E-16,-1.,-2.103984282776E-29)); +#6604 = ADVANCED_FACE('',(#6605),#6664,.F.); +#6605 = FACE_BOUND('',#6606,.F.); +#6606 = EDGE_LOOP('',(#6607,#6615,#6616,#6617,#6625,#6633,#6642,#6650, + #6658)); +#6607 = ORIENTED_EDGE('',*,*,#6608,.F.); +#6608 = EDGE_CURVE('',#6443,#6609,#6611,.T.); +#6609 = VERTEX_POINT('',#6610); +#6610 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#6611 = LINE('',#6612,#6613); +#6612 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6613 = VECTOR('',#6614,1.); +#6614 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6615 = ORIENTED_EDGE('',*,*,#6442,.T.); +#6616 = ORIENTED_EDGE('',*,*,#6234,.T.); +#6617 = ORIENTED_EDGE('',*,*,#6618,.F.); +#6618 = EDGE_CURVE('',#6619,#6235,#6621,.T.); +#6619 = VERTEX_POINT('',#6620); +#6620 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6621 = LINE('',#6622,#6623); +#6622 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6623 = VECTOR('',#6624,1.); +#6624 = DIRECTION('',(0.,0.,1.)); +#6625 = ORIENTED_EDGE('',*,*,#6626,.F.); +#6626 = EDGE_CURVE('',#6627,#6619,#6629,.T.); +#6627 = VERTEX_POINT('',#6628); +#6628 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6629 = LINE('',#6630,#6631); +#6630 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6631 = VECTOR('',#6632,1.); +#6632 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6633 = ORIENTED_EDGE('',*,*,#6634,.F.); +#6634 = EDGE_CURVE('',#6635,#6627,#6637,.T.); +#6635 = VERTEX_POINT('',#6636); +#6636 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#6637 = CIRCLE('',#6638,0.5); +#6638 = AXIS2_PLACEMENT_3D('',#6639,#6640,#6641); +#6639 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#6640 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6641 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6642 = ORIENTED_EDGE('',*,*,#6643,.F.); +#6643 = EDGE_CURVE('',#6644,#6635,#6646,.T.); +#6644 = VERTEX_POINT('',#6645); +#6645 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6646 = LINE('',#6647,#6648); +#6647 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6648 = VECTOR('',#6649,1.); +#6649 = DIRECTION('',(-0.,0.,-1.)); +#6650 = ORIENTED_EDGE('',*,*,#6651,.T.); +#6651 = EDGE_CURVE('',#6644,#6652,#6654,.T.); +#6652 = VERTEX_POINT('',#6653); +#6653 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#6654 = LINE('',#6655,#6656); +#6655 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#6656 = VECTOR('',#6657,1.); +#6657 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6658 = ORIENTED_EDGE('',*,*,#6659,.F.); +#6659 = EDGE_CURVE('',#6609,#6652,#6660,.T.); +#6660 = LINE('',#6661,#6662); +#6661 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#6662 = VECTOR('',#6663,1.); +#6663 = DIRECTION('',(0.,0.,1.)); +#6664 = PLANE('',#6665); +#6665 = AXIS2_PLACEMENT_3D('',#6666,#6667,#6668); +#6666 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6667 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6668 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6669 = ADVANCED_FACE('',(#6670),#6689,.T.); +#6670 = FACE_BOUND('',#6671,.T.); +#6671 = EDGE_LOOP('',(#6672,#6673,#6674,#6682,#6688)); +#6672 = ORIENTED_EDGE('',*,*,#6242,.F.); +#6673 = ORIENTED_EDGE('',*,*,#6618,.F.); +#6674 = ORIENTED_EDGE('',*,*,#6675,.T.); +#6675 = EDGE_CURVE('',#6619,#6676,#6678,.T.); +#6676 = VERTEX_POINT('',#6677); +#6677 = CARTESIAN_POINT('',(9.1,0.5,3.65)); +#6678 = LINE('',#6679,#6680); +#6679 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6680 = VECTOR('',#6681,1.); +#6681 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6682 = ORIENTED_EDGE('',*,*,#6683,.T.); +#6683 = EDGE_CURVE('',#6676,#6587,#6684,.T.); +#6684 = LINE('',#6685,#6686); +#6685 = CARTESIAN_POINT('',(9.1,0.5,5.325)); +#6686 = VECTOR('',#6687,1.); +#6687 = DIRECTION('',(0.,0.,1.)); +#6688 = ORIENTED_EDGE('',*,*,#6586,.F.); +#6689 = PLANE('',#6690); +#6690 = AXIS2_PLACEMENT_3D('',#6691,#6692,#6693); +#6691 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6692 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6693 = DIRECTION('',(0.,-0.,1.)); +#6694 = ADVANCED_FACE('',(#6695),#6738,.F.); +#6695 = FACE_BOUND('',#6696,.F.); +#6696 = EDGE_LOOP('',(#6697,#6698,#6706,#6715,#6723,#6731,#6737)); +#6697 = ORIENTED_EDGE('',*,*,#6280,.T.); +#6698 = ORIENTED_EDGE('',*,*,#6699,.T.); +#6699 = EDGE_CURVE('',#6283,#6700,#6702,.T.); +#6700 = VERTEX_POINT('',#6701); +#6701 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#6702 = LINE('',#6703,#6704); +#6703 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#6704 = VECTOR('',#6705,1.); +#6705 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6706 = ORIENTED_EDGE('',*,*,#6707,.T.); +#6707 = EDGE_CURVE('',#6700,#6708,#6710,.T.); +#6708 = VERTEX_POINT('',#6709); +#6709 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#6710 = CIRCLE('',#6711,0.5); +#6711 = AXIS2_PLACEMENT_3D('',#6712,#6713,#6714); +#6712 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#6713 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6714 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6715 = ORIENTED_EDGE('',*,*,#6716,.T.); +#6716 = EDGE_CURVE('',#6708,#6717,#6719,.T.); +#6717 = VERTEX_POINT('',#6718); +#6718 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#6719 = LINE('',#6720,#6721); +#6720 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#6721 = VECTOR('',#6722,1.); +#6722 = DIRECTION('',(0.,0.,-1.)); +#6723 = ORIENTED_EDGE('',*,*,#6724,.T.); +#6724 = EDGE_CURVE('',#6717,#6725,#6727,.T.); +#6725 = VERTEX_POINT('',#6726); +#6726 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#6727 = LINE('',#6728,#6729); +#6728 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#6729 = VECTOR('',#6730,1.); +#6730 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6731 = ORIENTED_EDGE('',*,*,#6732,.F.); +#6732 = EDGE_CURVE('',#6322,#6725,#6733,.T.); +#6733 = LINE('',#6734,#6735); +#6734 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#6735 = VECTOR('',#6736,1.); +#6736 = DIRECTION('',(0.,0.,-1.)); +#6737 = ORIENTED_EDGE('',*,*,#6329,.F.); +#6738 = PLANE('',#6739); +#6739 = AXIS2_PLACEMENT_3D('',#6740,#6741,#6742); +#6740 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#6741 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6742 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6743 = ADVANCED_FACE('',(#6744),#6755,.T.); +#6744 = FACE_BOUND('',#6745,.T.); +#6745 = EDGE_LOOP('',(#6746,#6747,#6753,#6754)); +#6746 = ORIENTED_EDGE('',*,*,#6699,.T.); +#6747 = ORIENTED_EDGE('',*,*,#6748,.T.); +#6748 = EDGE_CURVE('',#6700,#6378,#6749,.T.); +#6749 = LINE('',#6750,#6751); +#6750 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6751 = VECTOR('',#6752,1.); +#6752 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6753 = ORIENTED_EDGE('',*,*,#6386,.T.); +#6754 = ORIENTED_EDGE('',*,*,#6290,.F.); +#6755 = PLANE('',#6756); +#6756 = AXIS2_PLACEMENT_3D('',#6757,#6758,#6759); +#6757 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6758 = DIRECTION('',(0.,0.,1.)); +#6759 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6760 = ADVANCED_FACE('',(#6761),#6779,.F.); +#6761 = FACE_BOUND('',#6762,.F.); +#6762 = EDGE_LOOP('',(#6763,#6771,#6772,#6773)); +#6763 = ORIENTED_EDGE('',*,*,#6764,.T.); +#6764 = EDGE_CURVE('',#6765,#6344,#6767,.T.); +#6765 = VERTEX_POINT('',#6766); +#6766 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#6767 = LINE('',#6768,#6769); +#6768 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#6769 = VECTOR('',#6770,1.); +#6770 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6771 = ORIENTED_EDGE('',*,*,#6343,.T.); +#6772 = ORIENTED_EDGE('',*,*,#6432,.T.); +#6773 = ORIENTED_EDGE('',*,*,#6774,.T.); +#6774 = EDGE_CURVE('',#6433,#6765,#6775,.T.); +#6775 = LINE('',#6776,#6777); +#6776 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#6777 = VECTOR('',#6778,1.); +#6778 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6779 = PLANE('',#6780); +#6780 = AXIS2_PLACEMENT_3D('',#6781,#6782,#6783); +#6781 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#6782 = DIRECTION('',(0.,0.,1.)); +#6783 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6784 = ADVANCED_FACE('',(#6785),#6796,.F.); +#6785 = FACE_BOUND('',#6786,.F.); +#6786 = EDGE_LOOP('',(#6787,#6788,#6789,#6795)); +#6787 = ORIENTED_EDGE('',*,*,#6748,.T.); +#6788 = ORIENTED_EDGE('',*,*,#6377,.T.); +#6789 = ORIENTED_EDGE('',*,*,#6790,.F.); +#6790 = EDGE_CURVE('',#6708,#6370,#6791,.T.); +#6791 = LINE('',#6792,#6793); +#6792 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#6793 = VECTOR('',#6794,1.); +#6794 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6795 = ORIENTED_EDGE('',*,*,#6707,.F.); +#6796 = CYLINDRICAL_SURFACE('',#6797,0.5); +#6797 = AXIS2_PLACEMENT_3D('',#6798,#6799,#6800); +#6798 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#6799 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#6800 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6801 = ADVANCED_FACE('',(#6802),#6966,.T.); +#6802 = FACE_BOUND('',#6803,.T.); +#6803 = EDGE_LOOP('',(#6804,#6805,#6813,#6821,#6829,#6837,#6845,#6854, + #6862,#6870,#6878,#6886,#6894,#6903,#6911,#6919,#6927,#6935,#6941, + #6942,#6943,#6944,#6952,#6960)); +#6804 = ORIENTED_EDGE('',*,*,#6643,.F.); +#6805 = ORIENTED_EDGE('',*,*,#6806,.T.); +#6806 = EDGE_CURVE('',#6644,#6807,#6809,.T.); +#6807 = VERTEX_POINT('',#6808); +#6808 = CARTESIAN_POINT('',(8.,1.5,7.)); +#6809 = LINE('',#6810,#6811); +#6810 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6811 = VECTOR('',#6812,1.); +#6812 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6813 = ORIENTED_EDGE('',*,*,#6814,.T.); +#6814 = EDGE_CURVE('',#6807,#6815,#6817,.T.); +#6815 = VERTEX_POINT('',#6816); +#6816 = CARTESIAN_POINT('',(8.,1.5,6.1)); +#6817 = LINE('',#6818,#6819); +#6818 = CARTESIAN_POINT('',(8.,1.5,5.318198005698)); +#6819 = VECTOR('',#6820,1.); +#6820 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6821 = ORIENTED_EDGE('',*,*,#6822,.T.); +#6822 = EDGE_CURVE('',#6815,#6823,#6825,.T.); +#6823 = VERTEX_POINT('',#6824); +#6824 = CARTESIAN_POINT('',(7.75,1.5,5.85)); +#6825 = LINE('',#6826,#6827); +#6826 = CARTESIAN_POINT('',(6.421599002849,1.5,4.521599002849)); +#6827 = VECTOR('',#6828,1.); +#6828 = DIRECTION('',(-0.707106781187,1.466048277022E-16,-0.707106781187 + )); +#6829 = ORIENTED_EDGE('',*,*,#6830,.T.); +#6830 = EDGE_CURVE('',#6823,#6831,#6833,.T.); +#6831 = VERTEX_POINT('',#6832); +#6832 = CARTESIAN_POINT('',(8.,1.5,5.6)); +#6833 = LINE('',#6834,#6835); +#6834 = CARTESIAN_POINT('',(7.203400997151,1.5,6.396599002849)); +#6835 = VECTOR('',#6836,1.); +#6836 = DIRECTION('',(0.707106781187,-2.658638354479E-17,-0.707106781187 + )); +#6837 = ORIENTED_EDGE('',*,*,#6838,.T.); +#6838 = EDGE_CURVE('',#6831,#6839,#6841,.T.); +#6839 = VERTEX_POINT('',#6840); +#6840 = CARTESIAN_POINT('',(8.,1.5,3.85)); +#6841 = LINE('',#6842,#6843); +#6842 = CARTESIAN_POINT('',(8.,1.5,3.818198005698)); +#6843 = VECTOR('',#6844,1.); +#6844 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6845 = ORIENTED_EDGE('',*,*,#6846,.F.); +#6846 = EDGE_CURVE('',#6847,#6839,#6849,.T.); +#6847 = VERTEX_POINT('',#6848); +#6848 = CARTESIAN_POINT('',(7.25,1.5,3.1)); +#6849 = CIRCLE('',#6850,0.75); +#6850 = AXIS2_PLACEMENT_3D('',#6851,#6852,#6853); +#6851 = CARTESIAN_POINT('',(7.25,1.5,3.85)); +#6852 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6853 = DIRECTION('',(-0.,0.,-1.)); +#6854 = ORIENTED_EDGE('',*,*,#6855,.T.); +#6855 = EDGE_CURVE('',#6847,#6856,#6858,.T.); +#6856 = VERTEX_POINT('',#6857); +#6857 = CARTESIAN_POINT('',(6.5,1.5,3.1)); +#6858 = LINE('',#6859,#6860); +#6859 = CARTESIAN_POINT('',(5.125,1.5,3.1)); +#6860 = VECTOR('',#6861,1.); +#6861 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6862 = ORIENTED_EDGE('',*,*,#6863,.T.); +#6863 = EDGE_CURVE('',#6856,#6864,#6866,.T.); +#6864 = VERTEX_POINT('',#6865); +#6865 = CARTESIAN_POINT('',(6.5,1.5,7.)); +#6866 = LINE('',#6867,#6868); +#6867 = CARTESIAN_POINT('',(6.5,1.5,5.768198005698)); +#6868 = VECTOR('',#6869,1.); +#6869 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#6870 = ORIENTED_EDGE('',*,*,#6871,.T.); +#6871 = EDGE_CURVE('',#6864,#6872,#6874,.T.); +#6872 = VERTEX_POINT('',#6873); +#6873 = CARTESIAN_POINT('',(1.,1.5,7.)); +#6874 = LINE('',#6875,#6876); +#6875 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6876 = VECTOR('',#6877,1.); +#6877 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6878 = ORIENTED_EDGE('',*,*,#6879,.F.); +#6879 = EDGE_CURVE('',#6880,#6872,#6882,.T.); +#6880 = VERTEX_POINT('',#6881); +#6881 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#6882 = LINE('',#6883,#6884); +#6883 = CARTESIAN_POINT('',(1.,1.5,5.768198005698)); +#6884 = VECTOR('',#6885,1.); +#6885 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#6886 = ORIENTED_EDGE('',*,*,#6887,.F.); +#6887 = EDGE_CURVE('',#6888,#6880,#6890,.T.); +#6888 = VERTEX_POINT('',#6889); +#6889 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#6890 = LINE('',#6891,#6892); +#6891 = CARTESIAN_POINT('',(2.375,1.5,3.1)); +#6892 = VECTOR('',#6893,1.); +#6893 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6894 = ORIENTED_EDGE('',*,*,#6895,.F.); +#6895 = EDGE_CURVE('',#6896,#6888,#6898,.T.); +#6896 = VERTEX_POINT('',#6897); +#6897 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#6898 = CIRCLE('',#6899,0.75); +#6899 = AXIS2_PLACEMENT_3D('',#6900,#6901,#6902); +#6900 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#6901 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6902 = DIRECTION('',(-0.,0.,-1.)); +#6903 = ORIENTED_EDGE('',*,*,#6904,.F.); +#6904 = EDGE_CURVE('',#6905,#6896,#6907,.T.); +#6905 = VERTEX_POINT('',#6906); +#6906 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#6907 = LINE('',#6908,#6909); +#6908 = CARTESIAN_POINT('',(-0.5,1.5,3.818198005698)); +#6909 = VECTOR('',#6910,1.); +#6910 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6911 = ORIENTED_EDGE('',*,*,#6912,.F.); +#6912 = EDGE_CURVE('',#6913,#6905,#6915,.T.); +#6913 = VERTEX_POINT('',#6914); +#6914 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#6915 = LINE('',#6916,#6917); +#6916 = CARTESIAN_POINT('',(0.296599002849,1.5,6.396599002849)); +#6917 = VECTOR('',#6918,1.); +#6918 = DIRECTION('',(-0.707106781187,1.466048277022E-16,-0.707106781187 + )); +#6919 = ORIENTED_EDGE('',*,*,#6920,.F.); +#6920 = EDGE_CURVE('',#6921,#6913,#6923,.T.); +#6921 = VERTEX_POINT('',#6922); +#6922 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#6923 = LINE('',#6924,#6925); +#6924 = CARTESIAN_POINT('',(1.078400997151,1.5,4.521599002849)); +#6925 = VECTOR('',#6926,1.); +#6926 = DIRECTION('',(0.707106781187,-2.658638354479E-17,-0.707106781187 + )); +#6927 = ORIENTED_EDGE('',*,*,#6928,.F.); +#6928 = EDGE_CURVE('',#6929,#6921,#6931,.T.); +#6929 = VERTEX_POINT('',#6930); +#6930 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#6931 = LINE('',#6932,#6933); +#6932 = CARTESIAN_POINT('',(-0.5,1.5,5.318198005698)); +#6933 = VECTOR('',#6934,1.); +#6934 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6935 = ORIENTED_EDGE('',*,*,#6936,.T.); +#6936 = EDGE_CURVE('',#6929,#6362,#6937,.T.); +#6937 = LINE('',#6938,#6939); +#6938 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6939 = VECTOR('',#6940,1.); +#6940 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6941 = ORIENTED_EDGE('',*,*,#6369,.T.); +#6942 = ORIENTED_EDGE('',*,*,#6790,.F.); +#6943 = ORIENTED_EDGE('',*,*,#6716,.T.); +#6944 = ORIENTED_EDGE('',*,*,#6945,.F.); +#6945 = EDGE_CURVE('',#6946,#6717,#6948,.T.); +#6946 = VERTEX_POINT('',#6947); +#6947 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#6948 = LINE('',#6949,#6950); +#6949 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#6950 = VECTOR('',#6951,1.); +#6951 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6952 = ORIENTED_EDGE('',*,*,#6953,.F.); +#6953 = EDGE_CURVE('',#6954,#6946,#6956,.T.); +#6954 = VERTEX_POINT('',#6955); +#6955 = CARTESIAN_POINT('',(9.1,1.5,4.15)); +#6956 = LINE('',#6957,#6958); +#6957 = CARTESIAN_POINT('',(9.1,1.5,7.)); +#6958 = VECTOR('',#6959,1.); +#6959 = DIRECTION('',(0.,0.,-1.)); +#6960 = ORIENTED_EDGE('',*,*,#6961,.F.); +#6961 = EDGE_CURVE('',#6635,#6954,#6962,.T.); +#6962 = LINE('',#6963,#6964); +#6963 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#6964 = VECTOR('',#6965,1.); +#6965 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6966 = PLANE('',#6967); +#6967 = AXIS2_PLACEMENT_3D('',#6968,#6969,#6970); +#6968 = CARTESIAN_POINT('',(3.75,1.5,4.536396011396)); +#6969 = DIRECTION('',(-1.224646799147E-16,-1.,-8.486585573121E-17)); +#6970 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#6971 = ADVANCED_FACE('',(#6972),#6990,.T.); +#6972 = FACE_BOUND('',#6973,.T.); +#6973 = EDGE_LOOP('',(#6974,#6975,#6983,#6989)); +#6974 = ORIENTED_EDGE('',*,*,#6936,.F.); +#6975 = ORIENTED_EDGE('',*,*,#6976,.F.); +#6976 = EDGE_CURVE('',#6977,#6929,#6979,.T.); +#6977 = VERTEX_POINT('',#6978); +#6978 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#6979 = LINE('',#6980,#6981); +#6980 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#6981 = VECTOR('',#6982,1.); +#6982 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6983 = ORIENTED_EDGE('',*,*,#6984,.T.); +#6984 = EDGE_CURVE('',#6977,#6354,#6985,.T.); +#6985 = LINE('',#6986,#6987); +#6986 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#6987 = VECTOR('',#6988,1.); +#6988 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6989 = ORIENTED_EDGE('',*,*,#6361,.T.); +#6990 = PLANE('',#6991); +#6991 = AXIS2_PLACEMENT_3D('',#6992,#6993,#6994); +#6992 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#6993 = DIRECTION('',(0.,0.,1.)); +#6994 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6995 = ADVANCED_FACE('',(#6996),#7256,.F.); +#6996 = FACE_BOUND('',#6997,.F.); +#6997 = EDGE_LOOP('',(#6998,#7006,#7007,#7015,#7023,#7031,#7039,#7047, + #7056,#7064,#7072,#7080,#7088,#7096,#7105,#7113,#7121,#7129,#7135, + #7136,#7137,#7138,#7146,#7154,#7162,#7170,#7178,#7186,#7194,#7202, + #7210,#7218,#7226,#7234,#7242,#7250)); +#6998 = ORIENTED_EDGE('',*,*,#6999,.F.); +#6999 = EDGE_CURVE('',#6609,#7000,#7002,.T.); +#7000 = VERTEX_POINT('',#7001); +#7001 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#7002 = LINE('',#7003,#7004); +#7003 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7004 = VECTOR('',#7005,1.); +#7005 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7006 = ORIENTED_EDGE('',*,*,#6659,.T.); +#7007 = ORIENTED_EDGE('',*,*,#7008,.T.); +#7008 = EDGE_CURVE('',#6652,#7009,#7011,.T.); +#7009 = VERTEX_POINT('',#7010); +#7010 = CARTESIAN_POINT('',(8.,2.35,7.)); +#7011 = LINE('',#7012,#7013); +#7012 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#7013 = VECTOR('',#7014,1.); +#7014 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7015 = ORIENTED_EDGE('',*,*,#7016,.F.); +#7016 = EDGE_CURVE('',#7017,#7009,#7019,.T.); +#7017 = VERTEX_POINT('',#7018); +#7018 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#7019 = LINE('',#7020,#7021); +#7020 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#7021 = VECTOR('',#7022,1.); +#7022 = DIRECTION('',(0.,0.,1.)); +#7023 = ORIENTED_EDGE('',*,*,#7024,.F.); +#7024 = EDGE_CURVE('',#7025,#7017,#7027,.T.); +#7025 = VERTEX_POINT('',#7026); +#7026 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#7027 = LINE('',#7028,#7029); +#7028 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#7029 = VECTOR('',#7030,1.); +#7030 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#7031 = ORIENTED_EDGE('',*,*,#7032,.F.); +#7032 = EDGE_CURVE('',#7033,#7025,#7035,.T.); +#7033 = VERTEX_POINT('',#7034); +#7034 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#7035 = LINE('',#7036,#7037); +#7036 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#7037 = VECTOR('',#7038,1.); +#7038 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7039 = ORIENTED_EDGE('',*,*,#7040,.F.); +#7040 = EDGE_CURVE('',#7041,#7033,#7043,.T.); +#7041 = VERTEX_POINT('',#7042); +#7042 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#7043 = LINE('',#7044,#7045); +#7044 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#7045 = VECTOR('',#7046,1.); +#7046 = DIRECTION('',(0.,0.,1.)); +#7047 = ORIENTED_EDGE('',*,*,#7048,.F.); +#7048 = EDGE_CURVE('',#7049,#7041,#7051,.T.); +#7049 = VERTEX_POINT('',#7050); +#7050 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#7051 = CIRCLE('',#7052,0.75); +#7052 = AXIS2_PLACEMENT_3D('',#7053,#7054,#7055); +#7053 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#7054 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7055 = DIRECTION('',(0.,0.,1.)); +#7056 = ORIENTED_EDGE('',*,*,#7057,.F.); +#7057 = EDGE_CURVE('',#7058,#7049,#7060,.T.); +#7058 = VERTEX_POINT('',#7059); +#7059 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#7060 = LINE('',#7061,#7062); +#7061 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#7062 = VECTOR('',#7063,1.); +#7063 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7064 = ORIENTED_EDGE('',*,*,#7065,.F.); +#7065 = EDGE_CURVE('',#7066,#7058,#7068,.T.); +#7066 = VERTEX_POINT('',#7067); +#7067 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#7068 = LINE('',#7069,#7070); +#7069 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#7070 = VECTOR('',#7071,1.); +#7071 = DIRECTION('',(-0.,0.,-1.)); +#7072 = ORIENTED_EDGE('',*,*,#7073,.T.); +#7073 = EDGE_CURVE('',#7066,#7074,#7076,.T.); +#7074 = VERTEX_POINT('',#7075); +#7075 = CARTESIAN_POINT('',(1.,2.35,7.)); +#7076 = LINE('',#7077,#7078); +#7077 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#7078 = VECTOR('',#7079,1.); +#7079 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7080 = ORIENTED_EDGE('',*,*,#7081,.T.); +#7081 = EDGE_CURVE('',#7074,#7082,#7084,.T.); +#7082 = VERTEX_POINT('',#7083); +#7083 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#7084 = LINE('',#7085,#7086); +#7085 = CARTESIAN_POINT('',(1.,2.35,7.)); +#7086 = VECTOR('',#7087,1.); +#7087 = DIRECTION('',(-0.,0.,-1.)); +#7088 = ORIENTED_EDGE('',*,*,#7089,.T.); +#7089 = EDGE_CURVE('',#7082,#7090,#7092,.T.); +#7090 = VERTEX_POINT('',#7091); +#7091 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#7092 = LINE('',#7093,#7094); +#7093 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#7094 = VECTOR('',#7095,1.); +#7095 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7096 = ORIENTED_EDGE('',*,*,#7097,.T.); +#7097 = EDGE_CURVE('',#7090,#7098,#7100,.T.); +#7098 = VERTEX_POINT('',#7099); +#7099 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#7100 = CIRCLE('',#7101,0.75); +#7101 = AXIS2_PLACEMENT_3D('',#7102,#7103,#7104); +#7102 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#7103 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#7104 = DIRECTION('',(0.,0.,1.)); +#7105 = ORIENTED_EDGE('',*,*,#7106,.T.); +#7106 = EDGE_CURVE('',#7098,#7107,#7109,.T.); +#7107 = VERTEX_POINT('',#7108); +#7108 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7109 = LINE('',#7110,#7111); +#7110 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#7111 = VECTOR('',#7112,1.); +#7112 = DIRECTION('',(0.,0.,1.)); +#7113 = ORIENTED_EDGE('',*,*,#7114,.T.); +#7114 = EDGE_CURVE('',#7107,#7115,#7117,.T.); +#7115 = VERTEX_POINT('',#7116); +#7116 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7117 = LINE('',#7118,#7119); +#7118 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7119 = VECTOR('',#7120,1.); +#7120 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#7121 = ORIENTED_EDGE('',*,*,#7122,.T.); +#7122 = EDGE_CURVE('',#7115,#7123,#7125,.T.); +#7123 = VERTEX_POINT('',#7124); +#7124 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7125 = LINE('',#7126,#7127); +#7126 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7127 = VECTOR('',#7128,1.); +#7128 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7129 = ORIENTED_EDGE('',*,*,#7130,.T.); +#7130 = EDGE_CURVE('',#7123,#6977,#7131,.T.); +#7131 = LINE('',#7132,#7133); +#7132 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7133 = VECTOR('',#7134,1.); +#7134 = DIRECTION('',(0.,0.,1.)); +#7135 = ORIENTED_EDGE('',*,*,#6984,.T.); +#7136 = ORIENTED_EDGE('',*,*,#6353,.F.); +#7137 = ORIENTED_EDGE('',*,*,#6764,.F.); +#7138 = ORIENTED_EDGE('',*,*,#7139,.T.); +#7139 = EDGE_CURVE('',#6765,#7140,#7142,.T.); +#7140 = VERTEX_POINT('',#7141); +#7141 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#7142 = LINE('',#7143,#7144); +#7143 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#7144 = VECTOR('',#7145,1.); +#7145 = DIRECTION('',(0.,0.,1.)); +#7146 = ORIENTED_EDGE('',*,*,#7147,.F.); +#7147 = EDGE_CURVE('',#7148,#7140,#7150,.T.); +#7148 = VERTEX_POINT('',#7149); +#7149 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#7150 = LINE('',#7151,#7152); +#7151 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#7152 = VECTOR('',#7153,1.); +#7153 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7154 = ORIENTED_EDGE('',*,*,#7155,.F.); +#7155 = EDGE_CURVE('',#7156,#7148,#7158,.T.); +#7156 = VERTEX_POINT('',#7157); +#7157 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#7158 = LINE('',#7159,#7160); +#7159 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#7160 = VECTOR('',#7161,1.); +#7161 = DIRECTION('',(0.,0.,1.)); +#7162 = ORIENTED_EDGE('',*,*,#7163,.F.); +#7163 = EDGE_CURVE('',#7164,#7156,#7166,.T.); +#7164 = VERTEX_POINT('',#7165); +#7165 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#7166 = LINE('',#7167,#7168); +#7167 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7168 = VECTOR('',#7169,1.); +#7169 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7170 = ORIENTED_EDGE('',*,*,#7171,.T.); +#7171 = EDGE_CURVE('',#7164,#7172,#7174,.T.); +#7172 = VERTEX_POINT('',#7173); +#7173 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#7174 = LINE('',#7175,#7176); +#7175 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#7176 = VECTOR('',#7177,1.); +#7177 = DIRECTION('',(0.,0.,1.)); +#7178 = ORIENTED_EDGE('',*,*,#7179,.F.); +#7179 = EDGE_CURVE('',#7180,#7172,#7182,.T.); +#7180 = VERTEX_POINT('',#7181); +#7181 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#7182 = LINE('',#7183,#7184); +#7183 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#7184 = VECTOR('',#7185,1.); +#7185 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7186 = ORIENTED_EDGE('',*,*,#7187,.F.); +#7187 = EDGE_CURVE('',#7188,#7180,#7190,.T.); +#7188 = VERTEX_POINT('',#7189); +#7189 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#7190 = LINE('',#7191,#7192); +#7191 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#7192 = VECTOR('',#7193,1.); +#7193 = DIRECTION('',(0.,0.,1.)); +#7194 = ORIENTED_EDGE('',*,*,#7195,.F.); +#7195 = EDGE_CURVE('',#7196,#7188,#7198,.T.); +#7196 = VERTEX_POINT('',#7197); +#7197 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#7198 = LINE('',#7199,#7200); +#7199 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7200 = VECTOR('',#7201,1.); +#7201 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7202 = ORIENTED_EDGE('',*,*,#7203,.T.); +#7203 = EDGE_CURVE('',#7196,#7204,#7206,.T.); +#7204 = VERTEX_POINT('',#7205); +#7205 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#7206 = LINE('',#7207,#7208); +#7207 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#7208 = VECTOR('',#7209,1.); +#7209 = DIRECTION('',(0.,0.,1.)); +#7210 = ORIENTED_EDGE('',*,*,#7211,.F.); +#7211 = EDGE_CURVE('',#7212,#7204,#7214,.T.); +#7212 = VERTEX_POINT('',#7213); +#7213 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#7214 = LINE('',#7215,#7216); +#7215 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#7216 = VECTOR('',#7217,1.); +#7217 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7218 = ORIENTED_EDGE('',*,*,#7219,.F.); +#7219 = EDGE_CURVE('',#7220,#7212,#7222,.T.); +#7220 = VERTEX_POINT('',#7221); +#7221 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#7222 = LINE('',#7223,#7224); +#7223 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#7224 = VECTOR('',#7225,1.); +#7225 = DIRECTION('',(0.,0.,1.)); +#7226 = ORIENTED_EDGE('',*,*,#7227,.F.); +#7227 = EDGE_CURVE('',#7228,#7220,#7230,.T.); +#7228 = VERTEX_POINT('',#7229); +#7229 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#7230 = LINE('',#7231,#7232); +#7231 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7232 = VECTOR('',#7233,1.); +#7233 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7234 = ORIENTED_EDGE('',*,*,#7235,.T.); +#7235 = EDGE_CURVE('',#7228,#7236,#7238,.T.); +#7236 = VERTEX_POINT('',#7237); +#7237 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#7238 = LINE('',#7239,#7240); +#7239 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#7240 = VECTOR('',#7241,1.); +#7241 = DIRECTION('',(0.,0.,1.)); +#7242 = ORIENTED_EDGE('',*,*,#7243,.F.); +#7243 = EDGE_CURVE('',#7244,#7236,#7246,.T.); +#7244 = VERTEX_POINT('',#7245); +#7245 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#7246 = LINE('',#7247,#7248); +#7247 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#7248 = VECTOR('',#7249,1.); +#7249 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7250 = ORIENTED_EDGE('',*,*,#7251,.F.); +#7251 = EDGE_CURVE('',#7000,#7244,#7252,.T.); +#7252 = LINE('',#7253,#7254); +#7253 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#7254 = VECTOR('',#7255,1.); +#7255 = DIRECTION('',(0.,0.,1.)); +#7256 = PLANE('',#7257); +#7257 = AXIS2_PLACEMENT_3D('',#7258,#7259,#7260); +#7258 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7259 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7260 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7261 = ADVANCED_FACE('',(#7262),#7280,.F.); +#7262 = FACE_BOUND('',#7263,.F.); +#7263 = EDGE_LOOP('',(#7264,#7265,#7273,#7279)); +#7264 = ORIENTED_EDGE('',*,*,#6732,.T.); +#7265 = ORIENTED_EDGE('',*,*,#7266,.T.); +#7266 = EDGE_CURVE('',#6725,#7267,#7269,.T.); +#7267 = VERTEX_POINT('',#7268); +#7268 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#7269 = LINE('',#7270,#7271); +#7270 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#7271 = VECTOR('',#7272,1.); +#7272 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7273 = ORIENTED_EDGE('',*,*,#7274,.F.); +#7274 = EDGE_CURVE('',#6411,#7267,#7275,.T.); +#7275 = LINE('',#7276,#7277); +#7276 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#7277 = VECTOR('',#7278,1.); +#7278 = DIRECTION('',(0.,0.,-1.)); +#7279 = ORIENTED_EDGE('',*,*,#6418,.F.); +#7280 = PLANE('',#7281); +#7281 = AXIS2_PLACEMENT_3D('',#7282,#7283,#7284); +#7282 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#7283 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7284 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7285 = ADVANCED_FACE('',(#7286),#7313,.T.); +#7286 = FACE_BOUND('',#7287,.T.); +#7287 = EDGE_LOOP('',(#7288,#7289,#7297,#7305,#7311,#7312)); +#7288 = ORIENTED_EDGE('',*,*,#7139,.T.); +#7289 = ORIENTED_EDGE('',*,*,#7290,.T.); +#7290 = EDGE_CURVE('',#7140,#7291,#7293,.T.); +#7291 = VERTEX_POINT('',#7292); +#7292 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#7293 = LINE('',#7294,#7295); +#7294 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#7295 = VECTOR('',#7296,1.); +#7296 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7297 = ORIENTED_EDGE('',*,*,#7298,.T.); +#7298 = EDGE_CURVE('',#7291,#7299,#7301,.T.); +#7299 = VERTEX_POINT('',#7300); +#7300 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#7301 = LINE('',#7302,#7303); +#7302 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#7303 = VECTOR('',#7304,1.); +#7304 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7305 = ORIENTED_EDGE('',*,*,#7306,.T.); +#7306 = EDGE_CURVE('',#7299,#6563,#7307,.T.); +#7307 = LINE('',#7308,#7309); +#7308 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#7309 = VECTOR('',#7310,1.); +#7310 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7311 = ORIENTED_EDGE('',*,*,#6570,.T.); +#7312 = ORIENTED_EDGE('',*,*,#6774,.T.); +#7313 = PLANE('',#7314); +#7314 = AXIS2_PLACEMENT_3D('',#7315,#7316,#7317); +#7315 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#7316 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7317 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7318 = ADVANCED_FACE('',(#7319),#7337,.F.); +#7319 = FACE_BOUND('',#7320,.F.); +#7320 = EDGE_LOOP('',(#7321,#7329,#7330,#7331)); +#7321 = ORIENTED_EDGE('',*,*,#7322,.T.); +#7322 = EDGE_CURVE('',#7323,#7299,#7325,.T.); +#7323 = VERTEX_POINT('',#7324); +#7324 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7325 = LINE('',#7326,#7327); +#7326 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7327 = VECTOR('',#7328,1.); +#7328 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7329 = ORIENTED_EDGE('',*,*,#7306,.T.); +#7330 = ORIENTED_EDGE('',*,*,#6562,.F.); +#7331 = ORIENTED_EDGE('',*,*,#7332,.F.); +#7332 = EDGE_CURVE('',#7323,#6555,#7333,.T.); +#7333 = LINE('',#7334,#7335); +#7334 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7335 = VECTOR('',#7336,1.); +#7336 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7337 = PLANE('',#7338); +#7338 = AXIS2_PLACEMENT_3D('',#7339,#7340,#7341); +#7339 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7340 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7341 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7342 = ADVANCED_FACE('',(#7343),#7368,.F.); +#7343 = FACE_BOUND('',#7344,.F.); +#7344 = EDGE_LOOP('',(#7345,#7346,#7354,#7360,#7361,#7362)); +#7345 = ORIENTED_EDGE('',*,*,#7155,.T.); +#7346 = ORIENTED_EDGE('',*,*,#7347,.T.); +#7347 = EDGE_CURVE('',#7148,#7348,#7350,.T.); +#7348 = VERTEX_POINT('',#7349); +#7349 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#7350 = LINE('',#7351,#7352); +#7351 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#7352 = VECTOR('',#7353,1.); +#7353 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7354 = ORIENTED_EDGE('',*,*,#7355,.T.); +#7355 = EDGE_CURVE('',#7348,#7323,#7356,.T.); +#7356 = LINE('',#7357,#7358); +#7357 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#7358 = VECTOR('',#7359,1.); +#7359 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7360 = ORIENTED_EDGE('',*,*,#7332,.T.); +#7361 = ORIENTED_EDGE('',*,*,#6554,.T.); +#7362 = ORIENTED_EDGE('',*,*,#7363,.T.); +#7363 = EDGE_CURVE('',#6547,#7156,#7364,.T.); +#7364 = LINE('',#7365,#7366); +#7365 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#7366 = VECTOR('',#7367,1.); +#7367 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7368 = PLANE('',#7369); +#7369 = AXIS2_PLACEMENT_3D('',#7370,#7371,#7372); +#7370 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#7371 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7372 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7373 = ADVANCED_FACE('',(#7374),#7385,.F.); +#7374 = FACE_BOUND('',#7375,.F.); +#7375 = EDGE_LOOP('',(#7376,#7377,#7378,#7379)); +#7376 = ORIENTED_EDGE('',*,*,#7163,.T.); +#7377 = ORIENTED_EDGE('',*,*,#7363,.F.); +#7378 = ORIENTED_EDGE('',*,*,#6546,.T.); +#7379 = ORIENTED_EDGE('',*,*,#7380,.T.); +#7380 = EDGE_CURVE('',#6539,#7164,#7381,.T.); +#7381 = LINE('',#7382,#7383); +#7382 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#7383 = VECTOR('',#7384,1.); +#7384 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7385 = PLANE('',#7386); +#7386 = AXIS2_PLACEMENT_3D('',#7387,#7388,#7389); +#7387 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7388 = DIRECTION('',(0.,0.,1.)); +#7389 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7390 = ADVANCED_FACE('',(#7391),#7418,.T.); +#7391 = FACE_BOUND('',#7392,.T.); +#7392 = EDGE_LOOP('',(#7393,#7394,#7402,#7410,#7416,#7417)); +#7393 = ORIENTED_EDGE('',*,*,#7171,.T.); +#7394 = ORIENTED_EDGE('',*,*,#7395,.T.); +#7395 = EDGE_CURVE('',#7172,#7396,#7398,.T.); +#7396 = VERTEX_POINT('',#7397); +#7397 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#7398 = LINE('',#7399,#7400); +#7399 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#7400 = VECTOR('',#7401,1.); +#7401 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7402 = ORIENTED_EDGE('',*,*,#7403,.T.); +#7403 = EDGE_CURVE('',#7396,#7404,#7406,.T.); +#7404 = VERTEX_POINT('',#7405); +#7405 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#7406 = LINE('',#7407,#7408); +#7407 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#7408 = VECTOR('',#7409,1.); +#7409 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7410 = ORIENTED_EDGE('',*,*,#7411,.T.); +#7411 = EDGE_CURVE('',#7404,#6531,#7412,.T.); +#7412 = LINE('',#7413,#7414); +#7413 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#7414 = VECTOR('',#7415,1.); +#7415 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7416 = ORIENTED_EDGE('',*,*,#6538,.T.); +#7417 = ORIENTED_EDGE('',*,*,#7380,.T.); +#7418 = PLANE('',#7419); +#7419 = AXIS2_PLACEMENT_3D('',#7420,#7421,#7422); +#7420 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#7421 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7422 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7423 = ADVANCED_FACE('',(#7424),#7442,.F.); +#7424 = FACE_BOUND('',#7425,.F.); +#7425 = EDGE_LOOP('',(#7426,#7434,#7435,#7436)); +#7426 = ORIENTED_EDGE('',*,*,#7427,.T.); +#7427 = EDGE_CURVE('',#7428,#7404,#7430,.T.); +#7428 = VERTEX_POINT('',#7429); +#7429 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7430 = LINE('',#7431,#7432); +#7431 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7432 = VECTOR('',#7433,1.); +#7433 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7434 = ORIENTED_EDGE('',*,*,#7411,.T.); +#7435 = ORIENTED_EDGE('',*,*,#6530,.F.); +#7436 = ORIENTED_EDGE('',*,*,#7437,.F.); +#7437 = EDGE_CURVE('',#7428,#6523,#7438,.T.); +#7438 = LINE('',#7439,#7440); +#7439 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7440 = VECTOR('',#7441,1.); +#7441 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7442 = PLANE('',#7443); +#7443 = AXIS2_PLACEMENT_3D('',#7444,#7445,#7446); +#7444 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7445 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7446 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7447 = ADVANCED_FACE('',(#7448),#7473,.F.); +#7448 = FACE_BOUND('',#7449,.F.); +#7449 = EDGE_LOOP('',(#7450,#7451,#7459,#7465,#7466,#7467)); +#7450 = ORIENTED_EDGE('',*,*,#7187,.T.); +#7451 = ORIENTED_EDGE('',*,*,#7452,.T.); +#7452 = EDGE_CURVE('',#7180,#7453,#7455,.T.); +#7453 = VERTEX_POINT('',#7454); +#7454 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#7455 = LINE('',#7456,#7457); +#7456 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#7457 = VECTOR('',#7458,1.); +#7458 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7459 = ORIENTED_EDGE('',*,*,#7460,.T.); +#7460 = EDGE_CURVE('',#7453,#7428,#7461,.T.); +#7461 = LINE('',#7462,#7463); +#7462 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#7463 = VECTOR('',#7464,1.); +#7464 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7465 = ORIENTED_EDGE('',*,*,#7437,.T.); +#7466 = ORIENTED_EDGE('',*,*,#6522,.T.); +#7467 = ORIENTED_EDGE('',*,*,#7468,.T.); +#7468 = EDGE_CURVE('',#6515,#7188,#7469,.T.); +#7469 = LINE('',#7470,#7471); +#7470 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#7471 = VECTOR('',#7472,1.); +#7472 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7473 = PLANE('',#7474); +#7474 = AXIS2_PLACEMENT_3D('',#7475,#7476,#7477); +#7475 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#7476 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7477 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7478 = ADVANCED_FACE('',(#7479),#7490,.F.); +#7479 = FACE_BOUND('',#7480,.F.); +#7480 = EDGE_LOOP('',(#7481,#7482,#7483,#7489)); +#7481 = ORIENTED_EDGE('',*,*,#7468,.F.); +#7482 = ORIENTED_EDGE('',*,*,#6514,.T.); +#7483 = ORIENTED_EDGE('',*,*,#7484,.T.); +#7484 = EDGE_CURVE('',#6507,#7196,#7485,.T.); +#7485 = LINE('',#7486,#7487); +#7486 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#7487 = VECTOR('',#7488,1.); +#7488 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7489 = ORIENTED_EDGE('',*,*,#7195,.T.); +#7490 = PLANE('',#7491); +#7491 = AXIS2_PLACEMENT_3D('',#7492,#7493,#7494); +#7492 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7493 = DIRECTION('',(0.,0.,1.)); +#7494 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7495 = ADVANCED_FACE('',(#7496),#7523,.T.); +#7496 = FACE_BOUND('',#7497,.T.); +#7497 = EDGE_LOOP('',(#7498,#7499,#7507,#7515,#7521,#7522)); +#7498 = ORIENTED_EDGE('',*,*,#7203,.T.); +#7499 = ORIENTED_EDGE('',*,*,#7500,.T.); +#7500 = EDGE_CURVE('',#7204,#7501,#7503,.T.); +#7501 = VERTEX_POINT('',#7502); +#7502 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#7503 = LINE('',#7504,#7505); +#7504 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#7505 = VECTOR('',#7506,1.); +#7506 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7507 = ORIENTED_EDGE('',*,*,#7508,.T.); +#7508 = EDGE_CURVE('',#7501,#7509,#7511,.T.); +#7509 = VERTEX_POINT('',#7510); +#7510 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#7511 = LINE('',#7512,#7513); +#7512 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#7513 = VECTOR('',#7514,1.); +#7514 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7515 = ORIENTED_EDGE('',*,*,#7516,.T.); +#7516 = EDGE_CURVE('',#7509,#6499,#7517,.T.); +#7517 = LINE('',#7518,#7519); +#7518 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#7519 = VECTOR('',#7520,1.); +#7520 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7521 = ORIENTED_EDGE('',*,*,#6506,.T.); +#7522 = ORIENTED_EDGE('',*,*,#7484,.T.); +#7523 = PLANE('',#7524); +#7524 = AXIS2_PLACEMENT_3D('',#7525,#7526,#7527); +#7525 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#7526 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7527 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7528 = ADVANCED_FACE('',(#7529),#7547,.F.); +#7529 = FACE_BOUND('',#7530,.F.); +#7530 = EDGE_LOOP('',(#7531,#7539,#7540,#7541)); +#7531 = ORIENTED_EDGE('',*,*,#7532,.T.); +#7532 = EDGE_CURVE('',#7533,#7509,#7535,.T.); +#7533 = VERTEX_POINT('',#7534); +#7534 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7535 = LINE('',#7536,#7537); +#7536 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7537 = VECTOR('',#7538,1.); +#7538 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7539 = ORIENTED_EDGE('',*,*,#7516,.T.); +#7540 = ORIENTED_EDGE('',*,*,#6498,.F.); +#7541 = ORIENTED_EDGE('',*,*,#7542,.F.); +#7542 = EDGE_CURVE('',#7533,#6491,#7543,.T.); +#7543 = LINE('',#7544,#7545); +#7544 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7545 = VECTOR('',#7546,1.); +#7546 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7547 = PLANE('',#7548); +#7548 = AXIS2_PLACEMENT_3D('',#7549,#7550,#7551); +#7549 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7550 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7551 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7552 = ADVANCED_FACE('',(#7553),#7578,.F.); +#7553 = FACE_BOUND('',#7554,.F.); +#7554 = EDGE_LOOP('',(#7555,#7556,#7564,#7570,#7571,#7572)); +#7555 = ORIENTED_EDGE('',*,*,#7219,.T.); +#7556 = ORIENTED_EDGE('',*,*,#7557,.T.); +#7557 = EDGE_CURVE('',#7212,#7558,#7560,.T.); +#7558 = VERTEX_POINT('',#7559); +#7559 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#7560 = LINE('',#7561,#7562); +#7561 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#7562 = VECTOR('',#7563,1.); +#7563 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7564 = ORIENTED_EDGE('',*,*,#7565,.T.); +#7565 = EDGE_CURVE('',#7558,#7533,#7566,.T.); +#7566 = LINE('',#7567,#7568); +#7567 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#7568 = VECTOR('',#7569,1.); +#7569 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7570 = ORIENTED_EDGE('',*,*,#7542,.T.); +#7571 = ORIENTED_EDGE('',*,*,#6490,.T.); +#7572 = ORIENTED_EDGE('',*,*,#7573,.T.); +#7573 = EDGE_CURVE('',#6483,#7220,#7574,.T.); +#7574 = LINE('',#7575,#7576); +#7575 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#7576 = VECTOR('',#7577,1.); +#7577 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7578 = PLANE('',#7579); +#7579 = AXIS2_PLACEMENT_3D('',#7580,#7581,#7582); +#7580 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#7581 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7582 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7583 = ADVANCED_FACE('',(#7584),#7595,.F.); +#7584 = FACE_BOUND('',#7585,.F.); +#7585 = EDGE_LOOP('',(#7586,#7587,#7593,#7594)); +#7586 = ORIENTED_EDGE('',*,*,#6482,.T.); +#7587 = ORIENTED_EDGE('',*,*,#7588,.T.); +#7588 = EDGE_CURVE('',#6475,#7228,#7589,.T.); +#7589 = LINE('',#7590,#7591); +#7590 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#7591 = VECTOR('',#7592,1.); +#7592 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7593 = ORIENTED_EDGE('',*,*,#7227,.T.); +#7594 = ORIENTED_EDGE('',*,*,#7573,.F.); +#7595 = PLANE('',#7596); +#7596 = AXIS2_PLACEMENT_3D('',#7597,#7598,#7599); +#7597 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7598 = DIRECTION('',(0.,0.,1.)); +#7599 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7600 = ADVANCED_FACE('',(#7601),#7628,.T.); +#7601 = FACE_BOUND('',#7602,.T.); +#7602 = EDGE_LOOP('',(#7603,#7604,#7612,#7620,#7626,#7627)); +#7603 = ORIENTED_EDGE('',*,*,#7235,.T.); +#7604 = ORIENTED_EDGE('',*,*,#7605,.T.); +#7605 = EDGE_CURVE('',#7236,#7606,#7608,.T.); +#7606 = VERTEX_POINT('',#7607); +#7607 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#7608 = LINE('',#7609,#7610); +#7609 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#7610 = VECTOR('',#7611,1.); +#7611 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7612 = ORIENTED_EDGE('',*,*,#7613,.T.); +#7613 = EDGE_CURVE('',#7606,#7614,#7616,.T.); +#7614 = VERTEX_POINT('',#7615); +#7615 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#7616 = LINE('',#7617,#7618); +#7617 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#7618 = VECTOR('',#7619,1.); +#7619 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7620 = ORIENTED_EDGE('',*,*,#7621,.T.); +#7621 = EDGE_CURVE('',#7614,#6467,#7622,.T.); +#7622 = LINE('',#7623,#7624); +#7623 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#7624 = VECTOR('',#7625,1.); +#7625 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7626 = ORIENTED_EDGE('',*,*,#6474,.T.); +#7627 = ORIENTED_EDGE('',*,*,#7588,.T.); +#7628 = PLANE('',#7629); +#7629 = AXIS2_PLACEMENT_3D('',#7630,#7631,#7632); +#7630 = CARTESIAN_POINT('',(6.75,-0.515451356496,0.330008245993)); +#7631 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7632 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7633 = ADVANCED_FACE('',(#7634),#7652,.F.); +#7634 = FACE_BOUND('',#7635,.F.); +#7635 = EDGE_LOOP('',(#7636,#7644,#7645,#7646)); +#7636 = ORIENTED_EDGE('',*,*,#7637,.T.); +#7637 = EDGE_CURVE('',#7638,#7614,#7640,.T.); +#7638 = VERTEX_POINT('',#7639); +#7639 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7640 = LINE('',#7641,#7642); +#7641 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7642 = VECTOR('',#7643,1.); +#7643 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7644 = ORIENTED_EDGE('',*,*,#7621,.T.); +#7645 = ORIENTED_EDGE('',*,*,#6466,.F.); +#7646 = ORIENTED_EDGE('',*,*,#7647,.F.); +#7647 = EDGE_CURVE('',#7638,#6459,#7648,.T.); +#7648 = LINE('',#7649,#7650); +#7649 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7650 = VECTOR('',#7651,1.); +#7651 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7652 = PLANE('',#7653); +#7653 = AXIS2_PLACEMENT_3D('',#7654,#7655,#7656); +#7654 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7655 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7656 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7657 = ADVANCED_FACE('',(#7658),#7683,.F.); +#7658 = FACE_BOUND('',#7659,.F.); +#7659 = EDGE_LOOP('',(#7660,#7661,#7669,#7675,#7676,#7677)); +#7660 = ORIENTED_EDGE('',*,*,#7251,.T.); +#7661 = ORIENTED_EDGE('',*,*,#7662,.T.); +#7662 = EDGE_CURVE('',#7244,#7663,#7665,.T.); +#7663 = VERTEX_POINT('',#7664); +#7664 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#7665 = LINE('',#7666,#7667); +#7666 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#7667 = VECTOR('',#7668,1.); +#7668 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7669 = ORIENTED_EDGE('',*,*,#7670,.T.); +#7670 = EDGE_CURVE('',#7663,#7638,#7671,.T.); +#7671 = LINE('',#7672,#7673); +#7672 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#7673 = VECTOR('',#7674,1.); +#7674 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7675 = ORIENTED_EDGE('',*,*,#7647,.T.); +#7676 = ORIENTED_EDGE('',*,*,#6458,.T.); +#7677 = ORIENTED_EDGE('',*,*,#7678,.T.); +#7678 = EDGE_CURVE('',#6451,#7000,#7679,.T.); +#7679 = LINE('',#7680,#7681); +#7680 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#7681 = VECTOR('',#7682,1.); +#7682 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7683 = PLANE('',#7684); +#7684 = AXIS2_PLACEMENT_3D('',#7685,#7686,#7687); +#7685 = CARTESIAN_POINT('',(8.25,-0.515451356496,0.330008245993)); +#7686 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7687 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7688 = ADVANCED_FACE('',(#7689),#7695,.F.); +#7689 = FACE_BOUND('',#7690,.F.); +#7690 = EDGE_LOOP('',(#7691,#7692,#7693,#7694)); +#7691 = ORIENTED_EDGE('',*,*,#6608,.T.); +#7692 = ORIENTED_EDGE('',*,*,#6999,.T.); +#7693 = ORIENTED_EDGE('',*,*,#7678,.F.); +#7694 = ORIENTED_EDGE('',*,*,#6450,.T.); +#7695 = PLANE('',#7696); +#7696 = AXIS2_PLACEMENT_3D('',#7697,#7698,#7699); +#7697 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7698 = DIRECTION('',(0.,0.,1.)); +#7699 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7700 = ADVANCED_FACE('',(#7701),#7728,.F.); +#7701 = FACE_BOUND('',#7702,.F.); +#7702 = EDGE_LOOP('',(#7703,#7704,#7705,#7706,#7712,#7713,#7722)); +#7703 = ORIENTED_EDGE('',*,*,#6683,.T.); +#7704 = ORIENTED_EDGE('',*,*,#6594,.F.); +#7705 = ORIENTED_EDGE('',*,*,#7274,.T.); +#7706 = ORIENTED_EDGE('',*,*,#7707,.T.); +#7707 = EDGE_CURVE('',#7267,#6946,#7708,.T.); +#7708 = LINE('',#7709,#7710); +#7709 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#7710 = VECTOR('',#7711,1.); +#7711 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7712 = ORIENTED_EDGE('',*,*,#6953,.F.); +#7713 = ORIENTED_EDGE('',*,*,#7714,.F.); +#7714 = EDGE_CURVE('',#7715,#6954,#7717,.T.); +#7715 = VERTEX_POINT('',#7716); +#7716 = CARTESIAN_POINT('',(9.1,1.,3.65)); +#7717 = CIRCLE('',#7718,0.5); +#7718 = AXIS2_PLACEMENT_3D('',#7719,#7720,#7721); +#7719 = CARTESIAN_POINT('',(9.1,1.,4.15)); +#7720 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7721 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7722 = ORIENTED_EDGE('',*,*,#7723,.T.); +#7723 = EDGE_CURVE('',#7715,#6676,#7724,.T.); +#7724 = LINE('',#7725,#7726); +#7725 = CARTESIAN_POINT('',(9.1,-0.825,3.65)); +#7726 = VECTOR('',#7727,1.); +#7727 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7728 = PLANE('',#7729); +#7729 = AXIS2_PLACEMENT_3D('',#7730,#7731,#7732); +#7730 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#7731 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7732 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7733 = ADVANCED_FACE('',(#7734),#7745,.T.); +#7734 = FACE_BOUND('',#7735,.T.); +#7735 = EDGE_LOOP('',(#7736,#7737,#7738,#7739)); +#7736 = ORIENTED_EDGE('',*,*,#6806,.F.); +#7737 = ORIENTED_EDGE('',*,*,#6651,.T.); +#7738 = ORIENTED_EDGE('',*,*,#7008,.T.); +#7739 = ORIENTED_EDGE('',*,*,#7740,.T.); +#7740 = EDGE_CURVE('',#7009,#6807,#7741,.T.); +#7741 = LINE('',#7742,#7743); +#7742 = CARTESIAN_POINT('',(8.,2.35,7.)); +#7743 = VECTOR('',#7744,1.); +#7744 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7745 = PLANE('',#7746); +#7746 = AXIS2_PLACEMENT_3D('',#7747,#7748,#7749); +#7747 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#7748 = DIRECTION('',(0.,0.,1.)); +#7749 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7750 = ADVANCED_FACE('',(#7751),#7762,.F.); +#7751 = FACE_BOUND('',#7752,.F.); +#7752 = EDGE_LOOP('',(#7753,#7759,#7760,#7761)); +#7753 = ORIENTED_EDGE('',*,*,#7754,.T.); +#7754 = EDGE_CURVE('',#6627,#7715,#7755,.T.); +#7755 = LINE('',#7756,#7757); +#7756 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#7757 = VECTOR('',#7758,1.); +#7758 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7759 = ORIENTED_EDGE('',*,*,#7714,.T.); +#7760 = ORIENTED_EDGE('',*,*,#6961,.F.); +#7761 = ORIENTED_EDGE('',*,*,#6634,.T.); +#7762 = CYLINDRICAL_SURFACE('',#7763,0.5); +#7763 = AXIS2_PLACEMENT_3D('',#7764,#7765,#7766); +#7764 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#7765 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#7766 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7767 = ADVANCED_FACE('',(#7768),#7774,.T.); +#7768 = FACE_BOUND('',#7769,.T.); +#7769 = EDGE_LOOP('',(#7770,#7771,#7772,#7773)); +#7770 = ORIENTED_EDGE('',*,*,#6626,.F.); +#7771 = ORIENTED_EDGE('',*,*,#7754,.T.); +#7772 = ORIENTED_EDGE('',*,*,#7723,.T.); +#7773 = ORIENTED_EDGE('',*,*,#6675,.F.); +#7774 = PLANE('',#7775); +#7775 = AXIS2_PLACEMENT_3D('',#7776,#7777,#7778); +#7776 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#7777 = DIRECTION('',(0.,0.,1.)); +#7778 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7779 = ADVANCED_FACE('',(#7780,#7786,#7820,#7854,#7888),#7922,.T.); +#7780 = FACE_BOUND('',#7781,.T.); +#7781 = EDGE_LOOP('',(#7782,#7783,#7784,#7785)); +#7782 = ORIENTED_EDGE('',*,*,#6945,.T.); +#7783 = ORIENTED_EDGE('',*,*,#6724,.T.); +#7784 = ORIENTED_EDGE('',*,*,#7266,.T.); +#7785 = ORIENTED_EDGE('',*,*,#7707,.T.); +#7786 = FACE_BOUND('',#7787,.T.); +#7787 = EDGE_LOOP('',(#7788,#7798,#7806,#7814)); +#7788 = ORIENTED_EDGE('',*,*,#7789,.F.); +#7789 = EDGE_CURVE('',#7790,#7792,#7794,.T.); +#7790 = VERTEX_POINT('',#7791); +#7791 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#7792 = VERTEX_POINT('',#7793); +#7793 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#7794 = LINE('',#7795,#7796); +#7795 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#7796 = VECTOR('',#7797,1.); +#7797 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7798 = ORIENTED_EDGE('',*,*,#7799,.T.); +#7799 = EDGE_CURVE('',#7790,#7800,#7802,.T.); +#7800 = VERTEX_POINT('',#7801); +#7801 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#7802 = LINE('',#7803,#7804); +#7803 = CARTESIAN_POINT('',(2.035,0.32,1.85)); +#7804 = VECTOR('',#7805,1.); +#7805 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7806 = ORIENTED_EDGE('',*,*,#7807,.T.); +#7807 = EDGE_CURVE('',#7800,#7808,#7810,.T.); +#7808 = VERTEX_POINT('',#7809); +#7809 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#7810 = LINE('',#7811,#7812); +#7811 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#7812 = VECTOR('',#7813,1.); +#7813 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7814 = ORIENTED_EDGE('',*,*,#7815,.T.); +#7815 = EDGE_CURVE('',#7808,#7792,#7816,.T.); +#7816 = LINE('',#7817,#7818); +#7817 = CARTESIAN_POINT('',(2.035,-0.32,1.85)); +#7818 = VECTOR('',#7819,1.); +#7819 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7820 = FACE_BOUND('',#7821,.T.); +#7821 = EDGE_LOOP('',(#7822,#7832,#7840,#7848)); +#7822 = ORIENTED_EDGE('',*,*,#7823,.T.); +#7823 = EDGE_CURVE('',#7824,#7826,#7828,.T.); +#7824 = VERTEX_POINT('',#7825); +#7825 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#7826 = VERTEX_POINT('',#7827); +#7827 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#7828 = LINE('',#7829,#7830); +#7829 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#7830 = VECTOR('',#7831,1.); +#7831 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7832 = ORIENTED_EDGE('',*,*,#7833,.T.); +#7833 = EDGE_CURVE('',#7826,#7834,#7836,.T.); +#7834 = VERTEX_POINT('',#7835); +#7835 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#7836 = LINE('',#7837,#7838); +#7837 = CARTESIAN_POINT('',(3.285,-0.32,1.85)); +#7838 = VECTOR('',#7839,1.); +#7839 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7840 = ORIENTED_EDGE('',*,*,#7841,.F.); +#7841 = EDGE_CURVE('',#7842,#7834,#7844,.T.); +#7842 = VERTEX_POINT('',#7843); +#7843 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#7844 = LINE('',#7845,#7846); +#7845 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#7846 = VECTOR('',#7847,1.); +#7847 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7848 = ORIENTED_EDGE('',*,*,#7849,.T.); +#7849 = EDGE_CURVE('',#7842,#7824,#7850,.T.); +#7850 = LINE('',#7851,#7852); +#7851 = CARTESIAN_POINT('',(3.285,0.32,1.85)); +#7852 = VECTOR('',#7853,1.); +#7853 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7854 = FACE_BOUND('',#7855,.T.); +#7855 = EDGE_LOOP('',(#7856,#7866,#7874,#7882)); +#7856 = ORIENTED_EDGE('',*,*,#7857,.F.); +#7857 = EDGE_CURVE('',#7858,#7860,#7862,.T.); +#7858 = VERTEX_POINT('',#7859); +#7859 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#7860 = VERTEX_POINT('',#7861); +#7861 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#7862 = LINE('',#7863,#7864); +#7863 = CARTESIAN_POINT('',(4.68,-0.2875,1.85)); +#7864 = VECTOR('',#7865,1.); +#7865 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7866 = ORIENTED_EDGE('',*,*,#7867,.T.); +#7867 = EDGE_CURVE('',#7858,#7868,#7870,.T.); +#7868 = VERTEX_POINT('',#7869); +#7869 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#7870 = LINE('',#7871,#7872); +#7871 = CARTESIAN_POINT('',(4.535,0.32,1.85)); +#7872 = VECTOR('',#7873,1.); +#7873 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7874 = ORIENTED_EDGE('',*,*,#7875,.T.); +#7875 = EDGE_CURVE('',#7868,#7876,#7878,.T.); +#7876 = VERTEX_POINT('',#7877); +#7877 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#7878 = LINE('',#7879,#7880); +#7879 = CARTESIAN_POINT('',(5.32,-0.2875,1.85)); +#7880 = VECTOR('',#7881,1.); +#7881 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7882 = ORIENTED_EDGE('',*,*,#7883,.T.); +#7883 = EDGE_CURVE('',#7876,#7860,#7884,.T.); +#7884 = LINE('',#7885,#7886); +#7885 = CARTESIAN_POINT('',(4.535,-0.32,1.85)); +#7886 = VECTOR('',#7887,1.); +#7887 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7888 = FACE_BOUND('',#7889,.T.); +#7889 = EDGE_LOOP('',(#7890,#7900,#7908,#7916)); +#7890 = ORIENTED_EDGE('',*,*,#7891,.T.); +#7891 = EDGE_CURVE('',#7892,#7894,#7896,.T.); +#7892 = VERTEX_POINT('',#7893); +#7893 = CARTESIAN_POINT('',(7.18,0.32,1.85)); +#7894 = VERTEX_POINT('',#7895); +#7895 = CARTESIAN_POINT('',(7.82,0.32,1.85)); +#7896 = LINE('',#7897,#7898); +#7897 = CARTESIAN_POINT('',(5.785,0.32,1.85)); +#7898 = VECTOR('',#7899,1.); +#7899 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7900 = ORIENTED_EDGE('',*,*,#7901,.T.); +#7901 = EDGE_CURVE('',#7894,#7902,#7904,.T.); +#7902 = VERTEX_POINT('',#7903); +#7903 = CARTESIAN_POINT('',(7.82,-0.32,1.85)); +#7904 = LINE('',#7905,#7906); +#7905 = CARTESIAN_POINT('',(7.82,-0.26920299558,1.85)); +#7906 = VECTOR('',#7907,1.); +#7907 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7908 = ORIENTED_EDGE('',*,*,#7909,.T.); +#7909 = EDGE_CURVE('',#7902,#7910,#7912,.T.); +#7910 = VERTEX_POINT('',#7911); +#7911 = CARTESIAN_POINT('',(7.18,-0.32,1.85)); +#7912 = LINE('',#7913,#7914); +#7913 = CARTESIAN_POINT('',(5.785,-0.32,1.85)); +#7914 = VECTOR('',#7915,1.); +#7915 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7916 = ORIENTED_EDGE('',*,*,#7917,.F.); +#7917 = EDGE_CURVE('',#7892,#7910,#7918,.T.); +#7918 = LINE('',#7919,#7920); +#7919 = CARTESIAN_POINT('',(7.18,-0.26920299558,1.85)); +#7920 = VECTOR('',#7921,1.); +#7921 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7922 = PLANE('',#7923); +#7923 = AXIS2_PLACEMENT_3D('',#7924,#7925,#7926); +#7924 = CARTESIAN_POINT('',(3.75,-0.575,1.85)); +#7925 = DIRECTION('',(0.,0.,1.)); +#7926 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7927 = ADVANCED_FACE('',(#7928),#7939,.F.); +#7928 = FACE_BOUND('',#7929,.F.); +#7929 = EDGE_LOOP('',(#7930,#7931,#7937,#7938)); +#7930 = ORIENTED_EDGE('',*,*,#7130,.F.); +#7931 = ORIENTED_EDGE('',*,*,#7932,.T.); +#7932 = EDGE_CURVE('',#7123,#6921,#7933,.T.); +#7933 = LINE('',#7934,#7935); +#7934 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7935 = VECTOR('',#7936,1.); +#7936 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7937 = ORIENTED_EDGE('',*,*,#6928,.F.); +#7938 = ORIENTED_EDGE('',*,*,#6976,.F.); +#7939 = PLANE('',#7940); +#7940 = AXIS2_PLACEMENT_3D('',#7941,#7942,#7943); +#7941 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7942 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7943 = DIRECTION('',(0.,0.,1.)); +#7944 = ADVANCED_FACE('',(#7945),#7956,.F.); +#7945 = FACE_BOUND('',#7946,.F.); +#7946 = EDGE_LOOP('',(#7947,#7948,#7954,#7955)); +#7947 = ORIENTED_EDGE('',*,*,#7122,.F.); +#7948 = ORIENTED_EDGE('',*,*,#7949,.T.); +#7949 = EDGE_CURVE('',#7115,#6913,#7950,.T.); +#7950 = LINE('',#7951,#7952); +#7951 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7952 = VECTOR('',#7953,1.); +#7953 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7954 = ORIENTED_EDGE('',*,*,#6920,.F.); +#7955 = ORIENTED_EDGE('',*,*,#7932,.F.); +#7956 = PLANE('',#7957); +#7957 = AXIS2_PLACEMENT_3D('',#7958,#7959,#7960); +#7958 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7959 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#7960 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7961 = ADVANCED_FACE('',(#7962),#7973,.F.); +#7962 = FACE_BOUND('',#7963,.F.); +#7963 = EDGE_LOOP('',(#7964,#7965,#7971,#7972)); +#7964 = ORIENTED_EDGE('',*,*,#7114,.F.); +#7965 = ORIENTED_EDGE('',*,*,#7966,.T.); +#7966 = EDGE_CURVE('',#7107,#6905,#7967,.T.); +#7967 = LINE('',#7968,#7969); +#7968 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7969 = VECTOR('',#7970,1.); +#7970 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7971 = ORIENTED_EDGE('',*,*,#6912,.F.); +#7972 = ORIENTED_EDGE('',*,*,#7949,.F.); +#7973 = PLANE('',#7974); +#7974 = AXIS2_PLACEMENT_3D('',#7975,#7976,#7977); +#7975 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7976 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7977 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#7978 = ADVANCED_FACE('',(#7979),#7990,.F.); +#7979 = FACE_BOUND('',#7980,.F.); +#7980 = EDGE_LOOP('',(#7981,#7982,#7988,#7989)); +#7981 = ORIENTED_EDGE('',*,*,#7106,.F.); +#7982 = ORIENTED_EDGE('',*,*,#7983,.T.); +#7983 = EDGE_CURVE('',#7098,#6896,#7984,.T.); +#7984 = LINE('',#7985,#7986); +#7985 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#7986 = VECTOR('',#7987,1.); +#7987 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7988 = ORIENTED_EDGE('',*,*,#6904,.F.); +#7989 = ORIENTED_EDGE('',*,*,#7966,.F.); +#7990 = PLANE('',#7991); +#7991 = AXIS2_PLACEMENT_3D('',#7992,#7993,#7994); +#7992 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#7993 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7994 = DIRECTION('',(0.,0.,1.)); +#7995 = ADVANCED_FACE('',(#7996),#8007,.F.); +#7996 = FACE_BOUND('',#7997,.F.); +#7997 = EDGE_LOOP('',(#7998,#7999,#8000,#8001)); +#7998 = ORIENTED_EDGE('',*,*,#6895,.F.); +#7999 = ORIENTED_EDGE('',*,*,#7983,.F.); +#8000 = ORIENTED_EDGE('',*,*,#7097,.F.); +#8001 = ORIENTED_EDGE('',*,*,#8002,.T.); +#8002 = EDGE_CURVE('',#7090,#6888,#8003,.T.); +#8003 = LINE('',#8004,#8005); +#8004 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#8005 = VECTOR('',#8006,1.); +#8006 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8007 = CYLINDRICAL_SURFACE('',#8008,0.75); +#8008 = AXIS2_PLACEMENT_3D('',#8009,#8010,#8011); +#8009 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#8010 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8011 = DIRECTION('',(-0.,0.,-1.)); +#8012 = ADVANCED_FACE('',(#8013),#8024,.F.); +#8013 = FACE_BOUND('',#8014,.F.); +#8014 = EDGE_LOOP('',(#8015,#8016,#8017,#8023)); +#8015 = ORIENTED_EDGE('',*,*,#8002,.F.); +#8016 = ORIENTED_EDGE('',*,*,#7089,.F.); +#8017 = ORIENTED_EDGE('',*,*,#8018,.T.); +#8018 = EDGE_CURVE('',#7082,#6880,#8019,.T.); +#8019 = LINE('',#8020,#8021); +#8020 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#8021 = VECTOR('',#8022,1.); +#8022 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8023 = ORIENTED_EDGE('',*,*,#6887,.F.); +#8024 = PLANE('',#8025); +#8025 = AXIS2_PLACEMENT_3D('',#8026,#8027,#8028); +#8026 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#8027 = DIRECTION('',(-0.,0.,-1.)); +#8028 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8029 = ADVANCED_FACE('',(#8030),#8041,.F.); +#8030 = FACE_BOUND('',#8031,.F.); +#8031 = EDGE_LOOP('',(#8032,#8033,#8039,#8040)); +#8032 = ORIENTED_EDGE('',*,*,#7081,.F.); +#8033 = ORIENTED_EDGE('',*,*,#8034,.T.); +#8034 = EDGE_CURVE('',#7074,#6872,#8035,.T.); +#8035 = LINE('',#8036,#8037); +#8036 = CARTESIAN_POINT('',(1.,2.35,7.)); +#8037 = VECTOR('',#8038,1.); +#8038 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8039 = ORIENTED_EDGE('',*,*,#6879,.F.); +#8040 = ORIENTED_EDGE('',*,*,#8018,.F.); +#8041 = PLANE('',#8042); +#8042 = AXIS2_PLACEMENT_3D('',#8043,#8044,#8045); +#8043 = CARTESIAN_POINT('',(1.,2.35,7.)); +#8044 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8045 = DIRECTION('',(0.,-0.,-1.)); +#8046 = ADVANCED_FACE('',(#8047),#8058,.T.); +#8047 = FACE_BOUND('',#8048,.T.); +#8048 = EDGE_LOOP('',(#8049,#8050,#8056,#8057)); +#8049 = ORIENTED_EDGE('',*,*,#6871,.F.); +#8050 = ORIENTED_EDGE('',*,*,#8051,.F.); +#8051 = EDGE_CURVE('',#7066,#6864,#8052,.T.); +#8052 = LINE('',#8053,#8054); +#8053 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#8054 = VECTOR('',#8055,1.); +#8055 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8056 = ORIENTED_EDGE('',*,*,#7073,.T.); +#8057 = ORIENTED_EDGE('',*,*,#8034,.T.); +#8058 = PLANE('',#8059); +#8059 = AXIS2_PLACEMENT_3D('',#8060,#8061,#8062); +#8060 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#8061 = DIRECTION('',(0.,0.,1.)); +#8062 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8063 = ADVANCED_FACE('',(#8064),#8075,.T.); +#8064 = FACE_BOUND('',#8065,.T.); +#8065 = EDGE_LOOP('',(#8066,#8067,#8068,#8069)); +#8066 = ORIENTED_EDGE('',*,*,#7065,.F.); +#8067 = ORIENTED_EDGE('',*,*,#8051,.T.); +#8068 = ORIENTED_EDGE('',*,*,#6863,.F.); +#8069 = ORIENTED_EDGE('',*,*,#8070,.F.); +#8070 = EDGE_CURVE('',#7058,#6856,#8071,.T.); +#8071 = LINE('',#8072,#8073); +#8072 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#8073 = VECTOR('',#8074,1.); +#8074 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8075 = PLANE('',#8076); +#8076 = AXIS2_PLACEMENT_3D('',#8077,#8078,#8079); +#8077 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#8078 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8079 = DIRECTION('',(0.,-0.,-1.)); +#8080 = ADVANCED_FACE('',(#8081),#8092,.T.); +#8081 = FACE_BOUND('',#8082,.T.); +#8082 = EDGE_LOOP('',(#8083,#8089,#8090,#8091)); +#8083 = ORIENTED_EDGE('',*,*,#8084,.F.); +#8084 = EDGE_CURVE('',#7049,#6847,#8085,.T.); +#8085 = LINE('',#8086,#8087); +#8086 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#8087 = VECTOR('',#8088,1.); +#8088 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8089 = ORIENTED_EDGE('',*,*,#7057,.F.); +#8090 = ORIENTED_EDGE('',*,*,#8070,.T.); +#8091 = ORIENTED_EDGE('',*,*,#6855,.F.); +#8092 = PLANE('',#8093); +#8093 = AXIS2_PLACEMENT_3D('',#8094,#8095,#8096); +#8094 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#8095 = DIRECTION('',(0.,0.,1.)); +#8096 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8097 = ADVANCED_FACE('',(#8098),#8109,.F.); +#8098 = FACE_BOUND('',#8099,.F.); +#8099 = EDGE_LOOP('',(#8100,#8101,#8102,#8108)); +#8100 = ORIENTED_EDGE('',*,*,#8084,.F.); +#8101 = ORIENTED_EDGE('',*,*,#7048,.T.); +#8102 = ORIENTED_EDGE('',*,*,#8103,.T.); +#8103 = EDGE_CURVE('',#7041,#6839,#8104,.T.); +#8104 = LINE('',#8105,#8106); +#8105 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#8106 = VECTOR('',#8107,1.); +#8107 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8108 = ORIENTED_EDGE('',*,*,#6846,.F.); +#8109 = CYLINDRICAL_SURFACE('',#8110,0.75); +#8110 = AXIS2_PLACEMENT_3D('',#8111,#8112,#8113); +#8111 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#8112 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8113 = DIRECTION('',(0.,-0.,-1.)); +#8114 = ADVANCED_FACE('',(#8115),#8126,.T.); +#8115 = FACE_BOUND('',#8116,.T.); +#8116 = EDGE_LOOP('',(#8117,#8118,#8119,#8120)); +#8117 = ORIENTED_EDGE('',*,*,#7040,.F.); +#8118 = ORIENTED_EDGE('',*,*,#8103,.T.); +#8119 = ORIENTED_EDGE('',*,*,#6838,.F.); +#8120 = ORIENTED_EDGE('',*,*,#8121,.F.); +#8121 = EDGE_CURVE('',#7033,#6831,#8122,.T.); +#8122 = LINE('',#8123,#8124); +#8123 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#8124 = VECTOR('',#8125,1.); +#8125 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8126 = PLANE('',#8127); +#8127 = AXIS2_PLACEMENT_3D('',#8128,#8129,#8130); +#8128 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#8129 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8130 = DIRECTION('',(0.,0.,1.)); +#8131 = ADVANCED_FACE('',(#8132),#8143,.T.); +#8132 = FACE_BOUND('',#8133,.T.); +#8133 = EDGE_LOOP('',(#8134,#8135,#8136,#8137)); +#8134 = ORIENTED_EDGE('',*,*,#7032,.F.); +#8135 = ORIENTED_EDGE('',*,*,#8121,.T.); +#8136 = ORIENTED_EDGE('',*,*,#6830,.F.); +#8137 = ORIENTED_EDGE('',*,*,#8138,.F.); +#8138 = EDGE_CURVE('',#7025,#6823,#8139,.T.); +#8139 = LINE('',#8140,#8141); +#8140 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#8141 = VECTOR('',#8142,1.); +#8142 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8143 = PLANE('',#8144); +#8144 = AXIS2_PLACEMENT_3D('',#8145,#8146,#8147); +#8145 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#8146 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#8147 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#8148 = ADVANCED_FACE('',(#8149),#8160,.T.); +#8149 = FACE_BOUND('',#8150,.T.); +#8150 = EDGE_LOOP('',(#8151,#8152,#8153,#8154)); +#8151 = ORIENTED_EDGE('',*,*,#7024,.F.); +#8152 = ORIENTED_EDGE('',*,*,#8138,.T.); +#8153 = ORIENTED_EDGE('',*,*,#6822,.F.); +#8154 = ORIENTED_EDGE('',*,*,#8155,.F.); +#8155 = EDGE_CURVE('',#7017,#6815,#8156,.T.); +#8156 = LINE('',#8157,#8158); +#8157 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#8158 = VECTOR('',#8159,1.); +#8159 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8160 = PLANE('',#8161); +#8161 = AXIS2_PLACEMENT_3D('',#8162,#8163,#8164); +#8162 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#8163 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#8164 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#8165 = ADVANCED_FACE('',(#8166),#8172,.T.); +#8166 = FACE_BOUND('',#8167,.T.); +#8167 = EDGE_LOOP('',(#8168,#8169,#8170,#8171)); +#8168 = ORIENTED_EDGE('',*,*,#7016,.F.); +#8169 = ORIENTED_EDGE('',*,*,#8155,.T.); +#8170 = ORIENTED_EDGE('',*,*,#6814,.F.); +#8171 = ORIENTED_EDGE('',*,*,#7740,.F.); +#8172 = PLANE('',#8173); +#8173 = AXIS2_PLACEMENT_3D('',#8174,#8175,#8176); +#8174 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#8175 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8176 = DIRECTION('',(0.,0.,1.)); +#8177 = ADVANCED_FACE('',(#8178),#8189,.F.); +#8178 = FACE_BOUND('',#8179,.F.); +#8179 = EDGE_LOOP('',(#8180,#8181,#8182,#8188)); +#8180 = ORIENTED_EDGE('',*,*,#7243,.T.); +#8181 = ORIENTED_EDGE('',*,*,#7605,.T.); +#8182 = ORIENTED_EDGE('',*,*,#8183,.F.); +#8183 = EDGE_CURVE('',#7663,#7606,#8184,.T.); +#8184 = LINE('',#8185,#8186); +#8185 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#8186 = VECTOR('',#8187,1.); +#8187 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8188 = ORIENTED_EDGE('',*,*,#7662,.F.); +#8189 = PLANE('',#8190); +#8190 = AXIS2_PLACEMENT_3D('',#8191,#8192,#8193); +#8191 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#8192 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8193 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8194 = ADVANCED_FACE('',(#8195),#8206,.F.); +#8195 = FACE_BOUND('',#8196,.F.); +#8196 = EDGE_LOOP('',(#8197,#8198,#8199,#8205)); +#8197 = ORIENTED_EDGE('',*,*,#7211,.T.); +#8198 = ORIENTED_EDGE('',*,*,#7500,.T.); +#8199 = ORIENTED_EDGE('',*,*,#8200,.F.); +#8200 = EDGE_CURVE('',#7558,#7501,#8201,.T.); +#8201 = LINE('',#8202,#8203); +#8202 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#8203 = VECTOR('',#8204,1.); +#8204 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8205 = ORIENTED_EDGE('',*,*,#7557,.F.); +#8206 = PLANE('',#8207); +#8207 = AXIS2_PLACEMENT_3D('',#8208,#8209,#8210); +#8208 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#8209 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8210 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8211 = ADVANCED_FACE('',(#8212),#8223,.F.); +#8212 = FACE_BOUND('',#8213,.F.); +#8213 = EDGE_LOOP('',(#8214,#8215,#8216,#8222)); +#8214 = ORIENTED_EDGE('',*,*,#7179,.T.); +#8215 = ORIENTED_EDGE('',*,*,#7395,.T.); +#8216 = ORIENTED_EDGE('',*,*,#8217,.F.); +#8217 = EDGE_CURVE('',#7453,#7396,#8218,.T.); +#8218 = LINE('',#8219,#8220); +#8219 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#8220 = VECTOR('',#8221,1.); +#8221 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8222 = ORIENTED_EDGE('',*,*,#7452,.F.); +#8223 = PLANE('',#8224); +#8224 = AXIS2_PLACEMENT_3D('',#8225,#8226,#8227); +#8225 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#8226 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8227 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8228 = ADVANCED_FACE('',(#8229),#8240,.F.); +#8229 = FACE_BOUND('',#8230,.F.); +#8230 = EDGE_LOOP('',(#8231,#8232,#8233,#8239)); +#8231 = ORIENTED_EDGE('',*,*,#7147,.T.); +#8232 = ORIENTED_EDGE('',*,*,#7290,.T.); +#8233 = ORIENTED_EDGE('',*,*,#8234,.F.); +#8234 = EDGE_CURVE('',#7348,#7291,#8235,.T.); +#8235 = LINE('',#8236,#8237); +#8236 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#8237 = VECTOR('',#8238,1.); +#8238 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8239 = ORIENTED_EDGE('',*,*,#7347,.F.); +#8240 = PLANE('',#8241); +#8241 = AXIS2_PLACEMENT_3D('',#8242,#8243,#8244); +#8242 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#8243 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8244 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8245 = ADVANCED_FACE('',(#8246,#8252),#8286,.F.); +#8246 = FACE_BOUND('',#8247,.F.); +#8247 = EDGE_LOOP('',(#8248,#8249,#8250,#8251)); +#8248 = ORIENTED_EDGE('',*,*,#8234,.T.); +#8249 = ORIENTED_EDGE('',*,*,#7298,.T.); +#8250 = ORIENTED_EDGE('',*,*,#7322,.F.); +#8251 = ORIENTED_EDGE('',*,*,#7355,.F.); +#8252 = FACE_BOUND('',#8253,.F.); +#8253 = EDGE_LOOP('',(#8254,#8264,#8272,#8280)); +#8254 = ORIENTED_EDGE('',*,*,#8255,.F.); +#8255 = EDGE_CURVE('',#8256,#8258,#8260,.T.); +#8256 = VERTEX_POINT('',#8257); +#8257 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#8258 = VERTEX_POINT('',#8259); +#8259 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#8260 = LINE('',#8261,#8262); +#8261 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#8262 = VECTOR('',#8263,1.); +#8263 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8264 = ORIENTED_EDGE('',*,*,#8265,.T.); +#8265 = EDGE_CURVE('',#8256,#8266,#8268,.T.); +#8266 = VERTEX_POINT('',#8267); +#8267 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#8268 = LINE('',#8269,#8270); +#8269 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#8270 = VECTOR('',#8271,1.); +#8271 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8272 = ORIENTED_EDGE('',*,*,#8273,.T.); +#8273 = EDGE_CURVE('',#8266,#8274,#8276,.T.); +#8274 = VERTEX_POINT('',#8275); +#8275 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#8276 = LINE('',#8277,#8278); +#8277 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#8278 = VECTOR('',#8279,1.); +#8279 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8280 = ORIENTED_EDGE('',*,*,#8281,.T.); +#8281 = EDGE_CURVE('',#8274,#8258,#8282,.T.); +#8282 = LINE('',#8283,#8284); +#8283 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#8284 = VECTOR('',#8285,1.); +#8285 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8286 = PLANE('',#8287); +#8287 = AXIS2_PLACEMENT_3D('',#8288,#8289,#8290); +#8288 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#8289 = DIRECTION('',(0.,0.,1.)); +#8290 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8291 = ADVANCED_FACE('',(#8292,#8298),#8332,.F.); +#8292 = FACE_BOUND('',#8293,.F.); +#8293 = EDGE_LOOP('',(#8294,#8295,#8296,#8297)); +#8294 = ORIENTED_EDGE('',*,*,#8217,.T.); +#8295 = ORIENTED_EDGE('',*,*,#7403,.T.); +#8296 = ORIENTED_EDGE('',*,*,#7427,.F.); +#8297 = ORIENTED_EDGE('',*,*,#7460,.F.); +#8298 = FACE_BOUND('',#8299,.F.); +#8299 = EDGE_LOOP('',(#8300,#8310,#8318,#8326)); +#8300 = ORIENTED_EDGE('',*,*,#8301,.T.); +#8301 = EDGE_CURVE('',#8302,#8304,#8306,.T.); +#8302 = VERTEX_POINT('',#8303); +#8303 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#8304 = VERTEX_POINT('',#8305); +#8305 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#8306 = LINE('',#8307,#8308); +#8307 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#8308 = VECTOR('',#8309,1.); +#8309 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8310 = ORIENTED_EDGE('',*,*,#8311,.T.); +#8311 = EDGE_CURVE('',#8304,#8312,#8314,.T.); +#8312 = VERTEX_POINT('',#8313); +#8313 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#8314 = LINE('',#8315,#8316); +#8315 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#8316 = VECTOR('',#8317,1.); +#8317 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8318 = ORIENTED_EDGE('',*,*,#8319,.F.); +#8319 = EDGE_CURVE('',#8320,#8312,#8322,.T.); +#8320 = VERTEX_POINT('',#8321); +#8321 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#8322 = LINE('',#8323,#8324); +#8323 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#8324 = VECTOR('',#8325,1.); +#8325 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8326 = ORIENTED_EDGE('',*,*,#8327,.T.); +#8327 = EDGE_CURVE('',#8320,#8302,#8328,.T.); +#8328 = LINE('',#8329,#8330); +#8329 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#8330 = VECTOR('',#8331,1.); +#8331 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8332 = PLANE('',#8333); +#8333 = AXIS2_PLACEMENT_3D('',#8334,#8335,#8336); +#8334 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#8335 = DIRECTION('',(0.,0.,1.)); +#8336 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8337 = ADVANCED_FACE('',(#8338,#8344),#8378,.F.); +#8338 = FACE_BOUND('',#8339,.F.); +#8339 = EDGE_LOOP('',(#8340,#8341,#8342,#8343)); +#8340 = ORIENTED_EDGE('',*,*,#8200,.T.); +#8341 = ORIENTED_EDGE('',*,*,#7508,.T.); +#8342 = ORIENTED_EDGE('',*,*,#7532,.F.); +#8343 = ORIENTED_EDGE('',*,*,#7565,.F.); +#8344 = FACE_BOUND('',#8345,.F.); +#8345 = EDGE_LOOP('',(#8346,#8356,#8364,#8372)); +#8346 = ORIENTED_EDGE('',*,*,#8347,.F.); +#8347 = EDGE_CURVE('',#8348,#8350,#8352,.T.); +#8348 = VERTEX_POINT('',#8349); +#8349 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#8350 = VERTEX_POINT('',#8351); +#8351 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#8352 = LINE('',#8353,#8354); +#8353 = CARTESIAN_POINT('',(4.68,0.25,0.3)); +#8354 = VECTOR('',#8355,1.); +#8355 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8356 = ORIENTED_EDGE('',*,*,#8357,.T.); +#8357 = EDGE_CURVE('',#8348,#8358,#8360,.T.); +#8358 = VERTEX_POINT('',#8359); +#8359 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#8360 = LINE('',#8361,#8362); +#8361 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#8362 = VECTOR('',#8363,1.); +#8363 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8364 = ORIENTED_EDGE('',*,*,#8365,.T.); +#8365 = EDGE_CURVE('',#8358,#8366,#8368,.T.); +#8366 = VERTEX_POINT('',#8367); +#8367 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#8368 = LINE('',#8369,#8370); +#8369 = CARTESIAN_POINT('',(5.32,0.25,0.3)); +#8370 = VECTOR('',#8371,1.); +#8371 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8372 = ORIENTED_EDGE('',*,*,#8373,.T.); +#8373 = EDGE_CURVE('',#8366,#8350,#8374,.T.); +#8374 = LINE('',#8375,#8376); +#8375 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#8376 = VECTOR('',#8377,1.); +#8377 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8378 = PLANE('',#8379); +#8379 = AXIS2_PLACEMENT_3D('',#8380,#8381,#8382); +#8380 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#8381 = DIRECTION('',(0.,0.,1.)); +#8382 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8383 = ADVANCED_FACE('',(#8384,#8390),#8424,.F.); +#8384 = FACE_BOUND('',#8385,.F.); +#8385 = EDGE_LOOP('',(#8386,#8387,#8388,#8389)); +#8386 = ORIENTED_EDGE('',*,*,#8183,.T.); +#8387 = ORIENTED_EDGE('',*,*,#7613,.T.); +#8388 = ORIENTED_EDGE('',*,*,#7637,.F.); +#8389 = ORIENTED_EDGE('',*,*,#7670,.F.); +#8390 = FACE_BOUND('',#8391,.F.); +#8391 = EDGE_LOOP('',(#8392,#8402,#8410,#8418)); +#8392 = ORIENTED_EDGE('',*,*,#8393,.T.); +#8393 = EDGE_CURVE('',#8394,#8396,#8398,.T.); +#8394 = VERTEX_POINT('',#8395); +#8395 = CARTESIAN_POINT('',(7.18,0.32,0.3)); +#8396 = VERTEX_POINT('',#8397); +#8397 = CARTESIAN_POINT('',(7.82,0.32,0.3)); +#8398 = LINE('',#8399,#8400); +#8399 = CARTESIAN_POINT('',(8.035,0.32,0.3)); +#8400 = VECTOR('',#8401,1.); +#8401 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8402 = ORIENTED_EDGE('',*,*,#8403,.T.); +#8403 = EDGE_CURVE('',#8396,#8404,#8406,.T.); +#8404 = VERTEX_POINT('',#8405); +#8405 = CARTESIAN_POINT('',(7.82,-0.32,0.3)); +#8406 = LINE('',#8407,#8408); +#8407 = CARTESIAN_POINT('',(7.82,0.26829700442,0.3)); +#8408 = VECTOR('',#8409,1.); +#8409 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8410 = ORIENTED_EDGE('',*,*,#8411,.T.); +#8411 = EDGE_CURVE('',#8404,#8412,#8414,.T.); +#8412 = VERTEX_POINT('',#8413); +#8413 = CARTESIAN_POINT('',(7.18,-0.32,0.3)); +#8414 = LINE('',#8415,#8416); +#8415 = CARTESIAN_POINT('',(8.035,-0.32,0.3)); +#8416 = VECTOR('',#8417,1.); +#8417 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8418 = ORIENTED_EDGE('',*,*,#8419,.F.); +#8419 = EDGE_CURVE('',#8394,#8412,#8420,.T.); +#8420 = LINE('',#8421,#8422); +#8421 = CARTESIAN_POINT('',(7.18,0.26829700442,0.3)); +#8422 = VECTOR('',#8423,1.); +#8423 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8424 = PLANE('',#8425); +#8425 = AXIS2_PLACEMENT_3D('',#8426,#8427,#8428); +#8426 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#8427 = DIRECTION('',(0.,0.,1.)); +#8428 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8429 = ADVANCED_FACE('',(#8430),#8455,.T.); +#8430 = FACE_BOUND('',#8431,.T.); +#8431 = EDGE_LOOP('',(#8432,#8433,#8441,#8449)); +#8432 = ORIENTED_EDGE('',*,*,#7789,.T.); +#8433 = ORIENTED_EDGE('',*,*,#8434,.T.); +#8434 = EDGE_CURVE('',#7792,#8435,#8437,.T.); +#8435 = VERTEX_POINT('',#8436); +#8436 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#8437 = LINE('',#8438,#8439); +#8438 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#8439 = VECTOR('',#8440,1.); +#8440 = DIRECTION('',(0.,0.,1.)); +#8441 = ORIENTED_EDGE('',*,*,#8442,.T.); +#8442 = EDGE_CURVE('',#8435,#8443,#8445,.T.); +#8443 = VERTEX_POINT('',#8444); +#8444 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#8445 = LINE('',#8446,#8447); +#8446 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#8447 = VECTOR('',#8448,1.); +#8448 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8449 = ORIENTED_EDGE('',*,*,#8450,.T.); +#8450 = EDGE_CURVE('',#8443,#7790,#8451,.T.); +#8451 = LINE('',#8452,#8453); +#8452 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#8453 = VECTOR('',#8454,1.); +#8454 = DIRECTION('',(-0.,0.,-1.)); +#8455 = PLANE('',#8456); +#8456 = AXIS2_PLACEMENT_3D('',#8457,#8458,#8459); +#8457 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#8458 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8459 = DIRECTION('',(0.,0.,1.)); +#8460 = ADVANCED_FACE('',(#8461),#8479,.F.); +#8461 = FACE_BOUND('',#8462,.F.); +#8462 = EDGE_LOOP('',(#8463,#8471,#8472,#8473)); +#8463 = ORIENTED_EDGE('',*,*,#8464,.F.); +#8464 = EDGE_CURVE('',#7808,#8465,#8467,.T.); +#8465 = VERTEX_POINT('',#8466); +#8466 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#8467 = LINE('',#8468,#8469); +#8468 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8469 = VECTOR('',#8470,1.); +#8470 = DIRECTION('',(0.,0.,1.)); +#8471 = ORIENTED_EDGE('',*,*,#7815,.T.); +#8472 = ORIENTED_EDGE('',*,*,#8434,.T.); +#8473 = ORIENTED_EDGE('',*,*,#8474,.F.); +#8474 = EDGE_CURVE('',#8465,#8435,#8475,.T.); +#8475 = LINE('',#8476,#8477); +#8476 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#8477 = VECTOR('',#8478,1.); +#8478 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8479 = PLANE('',#8480); +#8480 = AXIS2_PLACEMENT_3D('',#8481,#8482,#8483); +#8481 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8482 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8483 = DIRECTION('',(0.,-0.,1.)); +#8484 = ADVANCED_FACE('',(#8485),#8503,.F.); +#8485 = FACE_BOUND('',#8486,.F.); +#8486 = EDGE_LOOP('',(#8487,#8488,#8489,#8497)); +#8487 = ORIENTED_EDGE('',*,*,#7807,.T.); +#8488 = ORIENTED_EDGE('',*,*,#8464,.T.); +#8489 = ORIENTED_EDGE('',*,*,#8490,.T.); +#8490 = EDGE_CURVE('',#8465,#8491,#8493,.T.); +#8491 = VERTEX_POINT('',#8492); +#8492 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#8493 = LINE('',#8494,#8495); +#8494 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#8495 = VECTOR('',#8496,1.); +#8496 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8497 = ORIENTED_EDGE('',*,*,#8498,.T.); +#8498 = EDGE_CURVE('',#8491,#7800,#8499,.T.); +#8499 = LINE('',#8500,#8501); +#8500 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8501 = VECTOR('',#8502,1.); +#8502 = DIRECTION('',(-0.,0.,-1.)); +#8503 = PLANE('',#8504); +#8504 = AXIS2_PLACEMENT_3D('',#8505,#8506,#8507); +#8505 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#8506 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8507 = DIRECTION('',(0.,0.,1.)); +#8508 = ADVANCED_FACE('',(#8509),#8520,.F.); +#8509 = FACE_BOUND('',#8510,.F.); +#8510 = EDGE_LOOP('',(#8511,#8512,#8518,#8519)); +#8511 = ORIENTED_EDGE('',*,*,#8498,.F.); +#8512 = ORIENTED_EDGE('',*,*,#8513,.T.); +#8513 = EDGE_CURVE('',#8491,#8443,#8514,.T.); +#8514 = LINE('',#8515,#8516); +#8515 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#8516 = VECTOR('',#8517,1.); +#8517 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8518 = ORIENTED_EDGE('',*,*,#8450,.T.); +#8519 = ORIENTED_EDGE('',*,*,#7799,.T.); +#8520 = PLANE('',#8521); +#8521 = AXIS2_PLACEMENT_3D('',#8522,#8523,#8524); +#8522 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8523 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8524 = DIRECTION('',(-0.,0.,-1.)); +#8525 = ADVANCED_FACE('',(#8526),#8551,.F.); +#8526 = FACE_BOUND('',#8527,.F.); +#8527 = EDGE_LOOP('',(#8528,#8529,#8537,#8545)); +#8528 = ORIENTED_EDGE('',*,*,#7823,.T.); +#8529 = ORIENTED_EDGE('',*,*,#8530,.T.); +#8530 = EDGE_CURVE('',#7826,#8531,#8533,.T.); +#8531 = VERTEX_POINT('',#8532); +#8532 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#8533 = LINE('',#8534,#8535); +#8534 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#8535 = VECTOR('',#8536,1.); +#8536 = DIRECTION('',(0.,0.,1.)); +#8537 = ORIENTED_EDGE('',*,*,#8538,.T.); +#8538 = EDGE_CURVE('',#8531,#8539,#8541,.T.); +#8539 = VERTEX_POINT('',#8540); +#8540 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#8541 = LINE('',#8542,#8543); +#8542 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#8543 = VECTOR('',#8544,1.); +#8544 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8545 = ORIENTED_EDGE('',*,*,#8546,.T.); +#8546 = EDGE_CURVE('',#8539,#7824,#8547,.T.); +#8547 = LINE('',#8548,#8549); +#8548 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#8549 = VECTOR('',#8550,1.); +#8550 = DIRECTION('',(-0.,0.,-1.)); +#8551 = PLANE('',#8552); +#8552 = AXIS2_PLACEMENT_3D('',#8553,#8554,#8555); +#8553 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#8554 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8555 = DIRECTION('',(0.,0.,1.)); +#8556 = ADVANCED_FACE('',(#8557),#8575,.F.); +#8557 = FACE_BOUND('',#8558,.F.); +#8558 = EDGE_LOOP('',(#8559,#8560,#8568,#8574)); +#8559 = ORIENTED_EDGE('',*,*,#8546,.F.); +#8560 = ORIENTED_EDGE('',*,*,#8561,.T.); +#8561 = EDGE_CURVE('',#8539,#8562,#8564,.T.); +#8562 = VERTEX_POINT('',#8563); +#8563 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#8564 = LINE('',#8565,#8566); +#8565 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#8566 = VECTOR('',#8567,1.); +#8567 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8568 = ORIENTED_EDGE('',*,*,#8569,.T.); +#8569 = EDGE_CURVE('',#8562,#7842,#8570,.T.); +#8570 = LINE('',#8571,#8572); +#8571 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#8572 = VECTOR('',#8573,1.); +#8573 = DIRECTION('',(-0.,0.,-1.)); +#8574 = ORIENTED_EDGE('',*,*,#7849,.T.); +#8575 = PLANE('',#8576); +#8576 = AXIS2_PLACEMENT_3D('',#8577,#8578,#8579); +#8577 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#8578 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8579 = DIRECTION('',(-0.,0.,-1.)); +#8580 = ADVANCED_FACE('',(#8581),#8599,.T.); +#8581 = FACE_BOUND('',#8582,.T.); +#8582 = EDGE_LOOP('',(#8583,#8584,#8592,#8598)); +#8583 = ORIENTED_EDGE('',*,*,#7841,.T.); +#8584 = ORIENTED_EDGE('',*,*,#8585,.T.); +#8585 = EDGE_CURVE('',#7834,#8586,#8588,.T.); +#8586 = VERTEX_POINT('',#8587); +#8587 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#8588 = LINE('',#8589,#8590); +#8589 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#8590 = VECTOR('',#8591,1.); +#8591 = DIRECTION('',(0.,0.,1.)); +#8592 = ORIENTED_EDGE('',*,*,#8593,.T.); +#8593 = EDGE_CURVE('',#8586,#8562,#8594,.T.); +#8594 = LINE('',#8595,#8596); +#8595 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#8596 = VECTOR('',#8597,1.); +#8597 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8598 = ORIENTED_EDGE('',*,*,#8569,.T.); +#8599 = PLANE('',#8600); +#8600 = AXIS2_PLACEMENT_3D('',#8601,#8602,#8603); +#8601 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#8602 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8603 = DIRECTION('',(0.,0.,1.)); +#8604 = ADVANCED_FACE('',(#8605),#8616,.F.); +#8605 = FACE_BOUND('',#8606,.F.); +#8606 = EDGE_LOOP('',(#8607,#8608,#8609,#8610)); +#8607 = ORIENTED_EDGE('',*,*,#8530,.F.); +#8608 = ORIENTED_EDGE('',*,*,#7833,.T.); +#8609 = ORIENTED_EDGE('',*,*,#8585,.T.); +#8610 = ORIENTED_EDGE('',*,*,#8611,.F.); +#8611 = EDGE_CURVE('',#8531,#8586,#8612,.T.); +#8612 = LINE('',#8613,#8614); +#8613 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#8614 = VECTOR('',#8615,1.); +#8615 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8616 = PLANE('',#8617); +#8617 = AXIS2_PLACEMENT_3D('',#8618,#8619,#8620); +#8618 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#8619 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8620 = DIRECTION('',(0.,-0.,1.)); +#8621 = ADVANCED_FACE('',(#8622),#8647,.T.); +#8622 = FACE_BOUND('',#8623,.T.); +#8623 = EDGE_LOOP('',(#8624,#8625,#8633,#8641)); +#8624 = ORIENTED_EDGE('',*,*,#7857,.T.); +#8625 = ORIENTED_EDGE('',*,*,#8626,.T.); +#8626 = EDGE_CURVE('',#7860,#8627,#8629,.T.); +#8627 = VERTEX_POINT('',#8628); +#8628 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#8629 = LINE('',#8630,#8631); +#8630 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#8631 = VECTOR('',#8632,1.); +#8632 = DIRECTION('',(0.,0.,1.)); +#8633 = ORIENTED_EDGE('',*,*,#8634,.T.); +#8634 = EDGE_CURVE('',#8627,#8635,#8637,.T.); +#8635 = VERTEX_POINT('',#8636); +#8636 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#8637 = LINE('',#8638,#8639); +#8638 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#8639 = VECTOR('',#8640,1.); +#8640 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8641 = ORIENTED_EDGE('',*,*,#8642,.T.); +#8642 = EDGE_CURVE('',#8635,#7858,#8643,.T.); +#8643 = LINE('',#8644,#8645); +#8644 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#8645 = VECTOR('',#8646,1.); +#8646 = DIRECTION('',(-0.,0.,-1.)); +#8647 = PLANE('',#8648); +#8648 = AXIS2_PLACEMENT_3D('',#8649,#8650,#8651); +#8649 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#8650 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8651 = DIRECTION('',(0.,0.,1.)); +#8652 = ADVANCED_FACE('',(#8653),#8671,.F.); +#8653 = FACE_BOUND('',#8654,.F.); +#8654 = EDGE_LOOP('',(#8655,#8663,#8664,#8665)); +#8655 = ORIENTED_EDGE('',*,*,#8656,.F.); +#8656 = EDGE_CURVE('',#7876,#8657,#8659,.T.); +#8657 = VERTEX_POINT('',#8658); +#8658 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#8659 = LINE('',#8660,#8661); +#8660 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#8661 = VECTOR('',#8662,1.); +#8662 = DIRECTION('',(0.,0.,1.)); +#8663 = ORIENTED_EDGE('',*,*,#7883,.T.); +#8664 = ORIENTED_EDGE('',*,*,#8626,.T.); +#8665 = ORIENTED_EDGE('',*,*,#8666,.F.); +#8666 = EDGE_CURVE('',#8657,#8627,#8667,.T.); +#8667 = LINE('',#8668,#8669); +#8668 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#8669 = VECTOR('',#8670,1.); +#8670 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8671 = PLANE('',#8672); +#8672 = AXIS2_PLACEMENT_3D('',#8673,#8674,#8675); +#8673 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#8674 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8675 = DIRECTION('',(0.,-0.,1.)); +#8676 = ADVANCED_FACE('',(#8677),#8695,.F.); +#8677 = FACE_BOUND('',#8678,.F.); +#8678 = EDGE_LOOP('',(#8679,#8680,#8681,#8689)); +#8679 = ORIENTED_EDGE('',*,*,#7875,.T.); +#8680 = ORIENTED_EDGE('',*,*,#8656,.T.); +#8681 = ORIENTED_EDGE('',*,*,#8682,.T.); +#8682 = EDGE_CURVE('',#8657,#8683,#8685,.T.); +#8683 = VERTEX_POINT('',#8684); +#8684 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#8685 = LINE('',#8686,#8687); +#8686 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#8687 = VECTOR('',#8688,1.); +#8688 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8689 = ORIENTED_EDGE('',*,*,#8690,.T.); +#8690 = EDGE_CURVE('',#8683,#7868,#8691,.T.); +#8691 = LINE('',#8692,#8693); +#8692 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#8693 = VECTOR('',#8694,1.); +#8694 = DIRECTION('',(-0.,0.,-1.)); +#8695 = PLANE('',#8696); +#8696 = AXIS2_PLACEMENT_3D('',#8697,#8698,#8699); +#8697 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#8698 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8699 = DIRECTION('',(0.,0.,1.)); +#8700 = ADVANCED_FACE('',(#8701),#8712,.F.); +#8701 = FACE_BOUND('',#8702,.F.); +#8702 = EDGE_LOOP('',(#8703,#8704,#8710,#8711)); +#8703 = ORIENTED_EDGE('',*,*,#8690,.F.); +#8704 = ORIENTED_EDGE('',*,*,#8705,.T.); +#8705 = EDGE_CURVE('',#8683,#8635,#8706,.T.); +#8706 = LINE('',#8707,#8708); +#8707 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#8708 = VECTOR('',#8709,1.); +#8709 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8710 = ORIENTED_EDGE('',*,*,#8642,.T.); +#8711 = ORIENTED_EDGE('',*,*,#7867,.T.); +#8712 = PLANE('',#8713); +#8713 = AXIS2_PLACEMENT_3D('',#8714,#8715,#8716); +#8714 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#8715 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8716 = DIRECTION('',(-0.,0.,-1.)); +#8717 = ADVANCED_FACE('',(#8718),#8743,.F.); +#8718 = FACE_BOUND('',#8719,.F.); +#8719 = EDGE_LOOP('',(#8720,#8728,#8736,#8742)); +#8720 = ORIENTED_EDGE('',*,*,#8721,.F.); +#8721 = EDGE_CURVE('',#8722,#7894,#8724,.T.); +#8722 = VERTEX_POINT('',#8723); +#8723 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#8724 = LINE('',#8725,#8726); +#8725 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#8726 = VECTOR('',#8727,1.); +#8727 = DIRECTION('',(-0.,0.,-1.)); +#8728 = ORIENTED_EDGE('',*,*,#8729,.T.); +#8729 = EDGE_CURVE('',#8722,#8730,#8732,.T.); +#8730 = VERTEX_POINT('',#8731); +#8731 = CARTESIAN_POINT('',(7.18,0.32,6.3)); +#8732 = LINE('',#8733,#8734); +#8733 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#8734 = VECTOR('',#8735,1.); +#8735 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8736 = ORIENTED_EDGE('',*,*,#8737,.T.); +#8737 = EDGE_CURVE('',#8730,#7892,#8738,.T.); +#8738 = LINE('',#8739,#8740); +#8739 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#8740 = VECTOR('',#8741,1.); +#8741 = DIRECTION('',(-0.,0.,-1.)); +#8742 = ORIENTED_EDGE('',*,*,#7891,.T.); +#8743 = PLANE('',#8744); +#8744 = AXIS2_PLACEMENT_3D('',#8745,#8746,#8747); +#8745 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#8746 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8747 = DIRECTION('',(-0.,0.,-1.)); +#8748 = ADVANCED_FACE('',(#8749),#8767,.T.); +#8749 = FACE_BOUND('',#8750,.T.); +#8750 = EDGE_LOOP('',(#8751,#8752,#8760,#8766)); +#8751 = ORIENTED_EDGE('',*,*,#7917,.T.); +#8752 = ORIENTED_EDGE('',*,*,#8753,.T.); +#8753 = EDGE_CURVE('',#7910,#8754,#8756,.T.); +#8754 = VERTEX_POINT('',#8755); +#8755 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#8756 = LINE('',#8757,#8758); +#8757 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#8758 = VECTOR('',#8759,1.); +#8759 = DIRECTION('',(0.,0.,1.)); +#8760 = ORIENTED_EDGE('',*,*,#8761,.T.); +#8761 = EDGE_CURVE('',#8754,#8730,#8762,.T.); +#8762 = LINE('',#8763,#8764); +#8763 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#8764 = VECTOR('',#8765,1.); +#8765 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8766 = ORIENTED_EDGE('',*,*,#8737,.T.); +#8767 = PLANE('',#8768); +#8768 = AXIS2_PLACEMENT_3D('',#8769,#8770,#8771); +#8769 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#8770 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8771 = DIRECTION('',(0.,0.,1.)); +#8772 = ADVANCED_FACE('',(#8773),#8791,.F.); +#8773 = FACE_BOUND('',#8774,.F.); +#8774 = EDGE_LOOP('',(#8775,#8783,#8784,#8785)); +#8775 = ORIENTED_EDGE('',*,*,#8776,.F.); +#8776 = EDGE_CURVE('',#7902,#8777,#8779,.T.); +#8777 = VERTEX_POINT('',#8778); +#8778 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#8779 = LINE('',#8780,#8781); +#8780 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#8781 = VECTOR('',#8782,1.); +#8782 = DIRECTION('',(0.,0.,1.)); +#8783 = ORIENTED_EDGE('',*,*,#7909,.T.); +#8784 = ORIENTED_EDGE('',*,*,#8753,.T.); +#8785 = ORIENTED_EDGE('',*,*,#8786,.F.); +#8786 = EDGE_CURVE('',#8777,#8754,#8787,.T.); +#8787 = LINE('',#8788,#8789); +#8788 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#8789 = VECTOR('',#8790,1.); +#8790 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8791 = PLANE('',#8792); +#8792 = AXIS2_PLACEMENT_3D('',#8793,#8794,#8795); +#8793 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#8794 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8795 = DIRECTION('',(0.,-0.,1.)); +#8796 = ADVANCED_FACE('',(#8797),#8808,.F.); +#8797 = FACE_BOUND('',#8798,.F.); +#8798 = EDGE_LOOP('',(#8799,#8800,#8801,#8807)); +#8799 = ORIENTED_EDGE('',*,*,#7901,.T.); +#8800 = ORIENTED_EDGE('',*,*,#8776,.T.); +#8801 = ORIENTED_EDGE('',*,*,#8802,.T.); +#8802 = EDGE_CURVE('',#8777,#8722,#8803,.T.); +#8803 = LINE('',#8804,#8805); +#8804 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#8805 = VECTOR('',#8806,1.); +#8806 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8807 = ORIENTED_EDGE('',*,*,#8721,.T.); +#8808 = PLANE('',#8809); +#8809 = AXIS2_PLACEMENT_3D('',#8810,#8811,#8812); +#8810 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#8811 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8812 = DIRECTION('',(0.,0.,1.)); +#8813 = ADVANCED_FACE('',(#8814),#8871,.T.); +#8814 = FACE_BOUND('',#8815,.T.); +#8815 = EDGE_LOOP('',(#8816,#8826,#8834,#8842,#8848,#8849,#8857,#8865)); +#8816 = ORIENTED_EDGE('',*,*,#8817,.T.); +#8817 = EDGE_CURVE('',#8818,#8820,#8822,.T.); +#8818 = VERTEX_POINT('',#8819); +#8819 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#8820 = VERTEX_POINT('',#8821); +#8821 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#8822 = LINE('',#8823,#8824); +#8823 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#8824 = VECTOR('',#8825,1.); +#8825 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8826 = ORIENTED_EDGE('',*,*,#8827,.T.); +#8827 = EDGE_CURVE('',#8820,#8828,#8830,.T.); +#8828 = VERTEX_POINT('',#8829); +#8829 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#8830 = LINE('',#8831,#8832); +#8831 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#8832 = VECTOR('',#8833,1.); +#8833 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#8834 = ORIENTED_EDGE('',*,*,#8835,.T.); +#8835 = EDGE_CURVE('',#8828,#8836,#8838,.T.); +#8836 = VERTEX_POINT('',#8837); +#8837 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#8838 = LINE('',#8839,#8840); +#8839 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#8840 = VECTOR('',#8841,1.); +#8841 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#8842 = ORIENTED_EDGE('',*,*,#8843,.T.); +#8843 = EDGE_CURVE('',#8836,#8258,#8844,.T.); +#8844 = LINE('',#8845,#8846); +#8845 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#8846 = VECTOR('',#8847,1.); +#8847 = DIRECTION('',(0.,0.,1.)); +#8848 = ORIENTED_EDGE('',*,*,#8255,.F.); +#8849 = ORIENTED_EDGE('',*,*,#8850,.T.); +#8850 = EDGE_CURVE('',#8256,#8851,#8853,.T.); +#8851 = VERTEX_POINT('',#8852); +#8852 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#8853 = LINE('',#8854,#8855); +#8854 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#8855 = VECTOR('',#8856,1.); +#8856 = DIRECTION('',(-0.,0.,-1.)); +#8857 = ORIENTED_EDGE('',*,*,#8858,.T.); +#8858 = EDGE_CURVE('',#8851,#8859,#8861,.T.); +#8859 = VERTEX_POINT('',#8860); +#8860 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#8861 = LINE('',#8862,#8863); +#8862 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#8863 = VECTOR('',#8864,1.); +#8864 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#8865 = ORIENTED_EDGE('',*,*,#8866,.T.); +#8866 = EDGE_CURVE('',#8859,#8818,#8867,.T.); +#8867 = LINE('',#8868,#8869); +#8868 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#8869 = VECTOR('',#8870,1.); +#8870 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#8871 = PLANE('',#8872); +#8872 = AXIS2_PLACEMENT_3D('',#8873,#8874,#8875); +#8873 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#8874 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8875 = DIRECTION('',(0.,0.,1.)); +#8876 = ADVANCED_FACE('',(#8877),#8895,.F.); +#8877 = FACE_BOUND('',#8878,.F.); +#8878 = EDGE_LOOP('',(#8879,#8887,#8893,#8894)); +#8879 = ORIENTED_EDGE('',*,*,#8880,.F.); +#8880 = EDGE_CURVE('',#8881,#8274,#8883,.T.); +#8881 = VERTEX_POINT('',#8882); +#8882 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8883 = LINE('',#8884,#8885); +#8884 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8885 = VECTOR('',#8886,1.); +#8886 = DIRECTION('',(0.,0.,1.)); +#8887 = ORIENTED_EDGE('',*,*,#8888,.T.); +#8888 = EDGE_CURVE('',#8881,#8836,#8889,.T.); +#8889 = LINE('',#8890,#8891); +#8890 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8891 = VECTOR('',#8892,1.); +#8892 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8893 = ORIENTED_EDGE('',*,*,#8843,.T.); +#8894 = ORIENTED_EDGE('',*,*,#8281,.F.); +#8895 = PLANE('',#8896); +#8896 = AXIS2_PLACEMENT_3D('',#8897,#8898,#8899); +#8897 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8898 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8899 = DIRECTION('',(0.,-0.,1.)); +#8900 = ADVANCED_FACE('',(#8901),#8951,.F.); +#8901 = FACE_BOUND('',#8902,.F.); +#8902 = EDGE_LOOP('',(#8903,#8913,#8921,#8927,#8928,#8929,#8937,#8945)); +#8903 = ORIENTED_EDGE('',*,*,#8904,.T.); +#8904 = EDGE_CURVE('',#8905,#8907,#8909,.T.); +#8905 = VERTEX_POINT('',#8906); +#8906 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#8907 = VERTEX_POINT('',#8908); +#8908 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#8909 = LINE('',#8910,#8911); +#8910 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#8911 = VECTOR('',#8912,1.); +#8912 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8913 = ORIENTED_EDGE('',*,*,#8914,.T.); +#8914 = EDGE_CURVE('',#8907,#8915,#8917,.T.); +#8915 = VERTEX_POINT('',#8916); +#8916 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#8917 = LINE('',#8918,#8919); +#8918 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#8919 = VECTOR('',#8920,1.); +#8920 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#8921 = ORIENTED_EDGE('',*,*,#8922,.T.); +#8922 = EDGE_CURVE('',#8915,#8881,#8923,.T.); +#8923 = LINE('',#8924,#8925); +#8924 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#8925 = VECTOR('',#8926,1.); +#8926 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#8927 = ORIENTED_EDGE('',*,*,#8880,.T.); +#8928 = ORIENTED_EDGE('',*,*,#8273,.F.); +#8929 = ORIENTED_EDGE('',*,*,#8930,.T.); +#8930 = EDGE_CURVE('',#8266,#8931,#8933,.T.); +#8931 = VERTEX_POINT('',#8932); +#8932 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#8933 = LINE('',#8934,#8935); +#8934 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8935 = VECTOR('',#8936,1.); +#8936 = DIRECTION('',(-0.,0.,-1.)); +#8937 = ORIENTED_EDGE('',*,*,#8938,.T.); +#8938 = EDGE_CURVE('',#8931,#8939,#8941,.T.); +#8939 = VERTEX_POINT('',#8940); +#8940 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#8941 = LINE('',#8942,#8943); +#8942 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#8943 = VECTOR('',#8944,1.); +#8944 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#8945 = ORIENTED_EDGE('',*,*,#8946,.T.); +#8946 = EDGE_CURVE('',#8939,#8905,#8947,.T.); +#8947 = LINE('',#8948,#8949); +#8948 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#8949 = VECTOR('',#8950,1.); +#8950 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#8951 = PLANE('',#8952); +#8952 = AXIS2_PLACEMENT_3D('',#8953,#8954,#8955); +#8953 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#8954 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8955 = DIRECTION('',(0.,0.,1.)); +#8956 = ADVANCED_FACE('',(#8957),#8968,.F.); +#8957 = FACE_BOUND('',#8958,.F.); +#8958 = EDGE_LOOP('',(#8959,#8960,#8961,#8962)); +#8959 = ORIENTED_EDGE('',*,*,#8930,.F.); +#8960 = ORIENTED_EDGE('',*,*,#8265,.F.); +#8961 = ORIENTED_EDGE('',*,*,#8850,.T.); +#8962 = ORIENTED_EDGE('',*,*,#8963,.F.); +#8963 = EDGE_CURVE('',#8931,#8851,#8964,.T.); +#8964 = LINE('',#8965,#8966); +#8965 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#8966 = VECTOR('',#8967,1.); +#8967 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8968 = PLANE('',#8969); +#8969 = AXIS2_PLACEMENT_3D('',#8970,#8971,#8972); +#8970 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8971 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8972 = DIRECTION('',(-0.,0.,-1.)); +#8973 = ADVANCED_FACE('',(#8974),#8999,.F.); +#8974 = FACE_BOUND('',#8975,.F.); +#8975 = EDGE_LOOP('',(#8976,#8986,#8992,#8993)); +#8976 = ORIENTED_EDGE('',*,*,#8977,.T.); +#8977 = EDGE_CURVE('',#8978,#8980,#8982,.T.); +#8978 = VERTEX_POINT('',#8979); +#8979 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#8980 = VERTEX_POINT('',#8981); +#8981 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#8982 = LINE('',#8983,#8984); +#8983 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#8984 = VECTOR('',#8985,1.); +#8985 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8986 = ORIENTED_EDGE('',*,*,#8987,.T.); +#8987 = EDGE_CURVE('',#8980,#8304,#8988,.T.); +#8988 = LINE('',#8989,#8990); +#8989 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#8990 = VECTOR('',#8991,1.); +#8991 = DIRECTION('',(0.,0.,1.)); +#8992 = ORIENTED_EDGE('',*,*,#8301,.F.); +#8993 = ORIENTED_EDGE('',*,*,#8994,.T.); +#8994 = EDGE_CURVE('',#8302,#8978,#8995,.T.); +#8995 = LINE('',#8996,#8997); +#8996 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#8997 = VECTOR('',#8998,1.); +#8998 = DIRECTION('',(-0.,0.,-1.)); +#8999 = PLANE('',#9000); +#9000 = AXIS2_PLACEMENT_3D('',#9001,#9002,#9003); +#9001 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#9002 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9003 = DIRECTION('',(0.,0.,1.)); +#9004 = ADVANCED_FACE('',(#9005),#9023,.F.); +#9005 = FACE_BOUND('',#9006,.F.); +#9006 = EDGE_LOOP('',(#9007,#9008,#9009,#9017)); +#9007 = ORIENTED_EDGE('',*,*,#8994,.F.); +#9008 = ORIENTED_EDGE('',*,*,#8327,.F.); +#9009 = ORIENTED_EDGE('',*,*,#9010,.T.); +#9010 = EDGE_CURVE('',#8320,#9011,#9013,.T.); +#9011 = VERTEX_POINT('',#9012); +#9012 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#9013 = LINE('',#9014,#9015); +#9014 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#9015 = VECTOR('',#9016,1.); +#9016 = DIRECTION('',(-0.,0.,-1.)); +#9017 = ORIENTED_EDGE('',*,*,#9018,.F.); +#9018 = EDGE_CURVE('',#8978,#9011,#9019,.T.); +#9019 = LINE('',#9020,#9021); +#9020 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#9021 = VECTOR('',#9022,1.); +#9022 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9023 = PLANE('',#9024); +#9024 = AXIS2_PLACEMENT_3D('',#9025,#9026,#9027); +#9025 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#9026 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9027 = DIRECTION('',(-0.,0.,-1.)); +#9028 = ADVANCED_FACE('',(#9029),#9047,.T.); +#9029 = FACE_BOUND('',#9030,.T.); +#9030 = EDGE_LOOP('',(#9031,#9039,#9045,#9046)); +#9031 = ORIENTED_EDGE('',*,*,#9032,.T.); +#9032 = EDGE_CURVE('',#9011,#9033,#9035,.T.); +#9033 = VERTEX_POINT('',#9034); +#9034 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#9035 = LINE('',#9036,#9037); +#9036 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#9037 = VECTOR('',#9038,1.); +#9038 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9039 = ORIENTED_EDGE('',*,*,#9040,.T.); +#9040 = EDGE_CURVE('',#9033,#8312,#9041,.T.); +#9041 = LINE('',#9042,#9043); +#9042 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#9043 = VECTOR('',#9044,1.); +#9044 = DIRECTION('',(0.,0.,1.)); +#9045 = ORIENTED_EDGE('',*,*,#8319,.F.); +#9046 = ORIENTED_EDGE('',*,*,#9010,.T.); +#9047 = PLANE('',#9048); +#9048 = AXIS2_PLACEMENT_3D('',#9049,#9050,#9051); +#9049 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#9050 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9051 = DIRECTION('',(0.,0.,1.)); +#9052 = ADVANCED_FACE('',(#9053),#9064,.F.); +#9053 = FACE_BOUND('',#9054,.F.); +#9054 = EDGE_LOOP('',(#9055,#9056,#9062,#9063)); +#9055 = ORIENTED_EDGE('',*,*,#8987,.F.); +#9056 = ORIENTED_EDGE('',*,*,#9057,.T.); +#9057 = EDGE_CURVE('',#8980,#9033,#9058,.T.); +#9058 = LINE('',#9059,#9060); +#9059 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#9060 = VECTOR('',#9061,1.); +#9061 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9062 = ORIENTED_EDGE('',*,*,#9040,.T.); +#9063 = ORIENTED_EDGE('',*,*,#8311,.F.); +#9064 = PLANE('',#9065); +#9065 = AXIS2_PLACEMENT_3D('',#9066,#9067,#9068); +#9066 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#9067 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9068 = DIRECTION('',(0.,-0.,1.)); +#9069 = ADVANCED_FACE('',(#9070),#9095,.T.); +#9070 = FACE_BOUND('',#9071,.T.); +#9071 = EDGE_LOOP('',(#9072,#9082,#9088,#9089)); +#9072 = ORIENTED_EDGE('',*,*,#9073,.T.); +#9073 = EDGE_CURVE('',#9074,#9076,#9078,.T.); +#9074 = VERTEX_POINT('',#9075); +#9075 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#9076 = VERTEX_POINT('',#9077); +#9077 = CARTESIAN_POINT('',(4.68,-0.32,-3.2)); +#9078 = LINE('',#9079,#9080); +#9079 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#9080 = VECTOR('',#9081,1.); +#9081 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9082 = ORIENTED_EDGE('',*,*,#9083,.T.); +#9083 = EDGE_CURVE('',#9076,#8350,#9084,.T.); +#9084 = LINE('',#9085,#9086); +#9085 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#9086 = VECTOR('',#9087,1.); +#9087 = DIRECTION('',(0.,0.,1.)); +#9088 = ORIENTED_EDGE('',*,*,#8347,.F.); +#9089 = ORIENTED_EDGE('',*,*,#9090,.T.); +#9090 = EDGE_CURVE('',#8348,#9074,#9091,.T.); +#9091 = LINE('',#9092,#9093); +#9092 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#9093 = VECTOR('',#9094,1.); +#9094 = DIRECTION('',(-0.,0.,-1.)); +#9095 = PLANE('',#9096); +#9096 = AXIS2_PLACEMENT_3D('',#9097,#9098,#9099); +#9097 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#9098 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9099 = DIRECTION('',(0.,0.,1.)); +#9100 = ADVANCED_FACE('',(#9101),#9119,.F.); +#9101 = FACE_BOUND('',#9102,.F.); +#9102 = EDGE_LOOP('',(#9103,#9111,#9117,#9118)); +#9103 = ORIENTED_EDGE('',*,*,#9104,.F.); +#9104 = EDGE_CURVE('',#9105,#8366,#9107,.T.); +#9105 = VERTEX_POINT('',#9106); +#9106 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#9107 = LINE('',#9108,#9109); +#9108 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#9109 = VECTOR('',#9110,1.); +#9110 = DIRECTION('',(0.,0.,1.)); +#9111 = ORIENTED_EDGE('',*,*,#9112,.T.); +#9112 = EDGE_CURVE('',#9105,#9076,#9113,.T.); +#9113 = LINE('',#9114,#9115); +#9114 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#9115 = VECTOR('',#9116,1.); +#9116 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9117 = ORIENTED_EDGE('',*,*,#9083,.T.); +#9118 = ORIENTED_EDGE('',*,*,#8373,.F.); +#9119 = PLANE('',#9120); +#9120 = AXIS2_PLACEMENT_3D('',#9121,#9122,#9123); +#9121 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#9122 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9123 = DIRECTION('',(0.,-0.,1.)); +#9124 = ADVANCED_FACE('',(#9125),#9143,.F.); +#9125 = FACE_BOUND('',#9126,.F.); +#9126 = EDGE_LOOP('',(#9127,#9135,#9136,#9137)); +#9127 = ORIENTED_EDGE('',*,*,#9128,.T.); +#9128 = EDGE_CURVE('',#9129,#9105,#9131,.T.); +#9129 = VERTEX_POINT('',#9130); +#9130 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#9131 = LINE('',#9132,#9133); +#9132 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#9133 = VECTOR('',#9134,1.); +#9134 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9135 = ORIENTED_EDGE('',*,*,#9104,.T.); +#9136 = ORIENTED_EDGE('',*,*,#8365,.F.); +#9137 = ORIENTED_EDGE('',*,*,#9138,.T.); +#9138 = EDGE_CURVE('',#8358,#9129,#9139,.T.); +#9139 = LINE('',#9140,#9141); +#9140 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#9141 = VECTOR('',#9142,1.); +#9142 = DIRECTION('',(-0.,0.,-1.)); +#9143 = PLANE('',#9144); +#9144 = AXIS2_PLACEMENT_3D('',#9145,#9146,#9147); +#9145 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#9146 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9147 = DIRECTION('',(0.,0.,1.)); +#9148 = ADVANCED_FACE('',(#9149),#9160,.F.); +#9149 = FACE_BOUND('',#9150,.F.); +#9150 = EDGE_LOOP('',(#9151,#9152,#9153,#9154)); +#9151 = ORIENTED_EDGE('',*,*,#9138,.F.); +#9152 = ORIENTED_EDGE('',*,*,#8357,.F.); +#9153 = ORIENTED_EDGE('',*,*,#9090,.T.); +#9154 = ORIENTED_EDGE('',*,*,#9155,.F.); +#9155 = EDGE_CURVE('',#9129,#9074,#9156,.T.); +#9156 = LINE('',#9157,#9158); +#9157 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#9158 = VECTOR('',#9159,1.); +#9159 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9160 = PLANE('',#9161); +#9161 = AXIS2_PLACEMENT_3D('',#9162,#9163,#9164); +#9162 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#9163 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9164 = DIRECTION('',(-0.,0.,-1.)); +#9165 = ADVANCED_FACE('',(#9166),#9191,.F.); +#9166 = FACE_BOUND('',#9167,.F.); +#9167 = EDGE_LOOP('',(#9168,#9176,#9177,#9185)); +#9168 = ORIENTED_EDGE('',*,*,#9169,.F.); +#9169 = EDGE_CURVE('',#8396,#9170,#9172,.T.); +#9170 = VERTEX_POINT('',#9171); +#9171 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#9172 = LINE('',#9173,#9174); +#9173 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#9174 = VECTOR('',#9175,1.); +#9175 = DIRECTION('',(-0.,0.,-1.)); +#9176 = ORIENTED_EDGE('',*,*,#8393,.F.); +#9177 = ORIENTED_EDGE('',*,*,#9178,.T.); +#9178 = EDGE_CURVE('',#8394,#9179,#9181,.T.); +#9179 = VERTEX_POINT('',#9180); +#9180 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#9181 = LINE('',#9182,#9183); +#9182 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#9183 = VECTOR('',#9184,1.); +#9184 = DIRECTION('',(-0.,0.,-1.)); +#9185 = ORIENTED_EDGE('',*,*,#9186,.F.); +#9186 = EDGE_CURVE('',#9170,#9179,#9187,.T.); +#9187 = LINE('',#9188,#9189); +#9188 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#9189 = VECTOR('',#9190,1.); +#9190 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9191 = PLANE('',#9192); +#9192 = AXIS2_PLACEMENT_3D('',#9193,#9194,#9195); +#9193 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#9194 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9195 = DIRECTION('',(-0.,0.,-1.)); +#9196 = ADVANCED_FACE('',(#9197),#9247,.T.); +#9197 = FACE_BOUND('',#9198,.T.); +#9198 = EDGE_LOOP('',(#9199,#9209,#9217,#9225,#9231,#9232,#9233,#9241)); +#9199 = ORIENTED_EDGE('',*,*,#9200,.T.); +#9200 = EDGE_CURVE('',#9201,#9203,#9205,.T.); +#9201 = VERTEX_POINT('',#9202); +#9202 = CARTESIAN_POINT('',(7.18,0.351578947368,-3.2)); +#9203 = VERTEX_POINT('',#9204); +#9204 = CARTESIAN_POINT('',(7.18,-0.288421052632,-3.2)); +#9205 = LINE('',#9206,#9207); +#9206 = CARTESIAN_POINT('',(7.18,0.32,-3.2)); +#9207 = VECTOR('',#9208,1.); +#9208 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9209 = ORIENTED_EDGE('',*,*,#9210,.T.); +#9210 = EDGE_CURVE('',#9203,#9211,#9213,.T.); +#9211 = VERTEX_POINT('',#9212); +#9212 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#9213 = LINE('',#9214,#9215); +#9214 = CARTESIAN_POINT('',(7.18,-0.32,-3.4)); +#9215 = VECTOR('',#9216,1.); +#9216 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#9217 = ORIENTED_EDGE('',*,*,#9218,.T.); +#9218 = EDGE_CURVE('',#9211,#9219,#9221,.T.); +#9219 = VERTEX_POINT('',#9220); +#9220 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#9221 = LINE('',#9222,#9223); +#9222 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#9223 = VECTOR('',#9224,1.); +#9224 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#9225 = ORIENTED_EDGE('',*,*,#9226,.T.); +#9226 = EDGE_CURVE('',#9219,#8412,#9227,.T.); +#9227 = LINE('',#9228,#9229); +#9228 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#9229 = VECTOR('',#9230,1.); +#9230 = DIRECTION('',(0.,0.,1.)); +#9231 = ORIENTED_EDGE('',*,*,#8419,.F.); +#9232 = ORIENTED_EDGE('',*,*,#9178,.T.); +#9233 = ORIENTED_EDGE('',*,*,#9234,.T.); +#9234 = EDGE_CURVE('',#9179,#9235,#9237,.T.); +#9235 = VERTEX_POINT('',#9236); +#9236 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#9237 = LINE('',#9238,#9239); +#9238 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#9239 = VECTOR('',#9240,1.); +#9240 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#9241 = ORIENTED_EDGE('',*,*,#9242,.T.); +#9242 = EDGE_CURVE('',#9235,#9201,#9243,.T.); +#9243 = LINE('',#9244,#9245); +#9244 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#9245 = VECTOR('',#9246,1.); +#9246 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#9247 = PLANE('',#9248); +#9248 = AXIS2_PLACEMENT_3D('',#9249,#9250,#9251); +#9249 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#9250 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9251 = DIRECTION('',(0.,0.,1.)); +#9252 = ADVANCED_FACE('',(#9253),#9271,.F.); +#9253 = FACE_BOUND('',#9254,.F.); +#9254 = EDGE_LOOP('',(#9255,#9263,#9269,#9270)); +#9255 = ORIENTED_EDGE('',*,*,#9256,.F.); +#9256 = EDGE_CURVE('',#9257,#8404,#9259,.T.); +#9257 = VERTEX_POINT('',#9258); +#9258 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9259 = LINE('',#9260,#9261); +#9260 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9261 = VECTOR('',#9262,1.); +#9262 = DIRECTION('',(0.,0.,1.)); +#9263 = ORIENTED_EDGE('',*,*,#9264,.T.); +#9264 = EDGE_CURVE('',#9257,#9219,#9265,.T.); +#9265 = LINE('',#9266,#9267); +#9266 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9267 = VECTOR('',#9268,1.); +#9268 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9269 = ORIENTED_EDGE('',*,*,#9226,.T.); +#9270 = ORIENTED_EDGE('',*,*,#8411,.F.); +#9271 = PLANE('',#9272); +#9272 = AXIS2_PLACEMENT_3D('',#9273,#9274,#9275); +#9273 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9274 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9275 = DIRECTION('',(0.,-0.,1.)); +#9276 = ADVANCED_FACE('',(#9277),#9320,.F.); +#9277 = FACE_BOUND('',#9278,.F.); +#9278 = EDGE_LOOP('',(#9279,#9289,#9297,#9303,#9304,#9305,#9306,#9314)); +#9279 = ORIENTED_EDGE('',*,*,#9280,.T.); +#9280 = EDGE_CURVE('',#9281,#9283,#9285,.T.); +#9281 = VERTEX_POINT('',#9282); +#9282 = CARTESIAN_POINT('',(7.82,0.351578947368,-3.2)); +#9283 = VERTEX_POINT('',#9284); +#9284 = CARTESIAN_POINT('',(7.82,-0.288421052632,-3.2)); +#9285 = LINE('',#9286,#9287); +#9286 = CARTESIAN_POINT('',(7.82,0.32,-3.2)); +#9287 = VECTOR('',#9288,1.); +#9288 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9289 = ORIENTED_EDGE('',*,*,#9290,.T.); +#9290 = EDGE_CURVE('',#9283,#9291,#9293,.T.); +#9291 = VERTEX_POINT('',#9292); +#9292 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#9293 = LINE('',#9294,#9295); +#9294 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#9295 = VECTOR('',#9296,1.); +#9296 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#9297 = ORIENTED_EDGE('',*,*,#9298,.T.); +#9298 = EDGE_CURVE('',#9291,#9257,#9299,.T.); +#9299 = LINE('',#9300,#9301); +#9300 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#9301 = VECTOR('',#9302,1.); +#9302 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#9303 = ORIENTED_EDGE('',*,*,#9256,.T.); +#9304 = ORIENTED_EDGE('',*,*,#8403,.F.); +#9305 = ORIENTED_EDGE('',*,*,#9169,.T.); +#9306 = ORIENTED_EDGE('',*,*,#9307,.T.); +#9307 = EDGE_CURVE('',#9170,#9308,#9310,.T.); +#9308 = VERTEX_POINT('',#9309); +#9309 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#9310 = LINE('',#9311,#9312); +#9311 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#9312 = VECTOR('',#9313,1.); +#9313 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#9314 = ORIENTED_EDGE('',*,*,#9315,.T.); +#9315 = EDGE_CURVE('',#9308,#9281,#9316,.T.); +#9316 = LINE('',#9317,#9318); +#9317 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#9318 = VECTOR('',#9319,1.); +#9319 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#9320 = PLANE('',#9321); +#9321 = AXIS2_PLACEMENT_3D('',#9322,#9323,#9324); +#9322 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#9323 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9324 = DIRECTION('',(0.,0.,1.)); +#9325 = ADVANCED_FACE('',(#9326),#9351,.F.); +#9326 = FACE_BOUND('',#9327,.T.); +#9327 = EDGE_LOOP('',(#9328,#9336,#9344,#9350)); +#9328 = ORIENTED_EDGE('',*,*,#9329,.F.); +#9329 = EDGE_CURVE('',#9330,#8435,#9332,.T.); +#9330 = VERTEX_POINT('',#9331); +#9331 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#9332 = LINE('',#9333,#9334); +#9333 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#9334 = VECTOR('',#9335,1.); +#9335 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9336 = ORIENTED_EDGE('',*,*,#9337,.T.); +#9337 = EDGE_CURVE('',#9330,#9338,#9340,.T.); +#9338 = VERTEX_POINT('',#9339); +#9339 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#9340 = LINE('',#9341,#9342); +#9341 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#9342 = VECTOR('',#9343,1.); +#9343 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9344 = ORIENTED_EDGE('',*,*,#9345,.T.); +#9345 = EDGE_CURVE('',#9338,#8443,#9346,.T.); +#9346 = LINE('',#9347,#9348); +#9347 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#9348 = VECTOR('',#9349,1.); +#9349 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9350 = ORIENTED_EDGE('',*,*,#8442,.F.); +#9351 = PLANE('',#9352); +#9352 = AXIS2_PLACEMENT_3D('',#9353,#9354,#9355); +#9353 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#9354 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9355 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9356 = ADVANCED_FACE('',(#9357),#9375,.T.); +#9357 = FACE_BOUND('',#9358,.F.); +#9358 = EDGE_LOOP('',(#9359,#9367,#9368,#9369)); +#9359 = ORIENTED_EDGE('',*,*,#9360,.F.); +#9360 = EDGE_CURVE('',#8465,#9361,#9363,.T.); +#9361 = VERTEX_POINT('',#9362); +#9362 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#9363 = LINE('',#9364,#9365); +#9364 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#9365 = VECTOR('',#9366,1.); +#9366 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9367 = ORIENTED_EDGE('',*,*,#8474,.T.); +#9368 = ORIENTED_EDGE('',*,*,#9329,.F.); +#9369 = ORIENTED_EDGE('',*,*,#9370,.F.); +#9370 = EDGE_CURVE('',#9361,#9330,#9371,.T.); +#9371 = LINE('',#9372,#9373); +#9372 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#9373 = VECTOR('',#9374,1.); +#9374 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9375 = PLANE('',#9376); +#9376 = AXIS2_PLACEMENT_3D('',#9377,#9378,#9379); +#9377 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#9378 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9379 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9380 = ADVANCED_FACE('',(#9381),#9399,.T.); +#9381 = FACE_BOUND('',#9382,.F.); +#9382 = EDGE_LOOP('',(#9383,#9384,#9392,#9398)); +#9383 = ORIENTED_EDGE('',*,*,#9360,.T.); +#9384 = ORIENTED_EDGE('',*,*,#9385,.T.); +#9385 = EDGE_CURVE('',#9361,#9386,#9388,.T.); +#9386 = VERTEX_POINT('',#9387); +#9387 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#9388 = LINE('',#9389,#9390); +#9389 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#9390 = VECTOR('',#9391,1.); +#9391 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9392 = ORIENTED_EDGE('',*,*,#9393,.T.); +#9393 = EDGE_CURVE('',#9386,#8491,#9394,.T.); +#9394 = LINE('',#9395,#9396); +#9395 = CARTESIAN_POINT('',(0.146666666667,0.146666666667,6.473333333333 + )); +#9396 = VECTOR('',#9397,1.); +#9397 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9398 = ORIENTED_EDGE('',*,*,#8490,.F.); +#9399 = PLANE('',#9400); +#9400 = AXIS2_PLACEMENT_3D('',#9401,#9402,#9403); +#9401 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#9402 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9403 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9404 = ADVANCED_FACE('',(#9405),#9416,.T.); +#9405 = FACE_BOUND('',#9406,.F.); +#9406 = EDGE_LOOP('',(#9407,#9408,#9414,#9415)); +#9407 = ORIENTED_EDGE('',*,*,#9393,.F.); +#9408 = ORIENTED_EDGE('',*,*,#9409,.T.); +#9409 = EDGE_CURVE('',#9386,#9338,#9410,.T.); +#9410 = LINE('',#9411,#9412); +#9411 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#9412 = VECTOR('',#9413,1.); +#9413 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9414 = ORIENTED_EDGE('',*,*,#9345,.T.); +#9415 = ORIENTED_EDGE('',*,*,#8513,.F.); +#9416 = PLANE('',#9417); +#9417 = AXIS2_PLACEMENT_3D('',#9418,#9419,#9420); +#9418 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#9419 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9420 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9421 = ADVANCED_FACE('',(#9422),#9447,.T.); +#9422 = FACE_BOUND('',#9423,.F.); +#9423 = EDGE_LOOP('',(#9424,#9432,#9440,#9446)); +#9424 = ORIENTED_EDGE('',*,*,#9425,.T.); +#9425 = EDGE_CURVE('',#8531,#9426,#9428,.T.); +#9426 = VERTEX_POINT('',#9427); +#9427 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#9428 = LINE('',#9429,#9430); +#9429 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#9430 = VECTOR('',#9431,1.); +#9431 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9432 = ORIENTED_EDGE('',*,*,#9433,.T.); +#9433 = EDGE_CURVE('',#9426,#9434,#9436,.T.); +#9434 = VERTEX_POINT('',#9435); +#9435 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#9436 = LINE('',#9437,#9438); +#9437 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#9438 = VECTOR('',#9439,1.); +#9439 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9440 = ORIENTED_EDGE('',*,*,#9441,.T.); +#9441 = EDGE_CURVE('',#9434,#8539,#9442,.T.); +#9442 = LINE('',#9443,#9444); +#9443 = CARTESIAN_POINT('',(2.646666666667,0.146666666667,6.473333333333 + )); +#9444 = VECTOR('',#9445,1.); +#9445 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9446 = ORIENTED_EDGE('',*,*,#8538,.F.); +#9447 = PLANE('',#9448); +#9448 = AXIS2_PLACEMENT_3D('',#9449,#9450,#9451); +#9449 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#9450 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9451 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9452 = ADVANCED_FACE('',(#9453),#9471,.T.); +#9453 = FACE_BOUND('',#9454,.F.); +#9454 = EDGE_LOOP('',(#9455,#9456,#9464,#9470)); +#9455 = ORIENTED_EDGE('',*,*,#9441,.F.); +#9456 = ORIENTED_EDGE('',*,*,#9457,.T.); +#9457 = EDGE_CURVE('',#9434,#9458,#9460,.T.); +#9458 = VERTEX_POINT('',#9459); +#9459 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#9460 = LINE('',#9461,#9462); +#9461 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#9462 = VECTOR('',#9463,1.); +#9463 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9464 = ORIENTED_EDGE('',*,*,#9465,.T.); +#9465 = EDGE_CURVE('',#9458,#8562,#9466,.T.); +#9466 = LINE('',#9467,#9468); +#9467 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#9468 = VECTOR('',#9469,1.); +#9469 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9470 = ORIENTED_EDGE('',*,*,#8561,.F.); +#9471 = PLANE('',#9472); +#9472 = AXIS2_PLACEMENT_3D('',#9473,#9474,#9475); +#9473 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#9474 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9475 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9476 = ADVANCED_FACE('',(#9477),#9495,.F.); +#9477 = FACE_BOUND('',#9478,.T.); +#9478 = EDGE_LOOP('',(#9479,#9487,#9493,#9494)); +#9479 = ORIENTED_EDGE('',*,*,#9480,.F.); +#9480 = EDGE_CURVE('',#9481,#8586,#9483,.T.); +#9481 = VERTEX_POINT('',#9482); +#9482 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#9483 = LINE('',#9484,#9485); +#9484 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#9485 = VECTOR('',#9486,1.); +#9486 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9487 = ORIENTED_EDGE('',*,*,#9488,.T.); +#9488 = EDGE_CURVE('',#9481,#9458,#9489,.T.); +#9489 = LINE('',#9490,#9491); +#9490 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#9491 = VECTOR('',#9492,1.); +#9492 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9493 = ORIENTED_EDGE('',*,*,#9465,.T.); +#9494 = ORIENTED_EDGE('',*,*,#8593,.F.); +#9495 = PLANE('',#9496); +#9496 = AXIS2_PLACEMENT_3D('',#9497,#9498,#9499); +#9497 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#9498 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9499 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9500 = ADVANCED_FACE('',(#9501),#9512,.T.); +#9501 = FACE_BOUND('',#9502,.F.); +#9502 = EDGE_LOOP('',(#9503,#9504,#9505,#9506)); +#9503 = ORIENTED_EDGE('',*,*,#9425,.F.); +#9504 = ORIENTED_EDGE('',*,*,#8611,.T.); +#9505 = ORIENTED_EDGE('',*,*,#9480,.F.); +#9506 = ORIENTED_EDGE('',*,*,#9507,.F.); +#9507 = EDGE_CURVE('',#9426,#9481,#9508,.T.); +#9508 = LINE('',#9509,#9510); +#9509 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#9510 = VECTOR('',#9511,1.); +#9511 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9512 = PLANE('',#9513); +#9513 = AXIS2_PLACEMENT_3D('',#9514,#9515,#9516); +#9514 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#9515 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9516 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9517 = ADVANCED_FACE('',(#9518),#9543,.F.); +#9518 = FACE_BOUND('',#9519,.T.); +#9519 = EDGE_LOOP('',(#9520,#9528,#9536,#9542)); +#9520 = ORIENTED_EDGE('',*,*,#9521,.F.); +#9521 = EDGE_CURVE('',#9522,#8627,#9524,.T.); +#9522 = VERTEX_POINT('',#9523); +#9523 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#9524 = LINE('',#9525,#9526); +#9525 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#9526 = VECTOR('',#9527,1.); +#9527 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9528 = ORIENTED_EDGE('',*,*,#9529,.T.); +#9529 = EDGE_CURVE('',#9522,#9530,#9532,.T.); +#9530 = VERTEX_POINT('',#9531); +#9531 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#9532 = LINE('',#9533,#9534); +#9533 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#9534 = VECTOR('',#9535,1.); +#9535 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9536 = ORIENTED_EDGE('',*,*,#9537,.T.); +#9537 = EDGE_CURVE('',#9530,#8635,#9538,.T.); +#9538 = LINE('',#9539,#9540); +#9539 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#9540 = VECTOR('',#9541,1.); +#9541 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9542 = ORIENTED_EDGE('',*,*,#8634,.F.); +#9543 = PLANE('',#9544); +#9544 = AXIS2_PLACEMENT_3D('',#9545,#9546,#9547); +#9545 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#9546 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9547 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9548 = ADVANCED_FACE('',(#9549),#9567,.T.); +#9549 = FACE_BOUND('',#9550,.F.); +#9550 = EDGE_LOOP('',(#9551,#9559,#9560,#9561)); +#9551 = ORIENTED_EDGE('',*,*,#9552,.F.); +#9552 = EDGE_CURVE('',#8657,#9553,#9555,.T.); +#9553 = VERTEX_POINT('',#9554); +#9554 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#9555 = LINE('',#9556,#9557); +#9556 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#9557 = VECTOR('',#9558,1.); +#9558 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9559 = ORIENTED_EDGE('',*,*,#8666,.T.); +#9560 = ORIENTED_EDGE('',*,*,#9521,.F.); +#9561 = ORIENTED_EDGE('',*,*,#9562,.F.); +#9562 = EDGE_CURVE('',#9553,#9522,#9563,.T.); +#9563 = LINE('',#9564,#9565); +#9564 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#9565 = VECTOR('',#9566,1.); +#9566 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9567 = PLANE('',#9568); +#9568 = AXIS2_PLACEMENT_3D('',#9569,#9570,#9571); +#9569 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#9570 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9571 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9572 = ADVANCED_FACE('',(#9573),#9591,.T.); +#9573 = FACE_BOUND('',#9574,.F.); +#9574 = EDGE_LOOP('',(#9575,#9576,#9584,#9590)); +#9575 = ORIENTED_EDGE('',*,*,#9552,.T.); +#9576 = ORIENTED_EDGE('',*,*,#9577,.T.); +#9577 = EDGE_CURVE('',#9553,#9578,#9580,.T.); +#9578 = VERTEX_POINT('',#9579); +#9579 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#9580 = LINE('',#9581,#9582); +#9581 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#9582 = VECTOR('',#9583,1.); +#9583 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9584 = ORIENTED_EDGE('',*,*,#9585,.T.); +#9585 = EDGE_CURVE('',#9578,#8683,#9586,.T.); +#9586 = LINE('',#9587,#9588); +#9587 = CARTESIAN_POINT('',(5.146666666667,0.146666666667,6.473333333333 + )); +#9588 = VECTOR('',#9589,1.); +#9589 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9590 = ORIENTED_EDGE('',*,*,#8682,.F.); +#9591 = PLANE('',#9592); +#9592 = AXIS2_PLACEMENT_3D('',#9593,#9594,#9595); +#9593 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#9594 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9595 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9596 = ADVANCED_FACE('',(#9597),#9608,.T.); +#9597 = FACE_BOUND('',#9598,.F.); +#9598 = EDGE_LOOP('',(#9599,#9600,#9606,#9607)); +#9599 = ORIENTED_EDGE('',*,*,#9585,.F.); +#9600 = ORIENTED_EDGE('',*,*,#9601,.T.); +#9601 = EDGE_CURVE('',#9578,#9530,#9602,.T.); +#9602 = LINE('',#9603,#9604); +#9603 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#9604 = VECTOR('',#9605,1.); +#9605 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9606 = ORIENTED_EDGE('',*,*,#9537,.T.); +#9607 = ORIENTED_EDGE('',*,*,#8705,.F.); +#9608 = PLANE('',#9609); +#9609 = AXIS2_PLACEMENT_3D('',#9610,#9611,#9612); +#9610 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#9611 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9612 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9613 = ADVANCED_FACE('',(#9614),#9639,.T.); +#9614 = FACE_BOUND('',#9615,.F.); +#9615 = EDGE_LOOP('',(#9616,#9624,#9632,#9638)); +#9616 = ORIENTED_EDGE('',*,*,#9617,.F.); +#9617 = EDGE_CURVE('',#9618,#8722,#9620,.T.); +#9618 = VERTEX_POINT('',#9619); +#9619 = CARTESIAN_POINT('',(7.62,0.12,6.5)); +#9620 = LINE('',#9621,#9622); +#9621 = CARTESIAN_POINT('',(7.646666666667,0.146666666667,6.473333333333 + )); +#9622 = VECTOR('',#9623,1.); +#9623 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9624 = ORIENTED_EDGE('',*,*,#9625,.T.); +#9625 = EDGE_CURVE('',#9618,#9626,#9628,.T.); +#9626 = VERTEX_POINT('',#9627); +#9627 = CARTESIAN_POINT('',(7.38,0.12,6.5)); +#9628 = LINE('',#9629,#9630); +#9629 = CARTESIAN_POINT('',(7.82,0.12,6.5)); +#9630 = VECTOR('',#9631,1.); +#9631 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9632 = ORIENTED_EDGE('',*,*,#9633,.T.); +#9633 = EDGE_CURVE('',#9626,#8730,#9634,.T.); +#9634 = LINE('',#9635,#9636); +#9635 = CARTESIAN_POINT('',(7.46,4.E-02,6.58)); +#9636 = VECTOR('',#9637,1.); +#9637 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9638 = ORIENTED_EDGE('',*,*,#8729,.F.); +#9639 = PLANE('',#9640); +#9640 = AXIS2_PLACEMENT_3D('',#9641,#9642,#9643); +#9641 = CARTESIAN_POINT('',(7.82,0.22,6.4)); +#9642 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9643 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9644 = ADVANCED_FACE('',(#9645),#9663,.F.); +#9645 = FACE_BOUND('',#9646,.T.); +#9646 = EDGE_LOOP('',(#9647,#9655,#9661,#9662)); +#9647 = ORIENTED_EDGE('',*,*,#9648,.F.); +#9648 = EDGE_CURVE('',#9649,#8754,#9651,.T.); +#9649 = VERTEX_POINT('',#9650); +#9650 = CARTESIAN_POINT('',(7.38,-0.12,6.5)); +#9651 = LINE('',#9652,#9653); +#9652 = CARTESIAN_POINT('',(7.353333333333,-0.146666666667, + 6.473333333333)); +#9653 = VECTOR('',#9654,1.); +#9654 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9655 = ORIENTED_EDGE('',*,*,#9656,.T.); +#9656 = EDGE_CURVE('',#9649,#9626,#9657,.T.); +#9657 = LINE('',#9658,#9659); +#9658 = CARTESIAN_POINT('',(7.38,-0.32,6.5)); +#9659 = VECTOR('',#9660,1.); +#9660 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9661 = ORIENTED_EDGE('',*,*,#9633,.T.); +#9662 = ORIENTED_EDGE('',*,*,#8761,.F.); +#9663 = PLANE('',#9664); +#9664 = AXIS2_PLACEMENT_3D('',#9665,#9666,#9667); +#9665 = CARTESIAN_POINT('',(7.28,-0.32,6.4)); +#9666 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9667 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9668 = ADVANCED_FACE('',(#9669),#9687,.T.); +#9669 = FACE_BOUND('',#9670,.F.); +#9670 = EDGE_LOOP('',(#9671,#9679,#9680,#9681)); +#9671 = ORIENTED_EDGE('',*,*,#9672,.F.); +#9672 = EDGE_CURVE('',#8777,#9673,#9675,.T.); +#9673 = VERTEX_POINT('',#9674); +#9674 = CARTESIAN_POINT('',(7.62,-0.12,6.5)); +#9675 = LINE('',#9676,#9677); +#9676 = CARTESIAN_POINT('',(7.753333333333,-0.253333333333, + 6.366666666667)); +#9677 = VECTOR('',#9678,1.); +#9678 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9679 = ORIENTED_EDGE('',*,*,#8786,.T.); +#9680 = ORIENTED_EDGE('',*,*,#9648,.F.); +#9681 = ORIENTED_EDGE('',*,*,#9682,.F.); +#9682 = EDGE_CURVE('',#9673,#9649,#9683,.T.); +#9683 = LINE('',#9684,#9685); +#9684 = CARTESIAN_POINT('',(7.82,-0.12,6.5)); +#9685 = VECTOR('',#9686,1.); +#9686 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9687 = PLANE('',#9688); +#9688 = AXIS2_PLACEMENT_3D('',#9689,#9690,#9691); +#9689 = CARTESIAN_POINT('',(7.82,-0.22,6.4)); +#9690 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9691 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9692 = ADVANCED_FACE('',(#9693),#9704,.T.); +#9693 = FACE_BOUND('',#9694,.F.); +#9694 = EDGE_LOOP('',(#9695,#9696,#9702,#9703)); +#9695 = ORIENTED_EDGE('',*,*,#9672,.T.); +#9696 = ORIENTED_EDGE('',*,*,#9697,.T.); +#9697 = EDGE_CURVE('',#9673,#9618,#9698,.T.); +#9698 = LINE('',#9699,#9700); +#9699 = CARTESIAN_POINT('',(7.62,-0.32,6.5)); +#9700 = VECTOR('',#9701,1.); +#9701 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9702 = ORIENTED_EDGE('',*,*,#9617,.T.); +#9703 = ORIENTED_EDGE('',*,*,#8802,.F.); +#9704 = PLANE('',#9705); +#9705 = AXIS2_PLACEMENT_3D('',#9706,#9707,#9708); +#9706 = CARTESIAN_POINT('',(7.72,-0.32,6.4)); +#9707 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9708 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9709 = ADVANCED_FACE('',(#9710),#9751,.F.); +#9710 = FACE_BOUND('',#9711,.T.); +#9711 = EDGE_LOOP('',(#9712,#9722,#9730,#9738,#9744,#9745)); +#9712 = ORIENTED_EDGE('',*,*,#9713,.F.); +#9713 = EDGE_CURVE('',#9714,#9716,#9718,.T.); +#9714 = VERTEX_POINT('',#9715); +#9715 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#9716 = VERTEX_POINT('',#9717); +#9717 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#9718 = LINE('',#9719,#9720); +#9719 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#9720 = VECTOR('',#9721,1.); +#9721 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#9722 = ORIENTED_EDGE('',*,*,#9723,.T.); +#9723 = EDGE_CURVE('',#9714,#9724,#9726,.T.); +#9724 = VERTEX_POINT('',#9725); +#9725 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#9726 = LINE('',#9727,#9728); +#9727 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#9728 = VECTOR('',#9729,1.); +#9729 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9730 = ORIENTED_EDGE('',*,*,#9731,.T.); +#9731 = EDGE_CURVE('',#9724,#9732,#9734,.T.); +#9732 = VERTEX_POINT('',#9733); +#9733 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#9734 = LINE('',#9735,#9736); +#9735 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#9736 = VECTOR('',#9737,1.); +#9737 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#9738 = ORIENTED_EDGE('',*,*,#9739,.T.); +#9739 = EDGE_CURVE('',#9732,#8820,#9740,.T.); +#9740 = LINE('',#9741,#9742); +#9741 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#9742 = VECTOR('',#9743,1.); +#9743 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#9744 = ORIENTED_EDGE('',*,*,#8817,.F.); +#9745 = ORIENTED_EDGE('',*,*,#9746,.F.); +#9746 = EDGE_CURVE('',#9716,#8818,#9747,.T.); +#9747 = LINE('',#9748,#9749); +#9748 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#9749 = VECTOR('',#9750,1.); +#9750 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#9751 = PLANE('',#9752); +#9752 = AXIS2_PLACEMENT_3D('',#9753,#9754,#9755); +#9753 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#9754 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9755 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#9756 = ADVANCED_FACE('',(#9757),#9782,.F.); +#9757 = FACE_BOUND('',#9758,.F.); +#9758 = EDGE_LOOP('',(#9759,#9760,#9766,#9767,#9768,#9776)); +#9759 = ORIENTED_EDGE('',*,*,#8946,.F.); +#9760 = ORIENTED_EDGE('',*,*,#9761,.T.); +#9761 = EDGE_CURVE('',#8939,#8859,#9762,.T.); +#9762 = LINE('',#9763,#9764); +#9763 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#9764 = VECTOR('',#9765,1.); +#9765 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9766 = ORIENTED_EDGE('',*,*,#8866,.T.); +#9767 = ORIENTED_EDGE('',*,*,#9746,.F.); +#9768 = ORIENTED_EDGE('',*,*,#9769,.F.); +#9769 = EDGE_CURVE('',#9770,#9716,#9772,.T.); +#9770 = VERTEX_POINT('',#9771); +#9771 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#9772 = LINE('',#9773,#9774); +#9773 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#9774 = VECTOR('',#9775,1.); +#9775 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9776 = ORIENTED_EDGE('',*,*,#9777,.T.); +#9777 = EDGE_CURVE('',#9770,#8905,#9778,.T.); +#9778 = LINE('',#9779,#9780); +#9779 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#9780 = VECTOR('',#9781,1.); +#9781 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#9782 = PLANE('',#9783); +#9783 = AXIS2_PLACEMENT_3D('',#9784,#9785,#9786); +#9784 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#9785 = DIRECTION('',(-1.209660753807E-16,-0.987762965329,0.155962573473 + )); +#9786 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#9787 = ADVANCED_FACE('',(#9788),#9794,.F.); +#9788 = FACE_BOUND('',#9789,.F.); +#9789 = EDGE_LOOP('',(#9790,#9791,#9792,#9793)); +#9790 = ORIENTED_EDGE('',*,*,#8963,.T.); +#9791 = ORIENTED_EDGE('',*,*,#8858,.T.); +#9792 = ORIENTED_EDGE('',*,*,#9761,.F.); +#9793 = ORIENTED_EDGE('',*,*,#8938,.F.); +#9794 = PLANE('',#9795); +#9795 = AXIS2_PLACEMENT_3D('',#9796,#9797,#9798); +#9796 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#9797 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#9798 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#9799 = ADVANCED_FACE('',(#9800),#9811,.F.); +#9800 = FACE_BOUND('',#9801,.F.); +#9801 = EDGE_LOOP('',(#9802,#9808,#9809,#9810)); +#9802 = ORIENTED_EDGE('',*,*,#9803,.T.); +#9803 = EDGE_CURVE('',#8915,#8828,#9804,.T.); +#9804 = LINE('',#9805,#9806); +#9805 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#9806 = VECTOR('',#9807,1.); +#9807 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9808 = ORIENTED_EDGE('',*,*,#8835,.T.); +#9809 = ORIENTED_EDGE('',*,*,#8888,.F.); +#9810 = ORIENTED_EDGE('',*,*,#8922,.F.); +#9811 = PLANE('',#9812); +#9812 = AXIS2_PLACEMENT_3D('',#9813,#9814,#9815); +#9813 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#9814 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#9815 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#9816 = ADVANCED_FACE('',(#9817),#9837,.F.); +#9817 = FACE_BOUND('',#9818,.F.); +#9818 = EDGE_LOOP('',(#9819,#9820,#9828,#9834,#9835,#9836)); +#9819 = ORIENTED_EDGE('',*,*,#8914,.F.); +#9820 = ORIENTED_EDGE('',*,*,#9821,.F.); +#9821 = EDGE_CURVE('',#9822,#8907,#9824,.T.); +#9822 = VERTEX_POINT('',#9823); +#9823 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#9824 = LINE('',#9825,#9826); +#9825 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#9826 = VECTOR('',#9827,1.); +#9827 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#9828 = ORIENTED_EDGE('',*,*,#9829,.T.); +#9829 = EDGE_CURVE('',#9822,#9732,#9830,.T.); +#9830 = LINE('',#9831,#9832); +#9831 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#9832 = VECTOR('',#9833,1.); +#9833 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9834 = ORIENTED_EDGE('',*,*,#9739,.T.); +#9835 = ORIENTED_EDGE('',*,*,#8827,.T.); +#9836 = ORIENTED_EDGE('',*,*,#9803,.F.); +#9837 = PLANE('',#9838); +#9838 = AXIS2_PLACEMENT_3D('',#9839,#9840,#9841); +#9839 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#9840 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473) + ); +#9841 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#9842 = ADVANCED_FACE('',(#9843),#9870,.T.); +#9843 = FACE_BOUND('',#9844,.F.); +#9844 = EDGE_LOOP('',(#9845,#9853,#9861,#9867,#9868,#9869)); +#9845 = ORIENTED_EDGE('',*,*,#9846,.F.); +#9846 = EDGE_CURVE('',#9847,#9770,#9849,.T.); +#9847 = VERTEX_POINT('',#9848); +#9848 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#9849 = LINE('',#9850,#9851); +#9850 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225) + ); +#9851 = VECTOR('',#9852,1.); +#9852 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#9853 = ORIENTED_EDGE('',*,*,#9854,.T.); +#9854 = EDGE_CURVE('',#9847,#9855,#9857,.T.); +#9855 = VERTEX_POINT('',#9856); +#9856 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#9857 = LINE('',#9858,#9859); +#9858 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#9859 = VECTOR('',#9860,1.); +#9860 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9861 = ORIENTED_EDGE('',*,*,#9862,.T.); +#9862 = EDGE_CURVE('',#9855,#9822,#9863,.T.); +#9863 = LINE('',#9864,#9865); +#9864 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#9865 = VECTOR('',#9866,1.); +#9866 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#9867 = ORIENTED_EDGE('',*,*,#9821,.T.); +#9868 = ORIENTED_EDGE('',*,*,#8904,.F.); +#9869 = ORIENTED_EDGE('',*,*,#9777,.F.); +#9870 = PLANE('',#9871); +#9871 = AXIS2_PLACEMENT_3D('',#9872,#9873,#9874); +#9872 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#9873 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9874 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#9875 = ADVANCED_FACE('',(#9876),#9901,.T.); +#9876 = FACE_BOUND('',#9877,.F.); +#9877 = EDGE_LOOP('',(#9878,#9886,#9894,#9900)); +#9878 = ORIENTED_EDGE('',*,*,#9879,.F.); +#9879 = EDGE_CURVE('',#9880,#8978,#9882,.T.); +#9880 = VERTEX_POINT('',#9881); +#9881 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#9882 = LINE('',#9883,#9884); +#9883 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#9884 = VECTOR('',#9885,1.); +#9885 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#9886 = ORIENTED_EDGE('',*,*,#9887,.T.); +#9887 = EDGE_CURVE('',#9880,#9888,#9890,.T.); +#9888 = VERTEX_POINT('',#9889); +#9889 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#9890 = LINE('',#9891,#9892); +#9891 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#9892 = VECTOR('',#9893,1.); +#9893 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9894 = ORIENTED_EDGE('',*,*,#9895,.T.); +#9895 = EDGE_CURVE('',#9888,#8980,#9896,.T.); +#9896 = LINE('',#9897,#9898); +#9897 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#9898 = VECTOR('',#9899,1.); +#9899 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#9900 = ORIENTED_EDGE('',*,*,#8977,.F.); +#9901 = PLANE('',#9902); +#9902 = AXIS2_PLACEMENT_3D('',#9903,#9904,#9905); +#9903 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#9904 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9905 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#9906 = ADVANCED_FACE('',(#9907),#9925,.T.); +#9907 = FACE_BOUND('',#9908,.T.); +#9908 = EDGE_LOOP('',(#9909,#9910,#9918,#9924)); +#9909 = ORIENTED_EDGE('',*,*,#9879,.F.); +#9910 = ORIENTED_EDGE('',*,*,#9911,.T.); +#9911 = EDGE_CURVE('',#9880,#9912,#9914,.T.); +#9912 = VERTEX_POINT('',#9913); +#9913 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#9914 = LINE('',#9915,#9916); +#9915 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#9916 = VECTOR('',#9917,1.); +#9917 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9918 = ORIENTED_EDGE('',*,*,#9919,.T.); +#9919 = EDGE_CURVE('',#9912,#9011,#9920,.T.); +#9920 = LINE('',#9921,#9922); +#9921 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#9922 = VECTOR('',#9923,1.); +#9923 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9924 = ORIENTED_EDGE('',*,*,#9018,.F.); +#9925 = PLANE('',#9926); +#9926 = AXIS2_PLACEMENT_3D('',#9927,#9928,#9929); +#9927 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#9928 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187) + ); +#9929 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#9930 = ADVANCED_FACE('',(#9931),#9949,.F.); +#9931 = FACE_BOUND('',#9932,.T.); +#9932 = EDGE_LOOP('',(#9933,#9934,#9942,#9948)); +#9933 = ORIENTED_EDGE('',*,*,#9919,.F.); +#9934 = ORIENTED_EDGE('',*,*,#9935,.T.); +#9935 = EDGE_CURVE('',#9912,#9936,#9938,.T.); +#9936 = VERTEX_POINT('',#9937); +#9937 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#9938 = LINE('',#9939,#9940); +#9939 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#9940 = VECTOR('',#9941,1.); +#9941 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9942 = ORIENTED_EDGE('',*,*,#9943,.T.); +#9943 = EDGE_CURVE('',#9936,#9033,#9944,.T.); +#9944 = LINE('',#9945,#9946); +#9945 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#9946 = VECTOR('',#9947,1.); +#9947 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#9948 = ORIENTED_EDGE('',*,*,#9032,.F.); +#9949 = PLANE('',#9950); +#9950 = AXIS2_PLACEMENT_3D('',#9951,#9952,#9953); +#9951 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#9952 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9953 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#9954 = ADVANCED_FACE('',(#9955),#9966,.T.); +#9955 = FACE_BOUND('',#9956,.F.); +#9956 = EDGE_LOOP('',(#9957,#9958,#9964,#9965)); +#9957 = ORIENTED_EDGE('',*,*,#9895,.F.); +#9958 = ORIENTED_EDGE('',*,*,#9959,.T.); +#9959 = EDGE_CURVE('',#9888,#9936,#9960,.T.); +#9960 = LINE('',#9961,#9962); +#9961 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#9962 = VECTOR('',#9963,1.); +#9963 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9964 = ORIENTED_EDGE('',*,*,#9943,.T.); +#9965 = ORIENTED_EDGE('',*,*,#9057,.F.); +#9966 = PLANE('',#9967); +#9967 = AXIS2_PLACEMENT_3D('',#9968,#9969,#9970); +#9968 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#9969 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#9970 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#9971 = ADVANCED_FACE('',(#9972),#9997,.F.); +#9972 = FACE_BOUND('',#9973,.T.); +#9973 = EDGE_LOOP('',(#9974,#9982,#9990,#9996)); +#9974 = ORIENTED_EDGE('',*,*,#9975,.F.); +#9975 = EDGE_CURVE('',#9976,#9074,#9978,.T.); +#9976 = VERTEX_POINT('',#9977); +#9977 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#9978 = LINE('',#9979,#9980); +#9979 = CARTESIAN_POINT('',(4.853333333333,0.146666666667, + -3.373333333333)); +#9980 = VECTOR('',#9981,1.); +#9981 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9982 = ORIENTED_EDGE('',*,*,#9983,.T.); +#9983 = EDGE_CURVE('',#9976,#9984,#9986,.T.); +#9984 = VERTEX_POINT('',#9985); +#9985 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#9986 = LINE('',#9987,#9988); +#9987 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#9988 = VECTOR('',#9989,1.); +#9989 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9990 = ORIENTED_EDGE('',*,*,#9991,.T.); +#9991 = EDGE_CURVE('',#9984,#9076,#9992,.T.); +#9992 = LINE('',#9993,#9994); +#9993 = CARTESIAN_POINT('',(4.96,-4.E-02,-3.48)); +#9994 = VECTOR('',#9995,1.); +#9995 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#9996 = ORIENTED_EDGE('',*,*,#9073,.F.); +#9997 = PLANE('',#9998); +#9998 = AXIS2_PLACEMENT_3D('',#9999,#10000,#10001); +#9999 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#10000 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#10001 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#10002 = ADVANCED_FACE('',(#10003),#10021,.T.); +#10003 = FACE_BOUND('',#10004,.F.); +#10004 = EDGE_LOOP('',(#10005,#10013,#10019,#10020)); +#10005 = ORIENTED_EDGE('',*,*,#10006,.F.); +#10006 = EDGE_CURVE('',#10007,#9105,#10009,.T.); +#10007 = VERTEX_POINT('',#10008); +#10008 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#10009 = LINE('',#10010,#10011); +#10010 = CARTESIAN_POINT('',(5.146666666667,-0.146666666667, + -3.373333333333)); +#10011 = VECTOR('',#10012,1.); +#10012 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#10013 = ORIENTED_EDGE('',*,*,#10014,.T.); +#10014 = EDGE_CURVE('',#10007,#9984,#10015,.T.); +#10015 = LINE('',#10016,#10017); +#10016 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#10017 = VECTOR('',#10018,1.); +#10018 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10019 = ORIENTED_EDGE('',*,*,#9991,.T.); +#10020 = ORIENTED_EDGE('',*,*,#9112,.F.); +#10021 = PLANE('',#10022); +#10022 = AXIS2_PLACEMENT_3D('',#10023,#10024,#10025); +#10023 = CARTESIAN_POINT('',(5.32,-0.22,-3.3)); +#10024 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#10025 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#10026 = ADVANCED_FACE('',(#10027),#10045,.T.); +#10027 = FACE_BOUND('',#10028,.F.); +#10028 = EDGE_LOOP('',(#10029,#10037,#10043,#10044)); +#10029 = ORIENTED_EDGE('',*,*,#10030,.F.); +#10030 = EDGE_CURVE('',#10031,#9129,#10033,.T.); +#10031 = VERTEX_POINT('',#10032); +#10032 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#10033 = LINE('',#10034,#10035); +#10034 = CARTESIAN_POINT('',(5.253333333333,0.253333333333, + -3.266666666667)); +#10035 = VECTOR('',#10036,1.); +#10036 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#10037 = ORIENTED_EDGE('',*,*,#10038,.T.); +#10038 = EDGE_CURVE('',#10031,#10007,#10039,.T.); +#10039 = LINE('',#10040,#10041); +#10040 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#10041 = VECTOR('',#10042,1.); +#10042 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10043 = ORIENTED_EDGE('',*,*,#10006,.T.); +#10044 = ORIENTED_EDGE('',*,*,#9128,.F.); +#10045 = PLANE('',#10046); +#10046 = AXIS2_PLACEMENT_3D('',#10047,#10048,#10049); +#10047 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#10048 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#10049 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#10050 = ADVANCED_FACE('',(#10051),#10062,.T.); +#10051 = FACE_BOUND('',#10052,.T.); +#10052 = EDGE_LOOP('',(#10053,#10054,#10060,#10061)); +#10053 = ORIENTED_EDGE('',*,*,#10030,.F.); +#10054 = ORIENTED_EDGE('',*,*,#10055,.T.); +#10055 = EDGE_CURVE('',#10031,#9976,#10056,.T.); +#10056 = LINE('',#10057,#10058); +#10057 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#10058 = VECTOR('',#10059,1.); +#10059 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10060 = ORIENTED_EDGE('',*,*,#9975,.T.); +#10061 = ORIENTED_EDGE('',*,*,#9155,.F.); +#10062 = PLANE('',#10063); +#10063 = AXIS2_PLACEMENT_3D('',#10064,#10065,#10066); +#10064 = CARTESIAN_POINT('',(5.32,0.22,-3.3)); +#10065 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#10066 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#10067 = ADVANCED_FACE('',(#10068),#10079,.F.); +#10068 = FACE_BOUND('',#10069,.F.); +#10069 = EDGE_LOOP('',(#10070,#10071,#10072,#10078)); +#10070 = ORIENTED_EDGE('',*,*,#9186,.T.); +#10071 = ORIENTED_EDGE('',*,*,#9234,.T.); +#10072 = ORIENTED_EDGE('',*,*,#10073,.F.); +#10073 = EDGE_CURVE('',#9308,#9235,#10074,.T.); +#10074 = LINE('',#10075,#10076); +#10075 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#10076 = VECTOR('',#10077,1.); +#10077 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10078 = ORIENTED_EDGE('',*,*,#9307,.F.); +#10079 = PLANE('',#10080); +#10080 = AXIS2_PLACEMENT_3D('',#10081,#10082,#10083); +#10081 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#10082 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#10083 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#10084 = ADVANCED_FACE('',(#10085),#10126,.F.); +#10085 = FACE_BOUND('',#10086,.T.); +#10086 = EDGE_LOOP('',(#10087,#10097,#10105,#10113,#10119,#10120)); +#10087 = ORIENTED_EDGE('',*,*,#10088,.F.); +#10088 = EDGE_CURVE('',#10089,#10091,#10093,.T.); +#10089 = VERTEX_POINT('',#10090); +#10090 = CARTESIAN_POINT('',(7.38,0.12,-3.4)); +#10091 = VERTEX_POINT('',#10092); +#10092 = CARTESIAN_POINT('',(7.182447406934,0.351192514695, + -3.202447406934)); +#10093 = LINE('',#10094,#10095); +#10094 = CARTESIAN_POINT('',(7.346150901889,0.159613036666, + -3.366150901889)); +#10095 = VECTOR('',#10096,1.); +#10096 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#10097 = ORIENTED_EDGE('',*,*,#10098,.T.); +#10098 = EDGE_CURVE('',#10089,#10099,#10101,.T.); +#10099 = VERTEX_POINT('',#10100); +#10100 = CARTESIAN_POINT('',(7.38,-0.12,-3.4)); +#10101 = LINE('',#10102,#10103); +#10102 = CARTESIAN_POINT('',(7.38,0.32,-3.4)); +#10103 = VECTOR('',#10104,1.); +#10104 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10105 = ORIENTED_EDGE('',*,*,#10106,.T.); +#10106 = EDGE_CURVE('',#10099,#10107,#10109,.T.); +#10107 = VERTEX_POINT('',#10108); +#10108 = CARTESIAN_POINT('',(7.182447406934,-0.288807485305, + -3.202447406934)); +#10109 = LINE('',#10110,#10111); +#10110 = CARTESIAN_POINT('',(7.461511443392,-5.034896900541E-02, + -3.481511443392)); +#10111 = VECTOR('',#10112,1.); +#10112 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#10113 = ORIENTED_EDGE('',*,*,#10114,.T.); +#10114 = EDGE_CURVE('',#10107,#9203,#10115,.T.); +#10115 = LINE('',#10116,#10117); +#10116 = CARTESIAN_POINT('',(7.414309165527,-0.325417236662, + -3.434309165527)); +#10117 = VECTOR('',#10118,1.); +#10118 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#10119 = ORIENTED_EDGE('',*,*,#9200,.F.); +#10120 = ORIENTED_EDGE('',*,*,#10121,.F.); +#10121 = EDGE_CURVE('',#10091,#9201,#10122,.T.); +#10122 = LINE('',#10123,#10124); +#10123 = CARTESIAN_POINT('',(6.958413132695,0.386566347469, + -2.978413132695)); +#10124 = VECTOR('',#10125,1.); +#10125 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#10126 = PLANE('',#10127); +#10127 = AXIS2_PLACEMENT_3D('',#10128,#10129,#10130); +#10128 = CARTESIAN_POINT('',(7.28,0.32,-3.3)); +#10129 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#10130 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#10131 = ADVANCED_FACE('',(#10132),#10152,.F.); +#10132 = FACE_BOUND('',#10133,.F.); +#10133 = EDGE_LOOP('',(#10134,#10135,#10136,#10137,#10138,#10146)); +#10134 = ORIENTED_EDGE('',*,*,#9315,.F.); +#10135 = ORIENTED_EDGE('',*,*,#10073,.T.); +#10136 = ORIENTED_EDGE('',*,*,#9242,.T.); +#10137 = ORIENTED_EDGE('',*,*,#10121,.F.); +#10138 = ORIENTED_EDGE('',*,*,#10139,.F.); +#10139 = EDGE_CURVE('',#10140,#10091,#10142,.T.); +#10140 = VERTEX_POINT('',#10141); +#10141 = CARTESIAN_POINT('',(7.817552593066,0.351192514695, + -3.202447406934)); +#10142 = LINE('',#10143,#10144); +#10143 = CARTESIAN_POINT('',(7.82,0.351192514695,-3.202447406934)); +#10144 = VECTOR('',#10145,1.); +#10145 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10146 = ORIENTED_EDGE('',*,*,#10147,.T.); +#10147 = EDGE_CURVE('',#10140,#9281,#10148,.T.); +#10148 = LINE('',#10149,#10150); +#10149 = CARTESIAN_POINT('',(8.199616963064,0.411518467852, + -2.820383036936)); +#10150 = VECTOR('',#10151,1.); +#10151 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#10152 = PLANE('',#10153); +#10153 = AXIS2_PLACEMENT_3D('',#10154,#10155,#10156); +#10154 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#10155 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#10156 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#10157 = ADVANCED_FACE('',(#10158),#10169,.F.); +#10158 = FACE_BOUND('',#10159,.F.); +#10159 = EDGE_LOOP('',(#10160,#10166,#10167,#10168)); +#10160 = ORIENTED_EDGE('',*,*,#10161,.T.); +#10161 = EDGE_CURVE('',#9291,#9211,#10162,.T.); +#10162 = LINE('',#10163,#10164); +#10163 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#10164 = VECTOR('',#10165,1.); +#10165 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10166 = ORIENTED_EDGE('',*,*,#9218,.T.); +#10167 = ORIENTED_EDGE('',*,*,#9264,.F.); +#10168 = ORIENTED_EDGE('',*,*,#9298,.F.); +#10169 = PLANE('',#10170); +#10170 = AXIS2_PLACEMENT_3D('',#10171,#10172,#10173); +#10171 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#10172 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#10173 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#10174 = ADVANCED_FACE('',(#10175),#10195,.F.); +#10175 = FACE_BOUND('',#10176,.F.); +#10176 = EDGE_LOOP('',(#10177,#10178,#10186,#10192,#10193,#10194)); +#10177 = ORIENTED_EDGE('',*,*,#9290,.F.); +#10178 = ORIENTED_EDGE('',*,*,#10179,.F.); +#10179 = EDGE_CURVE('',#10180,#9283,#10182,.T.); +#10180 = VERTEX_POINT('',#10181); +#10181 = CARTESIAN_POINT('',(7.817552593066,-0.288807485305, + -3.202447406934)); +#10182 = LINE('',#10183,#10184); +#10183 = CARTESIAN_POINT('',(7.743720930233,-0.300465116279, + -3.276279069767)); +#10184 = VECTOR('',#10185,1.); +#10185 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#10186 = ORIENTED_EDGE('',*,*,#10187,.T.); +#10187 = EDGE_CURVE('',#10180,#10107,#10188,.T.); +#10188 = LINE('',#10189,#10190); +#10189 = CARTESIAN_POINT('',(7.82,-0.288807485305,-3.202447406934)); +#10190 = VECTOR('',#10191,1.); +#10191 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10192 = ORIENTED_EDGE('',*,*,#10114,.T.); +#10193 = ORIENTED_EDGE('',*,*,#9210,.T.); +#10194 = ORIENTED_EDGE('',*,*,#10161,.F.); +#10195 = PLANE('',#10196); +#10196 = AXIS2_PLACEMENT_3D('',#10197,#10198,#10199); +#10197 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#10198 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#10199 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#10200 = ADVANCED_FACE('',(#10201),#10228,.T.); +#10201 = FACE_BOUND('',#10202,.F.); +#10202 = EDGE_LOOP('',(#10203,#10211,#10219,#10225,#10226,#10227)); +#10203 = ORIENTED_EDGE('',*,*,#10204,.F.); +#10204 = EDGE_CURVE('',#10205,#10140,#10207,.T.); +#10205 = VERTEX_POINT('',#10206); +#10206 = CARTESIAN_POINT('',(7.62,0.12,-3.4)); +#10207 = LINE('',#10208,#10209); +#10208 = CARTESIAN_POINT('',(7.74881689775,0.270752273427,-3.27118310225 + )); +#10209 = VECTOR('',#10210,1.); +#10210 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#10211 = ORIENTED_EDGE('',*,*,#10212,.T.); +#10212 = EDGE_CURVE('',#10205,#10213,#10215,.T.); +#10213 = VERTEX_POINT('',#10214); +#10214 = CARTESIAN_POINT('',(7.62,-0.12,-3.4)); +#10215 = LINE('',#10216,#10217); +#10216 = CARTESIAN_POINT('',(7.62,0.32,-3.4)); +#10217 = VECTOR('',#10218,1.); +#10218 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10219 = ORIENTED_EDGE('',*,*,#10220,.T.); +#10220 = EDGE_CURVE('',#10213,#10180,#10221,.T.); +#10221 = LINE('',#10222,#10223); +#10222 = CARTESIAN_POINT('',(7.655697812072,-0.150503562587, + -3.364302187928)); +#10223 = VECTOR('',#10224,1.); +#10224 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#10225 = ORIENTED_EDGE('',*,*,#10179,.T.); +#10226 = ORIENTED_EDGE('',*,*,#9280,.F.); +#10227 = ORIENTED_EDGE('',*,*,#10147,.F.); +#10228 = PLANE('',#10229); +#10229 = AXIS2_PLACEMENT_3D('',#10230,#10231,#10232); +#10230 = CARTESIAN_POINT('',(7.72,0.32,-3.3)); +#10231 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#10232 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#10233 = ADVANCED_FACE('',(#10234),#10240,.F.); +#10234 = FACE_BOUND('',#10235,.F.); +#10235 = EDGE_LOOP('',(#10236,#10237,#10238,#10239)); +#10236 = ORIENTED_EDGE('',*,*,#9409,.F.); +#10237 = ORIENTED_EDGE('',*,*,#9385,.F.); +#10238 = ORIENTED_EDGE('',*,*,#9370,.T.); +#10239 = ORIENTED_EDGE('',*,*,#9337,.T.); +#10240 = PLANE('',#10241); +#10241 = AXIS2_PLACEMENT_3D('',#10242,#10243,#10244); +#10242 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#10243 = DIRECTION('',(-0.,0.,-1.)); +#10244 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10245 = ADVANCED_FACE('',(#10246),#10252,.F.); +#10246 = FACE_BOUND('',#10247,.F.); +#10247 = EDGE_LOOP('',(#10248,#10249,#10250,#10251)); +#10248 = ORIENTED_EDGE('',*,*,#9457,.F.); +#10249 = ORIENTED_EDGE('',*,*,#9433,.F.); +#10250 = ORIENTED_EDGE('',*,*,#9507,.T.); +#10251 = ORIENTED_EDGE('',*,*,#9488,.T.); +#10252 = PLANE('',#10253); +#10253 = AXIS2_PLACEMENT_3D('',#10254,#10255,#10256); +#10254 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#10255 = DIRECTION('',(-0.,0.,-1.)); +#10256 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10257 = ADVANCED_FACE('',(#10258),#10264,.F.); +#10258 = FACE_BOUND('',#10259,.F.); +#10259 = EDGE_LOOP('',(#10260,#10261,#10262,#10263)); +#10260 = ORIENTED_EDGE('',*,*,#9601,.F.); +#10261 = ORIENTED_EDGE('',*,*,#9577,.F.); +#10262 = ORIENTED_EDGE('',*,*,#9562,.T.); +#10263 = ORIENTED_EDGE('',*,*,#9529,.T.); +#10264 = PLANE('',#10265); +#10265 = AXIS2_PLACEMENT_3D('',#10266,#10267,#10268); +#10266 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#10267 = DIRECTION('',(-0.,0.,-1.)); +#10268 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10269 = ADVANCED_FACE('',(#10270),#10276,.F.); +#10270 = FACE_BOUND('',#10271,.F.); +#10271 = EDGE_LOOP('',(#10272,#10273,#10274,#10275)); +#10272 = ORIENTED_EDGE('',*,*,#9625,.F.); +#10273 = ORIENTED_EDGE('',*,*,#9697,.F.); +#10274 = ORIENTED_EDGE('',*,*,#9682,.T.); +#10275 = ORIENTED_EDGE('',*,*,#9656,.T.); +#10276 = PLANE('',#10277); +#10277 = AXIS2_PLACEMENT_3D('',#10278,#10279,#10280); +#10278 = CARTESIAN_POINT('',(7.82,-0.32,6.5)); +#10279 = DIRECTION('',(-0.,0.,-1.)); +#10280 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10281 = ADVANCED_FACE('',(#10282),#10293,.T.); +#10282 = FACE_BOUND('',#10283,.T.); +#10283 = EDGE_LOOP('',(#10284,#10285,#10291,#10292)); +#10284 = ORIENTED_EDGE('',*,*,#9846,.F.); +#10285 = ORIENTED_EDGE('',*,*,#10286,.T.); +#10286 = EDGE_CURVE('',#9847,#9714,#10287,.T.); +#10287 = LINE('',#10288,#10289); +#10288 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#10289 = VECTOR('',#10290,1.); +#10290 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10291 = ORIENTED_EDGE('',*,*,#9713,.T.); +#10292 = ORIENTED_EDGE('',*,*,#9769,.F.); +#10293 = PLANE('',#10294); +#10294 = AXIS2_PLACEMENT_3D('',#10295,#10296,#10297); +#10295 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#10296 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#10297 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#10298 = ADVANCED_FACE('',(#10299),#10310,.F.); +#10299 = FACE_BOUND('',#10300,.F.); +#10300 = EDGE_LOOP('',(#10301,#10302,#10303,#10304)); +#10301 = ORIENTED_EDGE('',*,*,#9854,.F.); +#10302 = ORIENTED_EDGE('',*,*,#10286,.T.); +#10303 = ORIENTED_EDGE('',*,*,#9723,.T.); +#10304 = ORIENTED_EDGE('',*,*,#10305,.F.); +#10305 = EDGE_CURVE('',#9855,#9724,#10306,.T.); +#10306 = LINE('',#10307,#10308); +#10307 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#10308 = VECTOR('',#10309,1.); +#10309 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10310 = PLANE('',#10311); +#10311 = AXIS2_PLACEMENT_3D('',#10312,#10313,#10314); +#10312 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#10313 = DIRECTION('',(0.,0.,1.)); +#10314 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10315 = ADVANCED_FACE('',(#10316),#10322,.T.); +#10316 = FACE_BOUND('',#10317,.F.); +#10317 = EDGE_LOOP('',(#10318,#10319,#10320,#10321)); +#10318 = ORIENTED_EDGE('',*,*,#9862,.F.); +#10319 = ORIENTED_EDGE('',*,*,#10305,.T.); +#10320 = ORIENTED_EDGE('',*,*,#9731,.T.); +#10321 = ORIENTED_EDGE('',*,*,#9829,.F.); +#10322 = PLANE('',#10323); +#10323 = AXIS2_PLACEMENT_3D('',#10324,#10325,#10326); +#10324 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#10325 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#10326 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#10327 = ADVANCED_FACE('',(#10328),#10334,.F.); +#10328 = FACE_BOUND('',#10329,.F.); +#10329 = EDGE_LOOP('',(#10330,#10331,#10332,#10333)); +#10330 = ORIENTED_EDGE('',*,*,#9959,.F.); +#10331 = ORIENTED_EDGE('',*,*,#9887,.F.); +#10332 = ORIENTED_EDGE('',*,*,#9911,.T.); +#10333 = ORIENTED_EDGE('',*,*,#9935,.T.); +#10334 = PLANE('',#10335); +#10335 = AXIS2_PLACEMENT_3D('',#10336,#10337,#10338); +#10336 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#10337 = DIRECTION('',(0.,0.,1.)); +#10338 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10339 = ADVANCED_FACE('',(#10340),#10346,.F.); +#10340 = FACE_BOUND('',#10341,.F.); +#10341 = EDGE_LOOP('',(#10342,#10343,#10344,#10345)); +#10342 = ORIENTED_EDGE('',*,*,#10014,.F.); +#10343 = ORIENTED_EDGE('',*,*,#10038,.F.); +#10344 = ORIENTED_EDGE('',*,*,#10055,.T.); +#10345 = ORIENTED_EDGE('',*,*,#9983,.T.); +#10346 = PLANE('',#10347); +#10347 = AXIS2_PLACEMENT_3D('',#10348,#10349,#10350); +#10348 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#10349 = DIRECTION('',(0.,0.,1.)); +#10350 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10351 = ADVANCED_FACE('',(#10352),#10363,.T.); +#10352 = FACE_BOUND('',#10353,.T.); +#10353 = EDGE_LOOP('',(#10354,#10355,#10361,#10362)); +#10354 = ORIENTED_EDGE('',*,*,#10204,.F.); +#10355 = ORIENTED_EDGE('',*,*,#10356,.T.); +#10356 = EDGE_CURVE('',#10205,#10089,#10357,.T.); +#10357 = LINE('',#10358,#10359); +#10358 = CARTESIAN_POINT('',(7.82,0.12,-3.4)); +#10359 = VECTOR('',#10360,1.); +#10360 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10361 = ORIENTED_EDGE('',*,*,#10088,.T.); +#10362 = ORIENTED_EDGE('',*,*,#10139,.F.); +#10363 = PLANE('',#10364); +#10364 = AXIS2_PLACEMENT_3D('',#10365,#10366,#10367); +#10365 = CARTESIAN_POINT('',(7.82,0.235596257347,-3.301223703467)); +#10366 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#10367 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#10368 = ADVANCED_FACE('',(#10369),#10380,.F.); +#10369 = FACE_BOUND('',#10370,.F.); +#10370 = EDGE_LOOP('',(#10371,#10372,#10373,#10374)); +#10371 = ORIENTED_EDGE('',*,*,#10212,.F.); +#10372 = ORIENTED_EDGE('',*,*,#10356,.T.); +#10373 = ORIENTED_EDGE('',*,*,#10098,.T.); +#10374 = ORIENTED_EDGE('',*,*,#10375,.F.); +#10375 = EDGE_CURVE('',#10213,#10099,#10376,.T.); +#10376 = LINE('',#10377,#10378); +#10377 = CARTESIAN_POINT('',(7.82,-0.12,-3.4)); +#10378 = VECTOR('',#10379,1.); +#10379 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10380 = PLANE('',#10381); +#10381 = AXIS2_PLACEMENT_3D('',#10382,#10383,#10384); +#10382 = CARTESIAN_POINT('',(7.82,0.32,-3.4)); +#10383 = DIRECTION('',(0.,0.,1.)); +#10384 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10385 = ADVANCED_FACE('',(#10386),#10392,.T.); +#10386 = FACE_BOUND('',#10387,.F.); +#10387 = EDGE_LOOP('',(#10388,#10389,#10390,#10391)); +#10388 = ORIENTED_EDGE('',*,*,#10220,.F.); +#10389 = ORIENTED_EDGE('',*,*,#10375,.T.); +#10390 = ORIENTED_EDGE('',*,*,#10106,.T.); +#10391 = ORIENTED_EDGE('',*,*,#10187,.F.); +#10392 = PLANE('',#10393); +#10393 = AXIS2_PLACEMENT_3D('',#10394,#10395,#10396); +#10394 = CARTESIAN_POINT('',(7.82,-0.204403742653,-3.301223703467)); +#10395 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#10396 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#10397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10401)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#10398,#10399,#10400)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#10398 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#10399 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#10400 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#10401 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#10398, + 'distance_accuracy_value','confusion accuracy'); +#10402 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10403,#10405); +#10403 = ( REPRESENTATION_RELATIONSHIP('','',#6201,#6178) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10404) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10404 = ITEM_DEFINED_TRANSFORMATION('','',#11,#6179); +#10405 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10406); +#10406 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','=>[0:1:1:9]','',#6173,#6196 + ,$); +#10407 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#6198)); +#10408 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10409,#10411); +#10409 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10410) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10410 = ITEM_DEFINED_TRANSFORMATION('','',#11,#35); +#10411 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10412); +#10412 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','Ren2','',#5,#523,$); +#10413 = SHAPE_DEFINITION_REPRESENTATION(#10414,#10420); +#10414 = PRODUCT_DEFINITION_SHAPE('','',#10415); +#10415 = PRODUCT_DEFINITION('design','',#10416,#10419); +#10416 = PRODUCT_DEFINITION_FORMATION('','',#10417); +#10417 = PRODUCT('LED_0805_2012Metric','LED_0805_2012Metric','',(#10418) + ); +#10418 = PRODUCT_CONTEXT('',#2,'mechanical'); +#10419 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10420 = SHAPE_REPRESENTATION('',(#11,#10421),#10425); +#10421 = AXIS2_PLACEMENT_3D('',#10422,#10423,#10424); +#10422 = CARTESIAN_POINT('',(0.,0.,0.)); +#10423 = DIRECTION('',(0.,0.,1.)); +#10424 = DIRECTION('',(1.,0.,-0.)); +#10425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10429)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#10426,#10427,#10428)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#10426 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#10427 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#10428 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#10429 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#10426, + 'distance_accuracy_value','confusion accuracy'); +#10430 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10431,#10433); +#10431 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10432) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10432 = ITEM_DEFINED_TRANSFORMATION('','',#11,#39); +#10433 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10434); +#10434 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','DB2','',#5,#10415,$); +#10435 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#10417)); +#10436 = SHAPE_DEFINITION_REPRESENTATION(#10437,#10443); +#10437 = PRODUCT_DEFINITION_SHAPE('','',#10438); +#10438 = PRODUCT_DEFINITION('design','',#10439,#10442); +#10439 = PRODUCT_DEFINITION_FORMATION('','',#10440); +#10440 = PRODUCT('LED_0805_2012Metric','LED_0805_2012Metric','',(#10441) + ); +#10441 = PRODUCT_CONTEXT('',#2,'mechanical'); +#10442 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10443 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#10444),#11967); +#10444 = MANIFOLD_SOLID_BREP('',#10445); +#10445 = CLOSED_SHELL('',(#10446,#10486,#10533,#10612,#10636,#10676, + #10707,#10724,#10757,#10781,#10848,#10969,#11036,#11060,#11091, + #11124,#11180,#11204,#11228,#11252,#11285,#11297,#11360,#11385, + #11402,#11426,#11444,#11462,#11480,#11497,#11514,#11545,#11570, + #11595,#11619,#11636,#11667,#11691,#11708,#11736,#11761,#11785, + #11810,#11857,#11874,#11886,#11908,#11920,#11938,#11956)); +#10446 = ADVANCED_FACE('',(#10447),#10481,.F.); +#10447 = FACE_BOUND('',#10448,.F.); +#10448 = EDGE_LOOP('',(#10449,#10459,#10467,#10475)); +#10449 = ORIENTED_EDGE('',*,*,#10450,.T.); +#10450 = EDGE_CURVE('',#10451,#10453,#10455,.T.); +#10451 = VERTEX_POINT('',#10452); +#10452 = CARTESIAN_POINT('',(-0.65,-0.625,0.465)); +#10453 = VERTEX_POINT('',#10454); +#10454 = CARTESIAN_POINT('',(-0.585,-0.625,1.1)); +#10455 = LINE('',#10456,#10457); +#10456 = CARTESIAN_POINT('',(-0.65,-0.625,0.465)); +#10457 = VECTOR('',#10458,1.); +#10458 = DIRECTION('',(0.101830105936,0.,0.994801804142)); +#10459 = ORIENTED_EDGE('',*,*,#10460,.T.); +#10460 = EDGE_CURVE('',#10453,#10461,#10463,.T.); +#10461 = VERTEX_POINT('',#10462); +#10462 = CARTESIAN_POINT('',(0.585,-0.625,1.1)); +#10463 = LINE('',#10464,#10465); +#10464 = CARTESIAN_POINT('',(-0.585,-0.625,1.1)); +#10465 = VECTOR('',#10466,1.); +#10466 = DIRECTION('',(1.,0.,0.)); +#10467 = ORIENTED_EDGE('',*,*,#10468,.T.); +#10468 = EDGE_CURVE('',#10461,#10469,#10471,.T.); +#10469 = VERTEX_POINT('',#10470); +#10470 = CARTESIAN_POINT('',(0.65,-0.625,0.465)); +#10471 = LINE('',#10472,#10473); +#10472 = CARTESIAN_POINT('',(0.585,-0.625,1.1)); +#10473 = VECTOR('',#10474,1.); +#10474 = DIRECTION('',(0.101830105936,0.,-0.994801804142)); +#10475 = ORIENTED_EDGE('',*,*,#10476,.T.); +#10476 = EDGE_CURVE('',#10469,#10451,#10477,.T.); +#10477 = LINE('',#10478,#10479); +#10478 = CARTESIAN_POINT('',(0.65,-0.625,0.465)); +#10479 = VECTOR('',#10480,1.); +#10480 = DIRECTION('',(-1.,0.,-4.270088556251E-17)); +#10481 = PLANE('',#10482); +#10482 = AXIS2_PLACEMENT_3D('',#10483,#10484,#10485); +#10483 = CARTESIAN_POINT('',(1.481626402817E-17,-0.625,0.771483451357)); +#10484 = DIRECTION('',(-5.57234551408E-33,1.,3.18580557984E-32)); +#10485 = DIRECTION('',(0.,-3.18580557984E-32,1.)); +#10486 = ADVANCED_FACE('',(#10487),#10528,.T.); +#10487 = FACE_BOUND('',#10488,.T.); +#10488 = EDGE_LOOP('',(#10489,#10499,#10507,#10513,#10514,#10522)); +#10489 = ORIENTED_EDGE('',*,*,#10490,.T.); +#10490 = EDGE_CURVE('',#10491,#10493,#10495,.T.); +#10491 = VERTEX_POINT('',#10492); +#10492 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10493 = VERTEX_POINT('',#10494); +#10494 = CARTESIAN_POINT('',(-0.65,0.46875,0.465)); +#10495 = LINE('',#10496,#10497); +#10496 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10497 = VECTOR('',#10498,1.); +#10498 = DIRECTION('',(0.,-1.,0.)); +#10499 = ORIENTED_EDGE('',*,*,#10500,.F.); +#10500 = EDGE_CURVE('',#10501,#10493,#10503,.T.); +#10501 = VERTEX_POINT('',#10502); +#10502 = CARTESIAN_POINT('',(-0.65,-0.46875,0.465)); +#10503 = LINE('',#10504,#10505); +#10504 = CARTESIAN_POINT('',(-0.65,-0.625,0.465)); +#10505 = VECTOR('',#10506,1.); +#10506 = DIRECTION('',(0.,1.,0.)); +#10507 = ORIENTED_EDGE('',*,*,#10508,.T.); +#10508 = EDGE_CURVE('',#10501,#10451,#10509,.T.); +#10509 = LINE('',#10510,#10511); +#10510 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10511 = VECTOR('',#10512,1.); +#10512 = DIRECTION('',(0.,-1.,0.)); +#10513 = ORIENTED_EDGE('',*,*,#10450,.T.); +#10514 = ORIENTED_EDGE('',*,*,#10515,.F.); +#10515 = EDGE_CURVE('',#10516,#10453,#10518,.T.); +#10516 = VERTEX_POINT('',#10517); +#10517 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10518 = LINE('',#10519,#10520); +#10519 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10520 = VECTOR('',#10521,1.); +#10521 = DIRECTION('',(0.,-1.,0.)); +#10522 = ORIENTED_EDGE('',*,*,#10523,.F.); +#10523 = EDGE_CURVE('',#10491,#10516,#10524,.T.); +#10524 = LINE('',#10525,#10526); +#10525 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10526 = VECTOR('',#10527,1.); +#10527 = DIRECTION('',(0.101830105936,0.,0.994801804142)); +#10528 = PLANE('',#10529); +#10529 = AXIS2_PLACEMENT_3D('',#10530,#10531,#10532); +#10530 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10531 = DIRECTION('',(-0.994801804142,0.,0.101830105936)); +#10532 = DIRECTION('',(0.101830105936,0.,0.994801804142)); +#10533 = ADVANCED_FACE('',(#10534),#10607,.F.); +#10534 = FACE_BOUND('',#10535,.F.); +#10535 = EDGE_LOOP('',(#10536,#10546,#10554,#10562,#10568,#10569,#10577, + #10585,#10593,#10601)); +#10536 = ORIENTED_EDGE('',*,*,#10537,.F.); +#10537 = EDGE_CURVE('',#10538,#10540,#10542,.T.); +#10538 = VERTEX_POINT('',#10539); +#10539 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10540 = VERTEX_POINT('',#10541); +#10541 = CARTESIAN_POINT('',(-0.9125,-0.625,3.5E-02)); +#10542 = LINE('',#10543,#10544); +#10543 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10544 = VECTOR('',#10545,1.); +#10545 = DIRECTION('',(1.,0.,0.)); +#10546 = ORIENTED_EDGE('',*,*,#10547,.T.); +#10547 = EDGE_CURVE('',#10538,#10548,#10550,.T.); +#10548 = VERTEX_POINT('',#10549); +#10549 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10550 = LINE('',#10551,#10552); +#10551 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10552 = VECTOR('',#10553,1.); +#10553 = DIRECTION('',(0.,0.,1.)); +#10554 = ORIENTED_EDGE('',*,*,#10555,.T.); +#10555 = EDGE_CURVE('',#10548,#10556,#10558,.T.); +#10556 = VERTEX_POINT('',#10557); +#10557 = CARTESIAN_POINT('',(-0.9125,-0.625,0.465)); +#10558 = LINE('',#10559,#10560); +#10559 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10560 = VECTOR('',#10561,1.); +#10561 = DIRECTION('',(1.,0.,0.)); +#10562 = ORIENTED_EDGE('',*,*,#10563,.T.); +#10563 = EDGE_CURVE('',#10556,#10451,#10564,.T.); +#10564 = LINE('',#10565,#10566); +#10565 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10566 = VECTOR('',#10567,1.); +#10567 = DIRECTION('',(1.,0.,0.)); +#10568 = ORIENTED_EDGE('',*,*,#10476,.F.); +#10569 = ORIENTED_EDGE('',*,*,#10570,.T.); +#10570 = EDGE_CURVE('',#10469,#10571,#10573,.T.); +#10571 = VERTEX_POINT('',#10572); +#10572 = CARTESIAN_POINT('',(0.9125,-0.625,0.465)); +#10573 = LINE('',#10574,#10575); +#10574 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10575 = VECTOR('',#10576,1.); +#10576 = DIRECTION('',(1.,0.,0.)); +#10577 = ORIENTED_EDGE('',*,*,#10578,.T.); +#10578 = EDGE_CURVE('',#10571,#10579,#10581,.T.); +#10579 = VERTEX_POINT('',#10580); +#10580 = CARTESIAN_POINT('',(0.965,-0.625,0.465)); +#10581 = LINE('',#10582,#10583); +#10582 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10583 = VECTOR('',#10584,1.); +#10584 = DIRECTION('',(1.,0.,0.)); +#10585 = ORIENTED_EDGE('',*,*,#10586,.F.); +#10586 = EDGE_CURVE('',#10587,#10579,#10589,.T.); +#10587 = VERTEX_POINT('',#10588); +#10588 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#10589 = LINE('',#10590,#10591); +#10590 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#10591 = VECTOR('',#10592,1.); +#10592 = DIRECTION('',(0.,0.,1.)); +#10593 = ORIENTED_EDGE('',*,*,#10594,.F.); +#10594 = EDGE_CURVE('',#10595,#10587,#10597,.T.); +#10595 = VERTEX_POINT('',#10596); +#10596 = CARTESIAN_POINT('',(0.9125,-0.625,3.5E-02)); +#10597 = LINE('',#10598,#10599); +#10598 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10599 = VECTOR('',#10600,1.); +#10600 = DIRECTION('',(1.,0.,0.)); +#10601 = ORIENTED_EDGE('',*,*,#10602,.F.); +#10602 = EDGE_CURVE('',#10540,#10595,#10603,.T.); +#10603 = LINE('',#10604,#10605); +#10604 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10605 = VECTOR('',#10606,1.); +#10606 = DIRECTION('',(1.,0.,0.)); +#10607 = PLANE('',#10608); +#10608 = AXIS2_PLACEMENT_3D('',#10609,#10610,#10611); +#10609 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10610 = DIRECTION('',(0.,1.,0.)); +#10611 = DIRECTION('',(0.,-0.,1.)); +#10612 = ADVANCED_FACE('',(#10613),#10631,.T.); +#10613 = FACE_BOUND('',#10614,.T.); +#10614 = EDGE_LOOP('',(#10615,#10616,#10617,#10625)); +#10615 = ORIENTED_EDGE('',*,*,#10515,.T.); +#10616 = ORIENTED_EDGE('',*,*,#10460,.T.); +#10617 = ORIENTED_EDGE('',*,*,#10618,.F.); +#10618 = EDGE_CURVE('',#10619,#10461,#10621,.T.); +#10619 = VERTEX_POINT('',#10620); +#10620 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10621 = LINE('',#10622,#10623); +#10622 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10623 = VECTOR('',#10624,1.); +#10624 = DIRECTION('',(0.,-1.,0.)); +#10625 = ORIENTED_EDGE('',*,*,#10626,.F.); +#10626 = EDGE_CURVE('',#10516,#10619,#10627,.T.); +#10627 = LINE('',#10628,#10629); +#10628 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10629 = VECTOR('',#10630,1.); +#10630 = DIRECTION('',(1.,0.,0.)); +#10631 = PLANE('',#10632); +#10632 = AXIS2_PLACEMENT_3D('',#10633,#10634,#10635); +#10633 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10634 = DIRECTION('',(0.,0.,1.)); +#10635 = DIRECTION('',(1.,0.,-0.)); +#10636 = ADVANCED_FACE('',(#10637),#10671,.T.); +#10637 = FACE_BOUND('',#10638,.T.); +#10638 = EDGE_LOOP('',(#10639,#10640,#10641,#10649,#10657,#10665)); +#10639 = ORIENTED_EDGE('',*,*,#10618,.T.); +#10640 = ORIENTED_EDGE('',*,*,#10468,.T.); +#10641 = ORIENTED_EDGE('',*,*,#10642,.F.); +#10642 = EDGE_CURVE('',#10643,#10469,#10645,.T.); +#10643 = VERTEX_POINT('',#10644); +#10644 = CARTESIAN_POINT('',(0.65,-0.46875,0.465)); +#10645 = LINE('',#10646,#10647); +#10646 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10647 = VECTOR('',#10648,1.); +#10648 = DIRECTION('',(0.,-1.,0.)); +#10649 = ORIENTED_EDGE('',*,*,#10650,.F.); +#10650 = EDGE_CURVE('',#10651,#10643,#10653,.T.); +#10651 = VERTEX_POINT('',#10652); +#10652 = CARTESIAN_POINT('',(0.65,0.46875,0.465)); +#10653 = LINE('',#10654,#10655); +#10654 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10655 = VECTOR('',#10656,1.); +#10656 = DIRECTION('',(0.,-1.,0.)); +#10657 = ORIENTED_EDGE('',*,*,#10658,.F.); +#10658 = EDGE_CURVE('',#10659,#10651,#10661,.T.); +#10659 = VERTEX_POINT('',#10660); +#10660 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10661 = LINE('',#10662,#10663); +#10662 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10663 = VECTOR('',#10664,1.); +#10664 = DIRECTION('',(0.,-1.,0.)); +#10665 = ORIENTED_EDGE('',*,*,#10666,.F.); +#10666 = EDGE_CURVE('',#10619,#10659,#10667,.T.); +#10667 = LINE('',#10668,#10669); +#10668 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10669 = VECTOR('',#10670,1.); +#10670 = DIRECTION('',(0.101830105936,0.,-0.994801804142)); +#10671 = PLANE('',#10672); +#10672 = AXIS2_PLACEMENT_3D('',#10673,#10674,#10675); +#10673 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10674 = DIRECTION('',(0.994801804142,0.,0.101830105936)); +#10675 = DIRECTION('',(0.101830105936,0.,-0.994801804142)); +#10676 = ADVANCED_FACE('',(#10677),#10702,.T.); +#10677 = FACE_BOUND('',#10678,.T.); +#10678 = EDGE_LOOP('',(#10679,#10687,#10695,#10701)); +#10679 = ORIENTED_EDGE('',*,*,#10680,.F.); +#10680 = EDGE_CURVE('',#10681,#10491,#10683,.T.); +#10681 = VERTEX_POINT('',#10682); +#10682 = CARTESIAN_POINT('',(-0.9125,0.625,0.465)); +#10683 = LINE('',#10684,#10685); +#10684 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#10685 = VECTOR('',#10686,1.); +#10686 = DIRECTION('',(1.,0.,0.)); +#10687 = ORIENTED_EDGE('',*,*,#10688,.F.); +#10688 = EDGE_CURVE('',#10689,#10681,#10691,.T.); +#10689 = VERTEX_POINT('',#10690); +#10690 = CARTESIAN_POINT('',(-0.9125,0.46875,0.465)); +#10691 = LINE('',#10692,#10693); +#10692 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,0.465)); +#10693 = VECTOR('',#10694,1.); +#10694 = DIRECTION('',(0.,1.,0.)); +#10695 = ORIENTED_EDGE('',*,*,#10696,.F.); +#10696 = EDGE_CURVE('',#10493,#10689,#10697,.T.); +#10697 = LINE('',#10698,#10699); +#10698 = CARTESIAN_POINT('',(-0.93875,0.46875,0.465)); +#10699 = VECTOR('',#10700,1.); +#10700 = DIRECTION('',(-1.,0.,0.)); +#10701 = ORIENTED_EDGE('',*,*,#10490,.F.); +#10702 = PLANE('',#10703); +#10703 = AXIS2_PLACEMENT_3D('',#10704,#10705,#10706); +#10704 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10705 = DIRECTION('',(0.,0.,1.)); +#10706 = DIRECTION('',(1.,0.,-0.)); +#10707 = ADVANCED_FACE('',(#10708),#10719,.T.); +#10708 = FACE_BOUND('',#10709,.T.); +#10709 = EDGE_LOOP('',(#10710,#10711,#10712,#10713)); +#10710 = ORIENTED_EDGE('',*,*,#10523,.T.); +#10711 = ORIENTED_EDGE('',*,*,#10626,.T.); +#10712 = ORIENTED_EDGE('',*,*,#10666,.T.); +#10713 = ORIENTED_EDGE('',*,*,#10714,.T.); +#10714 = EDGE_CURVE('',#10659,#10491,#10715,.T.); +#10715 = LINE('',#10716,#10717); +#10716 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10717 = VECTOR('',#10718,1.); +#10718 = DIRECTION('',(-1.,0.,-4.270088556251E-17)); +#10719 = PLANE('',#10720); +#10720 = AXIS2_PLACEMENT_3D('',#10721,#10722,#10723); +#10721 = CARTESIAN_POINT('',(1.481626402817E-17,0.625,0.771483451357)); +#10722 = DIRECTION('',(-5.57234551408E-33,1.,3.18580557984E-32)); +#10723 = DIRECTION('',(0.,-3.18580557984E-32,1.)); +#10724 = ADVANCED_FACE('',(#10725),#10752,.T.); +#10725 = FACE_BOUND('',#10726,.T.); +#10726 = EDGE_LOOP('',(#10727,#10736,#10744,#10751)); +#10727 = ORIENTED_EDGE('',*,*,#10728,.F.); +#10728 = EDGE_CURVE('',#10729,#10493,#10731,.T.); +#10729 = VERTEX_POINT('',#10730); +#10730 = CARTESIAN_POINT('',(-0.685,0.46875,0.5)); +#10731 = CIRCLE('',#10732,3.5E-02); +#10732 = AXIS2_PLACEMENT_3D('',#10733,#10734,#10735); +#10733 = CARTESIAN_POINT('',(-0.685,0.46875,0.465)); +#10734 = DIRECTION('',(-0.,1.,0.)); +#10735 = DIRECTION('',(1.,0.,0.)); +#10736 = ORIENTED_EDGE('',*,*,#10737,.F.); +#10737 = EDGE_CURVE('',#10738,#10729,#10740,.T.); +#10738 = VERTEX_POINT('',#10739); +#10739 = CARTESIAN_POINT('',(-0.685,-0.46875,0.5)); +#10740 = LINE('',#10741,#10742); +#10741 = CARTESIAN_POINT('',(-0.685,-0.625,0.5)); +#10742 = VECTOR('',#10743,1.); +#10743 = DIRECTION('',(0.,1.,0.)); +#10744 = ORIENTED_EDGE('',*,*,#10745,.T.); +#10745 = EDGE_CURVE('',#10738,#10501,#10746,.T.); +#10746 = CIRCLE('',#10747,3.5E-02); +#10747 = AXIS2_PLACEMENT_3D('',#10748,#10749,#10750); +#10748 = CARTESIAN_POINT('',(-0.685,-0.46875,0.465)); +#10749 = DIRECTION('',(-0.,1.,0.)); +#10750 = DIRECTION('',(1.,0.,0.)); +#10751 = ORIENTED_EDGE('',*,*,#10500,.T.); +#10752 = CYLINDRICAL_SURFACE('',#10753,3.5E-02); +#10753 = AXIS2_PLACEMENT_3D('',#10754,#10755,#10756); +#10754 = CARTESIAN_POINT('',(-0.685,-0.625,0.465)); +#10755 = DIRECTION('',(0.,1.,0.)); +#10756 = DIRECTION('',(1.,0.,0.)); +#10757 = ADVANCED_FACE('',(#10758),#10776,.T.); +#10758 = FACE_BOUND('',#10759,.T.); +#10759 = EDGE_LOOP('',(#10760,#10768,#10769,#10770)); +#10760 = ORIENTED_EDGE('',*,*,#10761,.F.); +#10761 = EDGE_CURVE('',#10556,#10762,#10764,.T.); +#10762 = VERTEX_POINT('',#10763); +#10763 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.465)); +#10764 = LINE('',#10765,#10766); +#10765 = CARTESIAN_POINT('',(-0.9125,-0.546875,0.465)); +#10766 = VECTOR('',#10767,1.); +#10767 = DIRECTION('',(0.,1.,0.)); +#10768 = ORIENTED_EDGE('',*,*,#10563,.T.); +#10769 = ORIENTED_EDGE('',*,*,#10508,.F.); +#10770 = ORIENTED_EDGE('',*,*,#10771,.F.); +#10771 = EDGE_CURVE('',#10762,#10501,#10772,.T.); +#10772 = LINE('',#10773,#10774); +#10773 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,0.465)); +#10774 = VECTOR('',#10775,1.); +#10775 = DIRECTION('',(1.,0.,0.)); +#10776 = PLANE('',#10777); +#10777 = AXIS2_PLACEMENT_3D('',#10778,#10779,#10780); +#10778 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10779 = DIRECTION('',(0.,0.,1.)); +#10780 = DIRECTION('',(1.,0.,-0.)); +#10781 = ADVANCED_FACE('',(#10782),#10843,.F.); +#10782 = FACE_BOUND('',#10783,.F.); +#10783 = EDGE_LOOP('',(#10784,#10794,#10803,#10811,#10820,#10828,#10834, + #10835,#10836,#10837)); +#10784 = ORIENTED_EDGE('',*,*,#10785,.F.); +#10785 = EDGE_CURVE('',#10786,#10788,#10790,.T.); +#10786 = VERTEX_POINT('',#10787); +#10787 = CARTESIAN_POINT('',(-0.965,-0.625,-6.938893903907E-18)); +#10788 = VERTEX_POINT('',#10789); +#10789 = CARTESIAN_POINT('',(-0.9125,-0.625,0.)); +#10790 = LINE('',#10791,#10792); +#10791 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#10792 = VECTOR('',#10793,1.); +#10793 = DIRECTION('',(1.,0.,0.)); +#10794 = ORIENTED_EDGE('',*,*,#10795,.F.); +#10795 = EDGE_CURVE('',#10796,#10786,#10798,.T.); +#10796 = VERTEX_POINT('',#10797); +#10797 = CARTESIAN_POINT('',(-1.,-0.625,3.5E-02)); +#10798 = CIRCLE('',#10799,3.5E-02); +#10799 = AXIS2_PLACEMENT_3D('',#10800,#10801,#10802); +#10800 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10801 = DIRECTION('',(0.,-1.,0.)); +#10802 = DIRECTION('',(0.,0.,1.)); +#10803 = ORIENTED_EDGE('',*,*,#10804,.T.); +#10804 = EDGE_CURVE('',#10796,#10805,#10807,.T.); +#10805 = VERTEX_POINT('',#10806); +#10806 = CARTESIAN_POINT('',(-1.,-0.625,0.465)); +#10807 = LINE('',#10808,#10809); +#10808 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#10809 = VECTOR('',#10810,1.); +#10810 = DIRECTION('',(0.,0.,1.)); +#10811 = ORIENTED_EDGE('',*,*,#10812,.T.); +#10812 = EDGE_CURVE('',#10805,#10813,#10815,.T.); +#10813 = VERTEX_POINT('',#10814); +#10814 = CARTESIAN_POINT('',(-0.965,-0.625,0.5)); +#10815 = CIRCLE('',#10816,3.5E-02); +#10816 = AXIS2_PLACEMENT_3D('',#10817,#10818,#10819); +#10817 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10818 = DIRECTION('',(0.,1.,0.)); +#10819 = DIRECTION('',(0.,-0.,1.)); +#10820 = ORIENTED_EDGE('',*,*,#10821,.T.); +#10821 = EDGE_CURVE('',#10813,#10822,#10824,.T.); +#10822 = VERTEX_POINT('',#10823); +#10823 = CARTESIAN_POINT('',(-0.9125,-0.625,0.5)); +#10824 = LINE('',#10825,#10826); +#10825 = CARTESIAN_POINT('',(-1.,-0.625,0.5)); +#10826 = VECTOR('',#10827,1.); +#10827 = DIRECTION('',(1.,0.,0.)); +#10828 = ORIENTED_EDGE('',*,*,#10829,.F.); +#10829 = EDGE_CURVE('',#10556,#10822,#10830,.T.); +#10830 = LINE('',#10831,#10832); +#10831 = CARTESIAN_POINT('',(-0.9125,-0.625,0.375)); +#10832 = VECTOR('',#10833,1.); +#10833 = DIRECTION('',(0.,0.,1.)); +#10834 = ORIENTED_EDGE('',*,*,#10555,.F.); +#10835 = ORIENTED_EDGE('',*,*,#10547,.F.); +#10836 = ORIENTED_EDGE('',*,*,#10537,.T.); +#10837 = ORIENTED_EDGE('',*,*,#10838,.F.); +#10838 = EDGE_CURVE('',#10788,#10540,#10839,.T.); +#10839 = LINE('',#10840,#10841); +#10840 = CARTESIAN_POINT('',(-0.9125,-0.625,0.375)); +#10841 = VECTOR('',#10842,1.); +#10842 = DIRECTION('',(0.,0.,1.)); +#10843 = PLANE('',#10844); +#10844 = AXIS2_PLACEMENT_3D('',#10845,#10846,#10847); +#10845 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#10846 = DIRECTION('',(0.,1.,0.)); +#10847 = DIRECTION('',(0.,-0.,1.)); +#10848 = ADVANCED_FACE('',(#10849,#10938),#10964,.F.); +#10849 = FACE_BOUND('',#10850,.F.); +#10850 = EDGE_LOOP('',(#10851,#10859,#10860,#10868,#10876,#10884,#10892, + #10900,#10908,#10916,#10924,#10932)); +#10851 = ORIENTED_EDGE('',*,*,#10852,.F.); +#10852 = EDGE_CURVE('',#10540,#10853,#10855,.T.); +#10853 = VERTEX_POINT('',#10854); +#10854 = CARTESIAN_POINT('',(-0.9125,-0.46875,3.5E-02)); +#10855 = LINE('',#10856,#10857); +#10856 = CARTESIAN_POINT('',(-0.9125,-0.546875,3.5E-02)); +#10857 = VECTOR('',#10858,1.); +#10858 = DIRECTION('',(0.,1.,0.)); +#10859 = ORIENTED_EDGE('',*,*,#10602,.T.); +#10860 = ORIENTED_EDGE('',*,*,#10861,.F.); +#10861 = EDGE_CURVE('',#10862,#10595,#10864,.T.); +#10862 = VERTEX_POINT('',#10863); +#10863 = CARTESIAN_POINT('',(0.9125,-0.46875,3.5E-02)); +#10864 = LINE('',#10865,#10866); +#10865 = CARTESIAN_POINT('',(0.9125,-0.703125,3.5E-02)); +#10866 = VECTOR('',#10867,1.); +#10867 = DIRECTION('',(0.,-1.,0.)); +#10868 = ORIENTED_EDGE('',*,*,#10869,.F.); +#10869 = EDGE_CURVE('',#10870,#10862,#10872,.T.); +#10870 = VERTEX_POINT('',#10871); +#10871 = CARTESIAN_POINT('',(0.65,-0.46875,3.5E-02)); +#10872 = LINE('',#10873,#10874); +#10873 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,3.5E-02)); +#10874 = VECTOR('',#10875,1.); +#10875 = DIRECTION('',(1.,0.,0.)); +#10876 = ORIENTED_EDGE('',*,*,#10877,.T.); +#10877 = EDGE_CURVE('',#10870,#10878,#10880,.T.); +#10878 = VERTEX_POINT('',#10879); +#10879 = CARTESIAN_POINT('',(0.65,0.46875,3.5E-02)); +#10880 = LINE('',#10881,#10882); +#10881 = CARTESIAN_POINT('',(0.65,-0.625,3.5E-02)); +#10882 = VECTOR('',#10883,1.); +#10883 = DIRECTION('',(0.,1.,0.)); +#10884 = ORIENTED_EDGE('',*,*,#10885,.F.); +#10885 = EDGE_CURVE('',#10886,#10878,#10888,.T.); +#10886 = VERTEX_POINT('',#10887); +#10887 = CARTESIAN_POINT('',(0.9125,0.46875,3.5E-02)); +#10888 = LINE('',#10889,#10890); +#10889 = CARTESIAN_POINT('',(-0.93875,0.46875,3.5E-02)); +#10890 = VECTOR('',#10891,1.); +#10891 = DIRECTION('',(-1.,0.,0.)); +#10892 = ORIENTED_EDGE('',*,*,#10893,.F.); +#10893 = EDGE_CURVE('',#10894,#10886,#10896,.T.); +#10894 = VERTEX_POINT('',#10895); +#10895 = CARTESIAN_POINT('',(0.9125,0.625,3.5E-02)); +#10896 = LINE('',#10897,#10898); +#10897 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,3.5E-02)); +#10898 = VECTOR('',#10899,1.); +#10899 = DIRECTION('',(0.,-1.,0.)); +#10900 = ORIENTED_EDGE('',*,*,#10901,.F.); +#10901 = EDGE_CURVE('',#10902,#10894,#10904,.T.); +#10902 = VERTEX_POINT('',#10903); +#10903 = CARTESIAN_POINT('',(-0.9125,0.625,3.5E-02)); +#10904 = LINE('',#10905,#10906); +#10905 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#10906 = VECTOR('',#10907,1.); +#10907 = DIRECTION('',(1.,0.,0.)); +#10908 = ORIENTED_EDGE('',*,*,#10909,.F.); +#10909 = EDGE_CURVE('',#10910,#10902,#10912,.T.); +#10910 = VERTEX_POINT('',#10911); +#10911 = CARTESIAN_POINT('',(-0.9125,0.46875,3.5E-02)); +#10912 = LINE('',#10913,#10914); +#10913 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,3.5E-02)); +#10914 = VECTOR('',#10915,1.); +#10915 = DIRECTION('',(0.,1.,0.)); +#10916 = ORIENTED_EDGE('',*,*,#10917,.F.); +#10917 = EDGE_CURVE('',#10918,#10910,#10920,.T.); +#10918 = VERTEX_POINT('',#10919); +#10919 = CARTESIAN_POINT('',(-0.65,0.46875,3.5E-02)); +#10920 = LINE('',#10921,#10922); +#10921 = CARTESIAN_POINT('',(-0.93875,0.46875,3.5E-02)); +#10922 = VECTOR('',#10923,1.); +#10923 = DIRECTION('',(-1.,0.,0.)); +#10924 = ORIENTED_EDGE('',*,*,#10925,.F.); +#10925 = EDGE_CURVE('',#10926,#10918,#10928,.T.); +#10926 = VERTEX_POINT('',#10927); +#10927 = CARTESIAN_POINT('',(-0.65,-0.46875,3.5E-02)); +#10928 = LINE('',#10929,#10930); +#10929 = CARTESIAN_POINT('',(-0.65,-0.625,3.5E-02)); +#10930 = VECTOR('',#10931,1.); +#10931 = DIRECTION('',(0.,1.,0.)); +#10932 = ORIENTED_EDGE('',*,*,#10933,.F.); +#10933 = EDGE_CURVE('',#10853,#10926,#10934,.T.); +#10934 = LINE('',#10935,#10936); +#10935 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,3.5E-02)); +#10936 = VECTOR('',#10937,1.); +#10937 = DIRECTION('',(1.,0.,0.)); +#10938 = FACE_BOUND('',#10939,.F.); +#10939 = EDGE_LOOP('',(#10940,#10950,#10958)); +#10940 = ORIENTED_EDGE('',*,*,#10941,.T.); +#10941 = EDGE_CURVE('',#10942,#10944,#10946,.T.); +#10942 = VERTEX_POINT('',#10943); +#10943 = CARTESIAN_POINT('',(0.433012701892,0.5,3.5E-02)); +#10944 = VERTEX_POINT('',#10945); +#10945 = CARTESIAN_POINT('',(0.433012701892,-0.5,3.5E-02)); +#10946 = LINE('',#10947,#10948); +#10947 = CARTESIAN_POINT('',(0.433012701892,0.5,3.5E-02)); +#10948 = VECTOR('',#10949,1.); +#10949 = DIRECTION('',(0.,-1.,0.)); +#10950 = ORIENTED_EDGE('',*,*,#10951,.T.); +#10951 = EDGE_CURVE('',#10944,#10952,#10954,.T.); +#10952 = VERTEX_POINT('',#10953); +#10953 = CARTESIAN_POINT('',(-0.433012701892,0.,3.5E-02)); +#10954 = LINE('',#10955,#10956); +#10955 = CARTESIAN_POINT('',(0.433012701892,-0.5,3.5E-02)); +#10956 = VECTOR('',#10957,1.); +#10957 = DIRECTION('',(-0.866025403784,0.5,0.)); +#10958 = ORIENTED_EDGE('',*,*,#10959,.T.); +#10959 = EDGE_CURVE('',#10952,#10942,#10960,.T.); +#10960 = LINE('',#10961,#10962); +#10961 = CARTESIAN_POINT('',(-0.433012701892,0.,3.5E-02)); +#10962 = VECTOR('',#10963,1.); +#10963 = DIRECTION('',(0.866025403784,0.5,0.)); +#10964 = PLANE('',#10965); +#10965 = AXIS2_PLACEMENT_3D('',#10966,#10967,#10968); +#10966 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10967 = DIRECTION('',(0.,0.,1.)); +#10968 = DIRECTION('',(1.,0.,-0.)); +#10969 = ADVANCED_FACE('',(#10970),#11031,.F.); +#10970 = FACE_BOUND('',#10971,.F.); +#10971 = EDGE_LOOP('',(#10972,#10982,#10988,#10989,#10990,#10991,#10999, + #11007,#11016,#11024)); +#10972 = ORIENTED_EDGE('',*,*,#10973,.F.); +#10973 = EDGE_CURVE('',#10974,#10976,#10978,.T.); +#10974 = VERTEX_POINT('',#10975); +#10975 = CARTESIAN_POINT('',(0.9125,-0.625,0.)); +#10976 = VERTEX_POINT('',#10977); +#10977 = CARTESIAN_POINT('',(0.965,-0.625,-6.938893903907E-18)); +#10978 = LINE('',#10979,#10980); +#10979 = CARTESIAN_POINT('',(0.65,-0.625,0.)); +#10980 = VECTOR('',#10981,1.); +#10981 = DIRECTION('',(1.,0.,0.)); +#10982 = ORIENTED_EDGE('',*,*,#10983,.F.); +#10983 = EDGE_CURVE('',#10595,#10974,#10984,.T.); +#10984 = LINE('',#10985,#10986); +#10985 = CARTESIAN_POINT('',(0.9125,-0.625,0.375)); +#10986 = VECTOR('',#10987,1.); +#10987 = DIRECTION('',(0.,0.,-1.)); +#10988 = ORIENTED_EDGE('',*,*,#10594,.T.); +#10989 = ORIENTED_EDGE('',*,*,#10586,.T.); +#10990 = ORIENTED_EDGE('',*,*,#10578,.F.); +#10991 = ORIENTED_EDGE('',*,*,#10992,.F.); +#10992 = EDGE_CURVE('',#10993,#10571,#10995,.T.); +#10993 = VERTEX_POINT('',#10994); +#10994 = CARTESIAN_POINT('',(0.9125,-0.625,0.5)); +#10995 = LINE('',#10996,#10997); +#10996 = CARTESIAN_POINT('',(0.9125,-0.625,0.375)); +#10997 = VECTOR('',#10998,1.); +#10998 = DIRECTION('',(0.,0.,-1.)); +#10999 = ORIENTED_EDGE('',*,*,#11000,.T.); +#11000 = EDGE_CURVE('',#10993,#11001,#11003,.T.); +#11001 = VERTEX_POINT('',#11002); +#11002 = CARTESIAN_POINT('',(0.965,-0.625,0.5)); +#11003 = LINE('',#11004,#11005); +#11004 = CARTESIAN_POINT('',(0.65,-0.625,0.5)); +#11005 = VECTOR('',#11006,1.); +#11006 = DIRECTION('',(1.,0.,0.)); +#11007 = ORIENTED_EDGE('',*,*,#11008,.F.); +#11008 = EDGE_CURVE('',#11009,#11001,#11011,.T.); +#11009 = VERTEX_POINT('',#11010); +#11010 = CARTESIAN_POINT('',(1.,-0.625,0.465)); +#11011 = CIRCLE('',#11012,3.5E-02); +#11012 = AXIS2_PLACEMENT_3D('',#11013,#11014,#11015); +#11013 = CARTESIAN_POINT('',(0.965,-0.625,0.465)); +#11014 = DIRECTION('',(0.,-1.,0.)); +#11015 = DIRECTION('',(0.,0.,1.)); +#11016 = ORIENTED_EDGE('',*,*,#11017,.F.); +#11017 = EDGE_CURVE('',#11018,#11009,#11020,.T.); +#11018 = VERTEX_POINT('',#11019); +#11019 = CARTESIAN_POINT('',(1.,-0.625,3.5E-02)); +#11020 = LINE('',#11021,#11022); +#11021 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#11022 = VECTOR('',#11023,1.); +#11023 = DIRECTION('',(0.,0.,1.)); +#11024 = ORIENTED_EDGE('',*,*,#11025,.T.); +#11025 = EDGE_CURVE('',#11018,#10976,#11026,.T.); +#11026 = CIRCLE('',#11027,3.5E-02); +#11027 = AXIS2_PLACEMENT_3D('',#11028,#11029,#11030); +#11028 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#11029 = DIRECTION('',(0.,1.,0.)); +#11030 = DIRECTION('',(0.,-0.,1.)); +#11031 = PLANE('',#11032); +#11032 = AXIS2_PLACEMENT_3D('',#11033,#11034,#11035); +#11033 = CARTESIAN_POINT('',(0.65,-0.625,0.)); +#11034 = DIRECTION('',(0.,1.,0.)); +#11035 = DIRECTION('',(0.,-0.,1.)); +#11036 = ADVANCED_FACE('',(#11037),#11055,.T.); +#11037 = FACE_BOUND('',#11038,.T.); +#11038 = EDGE_LOOP('',(#11039,#11047,#11048,#11049)); +#11039 = ORIENTED_EDGE('',*,*,#11040,.F.); +#11040 = EDGE_CURVE('',#10643,#11041,#11043,.T.); +#11041 = VERTEX_POINT('',#11042); +#11042 = CARTESIAN_POINT('',(0.9125,-0.46875,0.465)); +#11043 = LINE('',#11044,#11045); +#11044 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,0.465)); +#11045 = VECTOR('',#11046,1.); +#11046 = DIRECTION('',(1.,0.,0.)); +#11047 = ORIENTED_EDGE('',*,*,#10642,.T.); +#11048 = ORIENTED_EDGE('',*,*,#10570,.T.); +#11049 = ORIENTED_EDGE('',*,*,#11050,.F.); +#11050 = EDGE_CURVE('',#11041,#10571,#11051,.T.); +#11051 = LINE('',#11052,#11053); +#11052 = CARTESIAN_POINT('',(0.9125,-0.703125,0.465)); +#11053 = VECTOR('',#11054,1.); +#11054 = DIRECTION('',(0.,-1.,0.)); +#11055 = PLANE('',#11056); +#11056 = AXIS2_PLACEMENT_3D('',#11057,#11058,#11059); +#11057 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#11058 = DIRECTION('',(0.,0.,1.)); +#11059 = DIRECTION('',(1.,0.,-0.)); +#11060 = ADVANCED_FACE('',(#11061),#11086,.T.); +#11061 = FACE_BOUND('',#11062,.T.); +#11062 = EDGE_LOOP('',(#11063,#11071,#11072,#11080)); +#11063 = ORIENTED_EDGE('',*,*,#11064,.F.); +#11064 = EDGE_CURVE('',#10659,#11065,#11067,.T.); +#11065 = VERTEX_POINT('',#11066); +#11066 = CARTESIAN_POINT('',(0.9125,0.625,0.465)); +#11067 = LINE('',#11068,#11069); +#11068 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11069 = VECTOR('',#11070,1.); +#11070 = DIRECTION('',(1.,0.,0.)); +#11071 = ORIENTED_EDGE('',*,*,#10658,.T.); +#11072 = ORIENTED_EDGE('',*,*,#11073,.F.); +#11073 = EDGE_CURVE('',#11074,#10651,#11076,.T.); +#11074 = VERTEX_POINT('',#11075); +#11075 = CARTESIAN_POINT('',(0.9125,0.46875,0.465)); +#11076 = LINE('',#11077,#11078); +#11077 = CARTESIAN_POINT('',(-0.93875,0.46875,0.465)); +#11078 = VECTOR('',#11079,1.); +#11079 = DIRECTION('',(-1.,0.,0.)); +#11080 = ORIENTED_EDGE('',*,*,#11081,.F.); +#11081 = EDGE_CURVE('',#11065,#11074,#11082,.T.); +#11082 = LINE('',#11083,#11084); +#11083 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,0.465)); +#11084 = VECTOR('',#11085,1.); +#11085 = DIRECTION('',(0.,-1.,0.)); +#11086 = PLANE('',#11087); +#11087 = AXIS2_PLACEMENT_3D('',#11088,#11089,#11090); +#11088 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#11089 = DIRECTION('',(0.,0.,1.)); +#11090 = DIRECTION('',(1.,0.,-0.)); +#11091 = ADVANCED_FACE('',(#11092),#11119,.T.); +#11092 = FACE_BOUND('',#11093,.T.); +#11093 = EDGE_LOOP('',(#11094,#11095,#11104,#11112)); +#11094 = ORIENTED_EDGE('',*,*,#10650,.T.); +#11095 = ORIENTED_EDGE('',*,*,#11096,.T.); +#11096 = EDGE_CURVE('',#10643,#11097,#11099,.T.); +#11097 = VERTEX_POINT('',#11098); +#11098 = CARTESIAN_POINT('',(0.685,-0.46875,0.5)); +#11099 = CIRCLE('',#11100,3.5E-02); +#11100 = AXIS2_PLACEMENT_3D('',#11101,#11102,#11103); +#11101 = CARTESIAN_POINT('',(0.685,-0.46875,0.465)); +#11102 = DIRECTION('',(0.,1.,-0.)); +#11103 = DIRECTION('',(-1.,0.,0.)); +#11104 = ORIENTED_EDGE('',*,*,#11105,.T.); +#11105 = EDGE_CURVE('',#11097,#11106,#11108,.T.); +#11106 = VERTEX_POINT('',#11107); +#11107 = CARTESIAN_POINT('',(0.685,0.46875,0.5)); +#11108 = LINE('',#11109,#11110); +#11109 = CARTESIAN_POINT('',(0.685,-0.625,0.5)); +#11110 = VECTOR('',#11111,1.); +#11111 = DIRECTION('',(0.,1.,0.)); +#11112 = ORIENTED_EDGE('',*,*,#11113,.F.); +#11113 = EDGE_CURVE('',#10651,#11106,#11114,.T.); +#11114 = CIRCLE('',#11115,3.5E-02); +#11115 = AXIS2_PLACEMENT_3D('',#11116,#11117,#11118); +#11116 = CARTESIAN_POINT('',(0.685,0.46875,0.465)); +#11117 = DIRECTION('',(0.,1.,-0.)); +#11118 = DIRECTION('',(-1.,0.,0.)); +#11119 = CYLINDRICAL_SURFACE('',#11120,3.5E-02); +#11120 = AXIS2_PLACEMENT_3D('',#11121,#11122,#11123); +#11121 = CARTESIAN_POINT('',(0.685,-0.625,0.465)); +#11122 = DIRECTION('',(0.,1.,0.)); +#11123 = DIRECTION('',(-1.,0.,0.)); +#11124 = ADVANCED_FACE('',(#11125),#11175,.T.); +#11125 = FACE_BOUND('',#11126,.T.); +#11126 = EDGE_LOOP('',(#11127,#11135,#11143,#11149,#11150,#11151,#11152, + #11160,#11168,#11174)); +#11127 = ORIENTED_EDGE('',*,*,#11128,.F.); +#11128 = EDGE_CURVE('',#11129,#10902,#11131,.T.); +#11129 = VERTEX_POINT('',#11130); +#11130 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11131 = LINE('',#11132,#11133); +#11132 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11133 = VECTOR('',#11134,1.); +#11134 = DIRECTION('',(1.,0.,0.)); +#11135 = ORIENTED_EDGE('',*,*,#11136,.T.); +#11136 = EDGE_CURVE('',#11129,#11137,#11139,.T.); +#11137 = VERTEX_POINT('',#11138); +#11138 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11139 = LINE('',#11140,#11141); +#11140 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11141 = VECTOR('',#11142,1.); +#11142 = DIRECTION('',(0.,0.,1.)); +#11143 = ORIENTED_EDGE('',*,*,#11144,.T.); +#11144 = EDGE_CURVE('',#11137,#10681,#11145,.T.); +#11145 = LINE('',#11146,#11147); +#11146 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11147 = VECTOR('',#11148,1.); +#11148 = DIRECTION('',(1.,0.,0.)); +#11149 = ORIENTED_EDGE('',*,*,#10680,.T.); +#11150 = ORIENTED_EDGE('',*,*,#10714,.F.); +#11151 = ORIENTED_EDGE('',*,*,#11064,.T.); +#11152 = ORIENTED_EDGE('',*,*,#11153,.T.); +#11153 = EDGE_CURVE('',#11065,#11154,#11156,.T.); +#11154 = VERTEX_POINT('',#11155); +#11155 = CARTESIAN_POINT('',(0.965,0.625,0.465)); +#11156 = LINE('',#11157,#11158); +#11157 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11158 = VECTOR('',#11159,1.); +#11159 = DIRECTION('',(1.,0.,0.)); +#11160 = ORIENTED_EDGE('',*,*,#11161,.F.); +#11161 = EDGE_CURVE('',#11162,#11154,#11164,.T.); +#11162 = VERTEX_POINT('',#11163); +#11163 = CARTESIAN_POINT('',(0.965,0.625,3.5E-02)); +#11164 = LINE('',#11165,#11166); +#11165 = CARTESIAN_POINT('',(0.965,0.625,3.5E-02)); +#11166 = VECTOR('',#11167,1.); +#11167 = DIRECTION('',(0.,0.,1.)); +#11168 = ORIENTED_EDGE('',*,*,#11169,.F.); +#11169 = EDGE_CURVE('',#10894,#11162,#11170,.T.); +#11170 = LINE('',#11171,#11172); +#11171 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11172 = VECTOR('',#11173,1.); +#11173 = DIRECTION('',(1.,0.,0.)); +#11174 = ORIENTED_EDGE('',*,*,#10901,.F.); +#11175 = PLANE('',#11176); +#11176 = AXIS2_PLACEMENT_3D('',#11177,#11178,#11179); +#11177 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11178 = DIRECTION('',(0.,1.,0.)); +#11179 = DIRECTION('',(0.,-0.,1.)); +#11180 = ADVANCED_FACE('',(#11181),#11199,.F.); +#11181 = FACE_BOUND('',#11182,.F.); +#11182 = EDGE_LOOP('',(#11183,#11191,#11197,#11198)); +#11183 = ORIENTED_EDGE('',*,*,#11184,.F.); +#11184 = EDGE_CURVE('',#11185,#10729,#11187,.T.); +#11185 = VERTEX_POINT('',#11186); +#11186 = CARTESIAN_POINT('',(-0.9125,0.46875,0.5)); +#11187 = LINE('',#11188,#11189); +#11188 = CARTESIAN_POINT('',(-0.95625,0.46875,0.5)); +#11189 = VECTOR('',#11190,1.); +#11190 = DIRECTION('',(1.,0.,0.)); +#11191 = ORIENTED_EDGE('',*,*,#11192,.T.); +#11192 = EDGE_CURVE('',#11185,#10689,#11193,.T.); +#11193 = LINE('',#11194,#11195); +#11194 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11195 = VECTOR('',#11196,1.); +#11196 = DIRECTION('',(-0.,-0.,-1.)); +#11197 = ORIENTED_EDGE('',*,*,#10696,.F.); +#11198 = ORIENTED_EDGE('',*,*,#10728,.F.); +#11199 = PLANE('',#11200); +#11200 = AXIS2_PLACEMENT_3D('',#11201,#11202,#11203); +#11201 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11202 = DIRECTION('',(0.,-1.,0.)); +#11203 = DIRECTION('',(1.,0.,0.)); +#11204 = ADVANCED_FACE('',(#11205),#11223,.F.); +#11205 = FACE_BOUND('',#11206,.F.); +#11206 = EDGE_LOOP('',(#11207,#11208,#11216,#11222)); +#11207 = ORIENTED_EDGE('',*,*,#11192,.F.); +#11208 = ORIENTED_EDGE('',*,*,#11209,.F.); +#11209 = EDGE_CURVE('',#11210,#11185,#11212,.T.); +#11210 = VERTEX_POINT('',#11211); +#11211 = CARTESIAN_POINT('',(-0.9125,0.625,0.5)); +#11212 = LINE('',#11213,#11214); +#11213 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,0.5)); +#11214 = VECTOR('',#11215,1.); +#11215 = DIRECTION('',(0.,-1.,0.)); +#11216 = ORIENTED_EDGE('',*,*,#11217,.F.); +#11217 = EDGE_CURVE('',#10681,#11210,#11218,.T.); +#11218 = LINE('',#11219,#11220); +#11219 = CARTESIAN_POINT('',(-0.9125,0.625,0.375)); +#11220 = VECTOR('',#11221,1.); +#11221 = DIRECTION('',(0.,0.,1.)); +#11222 = ORIENTED_EDGE('',*,*,#10688,.F.); +#11223 = PLANE('',#11224); +#11224 = AXIS2_PLACEMENT_3D('',#11225,#11226,#11227); +#11225 = CARTESIAN_POINT('',(-0.9125,0.78125,0.75)); +#11226 = DIRECTION('',(-1.,0.,0.)); +#11227 = DIRECTION('',(0.,-1.,0.)); +#11228 = ADVANCED_FACE('',(#11229),#11247,.F.); +#11229 = FACE_BOUND('',#11230,.F.); +#11230 = EDGE_LOOP('',(#11231,#11239,#11245,#11246)); +#11231 = ORIENTED_EDGE('',*,*,#11232,.F.); +#11232 = EDGE_CURVE('',#11233,#10762,#11235,.T.); +#11233 = VERTEX_POINT('',#11234); +#11234 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.5)); +#11235 = LINE('',#11236,#11237); +#11236 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11237 = VECTOR('',#11238,1.); +#11238 = DIRECTION('',(-0.,-0.,-1.)); +#11239 = ORIENTED_EDGE('',*,*,#11240,.F.); +#11240 = EDGE_CURVE('',#10738,#11233,#11241,.T.); +#11241 = LINE('',#11242,#11243); +#11242 = CARTESIAN_POINT('',(-4.375E-02,-0.46875,0.5)); +#11243 = VECTOR('',#11244,1.); +#11244 = DIRECTION('',(-1.,0.,0.)); +#11245 = ORIENTED_EDGE('',*,*,#10745,.T.); +#11246 = ORIENTED_EDGE('',*,*,#10771,.F.); +#11247 = PLANE('',#11248); +#11248 = AXIS2_PLACEMENT_3D('',#11249,#11250,#11251); +#11249 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11250 = DIRECTION('',(0.,1.,0.)); +#11251 = DIRECTION('',(-1.,0.,0.)); +#11252 = ADVANCED_FACE('',(#11253),#11280,.T.); +#11253 = FACE_BOUND('',#11254,.T.); +#11254 = EDGE_LOOP('',(#11255,#11263,#11269,#11270,#11276,#11277,#11278, + #11279)); +#11255 = ORIENTED_EDGE('',*,*,#11256,.F.); +#11256 = EDGE_CURVE('',#11257,#11210,#11259,.T.); +#11257 = VERTEX_POINT('',#11258); +#11258 = CARTESIAN_POINT('',(-0.965,0.625,0.5)); +#11259 = LINE('',#11260,#11261); +#11260 = CARTESIAN_POINT('',(-1.,0.625,0.5)); +#11261 = VECTOR('',#11262,1.); +#11262 = DIRECTION('',(1.,0.,0.)); +#11263 = ORIENTED_EDGE('',*,*,#11264,.F.); +#11264 = EDGE_CURVE('',#10813,#11257,#11265,.T.); +#11265 = LINE('',#11266,#11267); +#11266 = CARTESIAN_POINT('',(-0.965,-0.625,0.5)); +#11267 = VECTOR('',#11268,1.); +#11268 = DIRECTION('',(0.,1.,0.)); +#11269 = ORIENTED_EDGE('',*,*,#10821,.T.); +#11270 = ORIENTED_EDGE('',*,*,#11271,.F.); +#11271 = EDGE_CURVE('',#11233,#10822,#11272,.T.); +#11272 = LINE('',#11273,#11274); +#11273 = CARTESIAN_POINT('',(-0.9125,-0.546875,0.5)); +#11274 = VECTOR('',#11275,1.); +#11275 = DIRECTION('',(0.,-1.,0.)); +#11276 = ORIENTED_EDGE('',*,*,#11240,.F.); +#11277 = ORIENTED_EDGE('',*,*,#10737,.T.); +#11278 = ORIENTED_EDGE('',*,*,#11184,.F.); +#11279 = ORIENTED_EDGE('',*,*,#11209,.F.); +#11280 = PLANE('',#11281); +#11281 = AXIS2_PLACEMENT_3D('',#11282,#11283,#11284); +#11282 = CARTESIAN_POINT('',(-1.,-0.625,0.5)); +#11283 = DIRECTION('',(0.,0.,1.)); +#11284 = DIRECTION('',(1.,0.,-0.)); +#11285 = ADVANCED_FACE('',(#11286),#11292,.F.); +#11286 = FACE_BOUND('',#11287,.F.); +#11287 = EDGE_LOOP('',(#11288,#11289,#11290,#11291)); +#11288 = ORIENTED_EDGE('',*,*,#11271,.F.); +#11289 = ORIENTED_EDGE('',*,*,#11232,.T.); +#11290 = ORIENTED_EDGE('',*,*,#10761,.F.); +#11291 = ORIENTED_EDGE('',*,*,#10829,.T.); +#11292 = PLANE('',#11293); +#11293 = AXIS2_PLACEMENT_3D('',#11294,#11295,#11296); +#11294 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11295 = DIRECTION('',(-1.,0.,0.)); +#11296 = DIRECTION('',(0.,-1.,0.)); +#11297 = ADVANCED_FACE('',(#11298),#11355,.F.); +#11298 = FACE_BOUND('',#11299,.F.); +#11299 = EDGE_LOOP('',(#11300,#11310,#11316,#11317,#11325,#11333,#11341, + #11349)); +#11300 = ORIENTED_EDGE('',*,*,#11301,.F.); +#11301 = EDGE_CURVE('',#11302,#11304,#11306,.T.); +#11302 = VERTEX_POINT('',#11303); +#11303 = CARTESIAN_POINT('',(-0.965,0.625,-6.938893903907E-18)); +#11304 = VERTEX_POINT('',#11305); +#11305 = CARTESIAN_POINT('',(-0.9125,0.625,0.)); +#11306 = LINE('',#11307,#11308); +#11307 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#11308 = VECTOR('',#11309,1.); +#11309 = DIRECTION('',(1.,0.,0.)); +#11310 = ORIENTED_EDGE('',*,*,#11311,.F.); +#11311 = EDGE_CURVE('',#10786,#11302,#11312,.T.); +#11312 = LINE('',#11313,#11314); +#11313 = CARTESIAN_POINT('',(-0.965,-0.625,-6.938893903907E-18)); +#11314 = VECTOR('',#11315,1.); +#11315 = DIRECTION('',(0.,1.,0.)); +#11316 = ORIENTED_EDGE('',*,*,#10785,.T.); +#11317 = ORIENTED_EDGE('',*,*,#11318,.F.); +#11318 = EDGE_CURVE('',#11319,#10788,#11321,.T.); +#11319 = VERTEX_POINT('',#11320); +#11320 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.)); +#11321 = LINE('',#11322,#11323); +#11322 = CARTESIAN_POINT('',(-0.9125,-0.546875,0.)); +#11323 = VECTOR('',#11324,1.); +#11324 = DIRECTION('',(0.,-1.,0.)); +#11325 = ORIENTED_EDGE('',*,*,#11326,.F.); +#11326 = EDGE_CURVE('',#11327,#11319,#11329,.T.); +#11327 = VERTEX_POINT('',#11328); +#11328 = CARTESIAN_POINT('',(-0.685,-0.46875,-6.938893903907E-18)); +#11329 = LINE('',#11330,#11331); +#11330 = CARTESIAN_POINT('',(-4.375E-02,-0.46875,0.)); +#11331 = VECTOR('',#11332,1.); +#11332 = DIRECTION('',(-1.,0.,0.)); +#11333 = ORIENTED_EDGE('',*,*,#11334,.T.); +#11334 = EDGE_CURVE('',#11327,#11335,#11337,.T.); +#11335 = VERTEX_POINT('',#11336); +#11336 = CARTESIAN_POINT('',(-0.685,0.46875,-6.938893903907E-18)); +#11337 = LINE('',#11338,#11339); +#11338 = CARTESIAN_POINT('',(-0.685,-0.625,-6.938893903907E-18)); +#11339 = VECTOR('',#11340,1.); +#11340 = DIRECTION('',(0.,1.,0.)); +#11341 = ORIENTED_EDGE('',*,*,#11342,.F.); +#11342 = EDGE_CURVE('',#11343,#11335,#11345,.T.); +#11343 = VERTEX_POINT('',#11344); +#11344 = CARTESIAN_POINT('',(-0.9125,0.46875,0.)); +#11345 = LINE('',#11346,#11347); +#11346 = CARTESIAN_POINT('',(-0.95625,0.46875,0.)); +#11347 = VECTOR('',#11348,1.); +#11348 = DIRECTION('',(1.,0.,0.)); +#11349 = ORIENTED_EDGE('',*,*,#11350,.F.); +#11350 = EDGE_CURVE('',#11304,#11343,#11351,.T.); +#11351 = LINE('',#11352,#11353); +#11352 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,0.)); +#11353 = VECTOR('',#11354,1.); +#11354 = DIRECTION('',(0.,-1.,0.)); +#11355 = PLANE('',#11356); +#11356 = AXIS2_PLACEMENT_3D('',#11357,#11358,#11359); +#11357 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#11358 = DIRECTION('',(0.,0.,1.)); +#11359 = DIRECTION('',(1.,0.,-0.)); +#11360 = ADVANCED_FACE('',(#11361),#11380,.T.); +#11361 = FACE_BOUND('',#11362,.T.); +#11362 = EDGE_LOOP('',(#11363,#11371,#11378,#11379)); +#11363 = ORIENTED_EDGE('',*,*,#11364,.T.); +#11364 = EDGE_CURVE('',#10796,#11365,#11367,.T.); +#11365 = VERTEX_POINT('',#11366); +#11366 = CARTESIAN_POINT('',(-1.,0.625,3.5E-02)); +#11367 = LINE('',#11368,#11369); +#11368 = CARTESIAN_POINT('',(-1.,-0.625,3.5E-02)); +#11369 = VECTOR('',#11370,1.); +#11370 = DIRECTION('',(0.,1.,0.)); +#11371 = ORIENTED_EDGE('',*,*,#11372,.T.); +#11372 = EDGE_CURVE('',#11365,#11302,#11373,.T.); +#11373 = CIRCLE('',#11374,3.5E-02); +#11374 = AXIS2_PLACEMENT_3D('',#11375,#11376,#11377); +#11375 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11376 = DIRECTION('',(0.,-1.,0.)); +#11377 = DIRECTION('',(0.,0.,1.)); +#11378 = ORIENTED_EDGE('',*,*,#11311,.F.); +#11379 = ORIENTED_EDGE('',*,*,#10795,.F.); +#11380 = CYLINDRICAL_SURFACE('',#11381,3.5E-02); +#11381 = AXIS2_PLACEMENT_3D('',#11382,#11383,#11384); +#11382 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#11383 = DIRECTION('',(0.,1.,0.)); +#11384 = DIRECTION('',(-1.,0.,0.)); +#11385 = ADVANCED_FACE('',(#11386),#11397,.F.); +#11386 = FACE_BOUND('',#11387,.F.); +#11387 = EDGE_LOOP('',(#11388,#11389,#11395,#11396)); +#11388 = ORIENTED_EDGE('',*,*,#10852,.T.); +#11389 = ORIENTED_EDGE('',*,*,#11390,.T.); +#11390 = EDGE_CURVE('',#10853,#11319,#11391,.T.); +#11391 = LINE('',#11392,#11393); +#11392 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11393 = VECTOR('',#11394,1.); +#11394 = DIRECTION('',(-0.,-0.,-1.)); +#11395 = ORIENTED_EDGE('',*,*,#11318,.T.); +#11396 = ORIENTED_EDGE('',*,*,#10838,.T.); +#11397 = PLANE('',#11398); +#11398 = AXIS2_PLACEMENT_3D('',#11399,#11400,#11401); +#11399 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11400 = DIRECTION('',(-1.,0.,0.)); +#11401 = DIRECTION('',(0.,-1.,0.)); +#11402 = ADVANCED_FACE('',(#11403),#11421,.F.); +#11403 = FACE_BOUND('',#11404,.F.); +#11404 = EDGE_LOOP('',(#11405,#11406,#11407,#11415)); +#11405 = ORIENTED_EDGE('',*,*,#10804,.F.); +#11406 = ORIENTED_EDGE('',*,*,#11364,.T.); +#11407 = ORIENTED_EDGE('',*,*,#11408,.T.); +#11408 = EDGE_CURVE('',#11365,#11409,#11411,.T.); +#11409 = VERTEX_POINT('',#11410); +#11410 = CARTESIAN_POINT('',(-1.,0.625,0.465)); +#11411 = LINE('',#11412,#11413); +#11412 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#11413 = VECTOR('',#11414,1.); +#11414 = DIRECTION('',(0.,0.,1.)); +#11415 = ORIENTED_EDGE('',*,*,#11416,.F.); +#11416 = EDGE_CURVE('',#10805,#11409,#11417,.T.); +#11417 = LINE('',#11418,#11419); +#11418 = CARTESIAN_POINT('',(-1.,-0.625,0.465)); +#11419 = VECTOR('',#11420,1.); +#11420 = DIRECTION('',(0.,1.,0.)); +#11421 = PLANE('',#11422); +#11422 = AXIS2_PLACEMENT_3D('',#11423,#11424,#11425); +#11423 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#11424 = DIRECTION('',(1.,0.,0.)); +#11425 = DIRECTION('',(0.,0.,1.)); +#11426 = ADVANCED_FACE('',(#11427),#11439,.T.); +#11427 = FACE_BOUND('',#11428,.T.); +#11428 = EDGE_LOOP('',(#11429,#11430,#11431,#11438)); +#11429 = ORIENTED_EDGE('',*,*,#10812,.T.); +#11430 = ORIENTED_EDGE('',*,*,#11264,.T.); +#11431 = ORIENTED_EDGE('',*,*,#11432,.F.); +#11432 = EDGE_CURVE('',#11409,#11257,#11433,.T.); +#11433 = CIRCLE('',#11434,3.5E-02); +#11434 = AXIS2_PLACEMENT_3D('',#11435,#11436,#11437); +#11435 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11436 = DIRECTION('',(0.,1.,0.)); +#11437 = DIRECTION('',(0.,-0.,1.)); +#11438 = ORIENTED_EDGE('',*,*,#11416,.F.); +#11439 = CYLINDRICAL_SURFACE('',#11440,3.5E-02); +#11440 = AXIS2_PLACEMENT_3D('',#11441,#11442,#11443); +#11441 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#11442 = DIRECTION('',(0.,1.,0.)); +#11443 = DIRECTION('',(-1.,0.,0.)); +#11444 = ADVANCED_FACE('',(#11445),#11457,.F.); +#11445 = FACE_BOUND('',#11446,.F.); +#11446 = EDGE_LOOP('',(#11447,#11448,#11449,#11456)); +#11447 = ORIENTED_EDGE('',*,*,#11390,.F.); +#11448 = ORIENTED_EDGE('',*,*,#10933,.T.); +#11449 = ORIENTED_EDGE('',*,*,#11450,.T.); +#11450 = EDGE_CURVE('',#10926,#11327,#11451,.T.); +#11451 = CIRCLE('',#11452,3.5E-02); +#11452 = AXIS2_PLACEMENT_3D('',#11453,#11454,#11455); +#11453 = CARTESIAN_POINT('',(-0.685,-0.46875,3.5E-02)); +#11454 = DIRECTION('',(-0.,1.,0.)); +#11455 = DIRECTION('',(1.,0.,0.)); +#11456 = ORIENTED_EDGE('',*,*,#11326,.T.); +#11457 = PLANE('',#11458); +#11458 = AXIS2_PLACEMENT_3D('',#11459,#11460,#11461); +#11459 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11460 = DIRECTION('',(0.,1.,0.)); +#11461 = DIRECTION('',(-1.,0.,0.)); +#11462 = ADVANCED_FACE('',(#11463),#11475,.T.); +#11463 = FACE_BOUND('',#11464,.T.); +#11464 = EDGE_LOOP('',(#11465,#11466,#11467,#11468)); +#11465 = ORIENTED_EDGE('',*,*,#10925,.F.); +#11466 = ORIENTED_EDGE('',*,*,#11450,.T.); +#11467 = ORIENTED_EDGE('',*,*,#11334,.T.); +#11468 = ORIENTED_EDGE('',*,*,#11469,.F.); +#11469 = EDGE_CURVE('',#10918,#11335,#11470,.T.); +#11470 = CIRCLE('',#11471,3.5E-02); +#11471 = AXIS2_PLACEMENT_3D('',#11472,#11473,#11474); +#11472 = CARTESIAN_POINT('',(-0.685,0.46875,3.5E-02)); +#11473 = DIRECTION('',(-0.,1.,0.)); +#11474 = DIRECTION('',(1.,0.,0.)); +#11475 = CYLINDRICAL_SURFACE('',#11476,3.5E-02); +#11476 = AXIS2_PLACEMENT_3D('',#11477,#11478,#11479); +#11477 = CARTESIAN_POINT('',(-0.685,-0.625,3.5E-02)); +#11478 = DIRECTION('',(0.,1.,0.)); +#11479 = DIRECTION('',(1.,0.,0.)); +#11480 = ADVANCED_FACE('',(#11481),#11492,.F.); +#11481 = FACE_BOUND('',#11482,.F.); +#11482 = EDGE_LOOP('',(#11483,#11484,#11490,#11491)); +#11483 = ORIENTED_EDGE('',*,*,#10917,.T.); +#11484 = ORIENTED_EDGE('',*,*,#11485,.T.); +#11485 = EDGE_CURVE('',#10910,#11343,#11486,.T.); +#11486 = LINE('',#11487,#11488); +#11487 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11488 = VECTOR('',#11489,1.); +#11489 = DIRECTION('',(-0.,-0.,-1.)); +#11490 = ORIENTED_EDGE('',*,*,#11342,.T.); +#11491 = ORIENTED_EDGE('',*,*,#11469,.F.); +#11492 = PLANE('',#11493); +#11493 = AXIS2_PLACEMENT_3D('',#11494,#11495,#11496); +#11494 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11495 = DIRECTION('',(0.,-1.,0.)); +#11496 = DIRECTION('',(1.,0.,0.)); +#11497 = ADVANCED_FACE('',(#11498),#11509,.F.); +#11498 = FACE_BOUND('',#11499,.F.); +#11499 = EDGE_LOOP('',(#11500,#11501,#11502,#11508)); +#11500 = ORIENTED_EDGE('',*,*,#11485,.F.); +#11501 = ORIENTED_EDGE('',*,*,#10909,.T.); +#11502 = ORIENTED_EDGE('',*,*,#11503,.F.); +#11503 = EDGE_CURVE('',#11304,#10902,#11504,.T.); +#11504 = LINE('',#11505,#11506); +#11505 = CARTESIAN_POINT('',(-0.9125,0.625,0.375)); +#11506 = VECTOR('',#11507,1.); +#11507 = DIRECTION('',(0.,0.,1.)); +#11508 = ORIENTED_EDGE('',*,*,#11350,.T.); +#11509 = PLANE('',#11510); +#11510 = AXIS2_PLACEMENT_3D('',#11511,#11512,#11513); +#11511 = CARTESIAN_POINT('',(-0.9125,0.78125,0.75)); +#11512 = DIRECTION('',(-1.,0.,0.)); +#11513 = DIRECTION('',(0.,-1.,0.)); +#11514 = ADVANCED_FACE('',(#11515),#11540,.F.); +#11515 = FACE_BOUND('',#11516,.F.); +#11516 = EDGE_LOOP('',(#11517,#11518,#11526,#11534)); +#11517 = ORIENTED_EDGE('',*,*,#10893,.T.); +#11518 = ORIENTED_EDGE('',*,*,#11519,.T.); +#11519 = EDGE_CURVE('',#10886,#11520,#11522,.T.); +#11520 = VERTEX_POINT('',#11521); +#11521 = CARTESIAN_POINT('',(0.9125,0.46875,0.)); +#11522 = LINE('',#11523,#11524); +#11523 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11524 = VECTOR('',#11525,1.); +#11525 = DIRECTION('',(-0.,-0.,-1.)); +#11526 = ORIENTED_EDGE('',*,*,#11527,.T.); +#11527 = EDGE_CURVE('',#11520,#11528,#11530,.T.); +#11528 = VERTEX_POINT('',#11529); +#11529 = CARTESIAN_POINT('',(0.9125,0.625,0.)); +#11530 = LINE('',#11531,#11532); +#11531 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,0.)); +#11532 = VECTOR('',#11533,1.); +#11533 = DIRECTION('',(0.,1.,0.)); +#11534 = ORIENTED_EDGE('',*,*,#11535,.F.); +#11535 = EDGE_CURVE('',#10894,#11528,#11536,.T.); +#11536 = LINE('',#11537,#11538); +#11537 = CARTESIAN_POINT('',(0.9125,0.625,0.375)); +#11538 = VECTOR('',#11539,1.); +#11539 = DIRECTION('',(0.,0.,-1.)); +#11540 = PLANE('',#11541); +#11541 = AXIS2_PLACEMENT_3D('',#11542,#11543,#11544); +#11542 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11543 = DIRECTION('',(1.,0.,0.)); +#11544 = DIRECTION('',(-0.,1.,0.)); +#11545 = ADVANCED_FACE('',(#11546),#11565,.F.); +#11546 = FACE_BOUND('',#11547,.F.); +#11547 = EDGE_LOOP('',(#11548,#11549,#11550,#11559)); +#11548 = ORIENTED_EDGE('',*,*,#11519,.F.); +#11549 = ORIENTED_EDGE('',*,*,#10885,.T.); +#11550 = ORIENTED_EDGE('',*,*,#11551,.F.); +#11551 = EDGE_CURVE('',#11552,#10878,#11554,.T.); +#11552 = VERTEX_POINT('',#11553); +#11553 = CARTESIAN_POINT('',(0.685,0.46875,-6.938893903907E-18)); +#11554 = CIRCLE('',#11555,3.5E-02); +#11555 = AXIS2_PLACEMENT_3D('',#11556,#11557,#11558); +#11556 = CARTESIAN_POINT('',(0.685,0.46875,3.5E-02)); +#11557 = DIRECTION('',(0.,1.,-0.)); +#11558 = DIRECTION('',(-1.,0.,0.)); +#11559 = ORIENTED_EDGE('',*,*,#11560,.T.); +#11560 = EDGE_CURVE('',#11552,#11520,#11561,.T.); +#11561 = LINE('',#11562,#11563); +#11562 = CARTESIAN_POINT('',(-0.13125,0.46875,0.)); +#11563 = VECTOR('',#11564,1.); +#11564 = DIRECTION('',(1.,0.,0.)); +#11565 = PLANE('',#11566); +#11566 = AXIS2_PLACEMENT_3D('',#11567,#11568,#11569); +#11567 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11568 = DIRECTION('',(0.,-1.,0.)); +#11569 = DIRECTION('',(1.,0.,0.)); +#11570 = ADVANCED_FACE('',(#11571),#11590,.T.); +#11571 = FACE_BOUND('',#11572,.T.); +#11572 = EDGE_LOOP('',(#11573,#11574,#11582,#11589)); +#11573 = ORIENTED_EDGE('',*,*,#11551,.F.); +#11574 = ORIENTED_EDGE('',*,*,#11575,.F.); +#11575 = EDGE_CURVE('',#11576,#11552,#11578,.T.); +#11576 = VERTEX_POINT('',#11577); +#11577 = CARTESIAN_POINT('',(0.685,-0.46875,-6.938893903907E-18)); +#11578 = LINE('',#11579,#11580); +#11579 = CARTESIAN_POINT('',(0.685,-0.625,-6.938893903907E-18)); +#11580 = VECTOR('',#11581,1.); +#11581 = DIRECTION('',(0.,1.,0.)); +#11582 = ORIENTED_EDGE('',*,*,#11583,.T.); +#11583 = EDGE_CURVE('',#11576,#10870,#11584,.T.); +#11584 = CIRCLE('',#11585,3.5E-02); +#11585 = AXIS2_PLACEMENT_3D('',#11586,#11587,#11588); +#11586 = CARTESIAN_POINT('',(0.685,-0.46875,3.5E-02)); +#11587 = DIRECTION('',(0.,1.,-0.)); +#11588 = DIRECTION('',(-1.,0.,0.)); +#11589 = ORIENTED_EDGE('',*,*,#10877,.T.); +#11590 = CYLINDRICAL_SURFACE('',#11591,3.5E-02); +#11591 = AXIS2_PLACEMENT_3D('',#11592,#11593,#11594); +#11592 = CARTESIAN_POINT('',(0.685,-0.625,3.5E-02)); +#11593 = DIRECTION('',(0.,1.,0.)); +#11594 = DIRECTION('',(-1.,0.,0.)); +#11595 = ADVANCED_FACE('',(#11596),#11614,.F.); +#11596 = FACE_BOUND('',#11597,.F.); +#11597 = EDGE_LOOP('',(#11598,#11599,#11607,#11613)); +#11598 = ORIENTED_EDGE('',*,*,#10869,.T.); +#11599 = ORIENTED_EDGE('',*,*,#11600,.T.); +#11600 = EDGE_CURVE('',#10862,#11601,#11603,.T.); +#11601 = VERTEX_POINT('',#11602); +#11602 = CARTESIAN_POINT('',(0.9125,-0.46875,0.)); +#11603 = LINE('',#11604,#11605); +#11604 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11605 = VECTOR('',#11606,1.); +#11606 = DIRECTION('',(-0.,-0.,-1.)); +#11607 = ORIENTED_EDGE('',*,*,#11608,.T.); +#11608 = EDGE_CURVE('',#11601,#11576,#11609,.T.); +#11609 = LINE('',#11610,#11611); +#11610 = CARTESIAN_POINT('',(0.78125,-0.46875,0.)); +#11611 = VECTOR('',#11612,1.); +#11612 = DIRECTION('',(-1.,0.,0.)); +#11613 = ORIENTED_EDGE('',*,*,#11583,.T.); +#11614 = PLANE('',#11615); +#11615 = AXIS2_PLACEMENT_3D('',#11616,#11617,#11618); +#11616 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11617 = DIRECTION('',(0.,1.,0.)); +#11618 = DIRECTION('',(-1.,0.,0.)); +#11619 = ADVANCED_FACE('',(#11620),#11631,.F.); +#11620 = FACE_BOUND('',#11621,.F.); +#11621 = EDGE_LOOP('',(#11622,#11623,#11624,#11625)); +#11622 = ORIENTED_EDGE('',*,*,#11600,.F.); +#11623 = ORIENTED_EDGE('',*,*,#10861,.T.); +#11624 = ORIENTED_EDGE('',*,*,#10983,.T.); +#11625 = ORIENTED_EDGE('',*,*,#11626,.T.); +#11626 = EDGE_CURVE('',#10974,#11601,#11627,.T.); +#11627 = LINE('',#11628,#11629); +#11628 = CARTESIAN_POINT('',(0.9125,-0.703125,0.)); +#11629 = VECTOR('',#11630,1.); +#11630 = DIRECTION('',(0.,1.,0.)); +#11631 = PLANE('',#11632); +#11632 = AXIS2_PLACEMENT_3D('',#11633,#11634,#11635); +#11633 = CARTESIAN_POINT('',(0.9125,-0.78125,0.75)); +#11634 = DIRECTION('',(1.,0.,0.)); +#11635 = DIRECTION('',(-0.,1.,0.)); +#11636 = ADVANCED_FACE('',(#11637),#11662,.T.); +#11637 = FACE_BOUND('',#11638,.T.); +#11638 = EDGE_LOOP('',(#11639,#11647,#11648,#11656)); +#11639 = ORIENTED_EDGE('',*,*,#11640,.T.); +#11640 = EDGE_CURVE('',#11641,#10942,#11643,.T.); +#11641 = VERTEX_POINT('',#11642); +#11642 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11643 = LINE('',#11644,#11645); +#11644 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11645 = VECTOR('',#11646,1.); +#11646 = DIRECTION('',(0.,0.,1.)); +#11647 = ORIENTED_EDGE('',*,*,#10941,.T.); +#11648 = ORIENTED_EDGE('',*,*,#11649,.F.); +#11649 = EDGE_CURVE('',#11650,#10944,#11652,.T.); +#11650 = VERTEX_POINT('',#11651); +#11651 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11652 = LINE('',#11653,#11654); +#11653 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11654 = VECTOR('',#11655,1.); +#11655 = DIRECTION('',(0.,0.,1.)); +#11656 = ORIENTED_EDGE('',*,*,#11657,.F.); +#11657 = EDGE_CURVE('',#11641,#11650,#11658,.T.); +#11658 = LINE('',#11659,#11660); +#11659 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11660 = VECTOR('',#11661,1.); +#11661 = DIRECTION('',(0.,-1.,0.)); +#11662 = PLANE('',#11663); +#11663 = AXIS2_PLACEMENT_3D('',#11664,#11665,#11666); +#11664 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11665 = DIRECTION('',(1.,0.,0.)); +#11666 = DIRECTION('',(0.,-1.,0.)); +#11667 = ADVANCED_FACE('',(#11668),#11686,.T.); +#11668 = FACE_BOUND('',#11669,.T.); +#11669 = EDGE_LOOP('',(#11670,#11678,#11679,#11680)); +#11670 = ORIENTED_EDGE('',*,*,#11671,.T.); +#11671 = EDGE_CURVE('',#11672,#10952,#11674,.T.); +#11672 = VERTEX_POINT('',#11673); +#11673 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11674 = LINE('',#11675,#11676); +#11675 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11676 = VECTOR('',#11677,1.); +#11677 = DIRECTION('',(0.,0.,1.)); +#11678 = ORIENTED_EDGE('',*,*,#10959,.T.); +#11679 = ORIENTED_EDGE('',*,*,#11640,.F.); +#11680 = ORIENTED_EDGE('',*,*,#11681,.F.); +#11681 = EDGE_CURVE('',#11672,#11641,#11682,.T.); +#11682 = LINE('',#11683,#11684); +#11683 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11684 = VECTOR('',#11685,1.); +#11685 = DIRECTION('',(0.866025403784,0.5,0.)); +#11686 = PLANE('',#11687); +#11687 = AXIS2_PLACEMENT_3D('',#11688,#11689,#11690); +#11688 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11689 = DIRECTION('',(-0.5,0.866025403784,0.)); +#11690 = DIRECTION('',(0.866025403784,0.5,0.)); +#11691 = ADVANCED_FACE('',(#11692),#11703,.T.); +#11692 = FACE_BOUND('',#11693,.T.); +#11693 = EDGE_LOOP('',(#11694,#11695,#11696,#11697)); +#11694 = ORIENTED_EDGE('',*,*,#11649,.T.); +#11695 = ORIENTED_EDGE('',*,*,#10951,.T.); +#11696 = ORIENTED_EDGE('',*,*,#11671,.F.); +#11697 = ORIENTED_EDGE('',*,*,#11698,.F.); +#11698 = EDGE_CURVE('',#11650,#11672,#11699,.T.); +#11699 = LINE('',#11700,#11701); +#11700 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11701 = VECTOR('',#11702,1.); +#11702 = DIRECTION('',(-0.866025403784,0.5,0.)); +#11703 = PLANE('',#11704); +#11704 = AXIS2_PLACEMENT_3D('',#11705,#11706,#11707); +#11705 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11706 = DIRECTION('',(-0.5,-0.866025403784,0.)); +#11707 = DIRECTION('',(-0.866025403784,0.5,0.)); +#11708 = ADVANCED_FACE('',(#11709),#11731,.F.); +#11709 = FACE_BOUND('',#11710,.F.); +#11710 = EDGE_LOOP('',(#11711,#11719,#11720,#11721,#11722,#11723,#11724, + #11725)); +#11711 = ORIENTED_EDGE('',*,*,#11712,.F.); +#11712 = EDGE_CURVE('',#11528,#11713,#11715,.T.); +#11713 = VERTEX_POINT('',#11714); +#11714 = CARTESIAN_POINT('',(0.965,0.625,-6.938893903907E-18)); +#11715 = LINE('',#11716,#11717); +#11716 = CARTESIAN_POINT('',(0.65,0.625,0.)); +#11717 = VECTOR('',#11718,1.); +#11718 = DIRECTION('',(1.,0.,0.)); +#11719 = ORIENTED_EDGE('',*,*,#11527,.F.); +#11720 = ORIENTED_EDGE('',*,*,#11560,.F.); +#11721 = ORIENTED_EDGE('',*,*,#11575,.F.); +#11722 = ORIENTED_EDGE('',*,*,#11608,.F.); +#11723 = ORIENTED_EDGE('',*,*,#11626,.F.); +#11724 = ORIENTED_EDGE('',*,*,#10973,.T.); +#11725 = ORIENTED_EDGE('',*,*,#11726,.T.); +#11726 = EDGE_CURVE('',#10976,#11713,#11727,.T.); +#11727 = LINE('',#11728,#11729); +#11728 = CARTESIAN_POINT('',(0.965,-0.625,-6.938893903907E-18)); +#11729 = VECTOR('',#11730,1.); +#11730 = DIRECTION('',(0.,1.,0.)); +#11731 = PLANE('',#11732); +#11732 = AXIS2_PLACEMENT_3D('',#11733,#11734,#11735); +#11733 = CARTESIAN_POINT('',(0.65,-0.625,0.)); +#11734 = DIRECTION('',(0.,0.,1.)); +#11735 = DIRECTION('',(1.,0.,-0.)); +#11736 = ADVANCED_FACE('',(#11737),#11756,.T.); +#11737 = FACE_BOUND('',#11738,.T.); +#11738 = EDGE_LOOP('',(#11739,#11740,#11741,#11750)); +#11739 = ORIENTED_EDGE('',*,*,#11025,.T.); +#11740 = ORIENTED_EDGE('',*,*,#11726,.T.); +#11741 = ORIENTED_EDGE('',*,*,#11742,.F.); +#11742 = EDGE_CURVE('',#11743,#11713,#11745,.T.); +#11743 = VERTEX_POINT('',#11744); +#11744 = CARTESIAN_POINT('',(1.,0.625,3.5E-02)); +#11745 = CIRCLE('',#11746,3.5E-02); +#11746 = AXIS2_PLACEMENT_3D('',#11747,#11748,#11749); +#11747 = CARTESIAN_POINT('',(0.965,0.625,3.5E-02)); +#11748 = DIRECTION('',(0.,1.,0.)); +#11749 = DIRECTION('',(0.,-0.,1.)); +#11750 = ORIENTED_EDGE('',*,*,#11751,.F.); +#11751 = EDGE_CURVE('',#11018,#11743,#11752,.T.); +#11752 = LINE('',#11753,#11754); +#11753 = CARTESIAN_POINT('',(1.,-0.625,3.5E-02)); +#11754 = VECTOR('',#11755,1.); +#11755 = DIRECTION('',(0.,1.,0.)); +#11756 = CYLINDRICAL_SURFACE('',#11757,3.5E-02); +#11757 = AXIS2_PLACEMENT_3D('',#11758,#11759,#11760); +#11758 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#11759 = DIRECTION('',(0.,1.,0.)); +#11760 = DIRECTION('',(1.,0.,0.)); +#11761 = ADVANCED_FACE('',(#11762),#11780,.T.); +#11762 = FACE_BOUND('',#11763,.T.); +#11763 = EDGE_LOOP('',(#11764,#11765,#11766,#11774)); +#11764 = ORIENTED_EDGE('',*,*,#11017,.F.); +#11765 = ORIENTED_EDGE('',*,*,#11751,.T.); +#11766 = ORIENTED_EDGE('',*,*,#11767,.T.); +#11767 = EDGE_CURVE('',#11743,#11768,#11770,.T.); +#11768 = VERTEX_POINT('',#11769); +#11769 = CARTESIAN_POINT('',(1.,0.625,0.465)); +#11770 = LINE('',#11771,#11772); +#11771 = CARTESIAN_POINT('',(1.,0.625,0.)); +#11772 = VECTOR('',#11773,1.); +#11773 = DIRECTION('',(0.,0.,1.)); +#11774 = ORIENTED_EDGE('',*,*,#11775,.F.); +#11775 = EDGE_CURVE('',#11009,#11768,#11776,.T.); +#11776 = LINE('',#11777,#11778); +#11777 = CARTESIAN_POINT('',(1.,-0.625,0.465)); +#11778 = VECTOR('',#11779,1.); +#11779 = DIRECTION('',(0.,1.,0.)); +#11780 = PLANE('',#11781); +#11781 = AXIS2_PLACEMENT_3D('',#11782,#11783,#11784); +#11782 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#11783 = DIRECTION('',(1.,0.,0.)); +#11784 = DIRECTION('',(0.,0.,1.)); +#11785 = ADVANCED_FACE('',(#11786),#11805,.T.); +#11786 = FACE_BOUND('',#11787,.T.); +#11787 = EDGE_LOOP('',(#11788,#11789,#11798,#11804)); +#11788 = ORIENTED_EDGE('',*,*,#11775,.T.); +#11789 = ORIENTED_EDGE('',*,*,#11790,.T.); +#11790 = EDGE_CURVE('',#11768,#11791,#11793,.T.); +#11791 = VERTEX_POINT('',#11792); +#11792 = CARTESIAN_POINT('',(0.965,0.625,0.5)); +#11793 = CIRCLE('',#11794,3.5E-02); +#11794 = AXIS2_PLACEMENT_3D('',#11795,#11796,#11797); +#11795 = CARTESIAN_POINT('',(0.965,0.625,0.465)); +#11796 = DIRECTION('',(0.,-1.,0.)); +#11797 = DIRECTION('',(0.,0.,1.)); +#11798 = ORIENTED_EDGE('',*,*,#11799,.F.); +#11799 = EDGE_CURVE('',#11001,#11791,#11800,.T.); +#11800 = LINE('',#11801,#11802); +#11801 = CARTESIAN_POINT('',(0.965,-0.625,0.5)); +#11802 = VECTOR('',#11803,1.); +#11803 = DIRECTION('',(0.,1.,0.)); +#11804 = ORIENTED_EDGE('',*,*,#11008,.F.); +#11805 = CYLINDRICAL_SURFACE('',#11806,3.5E-02); +#11806 = AXIS2_PLACEMENT_3D('',#11807,#11808,#11809); +#11807 = CARTESIAN_POINT('',(0.965,-0.625,0.465)); +#11808 = DIRECTION('',(0.,1.,0.)); +#11809 = DIRECTION('',(1.,0.,0.)); +#11810 = ADVANCED_FACE('',(#11811),#11852,.T.); +#11811 = FACE_BOUND('',#11812,.T.); +#11812 = EDGE_LOOP('',(#11813,#11821,#11829,#11835,#11836,#11844,#11850, + #11851)); +#11813 = ORIENTED_EDGE('',*,*,#11814,.F.); +#11814 = EDGE_CURVE('',#11815,#11791,#11817,.T.); +#11815 = VERTEX_POINT('',#11816); +#11816 = CARTESIAN_POINT('',(0.9125,0.625,0.5)); +#11817 = LINE('',#11818,#11819); +#11818 = CARTESIAN_POINT('',(0.65,0.625,0.5)); +#11819 = VECTOR('',#11820,1.); +#11820 = DIRECTION('',(1.,0.,0.)); +#11821 = ORIENTED_EDGE('',*,*,#11822,.F.); +#11822 = EDGE_CURVE('',#11823,#11815,#11825,.T.); +#11823 = VERTEX_POINT('',#11824); +#11824 = CARTESIAN_POINT('',(0.9125,0.46875,0.5)); +#11825 = LINE('',#11826,#11827); +#11826 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,0.5)); +#11827 = VECTOR('',#11828,1.); +#11828 = DIRECTION('',(0.,1.,0.)); +#11829 = ORIENTED_EDGE('',*,*,#11830,.F.); +#11830 = EDGE_CURVE('',#11106,#11823,#11831,.T.); +#11831 = LINE('',#11832,#11833); +#11832 = CARTESIAN_POINT('',(-0.13125,0.46875,0.5)); +#11833 = VECTOR('',#11834,1.); +#11834 = DIRECTION('',(1.,0.,0.)); +#11835 = ORIENTED_EDGE('',*,*,#11105,.F.); +#11836 = ORIENTED_EDGE('',*,*,#11837,.F.); +#11837 = EDGE_CURVE('',#11838,#11097,#11840,.T.); +#11838 = VERTEX_POINT('',#11839); +#11839 = CARTESIAN_POINT('',(0.9125,-0.46875,0.5)); +#11840 = LINE('',#11841,#11842); +#11841 = CARTESIAN_POINT('',(0.78125,-0.46875,0.5)); +#11842 = VECTOR('',#11843,1.); +#11843 = DIRECTION('',(-1.,0.,0.)); +#11844 = ORIENTED_EDGE('',*,*,#11845,.F.); +#11845 = EDGE_CURVE('',#10993,#11838,#11846,.T.); +#11846 = LINE('',#11847,#11848); +#11847 = CARTESIAN_POINT('',(0.9125,-0.703125,0.5)); +#11848 = VECTOR('',#11849,1.); +#11849 = DIRECTION('',(0.,1.,0.)); +#11850 = ORIENTED_EDGE('',*,*,#11000,.T.); +#11851 = ORIENTED_EDGE('',*,*,#11799,.T.); +#11852 = PLANE('',#11853); +#11853 = AXIS2_PLACEMENT_3D('',#11854,#11855,#11856); +#11854 = CARTESIAN_POINT('',(0.65,-0.625,0.5)); +#11855 = DIRECTION('',(0.,0.,1.)); +#11856 = DIRECTION('',(1.,0.,-0.)); +#11857 = ADVANCED_FACE('',(#11858),#11869,.F.); +#11858 = FACE_BOUND('',#11859,.F.); +#11859 = EDGE_LOOP('',(#11860,#11866,#11867,#11868)); +#11860 = ORIENTED_EDGE('',*,*,#11861,.F.); +#11861 = EDGE_CURVE('',#11838,#11041,#11862,.T.); +#11862 = LINE('',#11863,#11864); +#11863 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11864 = VECTOR('',#11865,1.); +#11865 = DIRECTION('',(-0.,-0.,-1.)); +#11866 = ORIENTED_EDGE('',*,*,#11845,.F.); +#11867 = ORIENTED_EDGE('',*,*,#10992,.T.); +#11868 = ORIENTED_EDGE('',*,*,#11050,.F.); +#11869 = PLANE('',#11870); +#11870 = AXIS2_PLACEMENT_3D('',#11871,#11872,#11873); +#11871 = CARTESIAN_POINT('',(0.9125,-0.78125,0.75)); +#11872 = DIRECTION('',(1.,0.,0.)); +#11873 = DIRECTION('',(-0.,1.,0.)); +#11874 = ADVANCED_FACE('',(#11875),#11881,.F.); +#11875 = FACE_BOUND('',#11876,.F.); +#11876 = EDGE_LOOP('',(#11877,#11878,#11879,#11880)); +#11877 = ORIENTED_EDGE('',*,*,#11837,.F.); +#11878 = ORIENTED_EDGE('',*,*,#11861,.T.); +#11879 = ORIENTED_EDGE('',*,*,#11040,.F.); +#11880 = ORIENTED_EDGE('',*,*,#11096,.T.); +#11881 = PLANE('',#11882); +#11882 = AXIS2_PLACEMENT_3D('',#11883,#11884,#11885); +#11883 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11884 = DIRECTION('',(0.,1.,0.)); +#11885 = DIRECTION('',(-1.,0.,0.)); +#11886 = ADVANCED_FACE('',(#11887),#11903,.F.); +#11887 = FACE_BOUND('',#11888,.F.); +#11888 = EDGE_LOOP('',(#11889,#11890,#11896,#11897)); +#11889 = ORIENTED_EDGE('',*,*,#11822,.F.); +#11890 = ORIENTED_EDGE('',*,*,#11891,.T.); +#11891 = EDGE_CURVE('',#11823,#11074,#11892,.T.); +#11892 = LINE('',#11893,#11894); +#11893 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11894 = VECTOR('',#11895,1.); +#11895 = DIRECTION('',(-0.,-0.,-1.)); +#11896 = ORIENTED_EDGE('',*,*,#11081,.F.); +#11897 = ORIENTED_EDGE('',*,*,#11898,.F.); +#11898 = EDGE_CURVE('',#11815,#11065,#11899,.T.); +#11899 = LINE('',#11900,#11901); +#11900 = CARTESIAN_POINT('',(0.9125,0.625,0.375)); +#11901 = VECTOR('',#11902,1.); +#11902 = DIRECTION('',(0.,0.,-1.)); +#11903 = PLANE('',#11904); +#11904 = AXIS2_PLACEMENT_3D('',#11905,#11906,#11907); +#11905 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11906 = DIRECTION('',(1.,0.,0.)); +#11907 = DIRECTION('',(-0.,1.,0.)); +#11908 = ADVANCED_FACE('',(#11909),#11915,.F.); +#11909 = FACE_BOUND('',#11910,.F.); +#11910 = EDGE_LOOP('',(#11911,#11912,#11913,#11914)); +#11911 = ORIENTED_EDGE('',*,*,#11891,.F.); +#11912 = ORIENTED_EDGE('',*,*,#11830,.F.); +#11913 = ORIENTED_EDGE('',*,*,#11113,.F.); +#11914 = ORIENTED_EDGE('',*,*,#11073,.F.); +#11915 = PLANE('',#11916); +#11916 = AXIS2_PLACEMENT_3D('',#11917,#11918,#11919); +#11917 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11918 = DIRECTION('',(0.,-1.,0.)); +#11919 = DIRECTION('',(1.,0.,0.)); +#11920 = ADVANCED_FACE('',(#11921),#11933,.T.); +#11921 = FACE_BOUND('',#11922,.T.); +#11922 = EDGE_LOOP('',(#11923,#11924,#11925,#11926,#11927,#11928,#11929, + #11930,#11931,#11932)); +#11923 = ORIENTED_EDGE('',*,*,#11301,.F.); +#11924 = ORIENTED_EDGE('',*,*,#11372,.F.); +#11925 = ORIENTED_EDGE('',*,*,#11408,.T.); +#11926 = ORIENTED_EDGE('',*,*,#11432,.T.); +#11927 = ORIENTED_EDGE('',*,*,#11256,.T.); +#11928 = ORIENTED_EDGE('',*,*,#11217,.F.); +#11929 = ORIENTED_EDGE('',*,*,#11144,.F.); +#11930 = ORIENTED_EDGE('',*,*,#11136,.F.); +#11931 = ORIENTED_EDGE('',*,*,#11128,.T.); +#11932 = ORIENTED_EDGE('',*,*,#11503,.F.); +#11933 = PLANE('',#11934); +#11934 = AXIS2_PLACEMENT_3D('',#11935,#11936,#11937); +#11935 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#11936 = DIRECTION('',(0.,1.,0.)); +#11937 = DIRECTION('',(0.,-0.,1.)); +#11938 = ADVANCED_FACE('',(#11939),#11951,.T.); +#11939 = FACE_BOUND('',#11940,.T.); +#11940 = EDGE_LOOP('',(#11941,#11942,#11943,#11944,#11945,#11946,#11947, + #11948,#11949,#11950)); +#11941 = ORIENTED_EDGE('',*,*,#11712,.F.); +#11942 = ORIENTED_EDGE('',*,*,#11535,.F.); +#11943 = ORIENTED_EDGE('',*,*,#11169,.T.); +#11944 = ORIENTED_EDGE('',*,*,#11161,.T.); +#11945 = ORIENTED_EDGE('',*,*,#11153,.F.); +#11946 = ORIENTED_EDGE('',*,*,#11898,.F.); +#11947 = ORIENTED_EDGE('',*,*,#11814,.T.); +#11948 = ORIENTED_EDGE('',*,*,#11790,.F.); +#11949 = ORIENTED_EDGE('',*,*,#11767,.F.); +#11950 = ORIENTED_EDGE('',*,*,#11742,.T.); +#11951 = PLANE('',#11952); +#11952 = AXIS2_PLACEMENT_3D('',#11953,#11954,#11955); +#11953 = CARTESIAN_POINT('',(0.65,0.625,0.)); +#11954 = DIRECTION('',(0.,1.,0.)); +#11955 = DIRECTION('',(0.,-0.,1.)); +#11956 = ADVANCED_FACE('',(#11957),#11962,.T.); +#11957 = FACE_BOUND('',#11958,.T.); +#11958 = EDGE_LOOP('',(#11959,#11960,#11961)); +#11959 = ORIENTED_EDGE('',*,*,#11681,.T.); +#11960 = ORIENTED_EDGE('',*,*,#11657,.T.); +#11961 = ORIENTED_EDGE('',*,*,#11698,.T.); +#11962 = PLANE('',#11963); +#11963 = AXIS2_PLACEMENT_3D('',#11964,#11965,#11966); +#11964 = CARTESIAN_POINT('',(0.144337567297,9.251858538543E-18,1.75E-02) + ); +#11965 = DIRECTION('',(-0.,-0.,-1.)); +#11966 = DIRECTION('',(-1.,0.,0.)); +#11967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#11971)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#11968,#11969,#11970)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#11968 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#11969 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#11970 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#11971 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#11968, + 'distance_accuracy_value','confusion accuracy'); +#11972 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#11973,#11975); +#11973 = ( REPRESENTATION_RELATIONSHIP('','',#10443,#10420) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#11974) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#11974 = ITEM_DEFINED_TRANSFORMATION('','',#11,#10421); +#11975 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #11976); +#11976 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','=>[0:1:1:11]','',#10415, + #10438,$); +#11977 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#10440)); +#11978 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#11979,#11981); +#11979 = ( REPRESENTATION_RELATIONSHIP('','',#1360,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#11980) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#11980 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43); +#11981 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #11982); +#11982 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','P4','',#5,#1355,$); +#11983 = SHAPE_DEFINITION_REPRESENTATION(#11984,#11990); +#11984 = PRODUCT_DEFINITION_SHAPE('','',#11985); +#11985 = PRODUCT_DEFINITION('design','',#11986,#11989); +#11986 = PRODUCT_DEFINITION_FORMATION('','',#11987); +#11987 = PRODUCT('JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical', + 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical','',(#11988)); +#11988 = PRODUCT_CONTEXT('',#2,'mechanical'); +#11989 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#11990 = SHAPE_REPRESENTATION('',(#11,#11991),#11995); +#11991 = AXIS2_PLACEMENT_3D('',#11992,#11993,#11994); +#11992 = CARTESIAN_POINT('',(0.,0.,0.)); +#11993 = DIRECTION('',(0.,0.,1.)); +#11994 = DIRECTION('',(1.,0.,-0.)); +#11995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#11999)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#11996,#11997,#11998)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#11996 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#11997 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#11998 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#11999 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#11996, + 'distance_accuracy_value','confusion accuracy'); +#12000 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12001,#12003); +#12001 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12002) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12002 = ITEM_DEFINED_TRANSFORMATION('','',#11,#47); +#12003 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12004); +#12004 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','P10','',#5,#11985,$); +#12005 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#11987)); +#12006 = SHAPE_DEFINITION_REPRESENTATION(#12007,#12013); +#12007 = PRODUCT_DEFINITION_SHAPE('','',#12008); +#12008 = PRODUCT_DEFINITION('design','',#12009,#12012); +#12009 = PRODUCT_DEFINITION_FORMATION('','',#12010); +#12010 = PRODUCT('JST_B2B_XH_A','JST_B2B_XH_A','',(#12011)); +#12011 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12012 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12013 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#12014),#14729); +#12014 = MANIFOLD_SOLID_BREP('',#12015); +#12015 = CLOSED_SHELL('',(#12016,#12088,#12127,#12151,#12216,#12240, + #12328,#12352,#12417,#12442,#12491,#12508,#12532,#12549,#12687, + #12711,#12881,#12905,#12938,#12962,#12993,#13010,#13043,#13067, + #13098,#13110,#13143,#13160,#13177,#13189,#13269,#13286,#13303, + #13320,#13337,#13354,#13371,#13388,#13405,#13422,#13439,#13451, + #13468,#13485,#13531,#13577,#13608,#13632,#13656,#13673,#13704, + #13728,#13752,#13769,#13832,#13856,#13912,#13929,#13992,#14016, + #14072,#14089,#14120,#14144,#14168,#14185,#14216,#14240,#14264, + #14281,#14328,#14359,#14371,#14388,#14414,#14447,#14494,#14525, + #14537,#14554,#14580,#14613,#14625,#14637,#14654,#14671,#14683, + #14700,#14717)); +#12016 = ADVANCED_FACE('',(#12017),#12083,.T.); +#12017 = FACE_BOUND('',#12018,.T.); +#12018 = EDGE_LOOP('',(#12019,#12029,#12037,#12045,#12053,#12061,#12069, + #12077)); +#12019 = ORIENTED_EDGE('',*,*,#12020,.T.); +#12020 = EDGE_CURVE('',#12021,#12023,#12025,.T.); +#12021 = VERTEX_POINT('',#12022); +#12022 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#12023 = VERTEX_POINT('',#12024); +#12024 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#12025 = LINE('',#12026,#12027); +#12026 = CARTESIAN_POINT('',(4.95,0.5,7.)); +#12027 = VECTOR('',#12028,1.); +#12028 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12029 = ORIENTED_EDGE('',*,*,#12030,.T.); +#12030 = EDGE_CURVE('',#12023,#12031,#12033,.T.); +#12031 = VERTEX_POINT('',#12032); +#12032 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#12033 = LINE('',#12034,#12035); +#12034 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#12035 = VECTOR('',#12036,1.); +#12036 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12037 = ORIENTED_EDGE('',*,*,#12038,.T.); +#12038 = EDGE_CURVE('',#12031,#12039,#12041,.T.); +#12039 = VERTEX_POINT('',#12040); +#12040 = CARTESIAN_POINT('',(4.95,-3.4,7.)); +#12041 = LINE('',#12042,#12043); +#12042 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#12043 = VECTOR('',#12044,1.); +#12044 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12045 = ORIENTED_EDGE('',*,*,#12046,.T.); +#12046 = EDGE_CURVE('',#12039,#12047,#12049,.T.); +#12047 = VERTEX_POINT('',#12048); +#12048 = CARTESIAN_POINT('',(4.95,0.5,7.)); +#12049 = LINE('',#12050,#12051); +#12050 = CARTESIAN_POINT('',(4.95,-3.4,7.)); +#12051 = VECTOR('',#12052,1.); +#12052 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12053 = ORIENTED_EDGE('',*,*,#12054,.T.); +#12054 = EDGE_CURVE('',#12047,#12055,#12057,.T.); +#12055 = VERTEX_POINT('',#12056); +#12056 = CARTESIAN_POINT('',(4.3,0.5,7.)); +#12057 = LINE('',#12058,#12059); +#12058 = CARTESIAN_POINT('',(4.95,0.5,7.)); +#12059 = VECTOR('',#12060,1.); +#12060 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12061 = ORIENTED_EDGE('',*,*,#12062,.F.); +#12062 = EDGE_CURVE('',#12063,#12055,#12065,.T.); +#12063 = VERTEX_POINT('',#12064); +#12064 = CARTESIAN_POINT('',(4.3,-2.85,7.)); +#12065 = LINE('',#12066,#12067); +#12066 = CARTESIAN_POINT('',(4.3,-2.65,7.)); +#12067 = VECTOR('',#12068,1.); +#12068 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12069 = ORIENTED_EDGE('',*,*,#12070,.F.); +#12070 = EDGE_CURVE('',#12071,#12063,#12073,.T.); +#12071 = VERTEX_POINT('',#12072); +#12072 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#12073 = LINE('',#12074,#12075); +#12074 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#12075 = VECTOR('',#12076,1.); +#12076 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12077 = ORIENTED_EDGE('',*,*,#12078,.F.); +#12078 = EDGE_CURVE('',#12021,#12071,#12079,.T.); +#12079 = LINE('',#12080,#12081); +#12080 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#12081 = VECTOR('',#12082,1.); +#12082 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12083 = PLANE('',#12084); +#12084 = AXIS2_PLACEMENT_3D('',#12085,#12086,#12087); +#12085 = CARTESIAN_POINT('',(1.25,-0.525,7.)); +#12086 = DIRECTION('',(0.,0.,1.)); +#12087 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12088 = ADVANCED_FACE('',(#12089),#12122,.T.); +#12089 = FACE_BOUND('',#12090,.T.); +#12090 = EDGE_LOOP('',(#12091,#12101,#12109,#12115,#12116)); +#12091 = ORIENTED_EDGE('',*,*,#12092,.T.); +#12092 = EDGE_CURVE('',#12093,#12095,#12097,.T.); +#12093 = VERTEX_POINT('',#12094); +#12094 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#12095 = VERTEX_POINT('',#12096); +#12096 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#12097 = LINE('',#12098,#12099); +#12098 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#12099 = VECTOR('',#12100,1.); +#12100 = DIRECTION('',(-0.,0.,-1.)); +#12101 = ORIENTED_EDGE('',*,*,#12102,.T.); +#12102 = EDGE_CURVE('',#12095,#12103,#12105,.T.); +#12103 = VERTEX_POINT('',#12104); +#12104 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#12105 = LINE('',#12106,#12107); +#12106 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12107 = VECTOR('',#12108,1.); +#12108 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12109 = ORIENTED_EDGE('',*,*,#12110,.T.); +#12110 = EDGE_CURVE('',#12103,#12023,#12111,.T.); +#12111 = LINE('',#12112,#12113); +#12112 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#12113 = VECTOR('',#12114,1.); +#12114 = DIRECTION('',(0.,0.,1.)); +#12115 = ORIENTED_EDGE('',*,*,#12020,.F.); +#12116 = ORIENTED_EDGE('',*,*,#12117,.T.); +#12117 = EDGE_CURVE('',#12021,#12093,#12118,.T.); +#12118 = LINE('',#12119,#12120); +#12119 = CARTESIAN_POINT('',(0.775,0.5,4.425)); +#12120 = VECTOR('',#12121,1.); +#12121 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#12122 = PLANE('',#12123); +#12123 = AXIS2_PLACEMENT_3D('',#12124,#12125,#12126); +#12124 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12125 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12126 = DIRECTION('',(0.,-0.,1.)); +#12127 = ADVANCED_FACE('',(#12128),#12146,.F.); +#12128 = FACE_BOUND('',#12129,.T.); +#12129 = EDGE_LOOP('',(#12130,#12131,#12132,#12140)); +#12130 = ORIENTED_EDGE('',*,*,#12117,.F.); +#12131 = ORIENTED_EDGE('',*,*,#12078,.T.); +#12132 = ORIENTED_EDGE('',*,*,#12133,.T.); +#12133 = EDGE_CURVE('',#12071,#12134,#12136,.T.); +#12134 = VERTEX_POINT('',#12135); +#12135 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#12136 = LINE('',#12137,#12138); +#12137 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#12138 = VECTOR('',#12139,1.); +#12139 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#12140 = ORIENTED_EDGE('',*,*,#12141,.F.); +#12141 = EDGE_CURVE('',#12093,#12134,#12142,.T.); +#12142 = LINE('',#12143,#12144); +#12143 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#12144 = VECTOR('',#12145,1.); +#12145 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12146 = PLANE('',#12147); +#12147 = AXIS2_PLACEMENT_3D('',#12148,#12149,#12150); +#12148 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#12149 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#12150 = DIRECTION('',(1.224646799147E-16,1.,-2.103984282776E-29)); +#12151 = ADVANCED_FACE('',(#12152),#12211,.F.); +#12152 = FACE_BOUND('',#12153,.F.); +#12153 = EDGE_LOOP('',(#12154,#12164,#12172,#12180,#12188,#12197,#12203, + #12204,#12205)); +#12154 = ORIENTED_EDGE('',*,*,#12155,.F.); +#12155 = EDGE_CURVE('',#12156,#12158,#12160,.T.); +#12156 = VERTEX_POINT('',#12157); +#12157 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12158 = VERTEX_POINT('',#12159); +#12159 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12160 = LINE('',#12161,#12162); +#12161 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12162 = VECTOR('',#12163,1.); +#12163 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12164 = ORIENTED_EDGE('',*,*,#12165,.T.); +#12165 = EDGE_CURVE('',#12156,#12166,#12168,.T.); +#12166 = VERTEX_POINT('',#12167); +#12167 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#12168 = LINE('',#12169,#12170); +#12169 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12170 = VECTOR('',#12171,1.); +#12171 = DIRECTION('',(0.,0.,1.)); +#12172 = ORIENTED_EDGE('',*,*,#12173,.T.); +#12173 = EDGE_CURVE('',#12166,#12174,#12176,.T.); +#12174 = VERTEX_POINT('',#12175); +#12175 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#12176 = LINE('',#12177,#12178); +#12177 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#12178 = VECTOR('',#12179,1.); +#12179 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12180 = ORIENTED_EDGE('',*,*,#12181,.T.); +#12181 = EDGE_CURVE('',#12174,#12182,#12184,.T.); +#12182 = VERTEX_POINT('',#12183); +#12183 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#12184 = LINE('',#12185,#12186); +#12185 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#12186 = VECTOR('',#12187,1.); +#12187 = DIRECTION('',(-0.,0.,-1.)); +#12188 = ORIENTED_EDGE('',*,*,#12189,.F.); +#12189 = EDGE_CURVE('',#12190,#12182,#12192,.T.); +#12190 = VERTEX_POINT('',#12191); +#12191 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#12192 = CIRCLE('',#12193,0.5); +#12193 = AXIS2_PLACEMENT_3D('',#12194,#12195,#12196); +#12194 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#12195 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12196 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12197 = ORIENTED_EDGE('',*,*,#12198,.T.); +#12198 = EDGE_CURVE('',#12190,#12103,#12199,.T.); +#12199 = LINE('',#12200,#12201); +#12200 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#12201 = VECTOR('',#12202,1.); +#12202 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12203 = ORIENTED_EDGE('',*,*,#12110,.T.); +#12204 = ORIENTED_EDGE('',*,*,#12030,.T.); +#12205 = ORIENTED_EDGE('',*,*,#12206,.F.); +#12206 = EDGE_CURVE('',#12158,#12031,#12207,.T.); +#12207 = LINE('',#12208,#12209); +#12208 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12209 = VECTOR('',#12210,1.); +#12210 = DIRECTION('',(0.,0.,1.)); +#12211 = PLANE('',#12212); +#12212 = AXIS2_PLACEMENT_3D('',#12213,#12214,#12215); +#12213 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12214 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12215 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12216 = ADVANCED_FACE('',(#12217),#12235,.F.); +#12217 = FACE_BOUND('',#12218,.T.); +#12218 = EDGE_LOOP('',(#12219,#12220,#12221,#12229)); +#12219 = ORIENTED_EDGE('',*,*,#12133,.F.); +#12220 = ORIENTED_EDGE('',*,*,#12070,.T.); +#12221 = ORIENTED_EDGE('',*,*,#12222,.T.); +#12222 = EDGE_CURVE('',#12063,#12223,#12225,.T.); +#12223 = VERTEX_POINT('',#12224); +#12224 = CARTESIAN_POINT('',(4.1,-2.65,6.8)); +#12225 = LINE('',#12226,#12227); +#12226 = CARTESIAN_POINT('',(3.216666666667,-1.766666666667, + 5.916666666667)); +#12227 = VECTOR('',#12228,1.); +#12228 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#12229 = ORIENTED_EDGE('',*,*,#12230,.F.); +#12230 = EDGE_CURVE('',#12134,#12223,#12231,.T.); +#12231 = LINE('',#12232,#12233); +#12232 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#12233 = VECTOR('',#12234,1.); +#12234 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12235 = PLANE('',#12236); +#12236 = AXIS2_PLACEMENT_3D('',#12237,#12238,#12239); +#12237 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#12238 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#12239 = DIRECTION('',(-1.,1.224646799147E-16,-2.105273685727E-29)); +#12240 = ADVANCED_FACE('',(#12241),#12323,.F.); +#12241 = FACE_BOUND('',#12242,.F.); +#12242 = EDGE_LOOP('',(#12243,#12251,#12252,#12253,#12261,#12269,#12277, + #12285,#12293,#12301,#12309,#12317)); +#12243 = ORIENTED_EDGE('',*,*,#12244,.F.); +#12244 = EDGE_CURVE('',#12158,#12245,#12247,.T.); +#12245 = VERTEX_POINT('',#12246); +#12246 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#12247 = LINE('',#12248,#12249); +#12248 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12249 = VECTOR('',#12250,1.); +#12250 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12251 = ORIENTED_EDGE('',*,*,#12206,.T.); +#12252 = ORIENTED_EDGE('',*,*,#12038,.T.); +#12253 = ORIENTED_EDGE('',*,*,#12254,.F.); +#12254 = EDGE_CURVE('',#12255,#12039,#12257,.T.); +#12255 = VERTEX_POINT('',#12256); +#12256 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12257 = LINE('',#12258,#12259); +#12258 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12259 = VECTOR('',#12260,1.); +#12260 = DIRECTION('',(0.,0.,1.)); +#12261 = ORIENTED_EDGE('',*,*,#12262,.F.); +#12262 = EDGE_CURVE('',#12263,#12255,#12265,.T.); +#12263 = VERTEX_POINT('',#12264); +#12264 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#12265 = LINE('',#12266,#12267); +#12266 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12267 = VECTOR('',#12268,1.); +#12268 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12269 = ORIENTED_EDGE('',*,*,#12270,.F.); +#12270 = EDGE_CURVE('',#12271,#12263,#12273,.T.); +#12271 = VERTEX_POINT('',#12272); +#12272 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#12273 = LINE('',#12274,#12275); +#12274 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#12275 = VECTOR('',#12276,1.); +#12276 = DIRECTION('',(-0.,0.,-1.)); +#12277 = ORIENTED_EDGE('',*,*,#12278,.T.); +#12278 = EDGE_CURVE('',#12271,#12279,#12281,.T.); +#12279 = VERTEX_POINT('',#12280); +#12280 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#12281 = LINE('',#12282,#12283); +#12282 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#12283 = VECTOR('',#12284,1.); +#12284 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12285 = ORIENTED_EDGE('',*,*,#12286,.T.); +#12286 = EDGE_CURVE('',#12279,#12287,#12289,.T.); +#12287 = VERTEX_POINT('',#12288); +#12288 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#12289 = LINE('',#12290,#12291); +#12290 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#12291 = VECTOR('',#12292,1.); +#12292 = DIRECTION('',(-0.,0.,-1.)); +#12293 = ORIENTED_EDGE('',*,*,#12294,.F.); +#12294 = EDGE_CURVE('',#12295,#12287,#12297,.T.); +#12295 = VERTEX_POINT('',#12296); +#12296 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#12297 = LINE('',#12298,#12299); +#12298 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12299 = VECTOR('',#12300,1.); +#12300 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12301 = ORIENTED_EDGE('',*,*,#12302,.F.); +#12302 = EDGE_CURVE('',#12303,#12295,#12305,.T.); +#12303 = VERTEX_POINT('',#12304); +#12304 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#12305 = LINE('',#12306,#12307); +#12306 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#12307 = VECTOR('',#12308,1.); +#12308 = DIRECTION('',(-0.,0.,-1.)); +#12309 = ORIENTED_EDGE('',*,*,#12310,.T.); +#12310 = EDGE_CURVE('',#12303,#12311,#12313,.T.); +#12311 = VERTEX_POINT('',#12312); +#12312 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#12313 = LINE('',#12314,#12315); +#12314 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#12315 = VECTOR('',#12316,1.); +#12316 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12317 = ORIENTED_EDGE('',*,*,#12318,.T.); +#12318 = EDGE_CURVE('',#12311,#12245,#12319,.T.); +#12319 = LINE('',#12320,#12321); +#12320 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#12321 = VECTOR('',#12322,1.); +#12322 = DIRECTION('',(-0.,0.,-1.)); +#12323 = PLANE('',#12324); +#12324 = AXIS2_PLACEMENT_3D('',#12325,#12326,#12327); +#12325 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12326 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12327 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12328 = ADVANCED_FACE('',(#12329),#12347,.F.); +#12329 = FACE_BOUND('',#12330,.T.); +#12330 = EDGE_LOOP('',(#12331,#12332,#12333,#12341)); +#12331 = ORIENTED_EDGE('',*,*,#12222,.F.); +#12332 = ORIENTED_EDGE('',*,*,#12062,.T.); +#12333 = ORIENTED_EDGE('',*,*,#12334,.T.); +#12334 = EDGE_CURVE('',#12055,#12335,#12337,.T.); +#12335 = VERTEX_POINT('',#12336); +#12336 = CARTESIAN_POINT('',(4.1,0.5,6.8)); +#12337 = LINE('',#12338,#12339); +#12338 = CARTESIAN_POINT('',(3.575,0.5,6.275)); +#12339 = VECTOR('',#12340,1.); +#12340 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#12341 = ORIENTED_EDGE('',*,*,#12342,.F.); +#12342 = EDGE_CURVE('',#12223,#12335,#12343,.T.); +#12343 = LINE('',#12344,#12345); +#12344 = CARTESIAN_POINT('',(4.1,-2.65,6.8)); +#12345 = VECTOR('',#12346,1.); +#12346 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12347 = PLANE('',#12348); +#12348 = AXIS2_PLACEMENT_3D('',#12349,#12350,#12351); +#12349 = CARTESIAN_POINT('',(4.2,-2.65,6.9)); +#12350 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#12351 = DIRECTION('',(-1.224646799147E-16,-1.,-2.103984282776E-29)); +#12352 = ADVANCED_FACE('',(#12353),#12412,.F.); +#12353 = FACE_BOUND('',#12354,.F.); +#12354 = EDGE_LOOP('',(#12355,#12363,#12364,#12365,#12373,#12381,#12390, + #12398,#12406)); +#12355 = ORIENTED_EDGE('',*,*,#12356,.F.); +#12356 = EDGE_CURVE('',#12255,#12357,#12359,.T.); +#12357 = VERTEX_POINT('',#12358); +#12358 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12359 = LINE('',#12360,#12361); +#12360 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12361 = VECTOR('',#12362,1.); +#12362 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12363 = ORIENTED_EDGE('',*,*,#12254,.T.); +#12364 = ORIENTED_EDGE('',*,*,#12046,.T.); +#12365 = ORIENTED_EDGE('',*,*,#12366,.F.); +#12366 = EDGE_CURVE('',#12367,#12047,#12369,.T.); +#12367 = VERTEX_POINT('',#12368); +#12368 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12369 = LINE('',#12370,#12371); +#12370 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12371 = VECTOR('',#12372,1.); +#12372 = DIRECTION('',(0.,0.,1.)); +#12373 = ORIENTED_EDGE('',*,*,#12374,.F.); +#12374 = EDGE_CURVE('',#12375,#12367,#12377,.T.); +#12375 = VERTEX_POINT('',#12376); +#12376 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12377 = LINE('',#12378,#12379); +#12378 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12379 = VECTOR('',#12380,1.); +#12380 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12381 = ORIENTED_EDGE('',*,*,#12382,.F.); +#12382 = EDGE_CURVE('',#12383,#12375,#12385,.T.); +#12383 = VERTEX_POINT('',#12384); +#12384 = CARTESIAN_POINT('',(4.95,1.5,4.15)); +#12385 = CIRCLE('',#12386,0.5); +#12386 = AXIS2_PLACEMENT_3D('',#12387,#12388,#12389); +#12387 = CARTESIAN_POINT('',(4.95,1.,4.15)); +#12388 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12389 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12390 = ORIENTED_EDGE('',*,*,#12391,.F.); +#12391 = EDGE_CURVE('',#12392,#12383,#12394,.T.); +#12392 = VERTEX_POINT('',#12393); +#12393 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12394 = LINE('',#12395,#12396); +#12395 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12396 = VECTOR('',#12397,1.); +#12397 = DIRECTION('',(-0.,0.,-1.)); +#12398 = ORIENTED_EDGE('',*,*,#12399,.T.); +#12399 = EDGE_CURVE('',#12392,#12400,#12402,.T.); +#12400 = VERTEX_POINT('',#12401); +#12401 = CARTESIAN_POINT('',(4.95,2.35,7.)); +#12402 = LINE('',#12403,#12404); +#12403 = CARTESIAN_POINT('',(4.95,-3.4,7.)); +#12404 = VECTOR('',#12405,1.); +#12405 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12406 = ORIENTED_EDGE('',*,*,#12407,.F.); +#12407 = EDGE_CURVE('',#12357,#12400,#12408,.T.); +#12408 = LINE('',#12409,#12410); +#12409 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12410 = VECTOR('',#12411,1.); +#12411 = DIRECTION('',(0.,0.,1.)); +#12412 = PLANE('',#12413); +#12413 = AXIS2_PLACEMENT_3D('',#12414,#12415,#12416); +#12414 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12415 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12416 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12417 = ADVANCED_FACE('',(#12418),#12437,.T.); +#12418 = FACE_BOUND('',#12419,.T.); +#12419 = EDGE_LOOP('',(#12420,#12421,#12422,#12430,#12436)); +#12420 = ORIENTED_EDGE('',*,*,#12054,.F.); +#12421 = ORIENTED_EDGE('',*,*,#12366,.F.); +#12422 = ORIENTED_EDGE('',*,*,#12423,.T.); +#12423 = EDGE_CURVE('',#12367,#12424,#12426,.T.); +#12424 = VERTEX_POINT('',#12425); +#12425 = CARTESIAN_POINT('',(4.1,0.5,3.65)); +#12426 = LINE('',#12427,#12428); +#12427 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12428 = VECTOR('',#12429,1.); +#12429 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12430 = ORIENTED_EDGE('',*,*,#12431,.T.); +#12431 = EDGE_CURVE('',#12424,#12335,#12432,.T.); +#12432 = LINE('',#12433,#12434); +#12433 = CARTESIAN_POINT('',(4.1,0.5,5.325)); +#12434 = VECTOR('',#12435,1.); +#12435 = DIRECTION('',(0.,0.,1.)); +#12436 = ORIENTED_EDGE('',*,*,#12334,.F.); +#12437 = PLANE('',#12438); +#12438 = AXIS2_PLACEMENT_3D('',#12439,#12440,#12441); +#12439 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12440 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12441 = DIRECTION('',(0.,-0.,1.)); +#12442 = ADVANCED_FACE('',(#12443),#12486,.F.); +#12443 = FACE_BOUND('',#12444,.F.); +#12444 = EDGE_LOOP('',(#12445,#12446,#12454,#12463,#12471,#12479,#12485) + ); +#12445 = ORIENTED_EDGE('',*,*,#12092,.T.); +#12446 = ORIENTED_EDGE('',*,*,#12447,.T.); +#12447 = EDGE_CURVE('',#12095,#12448,#12450,.T.); +#12448 = VERTEX_POINT('',#12449); +#12449 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#12450 = LINE('',#12451,#12452); +#12451 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#12452 = VECTOR('',#12453,1.); +#12453 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12454 = ORIENTED_EDGE('',*,*,#12455,.T.); +#12455 = EDGE_CURVE('',#12448,#12456,#12458,.T.); +#12456 = VERTEX_POINT('',#12457); +#12457 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#12458 = CIRCLE('',#12459,0.5); +#12459 = AXIS2_PLACEMENT_3D('',#12460,#12461,#12462); +#12460 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#12461 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12462 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12463 = ORIENTED_EDGE('',*,*,#12464,.T.); +#12464 = EDGE_CURVE('',#12456,#12465,#12467,.T.); +#12465 = VERTEX_POINT('',#12466); +#12466 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#12467 = LINE('',#12468,#12469); +#12468 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#12469 = VECTOR('',#12470,1.); +#12470 = DIRECTION('',(0.,0.,-1.)); +#12471 = ORIENTED_EDGE('',*,*,#12472,.T.); +#12472 = EDGE_CURVE('',#12465,#12473,#12475,.T.); +#12473 = VERTEX_POINT('',#12474); +#12474 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#12475 = LINE('',#12476,#12477); +#12476 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#12477 = VECTOR('',#12478,1.); +#12478 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12479 = ORIENTED_EDGE('',*,*,#12480,.F.); +#12480 = EDGE_CURVE('',#12134,#12473,#12481,.T.); +#12481 = LINE('',#12482,#12483); +#12482 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#12483 = VECTOR('',#12484,1.); +#12484 = DIRECTION('',(0.,0.,-1.)); +#12485 = ORIENTED_EDGE('',*,*,#12141,.F.); +#12486 = PLANE('',#12487); +#12487 = AXIS2_PLACEMENT_3D('',#12488,#12489,#12490); +#12488 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#12489 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12490 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12491 = ADVANCED_FACE('',(#12492),#12503,.T.); +#12492 = FACE_BOUND('',#12493,.T.); +#12493 = EDGE_LOOP('',(#12494,#12495,#12501,#12502)); +#12494 = ORIENTED_EDGE('',*,*,#12447,.T.); +#12495 = ORIENTED_EDGE('',*,*,#12496,.T.); +#12496 = EDGE_CURVE('',#12448,#12190,#12497,.T.); +#12497 = LINE('',#12498,#12499); +#12498 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12499 = VECTOR('',#12500,1.); +#12500 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12501 = ORIENTED_EDGE('',*,*,#12198,.T.); +#12502 = ORIENTED_EDGE('',*,*,#12102,.F.); +#12503 = PLANE('',#12504); +#12504 = AXIS2_PLACEMENT_3D('',#12505,#12506,#12507); +#12505 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12506 = DIRECTION('',(0.,0.,1.)); +#12507 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12508 = ADVANCED_FACE('',(#12509),#12527,.F.); +#12509 = FACE_BOUND('',#12510,.F.); +#12510 = EDGE_LOOP('',(#12511,#12512,#12520,#12526)); +#12511 = ORIENTED_EDGE('',*,*,#12244,.T.); +#12512 = ORIENTED_EDGE('',*,*,#12513,.T.); +#12513 = EDGE_CURVE('',#12245,#12514,#12516,.T.); +#12514 = VERTEX_POINT('',#12515); +#12515 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#12516 = LINE('',#12517,#12518); +#12517 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#12518 = VECTOR('',#12519,1.); +#12519 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12520 = ORIENTED_EDGE('',*,*,#12521,.T.); +#12521 = EDGE_CURVE('',#12514,#12156,#12522,.T.); +#12522 = LINE('',#12523,#12524); +#12523 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12524 = VECTOR('',#12525,1.); +#12525 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12526 = ORIENTED_EDGE('',*,*,#12155,.T.); +#12527 = PLANE('',#12528); +#12528 = AXIS2_PLACEMENT_3D('',#12529,#12530,#12531); +#12529 = CARTESIAN_POINT('',(1.25,-0.525,0.)); +#12530 = DIRECTION('',(0.,0.,1.)); +#12531 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12532 = ADVANCED_FACE('',(#12533),#12544,.F.); +#12533 = FACE_BOUND('',#12534,.F.); +#12534 = EDGE_LOOP('',(#12535,#12536,#12537,#12543)); +#12535 = ORIENTED_EDGE('',*,*,#12496,.T.); +#12536 = ORIENTED_EDGE('',*,*,#12189,.T.); +#12537 = ORIENTED_EDGE('',*,*,#12538,.F.); +#12538 = EDGE_CURVE('',#12456,#12182,#12539,.T.); +#12539 = LINE('',#12540,#12541); +#12540 = CARTESIAN_POINT('',(4.95,1.5,4.15)); +#12541 = VECTOR('',#12542,1.); +#12542 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12543 = ORIENTED_EDGE('',*,*,#12455,.F.); +#12544 = CYLINDRICAL_SURFACE('',#12545,0.5); +#12545 = AXIS2_PLACEMENT_3D('',#12546,#12547,#12548); +#12546 = CARTESIAN_POINT('',(4.95,1.,4.15)); +#12547 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#12548 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12549 = ADVANCED_FACE('',(#12550),#12682,.T.); +#12550 = FACE_BOUND('',#12551,.T.); +#12551 = EDGE_LOOP('',(#12552,#12553,#12561,#12569,#12577,#12585,#12593, + #12602,#12610,#12619,#12627,#12635,#12643,#12651,#12657,#12658, + #12659,#12660,#12668,#12676)); +#12552 = ORIENTED_EDGE('',*,*,#12391,.F.); +#12553 = ORIENTED_EDGE('',*,*,#12554,.T.); +#12554 = EDGE_CURVE('',#12392,#12555,#12557,.T.); +#12555 = VERTEX_POINT('',#12556); +#12556 = CARTESIAN_POINT('',(3.,1.5,7.)); +#12557 = LINE('',#12558,#12559); +#12558 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12559 = VECTOR('',#12560,1.); +#12560 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12561 = ORIENTED_EDGE('',*,*,#12562,.T.); +#12562 = EDGE_CURVE('',#12555,#12563,#12565,.T.); +#12563 = VERTEX_POINT('',#12564); +#12564 = CARTESIAN_POINT('',(3.,1.5,6.1)); +#12565 = LINE('',#12566,#12567); +#12566 = CARTESIAN_POINT('',(3.,1.5,5.340388446215)); +#12567 = VECTOR('',#12568,1.); +#12568 = DIRECTION('',(-2.467162276945E-16,8.387236609414E-17,-1.)); +#12569 = ORIENTED_EDGE('',*,*,#12570,.T.); +#12570 = EDGE_CURVE('',#12563,#12571,#12573,.T.); +#12571 = VERTEX_POINT('',#12572); +#12572 = CARTESIAN_POINT('',(2.75,1.5,5.85)); +#12573 = LINE('',#12574,#12575); +#12574 = CARTESIAN_POINT('',(2.057694223108,1.5,5.157694223108)); +#12575 = VECTOR('',#12576,1.); +#12576 = DIRECTION('',(-0.707106781187,1.459023244428E-16, + -0.707106781187)); +#12577 = ORIENTED_EDGE('',*,*,#12578,.T.); +#12578 = EDGE_CURVE('',#12571,#12579,#12581,.T.); +#12579 = VERTEX_POINT('',#12580); +#12580 = CARTESIAN_POINT('',(3.,1.5,5.6)); +#12581 = LINE('',#12582,#12583); +#12582 = CARTESIAN_POINT('',(2.817305776892,1.5,5.782694223108)); +#12583 = VECTOR('',#12584,1.); +#12584 = DIRECTION('',(0.707106781187,-2.72888868042E-17,-0.707106781187 + )); +#12585 = ORIENTED_EDGE('',*,*,#12586,.T.); +#12586 = EDGE_CURVE('',#12579,#12587,#12589,.T.); +#12587 = VERTEX_POINT('',#12588); +#12588 = CARTESIAN_POINT('',(3.,1.5,3.85)); +#12589 = LINE('',#12590,#12591); +#12590 = CARTESIAN_POINT('',(3.,1.5,3.840388446215)); +#12591 = VECTOR('',#12592,1.); +#12592 = DIRECTION('',(1.027140246741E-32,8.387236609414E-17,-1.)); +#12593 = ORIENTED_EDGE('',*,*,#12594,.F.); +#12594 = EDGE_CURVE('',#12595,#12587,#12597,.T.); +#12595 = VERTEX_POINT('',#12596); +#12596 = CARTESIAN_POINT('',(2.25,1.5,3.1)); +#12597 = CIRCLE('',#12598,0.75); +#12598 = AXIS2_PLACEMENT_3D('',#12599,#12600,#12601); +#12599 = CARTESIAN_POINT('',(2.25,1.5,3.85)); +#12600 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12601 = DIRECTION('',(-0.,0.,-1.)); +#12602 = ORIENTED_EDGE('',*,*,#12603,.F.); +#12603 = EDGE_CURVE('',#12604,#12595,#12606,.T.); +#12604 = VERTEX_POINT('',#12605); +#12605 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#12606 = LINE('',#12607,#12608); +#12607 = CARTESIAN_POINT('',(1.25,1.5,3.1)); +#12608 = VECTOR('',#12609,1.); +#12609 = DIRECTION('',(1.,-1.224646799147E-16,6.189508478766E-63)); +#12610 = ORIENTED_EDGE('',*,*,#12611,.F.); +#12611 = EDGE_CURVE('',#12612,#12604,#12614,.T.); +#12612 = VERTEX_POINT('',#12613); +#12613 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#12614 = CIRCLE('',#12615,0.75); +#12615 = AXIS2_PLACEMENT_3D('',#12616,#12617,#12618); +#12616 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#12617 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12618 = DIRECTION('',(-0.,0.,-1.)); +#12619 = ORIENTED_EDGE('',*,*,#12620,.F.); +#12620 = EDGE_CURVE('',#12621,#12612,#12623,.T.); +#12621 = VERTEX_POINT('',#12622); +#12622 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#12623 = LINE('',#12624,#12625); +#12624 = CARTESIAN_POINT('',(-0.5,1.5,3.840388446215)); +#12625 = VECTOR('',#12626,1.); +#12626 = DIRECTION('',(1.027140246741E-32,8.387236609414E-17,-1.)); +#12627 = ORIENTED_EDGE('',*,*,#12628,.F.); +#12628 = EDGE_CURVE('',#12629,#12621,#12631,.T.); +#12629 = VERTEX_POINT('',#12630); +#12630 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#12631 = LINE('',#12632,#12633); +#12632 = CARTESIAN_POINT('',(-0.317305776892,1.5,5.782694223108)); +#12633 = VECTOR('',#12634,1.); +#12634 = DIRECTION('',(-0.707106781187,1.459023244428E-16, + -0.707106781187)); +#12635 = ORIENTED_EDGE('',*,*,#12636,.F.); +#12636 = EDGE_CURVE('',#12637,#12629,#12639,.T.); +#12637 = VERTEX_POINT('',#12638); +#12638 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#12639 = LINE('',#12640,#12641); +#12640 = CARTESIAN_POINT('',(0.442305776892,1.5,5.157694223108)); +#12641 = VECTOR('',#12642,1.); +#12642 = DIRECTION('',(0.707106781187,-2.72888868042E-17,-0.707106781187 + )); +#12643 = ORIENTED_EDGE('',*,*,#12644,.F.); +#12644 = EDGE_CURVE('',#12645,#12637,#12647,.T.); +#12645 = VERTEX_POINT('',#12646); +#12646 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#12647 = LINE('',#12648,#12649); +#12648 = CARTESIAN_POINT('',(-0.5,1.5,5.340388446215)); +#12649 = VECTOR('',#12650,1.); +#12650 = DIRECTION('',(1.027140246741E-32,8.387236609414E-17,-1.)); +#12651 = ORIENTED_EDGE('',*,*,#12652,.T.); +#12652 = EDGE_CURVE('',#12645,#12174,#12653,.T.); +#12653 = LINE('',#12654,#12655); +#12654 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12655 = VECTOR('',#12656,1.); +#12656 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12657 = ORIENTED_EDGE('',*,*,#12181,.T.); +#12658 = ORIENTED_EDGE('',*,*,#12538,.F.); +#12659 = ORIENTED_EDGE('',*,*,#12464,.T.); +#12660 = ORIENTED_EDGE('',*,*,#12661,.F.); +#12661 = EDGE_CURVE('',#12662,#12465,#12664,.T.); +#12662 = VERTEX_POINT('',#12663); +#12663 = CARTESIAN_POINT('',(4.1,1.5,1.85)); +#12664 = LINE('',#12665,#12666); +#12665 = CARTESIAN_POINT('',(4.1,1.5,1.85)); +#12666 = VECTOR('',#12667,1.); +#12667 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12668 = ORIENTED_EDGE('',*,*,#12669,.F.); +#12669 = EDGE_CURVE('',#12670,#12662,#12672,.T.); +#12670 = VERTEX_POINT('',#12671); +#12671 = CARTESIAN_POINT('',(4.1,1.5,4.15)); +#12672 = LINE('',#12673,#12674); +#12673 = CARTESIAN_POINT('',(4.1,1.5,7.)); +#12674 = VECTOR('',#12675,1.); +#12675 = DIRECTION('',(0.,0.,-1.)); +#12676 = ORIENTED_EDGE('',*,*,#12677,.F.); +#12677 = EDGE_CURVE('',#12383,#12670,#12678,.T.); +#12678 = LINE('',#12679,#12680); +#12679 = CARTESIAN_POINT('',(4.95,1.5,4.15)); +#12680 = VECTOR('',#12681,1.); +#12681 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12682 = PLANE('',#12683); +#12683 = AXIS2_PLACEMENT_3D('',#12684,#12685,#12686); +#12684 = CARTESIAN_POINT('',(1.25,1.5,4.58077689243)); +#12685 = DIRECTION('',(-1.224646799147E-16,-1.,-8.387236609414E-17)); +#12686 = DIRECTION('',(-1.027140246741E-32,-8.387236609414E-17,1.)); +#12687 = ADVANCED_FACE('',(#12688),#12706,.T.); +#12688 = FACE_BOUND('',#12689,.T.); +#12689 = EDGE_LOOP('',(#12690,#12691,#12699,#12705)); +#12690 = ORIENTED_EDGE('',*,*,#12652,.F.); +#12691 = ORIENTED_EDGE('',*,*,#12692,.F.); +#12692 = EDGE_CURVE('',#12693,#12645,#12695,.T.); +#12693 = VERTEX_POINT('',#12694); +#12694 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#12695 = LINE('',#12696,#12697); +#12696 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#12697 = VECTOR('',#12698,1.); +#12698 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12699 = ORIENTED_EDGE('',*,*,#12700,.T.); +#12700 = EDGE_CURVE('',#12693,#12166,#12701,.T.); +#12701 = LINE('',#12702,#12703); +#12702 = CARTESIAN_POINT('',(4.95,2.35,7.)); +#12703 = VECTOR('',#12704,1.); +#12704 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12705 = ORIENTED_EDGE('',*,*,#12173,.T.); +#12706 = PLANE('',#12707); +#12707 = AXIS2_PLACEMENT_3D('',#12708,#12709,#12710); +#12708 = CARTESIAN_POINT('',(1.25,-0.525,7.)); +#12709 = DIRECTION('',(0.,0.,1.)); +#12710 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12711 = ADVANCED_FACE('',(#12712),#12876,.F.); +#12712 = FACE_BOUND('',#12713,.F.); +#12713 = EDGE_LOOP('',(#12714,#12722,#12723,#12731,#12739,#12747,#12755, + #12763,#12772,#12780,#12789,#12797,#12805,#12813,#12819,#12820, + #12821,#12822,#12830,#12838,#12846,#12854,#12862,#12870)); +#12714 = ORIENTED_EDGE('',*,*,#12715,.F.); +#12715 = EDGE_CURVE('',#12357,#12716,#12718,.T.); +#12716 = VERTEX_POINT('',#12717); +#12717 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#12718 = LINE('',#12719,#12720); +#12719 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12720 = VECTOR('',#12721,1.); +#12721 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12722 = ORIENTED_EDGE('',*,*,#12407,.T.); +#12723 = ORIENTED_EDGE('',*,*,#12724,.T.); +#12724 = EDGE_CURVE('',#12400,#12725,#12727,.T.); +#12725 = VERTEX_POINT('',#12726); +#12726 = CARTESIAN_POINT('',(3.,2.35,7.)); +#12727 = LINE('',#12728,#12729); +#12728 = CARTESIAN_POINT('',(4.95,2.35,7.)); +#12729 = VECTOR('',#12730,1.); +#12730 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12731 = ORIENTED_EDGE('',*,*,#12732,.F.); +#12732 = EDGE_CURVE('',#12733,#12725,#12735,.T.); +#12733 = VERTEX_POINT('',#12734); +#12734 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#12735 = LINE('',#12736,#12737); +#12736 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#12737 = VECTOR('',#12738,1.); +#12738 = DIRECTION('',(2.467162276945E-16,-3.021402385438E-32,1.)); +#12739 = ORIENTED_EDGE('',*,*,#12740,.F.); +#12740 = EDGE_CURVE('',#12741,#12733,#12743,.T.); +#12741 = VERTEX_POINT('',#12742); +#12742 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#12743 = LINE('',#12744,#12745); +#12744 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#12745 = VECTOR('',#12746,1.); +#12746 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#12747 = ORIENTED_EDGE('',*,*,#12748,.F.); +#12748 = EDGE_CURVE('',#12749,#12741,#12751,.T.); +#12749 = VERTEX_POINT('',#12750); +#12750 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#12751 = LINE('',#12752,#12753); +#12752 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#12753 = VECTOR('',#12754,1.); +#12754 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#12755 = ORIENTED_EDGE('',*,*,#12756,.F.); +#12756 = EDGE_CURVE('',#12757,#12749,#12759,.T.); +#12757 = VERTEX_POINT('',#12758); +#12758 = CARTESIAN_POINT('',(3.,2.35,3.85)); +#12759 = LINE('',#12760,#12761); +#12760 = CARTESIAN_POINT('',(3.,2.35,3.1)); +#12761 = VECTOR('',#12762,1.); +#12762 = DIRECTION('',(0.,0.,1.)); +#12763 = ORIENTED_EDGE('',*,*,#12764,.F.); +#12764 = EDGE_CURVE('',#12765,#12757,#12767,.T.); +#12765 = VERTEX_POINT('',#12766); +#12766 = CARTESIAN_POINT('',(2.25,2.35,3.1)); +#12767 = CIRCLE('',#12768,0.75); +#12768 = AXIS2_PLACEMENT_3D('',#12769,#12770,#12771); +#12769 = CARTESIAN_POINT('',(2.25,2.35,3.85)); +#12770 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12771 = DIRECTION('',(0.,0.,1.)); +#12772 = ORIENTED_EDGE('',*,*,#12773,.F.); +#12773 = EDGE_CURVE('',#12774,#12765,#12776,.T.); +#12774 = VERTEX_POINT('',#12775); +#12775 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#12776 = LINE('',#12777,#12778); +#12777 = CARTESIAN_POINT('',(1.25,2.35,3.1)); +#12778 = VECTOR('',#12779,1.); +#12779 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12780 = ORIENTED_EDGE('',*,*,#12781,.T.); +#12781 = EDGE_CURVE('',#12774,#12782,#12784,.T.); +#12782 = VERTEX_POINT('',#12783); +#12783 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#12784 = CIRCLE('',#12785,0.75); +#12785 = AXIS2_PLACEMENT_3D('',#12786,#12787,#12788); +#12786 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#12787 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#12788 = DIRECTION('',(0.,0.,1.)); +#12789 = ORIENTED_EDGE('',*,*,#12790,.T.); +#12790 = EDGE_CURVE('',#12782,#12791,#12793,.T.); +#12791 = VERTEX_POINT('',#12792); +#12792 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#12793 = LINE('',#12794,#12795); +#12794 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#12795 = VECTOR('',#12796,1.); +#12796 = DIRECTION('',(0.,0.,1.)); +#12797 = ORIENTED_EDGE('',*,*,#12798,.T.); +#12798 = EDGE_CURVE('',#12791,#12799,#12801,.T.); +#12799 = VERTEX_POINT('',#12800); +#12800 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#12801 = LINE('',#12802,#12803); +#12802 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#12803 = VECTOR('',#12804,1.); +#12804 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#12805 = ORIENTED_EDGE('',*,*,#12806,.T.); +#12806 = EDGE_CURVE('',#12799,#12807,#12809,.T.); +#12807 = VERTEX_POINT('',#12808); +#12808 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#12809 = LINE('',#12810,#12811); +#12810 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#12811 = VECTOR('',#12812,1.); +#12812 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#12813 = ORIENTED_EDGE('',*,*,#12814,.T.); +#12814 = EDGE_CURVE('',#12807,#12693,#12815,.T.); +#12815 = LINE('',#12816,#12817); +#12816 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#12817 = VECTOR('',#12818,1.); +#12818 = DIRECTION('',(0.,0.,1.)); +#12819 = ORIENTED_EDGE('',*,*,#12700,.T.); +#12820 = ORIENTED_EDGE('',*,*,#12165,.F.); +#12821 = ORIENTED_EDGE('',*,*,#12521,.F.); +#12822 = ORIENTED_EDGE('',*,*,#12823,.T.); +#12823 = EDGE_CURVE('',#12514,#12824,#12826,.T.); +#12824 = VERTEX_POINT('',#12825); +#12825 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#12826 = LINE('',#12827,#12828); +#12827 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#12828 = VECTOR('',#12829,1.); +#12829 = DIRECTION('',(0.,0.,1.)); +#12830 = ORIENTED_EDGE('',*,*,#12831,.F.); +#12831 = EDGE_CURVE('',#12832,#12824,#12834,.T.); +#12832 = VERTEX_POINT('',#12833); +#12833 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12834 = LINE('',#12835,#12836); +#12835 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12836 = VECTOR('',#12837,1.); +#12837 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12838 = ORIENTED_EDGE('',*,*,#12839,.F.); +#12839 = EDGE_CURVE('',#12840,#12832,#12842,.T.); +#12840 = VERTEX_POINT('',#12841); +#12841 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#12842 = LINE('',#12843,#12844); +#12843 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#12844 = VECTOR('',#12845,1.); +#12845 = DIRECTION('',(0.,0.,1.)); +#12846 = ORIENTED_EDGE('',*,*,#12847,.F.); +#12847 = EDGE_CURVE('',#12848,#12840,#12850,.T.); +#12848 = VERTEX_POINT('',#12849); +#12849 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#12850 = LINE('',#12851,#12852); +#12851 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12852 = VECTOR('',#12853,1.); +#12853 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12854 = ORIENTED_EDGE('',*,*,#12855,.T.); +#12855 = EDGE_CURVE('',#12848,#12856,#12858,.T.); +#12856 = VERTEX_POINT('',#12857); +#12857 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#12858 = LINE('',#12859,#12860); +#12859 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#12860 = VECTOR('',#12861,1.); +#12861 = DIRECTION('',(0.,0.,1.)); +#12862 = ORIENTED_EDGE('',*,*,#12863,.F.); +#12863 = EDGE_CURVE('',#12864,#12856,#12866,.T.); +#12864 = VERTEX_POINT('',#12865); +#12865 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12866 = LINE('',#12867,#12868); +#12867 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12868 = VECTOR('',#12869,1.); +#12869 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12870 = ORIENTED_EDGE('',*,*,#12871,.F.); +#12871 = EDGE_CURVE('',#12716,#12864,#12872,.T.); +#12872 = LINE('',#12873,#12874); +#12873 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#12874 = VECTOR('',#12875,1.); +#12875 = DIRECTION('',(0.,0.,1.)); +#12876 = PLANE('',#12877); +#12877 = AXIS2_PLACEMENT_3D('',#12878,#12879,#12880); +#12878 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12879 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12880 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12881 = ADVANCED_FACE('',(#12882),#12900,.F.); +#12882 = FACE_BOUND('',#12883,.F.); +#12883 = EDGE_LOOP('',(#12884,#12885,#12893,#12899)); +#12884 = ORIENTED_EDGE('',*,*,#12480,.T.); +#12885 = ORIENTED_EDGE('',*,*,#12886,.T.); +#12886 = EDGE_CURVE('',#12473,#12887,#12889,.T.); +#12887 = VERTEX_POINT('',#12888); +#12888 = CARTESIAN_POINT('',(4.1,-2.65,1.85)); +#12889 = LINE('',#12890,#12891); +#12890 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#12891 = VECTOR('',#12892,1.); +#12892 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12893 = ORIENTED_EDGE('',*,*,#12894,.F.); +#12894 = EDGE_CURVE('',#12223,#12887,#12895,.T.); +#12895 = LINE('',#12896,#12897); +#12896 = CARTESIAN_POINT('',(4.1,-2.65,7.)); +#12897 = VECTOR('',#12898,1.); +#12898 = DIRECTION('',(0.,0.,-1.)); +#12899 = ORIENTED_EDGE('',*,*,#12230,.F.); +#12900 = PLANE('',#12901); +#12901 = AXIS2_PLACEMENT_3D('',#12902,#12903,#12904); +#12902 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#12903 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12904 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12905 = ADVANCED_FACE('',(#12906),#12933,.T.); +#12906 = FACE_BOUND('',#12907,.T.); +#12907 = EDGE_LOOP('',(#12908,#12909,#12917,#12925,#12931,#12932)); +#12908 = ORIENTED_EDGE('',*,*,#12823,.T.); +#12909 = ORIENTED_EDGE('',*,*,#12910,.T.); +#12910 = EDGE_CURVE('',#12824,#12911,#12913,.T.); +#12911 = VERTEX_POINT('',#12912); +#12912 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#12913 = LINE('',#12914,#12915); +#12914 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#12915 = VECTOR('',#12916,1.); +#12916 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12917 = ORIENTED_EDGE('',*,*,#12918,.T.); +#12918 = EDGE_CURVE('',#12911,#12919,#12921,.T.); +#12919 = VERTEX_POINT('',#12920); +#12920 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#12921 = LINE('',#12922,#12923); +#12922 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#12923 = VECTOR('',#12924,1.); +#12924 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12925 = ORIENTED_EDGE('',*,*,#12926,.T.); +#12926 = EDGE_CURVE('',#12919,#12311,#12927,.T.); +#12927 = LINE('',#12928,#12929); +#12928 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#12929 = VECTOR('',#12930,1.); +#12930 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12931 = ORIENTED_EDGE('',*,*,#12318,.T.); +#12932 = ORIENTED_EDGE('',*,*,#12513,.T.); +#12933 = PLANE('',#12934); +#12934 = AXIS2_PLACEMENT_3D('',#12935,#12936,#12937); +#12935 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#12936 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12937 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12938 = ADVANCED_FACE('',(#12939),#12957,.F.); +#12939 = FACE_BOUND('',#12940,.F.); +#12940 = EDGE_LOOP('',(#12941,#12949,#12950,#12951)); +#12941 = ORIENTED_EDGE('',*,*,#12942,.T.); +#12942 = EDGE_CURVE('',#12943,#12919,#12945,.T.); +#12943 = VERTEX_POINT('',#12944); +#12944 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12945 = LINE('',#12946,#12947); +#12946 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12947 = VECTOR('',#12948,1.); +#12948 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12949 = ORIENTED_EDGE('',*,*,#12926,.T.); +#12950 = ORIENTED_EDGE('',*,*,#12310,.F.); +#12951 = ORIENTED_EDGE('',*,*,#12952,.F.); +#12952 = EDGE_CURVE('',#12943,#12303,#12953,.T.); +#12953 = LINE('',#12954,#12955); +#12954 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12955 = VECTOR('',#12956,1.); +#12956 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12957 = PLANE('',#12958); +#12958 = AXIS2_PLACEMENT_3D('',#12959,#12960,#12961); +#12959 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12960 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#12961 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12962 = ADVANCED_FACE('',(#12963),#12988,.F.); +#12963 = FACE_BOUND('',#12964,.F.); +#12964 = EDGE_LOOP('',(#12965,#12966,#12974,#12980,#12981,#12982)); +#12965 = ORIENTED_EDGE('',*,*,#12839,.T.); +#12966 = ORIENTED_EDGE('',*,*,#12967,.T.); +#12967 = EDGE_CURVE('',#12832,#12968,#12970,.T.); +#12968 = VERTEX_POINT('',#12969); +#12969 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#12970 = LINE('',#12971,#12972); +#12971 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12972 = VECTOR('',#12973,1.); +#12973 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12974 = ORIENTED_EDGE('',*,*,#12975,.T.); +#12975 = EDGE_CURVE('',#12968,#12943,#12976,.T.); +#12976 = LINE('',#12977,#12978); +#12977 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#12978 = VECTOR('',#12979,1.); +#12979 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12980 = ORIENTED_EDGE('',*,*,#12952,.T.); +#12981 = ORIENTED_EDGE('',*,*,#12302,.T.); +#12982 = ORIENTED_EDGE('',*,*,#12983,.T.); +#12983 = EDGE_CURVE('',#12295,#12840,#12984,.T.); +#12984 = LINE('',#12985,#12986); +#12985 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#12986 = VECTOR('',#12987,1.); +#12987 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12988 = PLANE('',#12989); +#12989 = AXIS2_PLACEMENT_3D('',#12990,#12991,#12992); +#12990 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#12991 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12992 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12993 = ADVANCED_FACE('',(#12994),#13005,.F.); +#12994 = FACE_BOUND('',#12995,.F.); +#12995 = EDGE_LOOP('',(#12996,#12997,#13003,#13004)); +#12996 = ORIENTED_EDGE('',*,*,#12294,.T.); +#12997 = ORIENTED_EDGE('',*,*,#12998,.T.); +#12998 = EDGE_CURVE('',#12287,#12848,#12999,.T.); +#12999 = LINE('',#13000,#13001); +#13000 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#13001 = VECTOR('',#13002,1.); +#13002 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13003 = ORIENTED_EDGE('',*,*,#12847,.T.); +#13004 = ORIENTED_EDGE('',*,*,#12983,.F.); +#13005 = PLANE('',#13006); +#13006 = AXIS2_PLACEMENT_3D('',#13007,#13008,#13009); +#13007 = CARTESIAN_POINT('',(1.25,-0.525,0.)); +#13008 = DIRECTION('',(0.,0.,1.)); +#13009 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13010 = ADVANCED_FACE('',(#13011),#13038,.T.); +#13011 = FACE_BOUND('',#13012,.T.); +#13012 = EDGE_LOOP('',(#13013,#13014,#13022,#13030,#13036,#13037)); +#13013 = ORIENTED_EDGE('',*,*,#12855,.T.); +#13014 = ORIENTED_EDGE('',*,*,#13015,.T.); +#13015 = EDGE_CURVE('',#12856,#13016,#13018,.T.); +#13016 = VERTEX_POINT('',#13017); +#13017 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#13018 = LINE('',#13019,#13020); +#13019 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#13020 = VECTOR('',#13021,1.); +#13021 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13022 = ORIENTED_EDGE('',*,*,#13023,.T.); +#13023 = EDGE_CURVE('',#13016,#13024,#13026,.T.); +#13024 = VERTEX_POINT('',#13025); +#13025 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#13026 = LINE('',#13027,#13028); +#13027 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#13028 = VECTOR('',#13029,1.); +#13029 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13030 = ORIENTED_EDGE('',*,*,#13031,.T.); +#13031 = EDGE_CURVE('',#13024,#12279,#13032,.T.); +#13032 = LINE('',#13033,#13034); +#13033 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#13034 = VECTOR('',#13035,1.); +#13035 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#13036 = ORIENTED_EDGE('',*,*,#12286,.T.); +#13037 = ORIENTED_EDGE('',*,*,#12998,.T.); +#13038 = PLANE('',#13039); +#13039 = AXIS2_PLACEMENT_3D('',#13040,#13041,#13042); +#13040 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#13041 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#13042 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#13043 = ADVANCED_FACE('',(#13044),#13062,.F.); +#13044 = FACE_BOUND('',#13045,.F.); +#13045 = EDGE_LOOP('',(#13046,#13054,#13055,#13056)); +#13046 = ORIENTED_EDGE('',*,*,#13047,.T.); +#13047 = EDGE_CURVE('',#13048,#13024,#13050,.T.); +#13048 = VERTEX_POINT('',#13049); +#13049 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13050 = LINE('',#13051,#13052); +#13051 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13052 = VECTOR('',#13053,1.); +#13053 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13054 = ORIENTED_EDGE('',*,*,#13031,.T.); +#13055 = ORIENTED_EDGE('',*,*,#12278,.F.); +#13056 = ORIENTED_EDGE('',*,*,#13057,.F.); +#13057 = EDGE_CURVE('',#13048,#12271,#13058,.T.); +#13058 = LINE('',#13059,#13060); +#13059 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13060 = VECTOR('',#13061,1.); +#13061 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#13062 = PLANE('',#13063); +#13063 = AXIS2_PLACEMENT_3D('',#13064,#13065,#13066); +#13064 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13065 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#13066 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#13067 = ADVANCED_FACE('',(#13068),#13093,.F.); +#13068 = FACE_BOUND('',#13069,.F.); +#13069 = EDGE_LOOP('',(#13070,#13071,#13079,#13085,#13086,#13087)); +#13070 = ORIENTED_EDGE('',*,*,#12871,.T.); +#13071 = ORIENTED_EDGE('',*,*,#13072,.T.); +#13072 = EDGE_CURVE('',#12864,#13073,#13075,.T.); +#13073 = VERTEX_POINT('',#13074); +#13074 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13075 = LINE('',#13076,#13077); +#13076 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#13077 = VECTOR('',#13078,1.); +#13078 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13079 = ORIENTED_EDGE('',*,*,#13080,.T.); +#13080 = EDGE_CURVE('',#13073,#13048,#13081,.T.); +#13081 = LINE('',#13082,#13083); +#13082 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13083 = VECTOR('',#13084,1.); +#13084 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13085 = ORIENTED_EDGE('',*,*,#13057,.T.); +#13086 = ORIENTED_EDGE('',*,*,#12270,.T.); +#13087 = ORIENTED_EDGE('',*,*,#13088,.T.); +#13088 = EDGE_CURVE('',#12263,#12716,#13089,.T.); +#13089 = LINE('',#13090,#13091); +#13090 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#13091 = VECTOR('',#13092,1.); +#13092 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13093 = PLANE('',#13094); +#13094 = AXIS2_PLACEMENT_3D('',#13095,#13096,#13097); +#13095 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#13096 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#13097 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#13098 = ADVANCED_FACE('',(#13099),#13105,.F.); +#13099 = FACE_BOUND('',#13100,.F.); +#13100 = EDGE_LOOP('',(#13101,#13102,#13103,#13104)); +#13101 = ORIENTED_EDGE('',*,*,#12356,.T.); +#13102 = ORIENTED_EDGE('',*,*,#12715,.T.); +#13103 = ORIENTED_EDGE('',*,*,#13088,.F.); +#13104 = ORIENTED_EDGE('',*,*,#12262,.T.); +#13105 = PLANE('',#13106); +#13106 = AXIS2_PLACEMENT_3D('',#13107,#13108,#13109); +#13107 = CARTESIAN_POINT('',(1.25,-0.525,0.)); +#13108 = DIRECTION('',(0.,0.,1.)); +#13109 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13110 = ADVANCED_FACE('',(#13111),#13138,.F.); +#13111 = FACE_BOUND('',#13112,.F.); +#13112 = EDGE_LOOP('',(#13113,#13114,#13115,#13116,#13122,#13123,#13132) + ); +#13113 = ORIENTED_EDGE('',*,*,#12431,.T.); +#13114 = ORIENTED_EDGE('',*,*,#12342,.F.); +#13115 = ORIENTED_EDGE('',*,*,#12894,.T.); +#13116 = ORIENTED_EDGE('',*,*,#13117,.T.); +#13117 = EDGE_CURVE('',#12887,#12662,#13118,.T.); +#13118 = LINE('',#13119,#13120); +#13119 = CARTESIAN_POINT('',(4.1,-2.65,1.85)); +#13120 = VECTOR('',#13121,1.); +#13121 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13122 = ORIENTED_EDGE('',*,*,#12669,.F.); +#13123 = ORIENTED_EDGE('',*,*,#13124,.F.); +#13124 = EDGE_CURVE('',#13125,#12670,#13127,.T.); +#13125 = VERTEX_POINT('',#13126); +#13126 = CARTESIAN_POINT('',(4.1,1.,3.65)); +#13127 = CIRCLE('',#13128,0.5); +#13128 = AXIS2_PLACEMENT_3D('',#13129,#13130,#13131); +#13129 = CARTESIAN_POINT('',(4.1,1.,4.15)); +#13130 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13131 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13132 = ORIENTED_EDGE('',*,*,#13133,.T.); +#13133 = EDGE_CURVE('',#13125,#12424,#13134,.T.); +#13134 = LINE('',#13135,#13136); +#13135 = CARTESIAN_POINT('',(4.1,-0.825,3.65)); +#13136 = VECTOR('',#13137,1.); +#13137 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13138 = PLANE('',#13139); +#13139 = AXIS2_PLACEMENT_3D('',#13140,#13141,#13142); +#13140 = CARTESIAN_POINT('',(4.1,-2.65,7.)); +#13141 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13142 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13143 = ADVANCED_FACE('',(#13144),#13155,.T.); +#13144 = FACE_BOUND('',#13145,.T.); +#13145 = EDGE_LOOP('',(#13146,#13147,#13148,#13149)); +#13146 = ORIENTED_EDGE('',*,*,#12554,.F.); +#13147 = ORIENTED_EDGE('',*,*,#12399,.T.); +#13148 = ORIENTED_EDGE('',*,*,#12724,.T.); +#13149 = ORIENTED_EDGE('',*,*,#13150,.T.); +#13150 = EDGE_CURVE('',#12725,#12555,#13151,.T.); +#13151 = LINE('',#13152,#13153); +#13152 = CARTESIAN_POINT('',(3.,2.35,7.)); +#13153 = VECTOR('',#13154,1.); +#13154 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13155 = PLANE('',#13156); +#13156 = AXIS2_PLACEMENT_3D('',#13157,#13158,#13159); +#13157 = CARTESIAN_POINT('',(1.25,-0.525,7.)); +#13158 = DIRECTION('',(0.,0.,1.)); +#13159 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13160 = ADVANCED_FACE('',(#13161),#13172,.F.); +#13161 = FACE_BOUND('',#13162,.F.); +#13162 = EDGE_LOOP('',(#13163,#13169,#13170,#13171)); +#13163 = ORIENTED_EDGE('',*,*,#13164,.T.); +#13164 = EDGE_CURVE('',#12375,#13125,#13165,.T.); +#13165 = LINE('',#13166,#13167); +#13166 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#13167 = VECTOR('',#13168,1.); +#13168 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13169 = ORIENTED_EDGE('',*,*,#13124,.T.); +#13170 = ORIENTED_EDGE('',*,*,#12677,.F.); +#13171 = ORIENTED_EDGE('',*,*,#12382,.T.); +#13172 = CYLINDRICAL_SURFACE('',#13173,0.5); +#13173 = AXIS2_PLACEMENT_3D('',#13174,#13175,#13176); +#13174 = CARTESIAN_POINT('',(4.95,1.,4.15)); +#13175 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#13176 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13177 = ADVANCED_FACE('',(#13178),#13184,.T.); +#13178 = FACE_BOUND('',#13179,.T.); +#13179 = EDGE_LOOP('',(#13180,#13181,#13182,#13183)); +#13180 = ORIENTED_EDGE('',*,*,#12374,.F.); +#13181 = ORIENTED_EDGE('',*,*,#13164,.T.); +#13182 = ORIENTED_EDGE('',*,*,#13133,.T.); +#13183 = ORIENTED_EDGE('',*,*,#12423,.F.); +#13184 = PLANE('',#13185); +#13185 = AXIS2_PLACEMENT_3D('',#13186,#13187,#13188); +#13186 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#13187 = DIRECTION('',(0.,0.,1.)); +#13188 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13189 = ADVANCED_FACE('',(#13190,#13196,#13230),#13264,.T.); +#13190 = FACE_BOUND('',#13191,.T.); +#13191 = EDGE_LOOP('',(#13192,#13193,#13194,#13195)); +#13192 = ORIENTED_EDGE('',*,*,#12661,.T.); +#13193 = ORIENTED_EDGE('',*,*,#12472,.T.); +#13194 = ORIENTED_EDGE('',*,*,#12886,.T.); +#13195 = ORIENTED_EDGE('',*,*,#13117,.T.); +#13196 = FACE_BOUND('',#13197,.T.); +#13197 = EDGE_LOOP('',(#13198,#13208,#13216,#13224)); +#13198 = ORIENTED_EDGE('',*,*,#13199,.F.); +#13199 = EDGE_CURVE('',#13200,#13202,#13204,.T.); +#13200 = VERTEX_POINT('',#13201); +#13201 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#13202 = VERTEX_POINT('',#13203); +#13203 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#13204 = LINE('',#13205,#13206); +#13205 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#13206 = VECTOR('',#13207,1.); +#13207 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13208 = ORIENTED_EDGE('',*,*,#13209,.T.); +#13209 = EDGE_CURVE('',#13200,#13210,#13212,.T.); +#13210 = VERTEX_POINT('',#13211); +#13211 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#13212 = LINE('',#13213,#13214); +#13213 = CARTESIAN_POINT('',(0.785,0.32,1.85)); +#13214 = VECTOR('',#13215,1.); +#13215 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13216 = ORIENTED_EDGE('',*,*,#13217,.T.); +#13217 = EDGE_CURVE('',#13210,#13218,#13220,.T.); +#13218 = VERTEX_POINT('',#13219); +#13219 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#13220 = LINE('',#13221,#13222); +#13221 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#13222 = VECTOR('',#13223,1.); +#13223 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13224 = ORIENTED_EDGE('',*,*,#13225,.T.); +#13225 = EDGE_CURVE('',#13218,#13202,#13226,.T.); +#13226 = LINE('',#13227,#13228); +#13227 = CARTESIAN_POINT('',(0.785,-0.32,1.85)); +#13228 = VECTOR('',#13229,1.); +#13229 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13230 = FACE_BOUND('',#13231,.T.); +#13231 = EDGE_LOOP('',(#13232,#13242,#13250,#13258)); +#13232 = ORIENTED_EDGE('',*,*,#13233,.F.); +#13233 = EDGE_CURVE('',#13234,#13236,#13238,.T.); +#13234 = VERTEX_POINT('',#13235); +#13235 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#13236 = VERTEX_POINT('',#13237); +#13237 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#13238 = LINE('',#13239,#13240); +#13239 = CARTESIAN_POINT('',(2.18,-0.26920299558,1.85)); +#13240 = VECTOR('',#13241,1.); +#13241 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13242 = ORIENTED_EDGE('',*,*,#13243,.T.); +#13243 = EDGE_CURVE('',#13234,#13244,#13246,.T.); +#13244 = VERTEX_POINT('',#13245); +#13245 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#13246 = LINE('',#13247,#13248); +#13247 = CARTESIAN_POINT('',(2.035,0.32,1.85)); +#13248 = VECTOR('',#13249,1.); +#13249 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13250 = ORIENTED_EDGE('',*,*,#13251,.T.); +#13251 = EDGE_CURVE('',#13244,#13252,#13254,.T.); +#13252 = VERTEX_POINT('',#13253); +#13253 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#13254 = LINE('',#13255,#13256); +#13255 = CARTESIAN_POINT('',(2.82,-0.26920299558,1.85)); +#13256 = VECTOR('',#13257,1.); +#13257 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13258 = ORIENTED_EDGE('',*,*,#13259,.T.); +#13259 = EDGE_CURVE('',#13252,#13236,#13260,.T.); +#13260 = LINE('',#13261,#13262); +#13261 = CARTESIAN_POINT('',(2.035,-0.32,1.85)); +#13262 = VECTOR('',#13263,1.); +#13263 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13264 = PLANE('',#13265); +#13265 = AXIS2_PLACEMENT_3D('',#13266,#13267,#13268); +#13266 = CARTESIAN_POINT('',(1.25,-0.575,1.85)); +#13267 = DIRECTION('',(0.,0.,1.)); +#13268 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13269 = ADVANCED_FACE('',(#13270),#13281,.F.); +#13270 = FACE_BOUND('',#13271,.F.); +#13271 = EDGE_LOOP('',(#13272,#13273,#13279,#13280)); +#13272 = ORIENTED_EDGE('',*,*,#12814,.F.); +#13273 = ORIENTED_EDGE('',*,*,#13274,.T.); +#13274 = EDGE_CURVE('',#12807,#12637,#13275,.T.); +#13275 = LINE('',#13276,#13277); +#13276 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#13277 = VECTOR('',#13278,1.); +#13278 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13279 = ORIENTED_EDGE('',*,*,#12644,.F.); +#13280 = ORIENTED_EDGE('',*,*,#12692,.F.); +#13281 = PLANE('',#13282); +#13282 = AXIS2_PLACEMENT_3D('',#13283,#13284,#13285); +#13283 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#13284 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13285 = DIRECTION('',(0.,0.,1.)); +#13286 = ADVANCED_FACE('',(#13287),#13298,.F.); +#13287 = FACE_BOUND('',#13288,.F.); +#13288 = EDGE_LOOP('',(#13289,#13290,#13296,#13297)); +#13289 = ORIENTED_EDGE('',*,*,#12806,.F.); +#13290 = ORIENTED_EDGE('',*,*,#13291,.T.); +#13291 = EDGE_CURVE('',#12799,#12629,#13292,.T.); +#13292 = LINE('',#13293,#13294); +#13293 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#13294 = VECTOR('',#13295,1.); +#13295 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13296 = ORIENTED_EDGE('',*,*,#12636,.F.); +#13297 = ORIENTED_EDGE('',*,*,#13274,.F.); +#13298 = PLANE('',#13299); +#13299 = AXIS2_PLACEMENT_3D('',#13300,#13301,#13302); +#13300 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#13301 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13302 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13303 = ADVANCED_FACE('',(#13304),#13315,.F.); +#13304 = FACE_BOUND('',#13305,.F.); +#13305 = EDGE_LOOP('',(#13306,#13307,#13313,#13314)); +#13306 = ORIENTED_EDGE('',*,*,#12798,.F.); +#13307 = ORIENTED_EDGE('',*,*,#13308,.T.); +#13308 = EDGE_CURVE('',#12791,#12621,#13309,.T.); +#13309 = LINE('',#13310,#13311); +#13310 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#13311 = VECTOR('',#13312,1.); +#13312 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13313 = ORIENTED_EDGE('',*,*,#12628,.F.); +#13314 = ORIENTED_EDGE('',*,*,#13291,.F.); +#13315 = PLANE('',#13316); +#13316 = AXIS2_PLACEMENT_3D('',#13317,#13318,#13319); +#13317 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#13318 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13319 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#13320 = ADVANCED_FACE('',(#13321),#13332,.F.); +#13321 = FACE_BOUND('',#13322,.F.); +#13322 = EDGE_LOOP('',(#13323,#13324,#13330,#13331)); +#13323 = ORIENTED_EDGE('',*,*,#12790,.F.); +#13324 = ORIENTED_EDGE('',*,*,#13325,.T.); +#13325 = EDGE_CURVE('',#12782,#12612,#13326,.T.); +#13326 = LINE('',#13327,#13328); +#13327 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#13328 = VECTOR('',#13329,1.); +#13329 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13330 = ORIENTED_EDGE('',*,*,#12620,.F.); +#13331 = ORIENTED_EDGE('',*,*,#13308,.F.); +#13332 = PLANE('',#13333); +#13333 = AXIS2_PLACEMENT_3D('',#13334,#13335,#13336); +#13334 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#13335 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13336 = DIRECTION('',(0.,0.,1.)); +#13337 = ADVANCED_FACE('',(#13338),#13349,.F.); +#13338 = FACE_BOUND('',#13339,.F.); +#13339 = EDGE_LOOP('',(#13340,#13341,#13342,#13343)); +#13340 = ORIENTED_EDGE('',*,*,#12611,.F.); +#13341 = ORIENTED_EDGE('',*,*,#13325,.F.); +#13342 = ORIENTED_EDGE('',*,*,#12781,.F.); +#13343 = ORIENTED_EDGE('',*,*,#13344,.T.); +#13344 = EDGE_CURVE('',#12774,#12604,#13345,.T.); +#13345 = LINE('',#13346,#13347); +#13346 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#13347 = VECTOR('',#13348,1.); +#13348 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13349 = CYLINDRICAL_SURFACE('',#13350,0.75); +#13350 = AXIS2_PLACEMENT_3D('',#13351,#13352,#13353); +#13351 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#13352 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13353 = DIRECTION('',(-0.,0.,-1.)); +#13354 = ADVANCED_FACE('',(#13355),#13366,.F.); +#13355 = FACE_BOUND('',#13356,.F.); +#13356 = EDGE_LOOP('',(#13357,#13358,#13359,#13365)); +#13357 = ORIENTED_EDGE('',*,*,#13344,.F.); +#13358 = ORIENTED_EDGE('',*,*,#12773,.T.); +#13359 = ORIENTED_EDGE('',*,*,#13360,.T.); +#13360 = EDGE_CURVE('',#12765,#12595,#13361,.T.); +#13361 = LINE('',#13362,#13363); +#13362 = CARTESIAN_POINT('',(2.25,2.35,3.1)); +#13363 = VECTOR('',#13364,1.); +#13364 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13365 = ORIENTED_EDGE('',*,*,#12603,.F.); +#13366 = PLANE('',#13367); +#13367 = AXIS2_PLACEMENT_3D('',#13368,#13369,#13370); +#13368 = CARTESIAN_POINT('',(1.25,1.85,3.1)); +#13369 = DIRECTION('',(1.288101310069E-46,1.051814540295E-30,-1.)); +#13370 = DIRECTION('',(1.224646799147E-16,1.,1.051814540295E-30)); +#13371 = ADVANCED_FACE('',(#13372),#13383,.F.); +#13372 = FACE_BOUND('',#13373,.F.); +#13373 = EDGE_LOOP('',(#13374,#13375,#13376,#13382)); +#13374 = ORIENTED_EDGE('',*,*,#13360,.F.); +#13375 = ORIENTED_EDGE('',*,*,#12764,.T.); +#13376 = ORIENTED_EDGE('',*,*,#13377,.T.); +#13377 = EDGE_CURVE('',#12757,#12587,#13378,.T.); +#13378 = LINE('',#13379,#13380); +#13379 = CARTESIAN_POINT('',(3.,2.35,3.85)); +#13380 = VECTOR('',#13381,1.); +#13381 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13382 = ORIENTED_EDGE('',*,*,#12594,.F.); +#13383 = CYLINDRICAL_SURFACE('',#13384,0.75); +#13384 = AXIS2_PLACEMENT_3D('',#13385,#13386,#13387); +#13385 = CARTESIAN_POINT('',(2.25,2.35,3.85)); +#13386 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13387 = DIRECTION('',(0.,-0.,-1.)); +#13388 = ADVANCED_FACE('',(#13389),#13400,.T.); +#13389 = FACE_BOUND('',#13390,.T.); +#13390 = EDGE_LOOP('',(#13391,#13392,#13393,#13394)); +#13391 = ORIENTED_EDGE('',*,*,#12756,.F.); +#13392 = ORIENTED_EDGE('',*,*,#13377,.T.); +#13393 = ORIENTED_EDGE('',*,*,#12586,.F.); +#13394 = ORIENTED_EDGE('',*,*,#13395,.F.); +#13395 = EDGE_CURVE('',#12749,#12579,#13396,.T.); +#13396 = LINE('',#13397,#13398); +#13397 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#13398 = VECTOR('',#13399,1.); +#13399 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13400 = PLANE('',#13401); +#13401 = AXIS2_PLACEMENT_3D('',#13402,#13403,#13404); +#13402 = CARTESIAN_POINT('',(3.,2.35,3.1)); +#13403 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13404 = DIRECTION('',(0.,0.,1.)); +#13405 = ADVANCED_FACE('',(#13406),#13417,.T.); +#13406 = FACE_BOUND('',#13407,.T.); +#13407 = EDGE_LOOP('',(#13408,#13409,#13410,#13411)); +#13408 = ORIENTED_EDGE('',*,*,#12748,.F.); +#13409 = ORIENTED_EDGE('',*,*,#13395,.T.); +#13410 = ORIENTED_EDGE('',*,*,#12578,.F.); +#13411 = ORIENTED_EDGE('',*,*,#13412,.F.); +#13412 = EDGE_CURVE('',#12741,#12571,#13413,.T.); +#13413 = LINE('',#13414,#13415); +#13414 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#13415 = VECTOR('',#13416,1.); +#13416 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13417 = PLANE('',#13418); +#13418 = AXIS2_PLACEMENT_3D('',#13419,#13420,#13421); +#13419 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#13420 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13421 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13422 = ADVANCED_FACE('',(#13423),#13434,.T.); +#13423 = FACE_BOUND('',#13424,.T.); +#13424 = EDGE_LOOP('',(#13425,#13426,#13427,#13428)); +#13425 = ORIENTED_EDGE('',*,*,#12740,.F.); +#13426 = ORIENTED_EDGE('',*,*,#13412,.T.); +#13427 = ORIENTED_EDGE('',*,*,#12570,.F.); +#13428 = ORIENTED_EDGE('',*,*,#13429,.F.); +#13429 = EDGE_CURVE('',#12733,#12563,#13430,.T.); +#13430 = LINE('',#13431,#13432); +#13431 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#13432 = VECTOR('',#13433,1.); +#13433 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13434 = PLANE('',#13435); +#13435 = AXIS2_PLACEMENT_3D('',#13436,#13437,#13438); +#13436 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#13437 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13438 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#13439 = ADVANCED_FACE('',(#13440),#13446,.T.); +#13440 = FACE_BOUND('',#13441,.T.); +#13441 = EDGE_LOOP('',(#13442,#13443,#13444,#13445)); +#13442 = ORIENTED_EDGE('',*,*,#12732,.F.); +#13443 = ORIENTED_EDGE('',*,*,#13429,.T.); +#13444 = ORIENTED_EDGE('',*,*,#12562,.F.); +#13445 = ORIENTED_EDGE('',*,*,#13150,.F.); +#13446 = PLANE('',#13447); +#13447 = AXIS2_PLACEMENT_3D('',#13448,#13449,#13450); +#13448 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#13449 = DIRECTION('',(-1.,1.224646799147E-16,2.467162276945E-16)); +#13450 = DIRECTION('',(2.467162276945E-16,-3.021402385438E-32,1.)); +#13451 = ADVANCED_FACE('',(#13452),#13463,.F.); +#13452 = FACE_BOUND('',#13453,.F.); +#13453 = EDGE_LOOP('',(#13454,#13455,#13456,#13462)); +#13454 = ORIENTED_EDGE('',*,*,#12863,.T.); +#13455 = ORIENTED_EDGE('',*,*,#13015,.T.); +#13456 = ORIENTED_EDGE('',*,*,#13457,.F.); +#13457 = EDGE_CURVE('',#13073,#13016,#13458,.T.); +#13458 = LINE('',#13459,#13460); +#13459 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13460 = VECTOR('',#13461,1.); +#13461 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13462 = ORIENTED_EDGE('',*,*,#13072,.F.); +#13463 = PLANE('',#13464); +#13464 = AXIS2_PLACEMENT_3D('',#13465,#13466,#13467); +#13465 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#13466 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13467 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13468 = ADVANCED_FACE('',(#13469),#13480,.F.); +#13469 = FACE_BOUND('',#13470,.F.); +#13470 = EDGE_LOOP('',(#13471,#13472,#13473,#13479)); +#13471 = ORIENTED_EDGE('',*,*,#12831,.T.); +#13472 = ORIENTED_EDGE('',*,*,#12910,.T.); +#13473 = ORIENTED_EDGE('',*,*,#13474,.F.); +#13474 = EDGE_CURVE('',#12968,#12911,#13475,.T.); +#13475 = LINE('',#13476,#13477); +#13476 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#13477 = VECTOR('',#13478,1.); +#13478 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13479 = ORIENTED_EDGE('',*,*,#12967,.F.); +#13480 = PLANE('',#13481); +#13481 = AXIS2_PLACEMENT_3D('',#13482,#13483,#13484); +#13482 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#13483 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13484 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13485 = ADVANCED_FACE('',(#13486,#13492),#13526,.F.); +#13486 = FACE_BOUND('',#13487,.F.); +#13487 = EDGE_LOOP('',(#13488,#13489,#13490,#13491)); +#13488 = ORIENTED_EDGE('',*,*,#13474,.T.); +#13489 = ORIENTED_EDGE('',*,*,#12918,.T.); +#13490 = ORIENTED_EDGE('',*,*,#12942,.F.); +#13491 = ORIENTED_EDGE('',*,*,#12975,.F.); +#13492 = FACE_BOUND('',#13493,.F.); +#13493 = EDGE_LOOP('',(#13494,#13504,#13512,#13520)); +#13494 = ORIENTED_EDGE('',*,*,#13495,.F.); +#13495 = EDGE_CURVE('',#13496,#13498,#13500,.T.); +#13496 = VERTEX_POINT('',#13497); +#13497 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#13498 = VERTEX_POINT('',#13499); +#13499 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#13500 = LINE('',#13501,#13502); +#13501 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#13502 = VECTOR('',#13503,1.); +#13503 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13504 = ORIENTED_EDGE('',*,*,#13505,.T.); +#13505 = EDGE_CURVE('',#13496,#13506,#13508,.T.); +#13506 = VERTEX_POINT('',#13507); +#13507 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#13508 = LINE('',#13509,#13510); +#13509 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#13510 = VECTOR('',#13511,1.); +#13511 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13512 = ORIENTED_EDGE('',*,*,#13513,.T.); +#13513 = EDGE_CURVE('',#13506,#13514,#13516,.T.); +#13514 = VERTEX_POINT('',#13515); +#13515 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#13516 = LINE('',#13517,#13518); +#13517 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#13518 = VECTOR('',#13519,1.); +#13519 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13520 = ORIENTED_EDGE('',*,*,#13521,.T.); +#13521 = EDGE_CURVE('',#13514,#13498,#13522,.T.); +#13522 = LINE('',#13523,#13524); +#13523 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#13524 = VECTOR('',#13525,1.); +#13525 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13526 = PLANE('',#13527); +#13527 = AXIS2_PLACEMENT_3D('',#13528,#13529,#13530); +#13528 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#13529 = DIRECTION('',(0.,0.,1.)); +#13530 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13531 = ADVANCED_FACE('',(#13532,#13538),#13572,.F.); +#13532 = FACE_BOUND('',#13533,.F.); +#13533 = EDGE_LOOP('',(#13534,#13535,#13536,#13537)); +#13534 = ORIENTED_EDGE('',*,*,#13457,.T.); +#13535 = ORIENTED_EDGE('',*,*,#13023,.T.); +#13536 = ORIENTED_EDGE('',*,*,#13047,.F.); +#13537 = ORIENTED_EDGE('',*,*,#13080,.F.); +#13538 = FACE_BOUND('',#13539,.F.); +#13539 = EDGE_LOOP('',(#13540,#13550,#13558,#13566)); +#13540 = ORIENTED_EDGE('',*,*,#13541,.F.); +#13541 = EDGE_CURVE('',#13542,#13544,#13546,.T.); +#13542 = VERTEX_POINT('',#13543); +#13543 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#13544 = VERTEX_POINT('',#13545); +#13545 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#13546 = LINE('',#13547,#13548); +#13547 = CARTESIAN_POINT('',(2.18,0.26829700442,0.3)); +#13548 = VECTOR('',#13549,1.); +#13549 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13550 = ORIENTED_EDGE('',*,*,#13551,.T.); +#13551 = EDGE_CURVE('',#13542,#13552,#13554,.T.); +#13552 = VERTEX_POINT('',#13553); +#13553 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#13554 = LINE('',#13555,#13556); +#13555 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#13556 = VECTOR('',#13557,1.); +#13557 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13558 = ORIENTED_EDGE('',*,*,#13559,.T.); +#13559 = EDGE_CURVE('',#13552,#13560,#13562,.T.); +#13560 = VERTEX_POINT('',#13561); +#13561 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#13562 = LINE('',#13563,#13564); +#13563 = CARTESIAN_POINT('',(2.82,0.26829700442,0.3)); +#13564 = VECTOR('',#13565,1.); +#13565 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13566 = ORIENTED_EDGE('',*,*,#13567,.T.); +#13567 = EDGE_CURVE('',#13560,#13544,#13568,.T.); +#13568 = LINE('',#13569,#13570); +#13569 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#13570 = VECTOR('',#13571,1.); +#13571 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13572 = PLANE('',#13573); +#13573 = AXIS2_PLACEMENT_3D('',#13574,#13575,#13576); +#13574 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13575 = DIRECTION('',(0.,0.,1.)); +#13576 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13577 = ADVANCED_FACE('',(#13578),#13603,.T.); +#13578 = FACE_BOUND('',#13579,.T.); +#13579 = EDGE_LOOP('',(#13580,#13581,#13589,#13597)); +#13580 = ORIENTED_EDGE('',*,*,#13199,.T.); +#13581 = ORIENTED_EDGE('',*,*,#13582,.T.); +#13582 = EDGE_CURVE('',#13202,#13583,#13585,.T.); +#13583 = VERTEX_POINT('',#13584); +#13584 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#13585 = LINE('',#13586,#13587); +#13586 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13587 = VECTOR('',#13588,1.); +#13588 = DIRECTION('',(0.,0.,1.)); +#13589 = ORIENTED_EDGE('',*,*,#13590,.T.); +#13590 = EDGE_CURVE('',#13583,#13591,#13593,.T.); +#13591 = VERTEX_POINT('',#13592); +#13592 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#13593 = LINE('',#13594,#13595); +#13594 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#13595 = VECTOR('',#13596,1.); +#13596 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13597 = ORIENTED_EDGE('',*,*,#13598,.T.); +#13598 = EDGE_CURVE('',#13591,#13200,#13599,.T.); +#13599 = LINE('',#13600,#13601); +#13600 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#13601 = VECTOR('',#13602,1.); +#13602 = DIRECTION('',(-0.,0.,-1.)); +#13603 = PLANE('',#13604); +#13604 = AXIS2_PLACEMENT_3D('',#13605,#13606,#13607); +#13605 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#13606 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13607 = DIRECTION('',(0.,0.,1.)); +#13608 = ADVANCED_FACE('',(#13609),#13627,.F.); +#13609 = FACE_BOUND('',#13610,.F.); +#13610 = EDGE_LOOP('',(#13611,#13619,#13620,#13621)); +#13611 = ORIENTED_EDGE('',*,*,#13612,.F.); +#13612 = EDGE_CURVE('',#13218,#13613,#13615,.T.); +#13613 = VERTEX_POINT('',#13614); +#13614 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13615 = LINE('',#13616,#13617); +#13616 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13617 = VECTOR('',#13618,1.); +#13618 = DIRECTION('',(0.,0.,1.)); +#13619 = ORIENTED_EDGE('',*,*,#13225,.T.); +#13620 = ORIENTED_EDGE('',*,*,#13582,.T.); +#13621 = ORIENTED_EDGE('',*,*,#13622,.F.); +#13622 = EDGE_CURVE('',#13613,#13583,#13623,.T.); +#13623 = LINE('',#13624,#13625); +#13624 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13625 = VECTOR('',#13626,1.); +#13626 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13627 = PLANE('',#13628); +#13628 = AXIS2_PLACEMENT_3D('',#13629,#13630,#13631); +#13629 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13630 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13631 = DIRECTION('',(0.,-0.,1.)); +#13632 = ADVANCED_FACE('',(#13633),#13651,.F.); +#13633 = FACE_BOUND('',#13634,.F.); +#13634 = EDGE_LOOP('',(#13635,#13636,#13637,#13645)); +#13635 = ORIENTED_EDGE('',*,*,#13217,.T.); +#13636 = ORIENTED_EDGE('',*,*,#13612,.T.); +#13637 = ORIENTED_EDGE('',*,*,#13638,.T.); +#13638 = EDGE_CURVE('',#13613,#13639,#13641,.T.); +#13639 = VERTEX_POINT('',#13640); +#13640 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#13641 = LINE('',#13642,#13643); +#13642 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13643 = VECTOR('',#13644,1.); +#13644 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13645 = ORIENTED_EDGE('',*,*,#13646,.T.); +#13646 = EDGE_CURVE('',#13639,#13210,#13647,.T.); +#13647 = LINE('',#13648,#13649); +#13648 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13649 = VECTOR('',#13650,1.); +#13650 = DIRECTION('',(-0.,0.,-1.)); +#13651 = PLANE('',#13652); +#13652 = AXIS2_PLACEMENT_3D('',#13653,#13654,#13655); +#13653 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#13654 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13655 = DIRECTION('',(0.,0.,1.)); +#13656 = ADVANCED_FACE('',(#13657),#13668,.F.); +#13657 = FACE_BOUND('',#13658,.F.); +#13658 = EDGE_LOOP('',(#13659,#13660,#13666,#13667)); +#13659 = ORIENTED_EDGE('',*,*,#13646,.F.); +#13660 = ORIENTED_EDGE('',*,*,#13661,.T.); +#13661 = EDGE_CURVE('',#13639,#13591,#13662,.T.); +#13662 = LINE('',#13663,#13664); +#13663 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#13664 = VECTOR('',#13665,1.); +#13665 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13666 = ORIENTED_EDGE('',*,*,#13598,.T.); +#13667 = ORIENTED_EDGE('',*,*,#13209,.T.); +#13668 = PLANE('',#13669); +#13669 = AXIS2_PLACEMENT_3D('',#13670,#13671,#13672); +#13670 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13671 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13672 = DIRECTION('',(-0.,0.,-1.)); +#13673 = ADVANCED_FACE('',(#13674),#13699,.T.); +#13674 = FACE_BOUND('',#13675,.T.); +#13675 = EDGE_LOOP('',(#13676,#13677,#13685,#13693)); +#13676 = ORIENTED_EDGE('',*,*,#13233,.T.); +#13677 = ORIENTED_EDGE('',*,*,#13678,.T.); +#13678 = EDGE_CURVE('',#13236,#13679,#13681,.T.); +#13679 = VERTEX_POINT('',#13680); +#13680 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#13681 = LINE('',#13682,#13683); +#13682 = CARTESIAN_POINT('',(2.18,-0.32,-0.9)); +#13683 = VECTOR('',#13684,1.); +#13684 = DIRECTION('',(0.,0.,1.)); +#13685 = ORIENTED_EDGE('',*,*,#13686,.T.); +#13686 = EDGE_CURVE('',#13679,#13687,#13689,.T.); +#13687 = VERTEX_POINT('',#13688); +#13688 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#13689 = LINE('',#13690,#13691); +#13690 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#13691 = VECTOR('',#13692,1.); +#13692 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13693 = ORIENTED_EDGE('',*,*,#13694,.T.); +#13694 = EDGE_CURVE('',#13687,#13234,#13695,.T.); +#13695 = LINE('',#13696,#13697); +#13696 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#13697 = VECTOR('',#13698,1.); +#13698 = DIRECTION('',(-0.,0.,-1.)); +#13699 = PLANE('',#13700); +#13700 = AXIS2_PLACEMENT_3D('',#13701,#13702,#13703); +#13701 = CARTESIAN_POINT('',(2.18,3.65940088399E-02,1.522832428212)); +#13702 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13703 = DIRECTION('',(0.,0.,1.)); +#13704 = ADVANCED_FACE('',(#13705),#13723,.F.); +#13705 = FACE_BOUND('',#13706,.F.); +#13706 = EDGE_LOOP('',(#13707,#13715,#13716,#13717)); +#13707 = ORIENTED_EDGE('',*,*,#13708,.F.); +#13708 = EDGE_CURVE('',#13252,#13709,#13711,.T.); +#13709 = VERTEX_POINT('',#13710); +#13710 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13711 = LINE('',#13712,#13713); +#13712 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#13713 = VECTOR('',#13714,1.); +#13714 = DIRECTION('',(0.,0.,1.)); +#13715 = ORIENTED_EDGE('',*,*,#13259,.T.); +#13716 = ORIENTED_EDGE('',*,*,#13678,.T.); +#13717 = ORIENTED_EDGE('',*,*,#13718,.F.); +#13718 = EDGE_CURVE('',#13709,#13679,#13719,.T.); +#13719 = LINE('',#13720,#13721); +#13720 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13721 = VECTOR('',#13722,1.); +#13722 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13723 = PLANE('',#13724); +#13724 = AXIS2_PLACEMENT_3D('',#13725,#13726,#13727); +#13725 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#13726 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13727 = DIRECTION('',(0.,-0.,1.)); +#13728 = ADVANCED_FACE('',(#13729),#13747,.F.); +#13729 = FACE_BOUND('',#13730,.F.); +#13730 = EDGE_LOOP('',(#13731,#13732,#13733,#13741)); +#13731 = ORIENTED_EDGE('',*,*,#13251,.T.); +#13732 = ORIENTED_EDGE('',*,*,#13708,.T.); +#13733 = ORIENTED_EDGE('',*,*,#13734,.T.); +#13734 = EDGE_CURVE('',#13709,#13735,#13737,.T.); +#13735 = VERTEX_POINT('',#13736); +#13736 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#13737 = LINE('',#13738,#13739); +#13738 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13739 = VECTOR('',#13740,1.); +#13740 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13741 = ORIENTED_EDGE('',*,*,#13742,.T.); +#13742 = EDGE_CURVE('',#13735,#13244,#13743,.T.); +#13743 = LINE('',#13744,#13745); +#13744 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#13745 = VECTOR('',#13746,1.); +#13746 = DIRECTION('',(-0.,0.,-1.)); +#13747 = PLANE('',#13748); +#13748 = AXIS2_PLACEMENT_3D('',#13749,#13750,#13751); +#13749 = CARTESIAN_POINT('',(2.82,3.65940088399E-02,1.522832428212)); +#13750 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13751 = DIRECTION('',(0.,0.,1.)); +#13752 = ADVANCED_FACE('',(#13753),#13764,.F.); +#13753 = FACE_BOUND('',#13754,.F.); +#13754 = EDGE_LOOP('',(#13755,#13756,#13762,#13763)); +#13755 = ORIENTED_EDGE('',*,*,#13742,.F.); +#13756 = ORIENTED_EDGE('',*,*,#13757,.T.); +#13757 = EDGE_CURVE('',#13735,#13687,#13758,.T.); +#13758 = LINE('',#13759,#13760); +#13759 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#13760 = VECTOR('',#13761,1.); +#13761 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13762 = ORIENTED_EDGE('',*,*,#13694,.T.); +#13763 = ORIENTED_EDGE('',*,*,#13243,.T.); +#13764 = PLANE('',#13765); +#13765 = AXIS2_PLACEMENT_3D('',#13766,#13767,#13768); +#13766 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#13767 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13768 = DIRECTION('',(-0.,0.,-1.)); +#13769 = ADVANCED_FACE('',(#13770),#13827,.T.); +#13770 = FACE_BOUND('',#13771,.T.); +#13771 = EDGE_LOOP('',(#13772,#13782,#13790,#13798,#13804,#13805,#13813, + #13821)); +#13772 = ORIENTED_EDGE('',*,*,#13773,.T.); +#13773 = EDGE_CURVE('',#13774,#13776,#13778,.T.); +#13774 = VERTEX_POINT('',#13775); +#13775 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#13776 = VERTEX_POINT('',#13777); +#13777 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#13778 = LINE('',#13779,#13780); +#13779 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#13780 = VECTOR('',#13781,1.); +#13781 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13782 = ORIENTED_EDGE('',*,*,#13783,.T.); +#13783 = EDGE_CURVE('',#13776,#13784,#13786,.T.); +#13784 = VERTEX_POINT('',#13785); +#13785 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#13786 = LINE('',#13787,#13788); +#13787 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#13788 = VECTOR('',#13789,1.); +#13789 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#13790 = ORIENTED_EDGE('',*,*,#13791,.T.); +#13791 = EDGE_CURVE('',#13784,#13792,#13794,.T.); +#13792 = VERTEX_POINT('',#13793); +#13793 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13794 = LINE('',#13795,#13796); +#13795 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#13796 = VECTOR('',#13797,1.); +#13797 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#13798 = ORIENTED_EDGE('',*,*,#13799,.T.); +#13799 = EDGE_CURVE('',#13792,#13498,#13800,.T.); +#13800 = LINE('',#13801,#13802); +#13801 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13802 = VECTOR('',#13803,1.); +#13803 = DIRECTION('',(0.,0.,1.)); +#13804 = ORIENTED_EDGE('',*,*,#13495,.F.); +#13805 = ORIENTED_EDGE('',*,*,#13806,.T.); +#13806 = EDGE_CURVE('',#13496,#13807,#13809,.T.); +#13807 = VERTEX_POINT('',#13808); +#13808 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#13809 = LINE('',#13810,#13811); +#13810 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#13811 = VECTOR('',#13812,1.); +#13812 = DIRECTION('',(-0.,0.,-1.)); +#13813 = ORIENTED_EDGE('',*,*,#13814,.T.); +#13814 = EDGE_CURVE('',#13807,#13815,#13817,.T.); +#13815 = VERTEX_POINT('',#13816); +#13816 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#13817 = LINE('',#13818,#13819); +#13818 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#13819 = VECTOR('',#13820,1.); +#13820 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#13821 = ORIENTED_EDGE('',*,*,#13822,.T.); +#13822 = EDGE_CURVE('',#13815,#13774,#13823,.T.); +#13823 = LINE('',#13824,#13825); +#13824 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#13825 = VECTOR('',#13826,1.); +#13826 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#13827 = PLANE('',#13828); +#13828 = AXIS2_PLACEMENT_3D('',#13829,#13830,#13831); +#13829 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#13830 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13831 = DIRECTION('',(0.,0.,1.)); +#13832 = ADVANCED_FACE('',(#13833),#13851,.F.); +#13833 = FACE_BOUND('',#13834,.F.); +#13834 = EDGE_LOOP('',(#13835,#13843,#13849,#13850)); +#13835 = ORIENTED_EDGE('',*,*,#13836,.F.); +#13836 = EDGE_CURVE('',#13837,#13514,#13839,.T.); +#13837 = VERTEX_POINT('',#13838); +#13838 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13839 = LINE('',#13840,#13841); +#13840 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13841 = VECTOR('',#13842,1.); +#13842 = DIRECTION('',(0.,0.,1.)); +#13843 = ORIENTED_EDGE('',*,*,#13844,.T.); +#13844 = EDGE_CURVE('',#13837,#13792,#13845,.T.); +#13845 = LINE('',#13846,#13847); +#13846 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13847 = VECTOR('',#13848,1.); +#13848 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13849 = ORIENTED_EDGE('',*,*,#13799,.T.); +#13850 = ORIENTED_EDGE('',*,*,#13521,.F.); +#13851 = PLANE('',#13852); +#13852 = AXIS2_PLACEMENT_3D('',#13853,#13854,#13855); +#13853 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13854 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13855 = DIRECTION('',(0.,-0.,1.)); +#13856 = ADVANCED_FACE('',(#13857),#13907,.F.); +#13857 = FACE_BOUND('',#13858,.F.); +#13858 = EDGE_LOOP('',(#13859,#13869,#13877,#13883,#13884,#13885,#13893, + #13901)); +#13859 = ORIENTED_EDGE('',*,*,#13860,.T.); +#13860 = EDGE_CURVE('',#13861,#13863,#13865,.T.); +#13861 = VERTEX_POINT('',#13862); +#13862 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#13863 = VERTEX_POINT('',#13864); +#13864 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#13865 = LINE('',#13866,#13867); +#13866 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#13867 = VECTOR('',#13868,1.); +#13868 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13869 = ORIENTED_EDGE('',*,*,#13870,.T.); +#13870 = EDGE_CURVE('',#13863,#13871,#13873,.T.); +#13871 = VERTEX_POINT('',#13872); +#13872 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#13873 = LINE('',#13874,#13875); +#13874 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#13875 = VECTOR('',#13876,1.); +#13876 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#13877 = ORIENTED_EDGE('',*,*,#13878,.T.); +#13878 = EDGE_CURVE('',#13871,#13837,#13879,.T.); +#13879 = LINE('',#13880,#13881); +#13880 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#13881 = VECTOR('',#13882,1.); +#13882 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#13883 = ORIENTED_EDGE('',*,*,#13836,.T.); +#13884 = ORIENTED_EDGE('',*,*,#13513,.F.); +#13885 = ORIENTED_EDGE('',*,*,#13886,.T.); +#13886 = EDGE_CURVE('',#13506,#13887,#13889,.T.); +#13887 = VERTEX_POINT('',#13888); +#13888 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#13889 = LINE('',#13890,#13891); +#13890 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13891 = VECTOR('',#13892,1.); +#13892 = DIRECTION('',(-0.,0.,-1.)); +#13893 = ORIENTED_EDGE('',*,*,#13894,.T.); +#13894 = EDGE_CURVE('',#13887,#13895,#13897,.T.); +#13895 = VERTEX_POINT('',#13896); +#13896 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#13897 = LINE('',#13898,#13899); +#13898 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#13899 = VECTOR('',#13900,1.); +#13900 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#13901 = ORIENTED_EDGE('',*,*,#13902,.T.); +#13902 = EDGE_CURVE('',#13895,#13861,#13903,.T.); +#13903 = LINE('',#13904,#13905); +#13904 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#13905 = VECTOR('',#13906,1.); +#13906 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#13907 = PLANE('',#13908); +#13908 = AXIS2_PLACEMENT_3D('',#13909,#13910,#13911); +#13909 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#13910 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13911 = DIRECTION('',(0.,0.,1.)); +#13912 = ADVANCED_FACE('',(#13913),#13924,.F.); +#13913 = FACE_BOUND('',#13914,.F.); +#13914 = EDGE_LOOP('',(#13915,#13916,#13917,#13918)); +#13915 = ORIENTED_EDGE('',*,*,#13886,.F.); +#13916 = ORIENTED_EDGE('',*,*,#13505,.F.); +#13917 = ORIENTED_EDGE('',*,*,#13806,.T.); +#13918 = ORIENTED_EDGE('',*,*,#13919,.F.); +#13919 = EDGE_CURVE('',#13887,#13807,#13920,.T.); +#13920 = LINE('',#13921,#13922); +#13921 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#13922 = VECTOR('',#13923,1.); +#13923 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13924 = PLANE('',#13925); +#13925 = AXIS2_PLACEMENT_3D('',#13926,#13927,#13928); +#13926 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13927 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13928 = DIRECTION('',(-0.,0.,-1.)); +#13929 = ADVANCED_FACE('',(#13930),#13987,.T.); +#13930 = FACE_BOUND('',#13931,.T.); +#13931 = EDGE_LOOP('',(#13932,#13942,#13950,#13958,#13964,#13965,#13973, + #13981)); +#13932 = ORIENTED_EDGE('',*,*,#13933,.T.); +#13933 = EDGE_CURVE('',#13934,#13936,#13938,.T.); +#13934 = VERTEX_POINT('',#13935); +#13935 = CARTESIAN_POINT('',(2.18,0.351578947368,-3.2)); +#13936 = VERTEX_POINT('',#13937); +#13937 = CARTESIAN_POINT('',(2.18,-0.288421052632,-3.2)); +#13938 = LINE('',#13939,#13940); +#13939 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#13940 = VECTOR('',#13941,1.); +#13941 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13942 = ORIENTED_EDGE('',*,*,#13943,.T.); +#13943 = EDGE_CURVE('',#13936,#13944,#13946,.T.); +#13944 = VERTEX_POINT('',#13945); +#13945 = CARTESIAN_POINT('',(2.18,-2.E-02,-1.5)); +#13946 = LINE('',#13947,#13948); +#13947 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#13948 = VECTOR('',#13949,1.); +#13949 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#13950 = ORIENTED_EDGE('',*,*,#13951,.T.); +#13951 = EDGE_CURVE('',#13944,#13952,#13954,.T.); +#13952 = VERTEX_POINT('',#13953); +#13953 = CARTESIAN_POINT('',(2.18,-0.32,-0.9)); +#13954 = LINE('',#13955,#13956); +#13955 = CARTESIAN_POINT('',(2.18,-2.E-02,-1.5)); +#13956 = VECTOR('',#13957,1.); +#13957 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#13958 = ORIENTED_EDGE('',*,*,#13959,.T.); +#13959 = EDGE_CURVE('',#13952,#13544,#13960,.T.); +#13960 = LINE('',#13961,#13962); +#13961 = CARTESIAN_POINT('',(2.18,-0.32,-0.9)); +#13962 = VECTOR('',#13963,1.); +#13963 = DIRECTION('',(0.,0.,1.)); +#13964 = ORIENTED_EDGE('',*,*,#13541,.F.); +#13965 = ORIENTED_EDGE('',*,*,#13966,.T.); +#13966 = EDGE_CURVE('',#13542,#13967,#13969,.T.); +#13967 = VERTEX_POINT('',#13968); +#13968 = CARTESIAN_POINT('',(2.18,0.32,-0.9)); +#13969 = LINE('',#13970,#13971); +#13970 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#13971 = VECTOR('',#13972,1.); +#13972 = DIRECTION('',(-0.,0.,-1.)); +#13973 = ORIENTED_EDGE('',*,*,#13974,.T.); +#13974 = EDGE_CURVE('',#13967,#13975,#13977,.T.); +#13975 = VERTEX_POINT('',#13976); +#13976 = CARTESIAN_POINT('',(2.18,0.62,-1.5)); +#13977 = LINE('',#13978,#13979); +#13978 = CARTESIAN_POINT('',(2.18,0.32,-0.9)); +#13979 = VECTOR('',#13980,1.); +#13980 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#13981 = ORIENTED_EDGE('',*,*,#13982,.T.); +#13982 = EDGE_CURVE('',#13975,#13934,#13983,.T.); +#13983 = LINE('',#13984,#13985); +#13984 = CARTESIAN_POINT('',(2.18,0.62,-1.5)); +#13985 = VECTOR('',#13986,1.); +#13986 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#13987 = PLANE('',#13988); +#13988 = AXIS2_PLACEMENT_3D('',#13989,#13990,#13991); +#13989 = CARTESIAN_POINT('',(2.18,3.65940088399E-02,1.522832428212)); +#13990 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13991 = DIRECTION('',(0.,0.,1.)); +#13992 = ADVANCED_FACE('',(#13993),#14011,.F.); +#13993 = FACE_BOUND('',#13994,.F.); +#13994 = EDGE_LOOP('',(#13995,#14003,#14009,#14010)); +#13995 = ORIENTED_EDGE('',*,*,#13996,.F.); +#13996 = EDGE_CURVE('',#13997,#13560,#13999,.T.); +#13997 = VERTEX_POINT('',#13998); +#13998 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#13999 = LINE('',#14000,#14001); +#14000 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#14001 = VECTOR('',#14002,1.); +#14002 = DIRECTION('',(0.,0.,1.)); +#14003 = ORIENTED_EDGE('',*,*,#14004,.T.); +#14004 = EDGE_CURVE('',#13997,#13952,#14005,.T.); +#14005 = LINE('',#14006,#14007); +#14006 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#14007 = VECTOR('',#14008,1.); +#14008 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14009 = ORIENTED_EDGE('',*,*,#13959,.T.); +#14010 = ORIENTED_EDGE('',*,*,#13567,.F.); +#14011 = PLANE('',#14012); +#14012 = AXIS2_PLACEMENT_3D('',#14013,#14014,#14015); +#14013 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#14014 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14015 = DIRECTION('',(0.,-0.,1.)); +#14016 = ADVANCED_FACE('',(#14017),#14067,.F.); +#14017 = FACE_BOUND('',#14018,.F.); +#14018 = EDGE_LOOP('',(#14019,#14029,#14037,#14043,#14044,#14045,#14053, + #14061)); +#14019 = ORIENTED_EDGE('',*,*,#14020,.T.); +#14020 = EDGE_CURVE('',#14021,#14023,#14025,.T.); +#14021 = VERTEX_POINT('',#14022); +#14022 = CARTESIAN_POINT('',(2.82,0.351578947368,-3.2)); +#14023 = VERTEX_POINT('',#14024); +#14024 = CARTESIAN_POINT('',(2.82,-0.288421052632,-3.2)); +#14025 = LINE('',#14026,#14027); +#14026 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#14027 = VECTOR('',#14028,1.); +#14028 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14029 = ORIENTED_EDGE('',*,*,#14030,.T.); +#14030 = EDGE_CURVE('',#14023,#14031,#14033,.T.); +#14031 = VERTEX_POINT('',#14032); +#14032 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14033 = LINE('',#14034,#14035); +#14034 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#14035 = VECTOR('',#14036,1.); +#14036 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14037 = ORIENTED_EDGE('',*,*,#14038,.T.); +#14038 = EDGE_CURVE('',#14031,#13997,#14039,.T.); +#14039 = LINE('',#14040,#14041); +#14040 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14041 = VECTOR('',#14042,1.); +#14042 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14043 = ORIENTED_EDGE('',*,*,#13996,.T.); +#14044 = ORIENTED_EDGE('',*,*,#13559,.F.); +#14045 = ORIENTED_EDGE('',*,*,#14046,.T.); +#14046 = EDGE_CURVE('',#13552,#14047,#14049,.T.); +#14047 = VERTEX_POINT('',#14048); +#14048 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14049 = LINE('',#14050,#14051); +#14050 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#14051 = VECTOR('',#14052,1.); +#14052 = DIRECTION('',(-0.,0.,-1.)); +#14053 = ORIENTED_EDGE('',*,*,#14054,.T.); +#14054 = EDGE_CURVE('',#14047,#14055,#14057,.T.); +#14055 = VERTEX_POINT('',#14056); +#14056 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14057 = LINE('',#14058,#14059); +#14058 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14059 = VECTOR('',#14060,1.); +#14060 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14061 = ORIENTED_EDGE('',*,*,#14062,.T.); +#14062 = EDGE_CURVE('',#14055,#14021,#14063,.T.); +#14063 = LINE('',#14064,#14065); +#14064 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14065 = VECTOR('',#14066,1.); +#14066 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14067 = PLANE('',#14068); +#14068 = AXIS2_PLACEMENT_3D('',#14069,#14070,#14071); +#14069 = CARTESIAN_POINT('',(2.82,3.65940088399E-02,1.522832428212)); +#14070 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14071 = DIRECTION('',(0.,0.,1.)); +#14072 = ADVANCED_FACE('',(#14073),#14084,.F.); +#14073 = FACE_BOUND('',#14074,.F.); +#14074 = EDGE_LOOP('',(#14075,#14076,#14077,#14078)); +#14075 = ORIENTED_EDGE('',*,*,#14046,.F.); +#14076 = ORIENTED_EDGE('',*,*,#13551,.F.); +#14077 = ORIENTED_EDGE('',*,*,#13966,.T.); +#14078 = ORIENTED_EDGE('',*,*,#14079,.F.); +#14079 = EDGE_CURVE('',#14047,#13967,#14080,.T.); +#14080 = LINE('',#14081,#14082); +#14081 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14082 = VECTOR('',#14083,1.); +#14083 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14084 = PLANE('',#14085); +#14085 = AXIS2_PLACEMENT_3D('',#14086,#14087,#14088); +#14086 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#14087 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14088 = DIRECTION('',(-0.,0.,-1.)); +#14089 = ADVANCED_FACE('',(#14090),#14115,.F.); +#14090 = FACE_BOUND('',#14091,.T.); +#14091 = EDGE_LOOP('',(#14092,#14100,#14108,#14114)); +#14092 = ORIENTED_EDGE('',*,*,#14093,.F.); +#14093 = EDGE_CURVE('',#14094,#13583,#14096,.T.); +#14094 = VERTEX_POINT('',#14095); +#14095 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#14096 = LINE('',#14097,#14098); +#14097 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#14098 = VECTOR('',#14099,1.); +#14099 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14100 = ORIENTED_EDGE('',*,*,#14101,.T.); +#14101 = EDGE_CURVE('',#14094,#14102,#14104,.T.); +#14102 = VERTEX_POINT('',#14103); +#14103 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#14104 = LINE('',#14105,#14106); +#14105 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#14106 = VECTOR('',#14107,1.); +#14107 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14108 = ORIENTED_EDGE('',*,*,#14109,.T.); +#14109 = EDGE_CURVE('',#14102,#13591,#14110,.T.); +#14110 = LINE('',#14111,#14112); +#14111 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#14112 = VECTOR('',#14113,1.); +#14113 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14114 = ORIENTED_EDGE('',*,*,#13590,.F.); +#14115 = PLANE('',#14116); +#14116 = AXIS2_PLACEMENT_3D('',#14117,#14118,#14119); +#14117 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#14118 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14119 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14120 = ADVANCED_FACE('',(#14121),#14139,.T.); +#14121 = FACE_BOUND('',#14122,.F.); +#14122 = EDGE_LOOP('',(#14123,#14131,#14132,#14133)); +#14123 = ORIENTED_EDGE('',*,*,#14124,.T.); +#14124 = EDGE_CURVE('',#14125,#13613,#14127,.T.); +#14125 = VERTEX_POINT('',#14126); +#14126 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#14127 = LINE('',#14128,#14129); +#14128 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#14129 = VECTOR('',#14130,1.); +#14130 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#14131 = ORIENTED_EDGE('',*,*,#13622,.T.); +#14132 = ORIENTED_EDGE('',*,*,#14093,.F.); +#14133 = ORIENTED_EDGE('',*,*,#14134,.F.); +#14134 = EDGE_CURVE('',#14125,#14094,#14135,.T.); +#14135 = LINE('',#14136,#14137); +#14136 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#14137 = VECTOR('',#14138,1.); +#14138 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14139 = PLANE('',#14140); +#14140 = AXIS2_PLACEMENT_3D('',#14141,#14142,#14143); +#14141 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#14142 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14143 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14144 = ADVANCED_FACE('',(#14145),#14163,.T.); +#14145 = FACE_BOUND('',#14146,.F.); +#14146 = EDGE_LOOP('',(#14147,#14148,#14156,#14162)); +#14147 = ORIENTED_EDGE('',*,*,#14124,.F.); +#14148 = ORIENTED_EDGE('',*,*,#14149,.T.); +#14149 = EDGE_CURVE('',#14125,#14150,#14152,.T.); +#14150 = VERTEX_POINT('',#14151); +#14151 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#14152 = LINE('',#14153,#14154); +#14153 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#14154 = VECTOR('',#14155,1.); +#14155 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14156 = ORIENTED_EDGE('',*,*,#14157,.T.); +#14157 = EDGE_CURVE('',#14150,#13639,#14158,.T.); +#14158 = LINE('',#14159,#14160); +#14159 = CARTESIAN_POINT('',(0.146666666667,0.146666666667, + 6.473333333333)); +#14160 = VECTOR('',#14161,1.); +#14161 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14162 = ORIENTED_EDGE('',*,*,#13638,.F.); +#14163 = PLANE('',#14164); +#14164 = AXIS2_PLACEMENT_3D('',#14165,#14166,#14167); +#14165 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#14166 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14167 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14168 = ADVANCED_FACE('',(#14169),#14180,.T.); +#14169 = FACE_BOUND('',#14170,.F.); +#14170 = EDGE_LOOP('',(#14171,#14172,#14178,#14179)); +#14171 = ORIENTED_EDGE('',*,*,#14157,.F.); +#14172 = ORIENTED_EDGE('',*,*,#14173,.T.); +#14173 = EDGE_CURVE('',#14150,#14102,#14174,.T.); +#14174 = LINE('',#14175,#14176); +#14175 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#14176 = VECTOR('',#14177,1.); +#14177 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14178 = ORIENTED_EDGE('',*,*,#14109,.T.); +#14179 = ORIENTED_EDGE('',*,*,#13661,.F.); +#14180 = PLANE('',#14181); +#14181 = AXIS2_PLACEMENT_3D('',#14182,#14183,#14184); +#14182 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#14183 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14184 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14185 = ADVANCED_FACE('',(#14186),#14211,.F.); +#14186 = FACE_BOUND('',#14187,.T.); +#14187 = EDGE_LOOP('',(#14188,#14196,#14204,#14210)); +#14188 = ORIENTED_EDGE('',*,*,#14189,.F.); +#14189 = EDGE_CURVE('',#14190,#13679,#14192,.T.); +#14190 = VERTEX_POINT('',#14191); +#14191 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#14192 = LINE('',#14193,#14194); +#14193 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#14194 = VECTOR('',#14195,1.); +#14195 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14196 = ORIENTED_EDGE('',*,*,#14197,.T.); +#14197 = EDGE_CURVE('',#14190,#14198,#14200,.T.); +#14198 = VERTEX_POINT('',#14199); +#14199 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#14200 = LINE('',#14201,#14202); +#14201 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#14202 = VECTOR('',#14203,1.); +#14203 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14204 = ORIENTED_EDGE('',*,*,#14205,.T.); +#14205 = EDGE_CURVE('',#14198,#13687,#14206,.T.); +#14206 = LINE('',#14207,#14208); +#14207 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#14208 = VECTOR('',#14209,1.); +#14209 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14210 = ORIENTED_EDGE('',*,*,#13686,.F.); +#14211 = PLANE('',#14212); +#14212 = AXIS2_PLACEMENT_3D('',#14213,#14214,#14215); +#14213 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#14214 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14215 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14216 = ADVANCED_FACE('',(#14217),#14235,.T.); +#14217 = FACE_BOUND('',#14218,.F.); +#14218 = EDGE_LOOP('',(#14219,#14227,#14228,#14229)); +#14219 = ORIENTED_EDGE('',*,*,#14220,.T.); +#14220 = EDGE_CURVE('',#14221,#13709,#14223,.T.); +#14221 = VERTEX_POINT('',#14222); +#14222 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#14223 = LINE('',#14224,#14225); +#14224 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#14225 = VECTOR('',#14226,1.); +#14226 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#14227 = ORIENTED_EDGE('',*,*,#13718,.T.); +#14228 = ORIENTED_EDGE('',*,*,#14189,.F.); +#14229 = ORIENTED_EDGE('',*,*,#14230,.F.); +#14230 = EDGE_CURVE('',#14221,#14190,#14231,.T.); +#14231 = LINE('',#14232,#14233); +#14232 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#14233 = VECTOR('',#14234,1.); +#14234 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14235 = PLANE('',#14236); +#14236 = AXIS2_PLACEMENT_3D('',#14237,#14238,#14239); +#14237 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#14238 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14239 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14240 = ADVANCED_FACE('',(#14241),#14259,.T.); +#14241 = FACE_BOUND('',#14242,.F.); +#14242 = EDGE_LOOP('',(#14243,#14244,#14252,#14258)); +#14243 = ORIENTED_EDGE('',*,*,#14220,.F.); +#14244 = ORIENTED_EDGE('',*,*,#14245,.T.); +#14245 = EDGE_CURVE('',#14221,#14246,#14248,.T.); +#14246 = VERTEX_POINT('',#14247); +#14247 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#14248 = LINE('',#14249,#14250); +#14249 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#14250 = VECTOR('',#14251,1.); +#14251 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14252 = ORIENTED_EDGE('',*,*,#14253,.T.); +#14253 = EDGE_CURVE('',#14246,#13735,#14254,.T.); +#14254 = LINE('',#14255,#14256); +#14255 = CARTESIAN_POINT('',(2.646666666667,0.146666666667, + 6.473333333333)); +#14256 = VECTOR('',#14257,1.); +#14257 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14258 = ORIENTED_EDGE('',*,*,#13734,.F.); +#14259 = PLANE('',#14260); +#14260 = AXIS2_PLACEMENT_3D('',#14261,#14262,#14263); +#14261 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#14262 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14263 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14264 = ADVANCED_FACE('',(#14265),#14276,.T.); +#14265 = FACE_BOUND('',#14266,.F.); +#14266 = EDGE_LOOP('',(#14267,#14268,#14274,#14275)); +#14267 = ORIENTED_EDGE('',*,*,#14253,.F.); +#14268 = ORIENTED_EDGE('',*,*,#14269,.T.); +#14269 = EDGE_CURVE('',#14246,#14198,#14270,.T.); +#14270 = LINE('',#14271,#14272); +#14271 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#14272 = VECTOR('',#14273,1.); +#14273 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14274 = ORIENTED_EDGE('',*,*,#14205,.T.); +#14275 = ORIENTED_EDGE('',*,*,#13757,.F.); +#14276 = PLANE('',#14277); +#14277 = AXIS2_PLACEMENT_3D('',#14278,#14279,#14280); +#14278 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#14279 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14280 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14281 = ADVANCED_FACE('',(#14282),#14323,.F.); +#14282 = FACE_BOUND('',#14283,.T.); +#14283 = EDGE_LOOP('',(#14284,#14294,#14300,#14301,#14309,#14317)); +#14284 = ORIENTED_EDGE('',*,*,#14285,.T.); +#14285 = EDGE_CURVE('',#14286,#14288,#14290,.T.); +#14286 = VERTEX_POINT('',#14287); +#14287 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#14288 = VERTEX_POINT('',#14289); +#14289 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#14290 = LINE('',#14291,#14292); +#14291 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#14292 = VECTOR('',#14293,1.); +#14293 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#14294 = ORIENTED_EDGE('',*,*,#14295,.T.); +#14295 = EDGE_CURVE('',#14288,#13776,#14296,.T.); +#14296 = LINE('',#14297,#14298); +#14297 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#14298 = VECTOR('',#14299,1.); +#14299 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14300 = ORIENTED_EDGE('',*,*,#13773,.F.); +#14301 = ORIENTED_EDGE('',*,*,#14302,.F.); +#14302 = EDGE_CURVE('',#14303,#13774,#14305,.T.); +#14303 = VERTEX_POINT('',#14304); +#14304 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#14305 = LINE('',#14306,#14307); +#14306 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#14307 = VECTOR('',#14308,1.); +#14308 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14309 = ORIENTED_EDGE('',*,*,#14310,.F.); +#14310 = EDGE_CURVE('',#14311,#14303,#14313,.T.); +#14311 = VERTEX_POINT('',#14312); +#14312 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#14313 = LINE('',#14314,#14315); +#14314 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#14315 = VECTOR('',#14316,1.); +#14316 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#14317 = ORIENTED_EDGE('',*,*,#14318,.T.); +#14318 = EDGE_CURVE('',#14311,#14286,#14319,.T.); +#14319 = LINE('',#14320,#14321); +#14320 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#14321 = VECTOR('',#14322,1.); +#14322 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14323 = PLANE('',#14324); +#14324 = AXIS2_PLACEMENT_3D('',#14325,#14326,#14327); +#14325 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#14326 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14327 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#14328 = ADVANCED_FACE('',(#14329),#14354,.F.); +#14329 = FACE_BOUND('',#14330,.F.); +#14330 = EDGE_LOOP('',(#14331,#14332,#14338,#14339,#14340,#14348)); +#14331 = ORIENTED_EDGE('',*,*,#13902,.F.); +#14332 = ORIENTED_EDGE('',*,*,#14333,.T.); +#14333 = EDGE_CURVE('',#13895,#13815,#14334,.T.); +#14334 = LINE('',#14335,#14336); +#14335 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#14336 = VECTOR('',#14337,1.); +#14337 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14338 = ORIENTED_EDGE('',*,*,#13822,.T.); +#14339 = ORIENTED_EDGE('',*,*,#14302,.F.); +#14340 = ORIENTED_EDGE('',*,*,#14341,.F.); +#14341 = EDGE_CURVE('',#14342,#14303,#14344,.T.); +#14342 = VERTEX_POINT('',#14343); +#14343 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#14344 = LINE('',#14345,#14346); +#14345 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#14346 = VECTOR('',#14347,1.); +#14347 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14348 = ORIENTED_EDGE('',*,*,#14349,.T.); +#14349 = EDGE_CURVE('',#14342,#13861,#14350,.T.); +#14350 = LINE('',#14351,#14352); +#14351 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#14352 = VECTOR('',#14353,1.); +#14353 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14354 = PLANE('',#14355); +#14355 = AXIS2_PLACEMENT_3D('',#14356,#14357,#14358); +#14356 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#14357 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#14358 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14359 = ADVANCED_FACE('',(#14360),#14366,.F.); +#14360 = FACE_BOUND('',#14361,.F.); +#14361 = EDGE_LOOP('',(#14362,#14363,#14364,#14365)); +#14362 = ORIENTED_EDGE('',*,*,#13919,.T.); +#14363 = ORIENTED_EDGE('',*,*,#13814,.T.); +#14364 = ORIENTED_EDGE('',*,*,#14333,.F.); +#14365 = ORIENTED_EDGE('',*,*,#13894,.F.); +#14366 = PLANE('',#14367); +#14367 = AXIS2_PLACEMENT_3D('',#14368,#14369,#14370); +#14368 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#14369 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#14370 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14371 = ADVANCED_FACE('',(#14372),#14383,.F.); +#14372 = FACE_BOUND('',#14373,.F.); +#14373 = EDGE_LOOP('',(#14374,#14380,#14381,#14382)); +#14374 = ORIENTED_EDGE('',*,*,#14375,.T.); +#14375 = EDGE_CURVE('',#13871,#13784,#14376,.T.); +#14376 = LINE('',#14377,#14378); +#14377 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#14378 = VECTOR('',#14379,1.); +#14379 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14380 = ORIENTED_EDGE('',*,*,#13791,.T.); +#14381 = ORIENTED_EDGE('',*,*,#13844,.F.); +#14382 = ORIENTED_EDGE('',*,*,#13878,.F.); +#14383 = PLANE('',#14384); +#14384 = AXIS2_PLACEMENT_3D('',#14385,#14386,#14387); +#14385 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#14386 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#14387 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14388 = ADVANCED_FACE('',(#14389),#14409,.F.); +#14389 = FACE_BOUND('',#14390,.F.); +#14390 = EDGE_LOOP('',(#14391,#14392,#14400,#14406,#14407,#14408)); +#14391 = ORIENTED_EDGE('',*,*,#13870,.F.); +#14392 = ORIENTED_EDGE('',*,*,#14393,.F.); +#14393 = EDGE_CURVE('',#14394,#13863,#14396,.T.); +#14394 = VERTEX_POINT('',#14395); +#14395 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#14396 = LINE('',#14397,#14398); +#14397 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#14398 = VECTOR('',#14399,1.); +#14399 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14400 = ORIENTED_EDGE('',*,*,#14401,.T.); +#14401 = EDGE_CURVE('',#14394,#14288,#14402,.T.); +#14402 = LINE('',#14403,#14404); +#14403 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#14404 = VECTOR('',#14405,1.); +#14405 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14406 = ORIENTED_EDGE('',*,*,#14295,.T.); +#14407 = ORIENTED_EDGE('',*,*,#13783,.T.); +#14408 = ORIENTED_EDGE('',*,*,#14375,.F.); +#14409 = PLANE('',#14410); +#14410 = AXIS2_PLACEMENT_3D('',#14411,#14412,#14413); +#14411 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#14412 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#14413 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14414 = ADVANCED_FACE('',(#14415),#14442,.T.); +#14415 = FACE_BOUND('',#14416,.F.); +#14416 = EDGE_LOOP('',(#14417,#14425,#14426,#14427,#14428,#14436)); +#14417 = ORIENTED_EDGE('',*,*,#14418,.T.); +#14418 = EDGE_CURVE('',#14419,#14394,#14421,.T.); +#14419 = VERTEX_POINT('',#14420); +#14420 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#14421 = LINE('',#14422,#14423); +#14422 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#14423 = VECTOR('',#14424,1.); +#14424 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#14425 = ORIENTED_EDGE('',*,*,#14393,.T.); +#14426 = ORIENTED_EDGE('',*,*,#13860,.F.); +#14427 = ORIENTED_EDGE('',*,*,#14349,.F.); +#14428 = ORIENTED_EDGE('',*,*,#14429,.F.); +#14429 = EDGE_CURVE('',#14430,#14342,#14432,.T.); +#14430 = VERTEX_POINT('',#14431); +#14431 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#14432 = LINE('',#14433,#14434); +#14433 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225 + )); +#14434 = VECTOR('',#14435,1.); +#14435 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#14436 = ORIENTED_EDGE('',*,*,#14437,.T.); +#14437 = EDGE_CURVE('',#14430,#14419,#14438,.T.); +#14438 = LINE('',#14439,#14440); +#14439 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#14440 = VECTOR('',#14441,1.); +#14441 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14442 = PLANE('',#14443); +#14443 = AXIS2_PLACEMENT_3D('',#14444,#14445,#14446); +#14444 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#14445 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14446 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#14447 = ADVANCED_FACE('',(#14448),#14489,.F.); +#14448 = FACE_BOUND('',#14449,.T.); +#14449 = EDGE_LOOP('',(#14450,#14460,#14466,#14467,#14475,#14483)); +#14450 = ORIENTED_EDGE('',*,*,#14451,.T.); +#14451 = EDGE_CURVE('',#14452,#14454,#14456,.T.); +#14452 = VERTEX_POINT('',#14453); +#14453 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#14454 = VERTEX_POINT('',#14455); +#14455 = CARTESIAN_POINT('',(2.182447406934,-0.288807485305, + -3.202447406934)); +#14456 = LINE('',#14457,#14458); +#14457 = CARTESIAN_POINT('',(2.461511443392,-5.034896900541E-02, + -3.481511443392)); +#14458 = VECTOR('',#14459,1.); +#14459 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#14460 = ORIENTED_EDGE('',*,*,#14461,.T.); +#14461 = EDGE_CURVE('',#14454,#13936,#14462,.T.); +#14462 = LINE('',#14463,#14464); +#14463 = CARTESIAN_POINT('',(2.414309165527,-0.325417236662, + -3.434309165527)); +#14464 = VECTOR('',#14465,1.); +#14465 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14466 = ORIENTED_EDGE('',*,*,#13933,.F.); +#14467 = ORIENTED_EDGE('',*,*,#14468,.F.); +#14468 = EDGE_CURVE('',#14469,#13934,#14471,.T.); +#14469 = VERTEX_POINT('',#14470); +#14470 = CARTESIAN_POINT('',(2.182447406934,0.351192514695, + -3.202447406934)); +#14471 = LINE('',#14472,#14473); +#14472 = CARTESIAN_POINT('',(1.958413132695,0.386566347469, + -2.978413132695)); +#14473 = VECTOR('',#14474,1.); +#14474 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14475 = ORIENTED_EDGE('',*,*,#14476,.F.); +#14476 = EDGE_CURVE('',#14477,#14469,#14479,.T.); +#14477 = VERTEX_POINT('',#14478); +#14478 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#14479 = LINE('',#14480,#14481); +#14480 = CARTESIAN_POINT('',(2.346150901889,0.159613036666, + -3.366150901889)); +#14481 = VECTOR('',#14482,1.); +#14482 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#14483 = ORIENTED_EDGE('',*,*,#14484,.T.); +#14484 = EDGE_CURVE('',#14477,#14452,#14485,.T.); +#14485 = LINE('',#14486,#14487); +#14486 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#14487 = VECTOR('',#14488,1.); +#14488 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14489 = PLANE('',#14490); +#14490 = AXIS2_PLACEMENT_3D('',#14491,#14492,#14493); +#14491 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#14492 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14493 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#14494 = ADVANCED_FACE('',(#14495),#14520,.F.); +#14495 = FACE_BOUND('',#14496,.F.); +#14496 = EDGE_LOOP('',(#14497,#14498,#14504,#14505,#14506,#14514)); +#14497 = ORIENTED_EDGE('',*,*,#14062,.F.); +#14498 = ORIENTED_EDGE('',*,*,#14499,.T.); +#14499 = EDGE_CURVE('',#14055,#13975,#14500,.T.); +#14500 = LINE('',#14501,#14502); +#14501 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14502 = VECTOR('',#14503,1.); +#14503 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14504 = ORIENTED_EDGE('',*,*,#13982,.T.); +#14505 = ORIENTED_EDGE('',*,*,#14468,.F.); +#14506 = ORIENTED_EDGE('',*,*,#14507,.F.); +#14507 = EDGE_CURVE('',#14508,#14469,#14510,.T.); +#14508 = VERTEX_POINT('',#14509); +#14509 = CARTESIAN_POINT('',(2.817552593066,0.351192514695, + -3.202447406934)); +#14510 = LINE('',#14511,#14512); +#14511 = CARTESIAN_POINT('',(2.82,0.351192514695,-3.202447406934)); +#14512 = VECTOR('',#14513,1.); +#14513 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14514 = ORIENTED_EDGE('',*,*,#14515,.T.); +#14515 = EDGE_CURVE('',#14508,#14021,#14516,.T.); +#14516 = LINE('',#14517,#14518); +#14517 = CARTESIAN_POINT('',(3.199616963064,0.411518467852, + -2.820383036936)); +#14518 = VECTOR('',#14519,1.); +#14519 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14520 = PLANE('',#14521); +#14521 = AXIS2_PLACEMENT_3D('',#14522,#14523,#14524); +#14522 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14523 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#14524 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14525 = ADVANCED_FACE('',(#14526),#14532,.F.); +#14526 = FACE_BOUND('',#14527,.F.); +#14527 = EDGE_LOOP('',(#14528,#14529,#14530,#14531)); +#14528 = ORIENTED_EDGE('',*,*,#14079,.T.); +#14529 = ORIENTED_EDGE('',*,*,#13974,.T.); +#14530 = ORIENTED_EDGE('',*,*,#14499,.F.); +#14531 = ORIENTED_EDGE('',*,*,#14054,.F.); +#14532 = PLANE('',#14533); +#14533 = AXIS2_PLACEMENT_3D('',#14534,#14535,#14536); +#14534 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14535 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#14536 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14537 = ADVANCED_FACE('',(#14538),#14549,.F.); +#14538 = FACE_BOUND('',#14539,.F.); +#14539 = EDGE_LOOP('',(#14540,#14546,#14547,#14548)); +#14540 = ORIENTED_EDGE('',*,*,#14541,.T.); +#14541 = EDGE_CURVE('',#14031,#13944,#14542,.T.); +#14542 = LINE('',#14543,#14544); +#14543 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14544 = VECTOR('',#14545,1.); +#14545 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14546 = ORIENTED_EDGE('',*,*,#13951,.T.); +#14547 = ORIENTED_EDGE('',*,*,#14004,.F.); +#14548 = ORIENTED_EDGE('',*,*,#14038,.F.); +#14549 = PLANE('',#14550); +#14550 = AXIS2_PLACEMENT_3D('',#14551,#14552,#14553); +#14551 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14552 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#14553 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14554 = ADVANCED_FACE('',(#14555),#14575,.F.); +#14555 = FACE_BOUND('',#14556,.F.); +#14556 = EDGE_LOOP('',(#14557,#14558,#14566,#14572,#14573,#14574)); +#14557 = ORIENTED_EDGE('',*,*,#14030,.F.); +#14558 = ORIENTED_EDGE('',*,*,#14559,.F.); +#14559 = EDGE_CURVE('',#14560,#14023,#14562,.T.); +#14560 = VERTEX_POINT('',#14561); +#14561 = CARTESIAN_POINT('',(2.817552593066,-0.288807485305, + -3.202447406934)); +#14562 = LINE('',#14563,#14564); +#14563 = CARTESIAN_POINT('',(2.743720930233,-0.300465116279, + -3.276279069767)); +#14564 = VECTOR('',#14565,1.); +#14565 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14566 = ORIENTED_EDGE('',*,*,#14567,.T.); +#14567 = EDGE_CURVE('',#14560,#14454,#14568,.T.); +#14568 = LINE('',#14569,#14570); +#14569 = CARTESIAN_POINT('',(2.82,-0.288807485305,-3.202447406934)); +#14570 = VECTOR('',#14571,1.); +#14571 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14572 = ORIENTED_EDGE('',*,*,#14461,.T.); +#14573 = ORIENTED_EDGE('',*,*,#13943,.T.); +#14574 = ORIENTED_EDGE('',*,*,#14541,.F.); +#14575 = PLANE('',#14576); +#14576 = AXIS2_PLACEMENT_3D('',#14577,#14578,#14579); +#14577 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#14578 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#14579 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14580 = ADVANCED_FACE('',(#14581),#14608,.T.); +#14581 = FACE_BOUND('',#14582,.F.); +#14582 = EDGE_LOOP('',(#14583,#14591,#14592,#14593,#14594,#14602)); +#14583 = ORIENTED_EDGE('',*,*,#14584,.T.); +#14584 = EDGE_CURVE('',#14585,#14560,#14587,.T.); +#14585 = VERTEX_POINT('',#14586); +#14586 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#14587 = LINE('',#14588,#14589); +#14588 = CARTESIAN_POINT('',(2.655697812072,-0.150503562587, + -3.364302187928)); +#14589 = VECTOR('',#14590,1.); +#14590 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#14591 = ORIENTED_EDGE('',*,*,#14559,.T.); +#14592 = ORIENTED_EDGE('',*,*,#14020,.F.); +#14593 = ORIENTED_EDGE('',*,*,#14515,.F.); +#14594 = ORIENTED_EDGE('',*,*,#14595,.F.); +#14595 = EDGE_CURVE('',#14596,#14508,#14598,.T.); +#14596 = VERTEX_POINT('',#14597); +#14597 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#14598 = LINE('',#14599,#14600); +#14599 = CARTESIAN_POINT('',(2.74881689775,0.270752273427,-3.27118310225 + )); +#14600 = VECTOR('',#14601,1.); +#14601 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#14602 = ORIENTED_EDGE('',*,*,#14603,.T.); +#14603 = EDGE_CURVE('',#14596,#14585,#14604,.T.); +#14604 = LINE('',#14605,#14606); +#14605 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#14606 = VECTOR('',#14607,1.); +#14607 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14608 = PLANE('',#14609); +#14609 = AXIS2_PLACEMENT_3D('',#14610,#14611,#14612); +#14610 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#14611 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14612 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#14613 = ADVANCED_FACE('',(#14614),#14620,.F.); +#14614 = FACE_BOUND('',#14615,.F.); +#14615 = EDGE_LOOP('',(#14616,#14617,#14618,#14619)); +#14616 = ORIENTED_EDGE('',*,*,#14101,.T.); +#14617 = ORIENTED_EDGE('',*,*,#14173,.F.); +#14618 = ORIENTED_EDGE('',*,*,#14149,.F.); +#14619 = ORIENTED_EDGE('',*,*,#14134,.T.); +#14620 = PLANE('',#14621); +#14621 = AXIS2_PLACEMENT_3D('',#14622,#14623,#14624); +#14622 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#14623 = DIRECTION('',(-0.,0.,-1.)); +#14624 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14625 = ADVANCED_FACE('',(#14626),#14632,.F.); +#14626 = FACE_BOUND('',#14627,.F.); +#14627 = EDGE_LOOP('',(#14628,#14629,#14630,#14631)); +#14628 = ORIENTED_EDGE('',*,*,#14197,.T.); +#14629 = ORIENTED_EDGE('',*,*,#14269,.F.); +#14630 = ORIENTED_EDGE('',*,*,#14245,.F.); +#14631 = ORIENTED_EDGE('',*,*,#14230,.T.); +#14632 = PLANE('',#14633); +#14633 = AXIS2_PLACEMENT_3D('',#14634,#14635,#14636); +#14634 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#14635 = DIRECTION('',(-0.,0.,-1.)); +#14636 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14637 = ADVANCED_FACE('',(#14638),#14649,.T.); +#14638 = FACE_BOUND('',#14639,.F.); +#14639 = EDGE_LOOP('',(#14640,#14641,#14647,#14648)); +#14640 = ORIENTED_EDGE('',*,*,#14418,.F.); +#14641 = ORIENTED_EDGE('',*,*,#14642,.T.); +#14642 = EDGE_CURVE('',#14419,#14286,#14643,.T.); +#14643 = LINE('',#14644,#14645); +#14644 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#14645 = VECTOR('',#14646,1.); +#14646 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14647 = ORIENTED_EDGE('',*,*,#14285,.T.); +#14648 = ORIENTED_EDGE('',*,*,#14401,.F.); +#14649 = PLANE('',#14650); +#14650 = AXIS2_PLACEMENT_3D('',#14651,#14652,#14653); +#14651 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#14652 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#14653 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#14654 = ADVANCED_FACE('',(#14655),#14666,.F.); +#14655 = FACE_BOUND('',#14656,.F.); +#14656 = EDGE_LOOP('',(#14657,#14658,#14659,#14665)); +#14657 = ORIENTED_EDGE('',*,*,#14642,.F.); +#14658 = ORIENTED_EDGE('',*,*,#14437,.F.); +#14659 = ORIENTED_EDGE('',*,*,#14660,.T.); +#14660 = EDGE_CURVE('',#14430,#14311,#14661,.T.); +#14661 = LINE('',#14662,#14663); +#14662 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#14663 = VECTOR('',#14664,1.); +#14664 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14665 = ORIENTED_EDGE('',*,*,#14318,.T.); +#14666 = PLANE('',#14667); +#14667 = AXIS2_PLACEMENT_3D('',#14668,#14669,#14670); +#14668 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#14669 = DIRECTION('',(0.,0.,1.)); +#14670 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14671 = ADVANCED_FACE('',(#14672),#14678,.T.); +#14672 = FACE_BOUND('',#14673,.T.); +#14673 = EDGE_LOOP('',(#14674,#14675,#14676,#14677)); +#14674 = ORIENTED_EDGE('',*,*,#14429,.F.); +#14675 = ORIENTED_EDGE('',*,*,#14660,.T.); +#14676 = ORIENTED_EDGE('',*,*,#14310,.T.); +#14677 = ORIENTED_EDGE('',*,*,#14341,.F.); +#14678 = PLANE('',#14679); +#14679 = AXIS2_PLACEMENT_3D('',#14680,#14681,#14682); +#14680 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#14681 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#14682 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#14683 = ADVANCED_FACE('',(#14684),#14695,.T.); +#14684 = FACE_BOUND('',#14685,.F.); +#14685 = EDGE_LOOP('',(#14686,#14687,#14693,#14694)); +#14686 = ORIENTED_EDGE('',*,*,#14584,.F.); +#14687 = ORIENTED_EDGE('',*,*,#14688,.T.); +#14688 = EDGE_CURVE('',#14585,#14452,#14689,.T.); +#14689 = LINE('',#14690,#14691); +#14690 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#14691 = VECTOR('',#14692,1.); +#14692 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14693 = ORIENTED_EDGE('',*,*,#14451,.T.); +#14694 = ORIENTED_EDGE('',*,*,#14567,.F.); +#14695 = PLANE('',#14696); +#14696 = AXIS2_PLACEMENT_3D('',#14697,#14698,#14699); +#14697 = CARTESIAN_POINT('',(2.82,-0.204403742653,-3.301223703467)); +#14698 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#14699 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#14700 = ADVANCED_FACE('',(#14701),#14712,.F.); +#14701 = FACE_BOUND('',#14702,.F.); +#14702 = EDGE_LOOP('',(#14703,#14704,#14705,#14711)); +#14703 = ORIENTED_EDGE('',*,*,#14688,.F.); +#14704 = ORIENTED_EDGE('',*,*,#14603,.F.); +#14705 = ORIENTED_EDGE('',*,*,#14706,.T.); +#14706 = EDGE_CURVE('',#14596,#14477,#14707,.T.); +#14707 = LINE('',#14708,#14709); +#14708 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#14709 = VECTOR('',#14710,1.); +#14710 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14711 = ORIENTED_EDGE('',*,*,#14484,.T.); +#14712 = PLANE('',#14713); +#14713 = AXIS2_PLACEMENT_3D('',#14714,#14715,#14716); +#14714 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#14715 = DIRECTION('',(0.,0.,1.)); +#14716 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14717 = ADVANCED_FACE('',(#14718),#14724,.T.); +#14718 = FACE_BOUND('',#14719,.T.); +#14719 = EDGE_LOOP('',(#14720,#14721,#14722,#14723)); +#14720 = ORIENTED_EDGE('',*,*,#14595,.F.); +#14721 = ORIENTED_EDGE('',*,*,#14706,.T.); +#14722 = ORIENTED_EDGE('',*,*,#14476,.T.); +#14723 = ORIENTED_EDGE('',*,*,#14507,.F.); +#14724 = PLANE('',#14725); +#14725 = AXIS2_PLACEMENT_3D('',#14726,#14727,#14728); +#14726 = CARTESIAN_POINT('',(2.82,0.235596257347,-3.301223703467)); +#14727 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#14728 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#14729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#14733)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#14730,#14731,#14732)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#14730 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#14731 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#14732 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#14733 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#14730, + 'distance_accuracy_value','confusion accuracy'); +#14734 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#14735,#14737); +#14735 = ( REPRESENTATION_RELATIONSHIP('','',#12013,#11990) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#14736) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#14736 = ITEM_DEFINED_TRANSFORMATION('','',#11,#11991); +#14737 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #14738); +#14738 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','=>[0:1:1:13]','',#11985, + #12008,$); +#14739 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12010)); +#14740 = SHAPE_DEFINITION_REPRESENTATION(#14741,#14747); +#14741 = PRODUCT_DEFINITION_SHAPE('','',#14742); +#14742 = PRODUCT_DEFINITION('design','',#14743,#14746); +#14743 = PRODUCT_DEFINITION_FORMATION('','',#14744); +#14744 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#14745)); +#14745 = PRODUCT_CONTEXT('',#2,'mechanical'); +#14746 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#14747 = SHAPE_REPRESENTATION('',(#11,#14748),#14752); +#14748 = AXIS2_PLACEMENT_3D('',#14749,#14750,#14751); +#14749 = CARTESIAN_POINT('',(0.,0.,0.)); +#14750 = DIRECTION('',(0.,0.,1.)); +#14751 = DIRECTION('',(1.,0.,-0.)); +#14752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#14756)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#14753,#14754,#14755)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#14753 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#14754 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#14755 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#14756 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#14753, + 'distance_accuracy_value','confusion accuracy'); +#14757 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#14758,#14760); +#14758 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#14759) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#14759 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51); +#14760 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #14761); +#14761 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('17','Ccomp','',#5,#14742,$); +#14762 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#14744)); +#14763 = SHAPE_DEFINITION_REPRESENTATION(#14764,#14770); +#14764 = PRODUCT_DEFINITION_SHAPE('','',#14765); +#14765 = PRODUCT_DEFINITION('design','',#14766,#14769); +#14766 = PRODUCT_DEFINITION_FORMATION('','',#14767); +#14767 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#14768)); +#14768 = PRODUCT_CONTEXT('',#2,'mechanical'); +#14769 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#14770 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#14771),#15625); +#14771 = MANIFOLD_SOLID_BREP('',#14772); +#14772 = CLOSED_SHELL('',(#14773,#14849,#14880,#14905,#14930,#14954, + #14978,#15003,#15028,#15045,#15131,#15163,#15187,#15212,#15236, + #15261,#15285,#15310,#15327,#15413,#15444,#15469,#15494,#15518, + #15542,#15567,#15592,#15609)); +#14773 = ADVANCED_FACE('',(#14774),#14844,.F.); +#14774 = FACE_BOUND('',#14775,.F.); +#14775 = EDGE_LOOP('',(#14776,#14786,#14795,#14803,#14812,#14820,#14829, + #14837)); +#14776 = ORIENTED_EDGE('',*,*,#14777,.F.); +#14777 = EDGE_CURVE('',#14778,#14780,#14782,.T.); +#14778 = VERTEX_POINT('',#14779); +#14779 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#14780 = VERTEX_POINT('',#14781); +#14781 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#14782 = LINE('',#14783,#14784); +#14783 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14784 = VECTOR('',#14785,1.); +#14785 = DIRECTION('',(0.,0.,1.)); +#14786 = ORIENTED_EDGE('',*,*,#14787,.T.); +#14787 = EDGE_CURVE('',#14778,#14788,#14790,.T.); +#14788 = VERTEX_POINT('',#14789); +#14789 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#14790 = CIRCLE('',#14791,3.E-02); +#14791 = AXIS2_PLACEMENT_3D('',#14792,#14793,#14794); +#14792 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#14793 = DIRECTION('',(1.,0.,-0.)); +#14794 = DIRECTION('',(0.,0.,1.)); +#14795 = ORIENTED_EDGE('',*,*,#14796,.T.); +#14796 = EDGE_CURVE('',#14788,#14797,#14799,.T.); +#14797 = VERTEX_POINT('',#14798); +#14798 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#14799 = LINE('',#14800,#14801); +#14800 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14801 = VECTOR('',#14802,1.); +#14802 = DIRECTION('',(0.,1.,0.)); +#14803 = ORIENTED_EDGE('',*,*,#14804,.F.); +#14804 = EDGE_CURVE('',#14805,#14797,#14807,.T.); +#14805 = VERTEX_POINT('',#14806); +#14806 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#14807 = CIRCLE('',#14808,3.E-02); +#14808 = AXIS2_PLACEMENT_3D('',#14809,#14810,#14811); +#14809 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#14810 = DIRECTION('',(-1.,0.,0.)); +#14811 = DIRECTION('',(0.,0.,1.)); +#14812 = ORIENTED_EDGE('',*,*,#14813,.T.); +#14813 = EDGE_CURVE('',#14805,#14814,#14816,.T.); +#14814 = VERTEX_POINT('',#14815); +#14815 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#14816 = LINE('',#14817,#14818); +#14817 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#14818 = VECTOR('',#14819,1.); +#14819 = DIRECTION('',(0.,0.,1.)); +#14820 = ORIENTED_EDGE('',*,*,#14821,.T.); +#14821 = EDGE_CURVE('',#14814,#14822,#14824,.T.); +#14822 = VERTEX_POINT('',#14823); +#14823 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#14824 = CIRCLE('',#14825,3.E-02); +#14825 = AXIS2_PLACEMENT_3D('',#14826,#14827,#14828); +#14826 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#14827 = DIRECTION('',(1.,0.,-0.)); +#14828 = DIRECTION('',(0.,0.,1.)); +#14829 = ORIENTED_EDGE('',*,*,#14830,.F.); +#14830 = EDGE_CURVE('',#14831,#14822,#14833,.T.); +#14831 = VERTEX_POINT('',#14832); +#14832 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#14833 = LINE('',#14834,#14835); +#14834 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#14835 = VECTOR('',#14836,1.); +#14836 = DIRECTION('',(0.,1.,0.)); +#14837 = ORIENTED_EDGE('',*,*,#14838,.F.); +#14838 = EDGE_CURVE('',#14780,#14831,#14839,.T.); +#14839 = CIRCLE('',#14840,3.E-02); +#14840 = AXIS2_PLACEMENT_3D('',#14841,#14842,#14843); +#14841 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#14842 = DIRECTION('',(-1.,0.,0.)); +#14843 = DIRECTION('',(0.,0.,1.)); +#14844 = PLANE('',#14845); +#14845 = AXIS2_PLACEMENT_3D('',#14846,#14847,#14848); +#14846 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14847 = DIRECTION('',(1.,0.,0.)); +#14848 = DIRECTION('',(0.,0.,1.)); +#14849 = ADVANCED_FACE('',(#14850),#14875,.F.); +#14850 = FACE_BOUND('',#14851,.F.); +#14851 = EDGE_LOOP('',(#14852,#14862,#14868,#14869)); +#14852 = ORIENTED_EDGE('',*,*,#14853,.F.); +#14853 = EDGE_CURVE('',#14854,#14856,#14858,.T.); +#14854 = VERTEX_POINT('',#14855); +#14855 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#14856 = VERTEX_POINT('',#14857); +#14857 = CARTESIAN_POINT('',(-0.5,-0.4,0.77)); +#14858 = LINE('',#14859,#14860); +#14859 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#14860 = VECTOR('',#14861,1.); +#14861 = DIRECTION('',(0.,0.,1.)); +#14862 = ORIENTED_EDGE('',*,*,#14863,.F.); +#14863 = EDGE_CURVE('',#14778,#14854,#14864,.T.); +#14864 = LINE('',#14865,#14866); +#14865 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#14866 = VECTOR('',#14867,1.); +#14867 = DIRECTION('',(1.,0.,0.)); +#14868 = ORIENTED_EDGE('',*,*,#14777,.T.); +#14869 = ORIENTED_EDGE('',*,*,#14870,.T.); +#14870 = EDGE_CURVE('',#14780,#14856,#14871,.T.); +#14871 = LINE('',#14872,#14873); +#14872 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#14873 = VECTOR('',#14874,1.); +#14874 = DIRECTION('',(1.,0.,0.)); +#14875 = PLANE('',#14876); +#14876 = AXIS2_PLACEMENT_3D('',#14877,#14878,#14879); +#14877 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14878 = DIRECTION('',(0.,1.,0.)); +#14879 = DIRECTION('',(0.,-0.,1.)); +#14880 = ADVANCED_FACE('',(#14881),#14900,.T.); +#14881 = FACE_BOUND('',#14882,.T.); +#14882 = EDGE_LOOP('',(#14883,#14884,#14892,#14899)); +#14883 = ORIENTED_EDGE('',*,*,#14787,.T.); +#14884 = ORIENTED_EDGE('',*,*,#14885,.T.); +#14885 = EDGE_CURVE('',#14788,#14886,#14888,.T.); +#14886 = VERTEX_POINT('',#14887); +#14887 = CARTESIAN_POINT('',(-0.5,-0.37,0.)); +#14888 = LINE('',#14889,#14890); +#14889 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#14890 = VECTOR('',#14891,1.); +#14891 = DIRECTION('',(1.,0.,0.)); +#14892 = ORIENTED_EDGE('',*,*,#14893,.F.); +#14893 = EDGE_CURVE('',#14854,#14886,#14894,.T.); +#14894 = CIRCLE('',#14895,3.E-02); +#14895 = AXIS2_PLACEMENT_3D('',#14896,#14897,#14898); +#14896 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#14897 = DIRECTION('',(1.,0.,-0.)); +#14898 = DIRECTION('',(0.,0.,1.)); +#14899 = ORIENTED_EDGE('',*,*,#14863,.F.); +#14900 = CYLINDRICAL_SURFACE('',#14901,3.E-02); +#14901 = AXIS2_PLACEMENT_3D('',#14902,#14903,#14904); +#14902 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#14903 = DIRECTION('',(1.,0.,0.)); +#14904 = DIRECTION('',(0.,-1.,0.)); +#14905 = ADVANCED_FACE('',(#14906),#14925,.T.); +#14906 = FACE_BOUND('',#14907,.T.); +#14907 = EDGE_LOOP('',(#14908,#14909,#14918,#14924)); +#14908 = ORIENTED_EDGE('',*,*,#14870,.T.); +#14909 = ORIENTED_EDGE('',*,*,#14910,.T.); +#14910 = EDGE_CURVE('',#14856,#14911,#14913,.T.); +#14911 = VERTEX_POINT('',#14912); +#14912 = CARTESIAN_POINT('',(-0.5,-0.37,0.8)); +#14913 = CIRCLE('',#14914,3.E-02); +#14914 = AXIS2_PLACEMENT_3D('',#14915,#14916,#14917); +#14915 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#14916 = DIRECTION('',(-1.,0.,0.)); +#14917 = DIRECTION('',(0.,0.,1.)); +#14918 = ORIENTED_EDGE('',*,*,#14919,.F.); +#14919 = EDGE_CURVE('',#14831,#14911,#14920,.T.); +#14920 = LINE('',#14921,#14922); +#14921 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#14922 = VECTOR('',#14923,1.); +#14923 = DIRECTION('',(1.,0.,0.)); +#14924 = ORIENTED_EDGE('',*,*,#14838,.F.); +#14925 = CYLINDRICAL_SURFACE('',#14926,3.E-02); +#14926 = AXIS2_PLACEMENT_3D('',#14927,#14928,#14929); +#14927 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#14928 = DIRECTION('',(1.,0.,0.)); +#14929 = DIRECTION('',(0.,-1.,0.)); +#14930 = ADVANCED_FACE('',(#14931),#14949,.F.); +#14931 = FACE_BOUND('',#14932,.F.); +#14932 = EDGE_LOOP('',(#14933,#14934,#14935,#14943)); +#14933 = ORIENTED_EDGE('',*,*,#14796,.F.); +#14934 = ORIENTED_EDGE('',*,*,#14885,.T.); +#14935 = ORIENTED_EDGE('',*,*,#14936,.T.); +#14936 = EDGE_CURVE('',#14886,#14937,#14939,.T.); +#14937 = VERTEX_POINT('',#14938); +#14938 = CARTESIAN_POINT('',(-0.5,0.37,0.)); +#14939 = LINE('',#14940,#14941); +#14940 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#14941 = VECTOR('',#14942,1.); +#14942 = DIRECTION('',(0.,1.,0.)); +#14943 = ORIENTED_EDGE('',*,*,#14944,.F.); +#14944 = EDGE_CURVE('',#14797,#14937,#14945,.T.); +#14945 = LINE('',#14946,#14947); +#14946 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#14947 = VECTOR('',#14948,1.); +#14948 = DIRECTION('',(1.,0.,0.)); +#14949 = PLANE('',#14950); +#14950 = AXIS2_PLACEMENT_3D('',#14951,#14952,#14953); +#14951 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14952 = DIRECTION('',(0.,0.,1.)); +#14953 = DIRECTION('',(1.,0.,-0.)); +#14954 = ADVANCED_FACE('',(#14955),#14973,.T.); +#14955 = FACE_BOUND('',#14956,.T.); +#14956 = EDGE_LOOP('',(#14957,#14958,#14959,#14967)); +#14957 = ORIENTED_EDGE('',*,*,#14830,.F.); +#14958 = ORIENTED_EDGE('',*,*,#14919,.T.); +#14959 = ORIENTED_EDGE('',*,*,#14960,.T.); +#14960 = EDGE_CURVE('',#14911,#14961,#14963,.T.); +#14961 = VERTEX_POINT('',#14962); +#14962 = CARTESIAN_POINT('',(-0.5,0.37,0.8)); +#14963 = LINE('',#14964,#14965); +#14964 = CARTESIAN_POINT('',(-0.5,-0.4,0.8)); +#14965 = VECTOR('',#14966,1.); +#14966 = DIRECTION('',(0.,1.,0.)); +#14967 = ORIENTED_EDGE('',*,*,#14968,.F.); +#14968 = EDGE_CURVE('',#14822,#14961,#14969,.T.); +#14969 = LINE('',#14970,#14971); +#14970 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#14971 = VECTOR('',#14972,1.); +#14972 = DIRECTION('',(1.,0.,0.)); +#14973 = PLANE('',#14974); +#14974 = AXIS2_PLACEMENT_3D('',#14975,#14976,#14977); +#14975 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#14976 = DIRECTION('',(0.,0.,1.)); +#14977 = DIRECTION('',(1.,0.,-0.)); +#14978 = ADVANCED_FACE('',(#14979),#14998,.T.); +#14979 = FACE_BOUND('',#14980,.T.); +#14980 = EDGE_LOOP('',(#14981,#14989,#14996,#14997)); +#14981 = ORIENTED_EDGE('',*,*,#14982,.T.); +#14982 = EDGE_CURVE('',#14805,#14983,#14985,.T.); +#14983 = VERTEX_POINT('',#14984); +#14984 = CARTESIAN_POINT('',(-0.5,0.4,3.E-02)); +#14985 = LINE('',#14986,#14987); +#14986 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#14987 = VECTOR('',#14988,1.); +#14988 = DIRECTION('',(1.,0.,0.)); +#14989 = ORIENTED_EDGE('',*,*,#14990,.T.); +#14990 = EDGE_CURVE('',#14983,#14937,#14991,.T.); +#14991 = CIRCLE('',#14992,3.E-02); +#14992 = AXIS2_PLACEMENT_3D('',#14993,#14994,#14995); +#14993 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#14994 = DIRECTION('',(-1.,0.,0.)); +#14995 = DIRECTION('',(0.,0.,1.)); +#14996 = ORIENTED_EDGE('',*,*,#14944,.F.); +#14997 = ORIENTED_EDGE('',*,*,#14804,.F.); +#14998 = CYLINDRICAL_SURFACE('',#14999,3.E-02); +#14999 = AXIS2_PLACEMENT_3D('',#15000,#15001,#15002); +#15000 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#15001 = DIRECTION('',(1.,0.,0.)); +#15002 = DIRECTION('',(-0.,1.,0.)); +#15003 = ADVANCED_FACE('',(#15004),#15023,.T.); +#15004 = FACE_BOUND('',#15005,.T.); +#15005 = EDGE_LOOP('',(#15006,#15007,#15008,#15017)); +#15006 = ORIENTED_EDGE('',*,*,#14821,.T.); +#15007 = ORIENTED_EDGE('',*,*,#14968,.T.); +#15008 = ORIENTED_EDGE('',*,*,#15009,.F.); +#15009 = EDGE_CURVE('',#15010,#14961,#15012,.T.); +#15010 = VERTEX_POINT('',#15011); +#15011 = CARTESIAN_POINT('',(-0.5,0.4,0.77)); +#15012 = CIRCLE('',#15013,3.E-02); +#15013 = AXIS2_PLACEMENT_3D('',#15014,#15015,#15016); +#15014 = CARTESIAN_POINT('',(-0.5,0.37,0.77)); +#15015 = DIRECTION('',(1.,0.,-0.)); +#15016 = DIRECTION('',(0.,0.,1.)); +#15017 = ORIENTED_EDGE('',*,*,#15018,.F.); +#15018 = EDGE_CURVE('',#14814,#15010,#15019,.T.); +#15019 = LINE('',#15020,#15021); +#15020 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#15021 = VECTOR('',#15022,1.); +#15022 = DIRECTION('',(1.,0.,0.)); +#15023 = CYLINDRICAL_SURFACE('',#15024,3.E-02); +#15024 = AXIS2_PLACEMENT_3D('',#15025,#15026,#15027); +#15025 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#15026 = DIRECTION('',(1.,0.,0.)); +#15027 = DIRECTION('',(-0.,1.,0.)); +#15028 = ADVANCED_FACE('',(#15029),#15040,.T.); +#15029 = FACE_BOUND('',#15030,.T.); +#15030 = EDGE_LOOP('',(#15031,#15037,#15038,#15039)); +#15031 = ORIENTED_EDGE('',*,*,#15032,.F.); +#15032 = EDGE_CURVE('',#14983,#15010,#15033,.T.); +#15033 = LINE('',#15034,#15035); +#15034 = CARTESIAN_POINT('',(-0.5,0.4,0.)); +#15035 = VECTOR('',#15036,1.); +#15036 = DIRECTION('',(0.,0.,1.)); +#15037 = ORIENTED_EDGE('',*,*,#14982,.F.); +#15038 = ORIENTED_EDGE('',*,*,#14813,.T.); +#15039 = ORIENTED_EDGE('',*,*,#15018,.T.); +#15040 = PLANE('',#15041); +#15041 = AXIS2_PLACEMENT_3D('',#15042,#15043,#15044); +#15042 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#15043 = DIRECTION('',(0.,1.,0.)); +#15044 = DIRECTION('',(0.,-0.,1.)); +#15045 = ADVANCED_FACE('',(#15046,#15056),#15126,.T.); +#15046 = FACE_BOUND('',#15047,.T.); +#15047 = EDGE_LOOP('',(#15048,#15049,#15050,#15051,#15052,#15053,#15054, + #15055)); +#15048 = ORIENTED_EDGE('',*,*,#14853,.F.); +#15049 = ORIENTED_EDGE('',*,*,#14893,.T.); +#15050 = ORIENTED_EDGE('',*,*,#14936,.T.); +#15051 = ORIENTED_EDGE('',*,*,#14990,.F.); +#15052 = ORIENTED_EDGE('',*,*,#15032,.T.); +#15053 = ORIENTED_EDGE('',*,*,#15009,.T.); +#15054 = ORIENTED_EDGE('',*,*,#14960,.F.); +#15055 = ORIENTED_EDGE('',*,*,#14910,.F.); +#15056 = FACE_BOUND('',#15057,.T.); +#15057 = EDGE_LOOP('',(#15058,#15069,#15077,#15086,#15094,#15103,#15111, + #15120)); +#15058 = ORIENTED_EDGE('',*,*,#15059,.F.); +#15059 = EDGE_CURVE('',#15060,#15062,#15064,.T.); +#15060 = VERTEX_POINT('',#15061); +#15061 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#15062 = VERTEX_POINT('',#15063); +#15063 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#15064 = CIRCLE('',#15065,3.E-02); +#15065 = AXIS2_PLACEMENT_3D('',#15066,#15067,#15068); +#15066 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#15067 = DIRECTION('',(1.,0.,-0.)); +#15068 = DIRECTION('',(0.,0.,1.)); +#15069 = ORIENTED_EDGE('',*,*,#15070,.T.); +#15070 = EDGE_CURVE('',#15060,#15071,#15073,.T.); +#15071 = VERTEX_POINT('',#15072); +#15072 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#15073 = LINE('',#15074,#15075); +#15074 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15075 = VECTOR('',#15076,1.); +#15076 = DIRECTION('',(0.,0.,1.)); +#15077 = ORIENTED_EDGE('',*,*,#15078,.T.); +#15078 = EDGE_CURVE('',#15071,#15079,#15081,.T.); +#15079 = VERTEX_POINT('',#15080); +#15080 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#15081 = CIRCLE('',#15082,3.E-02); +#15082 = AXIS2_PLACEMENT_3D('',#15083,#15084,#15085); +#15083 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#15084 = DIRECTION('',(-1.,0.,0.)); +#15085 = DIRECTION('',(0.,0.,1.)); +#15086 = ORIENTED_EDGE('',*,*,#15087,.T.); +#15087 = EDGE_CURVE('',#15079,#15088,#15090,.T.); +#15088 = VERTEX_POINT('',#15089); +#15089 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#15090 = LINE('',#15091,#15092); +#15091 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#15092 = VECTOR('',#15093,1.); +#15093 = DIRECTION('',(0.,1.,0.)); +#15094 = ORIENTED_EDGE('',*,*,#15095,.F.); +#15095 = EDGE_CURVE('',#15096,#15088,#15098,.T.); +#15096 = VERTEX_POINT('',#15097); +#15097 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#15098 = CIRCLE('',#15099,3.E-02); +#15099 = AXIS2_PLACEMENT_3D('',#15100,#15101,#15102); +#15100 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#15101 = DIRECTION('',(1.,0.,-0.)); +#15102 = DIRECTION('',(0.,0.,1.)); +#15103 = ORIENTED_EDGE('',*,*,#15104,.F.); +#15104 = EDGE_CURVE('',#15105,#15096,#15107,.T.); +#15105 = VERTEX_POINT('',#15106); +#15106 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#15107 = LINE('',#15108,#15109); +#15108 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#15109 = VECTOR('',#15110,1.); +#15110 = DIRECTION('',(0.,0.,1.)); +#15111 = ORIENTED_EDGE('',*,*,#15112,.T.); +#15112 = EDGE_CURVE('',#15105,#15113,#15115,.T.); +#15113 = VERTEX_POINT('',#15114); +#15114 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#15115 = CIRCLE('',#15116,3.E-02); +#15116 = AXIS2_PLACEMENT_3D('',#15117,#15118,#15119); +#15117 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#15118 = DIRECTION('',(-1.,0.,0.)); +#15119 = DIRECTION('',(0.,0.,1.)); +#15120 = ORIENTED_EDGE('',*,*,#15121,.F.); +#15121 = EDGE_CURVE('',#15062,#15113,#15122,.T.); +#15122 = LINE('',#15123,#15124); +#15123 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15124 = VECTOR('',#15125,1.); +#15125 = DIRECTION('',(0.,1.,0.)); +#15126 = PLANE('',#15127); +#15127 = AXIS2_PLACEMENT_3D('',#15128,#15129,#15130); +#15128 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#15129 = DIRECTION('',(1.,0.,0.)); +#15130 = DIRECTION('',(0.,0.,1.)); +#15131 = ADVANCED_FACE('',(#15132),#15158,.T.); +#15132 = FACE_BOUND('',#15133,.T.); +#15133 = EDGE_LOOP('',(#15134,#15135,#15143,#15152)); +#15134 = ORIENTED_EDGE('',*,*,#15059,.T.); +#15135 = ORIENTED_EDGE('',*,*,#15136,.T.); +#15136 = EDGE_CURVE('',#15062,#15137,#15139,.T.); +#15137 = VERTEX_POINT('',#15138); +#15138 = CARTESIAN_POINT('',(0.5,-0.34,3.E-02)); +#15139 = LINE('',#15140,#15141); +#15140 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#15141 = VECTOR('',#15142,1.); +#15142 = DIRECTION('',(1.,0.,0.)); +#15143 = ORIENTED_EDGE('',*,*,#15144,.F.); +#15144 = EDGE_CURVE('',#15145,#15137,#15147,.T.); +#15145 = VERTEX_POINT('',#15146); +#15146 = CARTESIAN_POINT('',(0.5,-0.37,6.E-02)); +#15147 = CIRCLE('',#15148,3.E-02); +#15148 = AXIS2_PLACEMENT_3D('',#15149,#15150,#15151); +#15149 = CARTESIAN_POINT('',(0.5,-0.34,6.E-02)); +#15150 = DIRECTION('',(1.,0.,-0.)); +#15151 = DIRECTION('',(0.,0.,1.)); +#15152 = ORIENTED_EDGE('',*,*,#15153,.F.); +#15153 = EDGE_CURVE('',#15060,#15145,#15154,.T.); +#15154 = LINE('',#15155,#15156); +#15155 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#15156 = VECTOR('',#15157,1.); +#15157 = DIRECTION('',(1.,0.,0.)); +#15158 = CYLINDRICAL_SURFACE('',#15159,3.E-02); +#15159 = AXIS2_PLACEMENT_3D('',#15160,#15161,#15162); +#15160 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#15161 = DIRECTION('',(1.,0.,0.)); +#15162 = DIRECTION('',(0.,-1.,0.)); +#15163 = ADVANCED_FACE('',(#15164),#15182,.F.); +#15164 = FACE_BOUND('',#15165,.F.); +#15165 = EDGE_LOOP('',(#15166,#15167,#15168,#15176)); +#15166 = ORIENTED_EDGE('',*,*,#15121,.F.); +#15167 = ORIENTED_EDGE('',*,*,#15136,.T.); +#15168 = ORIENTED_EDGE('',*,*,#15169,.T.); +#15169 = EDGE_CURVE('',#15137,#15170,#15172,.T.); +#15170 = VERTEX_POINT('',#15171); +#15171 = CARTESIAN_POINT('',(0.5,0.34,3.E-02)); +#15172 = LINE('',#15173,#15174); +#15173 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15174 = VECTOR('',#15175,1.); +#15175 = DIRECTION('',(0.,1.,0.)); +#15176 = ORIENTED_EDGE('',*,*,#15177,.F.); +#15177 = EDGE_CURVE('',#15113,#15170,#15178,.T.); +#15178 = LINE('',#15179,#15180); +#15179 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#15180 = VECTOR('',#15181,1.); +#15181 = DIRECTION('',(1.,0.,0.)); +#15182 = PLANE('',#15183); +#15183 = AXIS2_PLACEMENT_3D('',#15184,#15185,#15186); +#15184 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15185 = DIRECTION('',(0.,0.,1.)); +#15186 = DIRECTION('',(1.,0.,-0.)); +#15187 = ADVANCED_FACE('',(#15188),#15207,.T.); +#15188 = FACE_BOUND('',#15189,.T.); +#15189 = EDGE_LOOP('',(#15190,#15198,#15205,#15206)); +#15190 = ORIENTED_EDGE('',*,*,#15191,.T.); +#15191 = EDGE_CURVE('',#15105,#15192,#15194,.T.); +#15192 = VERTEX_POINT('',#15193); +#15193 = CARTESIAN_POINT('',(0.5,0.37,6.E-02)); +#15194 = LINE('',#15195,#15196); +#15195 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#15196 = VECTOR('',#15197,1.); +#15197 = DIRECTION('',(1.,0.,0.)); +#15198 = ORIENTED_EDGE('',*,*,#15199,.T.); +#15199 = EDGE_CURVE('',#15192,#15170,#15200,.T.); +#15200 = CIRCLE('',#15201,3.E-02); +#15201 = AXIS2_PLACEMENT_3D('',#15202,#15203,#15204); +#15202 = CARTESIAN_POINT('',(0.5,0.34,6.E-02)); +#15203 = DIRECTION('',(-1.,0.,0.)); +#15204 = DIRECTION('',(0.,0.,1.)); +#15205 = ORIENTED_EDGE('',*,*,#15177,.F.); +#15206 = ORIENTED_EDGE('',*,*,#15112,.F.); +#15207 = CYLINDRICAL_SURFACE('',#15208,3.E-02); +#15208 = AXIS2_PLACEMENT_3D('',#15209,#15210,#15211); +#15209 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#15210 = DIRECTION('',(1.,0.,0.)); +#15211 = DIRECTION('',(-0.,1.,0.)); +#15212 = ADVANCED_FACE('',(#15213),#15231,.T.); +#15213 = FACE_BOUND('',#15214,.T.); +#15214 = EDGE_LOOP('',(#15215,#15223,#15224,#15225)); +#15215 = ORIENTED_EDGE('',*,*,#15216,.F.); +#15216 = EDGE_CURVE('',#15192,#15217,#15219,.T.); +#15217 = VERTEX_POINT('',#15218); +#15218 = CARTESIAN_POINT('',(0.5,0.37,0.74)); +#15219 = LINE('',#15220,#15221); +#15220 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#15221 = VECTOR('',#15222,1.); +#15222 = DIRECTION('',(0.,0.,1.)); +#15223 = ORIENTED_EDGE('',*,*,#15191,.F.); +#15224 = ORIENTED_EDGE('',*,*,#15104,.T.); +#15225 = ORIENTED_EDGE('',*,*,#15226,.T.); +#15226 = EDGE_CURVE('',#15096,#15217,#15227,.T.); +#15227 = LINE('',#15228,#15229); +#15228 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#15229 = VECTOR('',#15230,1.); +#15230 = DIRECTION('',(1.,0.,0.)); +#15231 = PLANE('',#15232); +#15232 = AXIS2_PLACEMENT_3D('',#15233,#15234,#15235); +#15233 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#15234 = DIRECTION('',(0.,1.,0.)); +#15235 = DIRECTION('',(0.,-0.,1.)); +#15236 = ADVANCED_FACE('',(#15237),#15256,.T.); +#15237 = FACE_BOUND('',#15238,.T.); +#15238 = EDGE_LOOP('',(#15239,#15240,#15248,#15255)); +#15239 = ORIENTED_EDGE('',*,*,#15095,.T.); +#15240 = ORIENTED_EDGE('',*,*,#15241,.T.); +#15241 = EDGE_CURVE('',#15088,#15242,#15244,.T.); +#15242 = VERTEX_POINT('',#15243); +#15243 = CARTESIAN_POINT('',(0.5,0.34,0.77)); +#15244 = LINE('',#15245,#15246); +#15245 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#15246 = VECTOR('',#15247,1.); +#15247 = DIRECTION('',(1.,0.,0.)); +#15248 = ORIENTED_EDGE('',*,*,#15249,.F.); +#15249 = EDGE_CURVE('',#15217,#15242,#15250,.T.); +#15250 = CIRCLE('',#15251,3.E-02); +#15251 = AXIS2_PLACEMENT_3D('',#15252,#15253,#15254); +#15252 = CARTESIAN_POINT('',(0.5,0.34,0.74)); +#15253 = DIRECTION('',(1.,0.,-0.)); +#15254 = DIRECTION('',(0.,0.,1.)); +#15255 = ORIENTED_EDGE('',*,*,#15226,.F.); +#15256 = CYLINDRICAL_SURFACE('',#15257,3.E-02); +#15257 = AXIS2_PLACEMENT_3D('',#15258,#15259,#15260); +#15258 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#15259 = DIRECTION('',(1.,0.,0.)); +#15260 = DIRECTION('',(-0.,1.,0.)); +#15261 = ADVANCED_FACE('',(#15262),#15280,.T.); +#15262 = FACE_BOUND('',#15263,.T.); +#15263 = EDGE_LOOP('',(#15264,#15265,#15273,#15279)); +#15264 = ORIENTED_EDGE('',*,*,#15087,.F.); +#15265 = ORIENTED_EDGE('',*,*,#15266,.T.); +#15266 = EDGE_CURVE('',#15079,#15267,#15269,.T.); +#15267 = VERTEX_POINT('',#15268); +#15268 = CARTESIAN_POINT('',(0.5,-0.34,0.77)); +#15269 = LINE('',#15270,#15271); +#15270 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#15271 = VECTOR('',#15272,1.); +#15272 = DIRECTION('',(1.,0.,0.)); +#15273 = ORIENTED_EDGE('',*,*,#15274,.T.); +#15274 = EDGE_CURVE('',#15267,#15242,#15275,.T.); +#15275 = LINE('',#15276,#15277); +#15276 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#15277 = VECTOR('',#15278,1.); +#15278 = DIRECTION('',(0.,1.,0.)); +#15279 = ORIENTED_EDGE('',*,*,#15241,.F.); +#15280 = PLANE('',#15281); +#15281 = AXIS2_PLACEMENT_3D('',#15282,#15283,#15284); +#15282 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#15283 = DIRECTION('',(0.,0.,1.)); +#15284 = DIRECTION('',(1.,0.,-0.)); +#15285 = ADVANCED_FACE('',(#15286),#15305,.T.); +#15286 = FACE_BOUND('',#15287,.T.); +#15287 = EDGE_LOOP('',(#15288,#15296,#15303,#15304)); +#15288 = ORIENTED_EDGE('',*,*,#15289,.T.); +#15289 = EDGE_CURVE('',#15071,#15290,#15292,.T.); +#15290 = VERTEX_POINT('',#15291); +#15291 = CARTESIAN_POINT('',(0.5,-0.37,0.74)); +#15292 = LINE('',#15293,#15294); +#15293 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#15294 = VECTOR('',#15295,1.); +#15295 = DIRECTION('',(1.,0.,0.)); +#15296 = ORIENTED_EDGE('',*,*,#15297,.T.); +#15297 = EDGE_CURVE('',#15290,#15267,#15298,.T.); +#15298 = CIRCLE('',#15299,3.E-02); +#15299 = AXIS2_PLACEMENT_3D('',#15300,#15301,#15302); +#15300 = CARTESIAN_POINT('',(0.5,-0.34,0.74)); +#15301 = DIRECTION('',(-1.,0.,0.)); +#15302 = DIRECTION('',(0.,0.,1.)); +#15303 = ORIENTED_EDGE('',*,*,#15266,.F.); +#15304 = ORIENTED_EDGE('',*,*,#15078,.F.); +#15305 = CYLINDRICAL_SURFACE('',#15306,3.E-02); +#15306 = AXIS2_PLACEMENT_3D('',#15307,#15308,#15309); +#15307 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#15308 = DIRECTION('',(1.,0.,0.)); +#15309 = DIRECTION('',(0.,-1.,0.)); +#15310 = ADVANCED_FACE('',(#15311),#15322,.F.); +#15311 = FACE_BOUND('',#15312,.F.); +#15312 = EDGE_LOOP('',(#15313,#15319,#15320,#15321)); +#15313 = ORIENTED_EDGE('',*,*,#15314,.F.); +#15314 = EDGE_CURVE('',#15145,#15290,#15315,.T.); +#15315 = LINE('',#15316,#15317); +#15316 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15317 = VECTOR('',#15318,1.); +#15318 = DIRECTION('',(0.,0.,1.)); +#15319 = ORIENTED_EDGE('',*,*,#15153,.F.); +#15320 = ORIENTED_EDGE('',*,*,#15070,.T.); +#15321 = ORIENTED_EDGE('',*,*,#15289,.T.); +#15322 = PLANE('',#15323); +#15323 = AXIS2_PLACEMENT_3D('',#15324,#15325,#15326); +#15324 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15325 = DIRECTION('',(0.,1.,0.)); +#15326 = DIRECTION('',(0.,-0.,1.)); +#15327 = ADVANCED_FACE('',(#15328,#15398),#15408,.F.); +#15328 = FACE_BOUND('',#15329,.F.); +#15329 = EDGE_LOOP('',(#15330,#15340,#15349,#15357,#15366,#15374,#15383, + #15391)); +#15330 = ORIENTED_EDGE('',*,*,#15331,.F.); +#15331 = EDGE_CURVE('',#15332,#15334,#15336,.T.); +#15332 = VERTEX_POINT('',#15333); +#15333 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#15334 = VERTEX_POINT('',#15335); +#15335 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#15336 = LINE('',#15337,#15338); +#15337 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15338 = VECTOR('',#15339,1.); +#15339 = DIRECTION('',(0.,0.,1.)); +#15340 = ORIENTED_EDGE('',*,*,#15341,.T.); +#15341 = EDGE_CURVE('',#15332,#15342,#15344,.T.); +#15342 = VERTEX_POINT('',#15343); +#15343 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#15344 = CIRCLE('',#15345,3.E-02); +#15345 = AXIS2_PLACEMENT_3D('',#15346,#15347,#15348); +#15346 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15347 = DIRECTION('',(1.,0.,-0.)); +#15348 = DIRECTION('',(0.,0.,1.)); +#15349 = ORIENTED_EDGE('',*,*,#15350,.T.); +#15350 = EDGE_CURVE('',#15342,#15351,#15353,.T.); +#15351 = VERTEX_POINT('',#15352); +#15352 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#15353 = LINE('',#15354,#15355); +#15354 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15355 = VECTOR('',#15356,1.); +#15356 = DIRECTION('',(0.,1.,0.)); +#15357 = ORIENTED_EDGE('',*,*,#15358,.F.); +#15358 = EDGE_CURVE('',#15359,#15351,#15361,.T.); +#15359 = VERTEX_POINT('',#15360); +#15360 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#15361 = CIRCLE('',#15362,3.E-02); +#15362 = AXIS2_PLACEMENT_3D('',#15363,#15364,#15365); +#15363 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#15364 = DIRECTION('',(-1.,0.,0.)); +#15365 = DIRECTION('',(0.,0.,1.)); +#15366 = ORIENTED_EDGE('',*,*,#15367,.T.); +#15367 = EDGE_CURVE('',#15359,#15368,#15370,.T.); +#15368 = VERTEX_POINT('',#15369); +#15369 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#15370 = LINE('',#15371,#15372); +#15371 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#15372 = VECTOR('',#15373,1.); +#15373 = DIRECTION('',(0.,0.,1.)); +#15374 = ORIENTED_EDGE('',*,*,#15375,.T.); +#15375 = EDGE_CURVE('',#15368,#15376,#15378,.T.); +#15376 = VERTEX_POINT('',#15377); +#15377 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#15378 = CIRCLE('',#15379,3.E-02); +#15379 = AXIS2_PLACEMENT_3D('',#15380,#15381,#15382); +#15380 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#15381 = DIRECTION('',(1.,0.,-0.)); +#15382 = DIRECTION('',(0.,0.,1.)); +#15383 = ORIENTED_EDGE('',*,*,#15384,.F.); +#15384 = EDGE_CURVE('',#15385,#15376,#15387,.T.); +#15385 = VERTEX_POINT('',#15386); +#15386 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#15387 = LINE('',#15388,#15389); +#15388 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#15389 = VECTOR('',#15390,1.); +#15390 = DIRECTION('',(0.,1.,0.)); +#15391 = ORIENTED_EDGE('',*,*,#15392,.F.); +#15392 = EDGE_CURVE('',#15334,#15385,#15393,.T.); +#15393 = CIRCLE('',#15394,3.E-02); +#15394 = AXIS2_PLACEMENT_3D('',#15395,#15396,#15397); +#15395 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#15396 = DIRECTION('',(-1.,0.,0.)); +#15397 = DIRECTION('',(0.,0.,1.)); +#15398 = FACE_BOUND('',#15399,.F.); +#15399 = EDGE_LOOP('',(#15400,#15401,#15402,#15403,#15404,#15405,#15406, + #15407)); +#15400 = ORIENTED_EDGE('',*,*,#15144,.F.); +#15401 = ORIENTED_EDGE('',*,*,#15314,.T.); +#15402 = ORIENTED_EDGE('',*,*,#15297,.T.); +#15403 = ORIENTED_EDGE('',*,*,#15274,.T.); +#15404 = ORIENTED_EDGE('',*,*,#15249,.F.); +#15405 = ORIENTED_EDGE('',*,*,#15216,.F.); +#15406 = ORIENTED_EDGE('',*,*,#15199,.T.); +#15407 = ORIENTED_EDGE('',*,*,#15169,.F.); +#15408 = PLANE('',#15409); +#15409 = AXIS2_PLACEMENT_3D('',#15410,#15411,#15412); +#15410 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15411 = DIRECTION('',(1.,0.,0.)); +#15412 = DIRECTION('',(0.,0.,1.)); +#15413 = ADVANCED_FACE('',(#15414),#15439,.F.); +#15414 = FACE_BOUND('',#15415,.F.); +#15415 = EDGE_LOOP('',(#15416,#15426,#15432,#15433)); +#15416 = ORIENTED_EDGE('',*,*,#15417,.F.); +#15417 = EDGE_CURVE('',#15418,#15420,#15422,.T.); +#15418 = VERTEX_POINT('',#15419); +#15419 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#15420 = VERTEX_POINT('',#15421); +#15421 = CARTESIAN_POINT('',(0.8,-0.4,0.77)); +#15422 = LINE('',#15423,#15424); +#15423 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#15424 = VECTOR('',#15425,1.); +#15425 = DIRECTION('',(0.,0.,1.)); +#15426 = ORIENTED_EDGE('',*,*,#15427,.F.); +#15427 = EDGE_CURVE('',#15332,#15418,#15428,.T.); +#15428 = LINE('',#15429,#15430); +#15429 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#15430 = VECTOR('',#15431,1.); +#15431 = DIRECTION('',(1.,0.,0.)); +#15432 = ORIENTED_EDGE('',*,*,#15331,.T.); +#15433 = ORIENTED_EDGE('',*,*,#15434,.T.); +#15434 = EDGE_CURVE('',#15334,#15420,#15435,.T.); +#15435 = LINE('',#15436,#15437); +#15436 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#15437 = VECTOR('',#15438,1.); +#15438 = DIRECTION('',(1.,0.,0.)); +#15439 = PLANE('',#15440); +#15440 = AXIS2_PLACEMENT_3D('',#15441,#15442,#15443); +#15441 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15442 = DIRECTION('',(0.,1.,0.)); +#15443 = DIRECTION('',(0.,-0.,1.)); +#15444 = ADVANCED_FACE('',(#15445),#15464,.T.); +#15445 = FACE_BOUND('',#15446,.T.); +#15446 = EDGE_LOOP('',(#15447,#15448,#15456,#15463)); +#15447 = ORIENTED_EDGE('',*,*,#15341,.T.); +#15448 = ORIENTED_EDGE('',*,*,#15449,.T.); +#15449 = EDGE_CURVE('',#15342,#15450,#15452,.T.); +#15450 = VERTEX_POINT('',#15451); +#15451 = CARTESIAN_POINT('',(0.8,-0.37,0.)); +#15452 = LINE('',#15453,#15454); +#15453 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#15454 = VECTOR('',#15455,1.); +#15455 = DIRECTION('',(1.,0.,0.)); +#15456 = ORIENTED_EDGE('',*,*,#15457,.F.); +#15457 = EDGE_CURVE('',#15418,#15450,#15458,.T.); +#15458 = CIRCLE('',#15459,3.E-02); +#15459 = AXIS2_PLACEMENT_3D('',#15460,#15461,#15462); +#15460 = CARTESIAN_POINT('',(0.8,-0.37,3.E-02)); +#15461 = DIRECTION('',(1.,0.,-0.)); +#15462 = DIRECTION('',(0.,0.,1.)); +#15463 = ORIENTED_EDGE('',*,*,#15427,.F.); +#15464 = CYLINDRICAL_SURFACE('',#15465,3.E-02); +#15465 = AXIS2_PLACEMENT_3D('',#15466,#15467,#15468); +#15466 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15467 = DIRECTION('',(1.,0.,0.)); +#15468 = DIRECTION('',(0.,-1.,0.)); +#15469 = ADVANCED_FACE('',(#15470),#15489,.T.); +#15470 = FACE_BOUND('',#15471,.T.); +#15471 = EDGE_LOOP('',(#15472,#15473,#15482,#15488)); +#15472 = ORIENTED_EDGE('',*,*,#15434,.T.); +#15473 = ORIENTED_EDGE('',*,*,#15474,.T.); +#15474 = EDGE_CURVE('',#15420,#15475,#15477,.T.); +#15475 = VERTEX_POINT('',#15476); +#15476 = CARTESIAN_POINT('',(0.8,-0.37,0.8)); +#15477 = CIRCLE('',#15478,3.E-02); +#15478 = AXIS2_PLACEMENT_3D('',#15479,#15480,#15481); +#15479 = CARTESIAN_POINT('',(0.8,-0.37,0.77)); +#15480 = DIRECTION('',(-1.,0.,0.)); +#15481 = DIRECTION('',(0.,0.,1.)); +#15482 = ORIENTED_EDGE('',*,*,#15483,.F.); +#15483 = EDGE_CURVE('',#15385,#15475,#15484,.T.); +#15484 = LINE('',#15485,#15486); +#15485 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#15486 = VECTOR('',#15487,1.); +#15487 = DIRECTION('',(1.,0.,0.)); +#15488 = ORIENTED_EDGE('',*,*,#15392,.F.); +#15489 = CYLINDRICAL_SURFACE('',#15490,3.E-02); +#15490 = AXIS2_PLACEMENT_3D('',#15491,#15492,#15493); +#15491 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#15492 = DIRECTION('',(1.,0.,0.)); +#15493 = DIRECTION('',(0.,-1.,0.)); +#15494 = ADVANCED_FACE('',(#15495),#15513,.F.); +#15495 = FACE_BOUND('',#15496,.F.); +#15496 = EDGE_LOOP('',(#15497,#15498,#15499,#15507)); +#15497 = ORIENTED_EDGE('',*,*,#15350,.F.); +#15498 = ORIENTED_EDGE('',*,*,#15449,.T.); +#15499 = ORIENTED_EDGE('',*,*,#15500,.T.); +#15500 = EDGE_CURVE('',#15450,#15501,#15503,.T.); +#15501 = VERTEX_POINT('',#15502); +#15502 = CARTESIAN_POINT('',(0.8,0.37,0.)); +#15503 = LINE('',#15504,#15505); +#15504 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#15505 = VECTOR('',#15506,1.); +#15506 = DIRECTION('',(0.,1.,0.)); +#15507 = ORIENTED_EDGE('',*,*,#15508,.F.); +#15508 = EDGE_CURVE('',#15351,#15501,#15509,.T.); +#15509 = LINE('',#15510,#15511); +#15510 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#15511 = VECTOR('',#15512,1.); +#15512 = DIRECTION('',(1.,0.,0.)); +#15513 = PLANE('',#15514); +#15514 = AXIS2_PLACEMENT_3D('',#15515,#15516,#15517); +#15515 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15516 = DIRECTION('',(0.,0.,1.)); +#15517 = DIRECTION('',(1.,0.,-0.)); +#15518 = ADVANCED_FACE('',(#15519),#15537,.T.); +#15519 = FACE_BOUND('',#15520,.T.); +#15520 = EDGE_LOOP('',(#15521,#15522,#15523,#15531)); +#15521 = ORIENTED_EDGE('',*,*,#15384,.F.); +#15522 = ORIENTED_EDGE('',*,*,#15483,.T.); +#15523 = ORIENTED_EDGE('',*,*,#15524,.T.); +#15524 = EDGE_CURVE('',#15475,#15525,#15527,.T.); +#15525 = VERTEX_POINT('',#15526); +#15526 = CARTESIAN_POINT('',(0.8,0.37,0.8)); +#15527 = LINE('',#15528,#15529); +#15528 = CARTESIAN_POINT('',(0.8,-0.4,0.8)); +#15529 = VECTOR('',#15530,1.); +#15530 = DIRECTION('',(0.,1.,0.)); +#15531 = ORIENTED_EDGE('',*,*,#15532,.F.); +#15532 = EDGE_CURVE('',#15376,#15525,#15533,.T.); +#15533 = LINE('',#15534,#15535); +#15534 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#15535 = VECTOR('',#15536,1.); +#15536 = DIRECTION('',(1.,0.,0.)); +#15537 = PLANE('',#15538); +#15538 = AXIS2_PLACEMENT_3D('',#15539,#15540,#15541); +#15539 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#15540 = DIRECTION('',(0.,0.,1.)); +#15541 = DIRECTION('',(1.,0.,-0.)); +#15542 = ADVANCED_FACE('',(#15543),#15562,.T.); +#15543 = FACE_BOUND('',#15544,.T.); +#15544 = EDGE_LOOP('',(#15545,#15553,#15560,#15561)); +#15545 = ORIENTED_EDGE('',*,*,#15546,.T.); +#15546 = EDGE_CURVE('',#15359,#15547,#15549,.T.); +#15547 = VERTEX_POINT('',#15548); +#15548 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#15549 = LINE('',#15550,#15551); +#15550 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#15551 = VECTOR('',#15552,1.); +#15552 = DIRECTION('',(1.,0.,0.)); +#15553 = ORIENTED_EDGE('',*,*,#15554,.T.); +#15554 = EDGE_CURVE('',#15547,#15501,#15555,.T.); +#15555 = CIRCLE('',#15556,3.E-02); +#15556 = AXIS2_PLACEMENT_3D('',#15557,#15558,#15559); +#15557 = CARTESIAN_POINT('',(0.8,0.37,3.E-02)); +#15558 = DIRECTION('',(-1.,0.,0.)); +#15559 = DIRECTION('',(0.,0.,1.)); +#15560 = ORIENTED_EDGE('',*,*,#15508,.F.); +#15561 = ORIENTED_EDGE('',*,*,#15358,.F.); +#15562 = CYLINDRICAL_SURFACE('',#15563,3.E-02); +#15563 = AXIS2_PLACEMENT_3D('',#15564,#15565,#15566); +#15564 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#15565 = DIRECTION('',(1.,0.,0.)); +#15566 = DIRECTION('',(-0.,1.,0.)); +#15567 = ADVANCED_FACE('',(#15568),#15587,.T.); +#15568 = FACE_BOUND('',#15569,.T.); +#15569 = EDGE_LOOP('',(#15570,#15571,#15572,#15581)); +#15570 = ORIENTED_EDGE('',*,*,#15375,.T.); +#15571 = ORIENTED_EDGE('',*,*,#15532,.T.); +#15572 = ORIENTED_EDGE('',*,*,#15573,.F.); +#15573 = EDGE_CURVE('',#15574,#15525,#15576,.T.); +#15574 = VERTEX_POINT('',#15575); +#15575 = CARTESIAN_POINT('',(0.8,0.4,0.77)); +#15576 = CIRCLE('',#15577,3.E-02); +#15577 = AXIS2_PLACEMENT_3D('',#15578,#15579,#15580); +#15578 = CARTESIAN_POINT('',(0.8,0.37,0.77)); +#15579 = DIRECTION('',(1.,0.,-0.)); +#15580 = DIRECTION('',(0.,0.,1.)); +#15581 = ORIENTED_EDGE('',*,*,#15582,.F.); +#15582 = EDGE_CURVE('',#15368,#15574,#15583,.T.); +#15583 = LINE('',#15584,#15585); +#15584 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#15585 = VECTOR('',#15586,1.); +#15586 = DIRECTION('',(1.,0.,0.)); +#15587 = CYLINDRICAL_SURFACE('',#15588,3.E-02); +#15588 = AXIS2_PLACEMENT_3D('',#15589,#15590,#15591); +#15589 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#15590 = DIRECTION('',(1.,0.,0.)); +#15591 = DIRECTION('',(-0.,1.,0.)); +#15592 = ADVANCED_FACE('',(#15593),#15604,.T.); +#15593 = FACE_BOUND('',#15594,.T.); +#15594 = EDGE_LOOP('',(#15595,#15601,#15602,#15603)); +#15595 = ORIENTED_EDGE('',*,*,#15596,.F.); +#15596 = EDGE_CURVE('',#15547,#15574,#15597,.T.); +#15597 = LINE('',#15598,#15599); +#15598 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#15599 = VECTOR('',#15600,1.); +#15600 = DIRECTION('',(0.,0.,1.)); +#15601 = ORIENTED_EDGE('',*,*,#15546,.F.); +#15602 = ORIENTED_EDGE('',*,*,#15367,.T.); +#15603 = ORIENTED_EDGE('',*,*,#15582,.T.); +#15604 = PLANE('',#15605); +#15605 = AXIS2_PLACEMENT_3D('',#15606,#15607,#15608); +#15606 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#15607 = DIRECTION('',(0.,1.,0.)); +#15608 = DIRECTION('',(0.,-0.,1.)); +#15609 = ADVANCED_FACE('',(#15610),#15620,.T.); +#15610 = FACE_BOUND('',#15611,.T.); +#15611 = EDGE_LOOP('',(#15612,#15613,#15614,#15615,#15616,#15617,#15618, + #15619)); +#15612 = ORIENTED_EDGE('',*,*,#15417,.F.); +#15613 = ORIENTED_EDGE('',*,*,#15457,.T.); +#15614 = ORIENTED_EDGE('',*,*,#15500,.T.); +#15615 = ORIENTED_EDGE('',*,*,#15554,.F.); +#15616 = ORIENTED_EDGE('',*,*,#15596,.T.); +#15617 = ORIENTED_EDGE('',*,*,#15573,.T.); +#15618 = ORIENTED_EDGE('',*,*,#15524,.F.); +#15619 = ORIENTED_EDGE('',*,*,#15474,.F.); +#15620 = PLANE('',#15621); +#15621 = AXIS2_PLACEMENT_3D('',#15622,#15623,#15624); +#15622 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#15623 = DIRECTION('',(1.,0.,0.)); +#15624 = DIRECTION('',(0.,0.,1.)); +#15625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#15629)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#15626,#15627,#15628)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#15626 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#15627 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#15628 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#15629 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#15626, + 'distance_accuracy_value','confusion accuracy'); +#15630 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#15631,#15633); +#15631 = ( REPRESENTATION_RELATIONSHIP('','',#14770,#14747) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#15632) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#15632 = ITEM_DEFINED_TRANSFORMATION('','',#11,#14748); +#15633 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #15634); +#15634 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('16','=>[0:1:1:15]','',#14742, + #14765,$); +#15635 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#14767)); +#15636 = SHAPE_DEFINITION_REPRESENTATION(#15637,#15643); +#15637 = PRODUCT_DEFINITION_SHAPE('','',#15638); +#15638 = PRODUCT_DEFINITION('design','',#15639,#15642); +#15639 = PRODUCT_DEFINITION_FORMATION('','',#15640); +#15640 = PRODUCT('SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm', + 'SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm','',(#15641)); +#15641 = PRODUCT_CONTEXT('',#2,'mechanical'); +#15642 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#15643 = SHAPE_REPRESENTATION('',(#11,#15644),#15648); +#15644 = AXIS2_PLACEMENT_3D('',#15645,#15646,#15647); +#15645 = CARTESIAN_POINT('',(0.,0.,0.)); +#15646 = DIRECTION('',(0.,0.,1.)); +#15647 = DIRECTION('',(1.,0.,-0.)); +#15648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#15652)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#15649,#15650,#15651)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#15649 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#15650 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#15651 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#15652 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#15649, + 'distance_accuracy_value','confusion accuracy'); +#15653 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#15654,#15656); +#15654 = ( REPRESENTATION_RELATIONSHIP('','',#15643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#15655) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#15655 = ITEM_DEFINED_TRANSFORMATION('','',#11,#55); +#15656 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #15657); +#15657 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('19','U7','',#5,#15638,$); +#15658 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#15640)); +#15659 = SHAPE_DEFINITION_REPRESENTATION(#15660,#15666); +#15660 = PRODUCT_DEFINITION_SHAPE('','',#15661); +#15661 = PRODUCT_DEFINITION('design','',#15662,#15665); +#15662 = PRODUCT_DEFINITION_FORMATION('','',#15663); +#15663 = PRODUCT('SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm', + 'SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm','',(#15664)); +#15664 = PRODUCT_CONTEXT('',#2,'mechanical'); +#15665 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#15666 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15667),#20279); +#15667 = MANIFOLD_SOLID_BREP('',#15668); +#15668 = CLOSED_SHELL('',(#15669,#15707,#15804,#15827,#15856,#15879, + #15966,#16053,#16076,#16099,#16116,#16147,#16171,#16195,#16212, + #16235,#16323,#16339,#16369,#16400,#16431,#16462,#16493,#16524, + #16555,#16586,#16603,#16620,#16651,#16682,#16713,#16744,#16775, + #16806,#16837,#16867,#16890,#16913,#16930,#16942,#16987,#17073, + #17096,#17119,#17142,#17229,#17267,#17316,#17408,#17433,#17517, + #17539,#17631,#17656,#17740,#17762,#17854,#17879,#17963,#17980, + #18065,#18090,#18167,#18252,#18277,#18354,#18371,#18463,#18488, + #18572,#18594,#18686,#18711,#18795,#18817,#18909,#18934,#19018, + #19035,#19054,#19073,#19092,#19138,#19154,#19173,#19192,#19211, + #19227,#19244,#19256,#19273,#19290,#19307,#19324,#19341,#19358, + #19375,#19387,#19404,#19421,#19438,#19455,#19472,#19489,#19506, + #19518,#19535,#19552,#19569,#19586,#19603,#19620,#19637,#19649, + #19666,#19683,#19700,#19717,#19734,#19751,#19763,#19780,#19797, + #19814,#19831,#19848,#19865,#19877,#19894,#19911,#19928,#19945, + #19962,#19979,#19996,#20008,#20025,#20042,#20059,#20076,#20093, + #20110,#20127,#20139,#20156,#20173,#20190,#20207,#20224,#20241, + #20258,#20270)); +#15669 = ADVANCED_FACE('',(#15670),#15702,.F.); +#15670 = FACE_BOUND('',#15671,.F.); +#15671 = EDGE_LOOP('',(#15672,#15682,#15689,#15697)); +#15672 = ORIENTED_EDGE('',*,*,#15673,.T.); +#15673 = EDGE_CURVE('',#15674,#15676,#15678,.T.); +#15674 = VERTEX_POINT('',#15675); +#15675 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15676 = VERTEX_POINT('',#15677); +#15677 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15678 = LINE('',#15679,#15680); +#15679 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15680 = VECTOR('',#15681,1.); +#15681 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15682 = ORIENTED_EDGE('',*,*,#15683,.T.); +#15683 = EDGE_CURVE('',#15676,#15684,#15686,.T.); +#15684 = VERTEX_POINT('',#15685); +#15685 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15686 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15687,#15688),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15687 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15688 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15689 = ORIENTED_EDGE('',*,*,#15690,.F.); +#15690 = EDGE_CURVE('',#15691,#15684,#15693,.T.); +#15691 = VERTEX_POINT('',#15692); +#15692 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15693 = LINE('',#15694,#15695); +#15694 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15695 = VECTOR('',#15696,1.); +#15696 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15697 = ORIENTED_EDGE('',*,*,#15698,.F.); +#15698 = EDGE_CURVE('',#15674,#15691,#15699,.T.); +#15699 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15700,#15701),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15700 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15701 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15702 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15703,#15704) + ,(#15705,#15706 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#15703 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15704 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15705 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15706 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15707 = ADVANCED_FACE('',(#15708,#15765),#15799,.T.); +#15708 = FACE_BOUND('',#15709,.T.); +#15709 = EDGE_LOOP('',(#15710,#15711,#15719,#15727,#15735,#15743,#15751, + #15759)); +#15710 = ORIENTED_EDGE('',*,*,#15673,.T.); +#15711 = ORIENTED_EDGE('',*,*,#15712,.T.); +#15712 = EDGE_CURVE('',#15676,#15713,#15715,.T.); +#15713 = VERTEX_POINT('',#15714); +#15714 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15715 = LINE('',#15716,#15717); +#15716 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15717 = VECTOR('',#15718,1.); +#15718 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#15719 = ORIENTED_EDGE('',*,*,#15720,.T.); +#15720 = EDGE_CURVE('',#15713,#15721,#15723,.T.); +#15721 = VERTEX_POINT('',#15722); +#15722 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#15723 = LINE('',#15724,#15725); +#15724 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15725 = VECTOR('',#15726,1.); +#15726 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15727 = ORIENTED_EDGE('',*,*,#15728,.T.); +#15728 = EDGE_CURVE('',#15721,#15729,#15731,.T.); +#15729 = VERTEX_POINT('',#15730); +#15730 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#15731 = LINE('',#15732,#15733); +#15732 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#15733 = VECTOR('',#15734,1.); +#15734 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#15735 = ORIENTED_EDGE('',*,*,#15736,.T.); +#15736 = EDGE_CURVE('',#15729,#15737,#15739,.T.); +#15737 = VERTEX_POINT('',#15738); +#15738 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#15739 = LINE('',#15740,#15741); +#15740 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#15741 = VECTOR('',#15742,1.); +#15742 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#15743 = ORIENTED_EDGE('',*,*,#15744,.T.); +#15744 = EDGE_CURVE('',#15737,#15745,#15747,.T.); +#15745 = VERTEX_POINT('',#15746); +#15746 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15747 = LINE('',#15748,#15749); +#15748 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#15749 = VECTOR('',#15750,1.); +#15750 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#15751 = ORIENTED_EDGE('',*,*,#15752,.T.); +#15752 = EDGE_CURVE('',#15745,#15753,#15755,.T.); +#15753 = VERTEX_POINT('',#15754); +#15754 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15755 = LINE('',#15756,#15757); +#15756 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15757 = VECTOR('',#15758,1.); +#15758 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15759 = ORIENTED_EDGE('',*,*,#15760,.T.); +#15760 = EDGE_CURVE('',#15753,#15674,#15761,.T.); +#15761 = LINE('',#15762,#15763); +#15762 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15763 = VECTOR('',#15764,1.); +#15764 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#15765 = FACE_BOUND('',#15766,.T.); +#15766 = EDGE_LOOP('',(#15767,#15777,#15785,#15793)); +#15767 = ORIENTED_EDGE('',*,*,#15768,.F.); +#15768 = EDGE_CURVE('',#15769,#15771,#15773,.T.); +#15769 = VERTEX_POINT('',#15770); +#15770 = CARTESIAN_POINT('',(1.145,1.5,5.E-02)); +#15771 = VERTEX_POINT('',#15772); +#15772 = CARTESIAN_POINT('',(1.145,-1.5,5.E-02)); +#15773 = LINE('',#15774,#15775); +#15774 = CARTESIAN_POINT('',(1.145,1.5,5.E-02)); +#15775 = VECTOR('',#15776,1.); +#15776 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15777 = ORIENTED_EDGE('',*,*,#15778,.F.); +#15778 = EDGE_CURVE('',#15779,#15769,#15781,.T.); +#15779 = VERTEX_POINT('',#15780); +#15780 = CARTESIAN_POINT('',(-1.145,1.5,5.E-02)); +#15781 = LINE('',#15782,#15783); +#15782 = CARTESIAN_POINT('',(-1.145,1.5,5.E-02)); +#15783 = VECTOR('',#15784,1.); +#15784 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15785 = ORIENTED_EDGE('',*,*,#15786,.T.); +#15786 = EDGE_CURVE('',#15779,#15787,#15789,.T.); +#15787 = VERTEX_POINT('',#15788); +#15788 = CARTESIAN_POINT('',(-1.145,-1.5,5.E-02)); +#15789 = LINE('',#15790,#15791); +#15790 = CARTESIAN_POINT('',(-1.145,1.5,5.E-02)); +#15791 = VECTOR('',#15792,1.); +#15792 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15793 = ORIENTED_EDGE('',*,*,#15794,.T.); +#15794 = EDGE_CURVE('',#15787,#15771,#15795,.T.); +#15795 = LINE('',#15796,#15797); +#15796 = CARTESIAN_POINT('',(-1.145,-1.5,5.E-02)); +#15797 = VECTOR('',#15798,1.); +#15798 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15799 = PLANE('',#15800); +#15800 = AXIS2_PLACEMENT_3D('',#15801,#15802,#15803); +#15801 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15802 = DIRECTION('',(0.,0.,-1.)); +#15803 = DIRECTION('',(0.574848939807,-0.8182595532,0.)); +#15804 = ADVANCED_FACE('',(#15805),#15822,.F.); +#15805 = FACE_BOUND('',#15806,.F.); +#15806 = EDGE_LOOP('',(#15807,#15808,#15815,#15821)); +#15807 = ORIENTED_EDGE('',*,*,#15712,.T.); +#15808 = ORIENTED_EDGE('',*,*,#15809,.T.); +#15809 = EDGE_CURVE('',#15713,#15810,#15812,.T.); +#15810 = VERTEX_POINT('',#15811); +#15811 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15812 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15813,#15814),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15813 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15814 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15815 = ORIENTED_EDGE('',*,*,#15816,.F.); +#15816 = EDGE_CURVE('',#15684,#15810,#15817,.T.); +#15817 = LINE('',#15818,#15819); +#15818 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15819 = VECTOR('',#15820,1.); +#15820 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#15821 = ORIENTED_EDGE('',*,*,#15683,.F.); +#15822 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15823,#15824) + ,(#15825,#15826 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#15823 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15824 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15825 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15826 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15827 = ADVANCED_FACE('',(#15828),#15851,.F.); +#15828 = FACE_BOUND('',#15829,.F.); +#15829 = EDGE_LOOP('',(#15830,#15831,#15838,#15846)); +#15830 = ORIENTED_EDGE('',*,*,#15690,.T.); +#15831 = ORIENTED_EDGE('',*,*,#15832,.T.); +#15832 = EDGE_CURVE('',#15684,#15833,#15835,.T.); +#15833 = VERTEX_POINT('',#15834); +#15834 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#15835 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15836,#15837),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15836 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15837 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#15838 = ORIENTED_EDGE('',*,*,#15839,.F.); +#15839 = EDGE_CURVE('',#15840,#15833,#15842,.T.); +#15840 = VERTEX_POINT('',#15841); +#15841 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15842 = LINE('',#15843,#15844); +#15843 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15844 = VECTOR('',#15845,1.); +#15845 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15846 = ORIENTED_EDGE('',*,*,#15847,.F.); +#15847 = EDGE_CURVE('',#15691,#15840,#15848,.T.); +#15848 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15849,#15850),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15849 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15850 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15851 = PLANE('',#15852); +#15852 = AXIS2_PLACEMENT_3D('',#15853,#15854,#15855); +#15853 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15854 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15855 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15856 = ADVANCED_FACE('',(#15857),#15874,.F.); +#15857 = FACE_BOUND('',#15858,.F.); +#15858 = EDGE_LOOP('',(#15859,#15860,#15861,#15869)); +#15859 = ORIENTED_EDGE('',*,*,#15760,.T.); +#15860 = ORIENTED_EDGE('',*,*,#15698,.T.); +#15861 = ORIENTED_EDGE('',*,*,#15862,.F.); +#15862 = EDGE_CURVE('',#15863,#15691,#15865,.T.); +#15863 = VERTEX_POINT('',#15864); +#15864 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15865 = LINE('',#15866,#15867); +#15866 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15867 = VECTOR('',#15868,1.); +#15868 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#15869 = ORIENTED_EDGE('',*,*,#15870,.F.); +#15870 = EDGE_CURVE('',#15753,#15863,#15871,.T.); +#15871 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15872,#15873),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15872 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15873 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15874 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15875,#15876) + ,(#15877,#15878 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#15875 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15876 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15877 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15878 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15879 = ADVANCED_FACE('',(#15880),#15961,.F.); +#15880 = FACE_BOUND('',#15881,.F.); +#15881 = EDGE_LOOP('',(#15882,#15883,#15884,#15892,#15900,#15908,#15916, + #15924,#15932,#15940,#15948,#15956)); +#15882 = ORIENTED_EDGE('',*,*,#15752,.T.); +#15883 = ORIENTED_EDGE('',*,*,#15870,.T.); +#15884 = ORIENTED_EDGE('',*,*,#15885,.F.); +#15885 = EDGE_CURVE('',#15886,#15863,#15888,.T.); +#15886 = VERTEX_POINT('',#15887); +#15887 = CARTESIAN_POINT('',(-1.95,2.11,0.695)); +#15888 = LINE('',#15889,#15890); +#15889 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15890 = VECTOR('',#15891,1.); +#15891 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15892 = ORIENTED_EDGE('',*,*,#15893,.F.); +#15893 = EDGE_CURVE('',#15894,#15886,#15896,.T.); +#15894 = VERTEX_POINT('',#15895); +#15895 = CARTESIAN_POINT('',(-1.95,1.7,0.695)); +#15896 = LINE('',#15897,#15898); +#15897 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15898 = VECTOR('',#15899,1.); +#15899 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15900 = ORIENTED_EDGE('',*,*,#15901,.F.); +#15901 = EDGE_CURVE('',#15902,#15894,#15904,.T.); +#15902 = VERTEX_POINT('',#15903); +#15903 = CARTESIAN_POINT('',(-1.95,0.84,0.695)); +#15904 = LINE('',#15905,#15906); +#15905 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15906 = VECTOR('',#15907,1.); +#15907 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15908 = ORIENTED_EDGE('',*,*,#15909,.F.); +#15909 = EDGE_CURVE('',#15910,#15902,#15912,.T.); +#15910 = VERTEX_POINT('',#15911); +#15911 = CARTESIAN_POINT('',(-1.95,0.43,0.695)); +#15912 = LINE('',#15913,#15914); +#15913 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15914 = VECTOR('',#15915,1.); +#15915 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15916 = ORIENTED_EDGE('',*,*,#15917,.F.); +#15917 = EDGE_CURVE('',#15918,#15910,#15920,.T.); +#15918 = VERTEX_POINT('',#15919); +#15919 = CARTESIAN_POINT('',(-1.95,-0.43,0.695)); +#15920 = LINE('',#15921,#15922); +#15921 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15922 = VECTOR('',#15923,1.); +#15923 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15924 = ORIENTED_EDGE('',*,*,#15925,.F.); +#15925 = EDGE_CURVE('',#15926,#15918,#15928,.T.); +#15926 = VERTEX_POINT('',#15927); +#15927 = CARTESIAN_POINT('',(-1.95,-0.84,0.695)); +#15928 = LINE('',#15929,#15930); +#15929 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15930 = VECTOR('',#15931,1.); +#15931 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15932 = ORIENTED_EDGE('',*,*,#15933,.F.); +#15933 = EDGE_CURVE('',#15934,#15926,#15936,.T.); +#15934 = VERTEX_POINT('',#15935); +#15935 = CARTESIAN_POINT('',(-1.95,-1.7,0.695)); +#15936 = LINE('',#15937,#15938); +#15937 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15938 = VECTOR('',#15939,1.); +#15939 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15940 = ORIENTED_EDGE('',*,*,#15941,.F.); +#15941 = EDGE_CURVE('',#15942,#15934,#15944,.T.); +#15942 = VERTEX_POINT('',#15943); +#15943 = CARTESIAN_POINT('',(-1.95,-2.11,0.695)); +#15944 = LINE('',#15945,#15946); +#15945 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15946 = VECTOR('',#15947,1.); +#15947 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15948 = ORIENTED_EDGE('',*,*,#15949,.F.); +#15949 = EDGE_CURVE('',#15950,#15942,#15952,.T.); +#15950 = VERTEX_POINT('',#15951); +#15951 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15952 = LINE('',#15953,#15954); +#15953 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15954 = VECTOR('',#15955,1.); +#15955 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15956 = ORIENTED_EDGE('',*,*,#15957,.F.); +#15957 = EDGE_CURVE('',#15745,#15950,#15958,.T.); +#15958 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15959,#15960),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15959 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15960 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15961 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15962,#15963) + ,(#15964,#15965 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#15962 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15963 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15964 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15965 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15966 = ADVANCED_FACE('',(#15967),#16048,.F.); +#15967 = FACE_BOUND('',#15968,.F.); +#15968 = EDGE_LOOP('',(#15969,#15970,#15977,#15985,#15993,#16001,#16009, + #16017,#16025,#16033,#16041,#16047)); +#15969 = ORIENTED_EDGE('',*,*,#15720,.T.); +#15970 = ORIENTED_EDGE('',*,*,#15971,.T.); +#15971 = EDGE_CURVE('',#15721,#15972,#15974,.T.); +#15972 = VERTEX_POINT('',#15973); +#15973 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#15974 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15975,#15976),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15975 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#15976 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#15977 = ORIENTED_EDGE('',*,*,#15978,.F.); +#15978 = EDGE_CURVE('',#15979,#15972,#15981,.T.); +#15979 = VERTEX_POINT('',#15980); +#15980 = CARTESIAN_POINT('',(1.95,-2.11,0.695)); +#15981 = LINE('',#15982,#15983); +#15982 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15983 = VECTOR('',#15984,1.); +#15984 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15985 = ORIENTED_EDGE('',*,*,#15986,.F.); +#15986 = EDGE_CURVE('',#15987,#15979,#15989,.T.); +#15987 = VERTEX_POINT('',#15988); +#15988 = CARTESIAN_POINT('',(1.95,-1.7,0.695)); +#15989 = LINE('',#15990,#15991); +#15990 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15991 = VECTOR('',#15992,1.); +#15992 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15993 = ORIENTED_EDGE('',*,*,#15994,.F.); +#15994 = EDGE_CURVE('',#15995,#15987,#15997,.T.); +#15995 = VERTEX_POINT('',#15996); +#15996 = CARTESIAN_POINT('',(1.95,-0.84,0.695)); +#15997 = LINE('',#15998,#15999); +#15998 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15999 = VECTOR('',#16000,1.); +#16000 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16001 = ORIENTED_EDGE('',*,*,#16002,.F.); +#16002 = EDGE_CURVE('',#16003,#15995,#16005,.T.); +#16003 = VERTEX_POINT('',#16004); +#16004 = CARTESIAN_POINT('',(1.95,-0.43,0.695)); +#16005 = LINE('',#16006,#16007); +#16006 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16007 = VECTOR('',#16008,1.); +#16008 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16009 = ORIENTED_EDGE('',*,*,#16010,.F.); +#16010 = EDGE_CURVE('',#16011,#16003,#16013,.T.); +#16011 = VERTEX_POINT('',#16012); +#16012 = CARTESIAN_POINT('',(1.95,0.43,0.695)); +#16013 = LINE('',#16014,#16015); +#16014 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16015 = VECTOR('',#16016,1.); +#16016 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16017 = ORIENTED_EDGE('',*,*,#16018,.F.); +#16018 = EDGE_CURVE('',#16019,#16011,#16021,.T.); +#16019 = VERTEX_POINT('',#16020); +#16020 = CARTESIAN_POINT('',(1.95,0.84,0.695)); +#16021 = LINE('',#16022,#16023); +#16022 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16023 = VECTOR('',#16024,1.); +#16024 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16025 = ORIENTED_EDGE('',*,*,#16026,.F.); +#16026 = EDGE_CURVE('',#16027,#16019,#16029,.T.); +#16027 = VERTEX_POINT('',#16028); +#16028 = CARTESIAN_POINT('',(1.95,1.7,0.695)); +#16029 = LINE('',#16030,#16031); +#16030 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16031 = VECTOR('',#16032,1.); +#16032 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16033 = ORIENTED_EDGE('',*,*,#16034,.F.); +#16034 = EDGE_CURVE('',#16035,#16027,#16037,.T.); +#16035 = VERTEX_POINT('',#16036); +#16036 = CARTESIAN_POINT('',(1.95,2.11,0.695)); +#16037 = LINE('',#16038,#16039); +#16038 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16039 = VECTOR('',#16040,1.); +#16040 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16041 = ORIENTED_EDGE('',*,*,#16042,.F.); +#16042 = EDGE_CURVE('',#15810,#16035,#16043,.T.); +#16043 = LINE('',#16044,#16045); +#16044 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16045 = VECTOR('',#16046,1.); +#16046 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16047 = ORIENTED_EDGE('',*,*,#15809,.F.); +#16048 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16049,#16050) + ,(#16051,#16052 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#16049 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#16050 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16051 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#16052 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16053 = ADVANCED_FACE('',(#16054),#16071,.F.); +#16054 = FACE_BOUND('',#16055,.F.); +#16055 = EDGE_LOOP('',(#16056,#16057,#16058,#16066)); +#16056 = ORIENTED_EDGE('',*,*,#15744,.T.); +#16057 = ORIENTED_EDGE('',*,*,#15957,.T.); +#16058 = ORIENTED_EDGE('',*,*,#16059,.F.); +#16059 = EDGE_CURVE('',#16060,#15950,#16062,.T.); +#16060 = VERTEX_POINT('',#16061); +#16061 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16062 = LINE('',#16063,#16064); +#16063 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16064 = VECTOR('',#16065,1.); +#16065 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16066 = ORIENTED_EDGE('',*,*,#16067,.F.); +#16067 = EDGE_CURVE('',#15737,#16060,#16068,.T.); +#16068 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16069,#16070),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16069 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#16070 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16071 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16072,#16073) + ,(#16074,#16075 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#16072 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#16073 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16074 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#16075 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#16076 = ADVANCED_FACE('',(#16077),#16094,.F.); +#16077 = FACE_BOUND('',#16078,.F.); +#16078 = EDGE_LOOP('',(#16079,#16080,#16087,#16093)); +#16079 = ORIENTED_EDGE('',*,*,#15728,.T.); +#16080 = ORIENTED_EDGE('',*,*,#16081,.T.); +#16081 = EDGE_CURVE('',#15729,#16082,#16084,.T.); +#16082 = VERTEX_POINT('',#16083); +#16083 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16084 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16085,#16086),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16085 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#16086 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16087 = ORIENTED_EDGE('',*,*,#16088,.F.); +#16088 = EDGE_CURVE('',#15972,#16082,#16089,.T.); +#16089 = LINE('',#16090,#16091); +#16090 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16091 = VECTOR('',#16092,1.); +#16092 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16093 = ORIENTED_EDGE('',*,*,#15971,.F.); +#16094 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16095,#16096) + ,(#16097,#16098 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#16095 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#16096 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16097 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#16098 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16099 = ADVANCED_FACE('',(#16100),#16111,.F.); +#16100 = FACE_BOUND('',#16101,.F.); +#16101 = EDGE_LOOP('',(#16102,#16103,#16104,#16110)); +#16102 = ORIENTED_EDGE('',*,*,#15736,.T.); +#16103 = ORIENTED_EDGE('',*,*,#16067,.T.); +#16104 = ORIENTED_EDGE('',*,*,#16105,.F.); +#16105 = EDGE_CURVE('',#16082,#16060,#16106,.T.); +#16106 = LINE('',#16107,#16108); +#16107 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16108 = VECTOR('',#16109,1.); +#16109 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16110 = ORIENTED_EDGE('',*,*,#16081,.F.); +#16111 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16112,#16113) + ,(#16114,#16115 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#16112 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#16113 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16114 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#16115 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16116 = ADVANCED_FACE('',(#16117),#16142,.T.); +#16117 = FACE_BOUND('',#16118,.T.); +#16118 = EDGE_LOOP('',(#16119,#16129,#16135,#16136)); +#16119 = ORIENTED_EDGE('',*,*,#16120,.F.); +#16120 = EDGE_CURVE('',#16121,#16123,#16125,.T.); +#16121 = VERTEX_POINT('',#16122); +#16122 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16123 = VERTEX_POINT('',#16124); +#16124 = CARTESIAN_POINT('',(1.145,-1.5,0.)); +#16125 = LINE('',#16126,#16127); +#16126 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16127 = VECTOR('',#16128,1.); +#16128 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16129 = ORIENTED_EDGE('',*,*,#16130,.T.); +#16130 = EDGE_CURVE('',#16121,#15769,#16131,.T.); +#16131 = LINE('',#16132,#16133); +#16132 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16133 = VECTOR('',#16134,1.); +#16134 = DIRECTION('',(0.,0.,1.)); +#16135 = ORIENTED_EDGE('',*,*,#15768,.T.); +#16136 = ORIENTED_EDGE('',*,*,#16137,.F.); +#16137 = EDGE_CURVE('',#16123,#15771,#16138,.T.); +#16138 = LINE('',#16139,#16140); +#16139 = CARTESIAN_POINT('',(1.145,-1.5,0.)); +#16140 = VECTOR('',#16141,1.); +#16141 = DIRECTION('',(0.,0.,1.)); +#16142 = PLANE('',#16143); +#16143 = AXIS2_PLACEMENT_3D('',#16144,#16145,#16146); +#16144 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16145 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16146 = DIRECTION('',(0.,-0.,1.)); +#16147 = ADVANCED_FACE('',(#16148),#16166,.T.); +#16148 = FACE_BOUND('',#16149,.T.); +#16149 = EDGE_LOOP('',(#16150,#16158,#16164,#16165)); +#16150 = ORIENTED_EDGE('',*,*,#16151,.F.); +#16151 = EDGE_CURVE('',#16152,#15787,#16154,.T.); +#16152 = VERTEX_POINT('',#16153); +#16153 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16154 = LINE('',#16155,#16156); +#16155 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16156 = VECTOR('',#16157,1.); +#16157 = DIRECTION('',(0.,0.,1.)); +#16158 = ORIENTED_EDGE('',*,*,#16159,.T.); +#16159 = EDGE_CURVE('',#16152,#16123,#16160,.T.); +#16160 = LINE('',#16161,#16162); +#16161 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16162 = VECTOR('',#16163,1.); +#16163 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16164 = ORIENTED_EDGE('',*,*,#16137,.T.); +#16165 = ORIENTED_EDGE('',*,*,#15794,.F.); +#16166 = PLANE('',#16167); +#16167 = AXIS2_PLACEMENT_3D('',#16168,#16169,#16170); +#16168 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16169 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16170 = DIRECTION('',(0.,0.,1.)); +#16171 = ADVANCED_FACE('',(#16172),#16190,.F.); +#16172 = FACE_BOUND('',#16173,.F.); +#16173 = EDGE_LOOP('',(#16174,#16182,#16188,#16189)); +#16174 = ORIENTED_EDGE('',*,*,#16175,.F.); +#16175 = EDGE_CURVE('',#16176,#16152,#16178,.T.); +#16176 = VERTEX_POINT('',#16177); +#16177 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16178 = LINE('',#16179,#16180); +#16179 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16180 = VECTOR('',#16181,1.); +#16181 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16182 = ORIENTED_EDGE('',*,*,#16183,.T.); +#16183 = EDGE_CURVE('',#16176,#15779,#16184,.T.); +#16184 = LINE('',#16185,#16186); +#16185 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16186 = VECTOR('',#16187,1.); +#16187 = DIRECTION('',(0.,0.,1.)); +#16188 = ORIENTED_EDGE('',*,*,#15786,.T.); +#16189 = ORIENTED_EDGE('',*,*,#16151,.F.); +#16190 = PLANE('',#16191); +#16191 = AXIS2_PLACEMENT_3D('',#16192,#16193,#16194); +#16192 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16193 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16194 = DIRECTION('',(0.,-0.,1.)); +#16195 = ADVANCED_FACE('',(#16196),#16207,.F.); +#16196 = FACE_BOUND('',#16197,.F.); +#16197 = EDGE_LOOP('',(#16198,#16199,#16205,#16206)); +#16198 = ORIENTED_EDGE('',*,*,#16183,.F.); +#16199 = ORIENTED_EDGE('',*,*,#16200,.T.); +#16200 = EDGE_CURVE('',#16176,#16121,#16201,.T.); +#16201 = LINE('',#16202,#16203); +#16202 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16203 = VECTOR('',#16204,1.); +#16204 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16205 = ORIENTED_EDGE('',*,*,#16130,.T.); +#16206 = ORIENTED_EDGE('',*,*,#15778,.F.); +#16207 = PLANE('',#16208); +#16208 = AXIS2_PLACEMENT_3D('',#16209,#16210,#16211); +#16209 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16210 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16211 = DIRECTION('',(0.,0.,1.)); +#16212 = ADVANCED_FACE('',(#16213),#16230,.F.); +#16213 = FACE_BOUND('',#16214,.F.); +#16214 = EDGE_LOOP('',(#16215,#16216,#16223,#16229)); +#16215 = ORIENTED_EDGE('',*,*,#15816,.T.); +#16216 = ORIENTED_EDGE('',*,*,#16217,.T.); +#16217 = EDGE_CURVE('',#15810,#16218,#16220,.T.); +#16218 = VERTEX_POINT('',#16219); +#16219 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16220 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16221,#16222),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16221 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16222 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16223 = ORIENTED_EDGE('',*,*,#16224,.F.); +#16224 = EDGE_CURVE('',#15833,#16218,#16225,.T.); +#16225 = LINE('',#16226,#16227); +#16226 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#16227 = VECTOR('',#16228,1.); +#16228 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16229 = ORIENTED_EDGE('',*,*,#15832,.F.); +#16230 = PLANE('',#16231); +#16231 = AXIS2_PLACEMENT_3D('',#16232,#16233,#16234); +#16232 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#16233 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16234 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16235 = ADVANCED_FACE('',(#16236),#16318,.F.); +#16236 = FACE_BOUND('',#16237,.F.); +#16237 = EDGE_LOOP('',(#16238,#16246,#16247,#16248,#16256,#16264,#16272, + #16280,#16288,#16296,#16304,#16312)); +#16238 = ORIENTED_EDGE('',*,*,#16239,.T.); +#16239 = EDGE_CURVE('',#16240,#15840,#16242,.T.); +#16240 = VERTEX_POINT('',#16241); +#16241 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16242 = LINE('',#16243,#16244); +#16243 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16244 = VECTOR('',#16245,1.); +#16245 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16246 = ORIENTED_EDGE('',*,*,#15839,.T.); +#16247 = ORIENTED_EDGE('',*,*,#16224,.T.); +#16248 = ORIENTED_EDGE('',*,*,#16249,.T.); +#16249 = EDGE_CURVE('',#16218,#16250,#16252,.T.); +#16250 = VERTEX_POINT('',#16251); +#16251 = CARTESIAN_POINT('',(1.95,2.11,0.905)); +#16252 = LINE('',#16253,#16254); +#16253 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16254 = VECTOR('',#16255,1.); +#16255 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16256 = ORIENTED_EDGE('',*,*,#16257,.T.); +#16257 = EDGE_CURVE('',#16250,#16258,#16260,.T.); +#16258 = VERTEX_POINT('',#16259); +#16259 = CARTESIAN_POINT('',(1.9495,2.11,0.905)); +#16260 = LINE('',#16261,#16262); +#16261 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#16262 = VECTOR('',#16263,1.); +#16263 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16264 = ORIENTED_EDGE('',*,*,#16265,.F.); +#16265 = EDGE_CURVE('',#16266,#16258,#16268,.T.); +#16266 = VERTEX_POINT('',#16267); +#16267 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#16268 = LINE('',#16269,#16270); +#16269 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#16270 = VECTOR('',#16271,1.); +#16271 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16272 = ORIENTED_EDGE('',*,*,#16273,.F.); +#16273 = EDGE_CURVE('',#16274,#16266,#16276,.T.); +#16274 = VERTEX_POINT('',#16275); +#16275 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#16276 = LINE('',#16277,#16278); +#16277 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#16278 = VECTOR('',#16279,1.); +#16279 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16280 = ORIENTED_EDGE('',*,*,#16281,.F.); +#16281 = EDGE_CURVE('',#16282,#16274,#16284,.T.); +#16282 = VERTEX_POINT('',#16283); +#16283 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#16284 = LINE('',#16285,#16286); +#16285 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#16286 = VECTOR('',#16287,1.); +#16287 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16288 = ORIENTED_EDGE('',*,*,#16289,.F.); +#16289 = EDGE_CURVE('',#16290,#16282,#16292,.T.); +#16290 = VERTEX_POINT('',#16291); +#16291 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#16292 = LINE('',#16293,#16294); +#16293 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#16294 = VECTOR('',#16295,1.); +#16295 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16296 = ORIENTED_EDGE('',*,*,#16297,.F.); +#16297 = EDGE_CURVE('',#16298,#16290,#16300,.T.); +#16298 = VERTEX_POINT('',#16299); +#16299 = CARTESIAN_POINT('',(-1.9495,2.11,0.905)); +#16300 = LINE('',#16301,#16302); +#16301 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16302 = VECTOR('',#16303,1.); +#16303 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16304 = ORIENTED_EDGE('',*,*,#16305,.F.); +#16305 = EDGE_CURVE('',#16306,#16298,#16308,.T.); +#16306 = VERTEX_POINT('',#16307); +#16307 = CARTESIAN_POINT('',(-1.95,2.11,0.905)); +#16308 = LINE('',#16309,#16310); +#16309 = CARTESIAN_POINT('',(-2.25,2.11,0.905)); +#16310 = VECTOR('',#16311,1.); +#16311 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16312 = ORIENTED_EDGE('',*,*,#16313,.T.); +#16313 = EDGE_CURVE('',#16306,#16240,#16314,.T.); +#16314 = LINE('',#16315,#16316); +#16315 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16316 = VECTOR('',#16317,1.); +#16317 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16318 = PLANE('',#16319); +#16319 = AXIS2_PLACEMENT_3D('',#16320,#16321,#16322); +#16320 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#16321 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#16322 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#16323 = ADVANCED_FACE('',(#16324),#16334,.F.); +#16324 = FACE_BOUND('',#16325,.F.); +#16325 = EDGE_LOOP('',(#16326,#16327,#16328,#16329)); +#16326 = ORIENTED_EDGE('',*,*,#15862,.T.); +#16327 = ORIENTED_EDGE('',*,*,#15847,.T.); +#16328 = ORIENTED_EDGE('',*,*,#16239,.F.); +#16329 = ORIENTED_EDGE('',*,*,#16330,.F.); +#16330 = EDGE_CURVE('',#15863,#16240,#16331,.T.); +#16331 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16332,#16333),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16332 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#16333 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16334 = PLANE('',#16335); +#16335 = AXIS2_PLACEMENT_3D('',#16336,#16337,#16338); +#16336 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16337 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16338 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16339 = ADVANCED_FACE('',(#16340),#16364,.F.); +#16340 = FACE_BOUND('',#16341,.F.); +#16341 = EDGE_LOOP('',(#16342,#16349,#16350,#16358)); +#16342 = ORIENTED_EDGE('',*,*,#16343,.F.); +#16343 = EDGE_CURVE('',#15950,#16344,#16346,.T.); +#16344 = VERTEX_POINT('',#16345); +#16345 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16346 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16347,#16348),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16347 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#16348 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16349 = ORIENTED_EDGE('',*,*,#15949,.T.); +#16350 = ORIENTED_EDGE('',*,*,#16351,.T.); +#16351 = EDGE_CURVE('',#15942,#16352,#16354,.T.); +#16352 = VERTEX_POINT('',#16353); +#16353 = CARTESIAN_POINT('',(-1.95,-2.11,0.905)); +#16354 = LINE('',#16355,#16356); +#16355 = CARTESIAN_POINT('',(-1.95,-2.11,0.679881042197)); +#16356 = VECTOR('',#16357,1.); +#16357 = DIRECTION('',(0.,0.,1.)); +#16358 = ORIENTED_EDGE('',*,*,#16359,.F.); +#16359 = EDGE_CURVE('',#16344,#16352,#16360,.T.); +#16360 = LINE('',#16361,#16362); +#16361 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16362 = VECTOR('',#16363,1.); +#16363 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16364 = PLANE('',#16365); +#16365 = AXIS2_PLACEMENT_3D('',#16366,#16367,#16368); +#16366 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16367 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16368 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16369 = ADVANCED_FACE('',(#16370),#16395,.F.); +#16370 = FACE_BOUND('',#16371,.F.); +#16371 = EDGE_LOOP('',(#16372,#16380,#16381,#16389)); +#16372 = ORIENTED_EDGE('',*,*,#16373,.F.); +#16373 = EDGE_CURVE('',#15942,#16374,#16376,.T.); +#16374 = VERTEX_POINT('',#16375); +#16375 = CARTESIAN_POINT('',(-2.25,-2.11,0.695)); +#16376 = LINE('',#16377,#16378); +#16377 = CARTESIAN_POINT('',(-1.949,-2.11,0.695)); +#16378 = VECTOR('',#16379,1.); +#16379 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16380 = ORIENTED_EDGE('',*,*,#15941,.T.); +#16381 = ORIENTED_EDGE('',*,*,#16382,.T.); +#16382 = EDGE_CURVE('',#15934,#16383,#16385,.T.); +#16383 = VERTEX_POINT('',#16384); +#16384 = CARTESIAN_POINT('',(-2.25,-1.7,0.695)); +#16385 = LINE('',#16386,#16387); +#16386 = CARTESIAN_POINT('',(-1.949,-1.7,0.695)); +#16387 = VECTOR('',#16388,1.); +#16388 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16389 = ORIENTED_EDGE('',*,*,#16390,.F.); +#16390 = EDGE_CURVE('',#16374,#16383,#16391,.T.); +#16391 = LINE('',#16392,#16393); +#16392 = CARTESIAN_POINT('',(-2.25,-2.11,0.695)); +#16393 = VECTOR('',#16394,1.); +#16394 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16395 = PLANE('',#16396); +#16396 = AXIS2_PLACEMENT_3D('',#16397,#16398,#16399); +#16397 = CARTESIAN_POINT('',(-1.949,-2.11,0.695)); +#16398 = DIRECTION('',(0.,0.,1.)); +#16399 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16400 = ADVANCED_FACE('',(#16401),#16426,.F.); +#16401 = FACE_BOUND('',#16402,.F.); +#16402 = EDGE_LOOP('',(#16403,#16411,#16412,#16420)); +#16403 = ORIENTED_EDGE('',*,*,#16404,.F.); +#16404 = EDGE_CURVE('',#15934,#16405,#16407,.T.); +#16405 = VERTEX_POINT('',#16406); +#16406 = CARTESIAN_POINT('',(-1.95,-1.7,0.905)); +#16407 = LINE('',#16408,#16409); +#16408 = CARTESIAN_POINT('',(-1.95,-1.7,0.679881042197)); +#16409 = VECTOR('',#16410,1.); +#16410 = DIRECTION('',(0.,0.,1.)); +#16411 = ORIENTED_EDGE('',*,*,#15933,.T.); +#16412 = ORIENTED_EDGE('',*,*,#16413,.T.); +#16413 = EDGE_CURVE('',#15926,#16414,#16416,.T.); +#16414 = VERTEX_POINT('',#16415); +#16415 = CARTESIAN_POINT('',(-1.95,-0.84,0.905)); +#16416 = LINE('',#16417,#16418); +#16417 = CARTESIAN_POINT('',(-1.95,-0.84,0.679881042197)); +#16418 = VECTOR('',#16419,1.); +#16419 = DIRECTION('',(0.,0.,1.)); +#16420 = ORIENTED_EDGE('',*,*,#16421,.F.); +#16421 = EDGE_CURVE('',#16405,#16414,#16422,.T.); +#16422 = LINE('',#16423,#16424); +#16423 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16424 = VECTOR('',#16425,1.); +#16425 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16426 = PLANE('',#16427); +#16427 = AXIS2_PLACEMENT_3D('',#16428,#16429,#16430); +#16428 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16429 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16430 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16431 = ADVANCED_FACE('',(#16432),#16457,.F.); +#16432 = FACE_BOUND('',#16433,.F.); +#16433 = EDGE_LOOP('',(#16434,#16442,#16443,#16451)); +#16434 = ORIENTED_EDGE('',*,*,#16435,.F.); +#16435 = EDGE_CURVE('',#15926,#16436,#16438,.T.); +#16436 = VERTEX_POINT('',#16437); +#16437 = CARTESIAN_POINT('',(-2.25,-0.84,0.695)); +#16438 = LINE('',#16439,#16440); +#16439 = CARTESIAN_POINT('',(-1.949,-0.84,0.695)); +#16440 = VECTOR('',#16441,1.); +#16441 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16442 = ORIENTED_EDGE('',*,*,#15925,.T.); +#16443 = ORIENTED_EDGE('',*,*,#16444,.T.); +#16444 = EDGE_CURVE('',#15918,#16445,#16447,.T.); +#16445 = VERTEX_POINT('',#16446); +#16446 = CARTESIAN_POINT('',(-2.25,-0.43,0.695)); +#16447 = LINE('',#16448,#16449); +#16448 = CARTESIAN_POINT('',(-1.949,-0.43,0.695)); +#16449 = VECTOR('',#16450,1.); +#16450 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16451 = ORIENTED_EDGE('',*,*,#16452,.F.); +#16452 = EDGE_CURVE('',#16436,#16445,#16453,.T.); +#16453 = LINE('',#16454,#16455); +#16454 = CARTESIAN_POINT('',(-2.25,-0.84,0.695)); +#16455 = VECTOR('',#16456,1.); +#16456 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16457 = PLANE('',#16458); +#16458 = AXIS2_PLACEMENT_3D('',#16459,#16460,#16461); +#16459 = CARTESIAN_POINT('',(-1.949,-0.84,0.695)); +#16460 = DIRECTION('',(0.,0.,1.)); +#16461 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16462 = ADVANCED_FACE('',(#16463),#16488,.F.); +#16463 = FACE_BOUND('',#16464,.F.); +#16464 = EDGE_LOOP('',(#16465,#16473,#16474,#16482)); +#16465 = ORIENTED_EDGE('',*,*,#16466,.F.); +#16466 = EDGE_CURVE('',#15918,#16467,#16469,.T.); +#16467 = VERTEX_POINT('',#16468); +#16468 = CARTESIAN_POINT('',(-1.95,-0.43,0.905)); +#16469 = LINE('',#16470,#16471); +#16470 = CARTESIAN_POINT('',(-1.95,-0.43,0.679881042197)); +#16471 = VECTOR('',#16472,1.); +#16472 = DIRECTION('',(0.,0.,1.)); +#16473 = ORIENTED_EDGE('',*,*,#15917,.T.); +#16474 = ORIENTED_EDGE('',*,*,#16475,.T.); +#16475 = EDGE_CURVE('',#15910,#16476,#16478,.T.); +#16476 = VERTEX_POINT('',#16477); +#16477 = CARTESIAN_POINT('',(-1.95,0.43,0.905)); +#16478 = LINE('',#16479,#16480); +#16479 = CARTESIAN_POINT('',(-1.95,0.43,0.679881042197)); +#16480 = VECTOR('',#16481,1.); +#16481 = DIRECTION('',(0.,0.,1.)); +#16482 = ORIENTED_EDGE('',*,*,#16483,.F.); +#16483 = EDGE_CURVE('',#16467,#16476,#16484,.T.); +#16484 = LINE('',#16485,#16486); +#16485 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16486 = VECTOR('',#16487,1.); +#16487 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16488 = PLANE('',#16489); +#16489 = AXIS2_PLACEMENT_3D('',#16490,#16491,#16492); +#16490 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16491 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16492 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16493 = ADVANCED_FACE('',(#16494),#16519,.F.); +#16494 = FACE_BOUND('',#16495,.F.); +#16495 = EDGE_LOOP('',(#16496,#16504,#16505,#16513)); +#16496 = ORIENTED_EDGE('',*,*,#16497,.F.); +#16497 = EDGE_CURVE('',#15910,#16498,#16500,.T.); +#16498 = VERTEX_POINT('',#16499); +#16499 = CARTESIAN_POINT('',(-2.25,0.43,0.695)); +#16500 = LINE('',#16501,#16502); +#16501 = CARTESIAN_POINT('',(-1.949,0.43,0.695)); +#16502 = VECTOR('',#16503,1.); +#16503 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16504 = ORIENTED_EDGE('',*,*,#15909,.T.); +#16505 = ORIENTED_EDGE('',*,*,#16506,.T.); +#16506 = EDGE_CURVE('',#15902,#16507,#16509,.T.); +#16507 = VERTEX_POINT('',#16508); +#16508 = CARTESIAN_POINT('',(-2.25,0.84,0.695)); +#16509 = LINE('',#16510,#16511); +#16510 = CARTESIAN_POINT('',(-1.949,0.84,0.695)); +#16511 = VECTOR('',#16512,1.); +#16512 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16513 = ORIENTED_EDGE('',*,*,#16514,.F.); +#16514 = EDGE_CURVE('',#16498,#16507,#16515,.T.); +#16515 = LINE('',#16516,#16517); +#16516 = CARTESIAN_POINT('',(-2.25,0.43,0.695)); +#16517 = VECTOR('',#16518,1.); +#16518 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16519 = PLANE('',#16520); +#16520 = AXIS2_PLACEMENT_3D('',#16521,#16522,#16523); +#16521 = CARTESIAN_POINT('',(-1.949,0.43,0.695)); +#16522 = DIRECTION('',(0.,0.,1.)); +#16523 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16524 = ADVANCED_FACE('',(#16525),#16550,.F.); +#16525 = FACE_BOUND('',#16526,.F.); +#16526 = EDGE_LOOP('',(#16527,#16535,#16536,#16544)); +#16527 = ORIENTED_EDGE('',*,*,#16528,.F.); +#16528 = EDGE_CURVE('',#15902,#16529,#16531,.T.); +#16529 = VERTEX_POINT('',#16530); +#16530 = CARTESIAN_POINT('',(-1.95,0.84,0.905)); +#16531 = LINE('',#16532,#16533); +#16532 = CARTESIAN_POINT('',(-1.95,0.84,0.679881042197)); +#16533 = VECTOR('',#16534,1.); +#16534 = DIRECTION('',(0.,0.,1.)); +#16535 = ORIENTED_EDGE('',*,*,#15901,.T.); +#16536 = ORIENTED_EDGE('',*,*,#16537,.T.); +#16537 = EDGE_CURVE('',#15894,#16538,#16540,.T.); +#16538 = VERTEX_POINT('',#16539); +#16539 = CARTESIAN_POINT('',(-1.95,1.7,0.905)); +#16540 = LINE('',#16541,#16542); +#16541 = CARTESIAN_POINT('',(-1.95,1.7,0.679881042197)); +#16542 = VECTOR('',#16543,1.); +#16543 = DIRECTION('',(0.,0.,1.)); +#16544 = ORIENTED_EDGE('',*,*,#16545,.F.); +#16545 = EDGE_CURVE('',#16529,#16538,#16546,.T.); +#16546 = LINE('',#16547,#16548); +#16547 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16548 = VECTOR('',#16549,1.); +#16549 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16550 = PLANE('',#16551); +#16551 = AXIS2_PLACEMENT_3D('',#16552,#16553,#16554); +#16552 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16553 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16554 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16555 = ADVANCED_FACE('',(#16556),#16581,.F.); +#16556 = FACE_BOUND('',#16557,.F.); +#16557 = EDGE_LOOP('',(#16558,#16566,#16567,#16575)); +#16558 = ORIENTED_EDGE('',*,*,#16559,.F.); +#16559 = EDGE_CURVE('',#15894,#16560,#16562,.T.); +#16560 = VERTEX_POINT('',#16561); +#16561 = CARTESIAN_POINT('',(-2.25,1.7,0.695)); +#16562 = LINE('',#16563,#16564); +#16563 = CARTESIAN_POINT('',(-1.949,1.7,0.695)); +#16564 = VECTOR('',#16565,1.); +#16565 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16566 = ORIENTED_EDGE('',*,*,#15893,.T.); +#16567 = ORIENTED_EDGE('',*,*,#16568,.T.); +#16568 = EDGE_CURVE('',#15886,#16569,#16571,.T.); +#16569 = VERTEX_POINT('',#16570); +#16570 = CARTESIAN_POINT('',(-2.25,2.11,0.695)); +#16571 = LINE('',#16572,#16573); +#16572 = CARTESIAN_POINT('',(-1.949,2.11,0.695)); +#16573 = VECTOR('',#16574,1.); +#16574 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16575 = ORIENTED_EDGE('',*,*,#16576,.F.); +#16576 = EDGE_CURVE('',#16560,#16569,#16577,.T.); +#16577 = LINE('',#16578,#16579); +#16578 = CARTESIAN_POINT('',(-2.25,1.7,0.695)); +#16579 = VECTOR('',#16580,1.); +#16580 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16581 = PLANE('',#16582); +#16582 = AXIS2_PLACEMENT_3D('',#16583,#16584,#16585); +#16583 = CARTESIAN_POINT('',(-1.949,1.7,0.695)); +#16584 = DIRECTION('',(0.,0.,1.)); +#16585 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16586 = ADVANCED_FACE('',(#16587),#16598,.F.); +#16587 = FACE_BOUND('',#16588,.F.); +#16588 = EDGE_LOOP('',(#16589,#16595,#16596,#16597)); +#16589 = ORIENTED_EDGE('',*,*,#16590,.F.); +#16590 = EDGE_CURVE('',#15886,#16306,#16591,.T.); +#16591 = LINE('',#16592,#16593); +#16592 = CARTESIAN_POINT('',(-1.95,2.11,0.679881042197)); +#16593 = VECTOR('',#16594,1.); +#16594 = DIRECTION('',(0.,0.,1.)); +#16595 = ORIENTED_EDGE('',*,*,#15885,.T.); +#16596 = ORIENTED_EDGE('',*,*,#16330,.T.); +#16597 = ORIENTED_EDGE('',*,*,#16313,.F.); +#16598 = PLANE('',#16599); +#16599 = AXIS2_PLACEMENT_3D('',#16600,#16601,#16602); +#16600 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16601 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16602 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16603 = ADVANCED_FACE('',(#16604),#16615,.F.); +#16604 = FACE_BOUND('',#16605,.F.); +#16605 = EDGE_LOOP('',(#16606,#16607,#16608,#16614)); +#16606 = ORIENTED_EDGE('',*,*,#16217,.F.); +#16607 = ORIENTED_EDGE('',*,*,#16042,.T.); +#16608 = ORIENTED_EDGE('',*,*,#16609,.T.); +#16609 = EDGE_CURVE('',#16035,#16250,#16610,.T.); +#16610 = LINE('',#16611,#16612); +#16611 = CARTESIAN_POINT('',(1.95,2.11,0.679881042197)); +#16612 = VECTOR('',#16613,1.); +#16613 = DIRECTION('',(0.,0.,1.)); +#16614 = ORIENTED_EDGE('',*,*,#16249,.F.); +#16615 = PLANE('',#16616); +#16616 = AXIS2_PLACEMENT_3D('',#16617,#16618,#16619); +#16617 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16618 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16619 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16620 = ADVANCED_FACE('',(#16621),#16646,.F.); +#16621 = FACE_BOUND('',#16622,.F.); +#16622 = EDGE_LOOP('',(#16623,#16631,#16632,#16640)); +#16623 = ORIENTED_EDGE('',*,*,#16624,.F.); +#16624 = EDGE_CURVE('',#16035,#16625,#16627,.T.); +#16625 = VERTEX_POINT('',#16626); +#16626 = CARTESIAN_POINT('',(2.25,2.11,0.695)); +#16627 = LINE('',#16628,#16629); +#16628 = CARTESIAN_POINT('',(1.949,2.11,0.695)); +#16629 = VECTOR('',#16630,1.); +#16630 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16631 = ORIENTED_EDGE('',*,*,#16034,.T.); +#16632 = ORIENTED_EDGE('',*,*,#16633,.T.); +#16633 = EDGE_CURVE('',#16027,#16634,#16636,.T.); +#16634 = VERTEX_POINT('',#16635); +#16635 = CARTESIAN_POINT('',(2.25,1.7,0.695)); +#16636 = LINE('',#16637,#16638); +#16637 = CARTESIAN_POINT('',(1.949,1.7,0.695)); +#16638 = VECTOR('',#16639,1.); +#16639 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16640 = ORIENTED_EDGE('',*,*,#16641,.F.); +#16641 = EDGE_CURVE('',#16625,#16634,#16642,.T.); +#16642 = LINE('',#16643,#16644); +#16643 = CARTESIAN_POINT('',(2.25,2.11,0.695)); +#16644 = VECTOR('',#16645,1.); +#16645 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16646 = PLANE('',#16647); +#16647 = AXIS2_PLACEMENT_3D('',#16648,#16649,#16650); +#16648 = CARTESIAN_POINT('',(1.949,2.11,0.695)); +#16649 = DIRECTION('',(0.,0.,1.)); +#16650 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16651 = ADVANCED_FACE('',(#16652),#16677,.F.); +#16652 = FACE_BOUND('',#16653,.F.); +#16653 = EDGE_LOOP('',(#16654,#16662,#16663,#16671)); +#16654 = ORIENTED_EDGE('',*,*,#16655,.F.); +#16655 = EDGE_CURVE('',#16027,#16656,#16658,.T.); +#16656 = VERTEX_POINT('',#16657); +#16657 = CARTESIAN_POINT('',(1.95,1.7,0.905)); +#16658 = LINE('',#16659,#16660); +#16659 = CARTESIAN_POINT('',(1.95,1.7,0.679881042197)); +#16660 = VECTOR('',#16661,1.); +#16661 = DIRECTION('',(0.,0.,1.)); +#16662 = ORIENTED_EDGE('',*,*,#16026,.T.); +#16663 = ORIENTED_EDGE('',*,*,#16664,.T.); +#16664 = EDGE_CURVE('',#16019,#16665,#16667,.T.); +#16665 = VERTEX_POINT('',#16666); +#16666 = CARTESIAN_POINT('',(1.95,0.84,0.905)); +#16667 = LINE('',#16668,#16669); +#16668 = CARTESIAN_POINT('',(1.95,0.84,0.679881042197)); +#16669 = VECTOR('',#16670,1.); +#16670 = DIRECTION('',(0.,0.,1.)); +#16671 = ORIENTED_EDGE('',*,*,#16672,.F.); +#16672 = EDGE_CURVE('',#16656,#16665,#16673,.T.); +#16673 = LINE('',#16674,#16675); +#16674 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16675 = VECTOR('',#16676,1.); +#16676 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16677 = PLANE('',#16678); +#16678 = AXIS2_PLACEMENT_3D('',#16679,#16680,#16681); +#16679 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16680 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16681 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16682 = ADVANCED_FACE('',(#16683),#16708,.F.); +#16683 = FACE_BOUND('',#16684,.F.); +#16684 = EDGE_LOOP('',(#16685,#16693,#16694,#16702)); +#16685 = ORIENTED_EDGE('',*,*,#16686,.F.); +#16686 = EDGE_CURVE('',#16019,#16687,#16689,.T.); +#16687 = VERTEX_POINT('',#16688); +#16688 = CARTESIAN_POINT('',(2.25,0.84,0.695)); +#16689 = LINE('',#16690,#16691); +#16690 = CARTESIAN_POINT('',(1.949,0.84,0.695)); +#16691 = VECTOR('',#16692,1.); +#16692 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16693 = ORIENTED_EDGE('',*,*,#16018,.T.); +#16694 = ORIENTED_EDGE('',*,*,#16695,.T.); +#16695 = EDGE_CURVE('',#16011,#16696,#16698,.T.); +#16696 = VERTEX_POINT('',#16697); +#16697 = CARTESIAN_POINT('',(2.25,0.43,0.695)); +#16698 = LINE('',#16699,#16700); +#16699 = CARTESIAN_POINT('',(1.949,0.43,0.695)); +#16700 = VECTOR('',#16701,1.); +#16701 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16702 = ORIENTED_EDGE('',*,*,#16703,.F.); +#16703 = EDGE_CURVE('',#16687,#16696,#16704,.T.); +#16704 = LINE('',#16705,#16706); +#16705 = CARTESIAN_POINT('',(2.25,0.84,0.695)); +#16706 = VECTOR('',#16707,1.); +#16707 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16708 = PLANE('',#16709); +#16709 = AXIS2_PLACEMENT_3D('',#16710,#16711,#16712); +#16710 = CARTESIAN_POINT('',(1.949,0.84,0.695)); +#16711 = DIRECTION('',(0.,0.,1.)); +#16712 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16713 = ADVANCED_FACE('',(#16714),#16739,.F.); +#16714 = FACE_BOUND('',#16715,.F.); +#16715 = EDGE_LOOP('',(#16716,#16724,#16725,#16733)); +#16716 = ORIENTED_EDGE('',*,*,#16717,.F.); +#16717 = EDGE_CURVE('',#16011,#16718,#16720,.T.); +#16718 = VERTEX_POINT('',#16719); +#16719 = CARTESIAN_POINT('',(1.95,0.43,0.905)); +#16720 = LINE('',#16721,#16722); +#16721 = CARTESIAN_POINT('',(1.95,0.43,0.679881042197)); +#16722 = VECTOR('',#16723,1.); +#16723 = DIRECTION('',(0.,0.,1.)); +#16724 = ORIENTED_EDGE('',*,*,#16010,.T.); +#16725 = ORIENTED_EDGE('',*,*,#16726,.T.); +#16726 = EDGE_CURVE('',#16003,#16727,#16729,.T.); +#16727 = VERTEX_POINT('',#16728); +#16728 = CARTESIAN_POINT('',(1.95,-0.43,0.905)); +#16729 = LINE('',#16730,#16731); +#16730 = CARTESIAN_POINT('',(1.95,-0.43,0.679881042197)); +#16731 = VECTOR('',#16732,1.); +#16732 = DIRECTION('',(0.,0.,1.)); +#16733 = ORIENTED_EDGE('',*,*,#16734,.F.); +#16734 = EDGE_CURVE('',#16718,#16727,#16735,.T.); +#16735 = LINE('',#16736,#16737); +#16736 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16737 = VECTOR('',#16738,1.); +#16738 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16739 = PLANE('',#16740); +#16740 = AXIS2_PLACEMENT_3D('',#16741,#16742,#16743); +#16741 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16742 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16743 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16744 = ADVANCED_FACE('',(#16745),#16770,.F.); +#16745 = FACE_BOUND('',#16746,.F.); +#16746 = EDGE_LOOP('',(#16747,#16755,#16756,#16764)); +#16747 = ORIENTED_EDGE('',*,*,#16748,.F.); +#16748 = EDGE_CURVE('',#16003,#16749,#16751,.T.); +#16749 = VERTEX_POINT('',#16750); +#16750 = CARTESIAN_POINT('',(2.25,-0.43,0.695)); +#16751 = LINE('',#16752,#16753); +#16752 = CARTESIAN_POINT('',(1.949,-0.43,0.695)); +#16753 = VECTOR('',#16754,1.); +#16754 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16755 = ORIENTED_EDGE('',*,*,#16002,.T.); +#16756 = ORIENTED_EDGE('',*,*,#16757,.T.); +#16757 = EDGE_CURVE('',#15995,#16758,#16760,.T.); +#16758 = VERTEX_POINT('',#16759); +#16759 = CARTESIAN_POINT('',(2.25,-0.84,0.695)); +#16760 = LINE('',#16761,#16762); +#16761 = CARTESIAN_POINT('',(1.949,-0.84,0.695)); +#16762 = VECTOR('',#16763,1.); +#16763 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16764 = ORIENTED_EDGE('',*,*,#16765,.F.); +#16765 = EDGE_CURVE('',#16749,#16758,#16766,.T.); +#16766 = LINE('',#16767,#16768); +#16767 = CARTESIAN_POINT('',(2.25,-0.43,0.695)); +#16768 = VECTOR('',#16769,1.); +#16769 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16770 = PLANE('',#16771); +#16771 = AXIS2_PLACEMENT_3D('',#16772,#16773,#16774); +#16772 = CARTESIAN_POINT('',(1.949,-0.43,0.695)); +#16773 = DIRECTION('',(0.,0.,1.)); +#16774 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16775 = ADVANCED_FACE('',(#16776),#16801,.F.); +#16776 = FACE_BOUND('',#16777,.F.); +#16777 = EDGE_LOOP('',(#16778,#16786,#16787,#16795)); +#16778 = ORIENTED_EDGE('',*,*,#16779,.F.); +#16779 = EDGE_CURVE('',#15995,#16780,#16782,.T.); +#16780 = VERTEX_POINT('',#16781); +#16781 = CARTESIAN_POINT('',(1.95,-0.84,0.905)); +#16782 = LINE('',#16783,#16784); +#16783 = CARTESIAN_POINT('',(1.95,-0.84,0.679881042197)); +#16784 = VECTOR('',#16785,1.); +#16785 = DIRECTION('',(0.,0.,1.)); +#16786 = ORIENTED_EDGE('',*,*,#15994,.T.); +#16787 = ORIENTED_EDGE('',*,*,#16788,.T.); +#16788 = EDGE_CURVE('',#15987,#16789,#16791,.T.); +#16789 = VERTEX_POINT('',#16790); +#16790 = CARTESIAN_POINT('',(1.95,-1.7,0.905)); +#16791 = LINE('',#16792,#16793); +#16792 = CARTESIAN_POINT('',(1.95,-1.7,0.679881042197)); +#16793 = VECTOR('',#16794,1.); +#16794 = DIRECTION('',(0.,0.,1.)); +#16795 = ORIENTED_EDGE('',*,*,#16796,.F.); +#16796 = EDGE_CURVE('',#16780,#16789,#16797,.T.); +#16797 = LINE('',#16798,#16799); +#16798 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16799 = VECTOR('',#16800,1.); +#16800 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16801 = PLANE('',#16802); +#16802 = AXIS2_PLACEMENT_3D('',#16803,#16804,#16805); +#16803 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16804 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16805 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16806 = ADVANCED_FACE('',(#16807),#16832,.F.); +#16807 = FACE_BOUND('',#16808,.F.); +#16808 = EDGE_LOOP('',(#16809,#16817,#16818,#16826)); +#16809 = ORIENTED_EDGE('',*,*,#16810,.F.); +#16810 = EDGE_CURVE('',#15987,#16811,#16813,.T.); +#16811 = VERTEX_POINT('',#16812); +#16812 = CARTESIAN_POINT('',(2.25,-1.7,0.695)); +#16813 = LINE('',#16814,#16815); +#16814 = CARTESIAN_POINT('',(1.949,-1.7,0.695)); +#16815 = VECTOR('',#16816,1.); +#16816 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16817 = ORIENTED_EDGE('',*,*,#15986,.T.); +#16818 = ORIENTED_EDGE('',*,*,#16819,.T.); +#16819 = EDGE_CURVE('',#15979,#16820,#16822,.T.); +#16820 = VERTEX_POINT('',#16821); +#16821 = CARTESIAN_POINT('',(2.25,-2.11,0.695)); +#16822 = LINE('',#16823,#16824); +#16823 = CARTESIAN_POINT('',(1.949,-2.11,0.695)); +#16824 = VECTOR('',#16825,1.); +#16825 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16826 = ORIENTED_EDGE('',*,*,#16827,.F.); +#16827 = EDGE_CURVE('',#16811,#16820,#16828,.T.); +#16828 = LINE('',#16829,#16830); +#16829 = CARTESIAN_POINT('',(2.25,-1.7,0.695)); +#16830 = VECTOR('',#16831,1.); +#16831 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16832 = PLANE('',#16833); +#16833 = AXIS2_PLACEMENT_3D('',#16834,#16835,#16836); +#16834 = CARTESIAN_POINT('',(1.949,-1.7,0.695)); +#16835 = DIRECTION('',(0.,0.,1.)); +#16836 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16837 = ADVANCED_FACE('',(#16838),#16862,.F.); +#16838 = FACE_BOUND('',#16839,.F.); +#16839 = EDGE_LOOP('',(#16840,#16848,#16849,#16856)); +#16840 = ORIENTED_EDGE('',*,*,#16841,.F.); +#16841 = EDGE_CURVE('',#15979,#16842,#16844,.T.); +#16842 = VERTEX_POINT('',#16843); +#16843 = CARTESIAN_POINT('',(1.95,-2.11,0.905)); +#16844 = LINE('',#16845,#16846); +#16845 = CARTESIAN_POINT('',(1.95,-2.11,0.679881042197)); +#16846 = VECTOR('',#16847,1.); +#16847 = DIRECTION('',(0.,0.,1.)); +#16848 = ORIENTED_EDGE('',*,*,#15978,.T.); +#16849 = ORIENTED_EDGE('',*,*,#16850,.T.); +#16850 = EDGE_CURVE('',#15972,#16851,#16853,.T.); +#16851 = VERTEX_POINT('',#16852); +#16852 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16853 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16854,#16855),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16854 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16855 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16856 = ORIENTED_EDGE('',*,*,#16857,.F.); +#16857 = EDGE_CURVE('',#16842,#16851,#16858,.T.); +#16858 = LINE('',#16859,#16860); +#16859 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16860 = VECTOR('',#16861,1.); +#16861 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16862 = PLANE('',#16863); +#16863 = AXIS2_PLACEMENT_3D('',#16864,#16865,#16866); +#16864 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16865 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16866 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16867 = ADVANCED_FACE('',(#16868),#16885,.F.); +#16868 = FACE_BOUND('',#16869,.F.); +#16869 = EDGE_LOOP('',(#16870,#16871,#16872,#16880)); +#16870 = ORIENTED_EDGE('',*,*,#16059,.T.); +#16871 = ORIENTED_EDGE('',*,*,#16343,.T.); +#16872 = ORIENTED_EDGE('',*,*,#16873,.F.); +#16873 = EDGE_CURVE('',#16874,#16344,#16876,.T.); +#16874 = VERTEX_POINT('',#16875); +#16875 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16876 = LINE('',#16877,#16878); +#16877 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16878 = VECTOR('',#16879,1.); +#16879 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16880 = ORIENTED_EDGE('',*,*,#16881,.F.); +#16881 = EDGE_CURVE('',#16060,#16874,#16882,.T.); +#16882 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16883,#16884),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16883 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16884 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16885 = PLANE('',#16886); +#16886 = AXIS2_PLACEMENT_3D('',#16887,#16888,#16889); +#16887 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16888 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16890 = ADVANCED_FACE('',(#16891),#16908,.F.); +#16891 = FACE_BOUND('',#16892,.F.); +#16892 = EDGE_LOOP('',(#16893,#16894,#16901,#16907)); +#16893 = ORIENTED_EDGE('',*,*,#16088,.T.); +#16894 = ORIENTED_EDGE('',*,*,#16895,.T.); +#16895 = EDGE_CURVE('',#16082,#16896,#16898,.T.); +#16896 = VERTEX_POINT('',#16897); +#16897 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16898 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16899,#16900),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16899 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16900 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16901 = ORIENTED_EDGE('',*,*,#16902,.F.); +#16902 = EDGE_CURVE('',#16851,#16896,#16903,.T.); +#16903 = LINE('',#16904,#16905); +#16904 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16905 = VECTOR('',#16906,1.); +#16906 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16907 = ORIENTED_EDGE('',*,*,#16850,.F.); +#16908 = PLANE('',#16909); +#16909 = AXIS2_PLACEMENT_3D('',#16910,#16911,#16912); +#16910 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16911 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16912 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16913 = ADVANCED_FACE('',(#16914),#16925,.F.); +#16914 = FACE_BOUND('',#16915,.F.); +#16915 = EDGE_LOOP('',(#16916,#16917,#16918,#16924)); +#16916 = ORIENTED_EDGE('',*,*,#16105,.T.); +#16917 = ORIENTED_EDGE('',*,*,#16881,.T.); +#16918 = ORIENTED_EDGE('',*,*,#16919,.F.); +#16919 = EDGE_CURVE('',#16896,#16874,#16920,.T.); +#16920 = LINE('',#16921,#16922); +#16921 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16922 = VECTOR('',#16923,1.); +#16923 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16924 = ORIENTED_EDGE('',*,*,#16895,.F.); +#16925 = PLANE('',#16926); +#16926 = AXIS2_PLACEMENT_3D('',#16927,#16928,#16929); +#16927 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16928 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16929 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16930 = ADVANCED_FACE('',(#16931),#16937,.F.); +#16931 = FACE_BOUND('',#16932,.F.); +#16932 = EDGE_LOOP('',(#16933,#16934,#16935,#16936)); +#16933 = ORIENTED_EDGE('',*,*,#16200,.F.); +#16934 = ORIENTED_EDGE('',*,*,#16175,.T.); +#16935 = ORIENTED_EDGE('',*,*,#16159,.T.); +#16936 = ORIENTED_EDGE('',*,*,#16120,.F.); +#16937 = PLANE('',#16938); +#16938 = AXIS2_PLACEMENT_3D('',#16939,#16940,#16941); +#16939 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16940 = DIRECTION('',(0.,0.,1.)); +#16941 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16942 = ADVANCED_FACE('',(#16943),#16982,.F.); +#16943 = FACE_BOUND('',#16944,.F.); +#16944 = EDGE_LOOP('',(#16945,#16953,#16961,#16967,#16968,#16976)); +#16945 = ORIENTED_EDGE('',*,*,#16946,.F.); +#16946 = EDGE_CURVE('',#16947,#16538,#16949,.T.); +#16947 = VERTEX_POINT('',#16948); +#16948 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16949 = LINE('',#16950,#16951); +#16950 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16951 = VECTOR('',#16952,1.); +#16952 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16953 = ORIENTED_EDGE('',*,*,#16954,.T.); +#16954 = EDGE_CURVE('',#16947,#16955,#16957,.T.); +#16955 = VERTEX_POINT('',#16956); +#16956 = CARTESIAN_POINT('',(-2.25,2.11,0.905)); +#16957 = LINE('',#16958,#16959); +#16958 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16959 = VECTOR('',#16960,1.); +#16960 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16961 = ORIENTED_EDGE('',*,*,#16962,.T.); +#16962 = EDGE_CURVE('',#16955,#16306,#16963,.T.); +#16963 = LINE('',#16964,#16965); +#16964 = CARTESIAN_POINT('',(-2.25,2.11,0.905)); +#16965 = VECTOR('',#16966,1.); +#16966 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16967 = ORIENTED_EDGE('',*,*,#16305,.T.); +#16968 = ORIENTED_EDGE('',*,*,#16969,.F.); +#16969 = EDGE_CURVE('',#16970,#16298,#16972,.T.); +#16970 = VERTEX_POINT('',#16971); +#16971 = CARTESIAN_POINT('',(-1.9495,1.7,0.905)); +#16972 = LINE('',#16973,#16974); +#16973 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16974 = VECTOR('',#16975,1.); +#16975 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16976 = ORIENTED_EDGE('',*,*,#16977,.F.); +#16977 = EDGE_CURVE('',#16538,#16970,#16978,.T.); +#16978 = LINE('',#16979,#16980); +#16979 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16980 = VECTOR('',#16981,1.); +#16981 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16982 = PLANE('',#16983); +#16983 = AXIS2_PLACEMENT_3D('',#16984,#16985,#16986); +#16984 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16985 = DIRECTION('',(0.,0.,-1.)); +#16986 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16987 = ADVANCED_FACE('',(#16988),#17068,.F.); +#16988 = FACE_BOUND('',#16989,.F.); +#16989 = EDGE_LOOP('',(#16990,#17000,#17008,#17016,#17024,#17032,#17040, + #17046,#17047,#17048,#17055,#17063)); +#16990 = ORIENTED_EDGE('',*,*,#16991,.T.); +#16991 = EDGE_CURVE('',#16992,#16994,#16996,.T.); +#16992 = VERTEX_POINT('',#16993); +#16993 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16994 = VERTEX_POINT('',#16995); +#16995 = CARTESIAN_POINT('',(-1.9495,-2.11,0.905)); +#16996 = LINE('',#16997,#16998); +#16997 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16998 = VECTOR('',#16999,1.); +#16999 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17000 = ORIENTED_EDGE('',*,*,#17001,.T.); +#17001 = EDGE_CURVE('',#16994,#17002,#17004,.T.); +#17002 = VERTEX_POINT('',#17003); +#17003 = CARTESIAN_POINT('',(-1.9495,-1.7,0.905)); +#17004 = LINE('',#17005,#17006); +#17005 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17006 = VECTOR('',#17007,1.); +#17007 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17008 = ORIENTED_EDGE('',*,*,#17009,.T.); +#17009 = EDGE_CURVE('',#17002,#17010,#17012,.T.); +#17010 = VERTEX_POINT('',#17011); +#17011 = CARTESIAN_POINT('',(-1.9495,-0.84,0.905)); +#17012 = LINE('',#17013,#17014); +#17013 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17014 = VECTOR('',#17015,1.); +#17015 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17016 = ORIENTED_EDGE('',*,*,#17017,.T.); +#17017 = EDGE_CURVE('',#17010,#17018,#17020,.T.); +#17018 = VERTEX_POINT('',#17019); +#17019 = CARTESIAN_POINT('',(-1.9495,-0.43,0.905)); +#17020 = LINE('',#17021,#17022); +#17021 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17022 = VECTOR('',#17023,1.); +#17023 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17024 = ORIENTED_EDGE('',*,*,#17025,.T.); +#17025 = EDGE_CURVE('',#17018,#17026,#17028,.T.); +#17026 = VERTEX_POINT('',#17027); +#17027 = CARTESIAN_POINT('',(-1.9495,0.43,0.905)); +#17028 = LINE('',#17029,#17030); +#17029 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17030 = VECTOR('',#17031,1.); +#17031 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17032 = ORIENTED_EDGE('',*,*,#17033,.T.); +#17033 = EDGE_CURVE('',#17026,#17034,#17036,.T.); +#17034 = VERTEX_POINT('',#17035); +#17035 = CARTESIAN_POINT('',(-1.9495,0.84,0.905)); +#17036 = LINE('',#17037,#17038); +#17037 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17038 = VECTOR('',#17039,1.); +#17039 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17040 = ORIENTED_EDGE('',*,*,#17041,.T.); +#17041 = EDGE_CURVE('',#17034,#16970,#17042,.T.); +#17042 = LINE('',#17043,#17044); +#17043 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17044 = VECTOR('',#17045,1.); +#17045 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17046 = ORIENTED_EDGE('',*,*,#16969,.T.); +#17047 = ORIENTED_EDGE('',*,*,#16297,.T.); +#17048 = ORIENTED_EDGE('',*,*,#17049,.T.); +#17049 = EDGE_CURVE('',#16290,#17050,#17052,.T.); +#17050 = VERTEX_POINT('',#17051); +#17051 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17052 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17053,#17054),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17053 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#17054 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17055 = ORIENTED_EDGE('',*,*,#17056,.F.); +#17056 = EDGE_CURVE('',#17057,#17050,#17059,.T.); +#17057 = VERTEX_POINT('',#17058); +#17058 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17059 = LINE('',#17060,#17061); +#17060 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17061 = VECTOR('',#17062,1.); +#17062 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17063 = ORIENTED_EDGE('',*,*,#17064,.F.); +#17064 = EDGE_CURVE('',#16992,#17057,#17065,.T.); +#17065 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17066,#17067),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17066 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17067 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17068 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17069,#17070) + ,(#17071,#17072 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#17069 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17070 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17071 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#17072 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17073 = ADVANCED_FACE('',(#17074),#17091,.F.); +#17074 = FACE_BOUND('',#17075,.F.); +#17075 = EDGE_LOOP('',(#17076,#17077,#17084,#17090)); +#17076 = ORIENTED_EDGE('',*,*,#16289,.T.); +#17077 = ORIENTED_EDGE('',*,*,#17078,.T.); +#17078 = EDGE_CURVE('',#16282,#17079,#17081,.T.); +#17079 = VERTEX_POINT('',#17080); +#17080 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17082,#17083),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17082 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#17083 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17084 = ORIENTED_EDGE('',*,*,#17085,.F.); +#17085 = EDGE_CURVE('',#17050,#17079,#17086,.T.); +#17086 = LINE('',#17087,#17088); +#17087 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17088 = VECTOR('',#17089,1.); +#17089 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#17090 = ORIENTED_EDGE('',*,*,#17049,.F.); +#17091 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17092,#17093) + ,(#17094,#17095 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#17092 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#17093 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17094 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#17095 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17096 = ADVANCED_FACE('',(#17097),#17114,.F.); +#17097 = FACE_BOUND('',#17098,.F.); +#17098 = EDGE_LOOP('',(#17099,#17100,#17107,#17113)); +#17099 = ORIENTED_EDGE('',*,*,#16281,.T.); +#17100 = ORIENTED_EDGE('',*,*,#17101,.T.); +#17101 = EDGE_CURVE('',#16274,#17102,#17104,.T.); +#17102 = VERTEX_POINT('',#17103); +#17103 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17104 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17105,#17106),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17105 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#17106 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17107 = ORIENTED_EDGE('',*,*,#17108,.F.); +#17108 = EDGE_CURVE('',#17079,#17102,#17109,.T.); +#17109 = LINE('',#17110,#17111); +#17110 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17111 = VECTOR('',#17112,1.); +#17112 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#17113 = ORIENTED_EDGE('',*,*,#17078,.F.); +#17114 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17115,#17116) + ,(#17117,#17118 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#17115 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#17116 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17117 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#17118 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17119 = ADVANCED_FACE('',(#17120),#17137,.F.); +#17120 = FACE_BOUND('',#17121,.F.); +#17121 = EDGE_LOOP('',(#17122,#17123,#17130,#17136)); +#17122 = ORIENTED_EDGE('',*,*,#16273,.T.); +#17123 = ORIENTED_EDGE('',*,*,#17124,.T.); +#17124 = EDGE_CURVE('',#16266,#17125,#17127,.T.); +#17125 = VERTEX_POINT('',#17126); +#17126 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17127 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17128,#17129),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17128 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17129 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17130 = ORIENTED_EDGE('',*,*,#17131,.F.); +#17131 = EDGE_CURVE('',#17102,#17125,#17132,.T.); +#17132 = LINE('',#17133,#17134); +#17133 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17134 = VECTOR('',#17135,1.); +#17135 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#17136 = ORIENTED_EDGE('',*,*,#17101,.F.); +#17137 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17138,#17139) + ,(#17140,#17141 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#17138 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#17139 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17140 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17141 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17142 = ADVANCED_FACE('',(#17143),#17224,.F.); +#17143 = FACE_BOUND('',#17144,.F.); +#17144 = EDGE_LOOP('',(#17145,#17146,#17154,#17162,#17170,#17178,#17186, + #17194,#17202,#17210,#17217,#17223)); +#17145 = ORIENTED_EDGE('',*,*,#16265,.T.); +#17146 = ORIENTED_EDGE('',*,*,#17147,.T.); +#17147 = EDGE_CURVE('',#16258,#17148,#17150,.T.); +#17148 = VERTEX_POINT('',#17149); +#17149 = CARTESIAN_POINT('',(1.9495,1.7,0.905)); +#17150 = LINE('',#17151,#17152); +#17151 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17152 = VECTOR('',#17153,1.); +#17153 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17154 = ORIENTED_EDGE('',*,*,#17155,.T.); +#17155 = EDGE_CURVE('',#17148,#17156,#17158,.T.); +#17156 = VERTEX_POINT('',#17157); +#17157 = CARTESIAN_POINT('',(1.9495,0.84,0.905)); +#17158 = LINE('',#17159,#17160); +#17159 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17160 = VECTOR('',#17161,1.); +#17161 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17162 = ORIENTED_EDGE('',*,*,#17163,.T.); +#17163 = EDGE_CURVE('',#17156,#17164,#17166,.T.); +#17164 = VERTEX_POINT('',#17165); +#17165 = CARTESIAN_POINT('',(1.9495,0.43,0.905)); +#17166 = LINE('',#17167,#17168); +#17167 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17168 = VECTOR('',#17169,1.); +#17169 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17170 = ORIENTED_EDGE('',*,*,#17171,.T.); +#17171 = EDGE_CURVE('',#17164,#17172,#17174,.T.); +#17172 = VERTEX_POINT('',#17173); +#17173 = CARTESIAN_POINT('',(1.9495,-0.43,0.905)); +#17174 = LINE('',#17175,#17176); +#17175 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17176 = VECTOR('',#17177,1.); +#17177 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17178 = ORIENTED_EDGE('',*,*,#17179,.T.); +#17179 = EDGE_CURVE('',#17172,#17180,#17182,.T.); +#17180 = VERTEX_POINT('',#17181); +#17181 = CARTESIAN_POINT('',(1.9495,-0.84,0.905)); +#17182 = LINE('',#17183,#17184); +#17183 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17184 = VECTOR('',#17185,1.); +#17185 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17186 = ORIENTED_EDGE('',*,*,#17187,.T.); +#17187 = EDGE_CURVE('',#17180,#17188,#17190,.T.); +#17188 = VERTEX_POINT('',#17189); +#17189 = CARTESIAN_POINT('',(1.9495,-1.7,0.905)); +#17190 = LINE('',#17191,#17192); +#17191 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17192 = VECTOR('',#17193,1.); +#17193 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17194 = ORIENTED_EDGE('',*,*,#17195,.T.); +#17195 = EDGE_CURVE('',#17188,#17196,#17198,.T.); +#17196 = VERTEX_POINT('',#17197); +#17197 = CARTESIAN_POINT('',(1.9495,-2.11,0.905)); +#17198 = LINE('',#17199,#17200); +#17199 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17200 = VECTOR('',#17201,1.); +#17201 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17202 = ORIENTED_EDGE('',*,*,#17203,.T.); +#17203 = EDGE_CURVE('',#17196,#17204,#17206,.T.); +#17204 = VERTEX_POINT('',#17205); +#17205 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17206 = LINE('',#17207,#17208); +#17207 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17208 = VECTOR('',#17209,1.); +#17209 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17210 = ORIENTED_EDGE('',*,*,#17211,.T.); +#17211 = EDGE_CURVE('',#17204,#17212,#17214,.T.); +#17212 = VERTEX_POINT('',#17213); +#17213 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#17214 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17215,#17216),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17215 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17216 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#17217 = ORIENTED_EDGE('',*,*,#17218,.F.); +#17218 = EDGE_CURVE('',#17125,#17212,#17219,.T.); +#17219 = LINE('',#17220,#17221); +#17220 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17221 = VECTOR('',#17222,1.); +#17222 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17223 = ORIENTED_EDGE('',*,*,#17124,.F.); +#17224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17225,#17226) + ,(#17227,#17228 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#17225 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17226 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17227 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17228 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#17229 = ADVANCED_FACE('',(#17230),#17262,.F.); +#17230 = FACE_BOUND('',#17231,.F.); +#17231 = EDGE_LOOP('',(#17232,#17240,#17248,#17254,#17260,#17261)); +#17232 = ORIENTED_EDGE('',*,*,#17233,.F.); +#17233 = EDGE_CURVE('',#17234,#16250,#17236,.T.); +#17234 = VERTEX_POINT('',#17235); +#17235 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17236 = LINE('',#17237,#17238); +#17237 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17238 = VECTOR('',#17239,1.); +#17239 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17240 = ORIENTED_EDGE('',*,*,#17241,.T.); +#17241 = EDGE_CURVE('',#17234,#17242,#17244,.T.); +#17242 = VERTEX_POINT('',#17243); +#17243 = CARTESIAN_POINT('',(2.25,1.7,0.905)); +#17244 = LINE('',#17245,#17246); +#17245 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17246 = VECTOR('',#17247,1.); +#17247 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17248 = ORIENTED_EDGE('',*,*,#17249,.T.); +#17249 = EDGE_CURVE('',#17242,#16656,#17250,.T.); +#17250 = LINE('',#17251,#17252); +#17251 = CARTESIAN_POINT('',(2.25,1.7,0.905)); +#17252 = VECTOR('',#17253,1.); +#17253 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17254 = ORIENTED_EDGE('',*,*,#17255,.T.); +#17255 = EDGE_CURVE('',#16656,#17148,#17256,.T.); +#17256 = LINE('',#17257,#17258); +#17257 = CARTESIAN_POINT('',(2.25,1.7,0.905)); +#17258 = VECTOR('',#17259,1.); +#17259 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17260 = ORIENTED_EDGE('',*,*,#17147,.F.); +#17261 = ORIENTED_EDGE('',*,*,#16257,.F.); +#17262 = PLANE('',#17263); +#17263 = AXIS2_PLACEMENT_3D('',#17264,#17265,#17266); +#17264 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17265 = DIRECTION('',(0.,0.,-1.)); +#17266 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#17267 = ADVANCED_FACE('',(#17268),#17311,.F.); +#17268 = FACE_BOUND('',#17269,.F.); +#17269 = EDGE_LOOP('',(#17270,#17271,#17277,#17278,#17286,#17294,#17300, + #17301,#17307,#17308,#17309,#17310)); +#17270 = ORIENTED_EDGE('',*,*,#16359,.T.); +#17271 = ORIENTED_EDGE('',*,*,#17272,.T.); +#17272 = EDGE_CURVE('',#16352,#16994,#17273,.T.); +#17273 = LINE('',#17274,#17275); +#17274 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#17275 = VECTOR('',#17276,1.); +#17276 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17277 = ORIENTED_EDGE('',*,*,#16991,.F.); +#17278 = ORIENTED_EDGE('',*,*,#17279,.F.); +#17279 = EDGE_CURVE('',#17280,#16992,#17282,.T.); +#17280 = VERTEX_POINT('',#17281); +#17281 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#17282 = LINE('',#17283,#17284); +#17283 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#17284 = VECTOR('',#17285,1.); +#17285 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#17286 = ORIENTED_EDGE('',*,*,#17287,.F.); +#17287 = EDGE_CURVE('',#17288,#17280,#17290,.T.); +#17288 = VERTEX_POINT('',#17289); +#17289 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#17290 = LINE('',#17291,#17292); +#17291 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#17292 = VECTOR('',#17293,1.); +#17293 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17294 = ORIENTED_EDGE('',*,*,#17295,.F.); +#17295 = EDGE_CURVE('',#17204,#17288,#17296,.T.); +#17296 = LINE('',#17297,#17298); +#17297 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17298 = VECTOR('',#17299,1.); +#17299 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#17300 = ORIENTED_EDGE('',*,*,#17203,.F.); +#17301 = ORIENTED_EDGE('',*,*,#17302,.F.); +#17302 = EDGE_CURVE('',#16842,#17196,#17303,.T.); +#17303 = LINE('',#17304,#17305); +#17304 = CARTESIAN_POINT('',(2.25,-2.11,0.905)); +#17305 = VECTOR('',#17306,1.); +#17306 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17307 = ORIENTED_EDGE('',*,*,#16857,.T.); +#17308 = ORIENTED_EDGE('',*,*,#16902,.T.); +#17309 = ORIENTED_EDGE('',*,*,#16919,.T.); +#17310 = ORIENTED_EDGE('',*,*,#16873,.T.); +#17311 = PLANE('',#17312); +#17312 = AXIS2_PLACEMENT_3D('',#17313,#17314,#17315); +#17313 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17314 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17315 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17316 = ADVANCED_FACE('',(#17317),#17403,.F.); +#17317 = FACE_BOUND('',#17318,.F.); +#17318 = EDGE_LOOP('',(#17319,#17320,#17321,#17330,#17338,#17347,#17355, + #17363,#17371,#17380,#17388,#17397)); +#17319 = ORIENTED_EDGE('',*,*,#16351,.F.); +#17320 = ORIENTED_EDGE('',*,*,#16373,.T.); +#17321 = ORIENTED_EDGE('',*,*,#17322,.T.); +#17322 = EDGE_CURVE('',#16374,#17323,#17325,.T.); +#17323 = VERTEX_POINT('',#17324); +#17324 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#17325 = CIRCLE('',#17326,0.1); +#17326 = AXIS2_PLACEMENT_3D('',#17327,#17328,#17329); +#17327 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#17328 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17329 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17330 = ORIENTED_EDGE('',*,*,#17331,.T.); +#17331 = EDGE_CURVE('',#17323,#17332,#17334,.T.); +#17332 = VERTEX_POINT('',#17333); +#17333 = CARTESIAN_POINT('',(-2.404962786068,-2.11,0.256169064923)); +#17334 = LINE('',#17335,#17336); +#17335 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#17336 = VECTOR('',#17337,1.); +#17337 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17338 = ORIENTED_EDGE('',*,*,#17339,.T.); +#17339 = EDGE_CURVE('',#17332,#17340,#17342,.T.); +#17340 = VERTEX_POINT('',#17341); +#17341 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#17342 = CIRCLE('',#17343,0.31); +#17343 = AXIS2_PLACEMENT_3D('',#17344,#17345,#17346); +#17344 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#17345 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17346 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17347 = ORIENTED_EDGE('',*,*,#17348,.T.); +#17348 = EDGE_CURVE('',#17340,#17349,#17351,.T.); +#17349 = VERTEX_POINT('',#17350); +#17350 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#17351 = LINE('',#17352,#17353); +#17352 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#17353 = VECTOR('',#17354,1.); +#17354 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17355 = ORIENTED_EDGE('',*,*,#17356,.T.); +#17356 = EDGE_CURVE('',#17349,#17357,#17359,.T.); +#17357 = VERTEX_POINT('',#17358); +#17358 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#17359 = LINE('',#17360,#17361); +#17360 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#17361 = VECTOR('',#17362,1.); +#17362 = DIRECTION('',(0.,0.,1.)); +#17363 = ORIENTED_EDGE('',*,*,#17364,.T.); +#17364 = EDGE_CURVE('',#17357,#17365,#17367,.T.); +#17365 = VERTEX_POINT('',#17366); +#17366 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.21)); +#17367 = LINE('',#17368,#17369); +#17368 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#17369 = VECTOR('',#17370,1.); +#17370 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17371 = ORIENTED_EDGE('',*,*,#17372,.T.); +#17372 = EDGE_CURVE('',#17365,#17373,#17375,.T.); +#17373 = VERTEX_POINT('',#17374); +#17374 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#17375 = CIRCLE('',#17376,0.1); +#17376 = AXIS2_PLACEMENT_3D('',#17377,#17378,#17379); +#17377 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#17378 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17379 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17380 = ORIENTED_EDGE('',*,*,#17381,.T.); +#17381 = EDGE_CURVE('',#17373,#17382,#17384,.T.); +#17382 = VERTEX_POINT('',#17383); +#17383 = CARTESIAN_POINT('',(-2.555290403434,-2.11,0.648830935077)); +#17384 = LINE('',#17385,#17386); +#17385 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#17386 = VECTOR('',#17387,1.); +#17387 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17388 = ORIENTED_EDGE('',*,*,#17389,.T.); +#17389 = EDGE_CURVE('',#17382,#17390,#17392,.T.); +#17390 = VERTEX_POINT('',#17391); +#17391 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#17392 = CIRCLE('',#17393,0.31); +#17393 = AXIS2_PLACEMENT_3D('',#17394,#17395,#17396); +#17394 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#17395 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17396 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17397 = ORIENTED_EDGE('',*,*,#17398,.T.); +#17398 = EDGE_CURVE('',#17390,#16352,#17399,.T.); +#17399 = LINE('',#17400,#17401); +#17400 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#17401 = VECTOR('',#17402,1.); +#17402 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17403 = PLANE('',#17404); +#17404 = AXIS2_PLACEMENT_3D('',#17405,#17406,#17407); +#17405 = CARTESIAN_POINT('',(-2.476022294864,-2.11,0.454762084394)); +#17406 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17407 = DIRECTION('',(0.,-0.,1.)); +#17408 = ADVANCED_FACE('',(#17409),#17428,.F.); +#17409 = FACE_BOUND('',#17410,.F.); +#17410 = EDGE_LOOP('',(#17411,#17412,#17421,#17427)); +#17411 = ORIENTED_EDGE('',*,*,#16390,.T.); +#17412 = ORIENTED_EDGE('',*,*,#17413,.T.); +#17413 = EDGE_CURVE('',#16383,#17414,#17416,.T.); +#17414 = VERTEX_POINT('',#17415); +#17415 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.612364817767)); +#17416 = CIRCLE('',#17417,0.1); +#17417 = AXIS2_PLACEMENT_3D('',#17418,#17419,#17420); +#17418 = CARTESIAN_POINT('',(-2.25,-1.7,0.595)); +#17419 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17420 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17421 = ORIENTED_EDGE('',*,*,#17422,.F.); +#17422 = EDGE_CURVE('',#17323,#17414,#17423,.T.); +#17423 = LINE('',#17424,#17425); +#17424 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#17425 = VECTOR('',#17426,1.); +#17426 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17427 = ORIENTED_EDGE('',*,*,#17322,.F.); +#17428 = CYLINDRICAL_SURFACE('',#17429,0.1); +#17429 = AXIS2_PLACEMENT_3D('',#17430,#17431,#17432); +#17430 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#17431 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#17432 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17433 = ADVANCED_FACE('',(#17434),#17512,.T.); +#17434 = FACE_BOUND('',#17435,.T.); +#17435 = EDGE_LOOP('',(#17436,#17437,#17438,#17439,#17447,#17456,#17464, + #17472,#17480,#17489,#17497,#17506)); +#17436 = ORIENTED_EDGE('',*,*,#16404,.F.); +#17437 = ORIENTED_EDGE('',*,*,#16382,.T.); +#17438 = ORIENTED_EDGE('',*,*,#17413,.T.); +#17439 = ORIENTED_EDGE('',*,*,#17440,.T.); +#17440 = EDGE_CURVE('',#17414,#17441,#17443,.T.); +#17441 = VERTEX_POINT('',#17442); +#17442 = CARTESIAN_POINT('',(-2.404962786068,-1.7,0.256169064923)); +#17443 = LINE('',#17444,#17445); +#17444 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.612364817767)); +#17445 = VECTOR('',#17446,1.); +#17446 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17447 = ORIENTED_EDGE('',*,*,#17448,.T.); +#17448 = EDGE_CURVE('',#17441,#17449,#17451,.T.); +#17449 = VERTEX_POINT('',#17450); +#17450 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.)); +#17451 = CIRCLE('',#17452,0.31); +#17452 = AXIS2_PLACEMENT_3D('',#17453,#17454,#17455); +#17453 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.31)); +#17454 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17455 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17456 = ORIENTED_EDGE('',*,*,#17457,.T.); +#17457 = EDGE_CURVE('',#17449,#17458,#17460,.T.); +#17458 = VERTEX_POINT('',#17459); +#17459 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#17460 = LINE('',#17461,#17462); +#17461 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.)); +#17462 = VECTOR('',#17463,1.); +#17463 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17464 = ORIENTED_EDGE('',*,*,#17465,.T.); +#17465 = EDGE_CURVE('',#17458,#17466,#17468,.T.); +#17466 = VERTEX_POINT('',#17467); +#17467 = CARTESIAN_POINT('',(-3.,-1.7,0.21)); +#17468 = LINE('',#17469,#17470); +#17469 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#17470 = VECTOR('',#17471,1.); +#17471 = DIRECTION('',(0.,0.,1.)); +#17472 = ORIENTED_EDGE('',*,*,#17473,.T.); +#17473 = EDGE_CURVE('',#17466,#17474,#17476,.T.); +#17474 = VERTEX_POINT('',#17475); +#17475 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.21)); +#17476 = LINE('',#17477,#17478); +#17477 = CARTESIAN_POINT('',(-3.,-1.7,0.21)); +#17478 = VECTOR('',#17479,1.); +#17479 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17480 = ORIENTED_EDGE('',*,*,#17481,.T.); +#17481 = EDGE_CURVE('',#17474,#17482,#17484,.T.); +#17482 = VERTEX_POINT('',#17483); +#17483 = CARTESIAN_POINT('',(-2.611772414201,-1.7,0.292635182233)); +#17484 = CIRCLE('',#17485,0.1); +#17485 = AXIS2_PLACEMENT_3D('',#17486,#17487,#17488); +#17486 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.31)); +#17487 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17488 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17489 = ORIENTED_EDGE('',*,*,#17490,.T.); +#17490 = EDGE_CURVE('',#17482,#17491,#17493,.T.); +#17491 = VERTEX_POINT('',#17492); +#17492 = CARTESIAN_POINT('',(-2.555290403434,-1.7,0.648830935077)); +#17493 = LINE('',#17494,#17495); +#17494 = CARTESIAN_POINT('',(-2.611772414201,-1.7,0.292635182233)); +#17495 = VECTOR('',#17496,1.); +#17496 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17497 = ORIENTED_EDGE('',*,*,#17498,.T.); +#17498 = EDGE_CURVE('',#17491,#17499,#17501,.T.); +#17499 = VERTEX_POINT('',#17500); +#17500 = CARTESIAN_POINT('',(-2.25,-1.7,0.905)); +#17501 = CIRCLE('',#17502,0.31); +#17502 = AXIS2_PLACEMENT_3D('',#17503,#17504,#17505); +#17503 = CARTESIAN_POINT('',(-2.25,-1.7,0.595)); +#17504 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17505 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17506 = ORIENTED_EDGE('',*,*,#17507,.T.); +#17507 = EDGE_CURVE('',#17499,#16405,#17508,.T.); +#17508 = LINE('',#17509,#17510); +#17509 = CARTESIAN_POINT('',(-2.25,-1.7,0.905)); +#17510 = VECTOR('',#17511,1.); +#17511 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17512 = PLANE('',#17513); +#17513 = AXIS2_PLACEMENT_3D('',#17514,#17515,#17516); +#17514 = CARTESIAN_POINT('',(-2.476022294864,-1.7,0.454762084394)); +#17515 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17516 = DIRECTION('',(0.,-0.,1.)); +#17517 = ADVANCED_FACE('',(#17518),#17534,.F.); +#17518 = FACE_BOUND('',#17519,.F.); +#17519 = EDGE_LOOP('',(#17520,#17521,#17527,#17528)); +#17520 = ORIENTED_EDGE('',*,*,#16421,.T.); +#17521 = ORIENTED_EDGE('',*,*,#17522,.T.); +#17522 = EDGE_CURVE('',#16414,#17010,#17523,.T.); +#17523 = LINE('',#17524,#17525); +#17524 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#17525 = VECTOR('',#17526,1.); +#17526 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17527 = ORIENTED_EDGE('',*,*,#17009,.F.); +#17528 = ORIENTED_EDGE('',*,*,#17529,.F.); +#17529 = EDGE_CURVE('',#16405,#17002,#17530,.T.); +#17530 = LINE('',#17531,#17532); +#17531 = CARTESIAN_POINT('',(-2.25,-1.7,0.905)); +#17532 = VECTOR('',#17533,1.); +#17533 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17534 = PLANE('',#17535); +#17535 = AXIS2_PLACEMENT_3D('',#17536,#17537,#17538); +#17536 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17537 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17538 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17539 = ADVANCED_FACE('',(#17540),#17626,.F.); +#17540 = FACE_BOUND('',#17541,.F.); +#17541 = EDGE_LOOP('',(#17542,#17543,#17544,#17553,#17561,#17570,#17578, + #17586,#17594,#17603,#17611,#17620)); +#17542 = ORIENTED_EDGE('',*,*,#16413,.F.); +#17543 = ORIENTED_EDGE('',*,*,#16435,.T.); +#17544 = ORIENTED_EDGE('',*,*,#17545,.T.); +#17545 = EDGE_CURVE('',#16436,#17546,#17548,.T.); +#17546 = VERTEX_POINT('',#17547); +#17547 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#17548 = CIRCLE('',#17549,0.1); +#17549 = AXIS2_PLACEMENT_3D('',#17550,#17551,#17552); +#17550 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#17551 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17552 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17553 = ORIENTED_EDGE('',*,*,#17554,.T.); +#17554 = EDGE_CURVE('',#17546,#17555,#17557,.T.); +#17555 = VERTEX_POINT('',#17556); +#17556 = CARTESIAN_POINT('',(-2.404962786068,-0.84,0.256169064923)); +#17557 = LINE('',#17558,#17559); +#17558 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#17559 = VECTOR('',#17560,1.); +#17560 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17561 = ORIENTED_EDGE('',*,*,#17562,.T.); +#17562 = EDGE_CURVE('',#17555,#17563,#17565,.T.); +#17563 = VERTEX_POINT('',#17564); +#17564 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#17565 = CIRCLE('',#17566,0.31); +#17566 = AXIS2_PLACEMENT_3D('',#17567,#17568,#17569); +#17567 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#17568 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17569 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17570 = ORIENTED_EDGE('',*,*,#17571,.T.); +#17571 = EDGE_CURVE('',#17563,#17572,#17574,.T.); +#17572 = VERTEX_POINT('',#17573); +#17573 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#17574 = LINE('',#17575,#17576); +#17575 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#17576 = VECTOR('',#17577,1.); +#17577 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17578 = ORIENTED_EDGE('',*,*,#17579,.T.); +#17579 = EDGE_CURVE('',#17572,#17580,#17582,.T.); +#17580 = VERTEX_POINT('',#17581); +#17581 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#17582 = LINE('',#17583,#17584); +#17583 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#17584 = VECTOR('',#17585,1.); +#17585 = DIRECTION('',(0.,0.,1.)); +#17586 = ORIENTED_EDGE('',*,*,#17587,.T.); +#17587 = EDGE_CURVE('',#17580,#17588,#17590,.T.); +#17588 = VERTEX_POINT('',#17589); +#17589 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.21)); +#17590 = LINE('',#17591,#17592); +#17591 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#17592 = VECTOR('',#17593,1.); +#17593 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17594 = ORIENTED_EDGE('',*,*,#17595,.T.); +#17595 = EDGE_CURVE('',#17588,#17596,#17598,.T.); +#17596 = VERTEX_POINT('',#17597); +#17597 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#17598 = CIRCLE('',#17599,0.1); +#17599 = AXIS2_PLACEMENT_3D('',#17600,#17601,#17602); +#17600 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#17601 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17602 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17603 = ORIENTED_EDGE('',*,*,#17604,.T.); +#17604 = EDGE_CURVE('',#17596,#17605,#17607,.T.); +#17605 = VERTEX_POINT('',#17606); +#17606 = CARTESIAN_POINT('',(-2.555290403434,-0.84,0.648830935077)); +#17607 = LINE('',#17608,#17609); +#17608 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#17609 = VECTOR('',#17610,1.); +#17610 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17611 = ORIENTED_EDGE('',*,*,#17612,.T.); +#17612 = EDGE_CURVE('',#17605,#17613,#17615,.T.); +#17613 = VERTEX_POINT('',#17614); +#17614 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#17615 = CIRCLE('',#17616,0.31); +#17616 = AXIS2_PLACEMENT_3D('',#17617,#17618,#17619); +#17617 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#17618 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17619 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17620 = ORIENTED_EDGE('',*,*,#17621,.T.); +#17621 = EDGE_CURVE('',#17613,#16414,#17622,.T.); +#17622 = LINE('',#17623,#17624); +#17623 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#17624 = VECTOR('',#17625,1.); +#17625 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17626 = PLANE('',#17627); +#17627 = AXIS2_PLACEMENT_3D('',#17628,#17629,#17630); +#17628 = CARTESIAN_POINT('',(-2.476022294864,-0.84,0.454762084394)); +#17629 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17630 = DIRECTION('',(0.,-0.,1.)); +#17631 = ADVANCED_FACE('',(#17632),#17651,.F.); +#17632 = FACE_BOUND('',#17633,.F.); +#17633 = EDGE_LOOP('',(#17634,#17635,#17644,#17650)); +#17634 = ORIENTED_EDGE('',*,*,#16452,.T.); +#17635 = ORIENTED_EDGE('',*,*,#17636,.T.); +#17636 = EDGE_CURVE('',#16445,#17637,#17639,.T.); +#17637 = VERTEX_POINT('',#17638); +#17638 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.612364817767)); +#17639 = CIRCLE('',#17640,0.1); +#17640 = AXIS2_PLACEMENT_3D('',#17641,#17642,#17643); +#17641 = CARTESIAN_POINT('',(-2.25,-0.43,0.595)); +#17642 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17643 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17644 = ORIENTED_EDGE('',*,*,#17645,.F.); +#17645 = EDGE_CURVE('',#17546,#17637,#17646,.T.); +#17646 = LINE('',#17647,#17648); +#17647 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#17648 = VECTOR('',#17649,1.); +#17649 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17650 = ORIENTED_EDGE('',*,*,#17545,.F.); +#17651 = CYLINDRICAL_SURFACE('',#17652,0.1); +#17652 = AXIS2_PLACEMENT_3D('',#17653,#17654,#17655); +#17653 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#17654 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#17655 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17656 = ADVANCED_FACE('',(#17657),#17735,.T.); +#17657 = FACE_BOUND('',#17658,.T.); +#17658 = EDGE_LOOP('',(#17659,#17660,#17661,#17662,#17670,#17679,#17687, + #17695,#17703,#17712,#17720,#17729)); +#17659 = ORIENTED_EDGE('',*,*,#16466,.F.); +#17660 = ORIENTED_EDGE('',*,*,#16444,.T.); +#17661 = ORIENTED_EDGE('',*,*,#17636,.T.); +#17662 = ORIENTED_EDGE('',*,*,#17663,.T.); +#17663 = EDGE_CURVE('',#17637,#17664,#17666,.T.); +#17664 = VERTEX_POINT('',#17665); +#17665 = CARTESIAN_POINT('',(-2.404962786068,-0.43,0.256169064923)); +#17666 = LINE('',#17667,#17668); +#17667 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.612364817767)); +#17668 = VECTOR('',#17669,1.); +#17669 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17670 = ORIENTED_EDGE('',*,*,#17671,.T.); +#17671 = EDGE_CURVE('',#17664,#17672,#17674,.T.); +#17672 = VERTEX_POINT('',#17673); +#17673 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.)); +#17674 = CIRCLE('',#17675,0.31); +#17675 = AXIS2_PLACEMENT_3D('',#17676,#17677,#17678); +#17676 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.31)); +#17677 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17678 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17679 = ORIENTED_EDGE('',*,*,#17680,.T.); +#17680 = EDGE_CURVE('',#17672,#17681,#17683,.T.); +#17681 = VERTEX_POINT('',#17682); +#17682 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#17683 = LINE('',#17684,#17685); +#17684 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.)); +#17685 = VECTOR('',#17686,1.); +#17686 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17687 = ORIENTED_EDGE('',*,*,#17688,.T.); +#17688 = EDGE_CURVE('',#17681,#17689,#17691,.T.); +#17689 = VERTEX_POINT('',#17690); +#17690 = CARTESIAN_POINT('',(-3.,-0.43,0.21)); +#17691 = LINE('',#17692,#17693); +#17692 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#17693 = VECTOR('',#17694,1.); +#17694 = DIRECTION('',(0.,0.,1.)); +#17695 = ORIENTED_EDGE('',*,*,#17696,.T.); +#17696 = EDGE_CURVE('',#17689,#17697,#17699,.T.); +#17697 = VERTEX_POINT('',#17698); +#17698 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.21)); +#17699 = LINE('',#17700,#17701); +#17700 = CARTESIAN_POINT('',(-3.,-0.43,0.21)); +#17701 = VECTOR('',#17702,1.); +#17702 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17703 = ORIENTED_EDGE('',*,*,#17704,.T.); +#17704 = EDGE_CURVE('',#17697,#17705,#17707,.T.); +#17705 = VERTEX_POINT('',#17706); +#17706 = CARTESIAN_POINT('',(-2.611772414201,-0.43,0.292635182233)); +#17707 = CIRCLE('',#17708,0.1); +#17708 = AXIS2_PLACEMENT_3D('',#17709,#17710,#17711); +#17709 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.31)); +#17710 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17711 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17712 = ORIENTED_EDGE('',*,*,#17713,.T.); +#17713 = EDGE_CURVE('',#17705,#17714,#17716,.T.); +#17714 = VERTEX_POINT('',#17715); +#17715 = CARTESIAN_POINT('',(-2.555290403434,-0.43,0.648830935077)); +#17716 = LINE('',#17717,#17718); +#17717 = CARTESIAN_POINT('',(-2.611772414201,-0.43,0.292635182233)); +#17718 = VECTOR('',#17719,1.); +#17719 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17720 = ORIENTED_EDGE('',*,*,#17721,.T.); +#17721 = EDGE_CURVE('',#17714,#17722,#17724,.T.); +#17722 = VERTEX_POINT('',#17723); +#17723 = CARTESIAN_POINT('',(-2.25,-0.43,0.905)); +#17724 = CIRCLE('',#17725,0.31); +#17725 = AXIS2_PLACEMENT_3D('',#17726,#17727,#17728); +#17726 = CARTESIAN_POINT('',(-2.25,-0.43,0.595)); +#17727 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17728 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17729 = ORIENTED_EDGE('',*,*,#17730,.T.); +#17730 = EDGE_CURVE('',#17722,#16467,#17731,.T.); +#17731 = LINE('',#17732,#17733); +#17732 = CARTESIAN_POINT('',(-2.25,-0.43,0.905)); +#17733 = VECTOR('',#17734,1.); +#17734 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17735 = PLANE('',#17736); +#17736 = AXIS2_PLACEMENT_3D('',#17737,#17738,#17739); +#17737 = CARTESIAN_POINT('',(-2.476022294864,-0.43,0.454762084394)); +#17738 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17739 = DIRECTION('',(0.,-0.,1.)); +#17740 = ADVANCED_FACE('',(#17741),#17757,.F.); +#17741 = FACE_BOUND('',#17742,.F.); +#17742 = EDGE_LOOP('',(#17743,#17744,#17750,#17751)); +#17743 = ORIENTED_EDGE('',*,*,#16483,.T.); +#17744 = ORIENTED_EDGE('',*,*,#17745,.T.); +#17745 = EDGE_CURVE('',#16476,#17026,#17746,.T.); +#17746 = LINE('',#17747,#17748); +#17747 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#17748 = VECTOR('',#17749,1.); +#17749 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17750 = ORIENTED_EDGE('',*,*,#17025,.F.); +#17751 = ORIENTED_EDGE('',*,*,#17752,.F.); +#17752 = EDGE_CURVE('',#16467,#17018,#17753,.T.); +#17753 = LINE('',#17754,#17755); +#17754 = CARTESIAN_POINT('',(-2.25,-0.43,0.905)); +#17755 = VECTOR('',#17756,1.); +#17756 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17757 = PLANE('',#17758); +#17758 = AXIS2_PLACEMENT_3D('',#17759,#17760,#17761); +#17759 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17760 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17761 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17762 = ADVANCED_FACE('',(#17763),#17849,.F.); +#17763 = FACE_BOUND('',#17764,.F.); +#17764 = EDGE_LOOP('',(#17765,#17766,#17767,#17776,#17784,#17793,#17801, + #17809,#17817,#17826,#17834,#17843)); +#17765 = ORIENTED_EDGE('',*,*,#16475,.F.); +#17766 = ORIENTED_EDGE('',*,*,#16497,.T.); +#17767 = ORIENTED_EDGE('',*,*,#17768,.T.); +#17768 = EDGE_CURVE('',#16498,#17769,#17771,.T.); +#17769 = VERTEX_POINT('',#17770); +#17770 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#17771 = CIRCLE('',#17772,0.1); +#17772 = AXIS2_PLACEMENT_3D('',#17773,#17774,#17775); +#17773 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#17774 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17775 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17776 = ORIENTED_EDGE('',*,*,#17777,.T.); +#17777 = EDGE_CURVE('',#17769,#17778,#17780,.T.); +#17778 = VERTEX_POINT('',#17779); +#17779 = CARTESIAN_POINT('',(-2.404962786068,0.43,0.256169064923)); +#17780 = LINE('',#17781,#17782); +#17781 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#17782 = VECTOR('',#17783,1.); +#17783 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17784 = ORIENTED_EDGE('',*,*,#17785,.T.); +#17785 = EDGE_CURVE('',#17778,#17786,#17788,.T.); +#17786 = VERTEX_POINT('',#17787); +#17787 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#17788 = CIRCLE('',#17789,0.31); +#17789 = AXIS2_PLACEMENT_3D('',#17790,#17791,#17792); +#17790 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#17791 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17792 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17793 = ORIENTED_EDGE('',*,*,#17794,.T.); +#17794 = EDGE_CURVE('',#17786,#17795,#17797,.T.); +#17795 = VERTEX_POINT('',#17796); +#17796 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#17797 = LINE('',#17798,#17799); +#17798 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#17799 = VECTOR('',#17800,1.); +#17800 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17801 = ORIENTED_EDGE('',*,*,#17802,.T.); +#17802 = EDGE_CURVE('',#17795,#17803,#17805,.T.); +#17803 = VERTEX_POINT('',#17804); +#17804 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#17805 = LINE('',#17806,#17807); +#17806 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#17807 = VECTOR('',#17808,1.); +#17808 = DIRECTION('',(0.,0.,1.)); +#17809 = ORIENTED_EDGE('',*,*,#17810,.T.); +#17810 = EDGE_CURVE('',#17803,#17811,#17813,.T.); +#17811 = VERTEX_POINT('',#17812); +#17812 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.21)); +#17813 = LINE('',#17814,#17815); +#17814 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#17815 = VECTOR('',#17816,1.); +#17816 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17817 = ORIENTED_EDGE('',*,*,#17818,.T.); +#17818 = EDGE_CURVE('',#17811,#17819,#17821,.T.); +#17819 = VERTEX_POINT('',#17820); +#17820 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#17821 = CIRCLE('',#17822,0.1); +#17822 = AXIS2_PLACEMENT_3D('',#17823,#17824,#17825); +#17823 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#17824 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17825 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17826 = ORIENTED_EDGE('',*,*,#17827,.T.); +#17827 = EDGE_CURVE('',#17819,#17828,#17830,.T.); +#17828 = VERTEX_POINT('',#17829); +#17829 = CARTESIAN_POINT('',(-2.555290403434,0.43,0.648830935077)); +#17830 = LINE('',#17831,#17832); +#17831 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#17832 = VECTOR('',#17833,1.); +#17833 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17834 = ORIENTED_EDGE('',*,*,#17835,.T.); +#17835 = EDGE_CURVE('',#17828,#17836,#17838,.T.); +#17836 = VERTEX_POINT('',#17837); +#17837 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#17838 = CIRCLE('',#17839,0.31); +#17839 = AXIS2_PLACEMENT_3D('',#17840,#17841,#17842); +#17840 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#17841 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17842 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17843 = ORIENTED_EDGE('',*,*,#17844,.T.); +#17844 = EDGE_CURVE('',#17836,#16476,#17845,.T.); +#17845 = LINE('',#17846,#17847); +#17846 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#17847 = VECTOR('',#17848,1.); +#17848 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17849 = PLANE('',#17850); +#17850 = AXIS2_PLACEMENT_3D('',#17851,#17852,#17853); +#17851 = CARTESIAN_POINT('',(-2.476022294864,0.43,0.454762084394)); +#17852 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17853 = DIRECTION('',(0.,-0.,1.)); +#17854 = ADVANCED_FACE('',(#17855),#17874,.F.); +#17855 = FACE_BOUND('',#17856,.F.); +#17856 = EDGE_LOOP('',(#17857,#17858,#17867,#17873)); +#17857 = ORIENTED_EDGE('',*,*,#16514,.T.); +#17858 = ORIENTED_EDGE('',*,*,#17859,.T.); +#17859 = EDGE_CURVE('',#16507,#17860,#17862,.T.); +#17860 = VERTEX_POINT('',#17861); +#17861 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.612364817767)); +#17862 = CIRCLE('',#17863,0.1); +#17863 = AXIS2_PLACEMENT_3D('',#17864,#17865,#17866); +#17864 = CARTESIAN_POINT('',(-2.25,0.84,0.595)); +#17865 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17866 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17867 = ORIENTED_EDGE('',*,*,#17868,.F.); +#17868 = EDGE_CURVE('',#17769,#17860,#17869,.T.); +#17869 = LINE('',#17870,#17871); +#17870 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#17871 = VECTOR('',#17872,1.); +#17872 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17873 = ORIENTED_EDGE('',*,*,#17768,.F.); +#17874 = CYLINDRICAL_SURFACE('',#17875,0.1); +#17875 = AXIS2_PLACEMENT_3D('',#17876,#17877,#17878); +#17876 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#17877 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#17878 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17879 = ADVANCED_FACE('',(#17880),#17958,.T.); +#17880 = FACE_BOUND('',#17881,.T.); +#17881 = EDGE_LOOP('',(#17882,#17883,#17884,#17885,#17893,#17902,#17910, + #17918,#17926,#17935,#17943,#17952)); +#17882 = ORIENTED_EDGE('',*,*,#16528,.F.); +#17883 = ORIENTED_EDGE('',*,*,#16506,.T.); +#17884 = ORIENTED_EDGE('',*,*,#17859,.T.); +#17885 = ORIENTED_EDGE('',*,*,#17886,.T.); +#17886 = EDGE_CURVE('',#17860,#17887,#17889,.T.); +#17887 = VERTEX_POINT('',#17888); +#17888 = CARTESIAN_POINT('',(-2.404962786068,0.84,0.256169064923)); +#17889 = LINE('',#17890,#17891); +#17890 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.612364817767)); +#17891 = VECTOR('',#17892,1.); +#17892 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17893 = ORIENTED_EDGE('',*,*,#17894,.T.); +#17894 = EDGE_CURVE('',#17887,#17895,#17897,.T.); +#17895 = VERTEX_POINT('',#17896); +#17896 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.)); +#17897 = CIRCLE('',#17898,0.31); +#17898 = AXIS2_PLACEMENT_3D('',#17899,#17900,#17901); +#17899 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.31)); +#17900 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17901 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17902 = ORIENTED_EDGE('',*,*,#17903,.T.); +#17903 = EDGE_CURVE('',#17895,#17904,#17906,.T.); +#17904 = VERTEX_POINT('',#17905); +#17905 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#17906 = LINE('',#17907,#17908); +#17907 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.)); +#17908 = VECTOR('',#17909,1.); +#17909 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17910 = ORIENTED_EDGE('',*,*,#17911,.T.); +#17911 = EDGE_CURVE('',#17904,#17912,#17914,.T.); +#17912 = VERTEX_POINT('',#17913); +#17913 = CARTESIAN_POINT('',(-3.,0.84,0.21)); +#17914 = LINE('',#17915,#17916); +#17915 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#17916 = VECTOR('',#17917,1.); +#17917 = DIRECTION('',(0.,0.,1.)); +#17918 = ORIENTED_EDGE('',*,*,#17919,.T.); +#17919 = EDGE_CURVE('',#17912,#17920,#17922,.T.); +#17920 = VERTEX_POINT('',#17921); +#17921 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.21)); +#17922 = LINE('',#17923,#17924); +#17923 = CARTESIAN_POINT('',(-3.,0.84,0.21)); +#17924 = VECTOR('',#17925,1.); +#17925 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17926 = ORIENTED_EDGE('',*,*,#17927,.T.); +#17927 = EDGE_CURVE('',#17920,#17928,#17930,.T.); +#17928 = VERTEX_POINT('',#17929); +#17929 = CARTESIAN_POINT('',(-2.611772414201,0.84,0.292635182233)); +#17930 = CIRCLE('',#17931,0.1); +#17931 = AXIS2_PLACEMENT_3D('',#17932,#17933,#17934); +#17932 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.31)); +#17933 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17934 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17935 = ORIENTED_EDGE('',*,*,#17936,.T.); +#17936 = EDGE_CURVE('',#17928,#17937,#17939,.T.); +#17937 = VERTEX_POINT('',#17938); +#17938 = CARTESIAN_POINT('',(-2.555290403434,0.84,0.648830935077)); +#17939 = LINE('',#17940,#17941); +#17940 = CARTESIAN_POINT('',(-2.611772414201,0.84,0.292635182233)); +#17941 = VECTOR('',#17942,1.); +#17942 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17943 = ORIENTED_EDGE('',*,*,#17944,.T.); +#17944 = EDGE_CURVE('',#17937,#17945,#17947,.T.); +#17945 = VERTEX_POINT('',#17946); +#17946 = CARTESIAN_POINT('',(-2.25,0.84,0.905)); +#17947 = CIRCLE('',#17948,0.31); +#17948 = AXIS2_PLACEMENT_3D('',#17949,#17950,#17951); +#17949 = CARTESIAN_POINT('',(-2.25,0.84,0.595)); +#17950 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17951 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17952 = ORIENTED_EDGE('',*,*,#17953,.T.); +#17953 = EDGE_CURVE('',#17945,#16529,#17954,.T.); +#17954 = LINE('',#17955,#17956); +#17955 = CARTESIAN_POINT('',(-2.25,0.84,0.905)); +#17956 = VECTOR('',#17957,1.); +#17957 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17958 = PLANE('',#17959); +#17959 = AXIS2_PLACEMENT_3D('',#17960,#17961,#17962); +#17960 = CARTESIAN_POINT('',(-2.476022294864,0.84,0.454762084394)); +#17961 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17962 = DIRECTION('',(0.,-0.,1.)); +#17963 = ADVANCED_FACE('',(#17964),#17975,.F.); +#17964 = FACE_BOUND('',#17965,.F.); +#17965 = EDGE_LOOP('',(#17966,#17967,#17968,#17969)); +#17966 = ORIENTED_EDGE('',*,*,#16545,.T.); +#17967 = ORIENTED_EDGE('',*,*,#16977,.T.); +#17968 = ORIENTED_EDGE('',*,*,#17041,.F.); +#17969 = ORIENTED_EDGE('',*,*,#17970,.F.); +#17970 = EDGE_CURVE('',#16529,#17034,#17971,.T.); +#17971 = LINE('',#17972,#17973); +#17972 = CARTESIAN_POINT('',(-2.25,0.84,0.905)); +#17973 = VECTOR('',#17974,1.); +#17974 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17975 = PLANE('',#17976); +#17976 = AXIS2_PLACEMENT_3D('',#17977,#17978,#17979); +#17977 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17978 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17979 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17980 = ADVANCED_FACE('',(#17981),#18060,.F.); +#17981 = FACE_BOUND('',#17982,.F.); +#17982 = EDGE_LOOP('',(#17983,#17984,#17985,#17994,#18002,#18011,#18019, + #18027,#18035,#18044,#18052,#18059)); +#17983 = ORIENTED_EDGE('',*,*,#16537,.F.); +#17984 = ORIENTED_EDGE('',*,*,#16559,.T.); +#17985 = ORIENTED_EDGE('',*,*,#17986,.T.); +#17986 = EDGE_CURVE('',#16560,#17987,#17989,.T.); +#17987 = VERTEX_POINT('',#17988); +#17988 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#17989 = CIRCLE('',#17990,0.1); +#17990 = AXIS2_PLACEMENT_3D('',#17991,#17992,#17993); +#17991 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#17992 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17993 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17994 = ORIENTED_EDGE('',*,*,#17995,.T.); +#17995 = EDGE_CURVE('',#17987,#17996,#17998,.T.); +#17996 = VERTEX_POINT('',#17997); +#17997 = CARTESIAN_POINT('',(-2.404962786068,1.7,0.256169064923)); +#17998 = LINE('',#17999,#18000); +#17999 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#18000 = VECTOR('',#18001,1.); +#18001 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#18002 = ORIENTED_EDGE('',*,*,#18003,.T.); +#18003 = EDGE_CURVE('',#17996,#18004,#18006,.T.); +#18004 = VERTEX_POINT('',#18005); +#18005 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#18006 = CIRCLE('',#18007,0.31); +#18007 = AXIS2_PLACEMENT_3D('',#18008,#18009,#18010); +#18008 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#18009 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#18010 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#18011 = ORIENTED_EDGE('',*,*,#18012,.T.); +#18012 = EDGE_CURVE('',#18004,#18013,#18015,.T.); +#18013 = VERTEX_POINT('',#18014); +#18014 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#18015 = LINE('',#18016,#18017); +#18016 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#18017 = VECTOR('',#18018,1.); +#18018 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#18019 = ORIENTED_EDGE('',*,*,#18020,.T.); +#18020 = EDGE_CURVE('',#18013,#18021,#18023,.T.); +#18021 = VERTEX_POINT('',#18022); +#18022 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#18023 = LINE('',#18024,#18025); +#18024 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#18025 = VECTOR('',#18026,1.); +#18026 = DIRECTION('',(0.,0.,1.)); +#18027 = ORIENTED_EDGE('',*,*,#18028,.T.); +#18028 = EDGE_CURVE('',#18021,#18029,#18031,.T.); +#18029 = VERTEX_POINT('',#18030); +#18030 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.21)); +#18031 = LINE('',#18032,#18033); +#18032 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#18033 = VECTOR('',#18034,1.); +#18034 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#18035 = ORIENTED_EDGE('',*,*,#18036,.T.); +#18036 = EDGE_CURVE('',#18029,#18037,#18039,.T.); +#18037 = VERTEX_POINT('',#18038); +#18038 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#18039 = CIRCLE('',#18040,0.1); +#18040 = AXIS2_PLACEMENT_3D('',#18041,#18042,#18043); +#18041 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#18042 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#18043 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#18044 = ORIENTED_EDGE('',*,*,#18045,.T.); +#18045 = EDGE_CURVE('',#18037,#18046,#18048,.T.); +#18046 = VERTEX_POINT('',#18047); +#18047 = CARTESIAN_POINT('',(-2.555290403434,1.7,0.648830935077)); +#18048 = LINE('',#18049,#18050); +#18049 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#18050 = VECTOR('',#18051,1.); +#18051 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#18052 = ORIENTED_EDGE('',*,*,#18053,.T.); +#18053 = EDGE_CURVE('',#18046,#16947,#18054,.T.); +#18054 = CIRCLE('',#18055,0.31); +#18055 = AXIS2_PLACEMENT_3D('',#18056,#18057,#18058); +#18056 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#18057 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#18058 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#18059 = ORIENTED_EDGE('',*,*,#16946,.T.); +#18060 = PLANE('',#18061); +#18061 = AXIS2_PLACEMENT_3D('',#18062,#18063,#18064); +#18062 = CARTESIAN_POINT('',(-2.476022294864,1.7,0.454762084394)); +#18063 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#18064 = DIRECTION('',(0.,-0.,1.)); +#18065 = ADVANCED_FACE('',(#18066),#18085,.F.); +#18066 = FACE_BOUND('',#18067,.F.); +#18067 = EDGE_LOOP('',(#18068,#18069,#18078,#18084)); +#18068 = ORIENTED_EDGE('',*,*,#16576,.T.); +#18069 = ORIENTED_EDGE('',*,*,#18070,.T.); +#18070 = EDGE_CURVE('',#16569,#18071,#18073,.T.); +#18071 = VERTEX_POINT('',#18072); +#18072 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.612364817767)); +#18073 = CIRCLE('',#18074,0.1); +#18074 = AXIS2_PLACEMENT_3D('',#18075,#18076,#18077); +#18075 = CARTESIAN_POINT('',(-2.25,2.11,0.595)); +#18076 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#18077 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#18078 = ORIENTED_EDGE('',*,*,#18079,.F.); +#18079 = EDGE_CURVE('',#17987,#18071,#18080,.T.); +#18080 = LINE('',#18081,#18082); +#18081 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#18082 = VECTOR('',#18083,1.); +#18083 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#18084 = ORIENTED_EDGE('',*,*,#17986,.F.); +#18085 = CYLINDRICAL_SURFACE('',#18086,0.1); +#18086 = AXIS2_PLACEMENT_3D('',#18087,#18088,#18089); +#18087 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#18088 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#18089 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#18090 = ADVANCED_FACE('',(#18091),#18162,.T.); +#18091 = FACE_BOUND('',#18092,.T.); +#18092 = EDGE_LOOP('',(#18093,#18094,#18095,#18096,#18104,#18113,#18121, + #18129,#18137,#18146,#18154,#18161)); +#18093 = ORIENTED_EDGE('',*,*,#16590,.F.); +#18094 = ORIENTED_EDGE('',*,*,#16568,.T.); +#18095 = ORIENTED_EDGE('',*,*,#18070,.T.); +#18096 = ORIENTED_EDGE('',*,*,#18097,.T.); +#18097 = EDGE_CURVE('',#18071,#18098,#18100,.T.); +#18098 = VERTEX_POINT('',#18099); +#18099 = CARTESIAN_POINT('',(-2.404962786068,2.11,0.256169064923)); +#18100 = LINE('',#18101,#18102); +#18101 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.612364817767)); +#18102 = VECTOR('',#18103,1.); +#18103 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#18104 = ORIENTED_EDGE('',*,*,#18105,.T.); +#18105 = EDGE_CURVE('',#18098,#18106,#18108,.T.); +#18106 = VERTEX_POINT('',#18107); +#18107 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.)); +#18108 = CIRCLE('',#18109,0.31); +#18109 = AXIS2_PLACEMENT_3D('',#18110,#18111,#18112); +#18110 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.31)); +#18111 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#18112 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#18113 = ORIENTED_EDGE('',*,*,#18114,.T.); +#18114 = EDGE_CURVE('',#18106,#18115,#18117,.T.); +#18115 = VERTEX_POINT('',#18116); +#18116 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#18117 = LINE('',#18118,#18119); +#18118 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.)); +#18119 = VECTOR('',#18120,1.); +#18120 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#18121 = ORIENTED_EDGE('',*,*,#18122,.T.); +#18122 = EDGE_CURVE('',#18115,#18123,#18125,.T.); +#18123 = VERTEX_POINT('',#18124); +#18124 = CARTESIAN_POINT('',(-3.,2.11,0.21)); +#18125 = LINE('',#18126,#18127); +#18126 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#18127 = VECTOR('',#18128,1.); +#18128 = DIRECTION('',(0.,0.,1.)); +#18129 = ORIENTED_EDGE('',*,*,#18130,.T.); +#18130 = EDGE_CURVE('',#18123,#18131,#18133,.T.); +#18131 = VERTEX_POINT('',#18132); +#18132 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.21)); +#18133 = LINE('',#18134,#18135); +#18134 = CARTESIAN_POINT('',(-3.,2.11,0.21)); +#18135 = VECTOR('',#18136,1.); +#18136 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#18137 = ORIENTED_EDGE('',*,*,#18138,.T.); +#18138 = EDGE_CURVE('',#18131,#18139,#18141,.T.); +#18139 = VERTEX_POINT('',#18140); +#18140 = CARTESIAN_POINT('',(-2.611772414201,2.11,0.292635182233)); +#18141 = CIRCLE('',#18142,0.1); +#18142 = AXIS2_PLACEMENT_3D('',#18143,#18144,#18145); +#18143 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.31)); +#18144 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#18145 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#18146 = ORIENTED_EDGE('',*,*,#18147,.T.); +#18147 = EDGE_CURVE('',#18139,#18148,#18150,.T.); +#18148 = VERTEX_POINT('',#18149); +#18149 = CARTESIAN_POINT('',(-2.555290403434,2.11,0.648830935077)); +#18150 = LINE('',#18151,#18152); +#18151 = CARTESIAN_POINT('',(-2.611772414201,2.11,0.292635182233)); +#18152 = VECTOR('',#18153,1.); +#18153 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#18154 = ORIENTED_EDGE('',*,*,#18155,.T.); +#18155 = EDGE_CURVE('',#18148,#16955,#18156,.T.); +#18156 = CIRCLE('',#18157,0.31); +#18157 = AXIS2_PLACEMENT_3D('',#18158,#18159,#18160); +#18158 = CARTESIAN_POINT('',(-2.25,2.11,0.595)); +#18159 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#18160 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#18161 = ORIENTED_EDGE('',*,*,#16962,.T.); +#18162 = PLANE('',#18163); +#18163 = AXIS2_PLACEMENT_3D('',#18164,#18165,#18166); +#18164 = CARTESIAN_POINT('',(-2.476022294864,2.11,0.454762084394)); +#18165 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#18166 = DIRECTION('',(0.,-0.,1.)); +#18167 = ADVANCED_FACE('',(#18168),#18247,.F.); +#18168 = FACE_BOUND('',#18169,.F.); +#18169 = EDGE_LOOP('',(#18170,#18171,#18172,#18181,#18189,#18198,#18206, + #18214,#18222,#18231,#18239,#18246)); +#18170 = ORIENTED_EDGE('',*,*,#16609,.F.); +#18171 = ORIENTED_EDGE('',*,*,#16624,.T.); +#18172 = ORIENTED_EDGE('',*,*,#18173,.T.); +#18173 = EDGE_CURVE('',#16625,#18174,#18176,.T.); +#18174 = VERTEX_POINT('',#18175); +#18175 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#18176 = CIRCLE('',#18177,0.1); +#18177 = AXIS2_PLACEMENT_3D('',#18178,#18179,#18180); +#18178 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#18179 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18180 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18181 = ORIENTED_EDGE('',*,*,#18182,.T.); +#18182 = EDGE_CURVE('',#18174,#18183,#18185,.T.); +#18183 = VERTEX_POINT('',#18184); +#18184 = CARTESIAN_POINT('',(2.404962786068,2.11,0.256169064923)); +#18185 = LINE('',#18186,#18187); +#18186 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#18187 = VECTOR('',#18188,1.); +#18188 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18189 = ORIENTED_EDGE('',*,*,#18190,.T.); +#18190 = EDGE_CURVE('',#18183,#18191,#18193,.T.); +#18191 = VERTEX_POINT('',#18192); +#18192 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#18193 = CIRCLE('',#18194,0.31); +#18194 = AXIS2_PLACEMENT_3D('',#18195,#18196,#18197); +#18195 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#18196 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18197 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18198 = ORIENTED_EDGE('',*,*,#18199,.T.); +#18199 = EDGE_CURVE('',#18191,#18200,#18202,.T.); +#18200 = VERTEX_POINT('',#18201); +#18201 = CARTESIAN_POINT('',(3.,2.11,0.)); +#18202 = LINE('',#18203,#18204); +#18203 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#18204 = VECTOR('',#18205,1.); +#18205 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18206 = ORIENTED_EDGE('',*,*,#18207,.T.); +#18207 = EDGE_CURVE('',#18200,#18208,#18210,.T.); +#18208 = VERTEX_POINT('',#18209); +#18209 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#18210 = LINE('',#18211,#18212); +#18211 = CARTESIAN_POINT('',(3.,2.11,0.)); +#18212 = VECTOR('',#18213,1.); +#18213 = DIRECTION('',(0.,0.,1.)); +#18214 = ORIENTED_EDGE('',*,*,#18215,.T.); +#18215 = EDGE_CURVE('',#18208,#18216,#18218,.T.); +#18216 = VERTEX_POINT('',#18217); +#18217 = CARTESIAN_POINT('',(2.710253189502,2.11,0.21)); +#18218 = LINE('',#18219,#18220); +#18219 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#18220 = VECTOR('',#18221,1.); +#18221 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18222 = ORIENTED_EDGE('',*,*,#18223,.T.); +#18223 = EDGE_CURVE('',#18216,#18224,#18226,.T.); +#18224 = VERTEX_POINT('',#18225); +#18225 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#18226 = CIRCLE('',#18227,0.1); +#18227 = AXIS2_PLACEMENT_3D('',#18228,#18229,#18230); +#18228 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#18229 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18230 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18231 = ORIENTED_EDGE('',*,*,#18232,.T.); +#18232 = EDGE_CURVE('',#18224,#18233,#18235,.T.); +#18233 = VERTEX_POINT('',#18234); +#18234 = CARTESIAN_POINT('',(2.555290403434,2.11,0.648830935077)); +#18235 = LINE('',#18236,#18237); +#18236 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#18237 = VECTOR('',#18238,1.); +#18238 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18239 = ORIENTED_EDGE('',*,*,#18240,.T.); +#18240 = EDGE_CURVE('',#18233,#17234,#18241,.T.); +#18241 = CIRCLE('',#18242,0.31); +#18242 = AXIS2_PLACEMENT_3D('',#18243,#18244,#18245); +#18243 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#18244 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18245 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18246 = ORIENTED_EDGE('',*,*,#17233,.T.); +#18247 = PLANE('',#18248); +#18248 = AXIS2_PLACEMENT_3D('',#18249,#18250,#18251); +#18249 = CARTESIAN_POINT('',(2.476022294864,2.11,0.454762084394)); +#18250 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18251 = DIRECTION('',(0.,0.,1.)); +#18252 = ADVANCED_FACE('',(#18253),#18272,.F.); +#18253 = FACE_BOUND('',#18254,.F.); +#18254 = EDGE_LOOP('',(#18255,#18256,#18265,#18271)); +#18255 = ORIENTED_EDGE('',*,*,#16641,.T.); +#18256 = ORIENTED_EDGE('',*,*,#18257,.T.); +#18257 = EDGE_CURVE('',#16634,#18258,#18260,.T.); +#18258 = VERTEX_POINT('',#18259); +#18259 = CARTESIAN_POINT('',(2.348480775301,1.7,0.612364817767)); +#18260 = CIRCLE('',#18261,0.1); +#18261 = AXIS2_PLACEMENT_3D('',#18262,#18263,#18264); +#18262 = CARTESIAN_POINT('',(2.25,1.7,0.595)); +#18263 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18264 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18265 = ORIENTED_EDGE('',*,*,#18266,.F.); +#18266 = EDGE_CURVE('',#18174,#18258,#18267,.T.); +#18267 = LINE('',#18268,#18269); +#18268 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#18269 = VECTOR('',#18270,1.); +#18270 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18271 = ORIENTED_EDGE('',*,*,#18173,.F.); +#18272 = CYLINDRICAL_SURFACE('',#18273,0.1); +#18273 = AXIS2_PLACEMENT_3D('',#18274,#18275,#18276); +#18274 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#18275 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18276 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18277 = ADVANCED_FACE('',(#18278),#18349,.T.); +#18278 = FACE_BOUND('',#18279,.T.); +#18279 = EDGE_LOOP('',(#18280,#18281,#18282,#18283,#18291,#18300,#18308, + #18316,#18324,#18333,#18341,#18348)); +#18280 = ORIENTED_EDGE('',*,*,#16655,.F.); +#18281 = ORIENTED_EDGE('',*,*,#16633,.T.); +#18282 = ORIENTED_EDGE('',*,*,#18257,.T.); +#18283 = ORIENTED_EDGE('',*,*,#18284,.T.); +#18284 = EDGE_CURVE('',#18258,#18285,#18287,.T.); +#18285 = VERTEX_POINT('',#18286); +#18286 = CARTESIAN_POINT('',(2.404962786068,1.7,0.256169064923)); +#18287 = LINE('',#18288,#18289); +#18288 = CARTESIAN_POINT('',(2.348480775301,1.7,0.612364817767)); +#18289 = VECTOR('',#18290,1.); +#18290 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18291 = ORIENTED_EDGE('',*,*,#18292,.T.); +#18292 = EDGE_CURVE('',#18285,#18293,#18295,.T.); +#18293 = VERTEX_POINT('',#18294); +#18294 = CARTESIAN_POINT('',(2.710253189502,1.7,0.)); +#18295 = CIRCLE('',#18296,0.31); +#18296 = AXIS2_PLACEMENT_3D('',#18297,#18298,#18299); +#18297 = CARTESIAN_POINT('',(2.710253189502,1.7,0.31)); +#18298 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18299 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18300 = ORIENTED_EDGE('',*,*,#18301,.T.); +#18301 = EDGE_CURVE('',#18293,#18302,#18304,.T.); +#18302 = VERTEX_POINT('',#18303); +#18303 = CARTESIAN_POINT('',(3.,1.7,0.)); +#18304 = LINE('',#18305,#18306); +#18305 = CARTESIAN_POINT('',(2.710253189502,1.7,0.)); +#18306 = VECTOR('',#18307,1.); +#18307 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18308 = ORIENTED_EDGE('',*,*,#18309,.T.); +#18309 = EDGE_CURVE('',#18302,#18310,#18312,.T.); +#18310 = VERTEX_POINT('',#18311); +#18311 = CARTESIAN_POINT('',(3.,1.7,0.21)); +#18312 = LINE('',#18313,#18314); +#18313 = CARTESIAN_POINT('',(3.,1.7,0.)); +#18314 = VECTOR('',#18315,1.); +#18315 = DIRECTION('',(0.,0.,1.)); +#18316 = ORIENTED_EDGE('',*,*,#18317,.T.); +#18317 = EDGE_CURVE('',#18310,#18318,#18320,.T.); +#18318 = VERTEX_POINT('',#18319); +#18319 = CARTESIAN_POINT('',(2.710253189502,1.7,0.21)); +#18320 = LINE('',#18321,#18322); +#18321 = CARTESIAN_POINT('',(3.,1.7,0.21)); +#18322 = VECTOR('',#18323,1.); +#18323 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18324 = ORIENTED_EDGE('',*,*,#18325,.T.); +#18325 = EDGE_CURVE('',#18318,#18326,#18328,.T.); +#18326 = VERTEX_POINT('',#18327); +#18327 = CARTESIAN_POINT('',(2.611772414201,1.7,0.292635182233)); +#18328 = CIRCLE('',#18329,0.1); +#18329 = AXIS2_PLACEMENT_3D('',#18330,#18331,#18332); +#18330 = CARTESIAN_POINT('',(2.710253189502,1.7,0.31)); +#18331 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18332 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18333 = ORIENTED_EDGE('',*,*,#18334,.T.); +#18334 = EDGE_CURVE('',#18326,#18335,#18337,.T.); +#18335 = VERTEX_POINT('',#18336); +#18336 = CARTESIAN_POINT('',(2.555290403434,1.7,0.648830935077)); +#18337 = LINE('',#18338,#18339); +#18338 = CARTESIAN_POINT('',(2.611772414201,1.7,0.292635182233)); +#18339 = VECTOR('',#18340,1.); +#18340 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18341 = ORIENTED_EDGE('',*,*,#18342,.T.); +#18342 = EDGE_CURVE('',#18335,#17242,#18343,.T.); +#18343 = CIRCLE('',#18344,0.31); +#18344 = AXIS2_PLACEMENT_3D('',#18345,#18346,#18347); +#18345 = CARTESIAN_POINT('',(2.25,1.7,0.595)); +#18346 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18347 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18348 = ORIENTED_EDGE('',*,*,#17249,.T.); +#18349 = PLANE('',#18350); +#18350 = AXIS2_PLACEMENT_3D('',#18351,#18352,#18353); +#18351 = CARTESIAN_POINT('',(2.476022294864,1.7,0.454762084394)); +#18352 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18353 = DIRECTION('',(0.,0.,1.)); +#18354 = ADVANCED_FACE('',(#18355),#18366,.F.); +#18355 = FACE_BOUND('',#18356,.F.); +#18356 = EDGE_LOOP('',(#18357,#18358,#18359,#18365)); +#18357 = ORIENTED_EDGE('',*,*,#17255,.F.); +#18358 = ORIENTED_EDGE('',*,*,#16672,.T.); +#18359 = ORIENTED_EDGE('',*,*,#18360,.T.); +#18360 = EDGE_CURVE('',#16665,#17156,#18361,.T.); +#18361 = LINE('',#18362,#18363); +#18362 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#18363 = VECTOR('',#18364,1.); +#18364 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18365 = ORIENTED_EDGE('',*,*,#17155,.F.); +#18366 = PLANE('',#18367); +#18367 = AXIS2_PLACEMENT_3D('',#18368,#18369,#18370); +#18368 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#18369 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#18370 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#18371 = ADVANCED_FACE('',(#18372),#18458,.F.); +#18372 = FACE_BOUND('',#18373,.F.); +#18373 = EDGE_LOOP('',(#18374,#18375,#18376,#18385,#18393,#18402,#18410, + #18418,#18426,#18435,#18443,#18452)); +#18374 = ORIENTED_EDGE('',*,*,#16664,.F.); +#18375 = ORIENTED_EDGE('',*,*,#16686,.T.); +#18376 = ORIENTED_EDGE('',*,*,#18377,.T.); +#18377 = EDGE_CURVE('',#16687,#18378,#18380,.T.); +#18378 = VERTEX_POINT('',#18379); +#18379 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#18380 = CIRCLE('',#18381,0.1); +#18381 = AXIS2_PLACEMENT_3D('',#18382,#18383,#18384); +#18382 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#18383 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18384 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18385 = ORIENTED_EDGE('',*,*,#18386,.T.); +#18386 = EDGE_CURVE('',#18378,#18387,#18389,.T.); +#18387 = VERTEX_POINT('',#18388); +#18388 = CARTESIAN_POINT('',(2.404962786068,0.84,0.256169064923)); +#18389 = LINE('',#18390,#18391); +#18390 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#18391 = VECTOR('',#18392,1.); +#18392 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18393 = ORIENTED_EDGE('',*,*,#18394,.T.); +#18394 = EDGE_CURVE('',#18387,#18395,#18397,.T.); +#18395 = VERTEX_POINT('',#18396); +#18396 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#18397 = CIRCLE('',#18398,0.31); +#18398 = AXIS2_PLACEMENT_3D('',#18399,#18400,#18401); +#18399 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#18400 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18401 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18402 = ORIENTED_EDGE('',*,*,#18403,.T.); +#18403 = EDGE_CURVE('',#18395,#18404,#18406,.T.); +#18404 = VERTEX_POINT('',#18405); +#18405 = CARTESIAN_POINT('',(3.,0.84,0.)); +#18406 = LINE('',#18407,#18408); +#18407 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#18408 = VECTOR('',#18409,1.); +#18409 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18410 = ORIENTED_EDGE('',*,*,#18411,.T.); +#18411 = EDGE_CURVE('',#18404,#18412,#18414,.T.); +#18412 = VERTEX_POINT('',#18413); +#18413 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#18414 = LINE('',#18415,#18416); +#18415 = CARTESIAN_POINT('',(3.,0.84,0.)); +#18416 = VECTOR('',#18417,1.); +#18417 = DIRECTION('',(0.,0.,1.)); +#18418 = ORIENTED_EDGE('',*,*,#18419,.T.); +#18419 = EDGE_CURVE('',#18412,#18420,#18422,.T.); +#18420 = VERTEX_POINT('',#18421); +#18421 = CARTESIAN_POINT('',(2.710253189502,0.84,0.21)); +#18422 = LINE('',#18423,#18424); +#18423 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#18424 = VECTOR('',#18425,1.); +#18425 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18426 = ORIENTED_EDGE('',*,*,#18427,.T.); +#18427 = EDGE_CURVE('',#18420,#18428,#18430,.T.); +#18428 = VERTEX_POINT('',#18429); +#18429 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#18430 = CIRCLE('',#18431,0.1); +#18431 = AXIS2_PLACEMENT_3D('',#18432,#18433,#18434); +#18432 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#18433 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18434 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18435 = ORIENTED_EDGE('',*,*,#18436,.T.); +#18436 = EDGE_CURVE('',#18428,#18437,#18439,.T.); +#18437 = VERTEX_POINT('',#18438); +#18438 = CARTESIAN_POINT('',(2.555290403434,0.84,0.648830935077)); +#18439 = LINE('',#18440,#18441); +#18440 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#18441 = VECTOR('',#18442,1.); +#18442 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18443 = ORIENTED_EDGE('',*,*,#18444,.T.); +#18444 = EDGE_CURVE('',#18437,#18445,#18447,.T.); +#18445 = VERTEX_POINT('',#18446); +#18446 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#18447 = CIRCLE('',#18448,0.31); +#18448 = AXIS2_PLACEMENT_3D('',#18449,#18450,#18451); +#18449 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#18450 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18451 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18452 = ORIENTED_EDGE('',*,*,#18453,.T.); +#18453 = EDGE_CURVE('',#18445,#16665,#18454,.T.); +#18454 = LINE('',#18455,#18456); +#18455 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#18456 = VECTOR('',#18457,1.); +#18457 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18458 = PLANE('',#18459); +#18459 = AXIS2_PLACEMENT_3D('',#18460,#18461,#18462); +#18460 = CARTESIAN_POINT('',(2.476022294864,0.84,0.454762084394)); +#18461 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18462 = DIRECTION('',(0.,0.,1.)); +#18463 = ADVANCED_FACE('',(#18464),#18483,.F.); +#18464 = FACE_BOUND('',#18465,.F.); +#18465 = EDGE_LOOP('',(#18466,#18467,#18476,#18482)); +#18466 = ORIENTED_EDGE('',*,*,#16703,.T.); +#18467 = ORIENTED_EDGE('',*,*,#18468,.T.); +#18468 = EDGE_CURVE('',#16696,#18469,#18471,.T.); +#18469 = VERTEX_POINT('',#18470); +#18470 = CARTESIAN_POINT('',(2.348480775301,0.43,0.612364817767)); +#18471 = CIRCLE('',#18472,0.1); +#18472 = AXIS2_PLACEMENT_3D('',#18473,#18474,#18475); +#18473 = CARTESIAN_POINT('',(2.25,0.43,0.595)); +#18474 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18475 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18476 = ORIENTED_EDGE('',*,*,#18477,.F.); +#18477 = EDGE_CURVE('',#18378,#18469,#18478,.T.); +#18478 = LINE('',#18479,#18480); +#18479 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#18480 = VECTOR('',#18481,1.); +#18481 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18482 = ORIENTED_EDGE('',*,*,#18377,.F.); +#18483 = CYLINDRICAL_SURFACE('',#18484,0.1); +#18484 = AXIS2_PLACEMENT_3D('',#18485,#18486,#18487); +#18485 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#18486 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18487 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18488 = ADVANCED_FACE('',(#18489),#18567,.T.); +#18489 = FACE_BOUND('',#18490,.T.); +#18490 = EDGE_LOOP('',(#18491,#18492,#18493,#18494,#18502,#18511,#18519, + #18527,#18535,#18544,#18552,#18561)); +#18491 = ORIENTED_EDGE('',*,*,#16717,.F.); +#18492 = ORIENTED_EDGE('',*,*,#16695,.T.); +#18493 = ORIENTED_EDGE('',*,*,#18468,.T.); +#18494 = ORIENTED_EDGE('',*,*,#18495,.T.); +#18495 = EDGE_CURVE('',#18469,#18496,#18498,.T.); +#18496 = VERTEX_POINT('',#18497); +#18497 = CARTESIAN_POINT('',(2.404962786068,0.43,0.256169064923)); +#18498 = LINE('',#18499,#18500); +#18499 = CARTESIAN_POINT('',(2.348480775301,0.43,0.612364817767)); +#18500 = VECTOR('',#18501,1.); +#18501 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18502 = ORIENTED_EDGE('',*,*,#18503,.T.); +#18503 = EDGE_CURVE('',#18496,#18504,#18506,.T.); +#18504 = VERTEX_POINT('',#18505); +#18505 = CARTESIAN_POINT('',(2.710253189502,0.43,0.)); +#18506 = CIRCLE('',#18507,0.31); +#18507 = AXIS2_PLACEMENT_3D('',#18508,#18509,#18510); +#18508 = CARTESIAN_POINT('',(2.710253189502,0.43,0.31)); +#18509 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18510 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18511 = ORIENTED_EDGE('',*,*,#18512,.T.); +#18512 = EDGE_CURVE('',#18504,#18513,#18515,.T.); +#18513 = VERTEX_POINT('',#18514); +#18514 = CARTESIAN_POINT('',(3.,0.43,0.)); +#18515 = LINE('',#18516,#18517); +#18516 = CARTESIAN_POINT('',(2.710253189502,0.43,0.)); +#18517 = VECTOR('',#18518,1.); +#18518 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18519 = ORIENTED_EDGE('',*,*,#18520,.T.); +#18520 = EDGE_CURVE('',#18513,#18521,#18523,.T.); +#18521 = VERTEX_POINT('',#18522); +#18522 = CARTESIAN_POINT('',(3.,0.43,0.21)); +#18523 = LINE('',#18524,#18525); +#18524 = CARTESIAN_POINT('',(3.,0.43,0.)); +#18525 = VECTOR('',#18526,1.); +#18526 = DIRECTION('',(0.,0.,1.)); +#18527 = ORIENTED_EDGE('',*,*,#18528,.T.); +#18528 = EDGE_CURVE('',#18521,#18529,#18531,.T.); +#18529 = VERTEX_POINT('',#18530); +#18530 = CARTESIAN_POINT('',(2.710253189502,0.43,0.21)); +#18531 = LINE('',#18532,#18533); +#18532 = CARTESIAN_POINT('',(3.,0.43,0.21)); +#18533 = VECTOR('',#18534,1.); +#18534 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18535 = ORIENTED_EDGE('',*,*,#18536,.T.); +#18536 = EDGE_CURVE('',#18529,#18537,#18539,.T.); +#18537 = VERTEX_POINT('',#18538); +#18538 = CARTESIAN_POINT('',(2.611772414201,0.43,0.292635182233)); +#18539 = CIRCLE('',#18540,0.1); +#18540 = AXIS2_PLACEMENT_3D('',#18541,#18542,#18543); +#18541 = CARTESIAN_POINT('',(2.710253189502,0.43,0.31)); +#18542 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18543 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18544 = ORIENTED_EDGE('',*,*,#18545,.T.); +#18545 = EDGE_CURVE('',#18537,#18546,#18548,.T.); +#18546 = VERTEX_POINT('',#18547); +#18547 = CARTESIAN_POINT('',(2.555290403434,0.43,0.648830935077)); +#18548 = LINE('',#18549,#18550); +#18549 = CARTESIAN_POINT('',(2.611772414201,0.43,0.292635182233)); +#18550 = VECTOR('',#18551,1.); +#18551 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18552 = ORIENTED_EDGE('',*,*,#18553,.T.); +#18553 = EDGE_CURVE('',#18546,#18554,#18556,.T.); +#18554 = VERTEX_POINT('',#18555); +#18555 = CARTESIAN_POINT('',(2.25,0.43,0.905)); +#18556 = CIRCLE('',#18557,0.31); +#18557 = AXIS2_PLACEMENT_3D('',#18558,#18559,#18560); +#18558 = CARTESIAN_POINT('',(2.25,0.43,0.595)); +#18559 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18560 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18561 = ORIENTED_EDGE('',*,*,#18562,.T.); +#18562 = EDGE_CURVE('',#18554,#16718,#18563,.T.); +#18563 = LINE('',#18564,#18565); +#18564 = CARTESIAN_POINT('',(2.25,0.43,0.905)); +#18565 = VECTOR('',#18566,1.); +#18566 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18567 = PLANE('',#18568); +#18568 = AXIS2_PLACEMENT_3D('',#18569,#18570,#18571); +#18569 = CARTESIAN_POINT('',(2.476022294864,0.43,0.454762084394)); +#18570 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18571 = DIRECTION('',(0.,0.,1.)); +#18572 = ADVANCED_FACE('',(#18573),#18589,.F.); +#18573 = FACE_BOUND('',#18574,.F.); +#18574 = EDGE_LOOP('',(#18575,#18581,#18582,#18588)); +#18575 = ORIENTED_EDGE('',*,*,#18576,.F.); +#18576 = EDGE_CURVE('',#16718,#17164,#18577,.T.); +#18577 = LINE('',#18578,#18579); +#18578 = CARTESIAN_POINT('',(2.25,0.43,0.905)); +#18579 = VECTOR('',#18580,1.); +#18580 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18581 = ORIENTED_EDGE('',*,*,#16734,.T.); +#18582 = ORIENTED_EDGE('',*,*,#18583,.T.); +#18583 = EDGE_CURVE('',#16727,#17172,#18584,.T.); +#18584 = LINE('',#18585,#18586); +#18585 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#18586 = VECTOR('',#18587,1.); +#18587 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18588 = ORIENTED_EDGE('',*,*,#17171,.F.); +#18589 = PLANE('',#18590); +#18590 = AXIS2_PLACEMENT_3D('',#18591,#18592,#18593); +#18591 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#18592 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#18593 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#18594 = ADVANCED_FACE('',(#18595),#18681,.F.); +#18595 = FACE_BOUND('',#18596,.F.); +#18596 = EDGE_LOOP('',(#18597,#18598,#18599,#18608,#18616,#18625,#18633, + #18641,#18649,#18658,#18666,#18675)); +#18597 = ORIENTED_EDGE('',*,*,#16726,.F.); +#18598 = ORIENTED_EDGE('',*,*,#16748,.T.); +#18599 = ORIENTED_EDGE('',*,*,#18600,.T.); +#18600 = EDGE_CURVE('',#16749,#18601,#18603,.T.); +#18601 = VERTEX_POINT('',#18602); +#18602 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#18603 = CIRCLE('',#18604,0.1); +#18604 = AXIS2_PLACEMENT_3D('',#18605,#18606,#18607); +#18605 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#18606 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18607 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18608 = ORIENTED_EDGE('',*,*,#18609,.T.); +#18609 = EDGE_CURVE('',#18601,#18610,#18612,.T.); +#18610 = VERTEX_POINT('',#18611); +#18611 = CARTESIAN_POINT('',(2.404962786068,-0.43,0.256169064923)); +#18612 = LINE('',#18613,#18614); +#18613 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#18614 = VECTOR('',#18615,1.); +#18615 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18616 = ORIENTED_EDGE('',*,*,#18617,.T.); +#18617 = EDGE_CURVE('',#18610,#18618,#18620,.T.); +#18618 = VERTEX_POINT('',#18619); +#18619 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#18620 = CIRCLE('',#18621,0.31); +#18621 = AXIS2_PLACEMENT_3D('',#18622,#18623,#18624); +#18622 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#18623 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18624 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18625 = ORIENTED_EDGE('',*,*,#18626,.T.); +#18626 = EDGE_CURVE('',#18618,#18627,#18629,.T.); +#18627 = VERTEX_POINT('',#18628); +#18628 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#18629 = LINE('',#18630,#18631); +#18630 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#18631 = VECTOR('',#18632,1.); +#18632 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18633 = ORIENTED_EDGE('',*,*,#18634,.T.); +#18634 = EDGE_CURVE('',#18627,#18635,#18637,.T.); +#18635 = VERTEX_POINT('',#18636); +#18636 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#18637 = LINE('',#18638,#18639); +#18638 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#18639 = VECTOR('',#18640,1.); +#18640 = DIRECTION('',(0.,0.,1.)); +#18641 = ORIENTED_EDGE('',*,*,#18642,.T.); +#18642 = EDGE_CURVE('',#18635,#18643,#18645,.T.); +#18643 = VERTEX_POINT('',#18644); +#18644 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.21)); +#18645 = LINE('',#18646,#18647); +#18646 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#18647 = VECTOR('',#18648,1.); +#18648 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18649 = ORIENTED_EDGE('',*,*,#18650,.T.); +#18650 = EDGE_CURVE('',#18643,#18651,#18653,.T.); +#18651 = VERTEX_POINT('',#18652); +#18652 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#18653 = CIRCLE('',#18654,0.1); +#18654 = AXIS2_PLACEMENT_3D('',#18655,#18656,#18657); +#18655 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#18656 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18657 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18658 = ORIENTED_EDGE('',*,*,#18659,.T.); +#18659 = EDGE_CURVE('',#18651,#18660,#18662,.T.); +#18660 = VERTEX_POINT('',#18661); +#18661 = CARTESIAN_POINT('',(2.555290403434,-0.43,0.648830935077)); +#18662 = LINE('',#18663,#18664); +#18663 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#18664 = VECTOR('',#18665,1.); +#18665 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18666 = ORIENTED_EDGE('',*,*,#18667,.T.); +#18667 = EDGE_CURVE('',#18660,#18668,#18670,.T.); +#18668 = VERTEX_POINT('',#18669); +#18669 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#18670 = CIRCLE('',#18671,0.31); +#18671 = AXIS2_PLACEMENT_3D('',#18672,#18673,#18674); +#18672 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#18673 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18674 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18675 = ORIENTED_EDGE('',*,*,#18676,.T.); +#18676 = EDGE_CURVE('',#18668,#16727,#18677,.T.); +#18677 = LINE('',#18678,#18679); +#18678 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#18679 = VECTOR('',#18680,1.); +#18680 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18681 = PLANE('',#18682); +#18682 = AXIS2_PLACEMENT_3D('',#18683,#18684,#18685); +#18683 = CARTESIAN_POINT('',(2.476022294864,-0.43,0.454762084394)); +#18684 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18685 = DIRECTION('',(0.,0.,1.)); +#18686 = ADVANCED_FACE('',(#18687),#18706,.F.); +#18687 = FACE_BOUND('',#18688,.F.); +#18688 = EDGE_LOOP('',(#18689,#18690,#18699,#18705)); +#18689 = ORIENTED_EDGE('',*,*,#16765,.T.); +#18690 = ORIENTED_EDGE('',*,*,#18691,.T.); +#18691 = EDGE_CURVE('',#16758,#18692,#18694,.T.); +#18692 = VERTEX_POINT('',#18693); +#18693 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.612364817767)); +#18694 = CIRCLE('',#18695,0.1); +#18695 = AXIS2_PLACEMENT_3D('',#18696,#18697,#18698); +#18696 = CARTESIAN_POINT('',(2.25,-0.84,0.595)); +#18697 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18698 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18699 = ORIENTED_EDGE('',*,*,#18700,.F.); +#18700 = EDGE_CURVE('',#18601,#18692,#18701,.T.); +#18701 = LINE('',#18702,#18703); +#18702 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#18703 = VECTOR('',#18704,1.); +#18704 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18705 = ORIENTED_EDGE('',*,*,#18600,.F.); +#18706 = CYLINDRICAL_SURFACE('',#18707,0.1); +#18707 = AXIS2_PLACEMENT_3D('',#18708,#18709,#18710); +#18708 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#18709 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18710 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18711 = ADVANCED_FACE('',(#18712),#18790,.T.); +#18712 = FACE_BOUND('',#18713,.T.); +#18713 = EDGE_LOOP('',(#18714,#18715,#18716,#18717,#18725,#18734,#18742, + #18750,#18758,#18767,#18775,#18784)); +#18714 = ORIENTED_EDGE('',*,*,#16779,.F.); +#18715 = ORIENTED_EDGE('',*,*,#16757,.T.); +#18716 = ORIENTED_EDGE('',*,*,#18691,.T.); +#18717 = ORIENTED_EDGE('',*,*,#18718,.T.); +#18718 = EDGE_CURVE('',#18692,#18719,#18721,.T.); +#18719 = VERTEX_POINT('',#18720); +#18720 = CARTESIAN_POINT('',(2.404962786068,-0.84,0.256169064923)); +#18721 = LINE('',#18722,#18723); +#18722 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.612364817767)); +#18723 = VECTOR('',#18724,1.); +#18724 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18725 = ORIENTED_EDGE('',*,*,#18726,.T.); +#18726 = EDGE_CURVE('',#18719,#18727,#18729,.T.); +#18727 = VERTEX_POINT('',#18728); +#18728 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.)); +#18729 = CIRCLE('',#18730,0.31); +#18730 = AXIS2_PLACEMENT_3D('',#18731,#18732,#18733); +#18731 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.31)); +#18732 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18733 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18734 = ORIENTED_EDGE('',*,*,#18735,.T.); +#18735 = EDGE_CURVE('',#18727,#18736,#18738,.T.); +#18736 = VERTEX_POINT('',#18737); +#18737 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#18738 = LINE('',#18739,#18740); +#18739 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.)); +#18740 = VECTOR('',#18741,1.); +#18741 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18742 = ORIENTED_EDGE('',*,*,#18743,.T.); +#18743 = EDGE_CURVE('',#18736,#18744,#18746,.T.); +#18744 = VERTEX_POINT('',#18745); +#18745 = CARTESIAN_POINT('',(3.,-0.84,0.21)); +#18746 = LINE('',#18747,#18748); +#18747 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#18748 = VECTOR('',#18749,1.); +#18749 = DIRECTION('',(0.,0.,1.)); +#18750 = ORIENTED_EDGE('',*,*,#18751,.T.); +#18751 = EDGE_CURVE('',#18744,#18752,#18754,.T.); +#18752 = VERTEX_POINT('',#18753); +#18753 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.21)); +#18754 = LINE('',#18755,#18756); +#18755 = CARTESIAN_POINT('',(3.,-0.84,0.21)); +#18756 = VECTOR('',#18757,1.); +#18757 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18758 = ORIENTED_EDGE('',*,*,#18759,.T.); +#18759 = EDGE_CURVE('',#18752,#18760,#18762,.T.); +#18760 = VERTEX_POINT('',#18761); +#18761 = CARTESIAN_POINT('',(2.611772414201,-0.84,0.292635182233)); +#18762 = CIRCLE('',#18763,0.1); +#18763 = AXIS2_PLACEMENT_3D('',#18764,#18765,#18766); +#18764 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.31)); +#18765 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18766 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18767 = ORIENTED_EDGE('',*,*,#18768,.T.); +#18768 = EDGE_CURVE('',#18760,#18769,#18771,.T.); +#18769 = VERTEX_POINT('',#18770); +#18770 = CARTESIAN_POINT('',(2.555290403434,-0.84,0.648830935077)); +#18771 = LINE('',#18772,#18773); +#18772 = CARTESIAN_POINT('',(2.611772414201,-0.84,0.292635182233)); +#18773 = VECTOR('',#18774,1.); +#18774 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18775 = ORIENTED_EDGE('',*,*,#18776,.T.); +#18776 = EDGE_CURVE('',#18769,#18777,#18779,.T.); +#18777 = VERTEX_POINT('',#18778); +#18778 = CARTESIAN_POINT('',(2.25,-0.84,0.905)); +#18779 = CIRCLE('',#18780,0.31); +#18780 = AXIS2_PLACEMENT_3D('',#18781,#18782,#18783); +#18781 = CARTESIAN_POINT('',(2.25,-0.84,0.595)); +#18782 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18783 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18784 = ORIENTED_EDGE('',*,*,#18785,.T.); +#18785 = EDGE_CURVE('',#18777,#16780,#18786,.T.); +#18786 = LINE('',#18787,#18788); +#18787 = CARTESIAN_POINT('',(2.25,-0.84,0.905)); +#18788 = VECTOR('',#18789,1.); +#18789 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18790 = PLANE('',#18791); +#18791 = AXIS2_PLACEMENT_3D('',#18792,#18793,#18794); +#18792 = CARTESIAN_POINT('',(2.476022294864,-0.84,0.454762084394)); +#18793 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18794 = DIRECTION('',(0.,0.,1.)); +#18795 = ADVANCED_FACE('',(#18796),#18812,.F.); +#18796 = FACE_BOUND('',#18797,.F.); +#18797 = EDGE_LOOP('',(#18798,#18804,#18805,#18811)); +#18798 = ORIENTED_EDGE('',*,*,#18799,.F.); +#18799 = EDGE_CURVE('',#16780,#17180,#18800,.T.); +#18800 = LINE('',#18801,#18802); +#18801 = CARTESIAN_POINT('',(2.25,-0.84,0.905)); +#18802 = VECTOR('',#18803,1.); +#18803 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18804 = ORIENTED_EDGE('',*,*,#16796,.T.); +#18805 = ORIENTED_EDGE('',*,*,#18806,.T.); +#18806 = EDGE_CURVE('',#16789,#17188,#18807,.T.); +#18807 = LINE('',#18808,#18809); +#18808 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#18809 = VECTOR('',#18810,1.); +#18810 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18811 = ORIENTED_EDGE('',*,*,#17187,.F.); +#18812 = PLANE('',#18813); +#18813 = AXIS2_PLACEMENT_3D('',#18814,#18815,#18816); +#18814 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#18815 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#18816 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#18817 = ADVANCED_FACE('',(#18818),#18904,.F.); +#18818 = FACE_BOUND('',#18819,.F.); +#18819 = EDGE_LOOP('',(#18820,#18821,#18822,#18831,#18839,#18848,#18856, + #18864,#18872,#18881,#18889,#18898)); +#18820 = ORIENTED_EDGE('',*,*,#16788,.F.); +#18821 = ORIENTED_EDGE('',*,*,#16810,.T.); +#18822 = ORIENTED_EDGE('',*,*,#18823,.T.); +#18823 = EDGE_CURVE('',#16811,#18824,#18826,.T.); +#18824 = VERTEX_POINT('',#18825); +#18825 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#18826 = CIRCLE('',#18827,0.1); +#18827 = AXIS2_PLACEMENT_3D('',#18828,#18829,#18830); +#18828 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#18829 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18830 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18831 = ORIENTED_EDGE('',*,*,#18832,.T.); +#18832 = EDGE_CURVE('',#18824,#18833,#18835,.T.); +#18833 = VERTEX_POINT('',#18834); +#18834 = CARTESIAN_POINT('',(2.404962786068,-1.7,0.256169064923)); +#18835 = LINE('',#18836,#18837); +#18836 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#18837 = VECTOR('',#18838,1.); +#18838 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18839 = ORIENTED_EDGE('',*,*,#18840,.T.); +#18840 = EDGE_CURVE('',#18833,#18841,#18843,.T.); +#18841 = VERTEX_POINT('',#18842); +#18842 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#18843 = CIRCLE('',#18844,0.31); +#18844 = AXIS2_PLACEMENT_3D('',#18845,#18846,#18847); +#18845 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#18846 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18847 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18848 = ORIENTED_EDGE('',*,*,#18849,.T.); +#18849 = EDGE_CURVE('',#18841,#18850,#18852,.T.); +#18850 = VERTEX_POINT('',#18851); +#18851 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#18852 = LINE('',#18853,#18854); +#18853 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#18854 = VECTOR('',#18855,1.); +#18855 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18856 = ORIENTED_EDGE('',*,*,#18857,.T.); +#18857 = EDGE_CURVE('',#18850,#18858,#18860,.T.); +#18858 = VERTEX_POINT('',#18859); +#18859 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#18860 = LINE('',#18861,#18862); +#18861 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#18862 = VECTOR('',#18863,1.); +#18863 = DIRECTION('',(0.,0.,1.)); +#18864 = ORIENTED_EDGE('',*,*,#18865,.T.); +#18865 = EDGE_CURVE('',#18858,#18866,#18868,.T.); +#18866 = VERTEX_POINT('',#18867); +#18867 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.21)); +#18868 = LINE('',#18869,#18870); +#18869 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#18870 = VECTOR('',#18871,1.); +#18871 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18872 = ORIENTED_EDGE('',*,*,#18873,.T.); +#18873 = EDGE_CURVE('',#18866,#18874,#18876,.T.); +#18874 = VERTEX_POINT('',#18875); +#18875 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#18876 = CIRCLE('',#18877,0.1); +#18877 = AXIS2_PLACEMENT_3D('',#18878,#18879,#18880); +#18878 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#18879 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18880 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18881 = ORIENTED_EDGE('',*,*,#18882,.T.); +#18882 = EDGE_CURVE('',#18874,#18883,#18885,.T.); +#18883 = VERTEX_POINT('',#18884); +#18884 = CARTESIAN_POINT('',(2.555290403434,-1.7,0.648830935077)); +#18885 = LINE('',#18886,#18887); +#18886 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#18887 = VECTOR('',#18888,1.); +#18888 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18889 = ORIENTED_EDGE('',*,*,#18890,.T.); +#18890 = EDGE_CURVE('',#18883,#18891,#18893,.T.); +#18891 = VERTEX_POINT('',#18892); +#18892 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#18893 = CIRCLE('',#18894,0.31); +#18894 = AXIS2_PLACEMENT_3D('',#18895,#18896,#18897); +#18895 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#18896 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18897 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18898 = ORIENTED_EDGE('',*,*,#18899,.T.); +#18899 = EDGE_CURVE('',#18891,#16789,#18900,.T.); +#18900 = LINE('',#18901,#18902); +#18901 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#18902 = VECTOR('',#18903,1.); +#18903 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18904 = PLANE('',#18905); +#18905 = AXIS2_PLACEMENT_3D('',#18906,#18907,#18908); +#18906 = CARTESIAN_POINT('',(2.476022294864,-1.7,0.454762084394)); +#18907 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18908 = DIRECTION('',(0.,0.,1.)); +#18909 = ADVANCED_FACE('',(#18910),#18929,.F.); +#18910 = FACE_BOUND('',#18911,.F.); +#18911 = EDGE_LOOP('',(#18912,#18913,#18922,#18928)); +#18912 = ORIENTED_EDGE('',*,*,#16827,.T.); +#18913 = ORIENTED_EDGE('',*,*,#18914,.T.); +#18914 = EDGE_CURVE('',#16820,#18915,#18917,.T.); +#18915 = VERTEX_POINT('',#18916); +#18916 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.612364817767)); +#18917 = CIRCLE('',#18918,0.1); +#18918 = AXIS2_PLACEMENT_3D('',#18919,#18920,#18921); +#18919 = CARTESIAN_POINT('',(2.25,-2.11,0.595)); +#18920 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18921 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18922 = ORIENTED_EDGE('',*,*,#18923,.F.); +#18923 = EDGE_CURVE('',#18824,#18915,#18924,.T.); +#18924 = LINE('',#18925,#18926); +#18925 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#18926 = VECTOR('',#18927,1.); +#18927 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18928 = ORIENTED_EDGE('',*,*,#18823,.F.); +#18929 = CYLINDRICAL_SURFACE('',#18930,0.1); +#18930 = AXIS2_PLACEMENT_3D('',#18931,#18932,#18933); +#18931 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#18932 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18933 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18934 = ADVANCED_FACE('',(#18935),#19013,.T.); +#18935 = FACE_BOUND('',#18936,.T.); +#18936 = EDGE_LOOP('',(#18937,#18938,#18939,#18940,#18948,#18957,#18965, + #18973,#18981,#18990,#18998,#19007)); +#18937 = ORIENTED_EDGE('',*,*,#16841,.F.); +#18938 = ORIENTED_EDGE('',*,*,#16819,.T.); +#18939 = ORIENTED_EDGE('',*,*,#18914,.T.); +#18940 = ORIENTED_EDGE('',*,*,#18941,.T.); +#18941 = EDGE_CURVE('',#18915,#18942,#18944,.T.); +#18942 = VERTEX_POINT('',#18943); +#18943 = CARTESIAN_POINT('',(2.404962786068,-2.11,0.256169064923)); +#18944 = LINE('',#18945,#18946); +#18945 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.612364817767)); +#18946 = VECTOR('',#18947,1.); +#18947 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18948 = ORIENTED_EDGE('',*,*,#18949,.T.); +#18949 = EDGE_CURVE('',#18942,#18950,#18952,.T.); +#18950 = VERTEX_POINT('',#18951); +#18951 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.)); +#18952 = CIRCLE('',#18953,0.31); +#18953 = AXIS2_PLACEMENT_3D('',#18954,#18955,#18956); +#18954 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.31)); +#18955 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18956 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18957 = ORIENTED_EDGE('',*,*,#18958,.T.); +#18958 = EDGE_CURVE('',#18950,#18959,#18961,.T.); +#18959 = VERTEX_POINT('',#18960); +#18960 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#18961 = LINE('',#18962,#18963); +#18962 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.)); +#18963 = VECTOR('',#18964,1.); +#18964 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18965 = ORIENTED_EDGE('',*,*,#18966,.T.); +#18966 = EDGE_CURVE('',#18959,#18967,#18969,.T.); +#18967 = VERTEX_POINT('',#18968); +#18968 = CARTESIAN_POINT('',(3.,-2.11,0.21)); +#18969 = LINE('',#18970,#18971); +#18970 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#18971 = VECTOR('',#18972,1.); +#18972 = DIRECTION('',(0.,0.,1.)); +#18973 = ORIENTED_EDGE('',*,*,#18974,.T.); +#18974 = EDGE_CURVE('',#18967,#18975,#18977,.T.); +#18975 = VERTEX_POINT('',#18976); +#18976 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.21)); +#18977 = LINE('',#18978,#18979); +#18978 = CARTESIAN_POINT('',(3.,-2.11,0.21)); +#18979 = VECTOR('',#18980,1.); +#18980 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18981 = ORIENTED_EDGE('',*,*,#18982,.T.); +#18982 = EDGE_CURVE('',#18975,#18983,#18985,.T.); +#18983 = VERTEX_POINT('',#18984); +#18984 = CARTESIAN_POINT('',(2.611772414201,-2.11,0.292635182233)); +#18985 = CIRCLE('',#18986,0.1); +#18986 = AXIS2_PLACEMENT_3D('',#18987,#18988,#18989); +#18987 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.31)); +#18988 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18989 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18990 = ORIENTED_EDGE('',*,*,#18991,.T.); +#18991 = EDGE_CURVE('',#18983,#18992,#18994,.T.); +#18992 = VERTEX_POINT('',#18993); +#18993 = CARTESIAN_POINT('',(2.555290403434,-2.11,0.648830935077)); +#18994 = LINE('',#18995,#18996); +#18995 = CARTESIAN_POINT('',(2.611772414201,-2.11,0.292635182233)); +#18996 = VECTOR('',#18997,1.); +#18997 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18998 = ORIENTED_EDGE('',*,*,#18999,.T.); +#18999 = EDGE_CURVE('',#18992,#19000,#19002,.T.); +#19000 = VERTEX_POINT('',#19001); +#19001 = CARTESIAN_POINT('',(2.25,-2.11,0.905)); +#19002 = CIRCLE('',#19003,0.31); +#19003 = AXIS2_PLACEMENT_3D('',#19004,#19005,#19006); +#19004 = CARTESIAN_POINT('',(2.25,-2.11,0.595)); +#19005 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#19006 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#19007 = ORIENTED_EDGE('',*,*,#19008,.T.); +#19008 = EDGE_CURVE('',#19000,#16842,#19009,.T.); +#19009 = LINE('',#19010,#19011); +#19010 = CARTESIAN_POINT('',(2.25,-2.11,0.905)); +#19011 = VECTOR('',#19012,1.); +#19012 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19013 = PLANE('',#19014); +#19014 = AXIS2_PLACEMENT_3D('',#19015,#19016,#19017); +#19015 = CARTESIAN_POINT('',(2.476022294864,-2.11,0.454762084394)); +#19016 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19017 = DIRECTION('',(0.,0.,1.)); +#19018 = ADVANCED_FACE('',(#19019),#19030,.T.); +#19019 = FACE_BOUND('',#19020,.T.); +#19020 = EDGE_LOOP('',(#19021,#19022,#19023,#19024)); +#19021 = ORIENTED_EDGE('',*,*,#18053,.T.); +#19022 = ORIENTED_EDGE('',*,*,#16954,.T.); +#19023 = ORIENTED_EDGE('',*,*,#18155,.F.); +#19024 = ORIENTED_EDGE('',*,*,#19025,.F.); +#19025 = EDGE_CURVE('',#18046,#18148,#19026,.T.); +#19026 = LINE('',#19027,#19028); +#19027 = CARTESIAN_POINT('',(-2.555290403434,1.7,0.648830935077)); +#19028 = VECTOR('',#19029,1.); +#19029 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19030 = CYLINDRICAL_SURFACE('',#19031,0.31); +#19031 = AXIS2_PLACEMENT_3D('',#19032,#19033,#19034); +#19032 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#19033 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19034 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19035 = ADVANCED_FACE('',(#19036),#19049,.F.); +#19036 = FACE_BOUND('',#19037,.F.); +#19037 = EDGE_LOOP('',(#19038,#19039,#19045,#19046,#19047,#19048)); +#19038 = ORIENTED_EDGE('',*,*,#17398,.F.); +#19039 = ORIENTED_EDGE('',*,*,#19040,.T.); +#19040 = EDGE_CURVE('',#17390,#17499,#19041,.T.); +#19041 = LINE('',#19042,#19043); +#19042 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#19043 = VECTOR('',#19044,1.); +#19044 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19045 = ORIENTED_EDGE('',*,*,#17507,.T.); +#19046 = ORIENTED_EDGE('',*,*,#17529,.T.); +#19047 = ORIENTED_EDGE('',*,*,#17001,.F.); +#19048 = ORIENTED_EDGE('',*,*,#17272,.F.); +#19049 = PLANE('',#19050); +#19050 = AXIS2_PLACEMENT_3D('',#19051,#19052,#19053); +#19051 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#19052 = DIRECTION('',(0.,0.,-1.)); +#19053 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19054 = ADVANCED_FACE('',(#19055),#19068,.F.); +#19055 = FACE_BOUND('',#19056,.F.); +#19056 = EDGE_LOOP('',(#19057,#19058,#19064,#19065,#19066,#19067)); +#19057 = ORIENTED_EDGE('',*,*,#17621,.F.); +#19058 = ORIENTED_EDGE('',*,*,#19059,.T.); +#19059 = EDGE_CURVE('',#17613,#17722,#19060,.T.); +#19060 = LINE('',#19061,#19062); +#19061 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#19062 = VECTOR('',#19063,1.); +#19063 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19064 = ORIENTED_EDGE('',*,*,#17730,.T.); +#19065 = ORIENTED_EDGE('',*,*,#17752,.T.); +#19066 = ORIENTED_EDGE('',*,*,#17017,.F.); +#19067 = ORIENTED_EDGE('',*,*,#17522,.F.); +#19068 = PLANE('',#19069); +#19069 = AXIS2_PLACEMENT_3D('',#19070,#19071,#19072); +#19070 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#19071 = DIRECTION('',(0.,0.,-1.)); +#19072 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19073 = ADVANCED_FACE('',(#19074),#19087,.F.); +#19074 = FACE_BOUND('',#19075,.F.); +#19075 = EDGE_LOOP('',(#19076,#19077,#19083,#19084,#19085,#19086)); +#19076 = ORIENTED_EDGE('',*,*,#17844,.F.); +#19077 = ORIENTED_EDGE('',*,*,#19078,.T.); +#19078 = EDGE_CURVE('',#17836,#17945,#19079,.T.); +#19079 = LINE('',#19080,#19081); +#19080 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#19081 = VECTOR('',#19082,1.); +#19082 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19083 = ORIENTED_EDGE('',*,*,#17953,.T.); +#19084 = ORIENTED_EDGE('',*,*,#17970,.T.); +#19085 = ORIENTED_EDGE('',*,*,#17033,.F.); +#19086 = ORIENTED_EDGE('',*,*,#17745,.F.); +#19087 = PLANE('',#19088); +#19088 = AXIS2_PLACEMENT_3D('',#19089,#19090,#19091); +#19089 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#19090 = DIRECTION('',(0.,0.,-1.)); +#19091 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19092 = ADVANCED_FACE('',(#19093,#19122),#19133,.T.); +#19093 = FACE_BOUND('',#19094,.T.); +#19094 = EDGE_LOOP('',(#19095,#19096,#19097,#19098,#19106,#19114,#19120, + #19121)); +#19095 = ORIENTED_EDGE('',*,*,#17108,.F.); +#19096 = ORIENTED_EDGE('',*,*,#17085,.F.); +#19097 = ORIENTED_EDGE('',*,*,#17056,.F.); +#19098 = ORIENTED_EDGE('',*,*,#19099,.F.); +#19099 = EDGE_CURVE('',#19100,#17057,#19102,.T.); +#19100 = VERTEX_POINT('',#19101); +#19101 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19102 = LINE('',#19103,#19104); +#19103 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19104 = VECTOR('',#19105,1.); +#19105 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19106 = ORIENTED_EDGE('',*,*,#19107,.F.); +#19107 = EDGE_CURVE('',#19108,#19100,#19110,.T.); +#19108 = VERTEX_POINT('',#19109); +#19109 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19110 = LINE('',#19111,#19112); +#19111 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19112 = VECTOR('',#19113,1.); +#19113 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19114 = ORIENTED_EDGE('',*,*,#19115,.F.); +#19115 = EDGE_CURVE('',#17212,#19108,#19116,.T.); +#19116 = LINE('',#19117,#19118); +#19117 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#19118 = VECTOR('',#19119,1.); +#19119 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19120 = ORIENTED_EDGE('',*,*,#17218,.F.); +#19121 = ORIENTED_EDGE('',*,*,#17131,.F.); +#19122 = FACE_BOUND('',#19123,.T.); +#19123 = EDGE_LOOP('',(#19124)); +#19124 = ORIENTED_EDGE('',*,*,#19125,.T.); +#19125 = EDGE_CURVE('',#19126,#19126,#19128,.T.); +#19126 = VERTEX_POINT('',#19127); +#19127 = CARTESIAN_POINT('',(-1.197342035991,1.397342035991,1.55)); +#19128 = CIRCLE('',#19129,0.3); +#19129 = AXIS2_PLACEMENT_3D('',#19130,#19131,#19132); +#19130 = CARTESIAN_POINT('',(-1.197342035991,1.697342035991,1.55)); +#19131 = DIRECTION('',(0.,-0.,-1.)); +#19132 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19133 = PLANE('',#19134); +#19134 = AXIS2_PLACEMENT_3D('',#19135,#19136,#19137); +#19135 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#19136 = DIRECTION('',(0.,0.,1.)); +#19137 = DIRECTION('',(0.574872573702,-0.818242949255,0.)); +#19138 = ADVANCED_FACE('',(#19139),#19149,.F.); +#19139 = FACE_BOUND('',#19140,.F.); +#19140 = EDGE_LOOP('',(#19141,#19142,#19143,#19144)); +#19141 = ORIENTED_EDGE('',*,*,#17279,.T.); +#19142 = ORIENTED_EDGE('',*,*,#17064,.T.); +#19143 = ORIENTED_EDGE('',*,*,#19099,.F.); +#19144 = ORIENTED_EDGE('',*,*,#19145,.F.); +#19145 = EDGE_CURVE('',#17280,#19100,#19146,.T.); +#19146 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#19147,#19148),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#19147 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#19148 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19149 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#19150,#19151) + ,(#19152,#19153 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#19150 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#19151 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19152 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#19153 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#19154 = ADVANCED_FACE('',(#19155),#19168,.F.); +#19155 = FACE_BOUND('',#19156,.F.); +#19156 = EDGE_LOOP('',(#19157,#19158,#19164,#19165,#19166,#19167)); +#19157 = ORIENTED_EDGE('',*,*,#18453,.F.); +#19158 = ORIENTED_EDGE('',*,*,#19159,.T.); +#19159 = EDGE_CURVE('',#18445,#18554,#19160,.T.); +#19160 = LINE('',#19161,#19162); +#19161 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#19162 = VECTOR('',#19163,1.); +#19163 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19164 = ORIENTED_EDGE('',*,*,#18562,.T.); +#19165 = ORIENTED_EDGE('',*,*,#18576,.T.); +#19166 = ORIENTED_EDGE('',*,*,#17163,.F.); +#19167 = ORIENTED_EDGE('',*,*,#18360,.F.); +#19168 = PLANE('',#19169); +#19169 = AXIS2_PLACEMENT_3D('',#19170,#19171,#19172); +#19170 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#19171 = DIRECTION('',(0.,0.,-1.)); +#19172 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19173 = ADVANCED_FACE('',(#19174),#19187,.F.); +#19174 = FACE_BOUND('',#19175,.F.); +#19175 = EDGE_LOOP('',(#19176,#19177,#19183,#19184,#19185,#19186)); +#19176 = ORIENTED_EDGE('',*,*,#18676,.F.); +#19177 = ORIENTED_EDGE('',*,*,#19178,.T.); +#19178 = EDGE_CURVE('',#18668,#18777,#19179,.T.); +#19179 = LINE('',#19180,#19181); +#19180 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#19181 = VECTOR('',#19182,1.); +#19182 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19183 = ORIENTED_EDGE('',*,*,#18785,.T.); +#19184 = ORIENTED_EDGE('',*,*,#18799,.T.); +#19185 = ORIENTED_EDGE('',*,*,#17179,.F.); +#19186 = ORIENTED_EDGE('',*,*,#18583,.F.); +#19187 = PLANE('',#19188); +#19188 = AXIS2_PLACEMENT_3D('',#19189,#19190,#19191); +#19189 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#19190 = DIRECTION('',(0.,0.,-1.)); +#19191 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19192 = ADVANCED_FACE('',(#19193),#19206,.F.); +#19193 = FACE_BOUND('',#19194,.F.); +#19194 = EDGE_LOOP('',(#19195,#19196,#19202,#19203,#19204,#19205)); +#19195 = ORIENTED_EDGE('',*,*,#18899,.F.); +#19196 = ORIENTED_EDGE('',*,*,#19197,.T.); +#19197 = EDGE_CURVE('',#18891,#19000,#19198,.T.); +#19198 = LINE('',#19199,#19200); +#19199 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#19200 = VECTOR('',#19201,1.); +#19201 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19202 = ORIENTED_EDGE('',*,*,#19008,.T.); +#19203 = ORIENTED_EDGE('',*,*,#17302,.T.); +#19204 = ORIENTED_EDGE('',*,*,#17195,.F.); +#19205 = ORIENTED_EDGE('',*,*,#18806,.F.); +#19206 = PLANE('',#19207); +#19207 = AXIS2_PLACEMENT_3D('',#19208,#19209,#19210); +#19208 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#19209 = DIRECTION('',(0.,0.,-1.)); +#19210 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19211 = ADVANCED_FACE('',(#19212),#19222,.F.); +#19212 = FACE_BOUND('',#19213,.F.); +#19213 = EDGE_LOOP('',(#19214,#19215,#19220,#19221)); +#19214 = ORIENTED_EDGE('',*,*,#17295,.T.); +#19215 = ORIENTED_EDGE('',*,*,#19216,.T.); +#19216 = EDGE_CURVE('',#17288,#19108,#19217,.T.); +#19217 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#19218,#19219),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#19218 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#19219 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19220 = ORIENTED_EDGE('',*,*,#19115,.F.); +#19221 = ORIENTED_EDGE('',*,*,#17211,.F.); +#19222 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#19223,#19224) + ,(#19225,#19226 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#19223 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#19224 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#19225 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#19226 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19227 = ADVANCED_FACE('',(#19228),#19239,.T.); +#19228 = FACE_BOUND('',#19229,.T.); +#19229 = EDGE_LOOP('',(#19230,#19231,#19232,#19233)); +#19230 = ORIENTED_EDGE('',*,*,#18240,.T.); +#19231 = ORIENTED_EDGE('',*,*,#17241,.T.); +#19232 = ORIENTED_EDGE('',*,*,#18342,.F.); +#19233 = ORIENTED_EDGE('',*,*,#19234,.F.); +#19234 = EDGE_CURVE('',#18233,#18335,#19235,.T.); +#19235 = LINE('',#19236,#19237); +#19236 = CARTESIAN_POINT('',(2.555290403434,2.11,0.648830935077)); +#19237 = VECTOR('',#19238,1.); +#19238 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19239 = CYLINDRICAL_SURFACE('',#19240,0.31); +#19240 = AXIS2_PLACEMENT_3D('',#19241,#19242,#19243); +#19241 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#19242 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19243 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#19244 = ADVANCED_FACE('',(#19245),#19251,.F.); +#19245 = FACE_BOUND('',#19246,.F.); +#19246 = EDGE_LOOP('',(#19247,#19248,#19249,#19250)); +#19247 = ORIENTED_EDGE('',*,*,#17287,.T.); +#19248 = ORIENTED_EDGE('',*,*,#19145,.T.); +#19249 = ORIENTED_EDGE('',*,*,#19107,.F.); +#19250 = ORIENTED_EDGE('',*,*,#19216,.F.); +#19251 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#19252,#19253) + ,(#19254,#19255 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#19252 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#19253 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19254 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#19255 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19256 = ADVANCED_FACE('',(#19257),#19268,.T.); +#19257 = FACE_BOUND('',#19258,.T.); +#19258 = EDGE_LOOP('',(#19259,#19260,#19261,#19262)); +#19259 = ORIENTED_EDGE('',*,*,#17389,.T.); +#19260 = ORIENTED_EDGE('',*,*,#19040,.T.); +#19261 = ORIENTED_EDGE('',*,*,#17498,.F.); +#19262 = ORIENTED_EDGE('',*,*,#19263,.F.); +#19263 = EDGE_CURVE('',#17382,#17491,#19264,.T.); +#19264 = LINE('',#19265,#19266); +#19265 = CARTESIAN_POINT('',(-2.555290403434,-2.11,0.648830935077)); +#19266 = VECTOR('',#19267,1.); +#19267 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19268 = CYLINDRICAL_SURFACE('',#19269,0.31); +#19269 = AXIS2_PLACEMENT_3D('',#19270,#19271,#19272); +#19270 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#19271 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19272 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19273 = ADVANCED_FACE('',(#19274),#19285,.F.); +#19274 = FACE_BOUND('',#19275,.F.); +#19275 = EDGE_LOOP('',(#19276,#19282,#19283,#19284)); +#19276 = ORIENTED_EDGE('',*,*,#19277,.T.); +#19277 = EDGE_CURVE('',#17373,#17482,#19278,.T.); +#19278 = LINE('',#19279,#19280); +#19279 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#19280 = VECTOR('',#19281,1.); +#19281 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19282 = ORIENTED_EDGE('',*,*,#17490,.T.); +#19283 = ORIENTED_EDGE('',*,*,#19263,.F.); +#19284 = ORIENTED_EDGE('',*,*,#17381,.F.); +#19285 = PLANE('',#19286); +#19286 = AXIS2_PLACEMENT_3D('',#19287,#19288,#19289); +#19287 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#19288 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19289 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19290 = ADVANCED_FACE('',(#19291),#19302,.F.); +#19291 = FACE_BOUND('',#19292,.F.); +#19292 = EDGE_LOOP('',(#19293,#19299,#19300,#19301)); +#19293 = ORIENTED_EDGE('',*,*,#19294,.T.); +#19294 = EDGE_CURVE('',#17365,#17474,#19295,.T.); +#19295 = LINE('',#19296,#19297); +#19296 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.21)); +#19297 = VECTOR('',#19298,1.); +#19298 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19299 = ORIENTED_EDGE('',*,*,#17481,.T.); +#19300 = ORIENTED_EDGE('',*,*,#19277,.F.); +#19301 = ORIENTED_EDGE('',*,*,#17372,.F.); +#19302 = CYLINDRICAL_SURFACE('',#19303,0.1); +#19303 = AXIS2_PLACEMENT_3D('',#19304,#19305,#19306); +#19304 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#19305 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19306 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19307 = ADVANCED_FACE('',(#19308),#19319,.F.); +#19308 = FACE_BOUND('',#19309,.F.); +#19309 = EDGE_LOOP('',(#19310,#19316,#19317,#19318)); +#19310 = ORIENTED_EDGE('',*,*,#19311,.T.); +#19311 = EDGE_CURVE('',#17357,#17466,#19312,.T.); +#19312 = LINE('',#19313,#19314); +#19313 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#19314 = VECTOR('',#19315,1.); +#19315 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19316 = ORIENTED_EDGE('',*,*,#17473,.T.); +#19317 = ORIENTED_EDGE('',*,*,#19294,.F.); +#19318 = ORIENTED_EDGE('',*,*,#17364,.F.); +#19319 = PLANE('',#19320); +#19320 = AXIS2_PLACEMENT_3D('',#19321,#19322,#19323); +#19321 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#19322 = DIRECTION('',(0.,0.,-1.)); +#19323 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19324 = ADVANCED_FACE('',(#19325),#19336,.F.); +#19325 = FACE_BOUND('',#19326,.F.); +#19326 = EDGE_LOOP('',(#19327,#19333,#19334,#19335)); +#19327 = ORIENTED_EDGE('',*,*,#19328,.T.); +#19328 = EDGE_CURVE('',#17349,#17458,#19329,.T.); +#19329 = LINE('',#19330,#19331); +#19330 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#19331 = VECTOR('',#19332,1.); +#19332 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19333 = ORIENTED_EDGE('',*,*,#17465,.T.); +#19334 = ORIENTED_EDGE('',*,*,#19311,.F.); +#19335 = ORIENTED_EDGE('',*,*,#17356,.F.); +#19336 = PLANE('',#19337); +#19337 = AXIS2_PLACEMENT_3D('',#19338,#19339,#19340); +#19338 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#19339 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19340 = DIRECTION('',(0.,0.,1.)); +#19341 = ADVANCED_FACE('',(#19342),#19353,.F.); +#19342 = FACE_BOUND('',#19343,.F.); +#19343 = EDGE_LOOP('',(#19344,#19350,#19351,#19352)); +#19344 = ORIENTED_EDGE('',*,*,#19345,.T.); +#19345 = EDGE_CURVE('',#17340,#17449,#19346,.T.); +#19346 = LINE('',#19347,#19348); +#19347 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#19348 = VECTOR('',#19349,1.); +#19349 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19350 = ORIENTED_EDGE('',*,*,#17457,.T.); +#19351 = ORIENTED_EDGE('',*,*,#19328,.F.); +#19352 = ORIENTED_EDGE('',*,*,#17348,.F.); +#19353 = PLANE('',#19354); +#19354 = AXIS2_PLACEMENT_3D('',#19355,#19356,#19357); +#19355 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#19356 = DIRECTION('',(0.,0.,1.)); +#19357 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19358 = ADVANCED_FACE('',(#19359),#19370,.T.); +#19359 = FACE_BOUND('',#19360,.T.); +#19360 = EDGE_LOOP('',(#19361,#19362,#19363,#19364)); +#19361 = ORIENTED_EDGE('',*,*,#17339,.T.); +#19362 = ORIENTED_EDGE('',*,*,#19345,.T.); +#19363 = ORIENTED_EDGE('',*,*,#17448,.F.); +#19364 = ORIENTED_EDGE('',*,*,#19365,.F.); +#19365 = EDGE_CURVE('',#17332,#17441,#19366,.T.); +#19366 = LINE('',#19367,#19368); +#19367 = CARTESIAN_POINT('',(-2.404962786068,-2.11,0.256169064923)); +#19368 = VECTOR('',#19369,1.); +#19369 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19370 = CYLINDRICAL_SURFACE('',#19371,0.31); +#19371 = AXIS2_PLACEMENT_3D('',#19372,#19373,#19374); +#19372 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#19373 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19374 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19375 = ADVANCED_FACE('',(#19376),#19382,.F.); +#19376 = FACE_BOUND('',#19377,.F.); +#19377 = EDGE_LOOP('',(#19378,#19379,#19380,#19381)); +#19378 = ORIENTED_EDGE('',*,*,#17422,.T.); +#19379 = ORIENTED_EDGE('',*,*,#17440,.T.); +#19380 = ORIENTED_EDGE('',*,*,#19365,.F.); +#19381 = ORIENTED_EDGE('',*,*,#17331,.F.); +#19382 = PLANE('',#19383); +#19383 = AXIS2_PLACEMENT_3D('',#19384,#19385,#19386); +#19384 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#19385 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19386 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19387 = ADVANCED_FACE('',(#19388),#19399,.T.); +#19388 = FACE_BOUND('',#19389,.T.); +#19389 = EDGE_LOOP('',(#19390,#19391,#19392,#19393)); +#19390 = ORIENTED_EDGE('',*,*,#17612,.T.); +#19391 = ORIENTED_EDGE('',*,*,#19059,.T.); +#19392 = ORIENTED_EDGE('',*,*,#17721,.F.); +#19393 = ORIENTED_EDGE('',*,*,#19394,.F.); +#19394 = EDGE_CURVE('',#17605,#17714,#19395,.T.); +#19395 = LINE('',#19396,#19397); +#19396 = CARTESIAN_POINT('',(-2.555290403434,-0.84,0.648830935077)); +#19397 = VECTOR('',#19398,1.); +#19398 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19399 = CYLINDRICAL_SURFACE('',#19400,0.31); +#19400 = AXIS2_PLACEMENT_3D('',#19401,#19402,#19403); +#19401 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#19402 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19403 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19404 = ADVANCED_FACE('',(#19405),#19416,.F.); +#19405 = FACE_BOUND('',#19406,.F.); +#19406 = EDGE_LOOP('',(#19407,#19413,#19414,#19415)); +#19407 = ORIENTED_EDGE('',*,*,#19408,.T.); +#19408 = EDGE_CURVE('',#17596,#17705,#19409,.T.); +#19409 = LINE('',#19410,#19411); +#19410 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#19411 = VECTOR('',#19412,1.); +#19412 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19413 = ORIENTED_EDGE('',*,*,#17713,.T.); +#19414 = ORIENTED_EDGE('',*,*,#19394,.F.); +#19415 = ORIENTED_EDGE('',*,*,#17604,.F.); +#19416 = PLANE('',#19417); +#19417 = AXIS2_PLACEMENT_3D('',#19418,#19419,#19420); +#19418 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#19419 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19420 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19421 = ADVANCED_FACE('',(#19422),#19433,.F.); +#19422 = FACE_BOUND('',#19423,.F.); +#19423 = EDGE_LOOP('',(#19424,#19430,#19431,#19432)); +#19424 = ORIENTED_EDGE('',*,*,#19425,.T.); +#19425 = EDGE_CURVE('',#17588,#17697,#19426,.T.); +#19426 = LINE('',#19427,#19428); +#19427 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.21)); +#19428 = VECTOR('',#19429,1.); +#19429 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19430 = ORIENTED_EDGE('',*,*,#17704,.T.); +#19431 = ORIENTED_EDGE('',*,*,#19408,.F.); +#19432 = ORIENTED_EDGE('',*,*,#17595,.F.); +#19433 = CYLINDRICAL_SURFACE('',#19434,0.1); +#19434 = AXIS2_PLACEMENT_3D('',#19435,#19436,#19437); +#19435 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#19436 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19437 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19438 = ADVANCED_FACE('',(#19439),#19450,.F.); +#19439 = FACE_BOUND('',#19440,.F.); +#19440 = EDGE_LOOP('',(#19441,#19447,#19448,#19449)); +#19441 = ORIENTED_EDGE('',*,*,#19442,.T.); +#19442 = EDGE_CURVE('',#17580,#17689,#19443,.T.); +#19443 = LINE('',#19444,#19445); +#19444 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#19445 = VECTOR('',#19446,1.); +#19446 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19447 = ORIENTED_EDGE('',*,*,#17696,.T.); +#19448 = ORIENTED_EDGE('',*,*,#19425,.F.); +#19449 = ORIENTED_EDGE('',*,*,#17587,.F.); +#19450 = PLANE('',#19451); +#19451 = AXIS2_PLACEMENT_3D('',#19452,#19453,#19454); +#19452 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#19453 = DIRECTION('',(0.,0.,-1.)); +#19454 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19455 = ADVANCED_FACE('',(#19456),#19467,.F.); +#19456 = FACE_BOUND('',#19457,.F.); +#19457 = EDGE_LOOP('',(#19458,#19464,#19465,#19466)); +#19458 = ORIENTED_EDGE('',*,*,#19459,.T.); +#19459 = EDGE_CURVE('',#17572,#17681,#19460,.T.); +#19460 = LINE('',#19461,#19462); +#19461 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#19462 = VECTOR('',#19463,1.); +#19463 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19464 = ORIENTED_EDGE('',*,*,#17688,.T.); +#19465 = ORIENTED_EDGE('',*,*,#19442,.F.); +#19466 = ORIENTED_EDGE('',*,*,#17579,.F.); +#19467 = PLANE('',#19468); +#19468 = AXIS2_PLACEMENT_3D('',#19469,#19470,#19471); +#19469 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#19470 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19471 = DIRECTION('',(0.,0.,1.)); +#19472 = ADVANCED_FACE('',(#19473),#19484,.F.); +#19473 = FACE_BOUND('',#19474,.F.); +#19474 = EDGE_LOOP('',(#19475,#19481,#19482,#19483)); +#19475 = ORIENTED_EDGE('',*,*,#19476,.T.); +#19476 = EDGE_CURVE('',#17563,#17672,#19477,.T.); +#19477 = LINE('',#19478,#19479); +#19478 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#19479 = VECTOR('',#19480,1.); +#19480 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19481 = ORIENTED_EDGE('',*,*,#17680,.T.); +#19482 = ORIENTED_EDGE('',*,*,#19459,.F.); +#19483 = ORIENTED_EDGE('',*,*,#17571,.F.); +#19484 = PLANE('',#19485); +#19485 = AXIS2_PLACEMENT_3D('',#19486,#19487,#19488); +#19486 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#19487 = DIRECTION('',(0.,0.,1.)); +#19488 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19489 = ADVANCED_FACE('',(#19490),#19501,.T.); +#19490 = FACE_BOUND('',#19491,.T.); +#19491 = EDGE_LOOP('',(#19492,#19493,#19494,#19495)); +#19492 = ORIENTED_EDGE('',*,*,#17562,.T.); +#19493 = ORIENTED_EDGE('',*,*,#19476,.T.); +#19494 = ORIENTED_EDGE('',*,*,#17671,.F.); +#19495 = ORIENTED_EDGE('',*,*,#19496,.F.); +#19496 = EDGE_CURVE('',#17555,#17664,#19497,.T.); +#19497 = LINE('',#19498,#19499); +#19498 = CARTESIAN_POINT('',(-2.404962786068,-0.84,0.256169064923)); +#19499 = VECTOR('',#19500,1.); +#19500 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19501 = CYLINDRICAL_SURFACE('',#19502,0.31); +#19502 = AXIS2_PLACEMENT_3D('',#19503,#19504,#19505); +#19503 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#19504 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19505 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19506 = ADVANCED_FACE('',(#19507),#19513,.F.); +#19507 = FACE_BOUND('',#19508,.F.); +#19508 = EDGE_LOOP('',(#19509,#19510,#19511,#19512)); +#19509 = ORIENTED_EDGE('',*,*,#17645,.T.); +#19510 = ORIENTED_EDGE('',*,*,#17663,.T.); +#19511 = ORIENTED_EDGE('',*,*,#19496,.F.); +#19512 = ORIENTED_EDGE('',*,*,#17554,.F.); +#19513 = PLANE('',#19514); +#19514 = AXIS2_PLACEMENT_3D('',#19515,#19516,#19517); +#19515 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#19516 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19517 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19518 = ADVANCED_FACE('',(#19519),#19530,.T.); +#19519 = FACE_BOUND('',#19520,.T.); +#19520 = EDGE_LOOP('',(#19521,#19522,#19523,#19524)); +#19521 = ORIENTED_EDGE('',*,*,#17835,.T.); +#19522 = ORIENTED_EDGE('',*,*,#19078,.T.); +#19523 = ORIENTED_EDGE('',*,*,#17944,.F.); +#19524 = ORIENTED_EDGE('',*,*,#19525,.F.); +#19525 = EDGE_CURVE('',#17828,#17937,#19526,.T.); +#19526 = LINE('',#19527,#19528); +#19527 = CARTESIAN_POINT('',(-2.555290403434,0.43,0.648830935077)); +#19528 = VECTOR('',#19529,1.); +#19529 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19530 = CYLINDRICAL_SURFACE('',#19531,0.31); +#19531 = AXIS2_PLACEMENT_3D('',#19532,#19533,#19534); +#19532 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#19533 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19534 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19535 = ADVANCED_FACE('',(#19536),#19547,.F.); +#19536 = FACE_BOUND('',#19537,.F.); +#19537 = EDGE_LOOP('',(#19538,#19544,#19545,#19546)); +#19538 = ORIENTED_EDGE('',*,*,#19539,.T.); +#19539 = EDGE_CURVE('',#17819,#17928,#19540,.T.); +#19540 = LINE('',#19541,#19542); +#19541 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#19542 = VECTOR('',#19543,1.); +#19543 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19544 = ORIENTED_EDGE('',*,*,#17936,.T.); +#19545 = ORIENTED_EDGE('',*,*,#19525,.F.); +#19546 = ORIENTED_EDGE('',*,*,#17827,.F.); +#19547 = PLANE('',#19548); +#19548 = AXIS2_PLACEMENT_3D('',#19549,#19550,#19551); +#19549 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#19550 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19551 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19552 = ADVANCED_FACE('',(#19553),#19564,.F.); +#19553 = FACE_BOUND('',#19554,.F.); +#19554 = EDGE_LOOP('',(#19555,#19561,#19562,#19563)); +#19555 = ORIENTED_EDGE('',*,*,#19556,.T.); +#19556 = EDGE_CURVE('',#17811,#17920,#19557,.T.); +#19557 = LINE('',#19558,#19559); +#19558 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.21)); +#19559 = VECTOR('',#19560,1.); +#19560 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19561 = ORIENTED_EDGE('',*,*,#17927,.T.); +#19562 = ORIENTED_EDGE('',*,*,#19539,.F.); +#19563 = ORIENTED_EDGE('',*,*,#17818,.F.); +#19564 = CYLINDRICAL_SURFACE('',#19565,0.1); +#19565 = AXIS2_PLACEMENT_3D('',#19566,#19567,#19568); +#19566 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#19567 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19568 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19569 = ADVANCED_FACE('',(#19570),#19581,.F.); +#19570 = FACE_BOUND('',#19571,.F.); +#19571 = EDGE_LOOP('',(#19572,#19578,#19579,#19580)); +#19572 = ORIENTED_EDGE('',*,*,#19573,.T.); +#19573 = EDGE_CURVE('',#17803,#17912,#19574,.T.); +#19574 = LINE('',#19575,#19576); +#19575 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#19576 = VECTOR('',#19577,1.); +#19577 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19578 = ORIENTED_EDGE('',*,*,#17919,.T.); +#19579 = ORIENTED_EDGE('',*,*,#19556,.F.); +#19580 = ORIENTED_EDGE('',*,*,#17810,.F.); +#19581 = PLANE('',#19582); +#19582 = AXIS2_PLACEMENT_3D('',#19583,#19584,#19585); +#19583 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#19584 = DIRECTION('',(0.,0.,-1.)); +#19585 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19586 = ADVANCED_FACE('',(#19587),#19598,.F.); +#19587 = FACE_BOUND('',#19588,.F.); +#19588 = EDGE_LOOP('',(#19589,#19595,#19596,#19597)); +#19589 = ORIENTED_EDGE('',*,*,#19590,.T.); +#19590 = EDGE_CURVE('',#17795,#17904,#19591,.T.); +#19591 = LINE('',#19592,#19593); +#19592 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#19593 = VECTOR('',#19594,1.); +#19594 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19595 = ORIENTED_EDGE('',*,*,#17911,.T.); +#19596 = ORIENTED_EDGE('',*,*,#19573,.F.); +#19597 = ORIENTED_EDGE('',*,*,#17802,.F.); +#19598 = PLANE('',#19599); +#19599 = AXIS2_PLACEMENT_3D('',#19600,#19601,#19602); +#19600 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#19601 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19602 = DIRECTION('',(0.,0.,1.)); +#19603 = ADVANCED_FACE('',(#19604),#19615,.F.); +#19604 = FACE_BOUND('',#19605,.F.); +#19605 = EDGE_LOOP('',(#19606,#19612,#19613,#19614)); +#19606 = ORIENTED_EDGE('',*,*,#19607,.T.); +#19607 = EDGE_CURVE('',#17786,#17895,#19608,.T.); +#19608 = LINE('',#19609,#19610); +#19609 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#19610 = VECTOR('',#19611,1.); +#19611 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19612 = ORIENTED_EDGE('',*,*,#17903,.T.); +#19613 = ORIENTED_EDGE('',*,*,#19590,.F.); +#19614 = ORIENTED_EDGE('',*,*,#17794,.F.); +#19615 = PLANE('',#19616); +#19616 = AXIS2_PLACEMENT_3D('',#19617,#19618,#19619); +#19617 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#19618 = DIRECTION('',(0.,0.,1.)); +#19619 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19620 = ADVANCED_FACE('',(#19621),#19632,.T.); +#19621 = FACE_BOUND('',#19622,.T.); +#19622 = EDGE_LOOP('',(#19623,#19624,#19625,#19626)); +#19623 = ORIENTED_EDGE('',*,*,#17785,.T.); +#19624 = ORIENTED_EDGE('',*,*,#19607,.T.); +#19625 = ORIENTED_EDGE('',*,*,#17894,.F.); +#19626 = ORIENTED_EDGE('',*,*,#19627,.F.); +#19627 = EDGE_CURVE('',#17778,#17887,#19628,.T.); +#19628 = LINE('',#19629,#19630); +#19629 = CARTESIAN_POINT('',(-2.404962786068,0.43,0.256169064923)); +#19630 = VECTOR('',#19631,1.); +#19631 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19632 = CYLINDRICAL_SURFACE('',#19633,0.31); +#19633 = AXIS2_PLACEMENT_3D('',#19634,#19635,#19636); +#19634 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#19635 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19636 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19637 = ADVANCED_FACE('',(#19638),#19644,.F.); +#19638 = FACE_BOUND('',#19639,.F.); +#19639 = EDGE_LOOP('',(#19640,#19641,#19642,#19643)); +#19640 = ORIENTED_EDGE('',*,*,#17868,.T.); +#19641 = ORIENTED_EDGE('',*,*,#17886,.T.); +#19642 = ORIENTED_EDGE('',*,*,#19627,.F.); +#19643 = ORIENTED_EDGE('',*,*,#17777,.F.); +#19644 = PLANE('',#19645); +#19645 = AXIS2_PLACEMENT_3D('',#19646,#19647,#19648); +#19646 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#19647 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19648 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19649 = ADVANCED_FACE('',(#19650),#19661,.F.); +#19650 = FACE_BOUND('',#19651,.F.); +#19651 = EDGE_LOOP('',(#19652,#19658,#19659,#19660)); +#19652 = ORIENTED_EDGE('',*,*,#19653,.T.); +#19653 = EDGE_CURVE('',#18037,#18139,#19654,.T.); +#19654 = LINE('',#19655,#19656); +#19655 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#19656 = VECTOR('',#19657,1.); +#19657 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19658 = ORIENTED_EDGE('',*,*,#18147,.T.); +#19659 = ORIENTED_EDGE('',*,*,#19025,.F.); +#19660 = ORIENTED_EDGE('',*,*,#18045,.F.); +#19661 = PLANE('',#19662); +#19662 = AXIS2_PLACEMENT_3D('',#19663,#19664,#19665); +#19663 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#19664 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19665 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19666 = ADVANCED_FACE('',(#19667),#19678,.F.); +#19667 = FACE_BOUND('',#19668,.F.); +#19668 = EDGE_LOOP('',(#19669,#19675,#19676,#19677)); +#19669 = ORIENTED_EDGE('',*,*,#19670,.T.); +#19670 = EDGE_CURVE('',#18029,#18131,#19671,.T.); +#19671 = LINE('',#19672,#19673); +#19672 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.21)); +#19673 = VECTOR('',#19674,1.); +#19674 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19675 = ORIENTED_EDGE('',*,*,#18138,.T.); +#19676 = ORIENTED_EDGE('',*,*,#19653,.F.); +#19677 = ORIENTED_EDGE('',*,*,#18036,.F.); +#19678 = CYLINDRICAL_SURFACE('',#19679,0.1); +#19679 = AXIS2_PLACEMENT_3D('',#19680,#19681,#19682); +#19680 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#19681 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19682 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19683 = ADVANCED_FACE('',(#19684),#19695,.F.); +#19684 = FACE_BOUND('',#19685,.F.); +#19685 = EDGE_LOOP('',(#19686,#19692,#19693,#19694)); +#19686 = ORIENTED_EDGE('',*,*,#19687,.T.); +#19687 = EDGE_CURVE('',#18021,#18123,#19688,.T.); +#19688 = LINE('',#19689,#19690); +#19689 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#19690 = VECTOR('',#19691,1.); +#19691 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19692 = ORIENTED_EDGE('',*,*,#18130,.T.); +#19693 = ORIENTED_EDGE('',*,*,#19670,.F.); +#19694 = ORIENTED_EDGE('',*,*,#18028,.F.); +#19695 = PLANE('',#19696); +#19696 = AXIS2_PLACEMENT_3D('',#19697,#19698,#19699); +#19697 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#19698 = DIRECTION('',(0.,0.,-1.)); +#19699 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19700 = ADVANCED_FACE('',(#19701),#19712,.F.); +#19701 = FACE_BOUND('',#19702,.F.); +#19702 = EDGE_LOOP('',(#19703,#19709,#19710,#19711)); +#19703 = ORIENTED_EDGE('',*,*,#19704,.T.); +#19704 = EDGE_CURVE('',#18013,#18115,#19705,.T.); +#19705 = LINE('',#19706,#19707); +#19706 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#19707 = VECTOR('',#19708,1.); +#19708 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19709 = ORIENTED_EDGE('',*,*,#18122,.T.); +#19710 = ORIENTED_EDGE('',*,*,#19687,.F.); +#19711 = ORIENTED_EDGE('',*,*,#18020,.F.); +#19712 = PLANE('',#19713); +#19713 = AXIS2_PLACEMENT_3D('',#19714,#19715,#19716); +#19714 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#19715 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19716 = DIRECTION('',(0.,0.,1.)); +#19717 = ADVANCED_FACE('',(#19718),#19729,.F.); +#19718 = FACE_BOUND('',#19719,.F.); +#19719 = EDGE_LOOP('',(#19720,#19726,#19727,#19728)); +#19720 = ORIENTED_EDGE('',*,*,#19721,.T.); +#19721 = EDGE_CURVE('',#18004,#18106,#19722,.T.); +#19722 = LINE('',#19723,#19724); +#19723 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#19724 = VECTOR('',#19725,1.); +#19725 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19726 = ORIENTED_EDGE('',*,*,#18114,.T.); +#19727 = ORIENTED_EDGE('',*,*,#19704,.F.); +#19728 = ORIENTED_EDGE('',*,*,#18012,.F.); +#19729 = PLANE('',#19730); +#19730 = AXIS2_PLACEMENT_3D('',#19731,#19732,#19733); +#19731 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#19732 = DIRECTION('',(0.,0.,1.)); +#19733 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19734 = ADVANCED_FACE('',(#19735),#19746,.T.); +#19735 = FACE_BOUND('',#19736,.T.); +#19736 = EDGE_LOOP('',(#19737,#19738,#19739,#19740)); +#19737 = ORIENTED_EDGE('',*,*,#18003,.T.); +#19738 = ORIENTED_EDGE('',*,*,#19721,.T.); +#19739 = ORIENTED_EDGE('',*,*,#18105,.F.); +#19740 = ORIENTED_EDGE('',*,*,#19741,.F.); +#19741 = EDGE_CURVE('',#17996,#18098,#19742,.T.); +#19742 = LINE('',#19743,#19744); +#19743 = CARTESIAN_POINT('',(-2.404962786068,1.7,0.256169064923)); +#19744 = VECTOR('',#19745,1.); +#19745 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19746 = CYLINDRICAL_SURFACE('',#19747,0.31); +#19747 = AXIS2_PLACEMENT_3D('',#19748,#19749,#19750); +#19748 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#19749 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19750 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19751 = ADVANCED_FACE('',(#19752),#19758,.F.); +#19752 = FACE_BOUND('',#19753,.F.); +#19753 = EDGE_LOOP('',(#19754,#19755,#19756,#19757)); +#19754 = ORIENTED_EDGE('',*,*,#18079,.T.); +#19755 = ORIENTED_EDGE('',*,*,#18097,.T.); +#19756 = ORIENTED_EDGE('',*,*,#19741,.F.); +#19757 = ORIENTED_EDGE('',*,*,#17995,.F.); +#19758 = PLANE('',#19759); +#19759 = AXIS2_PLACEMENT_3D('',#19760,#19761,#19762); +#19760 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#19761 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19762 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19763 = ADVANCED_FACE('',(#19764),#19775,.F.); +#19764 = FACE_BOUND('',#19765,.F.); +#19765 = EDGE_LOOP('',(#19766,#19772,#19773,#19774)); +#19766 = ORIENTED_EDGE('',*,*,#19767,.T.); +#19767 = EDGE_CURVE('',#18224,#18326,#19768,.T.); +#19768 = LINE('',#19769,#19770); +#19769 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#19770 = VECTOR('',#19771,1.); +#19771 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19772 = ORIENTED_EDGE('',*,*,#18334,.T.); +#19773 = ORIENTED_EDGE('',*,*,#19234,.F.); +#19774 = ORIENTED_EDGE('',*,*,#18232,.F.); +#19775 = PLANE('',#19776); +#19776 = AXIS2_PLACEMENT_3D('',#19777,#19778,#19779); +#19777 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#19778 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#19779 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#19780 = ADVANCED_FACE('',(#19781),#19792,.F.); +#19781 = FACE_BOUND('',#19782,.F.); +#19782 = EDGE_LOOP('',(#19783,#19789,#19790,#19791)); +#19783 = ORIENTED_EDGE('',*,*,#19784,.T.); +#19784 = EDGE_CURVE('',#18216,#18318,#19785,.T.); +#19785 = LINE('',#19786,#19787); +#19786 = CARTESIAN_POINT('',(2.710253189502,2.11,0.21)); +#19787 = VECTOR('',#19788,1.); +#19788 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19789 = ORIENTED_EDGE('',*,*,#18325,.T.); +#19790 = ORIENTED_EDGE('',*,*,#19767,.F.); +#19791 = ORIENTED_EDGE('',*,*,#18223,.F.); +#19792 = CYLINDRICAL_SURFACE('',#19793,0.1); +#19793 = AXIS2_PLACEMENT_3D('',#19794,#19795,#19796); +#19794 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#19795 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19796 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#19797 = ADVANCED_FACE('',(#19798),#19809,.F.); +#19798 = FACE_BOUND('',#19799,.F.); +#19799 = EDGE_LOOP('',(#19800,#19806,#19807,#19808)); +#19800 = ORIENTED_EDGE('',*,*,#19801,.T.); +#19801 = EDGE_CURVE('',#18208,#18310,#19802,.T.); +#19802 = LINE('',#19803,#19804); +#19803 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#19804 = VECTOR('',#19805,1.); +#19805 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19806 = ORIENTED_EDGE('',*,*,#18317,.T.); +#19807 = ORIENTED_EDGE('',*,*,#19784,.F.); +#19808 = ORIENTED_EDGE('',*,*,#18215,.F.); +#19809 = PLANE('',#19810); +#19810 = AXIS2_PLACEMENT_3D('',#19811,#19812,#19813); +#19811 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#19812 = DIRECTION('',(0.,0.,-1.)); +#19813 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19814 = ADVANCED_FACE('',(#19815),#19826,.F.); +#19815 = FACE_BOUND('',#19816,.F.); +#19816 = EDGE_LOOP('',(#19817,#19823,#19824,#19825)); +#19817 = ORIENTED_EDGE('',*,*,#19818,.T.); +#19818 = EDGE_CURVE('',#18200,#18302,#19819,.T.); +#19819 = LINE('',#19820,#19821); +#19820 = CARTESIAN_POINT('',(3.,2.11,0.)); +#19821 = VECTOR('',#19822,1.); +#19822 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19823 = ORIENTED_EDGE('',*,*,#18309,.T.); +#19824 = ORIENTED_EDGE('',*,*,#19801,.F.); +#19825 = ORIENTED_EDGE('',*,*,#18207,.F.); +#19826 = PLANE('',#19827); +#19827 = AXIS2_PLACEMENT_3D('',#19828,#19829,#19830); +#19828 = CARTESIAN_POINT('',(3.,2.11,0.)); +#19829 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19830 = DIRECTION('',(0.,0.,1.)); +#19831 = ADVANCED_FACE('',(#19832),#19843,.F.); +#19832 = FACE_BOUND('',#19833,.F.); +#19833 = EDGE_LOOP('',(#19834,#19840,#19841,#19842)); +#19834 = ORIENTED_EDGE('',*,*,#19835,.T.); +#19835 = EDGE_CURVE('',#18191,#18293,#19836,.T.); +#19836 = LINE('',#19837,#19838); +#19837 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#19838 = VECTOR('',#19839,1.); +#19839 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19840 = ORIENTED_EDGE('',*,*,#18301,.T.); +#19841 = ORIENTED_EDGE('',*,*,#19818,.F.); +#19842 = ORIENTED_EDGE('',*,*,#18199,.F.); +#19843 = PLANE('',#19844); +#19844 = AXIS2_PLACEMENT_3D('',#19845,#19846,#19847); +#19845 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#19846 = DIRECTION('',(0.,0.,1.)); +#19847 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#19848 = ADVANCED_FACE('',(#19849),#19860,.T.); +#19849 = FACE_BOUND('',#19850,.T.); +#19850 = EDGE_LOOP('',(#19851,#19852,#19853,#19854)); +#19851 = ORIENTED_EDGE('',*,*,#18190,.T.); +#19852 = ORIENTED_EDGE('',*,*,#19835,.T.); +#19853 = ORIENTED_EDGE('',*,*,#18292,.F.); +#19854 = ORIENTED_EDGE('',*,*,#19855,.F.); +#19855 = EDGE_CURVE('',#18183,#18285,#19856,.T.); +#19856 = LINE('',#19857,#19858); +#19857 = CARTESIAN_POINT('',(2.404962786068,2.11,0.256169064923)); +#19858 = VECTOR('',#19859,1.); +#19859 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19860 = CYLINDRICAL_SURFACE('',#19861,0.31); +#19861 = AXIS2_PLACEMENT_3D('',#19862,#19863,#19864); +#19862 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#19863 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19864 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#19865 = ADVANCED_FACE('',(#19866),#19872,.F.); +#19866 = FACE_BOUND('',#19867,.F.); +#19867 = EDGE_LOOP('',(#19868,#19869,#19870,#19871)); +#19868 = ORIENTED_EDGE('',*,*,#18266,.T.); +#19869 = ORIENTED_EDGE('',*,*,#18284,.T.); +#19870 = ORIENTED_EDGE('',*,*,#19855,.F.); +#19871 = ORIENTED_EDGE('',*,*,#18182,.F.); +#19872 = PLANE('',#19873); +#19873 = AXIS2_PLACEMENT_3D('',#19874,#19875,#19876); +#19874 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#19875 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#19876 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#19877 = ADVANCED_FACE('',(#19878),#19889,.T.); +#19878 = FACE_BOUND('',#19879,.T.); +#19879 = EDGE_LOOP('',(#19880,#19881,#19882,#19883)); +#19880 = ORIENTED_EDGE('',*,*,#18444,.T.); +#19881 = ORIENTED_EDGE('',*,*,#19159,.T.); +#19882 = ORIENTED_EDGE('',*,*,#18553,.F.); +#19883 = ORIENTED_EDGE('',*,*,#19884,.F.); +#19884 = EDGE_CURVE('',#18437,#18546,#19885,.T.); +#19885 = LINE('',#19886,#19887); +#19886 = CARTESIAN_POINT('',(2.555290403434,0.84,0.648830935077)); +#19887 = VECTOR('',#19888,1.); +#19888 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19889 = CYLINDRICAL_SURFACE('',#19890,0.31); +#19890 = AXIS2_PLACEMENT_3D('',#19891,#19892,#19893); +#19891 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#19892 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19893 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#19894 = ADVANCED_FACE('',(#19895),#19906,.F.); +#19895 = FACE_BOUND('',#19896,.F.); +#19896 = EDGE_LOOP('',(#19897,#19903,#19904,#19905)); +#19897 = ORIENTED_EDGE('',*,*,#19898,.T.); +#19898 = EDGE_CURVE('',#18428,#18537,#19899,.T.); +#19899 = LINE('',#19900,#19901); +#19900 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#19901 = VECTOR('',#19902,1.); +#19902 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19903 = ORIENTED_EDGE('',*,*,#18545,.T.); +#19904 = ORIENTED_EDGE('',*,*,#19884,.F.); +#19905 = ORIENTED_EDGE('',*,*,#18436,.F.); +#19906 = PLANE('',#19907); +#19907 = AXIS2_PLACEMENT_3D('',#19908,#19909,#19910); +#19908 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#19909 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#19910 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#19911 = ADVANCED_FACE('',(#19912),#19923,.F.); +#19912 = FACE_BOUND('',#19913,.F.); +#19913 = EDGE_LOOP('',(#19914,#19920,#19921,#19922)); +#19914 = ORIENTED_EDGE('',*,*,#19915,.T.); +#19915 = EDGE_CURVE('',#18420,#18529,#19916,.T.); +#19916 = LINE('',#19917,#19918); +#19917 = CARTESIAN_POINT('',(2.710253189502,0.84,0.21)); +#19918 = VECTOR('',#19919,1.); +#19919 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19920 = ORIENTED_EDGE('',*,*,#18536,.T.); +#19921 = ORIENTED_EDGE('',*,*,#19898,.F.); +#19922 = ORIENTED_EDGE('',*,*,#18427,.F.); +#19923 = CYLINDRICAL_SURFACE('',#19924,0.1); +#19924 = AXIS2_PLACEMENT_3D('',#19925,#19926,#19927); +#19925 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#19926 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19927 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#19928 = ADVANCED_FACE('',(#19929),#19940,.F.); +#19929 = FACE_BOUND('',#19930,.F.); +#19930 = EDGE_LOOP('',(#19931,#19937,#19938,#19939)); +#19931 = ORIENTED_EDGE('',*,*,#19932,.T.); +#19932 = EDGE_CURVE('',#18412,#18521,#19933,.T.); +#19933 = LINE('',#19934,#19935); +#19934 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#19935 = VECTOR('',#19936,1.); +#19936 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19937 = ORIENTED_EDGE('',*,*,#18528,.T.); +#19938 = ORIENTED_EDGE('',*,*,#19915,.F.); +#19939 = ORIENTED_EDGE('',*,*,#18419,.F.); +#19940 = PLANE('',#19941); +#19941 = AXIS2_PLACEMENT_3D('',#19942,#19943,#19944); +#19942 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#19943 = DIRECTION('',(0.,0.,-1.)); +#19944 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19945 = ADVANCED_FACE('',(#19946),#19957,.F.); +#19946 = FACE_BOUND('',#19947,.F.); +#19947 = EDGE_LOOP('',(#19948,#19954,#19955,#19956)); +#19948 = ORIENTED_EDGE('',*,*,#19949,.T.); +#19949 = EDGE_CURVE('',#18404,#18513,#19950,.T.); +#19950 = LINE('',#19951,#19952); +#19951 = CARTESIAN_POINT('',(3.,0.84,0.)); +#19952 = VECTOR('',#19953,1.); +#19953 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19954 = ORIENTED_EDGE('',*,*,#18520,.T.); +#19955 = ORIENTED_EDGE('',*,*,#19932,.F.); +#19956 = ORIENTED_EDGE('',*,*,#18411,.F.); +#19957 = PLANE('',#19958); +#19958 = AXIS2_PLACEMENT_3D('',#19959,#19960,#19961); +#19959 = CARTESIAN_POINT('',(3.,0.84,0.)); +#19960 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19961 = DIRECTION('',(0.,0.,1.)); +#19962 = ADVANCED_FACE('',(#19963),#19974,.F.); +#19963 = FACE_BOUND('',#19964,.F.); +#19964 = EDGE_LOOP('',(#19965,#19971,#19972,#19973)); +#19965 = ORIENTED_EDGE('',*,*,#19966,.T.); +#19966 = EDGE_CURVE('',#18395,#18504,#19967,.T.); +#19967 = LINE('',#19968,#19969); +#19968 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#19969 = VECTOR('',#19970,1.); +#19970 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19971 = ORIENTED_EDGE('',*,*,#18512,.T.); +#19972 = ORIENTED_EDGE('',*,*,#19949,.F.); +#19973 = ORIENTED_EDGE('',*,*,#18403,.F.); +#19974 = PLANE('',#19975); +#19975 = AXIS2_PLACEMENT_3D('',#19976,#19977,#19978); +#19976 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#19977 = DIRECTION('',(0.,0.,1.)); +#19978 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#19979 = ADVANCED_FACE('',(#19980),#19991,.T.); +#19980 = FACE_BOUND('',#19981,.T.); +#19981 = EDGE_LOOP('',(#19982,#19983,#19984,#19985)); +#19982 = ORIENTED_EDGE('',*,*,#18394,.T.); +#19983 = ORIENTED_EDGE('',*,*,#19966,.T.); +#19984 = ORIENTED_EDGE('',*,*,#18503,.F.); +#19985 = ORIENTED_EDGE('',*,*,#19986,.F.); +#19986 = EDGE_CURVE('',#18387,#18496,#19987,.T.); +#19987 = LINE('',#19988,#19989); +#19988 = CARTESIAN_POINT('',(2.404962786068,0.84,0.256169064923)); +#19989 = VECTOR('',#19990,1.); +#19990 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19991 = CYLINDRICAL_SURFACE('',#19992,0.31); +#19992 = AXIS2_PLACEMENT_3D('',#19993,#19994,#19995); +#19993 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#19994 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19995 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#19996 = ADVANCED_FACE('',(#19997),#20003,.F.); +#19997 = FACE_BOUND('',#19998,.F.); +#19998 = EDGE_LOOP('',(#19999,#20000,#20001,#20002)); +#19999 = ORIENTED_EDGE('',*,*,#18477,.T.); +#20000 = ORIENTED_EDGE('',*,*,#18495,.T.); +#20001 = ORIENTED_EDGE('',*,*,#19986,.F.); +#20002 = ORIENTED_EDGE('',*,*,#18386,.F.); +#20003 = PLANE('',#20004); +#20004 = AXIS2_PLACEMENT_3D('',#20005,#20006,#20007); +#20005 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#20006 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#20007 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#20008 = ADVANCED_FACE('',(#20009),#20020,.T.); +#20009 = FACE_BOUND('',#20010,.T.); +#20010 = EDGE_LOOP('',(#20011,#20012,#20013,#20014)); +#20011 = ORIENTED_EDGE('',*,*,#18667,.T.); +#20012 = ORIENTED_EDGE('',*,*,#19178,.T.); +#20013 = ORIENTED_EDGE('',*,*,#18776,.F.); +#20014 = ORIENTED_EDGE('',*,*,#20015,.F.); +#20015 = EDGE_CURVE('',#18660,#18769,#20016,.T.); +#20016 = LINE('',#20017,#20018); +#20017 = CARTESIAN_POINT('',(2.555290403434,-0.43,0.648830935077)); +#20018 = VECTOR('',#20019,1.); +#20019 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20020 = CYLINDRICAL_SURFACE('',#20021,0.31); +#20021 = AXIS2_PLACEMENT_3D('',#20022,#20023,#20024); +#20022 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#20023 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20024 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#20025 = ADVANCED_FACE('',(#20026),#20037,.F.); +#20026 = FACE_BOUND('',#20027,.F.); +#20027 = EDGE_LOOP('',(#20028,#20034,#20035,#20036)); +#20028 = ORIENTED_EDGE('',*,*,#20029,.T.); +#20029 = EDGE_CURVE('',#18651,#18760,#20030,.T.); +#20030 = LINE('',#20031,#20032); +#20031 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#20032 = VECTOR('',#20033,1.); +#20033 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20034 = ORIENTED_EDGE('',*,*,#18768,.T.); +#20035 = ORIENTED_EDGE('',*,*,#20015,.F.); +#20036 = ORIENTED_EDGE('',*,*,#18659,.F.); +#20037 = PLANE('',#20038); +#20038 = AXIS2_PLACEMENT_3D('',#20039,#20040,#20041); +#20039 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#20040 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#20041 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#20042 = ADVANCED_FACE('',(#20043),#20054,.F.); +#20043 = FACE_BOUND('',#20044,.F.); +#20044 = EDGE_LOOP('',(#20045,#20051,#20052,#20053)); +#20045 = ORIENTED_EDGE('',*,*,#20046,.T.); +#20046 = EDGE_CURVE('',#18643,#18752,#20047,.T.); +#20047 = LINE('',#20048,#20049); +#20048 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.21)); +#20049 = VECTOR('',#20050,1.); +#20050 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20051 = ORIENTED_EDGE('',*,*,#18759,.T.); +#20052 = ORIENTED_EDGE('',*,*,#20029,.F.); +#20053 = ORIENTED_EDGE('',*,*,#18650,.F.); +#20054 = CYLINDRICAL_SURFACE('',#20055,0.1); +#20055 = AXIS2_PLACEMENT_3D('',#20056,#20057,#20058); +#20056 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#20057 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20058 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#20059 = ADVANCED_FACE('',(#20060),#20071,.F.); +#20060 = FACE_BOUND('',#20061,.F.); +#20061 = EDGE_LOOP('',(#20062,#20068,#20069,#20070)); +#20062 = ORIENTED_EDGE('',*,*,#20063,.T.); +#20063 = EDGE_CURVE('',#18635,#18744,#20064,.T.); +#20064 = LINE('',#20065,#20066); +#20065 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#20066 = VECTOR('',#20067,1.); +#20067 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20068 = ORIENTED_EDGE('',*,*,#18751,.T.); +#20069 = ORIENTED_EDGE('',*,*,#20046,.F.); +#20070 = ORIENTED_EDGE('',*,*,#18642,.F.); +#20071 = PLANE('',#20072); +#20072 = AXIS2_PLACEMENT_3D('',#20073,#20074,#20075); +#20073 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#20074 = DIRECTION('',(0.,0.,-1.)); +#20075 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#20076 = ADVANCED_FACE('',(#20077),#20088,.F.); +#20077 = FACE_BOUND('',#20078,.F.); +#20078 = EDGE_LOOP('',(#20079,#20085,#20086,#20087)); +#20079 = ORIENTED_EDGE('',*,*,#20080,.T.); +#20080 = EDGE_CURVE('',#18627,#18736,#20081,.T.); +#20081 = LINE('',#20082,#20083); +#20082 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#20083 = VECTOR('',#20084,1.); +#20084 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20085 = ORIENTED_EDGE('',*,*,#18743,.T.); +#20086 = ORIENTED_EDGE('',*,*,#20063,.F.); +#20087 = ORIENTED_EDGE('',*,*,#18634,.F.); +#20088 = PLANE('',#20089); +#20089 = AXIS2_PLACEMENT_3D('',#20090,#20091,#20092); +#20090 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#20091 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#20092 = DIRECTION('',(0.,0.,1.)); +#20093 = ADVANCED_FACE('',(#20094),#20105,.F.); +#20094 = FACE_BOUND('',#20095,.F.); +#20095 = EDGE_LOOP('',(#20096,#20102,#20103,#20104)); +#20096 = ORIENTED_EDGE('',*,*,#20097,.T.); +#20097 = EDGE_CURVE('',#18618,#18727,#20098,.T.); +#20098 = LINE('',#20099,#20100); +#20099 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#20100 = VECTOR('',#20101,1.); +#20101 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20102 = ORIENTED_EDGE('',*,*,#18735,.T.); +#20103 = ORIENTED_EDGE('',*,*,#20080,.F.); +#20104 = ORIENTED_EDGE('',*,*,#18626,.F.); +#20105 = PLANE('',#20106); +#20106 = AXIS2_PLACEMENT_3D('',#20107,#20108,#20109); +#20107 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#20108 = DIRECTION('',(0.,0.,1.)); +#20109 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#20110 = ADVANCED_FACE('',(#20111),#20122,.T.); +#20111 = FACE_BOUND('',#20112,.T.); +#20112 = EDGE_LOOP('',(#20113,#20114,#20115,#20116)); +#20113 = ORIENTED_EDGE('',*,*,#18617,.T.); +#20114 = ORIENTED_EDGE('',*,*,#20097,.T.); +#20115 = ORIENTED_EDGE('',*,*,#18726,.F.); +#20116 = ORIENTED_EDGE('',*,*,#20117,.F.); +#20117 = EDGE_CURVE('',#18610,#18719,#20118,.T.); +#20118 = LINE('',#20119,#20120); +#20119 = CARTESIAN_POINT('',(2.404962786068,-0.43,0.256169064923)); +#20120 = VECTOR('',#20121,1.); +#20121 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20122 = CYLINDRICAL_SURFACE('',#20123,0.31); +#20123 = AXIS2_PLACEMENT_3D('',#20124,#20125,#20126); +#20124 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#20125 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20126 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#20127 = ADVANCED_FACE('',(#20128),#20134,.F.); +#20128 = FACE_BOUND('',#20129,.F.); +#20129 = EDGE_LOOP('',(#20130,#20131,#20132,#20133)); +#20130 = ORIENTED_EDGE('',*,*,#18700,.T.); +#20131 = ORIENTED_EDGE('',*,*,#18718,.T.); +#20132 = ORIENTED_EDGE('',*,*,#20117,.F.); +#20133 = ORIENTED_EDGE('',*,*,#18609,.F.); +#20134 = PLANE('',#20135); +#20135 = AXIS2_PLACEMENT_3D('',#20136,#20137,#20138); +#20136 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#20137 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#20138 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#20139 = ADVANCED_FACE('',(#20140),#20151,.T.); +#20140 = FACE_BOUND('',#20141,.T.); +#20141 = EDGE_LOOP('',(#20142,#20143,#20144,#20145)); +#20142 = ORIENTED_EDGE('',*,*,#18890,.T.); +#20143 = ORIENTED_EDGE('',*,*,#19197,.T.); +#20144 = ORIENTED_EDGE('',*,*,#18999,.F.); +#20145 = ORIENTED_EDGE('',*,*,#20146,.F.); +#20146 = EDGE_CURVE('',#18883,#18992,#20147,.T.); +#20147 = LINE('',#20148,#20149); +#20148 = CARTESIAN_POINT('',(2.555290403434,-1.7,0.648830935077)); +#20149 = VECTOR('',#20150,1.); +#20150 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20151 = CYLINDRICAL_SURFACE('',#20152,0.31); +#20152 = AXIS2_PLACEMENT_3D('',#20153,#20154,#20155); +#20153 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#20154 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20155 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#20156 = ADVANCED_FACE('',(#20157),#20168,.F.); +#20157 = FACE_BOUND('',#20158,.F.); +#20158 = EDGE_LOOP('',(#20159,#20165,#20166,#20167)); +#20159 = ORIENTED_EDGE('',*,*,#20160,.T.); +#20160 = EDGE_CURVE('',#18874,#18983,#20161,.T.); +#20161 = LINE('',#20162,#20163); +#20162 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#20163 = VECTOR('',#20164,1.); +#20164 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20165 = ORIENTED_EDGE('',*,*,#18991,.T.); +#20166 = ORIENTED_EDGE('',*,*,#20146,.F.); +#20167 = ORIENTED_EDGE('',*,*,#18882,.F.); +#20168 = PLANE('',#20169); +#20169 = AXIS2_PLACEMENT_3D('',#20170,#20171,#20172); +#20170 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#20171 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#20172 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#20173 = ADVANCED_FACE('',(#20174),#20185,.F.); +#20174 = FACE_BOUND('',#20175,.F.); +#20175 = EDGE_LOOP('',(#20176,#20182,#20183,#20184)); +#20176 = ORIENTED_EDGE('',*,*,#20177,.T.); +#20177 = EDGE_CURVE('',#18866,#18975,#20178,.T.); +#20178 = LINE('',#20179,#20180); +#20179 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.21)); +#20180 = VECTOR('',#20181,1.); +#20181 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20182 = ORIENTED_EDGE('',*,*,#18982,.T.); +#20183 = ORIENTED_EDGE('',*,*,#20160,.F.); +#20184 = ORIENTED_EDGE('',*,*,#18873,.F.); +#20185 = CYLINDRICAL_SURFACE('',#20186,0.1); +#20186 = AXIS2_PLACEMENT_3D('',#20187,#20188,#20189); +#20187 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#20188 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20189 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#20190 = ADVANCED_FACE('',(#20191),#20202,.F.); +#20191 = FACE_BOUND('',#20192,.F.); +#20192 = EDGE_LOOP('',(#20193,#20199,#20200,#20201)); +#20193 = ORIENTED_EDGE('',*,*,#20194,.T.); +#20194 = EDGE_CURVE('',#18858,#18967,#20195,.T.); +#20195 = LINE('',#20196,#20197); +#20196 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#20197 = VECTOR('',#20198,1.); +#20198 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20199 = ORIENTED_EDGE('',*,*,#18974,.T.); +#20200 = ORIENTED_EDGE('',*,*,#20177,.F.); +#20201 = ORIENTED_EDGE('',*,*,#18865,.F.); +#20202 = PLANE('',#20203); +#20203 = AXIS2_PLACEMENT_3D('',#20204,#20205,#20206); +#20204 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#20205 = DIRECTION('',(0.,0.,-1.)); +#20206 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#20207 = ADVANCED_FACE('',(#20208),#20219,.F.); +#20208 = FACE_BOUND('',#20209,.F.); +#20209 = EDGE_LOOP('',(#20210,#20216,#20217,#20218)); +#20210 = ORIENTED_EDGE('',*,*,#20211,.T.); +#20211 = EDGE_CURVE('',#18850,#18959,#20212,.T.); +#20212 = LINE('',#20213,#20214); +#20213 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#20214 = VECTOR('',#20215,1.); +#20215 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20216 = ORIENTED_EDGE('',*,*,#18966,.T.); +#20217 = ORIENTED_EDGE('',*,*,#20194,.F.); +#20218 = ORIENTED_EDGE('',*,*,#18857,.F.); +#20219 = PLANE('',#20220); +#20220 = AXIS2_PLACEMENT_3D('',#20221,#20222,#20223); +#20221 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#20222 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#20223 = DIRECTION('',(0.,0.,1.)); +#20224 = ADVANCED_FACE('',(#20225),#20236,.F.); +#20225 = FACE_BOUND('',#20226,.F.); +#20226 = EDGE_LOOP('',(#20227,#20233,#20234,#20235)); +#20227 = ORIENTED_EDGE('',*,*,#20228,.T.); +#20228 = EDGE_CURVE('',#18841,#18950,#20229,.T.); +#20229 = LINE('',#20230,#20231); +#20230 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#20231 = VECTOR('',#20232,1.); +#20232 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20233 = ORIENTED_EDGE('',*,*,#18958,.T.); +#20234 = ORIENTED_EDGE('',*,*,#20211,.F.); +#20235 = ORIENTED_EDGE('',*,*,#18849,.F.); +#20236 = PLANE('',#20237); +#20237 = AXIS2_PLACEMENT_3D('',#20238,#20239,#20240); +#20238 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#20239 = DIRECTION('',(0.,0.,1.)); +#20240 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#20241 = ADVANCED_FACE('',(#20242),#20253,.T.); +#20242 = FACE_BOUND('',#20243,.T.); +#20243 = EDGE_LOOP('',(#20244,#20245,#20246,#20247)); +#20244 = ORIENTED_EDGE('',*,*,#18840,.T.); +#20245 = ORIENTED_EDGE('',*,*,#20228,.T.); +#20246 = ORIENTED_EDGE('',*,*,#18949,.F.); +#20247 = ORIENTED_EDGE('',*,*,#20248,.F.); +#20248 = EDGE_CURVE('',#18833,#18942,#20249,.T.); +#20249 = LINE('',#20250,#20251); +#20250 = CARTESIAN_POINT('',(2.404962786068,-1.7,0.256169064923)); +#20251 = VECTOR('',#20252,1.); +#20252 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20253 = CYLINDRICAL_SURFACE('',#20254,0.31); +#20254 = AXIS2_PLACEMENT_3D('',#20255,#20256,#20257); +#20255 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#20256 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20257 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#20258 = ADVANCED_FACE('',(#20259),#20265,.F.); +#20259 = FACE_BOUND('',#20260,.F.); +#20260 = EDGE_LOOP('',(#20261,#20262,#20263,#20264)); +#20261 = ORIENTED_EDGE('',*,*,#18923,.T.); +#20262 = ORIENTED_EDGE('',*,*,#18941,.T.); +#20263 = ORIENTED_EDGE('',*,*,#20248,.F.); +#20264 = ORIENTED_EDGE('',*,*,#18832,.F.); +#20265 = PLANE('',#20266); +#20266 = AXIS2_PLACEMENT_3D('',#20267,#20268,#20269); +#20267 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#20268 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#20269 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#20270 = ADVANCED_FACE('',(#20271),#20274,.F.); +#20271 = FACE_BOUND('',#20272,.T.); +#20272 = EDGE_LOOP('',(#20273)); +#20273 = ORIENTED_EDGE('',*,*,#19125,.F.); +#20274 = PLANE('',#20275); +#20275 = AXIS2_PLACEMENT_3D('',#20276,#20277,#20278); +#20276 = CARTESIAN_POINT('',(-1.197342035991,1.697342035991,1.55)); +#20277 = DIRECTION('',(0.,0.,-1.)); +#20278 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20283)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20280,#20281,#20282)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20280 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20281 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20282 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20283 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20280, + 'distance_accuracy_value','confusion accuracy'); +#20284 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20285,#20287); +#20285 = ( REPRESENTATION_RELATIONSHIP('','',#15666,#15643) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20286) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20286 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15644); +#20287 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20288); +#20288 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('18','=>[0:1:1:17]','',#15638, + #15661,$); +#20289 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#15663)); +#20290 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20291,#20293); +#20291 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20292) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20292 = ITEM_DEFINED_TRANSFORMATION('','',#11,#59); +#20293 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20294); +#20294 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('20','DB1','',#5,#10415,$); +#20295 = SHAPE_DEFINITION_REPRESENTATION(#20296,#20302); +#20296 = PRODUCT_DEFINITION_SHAPE('','',#20297); +#20297 = PRODUCT_DEFINITION('design','',#20298,#20301); +#20298 = PRODUCT_DEFINITION_FORMATION('','',#20299); +#20299 = PRODUCT('PinSocket_1x20_P2.54mm_Vertical', + 'PinSocket_1x20_P2.54mm_Vertical','',(#20300)); +#20300 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20301 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20302 = SHAPE_REPRESENTATION('',(#11,#20303),#20307); +#20303 = AXIS2_PLACEMENT_3D('',#20304,#20305,#20306); +#20304 = CARTESIAN_POINT('',(0.,0.,0.)); +#20305 = DIRECTION('',(0.,0.,1.)); +#20306 = DIRECTION('',(1.,0.,-0.)); +#20307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20311)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20308,#20309,#20310)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20308 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20309 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20310 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20311 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20308, + 'distance_accuracy_value','confusion accuracy'); +#20312 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20313,#20315); +#20313 = ( REPRESENTATION_RELATIONSHIP('','',#20302,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20314) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20314 = ITEM_DEFINED_TRANSFORMATION('','',#11,#63); +#20315 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20316); +#20316 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('22','J1','',#5,#20297,$); +#20317 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20299)); +#20318 = SHAPE_DEFINITION_REPRESENTATION(#20319,#20325); +#20319 = PRODUCT_DEFINITION_SHAPE('','',#20320); +#20320 = PRODUCT_DEFINITION('design','',#20321,#20324); +#20321 = PRODUCT_DEFINITION_FORMATION('','',#20322); +#20322 = PRODUCT('PinSocket_1x20_P2.54mm_Vertical', + 'PinSocket_1x20_P2.54mm_Vertical','',(#20323)); +#20323 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20324 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20325 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#20326),#36128); +#20326 = MANIFOLD_SOLID_BREP('',#20327); +#20327 = CLOSED_SHELL('',(#20328,#20368,#20431,#20494,#20511,#21208, + #21230,#21247,#22584,#22596,#22608,#22639,#22663,#22687,#22704, + #22735,#22759,#22783,#22800,#22831,#22855,#22879,#22896,#22927, + #22951,#22975,#22992,#23023,#23047,#23071,#23088,#23119,#23143, + #23167,#23184,#23215,#23239,#23263,#23280,#23311,#23335,#23359, + #23376,#23407,#23431,#23455,#23472,#23503,#23527,#23551,#23568, + #23599,#23623,#23647,#23664,#23695,#23719,#23743,#23760,#23791, + #23815,#23839,#23856,#23887,#23911,#23935,#23952,#23983,#24007, + #24031,#24048,#24079,#24103,#24127,#24144,#24175,#24199,#24223, + #24240,#24271,#24295,#24319,#24336,#24367,#24391,#24415,#24432, + #24463,#24487,#24511,#24528,#24545,#24592,#24609,#24656,#24673, + #24720,#24737,#24784,#24801,#24848,#24865,#24912,#24929,#24976, + #24993,#25040,#25057,#25104,#25121,#25168,#25185,#25232,#25249, + #25296,#25313,#25360,#25377,#25424,#25441,#25488,#25505,#25552, + #25569,#25616,#25633,#25680,#25697,#25744,#25761,#25808,#25825, + #25872,#25889,#25936,#25953,#26000,#26017,#26064,#26081,#26128, + #26145,#26192,#26209,#26256,#26273,#26320,#26337,#26384,#26401, + #26448,#26465,#26512,#26529,#26576,#26593,#26640,#26657,#26704, + #26721,#26768,#26785,#26832,#26849,#26896,#26913,#26960,#26977, + #27024,#27041,#27088,#27119,#27175,#27199,#27248,#27279,#27335, + #27359,#27408,#27439,#27495,#27519,#27568,#27599,#27655,#27679, + #27728,#27759,#27815,#27839,#27888,#27919,#27975,#27999,#28048, + #28079,#28135,#28159,#28208,#28239,#28295,#28319,#28368,#28399, + #28455,#28479,#28528,#28559,#28615,#28639,#28688,#28719,#28775, + #28799,#28848,#28879,#28935,#28959,#29008,#29039,#29095,#29119, + #29168,#29199,#29255,#29279,#29328,#29359,#29415,#29439,#29488, + #29519,#29575,#29599,#29648,#29679,#29735,#29759,#29808,#29839, + #29895,#29919,#29968,#29999,#30055,#30079,#30128,#30159,#30215, + #30239,#30288,#30305,#30322,#30339,#30356,#30368,#30385,#30402, + #30419,#30436,#30448,#30465,#30482,#30499,#30516,#30528,#30545, + #30562,#30579,#30596,#30608,#30625,#30642,#30659,#30676,#30688, + #30705,#30722,#30739,#30756,#30768,#30785,#30802,#30819,#30836, + #30848,#30865,#30882,#30899,#30916,#30928,#30945,#30962,#30979, + #30996,#31008,#31025,#31042,#31059,#31076,#31088,#31105,#31122, + #31139,#31156,#31168,#31185,#31202,#31219,#31236,#31248,#31265, + #31282,#31299,#31316,#31328,#31345,#31362,#31379,#31396,#31408, + #31425,#31442,#31459,#31476,#31488,#31505,#31522,#31539,#31556, + #31568,#31585,#31602,#31619,#31636,#31648,#31665,#31682,#31699, + #31716,#31728,#31745,#31762,#31779,#31796,#31808,#31825,#31842, + #31859,#31876,#31888,#31905,#31922,#31971,#31995,#32037,#32054, + #32071,#32088,#32137,#32161,#32203,#32220,#32237,#32254,#32303, + #32327,#32369,#32386,#32403,#32420,#32469,#32493,#32535,#32552, + #32569,#32586,#32635,#32659,#32701,#32718,#32735,#32752,#32801, + #32825,#32867,#32884,#32901,#32918,#32967,#32991,#33033,#33050, + #33067,#33084,#33133,#33157,#33199,#33216,#33233,#33250,#33299, + #33323,#33365,#33382,#33399,#33416,#33465,#33489,#33531,#33548, + #33565,#33582,#33631,#33655,#33697,#33714,#33731,#33748,#33797, + #33821,#33863,#33880,#33897,#33914,#33963,#33987,#34029,#34046, + #34063,#34080,#34129,#34153,#34195,#34212,#34229,#34246,#34295, + #34319,#34361,#34378,#34395,#34412,#34461,#34485,#34527,#34544, + #34561,#34578,#34627,#34651,#34693,#34710,#34727,#34744,#34793, + #34817,#34859,#34876,#34893,#34910,#34959,#34983,#35025,#35042, + #35059,#35076,#35125,#35149,#35191,#35208,#35225,#35242,#35254, + #35271,#35288,#35300,#35317,#35334,#35346,#35363,#35380,#35392, + #35409,#35426,#35438,#35455,#35472,#35484,#35501,#35518,#35530, + #35547,#35564,#35576,#35593,#35610,#35622,#35639,#35656,#35668, + #35685,#35702,#35714,#35731,#35748,#35760,#35777,#35794,#35806, + #35823,#35840,#35852,#35869,#35886,#35898,#35915,#35932,#35944, + #35961,#35978,#35990,#36007,#36024,#36036,#36053,#36070,#36082, + #36099,#36116)); +#20328 = ADVANCED_FACE('',(#20329),#20363,.F.); +#20329 = FACE_BOUND('',#20330,.F.); +#20330 = EDGE_LOOP('',(#20331,#20341,#20349,#20357)); +#20331 = ORIENTED_EDGE('',*,*,#20332,.T.); +#20332 = EDGE_CURVE('',#20333,#20335,#20337,.T.); +#20333 = VERTEX_POINT('',#20334); +#20334 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20335 = VERTEX_POINT('',#20336); +#20336 = CARTESIAN_POINT('',(1.27,-49.53,8.5)); +#20337 = LINE('',#20338,#20339); +#20338 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20339 = VECTOR('',#20340,1.); +#20340 = DIRECTION('',(0.,0.,1.)); +#20341 = ORIENTED_EDGE('',*,*,#20342,.T.); +#20342 = EDGE_CURVE('',#20335,#20343,#20345,.T.); +#20343 = VERTEX_POINT('',#20344); +#20344 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#20345 = LINE('',#20346,#20347); +#20346 = CARTESIAN_POINT('',(1.27,-49.53,8.5)); +#20347 = VECTOR('',#20348,1.); +#20348 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20349 = ORIENTED_EDGE('',*,*,#20350,.F.); +#20350 = EDGE_CURVE('',#20351,#20343,#20353,.T.); +#20351 = VERTEX_POINT('',#20352); +#20352 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20353 = LINE('',#20354,#20355); +#20354 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20355 = VECTOR('',#20356,1.); +#20356 = DIRECTION('',(0.,0.,1.)); +#20357 = ORIENTED_EDGE('',*,*,#20358,.F.); +#20358 = EDGE_CURVE('',#20333,#20351,#20359,.T.); +#20359 = LINE('',#20360,#20361); +#20360 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20361 = VECTOR('',#20362,1.); +#20362 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20363 = PLANE('',#20364); +#20364 = AXIS2_PLACEMENT_3D('',#20365,#20366,#20367); +#20365 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20366 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20367 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20368 = ADVANCED_FACE('',(#20369),#20426,.F.); +#20369 = FACE_BOUND('',#20370,.F.); +#20370 = EDGE_LOOP('',(#20371,#20381,#20389,#20395,#20396,#20404,#20412, + #20420)); +#20371 = ORIENTED_EDGE('',*,*,#20372,.F.); +#20372 = EDGE_CURVE('',#20373,#20375,#20377,.T.); +#20373 = VERTEX_POINT('',#20374); +#20374 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20375 = VERTEX_POINT('',#20376); +#20376 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.)); +#20377 = LINE('',#20378,#20379); +#20378 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20379 = VECTOR('',#20380,1.); +#20380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20381 = ORIENTED_EDGE('',*,*,#20382,.T.); +#20382 = EDGE_CURVE('',#20373,#20383,#20385,.T.); +#20383 = VERTEX_POINT('',#20384); +#20384 = CARTESIAN_POINT('',(-1.27,-49.53,8.5)); +#20385 = LINE('',#20386,#20387); +#20386 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20387 = VECTOR('',#20388,1.); +#20388 = DIRECTION('',(0.,0.,1.)); +#20389 = ORIENTED_EDGE('',*,*,#20390,.T.); +#20390 = EDGE_CURVE('',#20383,#20335,#20391,.T.); +#20391 = LINE('',#20392,#20393); +#20392 = CARTESIAN_POINT('',(-1.27,-49.53,8.5)); +#20393 = VECTOR('',#20394,1.); +#20394 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20395 = ORIENTED_EDGE('',*,*,#20332,.F.); +#20396 = ORIENTED_EDGE('',*,*,#20397,.F.); +#20397 = EDGE_CURVE('',#20398,#20333,#20400,.T.); +#20398 = VERTEX_POINT('',#20399); +#20399 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#20400 = LINE('',#20401,#20402); +#20401 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20402 = VECTOR('',#20403,1.); +#20403 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20404 = ORIENTED_EDGE('',*,*,#20405,.T.); +#20405 = EDGE_CURVE('',#20398,#20406,#20408,.T.); +#20406 = VERTEX_POINT('',#20407); +#20407 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.2)); +#20408 = LINE('',#20409,#20410); +#20409 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#20410 = VECTOR('',#20411,1.); +#20411 = DIRECTION('',(0.,0.,1.)); +#20412 = ORIENTED_EDGE('',*,*,#20413,.F.); +#20413 = EDGE_CURVE('',#20414,#20406,#20416,.T.); +#20414 = VERTEX_POINT('',#20415); +#20415 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.2)); +#20416 = LINE('',#20417,#20418); +#20417 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.2)); +#20418 = VECTOR('',#20419,1.); +#20419 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20420 = ORIENTED_EDGE('',*,*,#20421,.F.); +#20421 = EDGE_CURVE('',#20375,#20414,#20422,.T.); +#20422 = LINE('',#20423,#20424); +#20423 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.)); +#20424 = VECTOR('',#20425,1.); +#20425 = DIRECTION('',(0.,0.,1.)); +#20426 = PLANE('',#20427); +#20427 = AXIS2_PLACEMENT_3D('',#20428,#20429,#20430); +#20428 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20429 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20430 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20431 = ADVANCED_FACE('',(#20432),#20489,.F.); +#20432 = FACE_BOUND('',#20433,.F.); +#20433 = EDGE_LOOP('',(#20434,#20442,#20443,#20451,#20459,#20467,#20475, + #20483)); +#20434 = ORIENTED_EDGE('',*,*,#20435,.F.); +#20435 = EDGE_CURVE('',#20351,#20436,#20438,.T.); +#20436 = VERTEX_POINT('',#20437); +#20437 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#20438 = LINE('',#20439,#20440); +#20439 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20440 = VECTOR('',#20441,1.); +#20441 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20442 = ORIENTED_EDGE('',*,*,#20350,.T.); +#20443 = ORIENTED_EDGE('',*,*,#20444,.T.); +#20444 = EDGE_CURVE('',#20343,#20445,#20447,.T.); +#20445 = VERTEX_POINT('',#20446); +#20446 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#20447 = LINE('',#20448,#20449); +#20448 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#20449 = VECTOR('',#20450,1.); +#20450 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20451 = ORIENTED_EDGE('',*,*,#20452,.F.); +#20452 = EDGE_CURVE('',#20453,#20445,#20455,.T.); +#20453 = VERTEX_POINT('',#20454); +#20454 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#20455 = LINE('',#20456,#20457); +#20456 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#20457 = VECTOR('',#20458,1.); +#20458 = DIRECTION('',(0.,0.,1.)); +#20459 = ORIENTED_EDGE('',*,*,#20460,.F.); +#20460 = EDGE_CURVE('',#20461,#20453,#20463,.T.); +#20461 = VERTEX_POINT('',#20462); +#20462 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#20463 = LINE('',#20464,#20465); +#20464 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20465 = VECTOR('',#20466,1.); +#20466 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20467 = ORIENTED_EDGE('',*,*,#20468,.T.); +#20468 = EDGE_CURVE('',#20461,#20469,#20471,.T.); +#20469 = VERTEX_POINT('',#20470); +#20470 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#20471 = LINE('',#20472,#20473); +#20472 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#20473 = VECTOR('',#20474,1.); +#20474 = DIRECTION('',(0.,0.,1.)); +#20475 = ORIENTED_EDGE('',*,*,#20476,.F.); +#20476 = EDGE_CURVE('',#20477,#20469,#20479,.T.); +#20477 = VERTEX_POINT('',#20478); +#20478 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#20479 = LINE('',#20480,#20481); +#20480 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#20481 = VECTOR('',#20482,1.); +#20482 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20483 = ORIENTED_EDGE('',*,*,#20484,.F.); +#20484 = EDGE_CURVE('',#20436,#20477,#20485,.T.); +#20485 = LINE('',#20486,#20487); +#20486 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#20487 = VECTOR('',#20488,1.); +#20488 = DIRECTION('',(0.,0.,1.)); +#20489 = PLANE('',#20490); +#20490 = AXIS2_PLACEMENT_3D('',#20491,#20492,#20493); +#20491 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20492 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20493 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20494 = ADVANCED_FACE('',(#20495),#20506,.F.); +#20495 = FACE_BOUND('',#20496,.F.); +#20496 = EDGE_LOOP('',(#20497,#20498,#20499,#20500)); +#20497 = ORIENTED_EDGE('',*,*,#20397,.T.); +#20498 = ORIENTED_EDGE('',*,*,#20358,.T.); +#20499 = ORIENTED_EDGE('',*,*,#20435,.T.); +#20500 = ORIENTED_EDGE('',*,*,#20501,.F.); +#20501 = EDGE_CURVE('',#20398,#20436,#20502,.T.); +#20502 = LINE('',#20503,#20504); +#20503 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#20504 = VECTOR('',#20505,1.); +#20505 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20506 = PLANE('',#20507); +#20507 = AXIS2_PLACEMENT_3D('',#20508,#20509,#20510); +#20508 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,0.)); +#20509 = DIRECTION('',(0.,0.,1.)); +#20510 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#20511 = ADVANCED_FACE('',(#20512,#20523,#20557,#20591,#20625,#20659, + #20693,#20727,#20761,#20795,#20829,#20863,#20897,#20931,#20965, + #20999,#21033,#21067,#21101,#21135,#21169),#21203,.T.); +#20512 = FACE_BOUND('',#20513,.T.); +#20513 = EDGE_LOOP('',(#20514,#20515,#20516,#20522)); +#20514 = ORIENTED_EDGE('',*,*,#20342,.T.); +#20515 = ORIENTED_EDGE('',*,*,#20444,.T.); +#20516 = ORIENTED_EDGE('',*,*,#20517,.T.); +#20517 = EDGE_CURVE('',#20445,#20383,#20518,.T.); +#20518 = LINE('',#20519,#20520); +#20519 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#20520 = VECTOR('',#20521,1.); +#20521 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20522 = ORIENTED_EDGE('',*,*,#20390,.T.); +#20523 = FACE_BOUND('',#20524,.T.); +#20524 = EDGE_LOOP('',(#20525,#20535,#20543,#20551)); +#20525 = ORIENTED_EDGE('',*,*,#20526,.F.); +#20526 = EDGE_CURVE('',#20527,#20529,#20531,.T.); +#20527 = VERTEX_POINT('',#20528); +#20528 = CARTESIAN_POINT('',(0.6,-48.86,8.5)); +#20529 = VERTEX_POINT('',#20530); +#20530 = CARTESIAN_POINT('',(0.6,-47.66,8.5)); +#20531 = LINE('',#20532,#20533); +#20532 = CARTESIAN_POINT('',(0.6,-48.86,8.5)); +#20533 = VECTOR('',#20534,1.); +#20534 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20535 = ORIENTED_EDGE('',*,*,#20536,.F.); +#20536 = EDGE_CURVE('',#20537,#20527,#20539,.T.); +#20537 = VERTEX_POINT('',#20538); +#20538 = CARTESIAN_POINT('',(-0.6,-48.86,8.5)); +#20539 = LINE('',#20540,#20541); +#20540 = CARTESIAN_POINT('',(-0.6,-48.86,8.5)); +#20541 = VECTOR('',#20542,1.); +#20542 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20543 = ORIENTED_EDGE('',*,*,#20544,.F.); +#20544 = EDGE_CURVE('',#20545,#20537,#20547,.T.); +#20545 = VERTEX_POINT('',#20546); +#20546 = CARTESIAN_POINT('',(-0.6,-47.66,8.5)); +#20547 = LINE('',#20548,#20549); +#20548 = CARTESIAN_POINT('',(-0.6,-47.66,8.5)); +#20549 = VECTOR('',#20550,1.); +#20550 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20551 = ORIENTED_EDGE('',*,*,#20552,.F.); +#20552 = EDGE_CURVE('',#20529,#20545,#20553,.T.); +#20553 = LINE('',#20554,#20555); +#20554 = CARTESIAN_POINT('',(0.6,-47.66,8.5)); +#20555 = VECTOR('',#20556,1.); +#20556 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20557 = FACE_BOUND('',#20558,.T.); +#20558 = EDGE_LOOP('',(#20559,#20569,#20577,#20585)); +#20559 = ORIENTED_EDGE('',*,*,#20560,.F.); +#20560 = EDGE_CURVE('',#20561,#20563,#20565,.T.); +#20561 = VERTEX_POINT('',#20562); +#20562 = CARTESIAN_POINT('',(0.6,-46.32,8.5)); +#20563 = VERTEX_POINT('',#20564); +#20564 = CARTESIAN_POINT('',(0.6,-45.12,8.5)); +#20565 = LINE('',#20566,#20567); +#20566 = CARTESIAN_POINT('',(0.6,-46.32,8.5)); +#20567 = VECTOR('',#20568,1.); +#20568 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20569 = ORIENTED_EDGE('',*,*,#20570,.F.); +#20570 = EDGE_CURVE('',#20571,#20561,#20573,.T.); +#20571 = VERTEX_POINT('',#20572); +#20572 = CARTESIAN_POINT('',(-0.6,-46.32,8.5)); +#20573 = LINE('',#20574,#20575); +#20574 = CARTESIAN_POINT('',(-0.6,-46.32,8.5)); +#20575 = VECTOR('',#20576,1.); +#20576 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20577 = ORIENTED_EDGE('',*,*,#20578,.F.); +#20578 = EDGE_CURVE('',#20579,#20571,#20581,.T.); +#20579 = VERTEX_POINT('',#20580); +#20580 = CARTESIAN_POINT('',(-0.6,-45.12,8.5)); +#20581 = LINE('',#20582,#20583); +#20582 = CARTESIAN_POINT('',(-0.6,-45.12,8.5)); +#20583 = VECTOR('',#20584,1.); +#20584 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20585 = ORIENTED_EDGE('',*,*,#20586,.F.); +#20586 = EDGE_CURVE('',#20563,#20579,#20587,.T.); +#20587 = LINE('',#20588,#20589); +#20588 = CARTESIAN_POINT('',(0.6,-45.12,8.5)); +#20589 = VECTOR('',#20590,1.); +#20590 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20591 = FACE_BOUND('',#20592,.T.); +#20592 = EDGE_LOOP('',(#20593,#20603,#20611,#20619)); +#20593 = ORIENTED_EDGE('',*,*,#20594,.F.); +#20594 = EDGE_CURVE('',#20595,#20597,#20599,.T.); +#20595 = VERTEX_POINT('',#20596); +#20596 = CARTESIAN_POINT('',(0.6,-43.78,8.5)); +#20597 = VERTEX_POINT('',#20598); +#20598 = CARTESIAN_POINT('',(0.6,-42.58,8.5)); +#20599 = LINE('',#20600,#20601); +#20600 = CARTESIAN_POINT('',(0.6,-43.78,8.5)); +#20601 = VECTOR('',#20602,1.); +#20602 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20603 = ORIENTED_EDGE('',*,*,#20604,.F.); +#20604 = EDGE_CURVE('',#20605,#20595,#20607,.T.); +#20605 = VERTEX_POINT('',#20606); +#20606 = CARTESIAN_POINT('',(-0.6,-43.78,8.5)); +#20607 = LINE('',#20608,#20609); +#20608 = CARTESIAN_POINT('',(-0.6,-43.78,8.5)); +#20609 = VECTOR('',#20610,1.); +#20610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20611 = ORIENTED_EDGE('',*,*,#20612,.F.); +#20612 = EDGE_CURVE('',#20613,#20605,#20615,.T.); +#20613 = VERTEX_POINT('',#20614); +#20614 = CARTESIAN_POINT('',(-0.6,-42.58,8.5)); +#20615 = LINE('',#20616,#20617); +#20616 = CARTESIAN_POINT('',(-0.6,-42.58,8.5)); +#20617 = VECTOR('',#20618,1.); +#20618 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20619 = ORIENTED_EDGE('',*,*,#20620,.F.); +#20620 = EDGE_CURVE('',#20597,#20613,#20621,.T.); +#20621 = LINE('',#20622,#20623); +#20622 = CARTESIAN_POINT('',(0.6,-42.58,8.5)); +#20623 = VECTOR('',#20624,1.); +#20624 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20625 = FACE_BOUND('',#20626,.T.); +#20626 = EDGE_LOOP('',(#20627,#20637,#20645,#20653)); +#20627 = ORIENTED_EDGE('',*,*,#20628,.F.); +#20628 = EDGE_CURVE('',#20629,#20631,#20633,.T.); +#20629 = VERTEX_POINT('',#20630); +#20630 = CARTESIAN_POINT('',(0.6,-41.24,8.5)); +#20631 = VERTEX_POINT('',#20632); +#20632 = CARTESIAN_POINT('',(0.6,-40.04,8.5)); +#20633 = LINE('',#20634,#20635); +#20634 = CARTESIAN_POINT('',(0.6,-41.24,8.5)); +#20635 = VECTOR('',#20636,1.); +#20636 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20637 = ORIENTED_EDGE('',*,*,#20638,.F.); +#20638 = EDGE_CURVE('',#20639,#20629,#20641,.T.); +#20639 = VERTEX_POINT('',#20640); +#20640 = CARTESIAN_POINT('',(-0.6,-41.24,8.5)); +#20641 = LINE('',#20642,#20643); +#20642 = CARTESIAN_POINT('',(-0.6,-41.24,8.5)); +#20643 = VECTOR('',#20644,1.); +#20644 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20645 = ORIENTED_EDGE('',*,*,#20646,.F.); +#20646 = EDGE_CURVE('',#20647,#20639,#20649,.T.); +#20647 = VERTEX_POINT('',#20648); +#20648 = CARTESIAN_POINT('',(-0.6,-40.04,8.5)); +#20649 = LINE('',#20650,#20651); +#20650 = CARTESIAN_POINT('',(-0.6,-40.04,8.5)); +#20651 = VECTOR('',#20652,1.); +#20652 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20653 = ORIENTED_EDGE('',*,*,#20654,.F.); +#20654 = EDGE_CURVE('',#20631,#20647,#20655,.T.); +#20655 = LINE('',#20656,#20657); +#20656 = CARTESIAN_POINT('',(0.6,-40.04,8.5)); +#20657 = VECTOR('',#20658,1.); +#20658 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20659 = FACE_BOUND('',#20660,.T.); +#20660 = EDGE_LOOP('',(#20661,#20671,#20679,#20687)); +#20661 = ORIENTED_EDGE('',*,*,#20662,.F.); +#20662 = EDGE_CURVE('',#20663,#20665,#20667,.T.); +#20663 = VERTEX_POINT('',#20664); +#20664 = CARTESIAN_POINT('',(0.6,-38.7,8.5)); +#20665 = VERTEX_POINT('',#20666); +#20666 = CARTESIAN_POINT('',(0.6,-37.5,8.5)); +#20667 = LINE('',#20668,#20669); +#20668 = CARTESIAN_POINT('',(0.6,-38.7,8.5)); +#20669 = VECTOR('',#20670,1.); +#20670 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20671 = ORIENTED_EDGE('',*,*,#20672,.F.); +#20672 = EDGE_CURVE('',#20673,#20663,#20675,.T.); +#20673 = VERTEX_POINT('',#20674); +#20674 = CARTESIAN_POINT('',(-0.6,-38.7,8.5)); +#20675 = LINE('',#20676,#20677); +#20676 = CARTESIAN_POINT('',(-0.6,-38.7,8.5)); +#20677 = VECTOR('',#20678,1.); +#20678 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20679 = ORIENTED_EDGE('',*,*,#20680,.F.); +#20680 = EDGE_CURVE('',#20681,#20673,#20683,.T.); +#20681 = VERTEX_POINT('',#20682); +#20682 = CARTESIAN_POINT('',(-0.6,-37.5,8.5)); +#20683 = LINE('',#20684,#20685); +#20684 = CARTESIAN_POINT('',(-0.6,-37.5,8.5)); +#20685 = VECTOR('',#20686,1.); +#20686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20687 = ORIENTED_EDGE('',*,*,#20688,.F.); +#20688 = EDGE_CURVE('',#20665,#20681,#20689,.T.); +#20689 = LINE('',#20690,#20691); +#20690 = CARTESIAN_POINT('',(0.6,-37.5,8.5)); +#20691 = VECTOR('',#20692,1.); +#20692 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20693 = FACE_BOUND('',#20694,.T.); +#20694 = EDGE_LOOP('',(#20695,#20705,#20713,#20721)); +#20695 = ORIENTED_EDGE('',*,*,#20696,.F.); +#20696 = EDGE_CURVE('',#20697,#20699,#20701,.T.); +#20697 = VERTEX_POINT('',#20698); +#20698 = CARTESIAN_POINT('',(0.6,-36.16,8.5)); +#20699 = VERTEX_POINT('',#20700); +#20700 = CARTESIAN_POINT('',(0.6,-34.96,8.5)); +#20701 = LINE('',#20702,#20703); +#20702 = CARTESIAN_POINT('',(0.6,-36.16,8.5)); +#20703 = VECTOR('',#20704,1.); +#20704 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20705 = ORIENTED_EDGE('',*,*,#20706,.F.); +#20706 = EDGE_CURVE('',#20707,#20697,#20709,.T.); +#20707 = VERTEX_POINT('',#20708); +#20708 = CARTESIAN_POINT('',(-0.6,-36.16,8.5)); +#20709 = LINE('',#20710,#20711); +#20710 = CARTESIAN_POINT('',(-0.6,-36.16,8.5)); +#20711 = VECTOR('',#20712,1.); +#20712 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20713 = ORIENTED_EDGE('',*,*,#20714,.F.); +#20714 = EDGE_CURVE('',#20715,#20707,#20717,.T.); +#20715 = VERTEX_POINT('',#20716); +#20716 = CARTESIAN_POINT('',(-0.6,-34.96,8.5)); +#20717 = LINE('',#20718,#20719); +#20718 = CARTESIAN_POINT('',(-0.6,-34.96,8.5)); +#20719 = VECTOR('',#20720,1.); +#20720 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20721 = ORIENTED_EDGE('',*,*,#20722,.F.); +#20722 = EDGE_CURVE('',#20699,#20715,#20723,.T.); +#20723 = LINE('',#20724,#20725); +#20724 = CARTESIAN_POINT('',(0.6,-34.96,8.5)); +#20725 = VECTOR('',#20726,1.); +#20726 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20727 = FACE_BOUND('',#20728,.T.); +#20728 = EDGE_LOOP('',(#20729,#20739,#20747,#20755)); +#20729 = ORIENTED_EDGE('',*,*,#20730,.F.); +#20730 = EDGE_CURVE('',#20731,#20733,#20735,.T.); +#20731 = VERTEX_POINT('',#20732); +#20732 = CARTESIAN_POINT('',(0.6,-33.62,8.5)); +#20733 = VERTEX_POINT('',#20734); +#20734 = CARTESIAN_POINT('',(0.6,-32.42,8.5)); +#20735 = LINE('',#20736,#20737); +#20736 = CARTESIAN_POINT('',(0.6,-33.62,8.5)); +#20737 = VECTOR('',#20738,1.); +#20738 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20739 = ORIENTED_EDGE('',*,*,#20740,.F.); +#20740 = EDGE_CURVE('',#20741,#20731,#20743,.T.); +#20741 = VERTEX_POINT('',#20742); +#20742 = CARTESIAN_POINT('',(-0.6,-33.62,8.5)); +#20743 = LINE('',#20744,#20745); +#20744 = CARTESIAN_POINT('',(-0.6,-33.62,8.5)); +#20745 = VECTOR('',#20746,1.); +#20746 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20747 = ORIENTED_EDGE('',*,*,#20748,.F.); +#20748 = EDGE_CURVE('',#20749,#20741,#20751,.T.); +#20749 = VERTEX_POINT('',#20750); +#20750 = CARTESIAN_POINT('',(-0.6,-32.42,8.5)); +#20751 = LINE('',#20752,#20753); +#20752 = CARTESIAN_POINT('',(-0.6,-32.42,8.5)); +#20753 = VECTOR('',#20754,1.); +#20754 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20755 = ORIENTED_EDGE('',*,*,#20756,.F.); +#20756 = EDGE_CURVE('',#20733,#20749,#20757,.T.); +#20757 = LINE('',#20758,#20759); +#20758 = CARTESIAN_POINT('',(0.6,-32.42,8.5)); +#20759 = VECTOR('',#20760,1.); +#20760 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20761 = FACE_BOUND('',#20762,.T.); +#20762 = EDGE_LOOP('',(#20763,#20773,#20781,#20789)); +#20763 = ORIENTED_EDGE('',*,*,#20764,.F.); +#20764 = EDGE_CURVE('',#20765,#20767,#20769,.T.); +#20765 = VERTEX_POINT('',#20766); +#20766 = CARTESIAN_POINT('',(0.6,-31.08,8.5)); +#20767 = VERTEX_POINT('',#20768); +#20768 = CARTESIAN_POINT('',(0.6,-29.88,8.5)); +#20769 = LINE('',#20770,#20771); +#20770 = CARTESIAN_POINT('',(0.6,-31.08,8.5)); +#20771 = VECTOR('',#20772,1.); +#20772 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20773 = ORIENTED_EDGE('',*,*,#20774,.F.); +#20774 = EDGE_CURVE('',#20775,#20765,#20777,.T.); +#20775 = VERTEX_POINT('',#20776); +#20776 = CARTESIAN_POINT('',(-0.6,-31.08,8.5)); +#20777 = LINE('',#20778,#20779); +#20778 = CARTESIAN_POINT('',(-0.6,-31.08,8.5)); +#20779 = VECTOR('',#20780,1.); +#20780 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20781 = ORIENTED_EDGE('',*,*,#20782,.F.); +#20782 = EDGE_CURVE('',#20783,#20775,#20785,.T.); +#20783 = VERTEX_POINT('',#20784); +#20784 = CARTESIAN_POINT('',(-0.6,-29.88,8.5)); +#20785 = LINE('',#20786,#20787); +#20786 = CARTESIAN_POINT('',(-0.6,-29.88,8.5)); +#20787 = VECTOR('',#20788,1.); +#20788 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20789 = ORIENTED_EDGE('',*,*,#20790,.F.); +#20790 = EDGE_CURVE('',#20767,#20783,#20791,.T.); +#20791 = LINE('',#20792,#20793); +#20792 = CARTESIAN_POINT('',(0.6,-29.88,8.5)); +#20793 = VECTOR('',#20794,1.); +#20794 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20795 = FACE_BOUND('',#20796,.T.); +#20796 = EDGE_LOOP('',(#20797,#20807,#20815,#20823)); +#20797 = ORIENTED_EDGE('',*,*,#20798,.F.); +#20798 = EDGE_CURVE('',#20799,#20801,#20803,.T.); +#20799 = VERTEX_POINT('',#20800); +#20800 = CARTESIAN_POINT('',(0.6,-28.54,8.5)); +#20801 = VERTEX_POINT('',#20802); +#20802 = CARTESIAN_POINT('',(0.6,-27.34,8.5)); +#20803 = LINE('',#20804,#20805); +#20804 = CARTESIAN_POINT('',(0.6,-28.54,8.5)); +#20805 = VECTOR('',#20806,1.); +#20806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20807 = ORIENTED_EDGE('',*,*,#20808,.F.); +#20808 = EDGE_CURVE('',#20809,#20799,#20811,.T.); +#20809 = VERTEX_POINT('',#20810); +#20810 = CARTESIAN_POINT('',(-0.6,-28.54,8.5)); +#20811 = LINE('',#20812,#20813); +#20812 = CARTESIAN_POINT('',(-0.6,-28.54,8.5)); +#20813 = VECTOR('',#20814,1.); +#20814 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20815 = ORIENTED_EDGE('',*,*,#20816,.F.); +#20816 = EDGE_CURVE('',#20817,#20809,#20819,.T.); +#20817 = VERTEX_POINT('',#20818); +#20818 = CARTESIAN_POINT('',(-0.6,-27.34,8.5)); +#20819 = LINE('',#20820,#20821); +#20820 = CARTESIAN_POINT('',(-0.6,-27.34,8.5)); +#20821 = VECTOR('',#20822,1.); +#20822 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20823 = ORIENTED_EDGE('',*,*,#20824,.F.); +#20824 = EDGE_CURVE('',#20801,#20817,#20825,.T.); +#20825 = LINE('',#20826,#20827); +#20826 = CARTESIAN_POINT('',(0.6,-27.34,8.5)); +#20827 = VECTOR('',#20828,1.); +#20828 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20829 = FACE_BOUND('',#20830,.T.); +#20830 = EDGE_LOOP('',(#20831,#20841,#20849,#20857)); +#20831 = ORIENTED_EDGE('',*,*,#20832,.F.); +#20832 = EDGE_CURVE('',#20833,#20835,#20837,.T.); +#20833 = VERTEX_POINT('',#20834); +#20834 = CARTESIAN_POINT('',(0.6,-26.,8.5)); +#20835 = VERTEX_POINT('',#20836); +#20836 = CARTESIAN_POINT('',(0.6,-24.8,8.5)); +#20837 = LINE('',#20838,#20839); +#20838 = CARTESIAN_POINT('',(0.6,-26.,8.5)); +#20839 = VECTOR('',#20840,1.); +#20840 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20841 = ORIENTED_EDGE('',*,*,#20842,.F.); +#20842 = EDGE_CURVE('',#20843,#20833,#20845,.T.); +#20843 = VERTEX_POINT('',#20844); +#20844 = CARTESIAN_POINT('',(-0.6,-26.,8.5)); +#20845 = LINE('',#20846,#20847); +#20846 = CARTESIAN_POINT('',(-0.6,-26.,8.5)); +#20847 = VECTOR('',#20848,1.); +#20848 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20849 = ORIENTED_EDGE('',*,*,#20850,.F.); +#20850 = EDGE_CURVE('',#20851,#20843,#20853,.T.); +#20851 = VERTEX_POINT('',#20852); +#20852 = CARTESIAN_POINT('',(-0.6,-24.8,8.5)); +#20853 = LINE('',#20854,#20855); +#20854 = CARTESIAN_POINT('',(-0.6,-24.8,8.5)); +#20855 = VECTOR('',#20856,1.); +#20856 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20857 = ORIENTED_EDGE('',*,*,#20858,.F.); +#20858 = EDGE_CURVE('',#20835,#20851,#20859,.T.); +#20859 = LINE('',#20860,#20861); +#20860 = CARTESIAN_POINT('',(0.6,-24.8,8.5)); +#20861 = VECTOR('',#20862,1.); +#20862 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20863 = FACE_BOUND('',#20864,.T.); +#20864 = EDGE_LOOP('',(#20865,#20875,#20883,#20891)); +#20865 = ORIENTED_EDGE('',*,*,#20866,.F.); +#20866 = EDGE_CURVE('',#20867,#20869,#20871,.T.); +#20867 = VERTEX_POINT('',#20868); +#20868 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#20869 = VERTEX_POINT('',#20870); +#20870 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#20871 = LINE('',#20872,#20873); +#20872 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#20873 = VECTOR('',#20874,1.); +#20874 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20875 = ORIENTED_EDGE('',*,*,#20876,.F.); +#20876 = EDGE_CURVE('',#20877,#20867,#20879,.T.); +#20877 = VERTEX_POINT('',#20878); +#20878 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#20879 = LINE('',#20880,#20881); +#20880 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#20881 = VECTOR('',#20882,1.); +#20882 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20883 = ORIENTED_EDGE('',*,*,#20884,.F.); +#20884 = EDGE_CURVE('',#20885,#20877,#20887,.T.); +#20885 = VERTEX_POINT('',#20886); +#20886 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#20887 = LINE('',#20888,#20889); +#20888 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#20889 = VECTOR('',#20890,1.); +#20890 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20891 = ORIENTED_EDGE('',*,*,#20892,.F.); +#20892 = EDGE_CURVE('',#20869,#20885,#20893,.T.); +#20893 = LINE('',#20894,#20895); +#20894 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#20895 = VECTOR('',#20896,1.); +#20896 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20897 = FACE_BOUND('',#20898,.T.); +#20898 = EDGE_LOOP('',(#20899,#20909,#20917,#20925)); +#20899 = ORIENTED_EDGE('',*,*,#20900,.F.); +#20900 = EDGE_CURVE('',#20901,#20903,#20905,.T.); +#20901 = VERTEX_POINT('',#20902); +#20902 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#20903 = VERTEX_POINT('',#20904); +#20904 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#20905 = LINE('',#20906,#20907); +#20906 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#20907 = VECTOR('',#20908,1.); +#20908 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20909 = ORIENTED_EDGE('',*,*,#20910,.F.); +#20910 = EDGE_CURVE('',#20911,#20901,#20913,.T.); +#20911 = VERTEX_POINT('',#20912); +#20912 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#20913 = LINE('',#20914,#20915); +#20914 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#20915 = VECTOR('',#20916,1.); +#20916 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20917 = ORIENTED_EDGE('',*,*,#20918,.F.); +#20918 = EDGE_CURVE('',#20919,#20911,#20921,.T.); +#20919 = VERTEX_POINT('',#20920); +#20920 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#20921 = LINE('',#20922,#20923); +#20922 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#20923 = VECTOR('',#20924,1.); +#20924 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20925 = ORIENTED_EDGE('',*,*,#20926,.F.); +#20926 = EDGE_CURVE('',#20903,#20919,#20927,.T.); +#20927 = LINE('',#20928,#20929); +#20928 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#20929 = VECTOR('',#20930,1.); +#20930 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20931 = FACE_BOUND('',#20932,.T.); +#20932 = EDGE_LOOP('',(#20933,#20943,#20951,#20959)); +#20933 = ORIENTED_EDGE('',*,*,#20934,.F.); +#20934 = EDGE_CURVE('',#20935,#20937,#20939,.T.); +#20935 = VERTEX_POINT('',#20936); +#20936 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#20937 = VERTEX_POINT('',#20938); +#20938 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#20939 = LINE('',#20940,#20941); +#20940 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#20941 = VECTOR('',#20942,1.); +#20942 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20943 = ORIENTED_EDGE('',*,*,#20944,.F.); +#20944 = EDGE_CURVE('',#20945,#20935,#20947,.T.); +#20945 = VERTEX_POINT('',#20946); +#20946 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#20947 = LINE('',#20948,#20949); +#20948 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#20949 = VECTOR('',#20950,1.); +#20950 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20951 = ORIENTED_EDGE('',*,*,#20952,.F.); +#20952 = EDGE_CURVE('',#20953,#20945,#20955,.T.); +#20953 = VERTEX_POINT('',#20954); +#20954 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#20955 = LINE('',#20956,#20957); +#20956 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#20957 = VECTOR('',#20958,1.); +#20958 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20959 = ORIENTED_EDGE('',*,*,#20960,.F.); +#20960 = EDGE_CURVE('',#20937,#20953,#20961,.T.); +#20961 = LINE('',#20962,#20963); +#20962 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#20963 = VECTOR('',#20964,1.); +#20964 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20965 = FACE_BOUND('',#20966,.T.); +#20966 = EDGE_LOOP('',(#20967,#20977,#20985,#20993)); +#20967 = ORIENTED_EDGE('',*,*,#20968,.F.); +#20968 = EDGE_CURVE('',#20969,#20971,#20973,.T.); +#20969 = VERTEX_POINT('',#20970); +#20970 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#20971 = VERTEX_POINT('',#20972); +#20972 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#20973 = LINE('',#20974,#20975); +#20974 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#20975 = VECTOR('',#20976,1.); +#20976 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20977 = ORIENTED_EDGE('',*,*,#20978,.F.); +#20978 = EDGE_CURVE('',#20979,#20969,#20981,.T.); +#20979 = VERTEX_POINT('',#20980); +#20980 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#20981 = LINE('',#20982,#20983); +#20982 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#20983 = VECTOR('',#20984,1.); +#20984 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20985 = ORIENTED_EDGE('',*,*,#20986,.F.); +#20986 = EDGE_CURVE('',#20987,#20979,#20989,.T.); +#20987 = VERTEX_POINT('',#20988); +#20988 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#20989 = LINE('',#20990,#20991); +#20990 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#20991 = VECTOR('',#20992,1.); +#20992 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20993 = ORIENTED_EDGE('',*,*,#20994,.F.); +#20994 = EDGE_CURVE('',#20971,#20987,#20995,.T.); +#20995 = LINE('',#20996,#20997); +#20996 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#20997 = VECTOR('',#20998,1.); +#20998 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20999 = FACE_BOUND('',#21000,.T.); +#21000 = EDGE_LOOP('',(#21001,#21011,#21019,#21027)); +#21001 = ORIENTED_EDGE('',*,*,#21002,.F.); +#21002 = EDGE_CURVE('',#21003,#21005,#21007,.T.); +#21003 = VERTEX_POINT('',#21004); +#21004 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#21005 = VERTEX_POINT('',#21006); +#21006 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#21007 = LINE('',#21008,#21009); +#21008 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#21009 = VECTOR('',#21010,1.); +#21010 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21011 = ORIENTED_EDGE('',*,*,#21012,.F.); +#21012 = EDGE_CURVE('',#21013,#21003,#21015,.T.); +#21013 = VERTEX_POINT('',#21014); +#21014 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#21015 = LINE('',#21016,#21017); +#21016 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#21017 = VECTOR('',#21018,1.); +#21018 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21019 = ORIENTED_EDGE('',*,*,#21020,.F.); +#21020 = EDGE_CURVE('',#21021,#21013,#21023,.T.); +#21021 = VERTEX_POINT('',#21022); +#21022 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#21023 = LINE('',#21024,#21025); +#21024 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#21025 = VECTOR('',#21026,1.); +#21026 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21027 = ORIENTED_EDGE('',*,*,#21028,.F.); +#21028 = EDGE_CURVE('',#21005,#21021,#21029,.T.); +#21029 = LINE('',#21030,#21031); +#21030 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#21031 = VECTOR('',#21032,1.); +#21032 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21033 = FACE_BOUND('',#21034,.T.); +#21034 = EDGE_LOOP('',(#21035,#21045,#21053,#21061)); +#21035 = ORIENTED_EDGE('',*,*,#21036,.F.); +#21036 = EDGE_CURVE('',#21037,#21039,#21041,.T.); +#21037 = VERTEX_POINT('',#21038); +#21038 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#21039 = VERTEX_POINT('',#21040); +#21040 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#21041 = LINE('',#21042,#21043); +#21042 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#21043 = VECTOR('',#21044,1.); +#21044 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21045 = ORIENTED_EDGE('',*,*,#21046,.F.); +#21046 = EDGE_CURVE('',#21047,#21037,#21049,.T.); +#21047 = VERTEX_POINT('',#21048); +#21048 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#21049 = LINE('',#21050,#21051); +#21050 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#21051 = VECTOR('',#21052,1.); +#21052 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21053 = ORIENTED_EDGE('',*,*,#21054,.F.); +#21054 = EDGE_CURVE('',#21055,#21047,#21057,.T.); +#21055 = VERTEX_POINT('',#21056); +#21056 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#21057 = LINE('',#21058,#21059); +#21058 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#21059 = VECTOR('',#21060,1.); +#21060 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21061 = ORIENTED_EDGE('',*,*,#21062,.F.); +#21062 = EDGE_CURVE('',#21039,#21055,#21063,.T.); +#21063 = LINE('',#21064,#21065); +#21064 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#21065 = VECTOR('',#21066,1.); +#21066 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21067 = FACE_BOUND('',#21068,.T.); +#21068 = EDGE_LOOP('',(#21069,#21079,#21087,#21095)); +#21069 = ORIENTED_EDGE('',*,*,#21070,.F.); +#21070 = EDGE_CURVE('',#21071,#21073,#21075,.T.); +#21071 = VERTEX_POINT('',#21072); +#21072 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#21073 = VERTEX_POINT('',#21074); +#21074 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#21075 = LINE('',#21076,#21077); +#21076 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#21077 = VECTOR('',#21078,1.); +#21078 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21079 = ORIENTED_EDGE('',*,*,#21080,.F.); +#21080 = EDGE_CURVE('',#21081,#21071,#21083,.T.); +#21081 = VERTEX_POINT('',#21082); +#21082 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#21083 = LINE('',#21084,#21085); +#21084 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#21085 = VECTOR('',#21086,1.); +#21086 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21087 = ORIENTED_EDGE('',*,*,#21088,.F.); +#21088 = EDGE_CURVE('',#21089,#21081,#21091,.T.); +#21089 = VERTEX_POINT('',#21090); +#21090 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#21091 = LINE('',#21092,#21093); +#21092 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#21093 = VECTOR('',#21094,1.); +#21094 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21095 = ORIENTED_EDGE('',*,*,#21096,.F.); +#21096 = EDGE_CURVE('',#21073,#21089,#21097,.T.); +#21097 = LINE('',#21098,#21099); +#21098 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#21099 = VECTOR('',#21100,1.); +#21100 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21101 = FACE_BOUND('',#21102,.T.); +#21102 = EDGE_LOOP('',(#21103,#21113,#21121,#21129)); +#21103 = ORIENTED_EDGE('',*,*,#21104,.F.); +#21104 = EDGE_CURVE('',#21105,#21107,#21109,.T.); +#21105 = VERTEX_POINT('',#21106); +#21106 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#21107 = VERTEX_POINT('',#21108); +#21108 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#21109 = LINE('',#21110,#21111); +#21110 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#21111 = VECTOR('',#21112,1.); +#21112 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21113 = ORIENTED_EDGE('',*,*,#21114,.F.); +#21114 = EDGE_CURVE('',#21115,#21105,#21117,.T.); +#21115 = VERTEX_POINT('',#21116); +#21116 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#21117 = LINE('',#21118,#21119); +#21118 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#21119 = VECTOR('',#21120,1.); +#21120 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21121 = ORIENTED_EDGE('',*,*,#21122,.F.); +#21122 = EDGE_CURVE('',#21123,#21115,#21125,.T.); +#21123 = VERTEX_POINT('',#21124); +#21124 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#21125 = LINE('',#21126,#21127); +#21126 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#21127 = VECTOR('',#21128,1.); +#21128 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21129 = ORIENTED_EDGE('',*,*,#21130,.F.); +#21130 = EDGE_CURVE('',#21107,#21123,#21131,.T.); +#21131 = LINE('',#21132,#21133); +#21132 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#21133 = VECTOR('',#21134,1.); +#21134 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21135 = FACE_BOUND('',#21136,.T.); +#21136 = EDGE_LOOP('',(#21137,#21147,#21155,#21163)); +#21137 = ORIENTED_EDGE('',*,*,#21138,.F.); +#21138 = EDGE_CURVE('',#21139,#21141,#21143,.T.); +#21139 = VERTEX_POINT('',#21140); +#21140 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#21141 = VERTEX_POINT('',#21142); +#21142 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#21143 = LINE('',#21144,#21145); +#21144 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#21145 = VECTOR('',#21146,1.); +#21146 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21147 = ORIENTED_EDGE('',*,*,#21148,.F.); +#21148 = EDGE_CURVE('',#21149,#21139,#21151,.T.); +#21149 = VERTEX_POINT('',#21150); +#21150 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#21151 = LINE('',#21152,#21153); +#21152 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#21153 = VECTOR('',#21154,1.); +#21154 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21155 = ORIENTED_EDGE('',*,*,#21156,.F.); +#21156 = EDGE_CURVE('',#21157,#21149,#21159,.T.); +#21157 = VERTEX_POINT('',#21158); +#21158 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#21159 = LINE('',#21160,#21161); +#21160 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#21161 = VECTOR('',#21162,1.); +#21162 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21163 = ORIENTED_EDGE('',*,*,#21164,.F.); +#21164 = EDGE_CURVE('',#21141,#21157,#21165,.T.); +#21165 = LINE('',#21166,#21167); +#21166 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#21167 = VECTOR('',#21168,1.); +#21168 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21169 = FACE_BOUND('',#21170,.T.); +#21170 = EDGE_LOOP('',(#21171,#21181,#21189,#21197)); +#21171 = ORIENTED_EDGE('',*,*,#21172,.F.); +#21172 = EDGE_CURVE('',#21173,#21175,#21177,.T.); +#21173 = VERTEX_POINT('',#21174); +#21174 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#21175 = VERTEX_POINT('',#21176); +#21176 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#21177 = LINE('',#21178,#21179); +#21178 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#21179 = VECTOR('',#21180,1.); +#21180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21181 = ORIENTED_EDGE('',*,*,#21182,.F.); +#21182 = EDGE_CURVE('',#21183,#21173,#21185,.T.); +#21183 = VERTEX_POINT('',#21184); +#21184 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#21185 = LINE('',#21186,#21187); +#21186 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#21187 = VECTOR('',#21188,1.); +#21188 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21189 = ORIENTED_EDGE('',*,*,#21190,.F.); +#21190 = EDGE_CURVE('',#21191,#21183,#21193,.T.); +#21191 = VERTEX_POINT('',#21192); +#21192 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#21193 = LINE('',#21194,#21195); +#21194 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#21195 = VECTOR('',#21196,1.); +#21196 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21197 = ORIENTED_EDGE('',*,*,#21198,.F.); +#21198 = EDGE_CURVE('',#21175,#21191,#21199,.T.); +#21199 = LINE('',#21200,#21201); +#21200 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#21201 = VECTOR('',#21202,1.); +#21202 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21203 = PLANE('',#21204); +#21204 = AXIS2_PLACEMENT_3D('',#21205,#21206,#21207); +#21205 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,8.5)); +#21206 = DIRECTION('',(0.,0.,1.)); +#21207 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#21208 = ADVANCED_FACE('',(#21209),#21225,.F.); +#21209 = FACE_BOUND('',#21210,.F.); +#21210 = EDGE_LOOP('',(#21211,#21212,#21218,#21219)); +#21211 = ORIENTED_EDGE('',*,*,#20372,.T.); +#21212 = ORIENTED_EDGE('',*,*,#21213,.F.); +#21213 = EDGE_CURVE('',#20461,#20375,#21214,.T.); +#21214 = LINE('',#21215,#21216); +#21215 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#21216 = VECTOR('',#21217,1.); +#21217 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21218 = ORIENTED_EDGE('',*,*,#20460,.T.); +#21219 = ORIENTED_EDGE('',*,*,#21220,.T.); +#21220 = EDGE_CURVE('',#20453,#20373,#21221,.T.); +#21221 = LINE('',#21222,#21223); +#21222 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#21223 = VECTOR('',#21224,1.); +#21224 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21225 = PLANE('',#21226); +#21226 = AXIS2_PLACEMENT_3D('',#21227,#21228,#21229); +#21227 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,0.)); +#21228 = DIRECTION('',(0.,0.,1.)); +#21229 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#21230 = ADVANCED_FACE('',(#21231),#21242,.T.); +#21231 = FACE_BOUND('',#21232,.T.); +#21232 = EDGE_LOOP('',(#21233,#21234,#21240,#21241)); +#21233 = ORIENTED_EDGE('',*,*,#20468,.T.); +#21234 = ORIENTED_EDGE('',*,*,#21235,.T.); +#21235 = EDGE_CURVE('',#20469,#20414,#21236,.T.); +#21236 = LINE('',#21237,#21238); +#21237 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#21238 = VECTOR('',#21239,1.); +#21239 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21240 = ORIENTED_EDGE('',*,*,#20421,.F.); +#21241 = ORIENTED_EDGE('',*,*,#21213,.F.); +#21242 = PLANE('',#21243); +#21243 = AXIS2_PLACEMENT_3D('',#21244,#21245,#21246); +#21244 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#21245 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21247 = ADVANCED_FACE('',(#21248,#21259,#21325,#21391,#21457,#21523, + #21589,#21655,#21721,#21787,#21853,#21919,#21985,#22051,#22117, + #22183,#22249,#22315,#22381,#22447,#22513),#22579,.F.); +#21248 = FACE_BOUND('',#21249,.F.); +#21249 = EDGE_LOOP('',(#21250,#21256,#21257,#21258)); +#21250 = ORIENTED_EDGE('',*,*,#21251,.T.); +#21251 = EDGE_CURVE('',#20406,#20477,#21252,.T.); +#21252 = LINE('',#21253,#21254); +#21253 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.2)); +#21254 = VECTOR('',#21255,1.); +#21255 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21256 = ORIENTED_EDGE('',*,*,#20476,.T.); +#21257 = ORIENTED_EDGE('',*,*,#21235,.T.); +#21258 = ORIENTED_EDGE('',*,*,#20413,.T.); +#21259 = FACE_BOUND('',#21260,.F.); +#21260 = EDGE_LOOP('',(#21261,#21271,#21279,#21287,#21295,#21303,#21311, + #21319)); +#21261 = ORIENTED_EDGE('',*,*,#21262,.F.); +#21262 = EDGE_CURVE('',#21263,#21265,#21267,.T.); +#21263 = VERTEX_POINT('',#21264); +#21264 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21265 = VERTEX_POINT('',#21266); +#21266 = CARTESIAN_POINT('',(9.999999999999E-02,-48.71,0.2)); +#21267 = LINE('',#21268,#21269); +#21268 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21269 = VECTOR('',#21270,1.); +#21270 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21271 = ORIENTED_EDGE('',*,*,#21272,.T.); +#21272 = EDGE_CURVE('',#21263,#21273,#21275,.T.); +#21273 = VERTEX_POINT('',#21274); +#21274 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#21275 = LINE('',#21276,#21277); +#21276 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21277 = VECTOR('',#21278,1.); +#21278 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21279 = ORIENTED_EDGE('',*,*,#21280,.F.); +#21280 = EDGE_CURVE('',#21281,#21273,#21283,.T.); +#21281 = VERTEX_POINT('',#21282); +#21282 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#21283 = LINE('',#21284,#21285); +#21284 = CARTESIAN_POINT('',(-0.1,-36.195,0.2)); +#21285 = VECTOR('',#21286,1.); +#21286 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21287 = ORIENTED_EDGE('',*,*,#21288,.T.); +#21288 = EDGE_CURVE('',#21281,#21289,#21291,.T.); +#21289 = VERTEX_POINT('',#21290); +#21290 = CARTESIAN_POINT('',(-0.1,-47.81,0.2)); +#21291 = LINE('',#21292,#21293); +#21292 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21293 = VECTOR('',#21294,1.); +#21294 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21295 = ORIENTED_EDGE('',*,*,#21296,.T.); +#21296 = EDGE_CURVE('',#21289,#21297,#21299,.T.); +#21297 = VERTEX_POINT('',#21298); +#21298 = CARTESIAN_POINT('',(9.999999999999E-02,-47.81,0.2)); +#21299 = LINE('',#21300,#21301); +#21300 = CARTESIAN_POINT('',(-0.1,-47.81,0.2)); +#21301 = VECTOR('',#21302,1.); +#21302 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21303 = ORIENTED_EDGE('',*,*,#21304,.T.); +#21304 = EDGE_CURVE('',#21297,#21305,#21307,.T.); +#21305 = VERTEX_POINT('',#21306); +#21306 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,0.2)); +#21307 = LINE('',#21308,#21309); +#21308 = CARTESIAN_POINT('',(9.999999999999E-02,-47.81,0.2)); +#21309 = VECTOR('',#21310,1.); +#21310 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21311 = ORIENTED_EDGE('',*,*,#21312,.T.); +#21312 = EDGE_CURVE('',#21305,#21313,#21315,.T.); +#21313 = VERTEX_POINT('',#21314); +#21314 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,0.2)); +#21315 = LINE('',#21316,#21317); +#21316 = CARTESIAN_POINT('',(0.1,-36.195,0.2)); +#21317 = VECTOR('',#21318,1.); +#21318 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21319 = ORIENTED_EDGE('',*,*,#21320,.T.); +#21320 = EDGE_CURVE('',#21313,#21265,#21321,.T.); +#21321 = LINE('',#21322,#21323); +#21322 = CARTESIAN_POINT('',(9.999999999999E-02,-47.81,0.2)); +#21323 = VECTOR('',#21324,1.); +#21324 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21325 = FACE_BOUND('',#21326,.F.); +#21326 = EDGE_LOOP('',(#21327,#21337,#21345,#21353,#21361,#21369,#21377, + #21385)); +#21327 = ORIENTED_EDGE('',*,*,#21328,.F.); +#21328 = EDGE_CURVE('',#21329,#21331,#21333,.T.); +#21329 = VERTEX_POINT('',#21330); +#21330 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21331 = VERTEX_POINT('',#21332); +#21332 = CARTESIAN_POINT('',(9.999999999999E-02,-46.17,0.2)); +#21333 = LINE('',#21334,#21335); +#21334 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21335 = VECTOR('',#21336,1.); +#21336 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21337 = ORIENTED_EDGE('',*,*,#21338,.T.); +#21338 = EDGE_CURVE('',#21329,#21339,#21341,.T.); +#21339 = VERTEX_POINT('',#21340); +#21340 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#21341 = LINE('',#21342,#21343); +#21342 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21343 = VECTOR('',#21344,1.); +#21344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21345 = ORIENTED_EDGE('',*,*,#21346,.F.); +#21346 = EDGE_CURVE('',#21347,#21339,#21349,.T.); +#21347 = VERTEX_POINT('',#21348); +#21348 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#21349 = LINE('',#21350,#21351); +#21350 = CARTESIAN_POINT('',(-0.1,-34.925,0.2)); +#21351 = VECTOR('',#21352,1.); +#21352 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21353 = ORIENTED_EDGE('',*,*,#21354,.T.); +#21354 = EDGE_CURVE('',#21347,#21355,#21357,.T.); +#21355 = VERTEX_POINT('',#21356); +#21356 = CARTESIAN_POINT('',(-0.1,-45.27,0.2)); +#21357 = LINE('',#21358,#21359); +#21358 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21359 = VECTOR('',#21360,1.); +#21360 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21361 = ORIENTED_EDGE('',*,*,#21362,.T.); +#21362 = EDGE_CURVE('',#21355,#21363,#21365,.T.); +#21363 = VERTEX_POINT('',#21364); +#21364 = CARTESIAN_POINT('',(0.1,-45.27,0.2)); +#21365 = LINE('',#21366,#21367); +#21366 = CARTESIAN_POINT('',(-0.1,-45.27,0.2)); +#21367 = VECTOR('',#21368,1.); +#21368 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21369 = ORIENTED_EDGE('',*,*,#21370,.T.); +#21370 = EDGE_CURVE('',#21363,#21371,#21373,.T.); +#21371 = VERTEX_POINT('',#21372); +#21372 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,0.2)); +#21373 = LINE('',#21374,#21375); +#21374 = CARTESIAN_POINT('',(0.1,-45.27,0.2)); +#21375 = VECTOR('',#21376,1.); +#21376 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21377 = ORIENTED_EDGE('',*,*,#21378,.T.); +#21378 = EDGE_CURVE('',#21371,#21379,#21381,.T.); +#21379 = VERTEX_POINT('',#21380); +#21380 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,0.2)); +#21381 = LINE('',#21382,#21383); +#21382 = CARTESIAN_POINT('',(0.1,-34.925,0.2)); +#21383 = VECTOR('',#21384,1.); +#21384 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21385 = ORIENTED_EDGE('',*,*,#21386,.T.); +#21386 = EDGE_CURVE('',#21379,#21331,#21387,.T.); +#21387 = LINE('',#21388,#21389); +#21388 = CARTESIAN_POINT('',(0.1,-45.27,0.2)); +#21389 = VECTOR('',#21390,1.); +#21390 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21391 = FACE_BOUND('',#21392,.F.); +#21392 = EDGE_LOOP('',(#21393,#21403,#21411,#21419,#21427,#21435,#21443, + #21451)); +#21393 = ORIENTED_EDGE('',*,*,#21394,.F.); +#21394 = EDGE_CURVE('',#21395,#21397,#21399,.T.); +#21395 = VERTEX_POINT('',#21396); +#21396 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21397 = VERTEX_POINT('',#21398); +#21398 = CARTESIAN_POINT('',(0.1,-43.63,0.2)); +#21399 = LINE('',#21400,#21401); +#21400 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21401 = VECTOR('',#21402,1.); +#21402 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21403 = ORIENTED_EDGE('',*,*,#21404,.T.); +#21404 = EDGE_CURVE('',#21395,#21405,#21407,.T.); +#21405 = VERTEX_POINT('',#21406); +#21406 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#21407 = LINE('',#21408,#21409); +#21408 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21409 = VECTOR('',#21410,1.); +#21410 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21411 = ORIENTED_EDGE('',*,*,#21412,.F.); +#21412 = EDGE_CURVE('',#21413,#21405,#21415,.T.); +#21413 = VERTEX_POINT('',#21414); +#21414 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#21415 = LINE('',#21416,#21417); +#21416 = CARTESIAN_POINT('',(-0.1,-33.655,0.2)); +#21417 = VECTOR('',#21418,1.); +#21418 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21419 = ORIENTED_EDGE('',*,*,#21420,.T.); +#21420 = EDGE_CURVE('',#21413,#21421,#21423,.T.); +#21421 = VERTEX_POINT('',#21422); +#21422 = CARTESIAN_POINT('',(-0.1,-42.73,0.2)); +#21423 = LINE('',#21424,#21425); +#21424 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21425 = VECTOR('',#21426,1.); +#21426 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21427 = ORIENTED_EDGE('',*,*,#21428,.T.); +#21428 = EDGE_CURVE('',#21421,#21429,#21431,.T.); +#21429 = VERTEX_POINT('',#21430); +#21430 = CARTESIAN_POINT('',(0.1,-42.73,0.2)); +#21431 = LINE('',#21432,#21433); +#21432 = CARTESIAN_POINT('',(-0.1,-42.73,0.2)); +#21433 = VECTOR('',#21434,1.); +#21434 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21435 = ORIENTED_EDGE('',*,*,#21436,.T.); +#21436 = EDGE_CURVE('',#21429,#21437,#21439,.T.); +#21437 = VERTEX_POINT('',#21438); +#21438 = CARTESIAN_POINT('',(0.1,-42.88,0.2)); +#21439 = LINE('',#21440,#21441); +#21440 = CARTESIAN_POINT('',(0.1,-42.73,0.2)); +#21441 = VECTOR('',#21442,1.); +#21442 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21443 = ORIENTED_EDGE('',*,*,#21444,.T.); +#21444 = EDGE_CURVE('',#21437,#21445,#21447,.T.); +#21445 = VERTEX_POINT('',#21446); +#21446 = CARTESIAN_POINT('',(0.1,-43.48,0.2)); +#21447 = LINE('',#21448,#21449); +#21448 = CARTESIAN_POINT('',(0.1,-33.655,0.2)); +#21449 = VECTOR('',#21450,1.); +#21450 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21451 = ORIENTED_EDGE('',*,*,#21452,.T.); +#21452 = EDGE_CURVE('',#21445,#21397,#21453,.T.); +#21453 = LINE('',#21454,#21455); +#21454 = CARTESIAN_POINT('',(0.1,-42.73,0.2)); +#21455 = VECTOR('',#21456,1.); +#21456 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21457 = FACE_BOUND('',#21458,.F.); +#21458 = EDGE_LOOP('',(#21459,#21469,#21477,#21485,#21493,#21501,#21509, + #21517)); +#21459 = ORIENTED_EDGE('',*,*,#21460,.F.); +#21460 = EDGE_CURVE('',#21461,#21463,#21465,.T.); +#21461 = VERTEX_POINT('',#21462); +#21462 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21463 = VERTEX_POINT('',#21464); +#21464 = CARTESIAN_POINT('',(0.1,-41.09,0.2)); +#21465 = LINE('',#21466,#21467); +#21466 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21467 = VECTOR('',#21468,1.); +#21468 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21469 = ORIENTED_EDGE('',*,*,#21470,.T.); +#21470 = EDGE_CURVE('',#21461,#21471,#21473,.T.); +#21471 = VERTEX_POINT('',#21472); +#21472 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#21473 = LINE('',#21474,#21475); +#21474 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21475 = VECTOR('',#21476,1.); +#21476 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21477 = ORIENTED_EDGE('',*,*,#21478,.F.); +#21478 = EDGE_CURVE('',#21479,#21471,#21481,.T.); +#21479 = VERTEX_POINT('',#21480); +#21480 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#21481 = LINE('',#21482,#21483); +#21482 = CARTESIAN_POINT('',(-0.1,-32.385,0.2)); +#21483 = VECTOR('',#21484,1.); +#21484 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21485 = ORIENTED_EDGE('',*,*,#21486,.T.); +#21486 = EDGE_CURVE('',#21479,#21487,#21489,.T.); +#21487 = VERTEX_POINT('',#21488); +#21488 = CARTESIAN_POINT('',(-0.1,-40.19,0.2)); +#21489 = LINE('',#21490,#21491); +#21490 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21491 = VECTOR('',#21492,1.); +#21492 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21493 = ORIENTED_EDGE('',*,*,#21494,.T.); +#21494 = EDGE_CURVE('',#21487,#21495,#21497,.T.); +#21495 = VERTEX_POINT('',#21496); +#21496 = CARTESIAN_POINT('',(0.1,-40.19,0.2)); +#21497 = LINE('',#21498,#21499); +#21498 = CARTESIAN_POINT('',(-0.1,-40.19,0.2)); +#21499 = VECTOR('',#21500,1.); +#21500 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21501 = ORIENTED_EDGE('',*,*,#21502,.T.); +#21502 = EDGE_CURVE('',#21495,#21503,#21505,.T.); +#21503 = VERTEX_POINT('',#21504); +#21504 = CARTESIAN_POINT('',(0.1,-40.34,0.2)); +#21505 = LINE('',#21506,#21507); +#21506 = CARTESIAN_POINT('',(0.1,-40.19,0.2)); +#21507 = VECTOR('',#21508,1.); +#21508 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21509 = ORIENTED_EDGE('',*,*,#21510,.T.); +#21510 = EDGE_CURVE('',#21503,#21511,#21513,.T.); +#21511 = VERTEX_POINT('',#21512); +#21512 = CARTESIAN_POINT('',(0.1,-40.94,0.2)); +#21513 = LINE('',#21514,#21515); +#21514 = CARTESIAN_POINT('',(0.1,-32.385,0.2)); +#21515 = VECTOR('',#21516,1.); +#21516 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21517 = ORIENTED_EDGE('',*,*,#21518,.T.); +#21518 = EDGE_CURVE('',#21511,#21463,#21519,.T.); +#21519 = LINE('',#21520,#21521); +#21520 = CARTESIAN_POINT('',(0.1,-40.19,0.2)); +#21521 = VECTOR('',#21522,1.); +#21522 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21523 = FACE_BOUND('',#21524,.F.); +#21524 = EDGE_LOOP('',(#21525,#21535,#21543,#21551,#21559,#21567,#21575, + #21583)); +#21525 = ORIENTED_EDGE('',*,*,#21526,.F.); +#21526 = EDGE_CURVE('',#21527,#21529,#21531,.T.); +#21527 = VERTEX_POINT('',#21528); +#21528 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21529 = VERTEX_POINT('',#21530); +#21530 = CARTESIAN_POINT('',(0.1,-38.55,0.2)); +#21531 = LINE('',#21532,#21533); +#21532 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21533 = VECTOR('',#21534,1.); +#21534 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21535 = ORIENTED_EDGE('',*,*,#21536,.T.); +#21536 = EDGE_CURVE('',#21527,#21537,#21539,.T.); +#21537 = VERTEX_POINT('',#21538); +#21538 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#21539 = LINE('',#21540,#21541); +#21540 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21541 = VECTOR('',#21542,1.); +#21542 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21543 = ORIENTED_EDGE('',*,*,#21544,.F.); +#21544 = EDGE_CURVE('',#21545,#21537,#21547,.T.); +#21545 = VERTEX_POINT('',#21546); +#21546 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#21547 = LINE('',#21548,#21549); +#21548 = CARTESIAN_POINT('',(-0.1,-31.115,0.2)); +#21549 = VECTOR('',#21550,1.); +#21550 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21551 = ORIENTED_EDGE('',*,*,#21552,.T.); +#21552 = EDGE_CURVE('',#21545,#21553,#21555,.T.); +#21553 = VERTEX_POINT('',#21554); +#21554 = CARTESIAN_POINT('',(-0.1,-37.65,0.2)); +#21555 = LINE('',#21556,#21557); +#21556 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21557 = VECTOR('',#21558,1.); +#21558 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21559 = ORIENTED_EDGE('',*,*,#21560,.T.); +#21560 = EDGE_CURVE('',#21553,#21561,#21563,.T.); +#21561 = VERTEX_POINT('',#21562); +#21562 = CARTESIAN_POINT('',(0.1,-37.65,0.2)); +#21563 = LINE('',#21564,#21565); +#21564 = CARTESIAN_POINT('',(-0.1,-37.65,0.2)); +#21565 = VECTOR('',#21566,1.); +#21566 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21567 = ORIENTED_EDGE('',*,*,#21568,.T.); +#21568 = EDGE_CURVE('',#21561,#21569,#21571,.T.); +#21569 = VERTEX_POINT('',#21570); +#21570 = CARTESIAN_POINT('',(0.1,-37.8,0.2)); +#21571 = LINE('',#21572,#21573); +#21572 = CARTESIAN_POINT('',(0.1,-37.65,0.2)); +#21573 = VECTOR('',#21574,1.); +#21574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21575 = ORIENTED_EDGE('',*,*,#21576,.T.); +#21576 = EDGE_CURVE('',#21569,#21577,#21579,.T.); +#21577 = VERTEX_POINT('',#21578); +#21578 = CARTESIAN_POINT('',(0.1,-38.4,0.2)); +#21579 = LINE('',#21580,#21581); +#21580 = CARTESIAN_POINT('',(0.1,-31.115,0.2)); +#21581 = VECTOR('',#21582,1.); +#21582 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21583 = ORIENTED_EDGE('',*,*,#21584,.T.); +#21584 = EDGE_CURVE('',#21577,#21529,#21585,.T.); +#21585 = LINE('',#21586,#21587); +#21586 = CARTESIAN_POINT('',(0.1,-37.65,0.2)); +#21587 = VECTOR('',#21588,1.); +#21588 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21589 = FACE_BOUND('',#21590,.F.); +#21590 = EDGE_LOOP('',(#21591,#21601,#21609,#21617,#21625,#21633,#21641, + #21649)); +#21591 = ORIENTED_EDGE('',*,*,#21592,.F.); +#21592 = EDGE_CURVE('',#21593,#21595,#21597,.T.); +#21593 = VERTEX_POINT('',#21594); +#21594 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21595 = VERTEX_POINT('',#21596); +#21596 = CARTESIAN_POINT('',(0.1,-36.01,0.2)); +#21597 = LINE('',#21598,#21599); +#21598 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21599 = VECTOR('',#21600,1.); +#21600 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21601 = ORIENTED_EDGE('',*,*,#21602,.T.); +#21602 = EDGE_CURVE('',#21593,#21603,#21605,.T.); +#21603 = VERTEX_POINT('',#21604); +#21604 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#21605 = LINE('',#21606,#21607); +#21606 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21607 = VECTOR('',#21608,1.); +#21608 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21609 = ORIENTED_EDGE('',*,*,#21610,.F.); +#21610 = EDGE_CURVE('',#21611,#21603,#21613,.T.); +#21611 = VERTEX_POINT('',#21612); +#21612 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#21613 = LINE('',#21614,#21615); +#21614 = CARTESIAN_POINT('',(-0.1,-29.845,0.2)); +#21615 = VECTOR('',#21616,1.); +#21616 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21617 = ORIENTED_EDGE('',*,*,#21618,.T.); +#21618 = EDGE_CURVE('',#21611,#21619,#21621,.T.); +#21619 = VERTEX_POINT('',#21620); +#21620 = CARTESIAN_POINT('',(-0.1,-35.11,0.2)); +#21621 = LINE('',#21622,#21623); +#21622 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21623 = VECTOR('',#21624,1.); +#21624 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21625 = ORIENTED_EDGE('',*,*,#21626,.T.); +#21626 = EDGE_CURVE('',#21619,#21627,#21629,.T.); +#21627 = VERTEX_POINT('',#21628); +#21628 = CARTESIAN_POINT('',(0.1,-35.11,0.2)); +#21629 = LINE('',#21630,#21631); +#21630 = CARTESIAN_POINT('',(-0.1,-35.11,0.2)); +#21631 = VECTOR('',#21632,1.); +#21632 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21633 = ORIENTED_EDGE('',*,*,#21634,.T.); +#21634 = EDGE_CURVE('',#21627,#21635,#21637,.T.); +#21635 = VERTEX_POINT('',#21636); +#21636 = CARTESIAN_POINT('',(0.1,-35.26,0.2)); +#21637 = LINE('',#21638,#21639); +#21638 = CARTESIAN_POINT('',(0.1,-35.11,0.2)); +#21639 = VECTOR('',#21640,1.); +#21640 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21641 = ORIENTED_EDGE('',*,*,#21642,.T.); +#21642 = EDGE_CURVE('',#21635,#21643,#21645,.T.); +#21643 = VERTEX_POINT('',#21644); +#21644 = CARTESIAN_POINT('',(0.1,-35.86,0.2)); +#21645 = LINE('',#21646,#21647); +#21646 = CARTESIAN_POINT('',(0.1,-29.845,0.2)); +#21647 = VECTOR('',#21648,1.); +#21648 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21649 = ORIENTED_EDGE('',*,*,#21650,.T.); +#21650 = EDGE_CURVE('',#21643,#21595,#21651,.T.); +#21651 = LINE('',#21652,#21653); +#21652 = CARTESIAN_POINT('',(0.1,-35.11,0.2)); +#21653 = VECTOR('',#21654,1.); +#21654 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21655 = FACE_BOUND('',#21656,.F.); +#21656 = EDGE_LOOP('',(#21657,#21667,#21675,#21683,#21691,#21699,#21707, + #21715)); +#21657 = ORIENTED_EDGE('',*,*,#21658,.F.); +#21658 = EDGE_CURVE('',#21659,#21661,#21663,.T.); +#21659 = VERTEX_POINT('',#21660); +#21660 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21661 = VERTEX_POINT('',#21662); +#21662 = CARTESIAN_POINT('',(0.1,-33.47,0.2)); +#21663 = LINE('',#21664,#21665); +#21664 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21665 = VECTOR('',#21666,1.); +#21666 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21667 = ORIENTED_EDGE('',*,*,#21668,.T.); +#21668 = EDGE_CURVE('',#21659,#21669,#21671,.T.); +#21669 = VERTEX_POINT('',#21670); +#21670 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#21671 = LINE('',#21672,#21673); +#21672 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21673 = VECTOR('',#21674,1.); +#21674 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21675 = ORIENTED_EDGE('',*,*,#21676,.F.); +#21676 = EDGE_CURVE('',#21677,#21669,#21679,.T.); +#21677 = VERTEX_POINT('',#21678); +#21678 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#21679 = LINE('',#21680,#21681); +#21680 = CARTESIAN_POINT('',(-0.1,-28.575,0.2)); +#21681 = VECTOR('',#21682,1.); +#21682 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21683 = ORIENTED_EDGE('',*,*,#21684,.T.); +#21684 = EDGE_CURVE('',#21677,#21685,#21687,.T.); +#21685 = VERTEX_POINT('',#21686); +#21686 = CARTESIAN_POINT('',(-0.1,-32.57,0.2)); +#21687 = LINE('',#21688,#21689); +#21688 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21689 = VECTOR('',#21690,1.); +#21690 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21691 = ORIENTED_EDGE('',*,*,#21692,.T.); +#21692 = EDGE_CURVE('',#21685,#21693,#21695,.T.); +#21693 = VERTEX_POINT('',#21694); +#21694 = CARTESIAN_POINT('',(0.1,-32.57,0.2)); +#21695 = LINE('',#21696,#21697); +#21696 = CARTESIAN_POINT('',(-0.1,-32.57,0.2)); +#21697 = VECTOR('',#21698,1.); +#21698 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21699 = ORIENTED_EDGE('',*,*,#21700,.T.); +#21700 = EDGE_CURVE('',#21693,#21701,#21703,.T.); +#21701 = VERTEX_POINT('',#21702); +#21702 = CARTESIAN_POINT('',(0.1,-32.72,0.2)); +#21703 = LINE('',#21704,#21705); +#21704 = CARTESIAN_POINT('',(0.1,-32.57,0.2)); +#21705 = VECTOR('',#21706,1.); +#21706 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21707 = ORIENTED_EDGE('',*,*,#21708,.T.); +#21708 = EDGE_CURVE('',#21701,#21709,#21711,.T.); +#21709 = VERTEX_POINT('',#21710); +#21710 = CARTESIAN_POINT('',(0.1,-33.32,0.2)); +#21711 = LINE('',#21712,#21713); +#21712 = CARTESIAN_POINT('',(0.1,-28.575,0.2)); +#21713 = VECTOR('',#21714,1.); +#21714 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21715 = ORIENTED_EDGE('',*,*,#21716,.T.); +#21716 = EDGE_CURVE('',#21709,#21661,#21717,.T.); +#21717 = LINE('',#21718,#21719); +#21718 = CARTESIAN_POINT('',(0.1,-32.57,0.2)); +#21719 = VECTOR('',#21720,1.); +#21720 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21721 = FACE_BOUND('',#21722,.F.); +#21722 = EDGE_LOOP('',(#21723,#21733,#21741,#21749,#21757,#21765,#21773, + #21781)); +#21723 = ORIENTED_EDGE('',*,*,#21724,.F.); +#21724 = EDGE_CURVE('',#21725,#21727,#21729,.T.); +#21725 = VERTEX_POINT('',#21726); +#21726 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21727 = VERTEX_POINT('',#21728); +#21728 = CARTESIAN_POINT('',(0.1,-30.93,0.2)); +#21729 = LINE('',#21730,#21731); +#21730 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21731 = VECTOR('',#21732,1.); +#21732 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21733 = ORIENTED_EDGE('',*,*,#21734,.T.); +#21734 = EDGE_CURVE('',#21725,#21735,#21737,.T.); +#21735 = VERTEX_POINT('',#21736); +#21736 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#21737 = LINE('',#21738,#21739); +#21738 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21739 = VECTOR('',#21740,1.); +#21740 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21741 = ORIENTED_EDGE('',*,*,#21742,.F.); +#21742 = EDGE_CURVE('',#21743,#21735,#21745,.T.); +#21743 = VERTEX_POINT('',#21744); +#21744 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#21745 = LINE('',#21746,#21747); +#21746 = CARTESIAN_POINT('',(-0.1,-27.305,0.2)); +#21747 = VECTOR('',#21748,1.); +#21748 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21749 = ORIENTED_EDGE('',*,*,#21750,.T.); +#21750 = EDGE_CURVE('',#21743,#21751,#21753,.T.); +#21751 = VERTEX_POINT('',#21752); +#21752 = CARTESIAN_POINT('',(-0.1,-30.03,0.2)); +#21753 = LINE('',#21754,#21755); +#21754 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21755 = VECTOR('',#21756,1.); +#21756 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21757 = ORIENTED_EDGE('',*,*,#21758,.T.); +#21758 = EDGE_CURVE('',#21751,#21759,#21761,.T.); +#21759 = VERTEX_POINT('',#21760); +#21760 = CARTESIAN_POINT('',(0.1,-30.03,0.2)); +#21761 = LINE('',#21762,#21763); +#21762 = CARTESIAN_POINT('',(-0.1,-30.03,0.2)); +#21763 = VECTOR('',#21764,1.); +#21764 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21765 = ORIENTED_EDGE('',*,*,#21766,.T.); +#21766 = EDGE_CURVE('',#21759,#21767,#21769,.T.); +#21767 = VERTEX_POINT('',#21768); +#21768 = CARTESIAN_POINT('',(0.1,-30.18,0.2)); +#21769 = LINE('',#21770,#21771); +#21770 = CARTESIAN_POINT('',(0.1,-30.03,0.2)); +#21771 = VECTOR('',#21772,1.); +#21772 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21773 = ORIENTED_EDGE('',*,*,#21774,.T.); +#21774 = EDGE_CURVE('',#21767,#21775,#21777,.T.); +#21775 = VERTEX_POINT('',#21776); +#21776 = CARTESIAN_POINT('',(0.1,-30.78,0.2)); +#21777 = LINE('',#21778,#21779); +#21778 = CARTESIAN_POINT('',(0.1,-27.305,0.2)); +#21779 = VECTOR('',#21780,1.); +#21780 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21781 = ORIENTED_EDGE('',*,*,#21782,.T.); +#21782 = EDGE_CURVE('',#21775,#21727,#21783,.T.); +#21783 = LINE('',#21784,#21785); +#21784 = CARTESIAN_POINT('',(0.1,-30.03,0.2)); +#21785 = VECTOR('',#21786,1.); +#21786 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21787 = FACE_BOUND('',#21788,.F.); +#21788 = EDGE_LOOP('',(#21789,#21799,#21807,#21815,#21823,#21831,#21839, + #21847)); +#21789 = ORIENTED_EDGE('',*,*,#21790,.F.); +#21790 = EDGE_CURVE('',#21791,#21793,#21795,.T.); +#21791 = VERTEX_POINT('',#21792); +#21792 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21793 = VERTEX_POINT('',#21794); +#21794 = CARTESIAN_POINT('',(0.1,-28.39,0.2)); +#21795 = LINE('',#21796,#21797); +#21796 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21797 = VECTOR('',#21798,1.); +#21798 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21799 = ORIENTED_EDGE('',*,*,#21800,.T.); +#21800 = EDGE_CURVE('',#21791,#21801,#21803,.T.); +#21801 = VERTEX_POINT('',#21802); +#21802 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#21803 = LINE('',#21804,#21805); +#21804 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21805 = VECTOR('',#21806,1.); +#21806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21807 = ORIENTED_EDGE('',*,*,#21808,.F.); +#21808 = EDGE_CURVE('',#21809,#21801,#21811,.T.); +#21809 = VERTEX_POINT('',#21810); +#21810 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#21811 = LINE('',#21812,#21813); +#21812 = CARTESIAN_POINT('',(-0.1,-26.035,0.2)); +#21813 = VECTOR('',#21814,1.); +#21814 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21815 = ORIENTED_EDGE('',*,*,#21816,.T.); +#21816 = EDGE_CURVE('',#21809,#21817,#21819,.T.); +#21817 = VERTEX_POINT('',#21818); +#21818 = CARTESIAN_POINT('',(-0.1,-27.49,0.2)); +#21819 = LINE('',#21820,#21821); +#21820 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21821 = VECTOR('',#21822,1.); +#21822 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21823 = ORIENTED_EDGE('',*,*,#21824,.T.); +#21824 = EDGE_CURVE('',#21817,#21825,#21827,.T.); +#21825 = VERTEX_POINT('',#21826); +#21826 = CARTESIAN_POINT('',(0.1,-27.49,0.2)); +#21827 = LINE('',#21828,#21829); +#21828 = CARTESIAN_POINT('',(-0.1,-27.49,0.2)); +#21829 = VECTOR('',#21830,1.); +#21830 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21831 = ORIENTED_EDGE('',*,*,#21832,.T.); +#21832 = EDGE_CURVE('',#21825,#21833,#21835,.T.); +#21833 = VERTEX_POINT('',#21834); +#21834 = CARTESIAN_POINT('',(0.1,-27.64,0.2)); +#21835 = LINE('',#21836,#21837); +#21836 = CARTESIAN_POINT('',(0.1,-27.49,0.2)); +#21837 = VECTOR('',#21838,1.); +#21838 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21839 = ORIENTED_EDGE('',*,*,#21840,.T.); +#21840 = EDGE_CURVE('',#21833,#21841,#21843,.T.); +#21841 = VERTEX_POINT('',#21842); +#21842 = CARTESIAN_POINT('',(0.1,-28.24,0.2)); +#21843 = LINE('',#21844,#21845); +#21844 = CARTESIAN_POINT('',(0.1,-26.035,0.2)); +#21845 = VECTOR('',#21846,1.); +#21846 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21847 = ORIENTED_EDGE('',*,*,#21848,.T.); +#21848 = EDGE_CURVE('',#21841,#21793,#21849,.T.); +#21849 = LINE('',#21850,#21851); +#21850 = CARTESIAN_POINT('',(0.1,-27.49,0.2)); +#21851 = VECTOR('',#21852,1.); +#21852 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21853 = FACE_BOUND('',#21854,.F.); +#21854 = EDGE_LOOP('',(#21855,#21865,#21873,#21881,#21889,#21897,#21905, + #21913)); +#21855 = ORIENTED_EDGE('',*,*,#21856,.F.); +#21856 = EDGE_CURVE('',#21857,#21859,#21861,.T.); +#21857 = VERTEX_POINT('',#21858); +#21858 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21859 = VERTEX_POINT('',#21860); +#21860 = CARTESIAN_POINT('',(0.1,-25.85,0.2)); +#21861 = LINE('',#21862,#21863); +#21862 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21863 = VECTOR('',#21864,1.); +#21864 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21865 = ORIENTED_EDGE('',*,*,#21866,.T.); +#21866 = EDGE_CURVE('',#21857,#21867,#21869,.T.); +#21867 = VERTEX_POINT('',#21868); +#21868 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#21869 = LINE('',#21870,#21871); +#21870 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21871 = VECTOR('',#21872,1.); +#21872 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21873 = ORIENTED_EDGE('',*,*,#21874,.F.); +#21874 = EDGE_CURVE('',#21875,#21867,#21877,.T.); +#21875 = VERTEX_POINT('',#21876); +#21876 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#21877 = LINE('',#21878,#21879); +#21878 = CARTESIAN_POINT('',(-0.1,-24.765,0.2)); +#21879 = VECTOR('',#21880,1.); +#21880 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21881 = ORIENTED_EDGE('',*,*,#21882,.T.); +#21882 = EDGE_CURVE('',#21875,#21883,#21885,.T.); +#21883 = VERTEX_POINT('',#21884); +#21884 = CARTESIAN_POINT('',(-0.1,-24.95,0.2)); +#21885 = LINE('',#21886,#21887); +#21886 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21887 = VECTOR('',#21888,1.); +#21888 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21889 = ORIENTED_EDGE('',*,*,#21890,.T.); +#21890 = EDGE_CURVE('',#21883,#21891,#21893,.T.); +#21891 = VERTEX_POINT('',#21892); +#21892 = CARTESIAN_POINT('',(0.1,-24.95,0.2)); +#21893 = LINE('',#21894,#21895); +#21894 = CARTESIAN_POINT('',(-0.1,-24.95,0.2)); +#21895 = VECTOR('',#21896,1.); +#21896 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21897 = ORIENTED_EDGE('',*,*,#21898,.T.); +#21898 = EDGE_CURVE('',#21891,#21899,#21901,.T.); +#21899 = VERTEX_POINT('',#21900); +#21900 = CARTESIAN_POINT('',(0.1,-25.1,0.2)); +#21901 = LINE('',#21902,#21903); +#21902 = CARTESIAN_POINT('',(0.1,-24.95,0.2)); +#21903 = VECTOR('',#21904,1.); +#21904 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21905 = ORIENTED_EDGE('',*,*,#21906,.T.); +#21906 = EDGE_CURVE('',#21899,#21907,#21909,.T.); +#21907 = VERTEX_POINT('',#21908); +#21908 = CARTESIAN_POINT('',(0.1,-25.7,0.2)); +#21909 = LINE('',#21910,#21911); +#21910 = CARTESIAN_POINT('',(0.1,-24.765,0.2)); +#21911 = VECTOR('',#21912,1.); +#21912 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21913 = ORIENTED_EDGE('',*,*,#21914,.T.); +#21914 = EDGE_CURVE('',#21907,#21859,#21915,.T.); +#21915 = LINE('',#21916,#21917); +#21916 = CARTESIAN_POINT('',(0.1,-24.95,0.2)); +#21917 = VECTOR('',#21918,1.); +#21918 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21919 = FACE_BOUND('',#21920,.F.); +#21920 = EDGE_LOOP('',(#21921,#21931,#21939,#21947,#21955,#21963,#21971, + #21979)); +#21921 = ORIENTED_EDGE('',*,*,#21922,.F.); +#21922 = EDGE_CURVE('',#21923,#21925,#21927,.T.); +#21923 = VERTEX_POINT('',#21924); +#21924 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21925 = VERTEX_POINT('',#21926); +#21926 = CARTESIAN_POINT('',(0.1,-23.31,0.2)); +#21927 = LINE('',#21928,#21929); +#21928 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21929 = VECTOR('',#21930,1.); +#21930 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21931 = ORIENTED_EDGE('',*,*,#21932,.T.); +#21932 = EDGE_CURVE('',#21923,#21933,#21935,.T.); +#21933 = VERTEX_POINT('',#21934); +#21934 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#21935 = LINE('',#21936,#21937); +#21936 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21937 = VECTOR('',#21938,1.); +#21938 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21939 = ORIENTED_EDGE('',*,*,#21940,.F.); +#21940 = EDGE_CURVE('',#21941,#21933,#21943,.T.); +#21941 = VERTEX_POINT('',#21942); +#21942 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#21943 = LINE('',#21944,#21945); +#21944 = CARTESIAN_POINT('',(-0.1,-23.495,0.2)); +#21945 = VECTOR('',#21946,1.); +#21946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21947 = ORIENTED_EDGE('',*,*,#21948,.T.); +#21948 = EDGE_CURVE('',#21941,#21949,#21951,.T.); +#21949 = VERTEX_POINT('',#21950); +#21950 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#21951 = LINE('',#21952,#21953); +#21952 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21953 = VECTOR('',#21954,1.); +#21954 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21955 = ORIENTED_EDGE('',*,*,#21956,.T.); +#21956 = EDGE_CURVE('',#21949,#21957,#21959,.T.); +#21957 = VERTEX_POINT('',#21958); +#21958 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#21959 = LINE('',#21960,#21961); +#21960 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#21961 = VECTOR('',#21962,1.); +#21962 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21963 = ORIENTED_EDGE('',*,*,#21964,.T.); +#21964 = EDGE_CURVE('',#21957,#21965,#21967,.T.); +#21965 = VERTEX_POINT('',#21966); +#21966 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#21967 = LINE('',#21968,#21969); +#21968 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#21969 = VECTOR('',#21970,1.); +#21970 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21971 = ORIENTED_EDGE('',*,*,#21972,.T.); +#21972 = EDGE_CURVE('',#21965,#21973,#21975,.T.); +#21973 = VERTEX_POINT('',#21974); +#21974 = CARTESIAN_POINT('',(0.1,-23.16,0.2)); +#21975 = LINE('',#21976,#21977); +#21976 = CARTESIAN_POINT('',(0.1,-23.495,0.2)); +#21977 = VECTOR('',#21978,1.); +#21978 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21979 = ORIENTED_EDGE('',*,*,#21980,.T.); +#21980 = EDGE_CURVE('',#21973,#21925,#21981,.T.); +#21981 = LINE('',#21982,#21983); +#21982 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#21983 = VECTOR('',#21984,1.); +#21984 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21985 = FACE_BOUND('',#21986,.F.); +#21986 = EDGE_LOOP('',(#21987,#21997,#22005,#22013,#22021,#22029,#22037, + #22045)); +#21987 = ORIENTED_EDGE('',*,*,#21988,.F.); +#21988 = EDGE_CURVE('',#21989,#21991,#21993,.T.); +#21989 = VERTEX_POINT('',#21990); +#21990 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#21991 = VERTEX_POINT('',#21992); +#21992 = CARTESIAN_POINT('',(0.1,-20.77,0.2)); +#21993 = LINE('',#21994,#21995); +#21994 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#21995 = VECTOR('',#21996,1.); +#21996 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21997 = ORIENTED_EDGE('',*,*,#21998,.T.); +#21998 = EDGE_CURVE('',#21989,#21999,#22001,.T.); +#21999 = VERTEX_POINT('',#22000); +#22000 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#22001 = LINE('',#22002,#22003); +#22002 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#22003 = VECTOR('',#22004,1.); +#22004 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22005 = ORIENTED_EDGE('',*,*,#22006,.F.); +#22006 = EDGE_CURVE('',#22007,#21999,#22009,.T.); +#22007 = VERTEX_POINT('',#22008); +#22008 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#22009 = LINE('',#22010,#22011); +#22010 = CARTESIAN_POINT('',(-0.1,-22.225,0.2)); +#22011 = VECTOR('',#22012,1.); +#22012 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22013 = ORIENTED_EDGE('',*,*,#22014,.T.); +#22014 = EDGE_CURVE('',#22007,#22015,#22017,.T.); +#22015 = VERTEX_POINT('',#22016); +#22016 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#22017 = LINE('',#22018,#22019); +#22018 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#22019 = VECTOR('',#22020,1.); +#22020 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22021 = ORIENTED_EDGE('',*,*,#22022,.T.); +#22022 = EDGE_CURVE('',#22015,#22023,#22025,.T.); +#22023 = VERTEX_POINT('',#22024); +#22024 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#22025 = LINE('',#22026,#22027); +#22026 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#22027 = VECTOR('',#22028,1.); +#22028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22029 = ORIENTED_EDGE('',*,*,#22030,.T.); +#22030 = EDGE_CURVE('',#22023,#22031,#22033,.T.); +#22031 = VERTEX_POINT('',#22032); +#22032 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#22033 = LINE('',#22034,#22035); +#22034 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#22035 = VECTOR('',#22036,1.); +#22036 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22037 = ORIENTED_EDGE('',*,*,#22038,.T.); +#22038 = EDGE_CURVE('',#22031,#22039,#22041,.T.); +#22039 = VERTEX_POINT('',#22040); +#22040 = CARTESIAN_POINT('',(0.1,-20.62,0.2)); +#22041 = LINE('',#22042,#22043); +#22042 = CARTESIAN_POINT('',(0.1,-22.225,0.2)); +#22043 = VECTOR('',#22044,1.); +#22044 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22045 = ORIENTED_EDGE('',*,*,#22046,.T.); +#22046 = EDGE_CURVE('',#22039,#21991,#22047,.T.); +#22047 = LINE('',#22048,#22049); +#22048 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#22049 = VECTOR('',#22050,1.); +#22050 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22051 = FACE_BOUND('',#22052,.F.); +#22052 = EDGE_LOOP('',(#22053,#22063,#22071,#22079,#22087,#22095,#22103, + #22111)); +#22053 = ORIENTED_EDGE('',*,*,#22054,.F.); +#22054 = EDGE_CURVE('',#22055,#22057,#22059,.T.); +#22055 = VERTEX_POINT('',#22056); +#22056 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22057 = VERTEX_POINT('',#22058); +#22058 = CARTESIAN_POINT('',(0.1,-18.23,0.2)); +#22059 = LINE('',#22060,#22061); +#22060 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22061 = VECTOR('',#22062,1.); +#22062 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22063 = ORIENTED_EDGE('',*,*,#22064,.T.); +#22064 = EDGE_CURVE('',#22055,#22065,#22067,.T.); +#22065 = VERTEX_POINT('',#22066); +#22066 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#22067 = LINE('',#22068,#22069); +#22068 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22069 = VECTOR('',#22070,1.); +#22070 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22071 = ORIENTED_EDGE('',*,*,#22072,.F.); +#22072 = EDGE_CURVE('',#22073,#22065,#22075,.T.); +#22073 = VERTEX_POINT('',#22074); +#22074 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#22075 = LINE('',#22076,#22077); +#22076 = CARTESIAN_POINT('',(-0.1,-20.955,0.2)); +#22077 = VECTOR('',#22078,1.); +#22078 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22079 = ORIENTED_EDGE('',*,*,#22080,.T.); +#22080 = EDGE_CURVE('',#22073,#22081,#22083,.T.); +#22081 = VERTEX_POINT('',#22082); +#22082 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#22083 = LINE('',#22084,#22085); +#22084 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22085 = VECTOR('',#22086,1.); +#22086 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22087 = ORIENTED_EDGE('',*,*,#22088,.T.); +#22088 = EDGE_CURVE('',#22081,#22089,#22091,.T.); +#22089 = VERTEX_POINT('',#22090); +#22090 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#22091 = LINE('',#22092,#22093); +#22092 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#22093 = VECTOR('',#22094,1.); +#22094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22095 = ORIENTED_EDGE('',*,*,#22096,.T.); +#22096 = EDGE_CURVE('',#22089,#22097,#22099,.T.); +#22097 = VERTEX_POINT('',#22098); +#22098 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#22099 = LINE('',#22100,#22101); +#22100 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#22101 = VECTOR('',#22102,1.); +#22102 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22103 = ORIENTED_EDGE('',*,*,#22104,.T.); +#22104 = EDGE_CURVE('',#22097,#22105,#22107,.T.); +#22105 = VERTEX_POINT('',#22106); +#22106 = CARTESIAN_POINT('',(0.1,-18.08,0.2)); +#22107 = LINE('',#22108,#22109); +#22108 = CARTESIAN_POINT('',(0.1,-20.955,0.2)); +#22109 = VECTOR('',#22110,1.); +#22110 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22111 = ORIENTED_EDGE('',*,*,#22112,.T.); +#22112 = EDGE_CURVE('',#22105,#22057,#22113,.T.); +#22113 = LINE('',#22114,#22115); +#22114 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#22115 = VECTOR('',#22116,1.); +#22116 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22117 = FACE_BOUND('',#22118,.F.); +#22118 = EDGE_LOOP('',(#22119,#22129,#22137,#22145,#22153,#22161,#22169, + #22177)); +#22119 = ORIENTED_EDGE('',*,*,#22120,.F.); +#22120 = EDGE_CURVE('',#22121,#22123,#22125,.T.); +#22121 = VERTEX_POINT('',#22122); +#22122 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22123 = VERTEX_POINT('',#22124); +#22124 = CARTESIAN_POINT('',(0.1,-15.69,0.2)); +#22125 = LINE('',#22126,#22127); +#22126 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22127 = VECTOR('',#22128,1.); +#22128 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22129 = ORIENTED_EDGE('',*,*,#22130,.T.); +#22130 = EDGE_CURVE('',#22121,#22131,#22133,.T.); +#22131 = VERTEX_POINT('',#22132); +#22132 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#22133 = LINE('',#22134,#22135); +#22134 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22135 = VECTOR('',#22136,1.); +#22136 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22137 = ORIENTED_EDGE('',*,*,#22138,.F.); +#22138 = EDGE_CURVE('',#22139,#22131,#22141,.T.); +#22139 = VERTEX_POINT('',#22140); +#22140 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#22141 = LINE('',#22142,#22143); +#22142 = CARTESIAN_POINT('',(-0.1,-19.685,0.2)); +#22143 = VECTOR('',#22144,1.); +#22144 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22145 = ORIENTED_EDGE('',*,*,#22146,.T.); +#22146 = EDGE_CURVE('',#22139,#22147,#22149,.T.); +#22147 = VERTEX_POINT('',#22148); +#22148 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#22149 = LINE('',#22150,#22151); +#22150 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22151 = VECTOR('',#22152,1.); +#22152 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22153 = ORIENTED_EDGE('',*,*,#22154,.T.); +#22154 = EDGE_CURVE('',#22147,#22155,#22157,.T.); +#22155 = VERTEX_POINT('',#22156); +#22156 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#22157 = LINE('',#22158,#22159); +#22158 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#22159 = VECTOR('',#22160,1.); +#22160 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22161 = ORIENTED_EDGE('',*,*,#22162,.T.); +#22162 = EDGE_CURVE('',#22155,#22163,#22165,.T.); +#22163 = VERTEX_POINT('',#22164); +#22164 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#22165 = LINE('',#22166,#22167); +#22166 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#22167 = VECTOR('',#22168,1.); +#22168 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22169 = ORIENTED_EDGE('',*,*,#22170,.T.); +#22170 = EDGE_CURVE('',#22163,#22171,#22173,.T.); +#22171 = VERTEX_POINT('',#22172); +#22172 = CARTESIAN_POINT('',(0.1,-15.54,0.2)); +#22173 = LINE('',#22174,#22175); +#22174 = CARTESIAN_POINT('',(0.1,-19.685,0.2)); +#22175 = VECTOR('',#22176,1.); +#22176 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22177 = ORIENTED_EDGE('',*,*,#22178,.T.); +#22178 = EDGE_CURVE('',#22171,#22123,#22179,.T.); +#22179 = LINE('',#22180,#22181); +#22180 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#22181 = VECTOR('',#22182,1.); +#22182 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22183 = FACE_BOUND('',#22184,.F.); +#22184 = EDGE_LOOP('',(#22185,#22195,#22203,#22211,#22219,#22227,#22235, + #22243)); +#22185 = ORIENTED_EDGE('',*,*,#22186,.F.); +#22186 = EDGE_CURVE('',#22187,#22189,#22191,.T.); +#22187 = VERTEX_POINT('',#22188); +#22188 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22189 = VERTEX_POINT('',#22190); +#22190 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#22191 = LINE('',#22192,#22193); +#22192 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22193 = VECTOR('',#22194,1.); +#22194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22195 = ORIENTED_EDGE('',*,*,#22196,.T.); +#22196 = EDGE_CURVE('',#22187,#22197,#22199,.T.); +#22197 = VERTEX_POINT('',#22198); +#22198 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#22199 = LINE('',#22200,#22201); +#22200 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22201 = VECTOR('',#22202,1.); +#22202 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22203 = ORIENTED_EDGE('',*,*,#22204,.F.); +#22204 = EDGE_CURVE('',#22205,#22197,#22207,.T.); +#22205 = VERTEX_POINT('',#22206); +#22206 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#22207 = LINE('',#22208,#22209); +#22208 = CARTESIAN_POINT('',(-0.1,-18.415,0.2)); +#22209 = VECTOR('',#22210,1.); +#22210 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22211 = ORIENTED_EDGE('',*,*,#22212,.T.); +#22212 = EDGE_CURVE('',#22205,#22213,#22215,.T.); +#22213 = VERTEX_POINT('',#22214); +#22214 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#22215 = LINE('',#22216,#22217); +#22216 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22217 = VECTOR('',#22218,1.); +#22218 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22219 = ORIENTED_EDGE('',*,*,#22220,.T.); +#22220 = EDGE_CURVE('',#22213,#22221,#22223,.T.); +#22221 = VERTEX_POINT('',#22222); +#22222 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#22223 = LINE('',#22224,#22225); +#22224 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#22225 = VECTOR('',#22226,1.); +#22226 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22227 = ORIENTED_EDGE('',*,*,#22228,.T.); +#22228 = EDGE_CURVE('',#22221,#22229,#22231,.T.); +#22229 = VERTEX_POINT('',#22230); +#22230 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#22231 = LINE('',#22232,#22233); +#22232 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#22233 = VECTOR('',#22234,1.); +#22234 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22235 = ORIENTED_EDGE('',*,*,#22236,.T.); +#22236 = EDGE_CURVE('',#22229,#22237,#22239,.T.); +#22237 = VERTEX_POINT('',#22238); +#22238 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#22239 = LINE('',#22240,#22241); +#22240 = CARTESIAN_POINT('',(0.1,-18.415,0.2)); +#22241 = VECTOR('',#22242,1.); +#22242 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22243 = ORIENTED_EDGE('',*,*,#22244,.T.); +#22244 = EDGE_CURVE('',#22237,#22189,#22245,.T.); +#22245 = LINE('',#22246,#22247); +#22246 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#22247 = VECTOR('',#22248,1.); +#22248 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22249 = FACE_BOUND('',#22250,.F.); +#22250 = EDGE_LOOP('',(#22251,#22261,#22269,#22277,#22285,#22293,#22301, + #22309)); +#22251 = ORIENTED_EDGE('',*,*,#22252,.F.); +#22252 = EDGE_CURVE('',#22253,#22255,#22257,.T.); +#22253 = VERTEX_POINT('',#22254); +#22254 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22255 = VERTEX_POINT('',#22256); +#22256 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#22257 = LINE('',#22258,#22259); +#22258 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22259 = VECTOR('',#22260,1.); +#22260 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22261 = ORIENTED_EDGE('',*,*,#22262,.T.); +#22262 = EDGE_CURVE('',#22253,#22263,#22265,.T.); +#22263 = VERTEX_POINT('',#22264); +#22264 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#22265 = LINE('',#22266,#22267); +#22266 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22267 = VECTOR('',#22268,1.); +#22268 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22269 = ORIENTED_EDGE('',*,*,#22270,.F.); +#22270 = EDGE_CURVE('',#22271,#22263,#22273,.T.); +#22271 = VERTEX_POINT('',#22272); +#22272 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#22273 = LINE('',#22274,#22275); +#22274 = CARTESIAN_POINT('',(-0.1,-17.145,0.2)); +#22275 = VECTOR('',#22276,1.); +#22276 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22277 = ORIENTED_EDGE('',*,*,#22278,.T.); +#22278 = EDGE_CURVE('',#22271,#22279,#22281,.T.); +#22279 = VERTEX_POINT('',#22280); +#22280 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#22281 = LINE('',#22282,#22283); +#22282 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22283 = VECTOR('',#22284,1.); +#22284 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22285 = ORIENTED_EDGE('',*,*,#22286,.T.); +#22286 = EDGE_CURVE('',#22279,#22287,#22289,.T.); +#22287 = VERTEX_POINT('',#22288); +#22288 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#22289 = LINE('',#22290,#22291); +#22290 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#22291 = VECTOR('',#22292,1.); +#22292 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22293 = ORIENTED_EDGE('',*,*,#22294,.T.); +#22294 = EDGE_CURVE('',#22287,#22295,#22297,.T.); +#22295 = VERTEX_POINT('',#22296); +#22296 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#22297 = LINE('',#22298,#22299); +#22298 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#22299 = VECTOR('',#22300,1.); +#22300 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22301 = ORIENTED_EDGE('',*,*,#22302,.T.); +#22302 = EDGE_CURVE('',#22295,#22303,#22305,.T.); +#22303 = VERTEX_POINT('',#22304); +#22304 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#22305 = LINE('',#22306,#22307); +#22306 = CARTESIAN_POINT('',(0.1,-17.145,0.2)); +#22307 = VECTOR('',#22308,1.); +#22308 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22309 = ORIENTED_EDGE('',*,*,#22310,.T.); +#22310 = EDGE_CURVE('',#22303,#22255,#22311,.T.); +#22311 = LINE('',#22312,#22313); +#22312 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#22313 = VECTOR('',#22314,1.); +#22314 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22315 = FACE_BOUND('',#22316,.F.); +#22316 = EDGE_LOOP('',(#22317,#22327,#22335,#22343,#22351,#22359,#22367, + #22375)); +#22317 = ORIENTED_EDGE('',*,*,#22318,.F.); +#22318 = EDGE_CURVE('',#22319,#22321,#22323,.T.); +#22319 = VERTEX_POINT('',#22320); +#22320 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22321 = VERTEX_POINT('',#22322); +#22322 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#22323 = LINE('',#22324,#22325); +#22324 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22325 = VECTOR('',#22326,1.); +#22326 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22327 = ORIENTED_EDGE('',*,*,#22328,.T.); +#22328 = EDGE_CURVE('',#22319,#22329,#22331,.T.); +#22329 = VERTEX_POINT('',#22330); +#22330 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#22331 = LINE('',#22332,#22333); +#22332 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22333 = VECTOR('',#22334,1.); +#22334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22335 = ORIENTED_EDGE('',*,*,#22336,.F.); +#22336 = EDGE_CURVE('',#22337,#22329,#22339,.T.); +#22337 = VERTEX_POINT('',#22338); +#22338 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#22339 = LINE('',#22340,#22341); +#22340 = CARTESIAN_POINT('',(-0.1,-15.875,0.2)); +#22341 = VECTOR('',#22342,1.); +#22342 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22343 = ORIENTED_EDGE('',*,*,#22344,.T.); +#22344 = EDGE_CURVE('',#22337,#22345,#22347,.T.); +#22345 = VERTEX_POINT('',#22346); +#22346 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#22347 = LINE('',#22348,#22349); +#22348 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22349 = VECTOR('',#22350,1.); +#22350 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22351 = ORIENTED_EDGE('',*,*,#22352,.T.); +#22352 = EDGE_CURVE('',#22345,#22353,#22355,.T.); +#22353 = VERTEX_POINT('',#22354); +#22354 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#22355 = LINE('',#22356,#22357); +#22356 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#22357 = VECTOR('',#22358,1.); +#22358 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22359 = ORIENTED_EDGE('',*,*,#22360,.T.); +#22360 = EDGE_CURVE('',#22353,#22361,#22363,.T.); +#22361 = VERTEX_POINT('',#22362); +#22362 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#22363 = LINE('',#22364,#22365); +#22364 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#22365 = VECTOR('',#22366,1.); +#22366 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22367 = ORIENTED_EDGE('',*,*,#22368,.T.); +#22368 = EDGE_CURVE('',#22361,#22369,#22371,.T.); +#22369 = VERTEX_POINT('',#22370); +#22370 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#22371 = LINE('',#22372,#22373); +#22372 = CARTESIAN_POINT('',(0.1,-15.875,0.2)); +#22373 = VECTOR('',#22374,1.); +#22374 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22375 = ORIENTED_EDGE('',*,*,#22376,.T.); +#22376 = EDGE_CURVE('',#22369,#22321,#22377,.T.); +#22377 = LINE('',#22378,#22379); +#22378 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#22379 = VECTOR('',#22380,1.); +#22380 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22381 = FACE_BOUND('',#22382,.F.); +#22382 = EDGE_LOOP('',(#22383,#22393,#22401,#22409,#22417,#22425,#22433, + #22441)); +#22383 = ORIENTED_EDGE('',*,*,#22384,.F.); +#22384 = EDGE_CURVE('',#22385,#22387,#22389,.T.); +#22385 = VERTEX_POINT('',#22386); +#22386 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22387 = VERTEX_POINT('',#22388); +#22388 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#22389 = LINE('',#22390,#22391); +#22390 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22391 = VECTOR('',#22392,1.); +#22392 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22393 = ORIENTED_EDGE('',*,*,#22394,.T.); +#22394 = EDGE_CURVE('',#22385,#22395,#22397,.T.); +#22395 = VERTEX_POINT('',#22396); +#22396 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#22397 = LINE('',#22398,#22399); +#22398 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22399 = VECTOR('',#22400,1.); +#22400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22401 = ORIENTED_EDGE('',*,*,#22402,.F.); +#22402 = EDGE_CURVE('',#22403,#22395,#22405,.T.); +#22403 = VERTEX_POINT('',#22404); +#22404 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#22405 = LINE('',#22406,#22407); +#22406 = CARTESIAN_POINT('',(-0.1,-14.605,0.2)); +#22407 = VECTOR('',#22408,1.); +#22408 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22409 = ORIENTED_EDGE('',*,*,#22410,.T.); +#22410 = EDGE_CURVE('',#22403,#22411,#22413,.T.); +#22411 = VERTEX_POINT('',#22412); +#22412 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#22413 = LINE('',#22414,#22415); +#22414 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22415 = VECTOR('',#22416,1.); +#22416 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22417 = ORIENTED_EDGE('',*,*,#22418,.T.); +#22418 = EDGE_CURVE('',#22411,#22419,#22421,.T.); +#22419 = VERTEX_POINT('',#22420); +#22420 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#22421 = LINE('',#22422,#22423); +#22422 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#22423 = VECTOR('',#22424,1.); +#22424 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22425 = ORIENTED_EDGE('',*,*,#22426,.T.); +#22426 = EDGE_CURVE('',#22419,#22427,#22429,.T.); +#22427 = VERTEX_POINT('',#22428); +#22428 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#22429 = LINE('',#22430,#22431); +#22430 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#22431 = VECTOR('',#22432,1.); +#22432 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22433 = ORIENTED_EDGE('',*,*,#22434,.T.); +#22434 = EDGE_CURVE('',#22427,#22435,#22437,.T.); +#22435 = VERTEX_POINT('',#22436); +#22436 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#22437 = LINE('',#22438,#22439); +#22438 = CARTESIAN_POINT('',(0.1,-14.605,0.2)); +#22439 = VECTOR('',#22440,1.); +#22440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22441 = ORIENTED_EDGE('',*,*,#22442,.T.); +#22442 = EDGE_CURVE('',#22435,#22387,#22443,.T.); +#22443 = LINE('',#22444,#22445); +#22444 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#22445 = VECTOR('',#22446,1.); +#22446 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22447 = FACE_BOUND('',#22448,.F.); +#22448 = EDGE_LOOP('',(#22449,#22459,#22467,#22475,#22483,#22491,#22499, + #22507)); +#22449 = ORIENTED_EDGE('',*,*,#22450,.F.); +#22450 = EDGE_CURVE('',#22451,#22453,#22455,.T.); +#22451 = VERTEX_POINT('',#22452); +#22452 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22453 = VERTEX_POINT('',#22454); +#22454 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#22455 = LINE('',#22456,#22457); +#22456 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22457 = VECTOR('',#22458,1.); +#22458 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22459 = ORIENTED_EDGE('',*,*,#22460,.T.); +#22460 = EDGE_CURVE('',#22451,#22461,#22463,.T.); +#22461 = VERTEX_POINT('',#22462); +#22462 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#22463 = LINE('',#22464,#22465); +#22464 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22465 = VECTOR('',#22466,1.); +#22466 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22467 = ORIENTED_EDGE('',*,*,#22468,.F.); +#22468 = EDGE_CURVE('',#22469,#22461,#22471,.T.); +#22469 = VERTEX_POINT('',#22470); +#22470 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#22471 = LINE('',#22472,#22473); +#22472 = CARTESIAN_POINT('',(-0.1,-13.335,0.2)); +#22473 = VECTOR('',#22474,1.); +#22474 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22475 = ORIENTED_EDGE('',*,*,#22476,.T.); +#22476 = EDGE_CURVE('',#22469,#22477,#22479,.T.); +#22477 = VERTEX_POINT('',#22478); +#22478 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#22479 = LINE('',#22480,#22481); +#22480 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22481 = VECTOR('',#22482,1.); +#22482 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22483 = ORIENTED_EDGE('',*,*,#22484,.T.); +#22484 = EDGE_CURVE('',#22477,#22485,#22487,.T.); +#22485 = VERTEX_POINT('',#22486); +#22486 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#22487 = LINE('',#22488,#22489); +#22488 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#22489 = VECTOR('',#22490,1.); +#22490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22491 = ORIENTED_EDGE('',*,*,#22492,.T.); +#22492 = EDGE_CURVE('',#22485,#22493,#22495,.T.); +#22493 = VERTEX_POINT('',#22494); +#22494 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#22495 = LINE('',#22496,#22497); +#22496 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#22497 = VECTOR('',#22498,1.); +#22498 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22499 = ORIENTED_EDGE('',*,*,#22500,.T.); +#22500 = EDGE_CURVE('',#22493,#22501,#22503,.T.); +#22501 = VERTEX_POINT('',#22502); +#22502 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#22503 = LINE('',#22504,#22505); +#22504 = CARTESIAN_POINT('',(0.1,-13.335,0.2)); +#22505 = VECTOR('',#22506,1.); +#22506 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22507 = ORIENTED_EDGE('',*,*,#22508,.T.); +#22508 = EDGE_CURVE('',#22501,#22453,#22509,.T.); +#22509 = LINE('',#22510,#22511); +#22510 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#22511 = VECTOR('',#22512,1.); +#22512 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22513 = FACE_BOUND('',#22514,.F.); +#22514 = EDGE_LOOP('',(#22515,#22525,#22533,#22541,#22549,#22557,#22565, + #22573)); +#22515 = ORIENTED_EDGE('',*,*,#22516,.F.); +#22516 = EDGE_CURVE('',#22517,#22519,#22521,.T.); +#22517 = VERTEX_POINT('',#22518); +#22518 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22519 = VERTEX_POINT('',#22520); +#22520 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#22521 = LINE('',#22522,#22523); +#22522 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22523 = VECTOR('',#22524,1.); +#22524 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22525 = ORIENTED_EDGE('',*,*,#22526,.T.); +#22526 = EDGE_CURVE('',#22517,#22527,#22529,.T.); +#22527 = VERTEX_POINT('',#22528); +#22528 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#22529 = LINE('',#22530,#22531); +#22530 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22531 = VECTOR('',#22532,1.); +#22532 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22533 = ORIENTED_EDGE('',*,*,#22534,.F.); +#22534 = EDGE_CURVE('',#22535,#22527,#22537,.T.); +#22535 = VERTEX_POINT('',#22536); +#22536 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#22537 = LINE('',#22538,#22539); +#22538 = CARTESIAN_POINT('',(-0.1,-12.065,0.2)); +#22539 = VECTOR('',#22540,1.); +#22540 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22541 = ORIENTED_EDGE('',*,*,#22542,.T.); +#22542 = EDGE_CURVE('',#22535,#22543,#22545,.T.); +#22543 = VERTEX_POINT('',#22544); +#22544 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#22545 = LINE('',#22546,#22547); +#22546 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22547 = VECTOR('',#22548,1.); +#22548 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22549 = ORIENTED_EDGE('',*,*,#22550,.T.); +#22550 = EDGE_CURVE('',#22543,#22551,#22553,.T.); +#22551 = VERTEX_POINT('',#22552); +#22552 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#22553 = LINE('',#22554,#22555); +#22554 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#22555 = VECTOR('',#22556,1.); +#22556 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22557 = ORIENTED_EDGE('',*,*,#22558,.T.); +#22558 = EDGE_CURVE('',#22551,#22559,#22561,.T.); +#22559 = VERTEX_POINT('',#22560); +#22560 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#22561 = LINE('',#22562,#22563); +#22562 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#22563 = VECTOR('',#22564,1.); +#22564 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22565 = ORIENTED_EDGE('',*,*,#22566,.T.); +#22566 = EDGE_CURVE('',#22559,#22567,#22569,.T.); +#22567 = VERTEX_POINT('',#22568); +#22568 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#22569 = LINE('',#22570,#22571); +#22570 = CARTESIAN_POINT('',(0.1,-12.065,0.2)); +#22571 = VECTOR('',#22572,1.); +#22572 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22573 = ORIENTED_EDGE('',*,*,#22574,.T.); +#22574 = EDGE_CURVE('',#22567,#22519,#22575,.T.); +#22575 = LINE('',#22576,#22577); +#22576 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#22577 = VECTOR('',#22578,1.); +#22578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22579 = PLANE('',#22580); +#22580 = AXIS2_PLACEMENT_3D('',#22581,#22582,#22583); +#22581 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,0.2)); +#22582 = DIRECTION('',(0.,0.,1.)); +#22583 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#22584 = ADVANCED_FACE('',(#22585),#22591,.T.); +#22585 = FACE_BOUND('',#22586,.T.); +#22586 = EDGE_LOOP('',(#22587,#22588,#22589,#22590)); +#22587 = ORIENTED_EDGE('',*,*,#20405,.T.); +#22588 = ORIENTED_EDGE('',*,*,#21251,.T.); +#22589 = ORIENTED_EDGE('',*,*,#20484,.F.); +#22590 = ORIENTED_EDGE('',*,*,#20501,.F.); +#22591 = PLANE('',#22592); +#22592 = AXIS2_PLACEMENT_3D('',#22593,#22594,#22595); +#22593 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#22594 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22595 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22596 = ADVANCED_FACE('',(#22597),#22603,.F.); +#22597 = FACE_BOUND('',#22598,.F.); +#22598 = EDGE_LOOP('',(#22599,#22600,#22601,#22602)); +#22599 = ORIENTED_EDGE('',*,*,#20452,.T.); +#22600 = ORIENTED_EDGE('',*,*,#20517,.T.); +#22601 = ORIENTED_EDGE('',*,*,#20382,.F.); +#22602 = ORIENTED_EDGE('',*,*,#21220,.F.); +#22603 = PLANE('',#22604); +#22604 = AXIS2_PLACEMENT_3D('',#22605,#22606,#22607); +#22605 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#22606 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22607 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22608 = ADVANCED_FACE('',(#22609),#22634,.T.); +#22609 = FACE_BOUND('',#22610,.T.); +#22610 = EDGE_LOOP('',(#22611,#22619,#22620,#22628)); +#22611 = ORIENTED_EDGE('',*,*,#22612,.F.); +#22612 = EDGE_CURVE('',#20527,#22613,#22615,.T.); +#22613 = VERTEX_POINT('',#22614); +#22614 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#22615 = LINE('',#22616,#22617); +#22616 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#22617 = VECTOR('',#22618,1.); +#22618 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22619 = ORIENTED_EDGE('',*,*,#20526,.T.); +#22620 = ORIENTED_EDGE('',*,*,#22621,.T.); +#22621 = EDGE_CURVE('',#20529,#22622,#22624,.T.); +#22622 = VERTEX_POINT('',#22623); +#22623 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#22624 = LINE('',#22625,#22626); +#22625 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#22626 = VECTOR('',#22627,1.); +#22627 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22628 = ORIENTED_EDGE('',*,*,#22629,.F.); +#22629 = EDGE_CURVE('',#22613,#22622,#22630,.T.); +#22630 = LINE('',#22631,#22632); +#22631 = CARTESIAN_POINT('',(0.3,-48.86,8.2)); +#22632 = VECTOR('',#22633,1.); +#22633 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22634 = PLANE('',#22635); +#22635 = AXIS2_PLACEMENT_3D('',#22636,#22637,#22638); +#22636 = CARTESIAN_POINT('',(0.45,-48.86,8.35)); +#22637 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22638 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22639 = ADVANCED_FACE('',(#22640),#22658,.T.); +#22640 = FACE_BOUND('',#22641,.T.); +#22641 = EDGE_LOOP('',(#22642,#22643,#22644,#22652)); +#22642 = ORIENTED_EDGE('',*,*,#22621,.F.); +#22643 = ORIENTED_EDGE('',*,*,#20552,.T.); +#22644 = ORIENTED_EDGE('',*,*,#22645,.T.); +#22645 = EDGE_CURVE('',#20545,#22646,#22648,.T.); +#22646 = VERTEX_POINT('',#22647); +#22647 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#22648 = LINE('',#22649,#22650); +#22649 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#22650 = VECTOR('',#22651,1.); +#22651 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22652 = ORIENTED_EDGE('',*,*,#22653,.F.); +#22653 = EDGE_CURVE('',#22622,#22646,#22654,.T.); +#22654 = LINE('',#22655,#22656); +#22655 = CARTESIAN_POINT('',(0.6,-47.96,8.2)); +#22656 = VECTOR('',#22657,1.); +#22657 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22658 = PLANE('',#22659); +#22659 = AXIS2_PLACEMENT_3D('',#22660,#22661,#22662); +#22660 = CARTESIAN_POINT('',(0.6,-47.81,8.35)); +#22661 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22662 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22663 = ADVANCED_FACE('',(#22664),#22682,.T.); +#22664 = FACE_BOUND('',#22665,.T.); +#22665 = EDGE_LOOP('',(#22666,#22667,#22668,#22676)); +#22666 = ORIENTED_EDGE('',*,*,#22645,.F.); +#22667 = ORIENTED_EDGE('',*,*,#20544,.T.); +#22668 = ORIENTED_EDGE('',*,*,#22669,.T.); +#22669 = EDGE_CURVE('',#20537,#22670,#22672,.T.); +#22670 = VERTEX_POINT('',#22671); +#22671 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#22672 = LINE('',#22673,#22674); +#22673 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#22674 = VECTOR('',#22675,1.); +#22675 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22676 = ORIENTED_EDGE('',*,*,#22677,.F.); +#22677 = EDGE_CURVE('',#22646,#22670,#22678,.T.); +#22678 = LINE('',#22679,#22680); +#22679 = CARTESIAN_POINT('',(-0.3,-47.66,8.2)); +#22680 = VECTOR('',#22681,1.); +#22681 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22682 = PLANE('',#22683); +#22683 = AXIS2_PLACEMENT_3D('',#22684,#22685,#22686); +#22684 = CARTESIAN_POINT('',(-0.45,-47.66,8.35)); +#22685 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22686 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22687 = ADVANCED_FACE('',(#22688),#22699,.T.); +#22688 = FACE_BOUND('',#22689,.T.); +#22689 = EDGE_LOOP('',(#22690,#22691,#22692,#22693)); +#22690 = ORIENTED_EDGE('',*,*,#22669,.F.); +#22691 = ORIENTED_EDGE('',*,*,#20536,.T.); +#22692 = ORIENTED_EDGE('',*,*,#22612,.T.); +#22693 = ORIENTED_EDGE('',*,*,#22694,.F.); +#22694 = EDGE_CURVE('',#22670,#22613,#22695,.T.); +#22695 = LINE('',#22696,#22697); +#22696 = CARTESIAN_POINT('',(-0.6,-48.56,8.2)); +#22697 = VECTOR('',#22698,1.); +#22698 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22699 = PLANE('',#22700); +#22700 = AXIS2_PLACEMENT_3D('',#22701,#22702,#22703); +#22701 = CARTESIAN_POINT('',(-0.6,-48.71,8.35)); +#22702 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22703 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22704 = ADVANCED_FACE('',(#22705),#22730,.T.); +#22705 = FACE_BOUND('',#22706,.T.); +#22706 = EDGE_LOOP('',(#22707,#22715,#22716,#22724)); +#22707 = ORIENTED_EDGE('',*,*,#22708,.F.); +#22708 = EDGE_CURVE('',#20561,#22709,#22711,.T.); +#22709 = VERTEX_POINT('',#22710); +#22710 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#22711 = LINE('',#22712,#22713); +#22712 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#22713 = VECTOR('',#22714,1.); +#22714 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22715 = ORIENTED_EDGE('',*,*,#20560,.T.); +#22716 = ORIENTED_EDGE('',*,*,#22717,.T.); +#22717 = EDGE_CURVE('',#20563,#22718,#22720,.T.); +#22718 = VERTEX_POINT('',#22719); +#22719 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#22720 = LINE('',#22721,#22722); +#22721 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#22722 = VECTOR('',#22723,1.); +#22723 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22724 = ORIENTED_EDGE('',*,*,#22725,.F.); +#22725 = EDGE_CURVE('',#22709,#22718,#22726,.T.); +#22726 = LINE('',#22727,#22728); +#22727 = CARTESIAN_POINT('',(0.3,-46.32,8.2)); +#22728 = VECTOR('',#22729,1.); +#22729 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22730 = PLANE('',#22731); +#22731 = AXIS2_PLACEMENT_3D('',#22732,#22733,#22734); +#22732 = CARTESIAN_POINT('',(0.45,-46.32,8.35)); +#22733 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22734 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22735 = ADVANCED_FACE('',(#22736),#22754,.T.); +#22736 = FACE_BOUND('',#22737,.T.); +#22737 = EDGE_LOOP('',(#22738,#22739,#22740,#22748)); +#22738 = ORIENTED_EDGE('',*,*,#22717,.F.); +#22739 = ORIENTED_EDGE('',*,*,#20586,.T.); +#22740 = ORIENTED_EDGE('',*,*,#22741,.T.); +#22741 = EDGE_CURVE('',#20579,#22742,#22744,.T.); +#22742 = VERTEX_POINT('',#22743); +#22743 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#22744 = LINE('',#22745,#22746); +#22745 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#22746 = VECTOR('',#22747,1.); +#22747 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22748 = ORIENTED_EDGE('',*,*,#22749,.F.); +#22749 = EDGE_CURVE('',#22718,#22742,#22750,.T.); +#22750 = LINE('',#22751,#22752); +#22751 = CARTESIAN_POINT('',(0.6,-45.42,8.2)); +#22752 = VECTOR('',#22753,1.); +#22753 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22754 = PLANE('',#22755); +#22755 = AXIS2_PLACEMENT_3D('',#22756,#22757,#22758); +#22756 = CARTESIAN_POINT('',(0.6,-45.27,8.35)); +#22757 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22758 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22759 = ADVANCED_FACE('',(#22760),#22778,.T.); +#22760 = FACE_BOUND('',#22761,.T.); +#22761 = EDGE_LOOP('',(#22762,#22763,#22764,#22772)); +#22762 = ORIENTED_EDGE('',*,*,#22741,.F.); +#22763 = ORIENTED_EDGE('',*,*,#20578,.T.); +#22764 = ORIENTED_EDGE('',*,*,#22765,.T.); +#22765 = EDGE_CURVE('',#20571,#22766,#22768,.T.); +#22766 = VERTEX_POINT('',#22767); +#22767 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#22768 = LINE('',#22769,#22770); +#22769 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#22770 = VECTOR('',#22771,1.); +#22771 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22772 = ORIENTED_EDGE('',*,*,#22773,.F.); +#22773 = EDGE_CURVE('',#22742,#22766,#22774,.T.); +#22774 = LINE('',#22775,#22776); +#22775 = CARTESIAN_POINT('',(-0.3,-45.12,8.2)); +#22776 = VECTOR('',#22777,1.); +#22777 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22778 = PLANE('',#22779); +#22779 = AXIS2_PLACEMENT_3D('',#22780,#22781,#22782); +#22780 = CARTESIAN_POINT('',(-0.45,-45.12,8.35)); +#22781 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22782 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22783 = ADVANCED_FACE('',(#22784),#22795,.T.); +#22784 = FACE_BOUND('',#22785,.T.); +#22785 = EDGE_LOOP('',(#22786,#22787,#22788,#22789)); +#22786 = ORIENTED_EDGE('',*,*,#22765,.F.); +#22787 = ORIENTED_EDGE('',*,*,#20570,.T.); +#22788 = ORIENTED_EDGE('',*,*,#22708,.T.); +#22789 = ORIENTED_EDGE('',*,*,#22790,.F.); +#22790 = EDGE_CURVE('',#22766,#22709,#22791,.T.); +#22791 = LINE('',#22792,#22793); +#22792 = CARTESIAN_POINT('',(-0.6,-46.02,8.2)); +#22793 = VECTOR('',#22794,1.); +#22794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22795 = PLANE('',#22796); +#22796 = AXIS2_PLACEMENT_3D('',#22797,#22798,#22799); +#22797 = CARTESIAN_POINT('',(-0.6,-46.17,8.35)); +#22798 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22799 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22800 = ADVANCED_FACE('',(#22801),#22826,.T.); +#22801 = FACE_BOUND('',#22802,.T.); +#22802 = EDGE_LOOP('',(#22803,#22811,#22812,#22820)); +#22803 = ORIENTED_EDGE('',*,*,#22804,.F.); +#22804 = EDGE_CURVE('',#20595,#22805,#22807,.T.); +#22805 = VERTEX_POINT('',#22806); +#22806 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#22807 = LINE('',#22808,#22809); +#22808 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#22809 = VECTOR('',#22810,1.); +#22810 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22811 = ORIENTED_EDGE('',*,*,#20594,.T.); +#22812 = ORIENTED_EDGE('',*,*,#22813,.T.); +#22813 = EDGE_CURVE('',#20597,#22814,#22816,.T.); +#22814 = VERTEX_POINT('',#22815); +#22815 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#22816 = LINE('',#22817,#22818); +#22817 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#22818 = VECTOR('',#22819,1.); +#22819 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22820 = ORIENTED_EDGE('',*,*,#22821,.F.); +#22821 = EDGE_CURVE('',#22805,#22814,#22822,.T.); +#22822 = LINE('',#22823,#22824); +#22823 = CARTESIAN_POINT('',(0.3,-43.78,8.2)); +#22824 = VECTOR('',#22825,1.); +#22825 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22826 = PLANE('',#22827); +#22827 = AXIS2_PLACEMENT_3D('',#22828,#22829,#22830); +#22828 = CARTESIAN_POINT('',(0.45,-43.78,8.35)); +#22829 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22830 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22831 = ADVANCED_FACE('',(#22832),#22850,.T.); +#22832 = FACE_BOUND('',#22833,.T.); +#22833 = EDGE_LOOP('',(#22834,#22835,#22836,#22844)); +#22834 = ORIENTED_EDGE('',*,*,#22813,.F.); +#22835 = ORIENTED_EDGE('',*,*,#20620,.T.); +#22836 = ORIENTED_EDGE('',*,*,#22837,.T.); +#22837 = EDGE_CURVE('',#20613,#22838,#22840,.T.); +#22838 = VERTEX_POINT('',#22839); +#22839 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#22840 = LINE('',#22841,#22842); +#22841 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#22842 = VECTOR('',#22843,1.); +#22843 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22844 = ORIENTED_EDGE('',*,*,#22845,.F.); +#22845 = EDGE_CURVE('',#22814,#22838,#22846,.T.); +#22846 = LINE('',#22847,#22848); +#22847 = CARTESIAN_POINT('',(0.6,-42.88,8.2)); +#22848 = VECTOR('',#22849,1.); +#22849 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22850 = PLANE('',#22851); +#22851 = AXIS2_PLACEMENT_3D('',#22852,#22853,#22854); +#22852 = CARTESIAN_POINT('',(0.6,-42.73,8.35)); +#22853 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22854 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22855 = ADVANCED_FACE('',(#22856),#22874,.T.); +#22856 = FACE_BOUND('',#22857,.T.); +#22857 = EDGE_LOOP('',(#22858,#22859,#22860,#22868)); +#22858 = ORIENTED_EDGE('',*,*,#22837,.F.); +#22859 = ORIENTED_EDGE('',*,*,#20612,.T.); +#22860 = ORIENTED_EDGE('',*,*,#22861,.T.); +#22861 = EDGE_CURVE('',#20605,#22862,#22864,.T.); +#22862 = VERTEX_POINT('',#22863); +#22863 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#22864 = LINE('',#22865,#22866); +#22865 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#22866 = VECTOR('',#22867,1.); +#22867 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22868 = ORIENTED_EDGE('',*,*,#22869,.F.); +#22869 = EDGE_CURVE('',#22838,#22862,#22870,.T.); +#22870 = LINE('',#22871,#22872); +#22871 = CARTESIAN_POINT('',(-0.3,-42.58,8.2)); +#22872 = VECTOR('',#22873,1.); +#22873 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22874 = PLANE('',#22875); +#22875 = AXIS2_PLACEMENT_3D('',#22876,#22877,#22878); +#22876 = CARTESIAN_POINT('',(-0.45,-42.58,8.35)); +#22877 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22878 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22879 = ADVANCED_FACE('',(#22880),#22891,.T.); +#22880 = FACE_BOUND('',#22881,.T.); +#22881 = EDGE_LOOP('',(#22882,#22883,#22884,#22885)); +#22882 = ORIENTED_EDGE('',*,*,#22861,.F.); +#22883 = ORIENTED_EDGE('',*,*,#20604,.T.); +#22884 = ORIENTED_EDGE('',*,*,#22804,.T.); +#22885 = ORIENTED_EDGE('',*,*,#22886,.F.); +#22886 = EDGE_CURVE('',#22862,#22805,#22887,.T.); +#22887 = LINE('',#22888,#22889); +#22888 = CARTESIAN_POINT('',(-0.6,-43.48,8.2)); +#22889 = VECTOR('',#22890,1.); +#22890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22891 = PLANE('',#22892); +#22892 = AXIS2_PLACEMENT_3D('',#22893,#22894,#22895); +#22893 = CARTESIAN_POINT('',(-0.6,-43.63,8.35)); +#22894 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22895 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22896 = ADVANCED_FACE('',(#22897),#22922,.T.); +#22897 = FACE_BOUND('',#22898,.T.); +#22898 = EDGE_LOOP('',(#22899,#22907,#22908,#22916)); +#22899 = ORIENTED_EDGE('',*,*,#22900,.F.); +#22900 = EDGE_CURVE('',#20629,#22901,#22903,.T.); +#22901 = VERTEX_POINT('',#22902); +#22902 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#22903 = LINE('',#22904,#22905); +#22904 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#22905 = VECTOR('',#22906,1.); +#22906 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22907 = ORIENTED_EDGE('',*,*,#20628,.T.); +#22908 = ORIENTED_EDGE('',*,*,#22909,.T.); +#22909 = EDGE_CURVE('',#20631,#22910,#22912,.T.); +#22910 = VERTEX_POINT('',#22911); +#22911 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#22912 = LINE('',#22913,#22914); +#22913 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#22914 = VECTOR('',#22915,1.); +#22915 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22916 = ORIENTED_EDGE('',*,*,#22917,.F.); +#22917 = EDGE_CURVE('',#22901,#22910,#22918,.T.); +#22918 = LINE('',#22919,#22920); +#22919 = CARTESIAN_POINT('',(0.3,-41.24,8.2)); +#22920 = VECTOR('',#22921,1.); +#22921 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22922 = PLANE('',#22923); +#22923 = AXIS2_PLACEMENT_3D('',#22924,#22925,#22926); +#22924 = CARTESIAN_POINT('',(0.45,-41.24,8.35)); +#22925 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22926 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22927 = ADVANCED_FACE('',(#22928),#22946,.T.); +#22928 = FACE_BOUND('',#22929,.T.); +#22929 = EDGE_LOOP('',(#22930,#22931,#22932,#22940)); +#22930 = ORIENTED_EDGE('',*,*,#22909,.F.); +#22931 = ORIENTED_EDGE('',*,*,#20654,.T.); +#22932 = ORIENTED_EDGE('',*,*,#22933,.T.); +#22933 = EDGE_CURVE('',#20647,#22934,#22936,.T.); +#22934 = VERTEX_POINT('',#22935); +#22935 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#22936 = LINE('',#22937,#22938); +#22937 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#22938 = VECTOR('',#22939,1.); +#22939 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22940 = ORIENTED_EDGE('',*,*,#22941,.F.); +#22941 = EDGE_CURVE('',#22910,#22934,#22942,.T.); +#22942 = LINE('',#22943,#22944); +#22943 = CARTESIAN_POINT('',(0.6,-40.34,8.2)); +#22944 = VECTOR('',#22945,1.); +#22945 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22946 = PLANE('',#22947); +#22947 = AXIS2_PLACEMENT_3D('',#22948,#22949,#22950); +#22948 = CARTESIAN_POINT('',(0.6,-40.19,8.35)); +#22949 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22950 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22951 = ADVANCED_FACE('',(#22952),#22970,.T.); +#22952 = FACE_BOUND('',#22953,.T.); +#22953 = EDGE_LOOP('',(#22954,#22955,#22956,#22964)); +#22954 = ORIENTED_EDGE('',*,*,#22933,.F.); +#22955 = ORIENTED_EDGE('',*,*,#20646,.T.); +#22956 = ORIENTED_EDGE('',*,*,#22957,.T.); +#22957 = EDGE_CURVE('',#20639,#22958,#22960,.T.); +#22958 = VERTEX_POINT('',#22959); +#22959 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#22960 = LINE('',#22961,#22962); +#22961 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#22962 = VECTOR('',#22963,1.); +#22963 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22964 = ORIENTED_EDGE('',*,*,#22965,.F.); +#22965 = EDGE_CURVE('',#22934,#22958,#22966,.T.); +#22966 = LINE('',#22967,#22968); +#22967 = CARTESIAN_POINT('',(-0.3,-40.04,8.2)); +#22968 = VECTOR('',#22969,1.); +#22969 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22970 = PLANE('',#22971); +#22971 = AXIS2_PLACEMENT_3D('',#22972,#22973,#22974); +#22972 = CARTESIAN_POINT('',(-0.45,-40.04,8.35)); +#22973 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22974 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22975 = ADVANCED_FACE('',(#22976),#22987,.T.); +#22976 = FACE_BOUND('',#22977,.T.); +#22977 = EDGE_LOOP('',(#22978,#22979,#22980,#22981)); +#22978 = ORIENTED_EDGE('',*,*,#22957,.F.); +#22979 = ORIENTED_EDGE('',*,*,#20638,.T.); +#22980 = ORIENTED_EDGE('',*,*,#22900,.T.); +#22981 = ORIENTED_EDGE('',*,*,#22982,.F.); +#22982 = EDGE_CURVE('',#22958,#22901,#22983,.T.); +#22983 = LINE('',#22984,#22985); +#22984 = CARTESIAN_POINT('',(-0.6,-40.94,8.2)); +#22985 = VECTOR('',#22986,1.); +#22986 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22987 = PLANE('',#22988); +#22988 = AXIS2_PLACEMENT_3D('',#22989,#22990,#22991); +#22989 = CARTESIAN_POINT('',(-0.6,-41.09,8.35)); +#22990 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22991 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22992 = ADVANCED_FACE('',(#22993),#23018,.T.); +#22993 = FACE_BOUND('',#22994,.T.); +#22994 = EDGE_LOOP('',(#22995,#23003,#23004,#23012)); +#22995 = ORIENTED_EDGE('',*,*,#22996,.F.); +#22996 = EDGE_CURVE('',#20663,#22997,#22999,.T.); +#22997 = VERTEX_POINT('',#22998); +#22998 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#22999 = LINE('',#23000,#23001); +#23000 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#23001 = VECTOR('',#23002,1.); +#23002 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23003 = ORIENTED_EDGE('',*,*,#20662,.T.); +#23004 = ORIENTED_EDGE('',*,*,#23005,.T.); +#23005 = EDGE_CURVE('',#20665,#23006,#23008,.T.); +#23006 = VERTEX_POINT('',#23007); +#23007 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#23008 = LINE('',#23009,#23010); +#23009 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#23010 = VECTOR('',#23011,1.); +#23011 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23012 = ORIENTED_EDGE('',*,*,#23013,.F.); +#23013 = EDGE_CURVE('',#22997,#23006,#23014,.T.); +#23014 = LINE('',#23015,#23016); +#23015 = CARTESIAN_POINT('',(0.3,-38.7,8.2)); +#23016 = VECTOR('',#23017,1.); +#23017 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23018 = PLANE('',#23019); +#23019 = AXIS2_PLACEMENT_3D('',#23020,#23021,#23022); +#23020 = CARTESIAN_POINT('',(0.45,-38.7,8.35)); +#23021 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23022 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23023 = ADVANCED_FACE('',(#23024),#23042,.T.); +#23024 = FACE_BOUND('',#23025,.T.); +#23025 = EDGE_LOOP('',(#23026,#23027,#23028,#23036)); +#23026 = ORIENTED_EDGE('',*,*,#23005,.F.); +#23027 = ORIENTED_EDGE('',*,*,#20688,.T.); +#23028 = ORIENTED_EDGE('',*,*,#23029,.T.); +#23029 = EDGE_CURVE('',#20681,#23030,#23032,.T.); +#23030 = VERTEX_POINT('',#23031); +#23031 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#23032 = LINE('',#23033,#23034); +#23033 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#23034 = VECTOR('',#23035,1.); +#23035 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23036 = ORIENTED_EDGE('',*,*,#23037,.F.); +#23037 = EDGE_CURVE('',#23006,#23030,#23038,.T.); +#23038 = LINE('',#23039,#23040); +#23039 = CARTESIAN_POINT('',(0.6,-37.8,8.2)); +#23040 = VECTOR('',#23041,1.); +#23041 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23042 = PLANE('',#23043); +#23043 = AXIS2_PLACEMENT_3D('',#23044,#23045,#23046); +#23044 = CARTESIAN_POINT('',(0.6,-37.65,8.35)); +#23045 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23046 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23047 = ADVANCED_FACE('',(#23048),#23066,.T.); +#23048 = FACE_BOUND('',#23049,.T.); +#23049 = EDGE_LOOP('',(#23050,#23051,#23052,#23060)); +#23050 = ORIENTED_EDGE('',*,*,#23029,.F.); +#23051 = ORIENTED_EDGE('',*,*,#20680,.T.); +#23052 = ORIENTED_EDGE('',*,*,#23053,.T.); +#23053 = EDGE_CURVE('',#20673,#23054,#23056,.T.); +#23054 = VERTEX_POINT('',#23055); +#23055 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#23056 = LINE('',#23057,#23058); +#23057 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#23058 = VECTOR('',#23059,1.); +#23059 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23060 = ORIENTED_EDGE('',*,*,#23061,.F.); +#23061 = EDGE_CURVE('',#23030,#23054,#23062,.T.); +#23062 = LINE('',#23063,#23064); +#23063 = CARTESIAN_POINT('',(-0.3,-37.5,8.2)); +#23064 = VECTOR('',#23065,1.); +#23065 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23066 = PLANE('',#23067); +#23067 = AXIS2_PLACEMENT_3D('',#23068,#23069,#23070); +#23068 = CARTESIAN_POINT('',(-0.45,-37.5,8.35)); +#23069 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23070 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23071 = ADVANCED_FACE('',(#23072),#23083,.T.); +#23072 = FACE_BOUND('',#23073,.T.); +#23073 = EDGE_LOOP('',(#23074,#23075,#23076,#23077)); +#23074 = ORIENTED_EDGE('',*,*,#23053,.F.); +#23075 = ORIENTED_EDGE('',*,*,#20672,.T.); +#23076 = ORIENTED_EDGE('',*,*,#22996,.T.); +#23077 = ORIENTED_EDGE('',*,*,#23078,.F.); +#23078 = EDGE_CURVE('',#23054,#22997,#23079,.T.); +#23079 = LINE('',#23080,#23081); +#23080 = CARTESIAN_POINT('',(-0.6,-38.4,8.2)); +#23081 = VECTOR('',#23082,1.); +#23082 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23083 = PLANE('',#23084); +#23084 = AXIS2_PLACEMENT_3D('',#23085,#23086,#23087); +#23085 = CARTESIAN_POINT('',(-0.6,-38.55,8.35)); +#23086 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23087 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23088 = ADVANCED_FACE('',(#23089),#23114,.T.); +#23089 = FACE_BOUND('',#23090,.T.); +#23090 = EDGE_LOOP('',(#23091,#23099,#23100,#23108)); +#23091 = ORIENTED_EDGE('',*,*,#23092,.F.); +#23092 = EDGE_CURVE('',#20697,#23093,#23095,.T.); +#23093 = VERTEX_POINT('',#23094); +#23094 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#23095 = LINE('',#23096,#23097); +#23096 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#23097 = VECTOR('',#23098,1.); +#23098 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23099 = ORIENTED_EDGE('',*,*,#20696,.T.); +#23100 = ORIENTED_EDGE('',*,*,#23101,.T.); +#23101 = EDGE_CURVE('',#20699,#23102,#23104,.T.); +#23102 = VERTEX_POINT('',#23103); +#23103 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#23104 = LINE('',#23105,#23106); +#23105 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#23106 = VECTOR('',#23107,1.); +#23107 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23108 = ORIENTED_EDGE('',*,*,#23109,.F.); +#23109 = EDGE_CURVE('',#23093,#23102,#23110,.T.); +#23110 = LINE('',#23111,#23112); +#23111 = CARTESIAN_POINT('',(0.3,-36.16,8.2)); +#23112 = VECTOR('',#23113,1.); +#23113 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23114 = PLANE('',#23115); +#23115 = AXIS2_PLACEMENT_3D('',#23116,#23117,#23118); +#23116 = CARTESIAN_POINT('',(0.45,-36.16,8.35)); +#23117 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23118 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23119 = ADVANCED_FACE('',(#23120),#23138,.T.); +#23120 = FACE_BOUND('',#23121,.T.); +#23121 = EDGE_LOOP('',(#23122,#23123,#23124,#23132)); +#23122 = ORIENTED_EDGE('',*,*,#23101,.F.); +#23123 = ORIENTED_EDGE('',*,*,#20722,.T.); +#23124 = ORIENTED_EDGE('',*,*,#23125,.T.); +#23125 = EDGE_CURVE('',#20715,#23126,#23128,.T.); +#23126 = VERTEX_POINT('',#23127); +#23127 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#23128 = LINE('',#23129,#23130); +#23129 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#23130 = VECTOR('',#23131,1.); +#23131 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23132 = ORIENTED_EDGE('',*,*,#23133,.F.); +#23133 = EDGE_CURVE('',#23102,#23126,#23134,.T.); +#23134 = LINE('',#23135,#23136); +#23135 = CARTESIAN_POINT('',(0.6,-35.26,8.2)); +#23136 = VECTOR('',#23137,1.); +#23137 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23138 = PLANE('',#23139); +#23139 = AXIS2_PLACEMENT_3D('',#23140,#23141,#23142); +#23140 = CARTESIAN_POINT('',(0.6,-35.11,8.35)); +#23141 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23142 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23143 = ADVANCED_FACE('',(#23144),#23162,.T.); +#23144 = FACE_BOUND('',#23145,.T.); +#23145 = EDGE_LOOP('',(#23146,#23147,#23148,#23156)); +#23146 = ORIENTED_EDGE('',*,*,#23125,.F.); +#23147 = ORIENTED_EDGE('',*,*,#20714,.T.); +#23148 = ORIENTED_EDGE('',*,*,#23149,.T.); +#23149 = EDGE_CURVE('',#20707,#23150,#23152,.T.); +#23150 = VERTEX_POINT('',#23151); +#23151 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#23152 = LINE('',#23153,#23154); +#23153 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#23154 = VECTOR('',#23155,1.); +#23155 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23156 = ORIENTED_EDGE('',*,*,#23157,.F.); +#23157 = EDGE_CURVE('',#23126,#23150,#23158,.T.); +#23158 = LINE('',#23159,#23160); +#23159 = CARTESIAN_POINT('',(-0.3,-34.96,8.2)); +#23160 = VECTOR('',#23161,1.); +#23161 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23162 = PLANE('',#23163); +#23163 = AXIS2_PLACEMENT_3D('',#23164,#23165,#23166); +#23164 = CARTESIAN_POINT('',(-0.45,-34.96,8.35)); +#23165 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23166 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23167 = ADVANCED_FACE('',(#23168),#23179,.T.); +#23168 = FACE_BOUND('',#23169,.T.); +#23169 = EDGE_LOOP('',(#23170,#23171,#23172,#23173)); +#23170 = ORIENTED_EDGE('',*,*,#23149,.F.); +#23171 = ORIENTED_EDGE('',*,*,#20706,.T.); +#23172 = ORIENTED_EDGE('',*,*,#23092,.T.); +#23173 = ORIENTED_EDGE('',*,*,#23174,.F.); +#23174 = EDGE_CURVE('',#23150,#23093,#23175,.T.); +#23175 = LINE('',#23176,#23177); +#23176 = CARTESIAN_POINT('',(-0.6,-35.86,8.2)); +#23177 = VECTOR('',#23178,1.); +#23178 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23179 = PLANE('',#23180); +#23180 = AXIS2_PLACEMENT_3D('',#23181,#23182,#23183); +#23181 = CARTESIAN_POINT('',(-0.6,-36.01,8.35)); +#23182 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23183 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23184 = ADVANCED_FACE('',(#23185),#23210,.T.); +#23185 = FACE_BOUND('',#23186,.T.); +#23186 = EDGE_LOOP('',(#23187,#23195,#23196,#23204)); +#23187 = ORIENTED_EDGE('',*,*,#23188,.F.); +#23188 = EDGE_CURVE('',#20731,#23189,#23191,.T.); +#23189 = VERTEX_POINT('',#23190); +#23190 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#23191 = LINE('',#23192,#23193); +#23192 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#23193 = VECTOR('',#23194,1.); +#23194 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23195 = ORIENTED_EDGE('',*,*,#20730,.T.); +#23196 = ORIENTED_EDGE('',*,*,#23197,.T.); +#23197 = EDGE_CURVE('',#20733,#23198,#23200,.T.); +#23198 = VERTEX_POINT('',#23199); +#23199 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#23200 = LINE('',#23201,#23202); +#23201 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#23202 = VECTOR('',#23203,1.); +#23203 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23204 = ORIENTED_EDGE('',*,*,#23205,.F.); +#23205 = EDGE_CURVE('',#23189,#23198,#23206,.T.); +#23206 = LINE('',#23207,#23208); +#23207 = CARTESIAN_POINT('',(0.3,-33.62,8.2)); +#23208 = VECTOR('',#23209,1.); +#23209 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23210 = PLANE('',#23211); +#23211 = AXIS2_PLACEMENT_3D('',#23212,#23213,#23214); +#23212 = CARTESIAN_POINT('',(0.45,-33.62,8.35)); +#23213 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23214 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23215 = ADVANCED_FACE('',(#23216),#23234,.T.); +#23216 = FACE_BOUND('',#23217,.T.); +#23217 = EDGE_LOOP('',(#23218,#23219,#23220,#23228)); +#23218 = ORIENTED_EDGE('',*,*,#23197,.F.); +#23219 = ORIENTED_EDGE('',*,*,#20756,.T.); +#23220 = ORIENTED_EDGE('',*,*,#23221,.T.); +#23221 = EDGE_CURVE('',#20749,#23222,#23224,.T.); +#23222 = VERTEX_POINT('',#23223); +#23223 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#23224 = LINE('',#23225,#23226); +#23225 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#23226 = VECTOR('',#23227,1.); +#23227 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23228 = ORIENTED_EDGE('',*,*,#23229,.F.); +#23229 = EDGE_CURVE('',#23198,#23222,#23230,.T.); +#23230 = LINE('',#23231,#23232); +#23231 = CARTESIAN_POINT('',(0.6,-32.72,8.2)); +#23232 = VECTOR('',#23233,1.); +#23233 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23234 = PLANE('',#23235); +#23235 = AXIS2_PLACEMENT_3D('',#23236,#23237,#23238); +#23236 = CARTESIAN_POINT('',(0.6,-32.57,8.35)); +#23237 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23238 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23239 = ADVANCED_FACE('',(#23240),#23258,.T.); +#23240 = FACE_BOUND('',#23241,.T.); +#23241 = EDGE_LOOP('',(#23242,#23243,#23244,#23252)); +#23242 = ORIENTED_EDGE('',*,*,#23221,.F.); +#23243 = ORIENTED_EDGE('',*,*,#20748,.T.); +#23244 = ORIENTED_EDGE('',*,*,#23245,.T.); +#23245 = EDGE_CURVE('',#20741,#23246,#23248,.T.); +#23246 = VERTEX_POINT('',#23247); +#23247 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#23248 = LINE('',#23249,#23250); +#23249 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#23250 = VECTOR('',#23251,1.); +#23251 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23252 = ORIENTED_EDGE('',*,*,#23253,.F.); +#23253 = EDGE_CURVE('',#23222,#23246,#23254,.T.); +#23254 = LINE('',#23255,#23256); +#23255 = CARTESIAN_POINT('',(-0.3,-32.42,8.2)); +#23256 = VECTOR('',#23257,1.); +#23257 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23258 = PLANE('',#23259); +#23259 = AXIS2_PLACEMENT_3D('',#23260,#23261,#23262); +#23260 = CARTESIAN_POINT('',(-0.45,-32.42,8.35)); +#23261 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23262 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23263 = ADVANCED_FACE('',(#23264),#23275,.T.); +#23264 = FACE_BOUND('',#23265,.T.); +#23265 = EDGE_LOOP('',(#23266,#23267,#23268,#23269)); +#23266 = ORIENTED_EDGE('',*,*,#23245,.F.); +#23267 = ORIENTED_EDGE('',*,*,#20740,.T.); +#23268 = ORIENTED_EDGE('',*,*,#23188,.T.); +#23269 = ORIENTED_EDGE('',*,*,#23270,.F.); +#23270 = EDGE_CURVE('',#23246,#23189,#23271,.T.); +#23271 = LINE('',#23272,#23273); +#23272 = CARTESIAN_POINT('',(-0.6,-33.32,8.2)); +#23273 = VECTOR('',#23274,1.); +#23274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23275 = PLANE('',#23276); +#23276 = AXIS2_PLACEMENT_3D('',#23277,#23278,#23279); +#23277 = CARTESIAN_POINT('',(-0.6,-33.47,8.35)); +#23278 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23279 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23280 = ADVANCED_FACE('',(#23281),#23306,.T.); +#23281 = FACE_BOUND('',#23282,.T.); +#23282 = EDGE_LOOP('',(#23283,#23291,#23292,#23300)); +#23283 = ORIENTED_EDGE('',*,*,#23284,.F.); +#23284 = EDGE_CURVE('',#20765,#23285,#23287,.T.); +#23285 = VERTEX_POINT('',#23286); +#23286 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#23287 = LINE('',#23288,#23289); +#23288 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#23289 = VECTOR('',#23290,1.); +#23290 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23291 = ORIENTED_EDGE('',*,*,#20764,.T.); +#23292 = ORIENTED_EDGE('',*,*,#23293,.T.); +#23293 = EDGE_CURVE('',#20767,#23294,#23296,.T.); +#23294 = VERTEX_POINT('',#23295); +#23295 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#23296 = LINE('',#23297,#23298); +#23297 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#23298 = VECTOR('',#23299,1.); +#23299 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23300 = ORIENTED_EDGE('',*,*,#23301,.F.); +#23301 = EDGE_CURVE('',#23285,#23294,#23302,.T.); +#23302 = LINE('',#23303,#23304); +#23303 = CARTESIAN_POINT('',(0.3,-31.08,8.2)); +#23304 = VECTOR('',#23305,1.); +#23305 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23306 = PLANE('',#23307); +#23307 = AXIS2_PLACEMENT_3D('',#23308,#23309,#23310); +#23308 = CARTESIAN_POINT('',(0.45,-31.08,8.35)); +#23309 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23310 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23311 = ADVANCED_FACE('',(#23312),#23330,.T.); +#23312 = FACE_BOUND('',#23313,.T.); +#23313 = EDGE_LOOP('',(#23314,#23315,#23316,#23324)); +#23314 = ORIENTED_EDGE('',*,*,#23293,.F.); +#23315 = ORIENTED_EDGE('',*,*,#20790,.T.); +#23316 = ORIENTED_EDGE('',*,*,#23317,.T.); +#23317 = EDGE_CURVE('',#20783,#23318,#23320,.T.); +#23318 = VERTEX_POINT('',#23319); +#23319 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#23320 = LINE('',#23321,#23322); +#23321 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#23322 = VECTOR('',#23323,1.); +#23323 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23324 = ORIENTED_EDGE('',*,*,#23325,.F.); +#23325 = EDGE_CURVE('',#23294,#23318,#23326,.T.); +#23326 = LINE('',#23327,#23328); +#23327 = CARTESIAN_POINT('',(0.6,-30.18,8.2)); +#23328 = VECTOR('',#23329,1.); +#23329 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23330 = PLANE('',#23331); +#23331 = AXIS2_PLACEMENT_3D('',#23332,#23333,#23334); +#23332 = CARTESIAN_POINT('',(0.6,-30.03,8.35)); +#23333 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23334 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23335 = ADVANCED_FACE('',(#23336),#23354,.T.); +#23336 = FACE_BOUND('',#23337,.T.); +#23337 = EDGE_LOOP('',(#23338,#23339,#23340,#23348)); +#23338 = ORIENTED_EDGE('',*,*,#23317,.F.); +#23339 = ORIENTED_EDGE('',*,*,#20782,.T.); +#23340 = ORIENTED_EDGE('',*,*,#23341,.T.); +#23341 = EDGE_CURVE('',#20775,#23342,#23344,.T.); +#23342 = VERTEX_POINT('',#23343); +#23343 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#23344 = LINE('',#23345,#23346); +#23345 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#23346 = VECTOR('',#23347,1.); +#23347 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23348 = ORIENTED_EDGE('',*,*,#23349,.F.); +#23349 = EDGE_CURVE('',#23318,#23342,#23350,.T.); +#23350 = LINE('',#23351,#23352); +#23351 = CARTESIAN_POINT('',(-0.3,-29.88,8.2)); +#23352 = VECTOR('',#23353,1.); +#23353 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23354 = PLANE('',#23355); +#23355 = AXIS2_PLACEMENT_3D('',#23356,#23357,#23358); +#23356 = CARTESIAN_POINT('',(-0.45,-29.88,8.35)); +#23357 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23358 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23359 = ADVANCED_FACE('',(#23360),#23371,.T.); +#23360 = FACE_BOUND('',#23361,.T.); +#23361 = EDGE_LOOP('',(#23362,#23363,#23364,#23365)); +#23362 = ORIENTED_EDGE('',*,*,#23341,.F.); +#23363 = ORIENTED_EDGE('',*,*,#20774,.T.); +#23364 = ORIENTED_EDGE('',*,*,#23284,.T.); +#23365 = ORIENTED_EDGE('',*,*,#23366,.F.); +#23366 = EDGE_CURVE('',#23342,#23285,#23367,.T.); +#23367 = LINE('',#23368,#23369); +#23368 = CARTESIAN_POINT('',(-0.6,-30.78,8.2)); +#23369 = VECTOR('',#23370,1.); +#23370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23371 = PLANE('',#23372); +#23372 = AXIS2_PLACEMENT_3D('',#23373,#23374,#23375); +#23373 = CARTESIAN_POINT('',(-0.6,-30.93,8.35)); +#23374 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23375 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23376 = ADVANCED_FACE('',(#23377),#23402,.T.); +#23377 = FACE_BOUND('',#23378,.T.); +#23378 = EDGE_LOOP('',(#23379,#23387,#23388,#23396)); +#23379 = ORIENTED_EDGE('',*,*,#23380,.F.); +#23380 = EDGE_CURVE('',#20799,#23381,#23383,.T.); +#23381 = VERTEX_POINT('',#23382); +#23382 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#23383 = LINE('',#23384,#23385); +#23384 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#23385 = VECTOR('',#23386,1.); +#23386 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23387 = ORIENTED_EDGE('',*,*,#20798,.T.); +#23388 = ORIENTED_EDGE('',*,*,#23389,.T.); +#23389 = EDGE_CURVE('',#20801,#23390,#23392,.T.); +#23390 = VERTEX_POINT('',#23391); +#23391 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#23392 = LINE('',#23393,#23394); +#23393 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#23394 = VECTOR('',#23395,1.); +#23395 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23396 = ORIENTED_EDGE('',*,*,#23397,.F.); +#23397 = EDGE_CURVE('',#23381,#23390,#23398,.T.); +#23398 = LINE('',#23399,#23400); +#23399 = CARTESIAN_POINT('',(0.3,-28.54,8.2)); +#23400 = VECTOR('',#23401,1.); +#23401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23402 = PLANE('',#23403); +#23403 = AXIS2_PLACEMENT_3D('',#23404,#23405,#23406); +#23404 = CARTESIAN_POINT('',(0.45,-28.54,8.35)); +#23405 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23406 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23407 = ADVANCED_FACE('',(#23408),#23426,.T.); +#23408 = FACE_BOUND('',#23409,.T.); +#23409 = EDGE_LOOP('',(#23410,#23411,#23412,#23420)); +#23410 = ORIENTED_EDGE('',*,*,#23389,.F.); +#23411 = ORIENTED_EDGE('',*,*,#20824,.T.); +#23412 = ORIENTED_EDGE('',*,*,#23413,.T.); +#23413 = EDGE_CURVE('',#20817,#23414,#23416,.T.); +#23414 = VERTEX_POINT('',#23415); +#23415 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#23416 = LINE('',#23417,#23418); +#23417 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#23418 = VECTOR('',#23419,1.); +#23419 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23420 = ORIENTED_EDGE('',*,*,#23421,.F.); +#23421 = EDGE_CURVE('',#23390,#23414,#23422,.T.); +#23422 = LINE('',#23423,#23424); +#23423 = CARTESIAN_POINT('',(0.6,-27.64,8.2)); +#23424 = VECTOR('',#23425,1.); +#23425 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23426 = PLANE('',#23427); +#23427 = AXIS2_PLACEMENT_3D('',#23428,#23429,#23430); +#23428 = CARTESIAN_POINT('',(0.6,-27.49,8.35)); +#23429 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23430 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23431 = ADVANCED_FACE('',(#23432),#23450,.T.); +#23432 = FACE_BOUND('',#23433,.T.); +#23433 = EDGE_LOOP('',(#23434,#23435,#23436,#23444)); +#23434 = ORIENTED_EDGE('',*,*,#23413,.F.); +#23435 = ORIENTED_EDGE('',*,*,#20816,.T.); +#23436 = ORIENTED_EDGE('',*,*,#23437,.T.); +#23437 = EDGE_CURVE('',#20809,#23438,#23440,.T.); +#23438 = VERTEX_POINT('',#23439); +#23439 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#23440 = LINE('',#23441,#23442); +#23441 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#23442 = VECTOR('',#23443,1.); +#23443 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23444 = ORIENTED_EDGE('',*,*,#23445,.F.); +#23445 = EDGE_CURVE('',#23414,#23438,#23446,.T.); +#23446 = LINE('',#23447,#23448); +#23447 = CARTESIAN_POINT('',(-0.3,-27.34,8.2)); +#23448 = VECTOR('',#23449,1.); +#23449 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23450 = PLANE('',#23451); +#23451 = AXIS2_PLACEMENT_3D('',#23452,#23453,#23454); +#23452 = CARTESIAN_POINT('',(-0.45,-27.34,8.35)); +#23453 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23454 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23455 = ADVANCED_FACE('',(#23456),#23467,.T.); +#23456 = FACE_BOUND('',#23457,.T.); +#23457 = EDGE_LOOP('',(#23458,#23459,#23460,#23461)); +#23458 = ORIENTED_EDGE('',*,*,#23437,.F.); +#23459 = ORIENTED_EDGE('',*,*,#20808,.T.); +#23460 = ORIENTED_EDGE('',*,*,#23380,.T.); +#23461 = ORIENTED_EDGE('',*,*,#23462,.F.); +#23462 = EDGE_CURVE('',#23438,#23381,#23463,.T.); +#23463 = LINE('',#23464,#23465); +#23464 = CARTESIAN_POINT('',(-0.6,-28.24,8.2)); +#23465 = VECTOR('',#23466,1.); +#23466 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23467 = PLANE('',#23468); +#23468 = AXIS2_PLACEMENT_3D('',#23469,#23470,#23471); +#23469 = CARTESIAN_POINT('',(-0.6,-28.39,8.35)); +#23470 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23471 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23472 = ADVANCED_FACE('',(#23473),#23498,.T.); +#23473 = FACE_BOUND('',#23474,.T.); +#23474 = EDGE_LOOP('',(#23475,#23483,#23484,#23492)); +#23475 = ORIENTED_EDGE('',*,*,#23476,.F.); +#23476 = EDGE_CURVE('',#20833,#23477,#23479,.T.); +#23477 = VERTEX_POINT('',#23478); +#23478 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#23479 = LINE('',#23480,#23481); +#23480 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#23481 = VECTOR('',#23482,1.); +#23482 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23483 = ORIENTED_EDGE('',*,*,#20832,.T.); +#23484 = ORIENTED_EDGE('',*,*,#23485,.T.); +#23485 = EDGE_CURVE('',#20835,#23486,#23488,.T.); +#23486 = VERTEX_POINT('',#23487); +#23487 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#23488 = LINE('',#23489,#23490); +#23489 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#23490 = VECTOR('',#23491,1.); +#23491 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23492 = ORIENTED_EDGE('',*,*,#23493,.F.); +#23493 = EDGE_CURVE('',#23477,#23486,#23494,.T.); +#23494 = LINE('',#23495,#23496); +#23495 = CARTESIAN_POINT('',(0.3,-26.,8.2)); +#23496 = VECTOR('',#23497,1.); +#23497 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23498 = PLANE('',#23499); +#23499 = AXIS2_PLACEMENT_3D('',#23500,#23501,#23502); +#23500 = CARTESIAN_POINT('',(0.45,-26.,8.35)); +#23501 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23502 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23503 = ADVANCED_FACE('',(#23504),#23522,.T.); +#23504 = FACE_BOUND('',#23505,.T.); +#23505 = EDGE_LOOP('',(#23506,#23507,#23508,#23516)); +#23506 = ORIENTED_EDGE('',*,*,#23485,.F.); +#23507 = ORIENTED_EDGE('',*,*,#20858,.T.); +#23508 = ORIENTED_EDGE('',*,*,#23509,.T.); +#23509 = EDGE_CURVE('',#20851,#23510,#23512,.T.); +#23510 = VERTEX_POINT('',#23511); +#23511 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#23512 = LINE('',#23513,#23514); +#23513 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#23514 = VECTOR('',#23515,1.); +#23515 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23516 = ORIENTED_EDGE('',*,*,#23517,.F.); +#23517 = EDGE_CURVE('',#23486,#23510,#23518,.T.); +#23518 = LINE('',#23519,#23520); +#23519 = CARTESIAN_POINT('',(0.6,-25.1,8.2)); +#23520 = VECTOR('',#23521,1.); +#23521 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23522 = PLANE('',#23523); +#23523 = AXIS2_PLACEMENT_3D('',#23524,#23525,#23526); +#23524 = CARTESIAN_POINT('',(0.6,-24.95,8.35)); +#23525 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23526 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23527 = ADVANCED_FACE('',(#23528),#23546,.T.); +#23528 = FACE_BOUND('',#23529,.T.); +#23529 = EDGE_LOOP('',(#23530,#23531,#23532,#23540)); +#23530 = ORIENTED_EDGE('',*,*,#23509,.F.); +#23531 = ORIENTED_EDGE('',*,*,#20850,.T.); +#23532 = ORIENTED_EDGE('',*,*,#23533,.T.); +#23533 = EDGE_CURVE('',#20843,#23534,#23536,.T.); +#23534 = VERTEX_POINT('',#23535); +#23535 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#23536 = LINE('',#23537,#23538); +#23537 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#23538 = VECTOR('',#23539,1.); +#23539 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23540 = ORIENTED_EDGE('',*,*,#23541,.F.); +#23541 = EDGE_CURVE('',#23510,#23534,#23542,.T.); +#23542 = LINE('',#23543,#23544); +#23543 = CARTESIAN_POINT('',(-0.3,-24.8,8.2)); +#23544 = VECTOR('',#23545,1.); +#23545 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23546 = PLANE('',#23547); +#23547 = AXIS2_PLACEMENT_3D('',#23548,#23549,#23550); +#23548 = CARTESIAN_POINT('',(-0.45,-24.8,8.35)); +#23549 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23550 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23551 = ADVANCED_FACE('',(#23552),#23563,.T.); +#23552 = FACE_BOUND('',#23553,.T.); +#23553 = EDGE_LOOP('',(#23554,#23555,#23556,#23557)); +#23554 = ORIENTED_EDGE('',*,*,#23533,.F.); +#23555 = ORIENTED_EDGE('',*,*,#20842,.T.); +#23556 = ORIENTED_EDGE('',*,*,#23476,.T.); +#23557 = ORIENTED_EDGE('',*,*,#23558,.F.); +#23558 = EDGE_CURVE('',#23534,#23477,#23559,.T.); +#23559 = LINE('',#23560,#23561); +#23560 = CARTESIAN_POINT('',(-0.6,-25.7,8.2)); +#23561 = VECTOR('',#23562,1.); +#23562 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23563 = PLANE('',#23564); +#23564 = AXIS2_PLACEMENT_3D('',#23565,#23566,#23567); +#23565 = CARTESIAN_POINT('',(-0.6,-25.85,8.35)); +#23566 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23567 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23568 = ADVANCED_FACE('',(#23569),#23594,.T.); +#23569 = FACE_BOUND('',#23570,.T.); +#23570 = EDGE_LOOP('',(#23571,#23579,#23580,#23588)); +#23571 = ORIENTED_EDGE('',*,*,#23572,.F.); +#23572 = EDGE_CURVE('',#20867,#23573,#23575,.T.); +#23573 = VERTEX_POINT('',#23574); +#23574 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#23575 = LINE('',#23576,#23577); +#23576 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#23577 = VECTOR('',#23578,1.); +#23578 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23579 = ORIENTED_EDGE('',*,*,#20866,.T.); +#23580 = ORIENTED_EDGE('',*,*,#23581,.T.); +#23581 = EDGE_CURVE('',#20869,#23582,#23584,.T.); +#23582 = VERTEX_POINT('',#23583); +#23583 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#23584 = LINE('',#23585,#23586); +#23585 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#23586 = VECTOR('',#23587,1.); +#23587 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23588 = ORIENTED_EDGE('',*,*,#23589,.F.); +#23589 = EDGE_CURVE('',#23573,#23582,#23590,.T.); +#23590 = LINE('',#23591,#23592); +#23591 = CARTESIAN_POINT('',(0.3,-23.46,8.2)); +#23592 = VECTOR('',#23593,1.); +#23593 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23594 = PLANE('',#23595); +#23595 = AXIS2_PLACEMENT_3D('',#23596,#23597,#23598); +#23596 = CARTESIAN_POINT('',(0.45,-23.46,8.35)); +#23597 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23598 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23599 = ADVANCED_FACE('',(#23600),#23618,.T.); +#23600 = FACE_BOUND('',#23601,.T.); +#23601 = EDGE_LOOP('',(#23602,#23603,#23604,#23612)); +#23602 = ORIENTED_EDGE('',*,*,#23581,.F.); +#23603 = ORIENTED_EDGE('',*,*,#20892,.T.); +#23604 = ORIENTED_EDGE('',*,*,#23605,.T.); +#23605 = EDGE_CURVE('',#20885,#23606,#23608,.T.); +#23606 = VERTEX_POINT('',#23607); +#23607 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#23608 = LINE('',#23609,#23610); +#23609 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#23610 = VECTOR('',#23611,1.); +#23611 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23612 = ORIENTED_EDGE('',*,*,#23613,.F.); +#23613 = EDGE_CURVE('',#23582,#23606,#23614,.T.); +#23614 = LINE('',#23615,#23616); +#23615 = CARTESIAN_POINT('',(0.6,-22.56,8.2)); +#23616 = VECTOR('',#23617,1.); +#23617 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23618 = PLANE('',#23619); +#23619 = AXIS2_PLACEMENT_3D('',#23620,#23621,#23622); +#23620 = CARTESIAN_POINT('',(0.6,-22.41,8.35)); +#23621 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23622 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23623 = ADVANCED_FACE('',(#23624),#23642,.T.); +#23624 = FACE_BOUND('',#23625,.T.); +#23625 = EDGE_LOOP('',(#23626,#23627,#23628,#23636)); +#23626 = ORIENTED_EDGE('',*,*,#23605,.F.); +#23627 = ORIENTED_EDGE('',*,*,#20884,.T.); +#23628 = ORIENTED_EDGE('',*,*,#23629,.T.); +#23629 = EDGE_CURVE('',#20877,#23630,#23632,.T.); +#23630 = VERTEX_POINT('',#23631); +#23631 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#23632 = LINE('',#23633,#23634); +#23633 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#23634 = VECTOR('',#23635,1.); +#23635 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23636 = ORIENTED_EDGE('',*,*,#23637,.F.); +#23637 = EDGE_CURVE('',#23606,#23630,#23638,.T.); +#23638 = LINE('',#23639,#23640); +#23639 = CARTESIAN_POINT('',(-0.3,-22.26,8.2)); +#23640 = VECTOR('',#23641,1.); +#23641 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23642 = PLANE('',#23643); +#23643 = AXIS2_PLACEMENT_3D('',#23644,#23645,#23646); +#23644 = CARTESIAN_POINT('',(-0.45,-22.26,8.35)); +#23645 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23646 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23647 = ADVANCED_FACE('',(#23648),#23659,.T.); +#23648 = FACE_BOUND('',#23649,.T.); +#23649 = EDGE_LOOP('',(#23650,#23651,#23652,#23653)); +#23650 = ORIENTED_EDGE('',*,*,#23629,.F.); +#23651 = ORIENTED_EDGE('',*,*,#20876,.T.); +#23652 = ORIENTED_EDGE('',*,*,#23572,.T.); +#23653 = ORIENTED_EDGE('',*,*,#23654,.F.); +#23654 = EDGE_CURVE('',#23630,#23573,#23655,.T.); +#23655 = LINE('',#23656,#23657); +#23656 = CARTESIAN_POINT('',(-0.6,-23.16,8.2)); +#23657 = VECTOR('',#23658,1.); +#23658 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23659 = PLANE('',#23660); +#23660 = AXIS2_PLACEMENT_3D('',#23661,#23662,#23663); +#23661 = CARTESIAN_POINT('',(-0.6,-23.31,8.35)); +#23662 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23663 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23664 = ADVANCED_FACE('',(#23665),#23690,.T.); +#23665 = FACE_BOUND('',#23666,.T.); +#23666 = EDGE_LOOP('',(#23667,#23675,#23676,#23684)); +#23667 = ORIENTED_EDGE('',*,*,#23668,.F.); +#23668 = EDGE_CURVE('',#20901,#23669,#23671,.T.); +#23669 = VERTEX_POINT('',#23670); +#23670 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#23671 = LINE('',#23672,#23673); +#23672 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#23673 = VECTOR('',#23674,1.); +#23674 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23675 = ORIENTED_EDGE('',*,*,#20900,.T.); +#23676 = ORIENTED_EDGE('',*,*,#23677,.T.); +#23677 = EDGE_CURVE('',#20903,#23678,#23680,.T.); +#23678 = VERTEX_POINT('',#23679); +#23679 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#23680 = LINE('',#23681,#23682); +#23681 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#23682 = VECTOR('',#23683,1.); +#23683 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23684 = ORIENTED_EDGE('',*,*,#23685,.F.); +#23685 = EDGE_CURVE('',#23669,#23678,#23686,.T.); +#23686 = LINE('',#23687,#23688); +#23687 = CARTESIAN_POINT('',(0.3,-20.92,8.2)); +#23688 = VECTOR('',#23689,1.); +#23689 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23690 = PLANE('',#23691); +#23691 = AXIS2_PLACEMENT_3D('',#23692,#23693,#23694); +#23692 = CARTESIAN_POINT('',(0.45,-20.92,8.35)); +#23693 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23694 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23695 = ADVANCED_FACE('',(#23696),#23714,.T.); +#23696 = FACE_BOUND('',#23697,.T.); +#23697 = EDGE_LOOP('',(#23698,#23699,#23700,#23708)); +#23698 = ORIENTED_EDGE('',*,*,#23677,.F.); +#23699 = ORIENTED_EDGE('',*,*,#20926,.T.); +#23700 = ORIENTED_EDGE('',*,*,#23701,.T.); +#23701 = EDGE_CURVE('',#20919,#23702,#23704,.T.); +#23702 = VERTEX_POINT('',#23703); +#23703 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#23704 = LINE('',#23705,#23706); +#23705 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#23706 = VECTOR('',#23707,1.); +#23707 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23708 = ORIENTED_EDGE('',*,*,#23709,.F.); +#23709 = EDGE_CURVE('',#23678,#23702,#23710,.T.); +#23710 = LINE('',#23711,#23712); +#23711 = CARTESIAN_POINT('',(0.6,-20.02,8.2)); +#23712 = VECTOR('',#23713,1.); +#23713 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23714 = PLANE('',#23715); +#23715 = AXIS2_PLACEMENT_3D('',#23716,#23717,#23718); +#23716 = CARTESIAN_POINT('',(0.6,-19.87,8.35)); +#23717 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23718 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23719 = ADVANCED_FACE('',(#23720),#23738,.T.); +#23720 = FACE_BOUND('',#23721,.T.); +#23721 = EDGE_LOOP('',(#23722,#23723,#23724,#23732)); +#23722 = ORIENTED_EDGE('',*,*,#23701,.F.); +#23723 = ORIENTED_EDGE('',*,*,#20918,.T.); +#23724 = ORIENTED_EDGE('',*,*,#23725,.T.); +#23725 = EDGE_CURVE('',#20911,#23726,#23728,.T.); +#23726 = VERTEX_POINT('',#23727); +#23727 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#23728 = LINE('',#23729,#23730); +#23729 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#23730 = VECTOR('',#23731,1.); +#23731 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23732 = ORIENTED_EDGE('',*,*,#23733,.F.); +#23733 = EDGE_CURVE('',#23702,#23726,#23734,.T.); +#23734 = LINE('',#23735,#23736); +#23735 = CARTESIAN_POINT('',(-0.3,-19.72,8.2)); +#23736 = VECTOR('',#23737,1.); +#23737 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23738 = PLANE('',#23739); +#23739 = AXIS2_PLACEMENT_3D('',#23740,#23741,#23742); +#23740 = CARTESIAN_POINT('',(-0.45,-19.72,8.35)); +#23741 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23742 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23743 = ADVANCED_FACE('',(#23744),#23755,.T.); +#23744 = FACE_BOUND('',#23745,.T.); +#23745 = EDGE_LOOP('',(#23746,#23747,#23748,#23749)); +#23746 = ORIENTED_EDGE('',*,*,#23725,.F.); +#23747 = ORIENTED_EDGE('',*,*,#20910,.T.); +#23748 = ORIENTED_EDGE('',*,*,#23668,.T.); +#23749 = ORIENTED_EDGE('',*,*,#23750,.F.); +#23750 = EDGE_CURVE('',#23726,#23669,#23751,.T.); +#23751 = LINE('',#23752,#23753); +#23752 = CARTESIAN_POINT('',(-0.6,-20.62,8.2)); +#23753 = VECTOR('',#23754,1.); +#23754 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23755 = PLANE('',#23756); +#23756 = AXIS2_PLACEMENT_3D('',#23757,#23758,#23759); +#23757 = CARTESIAN_POINT('',(-0.6,-20.77,8.35)); +#23758 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23759 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23760 = ADVANCED_FACE('',(#23761),#23786,.T.); +#23761 = FACE_BOUND('',#23762,.T.); +#23762 = EDGE_LOOP('',(#23763,#23771,#23772,#23780)); +#23763 = ORIENTED_EDGE('',*,*,#23764,.F.); +#23764 = EDGE_CURVE('',#20935,#23765,#23767,.T.); +#23765 = VERTEX_POINT('',#23766); +#23766 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#23767 = LINE('',#23768,#23769); +#23768 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#23769 = VECTOR('',#23770,1.); +#23770 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23771 = ORIENTED_EDGE('',*,*,#20934,.T.); +#23772 = ORIENTED_EDGE('',*,*,#23773,.T.); +#23773 = EDGE_CURVE('',#20937,#23774,#23776,.T.); +#23774 = VERTEX_POINT('',#23775); +#23775 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#23776 = LINE('',#23777,#23778); +#23777 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#23778 = VECTOR('',#23779,1.); +#23779 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23780 = ORIENTED_EDGE('',*,*,#23781,.F.); +#23781 = EDGE_CURVE('',#23765,#23774,#23782,.T.); +#23782 = LINE('',#23783,#23784); +#23783 = CARTESIAN_POINT('',(0.3,-18.38,8.2)); +#23784 = VECTOR('',#23785,1.); +#23785 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23786 = PLANE('',#23787); +#23787 = AXIS2_PLACEMENT_3D('',#23788,#23789,#23790); +#23788 = CARTESIAN_POINT('',(0.45,-18.38,8.35)); +#23789 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23790 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23791 = ADVANCED_FACE('',(#23792),#23810,.T.); +#23792 = FACE_BOUND('',#23793,.T.); +#23793 = EDGE_LOOP('',(#23794,#23795,#23796,#23804)); +#23794 = ORIENTED_EDGE('',*,*,#23773,.F.); +#23795 = ORIENTED_EDGE('',*,*,#20960,.T.); +#23796 = ORIENTED_EDGE('',*,*,#23797,.T.); +#23797 = EDGE_CURVE('',#20953,#23798,#23800,.T.); +#23798 = VERTEX_POINT('',#23799); +#23799 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#23800 = LINE('',#23801,#23802); +#23801 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#23802 = VECTOR('',#23803,1.); +#23803 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23804 = ORIENTED_EDGE('',*,*,#23805,.F.); +#23805 = EDGE_CURVE('',#23774,#23798,#23806,.T.); +#23806 = LINE('',#23807,#23808); +#23807 = CARTESIAN_POINT('',(0.6,-17.48,8.2)); +#23808 = VECTOR('',#23809,1.); +#23809 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23810 = PLANE('',#23811); +#23811 = AXIS2_PLACEMENT_3D('',#23812,#23813,#23814); +#23812 = CARTESIAN_POINT('',(0.6,-17.33,8.35)); +#23813 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23814 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23815 = ADVANCED_FACE('',(#23816),#23834,.T.); +#23816 = FACE_BOUND('',#23817,.T.); +#23817 = EDGE_LOOP('',(#23818,#23819,#23820,#23828)); +#23818 = ORIENTED_EDGE('',*,*,#23797,.F.); +#23819 = ORIENTED_EDGE('',*,*,#20952,.T.); +#23820 = ORIENTED_EDGE('',*,*,#23821,.T.); +#23821 = EDGE_CURVE('',#20945,#23822,#23824,.T.); +#23822 = VERTEX_POINT('',#23823); +#23823 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#23824 = LINE('',#23825,#23826); +#23825 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#23826 = VECTOR('',#23827,1.); +#23827 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23828 = ORIENTED_EDGE('',*,*,#23829,.F.); +#23829 = EDGE_CURVE('',#23798,#23822,#23830,.T.); +#23830 = LINE('',#23831,#23832); +#23831 = CARTESIAN_POINT('',(-0.3,-17.18,8.2)); +#23832 = VECTOR('',#23833,1.); +#23833 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23834 = PLANE('',#23835); +#23835 = AXIS2_PLACEMENT_3D('',#23836,#23837,#23838); +#23836 = CARTESIAN_POINT('',(-0.45,-17.18,8.35)); +#23837 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23838 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23839 = ADVANCED_FACE('',(#23840),#23851,.T.); +#23840 = FACE_BOUND('',#23841,.T.); +#23841 = EDGE_LOOP('',(#23842,#23843,#23844,#23845)); +#23842 = ORIENTED_EDGE('',*,*,#23821,.F.); +#23843 = ORIENTED_EDGE('',*,*,#20944,.T.); +#23844 = ORIENTED_EDGE('',*,*,#23764,.T.); +#23845 = ORIENTED_EDGE('',*,*,#23846,.F.); +#23846 = EDGE_CURVE('',#23822,#23765,#23847,.T.); +#23847 = LINE('',#23848,#23849); +#23848 = CARTESIAN_POINT('',(-0.6,-18.08,8.2)); +#23849 = VECTOR('',#23850,1.); +#23850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23851 = PLANE('',#23852); +#23852 = AXIS2_PLACEMENT_3D('',#23853,#23854,#23855); +#23853 = CARTESIAN_POINT('',(-0.6,-18.23,8.35)); +#23854 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23855 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23856 = ADVANCED_FACE('',(#23857),#23882,.T.); +#23857 = FACE_BOUND('',#23858,.T.); +#23858 = EDGE_LOOP('',(#23859,#23867,#23868,#23876)); +#23859 = ORIENTED_EDGE('',*,*,#23860,.F.); +#23860 = EDGE_CURVE('',#20969,#23861,#23863,.T.); +#23861 = VERTEX_POINT('',#23862); +#23862 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#23863 = LINE('',#23864,#23865); +#23864 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#23865 = VECTOR('',#23866,1.); +#23866 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23867 = ORIENTED_EDGE('',*,*,#20968,.T.); +#23868 = ORIENTED_EDGE('',*,*,#23869,.T.); +#23869 = EDGE_CURVE('',#20971,#23870,#23872,.T.); +#23870 = VERTEX_POINT('',#23871); +#23871 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#23872 = LINE('',#23873,#23874); +#23873 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#23874 = VECTOR('',#23875,1.); +#23875 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23876 = ORIENTED_EDGE('',*,*,#23877,.F.); +#23877 = EDGE_CURVE('',#23861,#23870,#23878,.T.); +#23878 = LINE('',#23879,#23880); +#23879 = CARTESIAN_POINT('',(0.3,-15.84,8.2)); +#23880 = VECTOR('',#23881,1.); +#23881 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23882 = PLANE('',#23883); +#23883 = AXIS2_PLACEMENT_3D('',#23884,#23885,#23886); +#23884 = CARTESIAN_POINT('',(0.45,-15.84,8.35)); +#23885 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23886 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23887 = ADVANCED_FACE('',(#23888),#23906,.T.); +#23888 = FACE_BOUND('',#23889,.T.); +#23889 = EDGE_LOOP('',(#23890,#23891,#23892,#23900)); +#23890 = ORIENTED_EDGE('',*,*,#23869,.F.); +#23891 = ORIENTED_EDGE('',*,*,#20994,.T.); +#23892 = ORIENTED_EDGE('',*,*,#23893,.T.); +#23893 = EDGE_CURVE('',#20987,#23894,#23896,.T.); +#23894 = VERTEX_POINT('',#23895); +#23895 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#23896 = LINE('',#23897,#23898); +#23897 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#23898 = VECTOR('',#23899,1.); +#23899 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23900 = ORIENTED_EDGE('',*,*,#23901,.F.); +#23901 = EDGE_CURVE('',#23870,#23894,#23902,.T.); +#23902 = LINE('',#23903,#23904); +#23903 = CARTESIAN_POINT('',(0.6,-14.94,8.2)); +#23904 = VECTOR('',#23905,1.); +#23905 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23906 = PLANE('',#23907); +#23907 = AXIS2_PLACEMENT_3D('',#23908,#23909,#23910); +#23908 = CARTESIAN_POINT('',(0.6,-14.79,8.35)); +#23909 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23910 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23911 = ADVANCED_FACE('',(#23912),#23930,.T.); +#23912 = FACE_BOUND('',#23913,.T.); +#23913 = EDGE_LOOP('',(#23914,#23915,#23916,#23924)); +#23914 = ORIENTED_EDGE('',*,*,#23893,.F.); +#23915 = ORIENTED_EDGE('',*,*,#20986,.T.); +#23916 = ORIENTED_EDGE('',*,*,#23917,.T.); +#23917 = EDGE_CURVE('',#20979,#23918,#23920,.T.); +#23918 = VERTEX_POINT('',#23919); +#23919 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#23920 = LINE('',#23921,#23922); +#23921 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#23922 = VECTOR('',#23923,1.); +#23923 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23924 = ORIENTED_EDGE('',*,*,#23925,.F.); +#23925 = EDGE_CURVE('',#23894,#23918,#23926,.T.); +#23926 = LINE('',#23927,#23928); +#23927 = CARTESIAN_POINT('',(-0.3,-14.64,8.2)); +#23928 = VECTOR('',#23929,1.); +#23929 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23930 = PLANE('',#23931); +#23931 = AXIS2_PLACEMENT_3D('',#23932,#23933,#23934); +#23932 = CARTESIAN_POINT('',(-0.45,-14.64,8.35)); +#23933 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23934 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23935 = ADVANCED_FACE('',(#23936),#23947,.T.); +#23936 = FACE_BOUND('',#23937,.T.); +#23937 = EDGE_LOOP('',(#23938,#23939,#23940,#23941)); +#23938 = ORIENTED_EDGE('',*,*,#23917,.F.); +#23939 = ORIENTED_EDGE('',*,*,#20978,.T.); +#23940 = ORIENTED_EDGE('',*,*,#23860,.T.); +#23941 = ORIENTED_EDGE('',*,*,#23942,.F.); +#23942 = EDGE_CURVE('',#23918,#23861,#23943,.T.); +#23943 = LINE('',#23944,#23945); +#23944 = CARTESIAN_POINT('',(-0.6,-15.54,8.2)); +#23945 = VECTOR('',#23946,1.); +#23946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23947 = PLANE('',#23948); +#23948 = AXIS2_PLACEMENT_3D('',#23949,#23950,#23951); +#23949 = CARTESIAN_POINT('',(-0.6,-15.69,8.35)); +#23950 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23951 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23952 = ADVANCED_FACE('',(#23953),#23978,.T.); +#23953 = FACE_BOUND('',#23954,.T.); +#23954 = EDGE_LOOP('',(#23955,#23963,#23964,#23972)); +#23955 = ORIENTED_EDGE('',*,*,#23956,.F.); +#23956 = EDGE_CURVE('',#21003,#23957,#23959,.T.); +#23957 = VERTEX_POINT('',#23958); +#23958 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#23959 = LINE('',#23960,#23961); +#23960 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#23961 = VECTOR('',#23962,1.); +#23962 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23963 = ORIENTED_EDGE('',*,*,#21002,.T.); +#23964 = ORIENTED_EDGE('',*,*,#23965,.T.); +#23965 = EDGE_CURVE('',#21005,#23966,#23968,.T.); +#23966 = VERTEX_POINT('',#23967); +#23967 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#23968 = LINE('',#23969,#23970); +#23969 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#23970 = VECTOR('',#23971,1.); +#23971 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23972 = ORIENTED_EDGE('',*,*,#23973,.F.); +#23973 = EDGE_CURVE('',#23957,#23966,#23974,.T.); +#23974 = LINE('',#23975,#23976); +#23975 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#23976 = VECTOR('',#23977,1.); +#23977 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23978 = PLANE('',#23979); +#23979 = AXIS2_PLACEMENT_3D('',#23980,#23981,#23982); +#23980 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#23981 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23982 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23983 = ADVANCED_FACE('',(#23984),#24002,.T.); +#23984 = FACE_BOUND('',#23985,.T.); +#23985 = EDGE_LOOP('',(#23986,#23987,#23988,#23996)); +#23986 = ORIENTED_EDGE('',*,*,#23965,.F.); +#23987 = ORIENTED_EDGE('',*,*,#21028,.T.); +#23988 = ORIENTED_EDGE('',*,*,#23989,.T.); +#23989 = EDGE_CURVE('',#21021,#23990,#23992,.T.); +#23990 = VERTEX_POINT('',#23991); +#23991 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#23992 = LINE('',#23993,#23994); +#23993 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#23994 = VECTOR('',#23995,1.); +#23995 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23996 = ORIENTED_EDGE('',*,*,#23997,.F.); +#23997 = EDGE_CURVE('',#23966,#23990,#23998,.T.); +#23998 = LINE('',#23999,#24000); +#23999 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#24000 = VECTOR('',#24001,1.); +#24001 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24002 = PLANE('',#24003); +#24003 = AXIS2_PLACEMENT_3D('',#24004,#24005,#24006); +#24004 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#24005 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24006 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24007 = ADVANCED_FACE('',(#24008),#24026,.T.); +#24008 = FACE_BOUND('',#24009,.T.); +#24009 = EDGE_LOOP('',(#24010,#24011,#24012,#24020)); +#24010 = ORIENTED_EDGE('',*,*,#23989,.F.); +#24011 = ORIENTED_EDGE('',*,*,#21020,.T.); +#24012 = ORIENTED_EDGE('',*,*,#24013,.T.); +#24013 = EDGE_CURVE('',#21013,#24014,#24016,.T.); +#24014 = VERTEX_POINT('',#24015); +#24015 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#24016 = LINE('',#24017,#24018); +#24017 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#24018 = VECTOR('',#24019,1.); +#24019 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24020 = ORIENTED_EDGE('',*,*,#24021,.F.); +#24021 = EDGE_CURVE('',#23990,#24014,#24022,.T.); +#24022 = LINE('',#24023,#24024); +#24023 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#24024 = VECTOR('',#24025,1.); +#24025 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24026 = PLANE('',#24027); +#24027 = AXIS2_PLACEMENT_3D('',#24028,#24029,#24030); +#24028 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#24029 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24030 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24031 = ADVANCED_FACE('',(#24032),#24043,.T.); +#24032 = FACE_BOUND('',#24033,.T.); +#24033 = EDGE_LOOP('',(#24034,#24035,#24036,#24037)); +#24034 = ORIENTED_EDGE('',*,*,#24013,.F.); +#24035 = ORIENTED_EDGE('',*,*,#21012,.T.); +#24036 = ORIENTED_EDGE('',*,*,#23956,.T.); +#24037 = ORIENTED_EDGE('',*,*,#24038,.F.); +#24038 = EDGE_CURVE('',#24014,#23957,#24039,.T.); +#24039 = LINE('',#24040,#24041); +#24040 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#24041 = VECTOR('',#24042,1.); +#24042 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24043 = PLANE('',#24044); +#24044 = AXIS2_PLACEMENT_3D('',#24045,#24046,#24047); +#24045 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#24046 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24047 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24048 = ADVANCED_FACE('',(#24049),#24074,.T.); +#24049 = FACE_BOUND('',#24050,.T.); +#24050 = EDGE_LOOP('',(#24051,#24059,#24060,#24068)); +#24051 = ORIENTED_EDGE('',*,*,#24052,.F.); +#24052 = EDGE_CURVE('',#21037,#24053,#24055,.T.); +#24053 = VERTEX_POINT('',#24054); +#24054 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#24055 = LINE('',#24056,#24057); +#24056 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#24057 = VECTOR('',#24058,1.); +#24058 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24059 = ORIENTED_EDGE('',*,*,#21036,.T.); +#24060 = ORIENTED_EDGE('',*,*,#24061,.T.); +#24061 = EDGE_CURVE('',#21039,#24062,#24064,.T.); +#24062 = VERTEX_POINT('',#24063); +#24063 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#24064 = LINE('',#24065,#24066); +#24065 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#24066 = VECTOR('',#24067,1.); +#24067 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24068 = ORIENTED_EDGE('',*,*,#24069,.F.); +#24069 = EDGE_CURVE('',#24053,#24062,#24070,.T.); +#24070 = LINE('',#24071,#24072); +#24071 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#24072 = VECTOR('',#24073,1.); +#24073 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24074 = PLANE('',#24075); +#24075 = AXIS2_PLACEMENT_3D('',#24076,#24077,#24078); +#24076 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#24077 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24078 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24079 = ADVANCED_FACE('',(#24080),#24098,.T.); +#24080 = FACE_BOUND('',#24081,.T.); +#24081 = EDGE_LOOP('',(#24082,#24083,#24084,#24092)); +#24082 = ORIENTED_EDGE('',*,*,#24061,.F.); +#24083 = ORIENTED_EDGE('',*,*,#21062,.T.); +#24084 = ORIENTED_EDGE('',*,*,#24085,.T.); +#24085 = EDGE_CURVE('',#21055,#24086,#24088,.T.); +#24086 = VERTEX_POINT('',#24087); +#24087 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#24088 = LINE('',#24089,#24090); +#24089 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#24090 = VECTOR('',#24091,1.); +#24091 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24092 = ORIENTED_EDGE('',*,*,#24093,.F.); +#24093 = EDGE_CURVE('',#24062,#24086,#24094,.T.); +#24094 = LINE('',#24095,#24096); +#24095 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#24096 = VECTOR('',#24097,1.); +#24097 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24098 = PLANE('',#24099); +#24099 = AXIS2_PLACEMENT_3D('',#24100,#24101,#24102); +#24100 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#24101 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24102 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24103 = ADVANCED_FACE('',(#24104),#24122,.T.); +#24104 = FACE_BOUND('',#24105,.T.); +#24105 = EDGE_LOOP('',(#24106,#24107,#24108,#24116)); +#24106 = ORIENTED_EDGE('',*,*,#24085,.F.); +#24107 = ORIENTED_EDGE('',*,*,#21054,.T.); +#24108 = ORIENTED_EDGE('',*,*,#24109,.T.); +#24109 = EDGE_CURVE('',#21047,#24110,#24112,.T.); +#24110 = VERTEX_POINT('',#24111); +#24111 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#24112 = LINE('',#24113,#24114); +#24113 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#24114 = VECTOR('',#24115,1.); +#24115 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24116 = ORIENTED_EDGE('',*,*,#24117,.F.); +#24117 = EDGE_CURVE('',#24086,#24110,#24118,.T.); +#24118 = LINE('',#24119,#24120); +#24119 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#24120 = VECTOR('',#24121,1.); +#24121 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24122 = PLANE('',#24123); +#24123 = AXIS2_PLACEMENT_3D('',#24124,#24125,#24126); +#24124 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#24125 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24126 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24127 = ADVANCED_FACE('',(#24128),#24139,.T.); +#24128 = FACE_BOUND('',#24129,.T.); +#24129 = EDGE_LOOP('',(#24130,#24131,#24132,#24133)); +#24130 = ORIENTED_EDGE('',*,*,#24109,.F.); +#24131 = ORIENTED_EDGE('',*,*,#21046,.T.); +#24132 = ORIENTED_EDGE('',*,*,#24052,.T.); +#24133 = ORIENTED_EDGE('',*,*,#24134,.F.); +#24134 = EDGE_CURVE('',#24110,#24053,#24135,.T.); +#24135 = LINE('',#24136,#24137); +#24136 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#24137 = VECTOR('',#24138,1.); +#24138 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24139 = PLANE('',#24140); +#24140 = AXIS2_PLACEMENT_3D('',#24141,#24142,#24143); +#24141 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#24142 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24143 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24144 = ADVANCED_FACE('',(#24145),#24170,.T.); +#24145 = FACE_BOUND('',#24146,.T.); +#24146 = EDGE_LOOP('',(#24147,#24155,#24156,#24164)); +#24147 = ORIENTED_EDGE('',*,*,#24148,.F.); +#24148 = EDGE_CURVE('',#21071,#24149,#24151,.T.); +#24149 = VERTEX_POINT('',#24150); +#24150 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#24151 = LINE('',#24152,#24153); +#24152 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#24153 = VECTOR('',#24154,1.); +#24154 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24155 = ORIENTED_EDGE('',*,*,#21070,.T.); +#24156 = ORIENTED_EDGE('',*,*,#24157,.T.); +#24157 = EDGE_CURVE('',#21073,#24158,#24160,.T.); +#24158 = VERTEX_POINT('',#24159); +#24159 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#24160 = LINE('',#24161,#24162); +#24161 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#24162 = VECTOR('',#24163,1.); +#24163 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24164 = ORIENTED_EDGE('',*,*,#24165,.F.); +#24165 = EDGE_CURVE('',#24149,#24158,#24166,.T.); +#24166 = LINE('',#24167,#24168); +#24167 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#24168 = VECTOR('',#24169,1.); +#24169 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24170 = PLANE('',#24171); +#24171 = AXIS2_PLACEMENT_3D('',#24172,#24173,#24174); +#24172 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#24173 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24174 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24175 = ADVANCED_FACE('',(#24176),#24194,.T.); +#24176 = FACE_BOUND('',#24177,.T.); +#24177 = EDGE_LOOP('',(#24178,#24179,#24180,#24188)); +#24178 = ORIENTED_EDGE('',*,*,#24157,.F.); +#24179 = ORIENTED_EDGE('',*,*,#21096,.T.); +#24180 = ORIENTED_EDGE('',*,*,#24181,.T.); +#24181 = EDGE_CURVE('',#21089,#24182,#24184,.T.); +#24182 = VERTEX_POINT('',#24183); +#24183 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#24184 = LINE('',#24185,#24186); +#24185 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#24186 = VECTOR('',#24187,1.); +#24187 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24188 = ORIENTED_EDGE('',*,*,#24189,.F.); +#24189 = EDGE_CURVE('',#24158,#24182,#24190,.T.); +#24190 = LINE('',#24191,#24192); +#24191 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#24192 = VECTOR('',#24193,1.); +#24193 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24194 = PLANE('',#24195); +#24195 = AXIS2_PLACEMENT_3D('',#24196,#24197,#24198); +#24196 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#24197 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24198 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24199 = ADVANCED_FACE('',(#24200),#24218,.T.); +#24200 = FACE_BOUND('',#24201,.T.); +#24201 = EDGE_LOOP('',(#24202,#24203,#24204,#24212)); +#24202 = ORIENTED_EDGE('',*,*,#24181,.F.); +#24203 = ORIENTED_EDGE('',*,*,#21088,.T.); +#24204 = ORIENTED_EDGE('',*,*,#24205,.T.); +#24205 = EDGE_CURVE('',#21081,#24206,#24208,.T.); +#24206 = VERTEX_POINT('',#24207); +#24207 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#24208 = LINE('',#24209,#24210); +#24209 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#24210 = VECTOR('',#24211,1.); +#24211 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24212 = ORIENTED_EDGE('',*,*,#24213,.F.); +#24213 = EDGE_CURVE('',#24182,#24206,#24214,.T.); +#24214 = LINE('',#24215,#24216); +#24215 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#24216 = VECTOR('',#24217,1.); +#24217 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24218 = PLANE('',#24219); +#24219 = AXIS2_PLACEMENT_3D('',#24220,#24221,#24222); +#24220 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#24221 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24222 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24223 = ADVANCED_FACE('',(#24224),#24235,.T.); +#24224 = FACE_BOUND('',#24225,.T.); +#24225 = EDGE_LOOP('',(#24226,#24227,#24228,#24229)); +#24226 = ORIENTED_EDGE('',*,*,#24205,.F.); +#24227 = ORIENTED_EDGE('',*,*,#21080,.T.); +#24228 = ORIENTED_EDGE('',*,*,#24148,.T.); +#24229 = ORIENTED_EDGE('',*,*,#24230,.F.); +#24230 = EDGE_CURVE('',#24206,#24149,#24231,.T.); +#24231 = LINE('',#24232,#24233); +#24232 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#24233 = VECTOR('',#24234,1.); +#24234 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24235 = PLANE('',#24236); +#24236 = AXIS2_PLACEMENT_3D('',#24237,#24238,#24239); +#24237 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#24238 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24239 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24240 = ADVANCED_FACE('',(#24241),#24266,.T.); +#24241 = FACE_BOUND('',#24242,.T.); +#24242 = EDGE_LOOP('',(#24243,#24251,#24252,#24260)); +#24243 = ORIENTED_EDGE('',*,*,#24244,.F.); +#24244 = EDGE_CURVE('',#21105,#24245,#24247,.T.); +#24245 = VERTEX_POINT('',#24246); +#24246 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#24247 = LINE('',#24248,#24249); +#24248 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#24249 = VECTOR('',#24250,1.); +#24250 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24251 = ORIENTED_EDGE('',*,*,#21104,.T.); +#24252 = ORIENTED_EDGE('',*,*,#24253,.T.); +#24253 = EDGE_CURVE('',#21107,#24254,#24256,.T.); +#24254 = VERTEX_POINT('',#24255); +#24255 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#24256 = LINE('',#24257,#24258); +#24257 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#24258 = VECTOR('',#24259,1.); +#24259 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24260 = ORIENTED_EDGE('',*,*,#24261,.F.); +#24261 = EDGE_CURVE('',#24245,#24254,#24262,.T.); +#24262 = LINE('',#24263,#24264); +#24263 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#24264 = VECTOR('',#24265,1.); +#24265 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24266 = PLANE('',#24267); +#24267 = AXIS2_PLACEMENT_3D('',#24268,#24269,#24270); +#24268 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#24269 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24270 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24271 = ADVANCED_FACE('',(#24272),#24290,.T.); +#24272 = FACE_BOUND('',#24273,.T.); +#24273 = EDGE_LOOP('',(#24274,#24275,#24276,#24284)); +#24274 = ORIENTED_EDGE('',*,*,#24253,.F.); +#24275 = ORIENTED_EDGE('',*,*,#21130,.T.); +#24276 = ORIENTED_EDGE('',*,*,#24277,.T.); +#24277 = EDGE_CURVE('',#21123,#24278,#24280,.T.); +#24278 = VERTEX_POINT('',#24279); +#24279 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#24280 = LINE('',#24281,#24282); +#24281 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#24282 = VECTOR('',#24283,1.); +#24283 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24284 = ORIENTED_EDGE('',*,*,#24285,.F.); +#24285 = EDGE_CURVE('',#24254,#24278,#24286,.T.); +#24286 = LINE('',#24287,#24288); +#24287 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#24288 = VECTOR('',#24289,1.); +#24289 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24290 = PLANE('',#24291); +#24291 = AXIS2_PLACEMENT_3D('',#24292,#24293,#24294); +#24292 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#24293 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24294 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24295 = ADVANCED_FACE('',(#24296),#24314,.T.); +#24296 = FACE_BOUND('',#24297,.T.); +#24297 = EDGE_LOOP('',(#24298,#24299,#24300,#24308)); +#24298 = ORIENTED_EDGE('',*,*,#24277,.F.); +#24299 = ORIENTED_EDGE('',*,*,#21122,.T.); +#24300 = ORIENTED_EDGE('',*,*,#24301,.T.); +#24301 = EDGE_CURVE('',#21115,#24302,#24304,.T.); +#24302 = VERTEX_POINT('',#24303); +#24303 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#24304 = LINE('',#24305,#24306); +#24305 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#24306 = VECTOR('',#24307,1.); +#24307 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24308 = ORIENTED_EDGE('',*,*,#24309,.F.); +#24309 = EDGE_CURVE('',#24278,#24302,#24310,.T.); +#24310 = LINE('',#24311,#24312); +#24311 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#24312 = VECTOR('',#24313,1.); +#24313 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24314 = PLANE('',#24315); +#24315 = AXIS2_PLACEMENT_3D('',#24316,#24317,#24318); +#24316 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#24317 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24318 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24319 = ADVANCED_FACE('',(#24320),#24331,.T.); +#24320 = FACE_BOUND('',#24321,.T.); +#24321 = EDGE_LOOP('',(#24322,#24323,#24324,#24325)); +#24322 = ORIENTED_EDGE('',*,*,#24301,.F.); +#24323 = ORIENTED_EDGE('',*,*,#21114,.T.); +#24324 = ORIENTED_EDGE('',*,*,#24244,.T.); +#24325 = ORIENTED_EDGE('',*,*,#24326,.F.); +#24326 = EDGE_CURVE('',#24302,#24245,#24327,.T.); +#24327 = LINE('',#24328,#24329); +#24328 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#24329 = VECTOR('',#24330,1.); +#24330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24331 = PLANE('',#24332); +#24332 = AXIS2_PLACEMENT_3D('',#24333,#24334,#24335); +#24333 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#24334 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24335 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24336 = ADVANCED_FACE('',(#24337),#24362,.T.); +#24337 = FACE_BOUND('',#24338,.T.); +#24338 = EDGE_LOOP('',(#24339,#24347,#24348,#24356)); +#24339 = ORIENTED_EDGE('',*,*,#24340,.F.); +#24340 = EDGE_CURVE('',#21139,#24341,#24343,.T.); +#24341 = VERTEX_POINT('',#24342); +#24342 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#24343 = LINE('',#24344,#24345); +#24344 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#24345 = VECTOR('',#24346,1.); +#24346 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24347 = ORIENTED_EDGE('',*,*,#21138,.T.); +#24348 = ORIENTED_EDGE('',*,*,#24349,.T.); +#24349 = EDGE_CURVE('',#21141,#24350,#24352,.T.); +#24350 = VERTEX_POINT('',#24351); +#24351 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#24352 = LINE('',#24353,#24354); +#24353 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#24354 = VECTOR('',#24355,1.); +#24355 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24356 = ORIENTED_EDGE('',*,*,#24357,.F.); +#24357 = EDGE_CURVE('',#24341,#24350,#24358,.T.); +#24358 = LINE('',#24359,#24360); +#24359 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#24360 = VECTOR('',#24361,1.); +#24361 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24362 = PLANE('',#24363); +#24363 = AXIS2_PLACEMENT_3D('',#24364,#24365,#24366); +#24364 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#24365 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24366 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24367 = ADVANCED_FACE('',(#24368),#24386,.T.); +#24368 = FACE_BOUND('',#24369,.T.); +#24369 = EDGE_LOOP('',(#24370,#24371,#24372,#24380)); +#24370 = ORIENTED_EDGE('',*,*,#24349,.F.); +#24371 = ORIENTED_EDGE('',*,*,#21164,.T.); +#24372 = ORIENTED_EDGE('',*,*,#24373,.T.); +#24373 = EDGE_CURVE('',#21157,#24374,#24376,.T.); +#24374 = VERTEX_POINT('',#24375); +#24375 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#24376 = LINE('',#24377,#24378); +#24377 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#24378 = VECTOR('',#24379,1.); +#24379 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24380 = ORIENTED_EDGE('',*,*,#24381,.F.); +#24381 = EDGE_CURVE('',#24350,#24374,#24382,.T.); +#24382 = LINE('',#24383,#24384); +#24383 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#24384 = VECTOR('',#24385,1.); +#24385 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24386 = PLANE('',#24387); +#24387 = AXIS2_PLACEMENT_3D('',#24388,#24389,#24390); +#24388 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#24389 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24390 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24391 = ADVANCED_FACE('',(#24392),#24410,.T.); +#24392 = FACE_BOUND('',#24393,.T.); +#24393 = EDGE_LOOP('',(#24394,#24395,#24396,#24404)); +#24394 = ORIENTED_EDGE('',*,*,#24373,.F.); +#24395 = ORIENTED_EDGE('',*,*,#21156,.T.); +#24396 = ORIENTED_EDGE('',*,*,#24397,.T.); +#24397 = EDGE_CURVE('',#21149,#24398,#24400,.T.); +#24398 = VERTEX_POINT('',#24399); +#24399 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#24400 = LINE('',#24401,#24402); +#24401 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#24402 = VECTOR('',#24403,1.); +#24403 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24404 = ORIENTED_EDGE('',*,*,#24405,.F.); +#24405 = EDGE_CURVE('',#24374,#24398,#24406,.T.); +#24406 = LINE('',#24407,#24408); +#24407 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#24408 = VECTOR('',#24409,1.); +#24409 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24410 = PLANE('',#24411); +#24411 = AXIS2_PLACEMENT_3D('',#24412,#24413,#24414); +#24412 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#24413 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24414 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24415 = ADVANCED_FACE('',(#24416),#24427,.T.); +#24416 = FACE_BOUND('',#24417,.T.); +#24417 = EDGE_LOOP('',(#24418,#24419,#24420,#24421)); +#24418 = ORIENTED_EDGE('',*,*,#24397,.F.); +#24419 = ORIENTED_EDGE('',*,*,#21148,.T.); +#24420 = ORIENTED_EDGE('',*,*,#24340,.T.); +#24421 = ORIENTED_EDGE('',*,*,#24422,.F.); +#24422 = EDGE_CURVE('',#24398,#24341,#24423,.T.); +#24423 = LINE('',#24424,#24425); +#24424 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#24425 = VECTOR('',#24426,1.); +#24426 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24427 = PLANE('',#24428); +#24428 = AXIS2_PLACEMENT_3D('',#24429,#24430,#24431); +#24429 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#24430 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24431 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24432 = ADVANCED_FACE('',(#24433),#24458,.T.); +#24433 = FACE_BOUND('',#24434,.T.); +#24434 = EDGE_LOOP('',(#24435,#24443,#24444,#24452)); +#24435 = ORIENTED_EDGE('',*,*,#24436,.F.); +#24436 = EDGE_CURVE('',#21173,#24437,#24439,.T.); +#24437 = VERTEX_POINT('',#24438); +#24438 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#24439 = LINE('',#24440,#24441); +#24440 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#24441 = VECTOR('',#24442,1.); +#24442 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24443 = ORIENTED_EDGE('',*,*,#21172,.T.); +#24444 = ORIENTED_EDGE('',*,*,#24445,.T.); +#24445 = EDGE_CURVE('',#21175,#24446,#24448,.T.); +#24446 = VERTEX_POINT('',#24447); +#24447 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#24448 = LINE('',#24449,#24450); +#24449 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#24450 = VECTOR('',#24451,1.); +#24451 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24452 = ORIENTED_EDGE('',*,*,#24453,.F.); +#24453 = EDGE_CURVE('',#24437,#24446,#24454,.T.); +#24454 = LINE('',#24455,#24456); +#24455 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#24456 = VECTOR('',#24457,1.); +#24457 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24458 = PLANE('',#24459); +#24459 = AXIS2_PLACEMENT_3D('',#24460,#24461,#24462); +#24460 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#24461 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24462 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24463 = ADVANCED_FACE('',(#24464),#24482,.T.); +#24464 = FACE_BOUND('',#24465,.T.); +#24465 = EDGE_LOOP('',(#24466,#24467,#24468,#24476)); +#24466 = ORIENTED_EDGE('',*,*,#24445,.F.); +#24467 = ORIENTED_EDGE('',*,*,#21198,.T.); +#24468 = ORIENTED_EDGE('',*,*,#24469,.T.); +#24469 = EDGE_CURVE('',#21191,#24470,#24472,.T.); +#24470 = VERTEX_POINT('',#24471); +#24471 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#24472 = LINE('',#24473,#24474); +#24473 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#24474 = VECTOR('',#24475,1.); +#24475 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24476 = ORIENTED_EDGE('',*,*,#24477,.F.); +#24477 = EDGE_CURVE('',#24446,#24470,#24478,.T.); +#24478 = LINE('',#24479,#24480); +#24479 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#24480 = VECTOR('',#24481,1.); +#24481 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24482 = PLANE('',#24483); +#24483 = AXIS2_PLACEMENT_3D('',#24484,#24485,#24486); +#24484 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#24485 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24486 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24487 = ADVANCED_FACE('',(#24488),#24506,.T.); +#24488 = FACE_BOUND('',#24489,.T.); +#24489 = EDGE_LOOP('',(#24490,#24491,#24492,#24500)); +#24490 = ORIENTED_EDGE('',*,*,#24469,.F.); +#24491 = ORIENTED_EDGE('',*,*,#21190,.T.); +#24492 = ORIENTED_EDGE('',*,*,#24493,.T.); +#24493 = EDGE_CURVE('',#21183,#24494,#24496,.T.); +#24494 = VERTEX_POINT('',#24495); +#24495 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#24496 = LINE('',#24497,#24498); +#24497 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#24498 = VECTOR('',#24499,1.); +#24499 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24500 = ORIENTED_EDGE('',*,*,#24501,.F.); +#24501 = EDGE_CURVE('',#24470,#24494,#24502,.T.); +#24502 = LINE('',#24503,#24504); +#24503 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#24504 = VECTOR('',#24505,1.); +#24505 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24506 = PLANE('',#24507); +#24507 = AXIS2_PLACEMENT_3D('',#24508,#24509,#24510); +#24508 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#24509 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24510 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24511 = ADVANCED_FACE('',(#24512),#24523,.T.); +#24512 = FACE_BOUND('',#24513,.T.); +#24513 = EDGE_LOOP('',(#24514,#24515,#24516,#24517)); +#24514 = ORIENTED_EDGE('',*,*,#24493,.F.); +#24515 = ORIENTED_EDGE('',*,*,#21182,.T.); +#24516 = ORIENTED_EDGE('',*,*,#24436,.T.); +#24517 = ORIENTED_EDGE('',*,*,#24518,.F.); +#24518 = EDGE_CURVE('',#24494,#24437,#24519,.T.); +#24519 = LINE('',#24520,#24521); +#24520 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#24521 = VECTOR('',#24522,1.); +#24522 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24523 = PLANE('',#24524); +#24524 = AXIS2_PLACEMENT_3D('',#24525,#24526,#24527); +#24525 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#24526 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24527 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24528 = ADVANCED_FACE('',(#24529),#24540,.T.); +#24529 = FACE_BOUND('',#24530,.T.); +#24530 = EDGE_LOOP('',(#24531,#24532,#24533,#24539)); +#24531 = ORIENTED_EDGE('',*,*,#21262,.F.); +#24532 = ORIENTED_EDGE('',*,*,#21272,.T.); +#24533 = ORIENTED_EDGE('',*,*,#24534,.T.); +#24534 = EDGE_CURVE('',#21273,#21313,#24535,.T.); +#24535 = LINE('',#24536,#24537); +#24536 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#24537 = VECTOR('',#24538,1.); +#24538 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24539 = ORIENTED_EDGE('',*,*,#21320,.T.); +#24540 = PLANE('',#24541); +#24541 = AXIS2_PLACEMENT_3D('',#24542,#24543,#24544); +#24542 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#24543 = DIRECTION('',(0.,-0.,-1.)); +#24544 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24545 = ADVANCED_FACE('',(#24546),#24587,.F.); +#24546 = FACE_BOUND('',#24547,.F.); +#24547 = EDGE_LOOP('',(#24548,#24556,#24557,#24565,#24573,#24581)); +#24548 = ORIENTED_EDGE('',*,*,#24549,.T.); +#24549 = EDGE_CURVE('',#24550,#21313,#24552,.T.); +#24550 = VERTEX_POINT('',#24551); +#24551 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,-2.5)); +#24552 = LINE('',#24553,#24554); +#24553 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,-2.5)); +#24554 = VECTOR('',#24555,1.); +#24555 = DIRECTION('',(0.,0.,1.)); +#24556 = ORIENTED_EDGE('',*,*,#21312,.F.); +#24557 = ORIENTED_EDGE('',*,*,#24558,.T.); +#24558 = EDGE_CURVE('',#21305,#24559,#24561,.T.); +#24559 = VERTEX_POINT('',#24560); +#24560 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,-2.5)); +#24561 = LINE('',#24562,#24563); +#24562 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,0.2)); +#24563 = VECTOR('',#24564,1.); +#24564 = DIRECTION('',(0.,0.,-1.)); +#24565 = ORIENTED_EDGE('',*,*,#24566,.T.); +#24566 = EDGE_CURVE('',#24559,#24567,#24569,.T.); +#24567 = VERTEX_POINT('',#24568); +#24568 = CARTESIAN_POINT('',(9.999999999999E-02,-48.11,-3.1)); +#24569 = LINE('',#24570,#24571); +#24570 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,-2.5)); +#24571 = VECTOR('',#24572,1.); +#24572 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24573 = ORIENTED_EDGE('',*,*,#24574,.T.); +#24574 = EDGE_CURVE('',#24567,#24575,#24577,.T.); +#24575 = VERTEX_POINT('',#24576); +#24576 = CARTESIAN_POINT('',(9.999999999999E-02,-48.41,-3.1)); +#24577 = LINE('',#24578,#24579); +#24578 = CARTESIAN_POINT('',(9.999999999999E-02,-48.11,-3.1)); +#24579 = VECTOR('',#24580,1.); +#24580 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24581 = ORIENTED_EDGE('',*,*,#24582,.T.); +#24582 = EDGE_CURVE('',#24575,#24550,#24583,.T.); +#24583 = LINE('',#24584,#24585); +#24584 = CARTESIAN_POINT('',(9.999999999999E-02,-48.41,-3.1)); +#24585 = VECTOR('',#24586,1.); +#24586 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24587 = PLANE('',#24588); +#24588 = AXIS2_PLACEMENT_3D('',#24589,#24590,#24591); +#24589 = CARTESIAN_POINT('',(9.999999999999E-02,-48.26,3.911477598424)); +#24590 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24591 = DIRECTION('',(0.,0.,1.)); +#24592 = ADVANCED_FACE('',(#24593),#24604,.T.); +#24593 = FACE_BOUND('',#24594,.T.); +#24594 = EDGE_LOOP('',(#24595,#24601,#24602,#24603)); +#24595 = ORIENTED_EDGE('',*,*,#24596,.F.); +#24596 = EDGE_CURVE('',#21281,#21305,#24597,.T.); +#24597 = LINE('',#24598,#24599); +#24598 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#24599 = VECTOR('',#24600,1.); +#24600 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24601 = ORIENTED_EDGE('',*,*,#21288,.T.); +#24602 = ORIENTED_EDGE('',*,*,#21296,.T.); +#24603 = ORIENTED_EDGE('',*,*,#21304,.T.); +#24604 = PLANE('',#24605); +#24605 = AXIS2_PLACEMENT_3D('',#24606,#24607,#24608); +#24606 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#24607 = DIRECTION('',(0.,-0.,-1.)); +#24608 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24609 = ADVANCED_FACE('',(#24610),#24651,.T.); +#24610 = FACE_BOUND('',#24611,.T.); +#24611 = EDGE_LOOP('',(#24612,#24620,#24621,#24629,#24637,#24645)); +#24612 = ORIENTED_EDGE('',*,*,#24613,.T.); +#24613 = EDGE_CURVE('',#24614,#21273,#24616,.T.); +#24614 = VERTEX_POINT('',#24615); +#24615 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#24616 = LINE('',#24617,#24618); +#24617 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#24618 = VECTOR('',#24619,1.); +#24619 = DIRECTION('',(0.,0.,1.)); +#24620 = ORIENTED_EDGE('',*,*,#21280,.F.); +#24621 = ORIENTED_EDGE('',*,*,#24622,.T.); +#24622 = EDGE_CURVE('',#21281,#24623,#24625,.T.); +#24623 = VERTEX_POINT('',#24624); +#24624 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#24625 = LINE('',#24626,#24627); +#24626 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#24627 = VECTOR('',#24628,1.); +#24628 = DIRECTION('',(0.,0.,-1.)); +#24629 = ORIENTED_EDGE('',*,*,#24630,.T.); +#24630 = EDGE_CURVE('',#24623,#24631,#24633,.T.); +#24631 = VERTEX_POINT('',#24632); +#24632 = CARTESIAN_POINT('',(-0.1,-48.11,-3.1)); +#24633 = LINE('',#24634,#24635); +#24634 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#24635 = VECTOR('',#24636,1.); +#24636 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24637 = ORIENTED_EDGE('',*,*,#24638,.F.); +#24638 = EDGE_CURVE('',#24639,#24631,#24641,.T.); +#24639 = VERTEX_POINT('',#24640); +#24640 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#24641 = LINE('',#24642,#24643); +#24642 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#24643 = VECTOR('',#24644,1.); +#24644 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24645 = ORIENTED_EDGE('',*,*,#24646,.T.); +#24646 = EDGE_CURVE('',#24639,#24614,#24647,.T.); +#24647 = LINE('',#24648,#24649); +#24648 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#24649 = VECTOR('',#24650,1.); +#24650 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24651 = PLANE('',#24652); +#24652 = AXIS2_PLACEMENT_3D('',#24653,#24654,#24655); +#24653 = CARTESIAN_POINT('',(-0.1,-48.26,3.911477598424)); +#24654 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24655 = DIRECTION('',(0.,0.,1.)); +#24656 = ADVANCED_FACE('',(#24657),#24668,.T.); +#24657 = FACE_BOUND('',#24658,.T.); +#24658 = EDGE_LOOP('',(#24659,#24660,#24661,#24667)); +#24659 = ORIENTED_EDGE('',*,*,#21328,.F.); +#24660 = ORIENTED_EDGE('',*,*,#21338,.T.); +#24661 = ORIENTED_EDGE('',*,*,#24662,.T.); +#24662 = EDGE_CURVE('',#21339,#21379,#24663,.T.); +#24663 = LINE('',#24664,#24665); +#24664 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#24665 = VECTOR('',#24666,1.); +#24666 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24667 = ORIENTED_EDGE('',*,*,#21386,.T.); +#24668 = PLANE('',#24669); +#24669 = AXIS2_PLACEMENT_3D('',#24670,#24671,#24672); +#24670 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#24671 = DIRECTION('',(0.,-0.,-1.)); +#24672 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24673 = ADVANCED_FACE('',(#24674),#24715,.F.); +#24674 = FACE_BOUND('',#24675,.F.); +#24675 = EDGE_LOOP('',(#24676,#24684,#24685,#24693,#24701,#24709)); +#24676 = ORIENTED_EDGE('',*,*,#24677,.T.); +#24677 = EDGE_CURVE('',#24678,#21379,#24680,.T.); +#24678 = VERTEX_POINT('',#24679); +#24679 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,-2.5)); +#24680 = LINE('',#24681,#24682); +#24681 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,-2.5)); +#24682 = VECTOR('',#24683,1.); +#24683 = DIRECTION('',(0.,0.,1.)); +#24684 = ORIENTED_EDGE('',*,*,#21378,.F.); +#24685 = ORIENTED_EDGE('',*,*,#24686,.T.); +#24686 = EDGE_CURVE('',#21371,#24687,#24689,.T.); +#24687 = VERTEX_POINT('',#24688); +#24688 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,-2.5)); +#24689 = LINE('',#24690,#24691); +#24690 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,0.2)); +#24691 = VECTOR('',#24692,1.); +#24692 = DIRECTION('',(0.,0.,-1.)); +#24693 = ORIENTED_EDGE('',*,*,#24694,.T.); +#24694 = EDGE_CURVE('',#24687,#24695,#24697,.T.); +#24695 = VERTEX_POINT('',#24696); +#24696 = CARTESIAN_POINT('',(9.999999999999E-02,-45.57,-3.1)); +#24697 = LINE('',#24698,#24699); +#24698 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,-2.5)); +#24699 = VECTOR('',#24700,1.); +#24700 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24701 = ORIENTED_EDGE('',*,*,#24702,.T.); +#24702 = EDGE_CURVE('',#24695,#24703,#24705,.T.); +#24703 = VERTEX_POINT('',#24704); +#24704 = CARTESIAN_POINT('',(9.999999999999E-02,-45.87,-3.1)); +#24705 = LINE('',#24706,#24707); +#24706 = CARTESIAN_POINT('',(9.999999999999E-02,-45.57,-3.1)); +#24707 = VECTOR('',#24708,1.); +#24708 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24709 = ORIENTED_EDGE('',*,*,#24710,.T.); +#24710 = EDGE_CURVE('',#24703,#24678,#24711,.T.); +#24711 = LINE('',#24712,#24713); +#24712 = CARTESIAN_POINT('',(9.999999999999E-02,-45.87,-3.1)); +#24713 = VECTOR('',#24714,1.); +#24714 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24715 = PLANE('',#24716); +#24716 = AXIS2_PLACEMENT_3D('',#24717,#24718,#24719); +#24717 = CARTESIAN_POINT('',(9.999999999999E-02,-45.72,3.911477598424)); +#24718 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24719 = DIRECTION('',(0.,0.,1.)); +#24720 = ADVANCED_FACE('',(#24721),#24732,.T.); +#24721 = FACE_BOUND('',#24722,.T.); +#24722 = EDGE_LOOP('',(#24723,#24729,#24730,#24731)); +#24723 = ORIENTED_EDGE('',*,*,#24724,.F.); +#24724 = EDGE_CURVE('',#21347,#21371,#24725,.T.); +#24725 = LINE('',#24726,#24727); +#24726 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#24727 = VECTOR('',#24728,1.); +#24728 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24729 = ORIENTED_EDGE('',*,*,#21354,.T.); +#24730 = ORIENTED_EDGE('',*,*,#21362,.T.); +#24731 = ORIENTED_EDGE('',*,*,#21370,.T.); +#24732 = PLANE('',#24733); +#24733 = AXIS2_PLACEMENT_3D('',#24734,#24735,#24736); +#24734 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#24735 = DIRECTION('',(0.,-0.,-1.)); +#24736 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24737 = ADVANCED_FACE('',(#24738),#24779,.T.); +#24738 = FACE_BOUND('',#24739,.T.); +#24739 = EDGE_LOOP('',(#24740,#24748,#24749,#24757,#24765,#24773)); +#24740 = ORIENTED_EDGE('',*,*,#24741,.T.); +#24741 = EDGE_CURVE('',#24742,#21339,#24744,.T.); +#24742 = VERTEX_POINT('',#24743); +#24743 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#24744 = LINE('',#24745,#24746); +#24745 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#24746 = VECTOR('',#24747,1.); +#24747 = DIRECTION('',(0.,0.,1.)); +#24748 = ORIENTED_EDGE('',*,*,#21346,.F.); +#24749 = ORIENTED_EDGE('',*,*,#24750,.T.); +#24750 = EDGE_CURVE('',#21347,#24751,#24753,.T.); +#24751 = VERTEX_POINT('',#24752); +#24752 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#24753 = LINE('',#24754,#24755); +#24754 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#24755 = VECTOR('',#24756,1.); +#24756 = DIRECTION('',(0.,0.,-1.)); +#24757 = ORIENTED_EDGE('',*,*,#24758,.T.); +#24758 = EDGE_CURVE('',#24751,#24759,#24761,.T.); +#24759 = VERTEX_POINT('',#24760); +#24760 = CARTESIAN_POINT('',(-0.1,-45.57,-3.1)); +#24761 = LINE('',#24762,#24763); +#24762 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#24763 = VECTOR('',#24764,1.); +#24764 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24765 = ORIENTED_EDGE('',*,*,#24766,.F.); +#24766 = EDGE_CURVE('',#24767,#24759,#24769,.T.); +#24767 = VERTEX_POINT('',#24768); +#24768 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#24769 = LINE('',#24770,#24771); +#24770 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#24771 = VECTOR('',#24772,1.); +#24772 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24773 = ORIENTED_EDGE('',*,*,#24774,.T.); +#24774 = EDGE_CURVE('',#24767,#24742,#24775,.T.); +#24775 = LINE('',#24776,#24777); +#24776 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#24777 = VECTOR('',#24778,1.); +#24778 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24779 = PLANE('',#24780); +#24780 = AXIS2_PLACEMENT_3D('',#24781,#24782,#24783); +#24781 = CARTESIAN_POINT('',(-0.1,-45.72,3.911477598424)); +#24782 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24783 = DIRECTION('',(0.,0.,1.)); +#24784 = ADVANCED_FACE('',(#24785),#24796,.T.); +#24785 = FACE_BOUND('',#24786,.T.); +#24786 = EDGE_LOOP('',(#24787,#24788,#24789,#24795)); +#24787 = ORIENTED_EDGE('',*,*,#21394,.F.); +#24788 = ORIENTED_EDGE('',*,*,#21404,.T.); +#24789 = ORIENTED_EDGE('',*,*,#24790,.T.); +#24790 = EDGE_CURVE('',#21405,#21445,#24791,.T.); +#24791 = LINE('',#24792,#24793); +#24792 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#24793 = VECTOR('',#24794,1.); +#24794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24795 = ORIENTED_EDGE('',*,*,#21452,.T.); +#24796 = PLANE('',#24797); +#24797 = AXIS2_PLACEMENT_3D('',#24798,#24799,#24800); +#24798 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#24799 = DIRECTION('',(0.,-0.,-1.)); +#24800 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24801 = ADVANCED_FACE('',(#24802),#24843,.F.); +#24802 = FACE_BOUND('',#24803,.F.); +#24803 = EDGE_LOOP('',(#24804,#24812,#24813,#24821,#24829,#24837)); +#24804 = ORIENTED_EDGE('',*,*,#24805,.T.); +#24805 = EDGE_CURVE('',#24806,#21445,#24808,.T.); +#24806 = VERTEX_POINT('',#24807); +#24807 = CARTESIAN_POINT('',(0.1,-43.48,-2.5)); +#24808 = LINE('',#24809,#24810); +#24809 = CARTESIAN_POINT('',(0.1,-43.48,-2.5)); +#24810 = VECTOR('',#24811,1.); +#24811 = DIRECTION('',(0.,0.,1.)); +#24812 = ORIENTED_EDGE('',*,*,#21444,.F.); +#24813 = ORIENTED_EDGE('',*,*,#24814,.T.); +#24814 = EDGE_CURVE('',#21437,#24815,#24817,.T.); +#24815 = VERTEX_POINT('',#24816); +#24816 = CARTESIAN_POINT('',(0.1,-42.88,-2.5)); +#24817 = LINE('',#24818,#24819); +#24818 = CARTESIAN_POINT('',(0.1,-42.88,0.2)); +#24819 = VECTOR('',#24820,1.); +#24820 = DIRECTION('',(0.,0.,-1.)); +#24821 = ORIENTED_EDGE('',*,*,#24822,.T.); +#24822 = EDGE_CURVE('',#24815,#24823,#24825,.T.); +#24823 = VERTEX_POINT('',#24824); +#24824 = CARTESIAN_POINT('',(0.1,-43.03,-3.1)); +#24825 = LINE('',#24826,#24827); +#24826 = CARTESIAN_POINT('',(0.1,-42.88,-2.5)); +#24827 = VECTOR('',#24828,1.); +#24828 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24829 = ORIENTED_EDGE('',*,*,#24830,.T.); +#24830 = EDGE_CURVE('',#24823,#24831,#24833,.T.); +#24831 = VERTEX_POINT('',#24832); +#24832 = CARTESIAN_POINT('',(0.1,-43.33,-3.1)); +#24833 = LINE('',#24834,#24835); +#24834 = CARTESIAN_POINT('',(0.1,-43.03,-3.1)); +#24835 = VECTOR('',#24836,1.); +#24836 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24837 = ORIENTED_EDGE('',*,*,#24838,.T.); +#24838 = EDGE_CURVE('',#24831,#24806,#24839,.T.); +#24839 = LINE('',#24840,#24841); +#24840 = CARTESIAN_POINT('',(0.1,-43.33,-3.1)); +#24841 = VECTOR('',#24842,1.); +#24842 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24843 = PLANE('',#24844); +#24844 = AXIS2_PLACEMENT_3D('',#24845,#24846,#24847); +#24845 = CARTESIAN_POINT('',(0.1,-43.18,3.911477598424)); +#24846 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24847 = DIRECTION('',(0.,0.,1.)); +#24848 = ADVANCED_FACE('',(#24849),#24860,.T.); +#24849 = FACE_BOUND('',#24850,.T.); +#24850 = EDGE_LOOP('',(#24851,#24857,#24858,#24859)); +#24851 = ORIENTED_EDGE('',*,*,#24852,.F.); +#24852 = EDGE_CURVE('',#21413,#21437,#24853,.T.); +#24853 = LINE('',#24854,#24855); +#24854 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#24855 = VECTOR('',#24856,1.); +#24856 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24857 = ORIENTED_EDGE('',*,*,#21420,.T.); +#24858 = ORIENTED_EDGE('',*,*,#21428,.T.); +#24859 = ORIENTED_EDGE('',*,*,#21436,.T.); +#24860 = PLANE('',#24861); +#24861 = AXIS2_PLACEMENT_3D('',#24862,#24863,#24864); +#24862 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#24863 = DIRECTION('',(0.,-0.,-1.)); +#24864 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24865 = ADVANCED_FACE('',(#24866),#24907,.T.); +#24866 = FACE_BOUND('',#24867,.T.); +#24867 = EDGE_LOOP('',(#24868,#24876,#24877,#24885,#24893,#24901)); +#24868 = ORIENTED_EDGE('',*,*,#24869,.T.); +#24869 = EDGE_CURVE('',#24870,#21405,#24872,.T.); +#24870 = VERTEX_POINT('',#24871); +#24871 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#24872 = LINE('',#24873,#24874); +#24873 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#24874 = VECTOR('',#24875,1.); +#24875 = DIRECTION('',(0.,0.,1.)); +#24876 = ORIENTED_EDGE('',*,*,#21412,.F.); +#24877 = ORIENTED_EDGE('',*,*,#24878,.T.); +#24878 = EDGE_CURVE('',#21413,#24879,#24881,.T.); +#24879 = VERTEX_POINT('',#24880); +#24880 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#24881 = LINE('',#24882,#24883); +#24882 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#24883 = VECTOR('',#24884,1.); +#24884 = DIRECTION('',(0.,0.,-1.)); +#24885 = ORIENTED_EDGE('',*,*,#24886,.T.); +#24886 = EDGE_CURVE('',#24879,#24887,#24889,.T.); +#24887 = VERTEX_POINT('',#24888); +#24888 = CARTESIAN_POINT('',(-0.1,-43.03,-3.1)); +#24889 = LINE('',#24890,#24891); +#24890 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#24891 = VECTOR('',#24892,1.); +#24892 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24893 = ORIENTED_EDGE('',*,*,#24894,.F.); +#24894 = EDGE_CURVE('',#24895,#24887,#24897,.T.); +#24895 = VERTEX_POINT('',#24896); +#24896 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#24897 = LINE('',#24898,#24899); +#24898 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#24899 = VECTOR('',#24900,1.); +#24900 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24901 = ORIENTED_EDGE('',*,*,#24902,.T.); +#24902 = EDGE_CURVE('',#24895,#24870,#24903,.T.); +#24903 = LINE('',#24904,#24905); +#24904 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#24905 = VECTOR('',#24906,1.); +#24906 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24907 = PLANE('',#24908); +#24908 = AXIS2_PLACEMENT_3D('',#24909,#24910,#24911); +#24909 = CARTESIAN_POINT('',(-0.1,-43.18,3.911477598424)); +#24910 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24911 = DIRECTION('',(0.,0.,1.)); +#24912 = ADVANCED_FACE('',(#24913),#24924,.T.); +#24913 = FACE_BOUND('',#24914,.T.); +#24914 = EDGE_LOOP('',(#24915,#24916,#24917,#24923)); +#24915 = ORIENTED_EDGE('',*,*,#21460,.F.); +#24916 = ORIENTED_EDGE('',*,*,#21470,.T.); +#24917 = ORIENTED_EDGE('',*,*,#24918,.T.); +#24918 = EDGE_CURVE('',#21471,#21511,#24919,.T.); +#24919 = LINE('',#24920,#24921); +#24920 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#24921 = VECTOR('',#24922,1.); +#24922 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24923 = ORIENTED_EDGE('',*,*,#21518,.T.); +#24924 = PLANE('',#24925); +#24925 = AXIS2_PLACEMENT_3D('',#24926,#24927,#24928); +#24926 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#24927 = DIRECTION('',(0.,-0.,-1.)); +#24928 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24929 = ADVANCED_FACE('',(#24930),#24971,.F.); +#24930 = FACE_BOUND('',#24931,.F.); +#24931 = EDGE_LOOP('',(#24932,#24940,#24941,#24949,#24957,#24965)); +#24932 = ORIENTED_EDGE('',*,*,#24933,.T.); +#24933 = EDGE_CURVE('',#24934,#21511,#24936,.T.); +#24934 = VERTEX_POINT('',#24935); +#24935 = CARTESIAN_POINT('',(0.1,-40.94,-2.5)); +#24936 = LINE('',#24937,#24938); +#24937 = CARTESIAN_POINT('',(0.1,-40.94,-2.5)); +#24938 = VECTOR('',#24939,1.); +#24939 = DIRECTION('',(0.,0.,1.)); +#24940 = ORIENTED_EDGE('',*,*,#21510,.F.); +#24941 = ORIENTED_EDGE('',*,*,#24942,.T.); +#24942 = EDGE_CURVE('',#21503,#24943,#24945,.T.); +#24943 = VERTEX_POINT('',#24944); +#24944 = CARTESIAN_POINT('',(0.1,-40.34,-2.5)); +#24945 = LINE('',#24946,#24947); +#24946 = CARTESIAN_POINT('',(0.1,-40.34,0.2)); +#24947 = VECTOR('',#24948,1.); +#24948 = DIRECTION('',(0.,0.,-1.)); +#24949 = ORIENTED_EDGE('',*,*,#24950,.T.); +#24950 = EDGE_CURVE('',#24943,#24951,#24953,.T.); +#24951 = VERTEX_POINT('',#24952); +#24952 = CARTESIAN_POINT('',(0.1,-40.49,-3.1)); +#24953 = LINE('',#24954,#24955); +#24954 = CARTESIAN_POINT('',(0.1,-40.34,-2.5)); +#24955 = VECTOR('',#24956,1.); +#24956 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24957 = ORIENTED_EDGE('',*,*,#24958,.T.); +#24958 = EDGE_CURVE('',#24951,#24959,#24961,.T.); +#24959 = VERTEX_POINT('',#24960); +#24960 = CARTESIAN_POINT('',(0.1,-40.79,-3.1)); +#24961 = LINE('',#24962,#24963); +#24962 = CARTESIAN_POINT('',(0.1,-40.49,-3.1)); +#24963 = VECTOR('',#24964,1.); +#24964 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24965 = ORIENTED_EDGE('',*,*,#24966,.T.); +#24966 = EDGE_CURVE('',#24959,#24934,#24967,.T.); +#24967 = LINE('',#24968,#24969); +#24968 = CARTESIAN_POINT('',(0.1,-40.79,-3.1)); +#24969 = VECTOR('',#24970,1.); +#24970 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24971 = PLANE('',#24972); +#24972 = AXIS2_PLACEMENT_3D('',#24973,#24974,#24975); +#24973 = CARTESIAN_POINT('',(0.1,-40.64,3.911477598424)); +#24974 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24975 = DIRECTION('',(0.,0.,1.)); +#24976 = ADVANCED_FACE('',(#24977),#24988,.T.); +#24977 = FACE_BOUND('',#24978,.T.); +#24978 = EDGE_LOOP('',(#24979,#24985,#24986,#24987)); +#24979 = ORIENTED_EDGE('',*,*,#24980,.F.); +#24980 = EDGE_CURVE('',#21479,#21503,#24981,.T.); +#24981 = LINE('',#24982,#24983); +#24982 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#24983 = VECTOR('',#24984,1.); +#24984 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24985 = ORIENTED_EDGE('',*,*,#21486,.T.); +#24986 = ORIENTED_EDGE('',*,*,#21494,.T.); +#24987 = ORIENTED_EDGE('',*,*,#21502,.T.); +#24988 = PLANE('',#24989); +#24989 = AXIS2_PLACEMENT_3D('',#24990,#24991,#24992); +#24990 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#24991 = DIRECTION('',(0.,-0.,-1.)); +#24992 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24993 = ADVANCED_FACE('',(#24994),#25035,.T.); +#24994 = FACE_BOUND('',#24995,.T.); +#24995 = EDGE_LOOP('',(#24996,#25004,#25005,#25013,#25021,#25029)); +#24996 = ORIENTED_EDGE('',*,*,#24997,.T.); +#24997 = EDGE_CURVE('',#24998,#21471,#25000,.T.); +#24998 = VERTEX_POINT('',#24999); +#24999 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#25000 = LINE('',#25001,#25002); +#25001 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#25002 = VECTOR('',#25003,1.); +#25003 = DIRECTION('',(0.,0.,1.)); +#25004 = ORIENTED_EDGE('',*,*,#21478,.F.); +#25005 = ORIENTED_EDGE('',*,*,#25006,.T.); +#25006 = EDGE_CURVE('',#21479,#25007,#25009,.T.); +#25007 = VERTEX_POINT('',#25008); +#25008 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#25009 = LINE('',#25010,#25011); +#25010 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#25011 = VECTOR('',#25012,1.); +#25012 = DIRECTION('',(0.,0.,-1.)); +#25013 = ORIENTED_EDGE('',*,*,#25014,.T.); +#25014 = EDGE_CURVE('',#25007,#25015,#25017,.T.); +#25015 = VERTEX_POINT('',#25016); +#25016 = CARTESIAN_POINT('',(-0.1,-40.49,-3.1)); +#25017 = LINE('',#25018,#25019); +#25018 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#25019 = VECTOR('',#25020,1.); +#25020 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25021 = ORIENTED_EDGE('',*,*,#25022,.F.); +#25022 = EDGE_CURVE('',#25023,#25015,#25025,.T.); +#25023 = VERTEX_POINT('',#25024); +#25024 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#25025 = LINE('',#25026,#25027); +#25026 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#25027 = VECTOR('',#25028,1.); +#25028 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25029 = ORIENTED_EDGE('',*,*,#25030,.T.); +#25030 = EDGE_CURVE('',#25023,#24998,#25031,.T.); +#25031 = LINE('',#25032,#25033); +#25032 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#25033 = VECTOR('',#25034,1.); +#25034 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25035 = PLANE('',#25036); +#25036 = AXIS2_PLACEMENT_3D('',#25037,#25038,#25039); +#25037 = CARTESIAN_POINT('',(-0.1,-40.64,3.911477598424)); +#25038 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25039 = DIRECTION('',(0.,0.,1.)); +#25040 = ADVANCED_FACE('',(#25041),#25052,.T.); +#25041 = FACE_BOUND('',#25042,.T.); +#25042 = EDGE_LOOP('',(#25043,#25044,#25045,#25051)); +#25043 = ORIENTED_EDGE('',*,*,#21526,.F.); +#25044 = ORIENTED_EDGE('',*,*,#21536,.T.); +#25045 = ORIENTED_EDGE('',*,*,#25046,.T.); +#25046 = EDGE_CURVE('',#21537,#21577,#25047,.T.); +#25047 = LINE('',#25048,#25049); +#25048 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#25049 = VECTOR('',#25050,1.); +#25050 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25051 = ORIENTED_EDGE('',*,*,#21584,.T.); +#25052 = PLANE('',#25053); +#25053 = AXIS2_PLACEMENT_3D('',#25054,#25055,#25056); +#25054 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#25055 = DIRECTION('',(0.,-0.,-1.)); +#25056 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25057 = ADVANCED_FACE('',(#25058),#25099,.F.); +#25058 = FACE_BOUND('',#25059,.F.); +#25059 = EDGE_LOOP('',(#25060,#25068,#25069,#25077,#25085,#25093)); +#25060 = ORIENTED_EDGE('',*,*,#25061,.T.); +#25061 = EDGE_CURVE('',#25062,#21577,#25064,.T.); +#25062 = VERTEX_POINT('',#25063); +#25063 = CARTESIAN_POINT('',(0.1,-38.4,-2.5)); +#25064 = LINE('',#25065,#25066); +#25065 = CARTESIAN_POINT('',(0.1,-38.4,-2.5)); +#25066 = VECTOR('',#25067,1.); +#25067 = DIRECTION('',(0.,0.,1.)); +#25068 = ORIENTED_EDGE('',*,*,#21576,.F.); +#25069 = ORIENTED_EDGE('',*,*,#25070,.T.); +#25070 = EDGE_CURVE('',#21569,#25071,#25073,.T.); +#25071 = VERTEX_POINT('',#25072); +#25072 = CARTESIAN_POINT('',(0.1,-37.8,-2.5)); +#25073 = LINE('',#25074,#25075); +#25074 = CARTESIAN_POINT('',(0.1,-37.8,0.2)); +#25075 = VECTOR('',#25076,1.); +#25076 = DIRECTION('',(0.,0.,-1.)); +#25077 = ORIENTED_EDGE('',*,*,#25078,.T.); +#25078 = EDGE_CURVE('',#25071,#25079,#25081,.T.); +#25079 = VERTEX_POINT('',#25080); +#25080 = CARTESIAN_POINT('',(0.1,-37.95,-3.1)); +#25081 = LINE('',#25082,#25083); +#25082 = CARTESIAN_POINT('',(0.1,-37.8,-2.5)); +#25083 = VECTOR('',#25084,1.); +#25084 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25085 = ORIENTED_EDGE('',*,*,#25086,.T.); +#25086 = EDGE_CURVE('',#25079,#25087,#25089,.T.); +#25087 = VERTEX_POINT('',#25088); +#25088 = CARTESIAN_POINT('',(0.1,-38.25,-3.1)); +#25089 = LINE('',#25090,#25091); +#25090 = CARTESIAN_POINT('',(0.1,-37.95,-3.1)); +#25091 = VECTOR('',#25092,1.); +#25092 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25093 = ORIENTED_EDGE('',*,*,#25094,.T.); +#25094 = EDGE_CURVE('',#25087,#25062,#25095,.T.); +#25095 = LINE('',#25096,#25097); +#25096 = CARTESIAN_POINT('',(0.1,-38.25,-3.1)); +#25097 = VECTOR('',#25098,1.); +#25098 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25099 = PLANE('',#25100); +#25100 = AXIS2_PLACEMENT_3D('',#25101,#25102,#25103); +#25101 = CARTESIAN_POINT('',(0.1,-38.1,3.911477598424)); +#25102 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25103 = DIRECTION('',(0.,0.,1.)); +#25104 = ADVANCED_FACE('',(#25105),#25116,.T.); +#25105 = FACE_BOUND('',#25106,.T.); +#25106 = EDGE_LOOP('',(#25107,#25113,#25114,#25115)); +#25107 = ORIENTED_EDGE('',*,*,#25108,.F.); +#25108 = EDGE_CURVE('',#21545,#21569,#25109,.T.); +#25109 = LINE('',#25110,#25111); +#25110 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#25111 = VECTOR('',#25112,1.); +#25112 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25113 = ORIENTED_EDGE('',*,*,#21552,.T.); +#25114 = ORIENTED_EDGE('',*,*,#21560,.T.); +#25115 = ORIENTED_EDGE('',*,*,#21568,.T.); +#25116 = PLANE('',#25117); +#25117 = AXIS2_PLACEMENT_3D('',#25118,#25119,#25120); +#25118 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#25119 = DIRECTION('',(0.,-0.,-1.)); +#25120 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25121 = ADVANCED_FACE('',(#25122),#25163,.T.); +#25122 = FACE_BOUND('',#25123,.T.); +#25123 = EDGE_LOOP('',(#25124,#25132,#25133,#25141,#25149,#25157)); +#25124 = ORIENTED_EDGE('',*,*,#25125,.T.); +#25125 = EDGE_CURVE('',#25126,#21537,#25128,.T.); +#25126 = VERTEX_POINT('',#25127); +#25127 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#25128 = LINE('',#25129,#25130); +#25129 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#25130 = VECTOR('',#25131,1.); +#25131 = DIRECTION('',(0.,0.,1.)); +#25132 = ORIENTED_EDGE('',*,*,#21544,.F.); +#25133 = ORIENTED_EDGE('',*,*,#25134,.T.); +#25134 = EDGE_CURVE('',#21545,#25135,#25137,.T.); +#25135 = VERTEX_POINT('',#25136); +#25136 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#25137 = LINE('',#25138,#25139); +#25138 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#25139 = VECTOR('',#25140,1.); +#25140 = DIRECTION('',(0.,0.,-1.)); +#25141 = ORIENTED_EDGE('',*,*,#25142,.T.); +#25142 = EDGE_CURVE('',#25135,#25143,#25145,.T.); +#25143 = VERTEX_POINT('',#25144); +#25144 = CARTESIAN_POINT('',(-0.1,-37.95,-3.1)); +#25145 = LINE('',#25146,#25147); +#25146 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#25147 = VECTOR('',#25148,1.); +#25148 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25149 = ORIENTED_EDGE('',*,*,#25150,.F.); +#25150 = EDGE_CURVE('',#25151,#25143,#25153,.T.); +#25151 = VERTEX_POINT('',#25152); +#25152 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#25153 = LINE('',#25154,#25155); +#25154 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#25155 = VECTOR('',#25156,1.); +#25156 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25157 = ORIENTED_EDGE('',*,*,#25158,.T.); +#25158 = EDGE_CURVE('',#25151,#25126,#25159,.T.); +#25159 = LINE('',#25160,#25161); +#25160 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#25161 = VECTOR('',#25162,1.); +#25162 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25163 = PLANE('',#25164); +#25164 = AXIS2_PLACEMENT_3D('',#25165,#25166,#25167); +#25165 = CARTESIAN_POINT('',(-0.1,-38.1,3.911477598424)); +#25166 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25167 = DIRECTION('',(0.,0.,1.)); +#25168 = ADVANCED_FACE('',(#25169),#25180,.T.); +#25169 = FACE_BOUND('',#25170,.T.); +#25170 = EDGE_LOOP('',(#25171,#25172,#25173,#25179)); +#25171 = ORIENTED_EDGE('',*,*,#21592,.F.); +#25172 = ORIENTED_EDGE('',*,*,#21602,.T.); +#25173 = ORIENTED_EDGE('',*,*,#25174,.T.); +#25174 = EDGE_CURVE('',#21603,#21643,#25175,.T.); +#25175 = LINE('',#25176,#25177); +#25176 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#25177 = VECTOR('',#25178,1.); +#25178 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25179 = ORIENTED_EDGE('',*,*,#21650,.T.); +#25180 = PLANE('',#25181); +#25181 = AXIS2_PLACEMENT_3D('',#25182,#25183,#25184); +#25182 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#25183 = DIRECTION('',(0.,-0.,-1.)); +#25184 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25185 = ADVANCED_FACE('',(#25186),#25227,.F.); +#25186 = FACE_BOUND('',#25187,.F.); +#25187 = EDGE_LOOP('',(#25188,#25196,#25197,#25205,#25213,#25221)); +#25188 = ORIENTED_EDGE('',*,*,#25189,.T.); +#25189 = EDGE_CURVE('',#25190,#21643,#25192,.T.); +#25190 = VERTEX_POINT('',#25191); +#25191 = CARTESIAN_POINT('',(0.1,-35.86,-2.5)); +#25192 = LINE('',#25193,#25194); +#25193 = CARTESIAN_POINT('',(0.1,-35.86,-2.5)); +#25194 = VECTOR('',#25195,1.); +#25195 = DIRECTION('',(0.,0.,1.)); +#25196 = ORIENTED_EDGE('',*,*,#21642,.F.); +#25197 = ORIENTED_EDGE('',*,*,#25198,.T.); +#25198 = EDGE_CURVE('',#21635,#25199,#25201,.T.); +#25199 = VERTEX_POINT('',#25200); +#25200 = CARTESIAN_POINT('',(0.1,-35.26,-2.5)); +#25201 = LINE('',#25202,#25203); +#25202 = CARTESIAN_POINT('',(0.1,-35.26,0.2)); +#25203 = VECTOR('',#25204,1.); +#25204 = DIRECTION('',(0.,0.,-1.)); +#25205 = ORIENTED_EDGE('',*,*,#25206,.T.); +#25206 = EDGE_CURVE('',#25199,#25207,#25209,.T.); +#25207 = VERTEX_POINT('',#25208); +#25208 = CARTESIAN_POINT('',(0.1,-35.41,-3.1)); +#25209 = LINE('',#25210,#25211); +#25210 = CARTESIAN_POINT('',(0.1,-35.26,-2.5)); +#25211 = VECTOR('',#25212,1.); +#25212 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25213 = ORIENTED_EDGE('',*,*,#25214,.T.); +#25214 = EDGE_CURVE('',#25207,#25215,#25217,.T.); +#25215 = VERTEX_POINT('',#25216); +#25216 = CARTESIAN_POINT('',(0.1,-35.71,-3.1)); +#25217 = LINE('',#25218,#25219); +#25218 = CARTESIAN_POINT('',(0.1,-35.41,-3.1)); +#25219 = VECTOR('',#25220,1.); +#25220 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25221 = ORIENTED_EDGE('',*,*,#25222,.T.); +#25222 = EDGE_CURVE('',#25215,#25190,#25223,.T.); +#25223 = LINE('',#25224,#25225); +#25224 = CARTESIAN_POINT('',(0.1,-35.71,-3.1)); +#25225 = VECTOR('',#25226,1.); +#25226 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25227 = PLANE('',#25228); +#25228 = AXIS2_PLACEMENT_3D('',#25229,#25230,#25231); +#25229 = CARTESIAN_POINT('',(0.1,-35.56,3.911477598424)); +#25230 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25231 = DIRECTION('',(0.,0.,1.)); +#25232 = ADVANCED_FACE('',(#25233),#25244,.T.); +#25233 = FACE_BOUND('',#25234,.T.); +#25234 = EDGE_LOOP('',(#25235,#25241,#25242,#25243)); +#25235 = ORIENTED_EDGE('',*,*,#25236,.F.); +#25236 = EDGE_CURVE('',#21611,#21635,#25237,.T.); +#25237 = LINE('',#25238,#25239); +#25238 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#25239 = VECTOR('',#25240,1.); +#25240 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25241 = ORIENTED_EDGE('',*,*,#21618,.T.); +#25242 = ORIENTED_EDGE('',*,*,#21626,.T.); +#25243 = ORIENTED_EDGE('',*,*,#21634,.T.); +#25244 = PLANE('',#25245); +#25245 = AXIS2_PLACEMENT_3D('',#25246,#25247,#25248); +#25246 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#25247 = DIRECTION('',(0.,-0.,-1.)); +#25248 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25249 = ADVANCED_FACE('',(#25250),#25291,.T.); +#25250 = FACE_BOUND('',#25251,.T.); +#25251 = EDGE_LOOP('',(#25252,#25260,#25261,#25269,#25277,#25285)); +#25252 = ORIENTED_EDGE('',*,*,#25253,.T.); +#25253 = EDGE_CURVE('',#25254,#21603,#25256,.T.); +#25254 = VERTEX_POINT('',#25255); +#25255 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#25256 = LINE('',#25257,#25258); +#25257 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#25258 = VECTOR('',#25259,1.); +#25259 = DIRECTION('',(0.,0.,1.)); +#25260 = ORIENTED_EDGE('',*,*,#21610,.F.); +#25261 = ORIENTED_EDGE('',*,*,#25262,.T.); +#25262 = EDGE_CURVE('',#21611,#25263,#25265,.T.); +#25263 = VERTEX_POINT('',#25264); +#25264 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#25265 = LINE('',#25266,#25267); +#25266 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#25267 = VECTOR('',#25268,1.); +#25268 = DIRECTION('',(0.,0.,-1.)); +#25269 = ORIENTED_EDGE('',*,*,#25270,.T.); +#25270 = EDGE_CURVE('',#25263,#25271,#25273,.T.); +#25271 = VERTEX_POINT('',#25272); +#25272 = CARTESIAN_POINT('',(-0.1,-35.41,-3.1)); +#25273 = LINE('',#25274,#25275); +#25274 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#25275 = VECTOR('',#25276,1.); +#25276 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25277 = ORIENTED_EDGE('',*,*,#25278,.F.); +#25278 = EDGE_CURVE('',#25279,#25271,#25281,.T.); +#25279 = VERTEX_POINT('',#25280); +#25280 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#25281 = LINE('',#25282,#25283); +#25282 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#25283 = VECTOR('',#25284,1.); +#25284 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25285 = ORIENTED_EDGE('',*,*,#25286,.T.); +#25286 = EDGE_CURVE('',#25279,#25254,#25287,.T.); +#25287 = LINE('',#25288,#25289); +#25288 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#25289 = VECTOR('',#25290,1.); +#25290 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25291 = PLANE('',#25292); +#25292 = AXIS2_PLACEMENT_3D('',#25293,#25294,#25295); +#25293 = CARTESIAN_POINT('',(-0.1,-35.56,3.911477598424)); +#25294 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25295 = DIRECTION('',(0.,0.,1.)); +#25296 = ADVANCED_FACE('',(#25297),#25308,.T.); +#25297 = FACE_BOUND('',#25298,.T.); +#25298 = EDGE_LOOP('',(#25299,#25300,#25301,#25307)); +#25299 = ORIENTED_EDGE('',*,*,#21658,.F.); +#25300 = ORIENTED_EDGE('',*,*,#21668,.T.); +#25301 = ORIENTED_EDGE('',*,*,#25302,.T.); +#25302 = EDGE_CURVE('',#21669,#21709,#25303,.T.); +#25303 = LINE('',#25304,#25305); +#25304 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#25305 = VECTOR('',#25306,1.); +#25306 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25307 = ORIENTED_EDGE('',*,*,#21716,.T.); +#25308 = PLANE('',#25309); +#25309 = AXIS2_PLACEMENT_3D('',#25310,#25311,#25312); +#25310 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#25311 = DIRECTION('',(0.,-0.,-1.)); +#25312 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25313 = ADVANCED_FACE('',(#25314),#25355,.F.); +#25314 = FACE_BOUND('',#25315,.F.); +#25315 = EDGE_LOOP('',(#25316,#25324,#25325,#25333,#25341,#25349)); +#25316 = ORIENTED_EDGE('',*,*,#25317,.T.); +#25317 = EDGE_CURVE('',#25318,#21709,#25320,.T.); +#25318 = VERTEX_POINT('',#25319); +#25319 = CARTESIAN_POINT('',(0.1,-33.32,-2.5)); +#25320 = LINE('',#25321,#25322); +#25321 = CARTESIAN_POINT('',(0.1,-33.32,-2.5)); +#25322 = VECTOR('',#25323,1.); +#25323 = DIRECTION('',(0.,0.,1.)); +#25324 = ORIENTED_EDGE('',*,*,#21708,.F.); +#25325 = ORIENTED_EDGE('',*,*,#25326,.T.); +#25326 = EDGE_CURVE('',#21701,#25327,#25329,.T.); +#25327 = VERTEX_POINT('',#25328); +#25328 = CARTESIAN_POINT('',(0.1,-32.72,-2.5)); +#25329 = LINE('',#25330,#25331); +#25330 = CARTESIAN_POINT('',(0.1,-32.72,0.2)); +#25331 = VECTOR('',#25332,1.); +#25332 = DIRECTION('',(0.,0.,-1.)); +#25333 = ORIENTED_EDGE('',*,*,#25334,.T.); +#25334 = EDGE_CURVE('',#25327,#25335,#25337,.T.); +#25335 = VERTEX_POINT('',#25336); +#25336 = CARTESIAN_POINT('',(0.1,-32.87,-3.1)); +#25337 = LINE('',#25338,#25339); +#25338 = CARTESIAN_POINT('',(0.1,-32.72,-2.5)); +#25339 = VECTOR('',#25340,1.); +#25340 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25341 = ORIENTED_EDGE('',*,*,#25342,.T.); +#25342 = EDGE_CURVE('',#25335,#25343,#25345,.T.); +#25343 = VERTEX_POINT('',#25344); +#25344 = CARTESIAN_POINT('',(0.1,-33.17,-3.1)); +#25345 = LINE('',#25346,#25347); +#25346 = CARTESIAN_POINT('',(0.1,-32.87,-3.1)); +#25347 = VECTOR('',#25348,1.); +#25348 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25349 = ORIENTED_EDGE('',*,*,#25350,.T.); +#25350 = EDGE_CURVE('',#25343,#25318,#25351,.T.); +#25351 = LINE('',#25352,#25353); +#25352 = CARTESIAN_POINT('',(0.1,-33.17,-3.1)); +#25353 = VECTOR('',#25354,1.); +#25354 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25355 = PLANE('',#25356); +#25356 = AXIS2_PLACEMENT_3D('',#25357,#25358,#25359); +#25357 = CARTESIAN_POINT('',(0.1,-33.02,3.911477598424)); +#25358 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25359 = DIRECTION('',(0.,0.,1.)); +#25360 = ADVANCED_FACE('',(#25361),#25372,.T.); +#25361 = FACE_BOUND('',#25362,.T.); +#25362 = EDGE_LOOP('',(#25363,#25369,#25370,#25371)); +#25363 = ORIENTED_EDGE('',*,*,#25364,.F.); +#25364 = EDGE_CURVE('',#21677,#21701,#25365,.T.); +#25365 = LINE('',#25366,#25367); +#25366 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#25367 = VECTOR('',#25368,1.); +#25368 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25369 = ORIENTED_EDGE('',*,*,#21684,.T.); +#25370 = ORIENTED_EDGE('',*,*,#21692,.T.); +#25371 = ORIENTED_EDGE('',*,*,#21700,.T.); +#25372 = PLANE('',#25373); +#25373 = AXIS2_PLACEMENT_3D('',#25374,#25375,#25376); +#25374 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#25375 = DIRECTION('',(0.,-0.,-1.)); +#25376 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25377 = ADVANCED_FACE('',(#25378),#25419,.T.); +#25378 = FACE_BOUND('',#25379,.T.); +#25379 = EDGE_LOOP('',(#25380,#25388,#25389,#25397,#25405,#25413)); +#25380 = ORIENTED_EDGE('',*,*,#25381,.T.); +#25381 = EDGE_CURVE('',#25382,#21669,#25384,.T.); +#25382 = VERTEX_POINT('',#25383); +#25383 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#25384 = LINE('',#25385,#25386); +#25385 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#25386 = VECTOR('',#25387,1.); +#25387 = DIRECTION('',(0.,0.,1.)); +#25388 = ORIENTED_EDGE('',*,*,#21676,.F.); +#25389 = ORIENTED_EDGE('',*,*,#25390,.T.); +#25390 = EDGE_CURVE('',#21677,#25391,#25393,.T.); +#25391 = VERTEX_POINT('',#25392); +#25392 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#25393 = LINE('',#25394,#25395); +#25394 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#25395 = VECTOR('',#25396,1.); +#25396 = DIRECTION('',(0.,0.,-1.)); +#25397 = ORIENTED_EDGE('',*,*,#25398,.T.); +#25398 = EDGE_CURVE('',#25391,#25399,#25401,.T.); +#25399 = VERTEX_POINT('',#25400); +#25400 = CARTESIAN_POINT('',(-0.1,-32.87,-3.1)); +#25401 = LINE('',#25402,#25403); +#25402 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#25403 = VECTOR('',#25404,1.); +#25404 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25405 = ORIENTED_EDGE('',*,*,#25406,.F.); +#25406 = EDGE_CURVE('',#25407,#25399,#25409,.T.); +#25407 = VERTEX_POINT('',#25408); +#25408 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#25409 = LINE('',#25410,#25411); +#25410 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#25411 = VECTOR('',#25412,1.); +#25412 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25413 = ORIENTED_EDGE('',*,*,#25414,.T.); +#25414 = EDGE_CURVE('',#25407,#25382,#25415,.T.); +#25415 = LINE('',#25416,#25417); +#25416 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#25417 = VECTOR('',#25418,1.); +#25418 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25419 = PLANE('',#25420); +#25420 = AXIS2_PLACEMENT_3D('',#25421,#25422,#25423); +#25421 = CARTESIAN_POINT('',(-0.1,-33.02,3.911477598424)); +#25422 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25423 = DIRECTION('',(0.,0.,1.)); +#25424 = ADVANCED_FACE('',(#25425),#25436,.T.); +#25425 = FACE_BOUND('',#25426,.T.); +#25426 = EDGE_LOOP('',(#25427,#25428,#25429,#25435)); +#25427 = ORIENTED_EDGE('',*,*,#21724,.F.); +#25428 = ORIENTED_EDGE('',*,*,#21734,.T.); +#25429 = ORIENTED_EDGE('',*,*,#25430,.T.); +#25430 = EDGE_CURVE('',#21735,#21775,#25431,.T.); +#25431 = LINE('',#25432,#25433); +#25432 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#25433 = VECTOR('',#25434,1.); +#25434 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25435 = ORIENTED_EDGE('',*,*,#21782,.T.); +#25436 = PLANE('',#25437); +#25437 = AXIS2_PLACEMENT_3D('',#25438,#25439,#25440); +#25438 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#25439 = DIRECTION('',(0.,-0.,-1.)); +#25440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25441 = ADVANCED_FACE('',(#25442),#25483,.F.); +#25442 = FACE_BOUND('',#25443,.F.); +#25443 = EDGE_LOOP('',(#25444,#25452,#25453,#25461,#25469,#25477)); +#25444 = ORIENTED_EDGE('',*,*,#25445,.T.); +#25445 = EDGE_CURVE('',#25446,#21775,#25448,.T.); +#25446 = VERTEX_POINT('',#25447); +#25447 = CARTESIAN_POINT('',(0.1,-30.78,-2.5)); +#25448 = LINE('',#25449,#25450); +#25449 = CARTESIAN_POINT('',(0.1,-30.78,-2.5)); +#25450 = VECTOR('',#25451,1.); +#25451 = DIRECTION('',(0.,0.,1.)); +#25452 = ORIENTED_EDGE('',*,*,#21774,.F.); +#25453 = ORIENTED_EDGE('',*,*,#25454,.T.); +#25454 = EDGE_CURVE('',#21767,#25455,#25457,.T.); +#25455 = VERTEX_POINT('',#25456); +#25456 = CARTESIAN_POINT('',(0.1,-30.18,-2.5)); +#25457 = LINE('',#25458,#25459); +#25458 = CARTESIAN_POINT('',(0.1,-30.18,0.2)); +#25459 = VECTOR('',#25460,1.); +#25460 = DIRECTION('',(0.,0.,-1.)); +#25461 = ORIENTED_EDGE('',*,*,#25462,.T.); +#25462 = EDGE_CURVE('',#25455,#25463,#25465,.T.); +#25463 = VERTEX_POINT('',#25464); +#25464 = CARTESIAN_POINT('',(0.1,-30.33,-3.1)); +#25465 = LINE('',#25466,#25467); +#25466 = CARTESIAN_POINT('',(0.1,-30.18,-2.5)); +#25467 = VECTOR('',#25468,1.); +#25468 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25469 = ORIENTED_EDGE('',*,*,#25470,.T.); +#25470 = EDGE_CURVE('',#25463,#25471,#25473,.T.); +#25471 = VERTEX_POINT('',#25472); +#25472 = CARTESIAN_POINT('',(0.1,-30.63,-3.1)); +#25473 = LINE('',#25474,#25475); +#25474 = CARTESIAN_POINT('',(0.1,-30.33,-3.1)); +#25475 = VECTOR('',#25476,1.); +#25476 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25477 = ORIENTED_EDGE('',*,*,#25478,.T.); +#25478 = EDGE_CURVE('',#25471,#25446,#25479,.T.); +#25479 = LINE('',#25480,#25481); +#25480 = CARTESIAN_POINT('',(0.1,-30.63,-3.1)); +#25481 = VECTOR('',#25482,1.); +#25482 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25483 = PLANE('',#25484); +#25484 = AXIS2_PLACEMENT_3D('',#25485,#25486,#25487); +#25485 = CARTESIAN_POINT('',(0.1,-30.48,3.911477598424)); +#25486 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25487 = DIRECTION('',(0.,0.,1.)); +#25488 = ADVANCED_FACE('',(#25489),#25500,.T.); +#25489 = FACE_BOUND('',#25490,.T.); +#25490 = EDGE_LOOP('',(#25491,#25497,#25498,#25499)); +#25491 = ORIENTED_EDGE('',*,*,#25492,.F.); +#25492 = EDGE_CURVE('',#21743,#21767,#25493,.T.); +#25493 = LINE('',#25494,#25495); +#25494 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#25495 = VECTOR('',#25496,1.); +#25496 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25497 = ORIENTED_EDGE('',*,*,#21750,.T.); +#25498 = ORIENTED_EDGE('',*,*,#21758,.T.); +#25499 = ORIENTED_EDGE('',*,*,#21766,.T.); +#25500 = PLANE('',#25501); +#25501 = AXIS2_PLACEMENT_3D('',#25502,#25503,#25504); +#25502 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#25503 = DIRECTION('',(0.,-0.,-1.)); +#25504 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25505 = ADVANCED_FACE('',(#25506),#25547,.T.); +#25506 = FACE_BOUND('',#25507,.T.); +#25507 = EDGE_LOOP('',(#25508,#25516,#25517,#25525,#25533,#25541)); +#25508 = ORIENTED_EDGE('',*,*,#25509,.T.); +#25509 = EDGE_CURVE('',#25510,#21735,#25512,.T.); +#25510 = VERTEX_POINT('',#25511); +#25511 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#25512 = LINE('',#25513,#25514); +#25513 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#25514 = VECTOR('',#25515,1.); +#25515 = DIRECTION('',(0.,0.,1.)); +#25516 = ORIENTED_EDGE('',*,*,#21742,.F.); +#25517 = ORIENTED_EDGE('',*,*,#25518,.T.); +#25518 = EDGE_CURVE('',#21743,#25519,#25521,.T.); +#25519 = VERTEX_POINT('',#25520); +#25520 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#25521 = LINE('',#25522,#25523); +#25522 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#25523 = VECTOR('',#25524,1.); +#25524 = DIRECTION('',(0.,0.,-1.)); +#25525 = ORIENTED_EDGE('',*,*,#25526,.T.); +#25526 = EDGE_CURVE('',#25519,#25527,#25529,.T.); +#25527 = VERTEX_POINT('',#25528); +#25528 = CARTESIAN_POINT('',(-0.1,-30.33,-3.1)); +#25529 = LINE('',#25530,#25531); +#25530 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#25531 = VECTOR('',#25532,1.); +#25532 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25533 = ORIENTED_EDGE('',*,*,#25534,.F.); +#25534 = EDGE_CURVE('',#25535,#25527,#25537,.T.); +#25535 = VERTEX_POINT('',#25536); +#25536 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#25537 = LINE('',#25538,#25539); +#25538 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#25539 = VECTOR('',#25540,1.); +#25540 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25541 = ORIENTED_EDGE('',*,*,#25542,.T.); +#25542 = EDGE_CURVE('',#25535,#25510,#25543,.T.); +#25543 = LINE('',#25544,#25545); +#25544 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#25545 = VECTOR('',#25546,1.); +#25546 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25547 = PLANE('',#25548); +#25548 = AXIS2_PLACEMENT_3D('',#25549,#25550,#25551); +#25549 = CARTESIAN_POINT('',(-0.1,-30.48,3.911477598424)); +#25550 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25551 = DIRECTION('',(0.,0.,1.)); +#25552 = ADVANCED_FACE('',(#25553),#25564,.T.); +#25553 = FACE_BOUND('',#25554,.T.); +#25554 = EDGE_LOOP('',(#25555,#25556,#25557,#25563)); +#25555 = ORIENTED_EDGE('',*,*,#21790,.F.); +#25556 = ORIENTED_EDGE('',*,*,#21800,.T.); +#25557 = ORIENTED_EDGE('',*,*,#25558,.T.); +#25558 = EDGE_CURVE('',#21801,#21841,#25559,.T.); +#25559 = LINE('',#25560,#25561); +#25560 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#25561 = VECTOR('',#25562,1.); +#25562 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25563 = ORIENTED_EDGE('',*,*,#21848,.T.); +#25564 = PLANE('',#25565); +#25565 = AXIS2_PLACEMENT_3D('',#25566,#25567,#25568); +#25566 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#25567 = DIRECTION('',(0.,-0.,-1.)); +#25568 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25569 = ADVANCED_FACE('',(#25570),#25611,.F.); +#25570 = FACE_BOUND('',#25571,.F.); +#25571 = EDGE_LOOP('',(#25572,#25580,#25581,#25589,#25597,#25605)); +#25572 = ORIENTED_EDGE('',*,*,#25573,.T.); +#25573 = EDGE_CURVE('',#25574,#21841,#25576,.T.); +#25574 = VERTEX_POINT('',#25575); +#25575 = CARTESIAN_POINT('',(0.1,-28.24,-2.5)); +#25576 = LINE('',#25577,#25578); +#25577 = CARTESIAN_POINT('',(0.1,-28.24,-2.5)); +#25578 = VECTOR('',#25579,1.); +#25579 = DIRECTION('',(0.,0.,1.)); +#25580 = ORIENTED_EDGE('',*,*,#21840,.F.); +#25581 = ORIENTED_EDGE('',*,*,#25582,.T.); +#25582 = EDGE_CURVE('',#21833,#25583,#25585,.T.); +#25583 = VERTEX_POINT('',#25584); +#25584 = CARTESIAN_POINT('',(0.1,-27.64,-2.5)); +#25585 = LINE('',#25586,#25587); +#25586 = CARTESIAN_POINT('',(0.1,-27.64,0.2)); +#25587 = VECTOR('',#25588,1.); +#25588 = DIRECTION('',(0.,0.,-1.)); +#25589 = ORIENTED_EDGE('',*,*,#25590,.T.); +#25590 = EDGE_CURVE('',#25583,#25591,#25593,.T.); +#25591 = VERTEX_POINT('',#25592); +#25592 = CARTESIAN_POINT('',(0.1,-27.79,-3.1)); +#25593 = LINE('',#25594,#25595); +#25594 = CARTESIAN_POINT('',(0.1,-27.64,-2.5)); +#25595 = VECTOR('',#25596,1.); +#25596 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25597 = ORIENTED_EDGE('',*,*,#25598,.T.); +#25598 = EDGE_CURVE('',#25591,#25599,#25601,.T.); +#25599 = VERTEX_POINT('',#25600); +#25600 = CARTESIAN_POINT('',(0.1,-28.09,-3.1)); +#25601 = LINE('',#25602,#25603); +#25602 = CARTESIAN_POINT('',(0.1,-27.79,-3.1)); +#25603 = VECTOR('',#25604,1.); +#25604 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25605 = ORIENTED_EDGE('',*,*,#25606,.T.); +#25606 = EDGE_CURVE('',#25599,#25574,#25607,.T.); +#25607 = LINE('',#25608,#25609); +#25608 = CARTESIAN_POINT('',(0.1,-28.09,-3.1)); +#25609 = VECTOR('',#25610,1.); +#25610 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25611 = PLANE('',#25612); +#25612 = AXIS2_PLACEMENT_3D('',#25613,#25614,#25615); +#25613 = CARTESIAN_POINT('',(0.1,-27.94,3.911477598424)); +#25614 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25615 = DIRECTION('',(0.,0.,1.)); +#25616 = ADVANCED_FACE('',(#25617),#25628,.T.); +#25617 = FACE_BOUND('',#25618,.T.); +#25618 = EDGE_LOOP('',(#25619,#25625,#25626,#25627)); +#25619 = ORIENTED_EDGE('',*,*,#25620,.F.); +#25620 = EDGE_CURVE('',#21809,#21833,#25621,.T.); +#25621 = LINE('',#25622,#25623); +#25622 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#25623 = VECTOR('',#25624,1.); +#25624 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25625 = ORIENTED_EDGE('',*,*,#21816,.T.); +#25626 = ORIENTED_EDGE('',*,*,#21824,.T.); +#25627 = ORIENTED_EDGE('',*,*,#21832,.T.); +#25628 = PLANE('',#25629); +#25629 = AXIS2_PLACEMENT_3D('',#25630,#25631,#25632); +#25630 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#25631 = DIRECTION('',(0.,-0.,-1.)); +#25632 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25633 = ADVANCED_FACE('',(#25634),#25675,.T.); +#25634 = FACE_BOUND('',#25635,.T.); +#25635 = EDGE_LOOP('',(#25636,#25644,#25645,#25653,#25661,#25669)); +#25636 = ORIENTED_EDGE('',*,*,#25637,.T.); +#25637 = EDGE_CURVE('',#25638,#21801,#25640,.T.); +#25638 = VERTEX_POINT('',#25639); +#25639 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#25640 = LINE('',#25641,#25642); +#25641 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#25642 = VECTOR('',#25643,1.); +#25643 = DIRECTION('',(0.,0.,1.)); +#25644 = ORIENTED_EDGE('',*,*,#21808,.F.); +#25645 = ORIENTED_EDGE('',*,*,#25646,.T.); +#25646 = EDGE_CURVE('',#21809,#25647,#25649,.T.); +#25647 = VERTEX_POINT('',#25648); +#25648 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#25649 = LINE('',#25650,#25651); +#25650 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#25651 = VECTOR('',#25652,1.); +#25652 = DIRECTION('',(0.,0.,-1.)); +#25653 = ORIENTED_EDGE('',*,*,#25654,.T.); +#25654 = EDGE_CURVE('',#25647,#25655,#25657,.T.); +#25655 = VERTEX_POINT('',#25656); +#25656 = CARTESIAN_POINT('',(-0.1,-27.79,-3.1)); +#25657 = LINE('',#25658,#25659); +#25658 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#25659 = VECTOR('',#25660,1.); +#25660 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25661 = ORIENTED_EDGE('',*,*,#25662,.F.); +#25662 = EDGE_CURVE('',#25663,#25655,#25665,.T.); +#25663 = VERTEX_POINT('',#25664); +#25664 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#25665 = LINE('',#25666,#25667); +#25666 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#25667 = VECTOR('',#25668,1.); +#25668 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25669 = ORIENTED_EDGE('',*,*,#25670,.T.); +#25670 = EDGE_CURVE('',#25663,#25638,#25671,.T.); +#25671 = LINE('',#25672,#25673); +#25672 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#25673 = VECTOR('',#25674,1.); +#25674 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25675 = PLANE('',#25676); +#25676 = AXIS2_PLACEMENT_3D('',#25677,#25678,#25679); +#25677 = CARTESIAN_POINT('',(-0.1,-27.94,3.911477598424)); +#25678 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25679 = DIRECTION('',(0.,0.,1.)); +#25680 = ADVANCED_FACE('',(#25681),#25692,.T.); +#25681 = FACE_BOUND('',#25682,.T.); +#25682 = EDGE_LOOP('',(#25683,#25684,#25685,#25691)); +#25683 = ORIENTED_EDGE('',*,*,#21856,.F.); +#25684 = ORIENTED_EDGE('',*,*,#21866,.T.); +#25685 = ORIENTED_EDGE('',*,*,#25686,.T.); +#25686 = EDGE_CURVE('',#21867,#21907,#25687,.T.); +#25687 = LINE('',#25688,#25689); +#25688 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#25689 = VECTOR('',#25690,1.); +#25690 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25691 = ORIENTED_EDGE('',*,*,#21914,.T.); +#25692 = PLANE('',#25693); +#25693 = AXIS2_PLACEMENT_3D('',#25694,#25695,#25696); +#25694 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#25695 = DIRECTION('',(0.,-0.,-1.)); +#25696 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25697 = ADVANCED_FACE('',(#25698),#25739,.F.); +#25698 = FACE_BOUND('',#25699,.F.); +#25699 = EDGE_LOOP('',(#25700,#25708,#25709,#25717,#25725,#25733)); +#25700 = ORIENTED_EDGE('',*,*,#25701,.T.); +#25701 = EDGE_CURVE('',#25702,#21907,#25704,.T.); +#25702 = VERTEX_POINT('',#25703); +#25703 = CARTESIAN_POINT('',(0.1,-25.7,-2.5)); +#25704 = LINE('',#25705,#25706); +#25705 = CARTESIAN_POINT('',(0.1,-25.7,-2.5)); +#25706 = VECTOR('',#25707,1.); +#25707 = DIRECTION('',(0.,0.,1.)); +#25708 = ORIENTED_EDGE('',*,*,#21906,.F.); +#25709 = ORIENTED_EDGE('',*,*,#25710,.T.); +#25710 = EDGE_CURVE('',#21899,#25711,#25713,.T.); +#25711 = VERTEX_POINT('',#25712); +#25712 = CARTESIAN_POINT('',(0.1,-25.1,-2.5)); +#25713 = LINE('',#25714,#25715); +#25714 = CARTESIAN_POINT('',(0.1,-25.1,0.2)); +#25715 = VECTOR('',#25716,1.); +#25716 = DIRECTION('',(0.,0.,-1.)); +#25717 = ORIENTED_EDGE('',*,*,#25718,.T.); +#25718 = EDGE_CURVE('',#25711,#25719,#25721,.T.); +#25719 = VERTEX_POINT('',#25720); +#25720 = CARTESIAN_POINT('',(0.1,-25.25,-3.1)); +#25721 = LINE('',#25722,#25723); +#25722 = CARTESIAN_POINT('',(0.1,-25.1,-2.5)); +#25723 = VECTOR('',#25724,1.); +#25724 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25725 = ORIENTED_EDGE('',*,*,#25726,.T.); +#25726 = EDGE_CURVE('',#25719,#25727,#25729,.T.); +#25727 = VERTEX_POINT('',#25728); +#25728 = CARTESIAN_POINT('',(0.1,-25.55,-3.1)); +#25729 = LINE('',#25730,#25731); +#25730 = CARTESIAN_POINT('',(0.1,-25.25,-3.1)); +#25731 = VECTOR('',#25732,1.); +#25732 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25733 = ORIENTED_EDGE('',*,*,#25734,.T.); +#25734 = EDGE_CURVE('',#25727,#25702,#25735,.T.); +#25735 = LINE('',#25736,#25737); +#25736 = CARTESIAN_POINT('',(0.1,-25.55,-3.1)); +#25737 = VECTOR('',#25738,1.); +#25738 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25739 = PLANE('',#25740); +#25740 = AXIS2_PLACEMENT_3D('',#25741,#25742,#25743); +#25741 = CARTESIAN_POINT('',(0.1,-25.4,3.911477598424)); +#25742 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25743 = DIRECTION('',(0.,0.,1.)); +#25744 = ADVANCED_FACE('',(#25745),#25756,.T.); +#25745 = FACE_BOUND('',#25746,.T.); +#25746 = EDGE_LOOP('',(#25747,#25753,#25754,#25755)); +#25747 = ORIENTED_EDGE('',*,*,#25748,.F.); +#25748 = EDGE_CURVE('',#21875,#21899,#25749,.T.); +#25749 = LINE('',#25750,#25751); +#25750 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#25751 = VECTOR('',#25752,1.); +#25752 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25753 = ORIENTED_EDGE('',*,*,#21882,.T.); +#25754 = ORIENTED_EDGE('',*,*,#21890,.T.); +#25755 = ORIENTED_EDGE('',*,*,#21898,.T.); +#25756 = PLANE('',#25757); +#25757 = AXIS2_PLACEMENT_3D('',#25758,#25759,#25760); +#25758 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#25759 = DIRECTION('',(0.,-0.,-1.)); +#25760 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25761 = ADVANCED_FACE('',(#25762),#25803,.T.); +#25762 = FACE_BOUND('',#25763,.T.); +#25763 = EDGE_LOOP('',(#25764,#25772,#25773,#25781,#25789,#25797)); +#25764 = ORIENTED_EDGE('',*,*,#25765,.T.); +#25765 = EDGE_CURVE('',#25766,#21867,#25768,.T.); +#25766 = VERTEX_POINT('',#25767); +#25767 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#25768 = LINE('',#25769,#25770); +#25769 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#25770 = VECTOR('',#25771,1.); +#25771 = DIRECTION('',(0.,0.,1.)); +#25772 = ORIENTED_EDGE('',*,*,#21874,.F.); +#25773 = ORIENTED_EDGE('',*,*,#25774,.T.); +#25774 = EDGE_CURVE('',#21875,#25775,#25777,.T.); +#25775 = VERTEX_POINT('',#25776); +#25776 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#25777 = LINE('',#25778,#25779); +#25778 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#25779 = VECTOR('',#25780,1.); +#25780 = DIRECTION('',(0.,0.,-1.)); +#25781 = ORIENTED_EDGE('',*,*,#25782,.T.); +#25782 = EDGE_CURVE('',#25775,#25783,#25785,.T.); +#25783 = VERTEX_POINT('',#25784); +#25784 = CARTESIAN_POINT('',(-0.1,-25.25,-3.1)); +#25785 = LINE('',#25786,#25787); +#25786 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#25787 = VECTOR('',#25788,1.); +#25788 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25789 = ORIENTED_EDGE('',*,*,#25790,.F.); +#25790 = EDGE_CURVE('',#25791,#25783,#25793,.T.); +#25791 = VERTEX_POINT('',#25792); +#25792 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#25793 = LINE('',#25794,#25795); +#25794 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#25795 = VECTOR('',#25796,1.); +#25796 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25797 = ORIENTED_EDGE('',*,*,#25798,.T.); +#25798 = EDGE_CURVE('',#25791,#25766,#25799,.T.); +#25799 = LINE('',#25800,#25801); +#25800 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#25801 = VECTOR('',#25802,1.); +#25802 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25803 = PLANE('',#25804); +#25804 = AXIS2_PLACEMENT_3D('',#25805,#25806,#25807); +#25805 = CARTESIAN_POINT('',(-0.1,-25.4,3.911477598424)); +#25806 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25807 = DIRECTION('',(0.,0.,1.)); +#25808 = ADVANCED_FACE('',(#25809),#25820,.T.); +#25809 = FACE_BOUND('',#25810,.T.); +#25810 = EDGE_LOOP('',(#25811,#25812,#25813,#25819)); +#25811 = ORIENTED_EDGE('',*,*,#21922,.F.); +#25812 = ORIENTED_EDGE('',*,*,#21932,.T.); +#25813 = ORIENTED_EDGE('',*,*,#25814,.T.); +#25814 = EDGE_CURVE('',#21933,#21973,#25815,.T.); +#25815 = LINE('',#25816,#25817); +#25816 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#25817 = VECTOR('',#25818,1.); +#25818 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25819 = ORIENTED_EDGE('',*,*,#21980,.T.); +#25820 = PLANE('',#25821); +#25821 = AXIS2_PLACEMENT_3D('',#25822,#25823,#25824); +#25822 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#25823 = DIRECTION('',(0.,-0.,-1.)); +#25824 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25825 = ADVANCED_FACE('',(#25826),#25867,.F.); +#25826 = FACE_BOUND('',#25827,.F.); +#25827 = EDGE_LOOP('',(#25828,#25836,#25837,#25845,#25853,#25861)); +#25828 = ORIENTED_EDGE('',*,*,#25829,.T.); +#25829 = EDGE_CURVE('',#25830,#21973,#25832,.T.); +#25830 = VERTEX_POINT('',#25831); +#25831 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#25832 = LINE('',#25833,#25834); +#25833 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#25834 = VECTOR('',#25835,1.); +#25835 = DIRECTION('',(0.,0.,1.)); +#25836 = ORIENTED_EDGE('',*,*,#21972,.F.); +#25837 = ORIENTED_EDGE('',*,*,#25838,.T.); +#25838 = EDGE_CURVE('',#21965,#25839,#25841,.T.); +#25839 = VERTEX_POINT('',#25840); +#25840 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#25841 = LINE('',#25842,#25843); +#25842 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#25843 = VECTOR('',#25844,1.); +#25844 = DIRECTION('',(0.,0.,-1.)); +#25845 = ORIENTED_EDGE('',*,*,#25846,.T.); +#25846 = EDGE_CURVE('',#25839,#25847,#25849,.T.); +#25847 = VERTEX_POINT('',#25848); +#25848 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#25849 = LINE('',#25850,#25851); +#25850 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#25851 = VECTOR('',#25852,1.); +#25852 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25853 = ORIENTED_EDGE('',*,*,#25854,.T.); +#25854 = EDGE_CURVE('',#25847,#25855,#25857,.T.); +#25855 = VERTEX_POINT('',#25856); +#25856 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#25857 = LINE('',#25858,#25859); +#25858 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#25859 = VECTOR('',#25860,1.); +#25860 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25861 = ORIENTED_EDGE('',*,*,#25862,.T.); +#25862 = EDGE_CURVE('',#25855,#25830,#25863,.T.); +#25863 = LINE('',#25864,#25865); +#25864 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#25865 = VECTOR('',#25866,1.); +#25866 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25867 = PLANE('',#25868); +#25868 = AXIS2_PLACEMENT_3D('',#25869,#25870,#25871); +#25869 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#25870 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25871 = DIRECTION('',(0.,0.,1.)); +#25872 = ADVANCED_FACE('',(#25873),#25884,.T.); +#25873 = FACE_BOUND('',#25874,.T.); +#25874 = EDGE_LOOP('',(#25875,#25881,#25882,#25883)); +#25875 = ORIENTED_EDGE('',*,*,#25876,.F.); +#25876 = EDGE_CURVE('',#21941,#21965,#25877,.T.); +#25877 = LINE('',#25878,#25879); +#25878 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#25879 = VECTOR('',#25880,1.); +#25880 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25881 = ORIENTED_EDGE('',*,*,#21948,.T.); +#25882 = ORIENTED_EDGE('',*,*,#21956,.T.); +#25883 = ORIENTED_EDGE('',*,*,#21964,.T.); +#25884 = PLANE('',#25885); +#25885 = AXIS2_PLACEMENT_3D('',#25886,#25887,#25888); +#25886 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#25887 = DIRECTION('',(0.,-0.,-1.)); +#25888 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25889 = ADVANCED_FACE('',(#25890),#25931,.T.); +#25890 = FACE_BOUND('',#25891,.T.); +#25891 = EDGE_LOOP('',(#25892,#25900,#25901,#25909,#25917,#25925)); +#25892 = ORIENTED_EDGE('',*,*,#25893,.T.); +#25893 = EDGE_CURVE('',#25894,#21933,#25896,.T.); +#25894 = VERTEX_POINT('',#25895); +#25895 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#25896 = LINE('',#25897,#25898); +#25897 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#25898 = VECTOR('',#25899,1.); +#25899 = DIRECTION('',(0.,0.,1.)); +#25900 = ORIENTED_EDGE('',*,*,#21940,.F.); +#25901 = ORIENTED_EDGE('',*,*,#25902,.T.); +#25902 = EDGE_CURVE('',#21941,#25903,#25905,.T.); +#25903 = VERTEX_POINT('',#25904); +#25904 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#25905 = LINE('',#25906,#25907); +#25906 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#25907 = VECTOR('',#25908,1.); +#25908 = DIRECTION('',(0.,0.,-1.)); +#25909 = ORIENTED_EDGE('',*,*,#25910,.T.); +#25910 = EDGE_CURVE('',#25903,#25911,#25913,.T.); +#25911 = VERTEX_POINT('',#25912); +#25912 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#25913 = LINE('',#25914,#25915); +#25914 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#25915 = VECTOR('',#25916,1.); +#25916 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25917 = ORIENTED_EDGE('',*,*,#25918,.F.); +#25918 = EDGE_CURVE('',#25919,#25911,#25921,.T.); +#25919 = VERTEX_POINT('',#25920); +#25920 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#25921 = LINE('',#25922,#25923); +#25922 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#25923 = VECTOR('',#25924,1.); +#25924 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25925 = ORIENTED_EDGE('',*,*,#25926,.T.); +#25926 = EDGE_CURVE('',#25919,#25894,#25927,.T.); +#25927 = LINE('',#25928,#25929); +#25928 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#25929 = VECTOR('',#25930,1.); +#25930 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25931 = PLANE('',#25932); +#25932 = AXIS2_PLACEMENT_3D('',#25933,#25934,#25935); +#25933 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#25934 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25935 = DIRECTION('',(0.,0.,1.)); +#25936 = ADVANCED_FACE('',(#25937),#25948,.T.); +#25937 = FACE_BOUND('',#25938,.T.); +#25938 = EDGE_LOOP('',(#25939,#25940,#25941,#25947)); +#25939 = ORIENTED_EDGE('',*,*,#21988,.F.); +#25940 = ORIENTED_EDGE('',*,*,#21998,.T.); +#25941 = ORIENTED_EDGE('',*,*,#25942,.T.); +#25942 = EDGE_CURVE('',#21999,#22039,#25943,.T.); +#25943 = LINE('',#25944,#25945); +#25944 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#25945 = VECTOR('',#25946,1.); +#25946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25947 = ORIENTED_EDGE('',*,*,#22046,.T.); +#25948 = PLANE('',#25949); +#25949 = AXIS2_PLACEMENT_3D('',#25950,#25951,#25952); +#25950 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#25951 = DIRECTION('',(0.,-0.,-1.)); +#25952 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25953 = ADVANCED_FACE('',(#25954),#25995,.F.); +#25954 = FACE_BOUND('',#25955,.F.); +#25955 = EDGE_LOOP('',(#25956,#25964,#25965,#25973,#25981,#25989)); +#25956 = ORIENTED_EDGE('',*,*,#25957,.T.); +#25957 = EDGE_CURVE('',#25958,#22039,#25960,.T.); +#25958 = VERTEX_POINT('',#25959); +#25959 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#25960 = LINE('',#25961,#25962); +#25961 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#25962 = VECTOR('',#25963,1.); +#25963 = DIRECTION('',(0.,0.,1.)); +#25964 = ORIENTED_EDGE('',*,*,#22038,.F.); +#25965 = ORIENTED_EDGE('',*,*,#25966,.T.); +#25966 = EDGE_CURVE('',#22031,#25967,#25969,.T.); +#25967 = VERTEX_POINT('',#25968); +#25968 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#25969 = LINE('',#25970,#25971); +#25970 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#25971 = VECTOR('',#25972,1.); +#25972 = DIRECTION('',(0.,0.,-1.)); +#25973 = ORIENTED_EDGE('',*,*,#25974,.T.); +#25974 = EDGE_CURVE('',#25967,#25975,#25977,.T.); +#25975 = VERTEX_POINT('',#25976); +#25976 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#25977 = LINE('',#25978,#25979); +#25978 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#25979 = VECTOR('',#25980,1.); +#25980 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25981 = ORIENTED_EDGE('',*,*,#25982,.T.); +#25982 = EDGE_CURVE('',#25975,#25983,#25985,.T.); +#25983 = VERTEX_POINT('',#25984); +#25984 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#25985 = LINE('',#25986,#25987); +#25986 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#25987 = VECTOR('',#25988,1.); +#25988 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25989 = ORIENTED_EDGE('',*,*,#25990,.T.); +#25990 = EDGE_CURVE('',#25983,#25958,#25991,.T.); +#25991 = LINE('',#25992,#25993); +#25992 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#25993 = VECTOR('',#25994,1.); +#25994 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25995 = PLANE('',#25996); +#25996 = AXIS2_PLACEMENT_3D('',#25997,#25998,#25999); +#25997 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#25998 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25999 = DIRECTION('',(0.,0.,1.)); +#26000 = ADVANCED_FACE('',(#26001),#26012,.T.); +#26001 = FACE_BOUND('',#26002,.T.); +#26002 = EDGE_LOOP('',(#26003,#26009,#26010,#26011)); +#26003 = ORIENTED_EDGE('',*,*,#26004,.F.); +#26004 = EDGE_CURVE('',#22007,#22031,#26005,.T.); +#26005 = LINE('',#26006,#26007); +#26006 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#26007 = VECTOR('',#26008,1.); +#26008 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26009 = ORIENTED_EDGE('',*,*,#22014,.T.); +#26010 = ORIENTED_EDGE('',*,*,#22022,.T.); +#26011 = ORIENTED_EDGE('',*,*,#22030,.T.); +#26012 = PLANE('',#26013); +#26013 = AXIS2_PLACEMENT_3D('',#26014,#26015,#26016); +#26014 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#26015 = DIRECTION('',(0.,-0.,-1.)); +#26016 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26017 = ADVANCED_FACE('',(#26018),#26059,.T.); +#26018 = FACE_BOUND('',#26019,.T.); +#26019 = EDGE_LOOP('',(#26020,#26028,#26029,#26037,#26045,#26053)); +#26020 = ORIENTED_EDGE('',*,*,#26021,.T.); +#26021 = EDGE_CURVE('',#26022,#21999,#26024,.T.); +#26022 = VERTEX_POINT('',#26023); +#26023 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#26024 = LINE('',#26025,#26026); +#26025 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#26026 = VECTOR('',#26027,1.); +#26027 = DIRECTION('',(0.,0.,1.)); +#26028 = ORIENTED_EDGE('',*,*,#22006,.F.); +#26029 = ORIENTED_EDGE('',*,*,#26030,.T.); +#26030 = EDGE_CURVE('',#22007,#26031,#26033,.T.); +#26031 = VERTEX_POINT('',#26032); +#26032 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#26033 = LINE('',#26034,#26035); +#26034 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#26035 = VECTOR('',#26036,1.); +#26036 = DIRECTION('',(0.,0.,-1.)); +#26037 = ORIENTED_EDGE('',*,*,#26038,.T.); +#26038 = EDGE_CURVE('',#26031,#26039,#26041,.T.); +#26039 = VERTEX_POINT('',#26040); +#26040 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#26041 = LINE('',#26042,#26043); +#26042 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#26043 = VECTOR('',#26044,1.); +#26044 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26045 = ORIENTED_EDGE('',*,*,#26046,.F.); +#26046 = EDGE_CURVE('',#26047,#26039,#26049,.T.); +#26047 = VERTEX_POINT('',#26048); +#26048 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#26049 = LINE('',#26050,#26051); +#26050 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#26051 = VECTOR('',#26052,1.); +#26052 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26053 = ORIENTED_EDGE('',*,*,#26054,.T.); +#26054 = EDGE_CURVE('',#26047,#26022,#26055,.T.); +#26055 = LINE('',#26056,#26057); +#26056 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#26057 = VECTOR('',#26058,1.); +#26058 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26059 = PLANE('',#26060); +#26060 = AXIS2_PLACEMENT_3D('',#26061,#26062,#26063); +#26061 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#26062 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26063 = DIRECTION('',(0.,0.,1.)); +#26064 = ADVANCED_FACE('',(#26065),#26076,.T.); +#26065 = FACE_BOUND('',#26066,.T.); +#26066 = EDGE_LOOP('',(#26067,#26068,#26069,#26075)); +#26067 = ORIENTED_EDGE('',*,*,#22054,.F.); +#26068 = ORIENTED_EDGE('',*,*,#22064,.T.); +#26069 = ORIENTED_EDGE('',*,*,#26070,.T.); +#26070 = EDGE_CURVE('',#22065,#22105,#26071,.T.); +#26071 = LINE('',#26072,#26073); +#26072 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#26073 = VECTOR('',#26074,1.); +#26074 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26075 = ORIENTED_EDGE('',*,*,#22112,.T.); +#26076 = PLANE('',#26077); +#26077 = AXIS2_PLACEMENT_3D('',#26078,#26079,#26080); +#26078 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#26079 = DIRECTION('',(0.,-0.,-1.)); +#26080 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26081 = ADVANCED_FACE('',(#26082),#26123,.F.); +#26082 = FACE_BOUND('',#26083,.F.); +#26083 = EDGE_LOOP('',(#26084,#26092,#26093,#26101,#26109,#26117)); +#26084 = ORIENTED_EDGE('',*,*,#26085,.T.); +#26085 = EDGE_CURVE('',#26086,#22105,#26088,.T.); +#26086 = VERTEX_POINT('',#26087); +#26087 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#26088 = LINE('',#26089,#26090); +#26089 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#26090 = VECTOR('',#26091,1.); +#26091 = DIRECTION('',(0.,0.,1.)); +#26092 = ORIENTED_EDGE('',*,*,#22104,.F.); +#26093 = ORIENTED_EDGE('',*,*,#26094,.T.); +#26094 = EDGE_CURVE('',#22097,#26095,#26097,.T.); +#26095 = VERTEX_POINT('',#26096); +#26096 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#26097 = LINE('',#26098,#26099); +#26098 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#26099 = VECTOR('',#26100,1.); +#26100 = DIRECTION('',(0.,0.,-1.)); +#26101 = ORIENTED_EDGE('',*,*,#26102,.T.); +#26102 = EDGE_CURVE('',#26095,#26103,#26105,.T.); +#26103 = VERTEX_POINT('',#26104); +#26104 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#26105 = LINE('',#26106,#26107); +#26106 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#26107 = VECTOR('',#26108,1.); +#26108 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26109 = ORIENTED_EDGE('',*,*,#26110,.T.); +#26110 = EDGE_CURVE('',#26103,#26111,#26113,.T.); +#26111 = VERTEX_POINT('',#26112); +#26112 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#26113 = LINE('',#26114,#26115); +#26114 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#26115 = VECTOR('',#26116,1.); +#26116 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26117 = ORIENTED_EDGE('',*,*,#26118,.T.); +#26118 = EDGE_CURVE('',#26111,#26086,#26119,.T.); +#26119 = LINE('',#26120,#26121); +#26120 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#26121 = VECTOR('',#26122,1.); +#26122 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26123 = PLANE('',#26124); +#26124 = AXIS2_PLACEMENT_3D('',#26125,#26126,#26127); +#26125 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#26126 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26127 = DIRECTION('',(0.,0.,1.)); +#26128 = ADVANCED_FACE('',(#26129),#26140,.T.); +#26129 = FACE_BOUND('',#26130,.T.); +#26130 = EDGE_LOOP('',(#26131,#26137,#26138,#26139)); +#26131 = ORIENTED_EDGE('',*,*,#26132,.F.); +#26132 = EDGE_CURVE('',#22073,#22097,#26133,.T.); +#26133 = LINE('',#26134,#26135); +#26134 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#26135 = VECTOR('',#26136,1.); +#26136 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26137 = ORIENTED_EDGE('',*,*,#22080,.T.); +#26138 = ORIENTED_EDGE('',*,*,#22088,.T.); +#26139 = ORIENTED_EDGE('',*,*,#22096,.T.); +#26140 = PLANE('',#26141); +#26141 = AXIS2_PLACEMENT_3D('',#26142,#26143,#26144); +#26142 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#26143 = DIRECTION('',(0.,-0.,-1.)); +#26144 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26145 = ADVANCED_FACE('',(#26146),#26187,.T.); +#26146 = FACE_BOUND('',#26147,.T.); +#26147 = EDGE_LOOP('',(#26148,#26156,#26157,#26165,#26173,#26181)); +#26148 = ORIENTED_EDGE('',*,*,#26149,.T.); +#26149 = EDGE_CURVE('',#26150,#22065,#26152,.T.); +#26150 = VERTEX_POINT('',#26151); +#26151 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#26152 = LINE('',#26153,#26154); +#26153 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#26154 = VECTOR('',#26155,1.); +#26155 = DIRECTION('',(0.,0.,1.)); +#26156 = ORIENTED_EDGE('',*,*,#22072,.F.); +#26157 = ORIENTED_EDGE('',*,*,#26158,.T.); +#26158 = EDGE_CURVE('',#22073,#26159,#26161,.T.); +#26159 = VERTEX_POINT('',#26160); +#26160 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#26161 = LINE('',#26162,#26163); +#26162 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#26163 = VECTOR('',#26164,1.); +#26164 = DIRECTION('',(0.,0.,-1.)); +#26165 = ORIENTED_EDGE('',*,*,#26166,.T.); +#26166 = EDGE_CURVE('',#26159,#26167,#26169,.T.); +#26167 = VERTEX_POINT('',#26168); +#26168 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#26169 = LINE('',#26170,#26171); +#26170 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#26171 = VECTOR('',#26172,1.); +#26172 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26173 = ORIENTED_EDGE('',*,*,#26174,.F.); +#26174 = EDGE_CURVE('',#26175,#26167,#26177,.T.); +#26175 = VERTEX_POINT('',#26176); +#26176 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#26177 = LINE('',#26178,#26179); +#26178 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#26179 = VECTOR('',#26180,1.); +#26180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26181 = ORIENTED_EDGE('',*,*,#26182,.T.); +#26182 = EDGE_CURVE('',#26175,#26150,#26183,.T.); +#26183 = LINE('',#26184,#26185); +#26184 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#26185 = VECTOR('',#26186,1.); +#26186 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26187 = PLANE('',#26188); +#26188 = AXIS2_PLACEMENT_3D('',#26189,#26190,#26191); +#26189 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#26190 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26191 = DIRECTION('',(0.,0.,1.)); +#26192 = ADVANCED_FACE('',(#26193),#26204,.T.); +#26193 = FACE_BOUND('',#26194,.T.); +#26194 = EDGE_LOOP('',(#26195,#26196,#26197,#26203)); +#26195 = ORIENTED_EDGE('',*,*,#22120,.F.); +#26196 = ORIENTED_EDGE('',*,*,#22130,.T.); +#26197 = ORIENTED_EDGE('',*,*,#26198,.T.); +#26198 = EDGE_CURVE('',#22131,#22171,#26199,.T.); +#26199 = LINE('',#26200,#26201); +#26200 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#26201 = VECTOR('',#26202,1.); +#26202 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26203 = ORIENTED_EDGE('',*,*,#22178,.T.); +#26204 = PLANE('',#26205); +#26205 = AXIS2_PLACEMENT_3D('',#26206,#26207,#26208); +#26206 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#26207 = DIRECTION('',(0.,-0.,-1.)); +#26208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26209 = ADVANCED_FACE('',(#26210),#26251,.F.); +#26210 = FACE_BOUND('',#26211,.F.); +#26211 = EDGE_LOOP('',(#26212,#26220,#26221,#26229,#26237,#26245)); +#26212 = ORIENTED_EDGE('',*,*,#26213,.T.); +#26213 = EDGE_CURVE('',#26214,#22171,#26216,.T.); +#26214 = VERTEX_POINT('',#26215); +#26215 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#26216 = LINE('',#26217,#26218); +#26217 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#26218 = VECTOR('',#26219,1.); +#26219 = DIRECTION('',(0.,0.,1.)); +#26220 = ORIENTED_EDGE('',*,*,#22170,.F.); +#26221 = ORIENTED_EDGE('',*,*,#26222,.T.); +#26222 = EDGE_CURVE('',#22163,#26223,#26225,.T.); +#26223 = VERTEX_POINT('',#26224); +#26224 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#26225 = LINE('',#26226,#26227); +#26226 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#26227 = VECTOR('',#26228,1.); +#26228 = DIRECTION('',(0.,0.,-1.)); +#26229 = ORIENTED_EDGE('',*,*,#26230,.T.); +#26230 = EDGE_CURVE('',#26223,#26231,#26233,.T.); +#26231 = VERTEX_POINT('',#26232); +#26232 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#26233 = LINE('',#26234,#26235); +#26234 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#26235 = VECTOR('',#26236,1.); +#26236 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26237 = ORIENTED_EDGE('',*,*,#26238,.T.); +#26238 = EDGE_CURVE('',#26231,#26239,#26241,.T.); +#26239 = VERTEX_POINT('',#26240); +#26240 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#26241 = LINE('',#26242,#26243); +#26242 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#26243 = VECTOR('',#26244,1.); +#26244 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26245 = ORIENTED_EDGE('',*,*,#26246,.T.); +#26246 = EDGE_CURVE('',#26239,#26214,#26247,.T.); +#26247 = LINE('',#26248,#26249); +#26248 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#26249 = VECTOR('',#26250,1.); +#26250 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26251 = PLANE('',#26252); +#26252 = AXIS2_PLACEMENT_3D('',#26253,#26254,#26255); +#26253 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#26254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26255 = DIRECTION('',(0.,0.,1.)); +#26256 = ADVANCED_FACE('',(#26257),#26268,.T.); +#26257 = FACE_BOUND('',#26258,.T.); +#26258 = EDGE_LOOP('',(#26259,#26265,#26266,#26267)); +#26259 = ORIENTED_EDGE('',*,*,#26260,.F.); +#26260 = EDGE_CURVE('',#22139,#22163,#26261,.T.); +#26261 = LINE('',#26262,#26263); +#26262 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#26263 = VECTOR('',#26264,1.); +#26264 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26265 = ORIENTED_EDGE('',*,*,#22146,.T.); +#26266 = ORIENTED_EDGE('',*,*,#22154,.T.); +#26267 = ORIENTED_EDGE('',*,*,#22162,.T.); +#26268 = PLANE('',#26269); +#26269 = AXIS2_PLACEMENT_3D('',#26270,#26271,#26272); +#26270 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#26271 = DIRECTION('',(0.,-0.,-1.)); +#26272 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26273 = ADVANCED_FACE('',(#26274),#26315,.T.); +#26274 = FACE_BOUND('',#26275,.T.); +#26275 = EDGE_LOOP('',(#26276,#26284,#26285,#26293,#26301,#26309)); +#26276 = ORIENTED_EDGE('',*,*,#26277,.T.); +#26277 = EDGE_CURVE('',#26278,#22131,#26280,.T.); +#26278 = VERTEX_POINT('',#26279); +#26279 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#26280 = LINE('',#26281,#26282); +#26281 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#26282 = VECTOR('',#26283,1.); +#26283 = DIRECTION('',(0.,0.,1.)); +#26284 = ORIENTED_EDGE('',*,*,#22138,.F.); +#26285 = ORIENTED_EDGE('',*,*,#26286,.T.); +#26286 = EDGE_CURVE('',#22139,#26287,#26289,.T.); +#26287 = VERTEX_POINT('',#26288); +#26288 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#26289 = LINE('',#26290,#26291); +#26290 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#26291 = VECTOR('',#26292,1.); +#26292 = DIRECTION('',(0.,0.,-1.)); +#26293 = ORIENTED_EDGE('',*,*,#26294,.T.); +#26294 = EDGE_CURVE('',#26287,#26295,#26297,.T.); +#26295 = VERTEX_POINT('',#26296); +#26296 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#26297 = LINE('',#26298,#26299); +#26298 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#26299 = VECTOR('',#26300,1.); +#26300 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26301 = ORIENTED_EDGE('',*,*,#26302,.F.); +#26302 = EDGE_CURVE('',#26303,#26295,#26305,.T.); +#26303 = VERTEX_POINT('',#26304); +#26304 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#26305 = LINE('',#26306,#26307); +#26306 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#26307 = VECTOR('',#26308,1.); +#26308 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26309 = ORIENTED_EDGE('',*,*,#26310,.T.); +#26310 = EDGE_CURVE('',#26303,#26278,#26311,.T.); +#26311 = LINE('',#26312,#26313); +#26312 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#26313 = VECTOR('',#26314,1.); +#26314 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26315 = PLANE('',#26316); +#26316 = AXIS2_PLACEMENT_3D('',#26317,#26318,#26319); +#26317 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#26318 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26319 = DIRECTION('',(0.,0.,1.)); +#26320 = ADVANCED_FACE('',(#26321),#26332,.T.); +#26321 = FACE_BOUND('',#26322,.T.); +#26322 = EDGE_LOOP('',(#26323,#26324,#26325,#26331)); +#26323 = ORIENTED_EDGE('',*,*,#22186,.F.); +#26324 = ORIENTED_EDGE('',*,*,#22196,.T.); +#26325 = ORIENTED_EDGE('',*,*,#26326,.T.); +#26326 = EDGE_CURVE('',#22197,#22237,#26327,.T.); +#26327 = LINE('',#26328,#26329); +#26328 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#26329 = VECTOR('',#26330,1.); +#26330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26331 = ORIENTED_EDGE('',*,*,#22244,.T.); +#26332 = PLANE('',#26333); +#26333 = AXIS2_PLACEMENT_3D('',#26334,#26335,#26336); +#26334 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#26335 = DIRECTION('',(0.,-0.,-1.)); +#26336 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26337 = ADVANCED_FACE('',(#26338),#26379,.F.); +#26338 = FACE_BOUND('',#26339,.F.); +#26339 = EDGE_LOOP('',(#26340,#26348,#26349,#26357,#26365,#26373)); +#26340 = ORIENTED_EDGE('',*,*,#26341,.T.); +#26341 = EDGE_CURVE('',#26342,#22237,#26344,.T.); +#26342 = VERTEX_POINT('',#26343); +#26343 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#26344 = LINE('',#26345,#26346); +#26345 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#26346 = VECTOR('',#26347,1.); +#26347 = DIRECTION('',(0.,0.,1.)); +#26348 = ORIENTED_EDGE('',*,*,#22236,.F.); +#26349 = ORIENTED_EDGE('',*,*,#26350,.T.); +#26350 = EDGE_CURVE('',#22229,#26351,#26353,.T.); +#26351 = VERTEX_POINT('',#26352); +#26352 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#26353 = LINE('',#26354,#26355); +#26354 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#26355 = VECTOR('',#26356,1.); +#26356 = DIRECTION('',(0.,0.,-1.)); +#26357 = ORIENTED_EDGE('',*,*,#26358,.T.); +#26358 = EDGE_CURVE('',#26351,#26359,#26361,.T.); +#26359 = VERTEX_POINT('',#26360); +#26360 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#26361 = LINE('',#26362,#26363); +#26362 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#26363 = VECTOR('',#26364,1.); +#26364 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26365 = ORIENTED_EDGE('',*,*,#26366,.T.); +#26366 = EDGE_CURVE('',#26359,#26367,#26369,.T.); +#26367 = VERTEX_POINT('',#26368); +#26368 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#26369 = LINE('',#26370,#26371); +#26370 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#26371 = VECTOR('',#26372,1.); +#26372 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26373 = ORIENTED_EDGE('',*,*,#26374,.T.); +#26374 = EDGE_CURVE('',#26367,#26342,#26375,.T.); +#26375 = LINE('',#26376,#26377); +#26376 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#26377 = VECTOR('',#26378,1.); +#26378 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26379 = PLANE('',#26380); +#26380 = AXIS2_PLACEMENT_3D('',#26381,#26382,#26383); +#26381 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#26382 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26383 = DIRECTION('',(0.,0.,1.)); +#26384 = ADVANCED_FACE('',(#26385),#26396,.T.); +#26385 = FACE_BOUND('',#26386,.T.); +#26386 = EDGE_LOOP('',(#26387,#26393,#26394,#26395)); +#26387 = ORIENTED_EDGE('',*,*,#26388,.F.); +#26388 = EDGE_CURVE('',#22205,#22229,#26389,.T.); +#26389 = LINE('',#26390,#26391); +#26390 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#26391 = VECTOR('',#26392,1.); +#26392 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26393 = ORIENTED_EDGE('',*,*,#22212,.T.); +#26394 = ORIENTED_EDGE('',*,*,#22220,.T.); +#26395 = ORIENTED_EDGE('',*,*,#22228,.T.); +#26396 = PLANE('',#26397); +#26397 = AXIS2_PLACEMENT_3D('',#26398,#26399,#26400); +#26398 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#26399 = DIRECTION('',(0.,-0.,-1.)); +#26400 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26401 = ADVANCED_FACE('',(#26402),#26443,.T.); +#26402 = FACE_BOUND('',#26403,.T.); +#26403 = EDGE_LOOP('',(#26404,#26412,#26413,#26421,#26429,#26437)); +#26404 = ORIENTED_EDGE('',*,*,#26405,.T.); +#26405 = EDGE_CURVE('',#26406,#22197,#26408,.T.); +#26406 = VERTEX_POINT('',#26407); +#26407 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#26408 = LINE('',#26409,#26410); +#26409 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#26410 = VECTOR('',#26411,1.); +#26411 = DIRECTION('',(0.,0.,1.)); +#26412 = ORIENTED_EDGE('',*,*,#22204,.F.); +#26413 = ORIENTED_EDGE('',*,*,#26414,.T.); +#26414 = EDGE_CURVE('',#22205,#26415,#26417,.T.); +#26415 = VERTEX_POINT('',#26416); +#26416 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#26417 = LINE('',#26418,#26419); +#26418 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#26419 = VECTOR('',#26420,1.); +#26420 = DIRECTION('',(0.,0.,-1.)); +#26421 = ORIENTED_EDGE('',*,*,#26422,.T.); +#26422 = EDGE_CURVE('',#26415,#26423,#26425,.T.); +#26423 = VERTEX_POINT('',#26424); +#26424 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#26425 = LINE('',#26426,#26427); +#26426 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#26427 = VECTOR('',#26428,1.); +#26428 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26429 = ORIENTED_EDGE('',*,*,#26430,.F.); +#26430 = EDGE_CURVE('',#26431,#26423,#26433,.T.); +#26431 = VERTEX_POINT('',#26432); +#26432 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#26433 = LINE('',#26434,#26435); +#26434 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#26435 = VECTOR('',#26436,1.); +#26436 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26437 = ORIENTED_EDGE('',*,*,#26438,.T.); +#26438 = EDGE_CURVE('',#26431,#26406,#26439,.T.); +#26439 = LINE('',#26440,#26441); +#26440 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#26441 = VECTOR('',#26442,1.); +#26442 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26443 = PLANE('',#26444); +#26444 = AXIS2_PLACEMENT_3D('',#26445,#26446,#26447); +#26445 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#26446 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26447 = DIRECTION('',(0.,0.,1.)); +#26448 = ADVANCED_FACE('',(#26449),#26460,.T.); +#26449 = FACE_BOUND('',#26450,.T.); +#26450 = EDGE_LOOP('',(#26451,#26452,#26453,#26459)); +#26451 = ORIENTED_EDGE('',*,*,#22252,.F.); +#26452 = ORIENTED_EDGE('',*,*,#22262,.T.); +#26453 = ORIENTED_EDGE('',*,*,#26454,.T.); +#26454 = EDGE_CURVE('',#22263,#22303,#26455,.T.); +#26455 = LINE('',#26456,#26457); +#26456 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#26457 = VECTOR('',#26458,1.); +#26458 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26459 = ORIENTED_EDGE('',*,*,#22310,.T.); +#26460 = PLANE('',#26461); +#26461 = AXIS2_PLACEMENT_3D('',#26462,#26463,#26464); +#26462 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#26463 = DIRECTION('',(0.,-0.,-1.)); +#26464 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26465 = ADVANCED_FACE('',(#26466),#26507,.F.); +#26466 = FACE_BOUND('',#26467,.F.); +#26467 = EDGE_LOOP('',(#26468,#26476,#26477,#26485,#26493,#26501)); +#26468 = ORIENTED_EDGE('',*,*,#26469,.T.); +#26469 = EDGE_CURVE('',#26470,#22303,#26472,.T.); +#26470 = VERTEX_POINT('',#26471); +#26471 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#26472 = LINE('',#26473,#26474); +#26473 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#26474 = VECTOR('',#26475,1.); +#26475 = DIRECTION('',(0.,0.,1.)); +#26476 = ORIENTED_EDGE('',*,*,#22302,.F.); +#26477 = ORIENTED_EDGE('',*,*,#26478,.T.); +#26478 = EDGE_CURVE('',#22295,#26479,#26481,.T.); +#26479 = VERTEX_POINT('',#26480); +#26480 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#26481 = LINE('',#26482,#26483); +#26482 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#26483 = VECTOR('',#26484,1.); +#26484 = DIRECTION('',(0.,0.,-1.)); +#26485 = ORIENTED_EDGE('',*,*,#26486,.T.); +#26486 = EDGE_CURVE('',#26479,#26487,#26489,.T.); +#26487 = VERTEX_POINT('',#26488); +#26488 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#26489 = LINE('',#26490,#26491); +#26490 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#26491 = VECTOR('',#26492,1.); +#26492 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26493 = ORIENTED_EDGE('',*,*,#26494,.T.); +#26494 = EDGE_CURVE('',#26487,#26495,#26497,.T.); +#26495 = VERTEX_POINT('',#26496); +#26496 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#26497 = LINE('',#26498,#26499); +#26498 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#26499 = VECTOR('',#26500,1.); +#26500 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26501 = ORIENTED_EDGE('',*,*,#26502,.T.); +#26502 = EDGE_CURVE('',#26495,#26470,#26503,.T.); +#26503 = LINE('',#26504,#26505); +#26504 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#26505 = VECTOR('',#26506,1.); +#26506 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26507 = PLANE('',#26508); +#26508 = AXIS2_PLACEMENT_3D('',#26509,#26510,#26511); +#26509 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#26510 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26511 = DIRECTION('',(0.,0.,1.)); +#26512 = ADVANCED_FACE('',(#26513),#26524,.T.); +#26513 = FACE_BOUND('',#26514,.T.); +#26514 = EDGE_LOOP('',(#26515,#26521,#26522,#26523)); +#26515 = ORIENTED_EDGE('',*,*,#26516,.F.); +#26516 = EDGE_CURVE('',#22271,#22295,#26517,.T.); +#26517 = LINE('',#26518,#26519); +#26518 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#26519 = VECTOR('',#26520,1.); +#26520 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26521 = ORIENTED_EDGE('',*,*,#22278,.T.); +#26522 = ORIENTED_EDGE('',*,*,#22286,.T.); +#26523 = ORIENTED_EDGE('',*,*,#22294,.T.); +#26524 = PLANE('',#26525); +#26525 = AXIS2_PLACEMENT_3D('',#26526,#26527,#26528); +#26526 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#26527 = DIRECTION('',(0.,-0.,-1.)); +#26528 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26529 = ADVANCED_FACE('',(#26530),#26571,.T.); +#26530 = FACE_BOUND('',#26531,.T.); +#26531 = EDGE_LOOP('',(#26532,#26540,#26541,#26549,#26557,#26565)); +#26532 = ORIENTED_EDGE('',*,*,#26533,.T.); +#26533 = EDGE_CURVE('',#26534,#22263,#26536,.T.); +#26534 = VERTEX_POINT('',#26535); +#26535 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#26536 = LINE('',#26537,#26538); +#26537 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#26538 = VECTOR('',#26539,1.); +#26539 = DIRECTION('',(0.,0.,1.)); +#26540 = ORIENTED_EDGE('',*,*,#22270,.F.); +#26541 = ORIENTED_EDGE('',*,*,#26542,.T.); +#26542 = EDGE_CURVE('',#22271,#26543,#26545,.T.); +#26543 = VERTEX_POINT('',#26544); +#26544 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#26545 = LINE('',#26546,#26547); +#26546 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#26547 = VECTOR('',#26548,1.); +#26548 = DIRECTION('',(0.,0.,-1.)); +#26549 = ORIENTED_EDGE('',*,*,#26550,.T.); +#26550 = EDGE_CURVE('',#26543,#26551,#26553,.T.); +#26551 = VERTEX_POINT('',#26552); +#26552 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#26553 = LINE('',#26554,#26555); +#26554 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#26555 = VECTOR('',#26556,1.); +#26556 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26557 = ORIENTED_EDGE('',*,*,#26558,.F.); +#26558 = EDGE_CURVE('',#26559,#26551,#26561,.T.); +#26559 = VERTEX_POINT('',#26560); +#26560 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#26561 = LINE('',#26562,#26563); +#26562 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#26563 = VECTOR('',#26564,1.); +#26564 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26565 = ORIENTED_EDGE('',*,*,#26566,.T.); +#26566 = EDGE_CURVE('',#26559,#26534,#26567,.T.); +#26567 = LINE('',#26568,#26569); +#26568 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#26569 = VECTOR('',#26570,1.); +#26570 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26571 = PLANE('',#26572); +#26572 = AXIS2_PLACEMENT_3D('',#26573,#26574,#26575); +#26573 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#26574 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26575 = DIRECTION('',(0.,0.,1.)); +#26576 = ADVANCED_FACE('',(#26577),#26588,.T.); +#26577 = FACE_BOUND('',#26578,.T.); +#26578 = EDGE_LOOP('',(#26579,#26580,#26581,#26587)); +#26579 = ORIENTED_EDGE('',*,*,#22318,.F.); +#26580 = ORIENTED_EDGE('',*,*,#22328,.T.); +#26581 = ORIENTED_EDGE('',*,*,#26582,.T.); +#26582 = EDGE_CURVE('',#22329,#22369,#26583,.T.); +#26583 = LINE('',#26584,#26585); +#26584 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#26585 = VECTOR('',#26586,1.); +#26586 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26587 = ORIENTED_EDGE('',*,*,#22376,.T.); +#26588 = PLANE('',#26589); +#26589 = AXIS2_PLACEMENT_3D('',#26590,#26591,#26592); +#26590 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#26591 = DIRECTION('',(0.,-0.,-1.)); +#26592 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26593 = ADVANCED_FACE('',(#26594),#26635,.F.); +#26594 = FACE_BOUND('',#26595,.F.); +#26595 = EDGE_LOOP('',(#26596,#26604,#26605,#26613,#26621,#26629)); +#26596 = ORIENTED_EDGE('',*,*,#26597,.T.); +#26597 = EDGE_CURVE('',#26598,#22369,#26600,.T.); +#26598 = VERTEX_POINT('',#26599); +#26599 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#26600 = LINE('',#26601,#26602); +#26601 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#26602 = VECTOR('',#26603,1.); +#26603 = DIRECTION('',(0.,0.,1.)); +#26604 = ORIENTED_EDGE('',*,*,#22368,.F.); +#26605 = ORIENTED_EDGE('',*,*,#26606,.T.); +#26606 = EDGE_CURVE('',#22361,#26607,#26609,.T.); +#26607 = VERTEX_POINT('',#26608); +#26608 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#26609 = LINE('',#26610,#26611); +#26610 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#26611 = VECTOR('',#26612,1.); +#26612 = DIRECTION('',(0.,0.,-1.)); +#26613 = ORIENTED_EDGE('',*,*,#26614,.T.); +#26614 = EDGE_CURVE('',#26607,#26615,#26617,.T.); +#26615 = VERTEX_POINT('',#26616); +#26616 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#26617 = LINE('',#26618,#26619); +#26618 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#26619 = VECTOR('',#26620,1.); +#26620 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26621 = ORIENTED_EDGE('',*,*,#26622,.T.); +#26622 = EDGE_CURVE('',#26615,#26623,#26625,.T.); +#26623 = VERTEX_POINT('',#26624); +#26624 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#26625 = LINE('',#26626,#26627); +#26626 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#26627 = VECTOR('',#26628,1.); +#26628 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26629 = ORIENTED_EDGE('',*,*,#26630,.T.); +#26630 = EDGE_CURVE('',#26623,#26598,#26631,.T.); +#26631 = LINE('',#26632,#26633); +#26632 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#26633 = VECTOR('',#26634,1.); +#26634 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26635 = PLANE('',#26636); +#26636 = AXIS2_PLACEMENT_3D('',#26637,#26638,#26639); +#26637 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#26638 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26639 = DIRECTION('',(0.,0.,1.)); +#26640 = ADVANCED_FACE('',(#26641),#26652,.T.); +#26641 = FACE_BOUND('',#26642,.T.); +#26642 = EDGE_LOOP('',(#26643,#26649,#26650,#26651)); +#26643 = ORIENTED_EDGE('',*,*,#26644,.F.); +#26644 = EDGE_CURVE('',#22337,#22361,#26645,.T.); +#26645 = LINE('',#26646,#26647); +#26646 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#26647 = VECTOR('',#26648,1.); +#26648 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26649 = ORIENTED_EDGE('',*,*,#22344,.T.); +#26650 = ORIENTED_EDGE('',*,*,#22352,.T.); +#26651 = ORIENTED_EDGE('',*,*,#22360,.T.); +#26652 = PLANE('',#26653); +#26653 = AXIS2_PLACEMENT_3D('',#26654,#26655,#26656); +#26654 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#26655 = DIRECTION('',(0.,-0.,-1.)); +#26656 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26657 = ADVANCED_FACE('',(#26658),#26699,.T.); +#26658 = FACE_BOUND('',#26659,.T.); +#26659 = EDGE_LOOP('',(#26660,#26668,#26669,#26677,#26685,#26693)); +#26660 = ORIENTED_EDGE('',*,*,#26661,.T.); +#26661 = EDGE_CURVE('',#26662,#22329,#26664,.T.); +#26662 = VERTEX_POINT('',#26663); +#26663 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#26664 = LINE('',#26665,#26666); +#26665 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#26666 = VECTOR('',#26667,1.); +#26667 = DIRECTION('',(0.,0.,1.)); +#26668 = ORIENTED_EDGE('',*,*,#22336,.F.); +#26669 = ORIENTED_EDGE('',*,*,#26670,.T.); +#26670 = EDGE_CURVE('',#22337,#26671,#26673,.T.); +#26671 = VERTEX_POINT('',#26672); +#26672 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#26673 = LINE('',#26674,#26675); +#26674 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#26675 = VECTOR('',#26676,1.); +#26676 = DIRECTION('',(0.,0.,-1.)); +#26677 = ORIENTED_EDGE('',*,*,#26678,.T.); +#26678 = EDGE_CURVE('',#26671,#26679,#26681,.T.); +#26679 = VERTEX_POINT('',#26680); +#26680 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#26681 = LINE('',#26682,#26683); +#26682 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#26683 = VECTOR('',#26684,1.); +#26684 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26685 = ORIENTED_EDGE('',*,*,#26686,.F.); +#26686 = EDGE_CURVE('',#26687,#26679,#26689,.T.); +#26687 = VERTEX_POINT('',#26688); +#26688 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#26689 = LINE('',#26690,#26691); +#26690 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#26691 = VECTOR('',#26692,1.); +#26692 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26693 = ORIENTED_EDGE('',*,*,#26694,.T.); +#26694 = EDGE_CURVE('',#26687,#26662,#26695,.T.); +#26695 = LINE('',#26696,#26697); +#26696 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#26697 = VECTOR('',#26698,1.); +#26698 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26699 = PLANE('',#26700); +#26700 = AXIS2_PLACEMENT_3D('',#26701,#26702,#26703); +#26701 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#26702 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26703 = DIRECTION('',(0.,0.,1.)); +#26704 = ADVANCED_FACE('',(#26705),#26716,.T.); +#26705 = FACE_BOUND('',#26706,.T.); +#26706 = EDGE_LOOP('',(#26707,#26708,#26709,#26715)); +#26707 = ORIENTED_EDGE('',*,*,#22384,.F.); +#26708 = ORIENTED_EDGE('',*,*,#22394,.T.); +#26709 = ORIENTED_EDGE('',*,*,#26710,.T.); +#26710 = EDGE_CURVE('',#22395,#22435,#26711,.T.); +#26711 = LINE('',#26712,#26713); +#26712 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#26713 = VECTOR('',#26714,1.); +#26714 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26715 = ORIENTED_EDGE('',*,*,#22442,.T.); +#26716 = PLANE('',#26717); +#26717 = AXIS2_PLACEMENT_3D('',#26718,#26719,#26720); +#26718 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#26719 = DIRECTION('',(0.,-0.,-1.)); +#26720 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26721 = ADVANCED_FACE('',(#26722),#26763,.F.); +#26722 = FACE_BOUND('',#26723,.F.); +#26723 = EDGE_LOOP('',(#26724,#26732,#26733,#26741,#26749,#26757)); +#26724 = ORIENTED_EDGE('',*,*,#26725,.T.); +#26725 = EDGE_CURVE('',#26726,#22435,#26728,.T.); +#26726 = VERTEX_POINT('',#26727); +#26727 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#26728 = LINE('',#26729,#26730); +#26729 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#26730 = VECTOR('',#26731,1.); +#26731 = DIRECTION('',(0.,0.,1.)); +#26732 = ORIENTED_EDGE('',*,*,#22434,.F.); +#26733 = ORIENTED_EDGE('',*,*,#26734,.T.); +#26734 = EDGE_CURVE('',#22427,#26735,#26737,.T.); +#26735 = VERTEX_POINT('',#26736); +#26736 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#26737 = LINE('',#26738,#26739); +#26738 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#26739 = VECTOR('',#26740,1.); +#26740 = DIRECTION('',(0.,0.,-1.)); +#26741 = ORIENTED_EDGE('',*,*,#26742,.T.); +#26742 = EDGE_CURVE('',#26735,#26743,#26745,.T.); +#26743 = VERTEX_POINT('',#26744); +#26744 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#26745 = LINE('',#26746,#26747); +#26746 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#26747 = VECTOR('',#26748,1.); +#26748 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26749 = ORIENTED_EDGE('',*,*,#26750,.T.); +#26750 = EDGE_CURVE('',#26743,#26751,#26753,.T.); +#26751 = VERTEX_POINT('',#26752); +#26752 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#26753 = LINE('',#26754,#26755); +#26754 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#26755 = VECTOR('',#26756,1.); +#26756 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26757 = ORIENTED_EDGE('',*,*,#26758,.T.); +#26758 = EDGE_CURVE('',#26751,#26726,#26759,.T.); +#26759 = LINE('',#26760,#26761); +#26760 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#26761 = VECTOR('',#26762,1.); +#26762 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26763 = PLANE('',#26764); +#26764 = AXIS2_PLACEMENT_3D('',#26765,#26766,#26767); +#26765 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#26766 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26767 = DIRECTION('',(0.,0.,1.)); +#26768 = ADVANCED_FACE('',(#26769),#26780,.T.); +#26769 = FACE_BOUND('',#26770,.T.); +#26770 = EDGE_LOOP('',(#26771,#26777,#26778,#26779)); +#26771 = ORIENTED_EDGE('',*,*,#26772,.F.); +#26772 = EDGE_CURVE('',#22403,#22427,#26773,.T.); +#26773 = LINE('',#26774,#26775); +#26774 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#26775 = VECTOR('',#26776,1.); +#26776 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26777 = ORIENTED_EDGE('',*,*,#22410,.T.); +#26778 = ORIENTED_EDGE('',*,*,#22418,.T.); +#26779 = ORIENTED_EDGE('',*,*,#22426,.T.); +#26780 = PLANE('',#26781); +#26781 = AXIS2_PLACEMENT_3D('',#26782,#26783,#26784); +#26782 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#26783 = DIRECTION('',(0.,-0.,-1.)); +#26784 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26785 = ADVANCED_FACE('',(#26786),#26827,.T.); +#26786 = FACE_BOUND('',#26787,.T.); +#26787 = EDGE_LOOP('',(#26788,#26796,#26797,#26805,#26813,#26821)); +#26788 = ORIENTED_EDGE('',*,*,#26789,.T.); +#26789 = EDGE_CURVE('',#26790,#22395,#26792,.T.); +#26790 = VERTEX_POINT('',#26791); +#26791 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#26792 = LINE('',#26793,#26794); +#26793 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#26794 = VECTOR('',#26795,1.); +#26795 = DIRECTION('',(0.,0.,1.)); +#26796 = ORIENTED_EDGE('',*,*,#22402,.F.); +#26797 = ORIENTED_EDGE('',*,*,#26798,.T.); +#26798 = EDGE_CURVE('',#22403,#26799,#26801,.T.); +#26799 = VERTEX_POINT('',#26800); +#26800 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#26801 = LINE('',#26802,#26803); +#26802 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#26803 = VECTOR('',#26804,1.); +#26804 = DIRECTION('',(0.,0.,-1.)); +#26805 = ORIENTED_EDGE('',*,*,#26806,.T.); +#26806 = EDGE_CURVE('',#26799,#26807,#26809,.T.); +#26807 = VERTEX_POINT('',#26808); +#26808 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#26809 = LINE('',#26810,#26811); +#26810 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#26811 = VECTOR('',#26812,1.); +#26812 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26813 = ORIENTED_EDGE('',*,*,#26814,.F.); +#26814 = EDGE_CURVE('',#26815,#26807,#26817,.T.); +#26815 = VERTEX_POINT('',#26816); +#26816 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#26817 = LINE('',#26818,#26819); +#26818 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#26819 = VECTOR('',#26820,1.); +#26820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26821 = ORIENTED_EDGE('',*,*,#26822,.T.); +#26822 = EDGE_CURVE('',#26815,#26790,#26823,.T.); +#26823 = LINE('',#26824,#26825); +#26824 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#26825 = VECTOR('',#26826,1.); +#26826 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26827 = PLANE('',#26828); +#26828 = AXIS2_PLACEMENT_3D('',#26829,#26830,#26831); +#26829 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#26830 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26831 = DIRECTION('',(0.,0.,1.)); +#26832 = ADVANCED_FACE('',(#26833),#26844,.T.); +#26833 = FACE_BOUND('',#26834,.T.); +#26834 = EDGE_LOOP('',(#26835,#26836,#26837,#26843)); +#26835 = ORIENTED_EDGE('',*,*,#22450,.F.); +#26836 = ORIENTED_EDGE('',*,*,#22460,.T.); +#26837 = ORIENTED_EDGE('',*,*,#26838,.T.); +#26838 = EDGE_CURVE('',#22461,#22501,#26839,.T.); +#26839 = LINE('',#26840,#26841); +#26840 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#26841 = VECTOR('',#26842,1.); +#26842 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26843 = ORIENTED_EDGE('',*,*,#22508,.T.); +#26844 = PLANE('',#26845); +#26845 = AXIS2_PLACEMENT_3D('',#26846,#26847,#26848); +#26846 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#26847 = DIRECTION('',(0.,-0.,-1.)); +#26848 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26849 = ADVANCED_FACE('',(#26850),#26891,.F.); +#26850 = FACE_BOUND('',#26851,.F.); +#26851 = EDGE_LOOP('',(#26852,#26860,#26861,#26869,#26877,#26885)); +#26852 = ORIENTED_EDGE('',*,*,#26853,.T.); +#26853 = EDGE_CURVE('',#26854,#22501,#26856,.T.); +#26854 = VERTEX_POINT('',#26855); +#26855 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#26856 = LINE('',#26857,#26858); +#26857 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#26858 = VECTOR('',#26859,1.); +#26859 = DIRECTION('',(0.,0.,1.)); +#26860 = ORIENTED_EDGE('',*,*,#22500,.F.); +#26861 = ORIENTED_EDGE('',*,*,#26862,.T.); +#26862 = EDGE_CURVE('',#22493,#26863,#26865,.T.); +#26863 = VERTEX_POINT('',#26864); +#26864 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#26865 = LINE('',#26866,#26867); +#26866 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#26867 = VECTOR('',#26868,1.); +#26868 = DIRECTION('',(0.,0.,-1.)); +#26869 = ORIENTED_EDGE('',*,*,#26870,.T.); +#26870 = EDGE_CURVE('',#26863,#26871,#26873,.T.); +#26871 = VERTEX_POINT('',#26872); +#26872 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#26873 = LINE('',#26874,#26875); +#26874 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#26875 = VECTOR('',#26876,1.); +#26876 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26877 = ORIENTED_EDGE('',*,*,#26878,.T.); +#26878 = EDGE_CURVE('',#26871,#26879,#26881,.T.); +#26879 = VERTEX_POINT('',#26880); +#26880 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#26881 = LINE('',#26882,#26883); +#26882 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#26883 = VECTOR('',#26884,1.); +#26884 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26885 = ORIENTED_EDGE('',*,*,#26886,.T.); +#26886 = EDGE_CURVE('',#26879,#26854,#26887,.T.); +#26887 = LINE('',#26888,#26889); +#26888 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#26889 = VECTOR('',#26890,1.); +#26890 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26891 = PLANE('',#26892); +#26892 = AXIS2_PLACEMENT_3D('',#26893,#26894,#26895); +#26893 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#26894 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26895 = DIRECTION('',(0.,0.,1.)); +#26896 = ADVANCED_FACE('',(#26897),#26908,.T.); +#26897 = FACE_BOUND('',#26898,.T.); +#26898 = EDGE_LOOP('',(#26899,#26905,#26906,#26907)); +#26899 = ORIENTED_EDGE('',*,*,#26900,.F.); +#26900 = EDGE_CURVE('',#22469,#22493,#26901,.T.); +#26901 = LINE('',#26902,#26903); +#26902 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#26903 = VECTOR('',#26904,1.); +#26904 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26905 = ORIENTED_EDGE('',*,*,#22476,.T.); +#26906 = ORIENTED_EDGE('',*,*,#22484,.T.); +#26907 = ORIENTED_EDGE('',*,*,#22492,.T.); +#26908 = PLANE('',#26909); +#26909 = AXIS2_PLACEMENT_3D('',#26910,#26911,#26912); +#26910 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#26911 = DIRECTION('',(0.,-0.,-1.)); +#26912 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26913 = ADVANCED_FACE('',(#26914),#26955,.T.); +#26914 = FACE_BOUND('',#26915,.T.); +#26915 = EDGE_LOOP('',(#26916,#26924,#26925,#26933,#26941,#26949)); +#26916 = ORIENTED_EDGE('',*,*,#26917,.T.); +#26917 = EDGE_CURVE('',#26918,#22461,#26920,.T.); +#26918 = VERTEX_POINT('',#26919); +#26919 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#26920 = LINE('',#26921,#26922); +#26921 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#26922 = VECTOR('',#26923,1.); +#26923 = DIRECTION('',(0.,0.,1.)); +#26924 = ORIENTED_EDGE('',*,*,#22468,.F.); +#26925 = ORIENTED_EDGE('',*,*,#26926,.T.); +#26926 = EDGE_CURVE('',#22469,#26927,#26929,.T.); +#26927 = VERTEX_POINT('',#26928); +#26928 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#26929 = LINE('',#26930,#26931); +#26930 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#26931 = VECTOR('',#26932,1.); +#26932 = DIRECTION('',(0.,0.,-1.)); +#26933 = ORIENTED_EDGE('',*,*,#26934,.T.); +#26934 = EDGE_CURVE('',#26927,#26935,#26937,.T.); +#26935 = VERTEX_POINT('',#26936); +#26936 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#26937 = LINE('',#26938,#26939); +#26938 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#26939 = VECTOR('',#26940,1.); +#26940 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26941 = ORIENTED_EDGE('',*,*,#26942,.F.); +#26942 = EDGE_CURVE('',#26943,#26935,#26945,.T.); +#26943 = VERTEX_POINT('',#26944); +#26944 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#26945 = LINE('',#26946,#26947); +#26946 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#26947 = VECTOR('',#26948,1.); +#26948 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26949 = ORIENTED_EDGE('',*,*,#26950,.T.); +#26950 = EDGE_CURVE('',#26943,#26918,#26951,.T.); +#26951 = LINE('',#26952,#26953); +#26952 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#26953 = VECTOR('',#26954,1.); +#26954 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26955 = PLANE('',#26956); +#26956 = AXIS2_PLACEMENT_3D('',#26957,#26958,#26959); +#26957 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#26958 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26959 = DIRECTION('',(0.,0.,1.)); +#26960 = ADVANCED_FACE('',(#26961),#26972,.T.); +#26961 = FACE_BOUND('',#26962,.T.); +#26962 = EDGE_LOOP('',(#26963,#26964,#26965,#26971)); +#26963 = ORIENTED_EDGE('',*,*,#22516,.F.); +#26964 = ORIENTED_EDGE('',*,*,#22526,.T.); +#26965 = ORIENTED_EDGE('',*,*,#26966,.T.); +#26966 = EDGE_CURVE('',#22527,#22567,#26967,.T.); +#26967 = LINE('',#26968,#26969); +#26968 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#26969 = VECTOR('',#26970,1.); +#26970 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26971 = ORIENTED_EDGE('',*,*,#22574,.T.); +#26972 = PLANE('',#26973); +#26973 = AXIS2_PLACEMENT_3D('',#26974,#26975,#26976); +#26974 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#26975 = DIRECTION('',(0.,-0.,-1.)); +#26976 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26977 = ADVANCED_FACE('',(#26978),#27019,.F.); +#26978 = FACE_BOUND('',#26979,.F.); +#26979 = EDGE_LOOP('',(#26980,#26988,#26989,#26997,#27005,#27013)); +#26980 = ORIENTED_EDGE('',*,*,#26981,.T.); +#26981 = EDGE_CURVE('',#26982,#22567,#26984,.T.); +#26982 = VERTEX_POINT('',#26983); +#26983 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#26984 = LINE('',#26985,#26986); +#26985 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#26986 = VECTOR('',#26987,1.); +#26987 = DIRECTION('',(0.,0.,1.)); +#26988 = ORIENTED_EDGE('',*,*,#22566,.F.); +#26989 = ORIENTED_EDGE('',*,*,#26990,.T.); +#26990 = EDGE_CURVE('',#22559,#26991,#26993,.T.); +#26991 = VERTEX_POINT('',#26992); +#26992 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#26993 = LINE('',#26994,#26995); +#26994 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#26995 = VECTOR('',#26996,1.); +#26996 = DIRECTION('',(0.,0.,-1.)); +#26997 = ORIENTED_EDGE('',*,*,#26998,.T.); +#26998 = EDGE_CURVE('',#26991,#26999,#27001,.T.); +#26999 = VERTEX_POINT('',#27000); +#27000 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#27001 = LINE('',#27002,#27003); +#27002 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#27003 = VECTOR('',#27004,1.); +#27004 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#27005 = ORIENTED_EDGE('',*,*,#27006,.T.); +#27006 = EDGE_CURVE('',#26999,#27007,#27009,.T.); +#27007 = VERTEX_POINT('',#27008); +#27008 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#27009 = LINE('',#27010,#27011); +#27010 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#27011 = VECTOR('',#27012,1.); +#27012 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27013 = ORIENTED_EDGE('',*,*,#27014,.T.); +#27014 = EDGE_CURVE('',#27007,#26982,#27015,.T.); +#27015 = LINE('',#27016,#27017); +#27016 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#27017 = VECTOR('',#27018,1.); +#27018 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#27019 = PLANE('',#27020); +#27020 = AXIS2_PLACEMENT_3D('',#27021,#27022,#27023); +#27021 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#27022 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27023 = DIRECTION('',(0.,0.,1.)); +#27024 = ADVANCED_FACE('',(#27025),#27036,.T.); +#27025 = FACE_BOUND('',#27026,.T.); +#27026 = EDGE_LOOP('',(#27027,#27033,#27034,#27035)); +#27027 = ORIENTED_EDGE('',*,*,#27028,.F.); +#27028 = EDGE_CURVE('',#22535,#22559,#27029,.T.); +#27029 = LINE('',#27030,#27031); +#27030 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#27031 = VECTOR('',#27032,1.); +#27032 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27033 = ORIENTED_EDGE('',*,*,#22542,.T.); +#27034 = ORIENTED_EDGE('',*,*,#22550,.T.); +#27035 = ORIENTED_EDGE('',*,*,#22558,.T.); +#27036 = PLANE('',#27037); +#27037 = AXIS2_PLACEMENT_3D('',#27038,#27039,#27040); +#27038 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#27039 = DIRECTION('',(0.,-0.,-1.)); +#27040 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27041 = ADVANCED_FACE('',(#27042),#27083,.T.); +#27042 = FACE_BOUND('',#27043,.T.); +#27043 = EDGE_LOOP('',(#27044,#27052,#27053,#27061,#27069,#27077)); +#27044 = ORIENTED_EDGE('',*,*,#27045,.T.); +#27045 = EDGE_CURVE('',#27046,#22527,#27048,.T.); +#27046 = VERTEX_POINT('',#27047); +#27047 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#27048 = LINE('',#27049,#27050); +#27049 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#27050 = VECTOR('',#27051,1.); +#27051 = DIRECTION('',(0.,0.,1.)); +#27052 = ORIENTED_EDGE('',*,*,#22534,.F.); +#27053 = ORIENTED_EDGE('',*,*,#27054,.T.); +#27054 = EDGE_CURVE('',#22535,#27055,#27057,.T.); +#27055 = VERTEX_POINT('',#27056); +#27056 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#27057 = LINE('',#27058,#27059); +#27058 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#27059 = VECTOR('',#27060,1.); +#27060 = DIRECTION('',(0.,0.,-1.)); +#27061 = ORIENTED_EDGE('',*,*,#27062,.T.); +#27062 = EDGE_CURVE('',#27055,#27063,#27065,.T.); +#27063 = VERTEX_POINT('',#27064); +#27064 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#27065 = LINE('',#27066,#27067); +#27066 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#27067 = VECTOR('',#27068,1.); +#27068 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#27069 = ORIENTED_EDGE('',*,*,#27070,.F.); +#27070 = EDGE_CURVE('',#27071,#27063,#27073,.T.); +#27071 = VERTEX_POINT('',#27072); +#27072 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#27073 = LINE('',#27074,#27075); +#27074 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#27075 = VECTOR('',#27076,1.); +#27076 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27077 = ORIENTED_EDGE('',*,*,#27078,.T.); +#27078 = EDGE_CURVE('',#27071,#27046,#27079,.T.); +#27079 = LINE('',#27080,#27081); +#27080 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#27081 = VECTOR('',#27082,1.); +#27082 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#27083 = PLANE('',#27084); +#27084 = AXIS2_PLACEMENT_3D('',#27085,#27086,#27087); +#27085 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#27086 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27087 = DIRECTION('',(0.,0.,1.)); +#27088 = ADVANCED_FACE('',(#27089),#27114,.F.); +#27089 = FACE_BOUND('',#27090,.F.); +#27090 = EDGE_LOOP('',(#27091,#27099,#27107,#27113)); +#27091 = ORIENTED_EDGE('',*,*,#27092,.T.); +#27092 = EDGE_CURVE('',#22613,#27093,#27095,.T.); +#27093 = VERTEX_POINT('',#27094); +#27094 = CARTESIAN_POINT('',(0.3,-48.56,0.9)); +#27095 = LINE('',#27096,#27097); +#27096 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#27097 = VECTOR('',#27098,1.); +#27098 = DIRECTION('',(0.,-0.,-1.)); +#27099 = ORIENTED_EDGE('',*,*,#27100,.T.); +#27100 = EDGE_CURVE('',#27093,#27101,#27103,.T.); +#27101 = VERTEX_POINT('',#27102); +#27102 = CARTESIAN_POINT('',(0.3,-47.96,0.9)); +#27103 = LINE('',#27104,#27105); +#27104 = CARTESIAN_POINT('',(0.3,-48.56,0.9)); +#27105 = VECTOR('',#27106,1.); +#27106 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27107 = ORIENTED_EDGE('',*,*,#27108,.F.); +#27108 = EDGE_CURVE('',#22622,#27101,#27109,.T.); +#27109 = LINE('',#27110,#27111); +#27110 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#27111 = VECTOR('',#27112,1.); +#27112 = DIRECTION('',(0.,-0.,-1.)); +#27113 = ORIENTED_EDGE('',*,*,#22629,.F.); +#27114 = PLANE('',#27115); +#27115 = AXIS2_PLACEMENT_3D('',#27116,#27117,#27118); +#27116 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#27117 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27118 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27119 = ADVANCED_FACE('',(#27120),#27170,.F.); +#27120 = FACE_BOUND('',#27121,.F.); +#27121 = EDGE_LOOP('',(#27122,#27123,#27124,#27132,#27140,#27148,#27156, + #27164)); +#27122 = ORIENTED_EDGE('',*,*,#22653,.F.); +#27123 = ORIENTED_EDGE('',*,*,#27108,.T.); +#27124 = ORIENTED_EDGE('',*,*,#27125,.T.); +#27125 = EDGE_CURVE('',#27101,#27126,#27128,.T.); +#27126 = VERTEX_POINT('',#27127); +#27127 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,0.9)); +#27128 = LINE('',#27129,#27130); +#27129 = CARTESIAN_POINT('',(0.3,-47.96,0.9)); +#27130 = VECTOR('',#27131,1.); +#27131 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27132 = ORIENTED_EDGE('',*,*,#27133,.T.); +#27133 = EDGE_CURVE('',#27126,#27134,#27136,.T.); +#27134 = VERTEX_POINT('',#27135); +#27135 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,7.4)); +#27136 = LINE('',#27137,#27138); +#27137 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,6.055738799212)); +#27138 = VECTOR('',#27139,1.); +#27139 = DIRECTION('',(0.,-0.,1.)); +#27140 = ORIENTED_EDGE('',*,*,#27141,.F.); +#27141 = EDGE_CURVE('',#27142,#27134,#27144,.T.); +#27142 = VERTEX_POINT('',#27143); +#27143 = CARTESIAN_POINT('',(-0.1,-47.96,7.4)); +#27144 = LINE('',#27145,#27146); +#27145 = CARTESIAN_POINT('',(-0.1,-47.96,7.4)); +#27146 = VECTOR('',#27147,1.); +#27147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27148 = ORIENTED_EDGE('',*,*,#27149,.F.); +#27149 = EDGE_CURVE('',#27150,#27142,#27152,.T.); +#27150 = VERTEX_POINT('',#27151); +#27151 = CARTESIAN_POINT('',(-0.1,-47.96,0.9)); +#27152 = LINE('',#27153,#27154); +#27153 = CARTESIAN_POINT('',(-0.1,-47.96,6.055738799212)); +#27154 = VECTOR('',#27155,1.); +#27155 = DIRECTION('',(0.,-0.,1.)); +#27156 = ORIENTED_EDGE('',*,*,#27157,.T.); +#27157 = EDGE_CURVE('',#27150,#27158,#27160,.T.); +#27158 = VERTEX_POINT('',#27159); +#27159 = CARTESIAN_POINT('',(-0.3,-47.96,0.9)); +#27160 = LINE('',#27161,#27162); +#27161 = CARTESIAN_POINT('',(0.3,-47.96,0.9)); +#27162 = VECTOR('',#27163,1.); +#27163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27164 = ORIENTED_EDGE('',*,*,#27165,.F.); +#27165 = EDGE_CURVE('',#22646,#27158,#27166,.T.); +#27166 = LINE('',#27167,#27168); +#27167 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#27168 = VECTOR('',#27169,1.); +#27169 = DIRECTION('',(0.,-0.,-1.)); +#27170 = PLANE('',#27171); +#27171 = AXIS2_PLACEMENT_3D('',#27172,#27173,#27174); +#27172 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#27173 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27174 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27175 = ADVANCED_FACE('',(#27176),#27194,.F.); +#27176 = FACE_BOUND('',#27177,.F.); +#27177 = EDGE_LOOP('',(#27178,#27179,#27187,#27193)); +#27178 = ORIENTED_EDGE('',*,*,#27165,.T.); +#27179 = ORIENTED_EDGE('',*,*,#27180,.T.); +#27180 = EDGE_CURVE('',#27158,#27181,#27183,.T.); +#27181 = VERTEX_POINT('',#27182); +#27182 = CARTESIAN_POINT('',(-0.3,-48.56,0.9)); +#27183 = LINE('',#27184,#27185); +#27184 = CARTESIAN_POINT('',(-0.3,-47.96,0.9)); +#27185 = VECTOR('',#27186,1.); +#27186 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27187 = ORIENTED_EDGE('',*,*,#27188,.F.); +#27188 = EDGE_CURVE('',#22670,#27181,#27189,.T.); +#27189 = LINE('',#27190,#27191); +#27190 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#27191 = VECTOR('',#27192,1.); +#27192 = DIRECTION('',(0.,-0.,-1.)); +#27193 = ORIENTED_EDGE('',*,*,#22677,.F.); +#27194 = PLANE('',#27195); +#27195 = AXIS2_PLACEMENT_3D('',#27196,#27197,#27198); +#27196 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#27197 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27198 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27199 = ADVANCED_FACE('',(#27200),#27243,.F.); +#27200 = FACE_BOUND('',#27201,.F.); +#27201 = EDGE_LOOP('',(#27202,#27203,#27204,#27212,#27220,#27228,#27236, + #27242)); +#27202 = ORIENTED_EDGE('',*,*,#22694,.F.); +#27203 = ORIENTED_EDGE('',*,*,#27188,.T.); +#27204 = ORIENTED_EDGE('',*,*,#27205,.T.); +#27205 = EDGE_CURVE('',#27181,#27206,#27208,.T.); +#27206 = VERTEX_POINT('',#27207); +#27207 = CARTESIAN_POINT('',(-0.1,-48.56,0.9)); +#27208 = LINE('',#27209,#27210); +#27209 = CARTESIAN_POINT('',(-0.3,-48.56,0.9)); +#27210 = VECTOR('',#27211,1.); +#27211 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27212 = ORIENTED_EDGE('',*,*,#27213,.F.); +#27213 = EDGE_CURVE('',#27214,#27206,#27216,.T.); +#27214 = VERTEX_POINT('',#27215); +#27215 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#27216 = LINE('',#27217,#27218); +#27217 = CARTESIAN_POINT('',(-0.1,-48.56,6.055738799212)); +#27218 = VECTOR('',#27219,1.); +#27219 = DIRECTION('',(-0.,0.,-1.)); +#27220 = ORIENTED_EDGE('',*,*,#27221,.T.); +#27221 = EDGE_CURVE('',#27214,#27222,#27224,.T.); +#27222 = VERTEX_POINT('',#27223); +#27223 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,7.4)); +#27224 = LINE('',#27225,#27226); +#27225 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#27226 = VECTOR('',#27227,1.); +#27227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27228 = ORIENTED_EDGE('',*,*,#27229,.T.); +#27229 = EDGE_CURVE('',#27222,#27230,#27232,.T.); +#27230 = VERTEX_POINT('',#27231); +#27231 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,0.9)); +#27232 = LINE('',#27233,#27234); +#27233 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,6.055738799212)); +#27234 = VECTOR('',#27235,1.); +#27235 = DIRECTION('',(-0.,0.,-1.)); +#27236 = ORIENTED_EDGE('',*,*,#27237,.T.); +#27237 = EDGE_CURVE('',#27230,#27093,#27238,.T.); +#27238 = LINE('',#27239,#27240); +#27239 = CARTESIAN_POINT('',(-0.3,-48.56,0.9)); +#27240 = VECTOR('',#27241,1.); +#27241 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27242 = ORIENTED_EDGE('',*,*,#27092,.F.); +#27243 = PLANE('',#27244); +#27244 = AXIS2_PLACEMENT_3D('',#27245,#27246,#27247); +#27245 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#27246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27247 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27248 = ADVANCED_FACE('',(#27249),#27274,.F.); +#27249 = FACE_BOUND('',#27250,.F.); +#27250 = EDGE_LOOP('',(#27251,#27259,#27267,#27273)); +#27251 = ORIENTED_EDGE('',*,*,#27252,.T.); +#27252 = EDGE_CURVE('',#22709,#27253,#27255,.T.); +#27253 = VERTEX_POINT('',#27254); +#27254 = CARTESIAN_POINT('',(0.3,-46.02,0.9)); +#27255 = LINE('',#27256,#27257); +#27256 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#27257 = VECTOR('',#27258,1.); +#27258 = DIRECTION('',(0.,-0.,-1.)); +#27259 = ORIENTED_EDGE('',*,*,#27260,.T.); +#27260 = EDGE_CURVE('',#27253,#27261,#27263,.T.); +#27261 = VERTEX_POINT('',#27262); +#27262 = CARTESIAN_POINT('',(0.3,-45.42,0.9)); +#27263 = LINE('',#27264,#27265); +#27264 = CARTESIAN_POINT('',(0.3,-46.02,0.9)); +#27265 = VECTOR('',#27266,1.); +#27266 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27267 = ORIENTED_EDGE('',*,*,#27268,.F.); +#27268 = EDGE_CURVE('',#22718,#27261,#27269,.T.); +#27269 = LINE('',#27270,#27271); +#27270 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#27271 = VECTOR('',#27272,1.); +#27272 = DIRECTION('',(0.,-0.,-1.)); +#27273 = ORIENTED_EDGE('',*,*,#22725,.F.); +#27274 = PLANE('',#27275); +#27275 = AXIS2_PLACEMENT_3D('',#27276,#27277,#27278); +#27276 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#27277 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27278 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27279 = ADVANCED_FACE('',(#27280),#27330,.F.); +#27280 = FACE_BOUND('',#27281,.F.); +#27281 = EDGE_LOOP('',(#27282,#27283,#27284,#27292,#27300,#27308,#27316, + #27324)); +#27282 = ORIENTED_EDGE('',*,*,#22749,.F.); +#27283 = ORIENTED_EDGE('',*,*,#27268,.T.); +#27284 = ORIENTED_EDGE('',*,*,#27285,.T.); +#27285 = EDGE_CURVE('',#27261,#27286,#27288,.T.); +#27286 = VERTEX_POINT('',#27287); +#27287 = CARTESIAN_POINT('',(0.1,-45.42,0.9)); +#27288 = LINE('',#27289,#27290); +#27289 = CARTESIAN_POINT('',(0.3,-45.42,0.9)); +#27290 = VECTOR('',#27291,1.); +#27291 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27292 = ORIENTED_EDGE('',*,*,#27293,.T.); +#27293 = EDGE_CURVE('',#27286,#27294,#27296,.T.); +#27294 = VERTEX_POINT('',#27295); +#27295 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,7.4)); +#27296 = LINE('',#27297,#27298); +#27297 = CARTESIAN_POINT('',(0.1,-45.42,6.055738799212)); +#27298 = VECTOR('',#27299,1.); +#27299 = DIRECTION('',(0.,-0.,1.)); +#27300 = ORIENTED_EDGE('',*,*,#27301,.F.); +#27301 = EDGE_CURVE('',#27302,#27294,#27304,.T.); +#27302 = VERTEX_POINT('',#27303); +#27303 = CARTESIAN_POINT('',(-0.1,-45.42,7.4)); +#27304 = LINE('',#27305,#27306); +#27305 = CARTESIAN_POINT('',(-0.1,-45.42,7.4)); +#27306 = VECTOR('',#27307,1.); +#27307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27308 = ORIENTED_EDGE('',*,*,#27309,.F.); +#27309 = EDGE_CURVE('',#27310,#27302,#27312,.T.); +#27310 = VERTEX_POINT('',#27311); +#27311 = CARTESIAN_POINT('',(-0.1,-45.42,0.9)); +#27312 = LINE('',#27313,#27314); +#27313 = CARTESIAN_POINT('',(-0.1,-45.42,6.055738799212)); +#27314 = VECTOR('',#27315,1.); +#27315 = DIRECTION('',(0.,-0.,1.)); +#27316 = ORIENTED_EDGE('',*,*,#27317,.T.); +#27317 = EDGE_CURVE('',#27310,#27318,#27320,.T.); +#27318 = VERTEX_POINT('',#27319); +#27319 = CARTESIAN_POINT('',(-0.3,-45.42,0.9)); +#27320 = LINE('',#27321,#27322); +#27321 = CARTESIAN_POINT('',(0.3,-45.42,0.9)); +#27322 = VECTOR('',#27323,1.); +#27323 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27324 = ORIENTED_EDGE('',*,*,#27325,.F.); +#27325 = EDGE_CURVE('',#22742,#27318,#27326,.T.); +#27326 = LINE('',#27327,#27328); +#27327 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#27328 = VECTOR('',#27329,1.); +#27329 = DIRECTION('',(0.,-0.,-1.)); +#27330 = PLANE('',#27331); +#27331 = AXIS2_PLACEMENT_3D('',#27332,#27333,#27334); +#27332 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#27333 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27334 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27335 = ADVANCED_FACE('',(#27336),#27354,.F.); +#27336 = FACE_BOUND('',#27337,.F.); +#27337 = EDGE_LOOP('',(#27338,#27339,#27347,#27353)); +#27338 = ORIENTED_EDGE('',*,*,#27325,.T.); +#27339 = ORIENTED_EDGE('',*,*,#27340,.T.); +#27340 = EDGE_CURVE('',#27318,#27341,#27343,.T.); +#27341 = VERTEX_POINT('',#27342); +#27342 = CARTESIAN_POINT('',(-0.3,-46.02,0.9)); +#27343 = LINE('',#27344,#27345); +#27344 = CARTESIAN_POINT('',(-0.3,-45.42,0.9)); +#27345 = VECTOR('',#27346,1.); +#27346 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27347 = ORIENTED_EDGE('',*,*,#27348,.F.); +#27348 = EDGE_CURVE('',#22766,#27341,#27349,.T.); +#27349 = LINE('',#27350,#27351); +#27350 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#27351 = VECTOR('',#27352,1.); +#27352 = DIRECTION('',(0.,-0.,-1.)); +#27353 = ORIENTED_EDGE('',*,*,#22773,.F.); +#27354 = PLANE('',#27355); +#27355 = AXIS2_PLACEMENT_3D('',#27356,#27357,#27358); +#27356 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#27357 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27358 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27359 = ADVANCED_FACE('',(#27360),#27403,.F.); +#27360 = FACE_BOUND('',#27361,.F.); +#27361 = EDGE_LOOP('',(#27362,#27363,#27364,#27372,#27380,#27388,#27396, + #27402)); +#27362 = ORIENTED_EDGE('',*,*,#22790,.F.); +#27363 = ORIENTED_EDGE('',*,*,#27348,.T.); +#27364 = ORIENTED_EDGE('',*,*,#27365,.T.); +#27365 = EDGE_CURVE('',#27341,#27366,#27368,.T.); +#27366 = VERTEX_POINT('',#27367); +#27367 = CARTESIAN_POINT('',(-0.1,-46.02,0.9)); +#27368 = LINE('',#27369,#27370); +#27369 = CARTESIAN_POINT('',(-0.3,-46.02,0.9)); +#27370 = VECTOR('',#27371,1.); +#27371 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27372 = ORIENTED_EDGE('',*,*,#27373,.F.); +#27373 = EDGE_CURVE('',#27374,#27366,#27376,.T.); +#27374 = VERTEX_POINT('',#27375); +#27375 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#27376 = LINE('',#27377,#27378); +#27377 = CARTESIAN_POINT('',(-0.1,-46.02,6.055738799212)); +#27378 = VECTOR('',#27379,1.); +#27379 = DIRECTION('',(-0.,0.,-1.)); +#27380 = ORIENTED_EDGE('',*,*,#27381,.T.); +#27381 = EDGE_CURVE('',#27374,#27382,#27384,.T.); +#27382 = VERTEX_POINT('',#27383); +#27383 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,7.4)); +#27384 = LINE('',#27385,#27386); +#27385 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#27386 = VECTOR('',#27387,1.); +#27387 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27388 = ORIENTED_EDGE('',*,*,#27389,.T.); +#27389 = EDGE_CURVE('',#27382,#27390,#27392,.T.); +#27390 = VERTEX_POINT('',#27391); +#27391 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,0.9)); +#27392 = LINE('',#27393,#27394); +#27393 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,6.055738799212)); +#27394 = VECTOR('',#27395,1.); +#27395 = DIRECTION('',(-0.,0.,-1.)); +#27396 = ORIENTED_EDGE('',*,*,#27397,.T.); +#27397 = EDGE_CURVE('',#27390,#27253,#27398,.T.); +#27398 = LINE('',#27399,#27400); +#27399 = CARTESIAN_POINT('',(-0.3,-46.02,0.9)); +#27400 = VECTOR('',#27401,1.); +#27401 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27402 = ORIENTED_EDGE('',*,*,#27252,.F.); +#27403 = PLANE('',#27404); +#27404 = AXIS2_PLACEMENT_3D('',#27405,#27406,#27407); +#27405 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#27406 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27407 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27408 = ADVANCED_FACE('',(#27409),#27434,.F.); +#27409 = FACE_BOUND('',#27410,.F.); +#27410 = EDGE_LOOP('',(#27411,#27419,#27427,#27433)); +#27411 = ORIENTED_EDGE('',*,*,#27412,.T.); +#27412 = EDGE_CURVE('',#22805,#27413,#27415,.T.); +#27413 = VERTEX_POINT('',#27414); +#27414 = CARTESIAN_POINT('',(0.3,-43.48,0.9)); +#27415 = LINE('',#27416,#27417); +#27416 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#27417 = VECTOR('',#27418,1.); +#27418 = DIRECTION('',(0.,-0.,-1.)); +#27419 = ORIENTED_EDGE('',*,*,#27420,.T.); +#27420 = EDGE_CURVE('',#27413,#27421,#27423,.T.); +#27421 = VERTEX_POINT('',#27422); +#27422 = CARTESIAN_POINT('',(0.3,-42.88,0.9)); +#27423 = LINE('',#27424,#27425); +#27424 = CARTESIAN_POINT('',(0.3,-43.48,0.9)); +#27425 = VECTOR('',#27426,1.); +#27426 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27427 = ORIENTED_EDGE('',*,*,#27428,.F.); +#27428 = EDGE_CURVE('',#22814,#27421,#27429,.T.); +#27429 = LINE('',#27430,#27431); +#27430 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#27431 = VECTOR('',#27432,1.); +#27432 = DIRECTION('',(0.,-0.,-1.)); +#27433 = ORIENTED_EDGE('',*,*,#22821,.F.); +#27434 = PLANE('',#27435); +#27435 = AXIS2_PLACEMENT_3D('',#27436,#27437,#27438); +#27436 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#27437 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27438 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27439 = ADVANCED_FACE('',(#27440),#27490,.F.); +#27440 = FACE_BOUND('',#27441,.F.); +#27441 = EDGE_LOOP('',(#27442,#27443,#27444,#27452,#27460,#27468,#27476, + #27484)); +#27442 = ORIENTED_EDGE('',*,*,#22845,.F.); +#27443 = ORIENTED_EDGE('',*,*,#27428,.T.); +#27444 = ORIENTED_EDGE('',*,*,#27445,.T.); +#27445 = EDGE_CURVE('',#27421,#27446,#27448,.T.); +#27446 = VERTEX_POINT('',#27447); +#27447 = CARTESIAN_POINT('',(0.1,-42.88,0.9)); +#27448 = LINE('',#27449,#27450); +#27449 = CARTESIAN_POINT('',(0.3,-42.88,0.9)); +#27450 = VECTOR('',#27451,1.); +#27451 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27452 = ORIENTED_EDGE('',*,*,#27453,.T.); +#27453 = EDGE_CURVE('',#27446,#27454,#27456,.T.); +#27454 = VERTEX_POINT('',#27455); +#27455 = CARTESIAN_POINT('',(0.1,-42.88,7.4)); +#27456 = LINE('',#27457,#27458); +#27457 = CARTESIAN_POINT('',(0.1,-42.88,6.055738799212)); +#27458 = VECTOR('',#27459,1.); +#27459 = DIRECTION('',(0.,-0.,1.)); +#27460 = ORIENTED_EDGE('',*,*,#27461,.F.); +#27461 = EDGE_CURVE('',#27462,#27454,#27464,.T.); +#27462 = VERTEX_POINT('',#27463); +#27463 = CARTESIAN_POINT('',(-0.1,-42.88,7.4)); +#27464 = LINE('',#27465,#27466); +#27465 = CARTESIAN_POINT('',(-0.1,-42.88,7.4)); +#27466 = VECTOR('',#27467,1.); +#27467 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27468 = ORIENTED_EDGE('',*,*,#27469,.F.); +#27469 = EDGE_CURVE('',#27470,#27462,#27472,.T.); +#27470 = VERTEX_POINT('',#27471); +#27471 = CARTESIAN_POINT('',(-0.1,-42.88,0.9)); +#27472 = LINE('',#27473,#27474); +#27473 = CARTESIAN_POINT('',(-0.1,-42.88,6.055738799212)); +#27474 = VECTOR('',#27475,1.); +#27475 = DIRECTION('',(0.,-0.,1.)); +#27476 = ORIENTED_EDGE('',*,*,#27477,.T.); +#27477 = EDGE_CURVE('',#27470,#27478,#27480,.T.); +#27478 = VERTEX_POINT('',#27479); +#27479 = CARTESIAN_POINT('',(-0.3,-42.88,0.9)); +#27480 = LINE('',#27481,#27482); +#27481 = CARTESIAN_POINT('',(0.3,-42.88,0.9)); +#27482 = VECTOR('',#27483,1.); +#27483 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27484 = ORIENTED_EDGE('',*,*,#27485,.F.); +#27485 = EDGE_CURVE('',#22838,#27478,#27486,.T.); +#27486 = LINE('',#27487,#27488); +#27487 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#27488 = VECTOR('',#27489,1.); +#27489 = DIRECTION('',(0.,-0.,-1.)); +#27490 = PLANE('',#27491); +#27491 = AXIS2_PLACEMENT_3D('',#27492,#27493,#27494); +#27492 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#27493 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27494 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27495 = ADVANCED_FACE('',(#27496),#27514,.F.); +#27496 = FACE_BOUND('',#27497,.F.); +#27497 = EDGE_LOOP('',(#27498,#27499,#27507,#27513)); +#27498 = ORIENTED_EDGE('',*,*,#27485,.T.); +#27499 = ORIENTED_EDGE('',*,*,#27500,.T.); +#27500 = EDGE_CURVE('',#27478,#27501,#27503,.T.); +#27501 = VERTEX_POINT('',#27502); +#27502 = CARTESIAN_POINT('',(-0.3,-43.48,0.9)); +#27503 = LINE('',#27504,#27505); +#27504 = CARTESIAN_POINT('',(-0.3,-42.88,0.9)); +#27505 = VECTOR('',#27506,1.); +#27506 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27507 = ORIENTED_EDGE('',*,*,#27508,.F.); +#27508 = EDGE_CURVE('',#22862,#27501,#27509,.T.); +#27509 = LINE('',#27510,#27511); +#27510 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#27511 = VECTOR('',#27512,1.); +#27512 = DIRECTION('',(0.,-0.,-1.)); +#27513 = ORIENTED_EDGE('',*,*,#22869,.F.); +#27514 = PLANE('',#27515); +#27515 = AXIS2_PLACEMENT_3D('',#27516,#27517,#27518); +#27516 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#27517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27518 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27519 = ADVANCED_FACE('',(#27520),#27563,.F.); +#27520 = FACE_BOUND('',#27521,.F.); +#27521 = EDGE_LOOP('',(#27522,#27523,#27524,#27532,#27540,#27548,#27556, + #27562)); +#27522 = ORIENTED_EDGE('',*,*,#22886,.F.); +#27523 = ORIENTED_EDGE('',*,*,#27508,.T.); +#27524 = ORIENTED_EDGE('',*,*,#27525,.T.); +#27525 = EDGE_CURVE('',#27501,#27526,#27528,.T.); +#27526 = VERTEX_POINT('',#27527); +#27527 = CARTESIAN_POINT('',(-0.1,-43.48,0.9)); +#27528 = LINE('',#27529,#27530); +#27529 = CARTESIAN_POINT('',(-0.3,-43.48,0.9)); +#27530 = VECTOR('',#27531,1.); +#27531 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27532 = ORIENTED_EDGE('',*,*,#27533,.F.); +#27533 = EDGE_CURVE('',#27534,#27526,#27536,.T.); +#27534 = VERTEX_POINT('',#27535); +#27535 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#27536 = LINE('',#27537,#27538); +#27537 = CARTESIAN_POINT('',(-0.1,-43.48,6.055738799212)); +#27538 = VECTOR('',#27539,1.); +#27539 = DIRECTION('',(-0.,0.,-1.)); +#27540 = ORIENTED_EDGE('',*,*,#27541,.T.); +#27541 = EDGE_CURVE('',#27534,#27542,#27544,.T.); +#27542 = VERTEX_POINT('',#27543); +#27543 = CARTESIAN_POINT('',(0.1,-43.48,7.4)); +#27544 = LINE('',#27545,#27546); +#27545 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#27546 = VECTOR('',#27547,1.); +#27547 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27548 = ORIENTED_EDGE('',*,*,#27549,.T.); +#27549 = EDGE_CURVE('',#27542,#27550,#27552,.T.); +#27550 = VERTEX_POINT('',#27551); +#27551 = CARTESIAN_POINT('',(0.1,-43.48,0.9)); +#27552 = LINE('',#27553,#27554); +#27553 = CARTESIAN_POINT('',(0.1,-43.48,6.055738799212)); +#27554 = VECTOR('',#27555,1.); +#27555 = DIRECTION('',(-0.,0.,-1.)); +#27556 = ORIENTED_EDGE('',*,*,#27557,.T.); +#27557 = EDGE_CURVE('',#27550,#27413,#27558,.T.); +#27558 = LINE('',#27559,#27560); +#27559 = CARTESIAN_POINT('',(-0.3,-43.48,0.9)); +#27560 = VECTOR('',#27561,1.); +#27561 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27562 = ORIENTED_EDGE('',*,*,#27412,.F.); +#27563 = PLANE('',#27564); +#27564 = AXIS2_PLACEMENT_3D('',#27565,#27566,#27567); +#27565 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#27566 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27567 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27568 = ADVANCED_FACE('',(#27569),#27594,.F.); +#27569 = FACE_BOUND('',#27570,.F.); +#27570 = EDGE_LOOP('',(#27571,#27579,#27587,#27593)); +#27571 = ORIENTED_EDGE('',*,*,#27572,.T.); +#27572 = EDGE_CURVE('',#22901,#27573,#27575,.T.); +#27573 = VERTEX_POINT('',#27574); +#27574 = CARTESIAN_POINT('',(0.3,-40.94,0.9)); +#27575 = LINE('',#27576,#27577); +#27576 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#27577 = VECTOR('',#27578,1.); +#27578 = DIRECTION('',(0.,-0.,-1.)); +#27579 = ORIENTED_EDGE('',*,*,#27580,.T.); +#27580 = EDGE_CURVE('',#27573,#27581,#27583,.T.); +#27581 = VERTEX_POINT('',#27582); +#27582 = CARTESIAN_POINT('',(0.3,-40.34,0.9)); +#27583 = LINE('',#27584,#27585); +#27584 = CARTESIAN_POINT('',(0.3,-40.94,0.9)); +#27585 = VECTOR('',#27586,1.); +#27586 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27587 = ORIENTED_EDGE('',*,*,#27588,.F.); +#27588 = EDGE_CURVE('',#22910,#27581,#27589,.T.); +#27589 = LINE('',#27590,#27591); +#27590 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#27591 = VECTOR('',#27592,1.); +#27592 = DIRECTION('',(0.,-0.,-1.)); +#27593 = ORIENTED_EDGE('',*,*,#22917,.F.); +#27594 = PLANE('',#27595); +#27595 = AXIS2_PLACEMENT_3D('',#27596,#27597,#27598); +#27596 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#27597 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27598 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27599 = ADVANCED_FACE('',(#27600),#27650,.F.); +#27600 = FACE_BOUND('',#27601,.F.); +#27601 = EDGE_LOOP('',(#27602,#27603,#27604,#27612,#27620,#27628,#27636, + #27644)); +#27602 = ORIENTED_EDGE('',*,*,#22941,.F.); +#27603 = ORIENTED_EDGE('',*,*,#27588,.T.); +#27604 = ORIENTED_EDGE('',*,*,#27605,.T.); +#27605 = EDGE_CURVE('',#27581,#27606,#27608,.T.); +#27606 = VERTEX_POINT('',#27607); +#27607 = CARTESIAN_POINT('',(0.1,-40.34,0.9)); +#27608 = LINE('',#27609,#27610); +#27609 = CARTESIAN_POINT('',(0.3,-40.34,0.9)); +#27610 = VECTOR('',#27611,1.); +#27611 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27612 = ORIENTED_EDGE('',*,*,#27613,.T.); +#27613 = EDGE_CURVE('',#27606,#27614,#27616,.T.); +#27614 = VERTEX_POINT('',#27615); +#27615 = CARTESIAN_POINT('',(0.1,-40.34,7.4)); +#27616 = LINE('',#27617,#27618); +#27617 = CARTESIAN_POINT('',(0.1,-40.34,6.055738799212)); +#27618 = VECTOR('',#27619,1.); +#27619 = DIRECTION('',(0.,-0.,1.)); +#27620 = ORIENTED_EDGE('',*,*,#27621,.F.); +#27621 = EDGE_CURVE('',#27622,#27614,#27624,.T.); +#27622 = VERTEX_POINT('',#27623); +#27623 = CARTESIAN_POINT('',(-0.1,-40.34,7.4)); +#27624 = LINE('',#27625,#27626); +#27625 = CARTESIAN_POINT('',(-0.1,-40.34,7.4)); +#27626 = VECTOR('',#27627,1.); +#27627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27628 = ORIENTED_EDGE('',*,*,#27629,.F.); +#27629 = EDGE_CURVE('',#27630,#27622,#27632,.T.); +#27630 = VERTEX_POINT('',#27631); +#27631 = CARTESIAN_POINT('',(-0.1,-40.34,0.9)); +#27632 = LINE('',#27633,#27634); +#27633 = CARTESIAN_POINT('',(-0.1,-40.34,6.055738799212)); +#27634 = VECTOR('',#27635,1.); +#27635 = DIRECTION('',(0.,-0.,1.)); +#27636 = ORIENTED_EDGE('',*,*,#27637,.T.); +#27637 = EDGE_CURVE('',#27630,#27638,#27640,.T.); +#27638 = VERTEX_POINT('',#27639); +#27639 = CARTESIAN_POINT('',(-0.3,-40.34,0.9)); +#27640 = LINE('',#27641,#27642); +#27641 = CARTESIAN_POINT('',(0.3,-40.34,0.9)); +#27642 = VECTOR('',#27643,1.); +#27643 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27644 = ORIENTED_EDGE('',*,*,#27645,.F.); +#27645 = EDGE_CURVE('',#22934,#27638,#27646,.T.); +#27646 = LINE('',#27647,#27648); +#27647 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#27648 = VECTOR('',#27649,1.); +#27649 = DIRECTION('',(0.,-0.,-1.)); +#27650 = PLANE('',#27651); +#27651 = AXIS2_PLACEMENT_3D('',#27652,#27653,#27654); +#27652 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#27653 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27654 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27655 = ADVANCED_FACE('',(#27656),#27674,.F.); +#27656 = FACE_BOUND('',#27657,.F.); +#27657 = EDGE_LOOP('',(#27658,#27659,#27667,#27673)); +#27658 = ORIENTED_EDGE('',*,*,#27645,.T.); +#27659 = ORIENTED_EDGE('',*,*,#27660,.T.); +#27660 = EDGE_CURVE('',#27638,#27661,#27663,.T.); +#27661 = VERTEX_POINT('',#27662); +#27662 = CARTESIAN_POINT('',(-0.3,-40.94,0.9)); +#27663 = LINE('',#27664,#27665); +#27664 = CARTESIAN_POINT('',(-0.3,-40.34,0.9)); +#27665 = VECTOR('',#27666,1.); +#27666 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27667 = ORIENTED_EDGE('',*,*,#27668,.F.); +#27668 = EDGE_CURVE('',#22958,#27661,#27669,.T.); +#27669 = LINE('',#27670,#27671); +#27670 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#27671 = VECTOR('',#27672,1.); +#27672 = DIRECTION('',(0.,-0.,-1.)); +#27673 = ORIENTED_EDGE('',*,*,#22965,.F.); +#27674 = PLANE('',#27675); +#27675 = AXIS2_PLACEMENT_3D('',#27676,#27677,#27678); +#27676 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#27677 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27678 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27679 = ADVANCED_FACE('',(#27680),#27723,.F.); +#27680 = FACE_BOUND('',#27681,.F.); +#27681 = EDGE_LOOP('',(#27682,#27683,#27684,#27692,#27700,#27708,#27716, + #27722)); +#27682 = ORIENTED_EDGE('',*,*,#22982,.F.); +#27683 = ORIENTED_EDGE('',*,*,#27668,.T.); +#27684 = ORIENTED_EDGE('',*,*,#27685,.T.); +#27685 = EDGE_CURVE('',#27661,#27686,#27688,.T.); +#27686 = VERTEX_POINT('',#27687); +#27687 = CARTESIAN_POINT('',(-0.1,-40.94,0.9)); +#27688 = LINE('',#27689,#27690); +#27689 = CARTESIAN_POINT('',(-0.3,-40.94,0.9)); +#27690 = VECTOR('',#27691,1.); +#27691 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27692 = ORIENTED_EDGE('',*,*,#27693,.F.); +#27693 = EDGE_CURVE('',#27694,#27686,#27696,.T.); +#27694 = VERTEX_POINT('',#27695); +#27695 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#27696 = LINE('',#27697,#27698); +#27697 = CARTESIAN_POINT('',(-0.1,-40.94,6.055738799212)); +#27698 = VECTOR('',#27699,1.); +#27699 = DIRECTION('',(-0.,0.,-1.)); +#27700 = ORIENTED_EDGE('',*,*,#27701,.T.); +#27701 = EDGE_CURVE('',#27694,#27702,#27704,.T.); +#27702 = VERTEX_POINT('',#27703); +#27703 = CARTESIAN_POINT('',(0.1,-40.94,7.4)); +#27704 = LINE('',#27705,#27706); +#27705 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#27706 = VECTOR('',#27707,1.); +#27707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27708 = ORIENTED_EDGE('',*,*,#27709,.T.); +#27709 = EDGE_CURVE('',#27702,#27710,#27712,.T.); +#27710 = VERTEX_POINT('',#27711); +#27711 = CARTESIAN_POINT('',(0.1,-40.94,0.9)); +#27712 = LINE('',#27713,#27714); +#27713 = CARTESIAN_POINT('',(0.1,-40.94,6.055738799212)); +#27714 = VECTOR('',#27715,1.); +#27715 = DIRECTION('',(-0.,0.,-1.)); +#27716 = ORIENTED_EDGE('',*,*,#27717,.T.); +#27717 = EDGE_CURVE('',#27710,#27573,#27718,.T.); +#27718 = LINE('',#27719,#27720); +#27719 = CARTESIAN_POINT('',(-0.3,-40.94,0.9)); +#27720 = VECTOR('',#27721,1.); +#27721 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27722 = ORIENTED_EDGE('',*,*,#27572,.F.); +#27723 = PLANE('',#27724); +#27724 = AXIS2_PLACEMENT_3D('',#27725,#27726,#27727); +#27725 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#27726 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27727 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27728 = ADVANCED_FACE('',(#27729),#27754,.F.); +#27729 = FACE_BOUND('',#27730,.F.); +#27730 = EDGE_LOOP('',(#27731,#27739,#27747,#27753)); +#27731 = ORIENTED_EDGE('',*,*,#27732,.T.); +#27732 = EDGE_CURVE('',#22997,#27733,#27735,.T.); +#27733 = VERTEX_POINT('',#27734); +#27734 = CARTESIAN_POINT('',(0.3,-38.4,0.9)); +#27735 = LINE('',#27736,#27737); +#27736 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#27737 = VECTOR('',#27738,1.); +#27738 = DIRECTION('',(0.,-0.,-1.)); +#27739 = ORIENTED_EDGE('',*,*,#27740,.T.); +#27740 = EDGE_CURVE('',#27733,#27741,#27743,.T.); +#27741 = VERTEX_POINT('',#27742); +#27742 = CARTESIAN_POINT('',(0.3,-37.8,0.9)); +#27743 = LINE('',#27744,#27745); +#27744 = CARTESIAN_POINT('',(0.3,-38.4,0.9)); +#27745 = VECTOR('',#27746,1.); +#27746 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27747 = ORIENTED_EDGE('',*,*,#27748,.F.); +#27748 = EDGE_CURVE('',#23006,#27741,#27749,.T.); +#27749 = LINE('',#27750,#27751); +#27750 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#27751 = VECTOR('',#27752,1.); +#27752 = DIRECTION('',(0.,-0.,-1.)); +#27753 = ORIENTED_EDGE('',*,*,#23013,.F.); +#27754 = PLANE('',#27755); +#27755 = AXIS2_PLACEMENT_3D('',#27756,#27757,#27758); +#27756 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#27757 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27758 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27759 = ADVANCED_FACE('',(#27760),#27810,.F.); +#27760 = FACE_BOUND('',#27761,.F.); +#27761 = EDGE_LOOP('',(#27762,#27763,#27764,#27772,#27780,#27788,#27796, + #27804)); +#27762 = ORIENTED_EDGE('',*,*,#23037,.F.); +#27763 = ORIENTED_EDGE('',*,*,#27748,.T.); +#27764 = ORIENTED_EDGE('',*,*,#27765,.T.); +#27765 = EDGE_CURVE('',#27741,#27766,#27768,.T.); +#27766 = VERTEX_POINT('',#27767); +#27767 = CARTESIAN_POINT('',(0.1,-37.8,0.9)); +#27768 = LINE('',#27769,#27770); +#27769 = CARTESIAN_POINT('',(0.3,-37.8,0.9)); +#27770 = VECTOR('',#27771,1.); +#27771 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27772 = ORIENTED_EDGE('',*,*,#27773,.T.); +#27773 = EDGE_CURVE('',#27766,#27774,#27776,.T.); +#27774 = VERTEX_POINT('',#27775); +#27775 = CARTESIAN_POINT('',(0.1,-37.8,7.4)); +#27776 = LINE('',#27777,#27778); +#27777 = CARTESIAN_POINT('',(0.1,-37.8,6.055738799212)); +#27778 = VECTOR('',#27779,1.); +#27779 = DIRECTION('',(0.,-0.,1.)); +#27780 = ORIENTED_EDGE('',*,*,#27781,.F.); +#27781 = EDGE_CURVE('',#27782,#27774,#27784,.T.); +#27782 = VERTEX_POINT('',#27783); +#27783 = CARTESIAN_POINT('',(-0.1,-37.8,7.4)); +#27784 = LINE('',#27785,#27786); +#27785 = CARTESIAN_POINT('',(-0.1,-37.8,7.4)); +#27786 = VECTOR('',#27787,1.); +#27787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27788 = ORIENTED_EDGE('',*,*,#27789,.F.); +#27789 = EDGE_CURVE('',#27790,#27782,#27792,.T.); +#27790 = VERTEX_POINT('',#27791); +#27791 = CARTESIAN_POINT('',(-0.1,-37.8,0.9)); +#27792 = LINE('',#27793,#27794); +#27793 = CARTESIAN_POINT('',(-0.1,-37.8,6.055738799212)); +#27794 = VECTOR('',#27795,1.); +#27795 = DIRECTION('',(0.,-0.,1.)); +#27796 = ORIENTED_EDGE('',*,*,#27797,.T.); +#27797 = EDGE_CURVE('',#27790,#27798,#27800,.T.); +#27798 = VERTEX_POINT('',#27799); +#27799 = CARTESIAN_POINT('',(-0.3,-37.8,0.9)); +#27800 = LINE('',#27801,#27802); +#27801 = CARTESIAN_POINT('',(0.3,-37.8,0.9)); +#27802 = VECTOR('',#27803,1.); +#27803 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27804 = ORIENTED_EDGE('',*,*,#27805,.F.); +#27805 = EDGE_CURVE('',#23030,#27798,#27806,.T.); +#27806 = LINE('',#27807,#27808); +#27807 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#27808 = VECTOR('',#27809,1.); +#27809 = DIRECTION('',(0.,-0.,-1.)); +#27810 = PLANE('',#27811); +#27811 = AXIS2_PLACEMENT_3D('',#27812,#27813,#27814); +#27812 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#27813 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27814 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27815 = ADVANCED_FACE('',(#27816),#27834,.F.); +#27816 = FACE_BOUND('',#27817,.F.); +#27817 = EDGE_LOOP('',(#27818,#27819,#27827,#27833)); +#27818 = ORIENTED_EDGE('',*,*,#27805,.T.); +#27819 = ORIENTED_EDGE('',*,*,#27820,.T.); +#27820 = EDGE_CURVE('',#27798,#27821,#27823,.T.); +#27821 = VERTEX_POINT('',#27822); +#27822 = CARTESIAN_POINT('',(-0.3,-38.4,0.9)); +#27823 = LINE('',#27824,#27825); +#27824 = CARTESIAN_POINT('',(-0.3,-37.8,0.9)); +#27825 = VECTOR('',#27826,1.); +#27826 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27827 = ORIENTED_EDGE('',*,*,#27828,.F.); +#27828 = EDGE_CURVE('',#23054,#27821,#27829,.T.); +#27829 = LINE('',#27830,#27831); +#27830 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#27831 = VECTOR('',#27832,1.); +#27832 = DIRECTION('',(0.,-0.,-1.)); +#27833 = ORIENTED_EDGE('',*,*,#23061,.F.); +#27834 = PLANE('',#27835); +#27835 = AXIS2_PLACEMENT_3D('',#27836,#27837,#27838); +#27836 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#27837 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27838 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27839 = ADVANCED_FACE('',(#27840),#27883,.F.); +#27840 = FACE_BOUND('',#27841,.F.); +#27841 = EDGE_LOOP('',(#27842,#27843,#27844,#27852,#27860,#27868,#27876, + #27882)); +#27842 = ORIENTED_EDGE('',*,*,#23078,.F.); +#27843 = ORIENTED_EDGE('',*,*,#27828,.T.); +#27844 = ORIENTED_EDGE('',*,*,#27845,.T.); +#27845 = EDGE_CURVE('',#27821,#27846,#27848,.T.); +#27846 = VERTEX_POINT('',#27847); +#27847 = CARTESIAN_POINT('',(-0.1,-38.4,0.9)); +#27848 = LINE('',#27849,#27850); +#27849 = CARTESIAN_POINT('',(-0.3,-38.4,0.9)); +#27850 = VECTOR('',#27851,1.); +#27851 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27852 = ORIENTED_EDGE('',*,*,#27853,.F.); +#27853 = EDGE_CURVE('',#27854,#27846,#27856,.T.); +#27854 = VERTEX_POINT('',#27855); +#27855 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#27856 = LINE('',#27857,#27858); +#27857 = CARTESIAN_POINT('',(-0.1,-38.4,6.055738799212)); +#27858 = VECTOR('',#27859,1.); +#27859 = DIRECTION('',(-0.,0.,-1.)); +#27860 = ORIENTED_EDGE('',*,*,#27861,.T.); +#27861 = EDGE_CURVE('',#27854,#27862,#27864,.T.); +#27862 = VERTEX_POINT('',#27863); +#27863 = CARTESIAN_POINT('',(0.1,-38.4,7.4)); +#27864 = LINE('',#27865,#27866); +#27865 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#27866 = VECTOR('',#27867,1.); +#27867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27868 = ORIENTED_EDGE('',*,*,#27869,.T.); +#27869 = EDGE_CURVE('',#27862,#27870,#27872,.T.); +#27870 = VERTEX_POINT('',#27871); +#27871 = CARTESIAN_POINT('',(0.1,-38.4,0.9)); +#27872 = LINE('',#27873,#27874); +#27873 = CARTESIAN_POINT('',(0.1,-38.4,6.055738799212)); +#27874 = VECTOR('',#27875,1.); +#27875 = DIRECTION('',(-0.,0.,-1.)); +#27876 = ORIENTED_EDGE('',*,*,#27877,.T.); +#27877 = EDGE_CURVE('',#27870,#27733,#27878,.T.); +#27878 = LINE('',#27879,#27880); +#27879 = CARTESIAN_POINT('',(-0.3,-38.4,0.9)); +#27880 = VECTOR('',#27881,1.); +#27881 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27882 = ORIENTED_EDGE('',*,*,#27732,.F.); +#27883 = PLANE('',#27884); +#27884 = AXIS2_PLACEMENT_3D('',#27885,#27886,#27887); +#27885 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#27886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27887 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27888 = ADVANCED_FACE('',(#27889),#27914,.F.); +#27889 = FACE_BOUND('',#27890,.F.); +#27890 = EDGE_LOOP('',(#27891,#27899,#27907,#27913)); +#27891 = ORIENTED_EDGE('',*,*,#27892,.T.); +#27892 = EDGE_CURVE('',#23093,#27893,#27895,.T.); +#27893 = VERTEX_POINT('',#27894); +#27894 = CARTESIAN_POINT('',(0.3,-35.86,0.9)); +#27895 = LINE('',#27896,#27897); +#27896 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#27897 = VECTOR('',#27898,1.); +#27898 = DIRECTION('',(0.,-0.,-1.)); +#27899 = ORIENTED_EDGE('',*,*,#27900,.T.); +#27900 = EDGE_CURVE('',#27893,#27901,#27903,.T.); +#27901 = VERTEX_POINT('',#27902); +#27902 = CARTESIAN_POINT('',(0.3,-35.26,0.9)); +#27903 = LINE('',#27904,#27905); +#27904 = CARTESIAN_POINT('',(0.3,-35.86,0.9)); +#27905 = VECTOR('',#27906,1.); +#27906 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27907 = ORIENTED_EDGE('',*,*,#27908,.F.); +#27908 = EDGE_CURVE('',#23102,#27901,#27909,.T.); +#27909 = LINE('',#27910,#27911); +#27910 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#27911 = VECTOR('',#27912,1.); +#27912 = DIRECTION('',(0.,-0.,-1.)); +#27913 = ORIENTED_EDGE('',*,*,#23109,.F.); +#27914 = PLANE('',#27915); +#27915 = AXIS2_PLACEMENT_3D('',#27916,#27917,#27918); +#27916 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#27917 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27918 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27919 = ADVANCED_FACE('',(#27920),#27970,.F.); +#27920 = FACE_BOUND('',#27921,.F.); +#27921 = EDGE_LOOP('',(#27922,#27923,#27924,#27932,#27940,#27948,#27956, + #27964)); +#27922 = ORIENTED_EDGE('',*,*,#23133,.F.); +#27923 = ORIENTED_EDGE('',*,*,#27908,.T.); +#27924 = ORIENTED_EDGE('',*,*,#27925,.T.); +#27925 = EDGE_CURVE('',#27901,#27926,#27928,.T.); +#27926 = VERTEX_POINT('',#27927); +#27927 = CARTESIAN_POINT('',(0.1,-35.26,0.9)); +#27928 = LINE('',#27929,#27930); +#27929 = CARTESIAN_POINT('',(0.3,-35.26,0.9)); +#27930 = VECTOR('',#27931,1.); +#27931 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27932 = ORIENTED_EDGE('',*,*,#27933,.T.); +#27933 = EDGE_CURVE('',#27926,#27934,#27936,.T.); +#27934 = VERTEX_POINT('',#27935); +#27935 = CARTESIAN_POINT('',(0.1,-35.26,7.4)); +#27936 = LINE('',#27937,#27938); +#27937 = CARTESIAN_POINT('',(0.1,-35.26,6.055738799212)); +#27938 = VECTOR('',#27939,1.); +#27939 = DIRECTION('',(0.,-0.,1.)); +#27940 = ORIENTED_EDGE('',*,*,#27941,.F.); +#27941 = EDGE_CURVE('',#27942,#27934,#27944,.T.); +#27942 = VERTEX_POINT('',#27943); +#27943 = CARTESIAN_POINT('',(-0.1,-35.26,7.4)); +#27944 = LINE('',#27945,#27946); +#27945 = CARTESIAN_POINT('',(-0.1,-35.26,7.4)); +#27946 = VECTOR('',#27947,1.); +#27947 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27948 = ORIENTED_EDGE('',*,*,#27949,.F.); +#27949 = EDGE_CURVE('',#27950,#27942,#27952,.T.); +#27950 = VERTEX_POINT('',#27951); +#27951 = CARTESIAN_POINT('',(-0.1,-35.26,0.9)); +#27952 = LINE('',#27953,#27954); +#27953 = CARTESIAN_POINT('',(-0.1,-35.26,6.055738799212)); +#27954 = VECTOR('',#27955,1.); +#27955 = DIRECTION('',(0.,-0.,1.)); +#27956 = ORIENTED_EDGE('',*,*,#27957,.T.); +#27957 = EDGE_CURVE('',#27950,#27958,#27960,.T.); +#27958 = VERTEX_POINT('',#27959); +#27959 = CARTESIAN_POINT('',(-0.3,-35.26,0.9)); +#27960 = LINE('',#27961,#27962); +#27961 = CARTESIAN_POINT('',(0.3,-35.26,0.9)); +#27962 = VECTOR('',#27963,1.); +#27963 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27964 = ORIENTED_EDGE('',*,*,#27965,.F.); +#27965 = EDGE_CURVE('',#23126,#27958,#27966,.T.); +#27966 = LINE('',#27967,#27968); +#27967 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#27968 = VECTOR('',#27969,1.); +#27969 = DIRECTION('',(0.,-0.,-1.)); +#27970 = PLANE('',#27971); +#27971 = AXIS2_PLACEMENT_3D('',#27972,#27973,#27974); +#27972 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#27973 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27974 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27975 = ADVANCED_FACE('',(#27976),#27994,.F.); +#27976 = FACE_BOUND('',#27977,.F.); +#27977 = EDGE_LOOP('',(#27978,#27979,#27987,#27993)); +#27978 = ORIENTED_EDGE('',*,*,#27965,.T.); +#27979 = ORIENTED_EDGE('',*,*,#27980,.T.); +#27980 = EDGE_CURVE('',#27958,#27981,#27983,.T.); +#27981 = VERTEX_POINT('',#27982); +#27982 = CARTESIAN_POINT('',(-0.3,-35.86,0.9)); +#27983 = LINE('',#27984,#27985); +#27984 = CARTESIAN_POINT('',(-0.3,-35.26,0.9)); +#27985 = VECTOR('',#27986,1.); +#27986 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27987 = ORIENTED_EDGE('',*,*,#27988,.F.); +#27988 = EDGE_CURVE('',#23150,#27981,#27989,.T.); +#27989 = LINE('',#27990,#27991); +#27990 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#27991 = VECTOR('',#27992,1.); +#27992 = DIRECTION('',(0.,-0.,-1.)); +#27993 = ORIENTED_EDGE('',*,*,#23157,.F.); +#27994 = PLANE('',#27995); +#27995 = AXIS2_PLACEMENT_3D('',#27996,#27997,#27998); +#27996 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#27997 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27998 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27999 = ADVANCED_FACE('',(#28000),#28043,.F.); +#28000 = FACE_BOUND('',#28001,.F.); +#28001 = EDGE_LOOP('',(#28002,#28003,#28004,#28012,#28020,#28028,#28036, + #28042)); +#28002 = ORIENTED_EDGE('',*,*,#23174,.F.); +#28003 = ORIENTED_EDGE('',*,*,#27988,.T.); +#28004 = ORIENTED_EDGE('',*,*,#28005,.T.); +#28005 = EDGE_CURVE('',#27981,#28006,#28008,.T.); +#28006 = VERTEX_POINT('',#28007); +#28007 = CARTESIAN_POINT('',(-0.1,-35.86,0.9)); +#28008 = LINE('',#28009,#28010); +#28009 = CARTESIAN_POINT('',(-0.3,-35.86,0.9)); +#28010 = VECTOR('',#28011,1.); +#28011 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28012 = ORIENTED_EDGE('',*,*,#28013,.F.); +#28013 = EDGE_CURVE('',#28014,#28006,#28016,.T.); +#28014 = VERTEX_POINT('',#28015); +#28015 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#28016 = LINE('',#28017,#28018); +#28017 = CARTESIAN_POINT('',(-0.1,-35.86,6.055738799212)); +#28018 = VECTOR('',#28019,1.); +#28019 = DIRECTION('',(-0.,0.,-1.)); +#28020 = ORIENTED_EDGE('',*,*,#28021,.T.); +#28021 = EDGE_CURVE('',#28014,#28022,#28024,.T.); +#28022 = VERTEX_POINT('',#28023); +#28023 = CARTESIAN_POINT('',(0.1,-35.86,7.4)); +#28024 = LINE('',#28025,#28026); +#28025 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#28026 = VECTOR('',#28027,1.); +#28027 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28028 = ORIENTED_EDGE('',*,*,#28029,.T.); +#28029 = EDGE_CURVE('',#28022,#28030,#28032,.T.); +#28030 = VERTEX_POINT('',#28031); +#28031 = CARTESIAN_POINT('',(0.1,-35.86,0.9)); +#28032 = LINE('',#28033,#28034); +#28033 = CARTESIAN_POINT('',(0.1,-35.86,6.055738799212)); +#28034 = VECTOR('',#28035,1.); +#28035 = DIRECTION('',(-0.,0.,-1.)); +#28036 = ORIENTED_EDGE('',*,*,#28037,.T.); +#28037 = EDGE_CURVE('',#28030,#27893,#28038,.T.); +#28038 = LINE('',#28039,#28040); +#28039 = CARTESIAN_POINT('',(-0.3,-35.86,0.9)); +#28040 = VECTOR('',#28041,1.); +#28041 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28042 = ORIENTED_EDGE('',*,*,#27892,.F.); +#28043 = PLANE('',#28044); +#28044 = AXIS2_PLACEMENT_3D('',#28045,#28046,#28047); +#28045 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#28046 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28047 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28048 = ADVANCED_FACE('',(#28049),#28074,.F.); +#28049 = FACE_BOUND('',#28050,.F.); +#28050 = EDGE_LOOP('',(#28051,#28059,#28067,#28073)); +#28051 = ORIENTED_EDGE('',*,*,#28052,.T.); +#28052 = EDGE_CURVE('',#23189,#28053,#28055,.T.); +#28053 = VERTEX_POINT('',#28054); +#28054 = CARTESIAN_POINT('',(0.3,-33.32,0.9)); +#28055 = LINE('',#28056,#28057); +#28056 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#28057 = VECTOR('',#28058,1.); +#28058 = DIRECTION('',(0.,-0.,-1.)); +#28059 = ORIENTED_EDGE('',*,*,#28060,.T.); +#28060 = EDGE_CURVE('',#28053,#28061,#28063,.T.); +#28061 = VERTEX_POINT('',#28062); +#28062 = CARTESIAN_POINT('',(0.3,-32.72,0.9)); +#28063 = LINE('',#28064,#28065); +#28064 = CARTESIAN_POINT('',(0.3,-33.32,0.9)); +#28065 = VECTOR('',#28066,1.); +#28066 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28067 = ORIENTED_EDGE('',*,*,#28068,.F.); +#28068 = EDGE_CURVE('',#23198,#28061,#28069,.T.); +#28069 = LINE('',#28070,#28071); +#28070 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#28071 = VECTOR('',#28072,1.); +#28072 = DIRECTION('',(0.,-0.,-1.)); +#28073 = ORIENTED_EDGE('',*,*,#23205,.F.); +#28074 = PLANE('',#28075); +#28075 = AXIS2_PLACEMENT_3D('',#28076,#28077,#28078); +#28076 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#28077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28078 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28079 = ADVANCED_FACE('',(#28080),#28130,.F.); +#28080 = FACE_BOUND('',#28081,.F.); +#28081 = EDGE_LOOP('',(#28082,#28083,#28084,#28092,#28100,#28108,#28116, + #28124)); +#28082 = ORIENTED_EDGE('',*,*,#23229,.F.); +#28083 = ORIENTED_EDGE('',*,*,#28068,.T.); +#28084 = ORIENTED_EDGE('',*,*,#28085,.T.); +#28085 = EDGE_CURVE('',#28061,#28086,#28088,.T.); +#28086 = VERTEX_POINT('',#28087); +#28087 = CARTESIAN_POINT('',(0.1,-32.72,0.9)); +#28088 = LINE('',#28089,#28090); +#28089 = CARTESIAN_POINT('',(0.3,-32.72,0.9)); +#28090 = VECTOR('',#28091,1.); +#28091 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28092 = ORIENTED_EDGE('',*,*,#28093,.T.); +#28093 = EDGE_CURVE('',#28086,#28094,#28096,.T.); +#28094 = VERTEX_POINT('',#28095); +#28095 = CARTESIAN_POINT('',(0.1,-32.72,7.4)); +#28096 = LINE('',#28097,#28098); +#28097 = CARTESIAN_POINT('',(0.1,-32.72,6.055738799212)); +#28098 = VECTOR('',#28099,1.); +#28099 = DIRECTION('',(0.,-0.,1.)); +#28100 = ORIENTED_EDGE('',*,*,#28101,.F.); +#28101 = EDGE_CURVE('',#28102,#28094,#28104,.T.); +#28102 = VERTEX_POINT('',#28103); +#28103 = CARTESIAN_POINT('',(-0.1,-32.72,7.4)); +#28104 = LINE('',#28105,#28106); +#28105 = CARTESIAN_POINT('',(-0.1,-32.72,7.4)); +#28106 = VECTOR('',#28107,1.); +#28107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28108 = ORIENTED_EDGE('',*,*,#28109,.F.); +#28109 = EDGE_CURVE('',#28110,#28102,#28112,.T.); +#28110 = VERTEX_POINT('',#28111); +#28111 = CARTESIAN_POINT('',(-0.1,-32.72,0.9)); +#28112 = LINE('',#28113,#28114); +#28113 = CARTESIAN_POINT('',(-0.1,-32.72,6.055738799212)); +#28114 = VECTOR('',#28115,1.); +#28115 = DIRECTION('',(0.,-0.,1.)); +#28116 = ORIENTED_EDGE('',*,*,#28117,.T.); +#28117 = EDGE_CURVE('',#28110,#28118,#28120,.T.); +#28118 = VERTEX_POINT('',#28119); +#28119 = CARTESIAN_POINT('',(-0.3,-32.72,0.9)); +#28120 = LINE('',#28121,#28122); +#28121 = CARTESIAN_POINT('',(0.3,-32.72,0.9)); +#28122 = VECTOR('',#28123,1.); +#28123 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28124 = ORIENTED_EDGE('',*,*,#28125,.F.); +#28125 = EDGE_CURVE('',#23222,#28118,#28126,.T.); +#28126 = LINE('',#28127,#28128); +#28127 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#28128 = VECTOR('',#28129,1.); +#28129 = DIRECTION('',(0.,-0.,-1.)); +#28130 = PLANE('',#28131); +#28131 = AXIS2_PLACEMENT_3D('',#28132,#28133,#28134); +#28132 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#28133 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28134 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28135 = ADVANCED_FACE('',(#28136),#28154,.F.); +#28136 = FACE_BOUND('',#28137,.F.); +#28137 = EDGE_LOOP('',(#28138,#28139,#28147,#28153)); +#28138 = ORIENTED_EDGE('',*,*,#28125,.T.); +#28139 = ORIENTED_EDGE('',*,*,#28140,.T.); +#28140 = EDGE_CURVE('',#28118,#28141,#28143,.T.); +#28141 = VERTEX_POINT('',#28142); +#28142 = CARTESIAN_POINT('',(-0.3,-33.32,0.9)); +#28143 = LINE('',#28144,#28145); +#28144 = CARTESIAN_POINT('',(-0.3,-32.72,0.9)); +#28145 = VECTOR('',#28146,1.); +#28146 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28147 = ORIENTED_EDGE('',*,*,#28148,.F.); +#28148 = EDGE_CURVE('',#23246,#28141,#28149,.T.); +#28149 = LINE('',#28150,#28151); +#28150 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#28151 = VECTOR('',#28152,1.); +#28152 = DIRECTION('',(0.,-0.,-1.)); +#28153 = ORIENTED_EDGE('',*,*,#23253,.F.); +#28154 = PLANE('',#28155); +#28155 = AXIS2_PLACEMENT_3D('',#28156,#28157,#28158); +#28156 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#28157 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28158 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28159 = ADVANCED_FACE('',(#28160),#28203,.F.); +#28160 = FACE_BOUND('',#28161,.F.); +#28161 = EDGE_LOOP('',(#28162,#28163,#28164,#28172,#28180,#28188,#28196, + #28202)); +#28162 = ORIENTED_EDGE('',*,*,#23270,.F.); +#28163 = ORIENTED_EDGE('',*,*,#28148,.T.); +#28164 = ORIENTED_EDGE('',*,*,#28165,.T.); +#28165 = EDGE_CURVE('',#28141,#28166,#28168,.T.); +#28166 = VERTEX_POINT('',#28167); +#28167 = CARTESIAN_POINT('',(-0.1,-33.32,0.9)); +#28168 = LINE('',#28169,#28170); +#28169 = CARTESIAN_POINT('',(-0.3,-33.32,0.9)); +#28170 = VECTOR('',#28171,1.); +#28171 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28172 = ORIENTED_EDGE('',*,*,#28173,.F.); +#28173 = EDGE_CURVE('',#28174,#28166,#28176,.T.); +#28174 = VERTEX_POINT('',#28175); +#28175 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#28176 = LINE('',#28177,#28178); +#28177 = CARTESIAN_POINT('',(-0.1,-33.32,6.055738799212)); +#28178 = VECTOR('',#28179,1.); +#28179 = DIRECTION('',(-0.,0.,-1.)); +#28180 = ORIENTED_EDGE('',*,*,#28181,.T.); +#28181 = EDGE_CURVE('',#28174,#28182,#28184,.T.); +#28182 = VERTEX_POINT('',#28183); +#28183 = CARTESIAN_POINT('',(0.1,-33.32,7.4)); +#28184 = LINE('',#28185,#28186); +#28185 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#28186 = VECTOR('',#28187,1.); +#28187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28188 = ORIENTED_EDGE('',*,*,#28189,.T.); +#28189 = EDGE_CURVE('',#28182,#28190,#28192,.T.); +#28190 = VERTEX_POINT('',#28191); +#28191 = CARTESIAN_POINT('',(0.1,-33.32,0.9)); +#28192 = LINE('',#28193,#28194); +#28193 = CARTESIAN_POINT('',(0.1,-33.32,6.055738799212)); +#28194 = VECTOR('',#28195,1.); +#28195 = DIRECTION('',(-0.,0.,-1.)); +#28196 = ORIENTED_EDGE('',*,*,#28197,.T.); +#28197 = EDGE_CURVE('',#28190,#28053,#28198,.T.); +#28198 = LINE('',#28199,#28200); +#28199 = CARTESIAN_POINT('',(-0.3,-33.32,0.9)); +#28200 = VECTOR('',#28201,1.); +#28201 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28202 = ORIENTED_EDGE('',*,*,#28052,.F.); +#28203 = PLANE('',#28204); +#28204 = AXIS2_PLACEMENT_3D('',#28205,#28206,#28207); +#28205 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#28206 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28207 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28208 = ADVANCED_FACE('',(#28209),#28234,.F.); +#28209 = FACE_BOUND('',#28210,.F.); +#28210 = EDGE_LOOP('',(#28211,#28219,#28227,#28233)); +#28211 = ORIENTED_EDGE('',*,*,#28212,.T.); +#28212 = EDGE_CURVE('',#23285,#28213,#28215,.T.); +#28213 = VERTEX_POINT('',#28214); +#28214 = CARTESIAN_POINT('',(0.3,-30.78,0.9)); +#28215 = LINE('',#28216,#28217); +#28216 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#28217 = VECTOR('',#28218,1.); +#28218 = DIRECTION('',(0.,-0.,-1.)); +#28219 = ORIENTED_EDGE('',*,*,#28220,.T.); +#28220 = EDGE_CURVE('',#28213,#28221,#28223,.T.); +#28221 = VERTEX_POINT('',#28222); +#28222 = CARTESIAN_POINT('',(0.3,-30.18,0.9)); +#28223 = LINE('',#28224,#28225); +#28224 = CARTESIAN_POINT('',(0.3,-30.78,0.9)); +#28225 = VECTOR('',#28226,1.); +#28226 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28227 = ORIENTED_EDGE('',*,*,#28228,.F.); +#28228 = EDGE_CURVE('',#23294,#28221,#28229,.T.); +#28229 = LINE('',#28230,#28231); +#28230 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#28231 = VECTOR('',#28232,1.); +#28232 = DIRECTION('',(0.,-0.,-1.)); +#28233 = ORIENTED_EDGE('',*,*,#23301,.F.); +#28234 = PLANE('',#28235); +#28235 = AXIS2_PLACEMENT_3D('',#28236,#28237,#28238); +#28236 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#28237 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28238 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28239 = ADVANCED_FACE('',(#28240),#28290,.F.); +#28240 = FACE_BOUND('',#28241,.F.); +#28241 = EDGE_LOOP('',(#28242,#28243,#28244,#28252,#28260,#28268,#28276, + #28284)); +#28242 = ORIENTED_EDGE('',*,*,#23325,.F.); +#28243 = ORIENTED_EDGE('',*,*,#28228,.T.); +#28244 = ORIENTED_EDGE('',*,*,#28245,.T.); +#28245 = EDGE_CURVE('',#28221,#28246,#28248,.T.); +#28246 = VERTEX_POINT('',#28247); +#28247 = CARTESIAN_POINT('',(0.1,-30.18,0.9)); +#28248 = LINE('',#28249,#28250); +#28249 = CARTESIAN_POINT('',(0.3,-30.18,0.9)); +#28250 = VECTOR('',#28251,1.); +#28251 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28252 = ORIENTED_EDGE('',*,*,#28253,.T.); +#28253 = EDGE_CURVE('',#28246,#28254,#28256,.T.); +#28254 = VERTEX_POINT('',#28255); +#28255 = CARTESIAN_POINT('',(0.1,-30.18,7.4)); +#28256 = LINE('',#28257,#28258); +#28257 = CARTESIAN_POINT('',(0.1,-30.18,6.055738799212)); +#28258 = VECTOR('',#28259,1.); +#28259 = DIRECTION('',(0.,-0.,1.)); +#28260 = ORIENTED_EDGE('',*,*,#28261,.F.); +#28261 = EDGE_CURVE('',#28262,#28254,#28264,.T.); +#28262 = VERTEX_POINT('',#28263); +#28263 = CARTESIAN_POINT('',(-0.1,-30.18,7.4)); +#28264 = LINE('',#28265,#28266); +#28265 = CARTESIAN_POINT('',(-0.1,-30.18,7.4)); +#28266 = VECTOR('',#28267,1.); +#28267 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28268 = ORIENTED_EDGE('',*,*,#28269,.F.); +#28269 = EDGE_CURVE('',#28270,#28262,#28272,.T.); +#28270 = VERTEX_POINT('',#28271); +#28271 = CARTESIAN_POINT('',(-0.1,-30.18,0.9)); +#28272 = LINE('',#28273,#28274); +#28273 = CARTESIAN_POINT('',(-0.1,-30.18,6.055738799212)); +#28274 = VECTOR('',#28275,1.); +#28275 = DIRECTION('',(0.,-0.,1.)); +#28276 = ORIENTED_EDGE('',*,*,#28277,.T.); +#28277 = EDGE_CURVE('',#28270,#28278,#28280,.T.); +#28278 = VERTEX_POINT('',#28279); +#28279 = CARTESIAN_POINT('',(-0.3,-30.18,0.9)); +#28280 = LINE('',#28281,#28282); +#28281 = CARTESIAN_POINT('',(0.3,-30.18,0.9)); +#28282 = VECTOR('',#28283,1.); +#28283 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28284 = ORIENTED_EDGE('',*,*,#28285,.F.); +#28285 = EDGE_CURVE('',#23318,#28278,#28286,.T.); +#28286 = LINE('',#28287,#28288); +#28287 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#28288 = VECTOR('',#28289,1.); +#28289 = DIRECTION('',(0.,-0.,-1.)); +#28290 = PLANE('',#28291); +#28291 = AXIS2_PLACEMENT_3D('',#28292,#28293,#28294); +#28292 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#28293 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28294 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28295 = ADVANCED_FACE('',(#28296),#28314,.F.); +#28296 = FACE_BOUND('',#28297,.F.); +#28297 = EDGE_LOOP('',(#28298,#28299,#28307,#28313)); +#28298 = ORIENTED_EDGE('',*,*,#28285,.T.); +#28299 = ORIENTED_EDGE('',*,*,#28300,.T.); +#28300 = EDGE_CURVE('',#28278,#28301,#28303,.T.); +#28301 = VERTEX_POINT('',#28302); +#28302 = CARTESIAN_POINT('',(-0.3,-30.78,0.9)); +#28303 = LINE('',#28304,#28305); +#28304 = CARTESIAN_POINT('',(-0.3,-30.18,0.9)); +#28305 = VECTOR('',#28306,1.); +#28306 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28307 = ORIENTED_EDGE('',*,*,#28308,.F.); +#28308 = EDGE_CURVE('',#23342,#28301,#28309,.T.); +#28309 = LINE('',#28310,#28311); +#28310 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#28311 = VECTOR('',#28312,1.); +#28312 = DIRECTION('',(0.,-0.,-1.)); +#28313 = ORIENTED_EDGE('',*,*,#23349,.F.); +#28314 = PLANE('',#28315); +#28315 = AXIS2_PLACEMENT_3D('',#28316,#28317,#28318); +#28316 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#28317 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28318 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28319 = ADVANCED_FACE('',(#28320),#28363,.F.); +#28320 = FACE_BOUND('',#28321,.F.); +#28321 = EDGE_LOOP('',(#28322,#28323,#28324,#28332,#28340,#28348,#28356, + #28362)); +#28322 = ORIENTED_EDGE('',*,*,#23366,.F.); +#28323 = ORIENTED_EDGE('',*,*,#28308,.T.); +#28324 = ORIENTED_EDGE('',*,*,#28325,.T.); +#28325 = EDGE_CURVE('',#28301,#28326,#28328,.T.); +#28326 = VERTEX_POINT('',#28327); +#28327 = CARTESIAN_POINT('',(-0.1,-30.78,0.9)); +#28328 = LINE('',#28329,#28330); +#28329 = CARTESIAN_POINT('',(-0.3,-30.78,0.9)); +#28330 = VECTOR('',#28331,1.); +#28331 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28332 = ORIENTED_EDGE('',*,*,#28333,.F.); +#28333 = EDGE_CURVE('',#28334,#28326,#28336,.T.); +#28334 = VERTEX_POINT('',#28335); +#28335 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#28336 = LINE('',#28337,#28338); +#28337 = CARTESIAN_POINT('',(-0.1,-30.78,6.055738799212)); +#28338 = VECTOR('',#28339,1.); +#28339 = DIRECTION('',(-0.,0.,-1.)); +#28340 = ORIENTED_EDGE('',*,*,#28341,.T.); +#28341 = EDGE_CURVE('',#28334,#28342,#28344,.T.); +#28342 = VERTEX_POINT('',#28343); +#28343 = CARTESIAN_POINT('',(0.1,-30.78,7.4)); +#28344 = LINE('',#28345,#28346); +#28345 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#28346 = VECTOR('',#28347,1.); +#28347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28348 = ORIENTED_EDGE('',*,*,#28349,.T.); +#28349 = EDGE_CURVE('',#28342,#28350,#28352,.T.); +#28350 = VERTEX_POINT('',#28351); +#28351 = CARTESIAN_POINT('',(0.1,-30.78,0.9)); +#28352 = LINE('',#28353,#28354); +#28353 = CARTESIAN_POINT('',(0.1,-30.78,6.055738799212)); +#28354 = VECTOR('',#28355,1.); +#28355 = DIRECTION('',(-0.,0.,-1.)); +#28356 = ORIENTED_EDGE('',*,*,#28357,.T.); +#28357 = EDGE_CURVE('',#28350,#28213,#28358,.T.); +#28358 = LINE('',#28359,#28360); +#28359 = CARTESIAN_POINT('',(-0.3,-30.78,0.9)); +#28360 = VECTOR('',#28361,1.); +#28361 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28362 = ORIENTED_EDGE('',*,*,#28212,.F.); +#28363 = PLANE('',#28364); +#28364 = AXIS2_PLACEMENT_3D('',#28365,#28366,#28367); +#28365 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#28366 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28367 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28368 = ADVANCED_FACE('',(#28369),#28394,.F.); +#28369 = FACE_BOUND('',#28370,.F.); +#28370 = EDGE_LOOP('',(#28371,#28379,#28387,#28393)); +#28371 = ORIENTED_EDGE('',*,*,#28372,.T.); +#28372 = EDGE_CURVE('',#23381,#28373,#28375,.T.); +#28373 = VERTEX_POINT('',#28374); +#28374 = CARTESIAN_POINT('',(0.3,-28.24,0.9)); +#28375 = LINE('',#28376,#28377); +#28376 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#28377 = VECTOR('',#28378,1.); +#28378 = DIRECTION('',(0.,-0.,-1.)); +#28379 = ORIENTED_EDGE('',*,*,#28380,.T.); +#28380 = EDGE_CURVE('',#28373,#28381,#28383,.T.); +#28381 = VERTEX_POINT('',#28382); +#28382 = CARTESIAN_POINT('',(0.3,-27.64,0.9)); +#28383 = LINE('',#28384,#28385); +#28384 = CARTESIAN_POINT('',(0.3,-28.24,0.9)); +#28385 = VECTOR('',#28386,1.); +#28386 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28387 = ORIENTED_EDGE('',*,*,#28388,.F.); +#28388 = EDGE_CURVE('',#23390,#28381,#28389,.T.); +#28389 = LINE('',#28390,#28391); +#28390 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#28391 = VECTOR('',#28392,1.); +#28392 = DIRECTION('',(0.,-0.,-1.)); +#28393 = ORIENTED_EDGE('',*,*,#23397,.F.); +#28394 = PLANE('',#28395); +#28395 = AXIS2_PLACEMENT_3D('',#28396,#28397,#28398); +#28396 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#28397 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28398 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28399 = ADVANCED_FACE('',(#28400),#28450,.F.); +#28400 = FACE_BOUND('',#28401,.F.); +#28401 = EDGE_LOOP('',(#28402,#28403,#28404,#28412,#28420,#28428,#28436, + #28444)); +#28402 = ORIENTED_EDGE('',*,*,#23421,.F.); +#28403 = ORIENTED_EDGE('',*,*,#28388,.T.); +#28404 = ORIENTED_EDGE('',*,*,#28405,.T.); +#28405 = EDGE_CURVE('',#28381,#28406,#28408,.T.); +#28406 = VERTEX_POINT('',#28407); +#28407 = CARTESIAN_POINT('',(0.1,-27.64,0.9)); +#28408 = LINE('',#28409,#28410); +#28409 = CARTESIAN_POINT('',(0.3,-27.64,0.9)); +#28410 = VECTOR('',#28411,1.); +#28411 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28412 = ORIENTED_EDGE('',*,*,#28413,.T.); +#28413 = EDGE_CURVE('',#28406,#28414,#28416,.T.); +#28414 = VERTEX_POINT('',#28415); +#28415 = CARTESIAN_POINT('',(0.1,-27.64,7.4)); +#28416 = LINE('',#28417,#28418); +#28417 = CARTESIAN_POINT('',(0.1,-27.64,6.055738799212)); +#28418 = VECTOR('',#28419,1.); +#28419 = DIRECTION('',(0.,-0.,1.)); +#28420 = ORIENTED_EDGE('',*,*,#28421,.F.); +#28421 = EDGE_CURVE('',#28422,#28414,#28424,.T.); +#28422 = VERTEX_POINT('',#28423); +#28423 = CARTESIAN_POINT('',(-0.1,-27.64,7.4)); +#28424 = LINE('',#28425,#28426); +#28425 = CARTESIAN_POINT('',(-0.1,-27.64,7.4)); +#28426 = VECTOR('',#28427,1.); +#28427 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28428 = ORIENTED_EDGE('',*,*,#28429,.F.); +#28429 = EDGE_CURVE('',#28430,#28422,#28432,.T.); +#28430 = VERTEX_POINT('',#28431); +#28431 = CARTESIAN_POINT('',(-0.1,-27.64,0.9)); +#28432 = LINE('',#28433,#28434); +#28433 = CARTESIAN_POINT('',(-0.1,-27.64,6.055738799212)); +#28434 = VECTOR('',#28435,1.); +#28435 = DIRECTION('',(0.,-0.,1.)); +#28436 = ORIENTED_EDGE('',*,*,#28437,.T.); +#28437 = EDGE_CURVE('',#28430,#28438,#28440,.T.); +#28438 = VERTEX_POINT('',#28439); +#28439 = CARTESIAN_POINT('',(-0.3,-27.64,0.9)); +#28440 = LINE('',#28441,#28442); +#28441 = CARTESIAN_POINT('',(0.3,-27.64,0.9)); +#28442 = VECTOR('',#28443,1.); +#28443 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28444 = ORIENTED_EDGE('',*,*,#28445,.F.); +#28445 = EDGE_CURVE('',#23414,#28438,#28446,.T.); +#28446 = LINE('',#28447,#28448); +#28447 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#28448 = VECTOR('',#28449,1.); +#28449 = DIRECTION('',(0.,-0.,-1.)); +#28450 = PLANE('',#28451); +#28451 = AXIS2_PLACEMENT_3D('',#28452,#28453,#28454); +#28452 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#28453 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28454 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28455 = ADVANCED_FACE('',(#28456),#28474,.F.); +#28456 = FACE_BOUND('',#28457,.F.); +#28457 = EDGE_LOOP('',(#28458,#28459,#28467,#28473)); +#28458 = ORIENTED_EDGE('',*,*,#28445,.T.); +#28459 = ORIENTED_EDGE('',*,*,#28460,.T.); +#28460 = EDGE_CURVE('',#28438,#28461,#28463,.T.); +#28461 = VERTEX_POINT('',#28462); +#28462 = CARTESIAN_POINT('',(-0.3,-28.24,0.9)); +#28463 = LINE('',#28464,#28465); +#28464 = CARTESIAN_POINT('',(-0.3,-27.64,0.9)); +#28465 = VECTOR('',#28466,1.); +#28466 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28467 = ORIENTED_EDGE('',*,*,#28468,.F.); +#28468 = EDGE_CURVE('',#23438,#28461,#28469,.T.); +#28469 = LINE('',#28470,#28471); +#28470 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#28471 = VECTOR('',#28472,1.); +#28472 = DIRECTION('',(0.,-0.,-1.)); +#28473 = ORIENTED_EDGE('',*,*,#23445,.F.); +#28474 = PLANE('',#28475); +#28475 = AXIS2_PLACEMENT_3D('',#28476,#28477,#28478); +#28476 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#28477 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28478 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28479 = ADVANCED_FACE('',(#28480),#28523,.F.); +#28480 = FACE_BOUND('',#28481,.F.); +#28481 = EDGE_LOOP('',(#28482,#28483,#28484,#28492,#28500,#28508,#28516, + #28522)); +#28482 = ORIENTED_EDGE('',*,*,#23462,.F.); +#28483 = ORIENTED_EDGE('',*,*,#28468,.T.); +#28484 = ORIENTED_EDGE('',*,*,#28485,.T.); +#28485 = EDGE_CURVE('',#28461,#28486,#28488,.T.); +#28486 = VERTEX_POINT('',#28487); +#28487 = CARTESIAN_POINT('',(-0.1,-28.24,0.9)); +#28488 = LINE('',#28489,#28490); +#28489 = CARTESIAN_POINT('',(-0.3,-28.24,0.9)); +#28490 = VECTOR('',#28491,1.); +#28491 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28492 = ORIENTED_EDGE('',*,*,#28493,.F.); +#28493 = EDGE_CURVE('',#28494,#28486,#28496,.T.); +#28494 = VERTEX_POINT('',#28495); +#28495 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#28496 = LINE('',#28497,#28498); +#28497 = CARTESIAN_POINT('',(-0.1,-28.24,6.055738799212)); +#28498 = VECTOR('',#28499,1.); +#28499 = DIRECTION('',(-0.,0.,-1.)); +#28500 = ORIENTED_EDGE('',*,*,#28501,.T.); +#28501 = EDGE_CURVE('',#28494,#28502,#28504,.T.); +#28502 = VERTEX_POINT('',#28503); +#28503 = CARTESIAN_POINT('',(0.1,-28.24,7.4)); +#28504 = LINE('',#28505,#28506); +#28505 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#28506 = VECTOR('',#28507,1.); +#28507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28508 = ORIENTED_EDGE('',*,*,#28509,.T.); +#28509 = EDGE_CURVE('',#28502,#28510,#28512,.T.); +#28510 = VERTEX_POINT('',#28511); +#28511 = CARTESIAN_POINT('',(0.1,-28.24,0.9)); +#28512 = LINE('',#28513,#28514); +#28513 = CARTESIAN_POINT('',(0.1,-28.24,6.055738799212)); +#28514 = VECTOR('',#28515,1.); +#28515 = DIRECTION('',(-0.,0.,-1.)); +#28516 = ORIENTED_EDGE('',*,*,#28517,.T.); +#28517 = EDGE_CURVE('',#28510,#28373,#28518,.T.); +#28518 = LINE('',#28519,#28520); +#28519 = CARTESIAN_POINT('',(-0.3,-28.24,0.9)); +#28520 = VECTOR('',#28521,1.); +#28521 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28522 = ORIENTED_EDGE('',*,*,#28372,.F.); +#28523 = PLANE('',#28524); +#28524 = AXIS2_PLACEMENT_3D('',#28525,#28526,#28527); +#28525 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#28526 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28527 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28528 = ADVANCED_FACE('',(#28529),#28554,.F.); +#28529 = FACE_BOUND('',#28530,.F.); +#28530 = EDGE_LOOP('',(#28531,#28539,#28547,#28553)); +#28531 = ORIENTED_EDGE('',*,*,#28532,.T.); +#28532 = EDGE_CURVE('',#23477,#28533,#28535,.T.); +#28533 = VERTEX_POINT('',#28534); +#28534 = CARTESIAN_POINT('',(0.3,-25.7,0.9)); +#28535 = LINE('',#28536,#28537); +#28536 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#28537 = VECTOR('',#28538,1.); +#28538 = DIRECTION('',(0.,-0.,-1.)); +#28539 = ORIENTED_EDGE('',*,*,#28540,.T.); +#28540 = EDGE_CURVE('',#28533,#28541,#28543,.T.); +#28541 = VERTEX_POINT('',#28542); +#28542 = CARTESIAN_POINT('',(0.3,-25.1,0.9)); +#28543 = LINE('',#28544,#28545); +#28544 = CARTESIAN_POINT('',(0.3,-25.7,0.9)); +#28545 = VECTOR('',#28546,1.); +#28546 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28547 = ORIENTED_EDGE('',*,*,#28548,.F.); +#28548 = EDGE_CURVE('',#23486,#28541,#28549,.T.); +#28549 = LINE('',#28550,#28551); +#28550 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#28551 = VECTOR('',#28552,1.); +#28552 = DIRECTION('',(0.,-0.,-1.)); +#28553 = ORIENTED_EDGE('',*,*,#23493,.F.); +#28554 = PLANE('',#28555); +#28555 = AXIS2_PLACEMENT_3D('',#28556,#28557,#28558); +#28556 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#28557 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28558 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28559 = ADVANCED_FACE('',(#28560),#28610,.F.); +#28560 = FACE_BOUND('',#28561,.F.); +#28561 = EDGE_LOOP('',(#28562,#28563,#28564,#28572,#28580,#28588,#28596, + #28604)); +#28562 = ORIENTED_EDGE('',*,*,#23517,.F.); +#28563 = ORIENTED_EDGE('',*,*,#28548,.T.); +#28564 = ORIENTED_EDGE('',*,*,#28565,.T.); +#28565 = EDGE_CURVE('',#28541,#28566,#28568,.T.); +#28566 = VERTEX_POINT('',#28567); +#28567 = CARTESIAN_POINT('',(0.1,-25.1,0.9)); +#28568 = LINE('',#28569,#28570); +#28569 = CARTESIAN_POINT('',(0.3,-25.1,0.9)); +#28570 = VECTOR('',#28571,1.); +#28571 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28572 = ORIENTED_EDGE('',*,*,#28573,.T.); +#28573 = EDGE_CURVE('',#28566,#28574,#28576,.T.); +#28574 = VERTEX_POINT('',#28575); +#28575 = CARTESIAN_POINT('',(0.1,-25.1,7.4)); +#28576 = LINE('',#28577,#28578); +#28577 = CARTESIAN_POINT('',(0.1,-25.1,6.055738799212)); +#28578 = VECTOR('',#28579,1.); +#28579 = DIRECTION('',(0.,-0.,1.)); +#28580 = ORIENTED_EDGE('',*,*,#28581,.F.); +#28581 = EDGE_CURVE('',#28582,#28574,#28584,.T.); +#28582 = VERTEX_POINT('',#28583); +#28583 = CARTESIAN_POINT('',(-0.1,-25.1,7.4)); +#28584 = LINE('',#28585,#28586); +#28585 = CARTESIAN_POINT('',(-0.1,-25.1,7.4)); +#28586 = VECTOR('',#28587,1.); +#28587 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28588 = ORIENTED_EDGE('',*,*,#28589,.F.); +#28589 = EDGE_CURVE('',#28590,#28582,#28592,.T.); +#28590 = VERTEX_POINT('',#28591); +#28591 = CARTESIAN_POINT('',(-0.1,-25.1,0.9)); +#28592 = LINE('',#28593,#28594); +#28593 = CARTESIAN_POINT('',(-0.1,-25.1,6.055738799212)); +#28594 = VECTOR('',#28595,1.); +#28595 = DIRECTION('',(0.,-0.,1.)); +#28596 = ORIENTED_EDGE('',*,*,#28597,.T.); +#28597 = EDGE_CURVE('',#28590,#28598,#28600,.T.); +#28598 = VERTEX_POINT('',#28599); +#28599 = CARTESIAN_POINT('',(-0.3,-25.1,0.9)); +#28600 = LINE('',#28601,#28602); +#28601 = CARTESIAN_POINT('',(0.3,-25.1,0.9)); +#28602 = VECTOR('',#28603,1.); +#28603 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28604 = ORIENTED_EDGE('',*,*,#28605,.F.); +#28605 = EDGE_CURVE('',#23510,#28598,#28606,.T.); +#28606 = LINE('',#28607,#28608); +#28607 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#28608 = VECTOR('',#28609,1.); +#28609 = DIRECTION('',(0.,-0.,-1.)); +#28610 = PLANE('',#28611); +#28611 = AXIS2_PLACEMENT_3D('',#28612,#28613,#28614); +#28612 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#28613 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28614 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28615 = ADVANCED_FACE('',(#28616),#28634,.F.); +#28616 = FACE_BOUND('',#28617,.F.); +#28617 = EDGE_LOOP('',(#28618,#28619,#28627,#28633)); +#28618 = ORIENTED_EDGE('',*,*,#28605,.T.); +#28619 = ORIENTED_EDGE('',*,*,#28620,.T.); +#28620 = EDGE_CURVE('',#28598,#28621,#28623,.T.); +#28621 = VERTEX_POINT('',#28622); +#28622 = CARTESIAN_POINT('',(-0.3,-25.7,0.9)); +#28623 = LINE('',#28624,#28625); +#28624 = CARTESIAN_POINT('',(-0.3,-25.1,0.9)); +#28625 = VECTOR('',#28626,1.); +#28626 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28627 = ORIENTED_EDGE('',*,*,#28628,.F.); +#28628 = EDGE_CURVE('',#23534,#28621,#28629,.T.); +#28629 = LINE('',#28630,#28631); +#28630 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#28631 = VECTOR('',#28632,1.); +#28632 = DIRECTION('',(0.,-0.,-1.)); +#28633 = ORIENTED_EDGE('',*,*,#23541,.F.); +#28634 = PLANE('',#28635); +#28635 = AXIS2_PLACEMENT_3D('',#28636,#28637,#28638); +#28636 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#28637 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28638 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28639 = ADVANCED_FACE('',(#28640),#28683,.F.); +#28640 = FACE_BOUND('',#28641,.F.); +#28641 = EDGE_LOOP('',(#28642,#28643,#28644,#28652,#28660,#28668,#28676, + #28682)); +#28642 = ORIENTED_EDGE('',*,*,#23558,.F.); +#28643 = ORIENTED_EDGE('',*,*,#28628,.T.); +#28644 = ORIENTED_EDGE('',*,*,#28645,.T.); +#28645 = EDGE_CURVE('',#28621,#28646,#28648,.T.); +#28646 = VERTEX_POINT('',#28647); +#28647 = CARTESIAN_POINT('',(-0.1,-25.7,0.9)); +#28648 = LINE('',#28649,#28650); +#28649 = CARTESIAN_POINT('',(-0.3,-25.7,0.9)); +#28650 = VECTOR('',#28651,1.); +#28651 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28652 = ORIENTED_EDGE('',*,*,#28653,.F.); +#28653 = EDGE_CURVE('',#28654,#28646,#28656,.T.); +#28654 = VERTEX_POINT('',#28655); +#28655 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#28656 = LINE('',#28657,#28658); +#28657 = CARTESIAN_POINT('',(-0.1,-25.7,6.055738799212)); +#28658 = VECTOR('',#28659,1.); +#28659 = DIRECTION('',(-0.,0.,-1.)); +#28660 = ORIENTED_EDGE('',*,*,#28661,.T.); +#28661 = EDGE_CURVE('',#28654,#28662,#28664,.T.); +#28662 = VERTEX_POINT('',#28663); +#28663 = CARTESIAN_POINT('',(0.1,-25.7,7.4)); +#28664 = LINE('',#28665,#28666); +#28665 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#28666 = VECTOR('',#28667,1.); +#28667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28668 = ORIENTED_EDGE('',*,*,#28669,.T.); +#28669 = EDGE_CURVE('',#28662,#28670,#28672,.T.); +#28670 = VERTEX_POINT('',#28671); +#28671 = CARTESIAN_POINT('',(0.1,-25.7,0.9)); +#28672 = LINE('',#28673,#28674); +#28673 = CARTESIAN_POINT('',(0.1,-25.7,6.055738799212)); +#28674 = VECTOR('',#28675,1.); +#28675 = DIRECTION('',(-0.,0.,-1.)); +#28676 = ORIENTED_EDGE('',*,*,#28677,.T.); +#28677 = EDGE_CURVE('',#28670,#28533,#28678,.T.); +#28678 = LINE('',#28679,#28680); +#28679 = CARTESIAN_POINT('',(-0.3,-25.7,0.9)); +#28680 = VECTOR('',#28681,1.); +#28681 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28682 = ORIENTED_EDGE('',*,*,#28532,.F.); +#28683 = PLANE('',#28684); +#28684 = AXIS2_PLACEMENT_3D('',#28685,#28686,#28687); +#28685 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#28686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28687 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28688 = ADVANCED_FACE('',(#28689),#28714,.F.); +#28689 = FACE_BOUND('',#28690,.F.); +#28690 = EDGE_LOOP('',(#28691,#28699,#28707,#28713)); +#28691 = ORIENTED_EDGE('',*,*,#28692,.T.); +#28692 = EDGE_CURVE('',#23573,#28693,#28695,.T.); +#28693 = VERTEX_POINT('',#28694); +#28694 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#28695 = LINE('',#28696,#28697); +#28696 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#28697 = VECTOR('',#28698,1.); +#28698 = DIRECTION('',(0.,-0.,-1.)); +#28699 = ORIENTED_EDGE('',*,*,#28700,.T.); +#28700 = EDGE_CURVE('',#28693,#28701,#28703,.T.); +#28701 = VERTEX_POINT('',#28702); +#28702 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#28703 = LINE('',#28704,#28705); +#28704 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#28705 = VECTOR('',#28706,1.); +#28706 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28707 = ORIENTED_EDGE('',*,*,#28708,.F.); +#28708 = EDGE_CURVE('',#23582,#28701,#28709,.T.); +#28709 = LINE('',#28710,#28711); +#28710 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#28711 = VECTOR('',#28712,1.); +#28712 = DIRECTION('',(0.,-0.,-1.)); +#28713 = ORIENTED_EDGE('',*,*,#23589,.F.); +#28714 = PLANE('',#28715); +#28715 = AXIS2_PLACEMENT_3D('',#28716,#28717,#28718); +#28716 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#28717 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28718 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28719 = ADVANCED_FACE('',(#28720),#28770,.F.); +#28720 = FACE_BOUND('',#28721,.F.); +#28721 = EDGE_LOOP('',(#28722,#28723,#28724,#28732,#28740,#28748,#28756, + #28764)); +#28722 = ORIENTED_EDGE('',*,*,#23613,.F.); +#28723 = ORIENTED_EDGE('',*,*,#28708,.T.); +#28724 = ORIENTED_EDGE('',*,*,#28725,.T.); +#28725 = EDGE_CURVE('',#28701,#28726,#28728,.T.); +#28726 = VERTEX_POINT('',#28727); +#28727 = CARTESIAN_POINT('',(0.1,-22.56,0.9)); +#28728 = LINE('',#28729,#28730); +#28729 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#28730 = VECTOR('',#28731,1.); +#28731 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28732 = ORIENTED_EDGE('',*,*,#28733,.T.); +#28733 = EDGE_CURVE('',#28726,#28734,#28736,.T.); +#28734 = VERTEX_POINT('',#28735); +#28735 = CARTESIAN_POINT('',(0.1,-22.56,7.4)); +#28736 = LINE('',#28737,#28738); +#28737 = CARTESIAN_POINT('',(0.1,-22.56,6.055738799212)); +#28738 = VECTOR('',#28739,1.); +#28739 = DIRECTION('',(0.,-0.,1.)); +#28740 = ORIENTED_EDGE('',*,*,#28741,.F.); +#28741 = EDGE_CURVE('',#28742,#28734,#28744,.T.); +#28742 = VERTEX_POINT('',#28743); +#28743 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#28744 = LINE('',#28745,#28746); +#28745 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#28746 = VECTOR('',#28747,1.); +#28747 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28748 = ORIENTED_EDGE('',*,*,#28749,.F.); +#28749 = EDGE_CURVE('',#28750,#28742,#28752,.T.); +#28750 = VERTEX_POINT('',#28751); +#28751 = CARTESIAN_POINT('',(-0.1,-22.56,0.9)); +#28752 = LINE('',#28753,#28754); +#28753 = CARTESIAN_POINT('',(-0.1,-22.56,6.055738799212)); +#28754 = VECTOR('',#28755,1.); +#28755 = DIRECTION('',(0.,-0.,1.)); +#28756 = ORIENTED_EDGE('',*,*,#28757,.T.); +#28757 = EDGE_CURVE('',#28750,#28758,#28760,.T.); +#28758 = VERTEX_POINT('',#28759); +#28759 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#28760 = LINE('',#28761,#28762); +#28761 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#28762 = VECTOR('',#28763,1.); +#28763 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28764 = ORIENTED_EDGE('',*,*,#28765,.F.); +#28765 = EDGE_CURVE('',#23606,#28758,#28766,.T.); +#28766 = LINE('',#28767,#28768); +#28767 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#28768 = VECTOR('',#28769,1.); +#28769 = DIRECTION('',(0.,-0.,-1.)); +#28770 = PLANE('',#28771); +#28771 = AXIS2_PLACEMENT_3D('',#28772,#28773,#28774); +#28772 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#28773 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28774 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28775 = ADVANCED_FACE('',(#28776),#28794,.F.); +#28776 = FACE_BOUND('',#28777,.F.); +#28777 = EDGE_LOOP('',(#28778,#28779,#28787,#28793)); +#28778 = ORIENTED_EDGE('',*,*,#28765,.T.); +#28779 = ORIENTED_EDGE('',*,*,#28780,.T.); +#28780 = EDGE_CURVE('',#28758,#28781,#28783,.T.); +#28781 = VERTEX_POINT('',#28782); +#28782 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#28783 = LINE('',#28784,#28785); +#28784 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#28785 = VECTOR('',#28786,1.); +#28786 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28787 = ORIENTED_EDGE('',*,*,#28788,.F.); +#28788 = EDGE_CURVE('',#23630,#28781,#28789,.T.); +#28789 = LINE('',#28790,#28791); +#28790 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#28791 = VECTOR('',#28792,1.); +#28792 = DIRECTION('',(0.,-0.,-1.)); +#28793 = ORIENTED_EDGE('',*,*,#23637,.F.); +#28794 = PLANE('',#28795); +#28795 = AXIS2_PLACEMENT_3D('',#28796,#28797,#28798); +#28796 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#28797 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28798 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28799 = ADVANCED_FACE('',(#28800),#28843,.F.); +#28800 = FACE_BOUND('',#28801,.F.); +#28801 = EDGE_LOOP('',(#28802,#28803,#28804,#28812,#28820,#28828,#28836, + #28842)); +#28802 = ORIENTED_EDGE('',*,*,#23654,.F.); +#28803 = ORIENTED_EDGE('',*,*,#28788,.T.); +#28804 = ORIENTED_EDGE('',*,*,#28805,.T.); +#28805 = EDGE_CURVE('',#28781,#28806,#28808,.T.); +#28806 = VERTEX_POINT('',#28807); +#28807 = CARTESIAN_POINT('',(-0.1,-23.16,0.9)); +#28808 = LINE('',#28809,#28810); +#28809 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#28810 = VECTOR('',#28811,1.); +#28811 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28812 = ORIENTED_EDGE('',*,*,#28813,.F.); +#28813 = EDGE_CURVE('',#28814,#28806,#28816,.T.); +#28814 = VERTEX_POINT('',#28815); +#28815 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#28816 = LINE('',#28817,#28818); +#28817 = CARTESIAN_POINT('',(-0.1,-23.16,6.055738799212)); +#28818 = VECTOR('',#28819,1.); +#28819 = DIRECTION('',(-0.,0.,-1.)); +#28820 = ORIENTED_EDGE('',*,*,#28821,.T.); +#28821 = EDGE_CURVE('',#28814,#28822,#28824,.T.); +#28822 = VERTEX_POINT('',#28823); +#28823 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#28824 = LINE('',#28825,#28826); +#28825 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#28826 = VECTOR('',#28827,1.); +#28827 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28828 = ORIENTED_EDGE('',*,*,#28829,.T.); +#28829 = EDGE_CURVE('',#28822,#28830,#28832,.T.); +#28830 = VERTEX_POINT('',#28831); +#28831 = CARTESIAN_POINT('',(0.1,-23.16,0.9)); +#28832 = LINE('',#28833,#28834); +#28833 = CARTESIAN_POINT('',(0.1,-23.16,6.055738799212)); +#28834 = VECTOR('',#28835,1.); +#28835 = DIRECTION('',(-0.,0.,-1.)); +#28836 = ORIENTED_EDGE('',*,*,#28837,.T.); +#28837 = EDGE_CURVE('',#28830,#28693,#28838,.T.); +#28838 = LINE('',#28839,#28840); +#28839 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#28840 = VECTOR('',#28841,1.); +#28841 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28842 = ORIENTED_EDGE('',*,*,#28692,.F.); +#28843 = PLANE('',#28844); +#28844 = AXIS2_PLACEMENT_3D('',#28845,#28846,#28847); +#28845 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#28846 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28847 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28848 = ADVANCED_FACE('',(#28849),#28874,.F.); +#28849 = FACE_BOUND('',#28850,.F.); +#28850 = EDGE_LOOP('',(#28851,#28859,#28867,#28873)); +#28851 = ORIENTED_EDGE('',*,*,#28852,.T.); +#28852 = EDGE_CURVE('',#23669,#28853,#28855,.T.); +#28853 = VERTEX_POINT('',#28854); +#28854 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#28855 = LINE('',#28856,#28857); +#28856 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#28857 = VECTOR('',#28858,1.); +#28858 = DIRECTION('',(0.,-0.,-1.)); +#28859 = ORIENTED_EDGE('',*,*,#28860,.T.); +#28860 = EDGE_CURVE('',#28853,#28861,#28863,.T.); +#28861 = VERTEX_POINT('',#28862); +#28862 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#28863 = LINE('',#28864,#28865); +#28864 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#28865 = VECTOR('',#28866,1.); +#28866 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28867 = ORIENTED_EDGE('',*,*,#28868,.F.); +#28868 = EDGE_CURVE('',#23678,#28861,#28869,.T.); +#28869 = LINE('',#28870,#28871); +#28870 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#28871 = VECTOR('',#28872,1.); +#28872 = DIRECTION('',(0.,-0.,-1.)); +#28873 = ORIENTED_EDGE('',*,*,#23685,.F.); +#28874 = PLANE('',#28875); +#28875 = AXIS2_PLACEMENT_3D('',#28876,#28877,#28878); +#28876 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#28877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28878 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28879 = ADVANCED_FACE('',(#28880),#28930,.F.); +#28880 = FACE_BOUND('',#28881,.F.); +#28881 = EDGE_LOOP('',(#28882,#28883,#28884,#28892,#28900,#28908,#28916, + #28924)); +#28882 = ORIENTED_EDGE('',*,*,#23709,.F.); +#28883 = ORIENTED_EDGE('',*,*,#28868,.T.); +#28884 = ORIENTED_EDGE('',*,*,#28885,.T.); +#28885 = EDGE_CURVE('',#28861,#28886,#28888,.T.); +#28886 = VERTEX_POINT('',#28887); +#28887 = CARTESIAN_POINT('',(0.1,-20.02,0.9)); +#28888 = LINE('',#28889,#28890); +#28889 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#28890 = VECTOR('',#28891,1.); +#28891 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28892 = ORIENTED_EDGE('',*,*,#28893,.T.); +#28893 = EDGE_CURVE('',#28886,#28894,#28896,.T.); +#28894 = VERTEX_POINT('',#28895); +#28895 = CARTESIAN_POINT('',(0.1,-20.02,7.4)); +#28896 = LINE('',#28897,#28898); +#28897 = CARTESIAN_POINT('',(0.1,-20.02,6.055738799212)); +#28898 = VECTOR('',#28899,1.); +#28899 = DIRECTION('',(0.,-0.,1.)); +#28900 = ORIENTED_EDGE('',*,*,#28901,.F.); +#28901 = EDGE_CURVE('',#28902,#28894,#28904,.T.); +#28902 = VERTEX_POINT('',#28903); +#28903 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#28904 = LINE('',#28905,#28906); +#28905 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#28906 = VECTOR('',#28907,1.); +#28907 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28908 = ORIENTED_EDGE('',*,*,#28909,.F.); +#28909 = EDGE_CURVE('',#28910,#28902,#28912,.T.); +#28910 = VERTEX_POINT('',#28911); +#28911 = CARTESIAN_POINT('',(-0.1,-20.02,0.9)); +#28912 = LINE('',#28913,#28914); +#28913 = CARTESIAN_POINT('',(-0.1,-20.02,6.055738799212)); +#28914 = VECTOR('',#28915,1.); +#28915 = DIRECTION('',(0.,-0.,1.)); +#28916 = ORIENTED_EDGE('',*,*,#28917,.T.); +#28917 = EDGE_CURVE('',#28910,#28918,#28920,.T.); +#28918 = VERTEX_POINT('',#28919); +#28919 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#28920 = LINE('',#28921,#28922); +#28921 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#28922 = VECTOR('',#28923,1.); +#28923 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28924 = ORIENTED_EDGE('',*,*,#28925,.F.); +#28925 = EDGE_CURVE('',#23702,#28918,#28926,.T.); +#28926 = LINE('',#28927,#28928); +#28927 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#28928 = VECTOR('',#28929,1.); +#28929 = DIRECTION('',(0.,-0.,-1.)); +#28930 = PLANE('',#28931); +#28931 = AXIS2_PLACEMENT_3D('',#28932,#28933,#28934); +#28932 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#28933 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28934 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28935 = ADVANCED_FACE('',(#28936),#28954,.F.); +#28936 = FACE_BOUND('',#28937,.F.); +#28937 = EDGE_LOOP('',(#28938,#28939,#28947,#28953)); +#28938 = ORIENTED_EDGE('',*,*,#28925,.T.); +#28939 = ORIENTED_EDGE('',*,*,#28940,.T.); +#28940 = EDGE_CURVE('',#28918,#28941,#28943,.T.); +#28941 = VERTEX_POINT('',#28942); +#28942 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#28943 = LINE('',#28944,#28945); +#28944 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#28945 = VECTOR('',#28946,1.); +#28946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28947 = ORIENTED_EDGE('',*,*,#28948,.F.); +#28948 = EDGE_CURVE('',#23726,#28941,#28949,.T.); +#28949 = LINE('',#28950,#28951); +#28950 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#28951 = VECTOR('',#28952,1.); +#28952 = DIRECTION('',(0.,-0.,-1.)); +#28953 = ORIENTED_EDGE('',*,*,#23733,.F.); +#28954 = PLANE('',#28955); +#28955 = AXIS2_PLACEMENT_3D('',#28956,#28957,#28958); +#28956 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#28957 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28958 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28959 = ADVANCED_FACE('',(#28960),#29003,.F.); +#28960 = FACE_BOUND('',#28961,.F.); +#28961 = EDGE_LOOP('',(#28962,#28963,#28964,#28972,#28980,#28988,#28996, + #29002)); +#28962 = ORIENTED_EDGE('',*,*,#23750,.F.); +#28963 = ORIENTED_EDGE('',*,*,#28948,.T.); +#28964 = ORIENTED_EDGE('',*,*,#28965,.T.); +#28965 = EDGE_CURVE('',#28941,#28966,#28968,.T.); +#28966 = VERTEX_POINT('',#28967); +#28967 = CARTESIAN_POINT('',(-0.1,-20.62,0.9)); +#28968 = LINE('',#28969,#28970); +#28969 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#28970 = VECTOR('',#28971,1.); +#28971 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28972 = ORIENTED_EDGE('',*,*,#28973,.F.); +#28973 = EDGE_CURVE('',#28974,#28966,#28976,.T.); +#28974 = VERTEX_POINT('',#28975); +#28975 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#28976 = LINE('',#28977,#28978); +#28977 = CARTESIAN_POINT('',(-0.1,-20.62,6.055738799212)); +#28978 = VECTOR('',#28979,1.); +#28979 = DIRECTION('',(-0.,0.,-1.)); +#28980 = ORIENTED_EDGE('',*,*,#28981,.T.); +#28981 = EDGE_CURVE('',#28974,#28982,#28984,.T.); +#28982 = VERTEX_POINT('',#28983); +#28983 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#28984 = LINE('',#28985,#28986); +#28985 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#28986 = VECTOR('',#28987,1.); +#28987 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28988 = ORIENTED_EDGE('',*,*,#28989,.T.); +#28989 = EDGE_CURVE('',#28982,#28990,#28992,.T.); +#28990 = VERTEX_POINT('',#28991); +#28991 = CARTESIAN_POINT('',(0.1,-20.62,0.9)); +#28992 = LINE('',#28993,#28994); +#28993 = CARTESIAN_POINT('',(0.1,-20.62,6.055738799212)); +#28994 = VECTOR('',#28995,1.); +#28995 = DIRECTION('',(-0.,0.,-1.)); +#28996 = ORIENTED_EDGE('',*,*,#28997,.T.); +#28997 = EDGE_CURVE('',#28990,#28853,#28998,.T.); +#28998 = LINE('',#28999,#29000); +#28999 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#29000 = VECTOR('',#29001,1.); +#29001 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29002 = ORIENTED_EDGE('',*,*,#28852,.F.); +#29003 = PLANE('',#29004); +#29004 = AXIS2_PLACEMENT_3D('',#29005,#29006,#29007); +#29005 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#29006 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29007 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29008 = ADVANCED_FACE('',(#29009),#29034,.F.); +#29009 = FACE_BOUND('',#29010,.F.); +#29010 = EDGE_LOOP('',(#29011,#29019,#29027,#29033)); +#29011 = ORIENTED_EDGE('',*,*,#29012,.T.); +#29012 = EDGE_CURVE('',#23765,#29013,#29015,.T.); +#29013 = VERTEX_POINT('',#29014); +#29014 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#29015 = LINE('',#29016,#29017); +#29016 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#29017 = VECTOR('',#29018,1.); +#29018 = DIRECTION('',(0.,-0.,-1.)); +#29019 = ORIENTED_EDGE('',*,*,#29020,.T.); +#29020 = EDGE_CURVE('',#29013,#29021,#29023,.T.); +#29021 = VERTEX_POINT('',#29022); +#29022 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#29023 = LINE('',#29024,#29025); +#29024 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#29025 = VECTOR('',#29026,1.); +#29026 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29027 = ORIENTED_EDGE('',*,*,#29028,.F.); +#29028 = EDGE_CURVE('',#23774,#29021,#29029,.T.); +#29029 = LINE('',#29030,#29031); +#29030 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#29031 = VECTOR('',#29032,1.); +#29032 = DIRECTION('',(0.,-0.,-1.)); +#29033 = ORIENTED_EDGE('',*,*,#23781,.F.); +#29034 = PLANE('',#29035); +#29035 = AXIS2_PLACEMENT_3D('',#29036,#29037,#29038); +#29036 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#29037 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29038 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29039 = ADVANCED_FACE('',(#29040),#29090,.F.); +#29040 = FACE_BOUND('',#29041,.F.); +#29041 = EDGE_LOOP('',(#29042,#29043,#29044,#29052,#29060,#29068,#29076, + #29084)); +#29042 = ORIENTED_EDGE('',*,*,#23805,.F.); +#29043 = ORIENTED_EDGE('',*,*,#29028,.T.); +#29044 = ORIENTED_EDGE('',*,*,#29045,.T.); +#29045 = EDGE_CURVE('',#29021,#29046,#29048,.T.); +#29046 = VERTEX_POINT('',#29047); +#29047 = CARTESIAN_POINT('',(0.1,-17.48,0.9)); +#29048 = LINE('',#29049,#29050); +#29049 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#29050 = VECTOR('',#29051,1.); +#29051 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29052 = ORIENTED_EDGE('',*,*,#29053,.T.); +#29053 = EDGE_CURVE('',#29046,#29054,#29056,.T.); +#29054 = VERTEX_POINT('',#29055); +#29055 = CARTESIAN_POINT('',(0.1,-17.48,7.4)); +#29056 = LINE('',#29057,#29058); +#29057 = CARTESIAN_POINT('',(0.1,-17.48,6.055738799212)); +#29058 = VECTOR('',#29059,1.); +#29059 = DIRECTION('',(0.,-0.,1.)); +#29060 = ORIENTED_EDGE('',*,*,#29061,.F.); +#29061 = EDGE_CURVE('',#29062,#29054,#29064,.T.); +#29062 = VERTEX_POINT('',#29063); +#29063 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#29064 = LINE('',#29065,#29066); +#29065 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#29066 = VECTOR('',#29067,1.); +#29067 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29068 = ORIENTED_EDGE('',*,*,#29069,.F.); +#29069 = EDGE_CURVE('',#29070,#29062,#29072,.T.); +#29070 = VERTEX_POINT('',#29071); +#29071 = CARTESIAN_POINT('',(-0.1,-17.48,0.9)); +#29072 = LINE('',#29073,#29074); +#29073 = CARTESIAN_POINT('',(-0.1,-17.48,6.055738799212)); +#29074 = VECTOR('',#29075,1.); +#29075 = DIRECTION('',(0.,-0.,1.)); +#29076 = ORIENTED_EDGE('',*,*,#29077,.T.); +#29077 = EDGE_CURVE('',#29070,#29078,#29080,.T.); +#29078 = VERTEX_POINT('',#29079); +#29079 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#29080 = LINE('',#29081,#29082); +#29081 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#29082 = VECTOR('',#29083,1.); +#29083 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29084 = ORIENTED_EDGE('',*,*,#29085,.F.); +#29085 = EDGE_CURVE('',#23798,#29078,#29086,.T.); +#29086 = LINE('',#29087,#29088); +#29087 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#29088 = VECTOR('',#29089,1.); +#29089 = DIRECTION('',(0.,-0.,-1.)); +#29090 = PLANE('',#29091); +#29091 = AXIS2_PLACEMENT_3D('',#29092,#29093,#29094); +#29092 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#29093 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29094 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29095 = ADVANCED_FACE('',(#29096),#29114,.F.); +#29096 = FACE_BOUND('',#29097,.F.); +#29097 = EDGE_LOOP('',(#29098,#29099,#29107,#29113)); +#29098 = ORIENTED_EDGE('',*,*,#29085,.T.); +#29099 = ORIENTED_EDGE('',*,*,#29100,.T.); +#29100 = EDGE_CURVE('',#29078,#29101,#29103,.T.); +#29101 = VERTEX_POINT('',#29102); +#29102 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#29103 = LINE('',#29104,#29105); +#29104 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#29105 = VECTOR('',#29106,1.); +#29106 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29107 = ORIENTED_EDGE('',*,*,#29108,.F.); +#29108 = EDGE_CURVE('',#23822,#29101,#29109,.T.); +#29109 = LINE('',#29110,#29111); +#29110 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#29111 = VECTOR('',#29112,1.); +#29112 = DIRECTION('',(0.,-0.,-1.)); +#29113 = ORIENTED_EDGE('',*,*,#23829,.F.); +#29114 = PLANE('',#29115); +#29115 = AXIS2_PLACEMENT_3D('',#29116,#29117,#29118); +#29116 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#29117 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29118 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29119 = ADVANCED_FACE('',(#29120),#29163,.F.); +#29120 = FACE_BOUND('',#29121,.F.); +#29121 = EDGE_LOOP('',(#29122,#29123,#29124,#29132,#29140,#29148,#29156, + #29162)); +#29122 = ORIENTED_EDGE('',*,*,#23846,.F.); +#29123 = ORIENTED_EDGE('',*,*,#29108,.T.); +#29124 = ORIENTED_EDGE('',*,*,#29125,.T.); +#29125 = EDGE_CURVE('',#29101,#29126,#29128,.T.); +#29126 = VERTEX_POINT('',#29127); +#29127 = CARTESIAN_POINT('',(-0.1,-18.08,0.9)); +#29128 = LINE('',#29129,#29130); +#29129 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#29130 = VECTOR('',#29131,1.); +#29131 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29132 = ORIENTED_EDGE('',*,*,#29133,.F.); +#29133 = EDGE_CURVE('',#29134,#29126,#29136,.T.); +#29134 = VERTEX_POINT('',#29135); +#29135 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#29136 = LINE('',#29137,#29138); +#29137 = CARTESIAN_POINT('',(-0.1,-18.08,6.055738799212)); +#29138 = VECTOR('',#29139,1.); +#29139 = DIRECTION('',(-0.,0.,-1.)); +#29140 = ORIENTED_EDGE('',*,*,#29141,.T.); +#29141 = EDGE_CURVE('',#29134,#29142,#29144,.T.); +#29142 = VERTEX_POINT('',#29143); +#29143 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#29144 = LINE('',#29145,#29146); +#29145 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#29146 = VECTOR('',#29147,1.); +#29147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29148 = ORIENTED_EDGE('',*,*,#29149,.T.); +#29149 = EDGE_CURVE('',#29142,#29150,#29152,.T.); +#29150 = VERTEX_POINT('',#29151); +#29151 = CARTESIAN_POINT('',(0.1,-18.08,0.9)); +#29152 = LINE('',#29153,#29154); +#29153 = CARTESIAN_POINT('',(0.1,-18.08,6.055738799212)); +#29154 = VECTOR('',#29155,1.); +#29155 = DIRECTION('',(-0.,0.,-1.)); +#29156 = ORIENTED_EDGE('',*,*,#29157,.T.); +#29157 = EDGE_CURVE('',#29150,#29013,#29158,.T.); +#29158 = LINE('',#29159,#29160); +#29159 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#29160 = VECTOR('',#29161,1.); +#29161 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29162 = ORIENTED_EDGE('',*,*,#29012,.F.); +#29163 = PLANE('',#29164); +#29164 = AXIS2_PLACEMENT_3D('',#29165,#29166,#29167); +#29165 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#29166 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29167 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29168 = ADVANCED_FACE('',(#29169),#29194,.F.); +#29169 = FACE_BOUND('',#29170,.F.); +#29170 = EDGE_LOOP('',(#29171,#29179,#29187,#29193)); +#29171 = ORIENTED_EDGE('',*,*,#29172,.T.); +#29172 = EDGE_CURVE('',#23861,#29173,#29175,.T.); +#29173 = VERTEX_POINT('',#29174); +#29174 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#29175 = LINE('',#29176,#29177); +#29176 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#29177 = VECTOR('',#29178,1.); +#29178 = DIRECTION('',(0.,-0.,-1.)); +#29179 = ORIENTED_EDGE('',*,*,#29180,.T.); +#29180 = EDGE_CURVE('',#29173,#29181,#29183,.T.); +#29181 = VERTEX_POINT('',#29182); +#29182 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#29183 = LINE('',#29184,#29185); +#29184 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#29185 = VECTOR('',#29186,1.); +#29186 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29187 = ORIENTED_EDGE('',*,*,#29188,.F.); +#29188 = EDGE_CURVE('',#23870,#29181,#29189,.T.); +#29189 = LINE('',#29190,#29191); +#29190 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#29191 = VECTOR('',#29192,1.); +#29192 = DIRECTION('',(0.,-0.,-1.)); +#29193 = ORIENTED_EDGE('',*,*,#23877,.F.); +#29194 = PLANE('',#29195); +#29195 = AXIS2_PLACEMENT_3D('',#29196,#29197,#29198); +#29196 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#29197 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29198 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29199 = ADVANCED_FACE('',(#29200),#29250,.F.); +#29200 = FACE_BOUND('',#29201,.F.); +#29201 = EDGE_LOOP('',(#29202,#29203,#29204,#29212,#29220,#29228,#29236, + #29244)); +#29202 = ORIENTED_EDGE('',*,*,#23901,.F.); +#29203 = ORIENTED_EDGE('',*,*,#29188,.T.); +#29204 = ORIENTED_EDGE('',*,*,#29205,.T.); +#29205 = EDGE_CURVE('',#29181,#29206,#29208,.T.); +#29206 = VERTEX_POINT('',#29207); +#29207 = CARTESIAN_POINT('',(0.1,-14.94,0.9)); +#29208 = LINE('',#29209,#29210); +#29209 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#29210 = VECTOR('',#29211,1.); +#29211 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29212 = ORIENTED_EDGE('',*,*,#29213,.T.); +#29213 = EDGE_CURVE('',#29206,#29214,#29216,.T.); +#29214 = VERTEX_POINT('',#29215); +#29215 = CARTESIAN_POINT('',(0.1,-14.94,7.4)); +#29216 = LINE('',#29217,#29218); +#29217 = CARTESIAN_POINT('',(0.1,-14.94,6.055738799212)); +#29218 = VECTOR('',#29219,1.); +#29219 = DIRECTION('',(0.,-0.,1.)); +#29220 = ORIENTED_EDGE('',*,*,#29221,.F.); +#29221 = EDGE_CURVE('',#29222,#29214,#29224,.T.); +#29222 = VERTEX_POINT('',#29223); +#29223 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#29224 = LINE('',#29225,#29226); +#29225 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#29226 = VECTOR('',#29227,1.); +#29227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29228 = ORIENTED_EDGE('',*,*,#29229,.F.); +#29229 = EDGE_CURVE('',#29230,#29222,#29232,.T.); +#29230 = VERTEX_POINT('',#29231); +#29231 = CARTESIAN_POINT('',(-0.1,-14.94,0.9)); +#29232 = LINE('',#29233,#29234); +#29233 = CARTESIAN_POINT('',(-0.1,-14.94,6.055738799212)); +#29234 = VECTOR('',#29235,1.); +#29235 = DIRECTION('',(0.,-0.,1.)); +#29236 = ORIENTED_EDGE('',*,*,#29237,.T.); +#29237 = EDGE_CURVE('',#29230,#29238,#29240,.T.); +#29238 = VERTEX_POINT('',#29239); +#29239 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#29240 = LINE('',#29241,#29242); +#29241 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#29242 = VECTOR('',#29243,1.); +#29243 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29244 = ORIENTED_EDGE('',*,*,#29245,.F.); +#29245 = EDGE_CURVE('',#23894,#29238,#29246,.T.); +#29246 = LINE('',#29247,#29248); +#29247 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#29248 = VECTOR('',#29249,1.); +#29249 = DIRECTION('',(0.,-0.,-1.)); +#29250 = PLANE('',#29251); +#29251 = AXIS2_PLACEMENT_3D('',#29252,#29253,#29254); +#29252 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#29253 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29255 = ADVANCED_FACE('',(#29256),#29274,.F.); +#29256 = FACE_BOUND('',#29257,.F.); +#29257 = EDGE_LOOP('',(#29258,#29259,#29267,#29273)); +#29258 = ORIENTED_EDGE('',*,*,#29245,.T.); +#29259 = ORIENTED_EDGE('',*,*,#29260,.T.); +#29260 = EDGE_CURVE('',#29238,#29261,#29263,.T.); +#29261 = VERTEX_POINT('',#29262); +#29262 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#29263 = LINE('',#29264,#29265); +#29264 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#29265 = VECTOR('',#29266,1.); +#29266 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29267 = ORIENTED_EDGE('',*,*,#29268,.F.); +#29268 = EDGE_CURVE('',#23918,#29261,#29269,.T.); +#29269 = LINE('',#29270,#29271); +#29270 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#29271 = VECTOR('',#29272,1.); +#29272 = DIRECTION('',(0.,-0.,-1.)); +#29273 = ORIENTED_EDGE('',*,*,#23925,.F.); +#29274 = PLANE('',#29275); +#29275 = AXIS2_PLACEMENT_3D('',#29276,#29277,#29278); +#29276 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#29277 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29278 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29279 = ADVANCED_FACE('',(#29280),#29323,.F.); +#29280 = FACE_BOUND('',#29281,.F.); +#29281 = EDGE_LOOP('',(#29282,#29283,#29284,#29292,#29300,#29308,#29316, + #29322)); +#29282 = ORIENTED_EDGE('',*,*,#23942,.F.); +#29283 = ORIENTED_EDGE('',*,*,#29268,.T.); +#29284 = ORIENTED_EDGE('',*,*,#29285,.T.); +#29285 = EDGE_CURVE('',#29261,#29286,#29288,.T.); +#29286 = VERTEX_POINT('',#29287); +#29287 = CARTESIAN_POINT('',(-0.1,-15.54,0.9)); +#29288 = LINE('',#29289,#29290); +#29289 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#29290 = VECTOR('',#29291,1.); +#29291 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29292 = ORIENTED_EDGE('',*,*,#29293,.F.); +#29293 = EDGE_CURVE('',#29294,#29286,#29296,.T.); +#29294 = VERTEX_POINT('',#29295); +#29295 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#29296 = LINE('',#29297,#29298); +#29297 = CARTESIAN_POINT('',(-0.1,-15.54,6.055738799212)); +#29298 = VECTOR('',#29299,1.); +#29299 = DIRECTION('',(-0.,0.,-1.)); +#29300 = ORIENTED_EDGE('',*,*,#29301,.T.); +#29301 = EDGE_CURVE('',#29294,#29302,#29304,.T.); +#29302 = VERTEX_POINT('',#29303); +#29303 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#29304 = LINE('',#29305,#29306); +#29305 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#29306 = VECTOR('',#29307,1.); +#29307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29308 = ORIENTED_EDGE('',*,*,#29309,.T.); +#29309 = EDGE_CURVE('',#29302,#29310,#29312,.T.); +#29310 = VERTEX_POINT('',#29311); +#29311 = CARTESIAN_POINT('',(0.1,-15.54,0.9)); +#29312 = LINE('',#29313,#29314); +#29313 = CARTESIAN_POINT('',(0.1,-15.54,6.055738799212)); +#29314 = VECTOR('',#29315,1.); +#29315 = DIRECTION('',(-0.,0.,-1.)); +#29316 = ORIENTED_EDGE('',*,*,#29317,.T.); +#29317 = EDGE_CURVE('',#29310,#29173,#29318,.T.); +#29318 = LINE('',#29319,#29320); +#29319 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#29320 = VECTOR('',#29321,1.); +#29321 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29322 = ORIENTED_EDGE('',*,*,#29172,.F.); +#29323 = PLANE('',#29324); +#29324 = AXIS2_PLACEMENT_3D('',#29325,#29326,#29327); +#29325 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#29326 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29327 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29328 = ADVANCED_FACE('',(#29329),#29354,.F.); +#29329 = FACE_BOUND('',#29330,.F.); +#29330 = EDGE_LOOP('',(#29331,#29339,#29347,#29353)); +#29331 = ORIENTED_EDGE('',*,*,#29332,.T.); +#29332 = EDGE_CURVE('',#23957,#29333,#29335,.T.); +#29333 = VERTEX_POINT('',#29334); +#29334 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#29335 = LINE('',#29336,#29337); +#29336 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#29337 = VECTOR('',#29338,1.); +#29338 = DIRECTION('',(0.,-0.,-1.)); +#29339 = ORIENTED_EDGE('',*,*,#29340,.T.); +#29340 = EDGE_CURVE('',#29333,#29341,#29343,.T.); +#29341 = VERTEX_POINT('',#29342); +#29342 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#29343 = LINE('',#29344,#29345); +#29344 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#29345 = VECTOR('',#29346,1.); +#29346 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29347 = ORIENTED_EDGE('',*,*,#29348,.F.); +#29348 = EDGE_CURVE('',#23966,#29341,#29349,.T.); +#29349 = LINE('',#29350,#29351); +#29350 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#29351 = VECTOR('',#29352,1.); +#29352 = DIRECTION('',(0.,-0.,-1.)); +#29353 = ORIENTED_EDGE('',*,*,#23973,.F.); +#29354 = PLANE('',#29355); +#29355 = AXIS2_PLACEMENT_3D('',#29356,#29357,#29358); +#29356 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#29357 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29358 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29359 = ADVANCED_FACE('',(#29360),#29410,.F.); +#29360 = FACE_BOUND('',#29361,.F.); +#29361 = EDGE_LOOP('',(#29362,#29363,#29364,#29372,#29380,#29388,#29396, + #29404)); +#29362 = ORIENTED_EDGE('',*,*,#23997,.F.); +#29363 = ORIENTED_EDGE('',*,*,#29348,.T.); +#29364 = ORIENTED_EDGE('',*,*,#29365,.T.); +#29365 = EDGE_CURVE('',#29341,#29366,#29368,.T.); +#29366 = VERTEX_POINT('',#29367); +#29367 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#29368 = LINE('',#29369,#29370); +#29369 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#29370 = VECTOR('',#29371,1.); +#29371 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29372 = ORIENTED_EDGE('',*,*,#29373,.T.); +#29373 = EDGE_CURVE('',#29366,#29374,#29376,.T.); +#29374 = VERTEX_POINT('',#29375); +#29375 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#29376 = LINE('',#29377,#29378); +#29377 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#29378 = VECTOR('',#29379,1.); +#29379 = DIRECTION('',(0.,-0.,1.)); +#29380 = ORIENTED_EDGE('',*,*,#29381,.F.); +#29381 = EDGE_CURVE('',#29382,#29374,#29384,.T.); +#29382 = VERTEX_POINT('',#29383); +#29383 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#29384 = LINE('',#29385,#29386); +#29385 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#29386 = VECTOR('',#29387,1.); +#29387 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29388 = ORIENTED_EDGE('',*,*,#29389,.F.); +#29389 = EDGE_CURVE('',#29390,#29382,#29392,.T.); +#29390 = VERTEX_POINT('',#29391); +#29391 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#29392 = LINE('',#29393,#29394); +#29393 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#29394 = VECTOR('',#29395,1.); +#29395 = DIRECTION('',(0.,-0.,1.)); +#29396 = ORIENTED_EDGE('',*,*,#29397,.T.); +#29397 = EDGE_CURVE('',#29390,#29398,#29400,.T.); +#29398 = VERTEX_POINT('',#29399); +#29399 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#29400 = LINE('',#29401,#29402); +#29401 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#29402 = VECTOR('',#29403,1.); +#29403 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29404 = ORIENTED_EDGE('',*,*,#29405,.F.); +#29405 = EDGE_CURVE('',#23990,#29398,#29406,.T.); +#29406 = LINE('',#29407,#29408); +#29407 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#29408 = VECTOR('',#29409,1.); +#29409 = DIRECTION('',(0.,-0.,-1.)); +#29410 = PLANE('',#29411); +#29411 = AXIS2_PLACEMENT_3D('',#29412,#29413,#29414); +#29412 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#29413 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29414 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29415 = ADVANCED_FACE('',(#29416),#29434,.F.); +#29416 = FACE_BOUND('',#29417,.F.); +#29417 = EDGE_LOOP('',(#29418,#29419,#29427,#29433)); +#29418 = ORIENTED_EDGE('',*,*,#29405,.T.); +#29419 = ORIENTED_EDGE('',*,*,#29420,.T.); +#29420 = EDGE_CURVE('',#29398,#29421,#29423,.T.); +#29421 = VERTEX_POINT('',#29422); +#29422 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#29423 = LINE('',#29424,#29425); +#29424 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#29425 = VECTOR('',#29426,1.); +#29426 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29427 = ORIENTED_EDGE('',*,*,#29428,.F.); +#29428 = EDGE_CURVE('',#24014,#29421,#29429,.T.); +#29429 = LINE('',#29430,#29431); +#29430 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#29431 = VECTOR('',#29432,1.); +#29432 = DIRECTION('',(0.,-0.,-1.)); +#29433 = ORIENTED_EDGE('',*,*,#24021,.F.); +#29434 = PLANE('',#29435); +#29435 = AXIS2_PLACEMENT_3D('',#29436,#29437,#29438); +#29436 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#29437 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29438 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29439 = ADVANCED_FACE('',(#29440),#29483,.F.); +#29440 = FACE_BOUND('',#29441,.F.); +#29441 = EDGE_LOOP('',(#29442,#29443,#29444,#29452,#29460,#29468,#29476, + #29482)); +#29442 = ORIENTED_EDGE('',*,*,#24038,.F.); +#29443 = ORIENTED_EDGE('',*,*,#29428,.T.); +#29444 = ORIENTED_EDGE('',*,*,#29445,.T.); +#29445 = EDGE_CURVE('',#29421,#29446,#29448,.T.); +#29446 = VERTEX_POINT('',#29447); +#29447 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#29448 = LINE('',#29449,#29450); +#29449 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#29450 = VECTOR('',#29451,1.); +#29451 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29452 = ORIENTED_EDGE('',*,*,#29453,.F.); +#29453 = EDGE_CURVE('',#29454,#29446,#29456,.T.); +#29454 = VERTEX_POINT('',#29455); +#29455 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#29456 = LINE('',#29457,#29458); +#29457 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#29458 = VECTOR('',#29459,1.); +#29459 = DIRECTION('',(-0.,0.,-1.)); +#29460 = ORIENTED_EDGE('',*,*,#29461,.T.); +#29461 = EDGE_CURVE('',#29454,#29462,#29464,.T.); +#29462 = VERTEX_POINT('',#29463); +#29463 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#29464 = LINE('',#29465,#29466); +#29465 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#29466 = VECTOR('',#29467,1.); +#29467 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29468 = ORIENTED_EDGE('',*,*,#29469,.T.); +#29469 = EDGE_CURVE('',#29462,#29470,#29472,.T.); +#29470 = VERTEX_POINT('',#29471); +#29471 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#29472 = LINE('',#29473,#29474); +#29473 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#29474 = VECTOR('',#29475,1.); +#29475 = DIRECTION('',(-0.,0.,-1.)); +#29476 = ORIENTED_EDGE('',*,*,#29477,.T.); +#29477 = EDGE_CURVE('',#29470,#29333,#29478,.T.); +#29478 = LINE('',#29479,#29480); +#29479 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#29480 = VECTOR('',#29481,1.); +#29481 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29482 = ORIENTED_EDGE('',*,*,#29332,.F.); +#29483 = PLANE('',#29484); +#29484 = AXIS2_PLACEMENT_3D('',#29485,#29486,#29487); +#29485 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#29486 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29487 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29488 = ADVANCED_FACE('',(#29489),#29514,.F.); +#29489 = FACE_BOUND('',#29490,.F.); +#29490 = EDGE_LOOP('',(#29491,#29499,#29507,#29513)); +#29491 = ORIENTED_EDGE('',*,*,#29492,.T.); +#29492 = EDGE_CURVE('',#24053,#29493,#29495,.T.); +#29493 = VERTEX_POINT('',#29494); +#29494 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#29495 = LINE('',#29496,#29497); +#29496 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#29497 = VECTOR('',#29498,1.); +#29498 = DIRECTION('',(0.,-0.,-1.)); +#29499 = ORIENTED_EDGE('',*,*,#29500,.T.); +#29500 = EDGE_CURVE('',#29493,#29501,#29503,.T.); +#29501 = VERTEX_POINT('',#29502); +#29502 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#29503 = LINE('',#29504,#29505); +#29504 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#29505 = VECTOR('',#29506,1.); +#29506 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29507 = ORIENTED_EDGE('',*,*,#29508,.F.); +#29508 = EDGE_CURVE('',#24062,#29501,#29509,.T.); +#29509 = LINE('',#29510,#29511); +#29510 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#29511 = VECTOR('',#29512,1.); +#29512 = DIRECTION('',(0.,-0.,-1.)); +#29513 = ORIENTED_EDGE('',*,*,#24069,.F.); +#29514 = PLANE('',#29515); +#29515 = AXIS2_PLACEMENT_3D('',#29516,#29517,#29518); +#29516 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#29517 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29518 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29519 = ADVANCED_FACE('',(#29520),#29570,.F.); +#29520 = FACE_BOUND('',#29521,.F.); +#29521 = EDGE_LOOP('',(#29522,#29523,#29524,#29532,#29540,#29548,#29556, + #29564)); +#29522 = ORIENTED_EDGE('',*,*,#24093,.F.); +#29523 = ORIENTED_EDGE('',*,*,#29508,.T.); +#29524 = ORIENTED_EDGE('',*,*,#29525,.T.); +#29525 = EDGE_CURVE('',#29501,#29526,#29528,.T.); +#29526 = VERTEX_POINT('',#29527); +#29527 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#29528 = LINE('',#29529,#29530); +#29529 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#29530 = VECTOR('',#29531,1.); +#29531 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29532 = ORIENTED_EDGE('',*,*,#29533,.T.); +#29533 = EDGE_CURVE('',#29526,#29534,#29536,.T.); +#29534 = VERTEX_POINT('',#29535); +#29535 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#29536 = LINE('',#29537,#29538); +#29537 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#29538 = VECTOR('',#29539,1.); +#29539 = DIRECTION('',(0.,-0.,1.)); +#29540 = ORIENTED_EDGE('',*,*,#29541,.F.); +#29541 = EDGE_CURVE('',#29542,#29534,#29544,.T.); +#29542 = VERTEX_POINT('',#29543); +#29543 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#29544 = LINE('',#29545,#29546); +#29545 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#29546 = VECTOR('',#29547,1.); +#29547 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29548 = ORIENTED_EDGE('',*,*,#29549,.F.); +#29549 = EDGE_CURVE('',#29550,#29542,#29552,.T.); +#29550 = VERTEX_POINT('',#29551); +#29551 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#29552 = LINE('',#29553,#29554); +#29553 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#29554 = VECTOR('',#29555,1.); +#29555 = DIRECTION('',(0.,-0.,1.)); +#29556 = ORIENTED_EDGE('',*,*,#29557,.T.); +#29557 = EDGE_CURVE('',#29550,#29558,#29560,.T.); +#29558 = VERTEX_POINT('',#29559); +#29559 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#29560 = LINE('',#29561,#29562); +#29561 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#29562 = VECTOR('',#29563,1.); +#29563 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29564 = ORIENTED_EDGE('',*,*,#29565,.F.); +#29565 = EDGE_CURVE('',#24086,#29558,#29566,.T.); +#29566 = LINE('',#29567,#29568); +#29567 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#29568 = VECTOR('',#29569,1.); +#29569 = DIRECTION('',(0.,-0.,-1.)); +#29570 = PLANE('',#29571); +#29571 = AXIS2_PLACEMENT_3D('',#29572,#29573,#29574); +#29572 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#29573 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29574 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29575 = ADVANCED_FACE('',(#29576),#29594,.F.); +#29576 = FACE_BOUND('',#29577,.F.); +#29577 = EDGE_LOOP('',(#29578,#29579,#29587,#29593)); +#29578 = ORIENTED_EDGE('',*,*,#29565,.T.); +#29579 = ORIENTED_EDGE('',*,*,#29580,.T.); +#29580 = EDGE_CURVE('',#29558,#29581,#29583,.T.); +#29581 = VERTEX_POINT('',#29582); +#29582 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#29583 = LINE('',#29584,#29585); +#29584 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#29585 = VECTOR('',#29586,1.); +#29586 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29587 = ORIENTED_EDGE('',*,*,#29588,.F.); +#29588 = EDGE_CURVE('',#24110,#29581,#29589,.T.); +#29589 = LINE('',#29590,#29591); +#29590 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#29591 = VECTOR('',#29592,1.); +#29592 = DIRECTION('',(0.,-0.,-1.)); +#29593 = ORIENTED_EDGE('',*,*,#24117,.F.); +#29594 = PLANE('',#29595); +#29595 = AXIS2_PLACEMENT_3D('',#29596,#29597,#29598); +#29596 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#29597 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29598 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29599 = ADVANCED_FACE('',(#29600),#29643,.F.); +#29600 = FACE_BOUND('',#29601,.F.); +#29601 = EDGE_LOOP('',(#29602,#29603,#29604,#29612,#29620,#29628,#29636, + #29642)); +#29602 = ORIENTED_EDGE('',*,*,#24134,.F.); +#29603 = ORIENTED_EDGE('',*,*,#29588,.T.); +#29604 = ORIENTED_EDGE('',*,*,#29605,.T.); +#29605 = EDGE_CURVE('',#29581,#29606,#29608,.T.); +#29606 = VERTEX_POINT('',#29607); +#29607 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#29608 = LINE('',#29609,#29610); +#29609 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#29610 = VECTOR('',#29611,1.); +#29611 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29612 = ORIENTED_EDGE('',*,*,#29613,.F.); +#29613 = EDGE_CURVE('',#29614,#29606,#29616,.T.); +#29614 = VERTEX_POINT('',#29615); +#29615 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#29616 = LINE('',#29617,#29618); +#29617 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#29618 = VECTOR('',#29619,1.); +#29619 = DIRECTION('',(-0.,0.,-1.)); +#29620 = ORIENTED_EDGE('',*,*,#29621,.T.); +#29621 = EDGE_CURVE('',#29614,#29622,#29624,.T.); +#29622 = VERTEX_POINT('',#29623); +#29623 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#29624 = LINE('',#29625,#29626); +#29625 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#29626 = VECTOR('',#29627,1.); +#29627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29628 = ORIENTED_EDGE('',*,*,#29629,.T.); +#29629 = EDGE_CURVE('',#29622,#29630,#29632,.T.); +#29630 = VERTEX_POINT('',#29631); +#29631 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#29632 = LINE('',#29633,#29634); +#29633 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#29634 = VECTOR('',#29635,1.); +#29635 = DIRECTION('',(-0.,0.,-1.)); +#29636 = ORIENTED_EDGE('',*,*,#29637,.T.); +#29637 = EDGE_CURVE('',#29630,#29493,#29638,.T.); +#29638 = LINE('',#29639,#29640); +#29639 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#29640 = VECTOR('',#29641,1.); +#29641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29642 = ORIENTED_EDGE('',*,*,#29492,.F.); +#29643 = PLANE('',#29644); +#29644 = AXIS2_PLACEMENT_3D('',#29645,#29646,#29647); +#29645 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#29646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29647 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29648 = ADVANCED_FACE('',(#29649),#29674,.F.); +#29649 = FACE_BOUND('',#29650,.F.); +#29650 = EDGE_LOOP('',(#29651,#29659,#29667,#29673)); +#29651 = ORIENTED_EDGE('',*,*,#29652,.T.); +#29652 = EDGE_CURVE('',#24149,#29653,#29655,.T.); +#29653 = VERTEX_POINT('',#29654); +#29654 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#29655 = LINE('',#29656,#29657); +#29656 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#29657 = VECTOR('',#29658,1.); +#29658 = DIRECTION('',(0.,-0.,-1.)); +#29659 = ORIENTED_EDGE('',*,*,#29660,.T.); +#29660 = EDGE_CURVE('',#29653,#29661,#29663,.T.); +#29661 = VERTEX_POINT('',#29662); +#29662 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#29663 = LINE('',#29664,#29665); +#29664 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#29665 = VECTOR('',#29666,1.); +#29666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29667 = ORIENTED_EDGE('',*,*,#29668,.F.); +#29668 = EDGE_CURVE('',#24158,#29661,#29669,.T.); +#29669 = LINE('',#29670,#29671); +#29670 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#29671 = VECTOR('',#29672,1.); +#29672 = DIRECTION('',(0.,-0.,-1.)); +#29673 = ORIENTED_EDGE('',*,*,#24165,.F.); +#29674 = PLANE('',#29675); +#29675 = AXIS2_PLACEMENT_3D('',#29676,#29677,#29678); +#29676 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#29677 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29678 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29679 = ADVANCED_FACE('',(#29680),#29730,.F.); +#29680 = FACE_BOUND('',#29681,.F.); +#29681 = EDGE_LOOP('',(#29682,#29683,#29684,#29692,#29700,#29708,#29716, + #29724)); +#29682 = ORIENTED_EDGE('',*,*,#24189,.F.); +#29683 = ORIENTED_EDGE('',*,*,#29668,.T.); +#29684 = ORIENTED_EDGE('',*,*,#29685,.T.); +#29685 = EDGE_CURVE('',#29661,#29686,#29688,.T.); +#29686 = VERTEX_POINT('',#29687); +#29687 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#29688 = LINE('',#29689,#29690); +#29689 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#29690 = VECTOR('',#29691,1.); +#29691 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29692 = ORIENTED_EDGE('',*,*,#29693,.T.); +#29693 = EDGE_CURVE('',#29686,#29694,#29696,.T.); +#29694 = VERTEX_POINT('',#29695); +#29695 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#29696 = LINE('',#29697,#29698); +#29697 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#29698 = VECTOR('',#29699,1.); +#29699 = DIRECTION('',(0.,-0.,1.)); +#29700 = ORIENTED_EDGE('',*,*,#29701,.F.); +#29701 = EDGE_CURVE('',#29702,#29694,#29704,.T.); +#29702 = VERTEX_POINT('',#29703); +#29703 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#29704 = LINE('',#29705,#29706); +#29705 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#29706 = VECTOR('',#29707,1.); +#29707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29708 = ORIENTED_EDGE('',*,*,#29709,.F.); +#29709 = EDGE_CURVE('',#29710,#29702,#29712,.T.); +#29710 = VERTEX_POINT('',#29711); +#29711 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#29712 = LINE('',#29713,#29714); +#29713 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#29714 = VECTOR('',#29715,1.); +#29715 = DIRECTION('',(0.,-0.,1.)); +#29716 = ORIENTED_EDGE('',*,*,#29717,.T.); +#29717 = EDGE_CURVE('',#29710,#29718,#29720,.T.); +#29718 = VERTEX_POINT('',#29719); +#29719 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#29720 = LINE('',#29721,#29722); +#29721 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#29722 = VECTOR('',#29723,1.); +#29723 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29724 = ORIENTED_EDGE('',*,*,#29725,.F.); +#29725 = EDGE_CURVE('',#24182,#29718,#29726,.T.); +#29726 = LINE('',#29727,#29728); +#29727 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#29728 = VECTOR('',#29729,1.); +#29729 = DIRECTION('',(0.,-0.,-1.)); +#29730 = PLANE('',#29731); +#29731 = AXIS2_PLACEMENT_3D('',#29732,#29733,#29734); +#29732 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#29733 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29734 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29735 = ADVANCED_FACE('',(#29736),#29754,.F.); +#29736 = FACE_BOUND('',#29737,.F.); +#29737 = EDGE_LOOP('',(#29738,#29739,#29747,#29753)); +#29738 = ORIENTED_EDGE('',*,*,#29725,.T.); +#29739 = ORIENTED_EDGE('',*,*,#29740,.T.); +#29740 = EDGE_CURVE('',#29718,#29741,#29743,.T.); +#29741 = VERTEX_POINT('',#29742); +#29742 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#29743 = LINE('',#29744,#29745); +#29744 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#29745 = VECTOR('',#29746,1.); +#29746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29747 = ORIENTED_EDGE('',*,*,#29748,.F.); +#29748 = EDGE_CURVE('',#24206,#29741,#29749,.T.); +#29749 = LINE('',#29750,#29751); +#29750 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#29751 = VECTOR('',#29752,1.); +#29752 = DIRECTION('',(0.,-0.,-1.)); +#29753 = ORIENTED_EDGE('',*,*,#24213,.F.); +#29754 = PLANE('',#29755); +#29755 = AXIS2_PLACEMENT_3D('',#29756,#29757,#29758); +#29756 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#29757 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29758 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29759 = ADVANCED_FACE('',(#29760),#29803,.F.); +#29760 = FACE_BOUND('',#29761,.F.); +#29761 = EDGE_LOOP('',(#29762,#29763,#29764,#29772,#29780,#29788,#29796, + #29802)); +#29762 = ORIENTED_EDGE('',*,*,#24230,.F.); +#29763 = ORIENTED_EDGE('',*,*,#29748,.T.); +#29764 = ORIENTED_EDGE('',*,*,#29765,.T.); +#29765 = EDGE_CURVE('',#29741,#29766,#29768,.T.); +#29766 = VERTEX_POINT('',#29767); +#29767 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#29768 = LINE('',#29769,#29770); +#29769 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#29770 = VECTOR('',#29771,1.); +#29771 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29772 = ORIENTED_EDGE('',*,*,#29773,.F.); +#29773 = EDGE_CURVE('',#29774,#29766,#29776,.T.); +#29774 = VERTEX_POINT('',#29775); +#29775 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#29776 = LINE('',#29777,#29778); +#29777 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#29778 = VECTOR('',#29779,1.); +#29779 = DIRECTION('',(-0.,0.,-1.)); +#29780 = ORIENTED_EDGE('',*,*,#29781,.T.); +#29781 = EDGE_CURVE('',#29774,#29782,#29784,.T.); +#29782 = VERTEX_POINT('',#29783); +#29783 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#29784 = LINE('',#29785,#29786); +#29785 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#29786 = VECTOR('',#29787,1.); +#29787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29788 = ORIENTED_EDGE('',*,*,#29789,.T.); +#29789 = EDGE_CURVE('',#29782,#29790,#29792,.T.); +#29790 = VERTEX_POINT('',#29791); +#29791 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#29792 = LINE('',#29793,#29794); +#29793 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#29794 = VECTOR('',#29795,1.); +#29795 = DIRECTION('',(-0.,0.,-1.)); +#29796 = ORIENTED_EDGE('',*,*,#29797,.T.); +#29797 = EDGE_CURVE('',#29790,#29653,#29798,.T.); +#29798 = LINE('',#29799,#29800); +#29799 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#29800 = VECTOR('',#29801,1.); +#29801 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29802 = ORIENTED_EDGE('',*,*,#29652,.F.); +#29803 = PLANE('',#29804); +#29804 = AXIS2_PLACEMENT_3D('',#29805,#29806,#29807); +#29805 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#29806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29807 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29808 = ADVANCED_FACE('',(#29809),#29834,.F.); +#29809 = FACE_BOUND('',#29810,.F.); +#29810 = EDGE_LOOP('',(#29811,#29819,#29827,#29833)); +#29811 = ORIENTED_EDGE('',*,*,#29812,.T.); +#29812 = EDGE_CURVE('',#24245,#29813,#29815,.T.); +#29813 = VERTEX_POINT('',#29814); +#29814 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#29815 = LINE('',#29816,#29817); +#29816 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#29817 = VECTOR('',#29818,1.); +#29818 = DIRECTION('',(0.,-0.,-1.)); +#29819 = ORIENTED_EDGE('',*,*,#29820,.T.); +#29820 = EDGE_CURVE('',#29813,#29821,#29823,.T.); +#29821 = VERTEX_POINT('',#29822); +#29822 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#29823 = LINE('',#29824,#29825); +#29824 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#29825 = VECTOR('',#29826,1.); +#29826 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29827 = ORIENTED_EDGE('',*,*,#29828,.F.); +#29828 = EDGE_CURVE('',#24254,#29821,#29829,.T.); +#29829 = LINE('',#29830,#29831); +#29830 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#29831 = VECTOR('',#29832,1.); +#29832 = DIRECTION('',(0.,-0.,-1.)); +#29833 = ORIENTED_EDGE('',*,*,#24261,.F.); +#29834 = PLANE('',#29835); +#29835 = AXIS2_PLACEMENT_3D('',#29836,#29837,#29838); +#29836 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#29837 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29838 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29839 = ADVANCED_FACE('',(#29840),#29890,.F.); +#29840 = FACE_BOUND('',#29841,.F.); +#29841 = EDGE_LOOP('',(#29842,#29843,#29844,#29852,#29860,#29868,#29876, + #29884)); +#29842 = ORIENTED_EDGE('',*,*,#24285,.F.); +#29843 = ORIENTED_EDGE('',*,*,#29828,.T.); +#29844 = ORIENTED_EDGE('',*,*,#29845,.T.); +#29845 = EDGE_CURVE('',#29821,#29846,#29848,.T.); +#29846 = VERTEX_POINT('',#29847); +#29847 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#29848 = LINE('',#29849,#29850); +#29849 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#29850 = VECTOR('',#29851,1.); +#29851 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29852 = ORIENTED_EDGE('',*,*,#29853,.T.); +#29853 = EDGE_CURVE('',#29846,#29854,#29856,.T.); +#29854 = VERTEX_POINT('',#29855); +#29855 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#29856 = LINE('',#29857,#29858); +#29857 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#29858 = VECTOR('',#29859,1.); +#29859 = DIRECTION('',(0.,-0.,1.)); +#29860 = ORIENTED_EDGE('',*,*,#29861,.F.); +#29861 = EDGE_CURVE('',#29862,#29854,#29864,.T.); +#29862 = VERTEX_POINT('',#29863); +#29863 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#29864 = LINE('',#29865,#29866); +#29865 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#29866 = VECTOR('',#29867,1.); +#29867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29868 = ORIENTED_EDGE('',*,*,#29869,.F.); +#29869 = EDGE_CURVE('',#29870,#29862,#29872,.T.); +#29870 = VERTEX_POINT('',#29871); +#29871 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#29872 = LINE('',#29873,#29874); +#29873 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#29874 = VECTOR('',#29875,1.); +#29875 = DIRECTION('',(0.,-0.,1.)); +#29876 = ORIENTED_EDGE('',*,*,#29877,.T.); +#29877 = EDGE_CURVE('',#29870,#29878,#29880,.T.); +#29878 = VERTEX_POINT('',#29879); +#29879 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#29880 = LINE('',#29881,#29882); +#29881 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#29882 = VECTOR('',#29883,1.); +#29883 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29884 = ORIENTED_EDGE('',*,*,#29885,.F.); +#29885 = EDGE_CURVE('',#24278,#29878,#29886,.T.); +#29886 = LINE('',#29887,#29888); +#29887 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#29888 = VECTOR('',#29889,1.); +#29889 = DIRECTION('',(0.,-0.,-1.)); +#29890 = PLANE('',#29891); +#29891 = AXIS2_PLACEMENT_3D('',#29892,#29893,#29894); +#29892 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#29893 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29894 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29895 = ADVANCED_FACE('',(#29896),#29914,.F.); +#29896 = FACE_BOUND('',#29897,.F.); +#29897 = EDGE_LOOP('',(#29898,#29899,#29907,#29913)); +#29898 = ORIENTED_EDGE('',*,*,#29885,.T.); +#29899 = ORIENTED_EDGE('',*,*,#29900,.T.); +#29900 = EDGE_CURVE('',#29878,#29901,#29903,.T.); +#29901 = VERTEX_POINT('',#29902); +#29902 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#29903 = LINE('',#29904,#29905); +#29904 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#29905 = VECTOR('',#29906,1.); +#29906 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29907 = ORIENTED_EDGE('',*,*,#29908,.F.); +#29908 = EDGE_CURVE('',#24302,#29901,#29909,.T.); +#29909 = LINE('',#29910,#29911); +#29910 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#29911 = VECTOR('',#29912,1.); +#29912 = DIRECTION('',(0.,-0.,-1.)); +#29913 = ORIENTED_EDGE('',*,*,#24309,.F.); +#29914 = PLANE('',#29915); +#29915 = AXIS2_PLACEMENT_3D('',#29916,#29917,#29918); +#29916 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#29917 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29918 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29919 = ADVANCED_FACE('',(#29920),#29963,.F.); +#29920 = FACE_BOUND('',#29921,.F.); +#29921 = EDGE_LOOP('',(#29922,#29923,#29924,#29932,#29940,#29948,#29956, + #29962)); +#29922 = ORIENTED_EDGE('',*,*,#24326,.F.); +#29923 = ORIENTED_EDGE('',*,*,#29908,.T.); +#29924 = ORIENTED_EDGE('',*,*,#29925,.T.); +#29925 = EDGE_CURVE('',#29901,#29926,#29928,.T.); +#29926 = VERTEX_POINT('',#29927); +#29927 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#29928 = LINE('',#29929,#29930); +#29929 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#29930 = VECTOR('',#29931,1.); +#29931 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29932 = ORIENTED_EDGE('',*,*,#29933,.F.); +#29933 = EDGE_CURVE('',#29934,#29926,#29936,.T.); +#29934 = VERTEX_POINT('',#29935); +#29935 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#29936 = LINE('',#29937,#29938); +#29937 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#29938 = VECTOR('',#29939,1.); +#29939 = DIRECTION('',(-0.,0.,-1.)); +#29940 = ORIENTED_EDGE('',*,*,#29941,.T.); +#29941 = EDGE_CURVE('',#29934,#29942,#29944,.T.); +#29942 = VERTEX_POINT('',#29943); +#29943 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#29944 = LINE('',#29945,#29946); +#29945 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#29946 = VECTOR('',#29947,1.); +#29947 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29948 = ORIENTED_EDGE('',*,*,#29949,.T.); +#29949 = EDGE_CURVE('',#29942,#29950,#29952,.T.); +#29950 = VERTEX_POINT('',#29951); +#29951 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#29952 = LINE('',#29953,#29954); +#29953 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#29954 = VECTOR('',#29955,1.); +#29955 = DIRECTION('',(-0.,0.,-1.)); +#29956 = ORIENTED_EDGE('',*,*,#29957,.T.); +#29957 = EDGE_CURVE('',#29950,#29813,#29958,.T.); +#29958 = LINE('',#29959,#29960); +#29959 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#29960 = VECTOR('',#29961,1.); +#29961 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29962 = ORIENTED_EDGE('',*,*,#29812,.F.); +#29963 = PLANE('',#29964); +#29964 = AXIS2_PLACEMENT_3D('',#29965,#29966,#29967); +#29965 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#29966 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29967 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29968 = ADVANCED_FACE('',(#29969),#29994,.F.); +#29969 = FACE_BOUND('',#29970,.F.); +#29970 = EDGE_LOOP('',(#29971,#29979,#29987,#29993)); +#29971 = ORIENTED_EDGE('',*,*,#29972,.T.); +#29972 = EDGE_CURVE('',#24341,#29973,#29975,.T.); +#29973 = VERTEX_POINT('',#29974); +#29974 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#29975 = LINE('',#29976,#29977); +#29976 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#29977 = VECTOR('',#29978,1.); +#29978 = DIRECTION('',(0.,-0.,-1.)); +#29979 = ORIENTED_EDGE('',*,*,#29980,.T.); +#29980 = EDGE_CURVE('',#29973,#29981,#29983,.T.); +#29981 = VERTEX_POINT('',#29982); +#29982 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#29983 = LINE('',#29984,#29985); +#29984 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#29985 = VECTOR('',#29986,1.); +#29986 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29987 = ORIENTED_EDGE('',*,*,#29988,.F.); +#29988 = EDGE_CURVE('',#24350,#29981,#29989,.T.); +#29989 = LINE('',#29990,#29991); +#29990 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#29991 = VECTOR('',#29992,1.); +#29992 = DIRECTION('',(0.,-0.,-1.)); +#29993 = ORIENTED_EDGE('',*,*,#24357,.F.); +#29994 = PLANE('',#29995); +#29995 = AXIS2_PLACEMENT_3D('',#29996,#29997,#29998); +#29996 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#29997 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29998 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29999 = ADVANCED_FACE('',(#30000),#30050,.F.); +#30000 = FACE_BOUND('',#30001,.F.); +#30001 = EDGE_LOOP('',(#30002,#30003,#30004,#30012,#30020,#30028,#30036, + #30044)); +#30002 = ORIENTED_EDGE('',*,*,#24381,.F.); +#30003 = ORIENTED_EDGE('',*,*,#29988,.T.); +#30004 = ORIENTED_EDGE('',*,*,#30005,.T.); +#30005 = EDGE_CURVE('',#29981,#30006,#30008,.T.); +#30006 = VERTEX_POINT('',#30007); +#30007 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#30008 = LINE('',#30009,#30010); +#30009 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#30010 = VECTOR('',#30011,1.); +#30011 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30012 = ORIENTED_EDGE('',*,*,#30013,.T.); +#30013 = EDGE_CURVE('',#30006,#30014,#30016,.T.); +#30014 = VERTEX_POINT('',#30015); +#30015 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#30016 = LINE('',#30017,#30018); +#30017 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#30018 = VECTOR('',#30019,1.); +#30019 = DIRECTION('',(0.,-0.,1.)); +#30020 = ORIENTED_EDGE('',*,*,#30021,.F.); +#30021 = EDGE_CURVE('',#30022,#30014,#30024,.T.); +#30022 = VERTEX_POINT('',#30023); +#30023 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#30024 = LINE('',#30025,#30026); +#30025 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#30026 = VECTOR('',#30027,1.); +#30027 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30028 = ORIENTED_EDGE('',*,*,#30029,.F.); +#30029 = EDGE_CURVE('',#30030,#30022,#30032,.T.); +#30030 = VERTEX_POINT('',#30031); +#30031 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#30032 = LINE('',#30033,#30034); +#30033 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#30034 = VECTOR('',#30035,1.); +#30035 = DIRECTION('',(0.,-0.,1.)); +#30036 = ORIENTED_EDGE('',*,*,#30037,.T.); +#30037 = EDGE_CURVE('',#30030,#30038,#30040,.T.); +#30038 = VERTEX_POINT('',#30039); +#30039 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#30040 = LINE('',#30041,#30042); +#30041 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#30042 = VECTOR('',#30043,1.); +#30043 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30044 = ORIENTED_EDGE('',*,*,#30045,.F.); +#30045 = EDGE_CURVE('',#24374,#30038,#30046,.T.); +#30046 = LINE('',#30047,#30048); +#30047 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#30048 = VECTOR('',#30049,1.); +#30049 = DIRECTION('',(0.,-0.,-1.)); +#30050 = PLANE('',#30051); +#30051 = AXIS2_PLACEMENT_3D('',#30052,#30053,#30054); +#30052 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#30053 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30054 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30055 = ADVANCED_FACE('',(#30056),#30074,.F.); +#30056 = FACE_BOUND('',#30057,.F.); +#30057 = EDGE_LOOP('',(#30058,#30059,#30067,#30073)); +#30058 = ORIENTED_EDGE('',*,*,#30045,.T.); +#30059 = ORIENTED_EDGE('',*,*,#30060,.T.); +#30060 = EDGE_CURVE('',#30038,#30061,#30063,.T.); +#30061 = VERTEX_POINT('',#30062); +#30062 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#30063 = LINE('',#30064,#30065); +#30064 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#30065 = VECTOR('',#30066,1.); +#30066 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30067 = ORIENTED_EDGE('',*,*,#30068,.F.); +#30068 = EDGE_CURVE('',#24398,#30061,#30069,.T.); +#30069 = LINE('',#30070,#30071); +#30070 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#30071 = VECTOR('',#30072,1.); +#30072 = DIRECTION('',(0.,-0.,-1.)); +#30073 = ORIENTED_EDGE('',*,*,#24405,.F.); +#30074 = PLANE('',#30075); +#30075 = AXIS2_PLACEMENT_3D('',#30076,#30077,#30078); +#30076 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#30077 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30078 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30079 = ADVANCED_FACE('',(#30080),#30123,.F.); +#30080 = FACE_BOUND('',#30081,.F.); +#30081 = EDGE_LOOP('',(#30082,#30083,#30084,#30092,#30100,#30108,#30116, + #30122)); +#30082 = ORIENTED_EDGE('',*,*,#24422,.F.); +#30083 = ORIENTED_EDGE('',*,*,#30068,.T.); +#30084 = ORIENTED_EDGE('',*,*,#30085,.T.); +#30085 = EDGE_CURVE('',#30061,#30086,#30088,.T.); +#30086 = VERTEX_POINT('',#30087); +#30087 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#30088 = LINE('',#30089,#30090); +#30089 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#30090 = VECTOR('',#30091,1.); +#30091 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30092 = ORIENTED_EDGE('',*,*,#30093,.F.); +#30093 = EDGE_CURVE('',#30094,#30086,#30096,.T.); +#30094 = VERTEX_POINT('',#30095); +#30095 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#30096 = LINE('',#30097,#30098); +#30097 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#30098 = VECTOR('',#30099,1.); +#30099 = DIRECTION('',(-0.,0.,-1.)); +#30100 = ORIENTED_EDGE('',*,*,#30101,.T.); +#30101 = EDGE_CURVE('',#30094,#30102,#30104,.T.); +#30102 = VERTEX_POINT('',#30103); +#30103 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#30104 = LINE('',#30105,#30106); +#30105 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#30106 = VECTOR('',#30107,1.); +#30107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30108 = ORIENTED_EDGE('',*,*,#30109,.T.); +#30109 = EDGE_CURVE('',#30102,#30110,#30112,.T.); +#30110 = VERTEX_POINT('',#30111); +#30111 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#30112 = LINE('',#30113,#30114); +#30113 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#30114 = VECTOR('',#30115,1.); +#30115 = DIRECTION('',(-0.,0.,-1.)); +#30116 = ORIENTED_EDGE('',*,*,#30117,.T.); +#30117 = EDGE_CURVE('',#30110,#29973,#30118,.T.); +#30118 = LINE('',#30119,#30120); +#30119 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#30120 = VECTOR('',#30121,1.); +#30121 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30122 = ORIENTED_EDGE('',*,*,#29972,.F.); +#30123 = PLANE('',#30124); +#30124 = AXIS2_PLACEMENT_3D('',#30125,#30126,#30127); +#30125 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#30126 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30127 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30128 = ADVANCED_FACE('',(#30129),#30154,.F.); +#30129 = FACE_BOUND('',#30130,.F.); +#30130 = EDGE_LOOP('',(#30131,#30139,#30147,#30153)); +#30131 = ORIENTED_EDGE('',*,*,#30132,.T.); +#30132 = EDGE_CURVE('',#24437,#30133,#30135,.T.); +#30133 = VERTEX_POINT('',#30134); +#30134 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#30135 = LINE('',#30136,#30137); +#30136 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#30137 = VECTOR('',#30138,1.); +#30138 = DIRECTION('',(0.,-0.,-1.)); +#30139 = ORIENTED_EDGE('',*,*,#30140,.T.); +#30140 = EDGE_CURVE('',#30133,#30141,#30143,.T.); +#30141 = VERTEX_POINT('',#30142); +#30142 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#30143 = LINE('',#30144,#30145); +#30144 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#30145 = VECTOR('',#30146,1.); +#30146 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30147 = ORIENTED_EDGE('',*,*,#30148,.F.); +#30148 = EDGE_CURVE('',#24446,#30141,#30149,.T.); +#30149 = LINE('',#30150,#30151); +#30150 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#30151 = VECTOR('',#30152,1.); +#30152 = DIRECTION('',(0.,-0.,-1.)); +#30153 = ORIENTED_EDGE('',*,*,#24453,.F.); +#30154 = PLANE('',#30155); +#30155 = AXIS2_PLACEMENT_3D('',#30156,#30157,#30158); +#30156 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#30157 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30158 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30159 = ADVANCED_FACE('',(#30160),#30210,.F.); +#30160 = FACE_BOUND('',#30161,.F.); +#30161 = EDGE_LOOP('',(#30162,#30163,#30164,#30172,#30180,#30188,#30196, + #30204)); +#30162 = ORIENTED_EDGE('',*,*,#24477,.F.); +#30163 = ORIENTED_EDGE('',*,*,#30148,.T.); +#30164 = ORIENTED_EDGE('',*,*,#30165,.T.); +#30165 = EDGE_CURVE('',#30141,#30166,#30168,.T.); +#30166 = VERTEX_POINT('',#30167); +#30167 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#30168 = LINE('',#30169,#30170); +#30169 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#30170 = VECTOR('',#30171,1.); +#30171 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30172 = ORIENTED_EDGE('',*,*,#30173,.T.); +#30173 = EDGE_CURVE('',#30166,#30174,#30176,.T.); +#30174 = VERTEX_POINT('',#30175); +#30175 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#30176 = LINE('',#30177,#30178); +#30177 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#30178 = VECTOR('',#30179,1.); +#30179 = DIRECTION('',(0.,-0.,1.)); +#30180 = ORIENTED_EDGE('',*,*,#30181,.F.); +#30181 = EDGE_CURVE('',#30182,#30174,#30184,.T.); +#30182 = VERTEX_POINT('',#30183); +#30183 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#30184 = LINE('',#30185,#30186); +#30185 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#30186 = VECTOR('',#30187,1.); +#30187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30188 = ORIENTED_EDGE('',*,*,#30189,.F.); +#30189 = EDGE_CURVE('',#30190,#30182,#30192,.T.); +#30190 = VERTEX_POINT('',#30191); +#30191 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#30192 = LINE('',#30193,#30194); +#30193 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#30194 = VECTOR('',#30195,1.); +#30195 = DIRECTION('',(0.,-0.,1.)); +#30196 = ORIENTED_EDGE('',*,*,#30197,.T.); +#30197 = EDGE_CURVE('',#30190,#30198,#30200,.T.); +#30198 = VERTEX_POINT('',#30199); +#30199 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#30200 = LINE('',#30201,#30202); +#30201 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#30202 = VECTOR('',#30203,1.); +#30203 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30204 = ORIENTED_EDGE('',*,*,#30205,.F.); +#30205 = EDGE_CURVE('',#24470,#30198,#30206,.T.); +#30206 = LINE('',#30207,#30208); +#30207 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#30208 = VECTOR('',#30209,1.); +#30209 = DIRECTION('',(0.,-0.,-1.)); +#30210 = PLANE('',#30211); +#30211 = AXIS2_PLACEMENT_3D('',#30212,#30213,#30214); +#30212 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#30213 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30214 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30215 = ADVANCED_FACE('',(#30216),#30234,.F.); +#30216 = FACE_BOUND('',#30217,.F.); +#30217 = EDGE_LOOP('',(#30218,#30219,#30227,#30233)); +#30218 = ORIENTED_EDGE('',*,*,#30205,.T.); +#30219 = ORIENTED_EDGE('',*,*,#30220,.T.); +#30220 = EDGE_CURVE('',#30198,#30221,#30223,.T.); +#30221 = VERTEX_POINT('',#30222); +#30222 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#30223 = LINE('',#30224,#30225); +#30224 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#30225 = VECTOR('',#30226,1.); +#30226 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30227 = ORIENTED_EDGE('',*,*,#30228,.F.); +#30228 = EDGE_CURVE('',#24494,#30221,#30229,.T.); +#30229 = LINE('',#30230,#30231); +#30230 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#30231 = VECTOR('',#30232,1.); +#30232 = DIRECTION('',(0.,-0.,-1.)); +#30233 = ORIENTED_EDGE('',*,*,#24501,.F.); +#30234 = PLANE('',#30235); +#30235 = AXIS2_PLACEMENT_3D('',#30236,#30237,#30238); +#30236 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#30237 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30238 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30239 = ADVANCED_FACE('',(#30240),#30283,.F.); +#30240 = FACE_BOUND('',#30241,.F.); +#30241 = EDGE_LOOP('',(#30242,#30243,#30244,#30252,#30260,#30268,#30276, + #30282)); +#30242 = ORIENTED_EDGE('',*,*,#24518,.F.); +#30243 = ORIENTED_EDGE('',*,*,#30228,.T.); +#30244 = ORIENTED_EDGE('',*,*,#30245,.T.); +#30245 = EDGE_CURVE('',#30221,#30246,#30248,.T.); +#30246 = VERTEX_POINT('',#30247); +#30247 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#30248 = LINE('',#30249,#30250); +#30249 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#30250 = VECTOR('',#30251,1.); +#30251 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30252 = ORIENTED_EDGE('',*,*,#30253,.F.); +#30253 = EDGE_CURVE('',#30254,#30246,#30256,.T.); +#30254 = VERTEX_POINT('',#30255); +#30255 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#30256 = LINE('',#30257,#30258); +#30257 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#30258 = VECTOR('',#30259,1.); +#30259 = DIRECTION('',(-0.,0.,-1.)); +#30260 = ORIENTED_EDGE('',*,*,#30261,.T.); +#30261 = EDGE_CURVE('',#30254,#30262,#30264,.T.); +#30262 = VERTEX_POINT('',#30263); +#30263 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#30264 = LINE('',#30265,#30266); +#30265 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#30266 = VECTOR('',#30267,1.); +#30267 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30268 = ORIENTED_EDGE('',*,*,#30269,.T.); +#30269 = EDGE_CURVE('',#30262,#30270,#30272,.T.); +#30270 = VERTEX_POINT('',#30271); +#30271 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#30272 = LINE('',#30273,#30274); +#30273 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#30274 = VECTOR('',#30275,1.); +#30275 = DIRECTION('',(-0.,0.,-1.)); +#30276 = ORIENTED_EDGE('',*,*,#30277,.T.); +#30277 = EDGE_CURVE('',#30270,#30133,#30278,.T.); +#30278 = LINE('',#30279,#30280); +#30279 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#30280 = VECTOR('',#30281,1.); +#30281 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30282 = ORIENTED_EDGE('',*,*,#30132,.F.); +#30283 = PLANE('',#30284); +#30284 = AXIS2_PLACEMENT_3D('',#30285,#30286,#30287); +#30285 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#30286 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30287 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30288 = ADVANCED_FACE('',(#30289),#30300,.T.); +#30289 = FACE_BOUND('',#30290,.T.); +#30290 = EDGE_LOOP('',(#30291,#30297,#30298,#30299)); +#30291 = ORIENTED_EDGE('',*,*,#30292,.T.); +#30292 = EDGE_CURVE('',#24614,#24550,#30293,.T.); +#30293 = LINE('',#30294,#30295); +#30294 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#30295 = VECTOR('',#30296,1.); +#30296 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30297 = ORIENTED_EDGE('',*,*,#24549,.T.); +#30298 = ORIENTED_EDGE('',*,*,#24534,.F.); +#30299 = ORIENTED_EDGE('',*,*,#24613,.F.); +#30300 = PLANE('',#30301); +#30301 = AXIS2_PLACEMENT_3D('',#30302,#30303,#30304); +#30302 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#30303 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30304 = DIRECTION('',(0.,0.,1.)); +#30305 = ADVANCED_FACE('',(#30306),#30317,.T.); +#30306 = FACE_BOUND('',#30307,.T.); +#30307 = EDGE_LOOP('',(#30308,#30314,#30315,#30316)); +#30308 = ORIENTED_EDGE('',*,*,#30309,.T.); +#30309 = EDGE_CURVE('',#24639,#24575,#30310,.T.); +#30310 = LINE('',#30311,#30312); +#30311 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#30312 = VECTOR('',#30313,1.); +#30313 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30314 = ORIENTED_EDGE('',*,*,#24582,.T.); +#30315 = ORIENTED_EDGE('',*,*,#30292,.F.); +#30316 = ORIENTED_EDGE('',*,*,#24646,.F.); +#30317 = PLANE('',#30318); +#30318 = AXIS2_PLACEMENT_3D('',#30319,#30320,#30321); +#30319 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#30320 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30321 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30322 = ADVANCED_FACE('',(#30323),#30334,.T.); +#30323 = FACE_BOUND('',#30324,.T.); +#30324 = EDGE_LOOP('',(#30325,#30331,#30332,#30333)); +#30325 = ORIENTED_EDGE('',*,*,#30326,.T.); +#30326 = EDGE_CURVE('',#24631,#24567,#30327,.T.); +#30327 = LINE('',#30328,#30329); +#30328 = CARTESIAN_POINT('',(-0.1,-48.11,-3.1)); +#30329 = VECTOR('',#30330,1.); +#30330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30331 = ORIENTED_EDGE('',*,*,#24574,.T.); +#30332 = ORIENTED_EDGE('',*,*,#30309,.F.); +#30333 = ORIENTED_EDGE('',*,*,#24638,.T.); +#30334 = PLANE('',#30335); +#30335 = AXIS2_PLACEMENT_3D('',#30336,#30337,#30338); +#30336 = CARTESIAN_POINT('',(-0.1,-48.11,-3.1)); +#30337 = DIRECTION('',(0.,-0.,-1.)); +#30338 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30339 = ADVANCED_FACE('',(#30340),#30351,.T.); +#30340 = FACE_BOUND('',#30341,.T.); +#30341 = EDGE_LOOP('',(#30342,#30348,#30349,#30350)); +#30342 = ORIENTED_EDGE('',*,*,#30343,.T.); +#30343 = EDGE_CURVE('',#24623,#24559,#30344,.T.); +#30344 = LINE('',#30345,#30346); +#30345 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#30346 = VECTOR('',#30347,1.); +#30347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30348 = ORIENTED_EDGE('',*,*,#24566,.T.); +#30349 = ORIENTED_EDGE('',*,*,#30326,.F.); +#30350 = ORIENTED_EDGE('',*,*,#24630,.F.); +#30351 = PLANE('',#30352); +#30352 = AXIS2_PLACEMENT_3D('',#30353,#30354,#30355); +#30353 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#30354 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30355 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30356 = ADVANCED_FACE('',(#30357),#30363,.T.); +#30357 = FACE_BOUND('',#30358,.T.); +#30358 = EDGE_LOOP('',(#30359,#30360,#30361,#30362)); +#30359 = ORIENTED_EDGE('',*,*,#24596,.T.); +#30360 = ORIENTED_EDGE('',*,*,#24558,.T.); +#30361 = ORIENTED_EDGE('',*,*,#30343,.F.); +#30362 = ORIENTED_EDGE('',*,*,#24622,.F.); +#30363 = PLANE('',#30364); +#30364 = AXIS2_PLACEMENT_3D('',#30365,#30366,#30367); +#30365 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#30366 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30367 = DIRECTION('',(0.,0.,-1.)); +#30368 = ADVANCED_FACE('',(#30369),#30380,.T.); +#30369 = FACE_BOUND('',#30370,.T.); +#30370 = EDGE_LOOP('',(#30371,#30377,#30378,#30379)); +#30371 = ORIENTED_EDGE('',*,*,#30372,.T.); +#30372 = EDGE_CURVE('',#24742,#24678,#30373,.T.); +#30373 = LINE('',#30374,#30375); +#30374 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#30375 = VECTOR('',#30376,1.); +#30376 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30377 = ORIENTED_EDGE('',*,*,#24677,.T.); +#30378 = ORIENTED_EDGE('',*,*,#24662,.F.); +#30379 = ORIENTED_EDGE('',*,*,#24741,.F.); +#30380 = PLANE('',#30381); +#30381 = AXIS2_PLACEMENT_3D('',#30382,#30383,#30384); +#30382 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#30383 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30384 = DIRECTION('',(0.,0.,1.)); +#30385 = ADVANCED_FACE('',(#30386),#30397,.T.); +#30386 = FACE_BOUND('',#30387,.T.); +#30387 = EDGE_LOOP('',(#30388,#30394,#30395,#30396)); +#30388 = ORIENTED_EDGE('',*,*,#30389,.T.); +#30389 = EDGE_CURVE('',#24767,#24703,#30390,.T.); +#30390 = LINE('',#30391,#30392); +#30391 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#30392 = VECTOR('',#30393,1.); +#30393 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30394 = ORIENTED_EDGE('',*,*,#24710,.T.); +#30395 = ORIENTED_EDGE('',*,*,#30372,.F.); +#30396 = ORIENTED_EDGE('',*,*,#24774,.F.); +#30397 = PLANE('',#30398); +#30398 = AXIS2_PLACEMENT_3D('',#30399,#30400,#30401); +#30399 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#30400 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30401 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30402 = ADVANCED_FACE('',(#30403),#30414,.T.); +#30403 = FACE_BOUND('',#30404,.T.); +#30404 = EDGE_LOOP('',(#30405,#30411,#30412,#30413)); +#30405 = ORIENTED_EDGE('',*,*,#30406,.T.); +#30406 = EDGE_CURVE('',#24759,#24695,#30407,.T.); +#30407 = LINE('',#30408,#30409); +#30408 = CARTESIAN_POINT('',(-0.1,-45.57,-3.1)); +#30409 = VECTOR('',#30410,1.); +#30410 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30411 = ORIENTED_EDGE('',*,*,#24702,.T.); +#30412 = ORIENTED_EDGE('',*,*,#30389,.F.); +#30413 = ORIENTED_EDGE('',*,*,#24766,.T.); +#30414 = PLANE('',#30415); +#30415 = AXIS2_PLACEMENT_3D('',#30416,#30417,#30418); +#30416 = CARTESIAN_POINT('',(-0.1,-45.57,-3.1)); +#30417 = DIRECTION('',(0.,-0.,-1.)); +#30418 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30419 = ADVANCED_FACE('',(#30420),#30431,.T.); +#30420 = FACE_BOUND('',#30421,.T.); +#30421 = EDGE_LOOP('',(#30422,#30428,#30429,#30430)); +#30422 = ORIENTED_EDGE('',*,*,#30423,.T.); +#30423 = EDGE_CURVE('',#24751,#24687,#30424,.T.); +#30424 = LINE('',#30425,#30426); +#30425 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#30426 = VECTOR('',#30427,1.); +#30427 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30428 = ORIENTED_EDGE('',*,*,#24694,.T.); +#30429 = ORIENTED_EDGE('',*,*,#30406,.F.); +#30430 = ORIENTED_EDGE('',*,*,#24758,.F.); +#30431 = PLANE('',#30432); +#30432 = AXIS2_PLACEMENT_3D('',#30433,#30434,#30435); +#30433 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#30434 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30435 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30436 = ADVANCED_FACE('',(#30437),#30443,.T.); +#30437 = FACE_BOUND('',#30438,.T.); +#30438 = EDGE_LOOP('',(#30439,#30440,#30441,#30442)); +#30439 = ORIENTED_EDGE('',*,*,#24724,.T.); +#30440 = ORIENTED_EDGE('',*,*,#24686,.T.); +#30441 = ORIENTED_EDGE('',*,*,#30423,.F.); +#30442 = ORIENTED_EDGE('',*,*,#24750,.F.); +#30443 = PLANE('',#30444); +#30444 = AXIS2_PLACEMENT_3D('',#30445,#30446,#30447); +#30445 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#30446 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30447 = DIRECTION('',(0.,0.,-1.)); +#30448 = ADVANCED_FACE('',(#30449),#30460,.T.); +#30449 = FACE_BOUND('',#30450,.T.); +#30450 = EDGE_LOOP('',(#30451,#30457,#30458,#30459)); +#30451 = ORIENTED_EDGE('',*,*,#30452,.T.); +#30452 = EDGE_CURVE('',#24870,#24806,#30453,.T.); +#30453 = LINE('',#30454,#30455); +#30454 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#30455 = VECTOR('',#30456,1.); +#30456 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30457 = ORIENTED_EDGE('',*,*,#24805,.T.); +#30458 = ORIENTED_EDGE('',*,*,#24790,.F.); +#30459 = ORIENTED_EDGE('',*,*,#24869,.F.); +#30460 = PLANE('',#30461); +#30461 = AXIS2_PLACEMENT_3D('',#30462,#30463,#30464); +#30462 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#30463 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30464 = DIRECTION('',(0.,0.,1.)); +#30465 = ADVANCED_FACE('',(#30466),#30477,.T.); +#30466 = FACE_BOUND('',#30467,.T.); +#30467 = EDGE_LOOP('',(#30468,#30474,#30475,#30476)); +#30468 = ORIENTED_EDGE('',*,*,#30469,.T.); +#30469 = EDGE_CURVE('',#24895,#24831,#30470,.T.); +#30470 = LINE('',#30471,#30472); +#30471 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#30472 = VECTOR('',#30473,1.); +#30473 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30474 = ORIENTED_EDGE('',*,*,#24838,.T.); +#30475 = ORIENTED_EDGE('',*,*,#30452,.F.); +#30476 = ORIENTED_EDGE('',*,*,#24902,.F.); +#30477 = PLANE('',#30478); +#30478 = AXIS2_PLACEMENT_3D('',#30479,#30480,#30481); +#30479 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#30480 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30481 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30482 = ADVANCED_FACE('',(#30483),#30494,.T.); +#30483 = FACE_BOUND('',#30484,.T.); +#30484 = EDGE_LOOP('',(#30485,#30491,#30492,#30493)); +#30485 = ORIENTED_EDGE('',*,*,#30486,.T.); +#30486 = EDGE_CURVE('',#24887,#24823,#30487,.T.); +#30487 = LINE('',#30488,#30489); +#30488 = CARTESIAN_POINT('',(-0.1,-43.03,-3.1)); +#30489 = VECTOR('',#30490,1.); +#30490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30491 = ORIENTED_EDGE('',*,*,#24830,.T.); +#30492 = ORIENTED_EDGE('',*,*,#30469,.F.); +#30493 = ORIENTED_EDGE('',*,*,#24894,.T.); +#30494 = PLANE('',#30495); +#30495 = AXIS2_PLACEMENT_3D('',#30496,#30497,#30498); +#30496 = CARTESIAN_POINT('',(-0.1,-43.03,-3.1)); +#30497 = DIRECTION('',(0.,-0.,-1.)); +#30498 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30499 = ADVANCED_FACE('',(#30500),#30511,.T.); +#30500 = FACE_BOUND('',#30501,.T.); +#30501 = EDGE_LOOP('',(#30502,#30508,#30509,#30510)); +#30502 = ORIENTED_EDGE('',*,*,#30503,.T.); +#30503 = EDGE_CURVE('',#24879,#24815,#30504,.T.); +#30504 = LINE('',#30505,#30506); +#30505 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#30506 = VECTOR('',#30507,1.); +#30507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30508 = ORIENTED_EDGE('',*,*,#24822,.T.); +#30509 = ORIENTED_EDGE('',*,*,#30486,.F.); +#30510 = ORIENTED_EDGE('',*,*,#24886,.F.); +#30511 = PLANE('',#30512); +#30512 = AXIS2_PLACEMENT_3D('',#30513,#30514,#30515); +#30513 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#30514 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30515 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30516 = ADVANCED_FACE('',(#30517),#30523,.T.); +#30517 = FACE_BOUND('',#30518,.T.); +#30518 = EDGE_LOOP('',(#30519,#30520,#30521,#30522)); +#30519 = ORIENTED_EDGE('',*,*,#24852,.T.); +#30520 = ORIENTED_EDGE('',*,*,#24814,.T.); +#30521 = ORIENTED_EDGE('',*,*,#30503,.F.); +#30522 = ORIENTED_EDGE('',*,*,#24878,.F.); +#30523 = PLANE('',#30524); +#30524 = AXIS2_PLACEMENT_3D('',#30525,#30526,#30527); +#30525 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#30526 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30527 = DIRECTION('',(0.,0.,-1.)); +#30528 = ADVANCED_FACE('',(#30529),#30540,.T.); +#30529 = FACE_BOUND('',#30530,.T.); +#30530 = EDGE_LOOP('',(#30531,#30537,#30538,#30539)); +#30531 = ORIENTED_EDGE('',*,*,#30532,.T.); +#30532 = EDGE_CURVE('',#24998,#24934,#30533,.T.); +#30533 = LINE('',#30534,#30535); +#30534 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#30535 = VECTOR('',#30536,1.); +#30536 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30537 = ORIENTED_EDGE('',*,*,#24933,.T.); +#30538 = ORIENTED_EDGE('',*,*,#24918,.F.); +#30539 = ORIENTED_EDGE('',*,*,#24997,.F.); +#30540 = PLANE('',#30541); +#30541 = AXIS2_PLACEMENT_3D('',#30542,#30543,#30544); +#30542 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#30543 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30544 = DIRECTION('',(0.,0.,1.)); +#30545 = ADVANCED_FACE('',(#30546),#30557,.T.); +#30546 = FACE_BOUND('',#30547,.T.); +#30547 = EDGE_LOOP('',(#30548,#30554,#30555,#30556)); +#30548 = ORIENTED_EDGE('',*,*,#30549,.T.); +#30549 = EDGE_CURVE('',#25023,#24959,#30550,.T.); +#30550 = LINE('',#30551,#30552); +#30551 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#30552 = VECTOR('',#30553,1.); +#30553 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30554 = ORIENTED_EDGE('',*,*,#24966,.T.); +#30555 = ORIENTED_EDGE('',*,*,#30532,.F.); +#30556 = ORIENTED_EDGE('',*,*,#25030,.F.); +#30557 = PLANE('',#30558); +#30558 = AXIS2_PLACEMENT_3D('',#30559,#30560,#30561); +#30559 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#30560 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30561 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30562 = ADVANCED_FACE('',(#30563),#30574,.T.); +#30563 = FACE_BOUND('',#30564,.T.); +#30564 = EDGE_LOOP('',(#30565,#30571,#30572,#30573)); +#30565 = ORIENTED_EDGE('',*,*,#30566,.T.); +#30566 = EDGE_CURVE('',#25015,#24951,#30567,.T.); +#30567 = LINE('',#30568,#30569); +#30568 = CARTESIAN_POINT('',(-0.1,-40.49,-3.1)); +#30569 = VECTOR('',#30570,1.); +#30570 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30571 = ORIENTED_EDGE('',*,*,#24958,.T.); +#30572 = ORIENTED_EDGE('',*,*,#30549,.F.); +#30573 = ORIENTED_EDGE('',*,*,#25022,.T.); +#30574 = PLANE('',#30575); +#30575 = AXIS2_PLACEMENT_3D('',#30576,#30577,#30578); +#30576 = CARTESIAN_POINT('',(-0.1,-40.49,-3.1)); +#30577 = DIRECTION('',(0.,-0.,-1.)); +#30578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30579 = ADVANCED_FACE('',(#30580),#30591,.T.); +#30580 = FACE_BOUND('',#30581,.T.); +#30581 = EDGE_LOOP('',(#30582,#30588,#30589,#30590)); +#30582 = ORIENTED_EDGE('',*,*,#30583,.T.); +#30583 = EDGE_CURVE('',#25007,#24943,#30584,.T.); +#30584 = LINE('',#30585,#30586); +#30585 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#30586 = VECTOR('',#30587,1.); +#30587 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30588 = ORIENTED_EDGE('',*,*,#24950,.T.); +#30589 = ORIENTED_EDGE('',*,*,#30566,.F.); +#30590 = ORIENTED_EDGE('',*,*,#25014,.F.); +#30591 = PLANE('',#30592); +#30592 = AXIS2_PLACEMENT_3D('',#30593,#30594,#30595); +#30593 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#30594 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30595 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30596 = ADVANCED_FACE('',(#30597),#30603,.T.); +#30597 = FACE_BOUND('',#30598,.T.); +#30598 = EDGE_LOOP('',(#30599,#30600,#30601,#30602)); +#30599 = ORIENTED_EDGE('',*,*,#24980,.T.); +#30600 = ORIENTED_EDGE('',*,*,#24942,.T.); +#30601 = ORIENTED_EDGE('',*,*,#30583,.F.); +#30602 = ORIENTED_EDGE('',*,*,#25006,.F.); +#30603 = PLANE('',#30604); +#30604 = AXIS2_PLACEMENT_3D('',#30605,#30606,#30607); +#30605 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#30606 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30607 = DIRECTION('',(0.,0.,-1.)); +#30608 = ADVANCED_FACE('',(#30609),#30620,.T.); +#30609 = FACE_BOUND('',#30610,.T.); +#30610 = EDGE_LOOP('',(#30611,#30617,#30618,#30619)); +#30611 = ORIENTED_EDGE('',*,*,#30612,.T.); +#30612 = EDGE_CURVE('',#25126,#25062,#30613,.T.); +#30613 = LINE('',#30614,#30615); +#30614 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#30615 = VECTOR('',#30616,1.); +#30616 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30617 = ORIENTED_EDGE('',*,*,#25061,.T.); +#30618 = ORIENTED_EDGE('',*,*,#25046,.F.); +#30619 = ORIENTED_EDGE('',*,*,#25125,.F.); +#30620 = PLANE('',#30621); +#30621 = AXIS2_PLACEMENT_3D('',#30622,#30623,#30624); +#30622 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#30623 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30624 = DIRECTION('',(0.,0.,1.)); +#30625 = ADVANCED_FACE('',(#30626),#30637,.T.); +#30626 = FACE_BOUND('',#30627,.T.); +#30627 = EDGE_LOOP('',(#30628,#30634,#30635,#30636)); +#30628 = ORIENTED_EDGE('',*,*,#30629,.T.); +#30629 = EDGE_CURVE('',#25151,#25087,#30630,.T.); +#30630 = LINE('',#30631,#30632); +#30631 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#30632 = VECTOR('',#30633,1.); +#30633 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30634 = ORIENTED_EDGE('',*,*,#25094,.T.); +#30635 = ORIENTED_EDGE('',*,*,#30612,.F.); +#30636 = ORIENTED_EDGE('',*,*,#25158,.F.); +#30637 = PLANE('',#30638); +#30638 = AXIS2_PLACEMENT_3D('',#30639,#30640,#30641); +#30639 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#30640 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30641 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30642 = ADVANCED_FACE('',(#30643),#30654,.T.); +#30643 = FACE_BOUND('',#30644,.T.); +#30644 = EDGE_LOOP('',(#30645,#30651,#30652,#30653)); +#30645 = ORIENTED_EDGE('',*,*,#30646,.T.); +#30646 = EDGE_CURVE('',#25143,#25079,#30647,.T.); +#30647 = LINE('',#30648,#30649); +#30648 = CARTESIAN_POINT('',(-0.1,-37.95,-3.1)); +#30649 = VECTOR('',#30650,1.); +#30650 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30651 = ORIENTED_EDGE('',*,*,#25086,.T.); +#30652 = ORIENTED_EDGE('',*,*,#30629,.F.); +#30653 = ORIENTED_EDGE('',*,*,#25150,.T.); +#30654 = PLANE('',#30655); +#30655 = AXIS2_PLACEMENT_3D('',#30656,#30657,#30658); +#30656 = CARTESIAN_POINT('',(-0.1,-37.95,-3.1)); +#30657 = DIRECTION('',(0.,-0.,-1.)); +#30658 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30659 = ADVANCED_FACE('',(#30660),#30671,.T.); +#30660 = FACE_BOUND('',#30661,.T.); +#30661 = EDGE_LOOP('',(#30662,#30668,#30669,#30670)); +#30662 = ORIENTED_EDGE('',*,*,#30663,.T.); +#30663 = EDGE_CURVE('',#25135,#25071,#30664,.T.); +#30664 = LINE('',#30665,#30666); +#30665 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#30666 = VECTOR('',#30667,1.); +#30667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30668 = ORIENTED_EDGE('',*,*,#25078,.T.); +#30669 = ORIENTED_EDGE('',*,*,#30646,.F.); +#30670 = ORIENTED_EDGE('',*,*,#25142,.F.); +#30671 = PLANE('',#30672); +#30672 = AXIS2_PLACEMENT_3D('',#30673,#30674,#30675); +#30673 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#30674 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30675 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30676 = ADVANCED_FACE('',(#30677),#30683,.T.); +#30677 = FACE_BOUND('',#30678,.T.); +#30678 = EDGE_LOOP('',(#30679,#30680,#30681,#30682)); +#30679 = ORIENTED_EDGE('',*,*,#25108,.T.); +#30680 = ORIENTED_EDGE('',*,*,#25070,.T.); +#30681 = ORIENTED_EDGE('',*,*,#30663,.F.); +#30682 = ORIENTED_EDGE('',*,*,#25134,.F.); +#30683 = PLANE('',#30684); +#30684 = AXIS2_PLACEMENT_3D('',#30685,#30686,#30687); +#30685 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#30686 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30687 = DIRECTION('',(0.,0.,-1.)); +#30688 = ADVANCED_FACE('',(#30689),#30700,.T.); +#30689 = FACE_BOUND('',#30690,.T.); +#30690 = EDGE_LOOP('',(#30691,#30697,#30698,#30699)); +#30691 = ORIENTED_EDGE('',*,*,#30692,.T.); +#30692 = EDGE_CURVE('',#25254,#25190,#30693,.T.); +#30693 = LINE('',#30694,#30695); +#30694 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#30695 = VECTOR('',#30696,1.); +#30696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30697 = ORIENTED_EDGE('',*,*,#25189,.T.); +#30698 = ORIENTED_EDGE('',*,*,#25174,.F.); +#30699 = ORIENTED_EDGE('',*,*,#25253,.F.); +#30700 = PLANE('',#30701); +#30701 = AXIS2_PLACEMENT_3D('',#30702,#30703,#30704); +#30702 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#30703 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30704 = DIRECTION('',(0.,0.,1.)); +#30705 = ADVANCED_FACE('',(#30706),#30717,.T.); +#30706 = FACE_BOUND('',#30707,.T.); +#30707 = EDGE_LOOP('',(#30708,#30714,#30715,#30716)); +#30708 = ORIENTED_EDGE('',*,*,#30709,.T.); +#30709 = EDGE_CURVE('',#25279,#25215,#30710,.T.); +#30710 = LINE('',#30711,#30712); +#30711 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#30712 = VECTOR('',#30713,1.); +#30713 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30714 = ORIENTED_EDGE('',*,*,#25222,.T.); +#30715 = ORIENTED_EDGE('',*,*,#30692,.F.); +#30716 = ORIENTED_EDGE('',*,*,#25286,.F.); +#30717 = PLANE('',#30718); +#30718 = AXIS2_PLACEMENT_3D('',#30719,#30720,#30721); +#30719 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#30720 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30721 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30722 = ADVANCED_FACE('',(#30723),#30734,.T.); +#30723 = FACE_BOUND('',#30724,.T.); +#30724 = EDGE_LOOP('',(#30725,#30731,#30732,#30733)); +#30725 = ORIENTED_EDGE('',*,*,#30726,.T.); +#30726 = EDGE_CURVE('',#25271,#25207,#30727,.T.); +#30727 = LINE('',#30728,#30729); +#30728 = CARTESIAN_POINT('',(-0.1,-35.41,-3.1)); +#30729 = VECTOR('',#30730,1.); +#30730 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30731 = ORIENTED_EDGE('',*,*,#25214,.T.); +#30732 = ORIENTED_EDGE('',*,*,#30709,.F.); +#30733 = ORIENTED_EDGE('',*,*,#25278,.T.); +#30734 = PLANE('',#30735); +#30735 = AXIS2_PLACEMENT_3D('',#30736,#30737,#30738); +#30736 = CARTESIAN_POINT('',(-0.1,-35.41,-3.1)); +#30737 = DIRECTION('',(0.,-0.,-1.)); +#30738 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30739 = ADVANCED_FACE('',(#30740),#30751,.T.); +#30740 = FACE_BOUND('',#30741,.T.); +#30741 = EDGE_LOOP('',(#30742,#30748,#30749,#30750)); +#30742 = ORIENTED_EDGE('',*,*,#30743,.T.); +#30743 = EDGE_CURVE('',#25263,#25199,#30744,.T.); +#30744 = LINE('',#30745,#30746); +#30745 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#30746 = VECTOR('',#30747,1.); +#30747 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30748 = ORIENTED_EDGE('',*,*,#25206,.T.); +#30749 = ORIENTED_EDGE('',*,*,#30726,.F.); +#30750 = ORIENTED_EDGE('',*,*,#25270,.F.); +#30751 = PLANE('',#30752); +#30752 = AXIS2_PLACEMENT_3D('',#30753,#30754,#30755); +#30753 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#30754 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30755 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30756 = ADVANCED_FACE('',(#30757),#30763,.T.); +#30757 = FACE_BOUND('',#30758,.T.); +#30758 = EDGE_LOOP('',(#30759,#30760,#30761,#30762)); +#30759 = ORIENTED_EDGE('',*,*,#25236,.T.); +#30760 = ORIENTED_EDGE('',*,*,#25198,.T.); +#30761 = ORIENTED_EDGE('',*,*,#30743,.F.); +#30762 = ORIENTED_EDGE('',*,*,#25262,.F.); +#30763 = PLANE('',#30764); +#30764 = AXIS2_PLACEMENT_3D('',#30765,#30766,#30767); +#30765 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#30766 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30767 = DIRECTION('',(0.,0.,-1.)); +#30768 = ADVANCED_FACE('',(#30769),#30780,.T.); +#30769 = FACE_BOUND('',#30770,.T.); +#30770 = EDGE_LOOP('',(#30771,#30777,#30778,#30779)); +#30771 = ORIENTED_EDGE('',*,*,#30772,.T.); +#30772 = EDGE_CURVE('',#25382,#25318,#30773,.T.); +#30773 = LINE('',#30774,#30775); +#30774 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#30775 = VECTOR('',#30776,1.); +#30776 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30777 = ORIENTED_EDGE('',*,*,#25317,.T.); +#30778 = ORIENTED_EDGE('',*,*,#25302,.F.); +#30779 = ORIENTED_EDGE('',*,*,#25381,.F.); +#30780 = PLANE('',#30781); +#30781 = AXIS2_PLACEMENT_3D('',#30782,#30783,#30784); +#30782 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#30783 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30784 = DIRECTION('',(0.,0.,1.)); +#30785 = ADVANCED_FACE('',(#30786),#30797,.T.); +#30786 = FACE_BOUND('',#30787,.T.); +#30787 = EDGE_LOOP('',(#30788,#30794,#30795,#30796)); +#30788 = ORIENTED_EDGE('',*,*,#30789,.T.); +#30789 = EDGE_CURVE('',#25407,#25343,#30790,.T.); +#30790 = LINE('',#30791,#30792); +#30791 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#30792 = VECTOR('',#30793,1.); +#30793 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30794 = ORIENTED_EDGE('',*,*,#25350,.T.); +#30795 = ORIENTED_EDGE('',*,*,#30772,.F.); +#30796 = ORIENTED_EDGE('',*,*,#25414,.F.); +#30797 = PLANE('',#30798); +#30798 = AXIS2_PLACEMENT_3D('',#30799,#30800,#30801); +#30799 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#30800 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30801 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30802 = ADVANCED_FACE('',(#30803),#30814,.T.); +#30803 = FACE_BOUND('',#30804,.T.); +#30804 = EDGE_LOOP('',(#30805,#30811,#30812,#30813)); +#30805 = ORIENTED_EDGE('',*,*,#30806,.T.); +#30806 = EDGE_CURVE('',#25399,#25335,#30807,.T.); +#30807 = LINE('',#30808,#30809); +#30808 = CARTESIAN_POINT('',(-0.1,-32.87,-3.1)); +#30809 = VECTOR('',#30810,1.); +#30810 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30811 = ORIENTED_EDGE('',*,*,#25342,.T.); +#30812 = ORIENTED_EDGE('',*,*,#30789,.F.); +#30813 = ORIENTED_EDGE('',*,*,#25406,.T.); +#30814 = PLANE('',#30815); +#30815 = AXIS2_PLACEMENT_3D('',#30816,#30817,#30818); +#30816 = CARTESIAN_POINT('',(-0.1,-32.87,-3.1)); +#30817 = DIRECTION('',(0.,-0.,-1.)); +#30818 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30819 = ADVANCED_FACE('',(#30820),#30831,.T.); +#30820 = FACE_BOUND('',#30821,.T.); +#30821 = EDGE_LOOP('',(#30822,#30828,#30829,#30830)); +#30822 = ORIENTED_EDGE('',*,*,#30823,.T.); +#30823 = EDGE_CURVE('',#25391,#25327,#30824,.T.); +#30824 = LINE('',#30825,#30826); +#30825 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#30826 = VECTOR('',#30827,1.); +#30827 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30828 = ORIENTED_EDGE('',*,*,#25334,.T.); +#30829 = ORIENTED_EDGE('',*,*,#30806,.F.); +#30830 = ORIENTED_EDGE('',*,*,#25398,.F.); +#30831 = PLANE('',#30832); +#30832 = AXIS2_PLACEMENT_3D('',#30833,#30834,#30835); +#30833 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#30834 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30835 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30836 = ADVANCED_FACE('',(#30837),#30843,.T.); +#30837 = FACE_BOUND('',#30838,.T.); +#30838 = EDGE_LOOP('',(#30839,#30840,#30841,#30842)); +#30839 = ORIENTED_EDGE('',*,*,#25364,.T.); +#30840 = ORIENTED_EDGE('',*,*,#25326,.T.); +#30841 = ORIENTED_EDGE('',*,*,#30823,.F.); +#30842 = ORIENTED_EDGE('',*,*,#25390,.F.); +#30843 = PLANE('',#30844); +#30844 = AXIS2_PLACEMENT_3D('',#30845,#30846,#30847); +#30845 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#30846 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30847 = DIRECTION('',(0.,0.,-1.)); +#30848 = ADVANCED_FACE('',(#30849),#30860,.T.); +#30849 = FACE_BOUND('',#30850,.T.); +#30850 = EDGE_LOOP('',(#30851,#30857,#30858,#30859)); +#30851 = ORIENTED_EDGE('',*,*,#30852,.T.); +#30852 = EDGE_CURVE('',#25510,#25446,#30853,.T.); +#30853 = LINE('',#30854,#30855); +#30854 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#30855 = VECTOR('',#30856,1.); +#30856 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30857 = ORIENTED_EDGE('',*,*,#25445,.T.); +#30858 = ORIENTED_EDGE('',*,*,#25430,.F.); +#30859 = ORIENTED_EDGE('',*,*,#25509,.F.); +#30860 = PLANE('',#30861); +#30861 = AXIS2_PLACEMENT_3D('',#30862,#30863,#30864); +#30862 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#30863 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30864 = DIRECTION('',(0.,0.,1.)); +#30865 = ADVANCED_FACE('',(#30866),#30877,.T.); +#30866 = FACE_BOUND('',#30867,.T.); +#30867 = EDGE_LOOP('',(#30868,#30874,#30875,#30876)); +#30868 = ORIENTED_EDGE('',*,*,#30869,.T.); +#30869 = EDGE_CURVE('',#25535,#25471,#30870,.T.); +#30870 = LINE('',#30871,#30872); +#30871 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#30872 = VECTOR('',#30873,1.); +#30873 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30874 = ORIENTED_EDGE('',*,*,#25478,.T.); +#30875 = ORIENTED_EDGE('',*,*,#30852,.F.); +#30876 = ORIENTED_EDGE('',*,*,#25542,.F.); +#30877 = PLANE('',#30878); +#30878 = AXIS2_PLACEMENT_3D('',#30879,#30880,#30881); +#30879 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#30880 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30881 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30882 = ADVANCED_FACE('',(#30883),#30894,.T.); +#30883 = FACE_BOUND('',#30884,.T.); +#30884 = EDGE_LOOP('',(#30885,#30891,#30892,#30893)); +#30885 = ORIENTED_EDGE('',*,*,#30886,.T.); +#30886 = EDGE_CURVE('',#25527,#25463,#30887,.T.); +#30887 = LINE('',#30888,#30889); +#30888 = CARTESIAN_POINT('',(-0.1,-30.33,-3.1)); +#30889 = VECTOR('',#30890,1.); +#30890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30891 = ORIENTED_EDGE('',*,*,#25470,.T.); +#30892 = ORIENTED_EDGE('',*,*,#30869,.F.); +#30893 = ORIENTED_EDGE('',*,*,#25534,.T.); +#30894 = PLANE('',#30895); +#30895 = AXIS2_PLACEMENT_3D('',#30896,#30897,#30898); +#30896 = CARTESIAN_POINT('',(-0.1,-30.33,-3.1)); +#30897 = DIRECTION('',(0.,-0.,-1.)); +#30898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30899 = ADVANCED_FACE('',(#30900),#30911,.T.); +#30900 = FACE_BOUND('',#30901,.T.); +#30901 = EDGE_LOOP('',(#30902,#30908,#30909,#30910)); +#30902 = ORIENTED_EDGE('',*,*,#30903,.T.); +#30903 = EDGE_CURVE('',#25519,#25455,#30904,.T.); +#30904 = LINE('',#30905,#30906); +#30905 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#30906 = VECTOR('',#30907,1.); +#30907 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30908 = ORIENTED_EDGE('',*,*,#25462,.T.); +#30909 = ORIENTED_EDGE('',*,*,#30886,.F.); +#30910 = ORIENTED_EDGE('',*,*,#25526,.F.); +#30911 = PLANE('',#30912); +#30912 = AXIS2_PLACEMENT_3D('',#30913,#30914,#30915); +#30913 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#30914 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30915 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30916 = ADVANCED_FACE('',(#30917),#30923,.T.); +#30917 = FACE_BOUND('',#30918,.T.); +#30918 = EDGE_LOOP('',(#30919,#30920,#30921,#30922)); +#30919 = ORIENTED_EDGE('',*,*,#25492,.T.); +#30920 = ORIENTED_EDGE('',*,*,#25454,.T.); +#30921 = ORIENTED_EDGE('',*,*,#30903,.F.); +#30922 = ORIENTED_EDGE('',*,*,#25518,.F.); +#30923 = PLANE('',#30924); +#30924 = AXIS2_PLACEMENT_3D('',#30925,#30926,#30927); +#30925 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#30926 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30927 = DIRECTION('',(0.,0.,-1.)); +#30928 = ADVANCED_FACE('',(#30929),#30940,.T.); +#30929 = FACE_BOUND('',#30930,.T.); +#30930 = EDGE_LOOP('',(#30931,#30937,#30938,#30939)); +#30931 = ORIENTED_EDGE('',*,*,#30932,.T.); +#30932 = EDGE_CURVE('',#25638,#25574,#30933,.T.); +#30933 = LINE('',#30934,#30935); +#30934 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#30935 = VECTOR('',#30936,1.); +#30936 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30937 = ORIENTED_EDGE('',*,*,#25573,.T.); +#30938 = ORIENTED_EDGE('',*,*,#25558,.F.); +#30939 = ORIENTED_EDGE('',*,*,#25637,.F.); +#30940 = PLANE('',#30941); +#30941 = AXIS2_PLACEMENT_3D('',#30942,#30943,#30944); +#30942 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#30943 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30944 = DIRECTION('',(0.,0.,1.)); +#30945 = ADVANCED_FACE('',(#30946),#30957,.T.); +#30946 = FACE_BOUND('',#30947,.T.); +#30947 = EDGE_LOOP('',(#30948,#30954,#30955,#30956)); +#30948 = ORIENTED_EDGE('',*,*,#30949,.T.); +#30949 = EDGE_CURVE('',#25663,#25599,#30950,.T.); +#30950 = LINE('',#30951,#30952); +#30951 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#30952 = VECTOR('',#30953,1.); +#30953 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30954 = ORIENTED_EDGE('',*,*,#25606,.T.); +#30955 = ORIENTED_EDGE('',*,*,#30932,.F.); +#30956 = ORIENTED_EDGE('',*,*,#25670,.F.); +#30957 = PLANE('',#30958); +#30958 = AXIS2_PLACEMENT_3D('',#30959,#30960,#30961); +#30959 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#30960 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30961 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30962 = ADVANCED_FACE('',(#30963),#30974,.T.); +#30963 = FACE_BOUND('',#30964,.T.); +#30964 = EDGE_LOOP('',(#30965,#30971,#30972,#30973)); +#30965 = ORIENTED_EDGE('',*,*,#30966,.T.); +#30966 = EDGE_CURVE('',#25655,#25591,#30967,.T.); +#30967 = LINE('',#30968,#30969); +#30968 = CARTESIAN_POINT('',(-0.1,-27.79,-3.1)); +#30969 = VECTOR('',#30970,1.); +#30970 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30971 = ORIENTED_EDGE('',*,*,#25598,.T.); +#30972 = ORIENTED_EDGE('',*,*,#30949,.F.); +#30973 = ORIENTED_EDGE('',*,*,#25662,.T.); +#30974 = PLANE('',#30975); +#30975 = AXIS2_PLACEMENT_3D('',#30976,#30977,#30978); +#30976 = CARTESIAN_POINT('',(-0.1,-27.79,-3.1)); +#30977 = DIRECTION('',(0.,-0.,-1.)); +#30978 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30979 = ADVANCED_FACE('',(#30980),#30991,.T.); +#30980 = FACE_BOUND('',#30981,.T.); +#30981 = EDGE_LOOP('',(#30982,#30988,#30989,#30990)); +#30982 = ORIENTED_EDGE('',*,*,#30983,.T.); +#30983 = EDGE_CURVE('',#25647,#25583,#30984,.T.); +#30984 = LINE('',#30985,#30986); +#30985 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#30986 = VECTOR('',#30987,1.); +#30987 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30988 = ORIENTED_EDGE('',*,*,#25590,.T.); +#30989 = ORIENTED_EDGE('',*,*,#30966,.F.); +#30990 = ORIENTED_EDGE('',*,*,#25654,.F.); +#30991 = PLANE('',#30992); +#30992 = AXIS2_PLACEMENT_3D('',#30993,#30994,#30995); +#30993 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#30994 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30995 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30996 = ADVANCED_FACE('',(#30997),#31003,.T.); +#30997 = FACE_BOUND('',#30998,.T.); +#30998 = EDGE_LOOP('',(#30999,#31000,#31001,#31002)); +#30999 = ORIENTED_EDGE('',*,*,#25620,.T.); +#31000 = ORIENTED_EDGE('',*,*,#25582,.T.); +#31001 = ORIENTED_EDGE('',*,*,#30983,.F.); +#31002 = ORIENTED_EDGE('',*,*,#25646,.F.); +#31003 = PLANE('',#31004); +#31004 = AXIS2_PLACEMENT_3D('',#31005,#31006,#31007); +#31005 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#31006 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31007 = DIRECTION('',(0.,0.,-1.)); +#31008 = ADVANCED_FACE('',(#31009),#31020,.T.); +#31009 = FACE_BOUND('',#31010,.T.); +#31010 = EDGE_LOOP('',(#31011,#31017,#31018,#31019)); +#31011 = ORIENTED_EDGE('',*,*,#31012,.T.); +#31012 = EDGE_CURVE('',#25766,#25702,#31013,.T.); +#31013 = LINE('',#31014,#31015); +#31014 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#31015 = VECTOR('',#31016,1.); +#31016 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31017 = ORIENTED_EDGE('',*,*,#25701,.T.); +#31018 = ORIENTED_EDGE('',*,*,#25686,.F.); +#31019 = ORIENTED_EDGE('',*,*,#25765,.F.); +#31020 = PLANE('',#31021); +#31021 = AXIS2_PLACEMENT_3D('',#31022,#31023,#31024); +#31022 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#31023 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31024 = DIRECTION('',(0.,0.,1.)); +#31025 = ADVANCED_FACE('',(#31026),#31037,.T.); +#31026 = FACE_BOUND('',#31027,.T.); +#31027 = EDGE_LOOP('',(#31028,#31034,#31035,#31036)); +#31028 = ORIENTED_EDGE('',*,*,#31029,.T.); +#31029 = EDGE_CURVE('',#25791,#25727,#31030,.T.); +#31030 = LINE('',#31031,#31032); +#31031 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#31032 = VECTOR('',#31033,1.); +#31033 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31034 = ORIENTED_EDGE('',*,*,#25734,.T.); +#31035 = ORIENTED_EDGE('',*,*,#31012,.F.); +#31036 = ORIENTED_EDGE('',*,*,#25798,.F.); +#31037 = PLANE('',#31038); +#31038 = AXIS2_PLACEMENT_3D('',#31039,#31040,#31041); +#31039 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#31040 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31041 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31042 = ADVANCED_FACE('',(#31043),#31054,.T.); +#31043 = FACE_BOUND('',#31044,.T.); +#31044 = EDGE_LOOP('',(#31045,#31051,#31052,#31053)); +#31045 = ORIENTED_EDGE('',*,*,#31046,.T.); +#31046 = EDGE_CURVE('',#25783,#25719,#31047,.T.); +#31047 = LINE('',#31048,#31049); +#31048 = CARTESIAN_POINT('',(-0.1,-25.25,-3.1)); +#31049 = VECTOR('',#31050,1.); +#31050 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31051 = ORIENTED_EDGE('',*,*,#25726,.T.); +#31052 = ORIENTED_EDGE('',*,*,#31029,.F.); +#31053 = ORIENTED_EDGE('',*,*,#25790,.T.); +#31054 = PLANE('',#31055); +#31055 = AXIS2_PLACEMENT_3D('',#31056,#31057,#31058); +#31056 = CARTESIAN_POINT('',(-0.1,-25.25,-3.1)); +#31057 = DIRECTION('',(0.,-0.,-1.)); +#31058 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31059 = ADVANCED_FACE('',(#31060),#31071,.T.); +#31060 = FACE_BOUND('',#31061,.T.); +#31061 = EDGE_LOOP('',(#31062,#31068,#31069,#31070)); +#31062 = ORIENTED_EDGE('',*,*,#31063,.T.); +#31063 = EDGE_CURVE('',#25775,#25711,#31064,.T.); +#31064 = LINE('',#31065,#31066); +#31065 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#31066 = VECTOR('',#31067,1.); +#31067 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31068 = ORIENTED_EDGE('',*,*,#25718,.T.); +#31069 = ORIENTED_EDGE('',*,*,#31046,.F.); +#31070 = ORIENTED_EDGE('',*,*,#25782,.F.); +#31071 = PLANE('',#31072); +#31072 = AXIS2_PLACEMENT_3D('',#31073,#31074,#31075); +#31073 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#31074 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31075 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31076 = ADVANCED_FACE('',(#31077),#31083,.T.); +#31077 = FACE_BOUND('',#31078,.T.); +#31078 = EDGE_LOOP('',(#31079,#31080,#31081,#31082)); +#31079 = ORIENTED_EDGE('',*,*,#25748,.T.); +#31080 = ORIENTED_EDGE('',*,*,#25710,.T.); +#31081 = ORIENTED_EDGE('',*,*,#31063,.F.); +#31082 = ORIENTED_EDGE('',*,*,#25774,.F.); +#31083 = PLANE('',#31084); +#31084 = AXIS2_PLACEMENT_3D('',#31085,#31086,#31087); +#31085 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#31086 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31087 = DIRECTION('',(0.,0.,-1.)); +#31088 = ADVANCED_FACE('',(#31089),#31100,.T.); +#31089 = FACE_BOUND('',#31090,.T.); +#31090 = EDGE_LOOP('',(#31091,#31097,#31098,#31099)); +#31091 = ORIENTED_EDGE('',*,*,#31092,.T.); +#31092 = EDGE_CURVE('',#25894,#25830,#31093,.T.); +#31093 = LINE('',#31094,#31095); +#31094 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#31095 = VECTOR('',#31096,1.); +#31096 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31097 = ORIENTED_EDGE('',*,*,#25829,.T.); +#31098 = ORIENTED_EDGE('',*,*,#25814,.F.); +#31099 = ORIENTED_EDGE('',*,*,#25893,.F.); +#31100 = PLANE('',#31101); +#31101 = AXIS2_PLACEMENT_3D('',#31102,#31103,#31104); +#31102 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#31103 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31104 = DIRECTION('',(0.,0.,1.)); +#31105 = ADVANCED_FACE('',(#31106),#31117,.T.); +#31106 = FACE_BOUND('',#31107,.T.); +#31107 = EDGE_LOOP('',(#31108,#31114,#31115,#31116)); +#31108 = ORIENTED_EDGE('',*,*,#31109,.T.); +#31109 = EDGE_CURVE('',#25919,#25855,#31110,.T.); +#31110 = LINE('',#31111,#31112); +#31111 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#31112 = VECTOR('',#31113,1.); +#31113 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31114 = ORIENTED_EDGE('',*,*,#25862,.T.); +#31115 = ORIENTED_EDGE('',*,*,#31092,.F.); +#31116 = ORIENTED_EDGE('',*,*,#25926,.F.); +#31117 = PLANE('',#31118); +#31118 = AXIS2_PLACEMENT_3D('',#31119,#31120,#31121); +#31119 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#31120 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31121 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31122 = ADVANCED_FACE('',(#31123),#31134,.T.); +#31123 = FACE_BOUND('',#31124,.T.); +#31124 = EDGE_LOOP('',(#31125,#31131,#31132,#31133)); +#31125 = ORIENTED_EDGE('',*,*,#31126,.T.); +#31126 = EDGE_CURVE('',#25911,#25847,#31127,.T.); +#31127 = LINE('',#31128,#31129); +#31128 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#31129 = VECTOR('',#31130,1.); +#31130 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31131 = ORIENTED_EDGE('',*,*,#25854,.T.); +#31132 = ORIENTED_EDGE('',*,*,#31109,.F.); +#31133 = ORIENTED_EDGE('',*,*,#25918,.T.); +#31134 = PLANE('',#31135); +#31135 = AXIS2_PLACEMENT_3D('',#31136,#31137,#31138); +#31136 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#31137 = DIRECTION('',(0.,-0.,-1.)); +#31138 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31139 = ADVANCED_FACE('',(#31140),#31151,.T.); +#31140 = FACE_BOUND('',#31141,.T.); +#31141 = EDGE_LOOP('',(#31142,#31148,#31149,#31150)); +#31142 = ORIENTED_EDGE('',*,*,#31143,.T.); +#31143 = EDGE_CURVE('',#25903,#25839,#31144,.T.); +#31144 = LINE('',#31145,#31146); +#31145 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#31146 = VECTOR('',#31147,1.); +#31147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31148 = ORIENTED_EDGE('',*,*,#25846,.T.); +#31149 = ORIENTED_EDGE('',*,*,#31126,.F.); +#31150 = ORIENTED_EDGE('',*,*,#25910,.F.); +#31151 = PLANE('',#31152); +#31152 = AXIS2_PLACEMENT_3D('',#31153,#31154,#31155); +#31153 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#31154 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31155 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31156 = ADVANCED_FACE('',(#31157),#31163,.T.); +#31157 = FACE_BOUND('',#31158,.T.); +#31158 = EDGE_LOOP('',(#31159,#31160,#31161,#31162)); +#31159 = ORIENTED_EDGE('',*,*,#25876,.T.); +#31160 = ORIENTED_EDGE('',*,*,#25838,.T.); +#31161 = ORIENTED_EDGE('',*,*,#31143,.F.); +#31162 = ORIENTED_EDGE('',*,*,#25902,.F.); +#31163 = PLANE('',#31164); +#31164 = AXIS2_PLACEMENT_3D('',#31165,#31166,#31167); +#31165 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#31166 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31167 = DIRECTION('',(0.,0.,-1.)); +#31168 = ADVANCED_FACE('',(#31169),#31180,.T.); +#31169 = FACE_BOUND('',#31170,.T.); +#31170 = EDGE_LOOP('',(#31171,#31177,#31178,#31179)); +#31171 = ORIENTED_EDGE('',*,*,#31172,.T.); +#31172 = EDGE_CURVE('',#26022,#25958,#31173,.T.); +#31173 = LINE('',#31174,#31175); +#31174 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#31175 = VECTOR('',#31176,1.); +#31176 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31177 = ORIENTED_EDGE('',*,*,#25957,.T.); +#31178 = ORIENTED_EDGE('',*,*,#25942,.F.); +#31179 = ORIENTED_EDGE('',*,*,#26021,.F.); +#31180 = PLANE('',#31181); +#31181 = AXIS2_PLACEMENT_3D('',#31182,#31183,#31184); +#31182 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#31183 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31184 = DIRECTION('',(0.,0.,1.)); +#31185 = ADVANCED_FACE('',(#31186),#31197,.T.); +#31186 = FACE_BOUND('',#31187,.T.); +#31187 = EDGE_LOOP('',(#31188,#31194,#31195,#31196)); +#31188 = ORIENTED_EDGE('',*,*,#31189,.T.); +#31189 = EDGE_CURVE('',#26047,#25983,#31190,.T.); +#31190 = LINE('',#31191,#31192); +#31191 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#31192 = VECTOR('',#31193,1.); +#31193 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31194 = ORIENTED_EDGE('',*,*,#25990,.T.); +#31195 = ORIENTED_EDGE('',*,*,#31172,.F.); +#31196 = ORIENTED_EDGE('',*,*,#26054,.F.); +#31197 = PLANE('',#31198); +#31198 = AXIS2_PLACEMENT_3D('',#31199,#31200,#31201); +#31199 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#31200 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31201 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31202 = ADVANCED_FACE('',(#31203),#31214,.T.); +#31203 = FACE_BOUND('',#31204,.T.); +#31204 = EDGE_LOOP('',(#31205,#31211,#31212,#31213)); +#31205 = ORIENTED_EDGE('',*,*,#31206,.T.); +#31206 = EDGE_CURVE('',#26039,#25975,#31207,.T.); +#31207 = LINE('',#31208,#31209); +#31208 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#31209 = VECTOR('',#31210,1.); +#31210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31211 = ORIENTED_EDGE('',*,*,#25982,.T.); +#31212 = ORIENTED_EDGE('',*,*,#31189,.F.); +#31213 = ORIENTED_EDGE('',*,*,#26046,.T.); +#31214 = PLANE('',#31215); +#31215 = AXIS2_PLACEMENT_3D('',#31216,#31217,#31218); +#31216 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#31217 = DIRECTION('',(0.,-0.,-1.)); +#31218 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31219 = ADVANCED_FACE('',(#31220),#31231,.T.); +#31220 = FACE_BOUND('',#31221,.T.); +#31221 = EDGE_LOOP('',(#31222,#31228,#31229,#31230)); +#31222 = ORIENTED_EDGE('',*,*,#31223,.T.); +#31223 = EDGE_CURVE('',#26031,#25967,#31224,.T.); +#31224 = LINE('',#31225,#31226); +#31225 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#31226 = VECTOR('',#31227,1.); +#31227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31228 = ORIENTED_EDGE('',*,*,#25974,.T.); +#31229 = ORIENTED_EDGE('',*,*,#31206,.F.); +#31230 = ORIENTED_EDGE('',*,*,#26038,.F.); +#31231 = PLANE('',#31232); +#31232 = AXIS2_PLACEMENT_3D('',#31233,#31234,#31235); +#31233 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#31234 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31235 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31236 = ADVANCED_FACE('',(#31237),#31243,.T.); +#31237 = FACE_BOUND('',#31238,.T.); +#31238 = EDGE_LOOP('',(#31239,#31240,#31241,#31242)); +#31239 = ORIENTED_EDGE('',*,*,#26004,.T.); +#31240 = ORIENTED_EDGE('',*,*,#25966,.T.); +#31241 = ORIENTED_EDGE('',*,*,#31223,.F.); +#31242 = ORIENTED_EDGE('',*,*,#26030,.F.); +#31243 = PLANE('',#31244); +#31244 = AXIS2_PLACEMENT_3D('',#31245,#31246,#31247); +#31245 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#31246 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31247 = DIRECTION('',(0.,0.,-1.)); +#31248 = ADVANCED_FACE('',(#31249),#31260,.T.); +#31249 = FACE_BOUND('',#31250,.T.); +#31250 = EDGE_LOOP('',(#31251,#31257,#31258,#31259)); +#31251 = ORIENTED_EDGE('',*,*,#31252,.T.); +#31252 = EDGE_CURVE('',#26150,#26086,#31253,.T.); +#31253 = LINE('',#31254,#31255); +#31254 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#31255 = VECTOR('',#31256,1.); +#31256 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31257 = ORIENTED_EDGE('',*,*,#26085,.T.); +#31258 = ORIENTED_EDGE('',*,*,#26070,.F.); +#31259 = ORIENTED_EDGE('',*,*,#26149,.F.); +#31260 = PLANE('',#31261); +#31261 = AXIS2_PLACEMENT_3D('',#31262,#31263,#31264); +#31262 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#31263 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31264 = DIRECTION('',(0.,0.,1.)); +#31265 = ADVANCED_FACE('',(#31266),#31277,.T.); +#31266 = FACE_BOUND('',#31267,.T.); +#31267 = EDGE_LOOP('',(#31268,#31274,#31275,#31276)); +#31268 = ORIENTED_EDGE('',*,*,#31269,.T.); +#31269 = EDGE_CURVE('',#26175,#26111,#31270,.T.); +#31270 = LINE('',#31271,#31272); +#31271 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#31272 = VECTOR('',#31273,1.); +#31273 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31274 = ORIENTED_EDGE('',*,*,#26118,.T.); +#31275 = ORIENTED_EDGE('',*,*,#31252,.F.); +#31276 = ORIENTED_EDGE('',*,*,#26182,.F.); +#31277 = PLANE('',#31278); +#31278 = AXIS2_PLACEMENT_3D('',#31279,#31280,#31281); +#31279 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#31280 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31281 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31282 = ADVANCED_FACE('',(#31283),#31294,.T.); +#31283 = FACE_BOUND('',#31284,.T.); +#31284 = EDGE_LOOP('',(#31285,#31291,#31292,#31293)); +#31285 = ORIENTED_EDGE('',*,*,#31286,.T.); +#31286 = EDGE_CURVE('',#26167,#26103,#31287,.T.); +#31287 = LINE('',#31288,#31289); +#31288 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#31289 = VECTOR('',#31290,1.); +#31290 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31291 = ORIENTED_EDGE('',*,*,#26110,.T.); +#31292 = ORIENTED_EDGE('',*,*,#31269,.F.); +#31293 = ORIENTED_EDGE('',*,*,#26174,.T.); +#31294 = PLANE('',#31295); +#31295 = AXIS2_PLACEMENT_3D('',#31296,#31297,#31298); +#31296 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#31297 = DIRECTION('',(0.,-0.,-1.)); +#31298 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31299 = ADVANCED_FACE('',(#31300),#31311,.T.); +#31300 = FACE_BOUND('',#31301,.T.); +#31301 = EDGE_LOOP('',(#31302,#31308,#31309,#31310)); +#31302 = ORIENTED_EDGE('',*,*,#31303,.T.); +#31303 = EDGE_CURVE('',#26159,#26095,#31304,.T.); +#31304 = LINE('',#31305,#31306); +#31305 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#31306 = VECTOR('',#31307,1.); +#31307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31308 = ORIENTED_EDGE('',*,*,#26102,.T.); +#31309 = ORIENTED_EDGE('',*,*,#31286,.F.); +#31310 = ORIENTED_EDGE('',*,*,#26166,.F.); +#31311 = PLANE('',#31312); +#31312 = AXIS2_PLACEMENT_3D('',#31313,#31314,#31315); +#31313 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#31314 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31315 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31316 = ADVANCED_FACE('',(#31317),#31323,.T.); +#31317 = FACE_BOUND('',#31318,.T.); +#31318 = EDGE_LOOP('',(#31319,#31320,#31321,#31322)); +#31319 = ORIENTED_EDGE('',*,*,#26132,.T.); +#31320 = ORIENTED_EDGE('',*,*,#26094,.T.); +#31321 = ORIENTED_EDGE('',*,*,#31303,.F.); +#31322 = ORIENTED_EDGE('',*,*,#26158,.F.); +#31323 = PLANE('',#31324); +#31324 = AXIS2_PLACEMENT_3D('',#31325,#31326,#31327); +#31325 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#31326 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31327 = DIRECTION('',(0.,0.,-1.)); +#31328 = ADVANCED_FACE('',(#31329),#31340,.T.); +#31329 = FACE_BOUND('',#31330,.T.); +#31330 = EDGE_LOOP('',(#31331,#31337,#31338,#31339)); +#31331 = ORIENTED_EDGE('',*,*,#31332,.T.); +#31332 = EDGE_CURVE('',#26278,#26214,#31333,.T.); +#31333 = LINE('',#31334,#31335); +#31334 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#31335 = VECTOR('',#31336,1.); +#31336 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31337 = ORIENTED_EDGE('',*,*,#26213,.T.); +#31338 = ORIENTED_EDGE('',*,*,#26198,.F.); +#31339 = ORIENTED_EDGE('',*,*,#26277,.F.); +#31340 = PLANE('',#31341); +#31341 = AXIS2_PLACEMENT_3D('',#31342,#31343,#31344); +#31342 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#31343 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31344 = DIRECTION('',(0.,0.,1.)); +#31345 = ADVANCED_FACE('',(#31346),#31357,.T.); +#31346 = FACE_BOUND('',#31347,.T.); +#31347 = EDGE_LOOP('',(#31348,#31354,#31355,#31356)); +#31348 = ORIENTED_EDGE('',*,*,#31349,.T.); +#31349 = EDGE_CURVE('',#26303,#26239,#31350,.T.); +#31350 = LINE('',#31351,#31352); +#31351 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#31352 = VECTOR('',#31353,1.); +#31353 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31354 = ORIENTED_EDGE('',*,*,#26246,.T.); +#31355 = ORIENTED_EDGE('',*,*,#31332,.F.); +#31356 = ORIENTED_EDGE('',*,*,#26310,.F.); +#31357 = PLANE('',#31358); +#31358 = AXIS2_PLACEMENT_3D('',#31359,#31360,#31361); +#31359 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#31360 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31361 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31362 = ADVANCED_FACE('',(#31363),#31374,.T.); +#31363 = FACE_BOUND('',#31364,.T.); +#31364 = EDGE_LOOP('',(#31365,#31371,#31372,#31373)); +#31365 = ORIENTED_EDGE('',*,*,#31366,.T.); +#31366 = EDGE_CURVE('',#26295,#26231,#31367,.T.); +#31367 = LINE('',#31368,#31369); +#31368 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#31369 = VECTOR('',#31370,1.); +#31370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31371 = ORIENTED_EDGE('',*,*,#26238,.T.); +#31372 = ORIENTED_EDGE('',*,*,#31349,.F.); +#31373 = ORIENTED_EDGE('',*,*,#26302,.T.); +#31374 = PLANE('',#31375); +#31375 = AXIS2_PLACEMENT_3D('',#31376,#31377,#31378); +#31376 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#31377 = DIRECTION('',(0.,-0.,-1.)); +#31378 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31379 = ADVANCED_FACE('',(#31380),#31391,.T.); +#31380 = FACE_BOUND('',#31381,.T.); +#31381 = EDGE_LOOP('',(#31382,#31388,#31389,#31390)); +#31382 = ORIENTED_EDGE('',*,*,#31383,.T.); +#31383 = EDGE_CURVE('',#26287,#26223,#31384,.T.); +#31384 = LINE('',#31385,#31386); +#31385 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#31386 = VECTOR('',#31387,1.); +#31387 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31388 = ORIENTED_EDGE('',*,*,#26230,.T.); +#31389 = ORIENTED_EDGE('',*,*,#31366,.F.); +#31390 = ORIENTED_EDGE('',*,*,#26294,.F.); +#31391 = PLANE('',#31392); +#31392 = AXIS2_PLACEMENT_3D('',#31393,#31394,#31395); +#31393 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#31394 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31395 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31396 = ADVANCED_FACE('',(#31397),#31403,.T.); +#31397 = FACE_BOUND('',#31398,.T.); +#31398 = EDGE_LOOP('',(#31399,#31400,#31401,#31402)); +#31399 = ORIENTED_EDGE('',*,*,#26260,.T.); +#31400 = ORIENTED_EDGE('',*,*,#26222,.T.); +#31401 = ORIENTED_EDGE('',*,*,#31383,.F.); +#31402 = ORIENTED_EDGE('',*,*,#26286,.F.); +#31403 = PLANE('',#31404); +#31404 = AXIS2_PLACEMENT_3D('',#31405,#31406,#31407); +#31405 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#31406 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31407 = DIRECTION('',(0.,0.,-1.)); +#31408 = ADVANCED_FACE('',(#31409),#31420,.T.); +#31409 = FACE_BOUND('',#31410,.T.); +#31410 = EDGE_LOOP('',(#31411,#31417,#31418,#31419)); +#31411 = ORIENTED_EDGE('',*,*,#31412,.T.); +#31412 = EDGE_CURVE('',#26406,#26342,#31413,.T.); +#31413 = LINE('',#31414,#31415); +#31414 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#31415 = VECTOR('',#31416,1.); +#31416 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31417 = ORIENTED_EDGE('',*,*,#26341,.T.); +#31418 = ORIENTED_EDGE('',*,*,#26326,.F.); +#31419 = ORIENTED_EDGE('',*,*,#26405,.F.); +#31420 = PLANE('',#31421); +#31421 = AXIS2_PLACEMENT_3D('',#31422,#31423,#31424); +#31422 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#31423 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31424 = DIRECTION('',(0.,0.,1.)); +#31425 = ADVANCED_FACE('',(#31426),#31437,.T.); +#31426 = FACE_BOUND('',#31427,.T.); +#31427 = EDGE_LOOP('',(#31428,#31434,#31435,#31436)); +#31428 = ORIENTED_EDGE('',*,*,#31429,.T.); +#31429 = EDGE_CURVE('',#26431,#26367,#31430,.T.); +#31430 = LINE('',#31431,#31432); +#31431 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#31432 = VECTOR('',#31433,1.); +#31433 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31434 = ORIENTED_EDGE('',*,*,#26374,.T.); +#31435 = ORIENTED_EDGE('',*,*,#31412,.F.); +#31436 = ORIENTED_EDGE('',*,*,#26438,.F.); +#31437 = PLANE('',#31438); +#31438 = AXIS2_PLACEMENT_3D('',#31439,#31440,#31441); +#31439 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#31440 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31441 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31442 = ADVANCED_FACE('',(#31443),#31454,.T.); +#31443 = FACE_BOUND('',#31444,.T.); +#31444 = EDGE_LOOP('',(#31445,#31451,#31452,#31453)); +#31445 = ORIENTED_EDGE('',*,*,#31446,.T.); +#31446 = EDGE_CURVE('',#26423,#26359,#31447,.T.); +#31447 = LINE('',#31448,#31449); +#31448 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#31449 = VECTOR('',#31450,1.); +#31450 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31451 = ORIENTED_EDGE('',*,*,#26366,.T.); +#31452 = ORIENTED_EDGE('',*,*,#31429,.F.); +#31453 = ORIENTED_EDGE('',*,*,#26430,.T.); +#31454 = PLANE('',#31455); +#31455 = AXIS2_PLACEMENT_3D('',#31456,#31457,#31458); +#31456 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#31457 = DIRECTION('',(0.,-0.,-1.)); +#31458 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31459 = ADVANCED_FACE('',(#31460),#31471,.T.); +#31460 = FACE_BOUND('',#31461,.T.); +#31461 = EDGE_LOOP('',(#31462,#31468,#31469,#31470)); +#31462 = ORIENTED_EDGE('',*,*,#31463,.T.); +#31463 = EDGE_CURVE('',#26415,#26351,#31464,.T.); +#31464 = LINE('',#31465,#31466); +#31465 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#31466 = VECTOR('',#31467,1.); +#31467 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31468 = ORIENTED_EDGE('',*,*,#26358,.T.); +#31469 = ORIENTED_EDGE('',*,*,#31446,.F.); +#31470 = ORIENTED_EDGE('',*,*,#26422,.F.); +#31471 = PLANE('',#31472); +#31472 = AXIS2_PLACEMENT_3D('',#31473,#31474,#31475); +#31473 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#31474 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31475 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31476 = ADVANCED_FACE('',(#31477),#31483,.T.); +#31477 = FACE_BOUND('',#31478,.T.); +#31478 = EDGE_LOOP('',(#31479,#31480,#31481,#31482)); +#31479 = ORIENTED_EDGE('',*,*,#26388,.T.); +#31480 = ORIENTED_EDGE('',*,*,#26350,.T.); +#31481 = ORIENTED_EDGE('',*,*,#31463,.F.); +#31482 = ORIENTED_EDGE('',*,*,#26414,.F.); +#31483 = PLANE('',#31484); +#31484 = AXIS2_PLACEMENT_3D('',#31485,#31486,#31487); +#31485 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#31486 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31487 = DIRECTION('',(0.,0.,-1.)); +#31488 = ADVANCED_FACE('',(#31489),#31500,.T.); +#31489 = FACE_BOUND('',#31490,.T.); +#31490 = EDGE_LOOP('',(#31491,#31497,#31498,#31499)); +#31491 = ORIENTED_EDGE('',*,*,#31492,.T.); +#31492 = EDGE_CURVE('',#26534,#26470,#31493,.T.); +#31493 = LINE('',#31494,#31495); +#31494 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#31495 = VECTOR('',#31496,1.); +#31496 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31497 = ORIENTED_EDGE('',*,*,#26469,.T.); +#31498 = ORIENTED_EDGE('',*,*,#26454,.F.); +#31499 = ORIENTED_EDGE('',*,*,#26533,.F.); +#31500 = PLANE('',#31501); +#31501 = AXIS2_PLACEMENT_3D('',#31502,#31503,#31504); +#31502 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#31503 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31504 = DIRECTION('',(0.,0.,1.)); +#31505 = ADVANCED_FACE('',(#31506),#31517,.T.); +#31506 = FACE_BOUND('',#31507,.T.); +#31507 = EDGE_LOOP('',(#31508,#31514,#31515,#31516)); +#31508 = ORIENTED_EDGE('',*,*,#31509,.T.); +#31509 = EDGE_CURVE('',#26559,#26495,#31510,.T.); +#31510 = LINE('',#31511,#31512); +#31511 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#31512 = VECTOR('',#31513,1.); +#31513 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31514 = ORIENTED_EDGE('',*,*,#26502,.T.); +#31515 = ORIENTED_EDGE('',*,*,#31492,.F.); +#31516 = ORIENTED_EDGE('',*,*,#26566,.F.); +#31517 = PLANE('',#31518); +#31518 = AXIS2_PLACEMENT_3D('',#31519,#31520,#31521); +#31519 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#31520 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31521 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31522 = ADVANCED_FACE('',(#31523),#31534,.T.); +#31523 = FACE_BOUND('',#31524,.T.); +#31524 = EDGE_LOOP('',(#31525,#31531,#31532,#31533)); +#31525 = ORIENTED_EDGE('',*,*,#31526,.T.); +#31526 = EDGE_CURVE('',#26551,#26487,#31527,.T.); +#31527 = LINE('',#31528,#31529); +#31528 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#31529 = VECTOR('',#31530,1.); +#31530 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31531 = ORIENTED_EDGE('',*,*,#26494,.T.); +#31532 = ORIENTED_EDGE('',*,*,#31509,.F.); +#31533 = ORIENTED_EDGE('',*,*,#26558,.T.); +#31534 = PLANE('',#31535); +#31535 = AXIS2_PLACEMENT_3D('',#31536,#31537,#31538); +#31536 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#31537 = DIRECTION('',(0.,-0.,-1.)); +#31538 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31539 = ADVANCED_FACE('',(#31540),#31551,.T.); +#31540 = FACE_BOUND('',#31541,.T.); +#31541 = EDGE_LOOP('',(#31542,#31548,#31549,#31550)); +#31542 = ORIENTED_EDGE('',*,*,#31543,.T.); +#31543 = EDGE_CURVE('',#26543,#26479,#31544,.T.); +#31544 = LINE('',#31545,#31546); +#31545 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#31546 = VECTOR('',#31547,1.); +#31547 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31548 = ORIENTED_EDGE('',*,*,#26486,.T.); +#31549 = ORIENTED_EDGE('',*,*,#31526,.F.); +#31550 = ORIENTED_EDGE('',*,*,#26550,.F.); +#31551 = PLANE('',#31552); +#31552 = AXIS2_PLACEMENT_3D('',#31553,#31554,#31555); +#31553 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#31554 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31555 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31556 = ADVANCED_FACE('',(#31557),#31563,.T.); +#31557 = FACE_BOUND('',#31558,.T.); +#31558 = EDGE_LOOP('',(#31559,#31560,#31561,#31562)); +#31559 = ORIENTED_EDGE('',*,*,#26516,.T.); +#31560 = ORIENTED_EDGE('',*,*,#26478,.T.); +#31561 = ORIENTED_EDGE('',*,*,#31543,.F.); +#31562 = ORIENTED_EDGE('',*,*,#26542,.F.); +#31563 = PLANE('',#31564); +#31564 = AXIS2_PLACEMENT_3D('',#31565,#31566,#31567); +#31565 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#31566 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31567 = DIRECTION('',(0.,0.,-1.)); +#31568 = ADVANCED_FACE('',(#31569),#31580,.T.); +#31569 = FACE_BOUND('',#31570,.T.); +#31570 = EDGE_LOOP('',(#31571,#31577,#31578,#31579)); +#31571 = ORIENTED_EDGE('',*,*,#31572,.T.); +#31572 = EDGE_CURVE('',#26662,#26598,#31573,.T.); +#31573 = LINE('',#31574,#31575); +#31574 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#31575 = VECTOR('',#31576,1.); +#31576 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31577 = ORIENTED_EDGE('',*,*,#26597,.T.); +#31578 = ORIENTED_EDGE('',*,*,#26582,.F.); +#31579 = ORIENTED_EDGE('',*,*,#26661,.F.); +#31580 = PLANE('',#31581); +#31581 = AXIS2_PLACEMENT_3D('',#31582,#31583,#31584); +#31582 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#31583 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31584 = DIRECTION('',(0.,0.,1.)); +#31585 = ADVANCED_FACE('',(#31586),#31597,.T.); +#31586 = FACE_BOUND('',#31587,.T.); +#31587 = EDGE_LOOP('',(#31588,#31594,#31595,#31596)); +#31588 = ORIENTED_EDGE('',*,*,#31589,.T.); +#31589 = EDGE_CURVE('',#26687,#26623,#31590,.T.); +#31590 = LINE('',#31591,#31592); +#31591 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#31592 = VECTOR('',#31593,1.); +#31593 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31594 = ORIENTED_EDGE('',*,*,#26630,.T.); +#31595 = ORIENTED_EDGE('',*,*,#31572,.F.); +#31596 = ORIENTED_EDGE('',*,*,#26694,.F.); +#31597 = PLANE('',#31598); +#31598 = AXIS2_PLACEMENT_3D('',#31599,#31600,#31601); +#31599 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#31600 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31601 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31602 = ADVANCED_FACE('',(#31603),#31614,.T.); +#31603 = FACE_BOUND('',#31604,.T.); +#31604 = EDGE_LOOP('',(#31605,#31611,#31612,#31613)); +#31605 = ORIENTED_EDGE('',*,*,#31606,.T.); +#31606 = EDGE_CURVE('',#26679,#26615,#31607,.T.); +#31607 = LINE('',#31608,#31609); +#31608 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#31609 = VECTOR('',#31610,1.); +#31610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31611 = ORIENTED_EDGE('',*,*,#26622,.T.); +#31612 = ORIENTED_EDGE('',*,*,#31589,.F.); +#31613 = ORIENTED_EDGE('',*,*,#26686,.T.); +#31614 = PLANE('',#31615); +#31615 = AXIS2_PLACEMENT_3D('',#31616,#31617,#31618); +#31616 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#31617 = DIRECTION('',(0.,-0.,-1.)); +#31618 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31619 = ADVANCED_FACE('',(#31620),#31631,.T.); +#31620 = FACE_BOUND('',#31621,.T.); +#31621 = EDGE_LOOP('',(#31622,#31628,#31629,#31630)); +#31622 = ORIENTED_EDGE('',*,*,#31623,.T.); +#31623 = EDGE_CURVE('',#26671,#26607,#31624,.T.); +#31624 = LINE('',#31625,#31626); +#31625 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#31626 = VECTOR('',#31627,1.); +#31627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31628 = ORIENTED_EDGE('',*,*,#26614,.T.); +#31629 = ORIENTED_EDGE('',*,*,#31606,.F.); +#31630 = ORIENTED_EDGE('',*,*,#26678,.F.); +#31631 = PLANE('',#31632); +#31632 = AXIS2_PLACEMENT_3D('',#31633,#31634,#31635); +#31633 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#31634 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31635 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31636 = ADVANCED_FACE('',(#31637),#31643,.T.); +#31637 = FACE_BOUND('',#31638,.T.); +#31638 = EDGE_LOOP('',(#31639,#31640,#31641,#31642)); +#31639 = ORIENTED_EDGE('',*,*,#26644,.T.); +#31640 = ORIENTED_EDGE('',*,*,#26606,.T.); +#31641 = ORIENTED_EDGE('',*,*,#31623,.F.); +#31642 = ORIENTED_EDGE('',*,*,#26670,.F.); +#31643 = PLANE('',#31644); +#31644 = AXIS2_PLACEMENT_3D('',#31645,#31646,#31647); +#31645 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#31646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31647 = DIRECTION('',(0.,0.,-1.)); +#31648 = ADVANCED_FACE('',(#31649),#31660,.T.); +#31649 = FACE_BOUND('',#31650,.T.); +#31650 = EDGE_LOOP('',(#31651,#31657,#31658,#31659)); +#31651 = ORIENTED_EDGE('',*,*,#31652,.T.); +#31652 = EDGE_CURVE('',#26790,#26726,#31653,.T.); +#31653 = LINE('',#31654,#31655); +#31654 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#31655 = VECTOR('',#31656,1.); +#31656 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31657 = ORIENTED_EDGE('',*,*,#26725,.T.); +#31658 = ORIENTED_EDGE('',*,*,#26710,.F.); +#31659 = ORIENTED_EDGE('',*,*,#26789,.F.); +#31660 = PLANE('',#31661); +#31661 = AXIS2_PLACEMENT_3D('',#31662,#31663,#31664); +#31662 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#31663 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31664 = DIRECTION('',(0.,0.,1.)); +#31665 = ADVANCED_FACE('',(#31666),#31677,.T.); +#31666 = FACE_BOUND('',#31667,.T.); +#31667 = EDGE_LOOP('',(#31668,#31674,#31675,#31676)); +#31668 = ORIENTED_EDGE('',*,*,#31669,.T.); +#31669 = EDGE_CURVE('',#26815,#26751,#31670,.T.); +#31670 = LINE('',#31671,#31672); +#31671 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#31672 = VECTOR('',#31673,1.); +#31673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31674 = ORIENTED_EDGE('',*,*,#26758,.T.); +#31675 = ORIENTED_EDGE('',*,*,#31652,.F.); +#31676 = ORIENTED_EDGE('',*,*,#26822,.F.); +#31677 = PLANE('',#31678); +#31678 = AXIS2_PLACEMENT_3D('',#31679,#31680,#31681); +#31679 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#31680 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31681 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31682 = ADVANCED_FACE('',(#31683),#31694,.T.); +#31683 = FACE_BOUND('',#31684,.T.); +#31684 = EDGE_LOOP('',(#31685,#31691,#31692,#31693)); +#31685 = ORIENTED_EDGE('',*,*,#31686,.T.); +#31686 = EDGE_CURVE('',#26807,#26743,#31687,.T.); +#31687 = LINE('',#31688,#31689); +#31688 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#31689 = VECTOR('',#31690,1.); +#31690 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31691 = ORIENTED_EDGE('',*,*,#26750,.T.); +#31692 = ORIENTED_EDGE('',*,*,#31669,.F.); +#31693 = ORIENTED_EDGE('',*,*,#26814,.T.); +#31694 = PLANE('',#31695); +#31695 = AXIS2_PLACEMENT_3D('',#31696,#31697,#31698); +#31696 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#31697 = DIRECTION('',(0.,-0.,-1.)); +#31698 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31699 = ADVANCED_FACE('',(#31700),#31711,.T.); +#31700 = FACE_BOUND('',#31701,.T.); +#31701 = EDGE_LOOP('',(#31702,#31708,#31709,#31710)); +#31702 = ORIENTED_EDGE('',*,*,#31703,.T.); +#31703 = EDGE_CURVE('',#26799,#26735,#31704,.T.); +#31704 = LINE('',#31705,#31706); +#31705 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#31706 = VECTOR('',#31707,1.); +#31707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31708 = ORIENTED_EDGE('',*,*,#26742,.T.); +#31709 = ORIENTED_EDGE('',*,*,#31686,.F.); +#31710 = ORIENTED_EDGE('',*,*,#26806,.F.); +#31711 = PLANE('',#31712); +#31712 = AXIS2_PLACEMENT_3D('',#31713,#31714,#31715); +#31713 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#31714 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31715 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31716 = ADVANCED_FACE('',(#31717),#31723,.T.); +#31717 = FACE_BOUND('',#31718,.T.); +#31718 = EDGE_LOOP('',(#31719,#31720,#31721,#31722)); +#31719 = ORIENTED_EDGE('',*,*,#26772,.T.); +#31720 = ORIENTED_EDGE('',*,*,#26734,.T.); +#31721 = ORIENTED_EDGE('',*,*,#31703,.F.); +#31722 = ORIENTED_EDGE('',*,*,#26798,.F.); +#31723 = PLANE('',#31724); +#31724 = AXIS2_PLACEMENT_3D('',#31725,#31726,#31727); +#31725 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#31726 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31727 = DIRECTION('',(0.,0.,-1.)); +#31728 = ADVANCED_FACE('',(#31729),#31740,.T.); +#31729 = FACE_BOUND('',#31730,.T.); +#31730 = EDGE_LOOP('',(#31731,#31737,#31738,#31739)); +#31731 = ORIENTED_EDGE('',*,*,#31732,.T.); +#31732 = EDGE_CURVE('',#26918,#26854,#31733,.T.); +#31733 = LINE('',#31734,#31735); +#31734 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#31735 = VECTOR('',#31736,1.); +#31736 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31737 = ORIENTED_EDGE('',*,*,#26853,.T.); +#31738 = ORIENTED_EDGE('',*,*,#26838,.F.); +#31739 = ORIENTED_EDGE('',*,*,#26917,.F.); +#31740 = PLANE('',#31741); +#31741 = AXIS2_PLACEMENT_3D('',#31742,#31743,#31744); +#31742 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#31743 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31744 = DIRECTION('',(0.,0.,1.)); +#31745 = ADVANCED_FACE('',(#31746),#31757,.T.); +#31746 = FACE_BOUND('',#31747,.T.); +#31747 = EDGE_LOOP('',(#31748,#31754,#31755,#31756)); +#31748 = ORIENTED_EDGE('',*,*,#31749,.T.); +#31749 = EDGE_CURVE('',#26943,#26879,#31750,.T.); +#31750 = LINE('',#31751,#31752); +#31751 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#31752 = VECTOR('',#31753,1.); +#31753 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31754 = ORIENTED_EDGE('',*,*,#26886,.T.); +#31755 = ORIENTED_EDGE('',*,*,#31732,.F.); +#31756 = ORIENTED_EDGE('',*,*,#26950,.F.); +#31757 = PLANE('',#31758); +#31758 = AXIS2_PLACEMENT_3D('',#31759,#31760,#31761); +#31759 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#31760 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31761 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31762 = ADVANCED_FACE('',(#31763),#31774,.T.); +#31763 = FACE_BOUND('',#31764,.T.); +#31764 = EDGE_LOOP('',(#31765,#31771,#31772,#31773)); +#31765 = ORIENTED_EDGE('',*,*,#31766,.T.); +#31766 = EDGE_CURVE('',#26935,#26871,#31767,.T.); +#31767 = LINE('',#31768,#31769); +#31768 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#31769 = VECTOR('',#31770,1.); +#31770 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31771 = ORIENTED_EDGE('',*,*,#26878,.T.); +#31772 = ORIENTED_EDGE('',*,*,#31749,.F.); +#31773 = ORIENTED_EDGE('',*,*,#26942,.T.); +#31774 = PLANE('',#31775); +#31775 = AXIS2_PLACEMENT_3D('',#31776,#31777,#31778); +#31776 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#31777 = DIRECTION('',(0.,-0.,-1.)); +#31778 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31779 = ADVANCED_FACE('',(#31780),#31791,.T.); +#31780 = FACE_BOUND('',#31781,.T.); +#31781 = EDGE_LOOP('',(#31782,#31788,#31789,#31790)); +#31782 = ORIENTED_EDGE('',*,*,#31783,.T.); +#31783 = EDGE_CURVE('',#26927,#26863,#31784,.T.); +#31784 = LINE('',#31785,#31786); +#31785 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#31786 = VECTOR('',#31787,1.); +#31787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31788 = ORIENTED_EDGE('',*,*,#26870,.T.); +#31789 = ORIENTED_EDGE('',*,*,#31766,.F.); +#31790 = ORIENTED_EDGE('',*,*,#26934,.F.); +#31791 = PLANE('',#31792); +#31792 = AXIS2_PLACEMENT_3D('',#31793,#31794,#31795); +#31793 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#31794 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31795 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31796 = ADVANCED_FACE('',(#31797),#31803,.T.); +#31797 = FACE_BOUND('',#31798,.T.); +#31798 = EDGE_LOOP('',(#31799,#31800,#31801,#31802)); +#31799 = ORIENTED_EDGE('',*,*,#26900,.T.); +#31800 = ORIENTED_EDGE('',*,*,#26862,.T.); +#31801 = ORIENTED_EDGE('',*,*,#31783,.F.); +#31802 = ORIENTED_EDGE('',*,*,#26926,.F.); +#31803 = PLANE('',#31804); +#31804 = AXIS2_PLACEMENT_3D('',#31805,#31806,#31807); +#31805 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#31806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31807 = DIRECTION('',(0.,0.,-1.)); +#31808 = ADVANCED_FACE('',(#31809),#31820,.T.); +#31809 = FACE_BOUND('',#31810,.T.); +#31810 = EDGE_LOOP('',(#31811,#31817,#31818,#31819)); +#31811 = ORIENTED_EDGE('',*,*,#31812,.T.); +#31812 = EDGE_CURVE('',#27046,#26982,#31813,.T.); +#31813 = LINE('',#31814,#31815); +#31814 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#31815 = VECTOR('',#31816,1.); +#31816 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31817 = ORIENTED_EDGE('',*,*,#26981,.T.); +#31818 = ORIENTED_EDGE('',*,*,#26966,.F.); +#31819 = ORIENTED_EDGE('',*,*,#27045,.F.); +#31820 = PLANE('',#31821); +#31821 = AXIS2_PLACEMENT_3D('',#31822,#31823,#31824); +#31822 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#31823 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31824 = DIRECTION('',(0.,0.,1.)); +#31825 = ADVANCED_FACE('',(#31826),#31837,.T.); +#31826 = FACE_BOUND('',#31827,.T.); +#31827 = EDGE_LOOP('',(#31828,#31834,#31835,#31836)); +#31828 = ORIENTED_EDGE('',*,*,#31829,.T.); +#31829 = EDGE_CURVE('',#27071,#27007,#31830,.T.); +#31830 = LINE('',#31831,#31832); +#31831 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#31832 = VECTOR('',#31833,1.); +#31833 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31834 = ORIENTED_EDGE('',*,*,#27014,.T.); +#31835 = ORIENTED_EDGE('',*,*,#31812,.F.); +#31836 = ORIENTED_EDGE('',*,*,#27078,.F.); +#31837 = PLANE('',#31838); +#31838 = AXIS2_PLACEMENT_3D('',#31839,#31840,#31841); +#31839 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#31840 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31841 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31842 = ADVANCED_FACE('',(#31843),#31854,.T.); +#31843 = FACE_BOUND('',#31844,.T.); +#31844 = EDGE_LOOP('',(#31845,#31851,#31852,#31853)); +#31845 = ORIENTED_EDGE('',*,*,#31846,.T.); +#31846 = EDGE_CURVE('',#27063,#26999,#31847,.T.); +#31847 = LINE('',#31848,#31849); +#31848 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#31849 = VECTOR('',#31850,1.); +#31850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31851 = ORIENTED_EDGE('',*,*,#27006,.T.); +#31852 = ORIENTED_EDGE('',*,*,#31829,.F.); +#31853 = ORIENTED_EDGE('',*,*,#27070,.T.); +#31854 = PLANE('',#31855); +#31855 = AXIS2_PLACEMENT_3D('',#31856,#31857,#31858); +#31856 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#31857 = DIRECTION('',(0.,-0.,-1.)); +#31858 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31859 = ADVANCED_FACE('',(#31860),#31871,.T.); +#31860 = FACE_BOUND('',#31861,.T.); +#31861 = EDGE_LOOP('',(#31862,#31868,#31869,#31870)); +#31862 = ORIENTED_EDGE('',*,*,#31863,.T.); +#31863 = EDGE_CURVE('',#27055,#26991,#31864,.T.); +#31864 = LINE('',#31865,#31866); +#31865 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#31866 = VECTOR('',#31867,1.); +#31867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31868 = ORIENTED_EDGE('',*,*,#26998,.T.); +#31869 = ORIENTED_EDGE('',*,*,#31846,.F.); +#31870 = ORIENTED_EDGE('',*,*,#27062,.F.); +#31871 = PLANE('',#31872); +#31872 = AXIS2_PLACEMENT_3D('',#31873,#31874,#31875); +#31873 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#31874 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31875 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31876 = ADVANCED_FACE('',(#31877),#31883,.T.); +#31877 = FACE_BOUND('',#31878,.T.); +#31878 = EDGE_LOOP('',(#31879,#31880,#31881,#31882)); +#31879 = ORIENTED_EDGE('',*,*,#27028,.T.); +#31880 = ORIENTED_EDGE('',*,*,#26990,.T.); +#31881 = ORIENTED_EDGE('',*,*,#31863,.F.); +#31882 = ORIENTED_EDGE('',*,*,#27054,.F.); +#31883 = PLANE('',#31884); +#31884 = AXIS2_PLACEMENT_3D('',#31885,#31886,#31887); +#31885 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#31886 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31887 = DIRECTION('',(0.,0.,-1.)); +#31888 = ADVANCED_FACE('',(#31889),#31900,.T.); +#31889 = FACE_BOUND('',#31890,.T.); +#31890 = EDGE_LOOP('',(#31891,#31892,#31893,#31894)); +#31891 = ORIENTED_EDGE('',*,*,#27237,.T.); +#31892 = ORIENTED_EDGE('',*,*,#27100,.T.); +#31893 = ORIENTED_EDGE('',*,*,#27125,.T.); +#31894 = ORIENTED_EDGE('',*,*,#31895,.T.); +#31895 = EDGE_CURVE('',#27126,#27230,#31896,.T.); +#31896 = LINE('',#31897,#31898); +#31897 = CARTESIAN_POINT('',(9.999999999999E-02,-48.26,0.9)); +#31898 = VECTOR('',#31899,1.); +#31899 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31900 = PLANE('',#31901); +#31901 = AXIS2_PLACEMENT_3D('',#31902,#31903,#31904); +#31902 = CARTESIAN_POINT('',(-5.451611384544E-15,-48.26,0.9)); +#31903 = DIRECTION('',(0.,0.,1.)); +#31904 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#31905 = ADVANCED_FACE('',(#31906),#31917,.T.); +#31906 = FACE_BOUND('',#31907,.T.); +#31907 = EDGE_LOOP('',(#31908,#31909,#31915,#31916)); +#31908 = ORIENTED_EDGE('',*,*,#27205,.T.); +#31909 = ORIENTED_EDGE('',*,*,#31910,.F.); +#31910 = EDGE_CURVE('',#27150,#27206,#31911,.T.); +#31911 = LINE('',#31912,#31913); +#31912 = CARTESIAN_POINT('',(-0.1,-48.26,0.9)); +#31913 = VECTOR('',#31914,1.); +#31914 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31915 = ORIENTED_EDGE('',*,*,#27157,.T.); +#31916 = ORIENTED_EDGE('',*,*,#27180,.T.); +#31917 = PLANE('',#31918); +#31918 = AXIS2_PLACEMENT_3D('',#31919,#31920,#31921); +#31919 = CARTESIAN_POINT('',(-5.451611384544E-15,-48.26,0.9)); +#31920 = DIRECTION('',(0.,0.,1.)); +#31921 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#31922 = ADVANCED_FACE('',(#31923),#31966,.T.); +#31923 = FACE_BOUND('',#31924,.T.); +#31924 = EDGE_LOOP('',(#31925,#31926,#31934,#31942,#31950,#31958,#31964, + #31965)); +#31925 = ORIENTED_EDGE('',*,*,#27213,.F.); +#31926 = ORIENTED_EDGE('',*,*,#31927,.T.); +#31927 = EDGE_CURVE('',#27214,#31928,#31930,.T.); +#31928 = VERTEX_POINT('',#31929); +#31929 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#31930 = LINE('',#31931,#31932); +#31931 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#31932 = VECTOR('',#31933,1.); +#31933 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#31934 = ORIENTED_EDGE('',*,*,#31935,.T.); +#31935 = EDGE_CURVE('',#31928,#31936,#31938,.T.); +#31936 = VERTEX_POINT('',#31937); +#31937 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#31938 = LINE('',#31939,#31940); +#31939 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#31940 = VECTOR('',#31941,1.); +#31941 = DIRECTION('',(0.,0.,-1.)); +#31942 = ORIENTED_EDGE('',*,*,#31943,.T.); +#31943 = EDGE_CURVE('',#31936,#31944,#31946,.T.); +#31944 = VERTEX_POINT('',#31945); +#31945 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#31946 = LINE('',#31947,#31948); +#31947 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#31948 = VECTOR('',#31949,1.); +#31949 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31950 = ORIENTED_EDGE('',*,*,#31951,.T.); +#31951 = EDGE_CURVE('',#31944,#31952,#31954,.T.); +#31952 = VERTEX_POINT('',#31953); +#31953 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31954 = LINE('',#31955,#31956); +#31955 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#31956 = VECTOR('',#31957,1.); +#31957 = DIRECTION('',(0.,0.,1.)); +#31958 = ORIENTED_EDGE('',*,*,#31959,.T.); +#31959 = EDGE_CURVE('',#31952,#27142,#31960,.T.); +#31960 = LINE('',#31961,#31962); +#31961 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31962 = VECTOR('',#31963,1.); +#31963 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#31964 = ORIENTED_EDGE('',*,*,#27149,.F.); +#31965 = ORIENTED_EDGE('',*,*,#31910,.T.); +#31966 = PLANE('',#31967); +#31967 = AXIS2_PLACEMENT_3D('',#31968,#31969,#31970); +#31968 = CARTESIAN_POINT('',(-0.1,-48.26,3.911477598424)); +#31969 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#31970 = DIRECTION('',(0.,0.,1.)); +#31971 = ADVANCED_FACE('',(#31972),#31990,.T.); +#31972 = FACE_BOUND('',#31973,.T.); +#31973 = EDGE_LOOP('',(#31974,#31982,#31988,#31989)); +#31974 = ORIENTED_EDGE('',*,*,#31975,.T.); +#31975 = EDGE_CURVE('',#31952,#31976,#31978,.T.); +#31976 = VERTEX_POINT('',#31977); +#31977 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,7.35)); +#31978 = LINE('',#31979,#31980); +#31979 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31980 = VECTOR('',#31981,1.); +#31981 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31982 = ORIENTED_EDGE('',*,*,#31983,.T.); +#31983 = EDGE_CURVE('',#31976,#27134,#31984,.T.); +#31984 = LINE('',#31985,#31986); +#31985 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,7.35)); +#31986 = VECTOR('',#31987,1.); +#31987 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#31988 = ORIENTED_EDGE('',*,*,#27141,.F.); +#31989 = ORIENTED_EDGE('',*,*,#31959,.F.); +#31990 = PLANE('',#31991); +#31991 = AXIS2_PLACEMENT_3D('',#31992,#31993,#31994); +#31992 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31993 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#31994 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#31995 = ADVANCED_FACE('',(#31996),#32032,.F.); +#31996 = FACE_BOUND('',#31997,.F.); +#31997 = EDGE_LOOP('',(#31998,#31999,#32007,#32015,#32023,#32029,#32030, + #32031)); +#31998 = ORIENTED_EDGE('',*,*,#27229,.F.); +#31999 = ORIENTED_EDGE('',*,*,#32000,.T.); +#32000 = EDGE_CURVE('',#27222,#32001,#32003,.T.); +#32001 = VERTEX_POINT('',#32002); +#32002 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,7.35)); +#32003 = LINE('',#32004,#32005); +#32004 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,7.4)); +#32005 = VECTOR('',#32006,1.); +#32006 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32007 = ORIENTED_EDGE('',*,*,#32008,.T.); +#32008 = EDGE_CURVE('',#32001,#32009,#32011,.T.); +#32009 = VERTEX_POINT('',#32010); +#32010 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,1.25)); +#32011 = LINE('',#32012,#32013); +#32012 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,7.35)); +#32013 = VECTOR('',#32014,1.); +#32014 = DIRECTION('',(0.,0.,-1.)); +#32015 = ORIENTED_EDGE('',*,*,#32016,.T.); +#32016 = EDGE_CURVE('',#32009,#32017,#32019,.T.); +#32017 = VERTEX_POINT('',#32018); +#32018 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,1.25)); +#32019 = LINE('',#32020,#32021); +#32020 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,1.25)); +#32021 = VECTOR('',#32022,1.); +#32022 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32023 = ORIENTED_EDGE('',*,*,#32024,.T.); +#32024 = EDGE_CURVE('',#32017,#31976,#32025,.T.); +#32025 = LINE('',#32026,#32027); +#32026 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,1.25)); +#32027 = VECTOR('',#32028,1.); +#32028 = DIRECTION('',(0.,0.,1.)); +#32029 = ORIENTED_EDGE('',*,*,#31983,.T.); +#32030 = ORIENTED_EDGE('',*,*,#27133,.F.); +#32031 = ORIENTED_EDGE('',*,*,#31895,.T.); +#32032 = PLANE('',#32033); +#32033 = AXIS2_PLACEMENT_3D('',#32034,#32035,#32036); +#32034 = CARTESIAN_POINT('',(9.999999999999E-02,-48.26,3.911477598424)); +#32035 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32036 = DIRECTION('',(0.,0.,1.)); +#32037 = ADVANCED_FACE('',(#32038),#32049,.T.); +#32038 = FACE_BOUND('',#32039,.T.); +#32039 = EDGE_LOOP('',(#32040,#32041,#32042,#32048)); +#32040 = ORIENTED_EDGE('',*,*,#27221,.T.); +#32041 = ORIENTED_EDGE('',*,*,#32000,.T.); +#32042 = ORIENTED_EDGE('',*,*,#32043,.F.); +#32043 = EDGE_CURVE('',#31928,#32001,#32044,.T.); +#32044 = LINE('',#32045,#32046); +#32045 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#32046 = VECTOR('',#32047,1.); +#32047 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32048 = ORIENTED_EDGE('',*,*,#31927,.F.); +#32049 = PLANE('',#32050); +#32050 = AXIS2_PLACEMENT_3D('',#32051,#32052,#32053); +#32051 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#32052 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32053 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32054 = ADVANCED_FACE('',(#32055),#32066,.T.); +#32055 = FACE_BOUND('',#32056,.T.); +#32056 = EDGE_LOOP('',(#32057,#32058,#32059,#32060)); +#32057 = ORIENTED_EDGE('',*,*,#27397,.T.); +#32058 = ORIENTED_EDGE('',*,*,#27260,.T.); +#32059 = ORIENTED_EDGE('',*,*,#27285,.T.); +#32060 = ORIENTED_EDGE('',*,*,#32061,.T.); +#32061 = EDGE_CURVE('',#27286,#27390,#32062,.T.); +#32062 = LINE('',#32063,#32064); +#32063 = CARTESIAN_POINT('',(9.999999999999E-02,-45.72,0.9)); +#32064 = VECTOR('',#32065,1.); +#32065 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32066 = PLANE('',#32067); +#32067 = AXIS2_PLACEMENT_3D('',#32068,#32069,#32070); +#32068 = CARTESIAN_POINT('',(-5.169614736289E-15,-45.72,0.9)); +#32069 = DIRECTION('',(0.,0.,1.)); +#32070 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32071 = ADVANCED_FACE('',(#32072),#32083,.T.); +#32072 = FACE_BOUND('',#32073,.T.); +#32073 = EDGE_LOOP('',(#32074,#32075,#32081,#32082)); +#32074 = ORIENTED_EDGE('',*,*,#27365,.T.); +#32075 = ORIENTED_EDGE('',*,*,#32076,.F.); +#32076 = EDGE_CURVE('',#27310,#27366,#32077,.T.); +#32077 = LINE('',#32078,#32079); +#32078 = CARTESIAN_POINT('',(-0.1,-45.72,0.9)); +#32079 = VECTOR('',#32080,1.); +#32080 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32081 = ORIENTED_EDGE('',*,*,#27317,.T.); +#32082 = ORIENTED_EDGE('',*,*,#27340,.T.); +#32083 = PLANE('',#32084); +#32084 = AXIS2_PLACEMENT_3D('',#32085,#32086,#32087); +#32085 = CARTESIAN_POINT('',(-5.169614736289E-15,-45.72,0.9)); +#32086 = DIRECTION('',(0.,0.,1.)); +#32087 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32088 = ADVANCED_FACE('',(#32089),#32132,.T.); +#32089 = FACE_BOUND('',#32090,.T.); +#32090 = EDGE_LOOP('',(#32091,#32092,#32100,#32108,#32116,#32124,#32130, + #32131)); +#32091 = ORIENTED_EDGE('',*,*,#27373,.F.); +#32092 = ORIENTED_EDGE('',*,*,#32093,.T.); +#32093 = EDGE_CURVE('',#27374,#32094,#32096,.T.); +#32094 = VERTEX_POINT('',#32095); +#32095 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#32096 = LINE('',#32097,#32098); +#32097 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#32098 = VECTOR('',#32099,1.); +#32099 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32100 = ORIENTED_EDGE('',*,*,#32101,.T.); +#32101 = EDGE_CURVE('',#32094,#32102,#32104,.T.); +#32102 = VERTEX_POINT('',#32103); +#32103 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#32104 = LINE('',#32105,#32106); +#32105 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#32106 = VECTOR('',#32107,1.); +#32107 = DIRECTION('',(0.,0.,-1.)); +#32108 = ORIENTED_EDGE('',*,*,#32109,.T.); +#32109 = EDGE_CURVE('',#32102,#32110,#32112,.T.); +#32110 = VERTEX_POINT('',#32111); +#32111 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#32112 = LINE('',#32113,#32114); +#32113 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#32114 = VECTOR('',#32115,1.); +#32115 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32116 = ORIENTED_EDGE('',*,*,#32117,.T.); +#32117 = EDGE_CURVE('',#32110,#32118,#32120,.T.); +#32118 = VERTEX_POINT('',#32119); +#32119 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32120 = LINE('',#32121,#32122); +#32121 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#32122 = VECTOR('',#32123,1.); +#32123 = DIRECTION('',(0.,0.,1.)); +#32124 = ORIENTED_EDGE('',*,*,#32125,.T.); +#32125 = EDGE_CURVE('',#32118,#27302,#32126,.T.); +#32126 = LINE('',#32127,#32128); +#32127 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32128 = VECTOR('',#32129,1.); +#32129 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32130 = ORIENTED_EDGE('',*,*,#27309,.F.); +#32131 = ORIENTED_EDGE('',*,*,#32076,.T.); +#32132 = PLANE('',#32133); +#32133 = AXIS2_PLACEMENT_3D('',#32134,#32135,#32136); +#32134 = CARTESIAN_POINT('',(-0.1,-45.72,3.911477598424)); +#32135 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32136 = DIRECTION('',(0.,0.,1.)); +#32137 = ADVANCED_FACE('',(#32138),#32156,.T.); +#32138 = FACE_BOUND('',#32139,.T.); +#32139 = EDGE_LOOP('',(#32140,#32148,#32154,#32155)); +#32140 = ORIENTED_EDGE('',*,*,#32141,.T.); +#32141 = EDGE_CURVE('',#32118,#32142,#32144,.T.); +#32142 = VERTEX_POINT('',#32143); +#32143 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,7.35)); +#32144 = LINE('',#32145,#32146); +#32145 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32146 = VECTOR('',#32147,1.); +#32147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32148 = ORIENTED_EDGE('',*,*,#32149,.T.); +#32149 = EDGE_CURVE('',#32142,#27294,#32150,.T.); +#32150 = LINE('',#32151,#32152); +#32151 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,7.35)); +#32152 = VECTOR('',#32153,1.); +#32153 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32154 = ORIENTED_EDGE('',*,*,#27301,.F.); +#32155 = ORIENTED_EDGE('',*,*,#32125,.F.); +#32156 = PLANE('',#32157); +#32157 = AXIS2_PLACEMENT_3D('',#32158,#32159,#32160); +#32158 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32159 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32160 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32161 = ADVANCED_FACE('',(#32162),#32198,.F.); +#32162 = FACE_BOUND('',#32163,.F.); +#32163 = EDGE_LOOP('',(#32164,#32165,#32173,#32181,#32189,#32195,#32196, + #32197)); +#32164 = ORIENTED_EDGE('',*,*,#27389,.F.); +#32165 = ORIENTED_EDGE('',*,*,#32166,.T.); +#32166 = EDGE_CURVE('',#27382,#32167,#32169,.T.); +#32167 = VERTEX_POINT('',#32168); +#32168 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,7.35)); +#32169 = LINE('',#32170,#32171); +#32170 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,7.4)); +#32171 = VECTOR('',#32172,1.); +#32172 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32173 = ORIENTED_EDGE('',*,*,#32174,.T.); +#32174 = EDGE_CURVE('',#32167,#32175,#32177,.T.); +#32175 = VERTEX_POINT('',#32176); +#32176 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,1.25)); +#32177 = LINE('',#32178,#32179); +#32178 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,7.35)); +#32179 = VECTOR('',#32180,1.); +#32180 = DIRECTION('',(0.,0.,-1.)); +#32181 = ORIENTED_EDGE('',*,*,#32182,.T.); +#32182 = EDGE_CURVE('',#32175,#32183,#32185,.T.); +#32183 = VERTEX_POINT('',#32184); +#32184 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,1.25)); +#32185 = LINE('',#32186,#32187); +#32186 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,1.25)); +#32187 = VECTOR('',#32188,1.); +#32188 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32189 = ORIENTED_EDGE('',*,*,#32190,.T.); +#32190 = EDGE_CURVE('',#32183,#32142,#32191,.T.); +#32191 = LINE('',#32192,#32193); +#32192 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,1.25)); +#32193 = VECTOR('',#32194,1.); +#32194 = DIRECTION('',(0.,0.,1.)); +#32195 = ORIENTED_EDGE('',*,*,#32149,.T.); +#32196 = ORIENTED_EDGE('',*,*,#27293,.F.); +#32197 = ORIENTED_EDGE('',*,*,#32061,.T.); +#32198 = PLANE('',#32199); +#32199 = AXIS2_PLACEMENT_3D('',#32200,#32201,#32202); +#32200 = CARTESIAN_POINT('',(9.999999999999E-02,-45.72,3.911477598424)); +#32201 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32202 = DIRECTION('',(0.,0.,1.)); +#32203 = ADVANCED_FACE('',(#32204),#32215,.T.); +#32204 = FACE_BOUND('',#32205,.T.); +#32205 = EDGE_LOOP('',(#32206,#32207,#32208,#32214)); +#32206 = ORIENTED_EDGE('',*,*,#27381,.T.); +#32207 = ORIENTED_EDGE('',*,*,#32166,.T.); +#32208 = ORIENTED_EDGE('',*,*,#32209,.F.); +#32209 = EDGE_CURVE('',#32094,#32167,#32210,.T.); +#32210 = LINE('',#32211,#32212); +#32211 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#32212 = VECTOR('',#32213,1.); +#32213 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32214 = ORIENTED_EDGE('',*,*,#32093,.F.); +#32215 = PLANE('',#32216); +#32216 = AXIS2_PLACEMENT_3D('',#32217,#32218,#32219); +#32217 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#32218 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32219 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32220 = ADVANCED_FACE('',(#32221),#32232,.T.); +#32221 = FACE_BOUND('',#32222,.T.); +#32222 = EDGE_LOOP('',(#32223,#32224,#32225,#32226)); +#32223 = ORIENTED_EDGE('',*,*,#27557,.T.); +#32224 = ORIENTED_EDGE('',*,*,#27420,.T.); +#32225 = ORIENTED_EDGE('',*,*,#27445,.T.); +#32226 = ORIENTED_EDGE('',*,*,#32227,.T.); +#32227 = EDGE_CURVE('',#27446,#27550,#32228,.T.); +#32228 = LINE('',#32229,#32230); +#32229 = CARTESIAN_POINT('',(0.1,-43.18,0.9)); +#32230 = VECTOR('',#32231,1.); +#32231 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32232 = PLANE('',#32233); +#32233 = AXIS2_PLACEMENT_3D('',#32234,#32235,#32236); +#32234 = CARTESIAN_POINT('',(-4.887618088034E-15,-43.18,0.9)); +#32235 = DIRECTION('',(0.,0.,1.)); +#32236 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32237 = ADVANCED_FACE('',(#32238),#32249,.T.); +#32238 = FACE_BOUND('',#32239,.T.); +#32239 = EDGE_LOOP('',(#32240,#32241,#32247,#32248)); +#32240 = ORIENTED_EDGE('',*,*,#27525,.T.); +#32241 = ORIENTED_EDGE('',*,*,#32242,.F.); +#32242 = EDGE_CURVE('',#27470,#27526,#32243,.T.); +#32243 = LINE('',#32244,#32245); +#32244 = CARTESIAN_POINT('',(-0.1,-43.18,0.9)); +#32245 = VECTOR('',#32246,1.); +#32246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32247 = ORIENTED_EDGE('',*,*,#27477,.T.); +#32248 = ORIENTED_EDGE('',*,*,#27500,.T.); +#32249 = PLANE('',#32250); +#32250 = AXIS2_PLACEMENT_3D('',#32251,#32252,#32253); +#32251 = CARTESIAN_POINT('',(-4.887618088034E-15,-43.18,0.9)); +#32252 = DIRECTION('',(0.,0.,1.)); +#32253 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32254 = ADVANCED_FACE('',(#32255),#32298,.T.); +#32255 = FACE_BOUND('',#32256,.T.); +#32256 = EDGE_LOOP('',(#32257,#32258,#32266,#32274,#32282,#32290,#32296, + #32297)); +#32257 = ORIENTED_EDGE('',*,*,#27533,.F.); +#32258 = ORIENTED_EDGE('',*,*,#32259,.T.); +#32259 = EDGE_CURVE('',#27534,#32260,#32262,.T.); +#32260 = VERTEX_POINT('',#32261); +#32261 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#32262 = LINE('',#32263,#32264); +#32263 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#32264 = VECTOR('',#32265,1.); +#32265 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32266 = ORIENTED_EDGE('',*,*,#32267,.T.); +#32267 = EDGE_CURVE('',#32260,#32268,#32270,.T.); +#32268 = VERTEX_POINT('',#32269); +#32269 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#32270 = LINE('',#32271,#32272); +#32271 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#32272 = VECTOR('',#32273,1.); +#32273 = DIRECTION('',(0.,0.,-1.)); +#32274 = ORIENTED_EDGE('',*,*,#32275,.T.); +#32275 = EDGE_CURVE('',#32268,#32276,#32278,.T.); +#32276 = VERTEX_POINT('',#32277); +#32277 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#32278 = LINE('',#32279,#32280); +#32279 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#32280 = VECTOR('',#32281,1.); +#32281 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32282 = ORIENTED_EDGE('',*,*,#32283,.T.); +#32283 = EDGE_CURVE('',#32276,#32284,#32286,.T.); +#32284 = VERTEX_POINT('',#32285); +#32285 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32286 = LINE('',#32287,#32288); +#32287 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#32288 = VECTOR('',#32289,1.); +#32289 = DIRECTION('',(0.,0.,1.)); +#32290 = ORIENTED_EDGE('',*,*,#32291,.T.); +#32291 = EDGE_CURVE('',#32284,#27462,#32292,.T.); +#32292 = LINE('',#32293,#32294); +#32293 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32294 = VECTOR('',#32295,1.); +#32295 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32296 = ORIENTED_EDGE('',*,*,#27469,.F.); +#32297 = ORIENTED_EDGE('',*,*,#32242,.T.); +#32298 = PLANE('',#32299); +#32299 = AXIS2_PLACEMENT_3D('',#32300,#32301,#32302); +#32300 = CARTESIAN_POINT('',(-0.1,-43.18,3.911477598424)); +#32301 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32302 = DIRECTION('',(0.,0.,1.)); +#32303 = ADVANCED_FACE('',(#32304),#32322,.T.); +#32304 = FACE_BOUND('',#32305,.T.); +#32305 = EDGE_LOOP('',(#32306,#32314,#32320,#32321)); +#32306 = ORIENTED_EDGE('',*,*,#32307,.T.); +#32307 = EDGE_CURVE('',#32284,#32308,#32310,.T.); +#32308 = VERTEX_POINT('',#32309); +#32309 = CARTESIAN_POINT('',(0.1,-42.93,7.35)); +#32310 = LINE('',#32311,#32312); +#32311 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32312 = VECTOR('',#32313,1.); +#32313 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32314 = ORIENTED_EDGE('',*,*,#32315,.T.); +#32315 = EDGE_CURVE('',#32308,#27454,#32316,.T.); +#32316 = LINE('',#32317,#32318); +#32317 = CARTESIAN_POINT('',(0.1,-42.93,7.35)); +#32318 = VECTOR('',#32319,1.); +#32319 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32320 = ORIENTED_EDGE('',*,*,#27461,.F.); +#32321 = ORIENTED_EDGE('',*,*,#32291,.F.); +#32322 = PLANE('',#32323); +#32323 = AXIS2_PLACEMENT_3D('',#32324,#32325,#32326); +#32324 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32325 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32326 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32327 = ADVANCED_FACE('',(#32328),#32364,.F.); +#32328 = FACE_BOUND('',#32329,.F.); +#32329 = EDGE_LOOP('',(#32330,#32331,#32339,#32347,#32355,#32361,#32362, + #32363)); +#32330 = ORIENTED_EDGE('',*,*,#27549,.F.); +#32331 = ORIENTED_EDGE('',*,*,#32332,.T.); +#32332 = EDGE_CURVE('',#27542,#32333,#32335,.T.); +#32333 = VERTEX_POINT('',#32334); +#32334 = CARTESIAN_POINT('',(0.1,-43.43,7.35)); +#32335 = LINE('',#32336,#32337); +#32336 = CARTESIAN_POINT('',(0.1,-43.48,7.4)); +#32337 = VECTOR('',#32338,1.); +#32338 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32339 = ORIENTED_EDGE('',*,*,#32340,.T.); +#32340 = EDGE_CURVE('',#32333,#32341,#32343,.T.); +#32341 = VERTEX_POINT('',#32342); +#32342 = CARTESIAN_POINT('',(0.1,-43.43,1.25)); +#32343 = LINE('',#32344,#32345); +#32344 = CARTESIAN_POINT('',(0.1,-43.43,7.35)); +#32345 = VECTOR('',#32346,1.); +#32346 = DIRECTION('',(0.,0.,-1.)); +#32347 = ORIENTED_EDGE('',*,*,#32348,.T.); +#32348 = EDGE_CURVE('',#32341,#32349,#32351,.T.); +#32349 = VERTEX_POINT('',#32350); +#32350 = CARTESIAN_POINT('',(0.1,-42.93,1.25)); +#32351 = LINE('',#32352,#32353); +#32352 = CARTESIAN_POINT('',(0.1,-43.43,1.25)); +#32353 = VECTOR('',#32354,1.); +#32354 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32355 = ORIENTED_EDGE('',*,*,#32356,.T.); +#32356 = EDGE_CURVE('',#32349,#32308,#32357,.T.); +#32357 = LINE('',#32358,#32359); +#32358 = CARTESIAN_POINT('',(0.1,-42.93,1.25)); +#32359 = VECTOR('',#32360,1.); +#32360 = DIRECTION('',(0.,0.,1.)); +#32361 = ORIENTED_EDGE('',*,*,#32315,.T.); +#32362 = ORIENTED_EDGE('',*,*,#27453,.F.); +#32363 = ORIENTED_EDGE('',*,*,#32227,.T.); +#32364 = PLANE('',#32365); +#32365 = AXIS2_PLACEMENT_3D('',#32366,#32367,#32368); +#32366 = CARTESIAN_POINT('',(0.1,-43.18,3.911477598424)); +#32367 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32368 = DIRECTION('',(0.,0.,1.)); +#32369 = ADVANCED_FACE('',(#32370),#32381,.T.); +#32370 = FACE_BOUND('',#32371,.T.); +#32371 = EDGE_LOOP('',(#32372,#32373,#32374,#32380)); +#32372 = ORIENTED_EDGE('',*,*,#27541,.T.); +#32373 = ORIENTED_EDGE('',*,*,#32332,.T.); +#32374 = ORIENTED_EDGE('',*,*,#32375,.F.); +#32375 = EDGE_CURVE('',#32260,#32333,#32376,.T.); +#32376 = LINE('',#32377,#32378); +#32377 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#32378 = VECTOR('',#32379,1.); +#32379 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32380 = ORIENTED_EDGE('',*,*,#32259,.F.); +#32381 = PLANE('',#32382); +#32382 = AXIS2_PLACEMENT_3D('',#32383,#32384,#32385); +#32383 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#32384 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32385 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32386 = ADVANCED_FACE('',(#32387),#32398,.T.); +#32387 = FACE_BOUND('',#32388,.T.); +#32388 = EDGE_LOOP('',(#32389,#32390,#32391,#32392)); +#32389 = ORIENTED_EDGE('',*,*,#27717,.T.); +#32390 = ORIENTED_EDGE('',*,*,#27580,.T.); +#32391 = ORIENTED_EDGE('',*,*,#27605,.T.); +#32392 = ORIENTED_EDGE('',*,*,#32393,.T.); +#32393 = EDGE_CURVE('',#27606,#27710,#32394,.T.); +#32394 = LINE('',#32395,#32396); +#32395 = CARTESIAN_POINT('',(0.1,-40.64,0.9)); +#32396 = VECTOR('',#32397,1.); +#32397 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32398 = PLANE('',#32399); +#32399 = AXIS2_PLACEMENT_3D('',#32400,#32401,#32402); +#32400 = CARTESIAN_POINT('',(-4.605621439779E-15,-40.64,0.9)); +#32401 = DIRECTION('',(0.,0.,1.)); +#32402 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32403 = ADVANCED_FACE('',(#32404),#32415,.T.); +#32404 = FACE_BOUND('',#32405,.T.); +#32405 = EDGE_LOOP('',(#32406,#32407,#32413,#32414)); +#32406 = ORIENTED_EDGE('',*,*,#27685,.T.); +#32407 = ORIENTED_EDGE('',*,*,#32408,.F.); +#32408 = EDGE_CURVE('',#27630,#27686,#32409,.T.); +#32409 = LINE('',#32410,#32411); +#32410 = CARTESIAN_POINT('',(-0.1,-40.64,0.9)); +#32411 = VECTOR('',#32412,1.); +#32412 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32413 = ORIENTED_EDGE('',*,*,#27637,.T.); +#32414 = ORIENTED_EDGE('',*,*,#27660,.T.); +#32415 = PLANE('',#32416); +#32416 = AXIS2_PLACEMENT_3D('',#32417,#32418,#32419); +#32417 = CARTESIAN_POINT('',(-4.605621439779E-15,-40.64,0.9)); +#32418 = DIRECTION('',(0.,0.,1.)); +#32419 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32420 = ADVANCED_FACE('',(#32421),#32464,.T.); +#32421 = FACE_BOUND('',#32422,.T.); +#32422 = EDGE_LOOP('',(#32423,#32424,#32432,#32440,#32448,#32456,#32462, + #32463)); +#32423 = ORIENTED_EDGE('',*,*,#27693,.F.); +#32424 = ORIENTED_EDGE('',*,*,#32425,.T.); +#32425 = EDGE_CURVE('',#27694,#32426,#32428,.T.); +#32426 = VERTEX_POINT('',#32427); +#32427 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#32428 = LINE('',#32429,#32430); +#32429 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#32430 = VECTOR('',#32431,1.); +#32431 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32432 = ORIENTED_EDGE('',*,*,#32433,.T.); +#32433 = EDGE_CURVE('',#32426,#32434,#32436,.T.); +#32434 = VERTEX_POINT('',#32435); +#32435 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#32436 = LINE('',#32437,#32438); +#32437 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#32438 = VECTOR('',#32439,1.); +#32439 = DIRECTION('',(0.,0.,-1.)); +#32440 = ORIENTED_EDGE('',*,*,#32441,.T.); +#32441 = EDGE_CURVE('',#32434,#32442,#32444,.T.); +#32442 = VERTEX_POINT('',#32443); +#32443 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#32444 = LINE('',#32445,#32446); +#32445 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#32446 = VECTOR('',#32447,1.); +#32447 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32448 = ORIENTED_EDGE('',*,*,#32449,.T.); +#32449 = EDGE_CURVE('',#32442,#32450,#32452,.T.); +#32450 = VERTEX_POINT('',#32451); +#32451 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32452 = LINE('',#32453,#32454); +#32453 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#32454 = VECTOR('',#32455,1.); +#32455 = DIRECTION('',(0.,0.,1.)); +#32456 = ORIENTED_EDGE('',*,*,#32457,.T.); +#32457 = EDGE_CURVE('',#32450,#27622,#32458,.T.); +#32458 = LINE('',#32459,#32460); +#32459 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32460 = VECTOR('',#32461,1.); +#32461 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32462 = ORIENTED_EDGE('',*,*,#27629,.F.); +#32463 = ORIENTED_EDGE('',*,*,#32408,.T.); +#32464 = PLANE('',#32465); +#32465 = AXIS2_PLACEMENT_3D('',#32466,#32467,#32468); +#32466 = CARTESIAN_POINT('',(-0.1,-40.64,3.911477598424)); +#32467 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32468 = DIRECTION('',(0.,0.,1.)); +#32469 = ADVANCED_FACE('',(#32470),#32488,.T.); +#32470 = FACE_BOUND('',#32471,.T.); +#32471 = EDGE_LOOP('',(#32472,#32480,#32486,#32487)); +#32472 = ORIENTED_EDGE('',*,*,#32473,.T.); +#32473 = EDGE_CURVE('',#32450,#32474,#32476,.T.); +#32474 = VERTEX_POINT('',#32475); +#32475 = CARTESIAN_POINT('',(0.1,-40.39,7.35)); +#32476 = LINE('',#32477,#32478); +#32477 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32478 = VECTOR('',#32479,1.); +#32479 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32480 = ORIENTED_EDGE('',*,*,#32481,.T.); +#32481 = EDGE_CURVE('',#32474,#27614,#32482,.T.); +#32482 = LINE('',#32483,#32484); +#32483 = CARTESIAN_POINT('',(0.1,-40.39,7.35)); +#32484 = VECTOR('',#32485,1.); +#32485 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32486 = ORIENTED_EDGE('',*,*,#27621,.F.); +#32487 = ORIENTED_EDGE('',*,*,#32457,.F.); +#32488 = PLANE('',#32489); +#32489 = AXIS2_PLACEMENT_3D('',#32490,#32491,#32492); +#32490 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32491 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32492 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32493 = ADVANCED_FACE('',(#32494),#32530,.F.); +#32494 = FACE_BOUND('',#32495,.F.); +#32495 = EDGE_LOOP('',(#32496,#32497,#32505,#32513,#32521,#32527,#32528, + #32529)); +#32496 = ORIENTED_EDGE('',*,*,#27709,.F.); +#32497 = ORIENTED_EDGE('',*,*,#32498,.T.); +#32498 = EDGE_CURVE('',#27702,#32499,#32501,.T.); +#32499 = VERTEX_POINT('',#32500); +#32500 = CARTESIAN_POINT('',(0.1,-40.89,7.35)); +#32501 = LINE('',#32502,#32503); +#32502 = CARTESIAN_POINT('',(0.1,-40.94,7.4)); +#32503 = VECTOR('',#32504,1.); +#32504 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32505 = ORIENTED_EDGE('',*,*,#32506,.T.); +#32506 = EDGE_CURVE('',#32499,#32507,#32509,.T.); +#32507 = VERTEX_POINT('',#32508); +#32508 = CARTESIAN_POINT('',(0.1,-40.89,1.25)); +#32509 = LINE('',#32510,#32511); +#32510 = CARTESIAN_POINT('',(0.1,-40.89,7.35)); +#32511 = VECTOR('',#32512,1.); +#32512 = DIRECTION('',(0.,0.,-1.)); +#32513 = ORIENTED_EDGE('',*,*,#32514,.T.); +#32514 = EDGE_CURVE('',#32507,#32515,#32517,.T.); +#32515 = VERTEX_POINT('',#32516); +#32516 = CARTESIAN_POINT('',(0.1,-40.39,1.25)); +#32517 = LINE('',#32518,#32519); +#32518 = CARTESIAN_POINT('',(0.1,-40.89,1.25)); +#32519 = VECTOR('',#32520,1.); +#32520 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32521 = ORIENTED_EDGE('',*,*,#32522,.T.); +#32522 = EDGE_CURVE('',#32515,#32474,#32523,.T.); +#32523 = LINE('',#32524,#32525); +#32524 = CARTESIAN_POINT('',(0.1,-40.39,1.25)); +#32525 = VECTOR('',#32526,1.); +#32526 = DIRECTION('',(0.,0.,1.)); +#32527 = ORIENTED_EDGE('',*,*,#32481,.T.); +#32528 = ORIENTED_EDGE('',*,*,#27613,.F.); +#32529 = ORIENTED_EDGE('',*,*,#32393,.T.); +#32530 = PLANE('',#32531); +#32531 = AXIS2_PLACEMENT_3D('',#32532,#32533,#32534); +#32532 = CARTESIAN_POINT('',(0.1,-40.64,3.911477598424)); +#32533 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32534 = DIRECTION('',(0.,0.,1.)); +#32535 = ADVANCED_FACE('',(#32536),#32547,.T.); +#32536 = FACE_BOUND('',#32537,.T.); +#32537 = EDGE_LOOP('',(#32538,#32539,#32540,#32546)); +#32538 = ORIENTED_EDGE('',*,*,#27701,.T.); +#32539 = ORIENTED_EDGE('',*,*,#32498,.T.); +#32540 = ORIENTED_EDGE('',*,*,#32541,.F.); +#32541 = EDGE_CURVE('',#32426,#32499,#32542,.T.); +#32542 = LINE('',#32543,#32544); +#32543 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#32544 = VECTOR('',#32545,1.); +#32545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32546 = ORIENTED_EDGE('',*,*,#32425,.F.); +#32547 = PLANE('',#32548); +#32548 = AXIS2_PLACEMENT_3D('',#32549,#32550,#32551); +#32549 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#32550 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32551 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32552 = ADVANCED_FACE('',(#32553),#32564,.T.); +#32553 = FACE_BOUND('',#32554,.T.); +#32554 = EDGE_LOOP('',(#32555,#32556,#32557,#32558)); +#32555 = ORIENTED_EDGE('',*,*,#27877,.T.); +#32556 = ORIENTED_EDGE('',*,*,#27740,.T.); +#32557 = ORIENTED_EDGE('',*,*,#27765,.T.); +#32558 = ORIENTED_EDGE('',*,*,#32559,.T.); +#32559 = EDGE_CURVE('',#27766,#27870,#32560,.T.); +#32560 = LINE('',#32561,#32562); +#32561 = CARTESIAN_POINT('',(0.1,-38.1,0.9)); +#32562 = VECTOR('',#32563,1.); +#32563 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32564 = PLANE('',#32565); +#32565 = AXIS2_PLACEMENT_3D('',#32566,#32567,#32568); +#32566 = CARTESIAN_POINT('',(-4.323624791525E-15,-38.1,0.9)); +#32567 = DIRECTION('',(0.,0.,1.)); +#32568 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32569 = ADVANCED_FACE('',(#32570),#32581,.T.); +#32570 = FACE_BOUND('',#32571,.T.); +#32571 = EDGE_LOOP('',(#32572,#32573,#32579,#32580)); +#32572 = ORIENTED_EDGE('',*,*,#27845,.T.); +#32573 = ORIENTED_EDGE('',*,*,#32574,.F.); +#32574 = EDGE_CURVE('',#27790,#27846,#32575,.T.); +#32575 = LINE('',#32576,#32577); +#32576 = CARTESIAN_POINT('',(-0.1,-38.1,0.9)); +#32577 = VECTOR('',#32578,1.); +#32578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32579 = ORIENTED_EDGE('',*,*,#27797,.T.); +#32580 = ORIENTED_EDGE('',*,*,#27820,.T.); +#32581 = PLANE('',#32582); +#32582 = AXIS2_PLACEMENT_3D('',#32583,#32584,#32585); +#32583 = CARTESIAN_POINT('',(-4.323624791525E-15,-38.1,0.9)); +#32584 = DIRECTION('',(0.,0.,1.)); +#32585 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32586 = ADVANCED_FACE('',(#32587),#32630,.T.); +#32587 = FACE_BOUND('',#32588,.T.); +#32588 = EDGE_LOOP('',(#32589,#32590,#32598,#32606,#32614,#32622,#32628, + #32629)); +#32589 = ORIENTED_EDGE('',*,*,#27853,.F.); +#32590 = ORIENTED_EDGE('',*,*,#32591,.T.); +#32591 = EDGE_CURVE('',#27854,#32592,#32594,.T.); +#32592 = VERTEX_POINT('',#32593); +#32593 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#32594 = LINE('',#32595,#32596); +#32595 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#32596 = VECTOR('',#32597,1.); +#32597 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32598 = ORIENTED_EDGE('',*,*,#32599,.T.); +#32599 = EDGE_CURVE('',#32592,#32600,#32602,.T.); +#32600 = VERTEX_POINT('',#32601); +#32601 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#32602 = LINE('',#32603,#32604); +#32603 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#32604 = VECTOR('',#32605,1.); +#32605 = DIRECTION('',(0.,0.,-1.)); +#32606 = ORIENTED_EDGE('',*,*,#32607,.T.); +#32607 = EDGE_CURVE('',#32600,#32608,#32610,.T.); +#32608 = VERTEX_POINT('',#32609); +#32609 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#32610 = LINE('',#32611,#32612); +#32611 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#32612 = VECTOR('',#32613,1.); +#32613 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32614 = ORIENTED_EDGE('',*,*,#32615,.T.); +#32615 = EDGE_CURVE('',#32608,#32616,#32618,.T.); +#32616 = VERTEX_POINT('',#32617); +#32617 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32618 = LINE('',#32619,#32620); +#32619 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#32620 = VECTOR('',#32621,1.); +#32621 = DIRECTION('',(0.,0.,1.)); +#32622 = ORIENTED_EDGE('',*,*,#32623,.T.); +#32623 = EDGE_CURVE('',#32616,#27782,#32624,.T.); +#32624 = LINE('',#32625,#32626); +#32625 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32626 = VECTOR('',#32627,1.); +#32627 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32628 = ORIENTED_EDGE('',*,*,#27789,.F.); +#32629 = ORIENTED_EDGE('',*,*,#32574,.T.); +#32630 = PLANE('',#32631); +#32631 = AXIS2_PLACEMENT_3D('',#32632,#32633,#32634); +#32632 = CARTESIAN_POINT('',(-0.1,-38.1,3.911477598424)); +#32633 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32634 = DIRECTION('',(0.,0.,1.)); +#32635 = ADVANCED_FACE('',(#32636),#32654,.T.); +#32636 = FACE_BOUND('',#32637,.T.); +#32637 = EDGE_LOOP('',(#32638,#32646,#32652,#32653)); +#32638 = ORIENTED_EDGE('',*,*,#32639,.T.); +#32639 = EDGE_CURVE('',#32616,#32640,#32642,.T.); +#32640 = VERTEX_POINT('',#32641); +#32641 = CARTESIAN_POINT('',(0.1,-37.85,7.35)); +#32642 = LINE('',#32643,#32644); +#32643 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32644 = VECTOR('',#32645,1.); +#32645 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32646 = ORIENTED_EDGE('',*,*,#32647,.T.); +#32647 = EDGE_CURVE('',#32640,#27774,#32648,.T.); +#32648 = LINE('',#32649,#32650); +#32649 = CARTESIAN_POINT('',(0.1,-37.85,7.35)); +#32650 = VECTOR('',#32651,1.); +#32651 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32652 = ORIENTED_EDGE('',*,*,#27781,.F.); +#32653 = ORIENTED_EDGE('',*,*,#32623,.F.); +#32654 = PLANE('',#32655); +#32655 = AXIS2_PLACEMENT_3D('',#32656,#32657,#32658); +#32656 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32657 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32658 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32659 = ADVANCED_FACE('',(#32660),#32696,.F.); +#32660 = FACE_BOUND('',#32661,.F.); +#32661 = EDGE_LOOP('',(#32662,#32663,#32671,#32679,#32687,#32693,#32694, + #32695)); +#32662 = ORIENTED_EDGE('',*,*,#27869,.F.); +#32663 = ORIENTED_EDGE('',*,*,#32664,.T.); +#32664 = EDGE_CURVE('',#27862,#32665,#32667,.T.); +#32665 = VERTEX_POINT('',#32666); +#32666 = CARTESIAN_POINT('',(0.1,-38.35,7.35)); +#32667 = LINE('',#32668,#32669); +#32668 = CARTESIAN_POINT('',(0.1,-38.4,7.4)); +#32669 = VECTOR('',#32670,1.); +#32670 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32671 = ORIENTED_EDGE('',*,*,#32672,.T.); +#32672 = EDGE_CURVE('',#32665,#32673,#32675,.T.); +#32673 = VERTEX_POINT('',#32674); +#32674 = CARTESIAN_POINT('',(0.1,-38.35,1.25)); +#32675 = LINE('',#32676,#32677); +#32676 = CARTESIAN_POINT('',(0.1,-38.35,7.35)); +#32677 = VECTOR('',#32678,1.); +#32678 = DIRECTION('',(0.,0.,-1.)); +#32679 = ORIENTED_EDGE('',*,*,#32680,.T.); +#32680 = EDGE_CURVE('',#32673,#32681,#32683,.T.); +#32681 = VERTEX_POINT('',#32682); +#32682 = CARTESIAN_POINT('',(0.1,-37.85,1.25)); +#32683 = LINE('',#32684,#32685); +#32684 = CARTESIAN_POINT('',(0.1,-38.35,1.25)); +#32685 = VECTOR('',#32686,1.); +#32686 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32687 = ORIENTED_EDGE('',*,*,#32688,.T.); +#32688 = EDGE_CURVE('',#32681,#32640,#32689,.T.); +#32689 = LINE('',#32690,#32691); +#32690 = CARTESIAN_POINT('',(0.1,-37.85,1.25)); +#32691 = VECTOR('',#32692,1.); +#32692 = DIRECTION('',(0.,0.,1.)); +#32693 = ORIENTED_EDGE('',*,*,#32647,.T.); +#32694 = ORIENTED_EDGE('',*,*,#27773,.F.); +#32695 = ORIENTED_EDGE('',*,*,#32559,.T.); +#32696 = PLANE('',#32697); +#32697 = AXIS2_PLACEMENT_3D('',#32698,#32699,#32700); +#32698 = CARTESIAN_POINT('',(0.1,-38.1,3.911477598424)); +#32699 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32700 = DIRECTION('',(0.,0.,1.)); +#32701 = ADVANCED_FACE('',(#32702),#32713,.T.); +#32702 = FACE_BOUND('',#32703,.T.); +#32703 = EDGE_LOOP('',(#32704,#32705,#32706,#32712)); +#32704 = ORIENTED_EDGE('',*,*,#27861,.T.); +#32705 = ORIENTED_EDGE('',*,*,#32664,.T.); +#32706 = ORIENTED_EDGE('',*,*,#32707,.F.); +#32707 = EDGE_CURVE('',#32592,#32665,#32708,.T.); +#32708 = LINE('',#32709,#32710); +#32709 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#32710 = VECTOR('',#32711,1.); +#32711 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32712 = ORIENTED_EDGE('',*,*,#32591,.F.); +#32713 = PLANE('',#32714); +#32714 = AXIS2_PLACEMENT_3D('',#32715,#32716,#32717); +#32715 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#32716 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32717 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32718 = ADVANCED_FACE('',(#32719),#32730,.T.); +#32719 = FACE_BOUND('',#32720,.T.); +#32720 = EDGE_LOOP('',(#32721,#32722,#32723,#32724)); +#32721 = ORIENTED_EDGE('',*,*,#28037,.T.); +#32722 = ORIENTED_EDGE('',*,*,#27900,.T.); +#32723 = ORIENTED_EDGE('',*,*,#27925,.T.); +#32724 = ORIENTED_EDGE('',*,*,#32725,.T.); +#32725 = EDGE_CURVE('',#27926,#28030,#32726,.T.); +#32726 = LINE('',#32727,#32728); +#32727 = CARTESIAN_POINT('',(0.1,-35.56,0.9)); +#32728 = VECTOR('',#32729,1.); +#32729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32730 = PLANE('',#32731); +#32731 = AXIS2_PLACEMENT_3D('',#32732,#32733,#32734); +#32732 = CARTESIAN_POINT('',(-4.04162814327E-15,-35.56,0.9)); +#32733 = DIRECTION('',(0.,0.,1.)); +#32734 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32735 = ADVANCED_FACE('',(#32736),#32747,.T.); +#32736 = FACE_BOUND('',#32737,.T.); +#32737 = EDGE_LOOP('',(#32738,#32739,#32745,#32746)); +#32738 = ORIENTED_EDGE('',*,*,#28005,.T.); +#32739 = ORIENTED_EDGE('',*,*,#32740,.F.); +#32740 = EDGE_CURVE('',#27950,#28006,#32741,.T.); +#32741 = LINE('',#32742,#32743); +#32742 = CARTESIAN_POINT('',(-0.1,-35.56,0.9)); +#32743 = VECTOR('',#32744,1.); +#32744 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32745 = ORIENTED_EDGE('',*,*,#27957,.T.); +#32746 = ORIENTED_EDGE('',*,*,#27980,.T.); +#32747 = PLANE('',#32748); +#32748 = AXIS2_PLACEMENT_3D('',#32749,#32750,#32751); +#32749 = CARTESIAN_POINT('',(-4.04162814327E-15,-35.56,0.9)); +#32750 = DIRECTION('',(0.,0.,1.)); +#32751 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32752 = ADVANCED_FACE('',(#32753),#32796,.T.); +#32753 = FACE_BOUND('',#32754,.T.); +#32754 = EDGE_LOOP('',(#32755,#32756,#32764,#32772,#32780,#32788,#32794, + #32795)); +#32755 = ORIENTED_EDGE('',*,*,#28013,.F.); +#32756 = ORIENTED_EDGE('',*,*,#32757,.T.); +#32757 = EDGE_CURVE('',#28014,#32758,#32760,.T.); +#32758 = VERTEX_POINT('',#32759); +#32759 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#32760 = LINE('',#32761,#32762); +#32761 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#32762 = VECTOR('',#32763,1.); +#32763 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32764 = ORIENTED_EDGE('',*,*,#32765,.T.); +#32765 = EDGE_CURVE('',#32758,#32766,#32768,.T.); +#32766 = VERTEX_POINT('',#32767); +#32767 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#32768 = LINE('',#32769,#32770); +#32769 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#32770 = VECTOR('',#32771,1.); +#32771 = DIRECTION('',(0.,0.,-1.)); +#32772 = ORIENTED_EDGE('',*,*,#32773,.T.); +#32773 = EDGE_CURVE('',#32766,#32774,#32776,.T.); +#32774 = VERTEX_POINT('',#32775); +#32775 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#32776 = LINE('',#32777,#32778); +#32777 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#32778 = VECTOR('',#32779,1.); +#32779 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32780 = ORIENTED_EDGE('',*,*,#32781,.T.); +#32781 = EDGE_CURVE('',#32774,#32782,#32784,.T.); +#32782 = VERTEX_POINT('',#32783); +#32783 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32784 = LINE('',#32785,#32786); +#32785 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#32786 = VECTOR('',#32787,1.); +#32787 = DIRECTION('',(0.,0.,1.)); +#32788 = ORIENTED_EDGE('',*,*,#32789,.T.); +#32789 = EDGE_CURVE('',#32782,#27942,#32790,.T.); +#32790 = LINE('',#32791,#32792); +#32791 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32792 = VECTOR('',#32793,1.); +#32793 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32794 = ORIENTED_EDGE('',*,*,#27949,.F.); +#32795 = ORIENTED_EDGE('',*,*,#32740,.T.); +#32796 = PLANE('',#32797); +#32797 = AXIS2_PLACEMENT_3D('',#32798,#32799,#32800); +#32798 = CARTESIAN_POINT('',(-0.1,-35.56,3.911477598424)); +#32799 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32800 = DIRECTION('',(0.,0.,1.)); +#32801 = ADVANCED_FACE('',(#32802),#32820,.T.); +#32802 = FACE_BOUND('',#32803,.T.); +#32803 = EDGE_LOOP('',(#32804,#32812,#32818,#32819)); +#32804 = ORIENTED_EDGE('',*,*,#32805,.T.); +#32805 = EDGE_CURVE('',#32782,#32806,#32808,.T.); +#32806 = VERTEX_POINT('',#32807); +#32807 = CARTESIAN_POINT('',(0.1,-35.31,7.35)); +#32808 = LINE('',#32809,#32810); +#32809 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32810 = VECTOR('',#32811,1.); +#32811 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32812 = ORIENTED_EDGE('',*,*,#32813,.T.); +#32813 = EDGE_CURVE('',#32806,#27934,#32814,.T.); +#32814 = LINE('',#32815,#32816); +#32815 = CARTESIAN_POINT('',(0.1,-35.31,7.35)); +#32816 = VECTOR('',#32817,1.); +#32817 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32818 = ORIENTED_EDGE('',*,*,#27941,.F.); +#32819 = ORIENTED_EDGE('',*,*,#32789,.F.); +#32820 = PLANE('',#32821); +#32821 = AXIS2_PLACEMENT_3D('',#32822,#32823,#32824); +#32822 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32823 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32824 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32825 = ADVANCED_FACE('',(#32826),#32862,.F.); +#32826 = FACE_BOUND('',#32827,.F.); +#32827 = EDGE_LOOP('',(#32828,#32829,#32837,#32845,#32853,#32859,#32860, + #32861)); +#32828 = ORIENTED_EDGE('',*,*,#28029,.F.); +#32829 = ORIENTED_EDGE('',*,*,#32830,.T.); +#32830 = EDGE_CURVE('',#28022,#32831,#32833,.T.); +#32831 = VERTEX_POINT('',#32832); +#32832 = CARTESIAN_POINT('',(0.1,-35.81,7.35)); +#32833 = LINE('',#32834,#32835); +#32834 = CARTESIAN_POINT('',(0.1,-35.86,7.4)); +#32835 = VECTOR('',#32836,1.); +#32836 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32837 = ORIENTED_EDGE('',*,*,#32838,.T.); +#32838 = EDGE_CURVE('',#32831,#32839,#32841,.T.); +#32839 = VERTEX_POINT('',#32840); +#32840 = CARTESIAN_POINT('',(0.1,-35.81,1.25)); +#32841 = LINE('',#32842,#32843); +#32842 = CARTESIAN_POINT('',(0.1,-35.81,7.35)); +#32843 = VECTOR('',#32844,1.); +#32844 = DIRECTION('',(0.,0.,-1.)); +#32845 = ORIENTED_EDGE('',*,*,#32846,.T.); +#32846 = EDGE_CURVE('',#32839,#32847,#32849,.T.); +#32847 = VERTEX_POINT('',#32848); +#32848 = CARTESIAN_POINT('',(0.1,-35.31,1.25)); +#32849 = LINE('',#32850,#32851); +#32850 = CARTESIAN_POINT('',(0.1,-35.81,1.25)); +#32851 = VECTOR('',#32852,1.); +#32852 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32853 = ORIENTED_EDGE('',*,*,#32854,.T.); +#32854 = EDGE_CURVE('',#32847,#32806,#32855,.T.); +#32855 = LINE('',#32856,#32857); +#32856 = CARTESIAN_POINT('',(0.1,-35.31,1.25)); +#32857 = VECTOR('',#32858,1.); +#32858 = DIRECTION('',(0.,0.,1.)); +#32859 = ORIENTED_EDGE('',*,*,#32813,.T.); +#32860 = ORIENTED_EDGE('',*,*,#27933,.F.); +#32861 = ORIENTED_EDGE('',*,*,#32725,.T.); +#32862 = PLANE('',#32863); +#32863 = AXIS2_PLACEMENT_3D('',#32864,#32865,#32866); +#32864 = CARTESIAN_POINT('',(0.1,-35.56,3.911477598424)); +#32865 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32866 = DIRECTION('',(0.,0.,1.)); +#32867 = ADVANCED_FACE('',(#32868),#32879,.T.); +#32868 = FACE_BOUND('',#32869,.T.); +#32869 = EDGE_LOOP('',(#32870,#32871,#32872,#32878)); +#32870 = ORIENTED_EDGE('',*,*,#28021,.T.); +#32871 = ORIENTED_EDGE('',*,*,#32830,.T.); +#32872 = ORIENTED_EDGE('',*,*,#32873,.F.); +#32873 = EDGE_CURVE('',#32758,#32831,#32874,.T.); +#32874 = LINE('',#32875,#32876); +#32875 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#32876 = VECTOR('',#32877,1.); +#32877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32878 = ORIENTED_EDGE('',*,*,#32757,.F.); +#32879 = PLANE('',#32880); +#32880 = AXIS2_PLACEMENT_3D('',#32881,#32882,#32883); +#32881 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#32882 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32883 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32884 = ADVANCED_FACE('',(#32885),#32896,.T.); +#32885 = FACE_BOUND('',#32886,.T.); +#32886 = EDGE_LOOP('',(#32887,#32888,#32889,#32890)); +#32887 = ORIENTED_EDGE('',*,*,#28197,.T.); +#32888 = ORIENTED_EDGE('',*,*,#28060,.T.); +#32889 = ORIENTED_EDGE('',*,*,#28085,.T.); +#32890 = ORIENTED_EDGE('',*,*,#32891,.T.); +#32891 = EDGE_CURVE('',#28086,#28190,#32892,.T.); +#32892 = LINE('',#32893,#32894); +#32893 = CARTESIAN_POINT('',(0.1,-33.02,0.9)); +#32894 = VECTOR('',#32895,1.); +#32895 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32896 = PLANE('',#32897); +#32897 = AXIS2_PLACEMENT_3D('',#32898,#32899,#32900); +#32898 = CARTESIAN_POINT('',(-3.759631495015E-15,-33.02,0.9)); +#32899 = DIRECTION('',(0.,0.,1.)); +#32900 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32901 = ADVANCED_FACE('',(#32902),#32913,.T.); +#32902 = FACE_BOUND('',#32903,.T.); +#32903 = EDGE_LOOP('',(#32904,#32905,#32911,#32912)); +#32904 = ORIENTED_EDGE('',*,*,#28165,.T.); +#32905 = ORIENTED_EDGE('',*,*,#32906,.F.); +#32906 = EDGE_CURVE('',#28110,#28166,#32907,.T.); +#32907 = LINE('',#32908,#32909); +#32908 = CARTESIAN_POINT('',(-0.1,-33.02,0.9)); +#32909 = VECTOR('',#32910,1.); +#32910 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32911 = ORIENTED_EDGE('',*,*,#28117,.T.); +#32912 = ORIENTED_EDGE('',*,*,#28140,.T.); +#32913 = PLANE('',#32914); +#32914 = AXIS2_PLACEMENT_3D('',#32915,#32916,#32917); +#32915 = CARTESIAN_POINT('',(-3.759631495015E-15,-33.02,0.9)); +#32916 = DIRECTION('',(0.,0.,1.)); +#32917 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32918 = ADVANCED_FACE('',(#32919),#32962,.T.); +#32919 = FACE_BOUND('',#32920,.T.); +#32920 = EDGE_LOOP('',(#32921,#32922,#32930,#32938,#32946,#32954,#32960, + #32961)); +#32921 = ORIENTED_EDGE('',*,*,#28173,.F.); +#32922 = ORIENTED_EDGE('',*,*,#32923,.T.); +#32923 = EDGE_CURVE('',#28174,#32924,#32926,.T.); +#32924 = VERTEX_POINT('',#32925); +#32925 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#32926 = LINE('',#32927,#32928); +#32927 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#32928 = VECTOR('',#32929,1.); +#32929 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32930 = ORIENTED_EDGE('',*,*,#32931,.T.); +#32931 = EDGE_CURVE('',#32924,#32932,#32934,.T.); +#32932 = VERTEX_POINT('',#32933); +#32933 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#32934 = LINE('',#32935,#32936); +#32935 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#32936 = VECTOR('',#32937,1.); +#32937 = DIRECTION('',(0.,0.,-1.)); +#32938 = ORIENTED_EDGE('',*,*,#32939,.T.); +#32939 = EDGE_CURVE('',#32932,#32940,#32942,.T.); +#32940 = VERTEX_POINT('',#32941); +#32941 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#32942 = LINE('',#32943,#32944); +#32943 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#32944 = VECTOR('',#32945,1.); +#32945 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32946 = ORIENTED_EDGE('',*,*,#32947,.T.); +#32947 = EDGE_CURVE('',#32940,#32948,#32950,.T.); +#32948 = VERTEX_POINT('',#32949); +#32949 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32950 = LINE('',#32951,#32952); +#32951 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#32952 = VECTOR('',#32953,1.); +#32953 = DIRECTION('',(0.,0.,1.)); +#32954 = ORIENTED_EDGE('',*,*,#32955,.T.); +#32955 = EDGE_CURVE('',#32948,#28102,#32956,.T.); +#32956 = LINE('',#32957,#32958); +#32957 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32958 = VECTOR('',#32959,1.); +#32959 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32960 = ORIENTED_EDGE('',*,*,#28109,.F.); +#32961 = ORIENTED_EDGE('',*,*,#32906,.T.); +#32962 = PLANE('',#32963); +#32963 = AXIS2_PLACEMENT_3D('',#32964,#32965,#32966); +#32964 = CARTESIAN_POINT('',(-0.1,-33.02,3.911477598424)); +#32965 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32966 = DIRECTION('',(0.,0.,1.)); +#32967 = ADVANCED_FACE('',(#32968),#32986,.T.); +#32968 = FACE_BOUND('',#32969,.T.); +#32969 = EDGE_LOOP('',(#32970,#32978,#32984,#32985)); +#32970 = ORIENTED_EDGE('',*,*,#32971,.T.); +#32971 = EDGE_CURVE('',#32948,#32972,#32974,.T.); +#32972 = VERTEX_POINT('',#32973); +#32973 = CARTESIAN_POINT('',(0.1,-32.77,7.35)); +#32974 = LINE('',#32975,#32976); +#32975 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32976 = VECTOR('',#32977,1.); +#32977 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32978 = ORIENTED_EDGE('',*,*,#32979,.T.); +#32979 = EDGE_CURVE('',#32972,#28094,#32980,.T.); +#32980 = LINE('',#32981,#32982); +#32981 = CARTESIAN_POINT('',(0.1,-32.77,7.35)); +#32982 = VECTOR('',#32983,1.); +#32983 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32984 = ORIENTED_EDGE('',*,*,#28101,.F.); +#32985 = ORIENTED_EDGE('',*,*,#32955,.F.); +#32986 = PLANE('',#32987); +#32987 = AXIS2_PLACEMENT_3D('',#32988,#32989,#32990); +#32988 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32989 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32990 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32991 = ADVANCED_FACE('',(#32992),#33028,.F.); +#32992 = FACE_BOUND('',#32993,.F.); +#32993 = EDGE_LOOP('',(#32994,#32995,#33003,#33011,#33019,#33025,#33026, + #33027)); +#32994 = ORIENTED_EDGE('',*,*,#28189,.F.); +#32995 = ORIENTED_EDGE('',*,*,#32996,.T.); +#32996 = EDGE_CURVE('',#28182,#32997,#32999,.T.); +#32997 = VERTEX_POINT('',#32998); +#32998 = CARTESIAN_POINT('',(0.1,-33.27,7.35)); +#32999 = LINE('',#33000,#33001); +#33000 = CARTESIAN_POINT('',(0.1,-33.32,7.4)); +#33001 = VECTOR('',#33002,1.); +#33002 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33003 = ORIENTED_EDGE('',*,*,#33004,.T.); +#33004 = EDGE_CURVE('',#32997,#33005,#33007,.T.); +#33005 = VERTEX_POINT('',#33006); +#33006 = CARTESIAN_POINT('',(0.1,-33.27,1.25)); +#33007 = LINE('',#33008,#33009); +#33008 = CARTESIAN_POINT('',(0.1,-33.27,7.35)); +#33009 = VECTOR('',#33010,1.); +#33010 = DIRECTION('',(0.,0.,-1.)); +#33011 = ORIENTED_EDGE('',*,*,#33012,.T.); +#33012 = EDGE_CURVE('',#33005,#33013,#33015,.T.); +#33013 = VERTEX_POINT('',#33014); +#33014 = CARTESIAN_POINT('',(0.1,-32.77,1.25)); +#33015 = LINE('',#33016,#33017); +#33016 = CARTESIAN_POINT('',(0.1,-33.27,1.25)); +#33017 = VECTOR('',#33018,1.); +#33018 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33019 = ORIENTED_EDGE('',*,*,#33020,.T.); +#33020 = EDGE_CURVE('',#33013,#32972,#33021,.T.); +#33021 = LINE('',#33022,#33023); +#33022 = CARTESIAN_POINT('',(0.1,-32.77,1.25)); +#33023 = VECTOR('',#33024,1.); +#33024 = DIRECTION('',(0.,0.,1.)); +#33025 = ORIENTED_EDGE('',*,*,#32979,.T.); +#33026 = ORIENTED_EDGE('',*,*,#28093,.F.); +#33027 = ORIENTED_EDGE('',*,*,#32891,.T.); +#33028 = PLANE('',#33029); +#33029 = AXIS2_PLACEMENT_3D('',#33030,#33031,#33032); +#33030 = CARTESIAN_POINT('',(0.1,-33.02,3.911477598424)); +#33031 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33032 = DIRECTION('',(0.,0.,1.)); +#33033 = ADVANCED_FACE('',(#33034),#33045,.T.); +#33034 = FACE_BOUND('',#33035,.T.); +#33035 = EDGE_LOOP('',(#33036,#33037,#33038,#33044)); +#33036 = ORIENTED_EDGE('',*,*,#28181,.T.); +#33037 = ORIENTED_EDGE('',*,*,#32996,.T.); +#33038 = ORIENTED_EDGE('',*,*,#33039,.F.); +#33039 = EDGE_CURVE('',#32924,#32997,#33040,.T.); +#33040 = LINE('',#33041,#33042); +#33041 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#33042 = VECTOR('',#33043,1.); +#33043 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33044 = ORIENTED_EDGE('',*,*,#32923,.F.); +#33045 = PLANE('',#33046); +#33046 = AXIS2_PLACEMENT_3D('',#33047,#33048,#33049); +#33047 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#33048 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33049 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33050 = ADVANCED_FACE('',(#33051),#33062,.T.); +#33051 = FACE_BOUND('',#33052,.T.); +#33052 = EDGE_LOOP('',(#33053,#33054,#33055,#33056)); +#33053 = ORIENTED_EDGE('',*,*,#28357,.T.); +#33054 = ORIENTED_EDGE('',*,*,#28220,.T.); +#33055 = ORIENTED_EDGE('',*,*,#28245,.T.); +#33056 = ORIENTED_EDGE('',*,*,#33057,.T.); +#33057 = EDGE_CURVE('',#28246,#28350,#33058,.T.); +#33058 = LINE('',#33059,#33060); +#33059 = CARTESIAN_POINT('',(0.1,-30.48,0.9)); +#33060 = VECTOR('',#33061,1.); +#33061 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33062 = PLANE('',#33063); +#33063 = AXIS2_PLACEMENT_3D('',#33064,#33065,#33066); +#33064 = CARTESIAN_POINT('',(-3.47763484676E-15,-30.48,0.9)); +#33065 = DIRECTION('',(0.,0.,1.)); +#33066 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33067 = ADVANCED_FACE('',(#33068),#33079,.T.); +#33068 = FACE_BOUND('',#33069,.T.); +#33069 = EDGE_LOOP('',(#33070,#33071,#33077,#33078)); +#33070 = ORIENTED_EDGE('',*,*,#28325,.T.); +#33071 = ORIENTED_EDGE('',*,*,#33072,.F.); +#33072 = EDGE_CURVE('',#28270,#28326,#33073,.T.); +#33073 = LINE('',#33074,#33075); +#33074 = CARTESIAN_POINT('',(-0.1,-30.48,0.9)); +#33075 = VECTOR('',#33076,1.); +#33076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33077 = ORIENTED_EDGE('',*,*,#28277,.T.); +#33078 = ORIENTED_EDGE('',*,*,#28300,.T.); +#33079 = PLANE('',#33080); +#33080 = AXIS2_PLACEMENT_3D('',#33081,#33082,#33083); +#33081 = CARTESIAN_POINT('',(-3.47763484676E-15,-30.48,0.9)); +#33082 = DIRECTION('',(0.,0.,1.)); +#33083 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33084 = ADVANCED_FACE('',(#33085),#33128,.T.); +#33085 = FACE_BOUND('',#33086,.T.); +#33086 = EDGE_LOOP('',(#33087,#33088,#33096,#33104,#33112,#33120,#33126, + #33127)); +#33087 = ORIENTED_EDGE('',*,*,#28333,.F.); +#33088 = ORIENTED_EDGE('',*,*,#33089,.T.); +#33089 = EDGE_CURVE('',#28334,#33090,#33092,.T.); +#33090 = VERTEX_POINT('',#33091); +#33091 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#33092 = LINE('',#33093,#33094); +#33093 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#33094 = VECTOR('',#33095,1.); +#33095 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33096 = ORIENTED_EDGE('',*,*,#33097,.T.); +#33097 = EDGE_CURVE('',#33090,#33098,#33100,.T.); +#33098 = VERTEX_POINT('',#33099); +#33099 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#33100 = LINE('',#33101,#33102); +#33101 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#33102 = VECTOR('',#33103,1.); +#33103 = DIRECTION('',(0.,0.,-1.)); +#33104 = ORIENTED_EDGE('',*,*,#33105,.T.); +#33105 = EDGE_CURVE('',#33098,#33106,#33108,.T.); +#33106 = VERTEX_POINT('',#33107); +#33107 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#33108 = LINE('',#33109,#33110); +#33109 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#33110 = VECTOR('',#33111,1.); +#33111 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33112 = ORIENTED_EDGE('',*,*,#33113,.T.); +#33113 = EDGE_CURVE('',#33106,#33114,#33116,.T.); +#33114 = VERTEX_POINT('',#33115); +#33115 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33116 = LINE('',#33117,#33118); +#33117 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#33118 = VECTOR('',#33119,1.); +#33119 = DIRECTION('',(0.,0.,1.)); +#33120 = ORIENTED_EDGE('',*,*,#33121,.T.); +#33121 = EDGE_CURVE('',#33114,#28262,#33122,.T.); +#33122 = LINE('',#33123,#33124); +#33123 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33124 = VECTOR('',#33125,1.); +#33125 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33126 = ORIENTED_EDGE('',*,*,#28269,.F.); +#33127 = ORIENTED_EDGE('',*,*,#33072,.T.); +#33128 = PLANE('',#33129); +#33129 = AXIS2_PLACEMENT_3D('',#33130,#33131,#33132); +#33130 = CARTESIAN_POINT('',(-0.1,-30.48,3.911477598424)); +#33131 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33132 = DIRECTION('',(0.,0.,1.)); +#33133 = ADVANCED_FACE('',(#33134),#33152,.T.); +#33134 = FACE_BOUND('',#33135,.T.); +#33135 = EDGE_LOOP('',(#33136,#33144,#33150,#33151)); +#33136 = ORIENTED_EDGE('',*,*,#33137,.T.); +#33137 = EDGE_CURVE('',#33114,#33138,#33140,.T.); +#33138 = VERTEX_POINT('',#33139); +#33139 = CARTESIAN_POINT('',(0.1,-30.23,7.35)); +#33140 = LINE('',#33141,#33142); +#33141 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33142 = VECTOR('',#33143,1.); +#33143 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33144 = ORIENTED_EDGE('',*,*,#33145,.T.); +#33145 = EDGE_CURVE('',#33138,#28254,#33146,.T.); +#33146 = LINE('',#33147,#33148); +#33147 = CARTESIAN_POINT('',(0.1,-30.23,7.35)); +#33148 = VECTOR('',#33149,1.); +#33149 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33150 = ORIENTED_EDGE('',*,*,#28261,.F.); +#33151 = ORIENTED_EDGE('',*,*,#33121,.F.); +#33152 = PLANE('',#33153); +#33153 = AXIS2_PLACEMENT_3D('',#33154,#33155,#33156); +#33154 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33155 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33156 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33157 = ADVANCED_FACE('',(#33158),#33194,.F.); +#33158 = FACE_BOUND('',#33159,.F.); +#33159 = EDGE_LOOP('',(#33160,#33161,#33169,#33177,#33185,#33191,#33192, + #33193)); +#33160 = ORIENTED_EDGE('',*,*,#28349,.F.); +#33161 = ORIENTED_EDGE('',*,*,#33162,.T.); +#33162 = EDGE_CURVE('',#28342,#33163,#33165,.T.); +#33163 = VERTEX_POINT('',#33164); +#33164 = CARTESIAN_POINT('',(0.1,-30.73,7.35)); +#33165 = LINE('',#33166,#33167); +#33166 = CARTESIAN_POINT('',(0.1,-30.78,7.4)); +#33167 = VECTOR('',#33168,1.); +#33168 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33169 = ORIENTED_EDGE('',*,*,#33170,.T.); +#33170 = EDGE_CURVE('',#33163,#33171,#33173,.T.); +#33171 = VERTEX_POINT('',#33172); +#33172 = CARTESIAN_POINT('',(0.1,-30.73,1.25)); +#33173 = LINE('',#33174,#33175); +#33174 = CARTESIAN_POINT('',(0.1,-30.73,7.35)); +#33175 = VECTOR('',#33176,1.); +#33176 = DIRECTION('',(0.,0.,-1.)); +#33177 = ORIENTED_EDGE('',*,*,#33178,.T.); +#33178 = EDGE_CURVE('',#33171,#33179,#33181,.T.); +#33179 = VERTEX_POINT('',#33180); +#33180 = CARTESIAN_POINT('',(0.1,-30.23,1.25)); +#33181 = LINE('',#33182,#33183); +#33182 = CARTESIAN_POINT('',(0.1,-30.73,1.25)); +#33183 = VECTOR('',#33184,1.); +#33184 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33185 = ORIENTED_EDGE('',*,*,#33186,.T.); +#33186 = EDGE_CURVE('',#33179,#33138,#33187,.T.); +#33187 = LINE('',#33188,#33189); +#33188 = CARTESIAN_POINT('',(0.1,-30.23,1.25)); +#33189 = VECTOR('',#33190,1.); +#33190 = DIRECTION('',(0.,0.,1.)); +#33191 = ORIENTED_EDGE('',*,*,#33145,.T.); +#33192 = ORIENTED_EDGE('',*,*,#28253,.F.); +#33193 = ORIENTED_EDGE('',*,*,#33057,.T.); +#33194 = PLANE('',#33195); +#33195 = AXIS2_PLACEMENT_3D('',#33196,#33197,#33198); +#33196 = CARTESIAN_POINT('',(0.1,-30.48,3.911477598424)); +#33197 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33198 = DIRECTION('',(0.,0.,1.)); +#33199 = ADVANCED_FACE('',(#33200),#33211,.T.); +#33200 = FACE_BOUND('',#33201,.T.); +#33201 = EDGE_LOOP('',(#33202,#33203,#33204,#33210)); +#33202 = ORIENTED_EDGE('',*,*,#28341,.T.); +#33203 = ORIENTED_EDGE('',*,*,#33162,.T.); +#33204 = ORIENTED_EDGE('',*,*,#33205,.F.); +#33205 = EDGE_CURVE('',#33090,#33163,#33206,.T.); +#33206 = LINE('',#33207,#33208); +#33207 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#33208 = VECTOR('',#33209,1.); +#33209 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33210 = ORIENTED_EDGE('',*,*,#33089,.F.); +#33211 = PLANE('',#33212); +#33212 = AXIS2_PLACEMENT_3D('',#33213,#33214,#33215); +#33213 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#33214 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33215 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33216 = ADVANCED_FACE('',(#33217),#33228,.T.); +#33217 = FACE_BOUND('',#33218,.T.); +#33218 = EDGE_LOOP('',(#33219,#33220,#33221,#33222)); +#33219 = ORIENTED_EDGE('',*,*,#28517,.T.); +#33220 = ORIENTED_EDGE('',*,*,#28380,.T.); +#33221 = ORIENTED_EDGE('',*,*,#28405,.T.); +#33222 = ORIENTED_EDGE('',*,*,#33223,.T.); +#33223 = EDGE_CURVE('',#28406,#28510,#33224,.T.); +#33224 = LINE('',#33225,#33226); +#33225 = CARTESIAN_POINT('',(0.1,-27.94,0.9)); +#33226 = VECTOR('',#33227,1.); +#33227 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33228 = PLANE('',#33229); +#33229 = AXIS2_PLACEMENT_3D('',#33230,#33231,#33232); +#33230 = CARTESIAN_POINT('',(-3.195638198505E-15,-27.94,0.9)); +#33231 = DIRECTION('',(0.,0.,1.)); +#33232 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33233 = ADVANCED_FACE('',(#33234),#33245,.T.); +#33234 = FACE_BOUND('',#33235,.T.); +#33235 = EDGE_LOOP('',(#33236,#33237,#33243,#33244)); +#33236 = ORIENTED_EDGE('',*,*,#28485,.T.); +#33237 = ORIENTED_EDGE('',*,*,#33238,.F.); +#33238 = EDGE_CURVE('',#28430,#28486,#33239,.T.); +#33239 = LINE('',#33240,#33241); +#33240 = CARTESIAN_POINT('',(-0.1,-27.94,0.9)); +#33241 = VECTOR('',#33242,1.); +#33242 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33243 = ORIENTED_EDGE('',*,*,#28437,.T.); +#33244 = ORIENTED_EDGE('',*,*,#28460,.T.); +#33245 = PLANE('',#33246); +#33246 = AXIS2_PLACEMENT_3D('',#33247,#33248,#33249); +#33247 = CARTESIAN_POINT('',(-3.195638198505E-15,-27.94,0.9)); +#33248 = DIRECTION('',(0.,0.,1.)); +#33249 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33250 = ADVANCED_FACE('',(#33251),#33294,.T.); +#33251 = FACE_BOUND('',#33252,.T.); +#33252 = EDGE_LOOP('',(#33253,#33254,#33262,#33270,#33278,#33286,#33292, + #33293)); +#33253 = ORIENTED_EDGE('',*,*,#28493,.F.); +#33254 = ORIENTED_EDGE('',*,*,#33255,.T.); +#33255 = EDGE_CURVE('',#28494,#33256,#33258,.T.); +#33256 = VERTEX_POINT('',#33257); +#33257 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#33258 = LINE('',#33259,#33260); +#33259 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#33260 = VECTOR('',#33261,1.); +#33261 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33262 = ORIENTED_EDGE('',*,*,#33263,.T.); +#33263 = EDGE_CURVE('',#33256,#33264,#33266,.T.); +#33264 = VERTEX_POINT('',#33265); +#33265 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#33266 = LINE('',#33267,#33268); +#33267 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#33268 = VECTOR('',#33269,1.); +#33269 = DIRECTION('',(0.,0.,-1.)); +#33270 = ORIENTED_EDGE('',*,*,#33271,.T.); +#33271 = EDGE_CURVE('',#33264,#33272,#33274,.T.); +#33272 = VERTEX_POINT('',#33273); +#33273 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#33274 = LINE('',#33275,#33276); +#33275 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#33276 = VECTOR('',#33277,1.); +#33277 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33278 = ORIENTED_EDGE('',*,*,#33279,.T.); +#33279 = EDGE_CURVE('',#33272,#33280,#33282,.T.); +#33280 = VERTEX_POINT('',#33281); +#33281 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33282 = LINE('',#33283,#33284); +#33283 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#33284 = VECTOR('',#33285,1.); +#33285 = DIRECTION('',(0.,0.,1.)); +#33286 = ORIENTED_EDGE('',*,*,#33287,.T.); +#33287 = EDGE_CURVE('',#33280,#28422,#33288,.T.); +#33288 = LINE('',#33289,#33290); +#33289 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33290 = VECTOR('',#33291,1.); +#33291 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33292 = ORIENTED_EDGE('',*,*,#28429,.F.); +#33293 = ORIENTED_EDGE('',*,*,#33238,.T.); +#33294 = PLANE('',#33295); +#33295 = AXIS2_PLACEMENT_3D('',#33296,#33297,#33298); +#33296 = CARTESIAN_POINT('',(-0.1,-27.94,3.911477598424)); +#33297 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33298 = DIRECTION('',(0.,0.,1.)); +#33299 = ADVANCED_FACE('',(#33300),#33318,.T.); +#33300 = FACE_BOUND('',#33301,.T.); +#33301 = EDGE_LOOP('',(#33302,#33310,#33316,#33317)); +#33302 = ORIENTED_EDGE('',*,*,#33303,.T.); +#33303 = EDGE_CURVE('',#33280,#33304,#33306,.T.); +#33304 = VERTEX_POINT('',#33305); +#33305 = CARTESIAN_POINT('',(0.1,-27.69,7.35)); +#33306 = LINE('',#33307,#33308); +#33307 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33308 = VECTOR('',#33309,1.); +#33309 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33310 = ORIENTED_EDGE('',*,*,#33311,.T.); +#33311 = EDGE_CURVE('',#33304,#28414,#33312,.T.); +#33312 = LINE('',#33313,#33314); +#33313 = CARTESIAN_POINT('',(0.1,-27.69,7.35)); +#33314 = VECTOR('',#33315,1.); +#33315 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33316 = ORIENTED_EDGE('',*,*,#28421,.F.); +#33317 = ORIENTED_EDGE('',*,*,#33287,.F.); +#33318 = PLANE('',#33319); +#33319 = AXIS2_PLACEMENT_3D('',#33320,#33321,#33322); +#33320 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33321 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33322 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33323 = ADVANCED_FACE('',(#33324),#33360,.F.); +#33324 = FACE_BOUND('',#33325,.F.); +#33325 = EDGE_LOOP('',(#33326,#33327,#33335,#33343,#33351,#33357,#33358, + #33359)); +#33326 = ORIENTED_EDGE('',*,*,#28509,.F.); +#33327 = ORIENTED_EDGE('',*,*,#33328,.T.); +#33328 = EDGE_CURVE('',#28502,#33329,#33331,.T.); +#33329 = VERTEX_POINT('',#33330); +#33330 = CARTESIAN_POINT('',(0.1,-28.19,7.35)); +#33331 = LINE('',#33332,#33333); +#33332 = CARTESIAN_POINT('',(0.1,-28.24,7.4)); +#33333 = VECTOR('',#33334,1.); +#33334 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33335 = ORIENTED_EDGE('',*,*,#33336,.T.); +#33336 = EDGE_CURVE('',#33329,#33337,#33339,.T.); +#33337 = VERTEX_POINT('',#33338); +#33338 = CARTESIAN_POINT('',(0.1,-28.19,1.25)); +#33339 = LINE('',#33340,#33341); +#33340 = CARTESIAN_POINT('',(0.1,-28.19,7.35)); +#33341 = VECTOR('',#33342,1.); +#33342 = DIRECTION('',(0.,0.,-1.)); +#33343 = ORIENTED_EDGE('',*,*,#33344,.T.); +#33344 = EDGE_CURVE('',#33337,#33345,#33347,.T.); +#33345 = VERTEX_POINT('',#33346); +#33346 = CARTESIAN_POINT('',(0.1,-27.69,1.25)); +#33347 = LINE('',#33348,#33349); +#33348 = CARTESIAN_POINT('',(0.1,-28.19,1.25)); +#33349 = VECTOR('',#33350,1.); +#33350 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33351 = ORIENTED_EDGE('',*,*,#33352,.T.); +#33352 = EDGE_CURVE('',#33345,#33304,#33353,.T.); +#33353 = LINE('',#33354,#33355); +#33354 = CARTESIAN_POINT('',(0.1,-27.69,1.25)); +#33355 = VECTOR('',#33356,1.); +#33356 = DIRECTION('',(0.,0.,1.)); +#33357 = ORIENTED_EDGE('',*,*,#33311,.T.); +#33358 = ORIENTED_EDGE('',*,*,#28413,.F.); +#33359 = ORIENTED_EDGE('',*,*,#33223,.T.); +#33360 = PLANE('',#33361); +#33361 = AXIS2_PLACEMENT_3D('',#33362,#33363,#33364); +#33362 = CARTESIAN_POINT('',(0.1,-27.94,3.911477598424)); +#33363 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33364 = DIRECTION('',(0.,0.,1.)); +#33365 = ADVANCED_FACE('',(#33366),#33377,.T.); +#33366 = FACE_BOUND('',#33367,.T.); +#33367 = EDGE_LOOP('',(#33368,#33369,#33370,#33376)); +#33368 = ORIENTED_EDGE('',*,*,#28501,.T.); +#33369 = ORIENTED_EDGE('',*,*,#33328,.T.); +#33370 = ORIENTED_EDGE('',*,*,#33371,.F.); +#33371 = EDGE_CURVE('',#33256,#33329,#33372,.T.); +#33372 = LINE('',#33373,#33374); +#33373 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#33374 = VECTOR('',#33375,1.); +#33375 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33376 = ORIENTED_EDGE('',*,*,#33255,.F.); +#33377 = PLANE('',#33378); +#33378 = AXIS2_PLACEMENT_3D('',#33379,#33380,#33381); +#33379 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#33380 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33381 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33382 = ADVANCED_FACE('',(#33383),#33394,.T.); +#33383 = FACE_BOUND('',#33384,.T.); +#33384 = EDGE_LOOP('',(#33385,#33386,#33387,#33388)); +#33385 = ORIENTED_EDGE('',*,*,#28677,.T.); +#33386 = ORIENTED_EDGE('',*,*,#28540,.T.); +#33387 = ORIENTED_EDGE('',*,*,#28565,.T.); +#33388 = ORIENTED_EDGE('',*,*,#33389,.T.); +#33389 = EDGE_CURVE('',#28566,#28670,#33390,.T.); +#33390 = LINE('',#33391,#33392); +#33391 = CARTESIAN_POINT('',(0.1,-25.4,0.9)); +#33392 = VECTOR('',#33393,1.); +#33393 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33394 = PLANE('',#33395); +#33395 = AXIS2_PLACEMENT_3D('',#33396,#33397,#33398); +#33396 = CARTESIAN_POINT('',(-2.913641550251E-15,-25.4,0.9)); +#33397 = DIRECTION('',(0.,0.,1.)); +#33398 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33399 = ADVANCED_FACE('',(#33400),#33411,.T.); +#33400 = FACE_BOUND('',#33401,.T.); +#33401 = EDGE_LOOP('',(#33402,#33403,#33409,#33410)); +#33402 = ORIENTED_EDGE('',*,*,#28645,.T.); +#33403 = ORIENTED_EDGE('',*,*,#33404,.F.); +#33404 = EDGE_CURVE('',#28590,#28646,#33405,.T.); +#33405 = LINE('',#33406,#33407); +#33406 = CARTESIAN_POINT('',(-0.1,-25.4,0.9)); +#33407 = VECTOR('',#33408,1.); +#33408 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33409 = ORIENTED_EDGE('',*,*,#28597,.T.); +#33410 = ORIENTED_EDGE('',*,*,#28620,.T.); +#33411 = PLANE('',#33412); +#33412 = AXIS2_PLACEMENT_3D('',#33413,#33414,#33415); +#33413 = CARTESIAN_POINT('',(-2.913641550251E-15,-25.4,0.9)); +#33414 = DIRECTION('',(0.,0.,1.)); +#33415 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33416 = ADVANCED_FACE('',(#33417),#33460,.T.); +#33417 = FACE_BOUND('',#33418,.T.); +#33418 = EDGE_LOOP('',(#33419,#33420,#33428,#33436,#33444,#33452,#33458, + #33459)); +#33419 = ORIENTED_EDGE('',*,*,#28653,.F.); +#33420 = ORIENTED_EDGE('',*,*,#33421,.T.); +#33421 = EDGE_CURVE('',#28654,#33422,#33424,.T.); +#33422 = VERTEX_POINT('',#33423); +#33423 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#33424 = LINE('',#33425,#33426); +#33425 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#33426 = VECTOR('',#33427,1.); +#33427 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33428 = ORIENTED_EDGE('',*,*,#33429,.T.); +#33429 = EDGE_CURVE('',#33422,#33430,#33432,.T.); +#33430 = VERTEX_POINT('',#33431); +#33431 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#33432 = LINE('',#33433,#33434); +#33433 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#33434 = VECTOR('',#33435,1.); +#33435 = DIRECTION('',(0.,0.,-1.)); +#33436 = ORIENTED_EDGE('',*,*,#33437,.T.); +#33437 = EDGE_CURVE('',#33430,#33438,#33440,.T.); +#33438 = VERTEX_POINT('',#33439); +#33439 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#33440 = LINE('',#33441,#33442); +#33441 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#33442 = VECTOR('',#33443,1.); +#33443 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33444 = ORIENTED_EDGE('',*,*,#33445,.T.); +#33445 = EDGE_CURVE('',#33438,#33446,#33448,.T.); +#33446 = VERTEX_POINT('',#33447); +#33447 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33448 = LINE('',#33449,#33450); +#33449 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#33450 = VECTOR('',#33451,1.); +#33451 = DIRECTION('',(0.,0.,1.)); +#33452 = ORIENTED_EDGE('',*,*,#33453,.T.); +#33453 = EDGE_CURVE('',#33446,#28582,#33454,.T.); +#33454 = LINE('',#33455,#33456); +#33455 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33456 = VECTOR('',#33457,1.); +#33457 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33458 = ORIENTED_EDGE('',*,*,#28589,.F.); +#33459 = ORIENTED_EDGE('',*,*,#33404,.T.); +#33460 = PLANE('',#33461); +#33461 = AXIS2_PLACEMENT_3D('',#33462,#33463,#33464); +#33462 = CARTESIAN_POINT('',(-0.1,-25.4,3.911477598424)); +#33463 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33464 = DIRECTION('',(0.,0.,1.)); +#33465 = ADVANCED_FACE('',(#33466),#33484,.T.); +#33466 = FACE_BOUND('',#33467,.T.); +#33467 = EDGE_LOOP('',(#33468,#33476,#33482,#33483)); +#33468 = ORIENTED_EDGE('',*,*,#33469,.T.); +#33469 = EDGE_CURVE('',#33446,#33470,#33472,.T.); +#33470 = VERTEX_POINT('',#33471); +#33471 = CARTESIAN_POINT('',(0.1,-25.15,7.35)); +#33472 = LINE('',#33473,#33474); +#33473 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33474 = VECTOR('',#33475,1.); +#33475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33476 = ORIENTED_EDGE('',*,*,#33477,.T.); +#33477 = EDGE_CURVE('',#33470,#28574,#33478,.T.); +#33478 = LINE('',#33479,#33480); +#33479 = CARTESIAN_POINT('',(0.1,-25.15,7.35)); +#33480 = VECTOR('',#33481,1.); +#33481 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33482 = ORIENTED_EDGE('',*,*,#28581,.F.); +#33483 = ORIENTED_EDGE('',*,*,#33453,.F.); +#33484 = PLANE('',#33485); +#33485 = AXIS2_PLACEMENT_3D('',#33486,#33487,#33488); +#33486 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33487 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33488 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33489 = ADVANCED_FACE('',(#33490),#33526,.F.); +#33490 = FACE_BOUND('',#33491,.F.); +#33491 = EDGE_LOOP('',(#33492,#33493,#33501,#33509,#33517,#33523,#33524, + #33525)); +#33492 = ORIENTED_EDGE('',*,*,#28669,.F.); +#33493 = ORIENTED_EDGE('',*,*,#33494,.T.); +#33494 = EDGE_CURVE('',#28662,#33495,#33497,.T.); +#33495 = VERTEX_POINT('',#33496); +#33496 = CARTESIAN_POINT('',(0.1,-25.65,7.35)); +#33497 = LINE('',#33498,#33499); +#33498 = CARTESIAN_POINT('',(0.1,-25.7,7.4)); +#33499 = VECTOR('',#33500,1.); +#33500 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33501 = ORIENTED_EDGE('',*,*,#33502,.T.); +#33502 = EDGE_CURVE('',#33495,#33503,#33505,.T.); +#33503 = VERTEX_POINT('',#33504); +#33504 = CARTESIAN_POINT('',(0.1,-25.65,1.25)); +#33505 = LINE('',#33506,#33507); +#33506 = CARTESIAN_POINT('',(0.1,-25.65,7.35)); +#33507 = VECTOR('',#33508,1.); +#33508 = DIRECTION('',(0.,0.,-1.)); +#33509 = ORIENTED_EDGE('',*,*,#33510,.T.); +#33510 = EDGE_CURVE('',#33503,#33511,#33513,.T.); +#33511 = VERTEX_POINT('',#33512); +#33512 = CARTESIAN_POINT('',(0.1,-25.15,1.25)); +#33513 = LINE('',#33514,#33515); +#33514 = CARTESIAN_POINT('',(0.1,-25.65,1.25)); +#33515 = VECTOR('',#33516,1.); +#33516 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33517 = ORIENTED_EDGE('',*,*,#33518,.T.); +#33518 = EDGE_CURVE('',#33511,#33470,#33519,.T.); +#33519 = LINE('',#33520,#33521); +#33520 = CARTESIAN_POINT('',(0.1,-25.15,1.25)); +#33521 = VECTOR('',#33522,1.); +#33522 = DIRECTION('',(0.,0.,1.)); +#33523 = ORIENTED_EDGE('',*,*,#33477,.T.); +#33524 = ORIENTED_EDGE('',*,*,#28573,.F.); +#33525 = ORIENTED_EDGE('',*,*,#33389,.T.); +#33526 = PLANE('',#33527); +#33527 = AXIS2_PLACEMENT_3D('',#33528,#33529,#33530); +#33528 = CARTESIAN_POINT('',(0.1,-25.4,3.911477598424)); +#33529 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33530 = DIRECTION('',(0.,0.,1.)); +#33531 = ADVANCED_FACE('',(#33532),#33543,.T.); +#33532 = FACE_BOUND('',#33533,.T.); +#33533 = EDGE_LOOP('',(#33534,#33535,#33536,#33542)); +#33534 = ORIENTED_EDGE('',*,*,#28661,.T.); +#33535 = ORIENTED_EDGE('',*,*,#33494,.T.); +#33536 = ORIENTED_EDGE('',*,*,#33537,.F.); +#33537 = EDGE_CURVE('',#33422,#33495,#33538,.T.); +#33538 = LINE('',#33539,#33540); +#33539 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#33540 = VECTOR('',#33541,1.); +#33541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33542 = ORIENTED_EDGE('',*,*,#33421,.F.); +#33543 = PLANE('',#33544); +#33544 = AXIS2_PLACEMENT_3D('',#33545,#33546,#33547); +#33545 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#33546 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33547 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33548 = ADVANCED_FACE('',(#33549),#33560,.T.); +#33549 = FACE_BOUND('',#33550,.T.); +#33550 = EDGE_LOOP('',(#33551,#33552,#33553,#33554)); +#33551 = ORIENTED_EDGE('',*,*,#28837,.T.); +#33552 = ORIENTED_EDGE('',*,*,#28700,.T.); +#33553 = ORIENTED_EDGE('',*,*,#28725,.T.); +#33554 = ORIENTED_EDGE('',*,*,#33555,.T.); +#33555 = EDGE_CURVE('',#28726,#28830,#33556,.T.); +#33556 = LINE('',#33557,#33558); +#33557 = CARTESIAN_POINT('',(0.1,-22.86,0.9)); +#33558 = VECTOR('',#33559,1.); +#33559 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33560 = PLANE('',#33561); +#33561 = AXIS2_PLACEMENT_3D('',#33562,#33563,#33564); +#33562 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#33563 = DIRECTION('',(0.,0.,1.)); +#33564 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33565 = ADVANCED_FACE('',(#33566),#33577,.T.); +#33566 = FACE_BOUND('',#33567,.T.); +#33567 = EDGE_LOOP('',(#33568,#33569,#33575,#33576)); +#33568 = ORIENTED_EDGE('',*,*,#28805,.T.); +#33569 = ORIENTED_EDGE('',*,*,#33570,.F.); +#33570 = EDGE_CURVE('',#28750,#28806,#33571,.T.); +#33571 = LINE('',#33572,#33573); +#33572 = CARTESIAN_POINT('',(-0.1,-22.86,0.9)); +#33573 = VECTOR('',#33574,1.); +#33574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33575 = ORIENTED_EDGE('',*,*,#28757,.T.); +#33576 = ORIENTED_EDGE('',*,*,#28780,.T.); +#33577 = PLANE('',#33578); +#33578 = AXIS2_PLACEMENT_3D('',#33579,#33580,#33581); +#33579 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#33580 = DIRECTION('',(0.,0.,1.)); +#33581 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33582 = ADVANCED_FACE('',(#33583),#33626,.T.); +#33583 = FACE_BOUND('',#33584,.T.); +#33584 = EDGE_LOOP('',(#33585,#33586,#33594,#33602,#33610,#33618,#33624, + #33625)); +#33585 = ORIENTED_EDGE('',*,*,#28813,.F.); +#33586 = ORIENTED_EDGE('',*,*,#33587,.T.); +#33587 = EDGE_CURVE('',#28814,#33588,#33590,.T.); +#33588 = VERTEX_POINT('',#33589); +#33589 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#33590 = LINE('',#33591,#33592); +#33591 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#33592 = VECTOR('',#33593,1.); +#33593 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33594 = ORIENTED_EDGE('',*,*,#33595,.T.); +#33595 = EDGE_CURVE('',#33588,#33596,#33598,.T.); +#33596 = VERTEX_POINT('',#33597); +#33597 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#33598 = LINE('',#33599,#33600); +#33599 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#33600 = VECTOR('',#33601,1.); +#33601 = DIRECTION('',(0.,0.,-1.)); +#33602 = ORIENTED_EDGE('',*,*,#33603,.T.); +#33603 = EDGE_CURVE('',#33596,#33604,#33606,.T.); +#33604 = VERTEX_POINT('',#33605); +#33605 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#33606 = LINE('',#33607,#33608); +#33607 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#33608 = VECTOR('',#33609,1.); +#33609 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33610 = ORIENTED_EDGE('',*,*,#33611,.T.); +#33611 = EDGE_CURVE('',#33604,#33612,#33614,.T.); +#33612 = VERTEX_POINT('',#33613); +#33613 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33614 = LINE('',#33615,#33616); +#33615 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#33616 = VECTOR('',#33617,1.); +#33617 = DIRECTION('',(0.,0.,1.)); +#33618 = ORIENTED_EDGE('',*,*,#33619,.T.); +#33619 = EDGE_CURVE('',#33612,#28742,#33620,.T.); +#33620 = LINE('',#33621,#33622); +#33621 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33622 = VECTOR('',#33623,1.); +#33623 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33624 = ORIENTED_EDGE('',*,*,#28749,.F.); +#33625 = ORIENTED_EDGE('',*,*,#33570,.T.); +#33626 = PLANE('',#33627); +#33627 = AXIS2_PLACEMENT_3D('',#33628,#33629,#33630); +#33628 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#33629 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33630 = DIRECTION('',(0.,0.,1.)); +#33631 = ADVANCED_FACE('',(#33632),#33650,.T.); +#33632 = FACE_BOUND('',#33633,.T.); +#33633 = EDGE_LOOP('',(#33634,#33642,#33648,#33649)); +#33634 = ORIENTED_EDGE('',*,*,#33635,.T.); +#33635 = EDGE_CURVE('',#33612,#33636,#33638,.T.); +#33636 = VERTEX_POINT('',#33637); +#33637 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#33638 = LINE('',#33639,#33640); +#33639 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33640 = VECTOR('',#33641,1.); +#33641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33642 = ORIENTED_EDGE('',*,*,#33643,.T.); +#33643 = EDGE_CURVE('',#33636,#28734,#33644,.T.); +#33644 = LINE('',#33645,#33646); +#33645 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#33646 = VECTOR('',#33647,1.); +#33647 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33648 = ORIENTED_EDGE('',*,*,#28741,.F.); +#33649 = ORIENTED_EDGE('',*,*,#33619,.F.); +#33650 = PLANE('',#33651); +#33651 = AXIS2_PLACEMENT_3D('',#33652,#33653,#33654); +#33652 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33653 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33654 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33655 = ADVANCED_FACE('',(#33656),#33692,.F.); +#33656 = FACE_BOUND('',#33657,.F.); +#33657 = EDGE_LOOP('',(#33658,#33659,#33667,#33675,#33683,#33689,#33690, + #33691)); +#33658 = ORIENTED_EDGE('',*,*,#28829,.F.); +#33659 = ORIENTED_EDGE('',*,*,#33660,.T.); +#33660 = EDGE_CURVE('',#28822,#33661,#33663,.T.); +#33661 = VERTEX_POINT('',#33662); +#33662 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#33663 = LINE('',#33664,#33665); +#33664 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#33665 = VECTOR('',#33666,1.); +#33666 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33667 = ORIENTED_EDGE('',*,*,#33668,.T.); +#33668 = EDGE_CURVE('',#33661,#33669,#33671,.T.); +#33669 = VERTEX_POINT('',#33670); +#33670 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#33671 = LINE('',#33672,#33673); +#33672 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#33673 = VECTOR('',#33674,1.); +#33674 = DIRECTION('',(0.,0.,-1.)); +#33675 = ORIENTED_EDGE('',*,*,#33676,.T.); +#33676 = EDGE_CURVE('',#33669,#33677,#33679,.T.); +#33677 = VERTEX_POINT('',#33678); +#33678 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#33679 = LINE('',#33680,#33681); +#33680 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#33681 = VECTOR('',#33682,1.); +#33682 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33683 = ORIENTED_EDGE('',*,*,#33684,.T.); +#33684 = EDGE_CURVE('',#33677,#33636,#33685,.T.); +#33685 = LINE('',#33686,#33687); +#33686 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#33687 = VECTOR('',#33688,1.); +#33688 = DIRECTION('',(0.,0.,1.)); +#33689 = ORIENTED_EDGE('',*,*,#33643,.T.); +#33690 = ORIENTED_EDGE('',*,*,#28733,.F.); +#33691 = ORIENTED_EDGE('',*,*,#33555,.T.); +#33692 = PLANE('',#33693); +#33693 = AXIS2_PLACEMENT_3D('',#33694,#33695,#33696); +#33694 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#33695 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33696 = DIRECTION('',(0.,0.,1.)); +#33697 = ADVANCED_FACE('',(#33698),#33709,.T.); +#33698 = FACE_BOUND('',#33699,.T.); +#33699 = EDGE_LOOP('',(#33700,#33701,#33702,#33708)); +#33700 = ORIENTED_EDGE('',*,*,#28821,.T.); +#33701 = ORIENTED_EDGE('',*,*,#33660,.T.); +#33702 = ORIENTED_EDGE('',*,*,#33703,.F.); +#33703 = EDGE_CURVE('',#33588,#33661,#33704,.T.); +#33704 = LINE('',#33705,#33706); +#33705 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#33706 = VECTOR('',#33707,1.); +#33707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33708 = ORIENTED_EDGE('',*,*,#33587,.F.); +#33709 = PLANE('',#33710); +#33710 = AXIS2_PLACEMENT_3D('',#33711,#33712,#33713); +#33711 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#33712 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33713 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33714 = ADVANCED_FACE('',(#33715),#33726,.T.); +#33715 = FACE_BOUND('',#33716,.T.); +#33716 = EDGE_LOOP('',(#33717,#33718,#33719,#33720)); +#33717 = ORIENTED_EDGE('',*,*,#28997,.T.); +#33718 = ORIENTED_EDGE('',*,*,#28860,.T.); +#33719 = ORIENTED_EDGE('',*,*,#28885,.T.); +#33720 = ORIENTED_EDGE('',*,*,#33721,.T.); +#33721 = EDGE_CURVE('',#28886,#28990,#33722,.T.); +#33722 = LINE('',#33723,#33724); +#33723 = CARTESIAN_POINT('',(0.1,-20.32,0.9)); +#33724 = VECTOR('',#33725,1.); +#33725 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33726 = PLANE('',#33727); +#33727 = AXIS2_PLACEMENT_3D('',#33728,#33729,#33730); +#33728 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#33729 = DIRECTION('',(0.,0.,1.)); +#33730 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33731 = ADVANCED_FACE('',(#33732),#33743,.T.); +#33732 = FACE_BOUND('',#33733,.T.); +#33733 = EDGE_LOOP('',(#33734,#33735,#33741,#33742)); +#33734 = ORIENTED_EDGE('',*,*,#28965,.T.); +#33735 = ORIENTED_EDGE('',*,*,#33736,.F.); +#33736 = EDGE_CURVE('',#28910,#28966,#33737,.T.); +#33737 = LINE('',#33738,#33739); +#33738 = CARTESIAN_POINT('',(-0.1,-20.32,0.9)); +#33739 = VECTOR('',#33740,1.); +#33740 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33741 = ORIENTED_EDGE('',*,*,#28917,.T.); +#33742 = ORIENTED_EDGE('',*,*,#28940,.T.); +#33743 = PLANE('',#33744); +#33744 = AXIS2_PLACEMENT_3D('',#33745,#33746,#33747); +#33745 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#33746 = DIRECTION('',(0.,0.,1.)); +#33747 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33748 = ADVANCED_FACE('',(#33749),#33792,.T.); +#33749 = FACE_BOUND('',#33750,.T.); +#33750 = EDGE_LOOP('',(#33751,#33752,#33760,#33768,#33776,#33784,#33790, + #33791)); +#33751 = ORIENTED_EDGE('',*,*,#28973,.F.); +#33752 = ORIENTED_EDGE('',*,*,#33753,.T.); +#33753 = EDGE_CURVE('',#28974,#33754,#33756,.T.); +#33754 = VERTEX_POINT('',#33755); +#33755 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#33756 = LINE('',#33757,#33758); +#33757 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#33758 = VECTOR('',#33759,1.); +#33759 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33760 = ORIENTED_EDGE('',*,*,#33761,.T.); +#33761 = EDGE_CURVE('',#33754,#33762,#33764,.T.); +#33762 = VERTEX_POINT('',#33763); +#33763 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#33764 = LINE('',#33765,#33766); +#33765 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#33766 = VECTOR('',#33767,1.); +#33767 = DIRECTION('',(0.,0.,-1.)); +#33768 = ORIENTED_EDGE('',*,*,#33769,.T.); +#33769 = EDGE_CURVE('',#33762,#33770,#33772,.T.); +#33770 = VERTEX_POINT('',#33771); +#33771 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#33772 = LINE('',#33773,#33774); +#33773 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#33774 = VECTOR('',#33775,1.); +#33775 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33776 = ORIENTED_EDGE('',*,*,#33777,.T.); +#33777 = EDGE_CURVE('',#33770,#33778,#33780,.T.); +#33778 = VERTEX_POINT('',#33779); +#33779 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33780 = LINE('',#33781,#33782); +#33781 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#33782 = VECTOR('',#33783,1.); +#33783 = DIRECTION('',(0.,0.,1.)); +#33784 = ORIENTED_EDGE('',*,*,#33785,.T.); +#33785 = EDGE_CURVE('',#33778,#28902,#33786,.T.); +#33786 = LINE('',#33787,#33788); +#33787 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33788 = VECTOR('',#33789,1.); +#33789 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33790 = ORIENTED_EDGE('',*,*,#28909,.F.); +#33791 = ORIENTED_EDGE('',*,*,#33736,.T.); +#33792 = PLANE('',#33793); +#33793 = AXIS2_PLACEMENT_3D('',#33794,#33795,#33796); +#33794 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#33795 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33796 = DIRECTION('',(0.,0.,1.)); +#33797 = ADVANCED_FACE('',(#33798),#33816,.T.); +#33798 = FACE_BOUND('',#33799,.T.); +#33799 = EDGE_LOOP('',(#33800,#33808,#33814,#33815)); +#33800 = ORIENTED_EDGE('',*,*,#33801,.T.); +#33801 = EDGE_CURVE('',#33778,#33802,#33804,.T.); +#33802 = VERTEX_POINT('',#33803); +#33803 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#33804 = LINE('',#33805,#33806); +#33805 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33806 = VECTOR('',#33807,1.); +#33807 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33808 = ORIENTED_EDGE('',*,*,#33809,.T.); +#33809 = EDGE_CURVE('',#33802,#28894,#33810,.T.); +#33810 = LINE('',#33811,#33812); +#33811 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#33812 = VECTOR('',#33813,1.); +#33813 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33814 = ORIENTED_EDGE('',*,*,#28901,.F.); +#33815 = ORIENTED_EDGE('',*,*,#33785,.F.); +#33816 = PLANE('',#33817); +#33817 = AXIS2_PLACEMENT_3D('',#33818,#33819,#33820); +#33818 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33819 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33820 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33821 = ADVANCED_FACE('',(#33822),#33858,.F.); +#33822 = FACE_BOUND('',#33823,.F.); +#33823 = EDGE_LOOP('',(#33824,#33825,#33833,#33841,#33849,#33855,#33856, + #33857)); +#33824 = ORIENTED_EDGE('',*,*,#28989,.F.); +#33825 = ORIENTED_EDGE('',*,*,#33826,.T.); +#33826 = EDGE_CURVE('',#28982,#33827,#33829,.T.); +#33827 = VERTEX_POINT('',#33828); +#33828 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#33829 = LINE('',#33830,#33831); +#33830 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#33831 = VECTOR('',#33832,1.); +#33832 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33833 = ORIENTED_EDGE('',*,*,#33834,.T.); +#33834 = EDGE_CURVE('',#33827,#33835,#33837,.T.); +#33835 = VERTEX_POINT('',#33836); +#33836 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#33837 = LINE('',#33838,#33839); +#33838 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#33839 = VECTOR('',#33840,1.); +#33840 = DIRECTION('',(0.,0.,-1.)); +#33841 = ORIENTED_EDGE('',*,*,#33842,.T.); +#33842 = EDGE_CURVE('',#33835,#33843,#33845,.T.); +#33843 = VERTEX_POINT('',#33844); +#33844 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#33845 = LINE('',#33846,#33847); +#33846 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#33847 = VECTOR('',#33848,1.); +#33848 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33849 = ORIENTED_EDGE('',*,*,#33850,.T.); +#33850 = EDGE_CURVE('',#33843,#33802,#33851,.T.); +#33851 = LINE('',#33852,#33853); +#33852 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#33853 = VECTOR('',#33854,1.); +#33854 = DIRECTION('',(0.,0.,1.)); +#33855 = ORIENTED_EDGE('',*,*,#33809,.T.); +#33856 = ORIENTED_EDGE('',*,*,#28893,.F.); +#33857 = ORIENTED_EDGE('',*,*,#33721,.T.); +#33858 = PLANE('',#33859); +#33859 = AXIS2_PLACEMENT_3D('',#33860,#33861,#33862); +#33860 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#33861 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33862 = DIRECTION('',(0.,0.,1.)); +#33863 = ADVANCED_FACE('',(#33864),#33875,.T.); +#33864 = FACE_BOUND('',#33865,.T.); +#33865 = EDGE_LOOP('',(#33866,#33867,#33868,#33874)); +#33866 = ORIENTED_EDGE('',*,*,#28981,.T.); +#33867 = ORIENTED_EDGE('',*,*,#33826,.T.); +#33868 = ORIENTED_EDGE('',*,*,#33869,.F.); +#33869 = EDGE_CURVE('',#33754,#33827,#33870,.T.); +#33870 = LINE('',#33871,#33872); +#33871 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#33872 = VECTOR('',#33873,1.); +#33873 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33874 = ORIENTED_EDGE('',*,*,#33753,.F.); +#33875 = PLANE('',#33876); +#33876 = AXIS2_PLACEMENT_3D('',#33877,#33878,#33879); +#33877 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#33878 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33879 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33880 = ADVANCED_FACE('',(#33881),#33892,.T.); +#33881 = FACE_BOUND('',#33882,.T.); +#33882 = EDGE_LOOP('',(#33883,#33884,#33885,#33886)); +#33883 = ORIENTED_EDGE('',*,*,#29157,.T.); +#33884 = ORIENTED_EDGE('',*,*,#29020,.T.); +#33885 = ORIENTED_EDGE('',*,*,#29045,.T.); +#33886 = ORIENTED_EDGE('',*,*,#33887,.T.); +#33887 = EDGE_CURVE('',#29046,#29150,#33888,.T.); +#33888 = LINE('',#33889,#33890); +#33889 = CARTESIAN_POINT('',(0.1,-17.78,0.9)); +#33890 = VECTOR('',#33891,1.); +#33891 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33892 = PLANE('',#33893); +#33893 = AXIS2_PLACEMENT_3D('',#33894,#33895,#33896); +#33894 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#33895 = DIRECTION('',(0.,0.,1.)); +#33896 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33897 = ADVANCED_FACE('',(#33898),#33909,.T.); +#33898 = FACE_BOUND('',#33899,.T.); +#33899 = EDGE_LOOP('',(#33900,#33901,#33907,#33908)); +#33900 = ORIENTED_EDGE('',*,*,#29125,.T.); +#33901 = ORIENTED_EDGE('',*,*,#33902,.F.); +#33902 = EDGE_CURVE('',#29070,#29126,#33903,.T.); +#33903 = LINE('',#33904,#33905); +#33904 = CARTESIAN_POINT('',(-0.1,-17.78,0.9)); +#33905 = VECTOR('',#33906,1.); +#33906 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33907 = ORIENTED_EDGE('',*,*,#29077,.T.); +#33908 = ORIENTED_EDGE('',*,*,#29100,.T.); +#33909 = PLANE('',#33910); +#33910 = AXIS2_PLACEMENT_3D('',#33911,#33912,#33913); +#33911 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#33912 = DIRECTION('',(0.,0.,1.)); +#33913 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33914 = ADVANCED_FACE('',(#33915),#33958,.T.); +#33915 = FACE_BOUND('',#33916,.T.); +#33916 = EDGE_LOOP('',(#33917,#33918,#33926,#33934,#33942,#33950,#33956, + #33957)); +#33917 = ORIENTED_EDGE('',*,*,#29133,.F.); +#33918 = ORIENTED_EDGE('',*,*,#33919,.T.); +#33919 = EDGE_CURVE('',#29134,#33920,#33922,.T.); +#33920 = VERTEX_POINT('',#33921); +#33921 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#33922 = LINE('',#33923,#33924); +#33923 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#33924 = VECTOR('',#33925,1.); +#33925 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33926 = ORIENTED_EDGE('',*,*,#33927,.T.); +#33927 = EDGE_CURVE('',#33920,#33928,#33930,.T.); +#33928 = VERTEX_POINT('',#33929); +#33929 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#33930 = LINE('',#33931,#33932); +#33931 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#33932 = VECTOR('',#33933,1.); +#33933 = DIRECTION('',(0.,0.,-1.)); +#33934 = ORIENTED_EDGE('',*,*,#33935,.T.); +#33935 = EDGE_CURVE('',#33928,#33936,#33938,.T.); +#33936 = VERTEX_POINT('',#33937); +#33937 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#33938 = LINE('',#33939,#33940); +#33939 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#33940 = VECTOR('',#33941,1.); +#33941 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33942 = ORIENTED_EDGE('',*,*,#33943,.T.); +#33943 = EDGE_CURVE('',#33936,#33944,#33946,.T.); +#33944 = VERTEX_POINT('',#33945); +#33945 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33946 = LINE('',#33947,#33948); +#33947 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#33948 = VECTOR('',#33949,1.); +#33949 = DIRECTION('',(0.,0.,1.)); +#33950 = ORIENTED_EDGE('',*,*,#33951,.T.); +#33951 = EDGE_CURVE('',#33944,#29062,#33952,.T.); +#33952 = LINE('',#33953,#33954); +#33953 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33954 = VECTOR('',#33955,1.); +#33955 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33956 = ORIENTED_EDGE('',*,*,#29069,.F.); +#33957 = ORIENTED_EDGE('',*,*,#33902,.T.); +#33958 = PLANE('',#33959); +#33959 = AXIS2_PLACEMENT_3D('',#33960,#33961,#33962); +#33960 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#33961 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33962 = DIRECTION('',(0.,0.,1.)); +#33963 = ADVANCED_FACE('',(#33964),#33982,.T.); +#33964 = FACE_BOUND('',#33965,.T.); +#33965 = EDGE_LOOP('',(#33966,#33974,#33980,#33981)); +#33966 = ORIENTED_EDGE('',*,*,#33967,.T.); +#33967 = EDGE_CURVE('',#33944,#33968,#33970,.T.); +#33968 = VERTEX_POINT('',#33969); +#33969 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#33970 = LINE('',#33971,#33972); +#33971 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33972 = VECTOR('',#33973,1.); +#33973 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33974 = ORIENTED_EDGE('',*,*,#33975,.T.); +#33975 = EDGE_CURVE('',#33968,#29054,#33976,.T.); +#33976 = LINE('',#33977,#33978); +#33977 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#33978 = VECTOR('',#33979,1.); +#33979 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33980 = ORIENTED_EDGE('',*,*,#29061,.F.); +#33981 = ORIENTED_EDGE('',*,*,#33951,.F.); +#33982 = PLANE('',#33983); +#33983 = AXIS2_PLACEMENT_3D('',#33984,#33985,#33986); +#33984 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33985 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33986 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33987 = ADVANCED_FACE('',(#33988),#34024,.F.); +#33988 = FACE_BOUND('',#33989,.F.); +#33989 = EDGE_LOOP('',(#33990,#33991,#33999,#34007,#34015,#34021,#34022, + #34023)); +#33990 = ORIENTED_EDGE('',*,*,#29149,.F.); +#33991 = ORIENTED_EDGE('',*,*,#33992,.T.); +#33992 = EDGE_CURVE('',#29142,#33993,#33995,.T.); +#33993 = VERTEX_POINT('',#33994); +#33994 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#33995 = LINE('',#33996,#33997); +#33996 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#33997 = VECTOR('',#33998,1.); +#33998 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33999 = ORIENTED_EDGE('',*,*,#34000,.T.); +#34000 = EDGE_CURVE('',#33993,#34001,#34003,.T.); +#34001 = VERTEX_POINT('',#34002); +#34002 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#34003 = LINE('',#34004,#34005); +#34004 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#34005 = VECTOR('',#34006,1.); +#34006 = DIRECTION('',(0.,0.,-1.)); +#34007 = ORIENTED_EDGE('',*,*,#34008,.T.); +#34008 = EDGE_CURVE('',#34001,#34009,#34011,.T.); +#34009 = VERTEX_POINT('',#34010); +#34010 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#34011 = LINE('',#34012,#34013); +#34012 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#34013 = VECTOR('',#34014,1.); +#34014 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34015 = ORIENTED_EDGE('',*,*,#34016,.T.); +#34016 = EDGE_CURVE('',#34009,#33968,#34017,.T.); +#34017 = LINE('',#34018,#34019); +#34018 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#34019 = VECTOR('',#34020,1.); +#34020 = DIRECTION('',(0.,0.,1.)); +#34021 = ORIENTED_EDGE('',*,*,#33975,.T.); +#34022 = ORIENTED_EDGE('',*,*,#29053,.F.); +#34023 = ORIENTED_EDGE('',*,*,#33887,.T.); +#34024 = PLANE('',#34025); +#34025 = AXIS2_PLACEMENT_3D('',#34026,#34027,#34028); +#34026 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#34027 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34028 = DIRECTION('',(0.,0.,1.)); +#34029 = ADVANCED_FACE('',(#34030),#34041,.T.); +#34030 = FACE_BOUND('',#34031,.T.); +#34031 = EDGE_LOOP('',(#34032,#34033,#34034,#34040)); +#34032 = ORIENTED_EDGE('',*,*,#29141,.T.); +#34033 = ORIENTED_EDGE('',*,*,#33992,.T.); +#34034 = ORIENTED_EDGE('',*,*,#34035,.F.); +#34035 = EDGE_CURVE('',#33920,#33993,#34036,.T.); +#34036 = LINE('',#34037,#34038); +#34037 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#34038 = VECTOR('',#34039,1.); +#34039 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34040 = ORIENTED_EDGE('',*,*,#33919,.F.); +#34041 = PLANE('',#34042); +#34042 = AXIS2_PLACEMENT_3D('',#34043,#34044,#34045); +#34043 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#34044 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34045 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34046 = ADVANCED_FACE('',(#34047),#34058,.T.); +#34047 = FACE_BOUND('',#34048,.T.); +#34048 = EDGE_LOOP('',(#34049,#34050,#34051,#34052)); +#34049 = ORIENTED_EDGE('',*,*,#29317,.T.); +#34050 = ORIENTED_EDGE('',*,*,#29180,.T.); +#34051 = ORIENTED_EDGE('',*,*,#29205,.T.); +#34052 = ORIENTED_EDGE('',*,*,#34053,.T.); +#34053 = EDGE_CURVE('',#29206,#29310,#34054,.T.); +#34054 = LINE('',#34055,#34056); +#34055 = CARTESIAN_POINT('',(0.1,-15.24,0.9)); +#34056 = VECTOR('',#34057,1.); +#34057 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34058 = PLANE('',#34059); +#34059 = AXIS2_PLACEMENT_3D('',#34060,#34061,#34062); +#34060 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#34061 = DIRECTION('',(0.,0.,1.)); +#34062 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34063 = ADVANCED_FACE('',(#34064),#34075,.T.); +#34064 = FACE_BOUND('',#34065,.T.); +#34065 = EDGE_LOOP('',(#34066,#34067,#34073,#34074)); +#34066 = ORIENTED_EDGE('',*,*,#29285,.T.); +#34067 = ORIENTED_EDGE('',*,*,#34068,.F.); +#34068 = EDGE_CURVE('',#29230,#29286,#34069,.T.); +#34069 = LINE('',#34070,#34071); +#34070 = CARTESIAN_POINT('',(-0.1,-15.24,0.9)); +#34071 = VECTOR('',#34072,1.); +#34072 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34073 = ORIENTED_EDGE('',*,*,#29237,.T.); +#34074 = ORIENTED_EDGE('',*,*,#29260,.T.); +#34075 = PLANE('',#34076); +#34076 = AXIS2_PLACEMENT_3D('',#34077,#34078,#34079); +#34077 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#34078 = DIRECTION('',(0.,0.,1.)); +#34079 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34080 = ADVANCED_FACE('',(#34081),#34124,.T.); +#34081 = FACE_BOUND('',#34082,.T.); +#34082 = EDGE_LOOP('',(#34083,#34084,#34092,#34100,#34108,#34116,#34122, + #34123)); +#34083 = ORIENTED_EDGE('',*,*,#29293,.F.); +#34084 = ORIENTED_EDGE('',*,*,#34085,.T.); +#34085 = EDGE_CURVE('',#29294,#34086,#34088,.T.); +#34086 = VERTEX_POINT('',#34087); +#34087 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#34088 = LINE('',#34089,#34090); +#34089 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#34090 = VECTOR('',#34091,1.); +#34091 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34092 = ORIENTED_EDGE('',*,*,#34093,.T.); +#34093 = EDGE_CURVE('',#34086,#34094,#34096,.T.); +#34094 = VERTEX_POINT('',#34095); +#34095 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#34096 = LINE('',#34097,#34098); +#34097 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#34098 = VECTOR('',#34099,1.); +#34099 = DIRECTION('',(0.,0.,-1.)); +#34100 = ORIENTED_EDGE('',*,*,#34101,.T.); +#34101 = EDGE_CURVE('',#34094,#34102,#34104,.T.); +#34102 = VERTEX_POINT('',#34103); +#34103 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#34104 = LINE('',#34105,#34106); +#34105 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#34106 = VECTOR('',#34107,1.); +#34107 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34108 = ORIENTED_EDGE('',*,*,#34109,.T.); +#34109 = EDGE_CURVE('',#34102,#34110,#34112,.T.); +#34110 = VERTEX_POINT('',#34111); +#34111 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34112 = LINE('',#34113,#34114); +#34113 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#34114 = VECTOR('',#34115,1.); +#34115 = DIRECTION('',(0.,0.,1.)); +#34116 = ORIENTED_EDGE('',*,*,#34117,.T.); +#34117 = EDGE_CURVE('',#34110,#29222,#34118,.T.); +#34118 = LINE('',#34119,#34120); +#34119 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34120 = VECTOR('',#34121,1.); +#34121 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34122 = ORIENTED_EDGE('',*,*,#29229,.F.); +#34123 = ORIENTED_EDGE('',*,*,#34068,.T.); +#34124 = PLANE('',#34125); +#34125 = AXIS2_PLACEMENT_3D('',#34126,#34127,#34128); +#34126 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#34127 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34128 = DIRECTION('',(0.,0.,1.)); +#34129 = ADVANCED_FACE('',(#34130),#34148,.T.); +#34130 = FACE_BOUND('',#34131,.T.); +#34131 = EDGE_LOOP('',(#34132,#34140,#34146,#34147)); +#34132 = ORIENTED_EDGE('',*,*,#34133,.T.); +#34133 = EDGE_CURVE('',#34110,#34134,#34136,.T.); +#34134 = VERTEX_POINT('',#34135); +#34135 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#34136 = LINE('',#34137,#34138); +#34137 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34138 = VECTOR('',#34139,1.); +#34139 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34140 = ORIENTED_EDGE('',*,*,#34141,.T.); +#34141 = EDGE_CURVE('',#34134,#29214,#34142,.T.); +#34142 = LINE('',#34143,#34144); +#34143 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#34144 = VECTOR('',#34145,1.); +#34145 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34146 = ORIENTED_EDGE('',*,*,#29221,.F.); +#34147 = ORIENTED_EDGE('',*,*,#34117,.F.); +#34148 = PLANE('',#34149); +#34149 = AXIS2_PLACEMENT_3D('',#34150,#34151,#34152); +#34150 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34151 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34152 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34153 = ADVANCED_FACE('',(#34154),#34190,.F.); +#34154 = FACE_BOUND('',#34155,.F.); +#34155 = EDGE_LOOP('',(#34156,#34157,#34165,#34173,#34181,#34187,#34188, + #34189)); +#34156 = ORIENTED_EDGE('',*,*,#29309,.F.); +#34157 = ORIENTED_EDGE('',*,*,#34158,.T.); +#34158 = EDGE_CURVE('',#29302,#34159,#34161,.T.); +#34159 = VERTEX_POINT('',#34160); +#34160 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#34161 = LINE('',#34162,#34163); +#34162 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#34163 = VECTOR('',#34164,1.); +#34164 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34165 = ORIENTED_EDGE('',*,*,#34166,.T.); +#34166 = EDGE_CURVE('',#34159,#34167,#34169,.T.); +#34167 = VERTEX_POINT('',#34168); +#34168 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#34169 = LINE('',#34170,#34171); +#34170 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#34171 = VECTOR('',#34172,1.); +#34172 = DIRECTION('',(0.,0.,-1.)); +#34173 = ORIENTED_EDGE('',*,*,#34174,.T.); +#34174 = EDGE_CURVE('',#34167,#34175,#34177,.T.); +#34175 = VERTEX_POINT('',#34176); +#34176 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#34177 = LINE('',#34178,#34179); +#34178 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#34179 = VECTOR('',#34180,1.); +#34180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34181 = ORIENTED_EDGE('',*,*,#34182,.T.); +#34182 = EDGE_CURVE('',#34175,#34134,#34183,.T.); +#34183 = LINE('',#34184,#34185); +#34184 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#34185 = VECTOR('',#34186,1.); +#34186 = DIRECTION('',(0.,0.,1.)); +#34187 = ORIENTED_EDGE('',*,*,#34141,.T.); +#34188 = ORIENTED_EDGE('',*,*,#29213,.F.); +#34189 = ORIENTED_EDGE('',*,*,#34053,.T.); +#34190 = PLANE('',#34191); +#34191 = AXIS2_PLACEMENT_3D('',#34192,#34193,#34194); +#34192 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#34193 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34194 = DIRECTION('',(0.,0.,1.)); +#34195 = ADVANCED_FACE('',(#34196),#34207,.T.); +#34196 = FACE_BOUND('',#34197,.T.); +#34197 = EDGE_LOOP('',(#34198,#34199,#34200,#34206)); +#34198 = ORIENTED_EDGE('',*,*,#29301,.T.); +#34199 = ORIENTED_EDGE('',*,*,#34158,.T.); +#34200 = ORIENTED_EDGE('',*,*,#34201,.F.); +#34201 = EDGE_CURVE('',#34086,#34159,#34202,.T.); +#34202 = LINE('',#34203,#34204); +#34203 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#34204 = VECTOR('',#34205,1.); +#34205 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34206 = ORIENTED_EDGE('',*,*,#34085,.F.); +#34207 = PLANE('',#34208); +#34208 = AXIS2_PLACEMENT_3D('',#34209,#34210,#34211); +#34209 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#34210 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34211 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34212 = ADVANCED_FACE('',(#34213),#34224,.T.); +#34213 = FACE_BOUND('',#34214,.T.); +#34214 = EDGE_LOOP('',(#34215,#34216,#34217,#34218)); +#34215 = ORIENTED_EDGE('',*,*,#29477,.T.); +#34216 = ORIENTED_EDGE('',*,*,#29340,.T.); +#34217 = ORIENTED_EDGE('',*,*,#29365,.T.); +#34218 = ORIENTED_EDGE('',*,*,#34219,.T.); +#34219 = EDGE_CURVE('',#29366,#29470,#34220,.T.); +#34220 = LINE('',#34221,#34222); +#34221 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#34222 = VECTOR('',#34223,1.); +#34223 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34224 = PLANE('',#34225); +#34225 = AXIS2_PLACEMENT_3D('',#34226,#34227,#34228); +#34226 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#34227 = DIRECTION('',(0.,0.,1.)); +#34228 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34229 = ADVANCED_FACE('',(#34230),#34241,.T.); +#34230 = FACE_BOUND('',#34231,.T.); +#34231 = EDGE_LOOP('',(#34232,#34233,#34239,#34240)); +#34232 = ORIENTED_EDGE('',*,*,#29445,.T.); +#34233 = ORIENTED_EDGE('',*,*,#34234,.F.); +#34234 = EDGE_CURVE('',#29390,#29446,#34235,.T.); +#34235 = LINE('',#34236,#34237); +#34236 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#34237 = VECTOR('',#34238,1.); +#34238 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34239 = ORIENTED_EDGE('',*,*,#29397,.T.); +#34240 = ORIENTED_EDGE('',*,*,#29420,.T.); +#34241 = PLANE('',#34242); +#34242 = AXIS2_PLACEMENT_3D('',#34243,#34244,#34245); +#34243 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#34244 = DIRECTION('',(0.,0.,1.)); +#34245 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34246 = ADVANCED_FACE('',(#34247),#34290,.T.); +#34247 = FACE_BOUND('',#34248,.T.); +#34248 = EDGE_LOOP('',(#34249,#34250,#34258,#34266,#34274,#34282,#34288, + #34289)); +#34249 = ORIENTED_EDGE('',*,*,#29453,.F.); +#34250 = ORIENTED_EDGE('',*,*,#34251,.T.); +#34251 = EDGE_CURVE('',#29454,#34252,#34254,.T.); +#34252 = VERTEX_POINT('',#34253); +#34253 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#34254 = LINE('',#34255,#34256); +#34255 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#34256 = VECTOR('',#34257,1.); +#34257 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34258 = ORIENTED_EDGE('',*,*,#34259,.T.); +#34259 = EDGE_CURVE('',#34252,#34260,#34262,.T.); +#34260 = VERTEX_POINT('',#34261); +#34261 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#34262 = LINE('',#34263,#34264); +#34263 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#34264 = VECTOR('',#34265,1.); +#34265 = DIRECTION('',(0.,0.,-1.)); +#34266 = ORIENTED_EDGE('',*,*,#34267,.T.); +#34267 = EDGE_CURVE('',#34260,#34268,#34270,.T.); +#34268 = VERTEX_POINT('',#34269); +#34269 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#34270 = LINE('',#34271,#34272); +#34271 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#34272 = VECTOR('',#34273,1.); +#34273 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34274 = ORIENTED_EDGE('',*,*,#34275,.T.); +#34275 = EDGE_CURVE('',#34268,#34276,#34278,.T.); +#34276 = VERTEX_POINT('',#34277); +#34277 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34278 = LINE('',#34279,#34280); +#34279 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#34280 = VECTOR('',#34281,1.); +#34281 = DIRECTION('',(0.,0.,1.)); +#34282 = ORIENTED_EDGE('',*,*,#34283,.T.); +#34283 = EDGE_CURVE('',#34276,#29382,#34284,.T.); +#34284 = LINE('',#34285,#34286); +#34285 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34286 = VECTOR('',#34287,1.); +#34287 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34288 = ORIENTED_EDGE('',*,*,#29389,.F.); +#34289 = ORIENTED_EDGE('',*,*,#34234,.T.); +#34290 = PLANE('',#34291); +#34291 = AXIS2_PLACEMENT_3D('',#34292,#34293,#34294); +#34292 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#34293 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34294 = DIRECTION('',(0.,0.,1.)); +#34295 = ADVANCED_FACE('',(#34296),#34314,.T.); +#34296 = FACE_BOUND('',#34297,.T.); +#34297 = EDGE_LOOP('',(#34298,#34306,#34312,#34313)); +#34298 = ORIENTED_EDGE('',*,*,#34299,.T.); +#34299 = EDGE_CURVE('',#34276,#34300,#34302,.T.); +#34300 = VERTEX_POINT('',#34301); +#34301 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#34302 = LINE('',#34303,#34304); +#34303 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34304 = VECTOR('',#34305,1.); +#34305 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34306 = ORIENTED_EDGE('',*,*,#34307,.T.); +#34307 = EDGE_CURVE('',#34300,#29374,#34308,.T.); +#34308 = LINE('',#34309,#34310); +#34309 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#34310 = VECTOR('',#34311,1.); +#34311 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34312 = ORIENTED_EDGE('',*,*,#29381,.F.); +#34313 = ORIENTED_EDGE('',*,*,#34283,.F.); +#34314 = PLANE('',#34315); +#34315 = AXIS2_PLACEMENT_3D('',#34316,#34317,#34318); +#34316 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34317 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34318 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34319 = ADVANCED_FACE('',(#34320),#34356,.F.); +#34320 = FACE_BOUND('',#34321,.F.); +#34321 = EDGE_LOOP('',(#34322,#34323,#34331,#34339,#34347,#34353,#34354, + #34355)); +#34322 = ORIENTED_EDGE('',*,*,#29469,.F.); +#34323 = ORIENTED_EDGE('',*,*,#34324,.T.); +#34324 = EDGE_CURVE('',#29462,#34325,#34327,.T.); +#34325 = VERTEX_POINT('',#34326); +#34326 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#34327 = LINE('',#34328,#34329); +#34328 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#34329 = VECTOR('',#34330,1.); +#34330 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34331 = ORIENTED_EDGE('',*,*,#34332,.T.); +#34332 = EDGE_CURVE('',#34325,#34333,#34335,.T.); +#34333 = VERTEX_POINT('',#34334); +#34334 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#34335 = LINE('',#34336,#34337); +#34336 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#34337 = VECTOR('',#34338,1.); +#34338 = DIRECTION('',(0.,0.,-1.)); +#34339 = ORIENTED_EDGE('',*,*,#34340,.T.); +#34340 = EDGE_CURVE('',#34333,#34341,#34343,.T.); +#34341 = VERTEX_POINT('',#34342); +#34342 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#34343 = LINE('',#34344,#34345); +#34344 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#34345 = VECTOR('',#34346,1.); +#34346 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34347 = ORIENTED_EDGE('',*,*,#34348,.T.); +#34348 = EDGE_CURVE('',#34341,#34300,#34349,.T.); +#34349 = LINE('',#34350,#34351); +#34350 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#34351 = VECTOR('',#34352,1.); +#34352 = DIRECTION('',(0.,0.,1.)); +#34353 = ORIENTED_EDGE('',*,*,#34307,.T.); +#34354 = ORIENTED_EDGE('',*,*,#29373,.F.); +#34355 = ORIENTED_EDGE('',*,*,#34219,.T.); +#34356 = PLANE('',#34357); +#34357 = AXIS2_PLACEMENT_3D('',#34358,#34359,#34360); +#34358 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#34359 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34360 = DIRECTION('',(0.,0.,1.)); +#34361 = ADVANCED_FACE('',(#34362),#34373,.T.); +#34362 = FACE_BOUND('',#34363,.T.); +#34363 = EDGE_LOOP('',(#34364,#34365,#34366,#34372)); +#34364 = ORIENTED_EDGE('',*,*,#29461,.T.); +#34365 = ORIENTED_EDGE('',*,*,#34324,.T.); +#34366 = ORIENTED_EDGE('',*,*,#34367,.F.); +#34367 = EDGE_CURVE('',#34252,#34325,#34368,.T.); +#34368 = LINE('',#34369,#34370); +#34369 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#34370 = VECTOR('',#34371,1.); +#34371 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34372 = ORIENTED_EDGE('',*,*,#34251,.F.); +#34373 = PLANE('',#34374); +#34374 = AXIS2_PLACEMENT_3D('',#34375,#34376,#34377); +#34375 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#34376 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34377 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34378 = ADVANCED_FACE('',(#34379),#34390,.T.); +#34379 = FACE_BOUND('',#34380,.T.); +#34380 = EDGE_LOOP('',(#34381,#34382,#34383,#34384)); +#34381 = ORIENTED_EDGE('',*,*,#29637,.T.); +#34382 = ORIENTED_EDGE('',*,*,#29500,.T.); +#34383 = ORIENTED_EDGE('',*,*,#29525,.T.); +#34384 = ORIENTED_EDGE('',*,*,#34385,.T.); +#34385 = EDGE_CURVE('',#29526,#29630,#34386,.T.); +#34386 = LINE('',#34387,#34388); +#34387 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#34388 = VECTOR('',#34389,1.); +#34389 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34390 = PLANE('',#34391); +#34391 = AXIS2_PLACEMENT_3D('',#34392,#34393,#34394); +#34392 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#34393 = DIRECTION('',(0.,0.,1.)); +#34394 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34395 = ADVANCED_FACE('',(#34396),#34407,.T.); +#34396 = FACE_BOUND('',#34397,.T.); +#34397 = EDGE_LOOP('',(#34398,#34399,#34405,#34406)); +#34398 = ORIENTED_EDGE('',*,*,#29605,.T.); +#34399 = ORIENTED_EDGE('',*,*,#34400,.F.); +#34400 = EDGE_CURVE('',#29550,#29606,#34401,.T.); +#34401 = LINE('',#34402,#34403); +#34402 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#34403 = VECTOR('',#34404,1.); +#34404 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34405 = ORIENTED_EDGE('',*,*,#29557,.T.); +#34406 = ORIENTED_EDGE('',*,*,#29580,.T.); +#34407 = PLANE('',#34408); +#34408 = AXIS2_PLACEMENT_3D('',#34409,#34410,#34411); +#34409 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#34410 = DIRECTION('',(0.,0.,1.)); +#34411 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34412 = ADVANCED_FACE('',(#34413),#34456,.T.); +#34413 = FACE_BOUND('',#34414,.T.); +#34414 = EDGE_LOOP('',(#34415,#34416,#34424,#34432,#34440,#34448,#34454, + #34455)); +#34415 = ORIENTED_EDGE('',*,*,#29613,.F.); +#34416 = ORIENTED_EDGE('',*,*,#34417,.T.); +#34417 = EDGE_CURVE('',#29614,#34418,#34420,.T.); +#34418 = VERTEX_POINT('',#34419); +#34419 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#34420 = LINE('',#34421,#34422); +#34421 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#34422 = VECTOR('',#34423,1.); +#34423 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34424 = ORIENTED_EDGE('',*,*,#34425,.T.); +#34425 = EDGE_CURVE('',#34418,#34426,#34428,.T.); +#34426 = VERTEX_POINT('',#34427); +#34427 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#34428 = LINE('',#34429,#34430); +#34429 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#34430 = VECTOR('',#34431,1.); +#34431 = DIRECTION('',(0.,0.,-1.)); +#34432 = ORIENTED_EDGE('',*,*,#34433,.T.); +#34433 = EDGE_CURVE('',#34426,#34434,#34436,.T.); +#34434 = VERTEX_POINT('',#34435); +#34435 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#34436 = LINE('',#34437,#34438); +#34437 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#34438 = VECTOR('',#34439,1.); +#34439 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34440 = ORIENTED_EDGE('',*,*,#34441,.T.); +#34441 = EDGE_CURVE('',#34434,#34442,#34444,.T.); +#34442 = VERTEX_POINT('',#34443); +#34443 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34444 = LINE('',#34445,#34446); +#34445 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#34446 = VECTOR('',#34447,1.); +#34447 = DIRECTION('',(0.,0.,1.)); +#34448 = ORIENTED_EDGE('',*,*,#34449,.T.); +#34449 = EDGE_CURVE('',#34442,#29542,#34450,.T.); +#34450 = LINE('',#34451,#34452); +#34451 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34452 = VECTOR('',#34453,1.); +#34453 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34454 = ORIENTED_EDGE('',*,*,#29549,.F.); +#34455 = ORIENTED_EDGE('',*,*,#34400,.T.); +#34456 = PLANE('',#34457); +#34457 = AXIS2_PLACEMENT_3D('',#34458,#34459,#34460); +#34458 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#34459 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34460 = DIRECTION('',(0.,0.,1.)); +#34461 = ADVANCED_FACE('',(#34462),#34480,.T.); +#34462 = FACE_BOUND('',#34463,.T.); +#34463 = EDGE_LOOP('',(#34464,#34472,#34478,#34479)); +#34464 = ORIENTED_EDGE('',*,*,#34465,.T.); +#34465 = EDGE_CURVE('',#34442,#34466,#34468,.T.); +#34466 = VERTEX_POINT('',#34467); +#34467 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#34468 = LINE('',#34469,#34470); +#34469 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34470 = VECTOR('',#34471,1.); +#34471 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34472 = ORIENTED_EDGE('',*,*,#34473,.T.); +#34473 = EDGE_CURVE('',#34466,#29534,#34474,.T.); +#34474 = LINE('',#34475,#34476); +#34475 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#34476 = VECTOR('',#34477,1.); +#34477 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34478 = ORIENTED_EDGE('',*,*,#29541,.F.); +#34479 = ORIENTED_EDGE('',*,*,#34449,.F.); +#34480 = PLANE('',#34481); +#34481 = AXIS2_PLACEMENT_3D('',#34482,#34483,#34484); +#34482 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34483 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34484 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34485 = ADVANCED_FACE('',(#34486),#34522,.F.); +#34486 = FACE_BOUND('',#34487,.F.); +#34487 = EDGE_LOOP('',(#34488,#34489,#34497,#34505,#34513,#34519,#34520, + #34521)); +#34488 = ORIENTED_EDGE('',*,*,#29629,.F.); +#34489 = ORIENTED_EDGE('',*,*,#34490,.T.); +#34490 = EDGE_CURVE('',#29622,#34491,#34493,.T.); +#34491 = VERTEX_POINT('',#34492); +#34492 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#34493 = LINE('',#34494,#34495); +#34494 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#34495 = VECTOR('',#34496,1.); +#34496 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34497 = ORIENTED_EDGE('',*,*,#34498,.T.); +#34498 = EDGE_CURVE('',#34491,#34499,#34501,.T.); +#34499 = VERTEX_POINT('',#34500); +#34500 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#34501 = LINE('',#34502,#34503); +#34502 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#34503 = VECTOR('',#34504,1.); +#34504 = DIRECTION('',(0.,0.,-1.)); +#34505 = ORIENTED_EDGE('',*,*,#34506,.T.); +#34506 = EDGE_CURVE('',#34499,#34507,#34509,.T.); +#34507 = VERTEX_POINT('',#34508); +#34508 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#34509 = LINE('',#34510,#34511); +#34510 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#34511 = VECTOR('',#34512,1.); +#34512 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34513 = ORIENTED_EDGE('',*,*,#34514,.T.); +#34514 = EDGE_CURVE('',#34507,#34466,#34515,.T.); +#34515 = LINE('',#34516,#34517); +#34516 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#34517 = VECTOR('',#34518,1.); +#34518 = DIRECTION('',(0.,0.,1.)); +#34519 = ORIENTED_EDGE('',*,*,#34473,.T.); +#34520 = ORIENTED_EDGE('',*,*,#29533,.F.); +#34521 = ORIENTED_EDGE('',*,*,#34385,.T.); +#34522 = PLANE('',#34523); +#34523 = AXIS2_PLACEMENT_3D('',#34524,#34525,#34526); +#34524 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#34525 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34526 = DIRECTION('',(0.,0.,1.)); +#34527 = ADVANCED_FACE('',(#34528),#34539,.T.); +#34528 = FACE_BOUND('',#34529,.T.); +#34529 = EDGE_LOOP('',(#34530,#34531,#34532,#34538)); +#34530 = ORIENTED_EDGE('',*,*,#29621,.T.); +#34531 = ORIENTED_EDGE('',*,*,#34490,.T.); +#34532 = ORIENTED_EDGE('',*,*,#34533,.F.); +#34533 = EDGE_CURVE('',#34418,#34491,#34534,.T.); +#34534 = LINE('',#34535,#34536); +#34535 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#34536 = VECTOR('',#34537,1.); +#34537 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34538 = ORIENTED_EDGE('',*,*,#34417,.F.); +#34539 = PLANE('',#34540); +#34540 = AXIS2_PLACEMENT_3D('',#34541,#34542,#34543); +#34541 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#34542 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34543 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34544 = ADVANCED_FACE('',(#34545),#34556,.T.); +#34545 = FACE_BOUND('',#34546,.T.); +#34546 = EDGE_LOOP('',(#34547,#34548,#34549,#34550)); +#34547 = ORIENTED_EDGE('',*,*,#29797,.T.); +#34548 = ORIENTED_EDGE('',*,*,#29660,.T.); +#34549 = ORIENTED_EDGE('',*,*,#29685,.T.); +#34550 = ORIENTED_EDGE('',*,*,#34551,.T.); +#34551 = EDGE_CURVE('',#29686,#29790,#34552,.T.); +#34552 = LINE('',#34553,#34554); +#34553 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#34554 = VECTOR('',#34555,1.); +#34555 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34556 = PLANE('',#34557); +#34557 = AXIS2_PLACEMENT_3D('',#34558,#34559,#34560); +#34558 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#34559 = DIRECTION('',(0.,0.,1.)); +#34560 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34561 = ADVANCED_FACE('',(#34562),#34573,.T.); +#34562 = FACE_BOUND('',#34563,.T.); +#34563 = EDGE_LOOP('',(#34564,#34565,#34571,#34572)); +#34564 = ORIENTED_EDGE('',*,*,#29765,.T.); +#34565 = ORIENTED_EDGE('',*,*,#34566,.F.); +#34566 = EDGE_CURVE('',#29710,#29766,#34567,.T.); +#34567 = LINE('',#34568,#34569); +#34568 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#34569 = VECTOR('',#34570,1.); +#34570 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34571 = ORIENTED_EDGE('',*,*,#29717,.T.); +#34572 = ORIENTED_EDGE('',*,*,#29740,.T.); +#34573 = PLANE('',#34574); +#34574 = AXIS2_PLACEMENT_3D('',#34575,#34576,#34577); +#34575 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#34576 = DIRECTION('',(0.,0.,1.)); +#34577 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34578 = ADVANCED_FACE('',(#34579),#34622,.T.); +#34579 = FACE_BOUND('',#34580,.T.); +#34580 = EDGE_LOOP('',(#34581,#34582,#34590,#34598,#34606,#34614,#34620, + #34621)); +#34581 = ORIENTED_EDGE('',*,*,#29773,.F.); +#34582 = ORIENTED_EDGE('',*,*,#34583,.T.); +#34583 = EDGE_CURVE('',#29774,#34584,#34586,.T.); +#34584 = VERTEX_POINT('',#34585); +#34585 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#34586 = LINE('',#34587,#34588); +#34587 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#34588 = VECTOR('',#34589,1.); +#34589 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34590 = ORIENTED_EDGE('',*,*,#34591,.T.); +#34591 = EDGE_CURVE('',#34584,#34592,#34594,.T.); +#34592 = VERTEX_POINT('',#34593); +#34593 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#34594 = LINE('',#34595,#34596); +#34595 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#34596 = VECTOR('',#34597,1.); +#34597 = DIRECTION('',(0.,0.,-1.)); +#34598 = ORIENTED_EDGE('',*,*,#34599,.T.); +#34599 = EDGE_CURVE('',#34592,#34600,#34602,.T.); +#34600 = VERTEX_POINT('',#34601); +#34601 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#34602 = LINE('',#34603,#34604); +#34603 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#34604 = VECTOR('',#34605,1.); +#34605 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34606 = ORIENTED_EDGE('',*,*,#34607,.T.); +#34607 = EDGE_CURVE('',#34600,#34608,#34610,.T.); +#34608 = VERTEX_POINT('',#34609); +#34609 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34610 = LINE('',#34611,#34612); +#34611 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#34612 = VECTOR('',#34613,1.); +#34613 = DIRECTION('',(0.,0.,1.)); +#34614 = ORIENTED_EDGE('',*,*,#34615,.T.); +#34615 = EDGE_CURVE('',#34608,#29702,#34616,.T.); +#34616 = LINE('',#34617,#34618); +#34617 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34618 = VECTOR('',#34619,1.); +#34619 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34620 = ORIENTED_EDGE('',*,*,#29709,.F.); +#34621 = ORIENTED_EDGE('',*,*,#34566,.T.); +#34622 = PLANE('',#34623); +#34623 = AXIS2_PLACEMENT_3D('',#34624,#34625,#34626); +#34624 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#34625 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34626 = DIRECTION('',(0.,0.,1.)); +#34627 = ADVANCED_FACE('',(#34628),#34646,.T.); +#34628 = FACE_BOUND('',#34629,.T.); +#34629 = EDGE_LOOP('',(#34630,#34638,#34644,#34645)); +#34630 = ORIENTED_EDGE('',*,*,#34631,.T.); +#34631 = EDGE_CURVE('',#34608,#34632,#34634,.T.); +#34632 = VERTEX_POINT('',#34633); +#34633 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#34634 = LINE('',#34635,#34636); +#34635 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34636 = VECTOR('',#34637,1.); +#34637 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34638 = ORIENTED_EDGE('',*,*,#34639,.T.); +#34639 = EDGE_CURVE('',#34632,#29694,#34640,.T.); +#34640 = LINE('',#34641,#34642); +#34641 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#34642 = VECTOR('',#34643,1.); +#34643 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34644 = ORIENTED_EDGE('',*,*,#29701,.F.); +#34645 = ORIENTED_EDGE('',*,*,#34615,.F.); +#34646 = PLANE('',#34647); +#34647 = AXIS2_PLACEMENT_3D('',#34648,#34649,#34650); +#34648 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34649 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34650 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34651 = ADVANCED_FACE('',(#34652),#34688,.F.); +#34652 = FACE_BOUND('',#34653,.F.); +#34653 = EDGE_LOOP('',(#34654,#34655,#34663,#34671,#34679,#34685,#34686, + #34687)); +#34654 = ORIENTED_EDGE('',*,*,#29789,.F.); +#34655 = ORIENTED_EDGE('',*,*,#34656,.T.); +#34656 = EDGE_CURVE('',#29782,#34657,#34659,.T.); +#34657 = VERTEX_POINT('',#34658); +#34658 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#34659 = LINE('',#34660,#34661); +#34660 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#34661 = VECTOR('',#34662,1.); +#34662 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34663 = ORIENTED_EDGE('',*,*,#34664,.T.); +#34664 = EDGE_CURVE('',#34657,#34665,#34667,.T.); +#34665 = VERTEX_POINT('',#34666); +#34666 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#34667 = LINE('',#34668,#34669); +#34668 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#34669 = VECTOR('',#34670,1.); +#34670 = DIRECTION('',(0.,0.,-1.)); +#34671 = ORIENTED_EDGE('',*,*,#34672,.T.); +#34672 = EDGE_CURVE('',#34665,#34673,#34675,.T.); +#34673 = VERTEX_POINT('',#34674); +#34674 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#34675 = LINE('',#34676,#34677); +#34676 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#34677 = VECTOR('',#34678,1.); +#34678 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34679 = ORIENTED_EDGE('',*,*,#34680,.T.); +#34680 = EDGE_CURVE('',#34673,#34632,#34681,.T.); +#34681 = LINE('',#34682,#34683); +#34682 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#34683 = VECTOR('',#34684,1.); +#34684 = DIRECTION('',(0.,0.,1.)); +#34685 = ORIENTED_EDGE('',*,*,#34639,.T.); +#34686 = ORIENTED_EDGE('',*,*,#29693,.F.); +#34687 = ORIENTED_EDGE('',*,*,#34551,.T.); +#34688 = PLANE('',#34689); +#34689 = AXIS2_PLACEMENT_3D('',#34690,#34691,#34692); +#34690 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#34691 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34692 = DIRECTION('',(0.,0.,1.)); +#34693 = ADVANCED_FACE('',(#34694),#34705,.T.); +#34694 = FACE_BOUND('',#34695,.T.); +#34695 = EDGE_LOOP('',(#34696,#34697,#34698,#34704)); +#34696 = ORIENTED_EDGE('',*,*,#29781,.T.); +#34697 = ORIENTED_EDGE('',*,*,#34656,.T.); +#34698 = ORIENTED_EDGE('',*,*,#34699,.F.); +#34699 = EDGE_CURVE('',#34584,#34657,#34700,.T.); +#34700 = LINE('',#34701,#34702); +#34701 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#34702 = VECTOR('',#34703,1.); +#34703 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34704 = ORIENTED_EDGE('',*,*,#34583,.F.); +#34705 = PLANE('',#34706); +#34706 = AXIS2_PLACEMENT_3D('',#34707,#34708,#34709); +#34707 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#34708 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34709 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34710 = ADVANCED_FACE('',(#34711),#34722,.T.); +#34711 = FACE_BOUND('',#34712,.T.); +#34712 = EDGE_LOOP('',(#34713,#34714,#34715,#34716)); +#34713 = ORIENTED_EDGE('',*,*,#29957,.T.); +#34714 = ORIENTED_EDGE('',*,*,#29820,.T.); +#34715 = ORIENTED_EDGE('',*,*,#29845,.T.); +#34716 = ORIENTED_EDGE('',*,*,#34717,.T.); +#34717 = EDGE_CURVE('',#29846,#29950,#34718,.T.); +#34718 = LINE('',#34719,#34720); +#34719 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#34720 = VECTOR('',#34721,1.); +#34721 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34722 = PLANE('',#34723); +#34723 = AXIS2_PLACEMENT_3D('',#34724,#34725,#34726); +#34724 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#34725 = DIRECTION('',(0.,0.,1.)); +#34726 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34727 = ADVANCED_FACE('',(#34728),#34739,.T.); +#34728 = FACE_BOUND('',#34729,.T.); +#34729 = EDGE_LOOP('',(#34730,#34731,#34737,#34738)); +#34730 = ORIENTED_EDGE('',*,*,#29925,.T.); +#34731 = ORIENTED_EDGE('',*,*,#34732,.F.); +#34732 = EDGE_CURVE('',#29870,#29926,#34733,.T.); +#34733 = LINE('',#34734,#34735); +#34734 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#34735 = VECTOR('',#34736,1.); +#34736 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34737 = ORIENTED_EDGE('',*,*,#29877,.T.); +#34738 = ORIENTED_EDGE('',*,*,#29900,.T.); +#34739 = PLANE('',#34740); +#34740 = AXIS2_PLACEMENT_3D('',#34741,#34742,#34743); +#34741 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#34742 = DIRECTION('',(0.,0.,1.)); +#34743 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34744 = ADVANCED_FACE('',(#34745),#34788,.T.); +#34745 = FACE_BOUND('',#34746,.T.); +#34746 = EDGE_LOOP('',(#34747,#34748,#34756,#34764,#34772,#34780,#34786, + #34787)); +#34747 = ORIENTED_EDGE('',*,*,#29933,.F.); +#34748 = ORIENTED_EDGE('',*,*,#34749,.T.); +#34749 = EDGE_CURVE('',#29934,#34750,#34752,.T.); +#34750 = VERTEX_POINT('',#34751); +#34751 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#34752 = LINE('',#34753,#34754); +#34753 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#34754 = VECTOR('',#34755,1.); +#34755 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34756 = ORIENTED_EDGE('',*,*,#34757,.T.); +#34757 = EDGE_CURVE('',#34750,#34758,#34760,.T.); +#34758 = VERTEX_POINT('',#34759); +#34759 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#34760 = LINE('',#34761,#34762); +#34761 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#34762 = VECTOR('',#34763,1.); +#34763 = DIRECTION('',(0.,0.,-1.)); +#34764 = ORIENTED_EDGE('',*,*,#34765,.T.); +#34765 = EDGE_CURVE('',#34758,#34766,#34768,.T.); +#34766 = VERTEX_POINT('',#34767); +#34767 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#34768 = LINE('',#34769,#34770); +#34769 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#34770 = VECTOR('',#34771,1.); +#34771 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34772 = ORIENTED_EDGE('',*,*,#34773,.T.); +#34773 = EDGE_CURVE('',#34766,#34774,#34776,.T.); +#34774 = VERTEX_POINT('',#34775); +#34775 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34776 = LINE('',#34777,#34778); +#34777 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#34778 = VECTOR('',#34779,1.); +#34779 = DIRECTION('',(0.,0.,1.)); +#34780 = ORIENTED_EDGE('',*,*,#34781,.T.); +#34781 = EDGE_CURVE('',#34774,#29862,#34782,.T.); +#34782 = LINE('',#34783,#34784); +#34783 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34784 = VECTOR('',#34785,1.); +#34785 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34786 = ORIENTED_EDGE('',*,*,#29869,.F.); +#34787 = ORIENTED_EDGE('',*,*,#34732,.T.); +#34788 = PLANE('',#34789); +#34789 = AXIS2_PLACEMENT_3D('',#34790,#34791,#34792); +#34790 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#34791 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34792 = DIRECTION('',(0.,0.,1.)); +#34793 = ADVANCED_FACE('',(#34794),#34812,.T.); +#34794 = FACE_BOUND('',#34795,.T.); +#34795 = EDGE_LOOP('',(#34796,#34804,#34810,#34811)); +#34796 = ORIENTED_EDGE('',*,*,#34797,.T.); +#34797 = EDGE_CURVE('',#34774,#34798,#34800,.T.); +#34798 = VERTEX_POINT('',#34799); +#34799 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#34800 = LINE('',#34801,#34802); +#34801 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34802 = VECTOR('',#34803,1.); +#34803 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34804 = ORIENTED_EDGE('',*,*,#34805,.T.); +#34805 = EDGE_CURVE('',#34798,#29854,#34806,.T.); +#34806 = LINE('',#34807,#34808); +#34807 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#34808 = VECTOR('',#34809,1.); +#34809 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34810 = ORIENTED_EDGE('',*,*,#29861,.F.); +#34811 = ORIENTED_EDGE('',*,*,#34781,.F.); +#34812 = PLANE('',#34813); +#34813 = AXIS2_PLACEMENT_3D('',#34814,#34815,#34816); +#34814 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34815 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34816 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34817 = ADVANCED_FACE('',(#34818),#34854,.F.); +#34818 = FACE_BOUND('',#34819,.F.); +#34819 = EDGE_LOOP('',(#34820,#34821,#34829,#34837,#34845,#34851,#34852, + #34853)); +#34820 = ORIENTED_EDGE('',*,*,#29949,.F.); +#34821 = ORIENTED_EDGE('',*,*,#34822,.T.); +#34822 = EDGE_CURVE('',#29942,#34823,#34825,.T.); +#34823 = VERTEX_POINT('',#34824); +#34824 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#34825 = LINE('',#34826,#34827); +#34826 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#34827 = VECTOR('',#34828,1.); +#34828 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34829 = ORIENTED_EDGE('',*,*,#34830,.T.); +#34830 = EDGE_CURVE('',#34823,#34831,#34833,.T.); +#34831 = VERTEX_POINT('',#34832); +#34832 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#34833 = LINE('',#34834,#34835); +#34834 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#34835 = VECTOR('',#34836,1.); +#34836 = DIRECTION('',(0.,0.,-1.)); +#34837 = ORIENTED_EDGE('',*,*,#34838,.T.); +#34838 = EDGE_CURVE('',#34831,#34839,#34841,.T.); +#34839 = VERTEX_POINT('',#34840); +#34840 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#34841 = LINE('',#34842,#34843); +#34842 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#34843 = VECTOR('',#34844,1.); +#34844 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34845 = ORIENTED_EDGE('',*,*,#34846,.T.); +#34846 = EDGE_CURVE('',#34839,#34798,#34847,.T.); +#34847 = LINE('',#34848,#34849); +#34848 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#34849 = VECTOR('',#34850,1.); +#34850 = DIRECTION('',(0.,0.,1.)); +#34851 = ORIENTED_EDGE('',*,*,#34805,.T.); +#34852 = ORIENTED_EDGE('',*,*,#29853,.F.); +#34853 = ORIENTED_EDGE('',*,*,#34717,.T.); +#34854 = PLANE('',#34855); +#34855 = AXIS2_PLACEMENT_3D('',#34856,#34857,#34858); +#34856 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#34857 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34858 = DIRECTION('',(0.,0.,1.)); +#34859 = ADVANCED_FACE('',(#34860),#34871,.T.); +#34860 = FACE_BOUND('',#34861,.T.); +#34861 = EDGE_LOOP('',(#34862,#34863,#34864,#34870)); +#34862 = ORIENTED_EDGE('',*,*,#29941,.T.); +#34863 = ORIENTED_EDGE('',*,*,#34822,.T.); +#34864 = ORIENTED_EDGE('',*,*,#34865,.F.); +#34865 = EDGE_CURVE('',#34750,#34823,#34866,.T.); +#34866 = LINE('',#34867,#34868); +#34867 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#34868 = VECTOR('',#34869,1.); +#34869 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34870 = ORIENTED_EDGE('',*,*,#34749,.F.); +#34871 = PLANE('',#34872); +#34872 = AXIS2_PLACEMENT_3D('',#34873,#34874,#34875); +#34873 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#34874 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34875 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34876 = ADVANCED_FACE('',(#34877),#34888,.T.); +#34877 = FACE_BOUND('',#34878,.T.); +#34878 = EDGE_LOOP('',(#34879,#34880,#34881,#34882)); +#34879 = ORIENTED_EDGE('',*,*,#30117,.T.); +#34880 = ORIENTED_EDGE('',*,*,#29980,.T.); +#34881 = ORIENTED_EDGE('',*,*,#30005,.T.); +#34882 = ORIENTED_EDGE('',*,*,#34883,.T.); +#34883 = EDGE_CURVE('',#30006,#30110,#34884,.T.); +#34884 = LINE('',#34885,#34886); +#34885 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#34886 = VECTOR('',#34887,1.); +#34887 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34888 = PLANE('',#34889); +#34889 = AXIS2_PLACEMENT_3D('',#34890,#34891,#34892); +#34890 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#34891 = DIRECTION('',(0.,0.,1.)); +#34892 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34893 = ADVANCED_FACE('',(#34894),#34905,.T.); +#34894 = FACE_BOUND('',#34895,.T.); +#34895 = EDGE_LOOP('',(#34896,#34897,#34903,#34904)); +#34896 = ORIENTED_EDGE('',*,*,#30085,.T.); +#34897 = ORIENTED_EDGE('',*,*,#34898,.F.); +#34898 = EDGE_CURVE('',#30030,#30086,#34899,.T.); +#34899 = LINE('',#34900,#34901); +#34900 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#34901 = VECTOR('',#34902,1.); +#34902 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34903 = ORIENTED_EDGE('',*,*,#30037,.T.); +#34904 = ORIENTED_EDGE('',*,*,#30060,.T.); +#34905 = PLANE('',#34906); +#34906 = AXIS2_PLACEMENT_3D('',#34907,#34908,#34909); +#34907 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#34908 = DIRECTION('',(0.,0.,1.)); +#34909 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34910 = ADVANCED_FACE('',(#34911),#34954,.T.); +#34911 = FACE_BOUND('',#34912,.T.); +#34912 = EDGE_LOOP('',(#34913,#34914,#34922,#34930,#34938,#34946,#34952, + #34953)); +#34913 = ORIENTED_EDGE('',*,*,#30093,.F.); +#34914 = ORIENTED_EDGE('',*,*,#34915,.T.); +#34915 = EDGE_CURVE('',#30094,#34916,#34918,.T.); +#34916 = VERTEX_POINT('',#34917); +#34917 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#34918 = LINE('',#34919,#34920); +#34919 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#34920 = VECTOR('',#34921,1.); +#34921 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34922 = ORIENTED_EDGE('',*,*,#34923,.T.); +#34923 = EDGE_CURVE('',#34916,#34924,#34926,.T.); +#34924 = VERTEX_POINT('',#34925); +#34925 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#34926 = LINE('',#34927,#34928); +#34927 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#34928 = VECTOR('',#34929,1.); +#34929 = DIRECTION('',(0.,0.,-1.)); +#34930 = ORIENTED_EDGE('',*,*,#34931,.T.); +#34931 = EDGE_CURVE('',#34924,#34932,#34934,.T.); +#34932 = VERTEX_POINT('',#34933); +#34933 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#34934 = LINE('',#34935,#34936); +#34935 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#34936 = VECTOR('',#34937,1.); +#34937 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34938 = ORIENTED_EDGE('',*,*,#34939,.T.); +#34939 = EDGE_CURVE('',#34932,#34940,#34942,.T.); +#34940 = VERTEX_POINT('',#34941); +#34941 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34942 = LINE('',#34943,#34944); +#34943 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#34944 = VECTOR('',#34945,1.); +#34945 = DIRECTION('',(0.,0.,1.)); +#34946 = ORIENTED_EDGE('',*,*,#34947,.T.); +#34947 = EDGE_CURVE('',#34940,#30022,#34948,.T.); +#34948 = LINE('',#34949,#34950); +#34949 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34950 = VECTOR('',#34951,1.); +#34951 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34952 = ORIENTED_EDGE('',*,*,#30029,.F.); +#34953 = ORIENTED_EDGE('',*,*,#34898,.T.); +#34954 = PLANE('',#34955); +#34955 = AXIS2_PLACEMENT_3D('',#34956,#34957,#34958); +#34956 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#34957 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34958 = DIRECTION('',(0.,0.,1.)); +#34959 = ADVANCED_FACE('',(#34960),#34978,.T.); +#34960 = FACE_BOUND('',#34961,.T.); +#34961 = EDGE_LOOP('',(#34962,#34970,#34976,#34977)); +#34962 = ORIENTED_EDGE('',*,*,#34963,.T.); +#34963 = EDGE_CURVE('',#34940,#34964,#34966,.T.); +#34964 = VERTEX_POINT('',#34965); +#34965 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#34966 = LINE('',#34967,#34968); +#34967 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34968 = VECTOR('',#34969,1.); +#34969 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34970 = ORIENTED_EDGE('',*,*,#34971,.T.); +#34971 = EDGE_CURVE('',#34964,#30014,#34972,.T.); +#34972 = LINE('',#34973,#34974); +#34973 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#34974 = VECTOR('',#34975,1.); +#34975 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34976 = ORIENTED_EDGE('',*,*,#30021,.F.); +#34977 = ORIENTED_EDGE('',*,*,#34947,.F.); +#34978 = PLANE('',#34979); +#34979 = AXIS2_PLACEMENT_3D('',#34980,#34981,#34982); +#34980 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34981 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34982 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34983 = ADVANCED_FACE('',(#34984),#35020,.F.); +#34984 = FACE_BOUND('',#34985,.F.); +#34985 = EDGE_LOOP('',(#34986,#34987,#34995,#35003,#35011,#35017,#35018, + #35019)); +#34986 = ORIENTED_EDGE('',*,*,#30109,.F.); +#34987 = ORIENTED_EDGE('',*,*,#34988,.T.); +#34988 = EDGE_CURVE('',#30102,#34989,#34991,.T.); +#34989 = VERTEX_POINT('',#34990); +#34990 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#34991 = LINE('',#34992,#34993); +#34992 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#34993 = VECTOR('',#34994,1.); +#34994 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34995 = ORIENTED_EDGE('',*,*,#34996,.T.); +#34996 = EDGE_CURVE('',#34989,#34997,#34999,.T.); +#34997 = VERTEX_POINT('',#34998); +#34998 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#34999 = LINE('',#35000,#35001); +#35000 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#35001 = VECTOR('',#35002,1.); +#35002 = DIRECTION('',(0.,0.,-1.)); +#35003 = ORIENTED_EDGE('',*,*,#35004,.T.); +#35004 = EDGE_CURVE('',#34997,#35005,#35007,.T.); +#35005 = VERTEX_POINT('',#35006); +#35006 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#35007 = LINE('',#35008,#35009); +#35008 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#35009 = VECTOR('',#35010,1.); +#35010 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35011 = ORIENTED_EDGE('',*,*,#35012,.T.); +#35012 = EDGE_CURVE('',#35005,#34964,#35013,.T.); +#35013 = LINE('',#35014,#35015); +#35014 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#35015 = VECTOR('',#35016,1.); +#35016 = DIRECTION('',(0.,0.,1.)); +#35017 = ORIENTED_EDGE('',*,*,#34971,.T.); +#35018 = ORIENTED_EDGE('',*,*,#30013,.F.); +#35019 = ORIENTED_EDGE('',*,*,#34883,.T.); +#35020 = PLANE('',#35021); +#35021 = AXIS2_PLACEMENT_3D('',#35022,#35023,#35024); +#35022 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#35023 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#35024 = DIRECTION('',(0.,0.,1.)); +#35025 = ADVANCED_FACE('',(#35026),#35037,.T.); +#35026 = FACE_BOUND('',#35027,.T.); +#35027 = EDGE_LOOP('',(#35028,#35029,#35030,#35036)); +#35028 = ORIENTED_EDGE('',*,*,#30101,.T.); +#35029 = ORIENTED_EDGE('',*,*,#34988,.T.); +#35030 = ORIENTED_EDGE('',*,*,#35031,.F.); +#35031 = EDGE_CURVE('',#34916,#34989,#35032,.T.); +#35032 = LINE('',#35033,#35034); +#35033 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#35034 = VECTOR('',#35035,1.); +#35035 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35036 = ORIENTED_EDGE('',*,*,#34915,.F.); +#35037 = PLANE('',#35038); +#35038 = AXIS2_PLACEMENT_3D('',#35039,#35040,#35041); +#35039 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#35040 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35041 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35042 = ADVANCED_FACE('',(#35043),#35054,.T.); +#35043 = FACE_BOUND('',#35044,.T.); +#35044 = EDGE_LOOP('',(#35045,#35046,#35047,#35048)); +#35045 = ORIENTED_EDGE('',*,*,#30277,.T.); +#35046 = ORIENTED_EDGE('',*,*,#30140,.T.); +#35047 = ORIENTED_EDGE('',*,*,#30165,.T.); +#35048 = ORIENTED_EDGE('',*,*,#35049,.T.); +#35049 = EDGE_CURVE('',#30166,#30270,#35050,.T.); +#35050 = LINE('',#35051,#35052); +#35051 = CARTESIAN_POINT('',(0.1,3.541611448554E-15,0.9)); +#35052 = VECTOR('',#35053,1.); +#35053 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35054 = PLANE('',#35055); +#35055 = AXIS2_PLACEMENT_3D('',#35056,#35057,#35058); +#35056 = CARTESIAN_POINT('',(-9.367506770275E-17,7.105427357601E-15,0.9) + ); +#35057 = DIRECTION('',(0.,0.,1.)); +#35058 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35059 = ADVANCED_FACE('',(#35060),#35071,.T.); +#35060 = FACE_BOUND('',#35061,.T.); +#35061 = EDGE_LOOP('',(#35062,#35063,#35069,#35070)); +#35062 = ORIENTED_EDGE('',*,*,#30245,.T.); +#35063 = ORIENTED_EDGE('',*,*,#35064,.F.); +#35064 = EDGE_CURVE('',#30190,#30246,#35065,.T.); +#35065 = LINE('',#35066,#35067); +#35066 = CARTESIAN_POINT('',(-0.1,3.563815909047E-15,0.9)); +#35067 = VECTOR('',#35068,1.); +#35068 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35069 = ORIENTED_EDGE('',*,*,#30197,.T.); +#35070 = ORIENTED_EDGE('',*,*,#30220,.T.); +#35071 = PLANE('',#35072); +#35072 = AXIS2_PLACEMENT_3D('',#35073,#35074,#35075); +#35073 = CARTESIAN_POINT('',(-9.367506770275E-17,7.105427357601E-15,0.9) + ); +#35074 = DIRECTION('',(0.,0.,1.)); +#35075 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35076 = ADVANCED_FACE('',(#35077),#35120,.T.); +#35077 = FACE_BOUND('',#35078,.T.); +#35078 = EDGE_LOOP('',(#35079,#35080,#35088,#35096,#35104,#35112,#35118, + #35119)); +#35079 = ORIENTED_EDGE('',*,*,#30253,.F.); +#35080 = ORIENTED_EDGE('',*,*,#35081,.T.); +#35081 = EDGE_CURVE('',#30254,#35082,#35084,.T.); +#35082 = VERTEX_POINT('',#35083); +#35083 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#35084 = LINE('',#35085,#35086); +#35085 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#35086 = VECTOR('',#35087,1.); +#35087 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35088 = ORIENTED_EDGE('',*,*,#35089,.T.); +#35089 = EDGE_CURVE('',#35082,#35090,#35092,.T.); +#35090 = VERTEX_POINT('',#35091); +#35091 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#35092 = LINE('',#35093,#35094); +#35093 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#35094 = VECTOR('',#35095,1.); +#35095 = DIRECTION('',(0.,0.,-1.)); +#35096 = ORIENTED_EDGE('',*,*,#35097,.T.); +#35097 = EDGE_CURVE('',#35090,#35098,#35100,.T.); +#35098 = VERTEX_POINT('',#35099); +#35099 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#35100 = LINE('',#35101,#35102); +#35101 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#35102 = VECTOR('',#35103,1.); +#35103 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35104 = ORIENTED_EDGE('',*,*,#35105,.T.); +#35105 = EDGE_CURVE('',#35098,#35106,#35108,.T.); +#35106 = VERTEX_POINT('',#35107); +#35107 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35108 = LINE('',#35109,#35110); +#35109 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#35110 = VECTOR('',#35111,1.); +#35111 = DIRECTION('',(0.,0.,1.)); +#35112 = ORIENTED_EDGE('',*,*,#35113,.T.); +#35113 = EDGE_CURVE('',#35106,#30182,#35114,.T.); +#35114 = LINE('',#35115,#35116); +#35115 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35116 = VECTOR('',#35117,1.); +#35117 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35118 = ORIENTED_EDGE('',*,*,#30189,.F.); +#35119 = ORIENTED_EDGE('',*,*,#35064,.T.); +#35120 = PLANE('',#35121); +#35121 = AXIS2_PLACEMENT_3D('',#35122,#35123,#35124); +#35122 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#35123 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#35124 = DIRECTION('',(0.,0.,1.)); +#35125 = ADVANCED_FACE('',(#35126),#35144,.T.); +#35126 = FACE_BOUND('',#35127,.T.); +#35127 = EDGE_LOOP('',(#35128,#35136,#35142,#35143)); +#35128 = ORIENTED_EDGE('',*,*,#35129,.T.); +#35129 = EDGE_CURVE('',#35106,#35130,#35132,.T.); +#35130 = VERTEX_POINT('',#35131); +#35131 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#35132 = LINE('',#35133,#35134); +#35133 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35134 = VECTOR('',#35135,1.); +#35135 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35136 = ORIENTED_EDGE('',*,*,#35137,.T.); +#35137 = EDGE_CURVE('',#35130,#30174,#35138,.T.); +#35138 = LINE('',#35139,#35140); +#35139 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#35140 = VECTOR('',#35141,1.); +#35141 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35142 = ORIENTED_EDGE('',*,*,#30181,.F.); +#35143 = ORIENTED_EDGE('',*,*,#35113,.F.); +#35144 = PLANE('',#35145); +#35145 = AXIS2_PLACEMENT_3D('',#35146,#35147,#35148); +#35146 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35147 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#35148 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35149 = ADVANCED_FACE('',(#35150),#35186,.F.); +#35150 = FACE_BOUND('',#35151,.F.); +#35151 = EDGE_LOOP('',(#35152,#35153,#35161,#35169,#35177,#35183,#35184, + #35185)); +#35152 = ORIENTED_EDGE('',*,*,#30269,.F.); +#35153 = ORIENTED_EDGE('',*,*,#35154,.T.); +#35154 = EDGE_CURVE('',#30262,#35155,#35157,.T.); +#35155 = VERTEX_POINT('',#35156); +#35156 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#35157 = LINE('',#35158,#35159); +#35158 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#35159 = VECTOR('',#35160,1.); +#35160 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35161 = ORIENTED_EDGE('',*,*,#35162,.T.); +#35162 = EDGE_CURVE('',#35155,#35163,#35165,.T.); +#35163 = VERTEX_POINT('',#35164); +#35164 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#35165 = LINE('',#35166,#35167); +#35166 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#35167 = VECTOR('',#35168,1.); +#35168 = DIRECTION('',(0.,0.,-1.)); +#35169 = ORIENTED_EDGE('',*,*,#35170,.T.); +#35170 = EDGE_CURVE('',#35163,#35171,#35173,.T.); +#35171 = VERTEX_POINT('',#35172); +#35172 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#35173 = LINE('',#35174,#35175); +#35174 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#35175 = VECTOR('',#35176,1.); +#35176 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35177 = ORIENTED_EDGE('',*,*,#35178,.T.); +#35178 = EDGE_CURVE('',#35171,#35130,#35179,.T.); +#35179 = LINE('',#35180,#35181); +#35180 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#35181 = VECTOR('',#35182,1.); +#35182 = DIRECTION('',(0.,0.,1.)); +#35183 = ORIENTED_EDGE('',*,*,#35137,.T.); +#35184 = ORIENTED_EDGE('',*,*,#30173,.F.); +#35185 = ORIENTED_EDGE('',*,*,#35049,.T.); +#35186 = PLANE('',#35187); +#35187 = AXIS2_PLACEMENT_3D('',#35188,#35189,#35190); +#35188 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#35189 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#35190 = DIRECTION('',(0.,0.,1.)); +#35191 = ADVANCED_FACE('',(#35192),#35203,.T.); +#35192 = FACE_BOUND('',#35193,.T.); +#35193 = EDGE_LOOP('',(#35194,#35195,#35196,#35202)); +#35194 = ORIENTED_EDGE('',*,*,#30261,.T.); +#35195 = ORIENTED_EDGE('',*,*,#35154,.T.); +#35196 = ORIENTED_EDGE('',*,*,#35197,.F.); +#35197 = EDGE_CURVE('',#35082,#35155,#35198,.T.); +#35198 = LINE('',#35199,#35200); +#35199 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#35200 = VECTOR('',#35201,1.); +#35201 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35202 = ORIENTED_EDGE('',*,*,#35081,.F.); +#35203 = PLANE('',#35204); +#35204 = AXIS2_PLACEMENT_3D('',#35205,#35206,#35207); +#35205 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#35206 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35207 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35208 = ADVANCED_FACE('',(#35209),#35220,.T.); +#35209 = FACE_BOUND('',#35210,.T.); +#35210 = EDGE_LOOP('',(#35211,#35217,#35218,#35219)); +#35211 = ORIENTED_EDGE('',*,*,#35212,.T.); +#35212 = EDGE_CURVE('',#31944,#32017,#35213,.T.); +#35213 = LINE('',#35214,#35215); +#35214 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#35215 = VECTOR('',#35216,1.); +#35216 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35217 = ORIENTED_EDGE('',*,*,#32024,.T.); +#35218 = ORIENTED_EDGE('',*,*,#31975,.F.); +#35219 = ORIENTED_EDGE('',*,*,#31951,.F.); +#35220 = PLANE('',#35221); +#35221 = AXIS2_PLACEMENT_3D('',#35222,#35223,#35224); +#35222 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#35223 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35224 = DIRECTION('',(0.,0.,1.)); +#35225 = ADVANCED_FACE('',(#35226),#35237,.T.); +#35226 = FACE_BOUND('',#35227,.T.); +#35227 = EDGE_LOOP('',(#35228,#35234,#35235,#35236)); +#35228 = ORIENTED_EDGE('',*,*,#35229,.T.); +#35229 = EDGE_CURVE('',#31936,#32009,#35230,.T.); +#35230 = LINE('',#35231,#35232); +#35231 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#35232 = VECTOR('',#35233,1.); +#35233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35234 = ORIENTED_EDGE('',*,*,#32016,.T.); +#35235 = ORIENTED_EDGE('',*,*,#35212,.F.); +#35236 = ORIENTED_EDGE('',*,*,#31943,.F.); +#35237 = PLANE('',#35238); +#35238 = AXIS2_PLACEMENT_3D('',#35239,#35240,#35241); +#35239 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#35240 = DIRECTION('',(0.,0.,1.)); +#35241 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35242 = ADVANCED_FACE('',(#35243),#35249,.T.); +#35243 = FACE_BOUND('',#35244,.T.); +#35244 = EDGE_LOOP('',(#35245,#35246,#35247,#35248)); +#35245 = ORIENTED_EDGE('',*,*,#32043,.T.); +#35246 = ORIENTED_EDGE('',*,*,#32008,.T.); +#35247 = ORIENTED_EDGE('',*,*,#35229,.F.); +#35248 = ORIENTED_EDGE('',*,*,#31935,.F.); +#35249 = PLANE('',#35250); +#35250 = AXIS2_PLACEMENT_3D('',#35251,#35252,#35253); +#35251 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#35252 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35253 = DIRECTION('',(0.,0.,-1.)); +#35254 = ADVANCED_FACE('',(#35255),#35266,.T.); +#35255 = FACE_BOUND('',#35256,.T.); +#35256 = EDGE_LOOP('',(#35257,#35263,#35264,#35265)); +#35257 = ORIENTED_EDGE('',*,*,#35258,.T.); +#35258 = EDGE_CURVE('',#32110,#32183,#35259,.T.); +#35259 = LINE('',#35260,#35261); +#35260 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#35261 = VECTOR('',#35262,1.); +#35262 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35263 = ORIENTED_EDGE('',*,*,#32190,.T.); +#35264 = ORIENTED_EDGE('',*,*,#32141,.F.); +#35265 = ORIENTED_EDGE('',*,*,#32117,.F.); +#35266 = PLANE('',#35267); +#35267 = AXIS2_PLACEMENT_3D('',#35268,#35269,#35270); +#35268 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#35269 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35270 = DIRECTION('',(0.,0.,1.)); +#35271 = ADVANCED_FACE('',(#35272),#35283,.T.); +#35272 = FACE_BOUND('',#35273,.T.); +#35273 = EDGE_LOOP('',(#35274,#35280,#35281,#35282)); +#35274 = ORIENTED_EDGE('',*,*,#35275,.T.); +#35275 = EDGE_CURVE('',#32102,#32175,#35276,.T.); +#35276 = LINE('',#35277,#35278); +#35277 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#35278 = VECTOR('',#35279,1.); +#35279 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35280 = ORIENTED_EDGE('',*,*,#32182,.T.); +#35281 = ORIENTED_EDGE('',*,*,#35258,.F.); +#35282 = ORIENTED_EDGE('',*,*,#32109,.F.); +#35283 = PLANE('',#35284); +#35284 = AXIS2_PLACEMENT_3D('',#35285,#35286,#35287); +#35285 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#35286 = DIRECTION('',(0.,0.,1.)); +#35287 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35288 = ADVANCED_FACE('',(#35289),#35295,.T.); +#35289 = FACE_BOUND('',#35290,.T.); +#35290 = EDGE_LOOP('',(#35291,#35292,#35293,#35294)); +#35291 = ORIENTED_EDGE('',*,*,#32209,.T.); +#35292 = ORIENTED_EDGE('',*,*,#32174,.T.); +#35293 = ORIENTED_EDGE('',*,*,#35275,.F.); +#35294 = ORIENTED_EDGE('',*,*,#32101,.F.); +#35295 = PLANE('',#35296); +#35296 = AXIS2_PLACEMENT_3D('',#35297,#35298,#35299); +#35297 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#35298 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35299 = DIRECTION('',(0.,0.,-1.)); +#35300 = ADVANCED_FACE('',(#35301),#35312,.T.); +#35301 = FACE_BOUND('',#35302,.T.); +#35302 = EDGE_LOOP('',(#35303,#35309,#35310,#35311)); +#35303 = ORIENTED_EDGE('',*,*,#35304,.T.); +#35304 = EDGE_CURVE('',#32276,#32349,#35305,.T.); +#35305 = LINE('',#35306,#35307); +#35306 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#35307 = VECTOR('',#35308,1.); +#35308 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35309 = ORIENTED_EDGE('',*,*,#32356,.T.); +#35310 = ORIENTED_EDGE('',*,*,#32307,.F.); +#35311 = ORIENTED_EDGE('',*,*,#32283,.F.); +#35312 = PLANE('',#35313); +#35313 = AXIS2_PLACEMENT_3D('',#35314,#35315,#35316); +#35314 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#35315 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35316 = DIRECTION('',(0.,0.,1.)); +#35317 = ADVANCED_FACE('',(#35318),#35329,.T.); +#35318 = FACE_BOUND('',#35319,.T.); +#35319 = EDGE_LOOP('',(#35320,#35326,#35327,#35328)); +#35320 = ORIENTED_EDGE('',*,*,#35321,.T.); +#35321 = EDGE_CURVE('',#32268,#32341,#35322,.T.); +#35322 = LINE('',#35323,#35324); +#35323 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#35324 = VECTOR('',#35325,1.); +#35325 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35326 = ORIENTED_EDGE('',*,*,#32348,.T.); +#35327 = ORIENTED_EDGE('',*,*,#35304,.F.); +#35328 = ORIENTED_EDGE('',*,*,#32275,.F.); +#35329 = PLANE('',#35330); +#35330 = AXIS2_PLACEMENT_3D('',#35331,#35332,#35333); +#35331 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#35332 = DIRECTION('',(0.,0.,1.)); +#35333 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35334 = ADVANCED_FACE('',(#35335),#35341,.T.); +#35335 = FACE_BOUND('',#35336,.T.); +#35336 = EDGE_LOOP('',(#35337,#35338,#35339,#35340)); +#35337 = ORIENTED_EDGE('',*,*,#32375,.T.); +#35338 = ORIENTED_EDGE('',*,*,#32340,.T.); +#35339 = ORIENTED_EDGE('',*,*,#35321,.F.); +#35340 = ORIENTED_EDGE('',*,*,#32267,.F.); +#35341 = PLANE('',#35342); +#35342 = AXIS2_PLACEMENT_3D('',#35343,#35344,#35345); +#35343 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#35344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35345 = DIRECTION('',(0.,0.,-1.)); +#35346 = ADVANCED_FACE('',(#35347),#35358,.T.); +#35347 = FACE_BOUND('',#35348,.T.); +#35348 = EDGE_LOOP('',(#35349,#35355,#35356,#35357)); +#35349 = ORIENTED_EDGE('',*,*,#35350,.T.); +#35350 = EDGE_CURVE('',#32442,#32515,#35351,.T.); +#35351 = LINE('',#35352,#35353); +#35352 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#35353 = VECTOR('',#35354,1.); +#35354 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35355 = ORIENTED_EDGE('',*,*,#32522,.T.); +#35356 = ORIENTED_EDGE('',*,*,#32473,.F.); +#35357 = ORIENTED_EDGE('',*,*,#32449,.F.); +#35358 = PLANE('',#35359); +#35359 = AXIS2_PLACEMENT_3D('',#35360,#35361,#35362); +#35360 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#35361 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35362 = DIRECTION('',(0.,0.,1.)); +#35363 = ADVANCED_FACE('',(#35364),#35375,.T.); +#35364 = FACE_BOUND('',#35365,.T.); +#35365 = EDGE_LOOP('',(#35366,#35372,#35373,#35374)); +#35366 = ORIENTED_EDGE('',*,*,#35367,.T.); +#35367 = EDGE_CURVE('',#32434,#32507,#35368,.T.); +#35368 = LINE('',#35369,#35370); +#35369 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#35370 = VECTOR('',#35371,1.); +#35371 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35372 = ORIENTED_EDGE('',*,*,#32514,.T.); +#35373 = ORIENTED_EDGE('',*,*,#35350,.F.); +#35374 = ORIENTED_EDGE('',*,*,#32441,.F.); +#35375 = PLANE('',#35376); +#35376 = AXIS2_PLACEMENT_3D('',#35377,#35378,#35379); +#35377 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#35378 = DIRECTION('',(0.,0.,1.)); +#35379 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35380 = ADVANCED_FACE('',(#35381),#35387,.T.); +#35381 = FACE_BOUND('',#35382,.T.); +#35382 = EDGE_LOOP('',(#35383,#35384,#35385,#35386)); +#35383 = ORIENTED_EDGE('',*,*,#32541,.T.); +#35384 = ORIENTED_EDGE('',*,*,#32506,.T.); +#35385 = ORIENTED_EDGE('',*,*,#35367,.F.); +#35386 = ORIENTED_EDGE('',*,*,#32433,.F.); +#35387 = PLANE('',#35388); +#35388 = AXIS2_PLACEMENT_3D('',#35389,#35390,#35391); +#35389 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#35390 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35391 = DIRECTION('',(0.,0.,-1.)); +#35392 = ADVANCED_FACE('',(#35393),#35404,.T.); +#35393 = FACE_BOUND('',#35394,.T.); +#35394 = EDGE_LOOP('',(#35395,#35401,#35402,#35403)); +#35395 = ORIENTED_EDGE('',*,*,#35396,.T.); +#35396 = EDGE_CURVE('',#32608,#32681,#35397,.T.); +#35397 = LINE('',#35398,#35399); +#35398 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#35399 = VECTOR('',#35400,1.); +#35400 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35401 = ORIENTED_EDGE('',*,*,#32688,.T.); +#35402 = ORIENTED_EDGE('',*,*,#32639,.F.); +#35403 = ORIENTED_EDGE('',*,*,#32615,.F.); +#35404 = PLANE('',#35405); +#35405 = AXIS2_PLACEMENT_3D('',#35406,#35407,#35408); +#35406 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#35407 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35408 = DIRECTION('',(0.,0.,1.)); +#35409 = ADVANCED_FACE('',(#35410),#35421,.T.); +#35410 = FACE_BOUND('',#35411,.T.); +#35411 = EDGE_LOOP('',(#35412,#35418,#35419,#35420)); +#35412 = ORIENTED_EDGE('',*,*,#35413,.T.); +#35413 = EDGE_CURVE('',#32600,#32673,#35414,.T.); +#35414 = LINE('',#35415,#35416); +#35415 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#35416 = VECTOR('',#35417,1.); +#35417 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35418 = ORIENTED_EDGE('',*,*,#32680,.T.); +#35419 = ORIENTED_EDGE('',*,*,#35396,.F.); +#35420 = ORIENTED_EDGE('',*,*,#32607,.F.); +#35421 = PLANE('',#35422); +#35422 = AXIS2_PLACEMENT_3D('',#35423,#35424,#35425); +#35423 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#35424 = DIRECTION('',(0.,0.,1.)); +#35425 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35426 = ADVANCED_FACE('',(#35427),#35433,.T.); +#35427 = FACE_BOUND('',#35428,.T.); +#35428 = EDGE_LOOP('',(#35429,#35430,#35431,#35432)); +#35429 = ORIENTED_EDGE('',*,*,#32707,.T.); +#35430 = ORIENTED_EDGE('',*,*,#32672,.T.); +#35431 = ORIENTED_EDGE('',*,*,#35413,.F.); +#35432 = ORIENTED_EDGE('',*,*,#32599,.F.); +#35433 = PLANE('',#35434); +#35434 = AXIS2_PLACEMENT_3D('',#35435,#35436,#35437); +#35435 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#35436 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35437 = DIRECTION('',(0.,0.,-1.)); +#35438 = ADVANCED_FACE('',(#35439),#35450,.T.); +#35439 = FACE_BOUND('',#35440,.T.); +#35440 = EDGE_LOOP('',(#35441,#35447,#35448,#35449)); +#35441 = ORIENTED_EDGE('',*,*,#35442,.T.); +#35442 = EDGE_CURVE('',#32774,#32847,#35443,.T.); +#35443 = LINE('',#35444,#35445); +#35444 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#35445 = VECTOR('',#35446,1.); +#35446 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35447 = ORIENTED_EDGE('',*,*,#32854,.T.); +#35448 = ORIENTED_EDGE('',*,*,#32805,.F.); +#35449 = ORIENTED_EDGE('',*,*,#32781,.F.); +#35450 = PLANE('',#35451); +#35451 = AXIS2_PLACEMENT_3D('',#35452,#35453,#35454); +#35452 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#35453 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35454 = DIRECTION('',(0.,0.,1.)); +#35455 = ADVANCED_FACE('',(#35456),#35467,.T.); +#35456 = FACE_BOUND('',#35457,.T.); +#35457 = EDGE_LOOP('',(#35458,#35464,#35465,#35466)); +#35458 = ORIENTED_EDGE('',*,*,#35459,.T.); +#35459 = EDGE_CURVE('',#32766,#32839,#35460,.T.); +#35460 = LINE('',#35461,#35462); +#35461 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#35462 = VECTOR('',#35463,1.); +#35463 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35464 = ORIENTED_EDGE('',*,*,#32846,.T.); +#35465 = ORIENTED_EDGE('',*,*,#35442,.F.); +#35466 = ORIENTED_EDGE('',*,*,#32773,.F.); +#35467 = PLANE('',#35468); +#35468 = AXIS2_PLACEMENT_3D('',#35469,#35470,#35471); +#35469 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#35470 = DIRECTION('',(0.,0.,1.)); +#35471 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35472 = ADVANCED_FACE('',(#35473),#35479,.T.); +#35473 = FACE_BOUND('',#35474,.T.); +#35474 = EDGE_LOOP('',(#35475,#35476,#35477,#35478)); +#35475 = ORIENTED_EDGE('',*,*,#32873,.T.); +#35476 = ORIENTED_EDGE('',*,*,#32838,.T.); +#35477 = ORIENTED_EDGE('',*,*,#35459,.F.); +#35478 = ORIENTED_EDGE('',*,*,#32765,.F.); +#35479 = PLANE('',#35480); +#35480 = AXIS2_PLACEMENT_3D('',#35481,#35482,#35483); +#35481 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#35482 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35483 = DIRECTION('',(0.,0.,-1.)); +#35484 = ADVANCED_FACE('',(#35485),#35496,.T.); +#35485 = FACE_BOUND('',#35486,.T.); +#35486 = EDGE_LOOP('',(#35487,#35493,#35494,#35495)); +#35487 = ORIENTED_EDGE('',*,*,#35488,.T.); +#35488 = EDGE_CURVE('',#32940,#33013,#35489,.T.); +#35489 = LINE('',#35490,#35491); +#35490 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#35491 = VECTOR('',#35492,1.); +#35492 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35493 = ORIENTED_EDGE('',*,*,#33020,.T.); +#35494 = ORIENTED_EDGE('',*,*,#32971,.F.); +#35495 = ORIENTED_EDGE('',*,*,#32947,.F.); +#35496 = PLANE('',#35497); +#35497 = AXIS2_PLACEMENT_3D('',#35498,#35499,#35500); +#35498 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#35499 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35500 = DIRECTION('',(0.,0.,1.)); +#35501 = ADVANCED_FACE('',(#35502),#35513,.T.); +#35502 = FACE_BOUND('',#35503,.T.); +#35503 = EDGE_LOOP('',(#35504,#35510,#35511,#35512)); +#35504 = ORIENTED_EDGE('',*,*,#35505,.T.); +#35505 = EDGE_CURVE('',#32932,#33005,#35506,.T.); +#35506 = LINE('',#35507,#35508); +#35507 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#35508 = VECTOR('',#35509,1.); +#35509 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35510 = ORIENTED_EDGE('',*,*,#33012,.T.); +#35511 = ORIENTED_EDGE('',*,*,#35488,.F.); +#35512 = ORIENTED_EDGE('',*,*,#32939,.F.); +#35513 = PLANE('',#35514); +#35514 = AXIS2_PLACEMENT_3D('',#35515,#35516,#35517); +#35515 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#35516 = DIRECTION('',(0.,0.,1.)); +#35517 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35518 = ADVANCED_FACE('',(#35519),#35525,.T.); +#35519 = FACE_BOUND('',#35520,.T.); +#35520 = EDGE_LOOP('',(#35521,#35522,#35523,#35524)); +#35521 = ORIENTED_EDGE('',*,*,#33039,.T.); +#35522 = ORIENTED_EDGE('',*,*,#33004,.T.); +#35523 = ORIENTED_EDGE('',*,*,#35505,.F.); +#35524 = ORIENTED_EDGE('',*,*,#32931,.F.); +#35525 = PLANE('',#35526); +#35526 = AXIS2_PLACEMENT_3D('',#35527,#35528,#35529); +#35527 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#35528 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35529 = DIRECTION('',(0.,0.,-1.)); +#35530 = ADVANCED_FACE('',(#35531),#35542,.T.); +#35531 = FACE_BOUND('',#35532,.T.); +#35532 = EDGE_LOOP('',(#35533,#35539,#35540,#35541)); +#35533 = ORIENTED_EDGE('',*,*,#35534,.T.); +#35534 = EDGE_CURVE('',#33106,#33179,#35535,.T.); +#35535 = LINE('',#35536,#35537); +#35536 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#35537 = VECTOR('',#35538,1.); +#35538 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35539 = ORIENTED_EDGE('',*,*,#33186,.T.); +#35540 = ORIENTED_EDGE('',*,*,#33137,.F.); +#35541 = ORIENTED_EDGE('',*,*,#33113,.F.); +#35542 = PLANE('',#35543); +#35543 = AXIS2_PLACEMENT_3D('',#35544,#35545,#35546); +#35544 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#35545 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35546 = DIRECTION('',(0.,0.,1.)); +#35547 = ADVANCED_FACE('',(#35548),#35559,.T.); +#35548 = FACE_BOUND('',#35549,.T.); +#35549 = EDGE_LOOP('',(#35550,#35556,#35557,#35558)); +#35550 = ORIENTED_EDGE('',*,*,#35551,.T.); +#35551 = EDGE_CURVE('',#33098,#33171,#35552,.T.); +#35552 = LINE('',#35553,#35554); +#35553 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#35554 = VECTOR('',#35555,1.); +#35555 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35556 = ORIENTED_EDGE('',*,*,#33178,.T.); +#35557 = ORIENTED_EDGE('',*,*,#35534,.F.); +#35558 = ORIENTED_EDGE('',*,*,#33105,.F.); +#35559 = PLANE('',#35560); +#35560 = AXIS2_PLACEMENT_3D('',#35561,#35562,#35563); +#35561 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#35562 = DIRECTION('',(0.,0.,1.)); +#35563 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35564 = ADVANCED_FACE('',(#35565),#35571,.T.); +#35565 = FACE_BOUND('',#35566,.T.); +#35566 = EDGE_LOOP('',(#35567,#35568,#35569,#35570)); +#35567 = ORIENTED_EDGE('',*,*,#33205,.T.); +#35568 = ORIENTED_EDGE('',*,*,#33170,.T.); +#35569 = ORIENTED_EDGE('',*,*,#35551,.F.); +#35570 = ORIENTED_EDGE('',*,*,#33097,.F.); +#35571 = PLANE('',#35572); +#35572 = AXIS2_PLACEMENT_3D('',#35573,#35574,#35575); +#35573 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#35574 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35575 = DIRECTION('',(0.,0.,-1.)); +#35576 = ADVANCED_FACE('',(#35577),#35588,.T.); +#35577 = FACE_BOUND('',#35578,.T.); +#35578 = EDGE_LOOP('',(#35579,#35585,#35586,#35587)); +#35579 = ORIENTED_EDGE('',*,*,#35580,.T.); +#35580 = EDGE_CURVE('',#33272,#33345,#35581,.T.); +#35581 = LINE('',#35582,#35583); +#35582 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#35583 = VECTOR('',#35584,1.); +#35584 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35585 = ORIENTED_EDGE('',*,*,#33352,.T.); +#35586 = ORIENTED_EDGE('',*,*,#33303,.F.); +#35587 = ORIENTED_EDGE('',*,*,#33279,.F.); +#35588 = PLANE('',#35589); +#35589 = AXIS2_PLACEMENT_3D('',#35590,#35591,#35592); +#35590 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#35591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35592 = DIRECTION('',(0.,0.,1.)); +#35593 = ADVANCED_FACE('',(#35594),#35605,.T.); +#35594 = FACE_BOUND('',#35595,.T.); +#35595 = EDGE_LOOP('',(#35596,#35602,#35603,#35604)); +#35596 = ORIENTED_EDGE('',*,*,#35597,.T.); +#35597 = EDGE_CURVE('',#33264,#33337,#35598,.T.); +#35598 = LINE('',#35599,#35600); +#35599 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#35600 = VECTOR('',#35601,1.); +#35601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35602 = ORIENTED_EDGE('',*,*,#33344,.T.); +#35603 = ORIENTED_EDGE('',*,*,#35580,.F.); +#35604 = ORIENTED_EDGE('',*,*,#33271,.F.); +#35605 = PLANE('',#35606); +#35606 = AXIS2_PLACEMENT_3D('',#35607,#35608,#35609); +#35607 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#35608 = DIRECTION('',(0.,0.,1.)); +#35609 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35610 = ADVANCED_FACE('',(#35611),#35617,.T.); +#35611 = FACE_BOUND('',#35612,.T.); +#35612 = EDGE_LOOP('',(#35613,#35614,#35615,#35616)); +#35613 = ORIENTED_EDGE('',*,*,#33371,.T.); +#35614 = ORIENTED_EDGE('',*,*,#33336,.T.); +#35615 = ORIENTED_EDGE('',*,*,#35597,.F.); +#35616 = ORIENTED_EDGE('',*,*,#33263,.F.); +#35617 = PLANE('',#35618); +#35618 = AXIS2_PLACEMENT_3D('',#35619,#35620,#35621); +#35619 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#35620 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35621 = DIRECTION('',(0.,0.,-1.)); +#35622 = ADVANCED_FACE('',(#35623),#35634,.T.); +#35623 = FACE_BOUND('',#35624,.T.); +#35624 = EDGE_LOOP('',(#35625,#35631,#35632,#35633)); +#35625 = ORIENTED_EDGE('',*,*,#35626,.T.); +#35626 = EDGE_CURVE('',#33438,#33511,#35627,.T.); +#35627 = LINE('',#35628,#35629); +#35628 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#35629 = VECTOR('',#35630,1.); +#35630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35631 = ORIENTED_EDGE('',*,*,#33518,.T.); +#35632 = ORIENTED_EDGE('',*,*,#33469,.F.); +#35633 = ORIENTED_EDGE('',*,*,#33445,.F.); +#35634 = PLANE('',#35635); +#35635 = AXIS2_PLACEMENT_3D('',#35636,#35637,#35638); +#35636 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#35637 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35638 = DIRECTION('',(0.,0.,1.)); +#35639 = ADVANCED_FACE('',(#35640),#35651,.T.); +#35640 = FACE_BOUND('',#35641,.T.); +#35641 = EDGE_LOOP('',(#35642,#35648,#35649,#35650)); +#35642 = ORIENTED_EDGE('',*,*,#35643,.T.); +#35643 = EDGE_CURVE('',#33430,#33503,#35644,.T.); +#35644 = LINE('',#35645,#35646); +#35645 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#35646 = VECTOR('',#35647,1.); +#35647 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35648 = ORIENTED_EDGE('',*,*,#33510,.T.); +#35649 = ORIENTED_EDGE('',*,*,#35626,.F.); +#35650 = ORIENTED_EDGE('',*,*,#33437,.F.); +#35651 = PLANE('',#35652); +#35652 = AXIS2_PLACEMENT_3D('',#35653,#35654,#35655); +#35653 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#35654 = DIRECTION('',(0.,0.,1.)); +#35655 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35656 = ADVANCED_FACE('',(#35657),#35663,.T.); +#35657 = FACE_BOUND('',#35658,.T.); +#35658 = EDGE_LOOP('',(#35659,#35660,#35661,#35662)); +#35659 = ORIENTED_EDGE('',*,*,#33537,.T.); +#35660 = ORIENTED_EDGE('',*,*,#33502,.T.); +#35661 = ORIENTED_EDGE('',*,*,#35643,.F.); +#35662 = ORIENTED_EDGE('',*,*,#33429,.F.); +#35663 = PLANE('',#35664); +#35664 = AXIS2_PLACEMENT_3D('',#35665,#35666,#35667); +#35665 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#35666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35667 = DIRECTION('',(0.,0.,-1.)); +#35668 = ADVANCED_FACE('',(#35669),#35680,.T.); +#35669 = FACE_BOUND('',#35670,.T.); +#35670 = EDGE_LOOP('',(#35671,#35677,#35678,#35679)); +#35671 = ORIENTED_EDGE('',*,*,#35672,.T.); +#35672 = EDGE_CURVE('',#33604,#33677,#35673,.T.); +#35673 = LINE('',#35674,#35675); +#35674 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#35675 = VECTOR('',#35676,1.); +#35676 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35677 = ORIENTED_EDGE('',*,*,#33684,.T.); +#35678 = ORIENTED_EDGE('',*,*,#33635,.F.); +#35679 = ORIENTED_EDGE('',*,*,#33611,.F.); +#35680 = PLANE('',#35681); +#35681 = AXIS2_PLACEMENT_3D('',#35682,#35683,#35684); +#35682 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#35683 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35684 = DIRECTION('',(0.,0.,1.)); +#35685 = ADVANCED_FACE('',(#35686),#35697,.T.); +#35686 = FACE_BOUND('',#35687,.T.); +#35687 = EDGE_LOOP('',(#35688,#35694,#35695,#35696)); +#35688 = ORIENTED_EDGE('',*,*,#35689,.T.); +#35689 = EDGE_CURVE('',#33596,#33669,#35690,.T.); +#35690 = LINE('',#35691,#35692); +#35691 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#35692 = VECTOR('',#35693,1.); +#35693 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35694 = ORIENTED_EDGE('',*,*,#33676,.T.); +#35695 = ORIENTED_EDGE('',*,*,#35672,.F.); +#35696 = ORIENTED_EDGE('',*,*,#33603,.F.); +#35697 = PLANE('',#35698); +#35698 = AXIS2_PLACEMENT_3D('',#35699,#35700,#35701); +#35699 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#35700 = DIRECTION('',(0.,0.,1.)); +#35701 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35702 = ADVANCED_FACE('',(#35703),#35709,.T.); +#35703 = FACE_BOUND('',#35704,.T.); +#35704 = EDGE_LOOP('',(#35705,#35706,#35707,#35708)); +#35705 = ORIENTED_EDGE('',*,*,#33703,.T.); +#35706 = ORIENTED_EDGE('',*,*,#33668,.T.); +#35707 = ORIENTED_EDGE('',*,*,#35689,.F.); +#35708 = ORIENTED_EDGE('',*,*,#33595,.F.); +#35709 = PLANE('',#35710); +#35710 = AXIS2_PLACEMENT_3D('',#35711,#35712,#35713); +#35711 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#35712 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35713 = DIRECTION('',(0.,0.,-1.)); +#35714 = ADVANCED_FACE('',(#35715),#35726,.T.); +#35715 = FACE_BOUND('',#35716,.T.); +#35716 = EDGE_LOOP('',(#35717,#35723,#35724,#35725)); +#35717 = ORIENTED_EDGE('',*,*,#35718,.T.); +#35718 = EDGE_CURVE('',#33770,#33843,#35719,.T.); +#35719 = LINE('',#35720,#35721); +#35720 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#35721 = VECTOR('',#35722,1.); +#35722 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35723 = ORIENTED_EDGE('',*,*,#33850,.T.); +#35724 = ORIENTED_EDGE('',*,*,#33801,.F.); +#35725 = ORIENTED_EDGE('',*,*,#33777,.F.); +#35726 = PLANE('',#35727); +#35727 = AXIS2_PLACEMENT_3D('',#35728,#35729,#35730); +#35728 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#35729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35730 = DIRECTION('',(0.,0.,1.)); +#35731 = ADVANCED_FACE('',(#35732),#35743,.T.); +#35732 = FACE_BOUND('',#35733,.T.); +#35733 = EDGE_LOOP('',(#35734,#35740,#35741,#35742)); +#35734 = ORIENTED_EDGE('',*,*,#35735,.T.); +#35735 = EDGE_CURVE('',#33762,#33835,#35736,.T.); +#35736 = LINE('',#35737,#35738); +#35737 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#35738 = VECTOR('',#35739,1.); +#35739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35740 = ORIENTED_EDGE('',*,*,#33842,.T.); +#35741 = ORIENTED_EDGE('',*,*,#35718,.F.); +#35742 = ORIENTED_EDGE('',*,*,#33769,.F.); +#35743 = PLANE('',#35744); +#35744 = AXIS2_PLACEMENT_3D('',#35745,#35746,#35747); +#35745 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#35746 = DIRECTION('',(0.,0.,1.)); +#35747 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35748 = ADVANCED_FACE('',(#35749),#35755,.T.); +#35749 = FACE_BOUND('',#35750,.T.); +#35750 = EDGE_LOOP('',(#35751,#35752,#35753,#35754)); +#35751 = ORIENTED_EDGE('',*,*,#33869,.T.); +#35752 = ORIENTED_EDGE('',*,*,#33834,.T.); +#35753 = ORIENTED_EDGE('',*,*,#35735,.F.); +#35754 = ORIENTED_EDGE('',*,*,#33761,.F.); +#35755 = PLANE('',#35756); +#35756 = AXIS2_PLACEMENT_3D('',#35757,#35758,#35759); +#35757 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#35758 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35759 = DIRECTION('',(0.,0.,-1.)); +#35760 = ADVANCED_FACE('',(#35761),#35772,.T.); +#35761 = FACE_BOUND('',#35762,.T.); +#35762 = EDGE_LOOP('',(#35763,#35769,#35770,#35771)); +#35763 = ORIENTED_EDGE('',*,*,#35764,.T.); +#35764 = EDGE_CURVE('',#33936,#34009,#35765,.T.); +#35765 = LINE('',#35766,#35767); +#35766 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#35767 = VECTOR('',#35768,1.); +#35768 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35769 = ORIENTED_EDGE('',*,*,#34016,.T.); +#35770 = ORIENTED_EDGE('',*,*,#33967,.F.); +#35771 = ORIENTED_EDGE('',*,*,#33943,.F.); +#35772 = PLANE('',#35773); +#35773 = AXIS2_PLACEMENT_3D('',#35774,#35775,#35776); +#35774 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#35775 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35776 = DIRECTION('',(0.,0.,1.)); +#35777 = ADVANCED_FACE('',(#35778),#35789,.T.); +#35778 = FACE_BOUND('',#35779,.T.); +#35779 = EDGE_LOOP('',(#35780,#35786,#35787,#35788)); +#35780 = ORIENTED_EDGE('',*,*,#35781,.T.); +#35781 = EDGE_CURVE('',#33928,#34001,#35782,.T.); +#35782 = LINE('',#35783,#35784); +#35783 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#35784 = VECTOR('',#35785,1.); +#35785 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35786 = ORIENTED_EDGE('',*,*,#34008,.T.); +#35787 = ORIENTED_EDGE('',*,*,#35764,.F.); +#35788 = ORIENTED_EDGE('',*,*,#33935,.F.); +#35789 = PLANE('',#35790); +#35790 = AXIS2_PLACEMENT_3D('',#35791,#35792,#35793); +#35791 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#35792 = DIRECTION('',(0.,0.,1.)); +#35793 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35794 = ADVANCED_FACE('',(#35795),#35801,.T.); +#35795 = FACE_BOUND('',#35796,.T.); +#35796 = EDGE_LOOP('',(#35797,#35798,#35799,#35800)); +#35797 = ORIENTED_EDGE('',*,*,#34035,.T.); +#35798 = ORIENTED_EDGE('',*,*,#34000,.T.); +#35799 = ORIENTED_EDGE('',*,*,#35781,.F.); +#35800 = ORIENTED_EDGE('',*,*,#33927,.F.); +#35801 = PLANE('',#35802); +#35802 = AXIS2_PLACEMENT_3D('',#35803,#35804,#35805); +#35803 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#35804 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35805 = DIRECTION('',(0.,0.,-1.)); +#35806 = ADVANCED_FACE('',(#35807),#35818,.T.); +#35807 = FACE_BOUND('',#35808,.T.); +#35808 = EDGE_LOOP('',(#35809,#35815,#35816,#35817)); +#35809 = ORIENTED_EDGE('',*,*,#35810,.T.); +#35810 = EDGE_CURVE('',#34102,#34175,#35811,.T.); +#35811 = LINE('',#35812,#35813); +#35812 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#35813 = VECTOR('',#35814,1.); +#35814 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35815 = ORIENTED_EDGE('',*,*,#34182,.T.); +#35816 = ORIENTED_EDGE('',*,*,#34133,.F.); +#35817 = ORIENTED_EDGE('',*,*,#34109,.F.); +#35818 = PLANE('',#35819); +#35819 = AXIS2_PLACEMENT_3D('',#35820,#35821,#35822); +#35820 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#35821 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35822 = DIRECTION('',(0.,0.,1.)); +#35823 = ADVANCED_FACE('',(#35824),#35835,.T.); +#35824 = FACE_BOUND('',#35825,.T.); +#35825 = EDGE_LOOP('',(#35826,#35832,#35833,#35834)); +#35826 = ORIENTED_EDGE('',*,*,#35827,.T.); +#35827 = EDGE_CURVE('',#34094,#34167,#35828,.T.); +#35828 = LINE('',#35829,#35830); +#35829 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#35830 = VECTOR('',#35831,1.); +#35831 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35832 = ORIENTED_EDGE('',*,*,#34174,.T.); +#35833 = ORIENTED_EDGE('',*,*,#35810,.F.); +#35834 = ORIENTED_EDGE('',*,*,#34101,.F.); +#35835 = PLANE('',#35836); +#35836 = AXIS2_PLACEMENT_3D('',#35837,#35838,#35839); +#35837 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#35838 = DIRECTION('',(0.,0.,1.)); +#35839 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35840 = ADVANCED_FACE('',(#35841),#35847,.T.); +#35841 = FACE_BOUND('',#35842,.T.); +#35842 = EDGE_LOOP('',(#35843,#35844,#35845,#35846)); +#35843 = ORIENTED_EDGE('',*,*,#34201,.T.); +#35844 = ORIENTED_EDGE('',*,*,#34166,.T.); +#35845 = ORIENTED_EDGE('',*,*,#35827,.F.); +#35846 = ORIENTED_EDGE('',*,*,#34093,.F.); +#35847 = PLANE('',#35848); +#35848 = AXIS2_PLACEMENT_3D('',#35849,#35850,#35851); +#35849 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#35850 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35851 = DIRECTION('',(0.,0.,-1.)); +#35852 = ADVANCED_FACE('',(#35853),#35864,.T.); +#35853 = FACE_BOUND('',#35854,.T.); +#35854 = EDGE_LOOP('',(#35855,#35861,#35862,#35863)); +#35855 = ORIENTED_EDGE('',*,*,#35856,.T.); +#35856 = EDGE_CURVE('',#34268,#34341,#35857,.T.); +#35857 = LINE('',#35858,#35859); +#35858 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#35859 = VECTOR('',#35860,1.); +#35860 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35861 = ORIENTED_EDGE('',*,*,#34348,.T.); +#35862 = ORIENTED_EDGE('',*,*,#34299,.F.); +#35863 = ORIENTED_EDGE('',*,*,#34275,.F.); +#35864 = PLANE('',#35865); +#35865 = AXIS2_PLACEMENT_3D('',#35866,#35867,#35868); +#35866 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#35867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35868 = DIRECTION('',(0.,0.,1.)); +#35869 = ADVANCED_FACE('',(#35870),#35881,.T.); +#35870 = FACE_BOUND('',#35871,.T.); +#35871 = EDGE_LOOP('',(#35872,#35878,#35879,#35880)); +#35872 = ORIENTED_EDGE('',*,*,#35873,.T.); +#35873 = EDGE_CURVE('',#34260,#34333,#35874,.T.); +#35874 = LINE('',#35875,#35876); +#35875 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#35876 = VECTOR('',#35877,1.); +#35877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35878 = ORIENTED_EDGE('',*,*,#34340,.T.); +#35879 = ORIENTED_EDGE('',*,*,#35856,.F.); +#35880 = ORIENTED_EDGE('',*,*,#34267,.F.); +#35881 = PLANE('',#35882); +#35882 = AXIS2_PLACEMENT_3D('',#35883,#35884,#35885); +#35883 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#35884 = DIRECTION('',(0.,0.,1.)); +#35885 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35886 = ADVANCED_FACE('',(#35887),#35893,.T.); +#35887 = FACE_BOUND('',#35888,.T.); +#35888 = EDGE_LOOP('',(#35889,#35890,#35891,#35892)); +#35889 = ORIENTED_EDGE('',*,*,#34367,.T.); +#35890 = ORIENTED_EDGE('',*,*,#34332,.T.); +#35891 = ORIENTED_EDGE('',*,*,#35873,.F.); +#35892 = ORIENTED_EDGE('',*,*,#34259,.F.); +#35893 = PLANE('',#35894); +#35894 = AXIS2_PLACEMENT_3D('',#35895,#35896,#35897); +#35895 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#35896 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35897 = DIRECTION('',(0.,0.,-1.)); +#35898 = ADVANCED_FACE('',(#35899),#35910,.T.); +#35899 = FACE_BOUND('',#35900,.T.); +#35900 = EDGE_LOOP('',(#35901,#35907,#35908,#35909)); +#35901 = ORIENTED_EDGE('',*,*,#35902,.T.); +#35902 = EDGE_CURVE('',#34434,#34507,#35903,.T.); +#35903 = LINE('',#35904,#35905); +#35904 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#35905 = VECTOR('',#35906,1.); +#35906 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35907 = ORIENTED_EDGE('',*,*,#34514,.T.); +#35908 = ORIENTED_EDGE('',*,*,#34465,.F.); +#35909 = ORIENTED_EDGE('',*,*,#34441,.F.); +#35910 = PLANE('',#35911); +#35911 = AXIS2_PLACEMENT_3D('',#35912,#35913,#35914); +#35912 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#35913 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35914 = DIRECTION('',(0.,0.,1.)); +#35915 = ADVANCED_FACE('',(#35916),#35927,.T.); +#35916 = FACE_BOUND('',#35917,.T.); +#35917 = EDGE_LOOP('',(#35918,#35924,#35925,#35926)); +#35918 = ORIENTED_EDGE('',*,*,#35919,.T.); +#35919 = EDGE_CURVE('',#34426,#34499,#35920,.T.); +#35920 = LINE('',#35921,#35922); +#35921 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#35922 = VECTOR('',#35923,1.); +#35923 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35924 = ORIENTED_EDGE('',*,*,#34506,.T.); +#35925 = ORIENTED_EDGE('',*,*,#35902,.F.); +#35926 = ORIENTED_EDGE('',*,*,#34433,.F.); +#35927 = PLANE('',#35928); +#35928 = AXIS2_PLACEMENT_3D('',#35929,#35930,#35931); +#35929 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#35930 = DIRECTION('',(0.,0.,1.)); +#35931 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35932 = ADVANCED_FACE('',(#35933),#35939,.T.); +#35933 = FACE_BOUND('',#35934,.T.); +#35934 = EDGE_LOOP('',(#35935,#35936,#35937,#35938)); +#35935 = ORIENTED_EDGE('',*,*,#34533,.T.); +#35936 = ORIENTED_EDGE('',*,*,#34498,.T.); +#35937 = ORIENTED_EDGE('',*,*,#35919,.F.); +#35938 = ORIENTED_EDGE('',*,*,#34425,.F.); +#35939 = PLANE('',#35940); +#35940 = AXIS2_PLACEMENT_3D('',#35941,#35942,#35943); +#35941 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#35942 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35943 = DIRECTION('',(0.,0.,-1.)); +#35944 = ADVANCED_FACE('',(#35945),#35956,.T.); +#35945 = FACE_BOUND('',#35946,.T.); +#35946 = EDGE_LOOP('',(#35947,#35953,#35954,#35955)); +#35947 = ORIENTED_EDGE('',*,*,#35948,.T.); +#35948 = EDGE_CURVE('',#34600,#34673,#35949,.T.); +#35949 = LINE('',#35950,#35951); +#35950 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#35951 = VECTOR('',#35952,1.); +#35952 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35953 = ORIENTED_EDGE('',*,*,#34680,.T.); +#35954 = ORIENTED_EDGE('',*,*,#34631,.F.); +#35955 = ORIENTED_EDGE('',*,*,#34607,.F.); +#35956 = PLANE('',#35957); +#35957 = AXIS2_PLACEMENT_3D('',#35958,#35959,#35960); +#35958 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#35959 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35960 = DIRECTION('',(0.,0.,1.)); +#35961 = ADVANCED_FACE('',(#35962),#35973,.T.); +#35962 = FACE_BOUND('',#35963,.T.); +#35963 = EDGE_LOOP('',(#35964,#35970,#35971,#35972)); +#35964 = ORIENTED_EDGE('',*,*,#35965,.T.); +#35965 = EDGE_CURVE('',#34592,#34665,#35966,.T.); +#35966 = LINE('',#35967,#35968); +#35967 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#35968 = VECTOR('',#35969,1.); +#35969 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35970 = ORIENTED_EDGE('',*,*,#34672,.T.); +#35971 = ORIENTED_EDGE('',*,*,#35948,.F.); +#35972 = ORIENTED_EDGE('',*,*,#34599,.F.); +#35973 = PLANE('',#35974); +#35974 = AXIS2_PLACEMENT_3D('',#35975,#35976,#35977); +#35975 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#35976 = DIRECTION('',(0.,0.,1.)); +#35977 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35978 = ADVANCED_FACE('',(#35979),#35985,.T.); +#35979 = FACE_BOUND('',#35980,.T.); +#35980 = EDGE_LOOP('',(#35981,#35982,#35983,#35984)); +#35981 = ORIENTED_EDGE('',*,*,#34699,.T.); +#35982 = ORIENTED_EDGE('',*,*,#34664,.T.); +#35983 = ORIENTED_EDGE('',*,*,#35965,.F.); +#35984 = ORIENTED_EDGE('',*,*,#34591,.F.); +#35985 = PLANE('',#35986); +#35986 = AXIS2_PLACEMENT_3D('',#35987,#35988,#35989); +#35987 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#35988 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35989 = DIRECTION('',(0.,0.,-1.)); +#35990 = ADVANCED_FACE('',(#35991),#36002,.T.); +#35991 = FACE_BOUND('',#35992,.T.); +#35992 = EDGE_LOOP('',(#35993,#35999,#36000,#36001)); +#35993 = ORIENTED_EDGE('',*,*,#35994,.T.); +#35994 = EDGE_CURVE('',#34766,#34839,#35995,.T.); +#35995 = LINE('',#35996,#35997); +#35996 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#35997 = VECTOR('',#35998,1.); +#35998 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35999 = ORIENTED_EDGE('',*,*,#34846,.T.); +#36000 = ORIENTED_EDGE('',*,*,#34797,.F.); +#36001 = ORIENTED_EDGE('',*,*,#34773,.F.); +#36002 = PLANE('',#36003); +#36003 = AXIS2_PLACEMENT_3D('',#36004,#36005,#36006); +#36004 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#36005 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#36006 = DIRECTION('',(0.,0.,1.)); +#36007 = ADVANCED_FACE('',(#36008),#36019,.T.); +#36008 = FACE_BOUND('',#36009,.T.); +#36009 = EDGE_LOOP('',(#36010,#36016,#36017,#36018)); +#36010 = ORIENTED_EDGE('',*,*,#36011,.T.); +#36011 = EDGE_CURVE('',#34758,#34831,#36012,.T.); +#36012 = LINE('',#36013,#36014); +#36013 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#36014 = VECTOR('',#36015,1.); +#36015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36016 = ORIENTED_EDGE('',*,*,#34838,.T.); +#36017 = ORIENTED_EDGE('',*,*,#35994,.F.); +#36018 = ORIENTED_EDGE('',*,*,#34765,.F.); +#36019 = PLANE('',#36020); +#36020 = AXIS2_PLACEMENT_3D('',#36021,#36022,#36023); +#36021 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#36022 = DIRECTION('',(0.,0.,1.)); +#36023 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#36024 = ADVANCED_FACE('',(#36025),#36031,.T.); +#36025 = FACE_BOUND('',#36026,.T.); +#36026 = EDGE_LOOP('',(#36027,#36028,#36029,#36030)); +#36027 = ORIENTED_EDGE('',*,*,#34865,.T.); +#36028 = ORIENTED_EDGE('',*,*,#34830,.T.); +#36029 = ORIENTED_EDGE('',*,*,#36011,.F.); +#36030 = ORIENTED_EDGE('',*,*,#34757,.F.); +#36031 = PLANE('',#36032); +#36032 = AXIS2_PLACEMENT_3D('',#36033,#36034,#36035); +#36033 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#36034 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#36035 = DIRECTION('',(0.,0.,-1.)); +#36036 = ADVANCED_FACE('',(#36037),#36048,.T.); +#36037 = FACE_BOUND('',#36038,.T.); +#36038 = EDGE_LOOP('',(#36039,#36045,#36046,#36047)); +#36039 = ORIENTED_EDGE('',*,*,#36040,.T.); +#36040 = EDGE_CURVE('',#34932,#35005,#36041,.T.); +#36041 = LINE('',#36042,#36043); +#36042 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#36043 = VECTOR('',#36044,1.); +#36044 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36045 = ORIENTED_EDGE('',*,*,#35012,.T.); +#36046 = ORIENTED_EDGE('',*,*,#34963,.F.); +#36047 = ORIENTED_EDGE('',*,*,#34939,.F.); +#36048 = PLANE('',#36049); +#36049 = AXIS2_PLACEMENT_3D('',#36050,#36051,#36052); +#36050 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#36051 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#36052 = DIRECTION('',(0.,0.,1.)); +#36053 = ADVANCED_FACE('',(#36054),#36065,.T.); +#36054 = FACE_BOUND('',#36055,.T.); +#36055 = EDGE_LOOP('',(#36056,#36062,#36063,#36064)); +#36056 = ORIENTED_EDGE('',*,*,#36057,.T.); +#36057 = EDGE_CURVE('',#34924,#34997,#36058,.T.); +#36058 = LINE('',#36059,#36060); +#36059 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#36060 = VECTOR('',#36061,1.); +#36061 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36062 = ORIENTED_EDGE('',*,*,#35004,.T.); +#36063 = ORIENTED_EDGE('',*,*,#36040,.F.); +#36064 = ORIENTED_EDGE('',*,*,#34931,.F.); +#36065 = PLANE('',#36066); +#36066 = AXIS2_PLACEMENT_3D('',#36067,#36068,#36069); +#36067 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#36068 = DIRECTION('',(0.,0.,1.)); +#36069 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#36070 = ADVANCED_FACE('',(#36071),#36077,.T.); +#36071 = FACE_BOUND('',#36072,.T.); +#36072 = EDGE_LOOP('',(#36073,#36074,#36075,#36076)); +#36073 = ORIENTED_EDGE('',*,*,#35031,.T.); +#36074 = ORIENTED_EDGE('',*,*,#34996,.T.); +#36075 = ORIENTED_EDGE('',*,*,#36057,.F.); +#36076 = ORIENTED_EDGE('',*,*,#34923,.F.); +#36077 = PLANE('',#36078); +#36078 = AXIS2_PLACEMENT_3D('',#36079,#36080,#36081); +#36079 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#36080 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#36081 = DIRECTION('',(0.,0.,-1.)); +#36082 = ADVANCED_FACE('',(#36083),#36094,.T.); +#36083 = FACE_BOUND('',#36084,.T.); +#36084 = EDGE_LOOP('',(#36085,#36091,#36092,#36093)); +#36085 = ORIENTED_EDGE('',*,*,#36086,.T.); +#36086 = EDGE_CURVE('',#35098,#35171,#36087,.T.); +#36087 = LINE('',#36088,#36089); +#36088 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#36089 = VECTOR('',#36090,1.); +#36090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36091 = ORIENTED_EDGE('',*,*,#35178,.T.); +#36092 = ORIENTED_EDGE('',*,*,#35129,.F.); +#36093 = ORIENTED_EDGE('',*,*,#35105,.F.); +#36094 = PLANE('',#36095); +#36095 = AXIS2_PLACEMENT_3D('',#36096,#36097,#36098); +#36096 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#36097 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#36098 = DIRECTION('',(0.,0.,1.)); +#36099 = ADVANCED_FACE('',(#36100),#36111,.T.); +#36100 = FACE_BOUND('',#36101,.T.); +#36101 = EDGE_LOOP('',(#36102,#36108,#36109,#36110)); +#36102 = ORIENTED_EDGE('',*,*,#36103,.T.); +#36103 = EDGE_CURVE('',#35090,#35163,#36104,.T.); +#36104 = LINE('',#36105,#36106); +#36105 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#36106 = VECTOR('',#36107,1.); +#36107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36108 = ORIENTED_EDGE('',*,*,#35170,.T.); +#36109 = ORIENTED_EDGE('',*,*,#36086,.F.); +#36110 = ORIENTED_EDGE('',*,*,#35097,.F.); +#36111 = PLANE('',#36112); +#36112 = AXIS2_PLACEMENT_3D('',#36113,#36114,#36115); +#36113 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#36114 = DIRECTION('',(0.,0.,1.)); +#36115 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#36116 = ADVANCED_FACE('',(#36117),#36123,.T.); +#36117 = FACE_BOUND('',#36118,.T.); +#36118 = EDGE_LOOP('',(#36119,#36120,#36121,#36122)); +#36119 = ORIENTED_EDGE('',*,*,#35197,.T.); +#36120 = ORIENTED_EDGE('',*,*,#35162,.T.); +#36121 = ORIENTED_EDGE('',*,*,#36103,.F.); +#36122 = ORIENTED_EDGE('',*,*,#35089,.F.); +#36123 = PLANE('',#36124); +#36124 = AXIS2_PLACEMENT_3D('',#36125,#36126,#36127); +#36125 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#36126 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#36127 = DIRECTION('',(0.,0.,-1.)); +#36128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#36132)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#36129,#36130,#36131)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#36129 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#36130 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#36131 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#36132 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#36129, + 'distance_accuracy_value','confusion accuracy'); +#36133 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36134,#36136); +#36134 = ( REPRESENTATION_RELATIONSHIP('','',#20325,#20302) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36135) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36135 = ITEM_DEFINED_TRANSFORMATION('','',#11,#20303); +#36136 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36137); +#36137 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('21','=>[0:1:1:19]','',#20297, + #20320,$); +#36138 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20322)); +#36139 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36140,#36142); +#36140 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36141) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36141 = ITEM_DEFINED_TRANSFORMATION('','',#11,#67); +#36142 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36143); +#36143 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('23','Ccomp2','',#5,#14742,$); +#36144 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36145,#36147); +#36145 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36146) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36146 = ITEM_DEFINED_TRANSFORMATION('','',#11,#71); +#36147 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36148); +#36148 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('24','R5','',#5,#523,$); +#36149 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36150,#36152); +#36150 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36151) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36151 = ITEM_DEFINED_TRANSFORMATION('','',#11,#75); +#36152 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36153); +#36153 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('25','P11','',#5,#11985,$); +#36154 = SHAPE_DEFINITION_REPRESENTATION(#36155,#36161); +#36155 = PRODUCT_DEFINITION_SHAPE('','',#36156); +#36156 = PRODUCT_DEFINITION('design','',#36157,#36160); +#36157 = PRODUCT_DEFINITION_FORMATION('','',#36158); +#36158 = PRODUCT('SOT-23','SOT-23','',(#36159)); +#36159 = PRODUCT_CONTEXT('',#2,'mechanical'); +#36160 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#36161 = SHAPE_REPRESENTATION('',(#11,#36162),#36166); +#36162 = AXIS2_PLACEMENT_3D('',#36163,#36164,#36165); +#36163 = CARTESIAN_POINT('',(0.,0.,0.)); +#36164 = DIRECTION('',(0.,0.,1.)); +#36165 = DIRECTION('',(1.,0.,-0.)); +#36166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#36170)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#36167,#36168,#36169)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#36167 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#36168 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#36169 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#36170 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#36167, + 'distance_accuracy_value','confusion accuracy'); +#36171 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36172,#36174); +#36172 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36173) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36173 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79); +#36174 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36175); +#36175 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','Q1','',#5,#36156,$); +#36176 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#36158)); +#36177 = SHAPE_DEFINITION_REPRESENTATION(#36178,#36184); +#36178 = PRODUCT_DEFINITION_SHAPE('','',#36179); +#36179 = PRODUCT_DEFINITION('design','',#36180,#36183); +#36180 = PRODUCT_DEFINITION_FORMATION('','',#36181); +#36181 = PRODUCT('SOT-23','SOT-23','',(#36182)); +#36182 = PRODUCT_CONTEXT('',#2,'mechanical'); +#36183 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#36184 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#36185),#38167); +#36185 = MANIFOLD_SOLID_BREP('',#36186); +#36186 = CLOSED_SHELL('',(#36187,#36225,#36288,#36311,#36340,#36363, + #36418,#36457,#36480,#36503,#36520,#36543,#36631,#36647,#36677, + #36710,#36741,#36774,#36791,#36808,#36841,#36871,#36894,#36917, + #36934,#36963,#37017,#37040,#37063,#37086,#37125,#37147,#37191, + #37266,#37290,#37358,#37375,#37450,#37474,#37542,#37617,#37641, + #37709,#37726,#37743,#37789,#37805,#37821,#37838,#37850,#37867, + #37884,#37901,#37918,#37935,#37952,#37964,#37981,#37998,#38015, + #38032,#38049,#38061,#38078,#38095,#38112,#38129,#38146,#38158)); +#36187 = ADVANCED_FACE('',(#36188),#36220,.F.); +#36188 = FACE_BOUND('',#36189,.F.); +#36189 = EDGE_LOOP('',(#36190,#36200,#36207,#36215)); +#36190 = ORIENTED_EDGE('',*,*,#36191,.T.); +#36191 = EDGE_CURVE('',#36192,#36194,#36196,.T.); +#36192 = VERTEX_POINT('',#36193); +#36193 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36194 = VERTEX_POINT('',#36195); +#36195 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36196 = LINE('',#36197,#36198); +#36197 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36198 = VECTOR('',#36199,1.); +#36199 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36200 = ORIENTED_EDGE('',*,*,#36201,.T.); +#36201 = EDGE_CURVE('',#36194,#36202,#36204,.T.); +#36202 = VERTEX_POINT('',#36203); +#36203 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36204 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36205,#36206),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36205 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36206 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36207 = ORIENTED_EDGE('',*,*,#36208,.F.); +#36208 = EDGE_CURVE('',#36209,#36202,#36211,.T.); +#36209 = VERTEX_POINT('',#36210); +#36210 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36211 = LINE('',#36212,#36213); +#36212 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36213 = VECTOR('',#36214,1.); +#36214 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36215 = ORIENTED_EDGE('',*,*,#36216,.F.); +#36216 = EDGE_CURVE('',#36192,#36209,#36217,.T.); +#36217 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36218,#36219),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36218 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36219 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36220 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36221,#36222) + ,(#36223,#36224 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36221 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36222 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36223 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36224 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36225 = ADVANCED_FACE('',(#36226),#36283,.T.); +#36226 = FACE_BOUND('',#36227,.T.); +#36227 = EDGE_LOOP('',(#36228,#36229,#36237,#36245,#36253,#36261,#36269, + #36277)); +#36228 = ORIENTED_EDGE('',*,*,#36191,.T.); +#36229 = ORIENTED_EDGE('',*,*,#36230,.T.); +#36230 = EDGE_CURVE('',#36194,#36231,#36233,.T.); +#36231 = VERTEX_POINT('',#36232); +#36232 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36233 = LINE('',#36234,#36235); +#36234 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36235 = VECTOR('',#36236,1.); +#36236 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36237 = ORIENTED_EDGE('',*,*,#36238,.T.); +#36238 = EDGE_CURVE('',#36231,#36239,#36241,.T.); +#36239 = VERTEX_POINT('',#36240); +#36240 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36241 = LINE('',#36242,#36243); +#36242 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36243 = VECTOR('',#36244,1.); +#36244 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36245 = ORIENTED_EDGE('',*,*,#36246,.T.); +#36246 = EDGE_CURVE('',#36239,#36247,#36249,.T.); +#36247 = VERTEX_POINT('',#36248); +#36248 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36249 = LINE('',#36250,#36251); +#36250 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36251 = VECTOR('',#36252,1.); +#36252 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36253 = ORIENTED_EDGE('',*,*,#36254,.T.); +#36254 = EDGE_CURVE('',#36247,#36255,#36257,.T.); +#36255 = VERTEX_POINT('',#36256); +#36256 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36257 = LINE('',#36258,#36259); +#36258 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36259 = VECTOR('',#36260,1.); +#36260 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36261 = ORIENTED_EDGE('',*,*,#36262,.T.); +#36262 = EDGE_CURVE('',#36255,#36263,#36265,.T.); +#36263 = VERTEX_POINT('',#36264); +#36264 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36265 = LINE('',#36266,#36267); +#36266 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36267 = VECTOR('',#36268,1.); +#36268 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36269 = ORIENTED_EDGE('',*,*,#36270,.T.); +#36270 = EDGE_CURVE('',#36263,#36271,#36273,.T.); +#36271 = VERTEX_POINT('',#36272); +#36272 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36273 = LINE('',#36274,#36275); +#36274 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36275 = VECTOR('',#36276,1.); +#36276 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36277 = ORIENTED_EDGE('',*,*,#36278,.T.); +#36278 = EDGE_CURVE('',#36271,#36192,#36279,.T.); +#36279 = LINE('',#36280,#36281); +#36280 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36281 = VECTOR('',#36282,1.); +#36282 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36283 = PLANE('',#36284); +#36284 = AXIS2_PLACEMENT_3D('',#36285,#36286,#36287); +#36285 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36286 = DIRECTION('',(0.,0.,-1.)); +#36287 = DIRECTION('',(0.370454302632,-0.928850692879,0.)); +#36288 = ADVANCED_FACE('',(#36289),#36306,.F.); +#36289 = FACE_BOUND('',#36290,.F.); +#36290 = EDGE_LOOP('',(#36291,#36292,#36299,#36305)); +#36291 = ORIENTED_EDGE('',*,*,#36230,.T.); +#36292 = ORIENTED_EDGE('',*,*,#36293,.T.); +#36293 = EDGE_CURVE('',#36231,#36294,#36296,.T.); +#36294 = VERTEX_POINT('',#36295); +#36295 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36296 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36297,#36298),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36297 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36298 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36299 = ORIENTED_EDGE('',*,*,#36300,.F.); +#36300 = EDGE_CURVE('',#36202,#36294,#36301,.T.); +#36301 = LINE('',#36302,#36303); +#36302 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36303 = VECTOR('',#36304,1.); +#36304 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36305 = ORIENTED_EDGE('',*,*,#36201,.F.); +#36306 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36307,#36308) + ,(#36309,#36310 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36307 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36308 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36309 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36310 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36311 = ADVANCED_FACE('',(#36312),#36335,.F.); +#36312 = FACE_BOUND('',#36313,.F.); +#36313 = EDGE_LOOP('',(#36314,#36315,#36322,#36330)); +#36314 = ORIENTED_EDGE('',*,*,#36208,.T.); +#36315 = ORIENTED_EDGE('',*,*,#36316,.T.); +#36316 = EDGE_CURVE('',#36202,#36317,#36319,.T.); +#36317 = VERTEX_POINT('',#36318); +#36318 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36319 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36320,#36321),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36320 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36321 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36322 = ORIENTED_EDGE('',*,*,#36323,.F.); +#36323 = EDGE_CURVE('',#36324,#36317,#36326,.T.); +#36324 = VERTEX_POINT('',#36325); +#36325 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36326 = LINE('',#36327,#36328); +#36327 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36328 = VECTOR('',#36329,1.); +#36329 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36330 = ORIENTED_EDGE('',*,*,#36331,.F.); +#36331 = EDGE_CURVE('',#36209,#36324,#36332,.T.); +#36332 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36333,#36334),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36333 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36334 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36335 = PLANE('',#36336); +#36336 = AXIS2_PLACEMENT_3D('',#36337,#36338,#36339); +#36337 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36338 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36339 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36340 = ADVANCED_FACE('',(#36341),#36358,.F.); +#36341 = FACE_BOUND('',#36342,.F.); +#36342 = EDGE_LOOP('',(#36343,#36344,#36345,#36353)); +#36343 = ORIENTED_EDGE('',*,*,#36278,.T.); +#36344 = ORIENTED_EDGE('',*,*,#36216,.T.); +#36345 = ORIENTED_EDGE('',*,*,#36346,.F.); +#36346 = EDGE_CURVE('',#36347,#36209,#36349,.T.); +#36347 = VERTEX_POINT('',#36348); +#36348 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36349 = LINE('',#36350,#36351); +#36350 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36351 = VECTOR('',#36352,1.); +#36352 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36353 = ORIENTED_EDGE('',*,*,#36354,.F.); +#36354 = EDGE_CURVE('',#36271,#36347,#36355,.T.); +#36355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36356,#36357),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36356 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36357 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36358 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36359,#36360) + ,(#36361,#36362 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36359 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36360 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36361 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36362 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36363 = ADVANCED_FACE('',(#36364),#36413,.F.); +#36364 = FACE_BOUND('',#36365,.F.); +#36365 = EDGE_LOOP('',(#36366,#36367,#36368,#36376,#36384,#36392,#36400, + #36408)); +#36366 = ORIENTED_EDGE('',*,*,#36270,.T.); +#36367 = ORIENTED_EDGE('',*,*,#36354,.T.); +#36368 = ORIENTED_EDGE('',*,*,#36369,.F.); +#36369 = EDGE_CURVE('',#36370,#36347,#36372,.T.); +#36370 = VERTEX_POINT('',#36371); +#36371 = CARTESIAN_POINT('',(-0.7,1.15,0.575)); +#36372 = LINE('',#36373,#36374); +#36373 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36374 = VECTOR('',#36375,1.); +#36375 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36376 = ORIENTED_EDGE('',*,*,#36377,.F.); +#36377 = EDGE_CURVE('',#36378,#36370,#36380,.T.); +#36378 = VERTEX_POINT('',#36379); +#36379 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#36380 = LINE('',#36381,#36382); +#36381 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#36382 = VECTOR('',#36383,1.); +#36383 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36384 = ORIENTED_EDGE('',*,*,#36385,.F.); +#36385 = EDGE_CURVE('',#36386,#36378,#36388,.T.); +#36386 = VERTEX_POINT('',#36387); +#36387 = CARTESIAN_POINT('',(-0.7,-0.75,0.575)); +#36388 = LINE('',#36389,#36390); +#36389 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36390 = VECTOR('',#36391,1.); +#36391 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36392 = ORIENTED_EDGE('',*,*,#36393,.F.); +#36393 = EDGE_CURVE('',#36394,#36386,#36396,.T.); +#36394 = VERTEX_POINT('',#36395); +#36395 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#36396 = LINE('',#36397,#36398); +#36397 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#36398 = VECTOR('',#36399,1.); +#36399 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36400 = ORIENTED_EDGE('',*,*,#36401,.F.); +#36401 = EDGE_CURVE('',#36402,#36394,#36404,.T.); +#36402 = VERTEX_POINT('',#36403); +#36403 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36404 = LINE('',#36405,#36406); +#36405 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36406 = VECTOR('',#36407,1.); +#36407 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36408 = ORIENTED_EDGE('',*,*,#36409,.F.); +#36409 = EDGE_CURVE('',#36263,#36402,#36410,.T.); +#36410 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36411,#36412),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36411 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36412 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36413 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36414,#36415) + ,(#36416,#36417 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36414 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36415 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36416 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36417 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36418 = ADVANCED_FACE('',(#36419),#36452,.F.); +#36419 = FACE_BOUND('',#36420,.F.); +#36420 = EDGE_LOOP('',(#36421,#36422,#36429,#36437,#36445,#36451)); +#36421 = ORIENTED_EDGE('',*,*,#36238,.T.); +#36422 = ORIENTED_EDGE('',*,*,#36423,.T.); +#36423 = EDGE_CURVE('',#36239,#36424,#36426,.T.); +#36424 = VERTEX_POINT('',#36425); +#36425 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36426 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36427,#36428),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36427 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36428 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36429 = ORIENTED_EDGE('',*,*,#36430,.F.); +#36430 = EDGE_CURVE('',#36431,#36424,#36433,.T.); +#36431 = VERTEX_POINT('',#36432); +#36432 = CARTESIAN_POINT('',(0.7,-0.2,0.575)); +#36433 = LINE('',#36434,#36435); +#36434 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36435 = VECTOR('',#36436,1.); +#36436 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36437 = ORIENTED_EDGE('',*,*,#36438,.F.); +#36438 = EDGE_CURVE('',#36439,#36431,#36441,.T.); +#36439 = VERTEX_POINT('',#36440); +#36440 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#36441 = LINE('',#36442,#36443); +#36442 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#36443 = VECTOR('',#36444,1.); +#36444 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36445 = ORIENTED_EDGE('',*,*,#36446,.F.); +#36446 = EDGE_CURVE('',#36294,#36439,#36447,.T.); +#36447 = LINE('',#36448,#36449); +#36448 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36449 = VECTOR('',#36450,1.); +#36450 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36451 = ORIENTED_EDGE('',*,*,#36293,.F.); +#36452 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36453,#36454) + ,(#36455,#36456 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36453 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36454 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36455 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36456 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36457 = ADVANCED_FACE('',(#36458),#36475,.F.); +#36458 = FACE_BOUND('',#36459,.F.); +#36459 = EDGE_LOOP('',(#36460,#36461,#36462,#36470)); +#36460 = ORIENTED_EDGE('',*,*,#36262,.T.); +#36461 = ORIENTED_EDGE('',*,*,#36409,.T.); +#36462 = ORIENTED_EDGE('',*,*,#36463,.F.); +#36463 = EDGE_CURVE('',#36464,#36402,#36466,.T.); +#36464 = VERTEX_POINT('',#36465); +#36465 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36466 = LINE('',#36467,#36468); +#36467 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36468 = VECTOR('',#36469,1.); +#36469 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36470 = ORIENTED_EDGE('',*,*,#36471,.F.); +#36471 = EDGE_CURVE('',#36255,#36464,#36472,.T.); +#36472 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36473,#36474),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36473 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36474 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36475 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36476,#36477) + ,(#36478,#36479 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36476 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36477 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36478 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36479 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36480 = ADVANCED_FACE('',(#36481),#36498,.F.); +#36481 = FACE_BOUND('',#36482,.F.); +#36482 = EDGE_LOOP('',(#36483,#36484,#36491,#36497)); +#36483 = ORIENTED_EDGE('',*,*,#36246,.T.); +#36484 = ORIENTED_EDGE('',*,*,#36485,.T.); +#36485 = EDGE_CURVE('',#36247,#36486,#36488,.T.); +#36486 = VERTEX_POINT('',#36487); +#36487 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36489,#36490),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36489 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36490 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36491 = ORIENTED_EDGE('',*,*,#36492,.F.); +#36492 = EDGE_CURVE('',#36424,#36486,#36493,.T.); +#36493 = LINE('',#36494,#36495); +#36494 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36495 = VECTOR('',#36496,1.); +#36496 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36497 = ORIENTED_EDGE('',*,*,#36423,.F.); +#36498 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36499,#36500) + ,(#36501,#36502 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36499 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36500 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36501 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36502 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36503 = ADVANCED_FACE('',(#36504),#36515,.F.); +#36504 = FACE_BOUND('',#36505,.F.); +#36505 = EDGE_LOOP('',(#36506,#36507,#36508,#36514)); +#36506 = ORIENTED_EDGE('',*,*,#36254,.T.); +#36507 = ORIENTED_EDGE('',*,*,#36471,.T.); +#36508 = ORIENTED_EDGE('',*,*,#36509,.F.); +#36509 = EDGE_CURVE('',#36486,#36464,#36510,.T.); +#36510 = LINE('',#36511,#36512); +#36511 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36512 = VECTOR('',#36513,1.); +#36513 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36514 = ORIENTED_EDGE('',*,*,#36485,.F.); +#36515 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36516,#36517) + ,(#36518,#36519 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36516 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36517 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36518 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36519 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36520 = ADVANCED_FACE('',(#36521),#36538,.F.); +#36521 = FACE_BOUND('',#36522,.F.); +#36522 = EDGE_LOOP('',(#36523,#36524,#36531,#36537)); +#36523 = ORIENTED_EDGE('',*,*,#36300,.T.); +#36524 = ORIENTED_EDGE('',*,*,#36525,.T.); +#36525 = EDGE_CURVE('',#36294,#36526,#36528,.T.); +#36526 = VERTEX_POINT('',#36527); +#36527 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36528 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36529,#36530),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36529 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36530 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36531 = ORIENTED_EDGE('',*,*,#36532,.F.); +#36532 = EDGE_CURVE('',#36317,#36526,#36533,.T.); +#36533 = LINE('',#36534,#36535); +#36534 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36535 = VECTOR('',#36536,1.); +#36536 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36537 = ORIENTED_EDGE('',*,*,#36316,.F.); +#36538 = PLANE('',#36539); +#36539 = AXIS2_PLACEMENT_3D('',#36540,#36541,#36542); +#36540 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36541 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36542 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36543 = ADVANCED_FACE('',(#36544),#36626,.F.); +#36544 = FACE_BOUND('',#36545,.F.); +#36545 = EDGE_LOOP('',(#36546,#36554,#36555,#36556,#36564,#36572,#36580, + #36588,#36596,#36604,#36612,#36620)); +#36546 = ORIENTED_EDGE('',*,*,#36547,.T.); +#36547 = EDGE_CURVE('',#36548,#36324,#36550,.T.); +#36548 = VERTEX_POINT('',#36549); +#36549 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36550 = LINE('',#36551,#36552); +#36551 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36552 = VECTOR('',#36553,1.); +#36553 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36554 = ORIENTED_EDGE('',*,*,#36323,.T.); +#36555 = ORIENTED_EDGE('',*,*,#36532,.T.); +#36556 = ORIENTED_EDGE('',*,*,#36557,.T.); +#36557 = EDGE_CURVE('',#36526,#36558,#36560,.T.); +#36558 = VERTEX_POINT('',#36559); +#36559 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#36560 = LINE('',#36561,#36562); +#36561 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36562 = VECTOR('',#36563,1.); +#36563 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36564 = ORIENTED_EDGE('',*,*,#36565,.T.); +#36565 = EDGE_CURVE('',#36558,#36566,#36568,.T.); +#36566 = VERTEX_POINT('',#36567); +#36567 = CARTESIAN_POINT('',(0.675,0.2,0.725)); +#36568 = LINE('',#36569,#36570); +#36569 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#36570 = VECTOR('',#36571,1.); +#36571 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36572 = ORIENTED_EDGE('',*,*,#36573,.F.); +#36573 = EDGE_CURVE('',#36574,#36566,#36576,.T.); +#36574 = VERTEX_POINT('',#36575); +#36575 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#36576 = LINE('',#36577,#36578); +#36577 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#36578 = VECTOR('',#36579,1.); +#36579 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36580 = ORIENTED_EDGE('',*,*,#36581,.F.); +#36581 = EDGE_CURVE('',#36582,#36574,#36584,.T.); +#36582 = VERTEX_POINT('',#36583); +#36583 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#36584 = LINE('',#36585,#36586); +#36585 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#36586 = VECTOR('',#36587,1.); +#36587 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36588 = ORIENTED_EDGE('',*,*,#36589,.F.); +#36589 = EDGE_CURVE('',#36590,#36582,#36592,.T.); +#36590 = VERTEX_POINT('',#36591); +#36591 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#36592 = LINE('',#36593,#36594); +#36593 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#36594 = VECTOR('',#36595,1.); +#36595 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36596 = ORIENTED_EDGE('',*,*,#36597,.F.); +#36597 = EDGE_CURVE('',#36598,#36590,#36600,.T.); +#36598 = VERTEX_POINT('',#36599); +#36599 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#36600 = LINE('',#36601,#36602); +#36601 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#36602 = VECTOR('',#36603,1.); +#36603 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36604 = ORIENTED_EDGE('',*,*,#36605,.F.); +#36605 = EDGE_CURVE('',#36606,#36598,#36608,.T.); +#36606 = VERTEX_POINT('',#36607); +#36607 = CARTESIAN_POINT('',(-0.675,1.15,0.725)); +#36608 = LINE('',#36609,#36610); +#36609 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36610 = VECTOR('',#36611,1.); +#36611 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36612 = ORIENTED_EDGE('',*,*,#36613,.F.); +#36613 = EDGE_CURVE('',#36614,#36606,#36616,.T.); +#36614 = VERTEX_POINT('',#36615); +#36615 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#36616 = LINE('',#36617,#36618); +#36617 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#36618 = VECTOR('',#36619,1.); +#36619 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#36620 = ORIENTED_EDGE('',*,*,#36621,.T.); +#36621 = EDGE_CURVE('',#36614,#36548,#36622,.T.); +#36622 = LINE('',#36623,#36624); +#36623 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36624 = VECTOR('',#36625,1.); +#36625 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36626 = PLANE('',#36627); +#36627 = AXIS2_PLACEMENT_3D('',#36628,#36629,#36630); +#36628 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#36629 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#36630 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#36631 = ADVANCED_FACE('',(#36632),#36642,.F.); +#36632 = FACE_BOUND('',#36633,.F.); +#36633 = EDGE_LOOP('',(#36634,#36635,#36636,#36637)); +#36634 = ORIENTED_EDGE('',*,*,#36346,.T.); +#36635 = ORIENTED_EDGE('',*,*,#36331,.T.); +#36636 = ORIENTED_EDGE('',*,*,#36547,.F.); +#36637 = ORIENTED_EDGE('',*,*,#36638,.F.); +#36638 = EDGE_CURVE('',#36347,#36548,#36639,.T.); +#36639 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36640,#36641),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36640 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36641 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36642 = PLANE('',#36643); +#36643 = AXIS2_PLACEMENT_3D('',#36644,#36645,#36646); +#36644 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36645 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36646 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36647 = ADVANCED_FACE('',(#36648),#36672,.F.); +#36648 = FACE_BOUND('',#36649,.F.); +#36649 = EDGE_LOOP('',(#36650,#36657,#36658,#36666)); +#36650 = ORIENTED_EDGE('',*,*,#36651,.F.); +#36651 = EDGE_CURVE('',#36402,#36652,#36654,.T.); +#36652 = VERTEX_POINT('',#36653); +#36653 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36654 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36655,#36656),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36655 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36656 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36657 = ORIENTED_EDGE('',*,*,#36401,.T.); +#36658 = ORIENTED_EDGE('',*,*,#36659,.T.); +#36659 = EDGE_CURVE('',#36394,#36660,#36662,.T.); +#36660 = VERTEX_POINT('',#36661); +#36661 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#36662 = LINE('',#36663,#36664); +#36663 = CARTESIAN_POINT('',(-0.7,-1.15,0.529763586955)); +#36664 = VECTOR('',#36665,1.); +#36665 = DIRECTION('',(0.,0.,1.)); +#36666 = ORIENTED_EDGE('',*,*,#36667,.F.); +#36667 = EDGE_CURVE('',#36652,#36660,#36668,.T.); +#36668 = LINE('',#36669,#36670); +#36669 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36670 = VECTOR('',#36671,1.); +#36671 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36672 = PLANE('',#36673); +#36673 = AXIS2_PLACEMENT_3D('',#36674,#36675,#36676); +#36674 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36675 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36676 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36677 = ADVANCED_FACE('',(#36678),#36705,.F.); +#36678 = FACE_BOUND('',#36679,.F.); +#36679 = EDGE_LOOP('',(#36680,#36681,#36690,#36698)); +#36680 = ORIENTED_EDGE('',*,*,#36393,.T.); +#36681 = ORIENTED_EDGE('',*,*,#36682,.T.); +#36682 = EDGE_CURVE('',#36386,#36683,#36685,.T.); +#36683 = VERTEX_POINT('',#36684); +#36684 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#36685 = CIRCLE('',#36686,0.1); +#36686 = AXIS2_PLACEMENT_3D('',#36687,#36688,#36689); +#36687 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#36688 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36689 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36690 = ORIENTED_EDGE('',*,*,#36691,.F.); +#36691 = EDGE_CURVE('',#36692,#36683,#36694,.T.); +#36692 = VERTEX_POINT('',#36693); +#36693 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#36694 = LINE('',#36695,#36696); +#36695 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#36696 = VECTOR('',#36697,1.); +#36697 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36698 = ORIENTED_EDGE('',*,*,#36699,.F.); +#36699 = EDGE_CURVE('',#36394,#36692,#36700,.T.); +#36700 = CIRCLE('',#36701,0.1); +#36701 = AXIS2_PLACEMENT_3D('',#36702,#36703,#36704); +#36702 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#36703 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36704 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36705 = CYLINDRICAL_SURFACE('',#36706,0.1); +#36706 = AXIS2_PLACEMENT_3D('',#36707,#36708,#36709); +#36707 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#36708 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#36709 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36710 = ADVANCED_FACE('',(#36711),#36736,.F.); +#36711 = FACE_BOUND('',#36712,.F.); +#36712 = EDGE_LOOP('',(#36713,#36721,#36722,#36730)); +#36713 = ORIENTED_EDGE('',*,*,#36714,.F.); +#36714 = EDGE_CURVE('',#36386,#36715,#36717,.T.); +#36715 = VERTEX_POINT('',#36716); +#36716 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#36717 = LINE('',#36718,#36719); +#36718 = CARTESIAN_POINT('',(-0.7,-0.75,0.529763586955)); +#36719 = VECTOR('',#36720,1.); +#36720 = DIRECTION('',(0.,0.,1.)); +#36721 = ORIENTED_EDGE('',*,*,#36385,.T.); +#36722 = ORIENTED_EDGE('',*,*,#36723,.T.); +#36723 = EDGE_CURVE('',#36378,#36724,#36726,.T.); +#36724 = VERTEX_POINT('',#36725); +#36725 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36726 = LINE('',#36727,#36728); +#36727 = CARTESIAN_POINT('',(-0.7,0.75,0.529763586955)); +#36728 = VECTOR('',#36729,1.); +#36729 = DIRECTION('',(0.,0.,1.)); +#36730 = ORIENTED_EDGE('',*,*,#36731,.F.); +#36731 = EDGE_CURVE('',#36715,#36724,#36732,.T.); +#36732 = LINE('',#36733,#36734); +#36733 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36734 = VECTOR('',#36735,1.); +#36735 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36736 = PLANE('',#36737); +#36737 = AXIS2_PLACEMENT_3D('',#36738,#36739,#36740); +#36738 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36739 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36740 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36741 = ADVANCED_FACE('',(#36742),#36769,.F.); +#36742 = FACE_BOUND('',#36743,.F.); +#36743 = EDGE_LOOP('',(#36744,#36745,#36754,#36762)); +#36744 = ORIENTED_EDGE('',*,*,#36377,.T.); +#36745 = ORIENTED_EDGE('',*,*,#36746,.T.); +#36746 = EDGE_CURVE('',#36370,#36747,#36749,.T.); +#36747 = VERTEX_POINT('',#36748); +#36748 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#36749 = CIRCLE('',#36750,0.1); +#36750 = AXIS2_PLACEMENT_3D('',#36751,#36752,#36753); +#36751 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#36752 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36753 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36754 = ORIENTED_EDGE('',*,*,#36755,.F.); +#36755 = EDGE_CURVE('',#36756,#36747,#36758,.T.); +#36756 = VERTEX_POINT('',#36757); +#36757 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#36758 = LINE('',#36759,#36760); +#36759 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#36760 = VECTOR('',#36761,1.); +#36761 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36762 = ORIENTED_EDGE('',*,*,#36763,.F.); +#36763 = EDGE_CURVE('',#36378,#36756,#36764,.T.); +#36764 = CIRCLE('',#36765,0.1); +#36765 = AXIS2_PLACEMENT_3D('',#36766,#36767,#36768); +#36766 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#36767 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36768 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36769 = CYLINDRICAL_SURFACE('',#36770,0.1); +#36770 = AXIS2_PLACEMENT_3D('',#36771,#36772,#36773); +#36771 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#36772 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#36773 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36774 = ADVANCED_FACE('',(#36775),#36786,.F.); +#36775 = FACE_BOUND('',#36776,.F.); +#36776 = EDGE_LOOP('',(#36777,#36783,#36784,#36785)); +#36777 = ORIENTED_EDGE('',*,*,#36778,.F.); +#36778 = EDGE_CURVE('',#36370,#36614,#36779,.T.); +#36779 = LINE('',#36780,#36781); +#36780 = CARTESIAN_POINT('',(-0.7,1.15,0.529763586955)); +#36781 = VECTOR('',#36782,1.); +#36782 = DIRECTION('',(0.,0.,1.)); +#36783 = ORIENTED_EDGE('',*,*,#36369,.T.); +#36784 = ORIENTED_EDGE('',*,*,#36638,.T.); +#36785 = ORIENTED_EDGE('',*,*,#36621,.F.); +#36786 = PLANE('',#36787); +#36787 = AXIS2_PLACEMENT_3D('',#36788,#36789,#36790); +#36788 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36789 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36790 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36791 = ADVANCED_FACE('',(#36792),#36803,.F.); +#36792 = FACE_BOUND('',#36793,.F.); +#36793 = EDGE_LOOP('',(#36794,#36795,#36796,#36802)); +#36794 = ORIENTED_EDGE('',*,*,#36525,.F.); +#36795 = ORIENTED_EDGE('',*,*,#36446,.T.); +#36796 = ORIENTED_EDGE('',*,*,#36797,.T.); +#36797 = EDGE_CURVE('',#36439,#36558,#36798,.T.); +#36798 = LINE('',#36799,#36800); +#36799 = CARTESIAN_POINT('',(0.7,0.2,0.529763586955)); +#36800 = VECTOR('',#36801,1.); +#36801 = DIRECTION('',(0.,0.,1.)); +#36802 = ORIENTED_EDGE('',*,*,#36557,.F.); +#36803 = PLANE('',#36804); +#36804 = AXIS2_PLACEMENT_3D('',#36805,#36806,#36807); +#36805 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36806 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36807 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36808 = ADVANCED_FACE('',(#36809),#36836,.F.); +#36809 = FACE_BOUND('',#36810,.F.); +#36810 = EDGE_LOOP('',(#36811,#36812,#36821,#36829)); +#36811 = ORIENTED_EDGE('',*,*,#36438,.T.); +#36812 = ORIENTED_EDGE('',*,*,#36813,.T.); +#36813 = EDGE_CURVE('',#36431,#36814,#36816,.T.); +#36814 = VERTEX_POINT('',#36815); +#36815 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#36816 = CIRCLE('',#36817,0.1); +#36817 = AXIS2_PLACEMENT_3D('',#36818,#36819,#36820); +#36818 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#36819 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#36820 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#36821 = ORIENTED_EDGE('',*,*,#36822,.F.); +#36822 = EDGE_CURVE('',#36823,#36814,#36825,.T.); +#36823 = VERTEX_POINT('',#36824); +#36824 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#36825 = LINE('',#36826,#36827); +#36826 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#36827 = VECTOR('',#36828,1.); +#36828 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36829 = ORIENTED_EDGE('',*,*,#36830,.F.); +#36830 = EDGE_CURVE('',#36439,#36823,#36831,.T.); +#36831 = CIRCLE('',#36832,0.1); +#36832 = AXIS2_PLACEMENT_3D('',#36833,#36834,#36835); +#36833 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#36834 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#36835 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#36836 = CYLINDRICAL_SURFACE('',#36837,0.1); +#36837 = AXIS2_PLACEMENT_3D('',#36838,#36839,#36840); +#36838 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#36839 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36840 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#36841 = ADVANCED_FACE('',(#36842),#36866,.F.); +#36842 = FACE_BOUND('',#36843,.F.); +#36843 = EDGE_LOOP('',(#36844,#36852,#36853,#36860)); +#36844 = ORIENTED_EDGE('',*,*,#36845,.F.); +#36845 = EDGE_CURVE('',#36431,#36846,#36848,.T.); +#36846 = VERTEX_POINT('',#36847); +#36847 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#36848 = LINE('',#36849,#36850); +#36849 = CARTESIAN_POINT('',(0.7,-0.2,0.529763586955)); +#36850 = VECTOR('',#36851,1.); +#36851 = DIRECTION('',(0.,0.,1.)); +#36852 = ORIENTED_EDGE('',*,*,#36430,.T.); +#36853 = ORIENTED_EDGE('',*,*,#36854,.T.); +#36854 = EDGE_CURVE('',#36424,#36855,#36857,.T.); +#36855 = VERTEX_POINT('',#36856); +#36856 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36857 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36858,#36859),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36858 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36859 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36860 = ORIENTED_EDGE('',*,*,#36861,.F.); +#36861 = EDGE_CURVE('',#36846,#36855,#36862,.T.); +#36862 = LINE('',#36863,#36864); +#36863 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36864 = VECTOR('',#36865,1.); +#36865 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36866 = PLANE('',#36867); +#36867 = AXIS2_PLACEMENT_3D('',#36868,#36869,#36870); +#36868 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36869 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36870 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36871 = ADVANCED_FACE('',(#36872),#36889,.F.); +#36872 = FACE_BOUND('',#36873,.F.); +#36873 = EDGE_LOOP('',(#36874,#36875,#36876,#36884)); +#36874 = ORIENTED_EDGE('',*,*,#36463,.T.); +#36875 = ORIENTED_EDGE('',*,*,#36651,.T.); +#36876 = ORIENTED_EDGE('',*,*,#36877,.F.); +#36877 = EDGE_CURVE('',#36878,#36652,#36880,.T.); +#36878 = VERTEX_POINT('',#36879); +#36879 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36880 = LINE('',#36881,#36882); +#36881 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36882 = VECTOR('',#36883,1.); +#36883 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36884 = ORIENTED_EDGE('',*,*,#36885,.F.); +#36885 = EDGE_CURVE('',#36464,#36878,#36886,.T.); +#36886 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36887,#36888),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36887 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36888 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36889 = PLANE('',#36890); +#36890 = AXIS2_PLACEMENT_3D('',#36891,#36892,#36893); +#36891 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36892 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36893 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36894 = ADVANCED_FACE('',(#36895),#36912,.F.); +#36895 = FACE_BOUND('',#36896,.F.); +#36896 = EDGE_LOOP('',(#36897,#36898,#36905,#36911)); +#36897 = ORIENTED_EDGE('',*,*,#36492,.T.); +#36898 = ORIENTED_EDGE('',*,*,#36899,.T.); +#36899 = EDGE_CURVE('',#36486,#36900,#36902,.T.); +#36900 = VERTEX_POINT('',#36901); +#36901 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36902 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36903,#36904),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36903 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36904 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36905 = ORIENTED_EDGE('',*,*,#36906,.F.); +#36906 = EDGE_CURVE('',#36855,#36900,#36907,.T.); +#36907 = LINE('',#36908,#36909); +#36908 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36909 = VECTOR('',#36910,1.); +#36910 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36911 = ORIENTED_EDGE('',*,*,#36854,.F.); +#36912 = PLANE('',#36913); +#36913 = AXIS2_PLACEMENT_3D('',#36914,#36915,#36916); +#36914 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36915 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36916 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36917 = ADVANCED_FACE('',(#36918),#36929,.F.); +#36918 = FACE_BOUND('',#36919,.F.); +#36919 = EDGE_LOOP('',(#36920,#36921,#36922,#36928)); +#36920 = ORIENTED_EDGE('',*,*,#36509,.T.); +#36921 = ORIENTED_EDGE('',*,*,#36885,.T.); +#36922 = ORIENTED_EDGE('',*,*,#36923,.F.); +#36923 = EDGE_CURVE('',#36900,#36878,#36924,.T.); +#36924 = LINE('',#36925,#36926); +#36925 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36926 = VECTOR('',#36927,1.); +#36927 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36928 = ORIENTED_EDGE('',*,*,#36899,.F.); +#36929 = PLANE('',#36930); +#36930 = AXIS2_PLACEMENT_3D('',#36931,#36932,#36933); +#36931 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36932 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36933 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36934 = ADVANCED_FACE('',(#36935),#36958,.F.); +#36935 = FACE_BOUND('',#36936,.F.); +#36936 = EDGE_LOOP('',(#36937,#36945,#36951,#36952)); +#36937 = ORIENTED_EDGE('',*,*,#36938,.F.); +#36938 = EDGE_CURVE('',#36724,#36939,#36941,.T.); +#36939 = VERTEX_POINT('',#36940); +#36940 = CARTESIAN_POINT('',(-0.675,0.75,0.725)); +#36941 = LINE('',#36942,#36943); +#36942 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36943 = VECTOR('',#36944,1.); +#36944 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#36945 = ORIENTED_EDGE('',*,*,#36946,.T.); +#36946 = EDGE_CURVE('',#36724,#36614,#36947,.T.); +#36947 = LINE('',#36948,#36949); +#36948 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36949 = VECTOR('',#36950,1.); +#36950 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36951 = ORIENTED_EDGE('',*,*,#36613,.T.); +#36952 = ORIENTED_EDGE('',*,*,#36953,.F.); +#36953 = EDGE_CURVE('',#36939,#36606,#36954,.T.); +#36954 = LINE('',#36955,#36956); +#36955 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36956 = VECTOR('',#36957,1.); +#36957 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36958 = PLANE('',#36959); +#36959 = AXIS2_PLACEMENT_3D('',#36960,#36961,#36962); +#36960 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36961 = DIRECTION('',(0.,0.,-1.)); +#36962 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#36963 = ADVANCED_FACE('',(#36964),#37012,.F.); +#36964 = FACE_BOUND('',#36965,.F.); +#36965 = EDGE_LOOP('',(#36966,#36976,#36984,#36990,#36991,#36992,#36999, + #37007)); +#36966 = ORIENTED_EDGE('',*,*,#36967,.T.); +#36967 = EDGE_CURVE('',#36968,#36970,#36972,.T.); +#36968 = VERTEX_POINT('',#36969); +#36969 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36970 = VERTEX_POINT('',#36971); +#36971 = CARTESIAN_POINT('',(-0.675,-1.15,0.725)); +#36972 = LINE('',#36973,#36974); +#36973 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36974 = VECTOR('',#36975,1.); +#36975 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36976 = ORIENTED_EDGE('',*,*,#36977,.T.); +#36977 = EDGE_CURVE('',#36970,#36978,#36980,.T.); +#36978 = VERTEX_POINT('',#36979); +#36979 = CARTESIAN_POINT('',(-0.675,-0.75,0.725)); +#36980 = LINE('',#36981,#36982); +#36981 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36982 = VECTOR('',#36983,1.); +#36983 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36984 = ORIENTED_EDGE('',*,*,#36985,.T.); +#36985 = EDGE_CURVE('',#36978,#36939,#36986,.T.); +#36986 = LINE('',#36987,#36988); +#36987 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36988 = VECTOR('',#36989,1.); +#36989 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36990 = ORIENTED_EDGE('',*,*,#36953,.T.); +#36991 = ORIENTED_EDGE('',*,*,#36605,.T.); +#36992 = ORIENTED_EDGE('',*,*,#36993,.T.); +#36993 = EDGE_CURVE('',#36598,#36994,#36996,.T.); +#36994 = VERTEX_POINT('',#36995); +#36995 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#36996 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36997,#36998),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36997 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#36998 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#36999 = ORIENTED_EDGE('',*,*,#37000,.F.); +#37000 = EDGE_CURVE('',#37001,#36994,#37003,.T.); +#37001 = VERTEX_POINT('',#37002); +#37002 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37003 = LINE('',#37004,#37005); +#37004 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37005 = VECTOR('',#37006,1.); +#37006 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#37007 = ORIENTED_EDGE('',*,*,#37008,.F.); +#37008 = EDGE_CURVE('',#36968,#37001,#37009,.T.); +#37009 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37010,#37011),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37010 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#37011 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37012 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37013,#37014) + ,(#37015,#37016 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37013 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#37014 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37015 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#37016 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#37017 = ADVANCED_FACE('',(#37018),#37035,.F.); +#37018 = FACE_BOUND('',#37019,.F.); +#37019 = EDGE_LOOP('',(#37020,#37021,#37028,#37034)); +#37020 = ORIENTED_EDGE('',*,*,#36597,.T.); +#37021 = ORIENTED_EDGE('',*,*,#37022,.T.); +#37022 = EDGE_CURVE('',#36590,#37023,#37025,.T.); +#37023 = VERTEX_POINT('',#37024); +#37024 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37025 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37026,#37027),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37026 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#37027 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37028 = ORIENTED_EDGE('',*,*,#37029,.F.); +#37029 = EDGE_CURVE('',#36994,#37023,#37030,.T.); +#37030 = LINE('',#37031,#37032); +#37031 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#37032 = VECTOR('',#37033,1.); +#37033 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#37034 = ORIENTED_EDGE('',*,*,#36993,.F.); +#37035 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37036,#37037) + ,(#37038,#37039 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37036 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#37037 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#37038 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#37039 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37040 = ADVANCED_FACE('',(#37041),#37058,.F.); +#37041 = FACE_BOUND('',#37042,.F.); +#37042 = EDGE_LOOP('',(#37043,#37044,#37051,#37057)); +#37043 = ORIENTED_EDGE('',*,*,#36589,.T.); +#37044 = ORIENTED_EDGE('',*,*,#37045,.T.); +#37045 = EDGE_CURVE('',#36582,#37046,#37048,.T.); +#37046 = VERTEX_POINT('',#37047); +#37047 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37048 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37049,#37050),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37049 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#37050 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37051 = ORIENTED_EDGE('',*,*,#37052,.F.); +#37052 = EDGE_CURVE('',#37023,#37046,#37053,.T.); +#37053 = LINE('',#37054,#37055); +#37054 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37055 = VECTOR('',#37056,1.); +#37056 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#37057 = ORIENTED_EDGE('',*,*,#37022,.F.); +#37058 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37059,#37060) + ,(#37061,#37062 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37059 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#37060 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37061 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#37062 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37063 = ADVANCED_FACE('',(#37064),#37081,.F.); +#37064 = FACE_BOUND('',#37065,.F.); +#37065 = EDGE_LOOP('',(#37066,#37067,#37074,#37080)); +#37066 = ORIENTED_EDGE('',*,*,#36581,.T.); +#37067 = ORIENTED_EDGE('',*,*,#37068,.T.); +#37068 = EDGE_CURVE('',#36574,#37069,#37071,.T.); +#37069 = VERTEX_POINT('',#37070); +#37070 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37071 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37072,#37073),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37072 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37073 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37074 = ORIENTED_EDGE('',*,*,#37075,.F.); +#37075 = EDGE_CURVE('',#37046,#37069,#37076,.T.); +#37076 = LINE('',#37077,#37078); +#37077 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37078 = VECTOR('',#37079,1.); +#37079 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#37080 = ORIENTED_EDGE('',*,*,#37045,.F.); +#37081 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37082,#37083) + ,(#37084,#37085 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37082 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#37083 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37084 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37085 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37086 = ADVANCED_FACE('',(#37087),#37120,.F.); +#37087 = FACE_BOUND('',#37088,.F.); +#37088 = EDGE_LOOP('',(#37089,#37090,#37098,#37106,#37113,#37119)); +#37089 = ORIENTED_EDGE('',*,*,#36573,.T.); +#37090 = ORIENTED_EDGE('',*,*,#37091,.T.); +#37091 = EDGE_CURVE('',#36566,#37092,#37094,.T.); +#37092 = VERTEX_POINT('',#37093); +#37093 = CARTESIAN_POINT('',(0.675,-0.2,0.725)); +#37094 = LINE('',#37095,#37096); +#37095 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37096 = VECTOR('',#37097,1.); +#37097 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37098 = ORIENTED_EDGE('',*,*,#37099,.T.); +#37099 = EDGE_CURVE('',#37092,#37100,#37102,.T.); +#37100 = VERTEX_POINT('',#37101); +#37101 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37102 = LINE('',#37103,#37104); +#37103 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37104 = VECTOR('',#37105,1.); +#37105 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37106 = ORIENTED_EDGE('',*,*,#37107,.T.); +#37107 = EDGE_CURVE('',#37100,#37108,#37110,.T.); +#37108 = VERTEX_POINT('',#37109); +#37109 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37110 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37111,#37112),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37111 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37112 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37113 = ORIENTED_EDGE('',*,*,#37114,.F.); +#37114 = EDGE_CURVE('',#37069,#37108,#37115,.T.); +#37115 = LINE('',#37116,#37117); +#37116 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37117 = VECTOR('',#37118,1.); +#37118 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37119 = ORIENTED_EDGE('',*,*,#37068,.F.); +#37120 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37121,#37122) + ,(#37123,#37124 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37121 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37122 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37123 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37124 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37125 = ADVANCED_FACE('',(#37126),#37142,.F.); +#37126 = FACE_BOUND('',#37127,.F.); +#37127 = EDGE_LOOP('',(#37128,#37129,#37135,#37141)); +#37128 = ORIENTED_EDGE('',*,*,#36565,.F.); +#37129 = ORIENTED_EDGE('',*,*,#37130,.T.); +#37130 = EDGE_CURVE('',#36558,#36846,#37131,.T.); +#37131 = LINE('',#37132,#37133); +#37132 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#37133 = VECTOR('',#37134,1.); +#37134 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37135 = ORIENTED_EDGE('',*,*,#37136,.T.); +#37136 = EDGE_CURVE('',#36846,#37092,#37137,.T.); +#37137 = LINE('',#37138,#37139); +#37138 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#37139 = VECTOR('',#37140,1.); +#37140 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37141 = ORIENTED_EDGE('',*,*,#37091,.F.); +#37142 = PLANE('',#37143); +#37143 = AXIS2_PLACEMENT_3D('',#37144,#37145,#37146); +#37144 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#37145 = DIRECTION('',(0.,0.,-1.)); +#37146 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#37147 = ADVANCED_FACE('',(#37148),#37186,.F.); +#37148 = FACE_BOUND('',#37149,.F.); +#37149 = EDGE_LOOP('',(#37150,#37151,#37152,#37153,#37154,#37155,#37156, + #37162,#37163,#37171,#37179,#37185)); +#37150 = ORIENTED_EDGE('',*,*,#37136,.F.); +#37151 = ORIENTED_EDGE('',*,*,#36861,.T.); +#37152 = ORIENTED_EDGE('',*,*,#36906,.T.); +#37153 = ORIENTED_EDGE('',*,*,#36923,.T.); +#37154 = ORIENTED_EDGE('',*,*,#36877,.T.); +#37155 = ORIENTED_EDGE('',*,*,#36667,.T.); +#37156 = ORIENTED_EDGE('',*,*,#37157,.T.); +#37157 = EDGE_CURVE('',#36660,#36970,#37158,.T.); +#37158 = LINE('',#37159,#37160); +#37159 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#37160 = VECTOR('',#37161,1.); +#37161 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37162 = ORIENTED_EDGE('',*,*,#36967,.F.); +#37163 = ORIENTED_EDGE('',*,*,#37164,.F.); +#37164 = EDGE_CURVE('',#37165,#36968,#37167,.T.); +#37165 = VERTEX_POINT('',#37166); +#37166 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37167 = LINE('',#37168,#37169); +#37168 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37169 = VECTOR('',#37170,1.); +#37170 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#37171 = ORIENTED_EDGE('',*,*,#37172,.F.); +#37172 = EDGE_CURVE('',#37173,#37165,#37175,.T.); +#37173 = VERTEX_POINT('',#37174); +#37174 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37175 = LINE('',#37176,#37177); +#37176 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37177 = VECTOR('',#37178,1.); +#37178 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37179 = ORIENTED_EDGE('',*,*,#37180,.F.); +#37180 = EDGE_CURVE('',#37100,#37173,#37181,.T.); +#37181 = LINE('',#37182,#37183); +#37182 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37183 = VECTOR('',#37184,1.); +#37184 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#37185 = ORIENTED_EDGE('',*,*,#37099,.F.); +#37186 = PLANE('',#37187); +#37187 = AXIS2_PLACEMENT_3D('',#37188,#37189,#37190); +#37188 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#37189 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#37190 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#37191 = ADVANCED_FACE('',(#37192),#37261,.F.); +#37192 = FACE_BOUND('',#37193,.F.); +#37193 = EDGE_LOOP('',(#37194,#37195,#37196,#37204,#37213,#37221,#37229, + #37237,#37246,#37254)); +#37194 = ORIENTED_EDGE('',*,*,#36659,.F.); +#37195 = ORIENTED_EDGE('',*,*,#36699,.T.); +#37196 = ORIENTED_EDGE('',*,*,#37197,.T.); +#37197 = EDGE_CURVE('',#36692,#37198,#37200,.T.); +#37198 = VERTEX_POINT('',#37199); +#37199 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#37200 = LINE('',#37201,#37202); +#37201 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#37202 = VECTOR('',#37203,1.); +#37203 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37204 = ORIENTED_EDGE('',*,*,#37205,.T.); +#37205 = EDGE_CURVE('',#37198,#37206,#37208,.T.); +#37206 = VERTEX_POINT('',#37207); +#37207 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37208 = CIRCLE('',#37209,0.25); +#37209 = AXIS2_PLACEMENT_3D('',#37210,#37211,#37212); +#37210 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37211 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37212 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37213 = ORIENTED_EDGE('',*,*,#37214,.T.); +#37214 = EDGE_CURVE('',#37206,#37215,#37217,.T.); +#37215 = VERTEX_POINT('',#37216); +#37216 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37217 = LINE('',#37218,#37219); +#37218 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37219 = VECTOR('',#37220,1.); +#37220 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37221 = ORIENTED_EDGE('',*,*,#37222,.T.); +#37222 = EDGE_CURVE('',#37215,#37223,#37225,.T.); +#37223 = VERTEX_POINT('',#37224); +#37224 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37225 = LINE('',#37226,#37227); +#37226 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37227 = VECTOR('',#37228,1.); +#37228 = DIRECTION('',(0.,0.,1.)); +#37229 = ORIENTED_EDGE('',*,*,#37230,.T.); +#37230 = EDGE_CURVE('',#37223,#37231,#37233,.T.); +#37231 = VERTEX_POINT('',#37232); +#37232 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#37233 = LINE('',#37234,#37235); +#37234 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37235 = VECTOR('',#37236,1.); +#37236 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37237 = ORIENTED_EDGE('',*,*,#37238,.T.); +#37238 = EDGE_CURVE('',#37231,#37239,#37241,.T.); +#37239 = VERTEX_POINT('',#37240); +#37240 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37241 = CIRCLE('',#37242,0.1); +#37242 = AXIS2_PLACEMENT_3D('',#37243,#37244,#37245); +#37243 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37244 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37245 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37246 = ORIENTED_EDGE('',*,*,#37247,.T.); +#37247 = EDGE_CURVE('',#37239,#37248,#37250,.T.); +#37248 = VERTEX_POINT('',#37249); +#37249 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#37250 = LINE('',#37251,#37252); +#37251 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37252 = VECTOR('',#37253,1.); +#37253 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37254 = ORIENTED_EDGE('',*,*,#37255,.T.); +#37255 = EDGE_CURVE('',#37248,#36660,#37256,.T.); +#37256 = CIRCLE('',#37257,0.25); +#37257 = AXIS2_PLACEMENT_3D('',#37258,#37259,#37260); +#37258 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#37259 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37260 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37261 = PLANE('',#37262); +#37262 = AXIS2_PLACEMENT_3D('',#37263,#37264,#37265); +#37263 = CARTESIAN_POINT('',(-0.931323080229,-1.15,0.33452717391)); +#37264 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37265 = DIRECTION('',(0.,-0.,1.)); +#37266 = ADVANCED_FACE('',(#37267),#37285,.F.); +#37267 = FACE_BOUND('',#37268,.F.); +#37268 = EDGE_LOOP('',(#37269,#37270,#37278,#37284)); +#37269 = ORIENTED_EDGE('',*,*,#36691,.T.); +#37270 = ORIENTED_EDGE('',*,*,#37271,.T.); +#37271 = EDGE_CURVE('',#36683,#37272,#37274,.T.); +#37272 = VERTEX_POINT('',#37273); +#37273 = CARTESIAN_POINT('',(-0.843471632406,-0.75,0.206587955583)); +#37274 = LINE('',#37275,#37276); +#37275 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#37276 = VECTOR('',#37277,1.); +#37277 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37278 = ORIENTED_EDGE('',*,*,#37279,.F.); +#37279 = EDGE_CURVE('',#37198,#37272,#37280,.T.); +#37280 = LINE('',#37281,#37282); +#37281 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#37282 = VECTOR('',#37283,1.); +#37283 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37284 = ORIENTED_EDGE('',*,*,#37197,.F.); +#37285 = PLANE('',#37286); +#37286 = AXIS2_PLACEMENT_3D('',#37287,#37288,#37289); +#37287 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#37288 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#37289 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37290 = ADVANCED_FACE('',(#37291),#37353,.T.); +#37291 = FACE_BOUND('',#37292,.T.); +#37292 = EDGE_LOOP('',(#37293,#37294,#37295,#37296,#37305,#37313,#37321, + #37329,#37338,#37346)); +#37293 = ORIENTED_EDGE('',*,*,#36714,.F.); +#37294 = ORIENTED_EDGE('',*,*,#36682,.T.); +#37295 = ORIENTED_EDGE('',*,*,#37271,.T.); +#37296 = ORIENTED_EDGE('',*,*,#37297,.T.); +#37297 = EDGE_CURVE('',#37272,#37298,#37300,.T.); +#37298 = VERTEX_POINT('',#37299); +#37299 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#37300 = CIRCLE('',#37301,0.25); +#37301 = AXIS2_PLACEMENT_3D('',#37302,#37303,#37304); +#37302 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#37303 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37304 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37305 = ORIENTED_EDGE('',*,*,#37306,.T.); +#37306 = EDGE_CURVE('',#37298,#37307,#37309,.T.); +#37307 = VERTEX_POINT('',#37308); +#37308 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#37309 = LINE('',#37310,#37311); +#37310 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#37311 = VECTOR('',#37312,1.); +#37312 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37313 = ORIENTED_EDGE('',*,*,#37314,.T.); +#37314 = EDGE_CURVE('',#37307,#37315,#37317,.T.); +#37315 = VERTEX_POINT('',#37316); +#37316 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#37317 = LINE('',#37318,#37319); +#37318 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#37319 = VECTOR('',#37320,1.); +#37320 = DIRECTION('',(0.,0.,1.)); +#37321 = ORIENTED_EDGE('',*,*,#37322,.T.); +#37322 = EDGE_CURVE('',#37315,#37323,#37325,.T.); +#37323 = VERTEX_POINT('',#37324); +#37324 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.15)); +#37325 = LINE('',#37326,#37327); +#37326 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#37327 = VECTOR('',#37328,1.); +#37328 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37329 = ORIENTED_EDGE('',*,*,#37330,.T.); +#37330 = EDGE_CURVE('',#37323,#37331,#37333,.T.); +#37331 = VERTEX_POINT('',#37332); +#37332 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#37333 = CIRCLE('',#37334,0.1); +#37334 = AXIS2_PLACEMENT_3D('',#37335,#37336,#37337); +#37335 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#37336 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37337 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37338 = ORIENTED_EDGE('',*,*,#37339,.T.); +#37339 = EDGE_CURVE('',#37331,#37340,#37342,.T.); +#37340 = VERTEX_POINT('',#37341); +#37341 = CARTESIAN_POINT('',(-0.946201938253,-0.75,0.518412044417)); +#37342 = LINE('',#37343,#37344); +#37343 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#37344 = VECTOR('',#37345,1.); +#37345 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37346 = ORIENTED_EDGE('',*,*,#37347,.T.); +#37347 = EDGE_CURVE('',#37340,#36715,#37348,.T.); +#37348 = CIRCLE('',#37349,0.25); +#37349 = AXIS2_PLACEMENT_3D('',#37350,#37351,#37352); +#37350 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#37351 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37352 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37353 = PLANE('',#37354); +#37354 = AXIS2_PLACEMENT_3D('',#37355,#37356,#37357); +#37355 = CARTESIAN_POINT('',(-0.931323080229,-0.75,0.33452717391)); +#37356 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37357 = DIRECTION('',(0.,-0.,1.)); +#37358 = ADVANCED_FACE('',(#37359),#37370,.F.); +#37359 = FACE_BOUND('',#37360,.F.); +#37360 = EDGE_LOOP('',(#37361,#37362,#37363,#37364)); +#37361 = ORIENTED_EDGE('',*,*,#36731,.T.); +#37362 = ORIENTED_EDGE('',*,*,#36938,.T.); +#37363 = ORIENTED_EDGE('',*,*,#36985,.F.); +#37364 = ORIENTED_EDGE('',*,*,#37365,.F.); +#37365 = EDGE_CURVE('',#36715,#36978,#37366,.T.); +#37366 = LINE('',#37367,#37368); +#37367 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#37368 = VECTOR('',#37369,1.); +#37369 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37370 = PLANE('',#37371); +#37371 = AXIS2_PLACEMENT_3D('',#37372,#37373,#37374); +#37372 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#37373 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#37374 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#37375 = ADVANCED_FACE('',(#37376),#37445,.F.); +#37376 = FACE_BOUND('',#37377,.F.); +#37377 = EDGE_LOOP('',(#37378,#37379,#37380,#37388,#37397,#37405,#37413, + #37421,#37430,#37438)); +#37378 = ORIENTED_EDGE('',*,*,#36723,.F.); +#37379 = ORIENTED_EDGE('',*,*,#36763,.T.); +#37380 = ORIENTED_EDGE('',*,*,#37381,.T.); +#37381 = EDGE_CURVE('',#36756,#37382,#37384,.T.); +#37382 = VERTEX_POINT('',#37383); +#37383 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#37384 = LINE('',#37385,#37386); +#37385 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#37386 = VECTOR('',#37387,1.); +#37387 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37388 = ORIENTED_EDGE('',*,*,#37389,.T.); +#37389 = EDGE_CURVE('',#37382,#37390,#37392,.T.); +#37390 = VERTEX_POINT('',#37391); +#37391 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#37392 = CIRCLE('',#37393,0.25); +#37393 = AXIS2_PLACEMENT_3D('',#37394,#37395,#37396); +#37394 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#37395 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37396 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37397 = ORIENTED_EDGE('',*,*,#37398,.T.); +#37398 = EDGE_CURVE('',#37390,#37399,#37401,.T.); +#37399 = VERTEX_POINT('',#37400); +#37400 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#37401 = LINE('',#37402,#37403); +#37402 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#37403 = VECTOR('',#37404,1.); +#37404 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37405 = ORIENTED_EDGE('',*,*,#37406,.T.); +#37406 = EDGE_CURVE('',#37399,#37407,#37409,.T.); +#37407 = VERTEX_POINT('',#37408); +#37408 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#37409 = LINE('',#37410,#37411); +#37410 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#37411 = VECTOR('',#37412,1.); +#37412 = DIRECTION('',(0.,0.,1.)); +#37413 = ORIENTED_EDGE('',*,*,#37414,.T.); +#37414 = EDGE_CURVE('',#37407,#37415,#37417,.T.); +#37415 = VERTEX_POINT('',#37416); +#37416 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#37417 = LINE('',#37418,#37419); +#37418 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#37419 = VECTOR('',#37420,1.); +#37420 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37421 = ORIENTED_EDGE('',*,*,#37422,.T.); +#37422 = EDGE_CURVE('',#37415,#37423,#37425,.T.); +#37423 = VERTEX_POINT('',#37424); +#37424 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37425 = CIRCLE('',#37426,0.1); +#37426 = AXIS2_PLACEMENT_3D('',#37427,#37428,#37429); +#37427 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#37428 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37429 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37430 = ORIENTED_EDGE('',*,*,#37431,.T.); +#37431 = EDGE_CURVE('',#37423,#37432,#37434,.T.); +#37432 = VERTEX_POINT('',#37433); +#37433 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#37434 = LINE('',#37435,#37436); +#37435 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37436 = VECTOR('',#37437,1.); +#37437 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37438 = ORIENTED_EDGE('',*,*,#37439,.T.); +#37439 = EDGE_CURVE('',#37432,#36724,#37440,.T.); +#37440 = CIRCLE('',#37441,0.25); +#37441 = AXIS2_PLACEMENT_3D('',#37442,#37443,#37444); +#37442 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#37443 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37444 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37445 = PLANE('',#37446); +#37446 = AXIS2_PLACEMENT_3D('',#37447,#37448,#37449); +#37447 = CARTESIAN_POINT('',(-0.931323080229,0.75,0.33452717391)); +#37448 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37449 = DIRECTION('',(0.,-0.,1.)); +#37450 = ADVANCED_FACE('',(#37451),#37469,.F.); +#37451 = FACE_BOUND('',#37452,.F.); +#37452 = EDGE_LOOP('',(#37453,#37454,#37462,#37468)); +#37453 = ORIENTED_EDGE('',*,*,#36755,.T.); +#37454 = ORIENTED_EDGE('',*,*,#37455,.T.); +#37455 = EDGE_CURVE('',#36747,#37456,#37458,.T.); +#37456 = VERTEX_POINT('',#37457); +#37457 = CARTESIAN_POINT('',(-0.843471632406,1.15,0.206587955583)); +#37458 = LINE('',#37459,#37460); +#37459 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#37460 = VECTOR('',#37461,1.); +#37461 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37462 = ORIENTED_EDGE('',*,*,#37463,.F.); +#37463 = EDGE_CURVE('',#37382,#37456,#37464,.T.); +#37464 = LINE('',#37465,#37466); +#37465 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#37466 = VECTOR('',#37467,1.); +#37467 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37468 = ORIENTED_EDGE('',*,*,#37381,.F.); +#37469 = PLANE('',#37470); +#37470 = AXIS2_PLACEMENT_3D('',#37471,#37472,#37473); +#37471 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#37472 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#37473 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37474 = ADVANCED_FACE('',(#37475),#37537,.T.); +#37475 = FACE_BOUND('',#37476,.T.); +#37476 = EDGE_LOOP('',(#37477,#37478,#37479,#37480,#37489,#37497,#37505, + #37513,#37522,#37530)); +#37477 = ORIENTED_EDGE('',*,*,#36778,.F.); +#37478 = ORIENTED_EDGE('',*,*,#36746,.T.); +#37479 = ORIENTED_EDGE('',*,*,#37455,.T.); +#37480 = ORIENTED_EDGE('',*,*,#37481,.T.); +#37481 = EDGE_CURVE('',#37456,#37482,#37484,.T.); +#37482 = VERTEX_POINT('',#37483); +#37483 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#37484 = CIRCLE('',#37485,0.25); +#37485 = AXIS2_PLACEMENT_3D('',#37486,#37487,#37488); +#37486 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#37487 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37488 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37489 = ORIENTED_EDGE('',*,*,#37490,.T.); +#37490 = EDGE_CURVE('',#37482,#37491,#37493,.T.); +#37491 = VERTEX_POINT('',#37492); +#37492 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#37493 = LINE('',#37494,#37495); +#37494 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#37495 = VECTOR('',#37496,1.); +#37496 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37497 = ORIENTED_EDGE('',*,*,#37498,.T.); +#37498 = EDGE_CURVE('',#37491,#37499,#37501,.T.); +#37499 = VERTEX_POINT('',#37500); +#37500 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#37501 = LINE('',#37502,#37503); +#37502 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#37503 = VECTOR('',#37504,1.); +#37504 = DIRECTION('',(0.,0.,1.)); +#37505 = ORIENTED_EDGE('',*,*,#37506,.T.); +#37506 = EDGE_CURVE('',#37499,#37507,#37509,.T.); +#37507 = VERTEX_POINT('',#37508); +#37508 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.15)); +#37509 = LINE('',#37510,#37511); +#37510 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#37511 = VECTOR('',#37512,1.); +#37512 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37513 = ORIENTED_EDGE('',*,*,#37514,.T.); +#37514 = EDGE_CURVE('',#37507,#37515,#37517,.T.); +#37515 = VERTEX_POINT('',#37516); +#37516 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#37517 = CIRCLE('',#37518,0.1); +#37518 = AXIS2_PLACEMENT_3D('',#37519,#37520,#37521); +#37519 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#37520 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37521 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37522 = ORIENTED_EDGE('',*,*,#37523,.T.); +#37523 = EDGE_CURVE('',#37515,#37524,#37526,.T.); +#37524 = VERTEX_POINT('',#37525); +#37525 = CARTESIAN_POINT('',(-0.946201938253,1.15,0.518412044417)); +#37526 = LINE('',#37527,#37528); +#37527 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#37528 = VECTOR('',#37529,1.); +#37529 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37530 = ORIENTED_EDGE('',*,*,#37531,.T.); +#37531 = EDGE_CURVE('',#37524,#36614,#37532,.T.); +#37532 = CIRCLE('',#37533,0.25); +#37533 = AXIS2_PLACEMENT_3D('',#37534,#37535,#37536); +#37534 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#37535 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37536 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37537 = PLANE('',#37538); +#37538 = AXIS2_PLACEMENT_3D('',#37539,#37540,#37541); +#37539 = CARTESIAN_POINT('',(-0.931323080229,1.15,0.33452717391)); +#37540 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37541 = DIRECTION('',(0.,-0.,1.)); +#37542 = ADVANCED_FACE('',(#37543),#37612,.F.); +#37543 = FACE_BOUND('',#37544,.F.); +#37544 = EDGE_LOOP('',(#37545,#37546,#37547,#37555,#37564,#37572,#37580, + #37588,#37597,#37605)); +#37545 = ORIENTED_EDGE('',*,*,#36797,.F.); +#37546 = ORIENTED_EDGE('',*,*,#36830,.T.); +#37547 = ORIENTED_EDGE('',*,*,#37548,.T.); +#37548 = EDGE_CURVE('',#36823,#37549,#37551,.T.); +#37549 = VERTEX_POINT('',#37550); +#37550 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#37551 = LINE('',#37552,#37553); +#37552 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#37553 = VECTOR('',#37554,1.); +#37554 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#37555 = ORIENTED_EDGE('',*,*,#37556,.T.); +#37556 = EDGE_CURVE('',#37549,#37557,#37559,.T.); +#37557 = VERTEX_POINT('',#37558); +#37558 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#37559 = CIRCLE('',#37560,0.25); +#37560 = AXIS2_PLACEMENT_3D('',#37561,#37562,#37563); +#37561 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#37562 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37563 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#37564 = ORIENTED_EDGE('',*,*,#37565,.T.); +#37565 = EDGE_CURVE('',#37557,#37566,#37568,.T.); +#37566 = VERTEX_POINT('',#37567); +#37567 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#37568 = LINE('',#37569,#37570); +#37569 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#37570 = VECTOR('',#37571,1.); +#37571 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#37572 = ORIENTED_EDGE('',*,*,#37573,.T.); +#37573 = EDGE_CURVE('',#37566,#37574,#37576,.T.); +#37574 = VERTEX_POINT('',#37575); +#37575 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#37576 = LINE('',#37577,#37578); +#37577 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#37578 = VECTOR('',#37579,1.); +#37579 = DIRECTION('',(0.,0.,1.)); +#37580 = ORIENTED_EDGE('',*,*,#37581,.T.); +#37581 = EDGE_CURVE('',#37574,#37582,#37584,.T.); +#37582 = VERTEX_POINT('',#37583); +#37583 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#37584 = LINE('',#37585,#37586); +#37585 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#37586 = VECTOR('',#37587,1.); +#37587 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37588 = ORIENTED_EDGE('',*,*,#37589,.T.); +#37589 = EDGE_CURVE('',#37582,#37590,#37592,.T.); +#37590 = VERTEX_POINT('',#37591); +#37591 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#37592 = CIRCLE('',#37593,0.1); +#37593 = AXIS2_PLACEMENT_3D('',#37594,#37595,#37596); +#37594 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#37595 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#37596 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#37597 = ORIENTED_EDGE('',*,*,#37598,.T.); +#37598 = EDGE_CURVE('',#37590,#37599,#37601,.T.); +#37599 = VERTEX_POINT('',#37600); +#37600 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#37601 = LINE('',#37602,#37603); +#37602 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#37603 = VECTOR('',#37604,1.); +#37604 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#37605 = ORIENTED_EDGE('',*,*,#37606,.T.); +#37606 = EDGE_CURVE('',#37599,#36558,#37607,.T.); +#37607 = CIRCLE('',#37608,0.25); +#37608 = AXIS2_PLACEMENT_3D('',#37609,#37610,#37611); +#37609 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#37610 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37611 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#37612 = PLANE('',#37613); +#37613 = AXIS2_PLACEMENT_3D('',#37614,#37615,#37616); +#37614 = CARTESIAN_POINT('',(0.931323080229,0.2,0.33452717391)); +#37615 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37616 = DIRECTION('',(0.,0.,1.)); +#37617 = ADVANCED_FACE('',(#37618),#37636,.F.); +#37618 = FACE_BOUND('',#37619,.F.); +#37619 = EDGE_LOOP('',(#37620,#37621,#37629,#37635)); +#37620 = ORIENTED_EDGE('',*,*,#36822,.T.); +#37621 = ORIENTED_EDGE('',*,*,#37622,.T.); +#37622 = EDGE_CURVE('',#36814,#37623,#37625,.T.); +#37623 = VERTEX_POINT('',#37624); +#37624 = CARTESIAN_POINT('',(0.843471632406,-0.2,0.206587955583)); +#37625 = LINE('',#37626,#37627); +#37626 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#37627 = VECTOR('',#37628,1.); +#37628 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#37629 = ORIENTED_EDGE('',*,*,#37630,.F.); +#37630 = EDGE_CURVE('',#37549,#37623,#37631,.T.); +#37631 = LINE('',#37632,#37633); +#37632 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#37633 = VECTOR('',#37634,1.); +#37634 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37635 = ORIENTED_EDGE('',*,*,#37548,.F.); +#37636 = PLANE('',#37637); +#37637 = AXIS2_PLACEMENT_3D('',#37638,#37639,#37640); +#37638 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#37639 = DIRECTION('',(0.987833053268,1.096715000224E-16,0.155518033909) + ); +#37640 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#37641 = ADVANCED_FACE('',(#37642),#37704,.T.); +#37642 = FACE_BOUND('',#37643,.T.); +#37643 = EDGE_LOOP('',(#37644,#37645,#37646,#37647,#37656,#37664,#37672, + #37680,#37689,#37697)); +#37644 = ORIENTED_EDGE('',*,*,#36845,.F.); +#37645 = ORIENTED_EDGE('',*,*,#36813,.T.); +#37646 = ORIENTED_EDGE('',*,*,#37622,.T.); +#37647 = ORIENTED_EDGE('',*,*,#37648,.T.); +#37648 = EDGE_CURVE('',#37623,#37649,#37651,.T.); +#37649 = VERTEX_POINT('',#37650); +#37650 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#37651 = CIRCLE('',#37652,0.25); +#37652 = AXIS2_PLACEMENT_3D('',#37653,#37654,#37655); +#37653 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#37654 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37655 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#37656 = ORIENTED_EDGE('',*,*,#37657,.T.); +#37657 = EDGE_CURVE('',#37649,#37658,#37660,.T.); +#37658 = VERTEX_POINT('',#37659); +#37659 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#37660 = LINE('',#37661,#37662); +#37661 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#37662 = VECTOR('',#37663,1.); +#37663 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#37664 = ORIENTED_EDGE('',*,*,#37665,.T.); +#37665 = EDGE_CURVE('',#37658,#37666,#37668,.T.); +#37666 = VERTEX_POINT('',#37667); +#37667 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#37668 = LINE('',#37669,#37670); +#37669 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#37670 = VECTOR('',#37671,1.); +#37671 = DIRECTION('',(0.,0.,1.)); +#37672 = ORIENTED_EDGE('',*,*,#37673,.T.); +#37673 = EDGE_CURVE('',#37666,#37674,#37676,.T.); +#37674 = VERTEX_POINT('',#37675); +#37675 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.15)); +#37676 = LINE('',#37677,#37678); +#37677 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#37678 = VECTOR('',#37679,1.); +#37679 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37680 = ORIENTED_EDGE('',*,*,#37681,.T.); +#37681 = EDGE_CURVE('',#37674,#37682,#37684,.T.); +#37682 = VERTEX_POINT('',#37683); +#37683 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#37684 = CIRCLE('',#37685,0.1); +#37685 = AXIS2_PLACEMENT_3D('',#37686,#37687,#37688); +#37686 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#37687 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#37688 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#37689 = ORIENTED_EDGE('',*,*,#37690,.T.); +#37690 = EDGE_CURVE('',#37682,#37691,#37693,.T.); +#37691 = VERTEX_POINT('',#37692); +#37692 = CARTESIAN_POINT('',(0.946201938253,-0.2,0.518412044417)); +#37693 = LINE('',#37694,#37695); +#37694 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#37695 = VECTOR('',#37696,1.); +#37696 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#37697 = ORIENTED_EDGE('',*,*,#37698,.T.); +#37698 = EDGE_CURVE('',#37691,#36846,#37699,.T.); +#37699 = CIRCLE('',#37700,0.25); +#37700 = AXIS2_PLACEMENT_3D('',#37701,#37702,#37703); +#37701 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#37702 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37703 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#37704 = PLANE('',#37705); +#37705 = AXIS2_PLACEMENT_3D('',#37706,#37707,#37708); +#37706 = CARTESIAN_POINT('',(0.931323080229,-0.2,0.33452717391)); +#37707 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37708 = DIRECTION('',(0.,0.,1.)); +#37709 = ADVANCED_FACE('',(#37710),#37721,.T.); +#37710 = FACE_BOUND('',#37711,.T.); +#37711 = EDGE_LOOP('',(#37712,#37713,#37714,#37715)); +#37712 = ORIENTED_EDGE('',*,*,#37439,.T.); +#37713 = ORIENTED_EDGE('',*,*,#36946,.T.); +#37714 = ORIENTED_EDGE('',*,*,#37531,.F.); +#37715 = ORIENTED_EDGE('',*,*,#37716,.F.); +#37716 = EDGE_CURVE('',#37432,#37524,#37717,.T.); +#37717 = LINE('',#37718,#37719); +#37718 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#37719 = VECTOR('',#37720,1.); +#37720 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37721 = CYLINDRICAL_SURFACE('',#37722,0.25); +#37722 = AXIS2_PLACEMENT_3D('',#37723,#37724,#37725); +#37723 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#37724 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37725 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37726 = ADVANCED_FACE('',(#37727),#37738,.F.); +#37727 = FACE_BOUND('',#37728,.F.); +#37728 = EDGE_LOOP('',(#37729,#37730,#37736,#37737)); +#37729 = ORIENTED_EDGE('',*,*,#37157,.F.); +#37730 = ORIENTED_EDGE('',*,*,#37731,.T.); +#37731 = EDGE_CURVE('',#36660,#36715,#37732,.T.); +#37732 = LINE('',#37733,#37734); +#37733 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#37734 = VECTOR('',#37735,1.); +#37735 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37736 = ORIENTED_EDGE('',*,*,#37365,.T.); +#37737 = ORIENTED_EDGE('',*,*,#36977,.F.); +#37738 = PLANE('',#37739); +#37739 = AXIS2_PLACEMENT_3D('',#37740,#37741,#37742); +#37740 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#37741 = DIRECTION('',(0.,0.,-1.)); +#37742 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37743 = ADVANCED_FACE('',(#37744,#37773),#37784,.T.); +#37744 = FACE_BOUND('',#37745,.T.); +#37745 = EDGE_LOOP('',(#37746,#37747,#37748,#37749,#37757,#37765,#37771, + #37772)); +#37746 = ORIENTED_EDGE('',*,*,#37052,.F.); +#37747 = ORIENTED_EDGE('',*,*,#37029,.F.); +#37748 = ORIENTED_EDGE('',*,*,#37000,.F.); +#37749 = ORIENTED_EDGE('',*,*,#37750,.F.); +#37750 = EDGE_CURVE('',#37751,#37001,#37753,.T.); +#37751 = VERTEX_POINT('',#37752); +#37752 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37753 = LINE('',#37754,#37755); +#37754 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37755 = VECTOR('',#37756,1.); +#37756 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#37757 = ORIENTED_EDGE('',*,*,#37758,.F.); +#37758 = EDGE_CURVE('',#37759,#37751,#37761,.T.); +#37759 = VERTEX_POINT('',#37760); +#37760 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37761 = LINE('',#37762,#37763); +#37762 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37763 = VECTOR('',#37764,1.); +#37764 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37765 = ORIENTED_EDGE('',*,*,#37766,.F.); +#37766 = EDGE_CURVE('',#37108,#37759,#37767,.T.); +#37767 = LINE('',#37768,#37769); +#37768 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37769 = VECTOR('',#37770,1.); +#37770 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#37771 = ORIENTED_EDGE('',*,*,#37114,.F.); +#37772 = ORIENTED_EDGE('',*,*,#37075,.F.); +#37773 = FACE_BOUND('',#37774,.T.); +#37774 = EDGE_LOOP('',(#37775)); +#37775 = ORIENTED_EDGE('',*,*,#37776,.T.); +#37776 = EDGE_CURVE('',#37777,#37777,#37779,.T.); +#37777 = VERTEX_POINT('',#37778); +#37778 = CARTESIAN_POINT('',(-0.428243103516,1.178243103516,1.2)); +#37779 = CIRCLE('',#37780,5.E-02); +#37780 = AXIS2_PLACEMENT_3D('',#37781,#37782,#37783); +#37781 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#37782 = DIRECTION('',(0.,-0.,-1.)); +#37783 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37784 = PLANE('',#37785); +#37785 = AXIS2_PLACEMENT_3D('',#37786,#37787,#37788); +#37786 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37787 = DIRECTION('',(0.,0.,1.)); +#37788 = DIRECTION('',(0.369013679242,-0.929423963825,0.)); +#37789 = ADVANCED_FACE('',(#37790),#37800,.F.); +#37790 = FACE_BOUND('',#37791,.F.); +#37791 = EDGE_LOOP('',(#37792,#37793,#37794,#37795)); +#37792 = ORIENTED_EDGE('',*,*,#37164,.T.); +#37793 = ORIENTED_EDGE('',*,*,#37008,.T.); +#37794 = ORIENTED_EDGE('',*,*,#37750,.F.); +#37795 = ORIENTED_EDGE('',*,*,#37796,.F.); +#37796 = EDGE_CURVE('',#37165,#37751,#37797,.T.); +#37797 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37798,#37799),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37798 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37799 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37800 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37801,#37802) + ,(#37803,#37804 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37801 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37802 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37803 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#37804 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37805 = ADVANCED_FACE('',(#37806),#37816,.F.); +#37806 = FACE_BOUND('',#37807,.F.); +#37807 = EDGE_LOOP('',(#37808,#37809,#37814,#37815)); +#37808 = ORIENTED_EDGE('',*,*,#37180,.T.); +#37809 = ORIENTED_EDGE('',*,*,#37810,.T.); +#37810 = EDGE_CURVE('',#37173,#37759,#37811,.T.); +#37811 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37812,#37813),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37812 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37813 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37814 = ORIENTED_EDGE('',*,*,#37766,.F.); +#37815 = ORIENTED_EDGE('',*,*,#37107,.F.); +#37816 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37817,#37818) + ,(#37819,#37820 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37817 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37818 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37819 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37820 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37821 = ADVANCED_FACE('',(#37822),#37833,.T.); +#37822 = FACE_BOUND('',#37823,.T.); +#37823 = EDGE_LOOP('',(#37824,#37825,#37826,#37827)); +#37824 = ORIENTED_EDGE('',*,*,#37606,.T.); +#37825 = ORIENTED_EDGE('',*,*,#37130,.T.); +#37826 = ORIENTED_EDGE('',*,*,#37698,.F.); +#37827 = ORIENTED_EDGE('',*,*,#37828,.F.); +#37828 = EDGE_CURVE('',#37599,#37691,#37829,.T.); +#37829 = LINE('',#37830,#37831); +#37830 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#37831 = VECTOR('',#37832,1.); +#37832 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37833 = CYLINDRICAL_SURFACE('',#37834,0.25); +#37834 = AXIS2_PLACEMENT_3D('',#37835,#37836,#37837); +#37835 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#37836 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#37837 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#37838 = ADVANCED_FACE('',(#37839),#37845,.F.); +#37839 = FACE_BOUND('',#37840,.F.); +#37840 = EDGE_LOOP('',(#37841,#37842,#37843,#37844)); +#37841 = ORIENTED_EDGE('',*,*,#37172,.T.); +#37842 = ORIENTED_EDGE('',*,*,#37796,.T.); +#37843 = ORIENTED_EDGE('',*,*,#37758,.F.); +#37844 = ORIENTED_EDGE('',*,*,#37810,.F.); +#37845 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37846,#37847) + ,(#37848,#37849 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37846 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37847 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37848 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37849 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37850 = ADVANCED_FACE('',(#37851),#37862,.T.); +#37851 = FACE_BOUND('',#37852,.T.); +#37852 = EDGE_LOOP('',(#37853,#37854,#37855,#37856)); +#37853 = ORIENTED_EDGE('',*,*,#37255,.T.); +#37854 = ORIENTED_EDGE('',*,*,#37731,.T.); +#37855 = ORIENTED_EDGE('',*,*,#37347,.F.); +#37856 = ORIENTED_EDGE('',*,*,#37857,.F.); +#37857 = EDGE_CURVE('',#37248,#37340,#37858,.T.); +#37858 = LINE('',#37859,#37860); +#37859 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#37860 = VECTOR('',#37861,1.); +#37861 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37862 = CYLINDRICAL_SURFACE('',#37863,0.25); +#37863 = AXIS2_PLACEMENT_3D('',#37864,#37865,#37866); +#37864 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#37865 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37866 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37867 = ADVANCED_FACE('',(#37868),#37879,.F.); +#37868 = FACE_BOUND('',#37869,.F.); +#37869 = EDGE_LOOP('',(#37870,#37876,#37877,#37878)); +#37870 = ORIENTED_EDGE('',*,*,#37871,.T.); +#37871 = EDGE_CURVE('',#37239,#37331,#37872,.T.); +#37872 = LINE('',#37873,#37874); +#37873 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37874 = VECTOR('',#37875,1.); +#37875 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37876 = ORIENTED_EDGE('',*,*,#37339,.T.); +#37877 = ORIENTED_EDGE('',*,*,#37857,.F.); +#37878 = ORIENTED_EDGE('',*,*,#37247,.F.); +#37879 = PLANE('',#37880); +#37880 = AXIS2_PLACEMENT_3D('',#37881,#37882,#37883); +#37881 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37882 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#37883 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37884 = ADVANCED_FACE('',(#37885),#37896,.F.); +#37885 = FACE_BOUND('',#37886,.F.); +#37886 = EDGE_LOOP('',(#37887,#37893,#37894,#37895)); +#37887 = ORIENTED_EDGE('',*,*,#37888,.T.); +#37888 = EDGE_CURVE('',#37231,#37323,#37889,.T.); +#37889 = LINE('',#37890,#37891); +#37890 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#37891 = VECTOR('',#37892,1.); +#37892 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37893 = ORIENTED_EDGE('',*,*,#37330,.T.); +#37894 = ORIENTED_EDGE('',*,*,#37871,.F.); +#37895 = ORIENTED_EDGE('',*,*,#37238,.F.); +#37896 = CYLINDRICAL_SURFACE('',#37897,0.1); +#37897 = AXIS2_PLACEMENT_3D('',#37898,#37899,#37900); +#37898 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37899 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37900 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37901 = ADVANCED_FACE('',(#37902),#37913,.F.); +#37902 = FACE_BOUND('',#37903,.F.); +#37903 = EDGE_LOOP('',(#37904,#37910,#37911,#37912)); +#37904 = ORIENTED_EDGE('',*,*,#37905,.T.); +#37905 = EDGE_CURVE('',#37223,#37315,#37906,.T.); +#37906 = LINE('',#37907,#37908); +#37907 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37908 = VECTOR('',#37909,1.); +#37909 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37910 = ORIENTED_EDGE('',*,*,#37322,.T.); +#37911 = ORIENTED_EDGE('',*,*,#37888,.F.); +#37912 = ORIENTED_EDGE('',*,*,#37230,.F.); +#37913 = PLANE('',#37914); +#37914 = AXIS2_PLACEMENT_3D('',#37915,#37916,#37917); +#37915 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37916 = DIRECTION('',(0.,0.,-1.)); +#37917 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37918 = ADVANCED_FACE('',(#37919),#37930,.F.); +#37919 = FACE_BOUND('',#37920,.F.); +#37920 = EDGE_LOOP('',(#37921,#37927,#37928,#37929)); +#37921 = ORIENTED_EDGE('',*,*,#37922,.T.); +#37922 = EDGE_CURVE('',#37215,#37307,#37923,.T.); +#37923 = LINE('',#37924,#37925); +#37924 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37925 = VECTOR('',#37926,1.); +#37926 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37927 = ORIENTED_EDGE('',*,*,#37314,.T.); +#37928 = ORIENTED_EDGE('',*,*,#37905,.F.); +#37929 = ORIENTED_EDGE('',*,*,#37222,.F.); +#37930 = PLANE('',#37931); +#37931 = AXIS2_PLACEMENT_3D('',#37932,#37933,#37934); +#37932 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37933 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37934 = DIRECTION('',(0.,0.,1.)); +#37935 = ADVANCED_FACE('',(#37936),#37947,.F.); +#37936 = FACE_BOUND('',#37937,.F.); +#37937 = EDGE_LOOP('',(#37938,#37944,#37945,#37946)); +#37938 = ORIENTED_EDGE('',*,*,#37939,.T.); +#37939 = EDGE_CURVE('',#37206,#37298,#37940,.T.); +#37940 = LINE('',#37941,#37942); +#37941 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37942 = VECTOR('',#37943,1.); +#37943 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37944 = ORIENTED_EDGE('',*,*,#37306,.T.); +#37945 = ORIENTED_EDGE('',*,*,#37922,.F.); +#37946 = ORIENTED_EDGE('',*,*,#37214,.F.); +#37947 = PLANE('',#37948); +#37948 = AXIS2_PLACEMENT_3D('',#37949,#37950,#37951); +#37949 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37950 = DIRECTION('',(0.,0.,1.)); +#37951 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37952 = ADVANCED_FACE('',(#37953),#37959,.T.); +#37953 = FACE_BOUND('',#37954,.T.); +#37954 = EDGE_LOOP('',(#37955,#37956,#37957,#37958)); +#37955 = ORIENTED_EDGE('',*,*,#37205,.T.); +#37956 = ORIENTED_EDGE('',*,*,#37939,.T.); +#37957 = ORIENTED_EDGE('',*,*,#37297,.F.); +#37958 = ORIENTED_EDGE('',*,*,#37279,.F.); +#37959 = CYLINDRICAL_SURFACE('',#37960,0.25); +#37960 = AXIS2_PLACEMENT_3D('',#37961,#37962,#37963); +#37961 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37962 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37963 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37964 = ADVANCED_FACE('',(#37965),#37976,.F.); +#37965 = FACE_BOUND('',#37966,.F.); +#37966 = EDGE_LOOP('',(#37967,#37973,#37974,#37975)); +#37967 = ORIENTED_EDGE('',*,*,#37968,.T.); +#37968 = EDGE_CURVE('',#37423,#37515,#37969,.T.); +#37969 = LINE('',#37970,#37971); +#37970 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37971 = VECTOR('',#37972,1.); +#37972 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37973 = ORIENTED_EDGE('',*,*,#37523,.T.); +#37974 = ORIENTED_EDGE('',*,*,#37716,.F.); +#37975 = ORIENTED_EDGE('',*,*,#37431,.F.); +#37976 = PLANE('',#37977); +#37977 = AXIS2_PLACEMENT_3D('',#37978,#37979,#37980); +#37978 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37979 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#37980 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37981 = ADVANCED_FACE('',(#37982),#37993,.F.); +#37982 = FACE_BOUND('',#37983,.F.); +#37983 = EDGE_LOOP('',(#37984,#37990,#37991,#37992)); +#37984 = ORIENTED_EDGE('',*,*,#37985,.T.); +#37985 = EDGE_CURVE('',#37415,#37507,#37986,.T.); +#37986 = LINE('',#37987,#37988); +#37987 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#37988 = VECTOR('',#37989,1.); +#37989 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37990 = ORIENTED_EDGE('',*,*,#37514,.T.); +#37991 = ORIENTED_EDGE('',*,*,#37968,.F.); +#37992 = ORIENTED_EDGE('',*,*,#37422,.F.); +#37993 = CYLINDRICAL_SURFACE('',#37994,0.1); +#37994 = AXIS2_PLACEMENT_3D('',#37995,#37996,#37997); +#37995 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#37996 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37997 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37998 = ADVANCED_FACE('',(#37999),#38010,.F.); +#37999 = FACE_BOUND('',#38000,.F.); +#38000 = EDGE_LOOP('',(#38001,#38007,#38008,#38009)); +#38001 = ORIENTED_EDGE('',*,*,#38002,.T.); +#38002 = EDGE_CURVE('',#37407,#37499,#38003,.T.); +#38003 = LINE('',#38004,#38005); +#38004 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#38005 = VECTOR('',#38006,1.); +#38006 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38007 = ORIENTED_EDGE('',*,*,#37506,.T.); +#38008 = ORIENTED_EDGE('',*,*,#37985,.F.); +#38009 = ORIENTED_EDGE('',*,*,#37414,.F.); +#38010 = PLANE('',#38011); +#38011 = AXIS2_PLACEMENT_3D('',#38012,#38013,#38014); +#38012 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#38013 = DIRECTION('',(0.,0.,-1.)); +#38014 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#38015 = ADVANCED_FACE('',(#38016),#38027,.F.); +#38016 = FACE_BOUND('',#38017,.F.); +#38017 = EDGE_LOOP('',(#38018,#38024,#38025,#38026)); +#38018 = ORIENTED_EDGE('',*,*,#38019,.T.); +#38019 = EDGE_CURVE('',#37399,#37491,#38020,.T.); +#38020 = LINE('',#38021,#38022); +#38021 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#38022 = VECTOR('',#38023,1.); +#38023 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38024 = ORIENTED_EDGE('',*,*,#37498,.T.); +#38025 = ORIENTED_EDGE('',*,*,#38002,.F.); +#38026 = ORIENTED_EDGE('',*,*,#37406,.F.); +#38027 = PLANE('',#38028); +#38028 = AXIS2_PLACEMENT_3D('',#38029,#38030,#38031); +#38029 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#38030 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#38031 = DIRECTION('',(0.,0.,1.)); +#38032 = ADVANCED_FACE('',(#38033),#38044,.F.); +#38033 = FACE_BOUND('',#38034,.F.); +#38034 = EDGE_LOOP('',(#38035,#38041,#38042,#38043)); +#38035 = ORIENTED_EDGE('',*,*,#38036,.T.); +#38036 = EDGE_CURVE('',#37390,#37482,#38037,.T.); +#38037 = LINE('',#38038,#38039); +#38038 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#38039 = VECTOR('',#38040,1.); +#38040 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38041 = ORIENTED_EDGE('',*,*,#37490,.T.); +#38042 = ORIENTED_EDGE('',*,*,#38019,.F.); +#38043 = ORIENTED_EDGE('',*,*,#37398,.F.); +#38044 = PLANE('',#38045); +#38045 = AXIS2_PLACEMENT_3D('',#38046,#38047,#38048); +#38046 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#38047 = DIRECTION('',(0.,0.,1.)); +#38048 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38049 = ADVANCED_FACE('',(#38050),#38056,.T.); +#38050 = FACE_BOUND('',#38051,.T.); +#38051 = EDGE_LOOP('',(#38052,#38053,#38054,#38055)); +#38052 = ORIENTED_EDGE('',*,*,#37389,.T.); +#38053 = ORIENTED_EDGE('',*,*,#38036,.T.); +#38054 = ORIENTED_EDGE('',*,*,#37481,.F.); +#38055 = ORIENTED_EDGE('',*,*,#37463,.F.); +#38056 = CYLINDRICAL_SURFACE('',#38057,0.25); +#38057 = AXIS2_PLACEMENT_3D('',#38058,#38059,#38060); +#38058 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#38059 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#38060 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#38061 = ADVANCED_FACE('',(#38062),#38073,.F.); +#38062 = FACE_BOUND('',#38063,.F.); +#38063 = EDGE_LOOP('',(#38064,#38070,#38071,#38072)); +#38064 = ORIENTED_EDGE('',*,*,#38065,.T.); +#38065 = EDGE_CURVE('',#37590,#37682,#38066,.T.); +#38066 = LINE('',#38067,#38068); +#38067 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#38068 = VECTOR('',#38069,1.); +#38069 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38070 = ORIENTED_EDGE('',*,*,#37690,.T.); +#38071 = ORIENTED_EDGE('',*,*,#37828,.F.); +#38072 = ORIENTED_EDGE('',*,*,#37598,.F.); +#38073 = PLANE('',#38074); +#38074 = AXIS2_PLACEMENT_3D('',#38075,#38076,#38077); +#38075 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#38076 = DIRECTION('',(-0.987833053268,-1.096715000224E-16, + -0.155518033909)); +#38077 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#38078 = ADVANCED_FACE('',(#38079),#38090,.F.); +#38079 = FACE_BOUND('',#38080,.F.); +#38080 = EDGE_LOOP('',(#38081,#38087,#38088,#38089)); +#38081 = ORIENTED_EDGE('',*,*,#38082,.T.); +#38082 = EDGE_CURVE('',#37582,#37674,#38083,.T.); +#38083 = LINE('',#38084,#38085); +#38084 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#38085 = VECTOR('',#38086,1.); +#38086 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38087 = ORIENTED_EDGE('',*,*,#37681,.T.); +#38088 = ORIENTED_EDGE('',*,*,#38065,.F.); +#38089 = ORIENTED_EDGE('',*,*,#37589,.F.); +#38090 = CYLINDRICAL_SURFACE('',#38091,0.1); +#38091 = AXIS2_PLACEMENT_3D('',#38092,#38093,#38094); +#38092 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#38093 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38094 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#38095 = ADVANCED_FACE('',(#38096),#38107,.F.); +#38096 = FACE_BOUND('',#38097,.F.); +#38097 = EDGE_LOOP('',(#38098,#38104,#38105,#38106)); +#38098 = ORIENTED_EDGE('',*,*,#38099,.T.); +#38099 = EDGE_CURVE('',#37574,#37666,#38100,.T.); +#38100 = LINE('',#38101,#38102); +#38101 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#38102 = VECTOR('',#38103,1.); +#38103 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38104 = ORIENTED_EDGE('',*,*,#37673,.T.); +#38105 = ORIENTED_EDGE('',*,*,#38082,.F.); +#38106 = ORIENTED_EDGE('',*,*,#37581,.F.); +#38107 = PLANE('',#38108); +#38108 = AXIS2_PLACEMENT_3D('',#38109,#38110,#38111); +#38109 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#38110 = DIRECTION('',(0.,0.,-1.)); +#38111 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#38112 = ADVANCED_FACE('',(#38113),#38124,.F.); +#38113 = FACE_BOUND('',#38114,.F.); +#38114 = EDGE_LOOP('',(#38115,#38121,#38122,#38123)); +#38115 = ORIENTED_EDGE('',*,*,#38116,.T.); +#38116 = EDGE_CURVE('',#37566,#37658,#38117,.T.); +#38117 = LINE('',#38118,#38119); +#38118 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#38119 = VECTOR('',#38120,1.); +#38120 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38121 = ORIENTED_EDGE('',*,*,#37665,.T.); +#38122 = ORIENTED_EDGE('',*,*,#38099,.F.); +#38123 = ORIENTED_EDGE('',*,*,#37573,.F.); +#38124 = PLANE('',#38125); +#38125 = AXIS2_PLACEMENT_3D('',#38126,#38127,#38128); +#38126 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#38127 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38128 = DIRECTION('',(0.,0.,1.)); +#38129 = ADVANCED_FACE('',(#38130),#38141,.F.); +#38130 = FACE_BOUND('',#38131,.F.); +#38131 = EDGE_LOOP('',(#38132,#38138,#38139,#38140)); +#38132 = ORIENTED_EDGE('',*,*,#38133,.T.); +#38133 = EDGE_CURVE('',#37557,#37649,#38134,.T.); +#38134 = LINE('',#38135,#38136); +#38135 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#38136 = VECTOR('',#38137,1.); +#38137 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38138 = ORIENTED_EDGE('',*,*,#37657,.T.); +#38139 = ORIENTED_EDGE('',*,*,#38116,.F.); +#38140 = ORIENTED_EDGE('',*,*,#37565,.F.); +#38141 = PLANE('',#38142); +#38142 = AXIS2_PLACEMENT_3D('',#38143,#38144,#38145); +#38143 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#38144 = DIRECTION('',(0.,0.,1.)); +#38145 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#38146 = ADVANCED_FACE('',(#38147),#38153,.T.); +#38147 = FACE_BOUND('',#38148,.T.); +#38148 = EDGE_LOOP('',(#38149,#38150,#38151,#38152)); +#38149 = ORIENTED_EDGE('',*,*,#37556,.T.); +#38150 = ORIENTED_EDGE('',*,*,#38133,.T.); +#38151 = ORIENTED_EDGE('',*,*,#37648,.F.); +#38152 = ORIENTED_EDGE('',*,*,#37630,.F.); +#38153 = CYLINDRICAL_SURFACE('',#38154,0.25); +#38154 = AXIS2_PLACEMENT_3D('',#38155,#38156,#38157); +#38155 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#38156 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38157 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#38158 = ADVANCED_FACE('',(#38159),#38162,.F.); +#38159 = FACE_BOUND('',#38160,.T.); +#38160 = EDGE_LOOP('',(#38161)); +#38161 = ORIENTED_EDGE('',*,*,#37776,.F.); +#38162 = PLANE('',#38163); +#38163 = AXIS2_PLACEMENT_3D('',#38164,#38165,#38166); +#38164 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#38165 = DIRECTION('',(0.,0.,-1.)); +#38166 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#38171)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#38168,#38169,#38170)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#38168 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#38169 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#38170 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#38171 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#38168, + 'distance_accuracy_value','confusion accuracy'); +#38172 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#38173,#38175); +#38173 = ( REPRESENTATION_RELATIONSHIP('','',#36184,#36161) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#38174) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#38174 = ITEM_DEFINED_TRANSFORMATION('','',#11,#36162); +#38175 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #38176); +#38176 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','=>[0:1:1:21]','',#36156, + #36179,$); +#38177 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#36181)); +#38178 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#38179,#38181); +#38179 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#38180) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#38180 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83); +#38181 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #38182); +#38182 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','Rg','',#5,#523,$); +#38183 = SHAPE_DEFINITION_REPRESENTATION(#38184,#38190); +#38184 = PRODUCT_DEFINITION_SHAPE('','',#38185); +#38185 = PRODUCT_DEFINITION('design','',#38186,#38189); +#38186 = PRODUCT_DEFINITION_FORMATION('','',#38187); +#38187 = PRODUCT('SOIC-8_3.9x4.9mm_P1.27mm','SOIC-8_3.9x4.9mm_P1.27mm', + '',(#38188)); +#38188 = PRODUCT_CONTEXT('',#2,'mechanical'); +#38189 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#38190 = SHAPE_REPRESENTATION('',(#11,#38191),#38195); +#38191 = AXIS2_PLACEMENT_3D('',#38192,#38193,#38194); +#38192 = CARTESIAN_POINT('',(0.,0.,0.)); +#38193 = DIRECTION('',(0.,0.,1.)); +#38194 = DIRECTION('',(1.,0.,-0.)); +#38195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#38199)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#38196,#38197,#38198)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#38196 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#38197 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#38198 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#38199 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#38196, + 'distance_accuracy_value','confusion accuracy'); +#38200 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#38201,#38203); +#38201 = ( REPRESENTATION_RELATIONSHIP('','',#38190,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#38202) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#38202 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87); +#38203 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #38204); +#38204 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','Q7','',#5,#38185,$); +#38205 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#38187)); +#38206 = SHAPE_DEFINITION_REPRESENTATION(#38207,#38213); +#38207 = PRODUCT_DEFINITION_SHAPE('','',#38208); +#38208 = PRODUCT_DEFINITION('design','',#38209,#38212); +#38209 = PRODUCT_DEFINITION_FORMATION('','',#38210); +#38210 = PRODUCT('SOIC-8_3.9x4.9mm_P1.27mm','SOIC-8_3.9x4.9mm_P1.27mm', + '',(#38211)); +#38211 = PRODUCT_CONTEXT('',#2,'mechanical'); +#38212 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#38213 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#38214),#42682); +#38214 = MANIFOLD_SOLID_BREP('',#38215); +#38215 = CLOSED_SHELL('',(#38216,#38254,#38317,#38340,#38369,#38392, + #38479,#38566,#38589,#38612,#38629,#38652,#38740,#38756,#38786, + #38817,#38848,#38879,#38910,#38941,#38972,#39003,#39020,#39037, + #39068,#39099,#39130,#39161,#39192,#39223,#39254,#39284,#39307, + #39330,#39347,#39392,#39478,#39501,#39524,#39547,#39634,#39672, + #39721,#39813,#39838,#39922,#39944,#40036,#40061,#40145,#40167, + #40259,#40284,#40368,#40385,#40470,#40495,#40572,#40657,#40682, + #40759,#40776,#40868,#40893,#40977,#40999,#41091,#41116,#41200, + #41222,#41314,#41339,#41423,#41440,#41459,#41478,#41497,#41543, + #41559,#41578,#41597,#41616,#41632,#41649,#41661,#41678,#41695, + #41712,#41729,#41746,#41763,#41780,#41792,#41809,#41826,#41843, + #41860,#41877,#41894,#41911,#41923,#41940,#41957,#41974,#41991, + #42008,#42025,#42042,#42054,#42071,#42088,#42105,#42122,#42139, + #42156,#42168,#42185,#42202,#42219,#42236,#42253,#42270,#42282, + #42299,#42316,#42333,#42350,#42367,#42384,#42401,#42413,#42430, + #42447,#42464,#42481,#42498,#42515,#42532,#42544,#42561,#42578, + #42595,#42612,#42629,#42646,#42663,#42675)); +#38216 = ADVANCED_FACE('',(#38217),#38249,.F.); +#38217 = FACE_BOUND('',#38218,.F.); +#38218 = EDGE_LOOP('',(#38219,#38229,#38236,#38244)); +#38219 = ORIENTED_EDGE('',*,*,#38220,.T.); +#38220 = EDGE_CURVE('',#38221,#38223,#38225,.T.); +#38221 = VERTEX_POINT('',#38222); +#38222 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38223 = VERTEX_POINT('',#38224); +#38224 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38225 = LINE('',#38226,#38227); +#38226 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38227 = VECTOR('',#38228,1.); +#38228 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38229 = ORIENTED_EDGE('',*,*,#38230,.T.); +#38230 = EDGE_CURVE('',#38223,#38231,#38233,.T.); +#38231 = VERTEX_POINT('',#38232); +#38232 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38233 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38234,#38235),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38234 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38235 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38236 = ORIENTED_EDGE('',*,*,#38237,.F.); +#38237 = EDGE_CURVE('',#38238,#38231,#38240,.T.); +#38238 = VERTEX_POINT('',#38239); +#38239 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38240 = LINE('',#38241,#38242); +#38241 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38242 = VECTOR('',#38243,1.); +#38243 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38244 = ORIENTED_EDGE('',*,*,#38245,.F.); +#38245 = EDGE_CURVE('',#38221,#38238,#38246,.T.); +#38246 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38247,#38248),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38247 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38248 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38249 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38250,#38251) + ,(#38252,#38253 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38250 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38251 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38252 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38253 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38254 = ADVANCED_FACE('',(#38255),#38312,.F.); +#38255 = FACE_BOUND('',#38256,.T.); +#38256 = EDGE_LOOP('',(#38257,#38258,#38266,#38274,#38282,#38290,#38298, + #38306)); +#38257 = ORIENTED_EDGE('',*,*,#38220,.T.); +#38258 = ORIENTED_EDGE('',*,*,#38259,.T.); +#38259 = EDGE_CURVE('',#38223,#38260,#38262,.T.); +#38260 = VERTEX_POINT('',#38261); +#38261 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38262 = LINE('',#38263,#38264); +#38263 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38264 = VECTOR('',#38265,1.); +#38265 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38266 = ORIENTED_EDGE('',*,*,#38267,.T.); +#38267 = EDGE_CURVE('',#38260,#38268,#38270,.T.); +#38268 = VERTEX_POINT('',#38269); +#38269 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38270 = LINE('',#38271,#38272); +#38271 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38272 = VECTOR('',#38273,1.); +#38273 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38274 = ORIENTED_EDGE('',*,*,#38275,.T.); +#38275 = EDGE_CURVE('',#38268,#38276,#38278,.T.); +#38276 = VERTEX_POINT('',#38277); +#38277 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38278 = LINE('',#38279,#38280); +#38279 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38280 = VECTOR('',#38281,1.); +#38281 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#38282 = ORIENTED_EDGE('',*,*,#38283,.T.); +#38283 = EDGE_CURVE('',#38276,#38284,#38286,.T.); +#38284 = VERTEX_POINT('',#38285); +#38285 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38286 = LINE('',#38287,#38288); +#38287 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38288 = VECTOR('',#38289,1.); +#38289 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38290 = ORIENTED_EDGE('',*,*,#38291,.T.); +#38291 = EDGE_CURVE('',#38284,#38292,#38294,.T.); +#38292 = VERTEX_POINT('',#38293); +#38293 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38294 = LINE('',#38295,#38296); +#38295 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38296 = VECTOR('',#38297,1.); +#38297 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#38298 = ORIENTED_EDGE('',*,*,#38299,.T.); +#38299 = EDGE_CURVE('',#38292,#38300,#38302,.T.); +#38300 = VERTEX_POINT('',#38301); +#38301 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38302 = LINE('',#38303,#38304); +#38303 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38304 = VECTOR('',#38305,1.); +#38305 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38306 = ORIENTED_EDGE('',*,*,#38307,.T.); +#38307 = EDGE_CURVE('',#38300,#38221,#38308,.T.); +#38308 = LINE('',#38309,#38310); +#38309 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38310 = VECTOR('',#38311,1.); +#38311 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38312 = PLANE('',#38313); +#38313 = AXIS2_PLACEMENT_3D('',#38314,#38315,#38316); +#38314 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38315 = DIRECTION('',(0.,0.,1.)); +#38316 = DIRECTION('',(0.592513131498,-0.805560791625,0.)); +#38317 = ADVANCED_FACE('',(#38318),#38335,.F.); +#38318 = FACE_BOUND('',#38319,.F.); +#38319 = EDGE_LOOP('',(#38320,#38321,#38328,#38334)); +#38320 = ORIENTED_EDGE('',*,*,#38259,.T.); +#38321 = ORIENTED_EDGE('',*,*,#38322,.T.); +#38322 = EDGE_CURVE('',#38260,#38323,#38325,.T.); +#38323 = VERTEX_POINT('',#38324); +#38324 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38325 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38326,#38327),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38326 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38327 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38328 = ORIENTED_EDGE('',*,*,#38329,.F.); +#38329 = EDGE_CURVE('',#38231,#38323,#38330,.T.); +#38330 = LINE('',#38331,#38332); +#38331 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38332 = VECTOR('',#38333,1.); +#38333 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38334 = ORIENTED_EDGE('',*,*,#38230,.F.); +#38335 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38336,#38337) + ,(#38338,#38339 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38336 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38337 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38338 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38339 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38340 = ADVANCED_FACE('',(#38341),#38364,.F.); +#38341 = FACE_BOUND('',#38342,.F.); +#38342 = EDGE_LOOP('',(#38343,#38344,#38351,#38359)); +#38343 = ORIENTED_EDGE('',*,*,#38237,.T.); +#38344 = ORIENTED_EDGE('',*,*,#38345,.T.); +#38345 = EDGE_CURVE('',#38231,#38346,#38348,.T.); +#38346 = VERTEX_POINT('',#38347); +#38347 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38348 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38349,#38350),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38349 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38350 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38351 = ORIENTED_EDGE('',*,*,#38352,.F.); +#38352 = EDGE_CURVE('',#38353,#38346,#38355,.T.); +#38353 = VERTEX_POINT('',#38354); +#38354 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38355 = LINE('',#38356,#38357); +#38356 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38357 = VECTOR('',#38358,1.); +#38358 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38359 = ORIENTED_EDGE('',*,*,#38360,.F.); +#38360 = EDGE_CURVE('',#38238,#38353,#38361,.T.); +#38361 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38362,#38363),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38362 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38363 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38364 = PLANE('',#38365); +#38365 = AXIS2_PLACEMENT_3D('',#38366,#38367,#38368); +#38366 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38367 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38368 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38369 = ADVANCED_FACE('',(#38370),#38387,.F.); +#38370 = FACE_BOUND('',#38371,.F.); +#38371 = EDGE_LOOP('',(#38372,#38373,#38374,#38382)); +#38372 = ORIENTED_EDGE('',*,*,#38307,.T.); +#38373 = ORIENTED_EDGE('',*,*,#38245,.T.); +#38374 = ORIENTED_EDGE('',*,*,#38375,.F.); +#38375 = EDGE_CURVE('',#38376,#38238,#38378,.T.); +#38376 = VERTEX_POINT('',#38377); +#38377 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38378 = LINE('',#38379,#38380); +#38379 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38380 = VECTOR('',#38381,1.); +#38381 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38382 = ORIENTED_EDGE('',*,*,#38383,.F.); +#38383 = EDGE_CURVE('',#38300,#38376,#38384,.T.); +#38384 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38385,#38386),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38385 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38386 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38387 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38388,#38389) + ,(#38390,#38391 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38388 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38389 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38390 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38391 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38392 = ADVANCED_FACE('',(#38393),#38474,.F.); +#38393 = FACE_BOUND('',#38394,.F.); +#38394 = EDGE_LOOP('',(#38395,#38396,#38397,#38405,#38413,#38421,#38429, + #38437,#38445,#38453,#38461,#38469)); +#38395 = ORIENTED_EDGE('',*,*,#38299,.T.); +#38396 = ORIENTED_EDGE('',*,*,#38383,.T.); +#38397 = ORIENTED_EDGE('',*,*,#38398,.F.); +#38398 = EDGE_CURVE('',#38399,#38376,#38401,.T.); +#38399 = VERTEX_POINT('',#38400); +#38400 = CARTESIAN_POINT('',(-1.95,2.11,0.825)); +#38401 = LINE('',#38402,#38403); +#38402 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38403 = VECTOR('',#38404,1.); +#38404 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38405 = ORIENTED_EDGE('',*,*,#38406,.F.); +#38406 = EDGE_CURVE('',#38407,#38399,#38409,.T.); +#38407 = VERTEX_POINT('',#38408); +#38408 = CARTESIAN_POINT('',(-1.95,1.7,0.825)); +#38409 = LINE('',#38410,#38411); +#38410 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38411 = VECTOR('',#38412,1.); +#38412 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38413 = ORIENTED_EDGE('',*,*,#38414,.F.); +#38414 = EDGE_CURVE('',#38415,#38407,#38417,.T.); +#38415 = VERTEX_POINT('',#38416); +#38416 = CARTESIAN_POINT('',(-1.95,0.84,0.825)); +#38417 = LINE('',#38418,#38419); +#38418 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38419 = VECTOR('',#38420,1.); +#38420 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38421 = ORIENTED_EDGE('',*,*,#38422,.F.); +#38422 = EDGE_CURVE('',#38423,#38415,#38425,.T.); +#38423 = VERTEX_POINT('',#38424); +#38424 = CARTESIAN_POINT('',(-1.95,0.43,0.825)); +#38425 = LINE('',#38426,#38427); +#38426 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38427 = VECTOR('',#38428,1.); +#38428 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38429 = ORIENTED_EDGE('',*,*,#38430,.F.); +#38430 = EDGE_CURVE('',#38431,#38423,#38433,.T.); +#38431 = VERTEX_POINT('',#38432); +#38432 = CARTESIAN_POINT('',(-1.95,-0.43,0.825)); +#38433 = LINE('',#38434,#38435); +#38434 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38435 = VECTOR('',#38436,1.); +#38436 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38437 = ORIENTED_EDGE('',*,*,#38438,.F.); +#38438 = EDGE_CURVE('',#38439,#38431,#38441,.T.); +#38439 = VERTEX_POINT('',#38440); +#38440 = CARTESIAN_POINT('',(-1.95,-0.84,0.825)); +#38441 = LINE('',#38442,#38443); +#38442 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38443 = VECTOR('',#38444,1.); +#38444 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38445 = ORIENTED_EDGE('',*,*,#38446,.F.); +#38446 = EDGE_CURVE('',#38447,#38439,#38449,.T.); +#38447 = VERTEX_POINT('',#38448); +#38448 = CARTESIAN_POINT('',(-1.95,-1.7,0.825)); +#38449 = LINE('',#38450,#38451); +#38450 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38451 = VECTOR('',#38452,1.); +#38452 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38453 = ORIENTED_EDGE('',*,*,#38454,.F.); +#38454 = EDGE_CURVE('',#38455,#38447,#38457,.T.); +#38455 = VERTEX_POINT('',#38456); +#38456 = CARTESIAN_POINT('',(-1.95,-2.11,0.825)); +#38457 = LINE('',#38458,#38459); +#38458 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38459 = VECTOR('',#38460,1.); +#38460 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38461 = ORIENTED_EDGE('',*,*,#38462,.F.); +#38462 = EDGE_CURVE('',#38463,#38455,#38465,.T.); +#38463 = VERTEX_POINT('',#38464); +#38464 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38465 = LINE('',#38466,#38467); +#38466 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38467 = VECTOR('',#38468,1.); +#38468 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38469 = ORIENTED_EDGE('',*,*,#38470,.F.); +#38470 = EDGE_CURVE('',#38292,#38463,#38471,.T.); +#38471 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38472,#38473),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38472 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38473 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38474 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38475,#38476) + ,(#38477,#38478 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38475 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38476 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38477 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38478 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38479 = ADVANCED_FACE('',(#38480),#38561,.F.); +#38480 = FACE_BOUND('',#38481,.F.); +#38481 = EDGE_LOOP('',(#38482,#38483,#38490,#38498,#38506,#38514,#38522, + #38530,#38538,#38546,#38554,#38560)); +#38482 = ORIENTED_EDGE('',*,*,#38267,.T.); +#38483 = ORIENTED_EDGE('',*,*,#38484,.T.); +#38484 = EDGE_CURVE('',#38268,#38485,#38487,.T.); +#38485 = VERTEX_POINT('',#38486); +#38486 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38487 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38488,#38489),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38488 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38489 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38490 = ORIENTED_EDGE('',*,*,#38491,.F.); +#38491 = EDGE_CURVE('',#38492,#38485,#38494,.T.); +#38492 = VERTEX_POINT('',#38493); +#38493 = CARTESIAN_POINT('',(1.95,-2.11,0.825)); +#38494 = LINE('',#38495,#38496); +#38495 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38496 = VECTOR('',#38497,1.); +#38497 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38498 = ORIENTED_EDGE('',*,*,#38499,.F.); +#38499 = EDGE_CURVE('',#38500,#38492,#38502,.T.); +#38500 = VERTEX_POINT('',#38501); +#38501 = CARTESIAN_POINT('',(1.95,-1.7,0.825)); +#38502 = LINE('',#38503,#38504); +#38503 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38504 = VECTOR('',#38505,1.); +#38505 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38506 = ORIENTED_EDGE('',*,*,#38507,.F.); +#38507 = EDGE_CURVE('',#38508,#38500,#38510,.T.); +#38508 = VERTEX_POINT('',#38509); +#38509 = CARTESIAN_POINT('',(1.95,-0.84,0.825)); +#38510 = LINE('',#38511,#38512); +#38511 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38512 = VECTOR('',#38513,1.); +#38513 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38514 = ORIENTED_EDGE('',*,*,#38515,.F.); +#38515 = EDGE_CURVE('',#38516,#38508,#38518,.T.); +#38516 = VERTEX_POINT('',#38517); +#38517 = CARTESIAN_POINT('',(1.95,-0.43,0.825)); +#38518 = LINE('',#38519,#38520); +#38519 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38520 = VECTOR('',#38521,1.); +#38521 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38522 = ORIENTED_EDGE('',*,*,#38523,.F.); +#38523 = EDGE_CURVE('',#38524,#38516,#38526,.T.); +#38524 = VERTEX_POINT('',#38525); +#38525 = CARTESIAN_POINT('',(1.95,0.43,0.825)); +#38526 = LINE('',#38527,#38528); +#38527 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38528 = VECTOR('',#38529,1.); +#38529 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38530 = ORIENTED_EDGE('',*,*,#38531,.F.); +#38531 = EDGE_CURVE('',#38532,#38524,#38534,.T.); +#38532 = VERTEX_POINT('',#38533); +#38533 = CARTESIAN_POINT('',(1.95,0.84,0.825)); +#38534 = LINE('',#38535,#38536); +#38535 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38536 = VECTOR('',#38537,1.); +#38537 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38538 = ORIENTED_EDGE('',*,*,#38539,.F.); +#38539 = EDGE_CURVE('',#38540,#38532,#38542,.T.); +#38540 = VERTEX_POINT('',#38541); +#38541 = CARTESIAN_POINT('',(1.95,1.7,0.825)); +#38542 = LINE('',#38543,#38544); +#38543 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38544 = VECTOR('',#38545,1.); +#38545 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38546 = ORIENTED_EDGE('',*,*,#38547,.F.); +#38547 = EDGE_CURVE('',#38548,#38540,#38550,.T.); +#38548 = VERTEX_POINT('',#38549); +#38549 = CARTESIAN_POINT('',(1.95,2.11,0.825)); +#38550 = LINE('',#38551,#38552); +#38551 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38552 = VECTOR('',#38553,1.); +#38553 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38554 = ORIENTED_EDGE('',*,*,#38555,.F.); +#38555 = EDGE_CURVE('',#38323,#38548,#38556,.T.); +#38556 = LINE('',#38557,#38558); +#38557 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38558 = VECTOR('',#38559,1.); +#38559 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38560 = ORIENTED_EDGE('',*,*,#38322,.F.); +#38561 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38562,#38563) + ,(#38564,#38565 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38562 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38563 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38564 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38565 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38566 = ADVANCED_FACE('',(#38567),#38584,.F.); +#38567 = FACE_BOUND('',#38568,.F.); +#38568 = EDGE_LOOP('',(#38569,#38570,#38571,#38579)); +#38569 = ORIENTED_EDGE('',*,*,#38291,.T.); +#38570 = ORIENTED_EDGE('',*,*,#38470,.T.); +#38571 = ORIENTED_EDGE('',*,*,#38572,.F.); +#38572 = EDGE_CURVE('',#38573,#38463,#38575,.T.); +#38573 = VERTEX_POINT('',#38574); +#38574 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38575 = LINE('',#38576,#38577); +#38576 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38577 = VECTOR('',#38578,1.); +#38578 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#38579 = ORIENTED_EDGE('',*,*,#38580,.F.); +#38580 = EDGE_CURVE('',#38284,#38573,#38581,.T.); +#38581 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38582,#38583),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38582 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38583 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38584 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38585,#38586) + ,(#38587,#38588 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38585 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38586 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38587 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38588 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38589 = ADVANCED_FACE('',(#38590),#38607,.F.); +#38590 = FACE_BOUND('',#38591,.F.); +#38591 = EDGE_LOOP('',(#38592,#38593,#38600,#38606)); +#38592 = ORIENTED_EDGE('',*,*,#38275,.T.); +#38593 = ORIENTED_EDGE('',*,*,#38594,.T.); +#38594 = EDGE_CURVE('',#38276,#38595,#38597,.T.); +#38595 = VERTEX_POINT('',#38596); +#38596 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38597 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38598,#38599),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38598 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38599 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38600 = ORIENTED_EDGE('',*,*,#38601,.F.); +#38601 = EDGE_CURVE('',#38485,#38595,#38602,.T.); +#38602 = LINE('',#38603,#38604); +#38603 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38604 = VECTOR('',#38605,1.); +#38605 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#38606 = ORIENTED_EDGE('',*,*,#38484,.F.); +#38607 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38608,#38609) + ,(#38610,#38611 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38608 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38609 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38610 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38611 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38612 = ADVANCED_FACE('',(#38613),#38624,.F.); +#38613 = FACE_BOUND('',#38614,.F.); +#38614 = EDGE_LOOP('',(#38615,#38616,#38617,#38623)); +#38615 = ORIENTED_EDGE('',*,*,#38283,.T.); +#38616 = ORIENTED_EDGE('',*,*,#38580,.T.); +#38617 = ORIENTED_EDGE('',*,*,#38618,.F.); +#38618 = EDGE_CURVE('',#38595,#38573,#38619,.T.); +#38619 = LINE('',#38620,#38621); +#38620 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38621 = VECTOR('',#38622,1.); +#38622 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38623 = ORIENTED_EDGE('',*,*,#38594,.F.); +#38624 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38625,#38626) + ,(#38627,#38628 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38625 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38626 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38627 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38628 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38629 = ADVANCED_FACE('',(#38630),#38647,.F.); +#38630 = FACE_BOUND('',#38631,.F.); +#38631 = EDGE_LOOP('',(#38632,#38633,#38640,#38646)); +#38632 = ORIENTED_EDGE('',*,*,#38329,.T.); +#38633 = ORIENTED_EDGE('',*,*,#38634,.T.); +#38634 = EDGE_CURVE('',#38323,#38635,#38637,.T.); +#38635 = VERTEX_POINT('',#38636); +#38636 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#38637 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38638,#38639),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38638 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38639 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#38640 = ORIENTED_EDGE('',*,*,#38641,.F.); +#38641 = EDGE_CURVE('',#38346,#38635,#38642,.T.); +#38642 = LINE('',#38643,#38644); +#38643 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38644 = VECTOR('',#38645,1.); +#38645 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38646 = ORIENTED_EDGE('',*,*,#38345,.F.); +#38647 = PLANE('',#38648); +#38648 = AXIS2_PLACEMENT_3D('',#38649,#38650,#38651); +#38649 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38650 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#38651 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38652 = ADVANCED_FACE('',(#38653),#38735,.F.); +#38653 = FACE_BOUND('',#38654,.F.); +#38654 = EDGE_LOOP('',(#38655,#38663,#38664,#38665,#38673,#38681,#38689, + #38697,#38705,#38713,#38721,#38729)); +#38655 = ORIENTED_EDGE('',*,*,#38656,.T.); +#38656 = EDGE_CURVE('',#38657,#38353,#38659,.T.); +#38657 = VERTEX_POINT('',#38658); +#38658 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38659 = LINE('',#38660,#38661); +#38660 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38661 = VECTOR('',#38662,1.); +#38662 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38663 = ORIENTED_EDGE('',*,*,#38352,.T.); +#38664 = ORIENTED_EDGE('',*,*,#38641,.T.); +#38665 = ORIENTED_EDGE('',*,*,#38666,.T.); +#38666 = EDGE_CURVE('',#38635,#38667,#38669,.T.); +#38667 = VERTEX_POINT('',#38668); +#38668 = CARTESIAN_POINT('',(1.95,2.11,1.025)); +#38669 = LINE('',#38670,#38671); +#38670 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#38671 = VECTOR('',#38672,1.); +#38672 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38673 = ORIENTED_EDGE('',*,*,#38674,.T.); +#38674 = EDGE_CURVE('',#38667,#38675,#38677,.T.); +#38675 = VERTEX_POINT('',#38676); +#38676 = CARTESIAN_POINT('',(1.875,2.11,1.025)); +#38677 = LINE('',#38678,#38679); +#38678 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#38679 = VECTOR('',#38680,1.); +#38680 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38681 = ORIENTED_EDGE('',*,*,#38682,.F.); +#38682 = EDGE_CURVE('',#38683,#38675,#38685,.T.); +#38683 = VERTEX_POINT('',#38684); +#38684 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#38685 = LINE('',#38686,#38687); +#38686 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#38687 = VECTOR('',#38688,1.); +#38688 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38689 = ORIENTED_EDGE('',*,*,#38690,.F.); +#38690 = EDGE_CURVE('',#38691,#38683,#38693,.T.); +#38691 = VERTEX_POINT('',#38692); +#38692 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#38693 = LINE('',#38694,#38695); +#38694 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#38695 = VECTOR('',#38696,1.); +#38696 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38697 = ORIENTED_EDGE('',*,*,#38698,.F.); +#38698 = EDGE_CURVE('',#38699,#38691,#38701,.T.); +#38699 = VERTEX_POINT('',#38700); +#38700 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#38701 = LINE('',#38702,#38703); +#38702 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#38703 = VECTOR('',#38704,1.); +#38704 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38705 = ORIENTED_EDGE('',*,*,#38706,.F.); +#38706 = EDGE_CURVE('',#38707,#38699,#38709,.T.); +#38707 = VERTEX_POINT('',#38708); +#38708 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#38709 = LINE('',#38710,#38711); +#38710 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#38711 = VECTOR('',#38712,1.); +#38712 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38713 = ORIENTED_EDGE('',*,*,#38714,.F.); +#38714 = EDGE_CURVE('',#38715,#38707,#38717,.T.); +#38715 = VERTEX_POINT('',#38716); +#38716 = CARTESIAN_POINT('',(-1.875,2.11,1.025)); +#38717 = LINE('',#38718,#38719); +#38718 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#38719 = VECTOR('',#38720,1.); +#38720 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38721 = ORIENTED_EDGE('',*,*,#38722,.F.); +#38722 = EDGE_CURVE('',#38723,#38715,#38725,.T.); +#38723 = VERTEX_POINT('',#38724); +#38724 = CARTESIAN_POINT('',(-1.95,2.11,1.025)); +#38725 = LINE('',#38726,#38727); +#38726 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#38727 = VECTOR('',#38728,1.); +#38728 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#38729 = ORIENTED_EDGE('',*,*,#38730,.T.); +#38730 = EDGE_CURVE('',#38723,#38657,#38731,.T.); +#38731 = LINE('',#38732,#38733); +#38732 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38733 = VECTOR('',#38734,1.); +#38734 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38735 = PLANE('',#38736); +#38736 = AXIS2_PLACEMENT_3D('',#38737,#38738,#38739); +#38737 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#38738 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#38739 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#38740 = ADVANCED_FACE('',(#38741),#38751,.F.); +#38741 = FACE_BOUND('',#38742,.F.); +#38742 = EDGE_LOOP('',(#38743,#38744,#38745,#38746)); +#38743 = ORIENTED_EDGE('',*,*,#38375,.T.); +#38744 = ORIENTED_EDGE('',*,*,#38360,.T.); +#38745 = ORIENTED_EDGE('',*,*,#38656,.F.); +#38746 = ORIENTED_EDGE('',*,*,#38747,.F.); +#38747 = EDGE_CURVE('',#38376,#38657,#38748,.T.); +#38748 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38749,#38750),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38749 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38750 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38751 = PLANE('',#38752); +#38752 = AXIS2_PLACEMENT_3D('',#38753,#38754,#38755); +#38753 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38754 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38755 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38756 = ADVANCED_FACE('',(#38757),#38781,.F.); +#38757 = FACE_BOUND('',#38758,.F.); +#38758 = EDGE_LOOP('',(#38759,#38766,#38767,#38775)); +#38759 = ORIENTED_EDGE('',*,*,#38760,.F.); +#38760 = EDGE_CURVE('',#38463,#38761,#38763,.T.); +#38761 = VERTEX_POINT('',#38762); +#38762 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38763 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38764,#38765),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38764 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38765 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38766 = ORIENTED_EDGE('',*,*,#38462,.T.); +#38767 = ORIENTED_EDGE('',*,*,#38768,.T.); +#38768 = EDGE_CURVE('',#38455,#38769,#38771,.T.); +#38769 = VERTEX_POINT('',#38770); +#38770 = CARTESIAN_POINT('',(-1.95,-2.11,1.025)); +#38771 = LINE('',#38772,#38773); +#38772 = CARTESIAN_POINT('',(-1.95,-2.11,0.786976568901)); +#38773 = VECTOR('',#38774,1.); +#38774 = DIRECTION('',(0.,0.,1.)); +#38775 = ORIENTED_EDGE('',*,*,#38776,.F.); +#38776 = EDGE_CURVE('',#38761,#38769,#38777,.T.); +#38777 = LINE('',#38778,#38779); +#38778 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38779 = VECTOR('',#38780,1.); +#38780 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38781 = PLANE('',#38782); +#38782 = AXIS2_PLACEMENT_3D('',#38783,#38784,#38785); +#38783 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38784 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38785 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38786 = ADVANCED_FACE('',(#38787),#38812,.F.); +#38787 = FACE_BOUND('',#38788,.F.); +#38788 = EDGE_LOOP('',(#38789,#38797,#38798,#38806)); +#38789 = ORIENTED_EDGE('',*,*,#38790,.F.); +#38790 = EDGE_CURVE('',#38455,#38791,#38793,.T.); +#38791 = VERTEX_POINT('',#38792); +#38792 = CARTESIAN_POINT('',(-2.25,-2.11,0.825)); +#38793 = LINE('',#38794,#38795); +#38794 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#38795 = VECTOR('',#38796,1.); +#38796 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38797 = ORIENTED_EDGE('',*,*,#38454,.T.); +#38798 = ORIENTED_EDGE('',*,*,#38799,.T.); +#38799 = EDGE_CURVE('',#38447,#38800,#38802,.T.); +#38800 = VERTEX_POINT('',#38801); +#38801 = CARTESIAN_POINT('',(-2.25,-1.7,0.825)); +#38802 = LINE('',#38803,#38804); +#38803 = CARTESIAN_POINT('',(-1.8,-1.7,0.825)); +#38804 = VECTOR('',#38805,1.); +#38805 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38806 = ORIENTED_EDGE('',*,*,#38807,.F.); +#38807 = EDGE_CURVE('',#38791,#38800,#38808,.T.); +#38808 = LINE('',#38809,#38810); +#38809 = CARTESIAN_POINT('',(-2.25,-2.11,0.825)); +#38810 = VECTOR('',#38811,1.); +#38811 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38812 = PLANE('',#38813); +#38813 = AXIS2_PLACEMENT_3D('',#38814,#38815,#38816); +#38814 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#38815 = DIRECTION('',(0.,0.,1.)); +#38816 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38817 = ADVANCED_FACE('',(#38818),#38843,.F.); +#38818 = FACE_BOUND('',#38819,.F.); +#38819 = EDGE_LOOP('',(#38820,#38828,#38829,#38837)); +#38820 = ORIENTED_EDGE('',*,*,#38821,.F.); +#38821 = EDGE_CURVE('',#38447,#38822,#38824,.T.); +#38822 = VERTEX_POINT('',#38823); +#38823 = CARTESIAN_POINT('',(-1.95,-1.7,1.025)); +#38824 = LINE('',#38825,#38826); +#38825 = CARTESIAN_POINT('',(-1.95,-1.7,0.786976568901)); +#38826 = VECTOR('',#38827,1.); +#38827 = DIRECTION('',(0.,0.,1.)); +#38828 = ORIENTED_EDGE('',*,*,#38446,.T.); +#38829 = ORIENTED_EDGE('',*,*,#38830,.T.); +#38830 = EDGE_CURVE('',#38439,#38831,#38833,.T.); +#38831 = VERTEX_POINT('',#38832); +#38832 = CARTESIAN_POINT('',(-1.95,-0.84,1.025)); +#38833 = LINE('',#38834,#38835); +#38834 = CARTESIAN_POINT('',(-1.95,-0.84,0.786976568901)); +#38835 = VECTOR('',#38836,1.); +#38836 = DIRECTION('',(0.,0.,1.)); +#38837 = ORIENTED_EDGE('',*,*,#38838,.F.); +#38838 = EDGE_CURVE('',#38822,#38831,#38839,.T.); +#38839 = LINE('',#38840,#38841); +#38840 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38841 = VECTOR('',#38842,1.); +#38842 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38843 = PLANE('',#38844); +#38844 = AXIS2_PLACEMENT_3D('',#38845,#38846,#38847); +#38845 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38846 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38847 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38848 = ADVANCED_FACE('',(#38849),#38874,.F.); +#38849 = FACE_BOUND('',#38850,.F.); +#38850 = EDGE_LOOP('',(#38851,#38859,#38860,#38868)); +#38851 = ORIENTED_EDGE('',*,*,#38852,.F.); +#38852 = EDGE_CURVE('',#38439,#38853,#38855,.T.); +#38853 = VERTEX_POINT('',#38854); +#38854 = CARTESIAN_POINT('',(-2.25,-0.84,0.825)); +#38855 = LINE('',#38856,#38857); +#38856 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#38857 = VECTOR('',#38858,1.); +#38858 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38859 = ORIENTED_EDGE('',*,*,#38438,.T.); +#38860 = ORIENTED_EDGE('',*,*,#38861,.T.); +#38861 = EDGE_CURVE('',#38431,#38862,#38864,.T.); +#38862 = VERTEX_POINT('',#38863); +#38863 = CARTESIAN_POINT('',(-2.25,-0.43,0.825)); +#38864 = LINE('',#38865,#38866); +#38865 = CARTESIAN_POINT('',(-1.8,-0.43,0.825)); +#38866 = VECTOR('',#38867,1.); +#38867 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38868 = ORIENTED_EDGE('',*,*,#38869,.F.); +#38869 = EDGE_CURVE('',#38853,#38862,#38870,.T.); +#38870 = LINE('',#38871,#38872); +#38871 = CARTESIAN_POINT('',(-2.25,-0.84,0.825)); +#38872 = VECTOR('',#38873,1.); +#38873 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38874 = PLANE('',#38875); +#38875 = AXIS2_PLACEMENT_3D('',#38876,#38877,#38878); +#38876 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#38877 = DIRECTION('',(0.,0.,1.)); +#38878 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38879 = ADVANCED_FACE('',(#38880),#38905,.F.); +#38880 = FACE_BOUND('',#38881,.F.); +#38881 = EDGE_LOOP('',(#38882,#38890,#38891,#38899)); +#38882 = ORIENTED_EDGE('',*,*,#38883,.F.); +#38883 = EDGE_CURVE('',#38431,#38884,#38886,.T.); +#38884 = VERTEX_POINT('',#38885); +#38885 = CARTESIAN_POINT('',(-1.95,-0.43,1.025)); +#38886 = LINE('',#38887,#38888); +#38887 = CARTESIAN_POINT('',(-1.95,-0.43,0.786976568901)); +#38888 = VECTOR('',#38889,1.); +#38889 = DIRECTION('',(0.,0.,1.)); +#38890 = ORIENTED_EDGE('',*,*,#38430,.T.); +#38891 = ORIENTED_EDGE('',*,*,#38892,.T.); +#38892 = EDGE_CURVE('',#38423,#38893,#38895,.T.); +#38893 = VERTEX_POINT('',#38894); +#38894 = CARTESIAN_POINT('',(-1.95,0.43,1.025)); +#38895 = LINE('',#38896,#38897); +#38896 = CARTESIAN_POINT('',(-1.95,0.43,0.786976568901)); +#38897 = VECTOR('',#38898,1.); +#38898 = DIRECTION('',(0.,0.,1.)); +#38899 = ORIENTED_EDGE('',*,*,#38900,.F.); +#38900 = EDGE_CURVE('',#38884,#38893,#38901,.T.); +#38901 = LINE('',#38902,#38903); +#38902 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38903 = VECTOR('',#38904,1.); +#38904 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38905 = PLANE('',#38906); +#38906 = AXIS2_PLACEMENT_3D('',#38907,#38908,#38909); +#38907 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38908 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38909 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38910 = ADVANCED_FACE('',(#38911),#38936,.F.); +#38911 = FACE_BOUND('',#38912,.F.); +#38912 = EDGE_LOOP('',(#38913,#38921,#38922,#38930)); +#38913 = ORIENTED_EDGE('',*,*,#38914,.F.); +#38914 = EDGE_CURVE('',#38423,#38915,#38917,.T.); +#38915 = VERTEX_POINT('',#38916); +#38916 = CARTESIAN_POINT('',(-2.25,0.43,0.825)); +#38917 = LINE('',#38918,#38919); +#38918 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#38919 = VECTOR('',#38920,1.); +#38920 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38921 = ORIENTED_EDGE('',*,*,#38422,.T.); +#38922 = ORIENTED_EDGE('',*,*,#38923,.T.); +#38923 = EDGE_CURVE('',#38415,#38924,#38926,.T.); +#38924 = VERTEX_POINT('',#38925); +#38925 = CARTESIAN_POINT('',(-2.25,0.84,0.825)); +#38926 = LINE('',#38927,#38928); +#38927 = CARTESIAN_POINT('',(-1.8,0.84,0.825)); +#38928 = VECTOR('',#38929,1.); +#38929 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38930 = ORIENTED_EDGE('',*,*,#38931,.F.); +#38931 = EDGE_CURVE('',#38915,#38924,#38932,.T.); +#38932 = LINE('',#38933,#38934); +#38933 = CARTESIAN_POINT('',(-2.25,0.43,0.825)); +#38934 = VECTOR('',#38935,1.); +#38935 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38936 = PLANE('',#38937); +#38937 = AXIS2_PLACEMENT_3D('',#38938,#38939,#38940); +#38938 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#38939 = DIRECTION('',(0.,0.,1.)); +#38940 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38941 = ADVANCED_FACE('',(#38942),#38967,.F.); +#38942 = FACE_BOUND('',#38943,.F.); +#38943 = EDGE_LOOP('',(#38944,#38952,#38953,#38961)); +#38944 = ORIENTED_EDGE('',*,*,#38945,.F.); +#38945 = EDGE_CURVE('',#38415,#38946,#38948,.T.); +#38946 = VERTEX_POINT('',#38947); +#38947 = CARTESIAN_POINT('',(-1.95,0.84,1.025)); +#38948 = LINE('',#38949,#38950); +#38949 = CARTESIAN_POINT('',(-1.95,0.84,0.786976568901)); +#38950 = VECTOR('',#38951,1.); +#38951 = DIRECTION('',(0.,0.,1.)); +#38952 = ORIENTED_EDGE('',*,*,#38414,.T.); +#38953 = ORIENTED_EDGE('',*,*,#38954,.T.); +#38954 = EDGE_CURVE('',#38407,#38955,#38957,.T.); +#38955 = VERTEX_POINT('',#38956); +#38956 = CARTESIAN_POINT('',(-1.95,1.7,1.025)); +#38957 = LINE('',#38958,#38959); +#38958 = CARTESIAN_POINT('',(-1.95,1.7,0.786976568901)); +#38959 = VECTOR('',#38960,1.); +#38960 = DIRECTION('',(0.,0.,1.)); +#38961 = ORIENTED_EDGE('',*,*,#38962,.F.); +#38962 = EDGE_CURVE('',#38946,#38955,#38963,.T.); +#38963 = LINE('',#38964,#38965); +#38964 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38965 = VECTOR('',#38966,1.); +#38966 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38967 = PLANE('',#38968); +#38968 = AXIS2_PLACEMENT_3D('',#38969,#38970,#38971); +#38969 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38970 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38971 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38972 = ADVANCED_FACE('',(#38973),#38998,.F.); +#38973 = FACE_BOUND('',#38974,.F.); +#38974 = EDGE_LOOP('',(#38975,#38983,#38984,#38992)); +#38975 = ORIENTED_EDGE('',*,*,#38976,.F.); +#38976 = EDGE_CURVE('',#38407,#38977,#38979,.T.); +#38977 = VERTEX_POINT('',#38978); +#38978 = CARTESIAN_POINT('',(-2.25,1.7,0.825)); +#38979 = LINE('',#38980,#38981); +#38980 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#38981 = VECTOR('',#38982,1.); +#38982 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38983 = ORIENTED_EDGE('',*,*,#38406,.T.); +#38984 = ORIENTED_EDGE('',*,*,#38985,.T.); +#38985 = EDGE_CURVE('',#38399,#38986,#38988,.T.); +#38986 = VERTEX_POINT('',#38987); +#38987 = CARTESIAN_POINT('',(-2.25,2.11,0.825)); +#38988 = LINE('',#38989,#38990); +#38989 = CARTESIAN_POINT('',(-1.8,2.11,0.825)); +#38990 = VECTOR('',#38991,1.); +#38991 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38992 = ORIENTED_EDGE('',*,*,#38993,.F.); +#38993 = EDGE_CURVE('',#38977,#38986,#38994,.T.); +#38994 = LINE('',#38995,#38996); +#38995 = CARTESIAN_POINT('',(-2.25,1.7,0.825)); +#38996 = VECTOR('',#38997,1.); +#38997 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38998 = PLANE('',#38999); +#38999 = AXIS2_PLACEMENT_3D('',#39000,#39001,#39002); +#39000 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#39001 = DIRECTION('',(0.,0.,1.)); +#39002 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39003 = ADVANCED_FACE('',(#39004),#39015,.F.); +#39004 = FACE_BOUND('',#39005,.F.); +#39005 = EDGE_LOOP('',(#39006,#39012,#39013,#39014)); +#39006 = ORIENTED_EDGE('',*,*,#39007,.F.); +#39007 = EDGE_CURVE('',#38399,#38723,#39008,.T.); +#39008 = LINE('',#39009,#39010); +#39009 = CARTESIAN_POINT('',(-1.95,2.11,0.786976568901)); +#39010 = VECTOR('',#39011,1.); +#39011 = DIRECTION('',(0.,0.,1.)); +#39012 = ORIENTED_EDGE('',*,*,#38398,.T.); +#39013 = ORIENTED_EDGE('',*,*,#38747,.T.); +#39014 = ORIENTED_EDGE('',*,*,#38730,.F.); +#39015 = PLANE('',#39016); +#39016 = AXIS2_PLACEMENT_3D('',#39017,#39018,#39019); +#39017 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#39018 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39019 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39020 = ADVANCED_FACE('',(#39021),#39032,.F.); +#39021 = FACE_BOUND('',#39022,.F.); +#39022 = EDGE_LOOP('',(#39023,#39024,#39025,#39031)); +#39023 = ORIENTED_EDGE('',*,*,#38634,.F.); +#39024 = ORIENTED_EDGE('',*,*,#38555,.T.); +#39025 = ORIENTED_EDGE('',*,*,#39026,.T.); +#39026 = EDGE_CURVE('',#38548,#38667,#39027,.T.); +#39027 = LINE('',#39028,#39029); +#39028 = CARTESIAN_POINT('',(1.95,2.11,0.786976568901)); +#39029 = VECTOR('',#39030,1.); +#39030 = DIRECTION('',(0.,0.,1.)); +#39031 = ORIENTED_EDGE('',*,*,#38666,.F.); +#39032 = PLANE('',#39033); +#39033 = AXIS2_PLACEMENT_3D('',#39034,#39035,#39036); +#39034 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39035 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39036 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39037 = ADVANCED_FACE('',(#39038),#39063,.F.); +#39038 = FACE_BOUND('',#39039,.F.); +#39039 = EDGE_LOOP('',(#39040,#39048,#39049,#39057)); +#39040 = ORIENTED_EDGE('',*,*,#39041,.F.); +#39041 = EDGE_CURVE('',#38548,#39042,#39044,.T.); +#39042 = VERTEX_POINT('',#39043); +#39043 = CARTESIAN_POINT('',(2.25,2.11,0.825)); +#39044 = LINE('',#39045,#39046); +#39045 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#39046 = VECTOR('',#39047,1.); +#39047 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39048 = ORIENTED_EDGE('',*,*,#38547,.T.); +#39049 = ORIENTED_EDGE('',*,*,#39050,.T.); +#39050 = EDGE_CURVE('',#38540,#39051,#39053,.T.); +#39051 = VERTEX_POINT('',#39052); +#39052 = CARTESIAN_POINT('',(2.25,1.7,0.825)); +#39053 = LINE('',#39054,#39055); +#39054 = CARTESIAN_POINT('',(1.8,1.7,0.825)); +#39055 = VECTOR('',#39056,1.); +#39056 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39057 = ORIENTED_EDGE('',*,*,#39058,.F.); +#39058 = EDGE_CURVE('',#39042,#39051,#39059,.T.); +#39059 = LINE('',#39060,#39061); +#39060 = CARTESIAN_POINT('',(2.25,2.11,0.825)); +#39061 = VECTOR('',#39062,1.); +#39062 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39063 = PLANE('',#39064); +#39064 = AXIS2_PLACEMENT_3D('',#39065,#39066,#39067); +#39065 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#39066 = DIRECTION('',(0.,0.,1.)); +#39067 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39068 = ADVANCED_FACE('',(#39069),#39094,.F.); +#39069 = FACE_BOUND('',#39070,.F.); +#39070 = EDGE_LOOP('',(#39071,#39079,#39080,#39088)); +#39071 = ORIENTED_EDGE('',*,*,#39072,.F.); +#39072 = EDGE_CURVE('',#38540,#39073,#39075,.T.); +#39073 = VERTEX_POINT('',#39074); +#39074 = CARTESIAN_POINT('',(1.95,1.7,1.025)); +#39075 = LINE('',#39076,#39077); +#39076 = CARTESIAN_POINT('',(1.95,1.7,0.786976568901)); +#39077 = VECTOR('',#39078,1.); +#39078 = DIRECTION('',(0.,0.,1.)); +#39079 = ORIENTED_EDGE('',*,*,#38539,.T.); +#39080 = ORIENTED_EDGE('',*,*,#39081,.T.); +#39081 = EDGE_CURVE('',#38532,#39082,#39084,.T.); +#39082 = VERTEX_POINT('',#39083); +#39083 = CARTESIAN_POINT('',(1.95,0.84,1.025)); +#39084 = LINE('',#39085,#39086); +#39085 = CARTESIAN_POINT('',(1.95,0.84,0.786976568901)); +#39086 = VECTOR('',#39087,1.); +#39087 = DIRECTION('',(0.,0.,1.)); +#39088 = ORIENTED_EDGE('',*,*,#39089,.F.); +#39089 = EDGE_CURVE('',#39073,#39082,#39090,.T.); +#39090 = LINE('',#39091,#39092); +#39091 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39092 = VECTOR('',#39093,1.); +#39093 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39094 = PLANE('',#39095); +#39095 = AXIS2_PLACEMENT_3D('',#39096,#39097,#39098); +#39096 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39097 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39098 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39099 = ADVANCED_FACE('',(#39100),#39125,.F.); +#39100 = FACE_BOUND('',#39101,.F.); +#39101 = EDGE_LOOP('',(#39102,#39110,#39111,#39119)); +#39102 = ORIENTED_EDGE('',*,*,#39103,.F.); +#39103 = EDGE_CURVE('',#38532,#39104,#39106,.T.); +#39104 = VERTEX_POINT('',#39105); +#39105 = CARTESIAN_POINT('',(2.25,0.84,0.825)); +#39106 = LINE('',#39107,#39108); +#39107 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#39108 = VECTOR('',#39109,1.); +#39109 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39110 = ORIENTED_EDGE('',*,*,#38531,.T.); +#39111 = ORIENTED_EDGE('',*,*,#39112,.T.); +#39112 = EDGE_CURVE('',#38524,#39113,#39115,.T.); +#39113 = VERTEX_POINT('',#39114); +#39114 = CARTESIAN_POINT('',(2.25,0.43,0.825)); +#39115 = LINE('',#39116,#39117); +#39116 = CARTESIAN_POINT('',(1.8,0.43,0.825)); +#39117 = VECTOR('',#39118,1.); +#39118 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39119 = ORIENTED_EDGE('',*,*,#39120,.F.); +#39120 = EDGE_CURVE('',#39104,#39113,#39121,.T.); +#39121 = LINE('',#39122,#39123); +#39122 = CARTESIAN_POINT('',(2.25,0.84,0.825)); +#39123 = VECTOR('',#39124,1.); +#39124 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39125 = PLANE('',#39126); +#39126 = AXIS2_PLACEMENT_3D('',#39127,#39128,#39129); +#39127 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#39128 = DIRECTION('',(0.,0.,1.)); +#39129 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39130 = ADVANCED_FACE('',(#39131),#39156,.F.); +#39131 = FACE_BOUND('',#39132,.F.); +#39132 = EDGE_LOOP('',(#39133,#39141,#39142,#39150)); +#39133 = ORIENTED_EDGE('',*,*,#39134,.F.); +#39134 = EDGE_CURVE('',#38524,#39135,#39137,.T.); +#39135 = VERTEX_POINT('',#39136); +#39136 = CARTESIAN_POINT('',(1.95,0.43,1.025)); +#39137 = LINE('',#39138,#39139); +#39138 = CARTESIAN_POINT('',(1.95,0.43,0.786976568901)); +#39139 = VECTOR('',#39140,1.); +#39140 = DIRECTION('',(0.,0.,1.)); +#39141 = ORIENTED_EDGE('',*,*,#38523,.T.); +#39142 = ORIENTED_EDGE('',*,*,#39143,.T.); +#39143 = EDGE_CURVE('',#38516,#39144,#39146,.T.); +#39144 = VERTEX_POINT('',#39145); +#39145 = CARTESIAN_POINT('',(1.95,-0.43,1.025)); +#39146 = LINE('',#39147,#39148); +#39147 = CARTESIAN_POINT('',(1.95,-0.43,0.786976568901)); +#39148 = VECTOR('',#39149,1.); +#39149 = DIRECTION('',(0.,0.,1.)); +#39150 = ORIENTED_EDGE('',*,*,#39151,.F.); +#39151 = EDGE_CURVE('',#39135,#39144,#39152,.T.); +#39152 = LINE('',#39153,#39154); +#39153 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39154 = VECTOR('',#39155,1.); +#39155 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39156 = PLANE('',#39157); +#39157 = AXIS2_PLACEMENT_3D('',#39158,#39159,#39160); +#39158 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39159 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39160 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39161 = ADVANCED_FACE('',(#39162),#39187,.F.); +#39162 = FACE_BOUND('',#39163,.F.); +#39163 = EDGE_LOOP('',(#39164,#39172,#39173,#39181)); +#39164 = ORIENTED_EDGE('',*,*,#39165,.F.); +#39165 = EDGE_CURVE('',#38516,#39166,#39168,.T.); +#39166 = VERTEX_POINT('',#39167); +#39167 = CARTESIAN_POINT('',(2.25,-0.43,0.825)); +#39168 = LINE('',#39169,#39170); +#39169 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#39170 = VECTOR('',#39171,1.); +#39171 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39172 = ORIENTED_EDGE('',*,*,#38515,.T.); +#39173 = ORIENTED_EDGE('',*,*,#39174,.T.); +#39174 = EDGE_CURVE('',#38508,#39175,#39177,.T.); +#39175 = VERTEX_POINT('',#39176); +#39176 = CARTESIAN_POINT('',(2.25,-0.84,0.825)); +#39177 = LINE('',#39178,#39179); +#39178 = CARTESIAN_POINT('',(1.8,-0.84,0.825)); +#39179 = VECTOR('',#39180,1.); +#39180 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39181 = ORIENTED_EDGE('',*,*,#39182,.F.); +#39182 = EDGE_CURVE('',#39166,#39175,#39183,.T.); +#39183 = LINE('',#39184,#39185); +#39184 = CARTESIAN_POINT('',(2.25,-0.43,0.825)); +#39185 = VECTOR('',#39186,1.); +#39186 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39187 = PLANE('',#39188); +#39188 = AXIS2_PLACEMENT_3D('',#39189,#39190,#39191); +#39189 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#39190 = DIRECTION('',(0.,0.,1.)); +#39191 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39192 = ADVANCED_FACE('',(#39193),#39218,.F.); +#39193 = FACE_BOUND('',#39194,.F.); +#39194 = EDGE_LOOP('',(#39195,#39203,#39204,#39212)); +#39195 = ORIENTED_EDGE('',*,*,#39196,.F.); +#39196 = EDGE_CURVE('',#38508,#39197,#39199,.T.); +#39197 = VERTEX_POINT('',#39198); +#39198 = CARTESIAN_POINT('',(1.95,-0.84,1.025)); +#39199 = LINE('',#39200,#39201); +#39200 = CARTESIAN_POINT('',(1.95,-0.84,0.786976568901)); +#39201 = VECTOR('',#39202,1.); +#39202 = DIRECTION('',(0.,0.,1.)); +#39203 = ORIENTED_EDGE('',*,*,#38507,.T.); +#39204 = ORIENTED_EDGE('',*,*,#39205,.T.); +#39205 = EDGE_CURVE('',#38500,#39206,#39208,.T.); +#39206 = VERTEX_POINT('',#39207); +#39207 = CARTESIAN_POINT('',(1.95,-1.7,1.025)); +#39208 = LINE('',#39209,#39210); +#39209 = CARTESIAN_POINT('',(1.95,-1.7,0.786976568901)); +#39210 = VECTOR('',#39211,1.); +#39211 = DIRECTION('',(0.,0.,1.)); +#39212 = ORIENTED_EDGE('',*,*,#39213,.F.); +#39213 = EDGE_CURVE('',#39197,#39206,#39214,.T.); +#39214 = LINE('',#39215,#39216); +#39215 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39216 = VECTOR('',#39217,1.); +#39217 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39218 = PLANE('',#39219); +#39219 = AXIS2_PLACEMENT_3D('',#39220,#39221,#39222); +#39220 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39221 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39222 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39223 = ADVANCED_FACE('',(#39224),#39249,.F.); +#39224 = FACE_BOUND('',#39225,.F.); +#39225 = EDGE_LOOP('',(#39226,#39234,#39235,#39243)); +#39226 = ORIENTED_EDGE('',*,*,#39227,.F.); +#39227 = EDGE_CURVE('',#38500,#39228,#39230,.T.); +#39228 = VERTEX_POINT('',#39229); +#39229 = CARTESIAN_POINT('',(2.25,-1.7,0.825)); +#39230 = LINE('',#39231,#39232); +#39231 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#39232 = VECTOR('',#39233,1.); +#39233 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39234 = ORIENTED_EDGE('',*,*,#38499,.T.); +#39235 = ORIENTED_EDGE('',*,*,#39236,.T.); +#39236 = EDGE_CURVE('',#38492,#39237,#39239,.T.); +#39237 = VERTEX_POINT('',#39238); +#39238 = CARTESIAN_POINT('',(2.25,-2.11,0.825)); +#39239 = LINE('',#39240,#39241); +#39240 = CARTESIAN_POINT('',(1.8,-2.11,0.825)); +#39241 = VECTOR('',#39242,1.); +#39242 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39243 = ORIENTED_EDGE('',*,*,#39244,.F.); +#39244 = EDGE_CURVE('',#39228,#39237,#39245,.T.); +#39245 = LINE('',#39246,#39247); +#39246 = CARTESIAN_POINT('',(2.25,-1.7,0.825)); +#39247 = VECTOR('',#39248,1.); +#39248 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39249 = PLANE('',#39250); +#39250 = AXIS2_PLACEMENT_3D('',#39251,#39252,#39253); +#39251 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#39252 = DIRECTION('',(0.,0.,1.)); +#39253 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39254 = ADVANCED_FACE('',(#39255),#39279,.F.); +#39255 = FACE_BOUND('',#39256,.F.); +#39256 = EDGE_LOOP('',(#39257,#39265,#39266,#39273)); +#39257 = ORIENTED_EDGE('',*,*,#39258,.F.); +#39258 = EDGE_CURVE('',#38492,#39259,#39261,.T.); +#39259 = VERTEX_POINT('',#39260); +#39260 = CARTESIAN_POINT('',(1.95,-2.11,1.025)); +#39261 = LINE('',#39262,#39263); +#39262 = CARTESIAN_POINT('',(1.95,-2.11,0.786976568901)); +#39263 = VECTOR('',#39264,1.); +#39264 = DIRECTION('',(0.,0.,1.)); +#39265 = ORIENTED_EDGE('',*,*,#38491,.T.); +#39266 = ORIENTED_EDGE('',*,*,#39267,.T.); +#39267 = EDGE_CURVE('',#38485,#39268,#39270,.T.); +#39268 = VERTEX_POINT('',#39269); +#39269 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39270 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39271,#39272),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39271 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#39272 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39273 = ORIENTED_EDGE('',*,*,#39274,.F.); +#39274 = EDGE_CURVE('',#39259,#39268,#39275,.T.); +#39275 = LINE('',#39276,#39277); +#39276 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39277 = VECTOR('',#39278,1.); +#39278 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39279 = PLANE('',#39280); +#39280 = AXIS2_PLACEMENT_3D('',#39281,#39282,#39283); +#39281 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39282 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39283 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39284 = ADVANCED_FACE('',(#39285),#39302,.F.); +#39285 = FACE_BOUND('',#39286,.F.); +#39286 = EDGE_LOOP('',(#39287,#39288,#39289,#39297)); +#39287 = ORIENTED_EDGE('',*,*,#38572,.T.); +#39288 = ORIENTED_EDGE('',*,*,#38760,.T.); +#39289 = ORIENTED_EDGE('',*,*,#39290,.F.); +#39290 = EDGE_CURVE('',#39291,#38761,#39293,.T.); +#39291 = VERTEX_POINT('',#39292); +#39292 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39293 = LINE('',#39294,#39295); +#39294 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39295 = VECTOR('',#39296,1.); +#39296 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39297 = ORIENTED_EDGE('',*,*,#39298,.F.); +#39298 = EDGE_CURVE('',#38573,#39291,#39299,.T.); +#39299 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39300,#39301),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39300 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#39301 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39302 = PLANE('',#39303); +#39303 = AXIS2_PLACEMENT_3D('',#39304,#39305,#39306); +#39304 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39305 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#39306 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39307 = ADVANCED_FACE('',(#39308),#39325,.F.); +#39308 = FACE_BOUND('',#39309,.F.); +#39309 = EDGE_LOOP('',(#39310,#39311,#39318,#39324)); +#39310 = ORIENTED_EDGE('',*,*,#38601,.T.); +#39311 = ORIENTED_EDGE('',*,*,#39312,.T.); +#39312 = EDGE_CURVE('',#38595,#39313,#39315,.T.); +#39313 = VERTEX_POINT('',#39314); +#39314 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39315 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39316,#39317),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39316 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#39317 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39318 = ORIENTED_EDGE('',*,*,#39319,.F.); +#39319 = EDGE_CURVE('',#39268,#39313,#39320,.T.); +#39320 = LINE('',#39321,#39322); +#39321 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39322 = VECTOR('',#39323,1.); +#39323 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#39324 = ORIENTED_EDGE('',*,*,#39267,.F.); +#39325 = PLANE('',#39326); +#39326 = AXIS2_PLACEMENT_3D('',#39327,#39328,#39329); +#39327 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39328 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39329 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#39330 = ADVANCED_FACE('',(#39331),#39342,.F.); +#39331 = FACE_BOUND('',#39332,.F.); +#39332 = EDGE_LOOP('',(#39333,#39334,#39335,#39341)); +#39333 = ORIENTED_EDGE('',*,*,#38618,.T.); +#39334 = ORIENTED_EDGE('',*,*,#39298,.T.); +#39335 = ORIENTED_EDGE('',*,*,#39336,.F.); +#39336 = EDGE_CURVE('',#39313,#39291,#39337,.T.); +#39337 = LINE('',#39338,#39339); +#39338 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39339 = VECTOR('',#39340,1.); +#39340 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39341 = ORIENTED_EDGE('',*,*,#39312,.F.); +#39342 = PLANE('',#39343); +#39343 = AXIS2_PLACEMENT_3D('',#39344,#39345,#39346); +#39344 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39345 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39346 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39347 = ADVANCED_FACE('',(#39348),#39387,.F.); +#39348 = FACE_BOUND('',#39349,.F.); +#39349 = EDGE_LOOP('',(#39350,#39358,#39366,#39372,#39373,#39381)); +#39350 = ORIENTED_EDGE('',*,*,#39351,.F.); +#39351 = EDGE_CURVE('',#39352,#38955,#39354,.T.); +#39352 = VERTEX_POINT('',#39353); +#39353 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39354 = LINE('',#39355,#39356); +#39355 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39356 = VECTOR('',#39357,1.); +#39357 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39358 = ORIENTED_EDGE('',*,*,#39359,.T.); +#39359 = EDGE_CURVE('',#39352,#39360,#39362,.T.); +#39360 = VERTEX_POINT('',#39361); +#39361 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#39362 = LINE('',#39363,#39364); +#39363 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39364 = VECTOR('',#39365,1.); +#39365 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39366 = ORIENTED_EDGE('',*,*,#39367,.T.); +#39367 = EDGE_CURVE('',#39360,#38723,#39368,.T.); +#39368 = LINE('',#39369,#39370); +#39369 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#39370 = VECTOR('',#39371,1.); +#39371 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39372 = ORIENTED_EDGE('',*,*,#38722,.T.); +#39373 = ORIENTED_EDGE('',*,*,#39374,.F.); +#39374 = EDGE_CURVE('',#39375,#38715,#39377,.T.); +#39375 = VERTEX_POINT('',#39376); +#39376 = CARTESIAN_POINT('',(-1.875,1.7,1.025)); +#39377 = LINE('',#39378,#39379); +#39378 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39379 = VECTOR('',#39380,1.); +#39380 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39381 = ORIENTED_EDGE('',*,*,#39382,.F.); +#39382 = EDGE_CURVE('',#38955,#39375,#39383,.T.); +#39383 = LINE('',#39384,#39385); +#39384 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39385 = VECTOR('',#39386,1.); +#39386 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39387 = PLANE('',#39388); +#39388 = AXIS2_PLACEMENT_3D('',#39389,#39390,#39391); +#39389 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39390 = DIRECTION('',(0.,0.,-1.)); +#39391 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39392 = ADVANCED_FACE('',(#39393),#39473,.F.); +#39393 = FACE_BOUND('',#39394,.F.); +#39394 = EDGE_LOOP('',(#39395,#39405,#39413,#39421,#39429,#39437,#39445, + #39451,#39452,#39453,#39460,#39468)); +#39395 = ORIENTED_EDGE('',*,*,#39396,.T.); +#39396 = EDGE_CURVE('',#39397,#39399,#39401,.T.); +#39397 = VERTEX_POINT('',#39398); +#39398 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39399 = VERTEX_POINT('',#39400); +#39400 = CARTESIAN_POINT('',(-1.875,-2.11,1.025)); +#39401 = LINE('',#39402,#39403); +#39402 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39403 = VECTOR('',#39404,1.); +#39404 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39405 = ORIENTED_EDGE('',*,*,#39406,.T.); +#39406 = EDGE_CURVE('',#39399,#39407,#39409,.T.); +#39407 = VERTEX_POINT('',#39408); +#39408 = CARTESIAN_POINT('',(-1.875,-1.7,1.025)); +#39409 = LINE('',#39410,#39411); +#39410 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39411 = VECTOR('',#39412,1.); +#39412 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39413 = ORIENTED_EDGE('',*,*,#39414,.T.); +#39414 = EDGE_CURVE('',#39407,#39415,#39417,.T.); +#39415 = VERTEX_POINT('',#39416); +#39416 = CARTESIAN_POINT('',(-1.875,-0.84,1.025)); +#39417 = LINE('',#39418,#39419); +#39418 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39419 = VECTOR('',#39420,1.); +#39420 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39421 = ORIENTED_EDGE('',*,*,#39422,.T.); +#39422 = EDGE_CURVE('',#39415,#39423,#39425,.T.); +#39423 = VERTEX_POINT('',#39424); +#39424 = CARTESIAN_POINT('',(-1.875,-0.43,1.025)); +#39425 = LINE('',#39426,#39427); +#39426 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39427 = VECTOR('',#39428,1.); +#39428 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39429 = ORIENTED_EDGE('',*,*,#39430,.T.); +#39430 = EDGE_CURVE('',#39423,#39431,#39433,.T.); +#39431 = VERTEX_POINT('',#39432); +#39432 = CARTESIAN_POINT('',(-1.875,0.43,1.025)); +#39433 = LINE('',#39434,#39435); +#39434 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39435 = VECTOR('',#39436,1.); +#39436 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39437 = ORIENTED_EDGE('',*,*,#39438,.T.); +#39438 = EDGE_CURVE('',#39431,#39439,#39441,.T.); +#39439 = VERTEX_POINT('',#39440); +#39440 = CARTESIAN_POINT('',(-1.875,0.84,1.025)); +#39441 = LINE('',#39442,#39443); +#39442 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39443 = VECTOR('',#39444,1.); +#39444 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39445 = ORIENTED_EDGE('',*,*,#39446,.T.); +#39446 = EDGE_CURVE('',#39439,#39375,#39447,.T.); +#39447 = LINE('',#39448,#39449); +#39448 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39449 = VECTOR('',#39450,1.); +#39450 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39451 = ORIENTED_EDGE('',*,*,#39374,.T.); +#39452 = ORIENTED_EDGE('',*,*,#38714,.T.); +#39453 = ORIENTED_EDGE('',*,*,#39454,.T.); +#39454 = EDGE_CURVE('',#38707,#39455,#39457,.T.); +#39455 = VERTEX_POINT('',#39456); +#39456 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39457 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39458,#39459),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39458 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#39459 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39460 = ORIENTED_EDGE('',*,*,#39461,.F.); +#39461 = EDGE_CURVE('',#39462,#39455,#39464,.T.); +#39462 = VERTEX_POINT('',#39463); +#39463 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39464 = LINE('',#39465,#39466); +#39465 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39466 = VECTOR('',#39467,1.); +#39467 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39468 = ORIENTED_EDGE('',*,*,#39469,.F.); +#39469 = EDGE_CURVE('',#39397,#39462,#39470,.T.); +#39470 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39471,#39472),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39471 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39472 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39473 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39474,#39475) + ,(#39476,#39477 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#39474 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39475 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39476 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#39477 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39478 = ADVANCED_FACE('',(#39479),#39496,.F.); +#39479 = FACE_BOUND('',#39480,.F.); +#39480 = EDGE_LOOP('',(#39481,#39482,#39489,#39495)); +#39481 = ORIENTED_EDGE('',*,*,#38706,.T.); +#39482 = ORIENTED_EDGE('',*,*,#39483,.T.); +#39483 = EDGE_CURVE('',#38699,#39484,#39486,.T.); +#39484 = VERTEX_POINT('',#39485); +#39485 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39486 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39487,#39488),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39487 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#39488 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39489 = ORIENTED_EDGE('',*,*,#39490,.F.); +#39490 = EDGE_CURVE('',#39455,#39484,#39491,.T.); +#39491 = LINE('',#39492,#39493); +#39492 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39493 = VECTOR('',#39494,1.); +#39494 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#39495 = ORIENTED_EDGE('',*,*,#39454,.F.); +#39496 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39497,#39498) + ,(#39499,#39500 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#39497 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#39498 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39499 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#39500 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39501 = ADVANCED_FACE('',(#39502),#39519,.F.); +#39502 = FACE_BOUND('',#39503,.F.); +#39503 = EDGE_LOOP('',(#39504,#39505,#39512,#39518)); +#39504 = ORIENTED_EDGE('',*,*,#38698,.T.); +#39505 = ORIENTED_EDGE('',*,*,#39506,.T.); +#39506 = EDGE_CURVE('',#38691,#39507,#39509,.T.); +#39507 = VERTEX_POINT('',#39508); +#39508 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39509 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39510,#39511),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39510 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#39511 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39512 = ORIENTED_EDGE('',*,*,#39513,.F.); +#39513 = EDGE_CURVE('',#39484,#39507,#39514,.T.); +#39514 = LINE('',#39515,#39516); +#39515 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39516 = VECTOR('',#39517,1.); +#39517 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39518 = ORIENTED_EDGE('',*,*,#39483,.F.); +#39519 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39520,#39521) + ,(#39522,#39523 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#39520 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#39521 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39522 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#39523 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39524 = ADVANCED_FACE('',(#39525),#39542,.F.); +#39525 = FACE_BOUND('',#39526,.F.); +#39526 = EDGE_LOOP('',(#39527,#39528,#39535,#39541)); +#39527 = ORIENTED_EDGE('',*,*,#38690,.T.); +#39528 = ORIENTED_EDGE('',*,*,#39529,.T.); +#39529 = EDGE_CURVE('',#38683,#39530,#39532,.T.); +#39530 = VERTEX_POINT('',#39531); +#39531 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39532 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39533,#39534),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39533 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39534 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39535 = ORIENTED_EDGE('',*,*,#39536,.F.); +#39536 = EDGE_CURVE('',#39507,#39530,#39537,.T.); +#39537 = LINE('',#39538,#39539); +#39538 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39539 = VECTOR('',#39540,1.); +#39540 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#39541 = ORIENTED_EDGE('',*,*,#39506,.F.); +#39542 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39543,#39544) + ,(#39545,#39546 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#39543 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#39544 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39545 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39546 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39547 = ADVANCED_FACE('',(#39548),#39629,.F.); +#39548 = FACE_BOUND('',#39549,.F.); +#39549 = EDGE_LOOP('',(#39550,#39551,#39559,#39567,#39575,#39583,#39591, + #39599,#39607,#39615,#39622,#39628)); +#39550 = ORIENTED_EDGE('',*,*,#38682,.T.); +#39551 = ORIENTED_EDGE('',*,*,#39552,.T.); +#39552 = EDGE_CURVE('',#38675,#39553,#39555,.T.); +#39553 = VERTEX_POINT('',#39554); +#39554 = CARTESIAN_POINT('',(1.875,1.7,1.025)); +#39555 = LINE('',#39556,#39557); +#39556 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39557 = VECTOR('',#39558,1.); +#39558 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39559 = ORIENTED_EDGE('',*,*,#39560,.T.); +#39560 = EDGE_CURVE('',#39553,#39561,#39563,.T.); +#39561 = VERTEX_POINT('',#39562); +#39562 = CARTESIAN_POINT('',(1.875,0.84,1.025)); +#39563 = LINE('',#39564,#39565); +#39564 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39565 = VECTOR('',#39566,1.); +#39566 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39567 = ORIENTED_EDGE('',*,*,#39568,.T.); +#39568 = EDGE_CURVE('',#39561,#39569,#39571,.T.); +#39569 = VERTEX_POINT('',#39570); +#39570 = CARTESIAN_POINT('',(1.875,0.43,1.025)); +#39571 = LINE('',#39572,#39573); +#39572 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39573 = VECTOR('',#39574,1.); +#39574 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39575 = ORIENTED_EDGE('',*,*,#39576,.T.); +#39576 = EDGE_CURVE('',#39569,#39577,#39579,.T.); +#39577 = VERTEX_POINT('',#39578); +#39578 = CARTESIAN_POINT('',(1.875,-0.43,1.025)); +#39579 = LINE('',#39580,#39581); +#39580 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39581 = VECTOR('',#39582,1.); +#39582 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39583 = ORIENTED_EDGE('',*,*,#39584,.T.); +#39584 = EDGE_CURVE('',#39577,#39585,#39587,.T.); +#39585 = VERTEX_POINT('',#39586); +#39586 = CARTESIAN_POINT('',(1.875,-0.84,1.025)); +#39587 = LINE('',#39588,#39589); +#39588 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39589 = VECTOR('',#39590,1.); +#39590 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39591 = ORIENTED_EDGE('',*,*,#39592,.T.); +#39592 = EDGE_CURVE('',#39585,#39593,#39595,.T.); +#39593 = VERTEX_POINT('',#39594); +#39594 = CARTESIAN_POINT('',(1.875,-1.7,1.025)); +#39595 = LINE('',#39596,#39597); +#39596 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39597 = VECTOR('',#39598,1.); +#39598 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39599 = ORIENTED_EDGE('',*,*,#39600,.T.); +#39600 = EDGE_CURVE('',#39593,#39601,#39603,.T.); +#39601 = VERTEX_POINT('',#39602); +#39602 = CARTESIAN_POINT('',(1.875,-2.11,1.025)); +#39603 = LINE('',#39604,#39605); +#39604 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39605 = VECTOR('',#39606,1.); +#39606 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39607 = ORIENTED_EDGE('',*,*,#39608,.T.); +#39608 = EDGE_CURVE('',#39601,#39609,#39611,.T.); +#39609 = VERTEX_POINT('',#39610); +#39610 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39611 = LINE('',#39612,#39613); +#39612 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39613 = VECTOR('',#39614,1.); +#39614 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39615 = ORIENTED_EDGE('',*,*,#39616,.T.); +#39616 = EDGE_CURVE('',#39609,#39617,#39619,.T.); +#39617 = VERTEX_POINT('',#39618); +#39618 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#39619 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39620,#39621),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39620 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39621 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#39622 = ORIENTED_EDGE('',*,*,#39623,.F.); +#39623 = EDGE_CURVE('',#39530,#39617,#39624,.T.); +#39624 = LINE('',#39625,#39626); +#39625 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39626 = VECTOR('',#39627,1.); +#39627 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39628 = ORIENTED_EDGE('',*,*,#39529,.F.); +#39629 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39630,#39631) + ,(#39632,#39633 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#39630 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39631 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39632 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39633 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#39634 = ADVANCED_FACE('',(#39635),#39667,.F.); +#39635 = FACE_BOUND('',#39636,.F.); +#39636 = EDGE_LOOP('',(#39637,#39645,#39653,#39659,#39665,#39666)); +#39637 = ORIENTED_EDGE('',*,*,#39638,.F.); +#39638 = EDGE_CURVE('',#39639,#38667,#39641,.T.); +#39639 = VERTEX_POINT('',#39640); +#39640 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39641 = LINE('',#39642,#39643); +#39642 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39643 = VECTOR('',#39644,1.); +#39644 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39645 = ORIENTED_EDGE('',*,*,#39646,.T.); +#39646 = EDGE_CURVE('',#39639,#39647,#39649,.T.); +#39647 = VERTEX_POINT('',#39648); +#39648 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#39649 = LINE('',#39650,#39651); +#39650 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39651 = VECTOR('',#39652,1.); +#39652 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39653 = ORIENTED_EDGE('',*,*,#39654,.T.); +#39654 = EDGE_CURVE('',#39647,#39073,#39655,.T.); +#39655 = LINE('',#39656,#39657); +#39656 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#39657 = VECTOR('',#39658,1.); +#39658 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39659 = ORIENTED_EDGE('',*,*,#39660,.T.); +#39660 = EDGE_CURVE('',#39073,#39553,#39661,.T.); +#39661 = LINE('',#39662,#39663); +#39662 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#39663 = VECTOR('',#39664,1.); +#39664 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39665 = ORIENTED_EDGE('',*,*,#39552,.F.); +#39666 = ORIENTED_EDGE('',*,*,#38674,.F.); +#39667 = PLANE('',#39668); +#39668 = AXIS2_PLACEMENT_3D('',#39669,#39670,#39671); +#39669 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39670 = DIRECTION('',(0.,0.,-1.)); +#39671 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#39672 = ADVANCED_FACE('',(#39673),#39716,.F.); +#39673 = FACE_BOUND('',#39674,.F.); +#39674 = EDGE_LOOP('',(#39675,#39676,#39682,#39683,#39691,#39699,#39705, + #39706,#39712,#39713,#39714,#39715)); +#39675 = ORIENTED_EDGE('',*,*,#38776,.T.); +#39676 = ORIENTED_EDGE('',*,*,#39677,.T.); +#39677 = EDGE_CURVE('',#38769,#39399,#39678,.T.); +#39678 = LINE('',#39679,#39680); +#39679 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39680 = VECTOR('',#39681,1.); +#39681 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39682 = ORIENTED_EDGE('',*,*,#39396,.F.); +#39683 = ORIENTED_EDGE('',*,*,#39684,.F.); +#39684 = EDGE_CURVE('',#39685,#39397,#39687,.T.); +#39685 = VERTEX_POINT('',#39686); +#39686 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#39687 = LINE('',#39688,#39689); +#39688 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#39689 = VECTOR('',#39690,1.); +#39690 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39691 = ORIENTED_EDGE('',*,*,#39692,.F.); +#39692 = EDGE_CURVE('',#39693,#39685,#39695,.T.); +#39693 = VERTEX_POINT('',#39694); +#39694 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#39695 = LINE('',#39696,#39697); +#39696 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#39697 = VECTOR('',#39698,1.); +#39698 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39699 = ORIENTED_EDGE('',*,*,#39700,.F.); +#39700 = EDGE_CURVE('',#39609,#39693,#39701,.T.); +#39701 = LINE('',#39702,#39703); +#39702 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39703 = VECTOR('',#39704,1.); +#39704 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#39705 = ORIENTED_EDGE('',*,*,#39608,.F.); +#39706 = ORIENTED_EDGE('',*,*,#39707,.F.); +#39707 = EDGE_CURVE('',#39259,#39601,#39708,.T.); +#39708 = LINE('',#39709,#39710); +#39709 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#39710 = VECTOR('',#39711,1.); +#39711 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39712 = ORIENTED_EDGE('',*,*,#39274,.T.); +#39713 = ORIENTED_EDGE('',*,*,#39319,.T.); +#39714 = ORIENTED_EDGE('',*,*,#39336,.T.); +#39715 = ORIENTED_EDGE('',*,*,#39290,.T.); +#39716 = PLANE('',#39717); +#39717 = AXIS2_PLACEMENT_3D('',#39718,#39719,#39720); +#39718 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#39719 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#39720 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#39721 = ADVANCED_FACE('',(#39722),#39808,.F.); +#39722 = FACE_BOUND('',#39723,.F.); +#39723 = EDGE_LOOP('',(#39724,#39725,#39726,#39735,#39743,#39752,#39760, + #39768,#39776,#39785,#39793,#39802)); +#39724 = ORIENTED_EDGE('',*,*,#38768,.F.); +#39725 = ORIENTED_EDGE('',*,*,#38790,.T.); +#39726 = ORIENTED_EDGE('',*,*,#39727,.T.); +#39727 = EDGE_CURVE('',#38791,#39728,#39730,.T.); +#39728 = VERTEX_POINT('',#39729); +#39729 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#39730 = CIRCLE('',#39731,0.1); +#39731 = AXIS2_PLACEMENT_3D('',#39732,#39733,#39734); +#39732 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#39733 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#39734 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39735 = ORIENTED_EDGE('',*,*,#39736,.T.); +#39736 = EDGE_CURVE('',#39728,#39737,#39739,.T.); +#39737 = VERTEX_POINT('',#39738); +#39738 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467)); +#39739 = LINE('',#39740,#39741); +#39740 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#39741 = VECTOR('',#39742,1.); +#39742 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#39743 = ORIENTED_EDGE('',*,*,#39744,.T.); +#39744 = EDGE_CURVE('',#39737,#39745,#39747,.T.); +#39745 = VERTEX_POINT('',#39746); +#39746 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#39747 = CIRCLE('',#39748,0.3); +#39748 = AXIS2_PLACEMENT_3D('',#39749,#39750,#39751); +#39749 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#39750 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39751 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#39752 = ORIENTED_EDGE('',*,*,#39753,.T.); +#39753 = EDGE_CURVE('',#39745,#39754,#39756,.T.); +#39754 = VERTEX_POINT('',#39755); +#39755 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#39756 = LINE('',#39757,#39758); +#39757 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#39758 = VECTOR('',#39759,1.); +#39759 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39760 = ORIENTED_EDGE('',*,*,#39761,.T.); +#39761 = EDGE_CURVE('',#39754,#39762,#39764,.T.); +#39762 = VERTEX_POINT('',#39763); +#39763 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#39764 = LINE('',#39765,#39766); +#39765 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#39766 = VECTOR('',#39767,1.); +#39767 = DIRECTION('',(0.,0.,1.)); +#39768 = ORIENTED_EDGE('',*,*,#39769,.T.); +#39769 = EDGE_CURVE('',#39762,#39770,#39772,.T.); +#39770 = VERTEX_POINT('',#39771); +#39771 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2)); +#39772 = LINE('',#39773,#39774); +#39773 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#39774 = VECTOR('',#39775,1.); +#39775 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39776 = ORIENTED_EDGE('',*,*,#39777,.T.); +#39777 = EDGE_CURVE('',#39770,#39778,#39780,.T.); +#39778 = VERTEX_POINT('',#39779); +#39779 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#39780 = CIRCLE('',#39781,0.1); +#39781 = AXIS2_PLACEMENT_3D('',#39782,#39783,#39784); +#39782 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#39783 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#39784 = DIRECTION('',(0.,0.,-1.)); +#39785 = ORIENTED_EDGE('',*,*,#39786,.T.); +#39786 = EDGE_CURVE('',#39778,#39787,#39789,.T.); +#39787 = VERTEX_POINT('',#39788); +#39788 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533)); +#39789 = LINE('',#39790,#39791); +#39790 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#39791 = VECTOR('',#39792,1.); +#39792 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#39793 = ORIENTED_EDGE('',*,*,#39794,.T.); +#39794 = EDGE_CURVE('',#39787,#39795,#39797,.T.); +#39795 = VERTEX_POINT('',#39796); +#39796 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39797 = CIRCLE('',#39798,0.3); +#39798 = AXIS2_PLACEMENT_3D('',#39799,#39800,#39801); +#39799 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#39800 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39801 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#39802 = ORIENTED_EDGE('',*,*,#39803,.T.); +#39803 = EDGE_CURVE('',#39795,#38769,#39804,.T.); +#39804 = LINE('',#39805,#39806); +#39805 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39806 = VECTOR('',#39807,1.); +#39807 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39808 = PLANE('',#39809); +#39809 = AXIS2_PLACEMENT_3D('',#39810,#39811,#39812); +#39810 = CARTESIAN_POINT('',(-2.42560961319,-2.11,0.548953137803)); +#39811 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39812 = DIRECTION('',(0.,-0.,1.)); +#39813 = ADVANCED_FACE('',(#39814),#39833,.F.); +#39814 = FACE_BOUND('',#39815,.F.); +#39815 = EDGE_LOOP('',(#39816,#39817,#39826,#39832)); +#39816 = ORIENTED_EDGE('',*,*,#38807,.T.); +#39817 = ORIENTED_EDGE('',*,*,#39818,.T.); +#39818 = EDGE_CURVE('',#38800,#39819,#39821,.T.); +#39819 = VERTEX_POINT('',#39820); +#39820 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767)); +#39821 = CIRCLE('',#39822,0.1); +#39822 = AXIS2_PLACEMENT_3D('',#39823,#39824,#39825); +#39823 = CARTESIAN_POINT('',(-2.25,-1.7,0.725)); +#39824 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#39825 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39826 = ORIENTED_EDGE('',*,*,#39827,.F.); +#39827 = EDGE_CURVE('',#39728,#39819,#39828,.T.); +#39828 = LINE('',#39829,#39830); +#39829 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#39830 = VECTOR('',#39831,1.); +#39831 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39832 = ORIENTED_EDGE('',*,*,#39727,.F.); +#39833 = CYLINDRICAL_SURFACE('',#39834,0.1); +#39834 = AXIS2_PLACEMENT_3D('',#39835,#39836,#39837); +#39835 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#39836 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#39837 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39838 = ADVANCED_FACE('',(#39839),#39917,.T.); +#39839 = FACE_BOUND('',#39840,.T.); +#39840 = EDGE_LOOP('',(#39841,#39842,#39843,#39844,#39852,#39861,#39869, + #39877,#39885,#39894,#39902,#39911)); +#39841 = ORIENTED_EDGE('',*,*,#38821,.F.); +#39842 = ORIENTED_EDGE('',*,*,#38799,.T.); +#39843 = ORIENTED_EDGE('',*,*,#39818,.T.); +#39844 = ORIENTED_EDGE('',*,*,#39845,.T.); +#39845 = EDGE_CURVE('',#39819,#39846,#39848,.T.); +#39846 = VERTEX_POINT('',#39847); +#39847 = CARTESIAN_POINT('',(-2.429496640897,-1.7,0.2479055467)); +#39848 = LINE('',#39849,#39850); +#39849 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767)); +#39850 = VECTOR('',#39851,1.); +#39851 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#39852 = ORIENTED_EDGE('',*,*,#39853,.T.); +#39853 = EDGE_CURVE('',#39846,#39854,#39856,.T.); +#39854 = VERTEX_POINT('',#39855); +#39855 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16)); +#39856 = CIRCLE('',#39857,0.3); +#39857 = AXIS2_PLACEMENT_3D('',#39858,#39859,#39860); +#39858 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3)); +#39859 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39860 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#39861 = ORIENTED_EDGE('',*,*,#39862,.T.); +#39862 = EDGE_CURVE('',#39854,#39863,#39865,.T.); +#39863 = VERTEX_POINT('',#39864); +#39864 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16)); +#39865 = LINE('',#39866,#39867); +#39866 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16)); +#39867 = VECTOR('',#39868,1.); +#39868 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39869 = ORIENTED_EDGE('',*,*,#39870,.T.); +#39870 = EDGE_CURVE('',#39863,#39871,#39873,.T.); +#39871 = VERTEX_POINT('',#39872); +#39872 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#39873 = LINE('',#39874,#39875); +#39874 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16)); +#39875 = VECTOR('',#39876,1.); +#39876 = DIRECTION('',(0.,0.,1.)); +#39877 = ORIENTED_EDGE('',*,*,#39878,.T.); +#39878 = EDGE_CURVE('',#39871,#39879,#39881,.T.); +#39879 = VERTEX_POINT('',#39880); +#39880 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.2)); +#39881 = LINE('',#39882,#39883); +#39882 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#39883 = VECTOR('',#39884,1.); +#39884 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39885 = ORIENTED_EDGE('',*,*,#39886,.T.); +#39886 = EDGE_CURVE('',#39879,#39887,#39889,.T.); +#39887 = VERTEX_POINT('',#39888); +#39888 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233)); +#39889 = CIRCLE('',#39890,0.1); +#39890 = AXIS2_PLACEMENT_3D('',#39891,#39892,#39893); +#39891 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3)); +#39892 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#39893 = DIRECTION('',(0.,0.,-1.)); +#39894 = ORIENTED_EDGE('',*,*,#39895,.T.); +#39895 = EDGE_CURVE('',#39887,#39896,#39898,.T.); +#39896 = VERTEX_POINT('',#39897); +#39897 = CARTESIAN_POINT('',(-2.545442325904,-1.7,0.7770944533)); +#39898 = LINE('',#39899,#39900); +#39899 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233)); +#39900 = VECTOR('',#39901,1.); +#39901 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#39902 = ORIENTED_EDGE('',*,*,#39903,.T.); +#39903 = EDGE_CURVE('',#39896,#39904,#39906,.T.); +#39904 = VERTEX_POINT('',#39905); +#39905 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#39906 = CIRCLE('',#39907,0.3); +#39907 = AXIS2_PLACEMENT_3D('',#39908,#39909,#39910); +#39908 = CARTESIAN_POINT('',(-2.25,-1.7,0.725)); +#39909 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39910 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#39911 = ORIENTED_EDGE('',*,*,#39912,.T.); +#39912 = EDGE_CURVE('',#39904,#38822,#39913,.T.); +#39913 = LINE('',#39914,#39915); +#39914 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#39915 = VECTOR('',#39916,1.); +#39916 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39917 = PLANE('',#39918); +#39918 = AXIS2_PLACEMENT_3D('',#39919,#39920,#39921); +#39919 = CARTESIAN_POINT('',(-2.42560961319,-1.7,0.548953137803)); +#39920 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39921 = DIRECTION('',(0.,-0.,1.)); +#39922 = ADVANCED_FACE('',(#39923),#39939,.F.); +#39923 = FACE_BOUND('',#39924,.F.); +#39924 = EDGE_LOOP('',(#39925,#39926,#39932,#39933)); +#39925 = ORIENTED_EDGE('',*,*,#38838,.T.); +#39926 = ORIENTED_EDGE('',*,*,#39927,.T.); +#39927 = EDGE_CURVE('',#38831,#39415,#39928,.T.); +#39928 = LINE('',#39929,#39930); +#39929 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#39930 = VECTOR('',#39931,1.); +#39931 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39932 = ORIENTED_EDGE('',*,*,#39414,.F.); +#39933 = ORIENTED_EDGE('',*,*,#39934,.F.); +#39934 = EDGE_CURVE('',#38822,#39407,#39935,.T.); +#39935 = LINE('',#39936,#39937); +#39936 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#39937 = VECTOR('',#39938,1.); +#39938 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39939 = PLANE('',#39940); +#39940 = AXIS2_PLACEMENT_3D('',#39941,#39942,#39943); +#39941 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#39942 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#39943 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#39944 = ADVANCED_FACE('',(#39945),#40031,.F.); +#39945 = FACE_BOUND('',#39946,.F.); +#39946 = EDGE_LOOP('',(#39947,#39948,#39949,#39958,#39966,#39975,#39983, + #39991,#39999,#40008,#40016,#40025)); +#39947 = ORIENTED_EDGE('',*,*,#38830,.F.); +#39948 = ORIENTED_EDGE('',*,*,#38852,.T.); +#39949 = ORIENTED_EDGE('',*,*,#39950,.T.); +#39950 = EDGE_CURVE('',#38853,#39951,#39953,.T.); +#39951 = VERTEX_POINT('',#39952); +#39952 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#39953 = CIRCLE('',#39954,0.1); +#39954 = AXIS2_PLACEMENT_3D('',#39955,#39956,#39957); +#39955 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#39956 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#39957 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39958 = ORIENTED_EDGE('',*,*,#39959,.T.); +#39959 = EDGE_CURVE('',#39951,#39960,#39962,.T.); +#39960 = VERTEX_POINT('',#39961); +#39961 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467)); +#39962 = LINE('',#39963,#39964); +#39963 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#39964 = VECTOR('',#39965,1.); +#39965 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#39966 = ORIENTED_EDGE('',*,*,#39967,.T.); +#39967 = EDGE_CURVE('',#39960,#39968,#39970,.T.); +#39968 = VERTEX_POINT('',#39969); +#39969 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#39970 = CIRCLE('',#39971,0.3); +#39971 = AXIS2_PLACEMENT_3D('',#39972,#39973,#39974); +#39972 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#39973 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39974 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#39975 = ORIENTED_EDGE('',*,*,#39976,.T.); +#39976 = EDGE_CURVE('',#39968,#39977,#39979,.T.); +#39977 = VERTEX_POINT('',#39978); +#39978 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#39979 = LINE('',#39980,#39981); +#39980 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#39981 = VECTOR('',#39982,1.); +#39982 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39983 = ORIENTED_EDGE('',*,*,#39984,.T.); +#39984 = EDGE_CURVE('',#39977,#39985,#39987,.T.); +#39985 = VERTEX_POINT('',#39986); +#39986 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#39987 = LINE('',#39988,#39989); +#39988 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#39989 = VECTOR('',#39990,1.); +#39990 = DIRECTION('',(0.,0.,1.)); +#39991 = ORIENTED_EDGE('',*,*,#39992,.T.); +#39992 = EDGE_CURVE('',#39985,#39993,#39995,.T.); +#39993 = VERTEX_POINT('',#39994); +#39994 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2)); +#39995 = LINE('',#39996,#39997); +#39996 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#39997 = VECTOR('',#39998,1.); +#39998 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39999 = ORIENTED_EDGE('',*,*,#40000,.T.); +#40000 = EDGE_CURVE('',#39993,#40001,#40003,.T.); +#40001 = VERTEX_POINT('',#40002); +#40002 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#40003 = CIRCLE('',#40004,0.1); +#40004 = AXIS2_PLACEMENT_3D('',#40005,#40006,#40007); +#40005 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#40006 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40007 = DIRECTION('',(0.,0.,-1.)); +#40008 = ORIENTED_EDGE('',*,*,#40009,.T.); +#40009 = EDGE_CURVE('',#40001,#40010,#40012,.T.); +#40010 = VERTEX_POINT('',#40011); +#40011 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533)); +#40012 = LINE('',#40013,#40014); +#40013 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#40014 = VECTOR('',#40015,1.); +#40015 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40016 = ORIENTED_EDGE('',*,*,#40017,.T.); +#40017 = EDGE_CURVE('',#40010,#40018,#40020,.T.); +#40018 = VERTEX_POINT('',#40019); +#40019 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#40020 = CIRCLE('',#40021,0.3); +#40021 = AXIS2_PLACEMENT_3D('',#40022,#40023,#40024); +#40022 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#40023 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40024 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40025 = ORIENTED_EDGE('',*,*,#40026,.T.); +#40026 = EDGE_CURVE('',#40018,#38831,#40027,.T.); +#40027 = LINE('',#40028,#40029); +#40028 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#40029 = VECTOR('',#40030,1.); +#40030 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40031 = PLANE('',#40032); +#40032 = AXIS2_PLACEMENT_3D('',#40033,#40034,#40035); +#40033 = CARTESIAN_POINT('',(-2.42560961319,-0.84,0.548953137803)); +#40034 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40035 = DIRECTION('',(0.,-0.,1.)); +#40036 = ADVANCED_FACE('',(#40037),#40056,.F.); +#40037 = FACE_BOUND('',#40038,.F.); +#40038 = EDGE_LOOP('',(#40039,#40040,#40049,#40055)); +#40039 = ORIENTED_EDGE('',*,*,#38869,.T.); +#40040 = ORIENTED_EDGE('',*,*,#40041,.T.); +#40041 = EDGE_CURVE('',#38862,#40042,#40044,.T.); +#40042 = VERTEX_POINT('',#40043); +#40043 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767)); +#40044 = CIRCLE('',#40045,0.1); +#40045 = AXIS2_PLACEMENT_3D('',#40046,#40047,#40048); +#40046 = CARTESIAN_POINT('',(-2.25,-0.43,0.725)); +#40047 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40048 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40049 = ORIENTED_EDGE('',*,*,#40050,.F.); +#40050 = EDGE_CURVE('',#39951,#40042,#40051,.T.); +#40051 = LINE('',#40052,#40053); +#40052 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#40053 = VECTOR('',#40054,1.); +#40054 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40055 = ORIENTED_EDGE('',*,*,#39950,.F.); +#40056 = CYLINDRICAL_SURFACE('',#40057,0.1); +#40057 = AXIS2_PLACEMENT_3D('',#40058,#40059,#40060); +#40058 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#40059 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#40060 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40061 = ADVANCED_FACE('',(#40062),#40140,.T.); +#40062 = FACE_BOUND('',#40063,.T.); +#40063 = EDGE_LOOP('',(#40064,#40065,#40066,#40067,#40075,#40084,#40092, + #40100,#40108,#40117,#40125,#40134)); +#40064 = ORIENTED_EDGE('',*,*,#38883,.F.); +#40065 = ORIENTED_EDGE('',*,*,#38861,.T.); +#40066 = ORIENTED_EDGE('',*,*,#40041,.T.); +#40067 = ORIENTED_EDGE('',*,*,#40068,.T.); +#40068 = EDGE_CURVE('',#40042,#40069,#40071,.T.); +#40069 = VERTEX_POINT('',#40070); +#40070 = CARTESIAN_POINT('',(-2.429496640897,-0.43,0.2479055467)); +#40071 = LINE('',#40072,#40073); +#40072 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767)); +#40073 = VECTOR('',#40074,1.); +#40074 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40075 = ORIENTED_EDGE('',*,*,#40076,.T.); +#40076 = EDGE_CURVE('',#40069,#40077,#40079,.T.); +#40077 = VERTEX_POINT('',#40078); +#40078 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16) + ); +#40079 = CIRCLE('',#40080,0.3); +#40080 = AXIS2_PLACEMENT_3D('',#40081,#40082,#40083); +#40081 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3)); +#40082 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40083 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40084 = ORIENTED_EDGE('',*,*,#40085,.T.); +#40085 = EDGE_CURVE('',#40077,#40086,#40088,.T.); +#40086 = VERTEX_POINT('',#40087); +#40087 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16)); +#40088 = LINE('',#40089,#40090); +#40089 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16) + ); +#40090 = VECTOR('',#40091,1.); +#40091 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40092 = ORIENTED_EDGE('',*,*,#40093,.T.); +#40093 = EDGE_CURVE('',#40086,#40094,#40096,.T.); +#40094 = VERTEX_POINT('',#40095); +#40095 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#40096 = LINE('',#40097,#40098); +#40097 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16)); +#40098 = VECTOR('',#40099,1.); +#40099 = DIRECTION('',(0.,0.,1.)); +#40100 = ORIENTED_EDGE('',*,*,#40101,.T.); +#40101 = EDGE_CURVE('',#40094,#40102,#40104,.T.); +#40102 = VERTEX_POINT('',#40103); +#40103 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.2)); +#40104 = LINE('',#40105,#40106); +#40105 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#40106 = VECTOR('',#40107,1.); +#40107 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40108 = ORIENTED_EDGE('',*,*,#40109,.T.); +#40109 = EDGE_CURVE('',#40102,#40110,#40112,.T.); +#40110 = VERTEX_POINT('',#40111); +#40111 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233)); +#40112 = CIRCLE('',#40113,0.1); +#40113 = AXIS2_PLACEMENT_3D('',#40114,#40115,#40116); +#40114 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3)); +#40115 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40116 = DIRECTION('',(0.,0.,-1.)); +#40117 = ORIENTED_EDGE('',*,*,#40118,.T.); +#40118 = EDGE_CURVE('',#40110,#40119,#40121,.T.); +#40119 = VERTEX_POINT('',#40120); +#40120 = CARTESIAN_POINT('',(-2.545442325904,-0.43,0.7770944533)); +#40121 = LINE('',#40122,#40123); +#40122 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233)); +#40123 = VECTOR('',#40124,1.); +#40124 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40125 = ORIENTED_EDGE('',*,*,#40126,.T.); +#40126 = EDGE_CURVE('',#40119,#40127,#40129,.T.); +#40127 = VERTEX_POINT('',#40128); +#40128 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#40129 = CIRCLE('',#40130,0.3); +#40130 = AXIS2_PLACEMENT_3D('',#40131,#40132,#40133); +#40131 = CARTESIAN_POINT('',(-2.25,-0.43,0.725)); +#40132 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40133 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40134 = ORIENTED_EDGE('',*,*,#40135,.T.); +#40135 = EDGE_CURVE('',#40127,#38884,#40136,.T.); +#40136 = LINE('',#40137,#40138); +#40137 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#40138 = VECTOR('',#40139,1.); +#40139 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40140 = PLANE('',#40141); +#40141 = AXIS2_PLACEMENT_3D('',#40142,#40143,#40144); +#40142 = CARTESIAN_POINT('',(-2.42560961319,-0.43,0.548953137803)); +#40143 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40144 = DIRECTION('',(0.,-0.,1.)); +#40145 = ADVANCED_FACE('',(#40146),#40162,.F.); +#40146 = FACE_BOUND('',#40147,.F.); +#40147 = EDGE_LOOP('',(#40148,#40149,#40155,#40156)); +#40148 = ORIENTED_EDGE('',*,*,#38900,.T.); +#40149 = ORIENTED_EDGE('',*,*,#40150,.T.); +#40150 = EDGE_CURVE('',#38893,#39431,#40151,.T.); +#40151 = LINE('',#40152,#40153); +#40152 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#40153 = VECTOR('',#40154,1.); +#40154 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40155 = ORIENTED_EDGE('',*,*,#39430,.F.); +#40156 = ORIENTED_EDGE('',*,*,#40157,.F.); +#40157 = EDGE_CURVE('',#38884,#39423,#40158,.T.); +#40158 = LINE('',#40159,#40160); +#40159 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#40160 = VECTOR('',#40161,1.); +#40161 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40162 = PLANE('',#40163); +#40163 = AXIS2_PLACEMENT_3D('',#40164,#40165,#40166); +#40164 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40165 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40166 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40167 = ADVANCED_FACE('',(#40168),#40254,.F.); +#40168 = FACE_BOUND('',#40169,.F.); +#40169 = EDGE_LOOP('',(#40170,#40171,#40172,#40181,#40189,#40198,#40206, + #40214,#40222,#40231,#40239,#40248)); +#40170 = ORIENTED_EDGE('',*,*,#38892,.F.); +#40171 = ORIENTED_EDGE('',*,*,#38914,.T.); +#40172 = ORIENTED_EDGE('',*,*,#40173,.T.); +#40173 = EDGE_CURVE('',#38915,#40174,#40176,.T.); +#40174 = VERTEX_POINT('',#40175); +#40175 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#40176 = CIRCLE('',#40177,0.1); +#40177 = AXIS2_PLACEMENT_3D('',#40178,#40179,#40180); +#40178 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#40179 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40180 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40181 = ORIENTED_EDGE('',*,*,#40182,.T.); +#40182 = EDGE_CURVE('',#40174,#40183,#40185,.T.); +#40183 = VERTEX_POINT('',#40184); +#40184 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467)); +#40185 = LINE('',#40186,#40187); +#40186 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#40187 = VECTOR('',#40188,1.); +#40188 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40189 = ORIENTED_EDGE('',*,*,#40190,.T.); +#40190 = EDGE_CURVE('',#40183,#40191,#40193,.T.); +#40191 = VERTEX_POINT('',#40192); +#40192 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#40193 = CIRCLE('',#40194,0.3); +#40194 = AXIS2_PLACEMENT_3D('',#40195,#40196,#40197); +#40195 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#40196 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40197 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40198 = ORIENTED_EDGE('',*,*,#40199,.T.); +#40199 = EDGE_CURVE('',#40191,#40200,#40202,.T.); +#40200 = VERTEX_POINT('',#40201); +#40201 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#40202 = LINE('',#40203,#40204); +#40203 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#40204 = VECTOR('',#40205,1.); +#40205 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40206 = ORIENTED_EDGE('',*,*,#40207,.T.); +#40207 = EDGE_CURVE('',#40200,#40208,#40210,.T.); +#40208 = VERTEX_POINT('',#40209); +#40209 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#40210 = LINE('',#40211,#40212); +#40211 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#40212 = VECTOR('',#40213,1.); +#40213 = DIRECTION('',(0.,0.,1.)); +#40214 = ORIENTED_EDGE('',*,*,#40215,.T.); +#40215 = EDGE_CURVE('',#40208,#40216,#40218,.T.); +#40216 = VERTEX_POINT('',#40217); +#40217 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2)); +#40218 = LINE('',#40219,#40220); +#40219 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#40220 = VECTOR('',#40221,1.); +#40221 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40222 = ORIENTED_EDGE('',*,*,#40223,.T.); +#40223 = EDGE_CURVE('',#40216,#40224,#40226,.T.); +#40224 = VERTEX_POINT('',#40225); +#40225 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#40226 = CIRCLE('',#40227,0.1); +#40227 = AXIS2_PLACEMENT_3D('',#40228,#40229,#40230); +#40228 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#40229 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40230 = DIRECTION('',(0.,0.,-1.)); +#40231 = ORIENTED_EDGE('',*,*,#40232,.T.); +#40232 = EDGE_CURVE('',#40224,#40233,#40235,.T.); +#40233 = VERTEX_POINT('',#40234); +#40234 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533)); +#40235 = LINE('',#40236,#40237); +#40236 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#40237 = VECTOR('',#40238,1.); +#40238 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40239 = ORIENTED_EDGE('',*,*,#40240,.T.); +#40240 = EDGE_CURVE('',#40233,#40241,#40243,.T.); +#40241 = VERTEX_POINT('',#40242); +#40242 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#40243 = CIRCLE('',#40244,0.3); +#40244 = AXIS2_PLACEMENT_3D('',#40245,#40246,#40247); +#40245 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#40246 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40247 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40248 = ORIENTED_EDGE('',*,*,#40249,.T.); +#40249 = EDGE_CURVE('',#40241,#38893,#40250,.T.); +#40250 = LINE('',#40251,#40252); +#40251 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#40252 = VECTOR('',#40253,1.); +#40253 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40254 = PLANE('',#40255); +#40255 = AXIS2_PLACEMENT_3D('',#40256,#40257,#40258); +#40256 = CARTESIAN_POINT('',(-2.42560961319,0.43,0.548953137803)); +#40257 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40258 = DIRECTION('',(0.,-0.,1.)); +#40259 = ADVANCED_FACE('',(#40260),#40279,.F.); +#40260 = FACE_BOUND('',#40261,.F.); +#40261 = EDGE_LOOP('',(#40262,#40263,#40272,#40278)); +#40262 = ORIENTED_EDGE('',*,*,#38931,.T.); +#40263 = ORIENTED_EDGE('',*,*,#40264,.T.); +#40264 = EDGE_CURVE('',#38924,#40265,#40267,.T.); +#40265 = VERTEX_POINT('',#40266); +#40266 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767)); +#40267 = CIRCLE('',#40268,0.1); +#40268 = AXIS2_PLACEMENT_3D('',#40269,#40270,#40271); +#40269 = CARTESIAN_POINT('',(-2.25,0.84,0.725)); +#40270 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40271 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40272 = ORIENTED_EDGE('',*,*,#40273,.F.); +#40273 = EDGE_CURVE('',#40174,#40265,#40274,.T.); +#40274 = LINE('',#40275,#40276); +#40275 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#40276 = VECTOR('',#40277,1.); +#40277 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40278 = ORIENTED_EDGE('',*,*,#40173,.F.); +#40279 = CYLINDRICAL_SURFACE('',#40280,0.1); +#40280 = AXIS2_PLACEMENT_3D('',#40281,#40282,#40283); +#40281 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#40282 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#40283 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40284 = ADVANCED_FACE('',(#40285),#40363,.T.); +#40285 = FACE_BOUND('',#40286,.T.); +#40286 = EDGE_LOOP('',(#40287,#40288,#40289,#40290,#40298,#40307,#40315, + #40323,#40331,#40340,#40348,#40357)); +#40287 = ORIENTED_EDGE('',*,*,#38945,.F.); +#40288 = ORIENTED_EDGE('',*,*,#38923,.T.); +#40289 = ORIENTED_EDGE('',*,*,#40264,.T.); +#40290 = ORIENTED_EDGE('',*,*,#40291,.T.); +#40291 = EDGE_CURVE('',#40265,#40292,#40294,.T.); +#40292 = VERTEX_POINT('',#40293); +#40293 = CARTESIAN_POINT('',(-2.429496640897,0.84,0.2479055467)); +#40294 = LINE('',#40295,#40296); +#40295 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767)); +#40296 = VECTOR('',#40297,1.); +#40297 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40298 = ORIENTED_EDGE('',*,*,#40299,.T.); +#40299 = EDGE_CURVE('',#40292,#40300,#40302,.T.); +#40300 = VERTEX_POINT('',#40301); +#40301 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16)); +#40302 = CIRCLE('',#40303,0.3); +#40303 = AXIS2_PLACEMENT_3D('',#40304,#40305,#40306); +#40304 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3)); +#40305 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40306 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40307 = ORIENTED_EDGE('',*,*,#40308,.T.); +#40308 = EDGE_CURVE('',#40300,#40309,#40311,.T.); +#40309 = VERTEX_POINT('',#40310); +#40310 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16)); +#40311 = LINE('',#40312,#40313); +#40312 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16)); +#40313 = VECTOR('',#40314,1.); +#40314 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40315 = ORIENTED_EDGE('',*,*,#40316,.T.); +#40316 = EDGE_CURVE('',#40309,#40317,#40319,.T.); +#40317 = VERTEX_POINT('',#40318); +#40318 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#40319 = LINE('',#40320,#40321); +#40320 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16)); +#40321 = VECTOR('',#40322,1.); +#40322 = DIRECTION('',(0.,0.,1.)); +#40323 = ORIENTED_EDGE('',*,*,#40324,.T.); +#40324 = EDGE_CURVE('',#40317,#40325,#40327,.T.); +#40325 = VERTEX_POINT('',#40326); +#40326 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.2)); +#40327 = LINE('',#40328,#40329); +#40328 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#40329 = VECTOR('',#40330,1.); +#40330 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40331 = ORIENTED_EDGE('',*,*,#40332,.T.); +#40332 = EDGE_CURVE('',#40325,#40333,#40335,.T.); +#40333 = VERTEX_POINT('',#40334); +#40334 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233)); +#40335 = CIRCLE('',#40336,0.1); +#40336 = AXIS2_PLACEMENT_3D('',#40337,#40338,#40339); +#40337 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3)); +#40338 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40339 = DIRECTION('',(0.,0.,-1.)); +#40340 = ORIENTED_EDGE('',*,*,#40341,.T.); +#40341 = EDGE_CURVE('',#40333,#40342,#40344,.T.); +#40342 = VERTEX_POINT('',#40343); +#40343 = CARTESIAN_POINT('',(-2.545442325904,0.84,0.7770944533)); +#40344 = LINE('',#40345,#40346); +#40345 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233)); +#40346 = VECTOR('',#40347,1.); +#40347 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40348 = ORIENTED_EDGE('',*,*,#40349,.T.); +#40349 = EDGE_CURVE('',#40342,#40350,#40352,.T.); +#40350 = VERTEX_POINT('',#40351); +#40351 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#40352 = CIRCLE('',#40353,0.3); +#40353 = AXIS2_PLACEMENT_3D('',#40354,#40355,#40356); +#40354 = CARTESIAN_POINT('',(-2.25,0.84,0.725)); +#40355 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40356 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40357 = ORIENTED_EDGE('',*,*,#40358,.T.); +#40358 = EDGE_CURVE('',#40350,#38946,#40359,.T.); +#40359 = LINE('',#40360,#40361); +#40360 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#40361 = VECTOR('',#40362,1.); +#40362 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40363 = PLANE('',#40364); +#40364 = AXIS2_PLACEMENT_3D('',#40365,#40366,#40367); +#40365 = CARTESIAN_POINT('',(-2.42560961319,0.84,0.548953137803)); +#40366 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40367 = DIRECTION('',(0.,-0.,1.)); +#40368 = ADVANCED_FACE('',(#40369),#40380,.F.); +#40369 = FACE_BOUND('',#40370,.F.); +#40370 = EDGE_LOOP('',(#40371,#40372,#40373,#40374)); +#40371 = ORIENTED_EDGE('',*,*,#38962,.T.); +#40372 = ORIENTED_EDGE('',*,*,#39382,.T.); +#40373 = ORIENTED_EDGE('',*,*,#39446,.F.); +#40374 = ORIENTED_EDGE('',*,*,#40375,.F.); +#40375 = EDGE_CURVE('',#38946,#39439,#40376,.T.); +#40376 = LINE('',#40377,#40378); +#40377 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#40378 = VECTOR('',#40379,1.); +#40379 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40380 = PLANE('',#40381); +#40381 = AXIS2_PLACEMENT_3D('',#40382,#40383,#40384); +#40382 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40383 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40384 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40385 = ADVANCED_FACE('',(#40386),#40465,.F.); +#40386 = FACE_BOUND('',#40387,.F.); +#40387 = EDGE_LOOP('',(#40388,#40389,#40390,#40399,#40407,#40416,#40424, + #40432,#40440,#40449,#40457,#40464)); +#40388 = ORIENTED_EDGE('',*,*,#38954,.F.); +#40389 = ORIENTED_EDGE('',*,*,#38976,.T.); +#40390 = ORIENTED_EDGE('',*,*,#40391,.T.); +#40391 = EDGE_CURVE('',#38977,#40392,#40394,.T.); +#40392 = VERTEX_POINT('',#40393); +#40393 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#40394 = CIRCLE('',#40395,0.1); +#40395 = AXIS2_PLACEMENT_3D('',#40396,#40397,#40398); +#40396 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#40397 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40398 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40399 = ORIENTED_EDGE('',*,*,#40400,.T.); +#40400 = EDGE_CURVE('',#40392,#40401,#40403,.T.); +#40401 = VERTEX_POINT('',#40402); +#40402 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467)); +#40403 = LINE('',#40404,#40405); +#40404 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#40405 = VECTOR('',#40406,1.); +#40406 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40407 = ORIENTED_EDGE('',*,*,#40408,.T.); +#40408 = EDGE_CURVE('',#40401,#40409,#40411,.T.); +#40409 = VERTEX_POINT('',#40410); +#40410 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#40411 = CIRCLE('',#40412,0.3); +#40412 = AXIS2_PLACEMENT_3D('',#40413,#40414,#40415); +#40413 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#40414 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40415 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40416 = ORIENTED_EDGE('',*,*,#40417,.T.); +#40417 = EDGE_CURVE('',#40409,#40418,#40420,.T.); +#40418 = VERTEX_POINT('',#40419); +#40419 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#40420 = LINE('',#40421,#40422); +#40421 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#40422 = VECTOR('',#40423,1.); +#40423 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40424 = ORIENTED_EDGE('',*,*,#40425,.T.); +#40425 = EDGE_CURVE('',#40418,#40426,#40428,.T.); +#40426 = VERTEX_POINT('',#40427); +#40427 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#40428 = LINE('',#40429,#40430); +#40429 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#40430 = VECTOR('',#40431,1.); +#40431 = DIRECTION('',(0.,0.,1.)); +#40432 = ORIENTED_EDGE('',*,*,#40433,.T.); +#40433 = EDGE_CURVE('',#40426,#40434,#40436,.T.); +#40434 = VERTEX_POINT('',#40435); +#40435 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2)); +#40436 = LINE('',#40437,#40438); +#40437 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#40438 = VECTOR('',#40439,1.); +#40439 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40440 = ORIENTED_EDGE('',*,*,#40441,.T.); +#40441 = EDGE_CURVE('',#40434,#40442,#40444,.T.); +#40442 = VERTEX_POINT('',#40443); +#40443 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#40444 = CIRCLE('',#40445,0.1); +#40445 = AXIS2_PLACEMENT_3D('',#40446,#40447,#40448); +#40446 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#40447 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40448 = DIRECTION('',(0.,0.,-1.)); +#40449 = ORIENTED_EDGE('',*,*,#40450,.T.); +#40450 = EDGE_CURVE('',#40442,#40451,#40453,.T.); +#40451 = VERTEX_POINT('',#40452); +#40452 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533)); +#40453 = LINE('',#40454,#40455); +#40454 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#40455 = VECTOR('',#40456,1.); +#40456 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40457 = ORIENTED_EDGE('',*,*,#40458,.T.); +#40458 = EDGE_CURVE('',#40451,#39352,#40459,.T.); +#40459 = CIRCLE('',#40460,0.3); +#40460 = AXIS2_PLACEMENT_3D('',#40461,#40462,#40463); +#40461 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#40462 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40463 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40464 = ORIENTED_EDGE('',*,*,#39351,.T.); +#40465 = PLANE('',#40466); +#40466 = AXIS2_PLACEMENT_3D('',#40467,#40468,#40469); +#40467 = CARTESIAN_POINT('',(-2.42560961319,1.7,0.548953137803)); +#40468 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40469 = DIRECTION('',(0.,-0.,1.)); +#40470 = ADVANCED_FACE('',(#40471),#40490,.F.); +#40471 = FACE_BOUND('',#40472,.F.); +#40472 = EDGE_LOOP('',(#40473,#40474,#40483,#40489)); +#40473 = ORIENTED_EDGE('',*,*,#38993,.T.); +#40474 = ORIENTED_EDGE('',*,*,#40475,.T.); +#40475 = EDGE_CURVE('',#38986,#40476,#40478,.T.); +#40476 = VERTEX_POINT('',#40477); +#40477 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767)); +#40478 = CIRCLE('',#40479,0.1); +#40479 = AXIS2_PLACEMENT_3D('',#40480,#40481,#40482); +#40480 = CARTESIAN_POINT('',(-2.25,2.11,0.725)); +#40481 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40482 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40483 = ORIENTED_EDGE('',*,*,#40484,.F.); +#40484 = EDGE_CURVE('',#40392,#40476,#40485,.T.); +#40485 = LINE('',#40486,#40487); +#40486 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#40487 = VECTOR('',#40488,1.); +#40488 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40489 = ORIENTED_EDGE('',*,*,#40391,.F.); +#40490 = CYLINDRICAL_SURFACE('',#40491,0.1); +#40491 = AXIS2_PLACEMENT_3D('',#40492,#40493,#40494); +#40492 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#40493 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#40494 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40495 = ADVANCED_FACE('',(#40496),#40567,.T.); +#40496 = FACE_BOUND('',#40497,.T.); +#40497 = EDGE_LOOP('',(#40498,#40499,#40500,#40501,#40509,#40518,#40526, + #40534,#40542,#40551,#40559,#40566)); +#40498 = ORIENTED_EDGE('',*,*,#39007,.F.); +#40499 = ORIENTED_EDGE('',*,*,#38985,.T.); +#40500 = ORIENTED_EDGE('',*,*,#40475,.T.); +#40501 = ORIENTED_EDGE('',*,*,#40502,.T.); +#40502 = EDGE_CURVE('',#40476,#40503,#40505,.T.); +#40503 = VERTEX_POINT('',#40504); +#40504 = CARTESIAN_POINT('',(-2.429496640897,2.11,0.2479055467)); +#40505 = LINE('',#40506,#40507); +#40506 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767)); +#40507 = VECTOR('',#40508,1.); +#40508 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40509 = ORIENTED_EDGE('',*,*,#40510,.T.); +#40510 = EDGE_CURVE('',#40503,#40511,#40513,.T.); +#40511 = VERTEX_POINT('',#40512); +#40512 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16)); +#40513 = CIRCLE('',#40514,0.3); +#40514 = AXIS2_PLACEMENT_3D('',#40515,#40516,#40517); +#40515 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3)); +#40516 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40517 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40518 = ORIENTED_EDGE('',*,*,#40519,.T.); +#40519 = EDGE_CURVE('',#40511,#40520,#40522,.T.); +#40520 = VERTEX_POINT('',#40521); +#40521 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16)); +#40522 = LINE('',#40523,#40524); +#40523 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16)); +#40524 = VECTOR('',#40525,1.); +#40525 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40526 = ORIENTED_EDGE('',*,*,#40527,.T.); +#40527 = EDGE_CURVE('',#40520,#40528,#40530,.T.); +#40528 = VERTEX_POINT('',#40529); +#40529 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#40530 = LINE('',#40531,#40532); +#40531 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16)); +#40532 = VECTOR('',#40533,1.); +#40533 = DIRECTION('',(0.,0.,1.)); +#40534 = ORIENTED_EDGE('',*,*,#40535,.T.); +#40535 = EDGE_CURVE('',#40528,#40536,#40538,.T.); +#40536 = VERTEX_POINT('',#40537); +#40537 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.2)); +#40538 = LINE('',#40539,#40540); +#40539 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#40540 = VECTOR('',#40541,1.); +#40541 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40542 = ORIENTED_EDGE('',*,*,#40543,.T.); +#40543 = EDGE_CURVE('',#40536,#40544,#40546,.T.); +#40544 = VERTEX_POINT('',#40545); +#40545 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233)); +#40546 = CIRCLE('',#40547,0.1); +#40547 = AXIS2_PLACEMENT_3D('',#40548,#40549,#40550); +#40548 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3)); +#40549 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40550 = DIRECTION('',(0.,0.,-1.)); +#40551 = ORIENTED_EDGE('',*,*,#40552,.T.); +#40552 = EDGE_CURVE('',#40544,#40553,#40555,.T.); +#40553 = VERTEX_POINT('',#40554); +#40554 = CARTESIAN_POINT('',(-2.545442325904,2.11,0.7770944533)); +#40555 = LINE('',#40556,#40557); +#40556 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233)); +#40557 = VECTOR('',#40558,1.); +#40558 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40559 = ORIENTED_EDGE('',*,*,#40560,.T.); +#40560 = EDGE_CURVE('',#40553,#39360,#40561,.T.); +#40561 = CIRCLE('',#40562,0.3); +#40562 = AXIS2_PLACEMENT_3D('',#40563,#40564,#40565); +#40563 = CARTESIAN_POINT('',(-2.25,2.11,0.725)); +#40564 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40565 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40566 = ORIENTED_EDGE('',*,*,#39367,.T.); +#40567 = PLANE('',#40568); +#40568 = AXIS2_PLACEMENT_3D('',#40569,#40570,#40571); +#40569 = CARTESIAN_POINT('',(-2.42560961319,2.11,0.548953137803)); +#40570 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40571 = DIRECTION('',(0.,-0.,1.)); +#40572 = ADVANCED_FACE('',(#40573),#40652,.F.); +#40573 = FACE_BOUND('',#40574,.F.); +#40574 = EDGE_LOOP('',(#40575,#40576,#40577,#40586,#40594,#40603,#40611, + #40619,#40627,#40636,#40644,#40651)); +#40575 = ORIENTED_EDGE('',*,*,#39026,.F.); +#40576 = ORIENTED_EDGE('',*,*,#39041,.T.); +#40577 = ORIENTED_EDGE('',*,*,#40578,.T.); +#40578 = EDGE_CURVE('',#39042,#40579,#40581,.T.); +#40579 = VERTEX_POINT('',#40580); +#40580 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#40581 = CIRCLE('',#40582,0.1); +#40582 = AXIS2_PLACEMENT_3D('',#40583,#40584,#40585); +#40583 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#40584 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40585 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40586 = ORIENTED_EDGE('',*,*,#40587,.T.); +#40587 = EDGE_CURVE('',#40579,#40588,#40590,.T.); +#40588 = VERTEX_POINT('',#40589); +#40589 = CARTESIAN_POINT('',(2.429496640897,2.11,0.2479055467)); +#40590 = LINE('',#40591,#40592); +#40591 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#40592 = VECTOR('',#40593,1.); +#40593 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40594 = ORIENTED_EDGE('',*,*,#40595,.T.); +#40595 = EDGE_CURVE('',#40588,#40596,#40598,.T.); +#40596 = VERTEX_POINT('',#40597); +#40597 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#40598 = CIRCLE('',#40599,0.3); +#40599 = AXIS2_PLACEMENT_3D('',#40600,#40601,#40602); +#40600 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#40601 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40602 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40603 = ORIENTED_EDGE('',*,*,#40604,.T.); +#40604 = EDGE_CURVE('',#40596,#40605,#40607,.T.); +#40605 = VERTEX_POINT('',#40606); +#40606 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#40607 = LINE('',#40608,#40609); +#40608 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#40609 = VECTOR('',#40610,1.); +#40610 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40611 = ORIENTED_EDGE('',*,*,#40612,.T.); +#40612 = EDGE_CURVE('',#40605,#40613,#40615,.T.); +#40613 = VERTEX_POINT('',#40614); +#40614 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#40615 = LINE('',#40616,#40617); +#40616 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#40617 = VECTOR('',#40618,1.); +#40618 = DIRECTION('',(0.,0.,1.)); +#40619 = ORIENTED_EDGE('',*,*,#40620,.T.); +#40620 = EDGE_CURVE('',#40613,#40621,#40623,.T.); +#40621 = VERTEX_POINT('',#40622); +#40622 = CARTESIAN_POINT('',(2.724938966801,2.11,0.2)); +#40623 = LINE('',#40624,#40625); +#40624 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#40625 = VECTOR('',#40626,1.); +#40626 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40627 = ORIENTED_EDGE('',*,*,#40628,.T.); +#40628 = EDGE_CURVE('',#40621,#40629,#40631,.T.); +#40629 = VERTEX_POINT('',#40630); +#40630 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#40631 = CIRCLE('',#40632,0.1); +#40632 = AXIS2_PLACEMENT_3D('',#40633,#40634,#40635); +#40633 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#40634 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40635 = DIRECTION('',(0.,0.,-1.)); +#40636 = ORIENTED_EDGE('',*,*,#40637,.T.); +#40637 = EDGE_CURVE('',#40629,#40638,#40640,.T.); +#40638 = VERTEX_POINT('',#40639); +#40639 = CARTESIAN_POINT('',(2.545442325904,2.11,0.7770944533)); +#40640 = LINE('',#40641,#40642); +#40641 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#40642 = VECTOR('',#40643,1.); +#40643 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40644 = ORIENTED_EDGE('',*,*,#40645,.T.); +#40645 = EDGE_CURVE('',#40638,#39639,#40646,.T.); +#40646 = CIRCLE('',#40647,0.3); +#40647 = AXIS2_PLACEMENT_3D('',#40648,#40649,#40650); +#40648 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#40649 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40650 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40651 = ORIENTED_EDGE('',*,*,#39638,.T.); +#40652 = PLANE('',#40653); +#40653 = AXIS2_PLACEMENT_3D('',#40654,#40655,#40656); +#40654 = CARTESIAN_POINT('',(2.42560961319,2.11,0.548953137803)); +#40655 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40656 = DIRECTION('',(0.,0.,1.)); +#40657 = ADVANCED_FACE('',(#40658),#40677,.F.); +#40658 = FACE_BOUND('',#40659,.F.); +#40659 = EDGE_LOOP('',(#40660,#40661,#40670,#40676)); +#40660 = ORIENTED_EDGE('',*,*,#39058,.T.); +#40661 = ORIENTED_EDGE('',*,*,#40662,.T.); +#40662 = EDGE_CURVE('',#39051,#40663,#40665,.T.); +#40663 = VERTEX_POINT('',#40664); +#40664 = CARTESIAN_POINT('',(2.348480775301,1.7,0.742364817767)); +#40665 = CIRCLE('',#40666,0.1); +#40666 = AXIS2_PLACEMENT_3D('',#40667,#40668,#40669); +#40667 = CARTESIAN_POINT('',(2.25,1.7,0.725)); +#40668 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40669 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40670 = ORIENTED_EDGE('',*,*,#40671,.F.); +#40671 = EDGE_CURVE('',#40579,#40663,#40672,.T.); +#40672 = LINE('',#40673,#40674); +#40673 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#40674 = VECTOR('',#40675,1.); +#40675 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40676 = ORIENTED_EDGE('',*,*,#40578,.F.); +#40677 = CYLINDRICAL_SURFACE('',#40678,0.1); +#40678 = AXIS2_PLACEMENT_3D('',#40679,#40680,#40681); +#40679 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#40680 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40681 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40682 = ADVANCED_FACE('',(#40683),#40754,.T.); +#40683 = FACE_BOUND('',#40684,.T.); +#40684 = EDGE_LOOP('',(#40685,#40686,#40687,#40688,#40696,#40705,#40713, + #40721,#40729,#40738,#40746,#40753)); +#40685 = ORIENTED_EDGE('',*,*,#39072,.F.); +#40686 = ORIENTED_EDGE('',*,*,#39050,.T.); +#40687 = ORIENTED_EDGE('',*,*,#40662,.T.); +#40688 = ORIENTED_EDGE('',*,*,#40689,.T.); +#40689 = EDGE_CURVE('',#40663,#40690,#40692,.T.); +#40690 = VERTEX_POINT('',#40691); +#40691 = CARTESIAN_POINT('',(2.429496640897,1.7,0.2479055467)); +#40692 = LINE('',#40693,#40694); +#40693 = CARTESIAN_POINT('',(2.348480775301,1.7,0.742364817767)); +#40694 = VECTOR('',#40695,1.); +#40695 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40696 = ORIENTED_EDGE('',*,*,#40697,.T.); +#40697 = EDGE_CURVE('',#40690,#40698,#40700,.T.); +#40698 = VERTEX_POINT('',#40699); +#40699 = CARTESIAN_POINT('',(2.724938966801,1.7,-1.665334536938E-16)); +#40700 = CIRCLE('',#40701,0.3); +#40701 = AXIS2_PLACEMENT_3D('',#40702,#40703,#40704); +#40702 = CARTESIAN_POINT('',(2.724938966801,1.7,0.3)); +#40703 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40704 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40705 = ORIENTED_EDGE('',*,*,#40706,.T.); +#40706 = EDGE_CURVE('',#40698,#40707,#40709,.T.); +#40707 = VERTEX_POINT('',#40708); +#40708 = CARTESIAN_POINT('',(3.,1.7,-1.665334536938E-16)); +#40709 = LINE('',#40710,#40711); +#40710 = CARTESIAN_POINT('',(2.724938966801,1.7,-1.665334536938E-16)); +#40711 = VECTOR('',#40712,1.); +#40712 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40713 = ORIENTED_EDGE('',*,*,#40714,.T.); +#40714 = EDGE_CURVE('',#40707,#40715,#40717,.T.); +#40715 = VERTEX_POINT('',#40716); +#40716 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#40717 = LINE('',#40718,#40719); +#40718 = CARTESIAN_POINT('',(3.,1.7,-1.665334536938E-16)); +#40719 = VECTOR('',#40720,1.); +#40720 = DIRECTION('',(0.,0.,1.)); +#40721 = ORIENTED_EDGE('',*,*,#40722,.T.); +#40722 = EDGE_CURVE('',#40715,#40723,#40725,.T.); +#40723 = VERTEX_POINT('',#40724); +#40724 = CARTESIAN_POINT('',(2.724938966801,1.7,0.2)); +#40725 = LINE('',#40726,#40727); +#40726 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#40727 = VECTOR('',#40728,1.); +#40728 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40729 = ORIENTED_EDGE('',*,*,#40730,.T.); +#40730 = EDGE_CURVE('',#40723,#40731,#40733,.T.); +#40731 = VERTEX_POINT('',#40732); +#40732 = CARTESIAN_POINT('',(2.6264581915,1.7,0.282635182233)); +#40733 = CIRCLE('',#40734,0.1); +#40734 = AXIS2_PLACEMENT_3D('',#40735,#40736,#40737); +#40735 = CARTESIAN_POINT('',(2.724938966801,1.7,0.3)); +#40736 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40737 = DIRECTION('',(0.,0.,-1.)); +#40738 = ORIENTED_EDGE('',*,*,#40739,.T.); +#40739 = EDGE_CURVE('',#40731,#40740,#40742,.T.); +#40740 = VERTEX_POINT('',#40741); +#40741 = CARTESIAN_POINT('',(2.545442325904,1.7,0.7770944533)); +#40742 = LINE('',#40743,#40744); +#40743 = CARTESIAN_POINT('',(2.6264581915,1.7,0.282635182233)); +#40744 = VECTOR('',#40745,1.); +#40745 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40746 = ORIENTED_EDGE('',*,*,#40747,.T.); +#40747 = EDGE_CURVE('',#40740,#39647,#40748,.T.); +#40748 = CIRCLE('',#40749,0.3); +#40749 = AXIS2_PLACEMENT_3D('',#40750,#40751,#40752); +#40750 = CARTESIAN_POINT('',(2.25,1.7,0.725)); +#40751 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40752 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40753 = ORIENTED_EDGE('',*,*,#39654,.T.); +#40754 = PLANE('',#40755); +#40755 = AXIS2_PLACEMENT_3D('',#40756,#40757,#40758); +#40756 = CARTESIAN_POINT('',(2.42560961319,1.7,0.548953137803)); +#40757 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40758 = DIRECTION('',(0.,0.,1.)); +#40759 = ADVANCED_FACE('',(#40760),#40771,.F.); +#40760 = FACE_BOUND('',#40761,.F.); +#40761 = EDGE_LOOP('',(#40762,#40763,#40764,#40770)); +#40762 = ORIENTED_EDGE('',*,*,#39660,.F.); +#40763 = ORIENTED_EDGE('',*,*,#39089,.T.); +#40764 = ORIENTED_EDGE('',*,*,#40765,.T.); +#40765 = EDGE_CURVE('',#39082,#39561,#40766,.T.); +#40766 = LINE('',#40767,#40768); +#40767 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#40768 = VECTOR('',#40769,1.); +#40769 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40770 = ORIENTED_EDGE('',*,*,#39560,.F.); +#40771 = PLANE('',#40772); +#40772 = AXIS2_PLACEMENT_3D('',#40773,#40774,#40775); +#40773 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40774 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40775 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40776 = ADVANCED_FACE('',(#40777),#40863,.F.); +#40777 = FACE_BOUND('',#40778,.F.); +#40778 = EDGE_LOOP('',(#40779,#40780,#40781,#40790,#40798,#40807,#40815, + #40823,#40831,#40840,#40848,#40857)); +#40779 = ORIENTED_EDGE('',*,*,#39081,.F.); +#40780 = ORIENTED_EDGE('',*,*,#39103,.T.); +#40781 = ORIENTED_EDGE('',*,*,#40782,.T.); +#40782 = EDGE_CURVE('',#39104,#40783,#40785,.T.); +#40783 = VERTEX_POINT('',#40784); +#40784 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#40785 = CIRCLE('',#40786,0.1); +#40786 = AXIS2_PLACEMENT_3D('',#40787,#40788,#40789); +#40787 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#40788 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40789 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40790 = ORIENTED_EDGE('',*,*,#40791,.T.); +#40791 = EDGE_CURVE('',#40783,#40792,#40794,.T.); +#40792 = VERTEX_POINT('',#40793); +#40793 = CARTESIAN_POINT('',(2.429496640897,0.84,0.2479055467)); +#40794 = LINE('',#40795,#40796); +#40795 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#40796 = VECTOR('',#40797,1.); +#40797 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40798 = ORIENTED_EDGE('',*,*,#40799,.T.); +#40799 = EDGE_CURVE('',#40792,#40800,#40802,.T.); +#40800 = VERTEX_POINT('',#40801); +#40801 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#40802 = CIRCLE('',#40803,0.3); +#40803 = AXIS2_PLACEMENT_3D('',#40804,#40805,#40806); +#40804 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#40805 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40806 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40807 = ORIENTED_EDGE('',*,*,#40808,.T.); +#40808 = EDGE_CURVE('',#40800,#40809,#40811,.T.); +#40809 = VERTEX_POINT('',#40810); +#40810 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#40811 = LINE('',#40812,#40813); +#40812 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#40813 = VECTOR('',#40814,1.); +#40814 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40815 = ORIENTED_EDGE('',*,*,#40816,.T.); +#40816 = EDGE_CURVE('',#40809,#40817,#40819,.T.); +#40817 = VERTEX_POINT('',#40818); +#40818 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#40819 = LINE('',#40820,#40821); +#40820 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#40821 = VECTOR('',#40822,1.); +#40822 = DIRECTION('',(0.,0.,1.)); +#40823 = ORIENTED_EDGE('',*,*,#40824,.T.); +#40824 = EDGE_CURVE('',#40817,#40825,#40827,.T.); +#40825 = VERTEX_POINT('',#40826); +#40826 = CARTESIAN_POINT('',(2.724938966801,0.84,0.2)); +#40827 = LINE('',#40828,#40829); +#40828 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#40829 = VECTOR('',#40830,1.); +#40830 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40831 = ORIENTED_EDGE('',*,*,#40832,.T.); +#40832 = EDGE_CURVE('',#40825,#40833,#40835,.T.); +#40833 = VERTEX_POINT('',#40834); +#40834 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#40835 = CIRCLE('',#40836,0.1); +#40836 = AXIS2_PLACEMENT_3D('',#40837,#40838,#40839); +#40837 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#40838 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40839 = DIRECTION('',(0.,0.,-1.)); +#40840 = ORIENTED_EDGE('',*,*,#40841,.T.); +#40841 = EDGE_CURVE('',#40833,#40842,#40844,.T.); +#40842 = VERTEX_POINT('',#40843); +#40843 = CARTESIAN_POINT('',(2.545442325904,0.84,0.7770944533)); +#40844 = LINE('',#40845,#40846); +#40845 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#40846 = VECTOR('',#40847,1.); +#40847 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40848 = ORIENTED_EDGE('',*,*,#40849,.T.); +#40849 = EDGE_CURVE('',#40842,#40850,#40852,.T.); +#40850 = VERTEX_POINT('',#40851); +#40851 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#40852 = CIRCLE('',#40853,0.3); +#40853 = AXIS2_PLACEMENT_3D('',#40854,#40855,#40856); +#40854 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#40855 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40856 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40857 = ORIENTED_EDGE('',*,*,#40858,.T.); +#40858 = EDGE_CURVE('',#40850,#39082,#40859,.T.); +#40859 = LINE('',#40860,#40861); +#40860 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#40861 = VECTOR('',#40862,1.); +#40862 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40863 = PLANE('',#40864); +#40864 = AXIS2_PLACEMENT_3D('',#40865,#40866,#40867); +#40865 = CARTESIAN_POINT('',(2.42560961319,0.84,0.548953137803)); +#40866 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40867 = DIRECTION('',(0.,0.,1.)); +#40868 = ADVANCED_FACE('',(#40869),#40888,.F.); +#40869 = FACE_BOUND('',#40870,.F.); +#40870 = EDGE_LOOP('',(#40871,#40872,#40881,#40887)); +#40871 = ORIENTED_EDGE('',*,*,#39120,.T.); +#40872 = ORIENTED_EDGE('',*,*,#40873,.T.); +#40873 = EDGE_CURVE('',#39113,#40874,#40876,.T.); +#40874 = VERTEX_POINT('',#40875); +#40875 = CARTESIAN_POINT('',(2.348480775301,0.43,0.742364817767)); +#40876 = CIRCLE('',#40877,0.1); +#40877 = AXIS2_PLACEMENT_3D('',#40878,#40879,#40880); +#40878 = CARTESIAN_POINT('',(2.25,0.43,0.725)); +#40879 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40880 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40881 = ORIENTED_EDGE('',*,*,#40882,.F.); +#40882 = EDGE_CURVE('',#40783,#40874,#40883,.T.); +#40883 = LINE('',#40884,#40885); +#40884 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#40885 = VECTOR('',#40886,1.); +#40886 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40887 = ORIENTED_EDGE('',*,*,#40782,.F.); +#40888 = CYLINDRICAL_SURFACE('',#40889,0.1); +#40889 = AXIS2_PLACEMENT_3D('',#40890,#40891,#40892); +#40890 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#40891 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40892 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40893 = ADVANCED_FACE('',(#40894),#40972,.T.); +#40894 = FACE_BOUND('',#40895,.T.); +#40895 = EDGE_LOOP('',(#40896,#40897,#40898,#40899,#40907,#40916,#40924, + #40932,#40940,#40949,#40957,#40966)); +#40896 = ORIENTED_EDGE('',*,*,#39134,.F.); +#40897 = ORIENTED_EDGE('',*,*,#39112,.T.); +#40898 = ORIENTED_EDGE('',*,*,#40873,.T.); +#40899 = ORIENTED_EDGE('',*,*,#40900,.T.); +#40900 = EDGE_CURVE('',#40874,#40901,#40903,.T.); +#40901 = VERTEX_POINT('',#40902); +#40902 = CARTESIAN_POINT('',(2.429496640897,0.43,0.2479055467)); +#40903 = LINE('',#40904,#40905); +#40904 = CARTESIAN_POINT('',(2.348480775301,0.43,0.742364817767)); +#40905 = VECTOR('',#40906,1.); +#40906 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40907 = ORIENTED_EDGE('',*,*,#40908,.T.); +#40908 = EDGE_CURVE('',#40901,#40909,#40911,.T.); +#40909 = VERTEX_POINT('',#40910); +#40910 = CARTESIAN_POINT('',(2.724938966801,0.43,-1.665334536938E-16)); +#40911 = CIRCLE('',#40912,0.3); +#40912 = AXIS2_PLACEMENT_3D('',#40913,#40914,#40915); +#40913 = CARTESIAN_POINT('',(2.724938966801,0.43,0.3)); +#40914 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40915 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40916 = ORIENTED_EDGE('',*,*,#40917,.T.); +#40917 = EDGE_CURVE('',#40909,#40918,#40920,.T.); +#40918 = VERTEX_POINT('',#40919); +#40919 = CARTESIAN_POINT('',(3.,0.43,-1.665334536938E-16)); +#40920 = LINE('',#40921,#40922); +#40921 = CARTESIAN_POINT('',(2.724938966801,0.43,-1.665334536938E-16)); +#40922 = VECTOR('',#40923,1.); +#40923 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40924 = ORIENTED_EDGE('',*,*,#40925,.T.); +#40925 = EDGE_CURVE('',#40918,#40926,#40928,.T.); +#40926 = VERTEX_POINT('',#40927); +#40927 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#40928 = LINE('',#40929,#40930); +#40929 = CARTESIAN_POINT('',(3.,0.43,-1.665334536938E-16)); +#40930 = VECTOR('',#40931,1.); +#40931 = DIRECTION('',(0.,0.,1.)); +#40932 = ORIENTED_EDGE('',*,*,#40933,.T.); +#40933 = EDGE_CURVE('',#40926,#40934,#40936,.T.); +#40934 = VERTEX_POINT('',#40935); +#40935 = CARTESIAN_POINT('',(2.724938966801,0.43,0.2)); +#40936 = LINE('',#40937,#40938); +#40937 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#40938 = VECTOR('',#40939,1.); +#40939 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40940 = ORIENTED_EDGE('',*,*,#40941,.T.); +#40941 = EDGE_CURVE('',#40934,#40942,#40944,.T.); +#40942 = VERTEX_POINT('',#40943); +#40943 = CARTESIAN_POINT('',(2.6264581915,0.43,0.282635182233)); +#40944 = CIRCLE('',#40945,0.1); +#40945 = AXIS2_PLACEMENT_3D('',#40946,#40947,#40948); +#40946 = CARTESIAN_POINT('',(2.724938966801,0.43,0.3)); +#40947 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40948 = DIRECTION('',(0.,0.,-1.)); +#40949 = ORIENTED_EDGE('',*,*,#40950,.T.); +#40950 = EDGE_CURVE('',#40942,#40951,#40953,.T.); +#40951 = VERTEX_POINT('',#40952); +#40952 = CARTESIAN_POINT('',(2.545442325904,0.43,0.7770944533)); +#40953 = LINE('',#40954,#40955); +#40954 = CARTESIAN_POINT('',(2.6264581915,0.43,0.282635182233)); +#40955 = VECTOR('',#40956,1.); +#40956 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40957 = ORIENTED_EDGE('',*,*,#40958,.T.); +#40958 = EDGE_CURVE('',#40951,#40959,#40961,.T.); +#40959 = VERTEX_POINT('',#40960); +#40960 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#40961 = CIRCLE('',#40962,0.3); +#40962 = AXIS2_PLACEMENT_3D('',#40963,#40964,#40965); +#40963 = CARTESIAN_POINT('',(2.25,0.43,0.725)); +#40964 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40965 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40966 = ORIENTED_EDGE('',*,*,#40967,.T.); +#40967 = EDGE_CURVE('',#40959,#39135,#40968,.T.); +#40968 = LINE('',#40969,#40970); +#40969 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#40970 = VECTOR('',#40971,1.); +#40971 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40972 = PLANE('',#40973); +#40973 = AXIS2_PLACEMENT_3D('',#40974,#40975,#40976); +#40974 = CARTESIAN_POINT('',(2.42560961319,0.43,0.548953137803)); +#40975 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40976 = DIRECTION('',(0.,0.,1.)); +#40977 = ADVANCED_FACE('',(#40978),#40994,.F.); +#40978 = FACE_BOUND('',#40979,.F.); +#40979 = EDGE_LOOP('',(#40980,#40986,#40987,#40993)); +#40980 = ORIENTED_EDGE('',*,*,#40981,.F.); +#40981 = EDGE_CURVE('',#39135,#39569,#40982,.T.); +#40982 = LINE('',#40983,#40984); +#40983 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#40984 = VECTOR('',#40985,1.); +#40985 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40986 = ORIENTED_EDGE('',*,*,#39151,.T.); +#40987 = ORIENTED_EDGE('',*,*,#40988,.T.); +#40988 = EDGE_CURVE('',#39144,#39577,#40989,.T.); +#40989 = LINE('',#40990,#40991); +#40990 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#40991 = VECTOR('',#40992,1.); +#40992 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40993 = ORIENTED_EDGE('',*,*,#39576,.F.); +#40994 = PLANE('',#40995); +#40995 = AXIS2_PLACEMENT_3D('',#40996,#40997,#40998); +#40996 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40997 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40998 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40999 = ADVANCED_FACE('',(#41000),#41086,.F.); +#41000 = FACE_BOUND('',#41001,.F.); +#41001 = EDGE_LOOP('',(#41002,#41003,#41004,#41013,#41021,#41030,#41038, + #41046,#41054,#41063,#41071,#41080)); +#41002 = ORIENTED_EDGE('',*,*,#39143,.F.); +#41003 = ORIENTED_EDGE('',*,*,#39165,.T.); +#41004 = ORIENTED_EDGE('',*,*,#41005,.T.); +#41005 = EDGE_CURVE('',#39166,#41006,#41008,.T.); +#41006 = VERTEX_POINT('',#41007); +#41007 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#41008 = CIRCLE('',#41009,0.1); +#41009 = AXIS2_PLACEMENT_3D('',#41010,#41011,#41012); +#41010 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#41011 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41012 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41013 = ORIENTED_EDGE('',*,*,#41014,.T.); +#41014 = EDGE_CURVE('',#41006,#41015,#41017,.T.); +#41015 = VERTEX_POINT('',#41016); +#41016 = CARTESIAN_POINT('',(2.429496640897,-0.43,0.2479055467)); +#41017 = LINE('',#41018,#41019); +#41018 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#41019 = VECTOR('',#41020,1.); +#41020 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41021 = ORIENTED_EDGE('',*,*,#41022,.T.); +#41022 = EDGE_CURVE('',#41015,#41023,#41025,.T.); +#41023 = VERTEX_POINT('',#41024); +#41024 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#41025 = CIRCLE('',#41026,0.3); +#41026 = AXIS2_PLACEMENT_3D('',#41027,#41028,#41029); +#41027 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#41028 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41029 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41030 = ORIENTED_EDGE('',*,*,#41031,.T.); +#41031 = EDGE_CURVE('',#41023,#41032,#41034,.T.); +#41032 = VERTEX_POINT('',#41033); +#41033 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#41034 = LINE('',#41035,#41036); +#41035 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#41036 = VECTOR('',#41037,1.); +#41037 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41038 = ORIENTED_EDGE('',*,*,#41039,.T.); +#41039 = EDGE_CURVE('',#41032,#41040,#41042,.T.); +#41040 = VERTEX_POINT('',#41041); +#41041 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#41042 = LINE('',#41043,#41044); +#41043 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#41044 = VECTOR('',#41045,1.); +#41045 = DIRECTION('',(0.,0.,1.)); +#41046 = ORIENTED_EDGE('',*,*,#41047,.T.); +#41047 = EDGE_CURVE('',#41040,#41048,#41050,.T.); +#41048 = VERTEX_POINT('',#41049); +#41049 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.2)); +#41050 = LINE('',#41051,#41052); +#41051 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#41052 = VECTOR('',#41053,1.); +#41053 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41054 = ORIENTED_EDGE('',*,*,#41055,.T.); +#41055 = EDGE_CURVE('',#41048,#41056,#41058,.T.); +#41056 = VERTEX_POINT('',#41057); +#41057 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#41058 = CIRCLE('',#41059,0.1); +#41059 = AXIS2_PLACEMENT_3D('',#41060,#41061,#41062); +#41060 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#41061 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41062 = DIRECTION('',(0.,0.,-1.)); +#41063 = ORIENTED_EDGE('',*,*,#41064,.T.); +#41064 = EDGE_CURVE('',#41056,#41065,#41067,.T.); +#41065 = VERTEX_POINT('',#41066); +#41066 = CARTESIAN_POINT('',(2.545442325904,-0.43,0.7770944533)); +#41067 = LINE('',#41068,#41069); +#41068 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#41069 = VECTOR('',#41070,1.); +#41070 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41071 = ORIENTED_EDGE('',*,*,#41072,.T.); +#41072 = EDGE_CURVE('',#41065,#41073,#41075,.T.); +#41073 = VERTEX_POINT('',#41074); +#41074 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41075 = CIRCLE('',#41076,0.3); +#41076 = AXIS2_PLACEMENT_3D('',#41077,#41078,#41079); +#41077 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#41078 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41079 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41080 = ORIENTED_EDGE('',*,*,#41081,.T.); +#41081 = EDGE_CURVE('',#41073,#39144,#41082,.T.); +#41082 = LINE('',#41083,#41084); +#41083 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41084 = VECTOR('',#41085,1.); +#41085 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41086 = PLANE('',#41087); +#41087 = AXIS2_PLACEMENT_3D('',#41088,#41089,#41090); +#41088 = CARTESIAN_POINT('',(2.42560961319,-0.43,0.548953137803)); +#41089 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41090 = DIRECTION('',(0.,0.,1.)); +#41091 = ADVANCED_FACE('',(#41092),#41111,.F.); +#41092 = FACE_BOUND('',#41093,.F.); +#41093 = EDGE_LOOP('',(#41094,#41095,#41104,#41110)); +#41094 = ORIENTED_EDGE('',*,*,#39182,.T.); +#41095 = ORIENTED_EDGE('',*,*,#41096,.T.); +#41096 = EDGE_CURVE('',#39175,#41097,#41099,.T.); +#41097 = VERTEX_POINT('',#41098); +#41098 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.742364817767)); +#41099 = CIRCLE('',#41100,0.1); +#41100 = AXIS2_PLACEMENT_3D('',#41101,#41102,#41103); +#41101 = CARTESIAN_POINT('',(2.25,-0.84,0.725)); +#41102 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41103 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41104 = ORIENTED_EDGE('',*,*,#41105,.F.); +#41105 = EDGE_CURVE('',#41006,#41097,#41106,.T.); +#41106 = LINE('',#41107,#41108); +#41107 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#41108 = VECTOR('',#41109,1.); +#41109 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41110 = ORIENTED_EDGE('',*,*,#41005,.F.); +#41111 = CYLINDRICAL_SURFACE('',#41112,0.1); +#41112 = AXIS2_PLACEMENT_3D('',#41113,#41114,#41115); +#41113 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#41114 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41115 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41116 = ADVANCED_FACE('',(#41117),#41195,.T.); +#41117 = FACE_BOUND('',#41118,.T.); +#41118 = EDGE_LOOP('',(#41119,#41120,#41121,#41122,#41130,#41139,#41147, + #41155,#41163,#41172,#41180,#41189)); +#41119 = ORIENTED_EDGE('',*,*,#39196,.F.); +#41120 = ORIENTED_EDGE('',*,*,#39174,.T.); +#41121 = ORIENTED_EDGE('',*,*,#41096,.T.); +#41122 = ORIENTED_EDGE('',*,*,#41123,.T.); +#41123 = EDGE_CURVE('',#41097,#41124,#41126,.T.); +#41124 = VERTEX_POINT('',#41125); +#41125 = CARTESIAN_POINT('',(2.429496640897,-0.84,0.2479055467)); +#41126 = LINE('',#41127,#41128); +#41127 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.742364817767)); +#41128 = VECTOR('',#41129,1.); +#41129 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41130 = ORIENTED_EDGE('',*,*,#41131,.T.); +#41131 = EDGE_CURVE('',#41124,#41132,#41134,.T.); +#41132 = VERTEX_POINT('',#41133); +#41133 = CARTESIAN_POINT('',(2.724938966801,-0.84,-1.665334536938E-16)); +#41134 = CIRCLE('',#41135,0.3); +#41135 = AXIS2_PLACEMENT_3D('',#41136,#41137,#41138); +#41136 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.3)); +#41137 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41138 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41139 = ORIENTED_EDGE('',*,*,#41140,.T.); +#41140 = EDGE_CURVE('',#41132,#41141,#41143,.T.); +#41141 = VERTEX_POINT('',#41142); +#41142 = CARTESIAN_POINT('',(3.,-0.84,-1.665334536938E-16)); +#41143 = LINE('',#41144,#41145); +#41144 = CARTESIAN_POINT('',(2.724938966801,-0.84,-1.665334536938E-16)); +#41145 = VECTOR('',#41146,1.); +#41146 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41147 = ORIENTED_EDGE('',*,*,#41148,.T.); +#41148 = EDGE_CURVE('',#41141,#41149,#41151,.T.); +#41149 = VERTEX_POINT('',#41150); +#41150 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#41151 = LINE('',#41152,#41153); +#41152 = CARTESIAN_POINT('',(3.,-0.84,-1.665334536938E-16)); +#41153 = VECTOR('',#41154,1.); +#41154 = DIRECTION('',(0.,0.,1.)); +#41155 = ORIENTED_EDGE('',*,*,#41156,.T.); +#41156 = EDGE_CURVE('',#41149,#41157,#41159,.T.); +#41157 = VERTEX_POINT('',#41158); +#41158 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.2)); +#41159 = LINE('',#41160,#41161); +#41160 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#41161 = VECTOR('',#41162,1.); +#41162 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41163 = ORIENTED_EDGE('',*,*,#41164,.T.); +#41164 = EDGE_CURVE('',#41157,#41165,#41167,.T.); +#41165 = VERTEX_POINT('',#41166); +#41166 = CARTESIAN_POINT('',(2.6264581915,-0.84,0.282635182233)); +#41167 = CIRCLE('',#41168,0.1); +#41168 = AXIS2_PLACEMENT_3D('',#41169,#41170,#41171); +#41169 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.3)); +#41170 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41171 = DIRECTION('',(0.,0.,-1.)); +#41172 = ORIENTED_EDGE('',*,*,#41173,.T.); +#41173 = EDGE_CURVE('',#41165,#41174,#41176,.T.); +#41174 = VERTEX_POINT('',#41175); +#41175 = CARTESIAN_POINT('',(2.545442325904,-0.84,0.7770944533)); +#41176 = LINE('',#41177,#41178); +#41177 = CARTESIAN_POINT('',(2.6264581915,-0.84,0.282635182233)); +#41178 = VECTOR('',#41179,1.); +#41179 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41180 = ORIENTED_EDGE('',*,*,#41181,.T.); +#41181 = EDGE_CURVE('',#41174,#41182,#41184,.T.); +#41182 = VERTEX_POINT('',#41183); +#41183 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#41184 = CIRCLE('',#41185,0.3); +#41185 = AXIS2_PLACEMENT_3D('',#41186,#41187,#41188); +#41186 = CARTESIAN_POINT('',(2.25,-0.84,0.725)); +#41187 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41188 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41189 = ORIENTED_EDGE('',*,*,#41190,.T.); +#41190 = EDGE_CURVE('',#41182,#39197,#41191,.T.); +#41191 = LINE('',#41192,#41193); +#41192 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#41193 = VECTOR('',#41194,1.); +#41194 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41195 = PLANE('',#41196); +#41196 = AXIS2_PLACEMENT_3D('',#41197,#41198,#41199); +#41197 = CARTESIAN_POINT('',(2.42560961319,-0.84,0.548953137803)); +#41198 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41199 = DIRECTION('',(0.,0.,1.)); +#41200 = ADVANCED_FACE('',(#41201),#41217,.F.); +#41201 = FACE_BOUND('',#41202,.F.); +#41202 = EDGE_LOOP('',(#41203,#41209,#41210,#41216)); +#41203 = ORIENTED_EDGE('',*,*,#41204,.F.); +#41204 = EDGE_CURVE('',#39197,#39585,#41205,.T.); +#41205 = LINE('',#41206,#41207); +#41206 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#41207 = VECTOR('',#41208,1.); +#41208 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41209 = ORIENTED_EDGE('',*,*,#39213,.T.); +#41210 = ORIENTED_EDGE('',*,*,#41211,.T.); +#41211 = EDGE_CURVE('',#39206,#39593,#41212,.T.); +#41212 = LINE('',#41213,#41214); +#41213 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41214 = VECTOR('',#41215,1.); +#41215 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41216 = ORIENTED_EDGE('',*,*,#39592,.F.); +#41217 = PLANE('',#41218); +#41218 = AXIS2_PLACEMENT_3D('',#41219,#41220,#41221); +#41219 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#41220 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#41221 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#41222 = ADVANCED_FACE('',(#41223),#41309,.F.); +#41223 = FACE_BOUND('',#41224,.F.); +#41224 = EDGE_LOOP('',(#41225,#41226,#41227,#41236,#41244,#41253,#41261, + #41269,#41277,#41286,#41294,#41303)); +#41225 = ORIENTED_EDGE('',*,*,#39205,.F.); +#41226 = ORIENTED_EDGE('',*,*,#39227,.T.); +#41227 = ORIENTED_EDGE('',*,*,#41228,.T.); +#41228 = EDGE_CURVE('',#39228,#41229,#41231,.T.); +#41229 = VERTEX_POINT('',#41230); +#41230 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#41231 = CIRCLE('',#41232,0.1); +#41232 = AXIS2_PLACEMENT_3D('',#41233,#41234,#41235); +#41233 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#41234 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41235 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41236 = ORIENTED_EDGE('',*,*,#41237,.T.); +#41237 = EDGE_CURVE('',#41229,#41238,#41240,.T.); +#41238 = VERTEX_POINT('',#41239); +#41239 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467)); +#41240 = LINE('',#41241,#41242); +#41241 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#41242 = VECTOR('',#41243,1.); +#41243 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41244 = ORIENTED_EDGE('',*,*,#41245,.T.); +#41245 = EDGE_CURVE('',#41238,#41246,#41248,.T.); +#41246 = VERTEX_POINT('',#41247); +#41247 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#41248 = CIRCLE('',#41249,0.3); +#41249 = AXIS2_PLACEMENT_3D('',#41250,#41251,#41252); +#41250 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#41251 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41252 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41253 = ORIENTED_EDGE('',*,*,#41254,.T.); +#41254 = EDGE_CURVE('',#41246,#41255,#41257,.T.); +#41255 = VERTEX_POINT('',#41256); +#41256 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#41257 = LINE('',#41258,#41259); +#41258 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#41259 = VECTOR('',#41260,1.); +#41260 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41261 = ORIENTED_EDGE('',*,*,#41262,.T.); +#41262 = EDGE_CURVE('',#41255,#41263,#41265,.T.); +#41263 = VERTEX_POINT('',#41264); +#41264 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#41265 = LINE('',#41266,#41267); +#41266 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#41267 = VECTOR('',#41268,1.); +#41268 = DIRECTION('',(0.,0.,1.)); +#41269 = ORIENTED_EDGE('',*,*,#41270,.T.); +#41270 = EDGE_CURVE('',#41263,#41271,#41273,.T.); +#41271 = VERTEX_POINT('',#41272); +#41272 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2)); +#41273 = LINE('',#41274,#41275); +#41274 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#41275 = VECTOR('',#41276,1.); +#41276 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41277 = ORIENTED_EDGE('',*,*,#41278,.T.); +#41278 = EDGE_CURVE('',#41271,#41279,#41281,.T.); +#41279 = VERTEX_POINT('',#41280); +#41280 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#41281 = CIRCLE('',#41282,0.1); +#41282 = AXIS2_PLACEMENT_3D('',#41283,#41284,#41285); +#41283 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#41284 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41285 = DIRECTION('',(0.,0.,-1.)); +#41286 = ORIENTED_EDGE('',*,*,#41287,.T.); +#41287 = EDGE_CURVE('',#41279,#41288,#41290,.T.); +#41288 = VERTEX_POINT('',#41289); +#41289 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533)); +#41290 = LINE('',#41291,#41292); +#41291 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#41292 = VECTOR('',#41293,1.); +#41293 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41294 = ORIENTED_EDGE('',*,*,#41295,.T.); +#41295 = EDGE_CURVE('',#41288,#41296,#41298,.T.); +#41296 = VERTEX_POINT('',#41297); +#41297 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41298 = CIRCLE('',#41299,0.3); +#41299 = AXIS2_PLACEMENT_3D('',#41300,#41301,#41302); +#41300 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#41301 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41302 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41303 = ORIENTED_EDGE('',*,*,#41304,.T.); +#41304 = EDGE_CURVE('',#41296,#39206,#41305,.T.); +#41305 = LINE('',#41306,#41307); +#41306 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41307 = VECTOR('',#41308,1.); +#41308 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41309 = PLANE('',#41310); +#41310 = AXIS2_PLACEMENT_3D('',#41311,#41312,#41313); +#41311 = CARTESIAN_POINT('',(2.42560961319,-1.7,0.548953137803)); +#41312 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41313 = DIRECTION('',(0.,0.,1.)); +#41314 = ADVANCED_FACE('',(#41315),#41334,.F.); +#41315 = FACE_BOUND('',#41316,.F.); +#41316 = EDGE_LOOP('',(#41317,#41318,#41327,#41333)); +#41317 = ORIENTED_EDGE('',*,*,#39244,.T.); +#41318 = ORIENTED_EDGE('',*,*,#41319,.T.); +#41319 = EDGE_CURVE('',#39237,#41320,#41322,.T.); +#41320 = VERTEX_POINT('',#41321); +#41321 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767)); +#41322 = CIRCLE('',#41323,0.1); +#41323 = AXIS2_PLACEMENT_3D('',#41324,#41325,#41326); +#41324 = CARTESIAN_POINT('',(2.25,-2.11,0.725)); +#41325 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41326 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41327 = ORIENTED_EDGE('',*,*,#41328,.F.); +#41328 = EDGE_CURVE('',#41229,#41320,#41329,.T.); +#41329 = LINE('',#41330,#41331); +#41330 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#41331 = VECTOR('',#41332,1.); +#41332 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41333 = ORIENTED_EDGE('',*,*,#41228,.F.); +#41334 = CYLINDRICAL_SURFACE('',#41335,0.1); +#41335 = AXIS2_PLACEMENT_3D('',#41336,#41337,#41338); +#41336 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#41337 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41338 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41339 = ADVANCED_FACE('',(#41340),#41418,.T.); +#41340 = FACE_BOUND('',#41341,.T.); +#41341 = EDGE_LOOP('',(#41342,#41343,#41344,#41345,#41353,#41362,#41370, + #41378,#41386,#41395,#41403,#41412)); +#41342 = ORIENTED_EDGE('',*,*,#39258,.F.); +#41343 = ORIENTED_EDGE('',*,*,#39236,.T.); +#41344 = ORIENTED_EDGE('',*,*,#41319,.T.); +#41345 = ORIENTED_EDGE('',*,*,#41346,.T.); +#41346 = EDGE_CURVE('',#41320,#41347,#41349,.T.); +#41347 = VERTEX_POINT('',#41348); +#41348 = CARTESIAN_POINT('',(2.429496640897,-2.11,0.2479055467)); +#41349 = LINE('',#41350,#41351); +#41350 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767)); +#41351 = VECTOR('',#41352,1.); +#41352 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41353 = ORIENTED_EDGE('',*,*,#41354,.T.); +#41354 = EDGE_CURVE('',#41347,#41355,#41357,.T.); +#41355 = VERTEX_POINT('',#41356); +#41356 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16)); +#41357 = CIRCLE('',#41358,0.3); +#41358 = AXIS2_PLACEMENT_3D('',#41359,#41360,#41361); +#41359 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3)); +#41360 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41361 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41362 = ORIENTED_EDGE('',*,*,#41363,.T.); +#41363 = EDGE_CURVE('',#41355,#41364,#41366,.T.); +#41364 = VERTEX_POINT('',#41365); +#41365 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16)); +#41366 = LINE('',#41367,#41368); +#41367 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16)); +#41368 = VECTOR('',#41369,1.); +#41369 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41370 = ORIENTED_EDGE('',*,*,#41371,.T.); +#41371 = EDGE_CURVE('',#41364,#41372,#41374,.T.); +#41372 = VERTEX_POINT('',#41373); +#41373 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#41374 = LINE('',#41375,#41376); +#41375 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16)); +#41376 = VECTOR('',#41377,1.); +#41377 = DIRECTION('',(0.,0.,1.)); +#41378 = ORIENTED_EDGE('',*,*,#41379,.T.); +#41379 = EDGE_CURVE('',#41372,#41380,#41382,.T.); +#41380 = VERTEX_POINT('',#41381); +#41381 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.2)); +#41382 = LINE('',#41383,#41384); +#41383 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#41384 = VECTOR('',#41385,1.); +#41385 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41386 = ORIENTED_EDGE('',*,*,#41387,.T.); +#41387 = EDGE_CURVE('',#41380,#41388,#41390,.T.); +#41388 = VERTEX_POINT('',#41389); +#41389 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233)); +#41390 = CIRCLE('',#41391,0.1); +#41391 = AXIS2_PLACEMENT_3D('',#41392,#41393,#41394); +#41392 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3)); +#41393 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41394 = DIRECTION('',(0.,0.,-1.)); +#41395 = ORIENTED_EDGE('',*,*,#41396,.T.); +#41396 = EDGE_CURVE('',#41388,#41397,#41399,.T.); +#41397 = VERTEX_POINT('',#41398); +#41398 = CARTESIAN_POINT('',(2.545442325904,-2.11,0.7770944533)); +#41399 = LINE('',#41400,#41401); +#41400 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233)); +#41401 = VECTOR('',#41402,1.); +#41402 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41403 = ORIENTED_EDGE('',*,*,#41404,.T.); +#41404 = EDGE_CURVE('',#41397,#41405,#41407,.T.); +#41405 = VERTEX_POINT('',#41406); +#41406 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#41407 = CIRCLE('',#41408,0.3); +#41408 = AXIS2_PLACEMENT_3D('',#41409,#41410,#41411); +#41409 = CARTESIAN_POINT('',(2.25,-2.11,0.725)); +#41410 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41411 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41412 = ORIENTED_EDGE('',*,*,#41413,.T.); +#41413 = EDGE_CURVE('',#41405,#39259,#41414,.T.); +#41414 = LINE('',#41415,#41416); +#41415 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#41416 = VECTOR('',#41417,1.); +#41417 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41418 = PLANE('',#41419); +#41419 = AXIS2_PLACEMENT_3D('',#41420,#41421,#41422); +#41420 = CARTESIAN_POINT('',(2.42560961319,-2.11,0.548953137803)); +#41421 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41422 = DIRECTION('',(0.,0.,1.)); +#41423 = ADVANCED_FACE('',(#41424),#41435,.T.); +#41424 = FACE_BOUND('',#41425,.T.); +#41425 = EDGE_LOOP('',(#41426,#41427,#41428,#41429)); +#41426 = ORIENTED_EDGE('',*,*,#40458,.T.); +#41427 = ORIENTED_EDGE('',*,*,#39359,.T.); +#41428 = ORIENTED_EDGE('',*,*,#40560,.F.); +#41429 = ORIENTED_EDGE('',*,*,#41430,.F.); +#41430 = EDGE_CURVE('',#40451,#40553,#41431,.T.); +#41431 = LINE('',#41432,#41433); +#41432 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533)); +#41433 = VECTOR('',#41434,1.); +#41434 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41435 = CYLINDRICAL_SURFACE('',#41436,0.3); +#41436 = AXIS2_PLACEMENT_3D('',#41437,#41438,#41439); +#41437 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#41438 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41439 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41440 = ADVANCED_FACE('',(#41441),#41454,.F.); +#41441 = FACE_BOUND('',#41442,.F.); +#41442 = EDGE_LOOP('',(#41443,#41444,#41450,#41451,#41452,#41453)); +#41443 = ORIENTED_EDGE('',*,*,#39803,.F.); +#41444 = ORIENTED_EDGE('',*,*,#41445,.T.); +#41445 = EDGE_CURVE('',#39795,#39904,#41446,.T.); +#41446 = LINE('',#41447,#41448); +#41447 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#41448 = VECTOR('',#41449,1.); +#41449 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41450 = ORIENTED_EDGE('',*,*,#39912,.T.); +#41451 = ORIENTED_EDGE('',*,*,#39934,.T.); +#41452 = ORIENTED_EDGE('',*,*,#39406,.F.); +#41453 = ORIENTED_EDGE('',*,*,#39677,.F.); +#41454 = PLANE('',#41455); +#41455 = AXIS2_PLACEMENT_3D('',#41456,#41457,#41458); +#41456 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#41457 = DIRECTION('',(0.,0.,-1.)); +#41458 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41459 = ADVANCED_FACE('',(#41460),#41473,.F.); +#41460 = FACE_BOUND('',#41461,.F.); +#41461 = EDGE_LOOP('',(#41462,#41463,#41469,#41470,#41471,#41472)); +#41462 = ORIENTED_EDGE('',*,*,#40026,.F.); +#41463 = ORIENTED_EDGE('',*,*,#41464,.T.); +#41464 = EDGE_CURVE('',#40018,#40127,#41465,.T.); +#41465 = LINE('',#41466,#41467); +#41466 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#41467 = VECTOR('',#41468,1.); +#41468 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41469 = ORIENTED_EDGE('',*,*,#40135,.T.); +#41470 = ORIENTED_EDGE('',*,*,#40157,.T.); +#41471 = ORIENTED_EDGE('',*,*,#39422,.F.); +#41472 = ORIENTED_EDGE('',*,*,#39927,.F.); +#41473 = PLANE('',#41474); +#41474 = AXIS2_PLACEMENT_3D('',#41475,#41476,#41477); +#41475 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#41476 = DIRECTION('',(0.,0.,-1.)); +#41477 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41478 = ADVANCED_FACE('',(#41479),#41492,.F.); +#41479 = FACE_BOUND('',#41480,.F.); +#41480 = EDGE_LOOP('',(#41481,#41482,#41488,#41489,#41490,#41491)); +#41481 = ORIENTED_EDGE('',*,*,#40249,.F.); +#41482 = ORIENTED_EDGE('',*,*,#41483,.T.); +#41483 = EDGE_CURVE('',#40241,#40350,#41484,.T.); +#41484 = LINE('',#41485,#41486); +#41485 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#41486 = VECTOR('',#41487,1.); +#41487 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41488 = ORIENTED_EDGE('',*,*,#40358,.T.); +#41489 = ORIENTED_EDGE('',*,*,#40375,.T.); +#41490 = ORIENTED_EDGE('',*,*,#39438,.F.); +#41491 = ORIENTED_EDGE('',*,*,#40150,.F.); +#41492 = PLANE('',#41493); +#41493 = AXIS2_PLACEMENT_3D('',#41494,#41495,#41496); +#41494 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#41495 = DIRECTION('',(0.,0.,-1.)); +#41496 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41497 = ADVANCED_FACE('',(#41498,#41527),#41538,.F.); +#41498 = FACE_BOUND('',#41499,.F.); +#41499 = EDGE_LOOP('',(#41500,#41501,#41502,#41503,#41511,#41519,#41525, + #41526)); +#41500 = ORIENTED_EDGE('',*,*,#39513,.T.); +#41501 = ORIENTED_EDGE('',*,*,#39536,.T.); +#41502 = ORIENTED_EDGE('',*,*,#39623,.T.); +#41503 = ORIENTED_EDGE('',*,*,#41504,.T.); +#41504 = EDGE_CURVE('',#39617,#41505,#41507,.T.); +#41505 = VERTEX_POINT('',#41506); +#41506 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41507 = LINE('',#41508,#41509); +#41508 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#41509 = VECTOR('',#41510,1.); +#41510 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#41511 = ORIENTED_EDGE('',*,*,#41512,.T.); +#41512 = EDGE_CURVE('',#41505,#41513,#41515,.T.); +#41513 = VERTEX_POINT('',#41514); +#41514 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41515 = LINE('',#41516,#41517); +#41516 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41517 = VECTOR('',#41518,1.); +#41518 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41519 = ORIENTED_EDGE('',*,*,#41520,.T.); +#41520 = EDGE_CURVE('',#41513,#39462,#41521,.T.); +#41521 = LINE('',#41522,#41523); +#41522 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41523 = VECTOR('',#41524,1.); +#41524 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#41525 = ORIENTED_EDGE('',*,*,#39461,.T.); +#41526 = ORIENTED_EDGE('',*,*,#39490,.T.); +#41527 = FACE_BOUND('',#41528,.F.); +#41528 = EDGE_LOOP('',(#41529)); +#41529 = ORIENTED_EDGE('',*,*,#41530,.F.); +#41530 = EDGE_CURVE('',#41531,#41531,#41533,.T.); +#41531 = VERTEX_POINT('',#41532); +#41532 = CARTESIAN_POINT('',(-1.110171280765,1.310171280765,1.75)); +#41533 = CIRCLE('',#41534,0.3); +#41534 = AXIS2_PLACEMENT_3D('',#41535,#41536,#41537); +#41535 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.75)); +#41536 = DIRECTION('',(0.,-0.,-1.)); +#41537 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41538 = PLANE('',#41539); +#41539 = AXIS2_PLACEMENT_3D('',#41540,#41541,#41542); +#41540 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#41541 = DIRECTION('',(0.,0.,-1.)); +#41542 = DIRECTION('',(0.596575959062,-0.802556617983,0.)); +#41543 = ADVANCED_FACE('',(#41544),#41554,.F.); +#41544 = FACE_BOUND('',#41545,.F.); +#41545 = EDGE_LOOP('',(#41546,#41547,#41548,#41549)); +#41546 = ORIENTED_EDGE('',*,*,#39684,.T.); +#41547 = ORIENTED_EDGE('',*,*,#39469,.T.); +#41548 = ORIENTED_EDGE('',*,*,#41520,.F.); +#41549 = ORIENTED_EDGE('',*,*,#41550,.F.); +#41550 = EDGE_CURVE('',#39685,#41513,#41551,.T.); +#41551 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#41552,#41553),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#41552 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#41553 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41554 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#41555,#41556) + ,(#41557,#41558 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#41555 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#41556 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41557 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#41558 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#41559 = ADVANCED_FACE('',(#41560),#41573,.F.); +#41560 = FACE_BOUND('',#41561,.F.); +#41561 = EDGE_LOOP('',(#41562,#41563,#41569,#41570,#41571,#41572)); +#41562 = ORIENTED_EDGE('',*,*,#40858,.F.); +#41563 = ORIENTED_EDGE('',*,*,#41564,.T.); +#41564 = EDGE_CURVE('',#40850,#40959,#41565,.T.); +#41565 = LINE('',#41566,#41567); +#41566 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#41567 = VECTOR('',#41568,1.); +#41568 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41569 = ORIENTED_EDGE('',*,*,#40967,.T.); +#41570 = ORIENTED_EDGE('',*,*,#40981,.T.); +#41571 = ORIENTED_EDGE('',*,*,#39568,.F.); +#41572 = ORIENTED_EDGE('',*,*,#40765,.F.); +#41573 = PLANE('',#41574); +#41574 = AXIS2_PLACEMENT_3D('',#41575,#41576,#41577); +#41575 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#41576 = DIRECTION('',(0.,0.,-1.)); +#41577 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#41578 = ADVANCED_FACE('',(#41579),#41592,.F.); +#41579 = FACE_BOUND('',#41580,.F.); +#41580 = EDGE_LOOP('',(#41581,#41582,#41588,#41589,#41590,#41591)); +#41581 = ORIENTED_EDGE('',*,*,#41081,.F.); +#41582 = ORIENTED_EDGE('',*,*,#41583,.T.); +#41583 = EDGE_CURVE('',#41073,#41182,#41584,.T.); +#41584 = LINE('',#41585,#41586); +#41585 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41586 = VECTOR('',#41587,1.); +#41587 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41588 = ORIENTED_EDGE('',*,*,#41190,.T.); +#41589 = ORIENTED_EDGE('',*,*,#41204,.T.); +#41590 = ORIENTED_EDGE('',*,*,#39584,.F.); +#41591 = ORIENTED_EDGE('',*,*,#40988,.F.); +#41592 = PLANE('',#41593); +#41593 = AXIS2_PLACEMENT_3D('',#41594,#41595,#41596); +#41594 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41595 = DIRECTION('',(0.,0.,-1.)); +#41596 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#41597 = ADVANCED_FACE('',(#41598),#41611,.F.); +#41598 = FACE_BOUND('',#41599,.F.); +#41599 = EDGE_LOOP('',(#41600,#41601,#41607,#41608,#41609,#41610)); +#41600 = ORIENTED_EDGE('',*,*,#41304,.F.); +#41601 = ORIENTED_EDGE('',*,*,#41602,.T.); +#41602 = EDGE_CURVE('',#41296,#41405,#41603,.T.); +#41603 = LINE('',#41604,#41605); +#41604 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41605 = VECTOR('',#41606,1.); +#41606 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41607 = ORIENTED_EDGE('',*,*,#41413,.T.); +#41608 = ORIENTED_EDGE('',*,*,#39707,.T.); +#41609 = ORIENTED_EDGE('',*,*,#39600,.F.); +#41610 = ORIENTED_EDGE('',*,*,#41211,.F.); +#41611 = PLANE('',#41612); +#41612 = AXIS2_PLACEMENT_3D('',#41613,#41614,#41615); +#41613 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41614 = DIRECTION('',(0.,0.,-1.)); +#41615 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#41616 = ADVANCED_FACE('',(#41617),#41627,.F.); +#41617 = FACE_BOUND('',#41618,.F.); +#41618 = EDGE_LOOP('',(#41619,#41620,#41625,#41626)); +#41619 = ORIENTED_EDGE('',*,*,#39700,.T.); +#41620 = ORIENTED_EDGE('',*,*,#41621,.T.); +#41621 = EDGE_CURVE('',#39693,#41505,#41622,.T.); +#41622 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#41623,#41624),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#41623 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#41624 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41625 = ORIENTED_EDGE('',*,*,#41504,.F.); +#41626 = ORIENTED_EDGE('',*,*,#39616,.F.); +#41627 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#41628,#41629) + ,(#41630,#41631 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#41628 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#41629 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#41630 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#41631 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41632 = ADVANCED_FACE('',(#41633),#41644,.T.); +#41633 = FACE_BOUND('',#41634,.T.); +#41634 = EDGE_LOOP('',(#41635,#41636,#41637,#41638)); +#41635 = ORIENTED_EDGE('',*,*,#40645,.T.); +#41636 = ORIENTED_EDGE('',*,*,#39646,.T.); +#41637 = ORIENTED_EDGE('',*,*,#40747,.F.); +#41638 = ORIENTED_EDGE('',*,*,#41639,.F.); +#41639 = EDGE_CURVE('',#40638,#40740,#41640,.T.); +#41640 = LINE('',#41641,#41642); +#41641 = CARTESIAN_POINT('',(2.545442325904,2.11,0.7770944533)); +#41642 = VECTOR('',#41643,1.); +#41643 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41644 = CYLINDRICAL_SURFACE('',#41645,0.3); +#41645 = AXIS2_PLACEMENT_3D('',#41646,#41647,#41648); +#41646 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#41647 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41648 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41649 = ADVANCED_FACE('',(#41650),#41656,.F.); +#41650 = FACE_BOUND('',#41651,.F.); +#41651 = EDGE_LOOP('',(#41652,#41653,#41654,#41655)); +#41652 = ORIENTED_EDGE('',*,*,#39692,.T.); +#41653 = ORIENTED_EDGE('',*,*,#41550,.T.); +#41654 = ORIENTED_EDGE('',*,*,#41512,.F.); +#41655 = ORIENTED_EDGE('',*,*,#41621,.F.); +#41656 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#41657,#41658) + ,(#41659,#41660 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#41657 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#41658 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41659 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#41660 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41661 = ADVANCED_FACE('',(#41662),#41673,.T.); +#41662 = FACE_BOUND('',#41663,.T.); +#41663 = EDGE_LOOP('',(#41664,#41665,#41666,#41667)); +#41664 = ORIENTED_EDGE('',*,*,#39794,.T.); +#41665 = ORIENTED_EDGE('',*,*,#41445,.T.); +#41666 = ORIENTED_EDGE('',*,*,#39903,.F.); +#41667 = ORIENTED_EDGE('',*,*,#41668,.F.); +#41668 = EDGE_CURVE('',#39787,#39896,#41669,.T.); +#41669 = LINE('',#41670,#41671); +#41670 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533)); +#41671 = VECTOR('',#41672,1.); +#41672 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41673 = CYLINDRICAL_SURFACE('',#41674,0.3); +#41674 = AXIS2_PLACEMENT_3D('',#41675,#41676,#41677); +#41675 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#41676 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41677 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41678 = ADVANCED_FACE('',(#41679),#41690,.F.); +#41679 = FACE_BOUND('',#41680,.F.); +#41680 = EDGE_LOOP('',(#41681,#41687,#41688,#41689)); +#41681 = ORIENTED_EDGE('',*,*,#41682,.T.); +#41682 = EDGE_CURVE('',#39778,#39887,#41683,.T.); +#41683 = LINE('',#41684,#41685); +#41684 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#41685 = VECTOR('',#41686,1.); +#41686 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41687 = ORIENTED_EDGE('',*,*,#39895,.T.); +#41688 = ORIENTED_EDGE('',*,*,#41668,.F.); +#41689 = ORIENTED_EDGE('',*,*,#39786,.F.); +#41690 = PLANE('',#41691); +#41691 = AXIS2_PLACEMENT_3D('',#41692,#41693,#41694); +#41692 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#41693 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#41694 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#41695 = ADVANCED_FACE('',(#41696),#41707,.F.); +#41696 = FACE_BOUND('',#41697,.F.); +#41697 = EDGE_LOOP('',(#41698,#41704,#41705,#41706)); +#41698 = ORIENTED_EDGE('',*,*,#41699,.T.); +#41699 = EDGE_CURVE('',#39770,#39879,#41700,.T.); +#41700 = LINE('',#41701,#41702); +#41701 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2)); +#41702 = VECTOR('',#41703,1.); +#41703 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41704 = ORIENTED_EDGE('',*,*,#39886,.T.); +#41705 = ORIENTED_EDGE('',*,*,#41682,.F.); +#41706 = ORIENTED_EDGE('',*,*,#39777,.F.); +#41707 = CYLINDRICAL_SURFACE('',#41708,0.1); +#41708 = AXIS2_PLACEMENT_3D('',#41709,#41710,#41711); +#41709 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#41710 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41711 = DIRECTION('',(-0.,0.,-1.)); +#41712 = ADVANCED_FACE('',(#41713),#41724,.F.); +#41713 = FACE_BOUND('',#41714,.F.); +#41714 = EDGE_LOOP('',(#41715,#41721,#41722,#41723)); +#41715 = ORIENTED_EDGE('',*,*,#41716,.T.); +#41716 = EDGE_CURVE('',#39762,#39871,#41717,.T.); +#41717 = LINE('',#41718,#41719); +#41718 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#41719 = VECTOR('',#41720,1.); +#41720 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41721 = ORIENTED_EDGE('',*,*,#39878,.T.); +#41722 = ORIENTED_EDGE('',*,*,#41699,.F.); +#41723 = ORIENTED_EDGE('',*,*,#39769,.F.); +#41724 = PLANE('',#41725); +#41725 = AXIS2_PLACEMENT_3D('',#41726,#41727,#41728); +#41726 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#41727 = DIRECTION('',(0.,0.,-1.)); +#41728 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41729 = ADVANCED_FACE('',(#41730),#41741,.F.); +#41730 = FACE_BOUND('',#41731,.F.); +#41731 = EDGE_LOOP('',(#41732,#41738,#41739,#41740)); +#41732 = ORIENTED_EDGE('',*,*,#41733,.T.); +#41733 = EDGE_CURVE('',#39754,#39863,#41734,.T.); +#41734 = LINE('',#41735,#41736); +#41735 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#41736 = VECTOR('',#41737,1.); +#41737 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41738 = ORIENTED_EDGE('',*,*,#39870,.T.); +#41739 = ORIENTED_EDGE('',*,*,#41716,.F.); +#41740 = ORIENTED_EDGE('',*,*,#39761,.F.); +#41741 = PLANE('',#41742); +#41742 = AXIS2_PLACEMENT_3D('',#41743,#41744,#41745); +#41743 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#41744 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41745 = DIRECTION('',(0.,0.,1.)); +#41746 = ADVANCED_FACE('',(#41747),#41758,.F.); +#41747 = FACE_BOUND('',#41748,.F.); +#41748 = EDGE_LOOP('',(#41749,#41755,#41756,#41757)); +#41749 = ORIENTED_EDGE('',*,*,#41750,.T.); +#41750 = EDGE_CURVE('',#39745,#39854,#41751,.T.); +#41751 = LINE('',#41752,#41753); +#41752 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#41753 = VECTOR('',#41754,1.); +#41754 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41755 = ORIENTED_EDGE('',*,*,#39862,.T.); +#41756 = ORIENTED_EDGE('',*,*,#41733,.F.); +#41757 = ORIENTED_EDGE('',*,*,#39753,.F.); +#41758 = PLANE('',#41759); +#41759 = AXIS2_PLACEMENT_3D('',#41760,#41761,#41762); +#41760 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#41761 = DIRECTION('',(0.,0.,1.)); +#41762 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#41763 = ADVANCED_FACE('',(#41764),#41775,.T.); +#41764 = FACE_BOUND('',#41765,.T.); +#41765 = EDGE_LOOP('',(#41766,#41767,#41768,#41769)); +#41766 = ORIENTED_EDGE('',*,*,#39744,.T.); +#41767 = ORIENTED_EDGE('',*,*,#41750,.T.); +#41768 = ORIENTED_EDGE('',*,*,#39853,.F.); +#41769 = ORIENTED_EDGE('',*,*,#41770,.F.); +#41770 = EDGE_CURVE('',#39737,#39846,#41771,.T.); +#41771 = LINE('',#41772,#41773); +#41772 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467)); +#41773 = VECTOR('',#41774,1.); +#41774 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41775 = CYLINDRICAL_SURFACE('',#41776,0.3); +#41776 = AXIS2_PLACEMENT_3D('',#41777,#41778,#41779); +#41777 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#41778 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41779 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#41780 = ADVANCED_FACE('',(#41781),#41787,.F.); +#41781 = FACE_BOUND('',#41782,.F.); +#41782 = EDGE_LOOP('',(#41783,#41784,#41785,#41786)); +#41783 = ORIENTED_EDGE('',*,*,#39827,.T.); +#41784 = ORIENTED_EDGE('',*,*,#39845,.T.); +#41785 = ORIENTED_EDGE('',*,*,#41770,.F.); +#41786 = ORIENTED_EDGE('',*,*,#39736,.F.); +#41787 = PLANE('',#41788); +#41788 = AXIS2_PLACEMENT_3D('',#41789,#41790,#41791); +#41789 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#41790 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#41791 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#41792 = ADVANCED_FACE('',(#41793),#41804,.T.); +#41793 = FACE_BOUND('',#41794,.T.); +#41794 = EDGE_LOOP('',(#41795,#41796,#41797,#41798)); +#41795 = ORIENTED_EDGE('',*,*,#40017,.T.); +#41796 = ORIENTED_EDGE('',*,*,#41464,.T.); +#41797 = ORIENTED_EDGE('',*,*,#40126,.F.); +#41798 = ORIENTED_EDGE('',*,*,#41799,.F.); +#41799 = EDGE_CURVE('',#40010,#40119,#41800,.T.); +#41800 = LINE('',#41801,#41802); +#41801 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533)); +#41802 = VECTOR('',#41803,1.); +#41803 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41804 = CYLINDRICAL_SURFACE('',#41805,0.3); +#41805 = AXIS2_PLACEMENT_3D('',#41806,#41807,#41808); +#41806 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#41807 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41808 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41809 = ADVANCED_FACE('',(#41810),#41821,.F.); +#41810 = FACE_BOUND('',#41811,.F.); +#41811 = EDGE_LOOP('',(#41812,#41818,#41819,#41820)); +#41812 = ORIENTED_EDGE('',*,*,#41813,.T.); +#41813 = EDGE_CURVE('',#40001,#40110,#41814,.T.); +#41814 = LINE('',#41815,#41816); +#41815 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#41816 = VECTOR('',#41817,1.); +#41817 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41818 = ORIENTED_EDGE('',*,*,#40118,.T.); +#41819 = ORIENTED_EDGE('',*,*,#41799,.F.); +#41820 = ORIENTED_EDGE('',*,*,#40009,.F.); +#41821 = PLANE('',#41822); +#41822 = AXIS2_PLACEMENT_3D('',#41823,#41824,#41825); +#41823 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#41824 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#41825 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#41826 = ADVANCED_FACE('',(#41827),#41838,.F.); +#41827 = FACE_BOUND('',#41828,.F.); +#41828 = EDGE_LOOP('',(#41829,#41835,#41836,#41837)); +#41829 = ORIENTED_EDGE('',*,*,#41830,.T.); +#41830 = EDGE_CURVE('',#39993,#40102,#41831,.T.); +#41831 = LINE('',#41832,#41833); +#41832 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2)); +#41833 = VECTOR('',#41834,1.); +#41834 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41835 = ORIENTED_EDGE('',*,*,#40109,.T.); +#41836 = ORIENTED_EDGE('',*,*,#41813,.F.); +#41837 = ORIENTED_EDGE('',*,*,#40000,.F.); +#41838 = CYLINDRICAL_SURFACE('',#41839,0.1); +#41839 = AXIS2_PLACEMENT_3D('',#41840,#41841,#41842); +#41840 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#41841 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41842 = DIRECTION('',(-0.,0.,-1.)); +#41843 = ADVANCED_FACE('',(#41844),#41855,.F.); +#41844 = FACE_BOUND('',#41845,.F.); +#41845 = EDGE_LOOP('',(#41846,#41852,#41853,#41854)); +#41846 = ORIENTED_EDGE('',*,*,#41847,.T.); +#41847 = EDGE_CURVE('',#39985,#40094,#41848,.T.); +#41848 = LINE('',#41849,#41850); +#41849 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#41850 = VECTOR('',#41851,1.); +#41851 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41852 = ORIENTED_EDGE('',*,*,#40101,.T.); +#41853 = ORIENTED_EDGE('',*,*,#41830,.F.); +#41854 = ORIENTED_EDGE('',*,*,#39992,.F.); +#41855 = PLANE('',#41856); +#41856 = AXIS2_PLACEMENT_3D('',#41857,#41858,#41859); +#41857 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#41858 = DIRECTION('',(0.,0.,-1.)); +#41859 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41860 = ADVANCED_FACE('',(#41861),#41872,.F.); +#41861 = FACE_BOUND('',#41862,.F.); +#41862 = EDGE_LOOP('',(#41863,#41869,#41870,#41871)); +#41863 = ORIENTED_EDGE('',*,*,#41864,.T.); +#41864 = EDGE_CURVE('',#39977,#40086,#41865,.T.); +#41865 = LINE('',#41866,#41867); +#41866 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#41867 = VECTOR('',#41868,1.); +#41868 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41869 = ORIENTED_EDGE('',*,*,#40093,.T.); +#41870 = ORIENTED_EDGE('',*,*,#41847,.F.); +#41871 = ORIENTED_EDGE('',*,*,#39984,.F.); +#41872 = PLANE('',#41873); +#41873 = AXIS2_PLACEMENT_3D('',#41874,#41875,#41876); +#41874 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#41875 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41876 = DIRECTION('',(0.,0.,1.)); +#41877 = ADVANCED_FACE('',(#41878),#41889,.F.); +#41878 = FACE_BOUND('',#41879,.F.); +#41879 = EDGE_LOOP('',(#41880,#41886,#41887,#41888)); +#41880 = ORIENTED_EDGE('',*,*,#41881,.T.); +#41881 = EDGE_CURVE('',#39968,#40077,#41882,.T.); +#41882 = LINE('',#41883,#41884); +#41883 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#41884 = VECTOR('',#41885,1.); +#41885 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41886 = ORIENTED_EDGE('',*,*,#40085,.T.); +#41887 = ORIENTED_EDGE('',*,*,#41864,.F.); +#41888 = ORIENTED_EDGE('',*,*,#39976,.F.); +#41889 = PLANE('',#41890); +#41890 = AXIS2_PLACEMENT_3D('',#41891,#41892,#41893); +#41891 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#41892 = DIRECTION('',(0.,0.,1.)); +#41893 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#41894 = ADVANCED_FACE('',(#41895),#41906,.T.); +#41895 = FACE_BOUND('',#41896,.T.); +#41896 = EDGE_LOOP('',(#41897,#41898,#41899,#41900)); +#41897 = ORIENTED_EDGE('',*,*,#39967,.T.); +#41898 = ORIENTED_EDGE('',*,*,#41881,.T.); +#41899 = ORIENTED_EDGE('',*,*,#40076,.F.); +#41900 = ORIENTED_EDGE('',*,*,#41901,.F.); +#41901 = EDGE_CURVE('',#39960,#40069,#41902,.T.); +#41902 = LINE('',#41903,#41904); +#41903 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467)); +#41904 = VECTOR('',#41905,1.); +#41905 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41906 = CYLINDRICAL_SURFACE('',#41907,0.3); +#41907 = AXIS2_PLACEMENT_3D('',#41908,#41909,#41910); +#41908 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#41909 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41910 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#41911 = ADVANCED_FACE('',(#41912),#41918,.F.); +#41912 = FACE_BOUND('',#41913,.F.); +#41913 = EDGE_LOOP('',(#41914,#41915,#41916,#41917)); +#41914 = ORIENTED_EDGE('',*,*,#40050,.T.); +#41915 = ORIENTED_EDGE('',*,*,#40068,.T.); +#41916 = ORIENTED_EDGE('',*,*,#41901,.F.); +#41917 = ORIENTED_EDGE('',*,*,#39959,.F.); +#41918 = PLANE('',#41919); +#41919 = AXIS2_PLACEMENT_3D('',#41920,#41921,#41922); +#41920 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#41921 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#41922 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#41923 = ADVANCED_FACE('',(#41924),#41935,.T.); +#41924 = FACE_BOUND('',#41925,.T.); +#41925 = EDGE_LOOP('',(#41926,#41927,#41928,#41929)); +#41926 = ORIENTED_EDGE('',*,*,#40240,.T.); +#41927 = ORIENTED_EDGE('',*,*,#41483,.T.); +#41928 = ORIENTED_EDGE('',*,*,#40349,.F.); +#41929 = ORIENTED_EDGE('',*,*,#41930,.F.); +#41930 = EDGE_CURVE('',#40233,#40342,#41931,.T.); +#41931 = LINE('',#41932,#41933); +#41932 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533)); +#41933 = VECTOR('',#41934,1.); +#41934 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41935 = CYLINDRICAL_SURFACE('',#41936,0.3); +#41936 = AXIS2_PLACEMENT_3D('',#41937,#41938,#41939); +#41937 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#41938 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41939 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41940 = ADVANCED_FACE('',(#41941),#41952,.F.); +#41941 = FACE_BOUND('',#41942,.F.); +#41942 = EDGE_LOOP('',(#41943,#41949,#41950,#41951)); +#41943 = ORIENTED_EDGE('',*,*,#41944,.T.); +#41944 = EDGE_CURVE('',#40224,#40333,#41945,.T.); +#41945 = LINE('',#41946,#41947); +#41946 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#41947 = VECTOR('',#41948,1.); +#41948 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41949 = ORIENTED_EDGE('',*,*,#40341,.T.); +#41950 = ORIENTED_EDGE('',*,*,#41930,.F.); +#41951 = ORIENTED_EDGE('',*,*,#40232,.F.); +#41952 = PLANE('',#41953); +#41953 = AXIS2_PLACEMENT_3D('',#41954,#41955,#41956); +#41954 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#41955 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#41956 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#41957 = ADVANCED_FACE('',(#41958),#41969,.F.); +#41958 = FACE_BOUND('',#41959,.F.); +#41959 = EDGE_LOOP('',(#41960,#41966,#41967,#41968)); +#41960 = ORIENTED_EDGE('',*,*,#41961,.T.); +#41961 = EDGE_CURVE('',#40216,#40325,#41962,.T.); +#41962 = LINE('',#41963,#41964); +#41963 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2)); +#41964 = VECTOR('',#41965,1.); +#41965 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41966 = ORIENTED_EDGE('',*,*,#40332,.T.); +#41967 = ORIENTED_EDGE('',*,*,#41944,.F.); +#41968 = ORIENTED_EDGE('',*,*,#40223,.F.); +#41969 = CYLINDRICAL_SURFACE('',#41970,0.1); +#41970 = AXIS2_PLACEMENT_3D('',#41971,#41972,#41973); +#41971 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#41972 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41973 = DIRECTION('',(-0.,0.,-1.)); +#41974 = ADVANCED_FACE('',(#41975),#41986,.F.); +#41975 = FACE_BOUND('',#41976,.F.); +#41976 = EDGE_LOOP('',(#41977,#41983,#41984,#41985)); +#41977 = ORIENTED_EDGE('',*,*,#41978,.T.); +#41978 = EDGE_CURVE('',#40208,#40317,#41979,.T.); +#41979 = LINE('',#41980,#41981); +#41980 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#41981 = VECTOR('',#41982,1.); +#41982 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41983 = ORIENTED_EDGE('',*,*,#40324,.T.); +#41984 = ORIENTED_EDGE('',*,*,#41961,.F.); +#41985 = ORIENTED_EDGE('',*,*,#40215,.F.); +#41986 = PLANE('',#41987); +#41987 = AXIS2_PLACEMENT_3D('',#41988,#41989,#41990); +#41988 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#41989 = DIRECTION('',(0.,0.,-1.)); +#41990 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41991 = ADVANCED_FACE('',(#41992),#42003,.F.); +#41992 = FACE_BOUND('',#41993,.F.); +#41993 = EDGE_LOOP('',(#41994,#42000,#42001,#42002)); +#41994 = ORIENTED_EDGE('',*,*,#41995,.T.); +#41995 = EDGE_CURVE('',#40200,#40309,#41996,.T.); +#41996 = LINE('',#41997,#41998); +#41997 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#41998 = VECTOR('',#41999,1.); +#41999 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42000 = ORIENTED_EDGE('',*,*,#40316,.T.); +#42001 = ORIENTED_EDGE('',*,*,#41978,.F.); +#42002 = ORIENTED_EDGE('',*,*,#40207,.F.); +#42003 = PLANE('',#42004); +#42004 = AXIS2_PLACEMENT_3D('',#42005,#42006,#42007); +#42005 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#42006 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#42007 = DIRECTION('',(0.,0.,1.)); +#42008 = ADVANCED_FACE('',(#42009),#42020,.F.); +#42009 = FACE_BOUND('',#42010,.F.); +#42010 = EDGE_LOOP('',(#42011,#42017,#42018,#42019)); +#42011 = ORIENTED_EDGE('',*,*,#42012,.T.); +#42012 = EDGE_CURVE('',#40191,#40300,#42013,.T.); +#42013 = LINE('',#42014,#42015); +#42014 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#42015 = VECTOR('',#42016,1.); +#42016 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42017 = ORIENTED_EDGE('',*,*,#40308,.T.); +#42018 = ORIENTED_EDGE('',*,*,#41995,.F.); +#42019 = ORIENTED_EDGE('',*,*,#40199,.F.); +#42020 = PLANE('',#42021); +#42021 = AXIS2_PLACEMENT_3D('',#42022,#42023,#42024); +#42022 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#42023 = DIRECTION('',(0.,0.,1.)); +#42024 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#42025 = ADVANCED_FACE('',(#42026),#42037,.T.); +#42026 = FACE_BOUND('',#42027,.T.); +#42027 = EDGE_LOOP('',(#42028,#42029,#42030,#42031)); +#42028 = ORIENTED_EDGE('',*,*,#40190,.T.); +#42029 = ORIENTED_EDGE('',*,*,#42012,.T.); +#42030 = ORIENTED_EDGE('',*,*,#40299,.F.); +#42031 = ORIENTED_EDGE('',*,*,#42032,.F.); +#42032 = EDGE_CURVE('',#40183,#40292,#42033,.T.); +#42033 = LINE('',#42034,#42035); +#42034 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467)); +#42035 = VECTOR('',#42036,1.); +#42036 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42037 = CYLINDRICAL_SURFACE('',#42038,0.3); +#42038 = AXIS2_PLACEMENT_3D('',#42039,#42040,#42041); +#42039 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#42040 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#42041 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#42042 = ADVANCED_FACE('',(#42043),#42049,.F.); +#42043 = FACE_BOUND('',#42044,.F.); +#42044 = EDGE_LOOP('',(#42045,#42046,#42047,#42048)); +#42045 = ORIENTED_EDGE('',*,*,#40273,.T.); +#42046 = ORIENTED_EDGE('',*,*,#40291,.T.); +#42047 = ORIENTED_EDGE('',*,*,#42032,.F.); +#42048 = ORIENTED_EDGE('',*,*,#40182,.F.); +#42049 = PLANE('',#42050); +#42050 = AXIS2_PLACEMENT_3D('',#42051,#42052,#42053); +#42051 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#42052 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#42053 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#42054 = ADVANCED_FACE('',(#42055),#42066,.F.); +#42055 = FACE_BOUND('',#42056,.F.); +#42056 = EDGE_LOOP('',(#42057,#42063,#42064,#42065)); +#42057 = ORIENTED_EDGE('',*,*,#42058,.T.); +#42058 = EDGE_CURVE('',#40442,#40544,#42059,.T.); +#42059 = LINE('',#42060,#42061); +#42060 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#42061 = VECTOR('',#42062,1.); +#42062 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42063 = ORIENTED_EDGE('',*,*,#40552,.T.); +#42064 = ORIENTED_EDGE('',*,*,#41430,.F.); +#42065 = ORIENTED_EDGE('',*,*,#40450,.F.); +#42066 = PLANE('',#42067); +#42067 = AXIS2_PLACEMENT_3D('',#42068,#42069,#42070); +#42068 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#42069 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#42070 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#42071 = ADVANCED_FACE('',(#42072),#42083,.F.); +#42072 = FACE_BOUND('',#42073,.F.); +#42073 = EDGE_LOOP('',(#42074,#42080,#42081,#42082)); +#42074 = ORIENTED_EDGE('',*,*,#42075,.T.); +#42075 = EDGE_CURVE('',#40434,#40536,#42076,.T.); +#42076 = LINE('',#42077,#42078); +#42077 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2)); +#42078 = VECTOR('',#42079,1.); +#42079 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42080 = ORIENTED_EDGE('',*,*,#40543,.T.); +#42081 = ORIENTED_EDGE('',*,*,#42058,.F.); +#42082 = ORIENTED_EDGE('',*,*,#40441,.F.); +#42083 = CYLINDRICAL_SURFACE('',#42084,0.1); +#42084 = AXIS2_PLACEMENT_3D('',#42085,#42086,#42087); +#42085 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#42086 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#42087 = DIRECTION('',(-0.,0.,-1.)); +#42088 = ADVANCED_FACE('',(#42089),#42100,.F.); +#42089 = FACE_BOUND('',#42090,.F.); +#42090 = EDGE_LOOP('',(#42091,#42097,#42098,#42099)); +#42091 = ORIENTED_EDGE('',*,*,#42092,.T.); +#42092 = EDGE_CURVE('',#40426,#40528,#42093,.T.); +#42093 = LINE('',#42094,#42095); +#42094 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#42095 = VECTOR('',#42096,1.); +#42096 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42097 = ORIENTED_EDGE('',*,*,#40535,.T.); +#42098 = ORIENTED_EDGE('',*,*,#42075,.F.); +#42099 = ORIENTED_EDGE('',*,*,#40433,.F.); +#42100 = PLANE('',#42101); +#42101 = AXIS2_PLACEMENT_3D('',#42102,#42103,#42104); +#42102 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#42103 = DIRECTION('',(0.,0.,-1.)); +#42104 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#42105 = ADVANCED_FACE('',(#42106),#42117,.F.); +#42106 = FACE_BOUND('',#42107,.F.); +#42107 = EDGE_LOOP('',(#42108,#42114,#42115,#42116)); +#42108 = ORIENTED_EDGE('',*,*,#42109,.T.); +#42109 = EDGE_CURVE('',#40418,#40520,#42110,.T.); +#42110 = LINE('',#42111,#42112); +#42111 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#42112 = VECTOR('',#42113,1.); +#42113 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42114 = ORIENTED_EDGE('',*,*,#40527,.T.); +#42115 = ORIENTED_EDGE('',*,*,#42092,.F.); +#42116 = ORIENTED_EDGE('',*,*,#40425,.F.); +#42117 = PLANE('',#42118); +#42118 = AXIS2_PLACEMENT_3D('',#42119,#42120,#42121); +#42119 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#42120 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#42121 = DIRECTION('',(0.,0.,1.)); +#42122 = ADVANCED_FACE('',(#42123),#42134,.F.); +#42123 = FACE_BOUND('',#42124,.F.); +#42124 = EDGE_LOOP('',(#42125,#42131,#42132,#42133)); +#42125 = ORIENTED_EDGE('',*,*,#42126,.T.); +#42126 = EDGE_CURVE('',#40409,#40511,#42127,.T.); +#42127 = LINE('',#42128,#42129); +#42128 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#42129 = VECTOR('',#42130,1.); +#42130 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42131 = ORIENTED_EDGE('',*,*,#40519,.T.); +#42132 = ORIENTED_EDGE('',*,*,#42109,.F.); +#42133 = ORIENTED_EDGE('',*,*,#40417,.F.); +#42134 = PLANE('',#42135); +#42135 = AXIS2_PLACEMENT_3D('',#42136,#42137,#42138); +#42136 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#42137 = DIRECTION('',(0.,0.,1.)); +#42138 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#42139 = ADVANCED_FACE('',(#42140),#42151,.T.); +#42140 = FACE_BOUND('',#42141,.T.); +#42141 = EDGE_LOOP('',(#42142,#42143,#42144,#42145)); +#42142 = ORIENTED_EDGE('',*,*,#40408,.T.); +#42143 = ORIENTED_EDGE('',*,*,#42126,.T.); +#42144 = ORIENTED_EDGE('',*,*,#40510,.F.); +#42145 = ORIENTED_EDGE('',*,*,#42146,.F.); +#42146 = EDGE_CURVE('',#40401,#40503,#42147,.T.); +#42147 = LINE('',#42148,#42149); +#42148 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467)); +#42149 = VECTOR('',#42150,1.); +#42150 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42151 = CYLINDRICAL_SURFACE('',#42152,0.3); +#42152 = AXIS2_PLACEMENT_3D('',#42153,#42154,#42155); +#42153 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#42154 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#42155 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#42156 = ADVANCED_FACE('',(#42157),#42163,.F.); +#42157 = FACE_BOUND('',#42158,.F.); +#42158 = EDGE_LOOP('',(#42159,#42160,#42161,#42162)); +#42159 = ORIENTED_EDGE('',*,*,#40484,.T.); +#42160 = ORIENTED_EDGE('',*,*,#40502,.T.); +#42161 = ORIENTED_EDGE('',*,*,#42146,.F.); +#42162 = ORIENTED_EDGE('',*,*,#40400,.F.); +#42163 = PLANE('',#42164); +#42164 = AXIS2_PLACEMENT_3D('',#42165,#42166,#42167); +#42165 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#42166 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#42167 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#42168 = ADVANCED_FACE('',(#42169),#42180,.F.); +#42169 = FACE_BOUND('',#42170,.F.); +#42170 = EDGE_LOOP('',(#42171,#42177,#42178,#42179)); +#42171 = ORIENTED_EDGE('',*,*,#42172,.T.); +#42172 = EDGE_CURVE('',#40629,#40731,#42173,.T.); +#42173 = LINE('',#42174,#42175); +#42174 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#42175 = VECTOR('',#42176,1.); +#42176 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42177 = ORIENTED_EDGE('',*,*,#40739,.T.); +#42178 = ORIENTED_EDGE('',*,*,#41639,.F.); +#42179 = ORIENTED_EDGE('',*,*,#40637,.F.); +#42180 = PLANE('',#42181); +#42181 = AXIS2_PLACEMENT_3D('',#42182,#42183,#42184); +#42182 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#42183 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42184 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42185 = ADVANCED_FACE('',(#42186),#42197,.F.); +#42186 = FACE_BOUND('',#42187,.F.); +#42187 = EDGE_LOOP('',(#42188,#42194,#42195,#42196)); +#42188 = ORIENTED_EDGE('',*,*,#42189,.T.); +#42189 = EDGE_CURVE('',#40621,#40723,#42190,.T.); +#42190 = LINE('',#42191,#42192); +#42191 = CARTESIAN_POINT('',(2.724938966801,2.11,0.2)); +#42192 = VECTOR('',#42193,1.); +#42193 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42194 = ORIENTED_EDGE('',*,*,#40730,.T.); +#42195 = ORIENTED_EDGE('',*,*,#42172,.F.); +#42196 = ORIENTED_EDGE('',*,*,#40628,.F.); +#42197 = CYLINDRICAL_SURFACE('',#42198,0.1); +#42198 = AXIS2_PLACEMENT_3D('',#42199,#42200,#42201); +#42199 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#42200 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42201 = DIRECTION('',(0.,0.,-1.)); +#42202 = ADVANCED_FACE('',(#42203),#42214,.F.); +#42203 = FACE_BOUND('',#42204,.F.); +#42204 = EDGE_LOOP('',(#42205,#42211,#42212,#42213)); +#42205 = ORIENTED_EDGE('',*,*,#42206,.T.); +#42206 = EDGE_CURVE('',#40613,#40715,#42207,.T.); +#42207 = LINE('',#42208,#42209); +#42208 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#42209 = VECTOR('',#42210,1.); +#42210 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42211 = ORIENTED_EDGE('',*,*,#40722,.T.); +#42212 = ORIENTED_EDGE('',*,*,#42189,.F.); +#42213 = ORIENTED_EDGE('',*,*,#40620,.F.); +#42214 = PLANE('',#42215); +#42215 = AXIS2_PLACEMENT_3D('',#42216,#42217,#42218); +#42216 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#42217 = DIRECTION('',(0.,0.,-1.)); +#42218 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42219 = ADVANCED_FACE('',(#42220),#42231,.F.); +#42220 = FACE_BOUND('',#42221,.F.); +#42221 = EDGE_LOOP('',(#42222,#42228,#42229,#42230)); +#42222 = ORIENTED_EDGE('',*,*,#42223,.T.); +#42223 = EDGE_CURVE('',#40605,#40707,#42224,.T.); +#42224 = LINE('',#42225,#42226); +#42225 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#42226 = VECTOR('',#42227,1.); +#42227 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42228 = ORIENTED_EDGE('',*,*,#40714,.T.); +#42229 = ORIENTED_EDGE('',*,*,#42206,.F.); +#42230 = ORIENTED_EDGE('',*,*,#40612,.F.); +#42231 = PLANE('',#42232); +#42232 = AXIS2_PLACEMENT_3D('',#42233,#42234,#42235); +#42233 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#42234 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42235 = DIRECTION('',(0.,0.,1.)); +#42236 = ADVANCED_FACE('',(#42237),#42248,.F.); +#42237 = FACE_BOUND('',#42238,.F.); +#42238 = EDGE_LOOP('',(#42239,#42245,#42246,#42247)); +#42239 = ORIENTED_EDGE('',*,*,#42240,.T.); +#42240 = EDGE_CURVE('',#40596,#40698,#42241,.T.); +#42241 = LINE('',#42242,#42243); +#42242 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#42243 = VECTOR('',#42244,1.); +#42244 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42245 = ORIENTED_EDGE('',*,*,#40706,.T.); +#42246 = ORIENTED_EDGE('',*,*,#42223,.F.); +#42247 = ORIENTED_EDGE('',*,*,#40604,.F.); +#42248 = PLANE('',#42249); +#42249 = AXIS2_PLACEMENT_3D('',#42250,#42251,#42252); +#42250 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#42251 = DIRECTION('',(0.,0.,1.)); +#42252 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42253 = ADVANCED_FACE('',(#42254),#42265,.T.); +#42254 = FACE_BOUND('',#42255,.T.); +#42255 = EDGE_LOOP('',(#42256,#42257,#42258,#42259)); +#42256 = ORIENTED_EDGE('',*,*,#40595,.T.); +#42257 = ORIENTED_EDGE('',*,*,#42240,.T.); +#42258 = ORIENTED_EDGE('',*,*,#40697,.F.); +#42259 = ORIENTED_EDGE('',*,*,#42260,.F.); +#42260 = EDGE_CURVE('',#40588,#40690,#42261,.T.); +#42261 = LINE('',#42262,#42263); +#42262 = CARTESIAN_POINT('',(2.429496640897,2.11,0.2479055467)); +#42263 = VECTOR('',#42264,1.); +#42264 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42265 = CYLINDRICAL_SURFACE('',#42266,0.3); +#42266 = AXIS2_PLACEMENT_3D('',#42267,#42268,#42269); +#42267 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#42268 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42269 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42270 = ADVANCED_FACE('',(#42271),#42277,.F.); +#42271 = FACE_BOUND('',#42272,.F.); +#42272 = EDGE_LOOP('',(#42273,#42274,#42275,#42276)); +#42273 = ORIENTED_EDGE('',*,*,#40671,.T.); +#42274 = ORIENTED_EDGE('',*,*,#40689,.T.); +#42275 = ORIENTED_EDGE('',*,*,#42260,.F.); +#42276 = ORIENTED_EDGE('',*,*,#40587,.F.); +#42277 = PLANE('',#42278); +#42278 = AXIS2_PLACEMENT_3D('',#42279,#42280,#42281); +#42279 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#42280 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42281 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42282 = ADVANCED_FACE('',(#42283),#42294,.T.); +#42283 = FACE_BOUND('',#42284,.T.); +#42284 = EDGE_LOOP('',(#42285,#42286,#42287,#42288)); +#42285 = ORIENTED_EDGE('',*,*,#40849,.T.); +#42286 = ORIENTED_EDGE('',*,*,#41564,.T.); +#42287 = ORIENTED_EDGE('',*,*,#40958,.F.); +#42288 = ORIENTED_EDGE('',*,*,#42289,.F.); +#42289 = EDGE_CURVE('',#40842,#40951,#42290,.T.); +#42290 = LINE('',#42291,#42292); +#42291 = CARTESIAN_POINT('',(2.545442325904,0.84,0.7770944533)); +#42292 = VECTOR('',#42293,1.); +#42293 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42294 = CYLINDRICAL_SURFACE('',#42295,0.3); +#42295 = AXIS2_PLACEMENT_3D('',#42296,#42297,#42298); +#42296 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#42297 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42298 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#42299 = ADVANCED_FACE('',(#42300),#42311,.F.); +#42300 = FACE_BOUND('',#42301,.F.); +#42301 = EDGE_LOOP('',(#42302,#42308,#42309,#42310)); +#42302 = ORIENTED_EDGE('',*,*,#42303,.T.); +#42303 = EDGE_CURVE('',#40833,#40942,#42304,.T.); +#42304 = LINE('',#42305,#42306); +#42305 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#42306 = VECTOR('',#42307,1.); +#42307 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42308 = ORIENTED_EDGE('',*,*,#40950,.T.); +#42309 = ORIENTED_EDGE('',*,*,#42289,.F.); +#42310 = ORIENTED_EDGE('',*,*,#40841,.F.); +#42311 = PLANE('',#42312); +#42312 = AXIS2_PLACEMENT_3D('',#42313,#42314,#42315); +#42313 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#42314 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42315 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42316 = ADVANCED_FACE('',(#42317),#42328,.F.); +#42317 = FACE_BOUND('',#42318,.F.); +#42318 = EDGE_LOOP('',(#42319,#42325,#42326,#42327)); +#42319 = ORIENTED_EDGE('',*,*,#42320,.T.); +#42320 = EDGE_CURVE('',#40825,#40934,#42321,.T.); +#42321 = LINE('',#42322,#42323); +#42322 = CARTESIAN_POINT('',(2.724938966801,0.84,0.2)); +#42323 = VECTOR('',#42324,1.); +#42324 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42325 = ORIENTED_EDGE('',*,*,#40941,.T.); +#42326 = ORIENTED_EDGE('',*,*,#42303,.F.); +#42327 = ORIENTED_EDGE('',*,*,#40832,.F.); +#42328 = CYLINDRICAL_SURFACE('',#42329,0.1); +#42329 = AXIS2_PLACEMENT_3D('',#42330,#42331,#42332); +#42330 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#42331 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42332 = DIRECTION('',(0.,0.,-1.)); +#42333 = ADVANCED_FACE('',(#42334),#42345,.F.); +#42334 = FACE_BOUND('',#42335,.F.); +#42335 = EDGE_LOOP('',(#42336,#42342,#42343,#42344)); +#42336 = ORIENTED_EDGE('',*,*,#42337,.T.); +#42337 = EDGE_CURVE('',#40817,#40926,#42338,.T.); +#42338 = LINE('',#42339,#42340); +#42339 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#42340 = VECTOR('',#42341,1.); +#42341 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42342 = ORIENTED_EDGE('',*,*,#40933,.T.); +#42343 = ORIENTED_EDGE('',*,*,#42320,.F.); +#42344 = ORIENTED_EDGE('',*,*,#40824,.F.); +#42345 = PLANE('',#42346); +#42346 = AXIS2_PLACEMENT_3D('',#42347,#42348,#42349); +#42347 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#42348 = DIRECTION('',(0.,0.,-1.)); +#42349 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42350 = ADVANCED_FACE('',(#42351),#42362,.F.); +#42351 = FACE_BOUND('',#42352,.F.); +#42352 = EDGE_LOOP('',(#42353,#42359,#42360,#42361)); +#42353 = ORIENTED_EDGE('',*,*,#42354,.T.); +#42354 = EDGE_CURVE('',#40809,#40918,#42355,.T.); +#42355 = LINE('',#42356,#42357); +#42356 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#42357 = VECTOR('',#42358,1.); +#42358 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42359 = ORIENTED_EDGE('',*,*,#40925,.T.); +#42360 = ORIENTED_EDGE('',*,*,#42337,.F.); +#42361 = ORIENTED_EDGE('',*,*,#40816,.F.); +#42362 = PLANE('',#42363); +#42363 = AXIS2_PLACEMENT_3D('',#42364,#42365,#42366); +#42364 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#42365 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42366 = DIRECTION('',(0.,0.,1.)); +#42367 = ADVANCED_FACE('',(#42368),#42379,.F.); +#42368 = FACE_BOUND('',#42369,.F.); +#42369 = EDGE_LOOP('',(#42370,#42376,#42377,#42378)); +#42370 = ORIENTED_EDGE('',*,*,#42371,.T.); +#42371 = EDGE_CURVE('',#40800,#40909,#42372,.T.); +#42372 = LINE('',#42373,#42374); +#42373 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#42374 = VECTOR('',#42375,1.); +#42375 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42376 = ORIENTED_EDGE('',*,*,#40917,.T.); +#42377 = ORIENTED_EDGE('',*,*,#42354,.F.); +#42378 = ORIENTED_EDGE('',*,*,#40808,.F.); +#42379 = PLANE('',#42380); +#42380 = AXIS2_PLACEMENT_3D('',#42381,#42382,#42383); +#42381 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#42382 = DIRECTION('',(0.,0.,1.)); +#42383 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42384 = ADVANCED_FACE('',(#42385),#42396,.T.); +#42385 = FACE_BOUND('',#42386,.T.); +#42386 = EDGE_LOOP('',(#42387,#42388,#42389,#42390)); +#42387 = ORIENTED_EDGE('',*,*,#40799,.T.); +#42388 = ORIENTED_EDGE('',*,*,#42371,.T.); +#42389 = ORIENTED_EDGE('',*,*,#40908,.F.); +#42390 = ORIENTED_EDGE('',*,*,#42391,.F.); +#42391 = EDGE_CURVE('',#40792,#40901,#42392,.T.); +#42392 = LINE('',#42393,#42394); +#42393 = CARTESIAN_POINT('',(2.429496640897,0.84,0.2479055467)); +#42394 = VECTOR('',#42395,1.); +#42395 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42396 = CYLINDRICAL_SURFACE('',#42397,0.3); +#42397 = AXIS2_PLACEMENT_3D('',#42398,#42399,#42400); +#42398 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#42399 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42400 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42401 = ADVANCED_FACE('',(#42402),#42408,.F.); +#42402 = FACE_BOUND('',#42403,.F.); +#42403 = EDGE_LOOP('',(#42404,#42405,#42406,#42407)); +#42404 = ORIENTED_EDGE('',*,*,#40882,.T.); +#42405 = ORIENTED_EDGE('',*,*,#40900,.T.); +#42406 = ORIENTED_EDGE('',*,*,#42391,.F.); +#42407 = ORIENTED_EDGE('',*,*,#40791,.F.); +#42408 = PLANE('',#42409); +#42409 = AXIS2_PLACEMENT_3D('',#42410,#42411,#42412); +#42410 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#42411 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42412 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42413 = ADVANCED_FACE('',(#42414),#42425,.T.); +#42414 = FACE_BOUND('',#42415,.T.); +#42415 = EDGE_LOOP('',(#42416,#42417,#42418,#42419)); +#42416 = ORIENTED_EDGE('',*,*,#41072,.T.); +#42417 = ORIENTED_EDGE('',*,*,#41583,.T.); +#42418 = ORIENTED_EDGE('',*,*,#41181,.F.); +#42419 = ORIENTED_EDGE('',*,*,#42420,.F.); +#42420 = EDGE_CURVE('',#41065,#41174,#42421,.T.); +#42421 = LINE('',#42422,#42423); +#42422 = CARTESIAN_POINT('',(2.545442325904,-0.43,0.7770944533)); +#42423 = VECTOR('',#42424,1.); +#42424 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42425 = CYLINDRICAL_SURFACE('',#42426,0.3); +#42426 = AXIS2_PLACEMENT_3D('',#42427,#42428,#42429); +#42427 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#42428 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42429 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#42430 = ADVANCED_FACE('',(#42431),#42442,.F.); +#42431 = FACE_BOUND('',#42432,.F.); +#42432 = EDGE_LOOP('',(#42433,#42439,#42440,#42441)); +#42433 = ORIENTED_EDGE('',*,*,#42434,.T.); +#42434 = EDGE_CURVE('',#41056,#41165,#42435,.T.); +#42435 = LINE('',#42436,#42437); +#42436 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#42437 = VECTOR('',#42438,1.); +#42438 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42439 = ORIENTED_EDGE('',*,*,#41173,.T.); +#42440 = ORIENTED_EDGE('',*,*,#42420,.F.); +#42441 = ORIENTED_EDGE('',*,*,#41064,.F.); +#42442 = PLANE('',#42443); +#42443 = AXIS2_PLACEMENT_3D('',#42444,#42445,#42446); +#42444 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#42445 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42446 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42447 = ADVANCED_FACE('',(#42448),#42459,.F.); +#42448 = FACE_BOUND('',#42449,.F.); +#42449 = EDGE_LOOP('',(#42450,#42456,#42457,#42458)); +#42450 = ORIENTED_EDGE('',*,*,#42451,.T.); +#42451 = EDGE_CURVE('',#41048,#41157,#42452,.T.); +#42452 = LINE('',#42453,#42454); +#42453 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.2)); +#42454 = VECTOR('',#42455,1.); +#42455 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42456 = ORIENTED_EDGE('',*,*,#41164,.T.); +#42457 = ORIENTED_EDGE('',*,*,#42434,.F.); +#42458 = ORIENTED_EDGE('',*,*,#41055,.F.); +#42459 = CYLINDRICAL_SURFACE('',#42460,0.1); +#42460 = AXIS2_PLACEMENT_3D('',#42461,#42462,#42463); +#42461 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#42462 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42463 = DIRECTION('',(0.,0.,-1.)); +#42464 = ADVANCED_FACE('',(#42465),#42476,.F.); +#42465 = FACE_BOUND('',#42466,.F.); +#42466 = EDGE_LOOP('',(#42467,#42473,#42474,#42475)); +#42467 = ORIENTED_EDGE('',*,*,#42468,.T.); +#42468 = EDGE_CURVE('',#41040,#41149,#42469,.T.); +#42469 = LINE('',#42470,#42471); +#42470 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#42471 = VECTOR('',#42472,1.); +#42472 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42473 = ORIENTED_EDGE('',*,*,#41156,.T.); +#42474 = ORIENTED_EDGE('',*,*,#42451,.F.); +#42475 = ORIENTED_EDGE('',*,*,#41047,.F.); +#42476 = PLANE('',#42477); +#42477 = AXIS2_PLACEMENT_3D('',#42478,#42479,#42480); +#42478 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#42479 = DIRECTION('',(0.,0.,-1.)); +#42480 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42481 = ADVANCED_FACE('',(#42482),#42493,.F.); +#42482 = FACE_BOUND('',#42483,.F.); +#42483 = EDGE_LOOP('',(#42484,#42490,#42491,#42492)); +#42484 = ORIENTED_EDGE('',*,*,#42485,.T.); +#42485 = EDGE_CURVE('',#41032,#41141,#42486,.T.); +#42486 = LINE('',#42487,#42488); +#42487 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#42488 = VECTOR('',#42489,1.); +#42489 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42490 = ORIENTED_EDGE('',*,*,#41148,.T.); +#42491 = ORIENTED_EDGE('',*,*,#42468,.F.); +#42492 = ORIENTED_EDGE('',*,*,#41039,.F.); +#42493 = PLANE('',#42494); +#42494 = AXIS2_PLACEMENT_3D('',#42495,#42496,#42497); +#42495 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#42496 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42497 = DIRECTION('',(0.,0.,1.)); +#42498 = ADVANCED_FACE('',(#42499),#42510,.F.); +#42499 = FACE_BOUND('',#42500,.F.); +#42500 = EDGE_LOOP('',(#42501,#42507,#42508,#42509)); +#42501 = ORIENTED_EDGE('',*,*,#42502,.T.); +#42502 = EDGE_CURVE('',#41023,#41132,#42503,.T.); +#42503 = LINE('',#42504,#42505); +#42504 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#42505 = VECTOR('',#42506,1.); +#42506 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42507 = ORIENTED_EDGE('',*,*,#41140,.T.); +#42508 = ORIENTED_EDGE('',*,*,#42485,.F.); +#42509 = ORIENTED_EDGE('',*,*,#41031,.F.); +#42510 = PLANE('',#42511); +#42511 = AXIS2_PLACEMENT_3D('',#42512,#42513,#42514); +#42512 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#42513 = DIRECTION('',(0.,0.,1.)); +#42514 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42515 = ADVANCED_FACE('',(#42516),#42527,.T.); +#42516 = FACE_BOUND('',#42517,.T.); +#42517 = EDGE_LOOP('',(#42518,#42519,#42520,#42521)); +#42518 = ORIENTED_EDGE('',*,*,#41022,.T.); +#42519 = ORIENTED_EDGE('',*,*,#42502,.T.); +#42520 = ORIENTED_EDGE('',*,*,#41131,.F.); +#42521 = ORIENTED_EDGE('',*,*,#42522,.F.); +#42522 = EDGE_CURVE('',#41015,#41124,#42523,.T.); +#42523 = LINE('',#42524,#42525); +#42524 = CARTESIAN_POINT('',(2.429496640897,-0.43,0.2479055467)); +#42525 = VECTOR('',#42526,1.); +#42526 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42527 = CYLINDRICAL_SURFACE('',#42528,0.3); +#42528 = AXIS2_PLACEMENT_3D('',#42529,#42530,#42531); +#42529 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#42530 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42531 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42532 = ADVANCED_FACE('',(#42533),#42539,.F.); +#42533 = FACE_BOUND('',#42534,.F.); +#42534 = EDGE_LOOP('',(#42535,#42536,#42537,#42538)); +#42535 = ORIENTED_EDGE('',*,*,#41105,.T.); +#42536 = ORIENTED_EDGE('',*,*,#41123,.T.); +#42537 = ORIENTED_EDGE('',*,*,#42522,.F.); +#42538 = ORIENTED_EDGE('',*,*,#41014,.F.); +#42539 = PLANE('',#42540); +#42540 = AXIS2_PLACEMENT_3D('',#42541,#42542,#42543); +#42541 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#42542 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42543 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42544 = ADVANCED_FACE('',(#42545),#42556,.T.); +#42545 = FACE_BOUND('',#42546,.T.); +#42546 = EDGE_LOOP('',(#42547,#42548,#42549,#42550)); +#42547 = ORIENTED_EDGE('',*,*,#41295,.T.); +#42548 = ORIENTED_EDGE('',*,*,#41602,.T.); +#42549 = ORIENTED_EDGE('',*,*,#41404,.F.); +#42550 = ORIENTED_EDGE('',*,*,#42551,.F.); +#42551 = EDGE_CURVE('',#41288,#41397,#42552,.T.); +#42552 = LINE('',#42553,#42554); +#42553 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533)); +#42554 = VECTOR('',#42555,1.); +#42555 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42556 = CYLINDRICAL_SURFACE('',#42557,0.3); +#42557 = AXIS2_PLACEMENT_3D('',#42558,#42559,#42560); +#42558 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#42559 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42560 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#42561 = ADVANCED_FACE('',(#42562),#42573,.F.); +#42562 = FACE_BOUND('',#42563,.F.); +#42563 = EDGE_LOOP('',(#42564,#42570,#42571,#42572)); +#42564 = ORIENTED_EDGE('',*,*,#42565,.T.); +#42565 = EDGE_CURVE('',#41279,#41388,#42566,.T.); +#42566 = LINE('',#42567,#42568); +#42567 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#42568 = VECTOR('',#42569,1.); +#42569 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42570 = ORIENTED_EDGE('',*,*,#41396,.T.); +#42571 = ORIENTED_EDGE('',*,*,#42551,.F.); +#42572 = ORIENTED_EDGE('',*,*,#41287,.F.); +#42573 = PLANE('',#42574); +#42574 = AXIS2_PLACEMENT_3D('',#42575,#42576,#42577); +#42575 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#42576 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42577 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42578 = ADVANCED_FACE('',(#42579),#42590,.F.); +#42579 = FACE_BOUND('',#42580,.F.); +#42580 = EDGE_LOOP('',(#42581,#42587,#42588,#42589)); +#42581 = ORIENTED_EDGE('',*,*,#42582,.T.); +#42582 = EDGE_CURVE('',#41271,#41380,#42583,.T.); +#42583 = LINE('',#42584,#42585); +#42584 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2)); +#42585 = VECTOR('',#42586,1.); +#42586 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42587 = ORIENTED_EDGE('',*,*,#41387,.T.); +#42588 = ORIENTED_EDGE('',*,*,#42565,.F.); +#42589 = ORIENTED_EDGE('',*,*,#41278,.F.); +#42590 = CYLINDRICAL_SURFACE('',#42591,0.1); +#42591 = AXIS2_PLACEMENT_3D('',#42592,#42593,#42594); +#42592 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#42593 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42594 = DIRECTION('',(0.,0.,-1.)); +#42595 = ADVANCED_FACE('',(#42596),#42607,.F.); +#42596 = FACE_BOUND('',#42597,.F.); +#42597 = EDGE_LOOP('',(#42598,#42604,#42605,#42606)); +#42598 = ORIENTED_EDGE('',*,*,#42599,.T.); +#42599 = EDGE_CURVE('',#41263,#41372,#42600,.T.); +#42600 = LINE('',#42601,#42602); +#42601 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#42602 = VECTOR('',#42603,1.); +#42603 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42604 = ORIENTED_EDGE('',*,*,#41379,.T.); +#42605 = ORIENTED_EDGE('',*,*,#42582,.F.); +#42606 = ORIENTED_EDGE('',*,*,#41270,.F.); +#42607 = PLANE('',#42608); +#42608 = AXIS2_PLACEMENT_3D('',#42609,#42610,#42611); +#42609 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#42610 = DIRECTION('',(0.,0.,-1.)); +#42611 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42612 = ADVANCED_FACE('',(#42613),#42624,.F.); +#42613 = FACE_BOUND('',#42614,.F.); +#42614 = EDGE_LOOP('',(#42615,#42621,#42622,#42623)); +#42615 = ORIENTED_EDGE('',*,*,#42616,.T.); +#42616 = EDGE_CURVE('',#41255,#41364,#42617,.T.); +#42617 = LINE('',#42618,#42619); +#42618 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#42619 = VECTOR('',#42620,1.); +#42620 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42621 = ORIENTED_EDGE('',*,*,#41371,.T.); +#42622 = ORIENTED_EDGE('',*,*,#42599,.F.); +#42623 = ORIENTED_EDGE('',*,*,#41262,.F.); +#42624 = PLANE('',#42625); +#42625 = AXIS2_PLACEMENT_3D('',#42626,#42627,#42628); +#42626 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#42627 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42628 = DIRECTION('',(0.,0.,1.)); +#42629 = ADVANCED_FACE('',(#42630),#42641,.F.); +#42630 = FACE_BOUND('',#42631,.F.); +#42631 = EDGE_LOOP('',(#42632,#42638,#42639,#42640)); +#42632 = ORIENTED_EDGE('',*,*,#42633,.T.); +#42633 = EDGE_CURVE('',#41246,#41355,#42634,.T.); +#42634 = LINE('',#42635,#42636); +#42635 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#42636 = VECTOR('',#42637,1.); +#42637 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42638 = ORIENTED_EDGE('',*,*,#41363,.T.); +#42639 = ORIENTED_EDGE('',*,*,#42616,.F.); +#42640 = ORIENTED_EDGE('',*,*,#41254,.F.); +#42641 = PLANE('',#42642); +#42642 = AXIS2_PLACEMENT_3D('',#42643,#42644,#42645); +#42643 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#42644 = DIRECTION('',(0.,0.,1.)); +#42645 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42646 = ADVANCED_FACE('',(#42647),#42658,.T.); +#42647 = FACE_BOUND('',#42648,.T.); +#42648 = EDGE_LOOP('',(#42649,#42650,#42651,#42652)); +#42649 = ORIENTED_EDGE('',*,*,#41245,.T.); +#42650 = ORIENTED_EDGE('',*,*,#42633,.T.); +#42651 = ORIENTED_EDGE('',*,*,#41354,.F.); +#42652 = ORIENTED_EDGE('',*,*,#42653,.F.); +#42653 = EDGE_CURVE('',#41238,#41347,#42654,.T.); +#42654 = LINE('',#42655,#42656); +#42655 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467)); +#42656 = VECTOR('',#42657,1.); +#42657 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42658 = CYLINDRICAL_SURFACE('',#42659,0.3); +#42659 = AXIS2_PLACEMENT_3D('',#42660,#42661,#42662); +#42660 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#42661 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42662 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42663 = ADVANCED_FACE('',(#42664),#42670,.F.); +#42664 = FACE_BOUND('',#42665,.F.); +#42665 = EDGE_LOOP('',(#42666,#42667,#42668,#42669)); +#42666 = ORIENTED_EDGE('',*,*,#41328,.T.); +#42667 = ORIENTED_EDGE('',*,*,#41346,.T.); +#42668 = ORIENTED_EDGE('',*,*,#42653,.F.); +#42669 = ORIENTED_EDGE('',*,*,#41237,.F.); +#42670 = PLANE('',#42671); +#42671 = AXIS2_PLACEMENT_3D('',#42672,#42673,#42674); +#42672 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#42673 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42674 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42675 = ADVANCED_FACE('',(#42676),#42677,.F.); +#42676 = FACE_BOUND('',#41528,.T.); +#42677 = PLANE('',#42678); +#42678 = AXIS2_PLACEMENT_3D('',#42679,#42680,#42681); +#42679 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.75)); +#42680 = DIRECTION('',(0.,0.,-1.)); +#42681 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#42686)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#42683,#42684,#42685)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#42683 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#42684 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#42685 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#42686 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#42683, + 'distance_accuracy_value','confusion accuracy'); +#42687 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#42688,#42690); +#42688 = ( REPRESENTATION_RELATIONSHIP('','',#38213,#38190) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#42689) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#42689 = ITEM_DEFINED_TRANSFORMATION('','',#11,#38191); +#42690 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #42691); +#42691 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','=>[0:1:1:23]','',#38185, + #38208,$); +#42692 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#38210)); +#42693 = SHAPE_DEFINITION_REPRESENTATION(#42694,#42700); +#42694 = PRODUCT_DEFINITION_SHAPE('','',#42695); +#42695 = PRODUCT_DEFINITION('design','',#42696,#42699); +#42696 = PRODUCT_DEFINITION_FORMATION('','',#42697); +#42697 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#42698)); +#42698 = PRODUCT_CONTEXT('',#2,'mechanical'); +#42699 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#42700 = SHAPE_REPRESENTATION('',(#11,#42701),#42705); +#42701 = AXIS2_PLACEMENT_3D('',#42702,#42703,#42704); +#42702 = CARTESIAN_POINT('',(0.,0.,0.)); +#42703 = DIRECTION('',(0.,0.,1.)); +#42704 = DIRECTION('',(1.,0.,-0.)); +#42705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#42709)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#42706,#42707,#42708)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#42706 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#42707 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#42708 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#42709 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#42706, + 'distance_accuracy_value','confusion accuracy'); +#42710 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#42711,#42713); +#42711 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#42712) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#42712 = ITEM_DEFINED_TRANSFORMATION('','',#11,#91); +#42713 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #42714); +#42714 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','C34','',#5,#42695,$); +#42715 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#42697)); +#42716 = SHAPE_DEFINITION_REPRESENTATION(#42717,#42723); +#42717 = PRODUCT_DEFINITION_SHAPE('','',#42718); +#42718 = PRODUCT_DEFINITION('design','',#42719,#42722); +#42719 = PRODUCT_DEFINITION_FORMATION('','',#42720); +#42720 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#42721)); +#42721 = PRODUCT_CONTEXT('',#2,'mechanical'); +#42722 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#42723 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#42724),#43578); +#42724 = MANIFOLD_SOLID_BREP('',#42725); +#42725 = CLOSED_SHELL('',(#42726,#42802,#42833,#42858,#42883,#42907, + #42931,#42956,#42981,#42998,#43084,#43116,#43140,#43165,#43189, + #43214,#43238,#43263,#43280,#43366,#43397,#43422,#43447,#43471, + #43495,#43520,#43545,#43562)); +#42726 = ADVANCED_FACE('',(#42727),#42797,.F.); +#42727 = FACE_BOUND('',#42728,.F.); +#42728 = EDGE_LOOP('',(#42729,#42739,#42748,#42756,#42765,#42773,#42782, + #42790)); +#42729 = ORIENTED_EDGE('',*,*,#42730,.F.); +#42730 = EDGE_CURVE('',#42731,#42733,#42735,.T.); +#42731 = VERTEX_POINT('',#42732); +#42732 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#42733 = VERTEX_POINT('',#42734); +#42734 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#42735 = LINE('',#42736,#42737); +#42736 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42737 = VECTOR('',#42738,1.); +#42738 = DIRECTION('',(0.,0.,1.)); +#42739 = ORIENTED_EDGE('',*,*,#42740,.T.); +#42740 = EDGE_CURVE('',#42731,#42741,#42743,.T.); +#42741 = VERTEX_POINT('',#42742); +#42742 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#42743 = CIRCLE('',#42744,4.E-02); +#42744 = AXIS2_PLACEMENT_3D('',#42745,#42746,#42747); +#42745 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#42746 = DIRECTION('',(1.,0.,-0.)); +#42747 = DIRECTION('',(0.,0.,1.)); +#42748 = ORIENTED_EDGE('',*,*,#42749,.T.); +#42749 = EDGE_CURVE('',#42741,#42750,#42752,.T.); +#42750 = VERTEX_POINT('',#42751); +#42751 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#42752 = LINE('',#42753,#42754); +#42753 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42754 = VECTOR('',#42755,1.); +#42755 = DIRECTION('',(0.,1.,0.)); +#42756 = ORIENTED_EDGE('',*,*,#42757,.F.); +#42757 = EDGE_CURVE('',#42758,#42750,#42760,.T.); +#42758 = VERTEX_POINT('',#42759); +#42759 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#42760 = CIRCLE('',#42761,4.E-02); +#42761 = AXIS2_PLACEMENT_3D('',#42762,#42763,#42764); +#42762 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#42763 = DIRECTION('',(-1.,0.,0.)); +#42764 = DIRECTION('',(0.,0.,1.)); +#42765 = ORIENTED_EDGE('',*,*,#42766,.T.); +#42766 = EDGE_CURVE('',#42758,#42767,#42769,.T.); +#42767 = VERTEX_POINT('',#42768); +#42768 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#42769 = LINE('',#42770,#42771); +#42770 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#42771 = VECTOR('',#42772,1.); +#42772 = DIRECTION('',(0.,0.,1.)); +#42773 = ORIENTED_EDGE('',*,*,#42774,.T.); +#42774 = EDGE_CURVE('',#42767,#42775,#42777,.T.); +#42775 = VERTEX_POINT('',#42776); +#42776 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#42777 = CIRCLE('',#42778,4.E-02); +#42778 = AXIS2_PLACEMENT_3D('',#42779,#42780,#42781); +#42779 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#42780 = DIRECTION('',(1.,0.,-0.)); +#42781 = DIRECTION('',(0.,0.,1.)); +#42782 = ORIENTED_EDGE('',*,*,#42783,.F.); +#42783 = EDGE_CURVE('',#42784,#42775,#42786,.T.); +#42784 = VERTEX_POINT('',#42785); +#42785 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#42786 = LINE('',#42787,#42788); +#42787 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#42788 = VECTOR('',#42789,1.); +#42789 = DIRECTION('',(0.,1.,0.)); +#42790 = ORIENTED_EDGE('',*,*,#42791,.F.); +#42791 = EDGE_CURVE('',#42733,#42784,#42792,.T.); +#42792 = CIRCLE('',#42793,4.E-02); +#42793 = AXIS2_PLACEMENT_3D('',#42794,#42795,#42796); +#42794 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#42795 = DIRECTION('',(-1.,0.,0.)); +#42796 = DIRECTION('',(0.,0.,1.)); +#42797 = PLANE('',#42798); +#42798 = AXIS2_PLACEMENT_3D('',#42799,#42800,#42801); +#42799 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42800 = DIRECTION('',(1.,0.,0.)); +#42801 = DIRECTION('',(0.,0.,1.)); +#42802 = ADVANCED_FACE('',(#42803),#42828,.F.); +#42803 = FACE_BOUND('',#42804,.F.); +#42804 = EDGE_LOOP('',(#42805,#42815,#42821,#42822)); +#42805 = ORIENTED_EDGE('',*,*,#42806,.F.); +#42806 = EDGE_CURVE('',#42807,#42809,#42811,.T.); +#42807 = VERTEX_POINT('',#42808); +#42808 = CARTESIAN_POINT('',(-0.6,-0.625,4.E-02)); +#42809 = VERTEX_POINT('',#42810); +#42810 = CARTESIAN_POINT('',(-0.6,-0.625,1.21)); +#42811 = LINE('',#42812,#42813); +#42812 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#42813 = VECTOR('',#42814,1.); +#42814 = DIRECTION('',(0.,0.,1.)); +#42815 = ORIENTED_EDGE('',*,*,#42816,.F.); +#42816 = EDGE_CURVE('',#42731,#42807,#42817,.T.); +#42817 = LINE('',#42818,#42819); +#42818 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#42819 = VECTOR('',#42820,1.); +#42820 = DIRECTION('',(1.,0.,0.)); +#42821 = ORIENTED_EDGE('',*,*,#42730,.T.); +#42822 = ORIENTED_EDGE('',*,*,#42823,.T.); +#42823 = EDGE_CURVE('',#42733,#42809,#42824,.T.); +#42824 = LINE('',#42825,#42826); +#42825 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#42826 = VECTOR('',#42827,1.); +#42827 = DIRECTION('',(1.,0.,0.)); +#42828 = PLANE('',#42829); +#42829 = AXIS2_PLACEMENT_3D('',#42830,#42831,#42832); +#42830 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42831 = DIRECTION('',(0.,1.,0.)); +#42832 = DIRECTION('',(0.,-0.,1.)); +#42833 = ADVANCED_FACE('',(#42834),#42853,.T.); +#42834 = FACE_BOUND('',#42835,.T.); +#42835 = EDGE_LOOP('',(#42836,#42837,#42845,#42852)); +#42836 = ORIENTED_EDGE('',*,*,#42740,.T.); +#42837 = ORIENTED_EDGE('',*,*,#42838,.T.); +#42838 = EDGE_CURVE('',#42741,#42839,#42841,.T.); +#42839 = VERTEX_POINT('',#42840); +#42840 = CARTESIAN_POINT('',(-0.6,-0.585,0.)); +#42841 = LINE('',#42842,#42843); +#42842 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#42843 = VECTOR('',#42844,1.); +#42844 = DIRECTION('',(1.,0.,0.)); +#42845 = ORIENTED_EDGE('',*,*,#42846,.F.); +#42846 = EDGE_CURVE('',#42807,#42839,#42847,.T.); +#42847 = CIRCLE('',#42848,4.E-02); +#42848 = AXIS2_PLACEMENT_3D('',#42849,#42850,#42851); +#42849 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#42850 = DIRECTION('',(1.,0.,-0.)); +#42851 = DIRECTION('',(0.,0.,1.)); +#42852 = ORIENTED_EDGE('',*,*,#42816,.F.); +#42853 = CYLINDRICAL_SURFACE('',#42854,4.E-02); +#42854 = AXIS2_PLACEMENT_3D('',#42855,#42856,#42857); +#42855 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#42856 = DIRECTION('',(1.,0.,0.)); +#42857 = DIRECTION('',(0.,-1.,0.)); +#42858 = ADVANCED_FACE('',(#42859),#42878,.T.); +#42859 = FACE_BOUND('',#42860,.T.); +#42860 = EDGE_LOOP('',(#42861,#42862,#42871,#42877)); +#42861 = ORIENTED_EDGE('',*,*,#42823,.T.); +#42862 = ORIENTED_EDGE('',*,*,#42863,.T.); +#42863 = EDGE_CURVE('',#42809,#42864,#42866,.T.); +#42864 = VERTEX_POINT('',#42865); +#42865 = CARTESIAN_POINT('',(-0.6,-0.585,1.25)); +#42866 = CIRCLE('',#42867,4.E-02); +#42867 = AXIS2_PLACEMENT_3D('',#42868,#42869,#42870); +#42868 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#42869 = DIRECTION('',(-1.,0.,0.)); +#42870 = DIRECTION('',(0.,0.,1.)); +#42871 = ORIENTED_EDGE('',*,*,#42872,.F.); +#42872 = EDGE_CURVE('',#42784,#42864,#42873,.T.); +#42873 = LINE('',#42874,#42875); +#42874 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#42875 = VECTOR('',#42876,1.); +#42876 = DIRECTION('',(1.,0.,0.)); +#42877 = ORIENTED_EDGE('',*,*,#42791,.F.); +#42878 = CYLINDRICAL_SURFACE('',#42879,4.E-02); +#42879 = AXIS2_PLACEMENT_3D('',#42880,#42881,#42882); +#42880 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#42881 = DIRECTION('',(1.,0.,0.)); +#42882 = DIRECTION('',(0.,-1.,0.)); +#42883 = ADVANCED_FACE('',(#42884),#42902,.F.); +#42884 = FACE_BOUND('',#42885,.F.); +#42885 = EDGE_LOOP('',(#42886,#42887,#42888,#42896)); +#42886 = ORIENTED_EDGE('',*,*,#42749,.F.); +#42887 = ORIENTED_EDGE('',*,*,#42838,.T.); +#42888 = ORIENTED_EDGE('',*,*,#42889,.T.); +#42889 = EDGE_CURVE('',#42839,#42890,#42892,.T.); +#42890 = VERTEX_POINT('',#42891); +#42891 = CARTESIAN_POINT('',(-0.6,0.585,0.)); +#42892 = LINE('',#42893,#42894); +#42893 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#42894 = VECTOR('',#42895,1.); +#42895 = DIRECTION('',(0.,1.,0.)); +#42896 = ORIENTED_EDGE('',*,*,#42897,.F.); +#42897 = EDGE_CURVE('',#42750,#42890,#42898,.T.); +#42898 = LINE('',#42899,#42900); +#42899 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#42900 = VECTOR('',#42901,1.); +#42901 = DIRECTION('',(1.,0.,0.)); +#42902 = PLANE('',#42903); +#42903 = AXIS2_PLACEMENT_3D('',#42904,#42905,#42906); +#42904 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42905 = DIRECTION('',(0.,0.,1.)); +#42906 = DIRECTION('',(1.,0.,-0.)); +#42907 = ADVANCED_FACE('',(#42908),#42926,.T.); +#42908 = FACE_BOUND('',#42909,.T.); +#42909 = EDGE_LOOP('',(#42910,#42911,#42912,#42920)); +#42910 = ORIENTED_EDGE('',*,*,#42783,.F.); +#42911 = ORIENTED_EDGE('',*,*,#42872,.T.); +#42912 = ORIENTED_EDGE('',*,*,#42913,.T.); +#42913 = EDGE_CURVE('',#42864,#42914,#42916,.T.); +#42914 = VERTEX_POINT('',#42915); +#42915 = CARTESIAN_POINT('',(-0.6,0.585,1.25)); +#42916 = LINE('',#42917,#42918); +#42917 = CARTESIAN_POINT('',(-0.6,-0.625,1.25)); +#42918 = VECTOR('',#42919,1.); +#42919 = DIRECTION('',(0.,1.,0.)); +#42920 = ORIENTED_EDGE('',*,*,#42921,.F.); +#42921 = EDGE_CURVE('',#42775,#42914,#42922,.T.); +#42922 = LINE('',#42923,#42924); +#42923 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#42924 = VECTOR('',#42925,1.); +#42925 = DIRECTION('',(1.,0.,0.)); +#42926 = PLANE('',#42927); +#42927 = AXIS2_PLACEMENT_3D('',#42928,#42929,#42930); +#42928 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#42929 = DIRECTION('',(0.,0.,1.)); +#42930 = DIRECTION('',(1.,0.,-0.)); +#42931 = ADVANCED_FACE('',(#42932),#42951,.T.); +#42932 = FACE_BOUND('',#42933,.T.); +#42933 = EDGE_LOOP('',(#42934,#42942,#42949,#42950)); +#42934 = ORIENTED_EDGE('',*,*,#42935,.T.); +#42935 = EDGE_CURVE('',#42758,#42936,#42938,.T.); +#42936 = VERTEX_POINT('',#42937); +#42937 = CARTESIAN_POINT('',(-0.6,0.625,4.E-02)); +#42938 = LINE('',#42939,#42940); +#42939 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#42940 = VECTOR('',#42941,1.); +#42941 = DIRECTION('',(1.,0.,0.)); +#42942 = ORIENTED_EDGE('',*,*,#42943,.T.); +#42943 = EDGE_CURVE('',#42936,#42890,#42944,.T.); +#42944 = CIRCLE('',#42945,4.E-02); +#42945 = AXIS2_PLACEMENT_3D('',#42946,#42947,#42948); +#42946 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#42947 = DIRECTION('',(-1.,0.,0.)); +#42948 = DIRECTION('',(0.,0.,1.)); +#42949 = ORIENTED_EDGE('',*,*,#42897,.F.); +#42950 = ORIENTED_EDGE('',*,*,#42757,.F.); +#42951 = CYLINDRICAL_SURFACE('',#42952,4.E-02); +#42952 = AXIS2_PLACEMENT_3D('',#42953,#42954,#42955); +#42953 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#42954 = DIRECTION('',(1.,0.,0.)); +#42955 = DIRECTION('',(-0.,1.,0.)); +#42956 = ADVANCED_FACE('',(#42957),#42976,.T.); +#42957 = FACE_BOUND('',#42958,.T.); +#42958 = EDGE_LOOP('',(#42959,#42960,#42961,#42970)); +#42959 = ORIENTED_EDGE('',*,*,#42774,.T.); +#42960 = ORIENTED_EDGE('',*,*,#42921,.T.); +#42961 = ORIENTED_EDGE('',*,*,#42962,.F.); +#42962 = EDGE_CURVE('',#42963,#42914,#42965,.T.); +#42963 = VERTEX_POINT('',#42964); +#42964 = CARTESIAN_POINT('',(-0.6,0.625,1.21)); +#42965 = CIRCLE('',#42966,4.E-02); +#42966 = AXIS2_PLACEMENT_3D('',#42967,#42968,#42969); +#42967 = CARTESIAN_POINT('',(-0.6,0.585,1.21)); +#42968 = DIRECTION('',(1.,0.,-0.)); +#42969 = DIRECTION('',(0.,0.,1.)); +#42970 = ORIENTED_EDGE('',*,*,#42971,.F.); +#42971 = EDGE_CURVE('',#42767,#42963,#42972,.T.); +#42972 = LINE('',#42973,#42974); +#42973 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#42974 = VECTOR('',#42975,1.); +#42975 = DIRECTION('',(1.,0.,0.)); +#42976 = CYLINDRICAL_SURFACE('',#42977,4.E-02); +#42977 = AXIS2_PLACEMENT_3D('',#42978,#42979,#42980); +#42978 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#42979 = DIRECTION('',(1.,0.,0.)); +#42980 = DIRECTION('',(-0.,1.,0.)); +#42981 = ADVANCED_FACE('',(#42982),#42993,.T.); +#42982 = FACE_BOUND('',#42983,.T.); +#42983 = EDGE_LOOP('',(#42984,#42990,#42991,#42992)); +#42984 = ORIENTED_EDGE('',*,*,#42985,.F.); +#42985 = EDGE_CURVE('',#42936,#42963,#42986,.T.); +#42986 = LINE('',#42987,#42988); +#42987 = CARTESIAN_POINT('',(-0.6,0.625,0.)); +#42988 = VECTOR('',#42989,1.); +#42989 = DIRECTION('',(0.,0.,1.)); +#42990 = ORIENTED_EDGE('',*,*,#42935,.F.); +#42991 = ORIENTED_EDGE('',*,*,#42766,.T.); +#42992 = ORIENTED_EDGE('',*,*,#42971,.T.); +#42993 = PLANE('',#42994); +#42994 = AXIS2_PLACEMENT_3D('',#42995,#42996,#42997); +#42995 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#42996 = DIRECTION('',(0.,1.,0.)); +#42997 = DIRECTION('',(0.,-0.,1.)); +#42998 = ADVANCED_FACE('',(#42999,#43009),#43079,.T.); +#42999 = FACE_BOUND('',#43000,.T.); +#43000 = EDGE_LOOP('',(#43001,#43002,#43003,#43004,#43005,#43006,#43007, + #43008)); +#43001 = ORIENTED_EDGE('',*,*,#42806,.F.); +#43002 = ORIENTED_EDGE('',*,*,#42846,.T.); +#43003 = ORIENTED_EDGE('',*,*,#42889,.T.); +#43004 = ORIENTED_EDGE('',*,*,#42943,.F.); +#43005 = ORIENTED_EDGE('',*,*,#42985,.T.); +#43006 = ORIENTED_EDGE('',*,*,#42962,.T.); +#43007 = ORIENTED_EDGE('',*,*,#42913,.F.); +#43008 = ORIENTED_EDGE('',*,*,#42863,.F.); +#43009 = FACE_BOUND('',#43010,.T.); +#43010 = EDGE_LOOP('',(#43011,#43022,#43030,#43039,#43047,#43056,#43064, + #43073)); +#43011 = ORIENTED_EDGE('',*,*,#43012,.F.); +#43012 = EDGE_CURVE('',#43013,#43015,#43017,.T.); +#43013 = VERTEX_POINT('',#43014); +#43014 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#43015 = VERTEX_POINT('',#43016); +#43016 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#43017 = CIRCLE('',#43018,4.E-02); +#43018 = AXIS2_PLACEMENT_3D('',#43019,#43020,#43021); +#43019 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#43020 = DIRECTION('',(1.,0.,-0.)); +#43021 = DIRECTION('',(0.,0.,1.)); +#43022 = ORIENTED_EDGE('',*,*,#43023,.T.); +#43023 = EDGE_CURVE('',#43013,#43024,#43026,.T.); +#43024 = VERTEX_POINT('',#43025); +#43025 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#43026 = LINE('',#43027,#43028); +#43027 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43028 = VECTOR('',#43029,1.); +#43029 = DIRECTION('',(0.,0.,1.)); +#43030 = ORIENTED_EDGE('',*,*,#43031,.T.); +#43031 = EDGE_CURVE('',#43024,#43032,#43034,.T.); +#43032 = VERTEX_POINT('',#43033); +#43033 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#43034 = CIRCLE('',#43035,4.E-02); +#43035 = AXIS2_PLACEMENT_3D('',#43036,#43037,#43038); +#43036 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#43037 = DIRECTION('',(-1.,0.,0.)); +#43038 = DIRECTION('',(0.,0.,1.)); +#43039 = ORIENTED_EDGE('',*,*,#43040,.T.); +#43040 = EDGE_CURVE('',#43032,#43041,#43043,.T.); +#43041 = VERTEX_POINT('',#43042); +#43042 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#43043 = LINE('',#43044,#43045); +#43044 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#43045 = VECTOR('',#43046,1.); +#43046 = DIRECTION('',(0.,1.,0.)); +#43047 = ORIENTED_EDGE('',*,*,#43048,.F.); +#43048 = EDGE_CURVE('',#43049,#43041,#43051,.T.); +#43049 = VERTEX_POINT('',#43050); +#43050 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#43051 = CIRCLE('',#43052,4.E-02); +#43052 = AXIS2_PLACEMENT_3D('',#43053,#43054,#43055); +#43053 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#43054 = DIRECTION('',(1.,0.,-0.)); +#43055 = DIRECTION('',(0.,0.,1.)); +#43056 = ORIENTED_EDGE('',*,*,#43057,.F.); +#43057 = EDGE_CURVE('',#43058,#43049,#43060,.T.); +#43058 = VERTEX_POINT('',#43059); +#43059 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#43060 = LINE('',#43061,#43062); +#43061 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#43062 = VECTOR('',#43063,1.); +#43063 = DIRECTION('',(0.,0.,1.)); +#43064 = ORIENTED_EDGE('',*,*,#43065,.T.); +#43065 = EDGE_CURVE('',#43058,#43066,#43068,.T.); +#43066 = VERTEX_POINT('',#43067); +#43067 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#43068 = CIRCLE('',#43069,4.E-02); +#43069 = AXIS2_PLACEMENT_3D('',#43070,#43071,#43072); +#43070 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#43071 = DIRECTION('',(-1.,0.,0.)); +#43072 = DIRECTION('',(0.,0.,1.)); +#43073 = ORIENTED_EDGE('',*,*,#43074,.F.); +#43074 = EDGE_CURVE('',#43015,#43066,#43075,.T.); +#43075 = LINE('',#43076,#43077); +#43076 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43077 = VECTOR('',#43078,1.); +#43078 = DIRECTION('',(0.,1.,0.)); +#43079 = PLANE('',#43080); +#43080 = AXIS2_PLACEMENT_3D('',#43081,#43082,#43083); +#43081 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#43082 = DIRECTION('',(1.,0.,0.)); +#43083 = DIRECTION('',(0.,0.,1.)); +#43084 = ADVANCED_FACE('',(#43085),#43111,.T.); +#43085 = FACE_BOUND('',#43086,.T.); +#43086 = EDGE_LOOP('',(#43087,#43088,#43096,#43105)); +#43087 = ORIENTED_EDGE('',*,*,#43012,.T.); +#43088 = ORIENTED_EDGE('',*,*,#43089,.T.); +#43089 = EDGE_CURVE('',#43015,#43090,#43092,.T.); +#43090 = VERTEX_POINT('',#43091); +#43091 = CARTESIAN_POINT('',(0.6,-0.545,4.E-02)); +#43092 = LINE('',#43093,#43094); +#43093 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#43094 = VECTOR('',#43095,1.); +#43095 = DIRECTION('',(1.,0.,0.)); +#43096 = ORIENTED_EDGE('',*,*,#43097,.F.); +#43097 = EDGE_CURVE('',#43098,#43090,#43100,.T.); +#43098 = VERTEX_POINT('',#43099); +#43099 = CARTESIAN_POINT('',(0.6,-0.585,8.E-02)); +#43100 = CIRCLE('',#43101,4.E-02); +#43101 = AXIS2_PLACEMENT_3D('',#43102,#43103,#43104); +#43102 = CARTESIAN_POINT('',(0.6,-0.545,8.E-02)); +#43103 = DIRECTION('',(1.,0.,-0.)); +#43104 = DIRECTION('',(0.,0.,1.)); +#43105 = ORIENTED_EDGE('',*,*,#43106,.F.); +#43106 = EDGE_CURVE('',#43013,#43098,#43107,.T.); +#43107 = LINE('',#43108,#43109); +#43108 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#43109 = VECTOR('',#43110,1.); +#43110 = DIRECTION('',(1.,0.,0.)); +#43111 = CYLINDRICAL_SURFACE('',#43112,4.E-02); +#43112 = AXIS2_PLACEMENT_3D('',#43113,#43114,#43115); +#43113 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#43114 = DIRECTION('',(1.,0.,0.)); +#43115 = DIRECTION('',(0.,-1.,0.)); +#43116 = ADVANCED_FACE('',(#43117),#43135,.F.); +#43117 = FACE_BOUND('',#43118,.F.); +#43118 = EDGE_LOOP('',(#43119,#43120,#43121,#43129)); +#43119 = ORIENTED_EDGE('',*,*,#43074,.F.); +#43120 = ORIENTED_EDGE('',*,*,#43089,.T.); +#43121 = ORIENTED_EDGE('',*,*,#43122,.T.); +#43122 = EDGE_CURVE('',#43090,#43123,#43125,.T.); +#43123 = VERTEX_POINT('',#43124); +#43124 = CARTESIAN_POINT('',(0.6,0.545,4.E-02)); +#43125 = LINE('',#43126,#43127); +#43126 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43127 = VECTOR('',#43128,1.); +#43128 = DIRECTION('',(0.,1.,0.)); +#43129 = ORIENTED_EDGE('',*,*,#43130,.F.); +#43130 = EDGE_CURVE('',#43066,#43123,#43131,.T.); +#43131 = LINE('',#43132,#43133); +#43132 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#43133 = VECTOR('',#43134,1.); +#43134 = DIRECTION('',(1.,0.,0.)); +#43135 = PLANE('',#43136); +#43136 = AXIS2_PLACEMENT_3D('',#43137,#43138,#43139); +#43137 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43138 = DIRECTION('',(0.,0.,1.)); +#43139 = DIRECTION('',(1.,0.,-0.)); +#43140 = ADVANCED_FACE('',(#43141),#43160,.T.); +#43141 = FACE_BOUND('',#43142,.T.); +#43142 = EDGE_LOOP('',(#43143,#43151,#43158,#43159)); +#43143 = ORIENTED_EDGE('',*,*,#43144,.T.); +#43144 = EDGE_CURVE('',#43058,#43145,#43147,.T.); +#43145 = VERTEX_POINT('',#43146); +#43146 = CARTESIAN_POINT('',(0.6,0.585,8.E-02)); +#43147 = LINE('',#43148,#43149); +#43148 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#43149 = VECTOR('',#43150,1.); +#43150 = DIRECTION('',(1.,0.,0.)); +#43151 = ORIENTED_EDGE('',*,*,#43152,.T.); +#43152 = EDGE_CURVE('',#43145,#43123,#43153,.T.); +#43153 = CIRCLE('',#43154,4.E-02); +#43154 = AXIS2_PLACEMENT_3D('',#43155,#43156,#43157); +#43155 = CARTESIAN_POINT('',(0.6,0.545,8.E-02)); +#43156 = DIRECTION('',(-1.,0.,0.)); +#43157 = DIRECTION('',(0.,0.,1.)); +#43158 = ORIENTED_EDGE('',*,*,#43130,.F.); +#43159 = ORIENTED_EDGE('',*,*,#43065,.F.); +#43160 = CYLINDRICAL_SURFACE('',#43161,4.E-02); +#43161 = AXIS2_PLACEMENT_3D('',#43162,#43163,#43164); +#43162 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#43163 = DIRECTION('',(1.,0.,0.)); +#43164 = DIRECTION('',(-0.,1.,0.)); +#43165 = ADVANCED_FACE('',(#43166),#43184,.T.); +#43166 = FACE_BOUND('',#43167,.T.); +#43167 = EDGE_LOOP('',(#43168,#43176,#43177,#43178)); +#43168 = ORIENTED_EDGE('',*,*,#43169,.F.); +#43169 = EDGE_CURVE('',#43145,#43170,#43172,.T.); +#43170 = VERTEX_POINT('',#43171); +#43171 = CARTESIAN_POINT('',(0.6,0.585,1.17)); +#43172 = LINE('',#43173,#43174); +#43173 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#43174 = VECTOR('',#43175,1.); +#43175 = DIRECTION('',(0.,0.,1.)); +#43176 = ORIENTED_EDGE('',*,*,#43144,.F.); +#43177 = ORIENTED_EDGE('',*,*,#43057,.T.); +#43178 = ORIENTED_EDGE('',*,*,#43179,.T.); +#43179 = EDGE_CURVE('',#43049,#43170,#43180,.T.); +#43180 = LINE('',#43181,#43182); +#43181 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#43182 = VECTOR('',#43183,1.); +#43183 = DIRECTION('',(1.,0.,0.)); +#43184 = PLANE('',#43185); +#43185 = AXIS2_PLACEMENT_3D('',#43186,#43187,#43188); +#43186 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#43187 = DIRECTION('',(0.,1.,0.)); +#43188 = DIRECTION('',(0.,-0.,1.)); +#43189 = ADVANCED_FACE('',(#43190),#43209,.T.); +#43190 = FACE_BOUND('',#43191,.T.); +#43191 = EDGE_LOOP('',(#43192,#43193,#43201,#43208)); +#43192 = ORIENTED_EDGE('',*,*,#43048,.T.); +#43193 = ORIENTED_EDGE('',*,*,#43194,.T.); +#43194 = EDGE_CURVE('',#43041,#43195,#43197,.T.); +#43195 = VERTEX_POINT('',#43196); +#43196 = CARTESIAN_POINT('',(0.6,0.545,1.21)); +#43197 = LINE('',#43198,#43199); +#43198 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#43199 = VECTOR('',#43200,1.); +#43200 = DIRECTION('',(1.,0.,0.)); +#43201 = ORIENTED_EDGE('',*,*,#43202,.F.); +#43202 = EDGE_CURVE('',#43170,#43195,#43203,.T.); +#43203 = CIRCLE('',#43204,4.E-02); +#43204 = AXIS2_PLACEMENT_3D('',#43205,#43206,#43207); +#43205 = CARTESIAN_POINT('',(0.6,0.545,1.17)); +#43206 = DIRECTION('',(1.,0.,-0.)); +#43207 = DIRECTION('',(0.,0.,1.)); +#43208 = ORIENTED_EDGE('',*,*,#43179,.F.); +#43209 = CYLINDRICAL_SURFACE('',#43210,4.E-02); +#43210 = AXIS2_PLACEMENT_3D('',#43211,#43212,#43213); +#43211 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#43212 = DIRECTION('',(1.,0.,0.)); +#43213 = DIRECTION('',(-0.,1.,0.)); +#43214 = ADVANCED_FACE('',(#43215),#43233,.T.); +#43215 = FACE_BOUND('',#43216,.T.); +#43216 = EDGE_LOOP('',(#43217,#43218,#43226,#43232)); +#43217 = ORIENTED_EDGE('',*,*,#43040,.F.); +#43218 = ORIENTED_EDGE('',*,*,#43219,.T.); +#43219 = EDGE_CURVE('',#43032,#43220,#43222,.T.); +#43220 = VERTEX_POINT('',#43221); +#43221 = CARTESIAN_POINT('',(0.6,-0.545,1.21)); +#43222 = LINE('',#43223,#43224); +#43223 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#43224 = VECTOR('',#43225,1.); +#43225 = DIRECTION('',(1.,0.,0.)); +#43226 = ORIENTED_EDGE('',*,*,#43227,.T.); +#43227 = EDGE_CURVE('',#43220,#43195,#43228,.T.); +#43228 = LINE('',#43229,#43230); +#43229 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#43230 = VECTOR('',#43231,1.); +#43231 = DIRECTION('',(0.,1.,0.)); +#43232 = ORIENTED_EDGE('',*,*,#43194,.F.); +#43233 = PLANE('',#43234); +#43234 = AXIS2_PLACEMENT_3D('',#43235,#43236,#43237); +#43235 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#43236 = DIRECTION('',(0.,0.,1.)); +#43237 = DIRECTION('',(1.,0.,-0.)); +#43238 = ADVANCED_FACE('',(#43239),#43258,.T.); +#43239 = FACE_BOUND('',#43240,.T.); +#43240 = EDGE_LOOP('',(#43241,#43249,#43256,#43257)); +#43241 = ORIENTED_EDGE('',*,*,#43242,.T.); +#43242 = EDGE_CURVE('',#43024,#43243,#43245,.T.); +#43243 = VERTEX_POINT('',#43244); +#43244 = CARTESIAN_POINT('',(0.6,-0.585,1.17)); +#43245 = LINE('',#43246,#43247); +#43246 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#43247 = VECTOR('',#43248,1.); +#43248 = DIRECTION('',(1.,0.,0.)); +#43249 = ORIENTED_EDGE('',*,*,#43250,.T.); +#43250 = EDGE_CURVE('',#43243,#43220,#43251,.T.); +#43251 = CIRCLE('',#43252,4.E-02); +#43252 = AXIS2_PLACEMENT_3D('',#43253,#43254,#43255); +#43253 = CARTESIAN_POINT('',(0.6,-0.545,1.17)); +#43254 = DIRECTION('',(-1.,0.,0.)); +#43255 = DIRECTION('',(0.,0.,1.)); +#43256 = ORIENTED_EDGE('',*,*,#43219,.F.); +#43257 = ORIENTED_EDGE('',*,*,#43031,.F.); +#43258 = CYLINDRICAL_SURFACE('',#43259,4.E-02); +#43259 = AXIS2_PLACEMENT_3D('',#43260,#43261,#43262); +#43260 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#43261 = DIRECTION('',(1.,0.,0.)); +#43262 = DIRECTION('',(0.,-1.,0.)); +#43263 = ADVANCED_FACE('',(#43264),#43275,.F.); +#43264 = FACE_BOUND('',#43265,.F.); +#43265 = EDGE_LOOP('',(#43266,#43272,#43273,#43274)); +#43266 = ORIENTED_EDGE('',*,*,#43267,.F.); +#43267 = EDGE_CURVE('',#43098,#43243,#43268,.T.); +#43268 = LINE('',#43269,#43270); +#43269 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43270 = VECTOR('',#43271,1.); +#43271 = DIRECTION('',(0.,0.,1.)); +#43272 = ORIENTED_EDGE('',*,*,#43106,.F.); +#43273 = ORIENTED_EDGE('',*,*,#43023,.T.); +#43274 = ORIENTED_EDGE('',*,*,#43242,.T.); +#43275 = PLANE('',#43276); +#43276 = AXIS2_PLACEMENT_3D('',#43277,#43278,#43279); +#43277 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43278 = DIRECTION('',(0.,1.,0.)); +#43279 = DIRECTION('',(0.,-0.,1.)); +#43280 = ADVANCED_FACE('',(#43281,#43351),#43361,.F.); +#43281 = FACE_BOUND('',#43282,.F.); +#43282 = EDGE_LOOP('',(#43283,#43293,#43302,#43310,#43319,#43327,#43336, + #43344)); +#43283 = ORIENTED_EDGE('',*,*,#43284,.F.); +#43284 = EDGE_CURVE('',#43285,#43287,#43289,.T.); +#43285 = VERTEX_POINT('',#43286); +#43286 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#43287 = VERTEX_POINT('',#43288); +#43288 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#43289 = LINE('',#43290,#43291); +#43290 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43291 = VECTOR('',#43292,1.); +#43292 = DIRECTION('',(0.,0.,1.)); +#43293 = ORIENTED_EDGE('',*,*,#43294,.T.); +#43294 = EDGE_CURVE('',#43285,#43295,#43297,.T.); +#43295 = VERTEX_POINT('',#43296); +#43296 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#43297 = CIRCLE('',#43298,4.E-02); +#43298 = AXIS2_PLACEMENT_3D('',#43299,#43300,#43301); +#43299 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43300 = DIRECTION('',(1.,0.,-0.)); +#43301 = DIRECTION('',(0.,0.,1.)); +#43302 = ORIENTED_EDGE('',*,*,#43303,.T.); +#43303 = EDGE_CURVE('',#43295,#43304,#43306,.T.); +#43304 = VERTEX_POINT('',#43305); +#43305 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#43306 = LINE('',#43307,#43308); +#43307 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43308 = VECTOR('',#43309,1.); +#43309 = DIRECTION('',(0.,1.,0.)); +#43310 = ORIENTED_EDGE('',*,*,#43311,.F.); +#43311 = EDGE_CURVE('',#43312,#43304,#43314,.T.); +#43312 = VERTEX_POINT('',#43313); +#43313 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#43314 = CIRCLE('',#43315,4.E-02); +#43315 = AXIS2_PLACEMENT_3D('',#43316,#43317,#43318); +#43316 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#43317 = DIRECTION('',(-1.,0.,0.)); +#43318 = DIRECTION('',(0.,0.,1.)); +#43319 = ORIENTED_EDGE('',*,*,#43320,.T.); +#43320 = EDGE_CURVE('',#43312,#43321,#43323,.T.); +#43321 = VERTEX_POINT('',#43322); +#43322 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#43323 = LINE('',#43324,#43325); +#43324 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#43325 = VECTOR('',#43326,1.); +#43326 = DIRECTION('',(0.,0.,1.)); +#43327 = ORIENTED_EDGE('',*,*,#43328,.T.); +#43328 = EDGE_CURVE('',#43321,#43329,#43331,.T.); +#43329 = VERTEX_POINT('',#43330); +#43330 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#43331 = CIRCLE('',#43332,4.E-02); +#43332 = AXIS2_PLACEMENT_3D('',#43333,#43334,#43335); +#43333 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#43334 = DIRECTION('',(1.,0.,-0.)); +#43335 = DIRECTION('',(0.,0.,1.)); +#43336 = ORIENTED_EDGE('',*,*,#43337,.F.); +#43337 = EDGE_CURVE('',#43338,#43329,#43340,.T.); +#43338 = VERTEX_POINT('',#43339); +#43339 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#43340 = LINE('',#43341,#43342); +#43341 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#43342 = VECTOR('',#43343,1.); +#43343 = DIRECTION('',(0.,1.,0.)); +#43344 = ORIENTED_EDGE('',*,*,#43345,.F.); +#43345 = EDGE_CURVE('',#43287,#43338,#43346,.T.); +#43346 = CIRCLE('',#43347,4.E-02); +#43347 = AXIS2_PLACEMENT_3D('',#43348,#43349,#43350); +#43348 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#43349 = DIRECTION('',(-1.,0.,0.)); +#43350 = DIRECTION('',(0.,0.,1.)); +#43351 = FACE_BOUND('',#43352,.F.); +#43352 = EDGE_LOOP('',(#43353,#43354,#43355,#43356,#43357,#43358,#43359, + #43360)); +#43353 = ORIENTED_EDGE('',*,*,#43097,.F.); +#43354 = ORIENTED_EDGE('',*,*,#43267,.T.); +#43355 = ORIENTED_EDGE('',*,*,#43250,.T.); +#43356 = ORIENTED_EDGE('',*,*,#43227,.T.); +#43357 = ORIENTED_EDGE('',*,*,#43202,.F.); +#43358 = ORIENTED_EDGE('',*,*,#43169,.F.); +#43359 = ORIENTED_EDGE('',*,*,#43152,.T.); +#43360 = ORIENTED_EDGE('',*,*,#43122,.F.); +#43361 = PLANE('',#43362); +#43362 = AXIS2_PLACEMENT_3D('',#43363,#43364,#43365); +#43363 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43364 = DIRECTION('',(1.,0.,0.)); +#43365 = DIRECTION('',(0.,0.,1.)); +#43366 = ADVANCED_FACE('',(#43367),#43392,.F.); +#43367 = FACE_BOUND('',#43368,.F.); +#43368 = EDGE_LOOP('',(#43369,#43379,#43385,#43386)); +#43369 = ORIENTED_EDGE('',*,*,#43370,.F.); +#43370 = EDGE_CURVE('',#43371,#43373,#43375,.T.); +#43371 = VERTEX_POINT('',#43372); +#43372 = CARTESIAN_POINT('',(1.,-0.625,4.E-02)); +#43373 = VERTEX_POINT('',#43374); +#43374 = CARTESIAN_POINT('',(1.,-0.625,1.21)); +#43375 = LINE('',#43376,#43377); +#43376 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#43377 = VECTOR('',#43378,1.); +#43378 = DIRECTION('',(0.,0.,1.)); +#43379 = ORIENTED_EDGE('',*,*,#43380,.F.); +#43380 = EDGE_CURVE('',#43285,#43371,#43381,.T.); +#43381 = LINE('',#43382,#43383); +#43382 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#43383 = VECTOR('',#43384,1.); +#43384 = DIRECTION('',(1.,0.,0.)); +#43385 = ORIENTED_EDGE('',*,*,#43284,.T.); +#43386 = ORIENTED_EDGE('',*,*,#43387,.T.); +#43387 = EDGE_CURVE('',#43287,#43373,#43388,.T.); +#43388 = LINE('',#43389,#43390); +#43389 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#43390 = VECTOR('',#43391,1.); +#43391 = DIRECTION('',(1.,0.,0.)); +#43392 = PLANE('',#43393); +#43393 = AXIS2_PLACEMENT_3D('',#43394,#43395,#43396); +#43394 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43395 = DIRECTION('',(0.,1.,0.)); +#43396 = DIRECTION('',(0.,-0.,1.)); +#43397 = ADVANCED_FACE('',(#43398),#43417,.T.); +#43398 = FACE_BOUND('',#43399,.T.); +#43399 = EDGE_LOOP('',(#43400,#43401,#43409,#43416)); +#43400 = ORIENTED_EDGE('',*,*,#43294,.T.); +#43401 = ORIENTED_EDGE('',*,*,#43402,.T.); +#43402 = EDGE_CURVE('',#43295,#43403,#43405,.T.); +#43403 = VERTEX_POINT('',#43404); +#43404 = CARTESIAN_POINT('',(1.,-0.585,0.)); +#43405 = LINE('',#43406,#43407); +#43406 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#43407 = VECTOR('',#43408,1.); +#43408 = DIRECTION('',(1.,0.,0.)); +#43409 = ORIENTED_EDGE('',*,*,#43410,.F.); +#43410 = EDGE_CURVE('',#43371,#43403,#43411,.T.); +#43411 = CIRCLE('',#43412,4.E-02); +#43412 = AXIS2_PLACEMENT_3D('',#43413,#43414,#43415); +#43413 = CARTESIAN_POINT('',(1.,-0.585,4.E-02)); +#43414 = DIRECTION('',(1.,0.,-0.)); +#43415 = DIRECTION('',(0.,0.,1.)); +#43416 = ORIENTED_EDGE('',*,*,#43380,.F.); +#43417 = CYLINDRICAL_SURFACE('',#43418,4.E-02); +#43418 = AXIS2_PLACEMENT_3D('',#43419,#43420,#43421); +#43419 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43420 = DIRECTION('',(1.,0.,0.)); +#43421 = DIRECTION('',(0.,-1.,0.)); +#43422 = ADVANCED_FACE('',(#43423),#43442,.T.); +#43423 = FACE_BOUND('',#43424,.T.); +#43424 = EDGE_LOOP('',(#43425,#43426,#43435,#43441)); +#43425 = ORIENTED_EDGE('',*,*,#43387,.T.); +#43426 = ORIENTED_EDGE('',*,*,#43427,.T.); +#43427 = EDGE_CURVE('',#43373,#43428,#43430,.T.); +#43428 = VERTEX_POINT('',#43429); +#43429 = CARTESIAN_POINT('',(1.,-0.585,1.25)); +#43430 = CIRCLE('',#43431,4.E-02); +#43431 = AXIS2_PLACEMENT_3D('',#43432,#43433,#43434); +#43432 = CARTESIAN_POINT('',(1.,-0.585,1.21)); +#43433 = DIRECTION('',(-1.,0.,0.)); +#43434 = DIRECTION('',(0.,0.,1.)); +#43435 = ORIENTED_EDGE('',*,*,#43436,.F.); +#43436 = EDGE_CURVE('',#43338,#43428,#43437,.T.); +#43437 = LINE('',#43438,#43439); +#43438 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#43439 = VECTOR('',#43440,1.); +#43440 = DIRECTION('',(1.,0.,0.)); +#43441 = ORIENTED_EDGE('',*,*,#43345,.F.); +#43442 = CYLINDRICAL_SURFACE('',#43443,4.E-02); +#43443 = AXIS2_PLACEMENT_3D('',#43444,#43445,#43446); +#43444 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#43445 = DIRECTION('',(1.,0.,0.)); +#43446 = DIRECTION('',(0.,-1.,0.)); +#43447 = ADVANCED_FACE('',(#43448),#43466,.F.); +#43448 = FACE_BOUND('',#43449,.F.); +#43449 = EDGE_LOOP('',(#43450,#43451,#43452,#43460)); +#43450 = ORIENTED_EDGE('',*,*,#43303,.F.); +#43451 = ORIENTED_EDGE('',*,*,#43402,.T.); +#43452 = ORIENTED_EDGE('',*,*,#43453,.T.); +#43453 = EDGE_CURVE('',#43403,#43454,#43456,.T.); +#43454 = VERTEX_POINT('',#43455); +#43455 = CARTESIAN_POINT('',(1.,0.585,0.)); +#43456 = LINE('',#43457,#43458); +#43457 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#43458 = VECTOR('',#43459,1.); +#43459 = DIRECTION('',(0.,1.,0.)); +#43460 = ORIENTED_EDGE('',*,*,#43461,.F.); +#43461 = EDGE_CURVE('',#43304,#43454,#43462,.T.); +#43462 = LINE('',#43463,#43464); +#43463 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#43464 = VECTOR('',#43465,1.); +#43465 = DIRECTION('',(1.,0.,0.)); +#43466 = PLANE('',#43467); +#43467 = AXIS2_PLACEMENT_3D('',#43468,#43469,#43470); +#43468 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43469 = DIRECTION('',(0.,0.,1.)); +#43470 = DIRECTION('',(1.,0.,-0.)); +#43471 = ADVANCED_FACE('',(#43472),#43490,.T.); +#43472 = FACE_BOUND('',#43473,.T.); +#43473 = EDGE_LOOP('',(#43474,#43475,#43476,#43484)); +#43474 = ORIENTED_EDGE('',*,*,#43337,.F.); +#43475 = ORIENTED_EDGE('',*,*,#43436,.T.); +#43476 = ORIENTED_EDGE('',*,*,#43477,.T.); +#43477 = EDGE_CURVE('',#43428,#43478,#43480,.T.); +#43478 = VERTEX_POINT('',#43479); +#43479 = CARTESIAN_POINT('',(1.,0.585,1.25)); +#43480 = LINE('',#43481,#43482); +#43481 = CARTESIAN_POINT('',(1.,-0.625,1.25)); +#43482 = VECTOR('',#43483,1.); +#43483 = DIRECTION('',(0.,1.,0.)); +#43484 = ORIENTED_EDGE('',*,*,#43485,.F.); +#43485 = EDGE_CURVE('',#43329,#43478,#43486,.T.); +#43486 = LINE('',#43487,#43488); +#43487 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#43488 = VECTOR('',#43489,1.); +#43489 = DIRECTION('',(1.,0.,0.)); +#43490 = PLANE('',#43491); +#43491 = AXIS2_PLACEMENT_3D('',#43492,#43493,#43494); +#43492 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#43493 = DIRECTION('',(0.,0.,1.)); +#43494 = DIRECTION('',(1.,0.,-0.)); +#43495 = ADVANCED_FACE('',(#43496),#43515,.T.); +#43496 = FACE_BOUND('',#43497,.T.); +#43497 = EDGE_LOOP('',(#43498,#43506,#43513,#43514)); +#43498 = ORIENTED_EDGE('',*,*,#43499,.T.); +#43499 = EDGE_CURVE('',#43312,#43500,#43502,.T.); +#43500 = VERTEX_POINT('',#43501); +#43501 = CARTESIAN_POINT('',(1.,0.625,4.E-02)); +#43502 = LINE('',#43503,#43504); +#43503 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#43504 = VECTOR('',#43505,1.); +#43505 = DIRECTION('',(1.,0.,0.)); +#43506 = ORIENTED_EDGE('',*,*,#43507,.T.); +#43507 = EDGE_CURVE('',#43500,#43454,#43508,.T.); +#43508 = CIRCLE('',#43509,4.E-02); +#43509 = AXIS2_PLACEMENT_3D('',#43510,#43511,#43512); +#43510 = CARTESIAN_POINT('',(1.,0.585,4.E-02)); +#43511 = DIRECTION('',(-1.,0.,0.)); +#43512 = DIRECTION('',(0.,0.,1.)); +#43513 = ORIENTED_EDGE('',*,*,#43461,.F.); +#43514 = ORIENTED_EDGE('',*,*,#43311,.F.); +#43515 = CYLINDRICAL_SURFACE('',#43516,4.E-02); +#43516 = AXIS2_PLACEMENT_3D('',#43517,#43518,#43519); +#43517 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#43518 = DIRECTION('',(1.,0.,0.)); +#43519 = DIRECTION('',(-0.,1.,0.)); +#43520 = ADVANCED_FACE('',(#43521),#43540,.T.); +#43521 = FACE_BOUND('',#43522,.T.); +#43522 = EDGE_LOOP('',(#43523,#43524,#43525,#43534)); +#43523 = ORIENTED_EDGE('',*,*,#43328,.T.); +#43524 = ORIENTED_EDGE('',*,*,#43485,.T.); +#43525 = ORIENTED_EDGE('',*,*,#43526,.F.); +#43526 = EDGE_CURVE('',#43527,#43478,#43529,.T.); +#43527 = VERTEX_POINT('',#43528); +#43528 = CARTESIAN_POINT('',(1.,0.625,1.21)); +#43529 = CIRCLE('',#43530,4.E-02); +#43530 = AXIS2_PLACEMENT_3D('',#43531,#43532,#43533); +#43531 = CARTESIAN_POINT('',(1.,0.585,1.21)); +#43532 = DIRECTION('',(1.,0.,-0.)); +#43533 = DIRECTION('',(0.,0.,1.)); +#43534 = ORIENTED_EDGE('',*,*,#43535,.F.); +#43535 = EDGE_CURVE('',#43321,#43527,#43536,.T.); +#43536 = LINE('',#43537,#43538); +#43537 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#43538 = VECTOR('',#43539,1.); +#43539 = DIRECTION('',(1.,0.,0.)); +#43540 = CYLINDRICAL_SURFACE('',#43541,4.E-02); +#43541 = AXIS2_PLACEMENT_3D('',#43542,#43543,#43544); +#43542 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#43543 = DIRECTION('',(1.,0.,0.)); +#43544 = DIRECTION('',(-0.,1.,0.)); +#43545 = ADVANCED_FACE('',(#43546),#43557,.T.); +#43546 = FACE_BOUND('',#43547,.T.); +#43547 = EDGE_LOOP('',(#43548,#43554,#43555,#43556)); +#43548 = ORIENTED_EDGE('',*,*,#43549,.F.); +#43549 = EDGE_CURVE('',#43500,#43527,#43550,.T.); +#43550 = LINE('',#43551,#43552); +#43551 = CARTESIAN_POINT('',(1.,0.625,0.)); +#43552 = VECTOR('',#43553,1.); +#43553 = DIRECTION('',(0.,0.,1.)); +#43554 = ORIENTED_EDGE('',*,*,#43499,.F.); +#43555 = ORIENTED_EDGE('',*,*,#43320,.T.); +#43556 = ORIENTED_EDGE('',*,*,#43535,.T.); +#43557 = PLANE('',#43558); +#43558 = AXIS2_PLACEMENT_3D('',#43559,#43560,#43561); +#43559 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#43560 = DIRECTION('',(0.,1.,0.)); +#43561 = DIRECTION('',(0.,-0.,1.)); +#43562 = ADVANCED_FACE('',(#43563),#43573,.T.); +#43563 = FACE_BOUND('',#43564,.T.); +#43564 = EDGE_LOOP('',(#43565,#43566,#43567,#43568,#43569,#43570,#43571, + #43572)); +#43565 = ORIENTED_EDGE('',*,*,#43370,.F.); +#43566 = ORIENTED_EDGE('',*,*,#43410,.T.); +#43567 = ORIENTED_EDGE('',*,*,#43453,.T.); +#43568 = ORIENTED_EDGE('',*,*,#43507,.F.); +#43569 = ORIENTED_EDGE('',*,*,#43549,.T.); +#43570 = ORIENTED_EDGE('',*,*,#43526,.T.); +#43571 = ORIENTED_EDGE('',*,*,#43477,.F.); +#43572 = ORIENTED_EDGE('',*,*,#43427,.F.); +#43573 = PLANE('',#43574); +#43574 = AXIS2_PLACEMENT_3D('',#43575,#43576,#43577); +#43575 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#43576 = DIRECTION('',(1.,0.,0.)); +#43577 = DIRECTION('',(0.,0.,1.)); +#43578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#43582)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#43579,#43580,#43581)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#43579 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#43580 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#43581 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#43582 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#43579, + 'distance_accuracy_value','confusion accuracy'); +#43583 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43584,#43586); +#43584 = ( REPRESENTATION_RELATIONSHIP('','',#42723,#42700) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43585) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43585 = ITEM_DEFINED_TRANSFORMATION('','',#11,#42701); +#43586 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43587); +#43587 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','=>[0:1:1:25]','',#42695, + #42718,$); +#43588 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#42720)); +#43589 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43590,#43592); +#43590 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43591) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43591 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95); +#43592 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43593); +#43593 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','R31','',#5,#523,$); +#43594 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43595,#43597); +#43595 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43596) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43596 = ITEM_DEFINED_TRANSFORMATION('','',#11,#99); +#43597 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43598); +#43598 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','Rfreq2','',#5,#523,$); +#43599 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43600,#43602); +#43600 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43601) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43601 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103); +#43602 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43603); +#43603 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('35','Rmled','',#5,#523,$); +#43604 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43605,#43607); +#43605 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43606) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43606 = ITEM_DEFINED_TRANSFORMATION('','',#11,#107); +#43607 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43608); +#43608 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('36','C40','',#5,#42695,$); +#43609 = SHAPE_DEFINITION_REPRESENTATION(#43610,#43616); +#43610 = PRODUCT_DEFINITION_SHAPE('','',#43611); +#43611 = PRODUCT_DEFINITION('design','',#43612,#43615); +#43612 = PRODUCT_DEFINITION_FORMATION('','',#43613); +#43613 = PRODUCT('PinSocket_1x10_P2.00mm_Vertical', + 'PinSocket_1x10_P2.00mm_Vertical','',(#43614)); +#43614 = PRODUCT_CONTEXT('',#2,'mechanical'); +#43615 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#43616 = SHAPE_REPRESENTATION('',(#11,#43617),#43621); +#43617 = AXIS2_PLACEMENT_3D('',#43618,#43619,#43620); +#43618 = CARTESIAN_POINT('',(0.,0.,0.)); +#43619 = DIRECTION('',(0.,0.,1.)); +#43620 = DIRECTION('',(1.,0.,-0.)); +#43621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#43625)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#43622,#43623,#43624)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#43622 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#43623 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#43624 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#43625 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#43622, + 'distance_accuracy_value','confusion accuracy'); +#43626 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43627,#43629); +#43627 = ( REPRESENTATION_RELATIONSHIP('','',#43616,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43628) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43628 = ITEM_DEFINED_TRANSFORMATION('','',#11,#111); +#43629 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43630); +#43630 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('38','J7','',#5,#43611,$); +#43631 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#43613)); +#43632 = SHAPE_DEFINITION_REPRESENTATION(#43633,#43639); +#43633 = PRODUCT_DEFINITION_SHAPE('','',#43634); +#43634 = PRODUCT_DEFINITION('design','',#43635,#43638); +#43635 = PRODUCT_DEFINITION_FORMATION('','',#43636); +#43636 = PRODUCT('PinSocket_1x10_P2.00mm_Vertical', + 'PinSocket_1x10_P2.00mm_Vertical','',(#43637)); +#43637 = PRODUCT_CONTEXT('',#2,'mechanical'); +#43638 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#43639 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#43640),#51682); +#43640 = MANIFOLD_SOLID_BREP('',#43641); +#43641 = CLOSED_SHELL('',(#43642,#43682,#43745,#43808,#43825,#44182, + #44204,#44221,#44898,#44910,#44922,#44953,#44977,#45001,#45018, + #45049,#45073,#45097,#45114,#45145,#45169,#45193,#45210,#45241, + #45265,#45289,#45306,#45337,#45361,#45385,#45402,#45433,#45457, + #45481,#45498,#45529,#45553,#45577,#45594,#45625,#45649,#45673, + #45690,#45721,#45745,#45769,#45786,#45817,#45841,#45865,#45882, + #45899,#45946,#45963,#46010,#46027,#46074,#46091,#46138,#46155, + #46202,#46219,#46266,#46283,#46330,#46347,#46394,#46411,#46458, + #46475,#46522,#46539,#46586,#46603,#46650,#46667,#46714,#46731, + #46778,#46795,#46842,#46859,#46906,#46923,#46970,#46987,#47034, + #47051,#47098,#47115,#47162,#47193,#47249,#47273,#47322,#47353, + #47409,#47433,#47482,#47513,#47569,#47593,#47642,#47673,#47729, + #47753,#47802,#47833,#47889,#47913,#47962,#47993,#48049,#48073, + #48122,#48153,#48209,#48233,#48282,#48313,#48369,#48393,#48442, + #48473,#48529,#48553,#48602,#48633,#48689,#48713,#48762,#48779, + #48796,#48813,#48830,#48842,#48859,#48876,#48893,#48910,#48922, + #48939,#48956,#48973,#48990,#49002,#49019,#49036,#49053,#49070, + #49082,#49099,#49116,#49133,#49150,#49162,#49179,#49196,#49213, + #49230,#49242,#49259,#49276,#49293,#49310,#49322,#49339,#49356, + #49373,#49390,#49402,#49419,#49436,#49453,#49470,#49482,#49499, + #49516,#49533,#49550,#49562,#49579,#49596,#49645,#49669,#49711, + #49728,#49745,#49762,#49811,#49835,#49877,#49894,#49911,#49928, + #49977,#50001,#50043,#50060,#50077,#50094,#50143,#50167,#50209, + #50226,#50243,#50260,#50309,#50333,#50375,#50392,#50409,#50426, + #50475,#50499,#50541,#50558,#50575,#50592,#50641,#50665,#50707, + #50724,#50741,#50758,#50807,#50831,#50873,#50890,#50907,#50924, + #50973,#50997,#51039,#51056,#51073,#51090,#51139,#51163,#51205, + #51222,#51239,#51256,#51268,#51285,#51302,#51314,#51331,#51348, + #51360,#51377,#51394,#51406,#51423,#51440,#51452,#51469,#51486, + #51498,#51515,#51532,#51544,#51561,#51578,#51590,#51607,#51624, + #51636,#51653,#51670)); +#43642 = ADVANCED_FACE('',(#43643),#43677,.F.); +#43643 = FACE_BOUND('',#43644,.F.); +#43644 = EDGE_LOOP('',(#43645,#43655,#43663,#43671)); +#43645 = ORIENTED_EDGE('',*,*,#43646,.T.); +#43646 = EDGE_CURVE('',#43647,#43649,#43651,.T.); +#43647 = VERTEX_POINT('',#43648); +#43648 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43649 = VERTEX_POINT('',#43650); +#43650 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#43651 = LINE('',#43652,#43653); +#43652 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43653 = VECTOR('',#43654,1.); +#43654 = DIRECTION('',(0.,0.,1.)); +#43655 = ORIENTED_EDGE('',*,*,#43656,.T.); +#43656 = EDGE_CURVE('',#43649,#43657,#43659,.T.); +#43657 = VERTEX_POINT('',#43658); +#43658 = CARTESIAN_POINT('',(1.,1.,5.6)); +#43659 = LINE('',#43660,#43661); +#43660 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#43661 = VECTOR('',#43662,1.); +#43662 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43663 = ORIENTED_EDGE('',*,*,#43664,.F.); +#43664 = EDGE_CURVE('',#43665,#43657,#43667,.T.); +#43665 = VERTEX_POINT('',#43666); +#43666 = CARTESIAN_POINT('',(1.,1.,0.)); +#43667 = LINE('',#43668,#43669); +#43668 = CARTESIAN_POINT('',(1.,1.,0.)); +#43669 = VECTOR('',#43670,1.); +#43670 = DIRECTION('',(0.,0.,1.)); +#43671 = ORIENTED_EDGE('',*,*,#43672,.F.); +#43672 = EDGE_CURVE('',#43647,#43665,#43673,.T.); +#43673 = LINE('',#43674,#43675); +#43674 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43675 = VECTOR('',#43676,1.); +#43676 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43677 = PLANE('',#43678); +#43678 = AXIS2_PLACEMENT_3D('',#43679,#43680,#43681); +#43679 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43680 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43681 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43682 = ADVANCED_FACE('',(#43683),#43740,.F.); +#43683 = FACE_BOUND('',#43684,.F.); +#43684 = EDGE_LOOP('',(#43685,#43695,#43703,#43709,#43710,#43718,#43726, + #43734)); +#43685 = ORIENTED_EDGE('',*,*,#43686,.F.); +#43686 = EDGE_CURVE('',#43687,#43689,#43691,.T.); +#43687 = VERTEX_POINT('',#43688); +#43688 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43689 = VERTEX_POINT('',#43690); +#43690 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.)); +#43691 = LINE('',#43692,#43693); +#43692 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43693 = VECTOR('',#43694,1.); +#43694 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43695 = ORIENTED_EDGE('',*,*,#43696,.T.); +#43696 = EDGE_CURVE('',#43687,#43697,#43699,.T.); +#43697 = VERTEX_POINT('',#43698); +#43698 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#43699 = LINE('',#43700,#43701); +#43700 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43701 = VECTOR('',#43702,1.); +#43702 = DIRECTION('',(0.,0.,1.)); +#43703 = ORIENTED_EDGE('',*,*,#43704,.T.); +#43704 = EDGE_CURVE('',#43697,#43649,#43705,.T.); +#43705 = LINE('',#43706,#43707); +#43706 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#43707 = VECTOR('',#43708,1.); +#43708 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43709 = ORIENTED_EDGE('',*,*,#43646,.F.); +#43710 = ORIENTED_EDGE('',*,*,#43711,.F.); +#43711 = EDGE_CURVE('',#43712,#43647,#43714,.T.); +#43712 = VERTEX_POINT('',#43713); +#43713 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#43714 = LINE('',#43715,#43716); +#43715 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43716 = VECTOR('',#43717,1.); +#43717 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43718 = ORIENTED_EDGE('',*,*,#43719,.T.); +#43719 = EDGE_CURVE('',#43712,#43720,#43722,.T.); +#43720 = VERTEX_POINT('',#43721); +#43721 = CARTESIAN_POINT('',(0.666666666667,-19.,0.2)); +#43722 = LINE('',#43723,#43724); +#43723 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#43724 = VECTOR('',#43725,1.); +#43725 = DIRECTION('',(0.,0.,1.)); +#43726 = ORIENTED_EDGE('',*,*,#43727,.F.); +#43727 = EDGE_CURVE('',#43728,#43720,#43730,.T.); +#43728 = VERTEX_POINT('',#43729); +#43729 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.2)); +#43730 = LINE('',#43731,#43732); +#43731 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.2)); +#43732 = VECTOR('',#43733,1.); +#43733 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43734 = ORIENTED_EDGE('',*,*,#43735,.F.); +#43735 = EDGE_CURVE('',#43689,#43728,#43736,.T.); +#43736 = LINE('',#43737,#43738); +#43737 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.)); +#43738 = VECTOR('',#43739,1.); +#43739 = DIRECTION('',(0.,0.,1.)); +#43740 = PLANE('',#43741); +#43741 = AXIS2_PLACEMENT_3D('',#43742,#43743,#43744); +#43742 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43743 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43744 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43745 = ADVANCED_FACE('',(#43746),#43803,.F.); +#43746 = FACE_BOUND('',#43747,.F.); +#43747 = EDGE_LOOP('',(#43748,#43756,#43757,#43765,#43773,#43781,#43789, + #43797)); +#43748 = ORIENTED_EDGE('',*,*,#43749,.F.); +#43749 = EDGE_CURVE('',#43665,#43750,#43752,.T.); +#43750 = VERTEX_POINT('',#43751); +#43751 = CARTESIAN_POINT('',(0.666666666667,1.,0.)); +#43752 = LINE('',#43753,#43754); +#43753 = CARTESIAN_POINT('',(1.,1.,0.)); +#43754 = VECTOR('',#43755,1.); +#43755 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43756 = ORIENTED_EDGE('',*,*,#43664,.T.); +#43757 = ORIENTED_EDGE('',*,*,#43758,.T.); +#43758 = EDGE_CURVE('',#43657,#43759,#43761,.T.); +#43759 = VERTEX_POINT('',#43760); +#43760 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#43761 = LINE('',#43762,#43763); +#43762 = CARTESIAN_POINT('',(1.,1.,5.6)); +#43763 = VECTOR('',#43764,1.); +#43764 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43765 = ORIENTED_EDGE('',*,*,#43766,.F.); +#43766 = EDGE_CURVE('',#43767,#43759,#43769,.T.); +#43767 = VERTEX_POINT('',#43768); +#43768 = CARTESIAN_POINT('',(-1.,1.,0.)); +#43769 = LINE('',#43770,#43771); +#43770 = CARTESIAN_POINT('',(-1.,1.,0.)); +#43771 = VECTOR('',#43772,1.); +#43772 = DIRECTION('',(0.,0.,1.)); +#43773 = ORIENTED_EDGE('',*,*,#43774,.F.); +#43774 = EDGE_CURVE('',#43775,#43767,#43777,.T.); +#43775 = VERTEX_POINT('',#43776); +#43776 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#43777 = LINE('',#43778,#43779); +#43778 = CARTESIAN_POINT('',(1.,1.,0.)); +#43779 = VECTOR('',#43780,1.); +#43780 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43781 = ORIENTED_EDGE('',*,*,#43782,.T.); +#43782 = EDGE_CURVE('',#43775,#43783,#43785,.T.); +#43783 = VERTEX_POINT('',#43784); +#43784 = CARTESIAN_POINT('',(-0.666666666667,1.,0.2)); +#43785 = LINE('',#43786,#43787); +#43786 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#43787 = VECTOR('',#43788,1.); +#43788 = DIRECTION('',(0.,0.,1.)); +#43789 = ORIENTED_EDGE('',*,*,#43790,.F.); +#43790 = EDGE_CURVE('',#43791,#43783,#43793,.T.); +#43791 = VERTEX_POINT('',#43792); +#43792 = CARTESIAN_POINT('',(0.666666666667,1.,0.2)); +#43793 = LINE('',#43794,#43795); +#43794 = CARTESIAN_POINT('',(0.666666666667,1.,0.2)); +#43795 = VECTOR('',#43796,1.); +#43796 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43797 = ORIENTED_EDGE('',*,*,#43798,.F.); +#43798 = EDGE_CURVE('',#43750,#43791,#43799,.T.); +#43799 = LINE('',#43800,#43801); +#43800 = CARTESIAN_POINT('',(0.666666666667,1.,0.)); +#43801 = VECTOR('',#43802,1.); +#43802 = DIRECTION('',(0.,0.,1.)); +#43803 = PLANE('',#43804); +#43804 = AXIS2_PLACEMENT_3D('',#43805,#43806,#43807); +#43805 = CARTESIAN_POINT('',(1.,1.,0.)); +#43806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43807 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43808 = ADVANCED_FACE('',(#43809),#43820,.F.); +#43809 = FACE_BOUND('',#43810,.F.); +#43810 = EDGE_LOOP('',(#43811,#43812,#43813,#43814)); +#43811 = ORIENTED_EDGE('',*,*,#43711,.T.); +#43812 = ORIENTED_EDGE('',*,*,#43672,.T.); +#43813 = ORIENTED_EDGE('',*,*,#43749,.T.); +#43814 = ORIENTED_EDGE('',*,*,#43815,.F.); +#43815 = EDGE_CURVE('',#43712,#43750,#43816,.T.); +#43816 = LINE('',#43817,#43818); +#43817 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#43818 = VECTOR('',#43819,1.); +#43819 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43820 = PLANE('',#43821); +#43821 = AXIS2_PLACEMENT_3D('',#43822,#43823,#43824); +#43822 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.)); +#43823 = DIRECTION('',(0.,0.,1.)); +#43824 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#43825 = ADVANCED_FACE('',(#43826,#43837,#43871,#43905,#43939,#43973, + #44007,#44041,#44075,#44109,#44143),#44177,.T.); +#43826 = FACE_BOUND('',#43827,.T.); +#43827 = EDGE_LOOP('',(#43828,#43829,#43830,#43836)); +#43828 = ORIENTED_EDGE('',*,*,#43656,.T.); +#43829 = ORIENTED_EDGE('',*,*,#43758,.T.); +#43830 = ORIENTED_EDGE('',*,*,#43831,.T.); +#43831 = EDGE_CURVE('',#43759,#43697,#43832,.T.); +#43832 = LINE('',#43833,#43834); +#43833 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#43834 = VECTOR('',#43835,1.); +#43835 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43836 = ORIENTED_EDGE('',*,*,#43704,.T.); +#43837 = FACE_BOUND('',#43838,.T.); +#43838 = EDGE_LOOP('',(#43839,#43849,#43857,#43865)); +#43839 = ORIENTED_EDGE('',*,*,#43840,.F.); +#43840 = EDGE_CURVE('',#43841,#43843,#43845,.T.); +#43841 = VERTEX_POINT('',#43842); +#43842 = CARTESIAN_POINT('',(0.6,-18.6,5.6)); +#43843 = VERTEX_POINT('',#43844); +#43844 = CARTESIAN_POINT('',(0.6,-17.4,5.6)); +#43845 = LINE('',#43846,#43847); +#43846 = CARTESIAN_POINT('',(0.6,-18.6,5.6)); +#43847 = VECTOR('',#43848,1.); +#43848 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43849 = ORIENTED_EDGE('',*,*,#43850,.F.); +#43850 = EDGE_CURVE('',#43851,#43841,#43853,.T.); +#43851 = VERTEX_POINT('',#43852); +#43852 = CARTESIAN_POINT('',(-0.6,-18.6,5.6)); +#43853 = LINE('',#43854,#43855); +#43854 = CARTESIAN_POINT('',(-0.6,-18.6,5.6)); +#43855 = VECTOR('',#43856,1.); +#43856 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43857 = ORIENTED_EDGE('',*,*,#43858,.F.); +#43858 = EDGE_CURVE('',#43859,#43851,#43861,.T.); +#43859 = VERTEX_POINT('',#43860); +#43860 = CARTESIAN_POINT('',(-0.6,-17.4,5.6)); +#43861 = LINE('',#43862,#43863); +#43862 = CARTESIAN_POINT('',(-0.6,-17.4,5.6)); +#43863 = VECTOR('',#43864,1.); +#43864 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43865 = ORIENTED_EDGE('',*,*,#43866,.F.); +#43866 = EDGE_CURVE('',#43843,#43859,#43867,.T.); +#43867 = LINE('',#43868,#43869); +#43868 = CARTESIAN_POINT('',(0.6,-17.4,5.6)); +#43869 = VECTOR('',#43870,1.); +#43870 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43871 = FACE_BOUND('',#43872,.T.); +#43872 = EDGE_LOOP('',(#43873,#43883,#43891,#43899)); +#43873 = ORIENTED_EDGE('',*,*,#43874,.F.); +#43874 = EDGE_CURVE('',#43875,#43877,#43879,.T.); +#43875 = VERTEX_POINT('',#43876); +#43876 = CARTESIAN_POINT('',(0.6,-16.6,5.6)); +#43877 = VERTEX_POINT('',#43878); +#43878 = CARTESIAN_POINT('',(0.6,-15.4,5.6)); +#43879 = LINE('',#43880,#43881); +#43880 = CARTESIAN_POINT('',(0.6,-16.6,5.6)); +#43881 = VECTOR('',#43882,1.); +#43882 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43883 = ORIENTED_EDGE('',*,*,#43884,.F.); +#43884 = EDGE_CURVE('',#43885,#43875,#43887,.T.); +#43885 = VERTEX_POINT('',#43886); +#43886 = CARTESIAN_POINT('',(-0.6,-16.6,5.6)); +#43887 = LINE('',#43888,#43889); +#43888 = CARTESIAN_POINT('',(-0.6,-16.6,5.6)); +#43889 = VECTOR('',#43890,1.); +#43890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43891 = ORIENTED_EDGE('',*,*,#43892,.F.); +#43892 = EDGE_CURVE('',#43893,#43885,#43895,.T.); +#43893 = VERTEX_POINT('',#43894); +#43894 = CARTESIAN_POINT('',(-0.6,-15.4,5.6)); +#43895 = LINE('',#43896,#43897); +#43896 = CARTESIAN_POINT('',(-0.6,-15.4,5.6)); +#43897 = VECTOR('',#43898,1.); +#43898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43899 = ORIENTED_EDGE('',*,*,#43900,.F.); +#43900 = EDGE_CURVE('',#43877,#43893,#43901,.T.); +#43901 = LINE('',#43902,#43903); +#43902 = CARTESIAN_POINT('',(0.6,-15.4,5.6)); +#43903 = VECTOR('',#43904,1.); +#43904 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43905 = FACE_BOUND('',#43906,.T.); +#43906 = EDGE_LOOP('',(#43907,#43917,#43925,#43933)); +#43907 = ORIENTED_EDGE('',*,*,#43908,.F.); +#43908 = EDGE_CURVE('',#43909,#43911,#43913,.T.); +#43909 = VERTEX_POINT('',#43910); +#43910 = CARTESIAN_POINT('',(0.6,-14.6,5.6)); +#43911 = VERTEX_POINT('',#43912); +#43912 = CARTESIAN_POINT('',(0.6,-13.4,5.6)); +#43913 = LINE('',#43914,#43915); +#43914 = CARTESIAN_POINT('',(0.6,-14.6,5.6)); +#43915 = VECTOR('',#43916,1.); +#43916 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43917 = ORIENTED_EDGE('',*,*,#43918,.F.); +#43918 = EDGE_CURVE('',#43919,#43909,#43921,.T.); +#43919 = VERTEX_POINT('',#43920); +#43920 = CARTESIAN_POINT('',(-0.6,-14.6,5.6)); +#43921 = LINE('',#43922,#43923); +#43922 = CARTESIAN_POINT('',(-0.6,-14.6,5.6)); +#43923 = VECTOR('',#43924,1.); +#43924 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43925 = ORIENTED_EDGE('',*,*,#43926,.F.); +#43926 = EDGE_CURVE('',#43927,#43919,#43929,.T.); +#43927 = VERTEX_POINT('',#43928); +#43928 = CARTESIAN_POINT('',(-0.6,-13.4,5.6)); +#43929 = LINE('',#43930,#43931); +#43930 = CARTESIAN_POINT('',(-0.6,-13.4,5.6)); +#43931 = VECTOR('',#43932,1.); +#43932 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43933 = ORIENTED_EDGE('',*,*,#43934,.F.); +#43934 = EDGE_CURVE('',#43911,#43927,#43935,.T.); +#43935 = LINE('',#43936,#43937); +#43936 = CARTESIAN_POINT('',(0.6,-13.4,5.6)); +#43937 = VECTOR('',#43938,1.); +#43938 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43939 = FACE_BOUND('',#43940,.T.); +#43940 = EDGE_LOOP('',(#43941,#43951,#43959,#43967)); +#43941 = ORIENTED_EDGE('',*,*,#43942,.F.); +#43942 = EDGE_CURVE('',#43943,#43945,#43947,.T.); +#43943 = VERTEX_POINT('',#43944); +#43944 = CARTESIAN_POINT('',(0.6,-12.6,5.6)); +#43945 = VERTEX_POINT('',#43946); +#43946 = CARTESIAN_POINT('',(0.6,-11.4,5.6)); +#43947 = LINE('',#43948,#43949); +#43948 = CARTESIAN_POINT('',(0.6,-12.6,5.6)); +#43949 = VECTOR('',#43950,1.); +#43950 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43951 = ORIENTED_EDGE('',*,*,#43952,.F.); +#43952 = EDGE_CURVE('',#43953,#43943,#43955,.T.); +#43953 = VERTEX_POINT('',#43954); +#43954 = CARTESIAN_POINT('',(-0.6,-12.6,5.6)); +#43955 = LINE('',#43956,#43957); +#43956 = CARTESIAN_POINT('',(-0.6,-12.6,5.6)); +#43957 = VECTOR('',#43958,1.); +#43958 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43959 = ORIENTED_EDGE('',*,*,#43960,.F.); +#43960 = EDGE_CURVE('',#43961,#43953,#43963,.T.); +#43961 = VERTEX_POINT('',#43962); +#43962 = CARTESIAN_POINT('',(-0.6,-11.4,5.6)); +#43963 = LINE('',#43964,#43965); +#43964 = CARTESIAN_POINT('',(-0.6,-11.4,5.6)); +#43965 = VECTOR('',#43966,1.); +#43966 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43967 = ORIENTED_EDGE('',*,*,#43968,.F.); +#43968 = EDGE_CURVE('',#43945,#43961,#43969,.T.); +#43969 = LINE('',#43970,#43971); +#43970 = CARTESIAN_POINT('',(0.6,-11.4,5.6)); +#43971 = VECTOR('',#43972,1.); +#43972 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43973 = FACE_BOUND('',#43974,.T.); +#43974 = EDGE_LOOP('',(#43975,#43985,#43993,#44001)); +#43975 = ORIENTED_EDGE('',*,*,#43976,.F.); +#43976 = EDGE_CURVE('',#43977,#43979,#43981,.T.); +#43977 = VERTEX_POINT('',#43978); +#43978 = CARTESIAN_POINT('',(0.6,-10.6,5.6)); +#43979 = VERTEX_POINT('',#43980); +#43980 = CARTESIAN_POINT('',(0.6,-9.4,5.6)); +#43981 = LINE('',#43982,#43983); +#43982 = CARTESIAN_POINT('',(0.6,-10.6,5.6)); +#43983 = VECTOR('',#43984,1.); +#43984 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43985 = ORIENTED_EDGE('',*,*,#43986,.F.); +#43986 = EDGE_CURVE('',#43987,#43977,#43989,.T.); +#43987 = VERTEX_POINT('',#43988); +#43988 = CARTESIAN_POINT('',(-0.6,-10.6,5.6)); +#43989 = LINE('',#43990,#43991); +#43990 = CARTESIAN_POINT('',(-0.6,-10.6,5.6)); +#43991 = VECTOR('',#43992,1.); +#43992 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43993 = ORIENTED_EDGE('',*,*,#43994,.F.); +#43994 = EDGE_CURVE('',#43995,#43987,#43997,.T.); +#43995 = VERTEX_POINT('',#43996); +#43996 = CARTESIAN_POINT('',(-0.6,-9.4,5.6)); +#43997 = LINE('',#43998,#43999); +#43998 = CARTESIAN_POINT('',(-0.6,-9.4,5.6)); +#43999 = VECTOR('',#44000,1.); +#44000 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44001 = ORIENTED_EDGE('',*,*,#44002,.F.); +#44002 = EDGE_CURVE('',#43979,#43995,#44003,.T.); +#44003 = LINE('',#44004,#44005); +#44004 = CARTESIAN_POINT('',(0.6,-9.4,5.6)); +#44005 = VECTOR('',#44006,1.); +#44006 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44007 = FACE_BOUND('',#44008,.T.); +#44008 = EDGE_LOOP('',(#44009,#44019,#44027,#44035)); +#44009 = ORIENTED_EDGE('',*,*,#44010,.F.); +#44010 = EDGE_CURVE('',#44011,#44013,#44015,.T.); +#44011 = VERTEX_POINT('',#44012); +#44012 = CARTESIAN_POINT('',(0.6,-8.6,5.6)); +#44013 = VERTEX_POINT('',#44014); +#44014 = CARTESIAN_POINT('',(0.6,-7.4,5.6)); +#44015 = LINE('',#44016,#44017); +#44016 = CARTESIAN_POINT('',(0.6,-8.6,5.6)); +#44017 = VECTOR('',#44018,1.); +#44018 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44019 = ORIENTED_EDGE('',*,*,#44020,.F.); +#44020 = EDGE_CURVE('',#44021,#44011,#44023,.T.); +#44021 = VERTEX_POINT('',#44022); +#44022 = CARTESIAN_POINT('',(-0.6,-8.6,5.6)); +#44023 = LINE('',#44024,#44025); +#44024 = CARTESIAN_POINT('',(-0.6,-8.6,5.6)); +#44025 = VECTOR('',#44026,1.); +#44026 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44027 = ORIENTED_EDGE('',*,*,#44028,.F.); +#44028 = EDGE_CURVE('',#44029,#44021,#44031,.T.); +#44029 = VERTEX_POINT('',#44030); +#44030 = CARTESIAN_POINT('',(-0.6,-7.4,5.6)); +#44031 = LINE('',#44032,#44033); +#44032 = CARTESIAN_POINT('',(-0.6,-7.4,5.6)); +#44033 = VECTOR('',#44034,1.); +#44034 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44035 = ORIENTED_EDGE('',*,*,#44036,.F.); +#44036 = EDGE_CURVE('',#44013,#44029,#44037,.T.); +#44037 = LINE('',#44038,#44039); +#44038 = CARTESIAN_POINT('',(0.6,-7.4,5.6)); +#44039 = VECTOR('',#44040,1.); +#44040 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44041 = FACE_BOUND('',#44042,.T.); +#44042 = EDGE_LOOP('',(#44043,#44053,#44061,#44069)); +#44043 = ORIENTED_EDGE('',*,*,#44044,.F.); +#44044 = EDGE_CURVE('',#44045,#44047,#44049,.T.); +#44045 = VERTEX_POINT('',#44046); +#44046 = CARTESIAN_POINT('',(0.6,-6.6,5.6)); +#44047 = VERTEX_POINT('',#44048); +#44048 = CARTESIAN_POINT('',(0.6,-5.4,5.6)); +#44049 = LINE('',#44050,#44051); +#44050 = CARTESIAN_POINT('',(0.6,-6.6,5.6)); +#44051 = VECTOR('',#44052,1.); +#44052 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44053 = ORIENTED_EDGE('',*,*,#44054,.F.); +#44054 = EDGE_CURVE('',#44055,#44045,#44057,.T.); +#44055 = VERTEX_POINT('',#44056); +#44056 = CARTESIAN_POINT('',(-0.6,-6.6,5.6)); +#44057 = LINE('',#44058,#44059); +#44058 = CARTESIAN_POINT('',(-0.6,-6.6,5.6)); +#44059 = VECTOR('',#44060,1.); +#44060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44061 = ORIENTED_EDGE('',*,*,#44062,.F.); +#44062 = EDGE_CURVE('',#44063,#44055,#44065,.T.); +#44063 = VERTEX_POINT('',#44064); +#44064 = CARTESIAN_POINT('',(-0.6,-5.4,5.6)); +#44065 = LINE('',#44066,#44067); +#44066 = CARTESIAN_POINT('',(-0.6,-5.4,5.6)); +#44067 = VECTOR('',#44068,1.); +#44068 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44069 = ORIENTED_EDGE('',*,*,#44070,.F.); +#44070 = EDGE_CURVE('',#44047,#44063,#44071,.T.); +#44071 = LINE('',#44072,#44073); +#44072 = CARTESIAN_POINT('',(0.6,-5.4,5.6)); +#44073 = VECTOR('',#44074,1.); +#44074 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44075 = FACE_BOUND('',#44076,.T.); +#44076 = EDGE_LOOP('',(#44077,#44087,#44095,#44103)); +#44077 = ORIENTED_EDGE('',*,*,#44078,.F.); +#44078 = EDGE_CURVE('',#44079,#44081,#44083,.T.); +#44079 = VERTEX_POINT('',#44080); +#44080 = CARTESIAN_POINT('',(0.6,-4.6,5.6)); +#44081 = VERTEX_POINT('',#44082); +#44082 = CARTESIAN_POINT('',(0.6,-3.4,5.6)); +#44083 = LINE('',#44084,#44085); +#44084 = CARTESIAN_POINT('',(0.6,-4.6,5.6)); +#44085 = VECTOR('',#44086,1.); +#44086 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44087 = ORIENTED_EDGE('',*,*,#44088,.F.); +#44088 = EDGE_CURVE('',#44089,#44079,#44091,.T.); +#44089 = VERTEX_POINT('',#44090); +#44090 = CARTESIAN_POINT('',(-0.6,-4.6,5.6)); +#44091 = LINE('',#44092,#44093); +#44092 = CARTESIAN_POINT('',(-0.6,-4.6,5.6)); +#44093 = VECTOR('',#44094,1.); +#44094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44095 = ORIENTED_EDGE('',*,*,#44096,.F.); +#44096 = EDGE_CURVE('',#44097,#44089,#44099,.T.); +#44097 = VERTEX_POINT('',#44098); +#44098 = CARTESIAN_POINT('',(-0.6,-3.4,5.6)); +#44099 = LINE('',#44100,#44101); +#44100 = CARTESIAN_POINT('',(-0.6,-3.4,5.6)); +#44101 = VECTOR('',#44102,1.); +#44102 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44103 = ORIENTED_EDGE('',*,*,#44104,.F.); +#44104 = EDGE_CURVE('',#44081,#44097,#44105,.T.); +#44105 = LINE('',#44106,#44107); +#44106 = CARTESIAN_POINT('',(0.6,-3.4,5.6)); +#44107 = VECTOR('',#44108,1.); +#44108 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44109 = FACE_BOUND('',#44110,.T.); +#44110 = EDGE_LOOP('',(#44111,#44121,#44129,#44137)); +#44111 = ORIENTED_EDGE('',*,*,#44112,.F.); +#44112 = EDGE_CURVE('',#44113,#44115,#44117,.T.); +#44113 = VERTEX_POINT('',#44114); +#44114 = CARTESIAN_POINT('',(0.6,-2.6,5.6)); +#44115 = VERTEX_POINT('',#44116); +#44116 = CARTESIAN_POINT('',(0.6,-1.4,5.6)); +#44117 = LINE('',#44118,#44119); +#44118 = CARTESIAN_POINT('',(0.6,-2.6,5.6)); +#44119 = VECTOR('',#44120,1.); +#44120 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44121 = ORIENTED_EDGE('',*,*,#44122,.F.); +#44122 = EDGE_CURVE('',#44123,#44113,#44125,.T.); +#44123 = VERTEX_POINT('',#44124); +#44124 = CARTESIAN_POINT('',(-0.6,-2.6,5.6)); +#44125 = LINE('',#44126,#44127); +#44126 = CARTESIAN_POINT('',(-0.6,-2.6,5.6)); +#44127 = VECTOR('',#44128,1.); +#44128 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44129 = ORIENTED_EDGE('',*,*,#44130,.F.); +#44130 = EDGE_CURVE('',#44131,#44123,#44133,.T.); +#44131 = VERTEX_POINT('',#44132); +#44132 = CARTESIAN_POINT('',(-0.6,-1.4,5.6)); +#44133 = LINE('',#44134,#44135); +#44134 = CARTESIAN_POINT('',(-0.6,-1.4,5.6)); +#44135 = VECTOR('',#44136,1.); +#44136 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44137 = ORIENTED_EDGE('',*,*,#44138,.F.); +#44138 = EDGE_CURVE('',#44115,#44131,#44139,.T.); +#44139 = LINE('',#44140,#44141); +#44140 = CARTESIAN_POINT('',(0.6,-1.4,5.6)); +#44141 = VECTOR('',#44142,1.); +#44142 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44143 = FACE_BOUND('',#44144,.T.); +#44144 = EDGE_LOOP('',(#44145,#44155,#44163,#44171)); +#44145 = ORIENTED_EDGE('',*,*,#44146,.F.); +#44146 = EDGE_CURVE('',#44147,#44149,#44151,.T.); +#44147 = VERTEX_POINT('',#44148); +#44148 = CARTESIAN_POINT('',(0.6,-0.6,5.6)); +#44149 = VERTEX_POINT('',#44150); +#44150 = CARTESIAN_POINT('',(0.6,0.6,5.6)); +#44151 = LINE('',#44152,#44153); +#44152 = CARTESIAN_POINT('',(0.6,-0.6,5.6)); +#44153 = VECTOR('',#44154,1.); +#44154 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44155 = ORIENTED_EDGE('',*,*,#44156,.F.); +#44156 = EDGE_CURVE('',#44157,#44147,#44159,.T.); +#44157 = VERTEX_POINT('',#44158); +#44158 = CARTESIAN_POINT('',(-0.6,-0.6,5.6)); +#44159 = LINE('',#44160,#44161); +#44160 = CARTESIAN_POINT('',(-0.6,-0.6,5.6)); +#44161 = VECTOR('',#44162,1.); +#44162 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44163 = ORIENTED_EDGE('',*,*,#44164,.F.); +#44164 = EDGE_CURVE('',#44165,#44157,#44167,.T.); +#44165 = VERTEX_POINT('',#44166); +#44166 = CARTESIAN_POINT('',(-0.6,0.6,5.6)); +#44167 = LINE('',#44168,#44169); +#44168 = CARTESIAN_POINT('',(-0.6,0.6,5.6)); +#44169 = VECTOR('',#44170,1.); +#44170 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44171 = ORIENTED_EDGE('',*,*,#44172,.F.); +#44172 = EDGE_CURVE('',#44149,#44165,#44173,.T.); +#44173 = LINE('',#44174,#44175); +#44174 = CARTESIAN_POINT('',(0.6,0.6,5.6)); +#44175 = VECTOR('',#44176,1.); +#44176 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44177 = PLANE('',#44178); +#44178 = AXIS2_PLACEMENT_3D('',#44179,#44180,#44181); +#44179 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,5.6)); +#44180 = DIRECTION('',(0.,0.,1.)); +#44181 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#44182 = ADVANCED_FACE('',(#44183),#44199,.F.); +#44183 = FACE_BOUND('',#44184,.F.); +#44184 = EDGE_LOOP('',(#44185,#44186,#44192,#44193)); +#44185 = ORIENTED_EDGE('',*,*,#43686,.T.); +#44186 = ORIENTED_EDGE('',*,*,#44187,.F.); +#44187 = EDGE_CURVE('',#43775,#43689,#44188,.T.); +#44188 = LINE('',#44189,#44190); +#44189 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#44190 = VECTOR('',#44191,1.); +#44191 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44192 = ORIENTED_EDGE('',*,*,#43774,.T.); +#44193 = ORIENTED_EDGE('',*,*,#44194,.T.); +#44194 = EDGE_CURVE('',#43767,#43687,#44195,.T.); +#44195 = LINE('',#44196,#44197); +#44196 = CARTESIAN_POINT('',(-1.,1.,0.)); +#44197 = VECTOR('',#44198,1.); +#44198 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44199 = PLANE('',#44200); +#44200 = AXIS2_PLACEMENT_3D('',#44201,#44202,#44203); +#44201 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.)); +#44202 = DIRECTION('',(0.,0.,1.)); +#44203 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#44204 = ADVANCED_FACE('',(#44205),#44216,.T.); +#44205 = FACE_BOUND('',#44206,.T.); +#44206 = EDGE_LOOP('',(#44207,#44208,#44214,#44215)); +#44207 = ORIENTED_EDGE('',*,*,#43782,.T.); +#44208 = ORIENTED_EDGE('',*,*,#44209,.T.); +#44209 = EDGE_CURVE('',#43783,#43728,#44210,.T.); +#44210 = LINE('',#44211,#44212); +#44211 = CARTESIAN_POINT('',(-0.666666666667,1.,0.2)); +#44212 = VECTOR('',#44213,1.); +#44213 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44214 = ORIENTED_EDGE('',*,*,#43735,.F.); +#44215 = ORIENTED_EDGE('',*,*,#44187,.F.); +#44216 = PLANE('',#44217); +#44217 = AXIS2_PLACEMENT_3D('',#44218,#44219,#44220); +#44218 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#44219 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44220 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44221 = ADVANCED_FACE('',(#44222,#44233,#44299,#44365,#44431,#44497, + #44563,#44629,#44695,#44761,#44827),#44893,.F.); +#44222 = FACE_BOUND('',#44223,.F.); +#44223 = EDGE_LOOP('',(#44224,#44230,#44231,#44232)); +#44224 = ORIENTED_EDGE('',*,*,#44225,.T.); +#44225 = EDGE_CURVE('',#43720,#43791,#44226,.T.); +#44226 = LINE('',#44227,#44228); +#44227 = CARTESIAN_POINT('',(0.666666666667,-19.,0.2)); +#44228 = VECTOR('',#44229,1.); +#44229 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44230 = ORIENTED_EDGE('',*,*,#43790,.T.); +#44231 = ORIENTED_EDGE('',*,*,#44209,.T.); +#44232 = ORIENTED_EDGE('',*,*,#43727,.T.); +#44233 = FACE_BOUND('',#44234,.F.); +#44234 = EDGE_LOOP('',(#44235,#44245,#44253,#44261,#44269,#44277,#44285, + #44293)); +#44235 = ORIENTED_EDGE('',*,*,#44236,.F.); +#44236 = EDGE_CURVE('',#44237,#44239,#44241,.T.); +#44237 = VERTEX_POINT('',#44238); +#44238 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44239 = VERTEX_POINT('',#44240); +#44240 = CARTESIAN_POINT('',(0.1,-18.45,0.2)); +#44241 = LINE('',#44242,#44243); +#44242 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44243 = VECTOR('',#44244,1.); +#44244 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44245 = ORIENTED_EDGE('',*,*,#44246,.T.); +#44246 = EDGE_CURVE('',#44237,#44247,#44249,.T.); +#44247 = VERTEX_POINT('',#44248); +#44248 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#44249 = LINE('',#44250,#44251); +#44250 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44251 = VECTOR('',#44252,1.); +#44252 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44253 = ORIENTED_EDGE('',*,*,#44254,.F.); +#44254 = EDGE_CURVE('',#44255,#44247,#44257,.T.); +#44255 = VERTEX_POINT('',#44256); +#44256 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#44257 = LINE('',#44258,#44259); +#44258 = CARTESIAN_POINT('',(-0.1,-13.5,0.2)); +#44259 = VECTOR('',#44260,1.); +#44260 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44261 = ORIENTED_EDGE('',*,*,#44262,.T.); +#44262 = EDGE_CURVE('',#44255,#44263,#44265,.T.); +#44263 = VERTEX_POINT('',#44264); +#44264 = CARTESIAN_POINT('',(-0.1,-17.55,0.2)); +#44265 = LINE('',#44266,#44267); +#44266 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44267 = VECTOR('',#44268,1.); +#44268 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44269 = ORIENTED_EDGE('',*,*,#44270,.T.); +#44270 = EDGE_CURVE('',#44263,#44271,#44273,.T.); +#44271 = VERTEX_POINT('',#44272); +#44272 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#44273 = LINE('',#44274,#44275); +#44274 = CARTESIAN_POINT('',(-0.1,-17.55,0.2)); +#44275 = VECTOR('',#44276,1.); +#44276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44277 = ORIENTED_EDGE('',*,*,#44278,.T.); +#44278 = EDGE_CURVE('',#44271,#44279,#44281,.T.); +#44279 = VERTEX_POINT('',#44280); +#44280 = CARTESIAN_POINT('',(0.1,-17.7,0.2)); +#44281 = LINE('',#44282,#44283); +#44282 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#44283 = VECTOR('',#44284,1.); +#44284 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44285 = ORIENTED_EDGE('',*,*,#44286,.T.); +#44286 = EDGE_CURVE('',#44279,#44287,#44289,.T.); +#44287 = VERTEX_POINT('',#44288); +#44288 = CARTESIAN_POINT('',(0.1,-18.3,0.2)); +#44289 = LINE('',#44290,#44291); +#44290 = CARTESIAN_POINT('',(0.1,-13.5,0.2)); +#44291 = VECTOR('',#44292,1.); +#44292 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44293 = ORIENTED_EDGE('',*,*,#44294,.T.); +#44294 = EDGE_CURVE('',#44287,#44239,#44295,.T.); +#44295 = LINE('',#44296,#44297); +#44296 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#44297 = VECTOR('',#44298,1.); +#44298 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44299 = FACE_BOUND('',#44300,.F.); +#44300 = EDGE_LOOP('',(#44301,#44311,#44319,#44327,#44335,#44343,#44351, + #44359)); +#44301 = ORIENTED_EDGE('',*,*,#44302,.F.); +#44302 = EDGE_CURVE('',#44303,#44305,#44307,.T.); +#44303 = VERTEX_POINT('',#44304); +#44304 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44305 = VERTEX_POINT('',#44306); +#44306 = CARTESIAN_POINT('',(0.1,-16.45,0.2)); +#44307 = LINE('',#44308,#44309); +#44308 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44309 = VECTOR('',#44310,1.); +#44310 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44311 = ORIENTED_EDGE('',*,*,#44312,.T.); +#44312 = EDGE_CURVE('',#44303,#44313,#44315,.T.); +#44313 = VERTEX_POINT('',#44314); +#44314 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#44315 = LINE('',#44316,#44317); +#44316 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44317 = VECTOR('',#44318,1.); +#44318 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44319 = ORIENTED_EDGE('',*,*,#44320,.F.); +#44320 = EDGE_CURVE('',#44321,#44313,#44323,.T.); +#44321 = VERTEX_POINT('',#44322); +#44322 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#44323 = LINE('',#44324,#44325); +#44324 = CARTESIAN_POINT('',(-0.1,-12.5,0.2)); +#44325 = VECTOR('',#44326,1.); +#44326 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44327 = ORIENTED_EDGE('',*,*,#44328,.T.); +#44328 = EDGE_CURVE('',#44321,#44329,#44331,.T.); +#44329 = VERTEX_POINT('',#44330); +#44330 = CARTESIAN_POINT('',(-0.1,-15.55,0.2)); +#44331 = LINE('',#44332,#44333); +#44332 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44333 = VECTOR('',#44334,1.); +#44334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44335 = ORIENTED_EDGE('',*,*,#44336,.T.); +#44336 = EDGE_CURVE('',#44329,#44337,#44339,.T.); +#44337 = VERTEX_POINT('',#44338); +#44338 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#44339 = LINE('',#44340,#44341); +#44340 = CARTESIAN_POINT('',(-0.1,-15.55,0.2)); +#44341 = VECTOR('',#44342,1.); +#44342 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44343 = ORIENTED_EDGE('',*,*,#44344,.T.); +#44344 = EDGE_CURVE('',#44337,#44345,#44347,.T.); +#44345 = VERTEX_POINT('',#44346); +#44346 = CARTESIAN_POINT('',(0.1,-15.7,0.2)); +#44347 = LINE('',#44348,#44349); +#44348 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#44349 = VECTOR('',#44350,1.); +#44350 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44351 = ORIENTED_EDGE('',*,*,#44352,.T.); +#44352 = EDGE_CURVE('',#44345,#44353,#44355,.T.); +#44353 = VERTEX_POINT('',#44354); +#44354 = CARTESIAN_POINT('',(0.1,-16.3,0.2)); +#44355 = LINE('',#44356,#44357); +#44356 = CARTESIAN_POINT('',(0.1,-12.5,0.2)); +#44357 = VECTOR('',#44358,1.); +#44358 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44359 = ORIENTED_EDGE('',*,*,#44360,.T.); +#44360 = EDGE_CURVE('',#44353,#44305,#44361,.T.); +#44361 = LINE('',#44362,#44363); +#44362 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#44363 = VECTOR('',#44364,1.); +#44364 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44365 = FACE_BOUND('',#44366,.F.); +#44366 = EDGE_LOOP('',(#44367,#44377,#44385,#44393,#44401,#44409,#44417, + #44425)); +#44367 = ORIENTED_EDGE('',*,*,#44368,.F.); +#44368 = EDGE_CURVE('',#44369,#44371,#44373,.T.); +#44369 = VERTEX_POINT('',#44370); +#44370 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44371 = VERTEX_POINT('',#44372); +#44372 = CARTESIAN_POINT('',(0.1,-14.45,0.2)); +#44373 = LINE('',#44374,#44375); +#44374 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44375 = VECTOR('',#44376,1.); +#44376 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44377 = ORIENTED_EDGE('',*,*,#44378,.T.); +#44378 = EDGE_CURVE('',#44369,#44379,#44381,.T.); +#44379 = VERTEX_POINT('',#44380); +#44380 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#44381 = LINE('',#44382,#44383); +#44382 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44383 = VECTOR('',#44384,1.); +#44384 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44385 = ORIENTED_EDGE('',*,*,#44386,.F.); +#44386 = EDGE_CURVE('',#44387,#44379,#44389,.T.); +#44387 = VERTEX_POINT('',#44388); +#44388 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#44389 = LINE('',#44390,#44391); +#44390 = CARTESIAN_POINT('',(-0.1,-11.5,0.2)); +#44391 = VECTOR('',#44392,1.); +#44392 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44393 = ORIENTED_EDGE('',*,*,#44394,.T.); +#44394 = EDGE_CURVE('',#44387,#44395,#44397,.T.); +#44395 = VERTEX_POINT('',#44396); +#44396 = CARTESIAN_POINT('',(-0.1,-13.55,0.2)); +#44397 = LINE('',#44398,#44399); +#44398 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44399 = VECTOR('',#44400,1.); +#44400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44401 = ORIENTED_EDGE('',*,*,#44402,.T.); +#44402 = EDGE_CURVE('',#44395,#44403,#44405,.T.); +#44403 = VERTEX_POINT('',#44404); +#44404 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#44405 = LINE('',#44406,#44407); +#44406 = CARTESIAN_POINT('',(-0.1,-13.55,0.2)); +#44407 = VECTOR('',#44408,1.); +#44408 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44409 = ORIENTED_EDGE('',*,*,#44410,.T.); +#44410 = EDGE_CURVE('',#44403,#44411,#44413,.T.); +#44411 = VERTEX_POINT('',#44412); +#44412 = CARTESIAN_POINT('',(0.1,-13.7,0.2)); +#44413 = LINE('',#44414,#44415); +#44414 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#44415 = VECTOR('',#44416,1.); +#44416 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44417 = ORIENTED_EDGE('',*,*,#44418,.T.); +#44418 = EDGE_CURVE('',#44411,#44419,#44421,.T.); +#44419 = VERTEX_POINT('',#44420); +#44420 = CARTESIAN_POINT('',(0.1,-14.3,0.2)); +#44421 = LINE('',#44422,#44423); +#44422 = CARTESIAN_POINT('',(0.1,-11.5,0.2)); +#44423 = VECTOR('',#44424,1.); +#44424 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44425 = ORIENTED_EDGE('',*,*,#44426,.T.); +#44426 = EDGE_CURVE('',#44419,#44371,#44427,.T.); +#44427 = LINE('',#44428,#44429); +#44428 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#44429 = VECTOR('',#44430,1.); +#44430 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44431 = FACE_BOUND('',#44432,.F.); +#44432 = EDGE_LOOP('',(#44433,#44443,#44451,#44459,#44467,#44475,#44483, + #44491)); +#44433 = ORIENTED_EDGE('',*,*,#44434,.F.); +#44434 = EDGE_CURVE('',#44435,#44437,#44439,.T.); +#44435 = VERTEX_POINT('',#44436); +#44436 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44437 = VERTEX_POINT('',#44438); +#44438 = CARTESIAN_POINT('',(0.1,-12.45,0.2)); +#44439 = LINE('',#44440,#44441); +#44440 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44441 = VECTOR('',#44442,1.); +#44442 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44443 = ORIENTED_EDGE('',*,*,#44444,.T.); +#44444 = EDGE_CURVE('',#44435,#44445,#44447,.T.); +#44445 = VERTEX_POINT('',#44446); +#44446 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#44447 = LINE('',#44448,#44449); +#44448 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44449 = VECTOR('',#44450,1.); +#44450 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44451 = ORIENTED_EDGE('',*,*,#44452,.F.); +#44452 = EDGE_CURVE('',#44453,#44445,#44455,.T.); +#44453 = VERTEX_POINT('',#44454); +#44454 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#44455 = LINE('',#44456,#44457); +#44456 = CARTESIAN_POINT('',(-0.1,-10.5,0.2)); +#44457 = VECTOR('',#44458,1.); +#44458 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44459 = ORIENTED_EDGE('',*,*,#44460,.T.); +#44460 = EDGE_CURVE('',#44453,#44461,#44463,.T.); +#44461 = VERTEX_POINT('',#44462); +#44462 = CARTESIAN_POINT('',(-0.1,-11.55,0.2)); +#44463 = LINE('',#44464,#44465); +#44464 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44465 = VECTOR('',#44466,1.); +#44466 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44467 = ORIENTED_EDGE('',*,*,#44468,.T.); +#44468 = EDGE_CURVE('',#44461,#44469,#44471,.T.); +#44469 = VERTEX_POINT('',#44470); +#44470 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#44471 = LINE('',#44472,#44473); +#44472 = CARTESIAN_POINT('',(-0.1,-11.55,0.2)); +#44473 = VECTOR('',#44474,1.); +#44474 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44475 = ORIENTED_EDGE('',*,*,#44476,.T.); +#44476 = EDGE_CURVE('',#44469,#44477,#44479,.T.); +#44477 = VERTEX_POINT('',#44478); +#44478 = CARTESIAN_POINT('',(0.1,-11.7,0.2)); +#44479 = LINE('',#44480,#44481); +#44480 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#44481 = VECTOR('',#44482,1.); +#44482 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44483 = ORIENTED_EDGE('',*,*,#44484,.T.); +#44484 = EDGE_CURVE('',#44477,#44485,#44487,.T.); +#44485 = VERTEX_POINT('',#44486); +#44486 = CARTESIAN_POINT('',(0.1,-12.3,0.2)); +#44487 = LINE('',#44488,#44489); +#44488 = CARTESIAN_POINT('',(0.1,-10.5,0.2)); +#44489 = VECTOR('',#44490,1.); +#44490 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44491 = ORIENTED_EDGE('',*,*,#44492,.T.); +#44492 = EDGE_CURVE('',#44485,#44437,#44493,.T.); +#44493 = LINE('',#44494,#44495); +#44494 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#44495 = VECTOR('',#44496,1.); +#44496 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44497 = FACE_BOUND('',#44498,.F.); +#44498 = EDGE_LOOP('',(#44499,#44509,#44517,#44525,#44533,#44541,#44549, + #44557)); +#44499 = ORIENTED_EDGE('',*,*,#44500,.F.); +#44500 = EDGE_CURVE('',#44501,#44503,#44505,.T.); +#44501 = VERTEX_POINT('',#44502); +#44502 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44503 = VERTEX_POINT('',#44504); +#44504 = CARTESIAN_POINT('',(0.1,-10.45,0.2)); +#44505 = LINE('',#44506,#44507); +#44506 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44507 = VECTOR('',#44508,1.); +#44508 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44509 = ORIENTED_EDGE('',*,*,#44510,.T.); +#44510 = EDGE_CURVE('',#44501,#44511,#44513,.T.); +#44511 = VERTEX_POINT('',#44512); +#44512 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#44513 = LINE('',#44514,#44515); +#44514 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44515 = VECTOR('',#44516,1.); +#44516 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44517 = ORIENTED_EDGE('',*,*,#44518,.F.); +#44518 = EDGE_CURVE('',#44519,#44511,#44521,.T.); +#44519 = VERTEX_POINT('',#44520); +#44520 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#44521 = LINE('',#44522,#44523); +#44522 = CARTESIAN_POINT('',(-0.1,-9.5,0.2)); +#44523 = VECTOR('',#44524,1.); +#44524 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44525 = ORIENTED_EDGE('',*,*,#44526,.T.); +#44526 = EDGE_CURVE('',#44519,#44527,#44529,.T.); +#44527 = VERTEX_POINT('',#44528); +#44528 = CARTESIAN_POINT('',(-0.1,-9.55,0.2)); +#44529 = LINE('',#44530,#44531); +#44530 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44531 = VECTOR('',#44532,1.); +#44532 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44533 = ORIENTED_EDGE('',*,*,#44534,.T.); +#44534 = EDGE_CURVE('',#44527,#44535,#44537,.T.); +#44535 = VERTEX_POINT('',#44536); +#44536 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#44537 = LINE('',#44538,#44539); +#44538 = CARTESIAN_POINT('',(-0.1,-9.55,0.2)); +#44539 = VECTOR('',#44540,1.); +#44540 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44541 = ORIENTED_EDGE('',*,*,#44542,.T.); +#44542 = EDGE_CURVE('',#44535,#44543,#44545,.T.); +#44543 = VERTEX_POINT('',#44544); +#44544 = CARTESIAN_POINT('',(0.1,-9.7,0.2)); +#44545 = LINE('',#44546,#44547); +#44546 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#44547 = VECTOR('',#44548,1.); +#44548 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44549 = ORIENTED_EDGE('',*,*,#44550,.T.); +#44550 = EDGE_CURVE('',#44543,#44551,#44553,.T.); +#44551 = VERTEX_POINT('',#44552); +#44552 = CARTESIAN_POINT('',(0.1,-10.3,0.2)); +#44553 = LINE('',#44554,#44555); +#44554 = CARTESIAN_POINT('',(0.1,-9.5,0.2)); +#44555 = VECTOR('',#44556,1.); +#44556 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44557 = ORIENTED_EDGE('',*,*,#44558,.T.); +#44558 = EDGE_CURVE('',#44551,#44503,#44559,.T.); +#44559 = LINE('',#44560,#44561); +#44560 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#44561 = VECTOR('',#44562,1.); +#44562 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44563 = FACE_BOUND('',#44564,.F.); +#44564 = EDGE_LOOP('',(#44565,#44575,#44583,#44591,#44599,#44607,#44615, + #44623)); +#44565 = ORIENTED_EDGE('',*,*,#44566,.F.); +#44566 = EDGE_CURVE('',#44567,#44569,#44571,.T.); +#44567 = VERTEX_POINT('',#44568); +#44568 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44569 = VERTEX_POINT('',#44570); +#44570 = CARTESIAN_POINT('',(0.1,-8.45,0.2)); +#44571 = LINE('',#44572,#44573); +#44572 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44573 = VECTOR('',#44574,1.); +#44574 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44575 = ORIENTED_EDGE('',*,*,#44576,.T.); +#44576 = EDGE_CURVE('',#44567,#44577,#44579,.T.); +#44577 = VERTEX_POINT('',#44578); +#44578 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#44579 = LINE('',#44580,#44581); +#44580 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44581 = VECTOR('',#44582,1.); +#44582 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44583 = ORIENTED_EDGE('',*,*,#44584,.F.); +#44584 = EDGE_CURVE('',#44585,#44577,#44587,.T.); +#44585 = VERTEX_POINT('',#44586); +#44586 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#44587 = LINE('',#44588,#44589); +#44588 = CARTESIAN_POINT('',(-0.1,-8.5,0.2)); +#44589 = VECTOR('',#44590,1.); +#44590 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44591 = ORIENTED_EDGE('',*,*,#44592,.T.); +#44592 = EDGE_CURVE('',#44585,#44593,#44595,.T.); +#44593 = VERTEX_POINT('',#44594); +#44594 = CARTESIAN_POINT('',(-0.1,-7.55,0.2)); +#44595 = LINE('',#44596,#44597); +#44596 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44597 = VECTOR('',#44598,1.); +#44598 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44599 = ORIENTED_EDGE('',*,*,#44600,.T.); +#44600 = EDGE_CURVE('',#44593,#44601,#44603,.T.); +#44601 = VERTEX_POINT('',#44602); +#44602 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#44603 = LINE('',#44604,#44605); +#44604 = CARTESIAN_POINT('',(-0.1,-7.55,0.2)); +#44605 = VECTOR('',#44606,1.); +#44606 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44607 = ORIENTED_EDGE('',*,*,#44608,.T.); +#44608 = EDGE_CURVE('',#44601,#44609,#44611,.T.); +#44609 = VERTEX_POINT('',#44610); +#44610 = CARTESIAN_POINT('',(0.1,-7.7,0.2)); +#44611 = LINE('',#44612,#44613); +#44612 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#44613 = VECTOR('',#44614,1.); +#44614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44615 = ORIENTED_EDGE('',*,*,#44616,.T.); +#44616 = EDGE_CURVE('',#44609,#44617,#44619,.T.); +#44617 = VERTEX_POINT('',#44618); +#44618 = CARTESIAN_POINT('',(0.1,-8.3,0.2)); +#44619 = LINE('',#44620,#44621); +#44620 = CARTESIAN_POINT('',(0.1,-8.5,0.2)); +#44621 = VECTOR('',#44622,1.); +#44622 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44623 = ORIENTED_EDGE('',*,*,#44624,.T.); +#44624 = EDGE_CURVE('',#44617,#44569,#44625,.T.); +#44625 = LINE('',#44626,#44627); +#44626 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#44627 = VECTOR('',#44628,1.); +#44628 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44629 = FACE_BOUND('',#44630,.F.); +#44630 = EDGE_LOOP('',(#44631,#44641,#44649,#44657,#44665,#44673,#44681, + #44689)); +#44631 = ORIENTED_EDGE('',*,*,#44632,.F.); +#44632 = EDGE_CURVE('',#44633,#44635,#44637,.T.); +#44633 = VERTEX_POINT('',#44634); +#44634 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44635 = VERTEX_POINT('',#44636); +#44636 = CARTESIAN_POINT('',(0.1,-6.45,0.2)); +#44637 = LINE('',#44638,#44639); +#44638 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44639 = VECTOR('',#44640,1.); +#44640 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44641 = ORIENTED_EDGE('',*,*,#44642,.T.); +#44642 = EDGE_CURVE('',#44633,#44643,#44645,.T.); +#44643 = VERTEX_POINT('',#44644); +#44644 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#44645 = LINE('',#44646,#44647); +#44646 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44647 = VECTOR('',#44648,1.); +#44648 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44649 = ORIENTED_EDGE('',*,*,#44650,.F.); +#44650 = EDGE_CURVE('',#44651,#44643,#44653,.T.); +#44651 = VERTEX_POINT('',#44652); +#44652 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#44653 = LINE('',#44654,#44655); +#44654 = CARTESIAN_POINT('',(-0.1,-7.5,0.2)); +#44655 = VECTOR('',#44656,1.); +#44656 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44657 = ORIENTED_EDGE('',*,*,#44658,.T.); +#44658 = EDGE_CURVE('',#44651,#44659,#44661,.T.); +#44659 = VERTEX_POINT('',#44660); +#44660 = CARTESIAN_POINT('',(-0.1,-5.55,0.2)); +#44661 = LINE('',#44662,#44663); +#44662 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44663 = VECTOR('',#44664,1.); +#44664 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44665 = ORIENTED_EDGE('',*,*,#44666,.T.); +#44666 = EDGE_CURVE('',#44659,#44667,#44669,.T.); +#44667 = VERTEX_POINT('',#44668); +#44668 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#44669 = LINE('',#44670,#44671); +#44670 = CARTESIAN_POINT('',(-0.1,-5.55,0.2)); +#44671 = VECTOR('',#44672,1.); +#44672 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44673 = ORIENTED_EDGE('',*,*,#44674,.T.); +#44674 = EDGE_CURVE('',#44667,#44675,#44677,.T.); +#44675 = VERTEX_POINT('',#44676); +#44676 = CARTESIAN_POINT('',(0.1,-5.7,0.2)); +#44677 = LINE('',#44678,#44679); +#44678 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#44679 = VECTOR('',#44680,1.); +#44680 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44681 = ORIENTED_EDGE('',*,*,#44682,.T.); +#44682 = EDGE_CURVE('',#44675,#44683,#44685,.T.); +#44683 = VERTEX_POINT('',#44684); +#44684 = CARTESIAN_POINT('',(0.1,-6.3,0.2)); +#44685 = LINE('',#44686,#44687); +#44686 = CARTESIAN_POINT('',(0.1,-7.5,0.2)); +#44687 = VECTOR('',#44688,1.); +#44688 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44689 = ORIENTED_EDGE('',*,*,#44690,.T.); +#44690 = EDGE_CURVE('',#44683,#44635,#44691,.T.); +#44691 = LINE('',#44692,#44693); +#44692 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#44693 = VECTOR('',#44694,1.); +#44694 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44695 = FACE_BOUND('',#44696,.F.); +#44696 = EDGE_LOOP('',(#44697,#44707,#44715,#44723,#44731,#44739,#44747, + #44755)); +#44697 = ORIENTED_EDGE('',*,*,#44698,.F.); +#44698 = EDGE_CURVE('',#44699,#44701,#44703,.T.); +#44699 = VERTEX_POINT('',#44700); +#44700 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44701 = VERTEX_POINT('',#44702); +#44702 = CARTESIAN_POINT('',(0.1,-4.45,0.2)); +#44703 = LINE('',#44704,#44705); +#44704 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44705 = VECTOR('',#44706,1.); +#44706 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44707 = ORIENTED_EDGE('',*,*,#44708,.T.); +#44708 = EDGE_CURVE('',#44699,#44709,#44711,.T.); +#44709 = VERTEX_POINT('',#44710); +#44710 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#44711 = LINE('',#44712,#44713); +#44712 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44713 = VECTOR('',#44714,1.); +#44714 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44715 = ORIENTED_EDGE('',*,*,#44716,.F.); +#44716 = EDGE_CURVE('',#44717,#44709,#44719,.T.); +#44717 = VERTEX_POINT('',#44718); +#44718 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#44719 = LINE('',#44720,#44721); +#44720 = CARTESIAN_POINT('',(-0.1,-6.5,0.2)); +#44721 = VECTOR('',#44722,1.); +#44722 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44723 = ORIENTED_EDGE('',*,*,#44724,.T.); +#44724 = EDGE_CURVE('',#44717,#44725,#44727,.T.); +#44725 = VERTEX_POINT('',#44726); +#44726 = CARTESIAN_POINT('',(-0.1,-3.55,0.2)); +#44727 = LINE('',#44728,#44729); +#44728 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44729 = VECTOR('',#44730,1.); +#44730 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44731 = ORIENTED_EDGE('',*,*,#44732,.T.); +#44732 = EDGE_CURVE('',#44725,#44733,#44735,.T.); +#44733 = VERTEX_POINT('',#44734); +#44734 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#44735 = LINE('',#44736,#44737); +#44736 = CARTESIAN_POINT('',(-0.1,-3.55,0.2)); +#44737 = VECTOR('',#44738,1.); +#44738 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44739 = ORIENTED_EDGE('',*,*,#44740,.T.); +#44740 = EDGE_CURVE('',#44733,#44741,#44743,.T.); +#44741 = VERTEX_POINT('',#44742); +#44742 = CARTESIAN_POINT('',(0.1,-3.7,0.2)); +#44743 = LINE('',#44744,#44745); +#44744 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#44745 = VECTOR('',#44746,1.); +#44746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44747 = ORIENTED_EDGE('',*,*,#44748,.T.); +#44748 = EDGE_CURVE('',#44741,#44749,#44751,.T.); +#44749 = VERTEX_POINT('',#44750); +#44750 = CARTESIAN_POINT('',(0.1,-4.3,0.2)); +#44751 = LINE('',#44752,#44753); +#44752 = CARTESIAN_POINT('',(0.1,-6.5,0.2)); +#44753 = VECTOR('',#44754,1.); +#44754 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44755 = ORIENTED_EDGE('',*,*,#44756,.T.); +#44756 = EDGE_CURVE('',#44749,#44701,#44757,.T.); +#44757 = LINE('',#44758,#44759); +#44758 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#44759 = VECTOR('',#44760,1.); +#44760 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44761 = FACE_BOUND('',#44762,.F.); +#44762 = EDGE_LOOP('',(#44763,#44773,#44781,#44789,#44797,#44805,#44813, + #44821)); +#44763 = ORIENTED_EDGE('',*,*,#44764,.F.); +#44764 = EDGE_CURVE('',#44765,#44767,#44769,.T.); +#44765 = VERTEX_POINT('',#44766); +#44766 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44767 = VERTEX_POINT('',#44768); +#44768 = CARTESIAN_POINT('',(0.1,-2.45,0.2)); +#44769 = LINE('',#44770,#44771); +#44770 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44771 = VECTOR('',#44772,1.); +#44772 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44773 = ORIENTED_EDGE('',*,*,#44774,.T.); +#44774 = EDGE_CURVE('',#44765,#44775,#44777,.T.); +#44775 = VERTEX_POINT('',#44776); +#44776 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#44777 = LINE('',#44778,#44779); +#44778 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44779 = VECTOR('',#44780,1.); +#44780 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44781 = ORIENTED_EDGE('',*,*,#44782,.F.); +#44782 = EDGE_CURVE('',#44783,#44775,#44785,.T.); +#44783 = VERTEX_POINT('',#44784); +#44784 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#44785 = LINE('',#44786,#44787); +#44786 = CARTESIAN_POINT('',(-0.1,-5.5,0.2)); +#44787 = VECTOR('',#44788,1.); +#44788 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44789 = ORIENTED_EDGE('',*,*,#44790,.T.); +#44790 = EDGE_CURVE('',#44783,#44791,#44793,.T.); +#44791 = VERTEX_POINT('',#44792); +#44792 = CARTESIAN_POINT('',(-0.1,-1.55,0.2)); +#44793 = LINE('',#44794,#44795); +#44794 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44795 = VECTOR('',#44796,1.); +#44796 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44797 = ORIENTED_EDGE('',*,*,#44798,.T.); +#44798 = EDGE_CURVE('',#44791,#44799,#44801,.T.); +#44799 = VERTEX_POINT('',#44800); +#44800 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#44801 = LINE('',#44802,#44803); +#44802 = CARTESIAN_POINT('',(-0.1,-1.55,0.2)); +#44803 = VECTOR('',#44804,1.); +#44804 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44805 = ORIENTED_EDGE('',*,*,#44806,.T.); +#44806 = EDGE_CURVE('',#44799,#44807,#44809,.T.); +#44807 = VERTEX_POINT('',#44808); +#44808 = CARTESIAN_POINT('',(0.1,-1.7,0.2)); +#44809 = LINE('',#44810,#44811); +#44810 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#44811 = VECTOR('',#44812,1.); +#44812 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44813 = ORIENTED_EDGE('',*,*,#44814,.T.); +#44814 = EDGE_CURVE('',#44807,#44815,#44817,.T.); +#44815 = VERTEX_POINT('',#44816); +#44816 = CARTESIAN_POINT('',(0.1,-2.3,0.2)); +#44817 = LINE('',#44818,#44819); +#44818 = CARTESIAN_POINT('',(0.1,-5.5,0.2)); +#44819 = VECTOR('',#44820,1.); +#44820 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44821 = ORIENTED_EDGE('',*,*,#44822,.T.); +#44822 = EDGE_CURVE('',#44815,#44767,#44823,.T.); +#44823 = LINE('',#44824,#44825); +#44824 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#44825 = VECTOR('',#44826,1.); +#44826 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44827 = FACE_BOUND('',#44828,.F.); +#44828 = EDGE_LOOP('',(#44829,#44839,#44847,#44855,#44863,#44871,#44879, + #44887)); +#44829 = ORIENTED_EDGE('',*,*,#44830,.F.); +#44830 = EDGE_CURVE('',#44831,#44833,#44835,.T.); +#44831 = VERTEX_POINT('',#44832); +#44832 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44833 = VERTEX_POINT('',#44834); +#44834 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#44835 = LINE('',#44836,#44837); +#44836 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44837 = VECTOR('',#44838,1.); +#44838 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44839 = ORIENTED_EDGE('',*,*,#44840,.T.); +#44840 = EDGE_CURVE('',#44831,#44841,#44843,.T.); +#44841 = VERTEX_POINT('',#44842); +#44842 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#44843 = LINE('',#44844,#44845); +#44844 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44845 = VECTOR('',#44846,1.); +#44846 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44847 = ORIENTED_EDGE('',*,*,#44848,.F.); +#44848 = EDGE_CURVE('',#44849,#44841,#44851,.T.); +#44849 = VERTEX_POINT('',#44850); +#44850 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#44851 = LINE('',#44852,#44853); +#44852 = CARTESIAN_POINT('',(-0.1,-4.5,0.2)); +#44853 = VECTOR('',#44854,1.); +#44854 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44855 = ORIENTED_EDGE('',*,*,#44856,.T.); +#44856 = EDGE_CURVE('',#44849,#44857,#44859,.T.); +#44857 = VERTEX_POINT('',#44858); +#44858 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#44859 = LINE('',#44860,#44861); +#44860 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44861 = VECTOR('',#44862,1.); +#44862 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44863 = ORIENTED_EDGE('',*,*,#44864,.T.); +#44864 = EDGE_CURVE('',#44857,#44865,#44867,.T.); +#44865 = VERTEX_POINT('',#44866); +#44866 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#44867 = LINE('',#44868,#44869); +#44868 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#44869 = VECTOR('',#44870,1.); +#44870 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44871 = ORIENTED_EDGE('',*,*,#44872,.T.); +#44872 = EDGE_CURVE('',#44865,#44873,#44875,.T.); +#44873 = VERTEX_POINT('',#44874); +#44874 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#44875 = LINE('',#44876,#44877); +#44876 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#44877 = VECTOR('',#44878,1.); +#44878 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44879 = ORIENTED_EDGE('',*,*,#44880,.T.); +#44880 = EDGE_CURVE('',#44873,#44881,#44883,.T.); +#44881 = VERTEX_POINT('',#44882); +#44882 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#44883 = LINE('',#44884,#44885); +#44884 = CARTESIAN_POINT('',(0.1,-4.5,0.2)); +#44885 = VECTOR('',#44886,1.); +#44886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44887 = ORIENTED_EDGE('',*,*,#44888,.T.); +#44888 = EDGE_CURVE('',#44881,#44833,#44889,.T.); +#44889 = LINE('',#44890,#44891); +#44890 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#44891 = VECTOR('',#44892,1.); +#44892 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44893 = PLANE('',#44894); +#44894 = AXIS2_PLACEMENT_3D('',#44895,#44896,#44897); +#44895 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.2)); +#44896 = DIRECTION('',(0.,0.,1.)); +#44897 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#44898 = ADVANCED_FACE('',(#44899),#44905,.T.); +#44899 = FACE_BOUND('',#44900,.T.); +#44900 = EDGE_LOOP('',(#44901,#44902,#44903,#44904)); +#44901 = ORIENTED_EDGE('',*,*,#43719,.T.); +#44902 = ORIENTED_EDGE('',*,*,#44225,.T.); +#44903 = ORIENTED_EDGE('',*,*,#43798,.F.); +#44904 = ORIENTED_EDGE('',*,*,#43815,.F.); +#44905 = PLANE('',#44906); +#44906 = AXIS2_PLACEMENT_3D('',#44907,#44908,#44909); +#44907 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#44908 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44909 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44910 = ADVANCED_FACE('',(#44911),#44917,.F.); +#44911 = FACE_BOUND('',#44912,.F.); +#44912 = EDGE_LOOP('',(#44913,#44914,#44915,#44916)); +#44913 = ORIENTED_EDGE('',*,*,#43766,.T.); +#44914 = ORIENTED_EDGE('',*,*,#43831,.T.); +#44915 = ORIENTED_EDGE('',*,*,#43696,.F.); +#44916 = ORIENTED_EDGE('',*,*,#44194,.F.); +#44917 = PLANE('',#44918); +#44918 = AXIS2_PLACEMENT_3D('',#44919,#44920,#44921); +#44919 = CARTESIAN_POINT('',(-1.,1.,0.)); +#44920 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44921 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44922 = ADVANCED_FACE('',(#44923),#44948,.T.); +#44923 = FACE_BOUND('',#44924,.T.); +#44924 = EDGE_LOOP('',(#44925,#44933,#44934,#44942)); +#44925 = ORIENTED_EDGE('',*,*,#44926,.F.); +#44926 = EDGE_CURVE('',#43841,#44927,#44929,.T.); +#44927 = VERTEX_POINT('',#44928); +#44928 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#44929 = LINE('',#44930,#44931); +#44930 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#44931 = VECTOR('',#44932,1.); +#44932 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#44933 = ORIENTED_EDGE('',*,*,#43840,.T.); +#44934 = ORIENTED_EDGE('',*,*,#44935,.T.); +#44935 = EDGE_CURVE('',#43843,#44936,#44938,.T.); +#44936 = VERTEX_POINT('',#44937); +#44937 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#44938 = LINE('',#44939,#44940); +#44939 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#44940 = VECTOR('',#44941,1.); +#44941 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#44942 = ORIENTED_EDGE('',*,*,#44943,.F.); +#44943 = EDGE_CURVE('',#44927,#44936,#44944,.T.); +#44944 = LINE('',#44945,#44946); +#44945 = CARTESIAN_POINT('',(0.3,-18.6,5.3)); +#44946 = VECTOR('',#44947,1.); +#44947 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44948 = PLANE('',#44949); +#44949 = AXIS2_PLACEMENT_3D('',#44950,#44951,#44952); +#44950 = CARTESIAN_POINT('',(0.45,-18.6,5.45)); +#44951 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#44952 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#44953 = ADVANCED_FACE('',(#44954),#44972,.T.); +#44954 = FACE_BOUND('',#44955,.T.); +#44955 = EDGE_LOOP('',(#44956,#44957,#44958,#44966)); +#44956 = ORIENTED_EDGE('',*,*,#44935,.F.); +#44957 = ORIENTED_EDGE('',*,*,#43866,.T.); +#44958 = ORIENTED_EDGE('',*,*,#44959,.T.); +#44959 = EDGE_CURVE('',#43859,#44960,#44962,.T.); +#44960 = VERTEX_POINT('',#44961); +#44961 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#44962 = LINE('',#44963,#44964); +#44963 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#44964 = VECTOR('',#44965,1.); +#44965 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#44966 = ORIENTED_EDGE('',*,*,#44967,.F.); +#44967 = EDGE_CURVE('',#44936,#44960,#44968,.T.); +#44968 = LINE('',#44969,#44970); +#44969 = CARTESIAN_POINT('',(0.6,-17.7,5.3)); +#44970 = VECTOR('',#44971,1.); +#44971 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44972 = PLANE('',#44973); +#44973 = AXIS2_PLACEMENT_3D('',#44974,#44975,#44976); +#44974 = CARTESIAN_POINT('',(0.6,-17.55,5.45)); +#44975 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#44976 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#44977 = ADVANCED_FACE('',(#44978),#44996,.T.); +#44978 = FACE_BOUND('',#44979,.T.); +#44979 = EDGE_LOOP('',(#44980,#44981,#44982,#44990)); +#44980 = ORIENTED_EDGE('',*,*,#44959,.F.); +#44981 = ORIENTED_EDGE('',*,*,#43858,.T.); +#44982 = ORIENTED_EDGE('',*,*,#44983,.T.); +#44983 = EDGE_CURVE('',#43851,#44984,#44986,.T.); +#44984 = VERTEX_POINT('',#44985); +#44985 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#44986 = LINE('',#44987,#44988); +#44987 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#44988 = VECTOR('',#44989,1.); +#44989 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#44990 = ORIENTED_EDGE('',*,*,#44991,.F.); +#44991 = EDGE_CURVE('',#44960,#44984,#44992,.T.); +#44992 = LINE('',#44993,#44994); +#44993 = CARTESIAN_POINT('',(-0.3,-17.4,5.3)); +#44994 = VECTOR('',#44995,1.); +#44995 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44996 = PLANE('',#44997); +#44997 = AXIS2_PLACEMENT_3D('',#44998,#44999,#45000); +#44998 = CARTESIAN_POINT('',(-0.45,-17.4,5.45)); +#44999 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45000 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45001 = ADVANCED_FACE('',(#45002),#45013,.T.); +#45002 = FACE_BOUND('',#45003,.T.); +#45003 = EDGE_LOOP('',(#45004,#45005,#45006,#45007)); +#45004 = ORIENTED_EDGE('',*,*,#44983,.F.); +#45005 = ORIENTED_EDGE('',*,*,#43850,.T.); +#45006 = ORIENTED_EDGE('',*,*,#44926,.T.); +#45007 = ORIENTED_EDGE('',*,*,#45008,.F.); +#45008 = EDGE_CURVE('',#44984,#44927,#45009,.T.); +#45009 = LINE('',#45010,#45011); +#45010 = CARTESIAN_POINT('',(-0.6,-18.3,5.3)); +#45011 = VECTOR('',#45012,1.); +#45012 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45013 = PLANE('',#45014); +#45014 = AXIS2_PLACEMENT_3D('',#45015,#45016,#45017); +#45015 = CARTESIAN_POINT('',(-0.6,-18.45,5.45)); +#45016 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45017 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45018 = ADVANCED_FACE('',(#45019),#45044,.T.); +#45019 = FACE_BOUND('',#45020,.T.); +#45020 = EDGE_LOOP('',(#45021,#45029,#45030,#45038)); +#45021 = ORIENTED_EDGE('',*,*,#45022,.F.); +#45022 = EDGE_CURVE('',#43875,#45023,#45025,.T.); +#45023 = VERTEX_POINT('',#45024); +#45024 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#45025 = LINE('',#45026,#45027); +#45026 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#45027 = VECTOR('',#45028,1.); +#45028 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45029 = ORIENTED_EDGE('',*,*,#43874,.T.); +#45030 = ORIENTED_EDGE('',*,*,#45031,.T.); +#45031 = EDGE_CURVE('',#43877,#45032,#45034,.T.); +#45032 = VERTEX_POINT('',#45033); +#45033 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#45034 = LINE('',#45035,#45036); +#45035 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#45036 = VECTOR('',#45037,1.); +#45037 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45038 = ORIENTED_EDGE('',*,*,#45039,.F.); +#45039 = EDGE_CURVE('',#45023,#45032,#45040,.T.); +#45040 = LINE('',#45041,#45042); +#45041 = CARTESIAN_POINT('',(0.3,-16.6,5.3)); +#45042 = VECTOR('',#45043,1.); +#45043 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45044 = PLANE('',#45045); +#45045 = AXIS2_PLACEMENT_3D('',#45046,#45047,#45048); +#45046 = CARTESIAN_POINT('',(0.45,-16.6,5.45)); +#45047 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45048 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45049 = ADVANCED_FACE('',(#45050),#45068,.T.); +#45050 = FACE_BOUND('',#45051,.T.); +#45051 = EDGE_LOOP('',(#45052,#45053,#45054,#45062)); +#45052 = ORIENTED_EDGE('',*,*,#45031,.F.); +#45053 = ORIENTED_EDGE('',*,*,#43900,.T.); +#45054 = ORIENTED_EDGE('',*,*,#45055,.T.); +#45055 = EDGE_CURVE('',#43893,#45056,#45058,.T.); +#45056 = VERTEX_POINT('',#45057); +#45057 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#45058 = LINE('',#45059,#45060); +#45059 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#45060 = VECTOR('',#45061,1.); +#45061 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45062 = ORIENTED_EDGE('',*,*,#45063,.F.); +#45063 = EDGE_CURVE('',#45032,#45056,#45064,.T.); +#45064 = LINE('',#45065,#45066); +#45065 = CARTESIAN_POINT('',(0.6,-15.7,5.3)); +#45066 = VECTOR('',#45067,1.); +#45067 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45068 = PLANE('',#45069); +#45069 = AXIS2_PLACEMENT_3D('',#45070,#45071,#45072); +#45070 = CARTESIAN_POINT('',(0.6,-15.55,5.45)); +#45071 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45072 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45073 = ADVANCED_FACE('',(#45074),#45092,.T.); +#45074 = FACE_BOUND('',#45075,.T.); +#45075 = EDGE_LOOP('',(#45076,#45077,#45078,#45086)); +#45076 = ORIENTED_EDGE('',*,*,#45055,.F.); +#45077 = ORIENTED_EDGE('',*,*,#43892,.T.); +#45078 = ORIENTED_EDGE('',*,*,#45079,.T.); +#45079 = EDGE_CURVE('',#43885,#45080,#45082,.T.); +#45080 = VERTEX_POINT('',#45081); +#45081 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#45082 = LINE('',#45083,#45084); +#45083 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#45084 = VECTOR('',#45085,1.); +#45085 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45086 = ORIENTED_EDGE('',*,*,#45087,.F.); +#45087 = EDGE_CURVE('',#45056,#45080,#45088,.T.); +#45088 = LINE('',#45089,#45090); +#45089 = CARTESIAN_POINT('',(-0.3,-15.4,5.3)); +#45090 = VECTOR('',#45091,1.); +#45091 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45092 = PLANE('',#45093); +#45093 = AXIS2_PLACEMENT_3D('',#45094,#45095,#45096); +#45094 = CARTESIAN_POINT('',(-0.45,-15.4,5.45)); +#45095 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45096 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45097 = ADVANCED_FACE('',(#45098),#45109,.T.); +#45098 = FACE_BOUND('',#45099,.T.); +#45099 = EDGE_LOOP('',(#45100,#45101,#45102,#45103)); +#45100 = ORIENTED_EDGE('',*,*,#45079,.F.); +#45101 = ORIENTED_EDGE('',*,*,#43884,.T.); +#45102 = ORIENTED_EDGE('',*,*,#45022,.T.); +#45103 = ORIENTED_EDGE('',*,*,#45104,.F.); +#45104 = EDGE_CURVE('',#45080,#45023,#45105,.T.); +#45105 = LINE('',#45106,#45107); +#45106 = CARTESIAN_POINT('',(-0.6,-16.3,5.3)); +#45107 = VECTOR('',#45108,1.); +#45108 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45109 = PLANE('',#45110); +#45110 = AXIS2_PLACEMENT_3D('',#45111,#45112,#45113); +#45111 = CARTESIAN_POINT('',(-0.6,-16.45,5.45)); +#45112 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45113 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45114 = ADVANCED_FACE('',(#45115),#45140,.T.); +#45115 = FACE_BOUND('',#45116,.T.); +#45116 = EDGE_LOOP('',(#45117,#45125,#45126,#45134)); +#45117 = ORIENTED_EDGE('',*,*,#45118,.F.); +#45118 = EDGE_CURVE('',#43909,#45119,#45121,.T.); +#45119 = VERTEX_POINT('',#45120); +#45120 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#45121 = LINE('',#45122,#45123); +#45122 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#45123 = VECTOR('',#45124,1.); +#45124 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45125 = ORIENTED_EDGE('',*,*,#43908,.T.); +#45126 = ORIENTED_EDGE('',*,*,#45127,.T.); +#45127 = EDGE_CURVE('',#43911,#45128,#45130,.T.); +#45128 = VERTEX_POINT('',#45129); +#45129 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#45130 = LINE('',#45131,#45132); +#45131 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#45132 = VECTOR('',#45133,1.); +#45133 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45134 = ORIENTED_EDGE('',*,*,#45135,.F.); +#45135 = EDGE_CURVE('',#45119,#45128,#45136,.T.); +#45136 = LINE('',#45137,#45138); +#45137 = CARTESIAN_POINT('',(0.3,-14.6,5.3)); +#45138 = VECTOR('',#45139,1.); +#45139 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45140 = PLANE('',#45141); +#45141 = AXIS2_PLACEMENT_3D('',#45142,#45143,#45144); +#45142 = CARTESIAN_POINT('',(0.45,-14.6,5.45)); +#45143 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45144 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45145 = ADVANCED_FACE('',(#45146),#45164,.T.); +#45146 = FACE_BOUND('',#45147,.T.); +#45147 = EDGE_LOOP('',(#45148,#45149,#45150,#45158)); +#45148 = ORIENTED_EDGE('',*,*,#45127,.F.); +#45149 = ORIENTED_EDGE('',*,*,#43934,.T.); +#45150 = ORIENTED_EDGE('',*,*,#45151,.T.); +#45151 = EDGE_CURVE('',#43927,#45152,#45154,.T.); +#45152 = VERTEX_POINT('',#45153); +#45153 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#45154 = LINE('',#45155,#45156); +#45155 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#45156 = VECTOR('',#45157,1.); +#45157 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45158 = ORIENTED_EDGE('',*,*,#45159,.F.); +#45159 = EDGE_CURVE('',#45128,#45152,#45160,.T.); +#45160 = LINE('',#45161,#45162); +#45161 = CARTESIAN_POINT('',(0.6,-13.7,5.3)); +#45162 = VECTOR('',#45163,1.); +#45163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45164 = PLANE('',#45165); +#45165 = AXIS2_PLACEMENT_3D('',#45166,#45167,#45168); +#45166 = CARTESIAN_POINT('',(0.6,-13.55,5.45)); +#45167 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45168 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45169 = ADVANCED_FACE('',(#45170),#45188,.T.); +#45170 = FACE_BOUND('',#45171,.T.); +#45171 = EDGE_LOOP('',(#45172,#45173,#45174,#45182)); +#45172 = ORIENTED_EDGE('',*,*,#45151,.F.); +#45173 = ORIENTED_EDGE('',*,*,#43926,.T.); +#45174 = ORIENTED_EDGE('',*,*,#45175,.T.); +#45175 = EDGE_CURVE('',#43919,#45176,#45178,.T.); +#45176 = VERTEX_POINT('',#45177); +#45177 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#45178 = LINE('',#45179,#45180); +#45179 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#45180 = VECTOR('',#45181,1.); +#45181 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45182 = ORIENTED_EDGE('',*,*,#45183,.F.); +#45183 = EDGE_CURVE('',#45152,#45176,#45184,.T.); +#45184 = LINE('',#45185,#45186); +#45185 = CARTESIAN_POINT('',(-0.3,-13.4,5.3)); +#45186 = VECTOR('',#45187,1.); +#45187 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45188 = PLANE('',#45189); +#45189 = AXIS2_PLACEMENT_3D('',#45190,#45191,#45192); +#45190 = CARTESIAN_POINT('',(-0.45,-13.4,5.45)); +#45191 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45192 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45193 = ADVANCED_FACE('',(#45194),#45205,.T.); +#45194 = FACE_BOUND('',#45195,.T.); +#45195 = EDGE_LOOP('',(#45196,#45197,#45198,#45199)); +#45196 = ORIENTED_EDGE('',*,*,#45175,.F.); +#45197 = ORIENTED_EDGE('',*,*,#43918,.T.); +#45198 = ORIENTED_EDGE('',*,*,#45118,.T.); +#45199 = ORIENTED_EDGE('',*,*,#45200,.F.); +#45200 = EDGE_CURVE('',#45176,#45119,#45201,.T.); +#45201 = LINE('',#45202,#45203); +#45202 = CARTESIAN_POINT('',(-0.6,-14.3,5.3)); +#45203 = VECTOR('',#45204,1.); +#45204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45205 = PLANE('',#45206); +#45206 = AXIS2_PLACEMENT_3D('',#45207,#45208,#45209); +#45207 = CARTESIAN_POINT('',(-0.6,-14.45,5.45)); +#45208 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45209 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45210 = ADVANCED_FACE('',(#45211),#45236,.T.); +#45211 = FACE_BOUND('',#45212,.T.); +#45212 = EDGE_LOOP('',(#45213,#45221,#45222,#45230)); +#45213 = ORIENTED_EDGE('',*,*,#45214,.F.); +#45214 = EDGE_CURVE('',#43943,#45215,#45217,.T.); +#45215 = VERTEX_POINT('',#45216); +#45216 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#45217 = LINE('',#45218,#45219); +#45218 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#45219 = VECTOR('',#45220,1.); +#45220 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45221 = ORIENTED_EDGE('',*,*,#43942,.T.); +#45222 = ORIENTED_EDGE('',*,*,#45223,.T.); +#45223 = EDGE_CURVE('',#43945,#45224,#45226,.T.); +#45224 = VERTEX_POINT('',#45225); +#45225 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#45226 = LINE('',#45227,#45228); +#45227 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#45228 = VECTOR('',#45229,1.); +#45229 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45230 = ORIENTED_EDGE('',*,*,#45231,.F.); +#45231 = EDGE_CURVE('',#45215,#45224,#45232,.T.); +#45232 = LINE('',#45233,#45234); +#45233 = CARTESIAN_POINT('',(0.3,-12.6,5.3)); +#45234 = VECTOR('',#45235,1.); +#45235 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45236 = PLANE('',#45237); +#45237 = AXIS2_PLACEMENT_3D('',#45238,#45239,#45240); +#45238 = CARTESIAN_POINT('',(0.45,-12.6,5.45)); +#45239 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45240 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45241 = ADVANCED_FACE('',(#45242),#45260,.T.); +#45242 = FACE_BOUND('',#45243,.T.); +#45243 = EDGE_LOOP('',(#45244,#45245,#45246,#45254)); +#45244 = ORIENTED_EDGE('',*,*,#45223,.F.); +#45245 = ORIENTED_EDGE('',*,*,#43968,.T.); +#45246 = ORIENTED_EDGE('',*,*,#45247,.T.); +#45247 = EDGE_CURVE('',#43961,#45248,#45250,.T.); +#45248 = VERTEX_POINT('',#45249); +#45249 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#45250 = LINE('',#45251,#45252); +#45251 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#45252 = VECTOR('',#45253,1.); +#45253 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45254 = ORIENTED_EDGE('',*,*,#45255,.F.); +#45255 = EDGE_CURVE('',#45224,#45248,#45256,.T.); +#45256 = LINE('',#45257,#45258); +#45257 = CARTESIAN_POINT('',(0.6,-11.7,5.3)); +#45258 = VECTOR('',#45259,1.); +#45259 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45260 = PLANE('',#45261); +#45261 = AXIS2_PLACEMENT_3D('',#45262,#45263,#45264); +#45262 = CARTESIAN_POINT('',(0.6,-11.55,5.45)); +#45263 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45264 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45265 = ADVANCED_FACE('',(#45266),#45284,.T.); +#45266 = FACE_BOUND('',#45267,.T.); +#45267 = EDGE_LOOP('',(#45268,#45269,#45270,#45278)); +#45268 = ORIENTED_EDGE('',*,*,#45247,.F.); +#45269 = ORIENTED_EDGE('',*,*,#43960,.T.); +#45270 = ORIENTED_EDGE('',*,*,#45271,.T.); +#45271 = EDGE_CURVE('',#43953,#45272,#45274,.T.); +#45272 = VERTEX_POINT('',#45273); +#45273 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#45274 = LINE('',#45275,#45276); +#45275 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#45276 = VECTOR('',#45277,1.); +#45277 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45278 = ORIENTED_EDGE('',*,*,#45279,.F.); +#45279 = EDGE_CURVE('',#45248,#45272,#45280,.T.); +#45280 = LINE('',#45281,#45282); +#45281 = CARTESIAN_POINT('',(-0.3,-11.4,5.3)); +#45282 = VECTOR('',#45283,1.); +#45283 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45284 = PLANE('',#45285); +#45285 = AXIS2_PLACEMENT_3D('',#45286,#45287,#45288); +#45286 = CARTESIAN_POINT('',(-0.45,-11.4,5.45)); +#45287 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45288 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45289 = ADVANCED_FACE('',(#45290),#45301,.T.); +#45290 = FACE_BOUND('',#45291,.T.); +#45291 = EDGE_LOOP('',(#45292,#45293,#45294,#45295)); +#45292 = ORIENTED_EDGE('',*,*,#45271,.F.); +#45293 = ORIENTED_EDGE('',*,*,#43952,.T.); +#45294 = ORIENTED_EDGE('',*,*,#45214,.T.); +#45295 = ORIENTED_EDGE('',*,*,#45296,.F.); +#45296 = EDGE_CURVE('',#45272,#45215,#45297,.T.); +#45297 = LINE('',#45298,#45299); +#45298 = CARTESIAN_POINT('',(-0.6,-12.3,5.3)); +#45299 = VECTOR('',#45300,1.); +#45300 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45301 = PLANE('',#45302); +#45302 = AXIS2_PLACEMENT_3D('',#45303,#45304,#45305); +#45303 = CARTESIAN_POINT('',(-0.6,-12.45,5.45)); +#45304 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45305 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45306 = ADVANCED_FACE('',(#45307),#45332,.T.); +#45307 = FACE_BOUND('',#45308,.T.); +#45308 = EDGE_LOOP('',(#45309,#45317,#45318,#45326)); +#45309 = ORIENTED_EDGE('',*,*,#45310,.F.); +#45310 = EDGE_CURVE('',#43977,#45311,#45313,.T.); +#45311 = VERTEX_POINT('',#45312); +#45312 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#45313 = LINE('',#45314,#45315); +#45314 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#45315 = VECTOR('',#45316,1.); +#45316 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45317 = ORIENTED_EDGE('',*,*,#43976,.T.); +#45318 = ORIENTED_EDGE('',*,*,#45319,.T.); +#45319 = EDGE_CURVE('',#43979,#45320,#45322,.T.); +#45320 = VERTEX_POINT('',#45321); +#45321 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#45322 = LINE('',#45323,#45324); +#45323 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#45324 = VECTOR('',#45325,1.); +#45325 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45326 = ORIENTED_EDGE('',*,*,#45327,.F.); +#45327 = EDGE_CURVE('',#45311,#45320,#45328,.T.); +#45328 = LINE('',#45329,#45330); +#45329 = CARTESIAN_POINT('',(0.3,-10.6,5.3)); +#45330 = VECTOR('',#45331,1.); +#45331 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45332 = PLANE('',#45333); +#45333 = AXIS2_PLACEMENT_3D('',#45334,#45335,#45336); +#45334 = CARTESIAN_POINT('',(0.45,-10.6,5.45)); +#45335 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45336 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45337 = ADVANCED_FACE('',(#45338),#45356,.T.); +#45338 = FACE_BOUND('',#45339,.T.); +#45339 = EDGE_LOOP('',(#45340,#45341,#45342,#45350)); +#45340 = ORIENTED_EDGE('',*,*,#45319,.F.); +#45341 = ORIENTED_EDGE('',*,*,#44002,.T.); +#45342 = ORIENTED_EDGE('',*,*,#45343,.T.); +#45343 = EDGE_CURVE('',#43995,#45344,#45346,.T.); +#45344 = VERTEX_POINT('',#45345); +#45345 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#45346 = LINE('',#45347,#45348); +#45347 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#45348 = VECTOR('',#45349,1.); +#45349 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45350 = ORIENTED_EDGE('',*,*,#45351,.F.); +#45351 = EDGE_CURVE('',#45320,#45344,#45352,.T.); +#45352 = LINE('',#45353,#45354); +#45353 = CARTESIAN_POINT('',(0.6,-9.7,5.3)); +#45354 = VECTOR('',#45355,1.); +#45355 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45356 = PLANE('',#45357); +#45357 = AXIS2_PLACEMENT_3D('',#45358,#45359,#45360); +#45358 = CARTESIAN_POINT('',(0.6,-9.55,5.45)); +#45359 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45360 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45361 = ADVANCED_FACE('',(#45362),#45380,.T.); +#45362 = FACE_BOUND('',#45363,.T.); +#45363 = EDGE_LOOP('',(#45364,#45365,#45366,#45374)); +#45364 = ORIENTED_EDGE('',*,*,#45343,.F.); +#45365 = ORIENTED_EDGE('',*,*,#43994,.T.); +#45366 = ORIENTED_EDGE('',*,*,#45367,.T.); +#45367 = EDGE_CURVE('',#43987,#45368,#45370,.T.); +#45368 = VERTEX_POINT('',#45369); +#45369 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#45370 = LINE('',#45371,#45372); +#45371 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#45372 = VECTOR('',#45373,1.); +#45373 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45374 = ORIENTED_EDGE('',*,*,#45375,.F.); +#45375 = EDGE_CURVE('',#45344,#45368,#45376,.T.); +#45376 = LINE('',#45377,#45378); +#45377 = CARTESIAN_POINT('',(-0.3,-9.4,5.3)); +#45378 = VECTOR('',#45379,1.); +#45379 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45380 = PLANE('',#45381); +#45381 = AXIS2_PLACEMENT_3D('',#45382,#45383,#45384); +#45382 = CARTESIAN_POINT('',(-0.45,-9.4,5.45)); +#45383 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45384 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45385 = ADVANCED_FACE('',(#45386),#45397,.T.); +#45386 = FACE_BOUND('',#45387,.T.); +#45387 = EDGE_LOOP('',(#45388,#45389,#45390,#45391)); +#45388 = ORIENTED_EDGE('',*,*,#45367,.F.); +#45389 = ORIENTED_EDGE('',*,*,#43986,.T.); +#45390 = ORIENTED_EDGE('',*,*,#45310,.T.); +#45391 = ORIENTED_EDGE('',*,*,#45392,.F.); +#45392 = EDGE_CURVE('',#45368,#45311,#45393,.T.); +#45393 = LINE('',#45394,#45395); +#45394 = CARTESIAN_POINT('',(-0.6,-10.3,5.3)); +#45395 = VECTOR('',#45396,1.); +#45396 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45397 = PLANE('',#45398); +#45398 = AXIS2_PLACEMENT_3D('',#45399,#45400,#45401); +#45399 = CARTESIAN_POINT('',(-0.6,-10.45,5.45)); +#45400 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45401 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45402 = ADVANCED_FACE('',(#45403),#45428,.T.); +#45403 = FACE_BOUND('',#45404,.T.); +#45404 = EDGE_LOOP('',(#45405,#45413,#45414,#45422)); +#45405 = ORIENTED_EDGE('',*,*,#45406,.F.); +#45406 = EDGE_CURVE('',#44011,#45407,#45409,.T.); +#45407 = VERTEX_POINT('',#45408); +#45408 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#45409 = LINE('',#45410,#45411); +#45410 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#45411 = VECTOR('',#45412,1.); +#45412 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45413 = ORIENTED_EDGE('',*,*,#44010,.T.); +#45414 = ORIENTED_EDGE('',*,*,#45415,.T.); +#45415 = EDGE_CURVE('',#44013,#45416,#45418,.T.); +#45416 = VERTEX_POINT('',#45417); +#45417 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#45418 = LINE('',#45419,#45420); +#45419 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#45420 = VECTOR('',#45421,1.); +#45421 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45422 = ORIENTED_EDGE('',*,*,#45423,.F.); +#45423 = EDGE_CURVE('',#45407,#45416,#45424,.T.); +#45424 = LINE('',#45425,#45426); +#45425 = CARTESIAN_POINT('',(0.3,-8.6,5.3)); +#45426 = VECTOR('',#45427,1.); +#45427 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45428 = PLANE('',#45429); +#45429 = AXIS2_PLACEMENT_3D('',#45430,#45431,#45432); +#45430 = CARTESIAN_POINT('',(0.45,-8.6,5.45)); +#45431 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45432 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45433 = ADVANCED_FACE('',(#45434),#45452,.T.); +#45434 = FACE_BOUND('',#45435,.T.); +#45435 = EDGE_LOOP('',(#45436,#45437,#45438,#45446)); +#45436 = ORIENTED_EDGE('',*,*,#45415,.F.); +#45437 = ORIENTED_EDGE('',*,*,#44036,.T.); +#45438 = ORIENTED_EDGE('',*,*,#45439,.T.); +#45439 = EDGE_CURVE('',#44029,#45440,#45442,.T.); +#45440 = VERTEX_POINT('',#45441); +#45441 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#45442 = LINE('',#45443,#45444); +#45443 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#45444 = VECTOR('',#45445,1.); +#45445 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45446 = ORIENTED_EDGE('',*,*,#45447,.F.); +#45447 = EDGE_CURVE('',#45416,#45440,#45448,.T.); +#45448 = LINE('',#45449,#45450); +#45449 = CARTESIAN_POINT('',(0.6,-7.7,5.3)); +#45450 = VECTOR('',#45451,1.); +#45451 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45452 = PLANE('',#45453); +#45453 = AXIS2_PLACEMENT_3D('',#45454,#45455,#45456); +#45454 = CARTESIAN_POINT('',(0.6,-7.55,5.45)); +#45455 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45456 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45457 = ADVANCED_FACE('',(#45458),#45476,.T.); +#45458 = FACE_BOUND('',#45459,.T.); +#45459 = EDGE_LOOP('',(#45460,#45461,#45462,#45470)); +#45460 = ORIENTED_EDGE('',*,*,#45439,.F.); +#45461 = ORIENTED_EDGE('',*,*,#44028,.T.); +#45462 = ORIENTED_EDGE('',*,*,#45463,.T.); +#45463 = EDGE_CURVE('',#44021,#45464,#45466,.T.); +#45464 = VERTEX_POINT('',#45465); +#45465 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#45466 = LINE('',#45467,#45468); +#45467 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#45468 = VECTOR('',#45469,1.); +#45469 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45470 = ORIENTED_EDGE('',*,*,#45471,.F.); +#45471 = EDGE_CURVE('',#45440,#45464,#45472,.T.); +#45472 = LINE('',#45473,#45474); +#45473 = CARTESIAN_POINT('',(-0.3,-7.4,5.3)); +#45474 = VECTOR('',#45475,1.); +#45475 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45476 = PLANE('',#45477); +#45477 = AXIS2_PLACEMENT_3D('',#45478,#45479,#45480); +#45478 = CARTESIAN_POINT('',(-0.45,-7.4,5.45)); +#45479 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45480 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45481 = ADVANCED_FACE('',(#45482),#45493,.T.); +#45482 = FACE_BOUND('',#45483,.T.); +#45483 = EDGE_LOOP('',(#45484,#45485,#45486,#45487)); +#45484 = ORIENTED_EDGE('',*,*,#45463,.F.); +#45485 = ORIENTED_EDGE('',*,*,#44020,.T.); +#45486 = ORIENTED_EDGE('',*,*,#45406,.T.); +#45487 = ORIENTED_EDGE('',*,*,#45488,.F.); +#45488 = EDGE_CURVE('',#45464,#45407,#45489,.T.); +#45489 = LINE('',#45490,#45491); +#45490 = CARTESIAN_POINT('',(-0.6,-8.3,5.3)); +#45491 = VECTOR('',#45492,1.); +#45492 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45493 = PLANE('',#45494); +#45494 = AXIS2_PLACEMENT_3D('',#45495,#45496,#45497); +#45495 = CARTESIAN_POINT('',(-0.6,-8.45,5.45)); +#45496 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45497 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45498 = ADVANCED_FACE('',(#45499),#45524,.T.); +#45499 = FACE_BOUND('',#45500,.T.); +#45500 = EDGE_LOOP('',(#45501,#45509,#45510,#45518)); +#45501 = ORIENTED_EDGE('',*,*,#45502,.F.); +#45502 = EDGE_CURVE('',#44045,#45503,#45505,.T.); +#45503 = VERTEX_POINT('',#45504); +#45504 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#45505 = LINE('',#45506,#45507); +#45506 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#45507 = VECTOR('',#45508,1.); +#45508 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45509 = ORIENTED_EDGE('',*,*,#44044,.T.); +#45510 = ORIENTED_EDGE('',*,*,#45511,.T.); +#45511 = EDGE_CURVE('',#44047,#45512,#45514,.T.); +#45512 = VERTEX_POINT('',#45513); +#45513 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#45514 = LINE('',#45515,#45516); +#45515 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#45516 = VECTOR('',#45517,1.); +#45517 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45518 = ORIENTED_EDGE('',*,*,#45519,.F.); +#45519 = EDGE_CURVE('',#45503,#45512,#45520,.T.); +#45520 = LINE('',#45521,#45522); +#45521 = CARTESIAN_POINT('',(0.3,-6.6,5.3)); +#45522 = VECTOR('',#45523,1.); +#45523 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45524 = PLANE('',#45525); +#45525 = AXIS2_PLACEMENT_3D('',#45526,#45527,#45528); +#45526 = CARTESIAN_POINT('',(0.45,-6.6,5.45)); +#45527 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45528 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45529 = ADVANCED_FACE('',(#45530),#45548,.T.); +#45530 = FACE_BOUND('',#45531,.T.); +#45531 = EDGE_LOOP('',(#45532,#45533,#45534,#45542)); +#45532 = ORIENTED_EDGE('',*,*,#45511,.F.); +#45533 = ORIENTED_EDGE('',*,*,#44070,.T.); +#45534 = ORIENTED_EDGE('',*,*,#45535,.T.); +#45535 = EDGE_CURVE('',#44063,#45536,#45538,.T.); +#45536 = VERTEX_POINT('',#45537); +#45537 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#45538 = LINE('',#45539,#45540); +#45539 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#45540 = VECTOR('',#45541,1.); +#45541 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45542 = ORIENTED_EDGE('',*,*,#45543,.F.); +#45543 = EDGE_CURVE('',#45512,#45536,#45544,.T.); +#45544 = LINE('',#45545,#45546); +#45545 = CARTESIAN_POINT('',(0.6,-5.7,5.3)); +#45546 = VECTOR('',#45547,1.); +#45547 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45548 = PLANE('',#45549); +#45549 = AXIS2_PLACEMENT_3D('',#45550,#45551,#45552); +#45550 = CARTESIAN_POINT('',(0.6,-5.55,5.45)); +#45551 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45552 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45553 = ADVANCED_FACE('',(#45554),#45572,.T.); +#45554 = FACE_BOUND('',#45555,.T.); +#45555 = EDGE_LOOP('',(#45556,#45557,#45558,#45566)); +#45556 = ORIENTED_EDGE('',*,*,#45535,.F.); +#45557 = ORIENTED_EDGE('',*,*,#44062,.T.); +#45558 = ORIENTED_EDGE('',*,*,#45559,.T.); +#45559 = EDGE_CURVE('',#44055,#45560,#45562,.T.); +#45560 = VERTEX_POINT('',#45561); +#45561 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#45562 = LINE('',#45563,#45564); +#45563 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#45564 = VECTOR('',#45565,1.); +#45565 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45566 = ORIENTED_EDGE('',*,*,#45567,.F.); +#45567 = EDGE_CURVE('',#45536,#45560,#45568,.T.); +#45568 = LINE('',#45569,#45570); +#45569 = CARTESIAN_POINT('',(-0.3,-5.4,5.3)); +#45570 = VECTOR('',#45571,1.); +#45571 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45572 = PLANE('',#45573); +#45573 = AXIS2_PLACEMENT_3D('',#45574,#45575,#45576); +#45574 = CARTESIAN_POINT('',(-0.45,-5.4,5.45)); +#45575 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45576 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45577 = ADVANCED_FACE('',(#45578),#45589,.T.); +#45578 = FACE_BOUND('',#45579,.T.); +#45579 = EDGE_LOOP('',(#45580,#45581,#45582,#45583)); +#45580 = ORIENTED_EDGE('',*,*,#45559,.F.); +#45581 = ORIENTED_EDGE('',*,*,#44054,.T.); +#45582 = ORIENTED_EDGE('',*,*,#45502,.T.); +#45583 = ORIENTED_EDGE('',*,*,#45584,.F.); +#45584 = EDGE_CURVE('',#45560,#45503,#45585,.T.); +#45585 = LINE('',#45586,#45587); +#45586 = CARTESIAN_POINT('',(-0.6,-6.3,5.3)); +#45587 = VECTOR('',#45588,1.); +#45588 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45589 = PLANE('',#45590); +#45590 = AXIS2_PLACEMENT_3D('',#45591,#45592,#45593); +#45591 = CARTESIAN_POINT('',(-0.6,-6.45,5.45)); +#45592 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45593 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45594 = ADVANCED_FACE('',(#45595),#45620,.T.); +#45595 = FACE_BOUND('',#45596,.T.); +#45596 = EDGE_LOOP('',(#45597,#45605,#45606,#45614)); +#45597 = ORIENTED_EDGE('',*,*,#45598,.F.); +#45598 = EDGE_CURVE('',#44079,#45599,#45601,.T.); +#45599 = VERTEX_POINT('',#45600); +#45600 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#45601 = LINE('',#45602,#45603); +#45602 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#45603 = VECTOR('',#45604,1.); +#45604 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45605 = ORIENTED_EDGE('',*,*,#44078,.T.); +#45606 = ORIENTED_EDGE('',*,*,#45607,.T.); +#45607 = EDGE_CURVE('',#44081,#45608,#45610,.T.); +#45608 = VERTEX_POINT('',#45609); +#45609 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#45610 = LINE('',#45611,#45612); +#45611 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#45612 = VECTOR('',#45613,1.); +#45613 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45614 = ORIENTED_EDGE('',*,*,#45615,.F.); +#45615 = EDGE_CURVE('',#45599,#45608,#45616,.T.); +#45616 = LINE('',#45617,#45618); +#45617 = CARTESIAN_POINT('',(0.3,-4.6,5.3)); +#45618 = VECTOR('',#45619,1.); +#45619 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45620 = PLANE('',#45621); +#45621 = AXIS2_PLACEMENT_3D('',#45622,#45623,#45624); +#45622 = CARTESIAN_POINT('',(0.45,-4.6,5.45)); +#45623 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45624 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45625 = ADVANCED_FACE('',(#45626),#45644,.T.); +#45626 = FACE_BOUND('',#45627,.T.); +#45627 = EDGE_LOOP('',(#45628,#45629,#45630,#45638)); +#45628 = ORIENTED_EDGE('',*,*,#45607,.F.); +#45629 = ORIENTED_EDGE('',*,*,#44104,.T.); +#45630 = ORIENTED_EDGE('',*,*,#45631,.T.); +#45631 = EDGE_CURVE('',#44097,#45632,#45634,.T.); +#45632 = VERTEX_POINT('',#45633); +#45633 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#45634 = LINE('',#45635,#45636); +#45635 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#45636 = VECTOR('',#45637,1.); +#45637 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45638 = ORIENTED_EDGE('',*,*,#45639,.F.); +#45639 = EDGE_CURVE('',#45608,#45632,#45640,.T.); +#45640 = LINE('',#45641,#45642); +#45641 = CARTESIAN_POINT('',(0.6,-3.7,5.3)); +#45642 = VECTOR('',#45643,1.); +#45643 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45644 = PLANE('',#45645); +#45645 = AXIS2_PLACEMENT_3D('',#45646,#45647,#45648); +#45646 = CARTESIAN_POINT('',(0.6,-3.55,5.45)); +#45647 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45648 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45649 = ADVANCED_FACE('',(#45650),#45668,.T.); +#45650 = FACE_BOUND('',#45651,.T.); +#45651 = EDGE_LOOP('',(#45652,#45653,#45654,#45662)); +#45652 = ORIENTED_EDGE('',*,*,#45631,.F.); +#45653 = ORIENTED_EDGE('',*,*,#44096,.T.); +#45654 = ORIENTED_EDGE('',*,*,#45655,.T.); +#45655 = EDGE_CURVE('',#44089,#45656,#45658,.T.); +#45656 = VERTEX_POINT('',#45657); +#45657 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#45658 = LINE('',#45659,#45660); +#45659 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#45660 = VECTOR('',#45661,1.); +#45661 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45662 = ORIENTED_EDGE('',*,*,#45663,.F.); +#45663 = EDGE_CURVE('',#45632,#45656,#45664,.T.); +#45664 = LINE('',#45665,#45666); +#45665 = CARTESIAN_POINT('',(-0.3,-3.4,5.3)); +#45666 = VECTOR('',#45667,1.); +#45667 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45668 = PLANE('',#45669); +#45669 = AXIS2_PLACEMENT_3D('',#45670,#45671,#45672); +#45670 = CARTESIAN_POINT('',(-0.45,-3.4,5.45)); +#45671 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45672 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45673 = ADVANCED_FACE('',(#45674),#45685,.T.); +#45674 = FACE_BOUND('',#45675,.T.); +#45675 = EDGE_LOOP('',(#45676,#45677,#45678,#45679)); +#45676 = ORIENTED_EDGE('',*,*,#45655,.F.); +#45677 = ORIENTED_EDGE('',*,*,#44088,.T.); +#45678 = ORIENTED_EDGE('',*,*,#45598,.T.); +#45679 = ORIENTED_EDGE('',*,*,#45680,.F.); +#45680 = EDGE_CURVE('',#45656,#45599,#45681,.T.); +#45681 = LINE('',#45682,#45683); +#45682 = CARTESIAN_POINT('',(-0.6,-4.3,5.3)); +#45683 = VECTOR('',#45684,1.); +#45684 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45685 = PLANE('',#45686); +#45686 = AXIS2_PLACEMENT_3D('',#45687,#45688,#45689); +#45687 = CARTESIAN_POINT('',(-0.6,-4.45,5.45)); +#45688 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45689 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45690 = ADVANCED_FACE('',(#45691),#45716,.T.); +#45691 = FACE_BOUND('',#45692,.T.); +#45692 = EDGE_LOOP('',(#45693,#45701,#45702,#45710)); +#45693 = ORIENTED_EDGE('',*,*,#45694,.F.); +#45694 = EDGE_CURVE('',#44113,#45695,#45697,.T.); +#45695 = VERTEX_POINT('',#45696); +#45696 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#45697 = LINE('',#45698,#45699); +#45698 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#45699 = VECTOR('',#45700,1.); +#45700 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45701 = ORIENTED_EDGE('',*,*,#44112,.T.); +#45702 = ORIENTED_EDGE('',*,*,#45703,.T.); +#45703 = EDGE_CURVE('',#44115,#45704,#45706,.T.); +#45704 = VERTEX_POINT('',#45705); +#45705 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#45706 = LINE('',#45707,#45708); +#45707 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#45708 = VECTOR('',#45709,1.); +#45709 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45710 = ORIENTED_EDGE('',*,*,#45711,.F.); +#45711 = EDGE_CURVE('',#45695,#45704,#45712,.T.); +#45712 = LINE('',#45713,#45714); +#45713 = CARTESIAN_POINT('',(0.3,-2.6,5.3)); +#45714 = VECTOR('',#45715,1.); +#45715 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45716 = PLANE('',#45717); +#45717 = AXIS2_PLACEMENT_3D('',#45718,#45719,#45720); +#45718 = CARTESIAN_POINT('',(0.45,-2.6,5.45)); +#45719 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45720 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45721 = ADVANCED_FACE('',(#45722),#45740,.T.); +#45722 = FACE_BOUND('',#45723,.T.); +#45723 = EDGE_LOOP('',(#45724,#45725,#45726,#45734)); +#45724 = ORIENTED_EDGE('',*,*,#45703,.F.); +#45725 = ORIENTED_EDGE('',*,*,#44138,.T.); +#45726 = ORIENTED_EDGE('',*,*,#45727,.T.); +#45727 = EDGE_CURVE('',#44131,#45728,#45730,.T.); +#45728 = VERTEX_POINT('',#45729); +#45729 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#45730 = LINE('',#45731,#45732); +#45731 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#45732 = VECTOR('',#45733,1.); +#45733 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45734 = ORIENTED_EDGE('',*,*,#45735,.F.); +#45735 = EDGE_CURVE('',#45704,#45728,#45736,.T.); +#45736 = LINE('',#45737,#45738); +#45737 = CARTESIAN_POINT('',(0.6,-1.7,5.3)); +#45738 = VECTOR('',#45739,1.); +#45739 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45740 = PLANE('',#45741); +#45741 = AXIS2_PLACEMENT_3D('',#45742,#45743,#45744); +#45742 = CARTESIAN_POINT('',(0.6,-1.55,5.45)); +#45743 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45744 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45745 = ADVANCED_FACE('',(#45746),#45764,.T.); +#45746 = FACE_BOUND('',#45747,.T.); +#45747 = EDGE_LOOP('',(#45748,#45749,#45750,#45758)); +#45748 = ORIENTED_EDGE('',*,*,#45727,.F.); +#45749 = ORIENTED_EDGE('',*,*,#44130,.T.); +#45750 = ORIENTED_EDGE('',*,*,#45751,.T.); +#45751 = EDGE_CURVE('',#44123,#45752,#45754,.T.); +#45752 = VERTEX_POINT('',#45753); +#45753 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#45754 = LINE('',#45755,#45756); +#45755 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#45756 = VECTOR('',#45757,1.); +#45757 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45758 = ORIENTED_EDGE('',*,*,#45759,.F.); +#45759 = EDGE_CURVE('',#45728,#45752,#45760,.T.); +#45760 = LINE('',#45761,#45762); +#45761 = CARTESIAN_POINT('',(-0.3,-1.4,5.3)); +#45762 = VECTOR('',#45763,1.); +#45763 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45764 = PLANE('',#45765); +#45765 = AXIS2_PLACEMENT_3D('',#45766,#45767,#45768); +#45766 = CARTESIAN_POINT('',(-0.45,-1.4,5.45)); +#45767 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45768 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45769 = ADVANCED_FACE('',(#45770),#45781,.T.); +#45770 = FACE_BOUND('',#45771,.T.); +#45771 = EDGE_LOOP('',(#45772,#45773,#45774,#45775)); +#45772 = ORIENTED_EDGE('',*,*,#45751,.F.); +#45773 = ORIENTED_EDGE('',*,*,#44122,.T.); +#45774 = ORIENTED_EDGE('',*,*,#45694,.T.); +#45775 = ORIENTED_EDGE('',*,*,#45776,.F.); +#45776 = EDGE_CURVE('',#45752,#45695,#45777,.T.); +#45777 = LINE('',#45778,#45779); +#45778 = CARTESIAN_POINT('',(-0.6,-2.3,5.3)); +#45779 = VECTOR('',#45780,1.); +#45780 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45781 = PLANE('',#45782); +#45782 = AXIS2_PLACEMENT_3D('',#45783,#45784,#45785); +#45783 = CARTESIAN_POINT('',(-0.6,-2.45,5.45)); +#45784 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45785 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45786 = ADVANCED_FACE('',(#45787),#45812,.T.); +#45787 = FACE_BOUND('',#45788,.T.); +#45788 = EDGE_LOOP('',(#45789,#45797,#45798,#45806)); +#45789 = ORIENTED_EDGE('',*,*,#45790,.F.); +#45790 = EDGE_CURVE('',#44147,#45791,#45793,.T.); +#45791 = VERTEX_POINT('',#45792); +#45792 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#45793 = LINE('',#45794,#45795); +#45794 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#45795 = VECTOR('',#45796,1.); +#45796 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45797 = ORIENTED_EDGE('',*,*,#44146,.T.); +#45798 = ORIENTED_EDGE('',*,*,#45799,.T.); +#45799 = EDGE_CURVE('',#44149,#45800,#45802,.T.); +#45800 = VERTEX_POINT('',#45801); +#45801 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#45802 = LINE('',#45803,#45804); +#45803 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#45804 = VECTOR('',#45805,1.); +#45805 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45806 = ORIENTED_EDGE('',*,*,#45807,.F.); +#45807 = EDGE_CURVE('',#45791,#45800,#45808,.T.); +#45808 = LINE('',#45809,#45810); +#45809 = CARTESIAN_POINT('',(0.3,-0.6,5.3)); +#45810 = VECTOR('',#45811,1.); +#45811 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45812 = PLANE('',#45813); +#45813 = AXIS2_PLACEMENT_3D('',#45814,#45815,#45816); +#45814 = CARTESIAN_POINT('',(0.45,-0.6,5.45)); +#45815 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45816 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45817 = ADVANCED_FACE('',(#45818),#45836,.T.); +#45818 = FACE_BOUND('',#45819,.T.); +#45819 = EDGE_LOOP('',(#45820,#45821,#45822,#45830)); +#45820 = ORIENTED_EDGE('',*,*,#45799,.F.); +#45821 = ORIENTED_EDGE('',*,*,#44172,.T.); +#45822 = ORIENTED_EDGE('',*,*,#45823,.T.); +#45823 = EDGE_CURVE('',#44165,#45824,#45826,.T.); +#45824 = VERTEX_POINT('',#45825); +#45825 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#45826 = LINE('',#45827,#45828); +#45827 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#45828 = VECTOR('',#45829,1.); +#45829 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45830 = ORIENTED_EDGE('',*,*,#45831,.F.); +#45831 = EDGE_CURVE('',#45800,#45824,#45832,.T.); +#45832 = LINE('',#45833,#45834); +#45833 = CARTESIAN_POINT('',(0.6,0.3,5.3)); +#45834 = VECTOR('',#45835,1.); +#45835 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45836 = PLANE('',#45837); +#45837 = AXIS2_PLACEMENT_3D('',#45838,#45839,#45840); +#45838 = CARTESIAN_POINT('',(0.6,0.45,5.45)); +#45839 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45840 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45841 = ADVANCED_FACE('',(#45842),#45860,.T.); +#45842 = FACE_BOUND('',#45843,.T.); +#45843 = EDGE_LOOP('',(#45844,#45845,#45846,#45854)); +#45844 = ORIENTED_EDGE('',*,*,#45823,.F.); +#45845 = ORIENTED_EDGE('',*,*,#44164,.T.); +#45846 = ORIENTED_EDGE('',*,*,#45847,.T.); +#45847 = EDGE_CURVE('',#44157,#45848,#45850,.T.); +#45848 = VERTEX_POINT('',#45849); +#45849 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#45850 = LINE('',#45851,#45852); +#45851 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#45852 = VECTOR('',#45853,1.); +#45853 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45854 = ORIENTED_EDGE('',*,*,#45855,.F.); +#45855 = EDGE_CURVE('',#45824,#45848,#45856,.T.); +#45856 = LINE('',#45857,#45858); +#45857 = CARTESIAN_POINT('',(-0.3,0.6,5.3)); +#45858 = VECTOR('',#45859,1.); +#45859 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45860 = PLANE('',#45861); +#45861 = AXIS2_PLACEMENT_3D('',#45862,#45863,#45864); +#45862 = CARTESIAN_POINT('',(-0.45,0.6,5.45)); +#45863 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45864 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45865 = ADVANCED_FACE('',(#45866),#45877,.T.); +#45866 = FACE_BOUND('',#45867,.T.); +#45867 = EDGE_LOOP('',(#45868,#45869,#45870,#45871)); +#45868 = ORIENTED_EDGE('',*,*,#45847,.F.); +#45869 = ORIENTED_EDGE('',*,*,#44156,.T.); +#45870 = ORIENTED_EDGE('',*,*,#45790,.T.); +#45871 = ORIENTED_EDGE('',*,*,#45872,.F.); +#45872 = EDGE_CURVE('',#45848,#45791,#45873,.T.); +#45873 = LINE('',#45874,#45875); +#45874 = CARTESIAN_POINT('',(-0.6,-0.3,5.3)); +#45875 = VECTOR('',#45876,1.); +#45876 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45877 = PLANE('',#45878); +#45878 = AXIS2_PLACEMENT_3D('',#45879,#45880,#45881); +#45879 = CARTESIAN_POINT('',(-0.6,-0.45,5.45)); +#45880 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45881 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45882 = ADVANCED_FACE('',(#45883),#45894,.T.); +#45883 = FACE_BOUND('',#45884,.T.); +#45884 = EDGE_LOOP('',(#45885,#45886,#45887,#45893)); +#45885 = ORIENTED_EDGE('',*,*,#44236,.F.); +#45886 = ORIENTED_EDGE('',*,*,#44246,.T.); +#45887 = ORIENTED_EDGE('',*,*,#45888,.T.); +#45888 = EDGE_CURVE('',#44247,#44287,#45889,.T.); +#45889 = LINE('',#45890,#45891); +#45890 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#45891 = VECTOR('',#45892,1.); +#45892 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45893 = ORIENTED_EDGE('',*,*,#44294,.T.); +#45894 = PLANE('',#45895); +#45895 = AXIS2_PLACEMENT_3D('',#45896,#45897,#45898); +#45896 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#45897 = DIRECTION('',(0.,-0.,-1.)); +#45898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45899 = ADVANCED_FACE('',(#45900),#45941,.F.); +#45900 = FACE_BOUND('',#45901,.F.); +#45901 = EDGE_LOOP('',(#45902,#45910,#45911,#45919,#45927,#45935)); +#45902 = ORIENTED_EDGE('',*,*,#45903,.T.); +#45903 = EDGE_CURVE('',#45904,#44287,#45906,.T.); +#45904 = VERTEX_POINT('',#45905); +#45905 = CARTESIAN_POINT('',(0.1,-18.3,-2.1)); +#45906 = LINE('',#45907,#45908); +#45907 = CARTESIAN_POINT('',(0.1,-18.3,-2.1)); +#45908 = VECTOR('',#45909,1.); +#45909 = DIRECTION('',(0.,0.,1.)); +#45910 = ORIENTED_EDGE('',*,*,#44286,.F.); +#45911 = ORIENTED_EDGE('',*,*,#45912,.T.); +#45912 = EDGE_CURVE('',#44279,#45913,#45915,.T.); +#45913 = VERTEX_POINT('',#45914); +#45914 = CARTESIAN_POINT('',(0.1,-17.7,-2.1)); +#45915 = LINE('',#45916,#45917); +#45916 = CARTESIAN_POINT('',(0.1,-17.7,0.2)); +#45917 = VECTOR('',#45918,1.); +#45918 = DIRECTION('',(0.,0.,-1.)); +#45919 = ORIENTED_EDGE('',*,*,#45920,.T.); +#45920 = EDGE_CURVE('',#45913,#45921,#45923,.T.); +#45921 = VERTEX_POINT('',#45922); +#45922 = CARTESIAN_POINT('',(0.1,-17.85,-2.7)); +#45923 = LINE('',#45924,#45925); +#45924 = CARTESIAN_POINT('',(0.1,-17.7,-2.1)); +#45925 = VECTOR('',#45926,1.); +#45926 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#45927 = ORIENTED_EDGE('',*,*,#45928,.T.); +#45928 = EDGE_CURVE('',#45921,#45929,#45931,.T.); +#45929 = VERTEX_POINT('',#45930); +#45930 = CARTESIAN_POINT('',(0.1,-18.15,-2.7)); +#45931 = LINE('',#45932,#45933); +#45932 = CARTESIAN_POINT('',(0.1,-17.85,-2.7)); +#45933 = VECTOR('',#45934,1.); +#45934 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45935 = ORIENTED_EDGE('',*,*,#45936,.T.); +#45936 = EDGE_CURVE('',#45929,#45904,#45937,.T.); +#45937 = LINE('',#45938,#45939); +#45938 = CARTESIAN_POINT('',(0.1,-18.15,-2.7)); +#45939 = VECTOR('',#45940,1.); +#45940 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#45941 = PLANE('',#45942); +#45942 = AXIS2_PLACEMENT_3D('',#45943,#45944,#45945); +#45943 = CARTESIAN_POINT('',(0.1,-18.,2.448597401424)); +#45944 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45945 = DIRECTION('',(0.,0.,1.)); +#45946 = ADVANCED_FACE('',(#45947),#45958,.T.); +#45947 = FACE_BOUND('',#45948,.T.); +#45948 = EDGE_LOOP('',(#45949,#45955,#45956,#45957)); +#45949 = ORIENTED_EDGE('',*,*,#45950,.F.); +#45950 = EDGE_CURVE('',#44255,#44279,#45951,.T.); +#45951 = LINE('',#45952,#45953); +#45952 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#45953 = VECTOR('',#45954,1.); +#45954 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45955 = ORIENTED_EDGE('',*,*,#44262,.T.); +#45956 = ORIENTED_EDGE('',*,*,#44270,.T.); +#45957 = ORIENTED_EDGE('',*,*,#44278,.T.); +#45958 = PLANE('',#45959); +#45959 = AXIS2_PLACEMENT_3D('',#45960,#45961,#45962); +#45960 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#45961 = DIRECTION('',(0.,-0.,-1.)); +#45962 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45963 = ADVANCED_FACE('',(#45964),#46005,.T.); +#45964 = FACE_BOUND('',#45965,.T.); +#45965 = EDGE_LOOP('',(#45966,#45974,#45975,#45983,#45991,#45999)); +#45966 = ORIENTED_EDGE('',*,*,#45967,.T.); +#45967 = EDGE_CURVE('',#45968,#44247,#45970,.T.); +#45968 = VERTEX_POINT('',#45969); +#45969 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#45970 = LINE('',#45971,#45972); +#45971 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#45972 = VECTOR('',#45973,1.); +#45973 = DIRECTION('',(0.,0.,1.)); +#45974 = ORIENTED_EDGE('',*,*,#44254,.F.); +#45975 = ORIENTED_EDGE('',*,*,#45976,.T.); +#45976 = EDGE_CURVE('',#44255,#45977,#45979,.T.); +#45977 = VERTEX_POINT('',#45978); +#45978 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#45979 = LINE('',#45980,#45981); +#45980 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#45981 = VECTOR('',#45982,1.); +#45982 = DIRECTION('',(0.,0.,-1.)); +#45983 = ORIENTED_EDGE('',*,*,#45984,.T.); +#45984 = EDGE_CURVE('',#45977,#45985,#45987,.T.); +#45985 = VERTEX_POINT('',#45986); +#45986 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#45987 = LINE('',#45988,#45989); +#45988 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#45989 = VECTOR('',#45990,1.); +#45990 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#45991 = ORIENTED_EDGE('',*,*,#45992,.F.); +#45992 = EDGE_CURVE('',#45993,#45985,#45995,.T.); +#45993 = VERTEX_POINT('',#45994); +#45994 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#45995 = LINE('',#45996,#45997); +#45996 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#45997 = VECTOR('',#45998,1.); +#45998 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45999 = ORIENTED_EDGE('',*,*,#46000,.T.); +#46000 = EDGE_CURVE('',#45993,#45968,#46001,.T.); +#46001 = LINE('',#46002,#46003); +#46002 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#46003 = VECTOR('',#46004,1.); +#46004 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46005 = PLANE('',#46006); +#46006 = AXIS2_PLACEMENT_3D('',#46007,#46008,#46009); +#46007 = CARTESIAN_POINT('',(-0.1,-18.,2.448597401424)); +#46008 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46009 = DIRECTION('',(0.,0.,1.)); +#46010 = ADVANCED_FACE('',(#46011),#46022,.T.); +#46011 = FACE_BOUND('',#46012,.T.); +#46012 = EDGE_LOOP('',(#46013,#46014,#46015,#46021)); +#46013 = ORIENTED_EDGE('',*,*,#44302,.F.); +#46014 = ORIENTED_EDGE('',*,*,#44312,.T.); +#46015 = ORIENTED_EDGE('',*,*,#46016,.T.); +#46016 = EDGE_CURVE('',#44313,#44353,#46017,.T.); +#46017 = LINE('',#46018,#46019); +#46018 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#46019 = VECTOR('',#46020,1.); +#46020 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46021 = ORIENTED_EDGE('',*,*,#44360,.T.); +#46022 = PLANE('',#46023); +#46023 = AXIS2_PLACEMENT_3D('',#46024,#46025,#46026); +#46024 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#46025 = DIRECTION('',(0.,-0.,-1.)); +#46026 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46027 = ADVANCED_FACE('',(#46028),#46069,.F.); +#46028 = FACE_BOUND('',#46029,.F.); +#46029 = EDGE_LOOP('',(#46030,#46038,#46039,#46047,#46055,#46063)); +#46030 = ORIENTED_EDGE('',*,*,#46031,.T.); +#46031 = EDGE_CURVE('',#46032,#44353,#46034,.T.); +#46032 = VERTEX_POINT('',#46033); +#46033 = CARTESIAN_POINT('',(0.1,-16.3,-2.1)); +#46034 = LINE('',#46035,#46036); +#46035 = CARTESIAN_POINT('',(0.1,-16.3,-2.1)); +#46036 = VECTOR('',#46037,1.); +#46037 = DIRECTION('',(0.,0.,1.)); +#46038 = ORIENTED_EDGE('',*,*,#44352,.F.); +#46039 = ORIENTED_EDGE('',*,*,#46040,.T.); +#46040 = EDGE_CURVE('',#44345,#46041,#46043,.T.); +#46041 = VERTEX_POINT('',#46042); +#46042 = CARTESIAN_POINT('',(0.1,-15.7,-2.1)); +#46043 = LINE('',#46044,#46045); +#46044 = CARTESIAN_POINT('',(0.1,-15.7,0.2)); +#46045 = VECTOR('',#46046,1.); +#46046 = DIRECTION('',(0.,0.,-1.)); +#46047 = ORIENTED_EDGE('',*,*,#46048,.T.); +#46048 = EDGE_CURVE('',#46041,#46049,#46051,.T.); +#46049 = VERTEX_POINT('',#46050); +#46050 = CARTESIAN_POINT('',(0.1,-15.85,-2.7)); +#46051 = LINE('',#46052,#46053); +#46052 = CARTESIAN_POINT('',(0.1,-15.7,-2.1)); +#46053 = VECTOR('',#46054,1.); +#46054 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46055 = ORIENTED_EDGE('',*,*,#46056,.T.); +#46056 = EDGE_CURVE('',#46049,#46057,#46059,.T.); +#46057 = VERTEX_POINT('',#46058); +#46058 = CARTESIAN_POINT('',(0.1,-16.15,-2.7)); +#46059 = LINE('',#46060,#46061); +#46060 = CARTESIAN_POINT('',(0.1,-15.85,-2.7)); +#46061 = VECTOR('',#46062,1.); +#46062 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46063 = ORIENTED_EDGE('',*,*,#46064,.T.); +#46064 = EDGE_CURVE('',#46057,#46032,#46065,.T.); +#46065 = LINE('',#46066,#46067); +#46066 = CARTESIAN_POINT('',(0.1,-16.15,-2.7)); +#46067 = VECTOR('',#46068,1.); +#46068 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46069 = PLANE('',#46070); +#46070 = AXIS2_PLACEMENT_3D('',#46071,#46072,#46073); +#46071 = CARTESIAN_POINT('',(0.1,-16.,2.448597401424)); +#46072 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46073 = DIRECTION('',(0.,0.,1.)); +#46074 = ADVANCED_FACE('',(#46075),#46086,.T.); +#46075 = FACE_BOUND('',#46076,.T.); +#46076 = EDGE_LOOP('',(#46077,#46083,#46084,#46085)); +#46077 = ORIENTED_EDGE('',*,*,#46078,.F.); +#46078 = EDGE_CURVE('',#44321,#44345,#46079,.T.); +#46079 = LINE('',#46080,#46081); +#46080 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#46081 = VECTOR('',#46082,1.); +#46082 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46083 = ORIENTED_EDGE('',*,*,#44328,.T.); +#46084 = ORIENTED_EDGE('',*,*,#44336,.T.); +#46085 = ORIENTED_EDGE('',*,*,#44344,.T.); +#46086 = PLANE('',#46087); +#46087 = AXIS2_PLACEMENT_3D('',#46088,#46089,#46090); +#46088 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#46089 = DIRECTION('',(0.,-0.,-1.)); +#46090 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46091 = ADVANCED_FACE('',(#46092),#46133,.T.); +#46092 = FACE_BOUND('',#46093,.T.); +#46093 = EDGE_LOOP('',(#46094,#46102,#46103,#46111,#46119,#46127)); +#46094 = ORIENTED_EDGE('',*,*,#46095,.T.); +#46095 = EDGE_CURVE('',#46096,#44313,#46098,.T.); +#46096 = VERTEX_POINT('',#46097); +#46097 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#46098 = LINE('',#46099,#46100); +#46099 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#46100 = VECTOR('',#46101,1.); +#46101 = DIRECTION('',(0.,0.,1.)); +#46102 = ORIENTED_EDGE('',*,*,#44320,.F.); +#46103 = ORIENTED_EDGE('',*,*,#46104,.T.); +#46104 = EDGE_CURVE('',#44321,#46105,#46107,.T.); +#46105 = VERTEX_POINT('',#46106); +#46106 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#46107 = LINE('',#46108,#46109); +#46108 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#46109 = VECTOR('',#46110,1.); +#46110 = DIRECTION('',(0.,0.,-1.)); +#46111 = ORIENTED_EDGE('',*,*,#46112,.T.); +#46112 = EDGE_CURVE('',#46105,#46113,#46115,.T.); +#46113 = VERTEX_POINT('',#46114); +#46114 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#46115 = LINE('',#46116,#46117); +#46116 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#46117 = VECTOR('',#46118,1.); +#46118 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46119 = ORIENTED_EDGE('',*,*,#46120,.F.); +#46120 = EDGE_CURVE('',#46121,#46113,#46123,.T.); +#46121 = VERTEX_POINT('',#46122); +#46122 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#46123 = LINE('',#46124,#46125); +#46124 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#46125 = VECTOR('',#46126,1.); +#46126 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46127 = ORIENTED_EDGE('',*,*,#46128,.T.); +#46128 = EDGE_CURVE('',#46121,#46096,#46129,.T.); +#46129 = LINE('',#46130,#46131); +#46130 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#46131 = VECTOR('',#46132,1.); +#46132 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46133 = PLANE('',#46134); +#46134 = AXIS2_PLACEMENT_3D('',#46135,#46136,#46137); +#46135 = CARTESIAN_POINT('',(-0.1,-16.,2.448597401424)); +#46136 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46137 = DIRECTION('',(0.,0.,1.)); +#46138 = ADVANCED_FACE('',(#46139),#46150,.T.); +#46139 = FACE_BOUND('',#46140,.T.); +#46140 = EDGE_LOOP('',(#46141,#46142,#46143,#46149)); +#46141 = ORIENTED_EDGE('',*,*,#44368,.F.); +#46142 = ORIENTED_EDGE('',*,*,#44378,.T.); +#46143 = ORIENTED_EDGE('',*,*,#46144,.T.); +#46144 = EDGE_CURVE('',#44379,#44419,#46145,.T.); +#46145 = LINE('',#46146,#46147); +#46146 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#46147 = VECTOR('',#46148,1.); +#46148 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46149 = ORIENTED_EDGE('',*,*,#44426,.T.); +#46150 = PLANE('',#46151); +#46151 = AXIS2_PLACEMENT_3D('',#46152,#46153,#46154); +#46152 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#46153 = DIRECTION('',(0.,-0.,-1.)); +#46154 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46155 = ADVANCED_FACE('',(#46156),#46197,.F.); +#46156 = FACE_BOUND('',#46157,.F.); +#46157 = EDGE_LOOP('',(#46158,#46166,#46167,#46175,#46183,#46191)); +#46158 = ORIENTED_EDGE('',*,*,#46159,.T.); +#46159 = EDGE_CURVE('',#46160,#44419,#46162,.T.); +#46160 = VERTEX_POINT('',#46161); +#46161 = CARTESIAN_POINT('',(0.1,-14.3,-2.1)); +#46162 = LINE('',#46163,#46164); +#46163 = CARTESIAN_POINT('',(0.1,-14.3,-2.1)); +#46164 = VECTOR('',#46165,1.); +#46165 = DIRECTION('',(0.,0.,1.)); +#46166 = ORIENTED_EDGE('',*,*,#44418,.F.); +#46167 = ORIENTED_EDGE('',*,*,#46168,.T.); +#46168 = EDGE_CURVE('',#44411,#46169,#46171,.T.); +#46169 = VERTEX_POINT('',#46170); +#46170 = CARTESIAN_POINT('',(0.1,-13.7,-2.1)); +#46171 = LINE('',#46172,#46173); +#46172 = CARTESIAN_POINT('',(0.1,-13.7,0.2)); +#46173 = VECTOR('',#46174,1.); +#46174 = DIRECTION('',(0.,0.,-1.)); +#46175 = ORIENTED_EDGE('',*,*,#46176,.T.); +#46176 = EDGE_CURVE('',#46169,#46177,#46179,.T.); +#46177 = VERTEX_POINT('',#46178); +#46178 = CARTESIAN_POINT('',(0.1,-13.85,-2.7)); +#46179 = LINE('',#46180,#46181); +#46180 = CARTESIAN_POINT('',(0.1,-13.7,-2.1)); +#46181 = VECTOR('',#46182,1.); +#46182 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46183 = ORIENTED_EDGE('',*,*,#46184,.T.); +#46184 = EDGE_CURVE('',#46177,#46185,#46187,.T.); +#46185 = VERTEX_POINT('',#46186); +#46186 = CARTESIAN_POINT('',(0.1,-14.15,-2.7)); +#46187 = LINE('',#46188,#46189); +#46188 = CARTESIAN_POINT('',(0.1,-13.85,-2.7)); +#46189 = VECTOR('',#46190,1.); +#46190 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46191 = ORIENTED_EDGE('',*,*,#46192,.T.); +#46192 = EDGE_CURVE('',#46185,#46160,#46193,.T.); +#46193 = LINE('',#46194,#46195); +#46194 = CARTESIAN_POINT('',(0.1,-14.15,-2.7)); +#46195 = VECTOR('',#46196,1.); +#46196 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46197 = PLANE('',#46198); +#46198 = AXIS2_PLACEMENT_3D('',#46199,#46200,#46201); +#46199 = CARTESIAN_POINT('',(0.1,-14.,2.448597401424)); +#46200 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46201 = DIRECTION('',(0.,0.,1.)); +#46202 = ADVANCED_FACE('',(#46203),#46214,.T.); +#46203 = FACE_BOUND('',#46204,.T.); +#46204 = EDGE_LOOP('',(#46205,#46211,#46212,#46213)); +#46205 = ORIENTED_EDGE('',*,*,#46206,.F.); +#46206 = EDGE_CURVE('',#44387,#44411,#46207,.T.); +#46207 = LINE('',#46208,#46209); +#46208 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#46209 = VECTOR('',#46210,1.); +#46210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46211 = ORIENTED_EDGE('',*,*,#44394,.T.); +#46212 = ORIENTED_EDGE('',*,*,#44402,.T.); +#46213 = ORIENTED_EDGE('',*,*,#44410,.T.); +#46214 = PLANE('',#46215); +#46215 = AXIS2_PLACEMENT_3D('',#46216,#46217,#46218); +#46216 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#46217 = DIRECTION('',(0.,-0.,-1.)); +#46218 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46219 = ADVANCED_FACE('',(#46220),#46261,.T.); +#46220 = FACE_BOUND('',#46221,.T.); +#46221 = EDGE_LOOP('',(#46222,#46230,#46231,#46239,#46247,#46255)); +#46222 = ORIENTED_EDGE('',*,*,#46223,.T.); +#46223 = EDGE_CURVE('',#46224,#44379,#46226,.T.); +#46224 = VERTEX_POINT('',#46225); +#46225 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#46226 = LINE('',#46227,#46228); +#46227 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#46228 = VECTOR('',#46229,1.); +#46229 = DIRECTION('',(0.,0.,1.)); +#46230 = ORIENTED_EDGE('',*,*,#44386,.F.); +#46231 = ORIENTED_EDGE('',*,*,#46232,.T.); +#46232 = EDGE_CURVE('',#44387,#46233,#46235,.T.); +#46233 = VERTEX_POINT('',#46234); +#46234 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#46235 = LINE('',#46236,#46237); +#46236 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#46237 = VECTOR('',#46238,1.); +#46238 = DIRECTION('',(0.,0.,-1.)); +#46239 = ORIENTED_EDGE('',*,*,#46240,.T.); +#46240 = EDGE_CURVE('',#46233,#46241,#46243,.T.); +#46241 = VERTEX_POINT('',#46242); +#46242 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#46243 = LINE('',#46244,#46245); +#46244 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#46245 = VECTOR('',#46246,1.); +#46246 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46247 = ORIENTED_EDGE('',*,*,#46248,.F.); +#46248 = EDGE_CURVE('',#46249,#46241,#46251,.T.); +#46249 = VERTEX_POINT('',#46250); +#46250 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#46251 = LINE('',#46252,#46253); +#46252 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#46253 = VECTOR('',#46254,1.); +#46254 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46255 = ORIENTED_EDGE('',*,*,#46256,.T.); +#46256 = EDGE_CURVE('',#46249,#46224,#46257,.T.); +#46257 = LINE('',#46258,#46259); +#46258 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#46259 = VECTOR('',#46260,1.); +#46260 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46261 = PLANE('',#46262); +#46262 = AXIS2_PLACEMENT_3D('',#46263,#46264,#46265); +#46263 = CARTESIAN_POINT('',(-0.1,-14.,2.448597401424)); +#46264 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46265 = DIRECTION('',(0.,0.,1.)); +#46266 = ADVANCED_FACE('',(#46267),#46278,.T.); +#46267 = FACE_BOUND('',#46268,.T.); +#46268 = EDGE_LOOP('',(#46269,#46270,#46271,#46277)); +#46269 = ORIENTED_EDGE('',*,*,#44434,.F.); +#46270 = ORIENTED_EDGE('',*,*,#44444,.T.); +#46271 = ORIENTED_EDGE('',*,*,#46272,.T.); +#46272 = EDGE_CURVE('',#44445,#44485,#46273,.T.); +#46273 = LINE('',#46274,#46275); +#46274 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#46275 = VECTOR('',#46276,1.); +#46276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46277 = ORIENTED_EDGE('',*,*,#44492,.T.); +#46278 = PLANE('',#46279); +#46279 = AXIS2_PLACEMENT_3D('',#46280,#46281,#46282); +#46280 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#46281 = DIRECTION('',(0.,-0.,-1.)); +#46282 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46283 = ADVANCED_FACE('',(#46284),#46325,.F.); +#46284 = FACE_BOUND('',#46285,.F.); +#46285 = EDGE_LOOP('',(#46286,#46294,#46295,#46303,#46311,#46319)); +#46286 = ORIENTED_EDGE('',*,*,#46287,.T.); +#46287 = EDGE_CURVE('',#46288,#44485,#46290,.T.); +#46288 = VERTEX_POINT('',#46289); +#46289 = CARTESIAN_POINT('',(0.1,-12.3,-2.1)); +#46290 = LINE('',#46291,#46292); +#46291 = CARTESIAN_POINT('',(0.1,-12.3,-2.1)); +#46292 = VECTOR('',#46293,1.); +#46293 = DIRECTION('',(0.,0.,1.)); +#46294 = ORIENTED_EDGE('',*,*,#44484,.F.); +#46295 = ORIENTED_EDGE('',*,*,#46296,.T.); +#46296 = EDGE_CURVE('',#44477,#46297,#46299,.T.); +#46297 = VERTEX_POINT('',#46298); +#46298 = CARTESIAN_POINT('',(0.1,-11.7,-2.1)); +#46299 = LINE('',#46300,#46301); +#46300 = CARTESIAN_POINT('',(0.1,-11.7,0.2)); +#46301 = VECTOR('',#46302,1.); +#46302 = DIRECTION('',(0.,0.,-1.)); +#46303 = ORIENTED_EDGE('',*,*,#46304,.T.); +#46304 = EDGE_CURVE('',#46297,#46305,#46307,.T.); +#46305 = VERTEX_POINT('',#46306); +#46306 = CARTESIAN_POINT('',(0.1,-11.85,-2.7)); +#46307 = LINE('',#46308,#46309); +#46308 = CARTESIAN_POINT('',(0.1,-11.7,-2.1)); +#46309 = VECTOR('',#46310,1.); +#46310 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46311 = ORIENTED_EDGE('',*,*,#46312,.T.); +#46312 = EDGE_CURVE('',#46305,#46313,#46315,.T.); +#46313 = VERTEX_POINT('',#46314); +#46314 = CARTESIAN_POINT('',(0.1,-12.15,-2.7)); +#46315 = LINE('',#46316,#46317); +#46316 = CARTESIAN_POINT('',(0.1,-11.85,-2.7)); +#46317 = VECTOR('',#46318,1.); +#46318 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46319 = ORIENTED_EDGE('',*,*,#46320,.T.); +#46320 = EDGE_CURVE('',#46313,#46288,#46321,.T.); +#46321 = LINE('',#46322,#46323); +#46322 = CARTESIAN_POINT('',(0.1,-12.15,-2.7)); +#46323 = VECTOR('',#46324,1.); +#46324 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46325 = PLANE('',#46326); +#46326 = AXIS2_PLACEMENT_3D('',#46327,#46328,#46329); +#46327 = CARTESIAN_POINT('',(0.1,-12.,2.448597401424)); +#46328 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46329 = DIRECTION('',(0.,0.,1.)); +#46330 = ADVANCED_FACE('',(#46331),#46342,.T.); +#46331 = FACE_BOUND('',#46332,.T.); +#46332 = EDGE_LOOP('',(#46333,#46339,#46340,#46341)); +#46333 = ORIENTED_EDGE('',*,*,#46334,.F.); +#46334 = EDGE_CURVE('',#44453,#44477,#46335,.T.); +#46335 = LINE('',#46336,#46337); +#46336 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#46337 = VECTOR('',#46338,1.); +#46338 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46339 = ORIENTED_EDGE('',*,*,#44460,.T.); +#46340 = ORIENTED_EDGE('',*,*,#44468,.T.); +#46341 = ORIENTED_EDGE('',*,*,#44476,.T.); +#46342 = PLANE('',#46343); +#46343 = AXIS2_PLACEMENT_3D('',#46344,#46345,#46346); +#46344 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#46345 = DIRECTION('',(0.,-0.,-1.)); +#46346 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46347 = ADVANCED_FACE('',(#46348),#46389,.T.); +#46348 = FACE_BOUND('',#46349,.T.); +#46349 = EDGE_LOOP('',(#46350,#46358,#46359,#46367,#46375,#46383)); +#46350 = ORIENTED_EDGE('',*,*,#46351,.T.); +#46351 = EDGE_CURVE('',#46352,#44445,#46354,.T.); +#46352 = VERTEX_POINT('',#46353); +#46353 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#46354 = LINE('',#46355,#46356); +#46355 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#46356 = VECTOR('',#46357,1.); +#46357 = DIRECTION('',(0.,0.,1.)); +#46358 = ORIENTED_EDGE('',*,*,#44452,.F.); +#46359 = ORIENTED_EDGE('',*,*,#46360,.T.); +#46360 = EDGE_CURVE('',#44453,#46361,#46363,.T.); +#46361 = VERTEX_POINT('',#46362); +#46362 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#46363 = LINE('',#46364,#46365); +#46364 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#46365 = VECTOR('',#46366,1.); +#46366 = DIRECTION('',(0.,0.,-1.)); +#46367 = ORIENTED_EDGE('',*,*,#46368,.T.); +#46368 = EDGE_CURVE('',#46361,#46369,#46371,.T.); +#46369 = VERTEX_POINT('',#46370); +#46370 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#46371 = LINE('',#46372,#46373); +#46372 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#46373 = VECTOR('',#46374,1.); +#46374 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46375 = ORIENTED_EDGE('',*,*,#46376,.F.); +#46376 = EDGE_CURVE('',#46377,#46369,#46379,.T.); +#46377 = VERTEX_POINT('',#46378); +#46378 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#46379 = LINE('',#46380,#46381); +#46380 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#46381 = VECTOR('',#46382,1.); +#46382 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46383 = ORIENTED_EDGE('',*,*,#46384,.T.); +#46384 = EDGE_CURVE('',#46377,#46352,#46385,.T.); +#46385 = LINE('',#46386,#46387); +#46386 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#46387 = VECTOR('',#46388,1.); +#46388 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46389 = PLANE('',#46390); +#46390 = AXIS2_PLACEMENT_3D('',#46391,#46392,#46393); +#46391 = CARTESIAN_POINT('',(-0.1,-12.,2.448597401424)); +#46392 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46393 = DIRECTION('',(0.,0.,1.)); +#46394 = ADVANCED_FACE('',(#46395),#46406,.T.); +#46395 = FACE_BOUND('',#46396,.T.); +#46396 = EDGE_LOOP('',(#46397,#46398,#46399,#46405)); +#46397 = ORIENTED_EDGE('',*,*,#44500,.F.); +#46398 = ORIENTED_EDGE('',*,*,#44510,.T.); +#46399 = ORIENTED_EDGE('',*,*,#46400,.T.); +#46400 = EDGE_CURVE('',#44511,#44551,#46401,.T.); +#46401 = LINE('',#46402,#46403); +#46402 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#46403 = VECTOR('',#46404,1.); +#46404 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46405 = ORIENTED_EDGE('',*,*,#44558,.T.); +#46406 = PLANE('',#46407); +#46407 = AXIS2_PLACEMENT_3D('',#46408,#46409,#46410); +#46408 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#46409 = DIRECTION('',(0.,-0.,-1.)); +#46410 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46411 = ADVANCED_FACE('',(#46412),#46453,.F.); +#46412 = FACE_BOUND('',#46413,.F.); +#46413 = EDGE_LOOP('',(#46414,#46422,#46423,#46431,#46439,#46447)); +#46414 = ORIENTED_EDGE('',*,*,#46415,.T.); +#46415 = EDGE_CURVE('',#46416,#44551,#46418,.T.); +#46416 = VERTEX_POINT('',#46417); +#46417 = CARTESIAN_POINT('',(0.1,-10.3,-2.1)); +#46418 = LINE('',#46419,#46420); +#46419 = CARTESIAN_POINT('',(0.1,-10.3,-2.1)); +#46420 = VECTOR('',#46421,1.); +#46421 = DIRECTION('',(0.,0.,1.)); +#46422 = ORIENTED_EDGE('',*,*,#44550,.F.); +#46423 = ORIENTED_EDGE('',*,*,#46424,.T.); +#46424 = EDGE_CURVE('',#44543,#46425,#46427,.T.); +#46425 = VERTEX_POINT('',#46426); +#46426 = CARTESIAN_POINT('',(0.1,-9.7,-2.1)); +#46427 = LINE('',#46428,#46429); +#46428 = CARTESIAN_POINT('',(0.1,-9.7,0.2)); +#46429 = VECTOR('',#46430,1.); +#46430 = DIRECTION('',(0.,0.,-1.)); +#46431 = ORIENTED_EDGE('',*,*,#46432,.T.); +#46432 = EDGE_CURVE('',#46425,#46433,#46435,.T.); +#46433 = VERTEX_POINT('',#46434); +#46434 = CARTESIAN_POINT('',(0.1,-9.85,-2.7)); +#46435 = LINE('',#46436,#46437); +#46436 = CARTESIAN_POINT('',(0.1,-9.7,-2.1)); +#46437 = VECTOR('',#46438,1.); +#46438 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46439 = ORIENTED_EDGE('',*,*,#46440,.T.); +#46440 = EDGE_CURVE('',#46433,#46441,#46443,.T.); +#46441 = VERTEX_POINT('',#46442); +#46442 = CARTESIAN_POINT('',(0.1,-10.15,-2.7)); +#46443 = LINE('',#46444,#46445); +#46444 = CARTESIAN_POINT('',(0.1,-9.85,-2.7)); +#46445 = VECTOR('',#46446,1.); +#46446 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46447 = ORIENTED_EDGE('',*,*,#46448,.T.); +#46448 = EDGE_CURVE('',#46441,#46416,#46449,.T.); +#46449 = LINE('',#46450,#46451); +#46450 = CARTESIAN_POINT('',(0.1,-10.15,-2.7)); +#46451 = VECTOR('',#46452,1.); +#46452 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46453 = PLANE('',#46454); +#46454 = AXIS2_PLACEMENT_3D('',#46455,#46456,#46457); +#46455 = CARTESIAN_POINT('',(0.1,-10.,2.448597401424)); +#46456 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46457 = DIRECTION('',(0.,0.,1.)); +#46458 = ADVANCED_FACE('',(#46459),#46470,.T.); +#46459 = FACE_BOUND('',#46460,.T.); +#46460 = EDGE_LOOP('',(#46461,#46467,#46468,#46469)); +#46461 = ORIENTED_EDGE('',*,*,#46462,.F.); +#46462 = EDGE_CURVE('',#44519,#44543,#46463,.T.); +#46463 = LINE('',#46464,#46465); +#46464 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#46465 = VECTOR('',#46466,1.); +#46466 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46467 = ORIENTED_EDGE('',*,*,#44526,.T.); +#46468 = ORIENTED_EDGE('',*,*,#44534,.T.); +#46469 = ORIENTED_EDGE('',*,*,#44542,.T.); +#46470 = PLANE('',#46471); +#46471 = AXIS2_PLACEMENT_3D('',#46472,#46473,#46474); +#46472 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#46473 = DIRECTION('',(0.,-0.,-1.)); +#46474 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46475 = ADVANCED_FACE('',(#46476),#46517,.T.); +#46476 = FACE_BOUND('',#46477,.T.); +#46477 = EDGE_LOOP('',(#46478,#46486,#46487,#46495,#46503,#46511)); +#46478 = ORIENTED_EDGE('',*,*,#46479,.T.); +#46479 = EDGE_CURVE('',#46480,#44511,#46482,.T.); +#46480 = VERTEX_POINT('',#46481); +#46481 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#46482 = LINE('',#46483,#46484); +#46483 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#46484 = VECTOR('',#46485,1.); +#46485 = DIRECTION('',(0.,0.,1.)); +#46486 = ORIENTED_EDGE('',*,*,#44518,.F.); +#46487 = ORIENTED_EDGE('',*,*,#46488,.T.); +#46488 = EDGE_CURVE('',#44519,#46489,#46491,.T.); +#46489 = VERTEX_POINT('',#46490); +#46490 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#46491 = LINE('',#46492,#46493); +#46492 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#46493 = VECTOR('',#46494,1.); +#46494 = DIRECTION('',(0.,0.,-1.)); +#46495 = ORIENTED_EDGE('',*,*,#46496,.T.); +#46496 = EDGE_CURVE('',#46489,#46497,#46499,.T.); +#46497 = VERTEX_POINT('',#46498); +#46498 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#46499 = LINE('',#46500,#46501); +#46500 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#46501 = VECTOR('',#46502,1.); +#46502 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46503 = ORIENTED_EDGE('',*,*,#46504,.F.); +#46504 = EDGE_CURVE('',#46505,#46497,#46507,.T.); +#46505 = VERTEX_POINT('',#46506); +#46506 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#46507 = LINE('',#46508,#46509); +#46508 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#46509 = VECTOR('',#46510,1.); +#46510 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46511 = ORIENTED_EDGE('',*,*,#46512,.T.); +#46512 = EDGE_CURVE('',#46505,#46480,#46513,.T.); +#46513 = LINE('',#46514,#46515); +#46514 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#46515 = VECTOR('',#46516,1.); +#46516 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46517 = PLANE('',#46518); +#46518 = AXIS2_PLACEMENT_3D('',#46519,#46520,#46521); +#46519 = CARTESIAN_POINT('',(-0.1,-10.,2.448597401424)); +#46520 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46521 = DIRECTION('',(0.,0.,1.)); +#46522 = ADVANCED_FACE('',(#46523),#46534,.T.); +#46523 = FACE_BOUND('',#46524,.T.); +#46524 = EDGE_LOOP('',(#46525,#46526,#46527,#46533)); +#46525 = ORIENTED_EDGE('',*,*,#44566,.F.); +#46526 = ORIENTED_EDGE('',*,*,#44576,.T.); +#46527 = ORIENTED_EDGE('',*,*,#46528,.T.); +#46528 = EDGE_CURVE('',#44577,#44617,#46529,.T.); +#46529 = LINE('',#46530,#46531); +#46530 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#46531 = VECTOR('',#46532,1.); +#46532 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46533 = ORIENTED_EDGE('',*,*,#44624,.T.); +#46534 = PLANE('',#46535); +#46535 = AXIS2_PLACEMENT_3D('',#46536,#46537,#46538); +#46536 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#46537 = DIRECTION('',(0.,-0.,-1.)); +#46538 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46539 = ADVANCED_FACE('',(#46540),#46581,.F.); +#46540 = FACE_BOUND('',#46541,.F.); +#46541 = EDGE_LOOP('',(#46542,#46550,#46551,#46559,#46567,#46575)); +#46542 = ORIENTED_EDGE('',*,*,#46543,.T.); +#46543 = EDGE_CURVE('',#46544,#44617,#46546,.T.); +#46544 = VERTEX_POINT('',#46545); +#46545 = CARTESIAN_POINT('',(0.1,-8.3,-2.1)); +#46546 = LINE('',#46547,#46548); +#46547 = CARTESIAN_POINT('',(0.1,-8.3,-2.1)); +#46548 = VECTOR('',#46549,1.); +#46549 = DIRECTION('',(0.,0.,1.)); +#46550 = ORIENTED_EDGE('',*,*,#44616,.F.); +#46551 = ORIENTED_EDGE('',*,*,#46552,.T.); +#46552 = EDGE_CURVE('',#44609,#46553,#46555,.T.); +#46553 = VERTEX_POINT('',#46554); +#46554 = CARTESIAN_POINT('',(0.1,-7.7,-2.1)); +#46555 = LINE('',#46556,#46557); +#46556 = CARTESIAN_POINT('',(0.1,-7.7,0.2)); +#46557 = VECTOR('',#46558,1.); +#46558 = DIRECTION('',(0.,0.,-1.)); +#46559 = ORIENTED_EDGE('',*,*,#46560,.T.); +#46560 = EDGE_CURVE('',#46553,#46561,#46563,.T.); +#46561 = VERTEX_POINT('',#46562); +#46562 = CARTESIAN_POINT('',(0.1,-7.85,-2.7)); +#46563 = LINE('',#46564,#46565); +#46564 = CARTESIAN_POINT('',(0.1,-7.7,-2.1)); +#46565 = VECTOR('',#46566,1.); +#46566 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46567 = ORIENTED_EDGE('',*,*,#46568,.T.); +#46568 = EDGE_CURVE('',#46561,#46569,#46571,.T.); +#46569 = VERTEX_POINT('',#46570); +#46570 = CARTESIAN_POINT('',(0.1,-8.15,-2.7)); +#46571 = LINE('',#46572,#46573); +#46572 = CARTESIAN_POINT('',(0.1,-7.85,-2.7)); +#46573 = VECTOR('',#46574,1.); +#46574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46575 = ORIENTED_EDGE('',*,*,#46576,.T.); +#46576 = EDGE_CURVE('',#46569,#46544,#46577,.T.); +#46577 = LINE('',#46578,#46579); +#46578 = CARTESIAN_POINT('',(0.1,-8.15,-2.7)); +#46579 = VECTOR('',#46580,1.); +#46580 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46581 = PLANE('',#46582); +#46582 = AXIS2_PLACEMENT_3D('',#46583,#46584,#46585); +#46583 = CARTESIAN_POINT('',(0.1,-8.,2.448597401424)); +#46584 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46585 = DIRECTION('',(0.,0.,1.)); +#46586 = ADVANCED_FACE('',(#46587),#46598,.T.); +#46587 = FACE_BOUND('',#46588,.T.); +#46588 = EDGE_LOOP('',(#46589,#46595,#46596,#46597)); +#46589 = ORIENTED_EDGE('',*,*,#46590,.F.); +#46590 = EDGE_CURVE('',#44585,#44609,#46591,.T.); +#46591 = LINE('',#46592,#46593); +#46592 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#46593 = VECTOR('',#46594,1.); +#46594 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46595 = ORIENTED_EDGE('',*,*,#44592,.T.); +#46596 = ORIENTED_EDGE('',*,*,#44600,.T.); +#46597 = ORIENTED_EDGE('',*,*,#44608,.T.); +#46598 = PLANE('',#46599); +#46599 = AXIS2_PLACEMENT_3D('',#46600,#46601,#46602); +#46600 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#46601 = DIRECTION('',(0.,-0.,-1.)); +#46602 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46603 = ADVANCED_FACE('',(#46604),#46645,.T.); +#46604 = FACE_BOUND('',#46605,.T.); +#46605 = EDGE_LOOP('',(#46606,#46614,#46615,#46623,#46631,#46639)); +#46606 = ORIENTED_EDGE('',*,*,#46607,.T.); +#46607 = EDGE_CURVE('',#46608,#44577,#46610,.T.); +#46608 = VERTEX_POINT('',#46609); +#46609 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#46610 = LINE('',#46611,#46612); +#46611 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#46612 = VECTOR('',#46613,1.); +#46613 = DIRECTION('',(0.,0.,1.)); +#46614 = ORIENTED_EDGE('',*,*,#44584,.F.); +#46615 = ORIENTED_EDGE('',*,*,#46616,.T.); +#46616 = EDGE_CURVE('',#44585,#46617,#46619,.T.); +#46617 = VERTEX_POINT('',#46618); +#46618 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#46619 = LINE('',#46620,#46621); +#46620 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#46621 = VECTOR('',#46622,1.); +#46622 = DIRECTION('',(0.,0.,-1.)); +#46623 = ORIENTED_EDGE('',*,*,#46624,.T.); +#46624 = EDGE_CURVE('',#46617,#46625,#46627,.T.); +#46625 = VERTEX_POINT('',#46626); +#46626 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#46627 = LINE('',#46628,#46629); +#46628 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#46629 = VECTOR('',#46630,1.); +#46630 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46631 = ORIENTED_EDGE('',*,*,#46632,.F.); +#46632 = EDGE_CURVE('',#46633,#46625,#46635,.T.); +#46633 = VERTEX_POINT('',#46634); +#46634 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#46635 = LINE('',#46636,#46637); +#46636 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#46637 = VECTOR('',#46638,1.); +#46638 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46639 = ORIENTED_EDGE('',*,*,#46640,.T.); +#46640 = EDGE_CURVE('',#46633,#46608,#46641,.T.); +#46641 = LINE('',#46642,#46643); +#46642 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#46643 = VECTOR('',#46644,1.); +#46644 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46645 = PLANE('',#46646); +#46646 = AXIS2_PLACEMENT_3D('',#46647,#46648,#46649); +#46647 = CARTESIAN_POINT('',(-0.1,-8.,2.448597401424)); +#46648 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46649 = DIRECTION('',(0.,0.,1.)); +#46650 = ADVANCED_FACE('',(#46651),#46662,.T.); +#46651 = FACE_BOUND('',#46652,.T.); +#46652 = EDGE_LOOP('',(#46653,#46654,#46655,#46661)); +#46653 = ORIENTED_EDGE('',*,*,#44632,.F.); +#46654 = ORIENTED_EDGE('',*,*,#44642,.T.); +#46655 = ORIENTED_EDGE('',*,*,#46656,.T.); +#46656 = EDGE_CURVE('',#44643,#44683,#46657,.T.); +#46657 = LINE('',#46658,#46659); +#46658 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#46659 = VECTOR('',#46660,1.); +#46660 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46661 = ORIENTED_EDGE('',*,*,#44690,.T.); +#46662 = PLANE('',#46663); +#46663 = AXIS2_PLACEMENT_3D('',#46664,#46665,#46666); +#46664 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#46665 = DIRECTION('',(0.,-0.,-1.)); +#46666 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46667 = ADVANCED_FACE('',(#46668),#46709,.F.); +#46668 = FACE_BOUND('',#46669,.F.); +#46669 = EDGE_LOOP('',(#46670,#46678,#46679,#46687,#46695,#46703)); +#46670 = ORIENTED_EDGE('',*,*,#46671,.T.); +#46671 = EDGE_CURVE('',#46672,#44683,#46674,.T.); +#46672 = VERTEX_POINT('',#46673); +#46673 = CARTESIAN_POINT('',(0.1,-6.3,-2.1)); +#46674 = LINE('',#46675,#46676); +#46675 = CARTESIAN_POINT('',(0.1,-6.3,-2.1)); +#46676 = VECTOR('',#46677,1.); +#46677 = DIRECTION('',(0.,0.,1.)); +#46678 = ORIENTED_EDGE('',*,*,#44682,.F.); +#46679 = ORIENTED_EDGE('',*,*,#46680,.T.); +#46680 = EDGE_CURVE('',#44675,#46681,#46683,.T.); +#46681 = VERTEX_POINT('',#46682); +#46682 = CARTESIAN_POINT('',(0.1,-5.7,-2.1)); +#46683 = LINE('',#46684,#46685); +#46684 = CARTESIAN_POINT('',(0.1,-5.7,0.2)); +#46685 = VECTOR('',#46686,1.); +#46686 = DIRECTION('',(0.,0.,-1.)); +#46687 = ORIENTED_EDGE('',*,*,#46688,.T.); +#46688 = EDGE_CURVE('',#46681,#46689,#46691,.T.); +#46689 = VERTEX_POINT('',#46690); +#46690 = CARTESIAN_POINT('',(0.1,-5.85,-2.7)); +#46691 = LINE('',#46692,#46693); +#46692 = CARTESIAN_POINT('',(0.1,-5.7,-2.1)); +#46693 = VECTOR('',#46694,1.); +#46694 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46695 = ORIENTED_EDGE('',*,*,#46696,.T.); +#46696 = EDGE_CURVE('',#46689,#46697,#46699,.T.); +#46697 = VERTEX_POINT('',#46698); +#46698 = CARTESIAN_POINT('',(0.1,-6.15,-2.7)); +#46699 = LINE('',#46700,#46701); +#46700 = CARTESIAN_POINT('',(0.1,-5.85,-2.7)); +#46701 = VECTOR('',#46702,1.); +#46702 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46703 = ORIENTED_EDGE('',*,*,#46704,.T.); +#46704 = EDGE_CURVE('',#46697,#46672,#46705,.T.); +#46705 = LINE('',#46706,#46707); +#46706 = CARTESIAN_POINT('',(0.1,-6.15,-2.7)); +#46707 = VECTOR('',#46708,1.); +#46708 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46709 = PLANE('',#46710); +#46710 = AXIS2_PLACEMENT_3D('',#46711,#46712,#46713); +#46711 = CARTESIAN_POINT('',(0.1,-6.,2.448597401424)); +#46712 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46713 = DIRECTION('',(0.,0.,1.)); +#46714 = ADVANCED_FACE('',(#46715),#46726,.T.); +#46715 = FACE_BOUND('',#46716,.T.); +#46716 = EDGE_LOOP('',(#46717,#46723,#46724,#46725)); +#46717 = ORIENTED_EDGE('',*,*,#46718,.F.); +#46718 = EDGE_CURVE('',#44651,#44675,#46719,.T.); +#46719 = LINE('',#46720,#46721); +#46720 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#46721 = VECTOR('',#46722,1.); +#46722 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46723 = ORIENTED_EDGE('',*,*,#44658,.T.); +#46724 = ORIENTED_EDGE('',*,*,#44666,.T.); +#46725 = ORIENTED_EDGE('',*,*,#44674,.T.); +#46726 = PLANE('',#46727); +#46727 = AXIS2_PLACEMENT_3D('',#46728,#46729,#46730); +#46728 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#46729 = DIRECTION('',(0.,-0.,-1.)); +#46730 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46731 = ADVANCED_FACE('',(#46732),#46773,.T.); +#46732 = FACE_BOUND('',#46733,.T.); +#46733 = EDGE_LOOP('',(#46734,#46742,#46743,#46751,#46759,#46767)); +#46734 = ORIENTED_EDGE('',*,*,#46735,.T.); +#46735 = EDGE_CURVE('',#46736,#44643,#46738,.T.); +#46736 = VERTEX_POINT('',#46737); +#46737 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#46738 = LINE('',#46739,#46740); +#46739 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#46740 = VECTOR('',#46741,1.); +#46741 = DIRECTION('',(0.,0.,1.)); +#46742 = ORIENTED_EDGE('',*,*,#44650,.F.); +#46743 = ORIENTED_EDGE('',*,*,#46744,.T.); +#46744 = EDGE_CURVE('',#44651,#46745,#46747,.T.); +#46745 = VERTEX_POINT('',#46746); +#46746 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#46747 = LINE('',#46748,#46749); +#46748 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#46749 = VECTOR('',#46750,1.); +#46750 = DIRECTION('',(0.,0.,-1.)); +#46751 = ORIENTED_EDGE('',*,*,#46752,.T.); +#46752 = EDGE_CURVE('',#46745,#46753,#46755,.T.); +#46753 = VERTEX_POINT('',#46754); +#46754 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#46755 = LINE('',#46756,#46757); +#46756 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#46757 = VECTOR('',#46758,1.); +#46758 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46759 = ORIENTED_EDGE('',*,*,#46760,.F.); +#46760 = EDGE_CURVE('',#46761,#46753,#46763,.T.); +#46761 = VERTEX_POINT('',#46762); +#46762 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#46763 = LINE('',#46764,#46765); +#46764 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#46765 = VECTOR('',#46766,1.); +#46766 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46767 = ORIENTED_EDGE('',*,*,#46768,.T.); +#46768 = EDGE_CURVE('',#46761,#46736,#46769,.T.); +#46769 = LINE('',#46770,#46771); +#46770 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#46771 = VECTOR('',#46772,1.); +#46772 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46773 = PLANE('',#46774); +#46774 = AXIS2_PLACEMENT_3D('',#46775,#46776,#46777); +#46775 = CARTESIAN_POINT('',(-0.1,-6.,2.448597401424)); +#46776 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46777 = DIRECTION('',(0.,0.,1.)); +#46778 = ADVANCED_FACE('',(#46779),#46790,.T.); +#46779 = FACE_BOUND('',#46780,.T.); +#46780 = EDGE_LOOP('',(#46781,#46782,#46783,#46789)); +#46781 = ORIENTED_EDGE('',*,*,#44698,.F.); +#46782 = ORIENTED_EDGE('',*,*,#44708,.T.); +#46783 = ORIENTED_EDGE('',*,*,#46784,.T.); +#46784 = EDGE_CURVE('',#44709,#44749,#46785,.T.); +#46785 = LINE('',#46786,#46787); +#46786 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#46787 = VECTOR('',#46788,1.); +#46788 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46789 = ORIENTED_EDGE('',*,*,#44756,.T.); +#46790 = PLANE('',#46791); +#46791 = AXIS2_PLACEMENT_3D('',#46792,#46793,#46794); +#46792 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#46793 = DIRECTION('',(0.,-0.,-1.)); +#46794 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46795 = ADVANCED_FACE('',(#46796),#46837,.F.); +#46796 = FACE_BOUND('',#46797,.F.); +#46797 = EDGE_LOOP('',(#46798,#46806,#46807,#46815,#46823,#46831)); +#46798 = ORIENTED_EDGE('',*,*,#46799,.T.); +#46799 = EDGE_CURVE('',#46800,#44749,#46802,.T.); +#46800 = VERTEX_POINT('',#46801); +#46801 = CARTESIAN_POINT('',(0.1,-4.3,-2.1)); +#46802 = LINE('',#46803,#46804); +#46803 = CARTESIAN_POINT('',(0.1,-4.3,-2.1)); +#46804 = VECTOR('',#46805,1.); +#46805 = DIRECTION('',(0.,0.,1.)); +#46806 = ORIENTED_EDGE('',*,*,#44748,.F.); +#46807 = ORIENTED_EDGE('',*,*,#46808,.T.); +#46808 = EDGE_CURVE('',#44741,#46809,#46811,.T.); +#46809 = VERTEX_POINT('',#46810); +#46810 = CARTESIAN_POINT('',(0.1,-3.7,-2.1)); +#46811 = LINE('',#46812,#46813); +#46812 = CARTESIAN_POINT('',(0.1,-3.7,0.2)); +#46813 = VECTOR('',#46814,1.); +#46814 = DIRECTION('',(0.,0.,-1.)); +#46815 = ORIENTED_EDGE('',*,*,#46816,.T.); +#46816 = EDGE_CURVE('',#46809,#46817,#46819,.T.); +#46817 = VERTEX_POINT('',#46818); +#46818 = CARTESIAN_POINT('',(0.1,-3.85,-2.7)); +#46819 = LINE('',#46820,#46821); +#46820 = CARTESIAN_POINT('',(0.1,-3.7,-2.1)); +#46821 = VECTOR('',#46822,1.); +#46822 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46823 = ORIENTED_EDGE('',*,*,#46824,.T.); +#46824 = EDGE_CURVE('',#46817,#46825,#46827,.T.); +#46825 = VERTEX_POINT('',#46826); +#46826 = CARTESIAN_POINT('',(0.1,-4.15,-2.7)); +#46827 = LINE('',#46828,#46829); +#46828 = CARTESIAN_POINT('',(0.1,-3.85,-2.7)); +#46829 = VECTOR('',#46830,1.); +#46830 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46831 = ORIENTED_EDGE('',*,*,#46832,.T.); +#46832 = EDGE_CURVE('',#46825,#46800,#46833,.T.); +#46833 = LINE('',#46834,#46835); +#46834 = CARTESIAN_POINT('',(0.1,-4.15,-2.7)); +#46835 = VECTOR('',#46836,1.); +#46836 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46837 = PLANE('',#46838); +#46838 = AXIS2_PLACEMENT_3D('',#46839,#46840,#46841); +#46839 = CARTESIAN_POINT('',(0.1,-4.,2.448597401424)); +#46840 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46841 = DIRECTION('',(0.,0.,1.)); +#46842 = ADVANCED_FACE('',(#46843),#46854,.T.); +#46843 = FACE_BOUND('',#46844,.T.); +#46844 = EDGE_LOOP('',(#46845,#46851,#46852,#46853)); +#46845 = ORIENTED_EDGE('',*,*,#46846,.F.); +#46846 = EDGE_CURVE('',#44717,#44741,#46847,.T.); +#46847 = LINE('',#46848,#46849); +#46848 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#46849 = VECTOR('',#46850,1.); +#46850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46851 = ORIENTED_EDGE('',*,*,#44724,.T.); +#46852 = ORIENTED_EDGE('',*,*,#44732,.T.); +#46853 = ORIENTED_EDGE('',*,*,#44740,.T.); +#46854 = PLANE('',#46855); +#46855 = AXIS2_PLACEMENT_3D('',#46856,#46857,#46858); +#46856 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#46857 = DIRECTION('',(0.,-0.,-1.)); +#46858 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46859 = ADVANCED_FACE('',(#46860),#46901,.T.); +#46860 = FACE_BOUND('',#46861,.T.); +#46861 = EDGE_LOOP('',(#46862,#46870,#46871,#46879,#46887,#46895)); +#46862 = ORIENTED_EDGE('',*,*,#46863,.T.); +#46863 = EDGE_CURVE('',#46864,#44709,#46866,.T.); +#46864 = VERTEX_POINT('',#46865); +#46865 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#46866 = LINE('',#46867,#46868); +#46867 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#46868 = VECTOR('',#46869,1.); +#46869 = DIRECTION('',(0.,0.,1.)); +#46870 = ORIENTED_EDGE('',*,*,#44716,.F.); +#46871 = ORIENTED_EDGE('',*,*,#46872,.T.); +#46872 = EDGE_CURVE('',#44717,#46873,#46875,.T.); +#46873 = VERTEX_POINT('',#46874); +#46874 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#46875 = LINE('',#46876,#46877); +#46876 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#46877 = VECTOR('',#46878,1.); +#46878 = DIRECTION('',(0.,0.,-1.)); +#46879 = ORIENTED_EDGE('',*,*,#46880,.T.); +#46880 = EDGE_CURVE('',#46873,#46881,#46883,.T.); +#46881 = VERTEX_POINT('',#46882); +#46882 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#46883 = LINE('',#46884,#46885); +#46884 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#46885 = VECTOR('',#46886,1.); +#46886 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46887 = ORIENTED_EDGE('',*,*,#46888,.F.); +#46888 = EDGE_CURVE('',#46889,#46881,#46891,.T.); +#46889 = VERTEX_POINT('',#46890); +#46890 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#46891 = LINE('',#46892,#46893); +#46892 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#46893 = VECTOR('',#46894,1.); +#46894 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46895 = ORIENTED_EDGE('',*,*,#46896,.T.); +#46896 = EDGE_CURVE('',#46889,#46864,#46897,.T.); +#46897 = LINE('',#46898,#46899); +#46898 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#46899 = VECTOR('',#46900,1.); +#46900 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46901 = PLANE('',#46902); +#46902 = AXIS2_PLACEMENT_3D('',#46903,#46904,#46905); +#46903 = CARTESIAN_POINT('',(-0.1,-4.,2.448597401424)); +#46904 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46905 = DIRECTION('',(0.,0.,1.)); +#46906 = ADVANCED_FACE('',(#46907),#46918,.T.); +#46907 = FACE_BOUND('',#46908,.T.); +#46908 = EDGE_LOOP('',(#46909,#46910,#46911,#46917)); +#46909 = ORIENTED_EDGE('',*,*,#44764,.F.); +#46910 = ORIENTED_EDGE('',*,*,#44774,.T.); +#46911 = ORIENTED_EDGE('',*,*,#46912,.T.); +#46912 = EDGE_CURVE('',#44775,#44815,#46913,.T.); +#46913 = LINE('',#46914,#46915); +#46914 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#46915 = VECTOR('',#46916,1.); +#46916 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46917 = ORIENTED_EDGE('',*,*,#44822,.T.); +#46918 = PLANE('',#46919); +#46919 = AXIS2_PLACEMENT_3D('',#46920,#46921,#46922); +#46920 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#46921 = DIRECTION('',(0.,-0.,-1.)); +#46922 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46923 = ADVANCED_FACE('',(#46924),#46965,.F.); +#46924 = FACE_BOUND('',#46925,.F.); +#46925 = EDGE_LOOP('',(#46926,#46934,#46935,#46943,#46951,#46959)); +#46926 = ORIENTED_EDGE('',*,*,#46927,.T.); +#46927 = EDGE_CURVE('',#46928,#44815,#46930,.T.); +#46928 = VERTEX_POINT('',#46929); +#46929 = CARTESIAN_POINT('',(0.1,-2.3,-2.1)); +#46930 = LINE('',#46931,#46932); +#46931 = CARTESIAN_POINT('',(0.1,-2.3,-2.1)); +#46932 = VECTOR('',#46933,1.); +#46933 = DIRECTION('',(0.,0.,1.)); +#46934 = ORIENTED_EDGE('',*,*,#44814,.F.); +#46935 = ORIENTED_EDGE('',*,*,#46936,.T.); +#46936 = EDGE_CURVE('',#44807,#46937,#46939,.T.); +#46937 = VERTEX_POINT('',#46938); +#46938 = CARTESIAN_POINT('',(0.1,-1.7,-2.1)); +#46939 = LINE('',#46940,#46941); +#46940 = CARTESIAN_POINT('',(0.1,-1.7,0.2)); +#46941 = VECTOR('',#46942,1.); +#46942 = DIRECTION('',(0.,0.,-1.)); +#46943 = ORIENTED_EDGE('',*,*,#46944,.T.); +#46944 = EDGE_CURVE('',#46937,#46945,#46947,.T.); +#46945 = VERTEX_POINT('',#46946); +#46946 = CARTESIAN_POINT('',(0.1,-1.85,-2.7)); +#46947 = LINE('',#46948,#46949); +#46948 = CARTESIAN_POINT('',(0.1,-1.7,-2.1)); +#46949 = VECTOR('',#46950,1.); +#46950 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46951 = ORIENTED_EDGE('',*,*,#46952,.T.); +#46952 = EDGE_CURVE('',#46945,#46953,#46955,.T.); +#46953 = VERTEX_POINT('',#46954); +#46954 = CARTESIAN_POINT('',(0.1,-2.15,-2.7)); +#46955 = LINE('',#46956,#46957); +#46956 = CARTESIAN_POINT('',(0.1,-1.85,-2.7)); +#46957 = VECTOR('',#46958,1.); +#46958 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46959 = ORIENTED_EDGE('',*,*,#46960,.T.); +#46960 = EDGE_CURVE('',#46953,#46928,#46961,.T.); +#46961 = LINE('',#46962,#46963); +#46962 = CARTESIAN_POINT('',(0.1,-2.15,-2.7)); +#46963 = VECTOR('',#46964,1.); +#46964 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46965 = PLANE('',#46966); +#46966 = AXIS2_PLACEMENT_3D('',#46967,#46968,#46969); +#46967 = CARTESIAN_POINT('',(0.1,-2.,2.448597401424)); +#46968 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46969 = DIRECTION('',(0.,0.,1.)); +#46970 = ADVANCED_FACE('',(#46971),#46982,.T.); +#46971 = FACE_BOUND('',#46972,.T.); +#46972 = EDGE_LOOP('',(#46973,#46979,#46980,#46981)); +#46973 = ORIENTED_EDGE('',*,*,#46974,.F.); +#46974 = EDGE_CURVE('',#44783,#44807,#46975,.T.); +#46975 = LINE('',#46976,#46977); +#46976 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#46977 = VECTOR('',#46978,1.); +#46978 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46979 = ORIENTED_EDGE('',*,*,#44790,.T.); +#46980 = ORIENTED_EDGE('',*,*,#44798,.T.); +#46981 = ORIENTED_EDGE('',*,*,#44806,.T.); +#46982 = PLANE('',#46983); +#46983 = AXIS2_PLACEMENT_3D('',#46984,#46985,#46986); +#46984 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#46985 = DIRECTION('',(0.,-0.,-1.)); +#46986 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46987 = ADVANCED_FACE('',(#46988),#47029,.T.); +#46988 = FACE_BOUND('',#46989,.T.); +#46989 = EDGE_LOOP('',(#46990,#46998,#46999,#47007,#47015,#47023)); +#46990 = ORIENTED_EDGE('',*,*,#46991,.T.); +#46991 = EDGE_CURVE('',#46992,#44775,#46994,.T.); +#46992 = VERTEX_POINT('',#46993); +#46993 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#46994 = LINE('',#46995,#46996); +#46995 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#46996 = VECTOR('',#46997,1.); +#46997 = DIRECTION('',(0.,0.,1.)); +#46998 = ORIENTED_EDGE('',*,*,#44782,.F.); +#46999 = ORIENTED_EDGE('',*,*,#47000,.T.); +#47000 = EDGE_CURVE('',#44783,#47001,#47003,.T.); +#47001 = VERTEX_POINT('',#47002); +#47002 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#47003 = LINE('',#47004,#47005); +#47004 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#47005 = VECTOR('',#47006,1.); +#47006 = DIRECTION('',(0.,0.,-1.)); +#47007 = ORIENTED_EDGE('',*,*,#47008,.T.); +#47008 = EDGE_CURVE('',#47001,#47009,#47011,.T.); +#47009 = VERTEX_POINT('',#47010); +#47010 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#47011 = LINE('',#47012,#47013); +#47012 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#47013 = VECTOR('',#47014,1.); +#47014 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#47015 = ORIENTED_EDGE('',*,*,#47016,.F.); +#47016 = EDGE_CURVE('',#47017,#47009,#47019,.T.); +#47017 = VERTEX_POINT('',#47018); +#47018 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#47019 = LINE('',#47020,#47021); +#47020 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#47021 = VECTOR('',#47022,1.); +#47022 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47023 = ORIENTED_EDGE('',*,*,#47024,.T.); +#47024 = EDGE_CURVE('',#47017,#46992,#47025,.T.); +#47025 = LINE('',#47026,#47027); +#47026 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#47027 = VECTOR('',#47028,1.); +#47028 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#47029 = PLANE('',#47030); +#47030 = AXIS2_PLACEMENT_3D('',#47031,#47032,#47033); +#47031 = CARTESIAN_POINT('',(-0.1,-2.,2.448597401424)); +#47032 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47033 = DIRECTION('',(0.,0.,1.)); +#47034 = ADVANCED_FACE('',(#47035),#47046,.T.); +#47035 = FACE_BOUND('',#47036,.T.); +#47036 = EDGE_LOOP('',(#47037,#47038,#47039,#47045)); +#47037 = ORIENTED_EDGE('',*,*,#44830,.F.); +#47038 = ORIENTED_EDGE('',*,*,#44840,.T.); +#47039 = ORIENTED_EDGE('',*,*,#47040,.T.); +#47040 = EDGE_CURVE('',#44841,#44881,#47041,.T.); +#47041 = LINE('',#47042,#47043); +#47042 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#47043 = VECTOR('',#47044,1.); +#47044 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47045 = ORIENTED_EDGE('',*,*,#44888,.T.); +#47046 = PLANE('',#47047); +#47047 = AXIS2_PLACEMENT_3D('',#47048,#47049,#47050); +#47048 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#47049 = DIRECTION('',(0.,-0.,-1.)); +#47050 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47051 = ADVANCED_FACE('',(#47052),#47093,.F.); +#47052 = FACE_BOUND('',#47053,.F.); +#47053 = EDGE_LOOP('',(#47054,#47062,#47063,#47071,#47079,#47087)); +#47054 = ORIENTED_EDGE('',*,*,#47055,.T.); +#47055 = EDGE_CURVE('',#47056,#44881,#47058,.T.); +#47056 = VERTEX_POINT('',#47057); +#47057 = CARTESIAN_POINT('',(0.1,-0.3,-2.1)); +#47058 = LINE('',#47059,#47060); +#47059 = CARTESIAN_POINT('',(0.1,-0.3,-2.1)); +#47060 = VECTOR('',#47061,1.); +#47061 = DIRECTION('',(0.,0.,1.)); +#47062 = ORIENTED_EDGE('',*,*,#44880,.F.); +#47063 = ORIENTED_EDGE('',*,*,#47064,.T.); +#47064 = EDGE_CURVE('',#44873,#47065,#47067,.T.); +#47065 = VERTEX_POINT('',#47066); +#47066 = CARTESIAN_POINT('',(0.1,0.3,-2.1)); +#47067 = LINE('',#47068,#47069); +#47068 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#47069 = VECTOR('',#47070,1.); +#47070 = DIRECTION('',(0.,0.,-1.)); +#47071 = ORIENTED_EDGE('',*,*,#47072,.T.); +#47072 = EDGE_CURVE('',#47065,#47073,#47075,.T.); +#47073 = VERTEX_POINT('',#47074); +#47074 = CARTESIAN_POINT('',(0.1,0.15,-2.7)); +#47075 = LINE('',#47076,#47077); +#47076 = CARTESIAN_POINT('',(0.1,0.3,-2.1)); +#47077 = VECTOR('',#47078,1.); +#47078 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#47079 = ORIENTED_EDGE('',*,*,#47080,.T.); +#47080 = EDGE_CURVE('',#47073,#47081,#47083,.T.); +#47081 = VERTEX_POINT('',#47082); +#47082 = CARTESIAN_POINT('',(0.1,-0.15,-2.7)); +#47083 = LINE('',#47084,#47085); +#47084 = CARTESIAN_POINT('',(0.1,0.15,-2.7)); +#47085 = VECTOR('',#47086,1.); +#47086 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47087 = ORIENTED_EDGE('',*,*,#47088,.T.); +#47088 = EDGE_CURVE('',#47081,#47056,#47089,.T.); +#47089 = LINE('',#47090,#47091); +#47090 = CARTESIAN_POINT('',(0.1,-0.15,-2.7)); +#47091 = VECTOR('',#47092,1.); +#47092 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#47093 = PLANE('',#47094); +#47094 = AXIS2_PLACEMENT_3D('',#47095,#47096,#47097); +#47095 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,2.448597401424)); +#47096 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47097 = DIRECTION('',(0.,0.,1.)); +#47098 = ADVANCED_FACE('',(#47099),#47110,.T.); +#47099 = FACE_BOUND('',#47100,.T.); +#47100 = EDGE_LOOP('',(#47101,#47107,#47108,#47109)); +#47101 = ORIENTED_EDGE('',*,*,#47102,.F.); +#47102 = EDGE_CURVE('',#44849,#44873,#47103,.T.); +#47103 = LINE('',#47104,#47105); +#47104 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#47105 = VECTOR('',#47106,1.); +#47106 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47107 = ORIENTED_EDGE('',*,*,#44856,.T.); +#47108 = ORIENTED_EDGE('',*,*,#44864,.T.); +#47109 = ORIENTED_EDGE('',*,*,#44872,.T.); +#47110 = PLANE('',#47111); +#47111 = AXIS2_PLACEMENT_3D('',#47112,#47113,#47114); +#47112 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#47113 = DIRECTION('',(0.,-0.,-1.)); +#47114 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47115 = ADVANCED_FACE('',(#47116),#47157,.T.); +#47116 = FACE_BOUND('',#47117,.T.); +#47117 = EDGE_LOOP('',(#47118,#47126,#47127,#47135,#47143,#47151)); +#47118 = ORIENTED_EDGE('',*,*,#47119,.T.); +#47119 = EDGE_CURVE('',#47120,#44841,#47122,.T.); +#47120 = VERTEX_POINT('',#47121); +#47121 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#47122 = LINE('',#47123,#47124); +#47123 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#47124 = VECTOR('',#47125,1.); +#47125 = DIRECTION('',(0.,0.,1.)); +#47126 = ORIENTED_EDGE('',*,*,#44848,.F.); +#47127 = ORIENTED_EDGE('',*,*,#47128,.T.); +#47128 = EDGE_CURVE('',#44849,#47129,#47131,.T.); +#47129 = VERTEX_POINT('',#47130); +#47130 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#47131 = LINE('',#47132,#47133); +#47132 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#47133 = VECTOR('',#47134,1.); +#47134 = DIRECTION('',(0.,0.,-1.)); +#47135 = ORIENTED_EDGE('',*,*,#47136,.T.); +#47136 = EDGE_CURVE('',#47129,#47137,#47139,.T.); +#47137 = VERTEX_POINT('',#47138); +#47138 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#47139 = LINE('',#47140,#47141); +#47140 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#47141 = VECTOR('',#47142,1.); +#47142 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#47143 = ORIENTED_EDGE('',*,*,#47144,.F.); +#47144 = EDGE_CURVE('',#47145,#47137,#47147,.T.); +#47145 = VERTEX_POINT('',#47146); +#47146 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#47147 = LINE('',#47148,#47149); +#47148 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#47149 = VECTOR('',#47150,1.); +#47150 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47151 = ORIENTED_EDGE('',*,*,#47152,.T.); +#47152 = EDGE_CURVE('',#47145,#47120,#47153,.T.); +#47153 = LINE('',#47154,#47155); +#47154 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#47155 = VECTOR('',#47156,1.); +#47156 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#47157 = PLANE('',#47158); +#47158 = AXIS2_PLACEMENT_3D('',#47159,#47160,#47161); +#47159 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,2.448597401424)); +#47160 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47161 = DIRECTION('',(0.,0.,1.)); +#47162 = ADVANCED_FACE('',(#47163),#47188,.F.); +#47163 = FACE_BOUND('',#47164,.F.); +#47164 = EDGE_LOOP('',(#47165,#47173,#47181,#47187)); +#47165 = ORIENTED_EDGE('',*,*,#47166,.T.); +#47166 = EDGE_CURVE('',#44927,#47167,#47169,.T.); +#47167 = VERTEX_POINT('',#47168); +#47168 = CARTESIAN_POINT('',(0.3,-18.3,0.9)); +#47169 = LINE('',#47170,#47171); +#47170 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#47171 = VECTOR('',#47172,1.); +#47172 = DIRECTION('',(0.,-0.,-1.)); +#47173 = ORIENTED_EDGE('',*,*,#47174,.T.); +#47174 = EDGE_CURVE('',#47167,#47175,#47177,.T.); +#47175 = VERTEX_POINT('',#47176); +#47176 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#47177 = LINE('',#47178,#47179); +#47178 = CARTESIAN_POINT('',(0.3,-18.3,0.9)); +#47179 = VECTOR('',#47180,1.); +#47180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47181 = ORIENTED_EDGE('',*,*,#47182,.F.); +#47182 = EDGE_CURVE('',#44936,#47175,#47183,.T.); +#47183 = LINE('',#47184,#47185); +#47184 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#47185 = VECTOR('',#47186,1.); +#47186 = DIRECTION('',(0.,-0.,-1.)); +#47187 = ORIENTED_EDGE('',*,*,#44943,.F.); +#47188 = PLANE('',#47189); +#47189 = AXIS2_PLACEMENT_3D('',#47190,#47191,#47192); +#47190 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#47191 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47192 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47193 = ADVANCED_FACE('',(#47194),#47244,.F.); +#47194 = FACE_BOUND('',#47195,.F.); +#47195 = EDGE_LOOP('',(#47196,#47197,#47198,#47206,#47214,#47222,#47230, + #47238)); +#47196 = ORIENTED_EDGE('',*,*,#44967,.F.); +#47197 = ORIENTED_EDGE('',*,*,#47182,.T.); +#47198 = ORIENTED_EDGE('',*,*,#47199,.T.); +#47199 = EDGE_CURVE('',#47175,#47200,#47202,.T.); +#47200 = VERTEX_POINT('',#47201); +#47201 = CARTESIAN_POINT('',(0.1,-17.7,0.9)); +#47202 = LINE('',#47203,#47204); +#47203 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#47204 = VECTOR('',#47205,1.); +#47205 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47206 = ORIENTED_EDGE('',*,*,#47207,.T.); +#47207 = EDGE_CURVE('',#47200,#47208,#47210,.T.); +#47208 = VERTEX_POINT('',#47209); +#47209 = CARTESIAN_POINT('',(0.1,-17.7,4.5)); +#47210 = LINE('',#47211,#47212); +#47211 = CARTESIAN_POINT('',(0.1,-17.7,3.874298700712)); +#47212 = VECTOR('',#47213,1.); +#47213 = DIRECTION('',(0.,-0.,1.)); +#47214 = ORIENTED_EDGE('',*,*,#47215,.F.); +#47215 = EDGE_CURVE('',#47216,#47208,#47218,.T.); +#47216 = VERTEX_POINT('',#47217); +#47217 = CARTESIAN_POINT('',(-0.1,-17.7,4.5)); +#47218 = LINE('',#47219,#47220); +#47219 = CARTESIAN_POINT('',(-0.1,-17.7,4.5)); +#47220 = VECTOR('',#47221,1.); +#47221 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47222 = ORIENTED_EDGE('',*,*,#47223,.F.); +#47223 = EDGE_CURVE('',#47224,#47216,#47226,.T.); +#47224 = VERTEX_POINT('',#47225); +#47225 = CARTESIAN_POINT('',(-0.1,-17.7,0.9)); +#47226 = LINE('',#47227,#47228); +#47227 = CARTESIAN_POINT('',(-0.1,-17.7,3.874298700712)); +#47228 = VECTOR('',#47229,1.); +#47229 = DIRECTION('',(0.,-0.,1.)); +#47230 = ORIENTED_EDGE('',*,*,#47231,.T.); +#47231 = EDGE_CURVE('',#47224,#47232,#47234,.T.); +#47232 = VERTEX_POINT('',#47233); +#47233 = CARTESIAN_POINT('',(-0.3,-17.7,0.9)); +#47234 = LINE('',#47235,#47236); +#47235 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#47236 = VECTOR('',#47237,1.); +#47237 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47238 = ORIENTED_EDGE('',*,*,#47239,.F.); +#47239 = EDGE_CURVE('',#44960,#47232,#47240,.T.); +#47240 = LINE('',#47241,#47242); +#47241 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#47242 = VECTOR('',#47243,1.); +#47243 = DIRECTION('',(0.,-0.,-1.)); +#47244 = PLANE('',#47245); +#47245 = AXIS2_PLACEMENT_3D('',#47246,#47247,#47248); +#47246 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#47247 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47248 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47249 = ADVANCED_FACE('',(#47250),#47268,.F.); +#47250 = FACE_BOUND('',#47251,.F.); +#47251 = EDGE_LOOP('',(#47252,#47253,#47261,#47267)); +#47252 = ORIENTED_EDGE('',*,*,#47239,.T.); +#47253 = ORIENTED_EDGE('',*,*,#47254,.T.); +#47254 = EDGE_CURVE('',#47232,#47255,#47257,.T.); +#47255 = VERTEX_POINT('',#47256); +#47256 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#47257 = LINE('',#47258,#47259); +#47258 = CARTESIAN_POINT('',(-0.3,-17.7,0.9)); +#47259 = VECTOR('',#47260,1.); +#47260 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47261 = ORIENTED_EDGE('',*,*,#47262,.F.); +#47262 = EDGE_CURVE('',#44984,#47255,#47263,.T.); +#47263 = LINE('',#47264,#47265); +#47264 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#47265 = VECTOR('',#47266,1.); +#47266 = DIRECTION('',(0.,-0.,-1.)); +#47267 = ORIENTED_EDGE('',*,*,#44991,.F.); +#47268 = PLANE('',#47269); +#47269 = AXIS2_PLACEMENT_3D('',#47270,#47271,#47272); +#47270 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#47271 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47272 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47273 = ADVANCED_FACE('',(#47274),#47317,.F.); +#47274 = FACE_BOUND('',#47275,.F.); +#47275 = EDGE_LOOP('',(#47276,#47277,#47278,#47286,#47294,#47302,#47310, + #47316)); +#47276 = ORIENTED_EDGE('',*,*,#45008,.F.); +#47277 = ORIENTED_EDGE('',*,*,#47262,.T.); +#47278 = ORIENTED_EDGE('',*,*,#47279,.T.); +#47279 = EDGE_CURVE('',#47255,#47280,#47282,.T.); +#47280 = VERTEX_POINT('',#47281); +#47281 = CARTESIAN_POINT('',(-0.1,-18.3,0.9)); +#47282 = LINE('',#47283,#47284); +#47283 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#47284 = VECTOR('',#47285,1.); +#47285 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47286 = ORIENTED_EDGE('',*,*,#47287,.F.); +#47287 = EDGE_CURVE('',#47288,#47280,#47290,.T.); +#47288 = VERTEX_POINT('',#47289); +#47289 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#47290 = LINE('',#47291,#47292); +#47291 = CARTESIAN_POINT('',(-0.1,-18.3,3.874298700712)); +#47292 = VECTOR('',#47293,1.); +#47293 = DIRECTION('',(-0.,0.,-1.)); +#47294 = ORIENTED_EDGE('',*,*,#47295,.T.); +#47295 = EDGE_CURVE('',#47288,#47296,#47298,.T.); +#47296 = VERTEX_POINT('',#47297); +#47297 = CARTESIAN_POINT('',(0.1,-18.3,4.5)); +#47298 = LINE('',#47299,#47300); +#47299 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#47300 = VECTOR('',#47301,1.); +#47301 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47302 = ORIENTED_EDGE('',*,*,#47303,.T.); +#47303 = EDGE_CURVE('',#47296,#47304,#47306,.T.); +#47304 = VERTEX_POINT('',#47305); +#47305 = CARTESIAN_POINT('',(0.1,-18.3,0.9)); +#47306 = LINE('',#47307,#47308); +#47307 = CARTESIAN_POINT('',(0.1,-18.3,3.874298700712)); +#47308 = VECTOR('',#47309,1.); +#47309 = DIRECTION('',(-0.,0.,-1.)); +#47310 = ORIENTED_EDGE('',*,*,#47311,.T.); +#47311 = EDGE_CURVE('',#47304,#47167,#47312,.T.); +#47312 = LINE('',#47313,#47314); +#47313 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#47314 = VECTOR('',#47315,1.); +#47315 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47316 = ORIENTED_EDGE('',*,*,#47166,.F.); +#47317 = PLANE('',#47318); +#47318 = AXIS2_PLACEMENT_3D('',#47319,#47320,#47321); +#47319 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#47320 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47321 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47322 = ADVANCED_FACE('',(#47323),#47348,.F.); +#47323 = FACE_BOUND('',#47324,.F.); +#47324 = EDGE_LOOP('',(#47325,#47333,#47341,#47347)); +#47325 = ORIENTED_EDGE('',*,*,#47326,.T.); +#47326 = EDGE_CURVE('',#45023,#47327,#47329,.T.); +#47327 = VERTEX_POINT('',#47328); +#47328 = CARTESIAN_POINT('',(0.3,-16.3,0.9)); +#47329 = LINE('',#47330,#47331); +#47330 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#47331 = VECTOR('',#47332,1.); +#47332 = DIRECTION('',(0.,-0.,-1.)); +#47333 = ORIENTED_EDGE('',*,*,#47334,.T.); +#47334 = EDGE_CURVE('',#47327,#47335,#47337,.T.); +#47335 = VERTEX_POINT('',#47336); +#47336 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#47337 = LINE('',#47338,#47339); +#47338 = CARTESIAN_POINT('',(0.3,-16.3,0.9)); +#47339 = VECTOR('',#47340,1.); +#47340 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47341 = ORIENTED_EDGE('',*,*,#47342,.F.); +#47342 = EDGE_CURVE('',#45032,#47335,#47343,.T.); +#47343 = LINE('',#47344,#47345); +#47344 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#47345 = VECTOR('',#47346,1.); +#47346 = DIRECTION('',(0.,-0.,-1.)); +#47347 = ORIENTED_EDGE('',*,*,#45039,.F.); +#47348 = PLANE('',#47349); +#47349 = AXIS2_PLACEMENT_3D('',#47350,#47351,#47352); +#47350 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#47351 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47352 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47353 = ADVANCED_FACE('',(#47354),#47404,.F.); +#47354 = FACE_BOUND('',#47355,.F.); +#47355 = EDGE_LOOP('',(#47356,#47357,#47358,#47366,#47374,#47382,#47390, + #47398)); +#47356 = ORIENTED_EDGE('',*,*,#45063,.F.); +#47357 = ORIENTED_EDGE('',*,*,#47342,.T.); +#47358 = ORIENTED_EDGE('',*,*,#47359,.T.); +#47359 = EDGE_CURVE('',#47335,#47360,#47362,.T.); +#47360 = VERTEX_POINT('',#47361); +#47361 = CARTESIAN_POINT('',(0.1,-15.7,0.9)); +#47362 = LINE('',#47363,#47364); +#47363 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#47364 = VECTOR('',#47365,1.); +#47365 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47366 = ORIENTED_EDGE('',*,*,#47367,.T.); +#47367 = EDGE_CURVE('',#47360,#47368,#47370,.T.); +#47368 = VERTEX_POINT('',#47369); +#47369 = CARTESIAN_POINT('',(0.1,-15.7,4.5)); +#47370 = LINE('',#47371,#47372); +#47371 = CARTESIAN_POINT('',(0.1,-15.7,3.874298700712)); +#47372 = VECTOR('',#47373,1.); +#47373 = DIRECTION('',(0.,-0.,1.)); +#47374 = ORIENTED_EDGE('',*,*,#47375,.F.); +#47375 = EDGE_CURVE('',#47376,#47368,#47378,.T.); +#47376 = VERTEX_POINT('',#47377); +#47377 = CARTESIAN_POINT('',(-0.1,-15.7,4.5)); +#47378 = LINE('',#47379,#47380); +#47379 = CARTESIAN_POINT('',(-0.1,-15.7,4.5)); +#47380 = VECTOR('',#47381,1.); +#47381 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47382 = ORIENTED_EDGE('',*,*,#47383,.F.); +#47383 = EDGE_CURVE('',#47384,#47376,#47386,.T.); +#47384 = VERTEX_POINT('',#47385); +#47385 = CARTESIAN_POINT('',(-0.1,-15.7,0.9)); +#47386 = LINE('',#47387,#47388); +#47387 = CARTESIAN_POINT('',(-0.1,-15.7,3.874298700712)); +#47388 = VECTOR('',#47389,1.); +#47389 = DIRECTION('',(0.,-0.,1.)); +#47390 = ORIENTED_EDGE('',*,*,#47391,.T.); +#47391 = EDGE_CURVE('',#47384,#47392,#47394,.T.); +#47392 = VERTEX_POINT('',#47393); +#47393 = CARTESIAN_POINT('',(-0.3,-15.7,0.9)); +#47394 = LINE('',#47395,#47396); +#47395 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#47396 = VECTOR('',#47397,1.); +#47397 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47398 = ORIENTED_EDGE('',*,*,#47399,.F.); +#47399 = EDGE_CURVE('',#45056,#47392,#47400,.T.); +#47400 = LINE('',#47401,#47402); +#47401 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#47402 = VECTOR('',#47403,1.); +#47403 = DIRECTION('',(0.,-0.,-1.)); +#47404 = PLANE('',#47405); +#47405 = AXIS2_PLACEMENT_3D('',#47406,#47407,#47408); +#47406 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#47407 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47408 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47409 = ADVANCED_FACE('',(#47410),#47428,.F.); +#47410 = FACE_BOUND('',#47411,.F.); +#47411 = EDGE_LOOP('',(#47412,#47413,#47421,#47427)); +#47412 = ORIENTED_EDGE('',*,*,#47399,.T.); +#47413 = ORIENTED_EDGE('',*,*,#47414,.T.); +#47414 = EDGE_CURVE('',#47392,#47415,#47417,.T.); +#47415 = VERTEX_POINT('',#47416); +#47416 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#47417 = LINE('',#47418,#47419); +#47418 = CARTESIAN_POINT('',(-0.3,-15.7,0.9)); +#47419 = VECTOR('',#47420,1.); +#47420 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47421 = ORIENTED_EDGE('',*,*,#47422,.F.); +#47422 = EDGE_CURVE('',#45080,#47415,#47423,.T.); +#47423 = LINE('',#47424,#47425); +#47424 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#47425 = VECTOR('',#47426,1.); +#47426 = DIRECTION('',(0.,-0.,-1.)); +#47427 = ORIENTED_EDGE('',*,*,#45087,.F.); +#47428 = PLANE('',#47429); +#47429 = AXIS2_PLACEMENT_3D('',#47430,#47431,#47432); +#47430 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#47431 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47432 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47433 = ADVANCED_FACE('',(#47434),#47477,.F.); +#47434 = FACE_BOUND('',#47435,.F.); +#47435 = EDGE_LOOP('',(#47436,#47437,#47438,#47446,#47454,#47462,#47470, + #47476)); +#47436 = ORIENTED_EDGE('',*,*,#45104,.F.); +#47437 = ORIENTED_EDGE('',*,*,#47422,.T.); +#47438 = ORIENTED_EDGE('',*,*,#47439,.T.); +#47439 = EDGE_CURVE('',#47415,#47440,#47442,.T.); +#47440 = VERTEX_POINT('',#47441); +#47441 = CARTESIAN_POINT('',(-0.1,-16.3,0.9)); +#47442 = LINE('',#47443,#47444); +#47443 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#47444 = VECTOR('',#47445,1.); +#47445 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47446 = ORIENTED_EDGE('',*,*,#47447,.F.); +#47447 = EDGE_CURVE('',#47448,#47440,#47450,.T.); +#47448 = VERTEX_POINT('',#47449); +#47449 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#47450 = LINE('',#47451,#47452); +#47451 = CARTESIAN_POINT('',(-0.1,-16.3,3.874298700712)); +#47452 = VECTOR('',#47453,1.); +#47453 = DIRECTION('',(-0.,0.,-1.)); +#47454 = ORIENTED_EDGE('',*,*,#47455,.T.); +#47455 = EDGE_CURVE('',#47448,#47456,#47458,.T.); +#47456 = VERTEX_POINT('',#47457); +#47457 = CARTESIAN_POINT('',(0.1,-16.3,4.5)); +#47458 = LINE('',#47459,#47460); +#47459 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#47460 = VECTOR('',#47461,1.); +#47461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47462 = ORIENTED_EDGE('',*,*,#47463,.T.); +#47463 = EDGE_CURVE('',#47456,#47464,#47466,.T.); +#47464 = VERTEX_POINT('',#47465); +#47465 = CARTESIAN_POINT('',(0.1,-16.3,0.9)); +#47466 = LINE('',#47467,#47468); +#47467 = CARTESIAN_POINT('',(0.1,-16.3,3.874298700712)); +#47468 = VECTOR('',#47469,1.); +#47469 = DIRECTION('',(-0.,0.,-1.)); +#47470 = ORIENTED_EDGE('',*,*,#47471,.T.); +#47471 = EDGE_CURVE('',#47464,#47327,#47472,.T.); +#47472 = LINE('',#47473,#47474); +#47473 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#47474 = VECTOR('',#47475,1.); +#47475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47476 = ORIENTED_EDGE('',*,*,#47326,.F.); +#47477 = PLANE('',#47478); +#47478 = AXIS2_PLACEMENT_3D('',#47479,#47480,#47481); +#47479 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#47480 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47481 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47482 = ADVANCED_FACE('',(#47483),#47508,.F.); +#47483 = FACE_BOUND('',#47484,.F.); +#47484 = EDGE_LOOP('',(#47485,#47493,#47501,#47507)); +#47485 = ORIENTED_EDGE('',*,*,#47486,.T.); +#47486 = EDGE_CURVE('',#45119,#47487,#47489,.T.); +#47487 = VERTEX_POINT('',#47488); +#47488 = CARTESIAN_POINT('',(0.3,-14.3,0.9)); +#47489 = LINE('',#47490,#47491); +#47490 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#47491 = VECTOR('',#47492,1.); +#47492 = DIRECTION('',(0.,-0.,-1.)); +#47493 = ORIENTED_EDGE('',*,*,#47494,.T.); +#47494 = EDGE_CURVE('',#47487,#47495,#47497,.T.); +#47495 = VERTEX_POINT('',#47496); +#47496 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#47497 = LINE('',#47498,#47499); +#47498 = CARTESIAN_POINT('',(0.3,-14.3,0.9)); +#47499 = VECTOR('',#47500,1.); +#47500 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47501 = ORIENTED_EDGE('',*,*,#47502,.F.); +#47502 = EDGE_CURVE('',#45128,#47495,#47503,.T.); +#47503 = LINE('',#47504,#47505); +#47504 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#47505 = VECTOR('',#47506,1.); +#47506 = DIRECTION('',(0.,-0.,-1.)); +#47507 = ORIENTED_EDGE('',*,*,#45135,.F.); +#47508 = PLANE('',#47509); +#47509 = AXIS2_PLACEMENT_3D('',#47510,#47511,#47512); +#47510 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#47511 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47512 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47513 = ADVANCED_FACE('',(#47514),#47564,.F.); +#47514 = FACE_BOUND('',#47515,.F.); +#47515 = EDGE_LOOP('',(#47516,#47517,#47518,#47526,#47534,#47542,#47550, + #47558)); +#47516 = ORIENTED_EDGE('',*,*,#45159,.F.); +#47517 = ORIENTED_EDGE('',*,*,#47502,.T.); +#47518 = ORIENTED_EDGE('',*,*,#47519,.T.); +#47519 = EDGE_CURVE('',#47495,#47520,#47522,.T.); +#47520 = VERTEX_POINT('',#47521); +#47521 = CARTESIAN_POINT('',(0.1,-13.7,0.9)); +#47522 = LINE('',#47523,#47524); +#47523 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#47524 = VECTOR('',#47525,1.); +#47525 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47526 = ORIENTED_EDGE('',*,*,#47527,.T.); +#47527 = EDGE_CURVE('',#47520,#47528,#47530,.T.); +#47528 = VERTEX_POINT('',#47529); +#47529 = CARTESIAN_POINT('',(0.1,-13.7,4.5)); +#47530 = LINE('',#47531,#47532); +#47531 = CARTESIAN_POINT('',(0.1,-13.7,3.874298700712)); +#47532 = VECTOR('',#47533,1.); +#47533 = DIRECTION('',(0.,-0.,1.)); +#47534 = ORIENTED_EDGE('',*,*,#47535,.F.); +#47535 = EDGE_CURVE('',#47536,#47528,#47538,.T.); +#47536 = VERTEX_POINT('',#47537); +#47537 = CARTESIAN_POINT('',(-0.1,-13.7,4.5)); +#47538 = LINE('',#47539,#47540); +#47539 = CARTESIAN_POINT('',(-0.1,-13.7,4.5)); +#47540 = VECTOR('',#47541,1.); +#47541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47542 = ORIENTED_EDGE('',*,*,#47543,.F.); +#47543 = EDGE_CURVE('',#47544,#47536,#47546,.T.); +#47544 = VERTEX_POINT('',#47545); +#47545 = CARTESIAN_POINT('',(-0.1,-13.7,0.9)); +#47546 = LINE('',#47547,#47548); +#47547 = CARTESIAN_POINT('',(-0.1,-13.7,3.874298700712)); +#47548 = VECTOR('',#47549,1.); +#47549 = DIRECTION('',(0.,-0.,1.)); +#47550 = ORIENTED_EDGE('',*,*,#47551,.T.); +#47551 = EDGE_CURVE('',#47544,#47552,#47554,.T.); +#47552 = VERTEX_POINT('',#47553); +#47553 = CARTESIAN_POINT('',(-0.3,-13.7,0.9)); +#47554 = LINE('',#47555,#47556); +#47555 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#47556 = VECTOR('',#47557,1.); +#47557 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47558 = ORIENTED_EDGE('',*,*,#47559,.F.); +#47559 = EDGE_CURVE('',#45152,#47552,#47560,.T.); +#47560 = LINE('',#47561,#47562); +#47561 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#47562 = VECTOR('',#47563,1.); +#47563 = DIRECTION('',(0.,-0.,-1.)); +#47564 = PLANE('',#47565); +#47565 = AXIS2_PLACEMENT_3D('',#47566,#47567,#47568); +#47566 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#47567 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47568 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47569 = ADVANCED_FACE('',(#47570),#47588,.F.); +#47570 = FACE_BOUND('',#47571,.F.); +#47571 = EDGE_LOOP('',(#47572,#47573,#47581,#47587)); +#47572 = ORIENTED_EDGE('',*,*,#47559,.T.); +#47573 = ORIENTED_EDGE('',*,*,#47574,.T.); +#47574 = EDGE_CURVE('',#47552,#47575,#47577,.T.); +#47575 = VERTEX_POINT('',#47576); +#47576 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#47577 = LINE('',#47578,#47579); +#47578 = CARTESIAN_POINT('',(-0.3,-13.7,0.9)); +#47579 = VECTOR('',#47580,1.); +#47580 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47581 = ORIENTED_EDGE('',*,*,#47582,.F.); +#47582 = EDGE_CURVE('',#45176,#47575,#47583,.T.); +#47583 = LINE('',#47584,#47585); +#47584 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#47585 = VECTOR('',#47586,1.); +#47586 = DIRECTION('',(0.,-0.,-1.)); +#47587 = ORIENTED_EDGE('',*,*,#45183,.F.); +#47588 = PLANE('',#47589); +#47589 = AXIS2_PLACEMENT_3D('',#47590,#47591,#47592); +#47590 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#47591 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47592 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47593 = ADVANCED_FACE('',(#47594),#47637,.F.); +#47594 = FACE_BOUND('',#47595,.F.); +#47595 = EDGE_LOOP('',(#47596,#47597,#47598,#47606,#47614,#47622,#47630, + #47636)); +#47596 = ORIENTED_EDGE('',*,*,#45200,.F.); +#47597 = ORIENTED_EDGE('',*,*,#47582,.T.); +#47598 = ORIENTED_EDGE('',*,*,#47599,.T.); +#47599 = EDGE_CURVE('',#47575,#47600,#47602,.T.); +#47600 = VERTEX_POINT('',#47601); +#47601 = CARTESIAN_POINT('',(-0.1,-14.3,0.9)); +#47602 = LINE('',#47603,#47604); +#47603 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#47604 = VECTOR('',#47605,1.); +#47605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47606 = ORIENTED_EDGE('',*,*,#47607,.F.); +#47607 = EDGE_CURVE('',#47608,#47600,#47610,.T.); +#47608 = VERTEX_POINT('',#47609); +#47609 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#47610 = LINE('',#47611,#47612); +#47611 = CARTESIAN_POINT('',(-0.1,-14.3,3.874298700712)); +#47612 = VECTOR('',#47613,1.); +#47613 = DIRECTION('',(-0.,0.,-1.)); +#47614 = ORIENTED_EDGE('',*,*,#47615,.T.); +#47615 = EDGE_CURVE('',#47608,#47616,#47618,.T.); +#47616 = VERTEX_POINT('',#47617); +#47617 = CARTESIAN_POINT('',(0.1,-14.3,4.5)); +#47618 = LINE('',#47619,#47620); +#47619 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#47620 = VECTOR('',#47621,1.); +#47621 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47622 = ORIENTED_EDGE('',*,*,#47623,.T.); +#47623 = EDGE_CURVE('',#47616,#47624,#47626,.T.); +#47624 = VERTEX_POINT('',#47625); +#47625 = CARTESIAN_POINT('',(0.1,-14.3,0.9)); +#47626 = LINE('',#47627,#47628); +#47627 = CARTESIAN_POINT('',(0.1,-14.3,3.874298700712)); +#47628 = VECTOR('',#47629,1.); +#47629 = DIRECTION('',(-0.,0.,-1.)); +#47630 = ORIENTED_EDGE('',*,*,#47631,.T.); +#47631 = EDGE_CURVE('',#47624,#47487,#47632,.T.); +#47632 = LINE('',#47633,#47634); +#47633 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#47634 = VECTOR('',#47635,1.); +#47635 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47636 = ORIENTED_EDGE('',*,*,#47486,.F.); +#47637 = PLANE('',#47638); +#47638 = AXIS2_PLACEMENT_3D('',#47639,#47640,#47641); +#47639 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#47640 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47642 = ADVANCED_FACE('',(#47643),#47668,.F.); +#47643 = FACE_BOUND('',#47644,.F.); +#47644 = EDGE_LOOP('',(#47645,#47653,#47661,#47667)); +#47645 = ORIENTED_EDGE('',*,*,#47646,.T.); +#47646 = EDGE_CURVE('',#45215,#47647,#47649,.T.); +#47647 = VERTEX_POINT('',#47648); +#47648 = CARTESIAN_POINT('',(0.3,-12.3,0.9)); +#47649 = LINE('',#47650,#47651); +#47650 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#47651 = VECTOR('',#47652,1.); +#47652 = DIRECTION('',(0.,-0.,-1.)); +#47653 = ORIENTED_EDGE('',*,*,#47654,.T.); +#47654 = EDGE_CURVE('',#47647,#47655,#47657,.T.); +#47655 = VERTEX_POINT('',#47656); +#47656 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#47657 = LINE('',#47658,#47659); +#47658 = CARTESIAN_POINT('',(0.3,-12.3,0.9)); +#47659 = VECTOR('',#47660,1.); +#47660 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47661 = ORIENTED_EDGE('',*,*,#47662,.F.); +#47662 = EDGE_CURVE('',#45224,#47655,#47663,.T.); +#47663 = LINE('',#47664,#47665); +#47664 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#47665 = VECTOR('',#47666,1.); +#47666 = DIRECTION('',(0.,-0.,-1.)); +#47667 = ORIENTED_EDGE('',*,*,#45231,.F.); +#47668 = PLANE('',#47669); +#47669 = AXIS2_PLACEMENT_3D('',#47670,#47671,#47672); +#47670 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#47671 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47672 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47673 = ADVANCED_FACE('',(#47674),#47724,.F.); +#47674 = FACE_BOUND('',#47675,.F.); +#47675 = EDGE_LOOP('',(#47676,#47677,#47678,#47686,#47694,#47702,#47710, + #47718)); +#47676 = ORIENTED_EDGE('',*,*,#45255,.F.); +#47677 = ORIENTED_EDGE('',*,*,#47662,.T.); +#47678 = ORIENTED_EDGE('',*,*,#47679,.T.); +#47679 = EDGE_CURVE('',#47655,#47680,#47682,.T.); +#47680 = VERTEX_POINT('',#47681); +#47681 = CARTESIAN_POINT('',(0.1,-11.7,0.9)); +#47682 = LINE('',#47683,#47684); +#47683 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#47684 = VECTOR('',#47685,1.); +#47685 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47686 = ORIENTED_EDGE('',*,*,#47687,.T.); +#47687 = EDGE_CURVE('',#47680,#47688,#47690,.T.); +#47688 = VERTEX_POINT('',#47689); +#47689 = CARTESIAN_POINT('',(0.1,-11.7,4.5)); +#47690 = LINE('',#47691,#47692); +#47691 = CARTESIAN_POINT('',(0.1,-11.7,3.874298700712)); +#47692 = VECTOR('',#47693,1.); +#47693 = DIRECTION('',(0.,-0.,1.)); +#47694 = ORIENTED_EDGE('',*,*,#47695,.F.); +#47695 = EDGE_CURVE('',#47696,#47688,#47698,.T.); +#47696 = VERTEX_POINT('',#47697); +#47697 = CARTESIAN_POINT('',(-0.1,-11.7,4.5)); +#47698 = LINE('',#47699,#47700); +#47699 = CARTESIAN_POINT('',(-0.1,-11.7,4.5)); +#47700 = VECTOR('',#47701,1.); +#47701 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47702 = ORIENTED_EDGE('',*,*,#47703,.F.); +#47703 = EDGE_CURVE('',#47704,#47696,#47706,.T.); +#47704 = VERTEX_POINT('',#47705); +#47705 = CARTESIAN_POINT('',(-0.1,-11.7,0.9)); +#47706 = LINE('',#47707,#47708); +#47707 = CARTESIAN_POINT('',(-0.1,-11.7,3.874298700712)); +#47708 = VECTOR('',#47709,1.); +#47709 = DIRECTION('',(0.,-0.,1.)); +#47710 = ORIENTED_EDGE('',*,*,#47711,.T.); +#47711 = EDGE_CURVE('',#47704,#47712,#47714,.T.); +#47712 = VERTEX_POINT('',#47713); +#47713 = CARTESIAN_POINT('',(-0.3,-11.7,0.9)); +#47714 = LINE('',#47715,#47716); +#47715 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#47716 = VECTOR('',#47717,1.); +#47717 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47718 = ORIENTED_EDGE('',*,*,#47719,.F.); +#47719 = EDGE_CURVE('',#45248,#47712,#47720,.T.); +#47720 = LINE('',#47721,#47722); +#47721 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#47722 = VECTOR('',#47723,1.); +#47723 = DIRECTION('',(0.,-0.,-1.)); +#47724 = PLANE('',#47725); +#47725 = AXIS2_PLACEMENT_3D('',#47726,#47727,#47728); +#47726 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#47727 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47728 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47729 = ADVANCED_FACE('',(#47730),#47748,.F.); +#47730 = FACE_BOUND('',#47731,.F.); +#47731 = EDGE_LOOP('',(#47732,#47733,#47741,#47747)); +#47732 = ORIENTED_EDGE('',*,*,#47719,.T.); +#47733 = ORIENTED_EDGE('',*,*,#47734,.T.); +#47734 = EDGE_CURVE('',#47712,#47735,#47737,.T.); +#47735 = VERTEX_POINT('',#47736); +#47736 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#47737 = LINE('',#47738,#47739); +#47738 = CARTESIAN_POINT('',(-0.3,-11.7,0.9)); +#47739 = VECTOR('',#47740,1.); +#47740 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47741 = ORIENTED_EDGE('',*,*,#47742,.F.); +#47742 = EDGE_CURVE('',#45272,#47735,#47743,.T.); +#47743 = LINE('',#47744,#47745); +#47744 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#47745 = VECTOR('',#47746,1.); +#47746 = DIRECTION('',(0.,-0.,-1.)); +#47747 = ORIENTED_EDGE('',*,*,#45279,.F.); +#47748 = PLANE('',#47749); +#47749 = AXIS2_PLACEMENT_3D('',#47750,#47751,#47752); +#47750 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#47751 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47752 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47753 = ADVANCED_FACE('',(#47754),#47797,.F.); +#47754 = FACE_BOUND('',#47755,.F.); +#47755 = EDGE_LOOP('',(#47756,#47757,#47758,#47766,#47774,#47782,#47790, + #47796)); +#47756 = ORIENTED_EDGE('',*,*,#45296,.F.); +#47757 = ORIENTED_EDGE('',*,*,#47742,.T.); +#47758 = ORIENTED_EDGE('',*,*,#47759,.T.); +#47759 = EDGE_CURVE('',#47735,#47760,#47762,.T.); +#47760 = VERTEX_POINT('',#47761); +#47761 = CARTESIAN_POINT('',(-0.1,-12.3,0.9)); +#47762 = LINE('',#47763,#47764); +#47763 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#47764 = VECTOR('',#47765,1.); +#47765 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47766 = ORIENTED_EDGE('',*,*,#47767,.F.); +#47767 = EDGE_CURVE('',#47768,#47760,#47770,.T.); +#47768 = VERTEX_POINT('',#47769); +#47769 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#47770 = LINE('',#47771,#47772); +#47771 = CARTESIAN_POINT('',(-0.1,-12.3,3.874298700712)); +#47772 = VECTOR('',#47773,1.); +#47773 = DIRECTION('',(-0.,0.,-1.)); +#47774 = ORIENTED_EDGE('',*,*,#47775,.T.); +#47775 = EDGE_CURVE('',#47768,#47776,#47778,.T.); +#47776 = VERTEX_POINT('',#47777); +#47777 = CARTESIAN_POINT('',(0.1,-12.3,4.5)); +#47778 = LINE('',#47779,#47780); +#47779 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#47780 = VECTOR('',#47781,1.); +#47781 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47782 = ORIENTED_EDGE('',*,*,#47783,.T.); +#47783 = EDGE_CURVE('',#47776,#47784,#47786,.T.); +#47784 = VERTEX_POINT('',#47785); +#47785 = CARTESIAN_POINT('',(0.1,-12.3,0.9)); +#47786 = LINE('',#47787,#47788); +#47787 = CARTESIAN_POINT('',(0.1,-12.3,3.874298700712)); +#47788 = VECTOR('',#47789,1.); +#47789 = DIRECTION('',(-0.,0.,-1.)); +#47790 = ORIENTED_EDGE('',*,*,#47791,.T.); +#47791 = EDGE_CURVE('',#47784,#47647,#47792,.T.); +#47792 = LINE('',#47793,#47794); +#47793 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#47794 = VECTOR('',#47795,1.); +#47795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47796 = ORIENTED_EDGE('',*,*,#47646,.F.); +#47797 = PLANE('',#47798); +#47798 = AXIS2_PLACEMENT_3D('',#47799,#47800,#47801); +#47799 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#47800 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47801 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47802 = ADVANCED_FACE('',(#47803),#47828,.F.); +#47803 = FACE_BOUND('',#47804,.F.); +#47804 = EDGE_LOOP('',(#47805,#47813,#47821,#47827)); +#47805 = ORIENTED_EDGE('',*,*,#47806,.T.); +#47806 = EDGE_CURVE('',#45311,#47807,#47809,.T.); +#47807 = VERTEX_POINT('',#47808); +#47808 = CARTESIAN_POINT('',(0.3,-10.3,0.9)); +#47809 = LINE('',#47810,#47811); +#47810 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#47811 = VECTOR('',#47812,1.); +#47812 = DIRECTION('',(0.,-0.,-1.)); +#47813 = ORIENTED_EDGE('',*,*,#47814,.T.); +#47814 = EDGE_CURVE('',#47807,#47815,#47817,.T.); +#47815 = VERTEX_POINT('',#47816); +#47816 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#47817 = LINE('',#47818,#47819); +#47818 = CARTESIAN_POINT('',(0.3,-10.3,0.9)); +#47819 = VECTOR('',#47820,1.); +#47820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47821 = ORIENTED_EDGE('',*,*,#47822,.F.); +#47822 = EDGE_CURVE('',#45320,#47815,#47823,.T.); +#47823 = LINE('',#47824,#47825); +#47824 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#47825 = VECTOR('',#47826,1.); +#47826 = DIRECTION('',(0.,-0.,-1.)); +#47827 = ORIENTED_EDGE('',*,*,#45327,.F.); +#47828 = PLANE('',#47829); +#47829 = AXIS2_PLACEMENT_3D('',#47830,#47831,#47832); +#47830 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#47831 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47832 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47833 = ADVANCED_FACE('',(#47834),#47884,.F.); +#47834 = FACE_BOUND('',#47835,.F.); +#47835 = EDGE_LOOP('',(#47836,#47837,#47838,#47846,#47854,#47862,#47870, + #47878)); +#47836 = ORIENTED_EDGE('',*,*,#45351,.F.); +#47837 = ORIENTED_EDGE('',*,*,#47822,.T.); +#47838 = ORIENTED_EDGE('',*,*,#47839,.T.); +#47839 = EDGE_CURVE('',#47815,#47840,#47842,.T.); +#47840 = VERTEX_POINT('',#47841); +#47841 = CARTESIAN_POINT('',(0.1,-9.7,0.9)); +#47842 = LINE('',#47843,#47844); +#47843 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#47844 = VECTOR('',#47845,1.); +#47845 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47846 = ORIENTED_EDGE('',*,*,#47847,.T.); +#47847 = EDGE_CURVE('',#47840,#47848,#47850,.T.); +#47848 = VERTEX_POINT('',#47849); +#47849 = CARTESIAN_POINT('',(0.1,-9.7,4.5)); +#47850 = LINE('',#47851,#47852); +#47851 = CARTESIAN_POINT('',(0.1,-9.7,3.874298700712)); +#47852 = VECTOR('',#47853,1.); +#47853 = DIRECTION('',(0.,-0.,1.)); +#47854 = ORIENTED_EDGE('',*,*,#47855,.F.); +#47855 = EDGE_CURVE('',#47856,#47848,#47858,.T.); +#47856 = VERTEX_POINT('',#47857); +#47857 = CARTESIAN_POINT('',(-0.1,-9.7,4.5)); +#47858 = LINE('',#47859,#47860); +#47859 = CARTESIAN_POINT('',(-0.1,-9.7,4.5)); +#47860 = VECTOR('',#47861,1.); +#47861 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47862 = ORIENTED_EDGE('',*,*,#47863,.F.); +#47863 = EDGE_CURVE('',#47864,#47856,#47866,.T.); +#47864 = VERTEX_POINT('',#47865); +#47865 = CARTESIAN_POINT('',(-0.1,-9.7,0.9)); +#47866 = LINE('',#47867,#47868); +#47867 = CARTESIAN_POINT('',(-0.1,-9.7,3.874298700712)); +#47868 = VECTOR('',#47869,1.); +#47869 = DIRECTION('',(0.,-0.,1.)); +#47870 = ORIENTED_EDGE('',*,*,#47871,.T.); +#47871 = EDGE_CURVE('',#47864,#47872,#47874,.T.); +#47872 = VERTEX_POINT('',#47873); +#47873 = CARTESIAN_POINT('',(-0.3,-9.7,0.9)); +#47874 = LINE('',#47875,#47876); +#47875 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#47876 = VECTOR('',#47877,1.); +#47877 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47878 = ORIENTED_EDGE('',*,*,#47879,.F.); +#47879 = EDGE_CURVE('',#45344,#47872,#47880,.T.); +#47880 = LINE('',#47881,#47882); +#47881 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#47882 = VECTOR('',#47883,1.); +#47883 = DIRECTION('',(0.,-0.,-1.)); +#47884 = PLANE('',#47885); +#47885 = AXIS2_PLACEMENT_3D('',#47886,#47887,#47888); +#47886 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#47887 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47888 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47889 = ADVANCED_FACE('',(#47890),#47908,.F.); +#47890 = FACE_BOUND('',#47891,.F.); +#47891 = EDGE_LOOP('',(#47892,#47893,#47901,#47907)); +#47892 = ORIENTED_EDGE('',*,*,#47879,.T.); +#47893 = ORIENTED_EDGE('',*,*,#47894,.T.); +#47894 = EDGE_CURVE('',#47872,#47895,#47897,.T.); +#47895 = VERTEX_POINT('',#47896); +#47896 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#47897 = LINE('',#47898,#47899); +#47898 = CARTESIAN_POINT('',(-0.3,-9.7,0.9)); +#47899 = VECTOR('',#47900,1.); +#47900 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47901 = ORIENTED_EDGE('',*,*,#47902,.F.); +#47902 = EDGE_CURVE('',#45368,#47895,#47903,.T.); +#47903 = LINE('',#47904,#47905); +#47904 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#47905 = VECTOR('',#47906,1.); +#47906 = DIRECTION('',(0.,-0.,-1.)); +#47907 = ORIENTED_EDGE('',*,*,#45375,.F.); +#47908 = PLANE('',#47909); +#47909 = AXIS2_PLACEMENT_3D('',#47910,#47911,#47912); +#47910 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#47911 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47912 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47913 = ADVANCED_FACE('',(#47914),#47957,.F.); +#47914 = FACE_BOUND('',#47915,.F.); +#47915 = EDGE_LOOP('',(#47916,#47917,#47918,#47926,#47934,#47942,#47950, + #47956)); +#47916 = ORIENTED_EDGE('',*,*,#45392,.F.); +#47917 = ORIENTED_EDGE('',*,*,#47902,.T.); +#47918 = ORIENTED_EDGE('',*,*,#47919,.T.); +#47919 = EDGE_CURVE('',#47895,#47920,#47922,.T.); +#47920 = VERTEX_POINT('',#47921); +#47921 = CARTESIAN_POINT('',(-0.1,-10.3,0.9)); +#47922 = LINE('',#47923,#47924); +#47923 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#47924 = VECTOR('',#47925,1.); +#47925 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47926 = ORIENTED_EDGE('',*,*,#47927,.F.); +#47927 = EDGE_CURVE('',#47928,#47920,#47930,.T.); +#47928 = VERTEX_POINT('',#47929); +#47929 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#47930 = LINE('',#47931,#47932); +#47931 = CARTESIAN_POINT('',(-0.1,-10.3,3.874298700712)); +#47932 = VECTOR('',#47933,1.); +#47933 = DIRECTION('',(-0.,0.,-1.)); +#47934 = ORIENTED_EDGE('',*,*,#47935,.T.); +#47935 = EDGE_CURVE('',#47928,#47936,#47938,.T.); +#47936 = VERTEX_POINT('',#47937); +#47937 = CARTESIAN_POINT('',(0.1,-10.3,4.5)); +#47938 = LINE('',#47939,#47940); +#47939 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#47940 = VECTOR('',#47941,1.); +#47941 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47942 = ORIENTED_EDGE('',*,*,#47943,.T.); +#47943 = EDGE_CURVE('',#47936,#47944,#47946,.T.); +#47944 = VERTEX_POINT('',#47945); +#47945 = CARTESIAN_POINT('',(0.1,-10.3,0.9)); +#47946 = LINE('',#47947,#47948); +#47947 = CARTESIAN_POINT('',(0.1,-10.3,3.874298700712)); +#47948 = VECTOR('',#47949,1.); +#47949 = DIRECTION('',(-0.,0.,-1.)); +#47950 = ORIENTED_EDGE('',*,*,#47951,.T.); +#47951 = EDGE_CURVE('',#47944,#47807,#47952,.T.); +#47952 = LINE('',#47953,#47954); +#47953 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#47954 = VECTOR('',#47955,1.); +#47955 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47956 = ORIENTED_EDGE('',*,*,#47806,.F.); +#47957 = PLANE('',#47958); +#47958 = AXIS2_PLACEMENT_3D('',#47959,#47960,#47961); +#47959 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#47960 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47961 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47962 = ADVANCED_FACE('',(#47963),#47988,.F.); +#47963 = FACE_BOUND('',#47964,.F.); +#47964 = EDGE_LOOP('',(#47965,#47973,#47981,#47987)); +#47965 = ORIENTED_EDGE('',*,*,#47966,.T.); +#47966 = EDGE_CURVE('',#45407,#47967,#47969,.T.); +#47967 = VERTEX_POINT('',#47968); +#47968 = CARTESIAN_POINT('',(0.3,-8.3,0.9)); +#47969 = LINE('',#47970,#47971); +#47970 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#47971 = VECTOR('',#47972,1.); +#47972 = DIRECTION('',(0.,-0.,-1.)); +#47973 = ORIENTED_EDGE('',*,*,#47974,.T.); +#47974 = EDGE_CURVE('',#47967,#47975,#47977,.T.); +#47975 = VERTEX_POINT('',#47976); +#47976 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#47977 = LINE('',#47978,#47979); +#47978 = CARTESIAN_POINT('',(0.3,-8.3,0.9)); +#47979 = VECTOR('',#47980,1.); +#47980 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47981 = ORIENTED_EDGE('',*,*,#47982,.F.); +#47982 = EDGE_CURVE('',#45416,#47975,#47983,.T.); +#47983 = LINE('',#47984,#47985); +#47984 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#47985 = VECTOR('',#47986,1.); +#47986 = DIRECTION('',(0.,-0.,-1.)); +#47987 = ORIENTED_EDGE('',*,*,#45423,.F.); +#47988 = PLANE('',#47989); +#47989 = AXIS2_PLACEMENT_3D('',#47990,#47991,#47992); +#47990 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#47991 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47992 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47993 = ADVANCED_FACE('',(#47994),#48044,.F.); +#47994 = FACE_BOUND('',#47995,.F.); +#47995 = EDGE_LOOP('',(#47996,#47997,#47998,#48006,#48014,#48022,#48030, + #48038)); +#47996 = ORIENTED_EDGE('',*,*,#45447,.F.); +#47997 = ORIENTED_EDGE('',*,*,#47982,.T.); +#47998 = ORIENTED_EDGE('',*,*,#47999,.T.); +#47999 = EDGE_CURVE('',#47975,#48000,#48002,.T.); +#48000 = VERTEX_POINT('',#48001); +#48001 = CARTESIAN_POINT('',(0.1,-7.7,0.9)); +#48002 = LINE('',#48003,#48004); +#48003 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#48004 = VECTOR('',#48005,1.); +#48005 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48006 = ORIENTED_EDGE('',*,*,#48007,.T.); +#48007 = EDGE_CURVE('',#48000,#48008,#48010,.T.); +#48008 = VERTEX_POINT('',#48009); +#48009 = CARTESIAN_POINT('',(0.1,-7.7,4.5)); +#48010 = LINE('',#48011,#48012); +#48011 = CARTESIAN_POINT('',(0.1,-7.7,3.874298700712)); +#48012 = VECTOR('',#48013,1.); +#48013 = DIRECTION('',(0.,-0.,1.)); +#48014 = ORIENTED_EDGE('',*,*,#48015,.F.); +#48015 = EDGE_CURVE('',#48016,#48008,#48018,.T.); +#48016 = VERTEX_POINT('',#48017); +#48017 = CARTESIAN_POINT('',(-0.1,-7.7,4.5)); +#48018 = LINE('',#48019,#48020); +#48019 = CARTESIAN_POINT('',(-0.1,-7.7,4.5)); +#48020 = VECTOR('',#48021,1.); +#48021 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48022 = ORIENTED_EDGE('',*,*,#48023,.F.); +#48023 = EDGE_CURVE('',#48024,#48016,#48026,.T.); +#48024 = VERTEX_POINT('',#48025); +#48025 = CARTESIAN_POINT('',(-0.1,-7.7,0.9)); +#48026 = LINE('',#48027,#48028); +#48027 = CARTESIAN_POINT('',(-0.1,-7.7,3.874298700712)); +#48028 = VECTOR('',#48029,1.); +#48029 = DIRECTION('',(0.,-0.,1.)); +#48030 = ORIENTED_EDGE('',*,*,#48031,.T.); +#48031 = EDGE_CURVE('',#48024,#48032,#48034,.T.); +#48032 = VERTEX_POINT('',#48033); +#48033 = CARTESIAN_POINT('',(-0.3,-7.7,0.9)); +#48034 = LINE('',#48035,#48036); +#48035 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#48036 = VECTOR('',#48037,1.); +#48037 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48038 = ORIENTED_EDGE('',*,*,#48039,.F.); +#48039 = EDGE_CURVE('',#45440,#48032,#48040,.T.); +#48040 = LINE('',#48041,#48042); +#48041 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#48042 = VECTOR('',#48043,1.); +#48043 = DIRECTION('',(0.,-0.,-1.)); +#48044 = PLANE('',#48045); +#48045 = AXIS2_PLACEMENT_3D('',#48046,#48047,#48048); +#48046 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#48047 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48048 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48049 = ADVANCED_FACE('',(#48050),#48068,.F.); +#48050 = FACE_BOUND('',#48051,.F.); +#48051 = EDGE_LOOP('',(#48052,#48053,#48061,#48067)); +#48052 = ORIENTED_EDGE('',*,*,#48039,.T.); +#48053 = ORIENTED_EDGE('',*,*,#48054,.T.); +#48054 = EDGE_CURVE('',#48032,#48055,#48057,.T.); +#48055 = VERTEX_POINT('',#48056); +#48056 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#48057 = LINE('',#48058,#48059); +#48058 = CARTESIAN_POINT('',(-0.3,-7.7,0.9)); +#48059 = VECTOR('',#48060,1.); +#48060 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48061 = ORIENTED_EDGE('',*,*,#48062,.F.); +#48062 = EDGE_CURVE('',#45464,#48055,#48063,.T.); +#48063 = LINE('',#48064,#48065); +#48064 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#48065 = VECTOR('',#48066,1.); +#48066 = DIRECTION('',(0.,-0.,-1.)); +#48067 = ORIENTED_EDGE('',*,*,#45471,.F.); +#48068 = PLANE('',#48069); +#48069 = AXIS2_PLACEMENT_3D('',#48070,#48071,#48072); +#48070 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#48071 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48072 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48073 = ADVANCED_FACE('',(#48074),#48117,.F.); +#48074 = FACE_BOUND('',#48075,.F.); +#48075 = EDGE_LOOP('',(#48076,#48077,#48078,#48086,#48094,#48102,#48110, + #48116)); +#48076 = ORIENTED_EDGE('',*,*,#45488,.F.); +#48077 = ORIENTED_EDGE('',*,*,#48062,.T.); +#48078 = ORIENTED_EDGE('',*,*,#48079,.T.); +#48079 = EDGE_CURVE('',#48055,#48080,#48082,.T.); +#48080 = VERTEX_POINT('',#48081); +#48081 = CARTESIAN_POINT('',(-0.1,-8.3,0.9)); +#48082 = LINE('',#48083,#48084); +#48083 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#48084 = VECTOR('',#48085,1.); +#48085 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48086 = ORIENTED_EDGE('',*,*,#48087,.F.); +#48087 = EDGE_CURVE('',#48088,#48080,#48090,.T.); +#48088 = VERTEX_POINT('',#48089); +#48089 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#48090 = LINE('',#48091,#48092); +#48091 = CARTESIAN_POINT('',(-0.1,-8.3,3.874298700712)); +#48092 = VECTOR('',#48093,1.); +#48093 = DIRECTION('',(-0.,0.,-1.)); +#48094 = ORIENTED_EDGE('',*,*,#48095,.T.); +#48095 = EDGE_CURVE('',#48088,#48096,#48098,.T.); +#48096 = VERTEX_POINT('',#48097); +#48097 = CARTESIAN_POINT('',(0.1,-8.3,4.5)); +#48098 = LINE('',#48099,#48100); +#48099 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#48100 = VECTOR('',#48101,1.); +#48101 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48102 = ORIENTED_EDGE('',*,*,#48103,.T.); +#48103 = EDGE_CURVE('',#48096,#48104,#48106,.T.); +#48104 = VERTEX_POINT('',#48105); +#48105 = CARTESIAN_POINT('',(0.1,-8.3,0.9)); +#48106 = LINE('',#48107,#48108); +#48107 = CARTESIAN_POINT('',(0.1,-8.3,3.874298700712)); +#48108 = VECTOR('',#48109,1.); +#48109 = DIRECTION('',(-0.,0.,-1.)); +#48110 = ORIENTED_EDGE('',*,*,#48111,.T.); +#48111 = EDGE_CURVE('',#48104,#47967,#48112,.T.); +#48112 = LINE('',#48113,#48114); +#48113 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#48114 = VECTOR('',#48115,1.); +#48115 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48116 = ORIENTED_EDGE('',*,*,#47966,.F.); +#48117 = PLANE('',#48118); +#48118 = AXIS2_PLACEMENT_3D('',#48119,#48120,#48121); +#48119 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#48120 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48121 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48122 = ADVANCED_FACE('',(#48123),#48148,.F.); +#48123 = FACE_BOUND('',#48124,.F.); +#48124 = EDGE_LOOP('',(#48125,#48133,#48141,#48147)); +#48125 = ORIENTED_EDGE('',*,*,#48126,.T.); +#48126 = EDGE_CURVE('',#45503,#48127,#48129,.T.); +#48127 = VERTEX_POINT('',#48128); +#48128 = CARTESIAN_POINT('',(0.3,-6.3,0.9)); +#48129 = LINE('',#48130,#48131); +#48130 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#48131 = VECTOR('',#48132,1.); +#48132 = DIRECTION('',(0.,-0.,-1.)); +#48133 = ORIENTED_EDGE('',*,*,#48134,.T.); +#48134 = EDGE_CURVE('',#48127,#48135,#48137,.T.); +#48135 = VERTEX_POINT('',#48136); +#48136 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#48137 = LINE('',#48138,#48139); +#48138 = CARTESIAN_POINT('',(0.3,-6.3,0.9)); +#48139 = VECTOR('',#48140,1.); +#48140 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48141 = ORIENTED_EDGE('',*,*,#48142,.F.); +#48142 = EDGE_CURVE('',#45512,#48135,#48143,.T.); +#48143 = LINE('',#48144,#48145); +#48144 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#48145 = VECTOR('',#48146,1.); +#48146 = DIRECTION('',(0.,-0.,-1.)); +#48147 = ORIENTED_EDGE('',*,*,#45519,.F.); +#48148 = PLANE('',#48149); +#48149 = AXIS2_PLACEMENT_3D('',#48150,#48151,#48152); +#48150 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#48151 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48152 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48153 = ADVANCED_FACE('',(#48154),#48204,.F.); +#48154 = FACE_BOUND('',#48155,.F.); +#48155 = EDGE_LOOP('',(#48156,#48157,#48158,#48166,#48174,#48182,#48190, + #48198)); +#48156 = ORIENTED_EDGE('',*,*,#45543,.F.); +#48157 = ORIENTED_EDGE('',*,*,#48142,.T.); +#48158 = ORIENTED_EDGE('',*,*,#48159,.T.); +#48159 = EDGE_CURVE('',#48135,#48160,#48162,.T.); +#48160 = VERTEX_POINT('',#48161); +#48161 = CARTESIAN_POINT('',(0.1,-5.7,0.9)); +#48162 = LINE('',#48163,#48164); +#48163 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#48164 = VECTOR('',#48165,1.); +#48165 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48166 = ORIENTED_EDGE('',*,*,#48167,.T.); +#48167 = EDGE_CURVE('',#48160,#48168,#48170,.T.); +#48168 = VERTEX_POINT('',#48169); +#48169 = CARTESIAN_POINT('',(0.1,-5.7,4.5)); +#48170 = LINE('',#48171,#48172); +#48171 = CARTESIAN_POINT('',(0.1,-5.7,3.874298700712)); +#48172 = VECTOR('',#48173,1.); +#48173 = DIRECTION('',(0.,-0.,1.)); +#48174 = ORIENTED_EDGE('',*,*,#48175,.F.); +#48175 = EDGE_CURVE('',#48176,#48168,#48178,.T.); +#48176 = VERTEX_POINT('',#48177); +#48177 = CARTESIAN_POINT('',(-0.1,-5.7,4.5)); +#48178 = LINE('',#48179,#48180); +#48179 = CARTESIAN_POINT('',(-0.1,-5.7,4.5)); +#48180 = VECTOR('',#48181,1.); +#48181 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48182 = ORIENTED_EDGE('',*,*,#48183,.F.); +#48183 = EDGE_CURVE('',#48184,#48176,#48186,.T.); +#48184 = VERTEX_POINT('',#48185); +#48185 = CARTESIAN_POINT('',(-0.1,-5.7,0.9)); +#48186 = LINE('',#48187,#48188); +#48187 = CARTESIAN_POINT('',(-0.1,-5.7,3.874298700712)); +#48188 = VECTOR('',#48189,1.); +#48189 = DIRECTION('',(0.,-0.,1.)); +#48190 = ORIENTED_EDGE('',*,*,#48191,.T.); +#48191 = EDGE_CURVE('',#48184,#48192,#48194,.T.); +#48192 = VERTEX_POINT('',#48193); +#48193 = CARTESIAN_POINT('',(-0.3,-5.7,0.9)); +#48194 = LINE('',#48195,#48196); +#48195 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#48196 = VECTOR('',#48197,1.); +#48197 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48198 = ORIENTED_EDGE('',*,*,#48199,.F.); +#48199 = EDGE_CURVE('',#45536,#48192,#48200,.T.); +#48200 = LINE('',#48201,#48202); +#48201 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#48202 = VECTOR('',#48203,1.); +#48203 = DIRECTION('',(0.,-0.,-1.)); +#48204 = PLANE('',#48205); +#48205 = AXIS2_PLACEMENT_3D('',#48206,#48207,#48208); +#48206 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#48207 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48208 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48209 = ADVANCED_FACE('',(#48210),#48228,.F.); +#48210 = FACE_BOUND('',#48211,.F.); +#48211 = EDGE_LOOP('',(#48212,#48213,#48221,#48227)); +#48212 = ORIENTED_EDGE('',*,*,#48199,.T.); +#48213 = ORIENTED_EDGE('',*,*,#48214,.T.); +#48214 = EDGE_CURVE('',#48192,#48215,#48217,.T.); +#48215 = VERTEX_POINT('',#48216); +#48216 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#48217 = LINE('',#48218,#48219); +#48218 = CARTESIAN_POINT('',(-0.3,-5.7,0.9)); +#48219 = VECTOR('',#48220,1.); +#48220 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48221 = ORIENTED_EDGE('',*,*,#48222,.F.); +#48222 = EDGE_CURVE('',#45560,#48215,#48223,.T.); +#48223 = LINE('',#48224,#48225); +#48224 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#48225 = VECTOR('',#48226,1.); +#48226 = DIRECTION('',(0.,-0.,-1.)); +#48227 = ORIENTED_EDGE('',*,*,#45567,.F.); +#48228 = PLANE('',#48229); +#48229 = AXIS2_PLACEMENT_3D('',#48230,#48231,#48232); +#48230 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#48231 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48232 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48233 = ADVANCED_FACE('',(#48234),#48277,.F.); +#48234 = FACE_BOUND('',#48235,.F.); +#48235 = EDGE_LOOP('',(#48236,#48237,#48238,#48246,#48254,#48262,#48270, + #48276)); +#48236 = ORIENTED_EDGE('',*,*,#45584,.F.); +#48237 = ORIENTED_EDGE('',*,*,#48222,.T.); +#48238 = ORIENTED_EDGE('',*,*,#48239,.T.); +#48239 = EDGE_CURVE('',#48215,#48240,#48242,.T.); +#48240 = VERTEX_POINT('',#48241); +#48241 = CARTESIAN_POINT('',(-0.1,-6.3,0.9)); +#48242 = LINE('',#48243,#48244); +#48243 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#48244 = VECTOR('',#48245,1.); +#48245 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48246 = ORIENTED_EDGE('',*,*,#48247,.F.); +#48247 = EDGE_CURVE('',#48248,#48240,#48250,.T.); +#48248 = VERTEX_POINT('',#48249); +#48249 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#48250 = LINE('',#48251,#48252); +#48251 = CARTESIAN_POINT('',(-0.1,-6.3,3.874298700712)); +#48252 = VECTOR('',#48253,1.); +#48253 = DIRECTION('',(-0.,0.,-1.)); +#48254 = ORIENTED_EDGE('',*,*,#48255,.T.); +#48255 = EDGE_CURVE('',#48248,#48256,#48258,.T.); +#48256 = VERTEX_POINT('',#48257); +#48257 = CARTESIAN_POINT('',(0.1,-6.3,4.5)); +#48258 = LINE('',#48259,#48260); +#48259 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#48260 = VECTOR('',#48261,1.); +#48261 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48262 = ORIENTED_EDGE('',*,*,#48263,.T.); +#48263 = EDGE_CURVE('',#48256,#48264,#48266,.T.); +#48264 = VERTEX_POINT('',#48265); +#48265 = CARTESIAN_POINT('',(0.1,-6.3,0.9)); +#48266 = LINE('',#48267,#48268); +#48267 = CARTESIAN_POINT('',(0.1,-6.3,3.874298700712)); +#48268 = VECTOR('',#48269,1.); +#48269 = DIRECTION('',(-0.,0.,-1.)); +#48270 = ORIENTED_EDGE('',*,*,#48271,.T.); +#48271 = EDGE_CURVE('',#48264,#48127,#48272,.T.); +#48272 = LINE('',#48273,#48274); +#48273 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#48274 = VECTOR('',#48275,1.); +#48275 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48276 = ORIENTED_EDGE('',*,*,#48126,.F.); +#48277 = PLANE('',#48278); +#48278 = AXIS2_PLACEMENT_3D('',#48279,#48280,#48281); +#48279 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#48280 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48281 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48282 = ADVANCED_FACE('',(#48283),#48308,.F.); +#48283 = FACE_BOUND('',#48284,.F.); +#48284 = EDGE_LOOP('',(#48285,#48293,#48301,#48307)); +#48285 = ORIENTED_EDGE('',*,*,#48286,.T.); +#48286 = EDGE_CURVE('',#45599,#48287,#48289,.T.); +#48287 = VERTEX_POINT('',#48288); +#48288 = CARTESIAN_POINT('',(0.3,-4.3,0.9)); +#48289 = LINE('',#48290,#48291); +#48290 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#48291 = VECTOR('',#48292,1.); +#48292 = DIRECTION('',(0.,-0.,-1.)); +#48293 = ORIENTED_EDGE('',*,*,#48294,.T.); +#48294 = EDGE_CURVE('',#48287,#48295,#48297,.T.); +#48295 = VERTEX_POINT('',#48296); +#48296 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#48297 = LINE('',#48298,#48299); +#48298 = CARTESIAN_POINT('',(0.3,-4.3,0.9)); +#48299 = VECTOR('',#48300,1.); +#48300 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48301 = ORIENTED_EDGE('',*,*,#48302,.F.); +#48302 = EDGE_CURVE('',#45608,#48295,#48303,.T.); +#48303 = LINE('',#48304,#48305); +#48304 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#48305 = VECTOR('',#48306,1.); +#48306 = DIRECTION('',(0.,-0.,-1.)); +#48307 = ORIENTED_EDGE('',*,*,#45615,.F.); +#48308 = PLANE('',#48309); +#48309 = AXIS2_PLACEMENT_3D('',#48310,#48311,#48312); +#48310 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#48311 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48312 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48313 = ADVANCED_FACE('',(#48314),#48364,.F.); +#48314 = FACE_BOUND('',#48315,.F.); +#48315 = EDGE_LOOP('',(#48316,#48317,#48318,#48326,#48334,#48342,#48350, + #48358)); +#48316 = ORIENTED_EDGE('',*,*,#45639,.F.); +#48317 = ORIENTED_EDGE('',*,*,#48302,.T.); +#48318 = ORIENTED_EDGE('',*,*,#48319,.T.); +#48319 = EDGE_CURVE('',#48295,#48320,#48322,.T.); +#48320 = VERTEX_POINT('',#48321); +#48321 = CARTESIAN_POINT('',(0.1,-3.7,0.9)); +#48322 = LINE('',#48323,#48324); +#48323 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#48324 = VECTOR('',#48325,1.); +#48325 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48326 = ORIENTED_EDGE('',*,*,#48327,.T.); +#48327 = EDGE_CURVE('',#48320,#48328,#48330,.T.); +#48328 = VERTEX_POINT('',#48329); +#48329 = CARTESIAN_POINT('',(0.1,-3.7,4.5)); +#48330 = LINE('',#48331,#48332); +#48331 = CARTESIAN_POINT('',(0.1,-3.7,3.874298700712)); +#48332 = VECTOR('',#48333,1.); +#48333 = DIRECTION('',(0.,-0.,1.)); +#48334 = ORIENTED_EDGE('',*,*,#48335,.F.); +#48335 = EDGE_CURVE('',#48336,#48328,#48338,.T.); +#48336 = VERTEX_POINT('',#48337); +#48337 = CARTESIAN_POINT('',(-0.1,-3.7,4.5)); +#48338 = LINE('',#48339,#48340); +#48339 = CARTESIAN_POINT('',(-0.1,-3.7,4.5)); +#48340 = VECTOR('',#48341,1.); +#48341 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48342 = ORIENTED_EDGE('',*,*,#48343,.F.); +#48343 = EDGE_CURVE('',#48344,#48336,#48346,.T.); +#48344 = VERTEX_POINT('',#48345); +#48345 = CARTESIAN_POINT('',(-0.1,-3.7,0.9)); +#48346 = LINE('',#48347,#48348); +#48347 = CARTESIAN_POINT('',(-0.1,-3.7,3.874298700712)); +#48348 = VECTOR('',#48349,1.); +#48349 = DIRECTION('',(0.,-0.,1.)); +#48350 = ORIENTED_EDGE('',*,*,#48351,.T.); +#48351 = EDGE_CURVE('',#48344,#48352,#48354,.T.); +#48352 = VERTEX_POINT('',#48353); +#48353 = CARTESIAN_POINT('',(-0.3,-3.7,0.9)); +#48354 = LINE('',#48355,#48356); +#48355 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#48356 = VECTOR('',#48357,1.); +#48357 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48358 = ORIENTED_EDGE('',*,*,#48359,.F.); +#48359 = EDGE_CURVE('',#45632,#48352,#48360,.T.); +#48360 = LINE('',#48361,#48362); +#48361 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#48362 = VECTOR('',#48363,1.); +#48363 = DIRECTION('',(0.,-0.,-1.)); +#48364 = PLANE('',#48365); +#48365 = AXIS2_PLACEMENT_3D('',#48366,#48367,#48368); +#48366 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#48367 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48368 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48369 = ADVANCED_FACE('',(#48370),#48388,.F.); +#48370 = FACE_BOUND('',#48371,.F.); +#48371 = EDGE_LOOP('',(#48372,#48373,#48381,#48387)); +#48372 = ORIENTED_EDGE('',*,*,#48359,.T.); +#48373 = ORIENTED_EDGE('',*,*,#48374,.T.); +#48374 = EDGE_CURVE('',#48352,#48375,#48377,.T.); +#48375 = VERTEX_POINT('',#48376); +#48376 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#48377 = LINE('',#48378,#48379); +#48378 = CARTESIAN_POINT('',(-0.3,-3.7,0.9)); +#48379 = VECTOR('',#48380,1.); +#48380 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48381 = ORIENTED_EDGE('',*,*,#48382,.F.); +#48382 = EDGE_CURVE('',#45656,#48375,#48383,.T.); +#48383 = LINE('',#48384,#48385); +#48384 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#48385 = VECTOR('',#48386,1.); +#48386 = DIRECTION('',(0.,-0.,-1.)); +#48387 = ORIENTED_EDGE('',*,*,#45663,.F.); +#48388 = PLANE('',#48389); +#48389 = AXIS2_PLACEMENT_3D('',#48390,#48391,#48392); +#48390 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#48391 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48392 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48393 = ADVANCED_FACE('',(#48394),#48437,.F.); +#48394 = FACE_BOUND('',#48395,.F.); +#48395 = EDGE_LOOP('',(#48396,#48397,#48398,#48406,#48414,#48422,#48430, + #48436)); +#48396 = ORIENTED_EDGE('',*,*,#45680,.F.); +#48397 = ORIENTED_EDGE('',*,*,#48382,.T.); +#48398 = ORIENTED_EDGE('',*,*,#48399,.T.); +#48399 = EDGE_CURVE('',#48375,#48400,#48402,.T.); +#48400 = VERTEX_POINT('',#48401); +#48401 = CARTESIAN_POINT('',(-0.1,-4.3,0.9)); +#48402 = LINE('',#48403,#48404); +#48403 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#48404 = VECTOR('',#48405,1.); +#48405 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48406 = ORIENTED_EDGE('',*,*,#48407,.F.); +#48407 = EDGE_CURVE('',#48408,#48400,#48410,.T.); +#48408 = VERTEX_POINT('',#48409); +#48409 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#48410 = LINE('',#48411,#48412); +#48411 = CARTESIAN_POINT('',(-0.1,-4.3,3.874298700712)); +#48412 = VECTOR('',#48413,1.); +#48413 = DIRECTION('',(-0.,0.,-1.)); +#48414 = ORIENTED_EDGE('',*,*,#48415,.T.); +#48415 = EDGE_CURVE('',#48408,#48416,#48418,.T.); +#48416 = VERTEX_POINT('',#48417); +#48417 = CARTESIAN_POINT('',(0.1,-4.3,4.5)); +#48418 = LINE('',#48419,#48420); +#48419 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#48420 = VECTOR('',#48421,1.); +#48421 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48422 = ORIENTED_EDGE('',*,*,#48423,.T.); +#48423 = EDGE_CURVE('',#48416,#48424,#48426,.T.); +#48424 = VERTEX_POINT('',#48425); +#48425 = CARTESIAN_POINT('',(0.1,-4.3,0.9)); +#48426 = LINE('',#48427,#48428); +#48427 = CARTESIAN_POINT('',(0.1,-4.3,3.874298700712)); +#48428 = VECTOR('',#48429,1.); +#48429 = DIRECTION('',(-0.,0.,-1.)); +#48430 = ORIENTED_EDGE('',*,*,#48431,.T.); +#48431 = EDGE_CURVE('',#48424,#48287,#48432,.T.); +#48432 = LINE('',#48433,#48434); +#48433 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#48434 = VECTOR('',#48435,1.); +#48435 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48436 = ORIENTED_EDGE('',*,*,#48286,.F.); +#48437 = PLANE('',#48438); +#48438 = AXIS2_PLACEMENT_3D('',#48439,#48440,#48441); +#48439 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#48440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48441 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48442 = ADVANCED_FACE('',(#48443),#48468,.F.); +#48443 = FACE_BOUND('',#48444,.F.); +#48444 = EDGE_LOOP('',(#48445,#48453,#48461,#48467)); +#48445 = ORIENTED_EDGE('',*,*,#48446,.T.); +#48446 = EDGE_CURVE('',#45695,#48447,#48449,.T.); +#48447 = VERTEX_POINT('',#48448); +#48448 = CARTESIAN_POINT('',(0.3,-2.3,0.9)); +#48449 = LINE('',#48450,#48451); +#48450 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#48451 = VECTOR('',#48452,1.); +#48452 = DIRECTION('',(0.,-0.,-1.)); +#48453 = ORIENTED_EDGE('',*,*,#48454,.T.); +#48454 = EDGE_CURVE('',#48447,#48455,#48457,.T.); +#48455 = VERTEX_POINT('',#48456); +#48456 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#48457 = LINE('',#48458,#48459); +#48458 = CARTESIAN_POINT('',(0.3,-2.3,0.9)); +#48459 = VECTOR('',#48460,1.); +#48460 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48461 = ORIENTED_EDGE('',*,*,#48462,.F.); +#48462 = EDGE_CURVE('',#45704,#48455,#48463,.T.); +#48463 = LINE('',#48464,#48465); +#48464 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#48465 = VECTOR('',#48466,1.); +#48466 = DIRECTION('',(0.,-0.,-1.)); +#48467 = ORIENTED_EDGE('',*,*,#45711,.F.); +#48468 = PLANE('',#48469); +#48469 = AXIS2_PLACEMENT_3D('',#48470,#48471,#48472); +#48470 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#48471 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48472 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48473 = ADVANCED_FACE('',(#48474),#48524,.F.); +#48474 = FACE_BOUND('',#48475,.F.); +#48475 = EDGE_LOOP('',(#48476,#48477,#48478,#48486,#48494,#48502,#48510, + #48518)); +#48476 = ORIENTED_EDGE('',*,*,#45735,.F.); +#48477 = ORIENTED_EDGE('',*,*,#48462,.T.); +#48478 = ORIENTED_EDGE('',*,*,#48479,.T.); +#48479 = EDGE_CURVE('',#48455,#48480,#48482,.T.); +#48480 = VERTEX_POINT('',#48481); +#48481 = CARTESIAN_POINT('',(0.1,-1.7,0.9)); +#48482 = LINE('',#48483,#48484); +#48483 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#48484 = VECTOR('',#48485,1.); +#48485 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48486 = ORIENTED_EDGE('',*,*,#48487,.T.); +#48487 = EDGE_CURVE('',#48480,#48488,#48490,.T.); +#48488 = VERTEX_POINT('',#48489); +#48489 = CARTESIAN_POINT('',(0.1,-1.7,4.5)); +#48490 = LINE('',#48491,#48492); +#48491 = CARTESIAN_POINT('',(0.1,-1.7,3.874298700712)); +#48492 = VECTOR('',#48493,1.); +#48493 = DIRECTION('',(0.,-0.,1.)); +#48494 = ORIENTED_EDGE('',*,*,#48495,.F.); +#48495 = EDGE_CURVE('',#48496,#48488,#48498,.T.); +#48496 = VERTEX_POINT('',#48497); +#48497 = CARTESIAN_POINT('',(-0.1,-1.7,4.5)); +#48498 = LINE('',#48499,#48500); +#48499 = CARTESIAN_POINT('',(-0.1,-1.7,4.5)); +#48500 = VECTOR('',#48501,1.); +#48501 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48502 = ORIENTED_EDGE('',*,*,#48503,.F.); +#48503 = EDGE_CURVE('',#48504,#48496,#48506,.T.); +#48504 = VERTEX_POINT('',#48505); +#48505 = CARTESIAN_POINT('',(-0.1,-1.7,0.9)); +#48506 = LINE('',#48507,#48508); +#48507 = CARTESIAN_POINT('',(-0.1,-1.7,3.874298700712)); +#48508 = VECTOR('',#48509,1.); +#48509 = DIRECTION('',(0.,-0.,1.)); +#48510 = ORIENTED_EDGE('',*,*,#48511,.T.); +#48511 = EDGE_CURVE('',#48504,#48512,#48514,.T.); +#48512 = VERTEX_POINT('',#48513); +#48513 = CARTESIAN_POINT('',(-0.3,-1.7,0.9)); +#48514 = LINE('',#48515,#48516); +#48515 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#48516 = VECTOR('',#48517,1.); +#48517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48518 = ORIENTED_EDGE('',*,*,#48519,.F.); +#48519 = EDGE_CURVE('',#45728,#48512,#48520,.T.); +#48520 = LINE('',#48521,#48522); +#48521 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#48522 = VECTOR('',#48523,1.); +#48523 = DIRECTION('',(0.,-0.,-1.)); +#48524 = PLANE('',#48525); +#48525 = AXIS2_PLACEMENT_3D('',#48526,#48527,#48528); +#48526 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#48527 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48528 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48529 = ADVANCED_FACE('',(#48530),#48548,.F.); +#48530 = FACE_BOUND('',#48531,.F.); +#48531 = EDGE_LOOP('',(#48532,#48533,#48541,#48547)); +#48532 = ORIENTED_EDGE('',*,*,#48519,.T.); +#48533 = ORIENTED_EDGE('',*,*,#48534,.T.); +#48534 = EDGE_CURVE('',#48512,#48535,#48537,.T.); +#48535 = VERTEX_POINT('',#48536); +#48536 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#48537 = LINE('',#48538,#48539); +#48538 = CARTESIAN_POINT('',(-0.3,-1.7,0.9)); +#48539 = VECTOR('',#48540,1.); +#48540 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48541 = ORIENTED_EDGE('',*,*,#48542,.F.); +#48542 = EDGE_CURVE('',#45752,#48535,#48543,.T.); +#48543 = LINE('',#48544,#48545); +#48544 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#48545 = VECTOR('',#48546,1.); +#48546 = DIRECTION('',(0.,-0.,-1.)); +#48547 = ORIENTED_EDGE('',*,*,#45759,.F.); +#48548 = PLANE('',#48549); +#48549 = AXIS2_PLACEMENT_3D('',#48550,#48551,#48552); +#48550 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#48551 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48552 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48553 = ADVANCED_FACE('',(#48554),#48597,.F.); +#48554 = FACE_BOUND('',#48555,.F.); +#48555 = EDGE_LOOP('',(#48556,#48557,#48558,#48566,#48574,#48582,#48590, + #48596)); +#48556 = ORIENTED_EDGE('',*,*,#45776,.F.); +#48557 = ORIENTED_EDGE('',*,*,#48542,.T.); +#48558 = ORIENTED_EDGE('',*,*,#48559,.T.); +#48559 = EDGE_CURVE('',#48535,#48560,#48562,.T.); +#48560 = VERTEX_POINT('',#48561); +#48561 = CARTESIAN_POINT('',(-0.1,-2.3,0.9)); +#48562 = LINE('',#48563,#48564); +#48563 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#48564 = VECTOR('',#48565,1.); +#48565 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48566 = ORIENTED_EDGE('',*,*,#48567,.F.); +#48567 = EDGE_CURVE('',#48568,#48560,#48570,.T.); +#48568 = VERTEX_POINT('',#48569); +#48569 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#48570 = LINE('',#48571,#48572); +#48571 = CARTESIAN_POINT('',(-0.1,-2.3,3.874298700712)); +#48572 = VECTOR('',#48573,1.); +#48573 = DIRECTION('',(-0.,0.,-1.)); +#48574 = ORIENTED_EDGE('',*,*,#48575,.T.); +#48575 = EDGE_CURVE('',#48568,#48576,#48578,.T.); +#48576 = VERTEX_POINT('',#48577); +#48577 = CARTESIAN_POINT('',(0.1,-2.3,4.5)); +#48578 = LINE('',#48579,#48580); +#48579 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#48580 = VECTOR('',#48581,1.); +#48581 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48582 = ORIENTED_EDGE('',*,*,#48583,.T.); +#48583 = EDGE_CURVE('',#48576,#48584,#48586,.T.); +#48584 = VERTEX_POINT('',#48585); +#48585 = CARTESIAN_POINT('',(0.1,-2.3,0.9)); +#48586 = LINE('',#48587,#48588); +#48587 = CARTESIAN_POINT('',(0.1,-2.3,3.874298700712)); +#48588 = VECTOR('',#48589,1.); +#48589 = DIRECTION('',(-0.,0.,-1.)); +#48590 = ORIENTED_EDGE('',*,*,#48591,.T.); +#48591 = EDGE_CURVE('',#48584,#48447,#48592,.T.); +#48592 = LINE('',#48593,#48594); +#48593 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#48594 = VECTOR('',#48595,1.); +#48595 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48596 = ORIENTED_EDGE('',*,*,#48446,.F.); +#48597 = PLANE('',#48598); +#48598 = AXIS2_PLACEMENT_3D('',#48599,#48600,#48601); +#48599 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#48600 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48602 = ADVANCED_FACE('',(#48603),#48628,.F.); +#48603 = FACE_BOUND('',#48604,.F.); +#48604 = EDGE_LOOP('',(#48605,#48613,#48621,#48627)); +#48605 = ORIENTED_EDGE('',*,*,#48606,.T.); +#48606 = EDGE_CURVE('',#45791,#48607,#48609,.T.); +#48607 = VERTEX_POINT('',#48608); +#48608 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#48609 = LINE('',#48610,#48611); +#48610 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#48611 = VECTOR('',#48612,1.); +#48612 = DIRECTION('',(0.,-0.,-1.)); +#48613 = ORIENTED_EDGE('',*,*,#48614,.T.); +#48614 = EDGE_CURVE('',#48607,#48615,#48617,.T.); +#48615 = VERTEX_POINT('',#48616); +#48616 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#48617 = LINE('',#48618,#48619); +#48618 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#48619 = VECTOR('',#48620,1.); +#48620 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48621 = ORIENTED_EDGE('',*,*,#48622,.F.); +#48622 = EDGE_CURVE('',#45800,#48615,#48623,.T.); +#48623 = LINE('',#48624,#48625); +#48624 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#48625 = VECTOR('',#48626,1.); +#48626 = DIRECTION('',(0.,-0.,-1.)); +#48627 = ORIENTED_EDGE('',*,*,#45807,.F.); +#48628 = PLANE('',#48629); +#48629 = AXIS2_PLACEMENT_3D('',#48630,#48631,#48632); +#48630 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#48631 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48632 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48633 = ADVANCED_FACE('',(#48634),#48684,.F.); +#48634 = FACE_BOUND('',#48635,.F.); +#48635 = EDGE_LOOP('',(#48636,#48637,#48638,#48646,#48654,#48662,#48670, + #48678)); +#48636 = ORIENTED_EDGE('',*,*,#45831,.F.); +#48637 = ORIENTED_EDGE('',*,*,#48622,.T.); +#48638 = ORIENTED_EDGE('',*,*,#48639,.T.); +#48639 = EDGE_CURVE('',#48615,#48640,#48642,.T.); +#48640 = VERTEX_POINT('',#48641); +#48641 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#48642 = LINE('',#48643,#48644); +#48643 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#48644 = VECTOR('',#48645,1.); +#48645 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48646 = ORIENTED_EDGE('',*,*,#48647,.T.); +#48647 = EDGE_CURVE('',#48640,#48648,#48650,.T.); +#48648 = VERTEX_POINT('',#48649); +#48649 = CARTESIAN_POINT('',(0.1,0.3,4.5)); +#48650 = LINE('',#48651,#48652); +#48651 = CARTESIAN_POINT('',(0.1,0.3,3.874298700712)); +#48652 = VECTOR('',#48653,1.); +#48653 = DIRECTION('',(0.,-0.,1.)); +#48654 = ORIENTED_EDGE('',*,*,#48655,.F.); +#48655 = EDGE_CURVE('',#48656,#48648,#48658,.T.); +#48656 = VERTEX_POINT('',#48657); +#48657 = CARTESIAN_POINT('',(-0.1,0.3,4.5)); +#48658 = LINE('',#48659,#48660); +#48659 = CARTESIAN_POINT('',(-0.1,0.3,4.5)); +#48660 = VECTOR('',#48661,1.); +#48661 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48662 = ORIENTED_EDGE('',*,*,#48663,.F.); +#48663 = EDGE_CURVE('',#48664,#48656,#48666,.T.); +#48664 = VERTEX_POINT('',#48665); +#48665 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#48666 = LINE('',#48667,#48668); +#48667 = CARTESIAN_POINT('',(-0.1,0.3,3.874298700712)); +#48668 = VECTOR('',#48669,1.); +#48669 = DIRECTION('',(0.,-0.,1.)); +#48670 = ORIENTED_EDGE('',*,*,#48671,.T.); +#48671 = EDGE_CURVE('',#48664,#48672,#48674,.T.); +#48672 = VERTEX_POINT('',#48673); +#48673 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#48674 = LINE('',#48675,#48676); +#48675 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#48676 = VECTOR('',#48677,1.); +#48677 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48678 = ORIENTED_EDGE('',*,*,#48679,.F.); +#48679 = EDGE_CURVE('',#45824,#48672,#48680,.T.); +#48680 = LINE('',#48681,#48682); +#48681 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#48682 = VECTOR('',#48683,1.); +#48683 = DIRECTION('',(0.,-0.,-1.)); +#48684 = PLANE('',#48685); +#48685 = AXIS2_PLACEMENT_3D('',#48686,#48687,#48688); +#48686 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#48687 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48688 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48689 = ADVANCED_FACE('',(#48690),#48708,.F.); +#48690 = FACE_BOUND('',#48691,.F.); +#48691 = EDGE_LOOP('',(#48692,#48693,#48701,#48707)); +#48692 = ORIENTED_EDGE('',*,*,#48679,.T.); +#48693 = ORIENTED_EDGE('',*,*,#48694,.T.); +#48694 = EDGE_CURVE('',#48672,#48695,#48697,.T.); +#48695 = VERTEX_POINT('',#48696); +#48696 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#48697 = LINE('',#48698,#48699); +#48698 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#48699 = VECTOR('',#48700,1.); +#48700 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48701 = ORIENTED_EDGE('',*,*,#48702,.F.); +#48702 = EDGE_CURVE('',#45848,#48695,#48703,.T.); +#48703 = LINE('',#48704,#48705); +#48704 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#48705 = VECTOR('',#48706,1.); +#48706 = DIRECTION('',(0.,-0.,-1.)); +#48707 = ORIENTED_EDGE('',*,*,#45855,.F.); +#48708 = PLANE('',#48709); +#48709 = AXIS2_PLACEMENT_3D('',#48710,#48711,#48712); +#48710 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#48711 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48712 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48713 = ADVANCED_FACE('',(#48714),#48757,.F.); +#48714 = FACE_BOUND('',#48715,.F.); +#48715 = EDGE_LOOP('',(#48716,#48717,#48718,#48726,#48734,#48742,#48750, + #48756)); +#48716 = ORIENTED_EDGE('',*,*,#45872,.F.); +#48717 = ORIENTED_EDGE('',*,*,#48702,.T.); +#48718 = ORIENTED_EDGE('',*,*,#48719,.T.); +#48719 = EDGE_CURVE('',#48695,#48720,#48722,.T.); +#48720 = VERTEX_POINT('',#48721); +#48721 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#48722 = LINE('',#48723,#48724); +#48723 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#48724 = VECTOR('',#48725,1.); +#48725 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48726 = ORIENTED_EDGE('',*,*,#48727,.F.); +#48727 = EDGE_CURVE('',#48728,#48720,#48730,.T.); +#48728 = VERTEX_POINT('',#48729); +#48729 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#48730 = LINE('',#48731,#48732); +#48731 = CARTESIAN_POINT('',(-0.1,-0.3,3.874298700712)); +#48732 = VECTOR('',#48733,1.); +#48733 = DIRECTION('',(-0.,0.,-1.)); +#48734 = ORIENTED_EDGE('',*,*,#48735,.T.); +#48735 = EDGE_CURVE('',#48728,#48736,#48738,.T.); +#48736 = VERTEX_POINT('',#48737); +#48737 = CARTESIAN_POINT('',(0.1,-0.3,4.5)); +#48738 = LINE('',#48739,#48740); +#48739 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#48740 = VECTOR('',#48741,1.); +#48741 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48742 = ORIENTED_EDGE('',*,*,#48743,.T.); +#48743 = EDGE_CURVE('',#48736,#48744,#48746,.T.); +#48744 = VERTEX_POINT('',#48745); +#48745 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#48746 = LINE('',#48747,#48748); +#48747 = CARTESIAN_POINT('',(0.1,-0.3,3.874298700712)); +#48748 = VECTOR('',#48749,1.); +#48749 = DIRECTION('',(-0.,0.,-1.)); +#48750 = ORIENTED_EDGE('',*,*,#48751,.T.); +#48751 = EDGE_CURVE('',#48744,#48607,#48752,.T.); +#48752 = LINE('',#48753,#48754); +#48753 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#48754 = VECTOR('',#48755,1.); +#48755 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48756 = ORIENTED_EDGE('',*,*,#48606,.F.); +#48757 = PLANE('',#48758); +#48758 = AXIS2_PLACEMENT_3D('',#48759,#48760,#48761); +#48759 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#48760 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48761 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48762 = ADVANCED_FACE('',(#48763),#48774,.T.); +#48763 = FACE_BOUND('',#48764,.T.); +#48764 = EDGE_LOOP('',(#48765,#48771,#48772,#48773)); +#48765 = ORIENTED_EDGE('',*,*,#48766,.T.); +#48766 = EDGE_CURVE('',#45968,#45904,#48767,.T.); +#48767 = LINE('',#48768,#48769); +#48768 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#48769 = VECTOR('',#48770,1.); +#48770 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48771 = ORIENTED_EDGE('',*,*,#45903,.T.); +#48772 = ORIENTED_EDGE('',*,*,#45888,.F.); +#48773 = ORIENTED_EDGE('',*,*,#45967,.F.); +#48774 = PLANE('',#48775); +#48775 = AXIS2_PLACEMENT_3D('',#48776,#48777,#48778); +#48776 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#48777 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48778 = DIRECTION('',(0.,0.,1.)); +#48779 = ADVANCED_FACE('',(#48780),#48791,.T.); +#48780 = FACE_BOUND('',#48781,.T.); +#48781 = EDGE_LOOP('',(#48782,#48788,#48789,#48790)); +#48782 = ORIENTED_EDGE('',*,*,#48783,.T.); +#48783 = EDGE_CURVE('',#45993,#45929,#48784,.T.); +#48784 = LINE('',#48785,#48786); +#48785 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#48786 = VECTOR('',#48787,1.); +#48787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48788 = ORIENTED_EDGE('',*,*,#45936,.T.); +#48789 = ORIENTED_EDGE('',*,*,#48766,.F.); +#48790 = ORIENTED_EDGE('',*,*,#46000,.F.); +#48791 = PLANE('',#48792); +#48792 = AXIS2_PLACEMENT_3D('',#48793,#48794,#48795); +#48793 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#48794 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#48795 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#48796 = ADVANCED_FACE('',(#48797),#48808,.T.); +#48797 = FACE_BOUND('',#48798,.T.); +#48798 = EDGE_LOOP('',(#48799,#48805,#48806,#48807)); +#48799 = ORIENTED_EDGE('',*,*,#48800,.T.); +#48800 = EDGE_CURVE('',#45985,#45921,#48801,.T.); +#48801 = LINE('',#48802,#48803); +#48802 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#48803 = VECTOR('',#48804,1.); +#48804 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48805 = ORIENTED_EDGE('',*,*,#45928,.T.); +#48806 = ORIENTED_EDGE('',*,*,#48783,.F.); +#48807 = ORIENTED_EDGE('',*,*,#45992,.T.); +#48808 = PLANE('',#48809); +#48809 = AXIS2_PLACEMENT_3D('',#48810,#48811,#48812); +#48810 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#48811 = DIRECTION('',(0.,-0.,-1.)); +#48812 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48813 = ADVANCED_FACE('',(#48814),#48825,.T.); +#48814 = FACE_BOUND('',#48815,.T.); +#48815 = EDGE_LOOP('',(#48816,#48822,#48823,#48824)); +#48816 = ORIENTED_EDGE('',*,*,#48817,.T.); +#48817 = EDGE_CURVE('',#45977,#45913,#48818,.T.); +#48818 = LINE('',#48819,#48820); +#48819 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#48820 = VECTOR('',#48821,1.); +#48821 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48822 = ORIENTED_EDGE('',*,*,#45920,.T.); +#48823 = ORIENTED_EDGE('',*,*,#48800,.F.); +#48824 = ORIENTED_EDGE('',*,*,#45984,.F.); +#48825 = PLANE('',#48826); +#48826 = AXIS2_PLACEMENT_3D('',#48827,#48828,#48829); +#48827 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#48828 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#48829 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#48830 = ADVANCED_FACE('',(#48831),#48837,.T.); +#48831 = FACE_BOUND('',#48832,.T.); +#48832 = EDGE_LOOP('',(#48833,#48834,#48835,#48836)); +#48833 = ORIENTED_EDGE('',*,*,#45950,.T.); +#48834 = ORIENTED_EDGE('',*,*,#45912,.T.); +#48835 = ORIENTED_EDGE('',*,*,#48817,.F.); +#48836 = ORIENTED_EDGE('',*,*,#45976,.F.); +#48837 = PLANE('',#48838); +#48838 = AXIS2_PLACEMENT_3D('',#48839,#48840,#48841); +#48839 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#48840 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48841 = DIRECTION('',(0.,0.,-1.)); +#48842 = ADVANCED_FACE('',(#48843),#48854,.T.); +#48843 = FACE_BOUND('',#48844,.T.); +#48844 = EDGE_LOOP('',(#48845,#48851,#48852,#48853)); +#48845 = ORIENTED_EDGE('',*,*,#48846,.T.); +#48846 = EDGE_CURVE('',#46096,#46032,#48847,.T.); +#48847 = LINE('',#48848,#48849); +#48848 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#48849 = VECTOR('',#48850,1.); +#48850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48851 = ORIENTED_EDGE('',*,*,#46031,.T.); +#48852 = ORIENTED_EDGE('',*,*,#46016,.F.); +#48853 = ORIENTED_EDGE('',*,*,#46095,.F.); +#48854 = PLANE('',#48855); +#48855 = AXIS2_PLACEMENT_3D('',#48856,#48857,#48858); +#48856 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#48857 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48858 = DIRECTION('',(0.,0.,1.)); +#48859 = ADVANCED_FACE('',(#48860),#48871,.T.); +#48860 = FACE_BOUND('',#48861,.T.); +#48861 = EDGE_LOOP('',(#48862,#48868,#48869,#48870)); +#48862 = ORIENTED_EDGE('',*,*,#48863,.T.); +#48863 = EDGE_CURVE('',#46121,#46057,#48864,.T.); +#48864 = LINE('',#48865,#48866); +#48865 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#48866 = VECTOR('',#48867,1.); +#48867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48868 = ORIENTED_EDGE('',*,*,#46064,.T.); +#48869 = ORIENTED_EDGE('',*,*,#48846,.F.); +#48870 = ORIENTED_EDGE('',*,*,#46128,.F.); +#48871 = PLANE('',#48872); +#48872 = AXIS2_PLACEMENT_3D('',#48873,#48874,#48875); +#48873 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#48874 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#48875 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#48876 = ADVANCED_FACE('',(#48877),#48888,.T.); +#48877 = FACE_BOUND('',#48878,.T.); +#48878 = EDGE_LOOP('',(#48879,#48885,#48886,#48887)); +#48879 = ORIENTED_EDGE('',*,*,#48880,.T.); +#48880 = EDGE_CURVE('',#46113,#46049,#48881,.T.); +#48881 = LINE('',#48882,#48883); +#48882 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#48883 = VECTOR('',#48884,1.); +#48884 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48885 = ORIENTED_EDGE('',*,*,#46056,.T.); +#48886 = ORIENTED_EDGE('',*,*,#48863,.F.); +#48887 = ORIENTED_EDGE('',*,*,#46120,.T.); +#48888 = PLANE('',#48889); +#48889 = AXIS2_PLACEMENT_3D('',#48890,#48891,#48892); +#48890 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#48891 = DIRECTION('',(0.,-0.,-1.)); +#48892 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48893 = ADVANCED_FACE('',(#48894),#48905,.T.); +#48894 = FACE_BOUND('',#48895,.T.); +#48895 = EDGE_LOOP('',(#48896,#48902,#48903,#48904)); +#48896 = ORIENTED_EDGE('',*,*,#48897,.T.); +#48897 = EDGE_CURVE('',#46105,#46041,#48898,.T.); +#48898 = LINE('',#48899,#48900); +#48899 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#48900 = VECTOR('',#48901,1.); +#48901 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48902 = ORIENTED_EDGE('',*,*,#46048,.T.); +#48903 = ORIENTED_EDGE('',*,*,#48880,.F.); +#48904 = ORIENTED_EDGE('',*,*,#46112,.F.); +#48905 = PLANE('',#48906); +#48906 = AXIS2_PLACEMENT_3D('',#48907,#48908,#48909); +#48907 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#48908 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#48909 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#48910 = ADVANCED_FACE('',(#48911),#48917,.T.); +#48911 = FACE_BOUND('',#48912,.T.); +#48912 = EDGE_LOOP('',(#48913,#48914,#48915,#48916)); +#48913 = ORIENTED_EDGE('',*,*,#46078,.T.); +#48914 = ORIENTED_EDGE('',*,*,#46040,.T.); +#48915 = ORIENTED_EDGE('',*,*,#48897,.F.); +#48916 = ORIENTED_EDGE('',*,*,#46104,.F.); +#48917 = PLANE('',#48918); +#48918 = AXIS2_PLACEMENT_3D('',#48919,#48920,#48921); +#48919 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#48920 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48921 = DIRECTION('',(0.,0.,-1.)); +#48922 = ADVANCED_FACE('',(#48923),#48934,.T.); +#48923 = FACE_BOUND('',#48924,.T.); +#48924 = EDGE_LOOP('',(#48925,#48931,#48932,#48933)); +#48925 = ORIENTED_EDGE('',*,*,#48926,.T.); +#48926 = EDGE_CURVE('',#46224,#46160,#48927,.T.); +#48927 = LINE('',#48928,#48929); +#48928 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#48929 = VECTOR('',#48930,1.); +#48930 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48931 = ORIENTED_EDGE('',*,*,#46159,.T.); +#48932 = ORIENTED_EDGE('',*,*,#46144,.F.); +#48933 = ORIENTED_EDGE('',*,*,#46223,.F.); +#48934 = PLANE('',#48935); +#48935 = AXIS2_PLACEMENT_3D('',#48936,#48937,#48938); +#48936 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#48937 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48938 = DIRECTION('',(0.,0.,1.)); +#48939 = ADVANCED_FACE('',(#48940),#48951,.T.); +#48940 = FACE_BOUND('',#48941,.T.); +#48941 = EDGE_LOOP('',(#48942,#48948,#48949,#48950)); +#48942 = ORIENTED_EDGE('',*,*,#48943,.T.); +#48943 = EDGE_CURVE('',#46249,#46185,#48944,.T.); +#48944 = LINE('',#48945,#48946); +#48945 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#48946 = VECTOR('',#48947,1.); +#48947 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48948 = ORIENTED_EDGE('',*,*,#46192,.T.); +#48949 = ORIENTED_EDGE('',*,*,#48926,.F.); +#48950 = ORIENTED_EDGE('',*,*,#46256,.F.); +#48951 = PLANE('',#48952); +#48952 = AXIS2_PLACEMENT_3D('',#48953,#48954,#48955); +#48953 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#48954 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#48955 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#48956 = ADVANCED_FACE('',(#48957),#48968,.T.); +#48957 = FACE_BOUND('',#48958,.T.); +#48958 = EDGE_LOOP('',(#48959,#48965,#48966,#48967)); +#48959 = ORIENTED_EDGE('',*,*,#48960,.T.); +#48960 = EDGE_CURVE('',#46241,#46177,#48961,.T.); +#48961 = LINE('',#48962,#48963); +#48962 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#48963 = VECTOR('',#48964,1.); +#48964 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48965 = ORIENTED_EDGE('',*,*,#46184,.T.); +#48966 = ORIENTED_EDGE('',*,*,#48943,.F.); +#48967 = ORIENTED_EDGE('',*,*,#46248,.T.); +#48968 = PLANE('',#48969); +#48969 = AXIS2_PLACEMENT_3D('',#48970,#48971,#48972); +#48970 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#48971 = DIRECTION('',(0.,-0.,-1.)); +#48972 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48973 = ADVANCED_FACE('',(#48974),#48985,.T.); +#48974 = FACE_BOUND('',#48975,.T.); +#48975 = EDGE_LOOP('',(#48976,#48982,#48983,#48984)); +#48976 = ORIENTED_EDGE('',*,*,#48977,.T.); +#48977 = EDGE_CURVE('',#46233,#46169,#48978,.T.); +#48978 = LINE('',#48979,#48980); +#48979 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#48980 = VECTOR('',#48981,1.); +#48981 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48982 = ORIENTED_EDGE('',*,*,#46176,.T.); +#48983 = ORIENTED_EDGE('',*,*,#48960,.F.); +#48984 = ORIENTED_EDGE('',*,*,#46240,.F.); +#48985 = PLANE('',#48986); +#48986 = AXIS2_PLACEMENT_3D('',#48987,#48988,#48989); +#48987 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#48988 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#48989 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#48990 = ADVANCED_FACE('',(#48991),#48997,.T.); +#48991 = FACE_BOUND('',#48992,.T.); +#48992 = EDGE_LOOP('',(#48993,#48994,#48995,#48996)); +#48993 = ORIENTED_EDGE('',*,*,#46206,.T.); +#48994 = ORIENTED_EDGE('',*,*,#46168,.T.); +#48995 = ORIENTED_EDGE('',*,*,#48977,.F.); +#48996 = ORIENTED_EDGE('',*,*,#46232,.F.); +#48997 = PLANE('',#48998); +#48998 = AXIS2_PLACEMENT_3D('',#48999,#49000,#49001); +#48999 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#49000 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49001 = DIRECTION('',(0.,0.,-1.)); +#49002 = ADVANCED_FACE('',(#49003),#49014,.T.); +#49003 = FACE_BOUND('',#49004,.T.); +#49004 = EDGE_LOOP('',(#49005,#49011,#49012,#49013)); +#49005 = ORIENTED_EDGE('',*,*,#49006,.T.); +#49006 = EDGE_CURVE('',#46352,#46288,#49007,.T.); +#49007 = LINE('',#49008,#49009); +#49008 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#49009 = VECTOR('',#49010,1.); +#49010 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49011 = ORIENTED_EDGE('',*,*,#46287,.T.); +#49012 = ORIENTED_EDGE('',*,*,#46272,.F.); +#49013 = ORIENTED_EDGE('',*,*,#46351,.F.); +#49014 = PLANE('',#49015); +#49015 = AXIS2_PLACEMENT_3D('',#49016,#49017,#49018); +#49016 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#49017 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49018 = DIRECTION('',(0.,0.,1.)); +#49019 = ADVANCED_FACE('',(#49020),#49031,.T.); +#49020 = FACE_BOUND('',#49021,.T.); +#49021 = EDGE_LOOP('',(#49022,#49028,#49029,#49030)); +#49022 = ORIENTED_EDGE('',*,*,#49023,.T.); +#49023 = EDGE_CURVE('',#46377,#46313,#49024,.T.); +#49024 = LINE('',#49025,#49026); +#49025 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#49026 = VECTOR('',#49027,1.); +#49027 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49028 = ORIENTED_EDGE('',*,*,#46320,.T.); +#49029 = ORIENTED_EDGE('',*,*,#49006,.F.); +#49030 = ORIENTED_EDGE('',*,*,#46384,.F.); +#49031 = PLANE('',#49032); +#49032 = AXIS2_PLACEMENT_3D('',#49033,#49034,#49035); +#49033 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#49034 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49035 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49036 = ADVANCED_FACE('',(#49037),#49048,.T.); +#49037 = FACE_BOUND('',#49038,.T.); +#49038 = EDGE_LOOP('',(#49039,#49045,#49046,#49047)); +#49039 = ORIENTED_EDGE('',*,*,#49040,.T.); +#49040 = EDGE_CURVE('',#46369,#46305,#49041,.T.); +#49041 = LINE('',#49042,#49043); +#49042 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#49043 = VECTOR('',#49044,1.); +#49044 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49045 = ORIENTED_EDGE('',*,*,#46312,.T.); +#49046 = ORIENTED_EDGE('',*,*,#49023,.F.); +#49047 = ORIENTED_EDGE('',*,*,#46376,.T.); +#49048 = PLANE('',#49049); +#49049 = AXIS2_PLACEMENT_3D('',#49050,#49051,#49052); +#49050 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#49051 = DIRECTION('',(0.,-0.,-1.)); +#49052 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49053 = ADVANCED_FACE('',(#49054),#49065,.T.); +#49054 = FACE_BOUND('',#49055,.T.); +#49055 = EDGE_LOOP('',(#49056,#49062,#49063,#49064)); +#49056 = ORIENTED_EDGE('',*,*,#49057,.T.); +#49057 = EDGE_CURVE('',#46361,#46297,#49058,.T.); +#49058 = LINE('',#49059,#49060); +#49059 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#49060 = VECTOR('',#49061,1.); +#49061 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49062 = ORIENTED_EDGE('',*,*,#46304,.T.); +#49063 = ORIENTED_EDGE('',*,*,#49040,.F.); +#49064 = ORIENTED_EDGE('',*,*,#46368,.F.); +#49065 = PLANE('',#49066); +#49066 = AXIS2_PLACEMENT_3D('',#49067,#49068,#49069); +#49067 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#49068 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49069 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49070 = ADVANCED_FACE('',(#49071),#49077,.T.); +#49071 = FACE_BOUND('',#49072,.T.); +#49072 = EDGE_LOOP('',(#49073,#49074,#49075,#49076)); +#49073 = ORIENTED_EDGE('',*,*,#46334,.T.); +#49074 = ORIENTED_EDGE('',*,*,#46296,.T.); +#49075 = ORIENTED_EDGE('',*,*,#49057,.F.); +#49076 = ORIENTED_EDGE('',*,*,#46360,.F.); +#49077 = PLANE('',#49078); +#49078 = AXIS2_PLACEMENT_3D('',#49079,#49080,#49081); +#49079 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#49080 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49081 = DIRECTION('',(0.,0.,-1.)); +#49082 = ADVANCED_FACE('',(#49083),#49094,.T.); +#49083 = FACE_BOUND('',#49084,.T.); +#49084 = EDGE_LOOP('',(#49085,#49091,#49092,#49093)); +#49085 = ORIENTED_EDGE('',*,*,#49086,.T.); +#49086 = EDGE_CURVE('',#46480,#46416,#49087,.T.); +#49087 = LINE('',#49088,#49089); +#49088 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#49089 = VECTOR('',#49090,1.); +#49090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49091 = ORIENTED_EDGE('',*,*,#46415,.T.); +#49092 = ORIENTED_EDGE('',*,*,#46400,.F.); +#49093 = ORIENTED_EDGE('',*,*,#46479,.F.); +#49094 = PLANE('',#49095); +#49095 = AXIS2_PLACEMENT_3D('',#49096,#49097,#49098); +#49096 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#49097 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49098 = DIRECTION('',(0.,0.,1.)); +#49099 = ADVANCED_FACE('',(#49100),#49111,.T.); +#49100 = FACE_BOUND('',#49101,.T.); +#49101 = EDGE_LOOP('',(#49102,#49108,#49109,#49110)); +#49102 = ORIENTED_EDGE('',*,*,#49103,.T.); +#49103 = EDGE_CURVE('',#46505,#46441,#49104,.T.); +#49104 = LINE('',#49105,#49106); +#49105 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#49106 = VECTOR('',#49107,1.); +#49107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49108 = ORIENTED_EDGE('',*,*,#46448,.T.); +#49109 = ORIENTED_EDGE('',*,*,#49086,.F.); +#49110 = ORIENTED_EDGE('',*,*,#46512,.F.); +#49111 = PLANE('',#49112); +#49112 = AXIS2_PLACEMENT_3D('',#49113,#49114,#49115); +#49113 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#49114 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49115 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49116 = ADVANCED_FACE('',(#49117),#49128,.T.); +#49117 = FACE_BOUND('',#49118,.T.); +#49118 = EDGE_LOOP('',(#49119,#49125,#49126,#49127)); +#49119 = ORIENTED_EDGE('',*,*,#49120,.T.); +#49120 = EDGE_CURVE('',#46497,#46433,#49121,.T.); +#49121 = LINE('',#49122,#49123); +#49122 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#49123 = VECTOR('',#49124,1.); +#49124 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49125 = ORIENTED_EDGE('',*,*,#46440,.T.); +#49126 = ORIENTED_EDGE('',*,*,#49103,.F.); +#49127 = ORIENTED_EDGE('',*,*,#46504,.T.); +#49128 = PLANE('',#49129); +#49129 = AXIS2_PLACEMENT_3D('',#49130,#49131,#49132); +#49130 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#49131 = DIRECTION('',(0.,-0.,-1.)); +#49132 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49133 = ADVANCED_FACE('',(#49134),#49145,.T.); +#49134 = FACE_BOUND('',#49135,.T.); +#49135 = EDGE_LOOP('',(#49136,#49142,#49143,#49144)); +#49136 = ORIENTED_EDGE('',*,*,#49137,.T.); +#49137 = EDGE_CURVE('',#46489,#46425,#49138,.T.); +#49138 = LINE('',#49139,#49140); +#49139 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#49140 = VECTOR('',#49141,1.); +#49141 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49142 = ORIENTED_EDGE('',*,*,#46432,.T.); +#49143 = ORIENTED_EDGE('',*,*,#49120,.F.); +#49144 = ORIENTED_EDGE('',*,*,#46496,.F.); +#49145 = PLANE('',#49146); +#49146 = AXIS2_PLACEMENT_3D('',#49147,#49148,#49149); +#49147 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#49148 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49149 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49150 = ADVANCED_FACE('',(#49151),#49157,.T.); +#49151 = FACE_BOUND('',#49152,.T.); +#49152 = EDGE_LOOP('',(#49153,#49154,#49155,#49156)); +#49153 = ORIENTED_EDGE('',*,*,#46462,.T.); +#49154 = ORIENTED_EDGE('',*,*,#46424,.T.); +#49155 = ORIENTED_EDGE('',*,*,#49137,.F.); +#49156 = ORIENTED_EDGE('',*,*,#46488,.F.); +#49157 = PLANE('',#49158); +#49158 = AXIS2_PLACEMENT_3D('',#49159,#49160,#49161); +#49159 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#49160 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49161 = DIRECTION('',(0.,0.,-1.)); +#49162 = ADVANCED_FACE('',(#49163),#49174,.T.); +#49163 = FACE_BOUND('',#49164,.T.); +#49164 = EDGE_LOOP('',(#49165,#49171,#49172,#49173)); +#49165 = ORIENTED_EDGE('',*,*,#49166,.T.); +#49166 = EDGE_CURVE('',#46608,#46544,#49167,.T.); +#49167 = LINE('',#49168,#49169); +#49168 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#49169 = VECTOR('',#49170,1.); +#49170 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49171 = ORIENTED_EDGE('',*,*,#46543,.T.); +#49172 = ORIENTED_EDGE('',*,*,#46528,.F.); +#49173 = ORIENTED_EDGE('',*,*,#46607,.F.); +#49174 = PLANE('',#49175); +#49175 = AXIS2_PLACEMENT_3D('',#49176,#49177,#49178); +#49176 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#49177 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49178 = DIRECTION('',(0.,0.,1.)); +#49179 = ADVANCED_FACE('',(#49180),#49191,.T.); +#49180 = FACE_BOUND('',#49181,.T.); +#49181 = EDGE_LOOP('',(#49182,#49188,#49189,#49190)); +#49182 = ORIENTED_EDGE('',*,*,#49183,.T.); +#49183 = EDGE_CURVE('',#46633,#46569,#49184,.T.); +#49184 = LINE('',#49185,#49186); +#49185 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#49186 = VECTOR('',#49187,1.); +#49187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49188 = ORIENTED_EDGE('',*,*,#46576,.T.); +#49189 = ORIENTED_EDGE('',*,*,#49166,.F.); +#49190 = ORIENTED_EDGE('',*,*,#46640,.F.); +#49191 = PLANE('',#49192); +#49192 = AXIS2_PLACEMENT_3D('',#49193,#49194,#49195); +#49193 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#49194 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49195 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49196 = ADVANCED_FACE('',(#49197),#49208,.T.); +#49197 = FACE_BOUND('',#49198,.T.); +#49198 = EDGE_LOOP('',(#49199,#49205,#49206,#49207)); +#49199 = ORIENTED_EDGE('',*,*,#49200,.T.); +#49200 = EDGE_CURVE('',#46625,#46561,#49201,.T.); +#49201 = LINE('',#49202,#49203); +#49202 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#49203 = VECTOR('',#49204,1.); +#49204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49205 = ORIENTED_EDGE('',*,*,#46568,.T.); +#49206 = ORIENTED_EDGE('',*,*,#49183,.F.); +#49207 = ORIENTED_EDGE('',*,*,#46632,.T.); +#49208 = PLANE('',#49209); +#49209 = AXIS2_PLACEMENT_3D('',#49210,#49211,#49212); +#49210 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#49211 = DIRECTION('',(0.,-0.,-1.)); +#49212 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49213 = ADVANCED_FACE('',(#49214),#49225,.T.); +#49214 = FACE_BOUND('',#49215,.T.); +#49215 = EDGE_LOOP('',(#49216,#49222,#49223,#49224)); +#49216 = ORIENTED_EDGE('',*,*,#49217,.T.); +#49217 = EDGE_CURVE('',#46617,#46553,#49218,.T.); +#49218 = LINE('',#49219,#49220); +#49219 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#49220 = VECTOR('',#49221,1.); +#49221 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49222 = ORIENTED_EDGE('',*,*,#46560,.T.); +#49223 = ORIENTED_EDGE('',*,*,#49200,.F.); +#49224 = ORIENTED_EDGE('',*,*,#46624,.F.); +#49225 = PLANE('',#49226); +#49226 = AXIS2_PLACEMENT_3D('',#49227,#49228,#49229); +#49227 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#49228 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49229 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49230 = ADVANCED_FACE('',(#49231),#49237,.T.); +#49231 = FACE_BOUND('',#49232,.T.); +#49232 = EDGE_LOOP('',(#49233,#49234,#49235,#49236)); +#49233 = ORIENTED_EDGE('',*,*,#46590,.T.); +#49234 = ORIENTED_EDGE('',*,*,#46552,.T.); +#49235 = ORIENTED_EDGE('',*,*,#49217,.F.); +#49236 = ORIENTED_EDGE('',*,*,#46616,.F.); +#49237 = PLANE('',#49238); +#49238 = AXIS2_PLACEMENT_3D('',#49239,#49240,#49241); +#49239 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#49240 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49241 = DIRECTION('',(0.,0.,-1.)); +#49242 = ADVANCED_FACE('',(#49243),#49254,.T.); +#49243 = FACE_BOUND('',#49244,.T.); +#49244 = EDGE_LOOP('',(#49245,#49251,#49252,#49253)); +#49245 = ORIENTED_EDGE('',*,*,#49246,.T.); +#49246 = EDGE_CURVE('',#46736,#46672,#49247,.T.); +#49247 = LINE('',#49248,#49249); +#49248 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#49249 = VECTOR('',#49250,1.); +#49250 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49251 = ORIENTED_EDGE('',*,*,#46671,.T.); +#49252 = ORIENTED_EDGE('',*,*,#46656,.F.); +#49253 = ORIENTED_EDGE('',*,*,#46735,.F.); +#49254 = PLANE('',#49255); +#49255 = AXIS2_PLACEMENT_3D('',#49256,#49257,#49258); +#49256 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#49257 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49258 = DIRECTION('',(0.,0.,1.)); +#49259 = ADVANCED_FACE('',(#49260),#49271,.T.); +#49260 = FACE_BOUND('',#49261,.T.); +#49261 = EDGE_LOOP('',(#49262,#49268,#49269,#49270)); +#49262 = ORIENTED_EDGE('',*,*,#49263,.T.); +#49263 = EDGE_CURVE('',#46761,#46697,#49264,.T.); +#49264 = LINE('',#49265,#49266); +#49265 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#49266 = VECTOR('',#49267,1.); +#49267 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49268 = ORIENTED_EDGE('',*,*,#46704,.T.); +#49269 = ORIENTED_EDGE('',*,*,#49246,.F.); +#49270 = ORIENTED_EDGE('',*,*,#46768,.F.); +#49271 = PLANE('',#49272); +#49272 = AXIS2_PLACEMENT_3D('',#49273,#49274,#49275); +#49273 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#49274 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49275 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49276 = ADVANCED_FACE('',(#49277),#49288,.T.); +#49277 = FACE_BOUND('',#49278,.T.); +#49278 = EDGE_LOOP('',(#49279,#49285,#49286,#49287)); +#49279 = ORIENTED_EDGE('',*,*,#49280,.T.); +#49280 = EDGE_CURVE('',#46753,#46689,#49281,.T.); +#49281 = LINE('',#49282,#49283); +#49282 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#49283 = VECTOR('',#49284,1.); +#49284 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49285 = ORIENTED_EDGE('',*,*,#46696,.T.); +#49286 = ORIENTED_EDGE('',*,*,#49263,.F.); +#49287 = ORIENTED_EDGE('',*,*,#46760,.T.); +#49288 = PLANE('',#49289); +#49289 = AXIS2_PLACEMENT_3D('',#49290,#49291,#49292); +#49290 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#49291 = DIRECTION('',(0.,-0.,-1.)); +#49292 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49293 = ADVANCED_FACE('',(#49294),#49305,.T.); +#49294 = FACE_BOUND('',#49295,.T.); +#49295 = EDGE_LOOP('',(#49296,#49302,#49303,#49304)); +#49296 = ORIENTED_EDGE('',*,*,#49297,.T.); +#49297 = EDGE_CURVE('',#46745,#46681,#49298,.T.); +#49298 = LINE('',#49299,#49300); +#49299 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#49300 = VECTOR('',#49301,1.); +#49301 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49302 = ORIENTED_EDGE('',*,*,#46688,.T.); +#49303 = ORIENTED_EDGE('',*,*,#49280,.F.); +#49304 = ORIENTED_EDGE('',*,*,#46752,.F.); +#49305 = PLANE('',#49306); +#49306 = AXIS2_PLACEMENT_3D('',#49307,#49308,#49309); +#49307 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#49308 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49309 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49310 = ADVANCED_FACE('',(#49311),#49317,.T.); +#49311 = FACE_BOUND('',#49312,.T.); +#49312 = EDGE_LOOP('',(#49313,#49314,#49315,#49316)); +#49313 = ORIENTED_EDGE('',*,*,#46718,.T.); +#49314 = ORIENTED_EDGE('',*,*,#46680,.T.); +#49315 = ORIENTED_EDGE('',*,*,#49297,.F.); +#49316 = ORIENTED_EDGE('',*,*,#46744,.F.); +#49317 = PLANE('',#49318); +#49318 = AXIS2_PLACEMENT_3D('',#49319,#49320,#49321); +#49319 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#49320 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49321 = DIRECTION('',(0.,0.,-1.)); +#49322 = ADVANCED_FACE('',(#49323),#49334,.T.); +#49323 = FACE_BOUND('',#49324,.T.); +#49324 = EDGE_LOOP('',(#49325,#49331,#49332,#49333)); +#49325 = ORIENTED_EDGE('',*,*,#49326,.T.); +#49326 = EDGE_CURVE('',#46864,#46800,#49327,.T.); +#49327 = LINE('',#49328,#49329); +#49328 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#49329 = VECTOR('',#49330,1.); +#49330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49331 = ORIENTED_EDGE('',*,*,#46799,.T.); +#49332 = ORIENTED_EDGE('',*,*,#46784,.F.); +#49333 = ORIENTED_EDGE('',*,*,#46863,.F.); +#49334 = PLANE('',#49335); +#49335 = AXIS2_PLACEMENT_3D('',#49336,#49337,#49338); +#49336 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#49337 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49338 = DIRECTION('',(0.,0.,1.)); +#49339 = ADVANCED_FACE('',(#49340),#49351,.T.); +#49340 = FACE_BOUND('',#49341,.T.); +#49341 = EDGE_LOOP('',(#49342,#49348,#49349,#49350)); +#49342 = ORIENTED_EDGE('',*,*,#49343,.T.); +#49343 = EDGE_CURVE('',#46889,#46825,#49344,.T.); +#49344 = LINE('',#49345,#49346); +#49345 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#49346 = VECTOR('',#49347,1.); +#49347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49348 = ORIENTED_EDGE('',*,*,#46832,.T.); +#49349 = ORIENTED_EDGE('',*,*,#49326,.F.); +#49350 = ORIENTED_EDGE('',*,*,#46896,.F.); +#49351 = PLANE('',#49352); +#49352 = AXIS2_PLACEMENT_3D('',#49353,#49354,#49355); +#49353 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#49354 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49355 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49356 = ADVANCED_FACE('',(#49357),#49368,.T.); +#49357 = FACE_BOUND('',#49358,.T.); +#49358 = EDGE_LOOP('',(#49359,#49365,#49366,#49367)); +#49359 = ORIENTED_EDGE('',*,*,#49360,.T.); +#49360 = EDGE_CURVE('',#46881,#46817,#49361,.T.); +#49361 = LINE('',#49362,#49363); +#49362 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#49363 = VECTOR('',#49364,1.); +#49364 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49365 = ORIENTED_EDGE('',*,*,#46824,.T.); +#49366 = ORIENTED_EDGE('',*,*,#49343,.F.); +#49367 = ORIENTED_EDGE('',*,*,#46888,.T.); +#49368 = PLANE('',#49369); +#49369 = AXIS2_PLACEMENT_3D('',#49370,#49371,#49372); +#49370 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#49371 = DIRECTION('',(0.,-0.,-1.)); +#49372 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49373 = ADVANCED_FACE('',(#49374),#49385,.T.); +#49374 = FACE_BOUND('',#49375,.T.); +#49375 = EDGE_LOOP('',(#49376,#49382,#49383,#49384)); +#49376 = ORIENTED_EDGE('',*,*,#49377,.T.); +#49377 = EDGE_CURVE('',#46873,#46809,#49378,.T.); +#49378 = LINE('',#49379,#49380); +#49379 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#49380 = VECTOR('',#49381,1.); +#49381 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49382 = ORIENTED_EDGE('',*,*,#46816,.T.); +#49383 = ORIENTED_EDGE('',*,*,#49360,.F.); +#49384 = ORIENTED_EDGE('',*,*,#46880,.F.); +#49385 = PLANE('',#49386); +#49386 = AXIS2_PLACEMENT_3D('',#49387,#49388,#49389); +#49387 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#49388 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49389 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49390 = ADVANCED_FACE('',(#49391),#49397,.T.); +#49391 = FACE_BOUND('',#49392,.T.); +#49392 = EDGE_LOOP('',(#49393,#49394,#49395,#49396)); +#49393 = ORIENTED_EDGE('',*,*,#46846,.T.); +#49394 = ORIENTED_EDGE('',*,*,#46808,.T.); +#49395 = ORIENTED_EDGE('',*,*,#49377,.F.); +#49396 = ORIENTED_EDGE('',*,*,#46872,.F.); +#49397 = PLANE('',#49398); +#49398 = AXIS2_PLACEMENT_3D('',#49399,#49400,#49401); +#49399 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#49400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49401 = DIRECTION('',(0.,0.,-1.)); +#49402 = ADVANCED_FACE('',(#49403),#49414,.T.); +#49403 = FACE_BOUND('',#49404,.T.); +#49404 = EDGE_LOOP('',(#49405,#49411,#49412,#49413)); +#49405 = ORIENTED_EDGE('',*,*,#49406,.T.); +#49406 = EDGE_CURVE('',#46992,#46928,#49407,.T.); +#49407 = LINE('',#49408,#49409); +#49408 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#49409 = VECTOR('',#49410,1.); +#49410 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49411 = ORIENTED_EDGE('',*,*,#46927,.T.); +#49412 = ORIENTED_EDGE('',*,*,#46912,.F.); +#49413 = ORIENTED_EDGE('',*,*,#46991,.F.); +#49414 = PLANE('',#49415); +#49415 = AXIS2_PLACEMENT_3D('',#49416,#49417,#49418); +#49416 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#49417 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49418 = DIRECTION('',(0.,0.,1.)); +#49419 = ADVANCED_FACE('',(#49420),#49431,.T.); +#49420 = FACE_BOUND('',#49421,.T.); +#49421 = EDGE_LOOP('',(#49422,#49428,#49429,#49430)); +#49422 = ORIENTED_EDGE('',*,*,#49423,.T.); +#49423 = EDGE_CURVE('',#47017,#46953,#49424,.T.); +#49424 = LINE('',#49425,#49426); +#49425 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#49426 = VECTOR('',#49427,1.); +#49427 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49428 = ORIENTED_EDGE('',*,*,#46960,.T.); +#49429 = ORIENTED_EDGE('',*,*,#49406,.F.); +#49430 = ORIENTED_EDGE('',*,*,#47024,.F.); +#49431 = PLANE('',#49432); +#49432 = AXIS2_PLACEMENT_3D('',#49433,#49434,#49435); +#49433 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#49434 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49435 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49436 = ADVANCED_FACE('',(#49437),#49448,.T.); +#49437 = FACE_BOUND('',#49438,.T.); +#49438 = EDGE_LOOP('',(#49439,#49445,#49446,#49447)); +#49439 = ORIENTED_EDGE('',*,*,#49440,.T.); +#49440 = EDGE_CURVE('',#47009,#46945,#49441,.T.); +#49441 = LINE('',#49442,#49443); +#49442 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#49443 = VECTOR('',#49444,1.); +#49444 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49445 = ORIENTED_EDGE('',*,*,#46952,.T.); +#49446 = ORIENTED_EDGE('',*,*,#49423,.F.); +#49447 = ORIENTED_EDGE('',*,*,#47016,.T.); +#49448 = PLANE('',#49449); +#49449 = AXIS2_PLACEMENT_3D('',#49450,#49451,#49452); +#49450 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#49451 = DIRECTION('',(0.,-0.,-1.)); +#49452 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49453 = ADVANCED_FACE('',(#49454),#49465,.T.); +#49454 = FACE_BOUND('',#49455,.T.); +#49455 = EDGE_LOOP('',(#49456,#49462,#49463,#49464)); +#49456 = ORIENTED_EDGE('',*,*,#49457,.T.); +#49457 = EDGE_CURVE('',#47001,#46937,#49458,.T.); +#49458 = LINE('',#49459,#49460); +#49459 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#49460 = VECTOR('',#49461,1.); +#49461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49462 = ORIENTED_EDGE('',*,*,#46944,.T.); +#49463 = ORIENTED_EDGE('',*,*,#49440,.F.); +#49464 = ORIENTED_EDGE('',*,*,#47008,.F.); +#49465 = PLANE('',#49466); +#49466 = AXIS2_PLACEMENT_3D('',#49467,#49468,#49469); +#49467 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#49468 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49469 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49470 = ADVANCED_FACE('',(#49471),#49477,.T.); +#49471 = FACE_BOUND('',#49472,.T.); +#49472 = EDGE_LOOP('',(#49473,#49474,#49475,#49476)); +#49473 = ORIENTED_EDGE('',*,*,#46974,.T.); +#49474 = ORIENTED_EDGE('',*,*,#46936,.T.); +#49475 = ORIENTED_EDGE('',*,*,#49457,.F.); +#49476 = ORIENTED_EDGE('',*,*,#47000,.F.); +#49477 = PLANE('',#49478); +#49478 = AXIS2_PLACEMENT_3D('',#49479,#49480,#49481); +#49479 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#49480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49481 = DIRECTION('',(0.,0.,-1.)); +#49482 = ADVANCED_FACE('',(#49483),#49494,.T.); +#49483 = FACE_BOUND('',#49484,.T.); +#49484 = EDGE_LOOP('',(#49485,#49491,#49492,#49493)); +#49485 = ORIENTED_EDGE('',*,*,#49486,.T.); +#49486 = EDGE_CURVE('',#47120,#47056,#49487,.T.); +#49487 = LINE('',#49488,#49489); +#49488 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#49489 = VECTOR('',#49490,1.); +#49490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49491 = ORIENTED_EDGE('',*,*,#47055,.T.); +#49492 = ORIENTED_EDGE('',*,*,#47040,.F.); +#49493 = ORIENTED_EDGE('',*,*,#47119,.F.); +#49494 = PLANE('',#49495); +#49495 = AXIS2_PLACEMENT_3D('',#49496,#49497,#49498); +#49496 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#49497 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49498 = DIRECTION('',(0.,0.,1.)); +#49499 = ADVANCED_FACE('',(#49500),#49511,.T.); +#49500 = FACE_BOUND('',#49501,.T.); +#49501 = EDGE_LOOP('',(#49502,#49508,#49509,#49510)); +#49502 = ORIENTED_EDGE('',*,*,#49503,.T.); +#49503 = EDGE_CURVE('',#47145,#47081,#49504,.T.); +#49504 = LINE('',#49505,#49506); +#49505 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#49506 = VECTOR('',#49507,1.); +#49507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49508 = ORIENTED_EDGE('',*,*,#47088,.T.); +#49509 = ORIENTED_EDGE('',*,*,#49486,.F.); +#49510 = ORIENTED_EDGE('',*,*,#47152,.F.); +#49511 = PLANE('',#49512); +#49512 = AXIS2_PLACEMENT_3D('',#49513,#49514,#49515); +#49513 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#49514 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49515 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49516 = ADVANCED_FACE('',(#49517),#49528,.T.); +#49517 = FACE_BOUND('',#49518,.T.); +#49518 = EDGE_LOOP('',(#49519,#49525,#49526,#49527)); +#49519 = ORIENTED_EDGE('',*,*,#49520,.T.); +#49520 = EDGE_CURVE('',#47137,#47073,#49521,.T.); +#49521 = LINE('',#49522,#49523); +#49522 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#49523 = VECTOR('',#49524,1.); +#49524 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49525 = ORIENTED_EDGE('',*,*,#47080,.T.); +#49526 = ORIENTED_EDGE('',*,*,#49503,.F.); +#49527 = ORIENTED_EDGE('',*,*,#47144,.T.); +#49528 = PLANE('',#49529); +#49529 = AXIS2_PLACEMENT_3D('',#49530,#49531,#49532); +#49530 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#49531 = DIRECTION('',(0.,-0.,-1.)); +#49532 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49533 = ADVANCED_FACE('',(#49534),#49545,.T.); +#49534 = FACE_BOUND('',#49535,.T.); +#49535 = EDGE_LOOP('',(#49536,#49542,#49543,#49544)); +#49536 = ORIENTED_EDGE('',*,*,#49537,.T.); +#49537 = EDGE_CURVE('',#47129,#47065,#49538,.T.); +#49538 = LINE('',#49539,#49540); +#49539 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#49540 = VECTOR('',#49541,1.); +#49541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49542 = ORIENTED_EDGE('',*,*,#47072,.T.); +#49543 = ORIENTED_EDGE('',*,*,#49520,.F.); +#49544 = ORIENTED_EDGE('',*,*,#47136,.F.); +#49545 = PLANE('',#49546); +#49546 = AXIS2_PLACEMENT_3D('',#49547,#49548,#49549); +#49547 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#49548 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49549 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49550 = ADVANCED_FACE('',(#49551),#49557,.T.); +#49551 = FACE_BOUND('',#49552,.T.); +#49552 = EDGE_LOOP('',(#49553,#49554,#49555,#49556)); +#49553 = ORIENTED_EDGE('',*,*,#47102,.T.); +#49554 = ORIENTED_EDGE('',*,*,#47064,.T.); +#49555 = ORIENTED_EDGE('',*,*,#49537,.F.); +#49556 = ORIENTED_EDGE('',*,*,#47128,.F.); +#49557 = PLANE('',#49558); +#49558 = AXIS2_PLACEMENT_3D('',#49559,#49560,#49561); +#49559 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#49560 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49561 = DIRECTION('',(0.,0.,-1.)); +#49562 = ADVANCED_FACE('',(#49563),#49574,.T.); +#49563 = FACE_BOUND('',#49564,.T.); +#49564 = EDGE_LOOP('',(#49565,#49566,#49567,#49568)); +#49565 = ORIENTED_EDGE('',*,*,#47311,.T.); +#49566 = ORIENTED_EDGE('',*,*,#47174,.T.); +#49567 = ORIENTED_EDGE('',*,*,#47199,.T.); +#49568 = ORIENTED_EDGE('',*,*,#49569,.T.); +#49569 = EDGE_CURVE('',#47200,#47304,#49570,.T.); +#49570 = LINE('',#49571,#49572); +#49571 = CARTESIAN_POINT('',(0.1,-18.,0.9)); +#49572 = VECTOR('',#49573,1.); +#49573 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49574 = PLANE('',#49575); +#49575 = AXIS2_PLACEMENT_3D('',#49576,#49577,#49578); +#49576 = CARTESIAN_POINT('',(-1.97064586871E-15,-18.,0.9)); +#49577 = DIRECTION('',(0.,0.,1.)); +#49578 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49579 = ADVANCED_FACE('',(#49580),#49591,.T.); +#49580 = FACE_BOUND('',#49581,.T.); +#49581 = EDGE_LOOP('',(#49582,#49583,#49589,#49590)); +#49582 = ORIENTED_EDGE('',*,*,#47279,.T.); +#49583 = ORIENTED_EDGE('',*,*,#49584,.F.); +#49584 = EDGE_CURVE('',#47224,#47280,#49585,.T.); +#49585 = LINE('',#49586,#49587); +#49586 = CARTESIAN_POINT('',(-0.1,-18.,0.9)); +#49587 = VECTOR('',#49588,1.); +#49588 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49589 = ORIENTED_EDGE('',*,*,#47231,.T.); +#49590 = ORIENTED_EDGE('',*,*,#47254,.T.); +#49591 = PLANE('',#49592); +#49592 = AXIS2_PLACEMENT_3D('',#49593,#49594,#49595); +#49593 = CARTESIAN_POINT('',(-1.97064586871E-15,-18.,0.9)); +#49594 = DIRECTION('',(0.,0.,1.)); +#49595 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49596 = ADVANCED_FACE('',(#49597),#49640,.T.); +#49597 = FACE_BOUND('',#49598,.T.); +#49598 = EDGE_LOOP('',(#49599,#49600,#49608,#49616,#49624,#49632,#49638, + #49639)); +#49599 = ORIENTED_EDGE('',*,*,#47287,.F.); +#49600 = ORIENTED_EDGE('',*,*,#49601,.T.); +#49601 = EDGE_CURVE('',#47288,#49602,#49604,.T.); +#49602 = VERTEX_POINT('',#49603); +#49603 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#49604 = LINE('',#49605,#49606); +#49605 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#49606 = VECTOR('',#49607,1.); +#49607 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49608 = ORIENTED_EDGE('',*,*,#49609,.T.); +#49609 = EDGE_CURVE('',#49602,#49610,#49612,.T.); +#49610 = VERTEX_POINT('',#49611); +#49611 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#49612 = LINE('',#49613,#49614); +#49613 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#49614 = VECTOR('',#49615,1.); +#49615 = DIRECTION('',(0.,0.,-1.)); +#49616 = ORIENTED_EDGE('',*,*,#49617,.T.); +#49617 = EDGE_CURVE('',#49610,#49618,#49620,.T.); +#49618 = VERTEX_POINT('',#49619); +#49619 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#49620 = LINE('',#49621,#49622); +#49621 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#49622 = VECTOR('',#49623,1.); +#49623 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49624 = ORIENTED_EDGE('',*,*,#49625,.T.); +#49625 = EDGE_CURVE('',#49618,#49626,#49628,.T.); +#49626 = VERTEX_POINT('',#49627); +#49627 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49628 = LINE('',#49629,#49630); +#49629 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#49630 = VECTOR('',#49631,1.); +#49631 = DIRECTION('',(0.,0.,1.)); +#49632 = ORIENTED_EDGE('',*,*,#49633,.T.); +#49633 = EDGE_CURVE('',#49626,#47216,#49634,.T.); +#49634 = LINE('',#49635,#49636); +#49635 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49636 = VECTOR('',#49637,1.); +#49637 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49638 = ORIENTED_EDGE('',*,*,#47223,.F.); +#49639 = ORIENTED_EDGE('',*,*,#49584,.T.); +#49640 = PLANE('',#49641); +#49641 = AXIS2_PLACEMENT_3D('',#49642,#49643,#49644); +#49642 = CARTESIAN_POINT('',(-0.1,-18.,2.448597401424)); +#49643 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49644 = DIRECTION('',(0.,0.,1.)); +#49645 = ADVANCED_FACE('',(#49646),#49664,.T.); +#49646 = FACE_BOUND('',#49647,.T.); +#49647 = EDGE_LOOP('',(#49648,#49656,#49662,#49663)); +#49648 = ORIENTED_EDGE('',*,*,#49649,.T.); +#49649 = EDGE_CURVE('',#49626,#49650,#49652,.T.); +#49650 = VERTEX_POINT('',#49651); +#49651 = CARTESIAN_POINT('',(0.1,-17.75,4.45)); +#49652 = LINE('',#49653,#49654); +#49653 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49654 = VECTOR('',#49655,1.); +#49655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49656 = ORIENTED_EDGE('',*,*,#49657,.T.); +#49657 = EDGE_CURVE('',#49650,#47208,#49658,.T.); +#49658 = LINE('',#49659,#49660); +#49659 = CARTESIAN_POINT('',(0.1,-17.75,4.45)); +#49660 = VECTOR('',#49661,1.); +#49661 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49662 = ORIENTED_EDGE('',*,*,#47215,.F.); +#49663 = ORIENTED_EDGE('',*,*,#49633,.F.); +#49664 = PLANE('',#49665); +#49665 = AXIS2_PLACEMENT_3D('',#49666,#49667,#49668); +#49666 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49667 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#49668 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49669 = ADVANCED_FACE('',(#49670),#49706,.F.); +#49670 = FACE_BOUND('',#49671,.F.); +#49671 = EDGE_LOOP('',(#49672,#49673,#49681,#49689,#49697,#49703,#49704, + #49705)); +#49672 = ORIENTED_EDGE('',*,*,#47303,.F.); +#49673 = ORIENTED_EDGE('',*,*,#49674,.T.); +#49674 = EDGE_CURVE('',#47296,#49675,#49677,.T.); +#49675 = VERTEX_POINT('',#49676); +#49676 = CARTESIAN_POINT('',(0.1,-18.25,4.45)); +#49677 = LINE('',#49678,#49679); +#49678 = CARTESIAN_POINT('',(0.1,-18.3,4.5)); +#49679 = VECTOR('',#49680,1.); +#49680 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49681 = ORIENTED_EDGE('',*,*,#49682,.T.); +#49682 = EDGE_CURVE('',#49675,#49683,#49685,.T.); +#49683 = VERTEX_POINT('',#49684); +#49684 = CARTESIAN_POINT('',(0.1,-18.25,1.25)); +#49685 = LINE('',#49686,#49687); +#49686 = CARTESIAN_POINT('',(0.1,-18.25,4.45)); +#49687 = VECTOR('',#49688,1.); +#49688 = DIRECTION('',(0.,0.,-1.)); +#49689 = ORIENTED_EDGE('',*,*,#49690,.T.); +#49690 = EDGE_CURVE('',#49683,#49691,#49693,.T.); +#49691 = VERTEX_POINT('',#49692); +#49692 = CARTESIAN_POINT('',(0.1,-17.75,1.25)); +#49693 = LINE('',#49694,#49695); +#49694 = CARTESIAN_POINT('',(0.1,-18.25,1.25)); +#49695 = VECTOR('',#49696,1.); +#49696 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49697 = ORIENTED_EDGE('',*,*,#49698,.T.); +#49698 = EDGE_CURVE('',#49691,#49650,#49699,.T.); +#49699 = LINE('',#49700,#49701); +#49700 = CARTESIAN_POINT('',(0.1,-17.75,1.25)); +#49701 = VECTOR('',#49702,1.); +#49702 = DIRECTION('',(0.,0.,1.)); +#49703 = ORIENTED_EDGE('',*,*,#49657,.T.); +#49704 = ORIENTED_EDGE('',*,*,#47207,.F.); +#49705 = ORIENTED_EDGE('',*,*,#49569,.T.); +#49706 = PLANE('',#49707); +#49707 = AXIS2_PLACEMENT_3D('',#49708,#49709,#49710); +#49708 = CARTESIAN_POINT('',(0.1,-18.,2.448597401424)); +#49709 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49710 = DIRECTION('',(0.,0.,1.)); +#49711 = ADVANCED_FACE('',(#49712),#49723,.T.); +#49712 = FACE_BOUND('',#49713,.T.); +#49713 = EDGE_LOOP('',(#49714,#49715,#49716,#49722)); +#49714 = ORIENTED_EDGE('',*,*,#47295,.T.); +#49715 = ORIENTED_EDGE('',*,*,#49674,.T.); +#49716 = ORIENTED_EDGE('',*,*,#49717,.F.); +#49717 = EDGE_CURVE('',#49602,#49675,#49718,.T.); +#49718 = LINE('',#49719,#49720); +#49719 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#49720 = VECTOR('',#49721,1.); +#49721 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49722 = ORIENTED_EDGE('',*,*,#49601,.F.); +#49723 = PLANE('',#49724); +#49724 = AXIS2_PLACEMENT_3D('',#49725,#49726,#49727); +#49725 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#49726 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49727 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49728 = ADVANCED_FACE('',(#49729),#49740,.T.); +#49729 = FACE_BOUND('',#49730,.T.); +#49730 = EDGE_LOOP('',(#49731,#49732,#49733,#49734)); +#49731 = ORIENTED_EDGE('',*,*,#47471,.T.); +#49732 = ORIENTED_EDGE('',*,*,#47334,.T.); +#49733 = ORIENTED_EDGE('',*,*,#47359,.T.); +#49734 = ORIENTED_EDGE('',*,*,#49735,.T.); +#49735 = EDGE_CURVE('',#47360,#47464,#49736,.T.); +#49736 = LINE('',#49737,#49738); +#49737 = CARTESIAN_POINT('',(0.1,-16.,0.9)); +#49738 = VECTOR('',#49739,1.); +#49739 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49740 = PLANE('',#49741); +#49741 = AXIS2_PLACEMENT_3D('',#49742,#49743,#49744); +#49742 = CARTESIAN_POINT('',(-1.748601263785E-15,-16.,0.9)); +#49743 = DIRECTION('',(0.,0.,1.)); +#49744 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49745 = ADVANCED_FACE('',(#49746),#49757,.T.); +#49746 = FACE_BOUND('',#49747,.T.); +#49747 = EDGE_LOOP('',(#49748,#49749,#49755,#49756)); +#49748 = ORIENTED_EDGE('',*,*,#47439,.T.); +#49749 = ORIENTED_EDGE('',*,*,#49750,.F.); +#49750 = EDGE_CURVE('',#47384,#47440,#49751,.T.); +#49751 = LINE('',#49752,#49753); +#49752 = CARTESIAN_POINT('',(-0.1,-16.,0.9)); +#49753 = VECTOR('',#49754,1.); +#49754 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49755 = ORIENTED_EDGE('',*,*,#47391,.T.); +#49756 = ORIENTED_EDGE('',*,*,#47414,.T.); +#49757 = PLANE('',#49758); +#49758 = AXIS2_PLACEMENT_3D('',#49759,#49760,#49761); +#49759 = CARTESIAN_POINT('',(-1.748601263785E-15,-16.,0.9)); +#49760 = DIRECTION('',(0.,0.,1.)); +#49761 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49762 = ADVANCED_FACE('',(#49763),#49806,.T.); +#49763 = FACE_BOUND('',#49764,.T.); +#49764 = EDGE_LOOP('',(#49765,#49766,#49774,#49782,#49790,#49798,#49804, + #49805)); +#49765 = ORIENTED_EDGE('',*,*,#47447,.F.); +#49766 = ORIENTED_EDGE('',*,*,#49767,.T.); +#49767 = EDGE_CURVE('',#47448,#49768,#49770,.T.); +#49768 = VERTEX_POINT('',#49769); +#49769 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#49770 = LINE('',#49771,#49772); +#49771 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#49772 = VECTOR('',#49773,1.); +#49773 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49774 = ORIENTED_EDGE('',*,*,#49775,.T.); +#49775 = EDGE_CURVE('',#49768,#49776,#49778,.T.); +#49776 = VERTEX_POINT('',#49777); +#49777 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#49778 = LINE('',#49779,#49780); +#49779 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#49780 = VECTOR('',#49781,1.); +#49781 = DIRECTION('',(0.,0.,-1.)); +#49782 = ORIENTED_EDGE('',*,*,#49783,.T.); +#49783 = EDGE_CURVE('',#49776,#49784,#49786,.T.); +#49784 = VERTEX_POINT('',#49785); +#49785 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#49786 = LINE('',#49787,#49788); +#49787 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#49788 = VECTOR('',#49789,1.); +#49789 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49790 = ORIENTED_EDGE('',*,*,#49791,.T.); +#49791 = EDGE_CURVE('',#49784,#49792,#49794,.T.); +#49792 = VERTEX_POINT('',#49793); +#49793 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49794 = LINE('',#49795,#49796); +#49795 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#49796 = VECTOR('',#49797,1.); +#49797 = DIRECTION('',(0.,0.,1.)); +#49798 = ORIENTED_EDGE('',*,*,#49799,.T.); +#49799 = EDGE_CURVE('',#49792,#47376,#49800,.T.); +#49800 = LINE('',#49801,#49802); +#49801 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49802 = VECTOR('',#49803,1.); +#49803 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49804 = ORIENTED_EDGE('',*,*,#47383,.F.); +#49805 = ORIENTED_EDGE('',*,*,#49750,.T.); +#49806 = PLANE('',#49807); +#49807 = AXIS2_PLACEMENT_3D('',#49808,#49809,#49810); +#49808 = CARTESIAN_POINT('',(-0.1,-16.,2.448597401424)); +#49809 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49810 = DIRECTION('',(0.,0.,1.)); +#49811 = ADVANCED_FACE('',(#49812),#49830,.T.); +#49812 = FACE_BOUND('',#49813,.T.); +#49813 = EDGE_LOOP('',(#49814,#49822,#49828,#49829)); +#49814 = ORIENTED_EDGE('',*,*,#49815,.T.); +#49815 = EDGE_CURVE('',#49792,#49816,#49818,.T.); +#49816 = VERTEX_POINT('',#49817); +#49817 = CARTESIAN_POINT('',(0.1,-15.75,4.45)); +#49818 = LINE('',#49819,#49820); +#49819 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49820 = VECTOR('',#49821,1.); +#49821 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49822 = ORIENTED_EDGE('',*,*,#49823,.T.); +#49823 = EDGE_CURVE('',#49816,#47368,#49824,.T.); +#49824 = LINE('',#49825,#49826); +#49825 = CARTESIAN_POINT('',(0.1,-15.75,4.45)); +#49826 = VECTOR('',#49827,1.); +#49827 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49828 = ORIENTED_EDGE('',*,*,#47375,.F.); +#49829 = ORIENTED_EDGE('',*,*,#49799,.F.); +#49830 = PLANE('',#49831); +#49831 = AXIS2_PLACEMENT_3D('',#49832,#49833,#49834); +#49832 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49833 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#49834 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49835 = ADVANCED_FACE('',(#49836),#49872,.F.); +#49836 = FACE_BOUND('',#49837,.F.); +#49837 = EDGE_LOOP('',(#49838,#49839,#49847,#49855,#49863,#49869,#49870, + #49871)); +#49838 = ORIENTED_EDGE('',*,*,#47463,.F.); +#49839 = ORIENTED_EDGE('',*,*,#49840,.T.); +#49840 = EDGE_CURVE('',#47456,#49841,#49843,.T.); +#49841 = VERTEX_POINT('',#49842); +#49842 = CARTESIAN_POINT('',(0.1,-16.25,4.45)); +#49843 = LINE('',#49844,#49845); +#49844 = CARTESIAN_POINT('',(0.1,-16.3,4.5)); +#49845 = VECTOR('',#49846,1.); +#49846 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49847 = ORIENTED_EDGE('',*,*,#49848,.T.); +#49848 = EDGE_CURVE('',#49841,#49849,#49851,.T.); +#49849 = VERTEX_POINT('',#49850); +#49850 = CARTESIAN_POINT('',(0.1,-16.25,1.25)); +#49851 = LINE('',#49852,#49853); +#49852 = CARTESIAN_POINT('',(0.1,-16.25,4.45)); +#49853 = VECTOR('',#49854,1.); +#49854 = DIRECTION('',(0.,0.,-1.)); +#49855 = ORIENTED_EDGE('',*,*,#49856,.T.); +#49856 = EDGE_CURVE('',#49849,#49857,#49859,.T.); +#49857 = VERTEX_POINT('',#49858); +#49858 = CARTESIAN_POINT('',(0.1,-15.75,1.25)); +#49859 = LINE('',#49860,#49861); +#49860 = CARTESIAN_POINT('',(0.1,-16.25,1.25)); +#49861 = VECTOR('',#49862,1.); +#49862 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49863 = ORIENTED_EDGE('',*,*,#49864,.T.); +#49864 = EDGE_CURVE('',#49857,#49816,#49865,.T.); +#49865 = LINE('',#49866,#49867); +#49866 = CARTESIAN_POINT('',(0.1,-15.75,1.25)); +#49867 = VECTOR('',#49868,1.); +#49868 = DIRECTION('',(0.,0.,1.)); +#49869 = ORIENTED_EDGE('',*,*,#49823,.T.); +#49870 = ORIENTED_EDGE('',*,*,#47367,.F.); +#49871 = ORIENTED_EDGE('',*,*,#49735,.T.); +#49872 = PLANE('',#49873); +#49873 = AXIS2_PLACEMENT_3D('',#49874,#49875,#49876); +#49874 = CARTESIAN_POINT('',(0.1,-16.,2.448597401424)); +#49875 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49876 = DIRECTION('',(0.,0.,1.)); +#49877 = ADVANCED_FACE('',(#49878),#49889,.T.); +#49878 = FACE_BOUND('',#49879,.T.); +#49879 = EDGE_LOOP('',(#49880,#49881,#49882,#49888)); +#49880 = ORIENTED_EDGE('',*,*,#47455,.T.); +#49881 = ORIENTED_EDGE('',*,*,#49840,.T.); +#49882 = ORIENTED_EDGE('',*,*,#49883,.F.); +#49883 = EDGE_CURVE('',#49768,#49841,#49884,.T.); +#49884 = LINE('',#49885,#49886); +#49885 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#49886 = VECTOR('',#49887,1.); +#49887 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49888 = ORIENTED_EDGE('',*,*,#49767,.F.); +#49889 = PLANE('',#49890); +#49890 = AXIS2_PLACEMENT_3D('',#49891,#49892,#49893); +#49891 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#49892 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49893 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49894 = ADVANCED_FACE('',(#49895),#49906,.T.); +#49895 = FACE_BOUND('',#49896,.T.); +#49896 = EDGE_LOOP('',(#49897,#49898,#49899,#49900)); +#49897 = ORIENTED_EDGE('',*,*,#47631,.T.); +#49898 = ORIENTED_EDGE('',*,*,#47494,.T.); +#49899 = ORIENTED_EDGE('',*,*,#47519,.T.); +#49900 = ORIENTED_EDGE('',*,*,#49901,.T.); +#49901 = EDGE_CURVE('',#47520,#47624,#49902,.T.); +#49902 = LINE('',#49903,#49904); +#49903 = CARTESIAN_POINT('',(0.1,-14.,0.9)); +#49904 = VECTOR('',#49905,1.); +#49905 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49906 = PLANE('',#49907); +#49907 = AXIS2_PLACEMENT_3D('',#49908,#49909,#49910); +#49908 = CARTESIAN_POINT('',(-1.52655665886E-15,-14.,0.9)); +#49909 = DIRECTION('',(0.,0.,1.)); +#49910 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49911 = ADVANCED_FACE('',(#49912),#49923,.T.); +#49912 = FACE_BOUND('',#49913,.T.); +#49913 = EDGE_LOOP('',(#49914,#49915,#49921,#49922)); +#49914 = ORIENTED_EDGE('',*,*,#47599,.T.); +#49915 = ORIENTED_EDGE('',*,*,#49916,.F.); +#49916 = EDGE_CURVE('',#47544,#47600,#49917,.T.); +#49917 = LINE('',#49918,#49919); +#49918 = CARTESIAN_POINT('',(-0.1,-14.,0.9)); +#49919 = VECTOR('',#49920,1.); +#49920 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49921 = ORIENTED_EDGE('',*,*,#47551,.T.); +#49922 = ORIENTED_EDGE('',*,*,#47574,.T.); +#49923 = PLANE('',#49924); +#49924 = AXIS2_PLACEMENT_3D('',#49925,#49926,#49927); +#49925 = CARTESIAN_POINT('',(-1.52655665886E-15,-14.,0.9)); +#49926 = DIRECTION('',(0.,0.,1.)); +#49927 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49928 = ADVANCED_FACE('',(#49929),#49972,.T.); +#49929 = FACE_BOUND('',#49930,.T.); +#49930 = EDGE_LOOP('',(#49931,#49932,#49940,#49948,#49956,#49964,#49970, + #49971)); +#49931 = ORIENTED_EDGE('',*,*,#47607,.F.); +#49932 = ORIENTED_EDGE('',*,*,#49933,.T.); +#49933 = EDGE_CURVE('',#47608,#49934,#49936,.T.); +#49934 = VERTEX_POINT('',#49935); +#49935 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#49936 = LINE('',#49937,#49938); +#49937 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#49938 = VECTOR('',#49939,1.); +#49939 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49940 = ORIENTED_EDGE('',*,*,#49941,.T.); +#49941 = EDGE_CURVE('',#49934,#49942,#49944,.T.); +#49942 = VERTEX_POINT('',#49943); +#49943 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#49944 = LINE('',#49945,#49946); +#49945 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#49946 = VECTOR('',#49947,1.); +#49947 = DIRECTION('',(0.,0.,-1.)); +#49948 = ORIENTED_EDGE('',*,*,#49949,.T.); +#49949 = EDGE_CURVE('',#49942,#49950,#49952,.T.); +#49950 = VERTEX_POINT('',#49951); +#49951 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#49952 = LINE('',#49953,#49954); +#49953 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#49954 = VECTOR('',#49955,1.); +#49955 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49956 = ORIENTED_EDGE('',*,*,#49957,.T.); +#49957 = EDGE_CURVE('',#49950,#49958,#49960,.T.); +#49958 = VERTEX_POINT('',#49959); +#49959 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49960 = LINE('',#49961,#49962); +#49961 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#49962 = VECTOR('',#49963,1.); +#49963 = DIRECTION('',(0.,0.,1.)); +#49964 = ORIENTED_EDGE('',*,*,#49965,.T.); +#49965 = EDGE_CURVE('',#49958,#47536,#49966,.T.); +#49966 = LINE('',#49967,#49968); +#49967 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49968 = VECTOR('',#49969,1.); +#49969 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49970 = ORIENTED_EDGE('',*,*,#47543,.F.); +#49971 = ORIENTED_EDGE('',*,*,#49916,.T.); +#49972 = PLANE('',#49973); +#49973 = AXIS2_PLACEMENT_3D('',#49974,#49975,#49976); +#49974 = CARTESIAN_POINT('',(-0.1,-14.,2.448597401424)); +#49975 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49976 = DIRECTION('',(0.,0.,1.)); +#49977 = ADVANCED_FACE('',(#49978),#49996,.T.); +#49978 = FACE_BOUND('',#49979,.T.); +#49979 = EDGE_LOOP('',(#49980,#49988,#49994,#49995)); +#49980 = ORIENTED_EDGE('',*,*,#49981,.T.); +#49981 = EDGE_CURVE('',#49958,#49982,#49984,.T.); +#49982 = VERTEX_POINT('',#49983); +#49983 = CARTESIAN_POINT('',(0.1,-13.75,4.45)); +#49984 = LINE('',#49985,#49986); +#49985 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49986 = VECTOR('',#49987,1.); +#49987 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49988 = ORIENTED_EDGE('',*,*,#49989,.T.); +#49989 = EDGE_CURVE('',#49982,#47528,#49990,.T.); +#49990 = LINE('',#49991,#49992); +#49991 = CARTESIAN_POINT('',(0.1,-13.75,4.45)); +#49992 = VECTOR('',#49993,1.); +#49993 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49994 = ORIENTED_EDGE('',*,*,#47535,.F.); +#49995 = ORIENTED_EDGE('',*,*,#49965,.F.); +#49996 = PLANE('',#49997); +#49997 = AXIS2_PLACEMENT_3D('',#49998,#49999,#50000); +#49998 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49999 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50000 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50001 = ADVANCED_FACE('',(#50002),#50038,.F.); +#50002 = FACE_BOUND('',#50003,.F.); +#50003 = EDGE_LOOP('',(#50004,#50005,#50013,#50021,#50029,#50035,#50036, + #50037)); +#50004 = ORIENTED_EDGE('',*,*,#47623,.F.); +#50005 = ORIENTED_EDGE('',*,*,#50006,.T.); +#50006 = EDGE_CURVE('',#47616,#50007,#50009,.T.); +#50007 = VERTEX_POINT('',#50008); +#50008 = CARTESIAN_POINT('',(0.1,-14.25,4.45)); +#50009 = LINE('',#50010,#50011); +#50010 = CARTESIAN_POINT('',(0.1,-14.3,4.5)); +#50011 = VECTOR('',#50012,1.); +#50012 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50013 = ORIENTED_EDGE('',*,*,#50014,.T.); +#50014 = EDGE_CURVE('',#50007,#50015,#50017,.T.); +#50015 = VERTEX_POINT('',#50016); +#50016 = CARTESIAN_POINT('',(0.1,-14.25,1.25)); +#50017 = LINE('',#50018,#50019); +#50018 = CARTESIAN_POINT('',(0.1,-14.25,4.45)); +#50019 = VECTOR('',#50020,1.); +#50020 = DIRECTION('',(0.,0.,-1.)); +#50021 = ORIENTED_EDGE('',*,*,#50022,.T.); +#50022 = EDGE_CURVE('',#50015,#50023,#50025,.T.); +#50023 = VERTEX_POINT('',#50024); +#50024 = CARTESIAN_POINT('',(0.1,-13.75,1.25)); +#50025 = LINE('',#50026,#50027); +#50026 = CARTESIAN_POINT('',(0.1,-14.25,1.25)); +#50027 = VECTOR('',#50028,1.); +#50028 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50029 = ORIENTED_EDGE('',*,*,#50030,.T.); +#50030 = EDGE_CURVE('',#50023,#49982,#50031,.T.); +#50031 = LINE('',#50032,#50033); +#50032 = CARTESIAN_POINT('',(0.1,-13.75,1.25)); +#50033 = VECTOR('',#50034,1.); +#50034 = DIRECTION('',(0.,0.,1.)); +#50035 = ORIENTED_EDGE('',*,*,#49989,.T.); +#50036 = ORIENTED_EDGE('',*,*,#47527,.F.); +#50037 = ORIENTED_EDGE('',*,*,#49901,.T.); +#50038 = PLANE('',#50039); +#50039 = AXIS2_PLACEMENT_3D('',#50040,#50041,#50042); +#50040 = CARTESIAN_POINT('',(0.1,-14.,2.448597401424)); +#50041 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50042 = DIRECTION('',(0.,0.,1.)); +#50043 = ADVANCED_FACE('',(#50044),#50055,.T.); +#50044 = FACE_BOUND('',#50045,.T.); +#50045 = EDGE_LOOP('',(#50046,#50047,#50048,#50054)); +#50046 = ORIENTED_EDGE('',*,*,#47615,.T.); +#50047 = ORIENTED_EDGE('',*,*,#50006,.T.); +#50048 = ORIENTED_EDGE('',*,*,#50049,.F.); +#50049 = EDGE_CURVE('',#49934,#50007,#50050,.T.); +#50050 = LINE('',#50051,#50052); +#50051 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#50052 = VECTOR('',#50053,1.); +#50053 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50054 = ORIENTED_EDGE('',*,*,#49933,.F.); +#50055 = PLANE('',#50056); +#50056 = AXIS2_PLACEMENT_3D('',#50057,#50058,#50059); +#50057 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#50058 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50059 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50060 = ADVANCED_FACE('',(#50061),#50072,.T.); +#50061 = FACE_BOUND('',#50062,.T.); +#50062 = EDGE_LOOP('',(#50063,#50064,#50065,#50066)); +#50063 = ORIENTED_EDGE('',*,*,#47791,.T.); +#50064 = ORIENTED_EDGE('',*,*,#47654,.T.); +#50065 = ORIENTED_EDGE('',*,*,#47679,.T.); +#50066 = ORIENTED_EDGE('',*,*,#50067,.T.); +#50067 = EDGE_CURVE('',#47680,#47784,#50068,.T.); +#50068 = LINE('',#50069,#50070); +#50069 = CARTESIAN_POINT('',(0.1,-12.,0.9)); +#50070 = VECTOR('',#50071,1.); +#50071 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50072 = PLANE('',#50073); +#50073 = AXIS2_PLACEMENT_3D('',#50074,#50075,#50076); +#50074 = CARTESIAN_POINT('',(-1.304512053935E-15,-12.,0.9)); +#50075 = DIRECTION('',(0.,0.,1.)); +#50076 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50077 = ADVANCED_FACE('',(#50078),#50089,.T.); +#50078 = FACE_BOUND('',#50079,.T.); +#50079 = EDGE_LOOP('',(#50080,#50081,#50087,#50088)); +#50080 = ORIENTED_EDGE('',*,*,#47759,.T.); +#50081 = ORIENTED_EDGE('',*,*,#50082,.F.); +#50082 = EDGE_CURVE('',#47704,#47760,#50083,.T.); +#50083 = LINE('',#50084,#50085); +#50084 = CARTESIAN_POINT('',(-0.1,-12.,0.9)); +#50085 = VECTOR('',#50086,1.); +#50086 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50087 = ORIENTED_EDGE('',*,*,#47711,.T.); +#50088 = ORIENTED_EDGE('',*,*,#47734,.T.); +#50089 = PLANE('',#50090); +#50090 = AXIS2_PLACEMENT_3D('',#50091,#50092,#50093); +#50091 = CARTESIAN_POINT('',(-1.304512053935E-15,-12.,0.9)); +#50092 = DIRECTION('',(0.,0.,1.)); +#50093 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50094 = ADVANCED_FACE('',(#50095),#50138,.T.); +#50095 = FACE_BOUND('',#50096,.T.); +#50096 = EDGE_LOOP('',(#50097,#50098,#50106,#50114,#50122,#50130,#50136, + #50137)); +#50097 = ORIENTED_EDGE('',*,*,#47767,.F.); +#50098 = ORIENTED_EDGE('',*,*,#50099,.T.); +#50099 = EDGE_CURVE('',#47768,#50100,#50102,.T.); +#50100 = VERTEX_POINT('',#50101); +#50101 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#50102 = LINE('',#50103,#50104); +#50103 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#50104 = VECTOR('',#50105,1.); +#50105 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50106 = ORIENTED_EDGE('',*,*,#50107,.T.); +#50107 = EDGE_CURVE('',#50100,#50108,#50110,.T.); +#50108 = VERTEX_POINT('',#50109); +#50109 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#50110 = LINE('',#50111,#50112); +#50111 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#50112 = VECTOR('',#50113,1.); +#50113 = DIRECTION('',(0.,0.,-1.)); +#50114 = ORIENTED_EDGE('',*,*,#50115,.T.); +#50115 = EDGE_CURVE('',#50108,#50116,#50118,.T.); +#50116 = VERTEX_POINT('',#50117); +#50117 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#50118 = LINE('',#50119,#50120); +#50119 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#50120 = VECTOR('',#50121,1.); +#50121 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50122 = ORIENTED_EDGE('',*,*,#50123,.T.); +#50123 = EDGE_CURVE('',#50116,#50124,#50126,.T.); +#50124 = VERTEX_POINT('',#50125); +#50125 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50126 = LINE('',#50127,#50128); +#50127 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#50128 = VECTOR('',#50129,1.); +#50129 = DIRECTION('',(0.,0.,1.)); +#50130 = ORIENTED_EDGE('',*,*,#50131,.T.); +#50131 = EDGE_CURVE('',#50124,#47696,#50132,.T.); +#50132 = LINE('',#50133,#50134); +#50133 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50134 = VECTOR('',#50135,1.); +#50135 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50136 = ORIENTED_EDGE('',*,*,#47703,.F.); +#50137 = ORIENTED_EDGE('',*,*,#50082,.T.); +#50138 = PLANE('',#50139); +#50139 = AXIS2_PLACEMENT_3D('',#50140,#50141,#50142); +#50140 = CARTESIAN_POINT('',(-0.1,-12.,2.448597401424)); +#50141 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50142 = DIRECTION('',(0.,0.,1.)); +#50143 = ADVANCED_FACE('',(#50144),#50162,.T.); +#50144 = FACE_BOUND('',#50145,.T.); +#50145 = EDGE_LOOP('',(#50146,#50154,#50160,#50161)); +#50146 = ORIENTED_EDGE('',*,*,#50147,.T.); +#50147 = EDGE_CURVE('',#50124,#50148,#50150,.T.); +#50148 = VERTEX_POINT('',#50149); +#50149 = CARTESIAN_POINT('',(0.1,-11.75,4.45)); +#50150 = LINE('',#50151,#50152); +#50151 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50152 = VECTOR('',#50153,1.); +#50153 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50154 = ORIENTED_EDGE('',*,*,#50155,.T.); +#50155 = EDGE_CURVE('',#50148,#47688,#50156,.T.); +#50156 = LINE('',#50157,#50158); +#50157 = CARTESIAN_POINT('',(0.1,-11.75,4.45)); +#50158 = VECTOR('',#50159,1.); +#50159 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50160 = ORIENTED_EDGE('',*,*,#47695,.F.); +#50161 = ORIENTED_EDGE('',*,*,#50131,.F.); +#50162 = PLANE('',#50163); +#50163 = AXIS2_PLACEMENT_3D('',#50164,#50165,#50166); +#50164 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50165 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50166 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50167 = ADVANCED_FACE('',(#50168),#50204,.F.); +#50168 = FACE_BOUND('',#50169,.F.); +#50169 = EDGE_LOOP('',(#50170,#50171,#50179,#50187,#50195,#50201,#50202, + #50203)); +#50170 = ORIENTED_EDGE('',*,*,#47783,.F.); +#50171 = ORIENTED_EDGE('',*,*,#50172,.T.); +#50172 = EDGE_CURVE('',#47776,#50173,#50175,.T.); +#50173 = VERTEX_POINT('',#50174); +#50174 = CARTESIAN_POINT('',(0.1,-12.25,4.45)); +#50175 = LINE('',#50176,#50177); +#50176 = CARTESIAN_POINT('',(0.1,-12.3,4.5)); +#50177 = VECTOR('',#50178,1.); +#50178 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50179 = ORIENTED_EDGE('',*,*,#50180,.T.); +#50180 = EDGE_CURVE('',#50173,#50181,#50183,.T.); +#50181 = VERTEX_POINT('',#50182); +#50182 = CARTESIAN_POINT('',(0.1,-12.25,1.25)); +#50183 = LINE('',#50184,#50185); +#50184 = CARTESIAN_POINT('',(0.1,-12.25,4.45)); +#50185 = VECTOR('',#50186,1.); +#50186 = DIRECTION('',(0.,0.,-1.)); +#50187 = ORIENTED_EDGE('',*,*,#50188,.T.); +#50188 = EDGE_CURVE('',#50181,#50189,#50191,.T.); +#50189 = VERTEX_POINT('',#50190); +#50190 = CARTESIAN_POINT('',(0.1,-11.75,1.25)); +#50191 = LINE('',#50192,#50193); +#50192 = CARTESIAN_POINT('',(0.1,-12.25,1.25)); +#50193 = VECTOR('',#50194,1.); +#50194 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50195 = ORIENTED_EDGE('',*,*,#50196,.T.); +#50196 = EDGE_CURVE('',#50189,#50148,#50197,.T.); +#50197 = LINE('',#50198,#50199); +#50198 = CARTESIAN_POINT('',(0.1,-11.75,1.25)); +#50199 = VECTOR('',#50200,1.); +#50200 = DIRECTION('',(0.,0.,1.)); +#50201 = ORIENTED_EDGE('',*,*,#50155,.T.); +#50202 = ORIENTED_EDGE('',*,*,#47687,.F.); +#50203 = ORIENTED_EDGE('',*,*,#50067,.T.); +#50204 = PLANE('',#50205); +#50205 = AXIS2_PLACEMENT_3D('',#50206,#50207,#50208); +#50206 = CARTESIAN_POINT('',(0.1,-12.,2.448597401424)); +#50207 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50208 = DIRECTION('',(0.,0.,1.)); +#50209 = ADVANCED_FACE('',(#50210),#50221,.T.); +#50210 = FACE_BOUND('',#50211,.T.); +#50211 = EDGE_LOOP('',(#50212,#50213,#50214,#50220)); +#50212 = ORIENTED_EDGE('',*,*,#47775,.T.); +#50213 = ORIENTED_EDGE('',*,*,#50172,.T.); +#50214 = ORIENTED_EDGE('',*,*,#50215,.F.); +#50215 = EDGE_CURVE('',#50100,#50173,#50216,.T.); +#50216 = LINE('',#50217,#50218); +#50217 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#50218 = VECTOR('',#50219,1.); +#50219 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50220 = ORIENTED_EDGE('',*,*,#50099,.F.); +#50221 = PLANE('',#50222); +#50222 = AXIS2_PLACEMENT_3D('',#50223,#50224,#50225); +#50223 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#50224 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50225 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50226 = ADVANCED_FACE('',(#50227),#50238,.T.); +#50227 = FACE_BOUND('',#50228,.T.); +#50228 = EDGE_LOOP('',(#50229,#50230,#50231,#50232)); +#50229 = ORIENTED_EDGE('',*,*,#47951,.T.); +#50230 = ORIENTED_EDGE('',*,*,#47814,.T.); +#50231 = ORIENTED_EDGE('',*,*,#47839,.T.); +#50232 = ORIENTED_EDGE('',*,*,#50233,.T.); +#50233 = EDGE_CURVE('',#47840,#47944,#50234,.T.); +#50234 = LINE('',#50235,#50236); +#50235 = CARTESIAN_POINT('',(0.1,-10.,0.9)); +#50236 = VECTOR('',#50237,1.); +#50237 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50238 = PLANE('',#50239); +#50239 = AXIS2_PLACEMENT_3D('',#50240,#50241,#50242); +#50240 = CARTESIAN_POINT('',(-1.08246744901E-15,-10.,0.9)); +#50241 = DIRECTION('',(0.,0.,1.)); +#50242 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50243 = ADVANCED_FACE('',(#50244),#50255,.T.); +#50244 = FACE_BOUND('',#50245,.T.); +#50245 = EDGE_LOOP('',(#50246,#50247,#50253,#50254)); +#50246 = ORIENTED_EDGE('',*,*,#47919,.T.); +#50247 = ORIENTED_EDGE('',*,*,#50248,.F.); +#50248 = EDGE_CURVE('',#47864,#47920,#50249,.T.); +#50249 = LINE('',#50250,#50251); +#50250 = CARTESIAN_POINT('',(-0.1,-10.,0.9)); +#50251 = VECTOR('',#50252,1.); +#50252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50253 = ORIENTED_EDGE('',*,*,#47871,.T.); +#50254 = ORIENTED_EDGE('',*,*,#47894,.T.); +#50255 = PLANE('',#50256); +#50256 = AXIS2_PLACEMENT_3D('',#50257,#50258,#50259); +#50257 = CARTESIAN_POINT('',(-1.08246744901E-15,-10.,0.9)); +#50258 = DIRECTION('',(0.,0.,1.)); +#50259 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50260 = ADVANCED_FACE('',(#50261),#50304,.T.); +#50261 = FACE_BOUND('',#50262,.T.); +#50262 = EDGE_LOOP('',(#50263,#50264,#50272,#50280,#50288,#50296,#50302, + #50303)); +#50263 = ORIENTED_EDGE('',*,*,#47927,.F.); +#50264 = ORIENTED_EDGE('',*,*,#50265,.T.); +#50265 = EDGE_CURVE('',#47928,#50266,#50268,.T.); +#50266 = VERTEX_POINT('',#50267); +#50267 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#50268 = LINE('',#50269,#50270); +#50269 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#50270 = VECTOR('',#50271,1.); +#50271 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50272 = ORIENTED_EDGE('',*,*,#50273,.T.); +#50273 = EDGE_CURVE('',#50266,#50274,#50276,.T.); +#50274 = VERTEX_POINT('',#50275); +#50275 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#50276 = LINE('',#50277,#50278); +#50277 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#50278 = VECTOR('',#50279,1.); +#50279 = DIRECTION('',(0.,0.,-1.)); +#50280 = ORIENTED_EDGE('',*,*,#50281,.T.); +#50281 = EDGE_CURVE('',#50274,#50282,#50284,.T.); +#50282 = VERTEX_POINT('',#50283); +#50283 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#50284 = LINE('',#50285,#50286); +#50285 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#50286 = VECTOR('',#50287,1.); +#50287 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50288 = ORIENTED_EDGE('',*,*,#50289,.T.); +#50289 = EDGE_CURVE('',#50282,#50290,#50292,.T.); +#50290 = VERTEX_POINT('',#50291); +#50291 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50292 = LINE('',#50293,#50294); +#50293 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#50294 = VECTOR('',#50295,1.); +#50295 = DIRECTION('',(0.,0.,1.)); +#50296 = ORIENTED_EDGE('',*,*,#50297,.T.); +#50297 = EDGE_CURVE('',#50290,#47856,#50298,.T.); +#50298 = LINE('',#50299,#50300); +#50299 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50300 = VECTOR('',#50301,1.); +#50301 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50302 = ORIENTED_EDGE('',*,*,#47863,.F.); +#50303 = ORIENTED_EDGE('',*,*,#50248,.T.); +#50304 = PLANE('',#50305); +#50305 = AXIS2_PLACEMENT_3D('',#50306,#50307,#50308); +#50306 = CARTESIAN_POINT('',(-0.1,-10.,2.448597401424)); +#50307 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50308 = DIRECTION('',(0.,0.,1.)); +#50309 = ADVANCED_FACE('',(#50310),#50328,.T.); +#50310 = FACE_BOUND('',#50311,.T.); +#50311 = EDGE_LOOP('',(#50312,#50320,#50326,#50327)); +#50312 = ORIENTED_EDGE('',*,*,#50313,.T.); +#50313 = EDGE_CURVE('',#50290,#50314,#50316,.T.); +#50314 = VERTEX_POINT('',#50315); +#50315 = CARTESIAN_POINT('',(0.1,-9.75,4.45)); +#50316 = LINE('',#50317,#50318); +#50317 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50318 = VECTOR('',#50319,1.); +#50319 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50320 = ORIENTED_EDGE('',*,*,#50321,.T.); +#50321 = EDGE_CURVE('',#50314,#47848,#50322,.T.); +#50322 = LINE('',#50323,#50324); +#50323 = CARTESIAN_POINT('',(0.1,-9.75,4.45)); +#50324 = VECTOR('',#50325,1.); +#50325 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50326 = ORIENTED_EDGE('',*,*,#47855,.F.); +#50327 = ORIENTED_EDGE('',*,*,#50297,.F.); +#50328 = PLANE('',#50329); +#50329 = AXIS2_PLACEMENT_3D('',#50330,#50331,#50332); +#50330 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50331 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50332 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50333 = ADVANCED_FACE('',(#50334),#50370,.F.); +#50334 = FACE_BOUND('',#50335,.F.); +#50335 = EDGE_LOOP('',(#50336,#50337,#50345,#50353,#50361,#50367,#50368, + #50369)); +#50336 = ORIENTED_EDGE('',*,*,#47943,.F.); +#50337 = ORIENTED_EDGE('',*,*,#50338,.T.); +#50338 = EDGE_CURVE('',#47936,#50339,#50341,.T.); +#50339 = VERTEX_POINT('',#50340); +#50340 = CARTESIAN_POINT('',(0.1,-10.25,4.45)); +#50341 = LINE('',#50342,#50343); +#50342 = CARTESIAN_POINT('',(0.1,-10.3,4.5)); +#50343 = VECTOR('',#50344,1.); +#50344 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50345 = ORIENTED_EDGE('',*,*,#50346,.T.); +#50346 = EDGE_CURVE('',#50339,#50347,#50349,.T.); +#50347 = VERTEX_POINT('',#50348); +#50348 = CARTESIAN_POINT('',(0.1,-10.25,1.25)); +#50349 = LINE('',#50350,#50351); +#50350 = CARTESIAN_POINT('',(0.1,-10.25,4.45)); +#50351 = VECTOR('',#50352,1.); +#50352 = DIRECTION('',(0.,0.,-1.)); +#50353 = ORIENTED_EDGE('',*,*,#50354,.T.); +#50354 = EDGE_CURVE('',#50347,#50355,#50357,.T.); +#50355 = VERTEX_POINT('',#50356); +#50356 = CARTESIAN_POINT('',(0.1,-9.75,1.25)); +#50357 = LINE('',#50358,#50359); +#50358 = CARTESIAN_POINT('',(0.1,-10.25,1.25)); +#50359 = VECTOR('',#50360,1.); +#50360 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50361 = ORIENTED_EDGE('',*,*,#50362,.T.); +#50362 = EDGE_CURVE('',#50355,#50314,#50363,.T.); +#50363 = LINE('',#50364,#50365); +#50364 = CARTESIAN_POINT('',(0.1,-9.75,1.25)); +#50365 = VECTOR('',#50366,1.); +#50366 = DIRECTION('',(0.,0.,1.)); +#50367 = ORIENTED_EDGE('',*,*,#50321,.T.); +#50368 = ORIENTED_EDGE('',*,*,#47847,.F.); +#50369 = ORIENTED_EDGE('',*,*,#50233,.T.); +#50370 = PLANE('',#50371); +#50371 = AXIS2_PLACEMENT_3D('',#50372,#50373,#50374); +#50372 = CARTESIAN_POINT('',(0.1,-10.,2.448597401424)); +#50373 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50374 = DIRECTION('',(0.,0.,1.)); +#50375 = ADVANCED_FACE('',(#50376),#50387,.T.); +#50376 = FACE_BOUND('',#50377,.T.); +#50377 = EDGE_LOOP('',(#50378,#50379,#50380,#50386)); +#50378 = ORIENTED_EDGE('',*,*,#47935,.T.); +#50379 = ORIENTED_EDGE('',*,*,#50338,.T.); +#50380 = ORIENTED_EDGE('',*,*,#50381,.F.); +#50381 = EDGE_CURVE('',#50266,#50339,#50382,.T.); +#50382 = LINE('',#50383,#50384); +#50383 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#50384 = VECTOR('',#50385,1.); +#50385 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50386 = ORIENTED_EDGE('',*,*,#50265,.F.); +#50387 = PLANE('',#50388); +#50388 = AXIS2_PLACEMENT_3D('',#50389,#50390,#50391); +#50389 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#50390 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50391 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50392 = ADVANCED_FACE('',(#50393),#50404,.T.); +#50393 = FACE_BOUND('',#50394,.T.); +#50394 = EDGE_LOOP('',(#50395,#50396,#50397,#50398)); +#50395 = ORIENTED_EDGE('',*,*,#48111,.T.); +#50396 = ORIENTED_EDGE('',*,*,#47974,.T.); +#50397 = ORIENTED_EDGE('',*,*,#47999,.T.); +#50398 = ORIENTED_EDGE('',*,*,#50399,.T.); +#50399 = EDGE_CURVE('',#48000,#48104,#50400,.T.); +#50400 = LINE('',#50401,#50402); +#50401 = CARTESIAN_POINT('',(0.1,-8.,0.9)); +#50402 = VECTOR('',#50403,1.); +#50403 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50404 = PLANE('',#50405); +#50405 = AXIS2_PLACEMENT_3D('',#50406,#50407,#50408); +#50406 = CARTESIAN_POINT('',(-8.604228440845E-16,-8.,0.9)); +#50407 = DIRECTION('',(0.,0.,1.)); +#50408 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50409 = ADVANCED_FACE('',(#50410),#50421,.T.); +#50410 = FACE_BOUND('',#50411,.T.); +#50411 = EDGE_LOOP('',(#50412,#50413,#50419,#50420)); +#50412 = ORIENTED_EDGE('',*,*,#48079,.T.); +#50413 = ORIENTED_EDGE('',*,*,#50414,.F.); +#50414 = EDGE_CURVE('',#48024,#48080,#50415,.T.); +#50415 = LINE('',#50416,#50417); +#50416 = CARTESIAN_POINT('',(-0.1,-8.,0.9)); +#50417 = VECTOR('',#50418,1.); +#50418 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50419 = ORIENTED_EDGE('',*,*,#48031,.T.); +#50420 = ORIENTED_EDGE('',*,*,#48054,.T.); +#50421 = PLANE('',#50422); +#50422 = AXIS2_PLACEMENT_3D('',#50423,#50424,#50425); +#50423 = CARTESIAN_POINT('',(-8.604228440845E-16,-8.,0.9)); +#50424 = DIRECTION('',(0.,0.,1.)); +#50425 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50426 = ADVANCED_FACE('',(#50427),#50470,.T.); +#50427 = FACE_BOUND('',#50428,.T.); +#50428 = EDGE_LOOP('',(#50429,#50430,#50438,#50446,#50454,#50462,#50468, + #50469)); +#50429 = ORIENTED_EDGE('',*,*,#48087,.F.); +#50430 = ORIENTED_EDGE('',*,*,#50431,.T.); +#50431 = EDGE_CURVE('',#48088,#50432,#50434,.T.); +#50432 = VERTEX_POINT('',#50433); +#50433 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#50434 = LINE('',#50435,#50436); +#50435 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#50436 = VECTOR('',#50437,1.); +#50437 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50438 = ORIENTED_EDGE('',*,*,#50439,.T.); +#50439 = EDGE_CURVE('',#50432,#50440,#50442,.T.); +#50440 = VERTEX_POINT('',#50441); +#50441 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#50442 = LINE('',#50443,#50444); +#50443 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#50444 = VECTOR('',#50445,1.); +#50445 = DIRECTION('',(0.,0.,-1.)); +#50446 = ORIENTED_EDGE('',*,*,#50447,.T.); +#50447 = EDGE_CURVE('',#50440,#50448,#50450,.T.); +#50448 = VERTEX_POINT('',#50449); +#50449 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#50450 = LINE('',#50451,#50452); +#50451 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#50452 = VECTOR('',#50453,1.); +#50453 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50454 = ORIENTED_EDGE('',*,*,#50455,.T.); +#50455 = EDGE_CURVE('',#50448,#50456,#50458,.T.); +#50456 = VERTEX_POINT('',#50457); +#50457 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50458 = LINE('',#50459,#50460); +#50459 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#50460 = VECTOR('',#50461,1.); +#50461 = DIRECTION('',(0.,0.,1.)); +#50462 = ORIENTED_EDGE('',*,*,#50463,.T.); +#50463 = EDGE_CURVE('',#50456,#48016,#50464,.T.); +#50464 = LINE('',#50465,#50466); +#50465 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50466 = VECTOR('',#50467,1.); +#50467 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50468 = ORIENTED_EDGE('',*,*,#48023,.F.); +#50469 = ORIENTED_EDGE('',*,*,#50414,.T.); +#50470 = PLANE('',#50471); +#50471 = AXIS2_PLACEMENT_3D('',#50472,#50473,#50474); +#50472 = CARTESIAN_POINT('',(-0.1,-8.,2.448597401424)); +#50473 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50474 = DIRECTION('',(0.,0.,1.)); +#50475 = ADVANCED_FACE('',(#50476),#50494,.T.); +#50476 = FACE_BOUND('',#50477,.T.); +#50477 = EDGE_LOOP('',(#50478,#50486,#50492,#50493)); +#50478 = ORIENTED_EDGE('',*,*,#50479,.T.); +#50479 = EDGE_CURVE('',#50456,#50480,#50482,.T.); +#50480 = VERTEX_POINT('',#50481); +#50481 = CARTESIAN_POINT('',(0.1,-7.75,4.45)); +#50482 = LINE('',#50483,#50484); +#50483 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50484 = VECTOR('',#50485,1.); +#50485 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50486 = ORIENTED_EDGE('',*,*,#50487,.T.); +#50487 = EDGE_CURVE('',#50480,#48008,#50488,.T.); +#50488 = LINE('',#50489,#50490); +#50489 = CARTESIAN_POINT('',(0.1,-7.75,4.45)); +#50490 = VECTOR('',#50491,1.); +#50491 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50492 = ORIENTED_EDGE('',*,*,#48015,.F.); +#50493 = ORIENTED_EDGE('',*,*,#50463,.F.); +#50494 = PLANE('',#50495); +#50495 = AXIS2_PLACEMENT_3D('',#50496,#50497,#50498); +#50496 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50497 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50498 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50499 = ADVANCED_FACE('',(#50500),#50536,.F.); +#50500 = FACE_BOUND('',#50501,.F.); +#50501 = EDGE_LOOP('',(#50502,#50503,#50511,#50519,#50527,#50533,#50534, + #50535)); +#50502 = ORIENTED_EDGE('',*,*,#48103,.F.); +#50503 = ORIENTED_EDGE('',*,*,#50504,.T.); +#50504 = EDGE_CURVE('',#48096,#50505,#50507,.T.); +#50505 = VERTEX_POINT('',#50506); +#50506 = CARTESIAN_POINT('',(0.1,-8.25,4.45)); +#50507 = LINE('',#50508,#50509); +#50508 = CARTESIAN_POINT('',(0.1,-8.3,4.5)); +#50509 = VECTOR('',#50510,1.); +#50510 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50511 = ORIENTED_EDGE('',*,*,#50512,.T.); +#50512 = EDGE_CURVE('',#50505,#50513,#50515,.T.); +#50513 = VERTEX_POINT('',#50514); +#50514 = CARTESIAN_POINT('',(0.1,-8.25,1.25)); +#50515 = LINE('',#50516,#50517); +#50516 = CARTESIAN_POINT('',(0.1,-8.25,4.45)); +#50517 = VECTOR('',#50518,1.); +#50518 = DIRECTION('',(0.,0.,-1.)); +#50519 = ORIENTED_EDGE('',*,*,#50520,.T.); +#50520 = EDGE_CURVE('',#50513,#50521,#50523,.T.); +#50521 = VERTEX_POINT('',#50522); +#50522 = CARTESIAN_POINT('',(0.1,-7.75,1.25)); +#50523 = LINE('',#50524,#50525); +#50524 = CARTESIAN_POINT('',(0.1,-8.25,1.25)); +#50525 = VECTOR('',#50526,1.); +#50526 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50527 = ORIENTED_EDGE('',*,*,#50528,.T.); +#50528 = EDGE_CURVE('',#50521,#50480,#50529,.T.); +#50529 = LINE('',#50530,#50531); +#50530 = CARTESIAN_POINT('',(0.1,-7.75,1.25)); +#50531 = VECTOR('',#50532,1.); +#50532 = DIRECTION('',(0.,0.,1.)); +#50533 = ORIENTED_EDGE('',*,*,#50487,.T.); +#50534 = ORIENTED_EDGE('',*,*,#48007,.F.); +#50535 = ORIENTED_EDGE('',*,*,#50399,.T.); +#50536 = PLANE('',#50537); +#50537 = AXIS2_PLACEMENT_3D('',#50538,#50539,#50540); +#50538 = CARTESIAN_POINT('',(0.1,-8.,2.448597401424)); +#50539 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50540 = DIRECTION('',(0.,0.,1.)); +#50541 = ADVANCED_FACE('',(#50542),#50553,.T.); +#50542 = FACE_BOUND('',#50543,.T.); +#50543 = EDGE_LOOP('',(#50544,#50545,#50546,#50552)); +#50544 = ORIENTED_EDGE('',*,*,#48095,.T.); +#50545 = ORIENTED_EDGE('',*,*,#50504,.T.); +#50546 = ORIENTED_EDGE('',*,*,#50547,.F.); +#50547 = EDGE_CURVE('',#50432,#50505,#50548,.T.); +#50548 = LINE('',#50549,#50550); +#50549 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#50550 = VECTOR('',#50551,1.); +#50551 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50552 = ORIENTED_EDGE('',*,*,#50431,.F.); +#50553 = PLANE('',#50554); +#50554 = AXIS2_PLACEMENT_3D('',#50555,#50556,#50557); +#50555 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#50556 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50557 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50558 = ADVANCED_FACE('',(#50559),#50570,.T.); +#50559 = FACE_BOUND('',#50560,.T.); +#50560 = EDGE_LOOP('',(#50561,#50562,#50563,#50564)); +#50561 = ORIENTED_EDGE('',*,*,#48271,.T.); +#50562 = ORIENTED_EDGE('',*,*,#48134,.T.); +#50563 = ORIENTED_EDGE('',*,*,#48159,.T.); +#50564 = ORIENTED_EDGE('',*,*,#50565,.T.); +#50565 = EDGE_CURVE('',#48160,#48264,#50566,.T.); +#50566 = LINE('',#50567,#50568); +#50567 = CARTESIAN_POINT('',(0.1,-6.,0.9)); +#50568 = VECTOR('',#50569,1.); +#50569 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50570 = PLANE('',#50571); +#50571 = AXIS2_PLACEMENT_3D('',#50572,#50573,#50574); +#50572 = CARTESIAN_POINT('',(-6.383782391595E-16,-6.,0.9)); +#50573 = DIRECTION('',(0.,0.,1.)); +#50574 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50575 = ADVANCED_FACE('',(#50576),#50587,.T.); +#50576 = FACE_BOUND('',#50577,.T.); +#50577 = EDGE_LOOP('',(#50578,#50579,#50585,#50586)); +#50578 = ORIENTED_EDGE('',*,*,#48239,.T.); +#50579 = ORIENTED_EDGE('',*,*,#50580,.F.); +#50580 = EDGE_CURVE('',#48184,#48240,#50581,.T.); +#50581 = LINE('',#50582,#50583); +#50582 = CARTESIAN_POINT('',(-0.1,-6.,0.9)); +#50583 = VECTOR('',#50584,1.); +#50584 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50585 = ORIENTED_EDGE('',*,*,#48191,.T.); +#50586 = ORIENTED_EDGE('',*,*,#48214,.T.); +#50587 = PLANE('',#50588); +#50588 = AXIS2_PLACEMENT_3D('',#50589,#50590,#50591); +#50589 = CARTESIAN_POINT('',(-6.383782391595E-16,-6.,0.9)); +#50590 = DIRECTION('',(0.,0.,1.)); +#50591 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50592 = ADVANCED_FACE('',(#50593),#50636,.T.); +#50593 = FACE_BOUND('',#50594,.T.); +#50594 = EDGE_LOOP('',(#50595,#50596,#50604,#50612,#50620,#50628,#50634, + #50635)); +#50595 = ORIENTED_EDGE('',*,*,#48247,.F.); +#50596 = ORIENTED_EDGE('',*,*,#50597,.T.); +#50597 = EDGE_CURVE('',#48248,#50598,#50600,.T.); +#50598 = VERTEX_POINT('',#50599); +#50599 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#50600 = LINE('',#50601,#50602); +#50601 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#50602 = VECTOR('',#50603,1.); +#50603 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50604 = ORIENTED_EDGE('',*,*,#50605,.T.); +#50605 = EDGE_CURVE('',#50598,#50606,#50608,.T.); +#50606 = VERTEX_POINT('',#50607); +#50607 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#50608 = LINE('',#50609,#50610); +#50609 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#50610 = VECTOR('',#50611,1.); +#50611 = DIRECTION('',(0.,0.,-1.)); +#50612 = ORIENTED_EDGE('',*,*,#50613,.T.); +#50613 = EDGE_CURVE('',#50606,#50614,#50616,.T.); +#50614 = VERTEX_POINT('',#50615); +#50615 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#50616 = LINE('',#50617,#50618); +#50617 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#50618 = VECTOR('',#50619,1.); +#50619 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50620 = ORIENTED_EDGE('',*,*,#50621,.T.); +#50621 = EDGE_CURVE('',#50614,#50622,#50624,.T.); +#50622 = VERTEX_POINT('',#50623); +#50623 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50624 = LINE('',#50625,#50626); +#50625 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#50626 = VECTOR('',#50627,1.); +#50627 = DIRECTION('',(0.,0.,1.)); +#50628 = ORIENTED_EDGE('',*,*,#50629,.T.); +#50629 = EDGE_CURVE('',#50622,#48176,#50630,.T.); +#50630 = LINE('',#50631,#50632); +#50631 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50632 = VECTOR('',#50633,1.); +#50633 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50634 = ORIENTED_EDGE('',*,*,#48183,.F.); +#50635 = ORIENTED_EDGE('',*,*,#50580,.T.); +#50636 = PLANE('',#50637); +#50637 = AXIS2_PLACEMENT_3D('',#50638,#50639,#50640); +#50638 = CARTESIAN_POINT('',(-0.1,-6.,2.448597401424)); +#50639 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50640 = DIRECTION('',(0.,0.,1.)); +#50641 = ADVANCED_FACE('',(#50642),#50660,.T.); +#50642 = FACE_BOUND('',#50643,.T.); +#50643 = EDGE_LOOP('',(#50644,#50652,#50658,#50659)); +#50644 = ORIENTED_EDGE('',*,*,#50645,.T.); +#50645 = EDGE_CURVE('',#50622,#50646,#50648,.T.); +#50646 = VERTEX_POINT('',#50647); +#50647 = CARTESIAN_POINT('',(0.1,-5.75,4.45)); +#50648 = LINE('',#50649,#50650); +#50649 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50650 = VECTOR('',#50651,1.); +#50651 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50652 = ORIENTED_EDGE('',*,*,#50653,.T.); +#50653 = EDGE_CURVE('',#50646,#48168,#50654,.T.); +#50654 = LINE('',#50655,#50656); +#50655 = CARTESIAN_POINT('',(0.1,-5.75,4.45)); +#50656 = VECTOR('',#50657,1.); +#50657 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50658 = ORIENTED_EDGE('',*,*,#48175,.F.); +#50659 = ORIENTED_EDGE('',*,*,#50629,.F.); +#50660 = PLANE('',#50661); +#50661 = AXIS2_PLACEMENT_3D('',#50662,#50663,#50664); +#50662 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50663 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50664 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50665 = ADVANCED_FACE('',(#50666),#50702,.F.); +#50666 = FACE_BOUND('',#50667,.F.); +#50667 = EDGE_LOOP('',(#50668,#50669,#50677,#50685,#50693,#50699,#50700, + #50701)); +#50668 = ORIENTED_EDGE('',*,*,#48263,.F.); +#50669 = ORIENTED_EDGE('',*,*,#50670,.T.); +#50670 = EDGE_CURVE('',#48256,#50671,#50673,.T.); +#50671 = VERTEX_POINT('',#50672); +#50672 = CARTESIAN_POINT('',(0.1,-6.25,4.45)); +#50673 = LINE('',#50674,#50675); +#50674 = CARTESIAN_POINT('',(0.1,-6.3,4.5)); +#50675 = VECTOR('',#50676,1.); +#50676 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50677 = ORIENTED_EDGE('',*,*,#50678,.T.); +#50678 = EDGE_CURVE('',#50671,#50679,#50681,.T.); +#50679 = VERTEX_POINT('',#50680); +#50680 = CARTESIAN_POINT('',(0.1,-6.25,1.25)); +#50681 = LINE('',#50682,#50683); +#50682 = CARTESIAN_POINT('',(0.1,-6.25,4.45)); +#50683 = VECTOR('',#50684,1.); +#50684 = DIRECTION('',(0.,0.,-1.)); +#50685 = ORIENTED_EDGE('',*,*,#50686,.T.); +#50686 = EDGE_CURVE('',#50679,#50687,#50689,.T.); +#50687 = VERTEX_POINT('',#50688); +#50688 = CARTESIAN_POINT('',(0.1,-5.75,1.25)); +#50689 = LINE('',#50690,#50691); +#50690 = CARTESIAN_POINT('',(0.1,-6.25,1.25)); +#50691 = VECTOR('',#50692,1.); +#50692 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50693 = ORIENTED_EDGE('',*,*,#50694,.T.); +#50694 = EDGE_CURVE('',#50687,#50646,#50695,.T.); +#50695 = LINE('',#50696,#50697); +#50696 = CARTESIAN_POINT('',(0.1,-5.75,1.25)); +#50697 = VECTOR('',#50698,1.); +#50698 = DIRECTION('',(0.,0.,1.)); +#50699 = ORIENTED_EDGE('',*,*,#50653,.T.); +#50700 = ORIENTED_EDGE('',*,*,#48167,.F.); +#50701 = ORIENTED_EDGE('',*,*,#50565,.T.); +#50702 = PLANE('',#50703); +#50703 = AXIS2_PLACEMENT_3D('',#50704,#50705,#50706); +#50704 = CARTESIAN_POINT('',(0.1,-6.,2.448597401424)); +#50705 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50706 = DIRECTION('',(0.,0.,1.)); +#50707 = ADVANCED_FACE('',(#50708),#50719,.T.); +#50708 = FACE_BOUND('',#50709,.T.); +#50709 = EDGE_LOOP('',(#50710,#50711,#50712,#50718)); +#50710 = ORIENTED_EDGE('',*,*,#48255,.T.); +#50711 = ORIENTED_EDGE('',*,*,#50670,.T.); +#50712 = ORIENTED_EDGE('',*,*,#50713,.F.); +#50713 = EDGE_CURVE('',#50598,#50671,#50714,.T.); +#50714 = LINE('',#50715,#50716); +#50715 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#50716 = VECTOR('',#50717,1.); +#50717 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50718 = ORIENTED_EDGE('',*,*,#50597,.F.); +#50719 = PLANE('',#50720); +#50720 = AXIS2_PLACEMENT_3D('',#50721,#50722,#50723); +#50721 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#50722 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50723 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50724 = ADVANCED_FACE('',(#50725),#50736,.T.); +#50725 = FACE_BOUND('',#50726,.T.); +#50726 = EDGE_LOOP('',(#50727,#50728,#50729,#50730)); +#50727 = ORIENTED_EDGE('',*,*,#48431,.T.); +#50728 = ORIENTED_EDGE('',*,*,#48294,.T.); +#50729 = ORIENTED_EDGE('',*,*,#48319,.T.); +#50730 = ORIENTED_EDGE('',*,*,#50731,.T.); +#50731 = EDGE_CURVE('',#48320,#48424,#50732,.T.); +#50732 = LINE('',#50733,#50734); +#50733 = CARTESIAN_POINT('',(0.1,-4.,0.9)); +#50734 = VECTOR('',#50735,1.); +#50735 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50736 = PLANE('',#50737); +#50737 = AXIS2_PLACEMENT_3D('',#50738,#50739,#50740); +#50738 = CARTESIAN_POINT('',(-4.163336342344E-16,-4.,0.9)); +#50739 = DIRECTION('',(0.,0.,1.)); +#50740 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50741 = ADVANCED_FACE('',(#50742),#50753,.T.); +#50742 = FACE_BOUND('',#50743,.T.); +#50743 = EDGE_LOOP('',(#50744,#50745,#50751,#50752)); +#50744 = ORIENTED_EDGE('',*,*,#48399,.T.); +#50745 = ORIENTED_EDGE('',*,*,#50746,.F.); +#50746 = EDGE_CURVE('',#48344,#48400,#50747,.T.); +#50747 = LINE('',#50748,#50749); +#50748 = CARTESIAN_POINT('',(-0.1,-4.,0.9)); +#50749 = VECTOR('',#50750,1.); +#50750 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50751 = ORIENTED_EDGE('',*,*,#48351,.T.); +#50752 = ORIENTED_EDGE('',*,*,#48374,.T.); +#50753 = PLANE('',#50754); +#50754 = AXIS2_PLACEMENT_3D('',#50755,#50756,#50757); +#50755 = CARTESIAN_POINT('',(-4.163336342344E-16,-4.,0.9)); +#50756 = DIRECTION('',(0.,0.,1.)); +#50757 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50758 = ADVANCED_FACE('',(#50759),#50802,.T.); +#50759 = FACE_BOUND('',#50760,.T.); +#50760 = EDGE_LOOP('',(#50761,#50762,#50770,#50778,#50786,#50794,#50800, + #50801)); +#50761 = ORIENTED_EDGE('',*,*,#48407,.F.); +#50762 = ORIENTED_EDGE('',*,*,#50763,.T.); +#50763 = EDGE_CURVE('',#48408,#50764,#50766,.T.); +#50764 = VERTEX_POINT('',#50765); +#50765 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#50766 = LINE('',#50767,#50768); +#50767 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#50768 = VECTOR('',#50769,1.); +#50769 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50770 = ORIENTED_EDGE('',*,*,#50771,.T.); +#50771 = EDGE_CURVE('',#50764,#50772,#50774,.T.); +#50772 = VERTEX_POINT('',#50773); +#50773 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#50774 = LINE('',#50775,#50776); +#50775 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#50776 = VECTOR('',#50777,1.); +#50777 = DIRECTION('',(0.,0.,-1.)); +#50778 = ORIENTED_EDGE('',*,*,#50779,.T.); +#50779 = EDGE_CURVE('',#50772,#50780,#50782,.T.); +#50780 = VERTEX_POINT('',#50781); +#50781 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#50782 = LINE('',#50783,#50784); +#50783 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#50784 = VECTOR('',#50785,1.); +#50785 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50786 = ORIENTED_EDGE('',*,*,#50787,.T.); +#50787 = EDGE_CURVE('',#50780,#50788,#50790,.T.); +#50788 = VERTEX_POINT('',#50789); +#50789 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50790 = LINE('',#50791,#50792); +#50791 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#50792 = VECTOR('',#50793,1.); +#50793 = DIRECTION('',(0.,0.,1.)); +#50794 = ORIENTED_EDGE('',*,*,#50795,.T.); +#50795 = EDGE_CURVE('',#50788,#48336,#50796,.T.); +#50796 = LINE('',#50797,#50798); +#50797 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50798 = VECTOR('',#50799,1.); +#50799 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50800 = ORIENTED_EDGE('',*,*,#48343,.F.); +#50801 = ORIENTED_EDGE('',*,*,#50746,.T.); +#50802 = PLANE('',#50803); +#50803 = AXIS2_PLACEMENT_3D('',#50804,#50805,#50806); +#50804 = CARTESIAN_POINT('',(-0.1,-4.,2.448597401424)); +#50805 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50806 = DIRECTION('',(0.,0.,1.)); +#50807 = ADVANCED_FACE('',(#50808),#50826,.T.); +#50808 = FACE_BOUND('',#50809,.T.); +#50809 = EDGE_LOOP('',(#50810,#50818,#50824,#50825)); +#50810 = ORIENTED_EDGE('',*,*,#50811,.T.); +#50811 = EDGE_CURVE('',#50788,#50812,#50814,.T.); +#50812 = VERTEX_POINT('',#50813); +#50813 = CARTESIAN_POINT('',(0.1,-3.75,4.45)); +#50814 = LINE('',#50815,#50816); +#50815 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50816 = VECTOR('',#50817,1.); +#50817 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50818 = ORIENTED_EDGE('',*,*,#50819,.T.); +#50819 = EDGE_CURVE('',#50812,#48328,#50820,.T.); +#50820 = LINE('',#50821,#50822); +#50821 = CARTESIAN_POINT('',(0.1,-3.75,4.45)); +#50822 = VECTOR('',#50823,1.); +#50823 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50824 = ORIENTED_EDGE('',*,*,#48335,.F.); +#50825 = ORIENTED_EDGE('',*,*,#50795,.F.); +#50826 = PLANE('',#50827); +#50827 = AXIS2_PLACEMENT_3D('',#50828,#50829,#50830); +#50828 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50829 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50830 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50831 = ADVANCED_FACE('',(#50832),#50868,.F.); +#50832 = FACE_BOUND('',#50833,.F.); +#50833 = EDGE_LOOP('',(#50834,#50835,#50843,#50851,#50859,#50865,#50866, + #50867)); +#50834 = ORIENTED_EDGE('',*,*,#48423,.F.); +#50835 = ORIENTED_EDGE('',*,*,#50836,.T.); +#50836 = EDGE_CURVE('',#48416,#50837,#50839,.T.); +#50837 = VERTEX_POINT('',#50838); +#50838 = CARTESIAN_POINT('',(0.1,-4.25,4.45)); +#50839 = LINE('',#50840,#50841); +#50840 = CARTESIAN_POINT('',(0.1,-4.3,4.5)); +#50841 = VECTOR('',#50842,1.); +#50842 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50843 = ORIENTED_EDGE('',*,*,#50844,.T.); +#50844 = EDGE_CURVE('',#50837,#50845,#50847,.T.); +#50845 = VERTEX_POINT('',#50846); +#50846 = CARTESIAN_POINT('',(0.1,-4.25,1.25)); +#50847 = LINE('',#50848,#50849); +#50848 = CARTESIAN_POINT('',(0.1,-4.25,4.45)); +#50849 = VECTOR('',#50850,1.); +#50850 = DIRECTION('',(0.,0.,-1.)); +#50851 = ORIENTED_EDGE('',*,*,#50852,.T.); +#50852 = EDGE_CURVE('',#50845,#50853,#50855,.T.); +#50853 = VERTEX_POINT('',#50854); +#50854 = CARTESIAN_POINT('',(0.1,-3.75,1.25)); +#50855 = LINE('',#50856,#50857); +#50856 = CARTESIAN_POINT('',(0.1,-4.25,1.25)); +#50857 = VECTOR('',#50858,1.); +#50858 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50859 = ORIENTED_EDGE('',*,*,#50860,.T.); +#50860 = EDGE_CURVE('',#50853,#50812,#50861,.T.); +#50861 = LINE('',#50862,#50863); +#50862 = CARTESIAN_POINT('',(0.1,-3.75,1.25)); +#50863 = VECTOR('',#50864,1.); +#50864 = DIRECTION('',(0.,0.,1.)); +#50865 = ORIENTED_EDGE('',*,*,#50819,.T.); +#50866 = ORIENTED_EDGE('',*,*,#48327,.F.); +#50867 = ORIENTED_EDGE('',*,*,#50731,.T.); +#50868 = PLANE('',#50869); +#50869 = AXIS2_PLACEMENT_3D('',#50870,#50871,#50872); +#50870 = CARTESIAN_POINT('',(0.1,-4.,2.448597401424)); +#50871 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50872 = DIRECTION('',(0.,0.,1.)); +#50873 = ADVANCED_FACE('',(#50874),#50885,.T.); +#50874 = FACE_BOUND('',#50875,.T.); +#50875 = EDGE_LOOP('',(#50876,#50877,#50878,#50884)); +#50876 = ORIENTED_EDGE('',*,*,#48415,.T.); +#50877 = ORIENTED_EDGE('',*,*,#50836,.T.); +#50878 = ORIENTED_EDGE('',*,*,#50879,.F.); +#50879 = EDGE_CURVE('',#50764,#50837,#50880,.T.); +#50880 = LINE('',#50881,#50882); +#50881 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#50882 = VECTOR('',#50883,1.); +#50883 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50884 = ORIENTED_EDGE('',*,*,#50763,.F.); +#50885 = PLANE('',#50886); +#50886 = AXIS2_PLACEMENT_3D('',#50887,#50888,#50889); +#50887 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#50888 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50889 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50890 = ADVANCED_FACE('',(#50891),#50902,.T.); +#50891 = FACE_BOUND('',#50892,.T.); +#50892 = EDGE_LOOP('',(#50893,#50894,#50895,#50896)); +#50893 = ORIENTED_EDGE('',*,*,#48591,.T.); +#50894 = ORIENTED_EDGE('',*,*,#48454,.T.); +#50895 = ORIENTED_EDGE('',*,*,#48479,.T.); +#50896 = ORIENTED_EDGE('',*,*,#50897,.T.); +#50897 = EDGE_CURVE('',#48480,#48584,#50898,.T.); +#50898 = LINE('',#50899,#50900); +#50899 = CARTESIAN_POINT('',(0.1,-2.,0.9)); +#50900 = VECTOR('',#50901,1.); +#50901 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50902 = PLANE('',#50903); +#50903 = AXIS2_PLACEMENT_3D('',#50904,#50905,#50906); +#50904 = CARTESIAN_POINT('',(-1.942890293094E-16,-2.,0.9)); +#50905 = DIRECTION('',(0.,0.,1.)); +#50906 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50907 = ADVANCED_FACE('',(#50908),#50919,.T.); +#50908 = FACE_BOUND('',#50909,.T.); +#50909 = EDGE_LOOP('',(#50910,#50911,#50917,#50918)); +#50910 = ORIENTED_EDGE('',*,*,#48559,.T.); +#50911 = ORIENTED_EDGE('',*,*,#50912,.F.); +#50912 = EDGE_CURVE('',#48504,#48560,#50913,.T.); +#50913 = LINE('',#50914,#50915); +#50914 = CARTESIAN_POINT('',(-0.1,-2.,0.9)); +#50915 = VECTOR('',#50916,1.); +#50916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50917 = ORIENTED_EDGE('',*,*,#48511,.T.); +#50918 = ORIENTED_EDGE('',*,*,#48534,.T.); +#50919 = PLANE('',#50920); +#50920 = AXIS2_PLACEMENT_3D('',#50921,#50922,#50923); +#50921 = CARTESIAN_POINT('',(-1.942890293094E-16,-2.,0.9)); +#50922 = DIRECTION('',(0.,0.,1.)); +#50923 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50924 = ADVANCED_FACE('',(#50925),#50968,.T.); +#50925 = FACE_BOUND('',#50926,.T.); +#50926 = EDGE_LOOP('',(#50927,#50928,#50936,#50944,#50952,#50960,#50966, + #50967)); +#50927 = ORIENTED_EDGE('',*,*,#48567,.F.); +#50928 = ORIENTED_EDGE('',*,*,#50929,.T.); +#50929 = EDGE_CURVE('',#48568,#50930,#50932,.T.); +#50930 = VERTEX_POINT('',#50931); +#50931 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#50932 = LINE('',#50933,#50934); +#50933 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#50934 = VECTOR('',#50935,1.); +#50935 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50936 = ORIENTED_EDGE('',*,*,#50937,.T.); +#50937 = EDGE_CURVE('',#50930,#50938,#50940,.T.); +#50938 = VERTEX_POINT('',#50939); +#50939 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#50940 = LINE('',#50941,#50942); +#50941 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#50942 = VECTOR('',#50943,1.); +#50943 = DIRECTION('',(0.,0.,-1.)); +#50944 = ORIENTED_EDGE('',*,*,#50945,.T.); +#50945 = EDGE_CURVE('',#50938,#50946,#50948,.T.); +#50946 = VERTEX_POINT('',#50947); +#50947 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#50948 = LINE('',#50949,#50950); +#50949 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#50950 = VECTOR('',#50951,1.); +#50951 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50952 = ORIENTED_EDGE('',*,*,#50953,.T.); +#50953 = EDGE_CURVE('',#50946,#50954,#50956,.T.); +#50954 = VERTEX_POINT('',#50955); +#50955 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50956 = LINE('',#50957,#50958); +#50957 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#50958 = VECTOR('',#50959,1.); +#50959 = DIRECTION('',(0.,0.,1.)); +#50960 = ORIENTED_EDGE('',*,*,#50961,.T.); +#50961 = EDGE_CURVE('',#50954,#48496,#50962,.T.); +#50962 = LINE('',#50963,#50964); +#50963 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50964 = VECTOR('',#50965,1.); +#50965 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50966 = ORIENTED_EDGE('',*,*,#48503,.F.); +#50967 = ORIENTED_EDGE('',*,*,#50912,.T.); +#50968 = PLANE('',#50969); +#50969 = AXIS2_PLACEMENT_3D('',#50970,#50971,#50972); +#50970 = CARTESIAN_POINT('',(-0.1,-2.,2.448597401424)); +#50971 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50972 = DIRECTION('',(0.,0.,1.)); +#50973 = ADVANCED_FACE('',(#50974),#50992,.T.); +#50974 = FACE_BOUND('',#50975,.T.); +#50975 = EDGE_LOOP('',(#50976,#50984,#50990,#50991)); +#50976 = ORIENTED_EDGE('',*,*,#50977,.T.); +#50977 = EDGE_CURVE('',#50954,#50978,#50980,.T.); +#50978 = VERTEX_POINT('',#50979); +#50979 = CARTESIAN_POINT('',(0.1,-1.75,4.45)); +#50980 = LINE('',#50981,#50982); +#50981 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50982 = VECTOR('',#50983,1.); +#50983 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50984 = ORIENTED_EDGE('',*,*,#50985,.T.); +#50985 = EDGE_CURVE('',#50978,#48488,#50986,.T.); +#50986 = LINE('',#50987,#50988); +#50987 = CARTESIAN_POINT('',(0.1,-1.75,4.45)); +#50988 = VECTOR('',#50989,1.); +#50989 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50990 = ORIENTED_EDGE('',*,*,#48495,.F.); +#50991 = ORIENTED_EDGE('',*,*,#50961,.F.); +#50992 = PLANE('',#50993); +#50993 = AXIS2_PLACEMENT_3D('',#50994,#50995,#50996); +#50994 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50995 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50996 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50997 = ADVANCED_FACE('',(#50998),#51034,.F.); +#50998 = FACE_BOUND('',#50999,.F.); +#50999 = EDGE_LOOP('',(#51000,#51001,#51009,#51017,#51025,#51031,#51032, + #51033)); +#51000 = ORIENTED_EDGE('',*,*,#48583,.F.); +#51001 = ORIENTED_EDGE('',*,*,#51002,.T.); +#51002 = EDGE_CURVE('',#48576,#51003,#51005,.T.); +#51003 = VERTEX_POINT('',#51004); +#51004 = CARTESIAN_POINT('',(0.1,-2.25,4.45)); +#51005 = LINE('',#51006,#51007); +#51006 = CARTESIAN_POINT('',(0.1,-2.3,4.5)); +#51007 = VECTOR('',#51008,1.); +#51008 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51009 = ORIENTED_EDGE('',*,*,#51010,.T.); +#51010 = EDGE_CURVE('',#51003,#51011,#51013,.T.); +#51011 = VERTEX_POINT('',#51012); +#51012 = CARTESIAN_POINT('',(0.1,-2.25,1.25)); +#51013 = LINE('',#51014,#51015); +#51014 = CARTESIAN_POINT('',(0.1,-2.25,4.45)); +#51015 = VECTOR('',#51016,1.); +#51016 = DIRECTION('',(0.,0.,-1.)); +#51017 = ORIENTED_EDGE('',*,*,#51018,.T.); +#51018 = EDGE_CURVE('',#51011,#51019,#51021,.T.); +#51019 = VERTEX_POINT('',#51020); +#51020 = CARTESIAN_POINT('',(0.1,-1.75,1.25)); +#51021 = LINE('',#51022,#51023); +#51022 = CARTESIAN_POINT('',(0.1,-2.25,1.25)); +#51023 = VECTOR('',#51024,1.); +#51024 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51025 = ORIENTED_EDGE('',*,*,#51026,.T.); +#51026 = EDGE_CURVE('',#51019,#50978,#51027,.T.); +#51027 = LINE('',#51028,#51029); +#51028 = CARTESIAN_POINT('',(0.1,-1.75,1.25)); +#51029 = VECTOR('',#51030,1.); +#51030 = DIRECTION('',(0.,0.,1.)); +#51031 = ORIENTED_EDGE('',*,*,#50985,.T.); +#51032 = ORIENTED_EDGE('',*,*,#48487,.F.); +#51033 = ORIENTED_EDGE('',*,*,#50897,.T.); +#51034 = PLANE('',#51035); +#51035 = AXIS2_PLACEMENT_3D('',#51036,#51037,#51038); +#51036 = CARTESIAN_POINT('',(0.1,-2.,2.448597401424)); +#51037 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#51038 = DIRECTION('',(0.,0.,1.)); +#51039 = ADVANCED_FACE('',(#51040),#51051,.T.); +#51040 = FACE_BOUND('',#51041,.T.); +#51041 = EDGE_LOOP('',(#51042,#51043,#51044,#51050)); +#51042 = ORIENTED_EDGE('',*,*,#48575,.T.); +#51043 = ORIENTED_EDGE('',*,*,#51002,.T.); +#51044 = ORIENTED_EDGE('',*,*,#51045,.F.); +#51045 = EDGE_CURVE('',#50930,#51003,#51046,.T.); +#51046 = LINE('',#51047,#51048); +#51047 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#51048 = VECTOR('',#51049,1.); +#51049 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51050 = ORIENTED_EDGE('',*,*,#50929,.F.); +#51051 = PLANE('',#51052); +#51052 = AXIS2_PLACEMENT_3D('',#51053,#51054,#51055); +#51053 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#51054 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51055 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51056 = ADVANCED_FACE('',(#51057),#51068,.T.); +#51057 = FACE_BOUND('',#51058,.T.); +#51058 = EDGE_LOOP('',(#51059,#51060,#51061,#51062)); +#51059 = ORIENTED_EDGE('',*,*,#48751,.T.); +#51060 = ORIENTED_EDGE('',*,*,#48614,.T.); +#51061 = ORIENTED_EDGE('',*,*,#48639,.T.); +#51062 = ORIENTED_EDGE('',*,*,#51063,.T.); +#51063 = EDGE_CURVE('',#48640,#48744,#51064,.T.); +#51064 = LINE('',#51065,#51066); +#51065 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,0.9)); +#51066 = VECTOR('',#51067,1.); +#51067 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51068 = PLANE('',#51069); +#51069 = AXIS2_PLACEMENT_3D('',#51070,#51071,#51072); +#51070 = CARTESIAN_POINT('',(2.775557561563E-17,-3.08148791102E-33,0.9) + ); +#51071 = DIRECTION('',(0.,0.,1.)); +#51072 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51073 = ADVANCED_FACE('',(#51074),#51085,.T.); +#51074 = FACE_BOUND('',#51075,.T.); +#51075 = EDGE_LOOP('',(#51076,#51077,#51083,#51084)); +#51076 = ORIENTED_EDGE('',*,*,#48719,.T.); +#51077 = ORIENTED_EDGE('',*,*,#51078,.F.); +#51078 = EDGE_CURVE('',#48664,#48720,#51079,.T.); +#51079 = LINE('',#51080,#51081); +#51080 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,0.9)); +#51081 = VECTOR('',#51082,1.); +#51082 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51083 = ORIENTED_EDGE('',*,*,#48671,.T.); +#51084 = ORIENTED_EDGE('',*,*,#48694,.T.); +#51085 = PLANE('',#51086); +#51086 = AXIS2_PLACEMENT_3D('',#51087,#51088,#51089); +#51087 = CARTESIAN_POINT('',(2.775557561563E-17,-3.08148791102E-33,0.9) + ); +#51088 = DIRECTION('',(0.,0.,1.)); +#51089 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51090 = ADVANCED_FACE('',(#51091),#51134,.T.); +#51091 = FACE_BOUND('',#51092,.T.); +#51092 = EDGE_LOOP('',(#51093,#51094,#51102,#51110,#51118,#51126,#51132, + #51133)); +#51093 = ORIENTED_EDGE('',*,*,#48727,.F.); +#51094 = ORIENTED_EDGE('',*,*,#51095,.T.); +#51095 = EDGE_CURVE('',#48728,#51096,#51098,.T.); +#51096 = VERTEX_POINT('',#51097); +#51097 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51098 = LINE('',#51099,#51100); +#51099 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#51100 = VECTOR('',#51101,1.); +#51101 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51102 = ORIENTED_EDGE('',*,*,#51103,.T.); +#51103 = EDGE_CURVE('',#51096,#51104,#51106,.T.); +#51104 = VERTEX_POINT('',#51105); +#51105 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51106 = LINE('',#51107,#51108); +#51107 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51108 = VECTOR('',#51109,1.); +#51109 = DIRECTION('',(0.,0.,-1.)); +#51110 = ORIENTED_EDGE('',*,*,#51111,.T.); +#51111 = EDGE_CURVE('',#51104,#51112,#51114,.T.); +#51112 = VERTEX_POINT('',#51113); +#51113 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51114 = LINE('',#51115,#51116); +#51115 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51116 = VECTOR('',#51117,1.); +#51117 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51118 = ORIENTED_EDGE('',*,*,#51119,.T.); +#51119 = EDGE_CURVE('',#51112,#51120,#51122,.T.); +#51120 = VERTEX_POINT('',#51121); +#51121 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51122 = LINE('',#51123,#51124); +#51123 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51124 = VECTOR('',#51125,1.); +#51125 = DIRECTION('',(0.,0.,1.)); +#51126 = ORIENTED_EDGE('',*,*,#51127,.T.); +#51127 = EDGE_CURVE('',#51120,#48656,#51128,.T.); +#51128 = LINE('',#51129,#51130); +#51129 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51130 = VECTOR('',#51131,1.); +#51131 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51132 = ORIENTED_EDGE('',*,*,#48663,.F.); +#51133 = ORIENTED_EDGE('',*,*,#51078,.T.); +#51134 = PLANE('',#51135); +#51135 = AXIS2_PLACEMENT_3D('',#51136,#51137,#51138); +#51136 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,2.448597401424)); +#51137 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#51138 = DIRECTION('',(0.,0.,1.)); +#51139 = ADVANCED_FACE('',(#51140),#51158,.T.); +#51140 = FACE_BOUND('',#51141,.T.); +#51141 = EDGE_LOOP('',(#51142,#51150,#51156,#51157)); +#51142 = ORIENTED_EDGE('',*,*,#51143,.T.); +#51143 = EDGE_CURVE('',#51120,#51144,#51146,.T.); +#51144 = VERTEX_POINT('',#51145); +#51145 = CARTESIAN_POINT('',(0.1,0.25,4.45)); +#51146 = LINE('',#51147,#51148); +#51147 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51148 = VECTOR('',#51149,1.); +#51149 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51150 = ORIENTED_EDGE('',*,*,#51151,.T.); +#51151 = EDGE_CURVE('',#51144,#48648,#51152,.T.); +#51152 = LINE('',#51153,#51154); +#51153 = CARTESIAN_POINT('',(0.1,0.25,4.45)); +#51154 = VECTOR('',#51155,1.); +#51155 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51156 = ORIENTED_EDGE('',*,*,#48655,.F.); +#51157 = ORIENTED_EDGE('',*,*,#51127,.F.); +#51158 = PLANE('',#51159); +#51159 = AXIS2_PLACEMENT_3D('',#51160,#51161,#51162); +#51160 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51161 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#51162 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51163 = ADVANCED_FACE('',(#51164),#51200,.F.); +#51164 = FACE_BOUND('',#51165,.F.); +#51165 = EDGE_LOOP('',(#51166,#51167,#51175,#51183,#51191,#51197,#51198, + #51199)); +#51166 = ORIENTED_EDGE('',*,*,#48743,.F.); +#51167 = ORIENTED_EDGE('',*,*,#51168,.T.); +#51168 = EDGE_CURVE('',#48736,#51169,#51171,.T.); +#51169 = VERTEX_POINT('',#51170); +#51170 = CARTESIAN_POINT('',(0.1,-0.25,4.45)); +#51171 = LINE('',#51172,#51173); +#51172 = CARTESIAN_POINT('',(0.1,-0.3,4.5)); +#51173 = VECTOR('',#51174,1.); +#51174 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51175 = ORIENTED_EDGE('',*,*,#51176,.T.); +#51176 = EDGE_CURVE('',#51169,#51177,#51179,.T.); +#51177 = VERTEX_POINT('',#51178); +#51178 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#51179 = LINE('',#51180,#51181); +#51180 = CARTESIAN_POINT('',(0.1,-0.25,4.45)); +#51181 = VECTOR('',#51182,1.); +#51182 = DIRECTION('',(0.,0.,-1.)); +#51183 = ORIENTED_EDGE('',*,*,#51184,.T.); +#51184 = EDGE_CURVE('',#51177,#51185,#51187,.T.); +#51185 = VERTEX_POINT('',#51186); +#51186 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#51187 = LINE('',#51188,#51189); +#51188 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#51189 = VECTOR('',#51190,1.); +#51190 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51191 = ORIENTED_EDGE('',*,*,#51192,.T.); +#51192 = EDGE_CURVE('',#51185,#51144,#51193,.T.); +#51193 = LINE('',#51194,#51195); +#51194 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#51195 = VECTOR('',#51196,1.); +#51196 = DIRECTION('',(0.,0.,1.)); +#51197 = ORIENTED_EDGE('',*,*,#51151,.T.); +#51198 = ORIENTED_EDGE('',*,*,#48647,.F.); +#51199 = ORIENTED_EDGE('',*,*,#51063,.T.); +#51200 = PLANE('',#51201); +#51201 = AXIS2_PLACEMENT_3D('',#51202,#51203,#51204); +#51202 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,2.448597401424)); +#51203 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#51204 = DIRECTION('',(0.,0.,1.)); +#51205 = ADVANCED_FACE('',(#51206),#51217,.T.); +#51206 = FACE_BOUND('',#51207,.T.); +#51207 = EDGE_LOOP('',(#51208,#51209,#51210,#51216)); +#51208 = ORIENTED_EDGE('',*,*,#48735,.T.); +#51209 = ORIENTED_EDGE('',*,*,#51168,.T.); +#51210 = ORIENTED_EDGE('',*,*,#51211,.F.); +#51211 = EDGE_CURVE('',#51096,#51169,#51212,.T.); +#51212 = LINE('',#51213,#51214); +#51213 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51214 = VECTOR('',#51215,1.); +#51215 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51216 = ORIENTED_EDGE('',*,*,#51095,.F.); +#51217 = PLANE('',#51218); +#51218 = AXIS2_PLACEMENT_3D('',#51219,#51220,#51221); +#51219 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#51220 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51221 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51222 = ADVANCED_FACE('',(#51223),#51234,.T.); +#51223 = FACE_BOUND('',#51224,.T.); +#51224 = EDGE_LOOP('',(#51225,#51231,#51232,#51233)); +#51225 = ORIENTED_EDGE('',*,*,#51226,.T.); +#51226 = EDGE_CURVE('',#49618,#49691,#51227,.T.); +#51227 = LINE('',#51228,#51229); +#51228 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#51229 = VECTOR('',#51230,1.); +#51230 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51231 = ORIENTED_EDGE('',*,*,#49698,.T.); +#51232 = ORIENTED_EDGE('',*,*,#49649,.F.); +#51233 = ORIENTED_EDGE('',*,*,#49625,.F.); +#51234 = PLANE('',#51235); +#51235 = AXIS2_PLACEMENT_3D('',#51236,#51237,#51238); +#51236 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#51237 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51238 = DIRECTION('',(0.,0.,1.)); +#51239 = ADVANCED_FACE('',(#51240),#51251,.T.); +#51240 = FACE_BOUND('',#51241,.T.); +#51241 = EDGE_LOOP('',(#51242,#51248,#51249,#51250)); +#51242 = ORIENTED_EDGE('',*,*,#51243,.T.); +#51243 = EDGE_CURVE('',#49610,#49683,#51244,.T.); +#51244 = LINE('',#51245,#51246); +#51245 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#51246 = VECTOR('',#51247,1.); +#51247 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51248 = ORIENTED_EDGE('',*,*,#49690,.T.); +#51249 = ORIENTED_EDGE('',*,*,#51226,.F.); +#51250 = ORIENTED_EDGE('',*,*,#49617,.F.); +#51251 = PLANE('',#51252); +#51252 = AXIS2_PLACEMENT_3D('',#51253,#51254,#51255); +#51253 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#51254 = DIRECTION('',(0.,0.,1.)); +#51255 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51256 = ADVANCED_FACE('',(#51257),#51263,.T.); +#51257 = FACE_BOUND('',#51258,.T.); +#51258 = EDGE_LOOP('',(#51259,#51260,#51261,#51262)); +#51259 = ORIENTED_EDGE('',*,*,#49717,.T.); +#51260 = ORIENTED_EDGE('',*,*,#49682,.T.); +#51261 = ORIENTED_EDGE('',*,*,#51243,.F.); +#51262 = ORIENTED_EDGE('',*,*,#49609,.F.); +#51263 = PLANE('',#51264); +#51264 = AXIS2_PLACEMENT_3D('',#51265,#51266,#51267); +#51265 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#51266 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51267 = DIRECTION('',(0.,0.,-1.)); +#51268 = ADVANCED_FACE('',(#51269),#51280,.T.); +#51269 = FACE_BOUND('',#51270,.T.); +#51270 = EDGE_LOOP('',(#51271,#51277,#51278,#51279)); +#51271 = ORIENTED_EDGE('',*,*,#51272,.T.); +#51272 = EDGE_CURVE('',#49784,#49857,#51273,.T.); +#51273 = LINE('',#51274,#51275); +#51274 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#51275 = VECTOR('',#51276,1.); +#51276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51277 = ORIENTED_EDGE('',*,*,#49864,.T.); +#51278 = ORIENTED_EDGE('',*,*,#49815,.F.); +#51279 = ORIENTED_EDGE('',*,*,#49791,.F.); +#51280 = PLANE('',#51281); +#51281 = AXIS2_PLACEMENT_3D('',#51282,#51283,#51284); +#51282 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#51283 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51284 = DIRECTION('',(0.,0.,1.)); +#51285 = ADVANCED_FACE('',(#51286),#51297,.T.); +#51286 = FACE_BOUND('',#51287,.T.); +#51287 = EDGE_LOOP('',(#51288,#51294,#51295,#51296)); +#51288 = ORIENTED_EDGE('',*,*,#51289,.T.); +#51289 = EDGE_CURVE('',#49776,#49849,#51290,.T.); +#51290 = LINE('',#51291,#51292); +#51291 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#51292 = VECTOR('',#51293,1.); +#51293 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51294 = ORIENTED_EDGE('',*,*,#49856,.T.); +#51295 = ORIENTED_EDGE('',*,*,#51272,.F.); +#51296 = ORIENTED_EDGE('',*,*,#49783,.F.); +#51297 = PLANE('',#51298); +#51298 = AXIS2_PLACEMENT_3D('',#51299,#51300,#51301); +#51299 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#51300 = DIRECTION('',(0.,0.,1.)); +#51301 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51302 = ADVANCED_FACE('',(#51303),#51309,.T.); +#51303 = FACE_BOUND('',#51304,.T.); +#51304 = EDGE_LOOP('',(#51305,#51306,#51307,#51308)); +#51305 = ORIENTED_EDGE('',*,*,#49883,.T.); +#51306 = ORIENTED_EDGE('',*,*,#49848,.T.); +#51307 = ORIENTED_EDGE('',*,*,#51289,.F.); +#51308 = ORIENTED_EDGE('',*,*,#49775,.F.); +#51309 = PLANE('',#51310); +#51310 = AXIS2_PLACEMENT_3D('',#51311,#51312,#51313); +#51311 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#51312 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51313 = DIRECTION('',(0.,0.,-1.)); +#51314 = ADVANCED_FACE('',(#51315),#51326,.T.); +#51315 = FACE_BOUND('',#51316,.T.); +#51316 = EDGE_LOOP('',(#51317,#51323,#51324,#51325)); +#51317 = ORIENTED_EDGE('',*,*,#51318,.T.); +#51318 = EDGE_CURVE('',#49950,#50023,#51319,.T.); +#51319 = LINE('',#51320,#51321); +#51320 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#51321 = VECTOR('',#51322,1.); +#51322 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51323 = ORIENTED_EDGE('',*,*,#50030,.T.); +#51324 = ORIENTED_EDGE('',*,*,#49981,.F.); +#51325 = ORIENTED_EDGE('',*,*,#49957,.F.); +#51326 = PLANE('',#51327); +#51327 = AXIS2_PLACEMENT_3D('',#51328,#51329,#51330); +#51328 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#51329 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51330 = DIRECTION('',(0.,0.,1.)); +#51331 = ADVANCED_FACE('',(#51332),#51343,.T.); +#51332 = FACE_BOUND('',#51333,.T.); +#51333 = EDGE_LOOP('',(#51334,#51340,#51341,#51342)); +#51334 = ORIENTED_EDGE('',*,*,#51335,.T.); +#51335 = EDGE_CURVE('',#49942,#50015,#51336,.T.); +#51336 = LINE('',#51337,#51338); +#51337 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#51338 = VECTOR('',#51339,1.); +#51339 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51340 = ORIENTED_EDGE('',*,*,#50022,.T.); +#51341 = ORIENTED_EDGE('',*,*,#51318,.F.); +#51342 = ORIENTED_EDGE('',*,*,#49949,.F.); +#51343 = PLANE('',#51344); +#51344 = AXIS2_PLACEMENT_3D('',#51345,#51346,#51347); +#51345 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#51346 = DIRECTION('',(0.,0.,1.)); +#51347 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51348 = ADVANCED_FACE('',(#51349),#51355,.T.); +#51349 = FACE_BOUND('',#51350,.T.); +#51350 = EDGE_LOOP('',(#51351,#51352,#51353,#51354)); +#51351 = ORIENTED_EDGE('',*,*,#50049,.T.); +#51352 = ORIENTED_EDGE('',*,*,#50014,.T.); +#51353 = ORIENTED_EDGE('',*,*,#51335,.F.); +#51354 = ORIENTED_EDGE('',*,*,#49941,.F.); +#51355 = PLANE('',#51356); +#51356 = AXIS2_PLACEMENT_3D('',#51357,#51358,#51359); +#51357 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#51358 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51359 = DIRECTION('',(0.,0.,-1.)); +#51360 = ADVANCED_FACE('',(#51361),#51372,.T.); +#51361 = FACE_BOUND('',#51362,.T.); +#51362 = EDGE_LOOP('',(#51363,#51369,#51370,#51371)); +#51363 = ORIENTED_EDGE('',*,*,#51364,.T.); +#51364 = EDGE_CURVE('',#50116,#50189,#51365,.T.); +#51365 = LINE('',#51366,#51367); +#51366 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#51367 = VECTOR('',#51368,1.); +#51368 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51369 = ORIENTED_EDGE('',*,*,#50196,.T.); +#51370 = ORIENTED_EDGE('',*,*,#50147,.F.); +#51371 = ORIENTED_EDGE('',*,*,#50123,.F.); +#51372 = PLANE('',#51373); +#51373 = AXIS2_PLACEMENT_3D('',#51374,#51375,#51376); +#51374 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#51375 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51376 = DIRECTION('',(0.,0.,1.)); +#51377 = ADVANCED_FACE('',(#51378),#51389,.T.); +#51378 = FACE_BOUND('',#51379,.T.); +#51379 = EDGE_LOOP('',(#51380,#51386,#51387,#51388)); +#51380 = ORIENTED_EDGE('',*,*,#51381,.T.); +#51381 = EDGE_CURVE('',#50108,#50181,#51382,.T.); +#51382 = LINE('',#51383,#51384); +#51383 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#51384 = VECTOR('',#51385,1.); +#51385 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51386 = ORIENTED_EDGE('',*,*,#50188,.T.); +#51387 = ORIENTED_EDGE('',*,*,#51364,.F.); +#51388 = ORIENTED_EDGE('',*,*,#50115,.F.); +#51389 = PLANE('',#51390); +#51390 = AXIS2_PLACEMENT_3D('',#51391,#51392,#51393); +#51391 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#51392 = DIRECTION('',(0.,0.,1.)); +#51393 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51394 = ADVANCED_FACE('',(#51395),#51401,.T.); +#51395 = FACE_BOUND('',#51396,.T.); +#51396 = EDGE_LOOP('',(#51397,#51398,#51399,#51400)); +#51397 = ORIENTED_EDGE('',*,*,#50215,.T.); +#51398 = ORIENTED_EDGE('',*,*,#50180,.T.); +#51399 = ORIENTED_EDGE('',*,*,#51381,.F.); +#51400 = ORIENTED_EDGE('',*,*,#50107,.F.); +#51401 = PLANE('',#51402); +#51402 = AXIS2_PLACEMENT_3D('',#51403,#51404,#51405); +#51403 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#51404 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51405 = DIRECTION('',(0.,0.,-1.)); +#51406 = ADVANCED_FACE('',(#51407),#51418,.T.); +#51407 = FACE_BOUND('',#51408,.T.); +#51408 = EDGE_LOOP('',(#51409,#51415,#51416,#51417)); +#51409 = ORIENTED_EDGE('',*,*,#51410,.T.); +#51410 = EDGE_CURVE('',#50282,#50355,#51411,.T.); +#51411 = LINE('',#51412,#51413); +#51412 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#51413 = VECTOR('',#51414,1.); +#51414 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51415 = ORIENTED_EDGE('',*,*,#50362,.T.); +#51416 = ORIENTED_EDGE('',*,*,#50313,.F.); +#51417 = ORIENTED_EDGE('',*,*,#50289,.F.); +#51418 = PLANE('',#51419); +#51419 = AXIS2_PLACEMENT_3D('',#51420,#51421,#51422); +#51420 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#51421 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51422 = DIRECTION('',(0.,0.,1.)); +#51423 = ADVANCED_FACE('',(#51424),#51435,.T.); +#51424 = FACE_BOUND('',#51425,.T.); +#51425 = EDGE_LOOP('',(#51426,#51432,#51433,#51434)); +#51426 = ORIENTED_EDGE('',*,*,#51427,.T.); +#51427 = EDGE_CURVE('',#50274,#50347,#51428,.T.); +#51428 = LINE('',#51429,#51430); +#51429 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#51430 = VECTOR('',#51431,1.); +#51431 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51432 = ORIENTED_EDGE('',*,*,#50354,.T.); +#51433 = ORIENTED_EDGE('',*,*,#51410,.F.); +#51434 = ORIENTED_EDGE('',*,*,#50281,.F.); +#51435 = PLANE('',#51436); +#51436 = AXIS2_PLACEMENT_3D('',#51437,#51438,#51439); +#51437 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#51438 = DIRECTION('',(0.,0.,1.)); +#51439 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51440 = ADVANCED_FACE('',(#51441),#51447,.T.); +#51441 = FACE_BOUND('',#51442,.T.); +#51442 = EDGE_LOOP('',(#51443,#51444,#51445,#51446)); +#51443 = ORIENTED_EDGE('',*,*,#50381,.T.); +#51444 = ORIENTED_EDGE('',*,*,#50346,.T.); +#51445 = ORIENTED_EDGE('',*,*,#51427,.F.); +#51446 = ORIENTED_EDGE('',*,*,#50273,.F.); +#51447 = PLANE('',#51448); +#51448 = AXIS2_PLACEMENT_3D('',#51449,#51450,#51451); +#51449 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#51450 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51451 = DIRECTION('',(0.,0.,-1.)); +#51452 = ADVANCED_FACE('',(#51453),#51464,.T.); +#51453 = FACE_BOUND('',#51454,.T.); +#51454 = EDGE_LOOP('',(#51455,#51461,#51462,#51463)); +#51455 = ORIENTED_EDGE('',*,*,#51456,.T.); +#51456 = EDGE_CURVE('',#50448,#50521,#51457,.T.); +#51457 = LINE('',#51458,#51459); +#51458 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#51459 = VECTOR('',#51460,1.); +#51460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51461 = ORIENTED_EDGE('',*,*,#50528,.T.); +#51462 = ORIENTED_EDGE('',*,*,#50479,.F.); +#51463 = ORIENTED_EDGE('',*,*,#50455,.F.); +#51464 = PLANE('',#51465); +#51465 = AXIS2_PLACEMENT_3D('',#51466,#51467,#51468); +#51466 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#51467 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51468 = DIRECTION('',(0.,0.,1.)); +#51469 = ADVANCED_FACE('',(#51470),#51481,.T.); +#51470 = FACE_BOUND('',#51471,.T.); +#51471 = EDGE_LOOP('',(#51472,#51478,#51479,#51480)); +#51472 = ORIENTED_EDGE('',*,*,#51473,.T.); +#51473 = EDGE_CURVE('',#50440,#50513,#51474,.T.); +#51474 = LINE('',#51475,#51476); +#51475 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#51476 = VECTOR('',#51477,1.); +#51477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51478 = ORIENTED_EDGE('',*,*,#50520,.T.); +#51479 = ORIENTED_EDGE('',*,*,#51456,.F.); +#51480 = ORIENTED_EDGE('',*,*,#50447,.F.); +#51481 = PLANE('',#51482); +#51482 = AXIS2_PLACEMENT_3D('',#51483,#51484,#51485); +#51483 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#51484 = DIRECTION('',(0.,0.,1.)); +#51485 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51486 = ADVANCED_FACE('',(#51487),#51493,.T.); +#51487 = FACE_BOUND('',#51488,.T.); +#51488 = EDGE_LOOP('',(#51489,#51490,#51491,#51492)); +#51489 = ORIENTED_EDGE('',*,*,#50547,.T.); +#51490 = ORIENTED_EDGE('',*,*,#50512,.T.); +#51491 = ORIENTED_EDGE('',*,*,#51473,.F.); +#51492 = ORIENTED_EDGE('',*,*,#50439,.F.); +#51493 = PLANE('',#51494); +#51494 = AXIS2_PLACEMENT_3D('',#51495,#51496,#51497); +#51495 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#51496 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51497 = DIRECTION('',(0.,0.,-1.)); +#51498 = ADVANCED_FACE('',(#51499),#51510,.T.); +#51499 = FACE_BOUND('',#51500,.T.); +#51500 = EDGE_LOOP('',(#51501,#51507,#51508,#51509)); +#51501 = ORIENTED_EDGE('',*,*,#51502,.T.); +#51502 = EDGE_CURVE('',#50614,#50687,#51503,.T.); +#51503 = LINE('',#51504,#51505); +#51504 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#51505 = VECTOR('',#51506,1.); +#51506 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51507 = ORIENTED_EDGE('',*,*,#50694,.T.); +#51508 = ORIENTED_EDGE('',*,*,#50645,.F.); +#51509 = ORIENTED_EDGE('',*,*,#50621,.F.); +#51510 = PLANE('',#51511); +#51511 = AXIS2_PLACEMENT_3D('',#51512,#51513,#51514); +#51512 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#51513 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51514 = DIRECTION('',(0.,0.,1.)); +#51515 = ADVANCED_FACE('',(#51516),#51527,.T.); +#51516 = FACE_BOUND('',#51517,.T.); +#51517 = EDGE_LOOP('',(#51518,#51524,#51525,#51526)); +#51518 = ORIENTED_EDGE('',*,*,#51519,.T.); +#51519 = EDGE_CURVE('',#50606,#50679,#51520,.T.); +#51520 = LINE('',#51521,#51522); +#51521 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#51522 = VECTOR('',#51523,1.); +#51523 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51524 = ORIENTED_EDGE('',*,*,#50686,.T.); +#51525 = ORIENTED_EDGE('',*,*,#51502,.F.); +#51526 = ORIENTED_EDGE('',*,*,#50613,.F.); +#51527 = PLANE('',#51528); +#51528 = AXIS2_PLACEMENT_3D('',#51529,#51530,#51531); +#51529 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#51530 = DIRECTION('',(0.,0.,1.)); +#51531 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51532 = ADVANCED_FACE('',(#51533),#51539,.T.); +#51533 = FACE_BOUND('',#51534,.T.); +#51534 = EDGE_LOOP('',(#51535,#51536,#51537,#51538)); +#51535 = ORIENTED_EDGE('',*,*,#50713,.T.); +#51536 = ORIENTED_EDGE('',*,*,#50678,.T.); +#51537 = ORIENTED_EDGE('',*,*,#51519,.F.); +#51538 = ORIENTED_EDGE('',*,*,#50605,.F.); +#51539 = PLANE('',#51540); +#51540 = AXIS2_PLACEMENT_3D('',#51541,#51542,#51543); +#51541 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#51542 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51543 = DIRECTION('',(0.,0.,-1.)); +#51544 = ADVANCED_FACE('',(#51545),#51556,.T.); +#51545 = FACE_BOUND('',#51546,.T.); +#51546 = EDGE_LOOP('',(#51547,#51553,#51554,#51555)); +#51547 = ORIENTED_EDGE('',*,*,#51548,.T.); +#51548 = EDGE_CURVE('',#50780,#50853,#51549,.T.); +#51549 = LINE('',#51550,#51551); +#51550 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#51551 = VECTOR('',#51552,1.); +#51552 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51553 = ORIENTED_EDGE('',*,*,#50860,.T.); +#51554 = ORIENTED_EDGE('',*,*,#50811,.F.); +#51555 = ORIENTED_EDGE('',*,*,#50787,.F.); +#51556 = PLANE('',#51557); +#51557 = AXIS2_PLACEMENT_3D('',#51558,#51559,#51560); +#51558 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#51559 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51560 = DIRECTION('',(0.,0.,1.)); +#51561 = ADVANCED_FACE('',(#51562),#51573,.T.); +#51562 = FACE_BOUND('',#51563,.T.); +#51563 = EDGE_LOOP('',(#51564,#51570,#51571,#51572)); +#51564 = ORIENTED_EDGE('',*,*,#51565,.T.); +#51565 = EDGE_CURVE('',#50772,#50845,#51566,.T.); +#51566 = LINE('',#51567,#51568); +#51567 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#51568 = VECTOR('',#51569,1.); +#51569 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51570 = ORIENTED_EDGE('',*,*,#50852,.T.); +#51571 = ORIENTED_EDGE('',*,*,#51548,.F.); +#51572 = ORIENTED_EDGE('',*,*,#50779,.F.); +#51573 = PLANE('',#51574); +#51574 = AXIS2_PLACEMENT_3D('',#51575,#51576,#51577); +#51575 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#51576 = DIRECTION('',(0.,0.,1.)); +#51577 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51578 = ADVANCED_FACE('',(#51579),#51585,.T.); +#51579 = FACE_BOUND('',#51580,.T.); +#51580 = EDGE_LOOP('',(#51581,#51582,#51583,#51584)); +#51581 = ORIENTED_EDGE('',*,*,#50879,.T.); +#51582 = ORIENTED_EDGE('',*,*,#50844,.T.); +#51583 = ORIENTED_EDGE('',*,*,#51565,.F.); +#51584 = ORIENTED_EDGE('',*,*,#50771,.F.); +#51585 = PLANE('',#51586); +#51586 = AXIS2_PLACEMENT_3D('',#51587,#51588,#51589); +#51587 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#51588 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51589 = DIRECTION('',(0.,0.,-1.)); +#51590 = ADVANCED_FACE('',(#51591),#51602,.T.); +#51591 = FACE_BOUND('',#51592,.T.); +#51592 = EDGE_LOOP('',(#51593,#51599,#51600,#51601)); +#51593 = ORIENTED_EDGE('',*,*,#51594,.T.); +#51594 = EDGE_CURVE('',#50946,#51019,#51595,.T.); +#51595 = LINE('',#51596,#51597); +#51596 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#51597 = VECTOR('',#51598,1.); +#51598 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51599 = ORIENTED_EDGE('',*,*,#51026,.T.); +#51600 = ORIENTED_EDGE('',*,*,#50977,.F.); +#51601 = ORIENTED_EDGE('',*,*,#50953,.F.); +#51602 = PLANE('',#51603); +#51603 = AXIS2_PLACEMENT_3D('',#51604,#51605,#51606); +#51604 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#51605 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51606 = DIRECTION('',(0.,0.,1.)); +#51607 = ADVANCED_FACE('',(#51608),#51619,.T.); +#51608 = FACE_BOUND('',#51609,.T.); +#51609 = EDGE_LOOP('',(#51610,#51616,#51617,#51618)); +#51610 = ORIENTED_EDGE('',*,*,#51611,.T.); +#51611 = EDGE_CURVE('',#50938,#51011,#51612,.T.); +#51612 = LINE('',#51613,#51614); +#51613 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#51614 = VECTOR('',#51615,1.); +#51615 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51616 = ORIENTED_EDGE('',*,*,#51018,.T.); +#51617 = ORIENTED_EDGE('',*,*,#51594,.F.); +#51618 = ORIENTED_EDGE('',*,*,#50945,.F.); +#51619 = PLANE('',#51620); +#51620 = AXIS2_PLACEMENT_3D('',#51621,#51622,#51623); +#51621 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#51622 = DIRECTION('',(0.,0.,1.)); +#51623 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51624 = ADVANCED_FACE('',(#51625),#51631,.T.); +#51625 = FACE_BOUND('',#51626,.T.); +#51626 = EDGE_LOOP('',(#51627,#51628,#51629,#51630)); +#51627 = ORIENTED_EDGE('',*,*,#51045,.T.); +#51628 = ORIENTED_EDGE('',*,*,#51010,.T.); +#51629 = ORIENTED_EDGE('',*,*,#51611,.F.); +#51630 = ORIENTED_EDGE('',*,*,#50937,.F.); +#51631 = PLANE('',#51632); +#51632 = AXIS2_PLACEMENT_3D('',#51633,#51634,#51635); +#51633 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#51634 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51635 = DIRECTION('',(0.,0.,-1.)); +#51636 = ADVANCED_FACE('',(#51637),#51648,.T.); +#51637 = FACE_BOUND('',#51638,.T.); +#51638 = EDGE_LOOP('',(#51639,#51645,#51646,#51647)); +#51639 = ORIENTED_EDGE('',*,*,#51640,.T.); +#51640 = EDGE_CURVE('',#51112,#51185,#51641,.T.); +#51641 = LINE('',#51642,#51643); +#51642 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51643 = VECTOR('',#51644,1.); +#51644 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51645 = ORIENTED_EDGE('',*,*,#51192,.T.); +#51646 = ORIENTED_EDGE('',*,*,#51143,.F.); +#51647 = ORIENTED_EDGE('',*,*,#51119,.F.); +#51648 = PLANE('',#51649); +#51649 = AXIS2_PLACEMENT_3D('',#51650,#51651,#51652); +#51650 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51651 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51652 = DIRECTION('',(0.,0.,1.)); +#51653 = ADVANCED_FACE('',(#51654),#51665,.T.); +#51654 = FACE_BOUND('',#51655,.T.); +#51655 = EDGE_LOOP('',(#51656,#51662,#51663,#51664)); +#51656 = ORIENTED_EDGE('',*,*,#51657,.T.); +#51657 = EDGE_CURVE('',#51104,#51177,#51658,.T.); +#51658 = LINE('',#51659,#51660); +#51659 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51660 = VECTOR('',#51661,1.); +#51661 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51662 = ORIENTED_EDGE('',*,*,#51184,.T.); +#51663 = ORIENTED_EDGE('',*,*,#51640,.F.); +#51664 = ORIENTED_EDGE('',*,*,#51111,.F.); +#51665 = PLANE('',#51666); +#51666 = AXIS2_PLACEMENT_3D('',#51667,#51668,#51669); +#51667 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51668 = DIRECTION('',(0.,0.,1.)); +#51669 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51670 = ADVANCED_FACE('',(#51671),#51677,.T.); +#51671 = FACE_BOUND('',#51672,.T.); +#51672 = EDGE_LOOP('',(#51673,#51674,#51675,#51676)); +#51673 = ORIENTED_EDGE('',*,*,#51211,.T.); +#51674 = ORIENTED_EDGE('',*,*,#51176,.T.); +#51675 = ORIENTED_EDGE('',*,*,#51657,.F.); +#51676 = ORIENTED_EDGE('',*,*,#51103,.F.); +#51677 = PLANE('',#51678); +#51678 = AXIS2_PLACEMENT_3D('',#51679,#51680,#51681); +#51679 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51680 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51681 = DIRECTION('',(0.,0.,-1.)); +#51682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#51686)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#51683,#51684,#51685)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#51683 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#51684 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#51685 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#51686 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#51683, + 'distance_accuracy_value','confusion accuracy'); +#51687 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51688,#51690); +#51688 = ( REPRESENTATION_RELATIONSHIP('','',#43639,#43616) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51689) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51689 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43617); +#51690 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51691); +#51691 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('37','=>[0:1:1:27]','',#43611, + #43634,$); +#51692 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#43636)); +#51693 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51694,#51696); +#51694 = ( REPRESENTATION_RELATIONSHIP('','',#4928,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51695) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51695 = ITEM_DEFINED_TRANSFORMATION('','',#11,#115); +#51696 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51697); +#51697 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('39','D2','',#5,#4923,$); +#51698 = SHAPE_DEFINITION_REPRESENTATION(#51699,#51705); +#51699 = PRODUCT_DEFINITION_SHAPE('','',#51700); +#51700 = PRODUCT_DEFINITION('design','',#51701,#51704); +#51701 = PRODUCT_DEFINITION_FORMATION('','',#51702); +#51702 = PRODUCT('R_1206_3216Metric','R_1206_3216Metric','',(#51703)); +#51703 = PRODUCT_CONTEXT('',#2,'mechanical'); +#51704 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#51705 = SHAPE_REPRESENTATION('',(#11,#51706),#51710); +#51706 = AXIS2_PLACEMENT_3D('',#51707,#51708,#51709); +#51707 = CARTESIAN_POINT('',(0.,0.,0.)); +#51708 = DIRECTION('',(0.,0.,1.)); +#51709 = DIRECTION('',(1.,0.,-0.)); +#51710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#51714)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#51711,#51712,#51713)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#51711 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#51712 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#51713 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#51714 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#51711, + 'distance_accuracy_value','confusion accuracy'); +#51715 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51716,#51718); +#51716 = ( REPRESENTATION_RELATIONSHIP('','',#51705,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51717) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51717 = ITEM_DEFINED_TRANSFORMATION('','',#11,#119); +#51718 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51719); +#51719 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','RS1','',#5,#51700,$); +#51720 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#51702)); +#51721 = SHAPE_DEFINITION_REPRESENTATION(#51722,#51728); +#51722 = PRODUCT_DEFINITION_SHAPE('','',#51723); +#51723 = PRODUCT_DEFINITION('design','',#51724,#51727); +#51724 = PRODUCT_DEFINITION_FORMATION('','',#51725); +#51725 = PRODUCT('R_1206_3216Metric','R_1206_3216Metric','',(#51726)); +#51726 = PRODUCT_CONTEXT('',#2,'mechanical'); +#51727 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#51728 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#51729),#52519); +#51729 = MANIFOLD_SOLID_BREP('',#51730); +#51730 = CLOSED_SHELL('',(#51731,#51771,#51854,#51879,#51904,#51971, + #51988,#52005,#52054,#52071,#52088,#52137,#52154,#52223,#52254, + #52278,#52347,#52371,#52388,#52405,#52422,#52439,#52456,#52473, + #52490,#52507)); +#51731 = ADVANCED_FACE('',(#51732),#51766,.F.); +#51732 = FACE_BOUND('',#51733,.F.); +#51733 = EDGE_LOOP('',(#51734,#51744,#51752,#51760)); +#51734 = ORIENTED_EDGE('',*,*,#51735,.F.); +#51735 = EDGE_CURVE('',#51736,#51738,#51740,.T.); +#51736 = VERTEX_POINT('',#51737); +#51737 = CARTESIAN_POINT('',(-1.6,-0.8,5.5E-02)); +#51738 = VERTEX_POINT('',#51739); +#51739 = CARTESIAN_POINT('',(-1.6,-0.8,0.495)); +#51740 = LINE('',#51741,#51742); +#51741 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51742 = VECTOR('',#51743,1.); +#51743 = DIRECTION('',(0.,0.,1.)); +#51744 = ORIENTED_EDGE('',*,*,#51745,.T.); +#51745 = EDGE_CURVE('',#51736,#51746,#51748,.T.); +#51746 = VERTEX_POINT('',#51747); +#51747 = CARTESIAN_POINT('',(-1.6,0.8,5.5E-02)); +#51748 = LINE('',#51749,#51750); +#51749 = CARTESIAN_POINT('',(-1.6,-0.8,5.5E-02)); +#51750 = VECTOR('',#51751,1.); +#51751 = DIRECTION('',(0.,1.,0.)); +#51752 = ORIENTED_EDGE('',*,*,#51753,.T.); +#51753 = EDGE_CURVE('',#51746,#51754,#51756,.T.); +#51754 = VERTEX_POINT('',#51755); +#51755 = CARTESIAN_POINT('',(-1.6,0.8,0.495)); +#51756 = LINE('',#51757,#51758); +#51757 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#51758 = VECTOR('',#51759,1.); +#51759 = DIRECTION('',(0.,0.,1.)); +#51760 = ORIENTED_EDGE('',*,*,#51761,.F.); +#51761 = EDGE_CURVE('',#51738,#51754,#51762,.T.); +#51762 = LINE('',#51763,#51764); +#51763 = CARTESIAN_POINT('',(-1.6,-0.8,0.495)); +#51764 = VECTOR('',#51765,1.); +#51765 = DIRECTION('',(0.,1.,0.)); +#51766 = PLANE('',#51767); +#51767 = AXIS2_PLACEMENT_3D('',#51768,#51769,#51770); +#51768 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51769 = DIRECTION('',(1.,0.,0.)); +#51770 = DIRECTION('',(0.,0.,1.)); +#51771 = ADVANCED_FACE('',(#51772),#51849,.F.); +#51772 = FACE_BOUND('',#51773,.F.); +#51773 = EDGE_LOOP('',(#51774,#51784,#51791,#51792,#51801,#51809,#51818, + #51826,#51834,#51842)); +#51774 = ORIENTED_EDGE('',*,*,#51775,.F.); +#51775 = EDGE_CURVE('',#51776,#51778,#51780,.T.); +#51776 = VERTEX_POINT('',#51777); +#51777 = CARTESIAN_POINT('',(-1.545,-0.8,0.)); +#51778 = VERTEX_POINT('',#51779); +#51779 = CARTESIAN_POINT('',(-1.255,-0.8,0.)); +#51780 = LINE('',#51781,#51782); +#51781 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51782 = VECTOR('',#51783,1.); +#51783 = DIRECTION('',(1.,0.,0.)); +#51784 = ORIENTED_EDGE('',*,*,#51785,.F.); +#51785 = EDGE_CURVE('',#51736,#51776,#51786,.T.); +#51786 = CIRCLE('',#51787,5.5E-02); +#51787 = AXIS2_PLACEMENT_3D('',#51788,#51789,#51790); +#51788 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51789 = DIRECTION('',(0.,-1.,0.)); +#51790 = DIRECTION('',(0.,0.,1.)); +#51791 = ORIENTED_EDGE('',*,*,#51735,.T.); +#51792 = ORIENTED_EDGE('',*,*,#51793,.T.); +#51793 = EDGE_CURVE('',#51738,#51794,#51796,.T.); +#51794 = VERTEX_POINT('',#51795); +#51795 = CARTESIAN_POINT('',(-1.545,-0.8,0.55)); +#51796 = CIRCLE('',#51797,5.5E-02); +#51797 = AXIS2_PLACEMENT_3D('',#51798,#51799,#51800); +#51798 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51799 = DIRECTION('',(0.,1.,0.)); +#51800 = DIRECTION('',(0.,-0.,1.)); +#51801 = ORIENTED_EDGE('',*,*,#51802,.T.); +#51802 = EDGE_CURVE('',#51794,#51803,#51805,.T.); +#51803 = VERTEX_POINT('',#51804); +#51804 = CARTESIAN_POINT('',(-1.255,-0.8,0.55)); +#51805 = LINE('',#51806,#51807); +#51806 = CARTESIAN_POINT('',(-1.6,-0.8,0.55)); +#51807 = VECTOR('',#51808,1.); +#51808 = DIRECTION('',(1.,0.,0.)); +#51809 = ORIENTED_EDGE('',*,*,#51810,.F.); +#51810 = EDGE_CURVE('',#51811,#51803,#51813,.T.); +#51811 = VERTEX_POINT('',#51812); +#51812 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#51813 = CIRCLE('',#51814,5.5E-02); +#51814 = AXIS2_PLACEMENT_3D('',#51815,#51816,#51817); +#51815 = CARTESIAN_POINT('',(-1.255,-0.8,0.495)); +#51816 = DIRECTION('',(0.,-1.,0.)); +#51817 = DIRECTION('',(0.,0.,1.)); +#51818 = ORIENTED_EDGE('',*,*,#51819,.F.); +#51819 = EDGE_CURVE('',#51820,#51811,#51822,.T.); +#51820 = VERTEX_POINT('',#51821); +#51821 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51822 = LINE('',#51823,#51824); +#51823 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51824 = VECTOR('',#51825,1.); +#51825 = DIRECTION('',(1.,0.,0.)); +#51826 = ORIENTED_EDGE('',*,*,#51827,.F.); +#51827 = EDGE_CURVE('',#51828,#51820,#51830,.T.); +#51828 = VERTEX_POINT('',#51829); +#51829 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51830 = LINE('',#51831,#51832); +#51831 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51832 = VECTOR('',#51833,1.); +#51833 = DIRECTION('',(0.,0.,1.)); +#51834 = ORIENTED_EDGE('',*,*,#51835,.T.); +#51835 = EDGE_CURVE('',#51828,#51836,#51838,.T.); +#51836 = VERTEX_POINT('',#51837); +#51837 = CARTESIAN_POINT('',(-1.2,-0.8,5.5E-02)); +#51838 = LINE('',#51839,#51840); +#51839 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51840 = VECTOR('',#51841,1.); +#51841 = DIRECTION('',(1.,0.,0.)); +#51842 = ORIENTED_EDGE('',*,*,#51843,.T.); +#51843 = EDGE_CURVE('',#51836,#51778,#51844,.T.); +#51844 = CIRCLE('',#51845,5.5E-02); +#51845 = AXIS2_PLACEMENT_3D('',#51846,#51847,#51848); +#51846 = CARTESIAN_POINT('',(-1.255,-0.8,5.5E-02)); +#51847 = DIRECTION('',(0.,1.,0.)); +#51848 = DIRECTION('',(0.,-0.,1.)); +#51849 = PLANE('',#51850); +#51850 = AXIS2_PLACEMENT_3D('',#51851,#51852,#51853); +#51851 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51852 = DIRECTION('',(0.,1.,0.)); +#51853 = DIRECTION('',(0.,-0.,1.)); +#51854 = ADVANCED_FACE('',(#51855),#51874,.T.); +#51855 = FACE_BOUND('',#51856,.T.); +#51856 = EDGE_LOOP('',(#51857,#51858,#51867,#51873)); +#51857 = ORIENTED_EDGE('',*,*,#51745,.T.); +#51858 = ORIENTED_EDGE('',*,*,#51859,.T.); +#51859 = EDGE_CURVE('',#51746,#51860,#51862,.T.); +#51860 = VERTEX_POINT('',#51861); +#51861 = CARTESIAN_POINT('',(-1.545,0.8,0.)); +#51862 = CIRCLE('',#51863,5.5E-02); +#51863 = AXIS2_PLACEMENT_3D('',#51864,#51865,#51866); +#51864 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51865 = DIRECTION('',(0.,-1.,0.)); +#51866 = DIRECTION('',(0.,0.,1.)); +#51867 = ORIENTED_EDGE('',*,*,#51868,.F.); +#51868 = EDGE_CURVE('',#51776,#51860,#51869,.T.); +#51869 = LINE('',#51870,#51871); +#51870 = CARTESIAN_POINT('',(-1.545,-0.8,0.)); +#51871 = VECTOR('',#51872,1.); +#51872 = DIRECTION('',(0.,1.,0.)); +#51873 = ORIENTED_EDGE('',*,*,#51785,.F.); +#51874 = CYLINDRICAL_SURFACE('',#51875,5.5E-02); +#51875 = AXIS2_PLACEMENT_3D('',#51876,#51877,#51878); +#51876 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51877 = DIRECTION('',(0.,1.,0.)); +#51878 = DIRECTION('',(-1.,0.,0.)); +#51879 = ADVANCED_FACE('',(#51880),#51899,.T.); +#51880 = FACE_BOUND('',#51881,.T.); +#51881 = EDGE_LOOP('',(#51882,#51883,#51891,#51898)); +#51882 = ORIENTED_EDGE('',*,*,#51793,.T.); +#51883 = ORIENTED_EDGE('',*,*,#51884,.T.); +#51884 = EDGE_CURVE('',#51794,#51885,#51887,.T.); +#51885 = VERTEX_POINT('',#51886); +#51886 = CARTESIAN_POINT('',(-1.545,0.8,0.55)); +#51887 = LINE('',#51888,#51889); +#51888 = CARTESIAN_POINT('',(-1.545,-0.8,0.55)); +#51889 = VECTOR('',#51890,1.); +#51890 = DIRECTION('',(0.,1.,0.)); +#51891 = ORIENTED_EDGE('',*,*,#51892,.F.); +#51892 = EDGE_CURVE('',#51754,#51885,#51893,.T.); +#51893 = CIRCLE('',#51894,5.5E-02); +#51894 = AXIS2_PLACEMENT_3D('',#51895,#51896,#51897); +#51895 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#51896 = DIRECTION('',(0.,1.,0.)); +#51897 = DIRECTION('',(0.,-0.,1.)); +#51898 = ORIENTED_EDGE('',*,*,#51761,.F.); +#51899 = CYLINDRICAL_SURFACE('',#51900,5.5E-02); +#51900 = AXIS2_PLACEMENT_3D('',#51901,#51902,#51903); +#51901 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51902 = DIRECTION('',(0.,1.,0.)); +#51903 = DIRECTION('',(-1.,0.,0.)); +#51904 = ADVANCED_FACE('',(#51905),#51966,.T.); +#51905 = FACE_BOUND('',#51906,.T.); +#51906 = EDGE_LOOP('',(#51907,#51915,#51916,#51917,#51918,#51926,#51935, + #51943,#51951,#51959)); +#51907 = ORIENTED_EDGE('',*,*,#51908,.F.); +#51908 = EDGE_CURVE('',#51860,#51909,#51911,.T.); +#51909 = VERTEX_POINT('',#51910); +#51910 = CARTESIAN_POINT('',(-1.255,0.8,0.)); +#51911 = LINE('',#51912,#51913); +#51912 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#51913 = VECTOR('',#51914,1.); +#51914 = DIRECTION('',(1.,0.,0.)); +#51915 = ORIENTED_EDGE('',*,*,#51859,.F.); +#51916 = ORIENTED_EDGE('',*,*,#51753,.T.); +#51917 = ORIENTED_EDGE('',*,*,#51892,.T.); +#51918 = ORIENTED_EDGE('',*,*,#51919,.T.); +#51919 = EDGE_CURVE('',#51885,#51920,#51922,.T.); +#51920 = VERTEX_POINT('',#51921); +#51921 = CARTESIAN_POINT('',(-1.255,0.8,0.55)); +#51922 = LINE('',#51923,#51924); +#51923 = CARTESIAN_POINT('',(-1.6,0.8,0.55)); +#51924 = VECTOR('',#51925,1.); +#51925 = DIRECTION('',(1.,0.,0.)); +#51926 = ORIENTED_EDGE('',*,*,#51927,.F.); +#51927 = EDGE_CURVE('',#51928,#51920,#51930,.T.); +#51928 = VERTEX_POINT('',#51929); +#51929 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#51930 = CIRCLE('',#51931,5.5E-02); +#51931 = AXIS2_PLACEMENT_3D('',#51932,#51933,#51934); +#51932 = CARTESIAN_POINT('',(-1.255,0.8,0.495)); +#51933 = DIRECTION('',(0.,-1.,0.)); +#51934 = DIRECTION('',(0.,0.,1.)); +#51935 = ORIENTED_EDGE('',*,*,#51936,.F.); +#51936 = EDGE_CURVE('',#51937,#51928,#51939,.T.); +#51937 = VERTEX_POINT('',#51938); +#51938 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#51939 = LINE('',#51940,#51941); +#51940 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#51941 = VECTOR('',#51942,1.); +#51942 = DIRECTION('',(1.,0.,0.)); +#51943 = ORIENTED_EDGE('',*,*,#51944,.F.); +#51944 = EDGE_CURVE('',#51945,#51937,#51947,.T.); +#51945 = VERTEX_POINT('',#51946); +#51946 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51947 = LINE('',#51948,#51949); +#51948 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51949 = VECTOR('',#51950,1.); +#51950 = DIRECTION('',(0.,0.,1.)); +#51951 = ORIENTED_EDGE('',*,*,#51952,.T.); +#51952 = EDGE_CURVE('',#51945,#51953,#51955,.T.); +#51953 = VERTEX_POINT('',#51954); +#51954 = CARTESIAN_POINT('',(-1.2,0.8,5.5E-02)); +#51955 = LINE('',#51956,#51957); +#51956 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51957 = VECTOR('',#51958,1.); +#51958 = DIRECTION('',(1.,0.,0.)); +#51959 = ORIENTED_EDGE('',*,*,#51960,.T.); +#51960 = EDGE_CURVE('',#51953,#51909,#51961,.T.); +#51961 = CIRCLE('',#51962,5.5E-02); +#51962 = AXIS2_PLACEMENT_3D('',#51963,#51964,#51965); +#51963 = CARTESIAN_POINT('',(-1.255,0.8,5.5E-02)); +#51964 = DIRECTION('',(0.,1.,0.)); +#51965 = DIRECTION('',(0.,-0.,1.)); +#51966 = PLANE('',#51967); +#51967 = AXIS2_PLACEMENT_3D('',#51968,#51969,#51970); +#51968 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#51969 = DIRECTION('',(0.,1.,0.)); +#51970 = DIRECTION('',(0.,-0.,1.)); +#51971 = ADVANCED_FACE('',(#51972),#51983,.F.); +#51972 = FACE_BOUND('',#51973,.F.); +#51973 = EDGE_LOOP('',(#51974,#51975,#51976,#51977)); +#51974 = ORIENTED_EDGE('',*,*,#51908,.F.); +#51975 = ORIENTED_EDGE('',*,*,#51868,.F.); +#51976 = ORIENTED_EDGE('',*,*,#51775,.T.); +#51977 = ORIENTED_EDGE('',*,*,#51978,.T.); +#51978 = EDGE_CURVE('',#51778,#51909,#51979,.T.); +#51979 = LINE('',#51980,#51981); +#51980 = CARTESIAN_POINT('',(-1.255,-0.8,0.)); +#51981 = VECTOR('',#51982,1.); +#51982 = DIRECTION('',(0.,1.,0.)); +#51983 = PLANE('',#51984); +#51984 = AXIS2_PLACEMENT_3D('',#51985,#51986,#51987); +#51985 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51986 = DIRECTION('',(0.,0.,1.)); +#51987 = DIRECTION('',(1.,0.,-0.)); +#51988 = ADVANCED_FACE('',(#51989),#52000,.T.); +#51989 = FACE_BOUND('',#51990,.T.); +#51990 = EDGE_LOOP('',(#51991,#51992,#51993,#51994)); +#51991 = ORIENTED_EDGE('',*,*,#51843,.T.); +#51992 = ORIENTED_EDGE('',*,*,#51978,.T.); +#51993 = ORIENTED_EDGE('',*,*,#51960,.F.); +#51994 = ORIENTED_EDGE('',*,*,#51995,.F.); +#51995 = EDGE_CURVE('',#51836,#51953,#51996,.T.); +#51996 = LINE('',#51997,#51998); +#51997 = CARTESIAN_POINT('',(-1.2,-0.8,5.5E-02)); +#51998 = VECTOR('',#51999,1.); +#51999 = DIRECTION('',(0.,1.,0.)); +#52000 = CYLINDRICAL_SURFACE('',#52001,5.5E-02); +#52001 = AXIS2_PLACEMENT_3D('',#52002,#52003,#52004); +#52002 = CARTESIAN_POINT('',(-1.255,-0.8,5.5E-02)); +#52003 = DIRECTION('',(0.,1.,0.)); +#52004 = DIRECTION('',(1.,0.,0.)); +#52005 = ADVANCED_FACE('',(#52006),#52049,.F.); +#52006 = FACE_BOUND('',#52007,.F.); +#52007 = EDGE_LOOP('',(#52008,#52009,#52010,#52011,#52019,#52027,#52035, + #52043)); +#52008 = ORIENTED_EDGE('',*,*,#51835,.F.); +#52009 = ORIENTED_EDGE('',*,*,#51827,.T.); +#52010 = ORIENTED_EDGE('',*,*,#51819,.T.); +#52011 = ORIENTED_EDGE('',*,*,#52012,.T.); +#52012 = EDGE_CURVE('',#51811,#52013,#52015,.T.); +#52013 = VERTEX_POINT('',#52014); +#52014 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52015 = LINE('',#52016,#52017); +#52016 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52017 = VECTOR('',#52018,1.); +#52018 = DIRECTION('',(1.,0.,0.)); +#52019 = ORIENTED_EDGE('',*,*,#52020,.T.); +#52020 = EDGE_CURVE('',#52013,#52021,#52023,.T.); +#52021 = VERTEX_POINT('',#52022); +#52022 = CARTESIAN_POINT('',(1.545,-0.8,0.495)); +#52023 = LINE('',#52024,#52025); +#52024 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#52025 = VECTOR('',#52026,1.); +#52026 = DIRECTION('',(1.,0.,0.)); +#52027 = ORIENTED_EDGE('',*,*,#52028,.F.); +#52028 = EDGE_CURVE('',#52029,#52021,#52031,.T.); +#52029 = VERTEX_POINT('',#52030); +#52030 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52031 = LINE('',#52032,#52033); +#52032 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52033 = VECTOR('',#52034,1.); +#52034 = DIRECTION('',(0.,0.,1.)); +#52035 = ORIENTED_EDGE('',*,*,#52036,.F.); +#52036 = EDGE_CURVE('',#52037,#52029,#52039,.T.); +#52037 = VERTEX_POINT('',#52038); +#52038 = CARTESIAN_POINT('',(1.2,-0.8,5.5E-02)); +#52039 = LINE('',#52040,#52041); +#52040 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52041 = VECTOR('',#52042,1.); +#52042 = DIRECTION('',(1.,0.,0.)); +#52043 = ORIENTED_EDGE('',*,*,#52044,.F.); +#52044 = EDGE_CURVE('',#51836,#52037,#52045,.T.); +#52045 = LINE('',#52046,#52047); +#52046 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52047 = VECTOR('',#52048,1.); +#52048 = DIRECTION('',(1.,0.,0.)); +#52049 = PLANE('',#52050); +#52050 = AXIS2_PLACEMENT_3D('',#52051,#52052,#52053); +#52051 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52052 = DIRECTION('',(0.,1.,0.)); +#52053 = DIRECTION('',(0.,-0.,1.)); +#52054 = ADVANCED_FACE('',(#52055),#52066,.T.); +#52055 = FACE_BOUND('',#52056,.T.); +#52056 = EDGE_LOOP('',(#52057,#52058,#52059,#52060)); +#52057 = ORIENTED_EDGE('',*,*,#51919,.F.); +#52058 = ORIENTED_EDGE('',*,*,#51884,.F.); +#52059 = ORIENTED_EDGE('',*,*,#51802,.T.); +#52060 = ORIENTED_EDGE('',*,*,#52061,.T.); +#52061 = EDGE_CURVE('',#51803,#51920,#52062,.T.); +#52062 = LINE('',#52063,#52064); +#52063 = CARTESIAN_POINT('',(-1.255,-0.8,0.55)); +#52064 = VECTOR('',#52065,1.); +#52065 = DIRECTION('',(0.,1.,0.)); +#52066 = PLANE('',#52067); +#52067 = AXIS2_PLACEMENT_3D('',#52068,#52069,#52070); +#52068 = CARTESIAN_POINT('',(-1.6,-0.8,0.55)); +#52069 = DIRECTION('',(0.,0.,1.)); +#52070 = DIRECTION('',(1.,0.,-0.)); +#52071 = ADVANCED_FACE('',(#52072),#52083,.T.); +#52072 = FACE_BOUND('',#52073,.T.); +#52073 = EDGE_LOOP('',(#52074,#52080,#52081,#52082)); +#52074 = ORIENTED_EDGE('',*,*,#52075,.T.); +#52075 = EDGE_CURVE('',#51811,#51928,#52076,.T.); +#52076 = LINE('',#52077,#52078); +#52077 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52078 = VECTOR('',#52079,1.); +#52079 = DIRECTION('',(0.,1.,0.)); +#52080 = ORIENTED_EDGE('',*,*,#51927,.T.); +#52081 = ORIENTED_EDGE('',*,*,#52061,.F.); +#52082 = ORIENTED_EDGE('',*,*,#51810,.F.); +#52083 = CYLINDRICAL_SURFACE('',#52084,5.5E-02); +#52084 = AXIS2_PLACEMENT_3D('',#52085,#52086,#52087); +#52085 = CARTESIAN_POINT('',(-1.255,-0.8,0.495)); +#52086 = DIRECTION('',(0.,1.,0.)); +#52087 = DIRECTION('',(1.,0.,0.)); +#52088 = ADVANCED_FACE('',(#52089),#52132,.T.); +#52089 = FACE_BOUND('',#52090,.T.); +#52090 = EDGE_LOOP('',(#52091,#52092,#52093,#52094,#52102,#52110,#52118, + #52126)); +#52091 = ORIENTED_EDGE('',*,*,#51952,.F.); +#52092 = ORIENTED_EDGE('',*,*,#51944,.T.); +#52093 = ORIENTED_EDGE('',*,*,#51936,.T.); +#52094 = ORIENTED_EDGE('',*,*,#52095,.T.); +#52095 = EDGE_CURVE('',#51928,#52096,#52098,.T.); +#52096 = VERTEX_POINT('',#52097); +#52097 = CARTESIAN_POINT('',(1.2,0.8,0.495)); +#52098 = LINE('',#52099,#52100); +#52099 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#52100 = VECTOR('',#52101,1.); +#52101 = DIRECTION('',(1.,0.,0.)); +#52102 = ORIENTED_EDGE('',*,*,#52103,.T.); +#52103 = EDGE_CURVE('',#52096,#52104,#52106,.T.); +#52104 = VERTEX_POINT('',#52105); +#52105 = CARTESIAN_POINT('',(1.545,0.8,0.495)); +#52106 = LINE('',#52107,#52108); +#52107 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#52108 = VECTOR('',#52109,1.); +#52109 = DIRECTION('',(1.,0.,0.)); +#52110 = ORIENTED_EDGE('',*,*,#52111,.F.); +#52111 = EDGE_CURVE('',#52112,#52104,#52114,.T.); +#52112 = VERTEX_POINT('',#52113); +#52113 = CARTESIAN_POINT('',(1.545,0.8,5.5E-02)); +#52114 = LINE('',#52115,#52116); +#52115 = CARTESIAN_POINT('',(1.545,0.8,5.5E-02)); +#52116 = VECTOR('',#52117,1.); +#52117 = DIRECTION('',(0.,0.,1.)); +#52118 = ORIENTED_EDGE('',*,*,#52119,.F.); +#52119 = EDGE_CURVE('',#52120,#52112,#52122,.T.); +#52120 = VERTEX_POINT('',#52121); +#52121 = CARTESIAN_POINT('',(1.2,0.8,5.5E-02)); +#52122 = LINE('',#52123,#52124); +#52123 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#52124 = VECTOR('',#52125,1.); +#52125 = DIRECTION('',(1.,0.,0.)); +#52126 = ORIENTED_EDGE('',*,*,#52127,.F.); +#52127 = EDGE_CURVE('',#51953,#52120,#52128,.T.); +#52128 = LINE('',#52129,#52130); +#52129 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#52130 = VECTOR('',#52131,1.); +#52131 = DIRECTION('',(1.,0.,0.)); +#52132 = PLANE('',#52133); +#52133 = AXIS2_PLACEMENT_3D('',#52134,#52135,#52136); +#52134 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#52135 = DIRECTION('',(0.,1.,0.)); +#52136 = DIRECTION('',(0.,-0.,1.)); +#52137 = ADVANCED_FACE('',(#52138),#52149,.F.); +#52138 = FACE_BOUND('',#52139,.F.); +#52139 = EDGE_LOOP('',(#52140,#52141,#52142,#52148)); +#52140 = ORIENTED_EDGE('',*,*,#51995,.F.); +#52141 = ORIENTED_EDGE('',*,*,#52044,.T.); +#52142 = ORIENTED_EDGE('',*,*,#52143,.T.); +#52143 = EDGE_CURVE('',#52037,#52120,#52144,.T.); +#52144 = LINE('',#52145,#52146); +#52145 = CARTESIAN_POINT('',(1.2,-0.8,5.5E-02)); +#52146 = VECTOR('',#52147,1.); +#52147 = DIRECTION('',(0.,1.,0.)); +#52148 = ORIENTED_EDGE('',*,*,#52127,.F.); +#52149 = PLANE('',#52150); +#52150 = AXIS2_PLACEMENT_3D('',#52151,#52152,#52153); +#52151 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52152 = DIRECTION('',(0.,0.,1.)); +#52153 = DIRECTION('',(1.,0.,-0.)); +#52154 = ADVANCED_FACE('',(#52155),#52218,.F.); +#52155 = FACE_BOUND('',#52156,.F.); +#52156 = EDGE_LOOP('',(#52157,#52167,#52174,#52175,#52176,#52177,#52186, + #52194,#52203,#52211)); +#52157 = ORIENTED_EDGE('',*,*,#52158,.F.); +#52158 = EDGE_CURVE('',#52159,#52161,#52163,.T.); +#52159 = VERTEX_POINT('',#52160); +#52160 = CARTESIAN_POINT('',(1.255,-0.8,0.)); +#52161 = VERTEX_POINT('',#52162); +#52162 = CARTESIAN_POINT('',(1.545,-0.8,0.)); +#52163 = LINE('',#52164,#52165); +#52164 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#52165 = VECTOR('',#52166,1.); +#52166 = DIRECTION('',(1.,0.,0.)); +#52167 = ORIENTED_EDGE('',*,*,#52168,.F.); +#52168 = EDGE_CURVE('',#52037,#52159,#52169,.T.); +#52169 = CIRCLE('',#52170,5.5E-02); +#52170 = AXIS2_PLACEMENT_3D('',#52171,#52172,#52173); +#52171 = CARTESIAN_POINT('',(1.255,-0.8,5.5E-02)); +#52172 = DIRECTION('',(0.,-1.,0.)); +#52173 = DIRECTION('',(0.,0.,1.)); +#52174 = ORIENTED_EDGE('',*,*,#52036,.T.); +#52175 = ORIENTED_EDGE('',*,*,#52028,.T.); +#52176 = ORIENTED_EDGE('',*,*,#52020,.F.); +#52177 = ORIENTED_EDGE('',*,*,#52178,.T.); +#52178 = EDGE_CURVE('',#52013,#52179,#52181,.T.); +#52179 = VERTEX_POINT('',#52180); +#52180 = CARTESIAN_POINT('',(1.255,-0.8,0.55)); +#52181 = CIRCLE('',#52182,5.5E-02); +#52182 = AXIS2_PLACEMENT_3D('',#52183,#52184,#52185); +#52183 = CARTESIAN_POINT('',(1.255,-0.8,0.495)); +#52184 = DIRECTION('',(0.,1.,0.)); +#52185 = DIRECTION('',(0.,-0.,1.)); +#52186 = ORIENTED_EDGE('',*,*,#52187,.T.); +#52187 = EDGE_CURVE('',#52179,#52188,#52190,.T.); +#52188 = VERTEX_POINT('',#52189); +#52189 = CARTESIAN_POINT('',(1.545,-0.8,0.55)); +#52190 = LINE('',#52191,#52192); +#52191 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52192 = VECTOR('',#52193,1.); +#52193 = DIRECTION('',(1.,0.,0.)); +#52194 = ORIENTED_EDGE('',*,*,#52195,.F.); +#52195 = EDGE_CURVE('',#52196,#52188,#52198,.T.); +#52196 = VERTEX_POINT('',#52197); +#52197 = CARTESIAN_POINT('',(1.6,-0.8,0.495)); +#52198 = CIRCLE('',#52199,5.5E-02); +#52199 = AXIS2_PLACEMENT_3D('',#52200,#52201,#52202); +#52200 = CARTESIAN_POINT('',(1.545,-0.8,0.495)); +#52201 = DIRECTION('',(0.,-1.,0.)); +#52202 = DIRECTION('',(0.,0.,1.)); +#52203 = ORIENTED_EDGE('',*,*,#52204,.F.); +#52204 = EDGE_CURVE('',#52205,#52196,#52207,.T.); +#52205 = VERTEX_POINT('',#52206); +#52206 = CARTESIAN_POINT('',(1.6,-0.8,5.5E-02)); +#52207 = LINE('',#52208,#52209); +#52208 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#52209 = VECTOR('',#52210,1.); +#52210 = DIRECTION('',(0.,0.,1.)); +#52211 = ORIENTED_EDGE('',*,*,#52212,.T.); +#52212 = EDGE_CURVE('',#52205,#52161,#52213,.T.); +#52213 = CIRCLE('',#52214,5.5E-02); +#52214 = AXIS2_PLACEMENT_3D('',#52215,#52216,#52217); +#52215 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52216 = DIRECTION('',(0.,1.,0.)); +#52217 = DIRECTION('',(0.,-0.,1.)); +#52218 = PLANE('',#52219); +#52219 = AXIS2_PLACEMENT_3D('',#52220,#52221,#52222); +#52220 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#52221 = DIRECTION('',(0.,1.,0.)); +#52222 = DIRECTION('',(0.,-0.,1.)); +#52223 = ADVANCED_FACE('',(#52224),#52249,.F.); +#52224 = FACE_BOUND('',#52225,.F.); +#52225 = EDGE_LOOP('',(#52226,#52227,#52235,#52243)); +#52226 = ORIENTED_EDGE('',*,*,#52012,.F.); +#52227 = ORIENTED_EDGE('',*,*,#52228,.T.); +#52228 = EDGE_CURVE('',#51811,#52229,#52231,.T.); +#52229 = VERTEX_POINT('',#52230); +#52230 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52231 = LINE('',#52232,#52233); +#52232 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52233 = VECTOR('',#52234,1.); +#52234 = DIRECTION('',(0.,0.,1.)); +#52235 = ORIENTED_EDGE('',*,*,#52236,.T.); +#52236 = EDGE_CURVE('',#52229,#52237,#52239,.T.); +#52237 = VERTEX_POINT('',#52238); +#52238 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52239 = LINE('',#52240,#52241); +#52240 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52241 = VECTOR('',#52242,1.); +#52242 = DIRECTION('',(1.,0.,0.)); +#52243 = ORIENTED_EDGE('',*,*,#52244,.F.); +#52244 = EDGE_CURVE('',#52013,#52237,#52245,.T.); +#52245 = LINE('',#52246,#52247); +#52246 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52247 = VECTOR('',#52248,1.); +#52248 = DIRECTION('',(0.,0.,1.)); +#52249 = PLANE('',#52250); +#52250 = AXIS2_PLACEMENT_3D('',#52251,#52252,#52253); +#52251 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52252 = DIRECTION('',(0.,1.,0.)); +#52253 = DIRECTION('',(0.,-0.,1.)); +#52254 = ADVANCED_FACE('',(#52255),#52273,.F.); +#52255 = FACE_BOUND('',#52256,.F.); +#52256 = EDGE_LOOP('',(#52257,#52258,#52259,#52267)); +#52257 = ORIENTED_EDGE('',*,*,#52228,.F.); +#52258 = ORIENTED_EDGE('',*,*,#52075,.T.); +#52259 = ORIENTED_EDGE('',*,*,#52260,.T.); +#52260 = EDGE_CURVE('',#51928,#52261,#52263,.T.); +#52261 = VERTEX_POINT('',#52262); +#52262 = CARTESIAN_POINT('',(-1.2,0.8,0.55)); +#52263 = LINE('',#52264,#52265); +#52264 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#52265 = VECTOR('',#52266,1.); +#52266 = DIRECTION('',(0.,0.,1.)); +#52267 = ORIENTED_EDGE('',*,*,#52268,.F.); +#52268 = EDGE_CURVE('',#52229,#52261,#52269,.T.); +#52269 = LINE('',#52270,#52271); +#52270 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52271 = VECTOR('',#52272,1.); +#52272 = DIRECTION('',(0.,1.,0.)); +#52273 = PLANE('',#52274); +#52274 = AXIS2_PLACEMENT_3D('',#52275,#52276,#52277); +#52275 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52276 = DIRECTION('',(1.,0.,0.)); +#52277 = DIRECTION('',(0.,0.,1.)); +#52278 = ADVANCED_FACE('',(#52279),#52342,.T.); +#52279 = FACE_BOUND('',#52280,.T.); +#52280 = EDGE_LOOP('',(#52281,#52291,#52298,#52299,#52300,#52301,#52310, + #52318,#52327,#52335)); +#52281 = ORIENTED_EDGE('',*,*,#52282,.F.); +#52282 = EDGE_CURVE('',#52283,#52285,#52287,.T.); +#52283 = VERTEX_POINT('',#52284); +#52284 = CARTESIAN_POINT('',(1.255,0.8,0.)); +#52285 = VERTEX_POINT('',#52286); +#52286 = CARTESIAN_POINT('',(1.545,0.8,0.)); +#52287 = LINE('',#52288,#52289); +#52288 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#52289 = VECTOR('',#52290,1.); +#52290 = DIRECTION('',(1.,0.,0.)); +#52291 = ORIENTED_EDGE('',*,*,#52292,.F.); +#52292 = EDGE_CURVE('',#52120,#52283,#52293,.T.); +#52293 = CIRCLE('',#52294,5.5E-02); +#52294 = AXIS2_PLACEMENT_3D('',#52295,#52296,#52297); +#52295 = CARTESIAN_POINT('',(1.255,0.8,5.5E-02)); +#52296 = DIRECTION('',(0.,-1.,0.)); +#52297 = DIRECTION('',(0.,0.,1.)); +#52298 = ORIENTED_EDGE('',*,*,#52119,.T.); +#52299 = ORIENTED_EDGE('',*,*,#52111,.T.); +#52300 = ORIENTED_EDGE('',*,*,#52103,.F.); +#52301 = ORIENTED_EDGE('',*,*,#52302,.T.); +#52302 = EDGE_CURVE('',#52096,#52303,#52305,.T.); +#52303 = VERTEX_POINT('',#52304); +#52304 = CARTESIAN_POINT('',(1.255,0.8,0.55)); +#52305 = CIRCLE('',#52306,5.5E-02); +#52306 = AXIS2_PLACEMENT_3D('',#52307,#52308,#52309); +#52307 = CARTESIAN_POINT('',(1.255,0.8,0.495)); +#52308 = DIRECTION('',(0.,1.,0.)); +#52309 = DIRECTION('',(0.,-0.,1.)); +#52310 = ORIENTED_EDGE('',*,*,#52311,.T.); +#52311 = EDGE_CURVE('',#52303,#52312,#52314,.T.); +#52312 = VERTEX_POINT('',#52313); +#52313 = CARTESIAN_POINT('',(1.545,0.8,0.55)); +#52314 = LINE('',#52315,#52316); +#52315 = CARTESIAN_POINT('',(1.2,0.8,0.55)); +#52316 = VECTOR('',#52317,1.); +#52317 = DIRECTION('',(1.,0.,0.)); +#52318 = ORIENTED_EDGE('',*,*,#52319,.F.); +#52319 = EDGE_CURVE('',#52320,#52312,#52322,.T.); +#52320 = VERTEX_POINT('',#52321); +#52321 = CARTESIAN_POINT('',(1.6,0.8,0.495)); +#52322 = CIRCLE('',#52323,5.5E-02); +#52323 = AXIS2_PLACEMENT_3D('',#52324,#52325,#52326); +#52324 = CARTESIAN_POINT('',(1.545,0.8,0.495)); +#52325 = DIRECTION('',(0.,-1.,0.)); +#52326 = DIRECTION('',(0.,0.,1.)); +#52327 = ORIENTED_EDGE('',*,*,#52328,.F.); +#52328 = EDGE_CURVE('',#52329,#52320,#52331,.T.); +#52329 = VERTEX_POINT('',#52330); +#52330 = CARTESIAN_POINT('',(1.6,0.8,5.5E-02)); +#52331 = LINE('',#52332,#52333); +#52332 = CARTESIAN_POINT('',(1.6,0.8,0.)); +#52333 = VECTOR('',#52334,1.); +#52334 = DIRECTION('',(0.,0.,1.)); +#52335 = ORIENTED_EDGE('',*,*,#52336,.T.); +#52336 = EDGE_CURVE('',#52329,#52285,#52337,.T.); +#52337 = CIRCLE('',#52338,5.5E-02); +#52338 = AXIS2_PLACEMENT_3D('',#52339,#52340,#52341); +#52339 = CARTESIAN_POINT('',(1.545,0.8,5.5E-02)); +#52340 = DIRECTION('',(0.,1.,0.)); +#52341 = DIRECTION('',(0.,-0.,1.)); +#52342 = PLANE('',#52343); +#52343 = AXIS2_PLACEMENT_3D('',#52344,#52345,#52346); +#52344 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#52345 = DIRECTION('',(0.,1.,0.)); +#52346 = DIRECTION('',(0.,-0.,1.)); +#52347 = ADVANCED_FACE('',(#52348),#52366,.T.); +#52348 = FACE_BOUND('',#52349,.T.); +#52349 = EDGE_LOOP('',(#52350,#52351,#52352,#52360)); +#52350 = ORIENTED_EDGE('',*,*,#52095,.F.); +#52351 = ORIENTED_EDGE('',*,*,#52260,.T.); +#52352 = ORIENTED_EDGE('',*,*,#52353,.T.); +#52353 = EDGE_CURVE('',#52261,#52354,#52356,.T.); +#52354 = VERTEX_POINT('',#52355); +#52355 = CARTESIAN_POINT('',(1.2,0.8,0.55)); +#52356 = LINE('',#52357,#52358); +#52357 = CARTESIAN_POINT('',(-1.2,0.8,0.55)); +#52358 = VECTOR('',#52359,1.); +#52359 = DIRECTION('',(1.,0.,0.)); +#52360 = ORIENTED_EDGE('',*,*,#52361,.F.); +#52361 = EDGE_CURVE('',#52096,#52354,#52362,.T.); +#52362 = LINE('',#52363,#52364); +#52363 = CARTESIAN_POINT('',(1.2,0.8,0.495)); +#52364 = VECTOR('',#52365,1.); +#52365 = DIRECTION('',(0.,0.,1.)); +#52366 = PLANE('',#52367); +#52367 = AXIS2_PLACEMENT_3D('',#52368,#52369,#52370); +#52368 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#52369 = DIRECTION('',(0.,1.,0.)); +#52370 = DIRECTION('',(0.,-0.,1.)); +#52371 = ADVANCED_FACE('',(#52372),#52383,.T.); +#52372 = FACE_BOUND('',#52373,.T.); +#52373 = EDGE_LOOP('',(#52374,#52375,#52376,#52382)); +#52374 = ORIENTED_EDGE('',*,*,#52143,.T.); +#52375 = ORIENTED_EDGE('',*,*,#52292,.T.); +#52376 = ORIENTED_EDGE('',*,*,#52377,.F.); +#52377 = EDGE_CURVE('',#52159,#52283,#52378,.T.); +#52378 = LINE('',#52379,#52380); +#52379 = CARTESIAN_POINT('',(1.255,-0.8,0.)); +#52380 = VECTOR('',#52381,1.); +#52381 = DIRECTION('',(0.,1.,0.)); +#52382 = ORIENTED_EDGE('',*,*,#52168,.F.); +#52383 = CYLINDRICAL_SURFACE('',#52384,5.5E-02); +#52384 = AXIS2_PLACEMENT_3D('',#52385,#52386,#52387); +#52385 = CARTESIAN_POINT('',(1.255,-0.8,5.5E-02)); +#52386 = DIRECTION('',(0.,1.,0.)); +#52387 = DIRECTION('',(-1.,0.,0.)); +#52388 = ADVANCED_FACE('',(#52389),#52400,.F.); +#52389 = FACE_BOUND('',#52390,.F.); +#52390 = EDGE_LOOP('',(#52391,#52392,#52393,#52394)); +#52391 = ORIENTED_EDGE('',*,*,#52282,.F.); +#52392 = ORIENTED_EDGE('',*,*,#52377,.F.); +#52393 = ORIENTED_EDGE('',*,*,#52158,.T.); +#52394 = ORIENTED_EDGE('',*,*,#52395,.T.); +#52395 = EDGE_CURVE('',#52161,#52285,#52396,.T.); +#52396 = LINE('',#52397,#52398); +#52397 = CARTESIAN_POINT('',(1.545,-0.8,0.)); +#52398 = VECTOR('',#52399,1.); +#52399 = DIRECTION('',(0.,1.,0.)); +#52400 = PLANE('',#52401); +#52401 = AXIS2_PLACEMENT_3D('',#52402,#52403,#52404); +#52402 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#52403 = DIRECTION('',(0.,0.,1.)); +#52404 = DIRECTION('',(1.,0.,-0.)); +#52405 = ADVANCED_FACE('',(#52406),#52417,.T.); +#52406 = FACE_BOUND('',#52407,.T.); +#52407 = EDGE_LOOP('',(#52408,#52409,#52410,#52411)); +#52408 = ORIENTED_EDGE('',*,*,#52212,.T.); +#52409 = ORIENTED_EDGE('',*,*,#52395,.T.); +#52410 = ORIENTED_EDGE('',*,*,#52336,.F.); +#52411 = ORIENTED_EDGE('',*,*,#52412,.F.); +#52412 = EDGE_CURVE('',#52205,#52329,#52413,.T.); +#52413 = LINE('',#52414,#52415); +#52414 = CARTESIAN_POINT('',(1.6,-0.8,5.5E-02)); +#52415 = VECTOR('',#52416,1.); +#52416 = DIRECTION('',(0.,1.,0.)); +#52417 = CYLINDRICAL_SURFACE('',#52418,5.5E-02); +#52418 = AXIS2_PLACEMENT_3D('',#52419,#52420,#52421); +#52419 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52420 = DIRECTION('',(0.,1.,0.)); +#52421 = DIRECTION('',(1.,0.,0.)); +#52422 = ADVANCED_FACE('',(#52423),#52434,.T.); +#52423 = FACE_BOUND('',#52424,.T.); +#52424 = EDGE_LOOP('',(#52425,#52426,#52427,#52428)); +#52425 = ORIENTED_EDGE('',*,*,#52204,.F.); +#52426 = ORIENTED_EDGE('',*,*,#52412,.T.); +#52427 = ORIENTED_EDGE('',*,*,#52328,.T.); +#52428 = ORIENTED_EDGE('',*,*,#52429,.F.); +#52429 = EDGE_CURVE('',#52196,#52320,#52430,.T.); +#52430 = LINE('',#52431,#52432); +#52431 = CARTESIAN_POINT('',(1.6,-0.8,0.495)); +#52432 = VECTOR('',#52433,1.); +#52433 = DIRECTION('',(0.,1.,0.)); +#52434 = PLANE('',#52435); +#52435 = AXIS2_PLACEMENT_3D('',#52436,#52437,#52438); +#52436 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#52437 = DIRECTION('',(1.,0.,0.)); +#52438 = DIRECTION('',(0.,0.,1.)); +#52439 = ADVANCED_FACE('',(#52440),#52451,.T.); +#52440 = FACE_BOUND('',#52441,.T.); +#52441 = EDGE_LOOP('',(#52442,#52443,#52444,#52450)); +#52442 = ORIENTED_EDGE('',*,*,#52429,.T.); +#52443 = ORIENTED_EDGE('',*,*,#52319,.T.); +#52444 = ORIENTED_EDGE('',*,*,#52445,.F.); +#52445 = EDGE_CURVE('',#52188,#52312,#52446,.T.); +#52446 = LINE('',#52447,#52448); +#52447 = CARTESIAN_POINT('',(1.545,-0.8,0.55)); +#52448 = VECTOR('',#52449,1.); +#52449 = DIRECTION('',(0.,1.,0.)); +#52450 = ORIENTED_EDGE('',*,*,#52195,.F.); +#52451 = CYLINDRICAL_SURFACE('',#52452,5.5E-02); +#52452 = AXIS2_PLACEMENT_3D('',#52453,#52454,#52455); +#52453 = CARTESIAN_POINT('',(1.545,-0.8,0.495)); +#52454 = DIRECTION('',(0.,1.,0.)); +#52455 = DIRECTION('',(1.,0.,0.)); +#52456 = ADVANCED_FACE('',(#52457),#52468,.T.); +#52457 = FACE_BOUND('',#52458,.T.); +#52458 = EDGE_LOOP('',(#52459,#52460,#52466,#52467)); +#52459 = ORIENTED_EDGE('',*,*,#52311,.F.); +#52460 = ORIENTED_EDGE('',*,*,#52461,.F.); +#52461 = EDGE_CURVE('',#52179,#52303,#52462,.T.); +#52462 = LINE('',#52463,#52464); +#52463 = CARTESIAN_POINT('',(1.255,-0.8,0.55)); +#52464 = VECTOR('',#52465,1.); +#52465 = DIRECTION('',(0.,1.,0.)); +#52466 = ORIENTED_EDGE('',*,*,#52187,.T.); +#52467 = ORIENTED_EDGE('',*,*,#52445,.T.); +#52468 = PLANE('',#52469); +#52469 = AXIS2_PLACEMENT_3D('',#52470,#52471,#52472); +#52470 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52471 = DIRECTION('',(0.,0.,1.)); +#52472 = DIRECTION('',(1.,0.,-0.)); +#52473 = ADVANCED_FACE('',(#52474),#52485,.T.); +#52474 = FACE_BOUND('',#52475,.T.); +#52475 = EDGE_LOOP('',(#52476,#52477,#52478,#52479)); +#52476 = ORIENTED_EDGE('',*,*,#52178,.T.); +#52477 = ORIENTED_EDGE('',*,*,#52461,.T.); +#52478 = ORIENTED_EDGE('',*,*,#52302,.F.); +#52479 = ORIENTED_EDGE('',*,*,#52480,.F.); +#52480 = EDGE_CURVE('',#52013,#52096,#52481,.T.); +#52481 = LINE('',#52482,#52483); +#52482 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52483 = VECTOR('',#52484,1.); +#52484 = DIRECTION('',(0.,1.,0.)); +#52485 = CYLINDRICAL_SURFACE('',#52486,5.5E-02); +#52486 = AXIS2_PLACEMENT_3D('',#52487,#52488,#52489); +#52487 = CARTESIAN_POINT('',(1.255,-0.8,0.495)); +#52488 = DIRECTION('',(0.,1.,0.)); +#52489 = DIRECTION('',(-1.,0.,0.)); +#52490 = ADVANCED_FACE('',(#52491),#52502,.T.); +#52491 = FACE_BOUND('',#52492,.T.); +#52492 = EDGE_LOOP('',(#52493,#52494,#52495,#52496)); +#52493 = ORIENTED_EDGE('',*,*,#52244,.F.); +#52494 = ORIENTED_EDGE('',*,*,#52480,.T.); +#52495 = ORIENTED_EDGE('',*,*,#52361,.T.); +#52496 = ORIENTED_EDGE('',*,*,#52497,.F.); +#52497 = EDGE_CURVE('',#52237,#52354,#52498,.T.); +#52498 = LINE('',#52499,#52500); +#52499 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52500 = VECTOR('',#52501,1.); +#52501 = DIRECTION('',(0.,1.,0.)); +#52502 = PLANE('',#52503); +#52503 = AXIS2_PLACEMENT_3D('',#52504,#52505,#52506); +#52504 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52505 = DIRECTION('',(1.,0.,0.)); +#52506 = DIRECTION('',(0.,0.,1.)); +#52507 = ADVANCED_FACE('',(#52508),#52514,.T.); +#52508 = FACE_BOUND('',#52509,.T.); +#52509 = EDGE_LOOP('',(#52510,#52511,#52512,#52513)); +#52510 = ORIENTED_EDGE('',*,*,#52268,.F.); +#52511 = ORIENTED_EDGE('',*,*,#52236,.T.); +#52512 = ORIENTED_EDGE('',*,*,#52497,.T.); +#52513 = ORIENTED_EDGE('',*,*,#52353,.F.); +#52514 = PLANE('',#52515); +#52515 = AXIS2_PLACEMENT_3D('',#52516,#52517,#52518); +#52516 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52517 = DIRECTION('',(0.,0.,1.)); +#52518 = DIRECTION('',(1.,0.,-0.)); +#52519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#52523)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#52520,#52521,#52522)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#52520 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#52521 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#52522 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#52523 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#52520, + 'distance_accuracy_value','confusion accuracy'); +#52524 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52525,#52527); +#52525 = ( REPRESENTATION_RELATIONSHIP('','',#51728,#51705) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52526) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52526 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51706); +#52527 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52528); +#52528 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','=>[0:1:1:29]','',#51700, + #51723,$); +#52529 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#51725)); +#52530 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52531,#52533); +#52531 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52532) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52532 = ITEM_DEFINED_TRANSFORMATION('','',#11,#123); +#52533 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52534); +#52534 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','Cu3','',#5,#14742,$); +#52535 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52536,#52538); +#52536 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52537) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52537 = ITEM_DEFINED_TRANSFORMATION('','',#11,#127); +#52538 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52539); +#52539 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','R3','',#5,#523,$); +#52540 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52541,#52543); +#52541 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52542) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52542 = ITEM_DEFINED_TRANSFORMATION('','',#11,#131); +#52543 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52544); +#52544 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','R60','',#5,#523,$); +#52545 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52546,#52548); +#52546 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52547) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52547 = ITEM_DEFINED_TRANSFORMATION('','',#11,#135); +#52548 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52549); +#52549 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','Rdfu','',#5,#523,$); +#52550 = SHAPE_DEFINITION_REPRESENTATION(#52551,#52557); +#52551 = PRODUCT_DEFINITION_SHAPE('','',#52552); +#52552 = PRODUCT_DEFINITION('design','',#52553,#52556); +#52553 = PRODUCT_DEFINITION_FORMATION('','',#52554); +#52554 = PRODUCT('D_SMB','D_SMB','',(#52555)); +#52555 = PRODUCT_CONTEXT('',#2,'mechanical'); +#52556 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#52557 = SHAPE_REPRESENTATION('',(#11,#52558),#52562); +#52558 = AXIS2_PLACEMENT_3D('',#52559,#52560,#52561); +#52559 = CARTESIAN_POINT('',(0.,0.,0.)); +#52560 = DIRECTION('',(0.,0.,1.)); +#52561 = DIRECTION('',(1.,0.,-0.)); +#52562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#52566)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#52563,#52564,#52565)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#52563 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#52564 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#52565 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#52566 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#52563, + 'distance_accuracy_value','confusion accuracy'); +#52567 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52568,#52570); +#52568 = ( REPRESENTATION_RELATIONSHIP('','',#52557,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52569) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52569 = ITEM_DEFINED_TRANSFORMATION('','',#11,#139); +#52570 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52571); +#52571 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','D10','',#5,#52552,$); +#52572 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#52554)); +#52573 = SHAPE_DEFINITION_REPRESENTATION(#52574,#52580); +#52574 = PRODUCT_DEFINITION_SHAPE('','',#52575); +#52575 = PRODUCT_DEFINITION('design','',#52576,#52579); +#52576 = PRODUCT_DEFINITION_FORMATION('','',#52577); +#52577 = PRODUCT('D_SMB','D_SMB','',(#52578)); +#52578 = PRODUCT_CONTEXT('',#2,'mechanical'); +#52579 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#52580 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#52581),#53789); +#52581 = MANIFOLD_SOLID_BREP('',#52582); +#52582 = CLOSED_SHELL('',(#52583,#52623,#52706,#52731,#52806,#52823, + #52840,#52857,#52874,#52891,#52907,#52954,#52989,#53028,#53057, + #53096,#53125,#53179,#53222,#53245,#53268,#53291,#53342,#53365, + #53382,#53456,#53480,#53547,#53559,#53571,#53588,#53617,#53640, + #53663,#53680,#53702,#53714,#53731,#53748,#53765,#53777)); +#52583 = ADVANCED_FACE('',(#52584),#52618,.T.); +#52584 = FACE_BOUND('',#52585,.T.); +#52585 = EDGE_LOOP('',(#52586,#52596,#52604,#52612)); +#52586 = ORIENTED_EDGE('',*,*,#52587,.T.); +#52587 = EDGE_CURVE('',#52588,#52590,#52592,.T.); +#52588 = VERTEX_POINT('',#52589); +#52589 = CARTESIAN_POINT('',(1.4,1.,0.)); +#52590 = VERTEX_POINT('',#52591); +#52591 = CARTESIAN_POINT('',(2.503333333333,1.,-2.775557561563E-17)); +#52592 = LINE('',#52593,#52594); +#52593 = CARTESIAN_POINT('',(2.43,1.,0.)); +#52594 = VECTOR('',#52595,1.); +#52595 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52596 = ORIENTED_EDGE('',*,*,#52597,.T.); +#52597 = EDGE_CURVE('',#52590,#52598,#52600,.T.); +#52598 = VERTEX_POINT('',#52599); +#52599 = CARTESIAN_POINT('',(2.503333333333,-1.,-2.775557561563E-17)); +#52600 = LINE('',#52601,#52602); +#52601 = CARTESIAN_POINT('',(2.503333333333,1.,-2.775557561563E-17)); +#52602 = VECTOR('',#52603,1.); +#52603 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52604 = ORIENTED_EDGE('',*,*,#52605,.T.); +#52605 = EDGE_CURVE('',#52598,#52606,#52608,.T.); +#52606 = VERTEX_POINT('',#52607); +#52607 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52608 = LINE('',#52609,#52610); +#52609 = CARTESIAN_POINT('',(2.43,-1.,0.)); +#52610 = VECTOR('',#52611,1.); +#52611 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52612 = ORIENTED_EDGE('',*,*,#52613,.T.); +#52613 = EDGE_CURVE('',#52606,#52588,#52614,.T.); +#52614 = LINE('',#52615,#52616); +#52615 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52616 = VECTOR('',#52617,1.); +#52617 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52618 = PLANE('',#52619); +#52619 = AXIS2_PLACEMENT_3D('',#52620,#52621,#52622); +#52620 = CARTESIAN_POINT('',(1.951666666667,-6.30120533068E-16, + -8.943794505573E-18)); +#52621 = DIRECTION('',(-1.696061518107E-17,5.165776572619E-33,-1.)); +#52622 = DIRECTION('',(1.,-2.22044604925E-16,-1.696061518107E-17)); +#52623 = ADVANCED_FACE('',(#52624),#52701,.T.); +#52624 = FACE_BOUND('',#52625,.T.); +#52625 = EDGE_LOOP('',(#52626,#52636,#52643,#52644,#52652,#52660,#52670, + #52678,#52686,#52694)); +#52626 = ORIENTED_EDGE('',*,*,#52627,.F.); +#52627 = EDGE_CURVE('',#52628,#52630,#52632,.T.); +#52628 = VERTEX_POINT('',#52629); +#52629 = CARTESIAN_POINT('',(2.65,1.,0.146666666667)); +#52630 = VERTEX_POINT('',#52631); +#52631 = CARTESIAN_POINT('',(2.65,1.,0.811158333333)); +#52632 = LINE('',#52633,#52634); +#52633 = CARTESIAN_POINT('',(2.65,1.,0.)); +#52634 = VECTOR('',#52635,1.); +#52635 = DIRECTION('',(0.,0.,1.)); +#52636 = ORIENTED_EDGE('',*,*,#52637,.T.); +#52637 = EDGE_CURVE('',#52628,#52590,#52638,.T.); +#52638 = CIRCLE('',#52639,0.146666666667); +#52639 = AXIS2_PLACEMENT_3D('',#52640,#52641,#52642); +#52640 = CARTESIAN_POINT('',(2.503333333333,1.,0.146666666667)); +#52641 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#52642 = DIRECTION('',(0.,0.,1.)); +#52643 = ORIENTED_EDGE('',*,*,#52587,.F.); +#52644 = ORIENTED_EDGE('',*,*,#52645,.T.); +#52645 = EDGE_CURVE('',#52588,#52646,#52648,.T.); +#52646 = VERTEX_POINT('',#52647); +#52647 = CARTESIAN_POINT('',(1.4,1.,0.22)); +#52648 = LINE('',#52649,#52650); +#52649 = CARTESIAN_POINT('',(1.4,1.,0.)); +#52650 = VECTOR('',#52651,1.); +#52651 = DIRECTION('',(0.,0.,1.)); +#52652 = ORIENTED_EDGE('',*,*,#52653,.F.); +#52653 = EDGE_CURVE('',#52654,#52646,#52656,.T.); +#52654 = VERTEX_POINT('',#52655); +#52655 = CARTESIAN_POINT('',(2.37747286303,1.,0.22)); +#52656 = LINE('',#52657,#52658); +#52657 = CARTESIAN_POINT('',(2.279656881469,1.,0.22)); +#52658 = VECTOR('',#52659,1.); +#52659 = DIRECTION('',(-1.,3.208039609213E-16,0.)); +#52660 = ORIENTED_EDGE('',*,*,#52661,.T.); +#52661 = EDGE_CURVE('',#52654,#52662,#52664,.T.); +#52662 = VERTEX_POINT('',#52663); +#52663 = CARTESIAN_POINT('',(2.377627457948,1.,0.2222)); +#52664 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#52665,#52666,#52667,#52668, + #52669),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52665 = CARTESIAN_POINT('',(2.37747286303,1.,0.22)); +#52666 = CARTESIAN_POINT('',(2.390434471179,1.,0.40445326836)); +#52667 = CARTESIAN_POINT('',(2.403396226036,1.,0.588908624477)); +#52668 = CARTESIAN_POINT('',(2.416358116612,1.,0.773365911976)); +#52669 = CARTESIAN_POINT('',(2.429320133712,1.,0.957825)); +#52670 = ORIENTED_EDGE('',*,*,#52671,.T.); +#52671 = EDGE_CURVE('',#52662,#52672,#52674,.T.); +#52672 = VERTEX_POINT('',#52673); +#52673 = CARTESIAN_POINT('',(2.43,1.,0.2222)); +#52674 = LINE('',#52675,#52676); +#52675 = CARTESIAN_POINT('',(1.4,1.,0.2222)); +#52676 = VECTOR('',#52677,1.); +#52677 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52678 = ORIENTED_EDGE('',*,*,#52679,.T.); +#52679 = EDGE_CURVE('',#52672,#52680,#52682,.T.); +#52680 = VERTEX_POINT('',#52681); +#52681 = CARTESIAN_POINT('',(2.43,1.,0.957825)); +#52682 = LINE('',#52683,#52684); +#52683 = CARTESIAN_POINT('',(2.43,1.,0.)); +#52684 = VECTOR('',#52685,1.); +#52685 = DIRECTION('',(0.,0.,1.)); +#52686 = ORIENTED_EDGE('',*,*,#52687,.T.); +#52687 = EDGE_CURVE('',#52680,#52688,#52690,.T.); +#52688 = VERTEX_POINT('',#52689); +#52689 = CARTESIAN_POINT('',(2.503333333333,1.,0.957825)); +#52690 = LINE('',#52691,#52692); +#52691 = CARTESIAN_POINT('',(2.43,1.,0.957825)); +#52692 = VECTOR('',#52693,1.); +#52693 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52694 = ORIENTED_EDGE('',*,*,#52695,.F.); +#52695 = EDGE_CURVE('',#52630,#52688,#52696,.T.); +#52696 = CIRCLE('',#52697,0.146666666667); +#52697 = AXIS2_PLACEMENT_3D('',#52698,#52699,#52700); +#52698 = CARTESIAN_POINT('',(2.503333333333,1.,0.811158333333)); +#52699 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52700 = DIRECTION('',(0.,0.,1.)); +#52701 = PLANE('',#52702); +#52702 = AXIS2_PLACEMENT_3D('',#52703,#52704,#52705); +#52703 = CARTESIAN_POINT('',(2.181840899909,1.,0.302067385793)); +#52704 = DIRECTION('',(3.208039609213E-16,1.,-3.455687485119E-18)); +#52705 = DIRECTION('',(-1.,3.208039609213E-16,5.860333545794E-50)); +#52706 = ADVANCED_FACE('',(#52707),#52726,.T.); +#52707 = FACE_BOUND('',#52708,.T.); +#52708 = EDGE_LOOP('',(#52709,#52717,#52724,#52725)); +#52709 = ORIENTED_EDGE('',*,*,#52710,.T.); +#52710 = EDGE_CURVE('',#52628,#52711,#52713,.T.); +#52711 = VERTEX_POINT('',#52712); +#52712 = CARTESIAN_POINT('',(2.65,-1.,0.146666666667)); +#52713 = LINE('',#52714,#52715); +#52714 = CARTESIAN_POINT('',(2.65,1.,0.146666666667)); +#52715 = VECTOR('',#52716,1.); +#52716 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52717 = ORIENTED_EDGE('',*,*,#52718,.T.); +#52718 = EDGE_CURVE('',#52711,#52598,#52719,.T.); +#52719 = CIRCLE('',#52720,0.146666666667); +#52720 = AXIS2_PLACEMENT_3D('',#52721,#52722,#52723); +#52721 = CARTESIAN_POINT('',(2.503333333333,-1.,0.146666666667)); +#52722 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#52723 = DIRECTION('',(0.,0.,1.)); +#52724 = ORIENTED_EDGE('',*,*,#52597,.F.); +#52725 = ORIENTED_EDGE('',*,*,#52637,.F.); +#52726 = CYLINDRICAL_SURFACE('',#52727,0.146666666667); +#52727 = AXIS2_PLACEMENT_3D('',#52728,#52729,#52730); +#52728 = CARTESIAN_POINT('',(2.503333333333,1.,0.146666666667)); +#52729 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52730 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52731 = ADVANCED_FACE('',(#52732),#52801,.T.); +#52732 = FACE_BOUND('',#52733,.T.); +#52733 = EDGE_LOOP('',(#52734,#52735,#52743,#52752,#52760,#52768,#52776, + #52786,#52794,#52800)); +#52734 = ORIENTED_EDGE('',*,*,#52718,.F.); +#52735 = ORIENTED_EDGE('',*,*,#52736,.T.); +#52736 = EDGE_CURVE('',#52711,#52737,#52739,.T.); +#52737 = VERTEX_POINT('',#52738); +#52738 = CARTESIAN_POINT('',(2.65,-1.,0.811158333333)); +#52739 = LINE('',#52740,#52741); +#52740 = CARTESIAN_POINT('',(2.65,-1.,0.)); +#52741 = VECTOR('',#52742,1.); +#52742 = DIRECTION('',(0.,0.,1.)); +#52743 = ORIENTED_EDGE('',*,*,#52744,.T.); +#52744 = EDGE_CURVE('',#52737,#52745,#52747,.T.); +#52745 = VERTEX_POINT('',#52746); +#52746 = CARTESIAN_POINT('',(2.503333333333,-1.,0.957825)); +#52747 = CIRCLE('',#52748,0.146666666667); +#52748 = AXIS2_PLACEMENT_3D('',#52749,#52750,#52751); +#52749 = CARTESIAN_POINT('',(2.503333333333,-1.,0.811158333333)); +#52750 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52751 = DIRECTION('',(0.,0.,1.)); +#52752 = ORIENTED_EDGE('',*,*,#52753,.T.); +#52753 = EDGE_CURVE('',#52745,#52754,#52756,.T.); +#52754 = VERTEX_POINT('',#52755); +#52755 = CARTESIAN_POINT('',(2.43,-1.,0.957825)); +#52756 = LINE('',#52757,#52758); +#52757 = CARTESIAN_POINT('',(2.65,-1.,0.957825)); +#52758 = VECTOR('',#52759,1.); +#52759 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52760 = ORIENTED_EDGE('',*,*,#52761,.F.); +#52761 = EDGE_CURVE('',#52762,#52754,#52764,.T.); +#52762 = VERTEX_POINT('',#52763); +#52763 = CARTESIAN_POINT('',(2.43,-1.,0.2222)); +#52764 = LINE('',#52765,#52766); +#52765 = CARTESIAN_POINT('',(2.43,-1.,0.)); +#52766 = VECTOR('',#52767,1.); +#52767 = DIRECTION('',(0.,0.,1.)); +#52768 = ORIENTED_EDGE('',*,*,#52769,.T.); +#52769 = EDGE_CURVE('',#52762,#52770,#52772,.T.); +#52770 = VERTEX_POINT('',#52771); +#52771 = CARTESIAN_POINT('',(2.377627457948,-1.,0.2222)); +#52772 = LINE('',#52773,#52774); +#52773 = CARTESIAN_POINT('',(2.43,-1.,0.2222)); +#52774 = VECTOR('',#52775,1.); +#52775 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52776 = ORIENTED_EDGE('',*,*,#52777,.F.); +#52777 = EDGE_CURVE('',#52778,#52770,#52780,.T.); +#52778 = VERTEX_POINT('',#52779); +#52779 = CARTESIAN_POINT('',(2.37747286303,-1.,0.22)); +#52780 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#52781,#52782,#52783,#52784, + #52785),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52781 = CARTESIAN_POINT('',(2.37747286303,-1.,0.22)); +#52782 = CARTESIAN_POINT('',(2.390434471179,-1.,0.40445326836)); +#52783 = CARTESIAN_POINT('',(2.403396226036,-1.,0.588908624477)); +#52784 = CARTESIAN_POINT('',(2.416358116612,-1.,0.773365911976)); +#52785 = CARTESIAN_POINT('',(2.429320133712,-1.,0.957825)); +#52786 = ORIENTED_EDGE('',*,*,#52787,.F.); +#52787 = EDGE_CURVE('',#52788,#52778,#52790,.T.); +#52788 = VERTEX_POINT('',#52789); +#52789 = CARTESIAN_POINT('',(1.4,-1.,0.22)); +#52790 = LINE('',#52791,#52792); +#52791 = CARTESIAN_POINT('',(2.279656881469,-1.,0.22)); +#52792 = VECTOR('',#52793,1.); +#52793 = DIRECTION('',(1.,-5.837911398703E-16,-0.)); +#52794 = ORIENTED_EDGE('',*,*,#52795,.F.); +#52795 = EDGE_CURVE('',#52606,#52788,#52796,.T.); +#52796 = LINE('',#52797,#52798); +#52797 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52798 = VECTOR('',#52799,1.); +#52799 = DIRECTION('',(0.,0.,1.)); +#52800 = ORIENTED_EDGE('',*,*,#52605,.F.); +#52801 = PLANE('',#52802); +#52802 = AXIS2_PLACEMENT_3D('',#52803,#52804,#52805); +#52803 = CARTESIAN_POINT('',(2.181840899909,-1.,0.302067385793)); +#52804 = DIRECTION('',(-5.837911398703E-16,-1.,3.048681254865E-17)); +#52805 = DIRECTION('',(1.,-5.837911398703E-16,1.10819467531E-48)); +#52806 = ADVANCED_FACE('',(#52807),#52818,.T.); +#52807 = FACE_BOUND('',#52808,.T.); +#52808 = EDGE_LOOP('',(#52809,#52810,#52811,#52817)); +#52809 = ORIENTED_EDGE('',*,*,#52613,.F.); +#52810 = ORIENTED_EDGE('',*,*,#52795,.T.); +#52811 = ORIENTED_EDGE('',*,*,#52812,.F.); +#52812 = EDGE_CURVE('',#52646,#52788,#52813,.T.); +#52813 = LINE('',#52814,#52815); +#52814 = CARTESIAN_POINT('',(1.4,-1.361236431515,0.22)); +#52815 = VECTOR('',#52816,1.); +#52816 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52817 = ORIENTED_EDGE('',*,*,#52645,.F.); +#52818 = PLANE('',#52819); +#52819 = AXIS2_PLACEMENT_3D('',#52820,#52821,#52822); +#52820 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52821 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52822 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52823 = ADVANCED_FACE('',(#52824),#52835,.T.); +#52824 = FACE_BOUND('',#52825,.T.); +#52825 = EDGE_LOOP('',(#52826,#52827,#52833,#52834)); +#52826 = ORIENTED_EDGE('',*,*,#52627,.T.); +#52827 = ORIENTED_EDGE('',*,*,#52828,.T.); +#52828 = EDGE_CURVE('',#52630,#52737,#52829,.T.); +#52829 = LINE('',#52830,#52831); +#52830 = CARTESIAN_POINT('',(2.65,1.,0.811158333333)); +#52831 = VECTOR('',#52832,1.); +#52832 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52833 = ORIENTED_EDGE('',*,*,#52736,.F.); +#52834 = ORIENTED_EDGE('',*,*,#52710,.F.); +#52835 = PLANE('',#52836); +#52836 = AXIS2_PLACEMENT_3D('',#52837,#52838,#52839); +#52837 = CARTESIAN_POINT('',(2.65,1.,0.)); +#52838 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52839 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52840 = ADVANCED_FACE('',(#52841),#52852,.T.); +#52841 = FACE_BOUND('',#52842,.T.); +#52842 = EDGE_LOOP('',(#52843,#52844,#52850,#52851)); +#52843 = ORIENTED_EDGE('',*,*,#52695,.T.); +#52844 = ORIENTED_EDGE('',*,*,#52845,.T.); +#52845 = EDGE_CURVE('',#52688,#52745,#52846,.T.); +#52846 = LINE('',#52847,#52848); +#52847 = CARTESIAN_POINT('',(2.503333333333,1.,0.957825)); +#52848 = VECTOR('',#52849,1.); +#52849 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52850 = ORIENTED_EDGE('',*,*,#52744,.F.); +#52851 = ORIENTED_EDGE('',*,*,#52828,.F.); +#52852 = CYLINDRICAL_SURFACE('',#52853,0.146666666667); +#52853 = AXIS2_PLACEMENT_3D('',#52854,#52855,#52856); +#52854 = CARTESIAN_POINT('',(2.503333333333,1.,0.811158333333)); +#52855 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52856 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52857 = ADVANCED_FACE('',(#52858),#52869,.F.); +#52858 = FACE_BOUND('',#52859,.F.); +#52859 = EDGE_LOOP('',(#52860,#52861,#52862,#52863)); +#52860 = ORIENTED_EDGE('',*,*,#52687,.T.); +#52861 = ORIENTED_EDGE('',*,*,#52845,.T.); +#52862 = ORIENTED_EDGE('',*,*,#52753,.T.); +#52863 = ORIENTED_EDGE('',*,*,#52864,.T.); +#52864 = EDGE_CURVE('',#52754,#52680,#52865,.T.); +#52865 = LINE('',#52866,#52867); +#52866 = CARTESIAN_POINT('',(2.43,-1.,0.957825)); +#52867 = VECTOR('',#52868,1.); +#52868 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52869 = PLANE('',#52870); +#52870 = AXIS2_PLACEMENT_3D('',#52871,#52872,#52873); +#52871 = CARTESIAN_POINT('',(2.54,-8.881784197001E-16,0.957825)); +#52872 = DIRECTION('',(0.,0.,-1.)); +#52873 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52874 = ADVANCED_FACE('',(#52875),#52886,.T.); +#52875 = FACE_BOUND('',#52876,.T.); +#52876 = EDGE_LOOP('',(#52877,#52883,#52884,#52885)); +#52877 = ORIENTED_EDGE('',*,*,#52878,.T.); +#52878 = EDGE_CURVE('',#52672,#52762,#52879,.T.); +#52879 = LINE('',#52880,#52881); +#52880 = CARTESIAN_POINT('',(2.43,1.,0.2222)); +#52881 = VECTOR('',#52882,1.); +#52882 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52883 = ORIENTED_EDGE('',*,*,#52761,.T.); +#52884 = ORIENTED_EDGE('',*,*,#52864,.T.); +#52885 = ORIENTED_EDGE('',*,*,#52679,.F.); +#52886 = PLANE('',#52887); +#52887 = AXIS2_PLACEMENT_3D('',#52888,#52889,#52890); +#52888 = CARTESIAN_POINT('',(2.43,-1.,0.)); +#52889 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52890 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52891 = ADVANCED_FACE('',(#52892),#52902,.F.); +#52892 = FACE_BOUND('',#52893,.F.); +#52893 = EDGE_LOOP('',(#52894,#52899,#52900,#52901)); +#52894 = ORIENTED_EDGE('',*,*,#52895,.F.); +#52895 = EDGE_CURVE('',#52662,#52770,#52896,.T.); +#52896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52897,#52898),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52897 = CARTESIAN_POINT('',(2.377627457948,1.,0.2222)); +#52898 = CARTESIAN_POINT('',(2.377627457948,-1.,0.2222)); +#52899 = ORIENTED_EDGE('',*,*,#52671,.T.); +#52900 = ORIENTED_EDGE('',*,*,#52878,.T.); +#52901 = ORIENTED_EDGE('',*,*,#52769,.T.); +#52902 = PLANE('',#52903); +#52903 = AXIS2_PLACEMENT_3D('',#52904,#52905,#52906); +#52904 = CARTESIAN_POINT('',(1.915,-6.661338147751E-16,0.2222)); +#52905 = DIRECTION('',(0.,0.,-1.)); +#52906 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52907 = ADVANCED_FACE('',(#52908),#52949,.T.); +#52908 = FACE_BOUND('',#52909,.T.); +#52909 = EDGE_LOOP('',(#52910,#52919,#52925,#52926,#52927,#52928,#52936, + #52943)); +#52910 = ORIENTED_EDGE('',*,*,#52911,.F.); +#52911 = EDGE_CURVE('',#52912,#52914,#52916,.T.); +#52912 = VERTEX_POINT('',#52913); +#52913 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52914 = VERTEX_POINT('',#52915); +#52915 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52916 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52917,#52918),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52917 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52918 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52919 = ORIENTED_EDGE('',*,*,#52920,.T.); +#52920 = EDGE_CURVE('',#52912,#52778,#52921,.T.); +#52921 = LINE('',#52922,#52923); +#52922 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52923 = VECTOR('',#52924,1.); +#52924 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52925 = ORIENTED_EDGE('',*,*,#52777,.T.); +#52926 = ORIENTED_EDGE('',*,*,#52895,.F.); +#52927 = ORIENTED_EDGE('',*,*,#52661,.F.); +#52928 = ORIENTED_EDGE('',*,*,#52929,.T.); +#52929 = EDGE_CURVE('',#52654,#52930,#52932,.T.); +#52930 = VERTEX_POINT('',#52931); +#52931 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52932 = LINE('',#52933,#52934); +#52933 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52934 = VECTOR('',#52935,1.); +#52935 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52936 = ORIENTED_EDGE('',*,*,#52937,.T.); +#52937 = EDGE_CURVE('',#52930,#52938,#52940,.T.); +#52938 = VERTEX_POINT('',#52939); +#52939 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#52940 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52941,#52942),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52941 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52942 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#52943 = ORIENTED_EDGE('',*,*,#52944,.F.); +#52944 = EDGE_CURVE('',#52914,#52938,#52945,.T.); +#52945 = LINE('',#52946,#52947); +#52946 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52947 = VECTOR('',#52948,1.); +#52948 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52949 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#52950,#52951) + ,(#52952,#52953 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52950 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52951 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52952 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52953 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#52954 = ADVANCED_FACE('',(#52955),#52984,.T.); +#52955 = FACE_BOUND('',#52956,.T.); +#52956 = EDGE_LOOP('',(#52957,#52958,#52966,#52974,#52980,#52981,#52982, + #52983)); +#52957 = ORIENTED_EDGE('',*,*,#52920,.F.); +#52958 = ORIENTED_EDGE('',*,*,#52959,.F.); +#52959 = EDGE_CURVE('',#52960,#52912,#52962,.T.); +#52960 = VERTEX_POINT('',#52961); +#52961 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#52962 = LINE('',#52963,#52964); +#52963 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#52964 = VECTOR('',#52965,1.); +#52965 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#52966 = ORIENTED_EDGE('',*,*,#52967,.T.); +#52967 = EDGE_CURVE('',#52960,#52968,#52970,.T.); +#52968 = VERTEX_POINT('',#52969); +#52969 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#52970 = LINE('',#52971,#52972); +#52971 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#52972 = VECTOR('',#52973,1.); +#52973 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52974 = ORIENTED_EDGE('',*,*,#52975,.F.); +#52975 = EDGE_CURVE('',#52930,#52968,#52976,.T.); +#52976 = LINE('',#52977,#52978); +#52977 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52978 = VECTOR('',#52979,1.); +#52979 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#52980 = ORIENTED_EDGE('',*,*,#52929,.F.); +#52981 = ORIENTED_EDGE('',*,*,#52653,.T.); +#52982 = ORIENTED_EDGE('',*,*,#52812,.T.); +#52983 = ORIENTED_EDGE('',*,*,#52787,.T.); +#52984 = PLANE('',#52985); +#52985 = AXIS2_PLACEMENT_3D('',#52986,#52987,#52988); +#52986 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52987 = DIRECTION('',(0.,0.,-1.)); +#52988 = DIRECTION('',(-0.809803822742,0.586700748825,0.)); +#52989 = ADVANCED_FACE('',(#52990),#53023,.T.); +#52990 = FACE_BOUND('',#52991,.T.); +#52991 = EDGE_LOOP('',(#52992,#53002,#53008,#53009,#53010,#53018)); +#52992 = ORIENTED_EDGE('',*,*,#52993,.T.); +#52993 = EDGE_CURVE('',#52994,#52996,#52998,.T.); +#52994 = VERTEX_POINT('',#52995); +#52995 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#52996 = VERTEX_POINT('',#52997); +#52997 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#52998 = LINE('',#52999,#53000); +#52999 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53000 = VECTOR('',#53001,1.); +#53001 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53002 = ORIENTED_EDGE('',*,*,#53003,.T.); +#53003 = EDGE_CURVE('',#52996,#52960,#53004,.T.); +#53004 = LINE('',#53005,#53006); +#53005 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53006 = VECTOR('',#53007,1.); +#53007 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53008 = ORIENTED_EDGE('',*,*,#52959,.T.); +#53009 = ORIENTED_EDGE('',*,*,#52911,.T.); +#53010 = ORIENTED_EDGE('',*,*,#53011,.F.); +#53011 = EDGE_CURVE('',#53012,#52914,#53014,.T.); +#53012 = VERTEX_POINT('',#53013); +#53013 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53014 = LINE('',#53015,#53016); +#53015 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53016 = VECTOR('',#53017,1.); +#53017 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53018 = ORIENTED_EDGE('',*,*,#53019,.F.); +#53019 = EDGE_CURVE('',#52994,#53012,#53020,.T.); +#53020 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53021,#53022),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53021 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53022 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53023 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53024,#53025) + ,(#53026,#53027 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53024 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53025 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53026 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#53027 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53028 = ADVANCED_FACE('',(#53029),#53052,.T.); +#53029 = FACE_BOUND('',#53030,.T.); +#53030 = EDGE_LOOP('',(#53031,#53032,#53039,#53047)); +#53031 = ORIENTED_EDGE('',*,*,#52944,.T.); +#53032 = ORIENTED_EDGE('',*,*,#53033,.T.); +#53033 = EDGE_CURVE('',#52938,#53034,#53036,.T.); +#53034 = VERTEX_POINT('',#53035); +#53035 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53036 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53037,#53038),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53037 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53038 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53039 = ORIENTED_EDGE('',*,*,#53040,.F.); +#53040 = EDGE_CURVE('',#53041,#53034,#53043,.T.); +#53041 = VERTEX_POINT('',#53042); +#53042 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53043 = LINE('',#53044,#53045); +#53044 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53045 = VECTOR('',#53046,1.); +#53046 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53047 = ORIENTED_EDGE('',*,*,#53048,.F.); +#53048 = EDGE_CURVE('',#52914,#53041,#53049,.T.); +#53049 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53050,#53051),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53050 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53051 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53052 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53053,#53054) + ,(#53055,#53056 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53053 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53054 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53055 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53056 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53057 = ADVANCED_FACE('',(#53058),#53091,.T.); +#53058 = FACE_BOUND('',#53059,.T.); +#53059 = EDGE_LOOP('',(#53060,#53061,#53069,#53077,#53084,#53090)); +#53060 = ORIENTED_EDGE('',*,*,#52975,.T.); +#53061 = ORIENTED_EDGE('',*,*,#53062,.T.); +#53062 = EDGE_CURVE('',#52968,#53063,#53065,.T.); +#53063 = VERTEX_POINT('',#53064); +#53064 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53065 = LINE('',#53066,#53067); +#53066 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53067 = VECTOR('',#53068,1.); +#53068 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53069 = ORIENTED_EDGE('',*,*,#53070,.T.); +#53070 = EDGE_CURVE('',#53063,#53071,#53073,.T.); +#53071 = VERTEX_POINT('',#53072); +#53072 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53073 = LINE('',#53074,#53075); +#53074 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#53075 = VECTOR('',#53076,1.); +#53076 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53077 = ORIENTED_EDGE('',*,*,#53078,.T.); +#53078 = EDGE_CURVE('',#53071,#53079,#53081,.T.); +#53079 = VERTEX_POINT('',#53080); +#53080 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53082,#53083),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53082 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53083 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53084 = ORIENTED_EDGE('',*,*,#53085,.F.); +#53085 = EDGE_CURVE('',#52938,#53079,#53086,.T.); +#53086 = LINE('',#53087,#53088); +#53087 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53088 = VECTOR('',#53089,1.); +#53089 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53090 = ORIENTED_EDGE('',*,*,#52937,.F.); +#53091 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53092,#53093) + ,(#53094,#53095 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53092 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#53093 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53094 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53095 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53096 = ADVANCED_FACE('',(#53097),#53120,.T.); +#53097 = FACE_BOUND('',#53098,.T.); +#53098 = EDGE_LOOP('',(#53099,#53109,#53114,#53115)); +#53099 = ORIENTED_EDGE('',*,*,#53100,.T.); +#53100 = EDGE_CURVE('',#53101,#53103,#53105,.T.); +#53101 = VERTEX_POINT('',#53102); +#53102 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53103 = VERTEX_POINT('',#53104); +#53104 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53105 = LINE('',#53106,#53107); +#53106 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53107 = VECTOR('',#53108,1.); +#53108 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53109 = ORIENTED_EDGE('',*,*,#53110,.T.); +#53110 = EDGE_CURVE('',#53103,#52968,#53111,.T.); +#53111 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53112,#53113),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53112 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53113 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53114 = ORIENTED_EDGE('',*,*,#52967,.F.); +#53115 = ORIENTED_EDGE('',*,*,#53116,.F.); +#53116 = EDGE_CURVE('',#53101,#52960,#53117,.T.); +#53117 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53118,#53119),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53118 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53119 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#53120 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53121,#53122) + ,(#53123,#53124 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.44494572606),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53121 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53122 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#53123 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53124 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53125 = ADVANCED_FACE('',(#53126),#53174,.T.); +#53126 = FACE_BOUND('',#53127,.T.); +#53127 = EDGE_LOOP('',(#53128,#53129,#53135,#53136,#53144,#53152,#53160, + #53168)); +#53128 = ORIENTED_EDGE('',*,*,#53070,.F.); +#53129 = ORIENTED_EDGE('',*,*,#53130,.T.); +#53130 = EDGE_CURVE('',#53063,#52996,#53131,.T.); +#53131 = LINE('',#53132,#53133); +#53132 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53133 = VECTOR('',#53134,1.); +#53134 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53135 = ORIENTED_EDGE('',*,*,#52993,.F.); +#53136 = ORIENTED_EDGE('',*,*,#53137,.F.); +#53137 = EDGE_CURVE('',#53138,#52994,#53140,.T.); +#53138 = VERTEX_POINT('',#53139); +#53139 = CARTESIAN_POINT('',(-2.37747286303,-1.,0.22)); +#53140 = LINE('',#53141,#53142); +#53141 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53142 = VECTOR('',#53143,1.); +#53143 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53144 = ORIENTED_EDGE('',*,*,#53145,.T.); +#53145 = EDGE_CURVE('',#53138,#53146,#53148,.T.); +#53146 = VERTEX_POINT('',#53147); +#53147 = CARTESIAN_POINT('',(-1.4,-1.,0.22)); +#53148 = LINE('',#53149,#53150); +#53149 = CARTESIAN_POINT('',(9.781598156056E-02,-1.,0.22)); +#53150 = VECTOR('',#53151,1.); +#53151 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53152 = ORIENTED_EDGE('',*,*,#53153,.T.); +#53153 = EDGE_CURVE('',#53146,#53154,#53156,.T.); +#53154 = VERTEX_POINT('',#53155); +#53155 = CARTESIAN_POINT('',(-1.4,1.,0.22)); +#53156 = LINE('',#53157,#53158); +#53157 = CARTESIAN_POINT('',(-1.4,-0.361236431515,0.22)); +#53158 = VECTOR('',#53159,1.); +#53159 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53160 = ORIENTED_EDGE('',*,*,#53161,.T.); +#53161 = EDGE_CURVE('',#53154,#53162,#53164,.T.); +#53162 = VERTEX_POINT('',#53163); +#53163 = CARTESIAN_POINT('',(-2.37747286303,1.,0.22)); +#53164 = LINE('',#53165,#53166); +#53165 = CARTESIAN_POINT('',(9.781598156056E-02,1.,0.22)); +#53166 = VECTOR('',#53167,1.); +#53167 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53168 = ORIENTED_EDGE('',*,*,#53169,.F.); +#53169 = EDGE_CURVE('',#53071,#53162,#53170,.T.); +#53170 = LINE('',#53171,#53172); +#53171 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53172 = VECTOR('',#53173,1.); +#53173 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53174 = PLANE('',#53175); +#53175 = AXIS2_PLACEMENT_3D('',#53176,#53177,#53178); +#53176 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#53177 = DIRECTION('',(0.,0.,-1.)); +#53178 = DIRECTION('',(-0.809803822742,0.586700748825,0.)); +#53179 = ADVANCED_FACE('',(#53180),#53217,.T.); +#53180 = FACE_BOUND('',#53181,.T.); +#53181 = EDGE_LOOP('',(#53182,#53183,#53184,#53194,#53201,#53209,#53210, + #53211)); +#53182 = ORIENTED_EDGE('',*,*,#53078,.F.); +#53183 = ORIENTED_EDGE('',*,*,#53169,.T.); +#53184 = ORIENTED_EDGE('',*,*,#53185,.T.); +#53185 = EDGE_CURVE('',#53162,#53186,#53188,.T.); +#53186 = VERTEX_POINT('',#53187); +#53187 = CARTESIAN_POINT('',(-2.377627457948,1.,0.2222)); +#53188 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#53189,#53190,#53191,#53192, + #53193),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53189 = CARTESIAN_POINT('',(-2.37747286303,1.,0.22)); +#53190 = CARTESIAN_POINT('',(-2.390434471179,1.,0.40445326836)); +#53191 = CARTESIAN_POINT('',(-2.403396226036,1.,0.588908624477)); +#53192 = CARTESIAN_POINT('',(-2.416358116612,1.,0.773365911976)); +#53193 = CARTESIAN_POINT('',(-2.429320133712,1.,0.957825)); +#53194 = ORIENTED_EDGE('',*,*,#53195,.F.); +#53195 = EDGE_CURVE('',#53196,#53186,#53198,.T.); +#53196 = VERTEX_POINT('',#53197); +#53197 = CARTESIAN_POINT('',(-2.377627457948,-1.,0.2222)); +#53198 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53199,#53200),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53199 = CARTESIAN_POINT('',(-2.377627457948,-1.,0.2222)); +#53200 = CARTESIAN_POINT('',(-2.377627457948,1.,0.2222)); +#53201 = ORIENTED_EDGE('',*,*,#53202,.F.); +#53202 = EDGE_CURVE('',#53138,#53196,#53203,.T.); +#53203 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#53204,#53205,#53206,#53207, + #53208),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53204 = CARTESIAN_POINT('',(-2.37747286303,-1.,0.22)); +#53205 = CARTESIAN_POINT('',(-2.390434471179,-1.,0.40445326836)); +#53206 = CARTESIAN_POINT('',(-2.403396226036,-1.,0.588908624477)); +#53207 = CARTESIAN_POINT('',(-2.416358116612,-1.,0.773365911976)); +#53208 = CARTESIAN_POINT('',(-2.429320133712,-1.,0.957825)); +#53209 = ORIENTED_EDGE('',*,*,#53137,.T.); +#53210 = ORIENTED_EDGE('',*,*,#53019,.T.); +#53211 = ORIENTED_EDGE('',*,*,#53212,.F.); +#53212 = EDGE_CURVE('',#53079,#53012,#53213,.T.); +#53213 = LINE('',#53214,#53215); +#53214 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53215 = VECTOR('',#53216,1.); +#53216 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53217 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53218,#53219) + ,(#53220,#53221 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53218 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53219 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53220 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53221 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53222 = ADVANCED_FACE('',(#53223),#53240,.T.); +#53223 = FACE_BOUND('',#53224,.T.); +#53224 = EDGE_LOOP('',(#53225,#53233,#53234,#53235)); +#53225 = ORIENTED_EDGE('',*,*,#53226,.T.); +#53226 = EDGE_CURVE('',#53227,#53101,#53229,.T.); +#53227 = VERTEX_POINT('',#53228); +#53228 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53229 = LINE('',#53230,#53231); +#53230 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53231 = VECTOR('',#53232,1.); +#53232 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53233 = ORIENTED_EDGE('',*,*,#53116,.T.); +#53234 = ORIENTED_EDGE('',*,*,#53003,.F.); +#53235 = ORIENTED_EDGE('',*,*,#53236,.F.); +#53236 = EDGE_CURVE('',#53227,#52996,#53237,.T.); +#53237 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53238,#53239),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53238 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53239 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53240 = PLANE('',#53241); +#53241 = AXIS2_PLACEMENT_3D('',#53242,#53243,#53244); +#53242 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53243 = DIRECTION('',(-2.214984063823E-16,-0.997540140447, + -7.009756199374E-02)); +#53244 = DIRECTION('',(1.,-2.22044604925E-16,-1.181399173945E-30)); +#53245 = ADVANCED_FACE('',(#53246),#53263,.T.); +#53246 = FACE_BOUND('',#53247,.T.); +#53247 = EDGE_LOOP('',(#53248,#53249,#53250,#53258)); +#53248 = ORIENTED_EDGE('',*,*,#53011,.T.); +#53249 = ORIENTED_EDGE('',*,*,#53048,.T.); +#53250 = ORIENTED_EDGE('',*,*,#53251,.F.); +#53251 = EDGE_CURVE('',#53252,#53041,#53254,.T.); +#53252 = VERTEX_POINT('',#53253); +#53253 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53254 = LINE('',#53255,#53256); +#53255 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53256 = VECTOR('',#53257,1.); +#53257 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53258 = ORIENTED_EDGE('',*,*,#53259,.F.); +#53259 = EDGE_CURVE('',#53012,#53252,#53260,.T.); +#53260 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53261,#53262),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53261 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53262 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53263 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53264,#53265) + ,(#53266,#53267 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53264 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53265 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53266 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53267 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53268 = ADVANCED_FACE('',(#53269),#53286,.T.); +#53269 = FACE_BOUND('',#53270,.T.); +#53270 = EDGE_LOOP('',(#53271,#53272,#53279,#53285)); +#53271 = ORIENTED_EDGE('',*,*,#53085,.T.); +#53272 = ORIENTED_EDGE('',*,*,#53273,.T.); +#53273 = EDGE_CURVE('',#53079,#53274,#53276,.T.); +#53274 = VERTEX_POINT('',#53275); +#53275 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53276 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53277,#53278),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53277 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53278 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53279 = ORIENTED_EDGE('',*,*,#53280,.F.); +#53280 = EDGE_CURVE('',#53034,#53274,#53281,.T.); +#53281 = LINE('',#53282,#53283); +#53282 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53283 = VECTOR('',#53284,1.); +#53284 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53285 = ORIENTED_EDGE('',*,*,#53033,.F.); +#53286 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53287,#53288) + ,(#53289,#53290 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53287 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53288 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53289 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53290 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53291 = ADVANCED_FACE('',(#53292,#53303),#53337,.F.); +#53292 = FACE_BOUND('',#53293,.F.); +#53293 = EDGE_LOOP('',(#53294,#53295,#53296,#53302)); +#53294 = ORIENTED_EDGE('',*,*,#53040,.F.); +#53295 = ORIENTED_EDGE('',*,*,#53251,.F.); +#53296 = ORIENTED_EDGE('',*,*,#53297,.F.); +#53297 = EDGE_CURVE('',#53274,#53252,#53298,.T.); +#53298 = LINE('',#53299,#53300); +#53299 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53300 = VECTOR('',#53301,1.); +#53301 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53302 = ORIENTED_EDGE('',*,*,#53280,.F.); +#53303 = FACE_BOUND('',#53304,.F.); +#53304 = EDGE_LOOP('',(#53305,#53315,#53323,#53331)); +#53305 = ORIENTED_EDGE('',*,*,#53306,.T.); +#53306 = EDGE_CURVE('',#53307,#53309,#53311,.T.); +#53307 = VERTEX_POINT('',#53308); +#53308 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53309 = VERTEX_POINT('',#53310); +#53310 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53311 = LINE('',#53312,#53313); +#53312 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53313 = VECTOR('',#53314,1.); +#53314 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53315 = ORIENTED_EDGE('',*,*,#53316,.T.); +#53316 = EDGE_CURVE('',#53309,#53317,#53319,.T.); +#53317 = VERTEX_POINT('',#53318); +#53318 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53319 = LINE('',#53320,#53321); +#53320 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53321 = VECTOR('',#53322,1.); +#53322 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53323 = ORIENTED_EDGE('',*,*,#53324,.T.); +#53324 = EDGE_CURVE('',#53317,#53325,#53327,.T.); +#53325 = VERTEX_POINT('',#53326); +#53326 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53327 = LINE('',#53328,#53329); +#53328 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53329 = VECTOR('',#53330,1.); +#53330 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53331 = ORIENTED_EDGE('',*,*,#53332,.T.); +#53332 = EDGE_CURVE('',#53325,#53307,#53333,.T.); +#53333 = LINE('',#53334,#53335); +#53334 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53335 = VECTOR('',#53336,1.); +#53336 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53337 = PLANE('',#53338); +#53338 = AXIS2_PLACEMENT_3D('',#53339,#53340,#53341); +#53339 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53340 = DIRECTION('',(0.,0.,-1.)); +#53341 = DIRECTION('',(-0.811184528135,0.584790271221,0.)); +#53342 = ADVANCED_FACE('',(#53343),#53360,.T.); +#53343 = FACE_BOUND('',#53344,.T.); +#53344 = EDGE_LOOP('',(#53345,#53353,#53358,#53359)); +#53345 = ORIENTED_EDGE('',*,*,#53346,.T.); +#53346 = EDGE_CURVE('',#53103,#53347,#53349,.T.); +#53347 = VERTEX_POINT('',#53348); +#53348 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53349 = LINE('',#53350,#53351); +#53350 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53351 = VECTOR('',#53352,1.); +#53352 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53353 = ORIENTED_EDGE('',*,*,#53354,.T.); +#53354 = EDGE_CURVE('',#53347,#53063,#53355,.T.); +#53355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53356,#53357),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53356 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53357 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53358 = ORIENTED_EDGE('',*,*,#53062,.F.); +#53359 = ORIENTED_EDGE('',*,*,#53110,.F.); +#53360 = PLANE('',#53361); +#53361 = AXIS2_PLACEMENT_3D('',#53362,#53363,#53364); +#53362 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53363 = DIRECTION('',(2.214984063823E-16,0.997540140447, + -7.009756199374E-02)); +#53364 = DIRECTION('',(-1.,2.22044604925E-16,-1.181399173945E-30)); +#53365 = ADVANCED_FACE('',(#53366),#53377,.T.); +#53366 = FACE_BOUND('',#53367,.F.); +#53367 = EDGE_LOOP('',(#53368,#53369,#53370,#53376)); +#53368 = ORIENTED_EDGE('',*,*,#53100,.T.); +#53369 = ORIENTED_EDGE('',*,*,#53346,.T.); +#53370 = ORIENTED_EDGE('',*,*,#53371,.T.); +#53371 = EDGE_CURVE('',#53347,#53227,#53372,.T.); +#53372 = LINE('',#53373,#53374); +#53373 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53374 = VECTOR('',#53375,1.); +#53375 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53376 = ORIENTED_EDGE('',*,*,#53226,.T.); +#53377 = PLANE('',#53378); +#53378 = AXIS2_PLACEMENT_3D('',#53379,#53380,#53381); +#53379 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53380 = DIRECTION('',(0.,0.,-1.)); +#53381 = DIRECTION('',(-0.605871695069,0.795562372863,0.)); +#53382 = ADVANCED_FACE('',(#53383),#53451,.T.); +#53383 = FACE_BOUND('',#53384,.T.); +#53384 = EDGE_LOOP('',(#53385,#53396,#53404,#53413,#53421,#53429,#53435, + #53436,#53437,#53445)); +#53385 = ORIENTED_EDGE('',*,*,#53386,.F.); +#53386 = EDGE_CURVE('',#53387,#53389,#53391,.T.); +#53387 = VERTEX_POINT('',#53388); +#53388 = CARTESIAN_POINT('',(-2.65,1.,0.146666666667)); +#53389 = VERTEX_POINT('',#53390); +#53390 = CARTESIAN_POINT('',(-2.503333333333,1.,-2.775557561563E-17)); +#53391 = CIRCLE('',#53392,0.146666666667); +#53392 = AXIS2_PLACEMENT_3D('',#53393,#53394,#53395); +#53393 = CARTESIAN_POINT('',(-2.503333333333,1.,0.146666666667)); +#53394 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53395 = DIRECTION('',(0.,0.,1.)); +#53396 = ORIENTED_EDGE('',*,*,#53397,.T.); +#53397 = EDGE_CURVE('',#53387,#53398,#53400,.T.); +#53398 = VERTEX_POINT('',#53399); +#53399 = CARTESIAN_POINT('',(-2.65,1.,0.811158333333)); +#53400 = LINE('',#53401,#53402); +#53401 = CARTESIAN_POINT('',(-2.65,1.,0.)); +#53402 = VECTOR('',#53403,1.); +#53403 = DIRECTION('',(0.,0.,1.)); +#53404 = ORIENTED_EDGE('',*,*,#53405,.T.); +#53405 = EDGE_CURVE('',#53398,#53406,#53408,.T.); +#53406 = VERTEX_POINT('',#53407); +#53407 = CARTESIAN_POINT('',(-2.503333333333,1.,0.957825)); +#53408 = CIRCLE('',#53409,0.146666666667); +#53409 = AXIS2_PLACEMENT_3D('',#53410,#53411,#53412); +#53410 = CARTESIAN_POINT('',(-2.503333333333,1.,0.811158333333)); +#53411 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#53412 = DIRECTION('',(0.,0.,1.)); +#53413 = ORIENTED_EDGE('',*,*,#53414,.T.); +#53414 = EDGE_CURVE('',#53406,#53415,#53417,.T.); +#53415 = VERTEX_POINT('',#53416); +#53416 = CARTESIAN_POINT('',(-2.43,1.,0.957825)); +#53417 = LINE('',#53418,#53419); +#53418 = CARTESIAN_POINT('',(-2.65,1.,0.957825)); +#53419 = VECTOR('',#53420,1.); +#53420 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53421 = ORIENTED_EDGE('',*,*,#53422,.F.); +#53422 = EDGE_CURVE('',#53423,#53415,#53425,.T.); +#53423 = VERTEX_POINT('',#53424); +#53424 = CARTESIAN_POINT('',(-2.43,1.,0.2222)); +#53425 = LINE('',#53426,#53427); +#53426 = CARTESIAN_POINT('',(-2.43,1.,0.)); +#53427 = VECTOR('',#53428,1.); +#53428 = DIRECTION('',(0.,0.,1.)); +#53429 = ORIENTED_EDGE('',*,*,#53430,.T.); +#53430 = EDGE_CURVE('',#53423,#53186,#53431,.T.); +#53431 = LINE('',#53432,#53433); +#53432 = CARTESIAN_POINT('',(-2.43,1.,0.2222)); +#53433 = VECTOR('',#53434,1.); +#53434 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53435 = ORIENTED_EDGE('',*,*,#53185,.F.); +#53436 = ORIENTED_EDGE('',*,*,#53161,.F.); +#53437 = ORIENTED_EDGE('',*,*,#53438,.F.); +#53438 = EDGE_CURVE('',#53439,#53154,#53441,.T.); +#53439 = VERTEX_POINT('',#53440); +#53440 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53441 = LINE('',#53442,#53443); +#53442 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53443 = VECTOR('',#53444,1.); +#53444 = DIRECTION('',(0.,0.,1.)); +#53445 = ORIENTED_EDGE('',*,*,#53446,.F.); +#53446 = EDGE_CURVE('',#53389,#53439,#53447,.T.); +#53447 = LINE('',#53448,#53449); +#53448 = CARTESIAN_POINT('',(-2.43,1.,0.)); +#53449 = VECTOR('',#53450,1.); +#53450 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53451 = PLANE('',#53452); +#53452 = AXIS2_PLACEMENT_3D('',#53453,#53454,#53455); +#53453 = CARTESIAN_POINT('',(-2.181840899909,1.,0.302067385793)); +#53454 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53455 = DIRECTION('',(0.,-0.,1.)); +#53456 = ADVANCED_FACE('',(#53457),#53475,.T.); +#53457 = FACE_BOUND('',#53458,.T.); +#53458 = EDGE_LOOP('',(#53459,#53467,#53468,#53469)); +#53459 = ORIENTED_EDGE('',*,*,#53460,.F.); +#53460 = EDGE_CURVE('',#53439,#53461,#53463,.T.); +#53461 = VERTEX_POINT('',#53462); +#53462 = CARTESIAN_POINT('',(-1.4,-1.,0.)); +#53463 = LINE('',#53464,#53465); +#53464 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53465 = VECTOR('',#53466,1.); +#53466 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53467 = ORIENTED_EDGE('',*,*,#53438,.T.); +#53468 = ORIENTED_EDGE('',*,*,#53153,.F.); +#53469 = ORIENTED_EDGE('',*,*,#53470,.F.); +#53470 = EDGE_CURVE('',#53461,#53146,#53471,.T.); +#53471 = LINE('',#53472,#53473); +#53472 = CARTESIAN_POINT('',(-1.4,-1.,0.)); +#53473 = VECTOR('',#53474,1.); +#53474 = DIRECTION('',(0.,0.,1.)); +#53475 = PLANE('',#53476); +#53476 = AXIS2_PLACEMENT_3D('',#53477,#53478,#53479); +#53477 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53478 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53479 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53480 = ADVANCED_FACE('',(#53481),#53542,.T.); +#53481 = FACE_BOUND('',#53482,.T.); +#53482 = EDGE_LOOP('',(#53483,#53493,#53502,#53508,#53509,#53510,#53511, + #53519,#53527,#53535)); +#53483 = ORIENTED_EDGE('',*,*,#53484,.F.); +#53484 = EDGE_CURVE('',#53485,#53487,#53489,.T.); +#53485 = VERTEX_POINT('',#53486); +#53486 = CARTESIAN_POINT('',(-2.65,-1.,0.146666666667)); +#53487 = VERTEX_POINT('',#53488); +#53488 = CARTESIAN_POINT('',(-2.65,-1.,0.811158333333)); +#53489 = LINE('',#53490,#53491); +#53490 = CARTESIAN_POINT('',(-2.65,-1.,0.)); +#53491 = VECTOR('',#53492,1.); +#53492 = DIRECTION('',(0.,0.,1.)); +#53493 = ORIENTED_EDGE('',*,*,#53494,.T.); +#53494 = EDGE_CURVE('',#53485,#53495,#53497,.T.); +#53495 = VERTEX_POINT('',#53496); +#53496 = CARTESIAN_POINT('',(-2.503333333333,-1.,-2.775557561563E-17)); +#53497 = CIRCLE('',#53498,0.146666666667); +#53498 = AXIS2_PLACEMENT_3D('',#53499,#53500,#53501); +#53499 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.146666666667)); +#53500 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53501 = DIRECTION('',(0.,0.,1.)); +#53502 = ORIENTED_EDGE('',*,*,#53503,.F.); +#53503 = EDGE_CURVE('',#53461,#53495,#53504,.T.); +#53504 = LINE('',#53505,#53506); +#53505 = CARTESIAN_POINT('',(-2.43,-1.,0.)); +#53506 = VECTOR('',#53507,1.); +#53507 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53508 = ORIENTED_EDGE('',*,*,#53470,.T.); +#53509 = ORIENTED_EDGE('',*,*,#53145,.F.); +#53510 = ORIENTED_EDGE('',*,*,#53202,.T.); +#53511 = ORIENTED_EDGE('',*,*,#53512,.T.); +#53512 = EDGE_CURVE('',#53196,#53513,#53515,.T.); +#53513 = VERTEX_POINT('',#53514); +#53514 = CARTESIAN_POINT('',(-2.43,-1.,0.2222)); +#53515 = LINE('',#53516,#53517); +#53516 = CARTESIAN_POINT('',(-1.4,-1.,0.2222)); +#53517 = VECTOR('',#53518,1.); +#53518 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53519 = ORIENTED_EDGE('',*,*,#53520,.T.); +#53520 = EDGE_CURVE('',#53513,#53521,#53523,.T.); +#53521 = VERTEX_POINT('',#53522); +#53522 = CARTESIAN_POINT('',(-2.43,-1.,0.957825)); +#53523 = LINE('',#53524,#53525); +#53524 = CARTESIAN_POINT('',(-2.43,-1.,0.)); +#53525 = VECTOR('',#53526,1.); +#53526 = DIRECTION('',(0.,0.,1.)); +#53527 = ORIENTED_EDGE('',*,*,#53528,.T.); +#53528 = EDGE_CURVE('',#53521,#53529,#53531,.T.); +#53529 = VERTEX_POINT('',#53530); +#53530 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.957825)); +#53531 = LINE('',#53532,#53533); +#53532 = CARTESIAN_POINT('',(-2.43,-1.,0.957825)); +#53533 = VECTOR('',#53534,1.); +#53534 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53535 = ORIENTED_EDGE('',*,*,#53536,.F.); +#53536 = EDGE_CURVE('',#53487,#53529,#53537,.T.); +#53537 = CIRCLE('',#53538,0.146666666667); +#53538 = AXIS2_PLACEMENT_3D('',#53539,#53540,#53541); +#53539 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.811158333333)); +#53540 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#53541 = DIRECTION('',(0.,0.,1.)); +#53542 = PLANE('',#53543); +#53543 = AXIS2_PLACEMENT_3D('',#53544,#53545,#53546); +#53544 = CARTESIAN_POINT('',(-2.181840899909,-1.,0.302067385793)); +#53545 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#53546 = DIRECTION('',(0.,0.,-1.)); +#53547 = ADVANCED_FACE('',(#53548),#53554,.T.); +#53548 = FACE_BOUND('',#53549,.T.); +#53549 = EDGE_LOOP('',(#53550,#53551,#53552,#53553)); +#53550 = ORIENTED_EDGE('',*,*,#53371,.T.); +#53551 = ORIENTED_EDGE('',*,*,#53236,.T.); +#53552 = ORIENTED_EDGE('',*,*,#53130,.F.); +#53553 = ORIENTED_EDGE('',*,*,#53354,.F.); +#53554 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53555,#53556) + ,(#53557,#53558 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.44494572606),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53555 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53556 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53557 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53558 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53559 = ADVANCED_FACE('',(#53560),#53566,.T.); +#53560 = FACE_BOUND('',#53561,.T.); +#53561 = EDGE_LOOP('',(#53562,#53563,#53564,#53565)); +#53562 = ORIENTED_EDGE('',*,*,#53212,.T.); +#53563 = ORIENTED_EDGE('',*,*,#53259,.T.); +#53564 = ORIENTED_EDGE('',*,*,#53297,.F.); +#53565 = ORIENTED_EDGE('',*,*,#53273,.F.); +#53566 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53567,#53568) + ,(#53569,#53570 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53567 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53568 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53569 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53570 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53571 = ADVANCED_FACE('',(#53572),#53583,.F.); +#53572 = FACE_BOUND('',#53573,.F.); +#53573 = EDGE_LOOP('',(#53574,#53575,#53576,#53582)); +#53574 = ORIENTED_EDGE('',*,*,#53195,.F.); +#53575 = ORIENTED_EDGE('',*,*,#53512,.T.); +#53576 = ORIENTED_EDGE('',*,*,#53577,.T.); +#53577 = EDGE_CURVE('',#53513,#53423,#53578,.T.); +#53578 = LINE('',#53579,#53580); +#53579 = CARTESIAN_POINT('',(-2.43,-1.,0.2222)); +#53580 = VECTOR('',#53581,1.); +#53581 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53582 = ORIENTED_EDGE('',*,*,#53430,.T.); +#53583 = PLANE('',#53584); +#53584 = AXIS2_PLACEMENT_3D('',#53585,#53586,#53587); +#53585 = CARTESIAN_POINT('',(-1.915,4.440892098501E-16,0.2222)); +#53586 = DIRECTION('',(0.,-0.,-1.)); +#53587 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53588 = ADVANCED_FACE('',(#53589),#53612,.F.); +#53589 = FACE_BOUND('',#53590,.F.); +#53590 = EDGE_LOOP('',(#53591,#53601,#53606,#53607)); +#53591 = ORIENTED_EDGE('',*,*,#53592,.T.); +#53592 = EDGE_CURVE('',#53593,#53595,#53597,.T.); +#53593 = VERTEX_POINT('',#53594); +#53594 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.1478)); +#53595 = VERTEX_POINT('',#53596); +#53596 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.1478)); +#53597 = LINE('',#53598,#53599); +#53598 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.1478)); +#53599 = VECTOR('',#53600,1.); +#53600 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53601 = ORIENTED_EDGE('',*,*,#53602,.T.); +#53602 = EDGE_CURVE('',#53595,#53309,#53603,.T.); +#53603 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53604,#53605),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53604 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.1478)); +#53605 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53606 = ORIENTED_EDGE('',*,*,#53306,.F.); +#53607 = ORIENTED_EDGE('',*,*,#53608,.F.); +#53608 = EDGE_CURVE('',#53593,#53307,#53609,.T.); +#53609 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53610,#53611),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53610 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.1478)); +#53611 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53612 = PLANE('',#53613); +#53613 = AXIS2_PLACEMENT_3D('',#53614,#53615,#53616); +#53614 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53615 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53616 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53617 = ADVANCED_FACE('',(#53618),#53635,.F.); +#53618 = FACE_BOUND('',#53619,.F.); +#53619 = EDGE_LOOP('',(#53620,#53628,#53629,#53630)); +#53620 = ORIENTED_EDGE('',*,*,#53621,.T.); +#53621 = EDGE_CURVE('',#53622,#53593,#53624,.T.); +#53622 = VERTEX_POINT('',#53623); +#53623 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53624 = LINE('',#53625,#53626); +#53625 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53626 = VECTOR('',#53627,1.); +#53627 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53628 = ORIENTED_EDGE('',*,*,#53608,.T.); +#53629 = ORIENTED_EDGE('',*,*,#53332,.F.); +#53630 = ORIENTED_EDGE('',*,*,#53631,.F.); +#53631 = EDGE_CURVE('',#53622,#53325,#53632,.T.); +#53632 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53633,#53634),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53633 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53634 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53635 = PLANE('',#53636); +#53636 = AXIS2_PLACEMENT_3D('',#53637,#53638,#53639); +#53637 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53638 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53639 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53640 = ADVANCED_FACE('',(#53641),#53658,.F.); +#53641 = FACE_BOUND('',#53642,.F.); +#53642 = EDGE_LOOP('',(#53643,#53651,#53652,#53653)); +#53643 = ORIENTED_EDGE('',*,*,#53644,.T.); +#53644 = EDGE_CURVE('',#53645,#53622,#53647,.T.); +#53645 = VERTEX_POINT('',#53646); +#53646 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.1478)); +#53647 = LINE('',#53648,#53649); +#53648 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.1478)); +#53649 = VECTOR('',#53650,1.); +#53650 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53651 = ORIENTED_EDGE('',*,*,#53631,.T.); +#53652 = ORIENTED_EDGE('',*,*,#53324,.F.); +#53653 = ORIENTED_EDGE('',*,*,#53654,.F.); +#53654 = EDGE_CURVE('',#53645,#53317,#53655,.T.); +#53655 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53656,#53657),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53656 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.1478)); +#53657 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53658 = PLANE('',#53659); +#53659 = AXIS2_PLACEMENT_3D('',#53660,#53661,#53662); +#53660 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53661 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53662 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53663 = ADVANCED_FACE('',(#53664),#53675,.F.); +#53664 = FACE_BOUND('',#53665,.F.); +#53665 = EDGE_LOOP('',(#53666,#53672,#53673,#53674)); +#53666 = ORIENTED_EDGE('',*,*,#53667,.T.); +#53667 = EDGE_CURVE('',#53595,#53645,#53668,.T.); +#53668 = LINE('',#53669,#53670); +#53669 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.1478)); +#53670 = VECTOR('',#53671,1.); +#53671 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53672 = ORIENTED_EDGE('',*,*,#53654,.T.); +#53673 = ORIENTED_EDGE('',*,*,#53316,.F.); +#53674 = ORIENTED_EDGE('',*,*,#53602,.F.); +#53675 = PLANE('',#53676); +#53676 = AXIS2_PLACEMENT_3D('',#53677,#53678,#53679); +#53677 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53678 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53679 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53680 = ADVANCED_FACE('',(#53681),#53697,.T.); +#53681 = FACE_BOUND('',#53682,.T.); +#53682 = EDGE_LOOP('',(#53683,#53689,#53690,#53696)); +#53683 = ORIENTED_EDGE('',*,*,#53684,.T.); +#53684 = EDGE_CURVE('',#53485,#53387,#53685,.T.); +#53685 = LINE('',#53686,#53687); +#53686 = CARTESIAN_POINT('',(-2.65,-1.,0.146666666667)); +#53687 = VECTOR('',#53688,1.); +#53688 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53689 = ORIENTED_EDGE('',*,*,#53386,.T.); +#53690 = ORIENTED_EDGE('',*,*,#53691,.F.); +#53691 = EDGE_CURVE('',#53495,#53389,#53692,.T.); +#53692 = LINE('',#53693,#53694); +#53693 = CARTESIAN_POINT('',(-2.503333333333,-1.,-2.775557561563E-17)); +#53694 = VECTOR('',#53695,1.); +#53695 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53696 = ORIENTED_EDGE('',*,*,#53494,.F.); +#53697 = CYLINDRICAL_SURFACE('',#53698,0.146666666667); +#53698 = AXIS2_PLACEMENT_3D('',#53699,#53700,#53701); +#53699 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.146666666667)); +#53700 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53701 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53702 = ADVANCED_FACE('',(#53703),#53709,.T.); +#53703 = FACE_BOUND('',#53704,.T.); +#53704 = EDGE_LOOP('',(#53705,#53706,#53707,#53708)); +#53705 = ORIENTED_EDGE('',*,*,#53503,.T.); +#53706 = ORIENTED_EDGE('',*,*,#53691,.T.); +#53707 = ORIENTED_EDGE('',*,*,#53446,.T.); +#53708 = ORIENTED_EDGE('',*,*,#53460,.T.); +#53709 = PLANE('',#53710); +#53710 = AXIS2_PLACEMENT_3D('',#53711,#53712,#53713); +#53711 = CARTESIAN_POINT('',(-1.951666666667,4.691322319676E-16, + -8.943794505573E-18)); +#53712 = DIRECTION('',(1.696061518107E-17,-4.165945518725E-33,-1.)); +#53713 = DIRECTION('',(1.,-2.22044604925E-16,1.696061518107E-17)); +#53714 = ADVANCED_FACE('',(#53715),#53726,.T.); +#53715 = FACE_BOUND('',#53716,.T.); +#53716 = EDGE_LOOP('',(#53717,#53718,#53719,#53725)); +#53717 = ORIENTED_EDGE('',*,*,#53577,.T.); +#53718 = ORIENTED_EDGE('',*,*,#53422,.T.); +#53719 = ORIENTED_EDGE('',*,*,#53720,.T.); +#53720 = EDGE_CURVE('',#53415,#53521,#53721,.T.); +#53721 = LINE('',#53722,#53723); +#53722 = CARTESIAN_POINT('',(-2.43,1.,0.957825)); +#53723 = VECTOR('',#53724,1.); +#53724 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53725 = ORIENTED_EDGE('',*,*,#53520,.F.); +#53726 = PLANE('',#53727); +#53727 = AXIS2_PLACEMENT_3D('',#53728,#53729,#53730); +#53728 = CARTESIAN_POINT('',(-2.43,1.,0.)); +#53729 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53730 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53731 = ADVANCED_FACE('',(#53732),#53743,.F.); +#53732 = FACE_BOUND('',#53733,.F.); +#53733 = EDGE_LOOP('',(#53734,#53735,#53741,#53742)); +#53734 = ORIENTED_EDGE('',*,*,#53528,.T.); +#53735 = ORIENTED_EDGE('',*,*,#53736,.T.); +#53736 = EDGE_CURVE('',#53529,#53406,#53737,.T.); +#53737 = LINE('',#53738,#53739); +#53738 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.957825)); +#53739 = VECTOR('',#53740,1.); +#53740 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53741 = ORIENTED_EDGE('',*,*,#53414,.T.); +#53742 = ORIENTED_EDGE('',*,*,#53720,.T.); +#53743 = PLANE('',#53744); +#53744 = AXIS2_PLACEMENT_3D('',#53745,#53746,#53747); +#53745 = CARTESIAN_POINT('',(-2.54,6.661338147751E-16,0.957825)); +#53746 = DIRECTION('',(0.,-0.,-1.)); +#53747 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53748 = ADVANCED_FACE('',(#53749),#53760,.T.); +#53749 = FACE_BOUND('',#53750,.T.); +#53750 = EDGE_LOOP('',(#53751,#53752,#53753,#53754)); +#53751 = ORIENTED_EDGE('',*,*,#53536,.T.); +#53752 = ORIENTED_EDGE('',*,*,#53736,.T.); +#53753 = ORIENTED_EDGE('',*,*,#53405,.F.); +#53754 = ORIENTED_EDGE('',*,*,#53755,.F.); +#53755 = EDGE_CURVE('',#53487,#53398,#53756,.T.); +#53756 = LINE('',#53757,#53758); +#53757 = CARTESIAN_POINT('',(-2.65,-1.,0.811158333333)); +#53758 = VECTOR('',#53759,1.); +#53759 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53760 = CYLINDRICAL_SURFACE('',#53761,0.146666666667); +#53761 = AXIS2_PLACEMENT_3D('',#53762,#53763,#53764); +#53762 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.811158333333)); +#53763 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53764 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53765 = ADVANCED_FACE('',(#53766),#53772,.T.); +#53766 = FACE_BOUND('',#53767,.T.); +#53767 = EDGE_LOOP('',(#53768,#53769,#53770,#53771)); +#53768 = ORIENTED_EDGE('',*,*,#53484,.T.); +#53769 = ORIENTED_EDGE('',*,*,#53755,.T.); +#53770 = ORIENTED_EDGE('',*,*,#53397,.F.); +#53771 = ORIENTED_EDGE('',*,*,#53684,.F.); +#53772 = PLANE('',#53773); +#53773 = AXIS2_PLACEMENT_3D('',#53774,#53775,#53776); +#53774 = CARTESIAN_POINT('',(-2.65,-1.,0.)); +#53775 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53776 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53777 = ADVANCED_FACE('',(#53778),#53784,.F.); +#53778 = FACE_BOUND('',#53779,.T.); +#53779 = EDGE_LOOP('',(#53780,#53781,#53782,#53783)); +#53780 = ORIENTED_EDGE('',*,*,#53621,.T.); +#53781 = ORIENTED_EDGE('',*,*,#53592,.T.); +#53782 = ORIENTED_EDGE('',*,*,#53667,.T.); +#53783 = ORIENTED_EDGE('',*,*,#53644,.T.); +#53784 = PLANE('',#53785); +#53785 = AXIS2_PLACEMENT_3D('',#53786,#53787,#53788); +#53786 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53787 = DIRECTION('',(0.,0.,-1.)); +#53788 = DIRECTION('',(-0.183313304678,0.983054541889,0.)); +#53789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#53793)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#53790,#53791,#53792)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#53790 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#53791 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#53792 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#53793 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#53790, + 'distance_accuracy_value','confusion accuracy'); +#53794 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53795,#53797); +#53795 = ( REPRESENTATION_RELATIONSHIP('','',#52580,#52557) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53796) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53796 = ITEM_DEFINED_TRANSFORMATION('','',#11,#52558); +#53797 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53798); +#53798 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','=>[0:1:1:31]','',#52552, + #52575,$); +#53799 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#52577)); +#53800 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53801,#53803); +#53801 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53802) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53802 = ITEM_DEFINED_TRANSFORMATION('','',#11,#143); +#53803 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53804); +#53804 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('48','Rcomp','',#5,#523,$); +#53805 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53806,#53808); +#53806 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53807) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53807 = ITEM_DEFINED_TRANSFORMATION('','',#11,#147); +#53808 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53809); +#53809 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('49','Q5','',#5,#36156,$); +#53810 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53811,#53813); +#53811 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53812) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53812 = ITEM_DEFINED_TRANSFORMATION('','',#11,#151); +#53813 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53814); +#53814 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('50','C7','',#5,#14742,$); +#53815 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53816,#53818); +#53816 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53817) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53817 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155); +#53818 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53819); +#53819 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('51','P2','',#5,#11985,$); +#53820 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53821,#53823); +#53821 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53822) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53822 = ITEM_DEFINED_TRANSFORMATION('','',#11,#159); +#53823 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53824); +#53824 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('52','R20','',#5,#523,$); +#53825 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53826,#53828); +#53826 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53827) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53827 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163); +#53828 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53829); +#53829 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('53','Cbst2','',#5,#14742,$); +#53830 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53831,#53833); +#53831 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53832) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53832 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167); +#53833 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53834); +#53834 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('54','Rts','',#5,#523,$); +#53835 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53836,#53838); +#53836 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53837) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53837 = ITEM_DEFINED_TRANSFORMATION('','',#11,#171); +#53838 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53839); +#53839 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('55','Q2','',#5,#36156,$); +#53840 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53841,#53843); +#53841 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53842) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53842 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175); +#53843 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53844); +#53844 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('56','Cbst','',#5,#14742,$); +#53845 = SHAPE_DEFINITION_REPRESENTATION(#53846,#53852); +#53846 = PRODUCT_DEFINITION_SHAPE('','',#53847); +#53847 = PRODUCT_DEFINITION('design','',#53848,#53851); +#53848 = PRODUCT_DEFINITION_FORMATION('','',#53849); +#53849 = PRODUCT('PinHeader_1x03_P2.54mm_Vertical', + 'PinHeader_1x03_P2.54mm_Vertical','',(#53850)); +#53850 = PRODUCT_CONTEXT('',#2,'mechanical'); +#53851 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#53852 = SHAPE_REPRESENTATION('',(#11,#53853),#53857); +#53853 = AXIS2_PLACEMENT_3D('',#53854,#53855,#53856); +#53854 = CARTESIAN_POINT('',(0.,0.,0.)); +#53855 = DIRECTION('',(0.,0.,1.)); +#53856 = DIRECTION('',(1.,0.,-0.)); +#53857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#53861)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#53858,#53859,#53860)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#53858 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#53859 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#53860 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#53861 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#53858, + 'distance_accuracy_value','confusion accuracy'); +#53862 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53863,#53865); +#53863 = ( REPRESENTATION_RELATIONSHIP('','',#53852,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53864) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53864 = ITEM_DEFINED_TRANSFORMATION('','',#11,#179); +#53865 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53866); +#53866 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('58','H3','',#5,#53847,$); +#53867 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#53849)); +#53868 = SHAPE_DEFINITION_REPRESENTATION(#53869,#53875); +#53869 = PRODUCT_DEFINITION_SHAPE('','',#53870); +#53870 = PRODUCT_DEFINITION('design','',#53871,#53874); +#53871 = PRODUCT_DEFINITION_FORMATION('','',#53872); +#53872 = PRODUCT('PinHeader_1x03_P254mm_Vertical', + 'PinHeader_1x03_P254mm_Vertical','',(#53873)); +#53873 = PRODUCT_CONTEXT('',#2,'mechanical'); +#53874 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#53875 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#53876),#55982); +#53876 = MANIFOLD_SOLID_BREP('',#53877); +#53877 = CLOSED_SHELL('',(#53878,#53918,#53949,#53980,#54227,#54474, + #54491,#54508,#54525,#54542,#54559,#54576,#54593,#54610,#54627, + #54644,#54661,#54678,#54695,#54712,#54729,#54746,#54758,#54789, + #54813,#54837,#54854,#54885,#54909,#54933,#54950,#54981,#55005, + #55029,#55046,#55077,#55101,#55125,#55142,#55173,#55197,#55221, + #55238,#55269,#55293,#55317,#55334,#55365,#55389,#55413,#55430, + #55461,#55485,#55509,#55526,#55557,#55581,#55605,#55622,#55653, + #55677,#55701,#55718,#55749,#55773,#55797,#55814,#55845,#55869, + #55893,#55910,#55922,#55934,#55946,#55958,#55970)); +#53878 = ADVANCED_FACE('',(#53879),#53913,.F.); +#53879 = FACE_BOUND('',#53880,.F.); +#53880 = EDGE_LOOP('',(#53881,#53891,#53899,#53907)); +#53881 = ORIENTED_EDGE('',*,*,#53882,.T.); +#53882 = EDGE_CURVE('',#53883,#53885,#53887,.T.); +#53883 = VERTEX_POINT('',#53884); +#53884 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53885 = VERTEX_POINT('',#53886); +#53886 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#53887 = LINE('',#53888,#53889); +#53888 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53889 = VECTOR('',#53890,1.); +#53890 = DIRECTION('',(0.,0.,1.)); +#53891 = ORIENTED_EDGE('',*,*,#53892,.T.); +#53892 = EDGE_CURVE('',#53885,#53893,#53895,.T.); +#53893 = VERTEX_POINT('',#53894); +#53894 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#53895 = LINE('',#53896,#53897); +#53896 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#53897 = VECTOR('',#53898,1.); +#53898 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#53899 = ORIENTED_EDGE('',*,*,#53900,.F.); +#53900 = EDGE_CURVE('',#53901,#53893,#53903,.T.); +#53901 = VERTEX_POINT('',#53902); +#53902 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53903 = LINE('',#53904,#53905); +#53904 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53905 = VECTOR('',#53906,1.); +#53906 = DIRECTION('',(0.,0.,1.)); +#53907 = ORIENTED_EDGE('',*,*,#53908,.F.); +#53908 = EDGE_CURVE('',#53883,#53901,#53909,.T.); +#53909 = LINE('',#53910,#53911); +#53910 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53911 = VECTOR('',#53912,1.); +#53912 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#53913 = PLANE('',#53914); +#53914 = AXIS2_PLACEMENT_3D('',#53915,#53916,#53917); +#53915 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53916 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#53917 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#53918 = ADVANCED_FACE('',(#53919),#53944,.F.); +#53919 = FACE_BOUND('',#53920,.F.); +#53920 = EDGE_LOOP('',(#53921,#53931,#53937,#53938)); +#53921 = ORIENTED_EDGE('',*,*,#53922,.T.); +#53922 = EDGE_CURVE('',#53923,#53925,#53927,.T.); +#53923 = VERTEX_POINT('',#53924); +#53924 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53925 = VERTEX_POINT('',#53926); +#53926 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#53927 = LINE('',#53928,#53929); +#53928 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53929 = VECTOR('',#53930,1.); +#53930 = DIRECTION('',(0.,0.,1.)); +#53931 = ORIENTED_EDGE('',*,*,#53932,.T.); +#53932 = EDGE_CURVE('',#53925,#53885,#53933,.T.); +#53933 = LINE('',#53934,#53935); +#53934 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#53935 = VECTOR('',#53936,1.); +#53936 = DIRECTION('',(-1.,0.,0.)); +#53937 = ORIENTED_EDGE('',*,*,#53882,.F.); +#53938 = ORIENTED_EDGE('',*,*,#53939,.F.); +#53939 = EDGE_CURVE('',#53923,#53883,#53940,.T.); +#53940 = LINE('',#53941,#53942); +#53941 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53942 = VECTOR('',#53943,1.); +#53943 = DIRECTION('',(-1.,0.,0.)); +#53944 = PLANE('',#53945); +#53945 = AXIS2_PLACEMENT_3D('',#53946,#53947,#53948); +#53946 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53947 = DIRECTION('',(0.,-1.,0.)); +#53948 = DIRECTION('',(-1.,0.,0.)); +#53949 = ADVANCED_FACE('',(#53950),#53975,.F.); +#53950 = FACE_BOUND('',#53951,.F.); +#53951 = EDGE_LOOP('',(#53952,#53953,#53961,#53969)); +#53952 = ORIENTED_EDGE('',*,*,#53900,.T.); +#53953 = ORIENTED_EDGE('',*,*,#53954,.T.); +#53954 = EDGE_CURVE('',#53893,#53955,#53957,.T.); +#53955 = VERTEX_POINT('',#53956); +#53956 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#53957 = LINE('',#53958,#53959); +#53958 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#53959 = VECTOR('',#53960,1.); +#53960 = DIRECTION('',(0.,-1.,0.)); +#53961 = ORIENTED_EDGE('',*,*,#53962,.F.); +#53962 = EDGE_CURVE('',#53963,#53955,#53965,.T.); +#53963 = VERTEX_POINT('',#53964); +#53964 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#53965 = LINE('',#53966,#53967); +#53966 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#53967 = VECTOR('',#53968,1.); +#53968 = DIRECTION('',(0.,0.,1.)); +#53969 = ORIENTED_EDGE('',*,*,#53970,.F.); +#53970 = EDGE_CURVE('',#53901,#53963,#53971,.T.); +#53971 = LINE('',#53972,#53973); +#53972 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53973 = VECTOR('',#53974,1.); +#53974 = DIRECTION('',(0.,-1.,0.)); +#53975 = PLANE('',#53976); +#53976 = AXIS2_PLACEMENT_3D('',#53977,#53978,#53979); +#53977 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53978 = DIRECTION('',(1.,0.,0.)); +#53979 = DIRECTION('',(0.,-1.,0.)); +#53980 = ADVANCED_FACE('',(#53981,#54120,#54154,#54188),#54222,.F.); +#53981 = FACE_BOUND('',#53982,.F.); +#53982 = EDGE_LOOP('',(#53983,#53984,#53985,#53993,#54001,#54009,#54017, + #54025,#54033,#54041,#54049,#54057,#54065,#54073,#54081,#54089, + #54097,#54105,#54113,#54119)); +#53983 = ORIENTED_EDGE('',*,*,#53908,.T.); +#53984 = ORIENTED_EDGE('',*,*,#53970,.T.); +#53985 = ORIENTED_EDGE('',*,*,#53986,.T.); +#53986 = EDGE_CURVE('',#53963,#53987,#53989,.T.); +#53987 = VERTEX_POINT('',#53988); +#53988 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#53989 = LINE('',#53990,#53991); +#53990 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#53991 = VECTOR('',#53992,1.); +#53992 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#53993 = ORIENTED_EDGE('',*,*,#53994,.T.); +#53994 = EDGE_CURVE('',#53987,#53995,#53997,.T.); +#53995 = VERTEX_POINT('',#53996); +#53996 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#53997 = LINE('',#53998,#53999); +#53998 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#53999 = VECTOR('',#54000,1.); +#54000 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54001 = ORIENTED_EDGE('',*,*,#54002,.T.); +#54002 = EDGE_CURVE('',#53995,#54003,#54005,.T.); +#54003 = VERTEX_POINT('',#54004); +#54004 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54005 = LINE('',#54006,#54007); +#54006 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#54007 = VECTOR('',#54008,1.); +#54008 = DIRECTION('',(0.,-1.,0.)); +#54009 = ORIENTED_EDGE('',*,*,#54010,.T.); +#54010 = EDGE_CURVE('',#54003,#54011,#54013,.T.); +#54011 = VERTEX_POINT('',#54012); +#54012 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54013 = LINE('',#54014,#54015); +#54014 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54015 = VECTOR('',#54016,1.); +#54016 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54017 = ORIENTED_EDGE('',*,*,#54018,.T.); +#54018 = EDGE_CURVE('',#54011,#54019,#54021,.T.); +#54019 = VERTEX_POINT('',#54020); +#54020 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54021 = LINE('',#54022,#54023); +#54022 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54023 = VECTOR('',#54024,1.); +#54024 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54025 = ORIENTED_EDGE('',*,*,#54026,.T.); +#54026 = EDGE_CURVE('',#54019,#54027,#54029,.T.); +#54027 = VERTEX_POINT('',#54028); +#54028 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54029 = LINE('',#54030,#54031); +#54030 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54031 = VECTOR('',#54032,1.); +#54032 = DIRECTION('',(0.,-1.,0.)); +#54033 = ORIENTED_EDGE('',*,*,#54034,.T.); +#54034 = EDGE_CURVE('',#54027,#54035,#54037,.T.); +#54035 = VERTEX_POINT('',#54036); +#54036 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54037 = LINE('',#54038,#54039); +#54038 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54039 = VECTOR('',#54040,1.); +#54040 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54041 = ORIENTED_EDGE('',*,*,#54042,.T.); +#54042 = EDGE_CURVE('',#54035,#54043,#54045,.T.); +#54043 = VERTEX_POINT('',#54044); +#54044 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54045 = LINE('',#54046,#54047); +#54046 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54047 = VECTOR('',#54048,1.); +#54048 = DIRECTION('',(1.,0.,0.)); +#54049 = ORIENTED_EDGE('',*,*,#54050,.T.); +#54050 = EDGE_CURVE('',#54043,#54051,#54053,.T.); +#54051 = VERTEX_POINT('',#54052); +#54052 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54053 = LINE('',#54054,#54055); +#54054 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54055 = VECTOR('',#54056,1.); +#54056 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54057 = ORIENTED_EDGE('',*,*,#54058,.T.); +#54058 = EDGE_CURVE('',#54051,#54059,#54061,.T.); +#54059 = VERTEX_POINT('',#54060); +#54060 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54061 = LINE('',#54062,#54063); +#54062 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54063 = VECTOR('',#54064,1.); +#54064 = DIRECTION('',(0.,1.,0.)); +#54065 = ORIENTED_EDGE('',*,*,#54066,.T.); +#54066 = EDGE_CURVE('',#54059,#54067,#54069,.T.); +#54067 = VERTEX_POINT('',#54068); +#54068 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54069 = LINE('',#54070,#54071); +#54070 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54071 = VECTOR('',#54072,1.); +#54072 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54073 = ORIENTED_EDGE('',*,*,#54074,.T.); +#54074 = EDGE_CURVE('',#54067,#54075,#54077,.T.); +#54075 = VERTEX_POINT('',#54076); +#54076 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54077 = LINE('',#54078,#54079); +#54078 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54079 = VECTOR('',#54080,1.); +#54080 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54081 = ORIENTED_EDGE('',*,*,#54082,.T.); +#54082 = EDGE_CURVE('',#54075,#54083,#54085,.T.); +#54083 = VERTEX_POINT('',#54084); +#54084 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54085 = LINE('',#54086,#54087); +#54086 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54087 = VECTOR('',#54088,1.); +#54088 = DIRECTION('',(0.,1.,0.)); +#54089 = ORIENTED_EDGE('',*,*,#54090,.T.); +#54090 = EDGE_CURVE('',#54083,#54091,#54093,.T.); +#54091 = VERTEX_POINT('',#54092); +#54092 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54093 = LINE('',#54094,#54095); +#54094 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54095 = VECTOR('',#54096,1.); +#54096 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54097 = ORIENTED_EDGE('',*,*,#54098,.T.); +#54098 = EDGE_CURVE('',#54091,#54099,#54101,.T.); +#54099 = VERTEX_POINT('',#54100); +#54100 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54101 = LINE('',#54102,#54103); +#54102 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54103 = VECTOR('',#54104,1.); +#54104 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54105 = ORIENTED_EDGE('',*,*,#54106,.T.); +#54106 = EDGE_CURVE('',#54099,#54107,#54109,.T.); +#54107 = VERTEX_POINT('',#54108); +#54108 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54109 = LINE('',#54110,#54111); +#54110 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54111 = VECTOR('',#54112,1.); +#54112 = DIRECTION('',(0.,1.,0.)); +#54113 = ORIENTED_EDGE('',*,*,#54114,.T.); +#54114 = EDGE_CURVE('',#54107,#53923,#54115,.T.); +#54115 = LINE('',#54116,#54117); +#54116 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54117 = VECTOR('',#54118,1.); +#54118 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54119 = ORIENTED_EDGE('',*,*,#53939,.T.); +#54120 = FACE_BOUND('',#54121,.F.); +#54121 = EDGE_LOOP('',(#54122,#54132,#54140,#54148)); +#54122 = ORIENTED_EDGE('',*,*,#54123,.F.); +#54123 = EDGE_CURVE('',#54124,#54126,#54128,.T.); +#54124 = VERTEX_POINT('',#54125); +#54125 = CARTESIAN_POINT('',(0.32,-0.32,0.)); +#54126 = VERTEX_POINT('',#54127); +#54127 = CARTESIAN_POINT('',(0.32,0.32,0.)); +#54128 = LINE('',#54129,#54130); +#54129 = CARTESIAN_POINT('',(0.32,-1.43,0.)); +#54130 = VECTOR('',#54131,1.); +#54131 = DIRECTION('',(0.,1.,0.)); +#54132 = ORIENTED_EDGE('',*,*,#54133,.T.); +#54133 = EDGE_CURVE('',#54124,#54134,#54136,.T.); +#54134 = VERTEX_POINT('',#54135); +#54135 = CARTESIAN_POINT('',(-0.32,-0.32,0.)); +#54136 = LINE('',#54137,#54138); +#54137 = CARTESIAN_POINT('',(-0.16,-0.32,0.)); +#54138 = VECTOR('',#54139,1.); +#54139 = DIRECTION('',(-1.,0.,0.)); +#54140 = ORIENTED_EDGE('',*,*,#54141,.T.); +#54141 = EDGE_CURVE('',#54134,#54142,#54144,.T.); +#54142 = VERTEX_POINT('',#54143); +#54143 = CARTESIAN_POINT('',(-0.32,0.32,0.)); +#54144 = LINE('',#54145,#54146); +#54145 = CARTESIAN_POINT('',(-0.32,-1.43,0.)); +#54146 = VECTOR('',#54147,1.); +#54147 = DIRECTION('',(0.,1.,0.)); +#54148 = ORIENTED_EDGE('',*,*,#54149,.F.); +#54149 = EDGE_CURVE('',#54126,#54142,#54150,.T.); +#54150 = LINE('',#54151,#54152); +#54151 = CARTESIAN_POINT('',(-0.16,0.32,0.)); +#54152 = VECTOR('',#54153,1.); +#54153 = DIRECTION('',(-1.,0.,0.)); +#54154 = FACE_BOUND('',#54155,.F.); +#54155 = EDGE_LOOP('',(#54156,#54166,#54174,#54182)); +#54156 = ORIENTED_EDGE('',*,*,#54157,.T.); +#54157 = EDGE_CURVE('',#54158,#54160,#54162,.T.); +#54158 = VERTEX_POINT('',#54159); +#54159 = CARTESIAN_POINT('',(0.32,-2.86,0.)); +#54160 = VERTEX_POINT('',#54161); +#54161 = CARTESIAN_POINT('',(-0.32,-2.86,0.)); +#54162 = LINE('',#54163,#54164); +#54163 = CARTESIAN_POINT('',(-0.16,-2.86,0.)); +#54164 = VECTOR('',#54165,1.); +#54165 = DIRECTION('',(-1.,0.,0.)); +#54166 = ORIENTED_EDGE('',*,*,#54167,.T.); +#54167 = EDGE_CURVE('',#54160,#54168,#54170,.T.); +#54168 = VERTEX_POINT('',#54169); +#54169 = CARTESIAN_POINT('',(-0.32,-2.22,0.)); +#54170 = LINE('',#54171,#54172); +#54171 = CARTESIAN_POINT('',(-0.32,-2.7,0.)); +#54172 = VECTOR('',#54173,1.); +#54173 = DIRECTION('',(0.,1.,0.)); +#54174 = ORIENTED_EDGE('',*,*,#54175,.F.); +#54175 = EDGE_CURVE('',#54176,#54168,#54178,.T.); +#54176 = VERTEX_POINT('',#54177); +#54177 = CARTESIAN_POINT('',(0.32,-2.22,0.)); +#54178 = LINE('',#54179,#54180); +#54179 = CARTESIAN_POINT('',(-0.16,-2.22,0.)); +#54180 = VECTOR('',#54181,1.); +#54181 = DIRECTION('',(-1.,0.,0.)); +#54182 = ORIENTED_EDGE('',*,*,#54183,.F.); +#54183 = EDGE_CURVE('',#54158,#54176,#54184,.T.); +#54184 = LINE('',#54185,#54186); +#54185 = CARTESIAN_POINT('',(0.32,-2.7,0.)); +#54186 = VECTOR('',#54187,1.); +#54187 = DIRECTION('',(0.,1.,0.)); +#54188 = FACE_BOUND('',#54189,.F.); +#54189 = EDGE_LOOP('',(#54190,#54200,#54208,#54216)); +#54190 = ORIENTED_EDGE('',*,*,#54191,.F.); +#54191 = EDGE_CURVE('',#54192,#54194,#54196,.T.); +#54192 = VERTEX_POINT('',#54193); +#54193 = CARTESIAN_POINT('',(0.32,-4.76,0.)); +#54194 = VERTEX_POINT('',#54195); +#54195 = CARTESIAN_POINT('',(-0.32,-4.76,0.)); +#54196 = LINE('',#54197,#54198); +#54197 = CARTESIAN_POINT('',(-0.16,-4.76,0.)); +#54198 = VECTOR('',#54199,1.); +#54199 = DIRECTION('',(-1.,0.,0.)); +#54200 = ORIENTED_EDGE('',*,*,#54201,.F.); +#54201 = EDGE_CURVE('',#54202,#54192,#54204,.T.); +#54202 = VERTEX_POINT('',#54203); +#54203 = CARTESIAN_POINT('',(0.32,-5.4,0.)); +#54204 = LINE('',#54205,#54206); +#54205 = CARTESIAN_POINT('',(0.32,-3.97,0.)); +#54206 = VECTOR('',#54207,1.); +#54207 = DIRECTION('',(0.,1.,0.)); +#54208 = ORIENTED_EDGE('',*,*,#54209,.T.); +#54209 = EDGE_CURVE('',#54202,#54210,#54212,.T.); +#54210 = VERTEX_POINT('',#54211); +#54211 = CARTESIAN_POINT('',(-0.32,-5.4,0.)); +#54212 = LINE('',#54213,#54214); +#54213 = CARTESIAN_POINT('',(-0.16,-5.4,0.)); +#54214 = VECTOR('',#54215,1.); +#54215 = DIRECTION('',(-1.,0.,0.)); +#54216 = ORIENTED_EDGE('',*,*,#54217,.T.); +#54217 = EDGE_CURVE('',#54210,#54194,#54218,.T.); +#54218 = LINE('',#54219,#54220); +#54219 = CARTESIAN_POINT('',(-0.32,-3.97,0.)); +#54220 = VECTOR('',#54221,1.); +#54221 = DIRECTION('',(0.,1.,0.)); +#54222 = PLANE('',#54223); +#54223 = AXIS2_PLACEMENT_3D('',#54224,#54225,#54226); +#54224 = CARTESIAN_POINT('',(5.398204781459E-17,-2.54,0.)); +#54225 = DIRECTION('',(0.,0.,1.)); +#54226 = DIRECTION('',(1.,0.,-0.)); +#54227 = ADVANCED_FACE('',(#54228,#54367,#54401,#54435),#54469,.T.); +#54228 = FACE_BOUND('',#54229,.T.); +#54229 = EDGE_LOOP('',(#54230,#54231,#54232,#54240,#54248,#54256,#54264, + #54272,#54280,#54288,#54296,#54304,#54312,#54320,#54328,#54336, + #54344,#54352,#54360,#54366)); +#54230 = ORIENTED_EDGE('',*,*,#53892,.T.); +#54231 = ORIENTED_EDGE('',*,*,#53954,.T.); +#54232 = ORIENTED_EDGE('',*,*,#54233,.T.); +#54233 = EDGE_CURVE('',#53955,#54234,#54236,.T.); +#54234 = VERTEX_POINT('',#54235); +#54235 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#54236 = LINE('',#54237,#54238); +#54237 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#54238 = VECTOR('',#54239,1.); +#54239 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54240 = ORIENTED_EDGE('',*,*,#54241,.T.); +#54241 = EDGE_CURVE('',#54234,#54242,#54244,.T.); +#54242 = VERTEX_POINT('',#54243); +#54243 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#54244 = LINE('',#54245,#54246); +#54245 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#54246 = VECTOR('',#54247,1.); +#54247 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54248 = ORIENTED_EDGE('',*,*,#54249,.T.); +#54249 = EDGE_CURVE('',#54242,#54250,#54252,.T.); +#54250 = VERTEX_POINT('',#54251); +#54251 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#54252 = LINE('',#54253,#54254); +#54253 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#54254 = VECTOR('',#54255,1.); +#54255 = DIRECTION('',(0.,-1.,0.)); +#54256 = ORIENTED_EDGE('',*,*,#54257,.T.); +#54257 = EDGE_CURVE('',#54250,#54258,#54260,.T.); +#54258 = VERTEX_POINT('',#54259); +#54259 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#54260 = LINE('',#54261,#54262); +#54261 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#54262 = VECTOR('',#54263,1.); +#54263 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54264 = ORIENTED_EDGE('',*,*,#54265,.T.); +#54265 = EDGE_CURVE('',#54258,#54266,#54268,.T.); +#54266 = VERTEX_POINT('',#54267); +#54267 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#54268 = LINE('',#54269,#54270); +#54269 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#54270 = VECTOR('',#54271,1.); +#54271 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54272 = ORIENTED_EDGE('',*,*,#54273,.T.); +#54273 = EDGE_CURVE('',#54266,#54274,#54276,.T.); +#54274 = VERTEX_POINT('',#54275); +#54275 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#54276 = LINE('',#54277,#54278); +#54277 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#54278 = VECTOR('',#54279,1.); +#54279 = DIRECTION('',(0.,-1.,0.)); +#54280 = ORIENTED_EDGE('',*,*,#54281,.T.); +#54281 = EDGE_CURVE('',#54274,#54282,#54284,.T.); +#54282 = VERTEX_POINT('',#54283); +#54283 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#54284 = LINE('',#54285,#54286); +#54285 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#54286 = VECTOR('',#54287,1.); +#54287 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54288 = ORIENTED_EDGE('',*,*,#54289,.T.); +#54289 = EDGE_CURVE('',#54282,#54290,#54292,.T.); +#54290 = VERTEX_POINT('',#54291); +#54291 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#54292 = LINE('',#54293,#54294); +#54293 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#54294 = VECTOR('',#54295,1.); +#54295 = DIRECTION('',(1.,0.,0.)); +#54296 = ORIENTED_EDGE('',*,*,#54297,.T.); +#54297 = EDGE_CURVE('',#54290,#54298,#54300,.T.); +#54298 = VERTEX_POINT('',#54299); +#54299 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#54300 = LINE('',#54301,#54302); +#54301 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#54302 = VECTOR('',#54303,1.); +#54303 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54304 = ORIENTED_EDGE('',*,*,#54305,.T.); +#54305 = EDGE_CURVE('',#54298,#54306,#54308,.T.); +#54306 = VERTEX_POINT('',#54307); +#54307 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#54308 = LINE('',#54309,#54310); +#54309 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#54310 = VECTOR('',#54311,1.); +#54311 = DIRECTION('',(0.,1.,0.)); +#54312 = ORIENTED_EDGE('',*,*,#54313,.T.); +#54313 = EDGE_CURVE('',#54306,#54314,#54316,.T.); +#54314 = VERTEX_POINT('',#54315); +#54315 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#54316 = LINE('',#54317,#54318); +#54317 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#54318 = VECTOR('',#54319,1.); +#54319 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54320 = ORIENTED_EDGE('',*,*,#54321,.T.); +#54321 = EDGE_CURVE('',#54314,#54322,#54324,.T.); +#54322 = VERTEX_POINT('',#54323); +#54323 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#54324 = LINE('',#54325,#54326); +#54325 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#54326 = VECTOR('',#54327,1.); +#54327 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54328 = ORIENTED_EDGE('',*,*,#54329,.T.); +#54329 = EDGE_CURVE('',#54322,#54330,#54332,.T.); +#54330 = VERTEX_POINT('',#54331); +#54331 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#54332 = LINE('',#54333,#54334); +#54333 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#54334 = VECTOR('',#54335,1.); +#54335 = DIRECTION('',(0.,1.,0.)); +#54336 = ORIENTED_EDGE('',*,*,#54337,.T.); +#54337 = EDGE_CURVE('',#54330,#54338,#54340,.T.); +#54338 = VERTEX_POINT('',#54339); +#54339 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#54340 = LINE('',#54341,#54342); +#54341 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#54342 = VECTOR('',#54343,1.); +#54343 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54344 = ORIENTED_EDGE('',*,*,#54345,.T.); +#54345 = EDGE_CURVE('',#54338,#54346,#54348,.T.); +#54346 = VERTEX_POINT('',#54347); +#54347 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#54348 = LINE('',#54349,#54350); +#54349 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#54350 = VECTOR('',#54351,1.); +#54351 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54352 = ORIENTED_EDGE('',*,*,#54353,.T.); +#54353 = EDGE_CURVE('',#54346,#54354,#54356,.T.); +#54354 = VERTEX_POINT('',#54355); +#54355 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#54356 = LINE('',#54357,#54358); +#54357 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#54358 = VECTOR('',#54359,1.); +#54359 = DIRECTION('',(0.,1.,0.)); +#54360 = ORIENTED_EDGE('',*,*,#54361,.T.); +#54361 = EDGE_CURVE('',#54354,#53925,#54362,.T.); +#54362 = LINE('',#54363,#54364); +#54363 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#54364 = VECTOR('',#54365,1.); +#54365 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54366 = ORIENTED_EDGE('',*,*,#53932,.T.); +#54367 = FACE_BOUND('',#54368,.T.); +#54368 = EDGE_LOOP('',(#54369,#54379,#54387,#54395)); +#54369 = ORIENTED_EDGE('',*,*,#54370,.F.); +#54370 = EDGE_CURVE('',#54371,#54373,#54375,.T.); +#54371 = VERTEX_POINT('',#54372); +#54372 = CARTESIAN_POINT('',(0.32,-0.32,2.54)); +#54373 = VERTEX_POINT('',#54374); +#54374 = CARTESIAN_POINT('',(0.32,0.32,2.54)); +#54375 = LINE('',#54376,#54377); +#54376 = CARTESIAN_POINT('',(0.32,-1.43,2.54)); +#54377 = VECTOR('',#54378,1.); +#54378 = DIRECTION('',(0.,1.,0.)); +#54379 = ORIENTED_EDGE('',*,*,#54380,.T.); +#54380 = EDGE_CURVE('',#54371,#54381,#54383,.T.); +#54381 = VERTEX_POINT('',#54382); +#54382 = CARTESIAN_POINT('',(-0.32,-0.32,2.54)); +#54383 = LINE('',#54384,#54385); +#54384 = CARTESIAN_POINT('',(-0.16,-0.32,2.54)); +#54385 = VECTOR('',#54386,1.); +#54386 = DIRECTION('',(-1.,0.,0.)); +#54387 = ORIENTED_EDGE('',*,*,#54388,.T.); +#54388 = EDGE_CURVE('',#54381,#54389,#54391,.T.); +#54389 = VERTEX_POINT('',#54390); +#54390 = CARTESIAN_POINT('',(-0.32,0.32,2.54)); +#54391 = LINE('',#54392,#54393); +#54392 = CARTESIAN_POINT('',(-0.32,-1.43,2.54)); +#54393 = VECTOR('',#54394,1.); +#54394 = DIRECTION('',(0.,1.,0.)); +#54395 = ORIENTED_EDGE('',*,*,#54396,.F.); +#54396 = EDGE_CURVE('',#54373,#54389,#54397,.T.); +#54397 = LINE('',#54398,#54399); +#54398 = CARTESIAN_POINT('',(-0.16,0.32,2.54)); +#54399 = VECTOR('',#54400,1.); +#54400 = DIRECTION('',(-1.,0.,0.)); +#54401 = FACE_BOUND('',#54402,.T.); +#54402 = EDGE_LOOP('',(#54403,#54413,#54421,#54429)); +#54403 = ORIENTED_EDGE('',*,*,#54404,.T.); +#54404 = EDGE_CURVE('',#54405,#54407,#54409,.T.); +#54405 = VERTEX_POINT('',#54406); +#54406 = CARTESIAN_POINT('',(0.32,-2.86,2.54)); +#54407 = VERTEX_POINT('',#54408); +#54408 = CARTESIAN_POINT('',(-0.32,-2.86,2.54)); +#54409 = LINE('',#54410,#54411); +#54410 = CARTESIAN_POINT('',(-0.16,-2.86,2.54)); +#54411 = VECTOR('',#54412,1.); +#54412 = DIRECTION('',(-1.,0.,0.)); +#54413 = ORIENTED_EDGE('',*,*,#54414,.T.); +#54414 = EDGE_CURVE('',#54407,#54415,#54417,.T.); +#54415 = VERTEX_POINT('',#54416); +#54416 = CARTESIAN_POINT('',(-0.32,-2.22,2.54)); +#54417 = LINE('',#54418,#54419); +#54418 = CARTESIAN_POINT('',(-0.32,-2.7,2.54)); +#54419 = VECTOR('',#54420,1.); +#54420 = DIRECTION('',(0.,1.,0.)); +#54421 = ORIENTED_EDGE('',*,*,#54422,.F.); +#54422 = EDGE_CURVE('',#54423,#54415,#54425,.T.); +#54423 = VERTEX_POINT('',#54424); +#54424 = CARTESIAN_POINT('',(0.32,-2.22,2.54)); +#54425 = LINE('',#54426,#54427); +#54426 = CARTESIAN_POINT('',(-0.16,-2.22,2.54)); +#54427 = VECTOR('',#54428,1.); +#54428 = DIRECTION('',(-1.,0.,0.)); +#54429 = ORIENTED_EDGE('',*,*,#54430,.F.); +#54430 = EDGE_CURVE('',#54405,#54423,#54431,.T.); +#54431 = LINE('',#54432,#54433); +#54432 = CARTESIAN_POINT('',(0.32,-2.7,2.54)); +#54433 = VECTOR('',#54434,1.); +#54434 = DIRECTION('',(0.,1.,0.)); +#54435 = FACE_BOUND('',#54436,.T.); +#54436 = EDGE_LOOP('',(#54437,#54447,#54455,#54463)); +#54437 = ORIENTED_EDGE('',*,*,#54438,.F.); +#54438 = EDGE_CURVE('',#54439,#54441,#54443,.T.); +#54439 = VERTEX_POINT('',#54440); +#54440 = CARTESIAN_POINT('',(0.32,-4.76,2.54)); +#54441 = VERTEX_POINT('',#54442); +#54442 = CARTESIAN_POINT('',(-0.32,-4.76,2.54)); +#54443 = LINE('',#54444,#54445); +#54444 = CARTESIAN_POINT('',(-0.16,-4.76,2.54)); +#54445 = VECTOR('',#54446,1.); +#54446 = DIRECTION('',(-1.,0.,0.)); +#54447 = ORIENTED_EDGE('',*,*,#54448,.F.); +#54448 = EDGE_CURVE('',#54449,#54439,#54451,.T.); +#54449 = VERTEX_POINT('',#54450); +#54450 = CARTESIAN_POINT('',(0.32,-5.4,2.54)); +#54451 = LINE('',#54452,#54453); +#54452 = CARTESIAN_POINT('',(0.32,-3.97,2.54)); +#54453 = VECTOR('',#54454,1.); +#54454 = DIRECTION('',(0.,1.,0.)); +#54455 = ORIENTED_EDGE('',*,*,#54456,.T.); +#54456 = EDGE_CURVE('',#54449,#54457,#54459,.T.); +#54457 = VERTEX_POINT('',#54458); +#54458 = CARTESIAN_POINT('',(-0.32,-5.4,2.54)); +#54459 = LINE('',#54460,#54461); +#54460 = CARTESIAN_POINT('',(-0.16,-5.4,2.54)); +#54461 = VECTOR('',#54462,1.); +#54462 = DIRECTION('',(-1.,0.,0.)); +#54463 = ORIENTED_EDGE('',*,*,#54464,.T.); +#54464 = EDGE_CURVE('',#54457,#54441,#54465,.T.); +#54465 = LINE('',#54466,#54467); +#54466 = CARTESIAN_POINT('',(-0.32,-3.97,2.54)); +#54467 = VECTOR('',#54468,1.); +#54468 = DIRECTION('',(0.,1.,0.)); +#54469 = PLANE('',#54470); +#54470 = AXIS2_PLACEMENT_3D('',#54471,#54472,#54473); +#54471 = CARTESIAN_POINT('',(5.398204781459E-17,-2.54,2.54)); +#54472 = DIRECTION('',(0.,0.,1.)); +#54473 = DIRECTION('',(1.,0.,-0.)); +#54474 = ADVANCED_FACE('',(#54475),#54486,.F.); +#54475 = FACE_BOUND('',#54476,.F.); +#54476 = EDGE_LOOP('',(#54477,#54483,#54484,#54485)); +#54477 = ORIENTED_EDGE('',*,*,#54478,.T.); +#54478 = EDGE_CURVE('',#54107,#54354,#54479,.T.); +#54479 = LINE('',#54480,#54481); +#54480 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54481 = VECTOR('',#54482,1.); +#54482 = DIRECTION('',(0.,0.,1.)); +#54483 = ORIENTED_EDGE('',*,*,#54361,.T.); +#54484 = ORIENTED_EDGE('',*,*,#53922,.F.); +#54485 = ORIENTED_EDGE('',*,*,#54114,.F.); +#54486 = PLANE('',#54487); +#54487 = AXIS2_PLACEMENT_3D('',#54488,#54489,#54490); +#54488 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54489 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54490 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54491 = ADVANCED_FACE('',(#54492),#54503,.F.); +#54492 = FACE_BOUND('',#54493,.F.); +#54493 = EDGE_LOOP('',(#54494,#54495,#54496,#54502)); +#54494 = ORIENTED_EDGE('',*,*,#53962,.T.); +#54495 = ORIENTED_EDGE('',*,*,#54233,.T.); +#54496 = ORIENTED_EDGE('',*,*,#54497,.F.); +#54497 = EDGE_CURVE('',#53987,#54234,#54498,.T.); +#54498 = LINE('',#54499,#54500); +#54499 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#54500 = VECTOR('',#54501,1.); +#54501 = DIRECTION('',(0.,0.,1.)); +#54502 = ORIENTED_EDGE('',*,*,#53986,.F.); +#54503 = PLANE('',#54504); +#54504 = AXIS2_PLACEMENT_3D('',#54505,#54506,#54507); +#54505 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#54506 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54507 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54508 = ADVANCED_FACE('',(#54509),#54520,.F.); +#54509 = FACE_BOUND('',#54510,.F.); +#54510 = EDGE_LOOP('',(#54511,#54517,#54518,#54519)); +#54511 = ORIENTED_EDGE('',*,*,#54512,.T.); +#54512 = EDGE_CURVE('',#54099,#54346,#54513,.T.); +#54513 = LINE('',#54514,#54515); +#54514 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54515 = VECTOR('',#54516,1.); +#54516 = DIRECTION('',(0.,0.,1.)); +#54517 = ORIENTED_EDGE('',*,*,#54353,.T.); +#54518 = ORIENTED_EDGE('',*,*,#54478,.F.); +#54519 = ORIENTED_EDGE('',*,*,#54106,.F.); +#54520 = PLANE('',#54521); +#54521 = AXIS2_PLACEMENT_3D('',#54522,#54523,#54524); +#54522 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54523 = DIRECTION('',(-1.,0.,0.)); +#54524 = DIRECTION('',(0.,1.,0.)); +#54525 = ADVANCED_FACE('',(#54526),#54537,.F.); +#54526 = FACE_BOUND('',#54527,.F.); +#54527 = EDGE_LOOP('',(#54528,#54529,#54530,#54536)); +#54528 = ORIENTED_EDGE('',*,*,#54497,.T.); +#54529 = ORIENTED_EDGE('',*,*,#54241,.T.); +#54530 = ORIENTED_EDGE('',*,*,#54531,.F.); +#54531 = EDGE_CURVE('',#53995,#54242,#54532,.T.); +#54532 = LINE('',#54533,#54534); +#54533 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#54534 = VECTOR('',#54535,1.); +#54535 = DIRECTION('',(0.,0.,1.)); +#54536 = ORIENTED_EDGE('',*,*,#53994,.F.); +#54537 = PLANE('',#54538); +#54538 = AXIS2_PLACEMENT_3D('',#54539,#54540,#54541); +#54539 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#54540 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54541 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54542 = ADVANCED_FACE('',(#54543),#54554,.F.); +#54543 = FACE_BOUND('',#54544,.F.); +#54544 = EDGE_LOOP('',(#54545,#54551,#54552,#54553)); +#54545 = ORIENTED_EDGE('',*,*,#54546,.T.); +#54546 = EDGE_CURVE('',#54091,#54338,#54547,.T.); +#54547 = LINE('',#54548,#54549); +#54548 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54549 = VECTOR('',#54550,1.); +#54550 = DIRECTION('',(0.,0.,1.)); +#54551 = ORIENTED_EDGE('',*,*,#54345,.T.); +#54552 = ORIENTED_EDGE('',*,*,#54512,.F.); +#54553 = ORIENTED_EDGE('',*,*,#54098,.F.); +#54554 = PLANE('',#54555); +#54555 = AXIS2_PLACEMENT_3D('',#54556,#54557,#54558); +#54556 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54557 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54558 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54559 = ADVANCED_FACE('',(#54560),#54571,.F.); +#54560 = FACE_BOUND('',#54561,.F.); +#54561 = EDGE_LOOP('',(#54562,#54563,#54564,#54570)); +#54562 = ORIENTED_EDGE('',*,*,#54531,.T.); +#54563 = ORIENTED_EDGE('',*,*,#54249,.T.); +#54564 = ORIENTED_EDGE('',*,*,#54565,.F.); +#54565 = EDGE_CURVE('',#54003,#54250,#54566,.T.); +#54566 = LINE('',#54567,#54568); +#54567 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54568 = VECTOR('',#54569,1.); +#54569 = DIRECTION('',(0.,0.,1.)); +#54570 = ORIENTED_EDGE('',*,*,#54002,.F.); +#54571 = PLANE('',#54572); +#54572 = AXIS2_PLACEMENT_3D('',#54573,#54574,#54575); +#54573 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#54574 = DIRECTION('',(1.,0.,0.)); +#54575 = DIRECTION('',(0.,-1.,0.)); +#54576 = ADVANCED_FACE('',(#54577),#54588,.F.); +#54577 = FACE_BOUND('',#54578,.F.); +#54578 = EDGE_LOOP('',(#54579,#54585,#54586,#54587)); +#54579 = ORIENTED_EDGE('',*,*,#54580,.T.); +#54580 = EDGE_CURVE('',#54083,#54330,#54581,.T.); +#54581 = LINE('',#54582,#54583); +#54582 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54583 = VECTOR('',#54584,1.); +#54584 = DIRECTION('',(0.,0.,1.)); +#54585 = ORIENTED_EDGE('',*,*,#54337,.T.); +#54586 = ORIENTED_EDGE('',*,*,#54546,.F.); +#54587 = ORIENTED_EDGE('',*,*,#54090,.F.); +#54588 = PLANE('',#54589); +#54589 = AXIS2_PLACEMENT_3D('',#54590,#54591,#54592); +#54590 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54591 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54592 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54593 = ADVANCED_FACE('',(#54594),#54605,.F.); +#54594 = FACE_BOUND('',#54595,.F.); +#54595 = EDGE_LOOP('',(#54596,#54597,#54598,#54604)); +#54596 = ORIENTED_EDGE('',*,*,#54565,.T.); +#54597 = ORIENTED_EDGE('',*,*,#54257,.T.); +#54598 = ORIENTED_EDGE('',*,*,#54599,.F.); +#54599 = EDGE_CURVE('',#54011,#54258,#54600,.T.); +#54600 = LINE('',#54601,#54602); +#54601 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54602 = VECTOR('',#54603,1.); +#54603 = DIRECTION('',(0.,0.,1.)); +#54604 = ORIENTED_EDGE('',*,*,#54010,.F.); +#54605 = PLANE('',#54606); +#54606 = AXIS2_PLACEMENT_3D('',#54607,#54608,#54609); +#54607 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54608 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54609 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54610 = ADVANCED_FACE('',(#54611),#54622,.F.); +#54611 = FACE_BOUND('',#54612,.F.); +#54612 = EDGE_LOOP('',(#54613,#54619,#54620,#54621)); +#54613 = ORIENTED_EDGE('',*,*,#54614,.T.); +#54614 = EDGE_CURVE('',#54075,#54322,#54615,.T.); +#54615 = LINE('',#54616,#54617); +#54616 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54617 = VECTOR('',#54618,1.); +#54618 = DIRECTION('',(0.,0.,1.)); +#54619 = ORIENTED_EDGE('',*,*,#54329,.T.); +#54620 = ORIENTED_EDGE('',*,*,#54580,.F.); +#54621 = ORIENTED_EDGE('',*,*,#54082,.F.); +#54622 = PLANE('',#54623); +#54623 = AXIS2_PLACEMENT_3D('',#54624,#54625,#54626); +#54624 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54625 = DIRECTION('',(-1.,0.,0.)); +#54626 = DIRECTION('',(0.,1.,0.)); +#54627 = ADVANCED_FACE('',(#54628),#54639,.F.); +#54628 = FACE_BOUND('',#54629,.F.); +#54629 = EDGE_LOOP('',(#54630,#54631,#54632,#54638)); +#54630 = ORIENTED_EDGE('',*,*,#54599,.T.); +#54631 = ORIENTED_EDGE('',*,*,#54265,.T.); +#54632 = ORIENTED_EDGE('',*,*,#54633,.F.); +#54633 = EDGE_CURVE('',#54019,#54266,#54634,.T.); +#54634 = LINE('',#54635,#54636); +#54635 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54636 = VECTOR('',#54637,1.); +#54637 = DIRECTION('',(0.,0.,1.)); +#54638 = ORIENTED_EDGE('',*,*,#54018,.F.); +#54639 = PLANE('',#54640); +#54640 = AXIS2_PLACEMENT_3D('',#54641,#54642,#54643); +#54641 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54642 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54643 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54644 = ADVANCED_FACE('',(#54645),#54656,.F.); +#54645 = FACE_BOUND('',#54646,.F.); +#54646 = EDGE_LOOP('',(#54647,#54653,#54654,#54655)); +#54647 = ORIENTED_EDGE('',*,*,#54648,.T.); +#54648 = EDGE_CURVE('',#54067,#54314,#54649,.T.); +#54649 = LINE('',#54650,#54651); +#54650 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54651 = VECTOR('',#54652,1.); +#54652 = DIRECTION('',(0.,0.,1.)); +#54653 = ORIENTED_EDGE('',*,*,#54321,.T.); +#54654 = ORIENTED_EDGE('',*,*,#54614,.F.); +#54655 = ORIENTED_EDGE('',*,*,#54074,.F.); +#54656 = PLANE('',#54657); +#54657 = AXIS2_PLACEMENT_3D('',#54658,#54659,#54660); +#54658 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54659 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54660 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54661 = ADVANCED_FACE('',(#54662),#54673,.F.); +#54662 = FACE_BOUND('',#54663,.F.); +#54663 = EDGE_LOOP('',(#54664,#54665,#54666,#54672)); +#54664 = ORIENTED_EDGE('',*,*,#54633,.T.); +#54665 = ORIENTED_EDGE('',*,*,#54273,.T.); +#54666 = ORIENTED_EDGE('',*,*,#54667,.F.); +#54667 = EDGE_CURVE('',#54027,#54274,#54668,.T.); +#54668 = LINE('',#54669,#54670); +#54669 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54670 = VECTOR('',#54671,1.); +#54671 = DIRECTION('',(0.,0.,1.)); +#54672 = ORIENTED_EDGE('',*,*,#54026,.F.); +#54673 = PLANE('',#54674); +#54674 = AXIS2_PLACEMENT_3D('',#54675,#54676,#54677); +#54675 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54676 = DIRECTION('',(1.,0.,0.)); +#54677 = DIRECTION('',(0.,-1.,0.)); +#54678 = ADVANCED_FACE('',(#54679),#54690,.F.); +#54679 = FACE_BOUND('',#54680,.F.); +#54680 = EDGE_LOOP('',(#54681,#54687,#54688,#54689)); +#54681 = ORIENTED_EDGE('',*,*,#54682,.T.); +#54682 = EDGE_CURVE('',#54059,#54306,#54683,.T.); +#54683 = LINE('',#54684,#54685); +#54684 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54685 = VECTOR('',#54686,1.); +#54686 = DIRECTION('',(0.,0.,1.)); +#54687 = ORIENTED_EDGE('',*,*,#54313,.T.); +#54688 = ORIENTED_EDGE('',*,*,#54648,.F.); +#54689 = ORIENTED_EDGE('',*,*,#54066,.F.); +#54690 = PLANE('',#54691); +#54691 = AXIS2_PLACEMENT_3D('',#54692,#54693,#54694); +#54692 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54693 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54694 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54695 = ADVANCED_FACE('',(#54696),#54707,.F.); +#54696 = FACE_BOUND('',#54697,.F.); +#54697 = EDGE_LOOP('',(#54698,#54699,#54700,#54706)); +#54698 = ORIENTED_EDGE('',*,*,#54667,.T.); +#54699 = ORIENTED_EDGE('',*,*,#54281,.T.); +#54700 = ORIENTED_EDGE('',*,*,#54701,.F.); +#54701 = EDGE_CURVE('',#54035,#54282,#54702,.T.); +#54702 = LINE('',#54703,#54704); +#54703 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54704 = VECTOR('',#54705,1.); +#54705 = DIRECTION('',(0.,0.,1.)); +#54706 = ORIENTED_EDGE('',*,*,#54034,.F.); +#54707 = PLANE('',#54708); +#54708 = AXIS2_PLACEMENT_3D('',#54709,#54710,#54711); +#54709 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54710 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54711 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54712 = ADVANCED_FACE('',(#54713),#54724,.F.); +#54713 = FACE_BOUND('',#54714,.F.); +#54714 = EDGE_LOOP('',(#54715,#54721,#54722,#54723)); +#54715 = ORIENTED_EDGE('',*,*,#54716,.T.); +#54716 = EDGE_CURVE('',#54051,#54298,#54717,.T.); +#54717 = LINE('',#54718,#54719); +#54718 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54719 = VECTOR('',#54720,1.); +#54720 = DIRECTION('',(0.,0.,1.)); +#54721 = ORIENTED_EDGE('',*,*,#54305,.T.); +#54722 = ORIENTED_EDGE('',*,*,#54682,.F.); +#54723 = ORIENTED_EDGE('',*,*,#54058,.F.); +#54724 = PLANE('',#54725); +#54725 = AXIS2_PLACEMENT_3D('',#54726,#54727,#54728); +#54726 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54727 = DIRECTION('',(-1.,0.,0.)); +#54728 = DIRECTION('',(0.,1.,0.)); +#54729 = ADVANCED_FACE('',(#54730),#54741,.F.); +#54730 = FACE_BOUND('',#54731,.F.); +#54731 = EDGE_LOOP('',(#54732,#54733,#54734,#54740)); +#54732 = ORIENTED_EDGE('',*,*,#54701,.T.); +#54733 = ORIENTED_EDGE('',*,*,#54289,.T.); +#54734 = ORIENTED_EDGE('',*,*,#54735,.F.); +#54735 = EDGE_CURVE('',#54043,#54290,#54736,.T.); +#54736 = LINE('',#54737,#54738); +#54737 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54738 = VECTOR('',#54739,1.); +#54739 = DIRECTION('',(0.,0.,1.)); +#54740 = ORIENTED_EDGE('',*,*,#54042,.F.); +#54741 = PLANE('',#54742); +#54742 = AXIS2_PLACEMENT_3D('',#54743,#54744,#54745); +#54743 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54744 = DIRECTION('',(0.,1.,0.)); +#54745 = DIRECTION('',(1.,0.,0.)); +#54746 = ADVANCED_FACE('',(#54747),#54753,.F.); +#54747 = FACE_BOUND('',#54748,.F.); +#54748 = EDGE_LOOP('',(#54749,#54750,#54751,#54752)); +#54749 = ORIENTED_EDGE('',*,*,#54735,.T.); +#54750 = ORIENTED_EDGE('',*,*,#54297,.T.); +#54751 = ORIENTED_EDGE('',*,*,#54716,.F.); +#54752 = ORIENTED_EDGE('',*,*,#54050,.F.); +#54753 = PLANE('',#54754); +#54754 = AXIS2_PLACEMENT_3D('',#54755,#54756,#54757); +#54755 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54756 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54757 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54758 = ADVANCED_FACE('',(#54759),#54784,.T.); +#54759 = FACE_BOUND('',#54760,.T.); +#54760 = EDGE_LOOP('',(#54761,#54769,#54777,#54783)); +#54761 = ORIENTED_EDGE('',*,*,#54762,.F.); +#54762 = EDGE_CURVE('',#54763,#54124,#54765,.T.); +#54763 = VERTEX_POINT('',#54764); +#54764 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#54765 = LINE('',#54766,#54767); +#54766 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#54767 = VECTOR('',#54768,1.); +#54768 = DIRECTION('',(0.,0.,1.)); +#54769 = ORIENTED_EDGE('',*,*,#54770,.T.); +#54770 = EDGE_CURVE('',#54763,#54771,#54773,.T.); +#54771 = VERTEX_POINT('',#54772); +#54772 = CARTESIAN_POINT('',(0.32,0.32,-2.84)); +#54773 = LINE('',#54774,#54775); +#54774 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#54775 = VECTOR('',#54776,1.); +#54776 = DIRECTION('',(0.,1.,0.)); +#54777 = ORIENTED_EDGE('',*,*,#54778,.T.); +#54778 = EDGE_CURVE('',#54771,#54126,#54779,.T.); +#54779 = LINE('',#54780,#54781); +#54780 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#54781 = VECTOR('',#54782,1.); +#54782 = DIRECTION('',(0.,0.,1.)); +#54783 = ORIENTED_EDGE('',*,*,#54123,.F.); +#54784 = PLANE('',#54785); +#54785 = AXIS2_PLACEMENT_3D('',#54786,#54787,#54788); +#54786 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#54787 = DIRECTION('',(1.,0.,0.)); +#54788 = DIRECTION('',(0.,0.,1.)); +#54789 = ADVANCED_FACE('',(#54790),#54808,.T.); +#54790 = FACE_BOUND('',#54791,.T.); +#54791 = EDGE_LOOP('',(#54792,#54793,#54801,#54807)); +#54792 = ORIENTED_EDGE('',*,*,#54778,.F.); +#54793 = ORIENTED_EDGE('',*,*,#54794,.F.); +#54794 = EDGE_CURVE('',#54795,#54771,#54797,.T.); +#54795 = VERTEX_POINT('',#54796); +#54796 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#54797 = LINE('',#54798,#54799); +#54798 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#54799 = VECTOR('',#54800,1.); +#54800 = DIRECTION('',(1.,0.,0.)); +#54801 = ORIENTED_EDGE('',*,*,#54802,.T.); +#54802 = EDGE_CURVE('',#54795,#54142,#54803,.T.); +#54803 = LINE('',#54804,#54805); +#54804 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#54805 = VECTOR('',#54806,1.); +#54806 = DIRECTION('',(0.,0.,1.)); +#54807 = ORIENTED_EDGE('',*,*,#54149,.F.); +#54808 = PLANE('',#54809); +#54809 = AXIS2_PLACEMENT_3D('',#54810,#54811,#54812); +#54810 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#54811 = DIRECTION('',(0.,1.,0.)); +#54812 = DIRECTION('',(0.,-0.,1.)); +#54813 = ADVANCED_FACE('',(#54814),#54832,.F.); +#54814 = FACE_BOUND('',#54815,.F.); +#54815 = EDGE_LOOP('',(#54816,#54824,#54830,#54831)); +#54816 = ORIENTED_EDGE('',*,*,#54817,.F.); +#54817 = EDGE_CURVE('',#54818,#54134,#54820,.T.); +#54818 = VERTEX_POINT('',#54819); +#54819 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#54820 = LINE('',#54821,#54822); +#54821 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#54822 = VECTOR('',#54823,1.); +#54823 = DIRECTION('',(0.,0.,1.)); +#54824 = ORIENTED_EDGE('',*,*,#54825,.T.); +#54825 = EDGE_CURVE('',#54818,#54795,#54826,.T.); +#54826 = LINE('',#54827,#54828); +#54827 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#54828 = VECTOR('',#54829,1.); +#54829 = DIRECTION('',(0.,1.,0.)); +#54830 = ORIENTED_EDGE('',*,*,#54802,.T.); +#54831 = ORIENTED_EDGE('',*,*,#54141,.F.); +#54832 = PLANE('',#54833); +#54833 = AXIS2_PLACEMENT_3D('',#54834,#54835,#54836); +#54834 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#54835 = DIRECTION('',(1.,0.,0.)); +#54836 = DIRECTION('',(0.,0.,1.)); +#54837 = ADVANCED_FACE('',(#54838),#54849,.F.); +#54838 = FACE_BOUND('',#54839,.F.); +#54839 = EDGE_LOOP('',(#54840,#54841,#54847,#54848)); +#54840 = ORIENTED_EDGE('',*,*,#54762,.F.); +#54841 = ORIENTED_EDGE('',*,*,#54842,.F.); +#54842 = EDGE_CURVE('',#54818,#54763,#54843,.T.); +#54843 = LINE('',#54844,#54845); +#54844 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#54845 = VECTOR('',#54846,1.); +#54846 = DIRECTION('',(1.,0.,0.)); +#54847 = ORIENTED_EDGE('',*,*,#54817,.T.); +#54848 = ORIENTED_EDGE('',*,*,#54133,.F.); +#54849 = PLANE('',#54850); +#54850 = AXIS2_PLACEMENT_3D('',#54851,#54852,#54853); +#54851 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#54852 = DIRECTION('',(0.,1.,0.)); +#54853 = DIRECTION('',(0.,-0.,1.)); +#54854 = ADVANCED_FACE('',(#54855),#54880,.F.); +#54855 = FACE_BOUND('',#54856,.F.); +#54856 = EDGE_LOOP('',(#54857,#54865,#54873,#54879)); +#54857 = ORIENTED_EDGE('',*,*,#54858,.F.); +#54858 = EDGE_CURVE('',#54859,#54158,#54861,.T.); +#54859 = VERTEX_POINT('',#54860); +#54860 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#54861 = LINE('',#54862,#54863); +#54862 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#54863 = VECTOR('',#54864,1.); +#54864 = DIRECTION('',(0.,0.,1.)); +#54865 = ORIENTED_EDGE('',*,*,#54866,.F.); +#54866 = EDGE_CURVE('',#54867,#54859,#54869,.T.); +#54867 = VERTEX_POINT('',#54868); +#54868 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#54869 = LINE('',#54870,#54871); +#54870 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#54871 = VECTOR('',#54872,1.); +#54872 = DIRECTION('',(1.,0.,0.)); +#54873 = ORIENTED_EDGE('',*,*,#54874,.T.); +#54874 = EDGE_CURVE('',#54867,#54160,#54875,.T.); +#54875 = LINE('',#54876,#54877); +#54876 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#54877 = VECTOR('',#54878,1.); +#54878 = DIRECTION('',(0.,0.,1.)); +#54879 = ORIENTED_EDGE('',*,*,#54157,.F.); +#54880 = PLANE('',#54881); +#54881 = AXIS2_PLACEMENT_3D('',#54882,#54883,#54884); +#54882 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#54883 = DIRECTION('',(0.,1.,0.)); +#54884 = DIRECTION('',(0.,-0.,1.)); +#54885 = ADVANCED_FACE('',(#54886),#54904,.T.); +#54886 = FACE_BOUND('',#54887,.T.); +#54887 = EDGE_LOOP('',(#54888,#54889,#54897,#54903)); +#54888 = ORIENTED_EDGE('',*,*,#54858,.F.); +#54889 = ORIENTED_EDGE('',*,*,#54890,.T.); +#54890 = EDGE_CURVE('',#54859,#54891,#54893,.T.); +#54891 = VERTEX_POINT('',#54892); +#54892 = CARTESIAN_POINT('',(0.32,-2.22,-2.84)); +#54893 = LINE('',#54894,#54895); +#54894 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#54895 = VECTOR('',#54896,1.); +#54896 = DIRECTION('',(0.,1.,0.)); +#54897 = ORIENTED_EDGE('',*,*,#54898,.T.); +#54898 = EDGE_CURVE('',#54891,#54176,#54899,.T.); +#54899 = LINE('',#54900,#54901); +#54900 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#54901 = VECTOR('',#54902,1.); +#54902 = DIRECTION('',(0.,0.,1.)); +#54903 = ORIENTED_EDGE('',*,*,#54183,.F.); +#54904 = PLANE('',#54905); +#54905 = AXIS2_PLACEMENT_3D('',#54906,#54907,#54908); +#54906 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#54907 = DIRECTION('',(1.,0.,0.)); +#54908 = DIRECTION('',(0.,0.,1.)); +#54909 = ADVANCED_FACE('',(#54910),#54928,.T.); +#54910 = FACE_BOUND('',#54911,.T.); +#54911 = EDGE_LOOP('',(#54912,#54913,#54921,#54927)); +#54912 = ORIENTED_EDGE('',*,*,#54898,.F.); +#54913 = ORIENTED_EDGE('',*,*,#54914,.F.); +#54914 = EDGE_CURVE('',#54915,#54891,#54917,.T.); +#54915 = VERTEX_POINT('',#54916); +#54916 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#54917 = LINE('',#54918,#54919); +#54918 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#54919 = VECTOR('',#54920,1.); +#54920 = DIRECTION('',(1.,0.,0.)); +#54921 = ORIENTED_EDGE('',*,*,#54922,.T.); +#54922 = EDGE_CURVE('',#54915,#54168,#54923,.T.); +#54923 = LINE('',#54924,#54925); +#54924 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#54925 = VECTOR('',#54926,1.); +#54926 = DIRECTION('',(0.,0.,1.)); +#54927 = ORIENTED_EDGE('',*,*,#54175,.F.); +#54928 = PLANE('',#54929); +#54929 = AXIS2_PLACEMENT_3D('',#54930,#54931,#54932); +#54930 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#54931 = DIRECTION('',(0.,1.,0.)); +#54932 = DIRECTION('',(0.,-0.,1.)); +#54933 = ADVANCED_FACE('',(#54934),#54945,.F.); +#54934 = FACE_BOUND('',#54935,.F.); +#54935 = EDGE_LOOP('',(#54936,#54937,#54943,#54944)); +#54936 = ORIENTED_EDGE('',*,*,#54874,.F.); +#54937 = ORIENTED_EDGE('',*,*,#54938,.T.); +#54938 = EDGE_CURVE('',#54867,#54915,#54939,.T.); +#54939 = LINE('',#54940,#54941); +#54940 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#54941 = VECTOR('',#54942,1.); +#54942 = DIRECTION('',(0.,1.,0.)); +#54943 = ORIENTED_EDGE('',*,*,#54922,.T.); +#54944 = ORIENTED_EDGE('',*,*,#54167,.F.); +#54945 = PLANE('',#54946); +#54946 = AXIS2_PLACEMENT_3D('',#54947,#54948,#54949); +#54947 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#54948 = DIRECTION('',(1.,0.,0.)); +#54949 = DIRECTION('',(0.,0.,1.)); +#54950 = ADVANCED_FACE('',(#54951),#54976,.T.); +#54951 = FACE_BOUND('',#54952,.T.); +#54952 = EDGE_LOOP('',(#54953,#54961,#54969,#54975)); +#54953 = ORIENTED_EDGE('',*,*,#54954,.F.); +#54954 = EDGE_CURVE('',#54955,#54192,#54957,.T.); +#54955 = VERTEX_POINT('',#54956); +#54956 = CARTESIAN_POINT('',(0.32,-4.76,-2.84)); +#54957 = LINE('',#54958,#54959); +#54958 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#54959 = VECTOR('',#54960,1.); +#54960 = DIRECTION('',(0.,0.,1.)); +#54961 = ORIENTED_EDGE('',*,*,#54962,.F.); +#54962 = EDGE_CURVE('',#54963,#54955,#54965,.T.); +#54963 = VERTEX_POINT('',#54964); +#54964 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#54965 = LINE('',#54966,#54967); +#54966 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#54967 = VECTOR('',#54968,1.); +#54968 = DIRECTION('',(1.,0.,0.)); +#54969 = ORIENTED_EDGE('',*,*,#54970,.T.); +#54970 = EDGE_CURVE('',#54963,#54194,#54971,.T.); +#54971 = LINE('',#54972,#54973); +#54972 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#54973 = VECTOR('',#54974,1.); +#54974 = DIRECTION('',(0.,0.,1.)); +#54975 = ORIENTED_EDGE('',*,*,#54191,.F.); +#54976 = PLANE('',#54977); +#54977 = AXIS2_PLACEMENT_3D('',#54978,#54979,#54980); +#54978 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#54979 = DIRECTION('',(0.,1.,0.)); +#54980 = DIRECTION('',(0.,-0.,1.)); +#54981 = ADVANCED_FACE('',(#54982),#55000,.F.); +#54982 = FACE_BOUND('',#54983,.F.); +#54983 = EDGE_LOOP('',(#54984,#54992,#54998,#54999)); +#54984 = ORIENTED_EDGE('',*,*,#54985,.F.); +#54985 = EDGE_CURVE('',#54986,#54210,#54988,.T.); +#54986 = VERTEX_POINT('',#54987); +#54987 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#54988 = LINE('',#54989,#54990); +#54989 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#54990 = VECTOR('',#54991,1.); +#54991 = DIRECTION('',(0.,0.,1.)); +#54992 = ORIENTED_EDGE('',*,*,#54993,.T.); +#54993 = EDGE_CURVE('',#54986,#54963,#54994,.T.); +#54994 = LINE('',#54995,#54996); +#54995 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#54996 = VECTOR('',#54997,1.); +#54997 = DIRECTION('',(0.,1.,0.)); +#54998 = ORIENTED_EDGE('',*,*,#54970,.T.); +#54999 = ORIENTED_EDGE('',*,*,#54217,.F.); +#55000 = PLANE('',#55001); +#55001 = AXIS2_PLACEMENT_3D('',#55002,#55003,#55004); +#55002 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55003 = DIRECTION('',(1.,0.,0.)); +#55004 = DIRECTION('',(0.,0.,1.)); +#55005 = ADVANCED_FACE('',(#55006),#55024,.F.); +#55006 = FACE_BOUND('',#55007,.F.); +#55007 = EDGE_LOOP('',(#55008,#55016,#55022,#55023)); +#55008 = ORIENTED_EDGE('',*,*,#55009,.F.); +#55009 = EDGE_CURVE('',#55010,#54202,#55012,.T.); +#55010 = VERTEX_POINT('',#55011); +#55011 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#55012 = LINE('',#55013,#55014); +#55013 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55014 = VECTOR('',#55015,1.); +#55015 = DIRECTION('',(0.,0.,1.)); +#55016 = ORIENTED_EDGE('',*,*,#55017,.F.); +#55017 = EDGE_CURVE('',#54986,#55010,#55018,.T.); +#55018 = LINE('',#55019,#55020); +#55019 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#55020 = VECTOR('',#55021,1.); +#55021 = DIRECTION('',(1.,0.,0.)); +#55022 = ORIENTED_EDGE('',*,*,#54985,.T.); +#55023 = ORIENTED_EDGE('',*,*,#54209,.F.); +#55024 = PLANE('',#55025); +#55025 = AXIS2_PLACEMENT_3D('',#55026,#55027,#55028); +#55026 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55027 = DIRECTION('',(0.,1.,0.)); +#55028 = DIRECTION('',(0.,-0.,1.)); +#55029 = ADVANCED_FACE('',(#55030),#55041,.T.); +#55030 = FACE_BOUND('',#55031,.T.); +#55031 = EDGE_LOOP('',(#55032,#55033,#55039,#55040)); +#55032 = ORIENTED_EDGE('',*,*,#55009,.F.); +#55033 = ORIENTED_EDGE('',*,*,#55034,.T.); +#55034 = EDGE_CURVE('',#55010,#54955,#55035,.T.); +#55035 = LINE('',#55036,#55037); +#55036 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#55037 = VECTOR('',#55038,1.); +#55038 = DIRECTION('',(0.,1.,0.)); +#55039 = ORIENTED_EDGE('',*,*,#54954,.T.); +#55040 = ORIENTED_EDGE('',*,*,#54201,.F.); +#55041 = PLANE('',#55042); +#55042 = AXIS2_PLACEMENT_3D('',#55043,#55044,#55045); +#55043 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55044 = DIRECTION('',(1.,0.,0.)); +#55045 = DIRECTION('',(0.,0.,1.)); +#55046 = ADVANCED_FACE('',(#55047),#55072,.T.); +#55047 = FACE_BOUND('',#55048,.T.); +#55048 = EDGE_LOOP('',(#55049,#55057,#55058,#55066)); +#55049 = ORIENTED_EDGE('',*,*,#55050,.F.); +#55050 = EDGE_CURVE('',#54371,#55051,#55053,.T.); +#55051 = VERTEX_POINT('',#55052); +#55052 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#55053 = LINE('',#55054,#55055); +#55054 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#55055 = VECTOR('',#55056,1.); +#55056 = DIRECTION('',(0.,0.,1.)); +#55057 = ORIENTED_EDGE('',*,*,#54370,.T.); +#55058 = ORIENTED_EDGE('',*,*,#55059,.T.); +#55059 = EDGE_CURVE('',#54373,#55060,#55062,.T.); +#55060 = VERTEX_POINT('',#55061); +#55061 = CARTESIAN_POINT('',(0.32,0.32,8.38)); +#55062 = LINE('',#55063,#55064); +#55063 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#55064 = VECTOR('',#55065,1.); +#55065 = DIRECTION('',(0.,0.,1.)); +#55066 = ORIENTED_EDGE('',*,*,#55067,.F.); +#55067 = EDGE_CURVE('',#55051,#55060,#55068,.T.); +#55068 = LINE('',#55069,#55070); +#55069 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#55070 = VECTOR('',#55071,1.); +#55071 = DIRECTION('',(0.,1.,0.)); +#55072 = PLANE('',#55073); +#55073 = AXIS2_PLACEMENT_3D('',#55074,#55075,#55076); +#55074 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#55075 = DIRECTION('',(1.,0.,0.)); +#55076 = DIRECTION('',(0.,0.,1.)); +#55077 = ADVANCED_FACE('',(#55078),#55096,.T.); +#55078 = FACE_BOUND('',#55079,.T.); +#55079 = EDGE_LOOP('',(#55080,#55081,#55082,#55090)); +#55080 = ORIENTED_EDGE('',*,*,#55059,.F.); +#55081 = ORIENTED_EDGE('',*,*,#54396,.T.); +#55082 = ORIENTED_EDGE('',*,*,#55083,.T.); +#55083 = EDGE_CURVE('',#54389,#55084,#55086,.T.); +#55084 = VERTEX_POINT('',#55085); +#55085 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#55086 = LINE('',#55087,#55088); +#55087 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#55088 = VECTOR('',#55089,1.); +#55089 = DIRECTION('',(0.,0.,1.)); +#55090 = ORIENTED_EDGE('',*,*,#55091,.T.); +#55091 = EDGE_CURVE('',#55084,#55060,#55092,.T.); +#55092 = LINE('',#55093,#55094); +#55093 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#55094 = VECTOR('',#55095,1.); +#55095 = DIRECTION('',(1.,0.,0.)); +#55096 = PLANE('',#55097); +#55097 = AXIS2_PLACEMENT_3D('',#55098,#55099,#55100); +#55098 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#55099 = DIRECTION('',(0.,1.,0.)); +#55100 = DIRECTION('',(0.,-0.,1.)); +#55101 = ADVANCED_FACE('',(#55102),#55120,.F.); +#55102 = FACE_BOUND('',#55103,.F.); +#55103 = EDGE_LOOP('',(#55104,#55112,#55113,#55114)); +#55104 = ORIENTED_EDGE('',*,*,#55105,.F.); +#55105 = EDGE_CURVE('',#54381,#55106,#55108,.T.); +#55106 = VERTEX_POINT('',#55107); +#55107 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#55108 = LINE('',#55109,#55110); +#55109 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55110 = VECTOR('',#55111,1.); +#55111 = DIRECTION('',(0.,0.,1.)); +#55112 = ORIENTED_EDGE('',*,*,#54388,.T.); +#55113 = ORIENTED_EDGE('',*,*,#55083,.T.); +#55114 = ORIENTED_EDGE('',*,*,#55115,.F.); +#55115 = EDGE_CURVE('',#55106,#55084,#55116,.T.); +#55116 = LINE('',#55117,#55118); +#55117 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#55118 = VECTOR('',#55119,1.); +#55119 = DIRECTION('',(0.,1.,0.)); +#55120 = PLANE('',#55121); +#55121 = AXIS2_PLACEMENT_3D('',#55122,#55123,#55124); +#55122 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55123 = DIRECTION('',(1.,0.,0.)); +#55124 = DIRECTION('',(0.,0.,1.)); +#55125 = ADVANCED_FACE('',(#55126),#55137,.F.); +#55126 = FACE_BOUND('',#55127,.F.); +#55127 = EDGE_LOOP('',(#55128,#55129,#55130,#55131)); +#55128 = ORIENTED_EDGE('',*,*,#55050,.F.); +#55129 = ORIENTED_EDGE('',*,*,#54380,.T.); +#55130 = ORIENTED_EDGE('',*,*,#55105,.T.); +#55131 = ORIENTED_EDGE('',*,*,#55132,.T.); +#55132 = EDGE_CURVE('',#55106,#55051,#55133,.T.); +#55133 = LINE('',#55134,#55135); +#55134 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#55135 = VECTOR('',#55136,1.); +#55136 = DIRECTION('',(1.,0.,0.)); +#55137 = PLANE('',#55138); +#55138 = AXIS2_PLACEMENT_3D('',#55139,#55140,#55141); +#55139 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55140 = DIRECTION('',(0.,1.,0.)); +#55141 = DIRECTION('',(0.,-0.,1.)); +#55142 = ADVANCED_FACE('',(#55143),#55168,.F.); +#55143 = FACE_BOUND('',#55144,.F.); +#55144 = EDGE_LOOP('',(#55145,#55153,#55154,#55162)); +#55145 = ORIENTED_EDGE('',*,*,#55146,.F.); +#55146 = EDGE_CURVE('',#54405,#55147,#55149,.T.); +#55147 = VERTEX_POINT('',#55148); +#55148 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#55149 = LINE('',#55150,#55151); +#55150 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#55151 = VECTOR('',#55152,1.); +#55152 = DIRECTION('',(0.,0.,1.)); +#55153 = ORIENTED_EDGE('',*,*,#54404,.T.); +#55154 = ORIENTED_EDGE('',*,*,#55155,.T.); +#55155 = EDGE_CURVE('',#54407,#55156,#55158,.T.); +#55156 = VERTEX_POINT('',#55157); +#55157 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#55158 = LINE('',#55159,#55160); +#55159 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55160 = VECTOR('',#55161,1.); +#55161 = DIRECTION('',(0.,0.,1.)); +#55162 = ORIENTED_EDGE('',*,*,#55163,.T.); +#55163 = EDGE_CURVE('',#55156,#55147,#55164,.T.); +#55164 = LINE('',#55165,#55166); +#55165 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#55166 = VECTOR('',#55167,1.); +#55167 = DIRECTION('',(1.,0.,0.)); +#55168 = PLANE('',#55169); +#55169 = AXIS2_PLACEMENT_3D('',#55170,#55171,#55172); +#55170 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55171 = DIRECTION('',(0.,1.,0.)); +#55172 = DIRECTION('',(0.,-0.,1.)); +#55173 = ADVANCED_FACE('',(#55174),#55192,.T.); +#55174 = FACE_BOUND('',#55175,.T.); +#55175 = EDGE_LOOP('',(#55176,#55177,#55178,#55186)); +#55176 = ORIENTED_EDGE('',*,*,#55146,.F.); +#55177 = ORIENTED_EDGE('',*,*,#54430,.T.); +#55178 = ORIENTED_EDGE('',*,*,#55179,.T.); +#55179 = EDGE_CURVE('',#54423,#55180,#55182,.T.); +#55180 = VERTEX_POINT('',#55181); +#55181 = CARTESIAN_POINT('',(0.32,-2.22,8.38)); +#55182 = LINE('',#55183,#55184); +#55183 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#55184 = VECTOR('',#55185,1.); +#55185 = DIRECTION('',(0.,0.,1.)); +#55186 = ORIENTED_EDGE('',*,*,#55187,.F.); +#55187 = EDGE_CURVE('',#55147,#55180,#55188,.T.); +#55188 = LINE('',#55189,#55190); +#55189 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#55190 = VECTOR('',#55191,1.); +#55191 = DIRECTION('',(0.,1.,0.)); +#55192 = PLANE('',#55193); +#55193 = AXIS2_PLACEMENT_3D('',#55194,#55195,#55196); +#55194 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#55195 = DIRECTION('',(1.,0.,0.)); +#55196 = DIRECTION('',(0.,0.,1.)); +#55197 = ADVANCED_FACE('',(#55198),#55216,.T.); +#55198 = FACE_BOUND('',#55199,.T.); +#55199 = EDGE_LOOP('',(#55200,#55201,#55202,#55210)); +#55200 = ORIENTED_EDGE('',*,*,#55179,.F.); +#55201 = ORIENTED_EDGE('',*,*,#54422,.T.); +#55202 = ORIENTED_EDGE('',*,*,#55203,.T.); +#55203 = EDGE_CURVE('',#54415,#55204,#55206,.T.); +#55204 = VERTEX_POINT('',#55205); +#55205 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#55206 = LINE('',#55207,#55208); +#55207 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#55208 = VECTOR('',#55209,1.); +#55209 = DIRECTION('',(0.,0.,1.)); +#55210 = ORIENTED_EDGE('',*,*,#55211,.T.); +#55211 = EDGE_CURVE('',#55204,#55180,#55212,.T.); +#55212 = LINE('',#55213,#55214); +#55213 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#55214 = VECTOR('',#55215,1.); +#55215 = DIRECTION('',(1.,0.,0.)); +#55216 = PLANE('',#55217); +#55217 = AXIS2_PLACEMENT_3D('',#55218,#55219,#55220); +#55218 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#55219 = DIRECTION('',(0.,1.,0.)); +#55220 = DIRECTION('',(0.,-0.,1.)); +#55221 = ADVANCED_FACE('',(#55222),#55233,.F.); +#55222 = FACE_BOUND('',#55223,.F.); +#55223 = EDGE_LOOP('',(#55224,#55225,#55226,#55227)); +#55224 = ORIENTED_EDGE('',*,*,#55155,.F.); +#55225 = ORIENTED_EDGE('',*,*,#54414,.T.); +#55226 = ORIENTED_EDGE('',*,*,#55203,.T.); +#55227 = ORIENTED_EDGE('',*,*,#55228,.F.); +#55228 = EDGE_CURVE('',#55156,#55204,#55229,.T.); +#55229 = LINE('',#55230,#55231); +#55230 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#55231 = VECTOR('',#55232,1.); +#55232 = DIRECTION('',(0.,1.,0.)); +#55233 = PLANE('',#55234); +#55234 = AXIS2_PLACEMENT_3D('',#55235,#55236,#55237); +#55235 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55236 = DIRECTION('',(1.,0.,0.)); +#55237 = DIRECTION('',(0.,0.,1.)); +#55238 = ADVANCED_FACE('',(#55239),#55264,.T.); +#55239 = FACE_BOUND('',#55240,.T.); +#55240 = EDGE_LOOP('',(#55241,#55249,#55250,#55258)); +#55241 = ORIENTED_EDGE('',*,*,#55242,.F.); +#55242 = EDGE_CURVE('',#54439,#55243,#55245,.T.); +#55243 = VERTEX_POINT('',#55244); +#55244 = CARTESIAN_POINT('',(0.32,-4.76,8.38)); +#55245 = LINE('',#55246,#55247); +#55246 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#55247 = VECTOR('',#55248,1.); +#55248 = DIRECTION('',(0.,0.,1.)); +#55249 = ORIENTED_EDGE('',*,*,#54438,.T.); +#55250 = ORIENTED_EDGE('',*,*,#55251,.T.); +#55251 = EDGE_CURVE('',#54441,#55252,#55254,.T.); +#55252 = VERTEX_POINT('',#55253); +#55253 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#55254 = LINE('',#55255,#55256); +#55255 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#55256 = VECTOR('',#55257,1.); +#55257 = DIRECTION('',(0.,0.,1.)); +#55258 = ORIENTED_EDGE('',*,*,#55259,.T.); +#55259 = EDGE_CURVE('',#55252,#55243,#55260,.T.); +#55260 = LINE('',#55261,#55262); +#55261 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#55262 = VECTOR('',#55263,1.); +#55263 = DIRECTION('',(1.,0.,0.)); +#55264 = PLANE('',#55265); +#55265 = AXIS2_PLACEMENT_3D('',#55266,#55267,#55268); +#55266 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#55267 = DIRECTION('',(0.,1.,0.)); +#55268 = DIRECTION('',(0.,-0.,1.)); +#55269 = ADVANCED_FACE('',(#55270),#55288,.F.); +#55270 = FACE_BOUND('',#55271,.F.); +#55271 = EDGE_LOOP('',(#55272,#55280,#55281,#55282)); +#55272 = ORIENTED_EDGE('',*,*,#55273,.F.); +#55273 = EDGE_CURVE('',#54457,#55274,#55276,.T.); +#55274 = VERTEX_POINT('',#55275); +#55275 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#55276 = LINE('',#55277,#55278); +#55277 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55278 = VECTOR('',#55279,1.); +#55279 = DIRECTION('',(0.,0.,1.)); +#55280 = ORIENTED_EDGE('',*,*,#54464,.T.); +#55281 = ORIENTED_EDGE('',*,*,#55251,.T.); +#55282 = ORIENTED_EDGE('',*,*,#55283,.F.); +#55283 = EDGE_CURVE('',#55274,#55252,#55284,.T.); +#55284 = LINE('',#55285,#55286); +#55285 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#55286 = VECTOR('',#55287,1.); +#55287 = DIRECTION('',(0.,1.,0.)); +#55288 = PLANE('',#55289); +#55289 = AXIS2_PLACEMENT_3D('',#55290,#55291,#55292); +#55290 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55291 = DIRECTION('',(1.,0.,0.)); +#55292 = DIRECTION('',(0.,0.,1.)); +#55293 = ADVANCED_FACE('',(#55294),#55312,.F.); +#55294 = FACE_BOUND('',#55295,.F.); +#55295 = EDGE_LOOP('',(#55296,#55304,#55305,#55306)); +#55296 = ORIENTED_EDGE('',*,*,#55297,.F.); +#55297 = EDGE_CURVE('',#54449,#55298,#55300,.T.); +#55298 = VERTEX_POINT('',#55299); +#55299 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#55300 = LINE('',#55301,#55302); +#55301 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55302 = VECTOR('',#55303,1.); +#55303 = DIRECTION('',(0.,0.,1.)); +#55304 = ORIENTED_EDGE('',*,*,#54456,.T.); +#55305 = ORIENTED_EDGE('',*,*,#55273,.T.); +#55306 = ORIENTED_EDGE('',*,*,#55307,.T.); +#55307 = EDGE_CURVE('',#55274,#55298,#55308,.T.); +#55308 = LINE('',#55309,#55310); +#55309 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#55310 = VECTOR('',#55311,1.); +#55311 = DIRECTION('',(1.,0.,0.)); +#55312 = PLANE('',#55313); +#55313 = AXIS2_PLACEMENT_3D('',#55314,#55315,#55316); +#55314 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55315 = DIRECTION('',(0.,1.,0.)); +#55316 = DIRECTION('',(0.,-0.,1.)); +#55317 = ADVANCED_FACE('',(#55318),#55329,.T.); +#55318 = FACE_BOUND('',#55319,.T.); +#55319 = EDGE_LOOP('',(#55320,#55321,#55322,#55323)); +#55320 = ORIENTED_EDGE('',*,*,#55297,.F.); +#55321 = ORIENTED_EDGE('',*,*,#54448,.T.); +#55322 = ORIENTED_EDGE('',*,*,#55242,.T.); +#55323 = ORIENTED_EDGE('',*,*,#55324,.F.); +#55324 = EDGE_CURVE('',#55298,#55243,#55325,.T.); +#55325 = LINE('',#55326,#55327); +#55326 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#55327 = VECTOR('',#55328,1.); +#55328 = DIRECTION('',(0.,1.,0.)); +#55329 = PLANE('',#55330); +#55330 = AXIS2_PLACEMENT_3D('',#55331,#55332,#55333); +#55331 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55332 = DIRECTION('',(1.,0.,0.)); +#55333 = DIRECTION('',(0.,0.,1.)); +#55334 = ADVANCED_FACE('',(#55335),#55360,.F.); +#55335 = FACE_BOUND('',#55336,.F.); +#55336 = EDGE_LOOP('',(#55337,#55345,#55346,#55354)); +#55337 = ORIENTED_EDGE('',*,*,#55338,.F.); +#55338 = EDGE_CURVE('',#54763,#55339,#55341,.T.); +#55339 = VERTEX_POINT('',#55340); +#55340 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#55341 = LINE('',#55342,#55343); +#55342 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#55343 = VECTOR('',#55344,1.); +#55344 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#55345 = ORIENTED_EDGE('',*,*,#54770,.T.); +#55346 = ORIENTED_EDGE('',*,*,#55347,.T.); +#55347 = EDGE_CURVE('',#54771,#55348,#55350,.T.); +#55348 = VERTEX_POINT('',#55349); +#55349 = CARTESIAN_POINT('',(0.16,0.16,-3.)); +#55350 = LINE('',#55351,#55352); +#55351 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + -3.106666666667)); +#55352 = VECTOR('',#55353,1.); +#55353 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#55354 = ORIENTED_EDGE('',*,*,#55355,.F.); +#55355 = EDGE_CURVE('',#55339,#55348,#55356,.T.); +#55356 = LINE('',#55357,#55358); +#55357 = CARTESIAN_POINT('',(0.16,-0.32,-3.)); +#55358 = VECTOR('',#55359,1.); +#55359 = DIRECTION('',(0.,1.,0.)); +#55360 = PLANE('',#55361); +#55361 = AXIS2_PLACEMENT_3D('',#55362,#55363,#55364); +#55362 = CARTESIAN_POINT('',(0.24,-0.32,-2.92)); +#55363 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#55364 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#55365 = ADVANCED_FACE('',(#55366),#55384,.F.); +#55366 = FACE_BOUND('',#55367,.T.); +#55367 = EDGE_LOOP('',(#55368,#55376,#55377,#55378)); +#55368 = ORIENTED_EDGE('',*,*,#55369,.F.); +#55369 = EDGE_CURVE('',#54795,#55370,#55372,.T.); +#55370 = VERTEX_POINT('',#55371); +#55371 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#55372 = LINE('',#55373,#55374); +#55373 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#55374 = VECTOR('',#55375,1.); +#55375 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#55376 = ORIENTED_EDGE('',*,*,#54794,.T.); +#55377 = ORIENTED_EDGE('',*,*,#55347,.T.); +#55378 = ORIENTED_EDGE('',*,*,#55379,.F.); +#55379 = EDGE_CURVE('',#55370,#55348,#55380,.T.); +#55380 = LINE('',#55381,#55382); +#55381 = CARTESIAN_POINT('',(-0.32,0.16,-3.)); +#55382 = VECTOR('',#55383,1.); +#55383 = DIRECTION('',(1.,0.,0.)); +#55384 = PLANE('',#55385); +#55385 = AXIS2_PLACEMENT_3D('',#55386,#55387,#55388); +#55386 = CARTESIAN_POINT('',(-0.32,0.24,-2.92)); +#55387 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#55388 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#55389 = ADVANCED_FACE('',(#55390),#55408,.T.); +#55390 = FACE_BOUND('',#55391,.T.); +#55391 = EDGE_LOOP('',(#55392,#55400,#55401,#55402)); +#55392 = ORIENTED_EDGE('',*,*,#55393,.F.); +#55393 = EDGE_CURVE('',#54818,#55394,#55396,.T.); +#55394 = VERTEX_POINT('',#55395); +#55395 = CARTESIAN_POINT('',(-0.16,-0.16,-3.)); +#55396 = LINE('',#55397,#55398); +#55397 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + -2.893333333333)); +#55398 = VECTOR('',#55399,1.); +#55399 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#55400 = ORIENTED_EDGE('',*,*,#54825,.T.); +#55401 = ORIENTED_EDGE('',*,*,#55369,.T.); +#55402 = ORIENTED_EDGE('',*,*,#55403,.F.); +#55403 = EDGE_CURVE('',#55394,#55370,#55404,.T.); +#55404 = LINE('',#55405,#55406); +#55405 = CARTESIAN_POINT('',(-0.16,-0.32,-3.)); +#55406 = VECTOR('',#55407,1.); +#55407 = DIRECTION('',(0.,1.,0.)); +#55408 = PLANE('',#55409); +#55409 = AXIS2_PLACEMENT_3D('',#55410,#55411,#55412); +#55410 = CARTESIAN_POINT('',(-0.24,-0.32,-2.92)); +#55411 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#55412 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#55413 = ADVANCED_FACE('',(#55414),#55425,.T.); +#55414 = FACE_BOUND('',#55415,.F.); +#55415 = EDGE_LOOP('',(#55416,#55417,#55418,#55419)); +#55416 = ORIENTED_EDGE('',*,*,#55393,.F.); +#55417 = ORIENTED_EDGE('',*,*,#54842,.T.); +#55418 = ORIENTED_EDGE('',*,*,#55338,.T.); +#55419 = ORIENTED_EDGE('',*,*,#55420,.F.); +#55420 = EDGE_CURVE('',#55394,#55339,#55421,.T.); +#55421 = LINE('',#55422,#55423); +#55422 = CARTESIAN_POINT('',(-0.32,-0.16,-3.)); +#55423 = VECTOR('',#55424,1.); +#55424 = DIRECTION('',(1.,0.,0.)); +#55425 = PLANE('',#55426); +#55426 = AXIS2_PLACEMENT_3D('',#55427,#55428,#55429); +#55427 = CARTESIAN_POINT('',(-0.32,-0.24,-2.92)); +#55428 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#55429 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#55430 = ADVANCED_FACE('',(#55431),#55456,.T.); +#55431 = FACE_BOUND('',#55432,.F.); +#55432 = EDGE_LOOP('',(#55433,#55441,#55442,#55450)); +#55433 = ORIENTED_EDGE('',*,*,#55434,.F.); +#55434 = EDGE_CURVE('',#54867,#55435,#55437,.T.); +#55435 = VERTEX_POINT('',#55436); +#55436 = CARTESIAN_POINT('',(-0.16,-2.7,-3.)); +#55437 = LINE('',#55438,#55439); +#55438 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + -2.893333333333)); +#55439 = VECTOR('',#55440,1.); +#55440 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#55441 = ORIENTED_EDGE('',*,*,#54866,.T.); +#55442 = ORIENTED_EDGE('',*,*,#55443,.T.); +#55443 = EDGE_CURVE('',#54859,#55444,#55446,.T.); +#55444 = VERTEX_POINT('',#55445); +#55445 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#55446 = LINE('',#55447,#55448); +#55447 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#55448 = VECTOR('',#55449,1.); +#55449 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#55450 = ORIENTED_EDGE('',*,*,#55451,.F.); +#55451 = EDGE_CURVE('',#55435,#55444,#55452,.T.); +#55452 = LINE('',#55453,#55454); +#55453 = CARTESIAN_POINT('',(-0.32,-2.7,-3.)); +#55454 = VECTOR('',#55455,1.); +#55455 = DIRECTION('',(1.,0.,0.)); +#55456 = PLANE('',#55457); +#55457 = AXIS2_PLACEMENT_3D('',#55458,#55459,#55460); +#55458 = CARTESIAN_POINT('',(-0.32,-2.78,-2.92)); +#55459 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#55460 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#55461 = ADVANCED_FACE('',(#55462),#55480,.F.); +#55462 = FACE_BOUND('',#55463,.F.); +#55463 = EDGE_LOOP('',(#55464,#55465,#55466,#55474)); +#55464 = ORIENTED_EDGE('',*,*,#55443,.F.); +#55465 = ORIENTED_EDGE('',*,*,#54890,.T.); +#55466 = ORIENTED_EDGE('',*,*,#55467,.T.); +#55467 = EDGE_CURVE('',#54891,#55468,#55470,.T.); +#55468 = VERTEX_POINT('',#55469); +#55469 = CARTESIAN_POINT('',(0.16,-2.38,-3.)); +#55470 = LINE('',#55471,#55472); +#55471 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + -3.106666666667)); +#55472 = VECTOR('',#55473,1.); +#55473 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#55474 = ORIENTED_EDGE('',*,*,#55475,.F.); +#55475 = EDGE_CURVE('',#55444,#55468,#55476,.T.); +#55476 = LINE('',#55477,#55478); +#55477 = CARTESIAN_POINT('',(0.16,-2.86,-3.)); +#55478 = VECTOR('',#55479,1.); +#55479 = DIRECTION('',(0.,1.,0.)); +#55480 = PLANE('',#55481); +#55481 = AXIS2_PLACEMENT_3D('',#55482,#55483,#55484); +#55482 = CARTESIAN_POINT('',(0.24,-2.86,-2.92)); +#55483 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#55484 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#55485 = ADVANCED_FACE('',(#55486),#55504,.F.); +#55486 = FACE_BOUND('',#55487,.T.); +#55487 = EDGE_LOOP('',(#55488,#55496,#55497,#55498)); +#55488 = ORIENTED_EDGE('',*,*,#55489,.F.); +#55489 = EDGE_CURVE('',#54915,#55490,#55492,.T.); +#55490 = VERTEX_POINT('',#55491); +#55491 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#55492 = LINE('',#55493,#55494); +#55493 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#55494 = VECTOR('',#55495,1.); +#55495 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#55496 = ORIENTED_EDGE('',*,*,#54914,.T.); +#55497 = ORIENTED_EDGE('',*,*,#55467,.T.); +#55498 = ORIENTED_EDGE('',*,*,#55499,.F.); +#55499 = EDGE_CURVE('',#55490,#55468,#55500,.T.); +#55500 = LINE('',#55501,#55502); +#55501 = CARTESIAN_POINT('',(-0.32,-2.38,-3.)); +#55502 = VECTOR('',#55503,1.); +#55503 = DIRECTION('',(1.,0.,0.)); +#55504 = PLANE('',#55505); +#55505 = AXIS2_PLACEMENT_3D('',#55506,#55507,#55508); +#55506 = CARTESIAN_POINT('',(-0.32,-2.3,-2.92)); +#55507 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#55508 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#55509 = ADVANCED_FACE('',(#55510),#55521,.T.); +#55510 = FACE_BOUND('',#55511,.T.); +#55511 = EDGE_LOOP('',(#55512,#55513,#55514,#55515)); +#55512 = ORIENTED_EDGE('',*,*,#55434,.F.); +#55513 = ORIENTED_EDGE('',*,*,#54938,.T.); +#55514 = ORIENTED_EDGE('',*,*,#55489,.T.); +#55515 = ORIENTED_EDGE('',*,*,#55516,.F.); +#55516 = EDGE_CURVE('',#55435,#55490,#55517,.T.); +#55517 = LINE('',#55518,#55519); +#55518 = CARTESIAN_POINT('',(-0.16,-2.86,-3.)); +#55519 = VECTOR('',#55520,1.); +#55520 = DIRECTION('',(0.,1.,0.)); +#55521 = PLANE('',#55522); +#55522 = AXIS2_PLACEMENT_3D('',#55523,#55524,#55525); +#55523 = CARTESIAN_POINT('',(-0.24,-2.86,-2.92)); +#55524 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#55525 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#55526 = ADVANCED_FACE('',(#55527),#55552,.F.); +#55527 = FACE_BOUND('',#55528,.T.); +#55528 = EDGE_LOOP('',(#55529,#55537,#55538,#55546)); +#55529 = ORIENTED_EDGE('',*,*,#55530,.F.); +#55530 = EDGE_CURVE('',#54963,#55531,#55533,.T.); +#55531 = VERTEX_POINT('',#55532); +#55532 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#55533 = LINE('',#55534,#55535); +#55534 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#55535 = VECTOR('',#55536,1.); +#55536 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#55537 = ORIENTED_EDGE('',*,*,#54962,.T.); +#55538 = ORIENTED_EDGE('',*,*,#55539,.T.); +#55539 = EDGE_CURVE('',#54955,#55540,#55542,.T.); +#55540 = VERTEX_POINT('',#55541); +#55541 = CARTESIAN_POINT('',(0.16,-4.92,-3.)); +#55542 = LINE('',#55543,#55544); +#55543 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + -3.106666666667)); +#55544 = VECTOR('',#55545,1.); +#55545 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#55546 = ORIENTED_EDGE('',*,*,#55547,.F.); +#55547 = EDGE_CURVE('',#55531,#55540,#55548,.T.); +#55548 = LINE('',#55549,#55550); +#55549 = CARTESIAN_POINT('',(-0.32,-4.92,-3.)); +#55550 = VECTOR('',#55551,1.); +#55551 = DIRECTION('',(1.,0.,0.)); +#55552 = PLANE('',#55553); +#55553 = AXIS2_PLACEMENT_3D('',#55554,#55555,#55556); +#55554 = CARTESIAN_POINT('',(-0.32,-4.84,-2.92)); +#55555 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#55556 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#55557 = ADVANCED_FACE('',(#55558),#55576,.T.); +#55558 = FACE_BOUND('',#55559,.T.); +#55559 = EDGE_LOOP('',(#55560,#55568,#55569,#55570)); +#55560 = ORIENTED_EDGE('',*,*,#55561,.F.); +#55561 = EDGE_CURVE('',#54986,#55562,#55564,.T.); +#55562 = VERTEX_POINT('',#55563); +#55563 = CARTESIAN_POINT('',(-0.16,-5.24,-3.)); +#55564 = LINE('',#55565,#55566); +#55565 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + -2.893333333333)); +#55566 = VECTOR('',#55567,1.); +#55567 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#55568 = ORIENTED_EDGE('',*,*,#54993,.T.); +#55569 = ORIENTED_EDGE('',*,*,#55530,.T.); +#55570 = ORIENTED_EDGE('',*,*,#55571,.F.); +#55571 = EDGE_CURVE('',#55562,#55531,#55572,.T.); +#55572 = LINE('',#55573,#55574); +#55573 = CARTESIAN_POINT('',(-0.16,-5.4,-3.)); +#55574 = VECTOR('',#55575,1.); +#55575 = DIRECTION('',(0.,1.,0.)); +#55576 = PLANE('',#55577); +#55577 = AXIS2_PLACEMENT_3D('',#55578,#55579,#55580); +#55578 = CARTESIAN_POINT('',(-0.24,-5.4,-2.92)); +#55579 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#55580 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#55581 = ADVANCED_FACE('',(#55582),#55600,.T.); +#55582 = FACE_BOUND('',#55583,.F.); +#55583 = EDGE_LOOP('',(#55584,#55585,#55586,#55594)); +#55584 = ORIENTED_EDGE('',*,*,#55561,.F.); +#55585 = ORIENTED_EDGE('',*,*,#55017,.T.); +#55586 = ORIENTED_EDGE('',*,*,#55587,.T.); +#55587 = EDGE_CURVE('',#55010,#55588,#55590,.T.); +#55588 = VERTEX_POINT('',#55589); +#55589 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#55590 = LINE('',#55591,#55592); +#55591 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#55592 = VECTOR('',#55593,1.); +#55593 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#55594 = ORIENTED_EDGE('',*,*,#55595,.F.); +#55595 = EDGE_CURVE('',#55562,#55588,#55596,.T.); +#55596 = LINE('',#55597,#55598); +#55597 = CARTESIAN_POINT('',(-0.32,-5.24,-3.)); +#55598 = VECTOR('',#55599,1.); +#55599 = DIRECTION('',(1.,0.,0.)); +#55600 = PLANE('',#55601); +#55601 = AXIS2_PLACEMENT_3D('',#55602,#55603,#55604); +#55602 = CARTESIAN_POINT('',(-0.32,-5.32,-2.92)); +#55603 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#55604 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#55605 = ADVANCED_FACE('',(#55606),#55617,.F.); +#55606 = FACE_BOUND('',#55607,.F.); +#55607 = EDGE_LOOP('',(#55608,#55609,#55610,#55611)); +#55608 = ORIENTED_EDGE('',*,*,#55587,.F.); +#55609 = ORIENTED_EDGE('',*,*,#55034,.T.); +#55610 = ORIENTED_EDGE('',*,*,#55539,.T.); +#55611 = ORIENTED_EDGE('',*,*,#55612,.F.); +#55612 = EDGE_CURVE('',#55588,#55540,#55613,.T.); +#55613 = LINE('',#55614,#55615); +#55614 = CARTESIAN_POINT('',(0.16,-5.4,-3.)); +#55615 = VECTOR('',#55616,1.); +#55616 = DIRECTION('',(0.,1.,0.)); +#55617 = PLANE('',#55618); +#55618 = AXIS2_PLACEMENT_3D('',#55619,#55620,#55621); +#55619 = CARTESIAN_POINT('',(0.24,-5.4,-2.92)); +#55620 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#55621 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#55622 = ADVANCED_FACE('',(#55623),#55648,.T.); +#55623 = FACE_BOUND('',#55624,.T.); +#55624 = EDGE_LOOP('',(#55625,#55633,#55634,#55642)); +#55625 = ORIENTED_EDGE('',*,*,#55626,.F.); +#55626 = EDGE_CURVE('',#55051,#55627,#55629,.T.); +#55627 = VERTEX_POINT('',#55628); +#55628 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#55629 = LINE('',#55630,#55631); +#55630 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#55631 = VECTOR('',#55632,1.); +#55632 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#55633 = ORIENTED_EDGE('',*,*,#55067,.T.); +#55634 = ORIENTED_EDGE('',*,*,#55635,.T.); +#55635 = EDGE_CURVE('',#55060,#55636,#55638,.T.); +#55636 = VERTEX_POINT('',#55637); +#55637 = CARTESIAN_POINT('',(0.16,0.16,8.54)); +#55638 = LINE('',#55639,#55640); +#55639 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + 8.646666666667)); +#55640 = VECTOR('',#55641,1.); +#55641 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#55642 = ORIENTED_EDGE('',*,*,#55643,.F.); +#55643 = EDGE_CURVE('',#55627,#55636,#55644,.T.); +#55644 = LINE('',#55645,#55646); +#55645 = CARTESIAN_POINT('',(0.16,-0.32,8.54)); +#55646 = VECTOR('',#55647,1.); +#55647 = DIRECTION('',(0.,1.,0.)); +#55648 = PLANE('',#55649); +#55649 = AXIS2_PLACEMENT_3D('',#55650,#55651,#55652); +#55650 = CARTESIAN_POINT('',(0.24,-0.32,8.46)); +#55651 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#55652 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#55653 = ADVANCED_FACE('',(#55654),#55672,.T.); +#55654 = FACE_BOUND('',#55655,.F.); +#55655 = EDGE_LOOP('',(#55656,#55664,#55665,#55666)); +#55656 = ORIENTED_EDGE('',*,*,#55657,.F.); +#55657 = EDGE_CURVE('',#55084,#55658,#55660,.T.); +#55658 = VERTEX_POINT('',#55659); +#55659 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#55660 = LINE('',#55661,#55662); +#55661 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#55662 = VECTOR('',#55663,1.); +#55663 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#55664 = ORIENTED_EDGE('',*,*,#55091,.T.); +#55665 = ORIENTED_EDGE('',*,*,#55635,.T.); +#55666 = ORIENTED_EDGE('',*,*,#55667,.F.); +#55667 = EDGE_CURVE('',#55658,#55636,#55668,.T.); +#55668 = LINE('',#55669,#55670); +#55669 = CARTESIAN_POINT('',(-0.32,0.16,8.54)); +#55670 = VECTOR('',#55671,1.); +#55671 = DIRECTION('',(1.,0.,0.)); +#55672 = PLANE('',#55673); +#55673 = AXIS2_PLACEMENT_3D('',#55674,#55675,#55676); +#55674 = CARTESIAN_POINT('',(-0.32,0.24,8.46)); +#55675 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#55676 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#55677 = ADVANCED_FACE('',(#55678),#55696,.F.); +#55678 = FACE_BOUND('',#55679,.F.); +#55679 = EDGE_LOOP('',(#55680,#55688,#55689,#55690)); +#55680 = ORIENTED_EDGE('',*,*,#55681,.F.); +#55681 = EDGE_CURVE('',#55106,#55682,#55684,.T.); +#55682 = VERTEX_POINT('',#55683); +#55683 = CARTESIAN_POINT('',(-0.16,-0.16,8.54)); +#55684 = LINE('',#55685,#55686); +#55685 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + 8.433333333333)); +#55686 = VECTOR('',#55687,1.); +#55687 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#55688 = ORIENTED_EDGE('',*,*,#55115,.T.); +#55689 = ORIENTED_EDGE('',*,*,#55657,.T.); +#55690 = ORIENTED_EDGE('',*,*,#55691,.F.); +#55691 = EDGE_CURVE('',#55682,#55658,#55692,.T.); +#55692 = LINE('',#55693,#55694); +#55693 = CARTESIAN_POINT('',(-0.16,-0.32,8.54)); +#55694 = VECTOR('',#55695,1.); +#55695 = DIRECTION('',(0.,1.,0.)); +#55696 = PLANE('',#55697); +#55697 = AXIS2_PLACEMENT_3D('',#55698,#55699,#55700); +#55698 = CARTESIAN_POINT('',(-0.24,-0.32,8.46)); +#55699 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#55700 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#55701 = ADVANCED_FACE('',(#55702),#55713,.F.); +#55702 = FACE_BOUND('',#55703,.T.); +#55703 = EDGE_LOOP('',(#55704,#55705,#55706,#55707)); +#55704 = ORIENTED_EDGE('',*,*,#55681,.F.); +#55705 = ORIENTED_EDGE('',*,*,#55132,.T.); +#55706 = ORIENTED_EDGE('',*,*,#55626,.T.); +#55707 = ORIENTED_EDGE('',*,*,#55708,.F.); +#55708 = EDGE_CURVE('',#55682,#55627,#55709,.T.); +#55709 = LINE('',#55710,#55711); +#55710 = CARTESIAN_POINT('',(-0.32,-0.16,8.54)); +#55711 = VECTOR('',#55712,1.); +#55712 = DIRECTION('',(1.,0.,0.)); +#55713 = PLANE('',#55714); +#55714 = AXIS2_PLACEMENT_3D('',#55715,#55716,#55717); +#55715 = CARTESIAN_POINT('',(-0.32,-0.24,8.46)); +#55716 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#55717 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#55718 = ADVANCED_FACE('',(#55719),#55744,.F.); +#55719 = FACE_BOUND('',#55720,.T.); +#55720 = EDGE_LOOP('',(#55721,#55729,#55730,#55738)); +#55721 = ORIENTED_EDGE('',*,*,#55722,.F.); +#55722 = EDGE_CURVE('',#55156,#55723,#55725,.T.); +#55723 = VERTEX_POINT('',#55724); +#55724 = CARTESIAN_POINT('',(-0.16,-2.7,8.54)); +#55725 = LINE('',#55726,#55727); +#55726 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + 8.433333333333)); +#55727 = VECTOR('',#55728,1.); +#55728 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#55729 = ORIENTED_EDGE('',*,*,#55163,.T.); +#55730 = ORIENTED_EDGE('',*,*,#55731,.T.); +#55731 = EDGE_CURVE('',#55147,#55732,#55734,.T.); +#55732 = VERTEX_POINT('',#55733); +#55733 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#55734 = LINE('',#55735,#55736); +#55735 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#55736 = VECTOR('',#55737,1.); +#55737 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#55738 = ORIENTED_EDGE('',*,*,#55739,.F.); +#55739 = EDGE_CURVE('',#55723,#55732,#55740,.T.); +#55740 = LINE('',#55741,#55742); +#55741 = CARTESIAN_POINT('',(-0.32,-2.7,8.54)); +#55742 = VECTOR('',#55743,1.); +#55743 = DIRECTION('',(1.,0.,0.)); +#55744 = PLANE('',#55745); +#55745 = AXIS2_PLACEMENT_3D('',#55746,#55747,#55748); +#55746 = CARTESIAN_POINT('',(-0.32,-2.78,8.46)); +#55747 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#55748 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#55749 = ADVANCED_FACE('',(#55750),#55768,.T.); +#55750 = FACE_BOUND('',#55751,.T.); +#55751 = EDGE_LOOP('',(#55752,#55753,#55754,#55762)); +#55752 = ORIENTED_EDGE('',*,*,#55731,.F.); +#55753 = ORIENTED_EDGE('',*,*,#55187,.T.); +#55754 = ORIENTED_EDGE('',*,*,#55755,.T.); +#55755 = EDGE_CURVE('',#55180,#55756,#55758,.T.); +#55756 = VERTEX_POINT('',#55757); +#55757 = CARTESIAN_POINT('',(0.16,-2.38,8.54)); +#55758 = LINE('',#55759,#55760); +#55759 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + 8.646666666667)); +#55760 = VECTOR('',#55761,1.); +#55761 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#55762 = ORIENTED_EDGE('',*,*,#55763,.F.); +#55763 = EDGE_CURVE('',#55732,#55756,#55764,.T.); +#55764 = LINE('',#55765,#55766); +#55765 = CARTESIAN_POINT('',(0.16,-2.86,8.54)); +#55766 = VECTOR('',#55767,1.); +#55767 = DIRECTION('',(0.,1.,0.)); +#55768 = PLANE('',#55769); +#55769 = AXIS2_PLACEMENT_3D('',#55770,#55771,#55772); +#55770 = CARTESIAN_POINT('',(0.24,-2.86,8.46)); +#55771 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#55772 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#55773 = ADVANCED_FACE('',(#55774),#55792,.T.); +#55774 = FACE_BOUND('',#55775,.F.); +#55775 = EDGE_LOOP('',(#55776,#55784,#55785,#55786)); +#55776 = ORIENTED_EDGE('',*,*,#55777,.F.); +#55777 = EDGE_CURVE('',#55204,#55778,#55780,.T.); +#55778 = VERTEX_POINT('',#55779); +#55779 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#55780 = LINE('',#55781,#55782); +#55781 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#55782 = VECTOR('',#55783,1.); +#55783 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#55784 = ORIENTED_EDGE('',*,*,#55211,.T.); +#55785 = ORIENTED_EDGE('',*,*,#55755,.T.); +#55786 = ORIENTED_EDGE('',*,*,#55787,.F.); +#55787 = EDGE_CURVE('',#55778,#55756,#55788,.T.); +#55788 = LINE('',#55789,#55790); +#55789 = CARTESIAN_POINT('',(-0.32,-2.38,8.54)); +#55790 = VECTOR('',#55791,1.); +#55791 = DIRECTION('',(1.,0.,0.)); +#55792 = PLANE('',#55793); +#55793 = AXIS2_PLACEMENT_3D('',#55794,#55795,#55796); +#55794 = CARTESIAN_POINT('',(-0.32,-2.3,8.46)); +#55795 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#55796 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#55797 = ADVANCED_FACE('',(#55798),#55809,.F.); +#55798 = FACE_BOUND('',#55799,.F.); +#55799 = EDGE_LOOP('',(#55800,#55801,#55802,#55803)); +#55800 = ORIENTED_EDGE('',*,*,#55722,.F.); +#55801 = ORIENTED_EDGE('',*,*,#55228,.T.); +#55802 = ORIENTED_EDGE('',*,*,#55777,.T.); +#55803 = ORIENTED_EDGE('',*,*,#55804,.F.); +#55804 = EDGE_CURVE('',#55723,#55778,#55805,.T.); +#55805 = LINE('',#55806,#55807); +#55806 = CARTESIAN_POINT('',(-0.16,-2.86,8.54)); +#55807 = VECTOR('',#55808,1.); +#55808 = DIRECTION('',(0.,1.,0.)); +#55809 = PLANE('',#55810); +#55810 = AXIS2_PLACEMENT_3D('',#55811,#55812,#55813); +#55811 = CARTESIAN_POINT('',(-0.24,-2.86,8.46)); +#55812 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#55813 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#55814 = ADVANCED_FACE('',(#55815),#55840,.T.); +#55815 = FACE_BOUND('',#55816,.F.); +#55816 = EDGE_LOOP('',(#55817,#55825,#55826,#55834)); +#55817 = ORIENTED_EDGE('',*,*,#55818,.F.); +#55818 = EDGE_CURVE('',#55252,#55819,#55821,.T.); +#55819 = VERTEX_POINT('',#55820); +#55820 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#55821 = LINE('',#55822,#55823); +#55822 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#55823 = VECTOR('',#55824,1.); +#55824 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#55825 = ORIENTED_EDGE('',*,*,#55259,.T.); +#55826 = ORIENTED_EDGE('',*,*,#55827,.T.); +#55827 = EDGE_CURVE('',#55243,#55828,#55830,.T.); +#55828 = VERTEX_POINT('',#55829); +#55829 = CARTESIAN_POINT('',(0.16,-4.92,8.54)); +#55830 = LINE('',#55831,#55832); +#55831 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + 8.646666666667)); +#55832 = VECTOR('',#55833,1.); +#55833 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#55834 = ORIENTED_EDGE('',*,*,#55835,.F.); +#55835 = EDGE_CURVE('',#55819,#55828,#55836,.T.); +#55836 = LINE('',#55837,#55838); +#55837 = CARTESIAN_POINT('',(-0.32,-4.92,8.54)); +#55838 = VECTOR('',#55839,1.); +#55839 = DIRECTION('',(1.,0.,0.)); +#55840 = PLANE('',#55841); +#55841 = AXIS2_PLACEMENT_3D('',#55842,#55843,#55844); +#55842 = CARTESIAN_POINT('',(-0.32,-4.84,8.46)); +#55843 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#55844 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#55845 = ADVANCED_FACE('',(#55846),#55864,.F.); +#55846 = FACE_BOUND('',#55847,.F.); +#55847 = EDGE_LOOP('',(#55848,#55856,#55857,#55858)); +#55848 = ORIENTED_EDGE('',*,*,#55849,.F.); +#55849 = EDGE_CURVE('',#55274,#55850,#55852,.T.); +#55850 = VERTEX_POINT('',#55851); +#55851 = CARTESIAN_POINT('',(-0.16,-5.24,8.54)); +#55852 = LINE('',#55853,#55854); +#55853 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + 8.433333333333)); +#55854 = VECTOR('',#55855,1.); +#55855 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#55856 = ORIENTED_EDGE('',*,*,#55283,.T.); +#55857 = ORIENTED_EDGE('',*,*,#55818,.T.); +#55858 = ORIENTED_EDGE('',*,*,#55859,.F.); +#55859 = EDGE_CURVE('',#55850,#55819,#55860,.T.); +#55860 = LINE('',#55861,#55862); +#55861 = CARTESIAN_POINT('',(-0.16,-5.4,8.54)); +#55862 = VECTOR('',#55863,1.); +#55863 = DIRECTION('',(0.,1.,0.)); +#55864 = PLANE('',#55865); +#55865 = AXIS2_PLACEMENT_3D('',#55866,#55867,#55868); +#55866 = CARTESIAN_POINT('',(-0.24,-5.4,8.46)); +#55867 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#55868 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#55869 = ADVANCED_FACE('',(#55870),#55888,.F.); +#55870 = FACE_BOUND('',#55871,.T.); +#55871 = EDGE_LOOP('',(#55872,#55873,#55874,#55882)); +#55872 = ORIENTED_EDGE('',*,*,#55849,.F.); +#55873 = ORIENTED_EDGE('',*,*,#55307,.T.); +#55874 = ORIENTED_EDGE('',*,*,#55875,.T.); +#55875 = EDGE_CURVE('',#55298,#55876,#55878,.T.); +#55876 = VERTEX_POINT('',#55877); +#55877 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#55878 = LINE('',#55879,#55880); +#55879 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#55880 = VECTOR('',#55881,1.); +#55881 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#55882 = ORIENTED_EDGE('',*,*,#55883,.F.); +#55883 = EDGE_CURVE('',#55850,#55876,#55884,.T.); +#55884 = LINE('',#55885,#55886); +#55885 = CARTESIAN_POINT('',(-0.32,-5.24,8.54)); +#55886 = VECTOR('',#55887,1.); +#55887 = DIRECTION('',(1.,0.,0.)); +#55888 = PLANE('',#55889); +#55889 = AXIS2_PLACEMENT_3D('',#55890,#55891,#55892); +#55890 = CARTESIAN_POINT('',(-0.32,-5.32,8.46)); +#55891 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#55892 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#55893 = ADVANCED_FACE('',(#55894),#55905,.T.); +#55894 = FACE_BOUND('',#55895,.T.); +#55895 = EDGE_LOOP('',(#55896,#55897,#55898,#55899)); +#55896 = ORIENTED_EDGE('',*,*,#55875,.F.); +#55897 = ORIENTED_EDGE('',*,*,#55324,.T.); +#55898 = ORIENTED_EDGE('',*,*,#55827,.T.); +#55899 = ORIENTED_EDGE('',*,*,#55900,.F.); +#55900 = EDGE_CURVE('',#55876,#55828,#55901,.T.); +#55901 = LINE('',#55902,#55903); +#55902 = CARTESIAN_POINT('',(0.16,-5.4,8.54)); +#55903 = VECTOR('',#55904,1.); +#55904 = DIRECTION('',(0.,1.,0.)); +#55905 = PLANE('',#55906); +#55906 = AXIS2_PLACEMENT_3D('',#55907,#55908,#55909); +#55907 = CARTESIAN_POINT('',(0.24,-5.4,8.46)); +#55908 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#55909 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#55910 = ADVANCED_FACE('',(#55911),#55917,.F.); +#55911 = FACE_BOUND('',#55912,.F.); +#55912 = EDGE_LOOP('',(#55913,#55914,#55915,#55916)); +#55913 = ORIENTED_EDGE('',*,*,#55379,.F.); +#55914 = ORIENTED_EDGE('',*,*,#55403,.F.); +#55915 = ORIENTED_EDGE('',*,*,#55420,.T.); +#55916 = ORIENTED_EDGE('',*,*,#55355,.T.); +#55917 = PLANE('',#55918); +#55918 = AXIS2_PLACEMENT_3D('',#55919,#55920,#55921); +#55919 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55920 = DIRECTION('',(0.,0.,1.)); +#55921 = DIRECTION('',(1.,0.,-0.)); +#55922 = ADVANCED_FACE('',(#55923),#55929,.F.); +#55923 = FACE_BOUND('',#55924,.F.); +#55924 = EDGE_LOOP('',(#55925,#55926,#55927,#55928)); +#55925 = ORIENTED_EDGE('',*,*,#55499,.F.); +#55926 = ORIENTED_EDGE('',*,*,#55516,.F.); +#55927 = ORIENTED_EDGE('',*,*,#55451,.T.); +#55928 = ORIENTED_EDGE('',*,*,#55475,.T.); +#55929 = PLANE('',#55930); +#55930 = AXIS2_PLACEMENT_3D('',#55931,#55932,#55933); +#55931 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55932 = DIRECTION('',(0.,0.,1.)); +#55933 = DIRECTION('',(1.,0.,-0.)); +#55934 = ADVANCED_FACE('',(#55935),#55941,.F.); +#55935 = FACE_BOUND('',#55936,.F.); +#55936 = EDGE_LOOP('',(#55937,#55938,#55939,#55940)); +#55937 = ORIENTED_EDGE('',*,*,#55547,.F.); +#55938 = ORIENTED_EDGE('',*,*,#55571,.F.); +#55939 = ORIENTED_EDGE('',*,*,#55595,.T.); +#55940 = ORIENTED_EDGE('',*,*,#55612,.T.); +#55941 = PLANE('',#55942); +#55942 = AXIS2_PLACEMENT_3D('',#55943,#55944,#55945); +#55943 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55944 = DIRECTION('',(0.,0.,1.)); +#55945 = DIRECTION('',(1.,0.,-0.)); +#55946 = ADVANCED_FACE('',(#55947),#55953,.T.); +#55947 = FACE_BOUND('',#55948,.T.); +#55948 = EDGE_LOOP('',(#55949,#55950,#55951,#55952)); +#55949 = ORIENTED_EDGE('',*,*,#55708,.T.); +#55950 = ORIENTED_EDGE('',*,*,#55643,.T.); +#55951 = ORIENTED_EDGE('',*,*,#55667,.F.); +#55952 = ORIENTED_EDGE('',*,*,#55691,.F.); +#55953 = PLANE('',#55954); +#55954 = AXIS2_PLACEMENT_3D('',#55955,#55956,#55957); +#55955 = CARTESIAN_POINT('',(-0.32,-0.32,8.54)); +#55956 = DIRECTION('',(0.,0.,1.)); +#55957 = DIRECTION('',(1.,0.,-0.)); +#55958 = ADVANCED_FACE('',(#55959),#55965,.T.); +#55959 = FACE_BOUND('',#55960,.T.); +#55960 = EDGE_LOOP('',(#55961,#55962,#55963,#55964)); +#55961 = ORIENTED_EDGE('',*,*,#55739,.T.); +#55962 = ORIENTED_EDGE('',*,*,#55763,.T.); +#55963 = ORIENTED_EDGE('',*,*,#55787,.F.); +#55964 = ORIENTED_EDGE('',*,*,#55804,.F.); +#55965 = PLANE('',#55966); +#55966 = AXIS2_PLACEMENT_3D('',#55967,#55968,#55969); +#55967 = CARTESIAN_POINT('',(-0.32,-2.86,8.54)); +#55968 = DIRECTION('',(0.,0.,1.)); +#55969 = DIRECTION('',(1.,0.,-0.)); +#55970 = ADVANCED_FACE('',(#55971),#55977,.T.); +#55971 = FACE_BOUND('',#55972,.T.); +#55972 = EDGE_LOOP('',(#55973,#55974,#55975,#55976)); +#55973 = ORIENTED_EDGE('',*,*,#55883,.T.); +#55974 = ORIENTED_EDGE('',*,*,#55900,.T.); +#55975 = ORIENTED_EDGE('',*,*,#55835,.F.); +#55976 = ORIENTED_EDGE('',*,*,#55859,.F.); +#55977 = PLANE('',#55978); +#55978 = AXIS2_PLACEMENT_3D('',#55979,#55980,#55981); +#55979 = CARTESIAN_POINT('',(-0.32,-5.4,8.54)); +#55980 = DIRECTION('',(0.,0.,1.)); +#55981 = DIRECTION('',(1.,0.,-0.)); +#55982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#55986)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#55983,#55984,#55985)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#55983 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#55984 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#55985 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#55986 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#55983, + 'distance_accuracy_value','confusion accuracy'); +#55987 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#55988,#55990); +#55988 = ( REPRESENTATION_RELATIONSHIP('','',#53875,#53852) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#55989) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#55989 = ITEM_DEFINED_TRANSFORMATION('','',#11,#53853); +#55990 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #55991); +#55991 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('57','=>[0:1:1:33]','',#53847, + #53870,$); +#55992 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#53872)); +#55993 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#55994,#55996); +#55994 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#55995) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#55995 = ITEM_DEFINED_TRANSFORMATION('','',#11,#183); +#55996 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #55997); +#55997 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('59','C35','',#5,#42695,$); +#55998 = SHAPE_DEFINITION_REPRESENTATION(#55999,#56005); +#55999 = PRODUCT_DEFINITION_SHAPE('','',#56000); +#56000 = PRODUCT_DEFINITION('design','',#56001,#56004); +#56001 = PRODUCT_DEFINITION_FORMATION('','',#56002); +#56002 = PRODUCT('SOT-563','SOT-563','',(#56003)); +#56003 = PRODUCT_CONTEXT('',#2,'mechanical'); +#56004 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#56005 = SHAPE_REPRESENTATION('',(#11,#56006),#56010); +#56006 = AXIS2_PLACEMENT_3D('',#56007,#56008,#56009); +#56007 = CARTESIAN_POINT('',(0.,0.,0.)); +#56008 = DIRECTION('',(0.,0.,1.)); +#56009 = DIRECTION('',(1.,0.,-0.)); +#56010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#56014)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#56011,#56012,#56013)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#56011 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#56012 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#56013 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#56014 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#56011, + 'distance_accuracy_value','confusion accuracy'); +#56015 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#56016,#56018); +#56016 = ( REPRESENTATION_RELATIONSHIP('','',#56005,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#56017) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#56017 = ITEM_DEFINED_TRANSFORMATION('','',#11,#187); +#56018 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #56019); +#56019 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('61','U4','',#5,#56000,$); +#56020 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56002)); +#56021 = SHAPE_DEFINITION_REPRESENTATION(#56022,#56028); +#56022 = PRODUCT_DEFINITION_SHAPE('','',#56023); +#56023 = PRODUCT_DEFINITION('design','',#56024,#56027); +#56024 = PRODUCT_DEFINITION_FORMATION('','',#56025); +#56025 = PRODUCT('SOT_563','SOT_563','',(#56026)); +#56026 = PRODUCT_CONTEXT('',#2,'mechanical'); +#56027 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#56028 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#56029),#58658); +#56029 = MANIFOLD_SOLID_BREP('',#56030); +#56030 = CLOSED_SHELL('',(#56031,#56071,#56102,#56232,#56256,#56379, + #56506,#56523,#56546,#56668,#56796,#56813,#56844,#57071,#57102, + #57329,#57360,#57391,#57618,#57746,#57777,#57800,#57922,#57967, + #57999,#58049,#58081,#58098,#58130,#58147,#58179,#58211,#58228, + #58260,#58292,#58309,#58341,#58358,#58390,#58422,#58439,#58456, + #58473,#58496,#58513,#58525,#58542,#58559,#58576,#58588,#58600, + #58612,#58624,#58649)); +#56031 = ADVANCED_FACE('',(#56032),#56066,.F.); +#56032 = FACE_BOUND('',#56033,.F.); +#56033 = EDGE_LOOP('',(#56034,#56044,#56052,#56060)); +#56034 = ORIENTED_EDGE('',*,*,#56035,.F.); +#56035 = EDGE_CURVE('',#56036,#56038,#56040,.T.); +#56036 = VERTEX_POINT('',#56037); +#56037 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56038 = VERTEX_POINT('',#56039); +#56039 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56040 = LINE('',#56041,#56042); +#56041 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56042 = VECTOR('',#56043,1.); +#56043 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56044 = ORIENTED_EDGE('',*,*,#56045,.T.); +#56045 = EDGE_CURVE('',#56036,#56046,#56048,.T.); +#56046 = VERTEX_POINT('',#56047); +#56047 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56048 = LINE('',#56049,#56050); +#56049 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56050 = VECTOR('',#56051,1.); +#56051 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56052 = ORIENTED_EDGE('',*,*,#56053,.T.); +#56053 = EDGE_CURVE('',#56046,#56054,#56056,.T.); +#56054 = VERTEX_POINT('',#56055); +#56055 = CARTESIAN_POINT('',(0.8,0.61,0.)); +#56056 = LINE('',#56057,#56058); +#56057 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56058 = VECTOR('',#56059,1.); +#56059 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56060 = ORIENTED_EDGE('',*,*,#56061,.F.); +#56061 = EDGE_CURVE('',#56038,#56054,#56062,.T.); +#56062 = LINE('',#56063,#56064); +#56063 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56064 = VECTOR('',#56065,1.); +#56065 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56066 = PLANE('',#56067); +#56067 = AXIS2_PLACEMENT_3D('',#56068,#56069,#56070); +#56068 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56069 = DIRECTION('',(0.,0.,1.)); +#56070 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#56071 = ADVANCED_FACE('',(#56072),#56097,.F.); +#56072 = FACE_BOUND('',#56073,.F.); +#56073 = EDGE_LOOP('',(#56074,#56082,#56083,#56091)); +#56074 = ORIENTED_EDGE('',*,*,#56075,.F.); +#56075 = EDGE_CURVE('',#56036,#56076,#56078,.T.); +#56076 = VERTEX_POINT('',#56077); +#56077 = CARTESIAN_POINT('',(0.595807377657,0.39,3.E-02)); +#56078 = LINE('',#56079,#56080); +#56079 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56080 = VECTOR('',#56081,1.); +#56081 = DIRECTION('',(0.,0.,1.)); +#56082 = ORIENTED_EDGE('',*,*,#56035,.T.); +#56083 = ORIENTED_EDGE('',*,*,#56084,.T.); +#56084 = EDGE_CURVE('',#56038,#56085,#56087,.T.); +#56085 = VERTEX_POINT('',#56086); +#56086 = CARTESIAN_POINT('',(0.595807377657,0.61,3.E-02)); +#56087 = LINE('',#56088,#56089); +#56088 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56089 = VECTOR('',#56090,1.); +#56090 = DIRECTION('',(0.,0.,1.)); +#56091 = ORIENTED_EDGE('',*,*,#56092,.F.); +#56092 = EDGE_CURVE('',#56076,#56085,#56093,.T.); +#56093 = LINE('',#56094,#56095); +#56094 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56095 = VECTOR('',#56096,1.); +#56096 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56097 = PLANE('',#56098); +#56098 = AXIS2_PLACEMENT_3D('',#56099,#56100,#56101); +#56099 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56100 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56101 = DIRECTION('',(0.,-0.,1.)); +#56102 = ADVANCED_FACE('',(#56103),#56227,.T.); +#56103 = FACE_BOUND('',#56104,.T.); +#56104 = EDGE_LOOP('',(#56105,#56113,#56114,#56115,#56221)); +#56105 = ORIENTED_EDGE('',*,*,#56106,.F.); +#56106 = EDGE_CURVE('',#56054,#56107,#56109,.T.); +#56107 = VERTEX_POINT('',#56108); +#56108 = CARTESIAN_POINT('',(0.8,0.61,0.11)); +#56109 = LINE('',#56110,#56111); +#56110 = CARTESIAN_POINT('',(0.8,0.61,0.)); +#56111 = VECTOR('',#56112,1.); +#56112 = DIRECTION('',(0.,0.,1.)); +#56113 = ORIENTED_EDGE('',*,*,#56061,.F.); +#56114 = ORIENTED_EDGE('',*,*,#56084,.T.); +#56115 = ORIENTED_EDGE('',*,*,#56116,.T.); +#56116 = EDGE_CURVE('',#56085,#56117,#56119,.T.); +#56117 = VERTEX_POINT('',#56118); +#56118 = CARTESIAN_POINT('',(0.6,0.61,0.11)); +#56119 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56120,#56121,#56122,#56123, + #56124,#56125,#56126,#56127,#56128,#56129,#56130,#56131,#56132, + #56133,#56134,#56135,#56136,#56137,#56138,#56139,#56140,#56141, + #56142,#56143,#56144,#56145,#56146,#56147,#56148,#56149,#56150, + #56151,#56152,#56153,#56154,#56155,#56156,#56157,#56158,#56159, + #56160,#56161,#56162,#56163,#56164,#56165,#56166,#56167,#56168, + #56169,#56170,#56171,#56172,#56173,#56174,#56175,#56176,#56177, + #56178,#56179,#56180,#56181,#56182,#56183,#56184,#56185,#56186, + #56187,#56188,#56189,#56190,#56191,#56192,#56193,#56194,#56195, + #56196,#56197,#56198,#56199,#56200,#56201,#56202,#56203,#56204, + #56205,#56206,#56207,#56208,#56209,#56210,#56211,#56212,#56213, + #56214,#56215,#56216,#56217,#56218,#56219,#56220),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527397E-02,6.000171535369E-02,9.000249028111E-02, + 0.120003210098,0.150003874847,0.180004484568,0.210005039305, + 0.240005539099,0.270005983992,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.42000738639,0.450007502748, + 0.480007564495,0.510007571674,0.540007524325,0.570007422489, + 0.600007266209,0.630007055525,0.660006790478,0.69000647111, + 0.720006097462,0.750005669576,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#56120 = CARTESIAN_POINT('',(0.595807377657,0.61,3.E-02)); +#56121 = CARTESIAN_POINT('',(0.595838822296,0.61,3.059999944783E-02)); +#56122 = CARTESIAN_POINT('',(0.595870266954,0.61,3.119999926388E-02)); +#56123 = CARTESIAN_POINT('',(0.595901711631,0.61,3.179999944803E-02)); +#56124 = CARTESIAN_POINT('',(0.595964600966,0.61,3.299999944838E-02)); +#56125 = CARTESIAN_POINT('',(0.595996045624,0.61,3.359999926458E-02)); +#56126 = CARTESIAN_POINT('',(0.596027490301,0.61,3.419999944858E-02)); +#56127 = CARTESIAN_POINT('',(0.596090379637,0.61,3.539999944893E-02)); +#56128 = CARTESIAN_POINT('',(0.596121824295,0.61,3.599999926526E-02)); +#56129 = CARTESIAN_POINT('',(0.596153268972,0.61,3.659999944913E-02)); +#56130 = CARTESIAN_POINT('',(0.596216158307,0.61,3.779999944948E-02)); +#56131 = CARTESIAN_POINT('',(0.596247602965,0.61,3.839999926595E-02)); +#56132 = CARTESIAN_POINT('',(0.596279047642,0.61,3.899999944968E-02)); +#56133 = CARTESIAN_POINT('',(0.596341936977,0.61,4.019999945003E-02)); +#56134 = CARTESIAN_POINT('',(0.596373381635,0.61,4.079999926664E-02)); +#56135 = CARTESIAN_POINT('',(0.596404826312,0.61,4.139999945023E-02)); +#56136 = CARTESIAN_POINT('',(0.596467715648,0.61,4.259999945058E-02)); +#56137 = CARTESIAN_POINT('',(0.596499160305,0.61,4.319999926733E-02)); +#56138 = CARTESIAN_POINT('',(0.596530604983,0.61,4.379999945078E-02)); +#56139 = CARTESIAN_POINT('',(0.596593494318,0.61,4.499999945112E-02)); +#56140 = CARTESIAN_POINT('',(0.596624938976,0.61,4.559999926801E-02)); +#56141 = CARTESIAN_POINT('',(0.596656383653,0.61,4.619999945133E-02)); +#56142 = CARTESIAN_POINT('',(0.596719272988,0.61,4.739999945167E-02)); +#56143 = CARTESIAN_POINT('',(0.596750717646,0.61,4.79999992687E-02)); +#56144 = CARTESIAN_POINT('',(0.596782162323,0.61,4.859999945188E-02)); +#56145 = CARTESIAN_POINT('',(0.596845051658,0.61,4.979999945222E-02)); +#56146 = CARTESIAN_POINT('',(0.596876496316,0.61,5.039999926939E-02)); +#56147 = CARTESIAN_POINT('',(0.596907940994,0.61,5.099999945242E-02)); +#56148 = CARTESIAN_POINT('',(0.596970830329,0.61,5.219999945277E-02)); +#56149 = CARTESIAN_POINT('',(0.597002274987,0.61,5.279999927007E-02)); +#56150 = CARTESIAN_POINT('',(0.597033719664,0.61,5.339999945297E-02)); +#56151 = CARTESIAN_POINT('',(0.597096608999,0.61,5.459999945331E-02)); +#56152 = CARTESIAN_POINT('',(0.597128053657,0.61,5.519999927076E-02)); +#56153 = CARTESIAN_POINT('',(0.597159498334,0.61,5.579999945351E-02)); +#56154 = CARTESIAN_POINT('',(0.597222387669,0.61,5.699999945386E-02)); +#56155 = CARTESIAN_POINT('',(0.597253832327,0.61,5.759999927144E-02)); +#56156 = CARTESIAN_POINT('',(0.597285277005,0.61,5.819999945406E-02)); +#56157 = CARTESIAN_POINT('',(0.59734816634,0.61,5.93999994544E-02)); +#56158 = CARTESIAN_POINT('',(0.597379610998,0.61,5.999999927213E-02)); +#56159 = CARTESIAN_POINT('',(0.597411055675,0.61,6.059999945461E-02)); +#56160 = CARTESIAN_POINT('',(0.59747394501,0.61,6.179999945495E-02)); +#56161 = CARTESIAN_POINT('',(0.597505389668,0.61,6.239999927281E-02)); +#56162 = CARTESIAN_POINT('',(0.597536834345,0.61,6.299999945515E-02)); +#56163 = CARTESIAN_POINT('',(0.59759972368,0.61,6.419999945549E-02)); +#56164 = CARTESIAN_POINT('',(0.597631168338,0.61,6.479999927349E-02)); +#56165 = CARTESIAN_POINT('',(0.597662613015,0.61,6.539999945569E-02)); +#56166 = CARTESIAN_POINT('',(0.597725502351,0.61,6.659999945604E-02)); +#56167 = CARTESIAN_POINT('',(0.597756947009,0.61,6.719999927417E-02)); +#56168 = CARTESIAN_POINT('',(0.597788391686,0.61,6.779999945624E-02)); +#56169 = CARTESIAN_POINT('',(0.597851281021,0.61,6.899999945658E-02)); +#56170 = CARTESIAN_POINT('',(0.597882725679,0.61,6.959999927485E-02)); +#56171 = CARTESIAN_POINT('',(0.597914170356,0.61,7.019999945678E-02)); +#56172 = CARTESIAN_POINT('',(0.597977059691,0.61,7.139999945712E-02)); +#56173 = CARTESIAN_POINT('',(0.598008504349,0.61,7.199999927553E-02)); +#56174 = CARTESIAN_POINT('',(0.598039949026,0.61,7.259999945732E-02)); +#56175 = CARTESIAN_POINT('',(0.598102838362,0.61,7.379999945766E-02)); +#56176 = CARTESIAN_POINT('',(0.59813428302,0.61,7.439999927621E-02)); +#56177 = CARTESIAN_POINT('',(0.598165727697,0.61,7.499999945787E-02)); +#56178 = CARTESIAN_POINT('',(0.598228617032,0.61,7.619999945821E-02)); +#56179 = CARTESIAN_POINT('',(0.59826006169,0.61,7.679999927689E-02)); +#56180 = CARTESIAN_POINT('',(0.598291506367,0.61,7.739999945841E-02)); +#56181 = CARTESIAN_POINT('',(0.598354395702,0.61,7.859999945875E-02)); +#56182 = CARTESIAN_POINT('',(0.59838584036,0.61,7.919999927757E-02)); +#56183 = CARTESIAN_POINT('',(0.598417285037,0.61,7.979999945895E-02)); +#56184 = CARTESIAN_POINT('',(0.598480174372,0.61,8.099999945929E-02)); +#56185 = CARTESIAN_POINT('',(0.598511619031,0.61,8.159999927825E-02)); +#56186 = CARTESIAN_POINT('',(0.598543063708,0.61,8.219999945949E-02)); +#56187 = CARTESIAN_POINT('',(0.598605953043,0.61,8.339999945983E-02)); +#56188 = CARTESIAN_POINT('',(0.598637397701,0.61,8.399999927893E-02)); +#56189 = CARTESIAN_POINT('',(0.598668842378,0.61,8.459999946003E-02)); +#56190 = CARTESIAN_POINT('',(0.598731731713,0.61,8.579999946037E-02)); +#56191 = CARTESIAN_POINT('',(0.598763176371,0.61,8.63999992796E-02)); +#56192 = CARTESIAN_POINT('',(0.598794621048,0.61,8.699999946057E-02)); +#56193 = CARTESIAN_POINT('',(0.598857510383,0.61,8.819999946091E-02)); +#56194 = CARTESIAN_POINT('',(0.598888955041,0.61,8.879999928028E-02)); +#56195 = CARTESIAN_POINT('',(0.598920399719,0.61,8.939999946111E-02)); +#56196 = CARTESIAN_POINT('',(0.598983289054,0.61,9.059999946145E-02)); +#56197 = CARTESIAN_POINT('',(0.599014733712,0.61,9.119999928096E-02)); +#56198 = CARTESIAN_POINT('',(0.599046178389,0.61,9.179999946165E-02)); +#56199 = CARTESIAN_POINT('',(0.599109067724,0.61,9.299999946199E-02)); +#56200 = CARTESIAN_POINT('',(0.599140512382,0.61,9.359999928163E-02)); +#56201 = CARTESIAN_POINT('',(0.599171957059,0.61,9.419999946219E-02)); +#56202 = CARTESIAN_POINT('',(0.599234846394,0.61,9.539999946253E-02)); +#56203 = CARTESIAN_POINT('',(0.599266291052,0.61,9.599999928231E-02)); +#56204 = CARTESIAN_POINT('',(0.599297735729,0.61,9.659999946273E-02)); +#56205 = CARTESIAN_POINT('',(0.599360625065,0.61,9.779999946306E-02)); +#56206 = CARTESIAN_POINT('',(0.599392069723,0.61,9.839999928298E-02)); +#56207 = CARTESIAN_POINT('',(0.5994235144,0.61,9.899999946326E-02)); +#56208 = CARTESIAN_POINT('',(0.599486403735,0.61,0.100199999464)); +#56209 = CARTESIAN_POINT('',(0.599517848393,0.61,0.100799999284)); +#56210 = CARTESIAN_POINT('',(0.59954929307,0.61,0.101399999464)); +#56211 = CARTESIAN_POINT('',(0.599612182405,0.61,0.102599999464)); +#56212 = CARTESIAN_POINT('',(0.599643627063,0.61,0.103199999284)); +#56213 = CARTESIAN_POINT('',(0.59967507174,0.61,0.103799999464)); +#56214 = CARTESIAN_POINT('',(0.599737961076,0.61,0.104999999465)); +#56215 = CARTESIAN_POINT('',(0.599769405734,0.61,0.105599999285)); +#56216 = CARTESIAN_POINT('',(0.599800850411,0.61,0.106199999465)); +#56217 = CARTESIAN_POINT('',(0.59987422128,0.61,0.107599999045)); +#56218 = CARTESIAN_POINT('',(0.599916147486,0.61,0.108399998725)); +#56219 = CARTESIAN_POINT('',(0.599958073726,0.61,0.109199999043)); +#56220 = CARTESIAN_POINT('',(0.6,0.61,0.11)); +#56221 = ORIENTED_EDGE('',*,*,#56222,.T.); +#56222 = EDGE_CURVE('',#56117,#56107,#56223,.T.); +#56223 = LINE('',#56224,#56225); +#56224 = CARTESIAN_POINT('',(0.595807377657,0.61,0.11)); +#56225 = VECTOR('',#56226,1.); +#56226 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56227 = PLANE('',#56228); +#56228 = AXIS2_PLACEMENT_3D('',#56229,#56230,#56231); +#56229 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56230 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56231 = DIRECTION('',(0.,0.,1.)); +#56232 = ADVANCED_FACE('',(#56233),#56251,.T.); +#56233 = FACE_BOUND('',#56234,.T.); +#56234 = EDGE_LOOP('',(#56235,#56243,#56244,#56245)); +#56235 = ORIENTED_EDGE('',*,*,#56236,.F.); +#56236 = EDGE_CURVE('',#56046,#56237,#56239,.T.); +#56237 = VERTEX_POINT('',#56238); +#56238 = CARTESIAN_POINT('',(0.8,0.39,0.11)); +#56239 = LINE('',#56240,#56241); +#56240 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56241 = VECTOR('',#56242,1.); +#56242 = DIRECTION('',(0.,0.,1.)); +#56243 = ORIENTED_EDGE('',*,*,#56053,.T.); +#56244 = ORIENTED_EDGE('',*,*,#56106,.T.); +#56245 = ORIENTED_EDGE('',*,*,#56246,.F.); +#56246 = EDGE_CURVE('',#56237,#56107,#56247,.T.); +#56247 = LINE('',#56248,#56249); +#56248 = CARTESIAN_POINT('',(0.8,0.39,0.11)); +#56249 = VECTOR('',#56250,1.); +#56250 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56251 = PLANE('',#56252); +#56252 = AXIS2_PLACEMENT_3D('',#56253,#56254,#56255); +#56253 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56254 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56255 = DIRECTION('',(0.,-0.,1.)); +#56256 = ADVANCED_FACE('',(#56257),#56374,.F.); +#56257 = FACE_BOUND('',#56258,.F.); +#56258 = EDGE_LOOP('',(#56259,#56260,#56261,#56262,#56368)); +#56259 = ORIENTED_EDGE('',*,*,#56236,.F.); +#56260 = ORIENTED_EDGE('',*,*,#56045,.F.); +#56261 = ORIENTED_EDGE('',*,*,#56075,.T.); +#56262 = ORIENTED_EDGE('',*,*,#56263,.T.); +#56263 = EDGE_CURVE('',#56076,#56264,#56266,.T.); +#56264 = VERTEX_POINT('',#56265); +#56265 = CARTESIAN_POINT('',(0.6,0.39,0.11)); +#56266 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56267,#56268,#56269,#56270, + #56271,#56272,#56273,#56274,#56275,#56276,#56277,#56278,#56279, + #56280,#56281,#56282,#56283,#56284,#56285,#56286,#56287,#56288, + #56289,#56290,#56291,#56292,#56293,#56294,#56295,#56296,#56297, + #56298,#56299,#56300,#56301,#56302,#56303,#56304,#56305,#56306, + #56307,#56308,#56309,#56310,#56311,#56312,#56313,#56314,#56315, + #56316,#56317,#56318,#56319,#56320,#56321,#56322,#56323,#56324, + #56325,#56326,#56327,#56328,#56329,#56330,#56331,#56332,#56333, + #56334,#56335,#56336,#56337,#56338,#56339,#56340,#56341,#56342, + #56343,#56344,#56345,#56346,#56347,#56348,#56349,#56350,#56351, + #56352,#56353,#56354,#56355,#56356,#56357,#56358,#56359,#56360, + #56361,#56362,#56363,#56364,#56365,#56366,#56367),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.00003729932E-02,6.000072272729E-02,9.000104922036E-02, + 0.12000135249,0.150001632556,0.180001889434,0.210002123143, + 0.240002333701,0.270002521127,0.300002685437,0.33000282665, + 0.360002944784,0.390003039857,0.420003111886,0.45000316089, + 0.480003186886,0.510003189893,0.540003169927,0.570003127007, + 0.600003061151,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.810001959429, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.960000488289,1.),.UNSPECIFIED.); +#56267 = CARTESIAN_POINT('',(0.595807377657,0.39,3.E-02)); +#56268 = CARTESIAN_POINT('',(0.595838822313,0.39,3.059999976731E-02)); +#56269 = CARTESIAN_POINT('',(0.595870266976,0.39,3.119999968979E-02)); +#56270 = CARTESIAN_POINT('',(0.595901711648,0.39,3.179999976739E-02)); +#56271 = CARTESIAN_POINT('',(0.595964600983,0.39,3.299999976754E-02)); +#56272 = CARTESIAN_POINT('',(0.595996045647,0.39,3.359999969008E-02)); +#56273 = CARTESIAN_POINT('',(0.596027490318,0.39,3.419999976763E-02)); +#56274 = CARTESIAN_POINT('',(0.596090379653,0.39,3.539999976777E-02)); +#56275 = CARTESIAN_POINT('',(0.596121824317,0.39,3.599999969038E-02)); +#56276 = CARTESIAN_POINT('',(0.596153268988,0.39,3.659999976786E-02)); +#56277 = CARTESIAN_POINT('',(0.596216158324,0.39,3.779999976801E-02)); +#56278 = CARTESIAN_POINT('',(0.596247602987,0.39,3.839999969067E-02)); +#56279 = CARTESIAN_POINT('',(0.596279047659,0.39,3.899999976809E-02)); +#56280 = CARTESIAN_POINT('',(0.596341936994,0.39,4.019999976824E-02)); +#56281 = CARTESIAN_POINT('',(0.596373381657,0.39,4.079999969097E-02)); +#56282 = CARTESIAN_POINT('',(0.596404826329,0.39,4.139999976833E-02)); +#56283 = CARTESIAN_POINT('',(0.596467715664,0.39,4.259999976848E-02)); +#56284 = CARTESIAN_POINT('',(0.596499160328,0.39,4.319999969126E-02)); +#56285 = CARTESIAN_POINT('',(0.596530604999,0.39,4.379999976856E-02)); +#56286 = CARTESIAN_POINT('',(0.596593494334,0.39,4.499999976871E-02)); +#56287 = CARTESIAN_POINT('',(0.596624938998,0.39,4.559999969155E-02)); +#56288 = CARTESIAN_POINT('',(0.59665638367,0.39,4.61999997688E-02)); +#56289 = CARTESIAN_POINT('',(0.596719273005,0.39,4.739999976894E-02)); +#56290 = CARTESIAN_POINT('',(0.596750717668,0.39,4.799999969185E-02)); +#56291 = CARTESIAN_POINT('',(0.59678216234,0.39,4.859999976903E-02)); +#56292 = CARTESIAN_POINT('',(0.596845051675,0.39,4.979999976918E-02)); +#56293 = CARTESIAN_POINT('',(0.596876496339,0.39,5.039999969214E-02)); +#56294 = CARTESIAN_POINT('',(0.59690794101,0.39,5.099999976926E-02)); +#56295 = CARTESIAN_POINT('',(0.596970830345,0.39,5.219999976941E-02)); +#56296 = CARTESIAN_POINT('',(0.597002275009,0.39,5.279999969243E-02)); +#56297 = CARTESIAN_POINT('',(0.59703371968,0.39,5.339999976949E-02)); +#56298 = CARTESIAN_POINT('',(0.597096609016,0.39,5.459999976964E-02)); +#56299 = CARTESIAN_POINT('',(0.597128053679,0.39,5.519999969272E-02)); +#56300 = CARTESIAN_POINT('',(0.597159498351,0.39,5.579999976973E-02)); +#56301 = CARTESIAN_POINT('',(0.597222387686,0.39,5.699999976987E-02)); +#56302 = CARTESIAN_POINT('',(0.597253832349,0.39,5.759999969302E-02)); +#56303 = CARTESIAN_POINT('',(0.597285277021,0.39,5.819999976996E-02)); +#56304 = CARTESIAN_POINT('',(0.597348166356,0.39,5.939999977011E-02)); +#56305 = CARTESIAN_POINT('',(0.59737961102,0.39,5.999999969331E-02)); +#56306 = CARTESIAN_POINT('',(0.597411055691,0.39,6.059999977019E-02)); +#56307 = CARTESIAN_POINT('',(0.597473945027,0.39,6.179999977034E-02)); +#56308 = CARTESIAN_POINT('',(0.59750538969,0.39,6.23999996936E-02)); +#56309 = CARTESIAN_POINT('',(0.597536834362,0.39,6.299999977042E-02)); +#56310 = CARTESIAN_POINT('',(0.597599723697,0.39,6.419999977057E-02)); +#56311 = CARTESIAN_POINT('',(0.59763116836,0.39,6.479999969389E-02)); +#56312 = CARTESIAN_POINT('',(0.597662613032,0.39,6.539999977066E-02)); +#56313 = CARTESIAN_POINT('',(0.597725502367,0.39,6.65999997708E-02)); +#56314 = CARTESIAN_POINT('',(0.597756947031,0.39,6.719999969418E-02)); +#56315 = CARTESIAN_POINT('',(0.597788391702,0.39,6.779999977089E-02)); +#56316 = CARTESIAN_POINT('',(0.597851281037,0.39,6.899999977103E-02)); +#56317 = CARTESIAN_POINT('',(0.597882725701,0.39,6.959999969447E-02)); +#56318 = CARTESIAN_POINT('',(0.597914170373,0.39,7.019999977112E-02)); +#56319 = CARTESIAN_POINT('',(0.597977059708,0.39,7.139999977126E-02)); +#56320 = CARTESIAN_POINT('',(0.598008504371,0.39,7.199999969476E-02)); +#56321 = CARTESIAN_POINT('',(0.598039949043,0.39,7.259999977135E-02)); +#56322 = CARTESIAN_POINT('',(0.598102838378,0.39,7.379999977149E-02)); +#56323 = CARTESIAN_POINT('',(0.598134283042,0.39,7.439999969505E-02)); +#56324 = CARTESIAN_POINT('',(0.598165727713,0.39,7.499999977158E-02)); +#56325 = CARTESIAN_POINT('',(0.598228617048,0.39,7.619999977173E-02)); +#56326 = CARTESIAN_POINT('',(0.598260061712,0.39,7.679999969534E-02)); +#56327 = CARTESIAN_POINT('',(0.598291506383,0.39,7.739999977181E-02)); +#56328 = CARTESIAN_POINT('',(0.598354395719,0.39,7.859999977196E-02)); +#56329 = CARTESIAN_POINT('',(0.598385840382,0.39,7.919999969563E-02)); +#56330 = CARTESIAN_POINT('',(0.598417285054,0.39,7.979999977204E-02)); +#56331 = CARTESIAN_POINT('',(0.598480174389,0.39,8.099999977219E-02)); +#56332 = CARTESIAN_POINT('',(0.598511619052,0.39,8.159999969592E-02)); +#56333 = CARTESIAN_POINT('',(0.598543063724,0.39,8.219999977227E-02)); +#56334 = CARTESIAN_POINT('',(0.598605953059,0.39,8.339999977242E-02)); +#56335 = CARTESIAN_POINT('',(0.598637397723,0.39,8.399999969621E-02)); +#56336 = CARTESIAN_POINT('',(0.598668842394,0.39,8.45999997725E-02)); +#56337 = CARTESIAN_POINT('',(0.598731731729,0.39,8.579999977265E-02)); +#56338 = CARTESIAN_POINT('',(0.598763176393,0.39,8.63999996965E-02)); +#56339 = CARTESIAN_POINT('',(0.598794621065,0.39,8.699999977273E-02)); +#56340 = CARTESIAN_POINT('',(0.5988575104,0.39,8.819999977288E-02)); +#56341 = CARTESIAN_POINT('',(0.598888955063,0.39,8.879999969679E-02)); +#56342 = CARTESIAN_POINT('',(0.598920399735,0.39,8.939999977296E-02)); +#56343 = CARTESIAN_POINT('',(0.59898328907,0.39,9.059999977311E-02)); +#56344 = CARTESIAN_POINT('',(0.599014733734,0.39,9.119999969708E-02)); +#56345 = CARTESIAN_POINT('',(0.599046178405,0.39,9.179999977319E-02)); +#56346 = CARTESIAN_POINT('',(0.59910906774,0.39,9.299999977334E-02)); +#56347 = CARTESIAN_POINT('',(0.599140512404,0.39,9.359999969737E-02)); +#56348 = CARTESIAN_POINT('',(0.599171957075,0.39,9.419999977342E-02)); +#56349 = CARTESIAN_POINT('',(0.599234846411,0.39,9.539999977356E-02)); +#56350 = CARTESIAN_POINT('',(0.599266291074,0.39,9.599999969765E-02)); +#56351 = CARTESIAN_POINT('',(0.599297735746,0.39,9.659999977365E-02)); +#56352 = CARTESIAN_POINT('',(0.599360625081,0.39,9.779999977379E-02)); +#56353 = CARTESIAN_POINT('',(0.599392069744,0.39,9.839999969794E-02)); +#56354 = CARTESIAN_POINT('',(0.599423514416,0.39,9.899999977388E-02)); +#56355 = CARTESIAN_POINT('',(0.599486403751,0.39,0.100199999774)); +#56356 = CARTESIAN_POINT('',(0.599517848415,0.39,0.100799999698)); +#56357 = CARTESIAN_POINT('',(0.599549293086,0.39,0.101399999774)); +#56358 = CARTESIAN_POINT('',(0.599612182421,0.39,0.102599999774)); +#56359 = CARTESIAN_POINT('',(0.599643627085,0.39,0.103199999699)); +#56360 = CARTESIAN_POINT('',(0.599675071757,0.39,0.103799999774)); +#56361 = CARTESIAN_POINT('',(0.599737961092,0.39,0.104999999774)); +#56362 = CARTESIAN_POINT('',(0.599769405755,0.39,0.105599999699)); +#56363 = CARTESIAN_POINT('',(0.599800850427,0.39,0.106199999775)); +#56364 = CARTESIAN_POINT('',(0.599874221309,0.39,0.107599999598)); +#56365 = CARTESIAN_POINT('',(0.599916147525,0.39,0.108399999463)); +#56366 = CARTESIAN_POINT('',(0.599958073755,0.39,0.109199999597)); +#56367 = CARTESIAN_POINT('',(0.6,0.39,0.11)); +#56368 = ORIENTED_EDGE('',*,*,#56369,.T.); +#56369 = EDGE_CURVE('',#56264,#56237,#56370,.T.); +#56370 = LINE('',#56371,#56372); +#56371 = CARTESIAN_POINT('',(0.595807377657,0.39,0.11)); +#56372 = VECTOR('',#56373,1.); +#56373 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56374 = PLANE('',#56375); +#56375 = AXIS2_PLACEMENT_3D('',#56376,#56377,#56378); +#56376 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56377 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56378 = DIRECTION('',(0.,0.,1.)); +#56379 = ADVANCED_FACE('',(#56380),#56501,.T.); +#56380 = FACE_BOUND('',#56381,.T.); +#56381 = EDGE_LOOP('',(#56382,#56392,#56400,#56406,#56407,#56415,#56423, + #56431,#56439,#56447,#56455,#56463,#56471,#56479,#56487,#56495)); +#56382 = ORIENTED_EDGE('',*,*,#56383,.F.); +#56383 = EDGE_CURVE('',#56384,#56386,#56388,.T.); +#56384 = VERTEX_POINT('',#56385); +#56385 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56386 = VERTEX_POINT('',#56387); +#56387 = CARTESIAN_POINT('',(-0.595807377657,0.61,3.E-02)); +#56388 = LINE('',#56389,#56390); +#56389 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56390 = VECTOR('',#56391,1.); +#56391 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56392 = ORIENTED_EDGE('',*,*,#56393,.F.); +#56393 = EDGE_CURVE('',#56394,#56384,#56396,.T.); +#56394 = VERTEX_POINT('',#56395); +#56395 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56396 = LINE('',#56397,#56398); +#56397 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56398 = VECTOR('',#56399,1.); +#56399 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#56400 = ORIENTED_EDGE('',*,*,#56401,.F.); +#56401 = EDGE_CURVE('',#56085,#56394,#56402,.T.); +#56402 = LINE('',#56403,#56404); +#56403 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56404 = VECTOR('',#56405,1.); +#56405 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56406 = ORIENTED_EDGE('',*,*,#56092,.F.); +#56407 = ORIENTED_EDGE('',*,*,#56408,.F.); +#56408 = EDGE_CURVE('',#56409,#56076,#56411,.T.); +#56409 = VERTEX_POINT('',#56410); +#56410 = CARTESIAN_POINT('',(0.595807377657,0.11,3.E-02)); +#56411 = LINE('',#56412,#56413); +#56412 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56413 = VECTOR('',#56414,1.); +#56414 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56415 = ORIENTED_EDGE('',*,*,#56416,.F.); +#56416 = EDGE_CURVE('',#56417,#56409,#56419,.T.); +#56417 = VERTEX_POINT('',#56418); +#56418 = CARTESIAN_POINT('',(0.595807377657,-0.11,3.E-02)); +#56419 = LINE('',#56420,#56421); +#56420 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56421 = VECTOR('',#56422,1.); +#56422 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56423 = ORIENTED_EDGE('',*,*,#56424,.F.); +#56424 = EDGE_CURVE('',#56425,#56417,#56427,.T.); +#56425 = VERTEX_POINT('',#56426); +#56426 = CARTESIAN_POINT('',(0.595807377657,-0.39,3.E-02)); +#56427 = LINE('',#56428,#56429); +#56428 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56429 = VECTOR('',#56430,1.); +#56430 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56431 = ORIENTED_EDGE('',*,*,#56432,.F.); +#56432 = EDGE_CURVE('',#56433,#56425,#56435,.T.); +#56433 = VERTEX_POINT('',#56434); +#56434 = CARTESIAN_POINT('',(0.595807377657,-0.61,3.E-02)); +#56435 = LINE('',#56436,#56437); +#56436 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56437 = VECTOR('',#56438,1.); +#56438 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56439 = ORIENTED_EDGE('',*,*,#56440,.F.); +#56440 = EDGE_CURVE('',#56441,#56433,#56443,.T.); +#56441 = VERTEX_POINT('',#56442); +#56442 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56443 = LINE('',#56444,#56445); +#56444 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56445 = VECTOR('',#56446,1.); +#56446 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56447 = ORIENTED_EDGE('',*,*,#56448,.F.); +#56448 = EDGE_CURVE('',#56449,#56441,#56451,.T.); +#56449 = VERTEX_POINT('',#56450); +#56450 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#56451 = LINE('',#56452,#56453); +#56452 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#56453 = VECTOR('',#56454,1.); +#56454 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#56455 = ORIENTED_EDGE('',*,*,#56456,.F.); +#56456 = EDGE_CURVE('',#56457,#56449,#56459,.T.); +#56457 = VERTEX_POINT('',#56458); +#56458 = CARTESIAN_POINT('',(-0.595807377657,-0.61,3.E-02)); +#56459 = LINE('',#56460,#56461); +#56460 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56461 = VECTOR('',#56462,1.); +#56462 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56463 = ORIENTED_EDGE('',*,*,#56464,.F.); +#56464 = EDGE_CURVE('',#56465,#56457,#56467,.T.); +#56465 = VERTEX_POINT('',#56466); +#56466 = CARTESIAN_POINT('',(-0.595807377657,-0.39,3.E-02)); +#56467 = LINE('',#56468,#56469); +#56468 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56469 = VECTOR('',#56470,1.); +#56470 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56471 = ORIENTED_EDGE('',*,*,#56472,.F.); +#56472 = EDGE_CURVE('',#56473,#56465,#56475,.T.); +#56473 = VERTEX_POINT('',#56474); +#56474 = CARTESIAN_POINT('',(-0.595807377657,-0.11,3.E-02)); +#56475 = LINE('',#56476,#56477); +#56476 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56477 = VECTOR('',#56478,1.); +#56478 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56479 = ORIENTED_EDGE('',*,*,#56480,.F.); +#56480 = EDGE_CURVE('',#56481,#56473,#56483,.T.); +#56481 = VERTEX_POINT('',#56482); +#56482 = CARTESIAN_POINT('',(-0.595807377657,0.11,3.E-02)); +#56483 = LINE('',#56484,#56485); +#56484 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56485 = VECTOR('',#56486,1.); +#56486 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56487 = ORIENTED_EDGE('',*,*,#56488,.F.); +#56488 = EDGE_CURVE('',#56489,#56481,#56491,.T.); +#56489 = VERTEX_POINT('',#56490); +#56490 = CARTESIAN_POINT('',(-0.595807377657,0.39,3.E-02)); +#56491 = LINE('',#56492,#56493); +#56492 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56493 = VECTOR('',#56494,1.); +#56494 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56495 = ORIENTED_EDGE('',*,*,#56496,.F.); +#56496 = EDGE_CURVE('',#56386,#56489,#56497,.T.); +#56497 = LINE('',#56498,#56499); +#56498 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56499 = VECTOR('',#56500,1.); +#56500 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56501 = PLANE('',#56502); +#56502 = AXIS2_PLACEMENT_3D('',#56503,#56504,#56505); +#56503 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56504 = DIRECTION('',(0.,0.,-1.)); +#56505 = DIRECTION('',(0.599325006491,-0.800505800475,0.)); +#56506 = ADVANCED_FACE('',(#56507),#56518,.T.); +#56507 = FACE_BOUND('',#56508,.T.); +#56508 = EDGE_LOOP('',(#56509,#56515,#56516,#56517)); +#56509 = ORIENTED_EDGE('',*,*,#56510,.F.); +#56510 = EDGE_CURVE('',#56264,#56117,#56511,.T.); +#56511 = LINE('',#56512,#56513); +#56512 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56513 = VECTOR('',#56514,1.); +#56514 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56515 = ORIENTED_EDGE('',*,*,#56369,.T.); +#56516 = ORIENTED_EDGE('',*,*,#56246,.T.); +#56517 = ORIENTED_EDGE('',*,*,#56222,.F.); +#56518 = PLANE('',#56519); +#56519 = AXIS2_PLACEMENT_3D('',#56520,#56521,#56522); +#56520 = CARTESIAN_POINT('',(0.595807377657,0.39,0.11)); +#56521 = DIRECTION('',(0.,0.,1.)); +#56522 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#56523 = ADVANCED_FACE('',(#56524),#56541,.T.); +#56524 = FACE_BOUND('',#56525,.T.); +#56525 = EDGE_LOOP('',(#56526,#56527,#56528,#56535)); +#56526 = ORIENTED_EDGE('',*,*,#56116,.F.); +#56527 = ORIENTED_EDGE('',*,*,#56401,.T.); +#56528 = ORIENTED_EDGE('',*,*,#56529,.T.); +#56529 = EDGE_CURVE('',#56394,#56530,#56532,.T.); +#56530 = VERTEX_POINT('',#56531); +#56531 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56532 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56533,#56534),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56533 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56534 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56535 = ORIENTED_EDGE('',*,*,#56536,.F.); +#56536 = EDGE_CURVE('',#56117,#56530,#56537,.T.); +#56537 = LINE('',#56538,#56539); +#56538 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56539 = VECTOR('',#56540,1.); +#56540 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56541 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56542,#56543) + ,(#56544,#56545 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56542 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56543 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56544 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56545 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56546 = ADVANCED_FACE('',(#56547),#56663,.T.); +#56547 = FACE_BOUND('',#56548,.T.); +#56548 = EDGE_LOOP('',(#56549,#56655,#56656,#56657)); +#56549 = ORIENTED_EDGE('',*,*,#56550,.F.); +#56550 = EDGE_CURVE('',#56409,#56551,#56553,.T.); +#56551 = VERTEX_POINT('',#56552); +#56552 = CARTESIAN_POINT('',(0.6,0.11,0.11)); +#56553 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56554,#56555,#56556,#56557, + #56558,#56559,#56560,#56561,#56562,#56563,#56564,#56565,#56566, + #56567,#56568,#56569,#56570,#56571,#56572,#56573,#56574,#56575, + #56576,#56577,#56578,#56579,#56580,#56581,#56582,#56583,#56584, + #56585,#56586,#56587,#56588,#56589,#56590,#56591,#56592,#56593, + #56594,#56595,#56596,#56597,#56598,#56599,#56600,#56601,#56602, + #56603,#56604,#56605,#56606,#56607,#56608,#56609,#56610,#56611, + #56612,#56613,#56614,#56615,#56616,#56617,#56618,#56619,#56620, + #56621,#56622,#56623,#56624,#56625,#56626,#56627,#56628,#56629, + #56630,#56631,#56632,#56633,#56634,#56635,#56636,#56637,#56638, + #56639,#56640,#56641,#56642,#56643,#56644,#56645,#56646,#56647, + #56648,#56649,#56650,#56651,#56652,#56653,#56654),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027794E-02,6.000005866755E-02,9.000008517035E-02, + 0.120000109788,0.150000132521,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256573, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248472,0.630000241265,0.660000232199,0.690000221276, + 0.720000208498,0.750000193864,0.780000177378,0.810000159041, + 0.840000138853,0.870000116817,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#56554 = CARTESIAN_POINT('',(0.595807377657,0.11,3.E-02)); +#56555 = CARTESIAN_POINT('',(0.595838822324,0.11,3.059999998111E-02)); +#56556 = CARTESIAN_POINT('',(0.595870266991,0.11,3.119999997481E-02)); +#56557 = CARTESIAN_POINT('',(0.595901711659,0.11,3.179999998111E-02)); +#56558 = CARTESIAN_POINT('',(0.595964600994,0.11,3.299999998113E-02)); +#56559 = CARTESIAN_POINT('',(0.595996045661,0.11,3.359999997484E-02)); +#56560 = CARTESIAN_POINT('',(0.596027490329,0.11,3.419999998113E-02)); +#56561 = CARTESIAN_POINT('',(0.596090379664,0.11,3.539999998115E-02)); +#56562 = CARTESIAN_POINT('',(0.596121824332,0.11,3.599999997486E-02)); +#56563 = CARTESIAN_POINT('',(0.596153269,0.11,3.659999998115E-02)); +#56564 = CARTESIAN_POINT('',(0.596216158335,0.11,3.779999998117E-02)); +#56565 = CARTESIAN_POINT('',(0.596247603002,0.11,3.839999997489E-02)); +#56566 = CARTESIAN_POINT('',(0.59627904767,0.11,3.899999998117E-02)); +#56567 = CARTESIAN_POINT('',(0.596341937005,0.11,4.019999998118E-02)); +#56568 = CARTESIAN_POINT('',(0.596373381672,0.11,4.079999997491E-02)); +#56569 = CARTESIAN_POINT('',(0.59640482634,0.11,4.139999998119E-02)); +#56570 = CARTESIAN_POINT('',(0.596467715675,0.11,4.25999999812E-02)); +#56571 = CARTESIAN_POINT('',(0.596499160343,0.11,4.319999997494E-02)); +#56572 = CARTESIAN_POINT('',(0.59653060501,0.11,4.379999998121E-02)); +#56573 = CARTESIAN_POINT('',(0.596593494346,0.11,4.499999998122E-02)); +#56574 = CARTESIAN_POINT('',(0.596624939013,0.11,4.559999997496E-02)); +#56575 = CARTESIAN_POINT('',(0.596656383681,0.11,4.619999998123E-02)); +#56576 = CARTESIAN_POINT('',(0.596719273016,0.11,4.739999998124E-02)); +#56577 = CARTESIAN_POINT('',(0.596750717683,0.11,4.799999997498E-02)); +#56578 = CARTESIAN_POINT('',(0.596782162351,0.11,4.859999998125E-02)); +#56579 = CARTESIAN_POINT('',(0.596845051686,0.11,4.979999998126E-02)); +#56580 = CARTESIAN_POINT('',(0.596876496353,0.11,5.039999997501E-02)); +#56581 = CARTESIAN_POINT('',(0.596907941021,0.11,5.099999998127E-02)); +#56582 = CARTESIAN_POINT('',(0.596970830356,0.11,5.219999998128E-02)); +#56583 = CARTESIAN_POINT('',(0.597002275024,0.11,5.279999997503E-02)); +#56584 = CARTESIAN_POINT('',(0.597033719692,0.11,5.339999998129E-02)); +#56585 = CARTESIAN_POINT('',(0.597096609027,0.11,5.45999999813E-02)); +#56586 = CARTESIAN_POINT('',(0.597128053694,0.11,5.519999997506E-02)); +#56587 = CARTESIAN_POINT('',(0.597159498362,0.11,5.579999998131E-02)); +#56588 = CARTESIAN_POINT('',(0.597222387697,0.11,5.699999998132E-02)); +#56589 = CARTESIAN_POINT('',(0.597253832364,0.11,5.759999997508E-02)); +#56590 = CARTESIAN_POINT('',(0.597285277032,0.11,5.819999998133E-02)); +#56591 = CARTESIAN_POINT('',(0.597348166367,0.11,5.939999998134E-02)); +#56592 = CARTESIAN_POINT('',(0.597379611035,0.11,5.99999999751E-02)); +#56593 = CARTESIAN_POINT('',(0.597411055702,0.11,6.059999998134E-02)); +#56594 = CARTESIAN_POINT('',(0.597473945038,0.11,6.179999998136E-02)); +#56595 = CARTESIAN_POINT('',(0.597505389705,0.11,6.239999997513E-02)); +#56596 = CARTESIAN_POINT('',(0.597536834373,0.11,6.299999998136E-02)); +#56597 = CARTESIAN_POINT('',(0.597599723708,0.11,6.419999998138E-02)); +#56598 = CARTESIAN_POINT('',(0.597631168375,0.11,6.479999997515E-02)); +#56599 = CARTESIAN_POINT('',(0.597662613043,0.11,6.539999998138E-02)); +#56600 = CARTESIAN_POINT('',(0.597725502378,0.11,6.659999998139E-02)); +#56601 = CARTESIAN_POINT('',(0.597756947045,0.11,6.719999997518E-02)); +#56602 = CARTESIAN_POINT('',(0.597788391713,0.11,6.77999999814E-02)); +#56603 = CARTESIAN_POINT('',(0.597851281048,0.11,6.899999998141E-02)); +#56604 = CARTESIAN_POINT('',(0.597882725716,0.11,6.95999999752E-02)); +#56605 = CARTESIAN_POINT('',(0.597914170384,0.11,7.019999998142E-02)); +#56606 = CARTESIAN_POINT('',(0.597977059719,0.11,7.139999998143E-02)); +#56607 = CARTESIAN_POINT('',(0.598008504386,0.11,7.199999997522E-02)); +#56608 = CARTESIAN_POINT('',(0.598039949054,0.11,7.259999998144E-02)); +#56609 = CARTESIAN_POINT('',(0.598102838389,0.11,7.379999998145E-02)); +#56610 = CARTESIAN_POINT('',(0.598134283056,0.11,7.439999997525E-02)); +#56611 = CARTESIAN_POINT('',(0.598165727724,0.11,7.499999998146E-02)); +#56612 = CARTESIAN_POINT('',(0.598228617059,0.11,7.619999998147E-02)); +#56613 = CARTESIAN_POINT('',(0.598260061727,0.11,7.679999997527E-02)); +#56614 = CARTESIAN_POINT('',(0.598291506394,0.11,7.739999998148E-02)); +#56615 = CARTESIAN_POINT('',(0.59835439573,0.11,7.859999998149E-02)); +#56616 = CARTESIAN_POINT('',(0.598385840397,0.11,7.919999997529E-02)); +#56617 = CARTESIAN_POINT('',(0.598417285065,0.11,7.97999999815E-02)); +#56618 = CARTESIAN_POINT('',(0.5984801744,0.11,8.099999998151E-02)); +#56619 = CARTESIAN_POINT('',(0.598511619067,0.11,8.159999997532E-02)); +#56620 = CARTESIAN_POINT('',(0.598543063735,0.11,8.219999998151E-02)); +#56621 = CARTESIAN_POINT('',(0.59860595307,0.11,8.339999998153E-02)); +#56622 = CARTESIAN_POINT('',(0.598637397737,0.11,8.399999997534E-02)); +#56623 = CARTESIAN_POINT('',(0.598668842405,0.11,8.459999998153E-02)); +#56624 = CARTESIAN_POINT('',(0.59873173174,0.11,8.579999998155E-02)); +#56625 = CARTESIAN_POINT('',(0.598763176408,0.11,8.639999997537E-02)); +#56626 = CARTESIAN_POINT('',(0.598794621076,0.11,8.699999998155E-02)); +#56627 = CARTESIAN_POINT('',(0.598857510411,0.11,8.819999998156E-02)); +#56628 = CARTESIAN_POINT('',(0.598888955078,0.11,8.879999997539E-02)); +#56629 = CARTESIAN_POINT('',(0.598920399746,0.11,8.939999998157E-02)); +#56630 = CARTESIAN_POINT('',(0.598983289081,0.11,9.059999998158E-02)); +#56631 = CARTESIAN_POINT('',(0.599014733748,0.11,9.119999997541E-02)); +#56632 = CARTESIAN_POINT('',(0.599046178416,0.11,9.179999998159E-02)); +#56633 = CARTESIAN_POINT('',(0.599109067751,0.11,9.29999999816E-02)); +#56634 = CARTESIAN_POINT('',(0.599140512418,0.11,9.359999997544E-02)); +#56635 = CARTESIAN_POINT('',(0.599171957086,0.11,9.419999998161E-02)); +#56636 = CARTESIAN_POINT('',(0.599234846422,0.11,9.539999998162E-02)); +#56637 = CARTESIAN_POINT('',(0.599266291089,0.11,9.599999997546E-02)); +#56638 = CARTESIAN_POINT('',(0.599297735757,0.11,9.659999998163E-02)); +#56639 = CARTESIAN_POINT('',(0.599360625092,0.11,9.779999998164E-02)); +#56640 = CARTESIAN_POINT('',(0.599392069759,0.11,9.839999997548E-02)); +#56641 = CARTESIAN_POINT('',(0.599423514427,0.11,9.899999998165E-02)); +#56642 = CARTESIAN_POINT('',(0.599486403762,0.11,0.100199999982)); +#56643 = CARTESIAN_POINT('',(0.599517848429,0.11,0.100799999976)); +#56644 = CARTESIAN_POINT('',(0.599549293097,0.11,0.101399999982)); +#56645 = CARTESIAN_POINT('',(0.599612182432,0.11,0.102599999982)); +#56646 = CARTESIAN_POINT('',(0.5996436271,0.11,0.103199999976)); +#56647 = CARTESIAN_POINT('',(0.599675071767,0.11,0.103799999982)); +#56648 = CARTESIAN_POINT('',(0.599737961103,0.11,0.104999999982)); +#56649 = CARTESIAN_POINT('',(0.59976940577,0.11,0.105599999976)); +#56650 = CARTESIAN_POINT('',(0.599800850438,0.11,0.106199999982)); +#56651 = CARTESIAN_POINT('',(0.599874221328,0.11,0.107599999967)); +#56652 = CARTESIAN_POINT('',(0.599916147551,0.11,0.108399999956)); +#56653 = CARTESIAN_POINT('',(0.599958073775,0.11,0.109199999967)); +#56654 = CARTESIAN_POINT('',(0.6,0.11,0.11)); +#56655 = ORIENTED_EDGE('',*,*,#56408,.T.); +#56656 = ORIENTED_EDGE('',*,*,#56263,.T.); +#56657 = ORIENTED_EDGE('',*,*,#56658,.F.); +#56658 = EDGE_CURVE('',#56551,#56264,#56659,.T.); +#56659 = LINE('',#56660,#56661); +#56660 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56661 = VECTOR('',#56662,1.); +#56662 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56663 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56664,#56665) + ,(#56666,#56667 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56664 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56665 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56666 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56667 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56668 = ADVANCED_FACE('',(#56669),#56791,.T.); +#56669 = FACE_BOUND('',#56670,.T.); +#56670 = EDGE_LOOP('',(#56671,#56678,#56679,#56785)); +#56671 = ORIENTED_EDGE('',*,*,#56672,.F.); +#56672 = EDGE_CURVE('',#56384,#56673,#56675,.T.); +#56673 = VERTEX_POINT('',#56674); +#56674 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56675 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56676,#56677),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56676 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56677 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56678 = ORIENTED_EDGE('',*,*,#56383,.T.); +#56679 = ORIENTED_EDGE('',*,*,#56680,.T.); +#56680 = EDGE_CURVE('',#56386,#56681,#56683,.T.); +#56681 = VERTEX_POINT('',#56682); +#56682 = CARTESIAN_POINT('',(-0.6,0.61,0.11)); +#56683 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56684,#56685,#56686,#56687, + #56688,#56689,#56690,#56691,#56692,#56693,#56694,#56695,#56696, + #56697,#56698,#56699,#56700,#56701,#56702,#56703,#56704,#56705, + #56706,#56707,#56708,#56709,#56710,#56711,#56712,#56713,#56714, + #56715,#56716,#56717,#56718,#56719,#56720,#56721,#56722,#56723, + #56724,#56725,#56726,#56727,#56728,#56729,#56730,#56731,#56732, + #56733,#56734,#56735,#56736,#56737,#56738,#56739,#56740,#56741, + #56742,#56743,#56744,#56745,#56746,#56747,#56748,#56749,#56750, + #56751,#56752,#56753,#56754,#56755,#56756,#56757,#56758,#56759, + #56760,#56761,#56762,#56763,#56764,#56765,#56766,#56767,#56768, + #56769,#56770,#56771,#56772,#56773,#56774,#56775,#56776,#56777, + #56778,#56779,#56780,#56781,#56782,#56783,#56784),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527395E-02,6.000171535364E-02,9.000249028103E-02, + 0.120003210098,0.150003874847,0.180004484568,0.210005039305, + 0.240005539099,0.270005983991,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.42000738639,0.450007502748, + 0.480007564495,0.510007571673,0.540007524324,0.570007422489, + 0.600007266208,0.630007055524,0.660006790478,0.69000647111, + 0.720006097462,0.750005669575,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#56684 = CARTESIAN_POINT('',(-0.595807377657,0.61,3.E-02)); +#56685 = CARTESIAN_POINT('',(-0.595838822296,0.61,3.059999944783E-02)); +#56686 = CARTESIAN_POINT('',(-0.595870266954,0.61,3.119999926388E-02)); +#56687 = CARTESIAN_POINT('',(-0.595901711631,0.61,3.179999944803E-02)); +#56688 = CARTESIAN_POINT('',(-0.595964600966,0.61,3.299999944838E-02)); +#56689 = CARTESIAN_POINT('',(-0.595996045624,0.61,3.359999926458E-02)); +#56690 = CARTESIAN_POINT('',(-0.596027490301,0.61,3.419999944858E-02)); +#56691 = CARTESIAN_POINT('',(-0.596090379637,0.61,3.539999944893E-02)); +#56692 = CARTESIAN_POINT('',(-0.596121824295,0.61,3.599999926526E-02)); +#56693 = CARTESIAN_POINT('',(-0.596153268972,0.61,3.659999944913E-02)); +#56694 = CARTESIAN_POINT('',(-0.596216158307,0.61,3.779999944948E-02)); +#56695 = CARTESIAN_POINT('',(-0.596247602965,0.61,3.839999926595E-02)); +#56696 = CARTESIAN_POINT('',(-0.596279047642,0.61,3.899999944968E-02)); +#56697 = CARTESIAN_POINT('',(-0.596341936977,0.61,4.019999945003E-02)); +#56698 = CARTESIAN_POINT('',(-0.596373381635,0.61,4.079999926664E-02)); +#56699 = CARTESIAN_POINT('',(-0.596404826312,0.61,4.139999945023E-02)); +#56700 = CARTESIAN_POINT('',(-0.596467715648,0.61,4.259999945058E-02)); +#56701 = CARTESIAN_POINT('',(-0.596499160305,0.61,4.319999926733E-02)); +#56702 = CARTESIAN_POINT('',(-0.596530604983,0.61,4.379999945078E-02)); +#56703 = CARTESIAN_POINT('',(-0.596593494318,0.61,4.499999945112E-02)); +#56704 = CARTESIAN_POINT('',(-0.596624938976,0.61,4.559999926801E-02)); +#56705 = CARTESIAN_POINT('',(-0.596656383653,0.61,4.619999945133E-02)); +#56706 = CARTESIAN_POINT('',(-0.596719272988,0.61,4.739999945167E-02)); +#56707 = CARTESIAN_POINT('',(-0.596750717646,0.61,4.79999992687E-02)); +#56708 = CARTESIAN_POINT('',(-0.596782162323,0.61,4.859999945188E-02)); +#56709 = CARTESIAN_POINT('',(-0.596845051658,0.61,4.979999945222E-02)); +#56710 = CARTESIAN_POINT('',(-0.596876496316,0.61,5.039999926939E-02)); +#56711 = CARTESIAN_POINT('',(-0.596907940994,0.61,5.099999945242E-02)); +#56712 = CARTESIAN_POINT('',(-0.596970830329,0.61,5.219999945277E-02)); +#56713 = CARTESIAN_POINT('',(-0.597002274987,0.61,5.279999927007E-02)); +#56714 = CARTESIAN_POINT('',(-0.597033719664,0.61,5.339999945297E-02)); +#56715 = CARTESIAN_POINT('',(-0.597096608999,0.61,5.459999945331E-02)); +#56716 = CARTESIAN_POINT('',(-0.597128053657,0.61,5.519999927076E-02)); +#56717 = CARTESIAN_POINT('',(-0.597159498334,0.61,5.579999945351E-02)); +#56718 = CARTESIAN_POINT('',(-0.597222387669,0.61,5.699999945386E-02)); +#56719 = CARTESIAN_POINT('',(-0.597253832327,0.61,5.759999927144E-02)); +#56720 = CARTESIAN_POINT('',(-0.597285277005,0.61,5.819999945406E-02)); +#56721 = CARTESIAN_POINT('',(-0.59734816634,0.61,5.93999994544E-02)); +#56722 = CARTESIAN_POINT('',(-0.597379610998,0.61,5.999999927213E-02)); +#56723 = CARTESIAN_POINT('',(-0.597411055675,0.61,6.059999945461E-02)); +#56724 = CARTESIAN_POINT('',(-0.59747394501,0.61,6.179999945495E-02)); +#56725 = CARTESIAN_POINT('',(-0.597505389668,0.61,6.239999927281E-02)); +#56726 = CARTESIAN_POINT('',(-0.597536834345,0.61,6.299999945515E-02)); +#56727 = CARTESIAN_POINT('',(-0.59759972368,0.61,6.419999945549E-02)); +#56728 = CARTESIAN_POINT('',(-0.597631168338,0.61,6.479999927349E-02)); +#56729 = CARTESIAN_POINT('',(-0.597662613015,0.61,6.539999945569E-02)); +#56730 = CARTESIAN_POINT('',(-0.597725502351,0.61,6.659999945604E-02)); +#56731 = CARTESIAN_POINT('',(-0.597756947009,0.61,6.719999927417E-02)); +#56732 = CARTESIAN_POINT('',(-0.597788391686,0.61,6.779999945624E-02)); +#56733 = CARTESIAN_POINT('',(-0.597851281021,0.61,6.899999945658E-02)); +#56734 = CARTESIAN_POINT('',(-0.597882725679,0.61,6.959999927485E-02)); +#56735 = CARTESIAN_POINT('',(-0.597914170356,0.61,7.019999945678E-02)); +#56736 = CARTESIAN_POINT('',(-0.597977059691,0.61,7.139999945712E-02)); +#56737 = CARTESIAN_POINT('',(-0.598008504349,0.61,7.199999927553E-02)); +#56738 = CARTESIAN_POINT('',(-0.598039949026,0.61,7.259999945732E-02)); +#56739 = CARTESIAN_POINT('',(-0.598102838362,0.61,7.379999945766E-02)); +#56740 = CARTESIAN_POINT('',(-0.59813428302,0.61,7.439999927621E-02)); +#56741 = CARTESIAN_POINT('',(-0.598165727697,0.61,7.499999945787E-02)); +#56742 = CARTESIAN_POINT('',(-0.598228617032,0.61,7.619999945821E-02)); +#56743 = CARTESIAN_POINT('',(-0.59826006169,0.61,7.679999927689E-02)); +#56744 = CARTESIAN_POINT('',(-0.598291506367,0.61,7.739999945841E-02)); +#56745 = CARTESIAN_POINT('',(-0.598354395702,0.61,7.859999945875E-02)); +#56746 = CARTESIAN_POINT('',(-0.59838584036,0.61,7.919999927757E-02)); +#56747 = CARTESIAN_POINT('',(-0.598417285037,0.61,7.979999945895E-02)); +#56748 = CARTESIAN_POINT('',(-0.598480174372,0.61,8.099999945929E-02)); +#56749 = CARTESIAN_POINT('',(-0.598511619031,0.61,8.159999927825E-02)); +#56750 = CARTESIAN_POINT('',(-0.598543063708,0.61,8.219999945949E-02)); +#56751 = CARTESIAN_POINT('',(-0.598605953043,0.61,8.339999945983E-02)); +#56752 = CARTESIAN_POINT('',(-0.598637397701,0.61,8.399999927893E-02)); +#56753 = CARTESIAN_POINT('',(-0.598668842378,0.61,8.459999946003E-02)); +#56754 = CARTESIAN_POINT('',(-0.598731731713,0.61,8.579999946037E-02)); +#56755 = CARTESIAN_POINT('',(-0.598763176371,0.61,8.63999992796E-02)); +#56756 = CARTESIAN_POINT('',(-0.598794621048,0.61,8.699999946057E-02)); +#56757 = CARTESIAN_POINT('',(-0.598857510383,0.61,8.819999946091E-02)); +#56758 = CARTESIAN_POINT('',(-0.598888955041,0.61,8.879999928028E-02)); +#56759 = CARTESIAN_POINT('',(-0.598920399719,0.61,8.939999946111E-02)); +#56760 = CARTESIAN_POINT('',(-0.598983289054,0.61,9.059999946145E-02)); +#56761 = CARTESIAN_POINT('',(-0.599014733712,0.61,9.119999928096E-02)); +#56762 = CARTESIAN_POINT('',(-0.599046178389,0.61,9.179999946165E-02)); +#56763 = CARTESIAN_POINT('',(-0.599109067724,0.61,9.299999946199E-02)); +#56764 = CARTESIAN_POINT('',(-0.599140512382,0.61,9.359999928163E-02)); +#56765 = CARTESIAN_POINT('',(-0.599171957059,0.61,9.419999946219E-02)); +#56766 = CARTESIAN_POINT('',(-0.599234846394,0.61,9.539999946253E-02)); +#56767 = CARTESIAN_POINT('',(-0.599266291052,0.61,9.599999928231E-02)); +#56768 = CARTESIAN_POINT('',(-0.599297735729,0.61,9.659999946273E-02)); +#56769 = CARTESIAN_POINT('',(-0.599360625065,0.61,9.779999946306E-02)); +#56770 = CARTESIAN_POINT('',(-0.599392069723,0.61,9.839999928298E-02)); +#56771 = CARTESIAN_POINT('',(-0.5994235144,0.61,9.899999946326E-02)); +#56772 = CARTESIAN_POINT('',(-0.599486403735,0.61,0.100199999464)); +#56773 = CARTESIAN_POINT('',(-0.599517848393,0.61,0.100799999284)); +#56774 = CARTESIAN_POINT('',(-0.59954929307,0.61,0.101399999464)); +#56775 = CARTESIAN_POINT('',(-0.599612182405,0.61,0.102599999464)); +#56776 = CARTESIAN_POINT('',(-0.599643627063,0.61,0.103199999284)); +#56777 = CARTESIAN_POINT('',(-0.59967507174,0.61,0.103799999464)); +#56778 = CARTESIAN_POINT('',(-0.599737961076,0.61,0.104999999465)); +#56779 = CARTESIAN_POINT('',(-0.599769405734,0.61,0.105599999285)); +#56780 = CARTESIAN_POINT('',(-0.599800850411,0.61,0.106199999465)); +#56781 = CARTESIAN_POINT('',(-0.59987422128,0.61,0.107599999045)); +#56782 = CARTESIAN_POINT('',(-0.599916147486,0.61,0.108399998725)); +#56783 = CARTESIAN_POINT('',(-0.599958073726,0.61,0.109199999043)); +#56784 = CARTESIAN_POINT('',(-0.6,0.61,0.11)); +#56785 = ORIENTED_EDGE('',*,*,#56786,.F.); +#56786 = EDGE_CURVE('',#56673,#56681,#56787,.T.); +#56787 = LINE('',#56788,#56789); +#56788 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56789 = VECTOR('',#56790,1.); +#56790 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56791 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56792,#56793) + ,(#56794,#56795 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56792 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56793 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56794 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#56795 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#56796 = ADVANCED_FACE('',(#56797),#56808,.T.); +#56797 = FACE_BOUND('',#56798,.T.); +#56798 = EDGE_LOOP('',(#56799,#56800,#56801,#56807)); +#56799 = ORIENTED_EDGE('',*,*,#56393,.T.); +#56800 = ORIENTED_EDGE('',*,*,#56672,.T.); +#56801 = ORIENTED_EDGE('',*,*,#56802,.F.); +#56802 = EDGE_CURVE('',#56530,#56673,#56803,.T.); +#56803 = LINE('',#56804,#56805); +#56804 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56805 = VECTOR('',#56806,1.); +#56806 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#56807 = ORIENTED_EDGE('',*,*,#56529,.F.); +#56808 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56809,#56810) + ,(#56811,#56812 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56809 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56810 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56811 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56812 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56813 = ADVANCED_FACE('',(#56814),#56839,.F.); +#56814 = FACE_BOUND('',#56815,.F.); +#56815 = EDGE_LOOP('',(#56816,#56824,#56832,#56838)); +#56816 = ORIENTED_EDGE('',*,*,#56817,.F.); +#56817 = EDGE_CURVE('',#56818,#56386,#56820,.T.); +#56818 = VERTEX_POINT('',#56819); +#56819 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56820 = LINE('',#56821,#56822); +#56821 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56822 = VECTOR('',#56823,1.); +#56823 = DIRECTION('',(0.,0.,1.)); +#56824 = ORIENTED_EDGE('',*,*,#56825,.T.); +#56825 = EDGE_CURVE('',#56818,#56826,#56828,.T.); +#56826 = VERTEX_POINT('',#56827); +#56827 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#56828 = LINE('',#56829,#56830); +#56829 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56830 = VECTOR('',#56831,1.); +#56831 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56832 = ORIENTED_EDGE('',*,*,#56833,.T.); +#56833 = EDGE_CURVE('',#56826,#56489,#56834,.T.); +#56834 = LINE('',#56835,#56836); +#56835 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#56836 = VECTOR('',#56837,1.); +#56837 = DIRECTION('',(0.,0.,1.)); +#56838 = ORIENTED_EDGE('',*,*,#56496,.F.); +#56839 = PLANE('',#56840); +#56840 = AXIS2_PLACEMENT_3D('',#56841,#56842,#56843); +#56841 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56842 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56843 = DIRECTION('',(0.,0.,1.)); +#56844 = ADVANCED_FACE('',(#56845),#57066,.T.); +#56845 = FACE_BOUND('',#56846,.T.); +#56846 = EDGE_LOOP('',(#56847,#56953,#56954,#57060)); +#56847 = ORIENTED_EDGE('',*,*,#56848,.F.); +#56848 = EDGE_CURVE('',#56489,#56849,#56851,.T.); +#56849 = VERTEX_POINT('',#56850); +#56850 = CARTESIAN_POINT('',(-0.6,0.39,0.11)); +#56851 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56852,#56853,#56854,#56855, + #56856,#56857,#56858,#56859,#56860,#56861,#56862,#56863,#56864, + #56865,#56866,#56867,#56868,#56869,#56870,#56871,#56872,#56873, + #56874,#56875,#56876,#56877,#56878,#56879,#56880,#56881,#56882, + #56883,#56884,#56885,#56886,#56887,#56888,#56889,#56890,#56891, + #56892,#56893,#56894,#56895,#56896,#56897,#56898,#56899,#56900, + #56901,#56902,#56903,#56904,#56905,#56906,#56907,#56908,#56909, + #56910,#56911,#56912,#56913,#56914,#56915,#56916,#56917,#56918, + #56919,#56920,#56921,#56922,#56923,#56924,#56925,#56926,#56927, + #56928,#56929,#56930,#56931,#56932,#56933,#56934,#56935,#56936, + #56937,#56938,#56939,#56940,#56941,#56942,#56943,#56944,#56945, + #56946,#56947,#56948,#56949,#56950,#56951,#56952),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000037299324E-02,6.000072272736E-02,9.000104922047E-02, + 0.120001352491,0.150001632556,0.180001889434,0.210002123143, + 0.240002333702,0.270002521127,0.300002685437,0.33000282665, + 0.360002944785,0.390003039857,0.420003111887,0.450003160891, + 0.480003186887,0.510003189893,0.540003169928,0.570003127008, + 0.600003061152,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.81000195943, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.96000048829,1.),.UNSPECIFIED.); +#56852 = CARTESIAN_POINT('',(-0.595807377657,0.39,3.E-02)); +#56853 = CARTESIAN_POINT('',(-0.595838822313,0.39,3.059999976731E-02)); +#56854 = CARTESIAN_POINT('',(-0.595870266976,0.39,3.119999968979E-02)); +#56855 = CARTESIAN_POINT('',(-0.595901711648,0.39,3.179999976739E-02)); +#56856 = CARTESIAN_POINT('',(-0.595964600983,0.39,3.299999976754E-02)); +#56857 = CARTESIAN_POINT('',(-0.595996045647,0.39,3.359999969008E-02)); +#56858 = CARTESIAN_POINT('',(-0.596027490318,0.39,3.419999976763E-02)); +#56859 = CARTESIAN_POINT('',(-0.596090379653,0.39,3.539999976777E-02)); +#56860 = CARTESIAN_POINT('',(-0.596121824317,0.39,3.599999969038E-02)); +#56861 = CARTESIAN_POINT('',(-0.596153268988,0.39,3.659999976786E-02)); +#56862 = CARTESIAN_POINT('',(-0.596216158324,0.39,3.779999976801E-02)); +#56863 = CARTESIAN_POINT('',(-0.596247602987,0.39,3.839999969067E-02)); +#56864 = CARTESIAN_POINT('',(-0.596279047659,0.39,3.899999976809E-02)); +#56865 = CARTESIAN_POINT('',(-0.596341936994,0.39,4.019999976824E-02)); +#56866 = CARTESIAN_POINT('',(-0.596373381657,0.39,4.079999969097E-02)); +#56867 = CARTESIAN_POINT('',(-0.596404826329,0.39,4.139999976833E-02)); +#56868 = CARTESIAN_POINT('',(-0.596467715664,0.39,4.259999976848E-02)); +#56869 = CARTESIAN_POINT('',(-0.596499160328,0.39,4.319999969126E-02)); +#56870 = CARTESIAN_POINT('',(-0.596530604999,0.39,4.379999976856E-02)); +#56871 = CARTESIAN_POINT('',(-0.596593494334,0.39,4.499999976871E-02)); +#56872 = CARTESIAN_POINT('',(-0.596624938998,0.39,4.559999969155E-02)); +#56873 = CARTESIAN_POINT('',(-0.59665638367,0.39,4.61999997688E-02)); +#56874 = CARTESIAN_POINT('',(-0.596719273005,0.39,4.739999976894E-02)); +#56875 = CARTESIAN_POINT('',(-0.596750717668,0.39,4.799999969185E-02)); +#56876 = CARTESIAN_POINT('',(-0.59678216234,0.39,4.859999976903E-02)); +#56877 = CARTESIAN_POINT('',(-0.596845051675,0.39,4.979999976918E-02)); +#56878 = CARTESIAN_POINT('',(-0.596876496339,0.39,5.039999969214E-02)); +#56879 = CARTESIAN_POINT('',(-0.59690794101,0.39,5.099999976926E-02)); +#56880 = CARTESIAN_POINT('',(-0.596970830345,0.39,5.219999976941E-02)); +#56881 = CARTESIAN_POINT('',(-0.597002275009,0.39,5.279999969243E-02)); +#56882 = CARTESIAN_POINT('',(-0.59703371968,0.39,5.339999976949E-02)); +#56883 = CARTESIAN_POINT('',(-0.597096609016,0.39,5.459999976964E-02)); +#56884 = CARTESIAN_POINT('',(-0.597128053679,0.39,5.519999969272E-02)); +#56885 = CARTESIAN_POINT('',(-0.597159498351,0.39,5.579999976973E-02)); +#56886 = CARTESIAN_POINT('',(-0.597222387686,0.39,5.699999976987E-02)); +#56887 = CARTESIAN_POINT('',(-0.597253832349,0.39,5.759999969302E-02)); +#56888 = CARTESIAN_POINT('',(-0.597285277021,0.39,5.819999976996E-02)); +#56889 = CARTESIAN_POINT('',(-0.597348166356,0.39,5.939999977011E-02)); +#56890 = CARTESIAN_POINT('',(-0.59737961102,0.39,5.999999969331E-02)); +#56891 = CARTESIAN_POINT('',(-0.597411055691,0.39,6.059999977019E-02)); +#56892 = CARTESIAN_POINT('',(-0.597473945027,0.39,6.179999977034E-02)); +#56893 = CARTESIAN_POINT('',(-0.59750538969,0.39,6.23999996936E-02)); +#56894 = CARTESIAN_POINT('',(-0.597536834362,0.39,6.299999977042E-02)); +#56895 = CARTESIAN_POINT('',(-0.597599723697,0.39,6.419999977057E-02)); +#56896 = CARTESIAN_POINT('',(-0.59763116836,0.39,6.479999969389E-02)); +#56897 = CARTESIAN_POINT('',(-0.597662613032,0.39,6.539999977066E-02)); +#56898 = CARTESIAN_POINT('',(-0.597725502367,0.39,6.65999997708E-02)); +#56899 = CARTESIAN_POINT('',(-0.597756947031,0.39,6.719999969418E-02)); +#56900 = CARTESIAN_POINT('',(-0.597788391702,0.39,6.779999977089E-02)); +#56901 = CARTESIAN_POINT('',(-0.597851281037,0.39,6.899999977103E-02)); +#56902 = CARTESIAN_POINT('',(-0.597882725701,0.39,6.959999969447E-02)); +#56903 = CARTESIAN_POINT('',(-0.597914170373,0.39,7.019999977112E-02)); +#56904 = CARTESIAN_POINT('',(-0.597977059708,0.39,7.139999977126E-02)); +#56905 = CARTESIAN_POINT('',(-0.598008504371,0.39,7.199999969476E-02)); +#56906 = CARTESIAN_POINT('',(-0.598039949043,0.39,7.259999977135E-02)); +#56907 = CARTESIAN_POINT('',(-0.598102838378,0.39,7.379999977149E-02)); +#56908 = CARTESIAN_POINT('',(-0.598134283042,0.39,7.439999969505E-02)); +#56909 = CARTESIAN_POINT('',(-0.598165727713,0.39,7.499999977158E-02)); +#56910 = CARTESIAN_POINT('',(-0.598228617048,0.39,7.619999977173E-02)); +#56911 = CARTESIAN_POINT('',(-0.598260061712,0.39,7.679999969534E-02)); +#56912 = CARTESIAN_POINT('',(-0.598291506383,0.39,7.739999977181E-02)); +#56913 = CARTESIAN_POINT('',(-0.598354395719,0.39,7.859999977196E-02)); +#56914 = CARTESIAN_POINT('',(-0.598385840382,0.39,7.919999969563E-02)); +#56915 = CARTESIAN_POINT('',(-0.598417285054,0.39,7.979999977204E-02)); +#56916 = CARTESIAN_POINT('',(-0.598480174389,0.39,8.099999977219E-02)); +#56917 = CARTESIAN_POINT('',(-0.598511619052,0.39,8.159999969592E-02)); +#56918 = CARTESIAN_POINT('',(-0.598543063724,0.39,8.219999977227E-02)); +#56919 = CARTESIAN_POINT('',(-0.598605953059,0.39,8.339999977242E-02)); +#56920 = CARTESIAN_POINT('',(-0.598637397723,0.39,8.399999969621E-02)); +#56921 = CARTESIAN_POINT('',(-0.598668842394,0.39,8.45999997725E-02)); +#56922 = CARTESIAN_POINT('',(-0.598731731729,0.39,8.579999977265E-02)); +#56923 = CARTESIAN_POINT('',(-0.598763176393,0.39,8.63999996965E-02)); +#56924 = CARTESIAN_POINT('',(-0.598794621065,0.39,8.699999977273E-02)); +#56925 = CARTESIAN_POINT('',(-0.5988575104,0.39,8.819999977288E-02)); +#56926 = CARTESIAN_POINT('',(-0.598888955063,0.39,8.879999969679E-02)); +#56927 = CARTESIAN_POINT('',(-0.598920399735,0.39,8.939999977296E-02)); +#56928 = CARTESIAN_POINT('',(-0.59898328907,0.39,9.059999977311E-02)); +#56929 = CARTESIAN_POINT('',(-0.599014733734,0.39,9.119999969708E-02)); +#56930 = CARTESIAN_POINT('',(-0.599046178405,0.39,9.179999977319E-02)); +#56931 = CARTESIAN_POINT('',(-0.59910906774,0.39,9.299999977334E-02)); +#56932 = CARTESIAN_POINT('',(-0.599140512404,0.39,9.359999969737E-02)); +#56933 = CARTESIAN_POINT('',(-0.599171957075,0.39,9.419999977342E-02)); +#56934 = CARTESIAN_POINT('',(-0.599234846411,0.39,9.539999977356E-02)); +#56935 = CARTESIAN_POINT('',(-0.599266291074,0.39,9.599999969765E-02)); +#56936 = CARTESIAN_POINT('',(-0.599297735746,0.39,9.659999977365E-02)); +#56937 = CARTESIAN_POINT('',(-0.599360625081,0.39,9.779999977379E-02)); +#56938 = CARTESIAN_POINT('',(-0.599392069744,0.39,9.839999969794E-02)); +#56939 = CARTESIAN_POINT('',(-0.599423514416,0.39,9.899999977388E-02)); +#56940 = CARTESIAN_POINT('',(-0.599486403751,0.39,0.100199999774)); +#56941 = CARTESIAN_POINT('',(-0.599517848415,0.39,0.100799999698)); +#56942 = CARTESIAN_POINT('',(-0.599549293086,0.39,0.101399999774)); +#56943 = CARTESIAN_POINT('',(-0.599612182421,0.39,0.102599999774)); +#56944 = CARTESIAN_POINT('',(-0.599643627085,0.39,0.103199999699)); +#56945 = CARTESIAN_POINT('',(-0.599675071757,0.39,0.103799999774)); +#56946 = CARTESIAN_POINT('',(-0.599737961092,0.39,0.104999999774)); +#56947 = CARTESIAN_POINT('',(-0.599769405755,0.39,0.105599999699)); +#56948 = CARTESIAN_POINT('',(-0.599800850427,0.39,0.106199999775)); +#56949 = CARTESIAN_POINT('',(-0.599874221309,0.39,0.107599999598)); +#56950 = CARTESIAN_POINT('',(-0.599916147525,0.39,0.108399999463)); +#56951 = CARTESIAN_POINT('',(-0.599958073755,0.39,0.109199999597)); +#56952 = CARTESIAN_POINT('',(-0.6,0.39,0.11)); +#56953 = ORIENTED_EDGE('',*,*,#56488,.T.); +#56954 = ORIENTED_EDGE('',*,*,#56955,.T.); +#56955 = EDGE_CURVE('',#56481,#56956,#56958,.T.); +#56956 = VERTEX_POINT('',#56957); +#56957 = CARTESIAN_POINT('',(-0.6,0.11,0.11)); +#56958 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56959,#56960,#56961,#56962, + #56963,#56964,#56965,#56966,#56967,#56968,#56969,#56970,#56971, + #56972,#56973,#56974,#56975,#56976,#56977,#56978,#56979,#56980, + #56981,#56982,#56983,#56984,#56985,#56986,#56987,#56988,#56989, + #56990,#56991,#56992,#56993,#56994,#56995,#56996,#56997,#56998, + #56999,#57000,#57001,#57002,#57003,#57004,#57005,#57006,#57007, + #57008,#57009,#57010,#57011,#57012,#57013,#57014,#57015,#57016, + #57017,#57018,#57019,#57020,#57021,#57022,#57023,#57024,#57025, + #57026,#57027,#57028,#57029,#57030,#57031,#57032,#57033,#57034, + #57035,#57036,#57037,#57038,#57039,#57040,#57041,#57042,#57043, + #57044,#57045,#57046,#57047,#57048,#57049,#57050,#57051,#57052, + #57053,#57054,#57055,#57056,#57057,#57058,#57059),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027795E-02,6.000005866758E-02,9.00000851704E-02, + 0.120000109788,0.150000132522,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256573, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248472,0.630000241265,0.6600002322,0.690000221277, + 0.720000208498,0.750000193865,0.780000177379,0.810000159041, + 0.840000138854,0.870000116818,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#56959 = CARTESIAN_POINT('',(-0.595807377657,0.11,3.E-02)); +#56960 = CARTESIAN_POINT('',(-0.595838822324,0.11,3.059999998111E-02)); +#56961 = CARTESIAN_POINT('',(-0.595870266991,0.11,3.119999997481E-02)); +#56962 = CARTESIAN_POINT('',(-0.595901711659,0.11,3.179999998111E-02)); +#56963 = CARTESIAN_POINT('',(-0.595964600994,0.11,3.299999998113E-02)); +#56964 = CARTESIAN_POINT('',(-0.595996045661,0.11,3.359999997484E-02)); +#56965 = CARTESIAN_POINT('',(-0.596027490329,0.11,3.419999998113E-02)); +#56966 = CARTESIAN_POINT('',(-0.596090379664,0.11,3.539999998115E-02)); +#56967 = CARTESIAN_POINT('',(-0.596121824332,0.11,3.599999997486E-02)); +#56968 = CARTESIAN_POINT('',(-0.596153269,0.11,3.659999998115E-02)); +#56969 = CARTESIAN_POINT('',(-0.596216158335,0.11,3.779999998117E-02)); +#56970 = CARTESIAN_POINT('',(-0.596247603002,0.11,3.839999997489E-02)); +#56971 = CARTESIAN_POINT('',(-0.59627904767,0.11,3.899999998117E-02)); +#56972 = CARTESIAN_POINT('',(-0.596341937005,0.11,4.019999998118E-02)); +#56973 = CARTESIAN_POINT('',(-0.596373381672,0.11,4.079999997491E-02)); +#56974 = CARTESIAN_POINT('',(-0.59640482634,0.11,4.139999998119E-02)); +#56975 = CARTESIAN_POINT('',(-0.596467715675,0.11,4.25999999812E-02)); +#56976 = CARTESIAN_POINT('',(-0.596499160343,0.11,4.319999997494E-02)); +#56977 = CARTESIAN_POINT('',(-0.59653060501,0.11,4.379999998121E-02)); +#56978 = CARTESIAN_POINT('',(-0.596593494346,0.11,4.499999998122E-02)); +#56979 = CARTESIAN_POINT('',(-0.596624939013,0.11,4.559999997496E-02)); +#56980 = CARTESIAN_POINT('',(-0.596656383681,0.11,4.619999998123E-02)); +#56981 = CARTESIAN_POINT('',(-0.596719273016,0.11,4.739999998124E-02)); +#56982 = CARTESIAN_POINT('',(-0.596750717683,0.11,4.799999997498E-02)); +#56983 = CARTESIAN_POINT('',(-0.596782162351,0.11,4.859999998125E-02)); +#56984 = CARTESIAN_POINT('',(-0.596845051686,0.11,4.979999998126E-02)); +#56985 = CARTESIAN_POINT('',(-0.596876496353,0.11,5.039999997501E-02)); +#56986 = CARTESIAN_POINT('',(-0.596907941021,0.11,5.099999998127E-02)); +#56987 = CARTESIAN_POINT('',(-0.596970830356,0.11,5.219999998128E-02)); +#56988 = CARTESIAN_POINT('',(-0.597002275024,0.11,5.279999997503E-02)); +#56989 = CARTESIAN_POINT('',(-0.597033719692,0.11,5.339999998129E-02)); +#56990 = CARTESIAN_POINT('',(-0.597096609027,0.11,5.45999999813E-02)); +#56991 = CARTESIAN_POINT('',(-0.597128053694,0.11,5.519999997506E-02)); +#56992 = CARTESIAN_POINT('',(-0.597159498362,0.11,5.579999998131E-02)); +#56993 = CARTESIAN_POINT('',(-0.597222387697,0.11,5.699999998132E-02)); +#56994 = CARTESIAN_POINT('',(-0.597253832364,0.11,5.759999997508E-02)); +#56995 = CARTESIAN_POINT('',(-0.597285277032,0.11,5.819999998133E-02)); +#56996 = CARTESIAN_POINT('',(-0.597348166367,0.11,5.939999998134E-02)); +#56997 = CARTESIAN_POINT('',(-0.597379611035,0.11,5.99999999751E-02)); +#56998 = CARTESIAN_POINT('',(-0.597411055702,0.11,6.059999998134E-02)); +#56999 = CARTESIAN_POINT('',(-0.597473945038,0.11,6.179999998136E-02)); +#57000 = CARTESIAN_POINT('',(-0.597505389705,0.11,6.239999997513E-02)); +#57001 = CARTESIAN_POINT('',(-0.597536834373,0.11,6.299999998136E-02)); +#57002 = CARTESIAN_POINT('',(-0.597599723708,0.11,6.419999998138E-02)); +#57003 = CARTESIAN_POINT('',(-0.597631168375,0.11,6.479999997515E-02)); +#57004 = CARTESIAN_POINT('',(-0.597662613043,0.11,6.539999998138E-02)); +#57005 = CARTESIAN_POINT('',(-0.597725502378,0.11,6.659999998139E-02)); +#57006 = CARTESIAN_POINT('',(-0.597756947045,0.11,6.719999997518E-02)); +#57007 = CARTESIAN_POINT('',(-0.597788391713,0.11,6.77999999814E-02)); +#57008 = CARTESIAN_POINT('',(-0.597851281048,0.11,6.899999998141E-02)); +#57009 = CARTESIAN_POINT('',(-0.597882725716,0.11,6.95999999752E-02)); +#57010 = CARTESIAN_POINT('',(-0.597914170384,0.11,7.019999998142E-02)); +#57011 = CARTESIAN_POINT('',(-0.597977059719,0.11,7.139999998143E-02)); +#57012 = CARTESIAN_POINT('',(-0.598008504386,0.11,7.199999997522E-02)); +#57013 = CARTESIAN_POINT('',(-0.598039949054,0.11,7.259999998144E-02)); +#57014 = CARTESIAN_POINT('',(-0.598102838389,0.11,7.379999998145E-02)); +#57015 = CARTESIAN_POINT('',(-0.598134283056,0.11,7.439999997525E-02)); +#57016 = CARTESIAN_POINT('',(-0.598165727724,0.11,7.499999998146E-02)); +#57017 = CARTESIAN_POINT('',(-0.598228617059,0.11,7.619999998147E-02)); +#57018 = CARTESIAN_POINT('',(-0.598260061727,0.11,7.679999997527E-02)); +#57019 = CARTESIAN_POINT('',(-0.598291506394,0.11,7.739999998148E-02)); +#57020 = CARTESIAN_POINT('',(-0.59835439573,0.11,7.859999998149E-02)); +#57021 = CARTESIAN_POINT('',(-0.598385840397,0.11,7.919999997529E-02)); +#57022 = CARTESIAN_POINT('',(-0.598417285065,0.11,7.97999999815E-02)); +#57023 = CARTESIAN_POINT('',(-0.5984801744,0.11,8.099999998151E-02)); +#57024 = CARTESIAN_POINT('',(-0.598511619067,0.11,8.159999997532E-02)); +#57025 = CARTESIAN_POINT('',(-0.598543063735,0.11,8.219999998151E-02)); +#57026 = CARTESIAN_POINT('',(-0.59860595307,0.11,8.339999998153E-02)); +#57027 = CARTESIAN_POINT('',(-0.598637397737,0.11,8.399999997534E-02)); +#57028 = CARTESIAN_POINT('',(-0.598668842405,0.11,8.459999998153E-02)); +#57029 = CARTESIAN_POINT('',(-0.59873173174,0.11,8.579999998155E-02)); +#57030 = CARTESIAN_POINT('',(-0.598763176408,0.11,8.639999997537E-02)); +#57031 = CARTESIAN_POINT('',(-0.598794621076,0.11,8.699999998155E-02)); +#57032 = CARTESIAN_POINT('',(-0.598857510411,0.11,8.819999998156E-02)); +#57033 = CARTESIAN_POINT('',(-0.598888955078,0.11,8.879999997539E-02)); +#57034 = CARTESIAN_POINT('',(-0.598920399746,0.11,8.939999998157E-02)); +#57035 = CARTESIAN_POINT('',(-0.598983289081,0.11,9.059999998158E-02)); +#57036 = CARTESIAN_POINT('',(-0.599014733748,0.11,9.119999997541E-02)); +#57037 = CARTESIAN_POINT('',(-0.599046178416,0.11,9.179999998159E-02)); +#57038 = CARTESIAN_POINT('',(-0.599109067751,0.11,9.29999999816E-02)); +#57039 = CARTESIAN_POINT('',(-0.599140512418,0.11,9.359999997544E-02)); +#57040 = CARTESIAN_POINT('',(-0.599171957086,0.11,9.419999998161E-02)); +#57041 = CARTESIAN_POINT('',(-0.599234846422,0.11,9.539999998162E-02)); +#57042 = CARTESIAN_POINT('',(-0.599266291089,0.11,9.599999997546E-02)); +#57043 = CARTESIAN_POINT('',(-0.599297735757,0.11,9.659999998163E-02)); +#57044 = CARTESIAN_POINT('',(-0.599360625092,0.11,9.779999998164E-02)); +#57045 = CARTESIAN_POINT('',(-0.599392069759,0.11,9.839999997548E-02)); +#57046 = CARTESIAN_POINT('',(-0.599423514427,0.11,9.899999998165E-02)); +#57047 = CARTESIAN_POINT('',(-0.599486403762,0.11,0.100199999982)); +#57048 = CARTESIAN_POINT('',(-0.599517848429,0.11,0.100799999976)); +#57049 = CARTESIAN_POINT('',(-0.599549293097,0.11,0.101399999982)); +#57050 = CARTESIAN_POINT('',(-0.599612182432,0.11,0.102599999982)); +#57051 = CARTESIAN_POINT('',(-0.5996436271,0.11,0.103199999976)); +#57052 = CARTESIAN_POINT('',(-0.599675071767,0.11,0.103799999982)); +#57053 = CARTESIAN_POINT('',(-0.599737961103,0.11,0.104999999982)); +#57054 = CARTESIAN_POINT('',(-0.59976940577,0.11,0.105599999976)); +#57055 = CARTESIAN_POINT('',(-0.599800850438,0.11,0.106199999982)); +#57056 = CARTESIAN_POINT('',(-0.599874221328,0.11,0.107599999967)); +#57057 = CARTESIAN_POINT('',(-0.599916147551,0.11,0.108399999956)); +#57058 = CARTESIAN_POINT('',(-0.599958073775,0.11,0.109199999967)); +#57059 = CARTESIAN_POINT('',(-0.6,0.11,0.11)); +#57060 = ORIENTED_EDGE('',*,*,#57061,.F.); +#57061 = EDGE_CURVE('',#56849,#56956,#57062,.T.); +#57062 = LINE('',#57063,#57064); +#57063 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57064 = VECTOR('',#57065,1.); +#57065 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#57066 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57067,#57068) + ,(#57069,#57070 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57067 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#57068 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57069 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57070 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57071 = ADVANCED_FACE('',(#57072),#57097,.F.); +#57072 = FACE_BOUND('',#57073,.F.); +#57073 = EDGE_LOOP('',(#57074,#57082,#57090,#57096)); +#57074 = ORIENTED_EDGE('',*,*,#57075,.F.); +#57075 = EDGE_CURVE('',#57076,#56481,#57078,.T.); +#57076 = VERTEX_POINT('',#57077); +#57077 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57078 = LINE('',#57079,#57080); +#57079 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57080 = VECTOR('',#57081,1.); +#57081 = DIRECTION('',(0.,0.,1.)); +#57082 = ORIENTED_EDGE('',*,*,#57083,.T.); +#57083 = EDGE_CURVE('',#57076,#57084,#57086,.T.); +#57084 = VERTEX_POINT('',#57085); +#57085 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#57086 = LINE('',#57087,#57088); +#57087 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57088 = VECTOR('',#57089,1.); +#57089 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57090 = ORIENTED_EDGE('',*,*,#57091,.T.); +#57091 = EDGE_CURVE('',#57084,#56473,#57092,.T.); +#57092 = LINE('',#57093,#57094); +#57093 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#57094 = VECTOR('',#57095,1.); +#57095 = DIRECTION('',(0.,0.,1.)); +#57096 = ORIENTED_EDGE('',*,*,#56480,.F.); +#57097 = PLANE('',#57098); +#57098 = AXIS2_PLACEMENT_3D('',#57099,#57100,#57101); +#57099 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57100 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57101 = DIRECTION('',(0.,0.,1.)); +#57102 = ADVANCED_FACE('',(#57103),#57324,.T.); +#57103 = FACE_BOUND('',#57104,.T.); +#57104 = EDGE_LOOP('',(#57105,#57211,#57212,#57318)); +#57105 = ORIENTED_EDGE('',*,*,#57106,.F.); +#57106 = EDGE_CURVE('',#56473,#57107,#57109,.T.); +#57107 = VERTEX_POINT('',#57108); +#57108 = CARTESIAN_POINT('',(-0.6,-0.11,0.11)); +#57109 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57110,#57111,#57112,#57113, + #57114,#57115,#57116,#57117,#57118,#57119,#57120,#57121,#57122, + #57123,#57124,#57125,#57126,#57127,#57128,#57129,#57130,#57131, + #57132,#57133,#57134,#57135,#57136,#57137,#57138,#57139,#57140, + #57141,#57142,#57143,#57144,#57145,#57146,#57147,#57148,#57149, + #57150,#57151,#57152,#57153,#57154,#57155,#57156,#57157,#57158, + #57159,#57160,#57161,#57162,#57163,#57164,#57165,#57166,#57167, + #57168,#57169,#57170,#57171,#57172,#57173,#57174,#57175,#57176, + #57177,#57178,#57179,#57180,#57181,#57182,#57183,#57184,#57185, + #57186,#57187,#57188,#57189,#57190,#57191,#57192,#57193,#57194, + #57195,#57196,#57197,#57198,#57199,#57200,#57201,#57202,#57203, + #57204,#57205,#57206,#57207,#57208,#57209,#57210),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027796E-02,6.00000586676E-02,9.000008517042E-02, + 0.120000109788,0.150000132522,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256573, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248472,0.630000241265,0.6600002322,0.690000221277, + 0.720000208498,0.750000193865,0.780000177379,0.810000159041, + 0.840000138854,0.870000116818,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#57110 = CARTESIAN_POINT('',(-0.595807377657,-0.11,3.E-02)); +#57111 = CARTESIAN_POINT('',(-0.595838822324,-0.11,3.059999998111E-02)); +#57112 = CARTESIAN_POINT('',(-0.595870266991,-0.11,3.119999997481E-02)); +#57113 = CARTESIAN_POINT('',(-0.595901711659,-0.11,3.179999998111E-02)); +#57114 = CARTESIAN_POINT('',(-0.595964600994,-0.11,3.299999998113E-02)); +#57115 = CARTESIAN_POINT('',(-0.595996045661,-0.11,3.359999997484E-02)); +#57116 = CARTESIAN_POINT('',(-0.596027490329,-0.11,3.419999998113E-02)); +#57117 = CARTESIAN_POINT('',(-0.596090379664,-0.11,3.539999998115E-02)); +#57118 = CARTESIAN_POINT('',(-0.596121824332,-0.11,3.599999997486E-02)); +#57119 = CARTESIAN_POINT('',(-0.596153269,-0.11,3.659999998115E-02)); +#57120 = CARTESIAN_POINT('',(-0.596216158335,-0.11,3.779999998117E-02)); +#57121 = CARTESIAN_POINT('',(-0.596247603002,-0.11,3.839999997489E-02)); +#57122 = CARTESIAN_POINT('',(-0.59627904767,-0.11,3.899999998117E-02)); +#57123 = CARTESIAN_POINT('',(-0.596341937005,-0.11,4.019999998118E-02)); +#57124 = CARTESIAN_POINT('',(-0.596373381672,-0.11,4.079999997491E-02)); +#57125 = CARTESIAN_POINT('',(-0.59640482634,-0.11,4.139999998119E-02)); +#57126 = CARTESIAN_POINT('',(-0.596467715675,-0.11,4.25999999812E-02)); +#57127 = CARTESIAN_POINT('',(-0.596499160343,-0.11,4.319999997494E-02)); +#57128 = CARTESIAN_POINT('',(-0.59653060501,-0.11,4.379999998121E-02)); +#57129 = CARTESIAN_POINT('',(-0.596593494346,-0.11,4.499999998122E-02)); +#57130 = CARTESIAN_POINT('',(-0.596624939013,-0.11,4.559999997496E-02)); +#57131 = CARTESIAN_POINT('',(-0.596656383681,-0.11,4.619999998123E-02)); +#57132 = CARTESIAN_POINT('',(-0.596719273016,-0.11,4.739999998124E-02)); +#57133 = CARTESIAN_POINT('',(-0.596750717683,-0.11,4.799999997498E-02)); +#57134 = CARTESIAN_POINT('',(-0.596782162351,-0.11,4.859999998125E-02)); +#57135 = CARTESIAN_POINT('',(-0.596845051686,-0.11,4.979999998126E-02)); +#57136 = CARTESIAN_POINT('',(-0.596876496353,-0.11,5.039999997501E-02)); +#57137 = CARTESIAN_POINT('',(-0.596907941021,-0.11,5.099999998127E-02)); +#57138 = CARTESIAN_POINT('',(-0.596970830356,-0.11,5.219999998128E-02)); +#57139 = CARTESIAN_POINT('',(-0.597002275024,-0.11,5.279999997503E-02)); +#57140 = CARTESIAN_POINT('',(-0.597033719692,-0.11,5.339999998129E-02)); +#57141 = CARTESIAN_POINT('',(-0.597096609027,-0.11,5.45999999813E-02)); +#57142 = CARTESIAN_POINT('',(-0.597128053694,-0.11,5.519999997506E-02)); +#57143 = CARTESIAN_POINT('',(-0.597159498362,-0.11,5.579999998131E-02)); +#57144 = CARTESIAN_POINT('',(-0.597222387697,-0.11,5.699999998132E-02)); +#57145 = CARTESIAN_POINT('',(-0.597253832364,-0.11,5.759999997508E-02)); +#57146 = CARTESIAN_POINT('',(-0.597285277032,-0.11,5.819999998133E-02)); +#57147 = CARTESIAN_POINT('',(-0.597348166367,-0.11,5.939999998134E-02)); +#57148 = CARTESIAN_POINT('',(-0.597379611035,-0.11,5.99999999751E-02)); +#57149 = CARTESIAN_POINT('',(-0.597411055702,-0.11,6.059999998134E-02)); +#57150 = CARTESIAN_POINT('',(-0.597473945038,-0.11,6.179999998136E-02)); +#57151 = CARTESIAN_POINT('',(-0.597505389705,-0.11,6.239999997513E-02)); +#57152 = CARTESIAN_POINT('',(-0.597536834373,-0.11,6.299999998136E-02)); +#57153 = CARTESIAN_POINT('',(-0.597599723708,-0.11,6.419999998138E-02)); +#57154 = CARTESIAN_POINT('',(-0.597631168375,-0.11,6.479999997515E-02)); +#57155 = CARTESIAN_POINT('',(-0.597662613043,-0.11,6.539999998138E-02)); +#57156 = CARTESIAN_POINT('',(-0.597725502378,-0.11,6.659999998139E-02)); +#57157 = CARTESIAN_POINT('',(-0.597756947045,-0.11,6.719999997518E-02)); +#57158 = CARTESIAN_POINT('',(-0.597788391713,-0.11,6.77999999814E-02)); +#57159 = CARTESIAN_POINT('',(-0.597851281048,-0.11,6.899999998141E-02)); +#57160 = CARTESIAN_POINT('',(-0.597882725716,-0.11,6.95999999752E-02)); +#57161 = CARTESIAN_POINT('',(-0.597914170384,-0.11,7.019999998142E-02)); +#57162 = CARTESIAN_POINT('',(-0.597977059719,-0.11,7.139999998143E-02)); +#57163 = CARTESIAN_POINT('',(-0.598008504386,-0.11,7.199999997522E-02)); +#57164 = CARTESIAN_POINT('',(-0.598039949054,-0.11,7.259999998144E-02)); +#57165 = CARTESIAN_POINT('',(-0.598102838389,-0.11,7.379999998145E-02)); +#57166 = CARTESIAN_POINT('',(-0.598134283056,-0.11,7.439999997525E-02)); +#57167 = CARTESIAN_POINT('',(-0.598165727724,-0.11,7.499999998146E-02)); +#57168 = CARTESIAN_POINT('',(-0.598228617059,-0.11,7.619999998147E-02)); +#57169 = CARTESIAN_POINT('',(-0.598260061727,-0.11,7.679999997527E-02)); +#57170 = CARTESIAN_POINT('',(-0.598291506394,-0.11,7.739999998148E-02)); +#57171 = CARTESIAN_POINT('',(-0.59835439573,-0.11,7.859999998149E-02)); +#57172 = CARTESIAN_POINT('',(-0.598385840397,-0.11,7.919999997529E-02)); +#57173 = CARTESIAN_POINT('',(-0.598417285065,-0.11,7.97999999815E-02)); +#57174 = CARTESIAN_POINT('',(-0.5984801744,-0.11,8.099999998151E-02)); +#57175 = CARTESIAN_POINT('',(-0.598511619067,-0.11,8.159999997532E-02)); +#57176 = CARTESIAN_POINT('',(-0.598543063735,-0.11,8.219999998152E-02)); +#57177 = CARTESIAN_POINT('',(-0.59860595307,-0.11,8.339999998153E-02)); +#57178 = CARTESIAN_POINT('',(-0.598637397737,-0.11,8.399999997534E-02)); +#57179 = CARTESIAN_POINT('',(-0.598668842405,-0.11,8.459999998153E-02)); +#57180 = CARTESIAN_POINT('',(-0.59873173174,-0.11,8.579999998155E-02)); +#57181 = CARTESIAN_POINT('',(-0.598763176408,-0.11,8.639999997537E-02)); +#57182 = CARTESIAN_POINT('',(-0.598794621076,-0.11,8.699999998155E-02)); +#57183 = CARTESIAN_POINT('',(-0.598857510411,-0.11,8.819999998156E-02)); +#57184 = CARTESIAN_POINT('',(-0.598888955078,-0.11,8.879999997539E-02)); +#57185 = CARTESIAN_POINT('',(-0.598920399746,-0.11,8.939999998157E-02)); +#57186 = CARTESIAN_POINT('',(-0.598983289081,-0.11,9.059999998158E-02)); +#57187 = CARTESIAN_POINT('',(-0.599014733748,-0.11,9.119999997541E-02)); +#57188 = CARTESIAN_POINT('',(-0.599046178416,-0.11,9.179999998159E-02)); +#57189 = CARTESIAN_POINT('',(-0.599109067751,-0.11,9.29999999816E-02)); +#57190 = CARTESIAN_POINT('',(-0.599140512418,-0.11,9.359999997544E-02)); +#57191 = CARTESIAN_POINT('',(-0.599171957086,-0.11,9.419999998161E-02)); +#57192 = CARTESIAN_POINT('',(-0.599234846422,-0.11,9.539999998162E-02)); +#57193 = CARTESIAN_POINT('',(-0.599266291089,-0.11,9.599999997546E-02)); +#57194 = CARTESIAN_POINT('',(-0.599297735757,-0.11,9.659999998163E-02)); +#57195 = CARTESIAN_POINT('',(-0.599360625092,-0.11,9.779999998164E-02)); +#57196 = CARTESIAN_POINT('',(-0.599392069759,-0.11,9.839999997548E-02)); +#57197 = CARTESIAN_POINT('',(-0.599423514427,-0.11,9.899999998165E-02)); +#57198 = CARTESIAN_POINT('',(-0.599486403762,-0.11,0.100199999982)); +#57199 = CARTESIAN_POINT('',(-0.599517848429,-0.11,0.100799999976)); +#57200 = CARTESIAN_POINT('',(-0.599549293097,-0.11,0.101399999982)); +#57201 = CARTESIAN_POINT('',(-0.599612182432,-0.11,0.102599999982)); +#57202 = CARTESIAN_POINT('',(-0.5996436271,-0.11,0.103199999976)); +#57203 = CARTESIAN_POINT('',(-0.599675071767,-0.11,0.103799999982)); +#57204 = CARTESIAN_POINT('',(-0.599737961103,-0.11,0.104999999982)); +#57205 = CARTESIAN_POINT('',(-0.59976940577,-0.11,0.105599999976)); +#57206 = CARTESIAN_POINT('',(-0.599800850438,-0.11,0.106199999982)); +#57207 = CARTESIAN_POINT('',(-0.599874221328,-0.11,0.107599999967)); +#57208 = CARTESIAN_POINT('',(-0.599916147551,-0.11,0.108399999956)); +#57209 = CARTESIAN_POINT('',(-0.599958073775,-0.11,0.109199999967)); +#57210 = CARTESIAN_POINT('',(-0.6,-0.11,0.11)); +#57211 = ORIENTED_EDGE('',*,*,#56472,.T.); +#57212 = ORIENTED_EDGE('',*,*,#57213,.T.); +#57213 = EDGE_CURVE('',#56465,#57214,#57216,.T.); +#57214 = VERTEX_POINT('',#57215); +#57215 = CARTESIAN_POINT('',(-0.6,-0.39,0.11)); +#57216 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57217,#57218,#57219,#57220, + #57221,#57222,#57223,#57224,#57225,#57226,#57227,#57228,#57229, + #57230,#57231,#57232,#57233,#57234,#57235,#57236,#57237,#57238, + #57239,#57240,#57241,#57242,#57243,#57244,#57245,#57246,#57247, + #57248,#57249,#57250,#57251,#57252,#57253,#57254,#57255,#57256, + #57257,#57258,#57259,#57260,#57261,#57262,#57263,#57264,#57265, + #57266,#57267,#57268,#57269,#57270,#57271,#57272,#57273,#57274, + #57275,#57276,#57277,#57278,#57279,#57280,#57281,#57282,#57283, + #57284,#57285,#57286,#57287,#57288,#57289,#57290,#57291,#57292, + #57293,#57294,#57295,#57296,#57297,#57298,#57299,#57300,#57301, + #57302,#57303,#57304,#57305,#57306,#57307,#57308,#57309,#57310, + #57311,#57312,#57313,#57314,#57315,#57316,#57317),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000037299323E-02,6.000072272734E-02,9.000104922043E-02, + 0.120001352491,0.150001632556,0.180001889434,0.210002123143, + 0.240002333701,0.270002521127,0.300002685437,0.33000282665, + 0.360002944785,0.390003039857,0.420003111887,0.450003160891, + 0.480003186887,0.510003189893,0.540003169928,0.570003127008, + 0.600003061152,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.810001959429, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.96000048829,1.),.UNSPECIFIED.); +#57217 = CARTESIAN_POINT('',(-0.595807377657,-0.39,3.E-02)); +#57218 = CARTESIAN_POINT('',(-0.595838822313,-0.39,3.05999997673E-02)); +#57219 = CARTESIAN_POINT('',(-0.595870266976,-0.39,3.119999968979E-02)); +#57220 = CARTESIAN_POINT('',(-0.595901711648,-0.39,3.179999976739E-02)); +#57221 = CARTESIAN_POINT('',(-0.595964600983,-0.39,3.299999976754E-02)); +#57222 = CARTESIAN_POINT('',(-0.595996045647,-0.39,3.359999969008E-02)); +#57223 = CARTESIAN_POINT('',(-0.596027490318,-0.39,3.419999976763E-02)); +#57224 = CARTESIAN_POINT('',(-0.596090379653,-0.39,3.539999976777E-02)); +#57225 = CARTESIAN_POINT('',(-0.596121824317,-0.39,3.599999969038E-02)); +#57226 = CARTESIAN_POINT('',(-0.596153268988,-0.39,3.659999976786E-02)); +#57227 = CARTESIAN_POINT('',(-0.596216158324,-0.39,3.779999976801E-02)); +#57228 = CARTESIAN_POINT('',(-0.596247602987,-0.39,3.839999969067E-02)); +#57229 = CARTESIAN_POINT('',(-0.596279047659,-0.39,3.899999976809E-02)); +#57230 = CARTESIAN_POINT('',(-0.596341936994,-0.39,4.019999976824E-02)); +#57231 = CARTESIAN_POINT('',(-0.596373381657,-0.39,4.079999969097E-02)); +#57232 = CARTESIAN_POINT('',(-0.596404826329,-0.39,4.139999976833E-02)); +#57233 = CARTESIAN_POINT('',(-0.596467715664,-0.39,4.259999976848E-02)); +#57234 = CARTESIAN_POINT('',(-0.596499160328,-0.39,4.319999969126E-02)); +#57235 = CARTESIAN_POINT('',(-0.596530604999,-0.39,4.379999976856E-02)); +#57236 = CARTESIAN_POINT('',(-0.596593494334,-0.39,4.499999976871E-02)); +#57237 = CARTESIAN_POINT('',(-0.596624938998,-0.39,4.559999969155E-02)); +#57238 = CARTESIAN_POINT('',(-0.59665638367,-0.39,4.61999997688E-02)); +#57239 = CARTESIAN_POINT('',(-0.596719273005,-0.39,4.739999976894E-02)); +#57240 = CARTESIAN_POINT('',(-0.596750717668,-0.39,4.799999969185E-02)); +#57241 = CARTESIAN_POINT('',(-0.59678216234,-0.39,4.859999976903E-02)); +#57242 = CARTESIAN_POINT('',(-0.596845051675,-0.39,4.979999976918E-02)); +#57243 = CARTESIAN_POINT('',(-0.596876496339,-0.39,5.039999969214E-02)); +#57244 = CARTESIAN_POINT('',(-0.59690794101,-0.39,5.099999976926E-02)); +#57245 = CARTESIAN_POINT('',(-0.596970830345,-0.39,5.219999976941E-02)); +#57246 = CARTESIAN_POINT('',(-0.597002275009,-0.39,5.279999969243E-02)); +#57247 = CARTESIAN_POINT('',(-0.59703371968,-0.39,5.339999976949E-02)); +#57248 = CARTESIAN_POINT('',(-0.597096609016,-0.39,5.459999976964E-02)); +#57249 = CARTESIAN_POINT('',(-0.597128053679,-0.39,5.519999969272E-02)); +#57250 = CARTESIAN_POINT('',(-0.597159498351,-0.39,5.579999976973E-02)); +#57251 = CARTESIAN_POINT('',(-0.597222387686,-0.39,5.699999976987E-02)); +#57252 = CARTESIAN_POINT('',(-0.597253832349,-0.39,5.759999969302E-02)); +#57253 = CARTESIAN_POINT('',(-0.597285277021,-0.39,5.819999976996E-02)); +#57254 = CARTESIAN_POINT('',(-0.597348166356,-0.39,5.939999977011E-02)); +#57255 = CARTESIAN_POINT('',(-0.59737961102,-0.39,5.999999969331E-02)); +#57256 = CARTESIAN_POINT('',(-0.597411055691,-0.39,6.059999977019E-02)); +#57257 = CARTESIAN_POINT('',(-0.597473945027,-0.39,6.179999977034E-02)); +#57258 = CARTESIAN_POINT('',(-0.59750538969,-0.39,6.23999996936E-02)); +#57259 = CARTESIAN_POINT('',(-0.597536834362,-0.39,6.299999977042E-02)); +#57260 = CARTESIAN_POINT('',(-0.597599723697,-0.39,6.419999977057E-02)); +#57261 = CARTESIAN_POINT('',(-0.59763116836,-0.39,6.479999969389E-02)); +#57262 = CARTESIAN_POINT('',(-0.597662613032,-0.39,6.539999977066E-02)); +#57263 = CARTESIAN_POINT('',(-0.597725502367,-0.39,6.65999997708E-02)); +#57264 = CARTESIAN_POINT('',(-0.597756947031,-0.39,6.719999969418E-02)); +#57265 = CARTESIAN_POINT('',(-0.597788391702,-0.39,6.779999977089E-02)); +#57266 = CARTESIAN_POINT('',(-0.597851281037,-0.39,6.899999977103E-02)); +#57267 = CARTESIAN_POINT('',(-0.597882725701,-0.39,6.959999969447E-02)); +#57268 = CARTESIAN_POINT('',(-0.597914170373,-0.39,7.019999977112E-02)); +#57269 = CARTESIAN_POINT('',(-0.597977059708,-0.39,7.139999977126E-02)); +#57270 = CARTESIAN_POINT('',(-0.598008504371,-0.39,7.199999969476E-02)); +#57271 = CARTESIAN_POINT('',(-0.598039949043,-0.39,7.259999977135E-02)); +#57272 = CARTESIAN_POINT('',(-0.598102838378,-0.39,7.379999977149E-02)); +#57273 = CARTESIAN_POINT('',(-0.598134283042,-0.39,7.439999969505E-02)); +#57274 = CARTESIAN_POINT('',(-0.598165727713,-0.39,7.499999977158E-02)); +#57275 = CARTESIAN_POINT('',(-0.598228617048,-0.39,7.619999977173E-02)); +#57276 = CARTESIAN_POINT('',(-0.598260061712,-0.39,7.679999969534E-02)); +#57277 = CARTESIAN_POINT('',(-0.598291506383,-0.39,7.739999977181E-02)); +#57278 = CARTESIAN_POINT('',(-0.598354395719,-0.39,7.859999977196E-02)); +#57279 = CARTESIAN_POINT('',(-0.598385840382,-0.39,7.919999969563E-02)); +#57280 = CARTESIAN_POINT('',(-0.598417285054,-0.39,7.979999977204E-02)); +#57281 = CARTESIAN_POINT('',(-0.598480174389,-0.39,8.099999977219E-02)); +#57282 = CARTESIAN_POINT('',(-0.598511619052,-0.39,8.159999969592E-02)); +#57283 = CARTESIAN_POINT('',(-0.598543063724,-0.39,8.219999977227E-02)); +#57284 = CARTESIAN_POINT('',(-0.598605953059,-0.39,8.339999977242E-02)); +#57285 = CARTESIAN_POINT('',(-0.598637397723,-0.39,8.399999969621E-02)); +#57286 = CARTESIAN_POINT('',(-0.598668842394,-0.39,8.45999997725E-02)); +#57287 = CARTESIAN_POINT('',(-0.598731731729,-0.39,8.579999977265E-02)); +#57288 = CARTESIAN_POINT('',(-0.598763176393,-0.39,8.63999996965E-02)); +#57289 = CARTESIAN_POINT('',(-0.598794621065,-0.39,8.699999977273E-02)); +#57290 = CARTESIAN_POINT('',(-0.5988575104,-0.39,8.819999977288E-02)); +#57291 = CARTESIAN_POINT('',(-0.598888955063,-0.39,8.879999969679E-02)); +#57292 = CARTESIAN_POINT('',(-0.598920399735,-0.39,8.939999977296E-02)); +#57293 = CARTESIAN_POINT('',(-0.59898328907,-0.39,9.059999977311E-02)); +#57294 = CARTESIAN_POINT('',(-0.599014733734,-0.39,9.119999969708E-02)); +#57295 = CARTESIAN_POINT('',(-0.599046178405,-0.39,9.179999977319E-02)); +#57296 = CARTESIAN_POINT('',(-0.59910906774,-0.39,9.299999977334E-02)); +#57297 = CARTESIAN_POINT('',(-0.599140512404,-0.39,9.359999969736E-02)); +#57298 = CARTESIAN_POINT('',(-0.599171957075,-0.39,9.419999977342E-02)); +#57299 = CARTESIAN_POINT('',(-0.599234846411,-0.39,9.539999977356E-02)); +#57300 = CARTESIAN_POINT('',(-0.599266291074,-0.39,9.599999969765E-02)); +#57301 = CARTESIAN_POINT('',(-0.599297735746,-0.39,9.659999977365E-02)); +#57302 = CARTESIAN_POINT('',(-0.599360625081,-0.39,9.779999977379E-02)); +#57303 = CARTESIAN_POINT('',(-0.599392069744,-0.39,9.839999969794E-02)); +#57304 = CARTESIAN_POINT('',(-0.599423514416,-0.39,9.899999977388E-02)); +#57305 = CARTESIAN_POINT('',(-0.599486403751,-0.39,0.100199999774)); +#57306 = CARTESIAN_POINT('',(-0.599517848415,-0.39,0.100799999698)); +#57307 = CARTESIAN_POINT('',(-0.599549293086,-0.39,0.101399999774)); +#57308 = CARTESIAN_POINT('',(-0.599612182421,-0.39,0.102599999774)); +#57309 = CARTESIAN_POINT('',(-0.599643627085,-0.39,0.103199999699)); +#57310 = CARTESIAN_POINT('',(-0.599675071757,-0.39,0.103799999774)); +#57311 = CARTESIAN_POINT('',(-0.599737961092,-0.39,0.104999999774)); +#57312 = CARTESIAN_POINT('',(-0.599769405755,-0.39,0.105599999699)); +#57313 = CARTESIAN_POINT('',(-0.599800850427,-0.39,0.106199999775)); +#57314 = CARTESIAN_POINT('',(-0.599874221309,-0.39,0.107599999598)); +#57315 = CARTESIAN_POINT('',(-0.599916147525,-0.39,0.108399999463)); +#57316 = CARTESIAN_POINT('',(-0.599958073755,-0.39,0.109199999597)); +#57317 = CARTESIAN_POINT('',(-0.6,-0.39,0.11)); +#57318 = ORIENTED_EDGE('',*,*,#57319,.F.); +#57319 = EDGE_CURVE('',#57107,#57214,#57320,.T.); +#57320 = LINE('',#57321,#57322); +#57321 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57322 = VECTOR('',#57323,1.); +#57323 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#57324 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57325,#57326) + ,(#57327,#57328 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57325 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#57326 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57327 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57328 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57329 = ADVANCED_FACE('',(#57330),#57355,.F.); +#57330 = FACE_BOUND('',#57331,.F.); +#57331 = EDGE_LOOP('',(#57332,#57340,#57348,#57354)); +#57332 = ORIENTED_EDGE('',*,*,#57333,.F.); +#57333 = EDGE_CURVE('',#57334,#56417,#57336,.T.); +#57334 = VERTEX_POINT('',#57335); +#57335 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57336 = LINE('',#57337,#57338); +#57337 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57338 = VECTOR('',#57339,1.); +#57339 = DIRECTION('',(0.,0.,1.)); +#57340 = ORIENTED_EDGE('',*,*,#57341,.T.); +#57341 = EDGE_CURVE('',#57334,#57342,#57344,.T.); +#57342 = VERTEX_POINT('',#57343); +#57343 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57344 = LINE('',#57345,#57346); +#57345 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57346 = VECTOR('',#57347,1.); +#57347 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57348 = ORIENTED_EDGE('',*,*,#57349,.T.); +#57349 = EDGE_CURVE('',#57342,#56409,#57350,.T.); +#57350 = LINE('',#57351,#57352); +#57351 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57352 = VECTOR('',#57353,1.); +#57353 = DIRECTION('',(0.,0.,1.)); +#57354 = ORIENTED_EDGE('',*,*,#56416,.F.); +#57355 = PLANE('',#57356); +#57356 = AXIS2_PLACEMENT_3D('',#57357,#57358,#57359); +#57357 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57358 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57359 = DIRECTION('',(0.,-0.,1.)); +#57360 = ADVANCED_FACE('',(#57361),#57386,.F.); +#57361 = FACE_BOUND('',#57362,.F.); +#57362 = EDGE_LOOP('',(#57363,#57371,#57379,#57385)); +#57363 = ORIENTED_EDGE('',*,*,#57364,.F.); +#57364 = EDGE_CURVE('',#57365,#56465,#57367,.T.); +#57365 = VERTEX_POINT('',#57366); +#57366 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57367 = LINE('',#57368,#57369); +#57368 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57369 = VECTOR('',#57370,1.); +#57370 = DIRECTION('',(0.,0.,1.)); +#57371 = ORIENTED_EDGE('',*,*,#57372,.T.); +#57372 = EDGE_CURVE('',#57365,#57373,#57375,.T.); +#57373 = VERTEX_POINT('',#57374); +#57374 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#57375 = LINE('',#57376,#57377); +#57376 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57377 = VECTOR('',#57378,1.); +#57378 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57379 = ORIENTED_EDGE('',*,*,#57380,.T.); +#57380 = EDGE_CURVE('',#57373,#56457,#57381,.T.); +#57381 = LINE('',#57382,#57383); +#57382 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#57383 = VECTOR('',#57384,1.); +#57384 = DIRECTION('',(0.,0.,1.)); +#57385 = ORIENTED_EDGE('',*,*,#56464,.F.); +#57386 = PLANE('',#57387); +#57387 = AXIS2_PLACEMENT_3D('',#57388,#57389,#57390); +#57388 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57389 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57390 = DIRECTION('',(0.,0.,1.)); +#57391 = ADVANCED_FACE('',(#57392),#57613,.T.); +#57392 = FACE_BOUND('',#57393,.T.); +#57393 = EDGE_LOOP('',(#57394,#57500,#57501,#57607)); +#57394 = ORIENTED_EDGE('',*,*,#57395,.F.); +#57395 = EDGE_CURVE('',#56425,#57396,#57398,.T.); +#57396 = VERTEX_POINT('',#57397); +#57397 = CARTESIAN_POINT('',(0.6,-0.39,0.11)); +#57398 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57399,#57400,#57401,#57402, + #57403,#57404,#57405,#57406,#57407,#57408,#57409,#57410,#57411, + #57412,#57413,#57414,#57415,#57416,#57417,#57418,#57419,#57420, + #57421,#57422,#57423,#57424,#57425,#57426,#57427,#57428,#57429, + #57430,#57431,#57432,#57433,#57434,#57435,#57436,#57437,#57438, + #57439,#57440,#57441,#57442,#57443,#57444,#57445,#57446,#57447, + #57448,#57449,#57450,#57451,#57452,#57453,#57454,#57455,#57456, + #57457,#57458,#57459,#57460,#57461,#57462,#57463,#57464,#57465, + #57466,#57467,#57468,#57469,#57470,#57471,#57472,#57473,#57474, + #57475,#57476,#57477,#57478,#57479,#57480,#57481,#57482,#57483, + #57484,#57485,#57486,#57487,#57488,#57489,#57490,#57491,#57492, + #57493,#57494,#57495,#57496,#57497,#57498,#57499),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000037299321E-02,6.00007227273E-02,9.000104922037E-02, + 0.12000135249,0.150001632556,0.180001889434,0.210002123143, + 0.240002333701,0.270002521127,0.300002685437,0.33000282665, + 0.360002944784,0.390003039857,0.420003111887,0.45000316089, + 0.480003186887,0.510003189893,0.540003169928,0.570003127008, + 0.600003061152,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.810001959429, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.960000488289,1.),.UNSPECIFIED.); +#57399 = CARTESIAN_POINT('',(0.595807377657,-0.39,3.E-02)); +#57400 = CARTESIAN_POINT('',(0.595838822313,-0.39,3.059999976731E-02)); +#57401 = CARTESIAN_POINT('',(0.595870266976,-0.39,3.119999968979E-02)); +#57402 = CARTESIAN_POINT('',(0.595901711648,-0.39,3.179999976739E-02)); +#57403 = CARTESIAN_POINT('',(0.595964600983,-0.39,3.299999976754E-02)); +#57404 = CARTESIAN_POINT('',(0.595996045647,-0.39,3.359999969008E-02)); +#57405 = CARTESIAN_POINT('',(0.596027490318,-0.39,3.419999976763E-02)); +#57406 = CARTESIAN_POINT('',(0.596090379653,-0.39,3.539999976777E-02)); +#57407 = CARTESIAN_POINT('',(0.596121824317,-0.39,3.599999969038E-02)); +#57408 = CARTESIAN_POINT('',(0.596153268988,-0.39,3.659999976786E-02)); +#57409 = CARTESIAN_POINT('',(0.596216158324,-0.39,3.779999976801E-02)); +#57410 = CARTESIAN_POINT('',(0.596247602987,-0.39,3.839999969067E-02)); +#57411 = CARTESIAN_POINT('',(0.596279047659,-0.39,3.899999976809E-02)); +#57412 = CARTESIAN_POINT('',(0.596341936994,-0.39,4.019999976824E-02)); +#57413 = CARTESIAN_POINT('',(0.596373381657,-0.39,4.079999969097E-02)); +#57414 = CARTESIAN_POINT('',(0.596404826329,-0.39,4.139999976833E-02)); +#57415 = CARTESIAN_POINT('',(0.596467715664,-0.39,4.259999976848E-02)); +#57416 = CARTESIAN_POINT('',(0.596499160328,-0.39,4.319999969126E-02)); +#57417 = CARTESIAN_POINT('',(0.596530604999,-0.39,4.379999976856E-02)); +#57418 = CARTESIAN_POINT('',(0.596593494334,-0.39,4.499999976871E-02)); +#57419 = CARTESIAN_POINT('',(0.596624938998,-0.39,4.559999969155E-02)); +#57420 = CARTESIAN_POINT('',(0.59665638367,-0.39,4.61999997688E-02)); +#57421 = CARTESIAN_POINT('',(0.596719273005,-0.39,4.739999976894E-02)); +#57422 = CARTESIAN_POINT('',(0.596750717668,-0.39,4.799999969185E-02)); +#57423 = CARTESIAN_POINT('',(0.59678216234,-0.39,4.859999976903E-02)); +#57424 = CARTESIAN_POINT('',(0.596845051675,-0.39,4.979999976918E-02)); +#57425 = CARTESIAN_POINT('',(0.596876496339,-0.39,5.039999969214E-02)); +#57426 = CARTESIAN_POINT('',(0.59690794101,-0.39,5.099999976926E-02)); +#57427 = CARTESIAN_POINT('',(0.596970830345,-0.39,5.219999976941E-02)); +#57428 = CARTESIAN_POINT('',(0.597002275009,-0.39,5.279999969243E-02)); +#57429 = CARTESIAN_POINT('',(0.59703371968,-0.39,5.339999976949E-02)); +#57430 = CARTESIAN_POINT('',(0.597096609016,-0.39,5.459999976964E-02)); +#57431 = CARTESIAN_POINT('',(0.597128053679,-0.39,5.519999969272E-02)); +#57432 = CARTESIAN_POINT('',(0.597159498351,-0.39,5.579999976973E-02)); +#57433 = CARTESIAN_POINT('',(0.597222387686,-0.39,5.699999976987E-02)); +#57434 = CARTESIAN_POINT('',(0.597253832349,-0.39,5.759999969302E-02)); +#57435 = CARTESIAN_POINT('',(0.597285277021,-0.39,5.819999976996E-02)); +#57436 = CARTESIAN_POINT('',(0.597348166356,-0.39,5.939999977011E-02)); +#57437 = CARTESIAN_POINT('',(0.59737961102,-0.39,5.999999969331E-02)); +#57438 = CARTESIAN_POINT('',(0.597411055691,-0.39,6.059999977019E-02)); +#57439 = CARTESIAN_POINT('',(0.597473945027,-0.39,6.179999977034E-02)); +#57440 = CARTESIAN_POINT('',(0.59750538969,-0.39,6.23999996936E-02)); +#57441 = CARTESIAN_POINT('',(0.597536834362,-0.39,6.299999977042E-02)); +#57442 = CARTESIAN_POINT('',(0.597599723697,-0.39,6.419999977057E-02)); +#57443 = CARTESIAN_POINT('',(0.59763116836,-0.39,6.479999969389E-02)); +#57444 = CARTESIAN_POINT('',(0.597662613032,-0.39,6.539999977066E-02)); +#57445 = CARTESIAN_POINT('',(0.597725502367,-0.39,6.65999997708E-02)); +#57446 = CARTESIAN_POINT('',(0.597756947031,-0.39,6.719999969418E-02)); +#57447 = CARTESIAN_POINT('',(0.597788391702,-0.39,6.779999977089E-02)); +#57448 = CARTESIAN_POINT('',(0.597851281037,-0.39,6.899999977103E-02)); +#57449 = CARTESIAN_POINT('',(0.597882725701,-0.39,6.959999969447E-02)); +#57450 = CARTESIAN_POINT('',(0.597914170373,-0.39,7.019999977112E-02)); +#57451 = CARTESIAN_POINT('',(0.597977059708,-0.39,7.139999977126E-02)); +#57452 = CARTESIAN_POINT('',(0.598008504371,-0.39,7.199999969476E-02)); +#57453 = CARTESIAN_POINT('',(0.598039949043,-0.39,7.259999977135E-02)); +#57454 = CARTESIAN_POINT('',(0.598102838378,-0.39,7.379999977149E-02)); +#57455 = CARTESIAN_POINT('',(0.598134283042,-0.39,7.439999969505E-02)); +#57456 = CARTESIAN_POINT('',(0.598165727713,-0.39,7.499999977158E-02)); +#57457 = CARTESIAN_POINT('',(0.598228617048,-0.39,7.619999977173E-02)); +#57458 = CARTESIAN_POINT('',(0.598260061712,-0.39,7.679999969534E-02)); +#57459 = CARTESIAN_POINT('',(0.598291506383,-0.39,7.739999977181E-02)); +#57460 = CARTESIAN_POINT('',(0.598354395719,-0.39,7.859999977196E-02)); +#57461 = CARTESIAN_POINT('',(0.598385840382,-0.39,7.919999969563E-02)); +#57462 = CARTESIAN_POINT('',(0.598417285054,-0.39,7.979999977204E-02)); +#57463 = CARTESIAN_POINT('',(0.598480174389,-0.39,8.099999977219E-02)); +#57464 = CARTESIAN_POINT('',(0.598511619052,-0.39,8.159999969592E-02)); +#57465 = CARTESIAN_POINT('',(0.598543063724,-0.39,8.219999977227E-02)); +#57466 = CARTESIAN_POINT('',(0.598605953059,-0.39,8.339999977242E-02)); +#57467 = CARTESIAN_POINT('',(0.598637397723,-0.39,8.399999969621E-02)); +#57468 = CARTESIAN_POINT('',(0.598668842394,-0.39,8.45999997725E-02)); +#57469 = CARTESIAN_POINT('',(0.598731731729,-0.39,8.579999977265E-02)); +#57470 = CARTESIAN_POINT('',(0.598763176393,-0.39,8.63999996965E-02)); +#57471 = CARTESIAN_POINT('',(0.598794621065,-0.39,8.699999977273E-02)); +#57472 = CARTESIAN_POINT('',(0.5988575104,-0.39,8.819999977288E-02)); +#57473 = CARTESIAN_POINT('',(0.598888955063,-0.39,8.879999969679E-02)); +#57474 = CARTESIAN_POINT('',(0.598920399735,-0.39,8.939999977296E-02)); +#57475 = CARTESIAN_POINT('',(0.59898328907,-0.39,9.059999977311E-02)); +#57476 = CARTESIAN_POINT('',(0.599014733734,-0.39,9.119999969708E-02)); +#57477 = CARTESIAN_POINT('',(0.599046178405,-0.39,9.179999977319E-02)); +#57478 = CARTESIAN_POINT('',(0.59910906774,-0.39,9.299999977334E-02)); +#57479 = CARTESIAN_POINT('',(0.599140512404,-0.39,9.359999969737E-02)); +#57480 = CARTESIAN_POINT('',(0.599171957075,-0.39,9.419999977342E-02)); +#57481 = CARTESIAN_POINT('',(0.599234846411,-0.39,9.539999977356E-02)); +#57482 = CARTESIAN_POINT('',(0.599266291074,-0.39,9.599999969765E-02)); +#57483 = CARTESIAN_POINT('',(0.599297735746,-0.39,9.659999977365E-02)); +#57484 = CARTESIAN_POINT('',(0.599360625081,-0.39,9.779999977379E-02)); +#57485 = CARTESIAN_POINT('',(0.599392069744,-0.39,9.839999969794E-02)); +#57486 = CARTESIAN_POINT('',(0.599423514416,-0.39,9.899999977388E-02)); +#57487 = CARTESIAN_POINT('',(0.599486403751,-0.39,0.100199999774)); +#57488 = CARTESIAN_POINT('',(0.599517848415,-0.39,0.100799999698)); +#57489 = CARTESIAN_POINT('',(0.599549293086,-0.39,0.101399999774)); +#57490 = CARTESIAN_POINT('',(0.599612182421,-0.39,0.102599999774)); +#57491 = CARTESIAN_POINT('',(0.599643627085,-0.39,0.103199999699)); +#57492 = CARTESIAN_POINT('',(0.599675071757,-0.39,0.103799999774)); +#57493 = CARTESIAN_POINT('',(0.599737961092,-0.39,0.104999999774)); +#57494 = CARTESIAN_POINT('',(0.599769405755,-0.39,0.105599999699)); +#57495 = CARTESIAN_POINT('',(0.599800850427,-0.39,0.106199999775)); +#57496 = CARTESIAN_POINT('',(0.599874221309,-0.39,0.107599999598)); +#57497 = CARTESIAN_POINT('',(0.599916147525,-0.39,0.108399999463)); +#57498 = CARTESIAN_POINT('',(0.599958073755,-0.39,0.109199999597)); +#57499 = CARTESIAN_POINT('',(0.6,-0.39,0.11)); +#57500 = ORIENTED_EDGE('',*,*,#56424,.T.); +#57501 = ORIENTED_EDGE('',*,*,#57502,.T.); +#57502 = EDGE_CURVE('',#56417,#57503,#57505,.T.); +#57503 = VERTEX_POINT('',#57504); +#57504 = CARTESIAN_POINT('',(0.6,-0.11,0.11)); +#57505 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57506,#57507,#57508,#57509, + #57510,#57511,#57512,#57513,#57514,#57515,#57516,#57517,#57518, + #57519,#57520,#57521,#57522,#57523,#57524,#57525,#57526,#57527, + #57528,#57529,#57530,#57531,#57532,#57533,#57534,#57535,#57536, + #57537,#57538,#57539,#57540,#57541,#57542,#57543,#57544,#57545, + #57546,#57547,#57548,#57549,#57550,#57551,#57552,#57553,#57554, + #57555,#57556,#57557,#57558,#57559,#57560,#57561,#57562,#57563, + #57564,#57565,#57566,#57567,#57568,#57569,#57570,#57571,#57572, + #57573,#57574,#57575,#57576,#57577,#57578,#57579,#57580,#57581, + #57582,#57583,#57584,#57585,#57586,#57587,#57588,#57589,#57590, + #57591,#57592,#57593,#57594,#57595,#57596,#57597,#57598,#57599, + #57600,#57601,#57602,#57603,#57604,#57605,#57606),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027794E-02,6.000005866757E-02,9.000008517037E-02, + 0.120000109788,0.150000132521,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256572, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248471,0.630000241265,0.660000232199,0.690000221276, + 0.720000208498,0.750000193864,0.780000177378,0.810000159041, + 0.840000138853,0.870000116817,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#57506 = CARTESIAN_POINT('',(0.595807377657,-0.11,3.E-02)); +#57507 = CARTESIAN_POINT('',(0.595838822324,-0.11,3.059999998111E-02)); +#57508 = CARTESIAN_POINT('',(0.595870266991,-0.11,3.119999997481E-02)); +#57509 = CARTESIAN_POINT('',(0.595901711659,-0.11,3.179999998111E-02)); +#57510 = CARTESIAN_POINT('',(0.595964600994,-0.11,3.299999998113E-02)); +#57511 = CARTESIAN_POINT('',(0.595996045661,-0.11,3.359999997484E-02)); +#57512 = CARTESIAN_POINT('',(0.596027490329,-0.11,3.419999998113E-02)); +#57513 = CARTESIAN_POINT('',(0.596090379664,-0.11,3.539999998115E-02)); +#57514 = CARTESIAN_POINT('',(0.596121824332,-0.11,3.599999997486E-02)); +#57515 = CARTESIAN_POINT('',(0.596153269,-0.11,3.659999998115E-02)); +#57516 = CARTESIAN_POINT('',(0.596216158335,-0.11,3.779999998117E-02)); +#57517 = CARTESIAN_POINT('',(0.596247603002,-0.11,3.839999997489E-02)); +#57518 = CARTESIAN_POINT('',(0.59627904767,-0.11,3.899999998117E-02)); +#57519 = CARTESIAN_POINT('',(0.596341937005,-0.11,4.019999998118E-02)); +#57520 = CARTESIAN_POINT('',(0.596373381672,-0.11,4.079999997491E-02)); +#57521 = CARTESIAN_POINT('',(0.59640482634,-0.11,4.139999998119E-02)); +#57522 = CARTESIAN_POINT('',(0.596467715675,-0.11,4.25999999812E-02)); +#57523 = CARTESIAN_POINT('',(0.596499160343,-0.11,4.319999997494E-02)); +#57524 = CARTESIAN_POINT('',(0.59653060501,-0.11,4.379999998121E-02)); +#57525 = CARTESIAN_POINT('',(0.596593494346,-0.11,4.499999998122E-02)); +#57526 = CARTESIAN_POINT('',(0.596624939013,-0.11,4.559999997496E-02)); +#57527 = CARTESIAN_POINT('',(0.596656383681,-0.11,4.619999998123E-02)); +#57528 = CARTESIAN_POINT('',(0.596719273016,-0.11,4.739999998124E-02)); +#57529 = CARTESIAN_POINT('',(0.596750717683,-0.11,4.799999997498E-02)); +#57530 = CARTESIAN_POINT('',(0.596782162351,-0.11,4.859999998125E-02)); +#57531 = CARTESIAN_POINT('',(0.596845051686,-0.11,4.979999998126E-02)); +#57532 = CARTESIAN_POINT('',(0.596876496353,-0.11,5.039999997501E-02)); +#57533 = CARTESIAN_POINT('',(0.596907941021,-0.11,5.099999998127E-02)); +#57534 = CARTESIAN_POINT('',(0.596970830356,-0.11,5.219999998128E-02)); +#57535 = CARTESIAN_POINT('',(0.597002275024,-0.11,5.279999997503E-02)); +#57536 = CARTESIAN_POINT('',(0.597033719692,-0.11,5.339999998129E-02)); +#57537 = CARTESIAN_POINT('',(0.597096609027,-0.11,5.45999999813E-02)); +#57538 = CARTESIAN_POINT('',(0.597128053694,-0.11,5.519999997506E-02)); +#57539 = CARTESIAN_POINT('',(0.597159498362,-0.11,5.579999998131E-02)); +#57540 = CARTESIAN_POINT('',(0.597222387697,-0.11,5.699999998132E-02)); +#57541 = CARTESIAN_POINT('',(0.597253832364,-0.11,5.759999997508E-02)); +#57542 = CARTESIAN_POINT('',(0.597285277032,-0.11,5.819999998133E-02)); +#57543 = CARTESIAN_POINT('',(0.597348166367,-0.11,5.939999998134E-02)); +#57544 = CARTESIAN_POINT('',(0.597379611035,-0.11,5.99999999751E-02)); +#57545 = CARTESIAN_POINT('',(0.597411055702,-0.11,6.059999998134E-02)); +#57546 = CARTESIAN_POINT('',(0.597473945038,-0.11,6.179999998136E-02)); +#57547 = CARTESIAN_POINT('',(0.597505389705,-0.11,6.239999997513E-02)); +#57548 = CARTESIAN_POINT('',(0.597536834373,-0.11,6.299999998136E-02)); +#57549 = CARTESIAN_POINT('',(0.597599723708,-0.11,6.419999998138E-02)); +#57550 = CARTESIAN_POINT('',(0.597631168375,-0.11,6.479999997515E-02)); +#57551 = CARTESIAN_POINT('',(0.597662613043,-0.11,6.539999998138E-02)); +#57552 = CARTESIAN_POINT('',(0.597725502378,-0.11,6.659999998139E-02)); +#57553 = CARTESIAN_POINT('',(0.597756947045,-0.11,6.719999997518E-02)); +#57554 = CARTESIAN_POINT('',(0.597788391713,-0.11,6.77999999814E-02)); +#57555 = CARTESIAN_POINT('',(0.597851281048,-0.11,6.899999998141E-02)); +#57556 = CARTESIAN_POINT('',(0.597882725716,-0.11,6.95999999752E-02)); +#57557 = CARTESIAN_POINT('',(0.597914170384,-0.11,7.019999998142E-02)); +#57558 = CARTESIAN_POINT('',(0.597977059719,-0.11,7.139999998143E-02)); +#57559 = CARTESIAN_POINT('',(0.598008504386,-0.11,7.199999997522E-02)); +#57560 = CARTESIAN_POINT('',(0.598039949054,-0.11,7.259999998144E-02)); +#57561 = CARTESIAN_POINT('',(0.598102838389,-0.11,7.379999998145E-02)); +#57562 = CARTESIAN_POINT('',(0.598134283056,-0.11,7.439999997525E-02)); +#57563 = CARTESIAN_POINT('',(0.598165727724,-0.11,7.499999998146E-02)); +#57564 = CARTESIAN_POINT('',(0.598228617059,-0.11,7.619999998147E-02)); +#57565 = CARTESIAN_POINT('',(0.598260061727,-0.11,7.679999997527E-02)); +#57566 = CARTESIAN_POINT('',(0.598291506394,-0.11,7.739999998148E-02)); +#57567 = CARTESIAN_POINT('',(0.59835439573,-0.11,7.859999998149E-02)); +#57568 = CARTESIAN_POINT('',(0.598385840397,-0.11,7.919999997529E-02)); +#57569 = CARTESIAN_POINT('',(0.598417285065,-0.11,7.97999999815E-02)); +#57570 = CARTESIAN_POINT('',(0.5984801744,-0.11,8.099999998151E-02)); +#57571 = CARTESIAN_POINT('',(0.598511619067,-0.11,8.159999997532E-02)); +#57572 = CARTESIAN_POINT('',(0.598543063735,-0.11,8.219999998151E-02)); +#57573 = CARTESIAN_POINT('',(0.59860595307,-0.11,8.339999998153E-02)); +#57574 = CARTESIAN_POINT('',(0.598637397737,-0.11,8.399999997534E-02)); +#57575 = CARTESIAN_POINT('',(0.598668842405,-0.11,8.459999998153E-02)); +#57576 = CARTESIAN_POINT('',(0.59873173174,-0.11,8.579999998155E-02)); +#57577 = CARTESIAN_POINT('',(0.598763176408,-0.11,8.639999997536E-02)); +#57578 = CARTESIAN_POINT('',(0.598794621076,-0.11,8.699999998155E-02)); +#57579 = CARTESIAN_POINT('',(0.598857510411,-0.11,8.819999998156E-02)); +#57580 = CARTESIAN_POINT('',(0.598888955078,-0.11,8.879999997539E-02)); +#57581 = CARTESIAN_POINT('',(0.598920399746,-0.11,8.939999998157E-02)); +#57582 = CARTESIAN_POINT('',(0.598983289081,-0.11,9.059999998158E-02)); +#57583 = CARTESIAN_POINT('',(0.599014733748,-0.11,9.119999997541E-02)); +#57584 = CARTESIAN_POINT('',(0.599046178416,-0.11,9.179999998159E-02)); +#57585 = CARTESIAN_POINT('',(0.599109067751,-0.11,9.29999999816E-02)); +#57586 = CARTESIAN_POINT('',(0.599140512418,-0.11,9.359999997544E-02)); +#57587 = CARTESIAN_POINT('',(0.599171957086,-0.11,9.419999998161E-02)); +#57588 = CARTESIAN_POINT('',(0.599234846422,-0.11,9.539999998162E-02)); +#57589 = CARTESIAN_POINT('',(0.599266291089,-0.11,9.599999997546E-02)); +#57590 = CARTESIAN_POINT('',(0.599297735757,-0.11,9.659999998163E-02)); +#57591 = CARTESIAN_POINT('',(0.599360625092,-0.11,9.779999998164E-02)); +#57592 = CARTESIAN_POINT('',(0.599392069759,-0.11,9.839999997548E-02)); +#57593 = CARTESIAN_POINT('',(0.599423514427,-0.11,9.899999998165E-02)); +#57594 = CARTESIAN_POINT('',(0.599486403762,-0.11,0.100199999982)); +#57595 = CARTESIAN_POINT('',(0.599517848429,-0.11,0.100799999976)); +#57596 = CARTESIAN_POINT('',(0.599549293097,-0.11,0.101399999982)); +#57597 = CARTESIAN_POINT('',(0.599612182432,-0.11,0.102599999982)); +#57598 = CARTESIAN_POINT('',(0.5996436271,-0.11,0.103199999976)); +#57599 = CARTESIAN_POINT('',(0.599675071767,-0.11,0.103799999982)); +#57600 = CARTESIAN_POINT('',(0.599737961103,-0.11,0.104999999982)); +#57601 = CARTESIAN_POINT('',(0.59976940577,-0.11,0.105599999976)); +#57602 = CARTESIAN_POINT('',(0.599800850438,-0.11,0.106199999982)); +#57603 = CARTESIAN_POINT('',(0.599874221328,-0.11,0.107599999967)); +#57604 = CARTESIAN_POINT('',(0.599916147551,-0.11,0.108399999956)); +#57605 = CARTESIAN_POINT('',(0.599958073775,-0.11,0.109199999967)); +#57606 = CARTESIAN_POINT('',(0.6,-0.11,0.11)); +#57607 = ORIENTED_EDGE('',*,*,#57608,.F.); +#57608 = EDGE_CURVE('',#57396,#57503,#57609,.T.); +#57609 = LINE('',#57610,#57611); +#57610 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57611 = VECTOR('',#57612,1.); +#57612 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57613 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57614,#57615) + ,(#57616,#57617 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57614 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57615 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57616 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#57617 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57618 = ADVANCED_FACE('',(#57619),#57741,.T.); +#57619 = FACE_BOUND('',#57620,.T.); +#57620 = EDGE_LOOP('',(#57621,#57727,#57728,#57735)); +#57621 = ORIENTED_EDGE('',*,*,#57622,.F.); +#57622 = EDGE_CURVE('',#56457,#57623,#57625,.T.); +#57623 = VERTEX_POINT('',#57624); +#57624 = CARTESIAN_POINT('',(-0.6,-0.61,0.11)); +#57625 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57626,#57627,#57628,#57629, + #57630,#57631,#57632,#57633,#57634,#57635,#57636,#57637,#57638, + #57639,#57640,#57641,#57642,#57643,#57644,#57645,#57646,#57647, + #57648,#57649,#57650,#57651,#57652,#57653,#57654,#57655,#57656, + #57657,#57658,#57659,#57660,#57661,#57662,#57663,#57664,#57665, + #57666,#57667,#57668,#57669,#57670,#57671,#57672,#57673,#57674, + #57675,#57676,#57677,#57678,#57679,#57680,#57681,#57682,#57683, + #57684,#57685,#57686,#57687,#57688,#57689,#57690,#57691,#57692, + #57693,#57694,#57695,#57696,#57697,#57698,#57699,#57700,#57701, + #57702,#57703,#57704,#57705,#57706,#57707,#57708,#57709,#57710, + #57711,#57712,#57713,#57714,#57715,#57716,#57717,#57718,#57719, + #57720,#57721,#57722,#57723,#57724,#57725,#57726),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527396E-02,6.000171535367E-02,9.000249028108E-02, + 0.120003210098,0.150003874847,0.180004484568,0.210005039305, + 0.240005539099,0.270005983992,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.42000738639,0.450007502748, + 0.480007564495,0.510007571674,0.540007524325,0.570007422489, + 0.600007266209,0.630007055525,0.660006790478,0.69000647111, + 0.720006097463,0.750005669576,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#57626 = CARTESIAN_POINT('',(-0.595807377657,-0.61,3.E-02)); +#57627 = CARTESIAN_POINT('',(-0.595838822296,-0.61,3.059999944783E-02)); +#57628 = CARTESIAN_POINT('',(-0.595870266954,-0.61,3.119999926389E-02)); +#57629 = CARTESIAN_POINT('',(-0.595901711631,-0.61,3.179999944803E-02)); +#57630 = CARTESIAN_POINT('',(-0.595964600966,-0.61,3.299999944838E-02)); +#57631 = CARTESIAN_POINT('',(-0.595996045624,-0.61,3.359999926458E-02)); +#57632 = CARTESIAN_POINT('',(-0.596027490301,-0.61,3.419999944858E-02)); +#57633 = CARTESIAN_POINT('',(-0.596090379637,-0.61,3.539999944893E-02)); +#57634 = CARTESIAN_POINT('',(-0.596121824295,-0.61,3.599999926526E-02)); +#57635 = CARTESIAN_POINT('',(-0.596153268972,-0.61,3.659999944913E-02)); +#57636 = CARTESIAN_POINT('',(-0.596216158307,-0.61,3.779999944948E-02)); +#57637 = CARTESIAN_POINT('',(-0.596247602965,-0.61,3.839999926595E-02)); +#57638 = CARTESIAN_POINT('',(-0.596279047642,-0.61,3.899999944968E-02)); +#57639 = CARTESIAN_POINT('',(-0.596341936977,-0.61,4.019999945003E-02)); +#57640 = CARTESIAN_POINT('',(-0.596373381635,-0.61,4.079999926664E-02)); +#57641 = CARTESIAN_POINT('',(-0.596404826312,-0.61,4.139999945023E-02)); +#57642 = CARTESIAN_POINT('',(-0.596467715648,-0.61,4.259999945058E-02)); +#57643 = CARTESIAN_POINT('',(-0.596499160305,-0.61,4.319999926733E-02)); +#57644 = CARTESIAN_POINT('',(-0.596530604983,-0.61,4.379999945078E-02)); +#57645 = CARTESIAN_POINT('',(-0.596593494318,-0.61,4.499999945112E-02)); +#57646 = CARTESIAN_POINT('',(-0.596624938976,-0.61,4.559999926801E-02)); +#57647 = CARTESIAN_POINT('',(-0.596656383653,-0.61,4.619999945133E-02)); +#57648 = CARTESIAN_POINT('',(-0.596719272988,-0.61,4.739999945167E-02)); +#57649 = CARTESIAN_POINT('',(-0.596750717646,-0.61,4.79999992687E-02)); +#57650 = CARTESIAN_POINT('',(-0.596782162323,-0.61,4.859999945188E-02)); +#57651 = CARTESIAN_POINT('',(-0.596845051658,-0.61,4.979999945222E-02)); +#57652 = CARTESIAN_POINT('',(-0.596876496316,-0.61,5.039999926939E-02)); +#57653 = CARTESIAN_POINT('',(-0.596907940994,-0.61,5.099999945242E-02)); +#57654 = CARTESIAN_POINT('',(-0.596970830329,-0.61,5.219999945277E-02)); +#57655 = CARTESIAN_POINT('',(-0.597002274987,-0.61,5.279999927007E-02)); +#57656 = CARTESIAN_POINT('',(-0.597033719664,-0.61,5.339999945297E-02)); +#57657 = CARTESIAN_POINT('',(-0.597096608999,-0.61,5.459999945331E-02)); +#57658 = CARTESIAN_POINT('',(-0.597128053657,-0.61,5.519999927076E-02)); +#57659 = CARTESIAN_POINT('',(-0.597159498334,-0.61,5.579999945351E-02)); +#57660 = CARTESIAN_POINT('',(-0.597222387669,-0.61,5.699999945386E-02)); +#57661 = CARTESIAN_POINT('',(-0.597253832327,-0.61,5.759999927144E-02)); +#57662 = CARTESIAN_POINT('',(-0.597285277005,-0.61,5.819999945406E-02)); +#57663 = CARTESIAN_POINT('',(-0.59734816634,-0.61,5.93999994544E-02)); +#57664 = CARTESIAN_POINT('',(-0.597379610998,-0.61,5.999999927213E-02)); +#57665 = CARTESIAN_POINT('',(-0.597411055675,-0.61,6.059999945461E-02)); +#57666 = CARTESIAN_POINT('',(-0.59747394501,-0.61,6.179999945495E-02)); +#57667 = CARTESIAN_POINT('',(-0.597505389668,-0.61,6.239999927281E-02)); +#57668 = CARTESIAN_POINT('',(-0.597536834345,-0.61,6.299999945515E-02)); +#57669 = CARTESIAN_POINT('',(-0.59759972368,-0.61,6.419999945549E-02)); +#57670 = CARTESIAN_POINT('',(-0.597631168338,-0.61,6.479999927349E-02)); +#57671 = CARTESIAN_POINT('',(-0.597662613015,-0.61,6.539999945569E-02)); +#57672 = CARTESIAN_POINT('',(-0.597725502351,-0.61,6.659999945604E-02)); +#57673 = CARTESIAN_POINT('',(-0.597756947009,-0.61,6.719999927417E-02)); +#57674 = CARTESIAN_POINT('',(-0.597788391686,-0.61,6.779999945624E-02)); +#57675 = CARTESIAN_POINT('',(-0.597851281021,-0.61,6.899999945658E-02)); +#57676 = CARTESIAN_POINT('',(-0.597882725679,-0.61,6.959999927485E-02)); +#57677 = CARTESIAN_POINT('',(-0.597914170356,-0.61,7.019999945678E-02)); +#57678 = CARTESIAN_POINT('',(-0.597977059691,-0.61,7.139999945712E-02)); +#57679 = CARTESIAN_POINT('',(-0.598008504349,-0.61,7.199999927553E-02)); +#57680 = CARTESIAN_POINT('',(-0.598039949026,-0.61,7.259999945732E-02)); +#57681 = CARTESIAN_POINT('',(-0.598102838362,-0.61,7.379999945766E-02)); +#57682 = CARTESIAN_POINT('',(-0.59813428302,-0.61,7.439999927621E-02)); +#57683 = CARTESIAN_POINT('',(-0.598165727697,-0.61,7.499999945787E-02)); +#57684 = CARTESIAN_POINT('',(-0.598228617032,-0.61,7.619999945821E-02)); +#57685 = CARTESIAN_POINT('',(-0.59826006169,-0.61,7.679999927689E-02)); +#57686 = CARTESIAN_POINT('',(-0.598291506367,-0.61,7.739999945841E-02)); +#57687 = CARTESIAN_POINT('',(-0.598354395702,-0.61,7.859999945875E-02)); +#57688 = CARTESIAN_POINT('',(-0.59838584036,-0.61,7.919999927757E-02)); +#57689 = CARTESIAN_POINT('',(-0.598417285037,-0.61,7.979999945895E-02)); +#57690 = CARTESIAN_POINT('',(-0.598480174372,-0.61,8.099999945929E-02)); +#57691 = CARTESIAN_POINT('',(-0.598511619031,-0.61,8.159999927825E-02)); +#57692 = CARTESIAN_POINT('',(-0.598543063708,-0.61,8.219999945949E-02)); +#57693 = CARTESIAN_POINT('',(-0.598605953043,-0.61,8.339999945983E-02)); +#57694 = CARTESIAN_POINT('',(-0.598637397701,-0.61,8.399999927893E-02)); +#57695 = CARTESIAN_POINT('',(-0.598668842378,-0.61,8.459999946003E-02)); +#57696 = CARTESIAN_POINT('',(-0.598731731713,-0.61,8.579999946037E-02)); +#57697 = CARTESIAN_POINT('',(-0.598763176371,-0.61,8.63999992796E-02)); +#57698 = CARTESIAN_POINT('',(-0.598794621048,-0.61,8.699999946057E-02)); +#57699 = CARTESIAN_POINT('',(-0.598857510383,-0.61,8.819999946091E-02)); +#57700 = CARTESIAN_POINT('',(-0.598888955041,-0.61,8.879999928028E-02)); +#57701 = CARTESIAN_POINT('',(-0.598920399719,-0.61,8.939999946111E-02)); +#57702 = CARTESIAN_POINT('',(-0.598983289054,-0.61,9.059999946145E-02)); +#57703 = CARTESIAN_POINT('',(-0.599014733712,-0.61,9.119999928096E-02)); +#57704 = CARTESIAN_POINT('',(-0.599046178389,-0.61,9.179999946165E-02)); +#57705 = CARTESIAN_POINT('',(-0.599109067724,-0.61,9.299999946199E-02)); +#57706 = CARTESIAN_POINT('',(-0.599140512382,-0.61,9.359999928163E-02)); +#57707 = CARTESIAN_POINT('',(-0.599171957059,-0.61,9.419999946219E-02)); +#57708 = CARTESIAN_POINT('',(-0.599234846394,-0.61,9.539999946253E-02)); +#57709 = CARTESIAN_POINT('',(-0.599266291052,-0.61,9.599999928231E-02)); +#57710 = CARTESIAN_POINT('',(-0.599297735729,-0.61,9.659999946273E-02)); +#57711 = CARTESIAN_POINT('',(-0.599360625065,-0.61,9.779999946306E-02)); +#57712 = CARTESIAN_POINT('',(-0.599392069723,-0.61,9.839999928298E-02)); +#57713 = CARTESIAN_POINT('',(-0.5994235144,-0.61,9.899999946326E-02)); +#57714 = CARTESIAN_POINT('',(-0.599486403735,-0.61,0.100199999464)); +#57715 = CARTESIAN_POINT('',(-0.599517848393,-0.61,0.100799999284)); +#57716 = CARTESIAN_POINT('',(-0.59954929307,-0.61,0.101399999464)); +#57717 = CARTESIAN_POINT('',(-0.599612182405,-0.61,0.102599999464)); +#57718 = CARTESIAN_POINT('',(-0.599643627063,-0.61,0.103199999284)); +#57719 = CARTESIAN_POINT('',(-0.59967507174,-0.61,0.103799999464)); +#57720 = CARTESIAN_POINT('',(-0.599737961076,-0.61,0.104999999465)); +#57721 = CARTESIAN_POINT('',(-0.599769405734,-0.61,0.105599999285)); +#57722 = CARTESIAN_POINT('',(-0.599800850411,-0.61,0.106199999465)); +#57723 = CARTESIAN_POINT('',(-0.59987422128,-0.61,0.107599999045)); +#57724 = CARTESIAN_POINT('',(-0.599916147486,-0.61,0.108399998725)); +#57725 = CARTESIAN_POINT('',(-0.599958073726,-0.61,0.109199999043)); +#57726 = CARTESIAN_POINT('',(-0.6,-0.61,0.11)); +#57727 = ORIENTED_EDGE('',*,*,#56456,.T.); +#57728 = ORIENTED_EDGE('',*,*,#57729,.T.); +#57729 = EDGE_CURVE('',#56449,#57730,#57732,.T.); +#57730 = VERTEX_POINT('',#57731); +#57731 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57732 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57733,#57734),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57733 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57734 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57735 = ORIENTED_EDGE('',*,*,#57736,.F.); +#57736 = EDGE_CURVE('',#57623,#57730,#57737,.T.); +#57737 = LINE('',#57738,#57739); +#57738 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57739 = VECTOR('',#57740,1.); +#57740 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#57741 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57742,#57743) + ,(#57744,#57745 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57742 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#57743 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57744 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57745 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57746 = ADVANCED_FACE('',(#57747),#57772,.F.); +#57747 = FACE_BOUND('',#57748,.F.); +#57748 = EDGE_LOOP('',(#57749,#57757,#57765,#57771)); +#57749 = ORIENTED_EDGE('',*,*,#57750,.F.); +#57750 = EDGE_CURVE('',#57751,#56433,#57753,.T.); +#57751 = VERTEX_POINT('',#57752); +#57752 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57753 = LINE('',#57754,#57755); +#57754 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57755 = VECTOR('',#57756,1.); +#57756 = DIRECTION('',(0.,0.,1.)); +#57757 = ORIENTED_EDGE('',*,*,#57758,.T.); +#57758 = EDGE_CURVE('',#57751,#57759,#57761,.T.); +#57759 = VERTEX_POINT('',#57760); +#57760 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#57761 = LINE('',#57762,#57763); +#57762 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57763 = VECTOR('',#57764,1.); +#57764 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57765 = ORIENTED_EDGE('',*,*,#57766,.T.); +#57766 = EDGE_CURVE('',#57759,#56425,#57767,.T.); +#57767 = LINE('',#57768,#57769); +#57768 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#57769 = VECTOR('',#57770,1.); +#57770 = DIRECTION('',(0.,0.,1.)); +#57771 = ORIENTED_EDGE('',*,*,#56432,.F.); +#57772 = PLANE('',#57773); +#57773 = AXIS2_PLACEMENT_3D('',#57774,#57775,#57776); +#57774 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57775 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57776 = DIRECTION('',(0.,-0.,1.)); +#57777 = ADVANCED_FACE('',(#57778),#57795,.T.); +#57778 = FACE_BOUND('',#57779,.T.); +#57779 = EDGE_LOOP('',(#57780,#57781,#57788,#57794)); +#57780 = ORIENTED_EDGE('',*,*,#56448,.T.); +#57781 = ORIENTED_EDGE('',*,*,#57782,.T.); +#57782 = EDGE_CURVE('',#56441,#57783,#57785,.T.); +#57783 = VERTEX_POINT('',#57784); +#57784 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57785 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57786,#57787),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57786 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57787 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57788 = ORIENTED_EDGE('',*,*,#57789,.F.); +#57789 = EDGE_CURVE('',#57730,#57783,#57790,.T.); +#57790 = LINE('',#57791,#57792); +#57791 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57792 = VECTOR('',#57793,1.); +#57793 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#57794 = ORIENTED_EDGE('',*,*,#57729,.F.); +#57795 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57796,#57797) + ,(#57798,#57799 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57796 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57797 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57798 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57799 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57800 = ADVANCED_FACE('',(#57801),#57917,.T.); +#57801 = FACE_BOUND('',#57802,.T.); +#57802 = EDGE_LOOP('',(#57803,#57804,#57805,#57911)); +#57803 = ORIENTED_EDGE('',*,*,#57782,.F.); +#57804 = ORIENTED_EDGE('',*,*,#56440,.T.); +#57805 = ORIENTED_EDGE('',*,*,#57806,.T.); +#57806 = EDGE_CURVE('',#56433,#57807,#57809,.T.); +#57807 = VERTEX_POINT('',#57808); +#57808 = CARTESIAN_POINT('',(0.6,-0.61,0.11)); +#57809 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57810,#57811,#57812,#57813, + #57814,#57815,#57816,#57817,#57818,#57819,#57820,#57821,#57822, + #57823,#57824,#57825,#57826,#57827,#57828,#57829,#57830,#57831, + #57832,#57833,#57834,#57835,#57836,#57837,#57838,#57839,#57840, + #57841,#57842,#57843,#57844,#57845,#57846,#57847,#57848,#57849, + #57850,#57851,#57852,#57853,#57854,#57855,#57856,#57857,#57858, + #57859,#57860,#57861,#57862,#57863,#57864,#57865,#57866,#57867, + #57868,#57869,#57870,#57871,#57872,#57873,#57874,#57875,#57876, + #57877,#57878,#57879,#57880,#57881,#57882,#57883,#57884,#57885, + #57886,#57887,#57888,#57889,#57890,#57891,#57892,#57893,#57894, + #57895,#57896,#57897,#57898,#57899,#57900,#57901,#57902,#57903, + #57904,#57905,#57906,#57907,#57908,#57909,#57910),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527394E-02,6.000171535362E-02,9.0002490281E-02, + 0.120003210098,0.150003874846,0.180004484568,0.210005039305, + 0.240005539099,0.270005983991,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.420007386389,0.450007502747, + 0.480007564495,0.510007571673,0.540007524324,0.570007422489, + 0.600007266208,0.630007055524,0.660006790478,0.69000647111, + 0.720006097462,0.750005669575,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#57810 = CARTESIAN_POINT('',(0.595807377657,-0.61,3.E-02)); +#57811 = CARTESIAN_POINT('',(0.595838822296,-0.61,3.059999944783E-02)); +#57812 = CARTESIAN_POINT('',(0.595870266954,-0.61,3.119999926388E-02)); +#57813 = CARTESIAN_POINT('',(0.595901711631,-0.61,3.179999944803E-02)); +#57814 = CARTESIAN_POINT('',(0.595964600966,-0.61,3.299999944838E-02)); +#57815 = CARTESIAN_POINT('',(0.595996045624,-0.61,3.359999926458E-02)); +#57816 = CARTESIAN_POINT('',(0.596027490301,-0.61,3.419999944858E-02)); +#57817 = CARTESIAN_POINT('',(0.596090379637,-0.61,3.539999944893E-02)); +#57818 = CARTESIAN_POINT('',(0.596121824295,-0.61,3.599999926526E-02)); +#57819 = CARTESIAN_POINT('',(0.596153268972,-0.61,3.659999944913E-02)); +#57820 = CARTESIAN_POINT('',(0.596216158307,-0.61,3.779999944948E-02)); +#57821 = CARTESIAN_POINT('',(0.596247602965,-0.61,3.839999926595E-02)); +#57822 = CARTESIAN_POINT('',(0.596279047642,-0.61,3.899999944968E-02)); +#57823 = CARTESIAN_POINT('',(0.596341936977,-0.61,4.019999945003E-02)); +#57824 = CARTESIAN_POINT('',(0.596373381635,-0.61,4.079999926664E-02)); +#57825 = CARTESIAN_POINT('',(0.596404826312,-0.61,4.139999945023E-02)); +#57826 = CARTESIAN_POINT('',(0.596467715648,-0.61,4.259999945058E-02)); +#57827 = CARTESIAN_POINT('',(0.596499160305,-0.61,4.319999926733E-02)); +#57828 = CARTESIAN_POINT('',(0.596530604983,-0.61,4.379999945078E-02)); +#57829 = CARTESIAN_POINT('',(0.596593494318,-0.61,4.499999945112E-02)); +#57830 = CARTESIAN_POINT('',(0.596624938976,-0.61,4.559999926801E-02)); +#57831 = CARTESIAN_POINT('',(0.596656383653,-0.61,4.619999945133E-02)); +#57832 = CARTESIAN_POINT('',(0.596719272988,-0.61,4.739999945167E-02)); +#57833 = CARTESIAN_POINT('',(0.596750717646,-0.61,4.79999992687E-02)); +#57834 = CARTESIAN_POINT('',(0.596782162323,-0.61,4.859999945188E-02)); +#57835 = CARTESIAN_POINT('',(0.596845051658,-0.61,4.979999945222E-02)); +#57836 = CARTESIAN_POINT('',(0.596876496316,-0.61,5.039999926939E-02)); +#57837 = CARTESIAN_POINT('',(0.596907940994,-0.61,5.099999945242E-02)); +#57838 = CARTESIAN_POINT('',(0.596970830329,-0.61,5.219999945277E-02)); +#57839 = CARTESIAN_POINT('',(0.597002274987,-0.61,5.279999927007E-02)); +#57840 = CARTESIAN_POINT('',(0.597033719664,-0.61,5.339999945297E-02)); +#57841 = CARTESIAN_POINT('',(0.597096608999,-0.61,5.459999945331E-02)); +#57842 = CARTESIAN_POINT('',(0.597128053657,-0.61,5.519999927076E-02)); +#57843 = CARTESIAN_POINT('',(0.597159498334,-0.61,5.579999945351E-02)); +#57844 = CARTESIAN_POINT('',(0.597222387669,-0.61,5.699999945386E-02)); +#57845 = CARTESIAN_POINT('',(0.597253832327,-0.61,5.759999927144E-02)); +#57846 = CARTESIAN_POINT('',(0.597285277005,-0.61,5.819999945406E-02)); +#57847 = CARTESIAN_POINT('',(0.59734816634,-0.61,5.93999994544E-02)); +#57848 = CARTESIAN_POINT('',(0.597379610998,-0.61,5.999999927213E-02)); +#57849 = CARTESIAN_POINT('',(0.597411055675,-0.61,6.059999945461E-02)); +#57850 = CARTESIAN_POINT('',(0.59747394501,-0.61,6.179999945495E-02)); +#57851 = CARTESIAN_POINT('',(0.597505389668,-0.61,6.239999927281E-02)); +#57852 = CARTESIAN_POINT('',(0.597536834345,-0.61,6.299999945515E-02)); +#57853 = CARTESIAN_POINT('',(0.59759972368,-0.61,6.419999945549E-02)); +#57854 = CARTESIAN_POINT('',(0.597631168338,-0.61,6.479999927349E-02)); +#57855 = CARTESIAN_POINT('',(0.597662613015,-0.61,6.539999945569E-02)); +#57856 = CARTESIAN_POINT('',(0.597725502351,-0.61,6.659999945604E-02)); +#57857 = CARTESIAN_POINT('',(0.597756947009,-0.61,6.719999927417E-02)); +#57858 = CARTESIAN_POINT('',(0.597788391686,-0.61,6.779999945624E-02)); +#57859 = CARTESIAN_POINT('',(0.597851281021,-0.61,6.899999945658E-02)); +#57860 = CARTESIAN_POINT('',(0.597882725679,-0.61,6.959999927485E-02)); +#57861 = CARTESIAN_POINT('',(0.597914170356,-0.61,7.019999945678E-02)); +#57862 = CARTESIAN_POINT('',(0.597977059691,-0.61,7.139999945712E-02)); +#57863 = CARTESIAN_POINT('',(0.598008504349,-0.61,7.199999927553E-02)); +#57864 = CARTESIAN_POINT('',(0.598039949026,-0.61,7.259999945732E-02)); +#57865 = CARTESIAN_POINT('',(0.598102838362,-0.61,7.379999945766E-02)); +#57866 = CARTESIAN_POINT('',(0.59813428302,-0.61,7.439999927621E-02)); +#57867 = CARTESIAN_POINT('',(0.598165727697,-0.61,7.499999945787E-02)); +#57868 = CARTESIAN_POINT('',(0.598228617032,-0.61,7.619999945821E-02)); +#57869 = CARTESIAN_POINT('',(0.59826006169,-0.61,7.679999927689E-02)); +#57870 = CARTESIAN_POINT('',(0.598291506367,-0.61,7.739999945841E-02)); +#57871 = CARTESIAN_POINT('',(0.598354395702,-0.61,7.859999945875E-02)); +#57872 = CARTESIAN_POINT('',(0.59838584036,-0.61,7.919999927757E-02)); +#57873 = CARTESIAN_POINT('',(0.598417285037,-0.61,7.979999945895E-02)); +#57874 = CARTESIAN_POINT('',(0.598480174372,-0.61,8.099999945929E-02)); +#57875 = CARTESIAN_POINT('',(0.598511619031,-0.61,8.159999927825E-02)); +#57876 = CARTESIAN_POINT('',(0.598543063708,-0.61,8.219999945949E-02)); +#57877 = CARTESIAN_POINT('',(0.598605953043,-0.61,8.339999945983E-02)); +#57878 = CARTESIAN_POINT('',(0.598637397701,-0.61,8.399999927893E-02)); +#57879 = CARTESIAN_POINT('',(0.598668842378,-0.61,8.459999946003E-02)); +#57880 = CARTESIAN_POINT('',(0.598731731713,-0.61,8.579999946037E-02)); +#57881 = CARTESIAN_POINT('',(0.598763176371,-0.61,8.63999992796E-02)); +#57882 = CARTESIAN_POINT('',(0.598794621048,-0.61,8.699999946057E-02)); +#57883 = CARTESIAN_POINT('',(0.598857510383,-0.61,8.819999946091E-02)); +#57884 = CARTESIAN_POINT('',(0.598888955041,-0.61,8.879999928028E-02)); +#57885 = CARTESIAN_POINT('',(0.598920399719,-0.61,8.939999946111E-02)); +#57886 = CARTESIAN_POINT('',(0.598983289054,-0.61,9.059999946145E-02)); +#57887 = CARTESIAN_POINT('',(0.599014733712,-0.61,9.119999928096E-02)); +#57888 = CARTESIAN_POINT('',(0.599046178389,-0.61,9.179999946165E-02)); +#57889 = CARTESIAN_POINT('',(0.599109067724,-0.61,9.299999946199E-02)); +#57890 = CARTESIAN_POINT('',(0.599140512382,-0.61,9.359999928163E-02)); +#57891 = CARTESIAN_POINT('',(0.599171957059,-0.61,9.419999946219E-02)); +#57892 = CARTESIAN_POINT('',(0.599234846394,-0.61,9.539999946253E-02)); +#57893 = CARTESIAN_POINT('',(0.599266291052,-0.61,9.599999928231E-02)); +#57894 = CARTESIAN_POINT('',(0.599297735729,-0.61,9.659999946273E-02)); +#57895 = CARTESIAN_POINT('',(0.599360625065,-0.61,9.779999946306E-02)); +#57896 = CARTESIAN_POINT('',(0.599392069723,-0.61,9.839999928298E-02)); +#57897 = CARTESIAN_POINT('',(0.5994235144,-0.61,9.899999946326E-02)); +#57898 = CARTESIAN_POINT('',(0.599486403735,-0.61,0.100199999464)); +#57899 = CARTESIAN_POINT('',(0.599517848393,-0.61,0.100799999284)); +#57900 = CARTESIAN_POINT('',(0.59954929307,-0.61,0.101399999464)); +#57901 = CARTESIAN_POINT('',(0.599612182405,-0.61,0.102599999464)); +#57902 = CARTESIAN_POINT('',(0.599643627063,-0.61,0.103199999284)); +#57903 = CARTESIAN_POINT('',(0.59967507174,-0.61,0.103799999464)); +#57904 = CARTESIAN_POINT('',(0.599737961076,-0.61,0.104999999465)); +#57905 = CARTESIAN_POINT('',(0.599769405734,-0.61,0.105599999285)); +#57906 = CARTESIAN_POINT('',(0.599800850411,-0.61,0.106199999465)); +#57907 = CARTESIAN_POINT('',(0.59987422128,-0.61,0.107599999045)); +#57908 = CARTESIAN_POINT('',(0.599916147486,-0.61,0.108399998725)); +#57909 = CARTESIAN_POINT('',(0.599958073726,-0.61,0.109199999043)); +#57910 = CARTESIAN_POINT('',(0.6,-0.61,0.11)); +#57911 = ORIENTED_EDGE('',*,*,#57912,.F.); +#57912 = EDGE_CURVE('',#57783,#57807,#57913,.T.); +#57913 = LINE('',#57914,#57915); +#57914 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57915 = VECTOR('',#57916,1.); +#57916 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57917 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57918,#57919) + ,(#57920,#57921 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57918 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57919 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57920 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#57921 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57922 = ADVANCED_FACE('',(#57923),#57962,.T.); +#57923 = FACE_BOUND('',#57924,.T.); +#57924 = EDGE_LOOP('',(#57925,#57926,#57932,#57933,#57939,#57940,#57941, + #57942,#57949,#57957)); +#57925 = ORIENTED_EDGE('',*,*,#57912,.T.); +#57926 = ORIENTED_EDGE('',*,*,#57927,.T.); +#57927 = EDGE_CURVE('',#57807,#57396,#57928,.T.); +#57928 = LINE('',#57929,#57930); +#57929 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57930 = VECTOR('',#57931,1.); +#57931 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57932 = ORIENTED_EDGE('',*,*,#57608,.T.); +#57933 = ORIENTED_EDGE('',*,*,#57934,.T.); +#57934 = EDGE_CURVE('',#57503,#56551,#57935,.T.); +#57935 = LINE('',#57936,#57937); +#57936 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57937 = VECTOR('',#57938,1.); +#57938 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57939 = ORIENTED_EDGE('',*,*,#56658,.T.); +#57940 = ORIENTED_EDGE('',*,*,#56510,.T.); +#57941 = ORIENTED_EDGE('',*,*,#56536,.T.); +#57942 = ORIENTED_EDGE('',*,*,#57943,.T.); +#57943 = EDGE_CURVE('',#56530,#57944,#57946,.T.); +#57944 = VERTEX_POINT('',#57945); +#57945 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#57946 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57947,#57948),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57947 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57948 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#57949 = ORIENTED_EDGE('',*,*,#57950,.F.); +#57950 = EDGE_CURVE('',#57951,#57944,#57953,.T.); +#57951 = VERTEX_POINT('',#57952); +#57952 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57953 = LINE('',#57954,#57955); +#57954 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57955 = VECTOR('',#57956,1.); +#57956 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57957 = ORIENTED_EDGE('',*,*,#57958,.F.); +#57958 = EDGE_CURVE('',#57783,#57951,#57959,.T.); +#57959 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57960,#57961),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57960 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57961 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57962 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57963,#57964) + ,(#57965,#57966 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57963 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57964 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57965 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57966 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#57967 = ADVANCED_FACE('',(#57968),#57994,.T.); +#57968 = FACE_BOUND('',#57969,.T.); +#57969 = EDGE_LOOP('',(#57970,#57980,#57986,#57987,#57988)); +#57970 = ORIENTED_EDGE('',*,*,#57971,.F.); +#57971 = EDGE_CURVE('',#57972,#57974,#57976,.T.); +#57972 = VERTEX_POINT('',#57973); +#57973 = CARTESIAN_POINT('',(0.8,0.11,0.)); +#57974 = VERTEX_POINT('',#57975); +#57975 = CARTESIAN_POINT('',(0.8,0.11,0.11)); +#57976 = LINE('',#57977,#57978); +#57977 = CARTESIAN_POINT('',(0.8,0.11,0.)); +#57978 = VECTOR('',#57979,1.); +#57979 = DIRECTION('',(0.,0.,1.)); +#57980 = ORIENTED_EDGE('',*,*,#57981,.F.); +#57981 = EDGE_CURVE('',#57342,#57972,#57982,.T.); +#57982 = LINE('',#57983,#57984); +#57983 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57984 = VECTOR('',#57985,1.); +#57985 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57986 = ORIENTED_EDGE('',*,*,#57349,.T.); +#57987 = ORIENTED_EDGE('',*,*,#56550,.T.); +#57988 = ORIENTED_EDGE('',*,*,#57989,.T.); +#57989 = EDGE_CURVE('',#56551,#57974,#57990,.T.); +#57990 = LINE('',#57991,#57992); +#57991 = CARTESIAN_POINT('',(0.595807377657,0.11,0.11)); +#57992 = VECTOR('',#57993,1.); +#57993 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57994 = PLANE('',#57995); +#57995 = AXIS2_PLACEMENT_3D('',#57996,#57997,#57998); +#57996 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57997 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57998 = DIRECTION('',(0.,0.,1.)); +#57999 = ADVANCED_FACE('',(#58000),#58044,.T.); +#58000 = FACE_BOUND('',#58001,.T.); +#58001 = EDGE_LOOP('',(#58002,#58003,#58009,#58010,#58016,#58017,#58023, + #58024,#58031,#58039)); +#58002 = ORIENTED_EDGE('',*,*,#56786,.T.); +#58003 = ORIENTED_EDGE('',*,*,#58004,.T.); +#58004 = EDGE_CURVE('',#56681,#56849,#58005,.T.); +#58005 = LINE('',#58006,#58007); +#58006 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58007 = VECTOR('',#58008,1.); +#58008 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58009 = ORIENTED_EDGE('',*,*,#57061,.T.); +#58010 = ORIENTED_EDGE('',*,*,#58011,.T.); +#58011 = EDGE_CURVE('',#56956,#57107,#58012,.T.); +#58012 = LINE('',#58013,#58014); +#58013 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58014 = VECTOR('',#58015,1.); +#58015 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58016 = ORIENTED_EDGE('',*,*,#57319,.T.); +#58017 = ORIENTED_EDGE('',*,*,#58018,.T.); +#58018 = EDGE_CURVE('',#57214,#57623,#58019,.T.); +#58019 = LINE('',#58020,#58021); +#58020 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58021 = VECTOR('',#58022,1.); +#58022 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58023 = ORIENTED_EDGE('',*,*,#57736,.T.); +#58024 = ORIENTED_EDGE('',*,*,#58025,.T.); +#58025 = EDGE_CURVE('',#57730,#58026,#58028,.T.); +#58026 = VERTEX_POINT('',#58027); +#58027 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58028 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58029,#58030),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58029 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#58030 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58031 = ORIENTED_EDGE('',*,*,#58032,.F.); +#58032 = EDGE_CURVE('',#58033,#58026,#58035,.T.); +#58033 = VERTEX_POINT('',#58034); +#58034 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58035 = LINE('',#58036,#58037); +#58036 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58037 = VECTOR('',#58038,1.); +#58038 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58039 = ORIENTED_EDGE('',*,*,#58040,.F.); +#58040 = EDGE_CURVE('',#56673,#58033,#58041,.T.); +#58041 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58042,#58043),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58042 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58043 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58044 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58045,#58046) + ,(#58047,#58048 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58045 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58046 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58047 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#58048 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58049 = ADVANCED_FACE('',(#58050),#58076,.F.); +#58050 = FACE_BOUND('',#58051,.F.); +#58051 = EDGE_LOOP('',(#58052,#58062,#58068,#58069,#58070)); +#58052 = ORIENTED_EDGE('',*,*,#58053,.F.); +#58053 = EDGE_CURVE('',#58054,#58056,#58058,.T.); +#58054 = VERTEX_POINT('',#58055); +#58055 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58056 = VERTEX_POINT('',#58057); +#58057 = CARTESIAN_POINT('',(-0.8,0.61,0.11)); +#58058 = LINE('',#58059,#58060); +#58059 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58060 = VECTOR('',#58061,1.); +#58061 = DIRECTION('',(0.,0.,1.)); +#58062 = ORIENTED_EDGE('',*,*,#58063,.F.); +#58063 = EDGE_CURVE('',#56818,#58054,#58064,.T.); +#58064 = LINE('',#58065,#58066); +#58065 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#58066 = VECTOR('',#58067,1.); +#58067 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58068 = ORIENTED_EDGE('',*,*,#56817,.T.); +#58069 = ORIENTED_EDGE('',*,*,#56680,.T.); +#58070 = ORIENTED_EDGE('',*,*,#58071,.T.); +#58071 = EDGE_CURVE('',#56681,#58056,#58072,.T.); +#58072 = LINE('',#58073,#58074); +#58073 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.11)); +#58074 = VECTOR('',#58075,1.); +#58075 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58076 = PLANE('',#58077); +#58077 = AXIS2_PLACEMENT_3D('',#58078,#58079,#58080); +#58078 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#58079 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58080 = DIRECTION('',(0.,0.,1.)); +#58081 = ADVANCED_FACE('',(#58082),#58093,.T.); +#58082 = FACE_BOUND('',#58083,.T.); +#58083 = EDGE_LOOP('',(#58084,#58085,#58086,#58092)); +#58084 = ORIENTED_EDGE('',*,*,#56802,.T.); +#58085 = ORIENTED_EDGE('',*,*,#58040,.T.); +#58086 = ORIENTED_EDGE('',*,*,#58087,.F.); +#58087 = EDGE_CURVE('',#57944,#58033,#58088,.T.); +#58088 = LINE('',#58089,#58090); +#58089 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#58090 = VECTOR('',#58091,1.); +#58091 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#58092 = ORIENTED_EDGE('',*,*,#57943,.F.); +#58093 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58094,#58095) + ,(#58096,#58097 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58094 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#58095 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#58096 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58097 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58098 = ADVANCED_FACE('',(#58099),#58125,.T.); +#58099 = FACE_BOUND('',#58100,.T.); +#58100 = EDGE_LOOP('',(#58101,#58111,#58117,#58118,#58119)); +#58101 = ORIENTED_EDGE('',*,*,#58102,.F.); +#58102 = EDGE_CURVE('',#58103,#58105,#58107,.T.); +#58103 = VERTEX_POINT('',#58104); +#58104 = CARTESIAN_POINT('',(-0.8,0.39,0.)); +#58105 = VERTEX_POINT('',#58106); +#58106 = CARTESIAN_POINT('',(-0.8,0.39,0.11)); +#58107 = LINE('',#58108,#58109); +#58108 = CARTESIAN_POINT('',(-0.8,0.39,0.)); +#58109 = VECTOR('',#58110,1.); +#58110 = DIRECTION('',(0.,0.,1.)); +#58111 = ORIENTED_EDGE('',*,*,#58112,.F.); +#58112 = EDGE_CURVE('',#56826,#58103,#58113,.T.); +#58113 = LINE('',#58114,#58115); +#58114 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#58115 = VECTOR('',#58116,1.); +#58116 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58117 = ORIENTED_EDGE('',*,*,#56833,.T.); +#58118 = ORIENTED_EDGE('',*,*,#56848,.T.); +#58119 = ORIENTED_EDGE('',*,*,#58120,.T.); +#58120 = EDGE_CURVE('',#56849,#58105,#58121,.T.); +#58121 = LINE('',#58122,#58123); +#58122 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.11)); +#58123 = VECTOR('',#58124,1.); +#58124 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58125 = PLANE('',#58126); +#58126 = AXIS2_PLACEMENT_3D('',#58127,#58128,#58129); +#58127 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#58128 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58129 = DIRECTION('',(0.,0.,1.)); +#58130 = ADVANCED_FACE('',(#58131),#58142,.F.); +#58131 = FACE_BOUND('',#58132,.F.); +#58132 = EDGE_LOOP('',(#58133,#58134,#58135,#58141)); +#58133 = ORIENTED_EDGE('',*,*,#56825,.F.); +#58134 = ORIENTED_EDGE('',*,*,#58063,.T.); +#58135 = ORIENTED_EDGE('',*,*,#58136,.T.); +#58136 = EDGE_CURVE('',#58054,#58103,#58137,.T.); +#58137 = LINE('',#58138,#58139); +#58138 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58139 = VECTOR('',#58140,1.); +#58140 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58141 = ORIENTED_EDGE('',*,*,#58112,.F.); +#58142 = PLANE('',#58143); +#58143 = AXIS2_PLACEMENT_3D('',#58144,#58145,#58146); +#58144 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#58145 = DIRECTION('',(0.,0.,1.)); +#58146 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58147 = ADVANCED_FACE('',(#58148),#58174,.F.); +#58148 = FACE_BOUND('',#58149,.F.); +#58149 = EDGE_LOOP('',(#58150,#58160,#58166,#58167,#58168)); +#58150 = ORIENTED_EDGE('',*,*,#58151,.F.); +#58151 = EDGE_CURVE('',#58152,#58154,#58156,.T.); +#58152 = VERTEX_POINT('',#58153); +#58153 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58154 = VERTEX_POINT('',#58155); +#58155 = CARTESIAN_POINT('',(-0.8,0.11,0.11)); +#58156 = LINE('',#58157,#58158); +#58157 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58158 = VECTOR('',#58159,1.); +#58159 = DIRECTION('',(0.,0.,1.)); +#58160 = ORIENTED_EDGE('',*,*,#58161,.F.); +#58161 = EDGE_CURVE('',#57076,#58152,#58162,.T.); +#58162 = LINE('',#58163,#58164); +#58163 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#58164 = VECTOR('',#58165,1.); +#58165 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58166 = ORIENTED_EDGE('',*,*,#57075,.T.); +#58167 = ORIENTED_EDGE('',*,*,#56955,.T.); +#58168 = ORIENTED_EDGE('',*,*,#58169,.T.); +#58169 = EDGE_CURVE('',#56956,#58154,#58170,.T.); +#58170 = LINE('',#58171,#58172); +#58171 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.11)); +#58172 = VECTOR('',#58173,1.); +#58173 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58174 = PLANE('',#58175); +#58175 = AXIS2_PLACEMENT_3D('',#58176,#58177,#58178); +#58176 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#58177 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58178 = DIRECTION('',(0.,0.,1.)); +#58179 = ADVANCED_FACE('',(#58180),#58206,.T.); +#58180 = FACE_BOUND('',#58181,.T.); +#58181 = EDGE_LOOP('',(#58182,#58192,#58198,#58199,#58200)); +#58182 = ORIENTED_EDGE('',*,*,#58183,.F.); +#58183 = EDGE_CURVE('',#58184,#58186,#58188,.T.); +#58184 = VERTEX_POINT('',#58185); +#58185 = CARTESIAN_POINT('',(-0.8,-0.11,0.)); +#58186 = VERTEX_POINT('',#58187); +#58187 = CARTESIAN_POINT('',(-0.8,-0.11,0.11)); +#58188 = LINE('',#58189,#58190); +#58189 = CARTESIAN_POINT('',(-0.8,-0.11,0.)); +#58190 = VECTOR('',#58191,1.); +#58191 = DIRECTION('',(0.,0.,1.)); +#58192 = ORIENTED_EDGE('',*,*,#58193,.F.); +#58193 = EDGE_CURVE('',#57084,#58184,#58194,.T.); +#58194 = LINE('',#58195,#58196); +#58195 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#58196 = VECTOR('',#58197,1.); +#58197 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58198 = ORIENTED_EDGE('',*,*,#57091,.T.); +#58199 = ORIENTED_EDGE('',*,*,#57106,.T.); +#58200 = ORIENTED_EDGE('',*,*,#58201,.T.); +#58201 = EDGE_CURVE('',#57107,#58186,#58202,.T.); +#58202 = LINE('',#58203,#58204); +#58203 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.11)); +#58204 = VECTOR('',#58205,1.); +#58205 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58206 = PLANE('',#58207); +#58207 = AXIS2_PLACEMENT_3D('',#58208,#58209,#58210); +#58208 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#58209 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58210 = DIRECTION('',(0.,0.,1.)); +#58211 = ADVANCED_FACE('',(#58212),#58223,.F.); +#58212 = FACE_BOUND('',#58213,.F.); +#58213 = EDGE_LOOP('',(#58214,#58215,#58216,#58222)); +#58214 = ORIENTED_EDGE('',*,*,#57083,.F.); +#58215 = ORIENTED_EDGE('',*,*,#58161,.T.); +#58216 = ORIENTED_EDGE('',*,*,#58217,.T.); +#58217 = EDGE_CURVE('',#58152,#58184,#58218,.T.); +#58218 = LINE('',#58219,#58220); +#58219 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58220 = VECTOR('',#58221,1.); +#58221 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58222 = ORIENTED_EDGE('',*,*,#58193,.F.); +#58223 = PLANE('',#58224); +#58224 = AXIS2_PLACEMENT_3D('',#58225,#58226,#58227); +#58225 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#58226 = DIRECTION('',(0.,0.,1.)); +#58227 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58228 = ADVANCED_FACE('',(#58229),#58255,.F.); +#58229 = FACE_BOUND('',#58230,.F.); +#58230 = EDGE_LOOP('',(#58231,#58241,#58247,#58248,#58249)); +#58231 = ORIENTED_EDGE('',*,*,#58232,.F.); +#58232 = EDGE_CURVE('',#58233,#58235,#58237,.T.); +#58233 = VERTEX_POINT('',#58234); +#58234 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58235 = VERTEX_POINT('',#58236); +#58236 = CARTESIAN_POINT('',(-0.8,-0.39,0.11)); +#58237 = LINE('',#58238,#58239); +#58238 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58239 = VECTOR('',#58240,1.); +#58240 = DIRECTION('',(0.,0.,1.)); +#58241 = ORIENTED_EDGE('',*,*,#58242,.F.); +#58242 = EDGE_CURVE('',#57365,#58233,#58243,.T.); +#58243 = LINE('',#58244,#58245); +#58244 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#58245 = VECTOR('',#58246,1.); +#58246 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58247 = ORIENTED_EDGE('',*,*,#57364,.T.); +#58248 = ORIENTED_EDGE('',*,*,#57213,.T.); +#58249 = ORIENTED_EDGE('',*,*,#58250,.T.); +#58250 = EDGE_CURVE('',#57214,#58235,#58251,.T.); +#58251 = LINE('',#58252,#58253); +#58252 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.11)); +#58253 = VECTOR('',#58254,1.); +#58254 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58255 = PLANE('',#58256); +#58256 = AXIS2_PLACEMENT_3D('',#58257,#58258,#58259); +#58257 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#58258 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58259 = DIRECTION('',(0.,0.,1.)); +#58260 = ADVANCED_FACE('',(#58261),#58287,.F.); +#58261 = FACE_BOUND('',#58262,.F.); +#58262 = EDGE_LOOP('',(#58263,#58273,#58279,#58280,#58281)); +#58263 = ORIENTED_EDGE('',*,*,#58264,.F.); +#58264 = EDGE_CURVE('',#58265,#58267,#58269,.T.); +#58265 = VERTEX_POINT('',#58266); +#58266 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58267 = VERTEX_POINT('',#58268); +#58268 = CARTESIAN_POINT('',(0.8,-0.11,0.11)); +#58269 = LINE('',#58270,#58271); +#58270 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58271 = VECTOR('',#58272,1.); +#58272 = DIRECTION('',(0.,0.,1.)); +#58273 = ORIENTED_EDGE('',*,*,#58274,.F.); +#58274 = EDGE_CURVE('',#57334,#58265,#58275,.T.); +#58275 = LINE('',#58276,#58277); +#58276 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#58277 = VECTOR('',#58278,1.); +#58278 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58279 = ORIENTED_EDGE('',*,*,#57333,.T.); +#58280 = ORIENTED_EDGE('',*,*,#57502,.T.); +#58281 = ORIENTED_EDGE('',*,*,#58282,.T.); +#58282 = EDGE_CURVE('',#57503,#58267,#58283,.T.); +#58283 = LINE('',#58284,#58285); +#58284 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.11)); +#58285 = VECTOR('',#58286,1.); +#58286 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58287 = PLANE('',#58288); +#58288 = AXIS2_PLACEMENT_3D('',#58289,#58290,#58291); +#58289 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#58290 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58291 = DIRECTION('',(0.,0.,1.)); +#58292 = ADVANCED_FACE('',(#58293),#58304,.F.); +#58293 = FACE_BOUND('',#58294,.F.); +#58294 = EDGE_LOOP('',(#58295,#58296,#58297,#58303)); +#58295 = ORIENTED_EDGE('',*,*,#57341,.F.); +#58296 = ORIENTED_EDGE('',*,*,#58274,.T.); +#58297 = ORIENTED_EDGE('',*,*,#58298,.T.); +#58298 = EDGE_CURVE('',#58265,#57972,#58299,.T.); +#58299 = LINE('',#58300,#58301); +#58300 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58301 = VECTOR('',#58302,1.); +#58302 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58303 = ORIENTED_EDGE('',*,*,#57981,.F.); +#58304 = PLANE('',#58305); +#58305 = AXIS2_PLACEMENT_3D('',#58306,#58307,#58308); +#58306 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#58307 = DIRECTION('',(0.,0.,1.)); +#58308 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58309 = ADVANCED_FACE('',(#58310),#58336,.T.); +#58310 = FACE_BOUND('',#58311,.T.); +#58311 = EDGE_LOOP('',(#58312,#58322,#58328,#58329,#58330)); +#58312 = ORIENTED_EDGE('',*,*,#58313,.F.); +#58313 = EDGE_CURVE('',#58314,#58316,#58318,.T.); +#58314 = VERTEX_POINT('',#58315); +#58315 = CARTESIAN_POINT('',(-0.8,-0.61,0.)); +#58316 = VERTEX_POINT('',#58317); +#58317 = CARTESIAN_POINT('',(-0.8,-0.61,0.11)); +#58318 = LINE('',#58319,#58320); +#58319 = CARTESIAN_POINT('',(-0.8,-0.61,0.)); +#58320 = VECTOR('',#58321,1.); +#58321 = DIRECTION('',(0.,0.,1.)); +#58322 = ORIENTED_EDGE('',*,*,#58323,.F.); +#58323 = EDGE_CURVE('',#57373,#58314,#58324,.T.); +#58324 = LINE('',#58325,#58326); +#58325 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#58326 = VECTOR('',#58327,1.); +#58327 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58328 = ORIENTED_EDGE('',*,*,#57380,.T.); +#58329 = ORIENTED_EDGE('',*,*,#57622,.T.); +#58330 = ORIENTED_EDGE('',*,*,#58331,.T.); +#58331 = EDGE_CURVE('',#57623,#58316,#58332,.T.); +#58332 = LINE('',#58333,#58334); +#58333 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.11)); +#58334 = VECTOR('',#58335,1.); +#58335 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58336 = PLANE('',#58337); +#58337 = AXIS2_PLACEMENT_3D('',#58338,#58339,#58340); +#58338 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#58339 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58340 = DIRECTION('',(0.,0.,1.)); +#58341 = ADVANCED_FACE('',(#58342),#58353,.F.); +#58342 = FACE_BOUND('',#58343,.F.); +#58343 = EDGE_LOOP('',(#58344,#58345,#58346,#58352)); +#58344 = ORIENTED_EDGE('',*,*,#57372,.F.); +#58345 = ORIENTED_EDGE('',*,*,#58242,.T.); +#58346 = ORIENTED_EDGE('',*,*,#58347,.T.); +#58347 = EDGE_CURVE('',#58233,#58314,#58348,.T.); +#58348 = LINE('',#58349,#58350); +#58349 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58350 = VECTOR('',#58351,1.); +#58351 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58352 = ORIENTED_EDGE('',*,*,#58323,.F.); +#58353 = PLANE('',#58354); +#58354 = AXIS2_PLACEMENT_3D('',#58355,#58356,#58357); +#58355 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#58356 = DIRECTION('',(0.,0.,1.)); +#58357 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58358 = ADVANCED_FACE('',(#58359),#58385,.T.); +#58359 = FACE_BOUND('',#58360,.T.); +#58360 = EDGE_LOOP('',(#58361,#58371,#58377,#58378,#58379)); +#58361 = ORIENTED_EDGE('',*,*,#58362,.F.); +#58362 = EDGE_CURVE('',#58363,#58365,#58367,.T.); +#58363 = VERTEX_POINT('',#58364); +#58364 = CARTESIAN_POINT('',(0.8,-0.39,0.)); +#58365 = VERTEX_POINT('',#58366); +#58366 = CARTESIAN_POINT('',(0.8,-0.39,0.11)); +#58367 = LINE('',#58368,#58369); +#58368 = CARTESIAN_POINT('',(0.8,-0.39,0.)); +#58369 = VECTOR('',#58370,1.); +#58370 = DIRECTION('',(0.,0.,1.)); +#58371 = ORIENTED_EDGE('',*,*,#58372,.F.); +#58372 = EDGE_CURVE('',#57759,#58363,#58373,.T.); +#58373 = LINE('',#58374,#58375); +#58374 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#58375 = VECTOR('',#58376,1.); +#58376 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58377 = ORIENTED_EDGE('',*,*,#57766,.T.); +#58378 = ORIENTED_EDGE('',*,*,#57395,.T.); +#58379 = ORIENTED_EDGE('',*,*,#58380,.T.); +#58380 = EDGE_CURVE('',#57396,#58365,#58381,.T.); +#58381 = LINE('',#58382,#58383); +#58382 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.11)); +#58383 = VECTOR('',#58384,1.); +#58384 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58385 = PLANE('',#58386); +#58386 = AXIS2_PLACEMENT_3D('',#58387,#58388,#58389); +#58387 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#58388 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58389 = DIRECTION('',(0.,0.,1.)); +#58390 = ADVANCED_FACE('',(#58391),#58417,.F.); +#58391 = FACE_BOUND('',#58392,.F.); +#58392 = EDGE_LOOP('',(#58393,#58403,#58409,#58410,#58411)); +#58393 = ORIENTED_EDGE('',*,*,#58394,.F.); +#58394 = EDGE_CURVE('',#58395,#58397,#58399,.T.); +#58395 = VERTEX_POINT('',#58396); +#58396 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58397 = VERTEX_POINT('',#58398); +#58398 = CARTESIAN_POINT('',(0.8,-0.61,0.11)); +#58399 = LINE('',#58400,#58401); +#58400 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58401 = VECTOR('',#58402,1.); +#58402 = DIRECTION('',(0.,0.,1.)); +#58403 = ORIENTED_EDGE('',*,*,#58404,.F.); +#58404 = EDGE_CURVE('',#57751,#58395,#58405,.T.); +#58405 = LINE('',#58406,#58407); +#58406 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#58407 = VECTOR('',#58408,1.); +#58408 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58409 = ORIENTED_EDGE('',*,*,#57750,.T.); +#58410 = ORIENTED_EDGE('',*,*,#57806,.T.); +#58411 = ORIENTED_EDGE('',*,*,#58412,.T.); +#58412 = EDGE_CURVE('',#57807,#58397,#58413,.T.); +#58413 = LINE('',#58414,#58415); +#58414 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.11)); +#58415 = VECTOR('',#58416,1.); +#58416 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58417 = PLANE('',#58418); +#58418 = AXIS2_PLACEMENT_3D('',#58419,#58420,#58421); +#58419 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#58420 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58421 = DIRECTION('',(0.,0.,1.)); +#58422 = ADVANCED_FACE('',(#58423),#58434,.F.); +#58423 = FACE_BOUND('',#58424,.F.); +#58424 = EDGE_LOOP('',(#58425,#58426,#58427,#58433)); +#58425 = ORIENTED_EDGE('',*,*,#57758,.F.); +#58426 = ORIENTED_EDGE('',*,*,#58404,.T.); +#58427 = ORIENTED_EDGE('',*,*,#58428,.T.); +#58428 = EDGE_CURVE('',#58395,#58363,#58429,.T.); +#58429 = LINE('',#58430,#58431); +#58430 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58431 = VECTOR('',#58432,1.); +#58432 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58433 = ORIENTED_EDGE('',*,*,#58372,.F.); +#58434 = PLANE('',#58435); +#58435 = AXIS2_PLACEMENT_3D('',#58436,#58437,#58438); +#58436 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#58437 = DIRECTION('',(0.,0.,1.)); +#58438 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58439 = ADVANCED_FACE('',(#58440),#58451,.T.); +#58440 = FACE_BOUND('',#58441,.T.); +#58441 = EDGE_LOOP('',(#58442,#58443,#58444,#58450)); +#58442 = ORIENTED_EDGE('',*,*,#57789,.T.); +#58443 = ORIENTED_EDGE('',*,*,#57958,.T.); +#58444 = ORIENTED_EDGE('',*,*,#58445,.F.); +#58445 = EDGE_CURVE('',#58026,#57951,#58446,.T.); +#58446 = LINE('',#58447,#58448); +#58447 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58448 = VECTOR('',#58449,1.); +#58449 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#58450 = ORIENTED_EDGE('',*,*,#58025,.F.); +#58451 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58452,#58453) + ,(#58454,#58455 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58452 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#58453 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58454 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#58455 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#58456 = ADVANCED_FACE('',(#58457),#58468,.T.); +#58457 = FACE_BOUND('',#58458,.T.); +#58458 = EDGE_LOOP('',(#58459,#58460,#58461,#58467)); +#58459 = ORIENTED_EDGE('',*,*,#57927,.F.); +#58460 = ORIENTED_EDGE('',*,*,#58412,.T.); +#58461 = ORIENTED_EDGE('',*,*,#58462,.T.); +#58462 = EDGE_CURVE('',#58397,#58365,#58463,.T.); +#58463 = LINE('',#58464,#58465); +#58464 = CARTESIAN_POINT('',(0.8,-0.61,0.11)); +#58465 = VECTOR('',#58466,1.); +#58466 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58467 = ORIENTED_EDGE('',*,*,#58380,.F.); +#58468 = PLANE('',#58469); +#58469 = AXIS2_PLACEMENT_3D('',#58470,#58471,#58472); +#58470 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.11)); +#58471 = DIRECTION('',(0.,0.,1.)); +#58472 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58473 = ADVANCED_FACE('',(#58474,#58480),#58491,.F.); +#58474 = FACE_BOUND('',#58475,.F.); +#58475 = EDGE_LOOP('',(#58476,#58477,#58478,#58479)); +#58476 = ORIENTED_EDGE('',*,*,#58032,.F.); +#58477 = ORIENTED_EDGE('',*,*,#58087,.F.); +#58478 = ORIENTED_EDGE('',*,*,#57950,.F.); +#58479 = ORIENTED_EDGE('',*,*,#58445,.F.); +#58480 = FACE_BOUND('',#58481,.F.); +#58481 = EDGE_LOOP('',(#58482)); +#58482 = ORIENTED_EDGE('',*,*,#58483,.T.); +#58483 = EDGE_CURVE('',#58484,#58484,#58486,.T.); +#58484 = VERTEX_POINT('',#58485); +#58485 = CARTESIAN_POINT('',(-0.222747954773,0.297747954773,0.63)); +#58486 = CIRCLE('',#58487,0.125); +#58487 = AXIS2_PLACEMENT_3D('',#58488,#58489,#58490); +#58488 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.63)); +#58489 = DIRECTION('',(-0.,0.,1.)); +#58490 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58491 = PLANE('',#58492); +#58492 = AXIS2_PLACEMENT_3D('',#58493,#58494,#58495); +#58493 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58494 = DIRECTION('',(0.,0.,-1.)); +#58495 = DIRECTION('',(0.595457154844,-0.803387065333,0.)); +#58496 = ADVANCED_FACE('',(#58497),#58508,.T.); +#58497 = FACE_BOUND('',#58498,.T.); +#58498 = EDGE_LOOP('',(#58499,#58500,#58501,#58507)); +#58499 = ORIENTED_EDGE('',*,*,#57934,.F.); +#58500 = ORIENTED_EDGE('',*,*,#58282,.T.); +#58501 = ORIENTED_EDGE('',*,*,#58502,.T.); +#58502 = EDGE_CURVE('',#58267,#57974,#58503,.T.); +#58503 = LINE('',#58504,#58505); +#58504 = CARTESIAN_POINT('',(0.8,-0.11,0.11)); +#58505 = VECTOR('',#58506,1.); +#58506 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58507 = ORIENTED_EDGE('',*,*,#57989,.F.); +#58508 = PLANE('',#58509); +#58509 = AXIS2_PLACEMENT_3D('',#58510,#58511,#58512); +#58510 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.11)); +#58511 = DIRECTION('',(0.,0.,1.)); +#58512 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58513 = ADVANCED_FACE('',(#58514),#58520,.T.); +#58514 = FACE_BOUND('',#58515,.T.); +#58515 = EDGE_LOOP('',(#58516,#58517,#58518,#58519)); +#58516 = ORIENTED_EDGE('',*,*,#58264,.F.); +#58517 = ORIENTED_EDGE('',*,*,#58298,.T.); +#58518 = ORIENTED_EDGE('',*,*,#57971,.T.); +#58519 = ORIENTED_EDGE('',*,*,#58502,.F.); +#58520 = PLANE('',#58521); +#58521 = AXIS2_PLACEMENT_3D('',#58522,#58523,#58524); +#58522 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58523 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58524 = DIRECTION('',(0.,-0.,1.)); +#58525 = ADVANCED_FACE('',(#58526),#58537,.T.); +#58526 = FACE_BOUND('',#58527,.T.); +#58527 = EDGE_LOOP('',(#58528,#58529,#58530,#58536)); +#58528 = ORIENTED_EDGE('',*,*,#58004,.F.); +#58529 = ORIENTED_EDGE('',*,*,#58071,.T.); +#58530 = ORIENTED_EDGE('',*,*,#58531,.T.); +#58531 = EDGE_CURVE('',#58056,#58105,#58532,.T.); +#58532 = LINE('',#58533,#58534); +#58533 = CARTESIAN_POINT('',(-0.8,0.61,0.11)); +#58534 = VECTOR('',#58535,1.); +#58535 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58536 = ORIENTED_EDGE('',*,*,#58120,.F.); +#58537 = PLANE('',#58538); +#58538 = AXIS2_PLACEMENT_3D('',#58539,#58540,#58541); +#58539 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.11)); +#58540 = DIRECTION('',(0.,0.,1.)); +#58541 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58542 = ADVANCED_FACE('',(#58543),#58554,.T.); +#58543 = FACE_BOUND('',#58544,.T.); +#58544 = EDGE_LOOP('',(#58545,#58546,#58547,#58553)); +#58545 = ORIENTED_EDGE('',*,*,#58011,.F.); +#58546 = ORIENTED_EDGE('',*,*,#58169,.T.); +#58547 = ORIENTED_EDGE('',*,*,#58548,.T.); +#58548 = EDGE_CURVE('',#58154,#58186,#58549,.T.); +#58549 = LINE('',#58550,#58551); +#58550 = CARTESIAN_POINT('',(-0.8,0.11,0.11)); +#58551 = VECTOR('',#58552,1.); +#58552 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58553 = ORIENTED_EDGE('',*,*,#58201,.F.); +#58554 = PLANE('',#58555); +#58555 = AXIS2_PLACEMENT_3D('',#58556,#58557,#58558); +#58556 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.11)); +#58557 = DIRECTION('',(0.,0.,1.)); +#58558 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58559 = ADVANCED_FACE('',(#58560),#58571,.T.); +#58560 = FACE_BOUND('',#58561,.T.); +#58561 = EDGE_LOOP('',(#58562,#58563,#58564,#58570)); +#58562 = ORIENTED_EDGE('',*,*,#58018,.F.); +#58563 = ORIENTED_EDGE('',*,*,#58250,.T.); +#58564 = ORIENTED_EDGE('',*,*,#58565,.T.); +#58565 = EDGE_CURVE('',#58235,#58316,#58566,.T.); +#58566 = LINE('',#58567,#58568); +#58567 = CARTESIAN_POINT('',(-0.8,-0.39,0.11)); +#58568 = VECTOR('',#58569,1.); +#58569 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58570 = ORIENTED_EDGE('',*,*,#58331,.F.); +#58571 = PLANE('',#58572); +#58572 = AXIS2_PLACEMENT_3D('',#58573,#58574,#58575); +#58573 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.11)); +#58574 = DIRECTION('',(0.,0.,1.)); +#58575 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58576 = ADVANCED_FACE('',(#58577),#58583,.T.); +#58577 = FACE_BOUND('',#58578,.T.); +#58578 = EDGE_LOOP('',(#58579,#58580,#58581,#58582)); +#58579 = ORIENTED_EDGE('',*,*,#58053,.F.); +#58580 = ORIENTED_EDGE('',*,*,#58136,.T.); +#58581 = ORIENTED_EDGE('',*,*,#58102,.T.); +#58582 = ORIENTED_EDGE('',*,*,#58531,.F.); +#58583 = PLANE('',#58584); +#58584 = AXIS2_PLACEMENT_3D('',#58585,#58586,#58587); +#58585 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58586 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58587 = DIRECTION('',(0.,0.,1.)); +#58588 = ADVANCED_FACE('',(#58589),#58595,.T.); +#58589 = FACE_BOUND('',#58590,.T.); +#58590 = EDGE_LOOP('',(#58591,#58592,#58593,#58594)); +#58591 = ORIENTED_EDGE('',*,*,#58151,.F.); +#58592 = ORIENTED_EDGE('',*,*,#58217,.T.); +#58593 = ORIENTED_EDGE('',*,*,#58183,.T.); +#58594 = ORIENTED_EDGE('',*,*,#58548,.F.); +#58595 = PLANE('',#58596); +#58596 = AXIS2_PLACEMENT_3D('',#58597,#58598,#58599); +#58597 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58598 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58599 = DIRECTION('',(0.,0.,1.)); +#58600 = ADVANCED_FACE('',(#58601),#58607,.T.); +#58601 = FACE_BOUND('',#58602,.T.); +#58602 = EDGE_LOOP('',(#58603,#58604,#58605,#58606)); +#58603 = ORIENTED_EDGE('',*,*,#58232,.F.); +#58604 = ORIENTED_EDGE('',*,*,#58347,.T.); +#58605 = ORIENTED_EDGE('',*,*,#58313,.T.); +#58606 = ORIENTED_EDGE('',*,*,#58565,.F.); +#58607 = PLANE('',#58608); +#58608 = AXIS2_PLACEMENT_3D('',#58609,#58610,#58611); +#58609 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58610 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58611 = DIRECTION('',(0.,0.,1.)); +#58612 = ADVANCED_FACE('',(#58613),#58619,.T.); +#58613 = FACE_BOUND('',#58614,.T.); +#58614 = EDGE_LOOP('',(#58615,#58616,#58617,#58618)); +#58615 = ORIENTED_EDGE('',*,*,#58394,.F.); +#58616 = ORIENTED_EDGE('',*,*,#58428,.T.); +#58617 = ORIENTED_EDGE('',*,*,#58362,.T.); +#58618 = ORIENTED_EDGE('',*,*,#58462,.F.); +#58619 = PLANE('',#58620); +#58620 = AXIS2_PLACEMENT_3D('',#58621,#58622,#58623); +#58621 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58622 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58623 = DIRECTION('',(0.,-0.,1.)); +#58624 = ADVANCED_FACE('',(#58625),#58644,.F.); +#58625 = FACE_BOUND('',#58626,.F.); +#58626 = EDGE_LOOP('',(#58627,#58636,#58642,#58643)); +#58627 = ORIENTED_EDGE('',*,*,#58628,.T.); +#58628 = EDGE_CURVE('',#58629,#58629,#58631,.T.); +#58629 = VERTEX_POINT('',#58630); +#58630 = CARTESIAN_POINT('',(-0.222747954773,0.297747954773,0.6)); +#58631 = CIRCLE('',#58632,0.125); +#58632 = AXIS2_PLACEMENT_3D('',#58633,#58634,#58635); +#58633 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.6)); +#58634 = DIRECTION('',(-0.,0.,1.)); +#58635 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58636 = ORIENTED_EDGE('',*,*,#58637,.F.); +#58637 = EDGE_CURVE('',#58484,#58629,#58638,.T.); +#58638 = LINE('',#58639,#58640); +#58639 = CARTESIAN_POINT('',(-0.222747954773,0.297747954773,0.63)); +#58640 = VECTOR('',#58641,1.); +#58641 = DIRECTION('',(0.,-0.,-1.)); +#58642 = ORIENTED_EDGE('',*,*,#58483,.F.); +#58643 = ORIENTED_EDGE('',*,*,#58637,.T.); +#58644 = CYLINDRICAL_SURFACE('',#58645,0.125); +#58645 = AXIS2_PLACEMENT_3D('',#58646,#58647,#58648); +#58646 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.63)); +#58647 = DIRECTION('',(-0.,0.,-1.)); +#58648 = DIRECTION('',(2.22044604925E-16,-1.,-0.)); +#58649 = ADVANCED_FACE('',(#58650),#58653,.T.); +#58650 = FACE_BOUND('',#58651,.T.); +#58651 = EDGE_LOOP('',(#58652)); +#58652 = ORIENTED_EDGE('',*,*,#58628,.T.); +#58653 = PLANE('',#58654); +#58654 = AXIS2_PLACEMENT_3D('',#58655,#58656,#58657); +#58655 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.6)); +#58656 = DIRECTION('',(0.,0.,1.)); +#58657 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#58662)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#58659,#58660,#58661)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#58659 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#58660 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#58661 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#58662 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#58659, + 'distance_accuracy_value','confusion accuracy'); +#58663 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58664,#58666); +#58664 = ( REPRESENTATION_RELATIONSHIP('','',#56028,#56005) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58665) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58665 = ITEM_DEFINED_TRANSFORMATION('','',#11,#56006); +#58666 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58667); +#58667 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('60','=>[0:1:1:35]','',#56000, + #56023,$); +#58668 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56025)); +#58669 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58670,#58672); +#58670 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58671) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58671 = ITEM_DEFINED_TRANSFORMATION('','',#11,#191); +#58672 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58673); +#58673 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('62','RB3','',#5,#523,$); +#58674 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58675,#58677); +#58675 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58676) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58676 = ITEM_DEFINED_TRANSFORMATION('','',#11,#195); +#58677 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58678); +#58678 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('63','C9','',#5,#14742,$); +#58679 = SHAPE_DEFINITION_REPRESENTATION(#58680,#58686); +#58680 = PRODUCT_DEFINITION_SHAPE('','',#58681); +#58681 = PRODUCT_DEFINITION('design','',#58682,#58685); +#58682 = PRODUCT_DEFINITION_FORMATION('','',#58683); +#58683 = PRODUCT('SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS', + 'SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS','',(#58684)); +#58684 = PRODUCT_CONTEXT('',#2,'mechanical'); +#58685 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#58686 = SHAPE_REPRESENTATION('',(#11,#58687),#58691); +#58687 = AXIS2_PLACEMENT_3D('',#58688,#58689,#58690); +#58688 = CARTESIAN_POINT('',(0.,0.,0.)); +#58689 = DIRECTION('',(0.,0.,1.)); +#58690 = DIRECTION('',(1.,0.,-0.)); +#58691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#58695)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#58692,#58693,#58694)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#58692 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#58693 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#58694 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#58695 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-04),#58692, + 'distance_accuracy_value','confusion accuracy'); +#58696 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58697,#58699); +#58697 = ( REPRESENTATION_RELATIONSHIP('','',#58686,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58698) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58698 = ITEM_DEFINED_TRANSFORMATION('','',#11,#199); +#58699 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58700); +#58700 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('65','SW4G','',#5,#58681,$); +#58701 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#58683)); +#58702 = SHAPE_DEFINITION_REPRESENTATION(#58703,#58709); +#58703 = PRODUCT_DEFINITION_SHAPE('','',#58704); +#58704 = PRODUCT_DEFINITION('design','',#58705,#58708); +#58705 = PRODUCT_DEFINITION_FORMATION('','',#58706); +#58706 = PRODUCT('PTS636Sx25SMTRLFS','PTS636Sx25SMTRLFS','',(#58707)); +#58707 = PRODUCT_CONTEXT('',#2,'mechanical'); +#58708 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#58709 = SHAPE_REPRESENTATION('',(#11,#58710,#60396,#64452,#64804,#65258 + ),#65610); +#58710 = MANIFOLD_SOLID_BREP('',#58711); +#58711 = CLOSED_SHELL('',(#58712,#58988,#59019,#59044,#59121,#59145, + #59170,#59195,#59251,#59275,#59300,#59370,#59401,#59432,#59457, + #59482,#59506,#59530,#59555,#59580,#59604,#59628,#59653,#59684, + #59740,#59765,#59783,#59807,#59832,#59856,#59873,#59887,#59912, + #59952,#59976,#60016,#60034,#60051,#60076,#60100,#60161,#60173, + #60190,#60207,#60233,#60257,#60288,#60306,#60320,#60334,#60348, + #60360,#60372,#60384)); +#58712 = ADVANCED_FACE('',(#58713),#58983,.T.); +#58713 = FACE_BOUND('',#58714,.T.); +#58714 = EDGE_LOOP('',(#58715,#58725,#58734,#58742,#58751,#58759,#58767, + #58775,#58784,#58792,#58801,#58809,#58817,#58826,#58834,#58843, + #58851,#58859,#58868,#58876,#58885,#58893,#58901,#58909,#58918, + #58926,#58935,#58943,#58951,#58960,#58968,#58977)); +#58715 = ORIENTED_EDGE('',*,*,#58716,.T.); +#58716 = EDGE_CURVE('',#58717,#58719,#58721,.T.); +#58717 = VERTEX_POINT('',#58718); +#58718 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#58719 = VERTEX_POINT('',#58720); +#58720 = CARTESIAN_POINT('',(-2.85,1.425,1.2)); +#58721 = LINE('',#58722,#58723); +#58722 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#58723 = VECTOR('',#58724,1.); +#58724 = DIRECTION('',(1.,0.,0.)); +#58725 = ORIENTED_EDGE('',*,*,#58726,.T.); +#58726 = EDGE_CURVE('',#58719,#58727,#58729,.T.); +#58727 = VERTEX_POINT('',#58728); +#58728 = CARTESIAN_POINT('',(-2.725,1.3,1.2)); +#58729 = CIRCLE('',#58730,0.125); +#58730 = AXIS2_PLACEMENT_3D('',#58731,#58732,#58733); +#58731 = CARTESIAN_POINT('',(-2.85,1.3,1.2)); +#58732 = DIRECTION('',(-0.,-0.,-1.)); +#58733 = DIRECTION('',(0.,-1.,0.)); +#58734 = ORIENTED_EDGE('',*,*,#58735,.T.); +#58735 = EDGE_CURVE('',#58727,#58736,#58738,.T.); +#58736 = VERTEX_POINT('',#58737); +#58737 = CARTESIAN_POINT('',(-2.725,0.75,1.2)); +#58738 = LINE('',#58739,#58740); +#58739 = CARTESIAN_POINT('',(-2.725,1.425,1.2)); +#58740 = VECTOR('',#58741,1.); +#58741 = DIRECTION('',(-0.,-1.,-0.)); +#58742 = ORIENTED_EDGE('',*,*,#58743,.T.); +#58743 = EDGE_CURVE('',#58736,#58744,#58746,.T.); +#58744 = VERTEX_POINT('',#58745); +#58745 = CARTESIAN_POINT('',(-2.85,0.625,1.2)); +#58746 = CIRCLE('',#58747,0.125); +#58747 = AXIS2_PLACEMENT_3D('',#58748,#58749,#58750); +#58748 = CARTESIAN_POINT('',(-2.85,0.75,1.2)); +#58749 = DIRECTION('',(-0.,-0.,-1.)); +#58750 = DIRECTION('',(0.,-1.,0.)); +#58751 = ORIENTED_EDGE('',*,*,#58752,.T.); +#58752 = EDGE_CURVE('',#58744,#58753,#58755,.T.); +#58753 = VERTEX_POINT('',#58754); +#58754 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#58755 = LINE('',#58756,#58757); +#58756 = CARTESIAN_POINT('',(-2.725,0.625,1.2)); +#58757 = VECTOR('',#58758,1.); +#58758 = DIRECTION('',(-1.,-0.,-0.)); +#58759 = ORIENTED_EDGE('',*,*,#58760,.F.); +#58760 = EDGE_CURVE('',#58761,#58753,#58763,.T.); +#58761 = VERTEX_POINT('',#58762); +#58762 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#58763 = LINE('',#58764,#58765); +#58764 = CARTESIAN_POINT('',(-3.05,-1.65,1.2)); +#58765 = VECTOR('',#58766,1.); +#58766 = DIRECTION('',(0.,1.,0.)); +#58767 = ORIENTED_EDGE('',*,*,#58768,.F.); +#58768 = EDGE_CURVE('',#58769,#58761,#58771,.T.); +#58769 = VERTEX_POINT('',#58770); +#58770 = CARTESIAN_POINT('',(-2.85,-0.625,1.2)); +#58771 = LINE('',#58772,#58773); +#58772 = CARTESIAN_POINT('',(-2.725,-0.625,1.2)); +#58773 = VECTOR('',#58774,1.); +#58774 = DIRECTION('',(-1.,0.,0.)); +#58775 = ORIENTED_EDGE('',*,*,#58776,.T.); +#58776 = EDGE_CURVE('',#58769,#58777,#58779,.T.); +#58777 = VERTEX_POINT('',#58778); +#58778 = CARTESIAN_POINT('',(-2.725,-0.75,1.2)); +#58779 = CIRCLE('',#58780,0.125); +#58780 = AXIS2_PLACEMENT_3D('',#58781,#58782,#58783); +#58781 = CARTESIAN_POINT('',(-2.85,-0.75,1.2)); +#58782 = DIRECTION('',(-0.,-0.,-1.)); +#58783 = DIRECTION('',(0.,-1.,0.)); +#58784 = ORIENTED_EDGE('',*,*,#58785,.F.); +#58785 = EDGE_CURVE('',#58786,#58777,#58788,.T.); +#58786 = VERTEX_POINT('',#58787); +#58787 = CARTESIAN_POINT('',(-2.725,-1.3,1.2)); +#58788 = LINE('',#58789,#58790); +#58789 = CARTESIAN_POINT('',(-2.725,-1.425,1.2)); +#58790 = VECTOR('',#58791,1.); +#58791 = DIRECTION('',(0.,1.,0.)); +#58792 = ORIENTED_EDGE('',*,*,#58793,.T.); +#58793 = EDGE_CURVE('',#58786,#58794,#58796,.T.); +#58794 = VERTEX_POINT('',#58795); +#58795 = CARTESIAN_POINT('',(-2.85,-1.425,1.2)); +#58796 = CIRCLE('',#58797,0.125); +#58797 = AXIS2_PLACEMENT_3D('',#58798,#58799,#58800); +#58798 = CARTESIAN_POINT('',(-2.85,-1.3,1.2)); +#58799 = DIRECTION('',(-0.,-0.,-1.)); +#58800 = DIRECTION('',(0.,-1.,0.)); +#58801 = ORIENTED_EDGE('',*,*,#58802,.F.); +#58802 = EDGE_CURVE('',#58803,#58794,#58805,.T.); +#58803 = VERTEX_POINT('',#58804); +#58804 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#58805 = LINE('',#58806,#58807); +#58806 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#58807 = VECTOR('',#58808,1.); +#58808 = DIRECTION('',(1.,0.,0.)); +#58809 = ORIENTED_EDGE('',*,*,#58810,.F.); +#58810 = EDGE_CURVE('',#58811,#58803,#58813,.T.); +#58811 = VERTEX_POINT('',#58812); +#58812 = CARTESIAN_POINT('',(-3.05,-1.5,1.2)); +#58813 = LINE('',#58814,#58815); +#58814 = CARTESIAN_POINT('',(-3.05,-1.65,1.2)); +#58815 = VECTOR('',#58816,1.); +#58816 = DIRECTION('',(0.,1.,0.)); +#58817 = ORIENTED_EDGE('',*,*,#58818,.T.); +#58818 = EDGE_CURVE('',#58811,#58819,#58821,.T.); +#58819 = VERTEX_POINT('',#58820); +#58820 = CARTESIAN_POINT('',(-2.9,-1.65,1.2)); +#58821 = CIRCLE('',#58822,0.15); +#58822 = AXIS2_PLACEMENT_3D('',#58823,#58824,#58825); +#58823 = CARTESIAN_POINT('',(-2.9,-1.5,1.2)); +#58824 = DIRECTION('',(-0.,0.,1.)); +#58825 = DIRECTION('',(0.,-1.,0.)); +#58826 = ORIENTED_EDGE('',*,*,#58827,.F.); +#58827 = EDGE_CURVE('',#58828,#58819,#58830,.T.); +#58828 = VERTEX_POINT('',#58829); +#58829 = CARTESIAN_POINT('',(2.9,-1.65,1.2)); +#58830 = LINE('',#58831,#58832); +#58831 = CARTESIAN_POINT('',(3.05,-1.65,1.2)); +#58832 = VECTOR('',#58833,1.); +#58833 = DIRECTION('',(-1.,0.,0.)); +#58834 = ORIENTED_EDGE('',*,*,#58835,.F.); +#58835 = EDGE_CURVE('',#58836,#58828,#58838,.T.); +#58836 = VERTEX_POINT('',#58837); +#58837 = CARTESIAN_POINT('',(3.05,-1.5,1.2)); +#58838 = CIRCLE('',#58839,0.15); +#58839 = AXIS2_PLACEMENT_3D('',#58840,#58841,#58842); +#58840 = CARTESIAN_POINT('',(2.9,-1.5,1.2)); +#58841 = DIRECTION('',(-0.,-0.,-1.)); +#58842 = DIRECTION('',(0.,-1.,0.)); +#58843 = ORIENTED_EDGE('',*,*,#58844,.F.); +#58844 = EDGE_CURVE('',#58845,#58836,#58847,.T.); +#58845 = VERTEX_POINT('',#58846); +#58846 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#58847 = LINE('',#58848,#58849); +#58848 = CARTESIAN_POINT('',(3.05,1.65,1.2)); +#58849 = VECTOR('',#58850,1.); +#58850 = DIRECTION('',(0.,-1.,0.)); +#58851 = ORIENTED_EDGE('',*,*,#58852,.T.); +#58852 = EDGE_CURVE('',#58845,#58853,#58855,.T.); +#58853 = VERTEX_POINT('',#58854); +#58854 = CARTESIAN_POINT('',(2.85,-1.425,1.2)); +#58855 = LINE('',#58856,#58857); +#58856 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#58857 = VECTOR('',#58858,1.); +#58858 = DIRECTION('',(-1.,-0.,-0.)); +#58859 = ORIENTED_EDGE('',*,*,#58860,.F.); +#58860 = EDGE_CURVE('',#58861,#58853,#58863,.T.); +#58861 = VERTEX_POINT('',#58862); +#58862 = CARTESIAN_POINT('',(2.725,-1.3,1.2)); +#58863 = CIRCLE('',#58864,0.125); +#58864 = AXIS2_PLACEMENT_3D('',#58865,#58866,#58867); +#58865 = CARTESIAN_POINT('',(2.85,-1.3,1.2)); +#58866 = DIRECTION('',(-0.,0.,1.)); +#58867 = DIRECTION('',(0.,-1.,0.)); +#58868 = ORIENTED_EDGE('',*,*,#58869,.T.); +#58869 = EDGE_CURVE('',#58861,#58870,#58872,.T.); +#58870 = VERTEX_POINT('',#58871); +#58871 = CARTESIAN_POINT('',(2.725,-0.75,1.2)); +#58872 = LINE('',#58873,#58874); +#58873 = CARTESIAN_POINT('',(2.725,-1.425,1.2)); +#58874 = VECTOR('',#58875,1.); +#58875 = DIRECTION('',(0.,1.,0.)); +#58876 = ORIENTED_EDGE('',*,*,#58877,.F.); +#58877 = EDGE_CURVE('',#58878,#58870,#58880,.T.); +#58878 = VERTEX_POINT('',#58879); +#58879 = CARTESIAN_POINT('',(2.85,-0.625,1.2)); +#58880 = CIRCLE('',#58881,0.125); +#58881 = AXIS2_PLACEMENT_3D('',#58882,#58883,#58884); +#58882 = CARTESIAN_POINT('',(2.85,-0.75,1.2)); +#58883 = DIRECTION('',(-0.,0.,1.)); +#58884 = DIRECTION('',(0.,-1.,0.)); +#58885 = ORIENTED_EDGE('',*,*,#58886,.T.); +#58886 = EDGE_CURVE('',#58878,#58887,#58889,.T.); +#58887 = VERTEX_POINT('',#58888); +#58888 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#58889 = LINE('',#58890,#58891); +#58890 = CARTESIAN_POINT('',(2.725,-0.625,1.2)); +#58891 = VECTOR('',#58892,1.); +#58892 = DIRECTION('',(1.,0.,0.)); +#58893 = ORIENTED_EDGE('',*,*,#58894,.F.); +#58894 = EDGE_CURVE('',#58895,#58887,#58897,.T.); +#58895 = VERTEX_POINT('',#58896); +#58896 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#58897 = LINE('',#58898,#58899); +#58898 = CARTESIAN_POINT('',(3.05,1.65,1.2)); +#58899 = VECTOR('',#58900,1.); +#58900 = DIRECTION('',(0.,-1.,0.)); +#58901 = ORIENTED_EDGE('',*,*,#58902,.F.); +#58902 = EDGE_CURVE('',#58903,#58895,#58905,.T.); +#58903 = VERTEX_POINT('',#58904); +#58904 = CARTESIAN_POINT('',(2.85,0.625,1.2)); +#58905 = LINE('',#58906,#58907); +#58906 = CARTESIAN_POINT('',(2.725,0.625,1.2)); +#58907 = VECTOR('',#58908,1.); +#58908 = DIRECTION('',(1.,0.,0.)); +#58909 = ORIENTED_EDGE('',*,*,#58910,.F.); +#58910 = EDGE_CURVE('',#58911,#58903,#58913,.T.); +#58911 = VERTEX_POINT('',#58912); +#58912 = CARTESIAN_POINT('',(2.725,0.75,1.2)); +#58913 = CIRCLE('',#58914,0.125); +#58914 = AXIS2_PLACEMENT_3D('',#58915,#58916,#58917); +#58915 = CARTESIAN_POINT('',(2.85,0.75,1.2)); +#58916 = DIRECTION('',(-0.,0.,1.)); +#58917 = DIRECTION('',(0.,-1.,0.)); +#58918 = ORIENTED_EDGE('',*,*,#58919,.F.); +#58919 = EDGE_CURVE('',#58920,#58911,#58922,.T.); +#58920 = VERTEX_POINT('',#58921); +#58921 = CARTESIAN_POINT('',(2.725,1.3,1.2)); +#58922 = LINE('',#58923,#58924); +#58923 = CARTESIAN_POINT('',(2.725,1.425,1.2)); +#58924 = VECTOR('',#58925,1.); +#58925 = DIRECTION('',(0.,-1.,0.)); +#58926 = ORIENTED_EDGE('',*,*,#58927,.F.); +#58927 = EDGE_CURVE('',#58928,#58920,#58930,.T.); +#58928 = VERTEX_POINT('',#58929); +#58929 = CARTESIAN_POINT('',(2.85,1.425,1.2)); +#58930 = CIRCLE('',#58931,0.125); +#58931 = AXIS2_PLACEMENT_3D('',#58932,#58933,#58934); +#58932 = CARTESIAN_POINT('',(2.85,1.3,1.2)); +#58933 = DIRECTION('',(-0.,0.,1.)); +#58934 = DIRECTION('',(0.,-1.,0.)); +#58935 = ORIENTED_EDGE('',*,*,#58936,.F.); +#58936 = EDGE_CURVE('',#58937,#58928,#58939,.T.); +#58937 = VERTEX_POINT('',#58938); +#58938 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#58939 = LINE('',#58940,#58941); +#58940 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#58941 = VECTOR('',#58942,1.); +#58942 = DIRECTION('',(-1.,0.,0.)); +#58943 = ORIENTED_EDGE('',*,*,#58944,.F.); +#58944 = EDGE_CURVE('',#58945,#58937,#58947,.T.); +#58945 = VERTEX_POINT('',#58946); +#58946 = CARTESIAN_POINT('',(3.05,1.5,1.2)); +#58947 = LINE('',#58948,#58949); +#58948 = CARTESIAN_POINT('',(3.05,1.65,1.2)); +#58949 = VECTOR('',#58950,1.); +#58950 = DIRECTION('',(0.,-1.,0.)); +#58951 = ORIENTED_EDGE('',*,*,#58952,.F.); +#58952 = EDGE_CURVE('',#58953,#58945,#58955,.T.); +#58953 = VERTEX_POINT('',#58954); +#58954 = CARTESIAN_POINT('',(2.9,1.65,1.2)); +#58955 = CIRCLE('',#58956,0.15); +#58956 = AXIS2_PLACEMENT_3D('',#58957,#58958,#58959); +#58957 = CARTESIAN_POINT('',(2.9,1.5,1.2)); +#58958 = DIRECTION('',(-0.,-0.,-1.)); +#58959 = DIRECTION('',(0.,-1.,0.)); +#58960 = ORIENTED_EDGE('',*,*,#58961,.F.); +#58961 = EDGE_CURVE('',#58962,#58953,#58964,.T.); +#58962 = VERTEX_POINT('',#58963); +#58963 = CARTESIAN_POINT('',(-2.9,1.65,1.2)); +#58964 = LINE('',#58965,#58966); +#58965 = CARTESIAN_POINT('',(-3.05,1.65,1.2)); +#58966 = VECTOR('',#58967,1.); +#58967 = DIRECTION('',(1.,0.,0.)); +#58968 = ORIENTED_EDGE('',*,*,#58969,.T.); +#58969 = EDGE_CURVE('',#58962,#58970,#58972,.T.); +#58970 = VERTEX_POINT('',#58971); +#58971 = CARTESIAN_POINT('',(-3.05,1.5,1.2)); +#58972 = CIRCLE('',#58973,0.15); +#58973 = AXIS2_PLACEMENT_3D('',#58974,#58975,#58976); +#58974 = CARTESIAN_POINT('',(-2.9,1.5,1.2)); +#58975 = DIRECTION('',(-0.,0.,1.)); +#58976 = DIRECTION('',(0.,-1.,0.)); +#58977 = ORIENTED_EDGE('',*,*,#58978,.F.); +#58978 = EDGE_CURVE('',#58717,#58970,#58979,.T.); +#58979 = LINE('',#58980,#58981); +#58980 = CARTESIAN_POINT('',(-3.05,-1.65,1.2)); +#58981 = VECTOR('',#58982,1.); +#58982 = DIRECTION('',(0.,1.,0.)); +#58983 = PLANE('',#58984); +#58984 = AXIS2_PLACEMENT_3D('',#58985,#58986,#58987); +#58985 = CARTESIAN_POINT('',(9.E-17,0.,1.2)); +#58986 = DIRECTION('',(0.,0.,1.)); +#58987 = DIRECTION('',(1.,0.,-0.)); +#58988 = ADVANCED_FACE('',(#58989),#59014,.F.); +#58989 = FACE_BOUND('',#58990,.T.); +#58990 = EDGE_LOOP('',(#58991,#58992,#59000,#59008)); +#58991 = ORIENTED_EDGE('',*,*,#58716,.F.); +#58992 = ORIENTED_EDGE('',*,*,#58993,.T.); +#58993 = EDGE_CURVE('',#58717,#58994,#58996,.T.); +#58994 = VERTEX_POINT('',#58995); +#58995 = CARTESIAN_POINT('',(-3.05,1.425,1.4)); +#58996 = LINE('',#58997,#58998); +#58997 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#58998 = VECTOR('',#58999,1.); +#58999 = DIRECTION('',(0.,0.,1.)); +#59000 = ORIENTED_EDGE('',*,*,#59001,.T.); +#59001 = EDGE_CURVE('',#58994,#59002,#59004,.T.); +#59002 = VERTEX_POINT('',#59003); +#59003 = CARTESIAN_POINT('',(-2.85,1.425,1.4)); +#59004 = LINE('',#59005,#59006); +#59005 = CARTESIAN_POINT('',(-3.05,1.425,1.4)); +#59006 = VECTOR('',#59007,1.); +#59007 = DIRECTION('',(1.,0.,0.)); +#59008 = ORIENTED_EDGE('',*,*,#59009,.F.); +#59009 = EDGE_CURVE('',#58719,#59002,#59010,.T.); +#59010 = LINE('',#59011,#59012); +#59011 = CARTESIAN_POINT('',(-2.85,1.425,1.2)); +#59012 = VECTOR('',#59013,1.); +#59013 = DIRECTION('',(0.,0.,1.)); +#59014 = PLANE('',#59015); +#59015 = AXIS2_PLACEMENT_3D('',#59016,#59017,#59018); +#59016 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#59017 = DIRECTION('',(-0.,-1.,-0.)); +#59018 = DIRECTION('',(-1.,0.,0.)); +#59019 = ADVANCED_FACE('',(#59020),#59039,.T.); +#59020 = FACE_BOUND('',#59021,.T.); +#59021 = EDGE_LOOP('',(#59022,#59023,#59032,#59038)); +#59022 = ORIENTED_EDGE('',*,*,#59009,.T.); +#59023 = ORIENTED_EDGE('',*,*,#59024,.T.); +#59024 = EDGE_CURVE('',#59002,#59025,#59027,.T.); +#59025 = VERTEX_POINT('',#59026); +#59026 = CARTESIAN_POINT('',(-2.725,1.3,1.4)); +#59027 = CIRCLE('',#59028,0.125); +#59028 = AXIS2_PLACEMENT_3D('',#59029,#59030,#59031); +#59029 = CARTESIAN_POINT('',(-2.85,1.3,1.4)); +#59030 = DIRECTION('',(-0.,-0.,-1.)); +#59031 = DIRECTION('',(0.,-1.,0.)); +#59032 = ORIENTED_EDGE('',*,*,#59033,.F.); +#59033 = EDGE_CURVE('',#58727,#59025,#59034,.T.); +#59034 = LINE('',#59035,#59036); +#59035 = CARTESIAN_POINT('',(-2.725,1.3,1.2)); +#59036 = VECTOR('',#59037,1.); +#59037 = DIRECTION('',(0.,0.,1.)); +#59038 = ORIENTED_EDGE('',*,*,#58726,.F.); +#59039 = CYLINDRICAL_SURFACE('',#59040,0.125); +#59040 = AXIS2_PLACEMENT_3D('',#59041,#59042,#59043); +#59041 = CARTESIAN_POINT('',(-2.85,1.3,1.2)); +#59042 = DIRECTION('',(0.,0.,1.)); +#59043 = DIRECTION('',(0.,1.,0.)); +#59044 = ADVANCED_FACE('',(#59045),#59116,.T.); +#59045 = FACE_BOUND('',#59046,.T.); +#59046 = EDGE_LOOP('',(#59047,#59057,#59063,#59064,#59070,#59071,#59077, + #59078,#59086,#59094,#59102,#59110)); +#59047 = ORIENTED_EDGE('',*,*,#59048,.T.); +#59048 = EDGE_CURVE('',#59049,#59051,#59053,.T.); +#59049 = VERTEX_POINT('',#59050); +#59050 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59051 = VERTEX_POINT('',#59052); +#59052 = CARTESIAN_POINT('',(-3.05,-1.5,0.7)); +#59053 = LINE('',#59054,#59055); +#59054 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59055 = VECTOR('',#59056,1.); +#59056 = DIRECTION('',(0.,-1.,0.)); +#59057 = ORIENTED_EDGE('',*,*,#59058,.T.); +#59058 = EDGE_CURVE('',#59051,#58811,#59059,.T.); +#59059 = LINE('',#59060,#59061); +#59060 = CARTESIAN_POINT('',(-3.05,-1.5,0.7)); +#59061 = VECTOR('',#59062,1.); +#59062 = DIRECTION('',(0.,0.,1.)); +#59063 = ORIENTED_EDGE('',*,*,#58810,.T.); +#59064 = ORIENTED_EDGE('',*,*,#59065,.F.); +#59065 = EDGE_CURVE('',#58761,#58803,#59066,.T.); +#59066 = LINE('',#59067,#59068); +#59067 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#59068 = VECTOR('',#59069,1.); +#59069 = DIRECTION('',(0.,-1.,0.)); +#59070 = ORIENTED_EDGE('',*,*,#58760,.T.); +#59071 = ORIENTED_EDGE('',*,*,#59072,.T.); +#59072 = EDGE_CURVE('',#58753,#58717,#59073,.T.); +#59073 = LINE('',#59074,#59075); +#59074 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#59075 = VECTOR('',#59076,1.); +#59076 = DIRECTION('',(0.,1.,0.)); +#59077 = ORIENTED_EDGE('',*,*,#58978,.T.); +#59078 = ORIENTED_EDGE('',*,*,#59079,.F.); +#59079 = EDGE_CURVE('',#59080,#58970,#59082,.T.); +#59080 = VERTEX_POINT('',#59081); +#59081 = CARTESIAN_POINT('',(-3.05,1.5,0.7)); +#59082 = LINE('',#59083,#59084); +#59083 = CARTESIAN_POINT('',(-3.05,1.5,0.7)); +#59084 = VECTOR('',#59085,1.); +#59085 = DIRECTION('',(0.,0.,1.)); +#59086 = ORIENTED_EDGE('',*,*,#59087,.F.); +#59087 = EDGE_CURVE('',#59088,#59080,#59090,.T.); +#59088 = VERTEX_POINT('',#59089); +#59089 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#59090 = LINE('',#59091,#59092); +#59091 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#59092 = VECTOR('',#59093,1.); +#59093 = DIRECTION('',(0.,1.,0.)); +#59094 = ORIENTED_EDGE('',*,*,#59095,.F.); +#59095 = EDGE_CURVE('',#59096,#59088,#59098,.T.); +#59096 = VERTEX_POINT('',#59097); +#59097 = CARTESIAN_POINT('',(-3.05,0.75,0.3)); +#59098 = LINE('',#59099,#59100); +#59099 = CARTESIAN_POINT('',(-3.05,0.75,0.)); +#59100 = VECTOR('',#59101,1.); +#59101 = DIRECTION('',(0.,0.,1.)); +#59102 = ORIENTED_EDGE('',*,*,#59103,.F.); +#59103 = EDGE_CURVE('',#59104,#59096,#59106,.T.); +#59104 = VERTEX_POINT('',#59105); +#59105 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59106 = LINE('',#59107,#59108); +#59107 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59108 = VECTOR('',#59109,1.); +#59109 = DIRECTION('',(2.2E-16,1.,0.)); +#59110 = ORIENTED_EDGE('',*,*,#59111,.T.); +#59111 = EDGE_CURVE('',#59104,#59049,#59112,.T.); +#59112 = LINE('',#59113,#59114); +#59113 = CARTESIAN_POINT('',(-3.05,-0.75,0.)); +#59114 = VECTOR('',#59115,1.); +#59115 = DIRECTION('',(0.,0.,1.)); +#59116 = PLANE('',#59117); +#59117 = AXIS2_PLACEMENT_3D('',#59118,#59119,#59120); +#59118 = CARTESIAN_POINT('',(-3.05,-1.65,0.)); +#59119 = DIRECTION('',(-1.,0.,0.)); +#59120 = DIRECTION('',(0.,1.,0.)); +#59121 = ADVANCED_FACE('',(#59122),#59140,.F.); +#59122 = FACE_BOUND('',#59123,.T.); +#59123 = EDGE_LOOP('',(#59124,#59125,#59126,#59134)); +#59124 = ORIENTED_EDGE('',*,*,#58735,.F.); +#59125 = ORIENTED_EDGE('',*,*,#59033,.T.); +#59126 = ORIENTED_EDGE('',*,*,#59127,.T.); +#59127 = EDGE_CURVE('',#59025,#59128,#59130,.T.); +#59128 = VERTEX_POINT('',#59129); +#59129 = CARTESIAN_POINT('',(-2.725,0.75,1.4)); +#59130 = LINE('',#59131,#59132); +#59131 = CARTESIAN_POINT('',(-2.725,1.425,1.4)); +#59132 = VECTOR('',#59133,1.); +#59133 = DIRECTION('',(-0.,-1.,-0.)); +#59134 = ORIENTED_EDGE('',*,*,#59135,.F.); +#59135 = EDGE_CURVE('',#58736,#59128,#59136,.T.); +#59136 = LINE('',#59137,#59138); +#59137 = CARTESIAN_POINT('',(-2.725,0.75,1.2)); +#59138 = VECTOR('',#59139,1.); +#59139 = DIRECTION('',(0.,0.,1.)); +#59140 = PLANE('',#59141); +#59141 = AXIS2_PLACEMENT_3D('',#59142,#59143,#59144); +#59142 = CARTESIAN_POINT('',(-2.725,1.425,1.2)); +#59143 = DIRECTION('',(-1.,-0.,-0.)); +#59144 = DIRECTION('',(0.,1.,0.)); +#59145 = ADVANCED_FACE('',(#59146),#59165,.T.); +#59146 = FACE_BOUND('',#59147,.T.); +#59147 = EDGE_LOOP('',(#59148,#59157,#59158,#59159)); +#59148 = ORIENTED_EDGE('',*,*,#59149,.T.); +#59149 = EDGE_CURVE('',#59150,#59080,#59152,.T.); +#59150 = VERTEX_POINT('',#59151); +#59151 = CARTESIAN_POINT('',(-2.9,1.65,0.7)); +#59152 = CIRCLE('',#59153,0.15); +#59153 = AXIS2_PLACEMENT_3D('',#59154,#59155,#59156); +#59154 = CARTESIAN_POINT('',(-2.9,1.5,0.7)); +#59155 = DIRECTION('',(-0.,0.,1.)); +#59156 = DIRECTION('',(0.,-1.,0.)); +#59157 = ORIENTED_EDGE('',*,*,#59079,.T.); +#59158 = ORIENTED_EDGE('',*,*,#58969,.F.); +#59159 = ORIENTED_EDGE('',*,*,#59160,.F.); +#59160 = EDGE_CURVE('',#59150,#58962,#59161,.T.); +#59161 = LINE('',#59162,#59163); +#59162 = CARTESIAN_POINT('',(-2.9,1.65,0.7)); +#59163 = VECTOR('',#59164,1.); +#59164 = DIRECTION('',(0.,0.,1.)); +#59165 = CYLINDRICAL_SURFACE('',#59166,0.15); +#59166 = AXIS2_PLACEMENT_3D('',#59167,#59168,#59169); +#59167 = CARTESIAN_POINT('',(-2.9,1.5,0.7)); +#59168 = DIRECTION('',(0.,0.,1.)); +#59169 = DIRECTION('',(0.,1.,0.)); +#59170 = ADVANCED_FACE('',(#59171),#59190,.T.); +#59171 = FACE_BOUND('',#59172,.T.); +#59172 = EDGE_LOOP('',(#59173,#59174,#59183,#59189)); +#59173 = ORIENTED_EDGE('',*,*,#59135,.T.); +#59174 = ORIENTED_EDGE('',*,*,#59175,.T.); +#59175 = EDGE_CURVE('',#59128,#59176,#59178,.T.); +#59176 = VERTEX_POINT('',#59177); +#59177 = CARTESIAN_POINT('',(-2.85,0.625,1.4)); +#59178 = CIRCLE('',#59179,0.125); +#59179 = AXIS2_PLACEMENT_3D('',#59180,#59181,#59182); +#59180 = CARTESIAN_POINT('',(-2.85,0.75,1.4)); +#59181 = DIRECTION('',(-0.,-0.,-1.)); +#59182 = DIRECTION('',(0.,-1.,0.)); +#59183 = ORIENTED_EDGE('',*,*,#59184,.F.); +#59184 = EDGE_CURVE('',#58744,#59176,#59185,.T.); +#59185 = LINE('',#59186,#59187); +#59186 = CARTESIAN_POINT('',(-2.85,0.625,1.2)); +#59187 = VECTOR('',#59188,1.); +#59188 = DIRECTION('',(0.,0.,1.)); +#59189 = ORIENTED_EDGE('',*,*,#58743,.F.); +#59190 = CYLINDRICAL_SURFACE('',#59191,0.125); +#59191 = AXIS2_PLACEMENT_3D('',#59192,#59193,#59194); +#59192 = CARTESIAN_POINT('',(-2.85,0.75,1.2)); +#59193 = DIRECTION('',(0.,0.,1.)); +#59194 = DIRECTION('',(1.,0.,-0.)); +#59195 = ADVANCED_FACE('',(#59196),#59246,.T.); +#59196 = FACE_BOUND('',#59197,.T.); +#59197 = EDGE_LOOP('',(#59198,#59208,#59216,#59224,#59232,#59238,#59239, + #59240)); +#59198 = ORIENTED_EDGE('',*,*,#59199,.T.); +#59199 = EDGE_CURVE('',#59200,#59202,#59204,.T.); +#59200 = VERTEX_POINT('',#59201); +#59201 = CARTESIAN_POINT('',(2.9,1.65,0.7)); +#59202 = VERTEX_POINT('',#59203); +#59203 = CARTESIAN_POINT('',(2.75,1.65,0.7)); +#59204 = LINE('',#59205,#59206); +#59205 = CARTESIAN_POINT('',(3.05,1.65,0.7)); +#59206 = VECTOR('',#59207,1.); +#59207 = DIRECTION('',(-1.,-0.,-0.)); +#59208 = ORIENTED_EDGE('',*,*,#59209,.T.); +#59209 = EDGE_CURVE('',#59202,#59210,#59212,.T.); +#59210 = VERTEX_POINT('',#59211); +#59211 = CARTESIAN_POINT('',(2.75,1.65,0.)); +#59212 = LINE('',#59213,#59214); +#59213 = CARTESIAN_POINT('',(2.75,1.65,0.7)); +#59214 = VECTOR('',#59215,1.); +#59215 = DIRECTION('',(0.,0.,-1.)); +#59216 = ORIENTED_EDGE('',*,*,#59217,.F.); +#59217 = EDGE_CURVE('',#59218,#59210,#59220,.T.); +#59218 = VERTEX_POINT('',#59219); +#59219 = CARTESIAN_POINT('',(-2.75,1.65,0.)); +#59220 = LINE('',#59221,#59222); +#59221 = CARTESIAN_POINT('',(-3.05,1.65,0.)); +#59222 = VECTOR('',#59223,1.); +#59223 = DIRECTION('',(1.,0.,0.)); +#59224 = ORIENTED_EDGE('',*,*,#59225,.F.); +#59225 = EDGE_CURVE('',#59226,#59218,#59228,.T.); +#59226 = VERTEX_POINT('',#59227); +#59227 = CARTESIAN_POINT('',(-2.75,1.65,0.7)); +#59228 = LINE('',#59229,#59230); +#59229 = CARTESIAN_POINT('',(-2.75,1.65,0.7)); +#59230 = VECTOR('',#59231,1.); +#59231 = DIRECTION('',(-0.,-0.,-1.)); +#59232 = ORIENTED_EDGE('',*,*,#59233,.F.); +#59233 = EDGE_CURVE('',#59150,#59226,#59234,.T.); +#59234 = LINE('',#59235,#59236); +#59235 = CARTESIAN_POINT('',(-3.05,1.65,0.7)); +#59236 = VECTOR('',#59237,1.); +#59237 = DIRECTION('',(1.,0.,0.)); +#59238 = ORIENTED_EDGE('',*,*,#59160,.T.); +#59239 = ORIENTED_EDGE('',*,*,#58961,.T.); +#59240 = ORIENTED_EDGE('',*,*,#59241,.F.); +#59241 = EDGE_CURVE('',#59200,#58953,#59242,.T.); +#59242 = LINE('',#59243,#59244); +#59243 = CARTESIAN_POINT('',(2.9,1.65,0.7)); +#59244 = VECTOR('',#59245,1.); +#59245 = DIRECTION('',(0.,0.,1.)); +#59246 = PLANE('',#59247); +#59247 = AXIS2_PLACEMENT_3D('',#59248,#59249,#59250); +#59248 = CARTESIAN_POINT('',(-3.05,1.65,0.)); +#59249 = DIRECTION('',(0.,1.,0.)); +#59250 = DIRECTION('',(1.,0.,0.)); +#59251 = ADVANCED_FACE('',(#59252),#59270,.F.); +#59252 = FACE_BOUND('',#59253,.T.); +#59253 = EDGE_LOOP('',(#59254,#59255,#59256,#59264)); +#59254 = ORIENTED_EDGE('',*,*,#58752,.F.); +#59255 = ORIENTED_EDGE('',*,*,#59184,.T.); +#59256 = ORIENTED_EDGE('',*,*,#59257,.T.); +#59257 = EDGE_CURVE('',#59176,#59258,#59260,.T.); +#59258 = VERTEX_POINT('',#59259); +#59259 = CARTESIAN_POINT('',(-3.05,0.625,1.4)); +#59260 = LINE('',#59261,#59262); +#59261 = CARTESIAN_POINT('',(-2.725,0.625,1.4)); +#59262 = VECTOR('',#59263,1.); +#59263 = DIRECTION('',(-1.,-0.,-0.)); +#59264 = ORIENTED_EDGE('',*,*,#59265,.F.); +#59265 = EDGE_CURVE('',#58753,#59258,#59266,.T.); +#59266 = LINE('',#59267,#59268); +#59267 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#59268 = VECTOR('',#59269,1.); +#59269 = DIRECTION('',(0.,0.,1.)); +#59270 = PLANE('',#59271); +#59271 = AXIS2_PLACEMENT_3D('',#59272,#59273,#59274); +#59272 = CARTESIAN_POINT('',(-2.725,0.625,1.2)); +#59273 = DIRECTION('',(0.,1.,0.)); +#59274 = DIRECTION('',(1.,0.,0.)); +#59275 = ADVANCED_FACE('',(#59276),#59295,.T.); +#59276 = FACE_BOUND('',#59277,.T.); +#59277 = EDGE_LOOP('',(#59278,#59279,#59280,#59288)); +#59278 = ORIENTED_EDGE('',*,*,#59241,.T.); +#59279 = ORIENTED_EDGE('',*,*,#58952,.T.); +#59280 = ORIENTED_EDGE('',*,*,#59281,.F.); +#59281 = EDGE_CURVE('',#59282,#58945,#59284,.T.); +#59282 = VERTEX_POINT('',#59283); +#59283 = CARTESIAN_POINT('',(3.05,1.5,0.7)); +#59284 = LINE('',#59285,#59286); +#59285 = CARTESIAN_POINT('',(3.05,1.5,0.7)); +#59286 = VECTOR('',#59287,1.); +#59287 = DIRECTION('',(0.,0.,1.)); +#59288 = ORIENTED_EDGE('',*,*,#59289,.F.); +#59289 = EDGE_CURVE('',#59200,#59282,#59290,.T.); +#59290 = CIRCLE('',#59291,0.15); +#59291 = AXIS2_PLACEMENT_3D('',#59292,#59293,#59294); +#59292 = CARTESIAN_POINT('',(2.9,1.5,0.7)); +#59293 = DIRECTION('',(-0.,-0.,-1.)); +#59294 = DIRECTION('',(0.,-1.,0.)); +#59295 = CYLINDRICAL_SURFACE('',#59296,0.15); +#59296 = AXIS2_PLACEMENT_3D('',#59297,#59298,#59299); +#59297 = CARTESIAN_POINT('',(2.9,1.5,0.7)); +#59298 = DIRECTION('',(0.,0.,1.)); +#59299 = DIRECTION('',(0.,1.,0.)); +#59300 = ADVANCED_FACE('',(#59301),#59365,.T.); +#59301 = FACE_BOUND('',#59302,.T.); +#59302 = EDGE_LOOP('',(#59303,#59311,#59319,#59327,#59335,#59343,#59349, + #59350,#59351,#59357,#59358,#59364)); +#59303 = ORIENTED_EDGE('',*,*,#59304,.F.); +#59304 = EDGE_CURVE('',#59305,#58836,#59307,.T.); +#59305 = VERTEX_POINT('',#59306); +#59306 = CARTESIAN_POINT('',(3.05,-1.5,0.7)); +#59307 = LINE('',#59308,#59309); +#59308 = CARTESIAN_POINT('',(3.05,-1.5,0.7)); +#59309 = VECTOR('',#59310,1.); +#59310 = DIRECTION('',(0.,0.,1.)); +#59311 = ORIENTED_EDGE('',*,*,#59312,.F.); +#59312 = EDGE_CURVE('',#59313,#59305,#59315,.T.); +#59313 = VERTEX_POINT('',#59314); +#59314 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#59315 = LINE('',#59316,#59317); +#59316 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#59317 = VECTOR('',#59318,1.); +#59318 = DIRECTION('',(-0.,-1.,-0.)); +#59319 = ORIENTED_EDGE('',*,*,#59320,.F.); +#59320 = EDGE_CURVE('',#59321,#59313,#59323,.T.); +#59321 = VERTEX_POINT('',#59322); +#59322 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#59323 = LINE('',#59324,#59325); +#59324 = CARTESIAN_POINT('',(3.05,-0.75,0.)); +#59325 = VECTOR('',#59326,1.); +#59326 = DIRECTION('',(0.,0.,1.)); +#59327 = ORIENTED_EDGE('',*,*,#59328,.T.); +#59328 = EDGE_CURVE('',#59321,#59329,#59331,.T.); +#59329 = VERTEX_POINT('',#59330); +#59330 = CARTESIAN_POINT('',(3.05,0.75,0.3)); +#59331 = LINE('',#59332,#59333); +#59332 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#59333 = VECTOR('',#59334,1.); +#59334 = DIRECTION('',(0.,1.,0.)); +#59335 = ORIENTED_EDGE('',*,*,#59336,.T.); +#59336 = EDGE_CURVE('',#59329,#59337,#59339,.T.); +#59337 = VERTEX_POINT('',#59338); +#59338 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#59339 = LINE('',#59340,#59341); +#59340 = CARTESIAN_POINT('',(3.05,0.75,0.)); +#59341 = VECTOR('',#59342,1.); +#59342 = DIRECTION('',(0.,0.,1.)); +#59343 = ORIENTED_EDGE('',*,*,#59344,.T.); +#59344 = EDGE_CURVE('',#59337,#59282,#59345,.T.); +#59345 = LINE('',#59346,#59347); +#59346 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#59347 = VECTOR('',#59348,1.); +#59348 = DIRECTION('',(0.,1.,0.)); +#59349 = ORIENTED_EDGE('',*,*,#59281,.T.); +#59350 = ORIENTED_EDGE('',*,*,#58944,.T.); +#59351 = ORIENTED_EDGE('',*,*,#59352,.F.); +#59352 = EDGE_CURVE('',#58895,#58937,#59353,.T.); +#59353 = LINE('',#59354,#59355); +#59354 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#59355 = VECTOR('',#59356,1.); +#59356 = DIRECTION('',(0.,1.,0.)); +#59357 = ORIENTED_EDGE('',*,*,#58894,.T.); +#59358 = ORIENTED_EDGE('',*,*,#59359,.T.); +#59359 = EDGE_CURVE('',#58887,#58845,#59360,.T.); +#59360 = LINE('',#59361,#59362); +#59361 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#59362 = VECTOR('',#59363,1.); +#59363 = DIRECTION('',(-0.,-1.,-0.)); +#59364 = ORIENTED_EDGE('',*,*,#58844,.T.); +#59365 = PLANE('',#59366); +#59366 = AXIS2_PLACEMENT_3D('',#59367,#59368,#59369); +#59367 = CARTESIAN_POINT('',(3.05,1.65,0.)); +#59368 = DIRECTION('',(1.,0.,0.)); +#59369 = DIRECTION('',(0.,-1.,0.)); +#59370 = ADVANCED_FACE('',(#59371),#59396,.F.); +#59371 = FACE_BOUND('',#59372,.F.); +#59372 = EDGE_LOOP('',(#59373,#59374,#59382,#59390)); +#59373 = ORIENTED_EDGE('',*,*,#58768,.F.); +#59374 = ORIENTED_EDGE('',*,*,#59375,.T.); +#59375 = EDGE_CURVE('',#58769,#59376,#59378,.T.); +#59376 = VERTEX_POINT('',#59377); +#59377 = CARTESIAN_POINT('',(-2.85,-0.625,1.4)); +#59378 = LINE('',#59379,#59380); +#59379 = CARTESIAN_POINT('',(-2.85,-0.625,1.2)); +#59380 = VECTOR('',#59381,1.); +#59381 = DIRECTION('',(0.,0.,1.)); +#59382 = ORIENTED_EDGE('',*,*,#59383,.T.); +#59383 = EDGE_CURVE('',#59376,#59384,#59386,.T.); +#59384 = VERTEX_POINT('',#59385); +#59385 = CARTESIAN_POINT('',(-3.05,-0.625,1.4)); +#59386 = LINE('',#59387,#59388); +#59387 = CARTESIAN_POINT('',(-2.725,-0.625,1.4)); +#59388 = VECTOR('',#59389,1.); +#59389 = DIRECTION('',(-1.,0.,0.)); +#59390 = ORIENTED_EDGE('',*,*,#59391,.F.); +#59391 = EDGE_CURVE('',#58761,#59384,#59392,.T.); +#59392 = LINE('',#59393,#59394); +#59393 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#59394 = VECTOR('',#59395,1.); +#59395 = DIRECTION('',(0.,0.,1.)); +#59396 = PLANE('',#59397); +#59397 = AXIS2_PLACEMENT_3D('',#59398,#59399,#59400); +#59398 = CARTESIAN_POINT('',(-2.725,-0.625,1.2)); +#59399 = DIRECTION('',(0.,-1.,0.)); +#59400 = DIRECTION('',(-1.,0.,0.)); +#59401 = ADVANCED_FACE('',(#59402),#59427,.F.); +#59402 = FACE_BOUND('',#59403,.F.); +#59403 = EDGE_LOOP('',(#59404,#59405,#59413,#59421)); +#59404 = ORIENTED_EDGE('',*,*,#58936,.F.); +#59405 = ORIENTED_EDGE('',*,*,#59406,.T.); +#59406 = EDGE_CURVE('',#58937,#59407,#59409,.T.); +#59407 = VERTEX_POINT('',#59408); +#59408 = CARTESIAN_POINT('',(3.05,1.425,1.4)); +#59409 = LINE('',#59410,#59411); +#59410 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#59411 = VECTOR('',#59412,1.); +#59412 = DIRECTION('',(0.,0.,1.)); +#59413 = ORIENTED_EDGE('',*,*,#59414,.T.); +#59414 = EDGE_CURVE('',#59407,#59415,#59417,.T.); +#59415 = VERTEX_POINT('',#59416); +#59416 = CARTESIAN_POINT('',(2.85,1.425,1.4)); +#59417 = LINE('',#59418,#59419); +#59418 = CARTESIAN_POINT('',(3.05,1.425,1.4)); +#59419 = VECTOR('',#59420,1.); +#59420 = DIRECTION('',(-1.,0.,0.)); +#59421 = ORIENTED_EDGE('',*,*,#59422,.F.); +#59422 = EDGE_CURVE('',#58928,#59415,#59423,.T.); +#59423 = LINE('',#59424,#59425); +#59424 = CARTESIAN_POINT('',(2.85,1.425,1.2)); +#59425 = VECTOR('',#59426,1.); +#59426 = DIRECTION('',(0.,0.,1.)); +#59427 = PLANE('',#59428); +#59428 = AXIS2_PLACEMENT_3D('',#59429,#59430,#59431); +#59429 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#59430 = DIRECTION('',(0.,-1.,0.)); +#59431 = DIRECTION('',(-1.,0.,0.)); +#59432 = ADVANCED_FACE('',(#59433),#59452,.T.); +#59433 = FACE_BOUND('',#59434,.T.); +#59434 = EDGE_LOOP('',(#59435,#59436,#59445,#59451)); +#59435 = ORIENTED_EDGE('',*,*,#59375,.T.); +#59436 = ORIENTED_EDGE('',*,*,#59437,.T.); +#59437 = EDGE_CURVE('',#59376,#59438,#59440,.T.); +#59438 = VERTEX_POINT('',#59439); +#59439 = CARTESIAN_POINT('',(-2.725,-0.75,1.4)); +#59440 = CIRCLE('',#59441,0.125); +#59441 = AXIS2_PLACEMENT_3D('',#59442,#59443,#59444); +#59442 = CARTESIAN_POINT('',(-2.85,-0.75,1.4)); +#59443 = DIRECTION('',(-0.,-0.,-1.)); +#59444 = DIRECTION('',(0.,-1.,0.)); +#59445 = ORIENTED_EDGE('',*,*,#59446,.F.); +#59446 = EDGE_CURVE('',#58777,#59438,#59447,.T.); +#59447 = LINE('',#59448,#59449); +#59448 = CARTESIAN_POINT('',(-2.725,-0.75,1.2)); +#59449 = VECTOR('',#59450,1.); +#59450 = DIRECTION('',(0.,0.,1.)); +#59451 = ORIENTED_EDGE('',*,*,#58776,.F.); +#59452 = CYLINDRICAL_SURFACE('',#59453,0.125); +#59453 = AXIS2_PLACEMENT_3D('',#59454,#59455,#59456); +#59454 = CARTESIAN_POINT('',(-2.85,-0.75,1.2)); +#59455 = DIRECTION('',(0.,0.,1.)); +#59456 = DIRECTION('',(0.,1.,0.)); +#59457 = ADVANCED_FACE('',(#59458),#59477,.T.); +#59458 = FACE_BOUND('',#59459,.T.); +#59459 = EDGE_LOOP('',(#59460,#59461,#59469,#59476)); +#59460 = ORIENTED_EDGE('',*,*,#58927,.T.); +#59461 = ORIENTED_EDGE('',*,*,#59462,.T.); +#59462 = EDGE_CURVE('',#58920,#59463,#59465,.T.); +#59463 = VERTEX_POINT('',#59464); +#59464 = CARTESIAN_POINT('',(2.725,1.3,1.4)); +#59465 = LINE('',#59466,#59467); +#59466 = CARTESIAN_POINT('',(2.725,1.3,1.2)); +#59467 = VECTOR('',#59468,1.); +#59468 = DIRECTION('',(0.,0.,1.)); +#59469 = ORIENTED_EDGE('',*,*,#59470,.F.); +#59470 = EDGE_CURVE('',#59415,#59463,#59471,.T.); +#59471 = CIRCLE('',#59472,0.125); +#59472 = AXIS2_PLACEMENT_3D('',#59473,#59474,#59475); +#59473 = CARTESIAN_POINT('',(2.85,1.3,1.4)); +#59474 = DIRECTION('',(-0.,0.,1.)); +#59475 = DIRECTION('',(0.,-1.,0.)); +#59476 = ORIENTED_EDGE('',*,*,#59422,.F.); +#59477 = CYLINDRICAL_SURFACE('',#59478,0.125); +#59478 = AXIS2_PLACEMENT_3D('',#59479,#59480,#59481); +#59479 = CARTESIAN_POINT('',(2.85,1.3,1.2)); +#59480 = DIRECTION('',(0.,0.,1.)); +#59481 = DIRECTION('',(0.,1.,0.)); +#59482 = ADVANCED_FACE('',(#59483),#59501,.F.); +#59483 = FACE_BOUND('',#59484,.F.); +#59484 = EDGE_LOOP('',(#59485,#59486,#59494,#59500)); +#59485 = ORIENTED_EDGE('',*,*,#58785,.F.); +#59486 = ORIENTED_EDGE('',*,*,#59487,.T.); +#59487 = EDGE_CURVE('',#58786,#59488,#59490,.T.); +#59488 = VERTEX_POINT('',#59489); +#59489 = CARTESIAN_POINT('',(-2.725,-1.3,1.4)); +#59490 = LINE('',#59491,#59492); +#59491 = CARTESIAN_POINT('',(-2.725,-1.3,1.2)); +#59492 = VECTOR('',#59493,1.); +#59493 = DIRECTION('',(0.,0.,1.)); +#59494 = ORIENTED_EDGE('',*,*,#59495,.T.); +#59495 = EDGE_CURVE('',#59488,#59438,#59496,.T.); +#59496 = LINE('',#59497,#59498); +#59497 = CARTESIAN_POINT('',(-2.725,-1.425,1.4)); +#59498 = VECTOR('',#59499,1.); +#59499 = DIRECTION('',(0.,1.,0.)); +#59500 = ORIENTED_EDGE('',*,*,#59446,.F.); +#59501 = PLANE('',#59502); +#59502 = AXIS2_PLACEMENT_3D('',#59503,#59504,#59505); +#59503 = CARTESIAN_POINT('',(-2.725,-1.425,1.2)); +#59504 = DIRECTION('',(-1.,0.,0.)); +#59505 = DIRECTION('',(0.,1.,0.)); +#59506 = ADVANCED_FACE('',(#59507),#59525,.F.); +#59507 = FACE_BOUND('',#59508,.F.); +#59508 = EDGE_LOOP('',(#59509,#59510,#59511,#59519)); +#59509 = ORIENTED_EDGE('',*,*,#58919,.F.); +#59510 = ORIENTED_EDGE('',*,*,#59462,.T.); +#59511 = ORIENTED_EDGE('',*,*,#59512,.T.); +#59512 = EDGE_CURVE('',#59463,#59513,#59515,.T.); +#59513 = VERTEX_POINT('',#59514); +#59514 = CARTESIAN_POINT('',(2.725,0.75,1.4)); +#59515 = LINE('',#59516,#59517); +#59516 = CARTESIAN_POINT('',(2.725,1.425,1.4)); +#59517 = VECTOR('',#59518,1.); +#59518 = DIRECTION('',(0.,-1.,0.)); +#59519 = ORIENTED_EDGE('',*,*,#59520,.F.); +#59520 = EDGE_CURVE('',#58911,#59513,#59521,.T.); +#59521 = LINE('',#59522,#59523); +#59522 = CARTESIAN_POINT('',(2.725,0.75,1.2)); +#59523 = VECTOR('',#59524,1.); +#59524 = DIRECTION('',(0.,0.,1.)); +#59525 = PLANE('',#59526); +#59526 = AXIS2_PLACEMENT_3D('',#59527,#59528,#59529); +#59527 = CARTESIAN_POINT('',(2.725,1.425,1.2)); +#59528 = DIRECTION('',(1.,0.,0.)); +#59529 = DIRECTION('',(0.,-1.,0.)); +#59530 = ADVANCED_FACE('',(#59531),#59550,.T.); +#59531 = FACE_BOUND('',#59532,.T.); +#59532 = EDGE_LOOP('',(#59533,#59534,#59543,#59549)); +#59533 = ORIENTED_EDGE('',*,*,#59487,.T.); +#59534 = ORIENTED_EDGE('',*,*,#59535,.T.); +#59535 = EDGE_CURVE('',#59488,#59536,#59538,.T.); +#59536 = VERTEX_POINT('',#59537); +#59537 = CARTESIAN_POINT('',(-2.85,-1.425,1.4)); +#59538 = CIRCLE('',#59539,0.125); +#59539 = AXIS2_PLACEMENT_3D('',#59540,#59541,#59542); +#59540 = CARTESIAN_POINT('',(-2.85,-1.3,1.4)); +#59541 = DIRECTION('',(-0.,-0.,-1.)); +#59542 = DIRECTION('',(0.,-1.,0.)); +#59543 = ORIENTED_EDGE('',*,*,#59544,.F.); +#59544 = EDGE_CURVE('',#58794,#59536,#59545,.T.); +#59545 = LINE('',#59546,#59547); +#59546 = CARTESIAN_POINT('',(-2.85,-1.425,1.2)); +#59547 = VECTOR('',#59548,1.); +#59548 = DIRECTION('',(0.,0.,1.)); +#59549 = ORIENTED_EDGE('',*,*,#58793,.F.); +#59550 = CYLINDRICAL_SURFACE('',#59551,0.125); +#59551 = AXIS2_PLACEMENT_3D('',#59552,#59553,#59554); +#59552 = CARTESIAN_POINT('',(-2.85,-1.3,1.2)); +#59553 = DIRECTION('',(0.,0.,1.)); +#59554 = DIRECTION('',(1.,0.,-0.)); +#59555 = ADVANCED_FACE('',(#59556),#59575,.T.); +#59556 = FACE_BOUND('',#59557,.T.); +#59557 = EDGE_LOOP('',(#59558,#59559,#59567,#59574)); +#59558 = ORIENTED_EDGE('',*,*,#58910,.T.); +#59559 = ORIENTED_EDGE('',*,*,#59560,.T.); +#59560 = EDGE_CURVE('',#58903,#59561,#59563,.T.); +#59561 = VERTEX_POINT('',#59562); +#59562 = CARTESIAN_POINT('',(2.85,0.625,1.4)); +#59563 = LINE('',#59564,#59565); +#59564 = CARTESIAN_POINT('',(2.85,0.625,1.2)); +#59565 = VECTOR('',#59566,1.); +#59566 = DIRECTION('',(0.,0.,1.)); +#59567 = ORIENTED_EDGE('',*,*,#59568,.F.); +#59568 = EDGE_CURVE('',#59513,#59561,#59569,.T.); +#59569 = CIRCLE('',#59570,0.125); +#59570 = AXIS2_PLACEMENT_3D('',#59571,#59572,#59573); +#59571 = CARTESIAN_POINT('',(2.85,0.75,1.4)); +#59572 = DIRECTION('',(-0.,0.,1.)); +#59573 = DIRECTION('',(0.,-1.,0.)); +#59574 = ORIENTED_EDGE('',*,*,#59520,.F.); +#59575 = CYLINDRICAL_SURFACE('',#59576,0.125); +#59576 = AXIS2_PLACEMENT_3D('',#59577,#59578,#59579); +#59577 = CARTESIAN_POINT('',(2.85,0.75,1.2)); +#59578 = DIRECTION('',(0.,0.,1.)); +#59579 = DIRECTION('',(-1.,0.,0.)); +#59580 = ADVANCED_FACE('',(#59581),#59599,.F.); +#59581 = FACE_BOUND('',#59582,.F.); +#59582 = EDGE_LOOP('',(#59583,#59584,#59592,#59598)); +#59583 = ORIENTED_EDGE('',*,*,#58802,.F.); +#59584 = ORIENTED_EDGE('',*,*,#59585,.T.); +#59585 = EDGE_CURVE('',#58803,#59586,#59588,.T.); +#59586 = VERTEX_POINT('',#59587); +#59587 = CARTESIAN_POINT('',(-3.05,-1.425,1.4)); +#59588 = LINE('',#59589,#59590); +#59589 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#59590 = VECTOR('',#59591,1.); +#59591 = DIRECTION('',(0.,0.,1.)); +#59592 = ORIENTED_EDGE('',*,*,#59593,.T.); +#59593 = EDGE_CURVE('',#59586,#59536,#59594,.T.); +#59594 = LINE('',#59595,#59596); +#59595 = CARTESIAN_POINT('',(-3.05,-1.425,1.4)); +#59596 = VECTOR('',#59597,1.); +#59597 = DIRECTION('',(1.,0.,0.)); +#59598 = ORIENTED_EDGE('',*,*,#59544,.F.); +#59599 = PLANE('',#59600); +#59600 = AXIS2_PLACEMENT_3D('',#59601,#59602,#59603); +#59601 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#59602 = DIRECTION('',(0.,1.,0.)); +#59603 = DIRECTION('',(1.,0.,0.)); +#59604 = ADVANCED_FACE('',(#59605),#59623,.F.); +#59605 = FACE_BOUND('',#59606,.F.); +#59606 = EDGE_LOOP('',(#59607,#59608,#59609,#59617)); +#59607 = ORIENTED_EDGE('',*,*,#58902,.F.); +#59608 = ORIENTED_EDGE('',*,*,#59560,.T.); +#59609 = ORIENTED_EDGE('',*,*,#59610,.T.); +#59610 = EDGE_CURVE('',#59561,#59611,#59613,.T.); +#59611 = VERTEX_POINT('',#59612); +#59612 = CARTESIAN_POINT('',(3.05,0.625,1.4)); +#59613 = LINE('',#59614,#59615); +#59614 = CARTESIAN_POINT('',(2.725,0.625,1.4)); +#59615 = VECTOR('',#59616,1.); +#59616 = DIRECTION('',(1.,0.,0.)); +#59617 = ORIENTED_EDGE('',*,*,#59618,.F.); +#59618 = EDGE_CURVE('',#58895,#59611,#59619,.T.); +#59619 = LINE('',#59620,#59621); +#59620 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#59621 = VECTOR('',#59622,1.); +#59622 = DIRECTION('',(0.,0.,1.)); +#59623 = PLANE('',#59624); +#59624 = AXIS2_PLACEMENT_3D('',#59625,#59626,#59627); +#59625 = CARTESIAN_POINT('',(2.725,0.625,1.2)); +#59626 = DIRECTION('',(0.,1.,0.)); +#59627 = DIRECTION('',(1.,0.,0.)); +#59628 = ADVANCED_FACE('',(#59629),#59648,.T.); +#59629 = FACE_BOUND('',#59630,.T.); +#59630 = EDGE_LOOP('',(#59631,#59640,#59646,#59647)); +#59631 = ORIENTED_EDGE('',*,*,#59632,.T.); +#59632 = EDGE_CURVE('',#59051,#59633,#59635,.T.); +#59633 = VERTEX_POINT('',#59634); +#59634 = CARTESIAN_POINT('',(-2.9,-1.65,0.7)); +#59635 = CIRCLE('',#59636,0.15); +#59636 = AXIS2_PLACEMENT_3D('',#59637,#59638,#59639); +#59637 = CARTESIAN_POINT('',(-2.9,-1.5,0.7)); +#59638 = DIRECTION('',(-0.,0.,1.)); +#59639 = DIRECTION('',(0.,-1.,0.)); +#59640 = ORIENTED_EDGE('',*,*,#59641,.T.); +#59641 = EDGE_CURVE('',#59633,#58819,#59642,.T.); +#59642 = LINE('',#59643,#59644); +#59643 = CARTESIAN_POINT('',(-2.9,-1.65,0.7)); +#59644 = VECTOR('',#59645,1.); +#59645 = DIRECTION('',(0.,0.,1.)); +#59646 = ORIENTED_EDGE('',*,*,#58818,.F.); +#59647 = ORIENTED_EDGE('',*,*,#59058,.F.); +#59648 = CYLINDRICAL_SURFACE('',#59649,0.15); +#59649 = AXIS2_PLACEMENT_3D('',#59650,#59651,#59652); +#59650 = CARTESIAN_POINT('',(-2.9,-1.5,0.7)); +#59651 = DIRECTION('',(0.,0.,1.)); +#59652 = DIRECTION('',(-1.,0.,0.)); +#59653 = ADVANCED_FACE('',(#59654),#59679,.F.); +#59654 = FACE_BOUND('',#59655,.T.); +#59655 = EDGE_LOOP('',(#59656,#59657,#59665,#59673)); +#59656 = ORIENTED_EDGE('',*,*,#58886,.F.); +#59657 = ORIENTED_EDGE('',*,*,#59658,.T.); +#59658 = EDGE_CURVE('',#58878,#59659,#59661,.T.); +#59659 = VERTEX_POINT('',#59660); +#59660 = CARTESIAN_POINT('',(2.85,-0.625,1.4)); +#59661 = LINE('',#59662,#59663); +#59662 = CARTESIAN_POINT('',(2.85,-0.625,1.2)); +#59663 = VECTOR('',#59664,1.); +#59664 = DIRECTION('',(0.,0.,1.)); +#59665 = ORIENTED_EDGE('',*,*,#59666,.T.); +#59666 = EDGE_CURVE('',#59659,#59667,#59669,.T.); +#59667 = VERTEX_POINT('',#59668); +#59668 = CARTESIAN_POINT('',(3.05,-0.625,1.4)); +#59669 = LINE('',#59670,#59671); +#59670 = CARTESIAN_POINT('',(2.725,-0.625,1.4)); +#59671 = VECTOR('',#59672,1.); +#59672 = DIRECTION('',(1.,0.,0.)); +#59673 = ORIENTED_EDGE('',*,*,#59674,.F.); +#59674 = EDGE_CURVE('',#58887,#59667,#59675,.T.); +#59675 = LINE('',#59676,#59677); +#59676 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#59677 = VECTOR('',#59678,1.); +#59678 = DIRECTION('',(0.,0.,1.)); +#59679 = PLANE('',#59680); +#59680 = AXIS2_PLACEMENT_3D('',#59681,#59682,#59683); +#59681 = CARTESIAN_POINT('',(2.725,-0.625,1.2)); +#59682 = DIRECTION('',(-0.,-1.,-0.)); +#59683 = DIRECTION('',(-1.,0.,0.)); +#59684 = ADVANCED_FACE('',(#59685),#59735,.T.); +#59685 = FACE_BOUND('',#59686,.T.); +#59686 = EDGE_LOOP('',(#59687,#59697,#59703,#59704,#59705,#59713,#59721, + #59729)); +#59687 = ORIENTED_EDGE('',*,*,#59688,.F.); +#59688 = EDGE_CURVE('',#59689,#59691,#59693,.T.); +#59689 = VERTEX_POINT('',#59690); +#59690 = CARTESIAN_POINT('',(2.9,-1.65,0.7)); +#59691 = VERTEX_POINT('',#59692); +#59692 = CARTESIAN_POINT('',(2.75,-1.65,0.7)); +#59693 = LINE('',#59694,#59695); +#59694 = CARTESIAN_POINT('',(3.05,-1.65,0.7)); +#59695 = VECTOR('',#59696,1.); +#59696 = DIRECTION('',(-1.,0.,0.)); +#59697 = ORIENTED_EDGE('',*,*,#59698,.T.); +#59698 = EDGE_CURVE('',#59689,#58828,#59699,.T.); +#59699 = LINE('',#59700,#59701); +#59700 = CARTESIAN_POINT('',(2.9,-1.65,0.7)); +#59701 = VECTOR('',#59702,1.); +#59702 = DIRECTION('',(0.,0.,1.)); +#59703 = ORIENTED_EDGE('',*,*,#58827,.T.); +#59704 = ORIENTED_EDGE('',*,*,#59641,.F.); +#59705 = ORIENTED_EDGE('',*,*,#59706,.T.); +#59706 = EDGE_CURVE('',#59633,#59707,#59709,.T.); +#59707 = VERTEX_POINT('',#59708); +#59708 = CARTESIAN_POINT('',(-2.75,-1.65,0.7)); +#59709 = LINE('',#59710,#59711); +#59710 = CARTESIAN_POINT('',(-3.05,-1.65,0.7)); +#59711 = VECTOR('',#59712,1.); +#59712 = DIRECTION('',(1.,0.,-0.)); +#59713 = ORIENTED_EDGE('',*,*,#59714,.T.); +#59714 = EDGE_CURVE('',#59707,#59715,#59717,.T.); +#59715 = VERTEX_POINT('',#59716); +#59716 = CARTESIAN_POINT('',(-2.75,-1.65,0.)); +#59717 = LINE('',#59718,#59719); +#59718 = CARTESIAN_POINT('',(-2.75,-1.65,0.7)); +#59719 = VECTOR('',#59720,1.); +#59720 = DIRECTION('',(0.,0.,-1.)); +#59721 = ORIENTED_EDGE('',*,*,#59722,.F.); +#59722 = EDGE_CURVE('',#59723,#59715,#59725,.T.); +#59723 = VERTEX_POINT('',#59724); +#59724 = CARTESIAN_POINT('',(2.75,-1.65,0.)); +#59725 = LINE('',#59726,#59727); +#59726 = CARTESIAN_POINT('',(3.05,-1.65,0.)); +#59727 = VECTOR('',#59728,1.); +#59728 = DIRECTION('',(-1.,0.,0.)); +#59729 = ORIENTED_EDGE('',*,*,#59730,.F.); +#59730 = EDGE_CURVE('',#59691,#59723,#59731,.T.); +#59731 = LINE('',#59732,#59733); +#59732 = CARTESIAN_POINT('',(2.75,-1.65,0.7)); +#59733 = VECTOR('',#59734,1.); +#59734 = DIRECTION('',(-0.,-0.,-1.)); +#59735 = PLANE('',#59736); +#59736 = AXIS2_PLACEMENT_3D('',#59737,#59738,#59739); +#59737 = CARTESIAN_POINT('',(3.05,-1.65,0.)); +#59738 = DIRECTION('',(0.,-1.,0.)); +#59739 = DIRECTION('',(-1.,0.,0.)); +#59740 = ADVANCED_FACE('',(#59741),#59760,.T.); +#59741 = FACE_BOUND('',#59742,.T.); +#59742 = EDGE_LOOP('',(#59743,#59744,#59752,#59759)); +#59743 = ORIENTED_EDGE('',*,*,#58877,.T.); +#59744 = ORIENTED_EDGE('',*,*,#59745,.T.); +#59745 = EDGE_CURVE('',#58870,#59746,#59748,.T.); +#59746 = VERTEX_POINT('',#59747); +#59747 = CARTESIAN_POINT('',(2.725,-0.75,1.4)); +#59748 = LINE('',#59749,#59750); +#59749 = CARTESIAN_POINT('',(2.725,-0.75,1.2)); +#59750 = VECTOR('',#59751,1.); +#59751 = DIRECTION('',(0.,0.,1.)); +#59752 = ORIENTED_EDGE('',*,*,#59753,.F.); +#59753 = EDGE_CURVE('',#59659,#59746,#59754,.T.); +#59754 = CIRCLE('',#59755,0.125); +#59755 = AXIS2_PLACEMENT_3D('',#59756,#59757,#59758); +#59756 = CARTESIAN_POINT('',(2.85,-0.75,1.4)); +#59757 = DIRECTION('',(-0.,0.,1.)); +#59758 = DIRECTION('',(0.,-1.,0.)); +#59759 = ORIENTED_EDGE('',*,*,#59658,.F.); +#59760 = CYLINDRICAL_SURFACE('',#59761,0.125); +#59761 = AXIS2_PLACEMENT_3D('',#59762,#59763,#59764); +#59762 = CARTESIAN_POINT('',(2.85,-0.75,1.2)); +#59763 = DIRECTION('',(0.,0.,1.)); +#59764 = DIRECTION('',(0.,1.,0.)); +#59765 = ADVANCED_FACE('',(#59766),#59778,.T.); +#59766 = FACE_BOUND('',#59767,.T.); +#59767 = EDGE_LOOP('',(#59768,#59769,#59770,#59771)); +#59768 = ORIENTED_EDGE('',*,*,#59304,.T.); +#59769 = ORIENTED_EDGE('',*,*,#58835,.T.); +#59770 = ORIENTED_EDGE('',*,*,#59698,.F.); +#59771 = ORIENTED_EDGE('',*,*,#59772,.F.); +#59772 = EDGE_CURVE('',#59305,#59689,#59773,.T.); +#59773 = CIRCLE('',#59774,0.15); +#59774 = AXIS2_PLACEMENT_3D('',#59775,#59776,#59777); +#59775 = CARTESIAN_POINT('',(2.9,-1.5,0.7)); +#59776 = DIRECTION('',(-0.,-0.,-1.)); +#59777 = DIRECTION('',(0.,-1.,0.)); +#59778 = CYLINDRICAL_SURFACE('',#59779,0.15); +#59779 = AXIS2_PLACEMENT_3D('',#59780,#59781,#59782); +#59780 = CARTESIAN_POINT('',(2.9,-1.5,0.7)); +#59781 = DIRECTION('',(0.,0.,1.)); +#59782 = DIRECTION('',(1.,0.,-0.)); +#59783 = ADVANCED_FACE('',(#59784),#59802,.F.); +#59784 = FACE_BOUND('',#59785,.T.); +#59785 = EDGE_LOOP('',(#59786,#59787,#59795,#59801)); +#59786 = ORIENTED_EDGE('',*,*,#58869,.F.); +#59787 = ORIENTED_EDGE('',*,*,#59788,.T.); +#59788 = EDGE_CURVE('',#58861,#59789,#59791,.T.); +#59789 = VERTEX_POINT('',#59790); +#59790 = CARTESIAN_POINT('',(2.725,-1.3,1.4)); +#59791 = LINE('',#59792,#59793); +#59792 = CARTESIAN_POINT('',(2.725,-1.3,1.2)); +#59793 = VECTOR('',#59794,1.); +#59794 = DIRECTION('',(0.,0.,1.)); +#59795 = ORIENTED_EDGE('',*,*,#59796,.T.); +#59796 = EDGE_CURVE('',#59789,#59746,#59797,.T.); +#59797 = LINE('',#59798,#59799); +#59798 = CARTESIAN_POINT('',(2.725,-1.425,1.4)); +#59799 = VECTOR('',#59800,1.); +#59800 = DIRECTION('',(0.,1.,0.)); +#59801 = ORIENTED_EDGE('',*,*,#59745,.F.); +#59802 = PLANE('',#59803); +#59803 = AXIS2_PLACEMENT_3D('',#59804,#59805,#59806); +#59804 = CARTESIAN_POINT('',(2.725,-1.425,1.2)); +#59805 = DIRECTION('',(1.,0.,0.)); +#59806 = DIRECTION('',(0.,-1.,0.)); +#59807 = ADVANCED_FACE('',(#59808),#59827,.T.); +#59808 = FACE_BOUND('',#59809,.T.); +#59809 = EDGE_LOOP('',(#59810,#59811,#59819,#59826)); +#59810 = ORIENTED_EDGE('',*,*,#58860,.T.); +#59811 = ORIENTED_EDGE('',*,*,#59812,.T.); +#59812 = EDGE_CURVE('',#58853,#59813,#59815,.T.); +#59813 = VERTEX_POINT('',#59814); +#59814 = CARTESIAN_POINT('',(2.85,-1.425,1.4)); +#59815 = LINE('',#59816,#59817); +#59816 = CARTESIAN_POINT('',(2.85,-1.425,1.2)); +#59817 = VECTOR('',#59818,1.); +#59818 = DIRECTION('',(0.,0.,1.)); +#59819 = ORIENTED_EDGE('',*,*,#59820,.F.); +#59820 = EDGE_CURVE('',#59789,#59813,#59821,.T.); +#59821 = CIRCLE('',#59822,0.125); +#59822 = AXIS2_PLACEMENT_3D('',#59823,#59824,#59825); +#59823 = CARTESIAN_POINT('',(2.85,-1.3,1.4)); +#59824 = DIRECTION('',(-0.,0.,1.)); +#59825 = DIRECTION('',(0.,-1.,0.)); +#59826 = ORIENTED_EDGE('',*,*,#59788,.F.); +#59827 = CYLINDRICAL_SURFACE('',#59828,0.125); +#59828 = AXIS2_PLACEMENT_3D('',#59829,#59830,#59831); +#59829 = CARTESIAN_POINT('',(2.85,-1.3,1.2)); +#59830 = DIRECTION('',(0.,0.,1.)); +#59831 = DIRECTION('',(-1.,0.,0.)); +#59832 = ADVANCED_FACE('',(#59833),#59851,.F.); +#59833 = FACE_BOUND('',#59834,.T.); +#59834 = EDGE_LOOP('',(#59835,#59836,#59844,#59850)); +#59835 = ORIENTED_EDGE('',*,*,#58852,.F.); +#59836 = ORIENTED_EDGE('',*,*,#59837,.T.); +#59837 = EDGE_CURVE('',#58845,#59838,#59840,.T.); +#59838 = VERTEX_POINT('',#59839); +#59839 = CARTESIAN_POINT('',(3.05,-1.425,1.4)); +#59840 = LINE('',#59841,#59842); +#59841 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#59842 = VECTOR('',#59843,1.); +#59843 = DIRECTION('',(0.,0.,1.)); +#59844 = ORIENTED_EDGE('',*,*,#59845,.T.); +#59845 = EDGE_CURVE('',#59838,#59813,#59846,.T.); +#59846 = LINE('',#59847,#59848); +#59847 = CARTESIAN_POINT('',(3.05,-1.425,1.4)); +#59848 = VECTOR('',#59849,1.); +#59849 = DIRECTION('',(-1.,-0.,-0.)); +#59850 = ORIENTED_EDGE('',*,*,#59812,.F.); +#59851 = PLANE('',#59852); +#59852 = AXIS2_PLACEMENT_3D('',#59853,#59854,#59855); +#59853 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#59854 = DIRECTION('',(0.,1.,0.)); +#59855 = DIRECTION('',(1.,0.,0.)); +#59856 = ADVANCED_FACE('',(#59857),#59868,.F.); +#59857 = FACE_BOUND('',#59858,.T.); +#59858 = EDGE_LOOP('',(#59859,#59860,#59866,#59867)); +#59859 = ORIENTED_EDGE('',*,*,#59265,.T.); +#59860 = ORIENTED_EDGE('',*,*,#59861,.T.); +#59861 = EDGE_CURVE('',#59258,#58994,#59862,.T.); +#59862 = LINE('',#59863,#59864); +#59863 = CARTESIAN_POINT('',(-3.05,0.625,1.4)); +#59864 = VECTOR('',#59865,1.); +#59865 = DIRECTION('',(0.,1.,0.)); +#59866 = ORIENTED_EDGE('',*,*,#58993,.F.); +#59867 = ORIENTED_EDGE('',*,*,#59072,.F.); +#59868 = PLANE('',#59869); +#59869 = AXIS2_PLACEMENT_3D('',#59870,#59871,#59872); +#59870 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#59871 = DIRECTION('',(1.,0.,0.)); +#59872 = DIRECTION('',(0.,-1.,0.)); +#59873 = ADVANCED_FACE('',(#59874),#59882,.T.); +#59874 = FACE_BOUND('',#59875,.F.); +#59875 = EDGE_LOOP('',(#59876,#59877,#59878,#59879,#59880,#59881)); +#59876 = ORIENTED_EDGE('',*,*,#59001,.T.); +#59877 = ORIENTED_EDGE('',*,*,#59024,.T.); +#59878 = ORIENTED_EDGE('',*,*,#59127,.T.); +#59879 = ORIENTED_EDGE('',*,*,#59175,.T.); +#59880 = ORIENTED_EDGE('',*,*,#59257,.T.); +#59881 = ORIENTED_EDGE('',*,*,#59861,.T.); +#59882 = PLANE('',#59883); +#59883 = AXIS2_PLACEMENT_3D('',#59884,#59885,#59886); +#59884 = CARTESIAN_POINT('',(-2.8875,1.025,1.4)); +#59885 = DIRECTION('',(0.,0.,1.)); +#59886 = DIRECTION('',(1.,0.,-0.)); +#59887 = ADVANCED_FACE('',(#59888),#59907,.T.); +#59888 = FACE_BOUND('',#59889,.T.); +#59889 = EDGE_LOOP('',(#59890,#59891,#59892,#59893,#59901)); +#59890 = ORIENTED_EDGE('',*,*,#59706,.F.); +#59891 = ORIENTED_EDGE('',*,*,#59632,.F.); +#59892 = ORIENTED_EDGE('',*,*,#59048,.F.); +#59893 = ORIENTED_EDGE('',*,*,#59894,.T.); +#59894 = EDGE_CURVE('',#59049,#59895,#59897,.T.); +#59895 = VERTEX_POINT('',#59896); +#59896 = CARTESIAN_POINT('',(-2.75,-0.75,0.7)); +#59897 = LINE('',#59898,#59899); +#59898 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59899 = VECTOR('',#59900,1.); +#59900 = DIRECTION('',(1.,0.,-0.)); +#59901 = ORIENTED_EDGE('',*,*,#59902,.T.); +#59902 = EDGE_CURVE('',#59895,#59707,#59903,.T.); +#59903 = LINE('',#59904,#59905); +#59904 = CARTESIAN_POINT('',(-2.75,-0.75,0.7)); +#59905 = VECTOR('',#59906,1.); +#59906 = DIRECTION('',(0.,-1.,0.)); +#59907 = PLANE('',#59908); +#59908 = AXIS2_PLACEMENT_3D('',#59909,#59910,#59911); +#59909 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59910 = DIRECTION('',(0.,0.,-1.)); +#59911 = DIRECTION('',(0.,-1.,0.)); +#59912 = ADVANCED_FACE('',(#59913),#59947,.T.); +#59913 = FACE_BOUND('',#59914,.T.); +#59914 = EDGE_LOOP('',(#59915,#59925,#59933,#59939,#59940,#59941)); +#59915 = ORIENTED_EDGE('',*,*,#59916,.F.); +#59916 = EDGE_CURVE('',#59917,#59919,#59921,.T.); +#59917 = VERTEX_POINT('',#59918); +#59918 = CARTESIAN_POINT('',(-3.,-0.75,-1.E-15)); +#59919 = VERTEX_POINT('',#59920); +#59920 = CARTESIAN_POINT('',(-3.,-0.75,0.3)); +#59921 = LINE('',#59922,#59923); +#59922 = CARTESIAN_POINT('',(-3.,-0.75,-6.7E-16)); +#59923 = VECTOR('',#59924,1.); +#59924 = DIRECTION('',(-2.2E-16,0.,1.)); +#59925 = ORIENTED_EDGE('',*,*,#59926,.T.); +#59926 = EDGE_CURVE('',#59917,#59927,#59929,.T.); +#59927 = VERTEX_POINT('',#59928); +#59928 = CARTESIAN_POINT('',(-2.75,-0.75,0.)); +#59929 = LINE('',#59930,#59931); +#59930 = CARTESIAN_POINT('',(-3.05,-0.75,0.)); +#59931 = VECTOR('',#59932,1.); +#59932 = DIRECTION('',(1.,0.,-0.)); +#59933 = ORIENTED_EDGE('',*,*,#59934,.T.); +#59934 = EDGE_CURVE('',#59927,#59895,#59935,.T.); +#59935 = LINE('',#59936,#59937); +#59936 = CARTESIAN_POINT('',(-2.75,-0.75,0.)); +#59937 = VECTOR('',#59938,1.); +#59938 = DIRECTION('',(0.,0.,1.)); +#59939 = ORIENTED_EDGE('',*,*,#59894,.F.); +#59940 = ORIENTED_EDGE('',*,*,#59111,.F.); +#59941 = ORIENTED_EDGE('',*,*,#59942,.T.); +#59942 = EDGE_CURVE('',#59104,#59919,#59943,.T.); +#59943 = LINE('',#59944,#59945); +#59944 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59945 = VECTOR('',#59946,1.); +#59946 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#59947 = PLANE('',#59948); +#59948 = AXIS2_PLACEMENT_3D('',#59949,#59950,#59951); +#59949 = CARTESIAN_POINT('',(-3.05,-0.75,0.)); +#59950 = DIRECTION('',(0.,-1.,0.)); +#59951 = DIRECTION('',(0.,0.,1.)); +#59952 = ADVANCED_FACE('',(#59953),#59971,.T.); +#59953 = FACE_BOUND('',#59954,.F.); +#59954 = EDGE_LOOP('',(#59955,#59956,#59964,#59970)); +#59955 = ORIENTED_EDGE('',*,*,#59942,.T.); +#59956 = ORIENTED_EDGE('',*,*,#59957,.T.); +#59957 = EDGE_CURVE('',#59919,#59958,#59960,.T.); +#59958 = VERTEX_POINT('',#59959); +#59959 = CARTESIAN_POINT('',(-3.,0.75,0.3)); +#59960 = LINE('',#59961,#59962); +#59961 = CARTESIAN_POINT('',(-3.,-0.75,0.3)); +#59962 = VECTOR('',#59963,1.); +#59963 = DIRECTION('',(2.2E-16,1.,0.)); +#59964 = ORIENTED_EDGE('',*,*,#59965,.F.); +#59965 = EDGE_CURVE('',#59096,#59958,#59966,.T.); +#59966 = LINE('',#59967,#59968); +#59967 = CARTESIAN_POINT('',(-3.05,0.75,0.3)); +#59968 = VECTOR('',#59969,1.); +#59969 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#59970 = ORIENTED_EDGE('',*,*,#59103,.F.); +#59971 = PLANE('',#59972); +#59972 = AXIS2_PLACEMENT_3D('',#59973,#59974,#59975); +#59973 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59974 = DIRECTION('',(2.2E-16,0.,-1.)); +#59975 = DIRECTION('',(-2.2E-16,-1.,-4.84E-32)); +#59976 = ADVANCED_FACE('',(#59977),#60011,.T.); +#59977 = FACE_BOUND('',#59978,.F.); +#59978 = EDGE_LOOP('',(#59979,#59987,#59995,#60003,#60009,#60010)); +#59979 = ORIENTED_EDGE('',*,*,#59980,.T.); +#59980 = EDGE_CURVE('',#59958,#59981,#59983,.T.); +#59981 = VERTEX_POINT('',#59982); +#59982 = CARTESIAN_POINT('',(-3.,0.75,-1.E-15)); +#59983 = LINE('',#59984,#59985); +#59984 = CARTESIAN_POINT('',(-3.,0.75,0.3)); +#59985 = VECTOR('',#59986,1.); +#59986 = DIRECTION('',(2.2E-16,0.,-1.)); +#59987 = ORIENTED_EDGE('',*,*,#59988,.T.); +#59988 = EDGE_CURVE('',#59981,#59989,#59991,.T.); +#59989 = VERTEX_POINT('',#59990); +#59990 = CARTESIAN_POINT('',(-2.75,0.75,0.)); +#59991 = LINE('',#59992,#59993); +#59992 = CARTESIAN_POINT('',(-3.05,0.75,0.)); +#59993 = VECTOR('',#59994,1.); +#59994 = DIRECTION('',(1.,0.,0.)); +#59995 = ORIENTED_EDGE('',*,*,#59996,.T.); +#59996 = EDGE_CURVE('',#59989,#59997,#59999,.T.); +#59997 = VERTEX_POINT('',#59998); +#59998 = CARTESIAN_POINT('',(-2.75,0.75,0.7)); +#59999 = LINE('',#60000,#60001); +#60000 = CARTESIAN_POINT('',(-2.75,0.75,0.)); +#60001 = VECTOR('',#60002,1.); +#60002 = DIRECTION('',(0.,0.,1.)); +#60003 = ORIENTED_EDGE('',*,*,#60004,.F.); +#60004 = EDGE_CURVE('',#59088,#59997,#60005,.T.); +#60005 = LINE('',#60006,#60007); +#60006 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#60007 = VECTOR('',#60008,1.); +#60008 = DIRECTION('',(1.,0.,0.)); +#60009 = ORIENTED_EDGE('',*,*,#59095,.F.); +#60010 = ORIENTED_EDGE('',*,*,#59965,.T.); +#60011 = PLANE('',#60012); +#60012 = AXIS2_PLACEMENT_3D('',#60013,#60014,#60015); +#60013 = CARTESIAN_POINT('',(-3.05,0.75,0.)); +#60014 = DIRECTION('',(0.,1.,0.)); +#60015 = DIRECTION('',(0.,0.,-1.)); +#60016 = ADVANCED_FACE('',(#60017),#60029,.T.); +#60017 = FACE_BOUND('',#60018,.F.); +#60018 = EDGE_LOOP('',(#60019,#60020,#60021,#60022,#60023)); +#60019 = ORIENTED_EDGE('',*,*,#59233,.F.); +#60020 = ORIENTED_EDGE('',*,*,#59149,.T.); +#60021 = ORIENTED_EDGE('',*,*,#59087,.F.); +#60022 = ORIENTED_EDGE('',*,*,#60004,.T.); +#60023 = ORIENTED_EDGE('',*,*,#60024,.T.); +#60024 = EDGE_CURVE('',#59997,#59226,#60025,.T.); +#60025 = LINE('',#60026,#60027); +#60026 = CARTESIAN_POINT('',(-2.75,0.75,0.7)); +#60027 = VECTOR('',#60028,1.); +#60028 = DIRECTION('',(0.,1.,0.)); +#60029 = PLANE('',#60030); +#60030 = AXIS2_PLACEMENT_3D('',#60031,#60032,#60033); +#60031 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#60032 = DIRECTION('',(-0.,-0.,-1.)); +#60033 = DIRECTION('',(0.,-1.,0.)); +#60034 = ADVANCED_FACE('',(#60035),#60046,.F.); +#60035 = FACE_BOUND('',#60036,.F.); +#60036 = EDGE_LOOP('',(#60037,#60038,#60044,#60045)); +#60037 = ORIENTED_EDGE('',*,*,#59391,.T.); +#60038 = ORIENTED_EDGE('',*,*,#60039,.T.); +#60039 = EDGE_CURVE('',#59384,#59586,#60040,.T.); +#60040 = LINE('',#60041,#60042); +#60041 = CARTESIAN_POINT('',(-3.05,-0.625,1.4)); +#60042 = VECTOR('',#60043,1.); +#60043 = DIRECTION('',(0.,-1.,0.)); +#60044 = ORIENTED_EDGE('',*,*,#59585,.F.); +#60045 = ORIENTED_EDGE('',*,*,#59065,.F.); +#60046 = PLANE('',#60047); +#60047 = AXIS2_PLACEMENT_3D('',#60048,#60049,#60050); +#60048 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#60049 = DIRECTION('',(1.,0.,0.)); +#60050 = DIRECTION('',(0.,-1.,0.)); +#60051 = ADVANCED_FACE('',(#60052),#60071,.T.); +#60052 = FACE_BOUND('',#60053,.T.); +#60053 = EDGE_LOOP('',(#60054,#60055,#60056,#60057,#60065)); +#60054 = ORIENTED_EDGE('',*,*,#59199,.F.); +#60055 = ORIENTED_EDGE('',*,*,#59289,.T.); +#60056 = ORIENTED_EDGE('',*,*,#59344,.F.); +#60057 = ORIENTED_EDGE('',*,*,#60058,.T.); +#60058 = EDGE_CURVE('',#59337,#60059,#60061,.T.); +#60059 = VERTEX_POINT('',#60060); +#60060 = CARTESIAN_POINT('',(2.75,0.75,0.7)); +#60061 = LINE('',#60062,#60063); +#60062 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#60063 = VECTOR('',#60064,1.); +#60064 = DIRECTION('',(-1.,-0.,-0.)); +#60065 = ORIENTED_EDGE('',*,*,#60066,.T.); +#60066 = EDGE_CURVE('',#60059,#59202,#60067,.T.); +#60067 = LINE('',#60068,#60069); +#60068 = CARTESIAN_POINT('',(2.75,0.75,0.7)); +#60069 = VECTOR('',#60070,1.); +#60070 = DIRECTION('',(0.,1.,0.)); +#60071 = PLANE('',#60072); +#60072 = AXIS2_PLACEMENT_3D('',#60073,#60074,#60075); +#60073 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#60074 = DIRECTION('',(0.,0.,-1.)); +#60075 = DIRECTION('',(0.,1.,0.)); +#60076 = ADVANCED_FACE('',(#60077),#60095,.T.); +#60077 = FACE_BOUND('',#60078,.F.); +#60078 = EDGE_LOOP('',(#60079,#60080,#60081,#60089)); +#60079 = ORIENTED_EDGE('',*,*,#60066,.T.); +#60080 = ORIENTED_EDGE('',*,*,#59209,.T.); +#60081 = ORIENTED_EDGE('',*,*,#60082,.T.); +#60082 = EDGE_CURVE('',#59210,#60083,#60085,.T.); +#60083 = VERTEX_POINT('',#60084); +#60084 = CARTESIAN_POINT('',(2.75,0.75,0.)); +#60085 = LINE('',#60086,#60087); +#60086 = CARTESIAN_POINT('',(2.75,1.65,0.)); +#60087 = VECTOR('',#60088,1.); +#60088 = DIRECTION('',(0.,-1.,0.)); +#60089 = ORIENTED_EDGE('',*,*,#60090,.T.); +#60090 = EDGE_CURVE('',#60083,#60059,#60091,.T.); +#60091 = LINE('',#60092,#60093); +#60092 = CARTESIAN_POINT('',(2.75,0.75,0.)); +#60093 = VECTOR('',#60094,1.); +#60094 = DIRECTION('',(0.,0.,1.)); +#60095 = PLANE('',#60096); +#60096 = AXIS2_PLACEMENT_3D('',#60097,#60098,#60099); +#60097 = CARTESIAN_POINT('',(2.75,1.2,0.35)); +#60098 = DIRECTION('',(1.,0.,0.)); +#60099 = DIRECTION('',(-0.,1.,0.)); +#60100 = ADVANCED_FACE('',(#60101),#60156,.F.); +#60101 = FACE_BOUND('',#60102,.F.); +#60102 = EDGE_LOOP('',(#60103,#60104,#60110,#60111,#60117,#60118,#60124, + #60125,#60133,#60141,#60149,#60155)); +#60103 = ORIENTED_EDGE('',*,*,#59217,.F.); +#60104 = ORIENTED_EDGE('',*,*,#60105,.T.); +#60105 = EDGE_CURVE('',#59218,#59989,#60106,.T.); +#60106 = LINE('',#60107,#60108); +#60107 = CARTESIAN_POINT('',(-2.75,1.65,0.)); +#60108 = VECTOR('',#60109,1.); +#60109 = DIRECTION('',(-0.,-1.,-0.)); +#60110 = ORIENTED_EDGE('',*,*,#59988,.F.); +#60111 = ORIENTED_EDGE('',*,*,#60112,.T.); +#60112 = EDGE_CURVE('',#59981,#59917,#60113,.T.); +#60113 = LINE('',#60114,#60115); +#60114 = CARTESIAN_POINT('',(-3.,0.75,-6.7E-16)); +#60115 = VECTOR('',#60116,1.); +#60116 = DIRECTION('',(-2.2E-16,-1.,-0.)); +#60117 = ORIENTED_EDGE('',*,*,#59926,.T.); +#60118 = ORIENTED_EDGE('',*,*,#60119,.F.); +#60119 = EDGE_CURVE('',#59715,#59927,#60120,.T.); +#60120 = LINE('',#60121,#60122); +#60121 = CARTESIAN_POINT('',(-2.75,-1.65,0.)); +#60122 = VECTOR('',#60123,1.); +#60123 = DIRECTION('',(0.,1.,0.)); +#60124 = ORIENTED_EDGE('',*,*,#59722,.F.); +#60125 = ORIENTED_EDGE('',*,*,#60126,.T.); +#60126 = EDGE_CURVE('',#59723,#60127,#60129,.T.); +#60127 = VERTEX_POINT('',#60128); +#60128 = CARTESIAN_POINT('',(2.75,-0.75,0.)); +#60129 = LINE('',#60130,#60131); +#60130 = CARTESIAN_POINT('',(2.75,-1.65,0.)); +#60131 = VECTOR('',#60132,1.); +#60132 = DIRECTION('',(0.,1.,0.)); +#60133 = ORIENTED_EDGE('',*,*,#60134,.F.); +#60134 = EDGE_CURVE('',#60135,#60127,#60137,.T.); +#60135 = VERTEX_POINT('',#60136); +#60136 = CARTESIAN_POINT('',(3.,-0.75,0.)); +#60137 = LINE('',#60138,#60139); +#60138 = CARTESIAN_POINT('',(3.05,-0.75,0.)); +#60139 = VECTOR('',#60140,1.); +#60140 = DIRECTION('',(-1.,0.,0.)); +#60141 = ORIENTED_EDGE('',*,*,#60142,.F.); +#60142 = EDGE_CURVE('',#60143,#60135,#60145,.T.); +#60143 = VERTEX_POINT('',#60144); +#60144 = CARTESIAN_POINT('',(3.,0.75,0.)); +#60145 = LINE('',#60146,#60147); +#60146 = CARTESIAN_POINT('',(3.,0.75,0.)); +#60147 = VECTOR('',#60148,1.); +#60148 = DIRECTION('',(0.,-1.,0.)); +#60149 = ORIENTED_EDGE('',*,*,#60150,.T.); +#60150 = EDGE_CURVE('',#60143,#60083,#60151,.T.); +#60151 = LINE('',#60152,#60153); +#60152 = CARTESIAN_POINT('',(3.05,0.75,0.)); +#60153 = VECTOR('',#60154,1.); +#60154 = DIRECTION('',(-1.,-0.,-0.)); +#60155 = ORIENTED_EDGE('',*,*,#60082,.F.); +#60156 = PLANE('',#60157); +#60157 = AXIS2_PLACEMENT_3D('',#60158,#60159,#60160); +#60158 = CARTESIAN_POINT('',(9.E-17,0.,0.)); +#60159 = DIRECTION('',(0.,0.,1.)); +#60160 = DIRECTION('',(1.,0.,-0.)); +#60161 = ADVANCED_FACE('',(#60162),#60168,.T.); +#60162 = FACE_BOUND('',#60163,.T.); +#60163 = EDGE_LOOP('',(#60164,#60165,#60166,#60167)); +#60164 = ORIENTED_EDGE('',*,*,#60024,.T.); +#60165 = ORIENTED_EDGE('',*,*,#59225,.T.); +#60166 = ORIENTED_EDGE('',*,*,#60105,.T.); +#60167 = ORIENTED_EDGE('',*,*,#59996,.T.); +#60168 = PLANE('',#60169); +#60169 = AXIS2_PLACEMENT_3D('',#60170,#60171,#60172); +#60170 = CARTESIAN_POINT('',(-2.75,1.2,0.35)); +#60171 = DIRECTION('',(-1.,-0.,-0.)); +#60172 = DIRECTION('',(0.,-1.,0.)); +#60173 = ADVANCED_FACE('',(#60174),#60185,.F.); +#60174 = FACE_BOUND('',#60175,.T.); +#60175 = EDGE_LOOP('',(#60176,#60177,#60183,#60184)); +#60176 = ORIENTED_EDGE('',*,*,#59674,.T.); +#60177 = ORIENTED_EDGE('',*,*,#60178,.T.); +#60178 = EDGE_CURVE('',#59667,#59838,#60179,.T.); +#60179 = LINE('',#60180,#60181); +#60180 = CARTESIAN_POINT('',(3.05,-0.625,1.4)); +#60181 = VECTOR('',#60182,1.); +#60182 = DIRECTION('',(-0.,-1.,-0.)); +#60183 = ORIENTED_EDGE('',*,*,#59837,.F.); +#60184 = ORIENTED_EDGE('',*,*,#59359,.F.); +#60185 = PLANE('',#60186); +#60186 = AXIS2_PLACEMENT_3D('',#60187,#60188,#60189); +#60187 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#60188 = DIRECTION('',(-1.,-0.,-0.)); +#60189 = DIRECTION('',(0.,1.,0.)); +#60190 = ADVANCED_FACE('',(#60191),#60202,.F.); +#60191 = FACE_BOUND('',#60192,.F.); +#60192 = EDGE_LOOP('',(#60193,#60194,#60200,#60201)); +#60193 = ORIENTED_EDGE('',*,*,#59618,.T.); +#60194 = ORIENTED_EDGE('',*,*,#60195,.T.); +#60195 = EDGE_CURVE('',#59611,#59407,#60196,.T.); +#60196 = LINE('',#60197,#60198); +#60197 = CARTESIAN_POINT('',(3.05,0.625,1.4)); +#60198 = VECTOR('',#60199,1.); +#60199 = DIRECTION('',(0.,1.,0.)); +#60200 = ORIENTED_EDGE('',*,*,#59406,.F.); +#60201 = ORIENTED_EDGE('',*,*,#59352,.F.); +#60202 = PLANE('',#60203); +#60203 = AXIS2_PLACEMENT_3D('',#60204,#60205,#60206); +#60204 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#60205 = DIRECTION('',(-1.,0.,0.)); +#60206 = DIRECTION('',(0.,1.,0.)); +#60207 = ADVANCED_FACE('',(#60208),#60228,.T.); +#60208 = FACE_BOUND('',#60209,.T.); +#60209 = EDGE_LOOP('',(#60210,#60218,#60219,#60220,#60221,#60222)); +#60210 = ORIENTED_EDGE('',*,*,#60211,.T.); +#60211 = EDGE_CURVE('',#60212,#60143,#60214,.T.); +#60212 = VERTEX_POINT('',#60213); +#60213 = CARTESIAN_POINT('',(3.,0.75,0.3)); +#60214 = LINE('',#60215,#60216); +#60215 = CARTESIAN_POINT('',(3.,0.75,0.3)); +#60216 = VECTOR('',#60217,1.); +#60217 = DIRECTION('',(0.,0.,-1.)); +#60218 = ORIENTED_EDGE('',*,*,#60150,.T.); +#60219 = ORIENTED_EDGE('',*,*,#60090,.T.); +#60220 = ORIENTED_EDGE('',*,*,#60058,.F.); +#60221 = ORIENTED_EDGE('',*,*,#59336,.F.); +#60222 = ORIENTED_EDGE('',*,*,#60223,.T.); +#60223 = EDGE_CURVE('',#59329,#60212,#60224,.T.); +#60224 = LINE('',#60225,#60226); +#60225 = CARTESIAN_POINT('',(3.05,0.75,0.3)); +#60226 = VECTOR('',#60227,1.); +#60227 = DIRECTION('',(-1.,-0.,-0.)); +#60228 = PLANE('',#60229); +#60229 = AXIS2_PLACEMENT_3D('',#60230,#60231,#60232); +#60230 = CARTESIAN_POINT('',(3.05,0.75,0.)); +#60231 = DIRECTION('',(0.,1.,0.)); +#60232 = DIRECTION('',(0.,-0.,1.)); +#60233 = ADVANCED_FACE('',(#60234),#60252,.T.); +#60234 = FACE_BOUND('',#60235,.T.); +#60235 = EDGE_LOOP('',(#60236,#60244,#60250,#60251)); +#60236 = ORIENTED_EDGE('',*,*,#60237,.T.); +#60237 = EDGE_CURVE('',#59321,#60238,#60240,.T.); +#60238 = VERTEX_POINT('',#60239); +#60239 = CARTESIAN_POINT('',(3.,-0.75,0.3)); +#60240 = LINE('',#60241,#60242); +#60241 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#60242 = VECTOR('',#60243,1.); +#60243 = DIRECTION('',(-1.,-0.,-0.)); +#60244 = ORIENTED_EDGE('',*,*,#60245,.T.); +#60245 = EDGE_CURVE('',#60238,#60212,#60246,.T.); +#60246 = LINE('',#60247,#60248); +#60247 = CARTESIAN_POINT('',(3.,-0.75,0.3)); +#60248 = VECTOR('',#60249,1.); +#60249 = DIRECTION('',(0.,1.,0.)); +#60250 = ORIENTED_EDGE('',*,*,#60223,.F.); +#60251 = ORIENTED_EDGE('',*,*,#59328,.F.); +#60252 = PLANE('',#60253); +#60253 = AXIS2_PLACEMENT_3D('',#60254,#60255,#60256); +#60254 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#60255 = DIRECTION('',(0.,0.,-1.)); +#60256 = DIRECTION('',(0.,1.,0.)); +#60257 = ADVANCED_FACE('',(#60258),#60283,.T.); +#60258 = FACE_BOUND('',#60259,.F.); +#60259 = EDGE_LOOP('',(#60260,#60266,#60267,#60275,#60281,#60282)); +#60260 = ORIENTED_EDGE('',*,*,#60261,.F.); +#60261 = EDGE_CURVE('',#60135,#60238,#60262,.T.); +#60262 = LINE('',#60263,#60264); +#60263 = CARTESIAN_POINT('',(3.,-0.75,0.)); +#60264 = VECTOR('',#60265,1.); +#60265 = DIRECTION('',(0.,0.,1.)); +#60266 = ORIENTED_EDGE('',*,*,#60134,.T.); +#60267 = ORIENTED_EDGE('',*,*,#60268,.T.); +#60268 = EDGE_CURVE('',#60127,#60269,#60271,.T.); +#60269 = VERTEX_POINT('',#60270); +#60270 = CARTESIAN_POINT('',(2.75,-0.75,0.7)); +#60271 = LINE('',#60272,#60273); +#60272 = CARTESIAN_POINT('',(2.75,-0.75,0.)); +#60273 = VECTOR('',#60274,1.); +#60274 = DIRECTION('',(0.,0.,1.)); +#60275 = ORIENTED_EDGE('',*,*,#60276,.F.); +#60276 = EDGE_CURVE('',#59313,#60269,#60277,.T.); +#60277 = LINE('',#60278,#60279); +#60278 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#60279 = VECTOR('',#60280,1.); +#60280 = DIRECTION('',(-1.,0.,0.)); +#60281 = ORIENTED_EDGE('',*,*,#59320,.F.); +#60282 = ORIENTED_EDGE('',*,*,#60237,.T.); +#60283 = PLANE('',#60284); +#60284 = AXIS2_PLACEMENT_3D('',#60285,#60286,#60287); +#60285 = CARTESIAN_POINT('',(3.05,-0.75,0.)); +#60286 = DIRECTION('',(-0.,-1.,-0.)); +#60287 = DIRECTION('',(0.,0.,-1.)); +#60288 = ADVANCED_FACE('',(#60289),#60301,.T.); +#60289 = FACE_BOUND('',#60290,.F.); +#60290 = EDGE_LOOP('',(#60291,#60292,#60293,#60294,#60295)); +#60291 = ORIENTED_EDGE('',*,*,#59688,.F.); +#60292 = ORIENTED_EDGE('',*,*,#59772,.F.); +#60293 = ORIENTED_EDGE('',*,*,#59312,.F.); +#60294 = ORIENTED_EDGE('',*,*,#60276,.T.); +#60295 = ORIENTED_EDGE('',*,*,#60296,.T.); +#60296 = EDGE_CURVE('',#60269,#59691,#60297,.T.); +#60297 = LINE('',#60298,#60299); +#60298 = CARTESIAN_POINT('',(2.75,-0.75,0.7)); +#60299 = VECTOR('',#60300,1.); +#60300 = DIRECTION('',(-0.,-1.,-0.)); +#60301 = PLANE('',#60302); +#60302 = AXIS2_PLACEMENT_3D('',#60303,#60304,#60305); +#60303 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#60304 = DIRECTION('',(-0.,-0.,-1.)); +#60305 = DIRECTION('',(0.,1.,-0.)); +#60306 = ADVANCED_FACE('',(#60307),#60315,.T.); +#60307 = FACE_BOUND('',#60308,.T.); +#60308 = EDGE_LOOP('',(#60309,#60310,#60311,#60312,#60313,#60314)); +#60309 = ORIENTED_EDGE('',*,*,#59593,.T.); +#60310 = ORIENTED_EDGE('',*,*,#59535,.F.); +#60311 = ORIENTED_EDGE('',*,*,#59495,.T.); +#60312 = ORIENTED_EDGE('',*,*,#59437,.F.); +#60313 = ORIENTED_EDGE('',*,*,#59383,.T.); +#60314 = ORIENTED_EDGE('',*,*,#60039,.T.); +#60315 = PLANE('',#60316); +#60316 = AXIS2_PLACEMENT_3D('',#60317,#60318,#60319); +#60317 = CARTESIAN_POINT('',(-2.8875,-1.025,1.4)); +#60318 = DIRECTION('',(0.,0.,1.)); +#60319 = DIRECTION('',(-1.,0.,0.)); +#60320 = ADVANCED_FACE('',(#60321),#60329,.T.); +#60321 = FACE_BOUND('',#60322,.T.); +#60322 = EDGE_LOOP('',(#60323,#60324,#60325,#60326,#60327,#60328)); +#60323 = ORIENTED_EDGE('',*,*,#59414,.T.); +#60324 = ORIENTED_EDGE('',*,*,#59470,.T.); +#60325 = ORIENTED_EDGE('',*,*,#59512,.T.); +#60326 = ORIENTED_EDGE('',*,*,#59568,.T.); +#60327 = ORIENTED_EDGE('',*,*,#59610,.T.); +#60328 = ORIENTED_EDGE('',*,*,#60195,.T.); +#60329 = PLANE('',#60330); +#60330 = AXIS2_PLACEMENT_3D('',#60331,#60332,#60333); +#60331 = CARTESIAN_POINT('',(2.8875,1.025,1.4)); +#60332 = DIRECTION('',(0.,0.,1.)); +#60333 = DIRECTION('',(1.,0.,-0.)); +#60334 = ADVANCED_FACE('',(#60335),#60343,.T.); +#60335 = FACE_BOUND('',#60336,.F.); +#60336 = EDGE_LOOP('',(#60337,#60338,#60339,#60340,#60341,#60342)); +#60337 = ORIENTED_EDGE('',*,*,#59845,.T.); +#60338 = ORIENTED_EDGE('',*,*,#59820,.F.); +#60339 = ORIENTED_EDGE('',*,*,#59796,.T.); +#60340 = ORIENTED_EDGE('',*,*,#59753,.F.); +#60341 = ORIENTED_EDGE('',*,*,#59666,.T.); +#60342 = ORIENTED_EDGE('',*,*,#60178,.T.); +#60343 = PLANE('',#60344); +#60344 = AXIS2_PLACEMENT_3D('',#60345,#60346,#60347); +#60345 = CARTESIAN_POINT('',(2.8875,-1.025,1.4)); +#60346 = DIRECTION('',(0.,0.,1.)); +#60347 = DIRECTION('',(-1.,0.,0.)); +#60348 = ADVANCED_FACE('',(#60349),#60355,.T.); +#60349 = FACE_BOUND('',#60350,.T.); +#60350 = EDGE_LOOP('',(#60351,#60352,#60353,#60354)); +#60351 = ORIENTED_EDGE('',*,*,#60296,.T.); +#60352 = ORIENTED_EDGE('',*,*,#59730,.T.); +#60353 = ORIENTED_EDGE('',*,*,#60126,.T.); +#60354 = ORIENTED_EDGE('',*,*,#60268,.T.); +#60355 = PLANE('',#60356); +#60356 = AXIS2_PLACEMENT_3D('',#60357,#60358,#60359); +#60357 = CARTESIAN_POINT('',(2.75,-1.2,0.35)); +#60358 = DIRECTION('',(1.,0.,0.)); +#60359 = DIRECTION('',(-0.,1.,0.)); +#60360 = ADVANCED_FACE('',(#60361),#60367,.T.); +#60361 = FACE_BOUND('',#60362,.F.); +#60362 = EDGE_LOOP('',(#60363,#60364,#60365,#60366)); +#60363 = ORIENTED_EDGE('',*,*,#59902,.T.); +#60364 = ORIENTED_EDGE('',*,*,#59714,.T.); +#60365 = ORIENTED_EDGE('',*,*,#60119,.T.); +#60366 = ORIENTED_EDGE('',*,*,#59934,.T.); +#60367 = PLANE('',#60368); +#60368 = AXIS2_PLACEMENT_3D('',#60369,#60370,#60371); +#60369 = CARTESIAN_POINT('',(-2.75,-1.2,0.35)); +#60370 = DIRECTION('',(-1.,0.,0.)); +#60371 = DIRECTION('',(0.,-1.,0.)); +#60372 = ADVANCED_FACE('',(#60373),#60379,.T.); +#60373 = FACE_BOUND('',#60374,.T.); +#60374 = EDGE_LOOP('',(#60375,#60376,#60377,#60378)); +#60375 = ORIENTED_EDGE('',*,*,#59957,.T.); +#60376 = ORIENTED_EDGE('',*,*,#59980,.T.); +#60377 = ORIENTED_EDGE('',*,*,#60112,.T.); +#60378 = ORIENTED_EDGE('',*,*,#59916,.T.); +#60379 = PLANE('',#60380); +#60380 = AXIS2_PLACEMENT_3D('',#60381,#60382,#60383); +#60381 = CARTESIAN_POINT('',(-3.,5.4E-16,0.15)); +#60382 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#60383 = DIRECTION('',(2.2E-16,1.741711239665E-48,-1.)); +#60384 = ADVANCED_FACE('',(#60385),#60391,.T.); +#60385 = FACE_BOUND('',#60386,.F.); +#60386 = EDGE_LOOP('',(#60387,#60388,#60389,#60390)); +#60387 = ORIENTED_EDGE('',*,*,#60245,.T.); +#60388 = ORIENTED_EDGE('',*,*,#60211,.T.); +#60389 = ORIENTED_EDGE('',*,*,#60142,.T.); +#60390 = ORIENTED_EDGE('',*,*,#60261,.T.); +#60391 = PLANE('',#60392); +#60392 = AXIS2_PLACEMENT_3D('',#60393,#60394,#60395); +#60393 = CARTESIAN_POINT('',(3.,-1.3E-16,0.15)); +#60394 = DIRECTION('',(1.,0.,0.)); +#60395 = DIRECTION('',(0.,0.,1.)); +#60396 = MANIFOLD_SOLID_BREP('',#60397); +#60397 = CLOSED_SHELL('',(#60398,#60522,#60553,#60578,#60609,#60633, + #60698,#60723,#60748,#60772,#60829,#60854,#60885,#60909,#60940, + #60958,#60982,#61019,#61052,#61076,#61227,#61260,#61277,#61440, + #61473,#61497,#61521,#61554,#61571,#61596,#61613,#61662,#61687, + #61730,#61746,#61786,#61842,#61859,#61884,#61932,#61963,#61988, + #62013,#62037,#62061,#62086,#62111,#62128,#62152,#62168,#62185, + #62228,#62252,#62278,#62321,#62371,#62421,#62452,#62483,#62533, + #62583,#62602,#62619,#62644,#62669,#62718,#62735,#62759,#62776, + #62800,#62825,#62849,#62867,#62889,#62901,#62913,#62935,#62947, + #63048,#63079,#63180,#63192,#63223,#63281,#63316,#63333,#63350, + #63379,#63408,#63425,#63442,#63465,#63489,#63513,#63538,#63562, + #63580,#63594,#63608,#63630,#63647,#63671,#63688,#63705,#63722, + #63739,#63763,#63780,#63802,#63814,#63847,#63871,#63895,#63928, + #63945,#63970,#63987,#64012,#64043,#64068,#64093,#64124,#64141, + #64183,#64200,#64242,#64267,#64301,#64343,#64360,#64377,#64394, + #64406,#64423,#64440)); +#60398 = ADVANCED_FACE('',(#60399),#60517,.F.); +#60399 = FACE_BOUND('',#60400,.F.); +#60400 = EDGE_LOOP('',(#60401,#60411,#60420,#60428,#60437,#60445,#60454, + #60462,#60471,#60479,#60487,#60495,#60503,#60511)); +#60401 = ORIENTED_EDGE('',*,*,#60402,.T.); +#60402 = EDGE_CURVE('',#60403,#60405,#60407,.T.); +#60403 = VERTEX_POINT('',#60404); +#60404 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60405 = VERTEX_POINT('',#60406); +#60406 = CARTESIAN_POINT('',(-0.85,-1.73,0.1)); +#60407 = LINE('',#60408,#60409); +#60408 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60409 = VECTOR('',#60410,1.); +#60410 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60411 = ORIENTED_EDGE('',*,*,#60412,.T.); +#60412 = EDGE_CURVE('',#60405,#60413,#60415,.T.); +#60413 = VERTEX_POINT('',#60414); +#60414 = CARTESIAN_POINT('',(-0.7,-1.73,0.25)); +#60415 = CIRCLE('',#60416,0.15); +#60416 = AXIS2_PLACEMENT_3D('',#60417,#60418,#60419); +#60417 = CARTESIAN_POINT('',(-0.85,-1.73,0.25)); +#60418 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60419 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60420 = ORIENTED_EDGE('',*,*,#60421,.T.); +#60421 = EDGE_CURVE('',#60413,#60422,#60424,.T.); +#60422 = VERTEX_POINT('',#60423); +#60423 = CARTESIAN_POINT('',(-0.7,-1.73,0.45)); +#60424 = LINE('',#60425,#60426); +#60425 = CARTESIAN_POINT('',(-0.7,-1.73,0.275)); +#60426 = VECTOR('',#60427,1.); +#60427 = DIRECTION('',(-2.2E-16,1.22E-15,1.)); +#60428 = ORIENTED_EDGE('',*,*,#60429,.T.); +#60429 = EDGE_CURVE('',#60422,#60430,#60432,.T.); +#60430 = VERTEX_POINT('',#60431); +#60431 = CARTESIAN_POINT('',(-0.55,-1.73,0.6)); +#60432 = CIRCLE('',#60433,0.15); +#60433 = AXIS2_PLACEMENT_3D('',#60434,#60435,#60436); +#60434 = CARTESIAN_POINT('',(-0.55,-1.73,0.45)); +#60435 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60436 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60437 = ORIENTED_EDGE('',*,*,#60438,.F.); +#60438 = EDGE_CURVE('',#60439,#60430,#60441,.T.); +#60439 = VERTEX_POINT('',#60440); +#60440 = CARTESIAN_POINT('',(0.55,-1.73,0.6)); +#60441 = LINE('',#60442,#60443); +#60442 = CARTESIAN_POINT('',(-1.6125,-1.73,0.6)); +#60443 = VECTOR('',#60444,1.); +#60444 = DIRECTION('',(-1.,4.4E-16,0.)); +#60445 = ORIENTED_EDGE('',*,*,#60446,.T.); +#60446 = EDGE_CURVE('',#60439,#60447,#60449,.T.); +#60447 = VERTEX_POINT('',#60448); +#60448 = CARTESIAN_POINT('',(0.7,-1.73,0.45)); +#60449 = CIRCLE('',#60450,0.15); +#60450 = AXIS2_PLACEMENT_3D('',#60451,#60452,#60453); +#60451 = CARTESIAN_POINT('',(0.55,-1.73,0.45)); +#60452 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60453 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60454 = ORIENTED_EDGE('',*,*,#60455,.T.); +#60455 = EDGE_CURVE('',#60447,#60456,#60458,.T.); +#60456 = VERTEX_POINT('',#60457); +#60457 = CARTESIAN_POINT('',(0.7,-1.73,0.25)); +#60458 = LINE('',#60459,#60460); +#60459 = CARTESIAN_POINT('',(0.7,-1.73,0.1)); +#60460 = VECTOR('',#60461,1.); +#60461 = DIRECTION('',(2.2E-16,-1.22E-15,-1.)); +#60462 = ORIENTED_EDGE('',*,*,#60463,.F.); +#60463 = EDGE_CURVE('',#60464,#60456,#60466,.T.); +#60464 = VERTEX_POINT('',#60465); +#60465 = CARTESIAN_POINT('',(0.85,-1.73,0.1)); +#60466 = CIRCLE('',#60467,0.15); +#60467 = AXIS2_PLACEMENT_3D('',#60468,#60469,#60470); +#60468 = CARTESIAN_POINT('',(0.85,-1.73,0.25)); +#60469 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#60470 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60471 = ORIENTED_EDGE('',*,*,#60472,.T.); +#60472 = EDGE_CURVE('',#60464,#60473,#60475,.T.); +#60473 = VERTEX_POINT('',#60474); +#60474 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60475 = LINE('',#60476,#60477); +#60476 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60477 = VECTOR('',#60478,1.); +#60478 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60479 = ORIENTED_EDGE('',*,*,#60480,.T.); +#60480 = EDGE_CURVE('',#60473,#60481,#60483,.T.); +#60481 = VERTEX_POINT('',#60482); +#60482 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#60483 = LINE('',#60484,#60485); +#60484 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60485 = VECTOR('',#60486,1.); +#60486 = DIRECTION('',(0.,0.,1.)); +#60487 = ORIENTED_EDGE('',*,*,#60488,.T.); +#60488 = EDGE_CURVE('',#60481,#60489,#60491,.T.); +#60489 = VERTEX_POINT('',#60490); +#60490 = CARTESIAN_POINT('',(2.675,-1.73,1.15)); +#60491 = LINE('',#60492,#60493); +#60492 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60493 = VECTOR('',#60494,1.); +#60494 = DIRECTION('',(0.,0.,1.)); +#60495 = ORIENTED_EDGE('',*,*,#60496,.F.); +#60496 = EDGE_CURVE('',#60497,#60489,#60499,.T.); +#60497 = VERTEX_POINT('',#60498); +#60498 = CARTESIAN_POINT('',(-2.675,-1.73,1.15)); +#60499 = LINE('',#60500,#60501); +#60500 = CARTESIAN_POINT('',(-2.675,-1.73,1.15)); +#60501 = VECTOR('',#60502,1.); +#60502 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60503 = ORIENTED_EDGE('',*,*,#60504,.F.); +#60504 = EDGE_CURVE('',#60505,#60497,#60507,.T.); +#60505 = VERTEX_POINT('',#60506); +#60506 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#60507 = LINE('',#60508,#60509); +#60508 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60509 = VECTOR('',#60510,1.); +#60510 = DIRECTION('',(0.,0.,1.)); +#60511 = ORIENTED_EDGE('',*,*,#60512,.F.); +#60512 = EDGE_CURVE('',#60403,#60505,#60513,.T.); +#60513 = LINE('',#60514,#60515); +#60514 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60515 = VECTOR('',#60516,1.); +#60516 = DIRECTION('',(0.,0.,1.)); +#60517 = PLANE('',#60518); +#60518 = AXIS2_PLACEMENT_3D('',#60519,#60520,#60521); +#60519 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60520 = DIRECTION('',(-4.4E-16,-1.,2.2E-16)); +#60521 = DIRECTION('',(-4.4E-16,2.2E-16,1.)); +#60522 = ADVANCED_FACE('',(#60523),#60548,.F.); +#60523 = FACE_BOUND('',#60524,.F.); +#60524 = EDGE_LOOP('',(#60525,#60526,#60534,#60542)); +#60525 = ORIENTED_EDGE('',*,*,#60402,.F.); +#60526 = ORIENTED_EDGE('',*,*,#60527,.F.); +#60527 = EDGE_CURVE('',#60528,#60403,#60530,.T.); +#60528 = VERTEX_POINT('',#60529); +#60529 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60530 = LINE('',#60531,#60532); +#60531 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60532 = VECTOR('',#60533,1.); +#60533 = DIRECTION('',(0.,1.,0.)); +#60534 = ORIENTED_EDGE('',*,*,#60535,.T.); +#60535 = EDGE_CURVE('',#60528,#60536,#60538,.T.); +#60536 = VERTEX_POINT('',#60537); +#60537 = CARTESIAN_POINT('',(-0.85,-1.85,0.1)); +#60538 = LINE('',#60539,#60540); +#60539 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60540 = VECTOR('',#60541,1.); +#60541 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60542 = ORIENTED_EDGE('',*,*,#60543,.F.); +#60543 = EDGE_CURVE('',#60405,#60536,#60544,.T.); +#60544 = LINE('',#60545,#60546); +#60545 = CARTESIAN_POINT('',(-0.85,-1.73,0.1)); +#60546 = VECTOR('',#60547,1.); +#60547 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60548 = PLANE('',#60549); +#60549 = AXIS2_PLACEMENT_3D('',#60550,#60551,#60552); +#60550 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60551 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#60552 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#60553 = ADVANCED_FACE('',(#60554),#60573,.T.); +#60554 = FACE_BOUND('',#60555,.T.); +#60555 = EDGE_LOOP('',(#60556,#60557,#60565,#60572)); +#60556 = ORIENTED_EDGE('',*,*,#60412,.T.); +#60557 = ORIENTED_EDGE('',*,*,#60558,.T.); +#60558 = EDGE_CURVE('',#60413,#60559,#60561,.T.); +#60559 = VERTEX_POINT('',#60560); +#60560 = CARTESIAN_POINT('',(-0.7,-1.85,0.25)); +#60561 = LINE('',#60562,#60563); +#60562 = CARTESIAN_POINT('',(-0.7,-1.73,0.25)); +#60563 = VECTOR('',#60564,1.); +#60564 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60565 = ORIENTED_EDGE('',*,*,#60566,.F.); +#60566 = EDGE_CURVE('',#60536,#60559,#60567,.T.); +#60567 = CIRCLE('',#60568,0.15); +#60568 = AXIS2_PLACEMENT_3D('',#60569,#60570,#60571); +#60569 = CARTESIAN_POINT('',(-0.85,-1.85,0.25)); +#60570 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60571 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60572 = ORIENTED_EDGE('',*,*,#60543,.F.); +#60573 = CYLINDRICAL_SURFACE('',#60574,0.15); +#60574 = AXIS2_PLACEMENT_3D('',#60575,#60576,#60577); +#60575 = CARTESIAN_POINT('',(-0.85,-1.73,0.25)); +#60576 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60577 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#60578 = ADVANCED_FACE('',(#60579),#60604,.T.); +#60579 = FACE_BOUND('',#60580,.T.); +#60580 = EDGE_LOOP('',(#60581,#60589,#60597,#60603)); +#60581 = ORIENTED_EDGE('',*,*,#60582,.F.); +#60582 = EDGE_CURVE('',#60583,#60403,#60585,.T.); +#60583 = VERTEX_POINT('',#60584); +#60584 = CARTESIAN_POINT('',(-2.725,-1.73,0.1)); +#60585 = LINE('',#60586,#60587); +#60586 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60587 = VECTOR('',#60588,1.); +#60588 = DIRECTION('',(1.,-4.4E-16,6.1E-16)); +#60589 = ORIENTED_EDGE('',*,*,#60590,.T.); +#60590 = EDGE_CURVE('',#60583,#60591,#60593,.T.); +#60591 = VERTEX_POINT('',#60592); +#60592 = CARTESIAN_POINT('',(-2.725,-1.73,0.66)); +#60593 = LINE('',#60594,#60595); +#60594 = CARTESIAN_POINT('',(-2.725,-1.73,0.1)); +#60595 = VECTOR('',#60596,1.); +#60596 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#60597 = ORIENTED_EDGE('',*,*,#60598,.T.); +#60598 = EDGE_CURVE('',#60591,#60505,#60599,.T.); +#60599 = LINE('',#60600,#60601); +#60600 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#60601 = VECTOR('',#60602,1.); +#60602 = DIRECTION('',(1.,-4.4E-16,6.1E-16)); +#60603 = ORIENTED_EDGE('',*,*,#60512,.F.); +#60604 = PLANE('',#60605); +#60605 = AXIS2_PLACEMENT_3D('',#60606,#60607,#60608); +#60606 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60607 = DIRECTION('',(4.4E-16,1.,-1.E-15)); +#60608 = DIRECTION('',(-3.3E-16,1.E-15,1.)); +#60609 = ADVANCED_FACE('',(#60610),#60628,.T.); +#60610 = FACE_BOUND('',#60611,.T.); +#60611 = EDGE_LOOP('',(#60612,#60613,#60621,#60627)); +#60612 = ORIENTED_EDGE('',*,*,#60421,.T.); +#60613 = ORIENTED_EDGE('',*,*,#60614,.T.); +#60614 = EDGE_CURVE('',#60422,#60615,#60617,.T.); +#60615 = VERTEX_POINT('',#60616); +#60616 = CARTESIAN_POINT('',(-0.7,-1.85,0.45)); +#60617 = LINE('',#60618,#60619); +#60618 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#60619 = VECTOR('',#60620,1.); +#60620 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60621 = ORIENTED_EDGE('',*,*,#60622,.T.); +#60622 = EDGE_CURVE('',#60615,#60559,#60623,.T.); +#60623 = LINE('',#60624,#60625); +#60624 = CARTESIAN_POINT('',(-0.7,-1.85,0.885)); +#60625 = VECTOR('',#60626,1.); +#60626 = DIRECTION('',(2.2E-16,-1.22E-15,-1.)); +#60627 = ORIENTED_EDGE('',*,*,#60558,.F.); +#60628 = PLANE('',#60629); +#60629 = AXIS2_PLACEMENT_3D('',#60630,#60631,#60632); +#60630 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#60631 = DIRECTION('',(1.,-5.E-16,2.2E-16)); +#60632 = DIRECTION('',(2.2E-16,-9.4E-16,-1.)); +#60633 = ADVANCED_FACE('',(#60634),#60693,.F.); +#60634 = FACE_BOUND('',#60635,.F.); +#60635 = EDGE_LOOP('',(#60636,#60637,#60646,#60654,#60662,#60670,#60679, + #60687)); +#60636 = ORIENTED_EDGE('',*,*,#60504,.T.); +#60637 = ORIENTED_EDGE('',*,*,#60638,.F.); +#60638 = EDGE_CURVE('',#60639,#60497,#60641,.T.); +#60639 = VERTEX_POINT('',#60640); +#60640 = CARTESIAN_POINT('',(-2.675,-1.68,1.2)); +#60641 = CIRCLE('',#60642,5.E-02); +#60642 = AXIS2_PLACEMENT_3D('',#60643,#60644,#60645); +#60643 = CARTESIAN_POINT('',(-2.675,-1.68,1.15)); +#60644 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60645 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60646 = ORIENTED_EDGE('',*,*,#60647,.T.); +#60647 = EDGE_CURVE('',#60639,#60648,#60650,.T.); +#60648 = VERTEX_POINT('',#60649); +#60649 = CARTESIAN_POINT('',(-2.675,-0.675,1.2)); +#60650 = LINE('',#60651,#60652); +#60651 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#60652 = VECTOR('',#60653,1.); +#60653 = DIRECTION('',(0.,1.,0.)); +#60654 = ORIENTED_EDGE('',*,*,#60655,.T.); +#60655 = EDGE_CURVE('',#60648,#60656,#60658,.T.); +#60656 = VERTEX_POINT('',#60657); +#60657 = CARTESIAN_POINT('',(-2.675,-0.675,1.32)); +#60658 = LINE('',#60659,#60660); +#60659 = CARTESIAN_POINT('',(-2.675,-0.675,1.2)); +#60660 = VECTOR('',#60661,1.); +#60661 = DIRECTION('',(6.E-17,-1.1E-16,1.)); +#60662 = ORIENTED_EDGE('',*,*,#60663,.T.); +#60663 = EDGE_CURVE('',#60656,#60664,#60666,.T.); +#60664 = VERTEX_POINT('',#60665); +#60665 = CARTESIAN_POINT('',(-2.675,-1.7,1.32)); +#60666 = LINE('',#60667,#60668); +#60667 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#60668 = VECTOR('',#60669,1.); +#60669 = DIRECTION('',(0.,-1.,0.)); +#60670 = ORIENTED_EDGE('',*,*,#60671,.T.); +#60671 = EDGE_CURVE('',#60664,#60672,#60674,.T.); +#60672 = VERTEX_POINT('',#60673); +#60673 = CARTESIAN_POINT('',(-2.675,-1.85,1.17)); +#60674 = CIRCLE('',#60675,0.15); +#60675 = AXIS2_PLACEMENT_3D('',#60676,#60677,#60678); +#60676 = CARTESIAN_POINT('',(-2.675,-1.7,1.17)); +#60677 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60678 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60679 = ORIENTED_EDGE('',*,*,#60680,.T.); +#60680 = EDGE_CURVE('',#60672,#60681,#60683,.T.); +#60681 = VERTEX_POINT('',#60682); +#60682 = CARTESIAN_POINT('',(-2.675,-1.85,0.66)); +#60683 = LINE('',#60684,#60685); +#60684 = CARTESIAN_POINT('',(-2.675,-1.85,1.32)); +#60685 = VECTOR('',#60686,1.); +#60686 = DIRECTION('',(0.,0.,-1.)); +#60687 = ORIENTED_EDGE('',*,*,#60688,.F.); +#60688 = EDGE_CURVE('',#60505,#60681,#60689,.T.); +#60689 = LINE('',#60690,#60691); +#60690 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#60691 = VECTOR('',#60692,1.); +#60692 = DIRECTION('',(-4.4E-16,-1.,7.8E-16)); +#60693 = PLANE('',#60694); +#60694 = AXIS2_PLACEMENT_3D('',#60695,#60696,#60697); +#60695 = CARTESIAN_POINT('',(-2.675,1.17E-15,1.015149501661)); +#60696 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#60697 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#60698 = ADVANCED_FACE('',(#60699),#60718,.F.); +#60699 = FACE_BOUND('',#60700,.F.); +#60700 = EDGE_LOOP('',(#60701,#60702,#60703,#60712)); +#60701 = ORIENTED_EDGE('',*,*,#60429,.F.); +#60702 = ORIENTED_EDGE('',*,*,#60614,.T.); +#60703 = ORIENTED_EDGE('',*,*,#60704,.T.); +#60704 = EDGE_CURVE('',#60615,#60705,#60707,.T.); +#60705 = VERTEX_POINT('',#60706); +#60706 = CARTESIAN_POINT('',(-0.55,-1.85,0.6)); +#60707 = CIRCLE('',#60708,0.15); +#60708 = AXIS2_PLACEMENT_3D('',#60709,#60710,#60711); +#60709 = CARTESIAN_POINT('',(-0.55,-1.85,0.45)); +#60710 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60711 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60712 = ORIENTED_EDGE('',*,*,#60713,.F.); +#60713 = EDGE_CURVE('',#60430,#60705,#60714,.T.); +#60714 = LINE('',#60715,#60716); +#60715 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#60716 = VECTOR('',#60717,1.); +#60717 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60718 = CYLINDRICAL_SURFACE('',#60719,0.15); +#60719 = AXIS2_PLACEMENT_3D('',#60720,#60721,#60722); +#60720 = CARTESIAN_POINT('',(-0.55,1.85,0.45)); +#60721 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60722 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60723 = ADVANCED_FACE('',(#60724),#60743,.F.); +#60724 = FACE_BOUND('',#60725,.F.); +#60725 = EDGE_LOOP('',(#60726,#60727,#60728,#60737)); +#60726 = ORIENTED_EDGE('',*,*,#60638,.T.); +#60727 = ORIENTED_EDGE('',*,*,#60496,.T.); +#60728 = ORIENTED_EDGE('',*,*,#60729,.F.); +#60729 = EDGE_CURVE('',#60730,#60489,#60732,.T.); +#60730 = VERTEX_POINT('',#60731); +#60731 = CARTESIAN_POINT('',(2.675,-1.68,1.2)); +#60732 = CIRCLE('',#60733,5.E-02); +#60733 = AXIS2_PLACEMENT_3D('',#60734,#60735,#60736); +#60734 = CARTESIAN_POINT('',(2.675,-1.68,1.15)); +#60735 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60736 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60737 = ORIENTED_EDGE('',*,*,#60738,.F.); +#60738 = EDGE_CURVE('',#60639,#60730,#60739,.T.); +#60739 = LINE('',#60740,#60741); +#60740 = CARTESIAN_POINT('',(-2.675,-1.68,1.2)); +#60741 = VECTOR('',#60742,1.); +#60742 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60743 = CYLINDRICAL_SURFACE('',#60744,5.E-02); +#60744 = AXIS2_PLACEMENT_3D('',#60745,#60746,#60747); +#60745 = CARTESIAN_POINT('',(-2.675,-1.68,1.15)); +#60746 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60747 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#60748 = ADVANCED_FACE('',(#60749),#60767,.F.); +#60749 = FACE_BOUND('',#60750,.F.); +#60750 = EDGE_LOOP('',(#60751,#60752,#60753,#60761)); +#60751 = ORIENTED_EDGE('',*,*,#60438,.T.); +#60752 = ORIENTED_EDGE('',*,*,#60713,.T.); +#60753 = ORIENTED_EDGE('',*,*,#60754,.T.); +#60754 = EDGE_CURVE('',#60705,#60755,#60757,.T.); +#60755 = VERTEX_POINT('',#60756); +#60756 = CARTESIAN_POINT('',(0.55,-1.85,0.6)); +#60757 = LINE('',#60758,#60759); +#60758 = CARTESIAN_POINT('',(-1.6125,-1.85,0.6)); +#60759 = VECTOR('',#60760,1.); +#60760 = DIRECTION('',(1.,-4.4E-16,0.)); +#60761 = ORIENTED_EDGE('',*,*,#60762,.F.); +#60762 = EDGE_CURVE('',#60439,#60755,#60763,.T.); +#60763 = LINE('',#60764,#60765); +#60764 = CARTESIAN_POINT('',(0.55,1.85,0.6)); +#60765 = VECTOR('',#60766,1.); +#60766 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60767 = PLANE('',#60768); +#60768 = AXIS2_PLACEMENT_3D('',#60769,#60770,#60771); +#60769 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#60770 = DIRECTION('',(0.,1.17E-15,1.)); +#60771 = DIRECTION('',(1.,-6.7E-16,7.839E-31)); +#60772 = ADVANCED_FACE('',(#60773),#60824,.T.); +#60773 = FACE_BOUND('',#60774,.T.); +#60774 = EDGE_LOOP('',(#60775,#60783,#60791,#60799,#60808,#60816,#60822, + #60823)); +#60775 = ORIENTED_EDGE('',*,*,#60776,.T.); +#60776 = EDGE_CURVE('',#60730,#60777,#60779,.T.); +#60777 = VERTEX_POINT('',#60778); +#60778 = CARTESIAN_POINT('',(2.675,-0.675,1.2)); +#60779 = LINE('',#60780,#60781); +#60780 = CARTESIAN_POINT('',(2.675,-1.73,1.2)); +#60781 = VECTOR('',#60782,1.); +#60782 = DIRECTION('',(0.,1.,0.)); +#60783 = ORIENTED_EDGE('',*,*,#60784,.T.); +#60784 = EDGE_CURVE('',#60777,#60785,#60787,.T.); +#60785 = VERTEX_POINT('',#60786); +#60786 = CARTESIAN_POINT('',(2.675,-0.675,1.32)); +#60787 = LINE('',#60788,#60789); +#60788 = CARTESIAN_POINT('',(2.675,-0.675,1.2)); +#60789 = VECTOR('',#60790,1.); +#60790 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#60791 = ORIENTED_EDGE('',*,*,#60792,.T.); +#60792 = EDGE_CURVE('',#60785,#60793,#60795,.T.); +#60793 = VERTEX_POINT('',#60794); +#60794 = CARTESIAN_POINT('',(2.675,-1.7,1.32)); +#60795 = LINE('',#60796,#60797); +#60796 = CARTESIAN_POINT('',(2.675,1.85,1.32)); +#60797 = VECTOR('',#60798,1.); +#60798 = DIRECTION('',(0.,-1.,0.)); +#60799 = ORIENTED_EDGE('',*,*,#60800,.T.); +#60800 = EDGE_CURVE('',#60793,#60801,#60803,.T.); +#60801 = VERTEX_POINT('',#60802); +#60802 = CARTESIAN_POINT('',(2.675,-1.85,1.17)); +#60803 = CIRCLE('',#60804,0.15); +#60804 = AXIS2_PLACEMENT_3D('',#60805,#60806,#60807); +#60805 = CARTESIAN_POINT('',(2.675,-1.7,1.17)); +#60806 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60807 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60808 = ORIENTED_EDGE('',*,*,#60809,.T.); +#60809 = EDGE_CURVE('',#60801,#60810,#60812,.T.); +#60810 = VERTEX_POINT('',#60811); +#60811 = CARTESIAN_POINT('',(2.675,-1.85,0.66)); +#60812 = LINE('',#60813,#60814); +#60813 = CARTESIAN_POINT('',(2.675,-1.85,1.32)); +#60814 = VECTOR('',#60815,1.); +#60815 = DIRECTION('',(0.,0.,-1.)); +#60816 = ORIENTED_EDGE('',*,*,#60817,.F.); +#60817 = EDGE_CURVE('',#60481,#60810,#60818,.T.); +#60818 = LINE('',#60819,#60820); +#60819 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#60820 = VECTOR('',#60821,1.); +#60821 = DIRECTION('',(-8.9E-16,-1.,4.4E-16)); +#60822 = ORIENTED_EDGE('',*,*,#60488,.T.); +#60823 = ORIENTED_EDGE('',*,*,#60729,.F.); +#60824 = PLANE('',#60825); +#60825 = AXIS2_PLACEMENT_3D('',#60826,#60827,#60828); +#60826 = CARTESIAN_POINT('',(2.675,-8.3E-16,1.015149501661)); +#60827 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#60828 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#60829 = ADVANCED_FACE('',(#60830),#60849,.F.); +#60830 = FACE_BOUND('',#60831,.F.); +#60831 = EDGE_LOOP('',(#60832,#60833,#60834,#60843)); +#60832 = ORIENTED_EDGE('',*,*,#60446,.F.); +#60833 = ORIENTED_EDGE('',*,*,#60762,.T.); +#60834 = ORIENTED_EDGE('',*,*,#60835,.T.); +#60835 = EDGE_CURVE('',#60755,#60836,#60838,.T.); +#60836 = VERTEX_POINT('',#60837); +#60837 = CARTESIAN_POINT('',(0.7,-1.85,0.45)); +#60838 = CIRCLE('',#60839,0.15); +#60839 = AXIS2_PLACEMENT_3D('',#60840,#60841,#60842); +#60840 = CARTESIAN_POINT('',(0.55,-1.85,0.45)); +#60841 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60842 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60843 = ORIENTED_EDGE('',*,*,#60844,.F.); +#60844 = EDGE_CURVE('',#60447,#60836,#60845,.T.); +#60845 = LINE('',#60846,#60847); +#60846 = CARTESIAN_POINT('',(0.7,1.85,0.45)); +#60847 = VECTOR('',#60848,1.); +#60848 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60849 = CYLINDRICAL_SURFACE('',#60850,0.15); +#60850 = AXIS2_PLACEMENT_3D('',#60851,#60852,#60853); +#60851 = CARTESIAN_POINT('',(0.55,1.85,0.45)); +#60852 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60853 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60854 = ADVANCED_FACE('',(#60855),#60880,.T.); +#60855 = FACE_BOUND('',#60856,.F.); +#60856 = EDGE_LOOP('',(#60857,#60865,#60873,#60879)); +#60857 = ORIENTED_EDGE('',*,*,#60858,.F.); +#60858 = EDGE_CURVE('',#60859,#60473,#60861,.T.); +#60859 = VERTEX_POINT('',#60860); +#60860 = CARTESIAN_POINT('',(2.725,-1.73,0.1)); +#60861 = LINE('',#60862,#60863); +#60862 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60863 = VECTOR('',#60864,1.); +#60864 = DIRECTION('',(-1.,8.9E-16,-1.7E-16)); +#60865 = ORIENTED_EDGE('',*,*,#60866,.T.); +#60866 = EDGE_CURVE('',#60859,#60867,#60869,.T.); +#60867 = VERTEX_POINT('',#60868); +#60868 = CARTESIAN_POINT('',(2.725,-1.73,0.66)); +#60869 = LINE('',#60870,#60871); +#60870 = CARTESIAN_POINT('',(2.725,-1.73,0.1)); +#60871 = VECTOR('',#60872,1.); +#60872 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#60873 = ORIENTED_EDGE('',*,*,#60874,.T.); +#60874 = EDGE_CURVE('',#60867,#60481,#60875,.T.); +#60875 = LINE('',#60876,#60877); +#60876 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#60877 = VECTOR('',#60878,1.); +#60878 = DIRECTION('',(-1.,8.9E-16,-1.7E-16)); +#60879 = ORIENTED_EDGE('',*,*,#60480,.F.); +#60880 = PLANE('',#60881); +#60881 = AXIS2_PLACEMENT_3D('',#60882,#60883,#60884); +#60882 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60883 = DIRECTION('',(8.9E-16,1.,-6.7E-16)); +#60884 = DIRECTION('',(8.9E-16,-6.7E-16,-1.)); +#60885 = ADVANCED_FACE('',(#60886),#60904,.T.); +#60886 = FACE_BOUND('',#60887,.T.); +#60887 = EDGE_LOOP('',(#60888,#60889,#60897,#60903)); +#60888 = ORIENTED_EDGE('',*,*,#60455,.T.); +#60889 = ORIENTED_EDGE('',*,*,#60890,.T.); +#60890 = EDGE_CURVE('',#60456,#60891,#60893,.T.); +#60891 = VERTEX_POINT('',#60892); +#60892 = CARTESIAN_POINT('',(0.7,-1.85,0.25)); +#60893 = LINE('',#60894,#60895); +#60894 = CARTESIAN_POINT('',(0.7,-1.73,0.25)); +#60895 = VECTOR('',#60896,1.); +#60896 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60897 = ORIENTED_EDGE('',*,*,#60898,.T.); +#60898 = EDGE_CURVE('',#60891,#60836,#60899,.T.); +#60899 = LINE('',#60900,#60901); +#60900 = CARTESIAN_POINT('',(0.7,-1.85,0.71)); +#60901 = VECTOR('',#60902,1.); +#60902 = DIRECTION('',(-2.2E-16,1.22E-15,1.)); +#60903 = ORIENTED_EDGE('',*,*,#60844,.F.); +#60904 = PLANE('',#60905); +#60905 = AXIS2_PLACEMENT_3D('',#60906,#60907,#60908); +#60906 = CARTESIAN_POINT('',(0.7,1.85,0.1)); +#60907 = DIRECTION('',(-1.,5.E-16,-2.2E-16)); +#60908 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60909 = ADVANCED_FACE('',(#60910),#60935,.F.); +#60910 = FACE_BOUND('',#60911,.F.); +#60911 = EDGE_LOOP('',(#60912,#60913,#60921,#60929)); +#60912 = ORIENTED_EDGE('',*,*,#60472,.F.); +#60913 = ORIENTED_EDGE('',*,*,#60914,.T.); +#60914 = EDGE_CURVE('',#60464,#60915,#60917,.T.); +#60915 = VERTEX_POINT('',#60916); +#60916 = CARTESIAN_POINT('',(0.85,-1.85,0.1)); +#60917 = LINE('',#60918,#60919); +#60918 = CARTESIAN_POINT('',(0.85,-1.73,0.1)); +#60919 = VECTOR('',#60920,1.); +#60920 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60921 = ORIENTED_EDGE('',*,*,#60922,.T.); +#60922 = EDGE_CURVE('',#60915,#60923,#60925,.T.); +#60923 = VERTEX_POINT('',#60924); +#60924 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#60925 = LINE('',#60926,#60927); +#60926 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60927 = VECTOR('',#60928,1.); +#60928 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60929 = ORIENTED_EDGE('',*,*,#60930,.T.); +#60930 = EDGE_CURVE('',#60923,#60473,#60931,.T.); +#60931 = LINE('',#60932,#60933); +#60932 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#60933 = VECTOR('',#60934,1.); +#60934 = DIRECTION('',(0.,1.,0.)); +#60935 = PLANE('',#60936); +#60936 = AXIS2_PLACEMENT_3D('',#60937,#60938,#60939); +#60937 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60938 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#60939 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#60940 = ADVANCED_FACE('',(#60941),#60953,.T.); +#60941 = FACE_BOUND('',#60942,.T.); +#60942 = EDGE_LOOP('',(#60943,#60944,#60951,#60952)); +#60943 = ORIENTED_EDGE('',*,*,#60914,.T.); +#60944 = ORIENTED_EDGE('',*,*,#60945,.T.); +#60945 = EDGE_CURVE('',#60915,#60891,#60946,.T.); +#60946 = CIRCLE('',#60947,0.15); +#60947 = AXIS2_PLACEMENT_3D('',#60948,#60949,#60950); +#60948 = CARTESIAN_POINT('',(0.85,-1.85,0.25)); +#60949 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#60950 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60951 = ORIENTED_EDGE('',*,*,#60890,.F.); +#60952 = ORIENTED_EDGE('',*,*,#60463,.F.); +#60953 = CYLINDRICAL_SURFACE('',#60954,0.15); +#60954 = AXIS2_PLACEMENT_3D('',#60955,#60956,#60957); +#60955 = CARTESIAN_POINT('',(0.85,-1.73,0.25)); +#60956 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60957 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#60958 = ADVANCED_FACE('',(#60959),#60977,.T.); +#60959 = FACE_BOUND('',#60960,.T.); +#60960 = EDGE_LOOP('',(#60961,#60969,#60975,#60976)); +#60961 = ORIENTED_EDGE('',*,*,#60962,.F.); +#60962 = EDGE_CURVE('',#60963,#60528,#60965,.T.); +#60963 = VERTEX_POINT('',#60964); +#60964 = CARTESIAN_POINT('',(-2.725,-1.85,0.1)); +#60965 = LINE('',#60966,#60967); +#60966 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60967 = VECTOR('',#60968,1.); +#60968 = DIRECTION('',(1.,-4.4E-16,3.3E-16)); +#60969 = ORIENTED_EDGE('',*,*,#60970,.T.); +#60970 = EDGE_CURVE('',#60963,#60583,#60971,.T.); +#60971 = LINE('',#60972,#60973); +#60972 = CARTESIAN_POINT('',(-2.725,-1.85,0.1)); +#60973 = VECTOR('',#60974,1.); +#60974 = DIRECTION('',(4.4E-16,1.,-8.E-17)); +#60975 = ORIENTED_EDGE('',*,*,#60582,.T.); +#60976 = ORIENTED_EDGE('',*,*,#60527,.F.); +#60977 = PLANE('',#60978); +#60978 = AXIS2_PLACEMENT_3D('',#60979,#60980,#60981); +#60979 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60980 = DIRECTION('',(6.1E-16,-8.E-17,-1.)); +#60981 = DIRECTION('',(4.4E-16,1.,-8.E-17)); +#60982 = ADVANCED_FACE('',(#60983),#61014,.F.); +#60983 = FACE_BOUND('',#60984,.F.); +#60984 = EDGE_LOOP('',(#60985,#60986,#60992,#60993,#60999,#61000,#61006, + #61007,#61008,#61009,#61010,#61011,#61012,#61013)); +#60985 = ORIENTED_EDGE('',*,*,#60535,.F.); +#60986 = ORIENTED_EDGE('',*,*,#60987,.F.); +#60987 = EDGE_CURVE('',#60681,#60528,#60988,.T.); +#60988 = LINE('',#60989,#60990); +#60989 = CARTESIAN_POINT('',(-2.675,-1.85,1.32)); +#60990 = VECTOR('',#60991,1.); +#60991 = DIRECTION('',(0.,0.,-1.)); +#60992 = ORIENTED_EDGE('',*,*,#60680,.F.); +#60993 = ORIENTED_EDGE('',*,*,#60994,.T.); +#60994 = EDGE_CURVE('',#60672,#60801,#60995,.T.); +#60995 = LINE('',#60996,#60997); +#60996 = CARTESIAN_POINT('',(-2.675,-1.85,1.17)); +#60997 = VECTOR('',#60998,1.); +#60998 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60999 = ORIENTED_EDGE('',*,*,#60809,.T.); +#61000 = ORIENTED_EDGE('',*,*,#61001,.T.); +#61001 = EDGE_CURVE('',#60810,#60923,#61002,.T.); +#61002 = LINE('',#61003,#61004); +#61003 = CARTESIAN_POINT('',(2.675,-1.85,1.32)); +#61004 = VECTOR('',#61005,1.); +#61005 = DIRECTION('',(0.,0.,-1.)); +#61006 = ORIENTED_EDGE('',*,*,#60922,.F.); +#61007 = ORIENTED_EDGE('',*,*,#60945,.T.); +#61008 = ORIENTED_EDGE('',*,*,#60898,.T.); +#61009 = ORIENTED_EDGE('',*,*,#60835,.F.); +#61010 = ORIENTED_EDGE('',*,*,#60754,.F.); +#61011 = ORIENTED_EDGE('',*,*,#60704,.F.); +#61012 = ORIENTED_EDGE('',*,*,#60622,.T.); +#61013 = ORIENTED_EDGE('',*,*,#60566,.F.); +#61014 = PLANE('',#61015); +#61015 = AXIS2_PLACEMENT_3D('',#61016,#61017,#61018); +#61016 = CARTESIAN_POINT('',(-2.675,-1.85,1.32)); +#61017 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#61018 = DIRECTION('',(4.4E-16,-2.2E-16,-1.)); +#61019 = ADVANCED_FACE('',(#61020),#61047,.F.); +#61020 = FACE_BOUND('',#61021,.F.); +#61021 = EDGE_LOOP('',(#61022,#61031,#61032,#61041)); +#61022 = ORIENTED_EDGE('',*,*,#61023,.T.); +#61023 = EDGE_CURVE('',#61024,#60583,#61026,.T.); +#61024 = VERTEX_POINT('',#61025); +#61025 = CARTESIAN_POINT('',(-2.775,-1.68,0.1)); +#61026 = CIRCLE('',#61027,5.E-02); +#61027 = AXIS2_PLACEMENT_3D('',#61028,#61029,#61030); +#61028 = CARTESIAN_POINT('',(-2.725,-1.68,0.1)); +#61029 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61030 = DIRECTION('',(-8.88E-15,-1.,1.7E-16)); +#61031 = ORIENTED_EDGE('',*,*,#60590,.T.); +#61032 = ORIENTED_EDGE('',*,*,#61033,.F.); +#61033 = EDGE_CURVE('',#61034,#60591,#61036,.T.); +#61034 = VERTEX_POINT('',#61035); +#61035 = CARTESIAN_POINT('',(-2.775,-1.68,0.66)); +#61036 = CIRCLE('',#61037,5.E-02); +#61037 = AXIS2_PLACEMENT_3D('',#61038,#61039,#61040); +#61038 = CARTESIAN_POINT('',(-2.725,-1.68,0.66)); +#61039 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61040 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#61041 = ORIENTED_EDGE('',*,*,#61042,.F.); +#61042 = EDGE_CURVE('',#61024,#61034,#61043,.T.); +#61043 = LINE('',#61044,#61045); +#61044 = CARTESIAN_POINT('',(-2.775,-1.68,0.1)); +#61045 = VECTOR('',#61046,1.); +#61046 = DIRECTION('',(1.7E-16,-5.E-17,1.)); +#61047 = CYLINDRICAL_SURFACE('',#61048,5.E-02); +#61048 = AXIS2_PLACEMENT_3D('',#61049,#61050,#61051); +#61049 = CARTESIAN_POINT('',(-2.725,-1.68,0.1)); +#61050 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61051 = DIRECTION('',(-8.88E-15,-1.,1.7E-16)); +#61052 = ADVANCED_FACE('',(#61053),#61071,.T.); +#61053 = FACE_BOUND('',#61054,.T.); +#61054 = EDGE_LOOP('',(#61055,#61056,#61064,#61070)); +#61055 = ORIENTED_EDGE('',*,*,#60598,.F.); +#61056 = ORIENTED_EDGE('',*,*,#61057,.T.); +#61057 = EDGE_CURVE('',#60591,#61058,#61060,.T.); +#61058 = VERTEX_POINT('',#61059); +#61059 = CARTESIAN_POINT('',(-2.725,-1.85,0.66)); +#61060 = LINE('',#61061,#61062); +#61061 = CARTESIAN_POINT('',(-2.725,-1.73,0.66)); +#61062 = VECTOR('',#61063,1.); +#61063 = DIRECTION('',(-4.4E-16,-1.,7.8E-16)); +#61064 = ORIENTED_EDGE('',*,*,#61065,.T.); +#61065 = EDGE_CURVE('',#61058,#60681,#61066,.T.); +#61066 = LINE('',#61067,#61068); +#61067 = CARTESIAN_POINT('',(-2.675,-1.85,0.66)); +#61068 = VECTOR('',#61069,1.); +#61069 = DIRECTION('',(1.,-4.4E-16,6.1E-16)); +#61070 = ORIENTED_EDGE('',*,*,#60688,.F.); +#61071 = PLANE('',#61072); +#61072 = AXIS2_PLACEMENT_3D('',#61073,#61074,#61075); +#61073 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#61074 = DIRECTION('',(-6.1E-16,7.8E-16,1.)); +#61075 = DIRECTION('',(-4.4E-16,-1.,7.8E-16)); +#61076 = ADVANCED_FACE('',(#61077,#61152),#61222,.F.); +#61077 = FACE_BOUND('',#61078,.F.); +#61078 = EDGE_LOOP('',(#61079,#61080,#61088,#61096,#61104,#61112,#61120, + #61128,#61136,#61144,#61150,#61151)); +#61079 = ORIENTED_EDGE('',*,*,#60776,.T.); +#61080 = ORIENTED_EDGE('',*,*,#61081,.F.); +#61081 = EDGE_CURVE('',#61082,#60777,#61084,.T.); +#61082 = VERTEX_POINT('',#61083); +#61083 = CARTESIAN_POINT('',(2.675,-0.525,1.2)); +#61084 = LINE('',#61085,#61086); +#61085 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61086 = VECTOR('',#61087,1.); +#61087 = DIRECTION('',(-6.7E-16,-1.,3.3E-16)); +#61088 = ORIENTED_EDGE('',*,*,#61089,.F.); +#61089 = EDGE_CURVE('',#61090,#61082,#61092,.T.); +#61090 = VERTEX_POINT('',#61091); +#61091 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61092 = LINE('',#61093,#61094); +#61093 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61094 = VECTOR('',#61095,1.); +#61095 = DIRECTION('',(-1.E-15,-1.,-1.E-30)); +#61096 = ORIENTED_EDGE('',*,*,#61097,.F.); +#61097 = EDGE_CURVE('',#61098,#61090,#61100,.T.); +#61098 = VERTEX_POINT('',#61099); +#61099 = CARTESIAN_POINT('',(2.675,0.675,1.2)); +#61100 = LINE('',#61101,#61102); +#61101 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61102 = VECTOR('',#61103,1.); +#61103 = DIRECTION('',(-6.7E-16,-1.,3.3E-16)); +#61104 = ORIENTED_EDGE('',*,*,#61105,.T.); +#61105 = EDGE_CURVE('',#61098,#61106,#61108,.T.); +#61106 = VERTEX_POINT('',#61107); +#61107 = CARTESIAN_POINT('',(2.675,1.68,1.2)); +#61108 = LINE('',#61109,#61110); +#61109 = CARTESIAN_POINT('',(2.675,-1.73,1.2)); +#61110 = VECTOR('',#61111,1.); +#61111 = DIRECTION('',(0.,1.,0.)); +#61112 = ORIENTED_EDGE('',*,*,#61113,.F.); +#61113 = EDGE_CURVE('',#61114,#61106,#61116,.T.); +#61114 = VERTEX_POINT('',#61115); +#61115 = CARTESIAN_POINT('',(-2.675,1.68,1.2)); +#61116 = LINE('',#61117,#61118); +#61117 = CARTESIAN_POINT('',(-2.675,1.68,1.2)); +#61118 = VECTOR('',#61119,1.); +#61119 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61120 = ORIENTED_EDGE('',*,*,#61121,.F.); +#61121 = EDGE_CURVE('',#61122,#61114,#61124,.T.); +#61122 = VERTEX_POINT('',#61123); +#61123 = CARTESIAN_POINT('',(-2.675,0.675,1.2)); +#61124 = LINE('',#61125,#61126); +#61125 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61126 = VECTOR('',#61127,1.); +#61127 = DIRECTION('',(0.,1.,0.)); +#61128 = ORIENTED_EDGE('',*,*,#61129,.F.); +#61129 = EDGE_CURVE('',#61130,#61122,#61132,.T.); +#61130 = VERTEX_POINT('',#61131); +#61131 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61132 = LINE('',#61133,#61134); +#61133 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61134 = VECTOR('',#61135,1.); +#61135 = DIRECTION('',(0.,1.,0.)); +#61136 = ORIENTED_EDGE('',*,*,#61137,.T.); +#61137 = EDGE_CURVE('',#61130,#61138,#61140,.T.); +#61138 = VERTEX_POINT('',#61139); +#61139 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#61140 = LINE('',#61141,#61142); +#61141 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61142 = VECTOR('',#61143,1.); +#61143 = DIRECTION('',(-5.6E-16,-1.,4.4E-16)); +#61144 = ORIENTED_EDGE('',*,*,#61145,.F.); +#61145 = EDGE_CURVE('',#60648,#61138,#61146,.T.); +#61146 = LINE('',#61147,#61148); +#61147 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61148 = VECTOR('',#61149,1.); +#61149 = DIRECTION('',(0.,1.,0.)); +#61150 = ORIENTED_EDGE('',*,*,#60647,.F.); +#61151 = ORIENTED_EDGE('',*,*,#60738,.T.); +#61152 = FACE_BOUND('',#61153,.F.); +#61153 = EDGE_LOOP('',(#61154,#61164,#61173,#61181,#61190,#61198,#61207, + #61215)); +#61154 = ORIENTED_EDGE('',*,*,#61155,.T.); +#61155 = EDGE_CURVE('',#61156,#61158,#61160,.T.); +#61156 = VERTEX_POINT('',#61157); +#61157 = CARTESIAN_POINT('',(-1.255,0.705,1.2)); +#61158 = VERTEX_POINT('',#61159); +#61159 = CARTESIAN_POINT('',(1.255,0.705,1.2)); +#61160 = LINE('',#61161,#61162); +#61161 = CARTESIAN_POINT('',(-2.04,0.705,1.2)); +#61162 = VECTOR('',#61163,1.); +#61163 = DIRECTION('',(1.,2.2E-16,2.8E-16)); +#61164 = ORIENTED_EDGE('',*,*,#61165,.T.); +#61165 = EDGE_CURVE('',#61158,#61166,#61168,.T.); +#61166 = VERTEX_POINT('',#61167); +#61167 = CARTESIAN_POINT('',(1.405,0.555,1.2)); +#61168 = CIRCLE('',#61169,0.15); +#61169 = AXIS2_PLACEMENT_3D('',#61170,#61171,#61172); +#61170 = CARTESIAN_POINT('',(1.255,0.555,1.2)); +#61171 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61172 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61173 = ORIENTED_EDGE('',*,*,#61174,.T.); +#61174 = EDGE_CURVE('',#61166,#61175,#61177,.T.); +#61175 = VERTEX_POINT('',#61176); +#61176 = CARTESIAN_POINT('',(1.405,-0.555,1.2)); +#61177 = LINE('',#61178,#61179); +#61178 = CARTESIAN_POINT('',(1.405,-0.5125,1.2)); +#61179 = VECTOR('',#61180,1.); +#61180 = DIRECTION('',(1.1E-16,-1.,6.6E-16)); +#61181 = ORIENTED_EDGE('',*,*,#61182,.F.); +#61182 = EDGE_CURVE('',#61183,#61175,#61185,.T.); +#61183 = VERTEX_POINT('',#61184); +#61184 = CARTESIAN_POINT('',(1.255,-0.705,1.2)); +#61185 = CIRCLE('',#61186,0.15); +#61186 = AXIS2_PLACEMENT_3D('',#61187,#61188,#61189); +#61187 = CARTESIAN_POINT('',(1.255,-0.555,1.2)); +#61188 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61189 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61190 = ORIENTED_EDGE('',*,*,#61191,.T.); +#61191 = EDGE_CURVE('',#61183,#61192,#61194,.T.); +#61192 = VERTEX_POINT('',#61193); +#61193 = CARTESIAN_POINT('',(-1.255,-0.705,1.2)); +#61194 = LINE('',#61195,#61196); +#61195 = CARTESIAN_POINT('',(-0.635,-0.705,1.2)); +#61196 = VECTOR('',#61197,1.); +#61197 = DIRECTION('',(-1.,-2.2E-16,-2.8E-16)); +#61198 = ORIENTED_EDGE('',*,*,#61199,.F.); +#61199 = EDGE_CURVE('',#61200,#61192,#61202,.T.); +#61200 = VERTEX_POINT('',#61201); +#61201 = CARTESIAN_POINT('',(-1.405,-0.555,1.2)); +#61202 = CIRCLE('',#61203,0.15); +#61203 = AXIS2_PLACEMENT_3D('',#61204,#61205,#61206); +#61204 = CARTESIAN_POINT('',(-1.255,-0.555,1.2)); +#61205 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61206 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61207 = ORIENTED_EDGE('',*,*,#61208,.T.); +#61208 = EDGE_CURVE('',#61200,#61209,#61211,.T.); +#61209 = VERTEX_POINT('',#61210); +#61210 = CARTESIAN_POINT('',(-1.405,0.555,1.2)); +#61211 = LINE('',#61212,#61213); +#61212 = CARTESIAN_POINT('',(-1.405,-1.2175,1.2)); +#61213 = VECTOR('',#61214,1.); +#61214 = DIRECTION('',(-1.1E-16,1.,-6.6E-16)); +#61215 = ORIENTED_EDGE('',*,*,#61216,.F.); +#61216 = EDGE_CURVE('',#61156,#61209,#61217,.T.); +#61217 = CIRCLE('',#61218,0.15); +#61218 = AXIS2_PLACEMENT_3D('',#61219,#61220,#61221); +#61219 = CARTESIAN_POINT('',(-1.255,0.555,1.2)); +#61220 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61221 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61222 = PLANE('',#61223); +#61223 = AXIS2_PLACEMENT_3D('',#61224,#61225,#61226); +#61224 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61225 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#61226 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#61227 = ADVANCED_FACE('',(#61228),#61255,.F.); +#61228 = FACE_BOUND('',#61229,.F.); +#61229 = EDGE_LOOP('',(#61230,#61239,#61247,#61254)); +#61230 = ORIENTED_EDGE('',*,*,#61231,.T.); +#61231 = EDGE_CURVE('',#60648,#61232,#61234,.T.); +#61232 = VERTEX_POINT('',#61233); +#61233 = CARTESIAN_POINT('',(-2.825,-0.525,1.2)); +#61234 = CIRCLE('',#61235,0.15); +#61235 = AXIS2_PLACEMENT_3D('',#61236,#61237,#61238); +#61236 = CARTESIAN_POINT('',(-2.825,-0.675,1.2)); +#61237 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#61238 = DIRECTION('',(-1.,1.11E-15,6.E-17)); +#61239 = ORIENTED_EDGE('',*,*,#61240,.T.); +#61240 = EDGE_CURVE('',#61232,#61241,#61243,.T.); +#61241 = VERTEX_POINT('',#61242); +#61242 = CARTESIAN_POINT('',(-2.825,-0.525,1.32)); +#61243 = LINE('',#61244,#61245); +#61244 = CARTESIAN_POINT('',(-2.825,-0.525,1.2)); +#61245 = VECTOR('',#61246,1.); +#61246 = DIRECTION('',(6.E-17,-1.1E-16,1.)); +#61247 = ORIENTED_EDGE('',*,*,#61248,.F.); +#61248 = EDGE_CURVE('',#60656,#61241,#61249,.T.); +#61249 = CIRCLE('',#61250,0.15); +#61250 = AXIS2_PLACEMENT_3D('',#61251,#61252,#61253); +#61251 = CARTESIAN_POINT('',(-2.825,-0.675,1.32)); +#61252 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#61253 = DIRECTION('',(-1.,1.11E-15,6.E-17)); +#61254 = ORIENTED_EDGE('',*,*,#60655,.F.); +#61255 = CYLINDRICAL_SURFACE('',#61256,0.15); +#61256 = AXIS2_PLACEMENT_3D('',#61257,#61258,#61259); +#61257 = CARTESIAN_POINT('',(-2.825,-0.675,1.2)); +#61258 = DIRECTION('',(6.E-17,-1.1E-16,1.)); +#61259 = DIRECTION('',(1.,-8.9E-16,-6.E-17)); +#61260 = ADVANCED_FACE('',(#61261),#61272,.T.); +#61261 = FACE_BOUND('',#61262,.T.); +#61262 = EDGE_LOOP('',(#61263,#61264,#61265,#61266)); +#61263 = ORIENTED_EDGE('',*,*,#60671,.T.); +#61264 = ORIENTED_EDGE('',*,*,#60994,.T.); +#61265 = ORIENTED_EDGE('',*,*,#60800,.F.); +#61266 = ORIENTED_EDGE('',*,*,#61267,.F.); +#61267 = EDGE_CURVE('',#60664,#60793,#61268,.T.); +#61268 = LINE('',#61269,#61270); +#61269 = CARTESIAN_POINT('',(-2.675,-1.7,1.32)); +#61270 = VECTOR('',#61271,1.); +#61271 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61272 = CYLINDRICAL_SURFACE('',#61273,0.15); +#61273 = AXIS2_PLACEMENT_3D('',#61274,#61275,#61276); +#61274 = CARTESIAN_POINT('',(-2.675,-1.7,1.17)); +#61275 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61276 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#61277 = ADVANCED_FACE('',(#61278,#61353),#61435,.F.); +#61278 = FACE_BOUND('',#61279,.F.); +#61279 = EDGE_LOOP('',(#61280,#61290,#61298,#61306,#61312,#61313,#61314, + #61315,#61323,#61331,#61339,#61347)); +#61280 = ORIENTED_EDGE('',*,*,#61281,.T.); +#61281 = EDGE_CURVE('',#61282,#61284,#61286,.T.); +#61282 = VERTEX_POINT('',#61283); +#61283 = CARTESIAN_POINT('',(2.675,1.7,1.32)); +#61284 = VERTEX_POINT('',#61285); +#61285 = CARTESIAN_POINT('',(2.675,0.675,1.32)); +#61286 = LINE('',#61287,#61288); +#61287 = CARTESIAN_POINT('',(2.675,1.85,1.32)); +#61288 = VECTOR('',#61289,1.); +#61289 = DIRECTION('',(0.,-1.,0.)); +#61290 = ORIENTED_EDGE('',*,*,#61291,.F.); +#61291 = EDGE_CURVE('',#61292,#61284,#61294,.T.); +#61292 = VERTEX_POINT('',#61293); +#61293 = CARTESIAN_POINT('',(2.675,0.525,1.32)); +#61294 = LINE('',#61295,#61296); +#61295 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61296 = VECTOR('',#61297,1.); +#61297 = DIRECTION('',(6.7E-16,1.,-3.3E-16)); +#61298 = ORIENTED_EDGE('',*,*,#61299,.F.); +#61299 = EDGE_CURVE('',#61300,#61292,#61302,.T.); +#61300 = VERTEX_POINT('',#61301); +#61301 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61302 = LINE('',#61303,#61304); +#61303 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61304 = VECTOR('',#61305,1.); +#61305 = DIRECTION('',(1.E-15,1.,1.E-30)); +#61306 = ORIENTED_EDGE('',*,*,#61307,.F.); +#61307 = EDGE_CURVE('',#60785,#61300,#61308,.T.); +#61308 = LINE('',#61309,#61310); +#61309 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61310 = VECTOR('',#61311,1.); +#61311 = DIRECTION('',(6.7E-16,1.,-3.3E-16)); +#61312 = ORIENTED_EDGE('',*,*,#60792,.T.); +#61313 = ORIENTED_EDGE('',*,*,#61267,.F.); +#61314 = ORIENTED_EDGE('',*,*,#60663,.F.); +#61315 = ORIENTED_EDGE('',*,*,#61316,.F.); +#61316 = EDGE_CURVE('',#61317,#60656,#61319,.T.); +#61317 = VERTEX_POINT('',#61318); +#61318 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#61319 = LINE('',#61320,#61321); +#61320 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61321 = VECTOR('',#61322,1.); +#61322 = DIRECTION('',(0.,-1.,0.)); +#61323 = ORIENTED_EDGE('',*,*,#61324,.T.); +#61324 = EDGE_CURVE('',#61317,#61325,#61327,.T.); +#61325 = VERTEX_POINT('',#61326); +#61326 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#61327 = LINE('',#61328,#61329); +#61328 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#61329 = VECTOR('',#61330,1.); +#61330 = DIRECTION('',(5.6E-16,1.,-4.4E-16)); +#61331 = ORIENTED_EDGE('',*,*,#61332,.F.); +#61332 = EDGE_CURVE('',#61333,#61325,#61335,.T.); +#61333 = VERTEX_POINT('',#61334); +#61334 = CARTESIAN_POINT('',(-2.675,0.675,1.32)); +#61335 = LINE('',#61336,#61337); +#61336 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61337 = VECTOR('',#61338,1.); +#61338 = DIRECTION('',(0.,-1.,0.)); +#61339 = ORIENTED_EDGE('',*,*,#61340,.F.); +#61340 = EDGE_CURVE('',#61341,#61333,#61343,.T.); +#61341 = VERTEX_POINT('',#61342); +#61342 = CARTESIAN_POINT('',(-2.675,1.7,1.32)); +#61343 = LINE('',#61344,#61345); +#61344 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61345 = VECTOR('',#61346,1.); +#61346 = DIRECTION('',(0.,-1.,0.)); +#61347 = ORIENTED_EDGE('',*,*,#61348,.T.); +#61348 = EDGE_CURVE('',#61341,#61282,#61349,.T.); +#61349 = LINE('',#61350,#61351); +#61350 = CARTESIAN_POINT('',(-2.675,1.7,1.32)); +#61351 = VECTOR('',#61352,1.); +#61352 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61353 = FACE_BOUND('',#61354,.F.); +#61354 = EDGE_LOOP('',(#61355,#61365,#61377,#61385,#61397,#61405,#61417, + #61425)); +#61355 = ORIENTED_EDGE('',*,*,#61356,.F.); +#61356 = EDGE_CURVE('',#61357,#61359,#61361,.T.); +#61357 = VERTEX_POINT('',#61358); +#61358 = CARTESIAN_POINT('',(2.2875,1.095801166539,1.32)); +#61359 = VERTEX_POINT('',#61360); +#61360 = CARTESIAN_POINT('',(2.2875,-1.095801166539,1.32)); +#61361 = LINE('',#61362,#61363); +#61362 = CARTESIAN_POINT('',(2.2875,1.3925,1.32)); +#61363 = VECTOR('',#61364,1.); +#61364 = DIRECTION('',(0.,-1.,0.)); +#61365 = ORIENTED_EDGE('',*,*,#61366,.T.); +#61366 = EDGE_CURVE('',#61357,#61367,#61369,.T.); +#61367 = VERTEX_POINT('',#61368); +#61368 = CARTESIAN_POINT('',(1.990801166539,1.3925,1.32)); +#61369 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61370,#61371,#61372,#61373, + #61374,#61375,#61376),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61370 = CARTESIAN_POINT('',(2.2875,1.095801166539,1.32)); +#61371 = CARTESIAN_POINT('',(2.287499983534,1.180338062033,1.32)); +#61372 = CARTESIAN_POINT('',(2.262319815931,1.260742574749,1.32)); +#61373 = CARTESIAN_POINT('',(2.211876293414,1.328395537812,1.32)); +#61374 = CARTESIAN_POINT('',(2.141910175284,1.37328964386,1.32)); +#61375 = CARTESIAN_POINT('',(2.06439620365,1.392499985665,1.32)); +#61376 = CARTESIAN_POINT('',(1.990801166539,1.3925,1.32)); +#61377 = ORIENTED_EDGE('',*,*,#61378,.F.); +#61378 = EDGE_CURVE('',#61379,#61367,#61381,.T.); +#61379 = VERTEX_POINT('',#61380); +#61380 = CARTESIAN_POINT('',(-1.990801166539,1.3925,1.32)); +#61381 = LINE('',#61382,#61383); +#61382 = CARTESIAN_POINT('',(-2.2875,1.3925,1.32)); +#61383 = VECTOR('',#61384,1.); +#61384 = DIRECTION('',(1.,0.,0.)); +#61385 = ORIENTED_EDGE('',*,*,#61386,.F.); +#61386 = EDGE_CURVE('',#61387,#61379,#61389,.T.); +#61387 = VERTEX_POINT('',#61388); +#61388 = CARTESIAN_POINT('',(-2.2875,1.095801166539,1.32)); +#61389 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61390,#61391,#61392,#61393, + #61394,#61395,#61396),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61390 = CARTESIAN_POINT('',(-2.2875,1.095801166539,1.32)); +#61391 = CARTESIAN_POINT('',(-2.287499983534,1.180338062267,1.32)); +#61392 = CARTESIAN_POINT('',(-2.262319815936,1.260742574684,1.32)); +#61393 = CARTESIAN_POINT('',(-2.211876293412,1.328395537822,1.32)); +#61394 = CARTESIAN_POINT('',(-2.141910175285,1.373289643859,1.32)); +#61395 = CARTESIAN_POINT('',(-2.06439620365,1.392499985665,1.32)); +#61396 = CARTESIAN_POINT('',(-1.990801166539,1.3925,1.32)); +#61397 = ORIENTED_EDGE('',*,*,#61398,.F.); +#61398 = EDGE_CURVE('',#61399,#61387,#61401,.T.); +#61399 = VERTEX_POINT('',#61400); +#61400 = CARTESIAN_POINT('',(-2.2875,-1.095801166539,1.32)); +#61401 = LINE('',#61402,#61403); +#61402 = CARTESIAN_POINT('',(-2.2875,-1.3925,1.32)); +#61403 = VECTOR('',#61404,1.); +#61404 = DIRECTION('',(0.,1.,0.)); +#61405 = ORIENTED_EDGE('',*,*,#61406,.F.); +#61406 = EDGE_CURVE('',#61407,#61399,#61409,.T.); +#61407 = VERTEX_POINT('',#61408); +#61408 = CARTESIAN_POINT('',(-1.990801166539,-1.3925,1.32)); +#61409 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61410,#61411,#61412,#61413, + #61414,#61415,#61416),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61410 = CARTESIAN_POINT('',(-1.990801166539,-1.3925,1.32)); +#61411 = CARTESIAN_POINT('',(-2.075338062122,-1.392499983534,1.32)); +#61412 = CARTESIAN_POINT('',(-2.155742574723,-1.36731981593,1.32)); +#61413 = CARTESIAN_POINT('',(-2.223395537816,-1.316876293414,1.32)); +#61414 = CARTESIAN_POINT('',(-2.26828964386,-1.246910175284,1.32)); +#61415 = CARTESIAN_POINT('',(-2.287499985665,-1.16939620365,1.32)); +#61416 = CARTESIAN_POINT('',(-2.2875,-1.095801166539,1.32)); +#61417 = ORIENTED_EDGE('',*,*,#61418,.F.); +#61418 = EDGE_CURVE('',#61419,#61407,#61421,.T.); +#61419 = VERTEX_POINT('',#61420); +#61420 = CARTESIAN_POINT('',(1.990801166539,-1.3925,1.32)); +#61421 = LINE('',#61422,#61423); +#61422 = CARTESIAN_POINT('',(2.2875,-1.3925,1.32)); +#61423 = VECTOR('',#61424,1.); +#61424 = DIRECTION('',(-1.,0.,0.)); +#61425 = ORIENTED_EDGE('',*,*,#61426,.F.); +#61426 = EDGE_CURVE('',#61359,#61419,#61427,.T.); +#61427 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61428,#61429,#61430,#61431, + #61432,#61433,#61434),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61428 = CARTESIAN_POINT('',(2.2875,-1.095801166539,1.32)); +#61429 = CARTESIAN_POINT('',(2.287499983534,-1.180338062137,1.32)); +#61430 = CARTESIAN_POINT('',(2.262319815928,-1.260742574719,1.32)); +#61431 = CARTESIAN_POINT('',(2.211876293415,-1.328395537817,1.32)); +#61432 = CARTESIAN_POINT('',(2.141910175284,-1.37328964386,1.32)); +#61433 = CARTESIAN_POINT('',(2.06439620365,-1.392499985665,1.32)); +#61434 = CARTESIAN_POINT('',(1.990801166539,-1.3925,1.32)); +#61435 = PLANE('',#61436); +#61436 = AXIS2_PLACEMENT_3D('',#61437,#61438,#61439); +#61437 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61438 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#61439 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#61440 = ADVANCED_FACE('',(#61441),#61468,.F.); +#61441 = FACE_BOUND('',#61442,.F.); +#61442 = EDGE_LOOP('',(#61443,#61444,#61453,#61461)); +#61443 = ORIENTED_EDGE('',*,*,#60784,.T.); +#61444 = ORIENTED_EDGE('',*,*,#61445,.T.); +#61445 = EDGE_CURVE('',#60785,#61446,#61448,.T.); +#61446 = VERTEX_POINT('',#61447); +#61447 = CARTESIAN_POINT('',(2.825,-0.525,1.32)); +#61448 = CIRCLE('',#61449,0.15); +#61449 = AXIS2_PLACEMENT_3D('',#61450,#61451,#61452); +#61450 = CARTESIAN_POINT('',(2.825,-0.675,1.32)); +#61451 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#61452 = DIRECTION('',(1.,0.,7.2E-16)); +#61453 = ORIENTED_EDGE('',*,*,#61454,.F.); +#61454 = EDGE_CURVE('',#61455,#61446,#61457,.T.); +#61455 = VERTEX_POINT('',#61456); +#61456 = CARTESIAN_POINT('',(2.825,-0.525,1.2)); +#61457 = LINE('',#61458,#61459); +#61458 = CARTESIAN_POINT('',(2.825,-0.525,1.2)); +#61459 = VECTOR('',#61460,1.); +#61460 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#61461 = ORIENTED_EDGE('',*,*,#61462,.F.); +#61462 = EDGE_CURVE('',#60777,#61455,#61463,.T.); +#61463 = CIRCLE('',#61464,0.15); +#61464 = AXIS2_PLACEMENT_3D('',#61465,#61466,#61467); +#61465 = CARTESIAN_POINT('',(2.825,-0.675,1.2)); +#61466 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#61467 = DIRECTION('',(1.,0.,7.2E-16)); +#61468 = CYLINDRICAL_SURFACE('',#61469,0.15); +#61469 = AXIS2_PLACEMENT_3D('',#61470,#61471,#61472); +#61470 = CARTESIAN_POINT('',(2.825,-0.675,1.2)); +#61471 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#61472 = DIRECTION('',(-1.,2.2E-16,-7.2E-16)); +#61473 = ADVANCED_FACE('',(#61474),#61492,.T.); +#61474 = FACE_BOUND('',#61475,.F.); +#61475 = EDGE_LOOP('',(#61476,#61477,#61485,#61491)); +#61476 = ORIENTED_EDGE('',*,*,#60874,.F.); +#61477 = ORIENTED_EDGE('',*,*,#61478,.T.); +#61478 = EDGE_CURVE('',#60867,#61479,#61481,.T.); +#61479 = VERTEX_POINT('',#61480); +#61480 = CARTESIAN_POINT('',(2.725,-1.85,0.66)); +#61481 = LINE('',#61482,#61483); +#61482 = CARTESIAN_POINT('',(2.725,-1.73,0.66)); +#61483 = VECTOR('',#61484,1.); +#61484 = DIRECTION('',(-8.9E-16,-1.,4.4E-16)); +#61485 = ORIENTED_EDGE('',*,*,#61486,.T.); +#61486 = EDGE_CURVE('',#61479,#60810,#61487,.T.); +#61487 = LINE('',#61488,#61489); +#61488 = CARTESIAN_POINT('',(2.675,-1.85,0.66)); +#61489 = VECTOR('',#61490,1.); +#61490 = DIRECTION('',(-1.,8.9E-16,-1.7E-16)); +#61491 = ORIENTED_EDGE('',*,*,#60817,.F.); +#61492 = PLANE('',#61493); +#61493 = AXIS2_PLACEMENT_3D('',#61494,#61495,#61496); +#61494 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#61495 = DIRECTION('',(-6.1E-16,4.4E-16,1.)); +#61496 = DIRECTION('',(8.9E-16,1.,-4.4E-16)); +#61497 = ADVANCED_FACE('',(#61498),#61516,.T.); +#61498 = FACE_BOUND('',#61499,.F.); +#61499 = EDGE_LOOP('',(#61500,#61508,#61514,#61515)); +#61500 = ORIENTED_EDGE('',*,*,#61501,.F.); +#61501 = EDGE_CURVE('',#61502,#60923,#61504,.T.); +#61502 = VERTEX_POINT('',#61503); +#61503 = CARTESIAN_POINT('',(2.725,-1.85,0.1)); +#61504 = LINE('',#61505,#61506); +#61505 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#61506 = VECTOR('',#61507,1.); +#61507 = DIRECTION('',(-1.,8.9E-16,-4.4E-16)); +#61508 = ORIENTED_EDGE('',*,*,#61509,.T.); +#61509 = EDGE_CURVE('',#61502,#60859,#61510,.T.); +#61510 = LINE('',#61511,#61512); +#61511 = CARTESIAN_POINT('',(2.725,-1.85,0.1)); +#61512 = VECTOR('',#61513,1.); +#61513 = DIRECTION('',(8.9E-16,1.,2.5E-16)); +#61514 = ORIENTED_EDGE('',*,*,#60858,.T.); +#61515 = ORIENTED_EDGE('',*,*,#60930,.F.); +#61516 = PLANE('',#61517); +#61517 = AXIS2_PLACEMENT_3D('',#61518,#61519,#61520); +#61518 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#61519 = DIRECTION('',(6.1E-16,2.5E-16,-1.)); +#61520 = DIRECTION('',(-8.9E-16,-1.,-2.5E-16)); +#61521 = ADVANCED_FACE('',(#61522),#61549,.F.); +#61522 = FACE_BOUND('',#61523,.F.); +#61523 = EDGE_LOOP('',(#61524,#61534,#61541,#61542)); +#61524 = ORIENTED_EDGE('',*,*,#61525,.T.); +#61525 = EDGE_CURVE('',#61526,#61528,#61530,.T.); +#61526 = VERTEX_POINT('',#61527); +#61527 = CARTESIAN_POINT('',(2.775,-1.68,0.1)); +#61528 = VERTEX_POINT('',#61529); +#61529 = CARTESIAN_POINT('',(2.775,-1.68,0.66)); +#61530 = LINE('',#61531,#61532); +#61531 = CARTESIAN_POINT('',(2.775,-1.68,0.1)); +#61532 = VECTOR('',#61533,1.); +#61533 = DIRECTION('',(-1.39E-15,-3.9E-16,1.)); +#61534 = ORIENTED_EDGE('',*,*,#61535,.T.); +#61535 = EDGE_CURVE('',#61528,#60867,#61536,.T.); +#61536 = CIRCLE('',#61537,5.E-02); +#61537 = AXIS2_PLACEMENT_3D('',#61538,#61539,#61540); +#61538 = CARTESIAN_POINT('',(2.725,-1.68,0.66)); +#61539 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#61540 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#61541 = ORIENTED_EDGE('',*,*,#60866,.F.); +#61542 = ORIENTED_EDGE('',*,*,#61543,.F.); +#61543 = EDGE_CURVE('',#61526,#60859,#61544,.T.); +#61544 = CIRCLE('',#61545,5.E-02); +#61545 = AXIS2_PLACEMENT_3D('',#61546,#61547,#61548); +#61546 = CARTESIAN_POINT('',(2.725,-1.68,0.1)); +#61547 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#61548 = DIRECTION('',(7.55E-15,-1.,-1.7E-16)); +#61549 = CYLINDRICAL_SURFACE('',#61550,5.E-02); +#61550 = AXIS2_PLACEMENT_3D('',#61551,#61552,#61553); +#61551 = CARTESIAN_POINT('',(2.725,-1.68,0.1)); +#61552 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#61553 = DIRECTION('',(7.55E-15,-1.,-1.7E-16)); +#61554 = ADVANCED_FACE('',(#61555),#61566,.T.); +#61555 = FACE_BOUND('',#61556,.T.); +#61556 = EDGE_LOOP('',(#61557,#61558,#61564,#61565)); +#61557 = ORIENTED_EDGE('',*,*,#61065,.F.); +#61558 = ORIENTED_EDGE('',*,*,#61559,.F.); +#61559 = EDGE_CURVE('',#60963,#61058,#61560,.T.); +#61560 = LINE('',#61561,#61562); +#61561 = CARTESIAN_POINT('',(-2.725,-1.85,0.66)); +#61562 = VECTOR('',#61563,1.); +#61563 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61564 = ORIENTED_EDGE('',*,*,#60962,.T.); +#61565 = ORIENTED_EDGE('',*,*,#60987,.F.); +#61566 = PLANE('',#61567); +#61567 = AXIS2_PLACEMENT_3D('',#61568,#61569,#61570); +#61568 = CARTESIAN_POINT('',(-2.675,-1.85,0.66)); +#61569 = DIRECTION('',(-4.4E-16,-1.,1.E-15)); +#61570 = DIRECTION('',(3.3E-16,-1.E-15,-1.)); +#61571 = ADVANCED_FACE('',(#61572),#61591,.F.); +#61572 = FACE_BOUND('',#61573,.F.); +#61573 = EDGE_LOOP('',(#61574,#61583,#61584,#61585)); +#61574 = ORIENTED_EDGE('',*,*,#61575,.T.); +#61575 = EDGE_CURVE('',#61576,#60963,#61578,.T.); +#61576 = VERTEX_POINT('',#61577); +#61577 = CARTESIAN_POINT('',(-2.895,-1.68,0.1)); +#61578 = CIRCLE('',#61579,0.17); +#61579 = AXIS2_PLACEMENT_3D('',#61580,#61581,#61582); +#61580 = CARTESIAN_POINT('',(-2.725,-1.68,0.1)); +#61581 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61582 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#61583 = ORIENTED_EDGE('',*,*,#60970,.T.); +#61584 = ORIENTED_EDGE('',*,*,#61023,.F.); +#61585 = ORIENTED_EDGE('',*,*,#61586,.F.); +#61586 = EDGE_CURVE('',#61576,#61024,#61587,.T.); +#61587 = LINE('',#61588,#61589); +#61588 = CARTESIAN_POINT('',(-2.895,-1.68,0.1)); +#61589 = VECTOR('',#61590,1.); +#61590 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#61591 = PLANE('',#61592); +#61592 = AXIS2_PLACEMENT_3D('',#61593,#61594,#61595); +#61593 = CARTESIAN_POINT('',(-2.802781745931,-1.757781745931,0.1)); +#61594 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61595 = DIRECTION('',(0.707106781187,-0.707106781187,7.990306627408E-16 + )); +#61596 = ADVANCED_FACE('',(#61597),#61608,.T.); +#61597 = FACE_BOUND('',#61598,.F.); +#61598 = EDGE_LOOP('',(#61599,#61600,#61606,#61607)); +#61599 = ORIENTED_EDGE('',*,*,#61486,.F.); +#61600 = ORIENTED_EDGE('',*,*,#61601,.F.); +#61601 = EDGE_CURVE('',#61502,#61479,#61602,.T.); +#61602 = LINE('',#61603,#61604); +#61603 = CARTESIAN_POINT('',(2.725,-1.85,0.66)); +#61604 = VECTOR('',#61605,1.); +#61605 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#61606 = ORIENTED_EDGE('',*,*,#61501,.T.); +#61607 = ORIENTED_EDGE('',*,*,#61001,.F.); +#61608 = PLANE('',#61609); +#61609 = AXIS2_PLACEMENT_3D('',#61610,#61611,#61612); +#61610 = CARTESIAN_POINT('',(2.675,-1.85,0.66)); +#61611 = DIRECTION('',(-8.9E-16,-1.,6.7E-16)); +#61612 = DIRECTION('',(-8.9E-16,6.7E-16,1.)); +#61613 = ADVANCED_FACE('',(#61614),#61657,.T.); +#61614 = FACE_BOUND('',#61615,.T.); +#61615 = EDGE_LOOP('',(#61616,#61624,#61633,#61641,#61650,#61656)); +#61616 = ORIENTED_EDGE('',*,*,#61617,.F.); +#61617 = EDGE_CURVE('',#61618,#61024,#61620,.T.); +#61618 = VERTEX_POINT('',#61619); +#61619 = CARTESIAN_POINT('',(-2.775,-1.01,0.1)); +#61620 = LINE('',#61621,#61622); +#61621 = CARTESIAN_POINT('',(-2.775,-0.87,0.1)); +#61622 = VECTOR('',#61623,1.); +#61623 = DIRECTION('',(-2.16E-15,-1.,2.2E-16)); +#61624 = ORIENTED_EDGE('',*,*,#61625,.T.); +#61625 = EDGE_CURVE('',#61618,#61626,#61628,.T.); +#61626 = VERTEX_POINT('',#61627); +#61627 = CARTESIAN_POINT('',(-2.775,-0.87,0.24)); +#61628 = CIRCLE('',#61629,0.14); +#61629 = AXIS2_PLACEMENT_3D('',#61630,#61631,#61632); +#61630 = CARTESIAN_POINT('',(-2.775,-1.01,0.24)); +#61631 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#61632 = DIRECTION('',(-2.16E-15,-1.,1.E-15)); +#61633 = ORIENTED_EDGE('',*,*,#61634,.T.); +#61634 = EDGE_CURVE('',#61626,#61635,#61637,.T.); +#61635 = VERTEX_POINT('',#61636); +#61636 = CARTESIAN_POINT('',(-2.775,-0.87,0.52)); +#61637 = LINE('',#61638,#61639); +#61638 = CARTESIAN_POINT('',(-2.775,-0.87,0.1)); +#61639 = VECTOR('',#61640,1.); +#61640 = DIRECTION('',(1.7E-16,-5.E-17,1.)); +#61641 = ORIENTED_EDGE('',*,*,#61642,.F.); +#61642 = EDGE_CURVE('',#61643,#61635,#61645,.T.); +#61643 = VERTEX_POINT('',#61644); +#61644 = CARTESIAN_POINT('',(-2.775,-1.01,0.66)); +#61645 = CIRCLE('',#61646,0.14); +#61646 = AXIS2_PLACEMENT_3D('',#61647,#61648,#61649); +#61647 = CARTESIAN_POINT('',(-2.775,-1.01,0.52)); +#61648 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#61649 = DIRECTION('',(2.16E-15,1.,-1.E-15)); +#61650 = ORIENTED_EDGE('',*,*,#61651,.T.); +#61651 = EDGE_CURVE('',#61643,#61034,#61652,.T.); +#61652 = LINE('',#61653,#61654); +#61653 = CARTESIAN_POINT('',(-2.775,-0.87,0.66)); +#61654 = VECTOR('',#61655,1.); +#61655 = DIRECTION('',(-2.16E-15,-1.,2.2E-16)); +#61656 = ORIENTED_EDGE('',*,*,#61042,.F.); +#61657 = PLANE('',#61658); +#61658 = AXIS2_PLACEMENT_3D('',#61659,#61660,#61661); +#61659 = CARTESIAN_POINT('',(-2.775,-0.87,0.1)); +#61660 = DIRECTION('',(1.,-4.4E-16,-1.7E-16)); +#61661 = DIRECTION('',(1.7E-16,-5.E-17,1.)); +#61662 = ADVANCED_FACE('',(#61663),#61682,.F.); +#61663 = FACE_BOUND('',#61664,.F.); +#61664 = EDGE_LOOP('',(#61665,#61666,#61667,#61676)); +#61665 = ORIENTED_EDGE('',*,*,#61033,.T.); +#61666 = ORIENTED_EDGE('',*,*,#61057,.T.); +#61667 = ORIENTED_EDGE('',*,*,#61668,.F.); +#61668 = EDGE_CURVE('',#61669,#61058,#61671,.T.); +#61669 = VERTEX_POINT('',#61670); +#61670 = CARTESIAN_POINT('',(-2.895,-1.68,0.66)); +#61671 = CIRCLE('',#61672,0.17); +#61672 = AXIS2_PLACEMENT_3D('',#61673,#61674,#61675); +#61673 = CARTESIAN_POINT('',(-2.725,-1.68,0.66)); +#61674 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61675 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#61676 = ORIENTED_EDGE('',*,*,#61677,.F.); +#61677 = EDGE_CURVE('',#61034,#61669,#61678,.T.); +#61678 = LINE('',#61679,#61680); +#61679 = CARTESIAN_POINT('',(-2.775,-1.68,0.66)); +#61680 = VECTOR('',#61681,1.); +#61681 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#61682 = PLANE('',#61683); +#61683 = AXIS2_PLACEMENT_3D('',#61684,#61685,#61686); +#61684 = CARTESIAN_POINT('',(-2.802781745931,-1.757781745931,0.66)); +#61685 = DIRECTION('',(9.6E-16,-1.7E-16,-1.)); +#61686 = DIRECTION('',(0.707106781187,-0.707106781187,7.990306627408E-16 + )); +#61687 = ADVANCED_FACE('',(#61688),#61725,.T.); +#61688 = FACE_BOUND('',#61689,.T.); +#61689 = EDGE_LOOP('',(#61690,#61700,#61708,#61714,#61715,#61716,#61717, + #61718)); +#61690 = ORIENTED_EDGE('',*,*,#61691,.T.); +#61691 = EDGE_CURVE('',#61692,#61694,#61696,.T.); +#61692 = VERTEX_POINT('',#61693); +#61693 = CARTESIAN_POINT('',(2.825,0.525,1.2)); +#61694 = VERTEX_POINT('',#61695); +#61695 = CARTESIAN_POINT('',(2.925,0.525,1.2)); +#61696 = LINE('',#61697,#61698); +#61697 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61698 = VECTOR('',#61699,1.); +#61699 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#61700 = ORIENTED_EDGE('',*,*,#61701,.T.); +#61701 = EDGE_CURVE('',#61694,#61702,#61704,.T.); +#61702 = VERTEX_POINT('',#61703); +#61703 = CARTESIAN_POINT('',(2.925,-0.525,1.2)); +#61704 = LINE('',#61705,#61706); +#61705 = CARTESIAN_POINT('',(2.925,0.525,1.2)); +#61706 = VECTOR('',#61707,1.); +#61707 = DIRECTION('',(-1.E-15,-1.,-1.E-30)); +#61708 = ORIENTED_EDGE('',*,*,#61709,.F.); +#61709 = EDGE_CURVE('',#61455,#61702,#61710,.T.); +#61710 = LINE('',#61711,#61712); +#61711 = CARTESIAN_POINT('',(2.675,-0.525,1.2)); +#61712 = VECTOR('',#61713,1.); +#61713 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#61714 = ORIENTED_EDGE('',*,*,#61462,.F.); +#61715 = ORIENTED_EDGE('',*,*,#61081,.F.); +#61716 = ORIENTED_EDGE('',*,*,#61089,.F.); +#61717 = ORIENTED_EDGE('',*,*,#61097,.F.); +#61718 = ORIENTED_EDGE('',*,*,#61719,.T.); +#61719 = EDGE_CURVE('',#61098,#61692,#61720,.T.); +#61720 = CIRCLE('',#61721,0.15); +#61721 = AXIS2_PLACEMENT_3D('',#61722,#61723,#61724); +#61722 = CARTESIAN_POINT('',(2.825,0.675,1.2)); +#61723 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#61724 = DIRECTION('',(-1.,0.,-7.2E-16)); +#61725 = PLANE('',#61726); +#61726 = AXIS2_PLACEMENT_3D('',#61727,#61728,#61729); +#61727 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61728 = DIRECTION('',(5.6E-16,-3.3E-16,-1.)); +#61729 = DIRECTION('',(-6.7E-16,-1.,3.3E-16)); +#61730 = ADVANCED_FACE('',(#61731),#61741,.T.); +#61731 = FACE_BOUND('',#61732,.F.); +#61732 = EDGE_LOOP('',(#61733,#61734,#61740)); +#61733 = ORIENTED_EDGE('',*,*,#61145,.T.); +#61734 = ORIENTED_EDGE('',*,*,#61735,.T.); +#61735 = EDGE_CURVE('',#61138,#61232,#61736,.T.); +#61736 = LINE('',#61737,#61738); +#61737 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#61738 = VECTOR('',#61739,1.); +#61739 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61740 = ORIENTED_EDGE('',*,*,#61231,.F.); +#61741 = PLANE('',#61742); +#61742 = AXIS2_PLACEMENT_3D('',#61743,#61744,#61745); +#61743 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61744 = DIRECTION('',(1.1E-16,-1.1E-16,-1.)); +#61745 = DIRECTION('',(4.4E-16,1.,-1.1E-16)); +#61746 = ADVANCED_FACE('',(#61747),#61781,.T.); +#61747 = FACE_BOUND('',#61748,.F.); +#61748 = EDGE_LOOP('',(#61749,#61757,#61765,#61773,#61779,#61780)); +#61749 = ORIENTED_EDGE('',*,*,#61750,.T.); +#61750 = EDGE_CURVE('',#61130,#61751,#61753,.T.); +#61751 = VERTEX_POINT('',#61752); +#61752 = CARTESIAN_POINT('',(-2.825,0.525,1.2)); +#61753 = LINE('',#61754,#61755); +#61754 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61755 = VECTOR('',#61756,1.); +#61756 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61757 = ORIENTED_EDGE('',*,*,#61758,.T.); +#61758 = EDGE_CURVE('',#61751,#61759,#61761,.T.); +#61759 = VERTEX_POINT('',#61760); +#61760 = CARTESIAN_POINT('',(-2.925,0.525,1.2)); +#61761 = LINE('',#61762,#61763); +#61762 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61763 = VECTOR('',#61764,1.); +#61764 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61765 = ORIENTED_EDGE('',*,*,#61766,.T.); +#61766 = EDGE_CURVE('',#61759,#61767,#61769,.T.); +#61767 = VERTEX_POINT('',#61768); +#61768 = CARTESIAN_POINT('',(-2.925,-0.525,1.2)); +#61769 = LINE('',#61770,#61771); +#61770 = CARTESIAN_POINT('',(-2.925,0.525,1.2)); +#61771 = VECTOR('',#61772,1.); +#61772 = DIRECTION('',(-5.6E-16,-1.,4.4E-16)); +#61773 = ORIENTED_EDGE('',*,*,#61774,.F.); +#61774 = EDGE_CURVE('',#61232,#61767,#61775,.T.); +#61775 = LINE('',#61776,#61777); +#61776 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#61777 = VECTOR('',#61778,1.); +#61778 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61779 = ORIENTED_EDGE('',*,*,#61735,.F.); +#61780 = ORIENTED_EDGE('',*,*,#61137,.F.); +#61781 = PLANE('',#61782); +#61782 = AXIS2_PLACEMENT_3D('',#61783,#61784,#61785); +#61783 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61784 = DIRECTION('',(1.1E-16,-1.1E-16,-1.)); +#61785 = DIRECTION('',(4.4E-16,1.,-1.1E-16)); +#61786 = ADVANCED_FACE('',(#61787),#61837,.T.); +#61787 = FACE_BOUND('',#61788,.T.); +#61788 = EDGE_LOOP('',(#61789,#61790,#61799,#61807,#61815,#61823,#61830, + #61831)); +#61789 = ORIENTED_EDGE('',*,*,#61105,.T.); +#61790 = ORIENTED_EDGE('',*,*,#61791,.T.); +#61791 = EDGE_CURVE('',#61106,#61792,#61794,.T.); +#61792 = VERTEX_POINT('',#61793); +#61793 = CARTESIAN_POINT('',(2.675,1.73,1.15)); +#61794 = CIRCLE('',#61795,5.E-02); +#61795 = AXIS2_PLACEMENT_3D('',#61796,#61797,#61798); +#61796 = CARTESIAN_POINT('',(2.675,1.68,1.15)); +#61797 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61798 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61799 = ORIENTED_EDGE('',*,*,#61800,.T.); +#61800 = EDGE_CURVE('',#61792,#61801,#61803,.T.); +#61801 = VERTEX_POINT('',#61802); +#61802 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#61803 = LINE('',#61804,#61805); +#61804 = CARTESIAN_POINT('',(2.675,1.73,1.2)); +#61805 = VECTOR('',#61806,1.); +#61806 = DIRECTION('',(0.,0.,-1.)); +#61807 = ORIENTED_EDGE('',*,*,#61808,.T.); +#61808 = EDGE_CURVE('',#61801,#61809,#61811,.T.); +#61809 = VERTEX_POINT('',#61810); +#61810 = CARTESIAN_POINT('',(2.675,1.85,0.66)); +#61811 = LINE('',#61812,#61813); +#61812 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#61813 = VECTOR('',#61814,1.); +#61814 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#61815 = ORIENTED_EDGE('',*,*,#61816,.T.); +#61816 = EDGE_CURVE('',#61809,#61817,#61819,.T.); +#61817 = VERTEX_POINT('',#61818); +#61818 = CARTESIAN_POINT('',(2.675,1.85,1.17)); +#61819 = LINE('',#61820,#61821); +#61820 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#61821 = VECTOR('',#61822,1.); +#61822 = DIRECTION('',(0.,0.,1.)); +#61823 = ORIENTED_EDGE('',*,*,#61824,.F.); +#61824 = EDGE_CURVE('',#61282,#61817,#61825,.T.); +#61825 = CIRCLE('',#61826,0.15); +#61826 = AXIS2_PLACEMENT_3D('',#61827,#61828,#61829); +#61827 = CARTESIAN_POINT('',(2.675,1.7,1.17)); +#61828 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61829 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61830 = ORIENTED_EDGE('',*,*,#61281,.T.); +#61831 = ORIENTED_EDGE('',*,*,#61832,.T.); +#61832 = EDGE_CURVE('',#61284,#61098,#61833,.T.); +#61833 = LINE('',#61834,#61835); +#61834 = CARTESIAN_POINT('',(2.675,0.675,1.32)); +#61835 = VECTOR('',#61836,1.); +#61836 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#61837 = PLANE('',#61838); +#61838 = AXIS2_PLACEMENT_3D('',#61839,#61840,#61841); +#61839 = CARTESIAN_POINT('',(2.675,-8.3E-16,1.015149501661)); +#61840 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#61841 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#61842 = ADVANCED_FACE('',(#61843),#61854,.T.); +#61843 = FACE_BOUND('',#61844,.F.); +#61844 = EDGE_LOOP('',(#61845,#61852,#61853)); +#61845 = ORIENTED_EDGE('',*,*,#61846,.T.); +#61846 = EDGE_CURVE('',#61122,#61751,#61847,.T.); +#61847 = CIRCLE('',#61848,0.15); +#61848 = AXIS2_PLACEMENT_3D('',#61849,#61850,#61851); +#61849 = CARTESIAN_POINT('',(-2.825,0.675,1.2)); +#61850 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#61851 = DIRECTION('',(1.,-1.11E-15,-6.E-17)); +#61852 = ORIENTED_EDGE('',*,*,#61750,.F.); +#61853 = ORIENTED_EDGE('',*,*,#61129,.T.); +#61854 = PLANE('',#61855); +#61855 = AXIS2_PLACEMENT_3D('',#61856,#61857,#61858); +#61856 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61857 = DIRECTION('',(1.1E-16,-1.1E-16,-1.)); +#61858 = DIRECTION('',(4.4E-16,1.,-1.1E-16)); +#61859 = ADVANCED_FACE('',(#61860),#61879,.F.); +#61860 = FACE_BOUND('',#61861,.F.); +#61861 = EDGE_LOOP('',(#61862,#61863,#61864,#61872)); +#61862 = ORIENTED_EDGE('',*,*,#61113,.T.); +#61863 = ORIENTED_EDGE('',*,*,#61791,.T.); +#61864 = ORIENTED_EDGE('',*,*,#61865,.F.); +#61865 = EDGE_CURVE('',#61866,#61792,#61868,.T.); +#61866 = VERTEX_POINT('',#61867); +#61867 = CARTESIAN_POINT('',(-2.675,1.73,1.15)); +#61868 = LINE('',#61869,#61870); +#61869 = CARTESIAN_POINT('',(-2.675,1.73,1.15)); +#61870 = VECTOR('',#61871,1.); +#61871 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61872 = ORIENTED_EDGE('',*,*,#61873,.F.); +#61873 = EDGE_CURVE('',#61114,#61866,#61874,.T.); +#61874 = CIRCLE('',#61875,5.E-02); +#61875 = AXIS2_PLACEMENT_3D('',#61876,#61877,#61878); +#61876 = CARTESIAN_POINT('',(-2.675,1.68,1.15)); +#61877 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61878 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61879 = CYLINDRICAL_SURFACE('',#61880,5.E-02); +#61880 = AXIS2_PLACEMENT_3D('',#61881,#61882,#61883); +#61881 = CARTESIAN_POINT('',(-2.675,1.68,1.15)); +#61882 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61883 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#61884 = ADVANCED_FACE('',(#61885),#61927,.F.); +#61885 = FACE_BOUND('',#61886,.F.); +#61886 = EDGE_LOOP('',(#61887,#61888,#61889,#61897,#61905,#61913,#61920, + #61921)); +#61887 = ORIENTED_EDGE('',*,*,#61121,.T.); +#61888 = ORIENTED_EDGE('',*,*,#61873,.T.); +#61889 = ORIENTED_EDGE('',*,*,#61890,.T.); +#61890 = EDGE_CURVE('',#61866,#61891,#61893,.T.); +#61891 = VERTEX_POINT('',#61892); +#61892 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#61893 = LINE('',#61894,#61895); +#61894 = CARTESIAN_POINT('',(-2.675,1.73,1.2)); +#61895 = VECTOR('',#61896,1.); +#61896 = DIRECTION('',(0.,0.,-1.)); +#61897 = ORIENTED_EDGE('',*,*,#61898,.T.); +#61898 = EDGE_CURVE('',#61891,#61899,#61901,.T.); +#61899 = VERTEX_POINT('',#61900); +#61900 = CARTESIAN_POINT('',(-2.675,1.85,0.66)); +#61901 = LINE('',#61902,#61903); +#61902 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#61903 = VECTOR('',#61904,1.); +#61904 = DIRECTION('',(6.7E-16,1.,-4.4E-16)); +#61905 = ORIENTED_EDGE('',*,*,#61906,.T.); +#61906 = EDGE_CURVE('',#61899,#61907,#61909,.T.); +#61907 = VERTEX_POINT('',#61908); +#61908 = CARTESIAN_POINT('',(-2.675,1.85,1.17)); +#61909 = LINE('',#61910,#61911); +#61910 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#61911 = VECTOR('',#61912,1.); +#61912 = DIRECTION('',(0.,0.,1.)); +#61913 = ORIENTED_EDGE('',*,*,#61914,.F.); +#61914 = EDGE_CURVE('',#61341,#61907,#61915,.T.); +#61915 = CIRCLE('',#61916,0.15); +#61916 = AXIS2_PLACEMENT_3D('',#61917,#61918,#61919); +#61917 = CARTESIAN_POINT('',(-2.675,1.7,1.17)); +#61918 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61919 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61920 = ORIENTED_EDGE('',*,*,#61340,.T.); +#61921 = ORIENTED_EDGE('',*,*,#61922,.T.); +#61922 = EDGE_CURVE('',#61333,#61122,#61923,.T.); +#61923 = LINE('',#61924,#61925); +#61924 = CARTESIAN_POINT('',(-2.675,0.675,1.32)); +#61925 = VECTOR('',#61926,1.); +#61926 = DIRECTION('',(-6.E-17,1.1E-16,-1.)); +#61927 = PLANE('',#61928); +#61928 = AXIS2_PLACEMENT_3D('',#61929,#61930,#61931); +#61929 = CARTESIAN_POINT('',(-2.675,1.17E-15,1.015149501661)); +#61930 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#61931 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#61932 = ADVANCED_FACE('',(#61933),#61958,.T.); +#61933 = FACE_BOUND('',#61934,.T.); +#61934 = EDGE_LOOP('',(#61935,#61945,#61951,#61952)); +#61935 = ORIENTED_EDGE('',*,*,#61936,.F.); +#61936 = EDGE_CURVE('',#61937,#61939,#61941,.T.); +#61937 = VERTEX_POINT('',#61938); +#61938 = CARTESIAN_POINT('',(-1.255,0.705,1.9)); +#61939 = VERTEX_POINT('',#61940); +#61940 = CARTESIAN_POINT('',(1.255,0.705,1.9)); +#61941 = LINE('',#61942,#61943); +#61942 = CARTESIAN_POINT('',(-1.405,0.705,1.9)); +#61943 = VECTOR('',#61944,1.); +#61944 = DIRECTION('',(1.,0.,0.)); +#61945 = ORIENTED_EDGE('',*,*,#61946,.T.); +#61946 = EDGE_CURVE('',#61937,#61156,#61947,.T.); +#61947 = LINE('',#61948,#61949); +#61948 = CARTESIAN_POINT('',(-1.255,0.705,1.9)); +#61949 = VECTOR('',#61950,1.); +#61950 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61951 = ORIENTED_EDGE('',*,*,#61155,.T.); +#61952 = ORIENTED_EDGE('',*,*,#61953,.F.); +#61953 = EDGE_CURVE('',#61939,#61158,#61954,.T.); +#61954 = LINE('',#61955,#61956); +#61955 = CARTESIAN_POINT('',(1.255,0.705,1.9)); +#61956 = VECTOR('',#61957,1.); +#61957 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61958 = PLANE('',#61959); +#61959 = AXIS2_PLACEMENT_3D('',#61960,#61961,#61962); +#61960 = CARTESIAN_POINT('',(-1.405,0.705,1.9)); +#61961 = DIRECTION('',(2.2E-16,-1.,6.9E-16)); +#61962 = DIRECTION('',(1.,2.2E-16,3.8E-16)); +#61963 = ADVANCED_FACE('',(#61964),#61983,.F.); +#61964 = FACE_BOUND('',#61965,.F.); +#61965 = EDGE_LOOP('',(#61966,#61967,#61968,#61976)); +#61966 = ORIENTED_EDGE('',*,*,#61946,.T.); +#61967 = ORIENTED_EDGE('',*,*,#61216,.T.); +#61968 = ORIENTED_EDGE('',*,*,#61969,.F.); +#61969 = EDGE_CURVE('',#61970,#61209,#61972,.T.); +#61970 = VERTEX_POINT('',#61971); +#61971 = CARTESIAN_POINT('',(-1.405,0.555,1.9)); +#61972 = LINE('',#61973,#61974); +#61973 = CARTESIAN_POINT('',(-1.405,0.555,1.9)); +#61974 = VECTOR('',#61975,1.); +#61975 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61976 = ORIENTED_EDGE('',*,*,#61977,.F.); +#61977 = EDGE_CURVE('',#61937,#61970,#61978,.T.); +#61978 = CIRCLE('',#61979,0.15); +#61979 = AXIS2_PLACEMENT_3D('',#61980,#61981,#61982); +#61980 = CARTESIAN_POINT('',(-1.255,0.555,1.9)); +#61981 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61982 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61983 = CYLINDRICAL_SURFACE('',#61984,0.15); +#61984 = AXIS2_PLACEMENT_3D('',#61985,#61986,#61987); +#61985 = CARTESIAN_POINT('',(-1.255,0.555,1.9)); +#61986 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61987 = DIRECTION('',(-2.2E-16,1.,-6.9E-16)); +#61988 = ADVANCED_FACE('',(#61989),#62008,.F.); +#61989 = FACE_BOUND('',#61990,.F.); +#61990 = EDGE_LOOP('',(#61991,#62000,#62006,#62007)); +#61991 = ORIENTED_EDGE('',*,*,#61992,.T.); +#61992 = EDGE_CURVE('',#61939,#61993,#61995,.T.); +#61993 = VERTEX_POINT('',#61994); +#61994 = CARTESIAN_POINT('',(1.405,0.555,1.9)); +#61995 = CIRCLE('',#61996,0.15); +#61996 = AXIS2_PLACEMENT_3D('',#61997,#61998,#61999); +#61997 = CARTESIAN_POINT('',(1.255,0.555,1.9)); +#61998 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61999 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#62000 = ORIENTED_EDGE('',*,*,#62001,.T.); +#62001 = EDGE_CURVE('',#61993,#61166,#62002,.T.); +#62002 = LINE('',#62003,#62004); +#62003 = CARTESIAN_POINT('',(1.405,0.555,1.9)); +#62004 = VECTOR('',#62005,1.); +#62005 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62006 = ORIENTED_EDGE('',*,*,#61165,.F.); +#62007 = ORIENTED_EDGE('',*,*,#61953,.F.); +#62008 = CYLINDRICAL_SURFACE('',#62009,0.15); +#62009 = AXIS2_PLACEMENT_3D('',#62010,#62011,#62012); +#62010 = CARTESIAN_POINT('',(1.255,0.555,1.9)); +#62011 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62012 = DIRECTION('',(-2.2E-16,1.,-6.9E-16)); +#62013 = ADVANCED_FACE('',(#62014),#62032,.T.); +#62014 = FACE_BOUND('',#62015,.T.); +#62015 = EDGE_LOOP('',(#62016,#62024,#62030,#62031)); +#62016 = ORIENTED_EDGE('',*,*,#62017,.F.); +#62017 = EDGE_CURVE('',#62018,#61970,#62020,.T.); +#62018 = VERTEX_POINT('',#62019); +#62019 = CARTESIAN_POINT('',(-1.405,-0.555,1.9)); +#62020 = LINE('',#62021,#62022); +#62021 = CARTESIAN_POINT('',(-1.405,-0.705,1.9)); +#62022 = VECTOR('',#62023,1.); +#62023 = DIRECTION('',(0.,1.,-1.E-15)); +#62024 = ORIENTED_EDGE('',*,*,#62025,.T.); +#62025 = EDGE_CURVE('',#62018,#61200,#62026,.T.); +#62026 = LINE('',#62027,#62028); +#62027 = CARTESIAN_POINT('',(-1.405,-0.555,1.9)); +#62028 = VECTOR('',#62029,1.); +#62029 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62030 = ORIENTED_EDGE('',*,*,#61208,.T.); +#62031 = ORIENTED_EDGE('',*,*,#61969,.F.); +#62032 = PLANE('',#62033); +#62033 = AXIS2_PLACEMENT_3D('',#62034,#62035,#62036); +#62034 = CARTESIAN_POINT('',(-1.405,-0.705,1.9)); +#62035 = DIRECTION('',(1.,1.1E-16,2.7E-16)); +#62036 = DIRECTION('',(-1.1E-16,1.,-5.8E-16)); +#62037 = ADVANCED_FACE('',(#62038),#62056,.T.); +#62038 = FACE_BOUND('',#62039,.T.); +#62039 = EDGE_LOOP('',(#62040,#62048,#62049,#62050)); +#62040 = ORIENTED_EDGE('',*,*,#62041,.F.); +#62041 = EDGE_CURVE('',#61993,#62042,#62044,.T.); +#62042 = VERTEX_POINT('',#62043); +#62043 = CARTESIAN_POINT('',(1.405,-0.555,1.9)); +#62044 = LINE('',#62045,#62046); +#62045 = CARTESIAN_POINT('',(1.405,0.705,1.9)); +#62046 = VECTOR('',#62047,1.); +#62047 = DIRECTION('',(0.,-1.,1.E-15)); +#62048 = ORIENTED_EDGE('',*,*,#62001,.T.); +#62049 = ORIENTED_EDGE('',*,*,#61174,.T.); +#62050 = ORIENTED_EDGE('',*,*,#62051,.F.); +#62051 = EDGE_CURVE('',#62042,#61175,#62052,.T.); +#62052 = LINE('',#62053,#62054); +#62053 = CARTESIAN_POINT('',(1.405,-0.555,1.9)); +#62054 = VECTOR('',#62055,1.); +#62055 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62056 = PLANE('',#62057); +#62057 = AXIS2_PLACEMENT_3D('',#62058,#62059,#62060); +#62058 = CARTESIAN_POINT('',(1.405,0.705,1.9)); +#62059 = DIRECTION('',(-1.,-1.1E-16,-2.7E-16)); +#62060 = DIRECTION('',(1.1E-16,-1.,5.8E-16)); +#62061 = ADVANCED_FACE('',(#62062),#62081,.F.); +#62062 = FACE_BOUND('',#62063,.F.); +#62063 = EDGE_LOOP('',(#62064,#62065,#62066,#62074)); +#62064 = ORIENTED_EDGE('',*,*,#62025,.T.); +#62065 = ORIENTED_EDGE('',*,*,#61199,.T.); +#62066 = ORIENTED_EDGE('',*,*,#62067,.F.); +#62067 = EDGE_CURVE('',#62068,#61192,#62070,.T.); +#62068 = VERTEX_POINT('',#62069); +#62069 = CARTESIAN_POINT('',(-1.255,-0.705,1.9)); +#62070 = LINE('',#62071,#62072); +#62071 = CARTESIAN_POINT('',(-1.255,-0.705,1.9)); +#62072 = VECTOR('',#62073,1.); +#62073 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62074 = ORIENTED_EDGE('',*,*,#62075,.F.); +#62075 = EDGE_CURVE('',#62018,#62068,#62076,.T.); +#62076 = CIRCLE('',#62077,0.15); +#62077 = AXIS2_PLACEMENT_3D('',#62078,#62079,#62080); +#62078 = CARTESIAN_POINT('',(-1.255,-0.555,1.9)); +#62079 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#62080 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#62081 = CYLINDRICAL_SURFACE('',#62082,0.15); +#62082 = AXIS2_PLACEMENT_3D('',#62083,#62084,#62085); +#62083 = CARTESIAN_POINT('',(-1.255,-0.555,1.9)); +#62084 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62085 = DIRECTION('',(-1.,-1.1E-16,-2.7E-16)); +#62086 = ADVANCED_FACE('',(#62087),#62106,.F.); +#62087 = FACE_BOUND('',#62088,.F.); +#62088 = EDGE_LOOP('',(#62089,#62097,#62098,#62099)); +#62089 = ORIENTED_EDGE('',*,*,#62090,.T.); +#62090 = EDGE_CURVE('',#62091,#61183,#62093,.T.); +#62091 = VERTEX_POINT('',#62092); +#62092 = CARTESIAN_POINT('',(1.255,-0.705,1.9)); +#62093 = LINE('',#62094,#62095); +#62094 = CARTESIAN_POINT('',(1.255,-0.705,1.9)); +#62095 = VECTOR('',#62096,1.); +#62096 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62097 = ORIENTED_EDGE('',*,*,#61182,.T.); +#62098 = ORIENTED_EDGE('',*,*,#62051,.F.); +#62099 = ORIENTED_EDGE('',*,*,#62100,.F.); +#62100 = EDGE_CURVE('',#62091,#62042,#62101,.T.); +#62101 = CIRCLE('',#62102,0.15); +#62102 = AXIS2_PLACEMENT_3D('',#62103,#62104,#62105); +#62103 = CARTESIAN_POINT('',(1.255,-0.555,1.9)); +#62104 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#62105 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#62106 = CYLINDRICAL_SURFACE('',#62107,0.15); +#62107 = AXIS2_PLACEMENT_3D('',#62108,#62109,#62110); +#62108 = CARTESIAN_POINT('',(1.255,-0.555,1.9)); +#62109 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62110 = DIRECTION('',(2.2E-16,-1.,6.9E-16)); +#62111 = ADVANCED_FACE('',(#62112),#62123,.T.); +#62112 = FACE_BOUND('',#62113,.T.); +#62113 = EDGE_LOOP('',(#62114,#62120,#62121,#62122)); +#62114 = ORIENTED_EDGE('',*,*,#62115,.F.); +#62115 = EDGE_CURVE('',#62091,#62068,#62116,.T.); +#62116 = LINE('',#62117,#62118); +#62117 = CARTESIAN_POINT('',(1.405,-0.705,1.9)); +#62118 = VECTOR('',#62119,1.); +#62119 = DIRECTION('',(-1.,0.,0.)); +#62120 = ORIENTED_EDGE('',*,*,#62090,.T.); +#62121 = ORIENTED_EDGE('',*,*,#61191,.T.); +#62122 = ORIENTED_EDGE('',*,*,#62067,.F.); +#62123 = PLANE('',#62124); +#62124 = AXIS2_PLACEMENT_3D('',#62125,#62126,#62127); +#62125 = CARTESIAN_POINT('',(1.405,-0.705,1.9)); +#62126 = DIRECTION('',(-2.2E-16,1.,-6.9E-16)); +#62127 = DIRECTION('',(-1.,-2.2E-16,-3.8E-16)); +#62128 = ADVANCED_FACE('',(#62129),#62147,.T.); +#62129 = FACE_BOUND('',#62130,.F.); +#62130 = EDGE_LOOP('',(#62131,#62132,#62133,#62141)); +#62131 = ORIENTED_EDGE('',*,*,#61240,.F.); +#62132 = ORIENTED_EDGE('',*,*,#61774,.T.); +#62133 = ORIENTED_EDGE('',*,*,#62134,.T.); +#62134 = EDGE_CURVE('',#61767,#62135,#62137,.T.); +#62135 = VERTEX_POINT('',#62136); +#62136 = CARTESIAN_POINT('',(-2.925,-0.525,1.32)); +#62137 = LINE('',#62138,#62139); +#62138 = CARTESIAN_POINT('',(-2.925,-0.525,1.2)); +#62139 = VECTOR('',#62140,1.); +#62140 = DIRECTION('',(5.6E-16,-4.4E-16,1.)); +#62141 = ORIENTED_EDGE('',*,*,#62142,.F.); +#62142 = EDGE_CURVE('',#61241,#62135,#62143,.T.); +#62143 = LINE('',#62144,#62145); +#62144 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62145 = VECTOR('',#62146,1.); +#62146 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62147 = PLANE('',#62148); +#62148 = AXIS2_PLACEMENT_3D('',#62149,#62150,#62151); +#62149 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#62150 = DIRECTION('',(0.,-1.,3.3E-16)); +#62151 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#62152 = ADVANCED_FACE('',(#62153),#62163,.T.); +#62153 = FACE_BOUND('',#62154,.F.); +#62154 = EDGE_LOOP('',(#62155,#62156,#62162)); +#62155 = ORIENTED_EDGE('',*,*,#61248,.T.); +#62156 = ORIENTED_EDGE('',*,*,#62157,.F.); +#62157 = EDGE_CURVE('',#61317,#61241,#62158,.T.); +#62158 = LINE('',#62159,#62160); +#62159 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62160 = VECTOR('',#62161,1.); +#62161 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62162 = ORIENTED_EDGE('',*,*,#61316,.T.); +#62163 = PLANE('',#62164); +#62164 = AXIS2_PLACEMENT_3D('',#62165,#62166,#62167); +#62165 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62166 = DIRECTION('',(-1.1E-16,1.1E-16,1.)); +#62167 = DIRECTION('',(-4.4E-16,-1.,1.1E-16)); +#62168 = ADVANCED_FACE('',(#62169),#62180,.T.); +#62169 = FACE_BOUND('',#62170,.T.); +#62170 = EDGE_LOOP('',(#62171,#62172,#62173,#62179)); +#62171 = ORIENTED_EDGE('',*,*,#61348,.T.); +#62172 = ORIENTED_EDGE('',*,*,#61824,.T.); +#62173 = ORIENTED_EDGE('',*,*,#62174,.F.); +#62174 = EDGE_CURVE('',#61907,#61817,#62175,.T.); +#62175 = LINE('',#62176,#62177); +#62176 = CARTESIAN_POINT('',(-2.675,1.85,1.17)); +#62177 = VECTOR('',#62178,1.); +#62178 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#62179 = ORIENTED_EDGE('',*,*,#61914,.F.); +#62180 = CYLINDRICAL_SURFACE('',#62181,0.15); +#62181 = AXIS2_PLACEMENT_3D('',#62182,#62183,#62184); +#62182 = CARTESIAN_POINT('',(-2.675,1.7,1.17)); +#62183 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#62184 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#62185 = ADVANCED_FACE('',(#62186),#62223,.T.); +#62186 = FACE_BOUND('',#62187,.T.); +#62187 = EDGE_LOOP('',(#62188,#62196,#62204,#62212,#62219,#62220,#62221, + #62222)); +#62188 = ORIENTED_EDGE('',*,*,#62189,.T.); +#62189 = EDGE_CURVE('',#61446,#62190,#62192,.T.); +#62190 = VERTEX_POINT('',#62191); +#62191 = CARTESIAN_POINT('',(2.925,-0.525,1.32)); +#62192 = LINE('',#62193,#62194); +#62193 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#62194 = VECTOR('',#62195,1.); +#62195 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#62196 = ORIENTED_EDGE('',*,*,#62197,.T.); +#62197 = EDGE_CURVE('',#62190,#62198,#62200,.T.); +#62198 = VERTEX_POINT('',#62199); +#62199 = CARTESIAN_POINT('',(2.925,0.525,1.32)); +#62200 = LINE('',#62201,#62202); +#62201 = CARTESIAN_POINT('',(2.925,-0.525,1.32)); +#62202 = VECTOR('',#62203,1.); +#62203 = DIRECTION('',(1.E-15,1.,1.E-30)); +#62204 = ORIENTED_EDGE('',*,*,#62205,.F.); +#62205 = EDGE_CURVE('',#62206,#62198,#62208,.T.); +#62206 = VERTEX_POINT('',#62207); +#62207 = CARTESIAN_POINT('',(2.825,0.525,1.32)); +#62208 = LINE('',#62209,#62210); +#62209 = CARTESIAN_POINT('',(2.675,0.525,1.32)); +#62210 = VECTOR('',#62211,1.); +#62211 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#62212 = ORIENTED_EDGE('',*,*,#62213,.F.); +#62213 = EDGE_CURVE('',#61284,#62206,#62214,.T.); +#62214 = CIRCLE('',#62215,0.15); +#62215 = AXIS2_PLACEMENT_3D('',#62216,#62217,#62218); +#62216 = CARTESIAN_POINT('',(2.825,0.675,1.32)); +#62217 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#62218 = DIRECTION('',(-1.,0.,-7.2E-16)); +#62219 = ORIENTED_EDGE('',*,*,#61291,.F.); +#62220 = ORIENTED_EDGE('',*,*,#61299,.F.); +#62221 = ORIENTED_EDGE('',*,*,#61307,.F.); +#62222 = ORIENTED_EDGE('',*,*,#61445,.T.); +#62223 = PLANE('',#62224); +#62224 = AXIS2_PLACEMENT_3D('',#62225,#62226,#62227); +#62225 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#62226 = DIRECTION('',(-5.6E-16,3.3E-16,1.)); +#62227 = DIRECTION('',(6.7E-16,1.,-3.3E-16)); +#62228 = ADVANCED_FACE('',(#62229),#62247,.T.); +#62229 = FACE_BOUND('',#62230,.F.); +#62230 = EDGE_LOOP('',(#62231,#62232,#62240)); +#62231 = ORIENTED_EDGE('',*,*,#61332,.T.); +#62232 = ORIENTED_EDGE('',*,*,#62233,.T.); +#62233 = EDGE_CURVE('',#61325,#62234,#62236,.T.); +#62234 = VERTEX_POINT('',#62235); +#62235 = CARTESIAN_POINT('',(-2.825,0.525,1.32)); +#62236 = LINE('',#62237,#62238); +#62237 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#62238 = VECTOR('',#62239,1.); +#62239 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62240 = ORIENTED_EDGE('',*,*,#62241,.F.); +#62241 = EDGE_CURVE('',#61333,#62234,#62242,.T.); +#62242 = CIRCLE('',#62243,0.15); +#62243 = AXIS2_PLACEMENT_3D('',#62244,#62245,#62246); +#62244 = CARTESIAN_POINT('',(-2.825,0.675,1.32)); +#62245 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#62246 = DIRECTION('',(1.,-1.11E-15,-6.E-17)); +#62247 = PLANE('',#62248); +#62248 = AXIS2_PLACEMENT_3D('',#62249,#62250,#62251); +#62249 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62250 = DIRECTION('',(-1.1E-16,1.1E-16,1.)); +#62251 = DIRECTION('',(-4.4E-16,-1.,1.1E-16)); +#62252 = ADVANCED_FACE('',(#62253),#62273,.T.); +#62253 = FACE_BOUND('',#62254,.F.); +#62254 = EDGE_LOOP('',(#62255,#62256,#62257,#62265,#62271,#62272)); +#62255 = ORIENTED_EDGE('',*,*,#62157,.T.); +#62256 = ORIENTED_EDGE('',*,*,#62142,.T.); +#62257 = ORIENTED_EDGE('',*,*,#62258,.T.); +#62258 = EDGE_CURVE('',#62135,#62259,#62261,.T.); +#62259 = VERTEX_POINT('',#62260); +#62260 = CARTESIAN_POINT('',(-2.925,0.525,1.32)); +#62261 = LINE('',#62262,#62263); +#62262 = CARTESIAN_POINT('',(-2.925,-0.525,1.32)); +#62263 = VECTOR('',#62264,1.); +#62264 = DIRECTION('',(5.6E-16,1.,-4.4E-16)); +#62265 = ORIENTED_EDGE('',*,*,#62266,.F.); +#62266 = EDGE_CURVE('',#62234,#62259,#62267,.T.); +#62267 = LINE('',#62268,#62269); +#62268 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#62269 = VECTOR('',#62270,1.); +#62270 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62271 = ORIENTED_EDGE('',*,*,#62233,.F.); +#62272 = ORIENTED_EDGE('',*,*,#61324,.F.); +#62273 = PLANE('',#62274); +#62274 = AXIS2_PLACEMENT_3D('',#62275,#62276,#62277); +#62275 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62276 = DIRECTION('',(-1.1E-16,1.1E-16,1.)); +#62277 = DIRECTION('',(-4.4E-16,-1.,1.1E-16)); +#62278 = ADVANCED_FACE('',(#62279),#62316,.F.); +#62279 = FACE_BOUND('',#62280,.F.); +#62280 = EDGE_LOOP('',(#62281,#62282,#62295,#62305)); +#62281 = ORIENTED_EDGE('',*,*,#61356,.T.); +#62282 = ORIENTED_EDGE('',*,*,#62283,.T.); +#62283 = EDGE_CURVE('',#61359,#62284,#62286,.T.); +#62284 = VERTEX_POINT('',#62285); +#62285 = CARTESIAN_POINT('',(2.134020897087,-0.942322063626, + 1.699874109893)); +#62286 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62287,#62288,#62289,#62290, + #62291,#62292,#62293,#62294),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62287 = CARTESIAN_POINT('',(2.29897305193,-1.107274218468,1.2916032)); +#62288 = CARTESIAN_POINT('',(2.296104788947,-1.104405955486,1.2987024)); +#62289 = CARTESIAN_POINT('',(2.293236525965,-1.101537692504,1.3058016)); +#62290 = CARTESIAN_POINT('',(2.290368262982,-1.098669429521,1.3129008)); +#62291 = CARTESIAN_POINT('',(2.231248485851,-1.039549652389, + 1.459227383156)); +#62292 = CARTESIAN_POINT('',(2.174996971701,-0.98329813824, + 1.598454766312)); +#62293 = CARTESIAN_POINT('',(2.118745457552,-0.92704662409, + 1.737682149468)); +#62294 = CARTESIAN_POINT('',(2.062493943402,-0.870795109941, + 1.876909532624)); +#62295 = ORIENTED_EDGE('',*,*,#62296,.F.); +#62296 = EDGE_CURVE('',#62297,#62284,#62299,.T.); +#62297 = VERTEX_POINT('',#62298); +#62298 = CARTESIAN_POINT('',(2.134020897087,0.942322063626, + 1.699874109893)); +#62299 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62300,#62301,#62302,#62303, + #62304),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#62300 = CARTESIAN_POINT('',(2.134020897087,1.324076519193, + 1.699874109893)); +#62301 = CARTESIAN_POINT('',(2.134020897087,1.28154870814,1.699874109893 + )); +#62302 = CARTESIAN_POINT('',(2.134020897087,8.9E-16,1.699874109893)); +#62303 = CARTESIAN_POINT('',(2.134020897087,-1.28154870814, + 1.699874109893)); +#62304 = CARTESIAN_POINT('',(2.134020897087,-1.324076519193, + 1.699874109893)); +#62305 = ORIENTED_EDGE('',*,*,#62306,.F.); +#62306 = EDGE_CURVE('',#61357,#62297,#62307,.T.); +#62307 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62308,#62309,#62310,#62311, + #62312,#62313,#62314,#62315),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62308 = CARTESIAN_POINT('',(2.29897305193,1.107274218468,1.2916032)); +#62309 = CARTESIAN_POINT('',(2.296104788947,1.104405955486,1.2987024)); +#62310 = CARTESIAN_POINT('',(2.293236525965,1.101537692504,1.3058016)); +#62311 = CARTESIAN_POINT('',(2.290368262982,1.098669429521,1.3129008)); +#62312 = CARTESIAN_POINT('',(2.231248485851,1.039549652389, + 1.459227383156)); +#62313 = CARTESIAN_POINT('',(2.174996971701,0.98329813824,1.598454766312 + )); +#62314 = CARTESIAN_POINT('',(2.118745457552,0.92704662409,1.737682149468 + )); +#62315 = CARTESIAN_POINT('',(2.062493943402,0.870795109941, + 1.876909532624)); +#62316 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62317,#62318) + ,(#62319,#62320 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62317 = CARTESIAN_POINT('',(2.2875,1.3925,1.32)); +#62318 = CARTESIAN_POINT('',(2.053164789016,1.158164789016,1.9)); +#62319 = CARTESIAN_POINT('',(2.2875,-1.3925,1.32)); +#62320 = CARTESIAN_POINT('',(2.053164789016,-1.158164789016,1.9)); +#62321 = ADVANCED_FACE('',(#62322),#62346,.T.); +#62322 = FACE_BOUND('',#62323,.T.); +#62323 = EDGE_LOOP('',(#62324,#62325,#62338,#62345)); +#62324 = ORIENTED_EDGE('',*,*,#61366,.T.); +#62325 = ORIENTED_EDGE('',*,*,#62326,.T.); +#62326 = EDGE_CURVE('',#61367,#62327,#62329,.T.); +#62327 = VERTEX_POINT('',#62328); +#62328 = CARTESIAN_POINT('',(1.837322063626,1.239020897087, + 1.699874109893)); +#62329 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62330,#62331,#62332,#62333, + #62334,#62335,#62336,#62337),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62330 = CARTESIAN_POINT('',(2.002274218468,1.40397305193,1.2916032)); +#62331 = CARTESIAN_POINT('',(1.999405955486,1.401104788947,1.2987024)); +#62332 = CARTESIAN_POINT('',(1.996537692504,1.398236525965,1.3058016)); +#62333 = CARTESIAN_POINT('',(1.993669429521,1.395368262982,1.3129008)); +#62334 = CARTESIAN_POINT('',(1.934549652389,1.336248485851, + 1.459227383156)); +#62335 = CARTESIAN_POINT('',(1.87829813824,1.279996971701,1.598454766312 + )); +#62336 = CARTESIAN_POINT('',(1.82204662409,1.223745457552,1.737682149468 + )); +#62337 = CARTESIAN_POINT('',(1.765795109941,1.167493943402, + 1.876909532624)); +#62338 = ORIENTED_EDGE('',*,*,#62339,.T.); +#62339 = EDGE_CURVE('',#62327,#62297,#62340,.T.); +#62340 = CIRCLE('',#62341,0.32); +#62341 = AXIS2_PLACEMENT_3D('',#62342,#62343,#62344); +#62342 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#62343 = DIRECTION('',(0.350800434887,0.350800434887,-0.868261544562)); +#62344 = DIRECTION('',(6.501229570851E-14,0.927183854567,0.374606593416) + ); +#62345 = ORIENTED_EDGE('',*,*,#62306,.F.); +#62346 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62347,#62348,#62349,#62350,#62351,#62352,#62353,#62354) + ,(#62355,#62356,#62357,#62358,#62359,#62360,#62361,#62362) + ,(#62363,#62364,#62365,#62366,#62367,#62368,#62369,#62370 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62347 = CARTESIAN_POINT('',(2.29897305193,1.107274218468,1.2916032)); +#62348 = CARTESIAN_POINT('',(2.296104788947,1.104405955486,1.2987024)); +#62349 = CARTESIAN_POINT('',(2.293236525965,1.101537692504,1.3058016)); +#62350 = CARTESIAN_POINT('',(2.290368262982,1.098669429521,1.3129008)); +#62351 = CARTESIAN_POINT('',(2.231248485851,1.039549652389, + 1.459227383156)); +#62352 = CARTESIAN_POINT('',(2.174996971701,0.98329813824,1.598454766312 + )); +#62353 = CARTESIAN_POINT('',(2.118745457552,0.92704662409,1.737682149468 + )); +#62354 = CARTESIAN_POINT('',(2.062493943402,0.870795109941, + 1.876909532624)); +#62355 = CARTESIAN_POINT('',(2.262461013069,1.367461013069, + 1.381973667376)); +#62356 = CARTESIAN_POINT('',(2.259592750086,1.364592750086, + 1.389072867376)); +#62357 = CARTESIAN_POINT('',(2.256724487104,1.361724487104, + 1.396172067376)); +#62358 = CARTESIAN_POINT('',(2.253856224122,1.358856224122, + 1.403271267376)); +#62359 = CARTESIAN_POINT('',(2.19473644699,1.29973644699,1.549597850532) + ); +#62360 = CARTESIAN_POINT('',(2.13848493284,1.24348493284,1.688825233688) + ); +#62361 = CARTESIAN_POINT('',(2.082233418691,1.187233418691, + 1.828052616844)); +#62362 = CARTESIAN_POINT('',(2.025981904541,1.130981904541,1.96728)); +#62363 = CARTESIAN_POINT('',(2.002274218468,1.40397305193,1.2916032)); +#62364 = CARTESIAN_POINT('',(1.999405955486,1.401104788947,1.2987024)); +#62365 = CARTESIAN_POINT('',(1.996537692504,1.398236525965,1.3058016)); +#62366 = CARTESIAN_POINT('',(1.993669429521,1.395368262982,1.3129008)); +#62367 = CARTESIAN_POINT('',(1.934549652389,1.336248485851, + 1.459227383156)); +#62368 = CARTESIAN_POINT('',(1.87829813824,1.279996971701,1.598454766312 + )); +#62369 = CARTESIAN_POINT('',(1.82204662409,1.223745457552,1.737682149468 + )); +#62370 = CARTESIAN_POINT('',(1.765795109941,1.167493943402, + 1.876909532624)); +#62371 = ADVANCED_FACE('',(#62372),#62396,.F.); +#62372 = FACE_BOUND('',#62373,.F.); +#62373 = EDGE_LOOP('',(#62374,#62375,#62388,#62395)); +#62374 = ORIENTED_EDGE('',*,*,#61426,.T.); +#62375 = ORIENTED_EDGE('',*,*,#62376,.T.); +#62376 = EDGE_CURVE('',#61419,#62377,#62379,.T.); +#62377 = VERTEX_POINT('',#62378); +#62378 = CARTESIAN_POINT('',(1.837322063626,-1.239020897087, + 1.699874109893)); +#62379 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62380,#62381,#62382,#62383, + #62384,#62385,#62386,#62387),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62380 = CARTESIAN_POINT('',(2.002274218468,-1.40397305193,1.2916032)); +#62381 = CARTESIAN_POINT('',(1.999405955486,-1.401104788947,1.2987024)); +#62382 = CARTESIAN_POINT('',(1.996537692504,-1.398236525965,1.3058016)); +#62383 = CARTESIAN_POINT('',(1.993669429521,-1.395368262982,1.3129008)); +#62384 = CARTESIAN_POINT('',(1.934549652389,-1.336248485851, + 1.459227383156)); +#62385 = CARTESIAN_POINT('',(1.87829813824,-1.279996971701, + 1.598454766312)); +#62386 = CARTESIAN_POINT('',(1.82204662409,-1.223745457552, + 1.737682149468)); +#62387 = CARTESIAN_POINT('',(1.765795109941,-1.167493943402, + 1.876909532624)); +#62388 = ORIENTED_EDGE('',*,*,#62389,.T.); +#62389 = EDGE_CURVE('',#62377,#62284,#62390,.T.); +#62390 = CIRCLE('',#62391,0.32); +#62391 = AXIS2_PLACEMENT_3D('',#62392,#62393,#62394); +#62392 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#62393 = DIRECTION('',(-0.350800434887,0.350800434887,0.868261544562)); +#62394 = DIRECTION('',(6.321042565431E-14,-0.927183854567,0.374606593416 + )); +#62395 = ORIENTED_EDGE('',*,*,#62283,.F.); +#62396 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62397,#62398,#62399,#62400,#62401,#62402,#62403,#62404) + ,(#62405,#62406,#62407,#62408,#62409,#62410,#62411,#62412) + ,(#62413,#62414,#62415,#62416,#62417,#62418,#62419,#62420 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62397 = CARTESIAN_POINT('',(2.29897305193,-1.107274218468,1.2916032)); +#62398 = CARTESIAN_POINT('',(2.296104788947,-1.104405955486,1.2987024)); +#62399 = CARTESIAN_POINT('',(2.293236525965,-1.101537692504,1.3058016)); +#62400 = CARTESIAN_POINT('',(2.290368262982,-1.098669429521,1.3129008)); +#62401 = CARTESIAN_POINT('',(2.231248485851,-1.039549652389, + 1.459227383156)); +#62402 = CARTESIAN_POINT('',(2.174996971701,-0.98329813824, + 1.598454766312)); +#62403 = CARTESIAN_POINT('',(2.118745457552,-0.92704662409, + 1.737682149468)); +#62404 = CARTESIAN_POINT('',(2.062493943402,-0.870795109941, + 1.876909532624)); +#62405 = CARTESIAN_POINT('',(2.262461013069,-1.367461013069, + 1.381973667376)); +#62406 = CARTESIAN_POINT('',(2.259592750086,-1.364592750086, + 1.389072867376)); +#62407 = CARTESIAN_POINT('',(2.256724487104,-1.361724487104, + 1.396172067376)); +#62408 = CARTESIAN_POINT('',(2.253856224122,-1.358856224122, + 1.403271267376)); +#62409 = CARTESIAN_POINT('',(2.19473644699,-1.29973644699,1.549597850532 + )); +#62410 = CARTESIAN_POINT('',(2.13848493284,-1.24348493284,1.688825233688 + )); +#62411 = CARTESIAN_POINT('',(2.082233418691,-1.187233418691, + 1.828052616844)); +#62412 = CARTESIAN_POINT('',(2.025981904541,-1.130981904541,1.96728)); +#62413 = CARTESIAN_POINT('',(2.002274218468,-1.40397305193,1.2916032)); +#62414 = CARTESIAN_POINT('',(1.999405955486,-1.401104788947,1.2987024)); +#62415 = CARTESIAN_POINT('',(1.996537692504,-1.398236525965,1.3058016)); +#62416 = CARTESIAN_POINT('',(1.993669429521,-1.395368262982,1.3129008)); +#62417 = CARTESIAN_POINT('',(1.934549652389,-1.336248485851, + 1.459227383156)); +#62418 = CARTESIAN_POINT('',(1.87829813824,-1.279996971701, + 1.598454766312)); +#62419 = CARTESIAN_POINT('',(1.82204662409,-1.223745457552, + 1.737682149468)); +#62420 = CARTESIAN_POINT('',(1.765795109941,-1.167493943402, + 1.876909532624)); +#62421 = ADVANCED_FACE('',(#62422),#62447,.F.); +#62422 = FACE_BOUND('',#62423,.F.); +#62423 = EDGE_LOOP('',(#62424,#62425,#62426,#62436)); +#62424 = ORIENTED_EDGE('',*,*,#61378,.T.); +#62425 = ORIENTED_EDGE('',*,*,#62326,.T.); +#62426 = ORIENTED_EDGE('',*,*,#62427,.F.); +#62427 = EDGE_CURVE('',#62428,#62327,#62430,.T.); +#62428 = VERTEX_POINT('',#62429); +#62429 = CARTESIAN_POINT('',(-1.837322063626,1.239020897087, + 1.699874109893)); +#62430 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62431,#62432,#62433,#62434, + #62435),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#62431 = CARTESIAN_POINT('',(-2.284805319193,1.239020897087, + 1.699874109893)); +#62432 = CARTESIAN_POINT('',(-2.20941310814,1.239020897087, + 1.699874109893)); +#62433 = CARTESIAN_POINT('',(0.,1.239020897087,1.699874109893)); +#62434 = CARTESIAN_POINT('',(2.20941310814,1.239020897087,1.699874109893 + )); +#62435 = CARTESIAN_POINT('',(2.284805319193,1.239020897087, + 1.699874109893)); +#62436 = ORIENTED_EDGE('',*,*,#62437,.F.); +#62437 = EDGE_CURVE('',#61379,#62428,#62438,.T.); +#62438 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62439,#62440,#62441,#62442, + #62443,#62444,#62445,#62446),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62439 = CARTESIAN_POINT('',(-2.002274218468,1.40397305193,1.2916032)); +#62440 = CARTESIAN_POINT('',(-1.999405955486,1.401104788947,1.2987024)); +#62441 = CARTESIAN_POINT('',(-1.996537692504,1.398236525965,1.3058016)); +#62442 = CARTESIAN_POINT('',(-1.993669429521,1.395368262982,1.3129008)); +#62443 = CARTESIAN_POINT('',(-1.934549652389,1.336248485851, + 1.459227383156)); +#62444 = CARTESIAN_POINT('',(-1.87829813824,1.279996971701, + 1.598454766312)); +#62445 = CARTESIAN_POINT('',(-1.82204662409,1.223745457552, + 1.737682149468)); +#62446 = CARTESIAN_POINT('',(-1.765795109941,1.167493943402, + 1.876909532624)); +#62447 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62448,#62449) + ,(#62450,#62451 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.575),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62448 = CARTESIAN_POINT('',(-2.2875,1.3925,1.32)); +#62449 = CARTESIAN_POINT('',(-2.053164789016,1.158164789016,1.9)); +#62450 = CARTESIAN_POINT('',(2.2875,1.3925,1.32)); +#62451 = CARTESIAN_POINT('',(2.053164789016,1.158164789016,1.9)); +#62452 = ADVANCED_FACE('',(#62453),#62478,.F.); +#62453 = FACE_BOUND('',#62454,.F.); +#62454 = EDGE_LOOP('',(#62455,#62456,#62469,#62477)); +#62455 = ORIENTED_EDGE('',*,*,#61418,.T.); +#62456 = ORIENTED_EDGE('',*,*,#62457,.T.); +#62457 = EDGE_CURVE('',#61407,#62458,#62460,.T.); +#62458 = VERTEX_POINT('',#62459); +#62459 = CARTESIAN_POINT('',(-1.837322063626,-1.239020897087, + 1.699874109893)); +#62460 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62461,#62462,#62463,#62464, + #62465,#62466,#62467,#62468),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62461 = CARTESIAN_POINT('',(-2.002274218468,-1.40397305193,1.2916032)); +#62462 = CARTESIAN_POINT('',(-1.999405955486,-1.401104788947,1.2987024) + ); +#62463 = CARTESIAN_POINT('',(-1.996537692504,-1.398236525965,1.3058016) + ); +#62464 = CARTESIAN_POINT('',(-1.993669429521,-1.395368262982,1.3129008) + ); +#62465 = CARTESIAN_POINT('',(-1.934549652389,-1.336248485851, + 1.459227383156)); +#62466 = CARTESIAN_POINT('',(-1.87829813824,-1.279996971701, + 1.598454766312)); +#62467 = CARTESIAN_POINT('',(-1.82204662409,-1.223745457552, + 1.737682149468)); +#62468 = CARTESIAN_POINT('',(-1.765795109941,-1.167493943402, + 1.876909532624)); +#62469 = ORIENTED_EDGE('',*,*,#62470,.F.); +#62470 = EDGE_CURVE('',#62377,#62458,#62471,.T.); +#62471 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62472,#62473,#62474,#62475, + #62476),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#62472 = CARTESIAN_POINT('',(2.284805319193,-1.239020897087, + 1.699874109893)); +#62473 = CARTESIAN_POINT('',(2.20941310814,-1.239020897087, + 1.699874109893)); +#62474 = CARTESIAN_POINT('',(-1.33E-15,-1.239020897087,1.699874109893)); +#62475 = CARTESIAN_POINT('',(-2.20941310814,-1.239020897087, + 1.699874109893)); +#62476 = CARTESIAN_POINT('',(-2.284805319193,-1.239020897087, + 1.699874109893)); +#62477 = ORIENTED_EDGE('',*,*,#62376,.F.); +#62478 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62479,#62480) + ,(#62481,#62482 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.575),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62479 = CARTESIAN_POINT('',(2.2875,-1.3925,1.32)); +#62480 = CARTESIAN_POINT('',(2.053164789016,-1.158164789016,1.9)); +#62481 = CARTESIAN_POINT('',(-2.2875,-1.3925,1.32)); +#62482 = CARTESIAN_POINT('',(-2.053164789016,-1.158164789016,1.9)); +#62483 = ADVANCED_FACE('',(#62484),#62508,.F.); +#62484 = FACE_BOUND('',#62485,.F.); +#62485 = EDGE_LOOP('',(#62486,#62487,#62488,#62497)); +#62486 = ORIENTED_EDGE('',*,*,#61386,.T.); +#62487 = ORIENTED_EDGE('',*,*,#62437,.T.); +#62488 = ORIENTED_EDGE('',*,*,#62489,.F.); +#62489 = EDGE_CURVE('',#62490,#62428,#62492,.T.); +#62490 = VERTEX_POINT('',#62491); +#62491 = CARTESIAN_POINT('',(-2.134020897087,0.942322063626, + 1.699874109893)); +#62492 = CIRCLE('',#62493,0.32); +#62493 = AXIS2_PLACEMENT_3D('',#62494,#62495,#62496); +#62494 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#62495 = DIRECTION('',(-0.350800434886,0.350800434886,-0.868261544563)); +#62496 = DIRECTION('',(-0.927183854567,5.243626610226E-13,0.374606593415 + )); +#62497 = ORIENTED_EDGE('',*,*,#62498,.F.); +#62498 = EDGE_CURVE('',#61387,#62490,#62499,.T.); +#62499 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62500,#62501,#62502,#62503, + #62504,#62505,#62506,#62507),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62500 = CARTESIAN_POINT('',(-2.29897305193,1.107274218468,1.2916032)); +#62501 = CARTESIAN_POINT('',(-2.296104788947,1.104405955486,1.2987024)); +#62502 = CARTESIAN_POINT('',(-2.293236525965,1.101537692504,1.3058016)); +#62503 = CARTESIAN_POINT('',(-2.290368262982,1.098669429521,1.3129008)); +#62504 = CARTESIAN_POINT('',(-2.231248485851,1.039549652389, + 1.459227383156)); +#62505 = CARTESIAN_POINT('',(-2.174996971701,0.98329813824, + 1.598454766312)); +#62506 = CARTESIAN_POINT('',(-2.118745457552,0.92704662409, + 1.737682149468)); +#62507 = CARTESIAN_POINT('',(-2.062493943402,0.870795109941, + 1.876909532624)); +#62508 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62509,#62510,#62511,#62512,#62513,#62514,#62515,#62516) + ,(#62517,#62518,#62519,#62520,#62521,#62522,#62523,#62524) + ,(#62525,#62526,#62527,#62528,#62529,#62530,#62531,#62532 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62509 = CARTESIAN_POINT('',(-2.29897305193,1.107274218468,1.2916032)); +#62510 = CARTESIAN_POINT('',(-2.296104788947,1.104405955486,1.2987024)); +#62511 = CARTESIAN_POINT('',(-2.293236525965,1.101537692504,1.3058016)); +#62512 = CARTESIAN_POINT('',(-2.290368262982,1.098669429521,1.3129008)); +#62513 = CARTESIAN_POINT('',(-2.231248485851,1.039549652389, + 1.459227383156)); +#62514 = CARTESIAN_POINT('',(-2.174996971701,0.98329813824, + 1.598454766312)); +#62515 = CARTESIAN_POINT('',(-2.118745457552,0.92704662409, + 1.737682149468)); +#62516 = CARTESIAN_POINT('',(-2.062493943402,0.870795109941, + 1.876909532624)); +#62517 = CARTESIAN_POINT('',(-2.262461013069,1.367461013069, + 1.381973667376)); +#62518 = CARTESIAN_POINT('',(-2.259592750086,1.364592750086, + 1.389072867376)); +#62519 = CARTESIAN_POINT('',(-2.256724487104,1.361724487104, + 1.396172067376)); +#62520 = CARTESIAN_POINT('',(-2.253856224122,1.358856224122, + 1.403271267376)); +#62521 = CARTESIAN_POINT('',(-2.19473644699,1.29973644699,1.549597850532 + )); +#62522 = CARTESIAN_POINT('',(-2.13848493284,1.24348493284,1.688825233688 + )); +#62523 = CARTESIAN_POINT('',(-2.082233418691,1.187233418691, + 1.828052616844)); +#62524 = CARTESIAN_POINT('',(-2.025981904541,1.130981904541,1.96728)); +#62525 = CARTESIAN_POINT('',(-2.002274218468,1.40397305193,1.2916032)); +#62526 = CARTESIAN_POINT('',(-1.999405955486,1.401104788947,1.2987024)); +#62527 = CARTESIAN_POINT('',(-1.996537692504,1.398236525965,1.3058016)); +#62528 = CARTESIAN_POINT('',(-1.993669429521,1.395368262982,1.3129008)); +#62529 = CARTESIAN_POINT('',(-1.934549652389,1.336248485851, + 1.459227383156)); +#62530 = CARTESIAN_POINT('',(-1.87829813824,1.279996971701, + 1.598454766312)); +#62531 = CARTESIAN_POINT('',(-1.82204662409,1.223745457552, + 1.737682149468)); +#62532 = CARTESIAN_POINT('',(-1.765795109941,1.167493943402, + 1.876909532624)); +#62533 = ADVANCED_FACE('',(#62534),#62558,.F.); +#62534 = FACE_BOUND('',#62535,.F.); +#62535 = EDGE_LOOP('',(#62536,#62537,#62550,#62557)); +#62536 = ORIENTED_EDGE('',*,*,#61406,.T.); +#62537 = ORIENTED_EDGE('',*,*,#62538,.T.); +#62538 = EDGE_CURVE('',#61399,#62539,#62541,.T.); +#62539 = VERTEX_POINT('',#62540); +#62540 = CARTESIAN_POINT('',(-2.134020897087,-0.942322063626, + 1.699874109893)); +#62541 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62542,#62543,#62544,#62545, + #62546,#62547,#62548,#62549),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62542 = CARTESIAN_POINT('',(-2.29897305193,-1.107274218468,1.2916032)); +#62543 = CARTESIAN_POINT('',(-2.296104788947,-1.104405955486,1.2987024) + ); +#62544 = CARTESIAN_POINT('',(-2.293236525965,-1.101537692504,1.3058016) + ); +#62545 = CARTESIAN_POINT('',(-2.290368262982,-1.098669429521,1.3129008) + ); +#62546 = CARTESIAN_POINT('',(-2.231248485851,-1.039549652389, + 1.459227383156)); +#62547 = CARTESIAN_POINT('',(-2.174996971701,-0.98329813824, + 1.598454766312)); +#62548 = CARTESIAN_POINT('',(-2.118745457552,-0.92704662409, + 1.737682149468)); +#62549 = CARTESIAN_POINT('',(-2.062493943402,-0.870795109941, + 1.876909532624)); +#62550 = ORIENTED_EDGE('',*,*,#62551,.F.); +#62551 = EDGE_CURVE('',#62458,#62539,#62552,.T.); +#62552 = CIRCLE('',#62553,0.32); +#62553 = AXIS2_PLACEMENT_3D('',#62554,#62555,#62556); +#62554 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#62555 = DIRECTION('',(-0.350800434887,-0.350800434887,-0.868261544562) + ); +#62556 = DIRECTION('',(-6.379620159899E-14,-0.927183854567, + 0.374606593416)); +#62557 = ORIENTED_EDGE('',*,*,#62457,.F.); +#62558 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62559,#62560,#62561,#62562,#62563,#62564,#62565,#62566) + ,(#62567,#62568,#62569,#62570,#62571,#62572,#62573,#62574) + ,(#62575,#62576,#62577,#62578,#62579,#62580,#62581,#62582 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62559 = CARTESIAN_POINT('',(-2.002274218468,-1.40397305193,1.2916032)); +#62560 = CARTESIAN_POINT('',(-1.999405955486,-1.401104788947,1.2987024) + ); +#62561 = CARTESIAN_POINT('',(-1.996537692504,-1.398236525965,1.3058016) + ); +#62562 = CARTESIAN_POINT('',(-1.993669429521,-1.395368262982,1.3129008) + ); +#62563 = CARTESIAN_POINT('',(-1.934549652389,-1.336248485851, + 1.459227383156)); +#62564 = CARTESIAN_POINT('',(-1.87829813824,-1.279996971701, + 1.598454766312)); +#62565 = CARTESIAN_POINT('',(-1.82204662409,-1.223745457552, + 1.737682149468)); +#62566 = CARTESIAN_POINT('',(-1.765795109941,-1.167493943402, + 1.876909532624)); +#62567 = CARTESIAN_POINT('',(-2.262461013069,-1.367461013069, + 1.381973667376)); +#62568 = CARTESIAN_POINT('',(-2.259592750086,-1.364592750086, + 1.389072867376)); +#62569 = CARTESIAN_POINT('',(-2.256724487104,-1.361724487104, + 1.396172067376)); +#62570 = CARTESIAN_POINT('',(-2.253856224122,-1.358856224122, + 1.403271267376)); +#62571 = CARTESIAN_POINT('',(-2.19473644699,-1.29973644699, + 1.549597850532)); +#62572 = CARTESIAN_POINT('',(-2.13848493284,-1.24348493284, + 1.688825233688)); +#62573 = CARTESIAN_POINT('',(-2.082233418691,-1.187233418691, + 1.828052616844)); +#62574 = CARTESIAN_POINT('',(-2.025981904541,-1.130981904541,1.96728)); +#62575 = CARTESIAN_POINT('',(-2.29897305193,-1.107274218468,1.2916032)); +#62576 = CARTESIAN_POINT('',(-2.296104788947,-1.104405955486,1.2987024) + ); +#62577 = CARTESIAN_POINT('',(-2.293236525965,-1.101537692504,1.3058016) + ); +#62578 = CARTESIAN_POINT('',(-2.290368262982,-1.098669429521,1.3129008) + ); +#62579 = CARTESIAN_POINT('',(-2.231248485851,-1.039549652389, + 1.459227383156)); +#62580 = CARTESIAN_POINT('',(-2.174996971701,-0.98329813824, + 1.598454766312)); +#62581 = CARTESIAN_POINT('',(-2.118745457552,-0.92704662409, + 1.737682149468)); +#62582 = CARTESIAN_POINT('',(-2.062493943402,-0.870795109941, + 1.876909532624)); +#62583 = ADVANCED_FACE('',(#62584),#62597,.F.); +#62584 = FACE_BOUND('',#62585,.F.); +#62585 = EDGE_LOOP('',(#62586,#62587,#62588,#62596)); +#62586 = ORIENTED_EDGE('',*,*,#61398,.T.); +#62587 = ORIENTED_EDGE('',*,*,#62498,.T.); +#62588 = ORIENTED_EDGE('',*,*,#62589,.F.); +#62589 = EDGE_CURVE('',#62539,#62490,#62590,.T.); +#62590 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62591,#62592,#62593,#62594, + #62595),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#62591 = CARTESIAN_POINT('',(-2.134020897087,-1.324076519193, + 1.699874109893)); +#62592 = CARTESIAN_POINT('',(-2.134020897087,-1.28154870814, + 1.699874109893)); +#62593 = CARTESIAN_POINT('',(-2.134020897087,1.11E-15,1.699874109893)); +#62594 = CARTESIAN_POINT('',(-2.134020897087,1.28154870814, + 1.699874109893)); +#62595 = CARTESIAN_POINT('',(-2.134020897087,1.324076519193, + 1.699874109893)); +#62596 = ORIENTED_EDGE('',*,*,#62538,.F.); +#62597 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62598,#62599) + ,(#62600,#62601 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62598 = CARTESIAN_POINT('',(-2.2875,-1.3925,1.32)); +#62599 = CARTESIAN_POINT('',(-2.053164789016,-1.158164789016,1.9)); +#62600 = CARTESIAN_POINT('',(-2.2875,1.3925,1.32)); +#62601 = CARTESIAN_POINT('',(-2.053164789016,1.158164789016,1.9)); +#62602 = ADVANCED_FACE('',(#62603),#62614,.T.); +#62603 = FACE_BOUND('',#62604,.T.); +#62604 = EDGE_LOOP('',(#62605,#62606,#62612,#62613)); +#62605 = ORIENTED_EDGE('',*,*,#61709,.T.); +#62606 = ORIENTED_EDGE('',*,*,#62607,.T.); +#62607 = EDGE_CURVE('',#61702,#62190,#62608,.T.); +#62608 = LINE('',#62609,#62610); +#62609 = CARTESIAN_POINT('',(2.925,-0.525,1.2)); +#62610 = VECTOR('',#62611,1.); +#62611 = DIRECTION('',(0.,0.,1.)); +#62612 = ORIENTED_EDGE('',*,*,#62189,.F.); +#62613 = ORIENTED_EDGE('',*,*,#61454,.F.); +#62614 = PLANE('',#62615); +#62615 = AXIS2_PLACEMENT_3D('',#62616,#62617,#62618); +#62616 = CARTESIAN_POINT('',(2.675,-0.525,1.2)); +#62617 = DIRECTION('',(-1.11E-15,-1.,1.1E-16)); +#62618 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#62619 = ADVANCED_FACE('',(#62620),#62639,.F.); +#62620 = FACE_BOUND('',#62621,.T.); +#62621 = EDGE_LOOP('',(#62622,#62623,#62624,#62633)); +#62622 = ORIENTED_EDGE('',*,*,#61535,.T.); +#62623 = ORIENTED_EDGE('',*,*,#61478,.T.); +#62624 = ORIENTED_EDGE('',*,*,#62625,.F.); +#62625 = EDGE_CURVE('',#62626,#61479,#62628,.T.); +#62626 = VERTEX_POINT('',#62627); +#62627 = CARTESIAN_POINT('',(2.895,-1.68,0.66)); +#62628 = CIRCLE('',#62629,0.17); +#62629 = AXIS2_PLACEMENT_3D('',#62630,#62631,#62632); +#62630 = CARTESIAN_POINT('',(2.725,-1.68,0.66)); +#62631 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#62632 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#62633 = ORIENTED_EDGE('',*,*,#62634,.F.); +#62634 = EDGE_CURVE('',#61528,#62626,#62635,.T.); +#62635 = LINE('',#62636,#62637); +#62636 = CARTESIAN_POINT('',(2.775,-1.68,0.66)); +#62637 = VECTOR('',#62638,1.); +#62638 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#62639 = PLANE('',#62640); +#62640 = AXIS2_PLACEMENT_3D('',#62641,#62642,#62643); +#62641 = CARTESIAN_POINT('',(2.802781745931,-1.757781745931,0.66)); +#62642 = DIRECTION('',(2.6E-16,1.7E-16,-1.)); +#62643 = DIRECTION('',(0.707106781187,0.707106781187,3.040559159102E-16) + ); +#62644 = ADVANCED_FACE('',(#62645),#62664,.F.); +#62645 = FACE_BOUND('',#62646,.T.); +#62646 = EDGE_LOOP('',(#62647,#62656,#62657,#62658)); +#62647 = ORIENTED_EDGE('',*,*,#62648,.T.); +#62648 = EDGE_CURVE('',#62649,#61502,#62651,.T.); +#62649 = VERTEX_POINT('',#62650); +#62650 = CARTESIAN_POINT('',(2.895,-1.68,0.1)); +#62651 = CIRCLE('',#62652,0.17); +#62652 = AXIS2_PLACEMENT_3D('',#62653,#62654,#62655); +#62653 = CARTESIAN_POINT('',(2.725,-1.68,0.1)); +#62654 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#62655 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#62656 = ORIENTED_EDGE('',*,*,#61509,.T.); +#62657 = ORIENTED_EDGE('',*,*,#61543,.F.); +#62658 = ORIENTED_EDGE('',*,*,#62659,.F.); +#62659 = EDGE_CURVE('',#62649,#61526,#62660,.T.); +#62660 = LINE('',#62661,#62662); +#62661 = CARTESIAN_POINT('',(2.895,-1.68,0.1)); +#62662 = VECTOR('',#62663,1.); +#62663 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#62664 = PLANE('',#62665); +#62665 = AXIS2_PLACEMENT_3D('',#62666,#62667,#62668); +#62666 = CARTESIAN_POINT('',(2.802781745931,-1.757781745931,0.1)); +#62667 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#62668 = DIRECTION('',(0.707106781187,0.707106781187,3.040559159102E-16) + ); +#62669 = ADVANCED_FACE('',(#62670),#62713,.T.); +#62670 = FACE_BOUND('',#62671,.F.); +#62671 = EDGE_LOOP('',(#62672,#62680,#62689,#62697,#62706,#62712)); +#62672 = ORIENTED_EDGE('',*,*,#62673,.F.); +#62673 = EDGE_CURVE('',#62674,#61526,#62676,.T.); +#62674 = VERTEX_POINT('',#62675); +#62675 = CARTESIAN_POINT('',(2.775,-1.01,0.1)); +#62676 = LINE('',#62677,#62678); +#62677 = CARTESIAN_POINT('',(2.775,-0.87,0.1)); +#62678 = VECTOR('',#62679,1.); +#62679 = DIRECTION('',(8.3E-16,-1.,-1.1E-16)); +#62680 = ORIENTED_EDGE('',*,*,#62681,.T.); +#62681 = EDGE_CURVE('',#62674,#62682,#62684,.T.); +#62682 = VERTEX_POINT('',#62683); +#62683 = CARTESIAN_POINT('',(2.775,-0.87,0.24)); +#62684 = CIRCLE('',#62685,0.14); +#62685 = AXIS2_PLACEMENT_3D('',#62686,#62687,#62688); +#62686 = CARTESIAN_POINT('',(2.775,-1.01,0.24)); +#62687 = DIRECTION('',(1.,8.3E-16,4.7E-16)); +#62688 = DIRECTION('',(8.3E-16,-1.,6.7E-16)); +#62689 = ORIENTED_EDGE('',*,*,#62690,.T.); +#62690 = EDGE_CURVE('',#62682,#62691,#62693,.T.); +#62691 = VERTEX_POINT('',#62692); +#62692 = CARTESIAN_POINT('',(2.775,-0.87,0.52)); +#62693 = LINE('',#62694,#62695); +#62694 = CARTESIAN_POINT('',(2.775,-0.87,0.1)); +#62695 = VECTOR('',#62696,1.); +#62696 = DIRECTION('',(-1.39E-15,-3.9E-16,1.)); +#62697 = ORIENTED_EDGE('',*,*,#62698,.F.); +#62698 = EDGE_CURVE('',#62699,#62691,#62701,.T.); +#62699 = VERTEX_POINT('',#62700); +#62700 = CARTESIAN_POINT('',(2.775,-1.01,0.66)); +#62701 = CIRCLE('',#62702,0.14); +#62702 = AXIS2_PLACEMENT_3D('',#62703,#62704,#62705); +#62703 = CARTESIAN_POINT('',(2.775,-1.01,0.52)); +#62704 = DIRECTION('',(-1.,-8.3E-16,-1.17E-15)); +#62705 = DIRECTION('',(-8.3E-16,1.,-6.7E-16)); +#62706 = ORIENTED_EDGE('',*,*,#62707,.T.); +#62707 = EDGE_CURVE('',#62699,#61528,#62708,.T.); +#62708 = LINE('',#62709,#62710); +#62709 = CARTESIAN_POINT('',(2.775,-0.87,0.66)); +#62710 = VECTOR('',#62711,1.); +#62711 = DIRECTION('',(8.3E-16,-1.,-1.1E-16)); +#62712 = ORIENTED_EDGE('',*,*,#61525,.F.); +#62713 = PLANE('',#62714); +#62714 = AXIS2_PLACEMENT_3D('',#62715,#62716,#62717); +#62715 = CARTESIAN_POINT('',(2.775,-0.87,0.1)); +#62716 = DIRECTION('',(-1.,8.9E-16,-9.4E-16)); +#62717 = DIRECTION('',(9.4E-16,3.9E-16,-1.)); +#62718 = ADVANCED_FACE('',(#62719),#62730,.T.); +#62719 = FACE_BOUND('',#62720,.T.); +#62720 = EDGE_LOOP('',(#62721,#62722,#62728,#62729)); +#62721 = ORIENTED_EDGE('',*,*,#61668,.F.); +#62722 = ORIENTED_EDGE('',*,*,#62723,.T.); +#62723 = EDGE_CURVE('',#61669,#61576,#62724,.T.); +#62724 = LINE('',#62725,#62726); +#62725 = CARTESIAN_POINT('',(-2.895,-1.68,0.66)); +#62726 = VECTOR('',#62727,1.); +#62727 = DIRECTION('',(-1.7E-16,5.E-17,-1.)); +#62728 = ORIENTED_EDGE('',*,*,#61575,.T.); +#62729 = ORIENTED_EDGE('',*,*,#61559,.T.); +#62730 = CYLINDRICAL_SURFACE('',#62731,0.17); +#62731 = AXIS2_PLACEMENT_3D('',#62732,#62733,#62734); +#62732 = CARTESIAN_POINT('',(-2.725,-1.68,0.66)); +#62733 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#62734 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#62735 = ADVANCED_FACE('',(#62736),#62754,.T.); +#62736 = FACE_BOUND('',#62737,.T.); +#62737 = EDGE_LOOP('',(#62738,#62746,#62752,#62753)); +#62738 = ORIENTED_EDGE('',*,*,#62739,.F.); +#62739 = EDGE_CURVE('',#62740,#61576,#62742,.T.); +#62740 = VERTEX_POINT('',#62741); +#62741 = CARTESIAN_POINT('',(-2.895,-1.01,0.1)); +#62742 = LINE('',#62743,#62744); +#62743 = CARTESIAN_POINT('',(-2.895,-0.87,0.1)); +#62744 = VECTOR('',#62745,1.); +#62745 = DIRECTION('',(-4.4E-16,-1.,-5.E-17)); +#62746 = ORIENTED_EDGE('',*,*,#62747,.T.); +#62747 = EDGE_CURVE('',#62740,#61618,#62748,.T.); +#62748 = LINE('',#62749,#62750); +#62749 = CARTESIAN_POINT('',(-2.895,-1.01,0.1)); +#62750 = VECTOR('',#62751,1.); +#62751 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62752 = ORIENTED_EDGE('',*,*,#61617,.T.); +#62753 = ORIENTED_EDGE('',*,*,#61586,.F.); +#62754 = PLANE('',#62755); +#62755 = AXIS2_PLACEMENT_3D('',#62756,#62757,#62758); +#62756 = CARTESIAN_POINT('',(-2.895,-0.87,0.1)); +#62757 = DIRECTION('',(7.5E-16,-2.2E-16,-1.)); +#62758 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62759 = ADVANCED_FACE('',(#62760),#62771,.T.); +#62760 = FACE_BOUND('',#62761,.T.); +#62761 = EDGE_LOOP('',(#62762,#62763,#62764,#62770)); +#62762 = ORIENTED_EDGE('',*,*,#61601,.F.); +#62763 = ORIENTED_EDGE('',*,*,#62648,.F.); +#62764 = ORIENTED_EDGE('',*,*,#62765,.F.); +#62765 = EDGE_CURVE('',#62626,#62649,#62766,.T.); +#62766 = LINE('',#62767,#62768); +#62767 = CARTESIAN_POINT('',(2.895,-1.68,0.66)); +#62768 = VECTOR('',#62769,1.); +#62769 = DIRECTION('',(1.39E-15,3.9E-16,-1.)); +#62770 = ORIENTED_EDGE('',*,*,#62625,.T.); +#62771 = CYLINDRICAL_SURFACE('',#62772,0.17); +#62772 = AXIS2_PLACEMENT_3D('',#62773,#62774,#62775); +#62773 = CARTESIAN_POINT('',(2.725,-1.68,0.66)); +#62774 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#62775 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#62776 = ADVANCED_FACE('',(#62777),#62795,.T.); +#62777 = FACE_BOUND('',#62778,.T.); +#62778 = EDGE_LOOP('',(#62779,#62780,#62788,#62794)); +#62779 = ORIENTED_EDGE('',*,*,#61651,.F.); +#62780 = ORIENTED_EDGE('',*,*,#62781,.T.); +#62781 = EDGE_CURVE('',#61643,#62782,#62784,.T.); +#62782 = VERTEX_POINT('',#62783); +#62783 = CARTESIAN_POINT('',(-2.895,-1.01,0.66)); +#62784 = LINE('',#62785,#62786); +#62785 = CARTESIAN_POINT('',(-2.775,-1.01,0.66)); +#62786 = VECTOR('',#62787,1.); +#62787 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62788 = ORIENTED_EDGE('',*,*,#62789,.T.); +#62789 = EDGE_CURVE('',#62782,#61669,#62790,.T.); +#62790 = LINE('',#62791,#62792); +#62791 = CARTESIAN_POINT('',(-2.895,-0.87,0.66)); +#62792 = VECTOR('',#62793,1.); +#62793 = DIRECTION('',(-2.16E-15,-1.,2.2E-16)); +#62794 = ORIENTED_EDGE('',*,*,#61677,.F.); +#62795 = PLANE('',#62796); +#62796 = AXIS2_PLACEMENT_3D('',#62797,#62798,#62799); +#62797 = CARTESIAN_POINT('',(-2.775,-0.87,0.66)); +#62798 = DIRECTION('',(-6.E-17,2.2E-16,1.)); +#62799 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62800 = ADVANCED_FACE('',(#62801),#62820,.T.); +#62801 = FACE_BOUND('',#62802,.T.); +#62802 = EDGE_LOOP('',(#62803,#62804,#62812,#62819)); +#62803 = ORIENTED_EDGE('',*,*,#61642,.T.); +#62804 = ORIENTED_EDGE('',*,*,#62805,.T.); +#62805 = EDGE_CURVE('',#61635,#62806,#62808,.T.); +#62806 = VERTEX_POINT('',#62807); +#62807 = CARTESIAN_POINT('',(-2.895,-0.87,0.52)); +#62808 = LINE('',#62809,#62810); +#62809 = CARTESIAN_POINT('',(-2.775,-0.87,0.52)); +#62810 = VECTOR('',#62811,1.); +#62811 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62812 = ORIENTED_EDGE('',*,*,#62813,.F.); +#62813 = EDGE_CURVE('',#62782,#62806,#62814,.T.); +#62814 = CIRCLE('',#62815,0.14); +#62815 = AXIS2_PLACEMENT_3D('',#62816,#62817,#62818); +#62816 = CARTESIAN_POINT('',(-2.895,-1.01,0.52)); +#62817 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62818 = DIRECTION('',(2.16E-15,1.,-1.E-15)); +#62819 = ORIENTED_EDGE('',*,*,#62781,.F.); +#62820 = CYLINDRICAL_SURFACE('',#62821,0.14); +#62821 = AXIS2_PLACEMENT_3D('',#62822,#62823,#62824); +#62822 = CARTESIAN_POINT('',(-2.775,-1.01,0.52)); +#62823 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62824 = DIRECTION('',(-6.E-17,2.2E-16,1.)); +#62825 = ADVANCED_FACE('',(#62826),#62844,.F.); +#62826 = FACE_BOUND('',#62827,.F.); +#62827 = EDGE_LOOP('',(#62828,#62829,#62830,#62838)); +#62828 = ORIENTED_EDGE('',*,*,#61634,.T.); +#62829 = ORIENTED_EDGE('',*,*,#62805,.T.); +#62830 = ORIENTED_EDGE('',*,*,#62831,.T.); +#62831 = EDGE_CURVE('',#62806,#62832,#62834,.T.); +#62832 = VERTEX_POINT('',#62833); +#62833 = CARTESIAN_POINT('',(-2.895,-0.87,0.24)); +#62834 = LINE('',#62835,#62836); +#62835 = CARTESIAN_POINT('',(-2.895,-0.87,0.66)); +#62836 = VECTOR('',#62837,1.); +#62837 = DIRECTION('',(-1.7E-16,5.E-17,-1.)); +#62838 = ORIENTED_EDGE('',*,*,#62839,.T.); +#62839 = EDGE_CURVE('',#62832,#61626,#62840,.T.); +#62840 = LINE('',#62841,#62842); +#62841 = CARTESIAN_POINT('',(-2.895,-0.87,0.24)); +#62842 = VECTOR('',#62843,1.); +#62843 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62844 = PLANE('',#62845); +#62845 = AXIS2_PLACEMENT_3D('',#62846,#62847,#62848); +#62846 = CARTESIAN_POINT('',(-2.835,-0.87,0.38)); +#62847 = DIRECTION('',(-1.09E-15,-1.,-3.E-17)); +#62848 = DIRECTION('',(-1.,1.09E-15,-1.E-15)); +#62849 = ADVANCED_FACE('',(#62850),#62862,.T.); +#62850 = FACE_BOUND('',#62851,.T.); +#62851 = EDGE_LOOP('',(#62852,#62859,#62860,#62861)); +#62852 = ORIENTED_EDGE('',*,*,#62853,.T.); +#62853 = EDGE_CURVE('',#62740,#62832,#62854,.T.); +#62854 = CIRCLE('',#62855,0.14); +#62855 = AXIS2_PLACEMENT_3D('',#62856,#62857,#62858); +#62856 = CARTESIAN_POINT('',(-2.895,-1.01,0.24)); +#62857 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62858 = DIRECTION('',(-2.16E-15,-1.,1.E-15)); +#62859 = ORIENTED_EDGE('',*,*,#62839,.T.); +#62860 = ORIENTED_EDGE('',*,*,#61625,.F.); +#62861 = ORIENTED_EDGE('',*,*,#62747,.F.); +#62862 = CYLINDRICAL_SURFACE('',#62863,0.14); +#62863 = AXIS2_PLACEMENT_3D('',#62864,#62865,#62866); +#62864 = CARTESIAN_POINT('',(-2.895,-1.01,0.24)); +#62865 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62866 = DIRECTION('',(7.5E-16,-2.2E-16,-1.)); +#62867 = ADVANCED_FACE('',(#62868),#62884,.T.); +#62868 = FACE_BOUND('',#62869,.T.); +#62869 = EDGE_LOOP('',(#62870,#62871,#62877,#62878)); +#62870 = ORIENTED_EDGE('',*,*,#62205,.T.); +#62871 = ORIENTED_EDGE('',*,*,#62872,.T.); +#62872 = EDGE_CURVE('',#62198,#61694,#62873,.T.); +#62873 = LINE('',#62874,#62875); +#62874 = CARTESIAN_POINT('',(2.925,0.525,1.32)); +#62875 = VECTOR('',#62876,1.); +#62876 = DIRECTION('',(0.,0.,-1.)); +#62877 = ORIENTED_EDGE('',*,*,#61691,.F.); +#62878 = ORIENTED_EDGE('',*,*,#62879,.F.); +#62879 = EDGE_CURVE('',#62206,#61692,#62880,.T.); +#62880 = LINE('',#62881,#62882); +#62881 = CARTESIAN_POINT('',(2.825,0.525,1.32)); +#62882 = VECTOR('',#62883,1.); +#62883 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#62884 = PLANE('',#62885); +#62885 = AXIS2_PLACEMENT_3D('',#62886,#62887,#62888); +#62886 = CARTESIAN_POINT('',(2.675,0.525,1.32)); +#62887 = DIRECTION('',(1.11E-15,1.,-1.1E-16)); +#62888 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#62889 = ADVANCED_FACE('',(#62890),#62896,.F.); +#62890 = FACE_BOUND('',#62891,.F.); +#62891 = EDGE_LOOP('',(#62892,#62893,#62894,#62895)); +#62892 = ORIENTED_EDGE('',*,*,#61832,.T.); +#62893 = ORIENTED_EDGE('',*,*,#61719,.T.); +#62894 = ORIENTED_EDGE('',*,*,#62879,.F.); +#62895 = ORIENTED_EDGE('',*,*,#62213,.F.); +#62896 = CYLINDRICAL_SURFACE('',#62897,0.15); +#62897 = AXIS2_PLACEMENT_3D('',#62898,#62899,#62900); +#62898 = CARTESIAN_POINT('',(2.825,0.675,1.32)); +#62899 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#62900 = DIRECTION('',(-1.,2.2E-16,-7.2E-16)); +#62901 = ADVANCED_FACE('',(#62902),#62908,.T.); +#62902 = FACE_BOUND('',#62903,.F.); +#62903 = EDGE_LOOP('',(#62904,#62905,#62906,#62907)); +#62904 = ORIENTED_EDGE('',*,*,#62197,.T.); +#62905 = ORIENTED_EDGE('',*,*,#62872,.T.); +#62906 = ORIENTED_EDGE('',*,*,#61701,.T.); +#62907 = ORIENTED_EDGE('',*,*,#62607,.T.); +#62908 = PLANE('',#62909); +#62909 = AXIS2_PLACEMENT_3D('',#62910,#62911,#62912); +#62910 = CARTESIAN_POINT('',(2.925,-1.54E-15,1.26)); +#62911 = DIRECTION('',(1.,-4.2E-16,0.)); +#62912 = DIRECTION('',(4.2E-16,1.,0.)); +#62913 = ADVANCED_FACE('',(#62914),#62930,.T.); +#62914 = FACE_BOUND('',#62915,.F.); +#62915 = EDGE_LOOP('',(#62916,#62922,#62923,#62929)); +#62916 = ORIENTED_EDGE('',*,*,#62917,.F.); +#62917 = EDGE_CURVE('',#62234,#61751,#62918,.T.); +#62918 = LINE('',#62919,#62920); +#62919 = CARTESIAN_POINT('',(-2.825,0.525,1.32)); +#62920 = VECTOR('',#62921,1.); +#62921 = DIRECTION('',(-6.E-17,1.1E-16,-1.)); +#62922 = ORIENTED_EDGE('',*,*,#62266,.T.); +#62923 = ORIENTED_EDGE('',*,*,#62924,.T.); +#62924 = EDGE_CURVE('',#62259,#61759,#62925,.T.); +#62925 = LINE('',#62926,#62927); +#62926 = CARTESIAN_POINT('',(-2.925,0.525,1.32)); +#62927 = VECTOR('',#62928,1.); +#62928 = DIRECTION('',(-5.6E-16,4.4E-16,-1.)); +#62929 = ORIENTED_EDGE('',*,*,#61758,.F.); +#62930 = PLANE('',#62931); +#62931 = AXIS2_PLACEMENT_3D('',#62932,#62933,#62934); +#62932 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#62933 = DIRECTION('',(0.,1.,-3.3E-16)); +#62934 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#62935 = ADVANCED_FACE('',(#62936),#62942,.T.); +#62936 = FACE_BOUND('',#62937,.T.); +#62937 = EDGE_LOOP('',(#62938,#62939,#62940,#62941)); +#62938 = ORIENTED_EDGE('',*,*,#62258,.T.); +#62939 = ORIENTED_EDGE('',*,*,#62924,.T.); +#62940 = ORIENTED_EDGE('',*,*,#61766,.T.); +#62941 = ORIENTED_EDGE('',*,*,#62134,.T.); +#62942 = PLANE('',#62943); +#62943 = AXIS2_PLACEMENT_3D('',#62944,#62945,#62946); +#62944 = CARTESIAN_POINT('',(-2.925,6.1E-16,1.26)); +#62945 = DIRECTION('',(-1.,4.7E-16,-4.4E-16)); +#62946 = DIRECTION('',(-4.7E-16,-1.,4.4E-16)); +#62947 = ADVANCED_FACE('',(#62948),#63043,.F.); +#62948 = FACE_BOUND('',#62949,.F.); +#62949 = EDGE_LOOP('',(#62950,#62960,#62966,#62967,#62968,#62969,#62977, + #62985,#62994,#63002,#63011,#63019,#63028,#63036)); +#62950 = ORIENTED_EDGE('',*,*,#62951,.F.); +#62951 = EDGE_CURVE('',#62952,#62954,#62956,.T.); +#62952 = VERTEX_POINT('',#62953); +#62953 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#62954 = VERTEX_POINT('',#62955); +#62955 = CARTESIAN_POINT('',(-0.85,1.73,0.1)); +#62956 = LINE('',#62957,#62958); +#62957 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#62958 = VECTOR('',#62959,1.); +#62959 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#62960 = ORIENTED_EDGE('',*,*,#62961,.F.); +#62961 = EDGE_CURVE('',#61891,#62952,#62962,.T.); +#62962 = LINE('',#62963,#62964); +#62963 = CARTESIAN_POINT('',(-2.675,1.73,1.2)); +#62964 = VECTOR('',#62965,1.); +#62965 = DIRECTION('',(0.,0.,-1.)); +#62966 = ORIENTED_EDGE('',*,*,#61890,.F.); +#62967 = ORIENTED_EDGE('',*,*,#61865,.T.); +#62968 = ORIENTED_EDGE('',*,*,#61800,.T.); +#62969 = ORIENTED_EDGE('',*,*,#62970,.T.); +#62970 = EDGE_CURVE('',#61801,#62971,#62973,.T.); +#62971 = VERTEX_POINT('',#62972); +#62972 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#62973 = LINE('',#62974,#62975); +#62974 = CARTESIAN_POINT('',(2.675,1.73,1.2)); +#62975 = VECTOR('',#62976,1.); +#62976 = DIRECTION('',(0.,0.,-1.)); +#62977 = ORIENTED_EDGE('',*,*,#62978,.F.); +#62978 = EDGE_CURVE('',#62979,#62971,#62981,.T.); +#62979 = VERTEX_POINT('',#62980); +#62980 = CARTESIAN_POINT('',(0.85,1.73,0.1)); +#62981 = LINE('',#62982,#62983); +#62982 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#62983 = VECTOR('',#62984,1.); +#62984 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#62985 = ORIENTED_EDGE('',*,*,#62986,.T.); +#62986 = EDGE_CURVE('',#62979,#62987,#62989,.T.); +#62987 = VERTEX_POINT('',#62988); +#62988 = CARTESIAN_POINT('',(0.7,1.73,0.25)); +#62989 = CIRCLE('',#62990,0.15); +#62990 = AXIS2_PLACEMENT_3D('',#62991,#62992,#62993); +#62991 = CARTESIAN_POINT('',(0.85,1.73,0.25)); +#62992 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#62993 = DIRECTION('',(0.,-1.17E-15,-1.)); +#62994 = ORIENTED_EDGE('',*,*,#62995,.T.); +#62995 = EDGE_CURVE('',#62987,#62996,#62998,.T.); +#62996 = VERTEX_POINT('',#62997); +#62997 = CARTESIAN_POINT('',(0.7,1.73,0.45)); +#62998 = LINE('',#62999,#63000); +#62999 = CARTESIAN_POINT('',(0.7,1.73,0.65)); +#63000 = VECTOR('',#63001,1.); +#63001 = DIRECTION('',(-2.2E-16,1.22E-15,1.)); +#63002 = ORIENTED_EDGE('',*,*,#63003,.F.); +#63003 = EDGE_CURVE('',#63004,#62996,#63006,.T.); +#63004 = VERTEX_POINT('',#63005); +#63005 = CARTESIAN_POINT('',(0.55,1.73,0.6)); +#63006 = CIRCLE('',#63007,0.15); +#63007 = AXIS2_PLACEMENT_3D('',#63008,#63009,#63010); +#63008 = CARTESIAN_POINT('',(0.55,1.73,0.45)); +#63009 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63010 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63011 = ORIENTED_EDGE('',*,*,#63012,.F.); +#63012 = EDGE_CURVE('',#63013,#63004,#63015,.T.); +#63013 = VERTEX_POINT('',#63014); +#63014 = CARTESIAN_POINT('',(-0.55,1.73,0.6)); +#63015 = LINE('',#63016,#63017); +#63016 = CARTESIAN_POINT('',(-1.6125,1.73,0.6)); +#63017 = VECTOR('',#63018,1.); +#63018 = DIRECTION('',(1.,-4.4E-16,0.)); +#63019 = ORIENTED_EDGE('',*,*,#63020,.F.); +#63020 = EDGE_CURVE('',#63021,#63013,#63023,.T.); +#63021 = VERTEX_POINT('',#63022); +#63022 = CARTESIAN_POINT('',(-0.7,1.73,0.45)); +#63023 = CIRCLE('',#63024,0.15); +#63024 = AXIS2_PLACEMENT_3D('',#63025,#63026,#63027); +#63025 = CARTESIAN_POINT('',(-0.55,1.73,0.45)); +#63026 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63027 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63028 = ORIENTED_EDGE('',*,*,#63029,.T.); +#63029 = EDGE_CURVE('',#63021,#63030,#63032,.T.); +#63030 = VERTEX_POINT('',#63031); +#63031 = CARTESIAN_POINT('',(-0.7,1.73,0.25)); +#63032 = LINE('',#63033,#63034); +#63033 = CARTESIAN_POINT('',(-0.7,1.73,0.825)); +#63034 = VECTOR('',#63035,1.); +#63035 = DIRECTION('',(2.2E-16,-1.22E-15,-1.)); +#63036 = ORIENTED_EDGE('',*,*,#63037,.F.); +#63037 = EDGE_CURVE('',#62954,#63030,#63038,.T.); +#63038 = CIRCLE('',#63039,0.15); +#63039 = AXIS2_PLACEMENT_3D('',#63040,#63041,#63042); +#63040 = CARTESIAN_POINT('',(-0.85,1.73,0.25)); +#63041 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63042 = DIRECTION('',(0.,-1.17E-15,-1.)); +#63043 = PLANE('',#63044); +#63044 = AXIS2_PLACEMENT_3D('',#63045,#63046,#63047); +#63045 = CARTESIAN_POINT('',(-2.675,1.73,1.2)); +#63046 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#63047 = DIRECTION('',(4.4E-16,-2.2E-16,-1.)); +#63048 = ADVANCED_FACE('',(#63049),#63074,.T.); +#63049 = FACE_BOUND('',#63050,.T.); +#63050 = EDGE_LOOP('',(#63051,#63059,#63067,#63073)); +#63051 = ORIENTED_EDGE('',*,*,#63052,.F.); +#63052 = EDGE_CURVE('',#63053,#61801,#63055,.T.); +#63053 = VERTEX_POINT('',#63054); +#63054 = CARTESIAN_POINT('',(2.725,1.73,0.66)); +#63055 = LINE('',#63056,#63057); +#63056 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#63057 = VECTOR('',#63058,1.); +#63058 = DIRECTION('',(-1.,4.4E-16,-3.9E-16)); +#63059 = ORIENTED_EDGE('',*,*,#63060,.T.); +#63060 = EDGE_CURVE('',#63053,#63061,#63063,.T.); +#63061 = VERTEX_POINT('',#63062); +#63062 = CARTESIAN_POINT('',(2.725,1.85,0.66)); +#63063 = LINE('',#63064,#63065); +#63064 = CARTESIAN_POINT('',(2.725,1.73,0.66)); +#63065 = VECTOR('',#63066,1.); +#63066 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#63067 = ORIENTED_EDGE('',*,*,#63068,.T.); +#63068 = EDGE_CURVE('',#63061,#61809,#63069,.T.); +#63069 = LINE('',#63070,#63071); +#63070 = CARTESIAN_POINT('',(2.675,1.85,0.66)); +#63071 = VECTOR('',#63072,1.); +#63072 = DIRECTION('',(-1.,4.4E-16,-3.9E-16)); +#63073 = ORIENTED_EDGE('',*,*,#61808,.F.); +#63074 = PLANE('',#63075); +#63075 = AXIS2_PLACEMENT_3D('',#63076,#63077,#63078); +#63076 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#63077 = DIRECTION('',(-3.9E-16,2.2E-16,1.)); +#63078 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#63079 = ADVANCED_FACE('',(#63080),#63175,.F.); +#63080 = FACE_BOUND('',#63081,.F.); +#63081 = EDGE_LOOP('',(#63082,#63092,#63101,#63109,#63118,#63126,#63135, + #63143,#63152,#63160,#63166,#63167,#63168,#63169)); +#63082 = ORIENTED_EDGE('',*,*,#63083,.T.); +#63083 = EDGE_CURVE('',#63084,#63086,#63088,.T.); +#63084 = VERTEX_POINT('',#63085); +#63085 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63086 = VERTEX_POINT('',#63087); +#63087 = CARTESIAN_POINT('',(-0.85,1.85,0.1)); +#63088 = LINE('',#63089,#63090); +#63089 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63090 = VECTOR('',#63091,1.); +#63091 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#63092 = ORIENTED_EDGE('',*,*,#63093,.T.); +#63093 = EDGE_CURVE('',#63086,#63094,#63096,.T.); +#63094 = VERTEX_POINT('',#63095); +#63095 = CARTESIAN_POINT('',(-0.7,1.85,0.25)); +#63096 = CIRCLE('',#63097,0.15); +#63097 = AXIS2_PLACEMENT_3D('',#63098,#63099,#63100); +#63098 = CARTESIAN_POINT('',(-0.85,1.85,0.25)); +#63099 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63100 = DIRECTION('',(0.,-1.17E-15,-1.)); +#63101 = ORIENTED_EDGE('',*,*,#63102,.F.); +#63102 = EDGE_CURVE('',#63103,#63094,#63105,.T.); +#63103 = VERTEX_POINT('',#63104); +#63104 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63105 = LINE('',#63106,#63107); +#63106 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63107 = VECTOR('',#63108,1.); +#63108 = DIRECTION('',(-1.E-30,-1.E-15,-1.)); +#63109 = ORIENTED_EDGE('',*,*,#63110,.T.); +#63110 = EDGE_CURVE('',#63103,#63111,#63113,.T.); +#63111 = VERTEX_POINT('',#63112); +#63112 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63113 = CIRCLE('',#63114,0.15); +#63114 = AXIS2_PLACEMENT_3D('',#63115,#63116,#63117); +#63115 = CARTESIAN_POINT('',(-0.55,1.85,0.45)); +#63116 = DIRECTION('',(-1.E-45,1.,-1.E-15)); +#63117 = DIRECTION('',(1.E-30,1.E-15,1.)); +#63118 = ORIENTED_EDGE('',*,*,#63119,.T.); +#63119 = EDGE_CURVE('',#63111,#63120,#63122,.T.); +#63120 = VERTEX_POINT('',#63121); +#63121 = CARTESIAN_POINT('',(0.55,1.85,0.6)); +#63122 = LINE('',#63123,#63124); +#63123 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63124 = VECTOR('',#63125,1.); +#63125 = DIRECTION('',(1.,0.,0.)); +#63126 = ORIENTED_EDGE('',*,*,#63127,.T.); +#63127 = EDGE_CURVE('',#63120,#63128,#63130,.T.); +#63128 = VERTEX_POINT('',#63129); +#63129 = CARTESIAN_POINT('',(0.7,1.85,0.45)); +#63130 = CIRCLE('',#63131,0.15); +#63131 = AXIS2_PLACEMENT_3D('',#63132,#63133,#63134); +#63132 = CARTESIAN_POINT('',(0.55,1.85,0.45)); +#63133 = DIRECTION('',(-1.E-45,1.,-1.E-15)); +#63134 = DIRECTION('',(1.E-30,1.E-15,1.)); +#63135 = ORIENTED_EDGE('',*,*,#63136,.F.); +#63136 = EDGE_CURVE('',#63137,#63128,#63139,.T.); +#63137 = VERTEX_POINT('',#63138); +#63138 = CARTESIAN_POINT('',(0.7,1.85,0.25)); +#63139 = LINE('',#63140,#63141); +#63140 = CARTESIAN_POINT('',(0.7,1.85,0.1)); +#63141 = VECTOR('',#63142,1.); +#63142 = DIRECTION('',(1.E-30,1.E-15,1.)); +#63143 = ORIENTED_EDGE('',*,*,#63144,.F.); +#63144 = EDGE_CURVE('',#63145,#63137,#63147,.T.); +#63145 = VERTEX_POINT('',#63146); +#63146 = CARTESIAN_POINT('',(0.85,1.85,0.1)); +#63147 = CIRCLE('',#63148,0.15); +#63148 = AXIS2_PLACEMENT_3D('',#63149,#63150,#63151); +#63149 = CARTESIAN_POINT('',(0.85,1.85,0.25)); +#63150 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#63151 = DIRECTION('',(0.,-1.17E-15,-1.)); +#63152 = ORIENTED_EDGE('',*,*,#63153,.T.); +#63153 = EDGE_CURVE('',#63145,#63154,#63156,.T.); +#63154 = VERTEX_POINT('',#63155); +#63155 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63156 = LINE('',#63157,#63158); +#63157 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63158 = VECTOR('',#63159,1.); +#63159 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#63160 = ORIENTED_EDGE('',*,*,#63161,.T.); +#63161 = EDGE_CURVE('',#63154,#61809,#63162,.T.); +#63162 = LINE('',#63163,#63164); +#63163 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63164 = VECTOR('',#63165,1.); +#63165 = DIRECTION('',(0.,0.,1.)); +#63166 = ORIENTED_EDGE('',*,*,#61816,.T.); +#63167 = ORIENTED_EDGE('',*,*,#62174,.F.); +#63168 = ORIENTED_EDGE('',*,*,#61906,.F.); +#63169 = ORIENTED_EDGE('',*,*,#63170,.F.); +#63170 = EDGE_CURVE('',#63084,#61899,#63171,.T.); +#63171 = LINE('',#63172,#63173); +#63172 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63173 = VECTOR('',#63174,1.); +#63174 = DIRECTION('',(0.,0.,1.)); +#63175 = PLANE('',#63176); +#63176 = AXIS2_PLACEMENT_3D('',#63177,#63178,#63179); +#63177 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63178 = DIRECTION('',(-4.4E-16,-1.,2.2E-16)); +#63179 = DIRECTION('',(-4.4E-16,2.2E-16,1.)); +#63180 = ADVANCED_FACE('',(#63181),#63187,.F.); +#63181 = FACE_BOUND('',#63182,.F.); +#63182 = EDGE_LOOP('',(#63183,#63184,#63185,#63186)); +#63183 = ORIENTED_EDGE('',*,*,#62241,.T.); +#63184 = ORIENTED_EDGE('',*,*,#62917,.T.); +#63185 = ORIENTED_EDGE('',*,*,#61846,.F.); +#63186 = ORIENTED_EDGE('',*,*,#61922,.F.); +#63187 = CYLINDRICAL_SURFACE('',#63188,0.15); +#63188 = AXIS2_PLACEMENT_3D('',#63189,#63190,#63191); +#63189 = CARTESIAN_POINT('',(-2.825,0.675,1.32)); +#63190 = DIRECTION('',(-6.E-17,1.1E-16,-1.)); +#63191 = DIRECTION('',(1.,-8.9E-16,-6.E-17)); +#63192 = ADVANCED_FACE('',(#63193),#63218,.T.); +#63193 = FACE_BOUND('',#63194,.F.); +#63194 = EDGE_LOOP('',(#63195,#63203,#63211,#63217)); +#63195 = ORIENTED_EDGE('',*,*,#63196,.F.); +#63196 = EDGE_CURVE('',#63197,#61891,#63199,.T.); +#63197 = VERTEX_POINT('',#63198); +#63198 = CARTESIAN_POINT('',(-2.725,1.73,0.66)); +#63199 = LINE('',#63200,#63201); +#63200 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#63201 = VECTOR('',#63202,1.); +#63202 = DIRECTION('',(1.,-6.7E-16,2.8E-16)); +#63203 = ORIENTED_EDGE('',*,*,#63204,.T.); +#63204 = EDGE_CURVE('',#63197,#63205,#63207,.T.); +#63205 = VERTEX_POINT('',#63206); +#63206 = CARTESIAN_POINT('',(-2.725,1.85,0.66)); +#63207 = LINE('',#63208,#63209); +#63208 = CARTESIAN_POINT('',(-2.725,1.73,0.66)); +#63209 = VECTOR('',#63210,1.); +#63210 = DIRECTION('',(6.7E-16,1.,-4.4E-16)); +#63211 = ORIENTED_EDGE('',*,*,#63212,.T.); +#63212 = EDGE_CURVE('',#63205,#61899,#63213,.T.); +#63213 = LINE('',#63214,#63215); +#63214 = CARTESIAN_POINT('',(-2.675,1.85,0.66)); +#63215 = VECTOR('',#63216,1.); +#63216 = DIRECTION('',(1.,-6.7E-16,2.8E-16)); +#63217 = ORIENTED_EDGE('',*,*,#61898,.F.); +#63218 = PLANE('',#63219); +#63219 = AXIS2_PLACEMENT_3D('',#63220,#63221,#63222); +#63220 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#63221 = DIRECTION('',(-2.8E-16,0.,1.)); +#63222 = DIRECTION('',(-6.7E-16,-1.,-1.876E-31)); +#63223 = ADVANCED_FACE('',(#63224,#63234),#63276,.T.); +#63224 = FACE_BOUND('',#63225,.T.); +#63225 = EDGE_LOOP('',(#63226,#63227,#63228,#63229,#63230,#63231,#63232, + #63233)); +#63226 = ORIENTED_EDGE('',*,*,#61936,.T.); +#63227 = ORIENTED_EDGE('',*,*,#61992,.T.); +#63228 = ORIENTED_EDGE('',*,*,#62041,.T.); +#63229 = ORIENTED_EDGE('',*,*,#62100,.F.); +#63230 = ORIENTED_EDGE('',*,*,#62115,.T.); +#63231 = ORIENTED_EDGE('',*,*,#62075,.F.); +#63232 = ORIENTED_EDGE('',*,*,#62017,.T.); +#63233 = ORIENTED_EDGE('',*,*,#61977,.F.); +#63234 = FACE_BOUND('',#63235,.T.); +#63235 = EDGE_LOOP('',(#63236,#63248,#63258,#63268)); +#63236 = ORIENTED_EDGE('',*,*,#63237,.F.); +#63237 = EDGE_CURVE('',#63238,#63240,#63242,.T.); +#63238 = VERTEX_POINT('',#63239); +#63239 = CARTESIAN_POINT('',(1.837322093506,-0.942322063626,1.9)); +#63240 = VERTEX_POINT('',#63241); +#63241 = CARTESIAN_POINT('',(-1.837322093506,-0.942322063626,1.9)); +#63242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63243,#63244,#63245,#63246, + #63247),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#63243 = CARTESIAN_POINT('',(2.284805319193,-0.942322063626,1.9)); +#63244 = CARTESIAN_POINT('',(2.20941310814,-0.942322063626,1.9)); +#63245 = CARTESIAN_POINT('',(-1.33E-15,-0.942322063626,1.9)); +#63246 = CARTESIAN_POINT('',(-2.20941310814,-0.942322063626,1.9)); +#63247 = CARTESIAN_POINT('',(-2.284805319193,-0.942322063626,1.9)); +#63248 = ORIENTED_EDGE('',*,*,#63249,.F.); +#63249 = EDGE_CURVE('',#63250,#63238,#63252,.T.); +#63250 = VERTEX_POINT('',#63251); +#63251 = CARTESIAN_POINT('',(1.837322093506,0.942322063626,1.9)); +#63252 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63253,#63254,#63255,#63256, + #63257),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#63253 = CARTESIAN_POINT('',(1.837322063626,1.324076519193,1.9)); +#63254 = CARTESIAN_POINT('',(1.837322063626,1.28154870814,1.9)); +#63255 = CARTESIAN_POINT('',(1.837322063626,8.9E-16,1.9)); +#63256 = CARTESIAN_POINT('',(1.837322063626,-1.28154870814,1.9)); +#63257 = CARTESIAN_POINT('',(1.837322063626,-1.324076519193,1.9)); +#63258 = ORIENTED_EDGE('',*,*,#63259,.F.); +#63259 = EDGE_CURVE('',#63260,#63250,#63262,.T.); +#63260 = VERTEX_POINT('',#63261); +#63261 = CARTESIAN_POINT('',(-1.837322063626,0.9423224875,1.9)); +#63262 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63263,#63264,#63265,#63266, + #63267),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#63263 = CARTESIAN_POINT('',(-2.284805319193,0.942322063626,1.9)); +#63264 = CARTESIAN_POINT('',(-2.20941310814,0.942322063626,1.9)); +#63265 = CARTESIAN_POINT('',(0.,0.942322063626,1.9)); +#63266 = CARTESIAN_POINT('',(2.20941310814,0.942322063626,1.9)); +#63267 = CARTESIAN_POINT('',(2.284805319193,0.942322063626,1.9)); +#63268 = ORIENTED_EDGE('',*,*,#63269,.F.); +#63269 = EDGE_CURVE('',#63240,#63260,#63270,.T.); +#63270 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63271,#63272,#63273,#63274, + #63275),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#63271 = CARTESIAN_POINT('',(-1.837322063626,-1.324076519193,1.9)); +#63272 = CARTESIAN_POINT('',(-1.837322063626,-1.28154870814,1.9)); +#63273 = CARTESIAN_POINT('',(-1.837322063626,1.33E-15,1.9)); +#63274 = CARTESIAN_POINT('',(-1.837322063626,1.28154870814,1.9)); +#63275 = CARTESIAN_POINT('',(-1.837322063626,1.324076519193,1.9)); +#63276 = PLANE('',#63277); +#63277 = AXIS2_PLACEMENT_3D('',#63278,#63279,#63280); +#63278 = CARTESIAN_POINT('',(2.053164789016,1.158164789016,1.9)); +#63279 = DIRECTION('',(-2.7E-16,5.8E-16,1.)); +#63280 = DIRECTION('',(-0.870984046787,-0.491311296677, + 4.979485944017E-17)); +#63281 = ADVANCED_FACE('',(#63282),#63300,.T.); +#63282 = FACE_BOUND('',#63283,.T.); +#63283 = EDGE_LOOP('',(#63284,#63291,#63292,#63299)); +#63284 = ORIENTED_EDGE('',*,*,#63285,.F.); +#63285 = EDGE_CURVE('',#63250,#62297,#63286,.T.); +#63286 = CIRCLE('',#63287,0.32); +#63287 = AXIS2_PLACEMENT_3D('',#63288,#63289,#63290); +#63288 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#63289 = DIRECTION('',(-1.08E-15,1.,-3.47E-15)); +#63290 = DIRECTION('',(1.,1.079999675991E-15,-9.33744429E-08)); +#63291 = ORIENTED_EDGE('',*,*,#63249,.T.); +#63292 = ORIENTED_EDGE('',*,*,#63293,.T.); +#63293 = EDGE_CURVE('',#63238,#62284,#63294,.T.); +#63294 = CIRCLE('',#63295,0.32); +#63295 = AXIS2_PLACEMENT_3D('',#63296,#63297,#63298); +#63296 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#63297 = DIRECTION('',(3.7E-16,1.,3.12E-15)); +#63298 = DIRECTION('',(1.,-3.699997086717E-16,-9.337443943E-08)); +#63299 = ORIENTED_EDGE('',*,*,#62296,.F.); +#63300 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63301,#63302,#63303,#63304,#63305) + ,(#63306,#63307,#63308,#63309,#63310) + ,(#63311,#63312,#63313,#63314,#63315 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,2.478041794175),(-0.165911730177,-8.08561080718E-02, + 2.397185686103,2.482241308208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63301 = CARTESIAN_POINT('',(2.134020897087,1.324076519193, + 1.699874109893)); +#63302 = CARTESIAN_POINT('',(2.134020897087,1.28154870814,1.699874109893 + )); +#63303 = CARTESIAN_POINT('',(2.134020897087,8.9E-16,1.699874109893)); +#63304 = CARTESIAN_POINT('',(2.134020897087,-1.28154870814, + 1.699874109893)); +#63305 = CARTESIAN_POINT('',(2.134020897087,-1.324076519193, + 1.699874109893)); +#63306 = CARTESIAN_POINT('',(2.053164789016,1.324076519193,1.9)); +#63307 = CARTESIAN_POINT('',(2.053164789016,1.28154870814,1.9)); +#63308 = CARTESIAN_POINT('',(2.053164789016,1.07E-15,1.9)); +#63309 = CARTESIAN_POINT('',(2.053164789016,-1.28154870814,1.9)); +#63310 = CARTESIAN_POINT('',(2.053164789016,-1.324076519193,1.9)); +#63311 = CARTESIAN_POINT('',(1.837322063626,1.324076519193,1.9)); +#63312 = CARTESIAN_POINT('',(1.837322063626,1.28154870814,1.9)); +#63313 = CARTESIAN_POINT('',(1.837322063626,8.9E-16,1.9)); +#63314 = CARTESIAN_POINT('',(1.837322063626,-1.28154870814,1.9)); +#63315 = CARTESIAN_POINT('',(1.837322063626,-1.324076519193,1.9)); +#63316 = ADVANCED_FACE('',(#63317),#63328,.T.); +#63317 = FACE_BOUND('',#63318,.T.); +#63318 = EDGE_LOOP('',(#63319,#63326,#63327)); +#63319 = ORIENTED_EDGE('',*,*,#63320,.F.); +#63320 = EDGE_CURVE('',#63250,#62327,#63321,.T.); +#63321 = CIRCLE('',#63322,0.32); +#63322 = AXIS2_PLACEMENT_3D('',#63323,#63324,#63325); +#63323 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#63324 = DIRECTION('',(-1.,-3.772572001E-08,9.33744429E-08)); +#63325 = DIRECTION('',(-3.772572001E-08,1.,5.000000000002E-17)); +#63326 = ORIENTED_EDGE('',*,*,#63285,.T.); +#63327 = ORIENTED_EDGE('',*,*,#62339,.F.); +#63328 = SPHERICAL_SURFACE('',#63329,0.32); +#63329 = AXIS2_PLACEMENT_3D('',#63330,#63331,#63332); +#63330 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#63331 = DIRECTION('',(-9.33744429E-08,-3.47E-15,-1.)); +#63332 = DIRECTION('',(-3.772572001E-08,1.,5.261808893513E-17)); +#63333 = ADVANCED_FACE('',(#63334),#63345,.T.); +#63334 = FACE_BOUND('',#63335,.T.); +#63335 = EDGE_LOOP('',(#63336,#63337,#63338)); +#63336 = ORIENTED_EDGE('',*,*,#62389,.T.); +#63337 = ORIENTED_EDGE('',*,*,#63293,.F.); +#63338 = ORIENTED_EDGE('',*,*,#63339,.T.); +#63339 = EDGE_CURVE('',#63238,#62377,#63340,.T.); +#63340 = CIRCLE('',#63341,0.32); +#63341 = AXIS2_PLACEMENT_3D('',#63342,#63343,#63344); +#63342 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#63343 = DIRECTION('',(1.,-3.772572086E-08,-9.337443943E-08)); +#63344 = DIRECTION('',(-3.772572086E-08,-1.,4.E-16)); +#63345 = SPHERICAL_SURFACE('',#63346,0.32); +#63346 = AXIS2_PLACEMENT_3D('',#63347,#63348,#63349); +#63347 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#63348 = DIRECTION('',(-9.337443943E-08,3.12E-15,-1.)); +#63349 = DIRECTION('',(-3.772572086E-08,-1.,4.026180373952E-16)); +#63350 = ADVANCED_FACE('',(#63351),#63363,.T.); +#63351 = FACE_BOUND('',#63352,.T.); +#63352 = EDGE_LOOP('',(#63353,#63360,#63361,#63362)); +#63353 = ORIENTED_EDGE('',*,*,#63354,.F.); +#63354 = EDGE_CURVE('',#63260,#62428,#63355,.T.); +#63355 = CIRCLE('',#63356,0.32); +#63356 = AXIS2_PLACEMENT_3D('',#63357,#63358,#63359); +#63357 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#63358 = DIRECTION('',(-1.,-2.3998E-13,-3.5388E-13)); +#63359 = DIRECTION('',(-2.39979531248E-13,0.999999999999, + -1.32460672916E-06)); +#63360 = ORIENTED_EDGE('',*,*,#63259,.T.); +#63361 = ORIENTED_EDGE('',*,*,#63320,.T.); +#63362 = ORIENTED_EDGE('',*,*,#62427,.F.); +#63363 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63364,#63365,#63366,#63367,#63368) + ,(#63369,#63370,#63371,#63372,#63373) + ,(#63374,#63375,#63376,#63377,#63378 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,4.268041794175),(-0.231640530177,-8.08561080718E-02, + 4.187185686103,4.337970108208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63364 = CARTESIAN_POINT('',(-2.284805319193,1.239020897087, + 1.699874109893)); +#63365 = CARTESIAN_POINT('',(-2.20941310814,1.239020897087, + 1.699874109893)); +#63366 = CARTESIAN_POINT('',(0.,1.239020897087,1.699874109893)); +#63367 = CARTESIAN_POINT('',(2.20941310814,1.239020897087,1.699874109893 + )); +#63368 = CARTESIAN_POINT('',(2.284805319193,1.239020897087, + 1.699874109893)); +#63369 = CARTESIAN_POINT('',(-2.284805319193,1.158164789016,1.9)); +#63370 = CARTESIAN_POINT('',(-2.20941310814,1.158164789016,1.9)); +#63371 = CARTESIAN_POINT('',(4.E-16,1.158164789016,1.9)); +#63372 = CARTESIAN_POINT('',(2.20941310814,1.158164789016,1.9)); +#63373 = CARTESIAN_POINT('',(2.284805319193,1.158164789016,1.9)); +#63374 = CARTESIAN_POINT('',(-2.284805319193,0.942322063626,1.9)); +#63375 = CARTESIAN_POINT('',(-2.20941310814,0.942322063626,1.9)); +#63376 = CARTESIAN_POINT('',(0.,0.942322063626,1.9)); +#63377 = CARTESIAN_POINT('',(2.20941310814,0.942322063626,1.9)); +#63378 = CARTESIAN_POINT('',(2.284805319193,0.942322063626,1.9)); +#63379 = ADVANCED_FACE('',(#63380),#63392,.T.); +#63380 = FACE_BOUND('',#63381,.T.); +#63381 = EDGE_LOOP('',(#63382,#63383,#63384,#63391)); +#63382 = ORIENTED_EDGE('',*,*,#63339,.F.); +#63383 = ORIENTED_EDGE('',*,*,#63237,.T.); +#63384 = ORIENTED_EDGE('',*,*,#63385,.T.); +#63385 = EDGE_CURVE('',#63240,#62458,#63386,.T.); +#63386 = CIRCLE('',#63387,0.32); +#63387 = AXIS2_PLACEMENT_3D('',#63388,#63389,#63390); +#63388 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#63389 = DIRECTION('',(1.,3.772571871E-08,9.337443596E-08)); +#63390 = DIRECTION('',(3.772571871E-08,-1.,5.000000000002E-17)); +#63391 = ORIENTED_EDGE('',*,*,#62470,.F.); +#63392 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63393,#63394,#63395,#63396,#63397) + ,(#63398,#63399,#63400,#63401,#63402) + ,(#63403,#63404,#63405,#63406,#63407 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,4.268041794175),(-0.231640530177,-8.08561080718E-02, + 4.187185686103,4.337970108208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63393 = CARTESIAN_POINT('',(2.284805319193,-1.239020897087, + 1.699874109893)); +#63394 = CARTESIAN_POINT('',(2.20941310814,-1.239020897087, + 1.699874109893)); +#63395 = CARTESIAN_POINT('',(-1.33E-15,-1.239020897087,1.699874109893)); +#63396 = CARTESIAN_POINT('',(-2.20941310814,-1.239020897087, + 1.699874109893)); +#63397 = CARTESIAN_POINT('',(-2.284805319193,-1.239020897087, + 1.699874109893)); +#63398 = CARTESIAN_POINT('',(2.284805319193,-1.158164789016,1.9)); +#63399 = CARTESIAN_POINT('',(2.20941310814,-1.158164789016,1.9)); +#63400 = CARTESIAN_POINT('',(-1.74E-15,-1.158164789016,1.9)); +#63401 = CARTESIAN_POINT('',(-2.20941310814,-1.158164789016,1.9)); +#63402 = CARTESIAN_POINT('',(-2.284805319193,-1.158164789016,1.9)); +#63403 = CARTESIAN_POINT('',(2.284805319193,-0.942322063626,1.9)); +#63404 = CARTESIAN_POINT('',(2.20941310814,-0.942322063626,1.9)); +#63405 = CARTESIAN_POINT('',(-1.33E-15,-0.942322063626,1.9)); +#63406 = CARTESIAN_POINT('',(-2.20941310814,-0.942322063626,1.9)); +#63407 = CARTESIAN_POINT('',(-2.284805319193,-0.942322063626,1.9)); +#63408 = ADVANCED_FACE('',(#63409),#63420,.T.); +#63409 = FACE_BOUND('',#63410,.T.); +#63410 = EDGE_LOOP('',(#63411,#63418,#63419)); +#63411 = ORIENTED_EDGE('',*,*,#63412,.F.); +#63412 = EDGE_CURVE('',#63260,#62490,#63413,.T.); +#63413 = CIRCLE('',#63414,0.32); +#63414 = AXIS2_PLACEMENT_3D('',#63415,#63416,#63417); +#63415 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#63416 = DIRECTION('',(5.3517547582E-07,-0.999999999999, + 1.32460672916E-06)); +#63417 = DIRECTION('',(-1.,-5.3517547582E-07,3.5501E-13)); +#63418 = ORIENTED_EDGE('',*,*,#63354,.T.); +#63419 = ORIENTED_EDGE('',*,*,#62489,.F.); +#63420 = SPHERICAL_SURFACE('',#63421,0.32); +#63421 = AXIS2_PLACEMENT_3D('',#63422,#63423,#63424); +#63422 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#63423 = DIRECTION('',(3.5388E-13,-1.32460672916E-06,-0.999999999999)); +#63424 = DIRECTION('',(-1.,-5.351754758199E-07,3.550170365529E-13)); +#63425 = ADVANCED_FACE('',(#63426),#63437,.T.); +#63426 = FACE_BOUND('',#63427,.T.); +#63427 = EDGE_LOOP('',(#63428,#63429,#63436)); +#63428 = ORIENTED_EDGE('',*,*,#63385,.F.); +#63429 = ORIENTED_EDGE('',*,*,#63430,.T.); +#63430 = EDGE_CURVE('',#63240,#62539,#63431,.T.); +#63431 = CIRCLE('',#63432,0.32); +#63432 = AXIS2_PLACEMENT_3D('',#63433,#63434,#63435); +#63433 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#63434 = DIRECTION('',(8.8E-16,-1.,-3.47E-15)); +#63435 = DIRECTION('',(-1.,-8.799996759907E-16,-9.337443596E-08)); +#63436 = ORIENTED_EDGE('',*,*,#62551,.F.); +#63437 = SPHERICAL_SURFACE('',#63438,0.32); +#63438 = AXIS2_PLACEMENT_3D('',#63439,#63440,#63441); +#63439 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#63440 = DIRECTION('',(9.337443596E-08,3.47E-15,-1.)); +#63441 = DIRECTION('',(3.772571871E-08,-1.,5.261770573187E-17)); +#63442 = ADVANCED_FACE('',(#63443),#63449,.T.); +#63443 = FACE_BOUND('',#63444,.T.); +#63444 = EDGE_LOOP('',(#63445,#63446,#63447,#63448)); +#63445 = ORIENTED_EDGE('',*,*,#63430,.F.); +#63446 = ORIENTED_EDGE('',*,*,#63269,.T.); +#63447 = ORIENTED_EDGE('',*,*,#63412,.T.); +#63448 = ORIENTED_EDGE('',*,*,#62589,.F.); +#63449 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63450,#63451,#63452,#63453,#63454) + ,(#63455,#63456,#63457,#63458,#63459) + ,(#63460,#63461,#63462,#63463,#63464 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,2.478041794175),(-0.165911730177,-8.08561080718E-02, + 2.397185686103,2.482241308208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63450 = CARTESIAN_POINT('',(-2.134020897087,-1.324076519193, + 1.699874109893)); +#63451 = CARTESIAN_POINT('',(-2.134020897087,-1.28154870814, + 1.699874109893)); +#63452 = CARTESIAN_POINT('',(-2.134020897087,1.11E-15,1.699874109893)); +#63453 = CARTESIAN_POINT('',(-2.134020897087,1.28154870814, + 1.699874109893)); +#63454 = CARTESIAN_POINT('',(-2.134020897087,1.324076519193, + 1.699874109893)); +#63455 = CARTESIAN_POINT('',(-2.053164789016,-1.324076519193,1.9)); +#63456 = CARTESIAN_POINT('',(-2.053164789016,-1.28154870814,1.9)); +#63457 = CARTESIAN_POINT('',(-2.053164789016,1.07E-15,1.9)); +#63458 = CARTESIAN_POINT('',(-2.053164789016,1.28154870814,1.9)); +#63459 = CARTESIAN_POINT('',(-2.053164789016,1.324076519193,1.9)); +#63460 = CARTESIAN_POINT('',(-1.837322063626,-1.324076519193,1.9)); +#63461 = CARTESIAN_POINT('',(-1.837322063626,-1.28154870814,1.9)); +#63462 = CARTESIAN_POINT('',(-1.837322063626,1.33E-15,1.9)); +#63463 = CARTESIAN_POINT('',(-1.837322063626,1.28154870814,1.9)); +#63464 = CARTESIAN_POINT('',(-1.837322063626,1.324076519193,1.9)); +#63465 = ADVANCED_FACE('',(#63466),#63484,.T.); +#63466 = FACE_BOUND('',#63467,.F.); +#63467 = EDGE_LOOP('',(#63468,#63469,#63477,#63483)); +#63468 = ORIENTED_EDGE('',*,*,#62707,.F.); +#63469 = ORIENTED_EDGE('',*,*,#63470,.T.); +#63470 = EDGE_CURVE('',#62699,#63471,#63473,.T.); +#63471 = VERTEX_POINT('',#63472); +#63472 = CARTESIAN_POINT('',(2.895,-1.01,0.66)); +#63473 = LINE('',#63474,#63475); +#63474 = CARTESIAN_POINT('',(2.775,-1.01,0.66)); +#63475 = VECTOR('',#63476,1.); +#63476 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#63477 = ORIENTED_EDGE('',*,*,#63478,.T.); +#63478 = EDGE_CURVE('',#63471,#62626,#63479,.T.); +#63479 = LINE('',#63480,#63481); +#63480 = CARTESIAN_POINT('',(2.895,-0.87,0.66)); +#63481 = VECTOR('',#63482,1.); +#63482 = DIRECTION('',(8.3E-16,-1.,-1.1E-16)); +#63483 = ORIENTED_EDGE('',*,*,#62634,.F.); +#63484 = PLANE('',#63485); +#63485 = AXIS2_PLACEMENT_3D('',#63486,#63487,#63488); +#63486 = CARTESIAN_POINT('',(2.775,-0.87,0.66)); +#63487 = DIRECTION('',(-1.17E-15,-1.1E-16,1.)); +#63488 = DIRECTION('',(-1.,-8.3E-16,-1.17E-15)); +#63489 = ADVANCED_FACE('',(#63490),#63508,.T.); +#63490 = FACE_BOUND('',#63491,.F.); +#63491 = EDGE_LOOP('',(#63492,#63500,#63506,#63507)); +#63492 = ORIENTED_EDGE('',*,*,#63493,.F.); +#63493 = EDGE_CURVE('',#63494,#62649,#63496,.T.); +#63494 = VERTEX_POINT('',#63495); +#63495 = CARTESIAN_POINT('',(2.895,-1.01,0.1)); +#63496 = LINE('',#63497,#63498); +#63497 = CARTESIAN_POINT('',(2.895,-0.87,0.1)); +#63498 = VECTOR('',#63499,1.); +#63499 = DIRECTION('',(-8.9E-16,-1.,-3.9E-16)); +#63500 = ORIENTED_EDGE('',*,*,#63501,.T.); +#63501 = EDGE_CURVE('',#63494,#62674,#63502,.T.); +#63502 = LINE('',#63503,#63504); +#63503 = CARTESIAN_POINT('',(2.895,-1.01,0.1)); +#63504 = VECTOR('',#63505,1.); +#63505 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#63506 = ORIENTED_EDGE('',*,*,#62673,.T.); +#63507 = ORIENTED_EDGE('',*,*,#62659,.F.); +#63508 = PLANE('',#63509); +#63509 = AXIS2_PLACEMENT_3D('',#63510,#63511,#63512); +#63510 = CARTESIAN_POINT('',(2.895,-0.87,0.1)); +#63511 = DIRECTION('',(4.7E-16,1.1E-16,-1.)); +#63512 = DIRECTION('',(1.,8.3E-16,4.7E-16)); +#63513 = ADVANCED_FACE('',(#63514),#63533,.T.); +#63514 = FACE_BOUND('',#63515,.T.); +#63515 = EDGE_LOOP('',(#63516,#63517,#63526,#63532)); +#63516 = ORIENTED_EDGE('',*,*,#63470,.T.); +#63517 = ORIENTED_EDGE('',*,*,#63518,.T.); +#63518 = EDGE_CURVE('',#63471,#63519,#63521,.T.); +#63519 = VERTEX_POINT('',#63520); +#63520 = CARTESIAN_POINT('',(2.895,-0.87,0.52)); +#63521 = CIRCLE('',#63522,0.14); +#63522 = AXIS2_PLACEMENT_3D('',#63523,#63524,#63525); +#63523 = CARTESIAN_POINT('',(2.895,-1.01,0.52)); +#63524 = DIRECTION('',(-1.,-8.3E-16,-1.17E-15)); +#63525 = DIRECTION('',(-8.3E-16,1.,-6.7E-16)); +#63526 = ORIENTED_EDGE('',*,*,#63527,.F.); +#63527 = EDGE_CURVE('',#62691,#63519,#63528,.T.); +#63528 = LINE('',#63529,#63530); +#63529 = CARTESIAN_POINT('',(2.775,-0.87,0.52)); +#63530 = VECTOR('',#63531,1.); +#63531 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#63532 = ORIENTED_EDGE('',*,*,#62698,.F.); +#63533 = CYLINDRICAL_SURFACE('',#63534,0.14); +#63534 = AXIS2_PLACEMENT_3D('',#63535,#63536,#63537); +#63535 = CARTESIAN_POINT('',(2.775,-1.01,0.52)); +#63536 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#63537 = DIRECTION('',(-7.2E-16,-1.1E-16,1.)); +#63538 = ADVANCED_FACE('',(#63539),#63557,.F.); +#63539 = FACE_BOUND('',#63540,.T.); +#63540 = EDGE_LOOP('',(#63541,#63542,#63543,#63551)); +#63541 = ORIENTED_EDGE('',*,*,#62690,.T.); +#63542 = ORIENTED_EDGE('',*,*,#63527,.T.); +#63543 = ORIENTED_EDGE('',*,*,#63544,.T.); +#63544 = EDGE_CURVE('',#63519,#63545,#63547,.T.); +#63545 = VERTEX_POINT('',#63546); +#63546 = CARTESIAN_POINT('',(2.895,-0.87,0.24)); +#63547 = LINE('',#63548,#63549); +#63548 = CARTESIAN_POINT('',(2.895,-0.87,0.66)); +#63549 = VECTOR('',#63550,1.); +#63550 = DIRECTION('',(1.39E-15,3.9E-16,-1.)); +#63551 = ORIENTED_EDGE('',*,*,#63552,.T.); +#63552 = EDGE_CURVE('',#63545,#62682,#63553,.T.); +#63553 = LINE('',#63554,#63555); +#63554 = CARTESIAN_POINT('',(2.895,-0.87,0.24)); +#63555 = VECTOR('',#63556,1.); +#63556 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#63557 = PLANE('',#63558); +#63558 = AXIS2_PLACEMENT_3D('',#63559,#63560,#63561); +#63559 = CARTESIAN_POINT('',(2.835,-0.87,0.38)); +#63560 = DIRECTION('',(-2.4E-16,-1.,-3.6E-16)); +#63561 = DIRECTION('',(-1.,2.4E-16,2.2E-16)); +#63562 = ADVANCED_FACE('',(#63563),#63575,.T.); +#63563 = FACE_BOUND('',#63564,.T.); +#63564 = EDGE_LOOP('',(#63565,#63566,#63567,#63568)); +#63565 = ORIENTED_EDGE('',*,*,#63501,.T.); +#63566 = ORIENTED_EDGE('',*,*,#62681,.T.); +#63567 = ORIENTED_EDGE('',*,*,#63552,.F.); +#63568 = ORIENTED_EDGE('',*,*,#63569,.F.); +#63569 = EDGE_CURVE('',#63494,#63545,#63570,.T.); +#63570 = CIRCLE('',#63571,0.14); +#63571 = AXIS2_PLACEMENT_3D('',#63572,#63573,#63574); +#63572 = CARTESIAN_POINT('',(2.895,-1.01,0.24)); +#63573 = DIRECTION('',(1.,8.3E-16,4.7E-16)); +#63574 = DIRECTION('',(8.3E-16,-1.,6.7E-16)); +#63575 = CYLINDRICAL_SURFACE('',#63576,0.14); +#63576 = AXIS2_PLACEMENT_3D('',#63577,#63578,#63579); +#63577 = CARTESIAN_POINT('',(2.895,-1.01,0.24)); +#63578 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#63579 = DIRECTION('',(3.E-17,1.1E-16,-1.)); +#63580 = ADVANCED_FACE('',(#63581),#63589,.T.); +#63581 = FACE_BOUND('',#63582,.T.); +#63582 = EDGE_LOOP('',(#63583,#63584,#63585,#63586,#63587,#63588)); +#63583 = ORIENTED_EDGE('',*,*,#62789,.F.); +#63584 = ORIENTED_EDGE('',*,*,#62813,.T.); +#63585 = ORIENTED_EDGE('',*,*,#62831,.T.); +#63586 = ORIENTED_EDGE('',*,*,#62853,.F.); +#63587 = ORIENTED_EDGE('',*,*,#62739,.T.); +#63588 = ORIENTED_EDGE('',*,*,#62723,.F.); +#63589 = PLANE('',#63590); +#63590 = AXIS2_PLACEMENT_3D('',#63591,#63592,#63593); +#63591 = CARTESIAN_POINT('',(-2.895,-0.87,0.66)); +#63592 = DIRECTION('',(-1.,4.4E-16,1.7E-16)); +#63593 = DIRECTION('',(-1.7E-16,5.E-17,-1.)); +#63594 = ADVANCED_FACE('',(#63595),#63603,.T.); +#63595 = FACE_BOUND('',#63596,.F.); +#63596 = EDGE_LOOP('',(#63597,#63598,#63599,#63600,#63601,#63602)); +#63597 = ORIENTED_EDGE('',*,*,#63478,.F.); +#63598 = ORIENTED_EDGE('',*,*,#63518,.T.); +#63599 = ORIENTED_EDGE('',*,*,#63544,.T.); +#63600 = ORIENTED_EDGE('',*,*,#63569,.F.); +#63601 = ORIENTED_EDGE('',*,*,#63493,.T.); +#63602 = ORIENTED_EDGE('',*,*,#62765,.F.); +#63603 = PLANE('',#63604); +#63604 = AXIS2_PLACEMENT_3D('',#63605,#63606,#63607); +#63605 = CARTESIAN_POINT('',(2.895,-0.87,0.66)); +#63606 = DIRECTION('',(1.,-8.9E-16,9.4E-16)); +#63607 = DIRECTION('',(-9.4E-16,-3.9E-16,1.)); +#63608 = ADVANCED_FACE('',(#63609),#63625,.F.); +#63609 = FACE_BOUND('',#63610,.F.); +#63610 = EDGE_LOOP('',(#63611,#63612,#63618,#63619)); +#63611 = ORIENTED_EDGE('',*,*,#63083,.F.); +#63612 = ORIENTED_EDGE('',*,*,#63613,.F.); +#63613 = EDGE_CURVE('',#62952,#63084,#63614,.T.); +#63614 = LINE('',#63615,#63616); +#63615 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63616 = VECTOR('',#63617,1.); +#63617 = DIRECTION('',(0.,1.,0.)); +#63618 = ORIENTED_EDGE('',*,*,#62951,.T.); +#63619 = ORIENTED_EDGE('',*,*,#63620,.F.); +#63620 = EDGE_CURVE('',#63086,#62954,#63621,.T.); +#63621 = LINE('',#63622,#63623); +#63622 = CARTESIAN_POINT('',(-0.85,1.85,0.1)); +#63623 = VECTOR('',#63624,1.); +#63624 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63625 = PLANE('',#63626); +#63626 = AXIS2_PLACEMENT_3D('',#63627,#63628,#63629); +#63627 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63628 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#63629 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#63630 = ADVANCED_FACE('',(#63631),#63642,.T.); +#63631 = FACE_BOUND('',#63632,.T.); +#63632 = EDGE_LOOP('',(#63633,#63634,#63640,#63641)); +#63633 = ORIENTED_EDGE('',*,*,#63093,.T.); +#63634 = ORIENTED_EDGE('',*,*,#63635,.T.); +#63635 = EDGE_CURVE('',#63094,#63030,#63636,.T.); +#63636 = LINE('',#63637,#63638); +#63637 = CARTESIAN_POINT('',(-0.7,1.85,0.25)); +#63638 = VECTOR('',#63639,1.); +#63639 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63640 = ORIENTED_EDGE('',*,*,#63037,.F.); +#63641 = ORIENTED_EDGE('',*,*,#63620,.F.); +#63642 = CYLINDRICAL_SURFACE('',#63643,0.15); +#63643 = AXIS2_PLACEMENT_3D('',#63644,#63645,#63646); +#63644 = CARTESIAN_POINT('',(-0.85,1.85,0.25)); +#63645 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63646 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#63647 = ADVANCED_FACE('',(#63648),#63666,.T.); +#63648 = FACE_BOUND('',#63649,.F.); +#63649 = EDGE_LOOP('',(#63650,#63658,#63664,#63665)); +#63650 = ORIENTED_EDGE('',*,*,#63651,.F.); +#63651 = EDGE_CURVE('',#63652,#62952,#63654,.T.); +#63652 = VERTEX_POINT('',#63653); +#63653 = CARTESIAN_POINT('',(-2.725,1.73,0.1)); +#63654 = LINE('',#63655,#63656); +#63655 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63656 = VECTOR('',#63657,1.); +#63657 = DIRECTION('',(1.,-6.7E-16,2.8E-16)); +#63658 = ORIENTED_EDGE('',*,*,#63659,.T.); +#63659 = EDGE_CURVE('',#63652,#63197,#63660,.T.); +#63660 = LINE('',#63661,#63662); +#63661 = CARTESIAN_POINT('',(-2.725,1.73,0.1)); +#63662 = VECTOR('',#63663,1.); +#63663 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#63664 = ORIENTED_EDGE('',*,*,#63196,.T.); +#63665 = ORIENTED_EDGE('',*,*,#62961,.T.); +#63666 = PLANE('',#63667); +#63667 = AXIS2_PLACEMENT_3D('',#63668,#63669,#63670); +#63668 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63669 = DIRECTION('',(-6.7E-16,-1.,2.2E-16)); +#63670 = DIRECTION('',(0.,-2.2E-16,-1.)); +#63671 = ADVANCED_FACE('',(#63672),#63683,.T.); +#63672 = FACE_BOUND('',#63673,.T.); +#63673 = EDGE_LOOP('',(#63674,#63675,#63681,#63682)); +#63674 = ORIENTED_EDGE('',*,*,#63102,.F.); +#63675 = ORIENTED_EDGE('',*,*,#63676,.T.); +#63676 = EDGE_CURVE('',#63103,#63021,#63677,.T.); +#63677 = LINE('',#63678,#63679); +#63678 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63679 = VECTOR('',#63680,1.); +#63680 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63681 = ORIENTED_EDGE('',*,*,#63029,.T.); +#63682 = ORIENTED_EDGE('',*,*,#63635,.F.); +#63683 = PLANE('',#63684); +#63684 = AXIS2_PLACEMENT_3D('',#63685,#63686,#63687); +#63685 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63686 = DIRECTION('',(1.,-5.E-16,2.2E-16)); +#63687 = DIRECTION('',(2.2E-16,-9.4E-16,-1.)); +#63688 = ADVANCED_FACE('',(#63689),#63700,.F.); +#63689 = FACE_BOUND('',#63690,.F.); +#63690 = EDGE_LOOP('',(#63691,#63692,#63693,#63694)); +#63691 = ORIENTED_EDGE('',*,*,#63110,.F.); +#63692 = ORIENTED_EDGE('',*,*,#63676,.T.); +#63693 = ORIENTED_EDGE('',*,*,#63020,.T.); +#63694 = ORIENTED_EDGE('',*,*,#63695,.F.); +#63695 = EDGE_CURVE('',#63111,#63013,#63696,.T.); +#63696 = LINE('',#63697,#63698); +#63697 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63698 = VECTOR('',#63699,1.); +#63699 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63700 = CYLINDRICAL_SURFACE('',#63701,0.15); +#63701 = AXIS2_PLACEMENT_3D('',#63702,#63703,#63704); +#63702 = CARTESIAN_POINT('',(-0.55,1.85,0.45)); +#63703 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63704 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63705 = ADVANCED_FACE('',(#63706),#63717,.F.); +#63706 = FACE_BOUND('',#63707,.F.); +#63707 = EDGE_LOOP('',(#63708,#63709,#63710,#63711)); +#63708 = ORIENTED_EDGE('',*,*,#63119,.F.); +#63709 = ORIENTED_EDGE('',*,*,#63695,.T.); +#63710 = ORIENTED_EDGE('',*,*,#63012,.T.); +#63711 = ORIENTED_EDGE('',*,*,#63712,.F.); +#63712 = EDGE_CURVE('',#63120,#63004,#63713,.T.); +#63713 = LINE('',#63714,#63715); +#63714 = CARTESIAN_POINT('',(0.55,1.85,0.6)); +#63715 = VECTOR('',#63716,1.); +#63716 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63717 = PLANE('',#63718); +#63718 = AXIS2_PLACEMENT_3D('',#63719,#63720,#63721); +#63719 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63720 = DIRECTION('',(0.,1.17E-15,1.)); +#63721 = DIRECTION('',(1.,-6.7E-16,7.839E-31)); +#63722 = ADVANCED_FACE('',(#63723),#63734,.F.); +#63723 = FACE_BOUND('',#63724,.F.); +#63724 = EDGE_LOOP('',(#63725,#63726,#63727,#63728)); +#63725 = ORIENTED_EDGE('',*,*,#63127,.F.); +#63726 = ORIENTED_EDGE('',*,*,#63712,.T.); +#63727 = ORIENTED_EDGE('',*,*,#63003,.T.); +#63728 = ORIENTED_EDGE('',*,*,#63729,.F.); +#63729 = EDGE_CURVE('',#63128,#62996,#63730,.T.); +#63730 = LINE('',#63731,#63732); +#63731 = CARTESIAN_POINT('',(0.7,1.85,0.45)); +#63732 = VECTOR('',#63733,1.); +#63733 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63734 = CYLINDRICAL_SURFACE('',#63735,0.15); +#63735 = AXIS2_PLACEMENT_3D('',#63736,#63737,#63738); +#63736 = CARTESIAN_POINT('',(0.55,1.85,0.45)); +#63737 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63738 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63739 = ADVANCED_FACE('',(#63740),#63758,.T.); +#63740 = FACE_BOUND('',#63741,.T.); +#63741 = EDGE_LOOP('',(#63742,#63750,#63756,#63757)); +#63742 = ORIENTED_EDGE('',*,*,#63743,.F.); +#63743 = EDGE_CURVE('',#63744,#62971,#63746,.T.); +#63744 = VERTEX_POINT('',#63745); +#63745 = CARTESIAN_POINT('',(2.725,1.73,0.1)); +#63746 = LINE('',#63747,#63748); +#63747 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#63748 = VECTOR('',#63749,1.); +#63749 = DIRECTION('',(-1.,4.4E-16,-3.9E-16)); +#63750 = ORIENTED_EDGE('',*,*,#63751,.T.); +#63751 = EDGE_CURVE('',#63744,#63053,#63752,.T.); +#63752 = LINE('',#63753,#63754); +#63753 = CARTESIAN_POINT('',(2.725,1.73,0.1)); +#63754 = VECTOR('',#63755,1.); +#63755 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63756 = ORIENTED_EDGE('',*,*,#63052,.T.); +#63757 = ORIENTED_EDGE('',*,*,#62970,.T.); +#63758 = PLANE('',#63759); +#63759 = AXIS2_PLACEMENT_3D('',#63760,#63761,#63762); +#63760 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#63761 = DIRECTION('',(-4.4E-16,-1.,-0.)); +#63762 = DIRECTION('',(-6.7E-16,2.948E-31,1.)); +#63763 = ADVANCED_FACE('',(#63764),#63775,.T.); +#63764 = FACE_BOUND('',#63765,.T.); +#63765 = EDGE_LOOP('',(#63766,#63767,#63773,#63774)); +#63766 = ORIENTED_EDGE('',*,*,#63136,.F.); +#63767 = ORIENTED_EDGE('',*,*,#63768,.T.); +#63768 = EDGE_CURVE('',#63137,#62987,#63769,.T.); +#63769 = LINE('',#63770,#63771); +#63770 = CARTESIAN_POINT('',(0.7,1.85,0.25)); +#63771 = VECTOR('',#63772,1.); +#63772 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63773 = ORIENTED_EDGE('',*,*,#62995,.T.); +#63774 = ORIENTED_EDGE('',*,*,#63729,.F.); +#63775 = PLANE('',#63776); +#63776 = AXIS2_PLACEMENT_3D('',#63777,#63778,#63779); +#63777 = CARTESIAN_POINT('',(0.7,1.85,0.1)); +#63778 = DIRECTION('',(-1.,5.E-16,-2.2E-16)); +#63779 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63780 = ADVANCED_FACE('',(#63781),#63797,.F.); +#63781 = FACE_BOUND('',#63782,.F.); +#63782 = EDGE_LOOP('',(#63783,#63784,#63790,#63791)); +#63783 = ORIENTED_EDGE('',*,*,#63153,.F.); +#63784 = ORIENTED_EDGE('',*,*,#63785,.T.); +#63785 = EDGE_CURVE('',#63145,#62979,#63786,.T.); +#63786 = LINE('',#63787,#63788); +#63787 = CARTESIAN_POINT('',(0.85,1.85,0.1)); +#63788 = VECTOR('',#63789,1.); +#63789 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63790 = ORIENTED_EDGE('',*,*,#62978,.T.); +#63791 = ORIENTED_EDGE('',*,*,#63792,.T.); +#63792 = EDGE_CURVE('',#62971,#63154,#63793,.T.); +#63793 = LINE('',#63794,#63795); +#63794 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#63795 = VECTOR('',#63796,1.); +#63796 = DIRECTION('',(0.,1.,0.)); +#63797 = PLANE('',#63798); +#63798 = AXIS2_PLACEMENT_3D('',#63799,#63800,#63801); +#63799 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63800 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#63801 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#63802 = ADVANCED_FACE('',(#63803),#63809,.T.); +#63803 = FACE_BOUND('',#63804,.T.); +#63804 = EDGE_LOOP('',(#63805,#63806,#63807,#63808)); +#63805 = ORIENTED_EDGE('',*,*,#63785,.T.); +#63806 = ORIENTED_EDGE('',*,*,#62986,.T.); +#63807 = ORIENTED_EDGE('',*,*,#63768,.F.); +#63808 = ORIENTED_EDGE('',*,*,#63144,.F.); +#63809 = CYLINDRICAL_SURFACE('',#63810,0.15); +#63810 = AXIS2_PLACEMENT_3D('',#63811,#63812,#63813); +#63811 = CARTESIAN_POINT('',(0.85,1.85,0.25)); +#63812 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63813 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#63814 = ADVANCED_FACE('',(#63815),#63842,.F.); +#63815 = FACE_BOUND('',#63816,.F.); +#63816 = EDGE_LOOP('',(#63817,#63826,#63827,#63836)); +#63817 = ORIENTED_EDGE('',*,*,#63818,.T.); +#63818 = EDGE_CURVE('',#63819,#63053,#63821,.T.); +#63819 = VERTEX_POINT('',#63820); +#63820 = CARTESIAN_POINT('',(2.775,1.68,0.66)); +#63821 = CIRCLE('',#63822,5.E-02); +#63822 = AXIS2_PLACEMENT_3D('',#63823,#63824,#63825); +#63823 = CARTESIAN_POINT('',(2.725,1.68,0.66)); +#63824 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63825 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#63826 = ORIENTED_EDGE('',*,*,#63060,.T.); +#63827 = ORIENTED_EDGE('',*,*,#63828,.F.); +#63828 = EDGE_CURVE('',#63829,#63061,#63831,.T.); +#63829 = VERTEX_POINT('',#63830); +#63830 = CARTESIAN_POINT('',(2.895,1.68,0.66)); +#63831 = CIRCLE('',#63832,0.17); +#63832 = AXIS2_PLACEMENT_3D('',#63833,#63834,#63835); +#63833 = CARTESIAN_POINT('',(2.725,1.68,0.66)); +#63834 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63835 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#63836 = ORIENTED_EDGE('',*,*,#63837,.F.); +#63837 = EDGE_CURVE('',#63819,#63829,#63838,.T.); +#63838 = LINE('',#63839,#63840); +#63839 = CARTESIAN_POINT('',(2.775,1.68,0.66)); +#63840 = VECTOR('',#63841,1.); +#63841 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#63842 = PLANE('',#63843); +#63843 = AXIS2_PLACEMENT_3D('',#63844,#63845,#63846); +#63844 = CARTESIAN_POINT('',(2.802781745931,1.757781745931,0.66)); +#63845 = DIRECTION('',(4.E-17,-8.3E-16,-1.)); +#63846 = DIRECTION('',(-0.707106781187,0.707106781187, + -6.151828996323E-16)); +#63847 = ADVANCED_FACE('',(#63848),#63866,.T.); +#63848 = FACE_BOUND('',#63849,.T.); +#63849 = EDGE_LOOP('',(#63850,#63851,#63859,#63865)); +#63850 = ORIENTED_EDGE('',*,*,#63068,.F.); +#63851 = ORIENTED_EDGE('',*,*,#63852,.F.); +#63852 = EDGE_CURVE('',#63853,#63061,#63855,.T.); +#63853 = VERTEX_POINT('',#63854); +#63854 = CARTESIAN_POINT('',(2.725,1.85,0.1)); +#63855 = LINE('',#63856,#63857); +#63856 = CARTESIAN_POINT('',(2.725,1.85,0.66)); +#63857 = VECTOR('',#63858,1.); +#63858 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63859 = ORIENTED_EDGE('',*,*,#63860,.T.); +#63860 = EDGE_CURVE('',#63853,#63154,#63861,.T.); +#63861 = LINE('',#63862,#63863); +#63862 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63863 = VECTOR('',#63864,1.); +#63864 = DIRECTION('',(-1.,4.4E-16,-6.7E-16)); +#63865 = ORIENTED_EDGE('',*,*,#63161,.T.); +#63866 = PLANE('',#63867); +#63867 = AXIS2_PLACEMENT_3D('',#63868,#63869,#63870); +#63868 = CARTESIAN_POINT('',(2.675,1.85,0.66)); +#63869 = DIRECTION('',(4.4E-16,1.,0.)); +#63870 = DIRECTION('',(6.7E-16,-2.948E-31,-1.)); +#63871 = ADVANCED_FACE('',(#63872),#63890,.T.); +#63872 = FACE_BOUND('',#63873,.F.); +#63873 = EDGE_LOOP('',(#63874,#63875,#63883,#63889)); +#63874 = ORIENTED_EDGE('',*,*,#63212,.F.); +#63875 = ORIENTED_EDGE('',*,*,#63876,.F.); +#63876 = EDGE_CURVE('',#63877,#63205,#63879,.T.); +#63877 = VERTEX_POINT('',#63878); +#63878 = CARTESIAN_POINT('',(-2.725,1.85,0.1)); +#63879 = LINE('',#63880,#63881); +#63880 = CARTESIAN_POINT('',(-2.725,1.85,0.66)); +#63881 = VECTOR('',#63882,1.); +#63882 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#63883 = ORIENTED_EDGE('',*,*,#63884,.T.); +#63884 = EDGE_CURVE('',#63877,#63084,#63885,.T.); +#63885 = LINE('',#63886,#63887); +#63886 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63887 = VECTOR('',#63888,1.); +#63888 = DIRECTION('',(1.,-6.7E-16,0.)); +#63889 = ORIENTED_EDGE('',*,*,#63170,.T.); +#63890 = PLANE('',#63891); +#63891 = AXIS2_PLACEMENT_3D('',#63892,#63893,#63894); +#63892 = CARTESIAN_POINT('',(-2.675,1.85,0.66)); +#63893 = DIRECTION('',(6.7E-16,1.,-2.2E-16)); +#63894 = DIRECTION('',(0.,2.2E-16,1.)); +#63895 = ADVANCED_FACE('',(#63896),#63923,.F.); +#63896 = FACE_BOUND('',#63897,.T.); +#63897 = EDGE_LOOP('',(#63898,#63907,#63908,#63917)); +#63898 = ORIENTED_EDGE('',*,*,#63899,.T.); +#63899 = EDGE_CURVE('',#63900,#63197,#63902,.T.); +#63900 = VERTEX_POINT('',#63901); +#63901 = CARTESIAN_POINT('',(-2.775,1.68,0.66)); +#63902 = CIRCLE('',#63903,5.E-02); +#63903 = AXIS2_PLACEMENT_3D('',#63904,#63905,#63906); +#63904 = CARTESIAN_POINT('',(-2.725,1.68,0.66)); +#63905 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#63906 = DIRECTION('',(1.11E-15,1.,-1.05E-15)); +#63907 = ORIENTED_EDGE('',*,*,#63204,.T.); +#63908 = ORIENTED_EDGE('',*,*,#63909,.F.); +#63909 = EDGE_CURVE('',#63910,#63205,#63912,.T.); +#63910 = VERTEX_POINT('',#63911); +#63911 = CARTESIAN_POINT('',(-2.895,1.68,0.66)); +#63912 = CIRCLE('',#63913,0.17); +#63913 = AXIS2_PLACEMENT_3D('',#63914,#63915,#63916); +#63914 = CARTESIAN_POINT('',(-2.725,1.68,0.66)); +#63915 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#63916 = DIRECTION('',(1.11E-15,1.,-1.05E-15)); +#63917 = ORIENTED_EDGE('',*,*,#63918,.F.); +#63918 = EDGE_CURVE('',#63900,#63910,#63919,.T.); +#63919 = LINE('',#63920,#63921); +#63920 = CARTESIAN_POINT('',(-2.775,1.68,0.66)); +#63921 = VECTOR('',#63922,1.); +#63922 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#63923 = PLANE('',#63924); +#63924 = AXIS2_PLACEMENT_3D('',#63925,#63926,#63927); +#63925 = CARTESIAN_POINT('',(-2.802781745931,1.757781745931,0.66)); +#63926 = DIRECTION('',(6.2E-16,-6.1E-16,-1.)); +#63927 = DIRECTION('',(-0.707106781187,-0.707106781187, + -7.071067811865E-18)); +#63928 = ADVANCED_FACE('',(#63929),#63940,.T.); +#63929 = FACE_BOUND('',#63930,.F.); +#63930 = EDGE_LOOP('',(#63931,#63932,#63938,#63939)); +#63931 = ORIENTED_EDGE('',*,*,#63884,.F.); +#63932 = ORIENTED_EDGE('',*,*,#63933,.T.); +#63933 = EDGE_CURVE('',#63877,#63652,#63934,.T.); +#63934 = LINE('',#63935,#63936); +#63935 = CARTESIAN_POINT('',(-2.725,1.85,0.1)); +#63936 = VECTOR('',#63937,1.); +#63937 = DIRECTION('',(-6.7E-16,-1.,1.14E-15)); +#63938 = ORIENTED_EDGE('',*,*,#63651,.T.); +#63939 = ORIENTED_EDGE('',*,*,#63613,.T.); +#63940 = PLANE('',#63941); +#63941 = AXIS2_PLACEMENT_3D('',#63942,#63943,#63944); +#63942 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63943 = DIRECTION('',(2.8E-16,-6.9E-16,-1.)); +#63944 = DIRECTION('',(6.7E-16,1.,-6.9E-16)); +#63945 = ADVANCED_FACE('',(#63946),#63965,.F.); +#63946 = FACE_BOUND('',#63947,.F.); +#63947 = EDGE_LOOP('',(#63948,#63956,#63957,#63958)); +#63948 = ORIENTED_EDGE('',*,*,#63949,.T.); +#63949 = EDGE_CURVE('',#63950,#63900,#63952,.T.); +#63950 = VERTEX_POINT('',#63951); +#63951 = CARTESIAN_POINT('',(-2.775,1.68,0.1)); +#63952 = LINE('',#63953,#63954); +#63953 = CARTESIAN_POINT('',(-2.775,1.68,0.1)); +#63954 = VECTOR('',#63955,1.); +#63955 = DIRECTION('',(5.E-16,8.3E-16,1.)); +#63956 = ORIENTED_EDGE('',*,*,#63899,.T.); +#63957 = ORIENTED_EDGE('',*,*,#63659,.F.); +#63958 = ORIENTED_EDGE('',*,*,#63959,.F.); +#63959 = EDGE_CURVE('',#63950,#63652,#63960,.T.); +#63960 = CIRCLE('',#63961,5.E-02); +#63961 = AXIS2_PLACEMENT_3D('',#63962,#63963,#63964); +#63962 = CARTESIAN_POINT('',(-2.725,1.68,0.1)); +#63963 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#63964 = DIRECTION('',(-7.77E-15,1.,-1.05E-15)); +#63965 = CYLINDRICAL_SURFACE('',#63966,5.E-02); +#63966 = AXIS2_PLACEMENT_3D('',#63967,#63968,#63969); +#63967 = CARTESIAN_POINT('',(-2.725,1.68,0.1)); +#63968 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#63969 = DIRECTION('',(-7.77E-15,1.,-6.1E-16)); +#63970 = ADVANCED_FACE('',(#63971),#63982,.T.); +#63971 = FACE_BOUND('',#63972,.T.); +#63972 = EDGE_LOOP('',(#63973,#63974,#63980,#63981)); +#63973 = ORIENTED_EDGE('',*,*,#63860,.F.); +#63974 = ORIENTED_EDGE('',*,*,#63975,.T.); +#63975 = EDGE_CURVE('',#63853,#63744,#63976,.T.); +#63976 = LINE('',#63977,#63978); +#63977 = CARTESIAN_POINT('',(2.725,1.85,0.1)); +#63978 = VECTOR('',#63979,1.); +#63979 = DIRECTION('',(-4.4E-16,-1.,9.2E-16)); +#63980 = ORIENTED_EDGE('',*,*,#63743,.T.); +#63981 = ORIENTED_EDGE('',*,*,#63792,.T.); +#63982 = PLANE('',#63983); +#63983 = AXIS2_PLACEMENT_3D('',#63984,#63985,#63986); +#63984 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63985 = DIRECTION('',(3.9E-16,-9.2E-16,-1.)); +#63986 = DIRECTION('',(-4.4E-16,-1.,9.2E-16)); +#63987 = ADVANCED_FACE('',(#63988),#64007,.F.); +#63988 = FACE_BOUND('',#63989,.F.); +#63989 = EDGE_LOOP('',(#63990,#63999,#64000,#64001)); +#63990 = ORIENTED_EDGE('',*,*,#63991,.T.); +#63991 = EDGE_CURVE('',#63992,#63744,#63994,.T.); +#63992 = VERTEX_POINT('',#63993); +#63993 = CARTESIAN_POINT('',(2.775,1.68,0.1)); +#63994 = CIRCLE('',#63995,5.E-02); +#63995 = AXIS2_PLACEMENT_3D('',#63996,#63997,#63998); +#63996 = CARTESIAN_POINT('',(2.725,1.68,0.1)); +#63997 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63998 = DIRECTION('',(8.88E-15,1.,-8.3E-16)); +#63999 = ORIENTED_EDGE('',*,*,#63751,.T.); +#64000 = ORIENTED_EDGE('',*,*,#63818,.F.); +#64001 = ORIENTED_EDGE('',*,*,#64002,.F.); +#64002 = EDGE_CURVE('',#63992,#63819,#64003,.T.); +#64003 = LINE('',#64004,#64005); +#64004 = CARTESIAN_POINT('',(2.775,1.68,0.1)); +#64005 = VECTOR('',#64006,1.); +#64006 = DIRECTION('',(-1.17E-15,1.05E-15,1.)); +#64007 = CYLINDRICAL_SURFACE('',#64008,5.E-02); +#64008 = AXIS2_PLACEMENT_3D('',#64009,#64010,#64011); +#64009 = CARTESIAN_POINT('',(2.725,1.68,0.1)); +#64010 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64011 = DIRECTION('',(8.88E-15,1.,-8.3E-16)); +#64012 = ADVANCED_FACE('',(#64013),#64038,.T.); +#64013 = FACE_BOUND('',#64014,.T.); +#64014 = EDGE_LOOP('',(#64015,#64023,#64031,#64037)); +#64015 = ORIENTED_EDGE('',*,*,#64016,.F.); +#64016 = EDGE_CURVE('',#64017,#63819,#64019,.T.); +#64017 = VERTEX_POINT('',#64018); +#64018 = CARTESIAN_POINT('',(2.775,1.01,0.66)); +#64019 = LINE('',#64020,#64021); +#64020 = CARTESIAN_POINT('',(2.775,0.87,0.66)); +#64021 = VECTOR('',#64022,1.); +#64022 = DIRECTION('',(2.16E-15,1.,-7.8E-16)); +#64023 = ORIENTED_EDGE('',*,*,#64024,.T.); +#64024 = EDGE_CURVE('',#64017,#64025,#64027,.T.); +#64025 = VERTEX_POINT('',#64026); +#64026 = CARTESIAN_POINT('',(2.895,1.01,0.66)); +#64027 = LINE('',#64028,#64029); +#64028 = CARTESIAN_POINT('',(2.775,1.01,0.66)); +#64029 = VECTOR('',#64030,1.); +#64030 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64031 = ORIENTED_EDGE('',*,*,#64032,.T.); +#64032 = EDGE_CURVE('',#64025,#63829,#64033,.T.); +#64033 = LINE('',#64034,#64035); +#64034 = CARTESIAN_POINT('',(2.895,0.87,0.66)); +#64035 = VECTOR('',#64036,1.); +#64036 = DIRECTION('',(2.16E-15,1.,-7.8E-16)); +#64037 = ORIENTED_EDGE('',*,*,#63837,.F.); +#64038 = PLANE('',#64039); +#64039 = AXIS2_PLACEMENT_3D('',#64040,#64041,#64042); +#64040 = CARTESIAN_POINT('',(2.775,0.87,0.66)); +#64041 = DIRECTION('',(-9.4E-16,7.8E-16,1.)); +#64042 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64043 = ADVANCED_FACE('',(#64044),#64063,.T.); +#64044 = FACE_BOUND('',#64045,.T.); +#64045 = EDGE_LOOP('',(#64046,#64047,#64055,#64062)); +#64046 = ORIENTED_EDGE('',*,*,#63828,.F.); +#64047 = ORIENTED_EDGE('',*,*,#64048,.T.); +#64048 = EDGE_CURVE('',#63829,#64049,#64051,.T.); +#64049 = VERTEX_POINT('',#64050); +#64050 = CARTESIAN_POINT('',(2.895,1.68,0.1)); +#64051 = LINE('',#64052,#64053); +#64052 = CARTESIAN_POINT('',(2.895,1.68,0.66)); +#64053 = VECTOR('',#64054,1.); +#64054 = DIRECTION('',(1.17E-15,-1.05E-15,-1.)); +#64055 = ORIENTED_EDGE('',*,*,#64056,.T.); +#64056 = EDGE_CURVE('',#64049,#63853,#64057,.T.); +#64057 = CIRCLE('',#64058,0.17); +#64058 = AXIS2_PLACEMENT_3D('',#64059,#64060,#64061); +#64059 = CARTESIAN_POINT('',(2.725,1.68,0.1)); +#64060 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64061 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#64062 = ORIENTED_EDGE('',*,*,#63852,.T.); +#64063 = CYLINDRICAL_SURFACE('',#64064,0.17); +#64064 = AXIS2_PLACEMENT_3D('',#64065,#64066,#64067); +#64065 = CARTESIAN_POINT('',(2.725,1.68,0.66)); +#64066 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64067 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#64068 = ADVANCED_FACE('',(#64069),#64088,.T.); +#64069 = FACE_BOUND('',#64070,.T.); +#64070 = EDGE_LOOP('',(#64071,#64072,#64081,#64087)); +#64071 = ORIENTED_EDGE('',*,*,#63876,.F.); +#64072 = ORIENTED_EDGE('',*,*,#64073,.F.); +#64073 = EDGE_CURVE('',#64074,#63877,#64076,.T.); +#64074 = VERTEX_POINT('',#64075); +#64075 = CARTESIAN_POINT('',(-2.895,1.68,0.1)); +#64076 = CIRCLE('',#64077,0.17); +#64077 = AXIS2_PLACEMENT_3D('',#64078,#64079,#64080); +#64078 = CARTESIAN_POINT('',(-2.725,1.68,0.1)); +#64079 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#64080 = DIRECTION('',(1.11E-15,1.,-1.05E-15)); +#64081 = ORIENTED_EDGE('',*,*,#64082,.F.); +#64082 = EDGE_CURVE('',#63910,#64074,#64083,.T.); +#64083 = LINE('',#64084,#64085); +#64084 = CARTESIAN_POINT('',(-2.895,1.68,0.66)); +#64085 = VECTOR('',#64086,1.); +#64086 = DIRECTION('',(-5.E-16,-8.3E-16,-1.)); +#64087 = ORIENTED_EDGE('',*,*,#63909,.T.); +#64088 = CYLINDRICAL_SURFACE('',#64089,0.17); +#64089 = AXIS2_PLACEMENT_3D('',#64090,#64091,#64092); +#64090 = CARTESIAN_POINT('',(-2.725,1.68,0.66)); +#64091 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#64092 = DIRECTION('',(1.11E-15,1.,-6.1E-16)); +#64093 = ADVANCED_FACE('',(#64094),#64119,.T.); +#64094 = FACE_BOUND('',#64095,.F.); +#64095 = EDGE_LOOP('',(#64096,#64104,#64112,#64118)); +#64096 = ORIENTED_EDGE('',*,*,#64097,.F.); +#64097 = EDGE_CURVE('',#64098,#63900,#64100,.T.); +#64098 = VERTEX_POINT('',#64099); +#64099 = CARTESIAN_POINT('',(-2.775,1.01,0.66)); +#64100 = LINE('',#64101,#64102); +#64101 = CARTESIAN_POINT('',(-2.775,0.87,0.66)); +#64102 = VECTOR('',#64103,1.); +#64103 = DIRECTION('',(-1.05E-15,1.,-1.E-15)); +#64104 = ORIENTED_EDGE('',*,*,#64105,.T.); +#64105 = EDGE_CURVE('',#64098,#64106,#64108,.T.); +#64106 = VERTEX_POINT('',#64107); +#64107 = CARTESIAN_POINT('',(-2.895,1.01,0.66)); +#64108 = LINE('',#64109,#64110); +#64109 = CARTESIAN_POINT('',(-2.775,1.01,0.66)); +#64110 = VECTOR('',#64111,1.); +#64111 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#64112 = ORIENTED_EDGE('',*,*,#64113,.T.); +#64113 = EDGE_CURVE('',#64106,#63910,#64114,.T.); +#64114 = LINE('',#64115,#64116); +#64115 = CARTESIAN_POINT('',(-2.895,0.87,0.66)); +#64116 = VECTOR('',#64117,1.); +#64117 = DIRECTION('',(-1.05E-15,1.,-1.E-15)); +#64118 = ORIENTED_EDGE('',*,*,#63918,.F.); +#64119 = PLANE('',#64120); +#64120 = AXIS2_PLACEMENT_3D('',#64121,#64122,#64123); +#64121 = CARTESIAN_POINT('',(-2.775,0.87,0.66)); +#64122 = DIRECTION('',(2.8E-16,5.6E-16,1.)); +#64123 = DIRECTION('',(1.,1.05E-15,-2.8E-16)); +#64124 = ADVANCED_FACE('',(#64125),#64136,.F.); +#64125 = FACE_BOUND('',#64126,.T.); +#64126 = EDGE_LOOP('',(#64127,#64128,#64129,#64130)); +#64127 = ORIENTED_EDGE('',*,*,#64073,.T.); +#64128 = ORIENTED_EDGE('',*,*,#63933,.T.); +#64129 = ORIENTED_EDGE('',*,*,#63959,.F.); +#64130 = ORIENTED_EDGE('',*,*,#64131,.F.); +#64131 = EDGE_CURVE('',#64074,#63950,#64132,.T.); +#64132 = LINE('',#64133,#64134); +#64133 = CARTESIAN_POINT('',(-2.895,1.68,0.1)); +#64134 = VECTOR('',#64135,1.); +#64135 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64136 = PLANE('',#64137); +#64137 = AXIS2_PLACEMENT_3D('',#64138,#64139,#64140); +#64138 = CARTESIAN_POINT('',(-2.802781745931,1.757781745931,0.1)); +#64139 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#64140 = DIRECTION('',(-0.707106781187,-0.707106781187, + -7.071067811865E-18)); +#64141 = ADVANCED_FACE('',(#64142),#64178,.T.); +#64142 = FACE_BOUND('',#64143,.F.); +#64143 = EDGE_LOOP('',(#64144,#64152,#64161,#64169,#64176,#64177)); +#64144 = ORIENTED_EDGE('',*,*,#64145,.F.); +#64145 = EDGE_CURVE('',#64146,#63950,#64148,.T.); +#64146 = VERTEX_POINT('',#64147); +#64147 = CARTESIAN_POINT('',(-2.775,1.01,0.1)); +#64148 = LINE('',#64149,#64150); +#64149 = CARTESIAN_POINT('',(-2.775,0.87,0.1)); +#64150 = VECTOR('',#64151,1.); +#64151 = DIRECTION('',(-1.05E-15,1.,-1.E-15)); +#64152 = ORIENTED_EDGE('',*,*,#64153,.T.); +#64153 = EDGE_CURVE('',#64146,#64154,#64156,.T.); +#64154 = VERTEX_POINT('',#64155); +#64155 = CARTESIAN_POINT('',(-2.775,0.87,0.24)); +#64156 = CIRCLE('',#64157,0.14); +#64157 = AXIS2_PLACEMENT_3D('',#64158,#64159,#64160); +#64158 = CARTESIAN_POINT('',(-2.775,1.01,0.24)); +#64159 = DIRECTION('',(-1.,-1.05E-15,-4.2E-16)); +#64160 = DIRECTION('',(-1.05E-15,1.,-2.2E-16)); +#64161 = ORIENTED_EDGE('',*,*,#64162,.T.); +#64162 = EDGE_CURVE('',#64154,#64163,#64165,.T.); +#64163 = VERTEX_POINT('',#64164); +#64164 = CARTESIAN_POINT('',(-2.775,0.87,0.52)); +#64165 = LINE('',#64166,#64167); +#64166 = CARTESIAN_POINT('',(-2.775,0.87,0.1)); +#64167 = VECTOR('',#64168,1.); +#64168 = DIRECTION('',(5.E-16,8.3E-16,1.)); +#64169 = ORIENTED_EDGE('',*,*,#64170,.F.); +#64170 = EDGE_CURVE('',#64098,#64163,#64171,.T.); +#64171 = CIRCLE('',#64172,0.14); +#64172 = AXIS2_PLACEMENT_3D('',#64173,#64174,#64175); +#64173 = CARTESIAN_POINT('',(-2.775,1.01,0.52)); +#64174 = DIRECTION('',(1.,1.05E-15,-2.8E-16)); +#64175 = DIRECTION('',(1.05E-15,-1.,2.2E-16)); +#64176 = ORIENTED_EDGE('',*,*,#64097,.T.); +#64177 = ORIENTED_EDGE('',*,*,#63949,.F.); +#64178 = PLANE('',#64179); +#64179 = AXIS2_PLACEMENT_3D('',#64180,#64181,#64182); +#64180 = CARTESIAN_POINT('',(-2.775,0.87,0.1)); +#64181 = DIRECTION('',(1.,-6.7E-16,-5.E-16)); +#64182 = DIRECTION('',(-5.E-16,-8.3E-16,-1.)); +#64183 = ADVANCED_FACE('',(#64184),#64195,.F.); +#64184 = FACE_BOUND('',#64185,.F.); +#64185 = EDGE_LOOP('',(#64186,#64187,#64188,#64189)); +#64186 = ORIENTED_EDGE('',*,*,#64056,.T.); +#64187 = ORIENTED_EDGE('',*,*,#63975,.T.); +#64188 = ORIENTED_EDGE('',*,*,#63991,.F.); +#64189 = ORIENTED_EDGE('',*,*,#64190,.F.); +#64190 = EDGE_CURVE('',#64049,#63992,#64191,.T.); +#64191 = LINE('',#64192,#64193); +#64192 = CARTESIAN_POINT('',(2.895,1.68,0.1)); +#64193 = VECTOR('',#64194,1.); +#64194 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64195 = PLANE('',#64196); +#64196 = AXIS2_PLACEMENT_3D('',#64197,#64198,#64199); +#64197 = CARTESIAN_POINT('',(2.802781745931,1.757781745931,0.1)); +#64198 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64199 = DIRECTION('',(-0.707106781187,0.707106781187, + -6.151828996323E-16)); +#64200 = ADVANCED_FACE('',(#64201),#64237,.T.); +#64201 = FACE_BOUND('',#64202,.T.); +#64202 = EDGE_LOOP('',(#64203,#64211,#64220,#64228,#64235,#64236)); +#64203 = ORIENTED_EDGE('',*,*,#64204,.F.); +#64204 = EDGE_CURVE('',#64205,#63992,#64207,.T.); +#64205 = VERTEX_POINT('',#64206); +#64206 = CARTESIAN_POINT('',(2.775,1.01,0.1)); +#64207 = LINE('',#64208,#64209); +#64208 = CARTESIAN_POINT('',(2.775,0.87,0.1)); +#64209 = VECTOR('',#64210,1.); +#64210 = DIRECTION('',(2.16E-15,1.,-7.8E-16)); +#64211 = ORIENTED_EDGE('',*,*,#64212,.T.); +#64212 = EDGE_CURVE('',#64205,#64213,#64215,.T.); +#64213 = VERTEX_POINT('',#64214); +#64214 = CARTESIAN_POINT('',(2.775,0.87,0.24)); +#64215 = CIRCLE('',#64216,0.14); +#64216 = AXIS2_PLACEMENT_3D('',#64217,#64218,#64219); +#64217 = CARTESIAN_POINT('',(2.775,1.01,0.24)); +#64218 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64219 = DIRECTION('',(2.16E-15,1.,0.)); +#64220 = ORIENTED_EDGE('',*,*,#64221,.T.); +#64221 = EDGE_CURVE('',#64213,#64222,#64224,.T.); +#64222 = VERTEX_POINT('',#64223); +#64223 = CARTESIAN_POINT('',(2.775,0.87,0.52)); +#64224 = LINE('',#64225,#64226); +#64225 = CARTESIAN_POINT('',(2.775,0.87,0.1)); +#64226 = VECTOR('',#64227,1.); +#64227 = DIRECTION('',(-1.17E-15,1.05E-15,1.)); +#64228 = ORIENTED_EDGE('',*,*,#64229,.F.); +#64229 = EDGE_CURVE('',#64017,#64222,#64230,.T.); +#64230 = CIRCLE('',#64231,0.14); +#64231 = AXIS2_PLACEMENT_3D('',#64232,#64233,#64234); +#64232 = CARTESIAN_POINT('',(2.775,1.01,0.52)); +#64233 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64234 = DIRECTION('',(-2.16E-15,-1.,0.)); +#64235 = ORIENTED_EDGE('',*,*,#64016,.T.); +#64236 = ORIENTED_EDGE('',*,*,#64002,.F.); +#64237 = PLANE('',#64238); +#64238 = AXIS2_PLACEMENT_3D('',#64239,#64240,#64241); +#64239 = CARTESIAN_POINT('',(2.775,0.87,0.1)); +#64240 = DIRECTION('',(-1.,4.4E-16,-1.17E-15)); +#64241 = DIRECTION('',(-1.17E-15,1.05E-15,1.)); +#64242 = ADVANCED_FACE('',(#64243),#64262,.T.); +#64243 = FACE_BOUND('',#64244,.T.); +#64244 = EDGE_LOOP('',(#64245,#64246,#64254,#64261)); +#64245 = ORIENTED_EDGE('',*,*,#64229,.T.); +#64246 = ORIENTED_EDGE('',*,*,#64247,.T.); +#64247 = EDGE_CURVE('',#64222,#64248,#64250,.T.); +#64248 = VERTEX_POINT('',#64249); +#64249 = CARTESIAN_POINT('',(2.895,0.87,0.52)); +#64250 = LINE('',#64251,#64252); +#64251 = CARTESIAN_POINT('',(2.775,0.87,0.52)); +#64252 = VECTOR('',#64253,1.); +#64253 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64254 = ORIENTED_EDGE('',*,*,#64255,.F.); +#64255 = EDGE_CURVE('',#64025,#64248,#64256,.T.); +#64256 = CIRCLE('',#64257,0.14); +#64257 = AXIS2_PLACEMENT_3D('',#64258,#64259,#64260); +#64258 = CARTESIAN_POINT('',(2.895,1.01,0.52)); +#64259 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64260 = DIRECTION('',(-2.16E-15,-1.,0.)); +#64261 = ORIENTED_EDGE('',*,*,#64024,.F.); +#64262 = CYLINDRICAL_SURFACE('',#64263,0.14); +#64263 = AXIS2_PLACEMENT_3D('',#64264,#64265,#64266); +#64264 = CARTESIAN_POINT('',(2.775,1.01,0.52)); +#64265 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64266 = DIRECTION('',(-9.4E-16,7.8E-16,1.)); +#64267 = ADVANCED_FACE('',(#64268),#64296,.T.); +#64268 = FACE_BOUND('',#64269,.T.); +#64269 = EDGE_LOOP('',(#64270,#64271,#64272,#64280,#64289,#64295)); +#64270 = ORIENTED_EDGE('',*,*,#64032,.F.); +#64271 = ORIENTED_EDGE('',*,*,#64255,.T.); +#64272 = ORIENTED_EDGE('',*,*,#64273,.T.); +#64273 = EDGE_CURVE('',#64248,#64274,#64276,.T.); +#64274 = VERTEX_POINT('',#64275); +#64275 = CARTESIAN_POINT('',(2.895,0.87,0.24)); +#64276 = LINE('',#64277,#64278); +#64277 = CARTESIAN_POINT('',(2.895,0.87,0.66)); +#64278 = VECTOR('',#64279,1.); +#64279 = DIRECTION('',(1.17E-15,-1.05E-15,-1.)); +#64280 = ORIENTED_EDGE('',*,*,#64281,.F.); +#64281 = EDGE_CURVE('',#64282,#64274,#64284,.T.); +#64282 = VERTEX_POINT('',#64283); +#64283 = CARTESIAN_POINT('',(2.895,1.01,0.1)); +#64284 = CIRCLE('',#64285,0.14); +#64285 = AXIS2_PLACEMENT_3D('',#64286,#64287,#64288); +#64286 = CARTESIAN_POINT('',(2.895,1.01,0.24)); +#64287 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64288 = DIRECTION('',(2.16E-15,1.,0.)); +#64289 = ORIENTED_EDGE('',*,*,#64290,.T.); +#64290 = EDGE_CURVE('',#64282,#64049,#64291,.T.); +#64291 = LINE('',#64292,#64293); +#64292 = CARTESIAN_POINT('',(2.895,0.87,0.1)); +#64293 = VECTOR('',#64294,1.); +#64294 = DIRECTION('',(4.4E-16,1.,-1.05E-15)); +#64295 = ORIENTED_EDGE('',*,*,#64048,.F.); +#64296 = PLANE('',#64297); +#64297 = AXIS2_PLACEMENT_3D('',#64298,#64299,#64300); +#64298 = CARTESIAN_POINT('',(2.895,0.87,0.66)); +#64299 = DIRECTION('',(1.,-4.4E-16,1.17E-15)); +#64300 = DIRECTION('',(1.17E-15,-1.05E-15,-1.)); +#64301 = ADVANCED_FACE('',(#64302),#64338,.T.); +#64302 = FACE_BOUND('',#64303,.F.); +#64303 = EDGE_LOOP('',(#64304,#64305,#64314,#64322,#64331,#64337)); +#64304 = ORIENTED_EDGE('',*,*,#64113,.F.); +#64305 = ORIENTED_EDGE('',*,*,#64306,.T.); +#64306 = EDGE_CURVE('',#64106,#64307,#64309,.T.); +#64307 = VERTEX_POINT('',#64308); +#64308 = CARTESIAN_POINT('',(-2.895,0.87,0.52)); +#64309 = CIRCLE('',#64310,0.14); +#64310 = AXIS2_PLACEMENT_3D('',#64311,#64312,#64313); +#64311 = CARTESIAN_POINT('',(-2.895,1.01,0.52)); +#64312 = DIRECTION('',(1.,1.05E-15,-2.8E-16)); +#64313 = DIRECTION('',(1.05E-15,-1.,2.2E-16)); +#64314 = ORIENTED_EDGE('',*,*,#64315,.T.); +#64315 = EDGE_CURVE('',#64307,#64316,#64318,.T.); +#64316 = VERTEX_POINT('',#64317); +#64317 = CARTESIAN_POINT('',(-2.895,0.87,0.24)); +#64318 = LINE('',#64319,#64320); +#64319 = CARTESIAN_POINT('',(-2.895,0.87,0.66)); +#64320 = VECTOR('',#64321,1.); +#64321 = DIRECTION('',(-5.E-16,-8.3E-16,-1.)); +#64322 = ORIENTED_EDGE('',*,*,#64323,.F.); +#64323 = EDGE_CURVE('',#64324,#64316,#64326,.T.); +#64324 = VERTEX_POINT('',#64325); +#64325 = CARTESIAN_POINT('',(-2.895,1.01,0.1)); +#64326 = CIRCLE('',#64327,0.14); +#64327 = AXIS2_PLACEMENT_3D('',#64328,#64329,#64330); +#64328 = CARTESIAN_POINT('',(-2.895,1.01,0.24)); +#64329 = DIRECTION('',(-1.,-1.05E-15,-4.2E-16)); +#64330 = DIRECTION('',(-1.05E-15,1.,-2.2E-16)); +#64331 = ORIENTED_EDGE('',*,*,#64332,.T.); +#64332 = EDGE_CURVE('',#64324,#64074,#64333,.T.); +#64333 = LINE('',#64334,#64335); +#64334 = CARTESIAN_POINT('',(-2.895,0.87,0.1)); +#64335 = VECTOR('',#64336,1.); +#64336 = DIRECTION('',(6.7E-16,1.,-1.28E-15)); +#64337 = ORIENTED_EDGE('',*,*,#64082,.F.); +#64338 = PLANE('',#64339); +#64339 = AXIS2_PLACEMENT_3D('',#64340,#64341,#64342); +#64340 = CARTESIAN_POINT('',(-2.895,0.87,0.66)); +#64341 = DIRECTION('',(-1.,6.7E-16,5.E-16)); +#64342 = DIRECTION('',(5.E-16,8.3E-16,1.)); +#64343 = ADVANCED_FACE('',(#64344),#64355,.T.); +#64344 = FACE_BOUND('',#64345,.T.); +#64345 = EDGE_LOOP('',(#64346,#64347,#64348,#64354)); +#64346 = ORIENTED_EDGE('',*,*,#64105,.T.); +#64347 = ORIENTED_EDGE('',*,*,#64306,.T.); +#64348 = ORIENTED_EDGE('',*,*,#64349,.F.); +#64349 = EDGE_CURVE('',#64163,#64307,#64350,.T.); +#64350 = LINE('',#64351,#64352); +#64351 = CARTESIAN_POINT('',(-2.775,0.87,0.52)); +#64352 = VECTOR('',#64353,1.); +#64353 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#64354 = ORIENTED_EDGE('',*,*,#64170,.F.); +#64355 = CYLINDRICAL_SURFACE('',#64356,0.14); +#64356 = AXIS2_PLACEMENT_3D('',#64357,#64358,#64359); +#64357 = CARTESIAN_POINT('',(-2.775,1.01,0.52)); +#64358 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#64359 = DIRECTION('',(2.8E-16,5.6E-16,1.)); +#64360 = ADVANCED_FACE('',(#64361),#64372,.T.); +#64361 = FACE_BOUND('',#64362,.F.); +#64362 = EDGE_LOOP('',(#64363,#64364,#64370,#64371)); +#64363 = ORIENTED_EDGE('',*,*,#64332,.F.); +#64364 = ORIENTED_EDGE('',*,*,#64365,.T.); +#64365 = EDGE_CURVE('',#64324,#64146,#64366,.T.); +#64366 = LINE('',#64367,#64368); +#64367 = CARTESIAN_POINT('',(-2.895,1.01,0.1)); +#64368 = VECTOR('',#64369,1.); +#64369 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64370 = ORIENTED_EDGE('',*,*,#64145,.T.); +#64371 = ORIENTED_EDGE('',*,*,#64131,.F.); +#64372 = PLANE('',#64373); +#64373 = AXIS2_PLACEMENT_3D('',#64374,#64375,#64376); +#64374 = CARTESIAN_POINT('',(-2.895,0.87,0.1)); +#64375 = DIRECTION('',(4.2E-16,-5.6E-16,-1.)); +#64376 = DIRECTION('',(-1.,-1.05E-15,-4.2E-16)); +#64377 = ADVANCED_FACE('',(#64378),#64389,.F.); +#64378 = FACE_BOUND('',#64379,.T.); +#64379 = EDGE_LOOP('',(#64380,#64381,#64382,#64383)); +#64380 = ORIENTED_EDGE('',*,*,#64162,.T.); +#64381 = ORIENTED_EDGE('',*,*,#64349,.T.); +#64382 = ORIENTED_EDGE('',*,*,#64315,.T.); +#64383 = ORIENTED_EDGE('',*,*,#64384,.T.); +#64384 = EDGE_CURVE('',#64316,#64154,#64385,.T.); +#64385 = LINE('',#64386,#64387); +#64386 = CARTESIAN_POINT('',(-2.895,0.87,0.24)); +#64387 = VECTOR('',#64388,1.); +#64388 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64389 = PLANE('',#64390); +#64390 = AXIS2_PLACEMENT_3D('',#64391,#64392,#64393); +#64391 = CARTESIAN_POINT('',(-2.835,0.87,0.38)); +#64392 = DIRECTION('',(2.E-17,1.,-1.25E-15)); +#64393 = DIRECTION('',(1.,-2.E-17,6.7E-16)); +#64394 = ADVANCED_FACE('',(#64395),#64401,.T.); +#64395 = FACE_BOUND('',#64396,.T.); +#64396 = EDGE_LOOP('',(#64397,#64398,#64399,#64400)); +#64397 = ORIENTED_EDGE('',*,*,#64365,.T.); +#64398 = ORIENTED_EDGE('',*,*,#64153,.T.); +#64399 = ORIENTED_EDGE('',*,*,#64384,.F.); +#64400 = ORIENTED_EDGE('',*,*,#64323,.F.); +#64401 = CYLINDRICAL_SURFACE('',#64402,0.14); +#64402 = AXIS2_PLACEMENT_3D('',#64403,#64404,#64405); +#64403 = CARTESIAN_POINT('',(-2.895,1.01,0.24)); +#64404 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64405 = DIRECTION('',(4.2E-16,-5.6E-16,-1.)); +#64406 = ADVANCED_FACE('',(#64407),#64418,.T.); +#64407 = FACE_BOUND('',#64408,.T.); +#64408 = EDGE_LOOP('',(#64409,#64410,#64416,#64417)); +#64409 = ORIENTED_EDGE('',*,*,#64290,.F.); +#64410 = ORIENTED_EDGE('',*,*,#64411,.T.); +#64411 = EDGE_CURVE('',#64282,#64205,#64412,.T.); +#64412 = LINE('',#64413,#64414); +#64413 = CARTESIAN_POINT('',(2.895,1.01,0.1)); +#64414 = VECTOR('',#64415,1.); +#64415 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64416 = ORIENTED_EDGE('',*,*,#64204,.T.); +#64417 = ORIENTED_EDGE('',*,*,#64190,.F.); +#64418 = PLANE('',#64419); +#64419 = AXIS2_PLACEMENT_3D('',#64420,#64421,#64422); +#64420 = CARTESIAN_POINT('',(2.895,0.87,0.1)); +#64421 = DIRECTION('',(2.5E-16,-7.8E-16,-1.)); +#64422 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64423 = ADVANCED_FACE('',(#64424),#64435,.T.); +#64424 = FACE_BOUND('',#64425,.T.); +#64425 = EDGE_LOOP('',(#64426,#64427,#64433,#64434)); +#64426 = ORIENTED_EDGE('',*,*,#64281,.T.); +#64427 = ORIENTED_EDGE('',*,*,#64428,.T.); +#64428 = EDGE_CURVE('',#64274,#64213,#64429,.T.); +#64429 = LINE('',#64430,#64431); +#64430 = CARTESIAN_POINT('',(2.895,0.87,0.24)); +#64431 = VECTOR('',#64432,1.); +#64432 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64433 = ORIENTED_EDGE('',*,*,#64212,.F.); +#64434 = ORIENTED_EDGE('',*,*,#64411,.F.); +#64435 = CYLINDRICAL_SURFACE('',#64436,0.14); +#64436 = AXIS2_PLACEMENT_3D('',#64437,#64438,#64439); +#64437 = CARTESIAN_POINT('',(2.895,1.01,0.24)); +#64438 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64439 = DIRECTION('',(2.5E-16,-7.8E-16,-1.)); +#64440 = ADVANCED_FACE('',(#64441),#64447,.F.); +#64441 = FACE_BOUND('',#64442,.F.); +#64442 = EDGE_LOOP('',(#64443,#64444,#64445,#64446)); +#64443 = ORIENTED_EDGE('',*,*,#64273,.T.); +#64444 = ORIENTED_EDGE('',*,*,#64428,.T.); +#64445 = ORIENTED_EDGE('',*,*,#64221,.T.); +#64446 = ORIENTED_EDGE('',*,*,#64247,.T.); +#64447 = PLANE('',#64448); +#64448 = AXIS2_PLACEMENT_3D('',#64449,#64450,#64451); +#64449 = CARTESIAN_POINT('',(2.835,0.87,0.38)); +#64450 = DIRECTION('',(1.09E-15,1.,-1.03E-15)); +#64451 = DIRECTION('',(1.,-1.09E-15,4.348495553653E-47)); +#64452 = MANIFOLD_SOLID_BREP('',#64453); +#64453 = CLOSED_SHELL('',(#64454,#64494,#64575,#64600,#64624,#64690, + #64707,#64724,#64741,#64758,#64775,#64792)); +#64454 = ADVANCED_FACE('',(#64455),#64489,.F.); +#64455 = FACE_BOUND('',#64456,.T.); +#64456 = EDGE_LOOP('',(#64457,#64467,#64475,#64483)); +#64457 = ORIENTED_EDGE('',*,*,#64458,.F.); +#64458 = EDGE_CURVE('',#64459,#64461,#64463,.T.); +#64459 = VERTEX_POINT('',#64460); +#64460 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64461 = VERTEX_POINT('',#64462); +#64462 = CARTESIAN_POINT('',(3.562132034356,0.3,-5.E-02)); +#64463 = LINE('',#64464,#64465); +#64464 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64465 = VECTOR('',#64466,1.); +#64466 = DIRECTION('',(-1.,-0.,-0.)); +#64467 = ORIENTED_EDGE('',*,*,#64468,.T.); +#64468 = EDGE_CURVE('',#64459,#64469,#64471,.T.); +#64469 = VERTEX_POINT('',#64470); +#64470 = CARTESIAN_POINT('',(4.,-0.3,-5.E-02)); +#64471 = LINE('',#64472,#64473); +#64472 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64473 = VECTOR('',#64474,1.); +#64474 = DIRECTION('',(0.,-1.,2.2E-16)); +#64475 = ORIENTED_EDGE('',*,*,#64476,.T.); +#64476 = EDGE_CURVE('',#64469,#64477,#64479,.T.); +#64477 = VERTEX_POINT('',#64478); +#64478 = CARTESIAN_POINT('',(3.562132034356,-0.3,-5.E-02)); +#64479 = LINE('',#64480,#64481); +#64480 = CARTESIAN_POINT('',(4.,-0.3,-5.E-02)); +#64481 = VECTOR('',#64482,1.); +#64482 = DIRECTION('',(-1.,-0.,-0.)); +#64483 = ORIENTED_EDGE('',*,*,#64484,.F.); +#64484 = EDGE_CURVE('',#64461,#64477,#64485,.T.); +#64485 = LINE('',#64486,#64487); +#64486 = CARTESIAN_POINT('',(3.562132034356,0.3,-5.E-02)); +#64487 = VECTOR('',#64488,1.); +#64488 = DIRECTION('',(0.,-1.,2.2E-16)); +#64489 = PLANE('',#64490); +#64490 = AXIS2_PLACEMENT_3D('',#64491,#64492,#64493); +#64491 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64492 = DIRECTION('',(0.,2.2E-16,1.)); +#64493 = DIRECTION('',(1.,0.,-0.)); +#64494 = ADVANCED_FACE('',(#64495),#64570,.T.); +#64495 = FACE_BOUND('',#64496,.F.); +#64496 = EDGE_LOOP('',(#64497,#64498,#64506,#64514,#64522,#64531,#64539, + #64547,#64555,#64563)); +#64497 = ORIENTED_EDGE('',*,*,#64458,.F.); +#64498 = ORIENTED_EDGE('',*,*,#64499,.F.); +#64499 = EDGE_CURVE('',#64500,#64459,#64502,.T.); +#64500 = VERTEX_POINT('',#64501); +#64501 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64502 = LINE('',#64503,#64504); +#64503 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64504 = VECTOR('',#64505,1.); +#64505 = DIRECTION('',(0.,2.2E-16,-1.)); +#64506 = ORIENTED_EDGE('',*,*,#64507,.T.); +#64507 = EDGE_CURVE('',#64500,#64508,#64510,.T.); +#64508 = VERTEX_POINT('',#64509); +#64509 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64510 = LINE('',#64511,#64512); +#64511 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64512 = VECTOR('',#64513,1.); +#64513 = DIRECTION('',(-1.,-0.,-0.)); +#64514 = ORIENTED_EDGE('',*,*,#64515,.T.); +#64515 = EDGE_CURVE('',#64508,#64516,#64518,.T.); +#64516 = VERTEX_POINT('',#64517); +#64517 = CARTESIAN_POINT('',(3.273933982822,0.3,0.456066017178)); +#64518 = LINE('',#64519,#64520); +#64519 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64520 = VECTOR('',#64521,1.); +#64521 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64522 = ORIENTED_EDGE('',*,*,#64523,.F.); +#64523 = EDGE_CURVE('',#64524,#64516,#64526,.T.); +#64524 = VERTEX_POINT('',#64525); +#64525 = CARTESIAN_POINT('',(3.167867965644,0.3,0.5)); +#64526 = CIRCLE('',#64527,0.15); +#64527 = AXIS2_PLACEMENT_3D('',#64528,#64529,#64530); +#64528 = CARTESIAN_POINT('',(3.167867965644,0.3,0.35)); +#64529 = DIRECTION('',(0.,1.,-2.2E-16)); +#64530 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64531 = ORIENTED_EDGE('',*,*,#64532,.T.); +#64532 = EDGE_CURVE('',#64524,#64533,#64535,.T.); +#64533 = VERTEX_POINT('',#64534); +#64534 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64535 = LINE('',#64536,#64537); +#64536 = CARTESIAN_POINT('',(3.23,0.3,0.5)); +#64537 = VECTOR('',#64538,1.); +#64538 = DIRECTION('',(-1.,-0.,-0.)); +#64539 = ORIENTED_EDGE('',*,*,#64540,.T.); +#64540 = EDGE_CURVE('',#64533,#64541,#64543,.T.); +#64541 = VERTEX_POINT('',#64542); +#64542 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64543 = LINE('',#64544,#64545); +#64544 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64545 = VECTOR('',#64546,1.); +#64546 = DIRECTION('',(0.,2.2E-16,-1.)); +#64547 = ORIENTED_EDGE('',*,*,#64548,.T.); +#64548 = EDGE_CURVE('',#64541,#64549,#64551,.T.); +#64549 = VERTEX_POINT('',#64550); +#64550 = CARTESIAN_POINT('',(3.15,0.3,0.3)); +#64551 = LINE('',#64552,#64553); +#64552 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64553 = VECTOR('',#64554,1.); +#64554 = DIRECTION('',(1.,0.,0.)); +#64555 = ORIENTED_EDGE('',*,*,#64556,.F.); +#64556 = EDGE_CURVE('',#64557,#64549,#64559,.T.); +#64557 = VERTEX_POINT('',#64558); +#64558 = CARTESIAN_POINT('',(3.456066017178,0.3,-6.066017177982E-03)); +#64559 = LINE('',#64560,#64561); +#64560 = CARTESIAN_POINT('',(3.5,0.3,-5.E-02)); +#64561 = VECTOR('',#64562,1.); +#64562 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64563 = ORIENTED_EDGE('',*,*,#64564,.F.); +#64564 = EDGE_CURVE('',#64461,#64557,#64565,.T.); +#64565 = CIRCLE('',#64566,0.15); +#64566 = AXIS2_PLACEMENT_3D('',#64567,#64568,#64569); +#64567 = CARTESIAN_POINT('',(3.562132034356,0.3,0.1)); +#64568 = DIRECTION('',(0.,1.,-2.2E-16)); +#64569 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64570 = PLANE('',#64571); +#64571 = AXIS2_PLACEMENT_3D('',#64572,#64573,#64574); +#64572 = CARTESIAN_POINT('',(3.507087712869,0.3,0.181755913475)); +#64573 = DIRECTION('',(0.,1.,0.)); +#64574 = DIRECTION('',(0.,0.,-1.)); +#64575 = ADVANCED_FACE('',(#64576),#64595,.T.); +#64576 = FACE_BOUND('',#64577,.T.); +#64577 = EDGE_LOOP('',(#64578,#64579,#64588,#64594)); +#64578 = ORIENTED_EDGE('',*,*,#64484,.T.); +#64579 = ORIENTED_EDGE('',*,*,#64580,.T.); +#64580 = EDGE_CURVE('',#64477,#64581,#64583,.T.); +#64581 = VERTEX_POINT('',#64582); +#64582 = CARTESIAN_POINT('',(3.456066017178,-0.3,-6.066017177982E-03)); +#64583 = CIRCLE('',#64584,0.15); +#64584 = AXIS2_PLACEMENT_3D('',#64585,#64586,#64587); +#64585 = CARTESIAN_POINT('',(3.562132034356,-0.3,0.1)); +#64586 = DIRECTION('',(0.,1.,-2.2E-16)); +#64587 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64588 = ORIENTED_EDGE('',*,*,#64589,.F.); +#64589 = EDGE_CURVE('',#64557,#64581,#64590,.T.); +#64590 = LINE('',#64591,#64592); +#64591 = CARTESIAN_POINT('',(3.456066017178,0.3,-6.066017177982E-03)); +#64592 = VECTOR('',#64593,1.); +#64593 = DIRECTION('',(0.,-1.,2.2E-16)); +#64594 = ORIENTED_EDGE('',*,*,#64564,.F.); +#64595 = CYLINDRICAL_SURFACE('',#64596,0.15); +#64596 = AXIS2_PLACEMENT_3D('',#64597,#64598,#64599); +#64597 = CARTESIAN_POINT('',(3.562132034356,0.3,0.1)); +#64598 = DIRECTION('',(0.,-1.,2.2E-16)); +#64599 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#64600 = ADVANCED_FACE('',(#64601),#64619,.F.); +#64601 = FACE_BOUND('',#64602,.T.); +#64602 = EDGE_LOOP('',(#64603,#64611,#64617,#64618)); +#64603 = ORIENTED_EDGE('',*,*,#64604,.T.); +#64604 = EDGE_CURVE('',#64500,#64605,#64607,.T.); +#64605 = VERTEX_POINT('',#64606); +#64606 = CARTESIAN_POINT('',(4.,-0.3,0.15)); +#64607 = LINE('',#64608,#64609); +#64608 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64609 = VECTOR('',#64610,1.); +#64610 = DIRECTION('',(0.,-1.,2.2E-16)); +#64611 = ORIENTED_EDGE('',*,*,#64612,.T.); +#64612 = EDGE_CURVE('',#64605,#64469,#64613,.T.); +#64613 = LINE('',#64614,#64615); +#64614 = CARTESIAN_POINT('',(4.,-0.3,0.15)); +#64615 = VECTOR('',#64616,1.); +#64616 = DIRECTION('',(0.,2.2E-16,-1.)); +#64617 = ORIENTED_EDGE('',*,*,#64468,.F.); +#64618 = ORIENTED_EDGE('',*,*,#64499,.F.); +#64619 = PLANE('',#64620); +#64620 = AXIS2_PLACEMENT_3D('',#64621,#64622,#64623); +#64621 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64622 = DIRECTION('',(-1.,-0.,-0.)); +#64623 = DIRECTION('',(-0.,2.2E-16,1.)); +#64624 = ADVANCED_FACE('',(#64625),#64685,.F.); +#64625 = FACE_BOUND('',#64626,.T.); +#64626 = EDGE_LOOP('',(#64627,#64628,#64629,#64637,#64645,#64654,#64662, + #64670,#64678,#64684)); +#64627 = ORIENTED_EDGE('',*,*,#64476,.F.); +#64628 = ORIENTED_EDGE('',*,*,#64612,.F.); +#64629 = ORIENTED_EDGE('',*,*,#64630,.T.); +#64630 = EDGE_CURVE('',#64605,#64631,#64633,.T.); +#64631 = VERTEX_POINT('',#64632); +#64632 = CARTESIAN_POINT('',(3.58,-0.3,0.15)); +#64633 = LINE('',#64634,#64635); +#64634 = CARTESIAN_POINT('',(4.,-0.3,0.15)); +#64635 = VECTOR('',#64636,1.); +#64636 = DIRECTION('',(-1.,-0.,-0.)); +#64637 = ORIENTED_EDGE('',*,*,#64638,.T.); +#64638 = EDGE_CURVE('',#64631,#64639,#64641,.T.); +#64639 = VERTEX_POINT('',#64640); +#64640 = CARTESIAN_POINT('',(3.273933982822,-0.3,0.456066017178)); +#64641 = LINE('',#64642,#64643); +#64642 = CARTESIAN_POINT('',(3.58,-0.3,0.15)); +#64643 = VECTOR('',#64644,1.); +#64644 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64645 = ORIENTED_EDGE('',*,*,#64646,.F.); +#64646 = EDGE_CURVE('',#64647,#64639,#64649,.T.); +#64647 = VERTEX_POINT('',#64648); +#64648 = CARTESIAN_POINT('',(3.167867965644,-0.3,0.5)); +#64649 = CIRCLE('',#64650,0.15); +#64650 = AXIS2_PLACEMENT_3D('',#64651,#64652,#64653); +#64651 = CARTESIAN_POINT('',(3.167867965644,-0.3,0.35)); +#64652 = DIRECTION('',(0.,1.,-2.2E-16)); +#64653 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64654 = ORIENTED_EDGE('',*,*,#64655,.T.); +#64655 = EDGE_CURVE('',#64647,#64656,#64658,.T.); +#64656 = VERTEX_POINT('',#64657); +#64657 = CARTESIAN_POINT('',(3.05,-0.3,0.5)); +#64658 = LINE('',#64659,#64660); +#64659 = CARTESIAN_POINT('',(3.23,-0.3,0.5)); +#64660 = VECTOR('',#64661,1.); +#64661 = DIRECTION('',(-1.,-0.,-0.)); +#64662 = ORIENTED_EDGE('',*,*,#64663,.T.); +#64663 = EDGE_CURVE('',#64656,#64664,#64666,.T.); +#64664 = VERTEX_POINT('',#64665); +#64665 = CARTESIAN_POINT('',(3.05,-0.3,0.3)); +#64666 = LINE('',#64667,#64668); +#64667 = CARTESIAN_POINT('',(3.05,-0.3,0.5)); +#64668 = VECTOR('',#64669,1.); +#64669 = DIRECTION('',(0.,2.2E-16,-1.)); +#64670 = ORIENTED_EDGE('',*,*,#64671,.T.); +#64671 = EDGE_CURVE('',#64664,#64672,#64674,.T.); +#64672 = VERTEX_POINT('',#64673); +#64673 = CARTESIAN_POINT('',(3.15,-0.3,0.3)); +#64674 = LINE('',#64675,#64676); +#64675 = CARTESIAN_POINT('',(3.05,-0.3,0.3)); +#64676 = VECTOR('',#64677,1.); +#64677 = DIRECTION('',(1.,0.,0.)); +#64678 = ORIENTED_EDGE('',*,*,#64679,.F.); +#64679 = EDGE_CURVE('',#64581,#64672,#64680,.T.); +#64680 = LINE('',#64681,#64682); +#64681 = CARTESIAN_POINT('',(3.5,-0.3,-5.E-02)); +#64682 = VECTOR('',#64683,1.); +#64683 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64684 = ORIENTED_EDGE('',*,*,#64580,.F.); +#64685 = PLANE('',#64686); +#64686 = AXIS2_PLACEMENT_3D('',#64687,#64688,#64689); +#64687 = CARTESIAN_POINT('',(3.507087712869,-0.3,0.181755913475)); +#64688 = DIRECTION('',(0.,1.,0.)); +#64689 = DIRECTION('',(0.,0.,-1.)); +#64690 = ADVANCED_FACE('',(#64691),#64702,.F.); +#64691 = FACE_BOUND('',#64692,.T.); +#64692 = EDGE_LOOP('',(#64693,#64694,#64695,#64696)); +#64693 = ORIENTED_EDGE('',*,*,#64556,.F.); +#64694 = ORIENTED_EDGE('',*,*,#64589,.T.); +#64695 = ORIENTED_EDGE('',*,*,#64679,.T.); +#64696 = ORIENTED_EDGE('',*,*,#64697,.F.); +#64697 = EDGE_CURVE('',#64549,#64672,#64698,.T.); +#64698 = LINE('',#64699,#64700); +#64699 = CARTESIAN_POINT('',(3.15,0.3,0.3)); +#64700 = VECTOR('',#64701,1.); +#64701 = DIRECTION('',(0.,-1.,2.2E-16)); +#64702 = PLANE('',#64703); +#64703 = AXIS2_PLACEMENT_3D('',#64704,#64705,#64706); +#64704 = CARTESIAN_POINT('',(3.5,0.3,-5.E-02)); +#64705 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#64706 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#64707 = ADVANCED_FACE('',(#64708),#64719,.T.); +#64708 = FACE_BOUND('',#64709,.F.); +#64709 = EDGE_LOOP('',(#64710,#64711,#64712,#64718)); +#64710 = ORIENTED_EDGE('',*,*,#64604,.T.); +#64711 = ORIENTED_EDGE('',*,*,#64630,.T.); +#64712 = ORIENTED_EDGE('',*,*,#64713,.F.); +#64713 = EDGE_CURVE('',#64508,#64631,#64714,.T.); +#64714 = LINE('',#64715,#64716); +#64715 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64716 = VECTOR('',#64717,1.); +#64717 = DIRECTION('',(0.,-1.,2.2E-16)); +#64718 = ORIENTED_EDGE('',*,*,#64507,.F.); +#64719 = PLANE('',#64720); +#64720 = AXIS2_PLACEMENT_3D('',#64721,#64722,#64723); +#64721 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64722 = DIRECTION('',(0.,2.2E-16,1.)); +#64723 = DIRECTION('',(1.,0.,-0.)); +#64724 = ADVANCED_FACE('',(#64725),#64736,.T.); +#64725 = FACE_BOUND('',#64726,.F.); +#64726 = EDGE_LOOP('',(#64727,#64733,#64734,#64735)); +#64727 = ORIENTED_EDGE('',*,*,#64728,.T.); +#64728 = EDGE_CURVE('',#64541,#64664,#64729,.T.); +#64729 = LINE('',#64730,#64731); +#64730 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64731 = VECTOR('',#64732,1.); +#64732 = DIRECTION('',(0.,-1.,2.2E-16)); +#64733 = ORIENTED_EDGE('',*,*,#64671,.T.); +#64734 = ORIENTED_EDGE('',*,*,#64697,.F.); +#64735 = ORIENTED_EDGE('',*,*,#64548,.F.); +#64736 = PLANE('',#64737); +#64737 = AXIS2_PLACEMENT_3D('',#64738,#64739,#64740); +#64738 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64739 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#64740 = DIRECTION('',(-1.,0.,0.)); +#64741 = ADVANCED_FACE('',(#64742),#64753,.T.); +#64742 = FACE_BOUND('',#64743,.F.); +#64743 = EDGE_LOOP('',(#64744,#64745,#64746,#64747)); +#64744 = ORIENTED_EDGE('',*,*,#64515,.F.); +#64745 = ORIENTED_EDGE('',*,*,#64713,.T.); +#64746 = ORIENTED_EDGE('',*,*,#64638,.T.); +#64747 = ORIENTED_EDGE('',*,*,#64748,.F.); +#64748 = EDGE_CURVE('',#64516,#64639,#64749,.T.); +#64749 = LINE('',#64750,#64751); +#64750 = CARTESIAN_POINT('',(3.273933982822,0.3,0.456066017178)); +#64751 = VECTOR('',#64752,1.); +#64752 = DIRECTION('',(0.,-1.,2.2E-16)); +#64753 = PLANE('',#64754); +#64754 = AXIS2_PLACEMENT_3D('',#64755,#64756,#64757); +#64755 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64756 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#64757 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#64758 = ADVANCED_FACE('',(#64759),#64770,.T.); +#64759 = FACE_BOUND('',#64760,.F.); +#64760 = EDGE_LOOP('',(#64761,#64767,#64768,#64769)); +#64761 = ORIENTED_EDGE('',*,*,#64762,.T.); +#64762 = EDGE_CURVE('',#64533,#64656,#64763,.T.); +#64763 = LINE('',#64764,#64765); +#64764 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64765 = VECTOR('',#64766,1.); +#64766 = DIRECTION('',(0.,-1.,2.2E-16)); +#64767 = ORIENTED_EDGE('',*,*,#64663,.T.); +#64768 = ORIENTED_EDGE('',*,*,#64728,.F.); +#64769 = ORIENTED_EDGE('',*,*,#64540,.F.); +#64770 = PLANE('',#64771); +#64771 = AXIS2_PLACEMENT_3D('',#64772,#64773,#64774); +#64772 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64773 = DIRECTION('',(-1.,-0.,-0.)); +#64774 = DIRECTION('',(-0.,2.2E-16,1.)); +#64775 = ADVANCED_FACE('',(#64776),#64787,.T.); +#64776 = FACE_BOUND('',#64777,.T.); +#64777 = EDGE_LOOP('',(#64778,#64784,#64785,#64786)); +#64778 = ORIENTED_EDGE('',*,*,#64779,.T.); +#64779 = EDGE_CURVE('',#64524,#64647,#64780,.T.); +#64780 = LINE('',#64781,#64782); +#64781 = CARTESIAN_POINT('',(3.167867965644,0.3,0.5)); +#64782 = VECTOR('',#64783,1.); +#64783 = DIRECTION('',(0.,-1.,2.2E-16)); +#64784 = ORIENTED_EDGE('',*,*,#64646,.T.); +#64785 = ORIENTED_EDGE('',*,*,#64748,.F.); +#64786 = ORIENTED_EDGE('',*,*,#64523,.F.); +#64787 = CYLINDRICAL_SURFACE('',#64788,0.15); +#64788 = AXIS2_PLACEMENT_3D('',#64789,#64790,#64791); +#64789 = CARTESIAN_POINT('',(3.167867965644,0.3,0.35)); +#64790 = DIRECTION('',(0.,-1.,2.2E-16)); +#64791 = DIRECTION('',(0.,2.2E-16,1.)); +#64792 = ADVANCED_FACE('',(#64793),#64799,.T.); +#64793 = FACE_BOUND('',#64794,.F.); +#64794 = EDGE_LOOP('',(#64795,#64796,#64797,#64798)); +#64795 = ORIENTED_EDGE('',*,*,#64532,.F.); +#64796 = ORIENTED_EDGE('',*,*,#64779,.T.); +#64797 = ORIENTED_EDGE('',*,*,#64655,.T.); +#64798 = ORIENTED_EDGE('',*,*,#64762,.F.); +#64799 = PLANE('',#64800); +#64800 = AXIS2_PLACEMENT_3D('',#64801,#64802,#64803); +#64801 = CARTESIAN_POINT('',(3.23,0.3,0.5)); +#64802 = DIRECTION('',(0.,2.2E-16,1.)); +#64803 = DIRECTION('',(1.,0.,-0.)); +#64804 = MANIFOLD_SOLID_BREP('',#64805); +#64805 = CLOSED_SHELL('',(#64806,#64846,#64913,#64938,#64963,#64996, + #65020,#65044,#65069,#65094,#65111,#65128,#65145,#65176,#65194, + #65212,#65229,#65246)); +#64806 = ADVANCED_FACE('',(#64807),#64841,.T.); +#64807 = FACE_BOUND('',#64808,.T.); +#64808 = EDGE_LOOP('',(#64809,#64819,#64827,#64835)); +#64809 = ORIENTED_EDGE('',*,*,#64810,.F.); +#64810 = EDGE_CURVE('',#64811,#64813,#64815,.T.); +#64811 = VERTEX_POINT('',#64812); +#64812 = CARTESIAN_POINT('',(-1.25,0.65,1.)); +#64813 = VERTEX_POINT('',#64814); +#64814 = CARTESIAN_POINT('',(1.25,0.65,1.)); +#64815 = LINE('',#64816,#64817); +#64816 = CARTESIAN_POINT('',(-1.35,0.65,1.)); +#64817 = VECTOR('',#64818,1.); +#64818 = DIRECTION('',(1.,0.,0.)); +#64819 = ORIENTED_EDGE('',*,*,#64820,.T.); +#64820 = EDGE_CURVE('',#64811,#64821,#64823,.T.); +#64821 = VERTEX_POINT('',#64822); +#64822 = CARTESIAN_POINT('',(-1.25,0.65,2.4)); +#64823 = LINE('',#64824,#64825); +#64824 = CARTESIAN_POINT('',(-1.25,0.65,1.)); +#64825 = VECTOR('',#64826,1.); +#64826 = DIRECTION('',(0.,0.,1.)); +#64827 = ORIENTED_EDGE('',*,*,#64828,.T.); +#64828 = EDGE_CURVE('',#64821,#64829,#64831,.T.); +#64829 = VERTEX_POINT('',#64830); +#64830 = CARTESIAN_POINT('',(1.25,0.65,2.4)); +#64831 = LINE('',#64832,#64833); +#64832 = CARTESIAN_POINT('',(-1.35,0.65,2.4)); +#64833 = VECTOR('',#64834,1.); +#64834 = DIRECTION('',(1.,0.,0.)); +#64835 = ORIENTED_EDGE('',*,*,#64836,.F.); +#64836 = EDGE_CURVE('',#64813,#64829,#64837,.T.); +#64837 = LINE('',#64838,#64839); +#64838 = CARTESIAN_POINT('',(1.25,0.65,1.)); +#64839 = VECTOR('',#64840,1.); +#64840 = DIRECTION('',(0.,0.,1.)); +#64841 = PLANE('',#64842); +#64842 = AXIS2_PLACEMENT_3D('',#64843,#64844,#64845); +#64843 = CARTESIAN_POINT('',(-1.35,0.65,1.)); +#64844 = DIRECTION('',(0.,1.,0.)); +#64845 = DIRECTION('',(1.,0.,0.)); +#64846 = ADVANCED_FACE('',(#64847),#64908,.F.); +#64847 = FACE_BOUND('',#64848,.F.); +#64848 = EDGE_LOOP('',(#64849,#64850,#64859,#64867,#64876,#64884,#64893, + #64901)); +#64849 = ORIENTED_EDGE('',*,*,#64810,.F.); +#64850 = ORIENTED_EDGE('',*,*,#64851,.T.); +#64851 = EDGE_CURVE('',#64811,#64852,#64854,.T.); +#64852 = VERTEX_POINT('',#64853); +#64853 = CARTESIAN_POINT('',(-1.35,0.55,1.)); +#64854 = CIRCLE('',#64855,0.1); +#64855 = AXIS2_PLACEMENT_3D('',#64856,#64857,#64858); +#64856 = CARTESIAN_POINT('',(-1.25,0.55,1.)); +#64857 = DIRECTION('',(-0.,0.,1.)); +#64858 = DIRECTION('',(0.,-1.,0.)); +#64859 = ORIENTED_EDGE('',*,*,#64860,.F.); +#64860 = EDGE_CURVE('',#64861,#64852,#64863,.T.); +#64861 = VERTEX_POINT('',#64862); +#64862 = CARTESIAN_POINT('',(-1.35,-0.55,1.)); +#64863 = LINE('',#64864,#64865); +#64864 = CARTESIAN_POINT('',(-1.35,-0.65,1.)); +#64865 = VECTOR('',#64866,1.); +#64866 = DIRECTION('',(0.,1.,0.)); +#64867 = ORIENTED_EDGE('',*,*,#64868,.F.); +#64868 = EDGE_CURVE('',#64869,#64861,#64871,.T.); +#64869 = VERTEX_POINT('',#64870); +#64870 = CARTESIAN_POINT('',(-1.25,-0.65,1.)); +#64871 = CIRCLE('',#64872,0.1); +#64872 = AXIS2_PLACEMENT_3D('',#64873,#64874,#64875); +#64873 = CARTESIAN_POINT('',(-1.25,-0.55,1.)); +#64874 = DIRECTION('',(-0.,-0.,-1.)); +#64875 = DIRECTION('',(0.,-1.,0.)); +#64876 = ORIENTED_EDGE('',*,*,#64877,.F.); +#64877 = EDGE_CURVE('',#64878,#64869,#64880,.T.); +#64878 = VERTEX_POINT('',#64879); +#64879 = CARTESIAN_POINT('',(1.25,-0.65,1.)); +#64880 = LINE('',#64881,#64882); +#64881 = CARTESIAN_POINT('',(1.35,-0.65,1.)); +#64882 = VECTOR('',#64883,1.); +#64883 = DIRECTION('',(-1.,0.,0.)); +#64884 = ORIENTED_EDGE('',*,*,#64885,.F.); +#64885 = EDGE_CURVE('',#64886,#64878,#64888,.T.); +#64886 = VERTEX_POINT('',#64887); +#64887 = CARTESIAN_POINT('',(1.35,-0.55,1.)); +#64888 = CIRCLE('',#64889,0.1); +#64889 = AXIS2_PLACEMENT_3D('',#64890,#64891,#64892); +#64890 = CARTESIAN_POINT('',(1.25,-0.55,1.)); +#64891 = DIRECTION('',(-0.,-0.,-1.)); +#64892 = DIRECTION('',(0.,-1.,0.)); +#64893 = ORIENTED_EDGE('',*,*,#64894,.F.); +#64894 = EDGE_CURVE('',#64895,#64886,#64897,.T.); +#64895 = VERTEX_POINT('',#64896); +#64896 = CARTESIAN_POINT('',(1.35,0.55,1.)); +#64897 = LINE('',#64898,#64899); +#64898 = CARTESIAN_POINT('',(1.35,0.65,1.)); +#64899 = VECTOR('',#64900,1.); +#64900 = DIRECTION('',(0.,-1.,0.)); +#64901 = ORIENTED_EDGE('',*,*,#64902,.F.); +#64902 = EDGE_CURVE('',#64813,#64895,#64903,.T.); +#64903 = CIRCLE('',#64904,0.1); +#64904 = AXIS2_PLACEMENT_3D('',#64905,#64906,#64907); +#64905 = CARTESIAN_POINT('',(1.25,0.55,1.)); +#64906 = DIRECTION('',(-0.,-0.,-1.)); +#64907 = DIRECTION('',(0.,-1.,0.)); +#64908 = PLANE('',#64909); +#64909 = AXIS2_PLACEMENT_3D('',#64910,#64911,#64912); +#64910 = CARTESIAN_POINT('',(3.E-17,0.,1.)); +#64911 = DIRECTION('',(0.,0.,1.)); +#64912 = DIRECTION('',(1.,0.,-0.)); +#64913 = ADVANCED_FACE('',(#64914),#64933,.T.); +#64914 = FACE_BOUND('',#64915,.T.); +#64915 = EDGE_LOOP('',(#64916,#64917,#64925,#64932)); +#64916 = ORIENTED_EDGE('',*,*,#64851,.T.); +#64917 = ORIENTED_EDGE('',*,*,#64918,.T.); +#64918 = EDGE_CURVE('',#64852,#64919,#64921,.T.); +#64919 = VERTEX_POINT('',#64920); +#64920 = CARTESIAN_POINT('',(-1.35,0.55,2.4)); +#64921 = LINE('',#64922,#64923); +#64922 = CARTESIAN_POINT('',(-1.35,0.55,1.)); +#64923 = VECTOR('',#64924,1.); +#64924 = DIRECTION('',(0.,0.,1.)); +#64925 = ORIENTED_EDGE('',*,*,#64926,.T.); +#64926 = EDGE_CURVE('',#64919,#64821,#64927,.T.); +#64927 = CIRCLE('',#64928,0.1); +#64928 = AXIS2_PLACEMENT_3D('',#64929,#64930,#64931); +#64929 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#64930 = DIRECTION('',(0.,6.E-17,-1.)); +#64931 = DIRECTION('',(0.,1.,6.E-17)); +#64932 = ORIENTED_EDGE('',*,*,#64820,.F.); +#64933 = CYLINDRICAL_SURFACE('',#64934,0.1); +#64934 = AXIS2_PLACEMENT_3D('',#64935,#64936,#64937); +#64935 = CARTESIAN_POINT('',(-1.25,0.55,1.)); +#64936 = DIRECTION('',(0.,0.,1.)); +#64937 = DIRECTION('',(0.,1.,0.)); +#64938 = ADVANCED_FACE('',(#64939),#64958,.T.); +#64939 = FACE_BOUND('',#64940,.T.); +#64940 = EDGE_LOOP('',(#64941,#64942,#64951,#64957)); +#64941 = ORIENTED_EDGE('',*,*,#64836,.T.); +#64942 = ORIENTED_EDGE('',*,*,#64943,.T.); +#64943 = EDGE_CURVE('',#64829,#64944,#64946,.T.); +#64944 = VERTEX_POINT('',#64945); +#64945 = CARTESIAN_POINT('',(1.35,0.55,2.4)); +#64946 = CIRCLE('',#64947,0.1); +#64947 = AXIS2_PLACEMENT_3D('',#64948,#64949,#64950); +#64948 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#64949 = DIRECTION('',(0.,0.,-1.)); +#64950 = DIRECTION('',(0.,1.,0.)); +#64951 = ORIENTED_EDGE('',*,*,#64952,.F.); +#64952 = EDGE_CURVE('',#64895,#64944,#64953,.T.); +#64953 = LINE('',#64954,#64955); +#64954 = CARTESIAN_POINT('',(1.35,0.55,1.)); +#64955 = VECTOR('',#64956,1.); +#64956 = DIRECTION('',(0.,0.,1.)); +#64957 = ORIENTED_EDGE('',*,*,#64902,.F.); +#64958 = CYLINDRICAL_SURFACE('',#64959,0.1); +#64959 = AXIS2_PLACEMENT_3D('',#64960,#64961,#64962); +#64960 = CARTESIAN_POINT('',(1.25,0.55,1.)); +#64961 = DIRECTION('',(0.,0.,1.)); +#64962 = DIRECTION('',(0.,1.,0.)); +#64963 = ADVANCED_FACE('',(#64964),#64991,.T.); +#64964 = FACE_BOUND('',#64965,.T.); +#64965 = EDGE_LOOP('',(#64966,#64967,#64976,#64984)); +#64966 = ORIENTED_EDGE('',*,*,#64828,.F.); +#64967 = ORIENTED_EDGE('',*,*,#64968,.F.); +#64968 = EDGE_CURVE('',#64969,#64821,#64971,.T.); +#64969 = VERTEX_POINT('',#64970); +#64970 = CARTESIAN_POINT('',(-1.25,0.55,2.5)); +#64971 = CIRCLE('',#64972,0.1); +#64972 = AXIS2_PLACEMENT_3D('',#64973,#64974,#64975); +#64973 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#64974 = DIRECTION('',(-1.,0.,0.)); +#64975 = DIRECTION('',(0.,-1.11E-15,1.)); +#64976 = ORIENTED_EDGE('',*,*,#64977,.T.); +#64977 = EDGE_CURVE('',#64969,#64978,#64980,.T.); +#64978 = VERTEX_POINT('',#64979); +#64979 = CARTESIAN_POINT('',(1.25,0.55,2.5)); +#64980 = LINE('',#64981,#64982); +#64981 = CARTESIAN_POINT('',(-1.35,0.55,2.5)); +#64982 = VECTOR('',#64983,1.); +#64983 = DIRECTION('',(1.,0.,0.)); +#64984 = ORIENTED_EDGE('',*,*,#64985,.T.); +#64985 = EDGE_CURVE('',#64978,#64829,#64986,.T.); +#64986 = CIRCLE('',#64987,0.1); +#64987 = AXIS2_PLACEMENT_3D('',#64988,#64989,#64990); +#64988 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#64989 = DIRECTION('',(-1.,0.,0.)); +#64990 = DIRECTION('',(0.,1.,0.)); +#64991 = CYLINDRICAL_SURFACE('',#64992,0.1); +#64992 = AXIS2_PLACEMENT_3D('',#64993,#64994,#64995); +#64993 = CARTESIAN_POINT('',(-1.35,0.55,2.4)); +#64994 = DIRECTION('',(1.,0.,0.)); +#64995 = DIRECTION('',(-0.,1.,0.)); +#64996 = ADVANCED_FACE('',(#64997),#65015,.T.); +#64997 = FACE_BOUND('',#64998,.T.); +#64998 = EDGE_LOOP('',(#64999,#65000,#65008,#65014)); +#64999 = ORIENTED_EDGE('',*,*,#64860,.F.); +#65000 = ORIENTED_EDGE('',*,*,#65001,.T.); +#65001 = EDGE_CURVE('',#64861,#65002,#65004,.T.); +#65002 = VERTEX_POINT('',#65003); +#65003 = CARTESIAN_POINT('',(-1.35,-0.55,2.4)); +#65004 = LINE('',#65005,#65006); +#65005 = CARTESIAN_POINT('',(-1.35,-0.55,1.)); +#65006 = VECTOR('',#65007,1.); +#65007 = DIRECTION('',(0.,0.,1.)); +#65008 = ORIENTED_EDGE('',*,*,#65009,.T.); +#65009 = EDGE_CURVE('',#65002,#64919,#65010,.T.); +#65010 = LINE('',#65011,#65012); +#65011 = CARTESIAN_POINT('',(-1.35,-0.65,2.4)); +#65012 = VECTOR('',#65013,1.); +#65013 = DIRECTION('',(0.,1.,0.)); +#65014 = ORIENTED_EDGE('',*,*,#64918,.F.); +#65015 = PLANE('',#65016); +#65016 = AXIS2_PLACEMENT_3D('',#65017,#65018,#65019); +#65017 = CARTESIAN_POINT('',(-1.35,-0.65,1.)); +#65018 = DIRECTION('',(-1.,0.,0.)); +#65019 = DIRECTION('',(0.,1.,0.)); +#65020 = ADVANCED_FACE('',(#65021),#65039,.T.); +#65021 = FACE_BOUND('',#65022,.T.); +#65022 = EDGE_LOOP('',(#65023,#65024,#65025,#65033)); +#65023 = ORIENTED_EDGE('',*,*,#64894,.F.); +#65024 = ORIENTED_EDGE('',*,*,#64952,.T.); +#65025 = ORIENTED_EDGE('',*,*,#65026,.T.); +#65026 = EDGE_CURVE('',#64944,#65027,#65029,.T.); +#65027 = VERTEX_POINT('',#65028); +#65028 = CARTESIAN_POINT('',(1.35,-0.55,2.4)); +#65029 = LINE('',#65030,#65031); +#65030 = CARTESIAN_POINT('',(1.35,0.65,2.4)); +#65031 = VECTOR('',#65032,1.); +#65032 = DIRECTION('',(0.,-1.,0.)); +#65033 = ORIENTED_EDGE('',*,*,#65034,.F.); +#65034 = EDGE_CURVE('',#64886,#65027,#65035,.T.); +#65035 = LINE('',#65036,#65037); +#65036 = CARTESIAN_POINT('',(1.35,-0.55,1.)); +#65037 = VECTOR('',#65038,1.); +#65038 = DIRECTION('',(0.,0.,1.)); +#65039 = PLANE('',#65040); +#65040 = AXIS2_PLACEMENT_3D('',#65041,#65042,#65043); +#65041 = CARTESIAN_POINT('',(1.35,0.65,1.)); +#65042 = DIRECTION('',(1.,0.,0.)); +#65043 = DIRECTION('',(0.,-1.,0.)); +#65044 = ADVANCED_FACE('',(#65045),#65064,.T.); +#65045 = FACE_BOUND('',#65046,.T.); +#65046 = EDGE_LOOP('',(#65047,#65055,#65062,#65063)); +#65047 = ORIENTED_EDGE('',*,*,#65048,.T.); +#65048 = EDGE_CURVE('',#64869,#65049,#65051,.T.); +#65049 = VERTEX_POINT('',#65050); +#65050 = CARTESIAN_POINT('',(-1.25,-0.65,2.4)); +#65051 = LINE('',#65052,#65053); +#65052 = CARTESIAN_POINT('',(-1.25,-0.65,1.)); +#65053 = VECTOR('',#65054,1.); +#65054 = DIRECTION('',(0.,0.,1.)); +#65055 = ORIENTED_EDGE('',*,*,#65056,.T.); +#65056 = EDGE_CURVE('',#65049,#65002,#65057,.T.); +#65057 = CIRCLE('',#65058,0.1); +#65058 = AXIS2_PLACEMENT_3D('',#65059,#65060,#65061); +#65059 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65060 = DIRECTION('',(-0.,-0.,-1.)); +#65061 = DIRECTION('',(0.,-1.,0.)); +#65062 = ORIENTED_EDGE('',*,*,#65001,.F.); +#65063 = ORIENTED_EDGE('',*,*,#64868,.F.); +#65064 = CYLINDRICAL_SURFACE('',#65065,0.1); +#65065 = AXIS2_PLACEMENT_3D('',#65066,#65067,#65068); +#65066 = CARTESIAN_POINT('',(-1.25,-0.55,1.)); +#65067 = DIRECTION('',(0.,0.,1.)); +#65068 = DIRECTION('',(0.,-1.,0.)); +#65069 = ADVANCED_FACE('',(#65070),#65089,.T.); +#65070 = FACE_BOUND('',#65071,.T.); +#65071 = EDGE_LOOP('',(#65072,#65073,#65082,#65088)); +#65072 = ORIENTED_EDGE('',*,*,#65034,.T.); +#65073 = ORIENTED_EDGE('',*,*,#65074,.T.); +#65074 = EDGE_CURVE('',#65027,#65075,#65077,.T.); +#65075 = VERTEX_POINT('',#65076); +#65076 = CARTESIAN_POINT('',(1.25,-0.65,2.4)); +#65077 = CIRCLE('',#65078,0.1); +#65078 = AXIS2_PLACEMENT_3D('',#65079,#65080,#65081); +#65079 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65080 = DIRECTION('',(0.,0.,-1.)); +#65081 = DIRECTION('',(0.,-1.,0.)); +#65082 = ORIENTED_EDGE('',*,*,#65083,.F.); +#65083 = EDGE_CURVE('',#64878,#65075,#65084,.T.); +#65084 = LINE('',#65085,#65086); +#65085 = CARTESIAN_POINT('',(1.25,-0.65,1.)); +#65086 = VECTOR('',#65087,1.); +#65087 = DIRECTION('',(0.,0.,1.)); +#65088 = ORIENTED_EDGE('',*,*,#64885,.F.); +#65089 = CYLINDRICAL_SURFACE('',#65090,0.1); +#65090 = AXIS2_PLACEMENT_3D('',#65091,#65092,#65093); +#65091 = CARTESIAN_POINT('',(1.25,-0.55,1.)); +#65092 = DIRECTION('',(0.,0.,1.)); +#65093 = DIRECTION('',(1.,0.,-0.)); +#65094 = ADVANCED_FACE('',(#65095),#65106,.T.); +#65095 = FACE_BOUND('',#65096,.T.); +#65096 = EDGE_LOOP('',(#65097,#65098,#65099,#65105)); +#65097 = ORIENTED_EDGE('',*,*,#64877,.F.); +#65098 = ORIENTED_EDGE('',*,*,#65083,.T.); +#65099 = ORIENTED_EDGE('',*,*,#65100,.T.); +#65100 = EDGE_CURVE('',#65075,#65049,#65101,.T.); +#65101 = LINE('',#65102,#65103); +#65102 = CARTESIAN_POINT('',(1.35,-0.65,2.4)); +#65103 = VECTOR('',#65104,1.); +#65104 = DIRECTION('',(-1.,0.,0.)); +#65105 = ORIENTED_EDGE('',*,*,#65048,.F.); +#65106 = PLANE('',#65107); +#65107 = AXIS2_PLACEMENT_3D('',#65108,#65109,#65110); +#65108 = CARTESIAN_POINT('',(1.35,-0.65,1.)); +#65109 = DIRECTION('',(0.,-1.,0.)); +#65110 = DIRECTION('',(-1.,0.,0.)); +#65111 = ADVANCED_FACE('',(#65112),#65123,.T.); +#65112 = FACE_BOUND('',#65113,.T.); +#65113 = EDGE_LOOP('',(#65114,#65115,#65116)); +#65114 = ORIENTED_EDGE('',*,*,#64968,.T.); +#65115 = ORIENTED_EDGE('',*,*,#64926,.F.); +#65116 = ORIENTED_EDGE('',*,*,#65117,.T.); +#65117 = EDGE_CURVE('',#64919,#64969,#65118,.T.); +#65118 = CIRCLE('',#65119,0.1); +#65119 = AXIS2_PLACEMENT_3D('',#65120,#65121,#65122); +#65120 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#65121 = DIRECTION('',(-0.,1.,1.11E-15)); +#65122 = DIRECTION('',(0.,-1.11E-15,1.)); +#65123 = SPHERICAL_SURFACE('',#65124,0.1); +#65124 = AXIS2_PLACEMENT_3D('',#65125,#65126,#65127); +#65125 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#65126 = DIRECTION('',(1.,0.,0.)); +#65127 = DIRECTION('',(0.,-1.11E-15,1.)); +#65128 = ADVANCED_FACE('',(#65129),#65140,.T.); +#65129 = FACE_BOUND('',#65130,.T.); +#65130 = EDGE_LOOP('',(#65131,#65132,#65139)); +#65131 = ORIENTED_EDGE('',*,*,#64985,.F.); +#65132 = ORIENTED_EDGE('',*,*,#65133,.T.); +#65133 = EDGE_CURVE('',#64978,#64944,#65134,.T.); +#65134 = CIRCLE('',#65135,0.1); +#65135 = AXIS2_PLACEMENT_3D('',#65136,#65137,#65138); +#65136 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#65137 = DIRECTION('',(-6.E-17,1.,0.)); +#65138 = DIRECTION('',(1.,6.E-17,0.)); +#65139 = ORIENTED_EDGE('',*,*,#64943,.F.); +#65140 = SPHERICAL_SURFACE('',#65141,0.1); +#65141 = AXIS2_PLACEMENT_3D('',#65142,#65143,#65144); +#65142 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#65143 = DIRECTION('',(-0.,-0.,-1.)); +#65144 = DIRECTION('',(0.,1.,-0.)); +#65145 = ADVANCED_FACE('',(#65146),#65171,.T.); +#65146 = FACE_BOUND('',#65147,.T.); +#65147 = EDGE_LOOP('',(#65148,#65158,#65164,#65165)); +#65148 = ORIENTED_EDGE('',*,*,#65149,.F.); +#65149 = EDGE_CURVE('',#65150,#65152,#65154,.T.); +#65150 = VERTEX_POINT('',#65151); +#65151 = CARTESIAN_POINT('',(1.25,-0.55,2.5)); +#65152 = VERTEX_POINT('',#65153); +#65153 = CARTESIAN_POINT('',(-1.25,-0.55,2.5)); +#65154 = LINE('',#65155,#65156); +#65155 = CARTESIAN_POINT('',(1.35,-0.55,2.5)); +#65156 = VECTOR('',#65157,1.); +#65157 = DIRECTION('',(-1.,0.,0.)); +#65158 = ORIENTED_EDGE('',*,*,#65159,.F.); +#65159 = EDGE_CURVE('',#64978,#65150,#65160,.T.); +#65160 = LINE('',#65161,#65162); +#65161 = CARTESIAN_POINT('',(1.25,0.65,2.5)); +#65162 = VECTOR('',#65163,1.); +#65163 = DIRECTION('',(0.,-1.,0.)); +#65164 = ORIENTED_EDGE('',*,*,#64977,.F.); +#65165 = ORIENTED_EDGE('',*,*,#65166,.F.); +#65166 = EDGE_CURVE('',#65152,#64969,#65167,.T.); +#65167 = LINE('',#65168,#65169); +#65168 = CARTESIAN_POINT('',(-1.25,-0.65,2.5)); +#65169 = VECTOR('',#65170,1.); +#65170 = DIRECTION('',(0.,1.,0.)); +#65171 = PLANE('',#65172); +#65172 = AXIS2_PLACEMENT_3D('',#65173,#65174,#65175); +#65173 = CARTESIAN_POINT('',(3.E-17,0.,2.5)); +#65174 = DIRECTION('',(0.,0.,1.)); +#65175 = DIRECTION('',(1.,0.,-0.)); +#65176 = ADVANCED_FACE('',(#65177),#65189,.T.); +#65177 = FACE_BOUND('',#65178,.T.); +#65178 = EDGE_LOOP('',(#65179,#65186,#65187,#65188)); +#65179 = ORIENTED_EDGE('',*,*,#65180,.F.); +#65180 = EDGE_CURVE('',#65152,#65002,#65181,.T.); +#65181 = CIRCLE('',#65182,0.1); +#65182 = AXIS2_PLACEMENT_3D('',#65183,#65184,#65185); +#65183 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65184 = DIRECTION('',(6.E-17,-1.,0.)); +#65185 = DIRECTION('',(-1.,-6.E-17,0.)); +#65186 = ORIENTED_EDGE('',*,*,#65166,.T.); +#65187 = ORIENTED_EDGE('',*,*,#65117,.F.); +#65188 = ORIENTED_EDGE('',*,*,#65009,.F.); +#65189 = CYLINDRICAL_SURFACE('',#65190,0.1); +#65190 = AXIS2_PLACEMENT_3D('',#65191,#65192,#65193); +#65191 = CARTESIAN_POINT('',(-1.25,-0.65,2.4)); +#65192 = DIRECTION('',(0.,1.,0.)); +#65193 = DIRECTION('',(-1.,0.,0.)); +#65194 = ADVANCED_FACE('',(#65195),#65207,.T.); +#65195 = FACE_BOUND('',#65196,.T.); +#65196 = EDGE_LOOP('',(#65197,#65198,#65199,#65206)); +#65197 = ORIENTED_EDGE('',*,*,#65133,.F.); +#65198 = ORIENTED_EDGE('',*,*,#65159,.T.); +#65199 = ORIENTED_EDGE('',*,*,#65200,.F.); +#65200 = EDGE_CURVE('',#65027,#65150,#65201,.T.); +#65201 = CIRCLE('',#65202,0.1); +#65202 = AXIS2_PLACEMENT_3D('',#65203,#65204,#65205); +#65203 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65204 = DIRECTION('',(-0.,-1.,-6.E-17)); +#65205 = DIRECTION('',(0.,-6.E-17,1.)); +#65206 = ORIENTED_EDGE('',*,*,#65026,.F.); +#65207 = CYLINDRICAL_SURFACE('',#65208,0.1); +#65208 = AXIS2_PLACEMENT_3D('',#65209,#65210,#65211); +#65209 = CARTESIAN_POINT('',(1.25,0.65,2.4)); +#65210 = DIRECTION('',(0.,-1.,0.)); +#65211 = DIRECTION('',(1.,0.,0.)); +#65212 = ADVANCED_FACE('',(#65213),#65224,.T.); +#65213 = FACE_BOUND('',#65214,.T.); +#65214 = EDGE_LOOP('',(#65215,#65222,#65223)); +#65215 = ORIENTED_EDGE('',*,*,#65216,.F.); +#65216 = EDGE_CURVE('',#65152,#65049,#65217,.T.); +#65217 = CIRCLE('',#65218,0.1); +#65218 = AXIS2_PLACEMENT_3D('',#65219,#65220,#65221); +#65219 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65220 = DIRECTION('',(1.,0.,0.)); +#65221 = DIRECTION('',(0.,-1.,0.)); +#65222 = ORIENTED_EDGE('',*,*,#65180,.T.); +#65223 = ORIENTED_EDGE('',*,*,#65056,.F.); +#65224 = SPHERICAL_SURFACE('',#65225,0.1); +#65225 = AXIS2_PLACEMENT_3D('',#65226,#65227,#65228); +#65226 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65227 = DIRECTION('',(-0.,-0.,-1.)); +#65228 = DIRECTION('',(0.,-1.,0.)); +#65229 = ADVANCED_FACE('',(#65230),#65241,.T.); +#65230 = FACE_BOUND('',#65231,.T.); +#65231 = EDGE_LOOP('',(#65232,#65233,#65234)); +#65232 = ORIENTED_EDGE('',*,*,#65074,.F.); +#65233 = ORIENTED_EDGE('',*,*,#65200,.T.); +#65234 = ORIENTED_EDGE('',*,*,#65235,.F.); +#65235 = EDGE_CURVE('',#65075,#65150,#65236,.T.); +#65236 = CIRCLE('',#65237,0.1); +#65237 = AXIS2_PLACEMENT_3D('',#65238,#65239,#65240); +#65238 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65239 = DIRECTION('',(-1.,0.,0.)); +#65240 = DIRECTION('',(0.,-1.,0.)); +#65241 = SPHERICAL_SURFACE('',#65242,0.1); +#65242 = AXIS2_PLACEMENT_3D('',#65243,#65244,#65245); +#65243 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65244 = DIRECTION('',(-1.,-0.,-0.)); +#65245 = DIRECTION('',(0.,-1.,0.)); +#65246 = ADVANCED_FACE('',(#65247),#65253,.T.); +#65247 = FACE_BOUND('',#65248,.T.); +#65248 = EDGE_LOOP('',(#65249,#65250,#65251,#65252)); +#65249 = ORIENTED_EDGE('',*,*,#65100,.F.); +#65250 = ORIENTED_EDGE('',*,*,#65235,.T.); +#65251 = ORIENTED_EDGE('',*,*,#65149,.T.); +#65252 = ORIENTED_EDGE('',*,*,#65216,.T.); +#65253 = CYLINDRICAL_SURFACE('',#65254,0.1); +#65254 = AXIS2_PLACEMENT_3D('',#65255,#65256,#65257); +#65255 = CARTESIAN_POINT('',(1.35,-0.55,2.4)); +#65256 = DIRECTION('',(-1.,0.,0.)); +#65257 = DIRECTION('',(0.,-1.,0.)); +#65258 = MANIFOLD_SOLID_BREP('',#65259); +#65259 = CLOSED_SHELL('',(#65260,#65300,#65381,#65406,#65430,#65496, + #65513,#65530,#65547,#65564,#65581,#65598)); +#65260 = ADVANCED_FACE('',(#65261),#65295,.F.); +#65261 = FACE_BOUND('',#65262,.F.); +#65262 = EDGE_LOOP('',(#65263,#65273,#65281,#65289)); +#65263 = ORIENTED_EDGE('',*,*,#65264,.F.); +#65264 = EDGE_CURVE('',#65265,#65267,#65269,.T.); +#65265 = VERTEX_POINT('',#65266); +#65266 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65267 = VERTEX_POINT('',#65268); +#65268 = CARTESIAN_POINT('',(-3.562132034356,0.3,-5.E-02)); +#65269 = LINE('',#65270,#65271); +#65270 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65271 = VECTOR('',#65272,1.); +#65272 = DIRECTION('',(1.,0.,0.)); +#65273 = ORIENTED_EDGE('',*,*,#65274,.T.); +#65274 = EDGE_CURVE('',#65265,#65275,#65277,.T.); +#65275 = VERTEX_POINT('',#65276); +#65276 = CARTESIAN_POINT('',(-4.,-0.3,-5.E-02)); +#65277 = LINE('',#65278,#65279); +#65278 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65279 = VECTOR('',#65280,1.); +#65280 = DIRECTION('',(0.,-1.,2.2E-16)); +#65281 = ORIENTED_EDGE('',*,*,#65282,.T.); +#65282 = EDGE_CURVE('',#65275,#65283,#65285,.T.); +#65283 = VERTEX_POINT('',#65284); +#65284 = CARTESIAN_POINT('',(-3.562132034356,-0.3,-5.E-02)); +#65285 = LINE('',#65286,#65287); +#65286 = CARTESIAN_POINT('',(-4.,-0.3,-5.E-02)); +#65287 = VECTOR('',#65288,1.); +#65288 = DIRECTION('',(1.,0.,0.)); +#65289 = ORIENTED_EDGE('',*,*,#65290,.F.); +#65290 = EDGE_CURVE('',#65267,#65283,#65291,.T.); +#65291 = LINE('',#65292,#65293); +#65292 = CARTESIAN_POINT('',(-3.562132034356,0.3,-5.E-02)); +#65293 = VECTOR('',#65294,1.); +#65294 = DIRECTION('',(0.,-1.,2.2E-16)); +#65295 = PLANE('',#65296); +#65296 = AXIS2_PLACEMENT_3D('',#65297,#65298,#65299); +#65297 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65298 = DIRECTION('',(0.,2.2E-16,1.)); +#65299 = DIRECTION('',(1.,0.,-0.)); +#65300 = ADVANCED_FACE('',(#65301),#65376,.T.); +#65301 = FACE_BOUND('',#65302,.T.); +#65302 = EDGE_LOOP('',(#65303,#65304,#65312,#65320,#65328,#65337,#65345, + #65353,#65361,#65369)); +#65303 = ORIENTED_EDGE('',*,*,#65264,.F.); +#65304 = ORIENTED_EDGE('',*,*,#65305,.F.); +#65305 = EDGE_CURVE('',#65306,#65265,#65308,.T.); +#65306 = VERTEX_POINT('',#65307); +#65307 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65308 = LINE('',#65309,#65310); +#65309 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65310 = VECTOR('',#65311,1.); +#65311 = DIRECTION('',(0.,2.2E-16,-1.)); +#65312 = ORIENTED_EDGE('',*,*,#65313,.T.); +#65313 = EDGE_CURVE('',#65306,#65314,#65316,.T.); +#65314 = VERTEX_POINT('',#65315); +#65315 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65316 = LINE('',#65317,#65318); +#65317 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65318 = VECTOR('',#65319,1.); +#65319 = DIRECTION('',(1.,0.,0.)); +#65320 = ORIENTED_EDGE('',*,*,#65321,.T.); +#65321 = EDGE_CURVE('',#65314,#65322,#65324,.T.); +#65322 = VERTEX_POINT('',#65323); +#65323 = CARTESIAN_POINT('',(-3.273933982822,0.3,0.456066017178)); +#65324 = LINE('',#65325,#65326); +#65325 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65326 = VECTOR('',#65327,1.); +#65327 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65328 = ORIENTED_EDGE('',*,*,#65329,.F.); +#65329 = EDGE_CURVE('',#65330,#65322,#65332,.T.); +#65330 = VERTEX_POINT('',#65331); +#65331 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.5)); +#65332 = CIRCLE('',#65333,0.15); +#65333 = AXIS2_PLACEMENT_3D('',#65334,#65335,#65336); +#65334 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.35)); +#65335 = DIRECTION('',(0.,-1.,2.2E-16)); +#65336 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65337 = ORIENTED_EDGE('',*,*,#65338,.T.); +#65338 = EDGE_CURVE('',#65330,#65339,#65341,.T.); +#65339 = VERTEX_POINT('',#65340); +#65340 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65341 = LINE('',#65342,#65343); +#65342 = CARTESIAN_POINT('',(-3.23,0.3,0.5)); +#65343 = VECTOR('',#65344,1.); +#65344 = DIRECTION('',(1.,0.,0.)); +#65345 = ORIENTED_EDGE('',*,*,#65346,.T.); +#65346 = EDGE_CURVE('',#65339,#65347,#65349,.T.); +#65347 = VERTEX_POINT('',#65348); +#65348 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65349 = LINE('',#65350,#65351); +#65350 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65351 = VECTOR('',#65352,1.); +#65352 = DIRECTION('',(0.,2.2E-16,-1.)); +#65353 = ORIENTED_EDGE('',*,*,#65354,.T.); +#65354 = EDGE_CURVE('',#65347,#65355,#65357,.T.); +#65355 = VERTEX_POINT('',#65356); +#65356 = CARTESIAN_POINT('',(-3.15,0.3,0.3)); +#65357 = LINE('',#65358,#65359); +#65358 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65359 = VECTOR('',#65360,1.); +#65360 = DIRECTION('',(-1.,0.,0.)); +#65361 = ORIENTED_EDGE('',*,*,#65362,.F.); +#65362 = EDGE_CURVE('',#65363,#65355,#65365,.T.); +#65363 = VERTEX_POINT('',#65364); +#65364 = CARTESIAN_POINT('',(-3.456066017178,0.3,-6.066017177982E-03)); +#65365 = LINE('',#65366,#65367); +#65366 = CARTESIAN_POINT('',(-3.5,0.3,-5.E-02)); +#65367 = VECTOR('',#65368,1.); +#65368 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65369 = ORIENTED_EDGE('',*,*,#65370,.F.); +#65370 = EDGE_CURVE('',#65267,#65363,#65371,.T.); +#65371 = CIRCLE('',#65372,0.15); +#65372 = AXIS2_PLACEMENT_3D('',#65373,#65374,#65375); +#65373 = CARTESIAN_POINT('',(-3.562132034356,0.3,0.1)); +#65374 = DIRECTION('',(0.,-1.,2.2E-16)); +#65375 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65376 = PLANE('',#65377); +#65377 = AXIS2_PLACEMENT_3D('',#65378,#65379,#65380); +#65378 = CARTESIAN_POINT('',(-3.507087712869,0.3,0.181755913475)); +#65379 = DIRECTION('',(0.,1.,0.)); +#65380 = DIRECTION('',(0.,-0.,1.)); +#65381 = ADVANCED_FACE('',(#65382),#65401,.T.); +#65382 = FACE_BOUND('',#65383,.T.); +#65383 = EDGE_LOOP('',(#65384,#65385,#65393,#65400)); +#65384 = ORIENTED_EDGE('',*,*,#65370,.T.); +#65385 = ORIENTED_EDGE('',*,*,#65386,.T.); +#65386 = EDGE_CURVE('',#65363,#65387,#65389,.T.); +#65387 = VERTEX_POINT('',#65388); +#65388 = CARTESIAN_POINT('',(-3.456066017178,-0.3,-6.066017177982E-03)); +#65389 = LINE('',#65390,#65391); +#65390 = CARTESIAN_POINT('',(-3.456066017178,0.3,-6.066017177982E-03)); +#65391 = VECTOR('',#65392,1.); +#65392 = DIRECTION('',(0.,-1.,2.2E-16)); +#65393 = ORIENTED_EDGE('',*,*,#65394,.F.); +#65394 = EDGE_CURVE('',#65283,#65387,#65395,.T.); +#65395 = CIRCLE('',#65396,0.15); +#65396 = AXIS2_PLACEMENT_3D('',#65397,#65398,#65399); +#65397 = CARTESIAN_POINT('',(-3.562132034356,-0.3,0.1)); +#65398 = DIRECTION('',(0.,-1.,2.2E-16)); +#65399 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65400 = ORIENTED_EDGE('',*,*,#65290,.F.); +#65401 = CYLINDRICAL_SURFACE('',#65402,0.15); +#65402 = AXIS2_PLACEMENT_3D('',#65403,#65404,#65405); +#65403 = CARTESIAN_POINT('',(-3.562132034356,0.3,0.1)); +#65404 = DIRECTION('',(0.,-1.,2.2E-16)); +#65405 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65406 = ADVANCED_FACE('',(#65407),#65425,.F.); +#65407 = FACE_BOUND('',#65408,.F.); +#65408 = EDGE_LOOP('',(#65409,#65417,#65423,#65424)); +#65409 = ORIENTED_EDGE('',*,*,#65410,.T.); +#65410 = EDGE_CURVE('',#65306,#65411,#65413,.T.); +#65411 = VERTEX_POINT('',#65412); +#65412 = CARTESIAN_POINT('',(-4.,-0.3,0.15)); +#65413 = LINE('',#65414,#65415); +#65414 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65415 = VECTOR('',#65416,1.); +#65416 = DIRECTION('',(0.,-1.,2.2E-16)); +#65417 = ORIENTED_EDGE('',*,*,#65418,.T.); +#65418 = EDGE_CURVE('',#65411,#65275,#65419,.T.); +#65419 = LINE('',#65420,#65421); +#65420 = CARTESIAN_POINT('',(-4.,-0.3,0.15)); +#65421 = VECTOR('',#65422,1.); +#65422 = DIRECTION('',(0.,2.2E-16,-1.)); +#65423 = ORIENTED_EDGE('',*,*,#65274,.F.); +#65424 = ORIENTED_EDGE('',*,*,#65305,.F.); +#65425 = PLANE('',#65426); +#65426 = AXIS2_PLACEMENT_3D('',#65427,#65428,#65429); +#65427 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65428 = DIRECTION('',(1.,0.,0.)); +#65429 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65430 = ADVANCED_FACE('',(#65431),#65491,.F.); +#65431 = FACE_BOUND('',#65432,.F.); +#65432 = EDGE_LOOP('',(#65433,#65434,#65435,#65443,#65451,#65460,#65468, + #65476,#65484,#65490)); +#65433 = ORIENTED_EDGE('',*,*,#65282,.F.); +#65434 = ORIENTED_EDGE('',*,*,#65418,.F.); +#65435 = ORIENTED_EDGE('',*,*,#65436,.T.); +#65436 = EDGE_CURVE('',#65411,#65437,#65439,.T.); +#65437 = VERTEX_POINT('',#65438); +#65438 = CARTESIAN_POINT('',(-3.58,-0.3,0.15)); +#65439 = LINE('',#65440,#65441); +#65440 = CARTESIAN_POINT('',(-4.,-0.3,0.15)); +#65441 = VECTOR('',#65442,1.); +#65442 = DIRECTION('',(1.,0.,0.)); +#65443 = ORIENTED_EDGE('',*,*,#65444,.T.); +#65444 = EDGE_CURVE('',#65437,#65445,#65447,.T.); +#65445 = VERTEX_POINT('',#65446); +#65446 = CARTESIAN_POINT('',(-3.273933982822,-0.3,0.456066017178)); +#65447 = LINE('',#65448,#65449); +#65448 = CARTESIAN_POINT('',(-3.58,-0.3,0.15)); +#65449 = VECTOR('',#65450,1.); +#65450 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65451 = ORIENTED_EDGE('',*,*,#65452,.F.); +#65452 = EDGE_CURVE('',#65453,#65445,#65455,.T.); +#65453 = VERTEX_POINT('',#65454); +#65454 = CARTESIAN_POINT('',(-3.167867965644,-0.3,0.5)); +#65455 = CIRCLE('',#65456,0.15); +#65456 = AXIS2_PLACEMENT_3D('',#65457,#65458,#65459); +#65457 = CARTESIAN_POINT('',(-3.167867965644,-0.3,0.35)); +#65458 = DIRECTION('',(0.,-1.,2.2E-16)); +#65459 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65460 = ORIENTED_EDGE('',*,*,#65461,.T.); +#65461 = EDGE_CURVE('',#65453,#65462,#65464,.T.); +#65462 = VERTEX_POINT('',#65463); +#65463 = CARTESIAN_POINT('',(-3.05,-0.3,0.5)); +#65464 = LINE('',#65465,#65466); +#65465 = CARTESIAN_POINT('',(-3.23,-0.3,0.5)); +#65466 = VECTOR('',#65467,1.); +#65467 = DIRECTION('',(1.,0.,0.)); +#65468 = ORIENTED_EDGE('',*,*,#65469,.T.); +#65469 = EDGE_CURVE('',#65462,#65470,#65472,.T.); +#65470 = VERTEX_POINT('',#65471); +#65471 = CARTESIAN_POINT('',(-3.05,-0.3,0.3)); +#65472 = LINE('',#65473,#65474); +#65473 = CARTESIAN_POINT('',(-3.05,-0.3,0.5)); +#65474 = VECTOR('',#65475,1.); +#65475 = DIRECTION('',(0.,2.2E-16,-1.)); +#65476 = ORIENTED_EDGE('',*,*,#65477,.T.); +#65477 = EDGE_CURVE('',#65470,#65478,#65480,.T.); +#65478 = VERTEX_POINT('',#65479); +#65479 = CARTESIAN_POINT('',(-3.15,-0.3,0.3)); +#65480 = LINE('',#65481,#65482); +#65481 = CARTESIAN_POINT('',(-3.05,-0.3,0.3)); +#65482 = VECTOR('',#65483,1.); +#65483 = DIRECTION('',(-1.,0.,0.)); +#65484 = ORIENTED_EDGE('',*,*,#65485,.F.); +#65485 = EDGE_CURVE('',#65387,#65478,#65486,.T.); +#65486 = LINE('',#65487,#65488); +#65487 = CARTESIAN_POINT('',(-3.5,-0.3,-5.E-02)); +#65488 = VECTOR('',#65489,1.); +#65489 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65490 = ORIENTED_EDGE('',*,*,#65394,.F.); +#65491 = PLANE('',#65492); +#65492 = AXIS2_PLACEMENT_3D('',#65493,#65494,#65495); +#65493 = CARTESIAN_POINT('',(-3.507087712869,-0.3,0.181755913475)); +#65494 = DIRECTION('',(0.,1.,0.)); +#65495 = DIRECTION('',(0.,-0.,1.)); +#65496 = ADVANCED_FACE('',(#65497),#65508,.F.); +#65497 = FACE_BOUND('',#65498,.F.); +#65498 = EDGE_LOOP('',(#65499,#65500,#65501,#65502)); +#65499 = ORIENTED_EDGE('',*,*,#65362,.F.); +#65500 = ORIENTED_EDGE('',*,*,#65386,.T.); +#65501 = ORIENTED_EDGE('',*,*,#65485,.T.); +#65502 = ORIENTED_EDGE('',*,*,#65503,.F.); +#65503 = EDGE_CURVE('',#65355,#65478,#65504,.T.); +#65504 = LINE('',#65505,#65506); +#65505 = CARTESIAN_POINT('',(-3.15,0.3,0.3)); +#65506 = VECTOR('',#65507,1.); +#65507 = DIRECTION('',(0.,-1.,2.2E-16)); +#65508 = PLANE('',#65509); +#65509 = AXIS2_PLACEMENT_3D('',#65510,#65511,#65512); +#65510 = CARTESIAN_POINT('',(-3.5,0.3,-5.E-02)); +#65511 = DIRECTION('',(-0.707106781187,1.599999999999E-16,0.707106781187 + )); +#65512 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#65513 = ADVANCED_FACE('',(#65514),#65525,.T.); +#65514 = FACE_BOUND('',#65515,.T.); +#65515 = EDGE_LOOP('',(#65516,#65517,#65518,#65524)); +#65516 = ORIENTED_EDGE('',*,*,#65410,.T.); +#65517 = ORIENTED_EDGE('',*,*,#65436,.T.); +#65518 = ORIENTED_EDGE('',*,*,#65519,.F.); +#65519 = EDGE_CURVE('',#65314,#65437,#65520,.T.); +#65520 = LINE('',#65521,#65522); +#65521 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65522 = VECTOR('',#65523,1.); +#65523 = DIRECTION('',(0.,-1.,2.2E-16)); +#65524 = ORIENTED_EDGE('',*,*,#65313,.F.); +#65525 = PLANE('',#65526); +#65526 = AXIS2_PLACEMENT_3D('',#65527,#65528,#65529); +#65527 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65528 = DIRECTION('',(0.,2.2E-16,1.)); +#65529 = DIRECTION('',(1.,0.,-0.)); +#65530 = ADVANCED_FACE('',(#65531),#65542,.T.); +#65531 = FACE_BOUND('',#65532,.T.); +#65532 = EDGE_LOOP('',(#65533,#65539,#65540,#65541)); +#65533 = ORIENTED_EDGE('',*,*,#65534,.T.); +#65534 = EDGE_CURVE('',#65347,#65470,#65535,.T.); +#65535 = LINE('',#65536,#65537); +#65536 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65537 = VECTOR('',#65538,1.); +#65538 = DIRECTION('',(0.,-1.,2.2E-16)); +#65539 = ORIENTED_EDGE('',*,*,#65477,.T.); +#65540 = ORIENTED_EDGE('',*,*,#65503,.F.); +#65541 = ORIENTED_EDGE('',*,*,#65354,.F.); +#65542 = PLANE('',#65543); +#65543 = AXIS2_PLACEMENT_3D('',#65544,#65545,#65546); +#65544 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65545 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65546 = DIRECTION('',(-1.,-0.,0.)); +#65547 = ADVANCED_FACE('',(#65548),#65559,.T.); +#65548 = FACE_BOUND('',#65549,.T.); +#65549 = EDGE_LOOP('',(#65550,#65551,#65552,#65553)); +#65550 = ORIENTED_EDGE('',*,*,#65321,.F.); +#65551 = ORIENTED_EDGE('',*,*,#65519,.T.); +#65552 = ORIENTED_EDGE('',*,*,#65444,.T.); +#65553 = ORIENTED_EDGE('',*,*,#65554,.F.); +#65554 = EDGE_CURVE('',#65322,#65445,#65555,.T.); +#65555 = LINE('',#65556,#65557); +#65556 = CARTESIAN_POINT('',(-3.273933982822,0.3,0.456066017178)); +#65557 = VECTOR('',#65558,1.); +#65558 = DIRECTION('',(0.,-1.,2.2E-16)); +#65559 = PLANE('',#65560); +#65560 = AXIS2_PLACEMENT_3D('',#65561,#65562,#65563); +#65561 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65562 = DIRECTION('',(-0.707106781187,1.599999999999E-16,0.707106781187 + )); +#65563 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#65564 = ADVANCED_FACE('',(#65565),#65576,.T.); +#65565 = FACE_BOUND('',#65566,.T.); +#65566 = EDGE_LOOP('',(#65567,#65573,#65574,#65575)); +#65567 = ORIENTED_EDGE('',*,*,#65568,.T.); +#65568 = EDGE_CURVE('',#65339,#65462,#65569,.T.); +#65569 = LINE('',#65570,#65571); +#65570 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65571 = VECTOR('',#65572,1.); +#65572 = DIRECTION('',(0.,-1.,2.2E-16)); +#65573 = ORIENTED_EDGE('',*,*,#65469,.T.); +#65574 = ORIENTED_EDGE('',*,*,#65534,.F.); +#65575 = ORIENTED_EDGE('',*,*,#65346,.F.); +#65576 = PLANE('',#65577); +#65577 = AXIS2_PLACEMENT_3D('',#65578,#65579,#65580); +#65578 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65579 = DIRECTION('',(1.,0.,0.)); +#65580 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65581 = ADVANCED_FACE('',(#65582),#65593,.T.); +#65582 = FACE_BOUND('',#65583,.T.); +#65583 = EDGE_LOOP('',(#65584,#65585,#65586,#65587)); +#65584 = ORIENTED_EDGE('',*,*,#65329,.T.); +#65585 = ORIENTED_EDGE('',*,*,#65554,.T.); +#65586 = ORIENTED_EDGE('',*,*,#65452,.F.); +#65587 = ORIENTED_EDGE('',*,*,#65588,.F.); +#65588 = EDGE_CURVE('',#65330,#65453,#65589,.T.); +#65589 = LINE('',#65590,#65591); +#65590 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.5)); +#65591 = VECTOR('',#65592,1.); +#65592 = DIRECTION('',(0.,-1.,2.2E-16)); +#65593 = CYLINDRICAL_SURFACE('',#65594,0.15); +#65594 = AXIS2_PLACEMENT_3D('',#65595,#65596,#65597); +#65595 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.35)); +#65596 = DIRECTION('',(0.,-1.,2.2E-16)); +#65597 = DIRECTION('',(0.,2.2E-16,1.)); +#65598 = ADVANCED_FACE('',(#65599),#65605,.T.); +#65599 = FACE_BOUND('',#65600,.T.); +#65600 = EDGE_LOOP('',(#65601,#65602,#65603,#65604)); +#65601 = ORIENTED_EDGE('',*,*,#65338,.F.); +#65602 = ORIENTED_EDGE('',*,*,#65588,.T.); +#65603 = ORIENTED_EDGE('',*,*,#65461,.T.); +#65604 = ORIENTED_EDGE('',*,*,#65568,.F.); +#65605 = PLANE('',#65606); +#65606 = AXIS2_PLACEMENT_3D('',#65607,#65608,#65609); +#65607 = CARTESIAN_POINT('',(-3.23,0.3,0.5)); +#65608 = DIRECTION('',(0.,2.2E-16,1.)); +#65609 = DIRECTION('',(1.,0.,-0.)); +#65610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65614)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#65611,#65612,#65613)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#65611 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#65612 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#65613 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#65614 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-04),#65611, + 'distance_accuracy_value','confusion accuracy'); +#65615 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65616,#65618); +#65616 = ( REPRESENTATION_RELATIONSHIP('','',#58709,#58686) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65617) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65617 = ITEM_DEFINED_TRANSFORMATION('','',#11,#58687); +#65618 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65619); +#65619 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('64','=>[0:1:1:37]','',#58681, + #58704,$); +#65620 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#58706)); +#65621 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65622,#65624); +#65622 = ( REPRESENTATION_RELATIONSHIP('','',#43616,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65623) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65623 = ITEM_DEFINED_TRANSFORMATION('','',#11,#203); +#65624 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65625); +#65625 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('66','J8','',#5,#43611,$); +#65626 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65627,#65629); +#65627 = ( REPRESENTATION_RELATIONSHIP('','',#15643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65628) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65628 = ITEM_DEFINED_TRANSFORMATION('','',#11,#207); +#65629 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65630); +#65630 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('67','U2','',#5,#15638,$); +#65631 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65632,#65634); +#65632 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65633) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65633 = ITEM_DEFINED_TRANSFORMATION('','',#11,#211); +#65634 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65635); +#65635 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('68','RB4','',#5,#523,$); +#65636 = SHAPE_DEFINITION_REPRESENTATION(#65637,#65643); +#65637 = PRODUCT_DEFINITION_SHAPE('','',#65638); +#65638 = PRODUCT_DEFINITION('design','',#65639,#65642); +#65639 = PRODUCT_DEFINITION_FORMATION('','',#65640); +#65640 = PRODUCT('C_1210_3225Metric','C_1210_3225Metric','',(#65641)); +#65641 = PRODUCT_CONTEXT('',#2,'mechanical'); +#65642 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#65643 = SHAPE_REPRESENTATION('',(#11,#65644),#65648); +#65644 = AXIS2_PLACEMENT_3D('',#65645,#65646,#65647); +#65645 = CARTESIAN_POINT('',(0.,0.,0.)); +#65646 = DIRECTION('',(0.,0.,1.)); +#65647 = DIRECTION('',(1.,0.,-0.)); +#65648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65652)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#65649,#65650,#65651)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#65649 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#65650 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#65651 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#65652 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#65649, + 'distance_accuracy_value','confusion accuracy'); +#65653 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65654,#65656); +#65654 = ( REPRESENTATION_RELATIONSHIP('','',#65643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65655) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65655 = ITEM_DEFINED_TRANSFORMATION('','',#11,#215); +#65656 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65657); +#65657 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('70','C22','',#5,#65638,$); +#65658 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#65640)); +#65659 = SHAPE_DEFINITION_REPRESENTATION(#65660,#65666); +#65660 = PRODUCT_DEFINITION_SHAPE('','',#65661); +#65661 = PRODUCT_DEFINITION('design','',#65662,#65665); +#65662 = PRODUCT_DEFINITION_FORMATION('','',#65663); +#65663 = PRODUCT('C_1210_3225Metric','C_1210_3225Metric','',(#65664)); +#65664 = PRODUCT_CONTEXT('',#2,'mechanical'); +#65665 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#65666 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#65667),#66521); +#65667 = MANIFOLD_SOLID_BREP('',#65668); +#65668 = CLOSED_SHELL('',(#65669,#65745,#65776,#65801,#65826,#65850, + #65874,#65899,#65924,#65941,#66027,#66059,#66083,#66108,#66132, + #66157,#66181,#66206,#66223,#66309,#66340,#66365,#66390,#66414, + #66438,#66463,#66488,#66505)); +#65669 = ADVANCED_FACE('',(#65670),#65740,.F.); +#65670 = FACE_BOUND('',#65671,.F.); +#65671 = EDGE_LOOP('',(#65672,#65682,#65691,#65699,#65708,#65716,#65725, + #65733)); +#65672 = ORIENTED_EDGE('',*,*,#65673,.F.); +#65673 = EDGE_CURVE('',#65674,#65676,#65678,.T.); +#65674 = VERTEX_POINT('',#65675); +#65675 = CARTESIAN_POINT('',(-1.6,-1.25,4.E-02)); +#65676 = VERTEX_POINT('',#65677); +#65677 = CARTESIAN_POINT('',(-1.6,-1.25,2.46)); +#65678 = LINE('',#65679,#65680); +#65679 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65680 = VECTOR('',#65681,1.); +#65681 = DIRECTION('',(0.,0.,1.)); +#65682 = ORIENTED_EDGE('',*,*,#65683,.T.); +#65683 = EDGE_CURVE('',#65674,#65684,#65686,.T.); +#65684 = VERTEX_POINT('',#65685); +#65685 = CARTESIAN_POINT('',(-1.6,-1.21,0.)); +#65686 = CIRCLE('',#65687,4.E-02); +#65687 = AXIS2_PLACEMENT_3D('',#65688,#65689,#65690); +#65688 = CARTESIAN_POINT('',(-1.6,-1.21,4.E-02)); +#65689 = DIRECTION('',(1.,0.,-0.)); +#65690 = DIRECTION('',(0.,0.,1.)); +#65691 = ORIENTED_EDGE('',*,*,#65692,.T.); +#65692 = EDGE_CURVE('',#65684,#65693,#65695,.T.); +#65693 = VERTEX_POINT('',#65694); +#65694 = CARTESIAN_POINT('',(-1.6,1.21,0.)); +#65695 = LINE('',#65696,#65697); +#65696 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65697 = VECTOR('',#65698,1.); +#65698 = DIRECTION('',(0.,1.,0.)); +#65699 = ORIENTED_EDGE('',*,*,#65700,.F.); +#65700 = EDGE_CURVE('',#65701,#65693,#65703,.T.); +#65701 = VERTEX_POINT('',#65702); +#65702 = CARTESIAN_POINT('',(-1.6,1.25,4.E-02)); +#65703 = CIRCLE('',#65704,4.E-02); +#65704 = AXIS2_PLACEMENT_3D('',#65705,#65706,#65707); +#65705 = CARTESIAN_POINT('',(-1.6,1.21,4.E-02)); +#65706 = DIRECTION('',(-1.,0.,0.)); +#65707 = DIRECTION('',(0.,0.,1.)); +#65708 = ORIENTED_EDGE('',*,*,#65709,.T.); +#65709 = EDGE_CURVE('',#65701,#65710,#65712,.T.); +#65710 = VERTEX_POINT('',#65711); +#65711 = CARTESIAN_POINT('',(-1.6,1.25,2.46)); +#65712 = LINE('',#65713,#65714); +#65713 = CARTESIAN_POINT('',(-1.6,1.25,0.)); +#65714 = VECTOR('',#65715,1.); +#65715 = DIRECTION('',(0.,0.,1.)); +#65716 = ORIENTED_EDGE('',*,*,#65717,.T.); +#65717 = EDGE_CURVE('',#65710,#65718,#65720,.T.); +#65718 = VERTEX_POINT('',#65719); +#65719 = CARTESIAN_POINT('',(-1.6,1.21,2.5)); +#65720 = CIRCLE('',#65721,4.E-02); +#65721 = AXIS2_PLACEMENT_3D('',#65722,#65723,#65724); +#65722 = CARTESIAN_POINT('',(-1.6,1.21,2.46)); +#65723 = DIRECTION('',(1.,0.,-0.)); +#65724 = DIRECTION('',(0.,0.,1.)); +#65725 = ORIENTED_EDGE('',*,*,#65726,.F.); +#65726 = EDGE_CURVE('',#65727,#65718,#65729,.T.); +#65727 = VERTEX_POINT('',#65728); +#65728 = CARTESIAN_POINT('',(-1.6,-1.21,2.5)); +#65729 = LINE('',#65730,#65731); +#65730 = CARTESIAN_POINT('',(-1.6,-1.25,2.5)); +#65731 = VECTOR('',#65732,1.); +#65732 = DIRECTION('',(0.,1.,0.)); +#65733 = ORIENTED_EDGE('',*,*,#65734,.F.); +#65734 = EDGE_CURVE('',#65676,#65727,#65735,.T.); +#65735 = CIRCLE('',#65736,4.E-02); +#65736 = AXIS2_PLACEMENT_3D('',#65737,#65738,#65739); +#65737 = CARTESIAN_POINT('',(-1.6,-1.21,2.46)); +#65738 = DIRECTION('',(-1.,0.,0.)); +#65739 = DIRECTION('',(0.,0.,1.)); +#65740 = PLANE('',#65741); +#65741 = AXIS2_PLACEMENT_3D('',#65742,#65743,#65744); +#65742 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65743 = DIRECTION('',(1.,0.,0.)); +#65744 = DIRECTION('',(0.,0.,1.)); +#65745 = ADVANCED_FACE('',(#65746),#65771,.F.); +#65746 = FACE_BOUND('',#65747,.F.); +#65747 = EDGE_LOOP('',(#65748,#65758,#65764,#65765)); +#65748 = ORIENTED_EDGE('',*,*,#65749,.F.); +#65749 = EDGE_CURVE('',#65750,#65752,#65754,.T.); +#65750 = VERTEX_POINT('',#65751); +#65751 = CARTESIAN_POINT('',(-1.2,-1.25,4.E-02)); +#65752 = VERTEX_POINT('',#65753); +#65753 = CARTESIAN_POINT('',(-1.2,-1.25,2.46)); +#65754 = LINE('',#65755,#65756); +#65755 = CARTESIAN_POINT('',(-1.2,-1.25,0.)); +#65756 = VECTOR('',#65757,1.); +#65757 = DIRECTION('',(0.,0.,1.)); +#65758 = ORIENTED_EDGE('',*,*,#65759,.F.); +#65759 = EDGE_CURVE('',#65674,#65750,#65760,.T.); +#65760 = LINE('',#65761,#65762); +#65761 = CARTESIAN_POINT('',(-1.6,-1.25,4.E-02)); +#65762 = VECTOR('',#65763,1.); +#65763 = DIRECTION('',(1.,0.,0.)); +#65764 = ORIENTED_EDGE('',*,*,#65673,.T.); +#65765 = ORIENTED_EDGE('',*,*,#65766,.T.); +#65766 = EDGE_CURVE('',#65676,#65752,#65767,.T.); +#65767 = LINE('',#65768,#65769); +#65768 = CARTESIAN_POINT('',(-1.6,-1.25,2.46)); +#65769 = VECTOR('',#65770,1.); +#65770 = DIRECTION('',(1.,0.,0.)); +#65771 = PLANE('',#65772); +#65772 = AXIS2_PLACEMENT_3D('',#65773,#65774,#65775); +#65773 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65774 = DIRECTION('',(0.,1.,0.)); +#65775 = DIRECTION('',(0.,-0.,1.)); +#65776 = ADVANCED_FACE('',(#65777),#65796,.T.); +#65777 = FACE_BOUND('',#65778,.T.); +#65778 = EDGE_LOOP('',(#65779,#65780,#65788,#65795)); +#65779 = ORIENTED_EDGE('',*,*,#65683,.T.); +#65780 = ORIENTED_EDGE('',*,*,#65781,.T.); +#65781 = EDGE_CURVE('',#65684,#65782,#65784,.T.); +#65782 = VERTEX_POINT('',#65783); +#65783 = CARTESIAN_POINT('',(-1.2,-1.21,0.)); +#65784 = LINE('',#65785,#65786); +#65785 = CARTESIAN_POINT('',(-1.6,-1.21,0.)); +#65786 = VECTOR('',#65787,1.); +#65787 = DIRECTION('',(1.,0.,0.)); +#65788 = ORIENTED_EDGE('',*,*,#65789,.F.); +#65789 = EDGE_CURVE('',#65750,#65782,#65790,.T.); +#65790 = CIRCLE('',#65791,4.E-02); +#65791 = AXIS2_PLACEMENT_3D('',#65792,#65793,#65794); +#65792 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#65793 = DIRECTION('',(1.,0.,-0.)); +#65794 = DIRECTION('',(0.,0.,1.)); +#65795 = ORIENTED_EDGE('',*,*,#65759,.F.); +#65796 = CYLINDRICAL_SURFACE('',#65797,4.E-02); +#65797 = AXIS2_PLACEMENT_3D('',#65798,#65799,#65800); +#65798 = CARTESIAN_POINT('',(-1.6,-1.21,4.E-02)); +#65799 = DIRECTION('',(1.,0.,0.)); +#65800 = DIRECTION('',(0.,-1.,0.)); +#65801 = ADVANCED_FACE('',(#65802),#65821,.T.); +#65802 = FACE_BOUND('',#65803,.T.); +#65803 = EDGE_LOOP('',(#65804,#65805,#65814,#65820)); +#65804 = ORIENTED_EDGE('',*,*,#65766,.T.); +#65805 = ORIENTED_EDGE('',*,*,#65806,.T.); +#65806 = EDGE_CURVE('',#65752,#65807,#65809,.T.); +#65807 = VERTEX_POINT('',#65808); +#65808 = CARTESIAN_POINT('',(-1.2,-1.21,2.5)); +#65809 = CIRCLE('',#65810,4.E-02); +#65810 = AXIS2_PLACEMENT_3D('',#65811,#65812,#65813); +#65811 = CARTESIAN_POINT('',(-1.2,-1.21,2.46)); +#65812 = DIRECTION('',(-1.,0.,0.)); +#65813 = DIRECTION('',(0.,0.,1.)); +#65814 = ORIENTED_EDGE('',*,*,#65815,.F.); +#65815 = EDGE_CURVE('',#65727,#65807,#65816,.T.); +#65816 = LINE('',#65817,#65818); +#65817 = CARTESIAN_POINT('',(-1.6,-1.21,2.5)); +#65818 = VECTOR('',#65819,1.); +#65819 = DIRECTION('',(1.,0.,0.)); +#65820 = ORIENTED_EDGE('',*,*,#65734,.F.); +#65821 = CYLINDRICAL_SURFACE('',#65822,4.E-02); +#65822 = AXIS2_PLACEMENT_3D('',#65823,#65824,#65825); +#65823 = CARTESIAN_POINT('',(-1.6,-1.21,2.46)); +#65824 = DIRECTION('',(1.,0.,0.)); +#65825 = DIRECTION('',(0.,-1.,0.)); +#65826 = ADVANCED_FACE('',(#65827),#65845,.F.); +#65827 = FACE_BOUND('',#65828,.F.); +#65828 = EDGE_LOOP('',(#65829,#65830,#65831,#65839)); +#65829 = ORIENTED_EDGE('',*,*,#65692,.F.); +#65830 = ORIENTED_EDGE('',*,*,#65781,.T.); +#65831 = ORIENTED_EDGE('',*,*,#65832,.T.); +#65832 = EDGE_CURVE('',#65782,#65833,#65835,.T.); +#65833 = VERTEX_POINT('',#65834); +#65834 = CARTESIAN_POINT('',(-1.2,1.21,0.)); +#65835 = LINE('',#65836,#65837); +#65836 = CARTESIAN_POINT('',(-1.2,-1.25,0.)); +#65837 = VECTOR('',#65838,1.); +#65838 = DIRECTION('',(0.,1.,0.)); +#65839 = ORIENTED_EDGE('',*,*,#65840,.F.); +#65840 = EDGE_CURVE('',#65693,#65833,#65841,.T.); +#65841 = LINE('',#65842,#65843); +#65842 = CARTESIAN_POINT('',(-1.6,1.21,0.)); +#65843 = VECTOR('',#65844,1.); +#65844 = DIRECTION('',(1.,0.,0.)); +#65845 = PLANE('',#65846); +#65846 = AXIS2_PLACEMENT_3D('',#65847,#65848,#65849); +#65847 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65848 = DIRECTION('',(0.,0.,1.)); +#65849 = DIRECTION('',(1.,0.,-0.)); +#65850 = ADVANCED_FACE('',(#65851),#65869,.T.); +#65851 = FACE_BOUND('',#65852,.T.); +#65852 = EDGE_LOOP('',(#65853,#65854,#65855,#65863)); +#65853 = ORIENTED_EDGE('',*,*,#65726,.F.); +#65854 = ORIENTED_EDGE('',*,*,#65815,.T.); +#65855 = ORIENTED_EDGE('',*,*,#65856,.T.); +#65856 = EDGE_CURVE('',#65807,#65857,#65859,.T.); +#65857 = VERTEX_POINT('',#65858); +#65858 = CARTESIAN_POINT('',(-1.2,1.21,2.5)); +#65859 = LINE('',#65860,#65861); +#65860 = CARTESIAN_POINT('',(-1.2,-1.25,2.5)); +#65861 = VECTOR('',#65862,1.); +#65862 = DIRECTION('',(0.,1.,0.)); +#65863 = ORIENTED_EDGE('',*,*,#65864,.F.); +#65864 = EDGE_CURVE('',#65718,#65857,#65865,.T.); +#65865 = LINE('',#65866,#65867); +#65866 = CARTESIAN_POINT('',(-1.6,1.21,2.5)); +#65867 = VECTOR('',#65868,1.); +#65868 = DIRECTION('',(1.,0.,0.)); +#65869 = PLANE('',#65870); +#65870 = AXIS2_PLACEMENT_3D('',#65871,#65872,#65873); +#65871 = CARTESIAN_POINT('',(-1.6,-1.25,2.5)); +#65872 = DIRECTION('',(0.,0.,1.)); +#65873 = DIRECTION('',(1.,0.,-0.)); +#65874 = ADVANCED_FACE('',(#65875),#65894,.T.); +#65875 = FACE_BOUND('',#65876,.T.); +#65876 = EDGE_LOOP('',(#65877,#65885,#65892,#65893)); +#65877 = ORIENTED_EDGE('',*,*,#65878,.T.); +#65878 = EDGE_CURVE('',#65701,#65879,#65881,.T.); +#65879 = VERTEX_POINT('',#65880); +#65880 = CARTESIAN_POINT('',(-1.2,1.25,4.E-02)); +#65881 = LINE('',#65882,#65883); +#65882 = CARTESIAN_POINT('',(-1.6,1.25,4.E-02)); +#65883 = VECTOR('',#65884,1.); +#65884 = DIRECTION('',(1.,0.,0.)); +#65885 = ORIENTED_EDGE('',*,*,#65886,.T.); +#65886 = EDGE_CURVE('',#65879,#65833,#65887,.T.); +#65887 = CIRCLE('',#65888,4.E-02); +#65888 = AXIS2_PLACEMENT_3D('',#65889,#65890,#65891); +#65889 = CARTESIAN_POINT('',(-1.2,1.21,4.E-02)); +#65890 = DIRECTION('',(-1.,0.,0.)); +#65891 = DIRECTION('',(0.,0.,1.)); +#65892 = ORIENTED_EDGE('',*,*,#65840,.F.); +#65893 = ORIENTED_EDGE('',*,*,#65700,.F.); +#65894 = CYLINDRICAL_SURFACE('',#65895,4.E-02); +#65895 = AXIS2_PLACEMENT_3D('',#65896,#65897,#65898); +#65896 = CARTESIAN_POINT('',(-1.6,1.21,4.E-02)); +#65897 = DIRECTION('',(1.,0.,0.)); +#65898 = DIRECTION('',(-0.,1.,0.)); +#65899 = ADVANCED_FACE('',(#65900),#65919,.T.); +#65900 = FACE_BOUND('',#65901,.T.); +#65901 = EDGE_LOOP('',(#65902,#65903,#65904,#65913)); +#65902 = ORIENTED_EDGE('',*,*,#65717,.T.); +#65903 = ORIENTED_EDGE('',*,*,#65864,.T.); +#65904 = ORIENTED_EDGE('',*,*,#65905,.F.); +#65905 = EDGE_CURVE('',#65906,#65857,#65908,.T.); +#65906 = VERTEX_POINT('',#65907); +#65907 = CARTESIAN_POINT('',(-1.2,1.25,2.46)); +#65908 = CIRCLE('',#65909,4.E-02); +#65909 = AXIS2_PLACEMENT_3D('',#65910,#65911,#65912); +#65910 = CARTESIAN_POINT('',(-1.2,1.21,2.46)); +#65911 = DIRECTION('',(1.,0.,-0.)); +#65912 = DIRECTION('',(0.,0.,1.)); +#65913 = ORIENTED_EDGE('',*,*,#65914,.F.); +#65914 = EDGE_CURVE('',#65710,#65906,#65915,.T.); +#65915 = LINE('',#65916,#65917); +#65916 = CARTESIAN_POINT('',(-1.6,1.25,2.46)); +#65917 = VECTOR('',#65918,1.); +#65918 = DIRECTION('',(1.,0.,0.)); +#65919 = CYLINDRICAL_SURFACE('',#65920,4.E-02); +#65920 = AXIS2_PLACEMENT_3D('',#65921,#65922,#65923); +#65921 = CARTESIAN_POINT('',(-1.6,1.21,2.46)); +#65922 = DIRECTION('',(1.,0.,0.)); +#65923 = DIRECTION('',(-0.,1.,0.)); +#65924 = ADVANCED_FACE('',(#65925),#65936,.T.); +#65925 = FACE_BOUND('',#65926,.T.); +#65926 = EDGE_LOOP('',(#65927,#65933,#65934,#65935)); +#65927 = ORIENTED_EDGE('',*,*,#65928,.F.); +#65928 = EDGE_CURVE('',#65879,#65906,#65929,.T.); +#65929 = LINE('',#65930,#65931); +#65930 = CARTESIAN_POINT('',(-1.2,1.25,0.)); +#65931 = VECTOR('',#65932,1.); +#65932 = DIRECTION('',(0.,0.,1.)); +#65933 = ORIENTED_EDGE('',*,*,#65878,.F.); +#65934 = ORIENTED_EDGE('',*,*,#65709,.T.); +#65935 = ORIENTED_EDGE('',*,*,#65914,.T.); +#65936 = PLANE('',#65937); +#65937 = AXIS2_PLACEMENT_3D('',#65938,#65939,#65940); +#65938 = CARTESIAN_POINT('',(-1.6,1.25,0.)); +#65939 = DIRECTION('',(0.,1.,0.)); +#65940 = DIRECTION('',(0.,-0.,1.)); +#65941 = ADVANCED_FACE('',(#65942,#65952),#66022,.T.); +#65942 = FACE_BOUND('',#65943,.T.); +#65943 = EDGE_LOOP('',(#65944,#65945,#65946,#65947,#65948,#65949,#65950, + #65951)); +#65944 = ORIENTED_EDGE('',*,*,#65749,.F.); +#65945 = ORIENTED_EDGE('',*,*,#65789,.T.); +#65946 = ORIENTED_EDGE('',*,*,#65832,.T.); +#65947 = ORIENTED_EDGE('',*,*,#65886,.F.); +#65948 = ORIENTED_EDGE('',*,*,#65928,.T.); +#65949 = ORIENTED_EDGE('',*,*,#65905,.T.); +#65950 = ORIENTED_EDGE('',*,*,#65856,.F.); +#65951 = ORIENTED_EDGE('',*,*,#65806,.F.); +#65952 = FACE_BOUND('',#65953,.T.); +#65953 = EDGE_LOOP('',(#65954,#65965,#65973,#65982,#65990,#65999,#66007, + #66016)); +#65954 = ORIENTED_EDGE('',*,*,#65955,.F.); +#65955 = EDGE_CURVE('',#65956,#65958,#65960,.T.); +#65956 = VERTEX_POINT('',#65957); +#65957 = CARTESIAN_POINT('',(-1.2,-1.21,8.E-02)); +#65958 = VERTEX_POINT('',#65959); +#65959 = CARTESIAN_POINT('',(-1.2,-1.17,4.E-02)); +#65960 = CIRCLE('',#65961,4.E-02); +#65961 = AXIS2_PLACEMENT_3D('',#65962,#65963,#65964); +#65962 = CARTESIAN_POINT('',(-1.2,-1.17,8.E-02)); +#65963 = DIRECTION('',(1.,0.,-0.)); +#65964 = DIRECTION('',(0.,0.,1.)); +#65965 = ORIENTED_EDGE('',*,*,#65966,.T.); +#65966 = EDGE_CURVE('',#65956,#65967,#65969,.T.); +#65967 = VERTEX_POINT('',#65968); +#65968 = CARTESIAN_POINT('',(-1.2,-1.21,2.42)); +#65969 = LINE('',#65970,#65971); +#65970 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#65971 = VECTOR('',#65972,1.); +#65972 = DIRECTION('',(0.,0.,1.)); +#65973 = ORIENTED_EDGE('',*,*,#65974,.T.); +#65974 = EDGE_CURVE('',#65967,#65975,#65977,.T.); +#65975 = VERTEX_POINT('',#65976); +#65976 = CARTESIAN_POINT('',(-1.2,-1.17,2.46)); +#65977 = CIRCLE('',#65978,4.E-02); +#65978 = AXIS2_PLACEMENT_3D('',#65979,#65980,#65981); +#65979 = CARTESIAN_POINT('',(-1.2,-1.17,2.42)); +#65980 = DIRECTION('',(-1.,0.,0.)); +#65981 = DIRECTION('',(0.,0.,1.)); +#65982 = ORIENTED_EDGE('',*,*,#65983,.T.); +#65983 = EDGE_CURVE('',#65975,#65984,#65986,.T.); +#65984 = VERTEX_POINT('',#65985); +#65985 = CARTESIAN_POINT('',(-1.2,1.17,2.46)); +#65986 = LINE('',#65987,#65988); +#65987 = CARTESIAN_POINT('',(-1.2,-1.21,2.46)); +#65988 = VECTOR('',#65989,1.); +#65989 = DIRECTION('',(0.,1.,0.)); +#65990 = ORIENTED_EDGE('',*,*,#65991,.F.); +#65991 = EDGE_CURVE('',#65992,#65984,#65994,.T.); +#65992 = VERTEX_POINT('',#65993); +#65993 = CARTESIAN_POINT('',(-1.2,1.21,2.42)); +#65994 = CIRCLE('',#65995,4.E-02); +#65995 = AXIS2_PLACEMENT_3D('',#65996,#65997,#65998); +#65996 = CARTESIAN_POINT('',(-1.2,1.17,2.42)); +#65997 = DIRECTION('',(1.,0.,-0.)); +#65998 = DIRECTION('',(0.,0.,1.)); +#65999 = ORIENTED_EDGE('',*,*,#66000,.F.); +#66000 = EDGE_CURVE('',#66001,#65992,#66003,.T.); +#66001 = VERTEX_POINT('',#66002); +#66002 = CARTESIAN_POINT('',(-1.2,1.21,8.E-02)); +#66003 = LINE('',#66004,#66005); +#66004 = CARTESIAN_POINT('',(-1.2,1.21,4.E-02)); +#66005 = VECTOR('',#66006,1.); +#66006 = DIRECTION('',(0.,0.,1.)); +#66007 = ORIENTED_EDGE('',*,*,#66008,.T.); +#66008 = EDGE_CURVE('',#66001,#66009,#66011,.T.); +#66009 = VERTEX_POINT('',#66010); +#66010 = CARTESIAN_POINT('',(-1.2,1.17,4.E-02)); +#66011 = CIRCLE('',#66012,4.E-02); +#66012 = AXIS2_PLACEMENT_3D('',#66013,#66014,#66015); +#66013 = CARTESIAN_POINT('',(-1.2,1.17,8.E-02)); +#66014 = DIRECTION('',(-1.,0.,0.)); +#66015 = DIRECTION('',(0.,0.,1.)); +#66016 = ORIENTED_EDGE('',*,*,#66017,.F.); +#66017 = EDGE_CURVE('',#65958,#66009,#66018,.T.); +#66018 = LINE('',#66019,#66020); +#66019 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#66020 = VECTOR('',#66021,1.); +#66021 = DIRECTION('',(0.,1.,0.)); +#66022 = PLANE('',#66023); +#66023 = AXIS2_PLACEMENT_3D('',#66024,#66025,#66026); +#66024 = CARTESIAN_POINT('',(-1.2,-1.25,0.)); +#66025 = DIRECTION('',(1.,0.,0.)); +#66026 = DIRECTION('',(0.,0.,1.)); +#66027 = ADVANCED_FACE('',(#66028),#66054,.T.); +#66028 = FACE_BOUND('',#66029,.T.); +#66029 = EDGE_LOOP('',(#66030,#66031,#66039,#66048)); +#66030 = ORIENTED_EDGE('',*,*,#65955,.T.); +#66031 = ORIENTED_EDGE('',*,*,#66032,.T.); +#66032 = EDGE_CURVE('',#65958,#66033,#66035,.T.); +#66033 = VERTEX_POINT('',#66034); +#66034 = CARTESIAN_POINT('',(1.2,-1.17,4.E-02)); +#66035 = LINE('',#66036,#66037); +#66036 = CARTESIAN_POINT('',(-1.2,-1.17,4.E-02)); +#66037 = VECTOR('',#66038,1.); +#66038 = DIRECTION('',(1.,0.,0.)); +#66039 = ORIENTED_EDGE('',*,*,#66040,.F.); +#66040 = EDGE_CURVE('',#66041,#66033,#66043,.T.); +#66041 = VERTEX_POINT('',#66042); +#66042 = CARTESIAN_POINT('',(1.2,-1.21,8.E-02)); +#66043 = CIRCLE('',#66044,4.E-02); +#66044 = AXIS2_PLACEMENT_3D('',#66045,#66046,#66047); +#66045 = CARTESIAN_POINT('',(1.2,-1.17,8.E-02)); +#66046 = DIRECTION('',(1.,0.,-0.)); +#66047 = DIRECTION('',(0.,0.,1.)); +#66048 = ORIENTED_EDGE('',*,*,#66049,.F.); +#66049 = EDGE_CURVE('',#65956,#66041,#66050,.T.); +#66050 = LINE('',#66051,#66052); +#66051 = CARTESIAN_POINT('',(-1.2,-1.21,8.E-02)); +#66052 = VECTOR('',#66053,1.); +#66053 = DIRECTION('',(1.,0.,0.)); +#66054 = CYLINDRICAL_SURFACE('',#66055,4.E-02); +#66055 = AXIS2_PLACEMENT_3D('',#66056,#66057,#66058); +#66056 = CARTESIAN_POINT('',(-1.2,-1.17,8.E-02)); +#66057 = DIRECTION('',(1.,0.,0.)); +#66058 = DIRECTION('',(0.,-1.,0.)); +#66059 = ADVANCED_FACE('',(#66060),#66078,.F.); +#66060 = FACE_BOUND('',#66061,.F.); +#66061 = EDGE_LOOP('',(#66062,#66063,#66064,#66072)); +#66062 = ORIENTED_EDGE('',*,*,#66017,.F.); +#66063 = ORIENTED_EDGE('',*,*,#66032,.T.); +#66064 = ORIENTED_EDGE('',*,*,#66065,.T.); +#66065 = EDGE_CURVE('',#66033,#66066,#66068,.T.); +#66066 = VERTEX_POINT('',#66067); +#66067 = CARTESIAN_POINT('',(1.2,1.17,4.E-02)); +#66068 = LINE('',#66069,#66070); +#66069 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66070 = VECTOR('',#66071,1.); +#66071 = DIRECTION('',(0.,1.,0.)); +#66072 = ORIENTED_EDGE('',*,*,#66073,.F.); +#66073 = EDGE_CURVE('',#66009,#66066,#66074,.T.); +#66074 = LINE('',#66075,#66076); +#66075 = CARTESIAN_POINT('',(-1.2,1.17,4.E-02)); +#66076 = VECTOR('',#66077,1.); +#66077 = DIRECTION('',(1.,0.,0.)); +#66078 = PLANE('',#66079); +#66079 = AXIS2_PLACEMENT_3D('',#66080,#66081,#66082); +#66080 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#66081 = DIRECTION('',(0.,0.,1.)); +#66082 = DIRECTION('',(1.,0.,-0.)); +#66083 = ADVANCED_FACE('',(#66084),#66103,.T.); +#66084 = FACE_BOUND('',#66085,.T.); +#66085 = EDGE_LOOP('',(#66086,#66094,#66101,#66102)); +#66086 = ORIENTED_EDGE('',*,*,#66087,.T.); +#66087 = EDGE_CURVE('',#66001,#66088,#66090,.T.); +#66088 = VERTEX_POINT('',#66089); +#66089 = CARTESIAN_POINT('',(1.2,1.21,8.E-02)); +#66090 = LINE('',#66091,#66092); +#66091 = CARTESIAN_POINT('',(-1.2,1.21,8.E-02)); +#66092 = VECTOR('',#66093,1.); +#66093 = DIRECTION('',(1.,0.,0.)); +#66094 = ORIENTED_EDGE('',*,*,#66095,.T.); +#66095 = EDGE_CURVE('',#66088,#66066,#66096,.T.); +#66096 = CIRCLE('',#66097,4.E-02); +#66097 = AXIS2_PLACEMENT_3D('',#66098,#66099,#66100); +#66098 = CARTESIAN_POINT('',(1.2,1.17,8.E-02)); +#66099 = DIRECTION('',(-1.,0.,0.)); +#66100 = DIRECTION('',(0.,0.,1.)); +#66101 = ORIENTED_EDGE('',*,*,#66073,.F.); +#66102 = ORIENTED_EDGE('',*,*,#66008,.F.); +#66103 = CYLINDRICAL_SURFACE('',#66104,4.E-02); +#66104 = AXIS2_PLACEMENT_3D('',#66105,#66106,#66107); +#66105 = CARTESIAN_POINT('',(-1.2,1.17,8.E-02)); +#66106 = DIRECTION('',(1.,0.,0.)); +#66107 = DIRECTION('',(-0.,1.,0.)); +#66108 = ADVANCED_FACE('',(#66109),#66127,.T.); +#66109 = FACE_BOUND('',#66110,.T.); +#66110 = EDGE_LOOP('',(#66111,#66119,#66120,#66121)); +#66111 = ORIENTED_EDGE('',*,*,#66112,.F.); +#66112 = EDGE_CURVE('',#66088,#66113,#66115,.T.); +#66113 = VERTEX_POINT('',#66114); +#66114 = CARTESIAN_POINT('',(1.2,1.21,2.42)); +#66115 = LINE('',#66116,#66117); +#66116 = CARTESIAN_POINT('',(1.2,1.21,4.E-02)); +#66117 = VECTOR('',#66118,1.); +#66118 = DIRECTION('',(0.,0.,1.)); +#66119 = ORIENTED_EDGE('',*,*,#66087,.F.); +#66120 = ORIENTED_EDGE('',*,*,#66000,.T.); +#66121 = ORIENTED_EDGE('',*,*,#66122,.T.); +#66122 = EDGE_CURVE('',#65992,#66113,#66123,.T.); +#66123 = LINE('',#66124,#66125); +#66124 = CARTESIAN_POINT('',(-1.2,1.21,2.42)); +#66125 = VECTOR('',#66126,1.); +#66126 = DIRECTION('',(1.,0.,0.)); +#66127 = PLANE('',#66128); +#66128 = AXIS2_PLACEMENT_3D('',#66129,#66130,#66131); +#66129 = CARTESIAN_POINT('',(-1.2,1.21,4.E-02)); +#66130 = DIRECTION('',(0.,1.,0.)); +#66131 = DIRECTION('',(0.,-0.,1.)); +#66132 = ADVANCED_FACE('',(#66133),#66152,.T.); +#66133 = FACE_BOUND('',#66134,.T.); +#66134 = EDGE_LOOP('',(#66135,#66136,#66144,#66151)); +#66135 = ORIENTED_EDGE('',*,*,#65991,.T.); +#66136 = ORIENTED_EDGE('',*,*,#66137,.T.); +#66137 = EDGE_CURVE('',#65984,#66138,#66140,.T.); +#66138 = VERTEX_POINT('',#66139); +#66139 = CARTESIAN_POINT('',(1.2,1.17,2.46)); +#66140 = LINE('',#66141,#66142); +#66141 = CARTESIAN_POINT('',(-1.2,1.17,2.46)); +#66142 = VECTOR('',#66143,1.); +#66143 = DIRECTION('',(1.,0.,0.)); +#66144 = ORIENTED_EDGE('',*,*,#66145,.F.); +#66145 = EDGE_CURVE('',#66113,#66138,#66146,.T.); +#66146 = CIRCLE('',#66147,4.E-02); +#66147 = AXIS2_PLACEMENT_3D('',#66148,#66149,#66150); +#66148 = CARTESIAN_POINT('',(1.2,1.17,2.42)); +#66149 = DIRECTION('',(1.,0.,-0.)); +#66150 = DIRECTION('',(0.,0.,1.)); +#66151 = ORIENTED_EDGE('',*,*,#66122,.F.); +#66152 = CYLINDRICAL_SURFACE('',#66153,4.E-02); +#66153 = AXIS2_PLACEMENT_3D('',#66154,#66155,#66156); +#66154 = CARTESIAN_POINT('',(-1.2,1.17,2.42)); +#66155 = DIRECTION('',(1.,0.,0.)); +#66156 = DIRECTION('',(-0.,1.,0.)); +#66157 = ADVANCED_FACE('',(#66158),#66176,.T.); +#66158 = FACE_BOUND('',#66159,.T.); +#66159 = EDGE_LOOP('',(#66160,#66161,#66169,#66175)); +#66160 = ORIENTED_EDGE('',*,*,#65983,.F.); +#66161 = ORIENTED_EDGE('',*,*,#66162,.T.); +#66162 = EDGE_CURVE('',#65975,#66163,#66165,.T.); +#66163 = VERTEX_POINT('',#66164); +#66164 = CARTESIAN_POINT('',(1.2,-1.17,2.46)); +#66165 = LINE('',#66166,#66167); +#66166 = CARTESIAN_POINT('',(-1.2,-1.17,2.46)); +#66167 = VECTOR('',#66168,1.); +#66168 = DIRECTION('',(1.,0.,0.)); +#66169 = ORIENTED_EDGE('',*,*,#66170,.T.); +#66170 = EDGE_CURVE('',#66163,#66138,#66171,.T.); +#66171 = LINE('',#66172,#66173); +#66172 = CARTESIAN_POINT('',(1.2,-1.21,2.46)); +#66173 = VECTOR('',#66174,1.); +#66174 = DIRECTION('',(0.,1.,0.)); +#66175 = ORIENTED_EDGE('',*,*,#66137,.F.); +#66176 = PLANE('',#66177); +#66177 = AXIS2_PLACEMENT_3D('',#66178,#66179,#66180); +#66178 = CARTESIAN_POINT('',(-1.2,-1.21,2.46)); +#66179 = DIRECTION('',(0.,0.,1.)); +#66180 = DIRECTION('',(1.,0.,-0.)); +#66181 = ADVANCED_FACE('',(#66182),#66201,.T.); +#66182 = FACE_BOUND('',#66183,.T.); +#66183 = EDGE_LOOP('',(#66184,#66192,#66199,#66200)); +#66184 = ORIENTED_EDGE('',*,*,#66185,.T.); +#66185 = EDGE_CURVE('',#65967,#66186,#66188,.T.); +#66186 = VERTEX_POINT('',#66187); +#66187 = CARTESIAN_POINT('',(1.2,-1.21,2.42)); +#66188 = LINE('',#66189,#66190); +#66189 = CARTESIAN_POINT('',(-1.2,-1.21,2.42)); +#66190 = VECTOR('',#66191,1.); +#66191 = DIRECTION('',(1.,0.,0.)); +#66192 = ORIENTED_EDGE('',*,*,#66193,.T.); +#66193 = EDGE_CURVE('',#66186,#66163,#66194,.T.); +#66194 = CIRCLE('',#66195,4.E-02); +#66195 = AXIS2_PLACEMENT_3D('',#66196,#66197,#66198); +#66196 = CARTESIAN_POINT('',(1.2,-1.17,2.42)); +#66197 = DIRECTION('',(-1.,0.,0.)); +#66198 = DIRECTION('',(0.,0.,1.)); +#66199 = ORIENTED_EDGE('',*,*,#66162,.F.); +#66200 = ORIENTED_EDGE('',*,*,#65974,.F.); +#66201 = CYLINDRICAL_SURFACE('',#66202,4.E-02); +#66202 = AXIS2_PLACEMENT_3D('',#66203,#66204,#66205); +#66203 = CARTESIAN_POINT('',(-1.2,-1.17,2.42)); +#66204 = DIRECTION('',(1.,0.,0.)); +#66205 = DIRECTION('',(0.,-1.,0.)); +#66206 = ADVANCED_FACE('',(#66207),#66218,.F.); +#66207 = FACE_BOUND('',#66208,.F.); +#66208 = EDGE_LOOP('',(#66209,#66215,#66216,#66217)); +#66209 = ORIENTED_EDGE('',*,*,#66210,.F.); +#66210 = EDGE_CURVE('',#66041,#66186,#66211,.T.); +#66211 = LINE('',#66212,#66213); +#66212 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66213 = VECTOR('',#66214,1.); +#66214 = DIRECTION('',(0.,0.,1.)); +#66215 = ORIENTED_EDGE('',*,*,#66049,.F.); +#66216 = ORIENTED_EDGE('',*,*,#65966,.T.); +#66217 = ORIENTED_EDGE('',*,*,#66185,.T.); +#66218 = PLANE('',#66219); +#66219 = AXIS2_PLACEMENT_3D('',#66220,#66221,#66222); +#66220 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#66221 = DIRECTION('',(0.,1.,0.)); +#66222 = DIRECTION('',(0.,-0.,1.)); +#66223 = ADVANCED_FACE('',(#66224,#66294),#66304,.F.); +#66224 = FACE_BOUND('',#66225,.F.); +#66225 = EDGE_LOOP('',(#66226,#66236,#66245,#66253,#66262,#66270,#66279, + #66287)); +#66226 = ORIENTED_EDGE('',*,*,#66227,.F.); +#66227 = EDGE_CURVE('',#66228,#66230,#66232,.T.); +#66228 = VERTEX_POINT('',#66229); +#66229 = CARTESIAN_POINT('',(1.2,-1.25,4.E-02)); +#66230 = VERTEX_POINT('',#66231); +#66231 = CARTESIAN_POINT('',(1.2,-1.25,2.46)); +#66232 = LINE('',#66233,#66234); +#66233 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66234 = VECTOR('',#66235,1.); +#66235 = DIRECTION('',(0.,0.,1.)); +#66236 = ORIENTED_EDGE('',*,*,#66237,.T.); +#66237 = EDGE_CURVE('',#66228,#66238,#66240,.T.); +#66238 = VERTEX_POINT('',#66239); +#66239 = CARTESIAN_POINT('',(1.2,-1.21,0.)); +#66240 = CIRCLE('',#66241,4.E-02); +#66241 = AXIS2_PLACEMENT_3D('',#66242,#66243,#66244); +#66242 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66243 = DIRECTION('',(1.,0.,-0.)); +#66244 = DIRECTION('',(0.,0.,1.)); +#66245 = ORIENTED_EDGE('',*,*,#66246,.T.); +#66246 = EDGE_CURVE('',#66238,#66247,#66249,.T.); +#66247 = VERTEX_POINT('',#66248); +#66248 = CARTESIAN_POINT('',(1.2,1.21,0.)); +#66249 = LINE('',#66250,#66251); +#66250 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66251 = VECTOR('',#66252,1.); +#66252 = DIRECTION('',(0.,1.,0.)); +#66253 = ORIENTED_EDGE('',*,*,#66254,.F.); +#66254 = EDGE_CURVE('',#66255,#66247,#66257,.T.); +#66255 = VERTEX_POINT('',#66256); +#66256 = CARTESIAN_POINT('',(1.2,1.25,4.E-02)); +#66257 = CIRCLE('',#66258,4.E-02); +#66258 = AXIS2_PLACEMENT_3D('',#66259,#66260,#66261); +#66259 = CARTESIAN_POINT('',(1.2,1.21,4.E-02)); +#66260 = DIRECTION('',(-1.,0.,0.)); +#66261 = DIRECTION('',(0.,0.,1.)); +#66262 = ORIENTED_EDGE('',*,*,#66263,.T.); +#66263 = EDGE_CURVE('',#66255,#66264,#66266,.T.); +#66264 = VERTEX_POINT('',#66265); +#66265 = CARTESIAN_POINT('',(1.2,1.25,2.46)); +#66266 = LINE('',#66267,#66268); +#66267 = CARTESIAN_POINT('',(1.2,1.25,0.)); +#66268 = VECTOR('',#66269,1.); +#66269 = DIRECTION('',(0.,0.,1.)); +#66270 = ORIENTED_EDGE('',*,*,#66271,.T.); +#66271 = EDGE_CURVE('',#66264,#66272,#66274,.T.); +#66272 = VERTEX_POINT('',#66273); +#66273 = CARTESIAN_POINT('',(1.2,1.21,2.5)); +#66274 = CIRCLE('',#66275,4.E-02); +#66275 = AXIS2_PLACEMENT_3D('',#66276,#66277,#66278); +#66276 = CARTESIAN_POINT('',(1.2,1.21,2.46)); +#66277 = DIRECTION('',(1.,0.,-0.)); +#66278 = DIRECTION('',(0.,0.,1.)); +#66279 = ORIENTED_EDGE('',*,*,#66280,.F.); +#66280 = EDGE_CURVE('',#66281,#66272,#66283,.T.); +#66281 = VERTEX_POINT('',#66282); +#66282 = CARTESIAN_POINT('',(1.2,-1.21,2.5)); +#66283 = LINE('',#66284,#66285); +#66284 = CARTESIAN_POINT('',(1.2,-1.25,2.5)); +#66285 = VECTOR('',#66286,1.); +#66286 = DIRECTION('',(0.,1.,0.)); +#66287 = ORIENTED_EDGE('',*,*,#66288,.F.); +#66288 = EDGE_CURVE('',#66230,#66281,#66289,.T.); +#66289 = CIRCLE('',#66290,4.E-02); +#66290 = AXIS2_PLACEMENT_3D('',#66291,#66292,#66293); +#66291 = CARTESIAN_POINT('',(1.2,-1.21,2.46)); +#66292 = DIRECTION('',(-1.,0.,0.)); +#66293 = DIRECTION('',(0.,0.,1.)); +#66294 = FACE_BOUND('',#66295,.F.); +#66295 = EDGE_LOOP('',(#66296,#66297,#66298,#66299,#66300,#66301,#66302, + #66303)); +#66296 = ORIENTED_EDGE('',*,*,#66040,.F.); +#66297 = ORIENTED_EDGE('',*,*,#66210,.T.); +#66298 = ORIENTED_EDGE('',*,*,#66193,.T.); +#66299 = ORIENTED_EDGE('',*,*,#66170,.T.); +#66300 = ORIENTED_EDGE('',*,*,#66145,.F.); +#66301 = ORIENTED_EDGE('',*,*,#66112,.F.); +#66302 = ORIENTED_EDGE('',*,*,#66095,.T.); +#66303 = ORIENTED_EDGE('',*,*,#66065,.F.); +#66304 = PLANE('',#66305); +#66305 = AXIS2_PLACEMENT_3D('',#66306,#66307,#66308); +#66306 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66307 = DIRECTION('',(1.,0.,0.)); +#66308 = DIRECTION('',(0.,0.,1.)); +#66309 = ADVANCED_FACE('',(#66310),#66335,.F.); +#66310 = FACE_BOUND('',#66311,.F.); +#66311 = EDGE_LOOP('',(#66312,#66322,#66328,#66329)); +#66312 = ORIENTED_EDGE('',*,*,#66313,.F.); +#66313 = EDGE_CURVE('',#66314,#66316,#66318,.T.); +#66314 = VERTEX_POINT('',#66315); +#66315 = CARTESIAN_POINT('',(1.6,-1.25,4.E-02)); +#66316 = VERTEX_POINT('',#66317); +#66317 = CARTESIAN_POINT('',(1.6,-1.25,2.46)); +#66318 = LINE('',#66319,#66320); +#66319 = CARTESIAN_POINT('',(1.6,-1.25,0.)); +#66320 = VECTOR('',#66321,1.); +#66321 = DIRECTION('',(0.,0.,1.)); +#66322 = ORIENTED_EDGE('',*,*,#66323,.F.); +#66323 = EDGE_CURVE('',#66228,#66314,#66324,.T.); +#66324 = LINE('',#66325,#66326); +#66325 = CARTESIAN_POINT('',(1.2,-1.25,4.E-02)); +#66326 = VECTOR('',#66327,1.); +#66327 = DIRECTION('',(1.,0.,0.)); +#66328 = ORIENTED_EDGE('',*,*,#66227,.T.); +#66329 = ORIENTED_EDGE('',*,*,#66330,.T.); +#66330 = EDGE_CURVE('',#66230,#66316,#66331,.T.); +#66331 = LINE('',#66332,#66333); +#66332 = CARTESIAN_POINT('',(1.2,-1.25,2.46)); +#66333 = VECTOR('',#66334,1.); +#66334 = DIRECTION('',(1.,0.,0.)); +#66335 = PLANE('',#66336); +#66336 = AXIS2_PLACEMENT_3D('',#66337,#66338,#66339); +#66337 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66338 = DIRECTION('',(0.,1.,0.)); +#66339 = DIRECTION('',(0.,-0.,1.)); +#66340 = ADVANCED_FACE('',(#66341),#66360,.T.); +#66341 = FACE_BOUND('',#66342,.T.); +#66342 = EDGE_LOOP('',(#66343,#66344,#66352,#66359)); +#66343 = ORIENTED_EDGE('',*,*,#66237,.T.); +#66344 = ORIENTED_EDGE('',*,*,#66345,.T.); +#66345 = EDGE_CURVE('',#66238,#66346,#66348,.T.); +#66346 = VERTEX_POINT('',#66347); +#66347 = CARTESIAN_POINT('',(1.6,-1.21,0.)); +#66348 = LINE('',#66349,#66350); +#66349 = CARTESIAN_POINT('',(1.2,-1.21,0.)); +#66350 = VECTOR('',#66351,1.); +#66351 = DIRECTION('',(1.,0.,0.)); +#66352 = ORIENTED_EDGE('',*,*,#66353,.F.); +#66353 = EDGE_CURVE('',#66314,#66346,#66354,.T.); +#66354 = CIRCLE('',#66355,4.E-02); +#66355 = AXIS2_PLACEMENT_3D('',#66356,#66357,#66358); +#66356 = CARTESIAN_POINT('',(1.6,-1.21,4.E-02)); +#66357 = DIRECTION('',(1.,0.,-0.)); +#66358 = DIRECTION('',(0.,0.,1.)); +#66359 = ORIENTED_EDGE('',*,*,#66323,.F.); +#66360 = CYLINDRICAL_SURFACE('',#66361,4.E-02); +#66361 = AXIS2_PLACEMENT_3D('',#66362,#66363,#66364); +#66362 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66363 = DIRECTION('',(1.,0.,0.)); +#66364 = DIRECTION('',(0.,-1.,0.)); +#66365 = ADVANCED_FACE('',(#66366),#66385,.T.); +#66366 = FACE_BOUND('',#66367,.T.); +#66367 = EDGE_LOOP('',(#66368,#66369,#66378,#66384)); +#66368 = ORIENTED_EDGE('',*,*,#66330,.T.); +#66369 = ORIENTED_EDGE('',*,*,#66370,.T.); +#66370 = EDGE_CURVE('',#66316,#66371,#66373,.T.); +#66371 = VERTEX_POINT('',#66372); +#66372 = CARTESIAN_POINT('',(1.6,-1.21,2.5)); +#66373 = CIRCLE('',#66374,4.E-02); +#66374 = AXIS2_PLACEMENT_3D('',#66375,#66376,#66377); +#66375 = CARTESIAN_POINT('',(1.6,-1.21,2.46)); +#66376 = DIRECTION('',(-1.,0.,0.)); +#66377 = DIRECTION('',(0.,0.,1.)); +#66378 = ORIENTED_EDGE('',*,*,#66379,.F.); +#66379 = EDGE_CURVE('',#66281,#66371,#66380,.T.); +#66380 = LINE('',#66381,#66382); +#66381 = CARTESIAN_POINT('',(1.2,-1.21,2.5)); +#66382 = VECTOR('',#66383,1.); +#66383 = DIRECTION('',(1.,0.,0.)); +#66384 = ORIENTED_EDGE('',*,*,#66288,.F.); +#66385 = CYLINDRICAL_SURFACE('',#66386,4.E-02); +#66386 = AXIS2_PLACEMENT_3D('',#66387,#66388,#66389); +#66387 = CARTESIAN_POINT('',(1.2,-1.21,2.46)); +#66388 = DIRECTION('',(1.,0.,0.)); +#66389 = DIRECTION('',(0.,-1.,0.)); +#66390 = ADVANCED_FACE('',(#66391),#66409,.F.); +#66391 = FACE_BOUND('',#66392,.F.); +#66392 = EDGE_LOOP('',(#66393,#66394,#66395,#66403)); +#66393 = ORIENTED_EDGE('',*,*,#66246,.F.); +#66394 = ORIENTED_EDGE('',*,*,#66345,.T.); +#66395 = ORIENTED_EDGE('',*,*,#66396,.T.); +#66396 = EDGE_CURVE('',#66346,#66397,#66399,.T.); +#66397 = VERTEX_POINT('',#66398); +#66398 = CARTESIAN_POINT('',(1.6,1.21,0.)); +#66399 = LINE('',#66400,#66401); +#66400 = CARTESIAN_POINT('',(1.6,-1.25,0.)); +#66401 = VECTOR('',#66402,1.); +#66402 = DIRECTION('',(0.,1.,0.)); +#66403 = ORIENTED_EDGE('',*,*,#66404,.F.); +#66404 = EDGE_CURVE('',#66247,#66397,#66405,.T.); +#66405 = LINE('',#66406,#66407); +#66406 = CARTESIAN_POINT('',(1.2,1.21,0.)); +#66407 = VECTOR('',#66408,1.); +#66408 = DIRECTION('',(1.,0.,0.)); +#66409 = PLANE('',#66410); +#66410 = AXIS2_PLACEMENT_3D('',#66411,#66412,#66413); +#66411 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66412 = DIRECTION('',(0.,0.,1.)); +#66413 = DIRECTION('',(1.,0.,-0.)); +#66414 = ADVANCED_FACE('',(#66415),#66433,.T.); +#66415 = FACE_BOUND('',#66416,.T.); +#66416 = EDGE_LOOP('',(#66417,#66418,#66419,#66427)); +#66417 = ORIENTED_EDGE('',*,*,#66280,.F.); +#66418 = ORIENTED_EDGE('',*,*,#66379,.T.); +#66419 = ORIENTED_EDGE('',*,*,#66420,.T.); +#66420 = EDGE_CURVE('',#66371,#66421,#66423,.T.); +#66421 = VERTEX_POINT('',#66422); +#66422 = CARTESIAN_POINT('',(1.6,1.21,2.5)); +#66423 = LINE('',#66424,#66425); +#66424 = CARTESIAN_POINT('',(1.6,-1.25,2.5)); +#66425 = VECTOR('',#66426,1.); +#66426 = DIRECTION('',(0.,1.,0.)); +#66427 = ORIENTED_EDGE('',*,*,#66428,.F.); +#66428 = EDGE_CURVE('',#66272,#66421,#66429,.T.); +#66429 = LINE('',#66430,#66431); +#66430 = CARTESIAN_POINT('',(1.2,1.21,2.5)); +#66431 = VECTOR('',#66432,1.); +#66432 = DIRECTION('',(1.,0.,0.)); +#66433 = PLANE('',#66434); +#66434 = AXIS2_PLACEMENT_3D('',#66435,#66436,#66437); +#66435 = CARTESIAN_POINT('',(1.2,-1.25,2.5)); +#66436 = DIRECTION('',(0.,0.,1.)); +#66437 = DIRECTION('',(1.,0.,-0.)); +#66438 = ADVANCED_FACE('',(#66439),#66458,.T.); +#66439 = FACE_BOUND('',#66440,.T.); +#66440 = EDGE_LOOP('',(#66441,#66449,#66456,#66457)); +#66441 = ORIENTED_EDGE('',*,*,#66442,.T.); +#66442 = EDGE_CURVE('',#66255,#66443,#66445,.T.); +#66443 = VERTEX_POINT('',#66444); +#66444 = CARTESIAN_POINT('',(1.6,1.25,4.E-02)); +#66445 = LINE('',#66446,#66447); +#66446 = CARTESIAN_POINT('',(1.2,1.25,4.E-02)); +#66447 = VECTOR('',#66448,1.); +#66448 = DIRECTION('',(1.,0.,0.)); +#66449 = ORIENTED_EDGE('',*,*,#66450,.T.); +#66450 = EDGE_CURVE('',#66443,#66397,#66451,.T.); +#66451 = CIRCLE('',#66452,4.E-02); +#66452 = AXIS2_PLACEMENT_3D('',#66453,#66454,#66455); +#66453 = CARTESIAN_POINT('',(1.6,1.21,4.E-02)); +#66454 = DIRECTION('',(-1.,0.,0.)); +#66455 = DIRECTION('',(0.,0.,1.)); +#66456 = ORIENTED_EDGE('',*,*,#66404,.F.); +#66457 = ORIENTED_EDGE('',*,*,#66254,.F.); +#66458 = CYLINDRICAL_SURFACE('',#66459,4.E-02); +#66459 = AXIS2_PLACEMENT_3D('',#66460,#66461,#66462); +#66460 = CARTESIAN_POINT('',(1.2,1.21,4.E-02)); +#66461 = DIRECTION('',(1.,0.,0.)); +#66462 = DIRECTION('',(-0.,1.,0.)); +#66463 = ADVANCED_FACE('',(#66464),#66483,.T.); +#66464 = FACE_BOUND('',#66465,.T.); +#66465 = EDGE_LOOP('',(#66466,#66467,#66468,#66477)); +#66466 = ORIENTED_EDGE('',*,*,#66271,.T.); +#66467 = ORIENTED_EDGE('',*,*,#66428,.T.); +#66468 = ORIENTED_EDGE('',*,*,#66469,.F.); +#66469 = EDGE_CURVE('',#66470,#66421,#66472,.T.); +#66470 = VERTEX_POINT('',#66471); +#66471 = CARTESIAN_POINT('',(1.6,1.25,2.46)); +#66472 = CIRCLE('',#66473,4.E-02); +#66473 = AXIS2_PLACEMENT_3D('',#66474,#66475,#66476); +#66474 = CARTESIAN_POINT('',(1.6,1.21,2.46)); +#66475 = DIRECTION('',(1.,0.,-0.)); +#66476 = DIRECTION('',(0.,0.,1.)); +#66477 = ORIENTED_EDGE('',*,*,#66478,.F.); +#66478 = EDGE_CURVE('',#66264,#66470,#66479,.T.); +#66479 = LINE('',#66480,#66481); +#66480 = CARTESIAN_POINT('',(1.2,1.25,2.46)); +#66481 = VECTOR('',#66482,1.); +#66482 = DIRECTION('',(1.,0.,0.)); +#66483 = CYLINDRICAL_SURFACE('',#66484,4.E-02); +#66484 = AXIS2_PLACEMENT_3D('',#66485,#66486,#66487); +#66485 = CARTESIAN_POINT('',(1.2,1.21,2.46)); +#66486 = DIRECTION('',(1.,0.,0.)); +#66487 = DIRECTION('',(-0.,1.,0.)); +#66488 = ADVANCED_FACE('',(#66489),#66500,.T.); +#66489 = FACE_BOUND('',#66490,.T.); +#66490 = EDGE_LOOP('',(#66491,#66497,#66498,#66499)); +#66491 = ORIENTED_EDGE('',*,*,#66492,.F.); +#66492 = EDGE_CURVE('',#66443,#66470,#66493,.T.); +#66493 = LINE('',#66494,#66495); +#66494 = CARTESIAN_POINT('',(1.6,1.25,0.)); +#66495 = VECTOR('',#66496,1.); +#66496 = DIRECTION('',(0.,0.,1.)); +#66497 = ORIENTED_EDGE('',*,*,#66442,.F.); +#66498 = ORIENTED_EDGE('',*,*,#66263,.T.); +#66499 = ORIENTED_EDGE('',*,*,#66478,.T.); +#66500 = PLANE('',#66501); +#66501 = AXIS2_PLACEMENT_3D('',#66502,#66503,#66504); +#66502 = CARTESIAN_POINT('',(1.2,1.25,0.)); +#66503 = DIRECTION('',(0.,1.,0.)); +#66504 = DIRECTION('',(0.,-0.,1.)); +#66505 = ADVANCED_FACE('',(#66506),#66516,.T.); +#66506 = FACE_BOUND('',#66507,.T.); +#66507 = EDGE_LOOP('',(#66508,#66509,#66510,#66511,#66512,#66513,#66514, + #66515)); +#66508 = ORIENTED_EDGE('',*,*,#66313,.F.); +#66509 = ORIENTED_EDGE('',*,*,#66353,.T.); +#66510 = ORIENTED_EDGE('',*,*,#66396,.T.); +#66511 = ORIENTED_EDGE('',*,*,#66450,.F.); +#66512 = ORIENTED_EDGE('',*,*,#66492,.T.); +#66513 = ORIENTED_EDGE('',*,*,#66469,.T.); +#66514 = ORIENTED_EDGE('',*,*,#66420,.F.); +#66515 = ORIENTED_EDGE('',*,*,#66370,.F.); +#66516 = PLANE('',#66517); +#66517 = AXIS2_PLACEMENT_3D('',#66518,#66519,#66520); +#66518 = CARTESIAN_POINT('',(1.6,-1.25,0.)); +#66519 = DIRECTION('',(1.,0.,0.)); +#66520 = DIRECTION('',(0.,0.,1.)); +#66521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#66525)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#66522,#66523,#66524)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#66522 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#66523 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#66524 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#66525 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#66522, + 'distance_accuracy_value','confusion accuracy'); +#66526 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66527,#66529); +#66527 = ( REPRESENTATION_RELATIONSHIP('','',#65666,#65643) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66528) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66528 = ITEM_DEFINED_TRANSFORMATION('','',#11,#65644); +#66529 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66530); +#66530 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('69','=>[0:1:1:39]','',#65638, + #65661,$); +#66531 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#65663)); +#66532 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66533,#66535); +#66533 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66534) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66534 = ITEM_DEFINED_TRANSFORMATION('','',#11,#219); +#66535 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66536); +#66536 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('71','R61','',#5,#523,$); +#66537 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66538,#66540); +#66538 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66539) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66539 = ITEM_DEFINED_TRANSFORMATION('','',#11,#223); +#66540 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66541); +#66541 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('72','Rcc1','',#5,#523,$); +#66542 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66543,#66545); +#66543 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66544) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66544 = ITEM_DEFINED_TRANSFORMATION('','',#11,#227); +#66545 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66546); +#66546 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('73','R1','',#5,#523,$); +#66547 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66548,#66550); +#66548 = ( REPRESENTATION_RELATIONSHIP('','',#6178,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66549) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66549 = ITEM_DEFINED_TRANSFORMATION('','',#11,#231); +#66550 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66551); +#66551 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('74','P5','',#5,#6173,$); +#66552 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66553,#66555); +#66553 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66554) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66554 = ITEM_DEFINED_TRANSFORMATION('','',#11,#235); +#66555 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66556); +#66556 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('75','DB3','',#5,#10415,$); +#66557 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66558,#66560); +#66558 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66559) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66559 = ITEM_DEFINED_TRANSFORMATION('','',#11,#239); +#66560 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66561); +#66561 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('76','C41','',#5,#42695,$); +#66562 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66563,#66565); +#66563 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66564) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66564 = ITEM_DEFINED_TRANSFORMATION('','',#11,#243); +#66565 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66566); +#66566 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('77','R55','',#5,#523,$); +#66567 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66568,#66570); +#66568 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66569) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66569 = ITEM_DEFINED_TRANSFORMATION('','',#11,#247); +#66570 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66571); +#66571 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('78','Rled','',#5,#523,$); +#66572 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66573,#66575); +#66573 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66574) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66574 = ITEM_DEFINED_TRANSFORMATION('','',#11,#251); +#66575 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66576); +#66576 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('79','Rgs','',#5,#523,$); +#66577 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66578,#66580); +#66578 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66579) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66579 = ITEM_DEFINED_TRANSFORMATION('','',#11,#255); +#66580 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66581); +#66581 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('80','P8','',#5,#11985,$); +#66582 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66583,#66585); +#66583 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66584) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66584 = ITEM_DEFINED_TRANSFORMATION('','',#11,#259); +#66585 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66586); +#66586 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('81','R41','',#5,#523,$); +#66587 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66588,#66590); +#66588 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66589) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66589 = ITEM_DEFINED_TRANSFORMATION('','',#11,#263); +#66590 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66591); +#66591 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('82','DB4','',#5,#10415,$); +#66592 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66593,#66595); +#66593 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66594) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66594 = ITEM_DEFINED_TRANSFORMATION('','',#11,#267); +#66595 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66596); +#66596 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('83','RB2','',#5,#523,$); +#66597 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66598,#66600); +#66598 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66599) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66599 = ITEM_DEFINED_TRANSFORMATION('','',#11,#271); +#66600 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66601); +#66601 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('84','Rcc2','',#5,#523,$); +#66602 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66603,#66605); +#66603 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66604) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66604 = ITEM_DEFINED_TRANSFORMATION('','',#11,#275); +#66605 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66606); +#66606 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('85','D1','',#5,#10415,$); +#66607 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66608,#66610); +#66608 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66609) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66609 = ITEM_DEFINED_TRANSFORMATION('','',#11,#279); +#66610 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66611); +#66611 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('86','Rtp','',#5,#523,$); +#66612 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66613,#66615); +#66613 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66614) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66614 = ITEM_DEFINED_TRANSFORMATION('','',#11,#283); +#66615 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66616); +#66616 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('87','R30','',#5,#523,$); +#66617 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66618,#66620); +#66618 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66619) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66619 = ITEM_DEFINED_TRANSFORMATION('','',#11,#287); +#66620 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66621); +#66621 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('88','R6','',#5,#523,$); +#66622 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66623,#66625); +#66623 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66624) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66624 = ITEM_DEFINED_TRANSFORMATION('','',#11,#291); +#66625 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66626); +#66626 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('89','P12','',#5,#11985,$); +#66627 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66628,#66630); +#66628 = ( REPRESENTATION_RELATIONSHIP('','',#65643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66629) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66629 = ITEM_DEFINED_TRANSFORMATION('','',#11,#295); +#66630 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66631); +#66631 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('90','C32','',#5,#65638,$); +#66632 = SHAPE_DEFINITION_REPRESENTATION(#66633,#66639); +#66633 = PRODUCT_DEFINITION_SHAPE('','',#66634); +#66634 = PRODUCT_DEFINITION('design','',#66635,#66638); +#66635 = PRODUCT_DEFINITION_FORMATION('','',#66636); +#66636 = PRODUCT('USB_C_Receptacle_GCT_USB4085', + 'USB_C_Receptacle_GCT_USB4085','',(#66637)); +#66637 = PRODUCT_CONTEXT('',#2,'mechanical'); +#66638 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#66639 = SHAPE_REPRESENTATION('',(#11,#66640),#66644); +#66640 = AXIS2_PLACEMENT_3D('',#66641,#66642,#66643); +#66641 = CARTESIAN_POINT('',(0.,0.,0.)); +#66642 = DIRECTION('',(0.,0.,1.)); +#66643 = DIRECTION('',(1.,0.,-0.)); +#66644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#66648)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#66645,#66646,#66647)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#66645 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#66646 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#66647 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#66648 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#66645, + 'distance_accuracy_value','confusion accuracy'); +#66649 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66650,#66652); +#66650 = ( REPRESENTATION_RELATIONSHIP('','',#66639,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66651) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66651 = ITEM_DEFINED_TRANSFORMATION('','',#11,#299); +#66652 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66653); +#66653 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('92','J9','',#5,#66634,$); +#66654 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#66636)); +#66655 = SHAPE_DEFINITION_REPRESENTATION(#66656,#66662); +#66656 = PRODUCT_DEFINITION_SHAPE('','',#66657); +#66657 = PRODUCT_DEFINITION('design','',#66658,#66661); +#66658 = PRODUCT_DEFINITION_FORMATION('','',#66659); +#66659 = PRODUCT('USB_C_Receptacle_GCT_USB4085', + 'USB_C_Receptacle_GCT_USB4085','',(#66660)); +#66660 = PRODUCT_CONTEXT('',#2,'mechanical'); +#66661 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#66662 = SHAPE_REPRESENTATION('',(#11,#66663,#70860,#75412,#75562,#75712 + ,#75862,#76012,#76162,#76312,#76462,#76612,#76762,#76912,#77062, + #77212,#77362,#77512,#77662,#77812,#78028,#78244,#78460,#78676, + #78892,#79108,#79324,#79540,#79756,#79972,#80188,#80404,#80620, + #80836,#81052),#81268); +#66663 = MANIFOLD_SOLID_BREP('',#66664); +#66664 = CLOSED_SHELL('',(#66665,#66865,#67002,#67027,#67052,#67109, + #67166,#67190,#67214,#67272,#67330,#67355,#67380,#67437,#67494, + #67518,#67542,#67575,#67608,#67640,#67672,#67696,#67713,#67739, + #67765,#67797,#67872,#67954,#67979,#67996,#68028,#68113,#68130, + #68184,#68201,#68288,#68313,#68330,#68347,#68364,#68376,#68393, + #68405,#68422,#68439,#68456,#68481,#68506,#68537,#68562,#68593, + #68618,#68643,#68668,#68698,#68715,#68732,#68805,#68897,#68989, + #69062,#69084,#69096,#69169,#69261,#69278,#69295,#69387,#69460, + #69477,#69494,#69511,#69528,#69545,#69562,#69586,#69610,#69634, + #69651,#69675,#69692,#69718,#69744,#69761,#69783,#69800,#69831, + #69848,#69865,#69877,#69894,#69911,#69928,#69945,#69962,#69979, + #69996,#70008,#70025,#70042,#70059,#70076,#70093,#70110,#70127, + #70139,#70161,#70178,#70209,#70226,#70248,#70260,#70272,#70303, + #70315,#70327,#70358,#70367,#70376,#70393,#70410,#70443,#70460, + #70477,#70510,#70543,#70576,#70593,#70610,#70641,#70658,#70675, + #70706,#70737,#70768,#70785,#70802,#70814,#70831,#70848)); +#66665 = ADVANCED_FACE('',(#66666,#66838,#66849),#66860,.F.); +#66666 = FACE_BOUND('',#66667,.F.); +#66667 = EDGE_LOOP('',(#66668,#66678,#66686,#66694,#66702,#66710,#66718, + #66726,#66734,#66742,#66751,#66759,#66767,#66776,#66784,#66792, + #66800,#66808,#66816,#66824,#66832)); +#66668 = ORIENTED_EDGE('',*,*,#66669,.F.); +#66669 = EDGE_CURVE('',#66670,#66672,#66674,.T.); +#66670 = VERTEX_POINT('',#66671); +#66671 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66672 = VERTEX_POINT('',#66673); +#66673 = CARTESIAN_POINT('',(-0.195,-8.61,0.29)); +#66674 = LINE('',#66675,#66676); +#66675 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66676 = VECTOR('',#66677,1.); +#66677 = DIRECTION('',(-1.,0.,0.)); +#66678 = ORIENTED_EDGE('',*,*,#66679,.T.); +#66679 = EDGE_CURVE('',#66670,#66680,#66682,.T.); +#66680 = VERTEX_POINT('',#66681); +#66681 = CARTESIAN_POINT('',(6.145,-6.16,0.29)); +#66682 = LINE('',#66683,#66684); +#66683 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66684 = VECTOR('',#66685,1.); +#66685 = DIRECTION('',(0.,1.,-2.2E-16)); +#66686 = ORIENTED_EDGE('',*,*,#66687,.F.); +#66687 = EDGE_CURVE('',#66688,#66680,#66690,.T.); +#66688 = VERTEX_POINT('',#66689); +#66689 = CARTESIAN_POINT('',(5.175,-6.16,0.29)); +#66690 = LINE('',#66691,#66692); +#66691 = CARTESIAN_POINT('',(5.66,-6.16,0.29)); +#66692 = VECTOR('',#66693,1.); +#66693 = DIRECTION('',(1.,-2.2E-16,0.)); +#66694 = ORIENTED_EDGE('',*,*,#66695,.T.); +#66695 = EDGE_CURVE('',#66688,#66696,#66698,.T.); +#66696 = VERTEX_POINT('',#66697); +#66697 = CARTESIAN_POINT('',(5.175,-3.46,0.29)); +#66698 = LINE('',#66699,#66700); +#66699 = CARTESIAN_POINT('',(5.175,-5.674370483602,0.29)); +#66700 = VECTOR('',#66701,1.); +#66701 = DIRECTION('',(2.6E-16,1.,-1.1E-16)); +#66702 = ORIENTED_EDGE('',*,*,#66703,.F.); +#66703 = EDGE_CURVE('',#66704,#66696,#66706,.T.); +#66704 = VERTEX_POINT('',#66705); +#66705 = CARTESIAN_POINT('',(6.145,-3.46,0.29)); +#66706 = LINE('',#66707,#66708); +#66707 = CARTESIAN_POINT('',(5.66,-3.46,0.29)); +#66708 = VECTOR('',#66709,1.); +#66709 = DIRECTION('',(-1.,2.2E-16,0.)); +#66710 = ORIENTED_EDGE('',*,*,#66711,.T.); +#66711 = EDGE_CURVE('',#66704,#66712,#66714,.T.); +#66712 = VERTEX_POINT('',#66713); +#66713 = CARTESIAN_POINT('',(6.145,-2.26,0.29)); +#66714 = LINE('',#66715,#66716); +#66715 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66716 = VECTOR('',#66717,1.); +#66717 = DIRECTION('',(0.,1.,-2.2E-16)); +#66718 = ORIENTED_EDGE('',*,*,#66719,.F.); +#66719 = EDGE_CURVE('',#66720,#66712,#66722,.T.); +#66720 = VERTEX_POINT('',#66721); +#66721 = CARTESIAN_POINT('',(5.175,-2.26,0.29)); +#66722 = LINE('',#66723,#66724); +#66723 = CARTESIAN_POINT('',(5.66,-2.26,0.29)); +#66724 = VECTOR('',#66725,1.); +#66725 = DIRECTION('',(1.,-2.2E-16,0.)); +#66726 = ORIENTED_EDGE('',*,*,#66727,.F.); +#66727 = EDGE_CURVE('',#66728,#66720,#66730,.T.); +#66728 = VERTEX_POINT('',#66729); +#66729 = CARTESIAN_POINT('',(4.265,-2.26,0.29)); +#66730 = LINE('',#66731,#66732); +#66731 = CARTESIAN_POINT('',(5.66,-2.26,0.29)); +#66732 = VECTOR('',#66733,1.); +#66733 = DIRECTION('',(1.,0.,0.)); +#66734 = ORIENTED_EDGE('',*,*,#66735,.F.); +#66735 = EDGE_CURVE('',#66736,#66728,#66738,.T.); +#66736 = VERTEX_POINT('',#66737); +#66737 = CARTESIAN_POINT('',(4.265,-2.66,0.29)); +#66738 = LINE('',#66739,#66740); +#66739 = CARTESIAN_POINT('',(4.265,-5.435,0.29)); +#66740 = VECTOR('',#66741,1.); +#66741 = DIRECTION('',(0.,1.,-6.7E-16)); +#66742 = ORIENTED_EDGE('',*,*,#66743,.T.); +#66743 = EDGE_CURVE('',#66736,#66744,#66746,.T.); +#66744 = VERTEX_POINT('',#66745); +#66745 = CARTESIAN_POINT('',(4.265,-3.06,0.29)); +#66746 = CIRCLE('',#66747,0.2); +#66747 = AXIS2_PLACEMENT_3D('',#66748,#66749,#66750); +#66748 = CARTESIAN_POINT('',(4.265,-2.86,0.29)); +#66749 = DIRECTION('',(0.,-1.1E-16,-1.)); +#66750 = DIRECTION('',(1.,0.,0.)); +#66751 = ORIENTED_EDGE('',*,*,#66752,.F.); +#66752 = EDGE_CURVE('',#66753,#66744,#66755,.T.); +#66753 = VERTEX_POINT('',#66754); +#66754 = CARTESIAN_POINT('',(2.975,-3.06,0.29)); +#66755 = LINE('',#66756,#66757); +#66756 = CARTESIAN_POINT('',(5.205,-3.06,0.29)); +#66757 = VECTOR('',#66758,1.); +#66758 = DIRECTION('',(1.,0.,0.)); +#66759 = ORIENTED_EDGE('',*,*,#66760,.T.); +#66760 = EDGE_CURVE('',#66753,#66761,#66763,.T.); +#66761 = VERTEX_POINT('',#66762); +#66762 = CARTESIAN_POINT('',(1.685,-3.06,0.29)); +#66763 = LINE('',#66764,#66765); +#66764 = CARTESIAN_POINT('',(3.915,-3.06,0.29)); +#66765 = VECTOR('',#66766,1.); +#66766 = DIRECTION('',(-1.,2.2E-16,0.)); +#66767 = ORIENTED_EDGE('',*,*,#66768,.T.); +#66768 = EDGE_CURVE('',#66761,#66769,#66771,.T.); +#66769 = VERTEX_POINT('',#66770); +#66770 = CARTESIAN_POINT('',(1.685,-2.66,0.29)); +#66771 = CIRCLE('',#66772,0.2); +#66772 = AXIS2_PLACEMENT_3D('',#66773,#66774,#66775); +#66773 = CARTESIAN_POINT('',(1.685,-2.86,0.29)); +#66774 = DIRECTION('',(2.2E-16,1.741711239665E-48,-1.)); +#66775 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#66776 = ORIENTED_EDGE('',*,*,#66777,.T.); +#66777 = EDGE_CURVE('',#66769,#66778,#66780,.T.); +#66778 = VERTEX_POINT('',#66779); +#66779 = CARTESIAN_POINT('',(1.685,-2.26,0.29)); +#66780 = LINE('',#66781,#66782); +#66781 = CARTESIAN_POINT('',(1.685,-5.435,0.29)); +#66782 = VECTOR('',#66783,1.); +#66783 = DIRECTION('',(2.2E-16,1.,-7.8E-16)); +#66784 = ORIENTED_EDGE('',*,*,#66785,.T.); +#66785 = EDGE_CURVE('',#66778,#66786,#66788,.T.); +#66786 = VERTEX_POINT('',#66787); +#66787 = CARTESIAN_POINT('',(0.775,-2.26,0.29)); +#66788 = LINE('',#66789,#66790); +#66789 = CARTESIAN_POINT('',(3.46,-2.26,0.29)); +#66790 = VECTOR('',#66791,1.); +#66791 = DIRECTION('',(-1.,2.2E-16,0.)); +#66792 = ORIENTED_EDGE('',*,*,#66793,.T.); +#66793 = EDGE_CURVE('',#66786,#66794,#66796,.T.); +#66794 = VERTEX_POINT('',#66795); +#66795 = CARTESIAN_POINT('',(-0.195,-2.26,0.29)); +#66796 = LINE('',#66797,#66798); +#66797 = CARTESIAN_POINT('',(3.46,-2.26,0.29)); +#66798 = VECTOR('',#66799,1.); +#66799 = DIRECTION('',(-1.,0.,0.)); +#66800 = ORIENTED_EDGE('',*,*,#66801,.F.); +#66801 = EDGE_CURVE('',#66802,#66794,#66804,.T.); +#66802 = VERTEX_POINT('',#66803); +#66803 = CARTESIAN_POINT('',(-0.195,-3.46,0.29)); +#66804 = LINE('',#66805,#66806); +#66805 = CARTESIAN_POINT('',(-0.195,-8.61,0.29)); +#66806 = VECTOR('',#66807,1.); +#66807 = DIRECTION('',(0.,1.,-2.2E-16)); +#66808 = ORIENTED_EDGE('',*,*,#66809,.T.); +#66809 = EDGE_CURVE('',#66802,#66810,#66812,.T.); +#66810 = VERTEX_POINT('',#66811); +#66811 = CARTESIAN_POINT('',(0.775,-3.46,0.29)); +#66812 = LINE('',#66813,#66814); +#66813 = CARTESIAN_POINT('',(3.46,-3.46,0.29)); +#66814 = VECTOR('',#66815,1.); +#66815 = DIRECTION('',(1.,0.,0.)); +#66816 = ORIENTED_EDGE('',*,*,#66817,.F.); +#66817 = EDGE_CURVE('',#66818,#66810,#66820,.T.); +#66818 = VERTEX_POINT('',#66819); +#66819 = CARTESIAN_POINT('',(0.775,-6.16,0.29)); +#66820 = LINE('',#66821,#66822); +#66821 = CARTESIAN_POINT('',(0.775,-5.674370483602,0.29)); +#66822 = VECTOR('',#66823,1.); +#66823 = DIRECTION('',(-4.E-17,1.,-7.8E-16)); +#66824 = ORIENTED_EDGE('',*,*,#66825,.T.); +#66825 = EDGE_CURVE('',#66818,#66826,#66828,.T.); +#66826 = VERTEX_POINT('',#66827); +#66827 = CARTESIAN_POINT('',(-0.195,-6.16,0.29)); +#66828 = LINE('',#66829,#66830); +#66829 = CARTESIAN_POINT('',(3.46,-6.16,0.29)); +#66830 = VECTOR('',#66831,1.); +#66831 = DIRECTION('',(-1.,0.,0.)); +#66832 = ORIENTED_EDGE('',*,*,#66833,.F.); +#66833 = EDGE_CURVE('',#66672,#66826,#66834,.T.); +#66834 = LINE('',#66835,#66836); +#66835 = CARTESIAN_POINT('',(-0.195,-8.61,0.29)); +#66836 = VECTOR('',#66837,1.); +#66837 = DIRECTION('',(0.,1.,-2.2E-16)); +#66838 = FACE_BOUND('',#66839,.F.); +#66839 = EDGE_LOOP('',(#66840)); +#66840 = ORIENTED_EDGE('',*,*,#66841,.T.); +#66841 = EDGE_CURVE('',#66842,#66842,#66844,.T.); +#66842 = VERTEX_POINT('',#66843); +#66843 = CARTESIAN_POINT('',(0.335,-2.85,0.29)); +#66844 = CIRCLE('',#66845,0.45); +#66845 = AXIS2_PLACEMENT_3D('',#66846,#66847,#66848); +#66846 = CARTESIAN_POINT('',(0.785,-2.85,0.29)); +#66847 = DIRECTION('',(2.2E-16,-8.9E-16,-1.)); +#66848 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#66849 = FACE_BOUND('',#66850,.F.); +#66850 = EDGE_LOOP('',(#66851)); +#66851 = ORIENTED_EDGE('',*,*,#66852,.F.); +#66852 = EDGE_CURVE('',#66853,#66853,#66855,.T.); +#66853 = VERTEX_POINT('',#66854); +#66854 = CARTESIAN_POINT('',(5.615,-2.85,0.29)); +#66855 = CIRCLE('',#66856,0.45); +#66856 = AXIS2_PLACEMENT_3D('',#66857,#66858,#66859); +#66857 = CARTESIAN_POINT('',(5.165,-2.85,0.29)); +#66858 = DIRECTION('',(-1.8901417092E-48,8.9E-16,1.)); +#66859 = DIRECTION('',(1.,-1.9E-16,1.691E-31)); +#66860 = PLANE('',#66861); +#66861 = AXIS2_PLACEMENT_3D('',#66862,#66863,#66864); +#66862 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66863 = DIRECTION('',(0.,2.2E-16,1.)); +#66864 = DIRECTION('',(-1.,0.,0.)); +#66865 = ADVANCED_FACE('',(#66866,#66927),#66997,.F.); +#66866 = FACE_BOUND('',#66867,.T.); +#66867 = EDGE_LOOP('',(#66868,#66879,#66887,#66894,#66895,#66904,#66912, + #66921)); +#66868 = ORIENTED_EDGE('',*,*,#66869,.T.); +#66869 = EDGE_CURVE('',#66870,#66872,#66874,.T.); +#66870 = VERTEX_POINT('',#66871); +#66871 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#66872 = VERTEX_POINT('',#66873); +#66873 = CARTESIAN_POINT('',(-1.495,-8.61,2.15)); +#66874 = CIRCLE('',#66875,1.3); +#66875 = AXIS2_PLACEMENT_3D('',#66876,#66877,#66878); +#66876 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#66877 = DIRECTION('',(0.,-1.,2.2E-16)); +#66878 = DIRECTION('',(1.,0.,0.)); +#66879 = ORIENTED_EDGE('',*,*,#66880,.F.); +#66880 = EDGE_CURVE('',#66881,#66872,#66883,.T.); +#66881 = VERTEX_POINT('',#66882); +#66882 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#66883 = LINE('',#66884,#66885); +#66884 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#66885 = VECTOR('',#66886,1.); +#66886 = DIRECTION('',(0.,2.2E-16,1.)); +#66887 = ORIENTED_EDGE('',*,*,#66888,.T.); +#66888 = EDGE_CURVE('',#66881,#66672,#66889,.T.); +#66889 = CIRCLE('',#66890,1.3); +#66890 = AXIS2_PLACEMENT_3D('',#66891,#66892,#66893); +#66891 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#66892 = DIRECTION('',(0.,-1.,2.2E-16)); +#66893 = DIRECTION('',(1.,0.,0.)); +#66894 = ORIENTED_EDGE('',*,*,#66669,.F.); +#66895 = ORIENTED_EDGE('',*,*,#66896,.T.); +#66896 = EDGE_CURVE('',#66670,#66897,#66899,.T.); +#66897 = VERTEX_POINT('',#66898); +#66898 = CARTESIAN_POINT('',(7.445,-8.61,1.59)); +#66899 = CIRCLE('',#66900,1.3); +#66900 = AXIS2_PLACEMENT_3D('',#66901,#66902,#66903); +#66901 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#66902 = DIRECTION('',(0.,-1.,2.2E-16)); +#66903 = DIRECTION('',(1.,0.,0.)); +#66904 = ORIENTED_EDGE('',*,*,#66905,.F.); +#66905 = EDGE_CURVE('',#66906,#66897,#66908,.T.); +#66906 = VERTEX_POINT('',#66907); +#66907 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#66908 = LINE('',#66909,#66910); +#66909 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#66910 = VECTOR('',#66911,1.); +#66911 = DIRECTION('',(0.,-2.2E-16,-1.)); +#66912 = ORIENTED_EDGE('',*,*,#66913,.T.); +#66913 = EDGE_CURVE('',#66906,#66914,#66916,.T.); +#66914 = VERTEX_POINT('',#66915); +#66915 = CARTESIAN_POINT('',(6.145,-8.61,3.45)); +#66916 = CIRCLE('',#66917,1.3); +#66917 = AXIS2_PLACEMENT_3D('',#66918,#66919,#66920); +#66918 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#66919 = DIRECTION('',(0.,-1.,2.2E-16)); +#66920 = DIRECTION('',(1.,0.,0.)); +#66921 = ORIENTED_EDGE('',*,*,#66922,.F.); +#66922 = EDGE_CURVE('',#66870,#66914,#66923,.T.); +#66923 = LINE('',#66924,#66925); +#66924 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#66925 = VECTOR('',#66926,1.); +#66926 = DIRECTION('',(1.,0.,0.)); +#66927 = FACE_BOUND('',#66928,.F.); +#66928 = EDGE_LOOP('',(#66929,#66940,#66948,#66957,#66965,#66974,#66982, + #66991)); +#66929 = ORIENTED_EDGE('',*,*,#66930,.T.); +#66930 = EDGE_CURVE('',#66931,#66933,#66935,.T.); +#66931 = VERTEX_POINT('',#66932); +#66932 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#66933 = VERTEX_POINT('',#66934); +#66934 = CARTESIAN_POINT('',(-1.195,-8.61,2.15)); +#66935 = CIRCLE('',#66936,1.); +#66936 = AXIS2_PLACEMENT_3D('',#66937,#66938,#66939); +#66937 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#66938 = DIRECTION('',(0.,-1.,2.2E-16)); +#66939 = DIRECTION('',(1.,0.,0.)); +#66940 = ORIENTED_EDGE('',*,*,#66941,.F.); +#66941 = EDGE_CURVE('',#66942,#66933,#66944,.T.); +#66942 = VERTEX_POINT('',#66943); +#66943 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#66944 = LINE('',#66945,#66946); +#66945 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#66946 = VECTOR('',#66947,1.); +#66947 = DIRECTION('',(0.,2.2E-16,1.)); +#66948 = ORIENTED_EDGE('',*,*,#66949,.T.); +#66949 = EDGE_CURVE('',#66942,#66950,#66952,.T.); +#66950 = VERTEX_POINT('',#66951); +#66951 = CARTESIAN_POINT('',(-0.195,-8.61,0.59)); +#66952 = CIRCLE('',#66953,1.); +#66953 = AXIS2_PLACEMENT_3D('',#66954,#66955,#66956); +#66954 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#66955 = DIRECTION('',(0.,-1.,2.2E-16)); +#66956 = DIRECTION('',(1.,0.,0.)); +#66957 = ORIENTED_EDGE('',*,*,#66958,.F.); +#66958 = EDGE_CURVE('',#66959,#66950,#66961,.T.); +#66959 = VERTEX_POINT('',#66960); +#66960 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#66961 = LINE('',#66962,#66963); +#66962 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#66963 = VECTOR('',#66964,1.); +#66964 = DIRECTION('',(-1.,0.,0.)); +#66965 = ORIENTED_EDGE('',*,*,#66966,.T.); +#66966 = EDGE_CURVE('',#66959,#66967,#66969,.T.); +#66967 = VERTEX_POINT('',#66968); +#66968 = CARTESIAN_POINT('',(7.145,-8.61,1.59)); +#66969 = CIRCLE('',#66970,1.); +#66970 = AXIS2_PLACEMENT_3D('',#66971,#66972,#66973); +#66971 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#66972 = DIRECTION('',(0.,-1.,2.2E-16)); +#66973 = DIRECTION('',(1.,0.,0.)); +#66974 = ORIENTED_EDGE('',*,*,#66975,.F.); +#66975 = EDGE_CURVE('',#66976,#66967,#66978,.T.); +#66976 = VERTEX_POINT('',#66977); +#66977 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#66978 = LINE('',#66979,#66980); +#66979 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#66980 = VECTOR('',#66981,1.); +#66981 = DIRECTION('',(0.,-2.2E-16,-1.)); +#66982 = ORIENTED_EDGE('',*,*,#66983,.T.); +#66983 = EDGE_CURVE('',#66976,#66984,#66986,.T.); +#66984 = VERTEX_POINT('',#66985); +#66985 = CARTESIAN_POINT('',(6.145,-8.61,3.15)); +#66986 = CIRCLE('',#66987,1.); +#66987 = AXIS2_PLACEMENT_3D('',#66988,#66989,#66990); +#66988 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#66989 = DIRECTION('',(0.,-1.,2.2E-16)); +#66990 = DIRECTION('',(1.,0.,0.)); +#66991 = ORIENTED_EDGE('',*,*,#66992,.F.); +#66992 = EDGE_CURVE('',#66931,#66984,#66993,.T.); +#66993 = LINE('',#66994,#66995); +#66994 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#66995 = VECTOR('',#66996,1.); +#66996 = DIRECTION('',(1.,0.,0.)); +#66997 = PLANE('',#66998); +#66998 = AXIS2_PLACEMENT_3D('',#66999,#67000,#67001); +#66999 = CARTESIAN_POINT('',(2.975,-8.61,1.87)); +#67000 = DIRECTION('',(0.,1.,0.)); +#67001 = DIRECTION('',(0.,-0.,1.)); +#67002 = ADVANCED_FACE('',(#67003),#67022,.T.); +#67003 = FACE_BOUND('',#67004,.T.); +#67004 = EDGE_LOOP('',(#67005,#67006,#67007,#67016)); +#67005 = ORIENTED_EDGE('',*,*,#66896,.F.); +#67006 = ORIENTED_EDGE('',*,*,#66679,.T.); +#67007 = ORIENTED_EDGE('',*,*,#67008,.T.); +#67008 = EDGE_CURVE('',#66680,#67009,#67011,.T.); +#67009 = VERTEX_POINT('',#67010); +#67010 = CARTESIAN_POINT('',(7.445,-6.16,1.59)); +#67011 = CIRCLE('',#67012,1.3); +#67012 = AXIS2_PLACEMENT_3D('',#67013,#67014,#67015); +#67013 = CARTESIAN_POINT('',(6.145,-6.16,1.59)); +#67014 = DIRECTION('',(0.,-1.,1.1E-16)); +#67015 = DIRECTION('',(1.,0.,0.)); +#67016 = ORIENTED_EDGE('',*,*,#67017,.F.); +#67017 = EDGE_CURVE('',#66897,#67009,#67018,.T.); +#67018 = LINE('',#67019,#67020); +#67019 = CARTESIAN_POINT('',(7.445,-8.61,1.59)); +#67020 = VECTOR('',#67021,1.); +#67021 = DIRECTION('',(0.,1.,-2.2E-16)); +#67022 = CYLINDRICAL_SURFACE('',#67023,1.3); +#67023 = AXIS2_PLACEMENT_3D('',#67024,#67025,#67026); +#67024 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#67025 = DIRECTION('',(0.,-1.,2.2E-16)); +#67026 = DIRECTION('',(1.,0.,0.)); +#67027 = ADVANCED_FACE('',(#67028),#67047,.T.); +#67028 = FACE_BOUND('',#67029,.T.); +#67029 = EDGE_LOOP('',(#67030,#67031,#67039,#67046)); +#67030 = ORIENTED_EDGE('',*,*,#66888,.F.); +#67031 = ORIENTED_EDGE('',*,*,#67032,.T.); +#67032 = EDGE_CURVE('',#66881,#67033,#67035,.T.); +#67033 = VERTEX_POINT('',#67034); +#67034 = CARTESIAN_POINT('',(-1.495,-6.16,1.59)); +#67035 = LINE('',#67036,#67037); +#67036 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#67037 = VECTOR('',#67038,1.); +#67038 = DIRECTION('',(0.,1.,-2.2E-16)); +#67039 = ORIENTED_EDGE('',*,*,#67040,.T.); +#67040 = EDGE_CURVE('',#67033,#66826,#67041,.T.); +#67041 = CIRCLE('',#67042,1.3); +#67042 = AXIS2_PLACEMENT_3D('',#67043,#67044,#67045); +#67043 = CARTESIAN_POINT('',(-0.195,-6.16,1.59)); +#67044 = DIRECTION('',(0.,-1.,7.8E-16)); +#67045 = DIRECTION('',(1.,0.,0.)); +#67046 = ORIENTED_EDGE('',*,*,#66833,.F.); +#67047 = CYLINDRICAL_SURFACE('',#67048,1.3); +#67048 = AXIS2_PLACEMENT_3D('',#67049,#67050,#67051); +#67049 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#67050 = DIRECTION('',(0.,-1.,2.2E-16)); +#67051 = DIRECTION('',(1.,0.,0.)); +#67052 = ADVANCED_FACE('',(#67053),#67104,.F.); +#67053 = FACE_BOUND('',#67054,.F.); +#67054 = EDGE_LOOP('',(#67055,#67063,#67064,#67065,#67073,#67081,#67089, + #67098)); +#67055 = ORIENTED_EDGE('',*,*,#67056,.F.); +#67056 = EDGE_CURVE('',#66688,#67057,#67059,.T.); +#67057 = VERTEX_POINT('',#67058); +#67058 = CARTESIAN_POINT('',(5.175,-6.16,0.59)); +#67059 = LINE('',#67060,#67061); +#67060 = CARTESIAN_POINT('',(5.175,-6.16,-1.E-02)); +#67061 = VECTOR('',#67062,1.); +#67062 = DIRECTION('',(0.,2.2E-16,1.)); +#67063 = ORIENTED_EDGE('',*,*,#66687,.T.); +#67064 = ORIENTED_EDGE('',*,*,#67008,.T.); +#67065 = ORIENTED_EDGE('',*,*,#67066,.T.); +#67066 = EDGE_CURVE('',#67009,#67067,#67069,.T.); +#67067 = VERTEX_POINT('',#67068); +#67068 = CARTESIAN_POINT('',(7.445,-6.16,1.615)); +#67069 = LINE('',#67070,#67071); +#67070 = CARTESIAN_POINT('',(7.445,-6.16,1.07)); +#67071 = VECTOR('',#67072,1.); +#67072 = DIRECTION('',(0.,3.3E-16,1.)); +#67073 = ORIENTED_EDGE('',*,*,#67074,.F.); +#67074 = EDGE_CURVE('',#67075,#67067,#67077,.T.); +#67075 = VERTEX_POINT('',#67076); +#67076 = CARTESIAN_POINT('',(7.145,-6.16,1.615)); +#67077 = LINE('',#67078,#67079); +#67078 = CARTESIAN_POINT('',(5.175,-6.16,1.615)); +#67079 = VECTOR('',#67080,1.); +#67080 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#67081 = ORIENTED_EDGE('',*,*,#67082,.F.); +#67082 = EDGE_CURVE('',#67083,#67075,#67085,.T.); +#67083 = VERTEX_POINT('',#67084); +#67084 = CARTESIAN_POINT('',(7.145,-6.16,1.59)); +#67085 = LINE('',#67086,#67087); +#67086 = CARTESIAN_POINT('',(7.145,-6.16,1.07)); +#67087 = VECTOR('',#67088,1.); +#67088 = DIRECTION('',(0.,3.3E-16,1.)); +#67089 = ORIENTED_EDGE('',*,*,#67090,.F.); +#67090 = EDGE_CURVE('',#67091,#67083,#67093,.T.); +#67091 = VERTEX_POINT('',#67092); +#67092 = CARTESIAN_POINT('',(6.145,-6.16,0.59)); +#67093 = CIRCLE('',#67094,1.); +#67094 = AXIS2_PLACEMENT_3D('',#67095,#67096,#67097); +#67095 = CARTESIAN_POINT('',(6.145,-6.16,1.59)); +#67096 = DIRECTION('',(0.,-1.,1.1E-16)); +#67097 = DIRECTION('',(1.,0.,0.)); +#67098 = ORIENTED_EDGE('',*,*,#67099,.F.); +#67099 = EDGE_CURVE('',#67057,#67091,#67100,.T.); +#67100 = LINE('',#67101,#67102); +#67101 = CARTESIAN_POINT('',(5.66,-6.16,0.59)); +#67102 = VECTOR('',#67103,1.); +#67103 = DIRECTION('',(1.,-2.2E-16,0.)); +#67104 = PLANE('',#67105); +#67105 = AXIS2_PLACEMENT_3D('',#67106,#67107,#67108); +#67106 = CARTESIAN_POINT('',(5.175,-6.16,-1.E-02)); +#67107 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#67108 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#67109 = ADVANCED_FACE('',(#67110),#67161,.F.); +#67110 = FACE_BOUND('',#67111,.T.); +#67111 = EDGE_LOOP('',(#67112,#67120,#67121,#67122,#67130,#67138,#67146, + #67155)); +#67112 = ORIENTED_EDGE('',*,*,#67113,.F.); +#67113 = EDGE_CURVE('',#66818,#67114,#67116,.T.); +#67114 = VERTEX_POINT('',#67115); +#67115 = CARTESIAN_POINT('',(0.775,-6.16,0.59)); +#67116 = LINE('',#67117,#67118); +#67117 = CARTESIAN_POINT('',(0.775,-6.16,-1.E-02)); +#67118 = VECTOR('',#67119,1.); +#67119 = DIRECTION('',(2.2E-16,2.2E-16,1.)); +#67120 = ORIENTED_EDGE('',*,*,#66825,.T.); +#67121 = ORIENTED_EDGE('',*,*,#67040,.F.); +#67122 = ORIENTED_EDGE('',*,*,#67123,.T.); +#67123 = EDGE_CURVE('',#67033,#67124,#67126,.T.); +#67124 = VERTEX_POINT('',#67125); +#67125 = CARTESIAN_POINT('',(-1.495,-6.16,1.615)); +#67126 = LINE('',#67127,#67128); +#67127 = CARTESIAN_POINT('',(-1.495,-6.16,0.79)); +#67128 = VECTOR('',#67129,1.); +#67129 = DIRECTION('',(0.,2.2E-16,1.)); +#67130 = ORIENTED_EDGE('',*,*,#67131,.F.); +#67131 = EDGE_CURVE('',#67132,#67124,#67134,.T.); +#67132 = VERTEX_POINT('',#67133); +#67133 = CARTESIAN_POINT('',(-1.195,-6.16,1.615)); +#67134 = LINE('',#67135,#67136); +#67135 = CARTESIAN_POINT('',(0.775,-6.16,1.615)); +#67136 = VECTOR('',#67137,1.); +#67137 = DIRECTION('',(-1.,0.,6.E-17)); +#67138 = ORIENTED_EDGE('',*,*,#67139,.F.); +#67139 = EDGE_CURVE('',#67140,#67132,#67142,.T.); +#67140 = VERTEX_POINT('',#67141); +#67141 = CARTESIAN_POINT('',(-1.195,-6.16,1.59)); +#67142 = LINE('',#67143,#67144); +#67143 = CARTESIAN_POINT('',(-1.195,-6.16,0.79)); +#67144 = VECTOR('',#67145,1.); +#67145 = DIRECTION('',(0.,2.2E-16,1.)); +#67146 = ORIENTED_EDGE('',*,*,#67147,.T.); +#67147 = EDGE_CURVE('',#67140,#67148,#67150,.T.); +#67148 = VERTEX_POINT('',#67149); +#67149 = CARTESIAN_POINT('',(-0.195,-6.16,0.59)); +#67150 = CIRCLE('',#67151,1.); +#67151 = AXIS2_PLACEMENT_3D('',#67152,#67153,#67154); +#67152 = CARTESIAN_POINT('',(-0.195,-6.16,1.59)); +#67153 = DIRECTION('',(0.,-1.,7.8E-16)); +#67154 = DIRECTION('',(1.,0.,0.)); +#67155 = ORIENTED_EDGE('',*,*,#67156,.F.); +#67156 = EDGE_CURVE('',#67114,#67148,#67157,.T.); +#67157 = LINE('',#67158,#67159); +#67158 = CARTESIAN_POINT('',(3.46,-6.16,0.59)); +#67159 = VECTOR('',#67160,1.); +#67160 = DIRECTION('',(-1.,0.,0.)); +#67161 = PLANE('',#67162); +#67162 = AXIS2_PLACEMENT_3D('',#67163,#67164,#67165); +#67163 = CARTESIAN_POINT('',(0.775,-6.16,-1.E-02)); +#67164 = DIRECTION('',(0.,-1.,3.3E-16)); +#67165 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#67166 = ADVANCED_FACE('',(#67167),#67185,.T.); +#67167 = FACE_BOUND('',#67168,.T.); +#67168 = EDGE_LOOP('',(#67169,#67177,#67178,#67179)); +#67169 = ORIENTED_EDGE('',*,*,#67170,.F.); +#67170 = EDGE_CURVE('',#67057,#67171,#67173,.T.); +#67171 = VERTEX_POINT('',#67172); +#67172 = CARTESIAN_POINT('',(5.175,-3.46,0.59)); +#67173 = LINE('',#67174,#67175); +#67174 = CARTESIAN_POINT('',(5.175,-5.674370483602,0.59)); +#67175 = VECTOR('',#67176,1.); +#67176 = DIRECTION('',(2.6E-16,1.,-1.1E-16)); +#67177 = ORIENTED_EDGE('',*,*,#67056,.F.); +#67178 = ORIENTED_EDGE('',*,*,#66695,.T.); +#67179 = ORIENTED_EDGE('',*,*,#67180,.F.); +#67180 = EDGE_CURVE('',#67171,#66696,#67181,.T.); +#67181 = LINE('',#67182,#67183); +#67182 = CARTESIAN_POINT('',(5.175,-3.46,1.615)); +#67183 = VECTOR('',#67184,1.); +#67184 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67185 = PLANE('',#67186); +#67186 = AXIS2_PLACEMENT_3D('',#67187,#67188,#67189); +#67187 = CARTESIAN_POINT('',(5.175,-2.738740967204,0.845590605892)); +#67188 = DIRECTION('',(1.,-2.6E-16,2.7E-16)); +#67189 = DIRECTION('',(-2.7E-16,2.2E-16,1.)); +#67190 = ADVANCED_FACE('',(#67191),#67209,.T.); +#67191 = FACE_BOUND('',#67192,.F.); +#67192 = EDGE_LOOP('',(#67193,#67201,#67202,#67203)); +#67193 = ORIENTED_EDGE('',*,*,#67194,.F.); +#67194 = EDGE_CURVE('',#67114,#67195,#67197,.T.); +#67195 = VERTEX_POINT('',#67196); +#67196 = CARTESIAN_POINT('',(0.775,-3.46,0.59)); +#67197 = LINE('',#67198,#67199); +#67198 = CARTESIAN_POINT('',(0.775,-5.674370483602,0.59)); +#67199 = VECTOR('',#67200,1.); +#67200 = DIRECTION('',(-4.E-17,1.,-7.8E-16)); +#67201 = ORIENTED_EDGE('',*,*,#67113,.F.); +#67202 = ORIENTED_EDGE('',*,*,#66817,.T.); +#67203 = ORIENTED_EDGE('',*,*,#67204,.F.); +#67204 = EDGE_CURVE('',#67195,#66810,#67205,.T.); +#67205 = LINE('',#67206,#67207); +#67206 = CARTESIAN_POINT('',(0.775,-3.46,1.615)); +#67207 = VECTOR('',#67208,1.); +#67208 = DIRECTION('',(-2.2E-16,-2.2E-16,-1.)); +#67209 = PLANE('',#67210); +#67210 = AXIS2_PLACEMENT_3D('',#67211,#67212,#67213); +#67211 = CARTESIAN_POINT('',(0.775,-2.738740967204,0.845590605892)); +#67212 = DIRECTION('',(-1.,-4.E-17,5.E-17)); +#67213 = DIRECTION('',(-5.E-17,-2.2E-16,-1.)); +#67214 = ADVANCED_FACE('',(#67215),#67267,.F.); +#67215 = FACE_BOUND('',#67216,.F.); +#67216 = EDGE_LOOP('',(#67217,#67227,#67235,#67243,#67250,#67251,#67252, + #67260)); +#67217 = ORIENTED_EDGE('',*,*,#67218,.F.); +#67218 = EDGE_CURVE('',#67219,#67221,#67223,.T.); +#67219 = VERTEX_POINT('',#67220); +#67220 = CARTESIAN_POINT('',(7.145,-3.46,1.615)); +#67221 = VERTEX_POINT('',#67222); +#67222 = CARTESIAN_POINT('',(7.145,-3.46,1.59)); +#67223 = LINE('',#67224,#67225); +#67224 = CARTESIAN_POINT('',(7.145,-3.46,1.8825)); +#67225 = VECTOR('',#67226,1.); +#67226 = DIRECTION('',(0.,-3.3E-16,-1.)); +#67227 = ORIENTED_EDGE('',*,*,#67228,.T.); +#67228 = EDGE_CURVE('',#67219,#67229,#67231,.T.); +#67229 = VERTEX_POINT('',#67230); +#67230 = CARTESIAN_POINT('',(7.445,-3.46,1.615)); +#67231 = LINE('',#67232,#67233); +#67232 = CARTESIAN_POINT('',(5.175,-3.46,1.615)); +#67233 = VECTOR('',#67234,1.); +#67234 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#67235 = ORIENTED_EDGE('',*,*,#67236,.T.); +#67236 = EDGE_CURVE('',#67229,#67237,#67239,.T.); +#67237 = VERTEX_POINT('',#67238); +#67238 = CARTESIAN_POINT('',(7.445,-3.46,1.59)); +#67239 = LINE('',#67240,#67241); +#67240 = CARTESIAN_POINT('',(7.445,-3.46,1.8825)); +#67241 = VECTOR('',#67242,1.); +#67242 = DIRECTION('',(0.,-3.3E-16,-1.)); +#67243 = ORIENTED_EDGE('',*,*,#67244,.F.); +#67244 = EDGE_CURVE('',#66704,#67237,#67245,.T.); +#67245 = CIRCLE('',#67246,1.3); +#67246 = AXIS2_PLACEMENT_3D('',#67247,#67248,#67249); +#67247 = CARTESIAN_POINT('',(6.145,-3.46,1.59)); +#67248 = DIRECTION('',(0.,-1.,1.1E-16)); +#67249 = DIRECTION('',(1.,0.,0.)); +#67250 = ORIENTED_EDGE('',*,*,#66703,.T.); +#67251 = ORIENTED_EDGE('',*,*,#67180,.F.); +#67252 = ORIENTED_EDGE('',*,*,#67253,.F.); +#67253 = EDGE_CURVE('',#67254,#67171,#67256,.T.); +#67254 = VERTEX_POINT('',#67255); +#67255 = CARTESIAN_POINT('',(6.145,-3.46,0.59)); +#67256 = LINE('',#67257,#67258); +#67257 = CARTESIAN_POINT('',(5.66,-3.46,0.59)); +#67258 = VECTOR('',#67259,1.); +#67259 = DIRECTION('',(-1.,2.2E-16,0.)); +#67260 = ORIENTED_EDGE('',*,*,#67261,.T.); +#67261 = EDGE_CURVE('',#67254,#67221,#67262,.T.); +#67262 = CIRCLE('',#67263,1.); +#67263 = AXIS2_PLACEMENT_3D('',#67264,#67265,#67266); +#67264 = CARTESIAN_POINT('',(6.145,-3.46,1.59)); +#67265 = DIRECTION('',(0.,-1.,1.1E-16)); +#67266 = DIRECTION('',(1.,0.,0.)); +#67267 = PLANE('',#67268); +#67268 = AXIS2_PLACEMENT_3D('',#67269,#67270,#67271); +#67269 = CARTESIAN_POINT('',(5.175,-3.46,1.615)); +#67270 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#67271 = DIRECTION('',(2.2E-16,-3.3E-16,-1.)); +#67272 = ADVANCED_FACE('',(#67273),#67325,.F.); +#67273 = FACE_BOUND('',#67274,.T.); +#67274 = EDGE_LOOP('',(#67275,#67285,#67293,#67301,#67308,#67309,#67310, + #67318)); +#67275 = ORIENTED_EDGE('',*,*,#67276,.F.); +#67276 = EDGE_CURVE('',#67277,#67279,#67281,.T.); +#67277 = VERTEX_POINT('',#67278); +#67278 = CARTESIAN_POINT('',(-1.195,-3.46,1.615)); +#67279 = VERTEX_POINT('',#67280); +#67280 = CARTESIAN_POINT('',(-1.195,-3.46,1.59)); +#67281 = LINE('',#67282,#67283); +#67282 = CARTESIAN_POINT('',(-1.195,-3.46,1.6025)); +#67283 = VECTOR('',#67284,1.); +#67284 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67285 = ORIENTED_EDGE('',*,*,#67286,.T.); +#67286 = EDGE_CURVE('',#67277,#67287,#67289,.T.); +#67287 = VERTEX_POINT('',#67288); +#67288 = CARTESIAN_POINT('',(-1.495,-3.46,1.615)); +#67289 = LINE('',#67290,#67291); +#67290 = CARTESIAN_POINT('',(0.775,-3.46,1.615)); +#67291 = VECTOR('',#67292,1.); +#67292 = DIRECTION('',(-1.,0.,6.E-17)); +#67293 = ORIENTED_EDGE('',*,*,#67294,.T.); +#67294 = EDGE_CURVE('',#67287,#67295,#67297,.T.); +#67295 = VERTEX_POINT('',#67296); +#67296 = CARTESIAN_POINT('',(-1.495,-3.46,1.59)); +#67297 = LINE('',#67298,#67299); +#67298 = CARTESIAN_POINT('',(-1.495,-3.46,1.6025)); +#67299 = VECTOR('',#67300,1.); +#67300 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67301 = ORIENTED_EDGE('',*,*,#67302,.T.); +#67302 = EDGE_CURVE('',#67295,#66802,#67303,.T.); +#67303 = CIRCLE('',#67304,1.3); +#67304 = AXIS2_PLACEMENT_3D('',#67305,#67306,#67307); +#67305 = CARTESIAN_POINT('',(-0.195,-3.46,1.59)); +#67306 = DIRECTION('',(0.,-1.,7.8E-16)); +#67307 = DIRECTION('',(1.,0.,0.)); +#67308 = ORIENTED_EDGE('',*,*,#66809,.T.); +#67309 = ORIENTED_EDGE('',*,*,#67204,.F.); +#67310 = ORIENTED_EDGE('',*,*,#67311,.F.); +#67311 = EDGE_CURVE('',#67312,#67195,#67314,.T.); +#67312 = VERTEX_POINT('',#67313); +#67313 = CARTESIAN_POINT('',(-0.195,-3.46,0.59)); +#67314 = LINE('',#67315,#67316); +#67315 = CARTESIAN_POINT('',(3.46,-3.46,0.59)); +#67316 = VECTOR('',#67317,1.); +#67317 = DIRECTION('',(1.,0.,0.)); +#67318 = ORIENTED_EDGE('',*,*,#67319,.F.); +#67319 = EDGE_CURVE('',#67279,#67312,#67320,.T.); +#67320 = CIRCLE('',#67321,1.); +#67321 = AXIS2_PLACEMENT_3D('',#67322,#67323,#67324); +#67322 = CARTESIAN_POINT('',(-0.195,-3.46,1.59)); +#67323 = DIRECTION('',(0.,-1.,7.8E-16)); +#67324 = DIRECTION('',(1.,0.,0.)); +#67325 = PLANE('',#67326); +#67326 = AXIS2_PLACEMENT_3D('',#67327,#67328,#67329); +#67327 = CARTESIAN_POINT('',(0.775,-3.46,1.615)); +#67328 = DIRECTION('',(0.,1.,-3.3E-16)); +#67329 = DIRECTION('',(0.,3.3E-16,1.)); +#67330 = ADVANCED_FACE('',(#67331),#67350,.T.); +#67331 = FACE_BOUND('',#67332,.T.); +#67332 = EDGE_LOOP('',(#67333,#67334,#67335,#67344)); +#67333 = ORIENTED_EDGE('',*,*,#67244,.F.); +#67334 = ORIENTED_EDGE('',*,*,#66711,.T.); +#67335 = ORIENTED_EDGE('',*,*,#67336,.T.); +#67336 = EDGE_CURVE('',#66712,#67337,#67339,.T.); +#67337 = VERTEX_POINT('',#67338); +#67338 = CARTESIAN_POINT('',(7.445,-2.26,1.59)); +#67339 = CIRCLE('',#67340,1.3); +#67340 = AXIS2_PLACEMENT_3D('',#67341,#67342,#67343); +#67341 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#67342 = DIRECTION('',(0.,-1.,1.1E-16)); +#67343 = DIRECTION('',(1.,0.,0.)); +#67344 = ORIENTED_EDGE('',*,*,#67345,.F.); +#67345 = EDGE_CURVE('',#67237,#67337,#67346,.T.); +#67346 = LINE('',#67347,#67348); +#67347 = CARTESIAN_POINT('',(7.445,-8.61,1.59)); +#67348 = VECTOR('',#67349,1.); +#67349 = DIRECTION('',(0.,1.,-2.2E-16)); +#67350 = CYLINDRICAL_SURFACE('',#67351,1.3); +#67351 = AXIS2_PLACEMENT_3D('',#67352,#67353,#67354); +#67352 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#67353 = DIRECTION('',(0.,-1.,2.2E-16)); +#67354 = DIRECTION('',(1.,0.,0.)); +#67355 = ADVANCED_FACE('',(#67356),#67375,.T.); +#67356 = FACE_BOUND('',#67357,.T.); +#67357 = EDGE_LOOP('',(#67358,#67359,#67367,#67374)); +#67358 = ORIENTED_EDGE('',*,*,#67302,.F.); +#67359 = ORIENTED_EDGE('',*,*,#67360,.T.); +#67360 = EDGE_CURVE('',#67295,#67361,#67363,.T.); +#67361 = VERTEX_POINT('',#67362); +#67362 = CARTESIAN_POINT('',(-1.495,-2.26,1.59)); +#67363 = LINE('',#67364,#67365); +#67364 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#67365 = VECTOR('',#67366,1.); +#67366 = DIRECTION('',(0.,1.,-2.2E-16)); +#67367 = ORIENTED_EDGE('',*,*,#67368,.T.); +#67368 = EDGE_CURVE('',#67361,#66794,#67369,.T.); +#67369 = CIRCLE('',#67370,1.3); +#67370 = AXIS2_PLACEMENT_3D('',#67371,#67372,#67373); +#67371 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#67372 = DIRECTION('',(0.,-1.,7.8E-16)); +#67373 = DIRECTION('',(1.,0.,0.)); +#67374 = ORIENTED_EDGE('',*,*,#66801,.F.); +#67375 = CYLINDRICAL_SURFACE('',#67376,1.3); +#67376 = AXIS2_PLACEMENT_3D('',#67377,#67378,#67379); +#67377 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#67378 = DIRECTION('',(0.,-1.,2.2E-16)); +#67379 = DIRECTION('',(1.,0.,0.)); +#67380 = ADVANCED_FACE('',(#67381),#67432,.F.); +#67381 = FACE_BOUND('',#67382,.F.); +#67382 = EDGE_LOOP('',(#67383,#67391,#67392,#67393,#67401,#67409,#67417, + #67426)); +#67383 = ORIENTED_EDGE('',*,*,#67384,.F.); +#67384 = EDGE_CURVE('',#66720,#67385,#67387,.T.); +#67385 = VERTEX_POINT('',#67386); +#67386 = CARTESIAN_POINT('',(5.175,-2.26,0.59)); +#67387 = LINE('',#67388,#67389); +#67388 = CARTESIAN_POINT('',(5.175,-2.26,-1.E-02)); +#67389 = VECTOR('',#67390,1.); +#67390 = DIRECTION('',(0.,2.2E-16,1.)); +#67391 = ORIENTED_EDGE('',*,*,#66719,.T.); +#67392 = ORIENTED_EDGE('',*,*,#67336,.T.); +#67393 = ORIENTED_EDGE('',*,*,#67394,.T.); +#67394 = EDGE_CURVE('',#67337,#67395,#67397,.T.); +#67395 = VERTEX_POINT('',#67396); +#67396 = CARTESIAN_POINT('',(7.445,-2.26,1.615)); +#67397 = LINE('',#67398,#67399); +#67398 = CARTESIAN_POINT('',(7.445,-2.26,1.07)); +#67399 = VECTOR('',#67400,1.); +#67400 = DIRECTION('',(0.,3.3E-16,1.)); +#67401 = ORIENTED_EDGE('',*,*,#67402,.F.); +#67402 = EDGE_CURVE('',#67403,#67395,#67405,.T.); +#67403 = VERTEX_POINT('',#67404); +#67404 = CARTESIAN_POINT('',(7.145,-2.26,1.615)); +#67405 = LINE('',#67406,#67407); +#67406 = CARTESIAN_POINT('',(5.175,-2.26,1.615)); +#67407 = VECTOR('',#67408,1.); +#67408 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#67409 = ORIENTED_EDGE('',*,*,#67410,.F.); +#67410 = EDGE_CURVE('',#67411,#67403,#67413,.T.); +#67411 = VERTEX_POINT('',#67412); +#67412 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#67413 = LINE('',#67414,#67415); +#67414 = CARTESIAN_POINT('',(7.145,-2.26,1.07)); +#67415 = VECTOR('',#67416,1.); +#67416 = DIRECTION('',(0.,3.3E-16,1.)); +#67417 = ORIENTED_EDGE('',*,*,#67418,.F.); +#67418 = EDGE_CURVE('',#67419,#67411,#67421,.T.); +#67419 = VERTEX_POINT('',#67420); +#67420 = CARTESIAN_POINT('',(6.145,-2.26,0.59)); +#67421 = CIRCLE('',#67422,1.); +#67422 = AXIS2_PLACEMENT_3D('',#67423,#67424,#67425); +#67423 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#67424 = DIRECTION('',(0.,-1.,1.1E-16)); +#67425 = DIRECTION('',(1.,0.,0.)); +#67426 = ORIENTED_EDGE('',*,*,#67427,.F.); +#67427 = EDGE_CURVE('',#67385,#67419,#67428,.T.); +#67428 = LINE('',#67429,#67430); +#67429 = CARTESIAN_POINT('',(5.66,-2.26,0.59)); +#67430 = VECTOR('',#67431,1.); +#67431 = DIRECTION('',(1.,-2.2E-16,0.)); +#67432 = PLANE('',#67433); +#67433 = AXIS2_PLACEMENT_3D('',#67434,#67435,#67436); +#67434 = CARTESIAN_POINT('',(5.175,-2.26,-1.E-02)); +#67435 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#67436 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#67437 = ADVANCED_FACE('',(#67438),#67489,.F.); +#67438 = FACE_BOUND('',#67439,.T.); +#67439 = EDGE_LOOP('',(#67440,#67448,#67449,#67450,#67458,#67466,#67474, + #67483)); +#67440 = ORIENTED_EDGE('',*,*,#67441,.F.); +#67441 = EDGE_CURVE('',#66786,#67442,#67444,.T.); +#67442 = VERTEX_POINT('',#67443); +#67443 = CARTESIAN_POINT('',(0.775,-2.26,0.59)); +#67444 = LINE('',#67445,#67446); +#67445 = CARTESIAN_POINT('',(0.775,-2.26,-1.E-02)); +#67446 = VECTOR('',#67447,1.); +#67447 = DIRECTION('',(2.2E-16,2.2E-16,1.)); +#67448 = ORIENTED_EDGE('',*,*,#66793,.T.); +#67449 = ORIENTED_EDGE('',*,*,#67368,.F.); +#67450 = ORIENTED_EDGE('',*,*,#67451,.T.); +#67451 = EDGE_CURVE('',#67361,#67452,#67454,.T.); +#67452 = VERTEX_POINT('',#67453); +#67453 = CARTESIAN_POINT('',(-1.495,-2.26,1.615)); +#67454 = LINE('',#67455,#67456); +#67455 = CARTESIAN_POINT('',(-1.495,-2.26,0.79)); +#67456 = VECTOR('',#67457,1.); +#67457 = DIRECTION('',(0.,2.2E-16,1.)); +#67458 = ORIENTED_EDGE('',*,*,#67459,.F.); +#67459 = EDGE_CURVE('',#67460,#67452,#67462,.T.); +#67460 = VERTEX_POINT('',#67461); +#67461 = CARTESIAN_POINT('',(-1.195,-2.26,1.615)); +#67462 = LINE('',#67463,#67464); +#67463 = CARTESIAN_POINT('',(0.775,-2.26,1.615)); +#67464 = VECTOR('',#67465,1.); +#67465 = DIRECTION('',(-1.,0.,6.E-17)); +#67466 = ORIENTED_EDGE('',*,*,#67467,.F.); +#67467 = EDGE_CURVE('',#67468,#67460,#67470,.T.); +#67468 = VERTEX_POINT('',#67469); +#67469 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#67470 = LINE('',#67471,#67472); +#67471 = CARTESIAN_POINT('',(-1.195,-2.26,0.79)); +#67472 = VECTOR('',#67473,1.); +#67473 = DIRECTION('',(0.,2.2E-16,1.)); +#67474 = ORIENTED_EDGE('',*,*,#67475,.T.); +#67475 = EDGE_CURVE('',#67468,#67476,#67478,.T.); +#67476 = VERTEX_POINT('',#67477); +#67477 = CARTESIAN_POINT('',(-0.195,-2.26,0.59)); +#67478 = CIRCLE('',#67479,1.); +#67479 = AXIS2_PLACEMENT_3D('',#67480,#67481,#67482); +#67480 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#67481 = DIRECTION('',(0.,-1.,7.8E-16)); +#67482 = DIRECTION('',(1.,0.,0.)); +#67483 = ORIENTED_EDGE('',*,*,#67484,.F.); +#67484 = EDGE_CURVE('',#67442,#67476,#67485,.T.); +#67485 = LINE('',#67486,#67487); +#67486 = CARTESIAN_POINT('',(3.46,-2.26,0.59)); +#67487 = VECTOR('',#67488,1.); +#67488 = DIRECTION('',(-1.,0.,0.)); +#67489 = PLANE('',#67490); +#67490 = AXIS2_PLACEMENT_3D('',#67491,#67492,#67493); +#67491 = CARTESIAN_POINT('',(0.775,-2.26,-1.E-02)); +#67492 = DIRECTION('',(0.,-1.,3.3E-16)); +#67493 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#67494 = ADVANCED_FACE('',(#67495),#67513,.F.); +#67495 = FACE_BOUND('',#67496,.F.); +#67496 = EDGE_LOOP('',(#67497,#67498,#67499,#67507)); +#67497 = ORIENTED_EDGE('',*,*,#66727,.T.); +#67498 = ORIENTED_EDGE('',*,*,#67384,.T.); +#67499 = ORIENTED_EDGE('',*,*,#67500,.F.); +#67500 = EDGE_CURVE('',#67501,#67385,#67503,.T.); +#67501 = VERTEX_POINT('',#67502); +#67502 = CARTESIAN_POINT('',(4.265,-2.26,0.59)); +#67503 = LINE('',#67504,#67505); +#67504 = CARTESIAN_POINT('',(5.66,-2.26,0.59)); +#67505 = VECTOR('',#67506,1.); +#67506 = DIRECTION('',(1.,0.,0.)); +#67507 = ORIENTED_EDGE('',*,*,#67508,.F.); +#67508 = EDGE_CURVE('',#66728,#67501,#67509,.T.); +#67509 = LINE('',#67510,#67511); +#67510 = CARTESIAN_POINT('',(4.265,-2.26,-1.E-02)); +#67511 = VECTOR('',#67512,1.); +#67512 = DIRECTION('',(0.,1.1E-16,1.)); +#67513 = PLANE('',#67514); +#67514 = AXIS2_PLACEMENT_3D('',#67515,#67516,#67517); +#67515 = CARTESIAN_POINT('',(5.175,-2.26,-1.E-02)); +#67516 = DIRECTION('',(0.,-1.,1.1E-16)); +#67517 = DIRECTION('',(-1.,0.,0.)); +#67518 = ADVANCED_FACE('',(#67519),#67537,.F.); +#67519 = FACE_BOUND('',#67520,.T.); +#67520 = EDGE_LOOP('',(#67521,#67522,#67523,#67531)); +#67521 = ORIENTED_EDGE('',*,*,#66785,.T.); +#67522 = ORIENTED_EDGE('',*,*,#67441,.T.); +#67523 = ORIENTED_EDGE('',*,*,#67524,.F.); +#67524 = EDGE_CURVE('',#67525,#67442,#67527,.T.); +#67525 = VERTEX_POINT('',#67526); +#67526 = CARTESIAN_POINT('',(1.685,-2.26,0.59)); +#67527 = LINE('',#67528,#67529); +#67528 = CARTESIAN_POINT('',(3.46,-2.26,0.59)); +#67529 = VECTOR('',#67530,1.); +#67530 = DIRECTION('',(-1.,2.2E-16,0.)); +#67531 = ORIENTED_EDGE('',*,*,#67532,.F.); +#67532 = EDGE_CURVE('',#66778,#67525,#67533,.T.); +#67533 = LINE('',#67534,#67535); +#67534 = CARTESIAN_POINT('',(1.685,-2.26,-1.E-02)); +#67535 = VECTOR('',#67536,1.); +#67536 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#67537 = PLANE('',#67538); +#67538 = AXIS2_PLACEMENT_3D('',#67539,#67540,#67541); +#67539 = CARTESIAN_POINT('',(0.775,-2.26,-1.E-02)); +#67540 = DIRECTION('',(-2.2E-16,-1.,1.1E-16)); +#67541 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67542 = ADVANCED_FACE('',(#67543),#67570,.T.); +#67543 = FACE_BOUND('',#67544,.T.); +#67544 = EDGE_LOOP('',(#67545,#67554,#67555,#67564)); +#67545 = ORIENTED_EDGE('',*,*,#67546,.T.); +#67546 = EDGE_CURVE('',#67547,#66728,#67549,.T.); +#67547 = VERTEX_POINT('',#67548); +#67548 = CARTESIAN_POINT('',(4.032559956043,-2.26,0.34153071713)); +#67549 = CIRCLE('',#67550,0.55); +#67550 = AXIS2_PLACEMENT_3D('',#67551,#67552,#67553); +#67551 = CARTESIAN_POINT('',(4.265,-2.26,0.84)); +#67552 = DIRECTION('',(0.,-1.,2.2E-16)); +#67553 = DIRECTION('',(1.,-3.542E-31,-1.61E-15)); +#67554 = ORIENTED_EDGE('',*,*,#66735,.F.); +#67555 = ORIENTED_EDGE('',*,*,#67556,.F.); +#67556 = EDGE_CURVE('',#67557,#66736,#67559,.T.); +#67557 = VERTEX_POINT('',#67558); +#67558 = CARTESIAN_POINT('',(4.032559956043,-2.66,0.34153071713)); +#67559 = CIRCLE('',#67560,0.55); +#67560 = AXIS2_PLACEMENT_3D('',#67561,#67562,#67563); +#67561 = CARTESIAN_POINT('',(4.265,-2.66,0.84)); +#67562 = DIRECTION('',(0.,-1.,2.2E-16)); +#67563 = DIRECTION('',(1.,-3.542E-31,-1.61E-15)); +#67564 = ORIENTED_EDGE('',*,*,#67565,.F.); +#67565 = EDGE_CURVE('',#67547,#67557,#67566,.T.); +#67566 = LINE('',#67567,#67568); +#67567 = CARTESIAN_POINT('',(4.032559956043,-5.435,0.34153071713)); +#67568 = VECTOR('',#67569,1.); +#67569 = DIRECTION('',(5.E-16,-1.,9.7E-16)); +#67570 = CYLINDRICAL_SURFACE('',#67571,0.55); +#67571 = AXIS2_PLACEMENT_3D('',#67572,#67573,#67574); +#67572 = CARTESIAN_POINT('',(4.265,-5.435,0.84)); +#67573 = DIRECTION('',(0.,-1.,2.2E-16)); +#67574 = DIRECTION('',(1.,-3.542E-31,-1.61E-15)); +#67575 = ADVANCED_FACE('',(#67576),#67603,.T.); +#67576 = FACE_BOUND('',#67577,.T.); +#67577 = EDGE_LOOP('',(#67578,#67588,#67595,#67596)); +#67578 = ORIENTED_EDGE('',*,*,#67579,.T.); +#67579 = EDGE_CURVE('',#67580,#67582,#67584,.T.); +#67580 = VERTEX_POINT('',#67581); +#67581 = CARTESIAN_POINT('',(1.917440043957,-2.26,0.34153071713)); +#67582 = VERTEX_POINT('',#67583); +#67583 = CARTESIAN_POINT('',(1.917440043957,-2.66,0.34153071713)); +#67584 = LINE('',#67585,#67586); +#67585 = CARTESIAN_POINT('',(1.917440043957,-5.435,0.34153071713)); +#67586 = VECTOR('',#67587,1.); +#67587 = DIRECTION('',(-7.2E-16,-1.,9.7E-16)); +#67588 = ORIENTED_EDGE('',*,*,#67589,.T.); +#67589 = EDGE_CURVE('',#67582,#66769,#67590,.T.); +#67590 = CIRCLE('',#67591,0.55); +#67591 = AXIS2_PLACEMENT_3D('',#67592,#67593,#67594); +#67592 = CARTESIAN_POINT('',(1.685,-2.66,0.84)); +#67593 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#67594 = DIRECTION('',(-1.,2.2E-16,-1.84E-15)); +#67595 = ORIENTED_EDGE('',*,*,#66777,.T.); +#67596 = ORIENTED_EDGE('',*,*,#67597,.F.); +#67597 = EDGE_CURVE('',#67580,#66778,#67598,.T.); +#67598 = CIRCLE('',#67599,0.55); +#67599 = AXIS2_PLACEMENT_3D('',#67600,#67601,#67602); +#67600 = CARTESIAN_POINT('',(1.685,-2.26,0.84)); +#67601 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#67602 = DIRECTION('',(-1.,2.2E-16,-1.84E-15)); +#67603 = CYLINDRICAL_SURFACE('',#67604,0.55); +#67604 = AXIS2_PLACEMENT_3D('',#67605,#67606,#67607); +#67605 = CARTESIAN_POINT('',(1.685,-5.435,0.84)); +#67606 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#67607 = DIRECTION('',(-1.,2.2E-16,-1.84E-15)); +#67608 = ADVANCED_FACE('',(#67609),#67635,.F.); +#67609 = FACE_BOUND('',#67610,.F.); +#67610 = EDGE_LOOP('',(#67611,#67619,#67628,#67634)); +#67611 = ORIENTED_EDGE('',*,*,#67612,.T.); +#67612 = EDGE_CURVE('',#66736,#67613,#67615,.T.); +#67613 = VERTEX_POINT('',#67614); +#67614 = CARTESIAN_POINT('',(4.265,-2.66,0.59)); +#67615 = LINE('',#67616,#67617); +#67616 = CARTESIAN_POINT('',(4.265,-2.66,-1.E-02)); +#67617 = VECTOR('',#67618,1.); +#67618 = DIRECTION('',(0.,1.1E-16,1.)); +#67619 = ORIENTED_EDGE('',*,*,#67620,.T.); +#67620 = EDGE_CURVE('',#67613,#67621,#67623,.T.); +#67621 = VERTEX_POINT('',#67622); +#67622 = CARTESIAN_POINT('',(4.265,-3.06,0.59)); +#67623 = CIRCLE('',#67624,0.2); +#67624 = AXIS2_PLACEMENT_3D('',#67625,#67626,#67627); +#67625 = CARTESIAN_POINT('',(4.265,-2.86,0.59)); +#67626 = DIRECTION('',(0.,-1.1E-16,-1.)); +#67627 = DIRECTION('',(1.,0.,0.)); +#67628 = ORIENTED_EDGE('',*,*,#67629,.F.); +#67629 = EDGE_CURVE('',#66744,#67621,#67630,.T.); +#67630 = LINE('',#67631,#67632); +#67631 = CARTESIAN_POINT('',(4.265,-3.06,-1.E-02)); +#67632 = VECTOR('',#67633,1.); +#67633 = DIRECTION('',(0.,1.1E-16,1.)); +#67634 = ORIENTED_EDGE('',*,*,#66743,.F.); +#67635 = CYLINDRICAL_SURFACE('',#67636,0.2); +#67636 = AXIS2_PLACEMENT_3D('',#67637,#67638,#67639); +#67637 = CARTESIAN_POINT('',(4.265,-2.86,-1.E-02)); +#67638 = DIRECTION('',(0.,-1.1E-16,-1.)); +#67639 = DIRECTION('',(1.,0.,0.)); +#67640 = ADVANCED_FACE('',(#67641),#67667,.F.); +#67641 = FACE_BOUND('',#67642,.F.); +#67642 = EDGE_LOOP('',(#67643,#67644,#67652,#67661)); +#67643 = ORIENTED_EDGE('',*,*,#66768,.F.); +#67644 = ORIENTED_EDGE('',*,*,#67645,.T.); +#67645 = EDGE_CURVE('',#66761,#67646,#67648,.T.); +#67646 = VERTEX_POINT('',#67647); +#67647 = CARTESIAN_POINT('',(1.685,-3.06,0.59)); +#67648 = LINE('',#67649,#67650); +#67649 = CARTESIAN_POINT('',(1.685,-3.06,-1.E-02)); +#67650 = VECTOR('',#67651,1.); +#67651 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#67652 = ORIENTED_EDGE('',*,*,#67653,.T.); +#67653 = EDGE_CURVE('',#67646,#67654,#67656,.T.); +#67654 = VERTEX_POINT('',#67655); +#67655 = CARTESIAN_POINT('',(1.685,-2.66,0.59)); +#67656 = CIRCLE('',#67657,0.2); +#67657 = AXIS2_PLACEMENT_3D('',#67658,#67659,#67660); +#67658 = CARTESIAN_POINT('',(1.685,-2.86,0.59)); +#67659 = DIRECTION('',(2.2E-16,1.741711239665E-48,-1.)); +#67660 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67661 = ORIENTED_EDGE('',*,*,#67662,.F.); +#67662 = EDGE_CURVE('',#66769,#67654,#67663,.T.); +#67663 = LINE('',#67664,#67665); +#67664 = CARTESIAN_POINT('',(1.685,-2.66,-1.E-02)); +#67665 = VECTOR('',#67666,1.); +#67666 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#67667 = CYLINDRICAL_SURFACE('',#67668,0.2); +#67668 = AXIS2_PLACEMENT_3D('',#67669,#67670,#67671); +#67669 = CARTESIAN_POINT('',(1.685,-2.86,-1.E-02)); +#67670 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#67671 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67672 = ADVANCED_FACE('',(#67673),#67691,.F.); +#67673 = FACE_BOUND('',#67674,.F.); +#67674 = EDGE_LOOP('',(#67675,#67676,#67677,#67685)); +#67675 = ORIENTED_EDGE('',*,*,#66752,.T.); +#67676 = ORIENTED_EDGE('',*,*,#67629,.T.); +#67677 = ORIENTED_EDGE('',*,*,#67678,.F.); +#67678 = EDGE_CURVE('',#67679,#67621,#67681,.T.); +#67679 = VERTEX_POINT('',#67680); +#67680 = CARTESIAN_POINT('',(2.975,-3.06,0.59)); +#67681 = LINE('',#67682,#67683); +#67682 = CARTESIAN_POINT('',(5.205,-3.06,0.59)); +#67683 = VECTOR('',#67684,1.); +#67684 = DIRECTION('',(1.,0.,0.)); +#67685 = ORIENTED_EDGE('',*,*,#67686,.F.); +#67686 = EDGE_CURVE('',#66753,#67679,#67687,.T.); +#67687 = LINE('',#67688,#67689); +#67688 = CARTESIAN_POINT('',(2.975,-3.06,-1.E-02)); +#67689 = VECTOR('',#67690,1.); +#67690 = DIRECTION('',(0.,1.1E-16,1.)); +#67691 = PLANE('',#67692); +#67692 = AXIS2_PLACEMENT_3D('',#67693,#67694,#67695); +#67693 = CARTESIAN_POINT('',(4.265,-3.06,-1.E-02)); +#67694 = DIRECTION('',(0.,-1.,1.1E-16)); +#67695 = DIRECTION('',(-1.,0.,0.)); +#67696 = ADVANCED_FACE('',(#67697),#67708,.F.); +#67697 = FACE_BOUND('',#67698,.T.); +#67698 = EDGE_LOOP('',(#67699,#67700,#67701,#67707)); +#67699 = ORIENTED_EDGE('',*,*,#66760,.T.); +#67700 = ORIENTED_EDGE('',*,*,#67645,.T.); +#67701 = ORIENTED_EDGE('',*,*,#67702,.F.); +#67702 = EDGE_CURVE('',#67679,#67646,#67703,.T.); +#67703 = LINE('',#67704,#67705); +#67704 = CARTESIAN_POINT('',(3.915,-3.06,0.59)); +#67705 = VECTOR('',#67706,1.); +#67706 = DIRECTION('',(-1.,2.2E-16,0.)); +#67707 = ORIENTED_EDGE('',*,*,#67686,.F.); +#67708 = PLANE('',#67709); +#67709 = AXIS2_PLACEMENT_3D('',#67710,#67711,#67712); +#67710 = CARTESIAN_POINT('',(1.685,-3.06,-1.E-02)); +#67711 = DIRECTION('',(-2.2E-16,-1.,1.1E-16)); +#67712 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67713 = ADVANCED_FACE('',(#67714),#67734,.F.); +#67714 = FACE_BOUND('',#67715,.F.); +#67715 = EDGE_LOOP('',(#67716,#67725,#67732,#67733)); +#67716 = ORIENTED_EDGE('',*,*,#67717,.T.); +#67717 = EDGE_CURVE('',#67718,#67718,#67720,.T.); +#67718 = VERTEX_POINT('',#67719); +#67719 = CARTESIAN_POINT('',(0.435,-2.85,0.19)); +#67720 = CIRCLE('',#67721,0.35); +#67721 = AXIS2_PLACEMENT_3D('',#67722,#67723,#67724); +#67722 = CARTESIAN_POINT('',(0.785,-2.85,0.19)); +#67723 = DIRECTION('',(2.2E-16,-8.9E-16,-1.)); +#67724 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#67725 = ORIENTED_EDGE('',*,*,#67726,.F.); +#67726 = EDGE_CURVE('',#66842,#67718,#67727,.T.); +#67727 = CIRCLE('',#67728,0.1); +#67728 = AXIS2_PLACEMENT_3D('',#67729,#67730,#67731); +#67729 = CARTESIAN_POINT('',(0.335,-2.85,0.19)); +#67730 = DIRECTION('',(3.E-17,1.,-8.9E-16)); +#67731 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#67732 = ORIENTED_EDGE('',*,*,#66841,.F.); +#67733 = ORIENTED_EDGE('',*,*,#67726,.T.); +#67734 = TOROIDAL_SURFACE('',#67735,0.45,0.1); +#67735 = AXIS2_PLACEMENT_3D('',#67736,#67737,#67738); +#67736 = CARTESIAN_POINT('',(0.785,-2.85,0.19)); +#67737 = DIRECTION('',(-2.2E-16,8.9E-16,1.)); +#67738 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#67739 = ADVANCED_FACE('',(#67740),#67760,.F.); +#67740 = FACE_BOUND('',#67741,.F.); +#67741 = EDGE_LOOP('',(#67742,#67751,#67752,#67753)); +#67742 = ORIENTED_EDGE('',*,*,#67743,.F.); +#67743 = EDGE_CURVE('',#66853,#67744,#67746,.T.); +#67744 = VERTEX_POINT('',#67745); +#67745 = CARTESIAN_POINT('',(5.515,-2.85,0.19)); +#67746 = CIRCLE('',#67747,0.1); +#67747 = AXIS2_PLACEMENT_3D('',#67748,#67749,#67750); +#67748 = CARTESIAN_POINT('',(5.615,-2.85,0.19)); +#67749 = DIRECTION('',(-1.9E-16,-1.,8.9E-16)); +#67750 = DIRECTION('',(1.,-1.9E-16,-1.8901417092E-48)); +#67751 = ORIENTED_EDGE('',*,*,#66852,.T.); +#67752 = ORIENTED_EDGE('',*,*,#67743,.T.); +#67753 = ORIENTED_EDGE('',*,*,#67754,.F.); +#67754 = EDGE_CURVE('',#67744,#67744,#67755,.T.); +#67755 = CIRCLE('',#67756,0.35); +#67756 = AXIS2_PLACEMENT_3D('',#67757,#67758,#67759); +#67757 = CARTESIAN_POINT('',(5.165,-2.85,0.19)); +#67758 = DIRECTION('',(-1.8901417092E-48,8.9E-16,1.)); +#67759 = DIRECTION('',(1.,-1.9E-16,1.691E-31)); +#67760 = TOROIDAL_SURFACE('',#67761,0.45,0.1); +#67761 = AXIS2_PLACEMENT_3D('',#67762,#67763,#67764); +#67762 = CARTESIAN_POINT('',(5.165,-2.85,0.19)); +#67763 = DIRECTION('',(0.,8.9E-16,1.)); +#67764 = DIRECTION('',(1.,-1.9E-16,1.691E-31)); +#67765 = ADVANCED_FACE('',(#67766),#67792,.T.); +#67766 = FACE_BOUND('',#67767,.T.); +#67767 = EDGE_LOOP('',(#67768,#67776,#67785,#67791)); +#67768 = ORIENTED_EDGE('',*,*,#67769,.T.); +#67769 = EDGE_CURVE('',#66870,#67770,#67772,.T.); +#67770 = VERTEX_POINT('',#67771); +#67771 = CARTESIAN_POINT('',(-0.195,0.53,3.45)); +#67772 = LINE('',#67773,#67774); +#67773 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#67774 = VECTOR('',#67775,1.); +#67775 = DIRECTION('',(0.,1.,-2.2E-16)); +#67776 = ORIENTED_EDGE('',*,*,#67777,.T.); +#67777 = EDGE_CURVE('',#67770,#67778,#67780,.T.); +#67778 = VERTEX_POINT('',#67779); +#67779 = CARTESIAN_POINT('',(-1.495,0.53,2.15)); +#67780 = CIRCLE('',#67781,1.3); +#67781 = AXIS2_PLACEMENT_3D('',#67782,#67783,#67784); +#67782 = CARTESIAN_POINT('',(-0.195,0.53,2.15)); +#67783 = DIRECTION('',(0.,-1.,2.2E-16)); +#67784 = DIRECTION('',(1.,0.,0.)); +#67785 = ORIENTED_EDGE('',*,*,#67786,.F.); +#67786 = EDGE_CURVE('',#66872,#67778,#67787,.T.); +#67787 = LINE('',#67788,#67789); +#67788 = CARTESIAN_POINT('',(-1.495,-8.61,2.15)); +#67789 = VECTOR('',#67790,1.); +#67790 = DIRECTION('',(0.,1.,-2.2E-16)); +#67791 = ORIENTED_EDGE('',*,*,#66869,.F.); +#67792 = CYLINDRICAL_SURFACE('',#67793,1.3); +#67793 = AXIS2_PLACEMENT_3D('',#67794,#67795,#67796); +#67794 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#67795 = DIRECTION('',(0.,-1.,2.2E-16)); +#67796 = DIRECTION('',(1.,0.,0.)); +#67797 = ADVANCED_FACE('',(#67798),#67867,.F.); +#67798 = FACE_BOUND('',#67799,.F.); +#67799 = EDGE_LOOP('',(#67800,#67801,#67802,#67803,#67811,#67819,#67825, + #67826,#67827,#67828,#67836,#67844,#67852,#67860,#67866)); +#67800 = ORIENTED_EDGE('',*,*,#66880,.F.); +#67801 = ORIENTED_EDGE('',*,*,#67032,.T.); +#67802 = ORIENTED_EDGE('',*,*,#67123,.T.); +#67803 = ORIENTED_EDGE('',*,*,#67804,.T.); +#67804 = EDGE_CURVE('',#67124,#67805,#67807,.T.); +#67805 = VERTEX_POINT('',#67806); +#67806 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#67807 = LINE('',#67808,#67809); +#67808 = CARTESIAN_POINT('',(-1.495,-7.385,1.615)); +#67809 = VECTOR('',#67810,1.); +#67810 = DIRECTION('',(0.,1.,-2.2E-16)); +#67811 = ORIENTED_EDGE('',*,*,#67812,.T.); +#67812 = EDGE_CURVE('',#67805,#67813,#67815,.T.); +#67813 = VERTEX_POINT('',#67814); +#67814 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#67815 = LINE('',#67816,#67817); +#67816 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#67817 = VECTOR('',#67818,1.); +#67818 = DIRECTION('',(5.E-16,1.,-2.2E-16)); +#67819 = ORIENTED_EDGE('',*,*,#67820,.T.); +#67820 = EDGE_CURVE('',#67813,#67287,#67821,.T.); +#67821 = LINE('',#67822,#67823); +#67822 = CARTESIAN_POINT('',(-1.495,-7.385,1.615)); +#67823 = VECTOR('',#67824,1.); +#67824 = DIRECTION('',(0.,1.,-2.2E-16)); +#67825 = ORIENTED_EDGE('',*,*,#67294,.T.); +#67826 = ORIENTED_EDGE('',*,*,#67360,.T.); +#67827 = ORIENTED_EDGE('',*,*,#67451,.T.); +#67828 = ORIENTED_EDGE('',*,*,#67829,.T.); +#67829 = EDGE_CURVE('',#67452,#67830,#67832,.T.); +#67830 = VERTEX_POINT('',#67831); +#67831 = CARTESIAN_POINT('',(-1.495,-1.73,1.615)); +#67832 = LINE('',#67833,#67834); +#67833 = CARTESIAN_POINT('',(-1.495,-5.435,1.615)); +#67834 = VECTOR('',#67835,1.); +#67835 = DIRECTION('',(0.,1.,-2.2E-16)); +#67836 = ORIENTED_EDGE('',*,*,#67837,.T.); +#67837 = EDGE_CURVE('',#67830,#67838,#67840,.T.); +#67838 = VERTEX_POINT('',#67839); +#67839 = CARTESIAN_POINT('',(-1.495,-0.63,1.615)); +#67840 = LINE('',#67841,#67842); +#67841 = CARTESIAN_POINT('',(-1.495,-5.435,1.615)); +#67842 = VECTOR('',#67843,1.); +#67843 = DIRECTION('',(0.,1.,-2.2E-16)); +#67844 = ORIENTED_EDGE('',*,*,#67845,.T.); +#67845 = EDGE_CURVE('',#67838,#67846,#67848,.T.); +#67846 = VERTEX_POINT('',#67847); +#67847 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#67848 = LINE('',#67849,#67850); +#67849 = CARTESIAN_POINT('',(-1.495,-0.63,1.6025)); +#67850 = VECTOR('',#67851,1.); +#67851 = DIRECTION('',(0.,2.2E-16,1.)); +#67852 = ORIENTED_EDGE('',*,*,#67853,.T.); +#67853 = EDGE_CURVE('',#67846,#67854,#67856,.T.); +#67854 = VERTEX_POINT('',#67855); +#67855 = CARTESIAN_POINT('',(-1.495,0.53,1.87)); +#67856 = LINE('',#67857,#67858); +#67857 = CARTESIAN_POINT('',(-1.495,-4.62,1.87)); +#67858 = VECTOR('',#67859,1.); +#67859 = DIRECTION('',(0.,1.,-2.2E-16)); +#67860 = ORIENTED_EDGE('',*,*,#67861,.T.); +#67861 = EDGE_CURVE('',#67854,#67778,#67862,.T.); +#67862 = LINE('',#67863,#67864); +#67863 = CARTESIAN_POINT('',(-1.495,0.53,1.59)); +#67864 = VECTOR('',#67865,1.); +#67865 = DIRECTION('',(0.,2.2E-16,1.)); +#67866 = ORIENTED_EDGE('',*,*,#67786,.F.); +#67867 = PLANE('',#67868); +#67868 = AXIS2_PLACEMENT_3D('',#67869,#67870,#67871); +#67869 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#67870 = DIRECTION('',(1.,0.,0.)); +#67871 = DIRECTION('',(-0.,2.2E-16,1.)); +#67872 = ADVANCED_FACE('',(#67873),#67949,.F.); +#67873 = FACE_BOUND('',#67874,.F.); +#67874 = EDGE_LOOP('',(#67875,#67876,#67884,#67892,#67900,#67908,#67916, + #67922,#67923,#67924,#67925,#67933,#67941,#67947,#67948)); +#67875 = ORIENTED_EDGE('',*,*,#66905,.F.); +#67876 = ORIENTED_EDGE('',*,*,#67877,.T.); +#67877 = EDGE_CURVE('',#66906,#67878,#67880,.T.); +#67878 = VERTEX_POINT('',#67879); +#67879 = CARTESIAN_POINT('',(7.445,0.53,2.15)); +#67880 = LINE('',#67881,#67882); +#67881 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#67882 = VECTOR('',#67883,1.); +#67883 = DIRECTION('',(0.,1.,-2.2E-16)); +#67884 = ORIENTED_EDGE('',*,*,#67885,.T.); +#67885 = EDGE_CURVE('',#67878,#67886,#67888,.T.); +#67886 = VERTEX_POINT('',#67887); +#67887 = CARTESIAN_POINT('',(7.445,0.53,1.87)); +#67888 = LINE('',#67889,#67890); +#67889 = CARTESIAN_POINT('',(7.445,0.53,2.15)); +#67890 = VECTOR('',#67891,1.); +#67891 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67892 = ORIENTED_EDGE('',*,*,#67893,.F.); +#67893 = EDGE_CURVE('',#67894,#67886,#67896,.T.); +#67894 = VERTEX_POINT('',#67895); +#67895 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#67896 = LINE('',#67897,#67898); +#67897 = CARTESIAN_POINT('',(7.445,-4.62,1.87)); +#67898 = VECTOR('',#67899,1.); +#67899 = DIRECTION('',(0.,1.,-3.3E-16)); +#67900 = ORIENTED_EDGE('',*,*,#67901,.F.); +#67901 = EDGE_CURVE('',#67902,#67894,#67904,.T.); +#67902 = VERTEX_POINT('',#67903); +#67903 = CARTESIAN_POINT('',(7.445,-0.63,1.615)); +#67904 = LINE('',#67905,#67906); +#67905 = CARTESIAN_POINT('',(7.445,-0.63,1.8825)); +#67906 = VECTOR('',#67907,1.); +#67907 = DIRECTION('',(0.,3.3E-16,1.)); +#67908 = ORIENTED_EDGE('',*,*,#67909,.F.); +#67909 = EDGE_CURVE('',#67910,#67902,#67912,.T.); +#67910 = VERTEX_POINT('',#67911); +#67911 = CARTESIAN_POINT('',(7.445,-1.73,1.615)); +#67912 = LINE('',#67913,#67914); +#67913 = CARTESIAN_POINT('',(7.445,-5.435,1.615)); +#67914 = VECTOR('',#67915,1.); +#67915 = DIRECTION('',(0.,1.,-3.3E-16)); +#67916 = ORIENTED_EDGE('',*,*,#67917,.F.); +#67917 = EDGE_CURVE('',#67395,#67910,#67918,.T.); +#67918 = LINE('',#67919,#67920); +#67919 = CARTESIAN_POINT('',(7.445,-5.435,1.615)); +#67920 = VECTOR('',#67921,1.); +#67921 = DIRECTION('',(0.,1.,-3.3E-16)); +#67922 = ORIENTED_EDGE('',*,*,#67394,.F.); +#67923 = ORIENTED_EDGE('',*,*,#67345,.F.); +#67924 = ORIENTED_EDGE('',*,*,#67236,.F.); +#67925 = ORIENTED_EDGE('',*,*,#67926,.F.); +#67926 = EDGE_CURVE('',#67927,#67229,#67929,.T.); +#67927 = VERTEX_POINT('',#67928); +#67928 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#67929 = LINE('',#67930,#67931); +#67930 = CARTESIAN_POINT('',(7.445,-7.385,1.615)); +#67931 = VECTOR('',#67932,1.); +#67932 = DIRECTION('',(0.,1.,-3.3E-16)); +#67933 = ORIENTED_EDGE('',*,*,#67934,.F.); +#67934 = EDGE_CURVE('',#67935,#67927,#67937,.T.); +#67935 = VERTEX_POINT('',#67936); +#67936 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#67937 = LINE('',#67938,#67939); +#67938 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#67939 = VECTOR('',#67940,1.); +#67940 = DIRECTION('',(2.8E-16,1.,-2.2E-16)); +#67941 = ORIENTED_EDGE('',*,*,#67942,.F.); +#67942 = EDGE_CURVE('',#67067,#67935,#67943,.T.); +#67943 = LINE('',#67944,#67945); +#67944 = CARTESIAN_POINT('',(7.445,-7.385,1.615)); +#67945 = VECTOR('',#67946,1.); +#67946 = DIRECTION('',(0.,1.,-3.3E-16)); +#67947 = ORIENTED_EDGE('',*,*,#67066,.F.); +#67948 = ORIENTED_EDGE('',*,*,#67017,.F.); +#67949 = PLANE('',#67950); +#67950 = AXIS2_PLACEMENT_3D('',#67951,#67952,#67953); +#67951 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#67952 = DIRECTION('',(-1.,0.,0.)); +#67953 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#67954 = ADVANCED_FACE('',(#67955),#67974,.T.); +#67955 = FACE_BOUND('',#67956,.T.); +#67956 = EDGE_LOOP('',(#67957,#67958,#67967,#67973)); +#67957 = ORIENTED_EDGE('',*,*,#67877,.T.); +#67958 = ORIENTED_EDGE('',*,*,#67959,.T.); +#67959 = EDGE_CURVE('',#67878,#67960,#67962,.T.); +#67960 = VERTEX_POINT('',#67961); +#67961 = CARTESIAN_POINT('',(6.145,0.53,3.45)); +#67962 = CIRCLE('',#67963,1.3); +#67963 = AXIS2_PLACEMENT_3D('',#67964,#67965,#67966); +#67964 = CARTESIAN_POINT('',(6.145,0.53,2.15)); +#67965 = DIRECTION('',(0.,-1.,2.2E-16)); +#67966 = DIRECTION('',(1.,0.,0.)); +#67967 = ORIENTED_EDGE('',*,*,#67968,.F.); +#67968 = EDGE_CURVE('',#66914,#67960,#67969,.T.); +#67969 = LINE('',#67970,#67971); +#67970 = CARTESIAN_POINT('',(6.145,-8.61,3.45)); +#67971 = VECTOR('',#67972,1.); +#67972 = DIRECTION('',(0.,1.,-2.2E-16)); +#67973 = ORIENTED_EDGE('',*,*,#66913,.F.); +#67974 = CYLINDRICAL_SURFACE('',#67975,1.3); +#67975 = AXIS2_PLACEMENT_3D('',#67976,#67977,#67978); +#67976 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#67977 = DIRECTION('',(0.,-1.,2.2E-16)); +#67978 = DIRECTION('',(1.,0.,0.)); +#67979 = ADVANCED_FACE('',(#67980),#67991,.F.); +#67980 = FACE_BOUND('',#67981,.F.); +#67981 = EDGE_LOOP('',(#67982,#67983,#67989,#67990)); +#67982 = ORIENTED_EDGE('',*,*,#67769,.T.); +#67983 = ORIENTED_EDGE('',*,*,#67984,.T.); +#67984 = EDGE_CURVE('',#67770,#67960,#67985,.T.); +#67985 = LINE('',#67986,#67987); +#67986 = CARTESIAN_POINT('',(-0.195,0.53,3.45)); +#67987 = VECTOR('',#67988,1.); +#67988 = DIRECTION('',(1.,0.,0.)); +#67989 = ORIENTED_EDGE('',*,*,#67968,.F.); +#67990 = ORIENTED_EDGE('',*,*,#66922,.F.); +#67991 = PLANE('',#67992); +#67992 = AXIS2_PLACEMENT_3D('',#67993,#67994,#67995); +#67993 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#67994 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67995 = DIRECTION('',(1.,0.,0.)); +#67996 = ADVANCED_FACE('',(#67997),#68023,.F.); +#67997 = FACE_BOUND('',#67998,.F.); +#67998 = EDGE_LOOP('',(#67999,#68007,#68016,#68022)); +#67999 = ORIENTED_EDGE('',*,*,#68000,.T.); +#68000 = EDGE_CURVE('',#66931,#68001,#68003,.T.); +#68001 = VERTEX_POINT('',#68002); +#68002 = CARTESIAN_POINT('',(-0.195,0.53,3.15)); +#68003 = LINE('',#68004,#68005); +#68004 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#68005 = VECTOR('',#68006,1.); +#68006 = DIRECTION('',(0.,1.,-2.2E-16)); +#68007 = ORIENTED_EDGE('',*,*,#68008,.T.); +#68008 = EDGE_CURVE('',#68001,#68009,#68011,.T.); +#68009 = VERTEX_POINT('',#68010); +#68010 = CARTESIAN_POINT('',(-1.195,0.53,2.15)); +#68011 = CIRCLE('',#68012,1.); +#68012 = AXIS2_PLACEMENT_3D('',#68013,#68014,#68015); +#68013 = CARTESIAN_POINT('',(-0.195,0.53,2.15)); +#68014 = DIRECTION('',(0.,-1.,2.2E-16)); +#68015 = DIRECTION('',(1.,0.,0.)); +#68016 = ORIENTED_EDGE('',*,*,#68017,.F.); +#68017 = EDGE_CURVE('',#66933,#68009,#68018,.T.); +#68018 = LINE('',#68019,#68020); +#68019 = CARTESIAN_POINT('',(-1.195,-8.61,2.15)); +#68020 = VECTOR('',#68021,1.); +#68021 = DIRECTION('',(0.,1.,-2.2E-16)); +#68022 = ORIENTED_EDGE('',*,*,#66930,.F.); +#68023 = CYLINDRICAL_SURFACE('',#68024,1.); +#68024 = AXIS2_PLACEMENT_3D('',#68025,#68026,#68027); +#68025 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#68026 = DIRECTION('',(0.,-1.,2.2E-16)); +#68027 = DIRECTION('',(1.,0.,0.)); +#68028 = ADVANCED_FACE('',(#68029),#68108,.T.); +#68029 = FACE_BOUND('',#68030,.T.); +#68030 = EDGE_LOOP('',(#68031,#68032,#68038,#68039,#68047,#68055,#68061, + #68062,#68068,#68069,#68077,#68085,#68093,#68101,#68107)); +#68031 = ORIENTED_EDGE('',*,*,#66941,.F.); +#68032 = ORIENTED_EDGE('',*,*,#68033,.T.); +#68033 = EDGE_CURVE('',#66942,#67140,#68034,.T.); +#68034 = LINE('',#68035,#68036); +#68035 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#68036 = VECTOR('',#68037,1.); +#68037 = DIRECTION('',(0.,1.,-2.2E-16)); +#68038 = ORIENTED_EDGE('',*,*,#67139,.T.); +#68039 = ORIENTED_EDGE('',*,*,#68040,.T.); +#68040 = EDGE_CURVE('',#67132,#68041,#68043,.T.); +#68041 = VERTEX_POINT('',#68042); +#68042 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#68043 = LINE('',#68044,#68045); +#68044 = CARTESIAN_POINT('',(-1.195,-7.385,1.615)); +#68045 = VECTOR('',#68046,1.); +#68046 = DIRECTION('',(0.,1.,-2.2E-16)); +#68047 = ORIENTED_EDGE('',*,*,#68048,.F.); +#68048 = EDGE_CURVE('',#68049,#68041,#68051,.T.); +#68049 = VERTEX_POINT('',#68050); +#68050 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#68051 = LINE('',#68052,#68053); +#68052 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#68053 = VECTOR('',#68054,1.); +#68054 = DIRECTION('',(-5.E-16,-1.,2.2E-16)); +#68055 = ORIENTED_EDGE('',*,*,#68056,.T.); +#68056 = EDGE_CURVE('',#68049,#67277,#68057,.T.); +#68057 = LINE('',#68058,#68059); +#68058 = CARTESIAN_POINT('',(-1.195,-7.385,1.615)); +#68059 = VECTOR('',#68060,1.); +#68060 = DIRECTION('',(0.,1.,-2.2E-16)); +#68061 = ORIENTED_EDGE('',*,*,#67276,.T.); +#68062 = ORIENTED_EDGE('',*,*,#68063,.T.); +#68063 = EDGE_CURVE('',#67279,#67468,#68064,.T.); +#68064 = LINE('',#68065,#68066); +#68065 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#68066 = VECTOR('',#68067,1.); +#68067 = DIRECTION('',(0.,1.,-2.2E-16)); +#68068 = ORIENTED_EDGE('',*,*,#67467,.T.); +#68069 = ORIENTED_EDGE('',*,*,#68070,.T.); +#68070 = EDGE_CURVE('',#67460,#68071,#68073,.T.); +#68071 = VERTEX_POINT('',#68072); +#68072 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#68073 = LINE('',#68074,#68075); +#68074 = CARTESIAN_POINT('',(-1.195,-5.435,1.615)); +#68075 = VECTOR('',#68076,1.); +#68076 = DIRECTION('',(0.,1.,-2.2E-16)); +#68077 = ORIENTED_EDGE('',*,*,#68078,.T.); +#68078 = EDGE_CURVE('',#68071,#68079,#68081,.T.); +#68079 = VERTEX_POINT('',#68080); +#68080 = CARTESIAN_POINT('',(-1.195,-0.63,1.615)); +#68081 = LINE('',#68082,#68083); +#68082 = CARTESIAN_POINT('',(-1.195,-5.435,1.615)); +#68083 = VECTOR('',#68084,1.); +#68084 = DIRECTION('',(0.,1.,-2.2E-16)); +#68085 = ORIENTED_EDGE('',*,*,#68086,.T.); +#68086 = EDGE_CURVE('',#68079,#68087,#68089,.T.); +#68087 = VERTEX_POINT('',#68088); +#68088 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#68089 = LINE('',#68090,#68091); +#68090 = CARTESIAN_POINT('',(-1.195,-0.63,1.6025)); +#68091 = VECTOR('',#68092,1.); +#68092 = DIRECTION('',(0.,2.2E-16,1.)); +#68093 = ORIENTED_EDGE('',*,*,#68094,.T.); +#68094 = EDGE_CURVE('',#68087,#68095,#68097,.T.); +#68095 = VERTEX_POINT('',#68096); +#68096 = CARTESIAN_POINT('',(-1.195,0.53,1.87)); +#68097 = LINE('',#68098,#68099); +#68098 = CARTESIAN_POINT('',(-1.195,-4.62,1.87)); +#68099 = VECTOR('',#68100,1.); +#68100 = DIRECTION('',(0.,1.,-2.2E-16)); +#68101 = ORIENTED_EDGE('',*,*,#68102,.T.); +#68102 = EDGE_CURVE('',#68095,#68009,#68103,.T.); +#68103 = LINE('',#68104,#68105); +#68104 = CARTESIAN_POINT('',(-1.195,0.53,1.59)); +#68105 = VECTOR('',#68106,1.); +#68106 = DIRECTION('',(0.,2.2E-16,1.)); +#68107 = ORIENTED_EDGE('',*,*,#68017,.F.); +#68108 = PLANE('',#68109); +#68109 = AXIS2_PLACEMENT_3D('',#68110,#68111,#68112); +#68110 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#68111 = DIRECTION('',(1.,0.,0.)); +#68112 = DIRECTION('',(-0.,2.2E-16,1.)); +#68113 = ADVANCED_FACE('',(#68114),#68125,.F.); +#68114 = FACE_BOUND('',#68115,.F.); +#68115 = EDGE_LOOP('',(#68116,#68117,#68118,#68119)); +#68116 = ORIENTED_EDGE('',*,*,#66949,.F.); +#68117 = ORIENTED_EDGE('',*,*,#68033,.T.); +#68118 = ORIENTED_EDGE('',*,*,#67147,.T.); +#68119 = ORIENTED_EDGE('',*,*,#68120,.F.); +#68120 = EDGE_CURVE('',#66950,#67148,#68121,.T.); +#68121 = LINE('',#68122,#68123); +#68122 = CARTESIAN_POINT('',(-0.195,-8.61,0.59)); +#68123 = VECTOR('',#68124,1.); +#68124 = DIRECTION('',(0.,1.,-2.2E-16)); +#68125 = CYLINDRICAL_SURFACE('',#68126,1.); +#68126 = AXIS2_PLACEMENT_3D('',#68127,#68128,#68129); +#68127 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#68128 = DIRECTION('',(0.,-1.,2.2E-16)); +#68129 = DIRECTION('',(1.,0.,0.)); +#68130 = ADVANCED_FACE('',(#68131),#68179,.T.); +#68131 = FACE_BOUND('',#68132,.T.); +#68132 = EDGE_LOOP('',(#68133,#68134,#68140,#68141,#68142,#68143,#68149, + #68150,#68151,#68157,#68158,#68159,#68160,#68161,#68167,#68168, + #68169,#68175,#68176,#68177,#68178)); +#68133 = ORIENTED_EDGE('',*,*,#66958,.F.); +#68134 = ORIENTED_EDGE('',*,*,#68135,.T.); +#68135 = EDGE_CURVE('',#66959,#67091,#68136,.T.); +#68136 = LINE('',#68137,#68138); +#68137 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#68138 = VECTOR('',#68139,1.); +#68139 = DIRECTION('',(0.,1.,-2.2E-16)); +#68140 = ORIENTED_EDGE('',*,*,#67099,.F.); +#68141 = ORIENTED_EDGE('',*,*,#67170,.T.); +#68142 = ORIENTED_EDGE('',*,*,#67253,.F.); +#68143 = ORIENTED_EDGE('',*,*,#68144,.T.); +#68144 = EDGE_CURVE('',#67254,#67419,#68145,.T.); +#68145 = LINE('',#68146,#68147); +#68146 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#68147 = VECTOR('',#68148,1.); +#68148 = DIRECTION('',(0.,1.,-2.2E-16)); +#68149 = ORIENTED_EDGE('',*,*,#67427,.F.); +#68150 = ORIENTED_EDGE('',*,*,#67500,.F.); +#68151 = ORIENTED_EDGE('',*,*,#68152,.F.); +#68152 = EDGE_CURVE('',#67613,#67501,#68153,.T.); +#68153 = LINE('',#68154,#68155); +#68154 = CARTESIAN_POINT('',(4.265,-5.435,0.59)); +#68155 = VECTOR('',#68156,1.); +#68156 = DIRECTION('',(0.,1.,-6.7E-16)); +#68157 = ORIENTED_EDGE('',*,*,#67620,.T.); +#68158 = ORIENTED_EDGE('',*,*,#67678,.F.); +#68159 = ORIENTED_EDGE('',*,*,#67702,.T.); +#68160 = ORIENTED_EDGE('',*,*,#67653,.T.); +#68161 = ORIENTED_EDGE('',*,*,#68162,.T.); +#68162 = EDGE_CURVE('',#67654,#67525,#68163,.T.); +#68163 = LINE('',#68164,#68165); +#68164 = CARTESIAN_POINT('',(1.685,-5.435,0.59)); +#68165 = VECTOR('',#68166,1.); +#68166 = DIRECTION('',(2.2E-16,1.,-7.8E-16)); +#68167 = ORIENTED_EDGE('',*,*,#67524,.T.); +#68168 = ORIENTED_EDGE('',*,*,#67484,.T.); +#68169 = ORIENTED_EDGE('',*,*,#68170,.F.); +#68170 = EDGE_CURVE('',#67312,#67476,#68171,.T.); +#68171 = LINE('',#68172,#68173); +#68172 = CARTESIAN_POINT('',(-0.195,-8.61,0.59)); +#68173 = VECTOR('',#68174,1.); +#68174 = DIRECTION('',(0.,1.,-2.2E-16)); +#68175 = ORIENTED_EDGE('',*,*,#67311,.T.); +#68176 = ORIENTED_EDGE('',*,*,#67194,.F.); +#68177 = ORIENTED_EDGE('',*,*,#67156,.T.); +#68178 = ORIENTED_EDGE('',*,*,#68120,.F.); +#68179 = PLANE('',#68180); +#68180 = AXIS2_PLACEMENT_3D('',#68181,#68182,#68183); +#68181 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#68182 = DIRECTION('',(0.,2.2E-16,1.)); +#68183 = DIRECTION('',(-1.,0.,0.)); +#68184 = ADVANCED_FACE('',(#68185),#68196,.F.); +#68185 = FACE_BOUND('',#68186,.F.); +#68186 = EDGE_LOOP('',(#68187,#68188,#68189,#68190)); +#68187 = ORIENTED_EDGE('',*,*,#66966,.F.); +#68188 = ORIENTED_EDGE('',*,*,#68135,.T.); +#68189 = ORIENTED_EDGE('',*,*,#67090,.T.); +#68190 = ORIENTED_EDGE('',*,*,#68191,.F.); +#68191 = EDGE_CURVE('',#66967,#67083,#68192,.T.); +#68192 = LINE('',#68193,#68194); +#68193 = CARTESIAN_POINT('',(7.145,-8.61,1.59)); +#68194 = VECTOR('',#68195,1.); +#68195 = DIRECTION('',(0.,1.,-2.2E-16)); +#68196 = CYLINDRICAL_SURFACE('',#68197,1.); +#68197 = AXIS2_PLACEMENT_3D('',#68198,#68199,#68200); +#68198 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#68199 = DIRECTION('',(0.,-1.,2.2E-16)); +#68200 = DIRECTION('',(1.,0.,0.)); +#68201 = ADVANCED_FACE('',(#68202),#68283,.T.); +#68202 = FACE_BOUND('',#68203,.T.); +#68203 = EDGE_LOOP('',(#68204,#68205,#68213,#68221,#68229,#68237,#68245, + #68251,#68252,#68258,#68259,#68267,#68275,#68281,#68282)); +#68204 = ORIENTED_EDGE('',*,*,#66975,.F.); +#68205 = ORIENTED_EDGE('',*,*,#68206,.T.); +#68206 = EDGE_CURVE('',#66976,#68207,#68209,.T.); +#68207 = VERTEX_POINT('',#68208); +#68208 = CARTESIAN_POINT('',(7.145,0.53,2.15)); +#68209 = LINE('',#68210,#68211); +#68210 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#68211 = VECTOR('',#68212,1.); +#68212 = DIRECTION('',(0.,1.,-2.2E-16)); +#68213 = ORIENTED_EDGE('',*,*,#68214,.T.); +#68214 = EDGE_CURVE('',#68207,#68215,#68217,.T.); +#68215 = VERTEX_POINT('',#68216); +#68216 = CARTESIAN_POINT('',(7.145,0.53,1.87)); +#68217 = LINE('',#68218,#68219); +#68218 = CARTESIAN_POINT('',(7.145,0.53,2.15)); +#68219 = VECTOR('',#68220,1.); +#68220 = DIRECTION('',(0.,-2.2E-16,-1.)); +#68221 = ORIENTED_EDGE('',*,*,#68222,.F.); +#68222 = EDGE_CURVE('',#68223,#68215,#68225,.T.); +#68223 = VERTEX_POINT('',#68224); +#68224 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#68225 = LINE('',#68226,#68227); +#68226 = CARTESIAN_POINT('',(7.145,-4.62,1.87)); +#68227 = VECTOR('',#68228,1.); +#68228 = DIRECTION('',(0.,1.,-3.3E-16)); +#68229 = ORIENTED_EDGE('',*,*,#68230,.F.); +#68230 = EDGE_CURVE('',#68231,#68223,#68233,.T.); +#68231 = VERTEX_POINT('',#68232); +#68232 = CARTESIAN_POINT('',(7.145,-0.63,1.615)); +#68233 = LINE('',#68234,#68235); +#68234 = CARTESIAN_POINT('',(7.145,-0.63,1.8825)); +#68235 = VECTOR('',#68236,1.); +#68236 = DIRECTION('',(0.,3.3E-16,1.)); +#68237 = ORIENTED_EDGE('',*,*,#68238,.F.); +#68238 = EDGE_CURVE('',#68239,#68231,#68241,.T.); +#68239 = VERTEX_POINT('',#68240); +#68240 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#68241 = LINE('',#68242,#68243); +#68242 = CARTESIAN_POINT('',(7.145,-5.435,1.615)); +#68243 = VECTOR('',#68244,1.); +#68244 = DIRECTION('',(0.,1.,-3.3E-16)); +#68245 = ORIENTED_EDGE('',*,*,#68246,.F.); +#68246 = EDGE_CURVE('',#67403,#68239,#68247,.T.); +#68247 = LINE('',#68248,#68249); +#68248 = CARTESIAN_POINT('',(7.145,-5.435,1.615)); +#68249 = VECTOR('',#68250,1.); +#68250 = DIRECTION('',(0.,1.,-3.3E-16)); +#68251 = ORIENTED_EDGE('',*,*,#67410,.F.); +#68252 = ORIENTED_EDGE('',*,*,#68253,.F.); +#68253 = EDGE_CURVE('',#67221,#67411,#68254,.T.); +#68254 = LINE('',#68255,#68256); +#68255 = CARTESIAN_POINT('',(7.145,-8.61,1.59)); +#68256 = VECTOR('',#68257,1.); +#68257 = DIRECTION('',(0.,1.,-2.2E-16)); +#68258 = ORIENTED_EDGE('',*,*,#67218,.F.); +#68259 = ORIENTED_EDGE('',*,*,#68260,.F.); +#68260 = EDGE_CURVE('',#68261,#67219,#68263,.T.); +#68261 = VERTEX_POINT('',#68262); +#68262 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#68263 = LINE('',#68264,#68265); +#68264 = CARTESIAN_POINT('',(7.145,-7.385,1.615)); +#68265 = VECTOR('',#68266,1.); +#68266 = DIRECTION('',(0.,1.,-3.3E-16)); +#68267 = ORIENTED_EDGE('',*,*,#68268,.T.); +#68268 = EDGE_CURVE('',#68261,#68269,#68271,.T.); +#68269 = VERTEX_POINT('',#68270); +#68270 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#68271 = LINE('',#68272,#68273); +#68272 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#68273 = VECTOR('',#68274,1.); +#68274 = DIRECTION('',(-2.8E-16,-1.,2.2E-16)); +#68275 = ORIENTED_EDGE('',*,*,#68276,.F.); +#68276 = EDGE_CURVE('',#67075,#68269,#68277,.T.); +#68277 = LINE('',#68278,#68279); +#68278 = CARTESIAN_POINT('',(7.145,-7.385,1.615)); +#68279 = VECTOR('',#68280,1.); +#68280 = DIRECTION('',(0.,1.,-3.3E-16)); +#68281 = ORIENTED_EDGE('',*,*,#67082,.F.); +#68282 = ORIENTED_EDGE('',*,*,#68191,.F.); +#68283 = PLANE('',#68284); +#68284 = AXIS2_PLACEMENT_3D('',#68285,#68286,#68287); +#68285 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#68286 = DIRECTION('',(-1.,0.,0.)); +#68287 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#68288 = ADVANCED_FACE('',(#68289),#68308,.F.); +#68289 = FACE_BOUND('',#68290,.F.); +#68290 = EDGE_LOOP('',(#68291,#68292,#68301,#68307)); +#68291 = ORIENTED_EDGE('',*,*,#68206,.T.); +#68292 = ORIENTED_EDGE('',*,*,#68293,.T.); +#68293 = EDGE_CURVE('',#68207,#68294,#68296,.T.); +#68294 = VERTEX_POINT('',#68295); +#68295 = CARTESIAN_POINT('',(6.145,0.53,3.15)); +#68296 = CIRCLE('',#68297,1.); +#68297 = AXIS2_PLACEMENT_3D('',#68298,#68299,#68300); +#68298 = CARTESIAN_POINT('',(6.145,0.53,2.15)); +#68299 = DIRECTION('',(0.,-1.,2.2E-16)); +#68300 = DIRECTION('',(1.,0.,0.)); +#68301 = ORIENTED_EDGE('',*,*,#68302,.F.); +#68302 = EDGE_CURVE('',#66984,#68294,#68303,.T.); +#68303 = LINE('',#68304,#68305); +#68304 = CARTESIAN_POINT('',(6.145,-8.61,3.15)); +#68305 = VECTOR('',#68306,1.); +#68306 = DIRECTION('',(0.,1.,-2.2E-16)); +#68307 = ORIENTED_EDGE('',*,*,#66983,.F.); +#68308 = CYLINDRICAL_SURFACE('',#68309,1.); +#68309 = AXIS2_PLACEMENT_3D('',#68310,#68311,#68312); +#68310 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#68311 = DIRECTION('',(0.,-1.,2.2E-16)); +#68312 = DIRECTION('',(1.,0.,0.)); +#68313 = ADVANCED_FACE('',(#68314),#68325,.T.); +#68314 = FACE_BOUND('',#68315,.T.); +#68315 = EDGE_LOOP('',(#68316,#68317,#68323,#68324)); +#68316 = ORIENTED_EDGE('',*,*,#68000,.T.); +#68317 = ORIENTED_EDGE('',*,*,#68318,.T.); +#68318 = EDGE_CURVE('',#68001,#68294,#68319,.T.); +#68319 = LINE('',#68320,#68321); +#68320 = CARTESIAN_POINT('',(-0.195,0.53,3.15)); +#68321 = VECTOR('',#68322,1.); +#68322 = DIRECTION('',(1.,0.,0.)); +#68323 = ORIENTED_EDGE('',*,*,#68302,.F.); +#68324 = ORIENTED_EDGE('',*,*,#66992,.F.); +#68325 = PLANE('',#68326); +#68326 = AXIS2_PLACEMENT_3D('',#68327,#68328,#68329); +#68327 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#68328 = DIRECTION('',(0.,-2.2E-16,-1.)); +#68329 = DIRECTION('',(1.,0.,0.)); +#68330 = ADVANCED_FACE('',(#68331),#68342,.F.); +#68331 = FACE_BOUND('',#68332,.F.); +#68332 = EDGE_LOOP('',(#68333,#68334,#68335,#68336)); +#68333 = ORIENTED_EDGE('',*,*,#68276,.F.); +#68334 = ORIENTED_EDGE('',*,*,#67074,.T.); +#68335 = ORIENTED_EDGE('',*,*,#67942,.T.); +#68336 = ORIENTED_EDGE('',*,*,#68337,.F.); +#68337 = EDGE_CURVE('',#68269,#67935,#68338,.T.); +#68338 = LINE('',#68339,#68340); +#68339 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#68340 = VECTOR('',#68341,1.); +#68341 = DIRECTION('',(1.,-2.8E-16,2.8E-16)); +#68342 = PLANE('',#68343); +#68343 = AXIS2_PLACEMENT_3D('',#68344,#68345,#68346); +#68344 = CARTESIAN_POINT('',(5.175,-6.16,1.615)); +#68345 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#68346 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68347 = ADVANCED_FACE('',(#68348),#68359,.F.); +#68348 = FACE_BOUND('',#68349,.T.); +#68349 = EDGE_LOOP('',(#68350,#68351,#68352,#68353)); +#68350 = ORIENTED_EDGE('',*,*,#68040,.F.); +#68351 = ORIENTED_EDGE('',*,*,#67131,.T.); +#68352 = ORIENTED_EDGE('',*,*,#67804,.T.); +#68353 = ORIENTED_EDGE('',*,*,#68354,.F.); +#68354 = EDGE_CURVE('',#68041,#67805,#68355,.T.); +#68355 = LINE('',#68356,#68357); +#68356 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#68357 = VECTOR('',#68358,1.); +#68358 = DIRECTION('',(-1.,5.E-16,6.E-17)); +#68359 = PLANE('',#68360); +#68360 = AXIS2_PLACEMENT_3D('',#68361,#68362,#68363); +#68361 = CARTESIAN_POINT('',(0.775,-6.16,1.615)); +#68362 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68363 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68364 = ADVANCED_FACE('',(#68365),#68371,.F.); +#68365 = FACE_BOUND('',#68366,.F.); +#68366 = EDGE_LOOP('',(#68367,#68368,#68369,#68370)); +#68367 = ORIENTED_EDGE('',*,*,#67261,.F.); +#68368 = ORIENTED_EDGE('',*,*,#68144,.T.); +#68369 = ORIENTED_EDGE('',*,*,#67418,.T.); +#68370 = ORIENTED_EDGE('',*,*,#68253,.F.); +#68371 = CYLINDRICAL_SURFACE('',#68372,1.); +#68372 = AXIS2_PLACEMENT_3D('',#68373,#68374,#68375); +#68373 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#68374 = DIRECTION('',(0.,-1.,2.2E-16)); +#68375 = DIRECTION('',(1.,0.,0.)); +#68376 = ADVANCED_FACE('',(#68377),#68388,.F.); +#68377 = FACE_BOUND('',#68378,.F.); +#68378 = EDGE_LOOP('',(#68379,#68380,#68386,#68387)); +#68379 = ORIENTED_EDGE('',*,*,#68260,.F.); +#68380 = ORIENTED_EDGE('',*,*,#68381,.F.); +#68381 = EDGE_CURVE('',#67927,#68261,#68382,.T.); +#68382 = LINE('',#68383,#68384); +#68383 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#68384 = VECTOR('',#68385,1.); +#68385 = DIRECTION('',(-1.,2.8E-16,-2.8E-16)); +#68386 = ORIENTED_EDGE('',*,*,#67926,.T.); +#68387 = ORIENTED_EDGE('',*,*,#67228,.F.); +#68388 = PLANE('',#68389); +#68389 = AXIS2_PLACEMENT_3D('',#68390,#68391,#68392); +#68390 = CARTESIAN_POINT('',(5.175,-6.16,1.615)); +#68391 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#68392 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68393 = ADVANCED_FACE('',(#68394),#68400,.F.); +#68394 = FACE_BOUND('',#68395,.F.); +#68395 = EDGE_LOOP('',(#68396,#68397,#68398,#68399)); +#68396 = ORIENTED_EDGE('',*,*,#67319,.F.); +#68397 = ORIENTED_EDGE('',*,*,#68063,.T.); +#68398 = ORIENTED_EDGE('',*,*,#67475,.T.); +#68399 = ORIENTED_EDGE('',*,*,#68170,.F.); +#68400 = CYLINDRICAL_SURFACE('',#68401,1.); +#68401 = AXIS2_PLACEMENT_3D('',#68402,#68403,#68404); +#68402 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#68403 = DIRECTION('',(0.,-1.,2.2E-16)); +#68404 = DIRECTION('',(1.,0.,0.)); +#68405 = ADVANCED_FACE('',(#68406),#68417,.F.); +#68406 = FACE_BOUND('',#68407,.T.); +#68407 = EDGE_LOOP('',(#68408,#68409,#68415,#68416)); +#68408 = ORIENTED_EDGE('',*,*,#68056,.F.); +#68409 = ORIENTED_EDGE('',*,*,#68410,.F.); +#68410 = EDGE_CURVE('',#67813,#68049,#68411,.T.); +#68411 = LINE('',#68412,#68413); +#68412 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#68413 = VECTOR('',#68414,1.); +#68414 = DIRECTION('',(1.,-5.E-16,-6.E-17)); +#68415 = ORIENTED_EDGE('',*,*,#67820,.T.); +#68416 = ORIENTED_EDGE('',*,*,#67286,.F.); +#68417 = PLANE('',#68418); +#68418 = AXIS2_PLACEMENT_3D('',#68419,#68420,#68421); +#68419 = CARTESIAN_POINT('',(0.775,-6.16,1.615)); +#68420 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68421 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68422 = ADVANCED_FACE('',(#68423),#68434,.F.); +#68423 = FACE_BOUND('',#68424,.F.); +#68424 = EDGE_LOOP('',(#68425,#68426,#68427,#68428)); +#68425 = ORIENTED_EDGE('',*,*,#68246,.F.); +#68426 = ORIENTED_EDGE('',*,*,#67402,.T.); +#68427 = ORIENTED_EDGE('',*,*,#67917,.T.); +#68428 = ORIENTED_EDGE('',*,*,#68429,.F.); +#68429 = EDGE_CURVE('',#68239,#67910,#68430,.T.); +#68430 = LINE('',#68431,#68432); +#68431 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#68432 = VECTOR('',#68433,1.); +#68433 = DIRECTION('',(1.,-2.8E-16,2.8E-16)); +#68434 = PLANE('',#68435); +#68435 = AXIS2_PLACEMENT_3D('',#68436,#68437,#68438); +#68436 = CARTESIAN_POINT('',(5.175,-2.26,1.615)); +#68437 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#68438 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68439 = ADVANCED_FACE('',(#68440),#68451,.F.); +#68440 = FACE_BOUND('',#68441,.T.); +#68441 = EDGE_LOOP('',(#68442,#68443,#68444,#68445)); +#68442 = ORIENTED_EDGE('',*,*,#68070,.F.); +#68443 = ORIENTED_EDGE('',*,*,#67459,.T.); +#68444 = ORIENTED_EDGE('',*,*,#67829,.T.); +#68445 = ORIENTED_EDGE('',*,*,#68446,.F.); +#68446 = EDGE_CURVE('',#68071,#67830,#68447,.T.); +#68447 = LINE('',#68448,#68449); +#68448 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#68449 = VECTOR('',#68450,1.); +#68450 = DIRECTION('',(-1.,5.E-16,6.E-17)); +#68451 = PLANE('',#68452); +#68452 = AXIS2_PLACEMENT_3D('',#68453,#68454,#68455); +#68453 = CARTESIAN_POINT('',(0.775,-2.26,1.615)); +#68454 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68455 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68456 = ADVANCED_FACE('',(#68457),#68476,.T.); +#68457 = FACE_BOUND('',#68458,.T.); +#68458 = EDGE_LOOP('',(#68459,#68468,#68469,#68470)); +#68459 = ORIENTED_EDGE('',*,*,#68460,.T.); +#68460 = EDGE_CURVE('',#68461,#67501,#68463,.T.); +#68461 = VERTEX_POINT('',#68462); +#68462 = CARTESIAN_POINT('',(4.159345434565,-2.26,0.613423053241)); +#68463 = CIRCLE('',#68464,0.25); +#68464 = AXIS2_PLACEMENT_3D('',#68465,#68466,#68467); +#68465 = CARTESIAN_POINT('',(4.265,-2.26,0.84)); +#68466 = DIRECTION('',(0.,-1.,2.2E-16)); +#68467 = DIRECTION('',(1.,-7.81E-31,-3.55E-15)); +#68468 = ORIENTED_EDGE('',*,*,#67508,.F.); +#68469 = ORIENTED_EDGE('',*,*,#67546,.F.); +#68470 = ORIENTED_EDGE('',*,*,#68471,.F.); +#68471 = EDGE_CURVE('',#68461,#67547,#68472,.T.); +#68472 = LINE('',#68473,#68474); +#68473 = CARTESIAN_POINT('',(3.90577447752,-2.26,6.963838101885E-02)); +#68474 = VECTOR('',#68475,1.); +#68475 = DIRECTION('',(-0.422618261741,-5.299999999998E-16, + -0.906307787037)); +#68476 = PLANE('',#68477); +#68477 = AXIS2_PLACEMENT_3D('',#68478,#68479,#68480); +#68478 = CARTESIAN_POINT('',(4.178424154425,-2.26,0.449481597152)); +#68479 = DIRECTION('',(0.,1.,-2.2E-16)); +#68480 = DIRECTION('',(0.97629600712,-4.761671506636E-17,-0.216439613938 + )); +#68481 = ADVANCED_FACE('',(#68482),#68501,.T.); +#68482 = FACE_BOUND('',#68483,.F.); +#68483 = EDGE_LOOP('',(#68484,#68493,#68494,#68495)); +#68484 = ORIENTED_EDGE('',*,*,#68485,.T.); +#68485 = EDGE_CURVE('',#68486,#67525,#68488,.T.); +#68486 = VERTEX_POINT('',#68487); +#68487 = CARTESIAN_POINT('',(1.790654565435,-2.26,0.613423053241)); +#68488 = CIRCLE('',#68489,0.25); +#68489 = AXIS2_PLACEMENT_3D('',#68490,#68491,#68492); +#68490 = CARTESIAN_POINT('',(1.685,-2.26,0.84)); +#68491 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68492 = DIRECTION('',(-1.,2.2E-16,-3.77E-15)); +#68493 = ORIENTED_EDGE('',*,*,#67532,.F.); +#68494 = ORIENTED_EDGE('',*,*,#67597,.F.); +#68495 = ORIENTED_EDGE('',*,*,#68496,.F.); +#68496 = EDGE_CURVE('',#68486,#67580,#68497,.T.); +#68497 = LINE('',#68498,#68499); +#68498 = CARTESIAN_POINT('',(2.04422552248,-2.26,6.963838101885E-02)); +#68499 = VECTOR('',#68500,1.); +#68500 = DIRECTION('',(0.422618261741,-6.299999999997E-16, + -0.906307787037)); +#68501 = PLANE('',#68502); +#68502 = AXIS2_PLACEMENT_3D('',#68503,#68504,#68505); +#68503 = CARTESIAN_POINT('',(1.771575845575,-2.26,0.449481597152)); +#68504 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68505 = DIRECTION('',(0.97629600712,-1.671684065E-16,0.216439613938)); +#68506 = ADVANCED_FACE('',(#68507),#68532,.F.); +#68507 = FACE_BOUND('',#68508,.F.); +#68508 = EDGE_LOOP('',(#68509,#68517,#68525,#68531)); +#68509 = ORIENTED_EDGE('',*,*,#68510,.F.); +#68510 = EDGE_CURVE('',#68511,#67547,#68513,.T.); +#68511 = VERTEX_POINT('',#68512); +#68512 = CARTESIAN_POINT('',(3.461607260739,-2.26,0.607770331394)); +#68513 = LINE('',#68514,#68515); +#68514 = CARTESIAN_POINT('',(3.461607260739,-2.26,0.607770331394)); +#68515 = VECTOR('',#68516,1.); +#68516 = DIRECTION('',(0.906307787037,4.999999999998E-17,-0.422618261741 + )); +#68517 = ORIENTED_EDGE('',*,*,#68518,.F.); +#68518 = EDGE_CURVE('',#68519,#68511,#68521,.T.); +#68519 = VERTEX_POINT('',#68520); +#68520 = CARTESIAN_POINT('',(3.461607260739,-2.66,0.607770331394)); +#68521 = LINE('',#68522,#68523); +#68522 = CARTESIAN_POINT('',(3.461607260739,-5.435,0.607770331394)); +#68523 = VECTOR('',#68524,1.); +#68524 = DIRECTION('',(-5.E-16,1.,-9.7E-16)); +#68525 = ORIENTED_EDGE('',*,*,#68526,.T.); +#68526 = EDGE_CURVE('',#68519,#67557,#68527,.T.); +#68527 = LINE('',#68528,#68529); +#68528 = CARTESIAN_POINT('',(3.461607260739,-2.66,0.607770331394)); +#68529 = VECTOR('',#68530,1.); +#68530 = DIRECTION('',(0.906307787037,4.999999999998E-17,-0.422618261741 + )); +#68531 = ORIENTED_EDGE('',*,*,#67565,.F.); +#68532 = PLANE('',#68533); +#68533 = AXIS2_PLACEMENT_3D('',#68534,#68535,#68536); +#68534 = CARTESIAN_POINT('',(3.461607260739,-5.435,0.607770331394)); +#68535 = DIRECTION('',(0.422618261741,1.09E-15,0.906307787037)); +#68536 = DIRECTION('',(4.998192528061E-16,-1.,9.696123863918E-16)); +#68537 = ADVANCED_FACE('',(#68538),#68557,.T.); +#68538 = FACE_BOUND('',#68539,.T.); +#68539 = EDGE_LOOP('',(#68540,#68541,#68542,#68551)); +#68540 = ORIENTED_EDGE('',*,*,#67556,.T.); +#68541 = ORIENTED_EDGE('',*,*,#67612,.T.); +#68542 = ORIENTED_EDGE('',*,*,#68543,.F.); +#68543 = EDGE_CURVE('',#68544,#67613,#68546,.T.); +#68544 = VERTEX_POINT('',#68545); +#68545 = CARTESIAN_POINT('',(4.159345434565,-2.66,0.613423053241)); +#68546 = CIRCLE('',#68547,0.25); +#68547 = AXIS2_PLACEMENT_3D('',#68548,#68549,#68550); +#68548 = CARTESIAN_POINT('',(4.265,-2.66,0.84)); +#68549 = DIRECTION('',(0.,-1.,2.2E-16)); +#68550 = DIRECTION('',(1.,-9.68E-32,-4.4E-16)); +#68551 = ORIENTED_EDGE('',*,*,#68552,.F.); +#68552 = EDGE_CURVE('',#67557,#68544,#68553,.T.); +#68553 = LINE('',#68554,#68555); +#68554 = CARTESIAN_POINT('',(3.90577447752,-2.66,6.963838101885E-02)); +#68555 = VECTOR('',#68556,1.); +#68556 = DIRECTION('',(0.422618261741,5.299999999998E-16,0.906307787037) + ); +#68557 = PLANE('',#68558); +#68558 = AXIS2_PLACEMENT_3D('',#68559,#68560,#68561); +#68559 = CARTESIAN_POINT('',(4.178424154425,-2.66,0.449481597152)); +#68560 = DIRECTION('',(0.,-1.,2.2E-16)); +#68561 = DIRECTION('',(0.97629600712,-4.761671506636E-17,-0.216439613938 + )); +#68562 = ADVANCED_FACE('',(#68563),#68588,.F.); +#68563 = FACE_BOUND('',#68564,.T.); +#68564 = EDGE_LOOP('',(#68565,#68573,#68581,#68587)); +#68565 = ORIENTED_EDGE('',*,*,#68566,.F.); +#68566 = EDGE_CURVE('',#68567,#67580,#68569,.T.); +#68567 = VERTEX_POINT('',#68568); +#68568 = CARTESIAN_POINT('',(2.488392739261,-2.26,0.607770331394)); +#68569 = LINE('',#68570,#68571); +#68570 = CARTESIAN_POINT('',(2.488392739261,-2.26,0.607770331394)); +#68571 = VECTOR('',#68572,1.); +#68572 = DIRECTION('',(-0.906307787037,2.499999999999E-16, + -0.422618261741)); +#68573 = ORIENTED_EDGE('',*,*,#68574,.F.); +#68574 = EDGE_CURVE('',#68575,#68567,#68577,.T.); +#68575 = VERTEX_POINT('',#68576); +#68576 = CARTESIAN_POINT('',(2.488392739261,-2.66,0.607770331394)); +#68577 = LINE('',#68578,#68579); +#68578 = CARTESIAN_POINT('',(2.488392739261,-5.435,0.607770331394)); +#68579 = VECTOR('',#68580,1.); +#68580 = DIRECTION('',(7.2E-16,1.,-9.7E-16)); +#68581 = ORIENTED_EDGE('',*,*,#68582,.T.); +#68582 = EDGE_CURVE('',#68575,#67582,#68583,.T.); +#68583 = LINE('',#68584,#68585); +#68584 = CARTESIAN_POINT('',(2.488392739261,-2.66,0.607770331394)); +#68585 = VECTOR('',#68586,1.); +#68586 = DIRECTION('',(-0.906307787037,2.499999999999E-16, + -0.422618261741)); +#68587 = ORIENTED_EDGE('',*,*,#67579,.F.); +#68588 = PLANE('',#68589); +#68589 = AXIS2_PLACEMENT_3D('',#68590,#68591,#68592); +#68590 = CARTESIAN_POINT('',(2.488392739261,-5.435,0.607770331394)); +#68591 = DIRECTION('',(-0.422618261741,1.179999999999E-15,0.906307787037 + )); +#68592 = DIRECTION('',(7.185615334283E-16,1.,-9.669151984819E-16)); +#68593 = ADVANCED_FACE('',(#68594),#68613,.T.); +#68594 = FACE_BOUND('',#68595,.F.); +#68595 = EDGE_LOOP('',(#68596,#68597,#68598,#68607)); +#68596 = ORIENTED_EDGE('',*,*,#67589,.T.); +#68597 = ORIENTED_EDGE('',*,*,#67662,.T.); +#68598 = ORIENTED_EDGE('',*,*,#68599,.F.); +#68599 = EDGE_CURVE('',#68600,#67654,#68602,.T.); +#68600 = VERTEX_POINT('',#68601); +#68601 = CARTESIAN_POINT('',(1.790654565435,-2.66,0.613423053241)); +#68602 = CIRCLE('',#68603,0.25); +#68603 = AXIS2_PLACEMENT_3D('',#68604,#68605,#68606); +#68604 = CARTESIAN_POINT('',(1.685,-2.66,0.84)); +#68605 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68606 = DIRECTION('',(-1.,2.2E-16,-6.7E-16)); +#68607 = ORIENTED_EDGE('',*,*,#68608,.F.); +#68608 = EDGE_CURVE('',#67582,#68600,#68609,.T.); +#68609 = LINE('',#68610,#68611); +#68610 = CARTESIAN_POINT('',(2.04422552248,-2.66,6.963838101885E-02)); +#68611 = VECTOR('',#68612,1.); +#68612 = DIRECTION('',(-0.422618261741,6.299999999997E-16,0.906307787037 + )); +#68613 = PLANE('',#68614); +#68614 = AXIS2_PLACEMENT_3D('',#68615,#68616,#68617); +#68615 = CARTESIAN_POINT('',(1.771575845575,-2.66,0.449481597152)); +#68616 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#68617 = DIRECTION('',(0.97629600712,-1.671684065E-16,0.216439613938)); +#68618 = ADVANCED_FACE('',(#68619),#68638,.T.); +#68619 = FACE_BOUND('',#68620,.T.); +#68620 = EDGE_LOOP('',(#68621,#68630,#68636,#68637)); +#68621 = ORIENTED_EDGE('',*,*,#68622,.F.); +#68622 = EDGE_CURVE('',#68623,#68623,#68625,.T.); +#68623 = VERTEX_POINT('',#68624); +#68624 = CARTESIAN_POINT('',(0.435,-2.85,9.E-02)); +#68625 = CIRCLE('',#68626,0.35); +#68626 = AXIS2_PLACEMENT_3D('',#68627,#68628,#68629); +#68627 = CARTESIAN_POINT('',(0.785,-2.85,9.E-02)); +#68628 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#68629 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#68630 = ORIENTED_EDGE('',*,*,#68631,.F.); +#68631 = EDGE_CURVE('',#67718,#68623,#68632,.T.); +#68632 = LINE('',#68633,#68634); +#68633 = CARTESIAN_POINT('',(0.435,-2.85,0.29)); +#68634 = VECTOR('',#68635,1.); +#68635 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#68636 = ORIENTED_EDGE('',*,*,#67717,.T.); +#68637 = ORIENTED_EDGE('',*,*,#68631,.T.); +#68638 = CYLINDRICAL_SURFACE('',#68639,0.35); +#68639 = AXIS2_PLACEMENT_3D('',#68640,#68641,#68642); +#68640 = CARTESIAN_POINT('',(0.785,-2.85,0.29)); +#68641 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#68642 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#68643 = ADVANCED_FACE('',(#68644),#68663,.T.); +#68644 = FACE_BOUND('',#68645,.T.); +#68645 = EDGE_LOOP('',(#68646,#68654,#68661,#68662)); +#68646 = ORIENTED_EDGE('',*,*,#68647,.T.); +#68647 = EDGE_CURVE('',#67744,#68648,#68650,.T.); +#68648 = VERTEX_POINT('',#68649); +#68649 = CARTESIAN_POINT('',(5.515,-2.85,9.E-02)); +#68650 = LINE('',#68651,#68652); +#68651 = CARTESIAN_POINT('',(5.515,-2.85,0.29)); +#68652 = VECTOR('',#68653,1.); +#68653 = DIRECTION('',(-0.,-1.1E-16,-1.)); +#68654 = ORIENTED_EDGE('',*,*,#68655,.T.); +#68655 = EDGE_CURVE('',#68648,#68648,#68656,.T.); +#68656 = CIRCLE('',#68657,0.35); +#68657 = AXIS2_PLACEMENT_3D('',#68658,#68659,#68660); +#68658 = CARTESIAN_POINT('',(5.165,-2.85,9.E-02)); +#68659 = DIRECTION('',(-1.81528329172E-49,1.1E-16,1.)); +#68660 = DIRECTION('',(1.,-3.E-17,3.3E-33)); +#68661 = ORIENTED_EDGE('',*,*,#68647,.F.); +#68662 = ORIENTED_EDGE('',*,*,#67754,.F.); +#68663 = CYLINDRICAL_SURFACE('',#68664,0.35); +#68664 = AXIS2_PLACEMENT_3D('',#68665,#68666,#68667); +#68665 = CARTESIAN_POINT('',(5.165,-2.85,0.29)); +#68666 = DIRECTION('',(0.,1.1E-16,1.)); +#68667 = DIRECTION('',(1.,0.,-0.)); +#68668 = ADVANCED_FACE('',(#68669),#68693,.T.); +#68669 = FACE_BOUND('',#68670,.T.); +#68670 = EDGE_LOOP('',(#68671,#68672,#68673,#68674,#68675,#68681,#68682, + #68683,#68684,#68685,#68686,#68692)); +#68671 = ORIENTED_EDGE('',*,*,#67777,.F.); +#68672 = ORIENTED_EDGE('',*,*,#67984,.T.); +#68673 = ORIENTED_EDGE('',*,*,#67959,.F.); +#68674 = ORIENTED_EDGE('',*,*,#67885,.T.); +#68675 = ORIENTED_EDGE('',*,*,#68676,.F.); +#68676 = EDGE_CURVE('',#68215,#67886,#68677,.T.); +#68677 = LINE('',#68678,#68679); +#68678 = CARTESIAN_POINT('',(5.175,0.53,1.87)); +#68679 = VECTOR('',#68680,1.); +#68680 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#68681 = ORIENTED_EDGE('',*,*,#68214,.F.); +#68682 = ORIENTED_EDGE('',*,*,#68293,.T.); +#68683 = ORIENTED_EDGE('',*,*,#68318,.F.); +#68684 = ORIENTED_EDGE('',*,*,#68008,.T.); +#68685 = ORIENTED_EDGE('',*,*,#68102,.F.); +#68686 = ORIENTED_EDGE('',*,*,#68687,.T.); +#68687 = EDGE_CURVE('',#68095,#67854,#68688,.T.); +#68688 = LINE('',#68689,#68690); +#68689 = CARTESIAN_POINT('',(0.775,0.53,1.87)); +#68690 = VECTOR('',#68691,1.); +#68691 = DIRECTION('',(-1.,0.,6.E-17)); +#68692 = ORIENTED_EDGE('',*,*,#67861,.T.); +#68693 = PLANE('',#68694); +#68694 = AXIS2_PLACEMENT_3D('',#68695,#68696,#68697); +#68695 = CARTESIAN_POINT('',(2.975,0.53,1.87)); +#68696 = DIRECTION('',(0.,1.,0.)); +#68697 = DIRECTION('',(0.,-0.,1.)); +#68698 = ADVANCED_FACE('',(#68699),#68710,.F.); +#68699 = FACE_BOUND('',#68700,.T.); +#68700 = EDGE_LOOP('',(#68701,#68702,#68708,#68709)); +#68701 = ORIENTED_EDGE('',*,*,#68094,.F.); +#68702 = ORIENTED_EDGE('',*,*,#68703,.T.); +#68703 = EDGE_CURVE('',#68087,#67846,#68704,.T.); +#68704 = LINE('',#68705,#68706); +#68705 = CARTESIAN_POINT('',(0.775,-0.63,1.87)); +#68706 = VECTOR('',#68707,1.); +#68707 = DIRECTION('',(-1.,0.,6.E-17)); +#68708 = ORIENTED_EDGE('',*,*,#67853,.T.); +#68709 = ORIENTED_EDGE('',*,*,#68687,.F.); +#68710 = PLANE('',#68711); +#68711 = AXIS2_PLACEMENT_3D('',#68712,#68713,#68714); +#68712 = CARTESIAN_POINT('',(0.775,-0.63,1.87)); +#68713 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68714 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68715 = ADVANCED_FACE('',(#68716),#68727,.F.); +#68716 = FACE_BOUND('',#68717,.T.); +#68717 = EDGE_LOOP('',(#68718,#68719,#68725,#68726)); +#68718 = ORIENTED_EDGE('',*,*,#68086,.F.); +#68719 = ORIENTED_EDGE('',*,*,#68720,.T.); +#68720 = EDGE_CURVE('',#68079,#67838,#68721,.T.); +#68721 = LINE('',#68722,#68723); +#68722 = CARTESIAN_POINT('',(0.775,-0.63,1.615)); +#68723 = VECTOR('',#68724,1.); +#68724 = DIRECTION('',(-1.,0.,6.E-17)); +#68725 = ORIENTED_EDGE('',*,*,#67845,.T.); +#68726 = ORIENTED_EDGE('',*,*,#68703,.F.); +#68727 = PLANE('',#68728); +#68728 = AXIS2_PLACEMENT_3D('',#68729,#68730,#68731); +#68729 = CARTESIAN_POINT('',(0.775,-0.63,1.615)); +#68730 = DIRECTION('',(0.,-1.,3.3E-16)); +#68731 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#68732 = ADVANCED_FACE('',(#68733),#68800,.T.); +#68733 = FACE_BOUND('',#68734,.F.); +#68734 = EDGE_LOOP('',(#68735,#68745,#68753,#68761,#68767,#68768,#68776, + #68785,#68793)); +#68735 = ORIENTED_EDGE('',*,*,#68736,.F.); +#68736 = EDGE_CURVE('',#68737,#68739,#68741,.T.); +#68737 = VERTEX_POINT('',#68738); +#68738 = CARTESIAN_POINT('',(-1.495,-0.23,0.885)); +#68739 = VERTEX_POINT('',#68740); +#68740 = CARTESIAN_POINT('',(-1.495,-0.23,-1.91)); +#68741 = LINE('',#68742,#68743); +#68742 = CARTESIAN_POINT('',(-1.495,-0.23,1.615)); +#68743 = VECTOR('',#68744,1.); +#68744 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68745 = ORIENTED_EDGE('',*,*,#68746,.F.); +#68746 = EDGE_CURVE('',#68747,#68737,#68749,.T.); +#68747 = VERTEX_POINT('',#68748); +#68748 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#68749 = LINE('',#68750,#68751); +#68750 = CARTESIAN_POINT('',(-1.495,-0.23,1.615)); +#68751 = VECTOR('',#68752,1.); +#68752 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68753 = ORIENTED_EDGE('',*,*,#68754,.F.); +#68754 = EDGE_CURVE('',#68755,#68747,#68757,.T.); +#68755 = VERTEX_POINT('',#68756); +#68756 = CARTESIAN_POINT('',(-1.495,-0.63,1.285)); +#68757 = LINE('',#68758,#68759); +#68758 = CARTESIAN_POINT('',(-1.495,-1.73,1.285)); +#68759 = VECTOR('',#68760,1.); +#68760 = DIRECTION('',(5.E-16,1.,-2.2E-16)); +#68761 = ORIENTED_EDGE('',*,*,#68762,.F.); +#68762 = EDGE_CURVE('',#67838,#68755,#68763,.T.); +#68763 = LINE('',#68764,#68765); +#68764 = CARTESIAN_POINT('',(-1.495,-0.63,1.615)); +#68765 = VECTOR('',#68766,1.); +#68766 = DIRECTION('',(2.2E-16,-6.7E-16,-1.)); +#68767 = ORIENTED_EDGE('',*,*,#67837,.F.); +#68768 = ORIENTED_EDGE('',*,*,#68769,.T.); +#68769 = EDGE_CURVE('',#67830,#68770,#68772,.T.); +#68770 = VERTEX_POINT('',#68771); +#68771 = CARTESIAN_POINT('',(-1.495,-1.73,-1.91)); +#68772 = LINE('',#68773,#68774); +#68773 = CARTESIAN_POINT('',(-1.495,-1.73,1.615)); +#68774 = VECTOR('',#68775,1.); +#68775 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68776 = ORIENTED_EDGE('',*,*,#68777,.T.); +#68777 = EDGE_CURVE('',#68770,#68778,#68780,.T.); +#68778 = VERTEX_POINT('',#68779); +#68779 = CARTESIAN_POINT('',(-1.495,-1.53,-2.11)); +#68780 = CIRCLE('',#68781,0.2); +#68781 = AXIS2_PLACEMENT_3D('',#68782,#68783,#68784); +#68782 = CARTESIAN_POINT('',(-1.495,-1.53,-1.91)); +#68783 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#68784 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68785 = ORIENTED_EDGE('',*,*,#68786,.T.); +#68786 = EDGE_CURVE('',#68778,#68787,#68789,.T.); +#68787 = VERTEX_POINT('',#68788); +#68788 = CARTESIAN_POINT('',(-1.495,-0.43,-2.11)); +#68789 = LINE('',#68790,#68791); +#68790 = CARTESIAN_POINT('',(-1.495,-1.73,-2.11)); +#68791 = VECTOR('',#68792,1.); +#68792 = DIRECTION('',(5.E-16,1.,-2.2E-16)); +#68793 = ORIENTED_EDGE('',*,*,#68794,.F.); +#68794 = EDGE_CURVE('',#68739,#68787,#68795,.T.); +#68795 = CIRCLE('',#68796,0.2); +#68796 = AXIS2_PLACEMENT_3D('',#68797,#68798,#68799); +#68797 = CARTESIAN_POINT('',(-1.495,-0.43,-1.91)); +#68798 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#68799 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#68800 = PLANE('',#68801); +#68801 = AXIS2_PLACEMENT_3D('',#68802,#68803,#68804); +#68802 = CARTESIAN_POINT('',(-1.495,-1.73,1.615)); +#68803 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#68804 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#68805 = ADVANCED_FACE('',(#68806),#68892,.T.); +#68806 = FACE_BOUND('',#68807,.F.); +#68807 = EDGE_LOOP('',(#68808,#68816,#68817,#68825,#68834,#68842,#68851, + #68860,#68868,#68877,#68885)); +#68808 = ORIENTED_EDGE('',*,*,#68809,.F.); +#68809 = EDGE_CURVE('',#67813,#68810,#68812,.T.); +#68810 = VERTEX_POINT('',#68811); +#68811 = CARTESIAN_POINT('',(-1.495,-3.96,-0.61)); +#68812 = LINE('',#68813,#68814); +#68813 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#68814 = VECTOR('',#68815,1.); +#68815 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68816 = ORIENTED_EDGE('',*,*,#67812,.F.); +#68817 = ORIENTED_EDGE('',*,*,#68818,.T.); +#68818 = EDGE_CURVE('',#67805,#68819,#68821,.T.); +#68819 = VERTEX_POINT('',#68820); +#68820 = CARTESIAN_POINT('',(-1.495,-5.56,0.19)); +#68821 = LINE('',#68822,#68823); +#68822 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#68823 = VECTOR('',#68824,1.); +#68824 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68825 = ORIENTED_EDGE('',*,*,#68826,.T.); +#68826 = EDGE_CURVE('',#68819,#68827,#68829,.T.); +#68827 = VERTEX_POINT('',#68828); +#68828 = CARTESIAN_POINT('',(-1.495,-5.36,-1.E-02)); +#68829 = CIRCLE('',#68830,0.2); +#68830 = AXIS2_PLACEMENT_3D('',#68831,#68832,#68833); +#68831 = CARTESIAN_POINT('',(-1.495,-5.36,0.19)); +#68832 = DIRECTION('',(1.,0.,-6.E-17)); +#68833 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#68834 = ORIENTED_EDGE('',*,*,#68835,.T.); +#68835 = EDGE_CURVE('',#68827,#68836,#68838,.T.); +#68836 = VERTEX_POINT('',#68837); +#68837 = CARTESIAN_POINT('',(-1.495,-5.21,-1.E-02)); +#68838 = LINE('',#68839,#68840); +#68839 = CARTESIAN_POINT('',(-1.495,-5.56,-1.E-02)); +#68840 = VECTOR('',#68841,1.); +#68841 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68842 = ORIENTED_EDGE('',*,*,#68843,.T.); +#68843 = EDGE_CURVE('',#68836,#68844,#68846,.T.); +#68844 = VERTEX_POINT('',#68845); +#68845 = CARTESIAN_POINT('',(-1.495,-5.067355715851,7.23557158515E-02)); +#68846 = CIRCLE('',#68847,0.164711431703); +#68847 = AXIS2_PLACEMENT_3D('',#68848,#68849,#68850); +#68848 = CARTESIAN_POINT('',(-1.495,-5.21,0.154711431703)); +#68849 = DIRECTION('',(1.,-0.,0.)); +#68850 = DIRECTION('',(0.,1.,-2.2E-16)); +#68851 = ORIENTED_EDGE('',*,*,#68852,.F.); +#68852 = EDGE_CURVE('',#68853,#68844,#68855,.T.); +#68853 = VERTEX_POINT('',#68854); +#68854 = CARTESIAN_POINT('',(-1.495,-4.76,-1.E-02)); +#68855 = CIRCLE('',#68856,0.164711431703); +#68856 = AXIS2_PLACEMENT_3D('',#68857,#68858,#68859); +#68857 = CARTESIAN_POINT('',(-1.495,-4.924711431703,-1.E-02)); +#68858 = DIRECTION('',(1.,-0.,0.)); +#68859 = DIRECTION('',(0.,1.,-2.2E-16)); +#68860 = ORIENTED_EDGE('',*,*,#68861,.F.); +#68861 = EDGE_CURVE('',#68862,#68853,#68864,.T.); +#68862 = VERTEX_POINT('',#68863); +#68863 = CARTESIAN_POINT('',(-1.495,-4.76,-0.61)); +#68864 = LINE('',#68865,#68866); +#68865 = CARTESIAN_POINT('',(-1.495,-4.76,0.4025)); +#68866 = VECTOR('',#68867,1.); +#68867 = DIRECTION('',(6.E-17,2.2E-16,1.)); +#68868 = ORIENTED_EDGE('',*,*,#68869,.F.); +#68869 = EDGE_CURVE('',#68870,#68862,#68872,.T.); +#68870 = VERTEX_POINT('',#68871); +#68871 = CARTESIAN_POINT('',(-1.495,-4.56,-0.81)); +#68872 = CIRCLE('',#68873,0.2); +#68873 = AXIS2_PLACEMENT_3D('',#68874,#68875,#68876); +#68874 = CARTESIAN_POINT('',(-1.495,-4.56,-0.61)); +#68875 = DIRECTION('',(-1.,0.,6.E-17)); +#68876 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#68877 = ORIENTED_EDGE('',*,*,#68878,.F.); +#68878 = EDGE_CURVE('',#68879,#68870,#68881,.T.); +#68879 = VERTEX_POINT('',#68880); +#68880 = CARTESIAN_POINT('',(-1.495,-4.16,-0.81)); +#68881 = LINE('',#68882,#68883); +#68882 = CARTESIAN_POINT('',(-1.495,-4.76,-0.81)); +#68883 = VECTOR('',#68884,1.); +#68884 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#68885 = ORIENTED_EDGE('',*,*,#68886,.F.); +#68886 = EDGE_CURVE('',#68810,#68879,#68887,.T.); +#68887 = CIRCLE('',#68888,0.2); +#68888 = AXIS2_PLACEMENT_3D('',#68889,#68890,#68891); +#68889 = CARTESIAN_POINT('',(-1.495,-4.16,-0.61)); +#68890 = DIRECTION('',(-1.,0.,6.E-17)); +#68891 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#68892 = PLANE('',#68893); +#68893 = AXIS2_PLACEMENT_3D('',#68894,#68895,#68896); +#68894 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#68895 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#68896 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#68897 = ADVANCED_FACE('',(#68898),#68984,.T.); +#68898 = FACE_BOUND('',#68899,.T.); +#68899 = EDGE_LOOP('',(#68900,#68908,#68909,#68917,#68926,#68934,#68943, + #68952,#68960,#68969,#68977)); +#68900 = ORIENTED_EDGE('',*,*,#68901,.F.); +#68901 = EDGE_CURVE('',#67927,#68902,#68904,.T.); +#68902 = VERTEX_POINT('',#68903); +#68903 = CARTESIAN_POINT('',(7.445,-3.96,-0.61)); +#68904 = LINE('',#68905,#68906); +#68905 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#68906 = VECTOR('',#68907,1.); +#68907 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#68908 = ORIENTED_EDGE('',*,*,#67934,.F.); +#68909 = ORIENTED_EDGE('',*,*,#68910,.T.); +#68910 = EDGE_CURVE('',#67935,#68911,#68913,.T.); +#68911 = VERTEX_POINT('',#68912); +#68912 = CARTESIAN_POINT('',(7.445,-5.56,0.19)); +#68913 = LINE('',#68914,#68915); +#68914 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#68915 = VECTOR('',#68916,1.); +#68916 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#68917 = ORIENTED_EDGE('',*,*,#68918,.T.); +#68918 = EDGE_CURVE('',#68911,#68919,#68921,.T.); +#68919 = VERTEX_POINT('',#68920); +#68920 = CARTESIAN_POINT('',(7.445,-5.36,-1.E-02)); +#68921 = CIRCLE('',#68922,0.2); +#68922 = AXIS2_PLACEMENT_3D('',#68923,#68924,#68925); +#68923 = CARTESIAN_POINT('',(7.445,-5.36,0.19)); +#68924 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#68925 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#68926 = ORIENTED_EDGE('',*,*,#68927,.F.); +#68927 = EDGE_CURVE('',#68928,#68919,#68930,.T.); +#68928 = VERTEX_POINT('',#68929); +#68929 = CARTESIAN_POINT('',(7.445,-5.21,-1.E-02)); +#68930 = LINE('',#68931,#68932); +#68931 = CARTESIAN_POINT('',(7.445,-5.56,-1.E-02)); +#68932 = VECTOR('',#68933,1.); +#68933 = DIRECTION('',(0.,-1.,3.3E-16)); +#68934 = ORIENTED_EDGE('',*,*,#68935,.F.); +#68935 = EDGE_CURVE('',#68936,#68928,#68938,.T.); +#68936 = VERTEX_POINT('',#68937); +#68937 = CARTESIAN_POINT('',(7.445,-5.067355715851,7.23557158515E-02)); +#68938 = CIRCLE('',#68939,0.164711431703); +#68939 = AXIS2_PLACEMENT_3D('',#68940,#68941,#68942); +#68940 = CARTESIAN_POINT('',(7.445,-5.21,0.154711431703)); +#68941 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#68942 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68943 = ORIENTED_EDGE('',*,*,#68944,.T.); +#68944 = EDGE_CURVE('',#68936,#68945,#68947,.T.); +#68945 = VERTEX_POINT('',#68946); +#68946 = CARTESIAN_POINT('',(7.445,-4.76,-1.E-02)); +#68947 = CIRCLE('',#68948,0.164711431703); +#68948 = AXIS2_PLACEMENT_3D('',#68949,#68950,#68951); +#68949 = CARTESIAN_POINT('',(7.445,-4.924711431703,-1.E-02)); +#68950 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#68951 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68952 = ORIENTED_EDGE('',*,*,#68953,.T.); +#68953 = EDGE_CURVE('',#68945,#68954,#68956,.T.); +#68954 = VERTEX_POINT('',#68955); +#68955 = CARTESIAN_POINT('',(7.445,-4.76,-0.61)); +#68956 = LINE('',#68957,#68958); +#68957 = CARTESIAN_POINT('',(7.445,-4.76,0.4025)); +#68958 = VECTOR('',#68959,1.); +#68959 = DIRECTION('',(2.8E-16,-3.3E-16,-1.)); +#68960 = ORIENTED_EDGE('',*,*,#68961,.F.); +#68961 = EDGE_CURVE('',#68962,#68954,#68964,.T.); +#68962 = VERTEX_POINT('',#68963); +#68963 = CARTESIAN_POINT('',(7.445,-4.56,-0.81)); +#68964 = CIRCLE('',#68965,0.2); +#68965 = AXIS2_PLACEMENT_3D('',#68966,#68967,#68968); +#68966 = CARTESIAN_POINT('',(7.445,-4.56,-0.61)); +#68967 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#68968 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#68969 = ORIENTED_EDGE('',*,*,#68970,.T.); +#68970 = EDGE_CURVE('',#68962,#68971,#68973,.T.); +#68971 = VERTEX_POINT('',#68972); +#68972 = CARTESIAN_POINT('',(7.445,-4.16,-0.81)); +#68973 = LINE('',#68974,#68975); +#68974 = CARTESIAN_POINT('',(7.445,-4.76,-0.81)); +#68975 = VECTOR('',#68976,1.); +#68976 = DIRECTION('',(0.,1.,-3.3E-16)); +#68977 = ORIENTED_EDGE('',*,*,#68978,.F.); +#68978 = EDGE_CURVE('',#68902,#68971,#68979,.T.); +#68979 = CIRCLE('',#68980,0.2); +#68980 = AXIS2_PLACEMENT_3D('',#68981,#68982,#68983); +#68981 = CARTESIAN_POINT('',(7.445,-4.16,-0.61)); +#68982 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#68983 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#68984 = PLANE('',#68985); +#68985 = AXIS2_PLACEMENT_3D('',#68986,#68987,#68988); +#68986 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#68987 = DIRECTION('',(1.,0.,2.8E-16)); +#68988 = DIRECTION('',(1.232E-31,1.,-4.4E-16)); +#68989 = ADVANCED_FACE('',(#68990),#69057,.T.); +#68990 = FACE_BOUND('',#68991,.T.); +#68991 = EDGE_LOOP('',(#68992,#69002,#69010,#69018,#69024,#69025,#69033, + #69042,#69050)); +#68992 = ORIENTED_EDGE('',*,*,#68993,.F.); +#68993 = EDGE_CURVE('',#68994,#68996,#68998,.T.); +#68994 = VERTEX_POINT('',#68995); +#68995 = CARTESIAN_POINT('',(7.445,-0.23,0.885)); +#68996 = VERTEX_POINT('',#68997); +#68997 = CARTESIAN_POINT('',(7.445,-0.23,-1.91)); +#68998 = LINE('',#68999,#69000); +#68999 = CARTESIAN_POINT('',(7.445,-0.23,1.615)); +#69000 = VECTOR('',#69001,1.); +#69001 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69002 = ORIENTED_EDGE('',*,*,#69003,.F.); +#69003 = EDGE_CURVE('',#69004,#68994,#69006,.T.); +#69004 = VERTEX_POINT('',#69005); +#69005 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#69006 = LINE('',#69007,#69008); +#69007 = CARTESIAN_POINT('',(7.445,-0.23,1.615)); +#69008 = VECTOR('',#69009,1.); +#69009 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69010 = ORIENTED_EDGE('',*,*,#69011,.F.); +#69011 = EDGE_CURVE('',#69012,#69004,#69014,.T.); +#69012 = VERTEX_POINT('',#69013); +#69013 = CARTESIAN_POINT('',(7.445,-0.63,1.285)); +#69014 = LINE('',#69015,#69016); +#69015 = CARTESIAN_POINT('',(7.445,-1.73,1.285)); +#69016 = VECTOR('',#69017,1.); +#69017 = DIRECTION('',(2.8E-16,1.,-2.2E-16)); +#69018 = ORIENTED_EDGE('',*,*,#69019,.F.); +#69019 = EDGE_CURVE('',#67902,#69012,#69020,.T.); +#69020 = LINE('',#69021,#69022); +#69021 = CARTESIAN_POINT('',(7.445,-0.63,1.615)); +#69022 = VECTOR('',#69023,1.); +#69023 = DIRECTION('',(0.,-6.7E-16,-1.)); +#69024 = ORIENTED_EDGE('',*,*,#67909,.F.); +#69025 = ORIENTED_EDGE('',*,*,#69026,.T.); +#69026 = EDGE_CURVE('',#67910,#69027,#69029,.T.); +#69027 = VERTEX_POINT('',#69028); +#69028 = CARTESIAN_POINT('',(7.445,-1.73,-1.91)); +#69029 = LINE('',#69030,#69031); +#69030 = CARTESIAN_POINT('',(7.445,-1.73,1.615)); +#69031 = VECTOR('',#69032,1.); +#69032 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69033 = ORIENTED_EDGE('',*,*,#69034,.T.); +#69034 = EDGE_CURVE('',#69027,#69035,#69037,.T.); +#69035 = VERTEX_POINT('',#69036); +#69036 = CARTESIAN_POINT('',(7.445,-1.53,-2.11)); +#69037 = CIRCLE('',#69038,0.2); +#69038 = AXIS2_PLACEMENT_3D('',#69039,#69040,#69041); +#69039 = CARTESIAN_POINT('',(7.445,-1.53,-1.91)); +#69040 = DIRECTION('',(1.,0.,2.8E-16)); +#69041 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69042 = ORIENTED_EDGE('',*,*,#69043,.T.); +#69043 = EDGE_CURVE('',#69035,#69044,#69046,.T.); +#69044 = VERTEX_POINT('',#69045); +#69045 = CARTESIAN_POINT('',(7.445,-0.43,-2.11)); +#69046 = LINE('',#69047,#69048); +#69047 = CARTESIAN_POINT('',(7.445,-1.73,-2.11)); +#69048 = VECTOR('',#69049,1.); +#69049 = DIRECTION('',(2.8E-16,1.,-2.2E-16)); +#69050 = ORIENTED_EDGE('',*,*,#69051,.F.); +#69051 = EDGE_CURVE('',#68996,#69044,#69052,.T.); +#69052 = CIRCLE('',#69053,0.2); +#69053 = AXIS2_PLACEMENT_3D('',#69054,#69055,#69056); +#69054 = CARTESIAN_POINT('',(7.445,-0.43,-1.91)); +#69055 = DIRECTION('',(-1.,0.,-2.8E-16)); +#69056 = DIRECTION('',(2.8E-16,-2.2E-16,-1.)); +#69057 = PLANE('',#69058); +#69058 = AXIS2_PLACEMENT_3D('',#69059,#69060,#69061); +#69059 = CARTESIAN_POINT('',(7.445,-1.73,1.615)); +#69060 = DIRECTION('',(1.,0.,2.8E-16)); +#69061 = DIRECTION('',(1.232E-31,1.,-4.4E-16)); +#69062 = ADVANCED_FACE('',(#69063),#69079,.F.); +#69063 = FACE_BOUND('',#69064,.F.); +#69064 = EDGE_LOOP('',(#69065,#69066,#69072,#69073)); +#69065 = ORIENTED_EDGE('',*,*,#68230,.F.); +#69066 = ORIENTED_EDGE('',*,*,#69067,.T.); +#69067 = EDGE_CURVE('',#68231,#67902,#69068,.T.); +#69068 = LINE('',#69069,#69070); +#69069 = CARTESIAN_POINT('',(5.175,-0.63,1.615)); +#69070 = VECTOR('',#69071,1.); +#69071 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69072 = ORIENTED_EDGE('',*,*,#67901,.T.); +#69073 = ORIENTED_EDGE('',*,*,#69074,.F.); +#69074 = EDGE_CURVE('',#68223,#67894,#69075,.T.); +#69075 = LINE('',#69076,#69077); +#69076 = CARTESIAN_POINT('',(5.175,-0.63,1.87)); +#69077 = VECTOR('',#69078,1.); +#69078 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69079 = PLANE('',#69080); +#69080 = AXIS2_PLACEMENT_3D('',#69081,#69082,#69083); +#69081 = CARTESIAN_POINT('',(5.175,-0.63,1.615)); +#69082 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#69083 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#69084 = ADVANCED_FACE('',(#69085),#69091,.F.); +#69085 = FACE_BOUND('',#69086,.F.); +#69086 = EDGE_LOOP('',(#69087,#69088,#69089,#69090)); +#69087 = ORIENTED_EDGE('',*,*,#68222,.F.); +#69088 = ORIENTED_EDGE('',*,*,#69074,.T.); +#69089 = ORIENTED_EDGE('',*,*,#67893,.T.); +#69090 = ORIENTED_EDGE('',*,*,#68676,.F.); +#69091 = PLANE('',#69092); +#69092 = AXIS2_PLACEMENT_3D('',#69093,#69094,#69095); +#69093 = CARTESIAN_POINT('',(5.175,-0.63,1.87)); +#69094 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#69095 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69096 = ADVANCED_FACE('',(#69097),#69164,.T.); +#69097 = FACE_BOUND('',#69098,.F.); +#69098 = EDGE_LOOP('',(#69099,#69107,#69108,#69116,#69124,#69132,#69140, + #69149,#69157)); +#69099 = ORIENTED_EDGE('',*,*,#69100,.F.); +#69100 = EDGE_CURVE('',#68071,#69101,#69103,.T.); +#69101 = VERTEX_POINT('',#69102); +#69102 = CARTESIAN_POINT('',(-1.195,-1.73,-1.91)); +#69103 = LINE('',#69104,#69105); +#69104 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#69105 = VECTOR('',#69106,1.); +#69106 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69107 = ORIENTED_EDGE('',*,*,#68078,.T.); +#69108 = ORIENTED_EDGE('',*,*,#69109,.T.); +#69109 = EDGE_CURVE('',#68079,#69110,#69112,.T.); +#69110 = VERTEX_POINT('',#69111); +#69111 = CARTESIAN_POINT('',(-1.195,-0.63,1.285)); +#69112 = LINE('',#69113,#69114); +#69113 = CARTESIAN_POINT('',(-1.195,-0.63,1.615)); +#69114 = VECTOR('',#69115,1.); +#69115 = DIRECTION('',(2.2E-16,-6.7E-16,-1.)); +#69116 = ORIENTED_EDGE('',*,*,#69117,.F.); +#69117 = EDGE_CURVE('',#69118,#69110,#69120,.T.); +#69118 = VERTEX_POINT('',#69119); +#69119 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#69120 = LINE('',#69121,#69122); +#69121 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#69122 = VECTOR('',#69123,1.); +#69123 = DIRECTION('',(-5.E-16,-1.,2.2E-16)); +#69124 = ORIENTED_EDGE('',*,*,#69125,.T.); +#69125 = EDGE_CURVE('',#69118,#69126,#69128,.T.); +#69126 = VERTEX_POINT('',#69127); +#69127 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#69128 = LINE('',#69129,#69130); +#69129 = CARTESIAN_POINT('',(-1.195,-0.23,1.615)); +#69130 = VECTOR('',#69131,1.); +#69131 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69132 = ORIENTED_EDGE('',*,*,#69133,.T.); +#69133 = EDGE_CURVE('',#69126,#69134,#69136,.T.); +#69134 = VERTEX_POINT('',#69135); +#69135 = CARTESIAN_POINT('',(-1.195,-0.23,-1.91)); +#69136 = LINE('',#69137,#69138); +#69137 = CARTESIAN_POINT('',(-1.195,-0.23,1.615)); +#69138 = VECTOR('',#69139,1.); +#69139 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69140 = ORIENTED_EDGE('',*,*,#69141,.T.); +#69141 = EDGE_CURVE('',#69134,#69142,#69144,.T.); +#69142 = VERTEX_POINT('',#69143); +#69143 = CARTESIAN_POINT('',(-1.195,-0.43,-2.11)); +#69144 = CIRCLE('',#69145,0.2); +#69145 = AXIS2_PLACEMENT_3D('',#69146,#69147,#69148); +#69146 = CARTESIAN_POINT('',(-1.195,-0.43,-1.91)); +#69147 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69148 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#69149 = ORIENTED_EDGE('',*,*,#69150,.T.); +#69150 = EDGE_CURVE('',#69142,#69151,#69153,.T.); +#69151 = VERTEX_POINT('',#69152); +#69152 = CARTESIAN_POINT('',(-1.195,-1.53,-2.11)); +#69153 = LINE('',#69154,#69155); +#69154 = CARTESIAN_POINT('',(-1.195,-0.23,-2.11)); +#69155 = VECTOR('',#69156,1.); +#69156 = DIRECTION('',(-5.E-16,-1.,2.2E-16)); +#69157 = ORIENTED_EDGE('',*,*,#69158,.F.); +#69158 = EDGE_CURVE('',#69101,#69151,#69159,.T.); +#69159 = CIRCLE('',#69160,0.2); +#69160 = AXIS2_PLACEMENT_3D('',#69161,#69162,#69163); +#69161 = CARTESIAN_POINT('',(-1.195,-1.53,-1.91)); +#69162 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69163 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69164 = PLANE('',#69165); +#69165 = AXIS2_PLACEMENT_3D('',#69166,#69167,#69168); +#69166 = CARTESIAN_POINT('',(-1.195,-0.23,1.615)); +#69167 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69168 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69169 = ADVANCED_FACE('',(#69170),#69256,.T.); +#69170 = FACE_BOUND('',#69171,.F.); +#69171 = EDGE_LOOP('',(#69172,#69180,#69181,#69189,#69198,#69206,#69215, + #69223,#69232,#69241,#69249)); +#69172 = ORIENTED_EDGE('',*,*,#69173,.F.); +#69173 = EDGE_CURVE('',#68041,#69174,#69176,.T.); +#69174 = VERTEX_POINT('',#69175); +#69175 = CARTESIAN_POINT('',(-1.195,-5.56,0.19)); +#69176 = LINE('',#69177,#69178); +#69177 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#69178 = VECTOR('',#69179,1.); +#69179 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69180 = ORIENTED_EDGE('',*,*,#68048,.F.); +#69181 = ORIENTED_EDGE('',*,*,#69182,.T.); +#69182 = EDGE_CURVE('',#68049,#69183,#69185,.T.); +#69183 = VERTEX_POINT('',#69184); +#69184 = CARTESIAN_POINT('',(-1.195,-3.96,-0.61)); +#69185 = LINE('',#69186,#69187); +#69186 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#69187 = VECTOR('',#69188,1.); +#69188 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69189 = ORIENTED_EDGE('',*,*,#69190,.T.); +#69190 = EDGE_CURVE('',#69183,#69191,#69193,.T.); +#69191 = VERTEX_POINT('',#69192); +#69192 = CARTESIAN_POINT('',(-1.195,-4.16,-0.81)); +#69193 = CIRCLE('',#69194,0.2); +#69194 = AXIS2_PLACEMENT_3D('',#69195,#69196,#69197); +#69195 = CARTESIAN_POINT('',(-1.195,-4.16,-0.61)); +#69196 = DIRECTION('',(-1.,0.,6.E-17)); +#69197 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69198 = ORIENTED_EDGE('',*,*,#69199,.F.); +#69199 = EDGE_CURVE('',#69200,#69191,#69202,.T.); +#69200 = VERTEX_POINT('',#69201); +#69201 = CARTESIAN_POINT('',(-1.195,-4.56,-0.81)); +#69202 = LINE('',#69203,#69204); +#69203 = CARTESIAN_POINT('',(-1.195,-3.96,-0.81)); +#69204 = VECTOR('',#69205,1.); +#69205 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69206 = ORIENTED_EDGE('',*,*,#69207,.T.); +#69207 = EDGE_CURVE('',#69200,#69208,#69210,.T.); +#69208 = VERTEX_POINT('',#69209); +#69209 = CARTESIAN_POINT('',(-1.195,-4.76,-0.61)); +#69210 = CIRCLE('',#69211,0.2); +#69211 = AXIS2_PLACEMENT_3D('',#69212,#69213,#69214); +#69212 = CARTESIAN_POINT('',(-1.195,-4.56,-0.61)); +#69213 = DIRECTION('',(-1.,0.,6.E-17)); +#69214 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69215 = ORIENTED_EDGE('',*,*,#69216,.F.); +#69216 = EDGE_CURVE('',#69217,#69208,#69219,.T.); +#69217 = VERTEX_POINT('',#69218); +#69218 = CARTESIAN_POINT('',(-1.195,-4.76,-1.E-02)); +#69219 = LINE('',#69220,#69221); +#69220 = CARTESIAN_POINT('',(-1.195,-4.76,0.4025)); +#69221 = VECTOR('',#69222,1.); +#69222 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69223 = ORIENTED_EDGE('',*,*,#69224,.T.); +#69224 = EDGE_CURVE('',#69217,#69225,#69227,.T.); +#69225 = VERTEX_POINT('',#69226); +#69226 = CARTESIAN_POINT('',(-1.195,-5.067355715851,7.23557158515E-02)); +#69227 = CIRCLE('',#69228,0.164711431703); +#69228 = AXIS2_PLACEMENT_3D('',#69229,#69230,#69231); +#69229 = CARTESIAN_POINT('',(-1.195,-4.924711431703,-1.E-02)); +#69230 = DIRECTION('',(1.,-0.,0.)); +#69231 = DIRECTION('',(0.,1.,-2.2E-16)); +#69232 = ORIENTED_EDGE('',*,*,#69233,.F.); +#69233 = EDGE_CURVE('',#69234,#69225,#69236,.T.); +#69234 = VERTEX_POINT('',#69235); +#69235 = CARTESIAN_POINT('',(-1.195,-5.21,-1.E-02)); +#69236 = CIRCLE('',#69237,0.164711431703); +#69237 = AXIS2_PLACEMENT_3D('',#69238,#69239,#69240); +#69238 = CARTESIAN_POINT('',(-1.195,-5.21,0.154711431703)); +#69239 = DIRECTION('',(1.,-0.,0.)); +#69240 = DIRECTION('',(0.,1.,-2.2E-16)); +#69241 = ORIENTED_EDGE('',*,*,#69242,.T.); +#69242 = EDGE_CURVE('',#69234,#69243,#69245,.T.); +#69243 = VERTEX_POINT('',#69244); +#69244 = CARTESIAN_POINT('',(-1.195,-5.36,-1.E-02)); +#69245 = LINE('',#69246,#69247); +#69246 = CARTESIAN_POINT('',(-1.195,-4.76,-1.E-02)); +#69247 = VECTOR('',#69248,1.); +#69248 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#69249 = ORIENTED_EDGE('',*,*,#69250,.F.); +#69250 = EDGE_CURVE('',#69174,#69243,#69251,.T.); +#69251 = CIRCLE('',#69252,0.2); +#69252 = AXIS2_PLACEMENT_3D('',#69253,#69254,#69255); +#69253 = CARTESIAN_POINT('',(-1.195,-5.36,0.19)); +#69254 = DIRECTION('',(1.,0.,-6.E-17)); +#69255 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69256 = PLANE('',#69257); +#69257 = AXIS2_PLACEMENT_3D('',#69258,#69259,#69260); +#69258 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#69259 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69260 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69261 = ADVANCED_FACE('',(#69262),#69273,.F.); +#69262 = FACE_BOUND('',#69263,.F.); +#69263 = EDGE_LOOP('',(#69264,#69265,#69266,#69267)); +#69264 = ORIENTED_EDGE('',*,*,#68599,.T.); +#69265 = ORIENTED_EDGE('',*,*,#68162,.T.); +#69266 = ORIENTED_EDGE('',*,*,#68485,.F.); +#69267 = ORIENTED_EDGE('',*,*,#69268,.F.); +#69268 = EDGE_CURVE('',#68600,#68486,#69269,.T.); +#69269 = LINE('',#69270,#69271); +#69270 = CARTESIAN_POINT('',(1.790654565435,-5.435,0.613423053241)); +#69271 = VECTOR('',#69272,1.); +#69272 = DIRECTION('',(7.2E-16,1.,-9.7E-16)); +#69273 = CYLINDRICAL_SURFACE('',#69274,0.25); +#69274 = AXIS2_PLACEMENT_3D('',#69275,#69276,#69277); +#69275 = CARTESIAN_POINT('',(1.685,-5.435,0.84)); +#69276 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69277 = DIRECTION('',(-1.,2.2E-16,-3.77E-15)); +#69278 = ADVANCED_FACE('',(#69279),#69290,.F.); +#69279 = FACE_BOUND('',#69280,.F.); +#69280 = EDGE_LOOP('',(#69281,#69287,#69288,#69289)); +#69281 = ORIENTED_EDGE('',*,*,#69282,.T.); +#69282 = EDGE_CURVE('',#68544,#68461,#69283,.T.); +#69283 = LINE('',#69284,#69285); +#69284 = CARTESIAN_POINT('',(4.159345434565,-5.435,0.613423053241)); +#69285 = VECTOR('',#69286,1.); +#69286 = DIRECTION('',(-5.E-16,1.,-9.7E-16)); +#69287 = ORIENTED_EDGE('',*,*,#68460,.T.); +#69288 = ORIENTED_EDGE('',*,*,#68152,.F.); +#69289 = ORIENTED_EDGE('',*,*,#68543,.F.); +#69290 = CYLINDRICAL_SURFACE('',#69291,0.25); +#69291 = AXIS2_PLACEMENT_3D('',#69292,#69293,#69294); +#69292 = CARTESIAN_POINT('',(4.265,-5.435,0.84)); +#69293 = DIRECTION('',(0.,1.,-2.2E-16)); +#69294 = DIRECTION('',(1.,-7.81E-31,-3.55E-15)); +#69295 = ADVANCED_FACE('',(#69296),#69382,.T.); +#69296 = FACE_BOUND('',#69297,.T.); +#69297 = EDGE_LOOP('',(#69298,#69306,#69307,#69315,#69324,#69332,#69341, + #69349,#69358,#69367,#69375)); +#69298 = ORIENTED_EDGE('',*,*,#69299,.F.); +#69299 = EDGE_CURVE('',#68269,#69300,#69302,.T.); +#69300 = VERTEX_POINT('',#69301); +#69301 = CARTESIAN_POINT('',(7.145,-5.56,0.19)); +#69302 = LINE('',#69303,#69304); +#69303 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#69304 = VECTOR('',#69305,1.); +#69305 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69306 = ORIENTED_EDGE('',*,*,#68268,.F.); +#69307 = ORIENTED_EDGE('',*,*,#69308,.T.); +#69308 = EDGE_CURVE('',#68261,#69309,#69311,.T.); +#69309 = VERTEX_POINT('',#69310); +#69310 = CARTESIAN_POINT('',(7.145,-3.96,-0.61)); +#69311 = LINE('',#69312,#69313); +#69312 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#69313 = VECTOR('',#69314,1.); +#69314 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69315 = ORIENTED_EDGE('',*,*,#69316,.T.); +#69316 = EDGE_CURVE('',#69309,#69317,#69319,.T.); +#69317 = VERTEX_POINT('',#69318); +#69318 = CARTESIAN_POINT('',(7.145,-4.16,-0.81)); +#69319 = CIRCLE('',#69320,0.2); +#69320 = AXIS2_PLACEMENT_3D('',#69321,#69322,#69323); +#69321 = CARTESIAN_POINT('',(7.145,-4.16,-0.61)); +#69322 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#69323 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69324 = ORIENTED_EDGE('',*,*,#69325,.T.); +#69325 = EDGE_CURVE('',#69317,#69326,#69328,.T.); +#69326 = VERTEX_POINT('',#69327); +#69327 = CARTESIAN_POINT('',(7.145,-4.56,-0.81)); +#69328 = LINE('',#69329,#69330); +#69329 = CARTESIAN_POINT('',(7.145,-3.96,-0.81)); +#69330 = VECTOR('',#69331,1.); +#69331 = DIRECTION('',(0.,-1.,3.3E-16)); +#69332 = ORIENTED_EDGE('',*,*,#69333,.T.); +#69333 = EDGE_CURVE('',#69326,#69334,#69336,.T.); +#69334 = VERTEX_POINT('',#69335); +#69335 = CARTESIAN_POINT('',(7.145,-4.76,-0.61)); +#69336 = CIRCLE('',#69337,0.2); +#69337 = AXIS2_PLACEMENT_3D('',#69338,#69339,#69340); +#69338 = CARTESIAN_POINT('',(7.145,-4.56,-0.61)); +#69339 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#69340 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69341 = ORIENTED_EDGE('',*,*,#69342,.T.); +#69342 = EDGE_CURVE('',#69334,#69343,#69345,.T.); +#69343 = VERTEX_POINT('',#69344); +#69344 = CARTESIAN_POINT('',(7.145,-4.76,-1.E-02)); +#69345 = LINE('',#69346,#69347); +#69346 = CARTESIAN_POINT('',(7.145,-4.76,0.4025)); +#69347 = VECTOR('',#69348,1.); +#69348 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#69349 = ORIENTED_EDGE('',*,*,#69350,.F.); +#69350 = EDGE_CURVE('',#69351,#69343,#69353,.T.); +#69351 = VERTEX_POINT('',#69352); +#69352 = CARTESIAN_POINT('',(7.145,-5.067355715851,7.23557158515E-02)); +#69353 = CIRCLE('',#69354,0.164711431703); +#69354 = AXIS2_PLACEMENT_3D('',#69355,#69356,#69357); +#69355 = CARTESIAN_POINT('',(7.145,-4.924711431703,-1.E-02)); +#69356 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#69357 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69358 = ORIENTED_EDGE('',*,*,#69359,.T.); +#69359 = EDGE_CURVE('',#69351,#69360,#69362,.T.); +#69360 = VERTEX_POINT('',#69361); +#69361 = CARTESIAN_POINT('',(7.145,-5.21,-1.E-02)); +#69362 = CIRCLE('',#69363,0.164711431703); +#69363 = AXIS2_PLACEMENT_3D('',#69364,#69365,#69366); +#69364 = CARTESIAN_POINT('',(7.145,-5.21,0.154711431703)); +#69365 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#69366 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69367 = ORIENTED_EDGE('',*,*,#69368,.F.); +#69368 = EDGE_CURVE('',#69369,#69360,#69371,.T.); +#69369 = VERTEX_POINT('',#69370); +#69370 = CARTESIAN_POINT('',(7.145,-5.36,-1.E-02)); +#69371 = LINE('',#69372,#69373); +#69372 = CARTESIAN_POINT('',(7.145,-4.76,-1.E-02)); +#69373 = VECTOR('',#69374,1.); +#69374 = DIRECTION('',(0.,1.,-3.3E-16)); +#69375 = ORIENTED_EDGE('',*,*,#69376,.F.); +#69376 = EDGE_CURVE('',#69300,#69369,#69377,.T.); +#69377 = CIRCLE('',#69378,0.2); +#69378 = AXIS2_PLACEMENT_3D('',#69379,#69380,#69381); +#69379 = CARTESIAN_POINT('',(7.145,-5.36,0.19)); +#69380 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69381 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69382 = PLANE('',#69383); +#69383 = AXIS2_PLACEMENT_3D('',#69384,#69385,#69386); +#69384 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#69385 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#69386 = DIRECTION('',(-1.232E-31,-1.,4.4E-16)); +#69387 = ADVANCED_FACE('',(#69388),#69455,.T.); +#69388 = FACE_BOUND('',#69389,.T.); +#69389 = EDGE_LOOP('',(#69390,#69398,#69399,#69407,#69415,#69423,#69431, + #69440,#69448)); +#69390 = ORIENTED_EDGE('',*,*,#69391,.F.); +#69391 = EDGE_CURVE('',#68239,#69392,#69394,.T.); +#69392 = VERTEX_POINT('',#69393); +#69393 = CARTESIAN_POINT('',(7.145,-1.73,-1.91)); +#69394 = LINE('',#69395,#69396); +#69395 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#69396 = VECTOR('',#69397,1.); +#69397 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69398 = ORIENTED_EDGE('',*,*,#68238,.T.); +#69399 = ORIENTED_EDGE('',*,*,#69400,.T.); +#69400 = EDGE_CURVE('',#68231,#69401,#69403,.T.); +#69401 = VERTEX_POINT('',#69402); +#69402 = CARTESIAN_POINT('',(7.145,-0.63,1.285)); +#69403 = LINE('',#69404,#69405); +#69404 = CARTESIAN_POINT('',(7.145,-0.63,1.615)); +#69405 = VECTOR('',#69406,1.); +#69406 = DIRECTION('',(0.,-6.7E-16,-1.)); +#69407 = ORIENTED_EDGE('',*,*,#69408,.F.); +#69408 = EDGE_CURVE('',#69409,#69401,#69411,.T.); +#69409 = VERTEX_POINT('',#69410); +#69410 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#69411 = LINE('',#69412,#69413); +#69412 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#69413 = VECTOR('',#69414,1.); +#69414 = DIRECTION('',(-2.8E-16,-1.,2.2E-16)); +#69415 = ORIENTED_EDGE('',*,*,#69416,.T.); +#69416 = EDGE_CURVE('',#69409,#69417,#69419,.T.); +#69417 = VERTEX_POINT('',#69418); +#69418 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#69419 = LINE('',#69420,#69421); +#69420 = CARTESIAN_POINT('',(7.145,-0.23,1.615)); +#69421 = VECTOR('',#69422,1.); +#69422 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69423 = ORIENTED_EDGE('',*,*,#69424,.T.); +#69424 = EDGE_CURVE('',#69417,#69425,#69427,.T.); +#69425 = VERTEX_POINT('',#69426); +#69426 = CARTESIAN_POINT('',(7.145,-0.23,-1.91)); +#69427 = LINE('',#69428,#69429); +#69428 = CARTESIAN_POINT('',(7.145,-0.23,1.615)); +#69429 = VECTOR('',#69430,1.); +#69430 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69431 = ORIENTED_EDGE('',*,*,#69432,.T.); +#69432 = EDGE_CURVE('',#69425,#69433,#69435,.T.); +#69433 = VERTEX_POINT('',#69434); +#69434 = CARTESIAN_POINT('',(7.145,-0.43,-2.11)); +#69435 = CIRCLE('',#69436,0.2); +#69436 = AXIS2_PLACEMENT_3D('',#69437,#69438,#69439); +#69437 = CARTESIAN_POINT('',(7.145,-0.43,-1.91)); +#69438 = DIRECTION('',(-1.,0.,-2.8E-16)); +#69439 = DIRECTION('',(2.8E-16,-2.2E-16,-1.)); +#69440 = ORIENTED_EDGE('',*,*,#69441,.T.); +#69441 = EDGE_CURVE('',#69433,#69442,#69444,.T.); +#69442 = VERTEX_POINT('',#69443); +#69443 = CARTESIAN_POINT('',(7.145,-1.53,-2.11)); +#69444 = LINE('',#69445,#69446); +#69445 = CARTESIAN_POINT('',(7.145,-0.23,-2.11)); +#69446 = VECTOR('',#69447,1.); +#69447 = DIRECTION('',(-2.8E-16,-1.,2.2E-16)); +#69448 = ORIENTED_EDGE('',*,*,#69449,.F.); +#69449 = EDGE_CURVE('',#69392,#69442,#69450,.T.); +#69450 = CIRCLE('',#69451,0.2); +#69451 = AXIS2_PLACEMENT_3D('',#69452,#69453,#69454); +#69452 = CARTESIAN_POINT('',(7.145,-1.53,-1.91)); +#69453 = DIRECTION('',(1.,0.,2.8E-16)); +#69454 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69455 = PLANE('',#69456); +#69456 = AXIS2_PLACEMENT_3D('',#69457,#69458,#69459); +#69457 = CARTESIAN_POINT('',(7.145,-0.23,1.615)); +#69458 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#69459 = DIRECTION('',(-1.232E-31,-1.,4.4E-16)); +#69460 = ADVANCED_FACE('',(#69461),#69472,.T.); +#69461 = FACE_BOUND('',#69462,.T.); +#69462 = EDGE_LOOP('',(#69463,#69464,#69465,#69466)); +#69463 = ORIENTED_EDGE('',*,*,#68910,.F.); +#69464 = ORIENTED_EDGE('',*,*,#68337,.F.); +#69465 = ORIENTED_EDGE('',*,*,#69299,.T.); +#69466 = ORIENTED_EDGE('',*,*,#69467,.T.); +#69467 = EDGE_CURVE('',#69300,#68911,#69468,.T.); +#69468 = LINE('',#69469,#69470); +#69469 = CARTESIAN_POINT('',(7.145,-5.56,0.19)); +#69470 = VECTOR('',#69471,1.); +#69471 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69472 = PLANE('',#69473); +#69473 = AXIS2_PLACEMENT_3D('',#69474,#69475,#69476); +#69474 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#69475 = DIRECTION('',(0.,-1.,4.4E-16)); +#69476 = DIRECTION('',(1.,1.232E-31,2.8E-16)); +#69477 = ADVANCED_FACE('',(#69478),#69489,.T.); +#69478 = FACE_BOUND('',#69479,.F.); +#69479 = EDGE_LOOP('',(#69480,#69481,#69482,#69483)); +#69480 = ORIENTED_EDGE('',*,*,#68818,.F.); +#69481 = ORIENTED_EDGE('',*,*,#68354,.F.); +#69482 = ORIENTED_EDGE('',*,*,#69173,.T.); +#69483 = ORIENTED_EDGE('',*,*,#69484,.T.); +#69484 = EDGE_CURVE('',#69174,#68819,#69485,.T.); +#69485 = LINE('',#69486,#69487); +#69486 = CARTESIAN_POINT('',(-1.195,-5.56,0.19)); +#69487 = VECTOR('',#69488,1.); +#69488 = DIRECTION('',(-1.,0.,6.E-17)); +#69489 = PLANE('',#69490); +#69490 = AXIS2_PLACEMENT_3D('',#69491,#69492,#69493); +#69491 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#69492 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#69493 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69494 = ADVANCED_FACE('',(#69495),#69506,.T.); +#69495 = FACE_BOUND('',#69496,.T.); +#69496 = EDGE_LOOP('',(#69497,#69498,#69499,#69500)); +#69497 = ORIENTED_EDGE('',*,*,#69308,.F.); +#69498 = ORIENTED_EDGE('',*,*,#68381,.F.); +#69499 = ORIENTED_EDGE('',*,*,#68901,.T.); +#69500 = ORIENTED_EDGE('',*,*,#69501,.F.); +#69501 = EDGE_CURVE('',#69309,#68902,#69502,.T.); +#69502 = LINE('',#69503,#69504); +#69503 = CARTESIAN_POINT('',(7.145,-3.96,-0.61)); +#69504 = VECTOR('',#69505,1.); +#69505 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69506 = PLANE('',#69507); +#69507 = AXIS2_PLACEMENT_3D('',#69508,#69509,#69510); +#69508 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#69509 = DIRECTION('',(0.,1.,-4.4E-16)); +#69510 = DIRECTION('',(-1.,-1.232E-31,-2.8E-16)); +#69511 = ADVANCED_FACE('',(#69512),#69523,.T.); +#69512 = FACE_BOUND('',#69513,.F.); +#69513 = EDGE_LOOP('',(#69514,#69515,#69516,#69517)); +#69514 = ORIENTED_EDGE('',*,*,#69182,.F.); +#69515 = ORIENTED_EDGE('',*,*,#68410,.F.); +#69516 = ORIENTED_EDGE('',*,*,#68809,.T.); +#69517 = ORIENTED_EDGE('',*,*,#69518,.F.); +#69518 = EDGE_CURVE('',#69183,#68810,#69519,.T.); +#69519 = LINE('',#69520,#69521); +#69520 = CARTESIAN_POINT('',(-1.195,-3.96,-0.61)); +#69521 = VECTOR('',#69522,1.); +#69522 = DIRECTION('',(-1.,0.,6.E-17)); +#69523 = PLANE('',#69524); +#69524 = AXIS2_PLACEMENT_3D('',#69525,#69526,#69527); +#69525 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#69526 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69527 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69528 = ADVANCED_FACE('',(#69529),#69540,.T.); +#69529 = FACE_BOUND('',#69530,.T.); +#69530 = EDGE_LOOP('',(#69531,#69532,#69538,#69539)); +#69531 = ORIENTED_EDGE('',*,*,#69391,.T.); +#69532 = ORIENTED_EDGE('',*,*,#69533,.T.); +#69533 = EDGE_CURVE('',#69392,#69027,#69534,.T.); +#69534 = LINE('',#69535,#69536); +#69535 = CARTESIAN_POINT('',(7.145,-1.73,-1.91)); +#69536 = VECTOR('',#69537,1.); +#69537 = DIRECTION('',(1.,0.,2.8E-16)); +#69538 = ORIENTED_EDGE('',*,*,#69026,.F.); +#69539 = ORIENTED_EDGE('',*,*,#68429,.F.); +#69540 = PLANE('',#69541); +#69541 = AXIS2_PLACEMENT_3D('',#69542,#69543,#69544); +#69542 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#69543 = DIRECTION('',(0.,-1.,4.4E-16)); +#69544 = DIRECTION('',(1.,1.232E-31,2.8E-16)); +#69545 = ADVANCED_FACE('',(#69546),#69557,.T.); +#69546 = FACE_BOUND('',#69547,.F.); +#69547 = EDGE_LOOP('',(#69548,#69549,#69555,#69556)); +#69548 = ORIENTED_EDGE('',*,*,#69100,.T.); +#69549 = ORIENTED_EDGE('',*,*,#69550,.T.); +#69550 = EDGE_CURVE('',#69101,#68770,#69551,.T.); +#69551 = LINE('',#69552,#69553); +#69552 = CARTESIAN_POINT('',(-1.195,-1.73,-1.91)); +#69553 = VECTOR('',#69554,1.); +#69554 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69555 = ORIENTED_EDGE('',*,*,#68769,.F.); +#69556 = ORIENTED_EDGE('',*,*,#68446,.F.); +#69557 = PLANE('',#69558); +#69558 = AXIS2_PLACEMENT_3D('',#69559,#69560,#69561); +#69559 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#69560 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#69561 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69562 = ADVANCED_FACE('',(#69563),#69581,.F.); +#69563 = FACE_BOUND('',#69564,.F.); +#69564 = EDGE_LOOP('',(#69565,#69573,#69579,#69580)); +#69565 = ORIENTED_EDGE('',*,*,#69566,.F.); +#69566 = EDGE_CURVE('',#69567,#68461,#69569,.T.); +#69567 = VERTEX_POINT('',#69568); +#69568 = CARTESIAN_POINT('',(3.588392739261,-2.26,0.879662667505)); +#69569 = LINE('',#69570,#69571); +#69570 = CARTESIAN_POINT('',(3.588392739261,-2.26,0.879662667505)); +#69571 = VECTOR('',#69572,1.); +#69572 = DIRECTION('',(0.906307787037,4.999999999998E-17,-0.422618261741 + )); +#69573 = ORIENTED_EDGE('',*,*,#69574,.F.); +#69574 = EDGE_CURVE('',#68511,#69567,#69575,.T.); +#69575 = LINE('',#69576,#69577); +#69576 = CARTESIAN_POINT('',(3.334821782217,-2.26,0.335877995283)); +#69577 = VECTOR('',#69578,1.); +#69578 = DIRECTION('',(0.422618261741,5.299999999998E-16,0.906307787037) + ); +#69579 = ORIENTED_EDGE('',*,*,#68510,.T.); +#69580 = ORIENTED_EDGE('',*,*,#68471,.F.); +#69581 = PLANE('',#69582); +#69582 = AXIS2_PLACEMENT_3D('',#69583,#69584,#69585); +#69583 = CARTESIAN_POINT('',(3.334821782217,-2.26,0.335877995283)); +#69584 = DIRECTION('',(1.4E-16,-1.,5.2E-16)); +#69585 = DIRECTION('',(-0.422618261741,-5.304466059027E-16, + -0.906307787037)); +#69586 = ADVANCED_FACE('',(#69587),#69605,.F.); +#69587 = FACE_BOUND('',#69588,.T.); +#69588 = EDGE_LOOP('',(#69589,#69597,#69603,#69604)); +#69589 = ORIENTED_EDGE('',*,*,#69590,.F.); +#69590 = EDGE_CURVE('',#69591,#68486,#69593,.T.); +#69591 = VERTEX_POINT('',#69592); +#69592 = CARTESIAN_POINT('',(2.361607260739,-2.26,0.879662667505)); +#69593 = LINE('',#69594,#69595); +#69594 = CARTESIAN_POINT('',(2.361607260739,-2.26,0.879662667505)); +#69595 = VECTOR('',#69596,1.); +#69596 = DIRECTION('',(-0.906307787037,2.499999999999E-16, + -0.422618261741)); +#69597 = ORIENTED_EDGE('',*,*,#69598,.F.); +#69598 = EDGE_CURVE('',#68567,#69591,#69599,.T.); +#69599 = LINE('',#69600,#69601); +#69600 = CARTESIAN_POINT('',(2.615178217783,-2.26,0.335877995283)); +#69601 = VECTOR('',#69602,1.); +#69602 = DIRECTION('',(-0.422618261741,6.299999999997E-16,0.906307787037 + )); +#69603 = ORIENTED_EDGE('',*,*,#68566,.T.); +#69604 = ORIENTED_EDGE('',*,*,#68496,.F.); +#69605 = PLANE('',#69606); +#69606 = AXIS2_PLACEMENT_3D('',#69607,#69608,#69609); +#69607 = CARTESIAN_POINT('',(2.615178217783,-2.26,0.335877995283)); +#69608 = DIRECTION('',(-3.6E-16,-1.,5.2E-16)); +#69609 = DIRECTION('',(-0.422618261741,6.234226234857E-16,0.906307787037 + )); +#69610 = ADVANCED_FACE('',(#69611),#69629,.T.); +#69611 = FACE_BOUND('',#69612,.F.); +#69612 = EDGE_LOOP('',(#69613,#69614,#69615,#69623)); +#69613 = ORIENTED_EDGE('',*,*,#68518,.T.); +#69614 = ORIENTED_EDGE('',*,*,#69574,.T.); +#69615 = ORIENTED_EDGE('',*,*,#69616,.F.); +#69616 = EDGE_CURVE('',#69617,#69567,#69619,.T.); +#69617 = VERTEX_POINT('',#69618); +#69618 = CARTESIAN_POINT('',(3.588392739261,-2.66,0.879662667505)); +#69619 = LINE('',#69620,#69621); +#69620 = CARTESIAN_POINT('',(3.588392739261,-5.435,0.879662667505)); +#69621 = VECTOR('',#69622,1.); +#69622 = DIRECTION('',(-5.E-16,1.,-9.7E-16)); +#69623 = ORIENTED_EDGE('',*,*,#69624,.F.); +#69624 = EDGE_CURVE('',#68519,#69617,#69625,.T.); +#69625 = LINE('',#69626,#69627); +#69626 = CARTESIAN_POINT('',(3.334821782217,-2.66,0.335877995283)); +#69627 = VECTOR('',#69628,1.); +#69628 = DIRECTION('',(0.422618261741,5.299999999998E-16,0.906307787037) + ); +#69629 = PLANE('',#69630); +#69630 = AXIS2_PLACEMENT_3D('',#69631,#69632,#69633); +#69631 = CARTESIAN_POINT('',(3.525,-2.46,0.74371649945)); +#69632 = DIRECTION('',(-0.906307787037,-6.999999999997E-17, + 0.422618261741)); +#69633 = DIRECTION('',(-0.422618261741,-1.999999999999E-16, + -0.906307787037)); +#69634 = ADVANCED_FACE('',(#69635),#69646,.F.); +#69635 = FACE_BOUND('',#69636,.F.); +#69636 = EDGE_LOOP('',(#69637,#69638,#69639,#69645)); +#69637 = ORIENTED_EDGE('',*,*,#68526,.F.); +#69638 = ORIENTED_EDGE('',*,*,#69624,.T.); +#69639 = ORIENTED_EDGE('',*,*,#69640,.T.); +#69640 = EDGE_CURVE('',#69617,#68544,#69641,.T.); +#69641 = LINE('',#69642,#69643); +#69642 = CARTESIAN_POINT('',(3.588392739261,-2.66,0.879662667505)); +#69643 = VECTOR('',#69644,1.); +#69644 = DIRECTION('',(0.906307787037,-8.999999999996E-17, + -0.422618261741)); +#69645 = ORIENTED_EDGE('',*,*,#68552,.F.); +#69646 = PLANE('',#69647); +#69647 = AXIS2_PLACEMENT_3D('',#69648,#69649,#69650); +#69648 = CARTESIAN_POINT('',(3.334821782217,-2.66,0.335877995283)); +#69649 = DIRECTION('',(-1.4E-16,1.,-5.2E-16)); +#69650 = DIRECTION('',(0.422618261741,5.304466059027E-16,0.906307787037) + ); +#69651 = ADVANCED_FACE('',(#69652),#69670,.T.); +#69652 = FACE_BOUND('',#69653,.T.); +#69653 = EDGE_LOOP('',(#69654,#69655,#69656,#69664)); +#69654 = ORIENTED_EDGE('',*,*,#68574,.T.); +#69655 = ORIENTED_EDGE('',*,*,#69598,.T.); +#69656 = ORIENTED_EDGE('',*,*,#69657,.F.); +#69657 = EDGE_CURVE('',#69658,#69591,#69660,.T.); +#69658 = VERTEX_POINT('',#69659); +#69659 = CARTESIAN_POINT('',(2.361607260739,-2.66,0.879662667505)); +#69660 = LINE('',#69661,#69662); +#69661 = CARTESIAN_POINT('',(2.361607260739,-5.435,0.879662667505)); +#69662 = VECTOR('',#69663,1.); +#69663 = DIRECTION('',(7.2E-16,1.,-9.7E-16)); +#69664 = ORIENTED_EDGE('',*,*,#69665,.F.); +#69665 = EDGE_CURVE('',#68575,#69658,#69666,.T.); +#69666 = LINE('',#69667,#69668); +#69667 = CARTESIAN_POINT('',(2.615178217783,-2.66,0.335877995283)); +#69668 = VECTOR('',#69669,1.); +#69669 = DIRECTION('',(-0.422618261741,6.299999999997E-16,0.906307787037 + )); +#69670 = PLANE('',#69671); +#69671 = AXIS2_PLACEMENT_3D('',#69672,#69673,#69674); +#69672 = CARTESIAN_POINT('',(2.425,-2.46,0.74371649945)); +#69673 = DIRECTION('',(0.906307787037,-2.699999999999E-16,0.422618261741 + )); +#69674 = DIRECTION('',(-0.422618261741,2.999999999999E-16,0.906307787037 + )); +#69675 = ADVANCED_FACE('',(#69676),#69687,.F.); +#69676 = FACE_BOUND('',#69677,.T.); +#69677 = EDGE_LOOP('',(#69678,#69679,#69680,#69686)); +#69678 = ORIENTED_EDGE('',*,*,#68582,.F.); +#69679 = ORIENTED_EDGE('',*,*,#69665,.T.); +#69680 = ORIENTED_EDGE('',*,*,#69681,.T.); +#69681 = EDGE_CURVE('',#69658,#68600,#69682,.T.); +#69682 = LINE('',#69683,#69684); +#69683 = CARTESIAN_POINT('',(2.361607260739,-2.66,0.879662667505)); +#69684 = VECTOR('',#69685,1.); +#69685 = DIRECTION('',(-0.906307787037,1.1E-16,-0.422618261741)); +#69686 = ORIENTED_EDGE('',*,*,#68608,.F.); +#69687 = PLANE('',#69688); +#69688 = AXIS2_PLACEMENT_3D('',#69689,#69690,#69691); +#69689 = CARTESIAN_POINT('',(2.615178217783,-2.66,0.335877995283)); +#69690 = DIRECTION('',(3.6E-16,1.,-5.2E-16)); +#69691 = DIRECTION('',(0.422618261741,-6.234226234857E-16, + -0.906307787037)); +#69692 = ADVANCED_FACE('',(#69693),#69713,.T.); +#69693 = FACE_BOUND('',#69694,.T.); +#69694 = EDGE_LOOP('',(#69695,#69704,#69705,#69706)); +#69695 = ORIENTED_EDGE('',*,*,#69696,.F.); +#69696 = EDGE_CURVE('',#68623,#69697,#69699,.T.); +#69697 = VERTEX_POINT('',#69698); +#69698 = CARTESIAN_POINT('',(0.535,-2.85,-1.E-02)); +#69699 = CIRCLE('',#69700,0.1); +#69700 = AXIS2_PLACEMENT_3D('',#69701,#69702,#69703); +#69701 = CARTESIAN_POINT('',(0.535,-2.85,9.E-02)); +#69702 = DIRECTION('',(-1.9E-16,-1.,1.1E-16)); +#69703 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#69704 = ORIENTED_EDGE('',*,*,#68622,.T.); +#69705 = ORIENTED_EDGE('',*,*,#69696,.T.); +#69706 = ORIENTED_EDGE('',*,*,#69707,.F.); +#69707 = EDGE_CURVE('',#69697,#69697,#69708,.T.); +#69708 = CIRCLE('',#69709,0.25); +#69709 = AXIS2_PLACEMENT_3D('',#69710,#69711,#69712); +#69710 = CARTESIAN_POINT('',(0.785,-2.85,-1.E-02)); +#69711 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#69712 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#69713 = TOROIDAL_SURFACE('',#69714,0.25,0.1); +#69714 = AXIS2_PLACEMENT_3D('',#69715,#69716,#69717); +#69715 = CARTESIAN_POINT('',(0.785,-2.85,9.E-02)); +#69716 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#69717 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#69718 = ADVANCED_FACE('',(#69719),#69739,.T.); +#69719 = FACE_BOUND('',#69720,.T.); +#69720 = EDGE_LOOP('',(#69721,#69730,#69737,#69738)); +#69721 = ORIENTED_EDGE('',*,*,#69722,.T.); +#69722 = EDGE_CURVE('',#69723,#69723,#69725,.T.); +#69723 = VERTEX_POINT('',#69724); +#69724 = CARTESIAN_POINT('',(5.415,-2.85,-1.E-02)); +#69725 = CIRCLE('',#69726,0.25); +#69726 = AXIS2_PLACEMENT_3D('',#69727,#69728,#69729); +#69727 = CARTESIAN_POINT('',(5.165,-2.85,-1.E-02)); +#69728 = DIRECTION('',(-1.81528329172E-49,1.1E-16,1.)); +#69729 = DIRECTION('',(1.,-3.E-17,3.3E-33)); +#69730 = ORIENTED_EDGE('',*,*,#69731,.F.); +#69731 = EDGE_CURVE('',#68648,#69723,#69732,.T.); +#69732 = CIRCLE('',#69733,0.1); +#69733 = AXIS2_PLACEMENT_3D('',#69734,#69735,#69736); +#69734 = CARTESIAN_POINT('',(5.415,-2.85,9.E-02)); +#69735 = DIRECTION('',(3.E-17,1.,-1.1E-16)); +#69736 = DIRECTION('',(1.,-3.E-17,-1.81528329172E-49)); +#69737 = ORIENTED_EDGE('',*,*,#68655,.F.); +#69738 = ORIENTED_EDGE('',*,*,#69731,.T.); +#69739 = TOROIDAL_SURFACE('',#69740,0.25,0.1); +#69740 = AXIS2_PLACEMENT_3D('',#69741,#69742,#69743); +#69741 = CARTESIAN_POINT('',(5.165,-2.85,9.E-02)); +#69742 = DIRECTION('',(0.,-1.1E-16,-1.)); +#69743 = DIRECTION('',(1.,-3.E-17,3.3E-33)); +#69744 = ADVANCED_FACE('',(#69745),#69756,.F.); +#69745 = FACE_BOUND('',#69746,.T.); +#69746 = EDGE_LOOP('',(#69747,#69748,#69754,#69755)); +#69747 = ORIENTED_EDGE('',*,*,#69109,.T.); +#69748 = ORIENTED_EDGE('',*,*,#69749,.T.); +#69749 = EDGE_CURVE('',#69110,#68755,#69750,.T.); +#69750 = LINE('',#69751,#69752); +#69751 = CARTESIAN_POINT('',(0.775,-0.63,1.285)); +#69752 = VECTOR('',#69753,1.); +#69753 = DIRECTION('',(-1.,0.,6.E-17)); +#69754 = ORIENTED_EDGE('',*,*,#68762,.F.); +#69755 = ORIENTED_EDGE('',*,*,#68720,.F.); +#69756 = PLANE('',#69757); +#69757 = AXIS2_PLACEMENT_3D('',#69758,#69759,#69760); +#69758 = CARTESIAN_POINT('',(-1.195,-0.63,1.615)); +#69759 = DIRECTION('',(0.,-1.,6.7E-16)); +#69760 = DIRECTION('',(1.,-4.02E-32,-6.E-17)); +#69761 = ADVANCED_FACE('',(#69762),#69778,.T.); +#69762 = FACE_BOUND('',#69763,.F.); +#69763 = EDGE_LOOP('',(#69764,#69765,#69771,#69772)); +#69764 = ORIENTED_EDGE('',*,*,#69133,.F.); +#69765 = ORIENTED_EDGE('',*,*,#69766,.T.); +#69766 = EDGE_CURVE('',#69126,#68737,#69767,.T.); +#69767 = LINE('',#69768,#69769); +#69768 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#69769 = VECTOR('',#69770,1.); +#69770 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#69771 = ORIENTED_EDGE('',*,*,#68736,.T.); +#69772 = ORIENTED_EDGE('',*,*,#69773,.T.); +#69773 = EDGE_CURVE('',#68739,#69134,#69774,.T.); +#69774 = LINE('',#69775,#69776); +#69775 = CARTESIAN_POINT('',(-1.495,-0.23,-1.91)); +#69776 = VECTOR('',#69777,1.); +#69777 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69778 = PLANE('',#69779); +#69779 = AXIS2_PLACEMENT_3D('',#69780,#69781,#69782); +#69780 = CARTESIAN_POINT('',(-1.495,-0.23,1.615)); +#69781 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69782 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69783 = ADVANCED_FACE('',(#69784),#69795,.T.); +#69784 = FACE_BOUND('',#69785,.T.); +#69785 = EDGE_LOOP('',(#69786,#69787,#69788,#69794)); +#69786 = ORIENTED_EDGE('',*,*,#69773,.T.); +#69787 = ORIENTED_EDGE('',*,*,#69141,.T.); +#69788 = ORIENTED_EDGE('',*,*,#69789,.F.); +#69789 = EDGE_CURVE('',#68787,#69142,#69790,.T.); +#69790 = LINE('',#69791,#69792); +#69791 = CARTESIAN_POINT('',(-1.495,-0.43,-2.11)); +#69792 = VECTOR('',#69793,1.); +#69793 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69794 = ORIENTED_EDGE('',*,*,#68794,.F.); +#69795 = CYLINDRICAL_SURFACE('',#69796,0.2); +#69796 = AXIS2_PLACEMENT_3D('',#69797,#69798,#69799); +#69797 = CARTESIAN_POINT('',(-1.495,-0.43,-1.91)); +#69798 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69799 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69800 = ADVANCED_FACE('',(#69801),#69826,.F.); +#69801 = FACE_BOUND('',#69802,.T.); +#69802 = EDGE_LOOP('',(#69803,#69811,#69812,#69820)); +#69803 = ORIENTED_EDGE('',*,*,#69804,.F.); +#69804 = EDGE_CURVE('',#68737,#69805,#69807,.T.); +#69805 = VERTEX_POINT('',#69806); +#69806 = CARTESIAN_POINT('',(-1.495,-3.E-02,0.885)); +#69807 = LINE('',#69808,#69809); +#69808 = CARTESIAN_POINT('',(-1.495,-0.23,0.885)); +#69809 = VECTOR('',#69810,1.); +#69810 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69811 = ORIENTED_EDGE('',*,*,#68746,.F.); +#69812 = ORIENTED_EDGE('',*,*,#69813,.T.); +#69813 = EDGE_CURVE('',#68747,#69814,#69816,.T.); +#69814 = VERTEX_POINT('',#69815); +#69815 = CARTESIAN_POINT('',(-1.495,-3.E-02,1.285)); +#69816 = LINE('',#69817,#69818); +#69817 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#69818 = VECTOR('',#69819,1.); +#69819 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69820 = ORIENTED_EDGE('',*,*,#69821,.F.); +#69821 = EDGE_CURVE('',#69805,#69814,#69822,.T.); +#69822 = LINE('',#69823,#69824); +#69823 = CARTESIAN_POINT('',(-1.495,-3.E-02,0.885)); +#69824 = VECTOR('',#69825,1.); +#69825 = DIRECTION('',(-1.E-16,8.9E-16,1.)); +#69826 = PLANE('',#69827); +#69827 = AXIS2_PLACEMENT_3D('',#69828,#69829,#69830); +#69828 = CARTESIAN_POINT('',(-1.495,-0.23,0.885)); +#69829 = DIRECTION('',(1.,-2.2E-16,1.E-16)); +#69830 = DIRECTION('',(1.E-16,-8.9E-16,-1.)); +#69831 = ADVANCED_FACE('',(#69832),#69843,.F.); +#69832 = FACE_BOUND('',#69833,.T.); +#69833 = EDGE_LOOP('',(#69834,#69835,#69836,#69837)); +#69834 = ORIENTED_EDGE('',*,*,#68786,.T.); +#69835 = ORIENTED_EDGE('',*,*,#69789,.T.); +#69836 = ORIENTED_EDGE('',*,*,#69150,.T.); +#69837 = ORIENTED_EDGE('',*,*,#69838,.T.); +#69838 = EDGE_CURVE('',#69151,#68778,#69839,.T.); +#69839 = LINE('',#69840,#69841); +#69840 = CARTESIAN_POINT('',(-1.195,-1.53,-2.11)); +#69841 = VECTOR('',#69842,1.); +#69842 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69843 = PLANE('',#69844); +#69844 = AXIS2_PLACEMENT_3D('',#69845,#69846,#69847); +#69845 = CARTESIAN_POINT('',(-1.345,-2.921081081081,-2.11)); +#69846 = DIRECTION('',(-2.2E-16,5.6E-16,1.)); +#69847 = DIRECTION('',(-2.2E-16,-1.,5.6E-16)); +#69848 = ADVANCED_FACE('',(#69849),#69860,.T.); +#69849 = FACE_BOUND('',#69850,.F.); +#69850 = EDGE_LOOP('',(#69851,#69852,#69853,#69854)); +#69851 = ORIENTED_EDGE('',*,*,#69117,.T.); +#69852 = ORIENTED_EDGE('',*,*,#69749,.T.); +#69853 = ORIENTED_EDGE('',*,*,#68754,.T.); +#69854 = ORIENTED_EDGE('',*,*,#69855,.T.); +#69855 = EDGE_CURVE('',#68747,#69118,#69856,.T.); +#69856 = LINE('',#69857,#69858); +#69857 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#69858 = VECTOR('',#69859,1.); +#69859 = DIRECTION('',(1.,-5.E-16,-6.E-17)); +#69860 = PLANE('',#69861); +#69861 = AXIS2_PLACEMENT_3D('',#69862,#69863,#69864); +#69862 = CARTESIAN_POINT('',(-1.345,-2.921081081081,1.285)); +#69863 = DIRECTION('',(-2.2E-16,5.6E-16,1.)); +#69864 = DIRECTION('',(-2.2E-16,-1.,5.6E-16)); +#69865 = ADVANCED_FACE('',(#69866),#69872,.T.); +#69866 = FACE_BOUND('',#69867,.T.); +#69867 = EDGE_LOOP('',(#69868,#69869,#69870,#69871)); +#69868 = ORIENTED_EDGE('',*,*,#69550,.T.); +#69869 = ORIENTED_EDGE('',*,*,#68777,.T.); +#69870 = ORIENTED_EDGE('',*,*,#69838,.F.); +#69871 = ORIENTED_EDGE('',*,*,#69158,.F.); +#69872 = CYLINDRICAL_SURFACE('',#69873,0.2); +#69873 = AXIS2_PLACEMENT_3D('',#69874,#69875,#69876); +#69874 = CARTESIAN_POINT('',(-1.195,-1.53,-1.91)); +#69875 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69876 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#69877 = ADVANCED_FACE('',(#69878),#69889,.T.); +#69878 = FACE_BOUND('',#69879,.T.); +#69879 = EDGE_LOOP('',(#69880,#69881,#69887,#69888)); +#69880 = ORIENTED_EDGE('',*,*,#69190,.T.); +#69881 = ORIENTED_EDGE('',*,*,#69882,.T.); +#69882 = EDGE_CURVE('',#69191,#68879,#69883,.T.); +#69883 = LINE('',#69884,#69885); +#69884 = CARTESIAN_POINT('',(-1.195,-4.16,-0.81)); +#69885 = VECTOR('',#69886,1.); +#69886 = DIRECTION('',(-1.,0.,6.E-17)); +#69887 = ORIENTED_EDGE('',*,*,#68886,.F.); +#69888 = ORIENTED_EDGE('',*,*,#69518,.F.); +#69889 = CYLINDRICAL_SURFACE('',#69890,0.2); +#69890 = AXIS2_PLACEMENT_3D('',#69891,#69892,#69893); +#69891 = CARTESIAN_POINT('',(-1.195,-4.16,-0.61)); +#69892 = DIRECTION('',(-1.,0.,6.E-17)); +#69893 = DIRECTION('',(-1.98E-32,1.,-3.3E-16)); +#69894 = ADVANCED_FACE('',(#69895),#69906,.T.); +#69895 = FACE_BOUND('',#69896,.F.); +#69896 = EDGE_LOOP('',(#69897,#69898,#69899,#69900)); +#69897 = ORIENTED_EDGE('',*,*,#69199,.T.); +#69898 = ORIENTED_EDGE('',*,*,#69882,.T.); +#69899 = ORIENTED_EDGE('',*,*,#68878,.T.); +#69900 = ORIENTED_EDGE('',*,*,#69901,.F.); +#69901 = EDGE_CURVE('',#69200,#68870,#69902,.T.); +#69902 = LINE('',#69903,#69904); +#69903 = CARTESIAN_POINT('',(-1.195,-4.56,-0.81)); +#69904 = VECTOR('',#69905,1.); +#69905 = DIRECTION('',(-1.,0.,6.E-17)); +#69906 = PLANE('',#69907); +#69907 = AXIS2_PLACEMENT_3D('',#69908,#69909,#69910); +#69908 = CARTESIAN_POINT('',(2.975,-3.96,-0.81)); +#69909 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#69910 = DIRECTION('',(-9.081839894577E-49,1.,-3.3E-16)); +#69911 = ADVANCED_FACE('',(#69912),#69923,.T.); +#69912 = FACE_BOUND('',#69913,.T.); +#69913 = EDGE_LOOP('',(#69914,#69915,#69921,#69922)); +#69914 = ORIENTED_EDGE('',*,*,#69207,.T.); +#69915 = ORIENTED_EDGE('',*,*,#69916,.T.); +#69916 = EDGE_CURVE('',#69208,#68862,#69917,.T.); +#69917 = LINE('',#69918,#69919); +#69918 = CARTESIAN_POINT('',(-1.195,-4.76,-0.61)); +#69919 = VECTOR('',#69920,1.); +#69920 = DIRECTION('',(-1.,0.,6.E-17)); +#69921 = ORIENTED_EDGE('',*,*,#68869,.F.); +#69922 = ORIENTED_EDGE('',*,*,#69901,.F.); +#69923 = CYLINDRICAL_SURFACE('',#69924,0.2); +#69924 = AXIS2_PLACEMENT_3D('',#69925,#69926,#69927); +#69925 = CARTESIAN_POINT('',(-1.195,-4.56,-0.61)); +#69926 = DIRECTION('',(-1.,0.,6.E-17)); +#69927 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69928 = ADVANCED_FACE('',(#69929),#69940,.T.); +#69929 = FACE_BOUND('',#69930,.T.); +#69930 = EDGE_LOOP('',(#69931,#69932,#69933,#69939)); +#69931 = ORIENTED_EDGE('',*,*,#69484,.T.); +#69932 = ORIENTED_EDGE('',*,*,#68826,.T.); +#69933 = ORIENTED_EDGE('',*,*,#69934,.F.); +#69934 = EDGE_CURVE('',#69243,#68827,#69935,.T.); +#69935 = LINE('',#69936,#69937); +#69936 = CARTESIAN_POINT('',(-1.195,-5.36,-1.E-02)); +#69937 = VECTOR('',#69938,1.); +#69938 = DIRECTION('',(-1.,0.,6.E-17)); +#69939 = ORIENTED_EDGE('',*,*,#69250,.F.); +#69940 = CYLINDRICAL_SURFACE('',#69941,0.2); +#69941 = AXIS2_PLACEMENT_3D('',#69942,#69943,#69944); +#69942 = CARTESIAN_POINT('',(-1.195,-5.36,0.19)); +#69943 = DIRECTION('',(-1.,0.,6.E-17)); +#69944 = DIRECTION('',(1.98E-32,-1.,3.3E-16)); +#69945 = ADVANCED_FACE('',(#69946),#69957,.T.); +#69946 = FACE_BOUND('',#69947,.F.); +#69947 = EDGE_LOOP('',(#69948,#69949,#69950,#69951)); +#69948 = ORIENTED_EDGE('',*,*,#69216,.T.); +#69949 = ORIENTED_EDGE('',*,*,#69916,.T.); +#69950 = ORIENTED_EDGE('',*,*,#68861,.T.); +#69951 = ORIENTED_EDGE('',*,*,#69952,.F.); +#69952 = EDGE_CURVE('',#69217,#68853,#69953,.T.); +#69953 = LINE('',#69954,#69955); +#69954 = CARTESIAN_POINT('',(2.975,-4.76,-1.E-02)); +#69955 = VECTOR('',#69956,1.); +#69956 = DIRECTION('',(-1.,0.,6.E-17)); +#69957 = PLANE('',#69958); +#69958 = AXIS2_PLACEMENT_3D('',#69959,#69960,#69961); +#69959 = CARTESIAN_POINT('',(2.975,-4.76,-0.81)); +#69960 = DIRECTION('',(0.,-1.,3.3E-16)); +#69961 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#69962 = ADVANCED_FACE('',(#69963),#69974,.F.); +#69963 = FACE_BOUND('',#69964,.T.); +#69964 = EDGE_LOOP('',(#69965,#69966,#69967,#69968)); +#69965 = ORIENTED_EDGE('',*,*,#69242,.T.); +#69966 = ORIENTED_EDGE('',*,*,#69934,.T.); +#69967 = ORIENTED_EDGE('',*,*,#68835,.T.); +#69968 = ORIENTED_EDGE('',*,*,#69969,.F.); +#69969 = EDGE_CURVE('',#69234,#68836,#69970,.T.); +#69970 = LINE('',#69971,#69972); +#69971 = CARTESIAN_POINT('',(2.975,-5.21,-1.E-02)); +#69972 = VECTOR('',#69973,1.); +#69973 = DIRECTION('',(-1.,0.,6.E-17)); +#69974 = PLANE('',#69975); +#69975 = AXIS2_PLACEMENT_3D('',#69976,#69977,#69978); +#69976 = CARTESIAN_POINT('',(2.975,-5.56,-1.E-02)); +#69977 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#69978 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#69979 = ADVANCED_FACE('',(#69980),#69991,.F.); +#69980 = FACE_BOUND('',#69981,.F.); +#69981 = EDGE_LOOP('',(#69982,#69983,#69984,#69985)); +#69982 = ORIENTED_EDGE('',*,*,#69224,.F.); +#69983 = ORIENTED_EDGE('',*,*,#69952,.T.); +#69984 = ORIENTED_EDGE('',*,*,#68852,.T.); +#69985 = ORIENTED_EDGE('',*,*,#69986,.F.); +#69986 = EDGE_CURVE('',#69225,#68844,#69987,.T.); +#69987 = LINE('',#69988,#69989); +#69988 = CARTESIAN_POINT('',(2.975,-5.067355715851,7.23557158515E-02)); +#69989 = VECTOR('',#69990,1.); +#69990 = DIRECTION('',(-1.,0.,6.E-17)); +#69991 = CYLINDRICAL_SURFACE('',#69992,0.164711431703); +#69992 = AXIS2_PLACEMENT_3D('',#69993,#69994,#69995); +#69993 = CARTESIAN_POINT('',(2.975,-4.924711431703,-1.E-02)); +#69994 = DIRECTION('',(1.,0.,0.)); +#69995 = DIRECTION('',(0.,1.,-3.3E-16)); +#69996 = ADVANCED_FACE('',(#69997),#70003,.T.); +#69997 = FACE_BOUND('',#69998,.T.); +#69998 = EDGE_LOOP('',(#69999,#70000,#70001,#70002)); +#69999 = ORIENTED_EDGE('',*,*,#69233,.F.); +#70000 = ORIENTED_EDGE('',*,*,#69969,.T.); +#70001 = ORIENTED_EDGE('',*,*,#68843,.T.); +#70002 = ORIENTED_EDGE('',*,*,#69986,.F.); +#70003 = CYLINDRICAL_SURFACE('',#70004,0.164711431703); +#70004 = AXIS2_PLACEMENT_3D('',#70005,#70006,#70007); +#70005 = CARTESIAN_POINT('',(2.975,-5.21,0.154711431703)); +#70006 = DIRECTION('',(1.,0.,0.)); +#70007 = DIRECTION('',(0.,1.,-3.3E-16)); +#70008 = ADVANCED_FACE('',(#70009),#70020,.T.); +#70009 = FACE_BOUND('',#70010,.T.); +#70010 = EDGE_LOOP('',(#70011,#70012,#70013,#70019)); +#70011 = ORIENTED_EDGE('',*,*,#69501,.T.); +#70012 = ORIENTED_EDGE('',*,*,#68978,.T.); +#70013 = ORIENTED_EDGE('',*,*,#70014,.F.); +#70014 = EDGE_CURVE('',#69317,#68971,#70015,.T.); +#70015 = LINE('',#70016,#70017); +#70016 = CARTESIAN_POINT('',(7.145,-4.16,-0.81)); +#70017 = VECTOR('',#70018,1.); +#70018 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70019 = ORIENTED_EDGE('',*,*,#69316,.F.); +#70020 = CYLINDRICAL_SURFACE('',#70021,0.2); +#70021 = AXIS2_PLACEMENT_3D('',#70022,#70023,#70024); +#70022 = CARTESIAN_POINT('',(7.145,-4.16,-0.61)); +#70023 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70024 = DIRECTION('',(2.2E-16,1.,-1.E-15)); +#70025 = ADVANCED_FACE('',(#70026),#70037,.T.); +#70026 = FACE_BOUND('',#70027,.T.); +#70027 = EDGE_LOOP('',(#70028,#70029,#70030,#70031)); +#70028 = ORIENTED_EDGE('',*,*,#69325,.F.); +#70029 = ORIENTED_EDGE('',*,*,#70014,.T.); +#70030 = ORIENTED_EDGE('',*,*,#68970,.F.); +#70031 = ORIENTED_EDGE('',*,*,#70032,.F.); +#70032 = EDGE_CURVE('',#69326,#68962,#70033,.T.); +#70033 = LINE('',#70034,#70035); +#70034 = CARTESIAN_POINT('',(7.145,-4.56,-0.81)); +#70035 = VECTOR('',#70036,1.); +#70036 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70037 = PLANE('',#70038); +#70038 = AXIS2_PLACEMENT_3D('',#70039,#70040,#70041); +#70039 = CARTESIAN_POINT('',(2.975,-3.96,-0.81)); +#70040 = DIRECTION('',(2.8E-16,-3.3E-16,-1.)); +#70041 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#70042 = ADVANCED_FACE('',(#70043),#70054,.T.); +#70043 = FACE_BOUND('',#70044,.T.); +#70044 = EDGE_LOOP('',(#70045,#70046,#70047,#70053)); +#70045 = ORIENTED_EDGE('',*,*,#70032,.T.); +#70046 = ORIENTED_EDGE('',*,*,#68961,.T.); +#70047 = ORIENTED_EDGE('',*,*,#70048,.F.); +#70048 = EDGE_CURVE('',#69334,#68954,#70049,.T.); +#70049 = LINE('',#70050,#70051); +#70050 = CARTESIAN_POINT('',(7.145,-4.76,-0.61)); +#70051 = VECTOR('',#70052,1.); +#70052 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70053 = ORIENTED_EDGE('',*,*,#69333,.F.); +#70054 = CYLINDRICAL_SURFACE('',#70055,0.2); +#70055 = AXIS2_PLACEMENT_3D('',#70056,#70057,#70058); +#70056 = CARTESIAN_POINT('',(7.145,-4.56,-0.61)); +#70057 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70058 = DIRECTION('',(2.8E-16,-7.8E-16,-1.)); +#70059 = ADVANCED_FACE('',(#70060),#70071,.T.); +#70060 = FACE_BOUND('',#70061,.T.); +#70061 = EDGE_LOOP('',(#70062,#70063,#70069,#70070)); +#70062 = ORIENTED_EDGE('',*,*,#69376,.T.); +#70063 = ORIENTED_EDGE('',*,*,#70064,.T.); +#70064 = EDGE_CURVE('',#69369,#68919,#70065,.T.); +#70065 = LINE('',#70066,#70067); +#70066 = CARTESIAN_POINT('',(7.145,-5.36,-1.E-02)); +#70067 = VECTOR('',#70068,1.); +#70068 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70069 = ORIENTED_EDGE('',*,*,#68918,.F.); +#70070 = ORIENTED_EDGE('',*,*,#69467,.F.); +#70071 = CYLINDRICAL_SURFACE('',#70072,0.2); +#70072 = AXIS2_PLACEMENT_3D('',#70073,#70074,#70075); +#70073 = CARTESIAN_POINT('',(7.145,-5.36,0.19)); +#70074 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70075 = DIRECTION('',(-2.2E-16,-1.,1.E-15)); +#70076 = ADVANCED_FACE('',(#70077),#70088,.T.); +#70077 = FACE_BOUND('',#70078,.T.); +#70078 = EDGE_LOOP('',(#70079,#70080,#70081,#70082)); +#70079 = ORIENTED_EDGE('',*,*,#69342,.F.); +#70080 = ORIENTED_EDGE('',*,*,#70048,.T.); +#70081 = ORIENTED_EDGE('',*,*,#68953,.F.); +#70082 = ORIENTED_EDGE('',*,*,#70083,.F.); +#70083 = EDGE_CURVE('',#69343,#68945,#70084,.T.); +#70084 = LINE('',#70085,#70086); +#70085 = CARTESIAN_POINT('',(2.975,-4.76,-1.E-02)); +#70086 = VECTOR('',#70087,1.); +#70087 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70088 = PLANE('',#70089); +#70089 = AXIS2_PLACEMENT_3D('',#70090,#70091,#70092); +#70090 = CARTESIAN_POINT('',(2.975,-4.76,-0.81)); +#70091 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#70092 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#70093 = ADVANCED_FACE('',(#70094),#70105,.F.); +#70094 = FACE_BOUND('',#70095,.F.); +#70095 = EDGE_LOOP('',(#70096,#70097,#70098,#70099)); +#70096 = ORIENTED_EDGE('',*,*,#69368,.F.); +#70097 = ORIENTED_EDGE('',*,*,#70064,.T.); +#70098 = ORIENTED_EDGE('',*,*,#68927,.F.); +#70099 = ORIENTED_EDGE('',*,*,#70100,.F.); +#70100 = EDGE_CURVE('',#69360,#68928,#70101,.T.); +#70101 = LINE('',#70102,#70103); +#70102 = CARTESIAN_POINT('',(2.975,-5.21,-1.E-02)); +#70103 = VECTOR('',#70104,1.); +#70104 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70105 = PLANE('',#70106); +#70106 = AXIS2_PLACEMENT_3D('',#70107,#70108,#70109); +#70107 = CARTESIAN_POINT('',(2.975,-5.56,-1.E-02)); +#70108 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#70109 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#70110 = ADVANCED_FACE('',(#70111),#70122,.F.); +#70111 = FACE_BOUND('',#70112,.F.); +#70112 = EDGE_LOOP('',(#70113,#70119,#70120,#70121)); +#70113 = ORIENTED_EDGE('',*,*,#70114,.T.); +#70114 = EDGE_CURVE('',#69351,#68936,#70115,.T.); +#70115 = LINE('',#70116,#70117); +#70116 = CARTESIAN_POINT('',(2.975,-5.067355715851,7.23557158515E-02)); +#70117 = VECTOR('',#70118,1.); +#70118 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70119 = ORIENTED_EDGE('',*,*,#68944,.T.); +#70120 = ORIENTED_EDGE('',*,*,#70083,.F.); +#70121 = ORIENTED_EDGE('',*,*,#69350,.F.); +#70122 = CYLINDRICAL_SURFACE('',#70123,0.164711431703); +#70123 = AXIS2_PLACEMENT_3D('',#70124,#70125,#70126); +#70124 = CARTESIAN_POINT('',(2.975,-4.924711431703,-1.E-02)); +#70125 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#70126 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#70127 = ADVANCED_FACE('',(#70128),#70134,.T.); +#70128 = FACE_BOUND('',#70129,.T.); +#70129 = EDGE_LOOP('',(#70130,#70131,#70132,#70133)); +#70130 = ORIENTED_EDGE('',*,*,#70114,.T.); +#70131 = ORIENTED_EDGE('',*,*,#68935,.T.); +#70132 = ORIENTED_EDGE('',*,*,#70100,.F.); +#70133 = ORIENTED_EDGE('',*,*,#69359,.F.); +#70134 = CYLINDRICAL_SURFACE('',#70135,0.164711431703); +#70135 = AXIS2_PLACEMENT_3D('',#70136,#70137,#70138); +#70136 = CARTESIAN_POINT('',(2.975,-5.21,0.154711431703)); +#70137 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#70138 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#70139 = ADVANCED_FACE('',(#70140),#70156,.T.); +#70140 = FACE_BOUND('',#70141,.T.); +#70141 = EDGE_LOOP('',(#70142,#70143,#70149,#70150)); +#70142 = ORIENTED_EDGE('',*,*,#69424,.F.); +#70143 = ORIENTED_EDGE('',*,*,#70144,.T.); +#70144 = EDGE_CURVE('',#69417,#68994,#70145,.T.); +#70145 = LINE('',#70146,#70147); +#70146 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#70147 = VECTOR('',#70148,1.); +#70148 = DIRECTION('',(1.,0.,1.2E-16)); +#70149 = ORIENTED_EDGE('',*,*,#68993,.T.); +#70150 = ORIENTED_EDGE('',*,*,#70151,.T.); +#70151 = EDGE_CURVE('',#68996,#69425,#70152,.T.); +#70152 = LINE('',#70153,#70154); +#70153 = CARTESIAN_POINT('',(7.445,-0.23,-1.91)); +#70154 = VECTOR('',#70155,1.); +#70155 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#70156 = PLANE('',#70157); +#70157 = AXIS2_PLACEMENT_3D('',#70158,#70159,#70160); +#70158 = CARTESIAN_POINT('',(7.445,-0.23,1.615)); +#70159 = DIRECTION('',(0.,1.,-4.4E-16)); +#70160 = DIRECTION('',(-1.,-1.232E-31,-2.8E-16)); +#70161 = ADVANCED_FACE('',(#70162),#70173,.T.); +#70162 = FACE_BOUND('',#70163,.T.); +#70163 = EDGE_LOOP('',(#70164,#70165,#70171,#70172)); +#70164 = ORIENTED_EDGE('',*,*,#69051,.T.); +#70165 = ORIENTED_EDGE('',*,*,#70166,.T.); +#70166 = EDGE_CURVE('',#69044,#69433,#70167,.T.); +#70167 = LINE('',#70168,#70169); +#70168 = CARTESIAN_POINT('',(7.445,-0.43,-2.11)); +#70169 = VECTOR('',#70170,1.); +#70170 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#70171 = ORIENTED_EDGE('',*,*,#69432,.F.); +#70172 = ORIENTED_EDGE('',*,*,#70151,.F.); +#70173 = CYLINDRICAL_SURFACE('',#70174,0.2); +#70174 = AXIS2_PLACEMENT_3D('',#70175,#70176,#70177); +#70175 = CARTESIAN_POINT('',(7.445,-0.43,-1.91)); +#70176 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#70177 = DIRECTION('',(2.8E-31,1.,-1.E-15)); +#70178 = ADVANCED_FACE('',(#70179),#70204,.F.); +#70179 = FACE_BOUND('',#70180,.F.); +#70180 = EDGE_LOOP('',(#70181,#70189,#70190,#70198)); +#70181 = ORIENTED_EDGE('',*,*,#70182,.F.); +#70182 = EDGE_CURVE('',#68994,#70183,#70185,.T.); +#70183 = VERTEX_POINT('',#70184); +#70184 = CARTESIAN_POINT('',(7.445,-3.E-02,0.885)); +#70185 = LINE('',#70186,#70187); +#70186 = CARTESIAN_POINT('',(7.445,-0.23,0.885)); +#70187 = VECTOR('',#70188,1.); +#70188 = DIRECTION('',(0.,1.,-2.2E-16)); +#70189 = ORIENTED_EDGE('',*,*,#69003,.F.); +#70190 = ORIENTED_EDGE('',*,*,#70191,.T.); +#70191 = EDGE_CURVE('',#69004,#70192,#70194,.T.); +#70192 = VERTEX_POINT('',#70193); +#70193 = CARTESIAN_POINT('',(7.445,-3.E-02,1.285)); +#70194 = LINE('',#70195,#70196); +#70195 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#70196 = VECTOR('',#70197,1.); +#70197 = DIRECTION('',(0.,1.,-2.2E-16)); +#70198 = ORIENTED_EDGE('',*,*,#70199,.F.); +#70199 = EDGE_CURVE('',#70183,#70192,#70200,.T.); +#70200 = LINE('',#70201,#70202); +#70201 = CARTESIAN_POINT('',(7.445,-3.E-02,0.885)); +#70202 = VECTOR('',#70203,1.); +#70203 = DIRECTION('',(-1.2E-16,8.9E-16,1.)); +#70204 = PLANE('',#70205); +#70205 = AXIS2_PLACEMENT_3D('',#70206,#70207,#70208); +#70206 = CARTESIAN_POINT('',(7.445,-0.23,0.885)); +#70207 = DIRECTION('',(-1.,-0.,-1.2E-16)); +#70208 = DIRECTION('',(-1.2E-16,8.9E-16,1.)); +#70209 = ADVANCED_FACE('',(#70210),#70221,.F.); +#70210 = FACE_BOUND('',#70211,.F.); +#70211 = EDGE_LOOP('',(#70212,#70213,#70214,#70215)); +#70212 = ORIENTED_EDGE('',*,*,#69043,.T.); +#70213 = ORIENTED_EDGE('',*,*,#70166,.T.); +#70214 = ORIENTED_EDGE('',*,*,#69441,.T.); +#70215 = ORIENTED_EDGE('',*,*,#70216,.T.); +#70216 = EDGE_CURVE('',#69442,#69035,#70217,.T.); +#70217 = LINE('',#70218,#70219); +#70218 = CARTESIAN_POINT('',(7.145,-1.53,-2.11)); +#70219 = VECTOR('',#70220,1.); +#70220 = DIRECTION('',(1.,0.,2.8E-16)); +#70221 = PLANE('',#70222); +#70222 = AXIS2_PLACEMENT_3D('',#70223,#70224,#70225); +#70223 = CARTESIAN_POINT('',(7.295,-2.921081081081,-2.11)); +#70224 = DIRECTION('',(0.,5.6E-16,1.)); +#70225 = DIRECTION('',(0.,1.,-5.6E-16)); +#70226 = ADVANCED_FACE('',(#70227),#70243,.T.); +#70227 = FACE_BOUND('',#70228,.T.); +#70228 = EDGE_LOOP('',(#70229,#70230,#70236,#70237)); +#70229 = ORIENTED_EDGE('',*,*,#69408,.T.); +#70230 = ORIENTED_EDGE('',*,*,#70231,.T.); +#70231 = EDGE_CURVE('',#69401,#69012,#70232,.T.); +#70232 = LINE('',#70233,#70234); +#70233 = CARTESIAN_POINT('',(5.175,-0.63,1.285)); +#70234 = VECTOR('',#70235,1.); +#70235 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70236 = ORIENTED_EDGE('',*,*,#69011,.T.); +#70237 = ORIENTED_EDGE('',*,*,#70238,.T.); +#70238 = EDGE_CURVE('',#69004,#69409,#70239,.T.); +#70239 = LINE('',#70240,#70241); +#70240 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#70241 = VECTOR('',#70242,1.); +#70242 = DIRECTION('',(-1.,2.8E-16,-2.8E-16)); +#70243 = PLANE('',#70244); +#70244 = AXIS2_PLACEMENT_3D('',#70245,#70246,#70247); +#70245 = CARTESIAN_POINT('',(7.295,-2.921081081081,1.285)); +#70246 = DIRECTION('',(0.,5.6E-16,1.)); +#70247 = DIRECTION('',(0.,1.,-5.6E-16)); +#70248 = ADVANCED_FACE('',(#70249),#70255,.T.); +#70249 = FACE_BOUND('',#70250,.T.); +#70250 = EDGE_LOOP('',(#70251,#70252,#70253,#70254)); +#70251 = ORIENTED_EDGE('',*,*,#69449,.T.); +#70252 = ORIENTED_EDGE('',*,*,#70216,.T.); +#70253 = ORIENTED_EDGE('',*,*,#69034,.F.); +#70254 = ORIENTED_EDGE('',*,*,#69533,.F.); +#70255 = CYLINDRICAL_SURFACE('',#70256,0.2); +#70256 = AXIS2_PLACEMENT_3D('',#70257,#70258,#70259); +#70257 = CARTESIAN_POINT('',(7.145,-1.53,-1.91)); +#70258 = DIRECTION('',(1.,0.,2.8E-16)); +#70259 = DIRECTION('',(-2.8E-31,-1.,1.E-15)); +#70260 = ADVANCED_FACE('',(#70261),#70267,.F.); +#70261 = FACE_BOUND('',#70262,.F.); +#70262 = EDGE_LOOP('',(#70263,#70264,#70265,#70266)); +#70263 = ORIENTED_EDGE('',*,*,#69400,.T.); +#70264 = ORIENTED_EDGE('',*,*,#70231,.T.); +#70265 = ORIENTED_EDGE('',*,*,#69019,.F.); +#70266 = ORIENTED_EDGE('',*,*,#69067,.F.); +#70267 = PLANE('',#70268); +#70268 = AXIS2_PLACEMENT_3D('',#70269,#70270,#70271); +#70269 = CARTESIAN_POINT('',(7.145,-0.63,1.615)); +#70270 = DIRECTION('',(-2.2E-16,-1.,6.7E-16)); +#70271 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70272 = ADVANCED_FACE('',(#70273),#70298,.F.); +#70273 = FACE_BOUND('',#70274,.T.); +#70274 = EDGE_LOOP('',(#70275,#70283,#70284,#70292)); +#70275 = ORIENTED_EDGE('',*,*,#70276,.F.); +#70276 = EDGE_CURVE('',#69118,#70277,#70279,.T.); +#70277 = VERTEX_POINT('',#70278); +#70278 = CARTESIAN_POINT('',(-1.195,-3.E-02,1.285)); +#70279 = LINE('',#70280,#70281); +#70280 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#70281 = VECTOR('',#70282,1.); +#70282 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#70283 = ORIENTED_EDGE('',*,*,#69125,.T.); +#70284 = ORIENTED_EDGE('',*,*,#70285,.T.); +#70285 = EDGE_CURVE('',#69126,#70286,#70288,.T.); +#70286 = VERTEX_POINT('',#70287); +#70287 = CARTESIAN_POINT('',(-1.195,-3.E-02,0.885)); +#70288 = LINE('',#70289,#70290); +#70289 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#70290 = VECTOR('',#70291,1.); +#70291 = DIRECTION('',(2.2E-16,1.,-8.9E-16)); +#70292 = ORIENTED_EDGE('',*,*,#70293,.F.); +#70293 = EDGE_CURVE('',#70277,#70286,#70294,.T.); +#70294 = LINE('',#70295,#70296); +#70295 = CARTESIAN_POINT('',(-1.195,-3.E-02,1.285)); +#70296 = VECTOR('',#70297,1.); +#70297 = DIRECTION('',(1.E-16,-8.9E-16,-1.)); +#70298 = PLANE('',#70299); +#70299 = AXIS2_PLACEMENT_3D('',#70300,#70301,#70302); +#70300 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#70301 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#70302 = DIRECTION('',(-1.E-16,8.9E-16,1.)); +#70303 = ADVANCED_FACE('',(#70304),#70310,.F.); +#70304 = FACE_BOUND('',#70305,.T.); +#70305 = EDGE_LOOP('',(#70306,#70307,#70308,#70309)); +#70306 = ORIENTED_EDGE('',*,*,#69681,.F.); +#70307 = ORIENTED_EDGE('',*,*,#69657,.T.); +#70308 = ORIENTED_EDGE('',*,*,#69590,.T.); +#70309 = ORIENTED_EDGE('',*,*,#69268,.F.); +#70310 = PLANE('',#70311); +#70311 = AXIS2_PLACEMENT_3D('',#70312,#70313,#70314); +#70312 = CARTESIAN_POINT('',(2.361607260739,-5.435,0.879662667505)); +#70313 = DIRECTION('',(0.422618261741,-1.179999999999E-15, + -0.906307787037)); +#70314 = DIRECTION('',(-7.185615334283E-16,-1.,9.669151984819E-16)); +#70315 = ADVANCED_FACE('',(#70316),#70322,.F.); +#70316 = FACE_BOUND('',#70317,.F.); +#70317 = EDGE_LOOP('',(#70318,#70319,#70320,#70321)); +#70318 = ORIENTED_EDGE('',*,*,#69640,.F.); +#70319 = ORIENTED_EDGE('',*,*,#69616,.T.); +#70320 = ORIENTED_EDGE('',*,*,#69566,.T.); +#70321 = ORIENTED_EDGE('',*,*,#69282,.F.); +#70322 = PLANE('',#70323); +#70323 = AXIS2_PLACEMENT_3D('',#70324,#70325,#70326); +#70324 = CARTESIAN_POINT('',(3.588392739261,-5.435,0.879662667505)); +#70325 = DIRECTION('',(-0.422618261741,-1.09E-15,-0.906307787037)); +#70326 = DIRECTION('',(-4.998192528061E-16,1.,-9.696123863918E-16)); +#70327 = ADVANCED_FACE('',(#70328),#70353,.F.); +#70328 = FACE_BOUND('',#70329,.F.); +#70329 = EDGE_LOOP('',(#70330,#70338,#70339,#70347)); +#70330 = ORIENTED_EDGE('',*,*,#70331,.F.); +#70331 = EDGE_CURVE('',#69409,#70332,#70334,.T.); +#70332 = VERTEX_POINT('',#70333); +#70333 = CARTESIAN_POINT('',(7.145,-3.E-02,1.285)); +#70334 = LINE('',#70335,#70336); +#70335 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#70336 = VECTOR('',#70337,1.); +#70337 = DIRECTION('',(0.,1.,-2.2E-16)); +#70338 = ORIENTED_EDGE('',*,*,#69416,.T.); +#70339 = ORIENTED_EDGE('',*,*,#70340,.T.); +#70340 = EDGE_CURVE('',#69417,#70341,#70343,.T.); +#70341 = VERTEX_POINT('',#70342); +#70342 = CARTESIAN_POINT('',(7.145,-3.E-02,0.885)); +#70343 = LINE('',#70344,#70345); +#70344 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#70345 = VECTOR('',#70346,1.); +#70346 = DIRECTION('',(0.,1.,-8.9E-16)); +#70347 = ORIENTED_EDGE('',*,*,#70348,.F.); +#70348 = EDGE_CURVE('',#70332,#70341,#70349,.T.); +#70349 = LINE('',#70350,#70351); +#70350 = CARTESIAN_POINT('',(7.145,-3.E-02,1.285)); +#70351 = VECTOR('',#70352,1.); +#70352 = DIRECTION('',(1.2E-16,-8.9E-16,-1.)); +#70353 = PLANE('',#70354); +#70354 = AXIS2_PLACEMENT_3D('',#70355,#70356,#70357); +#70355 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#70356 = DIRECTION('',(1.,0.,1.2E-16)); +#70357 = DIRECTION('',(1.2E-16,-8.9E-16,-1.)); +#70358 = ADVANCED_FACE('',(#70359),#70362,.F.); +#70359 = FACE_BOUND('',#70360,.T.); +#70360 = EDGE_LOOP('',(#70361)); +#70361 = ORIENTED_EDGE('',*,*,#69707,.T.); +#70362 = PLANE('',#70363); +#70363 = AXIS2_PLACEMENT_3D('',#70364,#70365,#70366); +#70364 = CARTESIAN_POINT('',(0.785,-2.85,-1.E-02)); +#70365 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70366 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#70367 = ADVANCED_FACE('',(#70368),#70371,.F.); +#70368 = FACE_BOUND('',#70369,.F.); +#70369 = EDGE_LOOP('',(#70370)); +#70370 = ORIENTED_EDGE('',*,*,#69722,.T.); +#70371 = PLANE('',#70372); +#70372 = AXIS2_PLACEMENT_3D('',#70373,#70374,#70375); +#70373 = CARTESIAN_POINT('',(5.165,-2.85,-1.E-02)); +#70374 = DIRECTION('',(0.,2.2E-16,1.)); +#70375 = DIRECTION('',(1.,0.,-0.)); +#70376 = ADVANCED_FACE('',(#70377),#70388,.F.); +#70377 = FACE_BOUND('',#70378,.T.); +#70378 = EDGE_LOOP('',(#70379,#70380,#70381,#70382)); +#70379 = ORIENTED_EDGE('',*,*,#70285,.F.); +#70380 = ORIENTED_EDGE('',*,*,#69766,.T.); +#70381 = ORIENTED_EDGE('',*,*,#69804,.T.); +#70382 = ORIENTED_EDGE('',*,*,#70383,.F.); +#70383 = EDGE_CURVE('',#70286,#69805,#70384,.T.); +#70384 = LINE('',#70385,#70386); +#70385 = CARTESIAN_POINT('',(-1.195,-3.E-02,0.885)); +#70386 = VECTOR('',#70387,1.); +#70387 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#70388 = PLANE('',#70389); +#70389 = AXIS2_PLACEMENT_3D('',#70390,#70391,#70392); +#70390 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#70391 = DIRECTION('',(-1.E-16,2.2E-16,1.)); +#70392 = DIRECTION('',(1.,-2.2E-16,1.E-16)); +#70393 = ADVANCED_FACE('',(#70394),#70405,.F.); +#70394 = FACE_BOUND('',#70395,.T.); +#70395 = EDGE_LOOP('',(#70396,#70397,#70398,#70399)); +#70396 = ORIENTED_EDGE('',*,*,#69813,.F.); +#70397 = ORIENTED_EDGE('',*,*,#69855,.T.); +#70398 = ORIENTED_EDGE('',*,*,#70276,.T.); +#70399 = ORIENTED_EDGE('',*,*,#70400,.F.); +#70400 = EDGE_CURVE('',#69814,#70277,#70401,.T.); +#70401 = LINE('',#70402,#70403); +#70402 = CARTESIAN_POINT('',(-1.495,-3.E-02,1.285)); +#70403 = VECTOR('',#70404,1.); +#70404 = DIRECTION('',(1.,-2.2E-16,1.E-16)); +#70405 = PLANE('',#70406); +#70406 = AXIS2_PLACEMENT_3D('',#70407,#70408,#70409); +#70407 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#70408 = DIRECTION('',(1.E-16,-2.2E-16,-1.)); +#70409 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#70410 = ADVANCED_FACE('',(#70411),#70438,.T.); +#70411 = FACE_BOUND('',#70412,.T.); +#70412 = EDGE_LOOP('',(#70413,#70414,#70423,#70431)); +#70413 = ORIENTED_EDGE('',*,*,#69821,.T.); +#70414 = ORIENTED_EDGE('',*,*,#70415,.T.); +#70415 = EDGE_CURVE('',#69814,#70416,#70418,.T.); +#70416 = VERTEX_POINT('',#70417); +#70417 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,1.285)); +#70418 = CIRCLE('',#70419,0.45); +#70419 = AXIS2_PLACEMENT_3D('',#70420,#70421,#70422); +#70420 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,1.285)); +#70421 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70422 = DIRECTION('',(-1.,-5.109E-14,-2.2E-16)); +#70423 = ORIENTED_EDGE('',*,*,#70424,.F.); +#70424 = EDGE_CURVE('',#70425,#70416,#70427,.T.); +#70425 = VERTEX_POINT('',#70426); +#70426 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,0.885)); +#70427 = LINE('',#70428,#70429); +#70428 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,0.885)); +#70429 = VECTOR('',#70430,1.); +#70430 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70431 = ORIENTED_EDGE('',*,*,#70432,.F.); +#70432 = EDGE_CURVE('',#69805,#70425,#70433,.T.); +#70433 = CIRCLE('',#70434,0.45); +#70434 = AXIS2_PLACEMENT_3D('',#70435,#70436,#70437); +#70435 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,0.885)); +#70436 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70437 = DIRECTION('',(-1.,-5.109E-14,-2.2E-16)); +#70438 = CYLINDRICAL_SURFACE('',#70439,0.45); +#70439 = AXIS2_PLACEMENT_3D('',#70440,#70441,#70442); +#70440 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,0.885)); +#70441 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70442 = DIRECTION('',(-1.,-5.109E-14,-2.2E-16)); +#70443 = ADVANCED_FACE('',(#70444),#70455,.F.); +#70444 = FACE_BOUND('',#70445,.F.); +#70445 = EDGE_LOOP('',(#70446,#70447,#70448,#70449)); +#70446 = ORIENTED_EDGE('',*,*,#70340,.F.); +#70447 = ORIENTED_EDGE('',*,*,#70144,.T.); +#70448 = ORIENTED_EDGE('',*,*,#70182,.T.); +#70449 = ORIENTED_EDGE('',*,*,#70450,.F.); +#70450 = EDGE_CURVE('',#70341,#70183,#70451,.T.); +#70451 = LINE('',#70452,#70453); +#70452 = CARTESIAN_POINT('',(7.145,-3.E-02,0.885)); +#70453 = VECTOR('',#70454,1.); +#70454 = DIRECTION('',(1.,0.,1.2E-16)); +#70455 = PLANE('',#70456); +#70456 = AXIS2_PLACEMENT_3D('',#70457,#70458,#70459); +#70457 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#70458 = DIRECTION('',(-1.2E-16,2.2E-16,1.)); +#70459 = DIRECTION('',(1.,0.,1.2E-16)); +#70460 = ADVANCED_FACE('',(#70461),#70472,.F.); +#70461 = FACE_BOUND('',#70462,.F.); +#70462 = EDGE_LOOP('',(#70463,#70464,#70465,#70466)); +#70463 = ORIENTED_EDGE('',*,*,#70191,.F.); +#70464 = ORIENTED_EDGE('',*,*,#70238,.T.); +#70465 = ORIENTED_EDGE('',*,*,#70331,.T.); +#70466 = ORIENTED_EDGE('',*,*,#70467,.F.); +#70467 = EDGE_CURVE('',#70192,#70332,#70468,.T.); +#70468 = LINE('',#70469,#70470); +#70469 = CARTESIAN_POINT('',(7.445,-3.E-02,1.285)); +#70470 = VECTOR('',#70471,1.); +#70471 = DIRECTION('',(-1.,-0.,-1.2E-16)); +#70472 = PLANE('',#70473); +#70473 = AXIS2_PLACEMENT_3D('',#70474,#70475,#70476); +#70474 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#70475 = DIRECTION('',(1.2E-16,-2.2E-16,-1.)); +#70476 = DIRECTION('',(-1.,0.,-1.2E-16)); +#70477 = ADVANCED_FACE('',(#70478),#70505,.T.); +#70478 = FACE_BOUND('',#70479,.T.); +#70479 = EDGE_LOOP('',(#70480,#70489,#70497,#70504)); +#70480 = ORIENTED_EDGE('',*,*,#70481,.T.); +#70481 = EDGE_CURVE('',#70183,#70482,#70484,.T.); +#70482 = VERTEX_POINT('',#70483); +#70483 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,0.885)); +#70484 = CIRCLE('',#70485,0.45); +#70485 = AXIS2_PLACEMENT_3D('',#70486,#70487,#70488); +#70486 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,0.885)); +#70487 = DIRECTION('',(1.660794737852E-46,2.2E-16,1.)); +#70488 = DIRECTION('',(1.,-5.132E-14,1.12904E-29)); +#70489 = ORIENTED_EDGE('',*,*,#70490,.T.); +#70490 = EDGE_CURVE('',#70482,#70491,#70493,.T.); +#70491 = VERTEX_POINT('',#70492); +#70492 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,1.285)); +#70493 = LINE('',#70494,#70495); +#70494 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,0.885)); +#70495 = VECTOR('',#70496,1.); +#70496 = DIRECTION('',(0.,2.2E-16,1.)); +#70497 = ORIENTED_EDGE('',*,*,#70498,.F.); +#70498 = EDGE_CURVE('',#70192,#70491,#70499,.T.); +#70499 = CIRCLE('',#70500,0.45); +#70500 = AXIS2_PLACEMENT_3D('',#70501,#70502,#70503); +#70501 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,1.285)); +#70502 = DIRECTION('',(1.660794737852E-46,2.2E-16,1.)); +#70503 = DIRECTION('',(1.,-5.132E-14,1.12904E-29)); +#70504 = ORIENTED_EDGE('',*,*,#70199,.F.); +#70505 = CYLINDRICAL_SURFACE('',#70506,0.45); +#70506 = AXIS2_PLACEMENT_3D('',#70507,#70508,#70509); +#70507 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,0.885)); +#70508 = DIRECTION('',(0.,2.2E-16,1.)); +#70509 = DIRECTION('',(1.,-5.132E-14,1.12904E-29)); +#70510 = ADVANCED_FACE('',(#70511),#70538,.F.); +#70511 = FACE_BOUND('',#70512,.F.); +#70512 = EDGE_LOOP('',(#70513,#70522,#70530,#70537)); +#70513 = ORIENTED_EDGE('',*,*,#70514,.T.); +#70514 = EDGE_CURVE('',#70277,#70515,#70517,.T.); +#70515 = VERTEX_POINT('',#70516); +#70516 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,1.285)); +#70517 = CIRCLE('',#70518,0.15); +#70518 = AXIS2_PLACEMENT_3D('',#70519,#70520,#70521); +#70519 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,1.285)); +#70520 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70521 = DIRECTION('',(-1.,-1.5373E-13,-2.2E-16)); +#70522 = ORIENTED_EDGE('',*,*,#70523,.T.); +#70523 = EDGE_CURVE('',#70515,#70524,#70526,.T.); +#70524 = VERTEX_POINT('',#70525); +#70525 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,0.885)); +#70526 = LINE('',#70527,#70528); +#70527 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,1.285)); +#70528 = VECTOR('',#70529,1.); +#70529 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70530 = ORIENTED_EDGE('',*,*,#70531,.F.); +#70531 = EDGE_CURVE('',#70286,#70524,#70532,.T.); +#70532 = CIRCLE('',#70533,0.15); +#70533 = AXIS2_PLACEMENT_3D('',#70534,#70535,#70536); +#70534 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,0.885)); +#70535 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70536 = DIRECTION('',(-1.,-1.5373E-13,-2.2E-16)); +#70537 = ORIENTED_EDGE('',*,*,#70293,.F.); +#70538 = CYLINDRICAL_SURFACE('',#70539,0.15); +#70539 = AXIS2_PLACEMENT_3D('',#70540,#70541,#70542); +#70540 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,1.285)); +#70541 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70542 = DIRECTION('',(-1.,-1.5373E-13,-2.2E-16)); +#70543 = ADVANCED_FACE('',(#70544),#70571,.F.); +#70544 = FACE_BOUND('',#70545,.F.); +#70545 = EDGE_LOOP('',(#70546,#70547,#70556,#70564)); +#70546 = ORIENTED_EDGE('',*,*,#70348,.T.); +#70547 = ORIENTED_EDGE('',*,*,#70548,.T.); +#70548 = EDGE_CURVE('',#70341,#70549,#70551,.T.); +#70549 = VERTEX_POINT('',#70550); +#70550 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,0.885)); +#70551 = CIRCLE('',#70552,0.15); +#70552 = AXIS2_PLACEMENT_3D('',#70553,#70554,#70555); +#70553 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,0.885)); +#70554 = DIRECTION('',(1.56131228953E-46,2.2E-16,1.)); +#70555 = DIRECTION('',(1.,-1.5395E-13,3.3869E-29)); +#70556 = ORIENTED_EDGE('',*,*,#70557,.F.); +#70557 = EDGE_CURVE('',#70558,#70549,#70560,.T.); +#70558 = VERTEX_POINT('',#70559); +#70559 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,1.285)); +#70560 = LINE('',#70561,#70562); +#70561 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,1.285)); +#70562 = VECTOR('',#70563,1.); +#70563 = DIRECTION('',(0.,-2.2E-16,-1.)); +#70564 = ORIENTED_EDGE('',*,*,#70565,.F.); +#70565 = EDGE_CURVE('',#70332,#70558,#70566,.T.); +#70566 = CIRCLE('',#70567,0.15); +#70567 = AXIS2_PLACEMENT_3D('',#70568,#70569,#70570); +#70568 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,1.285)); +#70569 = DIRECTION('',(1.56131228953E-46,2.2E-16,1.)); +#70570 = DIRECTION('',(1.,-1.5395E-13,3.3869E-29)); +#70571 = CYLINDRICAL_SURFACE('',#70572,0.15); +#70572 = AXIS2_PLACEMENT_3D('',#70573,#70574,#70575); +#70573 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,1.285)); +#70574 = DIRECTION('',(0.,-2.2E-16,-1.)); +#70575 = DIRECTION('',(1.,-1.5395E-13,3.3869E-29)); +#70576 = ADVANCED_FACE('',(#70577),#70588,.T.); +#70577 = FACE_BOUND('',#70578,.F.); +#70578 = EDGE_LOOP('',(#70579,#70580,#70586,#70587)); +#70579 = ORIENTED_EDGE('',*,*,#70531,.T.); +#70580 = ORIENTED_EDGE('',*,*,#70581,.T.); +#70581 = EDGE_CURVE('',#70524,#70425,#70582,.T.); +#70582 = LINE('',#70583,#70584); +#70583 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,0.885)); +#70584 = VECTOR('',#70585,1.); +#70585 = DIRECTION('',(-0.15047390344,0.988613981483,-1.3E-16)); +#70586 = ORIENTED_EDGE('',*,*,#70432,.F.); +#70587 = ORIENTED_EDGE('',*,*,#70383,.F.); +#70588 = PLANE('',#70589); +#70589 = AXIS2_PLACEMENT_3D('',#70590,#70591,#70592); +#70590 = CARTESIAN_POINT('',(-1.272533130895,0.165521544453,0.885)); +#70591 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70592 = DIRECTION('',(-0.651738481509,-0.758443769649, + 2.347516339081E-17)); +#70593 = ADVANCED_FACE('',(#70594),#70605,.T.); +#70594 = FACE_BOUND('',#70595,.F.); +#70595 = EDGE_LOOP('',(#70596,#70597,#70603,#70604)); +#70596 = ORIENTED_EDGE('',*,*,#70415,.T.); +#70597 = ORIENTED_EDGE('',*,*,#70598,.T.); +#70598 = EDGE_CURVE('',#70416,#70515,#70599,.T.); +#70599 = LINE('',#70600,#70601); +#70600 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,1.285)); +#70601 = VECTOR('',#70602,1.); +#70602 = DIRECTION('',(0.15047390344,-0.988613981483,1.3E-16)); +#70603 = ORIENTED_EDGE('',*,*,#70514,.F.); +#70604 = ORIENTED_EDGE('',*,*,#70400,.F.); +#70605 = PLANE('',#70606); +#70606 = AXIS2_PLACEMENT_3D('',#70607,#70608,#70609); +#70607 = CARTESIAN_POINT('',(-1.272533130895,0.165521544453,1.285)); +#70608 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70609 = DIRECTION('',(-0.651738481509,-0.758443769649, + 2.347516339081E-17)); +#70610 = ADVANCED_FACE('',(#70611),#70636,.F.); +#70611 = FACE_BOUND('',#70612,.T.); +#70612 = EDGE_LOOP('',(#70613,#70621,#70622,#70630)); +#70613 = ORIENTED_EDGE('',*,*,#70614,.F.); +#70614 = EDGE_CURVE('',#70425,#70615,#70617,.T.); +#70615 = VERTEX_POINT('',#70616); +#70616 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70617 = LINE('',#70618,#70619); +#70618 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70619 = VECTOR('',#70620,1.); +#70620 = DIRECTION('',(0.988613981483,0.15047390344,1.9E-16)); +#70621 = ORIENTED_EDGE('',*,*,#70424,.T.); +#70622 = ORIENTED_EDGE('',*,*,#70623,.T.); +#70623 = EDGE_CURVE('',#70416,#70624,#70626,.T.); +#70624 = VERTEX_POINT('',#70625); +#70625 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70626 = LINE('',#70627,#70628); +#70627 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70628 = VECTOR('',#70629,1.); +#70629 = DIRECTION('',(0.988613981483,0.15047390344,1.9E-16)); +#70630 = ORIENTED_EDGE('',*,*,#70631,.F.); +#70631 = EDGE_CURVE('',#70615,#70624,#70632,.T.); +#70632 = LINE('',#70633,#70634); +#70633 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70634 = VECTOR('',#70635,1.); +#70635 = DIRECTION('',(5.6E-16,1.1E-16,1.)); +#70636 = PLANE('',#70637); +#70637 = AXIS2_PLACEMENT_3D('',#70638,#70639,#70640); +#70638 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70639 = DIRECTION('',(0.15047390344,-0.988613981483,2.E-17)); +#70640 = DIRECTION('',(-5.606744469128E-16,-1.055688818294E-16,-1.)); +#70641 = ADVANCED_FACE('',(#70642),#70653,.T.); +#70642 = FACE_BOUND('',#70643,.T.); +#70643 = EDGE_LOOP('',(#70644,#70645,#70651,#70652)); +#70644 = ORIENTED_EDGE('',*,*,#70548,.T.); +#70645 = ORIENTED_EDGE('',*,*,#70646,.T.); +#70646 = EDGE_CURVE('',#70549,#70482,#70647,.T.); +#70647 = LINE('',#70648,#70649); +#70648 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,0.885)); +#70649 = VECTOR('',#70650,1.); +#70650 = DIRECTION('',(0.15047390344,0.988613981483,-9.999999999999E-17) + ); +#70651 = ORIENTED_EDGE('',*,*,#70481,.F.); +#70652 = ORIENTED_EDGE('',*,*,#70450,.F.); +#70653 = PLANE('',#70654); +#70654 = AXIS2_PLACEMENT_3D('',#70655,#70656,#70657); +#70655 = CARTESIAN_POINT('',(7.222533130895,0.165521544453,0.885)); +#70656 = DIRECTION('',(0.,-2.2E-16,-1.)); +#70657 = DIRECTION('',(-0.651738481509,0.758443769649, + -1.668576293229E-16)); +#70658 = ADVANCED_FACE('',(#70659),#70670,.T.); +#70659 = FACE_BOUND('',#70660,.T.); +#70660 = EDGE_LOOP('',(#70661,#70662,#70668,#70669)); +#70661 = ORIENTED_EDGE('',*,*,#70498,.T.); +#70662 = ORIENTED_EDGE('',*,*,#70663,.T.); +#70663 = EDGE_CURVE('',#70491,#70558,#70664,.T.); +#70664 = LINE('',#70665,#70666); +#70665 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,1.285)); +#70666 = VECTOR('',#70667,1.); +#70667 = DIRECTION('',(-0.15047390344,-0.988613981483,9.999999999999E-17 + )); +#70668 = ORIENTED_EDGE('',*,*,#70565,.F.); +#70669 = ORIENTED_EDGE('',*,*,#70467,.F.); +#70670 = PLANE('',#70671); +#70671 = AXIS2_PLACEMENT_3D('',#70672,#70673,#70674); +#70672 = CARTESIAN_POINT('',(7.222533130895,0.165521544453,1.285)); +#70673 = DIRECTION('',(0.,2.2E-16,1.)); +#70674 = DIRECTION('',(-0.651738481509,0.758443769649, + -1.668576293229E-16)); +#70675 = ADVANCED_FACE('',(#70676),#70701,.F.); +#70676 = FACE_BOUND('',#70677,.F.); +#70677 = EDGE_LOOP('',(#70678,#70686,#70687,#70695)); +#70678 = ORIENTED_EDGE('',*,*,#70679,.F.); +#70679 = EDGE_CURVE('',#70482,#70680,#70682,.T.); +#70680 = VERTEX_POINT('',#70681); +#70681 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70682 = LINE('',#70683,#70684); +#70683 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70684 = VECTOR('',#70685,1.); +#70685 = DIRECTION('',(-0.988613981483,0.15047390344,-3.E-17)); +#70686 = ORIENTED_EDGE('',*,*,#70490,.T.); +#70687 = ORIENTED_EDGE('',*,*,#70688,.T.); +#70688 = EDGE_CURVE('',#70491,#70689,#70691,.T.); +#70689 = VERTEX_POINT('',#70690); +#70690 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70691 = LINE('',#70692,#70693); +#70692 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70693 = VECTOR('',#70694,1.); +#70694 = DIRECTION('',(-0.988613981483,0.15047390344,-3.E-17)); +#70695 = ORIENTED_EDGE('',*,*,#70696,.F.); +#70696 = EDGE_CURVE('',#70680,#70689,#70697,.T.); +#70697 = LINE('',#70698,#70699); +#70698 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70699 = VECTOR('',#70700,1.); +#70700 = DIRECTION('',(-7.9E-16,1.1E-16,1.)); +#70701 = PLANE('',#70702); +#70702 = AXIS2_PLACEMENT_3D('',#70703,#70704,#70705); +#70703 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70704 = DIRECTION('',(-0.15047390344,-0.988613981483, + -9.999999999999E-18)); +#70705 = DIRECTION('',(-7.899809130242E-16,1.101254014864E-16,1.)); +#70706 = ADVANCED_FACE('',(#70707),#70732,.F.); +#70707 = FACE_BOUND('',#70708,.T.); +#70708 = EDGE_LOOP('',(#70709,#70717,#70718,#70726)); +#70709 = ORIENTED_EDGE('',*,*,#70710,.F.); +#70710 = EDGE_CURVE('',#70515,#70711,#70713,.T.); +#70711 = VERTEX_POINT('',#70712); +#70712 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70713 = LINE('',#70714,#70715); +#70714 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70715 = VECTOR('',#70716,1.); +#70716 = DIRECTION('',(0.988613981483,0.15047390344,1.9E-16)); +#70717 = ORIENTED_EDGE('',*,*,#70523,.T.); +#70718 = ORIENTED_EDGE('',*,*,#70719,.T.); +#70719 = EDGE_CURVE('',#70524,#70720,#70722,.T.); +#70720 = VERTEX_POINT('',#70721); +#70721 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70722 = LINE('',#70723,#70724); +#70723 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70724 = VECTOR('',#70725,1.); +#70725 = DIRECTION('',(0.988613981483,0.15047390344,-5.7E-16)); +#70726 = ORIENTED_EDGE('',*,*,#70727,.F.); +#70727 = EDGE_CURVE('',#70711,#70720,#70728,.T.); +#70728 = LINE('',#70729,#70730); +#70729 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70730 = VECTOR('',#70731,1.); +#70731 = DIRECTION('',(-5.6E-16,-1.1E-16,-1.)); +#70732 = PLANE('',#70733); +#70733 = AXIS2_PLACEMENT_3D('',#70734,#70735,#70736); +#70734 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70735 = DIRECTION('',(-0.15047390344,0.988613981483,-2.E-17)); +#70736 = DIRECTION('',(5.606744469128E-16,1.055688818294E-16,1.)); +#70737 = ADVANCED_FACE('',(#70738),#70763,.F.); +#70738 = FACE_BOUND('',#70739,.F.); +#70739 = EDGE_LOOP('',(#70740,#70748,#70749,#70757)); +#70740 = ORIENTED_EDGE('',*,*,#70741,.F.); +#70741 = EDGE_CURVE('',#70558,#70742,#70744,.T.); +#70742 = VERTEX_POINT('',#70743); +#70743 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70744 = LINE('',#70745,#70746); +#70745 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70746 = VECTOR('',#70747,1.); +#70747 = DIRECTION('',(-0.988613981483,0.15047390344,-3.E-17)); +#70748 = ORIENTED_EDGE('',*,*,#70557,.T.); +#70749 = ORIENTED_EDGE('',*,*,#70750,.T.); +#70750 = EDGE_CURVE('',#70549,#70751,#70753,.T.); +#70751 = VERTEX_POINT('',#70752); +#70752 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70753 = LINE('',#70754,#70755); +#70754 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70755 = VECTOR('',#70756,1.); +#70756 = DIRECTION('',(-0.988613981483,0.15047390344,-7.899999999999E-16 + )); +#70757 = ORIENTED_EDGE('',*,*,#70758,.F.); +#70758 = EDGE_CURVE('',#70742,#70751,#70759,.T.); +#70759 = LINE('',#70760,#70761); +#70760 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70761 = VECTOR('',#70762,1.); +#70762 = DIRECTION('',(7.9E-16,-1.1E-16,-1.)); +#70763 = PLANE('',#70764); +#70764 = AXIS2_PLACEMENT_3D('',#70765,#70766,#70767); +#70765 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70766 = DIRECTION('',(0.15047390344,0.988613981483,9.999999999999E-18) + ); +#70767 = DIRECTION('',(7.899809130242E-16,-1.101254014864E-16,-1.)); +#70768 = ADVANCED_FACE('',(#70769),#70780,.F.); +#70769 = FACE_BOUND('',#70770,.T.); +#70770 = EDGE_LOOP('',(#70771,#70772,#70773,#70774)); +#70771 = ORIENTED_EDGE('',*,*,#70719,.F.); +#70772 = ORIENTED_EDGE('',*,*,#70581,.T.); +#70773 = ORIENTED_EDGE('',*,*,#70614,.T.); +#70774 = ORIENTED_EDGE('',*,*,#70775,.F.); +#70775 = EDGE_CURVE('',#70720,#70615,#70776,.T.); +#70776 = LINE('',#70777,#70778); +#70777 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70778 = VECTOR('',#70779,1.); +#70779 = DIRECTION('',(-0.15047390344,0.988613981483,-2.E-17)); +#70780 = PLANE('',#70781); +#70781 = AXIS2_PLACEMENT_3D('',#70782,#70783,#70784); +#70782 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70783 = DIRECTION('',(-1.9E-16,-1.E-17,1.)); +#70784 = DIRECTION('',(0.15047390344,-0.988613981483,1.870390183877E-17) + ); +#70785 = ADVANCED_FACE('',(#70786),#70797,.F.); +#70786 = FACE_BOUND('',#70787,.T.); +#70787 = EDGE_LOOP('',(#70788,#70789,#70790,#70791)); +#70788 = ORIENTED_EDGE('',*,*,#70623,.F.); +#70789 = ORIENTED_EDGE('',*,*,#70598,.T.); +#70790 = ORIENTED_EDGE('',*,*,#70710,.T.); +#70791 = ORIENTED_EDGE('',*,*,#70792,.F.); +#70792 = EDGE_CURVE('',#70624,#70711,#70793,.T.); +#70793 = LINE('',#70794,#70795); +#70794 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70795 = VECTOR('',#70796,1.); +#70796 = DIRECTION('',(0.15047390344,-0.988613981483,2.E-17)); +#70797 = PLANE('',#70798); +#70798 = AXIS2_PLACEMENT_3D('',#70799,#70800,#70801); +#70799 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70800 = DIRECTION('',(1.9E-16,1.E-17,-1.)); +#70801 = DIRECTION('',(-0.15047390344,0.988613981483,-1.870390183877E-17 + )); +#70802 = ADVANCED_FACE('',(#70803),#70809,.F.); +#70803 = FACE_BOUND('',#70804,.T.); +#70804 = EDGE_LOOP('',(#70805,#70806,#70807,#70808)); +#70805 = ORIENTED_EDGE('',*,*,#70792,.T.); +#70806 = ORIENTED_EDGE('',*,*,#70727,.T.); +#70807 = ORIENTED_EDGE('',*,*,#70775,.T.); +#70808 = ORIENTED_EDGE('',*,*,#70631,.T.); +#70809 = PLANE('',#70810); +#70810 = AXIS2_PLACEMENT_3D('',#70811,#70812,#70813); +#70811 = CARTESIAN_POINT('',(-0.345,0.38,1.085)); +#70812 = DIRECTION('',(-0.988613981483,-0.15047390344,4.4E-16)); +#70813 = DIRECTION('',(-0.15047390344,0.988613981483,-2.5E-16)); +#70814 = ADVANCED_FACE('',(#70815),#70826,.F.); +#70815 = FACE_BOUND('',#70816,.F.); +#70816 = EDGE_LOOP('',(#70817,#70818,#70819,#70820)); +#70817 = ORIENTED_EDGE('',*,*,#70750,.F.); +#70818 = ORIENTED_EDGE('',*,*,#70646,.T.); +#70819 = ORIENTED_EDGE('',*,*,#70679,.T.); +#70820 = ORIENTED_EDGE('',*,*,#70821,.F.); +#70821 = EDGE_CURVE('',#70751,#70680,#70822,.T.); +#70822 = LINE('',#70823,#70824); +#70823 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70824 = VECTOR('',#70825,1.); +#70825 = DIRECTION('',(0.15047390344,0.988613981483,9.999999999999E-18) + ); +#70826 = PLANE('',#70827); +#70827 = AXIS2_PLACEMENT_3D('',#70828,#70829,#70830); +#70828 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70829 = DIRECTION('',(-3.E-17,-1.E-17,1.)); +#70830 = DIRECTION('',(0.15047390344,0.988613981483,1.440035691803E-17) + ); +#70831 = ADVANCED_FACE('',(#70832),#70843,.F.); +#70832 = FACE_BOUND('',#70833,.F.); +#70833 = EDGE_LOOP('',(#70834,#70835,#70836,#70837)); +#70834 = ORIENTED_EDGE('',*,*,#70688,.F.); +#70835 = ORIENTED_EDGE('',*,*,#70663,.T.); +#70836 = ORIENTED_EDGE('',*,*,#70741,.T.); +#70837 = ORIENTED_EDGE('',*,*,#70838,.F.); +#70838 = EDGE_CURVE('',#70689,#70742,#70839,.T.); +#70839 = LINE('',#70840,#70841); +#70840 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70841 = VECTOR('',#70842,1.); +#70842 = DIRECTION('',(-0.15047390344,-0.988613981483, + -9.999999999999E-18)); +#70843 = PLANE('',#70844); +#70844 = AXIS2_PLACEMENT_3D('',#70845,#70846,#70847); +#70845 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70846 = DIRECTION('',(3.E-17,1.E-17,-1.)); +#70847 = DIRECTION('',(-0.15047390344,-0.988613981483, + -1.440035691803E-17)); +#70848 = ADVANCED_FACE('',(#70849),#70855,.F.); +#70849 = FACE_BOUND('',#70850,.F.); +#70850 = EDGE_LOOP('',(#70851,#70852,#70853,#70854)); +#70851 = ORIENTED_EDGE('',*,*,#70838,.T.); +#70852 = ORIENTED_EDGE('',*,*,#70758,.T.); +#70853 = ORIENTED_EDGE('',*,*,#70821,.T.); +#70854 = ORIENTED_EDGE('',*,*,#70696,.T.); +#70855 = PLANE('',#70856); +#70856 = AXIS2_PLACEMENT_3D('',#70857,#70858,#70859); +#70857 = CARTESIAN_POINT('',(6.295,0.38,1.085)); +#70858 = DIRECTION('',(0.988613981483,-0.15047390344,6.6E-16)); +#70859 = DIRECTION('',(-0.15047390344,-0.988613981483,2.2E-16)); +#70860 = MANIFOLD_SOLID_BREP('',#70861); +#70861 = CLOSED_SHELL('',(#70862,#70950,#71000,#71143,#71183,#71222, + #71253,#71290,#71307,#71339,#71418,#71449,#71480,#71617,#71646, + #71671,#71701,#71732,#71763,#71796,#71827,#71843,#71860,#71892, + #71972,#72003,#72050,#72081,#72128,#72159,#72222,#72253,#72316, + #72347,#72394,#72425,#72472,#72503,#72584,#72606,#72628,#72640, + #72657,#72674,#72696,#72708,#72735,#72752,#72769,#72786,#72808, + #72829,#72846,#72863,#72880,#72901,#72918,#72930,#72948,#72971, + #72989,#73005,#73025,#73056,#73087,#73111,#73128,#73146,#73193, + #73224,#73248,#73272,#73289,#73301,#73325,#73364,#73395,#73432, + #73449,#73461,#73485,#73524,#73555,#73602,#73641,#73688,#73719, + #73766,#73797,#73844,#73875,#73922,#73961,#74008,#74039,#74076, + #74093,#74110,#74127,#74144,#74161,#74178,#74195,#74230,#74247, + #74264,#74282,#74300,#74317,#74335,#74348,#74372,#74411,#74442, + #74479,#74496,#74508,#74532,#74571,#74602,#74639,#74656,#74668, + #74685,#74699,#74711,#74736,#74748,#74768,#74814,#74845,#74876, + #74907,#74931,#74962,#74993,#75010,#75027,#75040,#75057,#75184, + #75215,#75246,#75263,#75280,#75292,#75323,#75354,#75371,#75388, + #75400)); +#70862 = ADVANCED_FACE('',(#70863),#70945,.T.); +#70863 = FACE_BOUND('',#70864,.T.); +#70864 = EDGE_LOOP('',(#70865,#70875,#70883,#70891,#70899,#70907,#70915, + #70923,#70931,#70939)); +#70865 = ORIENTED_EDGE('',*,*,#70866,.F.); +#70866 = EDGE_CURVE('',#70867,#70869,#70871,.T.); +#70867 = VERTEX_POINT('',#70868); +#70868 = CARTESIAN_POINT('',(7.145,-2.115,0.19)); +#70869 = VERTEX_POINT('',#70870); +#70870 = CARTESIAN_POINT('',(7.145,-2.115,1.589999946273)); +#70871 = LINE('',#70872,#70873); +#70872 = CARTESIAN_POINT('',(7.145,-2.115,0.19)); +#70873 = VECTOR('',#70874,1.); +#70874 = DIRECTION('',(0.,0.,1.)); +#70875 = ORIENTED_EDGE('',*,*,#70876,.F.); +#70876 = EDGE_CURVE('',#70877,#70867,#70879,.T.); +#70877 = VERTEX_POINT('',#70878); +#70878 = CARTESIAN_POINT('',(7.145,-0.1,0.19)); +#70879 = LINE('',#70880,#70881); +#70880 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#70881 = VECTOR('',#70882,1.); +#70882 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70883 = ORIENTED_EDGE('',*,*,#70884,.T.); +#70884 = EDGE_CURVE('',#70877,#70885,#70887,.T.); +#70885 = VERTEX_POINT('',#70886); +#70886 = CARTESIAN_POINT('',(7.145,-0.1,1.285)); +#70887 = LINE('',#70888,#70889); +#70888 = CARTESIAN_POINT('',(7.145,-0.1,-1.E-02)); +#70889 = VECTOR('',#70890,1.); +#70890 = DIRECTION('',(0.,0.,1.)); +#70891 = ORIENTED_EDGE('',*,*,#70892,.F.); +#70892 = EDGE_CURVE('',#70893,#70885,#70895,.T.); +#70893 = VERTEX_POINT('',#70894); +#70894 = CARTESIAN_POINT('',(7.145,-0.63,1.285)); +#70895 = LINE('',#70896,#70897); +#70896 = CARTESIAN_POINT('',(7.145,-0.63,1.285)); +#70897 = VECTOR('',#70898,1.); +#70898 = DIRECTION('',(0.,1.,2.2E-16)); +#70899 = ORIENTED_EDGE('',*,*,#70900,.F.); +#70900 = EDGE_CURVE('',#70901,#70893,#70903,.T.); +#70901 = VERTEX_POINT('',#70902); +#70902 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#70903 = LINE('',#70904,#70905); +#70904 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#70905 = VECTOR('',#70906,1.); +#70906 = DIRECTION('',(0.,0.,-1.)); +#70907 = ORIENTED_EDGE('',*,*,#70908,.T.); +#70908 = EDGE_CURVE('',#70901,#70909,#70911,.T.); +#70909 = VERTEX_POINT('',#70910); +#70910 = CARTESIAN_POINT('',(7.145,0.56,1.87)); +#70911 = LINE('',#70912,#70913); +#70912 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#70913 = VECTOR('',#70914,1.); +#70914 = DIRECTION('',(0.,1.,2.2E-16)); +#70915 = ORIENTED_EDGE('',*,*,#70916,.T.); +#70916 = EDGE_CURVE('',#70909,#70917,#70919,.T.); +#70917 = VERTEX_POINT('',#70918); +#70918 = CARTESIAN_POINT('',(7.145,0.56,2.15)); +#70919 = LINE('',#70920,#70921); +#70920 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#70921 = VECTOR('',#70922,1.); +#70922 = DIRECTION('',(0.,0.,1.)); +#70923 = ORIENTED_EDGE('',*,*,#70924,.T.); +#70924 = EDGE_CURVE('',#70917,#70925,#70927,.T.); +#70925 = VERTEX_POINT('',#70926); +#70926 = CARTESIAN_POINT('',(7.145,-2.26,2.15)); +#70927 = LINE('',#70928,#70929); +#70928 = CARTESIAN_POINT('',(7.145,-0.44,2.15)); +#70929 = VECTOR('',#70930,1.); +#70930 = DIRECTION('',(0.,-1.,0.)); +#70931 = ORIENTED_EDGE('',*,*,#70932,.T.); +#70932 = EDGE_CURVE('',#70925,#70933,#70935,.T.); +#70933 = VERTEX_POINT('',#70934); +#70934 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#70935 = LINE('',#70936,#70937); +#70936 = CARTESIAN_POINT('',(7.145,-2.26,3.15)); +#70937 = VECTOR('',#70938,1.); +#70938 = DIRECTION('',(0.,2.2E-16,-1.)); +#70939 = ORIENTED_EDGE('',*,*,#70940,.T.); +#70940 = EDGE_CURVE('',#70933,#70869,#70941,.T.); +#70941 = LINE('',#70942,#70943); +#70942 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#70943 = VECTOR('',#70944,1.); +#70944 = DIRECTION('',(0.,1.,2.2E-16)); +#70945 = PLANE('',#70946); +#70946 = AXIS2_PLACEMENT_3D('',#70947,#70948,#70949); +#70947 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#70948 = DIRECTION('',(1.,0.,0.)); +#70949 = DIRECTION('',(0.,-1.,0.)); +#70950 = ADVANCED_FACE('',(#70951),#70995,.T.); +#70951 = FACE_BOUND('',#70952,.T.); +#70952 = EDGE_LOOP('',(#70953,#70964,#70971,#70972,#70980,#70989)); +#70953 = ORIENTED_EDGE('',*,*,#70954,.T.); +#70954 = EDGE_CURVE('',#70955,#70957,#70959,.T.); +#70955 = VERTEX_POINT('',#70956); +#70956 = CARTESIAN_POINT('',(6.145,-2.26,0.59)); +#70957 = VERTEX_POINT('',#70958); +#70958 = CARTESIAN_POINT('',(7.,-2.26,1.071372002298)); +#70959 = CIRCLE('',#70960,1.); +#70960 = AXIS2_PLACEMENT_3D('',#70961,#70962,#70963); +#70961 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#70962 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70963 = DIRECTION('',(0.,2.2E-16,-1.)); +#70964 = ORIENTED_EDGE('',*,*,#70965,.F.); +#70965 = EDGE_CURVE('',#70869,#70957,#70966,.T.); +#70966 = ELLIPSE('',#70967,1.414213562373,1.); +#70967 = AXIS2_PLACEMENT_3D('',#70968,#70969,#70970); +#70968 = CARTESIAN_POINT('',(6.145,-3.115,1.59)); +#70969 = DIRECTION('',(-0.707106781187,0.707106781187,2.999999999998E-17 + )); +#70970 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.799999999998E-16)); +#70971 = ORIENTED_EDGE('',*,*,#70940,.F.); +#70972 = ORIENTED_EDGE('',*,*,#70973,.T.); +#70973 = EDGE_CURVE('',#70933,#70974,#70976,.T.); +#70974 = VERTEX_POINT('',#70975); +#70975 = CARTESIAN_POINT('',(7.145,-3.93,1.59)); +#70976 = LINE('',#70977,#70978); +#70977 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#70978 = VECTOR('',#70979,1.); +#70979 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70980 = ORIENTED_EDGE('',*,*,#70981,.T.); +#70981 = EDGE_CURVE('',#70974,#70982,#70984,.T.); +#70982 = VERTEX_POINT('',#70983); +#70983 = CARTESIAN_POINT('',(6.145,-3.93,0.59)); +#70984 = CIRCLE('',#70985,1.); +#70985 = AXIS2_PLACEMENT_3D('',#70986,#70987,#70988); +#70986 = CARTESIAN_POINT('',(6.145,-3.93,1.59)); +#70987 = DIRECTION('',(0.,1.,3.5E-16)); +#70988 = DIRECTION('',(1.,-7.7E-32,2.2E-16)); +#70989 = ORIENTED_EDGE('',*,*,#70990,.F.); +#70990 = EDGE_CURVE('',#70955,#70982,#70991,.T.); +#70991 = LINE('',#70992,#70993); +#70992 = CARTESIAN_POINT('',(6.145,-2.26,0.59)); +#70993 = VECTOR('',#70994,1.); +#70994 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70995 = CYLINDRICAL_SURFACE('',#70996,1.); +#70996 = AXIS2_PLACEMENT_3D('',#70997,#70998,#70999); +#70997 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#70998 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70999 = DIRECTION('',(0.,2.2E-16,-1.)); +#71000 = ADVANCED_FACE('',(#71001),#71138,.F.); +#71001 = FACE_BOUND('',#71002,.F.); +#71002 = EDGE_LOOP('',(#71003,#71013,#71019,#71020,#71028,#71036,#71044, + #71052,#71060,#71068,#71076,#71084,#71092,#71100,#71108,#71116, + #71124,#71132)); +#71003 = ORIENTED_EDGE('',*,*,#71004,.T.); +#71004 = EDGE_CURVE('',#71005,#71007,#71009,.T.); +#71005 = VERTEX_POINT('',#71006); +#71006 = CARTESIAN_POINT('',(-0.195,-2.26,0.59)); +#71007 = VERTEX_POINT('',#71008); +#71008 = CARTESIAN_POINT('',(-0.195,-3.93,0.59)); +#71009 = LINE('',#71010,#71011); +#71010 = CARTESIAN_POINT('',(-0.195,-2.26,0.59)); +#71011 = VECTOR('',#71012,1.); +#71012 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71013 = ORIENTED_EDGE('',*,*,#71014,.F.); +#71014 = EDGE_CURVE('',#70982,#71007,#71015,.T.); +#71015 = LINE('',#71016,#71017); +#71016 = CARTESIAN_POINT('',(6.145,-3.93,0.59)); +#71017 = VECTOR('',#71018,1.); +#71018 = DIRECTION('',(-1.,0.,0.)); +#71019 = ORIENTED_EDGE('',*,*,#70990,.F.); +#71020 = ORIENTED_EDGE('',*,*,#71021,.F.); +#71021 = EDGE_CURVE('',#71022,#70955,#71024,.T.); +#71022 = VERTEX_POINT('',#71023); +#71023 = CARTESIAN_POINT('',(6.1,-2.26,0.59)); +#71024 = LINE('',#71025,#71026); +#71025 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71026 = VECTOR('',#71027,1.); +#71027 = DIRECTION('',(1.,0.,0.)); +#71028 = ORIENTED_EDGE('',*,*,#71029,.F.); +#71029 = EDGE_CURVE('',#71030,#71022,#71032,.T.); +#71030 = VERTEX_POINT('',#71031); +#71031 = CARTESIAN_POINT('',(5.8,-2.26,0.59)); +#71032 = LINE('',#71033,#71034); +#71033 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71034 = VECTOR('',#71035,1.); +#71035 = DIRECTION('',(1.,0.,0.)); +#71036 = ORIENTED_EDGE('',*,*,#71037,.F.); +#71037 = EDGE_CURVE('',#71038,#71030,#71040,.T.); +#71038 = VERTEX_POINT('',#71039); +#71039 = CARTESIAN_POINT('',(5.25,-2.26,0.59)); +#71040 = LINE('',#71041,#71042); +#71041 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71042 = VECTOR('',#71043,1.); +#71043 = DIRECTION('',(1.,0.,0.)); +#71044 = ORIENTED_EDGE('',*,*,#71045,.F.); +#71045 = EDGE_CURVE('',#71046,#71038,#71048,.T.); +#71046 = VERTEX_POINT('',#71047); +#71047 = CARTESIAN_POINT('',(4.95,-2.26,0.59)); +#71048 = LINE('',#71049,#71050); +#71049 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71050 = VECTOR('',#71051,1.); +#71051 = DIRECTION('',(1.,0.,0.)); +#71052 = ORIENTED_EDGE('',*,*,#71053,.F.); +#71053 = EDGE_CURVE('',#71054,#71046,#71056,.T.); +#71054 = VERTEX_POINT('',#71055); +#71055 = CARTESIAN_POINT('',(4.4,-2.26,0.59)); +#71056 = LINE('',#71057,#71058); +#71057 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71058 = VECTOR('',#71059,1.); +#71059 = DIRECTION('',(1.,0.,0.)); +#71060 = ORIENTED_EDGE('',*,*,#71061,.F.); +#71061 = EDGE_CURVE('',#71062,#71054,#71064,.T.); +#71062 = VERTEX_POINT('',#71063); +#71063 = CARTESIAN_POINT('',(4.275,-2.26,0.59)); +#71064 = LINE('',#71065,#71066); +#71065 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71066 = VECTOR('',#71067,1.); +#71067 = DIRECTION('',(1.,0.,0.)); +#71068 = ORIENTED_EDGE('',*,*,#71069,.T.); +#71069 = EDGE_CURVE('',#71062,#71070,#71072,.T.); +#71070 = VERTEX_POINT('',#71071); +#71071 = CARTESIAN_POINT('',(4.275,-2.76,0.59)); +#71072 = LINE('',#71073,#71074); +#71073 = CARTESIAN_POINT('',(4.275,-2.26,0.59)); +#71074 = VECTOR('',#71075,1.); +#71075 = DIRECTION('',(0.,-1.,2.2E-16)); +#71076 = ORIENTED_EDGE('',*,*,#71077,.F.); +#71077 = EDGE_CURVE('',#71078,#71070,#71080,.T.); +#71078 = VERTEX_POINT('',#71079); +#71079 = CARTESIAN_POINT('',(1.675,-2.76,0.59)); +#71080 = LINE('',#71081,#71082); +#71081 = CARTESIAN_POINT('',(1.675,-2.76,0.59)); +#71082 = VECTOR('',#71083,1.); +#71083 = DIRECTION('',(1.,0.,0.)); +#71084 = ORIENTED_EDGE('',*,*,#71085,.F.); +#71085 = EDGE_CURVE('',#71086,#71078,#71088,.T.); +#71086 = VERTEX_POINT('',#71087); +#71087 = CARTESIAN_POINT('',(1.675,-2.26,0.59)); +#71088 = LINE('',#71089,#71090); +#71089 = CARTESIAN_POINT('',(1.675,-2.26,0.59)); +#71090 = VECTOR('',#71091,1.); +#71091 = DIRECTION('',(0.,-1.,2.2E-16)); +#71092 = ORIENTED_EDGE('',*,*,#71093,.F.); +#71093 = EDGE_CURVE('',#71094,#71086,#71096,.T.); +#71094 = VERTEX_POINT('',#71095); +#71095 = CARTESIAN_POINT('',(1.55,-2.26,0.59)); +#71096 = LINE('',#71097,#71098); +#71097 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71098 = VECTOR('',#71099,1.); +#71099 = DIRECTION('',(1.,0.,0.)); +#71100 = ORIENTED_EDGE('',*,*,#71101,.F.); +#71101 = EDGE_CURVE('',#71102,#71094,#71104,.T.); +#71102 = VERTEX_POINT('',#71103); +#71103 = CARTESIAN_POINT('',(1.,-2.26,0.59)); +#71104 = LINE('',#71105,#71106); +#71105 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71106 = VECTOR('',#71107,1.); +#71107 = DIRECTION('',(1.,0.,0.)); +#71108 = ORIENTED_EDGE('',*,*,#71109,.F.); +#71109 = EDGE_CURVE('',#71110,#71102,#71112,.T.); +#71110 = VERTEX_POINT('',#71111); +#71111 = CARTESIAN_POINT('',(0.7,-2.26,0.59)); +#71112 = LINE('',#71113,#71114); +#71113 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71114 = VECTOR('',#71115,1.); +#71115 = DIRECTION('',(1.,0.,0.)); +#71116 = ORIENTED_EDGE('',*,*,#71117,.F.); +#71117 = EDGE_CURVE('',#71118,#71110,#71120,.T.); +#71118 = VERTEX_POINT('',#71119); +#71119 = CARTESIAN_POINT('',(0.15,-2.26,0.59)); +#71120 = LINE('',#71121,#71122); +#71121 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71122 = VECTOR('',#71123,1.); +#71123 = DIRECTION('',(1.,0.,0.)); +#71124 = ORIENTED_EDGE('',*,*,#71125,.F.); +#71125 = EDGE_CURVE('',#71126,#71118,#71128,.T.); +#71126 = VERTEX_POINT('',#71127); +#71127 = CARTESIAN_POINT('',(-0.15,-2.26,0.59)); +#71128 = LINE('',#71129,#71130); +#71129 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71130 = VECTOR('',#71131,1.); +#71131 = DIRECTION('',(1.,0.,0.)); +#71132 = ORIENTED_EDGE('',*,*,#71133,.F.); +#71133 = EDGE_CURVE('',#71005,#71126,#71134,.T.); +#71134 = LINE('',#71135,#71136); +#71135 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71136 = VECTOR('',#71137,1.); +#71137 = DIRECTION('',(1.,0.,0.)); +#71138 = PLANE('',#71139); +#71139 = AXIS2_PLACEMENT_3D('',#71140,#71141,#71142); +#71140 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71141 = DIRECTION('',(0.,-2.2E-16,1.)); +#71142 = DIRECTION('',(1.,0.,0.)); +#71143 = ADVANCED_FACE('',(#71144),#71178,.F.); +#71144 = FACE_BOUND('',#71145,.F.); +#71145 = EDGE_LOOP('',(#71146,#71156,#71164,#71171,#71172)); +#71146 = ORIENTED_EDGE('',*,*,#71147,.F.); +#71147 = EDGE_CURVE('',#71148,#71150,#71152,.T.); +#71148 = VERTEX_POINT('',#71149); +#71149 = CARTESIAN_POINT('',(-1.05,-2.26,0.19)); +#71150 = VERTEX_POINT('',#71151); +#71151 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#71152 = LINE('',#71153,#71154); +#71153 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#71154 = VECTOR('',#71155,1.); +#71155 = DIRECTION('',(1.,0.,0.)); +#71156 = ORIENTED_EDGE('',*,*,#71157,.T.); +#71157 = EDGE_CURVE('',#71148,#71158,#71160,.T.); +#71158 = VERTEX_POINT('',#71159); +#71159 = CARTESIAN_POINT('',(-1.05,-2.26,1.071372002298)); +#71160 = LINE('',#71161,#71162); +#71161 = CARTESIAN_POINT('',(-1.05,-2.26,0.19)); +#71162 = VECTOR('',#71163,1.); +#71163 = DIRECTION('',(0.,0.,1.)); +#71164 = ORIENTED_EDGE('',*,*,#71165,.T.); +#71165 = EDGE_CURVE('',#71158,#71005,#71166,.T.); +#71166 = CIRCLE('',#71167,1.); +#71167 = AXIS2_PLACEMENT_3D('',#71168,#71169,#71170); +#71168 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#71169 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71170 = DIRECTION('',(0.,2.2E-16,-1.)); +#71171 = ORIENTED_EDGE('',*,*,#71133,.T.); +#71172 = ORIENTED_EDGE('',*,*,#71173,.F.); +#71173 = EDGE_CURVE('',#71150,#71126,#71174,.T.); +#71174 = LINE('',#71175,#71176); +#71175 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#71176 = VECTOR('',#71177,1.); +#71177 = DIRECTION('',(0.,0.,1.)); +#71178 = PLANE('',#71179); +#71179 = AXIS2_PLACEMENT_3D('',#71180,#71181,#71182); +#71180 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#71181 = DIRECTION('',(0.,1.,0.)); +#71182 = DIRECTION('',(1.,0.,0.)); +#71183 = ADVANCED_FACE('',(#71184),#71217,.T.); +#71184 = FACE_BOUND('',#71185,.T.); +#71185 = EDGE_LOOP('',(#71186,#71196,#71204,#71210,#71211)); +#71186 = ORIENTED_EDGE('',*,*,#71187,.T.); +#71187 = EDGE_CURVE('',#71188,#71190,#71192,.T.); +#71188 = VERTEX_POINT('',#71189); +#71189 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71190 = VERTEX_POINT('',#71191); +#71191 = CARTESIAN_POINT('',(-0.15,-1.96,1.59)); +#71192 = LINE('',#71193,#71194); +#71193 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71194 = VECTOR('',#71195,1.); +#71195 = DIRECTION('',(0.,0.,1.)); +#71196 = ORIENTED_EDGE('',*,*,#71197,.T.); +#71197 = EDGE_CURVE('',#71190,#71198,#71200,.T.); +#71198 = VERTEX_POINT('',#71199); +#71199 = CARTESIAN_POINT('',(-0.15,-2.26,1.59)); +#71200 = LINE('',#71201,#71202); +#71201 = CARTESIAN_POINT('',(-0.15,-1.96,1.59)); +#71202 = VECTOR('',#71203,1.); +#71203 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71204 = ORIENTED_EDGE('',*,*,#71205,.F.); +#71205 = EDGE_CURVE('',#71126,#71198,#71206,.T.); +#71206 = LINE('',#71207,#71208); +#71207 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#71208 = VECTOR('',#71209,1.); +#71209 = DIRECTION('',(0.,0.,1.)); +#71210 = ORIENTED_EDGE('',*,*,#71173,.F.); +#71211 = ORIENTED_EDGE('',*,*,#71212,.F.); +#71212 = EDGE_CURVE('',#71188,#71150,#71213,.T.); +#71213 = LINE('',#71214,#71215); +#71214 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71215 = VECTOR('',#71216,1.); +#71216 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71217 = PLANE('',#71218); +#71218 = AXIS2_PLACEMENT_3D('',#71219,#71220,#71221); +#71219 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71220 = DIRECTION('',(1.,0.,0.)); +#71221 = DIRECTION('',(0.,-1.,0.)); +#71222 = ADVANCED_FACE('',(#71223),#71248,.F.); +#71223 = FACE_BOUND('',#71224,.F.); +#71224 = EDGE_LOOP('',(#71225,#71233,#71241,#71247)); +#71225 = ORIENTED_EDGE('',*,*,#71226,.T.); +#71226 = EDGE_CURVE('',#71198,#71227,#71229,.T.); +#71227 = VERTEX_POINT('',#71228); +#71228 = CARTESIAN_POINT('',(0.15,-2.26,1.59)); +#71229 = LINE('',#71230,#71231); +#71230 = CARTESIAN_POINT('',(-0.15,-2.26,1.59)); +#71231 = VECTOR('',#71232,1.); +#71232 = DIRECTION('',(1.,0.,0.)); +#71233 = ORIENTED_EDGE('',*,*,#71234,.T.); +#71234 = EDGE_CURVE('',#71227,#71235,#71237,.T.); +#71235 = VERTEX_POINT('',#71236); +#71236 = CARTESIAN_POINT('',(0.15,-1.96,1.59)); +#71237 = LINE('',#71238,#71239); +#71238 = CARTESIAN_POINT('',(0.15,-2.26,1.59)); +#71239 = VECTOR('',#71240,1.); +#71240 = DIRECTION('',(0.,1.,2.2E-16)); +#71241 = ORIENTED_EDGE('',*,*,#71242,.T.); +#71242 = EDGE_CURVE('',#71235,#71190,#71243,.T.); +#71243 = LINE('',#71244,#71245); +#71244 = CARTESIAN_POINT('',(0.15,-1.96,1.59)); +#71245 = VECTOR('',#71246,1.); +#71246 = DIRECTION('',(-1.,0.,0.)); +#71247 = ORIENTED_EDGE('',*,*,#71197,.T.); +#71248 = PLANE('',#71249); +#71249 = AXIS2_PLACEMENT_3D('',#71250,#71251,#71252); +#71250 = CARTESIAN_POINT('',(-4.440892098501E-16,-2.11,1.59)); +#71251 = DIRECTION('',(0.,-2.2E-16,1.)); +#71252 = DIRECTION('',(1.,0.,0.)); +#71253 = ADVANCED_FACE('',(#71254),#71285,.T.); +#71254 = FACE_BOUND('',#71255,.T.); +#71255 = EDGE_LOOP('',(#71256,#71264,#71270,#71271,#71279)); +#71256 = ORIENTED_EDGE('',*,*,#71257,.T.); +#71257 = EDGE_CURVE('',#71258,#71118,#71260,.T.); +#71258 = VERTEX_POINT('',#71259); +#71259 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71260 = LINE('',#71261,#71262); +#71261 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71262 = VECTOR('',#71263,1.); +#71263 = DIRECTION('',(0.,0.,1.)); +#71264 = ORIENTED_EDGE('',*,*,#71265,.T.); +#71265 = EDGE_CURVE('',#71118,#71227,#71266,.T.); +#71266 = LINE('',#71267,#71268); +#71267 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71268 = VECTOR('',#71269,1.); +#71269 = DIRECTION('',(0.,0.,1.)); +#71270 = ORIENTED_EDGE('',*,*,#71234,.T.); +#71271 = ORIENTED_EDGE('',*,*,#71272,.F.); +#71272 = EDGE_CURVE('',#71273,#71235,#71275,.T.); +#71273 = VERTEX_POINT('',#71274); +#71274 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71275 = LINE('',#71276,#71277); +#71276 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71277 = VECTOR('',#71278,1.); +#71278 = DIRECTION('',(0.,0.,1.)); +#71279 = ORIENTED_EDGE('',*,*,#71280,.F.); +#71280 = EDGE_CURVE('',#71258,#71273,#71281,.T.); +#71281 = LINE('',#71282,#71283); +#71282 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71283 = VECTOR('',#71284,1.); +#71284 = DIRECTION('',(0.,1.,2.2E-16)); +#71285 = PLANE('',#71286); +#71286 = AXIS2_PLACEMENT_3D('',#71287,#71288,#71289); +#71287 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71288 = DIRECTION('',(-1.,0.,0.)); +#71289 = DIRECTION('',(0.,1.,0.)); +#71290 = ADVANCED_FACE('',(#71291),#71302,.T.); +#71291 = FACE_BOUND('',#71292,.T.); +#71292 = EDGE_LOOP('',(#71293,#71294,#71295,#71296)); +#71293 = ORIENTED_EDGE('',*,*,#71272,.T.); +#71294 = ORIENTED_EDGE('',*,*,#71242,.T.); +#71295 = ORIENTED_EDGE('',*,*,#71187,.F.); +#71296 = ORIENTED_EDGE('',*,*,#71297,.F.); +#71297 = EDGE_CURVE('',#71273,#71188,#71298,.T.); +#71298 = LINE('',#71299,#71300); +#71299 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71300 = VECTOR('',#71301,1.); +#71301 = DIRECTION('',(-1.,0.,0.)); +#71302 = PLANE('',#71303); +#71303 = AXIS2_PLACEMENT_3D('',#71304,#71305,#71306); +#71304 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71305 = DIRECTION('',(0.,-1.,0.)); +#71306 = DIRECTION('',(-1.,0.,0.)); +#71307 = ADVANCED_FACE('',(#71308),#71334,.T.); +#71308 = FACE_BOUND('',#71309,.T.); +#71309 = EDGE_LOOP('',(#71310,#71318,#71319,#71328)); +#71310 = ORIENTED_EDGE('',*,*,#71311,.F.); +#71311 = EDGE_CURVE('',#71148,#71312,#71314,.T.); +#71312 = VERTEX_POINT('',#71313); +#71313 = CARTESIAN_POINT('',(-1.195,-2.115,0.19)); +#71314 = LINE('',#71315,#71316); +#71315 = CARTESIAN_POINT('',(-0.4325,-2.8775,0.19)); +#71316 = VECTOR('',#71317,1.); +#71317 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#71318 = ORIENTED_EDGE('',*,*,#71157,.T.); +#71319 = ORIENTED_EDGE('',*,*,#71320,.T.); +#71320 = EDGE_CURVE('',#71158,#71321,#71323,.T.); +#71321 = VERTEX_POINT('',#71322); +#71322 = CARTESIAN_POINT('',(-1.195,-2.115,1.589999946273)); +#71323 = ELLIPSE('',#71324,1.414213562373,1.); +#71324 = AXIS2_PLACEMENT_3D('',#71325,#71326,#71327); +#71325 = CARTESIAN_POINT('',(-0.195,-3.115,1.59)); +#71326 = DIRECTION('',(0.707106781187,0.707106781187,2.999999999998E-17) + ); +#71327 = DIRECTION('',(0.707106781187,-0.707106781187, + -2.799999999998E-16)); +#71328 = ORIENTED_EDGE('',*,*,#71329,.F.); +#71329 = EDGE_CURVE('',#71312,#71321,#71330,.T.); +#71330 = LINE('',#71331,#71332); +#71331 = CARTESIAN_POINT('',(-1.195,-2.115,0.19)); +#71332 = VECTOR('',#71333,1.); +#71333 = DIRECTION('',(0.,0.,1.)); +#71334 = PLANE('',#71335); +#71335 = AXIS2_PLACEMENT_3D('',#71336,#71337,#71338); +#71336 = CARTESIAN_POINT('',(-1.1225,-2.1875,0.19)); +#71337 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.999999999998E-17)); +#71338 = DIRECTION('',(-2.121320343558E-17,-2.121320343558E-17,1.)); +#71339 = ADVANCED_FACE('',(#71340),#71413,.F.); +#71340 = FACE_BOUND('',#71341,.F.); +#71341 = EDGE_LOOP('',(#71342,#71343,#71351,#71359,#71367,#71375,#71383, + #71391,#71399,#71407)); +#71342 = ORIENTED_EDGE('',*,*,#71329,.F.); +#71343 = ORIENTED_EDGE('',*,*,#71344,.F.); +#71344 = EDGE_CURVE('',#71345,#71312,#71347,.T.); +#71345 = VERTEX_POINT('',#71346); +#71346 = CARTESIAN_POINT('',(-1.195,-0.1,0.19)); +#71347 = LINE('',#71348,#71349); +#71348 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#71349 = VECTOR('',#71350,1.); +#71350 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71351 = ORIENTED_EDGE('',*,*,#71352,.T.); +#71352 = EDGE_CURVE('',#71345,#71353,#71355,.T.); +#71353 = VERTEX_POINT('',#71354); +#71354 = CARTESIAN_POINT('',(-1.195,-0.1,1.285)); +#71355 = LINE('',#71356,#71357); +#71356 = CARTESIAN_POINT('',(-1.195,-0.1,-1.E-02)); +#71357 = VECTOR('',#71358,1.); +#71358 = DIRECTION('',(0.,0.,1.)); +#71359 = ORIENTED_EDGE('',*,*,#71360,.T.); +#71360 = EDGE_CURVE('',#71353,#71361,#71363,.T.); +#71361 = VERTEX_POINT('',#71362); +#71362 = CARTESIAN_POINT('',(-1.195,-0.63,1.285)); +#71363 = LINE('',#71364,#71365); +#71364 = CARTESIAN_POINT('',(-1.195,0.56,1.285)); +#71365 = VECTOR('',#71366,1.); +#71366 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71367 = ORIENTED_EDGE('',*,*,#71368,.F.); +#71368 = EDGE_CURVE('',#71369,#71361,#71371,.T.); +#71369 = VERTEX_POINT('',#71370); +#71370 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#71371 = LINE('',#71372,#71373); +#71372 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#71373 = VECTOR('',#71374,1.); +#71374 = DIRECTION('',(0.,0.,-1.)); +#71375 = ORIENTED_EDGE('',*,*,#71376,.F.); +#71376 = EDGE_CURVE('',#71377,#71369,#71379,.T.); +#71377 = VERTEX_POINT('',#71378); +#71378 = CARTESIAN_POINT('',(-1.195,0.56,1.87)); +#71379 = LINE('',#71380,#71381); +#71380 = CARTESIAN_POINT('',(-1.195,0.56,1.87)); +#71381 = VECTOR('',#71382,1.); +#71382 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71383 = ORIENTED_EDGE('',*,*,#71384,.T.); +#71384 = EDGE_CURVE('',#71377,#71385,#71387,.T.); +#71385 = VERTEX_POINT('',#71386); +#71386 = CARTESIAN_POINT('',(-1.195,0.56,2.15)); +#71387 = LINE('',#71388,#71389); +#71388 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#71389 = VECTOR('',#71390,1.); +#71390 = DIRECTION('',(0.,0.,1.)); +#71391 = ORIENTED_EDGE('',*,*,#71392,.T.); +#71392 = EDGE_CURVE('',#71385,#71393,#71395,.T.); +#71393 = VERTEX_POINT('',#71394); +#71394 = CARTESIAN_POINT('',(-1.195,-2.26,2.15)); +#71395 = LINE('',#71396,#71397); +#71396 = CARTESIAN_POINT('',(-1.195,-0.44,2.15)); +#71397 = VECTOR('',#71398,1.); +#71398 = DIRECTION('',(0.,-1.,0.)); +#71399 = ORIENTED_EDGE('',*,*,#71400,.T.); +#71400 = EDGE_CURVE('',#71393,#71401,#71403,.T.); +#71401 = VERTEX_POINT('',#71402); +#71402 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#71403 = LINE('',#71404,#71405); +#71404 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71405 = VECTOR('',#71406,1.); +#71406 = DIRECTION('',(0.,2.2E-16,-1.)); +#71407 = ORIENTED_EDGE('',*,*,#71408,.T.); +#71408 = EDGE_CURVE('',#71401,#71321,#71409,.T.); +#71409 = LINE('',#71410,#71411); +#71410 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#71411 = VECTOR('',#71412,1.); +#71412 = DIRECTION('',(0.,1.,2.2E-16)); +#71413 = PLANE('',#71414); +#71414 = AXIS2_PLACEMENT_3D('',#71415,#71416,#71417); +#71415 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#71416 = DIRECTION('',(1.,0.,0.)); +#71417 = DIRECTION('',(0.,-1.,0.)); +#71418 = ADVANCED_FACE('',(#71419),#71444,.F.); +#71419 = FACE_BOUND('',#71420,.F.); +#71420 = EDGE_LOOP('',(#71421,#71429,#71437,#71443)); +#71421 = ORIENTED_EDGE('',*,*,#71422,.T.); +#71422 = EDGE_CURVE('',#71393,#71423,#71425,.T.); +#71423 = VERTEX_POINT('',#71424); +#71424 = CARTESIAN_POINT('',(-1.195,-3.93,2.15)); +#71425 = LINE('',#71426,#71427); +#71426 = CARTESIAN_POINT('',(-1.195,-2.26,2.15)); +#71427 = VECTOR('',#71428,1.); +#71428 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71429 = ORIENTED_EDGE('',*,*,#71430,.F.); +#71430 = EDGE_CURVE('',#71431,#71423,#71433,.T.); +#71431 = VERTEX_POINT('',#71432); +#71432 = CARTESIAN_POINT('',(-1.195,-3.93,1.59)); +#71433 = LINE('',#71434,#71435); +#71434 = CARTESIAN_POINT('',(-1.195,-3.93,1.59)); +#71435 = VECTOR('',#71436,1.); +#71436 = DIRECTION('',(0.,-2.2E-16,1.)); +#71437 = ORIENTED_EDGE('',*,*,#71438,.F.); +#71438 = EDGE_CURVE('',#71401,#71431,#71439,.T.); +#71439 = LINE('',#71440,#71441); +#71440 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#71441 = VECTOR('',#71442,1.); +#71442 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71443 = ORIENTED_EDGE('',*,*,#71400,.F.); +#71444 = PLANE('',#71445); +#71445 = AXIS2_PLACEMENT_3D('',#71446,#71447,#71448); +#71446 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71447 = DIRECTION('',(1.,0.,0.)); +#71448 = DIRECTION('',(0.,2.2E-16,-1.)); +#71449 = ADVANCED_FACE('',(#71450),#71475,.T.); +#71450 = FACE_BOUND('',#71451,.F.); +#71451 = EDGE_LOOP('',(#71452,#71460,#71461,#71469)); +#71452 = ORIENTED_EDGE('',*,*,#71453,.F.); +#71453 = EDGE_CURVE('',#71431,#71454,#71456,.T.); +#71454 = VERTEX_POINT('',#71455); +#71455 = CARTESIAN_POINT('',(-1.065,-4.06,1.59)); +#71456 = LINE('',#71457,#71458); +#71457 = CARTESIAN_POINT('',(-1.195,-3.93,1.59)); +#71458 = VECTOR('',#71459,1.); +#71459 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.999999999999E-16)); +#71460 = ORIENTED_EDGE('',*,*,#71430,.T.); +#71461 = ORIENTED_EDGE('',*,*,#71462,.T.); +#71462 = EDGE_CURVE('',#71423,#71463,#71465,.T.); +#71463 = VERTEX_POINT('',#71464); +#71464 = CARTESIAN_POINT('',(-1.065,-4.06,2.15)); +#71465 = LINE('',#71466,#71467); +#71466 = CARTESIAN_POINT('',(-1.13,-3.995,2.15)); +#71467 = VECTOR('',#71468,1.); +#71468 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#71469 = ORIENTED_EDGE('',*,*,#71470,.F.); +#71470 = EDGE_CURVE('',#71454,#71463,#71471,.T.); +#71471 = LINE('',#71472,#71473); +#71472 = CARTESIAN_POINT('',(-1.065,-4.06,1.59)); +#71473 = VECTOR('',#71474,1.); +#71474 = DIRECTION('',(0.,-2.2E-16,1.)); +#71475 = PLANE('',#71476); +#71476 = AXIS2_PLACEMENT_3D('',#71477,#71478,#71479); +#71477 = CARTESIAN_POINT('',(-1.13,-3.995,1.59)); +#71478 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.199999999999E-16)); +#71479 = DIRECTION('',(4.056349186096E-17,2.705634918609E-16,-1.)); +#71480 = ADVANCED_FACE('',(#71481,#71551),#71612,.F.); +#71481 = FACE_BOUND('',#71482,.F.); +#71482 = EDGE_LOOP('',(#71483,#71493,#71502,#71510,#71519,#71527,#71536, + #71544)); +#71483 = ORIENTED_EDGE('',*,*,#71484,.F.); +#71484 = EDGE_CURVE('',#71485,#71487,#71489,.T.); +#71485 = VERTEX_POINT('',#71486); +#71486 = CARTESIAN_POINT('',(-0.1,-4.06,2.469999999982)); +#71487 = VERTEX_POINT('',#71488); +#71488 = CARTESIAN_POINT('',(6.05,-4.06,2.469999999982)); +#71489 = LINE('',#71490,#71491); +#71490 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#71491 = VECTOR('',#71492,1.); +#71492 = DIRECTION('',(1.,0.,0.)); +#71493 = ORIENTED_EDGE('',*,*,#71494,.T.); +#71494 = EDGE_CURVE('',#71485,#71495,#71497,.T.); +#71495 = VERTEX_POINT('',#71496); +#71496 = CARTESIAN_POINT('',(-0.37,-4.06,2.199999999982)); +#71497 = CIRCLE('',#71498,0.27); +#71498 = AXIS2_PLACEMENT_3D('',#71499,#71500,#71501); +#71499 = CARTESIAN_POINT('',(-0.1,-4.06,2.199999999982)); +#71500 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71501 = DIRECTION('',(0.,2.2E-16,-1.)); +#71502 = ORIENTED_EDGE('',*,*,#71503,.T.); +#71503 = EDGE_CURVE('',#71495,#71504,#71506,.T.); +#71504 = VERTEX_POINT('',#71505); +#71505 = CARTESIAN_POINT('',(-0.37,-4.06,1.539999999982)); +#71506 = LINE('',#71507,#71508); +#71507 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#71508 = VECTOR('',#71509,1.); +#71509 = DIRECTION('',(0.,2.2E-16,-1.)); +#71510 = ORIENTED_EDGE('',*,*,#71511,.F.); +#71511 = EDGE_CURVE('',#71512,#71504,#71514,.T.); +#71512 = VERTEX_POINT('',#71513); +#71513 = CARTESIAN_POINT('',(-0.1,-4.06,1.269999999982)); +#71514 = CIRCLE('',#71515,0.27); +#71515 = AXIS2_PLACEMENT_3D('',#71516,#71517,#71518); +#71516 = CARTESIAN_POINT('',(-0.1,-4.06,1.539999999982)); +#71517 = DIRECTION('',(0.,1.,2.2E-16)); +#71518 = DIRECTION('',(0.,2.2E-16,-1.)); +#71519 = ORIENTED_EDGE('',*,*,#71520,.T.); +#71520 = EDGE_CURVE('',#71512,#71521,#71523,.T.); +#71521 = VERTEX_POINT('',#71522); +#71522 = CARTESIAN_POINT('',(6.05,-4.06,1.269999999982)); +#71523 = LINE('',#71524,#71525); +#71524 = CARTESIAN_POINT('',(-0.370000000078,-4.06,1.269999999982)); +#71525 = VECTOR('',#71526,1.); +#71526 = DIRECTION('',(1.,0.,0.)); +#71527 = ORIENTED_EDGE('',*,*,#71528,.F.); +#71528 = EDGE_CURVE('',#71529,#71521,#71531,.T.); +#71529 = VERTEX_POINT('',#71530); +#71530 = CARTESIAN_POINT('',(6.32,-4.06,1.539999999982)); +#71531 = CIRCLE('',#71532,0.27); +#71532 = AXIS2_PLACEMENT_3D('',#71533,#71534,#71535); +#71533 = CARTESIAN_POINT('',(6.05,-4.06,1.539999999982)); +#71534 = DIRECTION('',(0.,1.,2.2E-16)); +#71535 = DIRECTION('',(0.,2.2E-16,-1.)); +#71536 = ORIENTED_EDGE('',*,*,#71537,.F.); +#71537 = EDGE_CURVE('',#71538,#71529,#71540,.T.); +#71538 = VERTEX_POINT('',#71539); +#71539 = CARTESIAN_POINT('',(6.32,-4.06,2.199999999982)); +#71540 = LINE('',#71541,#71542); +#71541 = CARTESIAN_POINT('',(6.32,-4.06,2.469999999982)); +#71542 = VECTOR('',#71543,1.); +#71543 = DIRECTION('',(0.,2.2E-16,-1.)); +#71544 = ORIENTED_EDGE('',*,*,#71545,.F.); +#71545 = EDGE_CURVE('',#71487,#71538,#71546,.T.); +#71546 = CIRCLE('',#71547,0.27); +#71547 = AXIS2_PLACEMENT_3D('',#71548,#71549,#71550); +#71548 = CARTESIAN_POINT('',(6.05,-4.06,2.199999999982)); +#71549 = DIRECTION('',(0.,1.,2.2E-16)); +#71550 = DIRECTION('',(0.,2.2E-16,-1.)); +#71551 = FACE_BOUND('',#71552,.F.); +#71552 = EDGE_LOOP('',(#71553,#71563,#71572,#71580,#71589,#71597,#71604, + #71605)); +#71553 = ORIENTED_EDGE('',*,*,#71554,.T.); +#71554 = EDGE_CURVE('',#71555,#71557,#71559,.T.); +#71555 = VERTEX_POINT('',#71556); +#71556 = CARTESIAN_POINT('',(-0.195,-4.06,3.02)); +#71557 = VERTEX_POINT('',#71558); +#71558 = CARTESIAN_POINT('',(6.145,-4.06,3.02)); +#71559 = LINE('',#71560,#71561); +#71560 = CARTESIAN_POINT('',(-0.195,-4.06,3.02)); +#71561 = VECTOR('',#71562,1.); +#71562 = DIRECTION('',(1.,0.,0.)); +#71563 = ORIENTED_EDGE('',*,*,#71564,.T.); +#71564 = EDGE_CURVE('',#71557,#71565,#71567,.T.); +#71565 = VERTEX_POINT('',#71566); +#71566 = CARTESIAN_POINT('',(7.015,-4.06,2.15)); +#71567 = CIRCLE('',#71568,0.87); +#71568 = AXIS2_PLACEMENT_3D('',#71569,#71570,#71571); +#71569 = CARTESIAN_POINT('',(6.145,-4.06,2.15)); +#71570 = DIRECTION('',(-0.,1.,3.5E-16)); +#71571 = DIRECTION('',(0.,-3.5E-16,1.)); +#71572 = ORIENTED_EDGE('',*,*,#71573,.T.); +#71573 = EDGE_CURVE('',#71565,#71574,#71576,.T.); +#71574 = VERTEX_POINT('',#71575); +#71575 = CARTESIAN_POINT('',(7.015,-4.06,1.59)); +#71576 = LINE('',#71577,#71578); +#71577 = CARTESIAN_POINT('',(7.015,-4.06,2.15)); +#71578 = VECTOR('',#71579,1.); +#71579 = DIRECTION('',(0.,2.2E-16,-1.)); +#71580 = ORIENTED_EDGE('',*,*,#71581,.T.); +#71581 = EDGE_CURVE('',#71574,#71582,#71584,.T.); +#71582 = VERTEX_POINT('',#71583); +#71583 = CARTESIAN_POINT('',(6.145,-4.06,0.72)); +#71584 = CIRCLE('',#71585,0.87); +#71585 = AXIS2_PLACEMENT_3D('',#71586,#71587,#71588); +#71586 = CARTESIAN_POINT('',(6.145,-4.06,1.59)); +#71587 = DIRECTION('',(0.,1.,3.5E-16)); +#71588 = DIRECTION('',(1.,-7.7E-32,2.2E-16)); +#71589 = ORIENTED_EDGE('',*,*,#71590,.T.); +#71590 = EDGE_CURVE('',#71582,#71591,#71593,.T.); +#71591 = VERTEX_POINT('',#71592); +#71592 = CARTESIAN_POINT('',(-0.195,-4.06,0.72)); +#71593 = LINE('',#71594,#71595); +#71594 = CARTESIAN_POINT('',(6.145,-4.06,0.72)); +#71595 = VECTOR('',#71596,1.); +#71596 = DIRECTION('',(-1.,0.,0.)); +#71597 = ORIENTED_EDGE('',*,*,#71598,.T.); +#71598 = EDGE_CURVE('',#71591,#71454,#71599,.T.); +#71599 = CIRCLE('',#71600,0.87); +#71600 = AXIS2_PLACEMENT_3D('',#71601,#71602,#71603); +#71601 = CARTESIAN_POINT('',(-0.195,-4.06,1.59)); +#71602 = DIRECTION('',(-7.601021176044E-48,1.,3.5E-16)); +#71603 = DIRECTION('',(-4.4E-16,3.5E-16,-1.)); +#71604 = ORIENTED_EDGE('',*,*,#71470,.T.); +#71605 = ORIENTED_EDGE('',*,*,#71606,.T.); +#71606 = EDGE_CURVE('',#71463,#71555,#71607,.T.); +#71607 = CIRCLE('',#71608,0.87); +#71608 = AXIS2_PLACEMENT_3D('',#71609,#71610,#71611); +#71609 = CARTESIAN_POINT('',(-0.195,-4.06,2.15)); +#71610 = DIRECTION('',(0.,1.,3.5E-16)); +#71611 = DIRECTION('',(-1.,0.,0.)); +#71612 = PLANE('',#71613); +#71613 = AXIS2_PLACEMENT_3D('',#71614,#71615,#71616); +#71614 = CARTESIAN_POINT('',(2.975,-4.06,1.87)); +#71615 = DIRECTION('',(0.,1.,5.7E-16)); +#71616 = DIRECTION('',(0.,-5.7E-16,1.)); +#71617 = ADVANCED_FACE('',(#71618),#71641,.F.); +#71618 = FACE_BOUND('',#71619,.F.); +#71619 = EDGE_LOOP('',(#71620,#71628,#71634,#71640)); +#71620 = ORIENTED_EDGE('',*,*,#71621,.F.); +#71621 = EDGE_CURVE('',#71622,#71565,#71624,.T.); +#71622 = VERTEX_POINT('',#71623); +#71623 = CARTESIAN_POINT('',(7.145,-3.93,2.15)); +#71624 = LINE('',#71625,#71626); +#71625 = CARTESIAN_POINT('',(7.145,-3.93,2.15)); +#71626 = VECTOR('',#71627,1.); +#71627 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.899999999998E-16)); +#71628 = ORIENTED_EDGE('',*,*,#71629,.T.); +#71629 = EDGE_CURVE('',#71622,#70974,#71630,.T.); +#71630 = LINE('',#71631,#71632); +#71631 = CARTESIAN_POINT('',(7.145,-3.93,2.15)); +#71632 = VECTOR('',#71633,1.); +#71633 = DIRECTION('',(0.,2.2E-16,-1.)); +#71634 = ORIENTED_EDGE('',*,*,#71635,.T.); +#71635 = EDGE_CURVE('',#70974,#71574,#71636,.T.); +#71636 = LINE('',#71637,#71638); +#71637 = CARTESIAN_POINT('',(7.08,-3.995,1.59)); +#71638 = VECTOR('',#71639,1.); +#71639 = DIRECTION('',(-0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#71640 = ORIENTED_EDGE('',*,*,#71573,.F.); +#71641 = PLANE('',#71642); +#71642 = AXIS2_PLACEMENT_3D('',#71643,#71644,#71645); +#71643 = CARTESIAN_POINT('',(7.08,-3.995,2.15)); +#71644 = DIRECTION('',(-0.707106781187,0.707106781187,2.199999999999E-16 + )); +#71645 = DIRECTION('',(-4.056349186096E-17,2.705634918609E-16,-1.)); +#71646 = ADVANCED_FACE('',(#71647),#71666,.T.); +#71647 = FACE_BOUND('',#71648,.T.); +#71648 = EDGE_LOOP('',(#71649,#71650,#71651,#71660)); +#71649 = ORIENTED_EDGE('',*,*,#71564,.T.); +#71650 = ORIENTED_EDGE('',*,*,#71621,.F.); +#71651 = ORIENTED_EDGE('',*,*,#71652,.F.); +#71652 = EDGE_CURVE('',#71653,#71622,#71655,.T.); +#71653 = VERTEX_POINT('',#71654); +#71654 = CARTESIAN_POINT('',(6.145,-3.93,3.15)); +#71655 = CIRCLE('',#71656,1.); +#71656 = AXIS2_PLACEMENT_3D('',#71657,#71658,#71659); +#71657 = CARTESIAN_POINT('',(6.145,-3.93,2.15)); +#71658 = DIRECTION('',(-0.,1.,3.5E-16)); +#71659 = DIRECTION('',(0.,-3.5E-16,1.)); +#71660 = ORIENTED_EDGE('',*,*,#71661,.T.); +#71661 = EDGE_CURVE('',#71653,#71557,#71662,.T.); +#71662 = LINE('',#71663,#71664); +#71663 = CARTESIAN_POINT('',(6.145,-3.995,3.085)); +#71664 = VECTOR('',#71665,1.); +#71665 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#71666 = CONICAL_SURFACE('',#71667,1.,0.785398163397); +#71667 = AXIS2_PLACEMENT_3D('',#71668,#71669,#71670); +#71668 = CARTESIAN_POINT('',(6.145,-3.93,2.15)); +#71669 = DIRECTION('',(0.,1.,3.5E-16)); +#71670 = DIRECTION('',(0.,-3.5E-16,1.)); +#71671 = ADVANCED_FACE('',(#71672),#71696,.T.); +#71672 = FACE_BOUND('',#71673,.T.); +#71673 = EDGE_LOOP('',(#71674,#71675,#71681,#71690)); +#71674 = ORIENTED_EDGE('',*,*,#71652,.T.); +#71675 = ORIENTED_EDGE('',*,*,#71676,.F.); +#71676 = EDGE_CURVE('',#70925,#71622,#71677,.T.); +#71677 = LINE('',#71678,#71679); +#71678 = CARTESIAN_POINT('',(7.145,-2.26,2.15)); +#71679 = VECTOR('',#71680,1.); +#71680 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71681 = ORIENTED_EDGE('',*,*,#71682,.F.); +#71682 = EDGE_CURVE('',#71683,#70925,#71685,.T.); +#71683 = VERTEX_POINT('',#71684); +#71684 = CARTESIAN_POINT('',(6.145,-2.26,3.15)); +#71685 = CIRCLE('',#71686,1.); +#71686 = AXIS2_PLACEMENT_3D('',#71687,#71688,#71689); +#71687 = CARTESIAN_POINT('',(6.145,-2.26,2.15)); +#71688 = DIRECTION('',(0.,1.,2.2E-16)); +#71689 = DIRECTION('',(0.,2.2E-16,-1.)); +#71690 = ORIENTED_EDGE('',*,*,#71691,.T.); +#71691 = EDGE_CURVE('',#71683,#71653,#71692,.T.); +#71692 = LINE('',#71693,#71694); +#71693 = CARTESIAN_POINT('',(6.145,-2.26,3.15)); +#71694 = VECTOR('',#71695,1.); +#71695 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71696 = CYLINDRICAL_SURFACE('',#71697,1.); +#71697 = AXIS2_PLACEMENT_3D('',#71698,#71699,#71700); +#71698 = CARTESIAN_POINT('',(6.145,-2.26,2.15)); +#71699 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71700 = DIRECTION('',(0.,-2.2E-16,1.)); +#71701 = ADVANCED_FACE('',(#71702),#71727,.T.); +#71702 = FACE_BOUND('',#71703,.T.); +#71703 = EDGE_LOOP('',(#71704,#71714,#71720,#71721)); +#71704 = ORIENTED_EDGE('',*,*,#71705,.T.); +#71705 = EDGE_CURVE('',#71706,#71708,#71710,.T.); +#71706 = VERTEX_POINT('',#71707); +#71707 = CARTESIAN_POINT('',(-0.195,-2.26,3.15)); +#71708 = VERTEX_POINT('',#71709); +#71709 = CARTESIAN_POINT('',(-0.195,-3.93,3.15)); +#71710 = LINE('',#71711,#71712); +#71711 = CARTESIAN_POINT('',(-0.195,-2.26,3.15)); +#71712 = VECTOR('',#71713,1.); +#71713 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71714 = ORIENTED_EDGE('',*,*,#71715,.T.); +#71715 = EDGE_CURVE('',#71708,#71653,#71716,.T.); +#71716 = LINE('',#71717,#71718); +#71717 = CARTESIAN_POINT('',(-0.195,-3.93,3.15)); +#71718 = VECTOR('',#71719,1.); +#71719 = DIRECTION('',(1.,0.,0.)); +#71720 = ORIENTED_EDGE('',*,*,#71691,.F.); +#71721 = ORIENTED_EDGE('',*,*,#71722,.F.); +#71722 = EDGE_CURVE('',#71706,#71683,#71723,.T.); +#71723 = LINE('',#71724,#71725); +#71724 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71725 = VECTOR('',#71726,1.); +#71726 = DIRECTION('',(1.,0.,0.)); +#71727 = PLANE('',#71728); +#71728 = AXIS2_PLACEMENT_3D('',#71729,#71730,#71731); +#71729 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71730 = DIRECTION('',(0.,-2.2E-16,1.)); +#71731 = DIRECTION('',(1.,0.,0.)); +#71732 = ADVANCED_FACE('',(#71733),#71758,.T.); +#71733 = FACE_BOUND('',#71734,.T.); +#71734 = EDGE_LOOP('',(#71735,#71745,#71751,#71752)); +#71735 = ORIENTED_EDGE('',*,*,#71736,.F.); +#71736 = EDGE_CURVE('',#71737,#71739,#71741,.T.); +#71737 = VERTEX_POINT('',#71738); +#71738 = CARTESIAN_POINT('',(-0.195,-0.44,3.15)); +#71739 = VERTEX_POINT('',#71740); +#71740 = CARTESIAN_POINT('',(6.145,-0.44,3.15)); +#71741 = LINE('',#71742,#71743); +#71742 = CARTESIAN_POINT('',(-1.195000000002,-0.44,3.15)); +#71743 = VECTOR('',#71744,1.); +#71744 = DIRECTION('',(1.,0.,0.)); +#71745 = ORIENTED_EDGE('',*,*,#71746,.T.); +#71746 = EDGE_CURVE('',#71737,#71706,#71747,.T.); +#71747 = LINE('',#71748,#71749); +#71748 = CARTESIAN_POINT('',(-0.195,-0.44,3.15)); +#71749 = VECTOR('',#71750,1.); +#71750 = DIRECTION('',(0.,-1.,0.)); +#71751 = ORIENTED_EDGE('',*,*,#71722,.T.); +#71752 = ORIENTED_EDGE('',*,*,#71753,.F.); +#71753 = EDGE_CURVE('',#71739,#71683,#71754,.T.); +#71754 = LINE('',#71755,#71756); +#71755 = CARTESIAN_POINT('',(6.145,-0.44,3.15)); +#71756 = VECTOR('',#71757,1.); +#71757 = DIRECTION('',(0.,-1.,0.)); +#71758 = PLANE('',#71759); +#71759 = AXIS2_PLACEMENT_3D('',#71760,#71761,#71762); +#71760 = CARTESIAN_POINT('',(2.975,-0.85,3.15)); +#71761 = DIRECTION('',(0.,-2.2E-16,1.)); +#71762 = DIRECTION('',(1.,0.,0.)); +#71763 = ADVANCED_FACE('',(#71764),#71791,.F.); +#71764 = FACE_BOUND('',#71765,.F.); +#71765 = EDGE_LOOP('',(#71766,#71767,#71776,#71784)); +#71766 = ORIENTED_EDGE('',*,*,#71736,.F.); +#71767 = ORIENTED_EDGE('',*,*,#71768,.F.); +#71768 = EDGE_CURVE('',#71769,#71737,#71771,.T.); +#71769 = VERTEX_POINT('',#71770); +#71770 = CARTESIAN_POINT('',(-1.19179486355,-0.44,2.23)); +#71771 = CIRCLE('',#71772,1.); +#71772 = AXIS2_PLACEMENT_3D('',#71773,#71774,#71775); +#71773 = CARTESIAN_POINT('',(-0.195,-0.44,2.15)); +#71774 = DIRECTION('',(0.,1.,0.)); +#71775 = DIRECTION('',(0.,0.,-1.)); +#71776 = ORIENTED_EDGE('',*,*,#71777,.T.); +#71777 = EDGE_CURVE('',#71769,#71778,#71780,.T.); +#71778 = VERTEX_POINT('',#71779); +#71779 = CARTESIAN_POINT('',(7.14179486355,-0.44,2.23)); +#71780 = LINE('',#71781,#71782); +#71781 = CARTESIAN_POINT('',(-1.195000000002,-0.44,2.23)); +#71782 = VECTOR('',#71783,1.); +#71783 = DIRECTION('',(1.,0.,0.)); +#71784 = ORIENTED_EDGE('',*,*,#71785,.T.); +#71785 = EDGE_CURVE('',#71778,#71739,#71786,.T.); +#71786 = CIRCLE('',#71787,1.); +#71787 = AXIS2_PLACEMENT_3D('',#71788,#71789,#71790); +#71788 = CARTESIAN_POINT('',(6.145,-0.44,2.15)); +#71789 = DIRECTION('',(0.,-1.,0.)); +#71790 = DIRECTION('',(0.,0.,-1.)); +#71791 = PLANE('',#71792); +#71792 = AXIS2_PLACEMENT_3D('',#71793,#71794,#71795); +#71793 = CARTESIAN_POINT('',(-1.195000000002,-0.44,3.15)); +#71794 = DIRECTION('',(0.,-1.,0.)); +#71795 = DIRECTION('',(1.,0.,0.)); +#71796 = ADVANCED_FACE('',(#71797),#71822,.T.); +#71797 = FACE_BOUND('',#71798,.T.); +#71798 = EDGE_LOOP('',(#71799,#71809,#71815,#71816)); +#71799 = ORIENTED_EDGE('',*,*,#71800,.F.); +#71800 = EDGE_CURVE('',#71801,#71803,#71805,.T.); +#71801 = VERTEX_POINT('',#71802); +#71802 = CARTESIAN_POINT('',(-1.19179486355,0.56,2.23)); +#71803 = VERTEX_POINT('',#71804); +#71804 = CARTESIAN_POINT('',(7.14179486355,0.56,2.23)); +#71805 = LINE('',#71806,#71807); +#71806 = CARTESIAN_POINT('',(-1.195,0.56,2.23)); +#71807 = VECTOR('',#71808,1.); +#71808 = DIRECTION('',(1.,0.,0.)); +#71809 = ORIENTED_EDGE('',*,*,#71810,.T.); +#71810 = EDGE_CURVE('',#71801,#71769,#71811,.T.); +#71811 = LINE('',#71812,#71813); +#71812 = CARTESIAN_POINT('',(-1.19179486355,-0.44,2.23)); +#71813 = VECTOR('',#71814,1.); +#71814 = DIRECTION('',(0.,-1.,0.)); +#71815 = ORIENTED_EDGE('',*,*,#71777,.T.); +#71816 = ORIENTED_EDGE('',*,*,#71817,.F.); +#71817 = EDGE_CURVE('',#71803,#71778,#71818,.T.); +#71818 = LINE('',#71819,#71820); +#71819 = CARTESIAN_POINT('',(7.14179486355,-0.44,2.23)); +#71820 = VECTOR('',#71821,1.); +#71821 = DIRECTION('',(0.,-1.,0.)); +#71822 = PLANE('',#71823); +#71823 = AXIS2_PLACEMENT_3D('',#71824,#71825,#71826); +#71824 = CARTESIAN_POINT('',(2.975,5.999999999995E-02,2.23)); +#71825 = DIRECTION('',(0.,-2.2E-16,1.)); +#71826 = DIRECTION('',(1.,0.,0.)); +#71827 = ADVANCED_FACE('',(#71828),#71838,.T.); +#71828 = FACE_BOUND('',#71829,.T.); +#71829 = EDGE_LOOP('',(#71830,#71831)); +#71830 = ORIENTED_EDGE('',*,*,#71682,.T.); +#71831 = ORIENTED_EDGE('',*,*,#71832,.T.); +#71832 = EDGE_CURVE('',#70925,#71683,#71833,.T.); +#71833 = CIRCLE('',#71834,1.); +#71834 = AXIS2_PLACEMENT_3D('',#71835,#71836,#71837); +#71835 = CARTESIAN_POINT('',(6.145,-2.26,2.15)); +#71836 = DIRECTION('',(0.,-1.,0.)); +#71837 = DIRECTION('',(0.,0.,-1.)); +#71838 = PLANE('',#71839); +#71839 = AXIS2_PLACEMENT_3D('',#71840,#71841,#71842); +#71840 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#71841 = DIRECTION('',(0.,1.,0.)); +#71842 = DIRECTION('',(1.,0.,0.)); +#71843 = ADVANCED_FACE('',(#71844),#71855,.F.); +#71844 = FACE_BOUND('',#71845,.F.); +#71845 = EDGE_LOOP('',(#71846,#71852,#71853,#71854)); +#71846 = ORIENTED_EDGE('',*,*,#71847,.F.); +#71847 = EDGE_CURVE('',#71708,#71555,#71848,.T.); +#71848 = LINE('',#71849,#71850); +#71849 = CARTESIAN_POINT('',(-0.195,-3.995,3.085)); +#71850 = VECTOR('',#71851,1.); +#71851 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#71852 = ORIENTED_EDGE('',*,*,#71715,.T.); +#71853 = ORIENTED_EDGE('',*,*,#71661,.T.); +#71854 = ORIENTED_EDGE('',*,*,#71554,.F.); +#71855 = PLANE('',#71856); +#71856 = AXIS2_PLACEMENT_3D('',#71857,#71858,#71859); +#71857 = CARTESIAN_POINT('',(-0.195,-3.995,3.085)); +#71858 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); +#71859 = DIRECTION('',(1.,0.,0.)); +#71860 = ADVANCED_FACE('',(#71861),#71887,.T.); +#71861 = FACE_BOUND('',#71862,.T.); +#71862 = EDGE_LOOP('',(#71863,#71871,#71880,#71886)); +#71863 = ORIENTED_EDGE('',*,*,#71864,.T.); +#71864 = EDGE_CURVE('',#71487,#71865,#71867,.T.); +#71865 = VERTEX_POINT('',#71866); +#71866 = CARTESIAN_POINT('',(6.05,-5.38,2.469999999982)); +#71867 = LINE('',#71868,#71869); +#71868 = CARTESIAN_POINT('',(6.05,-4.06,2.469999999982)); +#71869 = VECTOR('',#71870,1.); +#71870 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71871 = ORIENTED_EDGE('',*,*,#71872,.T.); +#71872 = EDGE_CURVE('',#71865,#71873,#71875,.T.); +#71873 = VERTEX_POINT('',#71874); +#71874 = CARTESIAN_POINT('',(6.32,-5.38,2.199999999982)); +#71875 = CIRCLE('',#71876,0.27); +#71876 = AXIS2_PLACEMENT_3D('',#71877,#71878,#71879); +#71877 = CARTESIAN_POINT('',(6.05,-5.38,2.199999999982)); +#71878 = DIRECTION('',(0.,1.,2.2E-16)); +#71879 = DIRECTION('',(0.,2.2E-16,-1.)); +#71880 = ORIENTED_EDGE('',*,*,#71881,.F.); +#71881 = EDGE_CURVE('',#71538,#71873,#71882,.T.); +#71882 = LINE('',#71883,#71884); +#71883 = CARTESIAN_POINT('',(6.32,-4.06,2.199999999982)); +#71884 = VECTOR('',#71885,1.); +#71885 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71886 = ORIENTED_EDGE('',*,*,#71545,.F.); +#71887 = CYLINDRICAL_SURFACE('',#71888,0.27); +#71888 = AXIS2_PLACEMENT_3D('',#71889,#71890,#71891); +#71889 = CARTESIAN_POINT('',(6.05,-4.06,2.199999999982)); +#71890 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71891 = DIRECTION('',(0.,-2.2E-16,1.)); +#71892 = ADVANCED_FACE('',(#71893),#71967,.F.); +#71893 = FACE_BOUND('',#71894,.F.); +#71894 = EDGE_LOOP('',(#71895,#71905,#71913,#71921,#71929,#71938,#71944, + #71945,#71953,#71961)); +#71895 = ORIENTED_EDGE('',*,*,#71896,.F.); +#71896 = EDGE_CURVE('',#71897,#71899,#71901,.T.); +#71897 = VERTEX_POINT('',#71898); +#71898 = CARTESIAN_POINT('',(-0.27,-5.38,2.17)); +#71899 = VERTEX_POINT('',#71900); +#71900 = CARTESIAN_POINT('',(6.22,-5.38,2.17)); +#71901 = LINE('',#71902,#71903); +#71902 = CARTESIAN_POINT('',(-0.37,-5.38,2.17)); +#71903 = VECTOR('',#71904,1.); +#71904 = DIRECTION('',(1.,0.,0.)); +#71905 = ORIENTED_EDGE('',*,*,#71906,.F.); +#71906 = EDGE_CURVE('',#71907,#71897,#71909,.T.); +#71907 = VERTEX_POINT('',#71908); +#71908 = CARTESIAN_POINT('',(-0.37,-5.38,2.07)); +#71909 = LINE('',#71910,#71911); +#71910 = CARTESIAN_POINT('',(0.441249999993,-5.38,2.881249999993)); +#71911 = VECTOR('',#71912,1.); +#71912 = DIRECTION('',(0.707106781187,-5.199999999997E-16,0.707106781187 + )); +#71913 = ORIENTED_EDGE('',*,*,#71914,.F.); +#71914 = EDGE_CURVE('',#71915,#71907,#71917,.T.); +#71915 = VERTEX_POINT('',#71916); +#71916 = CARTESIAN_POINT('',(-0.37,-5.38,2.17)); +#71917 = LINE('',#71918,#71919); +#71918 = CARTESIAN_POINT('',(-0.37,-5.38,1.71999999999)); +#71919 = VECTOR('',#71920,1.); +#71920 = DIRECTION('',(0.,7.4E-16,-1.)); +#71921 = ORIENTED_EDGE('',*,*,#71922,.F.); +#71922 = EDGE_CURVE('',#71923,#71915,#71925,.T.); +#71923 = VERTEX_POINT('',#71924); +#71924 = CARTESIAN_POINT('',(-0.37,-5.38,2.199999999982)); +#71925 = LINE('',#71926,#71927); +#71926 = CARTESIAN_POINT('',(-0.37,-5.38,2.469999999982)); +#71927 = VECTOR('',#71928,1.); +#71928 = DIRECTION('',(0.,2.2E-16,-1.)); +#71929 = ORIENTED_EDGE('',*,*,#71930,.F.); +#71930 = EDGE_CURVE('',#71931,#71923,#71933,.T.); +#71931 = VERTEX_POINT('',#71932); +#71932 = CARTESIAN_POINT('',(-0.1,-5.38,2.469999999982)); +#71933 = CIRCLE('',#71934,0.27); +#71934 = AXIS2_PLACEMENT_3D('',#71935,#71936,#71937); +#71935 = CARTESIAN_POINT('',(-0.1,-5.38,2.199999999982)); +#71936 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71937 = DIRECTION('',(0.,2.2E-16,-1.)); +#71938 = ORIENTED_EDGE('',*,*,#71939,.T.); +#71939 = EDGE_CURVE('',#71931,#71865,#71940,.T.); +#71940 = LINE('',#71941,#71942); +#71941 = CARTESIAN_POINT('',(-0.37,-5.38,2.469999999982)); +#71942 = VECTOR('',#71943,1.); +#71943 = DIRECTION('',(1.,0.,0.)); +#71944 = ORIENTED_EDGE('',*,*,#71872,.T.); +#71945 = ORIENTED_EDGE('',*,*,#71946,.T.); +#71946 = EDGE_CURVE('',#71873,#71947,#71949,.T.); +#71947 = VERTEX_POINT('',#71948); +#71948 = CARTESIAN_POINT('',(6.32,-5.38,2.17)); +#71949 = LINE('',#71950,#71951); +#71950 = CARTESIAN_POINT('',(6.32,-5.38,2.469999999982)); +#71951 = VECTOR('',#71952,1.); +#71952 = DIRECTION('',(0.,2.2E-16,-1.)); +#71953 = ORIENTED_EDGE('',*,*,#71954,.T.); +#71954 = EDGE_CURVE('',#71947,#71955,#71957,.T.); +#71955 = VERTEX_POINT('',#71956); +#71956 = CARTESIAN_POINT('',(6.32,-5.38,2.07)); +#71957 = LINE('',#71958,#71959); +#71958 = CARTESIAN_POINT('',(6.32,-5.38,1.71999999999)); +#71959 = VECTOR('',#71960,1.); +#71960 = DIRECTION('',(0.,7.4E-16,-1.)); +#71961 = ORIENTED_EDGE('',*,*,#71962,.T.); +#71962 = EDGE_CURVE('',#71955,#71899,#71963,.T.); +#71963 = LINE('',#71964,#71965); +#71964 = CARTESIAN_POINT('',(5.508750000003,-5.38,2.881249999997)); +#71965 = VECTOR('',#71966,1.); +#71966 = DIRECTION('',(-0.707106781187,-5.199999999997E-16, + 0.707106781187)); +#71967 = PLANE('',#71968); +#71968 = AXIS2_PLACEMENT_3D('',#71969,#71970,#71971); +#71969 = CARTESIAN_POINT('',(2.974999999991,-5.38,1.86999999998)); +#71970 = DIRECTION('',(0.,1.,9.6E-16)); +#71971 = DIRECTION('',(0.,-9.6E-16,1.)); +#71972 = ADVANCED_FACE('',(#71973),#71998,.T.); +#71973 = FACE_BOUND('',#71974,.F.); +#71974 = EDGE_LOOP('',(#71975,#71976,#71984,#71992)); +#71975 = ORIENTED_EDGE('',*,*,#71962,.F.); +#71976 = ORIENTED_EDGE('',*,*,#71977,.T.); +#71977 = EDGE_CURVE('',#71955,#71978,#71980,.T.); +#71978 = VERTEX_POINT('',#71979); +#71979 = CARTESIAN_POINT('',(6.32,-5.76,2.07)); +#71980 = LINE('',#71981,#71982); +#71981 = CARTESIAN_POINT('',(6.32,-5.38,2.07)); +#71982 = VECTOR('',#71983,1.); +#71983 = DIRECTION('',(0.,-1.,0.)); +#71984 = ORIENTED_EDGE('',*,*,#71985,.T.); +#71985 = EDGE_CURVE('',#71978,#71986,#71988,.T.); +#71986 = VERTEX_POINT('',#71987); +#71987 = CARTESIAN_POINT('',(6.22,-5.76,2.17)); +#71988 = LINE('',#71989,#71990); +#71989 = CARTESIAN_POINT('',(6.3575,-5.76,2.0325)); +#71990 = VECTOR('',#71991,1.); +#71991 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#71992 = ORIENTED_EDGE('',*,*,#71993,.F.); +#71993 = EDGE_CURVE('',#71899,#71986,#71994,.T.); +#71994 = LINE('',#71995,#71996); +#71995 = CARTESIAN_POINT('',(6.22,-5.38,2.17)); +#71996 = VECTOR('',#71997,1.); +#71997 = DIRECTION('',(0.,-1.,0.)); +#71998 = PLANE('',#71999); +#71999 = AXIS2_PLACEMENT_3D('',#72000,#72001,#72002); +#72000 = CARTESIAN_POINT('',(6.27,-5.38,2.12)); +#72001 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72002 = DIRECTION('',(-0.,1.,0.)); +#72003 = ADVANCED_FACE('',(#72004),#72045,.F.); +#72004 = FACE_BOUND('',#72005,.F.); +#72005 = EDGE_LOOP('',(#72006,#72014,#72022,#72030,#72038,#72044)); +#72006 = ORIENTED_EDGE('',*,*,#72007,.F.); +#72007 = EDGE_CURVE('',#72008,#71978,#72010,.T.); +#72008 = VERTEX_POINT('',#72009); +#72009 = CARTESIAN_POINT('',(6.32,-5.76,1.67)); +#72010 = LINE('',#72011,#72012); +#72011 = CARTESIAN_POINT('',(6.32,-5.76,1.57)); +#72012 = VECTOR('',#72013,1.); +#72013 = DIRECTION('',(0.,0.,1.)); +#72014 = ORIENTED_EDGE('',*,*,#72015,.T.); +#72015 = EDGE_CURVE('',#72008,#72016,#72018,.T.); +#72016 = VERTEX_POINT('',#72017); +#72017 = CARTESIAN_POINT('',(6.22,-5.76,1.57)); +#72018 = LINE('',#72019,#72020); +#72019 = CARTESIAN_POINT('',(6.2075,-5.76,1.5575)); +#72020 = VECTOR('',#72021,1.); +#72021 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72022 = ORIENTED_EDGE('',*,*,#72023,.F.); +#72023 = EDGE_CURVE('',#72024,#72016,#72026,.T.); +#72024 = VERTEX_POINT('',#72025); +#72025 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72026 = LINE('',#72027,#72028); +#72027 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72028 = VECTOR('',#72029,1.); +#72029 = DIRECTION('',(1.,0.,0.)); +#72030 = ORIENTED_EDGE('',*,*,#72031,.T.); +#72031 = EDGE_CURVE('',#72024,#72032,#72034,.T.); +#72032 = VERTEX_POINT('',#72033); +#72033 = CARTESIAN_POINT('',(6.07,-5.76,2.17)); +#72034 = LINE('',#72035,#72036); +#72035 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72036 = VECTOR('',#72037,1.); +#72037 = DIRECTION('',(0.,0.,1.)); +#72038 = ORIENTED_EDGE('',*,*,#72039,.T.); +#72039 = EDGE_CURVE('',#72032,#71986,#72040,.T.); +#72040 = LINE('',#72041,#72042); +#72041 = CARTESIAN_POINT('',(6.07,-5.76,2.17)); +#72042 = VECTOR('',#72043,1.); +#72043 = DIRECTION('',(1.,0.,0.)); +#72044 = ORIENTED_EDGE('',*,*,#71985,.F.); +#72045 = PLANE('',#72046); +#72046 = AXIS2_PLACEMENT_3D('',#72047,#72048,#72049); +#72047 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72048 = DIRECTION('',(0.,1.,0.)); +#72049 = DIRECTION('',(1.,0.,0.)); +#72050 = ADVANCED_FACE('',(#72051),#72076,.T.); +#72051 = FACE_BOUND('',#72052,.T.); +#72052 = EDGE_LOOP('',(#72053,#72054,#72062,#72070)); +#72053 = ORIENTED_EDGE('',*,*,#72031,.T.); +#72054 = ORIENTED_EDGE('',*,*,#72055,.T.); +#72055 = EDGE_CURVE('',#72032,#72056,#72058,.T.); +#72056 = VERTEX_POINT('',#72057); +#72057 = CARTESIAN_POINT('',(6.07,-7.26,2.17)); +#72058 = LINE('',#72059,#72060); +#72059 = CARTESIAN_POINT('',(6.07,-5.76,2.17)); +#72060 = VECTOR('',#72061,1.); +#72061 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72062 = ORIENTED_EDGE('',*,*,#72063,.F.); +#72063 = EDGE_CURVE('',#72064,#72056,#72066,.T.); +#72064 = VERTEX_POINT('',#72065); +#72065 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72066 = LINE('',#72067,#72068); +#72067 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72068 = VECTOR('',#72069,1.); +#72069 = DIRECTION('',(0.,0.,1.)); +#72070 = ORIENTED_EDGE('',*,*,#72071,.F.); +#72071 = EDGE_CURVE('',#72024,#72064,#72072,.T.); +#72072 = LINE('',#72073,#72074); +#72073 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72074 = VECTOR('',#72075,1.); +#72075 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72076 = PLANE('',#72077); +#72077 = AXIS2_PLACEMENT_3D('',#72078,#72079,#72080); +#72078 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72079 = DIRECTION('',(1.,0.,0.)); +#72080 = DIRECTION('',(0.,-1.,0.)); +#72081 = ADVANCED_FACE('',(#72082),#72123,.T.); +#72082 = FACE_BOUND('',#72083,.T.); +#72083 = EDGE_LOOP('',(#72084,#72094,#72102,#72108,#72109,#72117)); +#72084 = ORIENTED_EDGE('',*,*,#72085,.F.); +#72085 = EDGE_CURVE('',#72086,#72088,#72090,.T.); +#72086 = VERTEX_POINT('',#72087); +#72087 = CARTESIAN_POINT('',(6.32,-7.26,1.67)); +#72088 = VERTEX_POINT('',#72089); +#72089 = CARTESIAN_POINT('',(6.32,-7.26,2.07)); +#72090 = LINE('',#72091,#72092); +#72091 = CARTESIAN_POINT('',(6.32,-7.26,1.57)); +#72092 = VECTOR('',#72093,1.); +#72093 = DIRECTION('',(0.,0.,1.)); +#72094 = ORIENTED_EDGE('',*,*,#72095,.F.); +#72095 = EDGE_CURVE('',#72096,#72086,#72098,.T.); +#72096 = VERTEX_POINT('',#72097); +#72097 = CARTESIAN_POINT('',(6.22,-7.26,1.57)); +#72098 = LINE('',#72099,#72100); +#72099 = CARTESIAN_POINT('',(6.2075,-7.26,1.5575)); +#72100 = VECTOR('',#72101,1.); +#72101 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72102 = ORIENTED_EDGE('',*,*,#72103,.F.); +#72103 = EDGE_CURVE('',#72064,#72096,#72104,.T.); +#72104 = LINE('',#72105,#72106); +#72105 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72106 = VECTOR('',#72107,1.); +#72107 = DIRECTION('',(1.,0.,0.)); +#72108 = ORIENTED_EDGE('',*,*,#72063,.T.); +#72109 = ORIENTED_EDGE('',*,*,#72110,.T.); +#72110 = EDGE_CURVE('',#72056,#72111,#72113,.T.); +#72111 = VERTEX_POINT('',#72112); +#72112 = CARTESIAN_POINT('',(6.22,-7.26,2.17)); +#72113 = LINE('',#72114,#72115); +#72114 = CARTESIAN_POINT('',(6.07,-7.26,2.17)); +#72115 = VECTOR('',#72116,1.); +#72116 = DIRECTION('',(1.,0.,0.)); +#72117 = ORIENTED_EDGE('',*,*,#72118,.T.); +#72118 = EDGE_CURVE('',#72111,#72088,#72119,.T.); +#72119 = LINE('',#72120,#72121); +#72120 = CARTESIAN_POINT('',(6.3575,-7.26,2.0325)); +#72121 = VECTOR('',#72122,1.); +#72122 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72123 = PLANE('',#72124); +#72124 = AXIS2_PLACEMENT_3D('',#72125,#72126,#72127); +#72125 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72126 = DIRECTION('',(0.,1.,0.)); +#72127 = DIRECTION('',(1.,0.,0.)); +#72128 = ADVANCED_FACE('',(#72129),#72154,.T.); +#72129 = FACE_BOUND('',#72130,.T.); +#72130 = EDGE_LOOP('',(#72131,#72132,#72140,#72148)); +#72131 = ORIENTED_EDGE('',*,*,#72118,.F.); +#72132 = ORIENTED_EDGE('',*,*,#72133,.T.); +#72133 = EDGE_CURVE('',#72111,#72134,#72136,.T.); +#72134 = VERTEX_POINT('',#72135); +#72135 = CARTESIAN_POINT('',(6.22,-8.06,2.17)); +#72136 = LINE('',#72137,#72138); +#72137 = CARTESIAN_POINT('',(6.22,-7.26,2.17)); +#72138 = VECTOR('',#72139,1.); +#72139 = DIRECTION('',(0.,-1.,0.)); +#72140 = ORIENTED_EDGE('',*,*,#72141,.T.); +#72141 = EDGE_CURVE('',#72134,#72142,#72144,.T.); +#72142 = VERTEX_POINT('',#72143); +#72143 = CARTESIAN_POINT('',(6.32,-7.76,2.07)); +#72144 = LINE('',#72145,#72146); +#72145 = CARTESIAN_POINT('',(6.406363636364,-7.500909090909, + 1.983636363636)); +#72146 = VECTOR('',#72147,1.); +#72147 = DIRECTION('',(0.301511344578,0.904534033733,-0.301511344578)); +#72148 = ORIENTED_EDGE('',*,*,#72149,.F.); +#72149 = EDGE_CURVE('',#72088,#72142,#72150,.T.); +#72150 = LINE('',#72151,#72152); +#72151 = CARTESIAN_POINT('',(6.32,-7.26,2.07)); +#72152 = VECTOR('',#72153,1.); +#72153 = DIRECTION('',(0.,-1.,0.)); +#72154 = PLANE('',#72155); +#72155 = AXIS2_PLACEMENT_3D('',#72156,#72157,#72158); +#72156 = CARTESIAN_POINT('',(6.27,-7.26,2.12)); +#72157 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72158 = DIRECTION('',(0.,-1.,0.)); +#72159 = ADVANCED_FACE('',(#72160),#72217,.T.); +#72160 = FACE_BOUND('',#72161,.T.); +#72161 = EDGE_LOOP('',(#72162,#72170,#72171,#72179,#72187,#72195,#72203, + #72211)); +#72162 = ORIENTED_EDGE('',*,*,#72163,.T.); +#72163 = EDGE_CURVE('',#72164,#72142,#72166,.T.); +#72164 = VERTEX_POINT('',#72165); +#72165 = CARTESIAN_POINT('',(6.32,-7.76,1.67)); +#72166 = LINE('',#72167,#72168); +#72167 = CARTESIAN_POINT('',(6.32,-7.76,1.57)); +#72168 = VECTOR('',#72169,1.); +#72169 = DIRECTION('',(0.,0.,1.)); +#72170 = ORIENTED_EDGE('',*,*,#72141,.F.); +#72171 = ORIENTED_EDGE('',*,*,#72172,.T.); +#72172 = EDGE_CURVE('',#72134,#72173,#72175,.T.); +#72173 = VERTEX_POINT('',#72174); +#72174 = CARTESIAN_POINT('',(6.103333333333,-8.41,2.17)); +#72175 = LINE('',#72176,#72177); +#72176 = CARTESIAN_POINT('',(6.32,-7.76,2.17)); +#72177 = VECTOR('',#72178,1.); +#72178 = DIRECTION('',(-0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72179 = ORIENTED_EDGE('',*,*,#72180,.T.); +#72180 = EDGE_CURVE('',#72173,#72181,#72183,.T.); +#72181 = VERTEX_POINT('',#72182); +#72182 = CARTESIAN_POINT('',(6.07,-8.51,2.07)); +#72183 = LINE('',#72184,#72185); +#72184 = CARTESIAN_POINT('',(5.941315789474,-8.896052631579, + 1.683947368421)); +#72185 = VECTOR('',#72186,1.); +#72186 = DIRECTION('',(-0.229415733871,-0.688247201612,-0.688247201612) + ); +#72187 = ORIENTED_EDGE('',*,*,#72188,.F.); +#72188 = EDGE_CURVE('',#72189,#72181,#72191,.T.); +#72189 = VERTEX_POINT('',#72190); +#72190 = CARTESIAN_POINT('',(6.07,-8.51,1.67)); +#72191 = LINE('',#72192,#72193); +#72192 = CARTESIAN_POINT('',(6.07,-8.51,1.57)); +#72193 = VECTOR('',#72194,1.); +#72194 = DIRECTION('',(0.,0.,1.)); +#72195 = ORIENTED_EDGE('',*,*,#72196,.F.); +#72196 = EDGE_CURVE('',#72197,#72189,#72199,.T.); +#72197 = VERTEX_POINT('',#72198); +#72198 = CARTESIAN_POINT('',(6.103333333333,-8.41,1.57)); +#72199 = LINE('',#72200,#72201); +#72200 = CARTESIAN_POINT('',(5.988684210526,-8.753947368421, + 1.913947368421)); +#72201 = VECTOR('',#72202,1.); +#72202 = DIRECTION('',(-0.229415733871,-0.688247201612,0.688247201612)); +#72203 = ORIENTED_EDGE('',*,*,#72204,.F.); +#72204 = EDGE_CURVE('',#72205,#72197,#72207,.T.); +#72205 = VERTEX_POINT('',#72206); +#72206 = CARTESIAN_POINT('',(6.22,-8.06,1.57)); +#72207 = LINE('',#72208,#72209); +#72208 = CARTESIAN_POINT('',(6.32,-7.76,1.57)); +#72209 = VECTOR('',#72210,1.); +#72210 = DIRECTION('',(-0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72211 = ORIENTED_EDGE('',*,*,#72212,.T.); +#72212 = EDGE_CURVE('',#72205,#72164,#72213,.T.); +#72213 = LINE('',#72214,#72215); +#72214 = CARTESIAN_POINT('',(6.379090909091,-7.582727272727, + 1.729090909091)); +#72215 = VECTOR('',#72216,1.); +#72216 = DIRECTION('',(0.301511344578,0.904534033733,0.301511344578)); +#72217 = PLANE('',#72218); +#72218 = AXIS2_PLACEMENT_3D('',#72219,#72220,#72221); +#72219 = CARTESIAN_POINT('',(6.32,-7.76,1.57)); +#72220 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#72221 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#72222 = ADVANCED_FACE('',(#72223),#72248,.T.); +#72223 = FACE_BOUND('',#72224,.T.); +#72224 = EDGE_LOOP('',(#72225,#72235,#72241,#72242)); +#72225 = ORIENTED_EDGE('',*,*,#72226,.F.); +#72226 = EDGE_CURVE('',#72227,#72229,#72231,.T.); +#72227 = VERTEX_POINT('',#72228); +#72228 = CARTESIAN_POINT('',(-0.153333333333,-8.41,1.57)); +#72229 = VERTEX_POINT('',#72230); +#72230 = CARTESIAN_POINT('',(-0.12,-8.51,1.67)); +#72231 = LINE('',#72232,#72233); +#72232 = CARTESIAN_POINT('',(-0.201578947368,-8.265263157895, + 1.425263157895)); +#72233 = VECTOR('',#72234,1.); +#72234 = DIRECTION('',(0.229415733871,-0.688247201612,0.688247201612)); +#72235 = ORIENTED_EDGE('',*,*,#72236,.T.); +#72236 = EDGE_CURVE('',#72227,#72197,#72237,.T.); +#72237 = LINE('',#72238,#72239); +#72238 = CARTESIAN_POINT('',(-0.12,-8.41,1.57)); +#72239 = VECTOR('',#72240,1.); +#72240 = DIRECTION('',(1.,0.,0.)); +#72241 = ORIENTED_EDGE('',*,*,#72196,.T.); +#72242 = ORIENTED_EDGE('',*,*,#72243,.F.); +#72243 = EDGE_CURVE('',#72229,#72189,#72244,.T.); +#72244 = LINE('',#72245,#72246); +#72245 = CARTESIAN_POINT('',(-0.12,-8.51,1.67)); +#72246 = VECTOR('',#72247,1.); +#72247 = DIRECTION('',(1.,0.,0.)); +#72248 = PLANE('',#72249); +#72249 = AXIS2_PLACEMENT_3D('',#72250,#72251,#72252); +#72250 = CARTESIAN_POINT('',(-0.12,-8.46,1.62)); +#72251 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#72252 = DIRECTION('',(1.,0.,0.)); +#72253 = ADVANCED_FACE('',(#72254),#72311,.F.); +#72254 = FACE_BOUND('',#72255,.F.); +#72255 = EDGE_LOOP('',(#72256,#72266,#72274,#72282,#72290,#72296,#72297, + #72305)); +#72256 = ORIENTED_EDGE('',*,*,#72257,.T.); +#72257 = EDGE_CURVE('',#72258,#72260,#72262,.T.); +#72258 = VERTEX_POINT('',#72259); +#72259 = CARTESIAN_POINT('',(-0.37,-7.76,1.67)); +#72260 = VERTEX_POINT('',#72261); +#72261 = CARTESIAN_POINT('',(-0.37,-7.76,2.07)); +#72262 = LINE('',#72263,#72264); +#72263 = CARTESIAN_POINT('',(-0.37,-7.76,1.57)); +#72264 = VECTOR('',#72265,1.); +#72265 = DIRECTION('',(0.,0.,1.)); +#72266 = ORIENTED_EDGE('',*,*,#72267,.F.); +#72267 = EDGE_CURVE('',#72268,#72260,#72270,.T.); +#72268 = VERTEX_POINT('',#72269); +#72269 = CARTESIAN_POINT('',(-0.27,-8.06,2.17)); +#72270 = LINE('',#72271,#72272); +#72271 = CARTESIAN_POINT('',(-0.456363636364,-7.500909090909, + 1.983636363636)); +#72272 = VECTOR('',#72273,1.); +#72273 = DIRECTION('',(-0.301511344578,0.904534033733,-0.301511344578)); +#72274 = ORIENTED_EDGE('',*,*,#72275,.T.); +#72275 = EDGE_CURVE('',#72268,#72276,#72278,.T.); +#72276 = VERTEX_POINT('',#72277); +#72277 = CARTESIAN_POINT('',(-0.153333333333,-8.41,2.17)); +#72278 = LINE('',#72279,#72280); +#72279 = CARTESIAN_POINT('',(-0.37,-7.76,2.17)); +#72280 = VECTOR('',#72281,1.); +#72281 = DIRECTION('',(0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72282 = ORIENTED_EDGE('',*,*,#72283,.T.); +#72283 = EDGE_CURVE('',#72276,#72284,#72286,.T.); +#72284 = VERTEX_POINT('',#72285); +#72285 = CARTESIAN_POINT('',(-0.12,-8.51,2.07)); +#72286 = LINE('',#72287,#72288); +#72287 = CARTESIAN_POINT('',(-0.154210526316,-8.407368421053, + 2.172631578947)); +#72288 = VECTOR('',#72289,1.); +#72289 = DIRECTION('',(0.229415733871,-0.688247201612,-0.688247201612)); +#72290 = ORIENTED_EDGE('',*,*,#72291,.F.); +#72291 = EDGE_CURVE('',#72229,#72284,#72292,.T.); +#72292 = LINE('',#72293,#72294); +#72293 = CARTESIAN_POINT('',(-0.12,-8.51,1.57)); +#72294 = VECTOR('',#72295,1.); +#72295 = DIRECTION('',(0.,0.,1.)); +#72296 = ORIENTED_EDGE('',*,*,#72226,.F.); +#72297 = ORIENTED_EDGE('',*,*,#72298,.F.); +#72298 = EDGE_CURVE('',#72299,#72227,#72301,.T.); +#72299 = VERTEX_POINT('',#72300); +#72300 = CARTESIAN_POINT('',(-0.27,-8.06,1.57)); +#72301 = LINE('',#72302,#72303); +#72302 = CARTESIAN_POINT('',(-0.37,-7.76,1.57)); +#72303 = VECTOR('',#72304,1.); +#72304 = DIRECTION('',(0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72305 = ORIENTED_EDGE('',*,*,#72306,.T.); +#72306 = EDGE_CURVE('',#72299,#72258,#72307,.T.); +#72307 = LINE('',#72308,#72309); +#72308 = CARTESIAN_POINT('',(-0.429090909091,-7.582727272727, + 1.729090909091)); +#72309 = VECTOR('',#72310,1.); +#72310 = DIRECTION('',(-0.301511344578,0.904534033733,0.301511344578)); +#72311 = PLANE('',#72312); +#72312 = AXIS2_PLACEMENT_3D('',#72313,#72314,#72315); +#72313 = CARTESIAN_POINT('',(-0.37,-7.76,1.57)); +#72314 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#72315 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#72316 = ADVANCED_FACE('',(#72317),#72342,.T.); +#72317 = FACE_BOUND('',#72318,.T.); +#72318 = EDGE_LOOP('',(#72319,#72329,#72335,#72336)); +#72319 = ORIENTED_EDGE('',*,*,#72320,.F.); +#72320 = EDGE_CURVE('',#72321,#72323,#72325,.T.); +#72321 = VERTEX_POINT('',#72322); +#72322 = CARTESIAN_POINT('',(-0.27,-7.26,1.57)); +#72323 = VERTEX_POINT('',#72324); +#72324 = CARTESIAN_POINT('',(-0.37,-7.26,1.67)); +#72325 = LINE('',#72326,#72327); +#72326 = CARTESIAN_POINT('',(-0.32,-7.26,1.62)); +#72327 = VECTOR('',#72328,1.); +#72328 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#72329 = ORIENTED_EDGE('',*,*,#72330,.T.); +#72330 = EDGE_CURVE('',#72321,#72299,#72331,.T.); +#72331 = LINE('',#72332,#72333); +#72332 = CARTESIAN_POINT('',(-0.27,-7.26,1.57)); +#72333 = VECTOR('',#72334,1.); +#72334 = DIRECTION('',(0.,-1.,0.)); +#72335 = ORIENTED_EDGE('',*,*,#72306,.T.); +#72336 = ORIENTED_EDGE('',*,*,#72337,.F.); +#72337 = EDGE_CURVE('',#72323,#72258,#72338,.T.); +#72338 = LINE('',#72339,#72340); +#72339 = CARTESIAN_POINT('',(-0.37,-7.26,1.67)); +#72340 = VECTOR('',#72341,1.); +#72341 = DIRECTION('',(0.,-1.,0.)); +#72342 = PLANE('',#72343); +#72343 = AXIS2_PLACEMENT_3D('',#72344,#72345,#72346); +#72344 = CARTESIAN_POINT('',(-0.32,-7.26,1.62)); +#72345 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72346 = DIRECTION('',(0.,-1.,-0.)); +#72347 = ADVANCED_FACE('',(#72348),#72389,.T.); +#72348 = FACE_BOUND('',#72349,.T.); +#72349 = EDGE_LOOP('',(#72350,#72358,#72366,#72374,#72382,#72388)); +#72350 = ORIENTED_EDGE('',*,*,#72351,.T.); +#72351 = EDGE_CURVE('',#72323,#72352,#72354,.T.); +#72352 = VERTEX_POINT('',#72353); +#72353 = CARTESIAN_POINT('',(-0.37,-7.26,2.07)); +#72354 = LINE('',#72355,#72356); +#72355 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72356 = VECTOR('',#72357,1.); +#72357 = DIRECTION('',(0.,0.,1.)); +#72358 = ORIENTED_EDGE('',*,*,#72359,.F.); +#72359 = EDGE_CURVE('',#72360,#72352,#72362,.T.); +#72360 = VERTEX_POINT('',#72361); +#72361 = CARTESIAN_POINT('',(-0.27,-7.26,2.17)); +#72362 = LINE('',#72363,#72364); +#72363 = CARTESIAN_POINT('',(-0.47,-7.26,1.97)); +#72364 = VECTOR('',#72365,1.); +#72365 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72366 = ORIENTED_EDGE('',*,*,#72367,.T.); +#72367 = EDGE_CURVE('',#72360,#72368,#72370,.T.); +#72368 = VERTEX_POINT('',#72369); +#72369 = CARTESIAN_POINT('',(-0.12,-7.26,2.17)); +#72370 = LINE('',#72371,#72372); +#72371 = CARTESIAN_POINT('',(-0.37,-7.26,2.17)); +#72372 = VECTOR('',#72373,1.); +#72373 = DIRECTION('',(1.,0.,0.)); +#72374 = ORIENTED_EDGE('',*,*,#72375,.F.); +#72375 = EDGE_CURVE('',#72376,#72368,#72378,.T.); +#72376 = VERTEX_POINT('',#72377); +#72377 = CARTESIAN_POINT('',(-0.12,-7.26,1.57)); +#72378 = LINE('',#72379,#72380); +#72379 = CARTESIAN_POINT('',(-0.12,-7.26,1.57)); +#72380 = VECTOR('',#72381,1.); +#72381 = DIRECTION('',(0.,0.,1.)); +#72382 = ORIENTED_EDGE('',*,*,#72383,.F.); +#72383 = EDGE_CURVE('',#72321,#72376,#72384,.T.); +#72384 = LINE('',#72385,#72386); +#72385 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72386 = VECTOR('',#72387,1.); +#72387 = DIRECTION('',(1.,0.,0.)); +#72388 = ORIENTED_EDGE('',*,*,#72320,.T.); +#72389 = PLANE('',#72390); +#72390 = AXIS2_PLACEMENT_3D('',#72391,#72392,#72393); +#72391 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72392 = DIRECTION('',(0.,1.,0.)); +#72393 = DIRECTION('',(1.,0.,0.)); +#72394 = ADVANCED_FACE('',(#72395),#72420,.F.); +#72395 = FACE_BOUND('',#72396,.F.); +#72396 = EDGE_LOOP('',(#72397,#72407,#72413,#72414)); +#72397 = ORIENTED_EDGE('',*,*,#72398,.T.); +#72398 = EDGE_CURVE('',#72399,#72401,#72403,.T.); +#72399 = VERTEX_POINT('',#72400); +#72400 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72401 = VERTEX_POINT('',#72402); +#72402 = CARTESIAN_POINT('',(-0.12,-5.76,2.17)); +#72403 = LINE('',#72404,#72405); +#72404 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72405 = VECTOR('',#72406,1.); +#72406 = DIRECTION('',(0.,0.,1.)); +#72407 = ORIENTED_EDGE('',*,*,#72408,.T.); +#72408 = EDGE_CURVE('',#72401,#72368,#72409,.T.); +#72409 = LINE('',#72410,#72411); +#72410 = CARTESIAN_POINT('',(-0.12,-5.76,2.17)); +#72411 = VECTOR('',#72412,1.); +#72412 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72413 = ORIENTED_EDGE('',*,*,#72375,.F.); +#72414 = ORIENTED_EDGE('',*,*,#72415,.F.); +#72415 = EDGE_CURVE('',#72399,#72376,#72416,.T.); +#72416 = LINE('',#72417,#72418); +#72417 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72418 = VECTOR('',#72419,1.); +#72419 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72420 = PLANE('',#72421); +#72421 = AXIS2_PLACEMENT_3D('',#72422,#72423,#72424); +#72422 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72423 = DIRECTION('',(1.,0.,0.)); +#72424 = DIRECTION('',(0.,-1.,0.)); +#72425 = ADVANCED_FACE('',(#72426),#72467,.F.); +#72426 = FACE_BOUND('',#72427,.F.); +#72427 = EDGE_LOOP('',(#72428,#72438,#72446,#72452,#72453,#72461)); +#72428 = ORIENTED_EDGE('',*,*,#72429,.T.); +#72429 = EDGE_CURVE('',#72430,#72432,#72434,.T.); +#72430 = VERTEX_POINT('',#72431); +#72431 = CARTESIAN_POINT('',(-0.37,-5.76,1.67)); +#72432 = VERTEX_POINT('',#72433); +#72433 = CARTESIAN_POINT('',(-0.37,-5.76,2.07)); +#72434 = LINE('',#72435,#72436); +#72435 = CARTESIAN_POINT('',(-0.37,-5.76,1.57)); +#72436 = VECTOR('',#72437,1.); +#72437 = DIRECTION('',(0.,0.,1.)); +#72438 = ORIENTED_EDGE('',*,*,#72439,.T.); +#72439 = EDGE_CURVE('',#72432,#72440,#72442,.T.); +#72440 = VERTEX_POINT('',#72441); +#72441 = CARTESIAN_POINT('',(-0.27,-5.76,2.17)); +#72442 = LINE('',#72443,#72444); +#72443 = CARTESIAN_POINT('',(-0.47,-5.76,1.97)); +#72444 = VECTOR('',#72445,1.); +#72445 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72446 = ORIENTED_EDGE('',*,*,#72447,.T.); +#72447 = EDGE_CURVE('',#72440,#72401,#72448,.T.); +#72448 = LINE('',#72449,#72450); +#72449 = CARTESIAN_POINT('',(-0.37,-5.76,2.17)); +#72450 = VECTOR('',#72451,1.); +#72451 = DIRECTION('',(1.,0.,0.)); +#72452 = ORIENTED_EDGE('',*,*,#72398,.F.); +#72453 = ORIENTED_EDGE('',*,*,#72454,.F.); +#72454 = EDGE_CURVE('',#72455,#72399,#72457,.T.); +#72455 = VERTEX_POINT('',#72456); +#72456 = CARTESIAN_POINT('',(-0.27,-5.76,1.57)); +#72457 = LINE('',#72458,#72459); +#72458 = CARTESIAN_POINT('',(-0.37,-5.76,1.57)); +#72459 = VECTOR('',#72460,1.); +#72460 = DIRECTION('',(1.,0.,0.)); +#72461 = ORIENTED_EDGE('',*,*,#72462,.F.); +#72462 = EDGE_CURVE('',#72430,#72455,#72463,.T.); +#72463 = LINE('',#72464,#72465); +#72464 = CARTESIAN_POINT('',(-0.32,-5.76,1.62)); +#72465 = VECTOR('',#72466,1.); +#72466 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72467 = PLANE('',#72468); +#72468 = AXIS2_PLACEMENT_3D('',#72469,#72470,#72471); +#72469 = CARTESIAN_POINT('',(-0.37,-5.76,1.57)); +#72470 = DIRECTION('',(0.,1.,0.)); +#72471 = DIRECTION('',(1.,0.,0.)); +#72472 = ADVANCED_FACE('',(#72473),#72498,.T.); +#72473 = FACE_BOUND('',#72474,.F.); +#72474 = EDGE_LOOP('',(#72475,#72485,#72491,#72492)); +#72475 = ORIENTED_EDGE('',*,*,#72476,.F.); +#72476 = EDGE_CURVE('',#72477,#72479,#72481,.T.); +#72477 = VERTEX_POINT('',#72478); +#72478 = CARTESIAN_POINT('',(-0.37,-5.38,1.67)); +#72479 = VERTEX_POINT('',#72480); +#72480 = CARTESIAN_POINT('',(-0.27,-5.38,1.57)); +#72481 = LINE('',#72482,#72483); +#72482 = CARTESIAN_POINT('',(0.441250000003,-5.38,0.858749999997)); +#72483 = VECTOR('',#72484,1.); +#72484 = DIRECTION('',(0.707106781187,5.199999999997E-16,-0.707106781187 + )); +#72485 = ORIENTED_EDGE('',*,*,#72486,.T.); +#72486 = EDGE_CURVE('',#72477,#72430,#72487,.T.); +#72487 = LINE('',#72488,#72489); +#72488 = CARTESIAN_POINT('',(-0.37,-5.38,1.67)); +#72489 = VECTOR('',#72490,1.); +#72490 = DIRECTION('',(0.,-1.,0.)); +#72491 = ORIENTED_EDGE('',*,*,#72462,.T.); +#72492 = ORIENTED_EDGE('',*,*,#72493,.F.); +#72493 = EDGE_CURVE('',#72479,#72455,#72494,.T.); +#72494 = LINE('',#72495,#72496); +#72495 = CARTESIAN_POINT('',(-0.27,-5.38,1.57)); +#72496 = VECTOR('',#72497,1.); +#72497 = DIRECTION('',(0.,-1.,0.)); +#72498 = PLANE('',#72499); +#72499 = AXIS2_PLACEMENT_3D('',#72500,#72501,#72502); +#72500 = CARTESIAN_POINT('',(-0.32,-5.38,1.62)); +#72501 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72502 = DIRECTION('',(0.,1.,0.)); +#72503 = ADVANCED_FACE('',(#72504),#72579,.F.); +#72504 = FACE_BOUND('',#72505,.F.); +#72505 = EDGE_LOOP('',(#72506,#72514,#72522,#72530,#72538,#72547,#72555, + #72564,#72572,#72578)); +#72506 = ORIENTED_EDGE('',*,*,#72507,.T.); +#72507 = EDGE_CURVE('',#72479,#72508,#72510,.T.); +#72508 = VERTEX_POINT('',#72509); +#72509 = CARTESIAN_POINT('',(6.22,-5.38,1.57)); +#72510 = LINE('',#72511,#72512); +#72511 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72512 = VECTOR('',#72513,1.); +#72513 = DIRECTION('',(1.,0.,0.)); +#72514 = ORIENTED_EDGE('',*,*,#72515,.F.); +#72515 = EDGE_CURVE('',#72516,#72508,#72518,.T.); +#72516 = VERTEX_POINT('',#72517); +#72517 = CARTESIAN_POINT('',(6.32,-5.38,1.67)); +#72518 = LINE('',#72519,#72520); +#72519 = CARTESIAN_POINT('',(5.508749999993,-5.38,0.858749999993)); +#72520 = VECTOR('',#72521,1.); +#72521 = DIRECTION('',(-0.707106781187,5.199999999997E-16, + -0.707106781187)); +#72522 = ORIENTED_EDGE('',*,*,#72523,.F.); +#72523 = EDGE_CURVE('',#72524,#72516,#72526,.T.); +#72524 = VERTEX_POINT('',#72525); +#72525 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72526 = LINE('',#72527,#72528); +#72527 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72528 = VECTOR('',#72529,1.); +#72529 = DIRECTION('',(0.,0.,1.)); +#72530 = ORIENTED_EDGE('',*,*,#72531,.T.); +#72531 = EDGE_CURVE('',#72524,#72532,#72534,.T.); +#72532 = VERTEX_POINT('',#72533); +#72533 = CARTESIAN_POINT('',(6.32,-5.38,1.539999999982)); +#72534 = LINE('',#72535,#72536); +#72535 = CARTESIAN_POINT('',(6.32,-5.38,2.469999999982)); +#72536 = VECTOR('',#72537,1.); +#72537 = DIRECTION('',(0.,2.2E-16,-1.)); +#72538 = ORIENTED_EDGE('',*,*,#72539,.T.); +#72539 = EDGE_CURVE('',#72532,#72540,#72542,.T.); +#72540 = VERTEX_POINT('',#72541); +#72541 = CARTESIAN_POINT('',(6.05,-5.38,1.269999999982)); +#72542 = CIRCLE('',#72543,0.27); +#72543 = AXIS2_PLACEMENT_3D('',#72544,#72545,#72546); +#72544 = CARTESIAN_POINT('',(6.05,-5.38,1.539999999982)); +#72545 = DIRECTION('',(0.,1.,2.2E-16)); +#72546 = DIRECTION('',(0.,2.2E-16,-1.)); +#72547 = ORIENTED_EDGE('',*,*,#72548,.F.); +#72548 = EDGE_CURVE('',#72549,#72540,#72551,.T.); +#72549 = VERTEX_POINT('',#72550); +#72550 = CARTESIAN_POINT('',(-0.1,-5.38,1.269999999982)); +#72551 = LINE('',#72552,#72553); +#72552 = CARTESIAN_POINT('',(-0.370000000078,-5.38,1.269999999982)); +#72553 = VECTOR('',#72554,1.); +#72554 = DIRECTION('',(1.,0.,0.)); +#72555 = ORIENTED_EDGE('',*,*,#72556,.T.); +#72556 = EDGE_CURVE('',#72549,#72557,#72559,.T.); +#72557 = VERTEX_POINT('',#72558); +#72558 = CARTESIAN_POINT('',(-0.37,-5.38,1.539999999982)); +#72559 = CIRCLE('',#72560,0.27); +#72560 = AXIS2_PLACEMENT_3D('',#72561,#72562,#72563); +#72561 = CARTESIAN_POINT('',(-0.1,-5.38,1.539999999982)); +#72562 = DIRECTION('',(0.,1.,2.2E-16)); +#72563 = DIRECTION('',(0.,2.2E-16,-1.)); +#72564 = ORIENTED_EDGE('',*,*,#72565,.F.); +#72565 = EDGE_CURVE('',#72566,#72557,#72568,.T.); +#72566 = VERTEX_POINT('',#72567); +#72567 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72568 = LINE('',#72569,#72570); +#72569 = CARTESIAN_POINT('',(-0.37,-5.38,2.469999999982)); +#72570 = VECTOR('',#72571,1.); +#72571 = DIRECTION('',(0.,2.2E-16,-1.)); +#72572 = ORIENTED_EDGE('',*,*,#72573,.T.); +#72573 = EDGE_CURVE('',#72566,#72477,#72574,.T.); +#72574 = LINE('',#72575,#72576); +#72575 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72576 = VECTOR('',#72577,1.); +#72577 = DIRECTION('',(0.,0.,1.)); +#72578 = ORIENTED_EDGE('',*,*,#72476,.T.); +#72579 = PLANE('',#72580); +#72580 = AXIS2_PLACEMENT_3D('',#72581,#72582,#72583); +#72581 = CARTESIAN_POINT('',(2.974999999991,-5.38,1.86999999998)); +#72582 = DIRECTION('',(0.,1.,9.6E-16)); +#72583 = DIRECTION('',(0.,-9.6E-16,1.)); +#72584 = ADVANCED_FACE('',(#72585),#72601,.F.); +#72585 = FACE_BOUND('',#72586,.F.); +#72586 = EDGE_LOOP('',(#72587,#72588,#72589,#72595)); +#72587 = ORIENTED_EDGE('',*,*,#72429,.F.); +#72588 = ORIENTED_EDGE('',*,*,#72486,.F.); +#72589 = ORIENTED_EDGE('',*,*,#72590,.T.); +#72590 = EDGE_CURVE('',#72477,#71907,#72591,.T.); +#72591 = LINE('',#72592,#72593); +#72592 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72593 = VECTOR('',#72594,1.); +#72594 = DIRECTION('',(0.,0.,1.)); +#72595 = ORIENTED_EDGE('',*,*,#72596,.T.); +#72596 = EDGE_CURVE('',#71907,#72432,#72597,.T.); +#72597 = LINE('',#72598,#72599); +#72598 = CARTESIAN_POINT('',(-0.37,-5.38,2.07)); +#72599 = VECTOR('',#72600,1.); +#72600 = DIRECTION('',(0.,-1.,0.)); +#72601 = PLANE('',#72602); +#72602 = AXIS2_PLACEMENT_3D('',#72603,#72604,#72605); +#72603 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72604 = DIRECTION('',(1.,0.,0.)); +#72605 = DIRECTION('',(0.,-1.,0.)); +#72606 = ADVANCED_FACE('',(#72607),#72623,.F.); +#72607 = FACE_BOUND('',#72608,.F.); +#72608 = EDGE_LOOP('',(#72609,#72610,#72616,#72617)); +#72609 = ORIENTED_EDGE('',*,*,#72359,.F.); +#72610 = ORIENTED_EDGE('',*,*,#72611,.T.); +#72611 = EDGE_CURVE('',#72360,#72268,#72612,.T.); +#72612 = LINE('',#72613,#72614); +#72613 = CARTESIAN_POINT('',(-0.27,-7.26,2.17)); +#72614 = VECTOR('',#72615,1.); +#72615 = DIRECTION('',(0.,-1.,0.)); +#72616 = ORIENTED_EDGE('',*,*,#72267,.T.); +#72617 = ORIENTED_EDGE('',*,*,#72618,.F.); +#72618 = EDGE_CURVE('',#72352,#72260,#72619,.T.); +#72619 = LINE('',#72620,#72621); +#72620 = CARTESIAN_POINT('',(-0.37,-7.26,2.07)); +#72621 = VECTOR('',#72622,1.); +#72622 = DIRECTION('',(0.,-1.,0.)); +#72623 = PLANE('',#72624); +#72624 = AXIS2_PLACEMENT_3D('',#72625,#72626,#72627); +#72625 = CARTESIAN_POINT('',(-0.32,-7.26,2.12)); +#72626 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72627 = DIRECTION('',(0.,-1.,0.)); +#72628 = ADVANCED_FACE('',(#72629),#72635,.F.); +#72629 = FACE_BOUND('',#72630,.F.); +#72630 = EDGE_LOOP('',(#72631,#72632,#72633,#72634)); +#72631 = ORIENTED_EDGE('',*,*,#72351,.T.); +#72632 = ORIENTED_EDGE('',*,*,#72618,.T.); +#72633 = ORIENTED_EDGE('',*,*,#72257,.F.); +#72634 = ORIENTED_EDGE('',*,*,#72337,.F.); +#72635 = PLANE('',#72636); +#72636 = AXIS2_PLACEMENT_3D('',#72637,#72638,#72639); +#72637 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72638 = DIRECTION('',(1.,0.,0.)); +#72639 = DIRECTION('',(0.,-1.,0.)); +#72640 = ADVANCED_FACE('',(#72641),#72652,.F.); +#72641 = FACE_BOUND('',#72642,.F.); +#72642 = EDGE_LOOP('',(#72643,#72644,#72650,#72651)); +#72643 = ORIENTED_EDGE('',*,*,#72291,.T.); +#72644 = ORIENTED_EDGE('',*,*,#72645,.T.); +#72645 = EDGE_CURVE('',#72284,#72181,#72646,.T.); +#72646 = LINE('',#72647,#72648); +#72647 = CARTESIAN_POINT('',(-0.12,-8.51,2.07)); +#72648 = VECTOR('',#72649,1.); +#72649 = DIRECTION('',(1.,0.,0.)); +#72650 = ORIENTED_EDGE('',*,*,#72188,.F.); +#72651 = ORIENTED_EDGE('',*,*,#72243,.F.); +#72652 = PLANE('',#72653); +#72653 = AXIS2_PLACEMENT_3D('',#72654,#72655,#72656); +#72654 = CARTESIAN_POINT('',(-0.12,-8.51,1.57)); +#72655 = DIRECTION('',(0.,1.,0.)); +#72656 = DIRECTION('',(1.,0.,0.)); +#72657 = ADVANCED_FACE('',(#72658),#72669,.F.); +#72658 = FACE_BOUND('',#72659,.F.); +#72659 = EDGE_LOOP('',(#72660,#72661,#72667,#72668)); +#72660 = ORIENTED_EDGE('',*,*,#72283,.F.); +#72661 = ORIENTED_EDGE('',*,*,#72662,.T.); +#72662 = EDGE_CURVE('',#72276,#72173,#72663,.T.); +#72663 = LINE('',#72664,#72665); +#72664 = CARTESIAN_POINT('',(-0.12,-8.41,2.17)); +#72665 = VECTOR('',#72666,1.); +#72666 = DIRECTION('',(1.,0.,0.)); +#72667 = ORIENTED_EDGE('',*,*,#72180,.T.); +#72668 = ORIENTED_EDGE('',*,*,#72645,.F.); +#72669 = PLANE('',#72670); +#72670 = AXIS2_PLACEMENT_3D('',#72671,#72672,#72673); +#72671 = CARTESIAN_POINT('',(-0.12,-8.46,2.12)); +#72672 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); +#72673 = DIRECTION('',(1.,0.,0.)); +#72674 = ADVANCED_FACE('',(#72675),#72691,.F.); +#72675 = FACE_BOUND('',#72676,.F.); +#72676 = EDGE_LOOP('',(#72677,#72678,#72684,#72685)); +#72677 = ORIENTED_EDGE('',*,*,#72095,.F.); +#72678 = ORIENTED_EDGE('',*,*,#72679,.T.); +#72679 = EDGE_CURVE('',#72096,#72205,#72680,.T.); +#72680 = LINE('',#72681,#72682); +#72681 = CARTESIAN_POINT('',(6.22,-7.26,1.57)); +#72682 = VECTOR('',#72683,1.); +#72683 = DIRECTION('',(0.,-1.,0.)); +#72684 = ORIENTED_EDGE('',*,*,#72212,.T.); +#72685 = ORIENTED_EDGE('',*,*,#72686,.F.); +#72686 = EDGE_CURVE('',#72086,#72164,#72687,.T.); +#72687 = LINE('',#72688,#72689); +#72688 = CARTESIAN_POINT('',(6.32,-7.26,1.67)); +#72689 = VECTOR('',#72690,1.); +#72690 = DIRECTION('',(0.,-1.,0.)); +#72691 = PLANE('',#72692); +#72692 = AXIS2_PLACEMENT_3D('',#72693,#72694,#72695); +#72693 = CARTESIAN_POINT('',(6.27,-7.26,1.62)); +#72694 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#72695 = DIRECTION('',(0.,-1.,0.)); +#72696 = ADVANCED_FACE('',(#72697),#72703,.T.); +#72697 = FACE_BOUND('',#72698,.T.); +#72698 = EDGE_LOOP('',(#72699,#72700,#72701,#72702)); +#72699 = ORIENTED_EDGE('',*,*,#72085,.T.); +#72700 = ORIENTED_EDGE('',*,*,#72149,.T.); +#72701 = ORIENTED_EDGE('',*,*,#72163,.F.); +#72702 = ORIENTED_EDGE('',*,*,#72686,.F.); +#72703 = PLANE('',#72704); +#72704 = AXIS2_PLACEMENT_3D('',#72705,#72706,#72707); +#72705 = CARTESIAN_POINT('',(6.32,-7.26,1.57)); +#72706 = DIRECTION('',(1.,0.,0.)); +#72707 = DIRECTION('',(0.,-1.,0.)); +#72708 = ADVANCED_FACE('',(#72709),#72730,.F.); +#72709 = FACE_BOUND('',#72710,.F.); +#72710 = EDGE_LOOP('',(#72711,#72712,#72713,#72714,#72715,#72716,#72717, + #72718,#72719,#72720,#72721,#72722,#72728,#72729)); +#72711 = ORIENTED_EDGE('',*,*,#72454,.T.); +#72712 = ORIENTED_EDGE('',*,*,#72415,.T.); +#72713 = ORIENTED_EDGE('',*,*,#72383,.F.); +#72714 = ORIENTED_EDGE('',*,*,#72330,.T.); +#72715 = ORIENTED_EDGE('',*,*,#72298,.T.); +#72716 = ORIENTED_EDGE('',*,*,#72236,.T.); +#72717 = ORIENTED_EDGE('',*,*,#72204,.F.); +#72718 = ORIENTED_EDGE('',*,*,#72679,.F.); +#72719 = ORIENTED_EDGE('',*,*,#72103,.F.); +#72720 = ORIENTED_EDGE('',*,*,#72071,.F.); +#72721 = ORIENTED_EDGE('',*,*,#72023,.T.); +#72722 = ORIENTED_EDGE('',*,*,#72723,.F.); +#72723 = EDGE_CURVE('',#72508,#72016,#72724,.T.); +#72724 = LINE('',#72725,#72726); +#72725 = CARTESIAN_POINT('',(6.22,-5.38,1.57)); +#72726 = VECTOR('',#72727,1.); +#72727 = DIRECTION('',(0.,-1.,0.)); +#72728 = ORIENTED_EDGE('',*,*,#72507,.F.); +#72729 = ORIENTED_EDGE('',*,*,#72493,.T.); +#72730 = PLANE('',#72731); +#72731 = AXIS2_PLACEMENT_3D('',#72732,#72733,#72734); +#72732 = CARTESIAN_POINT('',(2.975,-6.889565694266,1.57)); +#72733 = DIRECTION('',(0.,-2.2E-16,1.)); +#72734 = DIRECTION('',(1.,0.,0.)); +#72735 = ADVANCED_FACE('',(#72736),#72747,.F.); +#72736 = FACE_BOUND('',#72737,.T.); +#72737 = EDGE_LOOP('',(#72738,#72739,#72745,#72746)); +#72738 = ORIENTED_EDGE('',*,*,#72515,.F.); +#72739 = ORIENTED_EDGE('',*,*,#72740,.T.); +#72740 = EDGE_CURVE('',#72516,#72008,#72741,.T.); +#72741 = LINE('',#72742,#72743); +#72742 = CARTESIAN_POINT('',(6.32,-5.38,1.67)); +#72743 = VECTOR('',#72744,1.); +#72744 = DIRECTION('',(0.,-1.,0.)); +#72745 = ORIENTED_EDGE('',*,*,#72015,.T.); +#72746 = ORIENTED_EDGE('',*,*,#72723,.F.); +#72747 = PLANE('',#72748); +#72748 = AXIS2_PLACEMENT_3D('',#72749,#72750,#72751); +#72749 = CARTESIAN_POINT('',(6.27,-5.38,1.62)); +#72750 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#72751 = DIRECTION('',(0.,1.,0.)); +#72752 = ADVANCED_FACE('',(#72753),#72764,.T.); +#72753 = FACE_BOUND('',#72754,.T.); +#72754 = EDGE_LOOP('',(#72755,#72756,#72757,#72763)); +#72755 = ORIENTED_EDGE('',*,*,#72007,.F.); +#72756 = ORIENTED_EDGE('',*,*,#72740,.F.); +#72757 = ORIENTED_EDGE('',*,*,#72758,.T.); +#72758 = EDGE_CURVE('',#72516,#71955,#72759,.T.); +#72759 = LINE('',#72760,#72761); +#72760 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72761 = VECTOR('',#72762,1.); +#72762 = DIRECTION('',(0.,0.,1.)); +#72763 = ORIENTED_EDGE('',*,*,#71977,.T.); +#72764 = PLANE('',#72765); +#72765 = AXIS2_PLACEMENT_3D('',#72766,#72767,#72768); +#72766 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72767 = DIRECTION('',(1.,0.,0.)); +#72768 = DIRECTION('',(0.,-1.,0.)); +#72769 = ADVANCED_FACE('',(#72770),#72781,.F.); +#72770 = FACE_BOUND('',#72771,.T.); +#72771 = EDGE_LOOP('',(#72772,#72773,#72774,#72775)); +#72772 = ORIENTED_EDGE('',*,*,#71906,.F.); +#72773 = ORIENTED_EDGE('',*,*,#72596,.T.); +#72774 = ORIENTED_EDGE('',*,*,#72439,.T.); +#72775 = ORIENTED_EDGE('',*,*,#72776,.F.); +#72776 = EDGE_CURVE('',#71897,#72440,#72777,.T.); +#72777 = LINE('',#72778,#72779); +#72778 = CARTESIAN_POINT('',(-0.27,-5.38,2.17)); +#72779 = VECTOR('',#72780,1.); +#72780 = DIRECTION('',(0.,-1.,0.)); +#72781 = PLANE('',#72782); +#72782 = AXIS2_PLACEMENT_3D('',#72783,#72784,#72785); +#72783 = CARTESIAN_POINT('',(-0.32,-5.38,2.12)); +#72784 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72785 = DIRECTION('',(0.,1.,0.)); +#72786 = ADVANCED_FACE('',(#72787),#72803,.T.); +#72787 = FACE_BOUND('',#72788,.T.); +#72788 = EDGE_LOOP('',(#72789,#72790,#72791,#72792,#72793,#72794,#72795, + #72796,#72797,#72798,#72799,#72800,#72801,#72802)); +#72789 = ORIENTED_EDGE('',*,*,#72447,.T.); +#72790 = ORIENTED_EDGE('',*,*,#72408,.T.); +#72791 = ORIENTED_EDGE('',*,*,#72367,.F.); +#72792 = ORIENTED_EDGE('',*,*,#72611,.T.); +#72793 = ORIENTED_EDGE('',*,*,#72275,.T.); +#72794 = ORIENTED_EDGE('',*,*,#72662,.T.); +#72795 = ORIENTED_EDGE('',*,*,#72172,.F.); +#72796 = ORIENTED_EDGE('',*,*,#72133,.F.); +#72797 = ORIENTED_EDGE('',*,*,#72110,.F.); +#72798 = ORIENTED_EDGE('',*,*,#72055,.F.); +#72799 = ORIENTED_EDGE('',*,*,#72039,.T.); +#72800 = ORIENTED_EDGE('',*,*,#71993,.F.); +#72801 = ORIENTED_EDGE('',*,*,#71896,.F.); +#72802 = ORIENTED_EDGE('',*,*,#72776,.T.); +#72803 = PLANE('',#72804); +#72804 = AXIS2_PLACEMENT_3D('',#72805,#72806,#72807); +#72805 = CARTESIAN_POINT('',(2.975,-6.889565694266,2.17)); +#72806 = DIRECTION('',(0.,-2.2E-16,1.)); +#72807 = DIRECTION('',(1.,0.,0.)); +#72808 = ADVANCED_FACE('',(#72809),#72824,.T.); +#72809 = FACE_BOUND('',#72810,.T.); +#72810 = EDGE_LOOP('',(#72811,#72812,#72813,#72814,#72815,#72816,#72817, + #72818)); +#72811 = ORIENTED_EDGE('',*,*,#71537,.F.); +#72812 = ORIENTED_EDGE('',*,*,#71881,.T.); +#72813 = ORIENTED_EDGE('',*,*,#71946,.T.); +#72814 = ORIENTED_EDGE('',*,*,#71954,.T.); +#72815 = ORIENTED_EDGE('',*,*,#72758,.F.); +#72816 = ORIENTED_EDGE('',*,*,#72523,.F.); +#72817 = ORIENTED_EDGE('',*,*,#72531,.T.); +#72818 = ORIENTED_EDGE('',*,*,#72819,.F.); +#72819 = EDGE_CURVE('',#71529,#72532,#72820,.T.); +#72820 = LINE('',#72821,#72822); +#72821 = CARTESIAN_POINT('',(6.32,-4.06,1.539999999982)); +#72822 = VECTOR('',#72823,1.); +#72823 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72824 = PLANE('',#72825); +#72825 = AXIS2_PLACEMENT_3D('',#72826,#72827,#72828); +#72826 = CARTESIAN_POINT('',(6.32,-4.06,2.469999999982)); +#72827 = DIRECTION('',(1.,0.,0.)); +#72828 = DIRECTION('',(0.,2.2E-16,-1.)); +#72829 = ADVANCED_FACE('',(#72830),#72841,.T.); +#72830 = FACE_BOUND('',#72831,.T.); +#72831 = EDGE_LOOP('',(#72832,#72833,#72834,#72840)); +#72832 = ORIENTED_EDGE('',*,*,#72819,.T.); +#72833 = ORIENTED_EDGE('',*,*,#72539,.T.); +#72834 = ORIENTED_EDGE('',*,*,#72835,.F.); +#72835 = EDGE_CURVE('',#71521,#72540,#72836,.T.); +#72836 = LINE('',#72837,#72838); +#72837 = CARTESIAN_POINT('',(6.05,-4.06,1.269999999982)); +#72838 = VECTOR('',#72839,1.); +#72839 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72840 = ORIENTED_EDGE('',*,*,#71528,.F.); +#72841 = CYLINDRICAL_SURFACE('',#72842,0.27); +#72842 = AXIS2_PLACEMENT_3D('',#72843,#72844,#72845); +#72843 = CARTESIAN_POINT('',(6.05,-4.06,1.539999999982)); +#72844 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72845 = DIRECTION('',(1.,0.,0.)); +#72846 = ADVANCED_FACE('',(#72847),#72858,.F.); +#72847 = FACE_BOUND('',#72848,.F.); +#72848 = EDGE_LOOP('',(#72849,#72850,#72856,#72857)); +#72849 = ORIENTED_EDGE('',*,*,#71520,.F.); +#72850 = ORIENTED_EDGE('',*,*,#72851,.T.); +#72851 = EDGE_CURVE('',#71512,#72549,#72852,.T.); +#72852 = LINE('',#72853,#72854); +#72853 = CARTESIAN_POINT('',(-0.1,-4.06,1.269999999982)); +#72854 = VECTOR('',#72855,1.); +#72855 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72856 = ORIENTED_EDGE('',*,*,#72548,.T.); +#72857 = ORIENTED_EDGE('',*,*,#72835,.F.); +#72858 = PLANE('',#72859); +#72859 = AXIS2_PLACEMENT_3D('',#72860,#72861,#72862); +#72860 = CARTESIAN_POINT('',(-0.370000000078,-4.06,1.269999999982)); +#72861 = DIRECTION('',(0.,-2.2E-16,1.)); +#72862 = DIRECTION('',(1.,0.,0.)); +#72863 = ADVANCED_FACE('',(#72864),#72875,.T.); +#72864 = FACE_BOUND('',#72865,.T.); +#72865 = EDGE_LOOP('',(#72866,#72867,#72868,#72874)); +#72866 = ORIENTED_EDGE('',*,*,#72851,.T.); +#72867 = ORIENTED_EDGE('',*,*,#72556,.T.); +#72868 = ORIENTED_EDGE('',*,*,#72869,.F.); +#72869 = EDGE_CURVE('',#71504,#72557,#72870,.T.); +#72870 = LINE('',#72871,#72872); +#72871 = CARTESIAN_POINT('',(-0.37,-4.06,1.539999999982)); +#72872 = VECTOR('',#72873,1.); +#72873 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72874 = ORIENTED_EDGE('',*,*,#71511,.F.); +#72875 = CYLINDRICAL_SURFACE('',#72876,0.27); +#72876 = AXIS2_PLACEMENT_3D('',#72877,#72878,#72879); +#72877 = CARTESIAN_POINT('',(-0.1,-4.06,1.539999999982)); +#72878 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72879 = DIRECTION('',(0.,2.2E-16,-1.)); +#72880 = ADVANCED_FACE('',(#72881),#72896,.F.); +#72881 = FACE_BOUND('',#72882,.F.); +#72882 = EDGE_LOOP('',(#72883,#72884,#72890,#72891,#72892,#72893,#72894, + #72895)); +#72883 = ORIENTED_EDGE('',*,*,#71503,.F.); +#72884 = ORIENTED_EDGE('',*,*,#72885,.T.); +#72885 = EDGE_CURVE('',#71495,#71923,#72886,.T.); +#72886 = LINE('',#72887,#72888); +#72887 = CARTESIAN_POINT('',(-0.37,-4.06,2.199999999982)); +#72888 = VECTOR('',#72889,1.); +#72889 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72890 = ORIENTED_EDGE('',*,*,#71922,.T.); +#72891 = ORIENTED_EDGE('',*,*,#71914,.T.); +#72892 = ORIENTED_EDGE('',*,*,#72590,.F.); +#72893 = ORIENTED_EDGE('',*,*,#72573,.F.); +#72894 = ORIENTED_EDGE('',*,*,#72565,.T.); +#72895 = ORIENTED_EDGE('',*,*,#72869,.F.); +#72896 = PLANE('',#72897); +#72897 = AXIS2_PLACEMENT_3D('',#72898,#72899,#72900); +#72898 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#72899 = DIRECTION('',(1.,0.,0.)); +#72900 = DIRECTION('',(0.,2.2E-16,-1.)); +#72901 = ADVANCED_FACE('',(#72902),#72913,.T.); +#72902 = FACE_BOUND('',#72903,.T.); +#72903 = EDGE_LOOP('',(#72904,#72905,#72906,#72907)); +#72904 = ORIENTED_EDGE('',*,*,#71494,.T.); +#72905 = ORIENTED_EDGE('',*,*,#72885,.T.); +#72906 = ORIENTED_EDGE('',*,*,#71930,.F.); +#72907 = ORIENTED_EDGE('',*,*,#72908,.F.); +#72908 = EDGE_CURVE('',#71485,#71931,#72909,.T.); +#72909 = LINE('',#72910,#72911); +#72910 = CARTESIAN_POINT('',(-0.1,-4.06,2.469999999982)); +#72911 = VECTOR('',#72912,1.); +#72912 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72913 = CYLINDRICAL_SURFACE('',#72914,0.27); +#72914 = AXIS2_PLACEMENT_3D('',#72915,#72916,#72917); +#72915 = CARTESIAN_POINT('',(-0.1,-4.06,2.199999999982)); +#72916 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72917 = DIRECTION('',(0.,-2.2E-16,1.)); +#72918 = ADVANCED_FACE('',(#72919),#72925,.T.); +#72919 = FACE_BOUND('',#72920,.T.); +#72920 = EDGE_LOOP('',(#72921,#72922,#72923,#72924)); +#72921 = ORIENTED_EDGE('',*,*,#71484,.F.); +#72922 = ORIENTED_EDGE('',*,*,#72908,.T.); +#72923 = ORIENTED_EDGE('',*,*,#71939,.T.); +#72924 = ORIENTED_EDGE('',*,*,#71864,.F.); +#72925 = PLANE('',#72926); +#72926 = AXIS2_PLACEMENT_3D('',#72927,#72928,#72929); +#72927 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#72928 = DIRECTION('',(0.,-2.2E-16,1.)); +#72929 = DIRECTION('',(1.,0.,0.)); +#72930 = ADVANCED_FACE('',(#72931),#72943,.T.); +#72931 = FACE_BOUND('',#72932,.T.); +#72932 = EDGE_LOOP('',(#72933,#72934,#72935,#72942)); +#72933 = ORIENTED_EDGE('',*,*,#71606,.T.); +#72934 = ORIENTED_EDGE('',*,*,#71847,.F.); +#72935 = ORIENTED_EDGE('',*,*,#72936,.F.); +#72936 = EDGE_CURVE('',#71423,#71708,#72937,.T.); +#72937 = CIRCLE('',#72938,1.); +#72938 = AXIS2_PLACEMENT_3D('',#72939,#72940,#72941); +#72939 = CARTESIAN_POINT('',(-0.195,-3.93,2.15)); +#72940 = DIRECTION('',(0.,1.,3.5E-16)); +#72941 = DIRECTION('',(-1.,0.,0.)); +#72942 = ORIENTED_EDGE('',*,*,#71462,.T.); +#72943 = CONICAL_SURFACE('',#72944,1.,0.785398163397); +#72944 = AXIS2_PLACEMENT_3D('',#72945,#72946,#72947); +#72945 = CARTESIAN_POINT('',(-0.195,-3.93,2.15)); +#72946 = DIRECTION('',(0.,1.,3.5E-16)); +#72947 = DIRECTION('',(-1.,0.,0.)); +#72948 = ADVANCED_FACE('',(#72949),#72966,.T.); +#72949 = FACE_BOUND('',#72950,.T.); +#72950 = EDGE_LOOP('',(#72951,#72952,#72953,#72960)); +#72951 = ORIENTED_EDGE('',*,*,#71598,.T.); +#72952 = ORIENTED_EDGE('',*,*,#71453,.F.); +#72953 = ORIENTED_EDGE('',*,*,#72954,.F.); +#72954 = EDGE_CURVE('',#71007,#71431,#72955,.T.); +#72955 = CIRCLE('',#72956,1.); +#72956 = AXIS2_PLACEMENT_3D('',#72957,#72958,#72959); +#72957 = CARTESIAN_POINT('',(-0.195,-3.93,1.59)); +#72958 = DIRECTION('',(-7.601021176044E-48,1.,3.5E-16)); +#72959 = DIRECTION('',(-4.4E-16,3.5E-16,-1.)); +#72960 = ORIENTED_EDGE('',*,*,#72961,.T.); +#72961 = EDGE_CURVE('',#71007,#71591,#72962,.T.); +#72962 = LINE('',#72963,#72964); +#72963 = CARTESIAN_POINT('',(-0.195,-3.995,0.655)); +#72964 = VECTOR('',#72965,1.); +#72965 = DIRECTION('',(0.,-0.707106781187,0.707106781187)); +#72966 = CONICAL_SURFACE('',#72967,1.,0.785398163397); +#72967 = AXIS2_PLACEMENT_3D('',#72968,#72969,#72970); +#72968 = CARTESIAN_POINT('',(-0.195,-3.93,1.59)); +#72969 = DIRECTION('',(0.,1.,3.5E-16)); +#72970 = DIRECTION('',(-4.4E-16,3.5E-16,-1.)); +#72971 = ADVANCED_FACE('',(#72972),#72984,.T.); +#72972 = FACE_BOUND('',#72973,.T.); +#72973 = EDGE_LOOP('',(#72974,#72975,#72982,#72983)); +#72974 = ORIENTED_EDGE('',*,*,#71705,.F.); +#72975 = ORIENTED_EDGE('',*,*,#72976,.T.); +#72976 = EDGE_CURVE('',#71706,#71393,#72977,.T.); +#72977 = CIRCLE('',#72978,1.); +#72978 = AXIS2_PLACEMENT_3D('',#72979,#72980,#72981); +#72979 = CARTESIAN_POINT('',(-0.195,-2.26,2.15)); +#72980 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72981 = DIRECTION('',(0.,2.2E-16,-1.)); +#72982 = ORIENTED_EDGE('',*,*,#71422,.T.); +#72983 = ORIENTED_EDGE('',*,*,#72936,.T.); +#72984 = CYLINDRICAL_SURFACE('',#72985,1.); +#72985 = AXIS2_PLACEMENT_3D('',#72986,#72987,#72988); +#72986 = CARTESIAN_POINT('',(-0.195,-2.26,2.15)); +#72987 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72988 = DIRECTION('',(0.,-2.2E-16,1.)); +#72989 = ADVANCED_FACE('',(#72990),#73000,.F.); +#72990 = FACE_BOUND('',#72991,.F.); +#72991 = EDGE_LOOP('',(#72992,#72999)); +#72992 = ORIENTED_EDGE('',*,*,#72993,.T.); +#72993 = EDGE_CURVE('',#71393,#71706,#72994,.T.); +#72994 = CIRCLE('',#72995,1.); +#72995 = AXIS2_PLACEMENT_3D('',#72996,#72997,#72998); +#72996 = CARTESIAN_POINT('',(-0.195,-2.26,2.15)); +#72997 = DIRECTION('',(0.,1.,0.)); +#72998 = DIRECTION('',(0.,0.,-1.)); +#72999 = ORIENTED_EDGE('',*,*,#72976,.T.); +#73000 = PLANE('',#73001); +#73001 = AXIS2_PLACEMENT_3D('',#73002,#73003,#73004); +#73002 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73003 = DIRECTION('',(0.,1.,0.)); +#73004 = DIRECTION('',(1.,0.,0.)); +#73005 = ADVANCED_FACE('',(#73006),#73020,.T.); +#73006 = FACE_BOUND('',#73007,.T.); +#73007 = EDGE_LOOP('',(#73008,#73009,#73010,#73011,#73012,#73013)); +#73008 = ORIENTED_EDGE('',*,*,#71392,.T.); +#73009 = ORIENTED_EDGE('',*,*,#72993,.T.); +#73010 = ORIENTED_EDGE('',*,*,#71746,.F.); +#73011 = ORIENTED_EDGE('',*,*,#71768,.F.); +#73012 = ORIENTED_EDGE('',*,*,#71810,.F.); +#73013 = ORIENTED_EDGE('',*,*,#73014,.F.); +#73014 = EDGE_CURVE('',#71385,#71801,#73015,.T.); +#73015 = CIRCLE('',#73016,1.); +#73016 = AXIS2_PLACEMENT_3D('',#73017,#73018,#73019); +#73017 = CARTESIAN_POINT('',(-0.195,0.56,2.15)); +#73018 = DIRECTION('',(0.,1.,0.)); +#73019 = DIRECTION('',(0.,0.,-1.)); +#73020 = CYLINDRICAL_SURFACE('',#73021,1.); +#73021 = AXIS2_PLACEMENT_3D('',#73022,#73023,#73024); +#73022 = CARTESIAN_POINT('',(-0.195,-0.44,2.15)); +#73023 = DIRECTION('',(0.,-1.,0.)); +#73024 = DIRECTION('',(-1.,0.,0.)); +#73025 = ADVANCED_FACE('',(#73026),#73051,.T.); +#73026 = FACE_BOUND('',#73027,.F.); +#73027 = EDGE_LOOP('',(#73028,#73036,#73037,#73045)); +#73028 = ORIENTED_EDGE('',*,*,#73029,.T.); +#73029 = EDGE_CURVE('',#73030,#71377,#73032,.T.); +#73030 = VERTEX_POINT('',#73031); +#73031 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73032 = LINE('',#73033,#73034); +#73033 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73034 = VECTOR('',#73035,1.); +#73035 = DIRECTION('',(1.,0.,0.)); +#73036 = ORIENTED_EDGE('',*,*,#71376,.T.); +#73037 = ORIENTED_EDGE('',*,*,#73038,.T.); +#73038 = EDGE_CURVE('',#71369,#73039,#73041,.T.); +#73039 = VERTEX_POINT('',#73040); +#73040 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73041 = LINE('',#73042,#73043); +#73042 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#73043 = VECTOR('',#73044,1.); +#73044 = DIRECTION('',(-1.,0.,0.)); +#73045 = ORIENTED_EDGE('',*,*,#73046,.T.); +#73046 = EDGE_CURVE('',#73039,#73030,#73047,.T.); +#73047 = LINE('',#73048,#73049); +#73048 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73049 = VECTOR('',#73050,1.); +#73050 = DIRECTION('',(0.,1.,2.2E-16)); +#73051 = PLANE('',#73052); +#73052 = AXIS2_PLACEMENT_3D('',#73053,#73054,#73055); +#73053 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.87)); +#73054 = DIRECTION('',(0.,-2.2E-16,1.)); +#73055 = DIRECTION('',(1.,0.,0.)); +#73056 = ADVANCED_FACE('',(#73057),#73082,.F.); +#73057 = FACE_BOUND('',#73058,.F.); +#73058 = EDGE_LOOP('',(#73059,#73067,#73075,#73081)); +#73059 = ORIENTED_EDGE('',*,*,#73060,.T.); +#73060 = EDGE_CURVE('',#73039,#73061,#73063,.T.); +#73061 = VERTEX_POINT('',#73062); +#73062 = CARTESIAN_POINT('',(-1.495,-0.63,1.285)); +#73063 = LINE('',#73064,#73065); +#73064 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73065 = VECTOR('',#73066,1.); +#73066 = DIRECTION('',(0.,0.,-1.)); +#73067 = ORIENTED_EDGE('',*,*,#73068,.T.); +#73068 = EDGE_CURVE('',#73061,#73069,#73071,.T.); +#73069 = VERTEX_POINT('',#73070); +#73070 = CARTESIAN_POINT('',(-1.495,0.56,1.285)); +#73071 = LINE('',#73072,#73073); +#73072 = CARTESIAN_POINT('',(-1.495,-0.63,1.285)); +#73073 = VECTOR('',#73074,1.); +#73074 = DIRECTION('',(0.,1.,2.2E-16)); +#73075 = ORIENTED_EDGE('',*,*,#73076,.F.); +#73076 = EDGE_CURVE('',#73030,#73069,#73077,.T.); +#73077 = LINE('',#73078,#73079); +#73078 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73079 = VECTOR('',#73080,1.); +#73080 = DIRECTION('',(0.,0.,-1.)); +#73081 = ORIENTED_EDGE('',*,*,#73046,.F.); +#73082 = PLANE('',#73083); +#73083 = AXIS2_PLACEMENT_3D('',#73084,#73085,#73086); +#73084 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73085 = DIRECTION('',(1.,0.,0.)); +#73086 = DIRECTION('',(-0.,1.,0.)); +#73087 = ADVANCED_FACE('',(#73088),#73106,.F.); +#73088 = FACE_BOUND('',#73089,.F.); +#73089 = EDGE_LOOP('',(#73090,#73091,#73099,#73105)); +#73090 = ORIENTED_EDGE('',*,*,#73076,.T.); +#73091 = ORIENTED_EDGE('',*,*,#73092,.T.); +#73092 = EDGE_CURVE('',#73069,#73093,#73095,.T.); +#73093 = VERTEX_POINT('',#73094); +#73094 = CARTESIAN_POINT('',(-1.195,0.56,1.285)); +#73095 = LINE('',#73096,#73097); +#73096 = CARTESIAN_POINT('',(-1.495,0.56,1.285)); +#73097 = VECTOR('',#73098,1.); +#73098 = DIRECTION('',(1.,0.,0.)); +#73099 = ORIENTED_EDGE('',*,*,#73100,.T.); +#73100 = EDGE_CURVE('',#73093,#71377,#73101,.T.); +#73101 = LINE('',#73102,#73103); +#73102 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#73103 = VECTOR('',#73104,1.); +#73104 = DIRECTION('',(0.,0.,1.)); +#73105 = ORIENTED_EDGE('',*,*,#73029,.F.); +#73106 = PLANE('',#73107); +#73107 = AXIS2_PLACEMENT_3D('',#73108,#73109,#73110); +#73108 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73109 = DIRECTION('',(0.,-1.,0.)); +#73110 = DIRECTION('',(1.,0.,0.)); +#73111 = ADVANCED_FACE('',(#73112),#73123,.F.); +#73112 = FACE_BOUND('',#73113,.F.); +#73113 = EDGE_LOOP('',(#73114,#73115,#73121,#73122)); +#73114 = ORIENTED_EDGE('',*,*,#71368,.T.); +#73115 = ORIENTED_EDGE('',*,*,#73116,.T.); +#73116 = EDGE_CURVE('',#71361,#73061,#73117,.T.); +#73117 = LINE('',#73118,#73119); +#73118 = CARTESIAN_POINT('',(-1.195,-0.63,1.285)); +#73119 = VECTOR('',#73120,1.); +#73120 = DIRECTION('',(-1.,0.,0.)); +#73121 = ORIENTED_EDGE('',*,*,#73060,.F.); +#73122 = ORIENTED_EDGE('',*,*,#73038,.F.); +#73123 = PLANE('',#73124); +#73124 = AXIS2_PLACEMENT_3D('',#73125,#73126,#73127); +#73125 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#73126 = DIRECTION('',(0.,1.,0.)); +#73127 = DIRECTION('',(-1.,0.,0.)); +#73128 = ADVANCED_FACE('',(#73129),#73141,.F.); +#73129 = FACE_BOUND('',#73130,.T.); +#73130 = EDGE_LOOP('',(#73131,#73132,#73138,#73139,#73140)); +#73131 = ORIENTED_EDGE('',*,*,#73092,.T.); +#73132 = ORIENTED_EDGE('',*,*,#73133,.T.); +#73133 = EDGE_CURVE('',#73093,#71353,#73134,.T.); +#73134 = LINE('',#73135,#73136); +#73135 = CARTESIAN_POINT('',(-1.195,0.56,1.285)); +#73136 = VECTOR('',#73137,1.); +#73137 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73138 = ORIENTED_EDGE('',*,*,#71360,.T.); +#73139 = ORIENTED_EDGE('',*,*,#73116,.T.); +#73140 = ORIENTED_EDGE('',*,*,#73068,.T.); +#73141 = PLANE('',#73142); +#73142 = AXIS2_PLACEMENT_3D('',#73143,#73144,#73145); +#73143 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.285)); +#73144 = DIRECTION('',(0.,-2.2E-16,1.)); +#73145 = DIRECTION('',(1.,0.,0.)); +#73146 = ADVANCED_FACE('',(#73147),#73188,.F.); +#73147 = FACE_BOUND('',#73148,.F.); +#73148 = EDGE_LOOP('',(#73149,#73157,#73158,#73166,#73174,#73182)); +#73149 = ORIENTED_EDGE('',*,*,#73150,.T.); +#73150 = EDGE_CURVE('',#73151,#73093,#73153,.T.); +#73151 = VERTEX_POINT('',#73152); +#73152 = CARTESIAN_POINT('',(-0.195,0.56,1.285)); +#73153 = LINE('',#73154,#73155); +#73154 = CARTESIAN_POINT('',(-0.195,0.56,1.285)); +#73155 = VECTOR('',#73156,1.); +#73156 = DIRECTION('',(-1.,0.,0.)); +#73157 = ORIENTED_EDGE('',*,*,#73133,.T.); +#73158 = ORIENTED_EDGE('',*,*,#73159,.F.); +#73159 = EDGE_CURVE('',#73160,#71353,#73162,.T.); +#73160 = VERTEX_POINT('',#73161); +#73161 = CARTESIAN_POINT('',(-0.995,0.1,1.285)); +#73162 = LINE('',#73163,#73164); +#73163 = CARTESIAN_POINT('',(-0.995,0.1,1.285)); +#73164 = VECTOR('',#73165,1.); +#73165 = DIRECTION('',(-0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#73166 = ORIENTED_EDGE('',*,*,#73167,.F.); +#73167 = EDGE_CURVE('',#73168,#73160,#73170,.T.); +#73168 = VERTEX_POINT('',#73169); +#73169 = CARTESIAN_POINT('',(-0.295,0.1,1.285)); +#73170 = LINE('',#73171,#73172); +#73171 = CARTESIAN_POINT('',(-0.295,0.1,1.285)); +#73172 = VECTOR('',#73173,1.); +#73173 = DIRECTION('',(-1.,0.,0.)); +#73174 = ORIENTED_EDGE('',*,*,#73175,.F.); +#73175 = EDGE_CURVE('',#73176,#73168,#73178,.T.); +#73176 = VERTEX_POINT('',#73177); +#73177 = CARTESIAN_POINT('',(-0.195,0.2,1.285)); +#73178 = LINE('',#73179,#73180); +#73179 = CARTESIAN_POINT('',(-0.195,0.2,1.285)); +#73180 = VECTOR('',#73181,1.); +#73181 = DIRECTION('',(-0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#73182 = ORIENTED_EDGE('',*,*,#73183,.F.); +#73183 = EDGE_CURVE('',#73151,#73176,#73184,.T.); +#73184 = LINE('',#73185,#73186); +#73185 = CARTESIAN_POINT('',(-0.195,0.56,1.285)); +#73186 = VECTOR('',#73187,1.); +#73187 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73188 = PLANE('',#73189); +#73189 = AXIS2_PLACEMENT_3D('',#73190,#73191,#73192); +#73190 = CARTESIAN_POINT('',(-0.747316685586,0.29889766982,1.285)); +#73191 = DIRECTION('',(0.,-2.2E-16,1.)); +#73192 = DIRECTION('',(1.,0.,0.)); +#73193 = ADVANCED_FACE('',(#73194),#73219,.T.); +#73194 = FACE_BOUND('',#73195,.F.); +#73195 = EDGE_LOOP('',(#73196,#73206,#73212,#73213)); +#73196 = ORIENTED_EDGE('',*,*,#73197,.T.); +#73197 = EDGE_CURVE('',#73198,#73200,#73202,.T.); +#73198 = VERTEX_POINT('',#73199); +#73199 = CARTESIAN_POINT('',(-0.195,0.2,0.19)); +#73200 = VERTEX_POINT('',#73201); +#73201 = CARTESIAN_POINT('',(-0.195,0.56,0.19)); +#73202 = LINE('',#73203,#73204); +#73203 = CARTESIAN_POINT('',(-0.195,-0.145,0.19)); +#73204 = VECTOR('',#73205,1.); +#73205 = DIRECTION('',(0.,1.,0.)); +#73206 = ORIENTED_EDGE('',*,*,#73207,.T.); +#73207 = EDGE_CURVE('',#73200,#73151,#73208,.T.); +#73208 = LINE('',#73209,#73210); +#73209 = CARTESIAN_POINT('',(-0.195,0.56,-1.E-02)); +#73210 = VECTOR('',#73211,1.); +#73211 = DIRECTION('',(0.,0.,1.)); +#73212 = ORIENTED_EDGE('',*,*,#73183,.T.); +#73213 = ORIENTED_EDGE('',*,*,#73214,.F.); +#73214 = EDGE_CURVE('',#73198,#73176,#73215,.T.); +#73215 = LINE('',#73216,#73217); +#73216 = CARTESIAN_POINT('',(-0.195,0.2,-1.E-02)); +#73217 = VECTOR('',#73218,1.); +#73218 = DIRECTION('',(0.,0.,1.)); +#73219 = PLANE('',#73220); +#73220 = AXIS2_PLACEMENT_3D('',#73221,#73222,#73223); +#73221 = CARTESIAN_POINT('',(-0.195,0.56,-1.E-02)); +#73222 = DIRECTION('',(-1.,0.,0.)); +#73223 = DIRECTION('',(0.,1.,0.)); +#73224 = ADVANCED_FACE('',(#73225),#73243,.T.); +#73225 = FACE_BOUND('',#73226,.F.); +#73226 = EDGE_LOOP('',(#73227,#73235,#73236,#73237)); +#73227 = ORIENTED_EDGE('',*,*,#73228,.T.); +#73228 = EDGE_CURVE('',#73229,#73198,#73231,.T.); +#73229 = VERTEX_POINT('',#73230); +#73230 = CARTESIAN_POINT('',(-0.295,0.1,0.19)); +#73231 = LINE('',#73232,#73233); +#73232 = CARTESIAN_POINT('',(0.335,0.73,0.19)); +#73233 = VECTOR('',#73234,1.); +#73234 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73235 = ORIENTED_EDGE('',*,*,#73214,.T.); +#73236 = ORIENTED_EDGE('',*,*,#73175,.T.); +#73237 = ORIENTED_EDGE('',*,*,#73238,.F.); +#73238 = EDGE_CURVE('',#73229,#73168,#73239,.T.); +#73239 = LINE('',#73240,#73241); +#73240 = CARTESIAN_POINT('',(-0.295,0.1,-1.E-02)); +#73241 = VECTOR('',#73242,1.); +#73242 = DIRECTION('',(0.,0.,1.)); +#73243 = PLANE('',#73244); +#73244 = AXIS2_PLACEMENT_3D('',#73245,#73246,#73247); +#73245 = CARTESIAN_POINT('',(-0.195,0.2,-1.E-02)); +#73246 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#73247 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73248 = ADVANCED_FACE('',(#73249),#73267,.T.); +#73249 = FACE_BOUND('',#73250,.F.); +#73250 = EDGE_LOOP('',(#73251,#73259,#73260,#73261)); +#73251 = ORIENTED_EDGE('',*,*,#73252,.T.); +#73252 = EDGE_CURVE('',#73253,#73229,#73255,.T.); +#73253 = VERTEX_POINT('',#73254); +#73254 = CARTESIAN_POINT('',(-0.995,0.1,0.19)); +#73255 = LINE('',#73256,#73257); +#73256 = CARTESIAN_POINT('',(1.34,0.1,0.19)); +#73257 = VECTOR('',#73258,1.); +#73258 = DIRECTION('',(1.,0.,0.)); +#73259 = ORIENTED_EDGE('',*,*,#73238,.T.); +#73260 = ORIENTED_EDGE('',*,*,#73167,.T.); +#73261 = ORIENTED_EDGE('',*,*,#73262,.F.); +#73262 = EDGE_CURVE('',#73253,#73160,#73263,.T.); +#73263 = LINE('',#73264,#73265); +#73264 = CARTESIAN_POINT('',(-0.995,0.1,-1.E-02)); +#73265 = VECTOR('',#73266,1.); +#73266 = DIRECTION('',(0.,0.,1.)); +#73267 = PLANE('',#73268); +#73268 = AXIS2_PLACEMENT_3D('',#73269,#73270,#73271); +#73269 = CARTESIAN_POINT('',(-0.295,0.1,-1.E-02)); +#73270 = DIRECTION('',(0.,1.,0.)); +#73271 = DIRECTION('',(1.,0.,0.)); +#73272 = ADVANCED_FACE('',(#73273),#73284,.T.); +#73273 = FACE_BOUND('',#73274,.F.); +#73274 = EDGE_LOOP('',(#73275,#73281,#73282,#73283)); +#73275 = ORIENTED_EDGE('',*,*,#73276,.T.); +#73276 = EDGE_CURVE('',#71345,#73253,#73277,.T.); +#73277 = LINE('',#73278,#73279); +#73278 = CARTESIAN_POINT('',(-0.24,0.855,0.19)); +#73279 = VECTOR('',#73280,1.); +#73280 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73281 = ORIENTED_EDGE('',*,*,#73262,.T.); +#73282 = ORIENTED_EDGE('',*,*,#73159,.T.); +#73283 = ORIENTED_EDGE('',*,*,#71352,.F.); +#73284 = PLANE('',#73285); +#73285 = AXIS2_PLACEMENT_3D('',#73286,#73287,#73288); +#73286 = CARTESIAN_POINT('',(-0.995,0.1,-1.E-02)); +#73287 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#73288 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73289 = ADVANCED_FACE('',(#73290),#73296,.T.); +#73290 = FACE_BOUND('',#73291,.T.); +#73291 = EDGE_LOOP('',(#73292,#73293,#73294,#73295)); +#73292 = ORIENTED_EDGE('',*,*,#71125,.F.); +#73293 = ORIENTED_EDGE('',*,*,#71205,.T.); +#73294 = ORIENTED_EDGE('',*,*,#71226,.T.); +#73295 = ORIENTED_EDGE('',*,*,#71265,.F.); +#73296 = PLANE('',#73297); +#73297 = AXIS2_PLACEMENT_3D('',#73298,#73299,#73300); +#73298 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#73299 = DIRECTION('',(0.,1.,0.)); +#73300 = DIRECTION('',(1.,0.,0.)); +#73301 = ADVANCED_FACE('',(#73302),#73320,.F.); +#73302 = FACE_BOUND('',#73303,.F.); +#73303 = EDGE_LOOP('',(#73304,#73312,#73313,#73314)); +#73304 = ORIENTED_EDGE('',*,*,#73305,.F.); +#73305 = EDGE_CURVE('',#71258,#73306,#73308,.T.); +#73306 = VERTEX_POINT('',#73307); +#73307 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73308 = LINE('',#73309,#73310); +#73309 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73310 = VECTOR('',#73311,1.); +#73311 = DIRECTION('',(1.,0.,0.)); +#73312 = ORIENTED_EDGE('',*,*,#71257,.T.); +#73313 = ORIENTED_EDGE('',*,*,#71117,.T.); +#73314 = ORIENTED_EDGE('',*,*,#73315,.F.); +#73315 = EDGE_CURVE('',#73306,#71110,#73316,.T.); +#73316 = LINE('',#73317,#73318); +#73317 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73318 = VECTOR('',#73319,1.); +#73319 = DIRECTION('',(0.,0.,1.)); +#73320 = PLANE('',#73321); +#73321 = AXIS2_PLACEMENT_3D('',#73322,#73323,#73324); +#73322 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73323 = DIRECTION('',(0.,1.,0.)); +#73324 = DIRECTION('',(1.,0.,0.)); +#73325 = ADVANCED_FACE('',(#73326),#73359,.T.); +#73326 = FACE_BOUND('',#73327,.T.); +#73327 = EDGE_LOOP('',(#73328,#73338,#73346,#73352,#73353)); +#73328 = ORIENTED_EDGE('',*,*,#73329,.T.); +#73329 = EDGE_CURVE('',#73330,#73332,#73334,.T.); +#73330 = VERTEX_POINT('',#73331); +#73331 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73332 = VERTEX_POINT('',#73333); +#73333 = CARTESIAN_POINT('',(0.7,-1.96,1.59)); +#73334 = LINE('',#73335,#73336); +#73335 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73336 = VECTOR('',#73337,1.); +#73337 = DIRECTION('',(0.,0.,1.)); +#73338 = ORIENTED_EDGE('',*,*,#73339,.T.); +#73339 = EDGE_CURVE('',#73332,#73340,#73342,.T.); +#73340 = VERTEX_POINT('',#73341); +#73341 = CARTESIAN_POINT('',(0.7,-2.26,1.59)); +#73342 = LINE('',#73343,#73344); +#73343 = CARTESIAN_POINT('',(0.7,-1.96,1.59)); +#73344 = VECTOR('',#73345,1.); +#73345 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73346 = ORIENTED_EDGE('',*,*,#73347,.F.); +#73347 = EDGE_CURVE('',#71110,#73340,#73348,.T.); +#73348 = LINE('',#73349,#73350); +#73349 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73350 = VECTOR('',#73351,1.); +#73351 = DIRECTION('',(0.,0.,1.)); +#73352 = ORIENTED_EDGE('',*,*,#73315,.F.); +#73353 = ORIENTED_EDGE('',*,*,#73354,.F.); +#73354 = EDGE_CURVE('',#73330,#73306,#73355,.T.); +#73355 = LINE('',#73356,#73357); +#73356 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73357 = VECTOR('',#73358,1.); +#73358 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73359 = PLANE('',#73360); +#73360 = AXIS2_PLACEMENT_3D('',#73361,#73362,#73363); +#73361 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73362 = DIRECTION('',(1.,0.,0.)); +#73363 = DIRECTION('',(0.,-1.,0.)); +#73364 = ADVANCED_FACE('',(#73365),#73390,.F.); +#73365 = FACE_BOUND('',#73366,.F.); +#73366 = EDGE_LOOP('',(#73367,#73375,#73383,#73389)); +#73367 = ORIENTED_EDGE('',*,*,#73368,.T.); +#73368 = EDGE_CURVE('',#73340,#73369,#73371,.T.); +#73369 = VERTEX_POINT('',#73370); +#73370 = CARTESIAN_POINT('',(1.,-2.26,1.59)); +#73371 = LINE('',#73372,#73373); +#73372 = CARTESIAN_POINT('',(0.7,-2.26,1.59)); +#73373 = VECTOR('',#73374,1.); +#73374 = DIRECTION('',(1.,0.,0.)); +#73375 = ORIENTED_EDGE('',*,*,#73376,.T.); +#73376 = EDGE_CURVE('',#73369,#73377,#73379,.T.); +#73377 = VERTEX_POINT('',#73378); +#73378 = CARTESIAN_POINT('',(1.,-1.96,1.59)); +#73379 = LINE('',#73380,#73381); +#73380 = CARTESIAN_POINT('',(1.,-2.26,1.59)); +#73381 = VECTOR('',#73382,1.); +#73382 = DIRECTION('',(0.,1.,2.2E-16)); +#73383 = ORIENTED_EDGE('',*,*,#73384,.T.); +#73384 = EDGE_CURVE('',#73377,#73332,#73385,.T.); +#73385 = LINE('',#73386,#73387); +#73386 = CARTESIAN_POINT('',(1.,-1.96,1.59)); +#73387 = VECTOR('',#73388,1.); +#73388 = DIRECTION('',(-1.,0.,0.)); +#73389 = ORIENTED_EDGE('',*,*,#73339,.T.); +#73390 = PLANE('',#73391); +#73391 = AXIS2_PLACEMENT_3D('',#73392,#73393,#73394); +#73392 = CARTESIAN_POINT('',(0.85,-2.11,1.59)); +#73393 = DIRECTION('',(0.,-2.2E-16,1.)); +#73394 = DIRECTION('',(1.,0.,0.)); +#73395 = ADVANCED_FACE('',(#73396),#73427,.T.); +#73396 = FACE_BOUND('',#73397,.T.); +#73397 = EDGE_LOOP('',(#73398,#73406,#73412,#73413,#73421)); +#73398 = ORIENTED_EDGE('',*,*,#73399,.T.); +#73399 = EDGE_CURVE('',#73400,#71102,#73402,.T.); +#73400 = VERTEX_POINT('',#73401); +#73401 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73402 = LINE('',#73403,#73404); +#73403 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73404 = VECTOR('',#73405,1.); +#73405 = DIRECTION('',(0.,0.,1.)); +#73406 = ORIENTED_EDGE('',*,*,#73407,.T.); +#73407 = EDGE_CURVE('',#71102,#73369,#73408,.T.); +#73408 = LINE('',#73409,#73410); +#73409 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73410 = VECTOR('',#73411,1.); +#73411 = DIRECTION('',(0.,0.,1.)); +#73412 = ORIENTED_EDGE('',*,*,#73376,.T.); +#73413 = ORIENTED_EDGE('',*,*,#73414,.F.); +#73414 = EDGE_CURVE('',#73415,#73377,#73417,.T.); +#73415 = VERTEX_POINT('',#73416); +#73416 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73417 = LINE('',#73418,#73419); +#73418 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73419 = VECTOR('',#73420,1.); +#73420 = DIRECTION('',(0.,0.,1.)); +#73421 = ORIENTED_EDGE('',*,*,#73422,.F.); +#73422 = EDGE_CURVE('',#73400,#73415,#73423,.T.); +#73423 = LINE('',#73424,#73425); +#73424 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73425 = VECTOR('',#73426,1.); +#73426 = DIRECTION('',(0.,1.,2.2E-16)); +#73427 = PLANE('',#73428); +#73428 = AXIS2_PLACEMENT_3D('',#73429,#73430,#73431); +#73429 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73430 = DIRECTION('',(-1.,0.,0.)); +#73431 = DIRECTION('',(0.,1.,0.)); +#73432 = ADVANCED_FACE('',(#73433),#73444,.T.); +#73433 = FACE_BOUND('',#73434,.T.); +#73434 = EDGE_LOOP('',(#73435,#73436,#73437,#73438)); +#73435 = ORIENTED_EDGE('',*,*,#73414,.T.); +#73436 = ORIENTED_EDGE('',*,*,#73384,.T.); +#73437 = ORIENTED_EDGE('',*,*,#73329,.F.); +#73438 = ORIENTED_EDGE('',*,*,#73439,.F.); +#73439 = EDGE_CURVE('',#73415,#73330,#73440,.T.); +#73440 = LINE('',#73441,#73442); +#73441 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73442 = VECTOR('',#73443,1.); +#73443 = DIRECTION('',(-1.,0.,0.)); +#73444 = PLANE('',#73445); +#73445 = AXIS2_PLACEMENT_3D('',#73446,#73447,#73448); +#73446 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73447 = DIRECTION('',(0.,-1.,0.)); +#73448 = DIRECTION('',(-1.,0.,0.)); +#73449 = ADVANCED_FACE('',(#73450),#73456,.T.); +#73450 = FACE_BOUND('',#73451,.T.); +#73451 = EDGE_LOOP('',(#73452,#73453,#73454,#73455)); +#73452 = ORIENTED_EDGE('',*,*,#71109,.F.); +#73453 = ORIENTED_EDGE('',*,*,#73347,.T.); +#73454 = ORIENTED_EDGE('',*,*,#73368,.T.); +#73455 = ORIENTED_EDGE('',*,*,#73407,.F.); +#73456 = PLANE('',#73457); +#73457 = AXIS2_PLACEMENT_3D('',#73458,#73459,#73460); +#73458 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73459 = DIRECTION('',(0.,1.,0.)); +#73460 = DIRECTION('',(1.,0.,0.)); +#73461 = ADVANCED_FACE('',(#73462),#73480,.F.); +#73462 = FACE_BOUND('',#73463,.F.); +#73463 = EDGE_LOOP('',(#73464,#73472,#73473,#73474)); +#73464 = ORIENTED_EDGE('',*,*,#73465,.F.); +#73465 = EDGE_CURVE('',#73400,#73466,#73468,.T.); +#73466 = VERTEX_POINT('',#73467); +#73467 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#73468 = LINE('',#73469,#73470); +#73469 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73470 = VECTOR('',#73471,1.); +#73471 = DIRECTION('',(1.,0.,0.)); +#73472 = ORIENTED_EDGE('',*,*,#73399,.T.); +#73473 = ORIENTED_EDGE('',*,*,#71101,.T.); +#73474 = ORIENTED_EDGE('',*,*,#73475,.F.); +#73475 = EDGE_CURVE('',#73466,#71094,#73476,.T.); +#73476 = LINE('',#73477,#73478); +#73477 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#73478 = VECTOR('',#73479,1.); +#73479 = DIRECTION('',(0.,0.,1.)); +#73480 = PLANE('',#73481); +#73481 = AXIS2_PLACEMENT_3D('',#73482,#73483,#73484); +#73482 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73483 = DIRECTION('',(0.,1.,0.)); +#73484 = DIRECTION('',(1.,0.,0.)); +#73485 = ADVANCED_FACE('',(#73486),#73519,.T.); +#73486 = FACE_BOUND('',#73487,.T.); +#73487 = EDGE_LOOP('',(#73488,#73498,#73506,#73512,#73513)); +#73488 = ORIENTED_EDGE('',*,*,#73489,.T.); +#73489 = EDGE_CURVE('',#73490,#73492,#73494,.T.); +#73490 = VERTEX_POINT('',#73491); +#73491 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73492 = VERTEX_POINT('',#73493); +#73493 = CARTESIAN_POINT('',(1.55,-1.96,1.59)); +#73494 = LINE('',#73495,#73496); +#73495 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73496 = VECTOR('',#73497,1.); +#73497 = DIRECTION('',(0.,0.,1.)); +#73498 = ORIENTED_EDGE('',*,*,#73499,.T.); +#73499 = EDGE_CURVE('',#73492,#73500,#73502,.T.); +#73500 = VERTEX_POINT('',#73501); +#73501 = CARTESIAN_POINT('',(1.55,-2.26,1.59)); +#73502 = LINE('',#73503,#73504); +#73503 = CARTESIAN_POINT('',(1.55,-1.96,1.59)); +#73504 = VECTOR('',#73505,1.); +#73505 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73506 = ORIENTED_EDGE('',*,*,#73507,.F.); +#73507 = EDGE_CURVE('',#71094,#73500,#73508,.T.); +#73508 = LINE('',#73509,#73510); +#73509 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#73510 = VECTOR('',#73511,1.); +#73511 = DIRECTION('',(0.,0.,1.)); +#73512 = ORIENTED_EDGE('',*,*,#73475,.F.); +#73513 = ORIENTED_EDGE('',*,*,#73514,.F.); +#73514 = EDGE_CURVE('',#73490,#73466,#73515,.T.); +#73515 = LINE('',#73516,#73517); +#73516 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73517 = VECTOR('',#73518,1.); +#73518 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73519 = PLANE('',#73520); +#73520 = AXIS2_PLACEMENT_3D('',#73521,#73522,#73523); +#73521 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73522 = DIRECTION('',(1.,0.,0.)); +#73523 = DIRECTION('',(0.,-1.,0.)); +#73524 = ADVANCED_FACE('',(#73525),#73550,.F.); +#73525 = FACE_BOUND('',#73526,.F.); +#73526 = EDGE_LOOP('',(#73527,#73535,#73543,#73549)); +#73527 = ORIENTED_EDGE('',*,*,#73528,.T.); +#73528 = EDGE_CURVE('',#73500,#73529,#73531,.T.); +#73529 = VERTEX_POINT('',#73530); +#73530 = CARTESIAN_POINT('',(1.85,-2.26,1.59)); +#73531 = LINE('',#73532,#73533); +#73532 = CARTESIAN_POINT('',(1.55,-2.26,1.59)); +#73533 = VECTOR('',#73534,1.); +#73534 = DIRECTION('',(1.,0.,0.)); +#73535 = ORIENTED_EDGE('',*,*,#73536,.T.); +#73536 = EDGE_CURVE('',#73529,#73537,#73539,.T.); +#73537 = VERTEX_POINT('',#73538); +#73538 = CARTESIAN_POINT('',(1.85,-1.96,1.59)); +#73539 = LINE('',#73540,#73541); +#73540 = CARTESIAN_POINT('',(1.85,-2.26,1.59)); +#73541 = VECTOR('',#73542,1.); +#73542 = DIRECTION('',(0.,1.,2.2E-16)); +#73543 = ORIENTED_EDGE('',*,*,#73544,.T.); +#73544 = EDGE_CURVE('',#73537,#73492,#73545,.T.); +#73545 = LINE('',#73546,#73547); +#73546 = CARTESIAN_POINT('',(1.85,-1.96,1.59)); +#73547 = VECTOR('',#73548,1.); +#73548 = DIRECTION('',(-1.,0.,0.)); +#73549 = ORIENTED_EDGE('',*,*,#73499,.T.); +#73550 = PLANE('',#73551); +#73551 = AXIS2_PLACEMENT_3D('',#73552,#73553,#73554); +#73552 = CARTESIAN_POINT('',(1.7,-2.11,1.59)); +#73553 = DIRECTION('',(0.,-2.2E-16,1.)); +#73554 = DIRECTION('',(1.,0.,0.)); +#73555 = ADVANCED_FACE('',(#73556),#73597,.T.); +#73556 = FACE_BOUND('',#73557,.T.); +#73557 = EDGE_LOOP('',(#73558,#73568,#73576,#73582,#73583,#73591)); +#73558 = ORIENTED_EDGE('',*,*,#73559,.T.); +#73559 = EDGE_CURVE('',#73560,#73562,#73564,.T.); +#73560 = VERTEX_POINT('',#73561); +#73561 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73562 = VERTEX_POINT('',#73563); +#73563 = CARTESIAN_POINT('',(1.85,-2.26,0.59)); +#73564 = LINE('',#73565,#73566); +#73565 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73566 = VECTOR('',#73567,1.); +#73567 = DIRECTION('',(0.,0.,1.)); +#73568 = ORIENTED_EDGE('',*,*,#73569,.T.); +#73569 = EDGE_CURVE('',#73562,#73570,#73572,.T.); +#73570 = VERTEX_POINT('',#73571); +#73571 = CARTESIAN_POINT('',(1.85,-2.26,0.765)); +#73572 = LINE('',#73573,#73574); +#73573 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73574 = VECTOR('',#73575,1.); +#73575 = DIRECTION('',(0.,0.,1.)); +#73576 = ORIENTED_EDGE('',*,*,#73577,.T.); +#73577 = EDGE_CURVE('',#73570,#73529,#73578,.T.); +#73578 = LINE('',#73579,#73580); +#73579 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73580 = VECTOR('',#73581,1.); +#73581 = DIRECTION('',(0.,0.,1.)); +#73582 = ORIENTED_EDGE('',*,*,#73536,.T.); +#73583 = ORIENTED_EDGE('',*,*,#73584,.F.); +#73584 = EDGE_CURVE('',#73585,#73537,#73587,.T.); +#73585 = VERTEX_POINT('',#73586); +#73586 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#73587 = LINE('',#73588,#73589); +#73588 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#73589 = VECTOR('',#73590,1.); +#73590 = DIRECTION('',(0.,0.,1.)); +#73591 = ORIENTED_EDGE('',*,*,#73592,.F.); +#73592 = EDGE_CURVE('',#73560,#73585,#73593,.T.); +#73593 = LINE('',#73594,#73595); +#73594 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73595 = VECTOR('',#73596,1.); +#73596 = DIRECTION('',(0.,1.,2.2E-16)); +#73597 = PLANE('',#73598); +#73598 = AXIS2_PLACEMENT_3D('',#73599,#73600,#73601); +#73599 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73600 = DIRECTION('',(-1.,0.,0.)); +#73601 = DIRECTION('',(0.,1.,0.)); +#73602 = ADVANCED_FACE('',(#73603),#73636,.F.); +#73603 = FACE_BOUND('',#73604,.F.); +#73604 = EDGE_LOOP('',(#73605,#73613,#73614,#73622,#73630)); +#73605 = ORIENTED_EDGE('',*,*,#73606,.F.); +#73606 = EDGE_CURVE('',#73562,#73607,#73609,.T.); +#73607 = VERTEX_POINT('',#73608); +#73608 = CARTESIAN_POINT('',(2.4,-2.26,0.59)); +#73609 = LINE('',#73610,#73611); +#73610 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#73611 = VECTOR('',#73612,1.); +#73612 = DIRECTION('',(1.,0.,0.)); +#73613 = ORIENTED_EDGE('',*,*,#73569,.T.); +#73614 = ORIENTED_EDGE('',*,*,#73615,.F.); +#73615 = EDGE_CURVE('',#73616,#73570,#73618,.T.); +#73616 = VERTEX_POINT('',#73617); +#73617 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73618 = LINE('',#73619,#73620); +#73619 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73620 = VECTOR('',#73621,1.); +#73621 = DIRECTION('',(-0.707106781187,1.599999999999E-16, + -0.707106781187)); +#73622 = ORIENTED_EDGE('',*,*,#73623,.T.); +#73623 = EDGE_CURVE('',#73616,#73624,#73626,.T.); +#73624 = VERTEX_POINT('',#73625); +#73625 = CARTESIAN_POINT('',(2.4,-2.26,1.19)); +#73626 = LINE('',#73627,#73628); +#73627 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73628 = VECTOR('',#73629,1.); +#73629 = DIRECTION('',(1.,0.,0.)); +#73630 = ORIENTED_EDGE('',*,*,#73631,.F.); +#73631 = EDGE_CURVE('',#73607,#73624,#73632,.T.); +#73632 = LINE('',#73633,#73634); +#73633 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73634 = VECTOR('',#73635,1.); +#73635 = DIRECTION('',(0.,0.,1.)); +#73636 = PLANE('',#73637); +#73637 = AXIS2_PLACEMENT_3D('',#73638,#73639,#73640); +#73638 = CARTESIAN_POINT('',(2.975,-2.26,0.826809470956)); +#73639 = DIRECTION('',(0.,1.,2.2E-16)); +#73640 = DIRECTION('',(0.,-2.2E-16,1.)); +#73641 = ADVANCED_FACE('',(#73642),#73683,.T.); +#73642 = FACE_BOUND('',#73643,.T.); +#73643 = EDGE_LOOP('',(#73644,#73654,#73662,#73668,#73669,#73677)); +#73644 = ORIENTED_EDGE('',*,*,#73645,.T.); +#73645 = EDGE_CURVE('',#73646,#73648,#73650,.T.); +#73646 = VERTEX_POINT('',#73647); +#73647 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73648 = VERTEX_POINT('',#73649); +#73649 = CARTESIAN_POINT('',(2.4,-1.96,1.59)); +#73650 = LINE('',#73651,#73652); +#73651 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73652 = VECTOR('',#73653,1.); +#73653 = DIRECTION('',(0.,0.,1.)); +#73654 = ORIENTED_EDGE('',*,*,#73655,.T.); +#73655 = EDGE_CURVE('',#73648,#73656,#73658,.T.); +#73656 = VERTEX_POINT('',#73657); +#73657 = CARTESIAN_POINT('',(2.4,-2.26,1.59)); +#73658 = LINE('',#73659,#73660); +#73659 = CARTESIAN_POINT('',(2.4,-1.96,1.59)); +#73660 = VECTOR('',#73661,1.); +#73661 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73662 = ORIENTED_EDGE('',*,*,#73663,.F.); +#73663 = EDGE_CURVE('',#73624,#73656,#73664,.T.); +#73664 = LINE('',#73665,#73666); +#73665 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73666 = VECTOR('',#73667,1.); +#73667 = DIRECTION('',(0.,0.,1.)); +#73668 = ORIENTED_EDGE('',*,*,#73631,.F.); +#73669 = ORIENTED_EDGE('',*,*,#73670,.F.); +#73670 = EDGE_CURVE('',#73671,#73607,#73673,.T.); +#73671 = VERTEX_POINT('',#73672); +#73672 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73673 = LINE('',#73674,#73675); +#73674 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73675 = VECTOR('',#73676,1.); +#73676 = DIRECTION('',(0.,0.,1.)); +#73677 = ORIENTED_EDGE('',*,*,#73678,.F.); +#73678 = EDGE_CURVE('',#73646,#73671,#73679,.T.); +#73679 = LINE('',#73680,#73681); +#73680 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73681 = VECTOR('',#73682,1.); +#73682 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73683 = PLANE('',#73684); +#73684 = AXIS2_PLACEMENT_3D('',#73685,#73686,#73687); +#73685 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73686 = DIRECTION('',(1.,0.,0.)); +#73687 = DIRECTION('',(0.,-1.,0.)); +#73688 = ADVANCED_FACE('',(#73689),#73714,.T.); +#73689 = FACE_BOUND('',#73690,.T.); +#73690 = EDGE_LOOP('',(#73691,#73699,#73700,#73708)); +#73691 = ORIENTED_EDGE('',*,*,#73692,.F.); +#73692 = EDGE_CURVE('',#73624,#73693,#73695,.T.); +#73693 = VERTEX_POINT('',#73694); +#73694 = CARTESIAN_POINT('',(2.7,-2.26,1.19)); +#73695 = LINE('',#73696,#73697); +#73696 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73697 = VECTOR('',#73698,1.); +#73698 = DIRECTION('',(1.,0.,0.)); +#73699 = ORIENTED_EDGE('',*,*,#73663,.T.); +#73700 = ORIENTED_EDGE('',*,*,#73701,.T.); +#73701 = EDGE_CURVE('',#73656,#73702,#73704,.T.); +#73702 = VERTEX_POINT('',#73703); +#73703 = CARTESIAN_POINT('',(2.7,-2.26,1.59)); +#73704 = LINE('',#73705,#73706); +#73705 = CARTESIAN_POINT('',(2.4,-2.26,1.59)); +#73706 = VECTOR('',#73707,1.); +#73707 = DIRECTION('',(1.,0.,0.)); +#73708 = ORIENTED_EDGE('',*,*,#73709,.F.); +#73709 = EDGE_CURVE('',#73693,#73702,#73710,.T.); +#73710 = LINE('',#73711,#73712); +#73711 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73712 = VECTOR('',#73713,1.); +#73713 = DIRECTION('',(0.,0.,1.)); +#73714 = PLANE('',#73715); +#73715 = AXIS2_PLACEMENT_3D('',#73716,#73717,#73718); +#73716 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73717 = DIRECTION('',(0.,1.,0.)); +#73718 = DIRECTION('',(1.,0.,0.)); +#73719 = ADVANCED_FACE('',(#73720),#73761,.T.); +#73720 = FACE_BOUND('',#73721,.T.); +#73721 = EDGE_LOOP('',(#73722,#73732,#73738,#73739,#73747,#73755)); +#73722 = ORIENTED_EDGE('',*,*,#73723,.T.); +#73723 = EDGE_CURVE('',#73724,#73726,#73728,.T.); +#73724 = VERTEX_POINT('',#73725); +#73725 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73726 = VERTEX_POINT('',#73727); +#73727 = CARTESIAN_POINT('',(2.7,-2.26,0.59)); +#73728 = LINE('',#73729,#73730); +#73729 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73730 = VECTOR('',#73731,1.); +#73731 = DIRECTION('',(0.,0.,1.)); +#73732 = ORIENTED_EDGE('',*,*,#73733,.T.); +#73733 = EDGE_CURVE('',#73726,#73693,#73734,.T.); +#73734 = LINE('',#73735,#73736); +#73735 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73736 = VECTOR('',#73737,1.); +#73737 = DIRECTION('',(0.,0.,1.)); +#73738 = ORIENTED_EDGE('',*,*,#73709,.T.); +#73739 = ORIENTED_EDGE('',*,*,#73740,.T.); +#73740 = EDGE_CURVE('',#73702,#73741,#73743,.T.); +#73741 = VERTEX_POINT('',#73742); +#73742 = CARTESIAN_POINT('',(2.7,-1.96,1.59)); +#73743 = LINE('',#73744,#73745); +#73744 = CARTESIAN_POINT('',(2.7,-2.26,1.59)); +#73745 = VECTOR('',#73746,1.); +#73746 = DIRECTION('',(0.,1.,2.2E-16)); +#73747 = ORIENTED_EDGE('',*,*,#73748,.F.); +#73748 = EDGE_CURVE('',#73749,#73741,#73751,.T.); +#73749 = VERTEX_POINT('',#73750); +#73750 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#73751 = LINE('',#73752,#73753); +#73752 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#73753 = VECTOR('',#73754,1.); +#73754 = DIRECTION('',(0.,0.,1.)); +#73755 = ORIENTED_EDGE('',*,*,#73756,.F.); +#73756 = EDGE_CURVE('',#73724,#73749,#73757,.T.); +#73757 = LINE('',#73758,#73759); +#73758 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73759 = VECTOR('',#73760,1.); +#73760 = DIRECTION('',(0.,1.,2.2E-16)); +#73761 = PLANE('',#73762); +#73762 = AXIS2_PLACEMENT_3D('',#73763,#73764,#73765); +#73763 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73764 = DIRECTION('',(-1.,0.,0.)); +#73765 = DIRECTION('',(0.,1.,0.)); +#73766 = ADVANCED_FACE('',(#73767),#73792,.F.); +#73767 = FACE_BOUND('',#73768,.F.); +#73768 = EDGE_LOOP('',(#73769,#73777,#73778,#73786)); +#73769 = ORIENTED_EDGE('',*,*,#73770,.F.); +#73770 = EDGE_CURVE('',#73726,#73771,#73773,.T.); +#73771 = VERTEX_POINT('',#73772); +#73772 = CARTESIAN_POINT('',(3.25,-2.26,0.59)); +#73773 = LINE('',#73774,#73775); +#73774 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#73775 = VECTOR('',#73776,1.); +#73776 = DIRECTION('',(1.,0.,0.)); +#73777 = ORIENTED_EDGE('',*,*,#73733,.T.); +#73778 = ORIENTED_EDGE('',*,*,#73779,.T.); +#73779 = EDGE_CURVE('',#73693,#73780,#73782,.T.); +#73780 = VERTEX_POINT('',#73781); +#73781 = CARTESIAN_POINT('',(3.25,-2.26,1.19)); +#73782 = LINE('',#73783,#73784); +#73783 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73784 = VECTOR('',#73785,1.); +#73785 = DIRECTION('',(1.,0.,0.)); +#73786 = ORIENTED_EDGE('',*,*,#73787,.F.); +#73787 = EDGE_CURVE('',#73771,#73780,#73788,.T.); +#73788 = LINE('',#73789,#73790); +#73789 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73790 = VECTOR('',#73791,1.); +#73791 = DIRECTION('',(0.,0.,1.)); +#73792 = PLANE('',#73793); +#73793 = AXIS2_PLACEMENT_3D('',#73794,#73795,#73796); +#73794 = CARTESIAN_POINT('',(2.975,-2.26,0.826809470956)); +#73795 = DIRECTION('',(0.,1.,2.2E-16)); +#73796 = DIRECTION('',(0.,-2.2E-16,1.)); +#73797 = ADVANCED_FACE('',(#73798),#73839,.T.); +#73798 = FACE_BOUND('',#73799,.T.); +#73799 = EDGE_LOOP('',(#73800,#73810,#73818,#73824,#73825,#73833)); +#73800 = ORIENTED_EDGE('',*,*,#73801,.T.); +#73801 = EDGE_CURVE('',#73802,#73804,#73806,.T.); +#73802 = VERTEX_POINT('',#73803); +#73803 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73804 = VERTEX_POINT('',#73805); +#73805 = CARTESIAN_POINT('',(3.25,-1.96,1.59)); +#73806 = LINE('',#73807,#73808); +#73807 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73808 = VECTOR('',#73809,1.); +#73809 = DIRECTION('',(0.,0.,1.)); +#73810 = ORIENTED_EDGE('',*,*,#73811,.T.); +#73811 = EDGE_CURVE('',#73804,#73812,#73814,.T.); +#73812 = VERTEX_POINT('',#73813); +#73813 = CARTESIAN_POINT('',(3.25,-2.26,1.59)); +#73814 = LINE('',#73815,#73816); +#73815 = CARTESIAN_POINT('',(3.25,-1.96,1.59)); +#73816 = VECTOR('',#73817,1.); +#73817 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73818 = ORIENTED_EDGE('',*,*,#73819,.F.); +#73819 = EDGE_CURVE('',#73780,#73812,#73820,.T.); +#73820 = LINE('',#73821,#73822); +#73821 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73822 = VECTOR('',#73823,1.); +#73823 = DIRECTION('',(0.,0.,1.)); +#73824 = ORIENTED_EDGE('',*,*,#73787,.F.); +#73825 = ORIENTED_EDGE('',*,*,#73826,.F.); +#73826 = EDGE_CURVE('',#73827,#73771,#73829,.T.); +#73827 = VERTEX_POINT('',#73828); +#73828 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73829 = LINE('',#73830,#73831); +#73830 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73831 = VECTOR('',#73832,1.); +#73832 = DIRECTION('',(0.,0.,1.)); +#73833 = ORIENTED_EDGE('',*,*,#73834,.F.); +#73834 = EDGE_CURVE('',#73802,#73827,#73835,.T.); +#73835 = LINE('',#73836,#73837); +#73836 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73837 = VECTOR('',#73838,1.); +#73838 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73839 = PLANE('',#73840); +#73840 = AXIS2_PLACEMENT_3D('',#73841,#73842,#73843); +#73841 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73842 = DIRECTION('',(1.,0.,0.)); +#73843 = DIRECTION('',(0.,-1.,0.)); +#73844 = ADVANCED_FACE('',(#73845),#73870,.T.); +#73845 = FACE_BOUND('',#73846,.T.); +#73846 = EDGE_LOOP('',(#73847,#73855,#73856,#73864)); +#73847 = ORIENTED_EDGE('',*,*,#73848,.F.); +#73848 = EDGE_CURVE('',#73780,#73849,#73851,.T.); +#73849 = VERTEX_POINT('',#73850); +#73850 = CARTESIAN_POINT('',(3.55,-2.26,1.19)); +#73851 = LINE('',#73852,#73853); +#73852 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73853 = VECTOR('',#73854,1.); +#73854 = DIRECTION('',(1.,0.,0.)); +#73855 = ORIENTED_EDGE('',*,*,#73819,.T.); +#73856 = ORIENTED_EDGE('',*,*,#73857,.T.); +#73857 = EDGE_CURVE('',#73812,#73858,#73860,.T.); +#73858 = VERTEX_POINT('',#73859); +#73859 = CARTESIAN_POINT('',(3.55,-2.26,1.59)); +#73860 = LINE('',#73861,#73862); +#73861 = CARTESIAN_POINT('',(3.25,-2.26,1.59)); +#73862 = VECTOR('',#73863,1.); +#73863 = DIRECTION('',(1.,0.,0.)); +#73864 = ORIENTED_EDGE('',*,*,#73865,.F.); +#73865 = EDGE_CURVE('',#73849,#73858,#73866,.T.); +#73866 = LINE('',#73867,#73868); +#73867 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73868 = VECTOR('',#73869,1.); +#73869 = DIRECTION('',(0.,0.,1.)); +#73870 = PLANE('',#73871); +#73871 = AXIS2_PLACEMENT_3D('',#73872,#73873,#73874); +#73872 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73873 = DIRECTION('',(0.,1.,0.)); +#73874 = DIRECTION('',(1.,0.,0.)); +#73875 = ADVANCED_FACE('',(#73876),#73917,.T.); +#73876 = FACE_BOUND('',#73877,.T.); +#73877 = EDGE_LOOP('',(#73878,#73888,#73894,#73895,#73903,#73911)); +#73878 = ORIENTED_EDGE('',*,*,#73879,.T.); +#73879 = EDGE_CURVE('',#73880,#73882,#73884,.T.); +#73880 = VERTEX_POINT('',#73881); +#73881 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73882 = VERTEX_POINT('',#73883); +#73883 = CARTESIAN_POINT('',(3.55,-2.26,0.59)); +#73884 = LINE('',#73885,#73886); +#73885 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73886 = VECTOR('',#73887,1.); +#73887 = DIRECTION('',(0.,0.,1.)); +#73888 = ORIENTED_EDGE('',*,*,#73889,.T.); +#73889 = EDGE_CURVE('',#73882,#73849,#73890,.T.); +#73890 = LINE('',#73891,#73892); +#73891 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73892 = VECTOR('',#73893,1.); +#73893 = DIRECTION('',(0.,0.,1.)); +#73894 = ORIENTED_EDGE('',*,*,#73865,.T.); +#73895 = ORIENTED_EDGE('',*,*,#73896,.T.); +#73896 = EDGE_CURVE('',#73858,#73897,#73899,.T.); +#73897 = VERTEX_POINT('',#73898); +#73898 = CARTESIAN_POINT('',(3.55,-1.96,1.59)); +#73899 = LINE('',#73900,#73901); +#73900 = CARTESIAN_POINT('',(3.55,-2.26,1.59)); +#73901 = VECTOR('',#73902,1.); +#73902 = DIRECTION('',(0.,1.,2.2E-16)); +#73903 = ORIENTED_EDGE('',*,*,#73904,.F.); +#73904 = EDGE_CURVE('',#73905,#73897,#73907,.T.); +#73905 = VERTEX_POINT('',#73906); +#73906 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#73907 = LINE('',#73908,#73909); +#73908 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#73909 = VECTOR('',#73910,1.); +#73910 = DIRECTION('',(0.,0.,1.)); +#73911 = ORIENTED_EDGE('',*,*,#73912,.F.); +#73912 = EDGE_CURVE('',#73880,#73905,#73913,.T.); +#73913 = LINE('',#73914,#73915); +#73914 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73915 = VECTOR('',#73916,1.); +#73916 = DIRECTION('',(0.,1.,2.2E-16)); +#73917 = PLANE('',#73918); +#73918 = AXIS2_PLACEMENT_3D('',#73919,#73920,#73921); +#73919 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73920 = DIRECTION('',(-1.,0.,0.)); +#73921 = DIRECTION('',(0.,1.,0.)); +#73922 = ADVANCED_FACE('',(#73923),#73956,.F.); +#73923 = FACE_BOUND('',#73924,.F.); +#73924 = EDGE_LOOP('',(#73925,#73933,#73934,#73942,#73950)); +#73925 = ORIENTED_EDGE('',*,*,#73926,.F.); +#73926 = EDGE_CURVE('',#73882,#73927,#73929,.T.); +#73927 = VERTEX_POINT('',#73928); +#73928 = CARTESIAN_POINT('',(4.1,-2.26,0.59)); +#73929 = LINE('',#73930,#73931); +#73930 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#73931 = VECTOR('',#73932,1.); +#73932 = DIRECTION('',(1.,0.,0.)); +#73933 = ORIENTED_EDGE('',*,*,#73889,.T.); +#73934 = ORIENTED_EDGE('',*,*,#73935,.T.); +#73935 = EDGE_CURVE('',#73849,#73936,#73938,.T.); +#73936 = VERTEX_POINT('',#73937); +#73937 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#73938 = LINE('',#73939,#73940); +#73939 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73940 = VECTOR('',#73941,1.); +#73941 = DIRECTION('',(1.,0.,0.)); +#73942 = ORIENTED_EDGE('',*,*,#73943,.T.); +#73943 = EDGE_CURVE('',#73936,#73944,#73946,.T.); +#73944 = VERTEX_POINT('',#73945); +#73945 = CARTESIAN_POINT('',(4.1,-2.26,0.765)); +#73946 = LINE('',#73947,#73948); +#73947 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#73948 = VECTOR('',#73949,1.); +#73949 = DIRECTION('',(0.707106781187,1.599999999999E-16,-0.707106781187 + )); +#73950 = ORIENTED_EDGE('',*,*,#73951,.F.); +#73951 = EDGE_CURVE('',#73927,#73944,#73952,.T.); +#73952 = LINE('',#73953,#73954); +#73953 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73954 = VECTOR('',#73955,1.); +#73955 = DIRECTION('',(0.,0.,1.)); +#73956 = PLANE('',#73957); +#73957 = AXIS2_PLACEMENT_3D('',#73958,#73959,#73960); +#73958 = CARTESIAN_POINT('',(2.975,-2.26,0.826809470956)); +#73959 = DIRECTION('',(0.,1.,2.2E-16)); +#73960 = DIRECTION('',(0.,-2.2E-16,1.)); +#73961 = ADVANCED_FACE('',(#73962),#74003,.T.); +#73962 = FACE_BOUND('',#73963,.T.); +#73963 = EDGE_LOOP('',(#73964,#73974,#73982,#73988,#73989,#73997)); +#73964 = ORIENTED_EDGE('',*,*,#73965,.T.); +#73965 = EDGE_CURVE('',#73966,#73968,#73970,.T.); +#73966 = VERTEX_POINT('',#73967); +#73967 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#73968 = VERTEX_POINT('',#73969); +#73969 = CARTESIAN_POINT('',(4.1,-1.96,1.59)); +#73970 = LINE('',#73971,#73972); +#73971 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#73972 = VECTOR('',#73973,1.); +#73973 = DIRECTION('',(0.,0.,1.)); +#73974 = ORIENTED_EDGE('',*,*,#73975,.T.); +#73975 = EDGE_CURVE('',#73968,#73976,#73978,.T.); +#73976 = VERTEX_POINT('',#73977); +#73977 = CARTESIAN_POINT('',(4.1,-2.26,1.59)); +#73978 = LINE('',#73979,#73980); +#73979 = CARTESIAN_POINT('',(4.1,-1.96,1.59)); +#73980 = VECTOR('',#73981,1.); +#73981 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73982 = ORIENTED_EDGE('',*,*,#73983,.F.); +#73983 = EDGE_CURVE('',#73944,#73976,#73984,.T.); +#73984 = LINE('',#73985,#73986); +#73985 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73986 = VECTOR('',#73987,1.); +#73987 = DIRECTION('',(0.,0.,1.)); +#73988 = ORIENTED_EDGE('',*,*,#73951,.F.); +#73989 = ORIENTED_EDGE('',*,*,#73990,.F.); +#73990 = EDGE_CURVE('',#73991,#73927,#73993,.T.); +#73991 = VERTEX_POINT('',#73992); +#73992 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73993 = LINE('',#73994,#73995); +#73994 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73995 = VECTOR('',#73996,1.); +#73996 = DIRECTION('',(0.,0.,1.)); +#73997 = ORIENTED_EDGE('',*,*,#73998,.F.); +#73998 = EDGE_CURVE('',#73966,#73991,#73999,.T.); +#73999 = LINE('',#74000,#74001); +#74000 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#74001 = VECTOR('',#74002,1.); +#74002 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74003 = PLANE('',#74004); +#74004 = AXIS2_PLACEMENT_3D('',#74005,#74006,#74007); +#74005 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#74006 = DIRECTION('',(1.,0.,0.)); +#74007 = DIRECTION('',(0.,-1.,0.)); +#74008 = ADVANCED_FACE('',(#74009),#74034,.F.); +#74009 = FACE_BOUND('',#74010,.F.); +#74010 = EDGE_LOOP('',(#74011,#74019,#74027,#74033)); +#74011 = ORIENTED_EDGE('',*,*,#74012,.T.); +#74012 = EDGE_CURVE('',#73976,#74013,#74015,.T.); +#74013 = VERTEX_POINT('',#74014); +#74014 = CARTESIAN_POINT('',(4.4,-2.26,1.59)); +#74015 = LINE('',#74016,#74017); +#74016 = CARTESIAN_POINT('',(4.1,-2.26,1.59)); +#74017 = VECTOR('',#74018,1.); +#74018 = DIRECTION('',(1.,0.,0.)); +#74019 = ORIENTED_EDGE('',*,*,#74020,.T.); +#74020 = EDGE_CURVE('',#74013,#74021,#74023,.T.); +#74021 = VERTEX_POINT('',#74022); +#74022 = CARTESIAN_POINT('',(4.4,-1.96,1.59)); +#74023 = LINE('',#74024,#74025); +#74024 = CARTESIAN_POINT('',(4.4,-2.26,1.59)); +#74025 = VECTOR('',#74026,1.); +#74026 = DIRECTION('',(0.,1.,2.2E-16)); +#74027 = ORIENTED_EDGE('',*,*,#74028,.T.); +#74028 = EDGE_CURVE('',#74021,#73968,#74029,.T.); +#74029 = LINE('',#74030,#74031); +#74030 = CARTESIAN_POINT('',(4.4,-1.96,1.59)); +#74031 = VECTOR('',#74032,1.); +#74032 = DIRECTION('',(-1.,0.,0.)); +#74033 = ORIENTED_EDGE('',*,*,#73975,.T.); +#74034 = PLANE('',#74035); +#74035 = AXIS2_PLACEMENT_3D('',#74036,#74037,#74038); +#74036 = CARTESIAN_POINT('',(4.25,-2.11,1.59)); +#74037 = DIRECTION('',(0.,-2.2E-16,1.)); +#74038 = DIRECTION('',(1.,0.,0.)); +#74039 = ADVANCED_FACE('',(#74040),#74071,.T.); +#74040 = FACE_BOUND('',#74041,.T.); +#74041 = EDGE_LOOP('',(#74042,#74050,#74056,#74057,#74065)); +#74042 = ORIENTED_EDGE('',*,*,#74043,.T.); +#74043 = EDGE_CURVE('',#74044,#71054,#74046,.T.); +#74044 = VERTEX_POINT('',#74045); +#74045 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74046 = LINE('',#74047,#74048); +#74047 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74048 = VECTOR('',#74049,1.); +#74049 = DIRECTION('',(0.,0.,1.)); +#74050 = ORIENTED_EDGE('',*,*,#74051,.T.); +#74051 = EDGE_CURVE('',#71054,#74013,#74052,.T.); +#74052 = LINE('',#74053,#74054); +#74053 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74054 = VECTOR('',#74055,1.); +#74055 = DIRECTION('',(0.,0.,1.)); +#74056 = ORIENTED_EDGE('',*,*,#74020,.T.); +#74057 = ORIENTED_EDGE('',*,*,#74058,.F.); +#74058 = EDGE_CURVE('',#74059,#74021,#74061,.T.); +#74059 = VERTEX_POINT('',#74060); +#74060 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74061 = LINE('',#74062,#74063); +#74062 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74063 = VECTOR('',#74064,1.); +#74064 = DIRECTION('',(0.,0.,1.)); +#74065 = ORIENTED_EDGE('',*,*,#74066,.F.); +#74066 = EDGE_CURVE('',#74044,#74059,#74067,.T.); +#74067 = LINE('',#74068,#74069); +#74068 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74069 = VECTOR('',#74070,1.); +#74070 = DIRECTION('',(0.,1.,2.2E-16)); +#74071 = PLANE('',#74072); +#74072 = AXIS2_PLACEMENT_3D('',#74073,#74074,#74075); +#74073 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74074 = DIRECTION('',(-1.,0.,0.)); +#74075 = DIRECTION('',(0.,1.,0.)); +#74076 = ADVANCED_FACE('',(#74077),#74088,.T.); +#74077 = FACE_BOUND('',#74078,.T.); +#74078 = EDGE_LOOP('',(#74079,#74080,#74081,#74082)); +#74079 = ORIENTED_EDGE('',*,*,#74058,.T.); +#74080 = ORIENTED_EDGE('',*,*,#74028,.T.); +#74081 = ORIENTED_EDGE('',*,*,#73965,.F.); +#74082 = ORIENTED_EDGE('',*,*,#74083,.F.); +#74083 = EDGE_CURVE('',#74059,#73966,#74084,.T.); +#74084 = LINE('',#74085,#74086); +#74085 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74086 = VECTOR('',#74087,1.); +#74087 = DIRECTION('',(-1.,0.,0.)); +#74088 = PLANE('',#74089); +#74089 = AXIS2_PLACEMENT_3D('',#74090,#74091,#74092); +#74090 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74091 = DIRECTION('',(0.,-1.,0.)); +#74092 = DIRECTION('',(-1.,0.,0.)); +#74093 = ADVANCED_FACE('',(#74094),#74105,.F.); +#74094 = FACE_BOUND('',#74095,.F.); +#74095 = EDGE_LOOP('',(#74096,#74102,#74103,#74104)); +#74096 = ORIENTED_EDGE('',*,*,#74097,.F.); +#74097 = EDGE_CURVE('',#73880,#73991,#74098,.T.); +#74098 = LINE('',#74099,#74100); +#74099 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74100 = VECTOR('',#74101,1.); +#74101 = DIRECTION('',(1.,0.,0.)); +#74102 = ORIENTED_EDGE('',*,*,#73879,.T.); +#74103 = ORIENTED_EDGE('',*,*,#73926,.T.); +#74104 = ORIENTED_EDGE('',*,*,#73990,.F.); +#74105 = PLANE('',#74106); +#74106 = AXIS2_PLACEMENT_3D('',#74107,#74108,#74109); +#74107 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74108 = DIRECTION('',(0.,1.,0.)); +#74109 = DIRECTION('',(1.,0.,0.)); +#74110 = ADVANCED_FACE('',(#74111),#74122,.F.); +#74111 = FACE_BOUND('',#74112,.F.); +#74112 = EDGE_LOOP('',(#74113,#74114,#74115,#74121)); +#74113 = ORIENTED_EDGE('',*,*,#73857,.T.); +#74114 = ORIENTED_EDGE('',*,*,#73896,.T.); +#74115 = ORIENTED_EDGE('',*,*,#74116,.T.); +#74116 = EDGE_CURVE('',#73897,#73804,#74117,.T.); +#74117 = LINE('',#74118,#74119); +#74118 = CARTESIAN_POINT('',(3.55,-1.96,1.59)); +#74119 = VECTOR('',#74120,1.); +#74120 = DIRECTION('',(-1.,0.,0.)); +#74121 = ORIENTED_EDGE('',*,*,#73811,.T.); +#74122 = PLANE('',#74123); +#74123 = AXIS2_PLACEMENT_3D('',#74124,#74125,#74126); +#74124 = CARTESIAN_POINT('',(3.4,-2.11,1.59)); +#74125 = DIRECTION('',(0.,-2.2E-16,1.)); +#74126 = DIRECTION('',(1.,0.,0.)); +#74127 = ADVANCED_FACE('',(#74128),#74139,.T.); +#74128 = FACE_BOUND('',#74129,.T.); +#74129 = EDGE_LOOP('',(#74130,#74131,#74132,#74133)); +#74130 = ORIENTED_EDGE('',*,*,#73904,.T.); +#74131 = ORIENTED_EDGE('',*,*,#74116,.T.); +#74132 = ORIENTED_EDGE('',*,*,#73801,.F.); +#74133 = ORIENTED_EDGE('',*,*,#74134,.F.); +#74134 = EDGE_CURVE('',#73905,#73802,#74135,.T.); +#74135 = LINE('',#74136,#74137); +#74136 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#74137 = VECTOR('',#74138,1.); +#74138 = DIRECTION('',(-1.,0.,0.)); +#74139 = PLANE('',#74140); +#74140 = AXIS2_PLACEMENT_3D('',#74141,#74142,#74143); +#74141 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#74142 = DIRECTION('',(0.,-1.,0.)); +#74143 = DIRECTION('',(-1.,0.,0.)); +#74144 = ADVANCED_FACE('',(#74145),#74156,.F.); +#74145 = FACE_BOUND('',#74146,.F.); +#74146 = EDGE_LOOP('',(#74147,#74153,#74154,#74155)); +#74147 = ORIENTED_EDGE('',*,*,#74148,.F.); +#74148 = EDGE_CURVE('',#73724,#73827,#74149,.T.); +#74149 = LINE('',#74150,#74151); +#74150 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74151 = VECTOR('',#74152,1.); +#74152 = DIRECTION('',(1.,0.,0.)); +#74153 = ORIENTED_EDGE('',*,*,#73723,.T.); +#74154 = ORIENTED_EDGE('',*,*,#73770,.T.); +#74155 = ORIENTED_EDGE('',*,*,#73826,.F.); +#74156 = PLANE('',#74157); +#74157 = AXIS2_PLACEMENT_3D('',#74158,#74159,#74160); +#74158 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74159 = DIRECTION('',(0.,1.,0.)); +#74160 = DIRECTION('',(1.,0.,0.)); +#74161 = ADVANCED_FACE('',(#74162),#74173,.F.); +#74162 = FACE_BOUND('',#74163,.F.); +#74163 = EDGE_LOOP('',(#74164,#74165,#74166,#74172)); +#74164 = ORIENTED_EDGE('',*,*,#73701,.T.); +#74165 = ORIENTED_EDGE('',*,*,#73740,.T.); +#74166 = ORIENTED_EDGE('',*,*,#74167,.T.); +#74167 = EDGE_CURVE('',#73741,#73648,#74168,.T.); +#74168 = LINE('',#74169,#74170); +#74169 = CARTESIAN_POINT('',(2.7,-1.96,1.59)); +#74170 = VECTOR('',#74171,1.); +#74171 = DIRECTION('',(-1.,0.,0.)); +#74172 = ORIENTED_EDGE('',*,*,#73655,.T.); +#74173 = PLANE('',#74174); +#74174 = AXIS2_PLACEMENT_3D('',#74175,#74176,#74177); +#74175 = CARTESIAN_POINT('',(2.55,-2.11,1.59)); +#74176 = DIRECTION('',(0.,-2.2E-16,1.)); +#74177 = DIRECTION('',(1.,0.,0.)); +#74178 = ADVANCED_FACE('',(#74179),#74190,.T.); +#74179 = FACE_BOUND('',#74180,.T.); +#74180 = EDGE_LOOP('',(#74181,#74182,#74183,#74184)); +#74181 = ORIENTED_EDGE('',*,*,#73748,.T.); +#74182 = ORIENTED_EDGE('',*,*,#74167,.T.); +#74183 = ORIENTED_EDGE('',*,*,#73645,.F.); +#74184 = ORIENTED_EDGE('',*,*,#74185,.F.); +#74185 = EDGE_CURVE('',#73749,#73646,#74186,.T.); +#74186 = LINE('',#74187,#74188); +#74187 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#74188 = VECTOR('',#74189,1.); +#74189 = DIRECTION('',(-1.,0.,0.)); +#74190 = PLANE('',#74191); +#74191 = AXIS2_PLACEMENT_3D('',#74192,#74193,#74194); +#74192 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#74193 = DIRECTION('',(0.,-1.,0.)); +#74194 = DIRECTION('',(-1.,0.,0.)); +#74195 = ADVANCED_FACE('',(#74196),#74225,.F.); +#74196 = FACE_BOUND('',#74197,.F.); +#74197 = EDGE_LOOP('',(#74198,#74206,#74214,#74220,#74221,#74222,#74223, + #74224)); +#74198 = ORIENTED_EDGE('',*,*,#74199,.T.); +#74199 = EDGE_CURVE('',#73616,#74200,#74202,.T.); +#74200 = VERTEX_POINT('',#74201); +#74201 = CARTESIAN_POINT('',(2.275,-2.76,1.19)); +#74202 = LINE('',#74203,#74204); +#74203 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74204 = VECTOR('',#74205,1.); +#74205 = DIRECTION('',(0.,-1.,2.2E-16)); +#74206 = ORIENTED_EDGE('',*,*,#74207,.T.); +#74207 = EDGE_CURVE('',#74200,#74208,#74210,.T.); +#74208 = VERTEX_POINT('',#74209); +#74209 = CARTESIAN_POINT('',(3.675,-2.76,1.19)); +#74210 = LINE('',#74211,#74212); +#74211 = CARTESIAN_POINT('',(2.275,-2.76,1.19)); +#74212 = VECTOR('',#74213,1.); +#74213 = DIRECTION('',(1.,0.,0.)); +#74214 = ORIENTED_EDGE('',*,*,#74215,.F.); +#74215 = EDGE_CURVE('',#73936,#74208,#74216,.T.); +#74216 = LINE('',#74217,#74218); +#74217 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#74218 = VECTOR('',#74219,1.); +#74219 = DIRECTION('',(0.,-1.,2.2E-16)); +#74220 = ORIENTED_EDGE('',*,*,#73935,.F.); +#74221 = ORIENTED_EDGE('',*,*,#73848,.F.); +#74222 = ORIENTED_EDGE('',*,*,#73779,.F.); +#74223 = ORIENTED_EDGE('',*,*,#73692,.F.); +#74224 = ORIENTED_EDGE('',*,*,#73623,.F.); +#74225 = PLANE('',#74226); +#74226 = AXIS2_PLACEMENT_3D('',#74227,#74228,#74229); +#74227 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74228 = DIRECTION('',(0.,2.2E-16,1.)); +#74229 = DIRECTION('',(1.,0.,-0.)); +#74230 = ADVANCED_FACE('',(#74231),#74242,.F.); +#74231 = FACE_BOUND('',#74232,.F.); +#74232 = EDGE_LOOP('',(#74233,#74239,#74240,#74241)); +#74233 = ORIENTED_EDGE('',*,*,#74234,.F.); +#74234 = EDGE_CURVE('',#73560,#73671,#74235,.T.); +#74235 = LINE('',#74236,#74237); +#74236 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74237 = VECTOR('',#74238,1.); +#74238 = DIRECTION('',(1.,0.,0.)); +#74239 = ORIENTED_EDGE('',*,*,#73559,.T.); +#74240 = ORIENTED_EDGE('',*,*,#73606,.T.); +#74241 = ORIENTED_EDGE('',*,*,#73670,.F.); +#74242 = PLANE('',#74243); +#74243 = AXIS2_PLACEMENT_3D('',#74244,#74245,#74246); +#74244 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74245 = DIRECTION('',(0.,1.,0.)); +#74246 = DIRECTION('',(1.,0.,0.)); +#74247 = ADVANCED_FACE('',(#74248),#74259,.T.); +#74248 = FACE_BOUND('',#74249,.T.); +#74249 = EDGE_LOOP('',(#74250,#74251,#74252,#74253)); +#74250 = ORIENTED_EDGE('',*,*,#73584,.T.); +#74251 = ORIENTED_EDGE('',*,*,#73544,.T.); +#74252 = ORIENTED_EDGE('',*,*,#73489,.F.); +#74253 = ORIENTED_EDGE('',*,*,#74254,.F.); +#74254 = EDGE_CURVE('',#73585,#73490,#74255,.T.); +#74255 = LINE('',#74256,#74257); +#74256 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#74257 = VECTOR('',#74258,1.); +#74258 = DIRECTION('',(-1.,0.,0.)); +#74259 = PLANE('',#74260); +#74260 = AXIS2_PLACEMENT_3D('',#74261,#74262,#74263); +#74261 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#74262 = DIRECTION('',(0.,-1.,0.)); +#74263 = DIRECTION('',(-1.,0.,0.)); +#74264 = ADVANCED_FACE('',(#74265),#74277,.T.); +#74265 = FACE_BOUND('',#74266,.T.); +#74266 = EDGE_LOOP('',(#74267,#74268,#74269,#74270,#74271)); +#74267 = ORIENTED_EDGE('',*,*,#71093,.F.); +#74268 = ORIENTED_EDGE('',*,*,#73507,.T.); +#74269 = ORIENTED_EDGE('',*,*,#73528,.T.); +#74270 = ORIENTED_EDGE('',*,*,#73577,.F.); +#74271 = ORIENTED_EDGE('',*,*,#74272,.T.); +#74272 = EDGE_CURVE('',#73570,#71086,#74273,.T.); +#74273 = LINE('',#74274,#74275); +#74274 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74275 = VECTOR('',#74276,1.); +#74276 = DIRECTION('',(-0.707106781187,1.599999999999E-16, + -0.707106781187)); +#74277 = PLANE('',#74278); +#74278 = AXIS2_PLACEMENT_3D('',#74279,#74280,#74281); +#74279 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#74280 = DIRECTION('',(0.,1.,0.)); +#74281 = DIRECTION('',(1.,0.,0.)); +#74282 = ADVANCED_FACE('',(#74283),#74295,.T.); +#74283 = FACE_BOUND('',#74284,.T.); +#74284 = EDGE_LOOP('',(#74285,#74286,#74292,#74293,#74294)); +#74285 = ORIENTED_EDGE('',*,*,#74199,.T.); +#74286 = ORIENTED_EDGE('',*,*,#74287,.T.); +#74287 = EDGE_CURVE('',#74200,#71078,#74288,.T.); +#74288 = LINE('',#74289,#74290); +#74289 = CARTESIAN_POINT('',(2.275,-2.76,1.19)); +#74290 = VECTOR('',#74291,1.); +#74291 = DIRECTION('',(-0.707106781187,1.599999999999E-16, + -0.707106781187)); +#74292 = ORIENTED_EDGE('',*,*,#71085,.F.); +#74293 = ORIENTED_EDGE('',*,*,#74272,.F.); +#74294 = ORIENTED_EDGE('',*,*,#73615,.F.); +#74295 = PLANE('',#74296); +#74296 = AXIS2_PLACEMENT_3D('',#74297,#74298,#74299); +#74297 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74298 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#74299 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#74300 = ADVANCED_FACE('',(#74301),#74312,.T.); +#74301 = FACE_BOUND('',#74302,.F.); +#74302 = EDGE_LOOP('',(#74303,#74304,#74310,#74311)); +#74303 = ORIENTED_EDGE('',*,*,#71077,.T.); +#74304 = ORIENTED_EDGE('',*,*,#74305,.F.); +#74305 = EDGE_CURVE('',#74208,#71070,#74306,.T.); +#74306 = LINE('',#74307,#74308); +#74307 = CARTESIAN_POINT('',(3.675,-2.76,1.19)); +#74308 = VECTOR('',#74309,1.); +#74309 = DIRECTION('',(0.707106781187,1.599999999999E-16,-0.707106781187 + )); +#74310 = ORIENTED_EDGE('',*,*,#74207,.F.); +#74311 = ORIENTED_EDGE('',*,*,#74287,.T.); +#74312 = PLANE('',#74313); +#74313 = AXIS2_PLACEMENT_3D('',#74314,#74315,#74316); +#74314 = CARTESIAN_POINT('',(2.975,-2.76,0.826809470956)); +#74315 = DIRECTION('',(0.,1.,2.2E-16)); +#74316 = DIRECTION('',(0.,-2.2E-16,1.)); +#74317 = ADVANCED_FACE('',(#74318),#74330,.F.); +#74318 = FACE_BOUND('',#74319,.F.); +#74319 = EDGE_LOOP('',(#74320,#74321,#74322,#74323,#74329)); +#74320 = ORIENTED_EDGE('',*,*,#74215,.T.); +#74321 = ORIENTED_EDGE('',*,*,#74305,.T.); +#74322 = ORIENTED_EDGE('',*,*,#71069,.F.); +#74323 = ORIENTED_EDGE('',*,*,#74324,.F.); +#74324 = EDGE_CURVE('',#73944,#71062,#74325,.T.); +#74325 = LINE('',#74326,#74327); +#74326 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#74327 = VECTOR('',#74328,1.); +#74328 = DIRECTION('',(0.707106781187,1.599999999999E-16,-0.707106781187 + )); +#74329 = ORIENTED_EDGE('',*,*,#73943,.F.); +#74330 = PLANE('',#74331); +#74331 = AXIS2_PLACEMENT_3D('',#74332,#74333,#74334); +#74332 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#74333 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#74334 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#74335 = ADVANCED_FACE('',(#74336),#74343,.T.); +#74336 = FACE_BOUND('',#74337,.T.); +#74337 = EDGE_LOOP('',(#74338,#74339,#74340,#74341,#74342)); +#74338 = ORIENTED_EDGE('',*,*,#71061,.F.); +#74339 = ORIENTED_EDGE('',*,*,#74324,.F.); +#74340 = ORIENTED_EDGE('',*,*,#73983,.T.); +#74341 = ORIENTED_EDGE('',*,*,#74012,.T.); +#74342 = ORIENTED_EDGE('',*,*,#74051,.F.); +#74343 = PLANE('',#74344); +#74344 = AXIS2_PLACEMENT_3D('',#74345,#74346,#74347); +#74345 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#74346 = DIRECTION('',(0.,1.,0.)); +#74347 = DIRECTION('',(1.,0.,0.)); +#74348 = ADVANCED_FACE('',(#74349),#74367,.F.); +#74349 = FACE_BOUND('',#74350,.F.); +#74350 = EDGE_LOOP('',(#74351,#74359,#74360,#74361)); +#74351 = ORIENTED_EDGE('',*,*,#74352,.F.); +#74352 = EDGE_CURVE('',#74044,#74353,#74355,.T.); +#74353 = VERTEX_POINT('',#74354); +#74354 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74355 = LINE('',#74356,#74357); +#74356 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74357 = VECTOR('',#74358,1.); +#74358 = DIRECTION('',(1.,0.,0.)); +#74359 = ORIENTED_EDGE('',*,*,#74043,.T.); +#74360 = ORIENTED_EDGE('',*,*,#71053,.T.); +#74361 = ORIENTED_EDGE('',*,*,#74362,.F.); +#74362 = EDGE_CURVE('',#74353,#71046,#74363,.T.); +#74363 = LINE('',#74364,#74365); +#74364 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74365 = VECTOR('',#74366,1.); +#74366 = DIRECTION('',(0.,0.,1.)); +#74367 = PLANE('',#74368); +#74368 = AXIS2_PLACEMENT_3D('',#74369,#74370,#74371); +#74369 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74370 = DIRECTION('',(0.,1.,0.)); +#74371 = DIRECTION('',(1.,0.,0.)); +#74372 = ADVANCED_FACE('',(#74373),#74406,.T.); +#74373 = FACE_BOUND('',#74374,.T.); +#74374 = EDGE_LOOP('',(#74375,#74385,#74393,#74399,#74400)); +#74375 = ORIENTED_EDGE('',*,*,#74376,.T.); +#74376 = EDGE_CURVE('',#74377,#74379,#74381,.T.); +#74377 = VERTEX_POINT('',#74378); +#74378 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74379 = VERTEX_POINT('',#74380); +#74380 = CARTESIAN_POINT('',(4.95,-1.96,1.59)); +#74381 = LINE('',#74382,#74383); +#74382 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74383 = VECTOR('',#74384,1.); +#74384 = DIRECTION('',(0.,0.,1.)); +#74385 = ORIENTED_EDGE('',*,*,#74386,.T.); +#74386 = EDGE_CURVE('',#74379,#74387,#74389,.T.); +#74387 = VERTEX_POINT('',#74388); +#74388 = CARTESIAN_POINT('',(4.95,-2.26,1.59)); +#74389 = LINE('',#74390,#74391); +#74390 = CARTESIAN_POINT('',(4.95,-1.96,1.59)); +#74391 = VECTOR('',#74392,1.); +#74392 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74393 = ORIENTED_EDGE('',*,*,#74394,.F.); +#74394 = EDGE_CURVE('',#71046,#74387,#74395,.T.); +#74395 = LINE('',#74396,#74397); +#74396 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74397 = VECTOR('',#74398,1.); +#74398 = DIRECTION('',(0.,0.,1.)); +#74399 = ORIENTED_EDGE('',*,*,#74362,.F.); +#74400 = ORIENTED_EDGE('',*,*,#74401,.F.); +#74401 = EDGE_CURVE('',#74377,#74353,#74402,.T.); +#74402 = LINE('',#74403,#74404); +#74403 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74404 = VECTOR('',#74405,1.); +#74405 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74406 = PLANE('',#74407); +#74407 = AXIS2_PLACEMENT_3D('',#74408,#74409,#74410); +#74408 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74409 = DIRECTION('',(1.,0.,0.)); +#74410 = DIRECTION('',(0.,-1.,0.)); +#74411 = ADVANCED_FACE('',(#74412),#74437,.F.); +#74412 = FACE_BOUND('',#74413,.F.); +#74413 = EDGE_LOOP('',(#74414,#74422,#74430,#74436)); +#74414 = ORIENTED_EDGE('',*,*,#74415,.T.); +#74415 = EDGE_CURVE('',#74387,#74416,#74418,.T.); +#74416 = VERTEX_POINT('',#74417); +#74417 = CARTESIAN_POINT('',(5.25,-2.26,1.59)); +#74418 = LINE('',#74419,#74420); +#74419 = CARTESIAN_POINT('',(4.95,-2.26,1.59)); +#74420 = VECTOR('',#74421,1.); +#74421 = DIRECTION('',(1.,0.,0.)); +#74422 = ORIENTED_EDGE('',*,*,#74423,.T.); +#74423 = EDGE_CURVE('',#74416,#74424,#74426,.T.); +#74424 = VERTEX_POINT('',#74425); +#74425 = CARTESIAN_POINT('',(5.25,-1.96,1.59)); +#74426 = LINE('',#74427,#74428); +#74427 = CARTESIAN_POINT('',(5.25,-2.26,1.59)); +#74428 = VECTOR('',#74429,1.); +#74429 = DIRECTION('',(0.,1.,2.2E-16)); +#74430 = ORIENTED_EDGE('',*,*,#74431,.T.); +#74431 = EDGE_CURVE('',#74424,#74379,#74432,.T.); +#74432 = LINE('',#74433,#74434); +#74433 = CARTESIAN_POINT('',(5.25,-1.96,1.59)); +#74434 = VECTOR('',#74435,1.); +#74435 = DIRECTION('',(-1.,0.,0.)); +#74436 = ORIENTED_EDGE('',*,*,#74386,.T.); +#74437 = PLANE('',#74438); +#74438 = AXIS2_PLACEMENT_3D('',#74439,#74440,#74441); +#74439 = CARTESIAN_POINT('',(5.1,-2.11,1.59)); +#74440 = DIRECTION('',(0.,-2.2E-16,1.)); +#74441 = DIRECTION('',(1.,0.,0.)); +#74442 = ADVANCED_FACE('',(#74443),#74474,.T.); +#74443 = FACE_BOUND('',#74444,.T.); +#74444 = EDGE_LOOP('',(#74445,#74453,#74459,#74460,#74468)); +#74445 = ORIENTED_EDGE('',*,*,#74446,.T.); +#74446 = EDGE_CURVE('',#74447,#71038,#74449,.T.); +#74447 = VERTEX_POINT('',#74448); +#74448 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74449 = LINE('',#74450,#74451); +#74450 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74451 = VECTOR('',#74452,1.); +#74452 = DIRECTION('',(0.,0.,1.)); +#74453 = ORIENTED_EDGE('',*,*,#74454,.T.); +#74454 = EDGE_CURVE('',#71038,#74416,#74455,.T.); +#74455 = LINE('',#74456,#74457); +#74456 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74457 = VECTOR('',#74458,1.); +#74458 = DIRECTION('',(0.,0.,1.)); +#74459 = ORIENTED_EDGE('',*,*,#74423,.T.); +#74460 = ORIENTED_EDGE('',*,*,#74461,.F.); +#74461 = EDGE_CURVE('',#74462,#74424,#74464,.T.); +#74462 = VERTEX_POINT('',#74463); +#74463 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74464 = LINE('',#74465,#74466); +#74465 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74466 = VECTOR('',#74467,1.); +#74467 = DIRECTION('',(0.,0.,1.)); +#74468 = ORIENTED_EDGE('',*,*,#74469,.F.); +#74469 = EDGE_CURVE('',#74447,#74462,#74470,.T.); +#74470 = LINE('',#74471,#74472); +#74471 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74472 = VECTOR('',#74473,1.); +#74473 = DIRECTION('',(0.,1.,2.2E-16)); +#74474 = PLANE('',#74475); +#74475 = AXIS2_PLACEMENT_3D('',#74476,#74477,#74478); +#74476 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74477 = DIRECTION('',(-1.,0.,0.)); +#74478 = DIRECTION('',(0.,1.,0.)); +#74479 = ADVANCED_FACE('',(#74480),#74491,.T.); +#74480 = FACE_BOUND('',#74481,.T.); +#74481 = EDGE_LOOP('',(#74482,#74483,#74484,#74485)); +#74482 = ORIENTED_EDGE('',*,*,#74461,.T.); +#74483 = ORIENTED_EDGE('',*,*,#74431,.T.); +#74484 = ORIENTED_EDGE('',*,*,#74376,.F.); +#74485 = ORIENTED_EDGE('',*,*,#74486,.F.); +#74486 = EDGE_CURVE('',#74462,#74377,#74487,.T.); +#74487 = LINE('',#74488,#74489); +#74488 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74489 = VECTOR('',#74490,1.); +#74490 = DIRECTION('',(-1.,0.,0.)); +#74491 = PLANE('',#74492); +#74492 = AXIS2_PLACEMENT_3D('',#74493,#74494,#74495); +#74493 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74494 = DIRECTION('',(0.,-1.,0.)); +#74495 = DIRECTION('',(-1.,0.,0.)); +#74496 = ADVANCED_FACE('',(#74497),#74503,.T.); +#74497 = FACE_BOUND('',#74498,.T.); +#74498 = EDGE_LOOP('',(#74499,#74500,#74501,#74502)); +#74499 = ORIENTED_EDGE('',*,*,#71045,.F.); +#74500 = ORIENTED_EDGE('',*,*,#74394,.T.); +#74501 = ORIENTED_EDGE('',*,*,#74415,.T.); +#74502 = ORIENTED_EDGE('',*,*,#74454,.F.); +#74503 = PLANE('',#74504); +#74504 = AXIS2_PLACEMENT_3D('',#74505,#74506,#74507); +#74505 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74506 = DIRECTION('',(0.,1.,0.)); +#74507 = DIRECTION('',(1.,0.,0.)); +#74508 = ADVANCED_FACE('',(#74509),#74527,.F.); +#74509 = FACE_BOUND('',#74510,.F.); +#74510 = EDGE_LOOP('',(#74511,#74519,#74520,#74521)); +#74511 = ORIENTED_EDGE('',*,*,#74512,.F.); +#74512 = EDGE_CURVE('',#74447,#74513,#74515,.T.); +#74513 = VERTEX_POINT('',#74514); +#74514 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74515 = LINE('',#74516,#74517); +#74516 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74517 = VECTOR('',#74518,1.); +#74518 = DIRECTION('',(1.,0.,0.)); +#74519 = ORIENTED_EDGE('',*,*,#74446,.T.); +#74520 = ORIENTED_EDGE('',*,*,#71037,.T.); +#74521 = ORIENTED_EDGE('',*,*,#74522,.F.); +#74522 = EDGE_CURVE('',#74513,#71030,#74523,.T.); +#74523 = LINE('',#74524,#74525); +#74524 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74525 = VECTOR('',#74526,1.); +#74526 = DIRECTION('',(0.,0.,1.)); +#74527 = PLANE('',#74528); +#74528 = AXIS2_PLACEMENT_3D('',#74529,#74530,#74531); +#74529 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74530 = DIRECTION('',(0.,1.,0.)); +#74531 = DIRECTION('',(1.,0.,0.)); +#74532 = ADVANCED_FACE('',(#74533),#74566,.T.); +#74533 = FACE_BOUND('',#74534,.T.); +#74534 = EDGE_LOOP('',(#74535,#74545,#74553,#74559,#74560)); +#74535 = ORIENTED_EDGE('',*,*,#74536,.T.); +#74536 = EDGE_CURVE('',#74537,#74539,#74541,.T.); +#74537 = VERTEX_POINT('',#74538); +#74538 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74539 = VERTEX_POINT('',#74540); +#74540 = CARTESIAN_POINT('',(5.8,-1.96,1.59)); +#74541 = LINE('',#74542,#74543); +#74542 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74543 = VECTOR('',#74544,1.); +#74544 = DIRECTION('',(0.,0.,1.)); +#74545 = ORIENTED_EDGE('',*,*,#74546,.T.); +#74546 = EDGE_CURVE('',#74539,#74547,#74549,.T.); +#74547 = VERTEX_POINT('',#74548); +#74548 = CARTESIAN_POINT('',(5.8,-2.26,1.59)); +#74549 = LINE('',#74550,#74551); +#74550 = CARTESIAN_POINT('',(5.8,-1.96,1.59)); +#74551 = VECTOR('',#74552,1.); +#74552 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74553 = ORIENTED_EDGE('',*,*,#74554,.F.); +#74554 = EDGE_CURVE('',#71030,#74547,#74555,.T.); +#74555 = LINE('',#74556,#74557); +#74556 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74557 = VECTOR('',#74558,1.); +#74558 = DIRECTION('',(0.,0.,1.)); +#74559 = ORIENTED_EDGE('',*,*,#74522,.F.); +#74560 = ORIENTED_EDGE('',*,*,#74561,.F.); +#74561 = EDGE_CURVE('',#74537,#74513,#74562,.T.); +#74562 = LINE('',#74563,#74564); +#74563 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74564 = VECTOR('',#74565,1.); +#74565 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74566 = PLANE('',#74567); +#74567 = AXIS2_PLACEMENT_3D('',#74568,#74569,#74570); +#74568 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74569 = DIRECTION('',(1.,0.,0.)); +#74570 = DIRECTION('',(0.,-1.,0.)); +#74571 = ADVANCED_FACE('',(#74572),#74597,.F.); +#74572 = FACE_BOUND('',#74573,.F.); +#74573 = EDGE_LOOP('',(#74574,#74582,#74590,#74596)); +#74574 = ORIENTED_EDGE('',*,*,#74575,.T.); +#74575 = EDGE_CURVE('',#74547,#74576,#74578,.T.); +#74576 = VERTEX_POINT('',#74577); +#74577 = CARTESIAN_POINT('',(6.1,-2.26,1.59)); +#74578 = LINE('',#74579,#74580); +#74579 = CARTESIAN_POINT('',(5.8,-2.26,1.59)); +#74580 = VECTOR('',#74581,1.); +#74581 = DIRECTION('',(1.,0.,0.)); +#74582 = ORIENTED_EDGE('',*,*,#74583,.T.); +#74583 = EDGE_CURVE('',#74576,#74584,#74586,.T.); +#74584 = VERTEX_POINT('',#74585); +#74585 = CARTESIAN_POINT('',(6.1,-1.96,1.59)); +#74586 = LINE('',#74587,#74588); +#74587 = CARTESIAN_POINT('',(6.1,-2.26,1.59)); +#74588 = VECTOR('',#74589,1.); +#74589 = DIRECTION('',(0.,1.,2.2E-16)); +#74590 = ORIENTED_EDGE('',*,*,#74591,.T.); +#74591 = EDGE_CURVE('',#74584,#74539,#74592,.T.); +#74592 = LINE('',#74593,#74594); +#74593 = CARTESIAN_POINT('',(6.1,-1.96,1.59)); +#74594 = VECTOR('',#74595,1.); +#74595 = DIRECTION('',(-1.,0.,0.)); +#74596 = ORIENTED_EDGE('',*,*,#74546,.T.); +#74597 = PLANE('',#74598); +#74598 = AXIS2_PLACEMENT_3D('',#74599,#74600,#74601); +#74599 = CARTESIAN_POINT('',(5.95,-2.11,1.59)); +#74600 = DIRECTION('',(0.,-2.2E-16,1.)); +#74601 = DIRECTION('',(1.,0.,0.)); +#74602 = ADVANCED_FACE('',(#74603),#74634,.T.); +#74603 = FACE_BOUND('',#74604,.T.); +#74604 = EDGE_LOOP('',(#74605,#74613,#74619,#74620,#74628)); +#74605 = ORIENTED_EDGE('',*,*,#74606,.T.); +#74606 = EDGE_CURVE('',#74607,#71022,#74609,.T.); +#74607 = VERTEX_POINT('',#74608); +#74608 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74609 = LINE('',#74610,#74611); +#74610 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74611 = VECTOR('',#74612,1.); +#74612 = DIRECTION('',(0.,0.,1.)); +#74613 = ORIENTED_EDGE('',*,*,#74614,.T.); +#74614 = EDGE_CURVE('',#71022,#74576,#74615,.T.); +#74615 = LINE('',#74616,#74617); +#74616 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74617 = VECTOR('',#74618,1.); +#74618 = DIRECTION('',(0.,0.,1.)); +#74619 = ORIENTED_EDGE('',*,*,#74583,.T.); +#74620 = ORIENTED_EDGE('',*,*,#74621,.F.); +#74621 = EDGE_CURVE('',#74622,#74584,#74624,.T.); +#74622 = VERTEX_POINT('',#74623); +#74623 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74624 = LINE('',#74625,#74626); +#74625 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74626 = VECTOR('',#74627,1.); +#74627 = DIRECTION('',(0.,0.,1.)); +#74628 = ORIENTED_EDGE('',*,*,#74629,.F.); +#74629 = EDGE_CURVE('',#74607,#74622,#74630,.T.); +#74630 = LINE('',#74631,#74632); +#74631 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74632 = VECTOR('',#74633,1.); +#74633 = DIRECTION('',(0.,1.,2.2E-16)); +#74634 = PLANE('',#74635); +#74635 = AXIS2_PLACEMENT_3D('',#74636,#74637,#74638); +#74636 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74637 = DIRECTION('',(-1.,0.,0.)); +#74638 = DIRECTION('',(0.,1.,0.)); +#74639 = ADVANCED_FACE('',(#74640),#74651,.T.); +#74640 = FACE_BOUND('',#74641,.T.); +#74641 = EDGE_LOOP('',(#74642,#74643,#74644,#74645)); +#74642 = ORIENTED_EDGE('',*,*,#74621,.T.); +#74643 = ORIENTED_EDGE('',*,*,#74591,.T.); +#74644 = ORIENTED_EDGE('',*,*,#74536,.F.); +#74645 = ORIENTED_EDGE('',*,*,#74646,.F.); +#74646 = EDGE_CURVE('',#74622,#74537,#74647,.T.); +#74647 = LINE('',#74648,#74649); +#74648 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74649 = VECTOR('',#74650,1.); +#74650 = DIRECTION('',(-1.,0.,0.)); +#74651 = PLANE('',#74652); +#74652 = AXIS2_PLACEMENT_3D('',#74653,#74654,#74655); +#74653 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74654 = DIRECTION('',(0.,-1.,0.)); +#74655 = DIRECTION('',(-1.,0.,0.)); +#74656 = ADVANCED_FACE('',(#74657),#74663,.T.); +#74657 = FACE_BOUND('',#74658,.T.); +#74658 = EDGE_LOOP('',(#74659,#74660,#74661,#74662)); +#74659 = ORIENTED_EDGE('',*,*,#71029,.F.); +#74660 = ORIENTED_EDGE('',*,*,#74554,.T.); +#74661 = ORIENTED_EDGE('',*,*,#74575,.T.); +#74662 = ORIENTED_EDGE('',*,*,#74614,.F.); +#74663 = PLANE('',#74664); +#74664 = AXIS2_PLACEMENT_3D('',#74665,#74666,#74667); +#74665 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74666 = DIRECTION('',(0.,1.,0.)); +#74667 = DIRECTION('',(1.,0.,0.)); +#74668 = ADVANCED_FACE('',(#74669),#74680,.T.); +#74669 = FACE_BOUND('',#74670,.F.); +#74670 = EDGE_LOOP('',(#74671,#74677,#74678,#74679)); +#74671 = ORIENTED_EDGE('',*,*,#74672,.F.); +#74672 = EDGE_CURVE('',#70982,#71582,#74673,.T.); +#74673 = LINE('',#74674,#74675); +#74674 = CARTESIAN_POINT('',(6.145,-3.93,0.59)); +#74675 = VECTOR('',#74676,1.); +#74676 = DIRECTION('',(-1.999999999999E-16,-0.707106781187, + 0.707106781187)); +#74677 = ORIENTED_EDGE('',*,*,#71014,.T.); +#74678 = ORIENTED_EDGE('',*,*,#72961,.T.); +#74679 = ORIENTED_EDGE('',*,*,#71590,.F.); +#74680 = PLANE('',#74681); +#74681 = AXIS2_PLACEMENT_3D('',#74682,#74683,#74684); +#74682 = CARTESIAN_POINT('',(6.145,-3.995,0.655)); +#74683 = DIRECTION('',(-0.,-0.707106781187,-0.707106781187)); +#74684 = DIRECTION('',(1.,-0.,0.)); +#74685 = ADVANCED_FACE('',(#74686),#74694,.T.); +#74686 = FACE_BOUND('',#74687,.T.); +#74687 = EDGE_LOOP('',(#74688,#74689,#74690,#74691,#74692,#74693)); +#74688 = ORIENTED_EDGE('',*,*,#71165,.T.); +#74689 = ORIENTED_EDGE('',*,*,#71004,.T.); +#74690 = ORIENTED_EDGE('',*,*,#72954,.T.); +#74691 = ORIENTED_EDGE('',*,*,#71438,.F.); +#74692 = ORIENTED_EDGE('',*,*,#71408,.T.); +#74693 = ORIENTED_EDGE('',*,*,#71320,.F.); +#74694 = CYLINDRICAL_SURFACE('',#74695,1.); +#74695 = AXIS2_PLACEMENT_3D('',#74696,#74697,#74698); +#74696 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#74697 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74698 = DIRECTION('',(-1.,-0.,0.)); +#74699 = ADVANCED_FACE('',(#74700),#74706,.T.); +#74700 = FACE_BOUND('',#74701,.T.); +#74701 = EDGE_LOOP('',(#74702,#74703,#74704,#74705)); +#74702 = ORIENTED_EDGE('',*,*,#71581,.T.); +#74703 = ORIENTED_EDGE('',*,*,#74672,.F.); +#74704 = ORIENTED_EDGE('',*,*,#70981,.F.); +#74705 = ORIENTED_EDGE('',*,*,#71635,.T.); +#74706 = CONICAL_SURFACE('',#74707,1.,0.785398163397); +#74707 = AXIS2_PLACEMENT_3D('',#74708,#74709,#74710); +#74708 = CARTESIAN_POINT('',(6.145,-3.93,1.59)); +#74709 = DIRECTION('',(0.,1.,3.5E-16)); +#74710 = DIRECTION('',(1.,-7.7E-32,2.2E-16)); +#74711 = ADVANCED_FACE('',(#74712),#74731,.F.); +#74712 = FACE_BOUND('',#74713,.F.); +#74713 = EDGE_LOOP('',(#74714,#74722,#74723,#74724,#74725)); +#74714 = ORIENTED_EDGE('',*,*,#74715,.F.); +#74715 = EDGE_CURVE('',#74607,#74716,#74718,.T.); +#74716 = VERTEX_POINT('',#74717); +#74717 = CARTESIAN_POINT('',(7.,-2.26,0.19)); +#74718 = LINE('',#74719,#74720); +#74719 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74720 = VECTOR('',#74721,1.); +#74721 = DIRECTION('',(1.,0.,0.)); +#74722 = ORIENTED_EDGE('',*,*,#74606,.T.); +#74723 = ORIENTED_EDGE('',*,*,#71021,.T.); +#74724 = ORIENTED_EDGE('',*,*,#70954,.T.); +#74725 = ORIENTED_EDGE('',*,*,#74726,.F.); +#74726 = EDGE_CURVE('',#74716,#70957,#74727,.T.); +#74727 = LINE('',#74728,#74729); +#74728 = CARTESIAN_POINT('',(7.,-2.26,0.19)); +#74729 = VECTOR('',#74730,1.); +#74730 = DIRECTION('',(0.,0.,1.)); +#74731 = PLANE('',#74732); +#74732 = AXIS2_PLACEMENT_3D('',#74733,#74734,#74735); +#74733 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74734 = DIRECTION('',(0.,1.,0.)); +#74735 = DIRECTION('',(1.,0.,0.)); +#74736 = ADVANCED_FACE('',(#74737),#74743,.T.); +#74737 = FACE_BOUND('',#74738,.T.); +#74738 = EDGE_LOOP('',(#74739,#74740,#74741,#74742)); +#74739 = ORIENTED_EDGE('',*,*,#71676,.T.); +#74740 = ORIENTED_EDGE('',*,*,#71629,.T.); +#74741 = ORIENTED_EDGE('',*,*,#70973,.F.); +#74742 = ORIENTED_EDGE('',*,*,#70932,.F.); +#74743 = PLANE('',#74744); +#74744 = AXIS2_PLACEMENT_3D('',#74745,#74746,#74747); +#74745 = CARTESIAN_POINT('',(7.145,-2.26,3.15)); +#74746 = DIRECTION('',(1.,0.,0.)); +#74747 = DIRECTION('',(0.,2.2E-16,-1.)); +#74748 = ADVANCED_FACE('',(#74749),#74763,.T.); +#74749 = FACE_BOUND('',#74750,.T.); +#74750 = EDGE_LOOP('',(#74751,#74758,#74759,#74760,#74761,#74762)); +#74751 = ORIENTED_EDGE('',*,*,#74752,.T.); +#74752 = EDGE_CURVE('',#70917,#71803,#74753,.T.); +#74753 = CIRCLE('',#74754,1.); +#74754 = AXIS2_PLACEMENT_3D('',#74755,#74756,#74757); +#74755 = CARTESIAN_POINT('',(6.145,0.56,2.15)); +#74756 = DIRECTION('',(0.,-1.,0.)); +#74757 = DIRECTION('',(0.,0.,-1.)); +#74758 = ORIENTED_EDGE('',*,*,#71817,.T.); +#74759 = ORIENTED_EDGE('',*,*,#71785,.T.); +#74760 = ORIENTED_EDGE('',*,*,#71753,.T.); +#74761 = ORIENTED_EDGE('',*,*,#71832,.F.); +#74762 = ORIENTED_EDGE('',*,*,#70924,.F.); +#74763 = CYLINDRICAL_SURFACE('',#74764,1.); +#74764 = AXIS2_PLACEMENT_3D('',#74765,#74766,#74767); +#74765 = CARTESIAN_POINT('',(6.145,-0.44,2.15)); +#74766 = DIRECTION('',(0.,-1.,0.)); +#74767 = DIRECTION('',(1.,0.,0.)); +#74768 = ADVANCED_FACE('',(#74769),#74809,.T.); +#74769 = FACE_BOUND('',#74770,.T.); +#74770 = EDGE_LOOP('',(#74771,#74779,#74787,#74795,#74801,#74802,#74803, + #74804,#74805,#74806,#74807,#74808)); +#74771 = ORIENTED_EDGE('',*,*,#74772,.F.); +#74772 = EDGE_CURVE('',#74773,#70909,#74775,.T.); +#74773 = VERTEX_POINT('',#74774); +#74774 = CARTESIAN_POINT('',(7.145,0.56,1.285)); +#74775 = LINE('',#74776,#74777); +#74776 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#74777 = VECTOR('',#74778,1.); +#74778 = DIRECTION('',(0.,0.,1.)); +#74779 = ORIENTED_EDGE('',*,*,#74780,.F.); +#74780 = EDGE_CURVE('',#74781,#74773,#74783,.T.); +#74781 = VERTEX_POINT('',#74782); +#74782 = CARTESIAN_POINT('',(6.145,0.56,1.285)); +#74783 = LINE('',#74784,#74785); +#74784 = CARTESIAN_POINT('',(6.145,0.56,1.285)); +#74785 = VECTOR('',#74786,1.); +#74786 = DIRECTION('',(1.,0.,0.)); +#74787 = ORIENTED_EDGE('',*,*,#74788,.F.); +#74788 = EDGE_CURVE('',#74789,#74781,#74791,.T.); +#74789 = VERTEX_POINT('',#74790); +#74790 = CARTESIAN_POINT('',(6.145,0.56,0.19)); +#74791 = LINE('',#74792,#74793); +#74792 = CARTESIAN_POINT('',(6.145,0.56,-1.E-02)); +#74793 = VECTOR('',#74794,1.); +#74794 = DIRECTION('',(0.,0.,1.)); +#74795 = ORIENTED_EDGE('',*,*,#74796,.F.); +#74796 = EDGE_CURVE('',#73200,#74789,#74797,.T.); +#74797 = LINE('',#74798,#74799); +#74798 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#74799 = VECTOR('',#74800,1.); +#74800 = DIRECTION('',(1.,0.,0.)); +#74801 = ORIENTED_EDGE('',*,*,#73207,.T.); +#74802 = ORIENTED_EDGE('',*,*,#73150,.T.); +#74803 = ORIENTED_EDGE('',*,*,#73100,.T.); +#74804 = ORIENTED_EDGE('',*,*,#71384,.T.); +#74805 = ORIENTED_EDGE('',*,*,#73014,.T.); +#74806 = ORIENTED_EDGE('',*,*,#71800,.T.); +#74807 = ORIENTED_EDGE('',*,*,#74752,.F.); +#74808 = ORIENTED_EDGE('',*,*,#70916,.F.); +#74809 = PLANE('',#74810); +#74810 = AXIS2_PLACEMENT_3D('',#74811,#74812,#74813); +#74811 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#74812 = DIRECTION('',(0.,1.,0.)); +#74813 = DIRECTION('',(1.,0.,0.)); +#74814 = ADVANCED_FACE('',(#74815),#74840,.T.); +#74815 = FACE_BOUND('',#74816,.T.); +#74816 = EDGE_LOOP('',(#74817,#74825,#74826,#74834)); +#74817 = ORIENTED_EDGE('',*,*,#74818,.T.); +#74818 = EDGE_CURVE('',#74819,#74789,#74821,.T.); +#74819 = VERTEX_POINT('',#74820); +#74820 = CARTESIAN_POINT('',(6.145,0.2,0.19)); +#74821 = LINE('',#74822,#74823); +#74822 = CARTESIAN_POINT('',(6.145,-0.145,0.19)); +#74823 = VECTOR('',#74824,1.); +#74824 = DIRECTION('',(0.,1.,0.)); +#74825 = ORIENTED_EDGE('',*,*,#74788,.T.); +#74826 = ORIENTED_EDGE('',*,*,#74827,.T.); +#74827 = EDGE_CURVE('',#74781,#74828,#74830,.T.); +#74828 = VERTEX_POINT('',#74829); +#74829 = CARTESIAN_POINT('',(6.145,0.2,1.285)); +#74830 = LINE('',#74831,#74832); +#74831 = CARTESIAN_POINT('',(6.145,0.56,1.285)); +#74832 = VECTOR('',#74833,1.); +#74833 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74834 = ORIENTED_EDGE('',*,*,#74835,.F.); +#74835 = EDGE_CURVE('',#74819,#74828,#74836,.T.); +#74836 = LINE('',#74837,#74838); +#74837 = CARTESIAN_POINT('',(6.145,0.2,-1.E-02)); +#74838 = VECTOR('',#74839,1.); +#74839 = DIRECTION('',(0.,0.,1.)); +#74840 = PLANE('',#74841); +#74841 = AXIS2_PLACEMENT_3D('',#74842,#74843,#74844); +#74842 = CARTESIAN_POINT('',(6.145,0.56,-1.E-02)); +#74843 = DIRECTION('',(1.,0.,0.)); +#74844 = DIRECTION('',(0.,-1.,0.)); +#74845 = ADVANCED_FACE('',(#74846),#74871,.T.); +#74846 = FACE_BOUND('',#74847,.T.); +#74847 = EDGE_LOOP('',(#74848,#74856,#74857,#74865)); +#74848 = ORIENTED_EDGE('',*,*,#74849,.T.); +#74849 = EDGE_CURVE('',#74850,#74819,#74852,.T.); +#74850 = VERTEX_POINT('',#74851); +#74851 = CARTESIAN_POINT('',(6.245,0.1,0.19)); +#74852 = LINE('',#74853,#74854); +#74853 = CARTESIAN_POINT('',(5.615,0.73,0.19)); +#74854 = VECTOR('',#74855,1.); +#74855 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#74856 = ORIENTED_EDGE('',*,*,#74835,.T.); +#74857 = ORIENTED_EDGE('',*,*,#74858,.T.); +#74858 = EDGE_CURVE('',#74828,#74859,#74861,.T.); +#74859 = VERTEX_POINT('',#74860); +#74860 = CARTESIAN_POINT('',(6.245,0.1,1.285)); +#74861 = LINE('',#74862,#74863); +#74862 = CARTESIAN_POINT('',(6.145,0.2,1.285)); +#74863 = VECTOR('',#74864,1.); +#74864 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#74865 = ORIENTED_EDGE('',*,*,#74866,.F.); +#74866 = EDGE_CURVE('',#74850,#74859,#74867,.T.); +#74867 = LINE('',#74868,#74869); +#74868 = CARTESIAN_POINT('',(6.245,0.1,-1.E-02)); +#74869 = VECTOR('',#74870,1.); +#74870 = DIRECTION('',(0.,0.,1.)); +#74871 = PLANE('',#74872); +#74872 = AXIS2_PLACEMENT_3D('',#74873,#74874,#74875); +#74873 = CARTESIAN_POINT('',(6.145,0.2,-1.E-02)); +#74874 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#74875 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#74876 = ADVANCED_FACE('',(#74877),#74902,.T.); +#74877 = FACE_BOUND('',#74878,.T.); +#74878 = EDGE_LOOP('',(#74879,#74887,#74888,#74896)); +#74879 = ORIENTED_EDGE('',*,*,#74880,.T.); +#74880 = EDGE_CURVE('',#74881,#74850,#74883,.T.); +#74881 = VERTEX_POINT('',#74882); +#74882 = CARTESIAN_POINT('',(6.945,0.1,0.19)); +#74883 = LINE('',#74884,#74885); +#74884 = CARTESIAN_POINT('',(4.61,0.1,0.19)); +#74885 = VECTOR('',#74886,1.); +#74886 = DIRECTION('',(-1.,0.,0.)); +#74887 = ORIENTED_EDGE('',*,*,#74866,.T.); +#74888 = ORIENTED_EDGE('',*,*,#74889,.T.); +#74889 = EDGE_CURVE('',#74859,#74890,#74892,.T.); +#74890 = VERTEX_POINT('',#74891); +#74891 = CARTESIAN_POINT('',(6.945,0.1,1.285)); +#74892 = LINE('',#74893,#74894); +#74893 = CARTESIAN_POINT('',(6.245,0.1,1.285)); +#74894 = VECTOR('',#74895,1.); +#74895 = DIRECTION('',(1.,0.,0.)); +#74896 = ORIENTED_EDGE('',*,*,#74897,.F.); +#74897 = EDGE_CURVE('',#74881,#74890,#74898,.T.); +#74898 = LINE('',#74899,#74900); +#74899 = CARTESIAN_POINT('',(6.945,0.1,-1.E-02)); +#74900 = VECTOR('',#74901,1.); +#74901 = DIRECTION('',(0.,0.,1.)); +#74902 = PLANE('',#74903); +#74903 = AXIS2_PLACEMENT_3D('',#74904,#74905,#74906); +#74904 = CARTESIAN_POINT('',(6.245,0.1,-1.E-02)); +#74905 = DIRECTION('',(0.,1.,0.)); +#74906 = DIRECTION('',(1.,0.,0.)); +#74907 = ADVANCED_FACE('',(#74908),#74926,.F.); +#74908 = FACE_BOUND('',#74909,.T.); +#74909 = EDGE_LOOP('',(#74910,#74911,#74917,#74923,#74924,#74925)); +#74910 = ORIENTED_EDGE('',*,*,#74780,.T.); +#74911 = ORIENTED_EDGE('',*,*,#74912,.T.); +#74912 = EDGE_CURVE('',#74773,#70885,#74913,.T.); +#74913 = LINE('',#74914,#74915); +#74914 = CARTESIAN_POINT('',(7.145,0.56,1.285)); +#74915 = VECTOR('',#74916,1.); +#74916 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74917 = ORIENTED_EDGE('',*,*,#74918,.F.); +#74918 = EDGE_CURVE('',#74890,#70885,#74919,.T.); +#74919 = LINE('',#74920,#74921); +#74920 = CARTESIAN_POINT('',(6.945,0.1,1.285)); +#74921 = VECTOR('',#74922,1.); +#74922 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#74923 = ORIENTED_EDGE('',*,*,#74889,.F.); +#74924 = ORIENTED_EDGE('',*,*,#74858,.F.); +#74925 = ORIENTED_EDGE('',*,*,#74827,.F.); +#74926 = PLANE('',#74927); +#74927 = AXIS2_PLACEMENT_3D('',#74928,#74929,#74930); +#74928 = CARTESIAN_POINT('',(6.697316685586,0.29889766982,1.285)); +#74929 = DIRECTION('',(0.,-2.2E-16,1.)); +#74930 = DIRECTION('',(1.,0.,0.)); +#74931 = ADVANCED_FACE('',(#74932),#74957,.F.); +#74932 = FACE_BOUND('',#74933,.F.); +#74933 = EDGE_LOOP('',(#74934,#74935,#74943,#74951)); +#74934 = ORIENTED_EDGE('',*,*,#74772,.F.); +#74935 = ORIENTED_EDGE('',*,*,#74936,.T.); +#74936 = EDGE_CURVE('',#74773,#74937,#74939,.T.); +#74937 = VERTEX_POINT('',#74938); +#74938 = CARTESIAN_POINT('',(7.445,0.56,1.285)); +#74939 = LINE('',#74940,#74941); +#74940 = CARTESIAN_POINT('',(7.145,0.56,1.285)); +#74941 = VECTOR('',#74942,1.); +#74942 = DIRECTION('',(1.,0.,0.)); +#74943 = ORIENTED_EDGE('',*,*,#74944,.F.); +#74944 = EDGE_CURVE('',#74945,#74937,#74947,.T.); +#74945 = VERTEX_POINT('',#74946); +#74946 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74947 = LINE('',#74948,#74949); +#74948 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74949 = VECTOR('',#74950,1.); +#74950 = DIRECTION('',(0.,0.,-1.)); +#74951 = ORIENTED_EDGE('',*,*,#74952,.F.); +#74952 = EDGE_CURVE('',#70909,#74945,#74953,.T.); +#74953 = LINE('',#74954,#74955); +#74954 = CARTESIAN_POINT('',(7.145,0.56,1.87)); +#74955 = VECTOR('',#74956,1.); +#74956 = DIRECTION('',(1.,0.,0.)); +#74957 = PLANE('',#74958); +#74958 = AXIS2_PLACEMENT_3D('',#74959,#74960,#74961); +#74959 = CARTESIAN_POINT('',(7.145,0.56,1.87)); +#74960 = DIRECTION('',(0.,-1.,0.)); +#74961 = DIRECTION('',(1.,0.,0.)); +#74962 = ADVANCED_FACE('',(#74963),#74988,.F.); +#74963 = FACE_BOUND('',#74964,.F.); +#74964 = EDGE_LOOP('',(#74965,#74966,#74974,#74982)); +#74965 = ORIENTED_EDGE('',*,*,#74944,.T.); +#74966 = ORIENTED_EDGE('',*,*,#74967,.T.); +#74967 = EDGE_CURVE('',#74937,#74968,#74970,.T.); +#74968 = VERTEX_POINT('',#74969); +#74969 = CARTESIAN_POINT('',(7.445,-0.63,1.285)); +#74970 = LINE('',#74971,#74972); +#74971 = CARTESIAN_POINT('',(7.445,0.56,1.285)); +#74972 = VECTOR('',#74973,1.); +#74973 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74974 = ORIENTED_EDGE('',*,*,#74975,.F.); +#74975 = EDGE_CURVE('',#74976,#74968,#74978,.T.); +#74976 = VERTEX_POINT('',#74977); +#74977 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#74978 = LINE('',#74979,#74980); +#74979 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#74980 = VECTOR('',#74981,1.); +#74981 = DIRECTION('',(0.,0.,-1.)); +#74982 = ORIENTED_EDGE('',*,*,#74983,.F.); +#74983 = EDGE_CURVE('',#74945,#74976,#74984,.T.); +#74984 = LINE('',#74985,#74986); +#74985 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74986 = VECTOR('',#74987,1.); +#74987 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74988 = PLANE('',#74989); +#74989 = AXIS2_PLACEMENT_3D('',#74990,#74991,#74992); +#74990 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74991 = DIRECTION('',(-1.,0.,0.)); +#74992 = DIRECTION('',(0.,-1.,0.)); +#74993 = ADVANCED_FACE('',(#74994),#75005,.T.); +#74994 = FACE_BOUND('',#74995,.F.); +#74995 = EDGE_LOOP('',(#74996,#74997,#74998,#75004)); +#74996 = ORIENTED_EDGE('',*,*,#74952,.T.); +#74997 = ORIENTED_EDGE('',*,*,#74983,.T.); +#74998 = ORIENTED_EDGE('',*,*,#74999,.T.); +#74999 = EDGE_CURVE('',#74976,#70901,#75000,.T.); +#75000 = LINE('',#75001,#75002); +#75001 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#75002 = VECTOR('',#75003,1.); +#75003 = DIRECTION('',(-1.,0.,0.)); +#75004 = ORIENTED_EDGE('',*,*,#70908,.T.); +#75005 = PLANE('',#75006); +#75006 = AXIS2_PLACEMENT_3D('',#75007,#75008,#75009); +#75007 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.87)); +#75008 = DIRECTION('',(0.,-2.2E-16,1.)); +#75009 = DIRECTION('',(1.,0.,0.)); +#75010 = ADVANCED_FACE('',(#75011),#75022,.F.); +#75011 = FACE_BOUND('',#75012,.F.); +#75012 = EDGE_LOOP('',(#75013,#75014,#75020,#75021)); +#75013 = ORIENTED_EDGE('',*,*,#74975,.T.); +#75014 = ORIENTED_EDGE('',*,*,#75015,.T.); +#75015 = EDGE_CURVE('',#74968,#70893,#75016,.T.); +#75016 = LINE('',#75017,#75018); +#75017 = CARTESIAN_POINT('',(7.445,-0.63,1.285)); +#75018 = VECTOR('',#75019,1.); +#75019 = DIRECTION('',(-1.,0.,0.)); +#75020 = ORIENTED_EDGE('',*,*,#70900,.F.); +#75021 = ORIENTED_EDGE('',*,*,#74999,.F.); +#75022 = PLANE('',#75023); +#75023 = AXIS2_PLACEMENT_3D('',#75024,#75025,#75026); +#75024 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#75025 = DIRECTION('',(0.,1.,0.)); +#75026 = DIRECTION('',(-1.,0.,0.)); +#75027 = ADVANCED_FACE('',(#75028),#75035,.F.); +#75028 = FACE_BOUND('',#75029,.T.); +#75029 = EDGE_LOOP('',(#75030,#75031,#75032,#75033,#75034)); +#75030 = ORIENTED_EDGE('',*,*,#74936,.T.); +#75031 = ORIENTED_EDGE('',*,*,#74967,.T.); +#75032 = ORIENTED_EDGE('',*,*,#75015,.T.); +#75033 = ORIENTED_EDGE('',*,*,#70892,.T.); +#75034 = ORIENTED_EDGE('',*,*,#74912,.F.); +#75035 = PLANE('',#75036); +#75036 = AXIS2_PLACEMENT_3D('',#75037,#75038,#75039); +#75037 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.285)); +#75038 = DIRECTION('',(0.,-2.2E-16,1.)); +#75039 = DIRECTION('',(1.,0.,0.)); +#75040 = ADVANCED_FACE('',(#75041),#75052,.T.); +#75041 = FACE_BOUND('',#75042,.T.); +#75042 = EDGE_LOOP('',(#75043,#75049,#75050,#75051)); +#75043 = ORIENTED_EDGE('',*,*,#75044,.T.); +#75044 = EDGE_CURVE('',#70877,#74881,#75045,.T.); +#75045 = LINE('',#75046,#75047); +#75046 = CARTESIAN_POINT('',(6.19,0.855,0.19)); +#75047 = VECTOR('',#75048,1.); +#75048 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#75049 = ORIENTED_EDGE('',*,*,#74897,.T.); +#75050 = ORIENTED_EDGE('',*,*,#74918,.T.); +#75051 = ORIENTED_EDGE('',*,*,#70884,.F.); +#75052 = PLANE('',#75053); +#75053 = AXIS2_PLACEMENT_3D('',#75054,#75055,#75056); +#75054 = CARTESIAN_POINT('',(6.945,0.1,-1.E-02)); +#75055 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#75056 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#75057 = ADVANCED_FACE('',(#75058,#75111,#75145),#75179,.F.); +#75058 = FACE_BOUND('',#75059,.F.); +#75059 = EDGE_LOOP('',(#75060,#75061,#75062,#75063,#75064,#75065,#75066, + #75067,#75068,#75069,#75070,#75071,#75072,#75073,#75074,#75075, + #75076,#75077,#75078,#75079,#75080,#75081,#75082,#75083,#75084, + #75085,#75086,#75087,#75088,#75089,#75090,#75091,#75092,#75093, + #75094,#75100,#75101,#75102,#75103,#75104,#75105,#75106,#75107, + #75108,#75109,#75110)); +#75060 = ORIENTED_EDGE('',*,*,#71311,.F.); +#75061 = ORIENTED_EDGE('',*,*,#71147,.T.); +#75062 = ORIENTED_EDGE('',*,*,#71212,.F.); +#75063 = ORIENTED_EDGE('',*,*,#71297,.F.); +#75064 = ORIENTED_EDGE('',*,*,#71280,.F.); +#75065 = ORIENTED_EDGE('',*,*,#73305,.T.); +#75066 = ORIENTED_EDGE('',*,*,#73354,.F.); +#75067 = ORIENTED_EDGE('',*,*,#73439,.F.); +#75068 = ORIENTED_EDGE('',*,*,#73422,.F.); +#75069 = ORIENTED_EDGE('',*,*,#73465,.T.); +#75070 = ORIENTED_EDGE('',*,*,#73514,.F.); +#75071 = ORIENTED_EDGE('',*,*,#74254,.F.); +#75072 = ORIENTED_EDGE('',*,*,#73592,.F.); +#75073 = ORIENTED_EDGE('',*,*,#74234,.T.); +#75074 = ORIENTED_EDGE('',*,*,#73678,.F.); +#75075 = ORIENTED_EDGE('',*,*,#74185,.F.); +#75076 = ORIENTED_EDGE('',*,*,#73756,.F.); +#75077 = ORIENTED_EDGE('',*,*,#74148,.T.); +#75078 = ORIENTED_EDGE('',*,*,#73834,.F.); +#75079 = ORIENTED_EDGE('',*,*,#74134,.F.); +#75080 = ORIENTED_EDGE('',*,*,#73912,.F.); +#75081 = ORIENTED_EDGE('',*,*,#74097,.T.); +#75082 = ORIENTED_EDGE('',*,*,#73998,.F.); +#75083 = ORIENTED_EDGE('',*,*,#74083,.F.); +#75084 = ORIENTED_EDGE('',*,*,#74066,.F.); +#75085 = ORIENTED_EDGE('',*,*,#74352,.T.); +#75086 = ORIENTED_EDGE('',*,*,#74401,.F.); +#75087 = ORIENTED_EDGE('',*,*,#74486,.F.); +#75088 = ORIENTED_EDGE('',*,*,#74469,.F.); +#75089 = ORIENTED_EDGE('',*,*,#74512,.T.); +#75090 = ORIENTED_EDGE('',*,*,#74561,.F.); +#75091 = ORIENTED_EDGE('',*,*,#74646,.F.); +#75092 = ORIENTED_EDGE('',*,*,#74629,.F.); +#75093 = ORIENTED_EDGE('',*,*,#74715,.T.); +#75094 = ORIENTED_EDGE('',*,*,#75095,.F.); +#75095 = EDGE_CURVE('',#70867,#74716,#75096,.T.); +#75096 = LINE('',#75097,#75098); +#75097 = CARTESIAN_POINT('',(6.3825,-2.8775,0.19)); +#75098 = VECTOR('',#75099,1.); +#75099 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#75100 = ORIENTED_EDGE('',*,*,#70876,.F.); +#75101 = ORIENTED_EDGE('',*,*,#75044,.T.); +#75102 = ORIENTED_EDGE('',*,*,#74880,.T.); +#75103 = ORIENTED_EDGE('',*,*,#74849,.T.); +#75104 = ORIENTED_EDGE('',*,*,#74818,.T.); +#75105 = ORIENTED_EDGE('',*,*,#74796,.F.); +#75106 = ORIENTED_EDGE('',*,*,#73197,.F.); +#75107 = ORIENTED_EDGE('',*,*,#73228,.F.); +#75108 = ORIENTED_EDGE('',*,*,#73252,.F.); +#75109 = ORIENTED_EDGE('',*,*,#73276,.F.); +#75110 = ORIENTED_EDGE('',*,*,#71344,.T.); +#75111 = FACE_BOUND('',#75112,.F.); +#75112 = EDGE_LOOP('',(#75113,#75123,#75131,#75139)); +#75113 = ORIENTED_EDGE('',*,*,#75114,.F.); +#75114 = EDGE_CURVE('',#75115,#75117,#75119,.T.); +#75115 = VERTEX_POINT('',#75116); +#75116 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75117 = VERTEX_POINT('',#75118); +#75118 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75119 = LINE('',#75120,#75121); +#75120 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75121 = VECTOR('',#75122,1.); +#75122 = DIRECTION('',(-1.,0.,0.)); +#75123 = ORIENTED_EDGE('',*,*,#75124,.F.); +#75124 = EDGE_CURVE('',#75125,#75115,#75127,.T.); +#75125 = VERTEX_POINT('',#75126); +#75126 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75127 = LINE('',#75128,#75129); +#75128 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75129 = VECTOR('',#75130,1.); +#75130 = DIRECTION('',(0.,1.,2.2E-16)); +#75131 = ORIENTED_EDGE('',*,*,#75132,.F.); +#75132 = EDGE_CURVE('',#75133,#75125,#75135,.T.); +#75133 = VERTEX_POINT('',#75134); +#75134 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75135 = LINE('',#75136,#75137); +#75136 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75137 = VECTOR('',#75138,1.); +#75138 = DIRECTION('',(1.,0.,0.)); +#75139 = ORIENTED_EDGE('',*,*,#75140,.F.); +#75140 = EDGE_CURVE('',#75117,#75133,#75141,.T.); +#75141 = LINE('',#75142,#75143); +#75142 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75143 = VECTOR('',#75144,1.); +#75144 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75145 = FACE_BOUND('',#75146,.F.); +#75146 = EDGE_LOOP('',(#75147,#75157,#75165,#75173)); +#75147 = ORIENTED_EDGE('',*,*,#75148,.T.); +#75148 = EDGE_CURVE('',#75149,#75151,#75153,.T.); +#75149 = VERTEX_POINT('',#75150); +#75150 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75151 = VERTEX_POINT('',#75152); +#75152 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75153 = LINE('',#75154,#75155); +#75154 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75155 = VECTOR('',#75156,1.); +#75156 = DIRECTION('',(0.,1.,2.2E-16)); +#75157 = ORIENTED_EDGE('',*,*,#75158,.T.); +#75158 = EDGE_CURVE('',#75151,#75159,#75161,.T.); +#75159 = VERTEX_POINT('',#75160); +#75160 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75161 = LINE('',#75162,#75163); +#75162 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75163 = VECTOR('',#75164,1.); +#75164 = DIRECTION('',(1.,0.,0.)); +#75165 = ORIENTED_EDGE('',*,*,#75166,.T.); +#75166 = EDGE_CURVE('',#75159,#75167,#75169,.T.); +#75167 = VERTEX_POINT('',#75168); +#75168 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75169 = LINE('',#75170,#75171); +#75170 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75171 = VECTOR('',#75172,1.); +#75172 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75173 = ORIENTED_EDGE('',*,*,#75174,.T.); +#75174 = EDGE_CURVE('',#75167,#75149,#75175,.T.); +#75175 = LINE('',#75176,#75177); +#75176 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75177 = VECTOR('',#75178,1.); +#75178 = DIRECTION('',(-1.,0.,0.)); +#75179 = PLANE('',#75180); +#75180 = AXIS2_PLACEMENT_3D('',#75181,#75182,#75183); +#75181 = CARTESIAN_POINT('',(2.975,-0.85,0.19)); +#75182 = DIRECTION('',(0.,-2.2E-16,1.)); +#75183 = DIRECTION('',(1.,0.,0.)); +#75184 = ADVANCED_FACE('',(#75185),#75210,.F.); +#75185 = FACE_BOUND('',#75186,.F.); +#75186 = EDGE_LOOP('',(#75187,#75195,#75203,#75209)); +#75187 = ORIENTED_EDGE('',*,*,#75188,.T.); +#75188 = EDGE_CURVE('',#75167,#75189,#75191,.T.); +#75189 = VERTEX_POINT('',#75190); +#75190 = CARTESIAN_POINT('',(6.735,-0.82,-9.999999999998E-03)); +#75191 = LINE('',#75192,#75193); +#75192 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75193 = VECTOR('',#75194,1.); +#75194 = DIRECTION('',(0.,0.,-1.)); +#75195 = ORIENTED_EDGE('',*,*,#75196,.T.); +#75196 = EDGE_CURVE('',#75189,#75197,#75199,.T.); +#75197 = VERTEX_POINT('',#75198); +#75198 = CARTESIAN_POINT('',(6.435,-0.82,-9.999999999998E-03)); +#75199 = LINE('',#75200,#75201); +#75200 = CARTESIAN_POINT('',(6.735,-0.82,-9.999999999998E-03)); +#75201 = VECTOR('',#75202,1.); +#75202 = DIRECTION('',(-1.,0.,0.)); +#75203 = ORIENTED_EDGE('',*,*,#75204,.F.); +#75204 = EDGE_CURVE('',#75149,#75197,#75205,.T.); +#75205 = LINE('',#75206,#75207); +#75206 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75207 = VECTOR('',#75208,1.); +#75208 = DIRECTION('',(0.,0.,-1.)); +#75209 = ORIENTED_EDGE('',*,*,#75174,.F.); +#75210 = PLANE('',#75211); +#75211 = AXIS2_PLACEMENT_3D('',#75212,#75213,#75214); +#75212 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75213 = DIRECTION('',(0.,1.,0.)); +#75214 = DIRECTION('',(-1.,0.,0.)); +#75215 = ADVANCED_FACE('',(#75216),#75241,.F.); +#75216 = FACE_BOUND('',#75217,.T.); +#75217 = EDGE_LOOP('',(#75218,#75228,#75234,#75235)); +#75218 = ORIENTED_EDGE('',*,*,#75219,.T.); +#75219 = EDGE_CURVE('',#75220,#75222,#75224,.T.); +#75220 = VERTEX_POINT('',#75221); +#75221 = CARTESIAN_POINT('',(6.435,-0.42,-9.999999999998E-03)); +#75222 = VERTEX_POINT('',#75223); +#75223 = CARTESIAN_POINT('',(6.735,-0.42,-9.999999999998E-03)); +#75224 = LINE('',#75225,#75226); +#75225 = CARTESIAN_POINT('',(6.435,-0.42,-9.999999999998E-03)); +#75226 = VECTOR('',#75227,1.); +#75227 = DIRECTION('',(1.,0.,0.)); +#75228 = ORIENTED_EDGE('',*,*,#75229,.T.); +#75229 = EDGE_CURVE('',#75222,#75189,#75230,.T.); +#75230 = LINE('',#75231,#75232); +#75231 = CARTESIAN_POINT('',(6.735,-0.42,-9.999999999998E-03)); +#75232 = VECTOR('',#75233,1.); +#75233 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75234 = ORIENTED_EDGE('',*,*,#75196,.T.); +#75235 = ORIENTED_EDGE('',*,*,#75236,.T.); +#75236 = EDGE_CURVE('',#75197,#75220,#75237,.T.); +#75237 = LINE('',#75238,#75239); +#75238 = CARTESIAN_POINT('',(6.435,-0.82,-9.999999999998E-03)); +#75239 = VECTOR('',#75240,1.); +#75240 = DIRECTION('',(0.,1.,2.2E-16)); +#75241 = PLANE('',#75242); +#75242 = AXIS2_PLACEMENT_3D('',#75243,#75244,#75245); +#75243 = CARTESIAN_POINT('',(6.585,-0.62,-9.999999999998E-03)); +#75244 = DIRECTION('',(0.,-2.2E-16,1.)); +#75245 = DIRECTION('',(1.,0.,0.)); +#75246 = ADVANCED_FACE('',(#75247),#75258,.F.); +#75247 = FACE_BOUND('',#75248,.F.); +#75248 = EDGE_LOOP('',(#75249,#75255,#75256,#75257)); +#75249 = ORIENTED_EDGE('',*,*,#75250,.T.); +#75250 = EDGE_CURVE('',#75159,#75222,#75251,.T.); +#75251 = LINE('',#75252,#75253); +#75252 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75253 = VECTOR('',#75254,1.); +#75254 = DIRECTION('',(0.,0.,-1.)); +#75255 = ORIENTED_EDGE('',*,*,#75229,.T.); +#75256 = ORIENTED_EDGE('',*,*,#75188,.F.); +#75257 = ORIENTED_EDGE('',*,*,#75166,.F.); +#75258 = PLANE('',#75259); +#75259 = AXIS2_PLACEMENT_3D('',#75260,#75261,#75262); +#75260 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75261 = DIRECTION('',(-1.,0.,0.)); +#75262 = DIRECTION('',(0.,-1.,0.)); +#75263 = ADVANCED_FACE('',(#75264),#75275,.F.); +#75264 = FACE_BOUND('',#75265,.F.); +#75265 = EDGE_LOOP('',(#75266,#75272,#75273,#75274)); +#75266 = ORIENTED_EDGE('',*,*,#75267,.T.); +#75267 = EDGE_CURVE('',#75151,#75220,#75268,.T.); +#75268 = LINE('',#75269,#75270); +#75269 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75270 = VECTOR('',#75271,1.); +#75271 = DIRECTION('',(0.,0.,-1.)); +#75272 = ORIENTED_EDGE('',*,*,#75219,.T.); +#75273 = ORIENTED_EDGE('',*,*,#75250,.F.); +#75274 = ORIENTED_EDGE('',*,*,#75158,.F.); +#75275 = PLANE('',#75276); +#75276 = AXIS2_PLACEMENT_3D('',#75277,#75278,#75279); +#75277 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75278 = DIRECTION('',(0.,-1.,0.)); +#75279 = DIRECTION('',(1.,0.,0.)); +#75280 = ADVANCED_FACE('',(#75281),#75287,.F.); +#75281 = FACE_BOUND('',#75282,.F.); +#75282 = EDGE_LOOP('',(#75283,#75284,#75285,#75286)); +#75283 = ORIENTED_EDGE('',*,*,#75204,.T.); +#75284 = ORIENTED_EDGE('',*,*,#75236,.T.); +#75285 = ORIENTED_EDGE('',*,*,#75267,.F.); +#75286 = ORIENTED_EDGE('',*,*,#75148,.F.); +#75287 = PLANE('',#75288); +#75288 = AXIS2_PLACEMENT_3D('',#75289,#75290,#75291); +#75289 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75290 = DIRECTION('',(1.,0.,0.)); +#75291 = DIRECTION('',(-0.,1.,0.)); +#75292 = ADVANCED_FACE('',(#75293),#75318,.F.); +#75293 = FACE_BOUND('',#75294,.T.); +#75294 = EDGE_LOOP('',(#75295,#75303,#75311,#75317)); +#75295 = ORIENTED_EDGE('',*,*,#75296,.T.); +#75296 = EDGE_CURVE('',#75117,#75297,#75299,.T.); +#75297 = VERTEX_POINT('',#75298); +#75298 = CARTESIAN_POINT('',(-0.785,-0.42,-9.999999999998E-03)); +#75299 = LINE('',#75300,#75301); +#75300 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75301 = VECTOR('',#75302,1.); +#75302 = DIRECTION('',(0.,0.,-1.)); +#75303 = ORIENTED_EDGE('',*,*,#75304,.T.); +#75304 = EDGE_CURVE('',#75297,#75305,#75307,.T.); +#75305 = VERTEX_POINT('',#75306); +#75306 = CARTESIAN_POINT('',(-0.785,-0.82,-9.999999999998E-03)); +#75307 = LINE('',#75308,#75309); +#75308 = CARTESIAN_POINT('',(-0.785,-0.42,-9.999999999998E-03)); +#75309 = VECTOR('',#75310,1.); +#75310 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75311 = ORIENTED_EDGE('',*,*,#75312,.F.); +#75312 = EDGE_CURVE('',#75133,#75305,#75313,.T.); +#75313 = LINE('',#75314,#75315); +#75314 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75315 = VECTOR('',#75316,1.); +#75316 = DIRECTION('',(0.,0.,-1.)); +#75317 = ORIENTED_EDGE('',*,*,#75140,.F.); +#75318 = PLANE('',#75319); +#75319 = AXIS2_PLACEMENT_3D('',#75320,#75321,#75322); +#75320 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75321 = DIRECTION('',(1.,0.,0.)); +#75322 = DIRECTION('',(-0.,1.,0.)); +#75323 = ADVANCED_FACE('',(#75324),#75349,.F.); +#75324 = FACE_BOUND('',#75325,.F.); +#75325 = EDGE_LOOP('',(#75326,#75334,#75335,#75343)); +#75326 = ORIENTED_EDGE('',*,*,#75327,.T.); +#75327 = EDGE_CURVE('',#75328,#75297,#75330,.T.); +#75328 = VERTEX_POINT('',#75329); +#75329 = CARTESIAN_POINT('',(-0.485,-0.42,-9.999999999998E-03)); +#75330 = LINE('',#75331,#75332); +#75331 = CARTESIAN_POINT('',(-0.485,-0.42,-9.999999999998E-03)); +#75332 = VECTOR('',#75333,1.); +#75333 = DIRECTION('',(-1.,0.,0.)); +#75334 = ORIENTED_EDGE('',*,*,#75304,.T.); +#75335 = ORIENTED_EDGE('',*,*,#75336,.T.); +#75336 = EDGE_CURVE('',#75305,#75337,#75339,.T.); +#75337 = VERTEX_POINT('',#75338); +#75338 = CARTESIAN_POINT('',(-0.485,-0.82,-9.999999999998E-03)); +#75339 = LINE('',#75340,#75341); +#75340 = CARTESIAN_POINT('',(-0.785,-0.82,-9.999999999998E-03)); +#75341 = VECTOR('',#75342,1.); +#75342 = DIRECTION('',(1.,0.,0.)); +#75343 = ORIENTED_EDGE('',*,*,#75344,.T.); +#75344 = EDGE_CURVE('',#75337,#75328,#75345,.T.); +#75345 = LINE('',#75346,#75347); +#75346 = CARTESIAN_POINT('',(-0.485,-0.82,-9.999999999998E-03)); +#75347 = VECTOR('',#75348,1.); +#75348 = DIRECTION('',(0.,1.,2.2E-16)); +#75349 = PLANE('',#75350); +#75350 = AXIS2_PLACEMENT_3D('',#75351,#75352,#75353); +#75351 = CARTESIAN_POINT('',(-0.635,-0.62,-9.999999999998E-03)); +#75352 = DIRECTION('',(0.,-2.2E-16,1.)); +#75353 = DIRECTION('',(1.,0.,0.)); +#75354 = ADVANCED_FACE('',(#75355),#75366,.F.); +#75355 = FACE_BOUND('',#75356,.T.); +#75356 = EDGE_LOOP('',(#75357,#75358,#75359,#75365)); +#75357 = ORIENTED_EDGE('',*,*,#75312,.T.); +#75358 = ORIENTED_EDGE('',*,*,#75336,.T.); +#75359 = ORIENTED_EDGE('',*,*,#75360,.F.); +#75360 = EDGE_CURVE('',#75125,#75337,#75361,.T.); +#75361 = LINE('',#75362,#75363); +#75362 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75363 = VECTOR('',#75364,1.); +#75364 = DIRECTION('',(0.,0.,-1.)); +#75365 = ORIENTED_EDGE('',*,*,#75132,.F.); +#75366 = PLANE('',#75367); +#75367 = AXIS2_PLACEMENT_3D('',#75368,#75369,#75370); +#75368 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75369 = DIRECTION('',(0.,1.,0.)); +#75370 = DIRECTION('',(-1.,0.,0.)); +#75371 = ADVANCED_FACE('',(#75372),#75383,.F.); +#75372 = FACE_BOUND('',#75373,.T.); +#75373 = EDGE_LOOP('',(#75374,#75375,#75376,#75382)); +#75374 = ORIENTED_EDGE('',*,*,#75360,.T.); +#75375 = ORIENTED_EDGE('',*,*,#75344,.T.); +#75376 = ORIENTED_EDGE('',*,*,#75377,.F.); +#75377 = EDGE_CURVE('',#75115,#75328,#75378,.T.); +#75378 = LINE('',#75379,#75380); +#75379 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75380 = VECTOR('',#75381,1.); +#75381 = DIRECTION('',(0.,0.,-1.)); +#75382 = ORIENTED_EDGE('',*,*,#75124,.F.); +#75383 = PLANE('',#75384); +#75384 = AXIS2_PLACEMENT_3D('',#75385,#75386,#75387); +#75385 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75386 = DIRECTION('',(-1.,0.,0.)); +#75387 = DIRECTION('',(0.,-1.,0.)); +#75388 = ADVANCED_FACE('',(#75389),#75395,.F.); +#75389 = FACE_BOUND('',#75390,.T.); +#75390 = EDGE_LOOP('',(#75391,#75392,#75393,#75394)); +#75391 = ORIENTED_EDGE('',*,*,#75377,.T.); +#75392 = ORIENTED_EDGE('',*,*,#75327,.T.); +#75393 = ORIENTED_EDGE('',*,*,#75296,.F.); +#75394 = ORIENTED_EDGE('',*,*,#75114,.F.); +#75395 = PLANE('',#75396); +#75396 = AXIS2_PLACEMENT_3D('',#75397,#75398,#75399); +#75397 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75398 = DIRECTION('',(0.,-1.,0.)); +#75399 = DIRECTION('',(1.,0.,0.)); +#75400 = ADVANCED_FACE('',(#75401),#75407,.F.); +#75401 = FACE_BOUND('',#75402,.T.); +#75402 = EDGE_LOOP('',(#75403,#75404,#75405,#75406)); +#75403 = ORIENTED_EDGE('',*,*,#75095,.F.); +#75404 = ORIENTED_EDGE('',*,*,#70866,.T.); +#75405 = ORIENTED_EDGE('',*,*,#70965,.T.); +#75406 = ORIENTED_EDGE('',*,*,#74726,.F.); +#75407 = PLANE('',#75408); +#75408 = AXIS2_PLACEMENT_3D('',#75409,#75410,#75411); +#75409 = CARTESIAN_POINT('',(7.0725,-2.1875,0.19)); +#75410 = DIRECTION('',(-0.707106781187,0.707106781187,2.999999999998E-17 + )); +#75411 = DIRECTION('',(-2.121320343558E-17,2.121320343558E-17,-1.)); +#75412 = MANIFOLD_SOLID_BREP('',#75413); +#75413 = CLOSED_SHELL('',(#75414,#75454,#75485,#75516,#75538,#75550)); +#75414 = ADVANCED_FACE('',(#75415),#75449,.F.); +#75415 = FACE_BOUND('',#75416,.F.); +#75416 = EDGE_LOOP('',(#75417,#75427,#75435,#75443)); +#75417 = ORIENTED_EDGE('',*,*,#75418,.T.); +#75418 = EDGE_CURVE('',#75419,#75421,#75423,.T.); +#75419 = VERTEX_POINT('',#75420); +#75420 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75421 = VERTEX_POINT('',#75422); +#75422 = CARTESIAN_POINT('',(0.4,-5.6792,2.219)); +#75423 = LINE('',#75424,#75425); +#75424 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75425 = VECTOR('',#75426,1.); +#75426 = DIRECTION('',(0.,0.,1.)); +#75427 = ORIENTED_EDGE('',*,*,#75428,.T.); +#75428 = EDGE_CURVE('',#75421,#75429,#75431,.T.); +#75429 = VERTEX_POINT('',#75430); +#75430 = CARTESIAN_POINT('',(0.15,-5.6792,2.219)); +#75431 = LINE('',#75432,#75433); +#75432 = CARTESIAN_POINT('',(0.4,-5.6792,2.219)); +#75433 = VECTOR('',#75434,1.); +#75434 = DIRECTION('',(-1.,0.,0.)); +#75435 = ORIENTED_EDGE('',*,*,#75436,.F.); +#75436 = EDGE_CURVE('',#75437,#75429,#75439,.T.); +#75437 = VERTEX_POINT('',#75438); +#75438 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75439 = LINE('',#75440,#75441); +#75440 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75441 = VECTOR('',#75442,1.); +#75442 = DIRECTION('',(0.,0.,1.)); +#75443 = ORIENTED_EDGE('',*,*,#75444,.F.); +#75444 = EDGE_CURVE('',#75419,#75437,#75445,.T.); +#75445 = LINE('',#75446,#75447); +#75446 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75447 = VECTOR('',#75448,1.); +#75448 = DIRECTION('',(-1.,0.,0.)); +#75449 = PLANE('',#75450); +#75450 = AXIS2_PLACEMENT_3D('',#75451,#75452,#75453); +#75451 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75452 = DIRECTION('',(0.,-1.,0.)); +#75453 = DIRECTION('',(-1.,0.,0.)); +#75454 = ADVANCED_FACE('',(#75455),#75480,.F.); +#75455 = FACE_BOUND('',#75456,.F.); +#75456 = EDGE_LOOP('',(#75457,#75458,#75466,#75474)); +#75457 = ORIENTED_EDGE('',*,*,#75436,.T.); +#75458 = ORIENTED_EDGE('',*,*,#75459,.T.); +#75459 = EDGE_CURVE('',#75429,#75460,#75462,.T.); +#75460 = VERTEX_POINT('',#75461); +#75461 = CARTESIAN_POINT('',(0.15,-8.0392,2.219)); +#75462 = LINE('',#75463,#75464); +#75463 = CARTESIAN_POINT('',(0.15,-5.6792,2.219)); +#75464 = VECTOR('',#75465,1.); +#75465 = DIRECTION('',(0.,-1.,0.)); +#75466 = ORIENTED_EDGE('',*,*,#75467,.F.); +#75467 = EDGE_CURVE('',#75468,#75460,#75470,.T.); +#75468 = VERTEX_POINT('',#75469); +#75469 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75470 = LINE('',#75471,#75472); +#75471 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75472 = VECTOR('',#75473,1.); +#75473 = DIRECTION('',(0.,0.,1.)); +#75474 = ORIENTED_EDGE('',*,*,#75475,.F.); +#75475 = EDGE_CURVE('',#75437,#75468,#75476,.T.); +#75476 = LINE('',#75477,#75478); +#75477 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75478 = VECTOR('',#75479,1.); +#75479 = DIRECTION('',(0.,-1.,0.)); +#75480 = PLANE('',#75481); +#75481 = AXIS2_PLACEMENT_3D('',#75482,#75483,#75484); +#75482 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75483 = DIRECTION('',(1.,0.,0.)); +#75484 = DIRECTION('',(0.,-1.,0.)); +#75485 = ADVANCED_FACE('',(#75486),#75511,.F.); +#75486 = FACE_BOUND('',#75487,.F.); +#75487 = EDGE_LOOP('',(#75488,#75489,#75497,#75505)); +#75488 = ORIENTED_EDGE('',*,*,#75467,.T.); +#75489 = ORIENTED_EDGE('',*,*,#75490,.T.); +#75490 = EDGE_CURVE('',#75460,#75491,#75493,.T.); +#75491 = VERTEX_POINT('',#75492); +#75492 = CARTESIAN_POINT('',(0.4,-8.0392,2.219)); +#75493 = LINE('',#75494,#75495); +#75494 = CARTESIAN_POINT('',(0.15,-8.0392,2.219)); +#75495 = VECTOR('',#75496,1.); +#75496 = DIRECTION('',(1.,0.,0.)); +#75497 = ORIENTED_EDGE('',*,*,#75498,.F.); +#75498 = EDGE_CURVE('',#75499,#75491,#75501,.T.); +#75499 = VERTEX_POINT('',#75500); +#75500 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75501 = LINE('',#75502,#75503); +#75502 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75503 = VECTOR('',#75504,1.); +#75504 = DIRECTION('',(0.,0.,1.)); +#75505 = ORIENTED_EDGE('',*,*,#75506,.F.); +#75506 = EDGE_CURVE('',#75468,#75499,#75507,.T.); +#75507 = LINE('',#75508,#75509); +#75508 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75509 = VECTOR('',#75510,1.); +#75510 = DIRECTION('',(1.,0.,0.)); +#75511 = PLANE('',#75512); +#75512 = AXIS2_PLACEMENT_3D('',#75513,#75514,#75515); +#75513 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75514 = DIRECTION('',(0.,1.,0.)); +#75515 = DIRECTION('',(1.,0.,0.)); +#75516 = ADVANCED_FACE('',(#75517),#75533,.F.); +#75517 = FACE_BOUND('',#75518,.F.); +#75518 = EDGE_LOOP('',(#75519,#75520,#75526,#75527)); +#75519 = ORIENTED_EDGE('',*,*,#75498,.T.); +#75520 = ORIENTED_EDGE('',*,*,#75521,.T.); +#75521 = EDGE_CURVE('',#75491,#75421,#75522,.T.); +#75522 = LINE('',#75523,#75524); +#75523 = CARTESIAN_POINT('',(0.4,-8.0392,2.219)); +#75524 = VECTOR('',#75525,1.); +#75525 = DIRECTION('',(0.,1.,0.)); +#75526 = ORIENTED_EDGE('',*,*,#75418,.F.); +#75527 = ORIENTED_EDGE('',*,*,#75528,.F.); +#75528 = EDGE_CURVE('',#75499,#75419,#75529,.T.); +#75529 = LINE('',#75530,#75531); +#75530 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75531 = VECTOR('',#75532,1.); +#75532 = DIRECTION('',(0.,1.,0.)); +#75533 = PLANE('',#75534); +#75534 = AXIS2_PLACEMENT_3D('',#75535,#75536,#75537); +#75535 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75536 = DIRECTION('',(-1.,0.,0.)); +#75537 = DIRECTION('',(0.,1.,0.)); +#75538 = ADVANCED_FACE('',(#75539),#75545,.F.); +#75539 = FACE_BOUND('',#75540,.F.); +#75540 = EDGE_LOOP('',(#75541,#75542,#75543,#75544)); +#75541 = ORIENTED_EDGE('',*,*,#75444,.T.); +#75542 = ORIENTED_EDGE('',*,*,#75475,.T.); +#75543 = ORIENTED_EDGE('',*,*,#75506,.T.); +#75544 = ORIENTED_EDGE('',*,*,#75528,.T.); +#75545 = PLANE('',#75546); +#75546 = AXIS2_PLACEMENT_3D('',#75547,#75548,#75549); +#75547 = CARTESIAN_POINT('',(0.275,-6.8592,2.17)); +#75548 = DIRECTION('',(0.,0.,1.)); +#75549 = DIRECTION('',(1.,0.,-0.)); +#75550 = ADVANCED_FACE('',(#75551),#75557,.T.); +#75551 = FACE_BOUND('',#75552,.T.); +#75552 = EDGE_LOOP('',(#75553,#75554,#75555,#75556)); +#75553 = ORIENTED_EDGE('',*,*,#75428,.T.); +#75554 = ORIENTED_EDGE('',*,*,#75459,.T.); +#75555 = ORIENTED_EDGE('',*,*,#75490,.T.); +#75556 = ORIENTED_EDGE('',*,*,#75521,.T.); +#75557 = PLANE('',#75558); +#75558 = AXIS2_PLACEMENT_3D('',#75559,#75560,#75561); +#75559 = CARTESIAN_POINT('',(0.275,-6.8592,2.219)); +#75560 = DIRECTION('',(0.,0.,1.)); +#75561 = DIRECTION('',(1.,0.,-0.)); +#75562 = MANIFOLD_SOLID_BREP('',#75563); +#75563 = CLOSED_SHELL('',(#75564,#75604,#75635,#75666,#75688,#75700)); +#75564 = ADVANCED_FACE('',(#75565),#75599,.F.); +#75565 = FACE_BOUND('',#75566,.F.); +#75566 = EDGE_LOOP('',(#75567,#75577,#75585,#75593)); +#75567 = ORIENTED_EDGE('',*,*,#75568,.T.); +#75568 = EDGE_CURVE('',#75569,#75571,#75573,.T.); +#75569 = VERTEX_POINT('',#75570); +#75570 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75571 = VERTEX_POINT('',#75572); +#75572 = CARTESIAN_POINT('',(0.4,-5.6792,1.568)); +#75573 = LINE('',#75574,#75575); +#75574 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75575 = VECTOR('',#75576,1.); +#75576 = DIRECTION('',(0.,0.,1.)); +#75577 = ORIENTED_EDGE('',*,*,#75578,.T.); +#75578 = EDGE_CURVE('',#75571,#75579,#75581,.T.); +#75579 = VERTEX_POINT('',#75580); +#75580 = CARTESIAN_POINT('',(0.15,-5.6792,1.568)); +#75581 = LINE('',#75582,#75583); +#75582 = CARTESIAN_POINT('',(0.4,-5.6792,1.568)); +#75583 = VECTOR('',#75584,1.); +#75584 = DIRECTION('',(-1.,0.,0.)); +#75585 = ORIENTED_EDGE('',*,*,#75586,.F.); +#75586 = EDGE_CURVE('',#75587,#75579,#75589,.T.); +#75587 = VERTEX_POINT('',#75588); +#75588 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75589 = LINE('',#75590,#75591); +#75590 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75591 = VECTOR('',#75592,1.); +#75592 = DIRECTION('',(0.,0.,1.)); +#75593 = ORIENTED_EDGE('',*,*,#75594,.F.); +#75594 = EDGE_CURVE('',#75569,#75587,#75595,.T.); +#75595 = LINE('',#75596,#75597); +#75596 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75597 = VECTOR('',#75598,1.); +#75598 = DIRECTION('',(-1.,0.,0.)); +#75599 = PLANE('',#75600); +#75600 = AXIS2_PLACEMENT_3D('',#75601,#75602,#75603); +#75601 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75602 = DIRECTION('',(0.,-1.,0.)); +#75603 = DIRECTION('',(-1.,0.,0.)); +#75604 = ADVANCED_FACE('',(#75605),#75630,.F.); +#75605 = FACE_BOUND('',#75606,.F.); +#75606 = EDGE_LOOP('',(#75607,#75608,#75616,#75624)); +#75607 = ORIENTED_EDGE('',*,*,#75586,.T.); +#75608 = ORIENTED_EDGE('',*,*,#75609,.T.); +#75609 = EDGE_CURVE('',#75579,#75610,#75612,.T.); +#75610 = VERTEX_POINT('',#75611); +#75611 = CARTESIAN_POINT('',(0.15,-8.0392,1.568)); +#75612 = LINE('',#75613,#75614); +#75613 = CARTESIAN_POINT('',(0.15,-5.6792,1.568)); +#75614 = VECTOR('',#75615,1.); +#75615 = DIRECTION('',(0.,-1.,0.)); +#75616 = ORIENTED_EDGE('',*,*,#75617,.F.); +#75617 = EDGE_CURVE('',#75618,#75610,#75620,.T.); +#75618 = VERTEX_POINT('',#75619); +#75619 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75620 = LINE('',#75621,#75622); +#75621 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75622 = VECTOR('',#75623,1.); +#75623 = DIRECTION('',(0.,0.,1.)); +#75624 = ORIENTED_EDGE('',*,*,#75625,.F.); +#75625 = EDGE_CURVE('',#75587,#75618,#75626,.T.); +#75626 = LINE('',#75627,#75628); +#75627 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75628 = VECTOR('',#75629,1.); +#75629 = DIRECTION('',(0.,-1.,0.)); +#75630 = PLANE('',#75631); +#75631 = AXIS2_PLACEMENT_3D('',#75632,#75633,#75634); +#75632 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75633 = DIRECTION('',(1.,0.,0.)); +#75634 = DIRECTION('',(0.,-1.,0.)); +#75635 = ADVANCED_FACE('',(#75636),#75661,.F.); +#75636 = FACE_BOUND('',#75637,.F.); +#75637 = EDGE_LOOP('',(#75638,#75639,#75647,#75655)); +#75638 = ORIENTED_EDGE('',*,*,#75617,.T.); +#75639 = ORIENTED_EDGE('',*,*,#75640,.T.); +#75640 = EDGE_CURVE('',#75610,#75641,#75643,.T.); +#75641 = VERTEX_POINT('',#75642); +#75642 = CARTESIAN_POINT('',(0.4,-8.0392,1.568)); +#75643 = LINE('',#75644,#75645); +#75644 = CARTESIAN_POINT('',(0.15,-8.0392,1.568)); +#75645 = VECTOR('',#75646,1.); +#75646 = DIRECTION('',(1.,0.,0.)); +#75647 = ORIENTED_EDGE('',*,*,#75648,.F.); +#75648 = EDGE_CURVE('',#75649,#75641,#75651,.T.); +#75649 = VERTEX_POINT('',#75650); +#75650 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75651 = LINE('',#75652,#75653); +#75652 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75653 = VECTOR('',#75654,1.); +#75654 = DIRECTION('',(0.,0.,1.)); +#75655 = ORIENTED_EDGE('',*,*,#75656,.F.); +#75656 = EDGE_CURVE('',#75618,#75649,#75657,.T.); +#75657 = LINE('',#75658,#75659); +#75658 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75659 = VECTOR('',#75660,1.); +#75660 = DIRECTION('',(1.,0.,0.)); +#75661 = PLANE('',#75662); +#75662 = AXIS2_PLACEMENT_3D('',#75663,#75664,#75665); +#75663 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75664 = DIRECTION('',(0.,1.,0.)); +#75665 = DIRECTION('',(1.,0.,0.)); +#75666 = ADVANCED_FACE('',(#75667),#75683,.F.); +#75667 = FACE_BOUND('',#75668,.F.); +#75668 = EDGE_LOOP('',(#75669,#75670,#75676,#75677)); +#75669 = ORIENTED_EDGE('',*,*,#75648,.T.); +#75670 = ORIENTED_EDGE('',*,*,#75671,.T.); +#75671 = EDGE_CURVE('',#75641,#75571,#75672,.T.); +#75672 = LINE('',#75673,#75674); +#75673 = CARTESIAN_POINT('',(0.4,-8.0392,1.568)); +#75674 = VECTOR('',#75675,1.); +#75675 = DIRECTION('',(0.,1.,0.)); +#75676 = ORIENTED_EDGE('',*,*,#75568,.F.); +#75677 = ORIENTED_EDGE('',*,*,#75678,.F.); +#75678 = EDGE_CURVE('',#75649,#75569,#75679,.T.); +#75679 = LINE('',#75680,#75681); +#75680 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75681 = VECTOR('',#75682,1.); +#75682 = DIRECTION('',(0.,1.,0.)); +#75683 = PLANE('',#75684); +#75684 = AXIS2_PLACEMENT_3D('',#75685,#75686,#75687); +#75685 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75686 = DIRECTION('',(-1.,0.,0.)); +#75687 = DIRECTION('',(0.,1.,0.)); +#75688 = ADVANCED_FACE('',(#75689),#75695,.F.); +#75689 = FACE_BOUND('',#75690,.F.); +#75690 = EDGE_LOOP('',(#75691,#75692,#75693,#75694)); +#75691 = ORIENTED_EDGE('',*,*,#75594,.T.); +#75692 = ORIENTED_EDGE('',*,*,#75625,.T.); +#75693 = ORIENTED_EDGE('',*,*,#75656,.T.); +#75694 = ORIENTED_EDGE('',*,*,#75678,.T.); +#75695 = PLANE('',#75696); +#75696 = AXIS2_PLACEMENT_3D('',#75697,#75698,#75699); +#75697 = CARTESIAN_POINT('',(0.275,-6.8592,1.519)); +#75698 = DIRECTION('',(0.,0.,1.)); +#75699 = DIRECTION('',(1.,0.,-0.)); +#75700 = ADVANCED_FACE('',(#75701),#75707,.T.); +#75701 = FACE_BOUND('',#75702,.T.); +#75702 = EDGE_LOOP('',(#75703,#75704,#75705,#75706)); +#75703 = ORIENTED_EDGE('',*,*,#75578,.T.); +#75704 = ORIENTED_EDGE('',*,*,#75609,.T.); +#75705 = ORIENTED_EDGE('',*,*,#75640,.T.); +#75706 = ORIENTED_EDGE('',*,*,#75671,.T.); +#75707 = PLANE('',#75708); +#75708 = AXIS2_PLACEMENT_3D('',#75709,#75710,#75711); +#75709 = CARTESIAN_POINT('',(0.275,-6.8592,1.568)); +#75710 = DIRECTION('',(0.,0.,1.)); +#75711 = DIRECTION('',(1.,0.,-0.)); +#75712 = MANIFOLD_SOLID_BREP('',#75713); +#75713 = CLOSED_SHELL('',(#75714,#75754,#75785,#75816,#75838,#75850)); +#75714 = ADVANCED_FACE('',(#75715),#75749,.F.); +#75715 = FACE_BOUND('',#75716,.F.); +#75716 = EDGE_LOOP('',(#75717,#75727,#75735,#75743)); +#75717 = ORIENTED_EDGE('',*,*,#75718,.T.); +#75718 = EDGE_CURVE('',#75719,#75721,#75723,.T.); +#75719 = VERTEX_POINT('',#75720); +#75720 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75721 = VERTEX_POINT('',#75722); +#75722 = CARTESIAN_POINT('',(1.8,-5.6792,2.219)); +#75723 = LINE('',#75724,#75725); +#75724 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75725 = VECTOR('',#75726,1.); +#75726 = DIRECTION('',(0.,0.,1.)); +#75727 = ORIENTED_EDGE('',*,*,#75728,.T.); +#75728 = EDGE_CURVE('',#75721,#75729,#75731,.T.); +#75729 = VERTEX_POINT('',#75730); +#75730 = CARTESIAN_POINT('',(1.55,-5.6792,2.219)); +#75731 = LINE('',#75732,#75733); +#75732 = CARTESIAN_POINT('',(1.8,-5.6792,2.219)); +#75733 = VECTOR('',#75734,1.); +#75734 = DIRECTION('',(-1.,0.,0.)); +#75735 = ORIENTED_EDGE('',*,*,#75736,.F.); +#75736 = EDGE_CURVE('',#75737,#75729,#75739,.T.); +#75737 = VERTEX_POINT('',#75738); +#75738 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75739 = LINE('',#75740,#75741); +#75740 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75741 = VECTOR('',#75742,1.); +#75742 = DIRECTION('',(0.,0.,1.)); +#75743 = ORIENTED_EDGE('',*,*,#75744,.F.); +#75744 = EDGE_CURVE('',#75719,#75737,#75745,.T.); +#75745 = LINE('',#75746,#75747); +#75746 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75747 = VECTOR('',#75748,1.); +#75748 = DIRECTION('',(-1.,0.,0.)); +#75749 = PLANE('',#75750); +#75750 = AXIS2_PLACEMENT_3D('',#75751,#75752,#75753); +#75751 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75752 = DIRECTION('',(0.,-1.,0.)); +#75753 = DIRECTION('',(-1.,0.,0.)); +#75754 = ADVANCED_FACE('',(#75755),#75780,.F.); +#75755 = FACE_BOUND('',#75756,.F.); +#75756 = EDGE_LOOP('',(#75757,#75758,#75766,#75774)); +#75757 = ORIENTED_EDGE('',*,*,#75736,.T.); +#75758 = ORIENTED_EDGE('',*,*,#75759,.T.); +#75759 = EDGE_CURVE('',#75729,#75760,#75762,.T.); +#75760 = VERTEX_POINT('',#75761); +#75761 = CARTESIAN_POINT('',(1.55,-8.0392,2.219)); +#75762 = LINE('',#75763,#75764); +#75763 = CARTESIAN_POINT('',(1.55,-5.6792,2.219)); +#75764 = VECTOR('',#75765,1.); +#75765 = DIRECTION('',(0.,-1.,0.)); +#75766 = ORIENTED_EDGE('',*,*,#75767,.F.); +#75767 = EDGE_CURVE('',#75768,#75760,#75770,.T.); +#75768 = VERTEX_POINT('',#75769); +#75769 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75770 = LINE('',#75771,#75772); +#75771 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75772 = VECTOR('',#75773,1.); +#75773 = DIRECTION('',(0.,0.,1.)); +#75774 = ORIENTED_EDGE('',*,*,#75775,.F.); +#75775 = EDGE_CURVE('',#75737,#75768,#75776,.T.); +#75776 = LINE('',#75777,#75778); +#75777 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75778 = VECTOR('',#75779,1.); +#75779 = DIRECTION('',(0.,-1.,0.)); +#75780 = PLANE('',#75781); +#75781 = AXIS2_PLACEMENT_3D('',#75782,#75783,#75784); +#75782 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75783 = DIRECTION('',(1.,0.,0.)); +#75784 = DIRECTION('',(0.,-1.,0.)); +#75785 = ADVANCED_FACE('',(#75786),#75811,.F.); +#75786 = FACE_BOUND('',#75787,.F.); +#75787 = EDGE_LOOP('',(#75788,#75789,#75797,#75805)); +#75788 = ORIENTED_EDGE('',*,*,#75767,.T.); +#75789 = ORIENTED_EDGE('',*,*,#75790,.T.); +#75790 = EDGE_CURVE('',#75760,#75791,#75793,.T.); +#75791 = VERTEX_POINT('',#75792); +#75792 = CARTESIAN_POINT('',(1.8,-8.0392,2.219)); +#75793 = LINE('',#75794,#75795); +#75794 = CARTESIAN_POINT('',(1.55,-8.0392,2.219)); +#75795 = VECTOR('',#75796,1.); +#75796 = DIRECTION('',(1.,0.,0.)); +#75797 = ORIENTED_EDGE('',*,*,#75798,.F.); +#75798 = EDGE_CURVE('',#75799,#75791,#75801,.T.); +#75799 = VERTEX_POINT('',#75800); +#75800 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75801 = LINE('',#75802,#75803); +#75802 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75803 = VECTOR('',#75804,1.); +#75804 = DIRECTION('',(0.,0.,1.)); +#75805 = ORIENTED_EDGE('',*,*,#75806,.F.); +#75806 = EDGE_CURVE('',#75768,#75799,#75807,.T.); +#75807 = LINE('',#75808,#75809); +#75808 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75809 = VECTOR('',#75810,1.); +#75810 = DIRECTION('',(1.,0.,0.)); +#75811 = PLANE('',#75812); +#75812 = AXIS2_PLACEMENT_3D('',#75813,#75814,#75815); +#75813 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75814 = DIRECTION('',(0.,1.,0.)); +#75815 = DIRECTION('',(1.,0.,0.)); +#75816 = ADVANCED_FACE('',(#75817),#75833,.F.); +#75817 = FACE_BOUND('',#75818,.F.); +#75818 = EDGE_LOOP('',(#75819,#75820,#75826,#75827)); +#75819 = ORIENTED_EDGE('',*,*,#75798,.T.); +#75820 = ORIENTED_EDGE('',*,*,#75821,.T.); +#75821 = EDGE_CURVE('',#75791,#75721,#75822,.T.); +#75822 = LINE('',#75823,#75824); +#75823 = CARTESIAN_POINT('',(1.8,-8.0392,2.219)); +#75824 = VECTOR('',#75825,1.); +#75825 = DIRECTION('',(0.,1.,0.)); +#75826 = ORIENTED_EDGE('',*,*,#75718,.F.); +#75827 = ORIENTED_EDGE('',*,*,#75828,.F.); +#75828 = EDGE_CURVE('',#75799,#75719,#75829,.T.); +#75829 = LINE('',#75830,#75831); +#75830 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75831 = VECTOR('',#75832,1.); +#75832 = DIRECTION('',(0.,1.,0.)); +#75833 = PLANE('',#75834); +#75834 = AXIS2_PLACEMENT_3D('',#75835,#75836,#75837); +#75835 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75836 = DIRECTION('',(-1.,0.,0.)); +#75837 = DIRECTION('',(0.,1.,0.)); +#75838 = ADVANCED_FACE('',(#75839),#75845,.F.); +#75839 = FACE_BOUND('',#75840,.F.); +#75840 = EDGE_LOOP('',(#75841,#75842,#75843,#75844)); +#75841 = ORIENTED_EDGE('',*,*,#75744,.T.); +#75842 = ORIENTED_EDGE('',*,*,#75775,.T.); +#75843 = ORIENTED_EDGE('',*,*,#75806,.T.); +#75844 = ORIENTED_EDGE('',*,*,#75828,.T.); +#75845 = PLANE('',#75846); +#75846 = AXIS2_PLACEMENT_3D('',#75847,#75848,#75849); +#75847 = CARTESIAN_POINT('',(1.675,-6.8592,2.17)); +#75848 = DIRECTION('',(0.,0.,1.)); +#75849 = DIRECTION('',(1.,0.,-0.)); +#75850 = ADVANCED_FACE('',(#75851),#75857,.T.); +#75851 = FACE_BOUND('',#75852,.T.); +#75852 = EDGE_LOOP('',(#75853,#75854,#75855,#75856)); +#75853 = ORIENTED_EDGE('',*,*,#75728,.T.); +#75854 = ORIENTED_EDGE('',*,*,#75759,.T.); +#75855 = ORIENTED_EDGE('',*,*,#75790,.T.); +#75856 = ORIENTED_EDGE('',*,*,#75821,.T.); +#75857 = PLANE('',#75858); +#75858 = AXIS2_PLACEMENT_3D('',#75859,#75860,#75861); +#75859 = CARTESIAN_POINT('',(1.675,-6.8592,2.219)); +#75860 = DIRECTION('',(0.,0.,1.)); +#75861 = DIRECTION('',(1.,0.,-0.)); +#75862 = MANIFOLD_SOLID_BREP('',#75863); +#75863 = CLOSED_SHELL('',(#75864,#75904,#75935,#75966,#75988,#76000)); +#75864 = ADVANCED_FACE('',(#75865),#75899,.F.); +#75865 = FACE_BOUND('',#75866,.F.); +#75866 = EDGE_LOOP('',(#75867,#75877,#75885,#75893)); +#75867 = ORIENTED_EDGE('',*,*,#75868,.T.); +#75868 = EDGE_CURVE('',#75869,#75871,#75873,.T.); +#75869 = VERTEX_POINT('',#75870); +#75870 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75871 = VERTEX_POINT('',#75872); +#75872 = CARTESIAN_POINT('',(1.8,-5.6792,1.568)); +#75873 = LINE('',#75874,#75875); +#75874 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75875 = VECTOR('',#75876,1.); +#75876 = DIRECTION('',(0.,0.,1.)); +#75877 = ORIENTED_EDGE('',*,*,#75878,.T.); +#75878 = EDGE_CURVE('',#75871,#75879,#75881,.T.); +#75879 = VERTEX_POINT('',#75880); +#75880 = CARTESIAN_POINT('',(1.55,-5.6792,1.568)); +#75881 = LINE('',#75882,#75883); +#75882 = CARTESIAN_POINT('',(1.8,-5.6792,1.568)); +#75883 = VECTOR('',#75884,1.); +#75884 = DIRECTION('',(-1.,0.,0.)); +#75885 = ORIENTED_EDGE('',*,*,#75886,.F.); +#75886 = EDGE_CURVE('',#75887,#75879,#75889,.T.); +#75887 = VERTEX_POINT('',#75888); +#75888 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75889 = LINE('',#75890,#75891); +#75890 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75891 = VECTOR('',#75892,1.); +#75892 = DIRECTION('',(0.,0.,1.)); +#75893 = ORIENTED_EDGE('',*,*,#75894,.F.); +#75894 = EDGE_CURVE('',#75869,#75887,#75895,.T.); +#75895 = LINE('',#75896,#75897); +#75896 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75897 = VECTOR('',#75898,1.); +#75898 = DIRECTION('',(-1.,0.,0.)); +#75899 = PLANE('',#75900); +#75900 = AXIS2_PLACEMENT_3D('',#75901,#75902,#75903); +#75901 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75902 = DIRECTION('',(0.,-1.,0.)); +#75903 = DIRECTION('',(-1.,0.,0.)); +#75904 = ADVANCED_FACE('',(#75905),#75930,.F.); +#75905 = FACE_BOUND('',#75906,.F.); +#75906 = EDGE_LOOP('',(#75907,#75908,#75916,#75924)); +#75907 = ORIENTED_EDGE('',*,*,#75886,.T.); +#75908 = ORIENTED_EDGE('',*,*,#75909,.T.); +#75909 = EDGE_CURVE('',#75879,#75910,#75912,.T.); +#75910 = VERTEX_POINT('',#75911); +#75911 = CARTESIAN_POINT('',(1.55,-8.0392,1.568)); +#75912 = LINE('',#75913,#75914); +#75913 = CARTESIAN_POINT('',(1.55,-5.6792,1.568)); +#75914 = VECTOR('',#75915,1.); +#75915 = DIRECTION('',(0.,-1.,0.)); +#75916 = ORIENTED_EDGE('',*,*,#75917,.F.); +#75917 = EDGE_CURVE('',#75918,#75910,#75920,.T.); +#75918 = VERTEX_POINT('',#75919); +#75919 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75920 = LINE('',#75921,#75922); +#75921 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75922 = VECTOR('',#75923,1.); +#75923 = DIRECTION('',(0.,0.,1.)); +#75924 = ORIENTED_EDGE('',*,*,#75925,.F.); +#75925 = EDGE_CURVE('',#75887,#75918,#75926,.T.); +#75926 = LINE('',#75927,#75928); +#75927 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75928 = VECTOR('',#75929,1.); +#75929 = DIRECTION('',(0.,-1.,0.)); +#75930 = PLANE('',#75931); +#75931 = AXIS2_PLACEMENT_3D('',#75932,#75933,#75934); +#75932 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75933 = DIRECTION('',(1.,0.,0.)); +#75934 = DIRECTION('',(0.,-1.,0.)); +#75935 = ADVANCED_FACE('',(#75936),#75961,.F.); +#75936 = FACE_BOUND('',#75937,.F.); +#75937 = EDGE_LOOP('',(#75938,#75939,#75947,#75955)); +#75938 = ORIENTED_EDGE('',*,*,#75917,.T.); +#75939 = ORIENTED_EDGE('',*,*,#75940,.T.); +#75940 = EDGE_CURVE('',#75910,#75941,#75943,.T.); +#75941 = VERTEX_POINT('',#75942); +#75942 = CARTESIAN_POINT('',(1.8,-8.0392,1.568)); +#75943 = LINE('',#75944,#75945); +#75944 = CARTESIAN_POINT('',(1.55,-8.0392,1.568)); +#75945 = VECTOR('',#75946,1.); +#75946 = DIRECTION('',(1.,0.,0.)); +#75947 = ORIENTED_EDGE('',*,*,#75948,.F.); +#75948 = EDGE_CURVE('',#75949,#75941,#75951,.T.); +#75949 = VERTEX_POINT('',#75950); +#75950 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75951 = LINE('',#75952,#75953); +#75952 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75953 = VECTOR('',#75954,1.); +#75954 = DIRECTION('',(0.,0.,1.)); +#75955 = ORIENTED_EDGE('',*,*,#75956,.F.); +#75956 = EDGE_CURVE('',#75918,#75949,#75957,.T.); +#75957 = LINE('',#75958,#75959); +#75958 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75959 = VECTOR('',#75960,1.); +#75960 = DIRECTION('',(1.,0.,0.)); +#75961 = PLANE('',#75962); +#75962 = AXIS2_PLACEMENT_3D('',#75963,#75964,#75965); +#75963 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75964 = DIRECTION('',(0.,1.,0.)); +#75965 = DIRECTION('',(1.,0.,0.)); +#75966 = ADVANCED_FACE('',(#75967),#75983,.F.); +#75967 = FACE_BOUND('',#75968,.F.); +#75968 = EDGE_LOOP('',(#75969,#75970,#75976,#75977)); +#75969 = ORIENTED_EDGE('',*,*,#75948,.T.); +#75970 = ORIENTED_EDGE('',*,*,#75971,.T.); +#75971 = EDGE_CURVE('',#75941,#75871,#75972,.T.); +#75972 = LINE('',#75973,#75974); +#75973 = CARTESIAN_POINT('',(1.8,-8.0392,1.568)); +#75974 = VECTOR('',#75975,1.); +#75975 = DIRECTION('',(0.,1.,0.)); +#75976 = ORIENTED_EDGE('',*,*,#75868,.F.); +#75977 = ORIENTED_EDGE('',*,*,#75978,.F.); +#75978 = EDGE_CURVE('',#75949,#75869,#75979,.T.); +#75979 = LINE('',#75980,#75981); +#75980 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75981 = VECTOR('',#75982,1.); +#75982 = DIRECTION('',(0.,1.,0.)); +#75983 = PLANE('',#75984); +#75984 = AXIS2_PLACEMENT_3D('',#75985,#75986,#75987); +#75985 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75986 = DIRECTION('',(-1.,0.,0.)); +#75987 = DIRECTION('',(0.,1.,0.)); +#75988 = ADVANCED_FACE('',(#75989),#75995,.F.); +#75989 = FACE_BOUND('',#75990,.F.); +#75990 = EDGE_LOOP('',(#75991,#75992,#75993,#75994)); +#75991 = ORIENTED_EDGE('',*,*,#75894,.T.); +#75992 = ORIENTED_EDGE('',*,*,#75925,.T.); +#75993 = ORIENTED_EDGE('',*,*,#75956,.T.); +#75994 = ORIENTED_EDGE('',*,*,#75978,.T.); +#75995 = PLANE('',#75996); +#75996 = AXIS2_PLACEMENT_3D('',#75997,#75998,#75999); +#75997 = CARTESIAN_POINT('',(1.675,-6.8592,1.519)); +#75998 = DIRECTION('',(0.,0.,1.)); +#75999 = DIRECTION('',(1.,0.,-0.)); +#76000 = ADVANCED_FACE('',(#76001),#76007,.T.); +#76001 = FACE_BOUND('',#76002,.T.); +#76002 = EDGE_LOOP('',(#76003,#76004,#76005,#76006)); +#76003 = ORIENTED_EDGE('',*,*,#75878,.T.); +#76004 = ORIENTED_EDGE('',*,*,#75909,.T.); +#76005 = ORIENTED_EDGE('',*,*,#75940,.T.); +#76006 = ORIENTED_EDGE('',*,*,#75971,.T.); +#76007 = PLANE('',#76008); +#76008 = AXIS2_PLACEMENT_3D('',#76009,#76010,#76011); +#76009 = CARTESIAN_POINT('',(1.675,-6.8592,1.568)); +#76010 = DIRECTION('',(0.,0.,1.)); +#76011 = DIRECTION('',(1.,0.,-0.)); +#76012 = MANIFOLD_SOLID_BREP('',#76013); +#76013 = CLOSED_SHELL('',(#76014,#76054,#76085,#76116,#76138,#76150)); +#76014 = ADVANCED_FACE('',(#76015),#76049,.F.); +#76015 = FACE_BOUND('',#76016,.F.); +#76016 = EDGE_LOOP('',(#76017,#76027,#76035,#76043)); +#76017 = ORIENTED_EDGE('',*,*,#76018,.T.); +#76018 = EDGE_CURVE('',#76019,#76021,#76023,.T.); +#76019 = VERTEX_POINT('',#76020); +#76020 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76021 = VERTEX_POINT('',#76022); +#76022 = CARTESIAN_POINT('',(4.4,-5.6792,2.219)); +#76023 = LINE('',#76024,#76025); +#76024 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76025 = VECTOR('',#76026,1.); +#76026 = DIRECTION('',(0.,0.,1.)); +#76027 = ORIENTED_EDGE('',*,*,#76028,.T.); +#76028 = EDGE_CURVE('',#76021,#76029,#76031,.T.); +#76029 = VERTEX_POINT('',#76030); +#76030 = CARTESIAN_POINT('',(4.15,-5.6792,2.219)); +#76031 = LINE('',#76032,#76033); +#76032 = CARTESIAN_POINT('',(4.4,-5.6792,2.219)); +#76033 = VECTOR('',#76034,1.); +#76034 = DIRECTION('',(-1.,0.,0.)); +#76035 = ORIENTED_EDGE('',*,*,#76036,.F.); +#76036 = EDGE_CURVE('',#76037,#76029,#76039,.T.); +#76037 = VERTEX_POINT('',#76038); +#76038 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76039 = LINE('',#76040,#76041); +#76040 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76041 = VECTOR('',#76042,1.); +#76042 = DIRECTION('',(0.,0.,1.)); +#76043 = ORIENTED_EDGE('',*,*,#76044,.F.); +#76044 = EDGE_CURVE('',#76019,#76037,#76045,.T.); +#76045 = LINE('',#76046,#76047); +#76046 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76047 = VECTOR('',#76048,1.); +#76048 = DIRECTION('',(-1.,0.,0.)); +#76049 = PLANE('',#76050); +#76050 = AXIS2_PLACEMENT_3D('',#76051,#76052,#76053); +#76051 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76052 = DIRECTION('',(0.,-1.,0.)); +#76053 = DIRECTION('',(-1.,0.,0.)); +#76054 = ADVANCED_FACE('',(#76055),#76080,.F.); +#76055 = FACE_BOUND('',#76056,.F.); +#76056 = EDGE_LOOP('',(#76057,#76058,#76066,#76074)); +#76057 = ORIENTED_EDGE('',*,*,#76036,.T.); +#76058 = ORIENTED_EDGE('',*,*,#76059,.T.); +#76059 = EDGE_CURVE('',#76029,#76060,#76062,.T.); +#76060 = VERTEX_POINT('',#76061); +#76061 = CARTESIAN_POINT('',(4.15,-8.0392,2.219)); +#76062 = LINE('',#76063,#76064); +#76063 = CARTESIAN_POINT('',(4.15,-5.6792,2.219)); +#76064 = VECTOR('',#76065,1.); +#76065 = DIRECTION('',(0.,-1.,0.)); +#76066 = ORIENTED_EDGE('',*,*,#76067,.F.); +#76067 = EDGE_CURVE('',#76068,#76060,#76070,.T.); +#76068 = VERTEX_POINT('',#76069); +#76069 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76070 = LINE('',#76071,#76072); +#76071 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76072 = VECTOR('',#76073,1.); +#76073 = DIRECTION('',(0.,0.,1.)); +#76074 = ORIENTED_EDGE('',*,*,#76075,.F.); +#76075 = EDGE_CURVE('',#76037,#76068,#76076,.T.); +#76076 = LINE('',#76077,#76078); +#76077 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76078 = VECTOR('',#76079,1.); +#76079 = DIRECTION('',(0.,-1.,0.)); +#76080 = PLANE('',#76081); +#76081 = AXIS2_PLACEMENT_3D('',#76082,#76083,#76084); +#76082 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76083 = DIRECTION('',(1.,0.,0.)); +#76084 = DIRECTION('',(0.,-1.,0.)); +#76085 = ADVANCED_FACE('',(#76086),#76111,.F.); +#76086 = FACE_BOUND('',#76087,.F.); +#76087 = EDGE_LOOP('',(#76088,#76089,#76097,#76105)); +#76088 = ORIENTED_EDGE('',*,*,#76067,.T.); +#76089 = ORIENTED_EDGE('',*,*,#76090,.T.); +#76090 = EDGE_CURVE('',#76060,#76091,#76093,.T.); +#76091 = VERTEX_POINT('',#76092); +#76092 = CARTESIAN_POINT('',(4.4,-8.0392,2.219)); +#76093 = LINE('',#76094,#76095); +#76094 = CARTESIAN_POINT('',(4.15,-8.0392,2.219)); +#76095 = VECTOR('',#76096,1.); +#76096 = DIRECTION('',(1.,0.,0.)); +#76097 = ORIENTED_EDGE('',*,*,#76098,.F.); +#76098 = EDGE_CURVE('',#76099,#76091,#76101,.T.); +#76099 = VERTEX_POINT('',#76100); +#76100 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76101 = LINE('',#76102,#76103); +#76102 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76103 = VECTOR('',#76104,1.); +#76104 = DIRECTION('',(0.,0.,1.)); +#76105 = ORIENTED_EDGE('',*,*,#76106,.F.); +#76106 = EDGE_CURVE('',#76068,#76099,#76107,.T.); +#76107 = LINE('',#76108,#76109); +#76108 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76109 = VECTOR('',#76110,1.); +#76110 = DIRECTION('',(1.,0.,0.)); +#76111 = PLANE('',#76112); +#76112 = AXIS2_PLACEMENT_3D('',#76113,#76114,#76115); +#76113 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76114 = DIRECTION('',(0.,1.,0.)); +#76115 = DIRECTION('',(1.,0.,0.)); +#76116 = ADVANCED_FACE('',(#76117),#76133,.F.); +#76117 = FACE_BOUND('',#76118,.F.); +#76118 = EDGE_LOOP('',(#76119,#76120,#76126,#76127)); +#76119 = ORIENTED_EDGE('',*,*,#76098,.T.); +#76120 = ORIENTED_EDGE('',*,*,#76121,.T.); +#76121 = EDGE_CURVE('',#76091,#76021,#76122,.T.); +#76122 = LINE('',#76123,#76124); +#76123 = CARTESIAN_POINT('',(4.4,-8.0392,2.219)); +#76124 = VECTOR('',#76125,1.); +#76125 = DIRECTION('',(0.,1.,0.)); +#76126 = ORIENTED_EDGE('',*,*,#76018,.F.); +#76127 = ORIENTED_EDGE('',*,*,#76128,.F.); +#76128 = EDGE_CURVE('',#76099,#76019,#76129,.T.); +#76129 = LINE('',#76130,#76131); +#76130 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76131 = VECTOR('',#76132,1.); +#76132 = DIRECTION('',(0.,1.,0.)); +#76133 = PLANE('',#76134); +#76134 = AXIS2_PLACEMENT_3D('',#76135,#76136,#76137); +#76135 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76136 = DIRECTION('',(-1.,0.,0.)); +#76137 = DIRECTION('',(0.,1.,0.)); +#76138 = ADVANCED_FACE('',(#76139),#76145,.F.); +#76139 = FACE_BOUND('',#76140,.F.); +#76140 = EDGE_LOOP('',(#76141,#76142,#76143,#76144)); +#76141 = ORIENTED_EDGE('',*,*,#76044,.T.); +#76142 = ORIENTED_EDGE('',*,*,#76075,.T.); +#76143 = ORIENTED_EDGE('',*,*,#76106,.T.); +#76144 = ORIENTED_EDGE('',*,*,#76128,.T.); +#76145 = PLANE('',#76146); +#76146 = AXIS2_PLACEMENT_3D('',#76147,#76148,#76149); +#76147 = CARTESIAN_POINT('',(4.275,-6.8592,2.17)); +#76148 = DIRECTION('',(0.,0.,1.)); +#76149 = DIRECTION('',(1.,0.,-0.)); +#76150 = ADVANCED_FACE('',(#76151),#76157,.T.); +#76151 = FACE_BOUND('',#76152,.T.); +#76152 = EDGE_LOOP('',(#76153,#76154,#76155,#76156)); +#76153 = ORIENTED_EDGE('',*,*,#76028,.T.); +#76154 = ORIENTED_EDGE('',*,*,#76059,.T.); +#76155 = ORIENTED_EDGE('',*,*,#76090,.T.); +#76156 = ORIENTED_EDGE('',*,*,#76121,.T.); +#76157 = PLANE('',#76158); +#76158 = AXIS2_PLACEMENT_3D('',#76159,#76160,#76161); +#76159 = CARTESIAN_POINT('',(4.275,-6.8592,2.219)); +#76160 = DIRECTION('',(0.,0.,1.)); +#76161 = DIRECTION('',(1.,0.,-0.)); +#76162 = MANIFOLD_SOLID_BREP('',#76163); +#76163 = CLOSED_SHELL('',(#76164,#76204,#76235,#76266,#76288,#76300)); +#76164 = ADVANCED_FACE('',(#76165),#76199,.F.); +#76165 = FACE_BOUND('',#76166,.F.); +#76166 = EDGE_LOOP('',(#76167,#76177,#76185,#76193)); +#76167 = ORIENTED_EDGE('',*,*,#76168,.T.); +#76168 = EDGE_CURVE('',#76169,#76171,#76173,.T.); +#76169 = VERTEX_POINT('',#76170); +#76170 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76171 = VERTEX_POINT('',#76172); +#76172 = CARTESIAN_POINT('',(4.4,-5.6792,1.568)); +#76173 = LINE('',#76174,#76175); +#76174 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76175 = VECTOR('',#76176,1.); +#76176 = DIRECTION('',(0.,0.,1.)); +#76177 = ORIENTED_EDGE('',*,*,#76178,.T.); +#76178 = EDGE_CURVE('',#76171,#76179,#76181,.T.); +#76179 = VERTEX_POINT('',#76180); +#76180 = CARTESIAN_POINT('',(4.15,-5.6792,1.568)); +#76181 = LINE('',#76182,#76183); +#76182 = CARTESIAN_POINT('',(4.4,-5.6792,1.568)); +#76183 = VECTOR('',#76184,1.); +#76184 = DIRECTION('',(-1.,0.,0.)); +#76185 = ORIENTED_EDGE('',*,*,#76186,.F.); +#76186 = EDGE_CURVE('',#76187,#76179,#76189,.T.); +#76187 = VERTEX_POINT('',#76188); +#76188 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76189 = LINE('',#76190,#76191); +#76190 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76191 = VECTOR('',#76192,1.); +#76192 = DIRECTION('',(0.,0.,1.)); +#76193 = ORIENTED_EDGE('',*,*,#76194,.F.); +#76194 = EDGE_CURVE('',#76169,#76187,#76195,.T.); +#76195 = LINE('',#76196,#76197); +#76196 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76197 = VECTOR('',#76198,1.); +#76198 = DIRECTION('',(-1.,0.,0.)); +#76199 = PLANE('',#76200); +#76200 = AXIS2_PLACEMENT_3D('',#76201,#76202,#76203); +#76201 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76202 = DIRECTION('',(0.,-1.,0.)); +#76203 = DIRECTION('',(-1.,0.,0.)); +#76204 = ADVANCED_FACE('',(#76205),#76230,.F.); +#76205 = FACE_BOUND('',#76206,.F.); +#76206 = EDGE_LOOP('',(#76207,#76208,#76216,#76224)); +#76207 = ORIENTED_EDGE('',*,*,#76186,.T.); +#76208 = ORIENTED_EDGE('',*,*,#76209,.T.); +#76209 = EDGE_CURVE('',#76179,#76210,#76212,.T.); +#76210 = VERTEX_POINT('',#76211); +#76211 = CARTESIAN_POINT('',(4.15,-8.0392,1.568)); +#76212 = LINE('',#76213,#76214); +#76213 = CARTESIAN_POINT('',(4.15,-5.6792,1.568)); +#76214 = VECTOR('',#76215,1.); +#76215 = DIRECTION('',(0.,-1.,0.)); +#76216 = ORIENTED_EDGE('',*,*,#76217,.F.); +#76217 = EDGE_CURVE('',#76218,#76210,#76220,.T.); +#76218 = VERTEX_POINT('',#76219); +#76219 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76220 = LINE('',#76221,#76222); +#76221 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76222 = VECTOR('',#76223,1.); +#76223 = DIRECTION('',(0.,0.,1.)); +#76224 = ORIENTED_EDGE('',*,*,#76225,.F.); +#76225 = EDGE_CURVE('',#76187,#76218,#76226,.T.); +#76226 = LINE('',#76227,#76228); +#76227 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76228 = VECTOR('',#76229,1.); +#76229 = DIRECTION('',(0.,-1.,0.)); +#76230 = PLANE('',#76231); +#76231 = AXIS2_PLACEMENT_3D('',#76232,#76233,#76234); +#76232 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76233 = DIRECTION('',(1.,0.,0.)); +#76234 = DIRECTION('',(0.,-1.,0.)); +#76235 = ADVANCED_FACE('',(#76236),#76261,.F.); +#76236 = FACE_BOUND('',#76237,.F.); +#76237 = EDGE_LOOP('',(#76238,#76239,#76247,#76255)); +#76238 = ORIENTED_EDGE('',*,*,#76217,.T.); +#76239 = ORIENTED_EDGE('',*,*,#76240,.T.); +#76240 = EDGE_CURVE('',#76210,#76241,#76243,.T.); +#76241 = VERTEX_POINT('',#76242); +#76242 = CARTESIAN_POINT('',(4.4,-8.0392,1.568)); +#76243 = LINE('',#76244,#76245); +#76244 = CARTESIAN_POINT('',(4.15,-8.0392,1.568)); +#76245 = VECTOR('',#76246,1.); +#76246 = DIRECTION('',(1.,0.,0.)); +#76247 = ORIENTED_EDGE('',*,*,#76248,.F.); +#76248 = EDGE_CURVE('',#76249,#76241,#76251,.T.); +#76249 = VERTEX_POINT('',#76250); +#76250 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76251 = LINE('',#76252,#76253); +#76252 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76253 = VECTOR('',#76254,1.); +#76254 = DIRECTION('',(0.,0.,1.)); +#76255 = ORIENTED_EDGE('',*,*,#76256,.F.); +#76256 = EDGE_CURVE('',#76218,#76249,#76257,.T.); +#76257 = LINE('',#76258,#76259); +#76258 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76259 = VECTOR('',#76260,1.); +#76260 = DIRECTION('',(1.,0.,0.)); +#76261 = PLANE('',#76262); +#76262 = AXIS2_PLACEMENT_3D('',#76263,#76264,#76265); +#76263 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76264 = DIRECTION('',(0.,1.,0.)); +#76265 = DIRECTION('',(1.,0.,0.)); +#76266 = ADVANCED_FACE('',(#76267),#76283,.F.); +#76267 = FACE_BOUND('',#76268,.F.); +#76268 = EDGE_LOOP('',(#76269,#76270,#76276,#76277)); +#76269 = ORIENTED_EDGE('',*,*,#76248,.T.); +#76270 = ORIENTED_EDGE('',*,*,#76271,.T.); +#76271 = EDGE_CURVE('',#76241,#76171,#76272,.T.); +#76272 = LINE('',#76273,#76274); +#76273 = CARTESIAN_POINT('',(4.4,-8.0392,1.568)); +#76274 = VECTOR('',#76275,1.); +#76275 = DIRECTION('',(0.,1.,0.)); +#76276 = ORIENTED_EDGE('',*,*,#76168,.F.); +#76277 = ORIENTED_EDGE('',*,*,#76278,.F.); +#76278 = EDGE_CURVE('',#76249,#76169,#76279,.T.); +#76279 = LINE('',#76280,#76281); +#76280 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76281 = VECTOR('',#76282,1.); +#76282 = DIRECTION('',(0.,1.,0.)); +#76283 = PLANE('',#76284); +#76284 = AXIS2_PLACEMENT_3D('',#76285,#76286,#76287); +#76285 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76286 = DIRECTION('',(-1.,0.,0.)); +#76287 = DIRECTION('',(0.,1.,0.)); +#76288 = ADVANCED_FACE('',(#76289),#76295,.F.); +#76289 = FACE_BOUND('',#76290,.F.); +#76290 = EDGE_LOOP('',(#76291,#76292,#76293,#76294)); +#76291 = ORIENTED_EDGE('',*,*,#76194,.T.); +#76292 = ORIENTED_EDGE('',*,*,#76225,.T.); +#76293 = ORIENTED_EDGE('',*,*,#76256,.T.); +#76294 = ORIENTED_EDGE('',*,*,#76278,.T.); +#76295 = PLANE('',#76296); +#76296 = AXIS2_PLACEMENT_3D('',#76297,#76298,#76299); +#76297 = CARTESIAN_POINT('',(4.275,-6.8592,1.519)); +#76298 = DIRECTION('',(0.,0.,1.)); +#76299 = DIRECTION('',(1.,0.,-0.)); +#76300 = ADVANCED_FACE('',(#76301),#76307,.T.); +#76301 = FACE_BOUND('',#76302,.T.); +#76302 = EDGE_LOOP('',(#76303,#76304,#76305,#76306)); +#76303 = ORIENTED_EDGE('',*,*,#76178,.T.); +#76304 = ORIENTED_EDGE('',*,*,#76209,.T.); +#76305 = ORIENTED_EDGE('',*,*,#76240,.T.); +#76306 = ORIENTED_EDGE('',*,*,#76271,.T.); +#76307 = PLANE('',#76308); +#76308 = AXIS2_PLACEMENT_3D('',#76309,#76310,#76311); +#76309 = CARTESIAN_POINT('',(4.275,-6.8592,1.568)); +#76310 = DIRECTION('',(0.,0.,1.)); +#76311 = DIRECTION('',(1.,0.,-0.)); +#76312 = MANIFOLD_SOLID_BREP('',#76313); +#76313 = CLOSED_SHELL('',(#76314,#76354,#76385,#76416,#76438,#76450)); +#76314 = ADVANCED_FACE('',(#76315),#76349,.F.); +#76315 = FACE_BOUND('',#76316,.F.); +#76316 = EDGE_LOOP('',(#76317,#76327,#76335,#76343)); +#76317 = ORIENTED_EDGE('',*,*,#76318,.T.); +#76318 = EDGE_CURVE('',#76319,#76321,#76323,.T.); +#76319 = VERTEX_POINT('',#76320); +#76320 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76321 = VERTEX_POINT('',#76322); +#76322 = CARTESIAN_POINT('',(5.8,-5.6792,2.219)); +#76323 = LINE('',#76324,#76325); +#76324 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76325 = VECTOR('',#76326,1.); +#76326 = DIRECTION('',(0.,0.,1.)); +#76327 = ORIENTED_EDGE('',*,*,#76328,.T.); +#76328 = EDGE_CURVE('',#76321,#76329,#76331,.T.); +#76329 = VERTEX_POINT('',#76330); +#76330 = CARTESIAN_POINT('',(5.55,-5.6792,2.219)); +#76331 = LINE('',#76332,#76333); +#76332 = CARTESIAN_POINT('',(5.8,-5.6792,2.219)); +#76333 = VECTOR('',#76334,1.); +#76334 = DIRECTION('',(-1.,0.,0.)); +#76335 = ORIENTED_EDGE('',*,*,#76336,.F.); +#76336 = EDGE_CURVE('',#76337,#76329,#76339,.T.); +#76337 = VERTEX_POINT('',#76338); +#76338 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76339 = LINE('',#76340,#76341); +#76340 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76341 = VECTOR('',#76342,1.); +#76342 = DIRECTION('',(0.,0.,1.)); +#76343 = ORIENTED_EDGE('',*,*,#76344,.F.); +#76344 = EDGE_CURVE('',#76319,#76337,#76345,.T.); +#76345 = LINE('',#76346,#76347); +#76346 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76347 = VECTOR('',#76348,1.); +#76348 = DIRECTION('',(-1.,0.,0.)); +#76349 = PLANE('',#76350); +#76350 = AXIS2_PLACEMENT_3D('',#76351,#76352,#76353); +#76351 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76352 = DIRECTION('',(0.,-1.,0.)); +#76353 = DIRECTION('',(-1.,0.,0.)); +#76354 = ADVANCED_FACE('',(#76355),#76380,.F.); +#76355 = FACE_BOUND('',#76356,.F.); +#76356 = EDGE_LOOP('',(#76357,#76358,#76366,#76374)); +#76357 = ORIENTED_EDGE('',*,*,#76336,.T.); +#76358 = ORIENTED_EDGE('',*,*,#76359,.T.); +#76359 = EDGE_CURVE('',#76329,#76360,#76362,.T.); +#76360 = VERTEX_POINT('',#76361); +#76361 = CARTESIAN_POINT('',(5.55,-8.0392,2.219)); +#76362 = LINE('',#76363,#76364); +#76363 = CARTESIAN_POINT('',(5.55,-5.6792,2.219)); +#76364 = VECTOR('',#76365,1.); +#76365 = DIRECTION('',(0.,-1.,0.)); +#76366 = ORIENTED_EDGE('',*,*,#76367,.F.); +#76367 = EDGE_CURVE('',#76368,#76360,#76370,.T.); +#76368 = VERTEX_POINT('',#76369); +#76369 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76370 = LINE('',#76371,#76372); +#76371 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76372 = VECTOR('',#76373,1.); +#76373 = DIRECTION('',(0.,0.,1.)); +#76374 = ORIENTED_EDGE('',*,*,#76375,.F.); +#76375 = EDGE_CURVE('',#76337,#76368,#76376,.T.); +#76376 = LINE('',#76377,#76378); +#76377 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76378 = VECTOR('',#76379,1.); +#76379 = DIRECTION('',(0.,-1.,0.)); +#76380 = PLANE('',#76381); +#76381 = AXIS2_PLACEMENT_3D('',#76382,#76383,#76384); +#76382 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76383 = DIRECTION('',(1.,0.,0.)); +#76384 = DIRECTION('',(0.,-1.,0.)); +#76385 = ADVANCED_FACE('',(#76386),#76411,.F.); +#76386 = FACE_BOUND('',#76387,.F.); +#76387 = EDGE_LOOP('',(#76388,#76389,#76397,#76405)); +#76388 = ORIENTED_EDGE('',*,*,#76367,.T.); +#76389 = ORIENTED_EDGE('',*,*,#76390,.T.); +#76390 = EDGE_CURVE('',#76360,#76391,#76393,.T.); +#76391 = VERTEX_POINT('',#76392); +#76392 = CARTESIAN_POINT('',(5.8,-8.0392,2.219)); +#76393 = LINE('',#76394,#76395); +#76394 = CARTESIAN_POINT('',(5.55,-8.0392,2.219)); +#76395 = VECTOR('',#76396,1.); +#76396 = DIRECTION('',(1.,0.,0.)); +#76397 = ORIENTED_EDGE('',*,*,#76398,.F.); +#76398 = EDGE_CURVE('',#76399,#76391,#76401,.T.); +#76399 = VERTEX_POINT('',#76400); +#76400 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76401 = LINE('',#76402,#76403); +#76402 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76403 = VECTOR('',#76404,1.); +#76404 = DIRECTION('',(0.,0.,1.)); +#76405 = ORIENTED_EDGE('',*,*,#76406,.F.); +#76406 = EDGE_CURVE('',#76368,#76399,#76407,.T.); +#76407 = LINE('',#76408,#76409); +#76408 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76409 = VECTOR('',#76410,1.); +#76410 = DIRECTION('',(1.,0.,0.)); +#76411 = PLANE('',#76412); +#76412 = AXIS2_PLACEMENT_3D('',#76413,#76414,#76415); +#76413 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76414 = DIRECTION('',(0.,1.,0.)); +#76415 = DIRECTION('',(1.,0.,0.)); +#76416 = ADVANCED_FACE('',(#76417),#76433,.F.); +#76417 = FACE_BOUND('',#76418,.F.); +#76418 = EDGE_LOOP('',(#76419,#76420,#76426,#76427)); +#76419 = ORIENTED_EDGE('',*,*,#76398,.T.); +#76420 = ORIENTED_EDGE('',*,*,#76421,.T.); +#76421 = EDGE_CURVE('',#76391,#76321,#76422,.T.); +#76422 = LINE('',#76423,#76424); +#76423 = CARTESIAN_POINT('',(5.8,-8.0392,2.219)); +#76424 = VECTOR('',#76425,1.); +#76425 = DIRECTION('',(0.,1.,0.)); +#76426 = ORIENTED_EDGE('',*,*,#76318,.F.); +#76427 = ORIENTED_EDGE('',*,*,#76428,.F.); +#76428 = EDGE_CURVE('',#76399,#76319,#76429,.T.); +#76429 = LINE('',#76430,#76431); +#76430 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76431 = VECTOR('',#76432,1.); +#76432 = DIRECTION('',(0.,1.,0.)); +#76433 = PLANE('',#76434); +#76434 = AXIS2_PLACEMENT_3D('',#76435,#76436,#76437); +#76435 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76436 = DIRECTION('',(-1.,0.,0.)); +#76437 = DIRECTION('',(0.,1.,0.)); +#76438 = ADVANCED_FACE('',(#76439),#76445,.F.); +#76439 = FACE_BOUND('',#76440,.F.); +#76440 = EDGE_LOOP('',(#76441,#76442,#76443,#76444)); +#76441 = ORIENTED_EDGE('',*,*,#76344,.T.); +#76442 = ORIENTED_EDGE('',*,*,#76375,.T.); +#76443 = ORIENTED_EDGE('',*,*,#76406,.T.); +#76444 = ORIENTED_EDGE('',*,*,#76428,.T.); +#76445 = PLANE('',#76446); +#76446 = AXIS2_PLACEMENT_3D('',#76447,#76448,#76449); +#76447 = CARTESIAN_POINT('',(5.675,-6.8592,2.17)); +#76448 = DIRECTION('',(0.,0.,1.)); +#76449 = DIRECTION('',(1.,0.,-0.)); +#76450 = ADVANCED_FACE('',(#76451),#76457,.T.); +#76451 = FACE_BOUND('',#76452,.T.); +#76452 = EDGE_LOOP('',(#76453,#76454,#76455,#76456)); +#76453 = ORIENTED_EDGE('',*,*,#76328,.T.); +#76454 = ORIENTED_EDGE('',*,*,#76359,.T.); +#76455 = ORIENTED_EDGE('',*,*,#76390,.T.); +#76456 = ORIENTED_EDGE('',*,*,#76421,.T.); +#76457 = PLANE('',#76458); +#76458 = AXIS2_PLACEMENT_3D('',#76459,#76460,#76461); +#76459 = CARTESIAN_POINT('',(5.675,-6.8592,2.219)); +#76460 = DIRECTION('',(0.,0.,1.)); +#76461 = DIRECTION('',(1.,0.,-0.)); +#76462 = MANIFOLD_SOLID_BREP('',#76463); +#76463 = CLOSED_SHELL('',(#76464,#76504,#76535,#76566,#76588,#76600)); +#76464 = ADVANCED_FACE('',(#76465),#76499,.F.); +#76465 = FACE_BOUND('',#76466,.F.); +#76466 = EDGE_LOOP('',(#76467,#76477,#76485,#76493)); +#76467 = ORIENTED_EDGE('',*,*,#76468,.T.); +#76468 = EDGE_CURVE('',#76469,#76471,#76473,.T.); +#76469 = VERTEX_POINT('',#76470); +#76470 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76471 = VERTEX_POINT('',#76472); +#76472 = CARTESIAN_POINT('',(5.8,-5.6792,1.568)); +#76473 = LINE('',#76474,#76475); +#76474 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76475 = VECTOR('',#76476,1.); +#76476 = DIRECTION('',(0.,0.,1.)); +#76477 = ORIENTED_EDGE('',*,*,#76478,.T.); +#76478 = EDGE_CURVE('',#76471,#76479,#76481,.T.); +#76479 = VERTEX_POINT('',#76480); +#76480 = CARTESIAN_POINT('',(5.55,-5.6792,1.568)); +#76481 = LINE('',#76482,#76483); +#76482 = CARTESIAN_POINT('',(5.8,-5.6792,1.568)); +#76483 = VECTOR('',#76484,1.); +#76484 = DIRECTION('',(-1.,0.,0.)); +#76485 = ORIENTED_EDGE('',*,*,#76486,.F.); +#76486 = EDGE_CURVE('',#76487,#76479,#76489,.T.); +#76487 = VERTEX_POINT('',#76488); +#76488 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76489 = LINE('',#76490,#76491); +#76490 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76491 = VECTOR('',#76492,1.); +#76492 = DIRECTION('',(0.,0.,1.)); +#76493 = ORIENTED_EDGE('',*,*,#76494,.F.); +#76494 = EDGE_CURVE('',#76469,#76487,#76495,.T.); +#76495 = LINE('',#76496,#76497); +#76496 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76497 = VECTOR('',#76498,1.); +#76498 = DIRECTION('',(-1.,0.,0.)); +#76499 = PLANE('',#76500); +#76500 = AXIS2_PLACEMENT_3D('',#76501,#76502,#76503); +#76501 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76502 = DIRECTION('',(0.,-1.,0.)); +#76503 = DIRECTION('',(-1.,0.,0.)); +#76504 = ADVANCED_FACE('',(#76505),#76530,.F.); +#76505 = FACE_BOUND('',#76506,.F.); +#76506 = EDGE_LOOP('',(#76507,#76508,#76516,#76524)); +#76507 = ORIENTED_EDGE('',*,*,#76486,.T.); +#76508 = ORIENTED_EDGE('',*,*,#76509,.T.); +#76509 = EDGE_CURVE('',#76479,#76510,#76512,.T.); +#76510 = VERTEX_POINT('',#76511); +#76511 = CARTESIAN_POINT('',(5.55,-8.0392,1.568)); +#76512 = LINE('',#76513,#76514); +#76513 = CARTESIAN_POINT('',(5.55,-5.6792,1.568)); +#76514 = VECTOR('',#76515,1.); +#76515 = DIRECTION('',(0.,-1.,0.)); +#76516 = ORIENTED_EDGE('',*,*,#76517,.F.); +#76517 = EDGE_CURVE('',#76518,#76510,#76520,.T.); +#76518 = VERTEX_POINT('',#76519); +#76519 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76520 = LINE('',#76521,#76522); +#76521 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76522 = VECTOR('',#76523,1.); +#76523 = DIRECTION('',(0.,0.,1.)); +#76524 = ORIENTED_EDGE('',*,*,#76525,.F.); +#76525 = EDGE_CURVE('',#76487,#76518,#76526,.T.); +#76526 = LINE('',#76527,#76528); +#76527 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76528 = VECTOR('',#76529,1.); +#76529 = DIRECTION('',(0.,-1.,0.)); +#76530 = PLANE('',#76531); +#76531 = AXIS2_PLACEMENT_3D('',#76532,#76533,#76534); +#76532 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76533 = DIRECTION('',(1.,0.,0.)); +#76534 = DIRECTION('',(0.,-1.,0.)); +#76535 = ADVANCED_FACE('',(#76536),#76561,.F.); +#76536 = FACE_BOUND('',#76537,.F.); +#76537 = EDGE_LOOP('',(#76538,#76539,#76547,#76555)); +#76538 = ORIENTED_EDGE('',*,*,#76517,.T.); +#76539 = ORIENTED_EDGE('',*,*,#76540,.T.); +#76540 = EDGE_CURVE('',#76510,#76541,#76543,.T.); +#76541 = VERTEX_POINT('',#76542); +#76542 = CARTESIAN_POINT('',(5.8,-8.0392,1.568)); +#76543 = LINE('',#76544,#76545); +#76544 = CARTESIAN_POINT('',(5.55,-8.0392,1.568)); +#76545 = VECTOR('',#76546,1.); +#76546 = DIRECTION('',(1.,0.,0.)); +#76547 = ORIENTED_EDGE('',*,*,#76548,.F.); +#76548 = EDGE_CURVE('',#76549,#76541,#76551,.T.); +#76549 = VERTEX_POINT('',#76550); +#76550 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76551 = LINE('',#76552,#76553); +#76552 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76553 = VECTOR('',#76554,1.); +#76554 = DIRECTION('',(0.,0.,1.)); +#76555 = ORIENTED_EDGE('',*,*,#76556,.F.); +#76556 = EDGE_CURVE('',#76518,#76549,#76557,.T.); +#76557 = LINE('',#76558,#76559); +#76558 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76559 = VECTOR('',#76560,1.); +#76560 = DIRECTION('',(1.,0.,0.)); +#76561 = PLANE('',#76562); +#76562 = AXIS2_PLACEMENT_3D('',#76563,#76564,#76565); +#76563 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76564 = DIRECTION('',(0.,1.,0.)); +#76565 = DIRECTION('',(1.,0.,0.)); +#76566 = ADVANCED_FACE('',(#76567),#76583,.F.); +#76567 = FACE_BOUND('',#76568,.F.); +#76568 = EDGE_LOOP('',(#76569,#76570,#76576,#76577)); +#76569 = ORIENTED_EDGE('',*,*,#76548,.T.); +#76570 = ORIENTED_EDGE('',*,*,#76571,.T.); +#76571 = EDGE_CURVE('',#76541,#76471,#76572,.T.); +#76572 = LINE('',#76573,#76574); +#76573 = CARTESIAN_POINT('',(5.8,-8.0392,1.568)); +#76574 = VECTOR('',#76575,1.); +#76575 = DIRECTION('',(0.,1.,0.)); +#76576 = ORIENTED_EDGE('',*,*,#76468,.F.); +#76577 = ORIENTED_EDGE('',*,*,#76578,.F.); +#76578 = EDGE_CURVE('',#76549,#76469,#76579,.T.); +#76579 = LINE('',#76580,#76581); +#76580 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76581 = VECTOR('',#76582,1.); +#76582 = DIRECTION('',(0.,1.,0.)); +#76583 = PLANE('',#76584); +#76584 = AXIS2_PLACEMENT_3D('',#76585,#76586,#76587); +#76585 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76586 = DIRECTION('',(-1.,0.,0.)); +#76587 = DIRECTION('',(0.,1.,0.)); +#76588 = ADVANCED_FACE('',(#76589),#76595,.F.); +#76589 = FACE_BOUND('',#76590,.F.); +#76590 = EDGE_LOOP('',(#76591,#76592,#76593,#76594)); +#76591 = ORIENTED_EDGE('',*,*,#76494,.T.); +#76592 = ORIENTED_EDGE('',*,*,#76525,.T.); +#76593 = ORIENTED_EDGE('',*,*,#76556,.T.); +#76594 = ORIENTED_EDGE('',*,*,#76578,.T.); +#76595 = PLANE('',#76596); +#76596 = AXIS2_PLACEMENT_3D('',#76597,#76598,#76599); +#76597 = CARTESIAN_POINT('',(5.675,-6.8592,1.519)); +#76598 = DIRECTION('',(0.,0.,1.)); +#76599 = DIRECTION('',(1.,0.,-0.)); +#76600 = ADVANCED_FACE('',(#76601),#76607,.T.); +#76601 = FACE_BOUND('',#76602,.T.); +#76602 = EDGE_LOOP('',(#76603,#76604,#76605,#76606)); +#76603 = ORIENTED_EDGE('',*,*,#76478,.T.); +#76604 = ORIENTED_EDGE('',*,*,#76509,.T.); +#76605 = ORIENTED_EDGE('',*,*,#76540,.T.); +#76606 = ORIENTED_EDGE('',*,*,#76571,.T.); +#76607 = PLANE('',#76608); +#76608 = AXIS2_PLACEMENT_3D('',#76609,#76610,#76611); +#76609 = CARTESIAN_POINT('',(5.675,-6.8592,1.568)); +#76610 = DIRECTION('',(0.,0.,1.)); +#76611 = DIRECTION('',(1.,0.,-0.)); +#76612 = MANIFOLD_SOLID_BREP('',#76613); +#76613 = CLOSED_SHELL('',(#76614,#76654,#76685,#76716,#76738,#76750)); +#76614 = ADVANCED_FACE('',(#76615),#76649,.T.); +#76615 = FACE_BOUND('',#76616,.T.); +#76616 = EDGE_LOOP('',(#76617,#76627,#76635,#76643)); +#76617 = ORIENTED_EDGE('',*,*,#76618,.T.); +#76618 = EDGE_CURVE('',#76619,#76621,#76623,.T.); +#76619 = VERTEX_POINT('',#76620); +#76620 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76621 = VERTEX_POINT('',#76622); +#76622 = CARTESIAN_POINT('',(2.1,-5.6792,2.219)); +#76623 = LINE('',#76624,#76625); +#76624 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76625 = VECTOR('',#76626,1.); +#76626 = DIRECTION('',(0.,0.,1.)); +#76627 = ORIENTED_EDGE('',*,*,#76628,.T.); +#76628 = EDGE_CURVE('',#76621,#76629,#76631,.T.); +#76629 = VERTEX_POINT('',#76630); +#76630 = CARTESIAN_POINT('',(2.35,-5.6792,2.219)); +#76631 = LINE('',#76632,#76633); +#76632 = CARTESIAN_POINT('',(2.1,-5.6792,2.219)); +#76633 = VECTOR('',#76634,1.); +#76634 = DIRECTION('',(1.,0.,0.)); +#76635 = ORIENTED_EDGE('',*,*,#76636,.F.); +#76636 = EDGE_CURVE('',#76637,#76629,#76639,.T.); +#76637 = VERTEX_POINT('',#76638); +#76638 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76639 = LINE('',#76640,#76641); +#76640 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76641 = VECTOR('',#76642,1.); +#76642 = DIRECTION('',(0.,0.,1.)); +#76643 = ORIENTED_EDGE('',*,*,#76644,.F.); +#76644 = EDGE_CURVE('',#76619,#76637,#76645,.T.); +#76645 = LINE('',#76646,#76647); +#76646 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76647 = VECTOR('',#76648,1.); +#76648 = DIRECTION('',(1.,0.,0.)); +#76649 = PLANE('',#76650); +#76650 = AXIS2_PLACEMENT_3D('',#76651,#76652,#76653); +#76651 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76652 = DIRECTION('',(0.,1.,0.)); +#76653 = DIRECTION('',(1.,0.,0.)); +#76654 = ADVANCED_FACE('',(#76655),#76680,.T.); +#76655 = FACE_BOUND('',#76656,.T.); +#76656 = EDGE_LOOP('',(#76657,#76658,#76666,#76674)); +#76657 = ORIENTED_EDGE('',*,*,#76636,.T.); +#76658 = ORIENTED_EDGE('',*,*,#76659,.T.); +#76659 = EDGE_CURVE('',#76629,#76660,#76662,.T.); +#76660 = VERTEX_POINT('',#76661); +#76661 = CARTESIAN_POINT('',(2.35,-7.6392,2.219)); +#76662 = LINE('',#76663,#76664); +#76663 = CARTESIAN_POINT('',(2.35,-5.6792,2.219)); +#76664 = VECTOR('',#76665,1.); +#76665 = DIRECTION('',(0.,-1.,0.)); +#76666 = ORIENTED_EDGE('',*,*,#76667,.F.); +#76667 = EDGE_CURVE('',#76668,#76660,#76670,.T.); +#76668 = VERTEX_POINT('',#76669); +#76669 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76670 = LINE('',#76671,#76672); +#76671 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76672 = VECTOR('',#76673,1.); +#76673 = DIRECTION('',(0.,0.,1.)); +#76674 = ORIENTED_EDGE('',*,*,#76675,.F.); +#76675 = EDGE_CURVE('',#76637,#76668,#76676,.T.); +#76676 = LINE('',#76677,#76678); +#76677 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76678 = VECTOR('',#76679,1.); +#76679 = DIRECTION('',(0.,-1.,0.)); +#76680 = PLANE('',#76681); +#76681 = AXIS2_PLACEMENT_3D('',#76682,#76683,#76684); +#76682 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76683 = DIRECTION('',(1.,0.,0.)); +#76684 = DIRECTION('',(0.,-1.,0.)); +#76685 = ADVANCED_FACE('',(#76686),#76711,.T.); +#76686 = FACE_BOUND('',#76687,.T.); +#76687 = EDGE_LOOP('',(#76688,#76689,#76697,#76705)); +#76688 = ORIENTED_EDGE('',*,*,#76667,.T.); +#76689 = ORIENTED_EDGE('',*,*,#76690,.T.); +#76690 = EDGE_CURVE('',#76660,#76691,#76693,.T.); +#76691 = VERTEX_POINT('',#76692); +#76692 = CARTESIAN_POINT('',(2.1,-7.6392,2.219)); +#76693 = LINE('',#76694,#76695); +#76694 = CARTESIAN_POINT('',(2.35,-7.6392,2.219)); +#76695 = VECTOR('',#76696,1.); +#76696 = DIRECTION('',(-1.,0.,0.)); +#76697 = ORIENTED_EDGE('',*,*,#76698,.F.); +#76698 = EDGE_CURVE('',#76699,#76691,#76701,.T.); +#76699 = VERTEX_POINT('',#76700); +#76700 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76701 = LINE('',#76702,#76703); +#76702 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76703 = VECTOR('',#76704,1.); +#76704 = DIRECTION('',(0.,0.,1.)); +#76705 = ORIENTED_EDGE('',*,*,#76706,.F.); +#76706 = EDGE_CURVE('',#76668,#76699,#76707,.T.); +#76707 = LINE('',#76708,#76709); +#76708 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76709 = VECTOR('',#76710,1.); +#76710 = DIRECTION('',(-1.,0.,0.)); +#76711 = PLANE('',#76712); +#76712 = AXIS2_PLACEMENT_3D('',#76713,#76714,#76715); +#76713 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76714 = DIRECTION('',(0.,-1.,0.)); +#76715 = DIRECTION('',(-1.,0.,0.)); +#76716 = ADVANCED_FACE('',(#76717),#76733,.T.); +#76717 = FACE_BOUND('',#76718,.T.); +#76718 = EDGE_LOOP('',(#76719,#76720,#76726,#76727)); +#76719 = ORIENTED_EDGE('',*,*,#76698,.T.); +#76720 = ORIENTED_EDGE('',*,*,#76721,.T.); +#76721 = EDGE_CURVE('',#76691,#76621,#76722,.T.); +#76722 = LINE('',#76723,#76724); +#76723 = CARTESIAN_POINT('',(2.1,-7.6392,2.219)); +#76724 = VECTOR('',#76725,1.); +#76725 = DIRECTION('',(0.,1.,0.)); +#76726 = ORIENTED_EDGE('',*,*,#76618,.F.); +#76727 = ORIENTED_EDGE('',*,*,#76728,.F.); +#76728 = EDGE_CURVE('',#76699,#76619,#76729,.T.); +#76729 = LINE('',#76730,#76731); +#76730 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76731 = VECTOR('',#76732,1.); +#76732 = DIRECTION('',(0.,1.,0.)); +#76733 = PLANE('',#76734); +#76734 = AXIS2_PLACEMENT_3D('',#76735,#76736,#76737); +#76735 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76736 = DIRECTION('',(-1.,0.,0.)); +#76737 = DIRECTION('',(0.,1.,0.)); +#76738 = ADVANCED_FACE('',(#76739),#76745,.F.); +#76739 = FACE_BOUND('',#76740,.T.); +#76740 = EDGE_LOOP('',(#76741,#76742,#76743,#76744)); +#76741 = ORIENTED_EDGE('',*,*,#76644,.T.); +#76742 = ORIENTED_EDGE('',*,*,#76675,.T.); +#76743 = ORIENTED_EDGE('',*,*,#76706,.T.); +#76744 = ORIENTED_EDGE('',*,*,#76728,.T.); +#76745 = PLANE('',#76746); +#76746 = AXIS2_PLACEMENT_3D('',#76747,#76748,#76749); +#76747 = CARTESIAN_POINT('',(2.225,-6.6592,2.17)); +#76748 = DIRECTION('',(0.,0.,1.)); +#76749 = DIRECTION('',(1.,0.,-0.)); +#76750 = ADVANCED_FACE('',(#76751),#76757,.T.); +#76751 = FACE_BOUND('',#76752,.F.); +#76752 = EDGE_LOOP('',(#76753,#76754,#76755,#76756)); +#76753 = ORIENTED_EDGE('',*,*,#76628,.T.); +#76754 = ORIENTED_EDGE('',*,*,#76659,.T.); +#76755 = ORIENTED_EDGE('',*,*,#76690,.T.); +#76756 = ORIENTED_EDGE('',*,*,#76721,.T.); +#76757 = PLANE('',#76758); +#76758 = AXIS2_PLACEMENT_3D('',#76759,#76760,#76761); +#76759 = CARTESIAN_POINT('',(2.225,-6.6592,2.219)); +#76760 = DIRECTION('',(0.,0.,1.)); +#76761 = DIRECTION('',(1.,0.,-0.)); +#76762 = MANIFOLD_SOLID_BREP('',#76763); +#76763 = CLOSED_SHELL('',(#76764,#76804,#76835,#76866,#76888,#76900)); +#76764 = ADVANCED_FACE('',(#76765),#76799,.T.); +#76765 = FACE_BOUND('',#76766,.T.); +#76766 = EDGE_LOOP('',(#76767,#76777,#76785,#76793)); +#76767 = ORIENTED_EDGE('',*,*,#76768,.T.); +#76768 = EDGE_CURVE('',#76769,#76771,#76773,.T.); +#76769 = VERTEX_POINT('',#76770); +#76770 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76771 = VERTEX_POINT('',#76772); +#76772 = CARTESIAN_POINT('',(2.1,-5.6792,1.568)); +#76773 = LINE('',#76774,#76775); +#76774 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76775 = VECTOR('',#76776,1.); +#76776 = DIRECTION('',(0.,0.,1.)); +#76777 = ORIENTED_EDGE('',*,*,#76778,.T.); +#76778 = EDGE_CURVE('',#76771,#76779,#76781,.T.); +#76779 = VERTEX_POINT('',#76780); +#76780 = CARTESIAN_POINT('',(2.35,-5.6792,1.568)); +#76781 = LINE('',#76782,#76783); +#76782 = CARTESIAN_POINT('',(2.1,-5.6792,1.568)); +#76783 = VECTOR('',#76784,1.); +#76784 = DIRECTION('',(1.,0.,0.)); +#76785 = ORIENTED_EDGE('',*,*,#76786,.F.); +#76786 = EDGE_CURVE('',#76787,#76779,#76789,.T.); +#76787 = VERTEX_POINT('',#76788); +#76788 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76789 = LINE('',#76790,#76791); +#76790 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76791 = VECTOR('',#76792,1.); +#76792 = DIRECTION('',(0.,0.,1.)); +#76793 = ORIENTED_EDGE('',*,*,#76794,.F.); +#76794 = EDGE_CURVE('',#76769,#76787,#76795,.T.); +#76795 = LINE('',#76796,#76797); +#76796 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76797 = VECTOR('',#76798,1.); +#76798 = DIRECTION('',(1.,0.,0.)); +#76799 = PLANE('',#76800); +#76800 = AXIS2_PLACEMENT_3D('',#76801,#76802,#76803); +#76801 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76802 = DIRECTION('',(0.,1.,0.)); +#76803 = DIRECTION('',(1.,0.,0.)); +#76804 = ADVANCED_FACE('',(#76805),#76830,.T.); +#76805 = FACE_BOUND('',#76806,.T.); +#76806 = EDGE_LOOP('',(#76807,#76808,#76816,#76824)); +#76807 = ORIENTED_EDGE('',*,*,#76786,.T.); +#76808 = ORIENTED_EDGE('',*,*,#76809,.T.); +#76809 = EDGE_CURVE('',#76779,#76810,#76812,.T.); +#76810 = VERTEX_POINT('',#76811); +#76811 = CARTESIAN_POINT('',(2.35,-7.6392,1.568)); +#76812 = LINE('',#76813,#76814); +#76813 = CARTESIAN_POINT('',(2.35,-5.6792,1.568)); +#76814 = VECTOR('',#76815,1.); +#76815 = DIRECTION('',(0.,-1.,0.)); +#76816 = ORIENTED_EDGE('',*,*,#76817,.F.); +#76817 = EDGE_CURVE('',#76818,#76810,#76820,.T.); +#76818 = VERTEX_POINT('',#76819); +#76819 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76820 = LINE('',#76821,#76822); +#76821 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76822 = VECTOR('',#76823,1.); +#76823 = DIRECTION('',(0.,0.,1.)); +#76824 = ORIENTED_EDGE('',*,*,#76825,.F.); +#76825 = EDGE_CURVE('',#76787,#76818,#76826,.T.); +#76826 = LINE('',#76827,#76828); +#76827 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76828 = VECTOR('',#76829,1.); +#76829 = DIRECTION('',(0.,-1.,0.)); +#76830 = PLANE('',#76831); +#76831 = AXIS2_PLACEMENT_3D('',#76832,#76833,#76834); +#76832 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76833 = DIRECTION('',(1.,0.,0.)); +#76834 = DIRECTION('',(0.,-1.,0.)); +#76835 = ADVANCED_FACE('',(#76836),#76861,.T.); +#76836 = FACE_BOUND('',#76837,.T.); +#76837 = EDGE_LOOP('',(#76838,#76839,#76847,#76855)); +#76838 = ORIENTED_EDGE('',*,*,#76817,.T.); +#76839 = ORIENTED_EDGE('',*,*,#76840,.T.); +#76840 = EDGE_CURVE('',#76810,#76841,#76843,.T.); +#76841 = VERTEX_POINT('',#76842); +#76842 = CARTESIAN_POINT('',(2.1,-7.6392,1.568)); +#76843 = LINE('',#76844,#76845); +#76844 = CARTESIAN_POINT('',(2.35,-7.6392,1.568)); +#76845 = VECTOR('',#76846,1.); +#76846 = DIRECTION('',(-1.,0.,0.)); +#76847 = ORIENTED_EDGE('',*,*,#76848,.F.); +#76848 = EDGE_CURVE('',#76849,#76841,#76851,.T.); +#76849 = VERTEX_POINT('',#76850); +#76850 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76851 = LINE('',#76852,#76853); +#76852 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76853 = VECTOR('',#76854,1.); +#76854 = DIRECTION('',(0.,0.,1.)); +#76855 = ORIENTED_EDGE('',*,*,#76856,.F.); +#76856 = EDGE_CURVE('',#76818,#76849,#76857,.T.); +#76857 = LINE('',#76858,#76859); +#76858 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76859 = VECTOR('',#76860,1.); +#76860 = DIRECTION('',(-1.,0.,0.)); +#76861 = PLANE('',#76862); +#76862 = AXIS2_PLACEMENT_3D('',#76863,#76864,#76865); +#76863 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76864 = DIRECTION('',(0.,-1.,0.)); +#76865 = DIRECTION('',(-1.,0.,0.)); +#76866 = ADVANCED_FACE('',(#76867),#76883,.T.); +#76867 = FACE_BOUND('',#76868,.T.); +#76868 = EDGE_LOOP('',(#76869,#76870,#76876,#76877)); +#76869 = ORIENTED_EDGE('',*,*,#76848,.T.); +#76870 = ORIENTED_EDGE('',*,*,#76871,.T.); +#76871 = EDGE_CURVE('',#76841,#76771,#76872,.T.); +#76872 = LINE('',#76873,#76874); +#76873 = CARTESIAN_POINT('',(2.1,-7.6392,1.568)); +#76874 = VECTOR('',#76875,1.); +#76875 = DIRECTION('',(0.,1.,0.)); +#76876 = ORIENTED_EDGE('',*,*,#76768,.F.); +#76877 = ORIENTED_EDGE('',*,*,#76878,.F.); +#76878 = EDGE_CURVE('',#76849,#76769,#76879,.T.); +#76879 = LINE('',#76880,#76881); +#76880 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76881 = VECTOR('',#76882,1.); +#76882 = DIRECTION('',(0.,1.,0.)); +#76883 = PLANE('',#76884); +#76884 = AXIS2_PLACEMENT_3D('',#76885,#76886,#76887); +#76885 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76886 = DIRECTION('',(-1.,0.,0.)); +#76887 = DIRECTION('',(0.,1.,0.)); +#76888 = ADVANCED_FACE('',(#76889),#76895,.F.); +#76889 = FACE_BOUND('',#76890,.T.); +#76890 = EDGE_LOOP('',(#76891,#76892,#76893,#76894)); +#76891 = ORIENTED_EDGE('',*,*,#76794,.T.); +#76892 = ORIENTED_EDGE('',*,*,#76825,.T.); +#76893 = ORIENTED_EDGE('',*,*,#76856,.T.); +#76894 = ORIENTED_EDGE('',*,*,#76878,.T.); +#76895 = PLANE('',#76896); +#76896 = AXIS2_PLACEMENT_3D('',#76897,#76898,#76899); +#76897 = CARTESIAN_POINT('',(2.225,-6.6592,1.519)); +#76898 = DIRECTION('',(0.,0.,1.)); +#76899 = DIRECTION('',(1.,0.,-0.)); +#76900 = ADVANCED_FACE('',(#76901),#76907,.T.); +#76901 = FACE_BOUND('',#76902,.F.); +#76902 = EDGE_LOOP('',(#76903,#76904,#76905,#76906)); +#76903 = ORIENTED_EDGE('',*,*,#76778,.T.); +#76904 = ORIENTED_EDGE('',*,*,#76809,.T.); +#76905 = ORIENTED_EDGE('',*,*,#76840,.T.); +#76906 = ORIENTED_EDGE('',*,*,#76871,.T.); +#76907 = PLANE('',#76908); +#76908 = AXIS2_PLACEMENT_3D('',#76909,#76910,#76911); +#76909 = CARTESIAN_POINT('',(2.225,-6.6592,1.568)); +#76910 = DIRECTION('',(0.,0.,1.)); +#76911 = DIRECTION('',(1.,0.,-0.)); +#76912 = MANIFOLD_SOLID_BREP('',#76913); +#76913 = CLOSED_SHELL('',(#76914,#76954,#76985,#77016,#77038,#77050)); +#76914 = ADVANCED_FACE('',(#76915),#76949,.T.); +#76915 = FACE_BOUND('',#76916,.T.); +#76916 = EDGE_LOOP('',(#76917,#76927,#76935,#76943)); +#76917 = ORIENTED_EDGE('',*,*,#76918,.T.); +#76918 = EDGE_CURVE('',#76919,#76921,#76923,.T.); +#76919 = VERTEX_POINT('',#76920); +#76920 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76921 = VERTEX_POINT('',#76922); +#76922 = CARTESIAN_POINT('',(2.6,-5.6792,2.219)); +#76923 = LINE('',#76924,#76925); +#76924 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76925 = VECTOR('',#76926,1.); +#76926 = DIRECTION('',(0.,0.,1.)); +#76927 = ORIENTED_EDGE('',*,*,#76928,.T.); +#76928 = EDGE_CURVE('',#76921,#76929,#76931,.T.); +#76929 = VERTEX_POINT('',#76930); +#76930 = CARTESIAN_POINT('',(2.85,-5.6792,2.219)); +#76931 = LINE('',#76932,#76933); +#76932 = CARTESIAN_POINT('',(2.6,-5.6792,2.219)); +#76933 = VECTOR('',#76934,1.); +#76934 = DIRECTION('',(1.,0.,0.)); +#76935 = ORIENTED_EDGE('',*,*,#76936,.F.); +#76936 = EDGE_CURVE('',#76937,#76929,#76939,.T.); +#76937 = VERTEX_POINT('',#76938); +#76938 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76939 = LINE('',#76940,#76941); +#76940 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76941 = VECTOR('',#76942,1.); +#76942 = DIRECTION('',(0.,0.,1.)); +#76943 = ORIENTED_EDGE('',*,*,#76944,.F.); +#76944 = EDGE_CURVE('',#76919,#76937,#76945,.T.); +#76945 = LINE('',#76946,#76947); +#76946 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76947 = VECTOR('',#76948,1.); +#76948 = DIRECTION('',(1.,0.,0.)); +#76949 = PLANE('',#76950); +#76950 = AXIS2_PLACEMENT_3D('',#76951,#76952,#76953); +#76951 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76952 = DIRECTION('',(0.,1.,0.)); +#76953 = DIRECTION('',(1.,0.,0.)); +#76954 = ADVANCED_FACE('',(#76955),#76980,.T.); +#76955 = FACE_BOUND('',#76956,.T.); +#76956 = EDGE_LOOP('',(#76957,#76958,#76966,#76974)); +#76957 = ORIENTED_EDGE('',*,*,#76936,.T.); +#76958 = ORIENTED_EDGE('',*,*,#76959,.T.); +#76959 = EDGE_CURVE('',#76929,#76960,#76962,.T.); +#76960 = VERTEX_POINT('',#76961); +#76961 = CARTESIAN_POINT('',(2.85,-7.6392,2.219)); +#76962 = LINE('',#76963,#76964); +#76963 = CARTESIAN_POINT('',(2.85,-5.6792,2.219)); +#76964 = VECTOR('',#76965,1.); +#76965 = DIRECTION('',(0.,-1.,0.)); +#76966 = ORIENTED_EDGE('',*,*,#76967,.F.); +#76967 = EDGE_CURVE('',#76968,#76960,#76970,.T.); +#76968 = VERTEX_POINT('',#76969); +#76969 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#76970 = LINE('',#76971,#76972); +#76971 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#76972 = VECTOR('',#76973,1.); +#76973 = DIRECTION('',(0.,0.,1.)); +#76974 = ORIENTED_EDGE('',*,*,#76975,.F.); +#76975 = EDGE_CURVE('',#76937,#76968,#76976,.T.); +#76976 = LINE('',#76977,#76978); +#76977 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76978 = VECTOR('',#76979,1.); +#76979 = DIRECTION('',(0.,-1.,0.)); +#76980 = PLANE('',#76981); +#76981 = AXIS2_PLACEMENT_3D('',#76982,#76983,#76984); +#76982 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76983 = DIRECTION('',(1.,0.,0.)); +#76984 = DIRECTION('',(0.,-1.,0.)); +#76985 = ADVANCED_FACE('',(#76986),#77011,.T.); +#76986 = FACE_BOUND('',#76987,.T.); +#76987 = EDGE_LOOP('',(#76988,#76989,#76997,#77005)); +#76988 = ORIENTED_EDGE('',*,*,#76967,.T.); +#76989 = ORIENTED_EDGE('',*,*,#76990,.T.); +#76990 = EDGE_CURVE('',#76960,#76991,#76993,.T.); +#76991 = VERTEX_POINT('',#76992); +#76992 = CARTESIAN_POINT('',(2.6,-7.6392,2.219)); +#76993 = LINE('',#76994,#76995); +#76994 = CARTESIAN_POINT('',(2.85,-7.6392,2.219)); +#76995 = VECTOR('',#76996,1.); +#76996 = DIRECTION('',(-1.,0.,0.)); +#76997 = ORIENTED_EDGE('',*,*,#76998,.F.); +#76998 = EDGE_CURVE('',#76999,#76991,#77001,.T.); +#76999 = VERTEX_POINT('',#77000); +#77000 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77001 = LINE('',#77002,#77003); +#77002 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77003 = VECTOR('',#77004,1.); +#77004 = DIRECTION('',(0.,0.,1.)); +#77005 = ORIENTED_EDGE('',*,*,#77006,.F.); +#77006 = EDGE_CURVE('',#76968,#76999,#77007,.T.); +#77007 = LINE('',#77008,#77009); +#77008 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#77009 = VECTOR('',#77010,1.); +#77010 = DIRECTION('',(-1.,0.,0.)); +#77011 = PLANE('',#77012); +#77012 = AXIS2_PLACEMENT_3D('',#77013,#77014,#77015); +#77013 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#77014 = DIRECTION('',(0.,-1.,0.)); +#77015 = DIRECTION('',(-1.,0.,0.)); +#77016 = ADVANCED_FACE('',(#77017),#77033,.T.); +#77017 = FACE_BOUND('',#77018,.T.); +#77018 = EDGE_LOOP('',(#77019,#77020,#77026,#77027)); +#77019 = ORIENTED_EDGE('',*,*,#76998,.T.); +#77020 = ORIENTED_EDGE('',*,*,#77021,.T.); +#77021 = EDGE_CURVE('',#76991,#76921,#77022,.T.); +#77022 = LINE('',#77023,#77024); +#77023 = CARTESIAN_POINT('',(2.6,-7.6392,2.219)); +#77024 = VECTOR('',#77025,1.); +#77025 = DIRECTION('',(0.,1.,0.)); +#77026 = ORIENTED_EDGE('',*,*,#76918,.F.); +#77027 = ORIENTED_EDGE('',*,*,#77028,.F.); +#77028 = EDGE_CURVE('',#76999,#76919,#77029,.T.); +#77029 = LINE('',#77030,#77031); +#77030 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77031 = VECTOR('',#77032,1.); +#77032 = DIRECTION('',(0.,1.,0.)); +#77033 = PLANE('',#77034); +#77034 = AXIS2_PLACEMENT_3D('',#77035,#77036,#77037); +#77035 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77036 = DIRECTION('',(-1.,0.,0.)); +#77037 = DIRECTION('',(0.,1.,0.)); +#77038 = ADVANCED_FACE('',(#77039),#77045,.F.); +#77039 = FACE_BOUND('',#77040,.T.); +#77040 = EDGE_LOOP('',(#77041,#77042,#77043,#77044)); +#77041 = ORIENTED_EDGE('',*,*,#76944,.T.); +#77042 = ORIENTED_EDGE('',*,*,#76975,.T.); +#77043 = ORIENTED_EDGE('',*,*,#77006,.T.); +#77044 = ORIENTED_EDGE('',*,*,#77028,.T.); +#77045 = PLANE('',#77046); +#77046 = AXIS2_PLACEMENT_3D('',#77047,#77048,#77049); +#77047 = CARTESIAN_POINT('',(2.725,-6.6592,2.17)); +#77048 = DIRECTION('',(0.,0.,1.)); +#77049 = DIRECTION('',(1.,0.,-0.)); +#77050 = ADVANCED_FACE('',(#77051),#77057,.T.); +#77051 = FACE_BOUND('',#77052,.F.); +#77052 = EDGE_LOOP('',(#77053,#77054,#77055,#77056)); +#77053 = ORIENTED_EDGE('',*,*,#76928,.T.); +#77054 = ORIENTED_EDGE('',*,*,#76959,.T.); +#77055 = ORIENTED_EDGE('',*,*,#76990,.T.); +#77056 = ORIENTED_EDGE('',*,*,#77021,.T.); +#77057 = PLANE('',#77058); +#77058 = AXIS2_PLACEMENT_3D('',#77059,#77060,#77061); +#77059 = CARTESIAN_POINT('',(2.725,-6.6592,2.219)); +#77060 = DIRECTION('',(0.,0.,1.)); +#77061 = DIRECTION('',(1.,0.,-0.)); +#77062 = MANIFOLD_SOLID_BREP('',#77063); +#77063 = CLOSED_SHELL('',(#77064,#77104,#77135,#77166,#77188,#77200)); +#77064 = ADVANCED_FACE('',(#77065),#77099,.T.); +#77065 = FACE_BOUND('',#77066,.T.); +#77066 = EDGE_LOOP('',(#77067,#77077,#77085,#77093)); +#77067 = ORIENTED_EDGE('',*,*,#77068,.T.); +#77068 = EDGE_CURVE('',#77069,#77071,#77073,.T.); +#77069 = VERTEX_POINT('',#77070); +#77070 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77071 = VERTEX_POINT('',#77072); +#77072 = CARTESIAN_POINT('',(2.6,-5.6792,1.568)); +#77073 = LINE('',#77074,#77075); +#77074 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77075 = VECTOR('',#77076,1.); +#77076 = DIRECTION('',(0.,0.,1.)); +#77077 = ORIENTED_EDGE('',*,*,#77078,.T.); +#77078 = EDGE_CURVE('',#77071,#77079,#77081,.T.); +#77079 = VERTEX_POINT('',#77080); +#77080 = CARTESIAN_POINT('',(2.85,-5.6792,1.568)); +#77081 = LINE('',#77082,#77083); +#77082 = CARTESIAN_POINT('',(2.6,-5.6792,1.568)); +#77083 = VECTOR('',#77084,1.); +#77084 = DIRECTION('',(1.,0.,0.)); +#77085 = ORIENTED_EDGE('',*,*,#77086,.F.); +#77086 = EDGE_CURVE('',#77087,#77079,#77089,.T.); +#77087 = VERTEX_POINT('',#77088); +#77088 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77089 = LINE('',#77090,#77091); +#77090 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77091 = VECTOR('',#77092,1.); +#77092 = DIRECTION('',(0.,0.,1.)); +#77093 = ORIENTED_EDGE('',*,*,#77094,.F.); +#77094 = EDGE_CURVE('',#77069,#77087,#77095,.T.); +#77095 = LINE('',#77096,#77097); +#77096 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77097 = VECTOR('',#77098,1.); +#77098 = DIRECTION('',(1.,0.,0.)); +#77099 = PLANE('',#77100); +#77100 = AXIS2_PLACEMENT_3D('',#77101,#77102,#77103); +#77101 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77102 = DIRECTION('',(0.,1.,0.)); +#77103 = DIRECTION('',(1.,0.,0.)); +#77104 = ADVANCED_FACE('',(#77105),#77130,.T.); +#77105 = FACE_BOUND('',#77106,.T.); +#77106 = EDGE_LOOP('',(#77107,#77108,#77116,#77124)); +#77107 = ORIENTED_EDGE('',*,*,#77086,.T.); +#77108 = ORIENTED_EDGE('',*,*,#77109,.T.); +#77109 = EDGE_CURVE('',#77079,#77110,#77112,.T.); +#77110 = VERTEX_POINT('',#77111); +#77111 = CARTESIAN_POINT('',(2.85,-7.6392,1.568)); +#77112 = LINE('',#77113,#77114); +#77113 = CARTESIAN_POINT('',(2.85,-5.6792,1.568)); +#77114 = VECTOR('',#77115,1.); +#77115 = DIRECTION('',(0.,-1.,0.)); +#77116 = ORIENTED_EDGE('',*,*,#77117,.F.); +#77117 = EDGE_CURVE('',#77118,#77110,#77120,.T.); +#77118 = VERTEX_POINT('',#77119); +#77119 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77120 = LINE('',#77121,#77122); +#77121 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77122 = VECTOR('',#77123,1.); +#77123 = DIRECTION('',(0.,0.,1.)); +#77124 = ORIENTED_EDGE('',*,*,#77125,.F.); +#77125 = EDGE_CURVE('',#77087,#77118,#77126,.T.); +#77126 = LINE('',#77127,#77128); +#77127 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77128 = VECTOR('',#77129,1.); +#77129 = DIRECTION('',(0.,-1.,0.)); +#77130 = PLANE('',#77131); +#77131 = AXIS2_PLACEMENT_3D('',#77132,#77133,#77134); +#77132 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77133 = DIRECTION('',(1.,0.,0.)); +#77134 = DIRECTION('',(0.,-1.,0.)); +#77135 = ADVANCED_FACE('',(#77136),#77161,.T.); +#77136 = FACE_BOUND('',#77137,.T.); +#77137 = EDGE_LOOP('',(#77138,#77139,#77147,#77155)); +#77138 = ORIENTED_EDGE('',*,*,#77117,.T.); +#77139 = ORIENTED_EDGE('',*,*,#77140,.T.); +#77140 = EDGE_CURVE('',#77110,#77141,#77143,.T.); +#77141 = VERTEX_POINT('',#77142); +#77142 = CARTESIAN_POINT('',(2.6,-7.6392,1.568)); +#77143 = LINE('',#77144,#77145); +#77144 = CARTESIAN_POINT('',(2.85,-7.6392,1.568)); +#77145 = VECTOR('',#77146,1.); +#77146 = DIRECTION('',(-1.,0.,0.)); +#77147 = ORIENTED_EDGE('',*,*,#77148,.F.); +#77148 = EDGE_CURVE('',#77149,#77141,#77151,.T.); +#77149 = VERTEX_POINT('',#77150); +#77150 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77151 = LINE('',#77152,#77153); +#77152 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77153 = VECTOR('',#77154,1.); +#77154 = DIRECTION('',(0.,0.,1.)); +#77155 = ORIENTED_EDGE('',*,*,#77156,.F.); +#77156 = EDGE_CURVE('',#77118,#77149,#77157,.T.); +#77157 = LINE('',#77158,#77159); +#77158 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77159 = VECTOR('',#77160,1.); +#77160 = DIRECTION('',(-1.,0.,0.)); +#77161 = PLANE('',#77162); +#77162 = AXIS2_PLACEMENT_3D('',#77163,#77164,#77165); +#77163 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77164 = DIRECTION('',(0.,-1.,0.)); +#77165 = DIRECTION('',(-1.,0.,0.)); +#77166 = ADVANCED_FACE('',(#77167),#77183,.T.); +#77167 = FACE_BOUND('',#77168,.T.); +#77168 = EDGE_LOOP('',(#77169,#77170,#77176,#77177)); +#77169 = ORIENTED_EDGE('',*,*,#77148,.T.); +#77170 = ORIENTED_EDGE('',*,*,#77171,.T.); +#77171 = EDGE_CURVE('',#77141,#77071,#77172,.T.); +#77172 = LINE('',#77173,#77174); +#77173 = CARTESIAN_POINT('',(2.6,-7.6392,1.568)); +#77174 = VECTOR('',#77175,1.); +#77175 = DIRECTION('',(0.,1.,0.)); +#77176 = ORIENTED_EDGE('',*,*,#77068,.F.); +#77177 = ORIENTED_EDGE('',*,*,#77178,.F.); +#77178 = EDGE_CURVE('',#77149,#77069,#77179,.T.); +#77179 = LINE('',#77180,#77181); +#77180 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77181 = VECTOR('',#77182,1.); +#77182 = DIRECTION('',(0.,1.,0.)); +#77183 = PLANE('',#77184); +#77184 = AXIS2_PLACEMENT_3D('',#77185,#77186,#77187); +#77185 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77186 = DIRECTION('',(-1.,0.,0.)); +#77187 = DIRECTION('',(0.,1.,0.)); +#77188 = ADVANCED_FACE('',(#77189),#77195,.F.); +#77189 = FACE_BOUND('',#77190,.T.); +#77190 = EDGE_LOOP('',(#77191,#77192,#77193,#77194)); +#77191 = ORIENTED_EDGE('',*,*,#77094,.T.); +#77192 = ORIENTED_EDGE('',*,*,#77125,.T.); +#77193 = ORIENTED_EDGE('',*,*,#77156,.T.); +#77194 = ORIENTED_EDGE('',*,*,#77178,.T.); +#77195 = PLANE('',#77196); +#77196 = AXIS2_PLACEMENT_3D('',#77197,#77198,#77199); +#77197 = CARTESIAN_POINT('',(2.725,-6.6592,1.519)); +#77198 = DIRECTION('',(0.,0.,1.)); +#77199 = DIRECTION('',(1.,0.,-0.)); +#77200 = ADVANCED_FACE('',(#77201),#77207,.T.); +#77201 = FACE_BOUND('',#77202,.F.); +#77202 = EDGE_LOOP('',(#77203,#77204,#77205,#77206)); +#77203 = ORIENTED_EDGE('',*,*,#77078,.T.); +#77204 = ORIENTED_EDGE('',*,*,#77109,.T.); +#77205 = ORIENTED_EDGE('',*,*,#77140,.T.); +#77206 = ORIENTED_EDGE('',*,*,#77171,.T.); +#77207 = PLANE('',#77208); +#77208 = AXIS2_PLACEMENT_3D('',#77209,#77210,#77211); +#77209 = CARTESIAN_POINT('',(2.725,-6.6592,1.568)); +#77210 = DIRECTION('',(0.,0.,1.)); +#77211 = DIRECTION('',(1.,0.,-0.)); +#77212 = MANIFOLD_SOLID_BREP('',#77213); +#77213 = CLOSED_SHELL('',(#77214,#77254,#77285,#77316,#77338,#77350)); +#77214 = ADVANCED_FACE('',(#77215),#77249,.T.); +#77215 = FACE_BOUND('',#77216,.T.); +#77216 = EDGE_LOOP('',(#77217,#77227,#77235,#77243)); +#77217 = ORIENTED_EDGE('',*,*,#77218,.T.); +#77218 = EDGE_CURVE('',#77219,#77221,#77223,.T.); +#77219 = VERTEX_POINT('',#77220); +#77220 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77221 = VERTEX_POINT('',#77222); +#77222 = CARTESIAN_POINT('',(3.1,-5.6792,2.219)); +#77223 = LINE('',#77224,#77225); +#77224 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77225 = VECTOR('',#77226,1.); +#77226 = DIRECTION('',(0.,0.,1.)); +#77227 = ORIENTED_EDGE('',*,*,#77228,.T.); +#77228 = EDGE_CURVE('',#77221,#77229,#77231,.T.); +#77229 = VERTEX_POINT('',#77230); +#77230 = CARTESIAN_POINT('',(3.35,-5.6792,2.219)); +#77231 = LINE('',#77232,#77233); +#77232 = CARTESIAN_POINT('',(3.1,-5.6792,2.219)); +#77233 = VECTOR('',#77234,1.); +#77234 = DIRECTION('',(1.,0.,0.)); +#77235 = ORIENTED_EDGE('',*,*,#77236,.F.); +#77236 = EDGE_CURVE('',#77237,#77229,#77239,.T.); +#77237 = VERTEX_POINT('',#77238); +#77238 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77239 = LINE('',#77240,#77241); +#77240 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77241 = VECTOR('',#77242,1.); +#77242 = DIRECTION('',(0.,0.,1.)); +#77243 = ORIENTED_EDGE('',*,*,#77244,.F.); +#77244 = EDGE_CURVE('',#77219,#77237,#77245,.T.); +#77245 = LINE('',#77246,#77247); +#77246 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77247 = VECTOR('',#77248,1.); +#77248 = DIRECTION('',(1.,0.,0.)); +#77249 = PLANE('',#77250); +#77250 = AXIS2_PLACEMENT_3D('',#77251,#77252,#77253); +#77251 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77252 = DIRECTION('',(0.,1.,0.)); +#77253 = DIRECTION('',(1.,0.,0.)); +#77254 = ADVANCED_FACE('',(#77255),#77280,.T.); +#77255 = FACE_BOUND('',#77256,.T.); +#77256 = EDGE_LOOP('',(#77257,#77258,#77266,#77274)); +#77257 = ORIENTED_EDGE('',*,*,#77236,.T.); +#77258 = ORIENTED_EDGE('',*,*,#77259,.T.); +#77259 = EDGE_CURVE('',#77229,#77260,#77262,.T.); +#77260 = VERTEX_POINT('',#77261); +#77261 = CARTESIAN_POINT('',(3.35,-7.6392,2.219)); +#77262 = LINE('',#77263,#77264); +#77263 = CARTESIAN_POINT('',(3.35,-5.6792,2.219)); +#77264 = VECTOR('',#77265,1.); +#77265 = DIRECTION('',(0.,-1.,0.)); +#77266 = ORIENTED_EDGE('',*,*,#77267,.F.); +#77267 = EDGE_CURVE('',#77268,#77260,#77270,.T.); +#77268 = VERTEX_POINT('',#77269); +#77269 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77270 = LINE('',#77271,#77272); +#77271 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77272 = VECTOR('',#77273,1.); +#77273 = DIRECTION('',(0.,0.,1.)); +#77274 = ORIENTED_EDGE('',*,*,#77275,.F.); +#77275 = EDGE_CURVE('',#77237,#77268,#77276,.T.); +#77276 = LINE('',#77277,#77278); +#77277 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77278 = VECTOR('',#77279,1.); +#77279 = DIRECTION('',(0.,-1.,0.)); +#77280 = PLANE('',#77281); +#77281 = AXIS2_PLACEMENT_3D('',#77282,#77283,#77284); +#77282 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77283 = DIRECTION('',(1.,0.,0.)); +#77284 = DIRECTION('',(0.,-1.,0.)); +#77285 = ADVANCED_FACE('',(#77286),#77311,.T.); +#77286 = FACE_BOUND('',#77287,.T.); +#77287 = EDGE_LOOP('',(#77288,#77289,#77297,#77305)); +#77288 = ORIENTED_EDGE('',*,*,#77267,.T.); +#77289 = ORIENTED_EDGE('',*,*,#77290,.T.); +#77290 = EDGE_CURVE('',#77260,#77291,#77293,.T.); +#77291 = VERTEX_POINT('',#77292); +#77292 = CARTESIAN_POINT('',(3.1,-7.6392,2.219)); +#77293 = LINE('',#77294,#77295); +#77294 = CARTESIAN_POINT('',(3.35,-7.6392,2.219)); +#77295 = VECTOR('',#77296,1.); +#77296 = DIRECTION('',(-1.,0.,0.)); +#77297 = ORIENTED_EDGE('',*,*,#77298,.F.); +#77298 = EDGE_CURVE('',#77299,#77291,#77301,.T.); +#77299 = VERTEX_POINT('',#77300); +#77300 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77301 = LINE('',#77302,#77303); +#77302 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77303 = VECTOR('',#77304,1.); +#77304 = DIRECTION('',(0.,0.,1.)); +#77305 = ORIENTED_EDGE('',*,*,#77306,.F.); +#77306 = EDGE_CURVE('',#77268,#77299,#77307,.T.); +#77307 = LINE('',#77308,#77309); +#77308 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77309 = VECTOR('',#77310,1.); +#77310 = DIRECTION('',(-1.,0.,0.)); +#77311 = PLANE('',#77312); +#77312 = AXIS2_PLACEMENT_3D('',#77313,#77314,#77315); +#77313 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77314 = DIRECTION('',(0.,-1.,0.)); +#77315 = DIRECTION('',(-1.,0.,0.)); +#77316 = ADVANCED_FACE('',(#77317),#77333,.T.); +#77317 = FACE_BOUND('',#77318,.T.); +#77318 = EDGE_LOOP('',(#77319,#77320,#77326,#77327)); +#77319 = ORIENTED_EDGE('',*,*,#77298,.T.); +#77320 = ORIENTED_EDGE('',*,*,#77321,.T.); +#77321 = EDGE_CURVE('',#77291,#77221,#77322,.T.); +#77322 = LINE('',#77323,#77324); +#77323 = CARTESIAN_POINT('',(3.1,-7.6392,2.219)); +#77324 = VECTOR('',#77325,1.); +#77325 = DIRECTION('',(0.,1.,0.)); +#77326 = ORIENTED_EDGE('',*,*,#77218,.F.); +#77327 = ORIENTED_EDGE('',*,*,#77328,.F.); +#77328 = EDGE_CURVE('',#77299,#77219,#77329,.T.); +#77329 = LINE('',#77330,#77331); +#77330 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77331 = VECTOR('',#77332,1.); +#77332 = DIRECTION('',(0.,1.,0.)); +#77333 = PLANE('',#77334); +#77334 = AXIS2_PLACEMENT_3D('',#77335,#77336,#77337); +#77335 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77336 = DIRECTION('',(-1.,0.,0.)); +#77337 = DIRECTION('',(0.,1.,0.)); +#77338 = ADVANCED_FACE('',(#77339),#77345,.F.); +#77339 = FACE_BOUND('',#77340,.T.); +#77340 = EDGE_LOOP('',(#77341,#77342,#77343,#77344)); +#77341 = ORIENTED_EDGE('',*,*,#77244,.T.); +#77342 = ORIENTED_EDGE('',*,*,#77275,.T.); +#77343 = ORIENTED_EDGE('',*,*,#77306,.T.); +#77344 = ORIENTED_EDGE('',*,*,#77328,.T.); +#77345 = PLANE('',#77346); +#77346 = AXIS2_PLACEMENT_3D('',#77347,#77348,#77349); +#77347 = CARTESIAN_POINT('',(3.225,-6.6592,2.17)); +#77348 = DIRECTION('',(0.,0.,1.)); +#77349 = DIRECTION('',(1.,0.,-0.)); +#77350 = ADVANCED_FACE('',(#77351),#77357,.T.); +#77351 = FACE_BOUND('',#77352,.F.); +#77352 = EDGE_LOOP('',(#77353,#77354,#77355,#77356)); +#77353 = ORIENTED_EDGE('',*,*,#77228,.T.); +#77354 = ORIENTED_EDGE('',*,*,#77259,.T.); +#77355 = ORIENTED_EDGE('',*,*,#77290,.T.); +#77356 = ORIENTED_EDGE('',*,*,#77321,.T.); +#77357 = PLANE('',#77358); +#77358 = AXIS2_PLACEMENT_3D('',#77359,#77360,#77361); +#77359 = CARTESIAN_POINT('',(3.225,-6.6592,2.219)); +#77360 = DIRECTION('',(0.,0.,1.)); +#77361 = DIRECTION('',(1.,0.,-0.)); +#77362 = MANIFOLD_SOLID_BREP('',#77363); +#77363 = CLOSED_SHELL('',(#77364,#77404,#77435,#77466,#77488,#77500)); +#77364 = ADVANCED_FACE('',(#77365),#77399,.T.); +#77365 = FACE_BOUND('',#77366,.T.); +#77366 = EDGE_LOOP('',(#77367,#77377,#77385,#77393)); +#77367 = ORIENTED_EDGE('',*,*,#77368,.T.); +#77368 = EDGE_CURVE('',#77369,#77371,#77373,.T.); +#77369 = VERTEX_POINT('',#77370); +#77370 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77371 = VERTEX_POINT('',#77372); +#77372 = CARTESIAN_POINT('',(3.1,-5.6792,1.568)); +#77373 = LINE('',#77374,#77375); +#77374 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77375 = VECTOR('',#77376,1.); +#77376 = DIRECTION('',(0.,0.,1.)); +#77377 = ORIENTED_EDGE('',*,*,#77378,.T.); +#77378 = EDGE_CURVE('',#77371,#77379,#77381,.T.); +#77379 = VERTEX_POINT('',#77380); +#77380 = CARTESIAN_POINT('',(3.35,-5.6792,1.568)); +#77381 = LINE('',#77382,#77383); +#77382 = CARTESIAN_POINT('',(3.1,-5.6792,1.568)); +#77383 = VECTOR('',#77384,1.); +#77384 = DIRECTION('',(1.,0.,0.)); +#77385 = ORIENTED_EDGE('',*,*,#77386,.F.); +#77386 = EDGE_CURVE('',#77387,#77379,#77389,.T.); +#77387 = VERTEX_POINT('',#77388); +#77388 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77389 = LINE('',#77390,#77391); +#77390 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77391 = VECTOR('',#77392,1.); +#77392 = DIRECTION('',(0.,0.,1.)); +#77393 = ORIENTED_EDGE('',*,*,#77394,.F.); +#77394 = EDGE_CURVE('',#77369,#77387,#77395,.T.); +#77395 = LINE('',#77396,#77397); +#77396 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77397 = VECTOR('',#77398,1.); +#77398 = DIRECTION('',(1.,0.,0.)); +#77399 = PLANE('',#77400); +#77400 = AXIS2_PLACEMENT_3D('',#77401,#77402,#77403); +#77401 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77402 = DIRECTION('',(0.,1.,0.)); +#77403 = DIRECTION('',(1.,0.,0.)); +#77404 = ADVANCED_FACE('',(#77405),#77430,.T.); +#77405 = FACE_BOUND('',#77406,.T.); +#77406 = EDGE_LOOP('',(#77407,#77408,#77416,#77424)); +#77407 = ORIENTED_EDGE('',*,*,#77386,.T.); +#77408 = ORIENTED_EDGE('',*,*,#77409,.T.); +#77409 = EDGE_CURVE('',#77379,#77410,#77412,.T.); +#77410 = VERTEX_POINT('',#77411); +#77411 = CARTESIAN_POINT('',(3.35,-7.6392,1.568)); +#77412 = LINE('',#77413,#77414); +#77413 = CARTESIAN_POINT('',(3.35,-5.6792,1.568)); +#77414 = VECTOR('',#77415,1.); +#77415 = DIRECTION('',(0.,-1.,0.)); +#77416 = ORIENTED_EDGE('',*,*,#77417,.F.); +#77417 = EDGE_CURVE('',#77418,#77410,#77420,.T.); +#77418 = VERTEX_POINT('',#77419); +#77419 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77420 = LINE('',#77421,#77422); +#77421 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77422 = VECTOR('',#77423,1.); +#77423 = DIRECTION('',(0.,0.,1.)); +#77424 = ORIENTED_EDGE('',*,*,#77425,.F.); +#77425 = EDGE_CURVE('',#77387,#77418,#77426,.T.); +#77426 = LINE('',#77427,#77428); +#77427 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77428 = VECTOR('',#77429,1.); +#77429 = DIRECTION('',(0.,-1.,0.)); +#77430 = PLANE('',#77431); +#77431 = AXIS2_PLACEMENT_3D('',#77432,#77433,#77434); +#77432 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77433 = DIRECTION('',(1.,0.,0.)); +#77434 = DIRECTION('',(0.,-1.,0.)); +#77435 = ADVANCED_FACE('',(#77436),#77461,.T.); +#77436 = FACE_BOUND('',#77437,.T.); +#77437 = EDGE_LOOP('',(#77438,#77439,#77447,#77455)); +#77438 = ORIENTED_EDGE('',*,*,#77417,.T.); +#77439 = ORIENTED_EDGE('',*,*,#77440,.T.); +#77440 = EDGE_CURVE('',#77410,#77441,#77443,.T.); +#77441 = VERTEX_POINT('',#77442); +#77442 = CARTESIAN_POINT('',(3.1,-7.6392,1.568)); +#77443 = LINE('',#77444,#77445); +#77444 = CARTESIAN_POINT('',(3.35,-7.6392,1.568)); +#77445 = VECTOR('',#77446,1.); +#77446 = DIRECTION('',(-1.,0.,0.)); +#77447 = ORIENTED_EDGE('',*,*,#77448,.F.); +#77448 = EDGE_CURVE('',#77449,#77441,#77451,.T.); +#77449 = VERTEX_POINT('',#77450); +#77450 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77451 = LINE('',#77452,#77453); +#77452 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77453 = VECTOR('',#77454,1.); +#77454 = DIRECTION('',(0.,0.,1.)); +#77455 = ORIENTED_EDGE('',*,*,#77456,.F.); +#77456 = EDGE_CURVE('',#77418,#77449,#77457,.T.); +#77457 = LINE('',#77458,#77459); +#77458 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77459 = VECTOR('',#77460,1.); +#77460 = DIRECTION('',(-1.,0.,0.)); +#77461 = PLANE('',#77462); +#77462 = AXIS2_PLACEMENT_3D('',#77463,#77464,#77465); +#77463 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77464 = DIRECTION('',(0.,-1.,0.)); +#77465 = DIRECTION('',(-1.,0.,0.)); +#77466 = ADVANCED_FACE('',(#77467),#77483,.T.); +#77467 = FACE_BOUND('',#77468,.T.); +#77468 = EDGE_LOOP('',(#77469,#77470,#77476,#77477)); +#77469 = ORIENTED_EDGE('',*,*,#77448,.T.); +#77470 = ORIENTED_EDGE('',*,*,#77471,.T.); +#77471 = EDGE_CURVE('',#77441,#77371,#77472,.T.); +#77472 = LINE('',#77473,#77474); +#77473 = CARTESIAN_POINT('',(3.1,-7.6392,1.568)); +#77474 = VECTOR('',#77475,1.); +#77475 = DIRECTION('',(0.,1.,0.)); +#77476 = ORIENTED_EDGE('',*,*,#77368,.F.); +#77477 = ORIENTED_EDGE('',*,*,#77478,.F.); +#77478 = EDGE_CURVE('',#77449,#77369,#77479,.T.); +#77479 = LINE('',#77480,#77481); +#77480 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77481 = VECTOR('',#77482,1.); +#77482 = DIRECTION('',(0.,1.,0.)); +#77483 = PLANE('',#77484); +#77484 = AXIS2_PLACEMENT_3D('',#77485,#77486,#77487); +#77485 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77486 = DIRECTION('',(-1.,0.,0.)); +#77487 = DIRECTION('',(0.,1.,0.)); +#77488 = ADVANCED_FACE('',(#77489),#77495,.F.); +#77489 = FACE_BOUND('',#77490,.T.); +#77490 = EDGE_LOOP('',(#77491,#77492,#77493,#77494)); +#77491 = ORIENTED_EDGE('',*,*,#77394,.T.); +#77492 = ORIENTED_EDGE('',*,*,#77425,.T.); +#77493 = ORIENTED_EDGE('',*,*,#77456,.T.); +#77494 = ORIENTED_EDGE('',*,*,#77478,.T.); +#77495 = PLANE('',#77496); +#77496 = AXIS2_PLACEMENT_3D('',#77497,#77498,#77499); +#77497 = CARTESIAN_POINT('',(3.225,-6.6592,1.519)); +#77498 = DIRECTION('',(0.,0.,1.)); +#77499 = DIRECTION('',(1.,0.,-0.)); +#77500 = ADVANCED_FACE('',(#77501),#77507,.T.); +#77501 = FACE_BOUND('',#77502,.F.); +#77502 = EDGE_LOOP('',(#77503,#77504,#77505,#77506)); +#77503 = ORIENTED_EDGE('',*,*,#77378,.T.); +#77504 = ORIENTED_EDGE('',*,*,#77409,.T.); +#77505 = ORIENTED_EDGE('',*,*,#77440,.T.); +#77506 = ORIENTED_EDGE('',*,*,#77471,.T.); +#77507 = PLANE('',#77508); +#77508 = AXIS2_PLACEMENT_3D('',#77509,#77510,#77511); +#77509 = CARTESIAN_POINT('',(3.225,-6.6592,1.568)); +#77510 = DIRECTION('',(0.,0.,1.)); +#77511 = DIRECTION('',(1.,0.,-0.)); +#77512 = MANIFOLD_SOLID_BREP('',#77513); +#77513 = CLOSED_SHELL('',(#77514,#77554,#77585,#77616,#77638,#77650)); +#77514 = ADVANCED_FACE('',(#77515),#77549,.T.); +#77515 = FACE_BOUND('',#77516,.T.); +#77516 = EDGE_LOOP('',(#77517,#77527,#77535,#77543)); +#77517 = ORIENTED_EDGE('',*,*,#77518,.T.); +#77518 = EDGE_CURVE('',#77519,#77521,#77523,.T.); +#77519 = VERTEX_POINT('',#77520); +#77520 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77521 = VERTEX_POINT('',#77522); +#77522 = CARTESIAN_POINT('',(3.6,-5.6792,2.219)); +#77523 = LINE('',#77524,#77525); +#77524 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77525 = VECTOR('',#77526,1.); +#77526 = DIRECTION('',(0.,0.,1.)); +#77527 = ORIENTED_EDGE('',*,*,#77528,.T.); +#77528 = EDGE_CURVE('',#77521,#77529,#77531,.T.); +#77529 = VERTEX_POINT('',#77530); +#77530 = CARTESIAN_POINT('',(3.85,-5.6792,2.219)); +#77531 = LINE('',#77532,#77533); +#77532 = CARTESIAN_POINT('',(3.6,-5.6792,2.219)); +#77533 = VECTOR('',#77534,1.); +#77534 = DIRECTION('',(1.,0.,0.)); +#77535 = ORIENTED_EDGE('',*,*,#77536,.F.); +#77536 = EDGE_CURVE('',#77537,#77529,#77539,.T.); +#77537 = VERTEX_POINT('',#77538); +#77538 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77539 = LINE('',#77540,#77541); +#77540 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77541 = VECTOR('',#77542,1.); +#77542 = DIRECTION('',(0.,0.,1.)); +#77543 = ORIENTED_EDGE('',*,*,#77544,.F.); +#77544 = EDGE_CURVE('',#77519,#77537,#77545,.T.); +#77545 = LINE('',#77546,#77547); +#77546 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77547 = VECTOR('',#77548,1.); +#77548 = DIRECTION('',(1.,0.,0.)); +#77549 = PLANE('',#77550); +#77550 = AXIS2_PLACEMENT_3D('',#77551,#77552,#77553); +#77551 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77552 = DIRECTION('',(0.,1.,0.)); +#77553 = DIRECTION('',(1.,0.,0.)); +#77554 = ADVANCED_FACE('',(#77555),#77580,.T.); +#77555 = FACE_BOUND('',#77556,.T.); +#77556 = EDGE_LOOP('',(#77557,#77558,#77566,#77574)); +#77557 = ORIENTED_EDGE('',*,*,#77536,.T.); +#77558 = ORIENTED_EDGE('',*,*,#77559,.T.); +#77559 = EDGE_CURVE('',#77529,#77560,#77562,.T.); +#77560 = VERTEX_POINT('',#77561); +#77561 = CARTESIAN_POINT('',(3.85,-7.6392,2.219)); +#77562 = LINE('',#77563,#77564); +#77563 = CARTESIAN_POINT('',(3.85,-5.6792,2.219)); +#77564 = VECTOR('',#77565,1.); +#77565 = DIRECTION('',(0.,-1.,0.)); +#77566 = ORIENTED_EDGE('',*,*,#77567,.F.); +#77567 = EDGE_CURVE('',#77568,#77560,#77570,.T.); +#77568 = VERTEX_POINT('',#77569); +#77569 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77570 = LINE('',#77571,#77572); +#77571 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77572 = VECTOR('',#77573,1.); +#77573 = DIRECTION('',(0.,0.,1.)); +#77574 = ORIENTED_EDGE('',*,*,#77575,.F.); +#77575 = EDGE_CURVE('',#77537,#77568,#77576,.T.); +#77576 = LINE('',#77577,#77578); +#77577 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77578 = VECTOR('',#77579,1.); +#77579 = DIRECTION('',(0.,-1.,0.)); +#77580 = PLANE('',#77581); +#77581 = AXIS2_PLACEMENT_3D('',#77582,#77583,#77584); +#77582 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77583 = DIRECTION('',(1.,0.,0.)); +#77584 = DIRECTION('',(0.,-1.,0.)); +#77585 = ADVANCED_FACE('',(#77586),#77611,.T.); +#77586 = FACE_BOUND('',#77587,.T.); +#77587 = EDGE_LOOP('',(#77588,#77589,#77597,#77605)); +#77588 = ORIENTED_EDGE('',*,*,#77567,.T.); +#77589 = ORIENTED_EDGE('',*,*,#77590,.T.); +#77590 = EDGE_CURVE('',#77560,#77591,#77593,.T.); +#77591 = VERTEX_POINT('',#77592); +#77592 = CARTESIAN_POINT('',(3.6,-7.6392,2.219)); +#77593 = LINE('',#77594,#77595); +#77594 = CARTESIAN_POINT('',(3.85,-7.6392,2.219)); +#77595 = VECTOR('',#77596,1.); +#77596 = DIRECTION('',(-1.,0.,0.)); +#77597 = ORIENTED_EDGE('',*,*,#77598,.F.); +#77598 = EDGE_CURVE('',#77599,#77591,#77601,.T.); +#77599 = VERTEX_POINT('',#77600); +#77600 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77601 = LINE('',#77602,#77603); +#77602 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77603 = VECTOR('',#77604,1.); +#77604 = DIRECTION('',(0.,0.,1.)); +#77605 = ORIENTED_EDGE('',*,*,#77606,.F.); +#77606 = EDGE_CURVE('',#77568,#77599,#77607,.T.); +#77607 = LINE('',#77608,#77609); +#77608 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77609 = VECTOR('',#77610,1.); +#77610 = DIRECTION('',(-1.,0.,0.)); +#77611 = PLANE('',#77612); +#77612 = AXIS2_PLACEMENT_3D('',#77613,#77614,#77615); +#77613 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77614 = DIRECTION('',(0.,-1.,0.)); +#77615 = DIRECTION('',(-1.,0.,0.)); +#77616 = ADVANCED_FACE('',(#77617),#77633,.T.); +#77617 = FACE_BOUND('',#77618,.T.); +#77618 = EDGE_LOOP('',(#77619,#77620,#77626,#77627)); +#77619 = ORIENTED_EDGE('',*,*,#77598,.T.); +#77620 = ORIENTED_EDGE('',*,*,#77621,.T.); +#77621 = EDGE_CURVE('',#77591,#77521,#77622,.T.); +#77622 = LINE('',#77623,#77624); +#77623 = CARTESIAN_POINT('',(3.6,-7.6392,2.219)); +#77624 = VECTOR('',#77625,1.); +#77625 = DIRECTION('',(0.,1.,0.)); +#77626 = ORIENTED_EDGE('',*,*,#77518,.F.); +#77627 = ORIENTED_EDGE('',*,*,#77628,.F.); +#77628 = EDGE_CURVE('',#77599,#77519,#77629,.T.); +#77629 = LINE('',#77630,#77631); +#77630 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77631 = VECTOR('',#77632,1.); +#77632 = DIRECTION('',(0.,1.,0.)); +#77633 = PLANE('',#77634); +#77634 = AXIS2_PLACEMENT_3D('',#77635,#77636,#77637); +#77635 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77636 = DIRECTION('',(-1.,0.,0.)); +#77637 = DIRECTION('',(0.,1.,0.)); +#77638 = ADVANCED_FACE('',(#77639),#77645,.F.); +#77639 = FACE_BOUND('',#77640,.T.); +#77640 = EDGE_LOOP('',(#77641,#77642,#77643,#77644)); +#77641 = ORIENTED_EDGE('',*,*,#77544,.T.); +#77642 = ORIENTED_EDGE('',*,*,#77575,.T.); +#77643 = ORIENTED_EDGE('',*,*,#77606,.T.); +#77644 = ORIENTED_EDGE('',*,*,#77628,.T.); +#77645 = PLANE('',#77646); +#77646 = AXIS2_PLACEMENT_3D('',#77647,#77648,#77649); +#77647 = CARTESIAN_POINT('',(3.725,-6.6592,2.17)); +#77648 = DIRECTION('',(0.,0.,1.)); +#77649 = DIRECTION('',(1.,0.,-0.)); +#77650 = ADVANCED_FACE('',(#77651),#77657,.T.); +#77651 = FACE_BOUND('',#77652,.F.); +#77652 = EDGE_LOOP('',(#77653,#77654,#77655,#77656)); +#77653 = ORIENTED_EDGE('',*,*,#77528,.T.); +#77654 = ORIENTED_EDGE('',*,*,#77559,.T.); +#77655 = ORIENTED_EDGE('',*,*,#77590,.T.); +#77656 = ORIENTED_EDGE('',*,*,#77621,.T.); +#77657 = PLANE('',#77658); +#77658 = AXIS2_PLACEMENT_3D('',#77659,#77660,#77661); +#77659 = CARTESIAN_POINT('',(3.725,-6.6592,2.219)); +#77660 = DIRECTION('',(0.,0.,1.)); +#77661 = DIRECTION('',(1.,0.,-0.)); +#77662 = MANIFOLD_SOLID_BREP('',#77663); +#77663 = CLOSED_SHELL('',(#77664,#77704,#77735,#77766,#77788,#77800)); +#77664 = ADVANCED_FACE('',(#77665),#77699,.T.); +#77665 = FACE_BOUND('',#77666,.T.); +#77666 = EDGE_LOOP('',(#77667,#77677,#77685,#77693)); +#77667 = ORIENTED_EDGE('',*,*,#77668,.T.); +#77668 = EDGE_CURVE('',#77669,#77671,#77673,.T.); +#77669 = VERTEX_POINT('',#77670); +#77670 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77671 = VERTEX_POINT('',#77672); +#77672 = CARTESIAN_POINT('',(3.6,-5.6792,1.568)); +#77673 = LINE('',#77674,#77675); +#77674 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77675 = VECTOR('',#77676,1.); +#77676 = DIRECTION('',(0.,0.,1.)); +#77677 = ORIENTED_EDGE('',*,*,#77678,.T.); +#77678 = EDGE_CURVE('',#77671,#77679,#77681,.T.); +#77679 = VERTEX_POINT('',#77680); +#77680 = CARTESIAN_POINT('',(3.85,-5.6792,1.568)); +#77681 = LINE('',#77682,#77683); +#77682 = CARTESIAN_POINT('',(3.6,-5.6792,1.568)); +#77683 = VECTOR('',#77684,1.); +#77684 = DIRECTION('',(1.,0.,0.)); +#77685 = ORIENTED_EDGE('',*,*,#77686,.F.); +#77686 = EDGE_CURVE('',#77687,#77679,#77689,.T.); +#77687 = VERTEX_POINT('',#77688); +#77688 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77689 = LINE('',#77690,#77691); +#77690 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77691 = VECTOR('',#77692,1.); +#77692 = DIRECTION('',(0.,0.,1.)); +#77693 = ORIENTED_EDGE('',*,*,#77694,.F.); +#77694 = EDGE_CURVE('',#77669,#77687,#77695,.T.); +#77695 = LINE('',#77696,#77697); +#77696 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77697 = VECTOR('',#77698,1.); +#77698 = DIRECTION('',(1.,0.,0.)); +#77699 = PLANE('',#77700); +#77700 = AXIS2_PLACEMENT_3D('',#77701,#77702,#77703); +#77701 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77702 = DIRECTION('',(0.,1.,0.)); +#77703 = DIRECTION('',(1.,0.,0.)); +#77704 = ADVANCED_FACE('',(#77705),#77730,.T.); +#77705 = FACE_BOUND('',#77706,.T.); +#77706 = EDGE_LOOP('',(#77707,#77708,#77716,#77724)); +#77707 = ORIENTED_EDGE('',*,*,#77686,.T.); +#77708 = ORIENTED_EDGE('',*,*,#77709,.T.); +#77709 = EDGE_CURVE('',#77679,#77710,#77712,.T.); +#77710 = VERTEX_POINT('',#77711); +#77711 = CARTESIAN_POINT('',(3.85,-7.6392,1.568)); +#77712 = LINE('',#77713,#77714); +#77713 = CARTESIAN_POINT('',(3.85,-5.6792,1.568)); +#77714 = VECTOR('',#77715,1.); +#77715 = DIRECTION('',(0.,-1.,0.)); +#77716 = ORIENTED_EDGE('',*,*,#77717,.F.); +#77717 = EDGE_CURVE('',#77718,#77710,#77720,.T.); +#77718 = VERTEX_POINT('',#77719); +#77719 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77720 = LINE('',#77721,#77722); +#77721 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77722 = VECTOR('',#77723,1.); +#77723 = DIRECTION('',(0.,0.,1.)); +#77724 = ORIENTED_EDGE('',*,*,#77725,.F.); +#77725 = EDGE_CURVE('',#77687,#77718,#77726,.T.); +#77726 = LINE('',#77727,#77728); +#77727 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77728 = VECTOR('',#77729,1.); +#77729 = DIRECTION('',(0.,-1.,0.)); +#77730 = PLANE('',#77731); +#77731 = AXIS2_PLACEMENT_3D('',#77732,#77733,#77734); +#77732 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77733 = DIRECTION('',(1.,0.,0.)); +#77734 = DIRECTION('',(0.,-1.,0.)); +#77735 = ADVANCED_FACE('',(#77736),#77761,.T.); +#77736 = FACE_BOUND('',#77737,.T.); +#77737 = EDGE_LOOP('',(#77738,#77739,#77747,#77755)); +#77738 = ORIENTED_EDGE('',*,*,#77717,.T.); +#77739 = ORIENTED_EDGE('',*,*,#77740,.T.); +#77740 = EDGE_CURVE('',#77710,#77741,#77743,.T.); +#77741 = VERTEX_POINT('',#77742); +#77742 = CARTESIAN_POINT('',(3.6,-7.6392,1.568)); +#77743 = LINE('',#77744,#77745); +#77744 = CARTESIAN_POINT('',(3.85,-7.6392,1.568)); +#77745 = VECTOR('',#77746,1.); +#77746 = DIRECTION('',(-1.,0.,0.)); +#77747 = ORIENTED_EDGE('',*,*,#77748,.F.); +#77748 = EDGE_CURVE('',#77749,#77741,#77751,.T.); +#77749 = VERTEX_POINT('',#77750); +#77750 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77751 = LINE('',#77752,#77753); +#77752 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77753 = VECTOR('',#77754,1.); +#77754 = DIRECTION('',(0.,0.,1.)); +#77755 = ORIENTED_EDGE('',*,*,#77756,.F.); +#77756 = EDGE_CURVE('',#77718,#77749,#77757,.T.); +#77757 = LINE('',#77758,#77759); +#77758 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77759 = VECTOR('',#77760,1.); +#77760 = DIRECTION('',(-1.,0.,0.)); +#77761 = PLANE('',#77762); +#77762 = AXIS2_PLACEMENT_3D('',#77763,#77764,#77765); +#77763 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77764 = DIRECTION('',(0.,-1.,0.)); +#77765 = DIRECTION('',(-1.,0.,0.)); +#77766 = ADVANCED_FACE('',(#77767),#77783,.T.); +#77767 = FACE_BOUND('',#77768,.T.); +#77768 = EDGE_LOOP('',(#77769,#77770,#77776,#77777)); +#77769 = ORIENTED_EDGE('',*,*,#77748,.T.); +#77770 = ORIENTED_EDGE('',*,*,#77771,.T.); +#77771 = EDGE_CURVE('',#77741,#77671,#77772,.T.); +#77772 = LINE('',#77773,#77774); +#77773 = CARTESIAN_POINT('',(3.6,-7.6392,1.568)); +#77774 = VECTOR('',#77775,1.); +#77775 = DIRECTION('',(0.,1.,0.)); +#77776 = ORIENTED_EDGE('',*,*,#77668,.F.); +#77777 = ORIENTED_EDGE('',*,*,#77778,.F.); +#77778 = EDGE_CURVE('',#77749,#77669,#77779,.T.); +#77779 = LINE('',#77780,#77781); +#77780 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77781 = VECTOR('',#77782,1.); +#77782 = DIRECTION('',(0.,1.,0.)); +#77783 = PLANE('',#77784); +#77784 = AXIS2_PLACEMENT_3D('',#77785,#77786,#77787); +#77785 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77786 = DIRECTION('',(-1.,0.,0.)); +#77787 = DIRECTION('',(0.,1.,0.)); +#77788 = ADVANCED_FACE('',(#77789),#77795,.F.); +#77789 = FACE_BOUND('',#77790,.T.); +#77790 = EDGE_LOOP('',(#77791,#77792,#77793,#77794)); +#77791 = ORIENTED_EDGE('',*,*,#77694,.T.); +#77792 = ORIENTED_EDGE('',*,*,#77725,.T.); +#77793 = ORIENTED_EDGE('',*,*,#77756,.T.); +#77794 = ORIENTED_EDGE('',*,*,#77778,.T.); +#77795 = PLANE('',#77796); +#77796 = AXIS2_PLACEMENT_3D('',#77797,#77798,#77799); +#77797 = CARTESIAN_POINT('',(3.725,-6.6592,1.519)); +#77798 = DIRECTION('',(0.,0.,1.)); +#77799 = DIRECTION('',(1.,0.,-0.)); +#77800 = ADVANCED_FACE('',(#77801),#77807,.T.); +#77801 = FACE_BOUND('',#77802,.F.); +#77802 = EDGE_LOOP('',(#77803,#77804,#77805,#77806)); +#77803 = ORIENTED_EDGE('',*,*,#77678,.T.); +#77804 = ORIENTED_EDGE('',*,*,#77709,.T.); +#77805 = ORIENTED_EDGE('',*,*,#77740,.T.); +#77806 = ORIENTED_EDGE('',*,*,#77771,.T.); +#77807 = PLANE('',#77808); +#77808 = AXIS2_PLACEMENT_3D('',#77809,#77810,#77811); +#77809 = CARTESIAN_POINT('',(3.725,-6.6592,1.568)); +#77810 = DIRECTION('',(0.,0.,1.)); +#77811 = DIRECTION('',(1.,0.,-0.)); +#77812 = MANIFOLD_SOLID_BREP('',#77813); +#77813 = CLOSED_SHELL('',(#77814,#77870,#77901,#77925,#77949,#77973, + #77997,#78014)); +#77814 = ADVANCED_FACE('',(#77815),#77865,.F.); +#77815 = FACE_BOUND('',#77816,.F.); +#77816 = EDGE_LOOP('',(#77817,#77827,#77835,#77843,#77851,#77859)); +#77817 = ORIENTED_EDGE('',*,*,#77818,.T.); +#77818 = EDGE_CURVE('',#77819,#77821,#77823,.T.); +#77819 = VERTEX_POINT('',#77820); +#77820 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77821 = VERTEX_POINT('',#77822); +#77822 = CARTESIAN_POINT('',(0.11,-1.425,-1.41)); +#77823 = LINE('',#77824,#77825); +#77824 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77825 = VECTOR('',#77826,1.); +#77826 = DIRECTION('',(0.,0.,-1.)); +#77827 = ORIENTED_EDGE('',*,*,#77828,.T.); +#77828 = EDGE_CURVE('',#77821,#77829,#77831,.T.); +#77829 = VERTEX_POINT('',#77830); +#77830 = CARTESIAN_POINT('',(6.E-02,-1.425,-1.61)); +#77831 = LINE('',#77832,#77833); +#77832 = CARTESIAN_POINT('',(0.285735294118,-1.425,-0.707058823529)); +#77833 = VECTOR('',#77834,1.); +#77834 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#77835 = ORIENTED_EDGE('',*,*,#77836,.T.); +#77836 = EDGE_CURVE('',#77829,#77837,#77839,.T.); +#77837 = VERTEX_POINT('',#77838); +#77838 = CARTESIAN_POINT('',(-6.E-02,-1.425,-1.61)); +#77839 = LINE('',#77840,#77841); +#77840 = CARTESIAN_POINT('',(0.11,-1.425,-1.61)); +#77841 = VECTOR('',#77842,1.); +#77842 = DIRECTION('',(-1.,0.,0.)); +#77843 = ORIENTED_EDGE('',*,*,#77844,.F.); +#77844 = EDGE_CURVE('',#77845,#77837,#77847,.T.); +#77845 = VERTEX_POINT('',#77846); +#77846 = CARTESIAN_POINT('',(-0.11,-1.425,-1.41)); +#77847 = LINE('',#77848,#77849); +#77848 = CARTESIAN_POINT('',(-0.279264705882,-1.425,-0.732941176471)); +#77849 = VECTOR('',#77850,1.); +#77850 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#77851 = ORIENTED_EDGE('',*,*,#77852,.F.); +#77852 = EDGE_CURVE('',#77853,#77845,#77855,.T.); +#77853 = VERTEX_POINT('',#77854); +#77854 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77855 = LINE('',#77856,#77857); +#77856 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77857 = VECTOR('',#77858,1.); +#77858 = DIRECTION('',(0.,0.,-1.)); +#77859 = ORIENTED_EDGE('',*,*,#77860,.F.); +#77860 = EDGE_CURVE('',#77819,#77853,#77861,.T.); +#77861 = LINE('',#77862,#77863); +#77862 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77863 = VECTOR('',#77864,1.); +#77864 = DIRECTION('',(-1.,0.,0.)); +#77865 = PLANE('',#77866); +#77866 = AXIS2_PLACEMENT_3D('',#77867,#77868,#77869); +#77867 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77868 = DIRECTION('',(0.,1.,0.)); +#77869 = DIRECTION('',(-1.,0.,0.)); +#77870 = ADVANCED_FACE('',(#77871),#77896,.F.); +#77871 = FACE_BOUND('',#77872,.F.); +#77872 = EDGE_LOOP('',(#77873,#77883,#77889,#77890)); +#77873 = ORIENTED_EDGE('',*,*,#77874,.T.); +#77874 = EDGE_CURVE('',#77875,#77877,#77879,.T.); +#77875 = VERTEX_POINT('',#77876); +#77876 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77877 = VERTEX_POINT('',#77878); +#77878 = CARTESIAN_POINT('',(0.11,-1.275,-1.41)); +#77879 = LINE('',#77880,#77881); +#77880 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77881 = VECTOR('',#77882,1.); +#77882 = DIRECTION('',(0.,0.,-1.)); +#77883 = ORIENTED_EDGE('',*,*,#77884,.T.); +#77884 = EDGE_CURVE('',#77877,#77821,#77885,.T.); +#77885 = LINE('',#77886,#77887); +#77886 = CARTESIAN_POINT('',(0.11,-1.275,-1.41)); +#77887 = VECTOR('',#77888,1.); +#77888 = DIRECTION('',(0.,-1.,0.)); +#77889 = ORIENTED_EDGE('',*,*,#77818,.F.); +#77890 = ORIENTED_EDGE('',*,*,#77891,.F.); +#77891 = EDGE_CURVE('',#77875,#77819,#77892,.T.); +#77892 = LINE('',#77893,#77894); +#77893 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77894 = VECTOR('',#77895,1.); +#77895 = DIRECTION('',(0.,-1.,0.)); +#77896 = PLANE('',#77897); +#77897 = AXIS2_PLACEMENT_3D('',#77898,#77899,#77900); +#77898 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77899 = DIRECTION('',(-1.,-0.,-0.)); +#77900 = DIRECTION('',(0.,-1.,0.)); +#77901 = ADVANCED_FACE('',(#77902),#77920,.T.); +#77902 = FACE_BOUND('',#77903,.T.); +#77903 = EDGE_LOOP('',(#77904,#77912,#77913,#77914)); +#77904 = ORIENTED_EDGE('',*,*,#77905,.F.); +#77905 = EDGE_CURVE('',#77877,#77906,#77908,.T.); +#77906 = VERTEX_POINT('',#77907); +#77907 = CARTESIAN_POINT('',(6.E-02,-1.275,-1.61)); +#77908 = LINE('',#77909,#77910); +#77909 = CARTESIAN_POINT('',(0.279264705882,-1.275,-0.732941176471)); +#77910 = VECTOR('',#77911,1.); +#77911 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#77912 = ORIENTED_EDGE('',*,*,#77884,.T.); +#77913 = ORIENTED_EDGE('',*,*,#77828,.T.); +#77914 = ORIENTED_EDGE('',*,*,#77915,.F.); +#77915 = EDGE_CURVE('',#77906,#77829,#77916,.T.); +#77916 = LINE('',#77917,#77918); +#77917 = CARTESIAN_POINT('',(6.E-02,-1.275,-1.61)); +#77918 = VECTOR('',#77919,1.); +#77919 = DIRECTION('',(0.,-1.,0.)); +#77920 = PLANE('',#77921); +#77921 = AXIS2_PLACEMENT_3D('',#77922,#77923,#77924); +#77922 = CARTESIAN_POINT('',(8.5E-02,-1.275,-1.51)); +#77923 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#77924 = DIRECTION('',(0.,-1.,0.)); +#77925 = ADVANCED_FACE('',(#77926),#77944,.T.); +#77926 = FACE_BOUND('',#77927,.F.); +#77927 = EDGE_LOOP('',(#77928,#77929,#77937,#77943)); +#77928 = ORIENTED_EDGE('',*,*,#77860,.T.); +#77929 = ORIENTED_EDGE('',*,*,#77930,.T.); +#77930 = EDGE_CURVE('',#77853,#77931,#77933,.T.); +#77931 = VERTEX_POINT('',#77932); +#77932 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#77933 = LINE('',#77934,#77935); +#77934 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77935 = VECTOR('',#77936,1.); +#77936 = DIRECTION('',(0.,1.,0.)); +#77937 = ORIENTED_EDGE('',*,*,#77938,.T.); +#77938 = EDGE_CURVE('',#77931,#77875,#77939,.T.); +#77939 = LINE('',#77940,#77941); +#77940 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#77941 = VECTOR('',#77942,1.); +#77942 = DIRECTION('',(1.,0.,0.)); +#77943 = ORIENTED_EDGE('',*,*,#77891,.T.); +#77944 = PLANE('',#77945); +#77945 = AXIS2_PLACEMENT_3D('',#77946,#77947,#77948); +#77946 = CARTESIAN_POINT('',(0.,-1.35,0.19)); +#77947 = DIRECTION('',(0.,0.,1.)); +#77948 = DIRECTION('',(1.,0.,-0.)); +#77949 = ADVANCED_FACE('',(#77950),#77968,.F.); +#77950 = FACE_BOUND('',#77951,.F.); +#77951 = EDGE_LOOP('',(#77952,#77953,#77954,#77962)); +#77952 = ORIENTED_EDGE('',*,*,#77836,.F.); +#77953 = ORIENTED_EDGE('',*,*,#77915,.F.); +#77954 = ORIENTED_EDGE('',*,*,#77955,.F.); +#77955 = EDGE_CURVE('',#77956,#77906,#77958,.T.); +#77956 = VERTEX_POINT('',#77957); +#77957 = CARTESIAN_POINT('',(-6.E-02,-1.275,-1.61)); +#77958 = LINE('',#77959,#77960); +#77959 = CARTESIAN_POINT('',(-0.11,-1.275,-1.61)); +#77960 = VECTOR('',#77961,1.); +#77961 = DIRECTION('',(1.,0.,0.)); +#77962 = ORIENTED_EDGE('',*,*,#77963,.F.); +#77963 = EDGE_CURVE('',#77837,#77956,#77964,.T.); +#77964 = LINE('',#77965,#77966); +#77965 = CARTESIAN_POINT('',(-6.E-02,-1.425,-1.61)); +#77966 = VECTOR('',#77967,1.); +#77967 = DIRECTION('',(0.,1.,0.)); +#77968 = PLANE('',#77969); +#77969 = AXIS2_PLACEMENT_3D('',#77970,#77971,#77972); +#77970 = CARTESIAN_POINT('',(0.,-1.35,-1.61)); +#77971 = DIRECTION('',(0.,0.,1.)); +#77972 = DIRECTION('',(1.,0.,-0.)); +#77973 = ADVANCED_FACE('',(#77974),#77992,.F.); +#77974 = FACE_BOUND('',#77975,.F.); +#77975 = EDGE_LOOP('',(#77976,#77977,#77985,#77991)); +#77976 = ORIENTED_EDGE('',*,*,#77852,.T.); +#77977 = ORIENTED_EDGE('',*,*,#77978,.T.); +#77978 = EDGE_CURVE('',#77845,#77979,#77981,.T.); +#77979 = VERTEX_POINT('',#77980); +#77980 = CARTESIAN_POINT('',(-0.11,-1.275,-1.41)); +#77981 = LINE('',#77982,#77983); +#77982 = CARTESIAN_POINT('',(-0.11,-1.425,-1.41)); +#77983 = VECTOR('',#77984,1.); +#77984 = DIRECTION('',(0.,1.,0.)); +#77985 = ORIENTED_EDGE('',*,*,#77986,.F.); +#77986 = EDGE_CURVE('',#77931,#77979,#77987,.T.); +#77987 = LINE('',#77988,#77989); +#77988 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#77989 = VECTOR('',#77990,1.); +#77990 = DIRECTION('',(0.,0.,-1.)); +#77991 = ORIENTED_EDGE('',*,*,#77930,.F.); +#77992 = PLANE('',#77993); +#77993 = AXIS2_PLACEMENT_3D('',#77994,#77995,#77996); +#77994 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77995 = DIRECTION('',(1.,0.,0.)); +#77996 = DIRECTION('',(-0.,1.,0.)); +#77997 = ADVANCED_FACE('',(#77998),#78009,.T.); +#77998 = FACE_BOUND('',#77999,.T.); +#77999 = EDGE_LOOP('',(#78000,#78001,#78002,#78008)); +#78000 = ORIENTED_EDGE('',*,*,#77844,.F.); +#78001 = ORIENTED_EDGE('',*,*,#77978,.T.); +#78002 = ORIENTED_EDGE('',*,*,#78003,.T.); +#78003 = EDGE_CURVE('',#77979,#77956,#78004,.T.); +#78004 = LINE('',#78005,#78006); +#78005 = CARTESIAN_POINT('',(-0.285735294118,-1.275,-0.707058823529)); +#78006 = VECTOR('',#78007,1.); +#78007 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78008 = ORIENTED_EDGE('',*,*,#77963,.F.); +#78009 = PLANE('',#78010); +#78010 = AXIS2_PLACEMENT_3D('',#78011,#78012,#78013); +#78011 = CARTESIAN_POINT('',(-8.5E-02,-1.425,-1.51)); +#78012 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78013 = DIRECTION('',(0.,1.,0.)); +#78014 = ADVANCED_FACE('',(#78015),#78023,.F.); +#78015 = FACE_BOUND('',#78016,.F.); +#78016 = EDGE_LOOP('',(#78017,#78018,#78019,#78020,#78021,#78022)); +#78017 = ORIENTED_EDGE('',*,*,#77986,.T.); +#78018 = ORIENTED_EDGE('',*,*,#78003,.T.); +#78019 = ORIENTED_EDGE('',*,*,#77955,.T.); +#78020 = ORIENTED_EDGE('',*,*,#77905,.F.); +#78021 = ORIENTED_EDGE('',*,*,#77874,.F.); +#78022 = ORIENTED_EDGE('',*,*,#77938,.F.); +#78023 = PLANE('',#78024); +#78024 = AXIS2_PLACEMENT_3D('',#78025,#78026,#78027); +#78025 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#78026 = DIRECTION('',(0.,-1.,0.)); +#78027 = DIRECTION('',(1.,0.,0.)); +#78028 = MANIFOLD_SOLID_BREP('',#78029); +#78029 = CLOSED_SHELL('',(#78030,#78086,#78117,#78141,#78165,#78189, + #78213,#78230)); +#78030 = ADVANCED_FACE('',(#78031),#78081,.F.); +#78031 = FACE_BOUND('',#78032,.F.); +#78032 = EDGE_LOOP('',(#78033,#78043,#78051,#78059,#78067,#78075)); +#78033 = ORIENTED_EDGE('',*,*,#78034,.T.); +#78034 = EDGE_CURVE('',#78035,#78037,#78039,.T.); +#78035 = VERTEX_POINT('',#78036); +#78036 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78037 = VERTEX_POINT('',#78038); +#78038 = CARTESIAN_POINT('',(0.11,-7.5E-02,-1.41)); +#78039 = LINE('',#78040,#78041); +#78040 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78041 = VECTOR('',#78042,1.); +#78042 = DIRECTION('',(0.,0.,-1.)); +#78043 = ORIENTED_EDGE('',*,*,#78044,.T.); +#78044 = EDGE_CURVE('',#78037,#78045,#78047,.T.); +#78045 = VERTEX_POINT('',#78046); +#78046 = CARTESIAN_POINT('',(6.E-02,-7.5E-02,-1.61)); +#78047 = LINE('',#78048,#78049); +#78048 = CARTESIAN_POINT('',(0.285735294118,-7.5E-02,-0.707058823529)); +#78049 = VECTOR('',#78050,1.); +#78050 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78051 = ORIENTED_EDGE('',*,*,#78052,.T.); +#78052 = EDGE_CURVE('',#78045,#78053,#78055,.T.); +#78053 = VERTEX_POINT('',#78054); +#78054 = CARTESIAN_POINT('',(-6.E-02,-7.5E-02,-1.61)); +#78055 = LINE('',#78056,#78057); +#78056 = CARTESIAN_POINT('',(0.11,-7.5E-02,-1.61)); +#78057 = VECTOR('',#78058,1.); +#78058 = DIRECTION('',(-1.,0.,0.)); +#78059 = ORIENTED_EDGE('',*,*,#78060,.F.); +#78060 = EDGE_CURVE('',#78061,#78053,#78063,.T.); +#78061 = VERTEX_POINT('',#78062); +#78062 = CARTESIAN_POINT('',(-0.11,-7.5E-02,-1.41)); +#78063 = LINE('',#78064,#78065); +#78064 = CARTESIAN_POINT('',(-0.279264705882,-7.5E-02,-0.732941176471)); +#78065 = VECTOR('',#78066,1.); +#78066 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78067 = ORIENTED_EDGE('',*,*,#78068,.F.); +#78068 = EDGE_CURVE('',#78069,#78061,#78071,.T.); +#78069 = VERTEX_POINT('',#78070); +#78070 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78071 = LINE('',#78072,#78073); +#78072 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78073 = VECTOR('',#78074,1.); +#78074 = DIRECTION('',(0.,0.,-1.)); +#78075 = ORIENTED_EDGE('',*,*,#78076,.F.); +#78076 = EDGE_CURVE('',#78035,#78069,#78077,.T.); +#78077 = LINE('',#78078,#78079); +#78078 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78079 = VECTOR('',#78080,1.); +#78080 = DIRECTION('',(-1.,0.,0.)); +#78081 = PLANE('',#78082); +#78082 = AXIS2_PLACEMENT_3D('',#78083,#78084,#78085); +#78083 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78084 = DIRECTION('',(0.,1.,0.)); +#78085 = DIRECTION('',(-1.,0.,0.)); +#78086 = ADVANCED_FACE('',(#78087),#78112,.F.); +#78087 = FACE_BOUND('',#78088,.F.); +#78088 = EDGE_LOOP('',(#78089,#78099,#78105,#78106)); +#78089 = ORIENTED_EDGE('',*,*,#78090,.T.); +#78090 = EDGE_CURVE('',#78091,#78093,#78095,.T.); +#78091 = VERTEX_POINT('',#78092); +#78092 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78093 = VERTEX_POINT('',#78094); +#78094 = CARTESIAN_POINT('',(0.11,7.5E-02,-1.41)); +#78095 = LINE('',#78096,#78097); +#78096 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78097 = VECTOR('',#78098,1.); +#78098 = DIRECTION('',(0.,0.,-1.)); +#78099 = ORIENTED_EDGE('',*,*,#78100,.T.); +#78100 = EDGE_CURVE('',#78093,#78037,#78101,.T.); +#78101 = LINE('',#78102,#78103); +#78102 = CARTESIAN_POINT('',(0.11,7.5E-02,-1.41)); +#78103 = VECTOR('',#78104,1.); +#78104 = DIRECTION('',(0.,-1.,0.)); +#78105 = ORIENTED_EDGE('',*,*,#78034,.F.); +#78106 = ORIENTED_EDGE('',*,*,#78107,.F.); +#78107 = EDGE_CURVE('',#78091,#78035,#78108,.T.); +#78108 = LINE('',#78109,#78110); +#78109 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78110 = VECTOR('',#78111,1.); +#78111 = DIRECTION('',(0.,-1.,0.)); +#78112 = PLANE('',#78113); +#78113 = AXIS2_PLACEMENT_3D('',#78114,#78115,#78116); +#78114 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78115 = DIRECTION('',(-1.,-0.,-0.)); +#78116 = DIRECTION('',(0.,-1.,0.)); +#78117 = ADVANCED_FACE('',(#78118),#78136,.T.); +#78118 = FACE_BOUND('',#78119,.T.); +#78119 = EDGE_LOOP('',(#78120,#78128,#78129,#78130)); +#78120 = ORIENTED_EDGE('',*,*,#78121,.F.); +#78121 = EDGE_CURVE('',#78093,#78122,#78124,.T.); +#78122 = VERTEX_POINT('',#78123); +#78123 = CARTESIAN_POINT('',(6.E-02,7.5E-02,-1.61)); +#78124 = LINE('',#78125,#78126); +#78125 = CARTESIAN_POINT('',(0.279264705882,7.5E-02,-0.732941176471)); +#78126 = VECTOR('',#78127,1.); +#78127 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78128 = ORIENTED_EDGE('',*,*,#78100,.T.); +#78129 = ORIENTED_EDGE('',*,*,#78044,.T.); +#78130 = ORIENTED_EDGE('',*,*,#78131,.F.); +#78131 = EDGE_CURVE('',#78122,#78045,#78132,.T.); +#78132 = LINE('',#78133,#78134); +#78133 = CARTESIAN_POINT('',(6.E-02,7.5E-02,-1.61)); +#78134 = VECTOR('',#78135,1.); +#78135 = DIRECTION('',(0.,-1.,0.)); +#78136 = PLANE('',#78137); +#78137 = AXIS2_PLACEMENT_3D('',#78138,#78139,#78140); +#78138 = CARTESIAN_POINT('',(8.5E-02,7.5E-02,-1.51)); +#78139 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78140 = DIRECTION('',(0.,-1.,0.)); +#78141 = ADVANCED_FACE('',(#78142),#78160,.T.); +#78142 = FACE_BOUND('',#78143,.F.); +#78143 = EDGE_LOOP('',(#78144,#78145,#78153,#78159)); +#78144 = ORIENTED_EDGE('',*,*,#78076,.T.); +#78145 = ORIENTED_EDGE('',*,*,#78146,.T.); +#78146 = EDGE_CURVE('',#78069,#78147,#78149,.T.); +#78147 = VERTEX_POINT('',#78148); +#78148 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78149 = LINE('',#78150,#78151); +#78150 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78151 = VECTOR('',#78152,1.); +#78152 = DIRECTION('',(0.,1.,0.)); +#78153 = ORIENTED_EDGE('',*,*,#78154,.T.); +#78154 = EDGE_CURVE('',#78147,#78091,#78155,.T.); +#78155 = LINE('',#78156,#78157); +#78156 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78157 = VECTOR('',#78158,1.); +#78158 = DIRECTION('',(1.,0.,0.)); +#78159 = ORIENTED_EDGE('',*,*,#78107,.T.); +#78160 = PLANE('',#78161); +#78161 = AXIS2_PLACEMENT_3D('',#78162,#78163,#78164); +#78162 = CARTESIAN_POINT('',(0.,0.,0.19)); +#78163 = DIRECTION('',(0.,0.,1.)); +#78164 = DIRECTION('',(1.,0.,-0.)); +#78165 = ADVANCED_FACE('',(#78166),#78184,.F.); +#78166 = FACE_BOUND('',#78167,.F.); +#78167 = EDGE_LOOP('',(#78168,#78169,#78170,#78178)); +#78168 = ORIENTED_EDGE('',*,*,#78052,.F.); +#78169 = ORIENTED_EDGE('',*,*,#78131,.F.); +#78170 = ORIENTED_EDGE('',*,*,#78171,.F.); +#78171 = EDGE_CURVE('',#78172,#78122,#78174,.T.); +#78172 = VERTEX_POINT('',#78173); +#78173 = CARTESIAN_POINT('',(-6.E-02,7.5E-02,-1.61)); +#78174 = LINE('',#78175,#78176); +#78175 = CARTESIAN_POINT('',(-0.11,7.5E-02,-1.61)); +#78176 = VECTOR('',#78177,1.); +#78177 = DIRECTION('',(1.,0.,0.)); +#78178 = ORIENTED_EDGE('',*,*,#78179,.F.); +#78179 = EDGE_CURVE('',#78053,#78172,#78180,.T.); +#78180 = LINE('',#78181,#78182); +#78181 = CARTESIAN_POINT('',(-6.E-02,-7.5E-02,-1.61)); +#78182 = VECTOR('',#78183,1.); +#78183 = DIRECTION('',(0.,1.,0.)); +#78184 = PLANE('',#78185); +#78185 = AXIS2_PLACEMENT_3D('',#78186,#78187,#78188); +#78186 = CARTESIAN_POINT('',(0.,0.,-1.61)); +#78187 = DIRECTION('',(0.,0.,1.)); +#78188 = DIRECTION('',(1.,0.,-0.)); +#78189 = ADVANCED_FACE('',(#78190),#78208,.F.); +#78190 = FACE_BOUND('',#78191,.F.); +#78191 = EDGE_LOOP('',(#78192,#78193,#78201,#78207)); +#78192 = ORIENTED_EDGE('',*,*,#78068,.T.); +#78193 = ORIENTED_EDGE('',*,*,#78194,.T.); +#78194 = EDGE_CURVE('',#78061,#78195,#78197,.T.); +#78195 = VERTEX_POINT('',#78196); +#78196 = CARTESIAN_POINT('',(-0.11,7.5E-02,-1.41)); +#78197 = LINE('',#78198,#78199); +#78198 = CARTESIAN_POINT('',(-0.11,-7.5E-02,-1.41)); +#78199 = VECTOR('',#78200,1.); +#78200 = DIRECTION('',(0.,1.,0.)); +#78201 = ORIENTED_EDGE('',*,*,#78202,.F.); +#78202 = EDGE_CURVE('',#78147,#78195,#78203,.T.); +#78203 = LINE('',#78204,#78205); +#78204 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78205 = VECTOR('',#78206,1.); +#78206 = DIRECTION('',(0.,0.,-1.)); +#78207 = ORIENTED_EDGE('',*,*,#78146,.F.); +#78208 = PLANE('',#78209); +#78209 = AXIS2_PLACEMENT_3D('',#78210,#78211,#78212); +#78210 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78211 = DIRECTION('',(1.,0.,0.)); +#78212 = DIRECTION('',(-0.,1.,0.)); +#78213 = ADVANCED_FACE('',(#78214),#78225,.T.); +#78214 = FACE_BOUND('',#78215,.T.); +#78215 = EDGE_LOOP('',(#78216,#78217,#78218,#78224)); +#78216 = ORIENTED_EDGE('',*,*,#78060,.F.); +#78217 = ORIENTED_EDGE('',*,*,#78194,.T.); +#78218 = ORIENTED_EDGE('',*,*,#78219,.T.); +#78219 = EDGE_CURVE('',#78195,#78172,#78220,.T.); +#78220 = LINE('',#78221,#78222); +#78221 = CARTESIAN_POINT('',(-0.285735294118,7.5E-02,-0.707058823529)); +#78222 = VECTOR('',#78223,1.); +#78223 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78224 = ORIENTED_EDGE('',*,*,#78179,.F.); +#78225 = PLANE('',#78226); +#78226 = AXIS2_PLACEMENT_3D('',#78227,#78228,#78229); +#78227 = CARTESIAN_POINT('',(-8.5E-02,-7.5E-02,-1.51)); +#78228 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78229 = DIRECTION('',(0.,1.,0.)); +#78230 = ADVANCED_FACE('',(#78231),#78239,.F.); +#78231 = FACE_BOUND('',#78232,.F.); +#78232 = EDGE_LOOP('',(#78233,#78234,#78235,#78236,#78237,#78238)); +#78233 = ORIENTED_EDGE('',*,*,#78202,.T.); +#78234 = ORIENTED_EDGE('',*,*,#78219,.T.); +#78235 = ORIENTED_EDGE('',*,*,#78171,.T.); +#78236 = ORIENTED_EDGE('',*,*,#78121,.F.); +#78237 = ORIENTED_EDGE('',*,*,#78090,.F.); +#78238 = ORIENTED_EDGE('',*,*,#78154,.F.); +#78239 = PLANE('',#78240); +#78240 = AXIS2_PLACEMENT_3D('',#78241,#78242,#78243); +#78241 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78242 = DIRECTION('',(0.,-1.,0.)); +#78243 = DIRECTION('',(1.,0.,0.)); +#78244 = MANIFOLD_SOLID_BREP('',#78245); +#78245 = CLOSED_SHELL('',(#78246,#78302,#78333,#78357,#78381,#78405, + #78429,#78446)); +#78246 = ADVANCED_FACE('',(#78247),#78297,.F.); +#78247 = FACE_BOUND('',#78248,.F.); +#78248 = EDGE_LOOP('',(#78249,#78259,#78267,#78275,#78283,#78291)); +#78249 = ORIENTED_EDGE('',*,*,#78250,.T.); +#78250 = EDGE_CURVE('',#78251,#78253,#78255,.T.); +#78251 = VERTEX_POINT('',#78252); +#78252 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78253 = VERTEX_POINT('',#78254); +#78254 = CARTESIAN_POINT('',(0.96,-1.425,-1.41)); +#78255 = LINE('',#78256,#78257); +#78256 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78257 = VECTOR('',#78258,1.); +#78258 = DIRECTION('',(0.,0.,-1.)); +#78259 = ORIENTED_EDGE('',*,*,#78260,.T.); +#78260 = EDGE_CURVE('',#78253,#78261,#78263,.T.); +#78261 = VERTEX_POINT('',#78262); +#78262 = CARTESIAN_POINT('',(0.91,-1.425,-1.61)); +#78263 = LINE('',#78264,#78265); +#78264 = CARTESIAN_POINT('',(1.135735294118,-1.425,-0.707058823529)); +#78265 = VECTOR('',#78266,1.); +#78266 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78267 = ORIENTED_EDGE('',*,*,#78268,.T.); +#78268 = EDGE_CURVE('',#78261,#78269,#78271,.T.); +#78269 = VERTEX_POINT('',#78270); +#78270 = CARTESIAN_POINT('',(0.79,-1.425,-1.61)); +#78271 = LINE('',#78272,#78273); +#78272 = CARTESIAN_POINT('',(0.96,-1.425,-1.61)); +#78273 = VECTOR('',#78274,1.); +#78274 = DIRECTION('',(-1.,0.,0.)); +#78275 = ORIENTED_EDGE('',*,*,#78276,.F.); +#78276 = EDGE_CURVE('',#78277,#78269,#78279,.T.); +#78277 = VERTEX_POINT('',#78278); +#78278 = CARTESIAN_POINT('',(0.74,-1.425,-1.41)); +#78279 = LINE('',#78280,#78281); +#78280 = CARTESIAN_POINT('',(0.570735294118,-1.425,-0.732941176471)); +#78281 = VECTOR('',#78282,1.); +#78282 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78283 = ORIENTED_EDGE('',*,*,#78284,.F.); +#78284 = EDGE_CURVE('',#78285,#78277,#78287,.T.); +#78285 = VERTEX_POINT('',#78286); +#78286 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78287 = LINE('',#78288,#78289); +#78288 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78289 = VECTOR('',#78290,1.); +#78290 = DIRECTION('',(0.,0.,-1.)); +#78291 = ORIENTED_EDGE('',*,*,#78292,.F.); +#78292 = EDGE_CURVE('',#78251,#78285,#78293,.T.); +#78293 = LINE('',#78294,#78295); +#78294 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78295 = VECTOR('',#78296,1.); +#78296 = DIRECTION('',(-1.,0.,0.)); +#78297 = PLANE('',#78298); +#78298 = AXIS2_PLACEMENT_3D('',#78299,#78300,#78301); +#78299 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78300 = DIRECTION('',(0.,1.,0.)); +#78301 = DIRECTION('',(-1.,0.,0.)); +#78302 = ADVANCED_FACE('',(#78303),#78328,.F.); +#78303 = FACE_BOUND('',#78304,.F.); +#78304 = EDGE_LOOP('',(#78305,#78315,#78321,#78322)); +#78305 = ORIENTED_EDGE('',*,*,#78306,.T.); +#78306 = EDGE_CURVE('',#78307,#78309,#78311,.T.); +#78307 = VERTEX_POINT('',#78308); +#78308 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78309 = VERTEX_POINT('',#78310); +#78310 = CARTESIAN_POINT('',(0.96,-1.275,-1.41)); +#78311 = LINE('',#78312,#78313); +#78312 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78313 = VECTOR('',#78314,1.); +#78314 = DIRECTION('',(0.,0.,-1.)); +#78315 = ORIENTED_EDGE('',*,*,#78316,.T.); +#78316 = EDGE_CURVE('',#78309,#78253,#78317,.T.); +#78317 = LINE('',#78318,#78319); +#78318 = CARTESIAN_POINT('',(0.96,-1.275,-1.41)); +#78319 = VECTOR('',#78320,1.); +#78320 = DIRECTION('',(0.,-1.,0.)); +#78321 = ORIENTED_EDGE('',*,*,#78250,.F.); +#78322 = ORIENTED_EDGE('',*,*,#78323,.F.); +#78323 = EDGE_CURVE('',#78307,#78251,#78324,.T.); +#78324 = LINE('',#78325,#78326); +#78325 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78326 = VECTOR('',#78327,1.); +#78327 = DIRECTION('',(0.,-1.,0.)); +#78328 = PLANE('',#78329); +#78329 = AXIS2_PLACEMENT_3D('',#78330,#78331,#78332); +#78330 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78331 = DIRECTION('',(-1.,-0.,-0.)); +#78332 = DIRECTION('',(0.,-1.,0.)); +#78333 = ADVANCED_FACE('',(#78334),#78352,.T.); +#78334 = FACE_BOUND('',#78335,.T.); +#78335 = EDGE_LOOP('',(#78336,#78344,#78345,#78346)); +#78336 = ORIENTED_EDGE('',*,*,#78337,.F.); +#78337 = EDGE_CURVE('',#78309,#78338,#78340,.T.); +#78338 = VERTEX_POINT('',#78339); +#78339 = CARTESIAN_POINT('',(0.91,-1.275,-1.61)); +#78340 = LINE('',#78341,#78342); +#78341 = CARTESIAN_POINT('',(1.129264705882,-1.275,-0.732941176471)); +#78342 = VECTOR('',#78343,1.); +#78343 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78344 = ORIENTED_EDGE('',*,*,#78316,.T.); +#78345 = ORIENTED_EDGE('',*,*,#78260,.T.); +#78346 = ORIENTED_EDGE('',*,*,#78347,.F.); +#78347 = EDGE_CURVE('',#78338,#78261,#78348,.T.); +#78348 = LINE('',#78349,#78350); +#78349 = CARTESIAN_POINT('',(0.91,-1.275,-1.61)); +#78350 = VECTOR('',#78351,1.); +#78351 = DIRECTION('',(0.,-1.,0.)); +#78352 = PLANE('',#78353); +#78353 = AXIS2_PLACEMENT_3D('',#78354,#78355,#78356); +#78354 = CARTESIAN_POINT('',(0.935,-1.275,-1.51)); +#78355 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78356 = DIRECTION('',(0.,-1.,0.)); +#78357 = ADVANCED_FACE('',(#78358),#78376,.T.); +#78358 = FACE_BOUND('',#78359,.F.); +#78359 = EDGE_LOOP('',(#78360,#78361,#78369,#78375)); +#78360 = ORIENTED_EDGE('',*,*,#78292,.T.); +#78361 = ORIENTED_EDGE('',*,*,#78362,.T.); +#78362 = EDGE_CURVE('',#78285,#78363,#78365,.T.); +#78363 = VERTEX_POINT('',#78364); +#78364 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78365 = LINE('',#78366,#78367); +#78366 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78367 = VECTOR('',#78368,1.); +#78368 = DIRECTION('',(0.,1.,0.)); +#78369 = ORIENTED_EDGE('',*,*,#78370,.T.); +#78370 = EDGE_CURVE('',#78363,#78307,#78371,.T.); +#78371 = LINE('',#78372,#78373); +#78372 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78373 = VECTOR('',#78374,1.); +#78374 = DIRECTION('',(1.,0.,0.)); +#78375 = ORIENTED_EDGE('',*,*,#78323,.T.); +#78376 = PLANE('',#78377); +#78377 = AXIS2_PLACEMENT_3D('',#78378,#78379,#78380); +#78378 = CARTESIAN_POINT('',(0.85,-1.35,0.19)); +#78379 = DIRECTION('',(0.,0.,1.)); +#78380 = DIRECTION('',(1.,0.,-0.)); +#78381 = ADVANCED_FACE('',(#78382),#78400,.F.); +#78382 = FACE_BOUND('',#78383,.F.); +#78383 = EDGE_LOOP('',(#78384,#78385,#78386,#78394)); +#78384 = ORIENTED_EDGE('',*,*,#78268,.F.); +#78385 = ORIENTED_EDGE('',*,*,#78347,.F.); +#78386 = ORIENTED_EDGE('',*,*,#78387,.F.); +#78387 = EDGE_CURVE('',#78388,#78338,#78390,.T.); +#78388 = VERTEX_POINT('',#78389); +#78389 = CARTESIAN_POINT('',(0.79,-1.275,-1.61)); +#78390 = LINE('',#78391,#78392); +#78391 = CARTESIAN_POINT('',(0.74,-1.275,-1.61)); +#78392 = VECTOR('',#78393,1.); +#78393 = DIRECTION('',(1.,0.,0.)); +#78394 = ORIENTED_EDGE('',*,*,#78395,.F.); +#78395 = EDGE_CURVE('',#78269,#78388,#78396,.T.); +#78396 = LINE('',#78397,#78398); +#78397 = CARTESIAN_POINT('',(0.79,-1.425,-1.61)); +#78398 = VECTOR('',#78399,1.); +#78399 = DIRECTION('',(0.,1.,0.)); +#78400 = PLANE('',#78401); +#78401 = AXIS2_PLACEMENT_3D('',#78402,#78403,#78404); +#78402 = CARTESIAN_POINT('',(0.85,-1.35,-1.61)); +#78403 = DIRECTION('',(0.,0.,1.)); +#78404 = DIRECTION('',(1.,0.,-0.)); +#78405 = ADVANCED_FACE('',(#78406),#78424,.F.); +#78406 = FACE_BOUND('',#78407,.F.); +#78407 = EDGE_LOOP('',(#78408,#78409,#78417,#78423)); +#78408 = ORIENTED_EDGE('',*,*,#78284,.T.); +#78409 = ORIENTED_EDGE('',*,*,#78410,.T.); +#78410 = EDGE_CURVE('',#78277,#78411,#78413,.T.); +#78411 = VERTEX_POINT('',#78412); +#78412 = CARTESIAN_POINT('',(0.74,-1.275,-1.41)); +#78413 = LINE('',#78414,#78415); +#78414 = CARTESIAN_POINT('',(0.74,-1.425,-1.41)); +#78415 = VECTOR('',#78416,1.); +#78416 = DIRECTION('',(0.,1.,0.)); +#78417 = ORIENTED_EDGE('',*,*,#78418,.F.); +#78418 = EDGE_CURVE('',#78363,#78411,#78419,.T.); +#78419 = LINE('',#78420,#78421); +#78420 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78421 = VECTOR('',#78422,1.); +#78422 = DIRECTION('',(0.,0.,-1.)); +#78423 = ORIENTED_EDGE('',*,*,#78362,.F.); +#78424 = PLANE('',#78425); +#78425 = AXIS2_PLACEMENT_3D('',#78426,#78427,#78428); +#78426 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78427 = DIRECTION('',(1.,0.,0.)); +#78428 = DIRECTION('',(-0.,1.,0.)); +#78429 = ADVANCED_FACE('',(#78430),#78441,.T.); +#78430 = FACE_BOUND('',#78431,.T.); +#78431 = EDGE_LOOP('',(#78432,#78433,#78434,#78440)); +#78432 = ORIENTED_EDGE('',*,*,#78276,.F.); +#78433 = ORIENTED_EDGE('',*,*,#78410,.T.); +#78434 = ORIENTED_EDGE('',*,*,#78435,.T.); +#78435 = EDGE_CURVE('',#78411,#78388,#78436,.T.); +#78436 = LINE('',#78437,#78438); +#78437 = CARTESIAN_POINT('',(0.564264705882,-1.275,-0.707058823529)); +#78438 = VECTOR('',#78439,1.); +#78439 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78440 = ORIENTED_EDGE('',*,*,#78395,.F.); +#78441 = PLANE('',#78442); +#78442 = AXIS2_PLACEMENT_3D('',#78443,#78444,#78445); +#78443 = CARTESIAN_POINT('',(0.765,-1.425,-1.51)); +#78444 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78445 = DIRECTION('',(0.,1.,0.)); +#78446 = ADVANCED_FACE('',(#78447),#78455,.F.); +#78447 = FACE_BOUND('',#78448,.F.); +#78448 = EDGE_LOOP('',(#78449,#78450,#78451,#78452,#78453,#78454)); +#78449 = ORIENTED_EDGE('',*,*,#78418,.T.); +#78450 = ORIENTED_EDGE('',*,*,#78435,.T.); +#78451 = ORIENTED_EDGE('',*,*,#78387,.T.); +#78452 = ORIENTED_EDGE('',*,*,#78337,.F.); +#78453 = ORIENTED_EDGE('',*,*,#78306,.F.); +#78454 = ORIENTED_EDGE('',*,*,#78370,.F.); +#78455 = PLANE('',#78456); +#78456 = AXIS2_PLACEMENT_3D('',#78457,#78458,#78459); +#78457 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78458 = DIRECTION('',(0.,-1.,0.)); +#78459 = DIRECTION('',(1.,0.,0.)); +#78460 = MANIFOLD_SOLID_BREP('',#78461); +#78461 = CLOSED_SHELL('',(#78462,#78518,#78549,#78573,#78597,#78621, + #78645,#78662)); +#78462 = ADVANCED_FACE('',(#78463),#78513,.F.); +#78463 = FACE_BOUND('',#78464,.F.); +#78464 = EDGE_LOOP('',(#78465,#78475,#78483,#78491,#78499,#78507)); +#78465 = ORIENTED_EDGE('',*,*,#78466,.T.); +#78466 = EDGE_CURVE('',#78467,#78469,#78471,.T.); +#78467 = VERTEX_POINT('',#78468); +#78468 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78469 = VERTEX_POINT('',#78470); +#78470 = CARTESIAN_POINT('',(0.96,-7.5E-02,-1.41)); +#78471 = LINE('',#78472,#78473); +#78472 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78473 = VECTOR('',#78474,1.); +#78474 = DIRECTION('',(0.,0.,-1.)); +#78475 = ORIENTED_EDGE('',*,*,#78476,.T.); +#78476 = EDGE_CURVE('',#78469,#78477,#78479,.T.); +#78477 = VERTEX_POINT('',#78478); +#78478 = CARTESIAN_POINT('',(0.91,-7.5E-02,-1.61)); +#78479 = LINE('',#78480,#78481); +#78480 = CARTESIAN_POINT('',(1.135735294118,-7.5E-02,-0.707058823529)); +#78481 = VECTOR('',#78482,1.); +#78482 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78483 = ORIENTED_EDGE('',*,*,#78484,.T.); +#78484 = EDGE_CURVE('',#78477,#78485,#78487,.T.); +#78485 = VERTEX_POINT('',#78486); +#78486 = CARTESIAN_POINT('',(0.79,-7.5E-02,-1.61)); +#78487 = LINE('',#78488,#78489); +#78488 = CARTESIAN_POINT('',(0.96,-7.5E-02,-1.61)); +#78489 = VECTOR('',#78490,1.); +#78490 = DIRECTION('',(-1.,0.,0.)); +#78491 = ORIENTED_EDGE('',*,*,#78492,.F.); +#78492 = EDGE_CURVE('',#78493,#78485,#78495,.T.); +#78493 = VERTEX_POINT('',#78494); +#78494 = CARTESIAN_POINT('',(0.74,-7.5E-02,-1.41)); +#78495 = LINE('',#78496,#78497); +#78496 = CARTESIAN_POINT('',(0.570735294118,-7.5E-02,-0.732941176471)); +#78497 = VECTOR('',#78498,1.); +#78498 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78499 = ORIENTED_EDGE('',*,*,#78500,.F.); +#78500 = EDGE_CURVE('',#78501,#78493,#78503,.T.); +#78501 = VERTEX_POINT('',#78502); +#78502 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78503 = LINE('',#78504,#78505); +#78504 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78505 = VECTOR('',#78506,1.); +#78506 = DIRECTION('',(0.,0.,-1.)); +#78507 = ORIENTED_EDGE('',*,*,#78508,.F.); +#78508 = EDGE_CURVE('',#78467,#78501,#78509,.T.); +#78509 = LINE('',#78510,#78511); +#78510 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78511 = VECTOR('',#78512,1.); +#78512 = DIRECTION('',(-1.,0.,0.)); +#78513 = PLANE('',#78514); +#78514 = AXIS2_PLACEMENT_3D('',#78515,#78516,#78517); +#78515 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78516 = DIRECTION('',(0.,1.,0.)); +#78517 = DIRECTION('',(-1.,0.,0.)); +#78518 = ADVANCED_FACE('',(#78519),#78544,.F.); +#78519 = FACE_BOUND('',#78520,.F.); +#78520 = EDGE_LOOP('',(#78521,#78531,#78537,#78538)); +#78521 = ORIENTED_EDGE('',*,*,#78522,.T.); +#78522 = EDGE_CURVE('',#78523,#78525,#78527,.T.); +#78523 = VERTEX_POINT('',#78524); +#78524 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78525 = VERTEX_POINT('',#78526); +#78526 = CARTESIAN_POINT('',(0.96,7.5E-02,-1.41)); +#78527 = LINE('',#78528,#78529); +#78528 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78529 = VECTOR('',#78530,1.); +#78530 = DIRECTION('',(0.,0.,-1.)); +#78531 = ORIENTED_EDGE('',*,*,#78532,.T.); +#78532 = EDGE_CURVE('',#78525,#78469,#78533,.T.); +#78533 = LINE('',#78534,#78535); +#78534 = CARTESIAN_POINT('',(0.96,7.5E-02,-1.41)); +#78535 = VECTOR('',#78536,1.); +#78536 = DIRECTION('',(0.,-1.,0.)); +#78537 = ORIENTED_EDGE('',*,*,#78466,.F.); +#78538 = ORIENTED_EDGE('',*,*,#78539,.F.); +#78539 = EDGE_CURVE('',#78523,#78467,#78540,.T.); +#78540 = LINE('',#78541,#78542); +#78541 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78542 = VECTOR('',#78543,1.); +#78543 = DIRECTION('',(0.,-1.,0.)); +#78544 = PLANE('',#78545); +#78545 = AXIS2_PLACEMENT_3D('',#78546,#78547,#78548); +#78546 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78547 = DIRECTION('',(-1.,-0.,-0.)); +#78548 = DIRECTION('',(0.,-1.,0.)); +#78549 = ADVANCED_FACE('',(#78550),#78568,.T.); +#78550 = FACE_BOUND('',#78551,.T.); +#78551 = EDGE_LOOP('',(#78552,#78560,#78561,#78562)); +#78552 = ORIENTED_EDGE('',*,*,#78553,.F.); +#78553 = EDGE_CURVE('',#78525,#78554,#78556,.T.); +#78554 = VERTEX_POINT('',#78555); +#78555 = CARTESIAN_POINT('',(0.91,7.5E-02,-1.61)); +#78556 = LINE('',#78557,#78558); +#78557 = CARTESIAN_POINT('',(1.129264705882,7.5E-02,-0.732941176471)); +#78558 = VECTOR('',#78559,1.); +#78559 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78560 = ORIENTED_EDGE('',*,*,#78532,.T.); +#78561 = ORIENTED_EDGE('',*,*,#78476,.T.); +#78562 = ORIENTED_EDGE('',*,*,#78563,.F.); +#78563 = EDGE_CURVE('',#78554,#78477,#78564,.T.); +#78564 = LINE('',#78565,#78566); +#78565 = CARTESIAN_POINT('',(0.91,7.5E-02,-1.61)); +#78566 = VECTOR('',#78567,1.); +#78567 = DIRECTION('',(0.,-1.,0.)); +#78568 = PLANE('',#78569); +#78569 = AXIS2_PLACEMENT_3D('',#78570,#78571,#78572); +#78570 = CARTESIAN_POINT('',(0.935,7.5E-02,-1.51)); +#78571 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78572 = DIRECTION('',(0.,-1.,0.)); +#78573 = ADVANCED_FACE('',(#78574),#78592,.T.); +#78574 = FACE_BOUND('',#78575,.F.); +#78575 = EDGE_LOOP('',(#78576,#78577,#78585,#78591)); +#78576 = ORIENTED_EDGE('',*,*,#78508,.T.); +#78577 = ORIENTED_EDGE('',*,*,#78578,.T.); +#78578 = EDGE_CURVE('',#78501,#78579,#78581,.T.); +#78579 = VERTEX_POINT('',#78580); +#78580 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78581 = LINE('',#78582,#78583); +#78582 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78583 = VECTOR('',#78584,1.); +#78584 = DIRECTION('',(0.,1.,0.)); +#78585 = ORIENTED_EDGE('',*,*,#78586,.T.); +#78586 = EDGE_CURVE('',#78579,#78523,#78587,.T.); +#78587 = LINE('',#78588,#78589); +#78588 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78589 = VECTOR('',#78590,1.); +#78590 = DIRECTION('',(1.,0.,0.)); +#78591 = ORIENTED_EDGE('',*,*,#78539,.T.); +#78592 = PLANE('',#78593); +#78593 = AXIS2_PLACEMENT_3D('',#78594,#78595,#78596); +#78594 = CARTESIAN_POINT('',(0.85,0.,0.19)); +#78595 = DIRECTION('',(0.,0.,1.)); +#78596 = DIRECTION('',(1.,0.,-0.)); +#78597 = ADVANCED_FACE('',(#78598),#78616,.F.); +#78598 = FACE_BOUND('',#78599,.F.); +#78599 = EDGE_LOOP('',(#78600,#78601,#78602,#78610)); +#78600 = ORIENTED_EDGE('',*,*,#78484,.F.); +#78601 = ORIENTED_EDGE('',*,*,#78563,.F.); +#78602 = ORIENTED_EDGE('',*,*,#78603,.F.); +#78603 = EDGE_CURVE('',#78604,#78554,#78606,.T.); +#78604 = VERTEX_POINT('',#78605); +#78605 = CARTESIAN_POINT('',(0.79,7.5E-02,-1.61)); +#78606 = LINE('',#78607,#78608); +#78607 = CARTESIAN_POINT('',(0.74,7.5E-02,-1.61)); +#78608 = VECTOR('',#78609,1.); +#78609 = DIRECTION('',(1.,0.,0.)); +#78610 = ORIENTED_EDGE('',*,*,#78611,.F.); +#78611 = EDGE_CURVE('',#78485,#78604,#78612,.T.); +#78612 = LINE('',#78613,#78614); +#78613 = CARTESIAN_POINT('',(0.79,-7.5E-02,-1.61)); +#78614 = VECTOR('',#78615,1.); +#78615 = DIRECTION('',(0.,1.,0.)); +#78616 = PLANE('',#78617); +#78617 = AXIS2_PLACEMENT_3D('',#78618,#78619,#78620); +#78618 = CARTESIAN_POINT('',(0.85,0.,-1.61)); +#78619 = DIRECTION('',(0.,0.,1.)); +#78620 = DIRECTION('',(1.,0.,-0.)); +#78621 = ADVANCED_FACE('',(#78622),#78640,.F.); +#78622 = FACE_BOUND('',#78623,.F.); +#78623 = EDGE_LOOP('',(#78624,#78625,#78633,#78639)); +#78624 = ORIENTED_EDGE('',*,*,#78500,.T.); +#78625 = ORIENTED_EDGE('',*,*,#78626,.T.); +#78626 = EDGE_CURVE('',#78493,#78627,#78629,.T.); +#78627 = VERTEX_POINT('',#78628); +#78628 = CARTESIAN_POINT('',(0.74,7.5E-02,-1.41)); +#78629 = LINE('',#78630,#78631); +#78630 = CARTESIAN_POINT('',(0.74,-7.5E-02,-1.41)); +#78631 = VECTOR('',#78632,1.); +#78632 = DIRECTION('',(0.,1.,0.)); +#78633 = ORIENTED_EDGE('',*,*,#78634,.F.); +#78634 = EDGE_CURVE('',#78579,#78627,#78635,.T.); +#78635 = LINE('',#78636,#78637); +#78636 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78637 = VECTOR('',#78638,1.); +#78638 = DIRECTION('',(0.,0.,-1.)); +#78639 = ORIENTED_EDGE('',*,*,#78578,.F.); +#78640 = PLANE('',#78641); +#78641 = AXIS2_PLACEMENT_3D('',#78642,#78643,#78644); +#78642 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78643 = DIRECTION('',(1.,0.,0.)); +#78644 = DIRECTION('',(-0.,1.,0.)); +#78645 = ADVANCED_FACE('',(#78646),#78657,.T.); +#78646 = FACE_BOUND('',#78647,.T.); +#78647 = EDGE_LOOP('',(#78648,#78649,#78650,#78656)); +#78648 = ORIENTED_EDGE('',*,*,#78492,.F.); +#78649 = ORIENTED_EDGE('',*,*,#78626,.T.); +#78650 = ORIENTED_EDGE('',*,*,#78651,.T.); +#78651 = EDGE_CURVE('',#78627,#78604,#78652,.T.); +#78652 = LINE('',#78653,#78654); +#78653 = CARTESIAN_POINT('',(0.564264705882,7.5E-02,-0.707058823529)); +#78654 = VECTOR('',#78655,1.); +#78655 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78656 = ORIENTED_EDGE('',*,*,#78611,.F.); +#78657 = PLANE('',#78658); +#78658 = AXIS2_PLACEMENT_3D('',#78659,#78660,#78661); +#78659 = CARTESIAN_POINT('',(0.765,-7.5E-02,-1.51)); +#78660 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78661 = DIRECTION('',(0.,1.,0.)); +#78662 = ADVANCED_FACE('',(#78663),#78671,.F.); +#78663 = FACE_BOUND('',#78664,.F.); +#78664 = EDGE_LOOP('',(#78665,#78666,#78667,#78668,#78669,#78670)); +#78665 = ORIENTED_EDGE('',*,*,#78634,.T.); +#78666 = ORIENTED_EDGE('',*,*,#78651,.T.); +#78667 = ORIENTED_EDGE('',*,*,#78603,.T.); +#78668 = ORIENTED_EDGE('',*,*,#78553,.F.); +#78669 = ORIENTED_EDGE('',*,*,#78522,.F.); +#78670 = ORIENTED_EDGE('',*,*,#78586,.F.); +#78671 = PLANE('',#78672); +#78672 = AXIS2_PLACEMENT_3D('',#78673,#78674,#78675); +#78673 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78674 = DIRECTION('',(0.,-1.,0.)); +#78675 = DIRECTION('',(1.,0.,0.)); +#78676 = MANIFOLD_SOLID_BREP('',#78677); +#78677 = CLOSED_SHELL('',(#78678,#78734,#78765,#78789,#78813,#78837, + #78861,#78878)); +#78678 = ADVANCED_FACE('',(#78679),#78729,.F.); +#78679 = FACE_BOUND('',#78680,.F.); +#78680 = EDGE_LOOP('',(#78681,#78691,#78699,#78707,#78715,#78723)); +#78681 = ORIENTED_EDGE('',*,*,#78682,.T.); +#78682 = EDGE_CURVE('',#78683,#78685,#78687,.T.); +#78683 = VERTEX_POINT('',#78684); +#78684 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78685 = VERTEX_POINT('',#78686); +#78686 = CARTESIAN_POINT('',(1.81,-1.425,-1.41)); +#78687 = LINE('',#78688,#78689); +#78688 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78689 = VECTOR('',#78690,1.); +#78690 = DIRECTION('',(0.,0.,-1.)); +#78691 = ORIENTED_EDGE('',*,*,#78692,.T.); +#78692 = EDGE_CURVE('',#78685,#78693,#78695,.T.); +#78693 = VERTEX_POINT('',#78694); +#78694 = CARTESIAN_POINT('',(1.76,-1.425,-1.61)); +#78695 = LINE('',#78696,#78697); +#78696 = CARTESIAN_POINT('',(1.985735294118,-1.425,-0.707058823529)); +#78697 = VECTOR('',#78698,1.); +#78698 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78699 = ORIENTED_EDGE('',*,*,#78700,.T.); +#78700 = EDGE_CURVE('',#78693,#78701,#78703,.T.); +#78701 = VERTEX_POINT('',#78702); +#78702 = CARTESIAN_POINT('',(1.64,-1.425,-1.61)); +#78703 = LINE('',#78704,#78705); +#78704 = CARTESIAN_POINT('',(1.81,-1.425,-1.61)); +#78705 = VECTOR('',#78706,1.); +#78706 = DIRECTION('',(-1.,0.,0.)); +#78707 = ORIENTED_EDGE('',*,*,#78708,.F.); +#78708 = EDGE_CURVE('',#78709,#78701,#78711,.T.); +#78709 = VERTEX_POINT('',#78710); +#78710 = CARTESIAN_POINT('',(1.59,-1.425,-1.41)); +#78711 = LINE('',#78712,#78713); +#78712 = CARTESIAN_POINT('',(1.420735294118,-1.425,-0.732941176471)); +#78713 = VECTOR('',#78714,1.); +#78714 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78715 = ORIENTED_EDGE('',*,*,#78716,.F.); +#78716 = EDGE_CURVE('',#78717,#78709,#78719,.T.); +#78717 = VERTEX_POINT('',#78718); +#78718 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78719 = LINE('',#78720,#78721); +#78720 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78721 = VECTOR('',#78722,1.); +#78722 = DIRECTION('',(0.,0.,-1.)); +#78723 = ORIENTED_EDGE('',*,*,#78724,.F.); +#78724 = EDGE_CURVE('',#78683,#78717,#78725,.T.); +#78725 = LINE('',#78726,#78727); +#78726 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78727 = VECTOR('',#78728,1.); +#78728 = DIRECTION('',(-1.,0.,0.)); +#78729 = PLANE('',#78730); +#78730 = AXIS2_PLACEMENT_3D('',#78731,#78732,#78733); +#78731 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78732 = DIRECTION('',(0.,1.,0.)); +#78733 = DIRECTION('',(-1.,0.,0.)); +#78734 = ADVANCED_FACE('',(#78735),#78760,.F.); +#78735 = FACE_BOUND('',#78736,.F.); +#78736 = EDGE_LOOP('',(#78737,#78747,#78753,#78754)); +#78737 = ORIENTED_EDGE('',*,*,#78738,.T.); +#78738 = EDGE_CURVE('',#78739,#78741,#78743,.T.); +#78739 = VERTEX_POINT('',#78740); +#78740 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78741 = VERTEX_POINT('',#78742); +#78742 = CARTESIAN_POINT('',(1.81,-1.275,-1.41)); +#78743 = LINE('',#78744,#78745); +#78744 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78745 = VECTOR('',#78746,1.); +#78746 = DIRECTION('',(0.,0.,-1.)); +#78747 = ORIENTED_EDGE('',*,*,#78748,.T.); +#78748 = EDGE_CURVE('',#78741,#78685,#78749,.T.); +#78749 = LINE('',#78750,#78751); +#78750 = CARTESIAN_POINT('',(1.81,-1.275,-1.41)); +#78751 = VECTOR('',#78752,1.); +#78752 = DIRECTION('',(0.,-1.,0.)); +#78753 = ORIENTED_EDGE('',*,*,#78682,.F.); +#78754 = ORIENTED_EDGE('',*,*,#78755,.F.); +#78755 = EDGE_CURVE('',#78739,#78683,#78756,.T.); +#78756 = LINE('',#78757,#78758); +#78757 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78758 = VECTOR('',#78759,1.); +#78759 = DIRECTION('',(0.,-1.,0.)); +#78760 = PLANE('',#78761); +#78761 = AXIS2_PLACEMENT_3D('',#78762,#78763,#78764); +#78762 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78763 = DIRECTION('',(-1.,-0.,-0.)); +#78764 = DIRECTION('',(0.,-1.,0.)); +#78765 = ADVANCED_FACE('',(#78766),#78784,.T.); +#78766 = FACE_BOUND('',#78767,.T.); +#78767 = EDGE_LOOP('',(#78768,#78776,#78777,#78778)); +#78768 = ORIENTED_EDGE('',*,*,#78769,.F.); +#78769 = EDGE_CURVE('',#78741,#78770,#78772,.T.); +#78770 = VERTEX_POINT('',#78771); +#78771 = CARTESIAN_POINT('',(1.76,-1.275,-1.61)); +#78772 = LINE('',#78773,#78774); +#78773 = CARTESIAN_POINT('',(1.979264705882,-1.275,-0.732941176471)); +#78774 = VECTOR('',#78775,1.); +#78775 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78776 = ORIENTED_EDGE('',*,*,#78748,.T.); +#78777 = ORIENTED_EDGE('',*,*,#78692,.T.); +#78778 = ORIENTED_EDGE('',*,*,#78779,.F.); +#78779 = EDGE_CURVE('',#78770,#78693,#78780,.T.); +#78780 = LINE('',#78781,#78782); +#78781 = CARTESIAN_POINT('',(1.76,-1.275,-1.61)); +#78782 = VECTOR('',#78783,1.); +#78783 = DIRECTION('',(0.,-1.,0.)); +#78784 = PLANE('',#78785); +#78785 = AXIS2_PLACEMENT_3D('',#78786,#78787,#78788); +#78786 = CARTESIAN_POINT('',(1.785,-1.275,-1.51)); +#78787 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78788 = DIRECTION('',(0.,-1.,0.)); +#78789 = ADVANCED_FACE('',(#78790),#78808,.T.); +#78790 = FACE_BOUND('',#78791,.F.); +#78791 = EDGE_LOOP('',(#78792,#78793,#78801,#78807)); +#78792 = ORIENTED_EDGE('',*,*,#78724,.T.); +#78793 = ORIENTED_EDGE('',*,*,#78794,.T.); +#78794 = EDGE_CURVE('',#78717,#78795,#78797,.T.); +#78795 = VERTEX_POINT('',#78796); +#78796 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78797 = LINE('',#78798,#78799); +#78798 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78799 = VECTOR('',#78800,1.); +#78800 = DIRECTION('',(0.,1.,0.)); +#78801 = ORIENTED_EDGE('',*,*,#78802,.T.); +#78802 = EDGE_CURVE('',#78795,#78739,#78803,.T.); +#78803 = LINE('',#78804,#78805); +#78804 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78805 = VECTOR('',#78806,1.); +#78806 = DIRECTION('',(1.,0.,0.)); +#78807 = ORIENTED_EDGE('',*,*,#78755,.T.); +#78808 = PLANE('',#78809); +#78809 = AXIS2_PLACEMENT_3D('',#78810,#78811,#78812); +#78810 = CARTESIAN_POINT('',(1.7,-1.35,0.19)); +#78811 = DIRECTION('',(0.,0.,1.)); +#78812 = DIRECTION('',(1.,0.,-0.)); +#78813 = ADVANCED_FACE('',(#78814),#78832,.F.); +#78814 = FACE_BOUND('',#78815,.F.); +#78815 = EDGE_LOOP('',(#78816,#78817,#78818,#78826)); +#78816 = ORIENTED_EDGE('',*,*,#78700,.F.); +#78817 = ORIENTED_EDGE('',*,*,#78779,.F.); +#78818 = ORIENTED_EDGE('',*,*,#78819,.F.); +#78819 = EDGE_CURVE('',#78820,#78770,#78822,.T.); +#78820 = VERTEX_POINT('',#78821); +#78821 = CARTESIAN_POINT('',(1.64,-1.275,-1.61)); +#78822 = LINE('',#78823,#78824); +#78823 = CARTESIAN_POINT('',(1.59,-1.275,-1.61)); +#78824 = VECTOR('',#78825,1.); +#78825 = DIRECTION('',(1.,0.,0.)); +#78826 = ORIENTED_EDGE('',*,*,#78827,.F.); +#78827 = EDGE_CURVE('',#78701,#78820,#78828,.T.); +#78828 = LINE('',#78829,#78830); +#78829 = CARTESIAN_POINT('',(1.64,-1.425,-1.61)); +#78830 = VECTOR('',#78831,1.); +#78831 = DIRECTION('',(0.,1.,0.)); +#78832 = PLANE('',#78833); +#78833 = AXIS2_PLACEMENT_3D('',#78834,#78835,#78836); +#78834 = CARTESIAN_POINT('',(1.7,-1.35,-1.61)); +#78835 = DIRECTION('',(0.,0.,1.)); +#78836 = DIRECTION('',(1.,0.,-0.)); +#78837 = ADVANCED_FACE('',(#78838),#78856,.F.); +#78838 = FACE_BOUND('',#78839,.F.); +#78839 = EDGE_LOOP('',(#78840,#78841,#78849,#78855)); +#78840 = ORIENTED_EDGE('',*,*,#78716,.T.); +#78841 = ORIENTED_EDGE('',*,*,#78842,.T.); +#78842 = EDGE_CURVE('',#78709,#78843,#78845,.T.); +#78843 = VERTEX_POINT('',#78844); +#78844 = CARTESIAN_POINT('',(1.59,-1.275,-1.41)); +#78845 = LINE('',#78846,#78847); +#78846 = CARTESIAN_POINT('',(1.59,-1.425,-1.41)); +#78847 = VECTOR('',#78848,1.); +#78848 = DIRECTION('',(0.,1.,0.)); +#78849 = ORIENTED_EDGE('',*,*,#78850,.F.); +#78850 = EDGE_CURVE('',#78795,#78843,#78851,.T.); +#78851 = LINE('',#78852,#78853); +#78852 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78853 = VECTOR('',#78854,1.); +#78854 = DIRECTION('',(0.,0.,-1.)); +#78855 = ORIENTED_EDGE('',*,*,#78794,.F.); +#78856 = PLANE('',#78857); +#78857 = AXIS2_PLACEMENT_3D('',#78858,#78859,#78860); +#78858 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78859 = DIRECTION('',(1.,0.,0.)); +#78860 = DIRECTION('',(-0.,1.,0.)); +#78861 = ADVANCED_FACE('',(#78862),#78873,.T.); +#78862 = FACE_BOUND('',#78863,.T.); +#78863 = EDGE_LOOP('',(#78864,#78865,#78866,#78872)); +#78864 = ORIENTED_EDGE('',*,*,#78708,.F.); +#78865 = ORIENTED_EDGE('',*,*,#78842,.T.); +#78866 = ORIENTED_EDGE('',*,*,#78867,.T.); +#78867 = EDGE_CURVE('',#78843,#78820,#78868,.T.); +#78868 = LINE('',#78869,#78870); +#78869 = CARTESIAN_POINT('',(1.414264705882,-1.275,-0.707058823529)); +#78870 = VECTOR('',#78871,1.); +#78871 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78872 = ORIENTED_EDGE('',*,*,#78827,.F.); +#78873 = PLANE('',#78874); +#78874 = AXIS2_PLACEMENT_3D('',#78875,#78876,#78877); +#78875 = CARTESIAN_POINT('',(1.615,-1.425,-1.51)); +#78876 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78877 = DIRECTION('',(0.,1.,0.)); +#78878 = ADVANCED_FACE('',(#78879),#78887,.F.); +#78879 = FACE_BOUND('',#78880,.F.); +#78880 = EDGE_LOOP('',(#78881,#78882,#78883,#78884,#78885,#78886)); +#78881 = ORIENTED_EDGE('',*,*,#78850,.T.); +#78882 = ORIENTED_EDGE('',*,*,#78867,.T.); +#78883 = ORIENTED_EDGE('',*,*,#78819,.T.); +#78884 = ORIENTED_EDGE('',*,*,#78769,.F.); +#78885 = ORIENTED_EDGE('',*,*,#78738,.F.); +#78886 = ORIENTED_EDGE('',*,*,#78802,.F.); +#78887 = PLANE('',#78888); +#78888 = AXIS2_PLACEMENT_3D('',#78889,#78890,#78891); +#78889 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78890 = DIRECTION('',(0.,-1.,0.)); +#78891 = DIRECTION('',(1.,0.,0.)); +#78892 = MANIFOLD_SOLID_BREP('',#78893); +#78893 = CLOSED_SHELL('',(#78894,#78950,#78981,#79005,#79029,#79053, + #79077,#79094)); +#78894 = ADVANCED_FACE('',(#78895),#78945,.F.); +#78895 = FACE_BOUND('',#78896,.F.); +#78896 = EDGE_LOOP('',(#78897,#78907,#78915,#78923,#78931,#78939)); +#78897 = ORIENTED_EDGE('',*,*,#78898,.T.); +#78898 = EDGE_CURVE('',#78899,#78901,#78903,.T.); +#78899 = VERTEX_POINT('',#78900); +#78900 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78901 = VERTEX_POINT('',#78902); +#78902 = CARTESIAN_POINT('',(1.81,-7.5E-02,-1.41)); +#78903 = LINE('',#78904,#78905); +#78904 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78905 = VECTOR('',#78906,1.); +#78906 = DIRECTION('',(0.,0.,-1.)); +#78907 = ORIENTED_EDGE('',*,*,#78908,.T.); +#78908 = EDGE_CURVE('',#78901,#78909,#78911,.T.); +#78909 = VERTEX_POINT('',#78910); +#78910 = CARTESIAN_POINT('',(1.76,-7.5E-02,-1.61)); +#78911 = LINE('',#78912,#78913); +#78912 = CARTESIAN_POINT('',(1.985735294118,-7.5E-02,-0.707058823529)); +#78913 = VECTOR('',#78914,1.); +#78914 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78915 = ORIENTED_EDGE('',*,*,#78916,.T.); +#78916 = EDGE_CURVE('',#78909,#78917,#78919,.T.); +#78917 = VERTEX_POINT('',#78918); +#78918 = CARTESIAN_POINT('',(1.64,-7.5E-02,-1.61)); +#78919 = LINE('',#78920,#78921); +#78920 = CARTESIAN_POINT('',(1.81,-7.5E-02,-1.61)); +#78921 = VECTOR('',#78922,1.); +#78922 = DIRECTION('',(-1.,0.,0.)); +#78923 = ORIENTED_EDGE('',*,*,#78924,.F.); +#78924 = EDGE_CURVE('',#78925,#78917,#78927,.T.); +#78925 = VERTEX_POINT('',#78926); +#78926 = CARTESIAN_POINT('',(1.59,-7.5E-02,-1.41)); +#78927 = LINE('',#78928,#78929); +#78928 = CARTESIAN_POINT('',(1.420735294118,-7.5E-02,-0.732941176471)); +#78929 = VECTOR('',#78930,1.); +#78930 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78931 = ORIENTED_EDGE('',*,*,#78932,.F.); +#78932 = EDGE_CURVE('',#78933,#78925,#78935,.T.); +#78933 = VERTEX_POINT('',#78934); +#78934 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#78935 = LINE('',#78936,#78937); +#78936 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#78937 = VECTOR('',#78938,1.); +#78938 = DIRECTION('',(0.,0.,-1.)); +#78939 = ORIENTED_EDGE('',*,*,#78940,.F.); +#78940 = EDGE_CURVE('',#78899,#78933,#78941,.T.); +#78941 = LINE('',#78942,#78943); +#78942 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78943 = VECTOR('',#78944,1.); +#78944 = DIRECTION('',(-1.,0.,0.)); +#78945 = PLANE('',#78946); +#78946 = AXIS2_PLACEMENT_3D('',#78947,#78948,#78949); +#78947 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78948 = DIRECTION('',(0.,1.,0.)); +#78949 = DIRECTION('',(-1.,0.,0.)); +#78950 = ADVANCED_FACE('',(#78951),#78976,.F.); +#78951 = FACE_BOUND('',#78952,.F.); +#78952 = EDGE_LOOP('',(#78953,#78963,#78969,#78970)); +#78953 = ORIENTED_EDGE('',*,*,#78954,.T.); +#78954 = EDGE_CURVE('',#78955,#78957,#78959,.T.); +#78955 = VERTEX_POINT('',#78956); +#78956 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78957 = VERTEX_POINT('',#78958); +#78958 = CARTESIAN_POINT('',(1.81,7.5E-02,-1.41)); +#78959 = LINE('',#78960,#78961); +#78960 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78961 = VECTOR('',#78962,1.); +#78962 = DIRECTION('',(0.,0.,-1.)); +#78963 = ORIENTED_EDGE('',*,*,#78964,.T.); +#78964 = EDGE_CURVE('',#78957,#78901,#78965,.T.); +#78965 = LINE('',#78966,#78967); +#78966 = CARTESIAN_POINT('',(1.81,7.5E-02,-1.41)); +#78967 = VECTOR('',#78968,1.); +#78968 = DIRECTION('',(0.,-1.,0.)); +#78969 = ORIENTED_EDGE('',*,*,#78898,.F.); +#78970 = ORIENTED_EDGE('',*,*,#78971,.F.); +#78971 = EDGE_CURVE('',#78955,#78899,#78972,.T.); +#78972 = LINE('',#78973,#78974); +#78973 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78974 = VECTOR('',#78975,1.); +#78975 = DIRECTION('',(0.,-1.,0.)); +#78976 = PLANE('',#78977); +#78977 = AXIS2_PLACEMENT_3D('',#78978,#78979,#78980); +#78978 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78979 = DIRECTION('',(-1.,-0.,-0.)); +#78980 = DIRECTION('',(0.,-1.,0.)); +#78981 = ADVANCED_FACE('',(#78982),#79000,.T.); +#78982 = FACE_BOUND('',#78983,.T.); +#78983 = EDGE_LOOP('',(#78984,#78992,#78993,#78994)); +#78984 = ORIENTED_EDGE('',*,*,#78985,.F.); +#78985 = EDGE_CURVE('',#78957,#78986,#78988,.T.); +#78986 = VERTEX_POINT('',#78987); +#78987 = CARTESIAN_POINT('',(1.76,7.5E-02,-1.61)); +#78988 = LINE('',#78989,#78990); +#78989 = CARTESIAN_POINT('',(1.979264705882,7.5E-02,-0.732941176471)); +#78990 = VECTOR('',#78991,1.); +#78991 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78992 = ORIENTED_EDGE('',*,*,#78964,.T.); +#78993 = ORIENTED_EDGE('',*,*,#78908,.T.); +#78994 = ORIENTED_EDGE('',*,*,#78995,.F.); +#78995 = EDGE_CURVE('',#78986,#78909,#78996,.T.); +#78996 = LINE('',#78997,#78998); +#78997 = CARTESIAN_POINT('',(1.76,7.5E-02,-1.61)); +#78998 = VECTOR('',#78999,1.); +#78999 = DIRECTION('',(0.,-1.,0.)); +#79000 = PLANE('',#79001); +#79001 = AXIS2_PLACEMENT_3D('',#79002,#79003,#79004); +#79002 = CARTESIAN_POINT('',(1.785,7.5E-02,-1.51)); +#79003 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79004 = DIRECTION('',(0.,-1.,0.)); +#79005 = ADVANCED_FACE('',(#79006),#79024,.T.); +#79006 = FACE_BOUND('',#79007,.F.); +#79007 = EDGE_LOOP('',(#79008,#79009,#79017,#79023)); +#79008 = ORIENTED_EDGE('',*,*,#78940,.T.); +#79009 = ORIENTED_EDGE('',*,*,#79010,.T.); +#79010 = EDGE_CURVE('',#78933,#79011,#79013,.T.); +#79011 = VERTEX_POINT('',#79012); +#79012 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79013 = LINE('',#79014,#79015); +#79014 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#79015 = VECTOR('',#79016,1.); +#79016 = DIRECTION('',(0.,1.,0.)); +#79017 = ORIENTED_EDGE('',*,*,#79018,.T.); +#79018 = EDGE_CURVE('',#79011,#78955,#79019,.T.); +#79019 = LINE('',#79020,#79021); +#79020 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79021 = VECTOR('',#79022,1.); +#79022 = DIRECTION('',(1.,0.,0.)); +#79023 = ORIENTED_EDGE('',*,*,#78971,.T.); +#79024 = PLANE('',#79025); +#79025 = AXIS2_PLACEMENT_3D('',#79026,#79027,#79028); +#79026 = CARTESIAN_POINT('',(1.7,0.,0.19)); +#79027 = DIRECTION('',(0.,0.,1.)); +#79028 = DIRECTION('',(1.,0.,-0.)); +#79029 = ADVANCED_FACE('',(#79030),#79048,.F.); +#79030 = FACE_BOUND('',#79031,.F.); +#79031 = EDGE_LOOP('',(#79032,#79033,#79034,#79042)); +#79032 = ORIENTED_EDGE('',*,*,#78916,.F.); +#79033 = ORIENTED_EDGE('',*,*,#78995,.F.); +#79034 = ORIENTED_EDGE('',*,*,#79035,.F.); +#79035 = EDGE_CURVE('',#79036,#78986,#79038,.T.); +#79036 = VERTEX_POINT('',#79037); +#79037 = CARTESIAN_POINT('',(1.64,7.5E-02,-1.61)); +#79038 = LINE('',#79039,#79040); +#79039 = CARTESIAN_POINT('',(1.59,7.5E-02,-1.61)); +#79040 = VECTOR('',#79041,1.); +#79041 = DIRECTION('',(1.,0.,0.)); +#79042 = ORIENTED_EDGE('',*,*,#79043,.F.); +#79043 = EDGE_CURVE('',#78917,#79036,#79044,.T.); +#79044 = LINE('',#79045,#79046); +#79045 = CARTESIAN_POINT('',(1.64,-7.5E-02,-1.61)); +#79046 = VECTOR('',#79047,1.); +#79047 = DIRECTION('',(0.,1.,0.)); +#79048 = PLANE('',#79049); +#79049 = AXIS2_PLACEMENT_3D('',#79050,#79051,#79052); +#79050 = CARTESIAN_POINT('',(1.7,0.,-1.61)); +#79051 = DIRECTION('',(0.,0.,1.)); +#79052 = DIRECTION('',(1.,0.,-0.)); +#79053 = ADVANCED_FACE('',(#79054),#79072,.F.); +#79054 = FACE_BOUND('',#79055,.F.); +#79055 = EDGE_LOOP('',(#79056,#79057,#79065,#79071)); +#79056 = ORIENTED_EDGE('',*,*,#78932,.T.); +#79057 = ORIENTED_EDGE('',*,*,#79058,.T.); +#79058 = EDGE_CURVE('',#78925,#79059,#79061,.T.); +#79059 = VERTEX_POINT('',#79060); +#79060 = CARTESIAN_POINT('',(1.59,7.5E-02,-1.41)); +#79061 = LINE('',#79062,#79063); +#79062 = CARTESIAN_POINT('',(1.59,-7.5E-02,-1.41)); +#79063 = VECTOR('',#79064,1.); +#79064 = DIRECTION('',(0.,1.,0.)); +#79065 = ORIENTED_EDGE('',*,*,#79066,.F.); +#79066 = EDGE_CURVE('',#79011,#79059,#79067,.T.); +#79067 = LINE('',#79068,#79069); +#79068 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79069 = VECTOR('',#79070,1.); +#79070 = DIRECTION('',(0.,0.,-1.)); +#79071 = ORIENTED_EDGE('',*,*,#79010,.F.); +#79072 = PLANE('',#79073); +#79073 = AXIS2_PLACEMENT_3D('',#79074,#79075,#79076); +#79074 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#79075 = DIRECTION('',(1.,0.,0.)); +#79076 = DIRECTION('',(-0.,1.,0.)); +#79077 = ADVANCED_FACE('',(#79078),#79089,.T.); +#79078 = FACE_BOUND('',#79079,.T.); +#79079 = EDGE_LOOP('',(#79080,#79081,#79082,#79088)); +#79080 = ORIENTED_EDGE('',*,*,#78924,.F.); +#79081 = ORIENTED_EDGE('',*,*,#79058,.T.); +#79082 = ORIENTED_EDGE('',*,*,#79083,.T.); +#79083 = EDGE_CURVE('',#79059,#79036,#79084,.T.); +#79084 = LINE('',#79085,#79086); +#79085 = CARTESIAN_POINT('',(1.414264705882,7.5E-02,-0.707058823529)); +#79086 = VECTOR('',#79087,1.); +#79087 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79088 = ORIENTED_EDGE('',*,*,#79043,.F.); +#79089 = PLANE('',#79090); +#79090 = AXIS2_PLACEMENT_3D('',#79091,#79092,#79093); +#79091 = CARTESIAN_POINT('',(1.615,-7.5E-02,-1.51)); +#79092 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79093 = DIRECTION('',(0.,1.,0.)); +#79094 = ADVANCED_FACE('',(#79095),#79103,.F.); +#79095 = FACE_BOUND('',#79096,.F.); +#79096 = EDGE_LOOP('',(#79097,#79098,#79099,#79100,#79101,#79102)); +#79097 = ORIENTED_EDGE('',*,*,#79066,.T.); +#79098 = ORIENTED_EDGE('',*,*,#79083,.T.); +#79099 = ORIENTED_EDGE('',*,*,#79035,.T.); +#79100 = ORIENTED_EDGE('',*,*,#78985,.F.); +#79101 = ORIENTED_EDGE('',*,*,#78954,.F.); +#79102 = ORIENTED_EDGE('',*,*,#79018,.F.); +#79103 = PLANE('',#79104); +#79104 = AXIS2_PLACEMENT_3D('',#79105,#79106,#79107); +#79105 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79106 = DIRECTION('',(0.,-1.,0.)); +#79107 = DIRECTION('',(1.,0.,0.)); +#79108 = MANIFOLD_SOLID_BREP('',#79109); +#79109 = CLOSED_SHELL('',(#79110,#79166,#79197,#79221,#79245,#79269, + #79293,#79310)); +#79110 = ADVANCED_FACE('',(#79111),#79161,.F.); +#79111 = FACE_BOUND('',#79112,.F.); +#79112 = EDGE_LOOP('',(#79113,#79123,#79131,#79139,#79147,#79155)); +#79113 = ORIENTED_EDGE('',*,*,#79114,.T.); +#79114 = EDGE_CURVE('',#79115,#79117,#79119,.T.); +#79115 = VERTEX_POINT('',#79116); +#79116 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79117 = VERTEX_POINT('',#79118); +#79118 = CARTESIAN_POINT('',(2.66,-1.425,-1.41)); +#79119 = LINE('',#79120,#79121); +#79120 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79121 = VECTOR('',#79122,1.); +#79122 = DIRECTION('',(0.,0.,-1.)); +#79123 = ORIENTED_EDGE('',*,*,#79124,.T.); +#79124 = EDGE_CURVE('',#79117,#79125,#79127,.T.); +#79125 = VERTEX_POINT('',#79126); +#79126 = CARTESIAN_POINT('',(2.61,-1.425,-1.61)); +#79127 = LINE('',#79128,#79129); +#79128 = CARTESIAN_POINT('',(2.835735294118,-1.425,-0.707058823529)); +#79129 = VECTOR('',#79130,1.); +#79130 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79131 = ORIENTED_EDGE('',*,*,#79132,.T.); +#79132 = EDGE_CURVE('',#79125,#79133,#79135,.T.); +#79133 = VERTEX_POINT('',#79134); +#79134 = CARTESIAN_POINT('',(2.49,-1.425,-1.61)); +#79135 = LINE('',#79136,#79137); +#79136 = CARTESIAN_POINT('',(2.66,-1.425,-1.61)); +#79137 = VECTOR('',#79138,1.); +#79138 = DIRECTION('',(-1.,0.,0.)); +#79139 = ORIENTED_EDGE('',*,*,#79140,.F.); +#79140 = EDGE_CURVE('',#79141,#79133,#79143,.T.); +#79141 = VERTEX_POINT('',#79142); +#79142 = CARTESIAN_POINT('',(2.44,-1.425,-1.41)); +#79143 = LINE('',#79144,#79145); +#79144 = CARTESIAN_POINT('',(2.270735294118,-1.425,-0.732941176471)); +#79145 = VECTOR('',#79146,1.); +#79146 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79147 = ORIENTED_EDGE('',*,*,#79148,.F.); +#79148 = EDGE_CURVE('',#79149,#79141,#79151,.T.); +#79149 = VERTEX_POINT('',#79150); +#79150 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79151 = LINE('',#79152,#79153); +#79152 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79153 = VECTOR('',#79154,1.); +#79154 = DIRECTION('',(0.,0.,-1.)); +#79155 = ORIENTED_EDGE('',*,*,#79156,.F.); +#79156 = EDGE_CURVE('',#79115,#79149,#79157,.T.); +#79157 = LINE('',#79158,#79159); +#79158 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79159 = VECTOR('',#79160,1.); +#79160 = DIRECTION('',(-1.,0.,0.)); +#79161 = PLANE('',#79162); +#79162 = AXIS2_PLACEMENT_3D('',#79163,#79164,#79165); +#79163 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79164 = DIRECTION('',(0.,1.,0.)); +#79165 = DIRECTION('',(-1.,0.,0.)); +#79166 = ADVANCED_FACE('',(#79167),#79192,.F.); +#79167 = FACE_BOUND('',#79168,.F.); +#79168 = EDGE_LOOP('',(#79169,#79179,#79185,#79186)); +#79169 = ORIENTED_EDGE('',*,*,#79170,.T.); +#79170 = EDGE_CURVE('',#79171,#79173,#79175,.T.); +#79171 = VERTEX_POINT('',#79172); +#79172 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79173 = VERTEX_POINT('',#79174); +#79174 = CARTESIAN_POINT('',(2.66,-1.275,-1.41)); +#79175 = LINE('',#79176,#79177); +#79176 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79177 = VECTOR('',#79178,1.); +#79178 = DIRECTION('',(0.,0.,-1.)); +#79179 = ORIENTED_EDGE('',*,*,#79180,.T.); +#79180 = EDGE_CURVE('',#79173,#79117,#79181,.T.); +#79181 = LINE('',#79182,#79183); +#79182 = CARTESIAN_POINT('',(2.66,-1.275,-1.41)); +#79183 = VECTOR('',#79184,1.); +#79184 = DIRECTION('',(0.,-1.,0.)); +#79185 = ORIENTED_EDGE('',*,*,#79114,.F.); +#79186 = ORIENTED_EDGE('',*,*,#79187,.F.); +#79187 = EDGE_CURVE('',#79171,#79115,#79188,.T.); +#79188 = LINE('',#79189,#79190); +#79189 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79190 = VECTOR('',#79191,1.); +#79191 = DIRECTION('',(0.,-1.,0.)); +#79192 = PLANE('',#79193); +#79193 = AXIS2_PLACEMENT_3D('',#79194,#79195,#79196); +#79194 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79195 = DIRECTION('',(-1.,-0.,-0.)); +#79196 = DIRECTION('',(0.,-1.,0.)); +#79197 = ADVANCED_FACE('',(#79198),#79216,.T.); +#79198 = FACE_BOUND('',#79199,.T.); +#79199 = EDGE_LOOP('',(#79200,#79208,#79209,#79210)); +#79200 = ORIENTED_EDGE('',*,*,#79201,.F.); +#79201 = EDGE_CURVE('',#79173,#79202,#79204,.T.); +#79202 = VERTEX_POINT('',#79203); +#79203 = CARTESIAN_POINT('',(2.61,-1.275,-1.61)); +#79204 = LINE('',#79205,#79206); +#79205 = CARTESIAN_POINT('',(2.829264705882,-1.275,-0.732941176471)); +#79206 = VECTOR('',#79207,1.); +#79207 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79208 = ORIENTED_EDGE('',*,*,#79180,.T.); +#79209 = ORIENTED_EDGE('',*,*,#79124,.T.); +#79210 = ORIENTED_EDGE('',*,*,#79211,.F.); +#79211 = EDGE_CURVE('',#79202,#79125,#79212,.T.); +#79212 = LINE('',#79213,#79214); +#79213 = CARTESIAN_POINT('',(2.61,-1.275,-1.61)); +#79214 = VECTOR('',#79215,1.); +#79215 = DIRECTION('',(0.,-1.,0.)); +#79216 = PLANE('',#79217); +#79217 = AXIS2_PLACEMENT_3D('',#79218,#79219,#79220); +#79218 = CARTESIAN_POINT('',(2.635,-1.275,-1.51)); +#79219 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79220 = DIRECTION('',(0.,-1.,0.)); +#79221 = ADVANCED_FACE('',(#79222),#79240,.T.); +#79222 = FACE_BOUND('',#79223,.F.); +#79223 = EDGE_LOOP('',(#79224,#79225,#79233,#79239)); +#79224 = ORIENTED_EDGE('',*,*,#79156,.T.); +#79225 = ORIENTED_EDGE('',*,*,#79226,.T.); +#79226 = EDGE_CURVE('',#79149,#79227,#79229,.T.); +#79227 = VERTEX_POINT('',#79228); +#79228 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79229 = LINE('',#79230,#79231); +#79230 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79231 = VECTOR('',#79232,1.); +#79232 = DIRECTION('',(0.,1.,0.)); +#79233 = ORIENTED_EDGE('',*,*,#79234,.T.); +#79234 = EDGE_CURVE('',#79227,#79171,#79235,.T.); +#79235 = LINE('',#79236,#79237); +#79236 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79237 = VECTOR('',#79238,1.); +#79238 = DIRECTION('',(1.,0.,0.)); +#79239 = ORIENTED_EDGE('',*,*,#79187,.T.); +#79240 = PLANE('',#79241); +#79241 = AXIS2_PLACEMENT_3D('',#79242,#79243,#79244); +#79242 = CARTESIAN_POINT('',(2.55,-1.35,0.19)); +#79243 = DIRECTION('',(0.,0.,1.)); +#79244 = DIRECTION('',(1.,0.,-0.)); +#79245 = ADVANCED_FACE('',(#79246),#79264,.F.); +#79246 = FACE_BOUND('',#79247,.F.); +#79247 = EDGE_LOOP('',(#79248,#79249,#79250,#79258)); +#79248 = ORIENTED_EDGE('',*,*,#79132,.F.); +#79249 = ORIENTED_EDGE('',*,*,#79211,.F.); +#79250 = ORIENTED_EDGE('',*,*,#79251,.F.); +#79251 = EDGE_CURVE('',#79252,#79202,#79254,.T.); +#79252 = VERTEX_POINT('',#79253); +#79253 = CARTESIAN_POINT('',(2.49,-1.275,-1.61)); +#79254 = LINE('',#79255,#79256); +#79255 = CARTESIAN_POINT('',(2.44,-1.275,-1.61)); +#79256 = VECTOR('',#79257,1.); +#79257 = DIRECTION('',(1.,0.,0.)); +#79258 = ORIENTED_EDGE('',*,*,#79259,.F.); +#79259 = EDGE_CURVE('',#79133,#79252,#79260,.T.); +#79260 = LINE('',#79261,#79262); +#79261 = CARTESIAN_POINT('',(2.49,-1.425,-1.61)); +#79262 = VECTOR('',#79263,1.); +#79263 = DIRECTION('',(0.,1.,0.)); +#79264 = PLANE('',#79265); +#79265 = AXIS2_PLACEMENT_3D('',#79266,#79267,#79268); +#79266 = CARTESIAN_POINT('',(2.55,-1.35,-1.61)); +#79267 = DIRECTION('',(0.,0.,1.)); +#79268 = DIRECTION('',(1.,0.,-0.)); +#79269 = ADVANCED_FACE('',(#79270),#79288,.F.); +#79270 = FACE_BOUND('',#79271,.F.); +#79271 = EDGE_LOOP('',(#79272,#79273,#79281,#79287)); +#79272 = ORIENTED_EDGE('',*,*,#79148,.T.); +#79273 = ORIENTED_EDGE('',*,*,#79274,.T.); +#79274 = EDGE_CURVE('',#79141,#79275,#79277,.T.); +#79275 = VERTEX_POINT('',#79276); +#79276 = CARTESIAN_POINT('',(2.44,-1.275,-1.41)); +#79277 = LINE('',#79278,#79279); +#79278 = CARTESIAN_POINT('',(2.44,-1.425,-1.41)); +#79279 = VECTOR('',#79280,1.); +#79280 = DIRECTION('',(0.,1.,0.)); +#79281 = ORIENTED_EDGE('',*,*,#79282,.F.); +#79282 = EDGE_CURVE('',#79227,#79275,#79283,.T.); +#79283 = LINE('',#79284,#79285); +#79284 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79285 = VECTOR('',#79286,1.); +#79286 = DIRECTION('',(0.,0.,-1.)); +#79287 = ORIENTED_EDGE('',*,*,#79226,.F.); +#79288 = PLANE('',#79289); +#79289 = AXIS2_PLACEMENT_3D('',#79290,#79291,#79292); +#79290 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79291 = DIRECTION('',(1.,0.,0.)); +#79292 = DIRECTION('',(-0.,1.,0.)); +#79293 = ADVANCED_FACE('',(#79294),#79305,.T.); +#79294 = FACE_BOUND('',#79295,.T.); +#79295 = EDGE_LOOP('',(#79296,#79297,#79298,#79304)); +#79296 = ORIENTED_EDGE('',*,*,#79140,.F.); +#79297 = ORIENTED_EDGE('',*,*,#79274,.T.); +#79298 = ORIENTED_EDGE('',*,*,#79299,.T.); +#79299 = EDGE_CURVE('',#79275,#79252,#79300,.T.); +#79300 = LINE('',#79301,#79302); +#79301 = CARTESIAN_POINT('',(2.264264705882,-1.275,-0.707058823529)); +#79302 = VECTOR('',#79303,1.); +#79303 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79304 = ORIENTED_EDGE('',*,*,#79259,.F.); +#79305 = PLANE('',#79306); +#79306 = AXIS2_PLACEMENT_3D('',#79307,#79308,#79309); +#79307 = CARTESIAN_POINT('',(2.465,-1.425,-1.51)); +#79308 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79309 = DIRECTION('',(0.,1.,0.)); +#79310 = ADVANCED_FACE('',(#79311),#79319,.F.); +#79311 = FACE_BOUND('',#79312,.F.); +#79312 = EDGE_LOOP('',(#79313,#79314,#79315,#79316,#79317,#79318)); +#79313 = ORIENTED_EDGE('',*,*,#79282,.T.); +#79314 = ORIENTED_EDGE('',*,*,#79299,.T.); +#79315 = ORIENTED_EDGE('',*,*,#79251,.T.); +#79316 = ORIENTED_EDGE('',*,*,#79201,.F.); +#79317 = ORIENTED_EDGE('',*,*,#79170,.F.); +#79318 = ORIENTED_EDGE('',*,*,#79234,.F.); +#79319 = PLANE('',#79320); +#79320 = AXIS2_PLACEMENT_3D('',#79321,#79322,#79323); +#79321 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79322 = DIRECTION('',(0.,-1.,0.)); +#79323 = DIRECTION('',(1.,0.,0.)); +#79324 = MANIFOLD_SOLID_BREP('',#79325); +#79325 = CLOSED_SHELL('',(#79326,#79382,#79413,#79437,#79461,#79485, + #79509,#79526)); +#79326 = ADVANCED_FACE('',(#79327),#79377,.F.); +#79327 = FACE_BOUND('',#79328,.F.); +#79328 = EDGE_LOOP('',(#79329,#79339,#79347,#79355,#79363,#79371)); +#79329 = ORIENTED_EDGE('',*,*,#79330,.T.); +#79330 = EDGE_CURVE('',#79331,#79333,#79335,.T.); +#79331 = VERTEX_POINT('',#79332); +#79332 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79333 = VERTEX_POINT('',#79334); +#79334 = CARTESIAN_POINT('',(2.66,-7.5E-02,-1.41)); +#79335 = LINE('',#79336,#79337); +#79336 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79337 = VECTOR('',#79338,1.); +#79338 = DIRECTION('',(0.,0.,-1.)); +#79339 = ORIENTED_EDGE('',*,*,#79340,.T.); +#79340 = EDGE_CURVE('',#79333,#79341,#79343,.T.); +#79341 = VERTEX_POINT('',#79342); +#79342 = CARTESIAN_POINT('',(2.61,-7.5E-02,-1.61)); +#79343 = LINE('',#79344,#79345); +#79344 = CARTESIAN_POINT('',(2.835735294118,-7.5E-02,-0.707058823529)); +#79345 = VECTOR('',#79346,1.); +#79346 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79347 = ORIENTED_EDGE('',*,*,#79348,.T.); +#79348 = EDGE_CURVE('',#79341,#79349,#79351,.T.); +#79349 = VERTEX_POINT('',#79350); +#79350 = CARTESIAN_POINT('',(2.49,-7.5E-02,-1.61)); +#79351 = LINE('',#79352,#79353); +#79352 = CARTESIAN_POINT('',(2.66,-7.5E-02,-1.61)); +#79353 = VECTOR('',#79354,1.); +#79354 = DIRECTION('',(-1.,0.,0.)); +#79355 = ORIENTED_EDGE('',*,*,#79356,.F.); +#79356 = EDGE_CURVE('',#79357,#79349,#79359,.T.); +#79357 = VERTEX_POINT('',#79358); +#79358 = CARTESIAN_POINT('',(2.44,-7.5E-02,-1.41)); +#79359 = LINE('',#79360,#79361); +#79360 = CARTESIAN_POINT('',(2.270735294118,-7.5E-02,-0.732941176471)); +#79361 = VECTOR('',#79362,1.); +#79362 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79363 = ORIENTED_EDGE('',*,*,#79364,.F.); +#79364 = EDGE_CURVE('',#79365,#79357,#79367,.T.); +#79365 = VERTEX_POINT('',#79366); +#79366 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79367 = LINE('',#79368,#79369); +#79368 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79369 = VECTOR('',#79370,1.); +#79370 = DIRECTION('',(0.,0.,-1.)); +#79371 = ORIENTED_EDGE('',*,*,#79372,.F.); +#79372 = EDGE_CURVE('',#79331,#79365,#79373,.T.); +#79373 = LINE('',#79374,#79375); +#79374 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79375 = VECTOR('',#79376,1.); +#79376 = DIRECTION('',(-1.,0.,0.)); +#79377 = PLANE('',#79378); +#79378 = AXIS2_PLACEMENT_3D('',#79379,#79380,#79381); +#79379 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79380 = DIRECTION('',(0.,1.,0.)); +#79381 = DIRECTION('',(-1.,0.,0.)); +#79382 = ADVANCED_FACE('',(#79383),#79408,.F.); +#79383 = FACE_BOUND('',#79384,.F.); +#79384 = EDGE_LOOP('',(#79385,#79395,#79401,#79402)); +#79385 = ORIENTED_EDGE('',*,*,#79386,.T.); +#79386 = EDGE_CURVE('',#79387,#79389,#79391,.T.); +#79387 = VERTEX_POINT('',#79388); +#79388 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79389 = VERTEX_POINT('',#79390); +#79390 = CARTESIAN_POINT('',(2.66,7.5E-02,-1.41)); +#79391 = LINE('',#79392,#79393); +#79392 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79393 = VECTOR('',#79394,1.); +#79394 = DIRECTION('',(0.,0.,-1.)); +#79395 = ORIENTED_EDGE('',*,*,#79396,.T.); +#79396 = EDGE_CURVE('',#79389,#79333,#79397,.T.); +#79397 = LINE('',#79398,#79399); +#79398 = CARTESIAN_POINT('',(2.66,7.5E-02,-1.41)); +#79399 = VECTOR('',#79400,1.); +#79400 = DIRECTION('',(0.,-1.,0.)); +#79401 = ORIENTED_EDGE('',*,*,#79330,.F.); +#79402 = ORIENTED_EDGE('',*,*,#79403,.F.); +#79403 = EDGE_CURVE('',#79387,#79331,#79404,.T.); +#79404 = LINE('',#79405,#79406); +#79405 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79406 = VECTOR('',#79407,1.); +#79407 = DIRECTION('',(0.,-1.,0.)); +#79408 = PLANE('',#79409); +#79409 = AXIS2_PLACEMENT_3D('',#79410,#79411,#79412); +#79410 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79411 = DIRECTION('',(-1.,-0.,-0.)); +#79412 = DIRECTION('',(0.,-1.,0.)); +#79413 = ADVANCED_FACE('',(#79414),#79432,.T.); +#79414 = FACE_BOUND('',#79415,.T.); +#79415 = EDGE_LOOP('',(#79416,#79424,#79425,#79426)); +#79416 = ORIENTED_EDGE('',*,*,#79417,.F.); +#79417 = EDGE_CURVE('',#79389,#79418,#79420,.T.); +#79418 = VERTEX_POINT('',#79419); +#79419 = CARTESIAN_POINT('',(2.61,7.5E-02,-1.61)); +#79420 = LINE('',#79421,#79422); +#79421 = CARTESIAN_POINT('',(2.829264705882,7.5E-02,-0.732941176471)); +#79422 = VECTOR('',#79423,1.); +#79423 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79424 = ORIENTED_EDGE('',*,*,#79396,.T.); +#79425 = ORIENTED_EDGE('',*,*,#79340,.T.); +#79426 = ORIENTED_EDGE('',*,*,#79427,.F.); +#79427 = EDGE_CURVE('',#79418,#79341,#79428,.T.); +#79428 = LINE('',#79429,#79430); +#79429 = CARTESIAN_POINT('',(2.61,7.5E-02,-1.61)); +#79430 = VECTOR('',#79431,1.); +#79431 = DIRECTION('',(0.,-1.,0.)); +#79432 = PLANE('',#79433); +#79433 = AXIS2_PLACEMENT_3D('',#79434,#79435,#79436); +#79434 = CARTESIAN_POINT('',(2.635,7.5E-02,-1.51)); +#79435 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79436 = DIRECTION('',(0.,-1.,0.)); +#79437 = ADVANCED_FACE('',(#79438),#79456,.T.); +#79438 = FACE_BOUND('',#79439,.F.); +#79439 = EDGE_LOOP('',(#79440,#79441,#79449,#79455)); +#79440 = ORIENTED_EDGE('',*,*,#79372,.T.); +#79441 = ORIENTED_EDGE('',*,*,#79442,.T.); +#79442 = EDGE_CURVE('',#79365,#79443,#79445,.T.); +#79443 = VERTEX_POINT('',#79444); +#79444 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79445 = LINE('',#79446,#79447); +#79446 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79447 = VECTOR('',#79448,1.); +#79448 = DIRECTION('',(0.,1.,0.)); +#79449 = ORIENTED_EDGE('',*,*,#79450,.T.); +#79450 = EDGE_CURVE('',#79443,#79387,#79451,.T.); +#79451 = LINE('',#79452,#79453); +#79452 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79453 = VECTOR('',#79454,1.); +#79454 = DIRECTION('',(1.,0.,0.)); +#79455 = ORIENTED_EDGE('',*,*,#79403,.T.); +#79456 = PLANE('',#79457); +#79457 = AXIS2_PLACEMENT_3D('',#79458,#79459,#79460); +#79458 = CARTESIAN_POINT('',(2.55,0.,0.19)); +#79459 = DIRECTION('',(0.,0.,1.)); +#79460 = DIRECTION('',(1.,0.,-0.)); +#79461 = ADVANCED_FACE('',(#79462),#79480,.F.); +#79462 = FACE_BOUND('',#79463,.F.); +#79463 = EDGE_LOOP('',(#79464,#79465,#79466,#79474)); +#79464 = ORIENTED_EDGE('',*,*,#79348,.F.); +#79465 = ORIENTED_EDGE('',*,*,#79427,.F.); +#79466 = ORIENTED_EDGE('',*,*,#79467,.F.); +#79467 = EDGE_CURVE('',#79468,#79418,#79470,.T.); +#79468 = VERTEX_POINT('',#79469); +#79469 = CARTESIAN_POINT('',(2.49,7.5E-02,-1.61)); +#79470 = LINE('',#79471,#79472); +#79471 = CARTESIAN_POINT('',(2.44,7.5E-02,-1.61)); +#79472 = VECTOR('',#79473,1.); +#79473 = DIRECTION('',(1.,0.,0.)); +#79474 = ORIENTED_EDGE('',*,*,#79475,.F.); +#79475 = EDGE_CURVE('',#79349,#79468,#79476,.T.); +#79476 = LINE('',#79477,#79478); +#79477 = CARTESIAN_POINT('',(2.49,-7.5E-02,-1.61)); +#79478 = VECTOR('',#79479,1.); +#79479 = DIRECTION('',(0.,1.,0.)); +#79480 = PLANE('',#79481); +#79481 = AXIS2_PLACEMENT_3D('',#79482,#79483,#79484); +#79482 = CARTESIAN_POINT('',(2.55,0.,-1.61)); +#79483 = DIRECTION('',(0.,0.,1.)); +#79484 = DIRECTION('',(1.,0.,-0.)); +#79485 = ADVANCED_FACE('',(#79486),#79504,.F.); +#79486 = FACE_BOUND('',#79487,.F.); +#79487 = EDGE_LOOP('',(#79488,#79489,#79497,#79503)); +#79488 = ORIENTED_EDGE('',*,*,#79364,.T.); +#79489 = ORIENTED_EDGE('',*,*,#79490,.T.); +#79490 = EDGE_CURVE('',#79357,#79491,#79493,.T.); +#79491 = VERTEX_POINT('',#79492); +#79492 = CARTESIAN_POINT('',(2.44,7.5E-02,-1.41)); +#79493 = LINE('',#79494,#79495); +#79494 = CARTESIAN_POINT('',(2.44,-7.5E-02,-1.41)); +#79495 = VECTOR('',#79496,1.); +#79496 = DIRECTION('',(0.,1.,0.)); +#79497 = ORIENTED_EDGE('',*,*,#79498,.F.); +#79498 = EDGE_CURVE('',#79443,#79491,#79499,.T.); +#79499 = LINE('',#79500,#79501); +#79500 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79501 = VECTOR('',#79502,1.); +#79502 = DIRECTION('',(0.,0.,-1.)); +#79503 = ORIENTED_EDGE('',*,*,#79442,.F.); +#79504 = PLANE('',#79505); +#79505 = AXIS2_PLACEMENT_3D('',#79506,#79507,#79508); +#79506 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79507 = DIRECTION('',(1.,0.,0.)); +#79508 = DIRECTION('',(-0.,1.,0.)); +#79509 = ADVANCED_FACE('',(#79510),#79521,.T.); +#79510 = FACE_BOUND('',#79511,.T.); +#79511 = EDGE_LOOP('',(#79512,#79513,#79514,#79520)); +#79512 = ORIENTED_EDGE('',*,*,#79356,.F.); +#79513 = ORIENTED_EDGE('',*,*,#79490,.T.); +#79514 = ORIENTED_EDGE('',*,*,#79515,.T.); +#79515 = EDGE_CURVE('',#79491,#79468,#79516,.T.); +#79516 = LINE('',#79517,#79518); +#79517 = CARTESIAN_POINT('',(2.264264705882,7.5E-02,-0.707058823529)); +#79518 = VECTOR('',#79519,1.); +#79519 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79520 = ORIENTED_EDGE('',*,*,#79475,.F.); +#79521 = PLANE('',#79522); +#79522 = AXIS2_PLACEMENT_3D('',#79523,#79524,#79525); +#79523 = CARTESIAN_POINT('',(2.465,-7.5E-02,-1.51)); +#79524 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79525 = DIRECTION('',(0.,1.,0.)); +#79526 = ADVANCED_FACE('',(#79527),#79535,.F.); +#79527 = FACE_BOUND('',#79528,.F.); +#79528 = EDGE_LOOP('',(#79529,#79530,#79531,#79532,#79533,#79534)); +#79529 = ORIENTED_EDGE('',*,*,#79498,.T.); +#79530 = ORIENTED_EDGE('',*,*,#79515,.T.); +#79531 = ORIENTED_EDGE('',*,*,#79467,.T.); +#79532 = ORIENTED_EDGE('',*,*,#79417,.F.); +#79533 = ORIENTED_EDGE('',*,*,#79386,.F.); +#79534 = ORIENTED_EDGE('',*,*,#79450,.F.); +#79535 = PLANE('',#79536); +#79536 = AXIS2_PLACEMENT_3D('',#79537,#79538,#79539); +#79537 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79538 = DIRECTION('',(0.,-1.,0.)); +#79539 = DIRECTION('',(1.,0.,0.)); +#79540 = MANIFOLD_SOLID_BREP('',#79541); +#79541 = CLOSED_SHELL('',(#79542,#79598,#79629,#79653,#79677,#79701, + #79725,#79742)); +#79542 = ADVANCED_FACE('',(#79543),#79593,.F.); +#79543 = FACE_BOUND('',#79544,.F.); +#79544 = EDGE_LOOP('',(#79545,#79555,#79563,#79571,#79579,#79587)); +#79545 = ORIENTED_EDGE('',*,*,#79546,.T.); +#79546 = EDGE_CURVE('',#79547,#79549,#79551,.T.); +#79547 = VERTEX_POINT('',#79548); +#79548 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79549 = VERTEX_POINT('',#79550); +#79550 = CARTESIAN_POINT('',(3.51,-1.425,-1.41)); +#79551 = LINE('',#79552,#79553); +#79552 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79553 = VECTOR('',#79554,1.); +#79554 = DIRECTION('',(0.,0.,-1.)); +#79555 = ORIENTED_EDGE('',*,*,#79556,.T.); +#79556 = EDGE_CURVE('',#79549,#79557,#79559,.T.); +#79557 = VERTEX_POINT('',#79558); +#79558 = CARTESIAN_POINT('',(3.46,-1.425,-1.61)); +#79559 = LINE('',#79560,#79561); +#79560 = CARTESIAN_POINT('',(3.685735294118,-1.425,-0.707058823529)); +#79561 = VECTOR('',#79562,1.); +#79562 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79563 = ORIENTED_EDGE('',*,*,#79564,.T.); +#79564 = EDGE_CURVE('',#79557,#79565,#79567,.T.); +#79565 = VERTEX_POINT('',#79566); +#79566 = CARTESIAN_POINT('',(3.34,-1.425,-1.61)); +#79567 = LINE('',#79568,#79569); +#79568 = CARTESIAN_POINT('',(3.51,-1.425,-1.61)); +#79569 = VECTOR('',#79570,1.); +#79570 = DIRECTION('',(-1.,0.,0.)); +#79571 = ORIENTED_EDGE('',*,*,#79572,.F.); +#79572 = EDGE_CURVE('',#79573,#79565,#79575,.T.); +#79573 = VERTEX_POINT('',#79574); +#79574 = CARTESIAN_POINT('',(3.29,-1.425,-1.41)); +#79575 = LINE('',#79576,#79577); +#79576 = CARTESIAN_POINT('',(3.120735294118,-1.425,-0.732941176471)); +#79577 = VECTOR('',#79578,1.); +#79578 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79579 = ORIENTED_EDGE('',*,*,#79580,.F.); +#79580 = EDGE_CURVE('',#79581,#79573,#79583,.T.); +#79581 = VERTEX_POINT('',#79582); +#79582 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79583 = LINE('',#79584,#79585); +#79584 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79585 = VECTOR('',#79586,1.); +#79586 = DIRECTION('',(0.,0.,-1.)); +#79587 = ORIENTED_EDGE('',*,*,#79588,.F.); +#79588 = EDGE_CURVE('',#79547,#79581,#79589,.T.); +#79589 = LINE('',#79590,#79591); +#79590 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79591 = VECTOR('',#79592,1.); +#79592 = DIRECTION('',(-1.,0.,0.)); +#79593 = PLANE('',#79594); +#79594 = AXIS2_PLACEMENT_3D('',#79595,#79596,#79597); +#79595 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79596 = DIRECTION('',(0.,1.,0.)); +#79597 = DIRECTION('',(-1.,0.,0.)); +#79598 = ADVANCED_FACE('',(#79599),#79624,.F.); +#79599 = FACE_BOUND('',#79600,.F.); +#79600 = EDGE_LOOP('',(#79601,#79611,#79617,#79618)); +#79601 = ORIENTED_EDGE('',*,*,#79602,.T.); +#79602 = EDGE_CURVE('',#79603,#79605,#79607,.T.); +#79603 = VERTEX_POINT('',#79604); +#79604 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79605 = VERTEX_POINT('',#79606); +#79606 = CARTESIAN_POINT('',(3.51,-1.275,-1.41)); +#79607 = LINE('',#79608,#79609); +#79608 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79609 = VECTOR('',#79610,1.); +#79610 = DIRECTION('',(0.,0.,-1.)); +#79611 = ORIENTED_EDGE('',*,*,#79612,.T.); +#79612 = EDGE_CURVE('',#79605,#79549,#79613,.T.); +#79613 = LINE('',#79614,#79615); +#79614 = CARTESIAN_POINT('',(3.51,-1.275,-1.41)); +#79615 = VECTOR('',#79616,1.); +#79616 = DIRECTION('',(0.,-1.,0.)); +#79617 = ORIENTED_EDGE('',*,*,#79546,.F.); +#79618 = ORIENTED_EDGE('',*,*,#79619,.F.); +#79619 = EDGE_CURVE('',#79603,#79547,#79620,.T.); +#79620 = LINE('',#79621,#79622); +#79621 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79622 = VECTOR('',#79623,1.); +#79623 = DIRECTION('',(0.,-1.,0.)); +#79624 = PLANE('',#79625); +#79625 = AXIS2_PLACEMENT_3D('',#79626,#79627,#79628); +#79626 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79627 = DIRECTION('',(-1.,-0.,-0.)); +#79628 = DIRECTION('',(0.,-1.,0.)); +#79629 = ADVANCED_FACE('',(#79630),#79648,.T.); +#79630 = FACE_BOUND('',#79631,.T.); +#79631 = EDGE_LOOP('',(#79632,#79640,#79641,#79642)); +#79632 = ORIENTED_EDGE('',*,*,#79633,.F.); +#79633 = EDGE_CURVE('',#79605,#79634,#79636,.T.); +#79634 = VERTEX_POINT('',#79635); +#79635 = CARTESIAN_POINT('',(3.46,-1.275,-1.61)); +#79636 = LINE('',#79637,#79638); +#79637 = CARTESIAN_POINT('',(3.679264705882,-1.275,-0.732941176471)); +#79638 = VECTOR('',#79639,1.); +#79639 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79640 = ORIENTED_EDGE('',*,*,#79612,.T.); +#79641 = ORIENTED_EDGE('',*,*,#79556,.T.); +#79642 = ORIENTED_EDGE('',*,*,#79643,.F.); +#79643 = EDGE_CURVE('',#79634,#79557,#79644,.T.); +#79644 = LINE('',#79645,#79646); +#79645 = CARTESIAN_POINT('',(3.46,-1.275,-1.61)); +#79646 = VECTOR('',#79647,1.); +#79647 = DIRECTION('',(0.,-1.,0.)); +#79648 = PLANE('',#79649); +#79649 = AXIS2_PLACEMENT_3D('',#79650,#79651,#79652); +#79650 = CARTESIAN_POINT('',(3.485,-1.275,-1.51)); +#79651 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79652 = DIRECTION('',(0.,-1.,0.)); +#79653 = ADVANCED_FACE('',(#79654),#79672,.T.); +#79654 = FACE_BOUND('',#79655,.F.); +#79655 = EDGE_LOOP('',(#79656,#79657,#79665,#79671)); +#79656 = ORIENTED_EDGE('',*,*,#79588,.T.); +#79657 = ORIENTED_EDGE('',*,*,#79658,.T.); +#79658 = EDGE_CURVE('',#79581,#79659,#79661,.T.); +#79659 = VERTEX_POINT('',#79660); +#79660 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79661 = LINE('',#79662,#79663); +#79662 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79663 = VECTOR('',#79664,1.); +#79664 = DIRECTION('',(0.,1.,0.)); +#79665 = ORIENTED_EDGE('',*,*,#79666,.T.); +#79666 = EDGE_CURVE('',#79659,#79603,#79667,.T.); +#79667 = LINE('',#79668,#79669); +#79668 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79669 = VECTOR('',#79670,1.); +#79670 = DIRECTION('',(1.,0.,0.)); +#79671 = ORIENTED_EDGE('',*,*,#79619,.T.); +#79672 = PLANE('',#79673); +#79673 = AXIS2_PLACEMENT_3D('',#79674,#79675,#79676); +#79674 = CARTESIAN_POINT('',(3.4,-1.35,0.19)); +#79675 = DIRECTION('',(0.,0.,1.)); +#79676 = DIRECTION('',(1.,0.,-0.)); +#79677 = ADVANCED_FACE('',(#79678),#79696,.F.); +#79678 = FACE_BOUND('',#79679,.F.); +#79679 = EDGE_LOOP('',(#79680,#79681,#79682,#79690)); +#79680 = ORIENTED_EDGE('',*,*,#79564,.F.); +#79681 = ORIENTED_EDGE('',*,*,#79643,.F.); +#79682 = ORIENTED_EDGE('',*,*,#79683,.F.); +#79683 = EDGE_CURVE('',#79684,#79634,#79686,.T.); +#79684 = VERTEX_POINT('',#79685); +#79685 = CARTESIAN_POINT('',(3.34,-1.275,-1.61)); +#79686 = LINE('',#79687,#79688); +#79687 = CARTESIAN_POINT('',(3.29,-1.275,-1.61)); +#79688 = VECTOR('',#79689,1.); +#79689 = DIRECTION('',(1.,0.,0.)); +#79690 = ORIENTED_EDGE('',*,*,#79691,.F.); +#79691 = EDGE_CURVE('',#79565,#79684,#79692,.T.); +#79692 = LINE('',#79693,#79694); +#79693 = CARTESIAN_POINT('',(3.34,-1.425,-1.61)); +#79694 = VECTOR('',#79695,1.); +#79695 = DIRECTION('',(0.,1.,0.)); +#79696 = PLANE('',#79697); +#79697 = AXIS2_PLACEMENT_3D('',#79698,#79699,#79700); +#79698 = CARTESIAN_POINT('',(3.4,-1.35,-1.61)); +#79699 = DIRECTION('',(0.,0.,1.)); +#79700 = DIRECTION('',(1.,0.,-0.)); +#79701 = ADVANCED_FACE('',(#79702),#79720,.F.); +#79702 = FACE_BOUND('',#79703,.F.); +#79703 = EDGE_LOOP('',(#79704,#79705,#79713,#79719)); +#79704 = ORIENTED_EDGE('',*,*,#79580,.T.); +#79705 = ORIENTED_EDGE('',*,*,#79706,.T.); +#79706 = EDGE_CURVE('',#79573,#79707,#79709,.T.); +#79707 = VERTEX_POINT('',#79708); +#79708 = CARTESIAN_POINT('',(3.29,-1.275,-1.41)); +#79709 = LINE('',#79710,#79711); +#79710 = CARTESIAN_POINT('',(3.29,-1.425,-1.41)); +#79711 = VECTOR('',#79712,1.); +#79712 = DIRECTION('',(0.,1.,0.)); +#79713 = ORIENTED_EDGE('',*,*,#79714,.F.); +#79714 = EDGE_CURVE('',#79659,#79707,#79715,.T.); +#79715 = LINE('',#79716,#79717); +#79716 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79717 = VECTOR('',#79718,1.); +#79718 = DIRECTION('',(0.,0.,-1.)); +#79719 = ORIENTED_EDGE('',*,*,#79658,.F.); +#79720 = PLANE('',#79721); +#79721 = AXIS2_PLACEMENT_3D('',#79722,#79723,#79724); +#79722 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79723 = DIRECTION('',(1.,0.,0.)); +#79724 = DIRECTION('',(-0.,1.,0.)); +#79725 = ADVANCED_FACE('',(#79726),#79737,.T.); +#79726 = FACE_BOUND('',#79727,.T.); +#79727 = EDGE_LOOP('',(#79728,#79729,#79730,#79736)); +#79728 = ORIENTED_EDGE('',*,*,#79572,.F.); +#79729 = ORIENTED_EDGE('',*,*,#79706,.T.); +#79730 = ORIENTED_EDGE('',*,*,#79731,.T.); +#79731 = EDGE_CURVE('',#79707,#79684,#79732,.T.); +#79732 = LINE('',#79733,#79734); +#79733 = CARTESIAN_POINT('',(3.114264705882,-1.275,-0.707058823529)); +#79734 = VECTOR('',#79735,1.); +#79735 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79736 = ORIENTED_EDGE('',*,*,#79691,.F.); +#79737 = PLANE('',#79738); +#79738 = AXIS2_PLACEMENT_3D('',#79739,#79740,#79741); +#79739 = CARTESIAN_POINT('',(3.315,-1.425,-1.51)); +#79740 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79741 = DIRECTION('',(0.,1.,0.)); +#79742 = ADVANCED_FACE('',(#79743),#79751,.F.); +#79743 = FACE_BOUND('',#79744,.F.); +#79744 = EDGE_LOOP('',(#79745,#79746,#79747,#79748,#79749,#79750)); +#79745 = ORIENTED_EDGE('',*,*,#79714,.T.); +#79746 = ORIENTED_EDGE('',*,*,#79731,.T.); +#79747 = ORIENTED_EDGE('',*,*,#79683,.T.); +#79748 = ORIENTED_EDGE('',*,*,#79633,.F.); +#79749 = ORIENTED_EDGE('',*,*,#79602,.F.); +#79750 = ORIENTED_EDGE('',*,*,#79666,.F.); +#79751 = PLANE('',#79752); +#79752 = AXIS2_PLACEMENT_3D('',#79753,#79754,#79755); +#79753 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79754 = DIRECTION('',(0.,-1.,0.)); +#79755 = DIRECTION('',(1.,0.,0.)); +#79756 = MANIFOLD_SOLID_BREP('',#79757); +#79757 = CLOSED_SHELL('',(#79758,#79814,#79845,#79869,#79893,#79917, + #79941,#79958)); +#79758 = ADVANCED_FACE('',(#79759),#79809,.F.); +#79759 = FACE_BOUND('',#79760,.F.); +#79760 = EDGE_LOOP('',(#79761,#79771,#79779,#79787,#79795,#79803)); +#79761 = ORIENTED_EDGE('',*,*,#79762,.T.); +#79762 = EDGE_CURVE('',#79763,#79765,#79767,.T.); +#79763 = VERTEX_POINT('',#79764); +#79764 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79765 = VERTEX_POINT('',#79766); +#79766 = CARTESIAN_POINT('',(3.51,-7.5E-02,-1.41)); +#79767 = LINE('',#79768,#79769); +#79768 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79769 = VECTOR('',#79770,1.); +#79770 = DIRECTION('',(0.,0.,-1.)); +#79771 = ORIENTED_EDGE('',*,*,#79772,.T.); +#79772 = EDGE_CURVE('',#79765,#79773,#79775,.T.); +#79773 = VERTEX_POINT('',#79774); +#79774 = CARTESIAN_POINT('',(3.46,-7.5E-02,-1.61)); +#79775 = LINE('',#79776,#79777); +#79776 = CARTESIAN_POINT('',(3.685735294118,-7.5E-02,-0.707058823529)); +#79777 = VECTOR('',#79778,1.); +#79778 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79779 = ORIENTED_EDGE('',*,*,#79780,.T.); +#79780 = EDGE_CURVE('',#79773,#79781,#79783,.T.); +#79781 = VERTEX_POINT('',#79782); +#79782 = CARTESIAN_POINT('',(3.34,-7.5E-02,-1.61)); +#79783 = LINE('',#79784,#79785); +#79784 = CARTESIAN_POINT('',(3.51,-7.5E-02,-1.61)); +#79785 = VECTOR('',#79786,1.); +#79786 = DIRECTION('',(-1.,0.,0.)); +#79787 = ORIENTED_EDGE('',*,*,#79788,.F.); +#79788 = EDGE_CURVE('',#79789,#79781,#79791,.T.); +#79789 = VERTEX_POINT('',#79790); +#79790 = CARTESIAN_POINT('',(3.29,-7.5E-02,-1.41)); +#79791 = LINE('',#79792,#79793); +#79792 = CARTESIAN_POINT('',(3.120735294118,-7.5E-02,-0.732941176471)); +#79793 = VECTOR('',#79794,1.); +#79794 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79795 = ORIENTED_EDGE('',*,*,#79796,.F.); +#79796 = EDGE_CURVE('',#79797,#79789,#79799,.T.); +#79797 = VERTEX_POINT('',#79798); +#79798 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79799 = LINE('',#79800,#79801); +#79800 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79801 = VECTOR('',#79802,1.); +#79802 = DIRECTION('',(0.,0.,-1.)); +#79803 = ORIENTED_EDGE('',*,*,#79804,.F.); +#79804 = EDGE_CURVE('',#79763,#79797,#79805,.T.); +#79805 = LINE('',#79806,#79807); +#79806 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79807 = VECTOR('',#79808,1.); +#79808 = DIRECTION('',(-1.,0.,0.)); +#79809 = PLANE('',#79810); +#79810 = AXIS2_PLACEMENT_3D('',#79811,#79812,#79813); +#79811 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79812 = DIRECTION('',(0.,1.,0.)); +#79813 = DIRECTION('',(-1.,0.,0.)); +#79814 = ADVANCED_FACE('',(#79815),#79840,.F.); +#79815 = FACE_BOUND('',#79816,.F.); +#79816 = EDGE_LOOP('',(#79817,#79827,#79833,#79834)); +#79817 = ORIENTED_EDGE('',*,*,#79818,.T.); +#79818 = EDGE_CURVE('',#79819,#79821,#79823,.T.); +#79819 = VERTEX_POINT('',#79820); +#79820 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79821 = VERTEX_POINT('',#79822); +#79822 = CARTESIAN_POINT('',(3.51,7.5E-02,-1.41)); +#79823 = LINE('',#79824,#79825); +#79824 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79825 = VECTOR('',#79826,1.); +#79826 = DIRECTION('',(0.,0.,-1.)); +#79827 = ORIENTED_EDGE('',*,*,#79828,.T.); +#79828 = EDGE_CURVE('',#79821,#79765,#79829,.T.); +#79829 = LINE('',#79830,#79831); +#79830 = CARTESIAN_POINT('',(3.51,7.5E-02,-1.41)); +#79831 = VECTOR('',#79832,1.); +#79832 = DIRECTION('',(0.,-1.,0.)); +#79833 = ORIENTED_EDGE('',*,*,#79762,.F.); +#79834 = ORIENTED_EDGE('',*,*,#79835,.F.); +#79835 = EDGE_CURVE('',#79819,#79763,#79836,.T.); +#79836 = LINE('',#79837,#79838); +#79837 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79838 = VECTOR('',#79839,1.); +#79839 = DIRECTION('',(0.,-1.,0.)); +#79840 = PLANE('',#79841); +#79841 = AXIS2_PLACEMENT_3D('',#79842,#79843,#79844); +#79842 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79843 = DIRECTION('',(-1.,-0.,-0.)); +#79844 = DIRECTION('',(0.,-1.,0.)); +#79845 = ADVANCED_FACE('',(#79846),#79864,.T.); +#79846 = FACE_BOUND('',#79847,.T.); +#79847 = EDGE_LOOP('',(#79848,#79856,#79857,#79858)); +#79848 = ORIENTED_EDGE('',*,*,#79849,.F.); +#79849 = EDGE_CURVE('',#79821,#79850,#79852,.T.); +#79850 = VERTEX_POINT('',#79851); +#79851 = CARTESIAN_POINT('',(3.46,7.5E-02,-1.61)); +#79852 = LINE('',#79853,#79854); +#79853 = CARTESIAN_POINT('',(3.679264705882,7.5E-02,-0.732941176471)); +#79854 = VECTOR('',#79855,1.); +#79855 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79856 = ORIENTED_EDGE('',*,*,#79828,.T.); +#79857 = ORIENTED_EDGE('',*,*,#79772,.T.); +#79858 = ORIENTED_EDGE('',*,*,#79859,.F.); +#79859 = EDGE_CURVE('',#79850,#79773,#79860,.T.); +#79860 = LINE('',#79861,#79862); +#79861 = CARTESIAN_POINT('',(3.46,7.5E-02,-1.61)); +#79862 = VECTOR('',#79863,1.); +#79863 = DIRECTION('',(0.,-1.,0.)); +#79864 = PLANE('',#79865); +#79865 = AXIS2_PLACEMENT_3D('',#79866,#79867,#79868); +#79866 = CARTESIAN_POINT('',(3.485,7.5E-02,-1.51)); +#79867 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79868 = DIRECTION('',(0.,-1.,0.)); +#79869 = ADVANCED_FACE('',(#79870),#79888,.T.); +#79870 = FACE_BOUND('',#79871,.F.); +#79871 = EDGE_LOOP('',(#79872,#79873,#79881,#79887)); +#79872 = ORIENTED_EDGE('',*,*,#79804,.T.); +#79873 = ORIENTED_EDGE('',*,*,#79874,.T.); +#79874 = EDGE_CURVE('',#79797,#79875,#79877,.T.); +#79875 = VERTEX_POINT('',#79876); +#79876 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79877 = LINE('',#79878,#79879); +#79878 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79879 = VECTOR('',#79880,1.); +#79880 = DIRECTION('',(0.,1.,0.)); +#79881 = ORIENTED_EDGE('',*,*,#79882,.T.); +#79882 = EDGE_CURVE('',#79875,#79819,#79883,.T.); +#79883 = LINE('',#79884,#79885); +#79884 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79885 = VECTOR('',#79886,1.); +#79886 = DIRECTION('',(1.,0.,0.)); +#79887 = ORIENTED_EDGE('',*,*,#79835,.T.); +#79888 = PLANE('',#79889); +#79889 = AXIS2_PLACEMENT_3D('',#79890,#79891,#79892); +#79890 = CARTESIAN_POINT('',(3.4,0.,0.19)); +#79891 = DIRECTION('',(0.,0.,1.)); +#79892 = DIRECTION('',(1.,0.,-0.)); +#79893 = ADVANCED_FACE('',(#79894),#79912,.F.); +#79894 = FACE_BOUND('',#79895,.F.); +#79895 = EDGE_LOOP('',(#79896,#79897,#79898,#79906)); +#79896 = ORIENTED_EDGE('',*,*,#79780,.F.); +#79897 = ORIENTED_EDGE('',*,*,#79859,.F.); +#79898 = ORIENTED_EDGE('',*,*,#79899,.F.); +#79899 = EDGE_CURVE('',#79900,#79850,#79902,.T.); +#79900 = VERTEX_POINT('',#79901); +#79901 = CARTESIAN_POINT('',(3.34,7.5E-02,-1.61)); +#79902 = LINE('',#79903,#79904); +#79903 = CARTESIAN_POINT('',(3.29,7.5E-02,-1.61)); +#79904 = VECTOR('',#79905,1.); +#79905 = DIRECTION('',(1.,0.,0.)); +#79906 = ORIENTED_EDGE('',*,*,#79907,.F.); +#79907 = EDGE_CURVE('',#79781,#79900,#79908,.T.); +#79908 = LINE('',#79909,#79910); +#79909 = CARTESIAN_POINT('',(3.34,-7.5E-02,-1.61)); +#79910 = VECTOR('',#79911,1.); +#79911 = DIRECTION('',(0.,1.,0.)); +#79912 = PLANE('',#79913); +#79913 = AXIS2_PLACEMENT_3D('',#79914,#79915,#79916); +#79914 = CARTESIAN_POINT('',(3.4,0.,-1.61)); +#79915 = DIRECTION('',(0.,0.,1.)); +#79916 = DIRECTION('',(1.,0.,-0.)); +#79917 = ADVANCED_FACE('',(#79918),#79936,.F.); +#79918 = FACE_BOUND('',#79919,.F.); +#79919 = EDGE_LOOP('',(#79920,#79921,#79929,#79935)); +#79920 = ORIENTED_EDGE('',*,*,#79796,.T.); +#79921 = ORIENTED_EDGE('',*,*,#79922,.T.); +#79922 = EDGE_CURVE('',#79789,#79923,#79925,.T.); +#79923 = VERTEX_POINT('',#79924); +#79924 = CARTESIAN_POINT('',(3.29,7.5E-02,-1.41)); +#79925 = LINE('',#79926,#79927); +#79926 = CARTESIAN_POINT('',(3.29,-7.5E-02,-1.41)); +#79927 = VECTOR('',#79928,1.); +#79928 = DIRECTION('',(0.,1.,0.)); +#79929 = ORIENTED_EDGE('',*,*,#79930,.F.); +#79930 = EDGE_CURVE('',#79875,#79923,#79931,.T.); +#79931 = LINE('',#79932,#79933); +#79932 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79933 = VECTOR('',#79934,1.); +#79934 = DIRECTION('',(0.,0.,-1.)); +#79935 = ORIENTED_EDGE('',*,*,#79874,.F.); +#79936 = PLANE('',#79937); +#79937 = AXIS2_PLACEMENT_3D('',#79938,#79939,#79940); +#79938 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79939 = DIRECTION('',(1.,0.,0.)); +#79940 = DIRECTION('',(-0.,1.,0.)); +#79941 = ADVANCED_FACE('',(#79942),#79953,.T.); +#79942 = FACE_BOUND('',#79943,.T.); +#79943 = EDGE_LOOP('',(#79944,#79945,#79946,#79952)); +#79944 = ORIENTED_EDGE('',*,*,#79788,.F.); +#79945 = ORIENTED_EDGE('',*,*,#79922,.T.); +#79946 = ORIENTED_EDGE('',*,*,#79947,.T.); +#79947 = EDGE_CURVE('',#79923,#79900,#79948,.T.); +#79948 = LINE('',#79949,#79950); +#79949 = CARTESIAN_POINT('',(3.114264705882,7.5E-02,-0.707058823529)); +#79950 = VECTOR('',#79951,1.); +#79951 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79952 = ORIENTED_EDGE('',*,*,#79907,.F.); +#79953 = PLANE('',#79954); +#79954 = AXIS2_PLACEMENT_3D('',#79955,#79956,#79957); +#79955 = CARTESIAN_POINT('',(3.315,-7.5E-02,-1.51)); +#79956 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79957 = DIRECTION('',(0.,1.,0.)); +#79958 = ADVANCED_FACE('',(#79959),#79967,.F.); +#79959 = FACE_BOUND('',#79960,.F.); +#79960 = EDGE_LOOP('',(#79961,#79962,#79963,#79964,#79965,#79966)); +#79961 = ORIENTED_EDGE('',*,*,#79930,.T.); +#79962 = ORIENTED_EDGE('',*,*,#79947,.T.); +#79963 = ORIENTED_EDGE('',*,*,#79899,.T.); +#79964 = ORIENTED_EDGE('',*,*,#79849,.F.); +#79965 = ORIENTED_EDGE('',*,*,#79818,.F.); +#79966 = ORIENTED_EDGE('',*,*,#79882,.F.); +#79967 = PLANE('',#79968); +#79968 = AXIS2_PLACEMENT_3D('',#79969,#79970,#79971); +#79969 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79970 = DIRECTION('',(0.,-1.,0.)); +#79971 = DIRECTION('',(1.,0.,0.)); +#79972 = MANIFOLD_SOLID_BREP('',#79973); +#79973 = CLOSED_SHELL('',(#79974,#80030,#80061,#80085,#80109,#80133, + #80157,#80174)); +#79974 = ADVANCED_FACE('',(#79975),#80025,.F.); +#79975 = FACE_BOUND('',#79976,.F.); +#79976 = EDGE_LOOP('',(#79977,#79987,#79995,#80003,#80011,#80019)); +#79977 = ORIENTED_EDGE('',*,*,#79978,.T.); +#79978 = EDGE_CURVE('',#79979,#79981,#79983,.T.); +#79979 = VERTEX_POINT('',#79980); +#79980 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#79981 = VERTEX_POINT('',#79982); +#79982 = CARTESIAN_POINT('',(4.36,-1.425,-1.41)); +#79983 = LINE('',#79984,#79985); +#79984 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#79985 = VECTOR('',#79986,1.); +#79986 = DIRECTION('',(0.,0.,-1.)); +#79987 = ORIENTED_EDGE('',*,*,#79988,.T.); +#79988 = EDGE_CURVE('',#79981,#79989,#79991,.T.); +#79989 = VERTEX_POINT('',#79990); +#79990 = CARTESIAN_POINT('',(4.31,-1.425,-1.61)); +#79991 = LINE('',#79992,#79993); +#79992 = CARTESIAN_POINT('',(4.535735294118,-1.425,-0.707058823529)); +#79993 = VECTOR('',#79994,1.); +#79994 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79995 = ORIENTED_EDGE('',*,*,#79996,.T.); +#79996 = EDGE_CURVE('',#79989,#79997,#79999,.T.); +#79997 = VERTEX_POINT('',#79998); +#79998 = CARTESIAN_POINT('',(4.19,-1.425,-1.61)); +#79999 = LINE('',#80000,#80001); +#80000 = CARTESIAN_POINT('',(4.36,-1.425,-1.61)); +#80001 = VECTOR('',#80002,1.); +#80002 = DIRECTION('',(-1.,0.,0.)); +#80003 = ORIENTED_EDGE('',*,*,#80004,.F.); +#80004 = EDGE_CURVE('',#80005,#79997,#80007,.T.); +#80005 = VERTEX_POINT('',#80006); +#80006 = CARTESIAN_POINT('',(4.14,-1.425,-1.41)); +#80007 = LINE('',#80008,#80009); +#80008 = CARTESIAN_POINT('',(3.970735294118,-1.425,-0.732941176471)); +#80009 = VECTOR('',#80010,1.); +#80010 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80011 = ORIENTED_EDGE('',*,*,#80012,.F.); +#80012 = EDGE_CURVE('',#80013,#80005,#80015,.T.); +#80013 = VERTEX_POINT('',#80014); +#80014 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80015 = LINE('',#80016,#80017); +#80016 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80017 = VECTOR('',#80018,1.); +#80018 = DIRECTION('',(0.,0.,-1.)); +#80019 = ORIENTED_EDGE('',*,*,#80020,.F.); +#80020 = EDGE_CURVE('',#79979,#80013,#80021,.T.); +#80021 = LINE('',#80022,#80023); +#80022 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#80023 = VECTOR('',#80024,1.); +#80024 = DIRECTION('',(-1.,0.,0.)); +#80025 = PLANE('',#80026); +#80026 = AXIS2_PLACEMENT_3D('',#80027,#80028,#80029); +#80027 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#80028 = DIRECTION('',(0.,1.,0.)); +#80029 = DIRECTION('',(-1.,0.,0.)); +#80030 = ADVANCED_FACE('',(#80031),#80056,.F.); +#80031 = FACE_BOUND('',#80032,.F.); +#80032 = EDGE_LOOP('',(#80033,#80043,#80049,#80050)); +#80033 = ORIENTED_EDGE('',*,*,#80034,.T.); +#80034 = EDGE_CURVE('',#80035,#80037,#80039,.T.); +#80035 = VERTEX_POINT('',#80036); +#80036 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80037 = VERTEX_POINT('',#80038); +#80038 = CARTESIAN_POINT('',(4.36,-1.275,-1.41)); +#80039 = LINE('',#80040,#80041); +#80040 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80041 = VECTOR('',#80042,1.); +#80042 = DIRECTION('',(0.,0.,-1.)); +#80043 = ORIENTED_EDGE('',*,*,#80044,.T.); +#80044 = EDGE_CURVE('',#80037,#79981,#80045,.T.); +#80045 = LINE('',#80046,#80047); +#80046 = CARTESIAN_POINT('',(4.36,-1.275,-1.41)); +#80047 = VECTOR('',#80048,1.); +#80048 = DIRECTION('',(0.,-1.,0.)); +#80049 = ORIENTED_EDGE('',*,*,#79978,.F.); +#80050 = ORIENTED_EDGE('',*,*,#80051,.F.); +#80051 = EDGE_CURVE('',#80035,#79979,#80052,.T.); +#80052 = LINE('',#80053,#80054); +#80053 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80054 = VECTOR('',#80055,1.); +#80055 = DIRECTION('',(0.,-1.,0.)); +#80056 = PLANE('',#80057); +#80057 = AXIS2_PLACEMENT_3D('',#80058,#80059,#80060); +#80058 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80059 = DIRECTION('',(-1.,-0.,-0.)); +#80060 = DIRECTION('',(0.,-1.,0.)); +#80061 = ADVANCED_FACE('',(#80062),#80080,.T.); +#80062 = FACE_BOUND('',#80063,.T.); +#80063 = EDGE_LOOP('',(#80064,#80072,#80073,#80074)); +#80064 = ORIENTED_EDGE('',*,*,#80065,.F.); +#80065 = EDGE_CURVE('',#80037,#80066,#80068,.T.); +#80066 = VERTEX_POINT('',#80067); +#80067 = CARTESIAN_POINT('',(4.31,-1.275,-1.61)); +#80068 = LINE('',#80069,#80070); +#80069 = CARTESIAN_POINT('',(4.529264705882,-1.275,-0.732941176471)); +#80070 = VECTOR('',#80071,1.); +#80071 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80072 = ORIENTED_EDGE('',*,*,#80044,.T.); +#80073 = ORIENTED_EDGE('',*,*,#79988,.T.); +#80074 = ORIENTED_EDGE('',*,*,#80075,.F.); +#80075 = EDGE_CURVE('',#80066,#79989,#80076,.T.); +#80076 = LINE('',#80077,#80078); +#80077 = CARTESIAN_POINT('',(4.31,-1.275,-1.61)); +#80078 = VECTOR('',#80079,1.); +#80079 = DIRECTION('',(0.,-1.,0.)); +#80080 = PLANE('',#80081); +#80081 = AXIS2_PLACEMENT_3D('',#80082,#80083,#80084); +#80082 = CARTESIAN_POINT('',(4.335,-1.275,-1.51)); +#80083 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80084 = DIRECTION('',(0.,-1.,0.)); +#80085 = ADVANCED_FACE('',(#80086),#80104,.T.); +#80086 = FACE_BOUND('',#80087,.F.); +#80087 = EDGE_LOOP('',(#80088,#80089,#80097,#80103)); +#80088 = ORIENTED_EDGE('',*,*,#80020,.T.); +#80089 = ORIENTED_EDGE('',*,*,#80090,.T.); +#80090 = EDGE_CURVE('',#80013,#80091,#80093,.T.); +#80091 = VERTEX_POINT('',#80092); +#80092 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80093 = LINE('',#80094,#80095); +#80094 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80095 = VECTOR('',#80096,1.); +#80096 = DIRECTION('',(0.,1.,0.)); +#80097 = ORIENTED_EDGE('',*,*,#80098,.T.); +#80098 = EDGE_CURVE('',#80091,#80035,#80099,.T.); +#80099 = LINE('',#80100,#80101); +#80100 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80101 = VECTOR('',#80102,1.); +#80102 = DIRECTION('',(1.,0.,0.)); +#80103 = ORIENTED_EDGE('',*,*,#80051,.T.); +#80104 = PLANE('',#80105); +#80105 = AXIS2_PLACEMENT_3D('',#80106,#80107,#80108); +#80106 = CARTESIAN_POINT('',(4.25,-1.35,0.19)); +#80107 = DIRECTION('',(0.,0.,1.)); +#80108 = DIRECTION('',(1.,0.,-0.)); +#80109 = ADVANCED_FACE('',(#80110),#80128,.F.); +#80110 = FACE_BOUND('',#80111,.F.); +#80111 = EDGE_LOOP('',(#80112,#80113,#80114,#80122)); +#80112 = ORIENTED_EDGE('',*,*,#79996,.F.); +#80113 = ORIENTED_EDGE('',*,*,#80075,.F.); +#80114 = ORIENTED_EDGE('',*,*,#80115,.F.); +#80115 = EDGE_CURVE('',#80116,#80066,#80118,.T.); +#80116 = VERTEX_POINT('',#80117); +#80117 = CARTESIAN_POINT('',(4.19,-1.275,-1.61)); +#80118 = LINE('',#80119,#80120); +#80119 = CARTESIAN_POINT('',(4.14,-1.275,-1.61)); +#80120 = VECTOR('',#80121,1.); +#80121 = DIRECTION('',(1.,0.,0.)); +#80122 = ORIENTED_EDGE('',*,*,#80123,.F.); +#80123 = EDGE_CURVE('',#79997,#80116,#80124,.T.); +#80124 = LINE('',#80125,#80126); +#80125 = CARTESIAN_POINT('',(4.19,-1.425,-1.61)); +#80126 = VECTOR('',#80127,1.); +#80127 = DIRECTION('',(0.,1.,0.)); +#80128 = PLANE('',#80129); +#80129 = AXIS2_PLACEMENT_3D('',#80130,#80131,#80132); +#80130 = CARTESIAN_POINT('',(4.25,-1.35,-1.61)); +#80131 = DIRECTION('',(0.,0.,1.)); +#80132 = DIRECTION('',(1.,0.,-0.)); +#80133 = ADVANCED_FACE('',(#80134),#80152,.F.); +#80134 = FACE_BOUND('',#80135,.F.); +#80135 = EDGE_LOOP('',(#80136,#80137,#80145,#80151)); +#80136 = ORIENTED_EDGE('',*,*,#80012,.T.); +#80137 = ORIENTED_EDGE('',*,*,#80138,.T.); +#80138 = EDGE_CURVE('',#80005,#80139,#80141,.T.); +#80139 = VERTEX_POINT('',#80140); +#80140 = CARTESIAN_POINT('',(4.14,-1.275,-1.41)); +#80141 = LINE('',#80142,#80143); +#80142 = CARTESIAN_POINT('',(4.14,-1.425,-1.41)); +#80143 = VECTOR('',#80144,1.); +#80144 = DIRECTION('',(0.,1.,0.)); +#80145 = ORIENTED_EDGE('',*,*,#80146,.F.); +#80146 = EDGE_CURVE('',#80091,#80139,#80147,.T.); +#80147 = LINE('',#80148,#80149); +#80148 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80149 = VECTOR('',#80150,1.); +#80150 = DIRECTION('',(0.,0.,-1.)); +#80151 = ORIENTED_EDGE('',*,*,#80090,.F.); +#80152 = PLANE('',#80153); +#80153 = AXIS2_PLACEMENT_3D('',#80154,#80155,#80156); +#80154 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80155 = DIRECTION('',(1.,0.,0.)); +#80156 = DIRECTION('',(-0.,1.,0.)); +#80157 = ADVANCED_FACE('',(#80158),#80169,.T.); +#80158 = FACE_BOUND('',#80159,.T.); +#80159 = EDGE_LOOP('',(#80160,#80161,#80162,#80168)); +#80160 = ORIENTED_EDGE('',*,*,#80004,.F.); +#80161 = ORIENTED_EDGE('',*,*,#80138,.T.); +#80162 = ORIENTED_EDGE('',*,*,#80163,.T.); +#80163 = EDGE_CURVE('',#80139,#80116,#80164,.T.); +#80164 = LINE('',#80165,#80166); +#80165 = CARTESIAN_POINT('',(3.964264705882,-1.275,-0.707058823529)); +#80166 = VECTOR('',#80167,1.); +#80167 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80168 = ORIENTED_EDGE('',*,*,#80123,.F.); +#80169 = PLANE('',#80170); +#80170 = AXIS2_PLACEMENT_3D('',#80171,#80172,#80173); +#80171 = CARTESIAN_POINT('',(4.165,-1.425,-1.51)); +#80172 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80173 = DIRECTION('',(0.,1.,0.)); +#80174 = ADVANCED_FACE('',(#80175),#80183,.F.); +#80175 = FACE_BOUND('',#80176,.F.); +#80176 = EDGE_LOOP('',(#80177,#80178,#80179,#80180,#80181,#80182)); +#80177 = ORIENTED_EDGE('',*,*,#80146,.T.); +#80178 = ORIENTED_EDGE('',*,*,#80163,.T.); +#80179 = ORIENTED_EDGE('',*,*,#80115,.T.); +#80180 = ORIENTED_EDGE('',*,*,#80065,.F.); +#80181 = ORIENTED_EDGE('',*,*,#80034,.F.); +#80182 = ORIENTED_EDGE('',*,*,#80098,.F.); +#80183 = PLANE('',#80184); +#80184 = AXIS2_PLACEMENT_3D('',#80185,#80186,#80187); +#80185 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80186 = DIRECTION('',(0.,-1.,0.)); +#80187 = DIRECTION('',(1.,0.,0.)); +#80188 = MANIFOLD_SOLID_BREP('',#80189); +#80189 = CLOSED_SHELL('',(#80190,#80246,#80277,#80301,#80325,#80349, + #80373,#80390)); +#80190 = ADVANCED_FACE('',(#80191),#80241,.F.); +#80191 = FACE_BOUND('',#80192,.F.); +#80192 = EDGE_LOOP('',(#80193,#80203,#80211,#80219,#80227,#80235)); +#80193 = ORIENTED_EDGE('',*,*,#80194,.T.); +#80194 = EDGE_CURVE('',#80195,#80197,#80199,.T.); +#80195 = VERTEX_POINT('',#80196); +#80196 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80197 = VERTEX_POINT('',#80198); +#80198 = CARTESIAN_POINT('',(4.36,-7.5E-02,-1.41)); +#80199 = LINE('',#80200,#80201); +#80200 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80201 = VECTOR('',#80202,1.); +#80202 = DIRECTION('',(0.,0.,-1.)); +#80203 = ORIENTED_EDGE('',*,*,#80204,.T.); +#80204 = EDGE_CURVE('',#80197,#80205,#80207,.T.); +#80205 = VERTEX_POINT('',#80206); +#80206 = CARTESIAN_POINT('',(4.31,-7.5E-02,-1.61)); +#80207 = LINE('',#80208,#80209); +#80208 = CARTESIAN_POINT('',(4.535735294118,-7.5E-02,-0.707058823529)); +#80209 = VECTOR('',#80210,1.); +#80210 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80211 = ORIENTED_EDGE('',*,*,#80212,.T.); +#80212 = EDGE_CURVE('',#80205,#80213,#80215,.T.); +#80213 = VERTEX_POINT('',#80214); +#80214 = CARTESIAN_POINT('',(4.19,-7.5E-02,-1.61)); +#80215 = LINE('',#80216,#80217); +#80216 = CARTESIAN_POINT('',(4.36,-7.5E-02,-1.61)); +#80217 = VECTOR('',#80218,1.); +#80218 = DIRECTION('',(-1.,0.,0.)); +#80219 = ORIENTED_EDGE('',*,*,#80220,.F.); +#80220 = EDGE_CURVE('',#80221,#80213,#80223,.T.); +#80221 = VERTEX_POINT('',#80222); +#80222 = CARTESIAN_POINT('',(4.14,-7.5E-02,-1.41)); +#80223 = LINE('',#80224,#80225); +#80224 = CARTESIAN_POINT('',(3.970735294118,-7.5E-02,-0.732941176471)); +#80225 = VECTOR('',#80226,1.); +#80226 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80227 = ORIENTED_EDGE('',*,*,#80228,.F.); +#80228 = EDGE_CURVE('',#80229,#80221,#80231,.T.); +#80229 = VERTEX_POINT('',#80230); +#80230 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80231 = LINE('',#80232,#80233); +#80232 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80233 = VECTOR('',#80234,1.); +#80234 = DIRECTION('',(0.,0.,-1.)); +#80235 = ORIENTED_EDGE('',*,*,#80236,.F.); +#80236 = EDGE_CURVE('',#80195,#80229,#80237,.T.); +#80237 = LINE('',#80238,#80239); +#80238 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80239 = VECTOR('',#80240,1.); +#80240 = DIRECTION('',(-1.,0.,0.)); +#80241 = PLANE('',#80242); +#80242 = AXIS2_PLACEMENT_3D('',#80243,#80244,#80245); +#80243 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80244 = DIRECTION('',(0.,1.,0.)); +#80245 = DIRECTION('',(-1.,0.,0.)); +#80246 = ADVANCED_FACE('',(#80247),#80272,.F.); +#80247 = FACE_BOUND('',#80248,.F.); +#80248 = EDGE_LOOP('',(#80249,#80259,#80265,#80266)); +#80249 = ORIENTED_EDGE('',*,*,#80250,.T.); +#80250 = EDGE_CURVE('',#80251,#80253,#80255,.T.); +#80251 = VERTEX_POINT('',#80252); +#80252 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80253 = VERTEX_POINT('',#80254); +#80254 = CARTESIAN_POINT('',(4.36,7.5E-02,-1.41)); +#80255 = LINE('',#80256,#80257); +#80256 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80257 = VECTOR('',#80258,1.); +#80258 = DIRECTION('',(0.,0.,-1.)); +#80259 = ORIENTED_EDGE('',*,*,#80260,.T.); +#80260 = EDGE_CURVE('',#80253,#80197,#80261,.T.); +#80261 = LINE('',#80262,#80263); +#80262 = CARTESIAN_POINT('',(4.36,7.5E-02,-1.41)); +#80263 = VECTOR('',#80264,1.); +#80264 = DIRECTION('',(0.,-1.,0.)); +#80265 = ORIENTED_EDGE('',*,*,#80194,.F.); +#80266 = ORIENTED_EDGE('',*,*,#80267,.F.); +#80267 = EDGE_CURVE('',#80251,#80195,#80268,.T.); +#80268 = LINE('',#80269,#80270); +#80269 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80270 = VECTOR('',#80271,1.); +#80271 = DIRECTION('',(0.,-1.,0.)); +#80272 = PLANE('',#80273); +#80273 = AXIS2_PLACEMENT_3D('',#80274,#80275,#80276); +#80274 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80275 = DIRECTION('',(-1.,-0.,-0.)); +#80276 = DIRECTION('',(0.,-1.,0.)); +#80277 = ADVANCED_FACE('',(#80278),#80296,.T.); +#80278 = FACE_BOUND('',#80279,.T.); +#80279 = EDGE_LOOP('',(#80280,#80288,#80289,#80290)); +#80280 = ORIENTED_EDGE('',*,*,#80281,.F.); +#80281 = EDGE_CURVE('',#80253,#80282,#80284,.T.); +#80282 = VERTEX_POINT('',#80283); +#80283 = CARTESIAN_POINT('',(4.31,7.5E-02,-1.61)); +#80284 = LINE('',#80285,#80286); +#80285 = CARTESIAN_POINT('',(4.529264705882,7.5E-02,-0.732941176471)); +#80286 = VECTOR('',#80287,1.); +#80287 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80288 = ORIENTED_EDGE('',*,*,#80260,.T.); +#80289 = ORIENTED_EDGE('',*,*,#80204,.T.); +#80290 = ORIENTED_EDGE('',*,*,#80291,.F.); +#80291 = EDGE_CURVE('',#80282,#80205,#80292,.T.); +#80292 = LINE('',#80293,#80294); +#80293 = CARTESIAN_POINT('',(4.31,7.5E-02,-1.61)); +#80294 = VECTOR('',#80295,1.); +#80295 = DIRECTION('',(0.,-1.,0.)); +#80296 = PLANE('',#80297); +#80297 = AXIS2_PLACEMENT_3D('',#80298,#80299,#80300); +#80298 = CARTESIAN_POINT('',(4.335,7.5E-02,-1.51)); +#80299 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80300 = DIRECTION('',(0.,-1.,0.)); +#80301 = ADVANCED_FACE('',(#80302),#80320,.T.); +#80302 = FACE_BOUND('',#80303,.F.); +#80303 = EDGE_LOOP('',(#80304,#80305,#80313,#80319)); +#80304 = ORIENTED_EDGE('',*,*,#80236,.T.); +#80305 = ORIENTED_EDGE('',*,*,#80306,.T.); +#80306 = EDGE_CURVE('',#80229,#80307,#80309,.T.); +#80307 = VERTEX_POINT('',#80308); +#80308 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80309 = LINE('',#80310,#80311); +#80310 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80311 = VECTOR('',#80312,1.); +#80312 = DIRECTION('',(0.,1.,0.)); +#80313 = ORIENTED_EDGE('',*,*,#80314,.T.); +#80314 = EDGE_CURVE('',#80307,#80251,#80315,.T.); +#80315 = LINE('',#80316,#80317); +#80316 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80317 = VECTOR('',#80318,1.); +#80318 = DIRECTION('',(1.,0.,0.)); +#80319 = ORIENTED_EDGE('',*,*,#80267,.T.); +#80320 = PLANE('',#80321); +#80321 = AXIS2_PLACEMENT_3D('',#80322,#80323,#80324); +#80322 = CARTESIAN_POINT('',(4.25,0.,0.19)); +#80323 = DIRECTION('',(0.,0.,1.)); +#80324 = DIRECTION('',(1.,0.,-0.)); +#80325 = ADVANCED_FACE('',(#80326),#80344,.F.); +#80326 = FACE_BOUND('',#80327,.F.); +#80327 = EDGE_LOOP('',(#80328,#80329,#80330,#80338)); +#80328 = ORIENTED_EDGE('',*,*,#80212,.F.); +#80329 = ORIENTED_EDGE('',*,*,#80291,.F.); +#80330 = ORIENTED_EDGE('',*,*,#80331,.F.); +#80331 = EDGE_CURVE('',#80332,#80282,#80334,.T.); +#80332 = VERTEX_POINT('',#80333); +#80333 = CARTESIAN_POINT('',(4.19,7.5E-02,-1.61)); +#80334 = LINE('',#80335,#80336); +#80335 = CARTESIAN_POINT('',(4.14,7.5E-02,-1.61)); +#80336 = VECTOR('',#80337,1.); +#80337 = DIRECTION('',(1.,0.,0.)); +#80338 = ORIENTED_EDGE('',*,*,#80339,.F.); +#80339 = EDGE_CURVE('',#80213,#80332,#80340,.T.); +#80340 = LINE('',#80341,#80342); +#80341 = CARTESIAN_POINT('',(4.19,-7.5E-02,-1.61)); +#80342 = VECTOR('',#80343,1.); +#80343 = DIRECTION('',(0.,1.,0.)); +#80344 = PLANE('',#80345); +#80345 = AXIS2_PLACEMENT_3D('',#80346,#80347,#80348); +#80346 = CARTESIAN_POINT('',(4.25,0.,-1.61)); +#80347 = DIRECTION('',(0.,0.,1.)); +#80348 = DIRECTION('',(1.,0.,-0.)); +#80349 = ADVANCED_FACE('',(#80350),#80368,.F.); +#80350 = FACE_BOUND('',#80351,.F.); +#80351 = EDGE_LOOP('',(#80352,#80353,#80361,#80367)); +#80352 = ORIENTED_EDGE('',*,*,#80228,.T.); +#80353 = ORIENTED_EDGE('',*,*,#80354,.T.); +#80354 = EDGE_CURVE('',#80221,#80355,#80357,.T.); +#80355 = VERTEX_POINT('',#80356); +#80356 = CARTESIAN_POINT('',(4.14,7.5E-02,-1.41)); +#80357 = LINE('',#80358,#80359); +#80358 = CARTESIAN_POINT('',(4.14,-7.5E-02,-1.41)); +#80359 = VECTOR('',#80360,1.); +#80360 = DIRECTION('',(0.,1.,0.)); +#80361 = ORIENTED_EDGE('',*,*,#80362,.F.); +#80362 = EDGE_CURVE('',#80307,#80355,#80363,.T.); +#80363 = LINE('',#80364,#80365); +#80364 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80365 = VECTOR('',#80366,1.); +#80366 = DIRECTION('',(0.,0.,-1.)); +#80367 = ORIENTED_EDGE('',*,*,#80306,.F.); +#80368 = PLANE('',#80369); +#80369 = AXIS2_PLACEMENT_3D('',#80370,#80371,#80372); +#80370 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80371 = DIRECTION('',(1.,0.,0.)); +#80372 = DIRECTION('',(-0.,1.,0.)); +#80373 = ADVANCED_FACE('',(#80374),#80385,.T.); +#80374 = FACE_BOUND('',#80375,.T.); +#80375 = EDGE_LOOP('',(#80376,#80377,#80378,#80384)); +#80376 = ORIENTED_EDGE('',*,*,#80220,.F.); +#80377 = ORIENTED_EDGE('',*,*,#80354,.T.); +#80378 = ORIENTED_EDGE('',*,*,#80379,.T.); +#80379 = EDGE_CURVE('',#80355,#80332,#80380,.T.); +#80380 = LINE('',#80381,#80382); +#80381 = CARTESIAN_POINT('',(3.964264705882,7.5E-02,-0.707058823529)); +#80382 = VECTOR('',#80383,1.); +#80383 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80384 = ORIENTED_EDGE('',*,*,#80339,.F.); +#80385 = PLANE('',#80386); +#80386 = AXIS2_PLACEMENT_3D('',#80387,#80388,#80389); +#80387 = CARTESIAN_POINT('',(4.165,-7.5E-02,-1.51)); +#80388 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80389 = DIRECTION('',(0.,1.,0.)); +#80390 = ADVANCED_FACE('',(#80391),#80399,.F.); +#80391 = FACE_BOUND('',#80392,.F.); +#80392 = EDGE_LOOP('',(#80393,#80394,#80395,#80396,#80397,#80398)); +#80393 = ORIENTED_EDGE('',*,*,#80362,.T.); +#80394 = ORIENTED_EDGE('',*,*,#80379,.T.); +#80395 = ORIENTED_EDGE('',*,*,#80331,.T.); +#80396 = ORIENTED_EDGE('',*,*,#80281,.F.); +#80397 = ORIENTED_EDGE('',*,*,#80250,.F.); +#80398 = ORIENTED_EDGE('',*,*,#80314,.F.); +#80399 = PLANE('',#80400); +#80400 = AXIS2_PLACEMENT_3D('',#80401,#80402,#80403); +#80401 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80402 = DIRECTION('',(0.,-1.,0.)); +#80403 = DIRECTION('',(1.,0.,0.)); +#80404 = MANIFOLD_SOLID_BREP('',#80405); +#80405 = CLOSED_SHELL('',(#80406,#80462,#80493,#80517,#80541,#80565, + #80589,#80606)); +#80406 = ADVANCED_FACE('',(#80407),#80457,.F.); +#80407 = FACE_BOUND('',#80408,.F.); +#80408 = EDGE_LOOP('',(#80409,#80419,#80427,#80435,#80443,#80451)); +#80409 = ORIENTED_EDGE('',*,*,#80410,.T.); +#80410 = EDGE_CURVE('',#80411,#80413,#80415,.T.); +#80411 = VERTEX_POINT('',#80412); +#80412 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80413 = VERTEX_POINT('',#80414); +#80414 = CARTESIAN_POINT('',(5.21,-1.425,-1.41)); +#80415 = LINE('',#80416,#80417); +#80416 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80417 = VECTOR('',#80418,1.); +#80418 = DIRECTION('',(0.,0.,-1.)); +#80419 = ORIENTED_EDGE('',*,*,#80420,.T.); +#80420 = EDGE_CURVE('',#80413,#80421,#80423,.T.); +#80421 = VERTEX_POINT('',#80422); +#80422 = CARTESIAN_POINT('',(5.16,-1.425,-1.61)); +#80423 = LINE('',#80424,#80425); +#80424 = CARTESIAN_POINT('',(5.385735294118,-1.425,-0.707058823529)); +#80425 = VECTOR('',#80426,1.); +#80426 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80427 = ORIENTED_EDGE('',*,*,#80428,.T.); +#80428 = EDGE_CURVE('',#80421,#80429,#80431,.T.); +#80429 = VERTEX_POINT('',#80430); +#80430 = CARTESIAN_POINT('',(5.04,-1.425,-1.61)); +#80431 = LINE('',#80432,#80433); +#80432 = CARTESIAN_POINT('',(5.21,-1.425,-1.61)); +#80433 = VECTOR('',#80434,1.); +#80434 = DIRECTION('',(-1.,0.,0.)); +#80435 = ORIENTED_EDGE('',*,*,#80436,.F.); +#80436 = EDGE_CURVE('',#80437,#80429,#80439,.T.); +#80437 = VERTEX_POINT('',#80438); +#80438 = CARTESIAN_POINT('',(4.99,-1.425,-1.41)); +#80439 = LINE('',#80440,#80441); +#80440 = CARTESIAN_POINT('',(4.820735294118,-1.425,-0.732941176471)); +#80441 = VECTOR('',#80442,1.); +#80442 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80443 = ORIENTED_EDGE('',*,*,#80444,.F.); +#80444 = EDGE_CURVE('',#80445,#80437,#80447,.T.); +#80445 = VERTEX_POINT('',#80446); +#80446 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80447 = LINE('',#80448,#80449); +#80448 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80449 = VECTOR('',#80450,1.); +#80450 = DIRECTION('',(0.,0.,-1.)); +#80451 = ORIENTED_EDGE('',*,*,#80452,.F.); +#80452 = EDGE_CURVE('',#80411,#80445,#80453,.T.); +#80453 = LINE('',#80454,#80455); +#80454 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80455 = VECTOR('',#80456,1.); +#80456 = DIRECTION('',(-1.,0.,0.)); +#80457 = PLANE('',#80458); +#80458 = AXIS2_PLACEMENT_3D('',#80459,#80460,#80461); +#80459 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80460 = DIRECTION('',(0.,1.,0.)); +#80461 = DIRECTION('',(-1.,0.,0.)); +#80462 = ADVANCED_FACE('',(#80463),#80488,.F.); +#80463 = FACE_BOUND('',#80464,.F.); +#80464 = EDGE_LOOP('',(#80465,#80475,#80481,#80482)); +#80465 = ORIENTED_EDGE('',*,*,#80466,.T.); +#80466 = EDGE_CURVE('',#80467,#80469,#80471,.T.); +#80467 = VERTEX_POINT('',#80468); +#80468 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80469 = VERTEX_POINT('',#80470); +#80470 = CARTESIAN_POINT('',(5.21,-1.275,-1.41)); +#80471 = LINE('',#80472,#80473); +#80472 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80473 = VECTOR('',#80474,1.); +#80474 = DIRECTION('',(0.,0.,-1.)); +#80475 = ORIENTED_EDGE('',*,*,#80476,.T.); +#80476 = EDGE_CURVE('',#80469,#80413,#80477,.T.); +#80477 = LINE('',#80478,#80479); +#80478 = CARTESIAN_POINT('',(5.21,-1.275,-1.41)); +#80479 = VECTOR('',#80480,1.); +#80480 = DIRECTION('',(0.,-1.,0.)); +#80481 = ORIENTED_EDGE('',*,*,#80410,.F.); +#80482 = ORIENTED_EDGE('',*,*,#80483,.F.); +#80483 = EDGE_CURVE('',#80467,#80411,#80484,.T.); +#80484 = LINE('',#80485,#80486); +#80485 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80486 = VECTOR('',#80487,1.); +#80487 = DIRECTION('',(0.,-1.,0.)); +#80488 = PLANE('',#80489); +#80489 = AXIS2_PLACEMENT_3D('',#80490,#80491,#80492); +#80490 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80491 = DIRECTION('',(-1.,-0.,-0.)); +#80492 = DIRECTION('',(0.,-1.,0.)); +#80493 = ADVANCED_FACE('',(#80494),#80512,.T.); +#80494 = FACE_BOUND('',#80495,.T.); +#80495 = EDGE_LOOP('',(#80496,#80504,#80505,#80506)); +#80496 = ORIENTED_EDGE('',*,*,#80497,.F.); +#80497 = EDGE_CURVE('',#80469,#80498,#80500,.T.); +#80498 = VERTEX_POINT('',#80499); +#80499 = CARTESIAN_POINT('',(5.16,-1.275,-1.61)); +#80500 = LINE('',#80501,#80502); +#80501 = CARTESIAN_POINT('',(5.379264705882,-1.275,-0.732941176471)); +#80502 = VECTOR('',#80503,1.); +#80503 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80504 = ORIENTED_EDGE('',*,*,#80476,.T.); +#80505 = ORIENTED_EDGE('',*,*,#80420,.T.); +#80506 = ORIENTED_EDGE('',*,*,#80507,.F.); +#80507 = EDGE_CURVE('',#80498,#80421,#80508,.T.); +#80508 = LINE('',#80509,#80510); +#80509 = CARTESIAN_POINT('',(5.16,-1.275,-1.61)); +#80510 = VECTOR('',#80511,1.); +#80511 = DIRECTION('',(0.,-1.,0.)); +#80512 = PLANE('',#80513); +#80513 = AXIS2_PLACEMENT_3D('',#80514,#80515,#80516); +#80514 = CARTESIAN_POINT('',(5.185,-1.275,-1.51)); +#80515 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80516 = DIRECTION('',(0.,-1.,0.)); +#80517 = ADVANCED_FACE('',(#80518),#80536,.T.); +#80518 = FACE_BOUND('',#80519,.F.); +#80519 = EDGE_LOOP('',(#80520,#80521,#80529,#80535)); +#80520 = ORIENTED_EDGE('',*,*,#80452,.T.); +#80521 = ORIENTED_EDGE('',*,*,#80522,.T.); +#80522 = EDGE_CURVE('',#80445,#80523,#80525,.T.); +#80523 = VERTEX_POINT('',#80524); +#80524 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80525 = LINE('',#80526,#80527); +#80526 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80527 = VECTOR('',#80528,1.); +#80528 = DIRECTION('',(0.,1.,0.)); +#80529 = ORIENTED_EDGE('',*,*,#80530,.T.); +#80530 = EDGE_CURVE('',#80523,#80467,#80531,.T.); +#80531 = LINE('',#80532,#80533); +#80532 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80533 = VECTOR('',#80534,1.); +#80534 = DIRECTION('',(1.,0.,0.)); +#80535 = ORIENTED_EDGE('',*,*,#80483,.T.); +#80536 = PLANE('',#80537); +#80537 = AXIS2_PLACEMENT_3D('',#80538,#80539,#80540); +#80538 = CARTESIAN_POINT('',(5.1,-1.35,0.19)); +#80539 = DIRECTION('',(0.,0.,1.)); +#80540 = DIRECTION('',(1.,0.,-0.)); +#80541 = ADVANCED_FACE('',(#80542),#80560,.F.); +#80542 = FACE_BOUND('',#80543,.F.); +#80543 = EDGE_LOOP('',(#80544,#80545,#80546,#80554)); +#80544 = ORIENTED_EDGE('',*,*,#80428,.F.); +#80545 = ORIENTED_EDGE('',*,*,#80507,.F.); +#80546 = ORIENTED_EDGE('',*,*,#80547,.F.); +#80547 = EDGE_CURVE('',#80548,#80498,#80550,.T.); +#80548 = VERTEX_POINT('',#80549); +#80549 = CARTESIAN_POINT('',(5.04,-1.275,-1.61)); +#80550 = LINE('',#80551,#80552); +#80551 = CARTESIAN_POINT('',(4.99,-1.275,-1.61)); +#80552 = VECTOR('',#80553,1.); +#80553 = DIRECTION('',(1.,0.,0.)); +#80554 = ORIENTED_EDGE('',*,*,#80555,.F.); +#80555 = EDGE_CURVE('',#80429,#80548,#80556,.T.); +#80556 = LINE('',#80557,#80558); +#80557 = CARTESIAN_POINT('',(5.04,-1.425,-1.61)); +#80558 = VECTOR('',#80559,1.); +#80559 = DIRECTION('',(0.,1.,0.)); +#80560 = PLANE('',#80561); +#80561 = AXIS2_PLACEMENT_3D('',#80562,#80563,#80564); +#80562 = CARTESIAN_POINT('',(5.1,-1.35,-1.61)); +#80563 = DIRECTION('',(0.,0.,1.)); +#80564 = DIRECTION('',(1.,0.,-0.)); +#80565 = ADVANCED_FACE('',(#80566),#80584,.F.); +#80566 = FACE_BOUND('',#80567,.F.); +#80567 = EDGE_LOOP('',(#80568,#80569,#80577,#80583)); +#80568 = ORIENTED_EDGE('',*,*,#80444,.T.); +#80569 = ORIENTED_EDGE('',*,*,#80570,.T.); +#80570 = EDGE_CURVE('',#80437,#80571,#80573,.T.); +#80571 = VERTEX_POINT('',#80572); +#80572 = CARTESIAN_POINT('',(4.99,-1.275,-1.41)); +#80573 = LINE('',#80574,#80575); +#80574 = CARTESIAN_POINT('',(4.99,-1.425,-1.41)); +#80575 = VECTOR('',#80576,1.); +#80576 = DIRECTION('',(0.,1.,0.)); +#80577 = ORIENTED_EDGE('',*,*,#80578,.F.); +#80578 = EDGE_CURVE('',#80523,#80571,#80579,.T.); +#80579 = LINE('',#80580,#80581); +#80580 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80581 = VECTOR('',#80582,1.); +#80582 = DIRECTION('',(0.,0.,-1.)); +#80583 = ORIENTED_EDGE('',*,*,#80522,.F.); +#80584 = PLANE('',#80585); +#80585 = AXIS2_PLACEMENT_3D('',#80586,#80587,#80588); +#80586 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80587 = DIRECTION('',(1.,0.,0.)); +#80588 = DIRECTION('',(-0.,1.,0.)); +#80589 = ADVANCED_FACE('',(#80590),#80601,.T.); +#80590 = FACE_BOUND('',#80591,.T.); +#80591 = EDGE_LOOP('',(#80592,#80593,#80594,#80600)); +#80592 = ORIENTED_EDGE('',*,*,#80436,.F.); +#80593 = ORIENTED_EDGE('',*,*,#80570,.T.); +#80594 = ORIENTED_EDGE('',*,*,#80595,.T.); +#80595 = EDGE_CURVE('',#80571,#80548,#80596,.T.); +#80596 = LINE('',#80597,#80598); +#80597 = CARTESIAN_POINT('',(4.814264705882,-1.275,-0.707058823529)); +#80598 = VECTOR('',#80599,1.); +#80599 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80600 = ORIENTED_EDGE('',*,*,#80555,.F.); +#80601 = PLANE('',#80602); +#80602 = AXIS2_PLACEMENT_3D('',#80603,#80604,#80605); +#80603 = CARTESIAN_POINT('',(5.015,-1.425,-1.51)); +#80604 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80605 = DIRECTION('',(0.,1.,0.)); +#80606 = ADVANCED_FACE('',(#80607),#80615,.F.); +#80607 = FACE_BOUND('',#80608,.F.); +#80608 = EDGE_LOOP('',(#80609,#80610,#80611,#80612,#80613,#80614)); +#80609 = ORIENTED_EDGE('',*,*,#80578,.T.); +#80610 = ORIENTED_EDGE('',*,*,#80595,.T.); +#80611 = ORIENTED_EDGE('',*,*,#80547,.T.); +#80612 = ORIENTED_EDGE('',*,*,#80497,.F.); +#80613 = ORIENTED_EDGE('',*,*,#80466,.F.); +#80614 = ORIENTED_EDGE('',*,*,#80530,.F.); +#80615 = PLANE('',#80616); +#80616 = AXIS2_PLACEMENT_3D('',#80617,#80618,#80619); +#80617 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80618 = DIRECTION('',(0.,-1.,0.)); +#80619 = DIRECTION('',(1.,0.,0.)); +#80620 = MANIFOLD_SOLID_BREP('',#80621); +#80621 = CLOSED_SHELL('',(#80622,#80678,#80709,#80733,#80757,#80781, + #80805,#80822)); +#80622 = ADVANCED_FACE('',(#80623),#80673,.F.); +#80623 = FACE_BOUND('',#80624,.F.); +#80624 = EDGE_LOOP('',(#80625,#80635,#80643,#80651,#80659,#80667)); +#80625 = ORIENTED_EDGE('',*,*,#80626,.T.); +#80626 = EDGE_CURVE('',#80627,#80629,#80631,.T.); +#80627 = VERTEX_POINT('',#80628); +#80628 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80629 = VERTEX_POINT('',#80630); +#80630 = CARTESIAN_POINT('',(5.21,-7.5E-02,-1.41)); +#80631 = LINE('',#80632,#80633); +#80632 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80633 = VECTOR('',#80634,1.); +#80634 = DIRECTION('',(0.,0.,-1.)); +#80635 = ORIENTED_EDGE('',*,*,#80636,.T.); +#80636 = EDGE_CURVE('',#80629,#80637,#80639,.T.); +#80637 = VERTEX_POINT('',#80638); +#80638 = CARTESIAN_POINT('',(5.16,-7.5E-02,-1.61)); +#80639 = LINE('',#80640,#80641); +#80640 = CARTESIAN_POINT('',(5.385735294118,-7.5E-02,-0.707058823529)); +#80641 = VECTOR('',#80642,1.); +#80642 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80643 = ORIENTED_EDGE('',*,*,#80644,.T.); +#80644 = EDGE_CURVE('',#80637,#80645,#80647,.T.); +#80645 = VERTEX_POINT('',#80646); +#80646 = CARTESIAN_POINT('',(5.04,-7.5E-02,-1.61)); +#80647 = LINE('',#80648,#80649); +#80648 = CARTESIAN_POINT('',(5.21,-7.5E-02,-1.61)); +#80649 = VECTOR('',#80650,1.); +#80650 = DIRECTION('',(-1.,0.,0.)); +#80651 = ORIENTED_EDGE('',*,*,#80652,.F.); +#80652 = EDGE_CURVE('',#80653,#80645,#80655,.T.); +#80653 = VERTEX_POINT('',#80654); +#80654 = CARTESIAN_POINT('',(4.99,-7.5E-02,-1.41)); +#80655 = LINE('',#80656,#80657); +#80656 = CARTESIAN_POINT('',(4.820735294118,-7.5E-02,-0.732941176471)); +#80657 = VECTOR('',#80658,1.); +#80658 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80659 = ORIENTED_EDGE('',*,*,#80660,.F.); +#80660 = EDGE_CURVE('',#80661,#80653,#80663,.T.); +#80661 = VERTEX_POINT('',#80662); +#80662 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80663 = LINE('',#80664,#80665); +#80664 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80665 = VECTOR('',#80666,1.); +#80666 = DIRECTION('',(0.,0.,-1.)); +#80667 = ORIENTED_EDGE('',*,*,#80668,.F.); +#80668 = EDGE_CURVE('',#80627,#80661,#80669,.T.); +#80669 = LINE('',#80670,#80671); +#80670 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80671 = VECTOR('',#80672,1.); +#80672 = DIRECTION('',(-1.,0.,0.)); +#80673 = PLANE('',#80674); +#80674 = AXIS2_PLACEMENT_3D('',#80675,#80676,#80677); +#80675 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80676 = DIRECTION('',(0.,1.,0.)); +#80677 = DIRECTION('',(-1.,0.,0.)); +#80678 = ADVANCED_FACE('',(#80679),#80704,.F.); +#80679 = FACE_BOUND('',#80680,.F.); +#80680 = EDGE_LOOP('',(#80681,#80691,#80697,#80698)); +#80681 = ORIENTED_EDGE('',*,*,#80682,.T.); +#80682 = EDGE_CURVE('',#80683,#80685,#80687,.T.); +#80683 = VERTEX_POINT('',#80684); +#80684 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80685 = VERTEX_POINT('',#80686); +#80686 = CARTESIAN_POINT('',(5.21,7.5E-02,-1.41)); +#80687 = LINE('',#80688,#80689); +#80688 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80689 = VECTOR('',#80690,1.); +#80690 = DIRECTION('',(0.,0.,-1.)); +#80691 = ORIENTED_EDGE('',*,*,#80692,.T.); +#80692 = EDGE_CURVE('',#80685,#80629,#80693,.T.); +#80693 = LINE('',#80694,#80695); +#80694 = CARTESIAN_POINT('',(5.21,7.5E-02,-1.41)); +#80695 = VECTOR('',#80696,1.); +#80696 = DIRECTION('',(0.,-1.,0.)); +#80697 = ORIENTED_EDGE('',*,*,#80626,.F.); +#80698 = ORIENTED_EDGE('',*,*,#80699,.F.); +#80699 = EDGE_CURVE('',#80683,#80627,#80700,.T.); +#80700 = LINE('',#80701,#80702); +#80701 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80702 = VECTOR('',#80703,1.); +#80703 = DIRECTION('',(0.,-1.,0.)); +#80704 = PLANE('',#80705); +#80705 = AXIS2_PLACEMENT_3D('',#80706,#80707,#80708); +#80706 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80707 = DIRECTION('',(-1.,-0.,-0.)); +#80708 = DIRECTION('',(0.,-1.,0.)); +#80709 = ADVANCED_FACE('',(#80710),#80728,.T.); +#80710 = FACE_BOUND('',#80711,.T.); +#80711 = EDGE_LOOP('',(#80712,#80720,#80721,#80722)); +#80712 = ORIENTED_EDGE('',*,*,#80713,.F.); +#80713 = EDGE_CURVE('',#80685,#80714,#80716,.T.); +#80714 = VERTEX_POINT('',#80715); +#80715 = CARTESIAN_POINT('',(5.16,7.5E-02,-1.61)); +#80716 = LINE('',#80717,#80718); +#80717 = CARTESIAN_POINT('',(5.379264705882,7.5E-02,-0.732941176471)); +#80718 = VECTOR('',#80719,1.); +#80719 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80720 = ORIENTED_EDGE('',*,*,#80692,.T.); +#80721 = ORIENTED_EDGE('',*,*,#80636,.T.); +#80722 = ORIENTED_EDGE('',*,*,#80723,.F.); +#80723 = EDGE_CURVE('',#80714,#80637,#80724,.T.); +#80724 = LINE('',#80725,#80726); +#80725 = CARTESIAN_POINT('',(5.16,7.5E-02,-1.61)); +#80726 = VECTOR('',#80727,1.); +#80727 = DIRECTION('',(0.,-1.,0.)); +#80728 = PLANE('',#80729); +#80729 = AXIS2_PLACEMENT_3D('',#80730,#80731,#80732); +#80730 = CARTESIAN_POINT('',(5.185,7.5E-02,-1.51)); +#80731 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80732 = DIRECTION('',(0.,-1.,0.)); +#80733 = ADVANCED_FACE('',(#80734),#80752,.T.); +#80734 = FACE_BOUND('',#80735,.F.); +#80735 = EDGE_LOOP('',(#80736,#80737,#80745,#80751)); +#80736 = ORIENTED_EDGE('',*,*,#80668,.T.); +#80737 = ORIENTED_EDGE('',*,*,#80738,.T.); +#80738 = EDGE_CURVE('',#80661,#80739,#80741,.T.); +#80739 = VERTEX_POINT('',#80740); +#80740 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80741 = LINE('',#80742,#80743); +#80742 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80743 = VECTOR('',#80744,1.); +#80744 = DIRECTION('',(0.,1.,0.)); +#80745 = ORIENTED_EDGE('',*,*,#80746,.T.); +#80746 = EDGE_CURVE('',#80739,#80683,#80747,.T.); +#80747 = LINE('',#80748,#80749); +#80748 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80749 = VECTOR('',#80750,1.); +#80750 = DIRECTION('',(1.,0.,0.)); +#80751 = ORIENTED_EDGE('',*,*,#80699,.T.); +#80752 = PLANE('',#80753); +#80753 = AXIS2_PLACEMENT_3D('',#80754,#80755,#80756); +#80754 = CARTESIAN_POINT('',(5.1,0.,0.19)); +#80755 = DIRECTION('',(0.,0.,1.)); +#80756 = DIRECTION('',(1.,0.,-0.)); +#80757 = ADVANCED_FACE('',(#80758),#80776,.F.); +#80758 = FACE_BOUND('',#80759,.F.); +#80759 = EDGE_LOOP('',(#80760,#80761,#80762,#80770)); +#80760 = ORIENTED_EDGE('',*,*,#80644,.F.); +#80761 = ORIENTED_EDGE('',*,*,#80723,.F.); +#80762 = ORIENTED_EDGE('',*,*,#80763,.F.); +#80763 = EDGE_CURVE('',#80764,#80714,#80766,.T.); +#80764 = VERTEX_POINT('',#80765); +#80765 = CARTESIAN_POINT('',(5.04,7.5E-02,-1.61)); +#80766 = LINE('',#80767,#80768); +#80767 = CARTESIAN_POINT('',(4.99,7.5E-02,-1.61)); +#80768 = VECTOR('',#80769,1.); +#80769 = DIRECTION('',(1.,0.,0.)); +#80770 = ORIENTED_EDGE('',*,*,#80771,.F.); +#80771 = EDGE_CURVE('',#80645,#80764,#80772,.T.); +#80772 = LINE('',#80773,#80774); +#80773 = CARTESIAN_POINT('',(5.04,-7.5E-02,-1.61)); +#80774 = VECTOR('',#80775,1.); +#80775 = DIRECTION('',(0.,1.,0.)); +#80776 = PLANE('',#80777); +#80777 = AXIS2_PLACEMENT_3D('',#80778,#80779,#80780); +#80778 = CARTESIAN_POINT('',(5.1,0.,-1.61)); +#80779 = DIRECTION('',(0.,0.,1.)); +#80780 = DIRECTION('',(1.,0.,-0.)); +#80781 = ADVANCED_FACE('',(#80782),#80800,.F.); +#80782 = FACE_BOUND('',#80783,.F.); +#80783 = EDGE_LOOP('',(#80784,#80785,#80793,#80799)); +#80784 = ORIENTED_EDGE('',*,*,#80660,.T.); +#80785 = ORIENTED_EDGE('',*,*,#80786,.T.); +#80786 = EDGE_CURVE('',#80653,#80787,#80789,.T.); +#80787 = VERTEX_POINT('',#80788); +#80788 = CARTESIAN_POINT('',(4.99,7.5E-02,-1.41)); +#80789 = LINE('',#80790,#80791); +#80790 = CARTESIAN_POINT('',(4.99,-7.5E-02,-1.41)); +#80791 = VECTOR('',#80792,1.); +#80792 = DIRECTION('',(0.,1.,0.)); +#80793 = ORIENTED_EDGE('',*,*,#80794,.F.); +#80794 = EDGE_CURVE('',#80739,#80787,#80795,.T.); +#80795 = LINE('',#80796,#80797); +#80796 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80797 = VECTOR('',#80798,1.); +#80798 = DIRECTION('',(0.,0.,-1.)); +#80799 = ORIENTED_EDGE('',*,*,#80738,.F.); +#80800 = PLANE('',#80801); +#80801 = AXIS2_PLACEMENT_3D('',#80802,#80803,#80804); +#80802 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80803 = DIRECTION('',(1.,0.,0.)); +#80804 = DIRECTION('',(-0.,1.,0.)); +#80805 = ADVANCED_FACE('',(#80806),#80817,.T.); +#80806 = FACE_BOUND('',#80807,.T.); +#80807 = EDGE_LOOP('',(#80808,#80809,#80810,#80816)); +#80808 = ORIENTED_EDGE('',*,*,#80652,.F.); +#80809 = ORIENTED_EDGE('',*,*,#80786,.T.); +#80810 = ORIENTED_EDGE('',*,*,#80811,.T.); +#80811 = EDGE_CURVE('',#80787,#80764,#80812,.T.); +#80812 = LINE('',#80813,#80814); +#80813 = CARTESIAN_POINT('',(4.814264705882,7.5E-02,-0.707058823529)); +#80814 = VECTOR('',#80815,1.); +#80815 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80816 = ORIENTED_EDGE('',*,*,#80771,.F.); +#80817 = PLANE('',#80818); +#80818 = AXIS2_PLACEMENT_3D('',#80819,#80820,#80821); +#80819 = CARTESIAN_POINT('',(5.015,-7.5E-02,-1.51)); +#80820 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80821 = DIRECTION('',(0.,1.,0.)); +#80822 = ADVANCED_FACE('',(#80823),#80831,.F.); +#80823 = FACE_BOUND('',#80824,.F.); +#80824 = EDGE_LOOP('',(#80825,#80826,#80827,#80828,#80829,#80830)); +#80825 = ORIENTED_EDGE('',*,*,#80794,.T.); +#80826 = ORIENTED_EDGE('',*,*,#80811,.T.); +#80827 = ORIENTED_EDGE('',*,*,#80763,.T.); +#80828 = ORIENTED_EDGE('',*,*,#80713,.F.); +#80829 = ORIENTED_EDGE('',*,*,#80682,.F.); +#80830 = ORIENTED_EDGE('',*,*,#80746,.F.); +#80831 = PLANE('',#80832); +#80832 = AXIS2_PLACEMENT_3D('',#80833,#80834,#80835); +#80833 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80834 = DIRECTION('',(0.,-1.,0.)); +#80835 = DIRECTION('',(1.,0.,0.)); +#80836 = MANIFOLD_SOLID_BREP('',#80837); +#80837 = CLOSED_SHELL('',(#80838,#80894,#80925,#80949,#80973,#80997, + #81021,#81038)); +#80838 = ADVANCED_FACE('',(#80839),#80889,.F.); +#80839 = FACE_BOUND('',#80840,.F.); +#80840 = EDGE_LOOP('',(#80841,#80851,#80859,#80867,#80875,#80883)); +#80841 = ORIENTED_EDGE('',*,*,#80842,.T.); +#80842 = EDGE_CURVE('',#80843,#80845,#80847,.T.); +#80843 = VERTEX_POINT('',#80844); +#80844 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80845 = VERTEX_POINT('',#80846); +#80846 = CARTESIAN_POINT('',(6.06,-1.425,-1.41)); +#80847 = LINE('',#80848,#80849); +#80848 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80849 = VECTOR('',#80850,1.); +#80850 = DIRECTION('',(0.,0.,-1.)); +#80851 = ORIENTED_EDGE('',*,*,#80852,.T.); +#80852 = EDGE_CURVE('',#80845,#80853,#80855,.T.); +#80853 = VERTEX_POINT('',#80854); +#80854 = CARTESIAN_POINT('',(6.01,-1.425,-1.61)); +#80855 = LINE('',#80856,#80857); +#80856 = CARTESIAN_POINT('',(6.235735294118,-1.425,-0.707058823529)); +#80857 = VECTOR('',#80858,1.); +#80858 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80859 = ORIENTED_EDGE('',*,*,#80860,.T.); +#80860 = EDGE_CURVE('',#80853,#80861,#80863,.T.); +#80861 = VERTEX_POINT('',#80862); +#80862 = CARTESIAN_POINT('',(5.89,-1.425,-1.61)); +#80863 = LINE('',#80864,#80865); +#80864 = CARTESIAN_POINT('',(6.06,-1.425,-1.61)); +#80865 = VECTOR('',#80866,1.); +#80866 = DIRECTION('',(-1.,0.,0.)); +#80867 = ORIENTED_EDGE('',*,*,#80868,.F.); +#80868 = EDGE_CURVE('',#80869,#80861,#80871,.T.); +#80869 = VERTEX_POINT('',#80870); +#80870 = CARTESIAN_POINT('',(5.84,-1.425,-1.41)); +#80871 = LINE('',#80872,#80873); +#80872 = CARTESIAN_POINT('',(5.670735294118,-1.425,-0.732941176471)); +#80873 = VECTOR('',#80874,1.); +#80874 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80875 = ORIENTED_EDGE('',*,*,#80876,.F.); +#80876 = EDGE_CURVE('',#80877,#80869,#80879,.T.); +#80877 = VERTEX_POINT('',#80878); +#80878 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#80879 = LINE('',#80880,#80881); +#80880 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#80881 = VECTOR('',#80882,1.); +#80882 = DIRECTION('',(0.,0.,-1.)); +#80883 = ORIENTED_EDGE('',*,*,#80884,.F.); +#80884 = EDGE_CURVE('',#80843,#80877,#80885,.T.); +#80885 = LINE('',#80886,#80887); +#80886 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80887 = VECTOR('',#80888,1.); +#80888 = DIRECTION('',(-1.,0.,0.)); +#80889 = PLANE('',#80890); +#80890 = AXIS2_PLACEMENT_3D('',#80891,#80892,#80893); +#80891 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80892 = DIRECTION('',(0.,1.,0.)); +#80893 = DIRECTION('',(-1.,0.,0.)); +#80894 = ADVANCED_FACE('',(#80895),#80920,.F.); +#80895 = FACE_BOUND('',#80896,.F.); +#80896 = EDGE_LOOP('',(#80897,#80907,#80913,#80914)); +#80897 = ORIENTED_EDGE('',*,*,#80898,.T.); +#80898 = EDGE_CURVE('',#80899,#80901,#80903,.T.); +#80899 = VERTEX_POINT('',#80900); +#80900 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80901 = VERTEX_POINT('',#80902); +#80902 = CARTESIAN_POINT('',(6.06,-1.275,-1.41)); +#80903 = LINE('',#80904,#80905); +#80904 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80905 = VECTOR('',#80906,1.); +#80906 = DIRECTION('',(0.,0.,-1.)); +#80907 = ORIENTED_EDGE('',*,*,#80908,.T.); +#80908 = EDGE_CURVE('',#80901,#80845,#80909,.T.); +#80909 = LINE('',#80910,#80911); +#80910 = CARTESIAN_POINT('',(6.06,-1.275,-1.41)); +#80911 = VECTOR('',#80912,1.); +#80912 = DIRECTION('',(0.,-1.,0.)); +#80913 = ORIENTED_EDGE('',*,*,#80842,.F.); +#80914 = ORIENTED_EDGE('',*,*,#80915,.F.); +#80915 = EDGE_CURVE('',#80899,#80843,#80916,.T.); +#80916 = LINE('',#80917,#80918); +#80917 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80918 = VECTOR('',#80919,1.); +#80919 = DIRECTION('',(0.,-1.,0.)); +#80920 = PLANE('',#80921); +#80921 = AXIS2_PLACEMENT_3D('',#80922,#80923,#80924); +#80922 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80923 = DIRECTION('',(-1.,-0.,-0.)); +#80924 = DIRECTION('',(0.,-1.,0.)); +#80925 = ADVANCED_FACE('',(#80926),#80944,.T.); +#80926 = FACE_BOUND('',#80927,.T.); +#80927 = EDGE_LOOP('',(#80928,#80936,#80937,#80938)); +#80928 = ORIENTED_EDGE('',*,*,#80929,.F.); +#80929 = EDGE_CURVE('',#80901,#80930,#80932,.T.); +#80930 = VERTEX_POINT('',#80931); +#80931 = CARTESIAN_POINT('',(6.01,-1.275,-1.61)); +#80932 = LINE('',#80933,#80934); +#80933 = CARTESIAN_POINT('',(6.229264705882,-1.275,-0.732941176471)); +#80934 = VECTOR('',#80935,1.); +#80935 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80936 = ORIENTED_EDGE('',*,*,#80908,.T.); +#80937 = ORIENTED_EDGE('',*,*,#80852,.T.); +#80938 = ORIENTED_EDGE('',*,*,#80939,.F.); +#80939 = EDGE_CURVE('',#80930,#80853,#80940,.T.); +#80940 = LINE('',#80941,#80942); +#80941 = CARTESIAN_POINT('',(6.01,-1.275,-1.61)); +#80942 = VECTOR('',#80943,1.); +#80943 = DIRECTION('',(0.,-1.,0.)); +#80944 = PLANE('',#80945); +#80945 = AXIS2_PLACEMENT_3D('',#80946,#80947,#80948); +#80946 = CARTESIAN_POINT('',(6.035,-1.275,-1.51)); +#80947 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80948 = DIRECTION('',(0.,-1.,0.)); +#80949 = ADVANCED_FACE('',(#80950),#80968,.T.); +#80950 = FACE_BOUND('',#80951,.F.); +#80951 = EDGE_LOOP('',(#80952,#80953,#80961,#80967)); +#80952 = ORIENTED_EDGE('',*,*,#80884,.T.); +#80953 = ORIENTED_EDGE('',*,*,#80954,.T.); +#80954 = EDGE_CURVE('',#80877,#80955,#80957,.T.); +#80955 = VERTEX_POINT('',#80956); +#80956 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#80957 = LINE('',#80958,#80959); +#80958 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#80959 = VECTOR('',#80960,1.); +#80960 = DIRECTION('',(0.,1.,0.)); +#80961 = ORIENTED_EDGE('',*,*,#80962,.T.); +#80962 = EDGE_CURVE('',#80955,#80899,#80963,.T.); +#80963 = LINE('',#80964,#80965); +#80964 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#80965 = VECTOR('',#80966,1.); +#80966 = DIRECTION('',(1.,0.,0.)); +#80967 = ORIENTED_EDGE('',*,*,#80915,.T.); +#80968 = PLANE('',#80969); +#80969 = AXIS2_PLACEMENT_3D('',#80970,#80971,#80972); +#80970 = CARTESIAN_POINT('',(5.95,-1.35,0.19)); +#80971 = DIRECTION('',(0.,0.,1.)); +#80972 = DIRECTION('',(1.,0.,-0.)); +#80973 = ADVANCED_FACE('',(#80974),#80992,.F.); +#80974 = FACE_BOUND('',#80975,.F.); +#80975 = EDGE_LOOP('',(#80976,#80977,#80978,#80986)); +#80976 = ORIENTED_EDGE('',*,*,#80860,.F.); +#80977 = ORIENTED_EDGE('',*,*,#80939,.F.); +#80978 = ORIENTED_EDGE('',*,*,#80979,.F.); +#80979 = EDGE_CURVE('',#80980,#80930,#80982,.T.); +#80980 = VERTEX_POINT('',#80981); +#80981 = CARTESIAN_POINT('',(5.89,-1.275,-1.61)); +#80982 = LINE('',#80983,#80984); +#80983 = CARTESIAN_POINT('',(5.84,-1.275,-1.61)); +#80984 = VECTOR('',#80985,1.); +#80985 = DIRECTION('',(1.,0.,0.)); +#80986 = ORIENTED_EDGE('',*,*,#80987,.F.); +#80987 = EDGE_CURVE('',#80861,#80980,#80988,.T.); +#80988 = LINE('',#80989,#80990); +#80989 = CARTESIAN_POINT('',(5.89,-1.425,-1.61)); +#80990 = VECTOR('',#80991,1.); +#80991 = DIRECTION('',(0.,1.,0.)); +#80992 = PLANE('',#80993); +#80993 = AXIS2_PLACEMENT_3D('',#80994,#80995,#80996); +#80994 = CARTESIAN_POINT('',(5.95,-1.35,-1.61)); +#80995 = DIRECTION('',(0.,0.,1.)); +#80996 = DIRECTION('',(1.,0.,-0.)); +#80997 = ADVANCED_FACE('',(#80998),#81016,.F.); +#80998 = FACE_BOUND('',#80999,.F.); +#80999 = EDGE_LOOP('',(#81000,#81001,#81009,#81015)); +#81000 = ORIENTED_EDGE('',*,*,#80876,.T.); +#81001 = ORIENTED_EDGE('',*,*,#81002,.T.); +#81002 = EDGE_CURVE('',#80869,#81003,#81005,.T.); +#81003 = VERTEX_POINT('',#81004); +#81004 = CARTESIAN_POINT('',(5.84,-1.275,-1.41)); +#81005 = LINE('',#81006,#81007); +#81006 = CARTESIAN_POINT('',(5.84,-1.425,-1.41)); +#81007 = VECTOR('',#81008,1.); +#81008 = DIRECTION('',(0.,1.,0.)); +#81009 = ORIENTED_EDGE('',*,*,#81010,.F.); +#81010 = EDGE_CURVE('',#80955,#81003,#81011,.T.); +#81011 = LINE('',#81012,#81013); +#81012 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#81013 = VECTOR('',#81014,1.); +#81014 = DIRECTION('',(0.,0.,-1.)); +#81015 = ORIENTED_EDGE('',*,*,#80954,.F.); +#81016 = PLANE('',#81017); +#81017 = AXIS2_PLACEMENT_3D('',#81018,#81019,#81020); +#81018 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#81019 = DIRECTION('',(1.,0.,0.)); +#81020 = DIRECTION('',(-0.,1.,0.)); +#81021 = ADVANCED_FACE('',(#81022),#81033,.T.); +#81022 = FACE_BOUND('',#81023,.T.); +#81023 = EDGE_LOOP('',(#81024,#81025,#81026,#81032)); +#81024 = ORIENTED_EDGE('',*,*,#80868,.F.); +#81025 = ORIENTED_EDGE('',*,*,#81002,.T.); +#81026 = ORIENTED_EDGE('',*,*,#81027,.T.); +#81027 = EDGE_CURVE('',#81003,#80980,#81028,.T.); +#81028 = LINE('',#81029,#81030); +#81029 = CARTESIAN_POINT('',(5.664264705882,-1.275,-0.707058823529)); +#81030 = VECTOR('',#81031,1.); +#81031 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#81032 = ORIENTED_EDGE('',*,*,#80987,.F.); +#81033 = PLANE('',#81034); +#81034 = AXIS2_PLACEMENT_3D('',#81035,#81036,#81037); +#81035 = CARTESIAN_POINT('',(5.865,-1.425,-1.51)); +#81036 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#81037 = DIRECTION('',(0.,1.,0.)); +#81038 = ADVANCED_FACE('',(#81039),#81047,.F.); +#81039 = FACE_BOUND('',#81040,.F.); +#81040 = EDGE_LOOP('',(#81041,#81042,#81043,#81044,#81045,#81046)); +#81041 = ORIENTED_EDGE('',*,*,#81010,.T.); +#81042 = ORIENTED_EDGE('',*,*,#81027,.T.); +#81043 = ORIENTED_EDGE('',*,*,#80979,.T.); +#81044 = ORIENTED_EDGE('',*,*,#80929,.F.); +#81045 = ORIENTED_EDGE('',*,*,#80898,.F.); +#81046 = ORIENTED_EDGE('',*,*,#80962,.F.); +#81047 = PLANE('',#81048); +#81048 = AXIS2_PLACEMENT_3D('',#81049,#81050,#81051); +#81049 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#81050 = DIRECTION('',(0.,-1.,0.)); +#81051 = DIRECTION('',(1.,0.,0.)); +#81052 = MANIFOLD_SOLID_BREP('',#81053); +#81053 = CLOSED_SHELL('',(#81054,#81110,#81141,#81165,#81189,#81213, + #81237,#81254)); +#81054 = ADVANCED_FACE('',(#81055),#81105,.F.); +#81055 = FACE_BOUND('',#81056,.F.); +#81056 = EDGE_LOOP('',(#81057,#81067,#81075,#81083,#81091,#81099)); +#81057 = ORIENTED_EDGE('',*,*,#81058,.T.); +#81058 = EDGE_CURVE('',#81059,#81061,#81063,.T.); +#81059 = VERTEX_POINT('',#81060); +#81060 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81061 = VERTEX_POINT('',#81062); +#81062 = CARTESIAN_POINT('',(6.06,-7.5E-02,-1.41)); +#81063 = LINE('',#81064,#81065); +#81064 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81065 = VECTOR('',#81066,1.); +#81066 = DIRECTION('',(0.,0.,-1.)); +#81067 = ORIENTED_EDGE('',*,*,#81068,.T.); +#81068 = EDGE_CURVE('',#81061,#81069,#81071,.T.); +#81069 = VERTEX_POINT('',#81070); +#81070 = CARTESIAN_POINT('',(6.01,-7.5E-02,-1.61)); +#81071 = LINE('',#81072,#81073); +#81072 = CARTESIAN_POINT('',(6.235735294118,-7.5E-02,-0.707058823529)); +#81073 = VECTOR('',#81074,1.); +#81074 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#81075 = ORIENTED_EDGE('',*,*,#81076,.T.); +#81076 = EDGE_CURVE('',#81069,#81077,#81079,.T.); +#81077 = VERTEX_POINT('',#81078); +#81078 = CARTESIAN_POINT('',(5.89,-7.5E-02,-1.61)); +#81079 = LINE('',#81080,#81081); +#81080 = CARTESIAN_POINT('',(6.06,-7.5E-02,-1.61)); +#81081 = VECTOR('',#81082,1.); +#81082 = DIRECTION('',(-1.,0.,0.)); +#81083 = ORIENTED_EDGE('',*,*,#81084,.F.); +#81084 = EDGE_CURVE('',#81085,#81077,#81087,.T.); +#81085 = VERTEX_POINT('',#81086); +#81086 = CARTESIAN_POINT('',(5.84,-7.5E-02,-1.41)); +#81087 = LINE('',#81088,#81089); +#81088 = CARTESIAN_POINT('',(5.670735294118,-7.5E-02,-0.732941176471)); +#81089 = VECTOR('',#81090,1.); +#81090 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#81091 = ORIENTED_EDGE('',*,*,#81092,.F.); +#81092 = EDGE_CURVE('',#81093,#81085,#81095,.T.); +#81093 = VERTEX_POINT('',#81094); +#81094 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81095 = LINE('',#81096,#81097); +#81096 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81097 = VECTOR('',#81098,1.); +#81098 = DIRECTION('',(0.,0.,-1.)); +#81099 = ORIENTED_EDGE('',*,*,#81100,.F.); +#81100 = EDGE_CURVE('',#81059,#81093,#81101,.T.); +#81101 = LINE('',#81102,#81103); +#81102 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81103 = VECTOR('',#81104,1.); +#81104 = DIRECTION('',(-1.,0.,0.)); +#81105 = PLANE('',#81106); +#81106 = AXIS2_PLACEMENT_3D('',#81107,#81108,#81109); +#81107 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81108 = DIRECTION('',(0.,1.,0.)); +#81109 = DIRECTION('',(-1.,0.,0.)); +#81110 = ADVANCED_FACE('',(#81111),#81136,.F.); +#81111 = FACE_BOUND('',#81112,.F.); +#81112 = EDGE_LOOP('',(#81113,#81123,#81129,#81130)); +#81113 = ORIENTED_EDGE('',*,*,#81114,.T.); +#81114 = EDGE_CURVE('',#81115,#81117,#81119,.T.); +#81115 = VERTEX_POINT('',#81116); +#81116 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81117 = VERTEX_POINT('',#81118); +#81118 = CARTESIAN_POINT('',(6.06,7.5E-02,-1.41)); +#81119 = LINE('',#81120,#81121); +#81120 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81121 = VECTOR('',#81122,1.); +#81122 = DIRECTION('',(0.,0.,-1.)); +#81123 = ORIENTED_EDGE('',*,*,#81124,.T.); +#81124 = EDGE_CURVE('',#81117,#81061,#81125,.T.); +#81125 = LINE('',#81126,#81127); +#81126 = CARTESIAN_POINT('',(6.06,7.5E-02,-1.41)); +#81127 = VECTOR('',#81128,1.); +#81128 = DIRECTION('',(0.,-1.,0.)); +#81129 = ORIENTED_EDGE('',*,*,#81058,.F.); +#81130 = ORIENTED_EDGE('',*,*,#81131,.F.); +#81131 = EDGE_CURVE('',#81115,#81059,#81132,.T.); +#81132 = LINE('',#81133,#81134); +#81133 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81134 = VECTOR('',#81135,1.); +#81135 = DIRECTION('',(0.,-1.,0.)); +#81136 = PLANE('',#81137); +#81137 = AXIS2_PLACEMENT_3D('',#81138,#81139,#81140); +#81138 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81139 = DIRECTION('',(-1.,-0.,-0.)); +#81140 = DIRECTION('',(0.,-1.,0.)); +#81141 = ADVANCED_FACE('',(#81142),#81160,.T.); +#81142 = FACE_BOUND('',#81143,.T.); +#81143 = EDGE_LOOP('',(#81144,#81152,#81153,#81154)); +#81144 = ORIENTED_EDGE('',*,*,#81145,.F.); +#81145 = EDGE_CURVE('',#81117,#81146,#81148,.T.); +#81146 = VERTEX_POINT('',#81147); +#81147 = CARTESIAN_POINT('',(6.01,7.5E-02,-1.61)); +#81148 = LINE('',#81149,#81150); +#81149 = CARTESIAN_POINT('',(6.229264705882,7.5E-02,-0.732941176471)); +#81150 = VECTOR('',#81151,1.); +#81151 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#81152 = ORIENTED_EDGE('',*,*,#81124,.T.); +#81153 = ORIENTED_EDGE('',*,*,#81068,.T.); +#81154 = ORIENTED_EDGE('',*,*,#81155,.F.); +#81155 = EDGE_CURVE('',#81146,#81069,#81156,.T.); +#81156 = LINE('',#81157,#81158); +#81157 = CARTESIAN_POINT('',(6.01,7.5E-02,-1.61)); +#81158 = VECTOR('',#81159,1.); +#81159 = DIRECTION('',(0.,-1.,0.)); +#81160 = PLANE('',#81161); +#81161 = AXIS2_PLACEMENT_3D('',#81162,#81163,#81164); +#81162 = CARTESIAN_POINT('',(6.035,7.5E-02,-1.51)); +#81163 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#81164 = DIRECTION('',(0.,-1.,0.)); +#81165 = ADVANCED_FACE('',(#81166),#81184,.T.); +#81166 = FACE_BOUND('',#81167,.F.); +#81167 = EDGE_LOOP('',(#81168,#81169,#81177,#81183)); +#81168 = ORIENTED_EDGE('',*,*,#81100,.T.); +#81169 = ORIENTED_EDGE('',*,*,#81170,.T.); +#81170 = EDGE_CURVE('',#81093,#81171,#81173,.T.); +#81171 = VERTEX_POINT('',#81172); +#81172 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81173 = LINE('',#81174,#81175); +#81174 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81175 = VECTOR('',#81176,1.); +#81176 = DIRECTION('',(0.,1.,0.)); +#81177 = ORIENTED_EDGE('',*,*,#81178,.T.); +#81178 = EDGE_CURVE('',#81171,#81115,#81179,.T.); +#81179 = LINE('',#81180,#81181); +#81180 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81181 = VECTOR('',#81182,1.); +#81182 = DIRECTION('',(1.,0.,0.)); +#81183 = ORIENTED_EDGE('',*,*,#81131,.T.); +#81184 = PLANE('',#81185); +#81185 = AXIS2_PLACEMENT_3D('',#81186,#81187,#81188); +#81186 = CARTESIAN_POINT('',(5.95,0.,0.19)); +#81187 = DIRECTION('',(0.,0.,1.)); +#81188 = DIRECTION('',(1.,0.,-0.)); +#81189 = ADVANCED_FACE('',(#81190),#81208,.F.); +#81190 = FACE_BOUND('',#81191,.F.); +#81191 = EDGE_LOOP('',(#81192,#81193,#81194,#81202)); +#81192 = ORIENTED_EDGE('',*,*,#81076,.F.); +#81193 = ORIENTED_EDGE('',*,*,#81155,.F.); +#81194 = ORIENTED_EDGE('',*,*,#81195,.F.); +#81195 = EDGE_CURVE('',#81196,#81146,#81198,.T.); +#81196 = VERTEX_POINT('',#81197); +#81197 = CARTESIAN_POINT('',(5.89,7.5E-02,-1.61)); +#81198 = LINE('',#81199,#81200); +#81199 = CARTESIAN_POINT('',(5.84,7.5E-02,-1.61)); +#81200 = VECTOR('',#81201,1.); +#81201 = DIRECTION('',(1.,0.,0.)); +#81202 = ORIENTED_EDGE('',*,*,#81203,.F.); +#81203 = EDGE_CURVE('',#81077,#81196,#81204,.T.); +#81204 = LINE('',#81205,#81206); +#81205 = CARTESIAN_POINT('',(5.89,-7.5E-02,-1.61)); +#81206 = VECTOR('',#81207,1.); +#81207 = DIRECTION('',(0.,1.,0.)); +#81208 = PLANE('',#81209); +#81209 = AXIS2_PLACEMENT_3D('',#81210,#81211,#81212); +#81210 = CARTESIAN_POINT('',(5.95,0.,-1.61)); +#81211 = DIRECTION('',(0.,0.,1.)); +#81212 = DIRECTION('',(1.,0.,-0.)); +#81213 = ADVANCED_FACE('',(#81214),#81232,.F.); +#81214 = FACE_BOUND('',#81215,.F.); +#81215 = EDGE_LOOP('',(#81216,#81217,#81225,#81231)); +#81216 = ORIENTED_EDGE('',*,*,#81092,.T.); +#81217 = ORIENTED_EDGE('',*,*,#81218,.T.); +#81218 = EDGE_CURVE('',#81085,#81219,#81221,.T.); +#81219 = VERTEX_POINT('',#81220); +#81220 = CARTESIAN_POINT('',(5.84,7.5E-02,-1.41)); +#81221 = LINE('',#81222,#81223); +#81222 = CARTESIAN_POINT('',(5.84,-7.5E-02,-1.41)); +#81223 = VECTOR('',#81224,1.); +#81224 = DIRECTION('',(0.,1.,0.)); +#81225 = ORIENTED_EDGE('',*,*,#81226,.F.); +#81226 = EDGE_CURVE('',#81171,#81219,#81227,.T.); +#81227 = LINE('',#81228,#81229); +#81228 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81229 = VECTOR('',#81230,1.); +#81230 = DIRECTION('',(0.,0.,-1.)); +#81231 = ORIENTED_EDGE('',*,*,#81170,.F.); +#81232 = PLANE('',#81233); +#81233 = AXIS2_PLACEMENT_3D('',#81234,#81235,#81236); +#81234 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81235 = DIRECTION('',(1.,0.,0.)); +#81236 = DIRECTION('',(-0.,1.,0.)); +#81237 = ADVANCED_FACE('',(#81238),#81249,.T.); +#81238 = FACE_BOUND('',#81239,.T.); +#81239 = EDGE_LOOP('',(#81240,#81241,#81242,#81248)); +#81240 = ORIENTED_EDGE('',*,*,#81084,.F.); +#81241 = ORIENTED_EDGE('',*,*,#81218,.T.); +#81242 = ORIENTED_EDGE('',*,*,#81243,.T.); +#81243 = EDGE_CURVE('',#81219,#81196,#81244,.T.); +#81244 = LINE('',#81245,#81246); +#81245 = CARTESIAN_POINT('',(5.664264705882,7.5E-02,-0.707058823529)); +#81246 = VECTOR('',#81247,1.); +#81247 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#81248 = ORIENTED_EDGE('',*,*,#81203,.F.); +#81249 = PLANE('',#81250); +#81250 = AXIS2_PLACEMENT_3D('',#81251,#81252,#81253); +#81251 = CARTESIAN_POINT('',(5.865,-7.5E-02,-1.51)); +#81252 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#81253 = DIRECTION('',(0.,1.,0.)); +#81254 = ADVANCED_FACE('',(#81255),#81263,.F.); +#81255 = FACE_BOUND('',#81256,.F.); +#81256 = EDGE_LOOP('',(#81257,#81258,#81259,#81260,#81261,#81262)); +#81257 = ORIENTED_EDGE('',*,*,#81226,.T.); +#81258 = ORIENTED_EDGE('',*,*,#81243,.T.); +#81259 = ORIENTED_EDGE('',*,*,#81195,.T.); +#81260 = ORIENTED_EDGE('',*,*,#81145,.F.); +#81261 = ORIENTED_EDGE('',*,*,#81114,.F.); +#81262 = ORIENTED_EDGE('',*,*,#81178,.F.); +#81263 = PLANE('',#81264); +#81264 = AXIS2_PLACEMENT_3D('',#81265,#81266,#81267); +#81265 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81266 = DIRECTION('',(0.,-1.,0.)); +#81267 = DIRECTION('',(1.,0.,0.)); +#81268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#81272)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#81269,#81270,#81271)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#81269 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#81270 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#81271 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#81272 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#81269, + 'distance_accuracy_value','confusion accuracy'); +#81273 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#81274,#81276); +#81274 = ( REPRESENTATION_RELATIONSHIP('','',#66662,#66639) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#81275) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#81275 = ITEM_DEFINED_TRANSFORMATION('','',#11,#66640); +#81276 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #81277); +#81277 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('91','=>[0:1:1:41]','',#66634, + #66657,$); +#81278 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#66659)); +#81279 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#81280,#81282); +#81280 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#81281) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#81281 = ITEM_DEFINED_TRANSFORMATION('','',#11,#303); +#81282 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #81283); +#81283 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('93','Q4','',#5,#36156,$); +#81284 = SHAPE_DEFINITION_REPRESENTATION(#81285,#81291); +#81285 = PRODUCT_DEFINITION_SHAPE('','',#81286); +#81286 = PRODUCT_DEFINITION('design','',#81287,#81290); +#81287 = PRODUCT_DEFINITION_FORMATION('','',#81288); +#81288 = PRODUCT( + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal', + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal','',(#81289) + ); +#81289 = PRODUCT_CONTEXT('',#2,'mechanical'); +#81290 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#81291 = SHAPE_REPRESENTATION('',(#11,#81292),#81296); +#81292 = AXIS2_PLACEMENT_3D('',#81293,#81294,#81295); +#81293 = CARTESIAN_POINT('',(0.,0.,0.)); +#81294 = DIRECTION('',(0.,0.,1.)); +#81295 = DIRECTION('',(1.,0.,-0.)); +#81296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#81300)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#81297,#81298,#81299)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#81297 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#81298 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#81299 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#81300 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#81297, + 'distance_accuracy_value','confusion accuracy'); +#81301 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#81302,#81304); +#81302 = ( REPRESENTATION_RELATIONSHIP('','',#81291,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#81303) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#81303 = ITEM_DEFINED_TRANSFORMATION('','',#11,#307); +#81304 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #81305); +#81305 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('95','P1','',#5,#81286,$); +#81306 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#81288)); +#81307 = SHAPE_DEFINITION_REPRESENTATION(#81308,#81314); +#81308 = PRODUCT_DEFINITION_SHAPE('','',#81309); +#81309 = PRODUCT_DEFINITION('design','',#81310,#81313); +#81310 = PRODUCT_DEFINITION_FORMATION('','',#81311); +#81311 = PRODUCT( + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal', + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal','',(#81312) + ); +#81312 = PRODUCT_CONTEXT('',#2,'mechanical'); +#81313 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#81314 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#81315),#87098); +#81315 = MANIFOLD_SOLID_BREP('',#81316); +#81316 = CLOSED_SHELL('',(#81317,#81591,#81669,#81863,#81887,#81958, + #81982,#82006,#82023,#82047,#82064,#82081,#82112,#82136,#82160, + #82177,#82208,#82232,#82256,#82273,#82304,#82328,#82352,#82369, + #82400,#82424,#82448,#82465,#82496,#82520,#82544,#82561,#82583, + #82655,#82667,#82679,#82691,#82720,#82743,#82766,#82783,#82812, + #82835,#82858,#82875,#82904,#82927,#82950,#82967,#82996,#83019, + #83042,#83059,#83088,#83111,#83134,#83151,#83163,#83175,#83187, + #83199,#83211,#83223,#83334,#83445,#83556,#83667,#83778,#83809, + #83833,#83857,#83881,#83912,#83936,#83960,#83984,#84015,#84039, + #84063,#84087,#84118,#84142,#84166,#84190,#84221,#84245,#84269, + #84293,#84309,#84342,#84367,#84399,#84430,#84440,#84458,#84474, + #84507,#84532,#84564,#84595,#84605,#84623,#84639,#84672,#84697, + #84729,#84760,#84770,#84788,#84804,#84837,#84862,#84894,#84925, + #84935,#84953,#84969,#85002,#85027,#85059,#85090,#85100,#85118, + #85173,#85228,#85283,#85338,#85393,#85418,#85529,#85539,#85564, + #85675,#85685,#85710,#85821,#85831,#85856,#85967,#85977,#86002, + #86113,#86123,#86133,#86164,#86188,#86212,#86229,#86239,#86270, + #86294,#86318,#86335,#86345,#86376,#86400,#86424,#86441,#86451, + #86482,#86506,#86530,#86547,#86557,#86588,#86612,#86636,#86653, + #86669,#86686,#86703,#86720,#86730,#86746,#86763,#86780,#86797, + #86807,#86823,#86840,#86857,#86874,#86884,#86900,#86917,#86934, + #86951,#86961,#86977,#86994,#87011,#87028,#87038,#87050,#87062, + #87074,#87086)); +#81317 = ADVANCED_FACE('',(#81318,#81416,#81450,#81484,#81518,#81552), + #81586,.F.); +#81318 = FACE_BOUND('',#81319,.F.); +#81319 = EDGE_LOOP('',(#81320,#81330,#81338,#81346,#81354,#81362,#81370, + #81378,#81386,#81394,#81402,#81410)); +#81320 = ORIENTED_EDGE('',*,*,#81321,.F.); +#81321 = EDGE_CURVE('',#81322,#81324,#81326,.T.); +#81322 = VERTEX_POINT('',#81323); +#81323 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81324 = VERTEX_POINT('',#81325); +#81325 = CARTESIAN_POINT('',(-2.5,-3.83,0.)); +#81326 = LINE('',#81327,#81328); +#81327 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81328 = VECTOR('',#81329,1.); +#81329 = DIRECTION('',(0.,1.,0.)); +#81330 = ORIENTED_EDGE('',*,*,#81331,.T.); +#81331 = EDGE_CURVE('',#81322,#81332,#81334,.T.); +#81332 = VERTEX_POINT('',#81333); +#81333 = CARTESIAN_POINT('',(22.5,-4.6,0.)); +#81334 = LINE('',#81335,#81336); +#81335 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81336 = VECTOR('',#81337,1.); +#81337 = DIRECTION('',(1.,0.,0.)); +#81338 = ORIENTED_EDGE('',*,*,#81339,.T.); +#81339 = EDGE_CURVE('',#81332,#81340,#81342,.T.); +#81340 = VERTEX_POINT('',#81341); +#81341 = CARTESIAN_POINT('',(22.5,-3.83,0.)); +#81342 = LINE('',#81343,#81344); +#81343 = CARTESIAN_POINT('',(22.5,-4.6,0.)); +#81344 = VECTOR('',#81345,1.); +#81345 = DIRECTION('',(0.,1.,0.)); +#81346 = ORIENTED_EDGE('',*,*,#81347,.F.); +#81347 = EDGE_CURVE('',#81348,#81340,#81350,.T.); +#81348 = VERTEX_POINT('',#81349); +#81349 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#81350 = LINE('',#81351,#81352); +#81351 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#81352 = VECTOR('',#81353,1.); +#81353 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81354 = ORIENTED_EDGE('',*,*,#81355,.F.); +#81355 = EDGE_CURVE('',#81356,#81348,#81358,.T.); +#81356 = VERTEX_POINT('',#81357); +#81357 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#81358 = LINE('',#81359,#81360); +#81359 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#81360 = VECTOR('',#81361,1.); +#81361 = DIRECTION('',(0.,-1.,0.)); +#81362 = ORIENTED_EDGE('',*,*,#81363,.F.); +#81363 = EDGE_CURVE('',#81364,#81356,#81366,.T.); +#81364 = VERTEX_POINT('',#81365); +#81365 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#81366 = LINE('',#81367,#81368); +#81367 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#81368 = VECTOR('',#81369,1.); +#81369 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#81370 = ORIENTED_EDGE('',*,*,#81371,.T.); +#81371 = EDGE_CURVE('',#81364,#81372,#81374,.T.); +#81372 = VERTEX_POINT('',#81373); +#81373 = CARTESIAN_POINT('',(22.5,5.2,0.)); +#81374 = LINE('',#81375,#81376); +#81375 = CARTESIAN_POINT('',(22.5,-4.6,0.)); +#81376 = VECTOR('',#81377,1.); +#81377 = DIRECTION('',(0.,1.,0.)); +#81378 = ORIENTED_EDGE('',*,*,#81379,.F.); +#81379 = EDGE_CURVE('',#81380,#81372,#81382,.T.); +#81380 = VERTEX_POINT('',#81381); +#81381 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#81382 = LINE('',#81383,#81384); +#81383 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#81384 = VECTOR('',#81385,1.); +#81385 = DIRECTION('',(1.,0.,0.)); +#81386 = ORIENTED_EDGE('',*,*,#81387,.F.); +#81387 = EDGE_CURVE('',#81388,#81380,#81390,.T.); +#81388 = VERTEX_POINT('',#81389); +#81389 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#81390 = LINE('',#81391,#81392); +#81391 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81392 = VECTOR('',#81393,1.); +#81393 = DIRECTION('',(0.,1.,0.)); +#81394 = ORIENTED_EDGE('',*,*,#81395,.T.); +#81395 = EDGE_CURVE('',#81388,#81396,#81398,.T.); +#81396 = VERTEX_POINT('',#81397); +#81397 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81398 = LINE('',#81399,#81400); +#81399 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#81400 = VECTOR('',#81401,1.); +#81401 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#81402 = ORIENTED_EDGE('',*,*,#81403,.T.); +#81403 = EDGE_CURVE('',#81396,#81404,#81406,.T.); +#81404 = VERTEX_POINT('',#81405); +#81405 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81406 = LINE('',#81407,#81408); +#81407 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81408 = VECTOR('',#81409,1.); +#81409 = DIRECTION('',(0.,-1.,0.)); +#81410 = ORIENTED_EDGE('',*,*,#81411,.T.); +#81411 = EDGE_CURVE('',#81404,#81324,#81412,.T.); +#81412 = LINE('',#81413,#81414); +#81413 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81414 = VECTOR('',#81415,1.); +#81415 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81416 = FACE_BOUND('',#81417,.F.); +#81417 = EDGE_LOOP('',(#81418,#81428,#81436,#81444)); +#81418 = ORIENTED_EDGE('',*,*,#81419,.F.); +#81419 = EDGE_CURVE('',#81420,#81422,#81424,.T.); +#81420 = VERTEX_POINT('',#81421); +#81421 = CARTESIAN_POINT('',(19.55,-0.45,0.)); +#81422 = VERTEX_POINT('',#81423); +#81423 = CARTESIAN_POINT('',(20.45,-0.45,0.)); +#81424 = LINE('',#81425,#81426); +#81425 = CARTESIAN_POINT('',(8.525,-0.45,0.)); +#81426 = VECTOR('',#81427,1.); +#81427 = DIRECTION('',(1.,0.,-0.)); +#81428 = ORIENTED_EDGE('',*,*,#81429,.F.); +#81429 = EDGE_CURVE('',#81430,#81420,#81432,.T.); +#81430 = VERTEX_POINT('',#81431); +#81431 = CARTESIAN_POINT('',(19.55,0.45,0.)); +#81432 = LINE('',#81433,#81434); +#81433 = CARTESIAN_POINT('',(19.55,-2.075,0.)); +#81434 = VECTOR('',#81435,1.); +#81435 = DIRECTION('',(0.,-1.,0.)); +#81436 = ORIENTED_EDGE('',*,*,#81437,.F.); +#81437 = EDGE_CURVE('',#81438,#81430,#81440,.T.); +#81438 = VERTEX_POINT('',#81439); +#81439 = CARTESIAN_POINT('',(20.45,0.45,0.)); +#81440 = LINE('',#81441,#81442); +#81441 = CARTESIAN_POINT('',(8.975,0.45,0.)); +#81442 = VECTOR('',#81443,1.); +#81443 = DIRECTION('',(-1.,0.,0.)); +#81444 = ORIENTED_EDGE('',*,*,#81445,.F.); +#81445 = EDGE_CURVE('',#81422,#81438,#81446,.T.); +#81446 = LINE('',#81447,#81448); +#81447 = CARTESIAN_POINT('',(20.45,-2.525,0.)); +#81448 = VECTOR('',#81449,1.); +#81449 = DIRECTION('',(0.,1.,0.)); +#81450 = FACE_BOUND('',#81451,.F.); +#81451 = EDGE_LOOP('',(#81452,#81462,#81470,#81478)); +#81452 = ORIENTED_EDGE('',*,*,#81453,.F.); +#81453 = EDGE_CURVE('',#81454,#81456,#81458,.T.); +#81454 = VERTEX_POINT('',#81455); +#81455 = CARTESIAN_POINT('',(14.55,-0.45,0.)); +#81456 = VERTEX_POINT('',#81457); +#81457 = CARTESIAN_POINT('',(15.45,-0.45,0.)); +#81458 = LINE('',#81459,#81460); +#81459 = CARTESIAN_POINT('',(6.025,-0.45,0.)); +#81460 = VECTOR('',#81461,1.); +#81461 = DIRECTION('',(1.,0.,-0.)); +#81462 = ORIENTED_EDGE('',*,*,#81463,.F.); +#81463 = EDGE_CURVE('',#81464,#81454,#81466,.T.); +#81464 = VERTEX_POINT('',#81465); +#81465 = CARTESIAN_POINT('',(14.55,0.45,0.)); +#81466 = LINE('',#81467,#81468); +#81467 = CARTESIAN_POINT('',(14.55,-2.075,0.)); +#81468 = VECTOR('',#81469,1.); +#81469 = DIRECTION('',(0.,-1.,0.)); +#81470 = ORIENTED_EDGE('',*,*,#81471,.F.); +#81471 = EDGE_CURVE('',#81472,#81464,#81474,.T.); +#81472 = VERTEX_POINT('',#81473); +#81473 = CARTESIAN_POINT('',(15.45,0.45,0.)); +#81474 = LINE('',#81475,#81476); +#81475 = CARTESIAN_POINT('',(6.475,0.45,0.)); +#81476 = VECTOR('',#81477,1.); +#81477 = DIRECTION('',(-1.,0.,0.)); +#81478 = ORIENTED_EDGE('',*,*,#81479,.F.); +#81479 = EDGE_CURVE('',#81456,#81472,#81480,.T.); +#81480 = LINE('',#81481,#81482); +#81481 = CARTESIAN_POINT('',(15.45,-2.525,0.)); +#81482 = VECTOR('',#81483,1.); +#81483 = DIRECTION('',(0.,1.,0.)); +#81484 = FACE_BOUND('',#81485,.F.); +#81485 = EDGE_LOOP('',(#81486,#81496,#81504,#81512)); +#81486 = ORIENTED_EDGE('',*,*,#81487,.F.); +#81487 = EDGE_CURVE('',#81488,#81490,#81492,.T.); +#81488 = VERTEX_POINT('',#81489); +#81489 = CARTESIAN_POINT('',(9.55,-0.45,0.)); +#81490 = VERTEX_POINT('',#81491); +#81491 = CARTESIAN_POINT('',(10.45,-0.45,0.)); +#81492 = LINE('',#81493,#81494); +#81493 = CARTESIAN_POINT('',(3.525,-0.45,0.)); +#81494 = VECTOR('',#81495,1.); +#81495 = DIRECTION('',(1.,0.,-0.)); +#81496 = ORIENTED_EDGE('',*,*,#81497,.F.); +#81497 = EDGE_CURVE('',#81498,#81488,#81500,.T.); +#81498 = VERTEX_POINT('',#81499); +#81499 = CARTESIAN_POINT('',(9.55,0.45,0.)); +#81500 = LINE('',#81501,#81502); +#81501 = CARTESIAN_POINT('',(9.55,-2.075,0.)); +#81502 = VECTOR('',#81503,1.); +#81503 = DIRECTION('',(0.,-1.,0.)); +#81504 = ORIENTED_EDGE('',*,*,#81505,.F.); +#81505 = EDGE_CURVE('',#81506,#81498,#81508,.T.); +#81506 = VERTEX_POINT('',#81507); +#81507 = CARTESIAN_POINT('',(10.45,0.45,0.)); +#81508 = LINE('',#81509,#81510); +#81509 = CARTESIAN_POINT('',(3.975,0.45,0.)); +#81510 = VECTOR('',#81511,1.); +#81511 = DIRECTION('',(-1.,0.,0.)); +#81512 = ORIENTED_EDGE('',*,*,#81513,.F.); +#81513 = EDGE_CURVE('',#81490,#81506,#81514,.T.); +#81514 = LINE('',#81515,#81516); +#81515 = CARTESIAN_POINT('',(10.45,-2.525,0.)); +#81516 = VECTOR('',#81517,1.); +#81517 = DIRECTION('',(0.,1.,0.)); +#81518 = FACE_BOUND('',#81519,.F.); +#81519 = EDGE_LOOP('',(#81520,#81530,#81538,#81546)); +#81520 = ORIENTED_EDGE('',*,*,#81521,.F.); +#81521 = EDGE_CURVE('',#81522,#81524,#81526,.T.); +#81522 = VERTEX_POINT('',#81523); +#81523 = CARTESIAN_POINT('',(4.55,-0.45,0.)); +#81524 = VERTEX_POINT('',#81525); +#81525 = CARTESIAN_POINT('',(5.45,-0.45,0.)); +#81526 = LINE('',#81527,#81528); +#81527 = CARTESIAN_POINT('',(1.025,-0.45,0.)); +#81528 = VECTOR('',#81529,1.); +#81529 = DIRECTION('',(1.,0.,-0.)); +#81530 = ORIENTED_EDGE('',*,*,#81531,.F.); +#81531 = EDGE_CURVE('',#81532,#81522,#81534,.T.); +#81532 = VERTEX_POINT('',#81533); +#81533 = CARTESIAN_POINT('',(4.55,0.45,0.)); +#81534 = LINE('',#81535,#81536); +#81535 = CARTESIAN_POINT('',(4.55,-2.075,0.)); +#81536 = VECTOR('',#81537,1.); +#81537 = DIRECTION('',(0.,-1.,0.)); +#81538 = ORIENTED_EDGE('',*,*,#81539,.F.); +#81539 = EDGE_CURVE('',#81540,#81532,#81542,.T.); +#81540 = VERTEX_POINT('',#81541); +#81541 = CARTESIAN_POINT('',(5.45,0.45,0.)); +#81542 = LINE('',#81543,#81544); +#81543 = CARTESIAN_POINT('',(1.475,0.45,0.)); +#81544 = VECTOR('',#81545,1.); +#81545 = DIRECTION('',(-1.,0.,0.)); +#81546 = ORIENTED_EDGE('',*,*,#81547,.F.); +#81547 = EDGE_CURVE('',#81524,#81540,#81548,.T.); +#81548 = LINE('',#81549,#81550); +#81549 = CARTESIAN_POINT('',(5.45,-2.525,0.)); +#81550 = VECTOR('',#81551,1.); +#81551 = DIRECTION('',(0.,1.,0.)); +#81552 = FACE_BOUND('',#81553,.F.); +#81553 = EDGE_LOOP('',(#81554,#81564,#81572,#81580)); +#81554 = ORIENTED_EDGE('',*,*,#81555,.F.); +#81555 = EDGE_CURVE('',#81556,#81558,#81560,.T.); +#81556 = VERTEX_POINT('',#81557); +#81557 = CARTESIAN_POINT('',(-0.45,-0.45,0.)); +#81558 = VERTEX_POINT('',#81559); +#81559 = CARTESIAN_POINT('',(0.45,-0.45,0.)); +#81560 = LINE('',#81561,#81562); +#81561 = CARTESIAN_POINT('',(-1.475,-0.45,0.)); +#81562 = VECTOR('',#81563,1.); +#81563 = DIRECTION('',(1.,0.,-0.)); +#81564 = ORIENTED_EDGE('',*,*,#81565,.F.); +#81565 = EDGE_CURVE('',#81566,#81556,#81568,.T.); +#81566 = VERTEX_POINT('',#81567); +#81567 = CARTESIAN_POINT('',(-0.45,0.45,0.)); +#81568 = LINE('',#81569,#81570); +#81569 = CARTESIAN_POINT('',(-0.45,-2.075,0.)); +#81570 = VECTOR('',#81571,1.); +#81571 = DIRECTION('',(0.,-1.,0.)); +#81572 = ORIENTED_EDGE('',*,*,#81573,.F.); +#81573 = EDGE_CURVE('',#81574,#81566,#81576,.T.); +#81574 = VERTEX_POINT('',#81575); +#81575 = CARTESIAN_POINT('',(0.45,0.45,0.)); +#81576 = LINE('',#81577,#81578); +#81577 = CARTESIAN_POINT('',(-1.025,0.45,0.)); +#81578 = VECTOR('',#81579,1.); +#81579 = DIRECTION('',(-1.,0.,0.)); +#81580 = ORIENTED_EDGE('',*,*,#81581,.F.); +#81581 = EDGE_CURVE('',#81558,#81574,#81582,.T.); +#81582 = LINE('',#81583,#81584); +#81583 = CARTESIAN_POINT('',(0.45,-2.525,0.)); +#81584 = VECTOR('',#81585,1.); +#81585 = DIRECTION('',(0.,1.,0.)); +#81586 = PLANE('',#81587); +#81587 = AXIS2_PLACEMENT_3D('',#81588,#81589,#81590); +#81588 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81589 = DIRECTION('',(0.,0.,1.)); +#81590 = DIRECTION('',(0.,1.,0.)); +#81591 = ADVANCED_FACE('',(#81592),#81664,.F.); +#81592 = FACE_BOUND('',#81593,.F.); +#81593 = EDGE_LOOP('',(#81594,#81604,#81612,#81618,#81619,#81627,#81635, + #81641,#81642,#81650,#81658)); +#81594 = ORIENTED_EDGE('',*,*,#81595,.T.); +#81595 = EDGE_CURVE('',#81596,#81598,#81600,.T.); +#81596 = VERTEX_POINT('',#81597); +#81597 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#81598 = VERTEX_POINT('',#81599); +#81599 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#81600 = LINE('',#81601,#81602); +#81601 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#81602 = VECTOR('',#81603,1.); +#81603 = DIRECTION('',(0.,-0.228191322789,-0.973616310568)); +#81604 = ORIENTED_EDGE('',*,*,#81605,.T.); +#81605 = EDGE_CURVE('',#81598,#81606,#81608,.T.); +#81606 = VERTEX_POINT('',#81607); +#81607 = CARTESIAN_POINT('',(-2.5,-4.6,7.4)); +#81608 = LINE('',#81609,#81610); +#81609 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#81610 = VECTOR('',#81611,1.); +#81611 = DIRECTION('',(0.,-1.,0.)); +#81612 = ORIENTED_EDGE('',*,*,#81613,.T.); +#81613 = EDGE_CURVE('',#81606,#81322,#81614,.T.); +#81614 = LINE('',#81615,#81616); +#81615 = CARTESIAN_POINT('',(-2.5,-4.6,13.8)); +#81616 = VECTOR('',#81617,1.); +#81617 = DIRECTION('',(0.,0.,-1.)); +#81618 = ORIENTED_EDGE('',*,*,#81321,.T.); +#81619 = ORIENTED_EDGE('',*,*,#81620,.T.); +#81620 = EDGE_CURVE('',#81324,#81621,#81623,.T.); +#81621 = VERTEX_POINT('',#81622); +#81622 = CARTESIAN_POINT('',(-2.5,-3.83,7.)); +#81623 = LINE('',#81624,#81625); +#81624 = CARTESIAN_POINT('',(-2.5,-3.83,0.)); +#81625 = VECTOR('',#81626,1.); +#81626 = DIRECTION('',(0.,0.,1.)); +#81627 = ORIENTED_EDGE('',*,*,#81628,.T.); +#81628 = EDGE_CURVE('',#81621,#81629,#81631,.T.); +#81629 = VERTEX_POINT('',#81630); +#81630 = CARTESIAN_POINT('',(-2.5,-3.37,7.)); +#81631 = LINE('',#81632,#81633); +#81632 = CARTESIAN_POINT('',(-2.5,-3.83,7.)); +#81633 = VECTOR('',#81634,1.); +#81634 = DIRECTION('',(0.,1.,0.)); +#81635 = ORIENTED_EDGE('',*,*,#81636,.F.); +#81636 = EDGE_CURVE('',#81388,#81629,#81637,.T.); +#81637 = LINE('',#81638,#81639); +#81638 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#81639 = VECTOR('',#81640,1.); +#81640 = DIRECTION('',(0.,0.,1.)); +#81641 = ORIENTED_EDGE('',*,*,#81387,.T.); +#81642 = ORIENTED_EDGE('',*,*,#81643,.T.); +#81643 = EDGE_CURVE('',#81380,#81644,#81646,.T.); +#81644 = VERTEX_POINT('',#81645); +#81645 = CARTESIAN_POINT('',(-2.5,5.2,4.57)); +#81646 = LINE('',#81647,#81648); +#81647 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#81648 = VECTOR('',#81649,1.); +#81649 = DIRECTION('',(0.,0.,1.)); +#81650 = ORIENTED_EDGE('',*,*,#81651,.F.); +#81651 = EDGE_CURVE('',#81652,#81644,#81654,.T.); +#81652 = VERTEX_POINT('',#81653); +#81653 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#81654 = LINE('',#81655,#81656); +#81655 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#81656 = VECTOR('',#81657,1.); +#81657 = DIRECTION('',(0.,0.309109370483,-0.951026496518)); +#81658 = ORIENTED_EDGE('',*,*,#81659,.T.); +#81659 = EDGE_CURVE('',#81652,#81596,#81660,.T.); +#81660 = LINE('',#81661,#81662); +#81661 = CARTESIAN_POINT('',(-2.5,5.2,13.8)); +#81662 = VECTOR('',#81663,1.); +#81663 = DIRECTION('',(0.,-1.,0.)); +#81664 = PLANE('',#81665); +#81665 = AXIS2_PLACEMENT_3D('',#81666,#81667,#81668); +#81666 = CARTESIAN_POINT('',(-2.5,0.3,6.9)); +#81667 = DIRECTION('',(1.,0.,0.)); +#81668 = DIRECTION('',(-0.,0.,1.)); +#81669 = ADVANCED_FACE('',(#81670,#81688,#81722,#81756,#81790,#81824), + #81858,.F.); +#81670 = FACE_BOUND('',#81671,.F.); +#81671 = EDGE_LOOP('',(#81672,#81673,#81681,#81687)); +#81672 = ORIENTED_EDGE('',*,*,#81613,.F.); +#81673 = ORIENTED_EDGE('',*,*,#81674,.T.); +#81674 = EDGE_CURVE('',#81606,#81675,#81677,.T.); +#81675 = VERTEX_POINT('',#81676); +#81676 = CARTESIAN_POINT('',(22.5,-4.6,7.4)); +#81677 = LINE('',#81678,#81679); +#81678 = CARTESIAN_POINT('',(-2.5,-4.6,7.4)); +#81679 = VECTOR('',#81680,1.); +#81680 = DIRECTION('',(1.,0.,0.)); +#81681 = ORIENTED_EDGE('',*,*,#81682,.T.); +#81682 = EDGE_CURVE('',#81675,#81332,#81683,.T.); +#81683 = LINE('',#81684,#81685); +#81684 = CARTESIAN_POINT('',(22.5,-4.6,13.8)); +#81685 = VECTOR('',#81686,1.); +#81686 = DIRECTION('',(0.,0.,-1.)); +#81687 = ORIENTED_EDGE('',*,*,#81331,.F.); +#81688 = FACE_BOUND('',#81689,.F.); +#81689 = EDGE_LOOP('',(#81690,#81700,#81708,#81716)); +#81690 = ORIENTED_EDGE('',*,*,#81691,.F.); +#81691 = EDGE_CURVE('',#81692,#81694,#81696,.T.); +#81692 = VERTEX_POINT('',#81693); +#81693 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#81694 = VERTEX_POINT('',#81695); +#81695 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#81696 = LINE('',#81697,#81698); +#81697 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#81698 = VECTOR('',#81699,1.); +#81699 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81700 = ORIENTED_EDGE('',*,*,#81701,.F.); +#81701 = EDGE_CURVE('',#81702,#81692,#81704,.T.); +#81702 = VERTEX_POINT('',#81703); +#81703 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#81704 = LINE('',#81705,#81706); +#81705 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#81706 = VECTOR('',#81707,1.); +#81707 = DIRECTION('',(0.,0.,-1.)); +#81708 = ORIENTED_EDGE('',*,*,#81709,.F.); +#81709 = EDGE_CURVE('',#81710,#81702,#81712,.T.); +#81710 = VERTEX_POINT('',#81711); +#81711 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#81712 = LINE('',#81713,#81714); +#81713 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#81714 = VECTOR('',#81715,1.); +#81715 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81716 = ORIENTED_EDGE('',*,*,#81717,.F.); +#81717 = EDGE_CURVE('',#81694,#81710,#81718,.T.); +#81718 = LINE('',#81719,#81720); +#81719 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#81720 = VECTOR('',#81721,1.); +#81721 = DIRECTION('',(0.,0.,1.)); +#81722 = FACE_BOUND('',#81723,.F.); +#81723 = EDGE_LOOP('',(#81724,#81734,#81742,#81750)); +#81724 = ORIENTED_EDGE('',*,*,#81725,.F.); +#81725 = EDGE_CURVE('',#81726,#81728,#81730,.T.); +#81726 = VERTEX_POINT('',#81727); +#81727 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#81728 = VERTEX_POINT('',#81729); +#81729 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#81730 = LINE('',#81731,#81732); +#81731 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#81732 = VECTOR('',#81733,1.); +#81733 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81734 = ORIENTED_EDGE('',*,*,#81735,.F.); +#81735 = EDGE_CURVE('',#81736,#81726,#81738,.T.); +#81736 = VERTEX_POINT('',#81737); +#81737 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#81738 = LINE('',#81739,#81740); +#81739 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#81740 = VECTOR('',#81741,1.); +#81741 = DIRECTION('',(0.,0.,-1.)); +#81742 = ORIENTED_EDGE('',*,*,#81743,.F.); +#81743 = EDGE_CURVE('',#81744,#81736,#81746,.T.); +#81744 = VERTEX_POINT('',#81745); +#81745 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#81746 = LINE('',#81747,#81748); +#81747 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#81748 = VECTOR('',#81749,1.); +#81749 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81750 = ORIENTED_EDGE('',*,*,#81751,.F.); +#81751 = EDGE_CURVE('',#81728,#81744,#81752,.T.); +#81752 = LINE('',#81753,#81754); +#81753 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#81754 = VECTOR('',#81755,1.); +#81755 = DIRECTION('',(0.,0.,1.)); +#81756 = FACE_BOUND('',#81757,.F.); +#81757 = EDGE_LOOP('',(#81758,#81768,#81776,#81784)); +#81758 = ORIENTED_EDGE('',*,*,#81759,.F.); +#81759 = EDGE_CURVE('',#81760,#81762,#81764,.T.); +#81760 = VERTEX_POINT('',#81761); +#81761 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#81762 = VERTEX_POINT('',#81763); +#81763 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#81764 = LINE('',#81765,#81766); +#81765 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#81766 = VECTOR('',#81767,1.); +#81767 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81768 = ORIENTED_EDGE('',*,*,#81769,.F.); +#81769 = EDGE_CURVE('',#81770,#81760,#81772,.T.); +#81770 = VERTEX_POINT('',#81771); +#81771 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#81772 = LINE('',#81773,#81774); +#81773 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#81774 = VECTOR('',#81775,1.); +#81775 = DIRECTION('',(0.,0.,-1.)); +#81776 = ORIENTED_EDGE('',*,*,#81777,.F.); +#81777 = EDGE_CURVE('',#81778,#81770,#81780,.T.); +#81778 = VERTEX_POINT('',#81779); +#81779 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#81780 = LINE('',#81781,#81782); +#81781 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#81782 = VECTOR('',#81783,1.); +#81783 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81784 = ORIENTED_EDGE('',*,*,#81785,.F.); +#81785 = EDGE_CURVE('',#81762,#81778,#81786,.T.); +#81786 = LINE('',#81787,#81788); +#81787 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#81788 = VECTOR('',#81789,1.); +#81789 = DIRECTION('',(0.,0.,1.)); +#81790 = FACE_BOUND('',#81791,.F.); +#81791 = EDGE_LOOP('',(#81792,#81802,#81810,#81818)); +#81792 = ORIENTED_EDGE('',*,*,#81793,.F.); +#81793 = EDGE_CURVE('',#81794,#81796,#81798,.T.); +#81794 = VERTEX_POINT('',#81795); +#81795 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#81796 = VERTEX_POINT('',#81797); +#81797 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#81798 = LINE('',#81799,#81800); +#81799 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#81800 = VECTOR('',#81801,1.); +#81801 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81802 = ORIENTED_EDGE('',*,*,#81803,.F.); +#81803 = EDGE_CURVE('',#81804,#81794,#81806,.T.); +#81804 = VERTEX_POINT('',#81805); +#81805 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#81806 = LINE('',#81807,#81808); +#81807 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#81808 = VECTOR('',#81809,1.); +#81809 = DIRECTION('',(0.,0.,-1.)); +#81810 = ORIENTED_EDGE('',*,*,#81811,.F.); +#81811 = EDGE_CURVE('',#81812,#81804,#81814,.T.); +#81812 = VERTEX_POINT('',#81813); +#81813 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#81814 = LINE('',#81815,#81816); +#81815 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#81816 = VECTOR('',#81817,1.); +#81817 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81818 = ORIENTED_EDGE('',*,*,#81819,.F.); +#81819 = EDGE_CURVE('',#81796,#81812,#81820,.T.); +#81820 = LINE('',#81821,#81822); +#81821 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#81822 = VECTOR('',#81823,1.); +#81823 = DIRECTION('',(0.,0.,1.)); +#81824 = FACE_BOUND('',#81825,.F.); +#81825 = EDGE_LOOP('',(#81826,#81836,#81844,#81852)); +#81826 = ORIENTED_EDGE('',*,*,#81827,.F.); +#81827 = EDGE_CURVE('',#81828,#81830,#81832,.T.); +#81828 = VERTEX_POINT('',#81829); +#81829 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#81830 = VERTEX_POINT('',#81831); +#81831 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#81832 = LINE('',#81833,#81834); +#81833 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#81834 = VECTOR('',#81835,1.); +#81835 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81836 = ORIENTED_EDGE('',*,*,#81837,.F.); +#81837 = EDGE_CURVE('',#81838,#81828,#81840,.T.); +#81838 = VERTEX_POINT('',#81839); +#81839 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#81840 = LINE('',#81841,#81842); +#81841 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#81842 = VECTOR('',#81843,1.); +#81843 = DIRECTION('',(0.,0.,-1.)); +#81844 = ORIENTED_EDGE('',*,*,#81845,.F.); +#81845 = EDGE_CURVE('',#81846,#81838,#81848,.T.); +#81846 = VERTEX_POINT('',#81847); +#81847 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#81848 = LINE('',#81849,#81850); +#81849 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#81850 = VECTOR('',#81851,1.); +#81851 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81852 = ORIENTED_EDGE('',*,*,#81853,.F.); +#81853 = EDGE_CURVE('',#81830,#81846,#81854,.T.); +#81854 = LINE('',#81855,#81856); +#81855 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#81856 = VECTOR('',#81857,1.); +#81857 = DIRECTION('',(0.,0.,1.)); +#81858 = PLANE('',#81859); +#81859 = AXIS2_PLACEMENT_3D('',#81860,#81861,#81862); +#81860 = CARTESIAN_POINT('',(-2.5,-4.6,13.8)); +#81861 = DIRECTION('',(-0.,1.,0.)); +#81862 = DIRECTION('',(0.,0.,-1.)); +#81863 = ADVANCED_FACE('',(#81864),#81882,.F.); +#81864 = FACE_BOUND('',#81865,.F.); +#81865 = EDGE_LOOP('',(#81866,#81874,#81880,#81881)); +#81866 = ORIENTED_EDGE('',*,*,#81867,.T.); +#81867 = EDGE_CURVE('',#81404,#81868,#81870,.T.); +#81868 = VERTEX_POINT('',#81869); +#81869 = CARTESIAN_POINT('',(-3.24,-4.06,7.)); +#81870 = LINE('',#81871,#81872); +#81871 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81872 = VECTOR('',#81873,1.); +#81873 = DIRECTION('',(0.,0.,1.)); +#81874 = ORIENTED_EDGE('',*,*,#81875,.T.); +#81875 = EDGE_CURVE('',#81868,#81621,#81876,.T.); +#81876 = LINE('',#81877,#81878); +#81877 = CARTESIAN_POINT('',(-3.24,-4.06,7.)); +#81878 = VECTOR('',#81879,1.); +#81879 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81880 = ORIENTED_EDGE('',*,*,#81620,.F.); +#81881 = ORIENTED_EDGE('',*,*,#81411,.F.); +#81882 = PLANE('',#81883); +#81883 = AXIS2_PLACEMENT_3D('',#81884,#81885,#81886); +#81884 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81885 = DIRECTION('',(-0.296805080179,0.954938084056,0.)); +#81886 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81887 = ADVANCED_FACE('',(#81888),#81953,.T.); +#81888 = FACE_BOUND('',#81889,.T.); +#81889 = EDGE_LOOP('',(#81890,#81900,#81906,#81907,#81908,#81916,#81924, + #81930,#81931,#81939,#81947)); +#81890 = ORIENTED_EDGE('',*,*,#81891,.T.); +#81891 = EDGE_CURVE('',#81892,#81894,#81896,.T.); +#81892 = VERTEX_POINT('',#81893); +#81893 = CARTESIAN_POINT('',(22.5,-2.6,13.8)); +#81894 = VERTEX_POINT('',#81895); +#81895 = CARTESIAN_POINT('',(22.5,-4.1,7.4)); +#81896 = LINE('',#81897,#81898); +#81897 = CARTESIAN_POINT('',(22.5,-2.6,13.8)); +#81898 = VECTOR('',#81899,1.); +#81899 = DIRECTION('',(0.,-0.228191322789,-0.973616310568)); +#81900 = ORIENTED_EDGE('',*,*,#81901,.T.); +#81901 = EDGE_CURVE('',#81894,#81675,#81902,.T.); +#81902 = LINE('',#81903,#81904); +#81903 = CARTESIAN_POINT('',(22.5,-4.1,7.4)); +#81904 = VECTOR('',#81905,1.); +#81905 = DIRECTION('',(0.,-1.,0.)); +#81906 = ORIENTED_EDGE('',*,*,#81682,.T.); +#81907 = ORIENTED_EDGE('',*,*,#81339,.T.); +#81908 = ORIENTED_EDGE('',*,*,#81909,.T.); +#81909 = EDGE_CURVE('',#81340,#81910,#81912,.T.); +#81910 = VERTEX_POINT('',#81911); +#81911 = CARTESIAN_POINT('',(22.5,-3.83,7.)); +#81912 = LINE('',#81913,#81914); +#81913 = CARTESIAN_POINT('',(22.5,-3.83,0.)); +#81914 = VECTOR('',#81915,1.); +#81915 = DIRECTION('',(0.,0.,1.)); +#81916 = ORIENTED_EDGE('',*,*,#81917,.T.); +#81917 = EDGE_CURVE('',#81910,#81918,#81920,.T.); +#81918 = VERTEX_POINT('',#81919); +#81919 = CARTESIAN_POINT('',(22.5,-3.37,7.)); +#81920 = LINE('',#81921,#81922); +#81921 = CARTESIAN_POINT('',(22.5,-3.83,7.)); +#81922 = VECTOR('',#81923,1.); +#81923 = DIRECTION('',(0.,1.,0.)); +#81924 = ORIENTED_EDGE('',*,*,#81925,.F.); +#81925 = EDGE_CURVE('',#81364,#81918,#81926,.T.); +#81926 = LINE('',#81927,#81928); +#81927 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#81928 = VECTOR('',#81929,1.); +#81929 = DIRECTION('',(0.,0.,1.)); +#81930 = ORIENTED_EDGE('',*,*,#81371,.T.); +#81931 = ORIENTED_EDGE('',*,*,#81932,.T.); +#81932 = EDGE_CURVE('',#81372,#81933,#81935,.T.); +#81933 = VERTEX_POINT('',#81934); +#81934 = CARTESIAN_POINT('',(22.5,5.2,4.57)); +#81935 = LINE('',#81936,#81937); +#81936 = CARTESIAN_POINT('',(22.5,5.2,0.)); +#81937 = VECTOR('',#81938,1.); +#81938 = DIRECTION('',(0.,0.,1.)); +#81939 = ORIENTED_EDGE('',*,*,#81940,.F.); +#81940 = EDGE_CURVE('',#81941,#81933,#81943,.T.); +#81941 = VERTEX_POINT('',#81942); +#81942 = CARTESIAN_POINT('',(22.5,2.2,13.8)); +#81943 = LINE('',#81944,#81945); +#81944 = CARTESIAN_POINT('',(22.5,2.2,13.8)); +#81945 = VECTOR('',#81946,1.); +#81946 = DIRECTION('',(0.,0.309109370483,-0.951026496518)); +#81947 = ORIENTED_EDGE('',*,*,#81948,.T.); +#81948 = EDGE_CURVE('',#81941,#81892,#81949,.T.); +#81949 = LINE('',#81950,#81951); +#81950 = CARTESIAN_POINT('',(22.5,5.2,13.8)); +#81951 = VECTOR('',#81952,1.); +#81952 = DIRECTION('',(0.,-1.,0.)); +#81953 = PLANE('',#81954); +#81954 = AXIS2_PLACEMENT_3D('',#81955,#81956,#81957); +#81955 = CARTESIAN_POINT('',(22.5,0.3,6.9)); +#81956 = DIRECTION('',(1.,0.,0.)); +#81957 = DIRECTION('',(-0.,0.,1.)); +#81958 = ADVANCED_FACE('',(#81959),#81977,.F.); +#81959 = FACE_BOUND('',#81960,.F.); +#81960 = EDGE_LOOP('',(#81961,#81969,#81975,#81976)); +#81961 = ORIENTED_EDGE('',*,*,#81962,.T.); +#81962 = EDGE_CURVE('',#81396,#81963,#81965,.T.); +#81963 = VERTEX_POINT('',#81964); +#81964 = CARTESIAN_POINT('',(-3.24,-3.14,7.)); +#81965 = LINE('',#81966,#81967); +#81966 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81967 = VECTOR('',#81968,1.); +#81968 = DIRECTION('',(0.,0.,1.)); +#81969 = ORIENTED_EDGE('',*,*,#81970,.T.); +#81970 = EDGE_CURVE('',#81963,#81868,#81971,.T.); +#81971 = LINE('',#81972,#81973); +#81972 = CARTESIAN_POINT('',(-3.24,-3.14,7.)); +#81973 = VECTOR('',#81974,1.); +#81974 = DIRECTION('',(0.,-1.,0.)); +#81975 = ORIENTED_EDGE('',*,*,#81867,.F.); +#81976 = ORIENTED_EDGE('',*,*,#81403,.F.); +#81977 = PLANE('',#81978); +#81978 = AXIS2_PLACEMENT_3D('',#81979,#81980,#81981); +#81979 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81980 = DIRECTION('',(1.,0.,-0.)); +#81981 = DIRECTION('',(0.,-1.,0.)); +#81982 = ADVANCED_FACE('',(#81983),#82001,.T.); +#81983 = FACE_BOUND('',#81984,.T.); +#81984 = EDGE_LOOP('',(#81985,#81993,#81999,#82000)); +#81985 = ORIENTED_EDGE('',*,*,#81986,.T.); +#81986 = EDGE_CURVE('',#81348,#81987,#81989,.T.); +#81987 = VERTEX_POINT('',#81988); +#81988 = CARTESIAN_POINT('',(21.76,-4.06,7.)); +#81989 = LINE('',#81990,#81991); +#81990 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#81991 = VECTOR('',#81992,1.); +#81992 = DIRECTION('',(0.,0.,1.)); +#81993 = ORIENTED_EDGE('',*,*,#81994,.T.); +#81994 = EDGE_CURVE('',#81987,#81910,#81995,.T.); +#81995 = LINE('',#81996,#81997); +#81996 = CARTESIAN_POINT('',(21.76,-4.06,7.)); +#81997 = VECTOR('',#81998,1.); +#81998 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81999 = ORIENTED_EDGE('',*,*,#81909,.F.); +#82000 = ORIENTED_EDGE('',*,*,#81347,.F.); +#82001 = PLANE('',#82002); +#82002 = AXIS2_PLACEMENT_3D('',#82003,#82004,#82005); +#82003 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#82004 = DIRECTION('',(-0.296805080179,0.954938084056,0.)); +#82005 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#82006 = ADVANCED_FACE('',(#82007),#82018,.F.); +#82007 = FACE_BOUND('',#82008,.F.); +#82008 = EDGE_LOOP('',(#82009,#82010,#82016,#82017)); +#82009 = ORIENTED_EDGE('',*,*,#81636,.T.); +#82010 = ORIENTED_EDGE('',*,*,#82011,.T.); +#82011 = EDGE_CURVE('',#81629,#81963,#82012,.T.); +#82012 = LINE('',#82013,#82014); +#82013 = CARTESIAN_POINT('',(-2.5,-3.37,7.)); +#82014 = VECTOR('',#82015,1.); +#82015 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82016 = ORIENTED_EDGE('',*,*,#81962,.F.); +#82017 = ORIENTED_EDGE('',*,*,#81395,.F.); +#82018 = PLANE('',#82019); +#82019 = AXIS2_PLACEMENT_3D('',#82020,#82021,#82022); +#82020 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#82021 = DIRECTION('',(-0.296805080179,-0.954938084056,0.)); +#82022 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82023 = ADVANCED_FACE('',(#82024),#82042,.T.); +#82024 = FACE_BOUND('',#82025,.T.); +#82025 = EDGE_LOOP('',(#82026,#82034,#82040,#82041)); +#82026 = ORIENTED_EDGE('',*,*,#82027,.T.); +#82027 = EDGE_CURVE('',#81356,#82028,#82030,.T.); +#82028 = VERTEX_POINT('',#82029); +#82029 = CARTESIAN_POINT('',(21.76,-3.14,7.)); +#82030 = LINE('',#82031,#82032); +#82031 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#82032 = VECTOR('',#82033,1.); +#82033 = DIRECTION('',(0.,0.,1.)); +#82034 = ORIENTED_EDGE('',*,*,#82035,.T.); +#82035 = EDGE_CURVE('',#82028,#81987,#82036,.T.); +#82036 = LINE('',#82037,#82038); +#82037 = CARTESIAN_POINT('',(21.76,-3.14,7.)); +#82038 = VECTOR('',#82039,1.); +#82039 = DIRECTION('',(0.,-1.,0.)); +#82040 = ORIENTED_EDGE('',*,*,#81986,.F.); +#82041 = ORIENTED_EDGE('',*,*,#81355,.F.); +#82042 = PLANE('',#82043); +#82043 = AXIS2_PLACEMENT_3D('',#82044,#82045,#82046); +#82044 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#82045 = DIRECTION('',(1.,0.,-0.)); +#82046 = DIRECTION('',(0.,-1.,0.)); +#82047 = ADVANCED_FACE('',(#82048),#82059,.T.); +#82048 = FACE_BOUND('',#82049,.T.); +#82049 = EDGE_LOOP('',(#82050,#82051,#82057,#82058)); +#82050 = ORIENTED_EDGE('',*,*,#81925,.T.); +#82051 = ORIENTED_EDGE('',*,*,#82052,.T.); +#82052 = EDGE_CURVE('',#81918,#82028,#82053,.T.); +#82053 = LINE('',#82054,#82055); +#82054 = CARTESIAN_POINT('',(22.5,-3.37,7.)); +#82055 = VECTOR('',#82056,1.); +#82056 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82057 = ORIENTED_EDGE('',*,*,#82027,.F.); +#82058 = ORIENTED_EDGE('',*,*,#81363,.F.); +#82059 = PLANE('',#82060); +#82060 = AXIS2_PLACEMENT_3D('',#82061,#82062,#82063); +#82061 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#82062 = DIRECTION('',(-0.296805080179,-0.954938084056,0.)); +#82063 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82064 = ADVANCED_FACE('',(#82065),#82076,.F.); +#82065 = FACE_BOUND('',#82066,.F.); +#82066 = EDGE_LOOP('',(#82067,#82068,#82069,#82070)); +#82067 = ORIENTED_EDGE('',*,*,#81643,.F.); +#82068 = ORIENTED_EDGE('',*,*,#81379,.T.); +#82069 = ORIENTED_EDGE('',*,*,#81932,.T.); +#82070 = ORIENTED_EDGE('',*,*,#82071,.F.); +#82071 = EDGE_CURVE('',#81644,#81933,#82072,.T.); +#82072 = LINE('',#82073,#82074); +#82073 = CARTESIAN_POINT('',(-2.5,5.2,4.57)); +#82074 = VECTOR('',#82075,1.); +#82075 = DIRECTION('',(1.,0.,0.)); +#82076 = PLANE('',#82077); +#82077 = AXIS2_PLACEMENT_3D('',#82078,#82079,#82080); +#82078 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#82079 = DIRECTION('',(0.,-1.,0.)); +#82080 = DIRECTION('',(0.,0.,1.)); +#82081 = ADVANCED_FACE('',(#82082),#82107,.T.); +#82082 = FACE_BOUND('',#82083,.T.); +#82083 = EDGE_LOOP('',(#82084,#82085,#82093,#82101)); +#82084 = ORIENTED_EDGE('',*,*,#81419,.F.); +#82085 = ORIENTED_EDGE('',*,*,#82086,.T.); +#82086 = EDGE_CURVE('',#81420,#82087,#82089,.T.); +#82087 = VERTEX_POINT('',#82088); +#82088 = CARTESIAN_POINT('',(19.55,-0.45,-3.5)); +#82089 = LINE('',#82090,#82091); +#82090 = CARTESIAN_POINT('',(19.55,-0.45,2.4)); +#82091 = VECTOR('',#82092,1.); +#82092 = DIRECTION('',(-0.,-0.,-1.)); +#82093 = ORIENTED_EDGE('',*,*,#82094,.T.); +#82094 = EDGE_CURVE('',#82087,#82095,#82097,.T.); +#82095 = VERTEX_POINT('',#82096); +#82096 = CARTESIAN_POINT('',(20.45,-0.45,-3.5)); +#82097 = LINE('',#82098,#82099); +#82098 = CARTESIAN_POINT('',(19.55,-0.45,-3.5)); +#82099 = VECTOR('',#82100,1.); +#82100 = DIRECTION('',(1.,0.,0.)); +#82101 = ORIENTED_EDGE('',*,*,#82102,.F.); +#82102 = EDGE_CURVE('',#81422,#82095,#82103,.T.); +#82103 = LINE('',#82104,#82105); +#82104 = CARTESIAN_POINT('',(20.45,-0.45,2.4)); +#82105 = VECTOR('',#82106,1.); +#82106 = DIRECTION('',(-0.,-0.,-1.)); +#82107 = PLANE('',#82108); +#82108 = AXIS2_PLACEMENT_3D('',#82109,#82110,#82111); +#82109 = CARTESIAN_POINT('',(19.55,-0.45,2.4)); +#82110 = DIRECTION('',(0.,-1.,0.)); +#82111 = DIRECTION('',(1.,0.,0.)); +#82112 = ADVANCED_FACE('',(#82113),#82131,.T.); +#82113 = FACE_BOUND('',#82114,.T.); +#82114 = EDGE_LOOP('',(#82115,#82116,#82117,#82125)); +#82115 = ORIENTED_EDGE('',*,*,#81445,.F.); +#82116 = ORIENTED_EDGE('',*,*,#82102,.T.); +#82117 = ORIENTED_EDGE('',*,*,#82118,.T.); +#82118 = EDGE_CURVE('',#82095,#82119,#82121,.T.); +#82119 = VERTEX_POINT('',#82120); +#82120 = CARTESIAN_POINT('',(20.45,0.45,-3.5)); +#82121 = LINE('',#82122,#82123); +#82122 = CARTESIAN_POINT('',(20.45,-0.45,-3.5)); +#82123 = VECTOR('',#82124,1.); +#82124 = DIRECTION('',(0.,1.,0.)); +#82125 = ORIENTED_EDGE('',*,*,#82126,.F.); +#82126 = EDGE_CURVE('',#81438,#82119,#82127,.T.); +#82127 = LINE('',#82128,#82129); +#82128 = CARTESIAN_POINT('',(20.45,0.45,2.4)); +#82129 = VECTOR('',#82130,1.); +#82130 = DIRECTION('',(-0.,-0.,-1.)); +#82131 = PLANE('',#82132); +#82132 = AXIS2_PLACEMENT_3D('',#82133,#82134,#82135); +#82133 = CARTESIAN_POINT('',(20.45,-0.45,2.4)); +#82134 = DIRECTION('',(1.,0.,0.)); +#82135 = DIRECTION('',(-0.,1.,0.)); +#82136 = ADVANCED_FACE('',(#82137),#82155,.T.); +#82137 = FACE_BOUND('',#82138,.T.); +#82138 = EDGE_LOOP('',(#82139,#82140,#82141,#82149)); +#82139 = ORIENTED_EDGE('',*,*,#81437,.F.); +#82140 = ORIENTED_EDGE('',*,*,#82126,.T.); +#82141 = ORIENTED_EDGE('',*,*,#82142,.T.); +#82142 = EDGE_CURVE('',#82119,#82143,#82145,.T.); +#82143 = VERTEX_POINT('',#82144); +#82144 = CARTESIAN_POINT('',(19.55,0.45,-3.5)); +#82145 = LINE('',#82146,#82147); +#82146 = CARTESIAN_POINT('',(20.45,0.45,-3.5)); +#82147 = VECTOR('',#82148,1.); +#82148 = DIRECTION('',(-1.,0.,0.)); +#82149 = ORIENTED_EDGE('',*,*,#82150,.F.); +#82150 = EDGE_CURVE('',#81430,#82143,#82151,.T.); +#82151 = LINE('',#82152,#82153); +#82152 = CARTESIAN_POINT('',(19.55,0.45,2.4)); +#82153 = VECTOR('',#82154,1.); +#82154 = DIRECTION('',(-0.,-0.,-1.)); +#82155 = PLANE('',#82156); +#82156 = AXIS2_PLACEMENT_3D('',#82157,#82158,#82159); +#82157 = CARTESIAN_POINT('',(20.45,0.45,2.4)); +#82158 = DIRECTION('',(0.,1.,-0.)); +#82159 = DIRECTION('',(-1.,0.,0.)); +#82160 = ADVANCED_FACE('',(#82161),#82172,.T.); +#82161 = FACE_BOUND('',#82162,.T.); +#82162 = EDGE_LOOP('',(#82163,#82164,#82165,#82171)); +#82163 = ORIENTED_EDGE('',*,*,#81429,.F.); +#82164 = ORIENTED_EDGE('',*,*,#82150,.T.); +#82165 = ORIENTED_EDGE('',*,*,#82166,.T.); +#82166 = EDGE_CURVE('',#82143,#82087,#82167,.T.); +#82167 = LINE('',#82168,#82169); +#82168 = CARTESIAN_POINT('',(19.55,0.45,-3.5)); +#82169 = VECTOR('',#82170,1.); +#82170 = DIRECTION('',(0.,-1.,0.)); +#82171 = ORIENTED_EDGE('',*,*,#82086,.F.); +#82172 = PLANE('',#82173); +#82173 = AXIS2_PLACEMENT_3D('',#82174,#82175,#82176); +#82174 = CARTESIAN_POINT('',(19.55,0.45,2.4)); +#82175 = DIRECTION('',(-1.,0.,0.)); +#82176 = DIRECTION('',(0.,-1.,0.)); +#82177 = ADVANCED_FACE('',(#82178),#82203,.T.); +#82178 = FACE_BOUND('',#82179,.T.); +#82179 = EDGE_LOOP('',(#82180,#82181,#82189,#82197)); +#82180 = ORIENTED_EDGE('',*,*,#81453,.F.); +#82181 = ORIENTED_EDGE('',*,*,#82182,.T.); +#82182 = EDGE_CURVE('',#81454,#82183,#82185,.T.); +#82183 = VERTEX_POINT('',#82184); +#82184 = CARTESIAN_POINT('',(14.55,-0.45,-3.5)); +#82185 = LINE('',#82186,#82187); +#82186 = CARTESIAN_POINT('',(14.55,-0.45,2.4)); +#82187 = VECTOR('',#82188,1.); +#82188 = DIRECTION('',(-0.,-0.,-1.)); +#82189 = ORIENTED_EDGE('',*,*,#82190,.T.); +#82190 = EDGE_CURVE('',#82183,#82191,#82193,.T.); +#82191 = VERTEX_POINT('',#82192); +#82192 = CARTESIAN_POINT('',(15.45,-0.45,-3.5)); +#82193 = LINE('',#82194,#82195); +#82194 = CARTESIAN_POINT('',(14.55,-0.45,-3.5)); +#82195 = VECTOR('',#82196,1.); +#82196 = DIRECTION('',(1.,0.,0.)); +#82197 = ORIENTED_EDGE('',*,*,#82198,.F.); +#82198 = EDGE_CURVE('',#81456,#82191,#82199,.T.); +#82199 = LINE('',#82200,#82201); +#82200 = CARTESIAN_POINT('',(15.45,-0.45,2.4)); +#82201 = VECTOR('',#82202,1.); +#82202 = DIRECTION('',(-0.,-0.,-1.)); +#82203 = PLANE('',#82204); +#82204 = AXIS2_PLACEMENT_3D('',#82205,#82206,#82207); +#82205 = CARTESIAN_POINT('',(14.55,-0.45,2.4)); +#82206 = DIRECTION('',(0.,-1.,0.)); +#82207 = DIRECTION('',(1.,0.,0.)); +#82208 = ADVANCED_FACE('',(#82209),#82227,.T.); +#82209 = FACE_BOUND('',#82210,.T.); +#82210 = EDGE_LOOP('',(#82211,#82212,#82213,#82221)); +#82211 = ORIENTED_EDGE('',*,*,#81479,.F.); +#82212 = ORIENTED_EDGE('',*,*,#82198,.T.); +#82213 = ORIENTED_EDGE('',*,*,#82214,.T.); +#82214 = EDGE_CURVE('',#82191,#82215,#82217,.T.); +#82215 = VERTEX_POINT('',#82216); +#82216 = CARTESIAN_POINT('',(15.45,0.45,-3.5)); +#82217 = LINE('',#82218,#82219); +#82218 = CARTESIAN_POINT('',(15.45,-0.45,-3.5)); +#82219 = VECTOR('',#82220,1.); +#82220 = DIRECTION('',(0.,1.,0.)); +#82221 = ORIENTED_EDGE('',*,*,#82222,.F.); +#82222 = EDGE_CURVE('',#81472,#82215,#82223,.T.); +#82223 = LINE('',#82224,#82225); +#82224 = CARTESIAN_POINT('',(15.45,0.45,2.4)); +#82225 = VECTOR('',#82226,1.); +#82226 = DIRECTION('',(-0.,-0.,-1.)); +#82227 = PLANE('',#82228); +#82228 = AXIS2_PLACEMENT_3D('',#82229,#82230,#82231); +#82229 = CARTESIAN_POINT('',(15.45,-0.45,2.4)); +#82230 = DIRECTION('',(1.,0.,0.)); +#82231 = DIRECTION('',(-0.,1.,0.)); +#82232 = ADVANCED_FACE('',(#82233),#82251,.T.); +#82233 = FACE_BOUND('',#82234,.T.); +#82234 = EDGE_LOOP('',(#82235,#82236,#82237,#82245)); +#82235 = ORIENTED_EDGE('',*,*,#81471,.F.); +#82236 = ORIENTED_EDGE('',*,*,#82222,.T.); +#82237 = ORIENTED_EDGE('',*,*,#82238,.T.); +#82238 = EDGE_CURVE('',#82215,#82239,#82241,.T.); +#82239 = VERTEX_POINT('',#82240); +#82240 = CARTESIAN_POINT('',(14.55,0.45,-3.5)); +#82241 = LINE('',#82242,#82243); +#82242 = CARTESIAN_POINT('',(15.45,0.45,-3.5)); +#82243 = VECTOR('',#82244,1.); +#82244 = DIRECTION('',(-1.,0.,0.)); +#82245 = ORIENTED_EDGE('',*,*,#82246,.F.); +#82246 = EDGE_CURVE('',#81464,#82239,#82247,.T.); +#82247 = LINE('',#82248,#82249); +#82248 = CARTESIAN_POINT('',(14.55,0.45,2.4)); +#82249 = VECTOR('',#82250,1.); +#82250 = DIRECTION('',(-0.,-0.,-1.)); +#82251 = PLANE('',#82252); +#82252 = AXIS2_PLACEMENT_3D('',#82253,#82254,#82255); +#82253 = CARTESIAN_POINT('',(15.45,0.45,2.4)); +#82254 = DIRECTION('',(0.,1.,-0.)); +#82255 = DIRECTION('',(-1.,0.,0.)); +#82256 = ADVANCED_FACE('',(#82257),#82268,.T.); +#82257 = FACE_BOUND('',#82258,.T.); +#82258 = EDGE_LOOP('',(#82259,#82260,#82261,#82267)); +#82259 = ORIENTED_EDGE('',*,*,#81463,.F.); +#82260 = ORIENTED_EDGE('',*,*,#82246,.T.); +#82261 = ORIENTED_EDGE('',*,*,#82262,.T.); +#82262 = EDGE_CURVE('',#82239,#82183,#82263,.T.); +#82263 = LINE('',#82264,#82265); +#82264 = CARTESIAN_POINT('',(14.55,0.45,-3.5)); +#82265 = VECTOR('',#82266,1.); +#82266 = DIRECTION('',(0.,-1.,0.)); +#82267 = ORIENTED_EDGE('',*,*,#82182,.F.); +#82268 = PLANE('',#82269); +#82269 = AXIS2_PLACEMENT_3D('',#82270,#82271,#82272); +#82270 = CARTESIAN_POINT('',(14.55,0.45,2.4)); +#82271 = DIRECTION('',(-1.,0.,0.)); +#82272 = DIRECTION('',(0.,-1.,0.)); +#82273 = ADVANCED_FACE('',(#82274),#82299,.T.); +#82274 = FACE_BOUND('',#82275,.T.); +#82275 = EDGE_LOOP('',(#82276,#82277,#82285,#82293)); +#82276 = ORIENTED_EDGE('',*,*,#81487,.F.); +#82277 = ORIENTED_EDGE('',*,*,#82278,.T.); +#82278 = EDGE_CURVE('',#81488,#82279,#82281,.T.); +#82279 = VERTEX_POINT('',#82280); +#82280 = CARTESIAN_POINT('',(9.55,-0.45,-3.5)); +#82281 = LINE('',#82282,#82283); +#82282 = CARTESIAN_POINT('',(9.55,-0.45,2.4)); +#82283 = VECTOR('',#82284,1.); +#82284 = DIRECTION('',(-0.,-0.,-1.)); +#82285 = ORIENTED_EDGE('',*,*,#82286,.T.); +#82286 = EDGE_CURVE('',#82279,#82287,#82289,.T.); +#82287 = VERTEX_POINT('',#82288); +#82288 = CARTESIAN_POINT('',(10.45,-0.45,-3.5)); +#82289 = LINE('',#82290,#82291); +#82290 = CARTESIAN_POINT('',(9.55,-0.45,-3.5)); +#82291 = VECTOR('',#82292,1.); +#82292 = DIRECTION('',(1.,0.,0.)); +#82293 = ORIENTED_EDGE('',*,*,#82294,.F.); +#82294 = EDGE_CURVE('',#81490,#82287,#82295,.T.); +#82295 = LINE('',#82296,#82297); +#82296 = CARTESIAN_POINT('',(10.45,-0.45,2.4)); +#82297 = VECTOR('',#82298,1.); +#82298 = DIRECTION('',(-0.,-0.,-1.)); +#82299 = PLANE('',#82300); +#82300 = AXIS2_PLACEMENT_3D('',#82301,#82302,#82303); +#82301 = CARTESIAN_POINT('',(9.55,-0.45,2.4)); +#82302 = DIRECTION('',(0.,-1.,0.)); +#82303 = DIRECTION('',(1.,0.,0.)); +#82304 = ADVANCED_FACE('',(#82305),#82323,.T.); +#82305 = FACE_BOUND('',#82306,.T.); +#82306 = EDGE_LOOP('',(#82307,#82308,#82309,#82317)); +#82307 = ORIENTED_EDGE('',*,*,#81513,.F.); +#82308 = ORIENTED_EDGE('',*,*,#82294,.T.); +#82309 = ORIENTED_EDGE('',*,*,#82310,.T.); +#82310 = EDGE_CURVE('',#82287,#82311,#82313,.T.); +#82311 = VERTEX_POINT('',#82312); +#82312 = CARTESIAN_POINT('',(10.45,0.45,-3.5)); +#82313 = LINE('',#82314,#82315); +#82314 = CARTESIAN_POINT('',(10.45,-0.45,-3.5)); +#82315 = VECTOR('',#82316,1.); +#82316 = DIRECTION('',(0.,1.,0.)); +#82317 = ORIENTED_EDGE('',*,*,#82318,.F.); +#82318 = EDGE_CURVE('',#81506,#82311,#82319,.T.); +#82319 = LINE('',#82320,#82321); +#82320 = CARTESIAN_POINT('',(10.45,0.45,2.4)); +#82321 = VECTOR('',#82322,1.); +#82322 = DIRECTION('',(-0.,-0.,-1.)); +#82323 = PLANE('',#82324); +#82324 = AXIS2_PLACEMENT_3D('',#82325,#82326,#82327); +#82325 = CARTESIAN_POINT('',(10.45,-0.45,2.4)); +#82326 = DIRECTION('',(1.,0.,0.)); +#82327 = DIRECTION('',(-0.,1.,0.)); +#82328 = ADVANCED_FACE('',(#82329),#82347,.T.); +#82329 = FACE_BOUND('',#82330,.T.); +#82330 = EDGE_LOOP('',(#82331,#82332,#82333,#82341)); +#82331 = ORIENTED_EDGE('',*,*,#81505,.F.); +#82332 = ORIENTED_EDGE('',*,*,#82318,.T.); +#82333 = ORIENTED_EDGE('',*,*,#82334,.T.); +#82334 = EDGE_CURVE('',#82311,#82335,#82337,.T.); +#82335 = VERTEX_POINT('',#82336); +#82336 = CARTESIAN_POINT('',(9.55,0.45,-3.5)); +#82337 = LINE('',#82338,#82339); +#82338 = CARTESIAN_POINT('',(10.45,0.45,-3.5)); +#82339 = VECTOR('',#82340,1.); +#82340 = DIRECTION('',(-1.,0.,0.)); +#82341 = ORIENTED_EDGE('',*,*,#82342,.F.); +#82342 = EDGE_CURVE('',#81498,#82335,#82343,.T.); +#82343 = LINE('',#82344,#82345); +#82344 = CARTESIAN_POINT('',(9.55,0.45,2.4)); +#82345 = VECTOR('',#82346,1.); +#82346 = DIRECTION('',(-0.,-0.,-1.)); +#82347 = PLANE('',#82348); +#82348 = AXIS2_PLACEMENT_3D('',#82349,#82350,#82351); +#82349 = CARTESIAN_POINT('',(10.45,0.45,2.4)); +#82350 = DIRECTION('',(0.,1.,-0.)); +#82351 = DIRECTION('',(-1.,0.,0.)); +#82352 = ADVANCED_FACE('',(#82353),#82364,.T.); +#82353 = FACE_BOUND('',#82354,.T.); +#82354 = EDGE_LOOP('',(#82355,#82356,#82357,#82363)); +#82355 = ORIENTED_EDGE('',*,*,#81497,.F.); +#82356 = ORIENTED_EDGE('',*,*,#82342,.T.); +#82357 = ORIENTED_EDGE('',*,*,#82358,.T.); +#82358 = EDGE_CURVE('',#82335,#82279,#82359,.T.); +#82359 = LINE('',#82360,#82361); +#82360 = CARTESIAN_POINT('',(9.55,0.45,-3.5)); +#82361 = VECTOR('',#82362,1.); +#82362 = DIRECTION('',(0.,-1.,0.)); +#82363 = ORIENTED_EDGE('',*,*,#82278,.F.); +#82364 = PLANE('',#82365); +#82365 = AXIS2_PLACEMENT_3D('',#82366,#82367,#82368); +#82366 = CARTESIAN_POINT('',(9.55,0.45,2.4)); +#82367 = DIRECTION('',(-1.,0.,0.)); +#82368 = DIRECTION('',(0.,-1.,0.)); +#82369 = ADVANCED_FACE('',(#82370),#82395,.T.); +#82370 = FACE_BOUND('',#82371,.T.); +#82371 = EDGE_LOOP('',(#82372,#82373,#82381,#82389)); +#82372 = ORIENTED_EDGE('',*,*,#81521,.F.); +#82373 = ORIENTED_EDGE('',*,*,#82374,.T.); +#82374 = EDGE_CURVE('',#81522,#82375,#82377,.T.); +#82375 = VERTEX_POINT('',#82376); +#82376 = CARTESIAN_POINT('',(4.55,-0.45,-3.5)); +#82377 = LINE('',#82378,#82379); +#82378 = CARTESIAN_POINT('',(4.55,-0.45,2.4)); +#82379 = VECTOR('',#82380,1.); +#82380 = DIRECTION('',(-0.,-0.,-1.)); +#82381 = ORIENTED_EDGE('',*,*,#82382,.T.); +#82382 = EDGE_CURVE('',#82375,#82383,#82385,.T.); +#82383 = VERTEX_POINT('',#82384); +#82384 = CARTESIAN_POINT('',(5.45,-0.45,-3.5)); +#82385 = LINE('',#82386,#82387); +#82386 = CARTESIAN_POINT('',(4.55,-0.45,-3.5)); +#82387 = VECTOR('',#82388,1.); +#82388 = DIRECTION('',(1.,0.,0.)); +#82389 = ORIENTED_EDGE('',*,*,#82390,.F.); +#82390 = EDGE_CURVE('',#81524,#82383,#82391,.T.); +#82391 = LINE('',#82392,#82393); +#82392 = CARTESIAN_POINT('',(5.45,-0.45,2.4)); +#82393 = VECTOR('',#82394,1.); +#82394 = DIRECTION('',(-0.,-0.,-1.)); +#82395 = PLANE('',#82396); +#82396 = AXIS2_PLACEMENT_3D('',#82397,#82398,#82399); +#82397 = CARTESIAN_POINT('',(4.55,-0.45,2.4)); +#82398 = DIRECTION('',(0.,-1.,0.)); +#82399 = DIRECTION('',(1.,0.,0.)); +#82400 = ADVANCED_FACE('',(#82401),#82419,.T.); +#82401 = FACE_BOUND('',#82402,.T.); +#82402 = EDGE_LOOP('',(#82403,#82404,#82405,#82413)); +#82403 = ORIENTED_EDGE('',*,*,#81547,.F.); +#82404 = ORIENTED_EDGE('',*,*,#82390,.T.); +#82405 = ORIENTED_EDGE('',*,*,#82406,.T.); +#82406 = EDGE_CURVE('',#82383,#82407,#82409,.T.); +#82407 = VERTEX_POINT('',#82408); +#82408 = CARTESIAN_POINT('',(5.45,0.45,-3.5)); +#82409 = LINE('',#82410,#82411); +#82410 = CARTESIAN_POINT('',(5.45,-0.45,-3.5)); +#82411 = VECTOR('',#82412,1.); +#82412 = DIRECTION('',(0.,1.,0.)); +#82413 = ORIENTED_EDGE('',*,*,#82414,.F.); +#82414 = EDGE_CURVE('',#81540,#82407,#82415,.T.); +#82415 = LINE('',#82416,#82417); +#82416 = CARTESIAN_POINT('',(5.45,0.45,2.4)); +#82417 = VECTOR('',#82418,1.); +#82418 = DIRECTION('',(-0.,-0.,-1.)); +#82419 = PLANE('',#82420); +#82420 = AXIS2_PLACEMENT_3D('',#82421,#82422,#82423); +#82421 = CARTESIAN_POINT('',(5.45,-0.45,2.4)); +#82422 = DIRECTION('',(1.,0.,0.)); +#82423 = DIRECTION('',(-0.,1.,0.)); +#82424 = ADVANCED_FACE('',(#82425),#82443,.T.); +#82425 = FACE_BOUND('',#82426,.T.); +#82426 = EDGE_LOOP('',(#82427,#82428,#82429,#82437)); +#82427 = ORIENTED_EDGE('',*,*,#81539,.F.); +#82428 = ORIENTED_EDGE('',*,*,#82414,.T.); +#82429 = ORIENTED_EDGE('',*,*,#82430,.T.); +#82430 = EDGE_CURVE('',#82407,#82431,#82433,.T.); +#82431 = VERTEX_POINT('',#82432); +#82432 = CARTESIAN_POINT('',(4.55,0.45,-3.5)); +#82433 = LINE('',#82434,#82435); +#82434 = CARTESIAN_POINT('',(5.45,0.45,-3.5)); +#82435 = VECTOR('',#82436,1.); +#82436 = DIRECTION('',(-1.,0.,0.)); +#82437 = ORIENTED_EDGE('',*,*,#82438,.F.); +#82438 = EDGE_CURVE('',#81532,#82431,#82439,.T.); +#82439 = LINE('',#82440,#82441); +#82440 = CARTESIAN_POINT('',(4.55,0.45,2.4)); +#82441 = VECTOR('',#82442,1.); +#82442 = DIRECTION('',(-0.,-0.,-1.)); +#82443 = PLANE('',#82444); +#82444 = AXIS2_PLACEMENT_3D('',#82445,#82446,#82447); +#82445 = CARTESIAN_POINT('',(5.45,0.45,2.4)); +#82446 = DIRECTION('',(0.,1.,-0.)); +#82447 = DIRECTION('',(-1.,0.,0.)); +#82448 = ADVANCED_FACE('',(#82449),#82460,.T.); +#82449 = FACE_BOUND('',#82450,.T.); +#82450 = EDGE_LOOP('',(#82451,#82452,#82453,#82459)); +#82451 = ORIENTED_EDGE('',*,*,#81531,.F.); +#82452 = ORIENTED_EDGE('',*,*,#82438,.T.); +#82453 = ORIENTED_EDGE('',*,*,#82454,.T.); +#82454 = EDGE_CURVE('',#82431,#82375,#82455,.T.); +#82455 = LINE('',#82456,#82457); +#82456 = CARTESIAN_POINT('',(4.55,0.45,-3.5)); +#82457 = VECTOR('',#82458,1.); +#82458 = DIRECTION('',(0.,-1.,0.)); +#82459 = ORIENTED_EDGE('',*,*,#82374,.F.); +#82460 = PLANE('',#82461); +#82461 = AXIS2_PLACEMENT_3D('',#82462,#82463,#82464); +#82462 = CARTESIAN_POINT('',(4.55,0.45,2.4)); +#82463 = DIRECTION('',(-1.,0.,0.)); +#82464 = DIRECTION('',(0.,-1.,0.)); +#82465 = ADVANCED_FACE('',(#82466),#82491,.T.); +#82466 = FACE_BOUND('',#82467,.T.); +#82467 = EDGE_LOOP('',(#82468,#82469,#82477,#82485)); +#82468 = ORIENTED_EDGE('',*,*,#81555,.F.); +#82469 = ORIENTED_EDGE('',*,*,#82470,.T.); +#82470 = EDGE_CURVE('',#81556,#82471,#82473,.T.); +#82471 = VERTEX_POINT('',#82472); +#82472 = CARTESIAN_POINT('',(-0.45,-0.45,-3.5)); +#82473 = LINE('',#82474,#82475); +#82474 = CARTESIAN_POINT('',(-0.45,-0.45,2.4)); +#82475 = VECTOR('',#82476,1.); +#82476 = DIRECTION('',(-0.,-0.,-1.)); +#82477 = ORIENTED_EDGE('',*,*,#82478,.T.); +#82478 = EDGE_CURVE('',#82471,#82479,#82481,.T.); +#82479 = VERTEX_POINT('',#82480); +#82480 = CARTESIAN_POINT('',(0.45,-0.45,-3.5)); +#82481 = LINE('',#82482,#82483); +#82482 = CARTESIAN_POINT('',(-0.45,-0.45,-3.5)); +#82483 = VECTOR('',#82484,1.); +#82484 = DIRECTION('',(1.,0.,0.)); +#82485 = ORIENTED_EDGE('',*,*,#82486,.F.); +#82486 = EDGE_CURVE('',#81558,#82479,#82487,.T.); +#82487 = LINE('',#82488,#82489); +#82488 = CARTESIAN_POINT('',(0.45,-0.45,2.4)); +#82489 = VECTOR('',#82490,1.); +#82490 = DIRECTION('',(-0.,-0.,-1.)); +#82491 = PLANE('',#82492); +#82492 = AXIS2_PLACEMENT_3D('',#82493,#82494,#82495); +#82493 = CARTESIAN_POINT('',(-0.45,-0.45,2.4)); +#82494 = DIRECTION('',(0.,-1.,0.)); +#82495 = DIRECTION('',(1.,0.,0.)); +#82496 = ADVANCED_FACE('',(#82497),#82515,.T.); +#82497 = FACE_BOUND('',#82498,.T.); +#82498 = EDGE_LOOP('',(#82499,#82500,#82501,#82509)); +#82499 = ORIENTED_EDGE('',*,*,#81581,.F.); +#82500 = ORIENTED_EDGE('',*,*,#82486,.T.); +#82501 = ORIENTED_EDGE('',*,*,#82502,.T.); +#82502 = EDGE_CURVE('',#82479,#82503,#82505,.T.); +#82503 = VERTEX_POINT('',#82504); +#82504 = CARTESIAN_POINT('',(0.45,0.45,-3.5)); +#82505 = LINE('',#82506,#82507); +#82506 = CARTESIAN_POINT('',(0.45,-0.45,-3.5)); +#82507 = VECTOR('',#82508,1.); +#82508 = DIRECTION('',(0.,1.,0.)); +#82509 = ORIENTED_EDGE('',*,*,#82510,.F.); +#82510 = EDGE_CURVE('',#81574,#82503,#82511,.T.); +#82511 = LINE('',#82512,#82513); +#82512 = CARTESIAN_POINT('',(0.45,0.45,2.4)); +#82513 = VECTOR('',#82514,1.); +#82514 = DIRECTION('',(-0.,-0.,-1.)); +#82515 = PLANE('',#82516); +#82516 = AXIS2_PLACEMENT_3D('',#82517,#82518,#82519); +#82517 = CARTESIAN_POINT('',(0.45,-0.45,2.4)); +#82518 = DIRECTION('',(1.,0.,0.)); +#82519 = DIRECTION('',(-0.,1.,0.)); +#82520 = ADVANCED_FACE('',(#82521),#82539,.T.); +#82521 = FACE_BOUND('',#82522,.T.); +#82522 = EDGE_LOOP('',(#82523,#82524,#82525,#82533)); +#82523 = ORIENTED_EDGE('',*,*,#81573,.F.); +#82524 = ORIENTED_EDGE('',*,*,#82510,.T.); +#82525 = ORIENTED_EDGE('',*,*,#82526,.T.); +#82526 = EDGE_CURVE('',#82503,#82527,#82529,.T.); +#82527 = VERTEX_POINT('',#82528); +#82528 = CARTESIAN_POINT('',(-0.45,0.45,-3.5)); +#82529 = LINE('',#82530,#82531); +#82530 = CARTESIAN_POINT('',(0.45,0.45,-3.5)); +#82531 = VECTOR('',#82532,1.); +#82532 = DIRECTION('',(-1.,0.,0.)); +#82533 = ORIENTED_EDGE('',*,*,#82534,.F.); +#82534 = EDGE_CURVE('',#81566,#82527,#82535,.T.); +#82535 = LINE('',#82536,#82537); +#82536 = CARTESIAN_POINT('',(-0.45,0.45,2.4)); +#82537 = VECTOR('',#82538,1.); +#82538 = DIRECTION('',(-0.,-0.,-1.)); +#82539 = PLANE('',#82540); +#82540 = AXIS2_PLACEMENT_3D('',#82541,#82542,#82543); +#82541 = CARTESIAN_POINT('',(0.45,0.45,2.4)); +#82542 = DIRECTION('',(0.,1.,-0.)); +#82543 = DIRECTION('',(-1.,0.,0.)); +#82544 = ADVANCED_FACE('',(#82545),#82556,.T.); +#82545 = FACE_BOUND('',#82546,.T.); +#82546 = EDGE_LOOP('',(#82547,#82548,#82549,#82555)); +#82547 = ORIENTED_EDGE('',*,*,#81565,.F.); +#82548 = ORIENTED_EDGE('',*,*,#82534,.T.); +#82549 = ORIENTED_EDGE('',*,*,#82550,.T.); +#82550 = EDGE_CURVE('',#82527,#82471,#82551,.T.); +#82551 = LINE('',#82552,#82553); +#82552 = CARTESIAN_POINT('',(-0.45,0.45,-3.5)); +#82553 = VECTOR('',#82554,1.); +#82554 = DIRECTION('',(0.,-1.,0.)); +#82555 = ORIENTED_EDGE('',*,*,#82470,.F.); +#82556 = PLANE('',#82557); +#82557 = AXIS2_PLACEMENT_3D('',#82558,#82559,#82560); +#82558 = CARTESIAN_POINT('',(-0.45,0.45,2.4)); +#82559 = DIRECTION('',(-1.,0.,0.)); +#82560 = DIRECTION('',(0.,-1.,0.)); +#82561 = ADVANCED_FACE('',(#82562),#82578,.F.); +#82562 = FACE_BOUND('',#82563,.F.); +#82563 = EDGE_LOOP('',(#82564,#82570,#82571,#82577)); +#82564 = ORIENTED_EDGE('',*,*,#82565,.T.); +#82565 = EDGE_CURVE('',#81596,#81892,#82566,.T.); +#82566 = LINE('',#82567,#82568); +#82567 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#82568 = VECTOR('',#82569,1.); +#82569 = DIRECTION('',(1.,0.,0.)); +#82570 = ORIENTED_EDGE('',*,*,#81891,.T.); +#82571 = ORIENTED_EDGE('',*,*,#82572,.F.); +#82572 = EDGE_CURVE('',#81598,#81894,#82573,.T.); +#82573 = LINE('',#82574,#82575); +#82574 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#82575 = VECTOR('',#82576,1.); +#82576 = DIRECTION('',(1.,0.,0.)); +#82577 = ORIENTED_EDGE('',*,*,#81595,.F.); +#82578 = PLANE('',#82579); +#82579 = AXIS2_PLACEMENT_3D('',#82580,#82581,#82582); +#82580 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#82581 = DIRECTION('',(0.,0.973616310568,-0.228191322789)); +#82582 = DIRECTION('',(0.,-0.228191322789,-0.973616310568)); +#82583 = ADVANCED_FACE('',(#82584,#82595,#82606,#82617,#82628,#82639), + #82650,.F.); +#82584 = FACE_BOUND('',#82585,.F.); +#82585 = EDGE_LOOP('',(#82586,#82587,#82593,#82594)); +#82586 = ORIENTED_EDGE('',*,*,#81659,.F.); +#82587 = ORIENTED_EDGE('',*,*,#82588,.T.); +#82588 = EDGE_CURVE('',#81652,#81941,#82589,.T.); +#82589 = LINE('',#82590,#82591); +#82590 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#82591 = VECTOR('',#82592,1.); +#82592 = DIRECTION('',(1.,0.,0.)); +#82593 = ORIENTED_EDGE('',*,*,#81948,.T.); +#82594 = ORIENTED_EDGE('',*,*,#82565,.F.); +#82595 = FACE_BOUND('',#82596,.F.); +#82596 = EDGE_LOOP('',(#82597)); +#82597 = ORIENTED_EDGE('',*,*,#82598,.T.); +#82598 = EDGE_CURVE('',#82599,#82599,#82601,.T.); +#82599 = VERTEX_POINT('',#82600); +#82600 = CARTESIAN_POINT('',(22.,-0.2,13.8)); +#82601 = CIRCLE('',#82602,2.); +#82602 = AXIS2_PLACEMENT_3D('',#82603,#82604,#82605); +#82603 = CARTESIAN_POINT('',(20.,-0.2,13.8)); +#82604 = DIRECTION('',(0.,0.,1.)); +#82605 = DIRECTION('',(1.,0.,-0.)); +#82606 = FACE_BOUND('',#82607,.F.); +#82607 = EDGE_LOOP('',(#82608)); +#82608 = ORIENTED_EDGE('',*,*,#82609,.T.); +#82609 = EDGE_CURVE('',#82610,#82610,#82612,.T.); +#82610 = VERTEX_POINT('',#82611); +#82611 = CARTESIAN_POINT('',(17.,-0.2,13.8)); +#82612 = CIRCLE('',#82613,2.); +#82613 = AXIS2_PLACEMENT_3D('',#82614,#82615,#82616); +#82614 = CARTESIAN_POINT('',(15.,-0.2,13.8)); +#82615 = DIRECTION('',(0.,0.,1.)); +#82616 = DIRECTION('',(1.,0.,-0.)); +#82617 = FACE_BOUND('',#82618,.F.); +#82618 = EDGE_LOOP('',(#82619)); +#82619 = ORIENTED_EDGE('',*,*,#82620,.T.); +#82620 = EDGE_CURVE('',#82621,#82621,#82623,.T.); +#82621 = VERTEX_POINT('',#82622); +#82622 = CARTESIAN_POINT('',(12.,-0.2,13.8)); +#82623 = CIRCLE('',#82624,2.); +#82624 = AXIS2_PLACEMENT_3D('',#82625,#82626,#82627); +#82625 = CARTESIAN_POINT('',(10.,-0.2,13.8)); +#82626 = DIRECTION('',(0.,0.,1.)); +#82627 = DIRECTION('',(1.,0.,-0.)); +#82628 = FACE_BOUND('',#82629,.F.); +#82629 = EDGE_LOOP('',(#82630)); +#82630 = ORIENTED_EDGE('',*,*,#82631,.T.); +#82631 = EDGE_CURVE('',#82632,#82632,#82634,.T.); +#82632 = VERTEX_POINT('',#82633); +#82633 = CARTESIAN_POINT('',(7.,-0.2,13.8)); +#82634 = CIRCLE('',#82635,2.); +#82635 = AXIS2_PLACEMENT_3D('',#82636,#82637,#82638); +#82636 = CARTESIAN_POINT('',(5.,-0.2,13.8)); +#82637 = DIRECTION('',(0.,0.,1.)); +#82638 = DIRECTION('',(1.,0.,-0.)); +#82639 = FACE_BOUND('',#82640,.F.); +#82640 = EDGE_LOOP('',(#82641)); +#82641 = ORIENTED_EDGE('',*,*,#82642,.T.); +#82642 = EDGE_CURVE('',#82643,#82643,#82645,.T.); +#82643 = VERTEX_POINT('',#82644); +#82644 = CARTESIAN_POINT('',(2.,-0.2,13.8)); +#82645 = CIRCLE('',#82646,2.); +#82646 = AXIS2_PLACEMENT_3D('',#82647,#82648,#82649); +#82647 = CARTESIAN_POINT('',(0.,-0.2,13.8)); +#82648 = DIRECTION('',(0.,0.,1.)); +#82649 = DIRECTION('',(1.,0.,-0.)); +#82650 = PLANE('',#82651); +#82651 = AXIS2_PLACEMENT_3D('',#82652,#82653,#82654); +#82652 = CARTESIAN_POINT('',(-2.5,5.2,13.8)); +#82653 = DIRECTION('',(0.,0.,-1.)); +#82654 = DIRECTION('',(0.,-1.,0.)); +#82655 = ADVANCED_FACE('',(#82656),#82662,.T.); +#82656 = FACE_BOUND('',#82657,.T.); +#82657 = EDGE_LOOP('',(#82658,#82659,#82660,#82661)); +#82658 = ORIENTED_EDGE('',*,*,#82588,.T.); +#82659 = ORIENTED_EDGE('',*,*,#81940,.T.); +#82660 = ORIENTED_EDGE('',*,*,#82071,.F.); +#82661 = ORIENTED_EDGE('',*,*,#81651,.F.); +#82662 = PLANE('',#82663); +#82663 = AXIS2_PLACEMENT_3D('',#82664,#82665,#82666); +#82664 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#82665 = DIRECTION('',(-0.,0.951026496518,0.309109370483)); +#82666 = DIRECTION('',(0.,0.309109370483,-0.951026496518)); +#82667 = ADVANCED_FACE('',(#82668),#82674,.T.); +#82668 = FACE_BOUND('',#82669,.T.); +#82669 = EDGE_LOOP('',(#82670,#82671,#82672,#82673)); +#82670 = ORIENTED_EDGE('',*,*,#82011,.T.); +#82671 = ORIENTED_EDGE('',*,*,#81970,.T.); +#82672 = ORIENTED_EDGE('',*,*,#81875,.T.); +#82673 = ORIENTED_EDGE('',*,*,#81628,.T.); +#82674 = PLANE('',#82675); +#82675 = AXIS2_PLACEMENT_3D('',#82676,#82677,#82678); +#82676 = CARTESIAN_POINT('',(-2.928091935206,-3.6,7.)); +#82677 = DIRECTION('',(0.,0.,1.)); +#82678 = DIRECTION('',(1.,0.,-0.)); +#82679 = ADVANCED_FACE('',(#82680),#82686,.F.); +#82680 = FACE_BOUND('',#82681,.F.); +#82681 = EDGE_LOOP('',(#82682,#82683,#82684,#82685)); +#82682 = ORIENTED_EDGE('',*,*,#82572,.T.); +#82683 = ORIENTED_EDGE('',*,*,#81901,.T.); +#82684 = ORIENTED_EDGE('',*,*,#81674,.F.); +#82685 = ORIENTED_EDGE('',*,*,#81605,.F.); +#82686 = PLANE('',#82687); +#82687 = AXIS2_PLACEMENT_3D('',#82688,#82689,#82690); +#82688 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#82689 = DIRECTION('',(0.,0.,-1.)); +#82690 = DIRECTION('',(0.,-1.,0.)); +#82691 = ADVANCED_FACE('',(#82692),#82715,.F.); +#82692 = FACE_BOUND('',#82693,.F.); +#82693 = EDGE_LOOP('',(#82694,#82704,#82709,#82710)); +#82694 = ORIENTED_EDGE('',*,*,#82695,.T.); +#82695 = EDGE_CURVE('',#82696,#82698,#82700,.T.); +#82696 = VERTEX_POINT('',#82697); +#82697 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82698 = VERTEX_POINT('',#82699); +#82699 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82700 = LINE('',#82701,#82702); +#82701 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82702 = VECTOR('',#82703,1.); +#82703 = DIRECTION('',(1.,0.,0.)); +#82704 = ORIENTED_EDGE('',*,*,#82705,.T.); +#82705 = EDGE_CURVE('',#82698,#81692,#82706,.T.); +#82706 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82707,#82708),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82707 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82708 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#82709 = ORIENTED_EDGE('',*,*,#81691,.T.); +#82710 = ORIENTED_EDGE('',*,*,#82711,.F.); +#82711 = EDGE_CURVE('',#82696,#81694,#82712,.T.); +#82712 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82713,#82714),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82713 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82714 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#82715 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82716,#82717) + ,(#82718,#82719 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82716 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82717 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#82718 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82719 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#82720 = ADVANCED_FACE('',(#82721),#82738,.F.); +#82721 = FACE_BOUND('',#82722,.F.); +#82722 = EDGE_LOOP('',(#82723,#82731,#82736,#82737)); +#82723 = ORIENTED_EDGE('',*,*,#82724,.T.); +#82724 = EDGE_CURVE('',#82698,#82725,#82727,.T.); +#82725 = VERTEX_POINT('',#82726); +#82726 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82727 = LINE('',#82728,#82729); +#82728 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82729 = VECTOR('',#82730,1.); +#82730 = DIRECTION('',(0.,0.,1.)); +#82731 = ORIENTED_EDGE('',*,*,#82732,.T.); +#82732 = EDGE_CURVE('',#82725,#81702,#82733,.T.); +#82733 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82734,#82735),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82734 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82735 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#82736 = ORIENTED_EDGE('',*,*,#81701,.T.); +#82737 = ORIENTED_EDGE('',*,*,#82705,.F.); +#82738 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82739,#82740) + ,(#82741,#82742 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82739 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82740 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#82741 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82742 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#82743 = ADVANCED_FACE('',(#82744),#82761,.F.); +#82744 = FACE_BOUND('',#82745,.F.); +#82745 = EDGE_LOOP('',(#82746,#82754,#82755,#82756)); +#82746 = ORIENTED_EDGE('',*,*,#82747,.T.); +#82747 = EDGE_CURVE('',#82748,#82696,#82750,.T.); +#82748 = VERTEX_POINT('',#82749); +#82749 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82750 = LINE('',#82751,#82752); +#82751 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82752 = VECTOR('',#82753,1.); +#82753 = DIRECTION('',(0.,0.,-1.)); +#82754 = ORIENTED_EDGE('',*,*,#82711,.T.); +#82755 = ORIENTED_EDGE('',*,*,#81717,.T.); +#82756 = ORIENTED_EDGE('',*,*,#82757,.F.); +#82757 = EDGE_CURVE('',#82748,#81710,#82758,.T.); +#82758 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82759,#82760),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82759 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82760 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#82761 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82762,#82763) + ,(#82764,#82765 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82762 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82763 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#82764 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82765 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#82766 = ADVANCED_FACE('',(#82767),#82778,.F.); +#82767 = FACE_BOUND('',#82768,.F.); +#82768 = EDGE_LOOP('',(#82769,#82775,#82776,#82777)); +#82769 = ORIENTED_EDGE('',*,*,#82770,.T.); +#82770 = EDGE_CURVE('',#82725,#82748,#82771,.T.); +#82771 = LINE('',#82772,#82773); +#82772 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82773 = VECTOR('',#82774,1.); +#82774 = DIRECTION('',(-1.,0.,0.)); +#82775 = ORIENTED_EDGE('',*,*,#82757,.T.); +#82776 = ORIENTED_EDGE('',*,*,#81709,.T.); +#82777 = ORIENTED_EDGE('',*,*,#82732,.F.); +#82778 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82779,#82780) + ,(#82781,#82782 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82779 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82780 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#82781 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82782 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#82783 = ADVANCED_FACE('',(#82784),#82807,.F.); +#82784 = FACE_BOUND('',#82785,.F.); +#82785 = EDGE_LOOP('',(#82786,#82796,#82801,#82802)); +#82786 = ORIENTED_EDGE('',*,*,#82787,.T.); +#82787 = EDGE_CURVE('',#82788,#82790,#82792,.T.); +#82788 = VERTEX_POINT('',#82789); +#82789 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82790 = VERTEX_POINT('',#82791); +#82791 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82792 = LINE('',#82793,#82794); +#82793 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82794 = VECTOR('',#82795,1.); +#82795 = DIRECTION('',(1.,0.,0.)); +#82796 = ORIENTED_EDGE('',*,*,#82797,.T.); +#82797 = EDGE_CURVE('',#82790,#81726,#82798,.T.); +#82798 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82799,#82800),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82799 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82800 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#82801 = ORIENTED_EDGE('',*,*,#81725,.T.); +#82802 = ORIENTED_EDGE('',*,*,#82803,.F.); +#82803 = EDGE_CURVE('',#82788,#81728,#82804,.T.); +#82804 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82805,#82806),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82805 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82806 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#82807 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82808,#82809) + ,(#82810,#82811 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82808 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82809 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#82810 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82811 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#82812 = ADVANCED_FACE('',(#82813),#82830,.F.); +#82813 = FACE_BOUND('',#82814,.F.); +#82814 = EDGE_LOOP('',(#82815,#82823,#82828,#82829)); +#82815 = ORIENTED_EDGE('',*,*,#82816,.T.); +#82816 = EDGE_CURVE('',#82790,#82817,#82819,.T.); +#82817 = VERTEX_POINT('',#82818); +#82818 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82819 = LINE('',#82820,#82821); +#82820 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82821 = VECTOR('',#82822,1.); +#82822 = DIRECTION('',(0.,0.,1.)); +#82823 = ORIENTED_EDGE('',*,*,#82824,.T.); +#82824 = EDGE_CURVE('',#82817,#81736,#82825,.T.); +#82825 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82826,#82827),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82826 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82827 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#82828 = ORIENTED_EDGE('',*,*,#81735,.T.); +#82829 = ORIENTED_EDGE('',*,*,#82797,.F.); +#82830 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82831,#82832) + ,(#82833,#82834 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82831 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82832 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#82833 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82834 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#82835 = ADVANCED_FACE('',(#82836),#82853,.F.); +#82836 = FACE_BOUND('',#82837,.F.); +#82837 = EDGE_LOOP('',(#82838,#82846,#82847,#82848)); +#82838 = ORIENTED_EDGE('',*,*,#82839,.T.); +#82839 = EDGE_CURVE('',#82840,#82788,#82842,.T.); +#82840 = VERTEX_POINT('',#82841); +#82841 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82842 = LINE('',#82843,#82844); +#82843 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82844 = VECTOR('',#82845,1.); +#82845 = DIRECTION('',(0.,0.,-1.)); +#82846 = ORIENTED_EDGE('',*,*,#82803,.T.); +#82847 = ORIENTED_EDGE('',*,*,#81751,.T.); +#82848 = ORIENTED_EDGE('',*,*,#82849,.F.); +#82849 = EDGE_CURVE('',#82840,#81744,#82850,.T.); +#82850 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82851,#82852),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82851 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82852 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#82853 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82854,#82855) + ,(#82856,#82857 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82854 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82855 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#82856 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82857 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#82858 = ADVANCED_FACE('',(#82859),#82870,.F.); +#82859 = FACE_BOUND('',#82860,.F.); +#82860 = EDGE_LOOP('',(#82861,#82867,#82868,#82869)); +#82861 = ORIENTED_EDGE('',*,*,#82862,.T.); +#82862 = EDGE_CURVE('',#82817,#82840,#82863,.T.); +#82863 = LINE('',#82864,#82865); +#82864 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82865 = VECTOR('',#82866,1.); +#82866 = DIRECTION('',(-1.,0.,0.)); +#82867 = ORIENTED_EDGE('',*,*,#82849,.T.); +#82868 = ORIENTED_EDGE('',*,*,#81743,.T.); +#82869 = ORIENTED_EDGE('',*,*,#82824,.F.); +#82870 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82871,#82872) + ,(#82873,#82874 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82871 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82872 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#82873 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82874 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#82875 = ADVANCED_FACE('',(#82876),#82899,.F.); +#82876 = FACE_BOUND('',#82877,.F.); +#82877 = EDGE_LOOP('',(#82878,#82888,#82893,#82894)); +#82878 = ORIENTED_EDGE('',*,*,#82879,.T.); +#82879 = EDGE_CURVE('',#82880,#82882,#82884,.T.); +#82880 = VERTEX_POINT('',#82881); +#82881 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82882 = VERTEX_POINT('',#82883); +#82883 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82884 = LINE('',#82885,#82886); +#82885 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82886 = VECTOR('',#82887,1.); +#82887 = DIRECTION('',(1.,0.,0.)); +#82888 = ORIENTED_EDGE('',*,*,#82889,.T.); +#82889 = EDGE_CURVE('',#82882,#81760,#82890,.T.); +#82890 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82891,#82892),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82891 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82892 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#82893 = ORIENTED_EDGE('',*,*,#81759,.T.); +#82894 = ORIENTED_EDGE('',*,*,#82895,.F.); +#82895 = EDGE_CURVE('',#82880,#81762,#82896,.T.); +#82896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82897,#82898),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82897 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82898 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#82899 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82900,#82901) + ,(#82902,#82903 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82900 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82901 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#82902 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82903 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#82904 = ADVANCED_FACE('',(#82905),#82922,.F.); +#82905 = FACE_BOUND('',#82906,.F.); +#82906 = EDGE_LOOP('',(#82907,#82915,#82920,#82921)); +#82907 = ORIENTED_EDGE('',*,*,#82908,.T.); +#82908 = EDGE_CURVE('',#82882,#82909,#82911,.T.); +#82909 = VERTEX_POINT('',#82910); +#82910 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82911 = LINE('',#82912,#82913); +#82912 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82913 = VECTOR('',#82914,1.); +#82914 = DIRECTION('',(0.,0.,1.)); +#82915 = ORIENTED_EDGE('',*,*,#82916,.T.); +#82916 = EDGE_CURVE('',#82909,#81770,#82917,.T.); +#82917 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82918,#82919),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82918 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82919 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#82920 = ORIENTED_EDGE('',*,*,#81769,.T.); +#82921 = ORIENTED_EDGE('',*,*,#82889,.F.); +#82922 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82923,#82924) + ,(#82925,#82926 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82923 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82924 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#82925 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82926 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#82927 = ADVANCED_FACE('',(#82928),#82945,.F.); +#82928 = FACE_BOUND('',#82929,.F.); +#82929 = EDGE_LOOP('',(#82930,#82938,#82939,#82940)); +#82930 = ORIENTED_EDGE('',*,*,#82931,.T.); +#82931 = EDGE_CURVE('',#82932,#82880,#82934,.T.); +#82932 = VERTEX_POINT('',#82933); +#82933 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82934 = LINE('',#82935,#82936); +#82935 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82936 = VECTOR('',#82937,1.); +#82937 = DIRECTION('',(0.,0.,-1.)); +#82938 = ORIENTED_EDGE('',*,*,#82895,.T.); +#82939 = ORIENTED_EDGE('',*,*,#81785,.T.); +#82940 = ORIENTED_EDGE('',*,*,#82941,.F.); +#82941 = EDGE_CURVE('',#82932,#81778,#82942,.T.); +#82942 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82943,#82944),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82943 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82944 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#82945 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82946,#82947) + ,(#82948,#82949 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82946 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82947 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#82948 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82949 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#82950 = ADVANCED_FACE('',(#82951),#82962,.F.); +#82951 = FACE_BOUND('',#82952,.F.); +#82952 = EDGE_LOOP('',(#82953,#82959,#82960,#82961)); +#82953 = ORIENTED_EDGE('',*,*,#82954,.T.); +#82954 = EDGE_CURVE('',#82909,#82932,#82955,.T.); +#82955 = LINE('',#82956,#82957); +#82956 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82957 = VECTOR('',#82958,1.); +#82958 = DIRECTION('',(-1.,0.,0.)); +#82959 = ORIENTED_EDGE('',*,*,#82941,.T.); +#82960 = ORIENTED_EDGE('',*,*,#81777,.T.); +#82961 = ORIENTED_EDGE('',*,*,#82916,.F.); +#82962 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82963,#82964) + ,(#82965,#82966 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82963 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82964 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#82965 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82966 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#82967 = ADVANCED_FACE('',(#82968),#82991,.F.); +#82968 = FACE_BOUND('',#82969,.F.); +#82969 = EDGE_LOOP('',(#82970,#82980,#82985,#82986)); +#82970 = ORIENTED_EDGE('',*,*,#82971,.T.); +#82971 = EDGE_CURVE('',#82972,#82974,#82976,.T.); +#82972 = VERTEX_POINT('',#82973); +#82973 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82974 = VERTEX_POINT('',#82975); +#82975 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#82976 = LINE('',#82977,#82978); +#82977 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82978 = VECTOR('',#82979,1.); +#82979 = DIRECTION('',(1.,0.,0.)); +#82980 = ORIENTED_EDGE('',*,*,#82981,.T.); +#82981 = EDGE_CURVE('',#82974,#81794,#82982,.T.); +#82982 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82983,#82984),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82983 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#82984 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#82985 = ORIENTED_EDGE('',*,*,#81793,.T.); +#82986 = ORIENTED_EDGE('',*,*,#82987,.F.); +#82987 = EDGE_CURVE('',#82972,#81796,#82988,.T.); +#82988 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82989,#82990),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82989 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82990 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#82991 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82992,#82993) + ,(#82994,#82995 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82992 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82993 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#82994 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#82995 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#82996 = ADVANCED_FACE('',(#82997),#83014,.F.); +#82997 = FACE_BOUND('',#82998,.F.); +#82998 = EDGE_LOOP('',(#82999,#83007,#83012,#83013)); +#82999 = ORIENTED_EDGE('',*,*,#83000,.T.); +#83000 = EDGE_CURVE('',#82974,#83001,#83003,.T.); +#83001 = VERTEX_POINT('',#83002); +#83002 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83003 = LINE('',#83004,#83005); +#83004 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#83005 = VECTOR('',#83006,1.); +#83006 = DIRECTION('',(0.,0.,1.)); +#83007 = ORIENTED_EDGE('',*,*,#83008,.T.); +#83008 = EDGE_CURVE('',#83001,#81804,#83009,.T.); +#83009 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83010,#83011),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83010 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83011 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#83012 = ORIENTED_EDGE('',*,*,#81803,.T.); +#83013 = ORIENTED_EDGE('',*,*,#82981,.F.); +#83014 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83015,#83016) + ,(#83017,#83018 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83015 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#83016 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#83017 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83018 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#83019 = ADVANCED_FACE('',(#83020),#83037,.F.); +#83020 = FACE_BOUND('',#83021,.F.); +#83021 = EDGE_LOOP('',(#83022,#83030,#83031,#83032)); +#83022 = ORIENTED_EDGE('',*,*,#83023,.T.); +#83023 = EDGE_CURVE('',#83024,#82972,#83026,.T.); +#83024 = VERTEX_POINT('',#83025); +#83025 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83026 = LINE('',#83027,#83028); +#83027 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83028 = VECTOR('',#83029,1.); +#83029 = DIRECTION('',(0.,0.,-1.)); +#83030 = ORIENTED_EDGE('',*,*,#82987,.T.); +#83031 = ORIENTED_EDGE('',*,*,#81819,.T.); +#83032 = ORIENTED_EDGE('',*,*,#83033,.F.); +#83033 = EDGE_CURVE('',#83024,#81812,#83034,.T.); +#83034 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83035,#83036),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83035 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83036 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#83037 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83038,#83039) + ,(#83040,#83041 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83038 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83039 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#83040 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#83041 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#83042 = ADVANCED_FACE('',(#83043),#83054,.F.); +#83043 = FACE_BOUND('',#83044,.F.); +#83044 = EDGE_LOOP('',(#83045,#83051,#83052,#83053)); +#83045 = ORIENTED_EDGE('',*,*,#83046,.T.); +#83046 = EDGE_CURVE('',#83001,#83024,#83047,.T.); +#83047 = LINE('',#83048,#83049); +#83048 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83049 = VECTOR('',#83050,1.); +#83050 = DIRECTION('',(-1.,0.,0.)); +#83051 = ORIENTED_EDGE('',*,*,#83033,.T.); +#83052 = ORIENTED_EDGE('',*,*,#81811,.T.); +#83053 = ORIENTED_EDGE('',*,*,#83008,.F.); +#83054 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83055,#83056) + ,(#83057,#83058 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83055 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83056 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#83057 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83058 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#83059 = ADVANCED_FACE('',(#83060),#83083,.F.); +#83060 = FACE_BOUND('',#83061,.F.); +#83061 = EDGE_LOOP('',(#83062,#83072,#83077,#83078)); +#83062 = ORIENTED_EDGE('',*,*,#83063,.T.); +#83063 = EDGE_CURVE('',#83064,#83066,#83068,.T.); +#83064 = VERTEX_POINT('',#83065); +#83065 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83066 = VERTEX_POINT('',#83067); +#83067 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83068 = LINE('',#83069,#83070); +#83069 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83070 = VECTOR('',#83071,1.); +#83071 = DIRECTION('',(1.,0.,0.)); +#83072 = ORIENTED_EDGE('',*,*,#83073,.T.); +#83073 = EDGE_CURVE('',#83066,#81828,#83074,.T.); +#83074 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83075,#83076),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83075 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83076 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#83077 = ORIENTED_EDGE('',*,*,#81827,.T.); +#83078 = ORIENTED_EDGE('',*,*,#83079,.F.); +#83079 = EDGE_CURVE('',#83064,#81830,#83080,.T.); +#83080 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83081,#83082),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83081 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83082 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#83083 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83084,#83085) + ,(#83086,#83087 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83084 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83085 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#83086 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83087 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#83088 = ADVANCED_FACE('',(#83089),#83106,.F.); +#83089 = FACE_BOUND('',#83090,.F.); +#83090 = EDGE_LOOP('',(#83091,#83099,#83104,#83105)); +#83091 = ORIENTED_EDGE('',*,*,#83092,.T.); +#83092 = EDGE_CURVE('',#83066,#83093,#83095,.T.); +#83093 = VERTEX_POINT('',#83094); +#83094 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83095 = LINE('',#83096,#83097); +#83096 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83097 = VECTOR('',#83098,1.); +#83098 = DIRECTION('',(0.,0.,1.)); +#83099 = ORIENTED_EDGE('',*,*,#83100,.T.); +#83100 = EDGE_CURVE('',#83093,#81838,#83101,.T.); +#83101 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83102,#83103),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83102 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83103 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#83104 = ORIENTED_EDGE('',*,*,#81837,.T.); +#83105 = ORIENTED_EDGE('',*,*,#83073,.F.); +#83106 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83107,#83108) + ,(#83109,#83110 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83107 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83108 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#83109 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83110 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#83111 = ADVANCED_FACE('',(#83112),#83129,.F.); +#83112 = FACE_BOUND('',#83113,.F.); +#83113 = EDGE_LOOP('',(#83114,#83122,#83123,#83124)); +#83114 = ORIENTED_EDGE('',*,*,#83115,.T.); +#83115 = EDGE_CURVE('',#83116,#83064,#83118,.T.); +#83116 = VERTEX_POINT('',#83117); +#83117 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83118 = LINE('',#83119,#83120); +#83119 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83120 = VECTOR('',#83121,1.); +#83121 = DIRECTION('',(0.,0.,-1.)); +#83122 = ORIENTED_EDGE('',*,*,#83079,.T.); +#83123 = ORIENTED_EDGE('',*,*,#81853,.T.); +#83124 = ORIENTED_EDGE('',*,*,#83125,.F.); +#83125 = EDGE_CURVE('',#83116,#81846,#83126,.T.); +#83126 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83127,#83128),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83127 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83128 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#83129 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83130,#83131) + ,(#83132,#83133 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83130 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83131 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#83132 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83133 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#83134 = ADVANCED_FACE('',(#83135),#83146,.F.); +#83135 = FACE_BOUND('',#83136,.F.); +#83136 = EDGE_LOOP('',(#83137,#83143,#83144,#83145)); +#83137 = ORIENTED_EDGE('',*,*,#83138,.T.); +#83138 = EDGE_CURVE('',#83093,#83116,#83139,.T.); +#83139 = LINE('',#83140,#83141); +#83140 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83141 = VECTOR('',#83142,1.); +#83142 = DIRECTION('',(-1.,0.,0.)); +#83143 = ORIENTED_EDGE('',*,*,#83125,.T.); +#83144 = ORIENTED_EDGE('',*,*,#81845,.T.); +#83145 = ORIENTED_EDGE('',*,*,#83100,.F.); +#83146 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83147,#83148) + ,(#83149,#83150 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83147 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83148 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#83149 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83150 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#83151 = ADVANCED_FACE('',(#83152),#83158,.F.); +#83152 = FACE_BOUND('',#83153,.F.); +#83153 = EDGE_LOOP('',(#83154,#83155,#83156,#83157)); +#83154 = ORIENTED_EDGE('',*,*,#82052,.T.); +#83155 = ORIENTED_EDGE('',*,*,#82035,.T.); +#83156 = ORIENTED_EDGE('',*,*,#81994,.T.); +#83157 = ORIENTED_EDGE('',*,*,#81917,.T.); +#83158 = PLANE('',#83159); +#83159 = AXIS2_PLACEMENT_3D('',#83160,#83161,#83162); +#83160 = CARTESIAN_POINT('',(22.071908064794,-3.6,7.)); +#83161 = DIRECTION('',(0.,0.,1.)); +#83162 = DIRECTION('',(1.,0.,-0.)); +#83163 = ADVANCED_FACE('',(#83164),#83170,.F.); +#83164 = FACE_BOUND('',#83165,.F.); +#83165 = EDGE_LOOP('',(#83166,#83167,#83168,#83169)); +#83166 = ORIENTED_EDGE('',*,*,#82094,.T.); +#83167 = ORIENTED_EDGE('',*,*,#82118,.T.); +#83168 = ORIENTED_EDGE('',*,*,#82142,.T.); +#83169 = ORIENTED_EDGE('',*,*,#82166,.T.); +#83170 = PLANE('',#83171); +#83171 = AXIS2_PLACEMENT_3D('',#83172,#83173,#83174); +#83172 = CARTESIAN_POINT('',(20.,0.,-3.5)); +#83173 = DIRECTION('',(0.,0.,1.)); +#83174 = DIRECTION('',(1.,0.,-0.)); +#83175 = ADVANCED_FACE('',(#83176),#83182,.F.); +#83176 = FACE_BOUND('',#83177,.F.); +#83177 = EDGE_LOOP('',(#83178,#83179,#83180,#83181)); +#83178 = ORIENTED_EDGE('',*,*,#82190,.T.); +#83179 = ORIENTED_EDGE('',*,*,#82214,.T.); +#83180 = ORIENTED_EDGE('',*,*,#82238,.T.); +#83181 = ORIENTED_EDGE('',*,*,#82262,.T.); +#83182 = PLANE('',#83183); +#83183 = AXIS2_PLACEMENT_3D('',#83184,#83185,#83186); +#83184 = CARTESIAN_POINT('',(15.,0.,-3.5)); +#83185 = DIRECTION('',(0.,0.,1.)); +#83186 = DIRECTION('',(1.,0.,-0.)); +#83187 = ADVANCED_FACE('',(#83188),#83194,.F.); +#83188 = FACE_BOUND('',#83189,.F.); +#83189 = EDGE_LOOP('',(#83190,#83191,#83192,#83193)); +#83190 = ORIENTED_EDGE('',*,*,#82286,.T.); +#83191 = ORIENTED_EDGE('',*,*,#82310,.T.); +#83192 = ORIENTED_EDGE('',*,*,#82334,.T.); +#83193 = ORIENTED_EDGE('',*,*,#82358,.T.); +#83194 = PLANE('',#83195); +#83195 = AXIS2_PLACEMENT_3D('',#83196,#83197,#83198); +#83196 = CARTESIAN_POINT('',(10.,0.,-3.5)); +#83197 = DIRECTION('',(0.,0.,1.)); +#83198 = DIRECTION('',(1.,0.,-0.)); +#83199 = ADVANCED_FACE('',(#83200),#83206,.F.); +#83200 = FACE_BOUND('',#83201,.F.); +#83201 = EDGE_LOOP('',(#83202,#83203,#83204,#83205)); +#83202 = ORIENTED_EDGE('',*,*,#82382,.T.); +#83203 = ORIENTED_EDGE('',*,*,#82406,.T.); +#83204 = ORIENTED_EDGE('',*,*,#82430,.T.); +#83205 = ORIENTED_EDGE('',*,*,#82454,.T.); +#83206 = PLANE('',#83207); +#83207 = AXIS2_PLACEMENT_3D('',#83208,#83209,#83210); +#83208 = CARTESIAN_POINT('',(5.,0.,-3.5)); +#83209 = DIRECTION('',(0.,0.,1.)); +#83210 = DIRECTION('',(1.,0.,-0.)); +#83211 = ADVANCED_FACE('',(#83212),#83218,.F.); +#83212 = FACE_BOUND('',#83213,.F.); +#83213 = EDGE_LOOP('',(#83214,#83215,#83216,#83217)); +#83214 = ORIENTED_EDGE('',*,*,#82478,.T.); +#83215 = ORIENTED_EDGE('',*,*,#82502,.T.); +#83216 = ORIENTED_EDGE('',*,*,#82526,.T.); +#83217 = ORIENTED_EDGE('',*,*,#82550,.T.); +#83218 = PLANE('',#83219); +#83219 = AXIS2_PLACEMENT_3D('',#83220,#83221,#83222); +#83220 = CARTESIAN_POINT('',(0.,0.,-3.5)); +#83221 = DIRECTION('',(0.,0.,1.)); +#83222 = DIRECTION('',(1.,0.,-0.)); +#83223 = ADVANCED_FACE('',(#83224),#83329,.F.); +#83224 = FACE_BOUND('',#83225,.F.); +#83225 = EDGE_LOOP('',(#83226,#83234,#83235,#83236,#83245,#83253,#83262, + #83270,#83279,#83287,#83296,#83305,#83314,#83322)); +#83226 = ORIENTED_EDGE('',*,*,#83227,.F.); +#83227 = EDGE_CURVE('',#82599,#83228,#83230,.T.); +#83228 = VERTEX_POINT('',#83229); +#83229 = CARTESIAN_POINT('',(22.,-0.2,2.4)); +#83230 = LINE('',#83231,#83232); +#83231 = CARTESIAN_POINT('',(22.,-0.2,13.8)); +#83232 = VECTOR('',#83233,1.); +#83233 = DIRECTION('',(-0.,-0.,-1.)); +#83234 = ORIENTED_EDGE('',*,*,#82598,.F.); +#83235 = ORIENTED_EDGE('',*,*,#83227,.T.); +#83236 = ORIENTED_EDGE('',*,*,#83237,.T.); +#83237 = EDGE_CURVE('',#83228,#83238,#83240,.T.); +#83238 = VERTEX_POINT('',#83239); +#83239 = CARTESIAN_POINT('',(21.4,1.228285685709,2.4)); +#83240 = CIRCLE('',#83241,2.); +#83241 = AXIS2_PLACEMENT_3D('',#83242,#83243,#83244); +#83242 = CARTESIAN_POINT('',(20.,-0.2,2.4)); +#83243 = DIRECTION('',(0.,0.,1.)); +#83244 = DIRECTION('',(1.,0.,-0.)); +#83245 = ORIENTED_EDGE('',*,*,#83246,.T.); +#83246 = EDGE_CURVE('',#83238,#83247,#83249,.T.); +#83247 = VERTEX_POINT('',#83248); +#83248 = CARTESIAN_POINT('',(21.4,1.228285685709,5.1)); +#83249 = LINE('',#83250,#83251); +#83250 = CARTESIAN_POINT('',(21.4,1.228285685709,13.8)); +#83251 = VECTOR('',#83252,1.); +#83252 = DIRECTION('',(0.,0.,1.)); +#83253 = ORIENTED_EDGE('',*,*,#83254,.T.); +#83254 = EDGE_CURVE('',#83247,#83255,#83257,.T.); +#83255 = VERTEX_POINT('',#83256); +#83256 = CARTESIAN_POINT('',(18.6,1.228285685709,5.1)); +#83257 = CIRCLE('',#83258,2.); +#83258 = AXIS2_PLACEMENT_3D('',#83259,#83260,#83261); +#83259 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83260 = DIRECTION('',(0.,0.,1.)); +#83261 = DIRECTION('',(1.,0.,-0.)); +#83262 = ORIENTED_EDGE('',*,*,#83263,.F.); +#83263 = EDGE_CURVE('',#83264,#83255,#83266,.T.); +#83264 = VERTEX_POINT('',#83265); +#83265 = CARTESIAN_POINT('',(18.6,1.228285685709,2.4)); +#83266 = LINE('',#83267,#83268); +#83267 = CARTESIAN_POINT('',(18.6,1.228285685709,13.8)); +#83268 = VECTOR('',#83269,1.); +#83269 = DIRECTION('',(0.,0.,1.)); +#83270 = ORIENTED_EDGE('',*,*,#83271,.T.); +#83271 = EDGE_CURVE('',#83264,#83272,#83274,.T.); +#83272 = VERTEX_POINT('',#83273); +#83273 = CARTESIAN_POINT('',(18.6,-1.628285685709,2.4)); +#83274 = CIRCLE('',#83275,2.); +#83275 = AXIS2_PLACEMENT_3D('',#83276,#83277,#83278); +#83276 = CARTESIAN_POINT('',(20.,-0.2,2.4)); +#83277 = DIRECTION('',(0.,0.,1.)); +#83278 = DIRECTION('',(1.,0.,-0.)); +#83279 = ORIENTED_EDGE('',*,*,#83280,.T.); +#83280 = EDGE_CURVE('',#83272,#83281,#83283,.T.); +#83281 = VERTEX_POINT('',#83282); +#83282 = CARTESIAN_POINT('',(18.6,-1.628285685709,5.1)); +#83283 = LINE('',#83284,#83285); +#83284 = CARTESIAN_POINT('',(18.6,-1.628285685709,13.8)); +#83285 = VECTOR('',#83286,1.); +#83286 = DIRECTION('',(0.,0.,1.)); +#83287 = ORIENTED_EDGE('',*,*,#83288,.T.); +#83288 = EDGE_CURVE('',#83281,#83289,#83291,.T.); +#83289 = VERTEX_POINT('',#83290); +#83290 = CARTESIAN_POINT('',(19.128220211292,-2.,5.1)); +#83291 = CIRCLE('',#83292,2.); +#83292 = AXIS2_PLACEMENT_3D('',#83293,#83294,#83295); +#83293 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83294 = DIRECTION('',(0.,0.,1.)); +#83295 = DIRECTION('',(1.,0.,-0.)); +#83296 = ORIENTED_EDGE('',*,*,#83297,.T.); +#83297 = EDGE_CURVE('',#83289,#83298,#83300,.T.); +#83298 = VERTEX_POINT('',#83299); +#83299 = CARTESIAN_POINT('',(20.871779788708,-2.,5.1)); +#83300 = CIRCLE('',#83301,2.); +#83301 = AXIS2_PLACEMENT_3D('',#83302,#83303,#83304); +#83302 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83303 = DIRECTION('',(0.,0.,1.)); +#83304 = DIRECTION('',(1.,0.,-0.)); +#83305 = ORIENTED_EDGE('',*,*,#83306,.T.); +#83306 = EDGE_CURVE('',#83298,#83307,#83309,.T.); +#83307 = VERTEX_POINT('',#83308); +#83308 = CARTESIAN_POINT('',(21.4,-1.628285685709,5.1)); +#83309 = CIRCLE('',#83310,2.); +#83310 = AXIS2_PLACEMENT_3D('',#83311,#83312,#83313); +#83311 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83312 = DIRECTION('',(0.,0.,1.)); +#83313 = DIRECTION('',(1.,0.,-0.)); +#83314 = ORIENTED_EDGE('',*,*,#83315,.F.); +#83315 = EDGE_CURVE('',#83316,#83307,#83318,.T.); +#83316 = VERTEX_POINT('',#83317); +#83317 = CARTESIAN_POINT('',(21.4,-1.628285685709,2.4)); +#83318 = LINE('',#83319,#83320); +#83319 = CARTESIAN_POINT('',(21.4,-1.628285685709,13.8)); +#83320 = VECTOR('',#83321,1.); +#83321 = DIRECTION('',(0.,0.,1.)); +#83322 = ORIENTED_EDGE('',*,*,#83323,.T.); +#83323 = EDGE_CURVE('',#83316,#83228,#83324,.T.); +#83324 = CIRCLE('',#83325,2.); +#83325 = AXIS2_PLACEMENT_3D('',#83326,#83327,#83328); +#83326 = CARTESIAN_POINT('',(20.,-0.2,2.4)); +#83327 = DIRECTION('',(0.,0.,1.)); +#83328 = DIRECTION('',(1.,0.,-0.)); +#83329 = CYLINDRICAL_SURFACE('',#83330,2.); +#83330 = AXIS2_PLACEMENT_3D('',#83331,#83332,#83333); +#83331 = CARTESIAN_POINT('',(20.,-0.2,13.8)); +#83332 = DIRECTION('',(0.,0.,1.)); +#83333 = DIRECTION('',(1.,0.,-0.)); +#83334 = ADVANCED_FACE('',(#83335),#83440,.F.); +#83335 = FACE_BOUND('',#83336,.F.); +#83336 = EDGE_LOOP('',(#83337,#83345,#83346,#83347,#83356,#83364,#83373, + #83381,#83390,#83398,#83407,#83416,#83425,#83433)); +#83337 = ORIENTED_EDGE('',*,*,#83338,.F.); +#83338 = EDGE_CURVE('',#82610,#83339,#83341,.T.); +#83339 = VERTEX_POINT('',#83340); +#83340 = CARTESIAN_POINT('',(17.,-0.2,2.4)); +#83341 = LINE('',#83342,#83343); +#83342 = CARTESIAN_POINT('',(17.,-0.2,13.8)); +#83343 = VECTOR('',#83344,1.); +#83344 = DIRECTION('',(-0.,-0.,-1.)); +#83345 = ORIENTED_EDGE('',*,*,#82609,.F.); +#83346 = ORIENTED_EDGE('',*,*,#83338,.T.); +#83347 = ORIENTED_EDGE('',*,*,#83348,.T.); +#83348 = EDGE_CURVE('',#83339,#83349,#83351,.T.); +#83349 = VERTEX_POINT('',#83350); +#83350 = CARTESIAN_POINT('',(16.4,1.228285685709,2.4)); +#83351 = CIRCLE('',#83352,2.); +#83352 = AXIS2_PLACEMENT_3D('',#83353,#83354,#83355); +#83353 = CARTESIAN_POINT('',(15.,-0.2,2.4)); +#83354 = DIRECTION('',(0.,0.,1.)); +#83355 = DIRECTION('',(1.,0.,-0.)); +#83356 = ORIENTED_EDGE('',*,*,#83357,.T.); +#83357 = EDGE_CURVE('',#83349,#83358,#83360,.T.); +#83358 = VERTEX_POINT('',#83359); +#83359 = CARTESIAN_POINT('',(16.4,1.228285685709,5.1)); +#83360 = LINE('',#83361,#83362); +#83361 = CARTESIAN_POINT('',(16.4,1.228285685709,13.8)); +#83362 = VECTOR('',#83363,1.); +#83363 = DIRECTION('',(0.,0.,1.)); +#83364 = ORIENTED_EDGE('',*,*,#83365,.T.); +#83365 = EDGE_CURVE('',#83358,#83366,#83368,.T.); +#83366 = VERTEX_POINT('',#83367); +#83367 = CARTESIAN_POINT('',(13.6,1.228285685709,5.1)); +#83368 = CIRCLE('',#83369,2.); +#83369 = AXIS2_PLACEMENT_3D('',#83370,#83371,#83372); +#83370 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83371 = DIRECTION('',(0.,0.,1.)); +#83372 = DIRECTION('',(1.,0.,-0.)); +#83373 = ORIENTED_EDGE('',*,*,#83374,.F.); +#83374 = EDGE_CURVE('',#83375,#83366,#83377,.T.); +#83375 = VERTEX_POINT('',#83376); +#83376 = CARTESIAN_POINT('',(13.6,1.228285685709,2.4)); +#83377 = LINE('',#83378,#83379); +#83378 = CARTESIAN_POINT('',(13.6,1.228285685709,13.8)); +#83379 = VECTOR('',#83380,1.); +#83380 = DIRECTION('',(0.,0.,1.)); +#83381 = ORIENTED_EDGE('',*,*,#83382,.T.); +#83382 = EDGE_CURVE('',#83375,#83383,#83385,.T.); +#83383 = VERTEX_POINT('',#83384); +#83384 = CARTESIAN_POINT('',(13.6,-1.628285685709,2.4)); +#83385 = CIRCLE('',#83386,2.); +#83386 = AXIS2_PLACEMENT_3D('',#83387,#83388,#83389); +#83387 = CARTESIAN_POINT('',(15.,-0.2,2.4)); +#83388 = DIRECTION('',(0.,0.,1.)); +#83389 = DIRECTION('',(1.,0.,-0.)); +#83390 = ORIENTED_EDGE('',*,*,#83391,.T.); +#83391 = EDGE_CURVE('',#83383,#83392,#83394,.T.); +#83392 = VERTEX_POINT('',#83393); +#83393 = CARTESIAN_POINT('',(13.6,-1.628285685709,5.1)); +#83394 = LINE('',#83395,#83396); +#83395 = CARTESIAN_POINT('',(13.6,-1.628285685709,13.8)); +#83396 = VECTOR('',#83397,1.); +#83397 = DIRECTION('',(0.,0.,1.)); +#83398 = ORIENTED_EDGE('',*,*,#83399,.T.); +#83399 = EDGE_CURVE('',#83392,#83400,#83402,.T.); +#83400 = VERTEX_POINT('',#83401); +#83401 = CARTESIAN_POINT('',(14.128220211292,-2.,5.1)); +#83402 = CIRCLE('',#83403,2.); +#83403 = AXIS2_PLACEMENT_3D('',#83404,#83405,#83406); +#83404 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83405 = DIRECTION('',(0.,0.,1.)); +#83406 = DIRECTION('',(1.,0.,-0.)); +#83407 = ORIENTED_EDGE('',*,*,#83408,.T.); +#83408 = EDGE_CURVE('',#83400,#83409,#83411,.T.); +#83409 = VERTEX_POINT('',#83410); +#83410 = CARTESIAN_POINT('',(15.871779788708,-2.,5.1)); +#83411 = CIRCLE('',#83412,2.); +#83412 = AXIS2_PLACEMENT_3D('',#83413,#83414,#83415); +#83413 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83414 = DIRECTION('',(0.,0.,1.)); +#83415 = DIRECTION('',(1.,0.,-0.)); +#83416 = ORIENTED_EDGE('',*,*,#83417,.T.); +#83417 = EDGE_CURVE('',#83409,#83418,#83420,.T.); +#83418 = VERTEX_POINT('',#83419); +#83419 = CARTESIAN_POINT('',(16.4,-1.628285685709,5.1)); +#83420 = CIRCLE('',#83421,2.); +#83421 = AXIS2_PLACEMENT_3D('',#83422,#83423,#83424); +#83422 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83423 = DIRECTION('',(0.,0.,1.)); +#83424 = DIRECTION('',(1.,0.,-0.)); +#83425 = ORIENTED_EDGE('',*,*,#83426,.F.); +#83426 = EDGE_CURVE('',#83427,#83418,#83429,.T.); +#83427 = VERTEX_POINT('',#83428); +#83428 = CARTESIAN_POINT('',(16.4,-1.628285685709,2.4)); +#83429 = LINE('',#83430,#83431); +#83430 = CARTESIAN_POINT('',(16.4,-1.628285685709,13.8)); +#83431 = VECTOR('',#83432,1.); +#83432 = DIRECTION('',(0.,0.,1.)); +#83433 = ORIENTED_EDGE('',*,*,#83434,.T.); +#83434 = EDGE_CURVE('',#83427,#83339,#83435,.T.); +#83435 = CIRCLE('',#83436,2.); +#83436 = AXIS2_PLACEMENT_3D('',#83437,#83438,#83439); +#83437 = CARTESIAN_POINT('',(15.,-0.2,2.4)); +#83438 = DIRECTION('',(0.,0.,1.)); +#83439 = DIRECTION('',(1.,0.,-0.)); +#83440 = CYLINDRICAL_SURFACE('',#83441,2.); +#83441 = AXIS2_PLACEMENT_3D('',#83442,#83443,#83444); +#83442 = CARTESIAN_POINT('',(15.,-0.2,13.8)); +#83443 = DIRECTION('',(0.,0.,1.)); +#83444 = DIRECTION('',(1.,0.,-0.)); +#83445 = ADVANCED_FACE('',(#83446),#83551,.F.); +#83446 = FACE_BOUND('',#83447,.F.); +#83447 = EDGE_LOOP('',(#83448,#83456,#83457,#83458,#83467,#83475,#83484, + #83492,#83501,#83509,#83518,#83527,#83536,#83544)); +#83448 = ORIENTED_EDGE('',*,*,#83449,.F.); +#83449 = EDGE_CURVE('',#82621,#83450,#83452,.T.); +#83450 = VERTEX_POINT('',#83451); +#83451 = CARTESIAN_POINT('',(12.,-0.2,2.4)); +#83452 = LINE('',#83453,#83454); +#83453 = CARTESIAN_POINT('',(12.,-0.2,13.8)); +#83454 = VECTOR('',#83455,1.); +#83455 = DIRECTION('',(-0.,-0.,-1.)); +#83456 = ORIENTED_EDGE('',*,*,#82620,.F.); +#83457 = ORIENTED_EDGE('',*,*,#83449,.T.); +#83458 = ORIENTED_EDGE('',*,*,#83459,.T.); +#83459 = EDGE_CURVE('',#83450,#83460,#83462,.T.); +#83460 = VERTEX_POINT('',#83461); +#83461 = CARTESIAN_POINT('',(11.4,1.228285685709,2.4)); +#83462 = CIRCLE('',#83463,2.); +#83463 = AXIS2_PLACEMENT_3D('',#83464,#83465,#83466); +#83464 = CARTESIAN_POINT('',(10.,-0.2,2.4)); +#83465 = DIRECTION('',(0.,0.,1.)); +#83466 = DIRECTION('',(1.,0.,-0.)); +#83467 = ORIENTED_EDGE('',*,*,#83468,.T.); +#83468 = EDGE_CURVE('',#83460,#83469,#83471,.T.); +#83469 = VERTEX_POINT('',#83470); +#83470 = CARTESIAN_POINT('',(11.4,1.228285685709,5.1)); +#83471 = LINE('',#83472,#83473); +#83472 = CARTESIAN_POINT('',(11.4,1.228285685709,13.8)); +#83473 = VECTOR('',#83474,1.); +#83474 = DIRECTION('',(0.,0.,1.)); +#83475 = ORIENTED_EDGE('',*,*,#83476,.T.); +#83476 = EDGE_CURVE('',#83469,#83477,#83479,.T.); +#83477 = VERTEX_POINT('',#83478); +#83478 = CARTESIAN_POINT('',(8.6,1.228285685709,5.1)); +#83479 = CIRCLE('',#83480,2.); +#83480 = AXIS2_PLACEMENT_3D('',#83481,#83482,#83483); +#83481 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83482 = DIRECTION('',(0.,0.,1.)); +#83483 = DIRECTION('',(1.,0.,-0.)); +#83484 = ORIENTED_EDGE('',*,*,#83485,.F.); +#83485 = EDGE_CURVE('',#83486,#83477,#83488,.T.); +#83486 = VERTEX_POINT('',#83487); +#83487 = CARTESIAN_POINT('',(8.6,1.228285685709,2.4)); +#83488 = LINE('',#83489,#83490); +#83489 = CARTESIAN_POINT('',(8.6,1.228285685709,13.8)); +#83490 = VECTOR('',#83491,1.); +#83491 = DIRECTION('',(0.,0.,1.)); +#83492 = ORIENTED_EDGE('',*,*,#83493,.T.); +#83493 = EDGE_CURVE('',#83486,#83494,#83496,.T.); +#83494 = VERTEX_POINT('',#83495); +#83495 = CARTESIAN_POINT('',(8.6,-1.628285685709,2.4)); +#83496 = CIRCLE('',#83497,2.); +#83497 = AXIS2_PLACEMENT_3D('',#83498,#83499,#83500); +#83498 = CARTESIAN_POINT('',(10.,-0.2,2.4)); +#83499 = DIRECTION('',(0.,0.,1.)); +#83500 = DIRECTION('',(1.,0.,-0.)); +#83501 = ORIENTED_EDGE('',*,*,#83502,.T.); +#83502 = EDGE_CURVE('',#83494,#83503,#83505,.T.); +#83503 = VERTEX_POINT('',#83504); +#83504 = CARTESIAN_POINT('',(8.6,-1.628285685709,5.1)); +#83505 = LINE('',#83506,#83507); +#83506 = CARTESIAN_POINT('',(8.6,-1.628285685709,13.8)); +#83507 = VECTOR('',#83508,1.); +#83508 = DIRECTION('',(0.,0.,1.)); +#83509 = ORIENTED_EDGE('',*,*,#83510,.T.); +#83510 = EDGE_CURVE('',#83503,#83511,#83513,.T.); +#83511 = VERTEX_POINT('',#83512); +#83512 = CARTESIAN_POINT('',(9.128220211292,-2.,5.1)); +#83513 = CIRCLE('',#83514,2.); +#83514 = AXIS2_PLACEMENT_3D('',#83515,#83516,#83517); +#83515 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83516 = DIRECTION('',(0.,0.,1.)); +#83517 = DIRECTION('',(1.,0.,-0.)); +#83518 = ORIENTED_EDGE('',*,*,#83519,.T.); +#83519 = EDGE_CURVE('',#83511,#83520,#83522,.T.); +#83520 = VERTEX_POINT('',#83521); +#83521 = CARTESIAN_POINT('',(10.871779788708,-2.,5.1)); +#83522 = CIRCLE('',#83523,2.); +#83523 = AXIS2_PLACEMENT_3D('',#83524,#83525,#83526); +#83524 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83525 = DIRECTION('',(0.,0.,1.)); +#83526 = DIRECTION('',(1.,0.,-0.)); +#83527 = ORIENTED_EDGE('',*,*,#83528,.T.); +#83528 = EDGE_CURVE('',#83520,#83529,#83531,.T.); +#83529 = VERTEX_POINT('',#83530); +#83530 = CARTESIAN_POINT('',(11.4,-1.628285685709,5.1)); +#83531 = CIRCLE('',#83532,2.); +#83532 = AXIS2_PLACEMENT_3D('',#83533,#83534,#83535); +#83533 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83534 = DIRECTION('',(0.,0.,1.)); +#83535 = DIRECTION('',(1.,0.,-0.)); +#83536 = ORIENTED_EDGE('',*,*,#83537,.F.); +#83537 = EDGE_CURVE('',#83538,#83529,#83540,.T.); +#83538 = VERTEX_POINT('',#83539); +#83539 = CARTESIAN_POINT('',(11.4,-1.628285685709,2.4)); +#83540 = LINE('',#83541,#83542); +#83541 = CARTESIAN_POINT('',(11.4,-1.628285685709,13.8)); +#83542 = VECTOR('',#83543,1.); +#83543 = DIRECTION('',(0.,0.,1.)); +#83544 = ORIENTED_EDGE('',*,*,#83545,.T.); +#83545 = EDGE_CURVE('',#83538,#83450,#83546,.T.); +#83546 = CIRCLE('',#83547,2.); +#83547 = AXIS2_PLACEMENT_3D('',#83548,#83549,#83550); +#83548 = CARTESIAN_POINT('',(10.,-0.2,2.4)); +#83549 = DIRECTION('',(0.,0.,1.)); +#83550 = DIRECTION('',(1.,0.,-0.)); +#83551 = CYLINDRICAL_SURFACE('',#83552,2.); +#83552 = AXIS2_PLACEMENT_3D('',#83553,#83554,#83555); +#83553 = CARTESIAN_POINT('',(10.,-0.2,13.8)); +#83554 = DIRECTION('',(0.,0.,1.)); +#83555 = DIRECTION('',(1.,0.,-0.)); +#83556 = ADVANCED_FACE('',(#83557),#83662,.F.); +#83557 = FACE_BOUND('',#83558,.F.); +#83558 = EDGE_LOOP('',(#83559,#83567,#83568,#83569,#83578,#83586,#83595, + #83603,#83612,#83620,#83629,#83638,#83647,#83655)); +#83559 = ORIENTED_EDGE('',*,*,#83560,.F.); +#83560 = EDGE_CURVE('',#82632,#83561,#83563,.T.); +#83561 = VERTEX_POINT('',#83562); +#83562 = CARTESIAN_POINT('',(7.,-0.2,2.4)); +#83563 = LINE('',#83564,#83565); +#83564 = CARTESIAN_POINT('',(7.,-0.2,13.8)); +#83565 = VECTOR('',#83566,1.); +#83566 = DIRECTION('',(-0.,-0.,-1.)); +#83567 = ORIENTED_EDGE('',*,*,#82631,.F.); +#83568 = ORIENTED_EDGE('',*,*,#83560,.T.); +#83569 = ORIENTED_EDGE('',*,*,#83570,.T.); +#83570 = EDGE_CURVE('',#83561,#83571,#83573,.T.); +#83571 = VERTEX_POINT('',#83572); +#83572 = CARTESIAN_POINT('',(6.4,1.228285685709,2.4)); +#83573 = CIRCLE('',#83574,2.); +#83574 = AXIS2_PLACEMENT_3D('',#83575,#83576,#83577); +#83575 = CARTESIAN_POINT('',(5.,-0.2,2.4)); +#83576 = DIRECTION('',(0.,0.,1.)); +#83577 = DIRECTION('',(1.,0.,-0.)); +#83578 = ORIENTED_EDGE('',*,*,#83579,.T.); +#83579 = EDGE_CURVE('',#83571,#83580,#83582,.T.); +#83580 = VERTEX_POINT('',#83581); +#83581 = CARTESIAN_POINT('',(6.4,1.228285685709,5.1)); +#83582 = LINE('',#83583,#83584); +#83583 = CARTESIAN_POINT('',(6.4,1.228285685709,13.8)); +#83584 = VECTOR('',#83585,1.); +#83585 = DIRECTION('',(0.,0.,1.)); +#83586 = ORIENTED_EDGE('',*,*,#83587,.T.); +#83587 = EDGE_CURVE('',#83580,#83588,#83590,.T.); +#83588 = VERTEX_POINT('',#83589); +#83589 = CARTESIAN_POINT('',(3.6,1.228285685709,5.1)); +#83590 = CIRCLE('',#83591,2.); +#83591 = AXIS2_PLACEMENT_3D('',#83592,#83593,#83594); +#83592 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83593 = DIRECTION('',(0.,0.,1.)); +#83594 = DIRECTION('',(1.,0.,-0.)); +#83595 = ORIENTED_EDGE('',*,*,#83596,.F.); +#83596 = EDGE_CURVE('',#83597,#83588,#83599,.T.); +#83597 = VERTEX_POINT('',#83598); +#83598 = CARTESIAN_POINT('',(3.6,1.228285685709,2.4)); +#83599 = LINE('',#83600,#83601); +#83600 = CARTESIAN_POINT('',(3.6,1.228285685709,13.8)); +#83601 = VECTOR('',#83602,1.); +#83602 = DIRECTION('',(0.,0.,1.)); +#83603 = ORIENTED_EDGE('',*,*,#83604,.T.); +#83604 = EDGE_CURVE('',#83597,#83605,#83607,.T.); +#83605 = VERTEX_POINT('',#83606); +#83606 = CARTESIAN_POINT('',(3.6,-1.628285685709,2.4)); +#83607 = CIRCLE('',#83608,2.); +#83608 = AXIS2_PLACEMENT_3D('',#83609,#83610,#83611); +#83609 = CARTESIAN_POINT('',(5.,-0.2,2.4)); +#83610 = DIRECTION('',(0.,0.,1.)); +#83611 = DIRECTION('',(1.,0.,-0.)); +#83612 = ORIENTED_EDGE('',*,*,#83613,.T.); +#83613 = EDGE_CURVE('',#83605,#83614,#83616,.T.); +#83614 = VERTEX_POINT('',#83615); +#83615 = CARTESIAN_POINT('',(3.6,-1.628285685709,5.1)); +#83616 = LINE('',#83617,#83618); +#83617 = CARTESIAN_POINT('',(3.6,-1.628285685709,13.8)); +#83618 = VECTOR('',#83619,1.); +#83619 = DIRECTION('',(0.,0.,1.)); +#83620 = ORIENTED_EDGE('',*,*,#83621,.T.); +#83621 = EDGE_CURVE('',#83614,#83622,#83624,.T.); +#83622 = VERTEX_POINT('',#83623); +#83623 = CARTESIAN_POINT('',(4.128220211292,-2.,5.1)); +#83624 = CIRCLE('',#83625,2.); +#83625 = AXIS2_PLACEMENT_3D('',#83626,#83627,#83628); +#83626 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83627 = DIRECTION('',(0.,0.,1.)); +#83628 = DIRECTION('',(1.,0.,-0.)); +#83629 = ORIENTED_EDGE('',*,*,#83630,.T.); +#83630 = EDGE_CURVE('',#83622,#83631,#83633,.T.); +#83631 = VERTEX_POINT('',#83632); +#83632 = CARTESIAN_POINT('',(5.871779788708,-2.,5.1)); +#83633 = CIRCLE('',#83634,2.); +#83634 = AXIS2_PLACEMENT_3D('',#83635,#83636,#83637); +#83635 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83636 = DIRECTION('',(0.,0.,1.)); +#83637 = DIRECTION('',(1.,0.,-0.)); +#83638 = ORIENTED_EDGE('',*,*,#83639,.T.); +#83639 = EDGE_CURVE('',#83631,#83640,#83642,.T.); +#83640 = VERTEX_POINT('',#83641); +#83641 = CARTESIAN_POINT('',(6.4,-1.628285685709,5.1)); +#83642 = CIRCLE('',#83643,2.); +#83643 = AXIS2_PLACEMENT_3D('',#83644,#83645,#83646); +#83644 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83645 = DIRECTION('',(0.,0.,1.)); +#83646 = DIRECTION('',(1.,0.,-0.)); +#83647 = ORIENTED_EDGE('',*,*,#83648,.F.); +#83648 = EDGE_CURVE('',#83649,#83640,#83651,.T.); +#83649 = VERTEX_POINT('',#83650); +#83650 = CARTESIAN_POINT('',(6.4,-1.628285685709,2.4)); +#83651 = LINE('',#83652,#83653); +#83652 = CARTESIAN_POINT('',(6.4,-1.628285685709,13.8)); +#83653 = VECTOR('',#83654,1.); +#83654 = DIRECTION('',(0.,0.,1.)); +#83655 = ORIENTED_EDGE('',*,*,#83656,.T.); +#83656 = EDGE_CURVE('',#83649,#83561,#83657,.T.); +#83657 = CIRCLE('',#83658,2.); +#83658 = AXIS2_PLACEMENT_3D('',#83659,#83660,#83661); +#83659 = CARTESIAN_POINT('',(5.,-0.2,2.4)); +#83660 = DIRECTION('',(0.,0.,1.)); +#83661 = DIRECTION('',(1.,0.,-0.)); +#83662 = CYLINDRICAL_SURFACE('',#83663,2.); +#83663 = AXIS2_PLACEMENT_3D('',#83664,#83665,#83666); +#83664 = CARTESIAN_POINT('',(5.,-0.2,13.8)); +#83665 = DIRECTION('',(0.,0.,1.)); +#83666 = DIRECTION('',(1.,0.,-0.)); +#83667 = ADVANCED_FACE('',(#83668),#83773,.F.); +#83668 = FACE_BOUND('',#83669,.F.); +#83669 = EDGE_LOOP('',(#83670,#83678,#83679,#83680,#83689,#83697,#83706, + #83714,#83723,#83731,#83740,#83749,#83758,#83766)); +#83670 = ORIENTED_EDGE('',*,*,#83671,.F.); +#83671 = EDGE_CURVE('',#82643,#83672,#83674,.T.); +#83672 = VERTEX_POINT('',#83673); +#83673 = CARTESIAN_POINT('',(2.,-0.2,2.4)); +#83674 = LINE('',#83675,#83676); +#83675 = CARTESIAN_POINT('',(2.,-0.2,13.8)); +#83676 = VECTOR('',#83677,1.); +#83677 = DIRECTION('',(-0.,-0.,-1.)); +#83678 = ORIENTED_EDGE('',*,*,#82642,.F.); +#83679 = ORIENTED_EDGE('',*,*,#83671,.T.); +#83680 = ORIENTED_EDGE('',*,*,#83681,.T.); +#83681 = EDGE_CURVE('',#83672,#83682,#83684,.T.); +#83682 = VERTEX_POINT('',#83683); +#83683 = CARTESIAN_POINT('',(1.4,1.228285685709,2.4)); +#83684 = CIRCLE('',#83685,2.); +#83685 = AXIS2_PLACEMENT_3D('',#83686,#83687,#83688); +#83686 = CARTESIAN_POINT('',(0.,-0.2,2.4)); +#83687 = DIRECTION('',(0.,0.,1.)); +#83688 = DIRECTION('',(1.,0.,-0.)); +#83689 = ORIENTED_EDGE('',*,*,#83690,.T.); +#83690 = EDGE_CURVE('',#83682,#83691,#83693,.T.); +#83691 = VERTEX_POINT('',#83692); +#83692 = CARTESIAN_POINT('',(1.4,1.228285685709,5.1)); +#83693 = LINE('',#83694,#83695); +#83694 = CARTESIAN_POINT('',(1.4,1.228285685709,13.8)); +#83695 = VECTOR('',#83696,1.); +#83696 = DIRECTION('',(0.,0.,1.)); +#83697 = ORIENTED_EDGE('',*,*,#83698,.T.); +#83698 = EDGE_CURVE('',#83691,#83699,#83701,.T.); +#83699 = VERTEX_POINT('',#83700); +#83700 = CARTESIAN_POINT('',(-1.4,1.228285685709,5.1)); +#83701 = CIRCLE('',#83702,2.); +#83702 = AXIS2_PLACEMENT_3D('',#83703,#83704,#83705); +#83703 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83704 = DIRECTION('',(0.,0.,1.)); +#83705 = DIRECTION('',(1.,0.,-0.)); +#83706 = ORIENTED_EDGE('',*,*,#83707,.F.); +#83707 = EDGE_CURVE('',#83708,#83699,#83710,.T.); +#83708 = VERTEX_POINT('',#83709); +#83709 = CARTESIAN_POINT('',(-1.4,1.228285685709,2.4)); +#83710 = LINE('',#83711,#83712); +#83711 = CARTESIAN_POINT('',(-1.4,1.228285685709,13.8)); +#83712 = VECTOR('',#83713,1.); +#83713 = DIRECTION('',(0.,0.,1.)); +#83714 = ORIENTED_EDGE('',*,*,#83715,.T.); +#83715 = EDGE_CURVE('',#83708,#83716,#83718,.T.); +#83716 = VERTEX_POINT('',#83717); +#83717 = CARTESIAN_POINT('',(-1.4,-1.628285685709,2.4)); +#83718 = CIRCLE('',#83719,2.); +#83719 = AXIS2_PLACEMENT_3D('',#83720,#83721,#83722); +#83720 = CARTESIAN_POINT('',(0.,-0.2,2.4)); +#83721 = DIRECTION('',(0.,0.,1.)); +#83722 = DIRECTION('',(1.,0.,-0.)); +#83723 = ORIENTED_EDGE('',*,*,#83724,.T.); +#83724 = EDGE_CURVE('',#83716,#83725,#83727,.T.); +#83725 = VERTEX_POINT('',#83726); +#83726 = CARTESIAN_POINT('',(-1.4,-1.628285685709,5.1)); +#83727 = LINE('',#83728,#83729); +#83728 = CARTESIAN_POINT('',(-1.4,-1.628285685709,13.8)); +#83729 = VECTOR('',#83730,1.); +#83730 = DIRECTION('',(0.,0.,1.)); +#83731 = ORIENTED_EDGE('',*,*,#83732,.T.); +#83732 = EDGE_CURVE('',#83725,#83733,#83735,.T.); +#83733 = VERTEX_POINT('',#83734); +#83734 = CARTESIAN_POINT('',(-0.871779788708,-2.,5.1)); +#83735 = CIRCLE('',#83736,2.); +#83736 = AXIS2_PLACEMENT_3D('',#83737,#83738,#83739); +#83737 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83738 = DIRECTION('',(0.,0.,1.)); +#83739 = DIRECTION('',(1.,0.,-0.)); +#83740 = ORIENTED_EDGE('',*,*,#83741,.T.); +#83741 = EDGE_CURVE('',#83733,#83742,#83744,.T.); +#83742 = VERTEX_POINT('',#83743); +#83743 = CARTESIAN_POINT('',(0.871779788708,-2.,5.1)); +#83744 = CIRCLE('',#83745,2.); +#83745 = AXIS2_PLACEMENT_3D('',#83746,#83747,#83748); +#83746 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83747 = DIRECTION('',(0.,0.,1.)); +#83748 = DIRECTION('',(1.,0.,-0.)); +#83749 = ORIENTED_EDGE('',*,*,#83750,.T.); +#83750 = EDGE_CURVE('',#83742,#83751,#83753,.T.); +#83751 = VERTEX_POINT('',#83752); +#83752 = CARTESIAN_POINT('',(1.4,-1.628285685709,5.1)); +#83753 = CIRCLE('',#83754,2.); +#83754 = AXIS2_PLACEMENT_3D('',#83755,#83756,#83757); +#83755 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83756 = DIRECTION('',(0.,0.,1.)); +#83757 = DIRECTION('',(1.,0.,-0.)); +#83758 = ORIENTED_EDGE('',*,*,#83759,.F.); +#83759 = EDGE_CURVE('',#83760,#83751,#83762,.T.); +#83760 = VERTEX_POINT('',#83761); +#83761 = CARTESIAN_POINT('',(1.4,-1.628285685709,2.4)); +#83762 = LINE('',#83763,#83764); +#83763 = CARTESIAN_POINT('',(1.4,-1.628285685709,13.8)); +#83764 = VECTOR('',#83765,1.); +#83765 = DIRECTION('',(0.,0.,1.)); +#83766 = ORIENTED_EDGE('',*,*,#83767,.T.); +#83767 = EDGE_CURVE('',#83760,#83672,#83768,.T.); +#83768 = CIRCLE('',#83769,2.); +#83769 = AXIS2_PLACEMENT_3D('',#83770,#83771,#83772); +#83770 = CARTESIAN_POINT('',(0.,-0.2,2.4)); +#83771 = DIRECTION('',(0.,0.,1.)); +#83772 = DIRECTION('',(1.,0.,-0.)); +#83773 = CYLINDRICAL_SURFACE('',#83774,2.); +#83774 = AXIS2_PLACEMENT_3D('',#83775,#83776,#83777); +#83775 = CARTESIAN_POINT('',(0.,-0.2,13.8)); +#83776 = DIRECTION('',(0.,0.,1.)); +#83777 = DIRECTION('',(1.,0.,-0.)); +#83778 = ADVANCED_FACE('',(#83779),#83804,.F.); +#83779 = FACE_BOUND('',#83780,.F.); +#83780 = EDGE_LOOP('',(#83781,#83789,#83790,#83798)); +#83781 = ORIENTED_EDGE('',*,*,#83782,.F.); +#83782 = EDGE_CURVE('',#82698,#83783,#83785,.T.); +#83783 = VERTEX_POINT('',#83784); +#83784 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#83785 = LINE('',#83786,#83787); +#83786 = CARTESIAN_POINT('',(21.4,-104.6,2.4)); +#83787 = VECTOR('',#83788,1.); +#83788 = DIRECTION('',(-0.,1.,-0.)); +#83789 = ORIENTED_EDGE('',*,*,#82695,.F.); +#83790 = ORIENTED_EDGE('',*,*,#83791,.T.); +#83791 = EDGE_CURVE('',#82696,#83792,#83794,.T.); +#83792 = VERTEX_POINT('',#83793); +#83793 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#83794 = LINE('',#83795,#83796); +#83795 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#83796 = VECTOR('',#83797,1.); +#83797 = DIRECTION('',(-0.,1.,-0.)); +#83798 = ORIENTED_EDGE('',*,*,#83799,.T.); +#83799 = EDGE_CURVE('',#83792,#83783,#83800,.T.); +#83800 = LINE('',#83801,#83802); +#83801 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#83802 = VECTOR('',#83803,1.); +#83803 = DIRECTION('',(1.,0.,0.)); +#83804 = PLANE('',#83805); +#83805 = AXIS2_PLACEMENT_3D('',#83806,#83807,#83808); +#83806 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#83807 = DIRECTION('',(0.,0.,-1.)); +#83808 = DIRECTION('',(1.,0.,0.)); +#83809 = ADVANCED_FACE('',(#83810),#83828,.F.); +#83810 = FACE_BOUND('',#83811,.F.); +#83811 = EDGE_LOOP('',(#83812,#83820,#83821,#83822)); +#83812 = ORIENTED_EDGE('',*,*,#83813,.F.); +#83813 = EDGE_CURVE('',#82725,#83814,#83816,.T.); +#83814 = VERTEX_POINT('',#83815); +#83815 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#83816 = LINE('',#83817,#83818); +#83817 = CARTESIAN_POINT('',(21.4,-104.6,5.1)); +#83818 = VECTOR('',#83819,1.); +#83819 = DIRECTION('',(-0.,1.,-0.)); +#83820 = ORIENTED_EDGE('',*,*,#82724,.F.); +#83821 = ORIENTED_EDGE('',*,*,#83782,.T.); +#83822 = ORIENTED_EDGE('',*,*,#83823,.T.); +#83823 = EDGE_CURVE('',#83783,#83814,#83824,.T.); +#83824 = LINE('',#83825,#83826); +#83825 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#83826 = VECTOR('',#83827,1.); +#83827 = DIRECTION('',(0.,0.,1.)); +#83828 = PLANE('',#83829); +#83829 = AXIS2_PLACEMENT_3D('',#83830,#83831,#83832); +#83830 = CARTESIAN_POINT('',(21.4,-104.6,2.4)); +#83831 = DIRECTION('',(1.,0.,-0.)); +#83832 = DIRECTION('',(0.,0.,1.)); +#83833 = ADVANCED_FACE('',(#83834),#83852,.F.); +#83834 = FACE_BOUND('',#83835,.F.); +#83835 = EDGE_LOOP('',(#83836,#83837,#83838,#83846)); +#83836 = ORIENTED_EDGE('',*,*,#83791,.F.); +#83837 = ORIENTED_EDGE('',*,*,#82747,.F.); +#83838 = ORIENTED_EDGE('',*,*,#83839,.T.); +#83839 = EDGE_CURVE('',#82748,#83840,#83842,.T.); +#83840 = VERTEX_POINT('',#83841); +#83841 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#83842 = LINE('',#83843,#83844); +#83843 = CARTESIAN_POINT('',(18.6,-104.6,5.1)); +#83844 = VECTOR('',#83845,1.); +#83845 = DIRECTION('',(-0.,1.,-0.)); +#83846 = ORIENTED_EDGE('',*,*,#83847,.F.); +#83847 = EDGE_CURVE('',#83792,#83840,#83848,.T.); +#83848 = LINE('',#83849,#83850); +#83849 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#83850 = VECTOR('',#83851,1.); +#83851 = DIRECTION('',(0.,0.,1.)); +#83852 = PLANE('',#83853); +#83853 = AXIS2_PLACEMENT_3D('',#83854,#83855,#83856); +#83854 = CARTESIAN_POINT('',(18.6,-104.6,5.1)); +#83855 = DIRECTION('',(-1.,-0.,-0.)); +#83856 = DIRECTION('',(0.,0.,-1.)); +#83857 = ADVANCED_FACE('',(#83858),#83876,.F.); +#83858 = FACE_BOUND('',#83859,.F.); +#83859 = EDGE_LOOP('',(#83860,#83861,#83862,#83863,#83869,#83870)); +#83860 = ORIENTED_EDGE('',*,*,#83839,.F.); +#83861 = ORIENTED_EDGE('',*,*,#82770,.F.); +#83862 = ORIENTED_EDGE('',*,*,#83813,.T.); +#83863 = ORIENTED_EDGE('',*,*,#83864,.F.); +#83864 = EDGE_CURVE('',#83298,#83814,#83865,.T.); +#83865 = LINE('',#83866,#83867); +#83866 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#83867 = VECTOR('',#83868,1.); +#83868 = DIRECTION('',(1.,0.,0.)); +#83869 = ORIENTED_EDGE('',*,*,#83297,.F.); +#83870 = ORIENTED_EDGE('',*,*,#83871,.F.); +#83871 = EDGE_CURVE('',#83840,#83289,#83872,.T.); +#83872 = LINE('',#83873,#83874); +#83873 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#83874 = VECTOR('',#83875,1.); +#83875 = DIRECTION('',(1.,0.,0.)); +#83876 = PLANE('',#83877); +#83877 = AXIS2_PLACEMENT_3D('',#83878,#83879,#83880); +#83878 = CARTESIAN_POINT('',(21.4,-104.6,5.1)); +#83879 = DIRECTION('',(0.,0.,1.)); +#83880 = DIRECTION('',(-1.,0.,0.)); +#83881 = ADVANCED_FACE('',(#83882),#83907,.F.); +#83882 = FACE_BOUND('',#83883,.F.); +#83883 = EDGE_LOOP('',(#83884,#83892,#83893,#83901)); +#83884 = ORIENTED_EDGE('',*,*,#83885,.F.); +#83885 = EDGE_CURVE('',#82790,#83886,#83888,.T.); +#83886 = VERTEX_POINT('',#83887); +#83887 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#83888 = LINE('',#83889,#83890); +#83889 = CARTESIAN_POINT('',(16.4,-104.6,2.4)); +#83890 = VECTOR('',#83891,1.); +#83891 = DIRECTION('',(-0.,1.,-0.)); +#83892 = ORIENTED_EDGE('',*,*,#82787,.F.); +#83893 = ORIENTED_EDGE('',*,*,#83894,.T.); +#83894 = EDGE_CURVE('',#82788,#83895,#83897,.T.); +#83895 = VERTEX_POINT('',#83896); +#83896 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#83897 = LINE('',#83898,#83899); +#83898 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#83899 = VECTOR('',#83900,1.); +#83900 = DIRECTION('',(-0.,1.,-0.)); +#83901 = ORIENTED_EDGE('',*,*,#83902,.T.); +#83902 = EDGE_CURVE('',#83895,#83886,#83903,.T.); +#83903 = LINE('',#83904,#83905); +#83904 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#83905 = VECTOR('',#83906,1.); +#83906 = DIRECTION('',(1.,0.,0.)); +#83907 = PLANE('',#83908); +#83908 = AXIS2_PLACEMENT_3D('',#83909,#83910,#83911); +#83909 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#83910 = DIRECTION('',(0.,0.,-1.)); +#83911 = DIRECTION('',(1.,0.,0.)); +#83912 = ADVANCED_FACE('',(#83913),#83931,.F.); +#83913 = FACE_BOUND('',#83914,.F.); +#83914 = EDGE_LOOP('',(#83915,#83923,#83924,#83925)); +#83915 = ORIENTED_EDGE('',*,*,#83916,.F.); +#83916 = EDGE_CURVE('',#82817,#83917,#83919,.T.); +#83917 = VERTEX_POINT('',#83918); +#83918 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#83919 = LINE('',#83920,#83921); +#83920 = CARTESIAN_POINT('',(16.4,-104.6,5.1)); +#83921 = VECTOR('',#83922,1.); +#83922 = DIRECTION('',(-0.,1.,-0.)); +#83923 = ORIENTED_EDGE('',*,*,#82816,.F.); +#83924 = ORIENTED_EDGE('',*,*,#83885,.T.); +#83925 = ORIENTED_EDGE('',*,*,#83926,.T.); +#83926 = EDGE_CURVE('',#83886,#83917,#83927,.T.); +#83927 = LINE('',#83928,#83929); +#83928 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#83929 = VECTOR('',#83930,1.); +#83930 = DIRECTION('',(0.,0.,1.)); +#83931 = PLANE('',#83932); +#83932 = AXIS2_PLACEMENT_3D('',#83933,#83934,#83935); +#83933 = CARTESIAN_POINT('',(16.4,-104.6,2.4)); +#83934 = DIRECTION('',(1.,0.,-0.)); +#83935 = DIRECTION('',(0.,0.,1.)); +#83936 = ADVANCED_FACE('',(#83937),#83955,.F.); +#83937 = FACE_BOUND('',#83938,.F.); +#83938 = EDGE_LOOP('',(#83939,#83940,#83941,#83949)); +#83939 = ORIENTED_EDGE('',*,*,#83894,.F.); +#83940 = ORIENTED_EDGE('',*,*,#82839,.F.); +#83941 = ORIENTED_EDGE('',*,*,#83942,.T.); +#83942 = EDGE_CURVE('',#82840,#83943,#83945,.T.); +#83943 = VERTEX_POINT('',#83944); +#83944 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#83945 = LINE('',#83946,#83947); +#83946 = CARTESIAN_POINT('',(13.6,-104.6,5.1)); +#83947 = VECTOR('',#83948,1.); +#83948 = DIRECTION('',(-0.,1.,-0.)); +#83949 = ORIENTED_EDGE('',*,*,#83950,.F.); +#83950 = EDGE_CURVE('',#83895,#83943,#83951,.T.); +#83951 = LINE('',#83952,#83953); +#83952 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#83953 = VECTOR('',#83954,1.); +#83954 = DIRECTION('',(0.,0.,1.)); +#83955 = PLANE('',#83956); +#83956 = AXIS2_PLACEMENT_3D('',#83957,#83958,#83959); +#83957 = CARTESIAN_POINT('',(13.6,-104.6,5.1)); +#83958 = DIRECTION('',(-1.,-0.,-0.)); +#83959 = DIRECTION('',(0.,0.,-1.)); +#83960 = ADVANCED_FACE('',(#83961),#83979,.F.); +#83961 = FACE_BOUND('',#83962,.F.); +#83962 = EDGE_LOOP('',(#83963,#83964,#83965,#83966,#83972,#83973)); +#83963 = ORIENTED_EDGE('',*,*,#83942,.F.); +#83964 = ORIENTED_EDGE('',*,*,#82862,.F.); +#83965 = ORIENTED_EDGE('',*,*,#83916,.T.); +#83966 = ORIENTED_EDGE('',*,*,#83967,.F.); +#83967 = EDGE_CURVE('',#83409,#83917,#83968,.T.); +#83968 = LINE('',#83969,#83970); +#83969 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#83970 = VECTOR('',#83971,1.); +#83971 = DIRECTION('',(1.,0.,0.)); +#83972 = ORIENTED_EDGE('',*,*,#83408,.F.); +#83973 = ORIENTED_EDGE('',*,*,#83974,.F.); +#83974 = EDGE_CURVE('',#83943,#83400,#83975,.T.); +#83975 = LINE('',#83976,#83977); +#83976 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#83977 = VECTOR('',#83978,1.); +#83978 = DIRECTION('',(1.,0.,0.)); +#83979 = PLANE('',#83980); +#83980 = AXIS2_PLACEMENT_3D('',#83981,#83982,#83983); +#83981 = CARTESIAN_POINT('',(16.4,-104.6,5.1)); +#83982 = DIRECTION('',(0.,0.,1.)); +#83983 = DIRECTION('',(-1.,0.,0.)); +#83984 = ADVANCED_FACE('',(#83985),#84010,.F.); +#83985 = FACE_BOUND('',#83986,.F.); +#83986 = EDGE_LOOP('',(#83987,#83995,#83996,#84004)); +#83987 = ORIENTED_EDGE('',*,*,#83988,.F.); +#83988 = EDGE_CURVE('',#82882,#83989,#83991,.T.); +#83989 = VERTEX_POINT('',#83990); +#83990 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#83991 = LINE('',#83992,#83993); +#83992 = CARTESIAN_POINT('',(11.4,-104.6,2.4)); +#83993 = VECTOR('',#83994,1.); +#83994 = DIRECTION('',(-0.,1.,-0.)); +#83995 = ORIENTED_EDGE('',*,*,#82879,.F.); +#83996 = ORIENTED_EDGE('',*,*,#83997,.T.); +#83997 = EDGE_CURVE('',#82880,#83998,#84000,.T.); +#83998 = VERTEX_POINT('',#83999); +#83999 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#84000 = LINE('',#84001,#84002); +#84001 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84002 = VECTOR('',#84003,1.); +#84003 = DIRECTION('',(-0.,1.,-0.)); +#84004 = ORIENTED_EDGE('',*,*,#84005,.T.); +#84005 = EDGE_CURVE('',#83998,#83989,#84006,.T.); +#84006 = LINE('',#84007,#84008); +#84007 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#84008 = VECTOR('',#84009,1.); +#84009 = DIRECTION('',(1.,0.,0.)); +#84010 = PLANE('',#84011); +#84011 = AXIS2_PLACEMENT_3D('',#84012,#84013,#84014); +#84012 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84013 = DIRECTION('',(0.,0.,-1.)); +#84014 = DIRECTION('',(1.,0.,0.)); +#84015 = ADVANCED_FACE('',(#84016),#84034,.F.); +#84016 = FACE_BOUND('',#84017,.F.); +#84017 = EDGE_LOOP('',(#84018,#84026,#84027,#84028)); +#84018 = ORIENTED_EDGE('',*,*,#84019,.F.); +#84019 = EDGE_CURVE('',#82909,#84020,#84022,.T.); +#84020 = VERTEX_POINT('',#84021); +#84021 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84022 = LINE('',#84023,#84024); +#84023 = CARTESIAN_POINT('',(11.4,-104.6,5.1)); +#84024 = VECTOR('',#84025,1.); +#84025 = DIRECTION('',(-0.,1.,-0.)); +#84026 = ORIENTED_EDGE('',*,*,#82908,.F.); +#84027 = ORIENTED_EDGE('',*,*,#83988,.T.); +#84028 = ORIENTED_EDGE('',*,*,#84029,.T.); +#84029 = EDGE_CURVE('',#83989,#84020,#84030,.T.); +#84030 = LINE('',#84031,#84032); +#84031 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#84032 = VECTOR('',#84033,1.); +#84033 = DIRECTION('',(0.,0.,1.)); +#84034 = PLANE('',#84035); +#84035 = AXIS2_PLACEMENT_3D('',#84036,#84037,#84038); +#84036 = CARTESIAN_POINT('',(11.4,-104.6,2.4)); +#84037 = DIRECTION('',(1.,0.,-0.)); +#84038 = DIRECTION('',(0.,0.,1.)); +#84039 = ADVANCED_FACE('',(#84040),#84058,.F.); +#84040 = FACE_BOUND('',#84041,.F.); +#84041 = EDGE_LOOP('',(#84042,#84043,#84044,#84052)); +#84042 = ORIENTED_EDGE('',*,*,#83997,.F.); +#84043 = ORIENTED_EDGE('',*,*,#82931,.F.); +#84044 = ORIENTED_EDGE('',*,*,#84045,.T.); +#84045 = EDGE_CURVE('',#82932,#84046,#84048,.T.); +#84046 = VERTEX_POINT('',#84047); +#84047 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84048 = LINE('',#84049,#84050); +#84049 = CARTESIAN_POINT('',(8.6,-104.6,5.1)); +#84050 = VECTOR('',#84051,1.); +#84051 = DIRECTION('',(-0.,1.,-0.)); +#84052 = ORIENTED_EDGE('',*,*,#84053,.F.); +#84053 = EDGE_CURVE('',#83998,#84046,#84054,.T.); +#84054 = LINE('',#84055,#84056); +#84055 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#84056 = VECTOR('',#84057,1.); +#84057 = DIRECTION('',(0.,0.,1.)); +#84058 = PLANE('',#84059); +#84059 = AXIS2_PLACEMENT_3D('',#84060,#84061,#84062); +#84060 = CARTESIAN_POINT('',(8.6,-104.6,5.1)); +#84061 = DIRECTION('',(-1.,-0.,-0.)); +#84062 = DIRECTION('',(0.,0.,-1.)); +#84063 = ADVANCED_FACE('',(#84064),#84082,.F.); +#84064 = FACE_BOUND('',#84065,.F.); +#84065 = EDGE_LOOP('',(#84066,#84067,#84068,#84069,#84075,#84076)); +#84066 = ORIENTED_EDGE('',*,*,#84045,.F.); +#84067 = ORIENTED_EDGE('',*,*,#82954,.F.); +#84068 = ORIENTED_EDGE('',*,*,#84019,.T.); +#84069 = ORIENTED_EDGE('',*,*,#84070,.F.); +#84070 = EDGE_CURVE('',#83520,#84020,#84071,.T.); +#84071 = LINE('',#84072,#84073); +#84072 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84073 = VECTOR('',#84074,1.); +#84074 = DIRECTION('',(1.,0.,0.)); +#84075 = ORIENTED_EDGE('',*,*,#83519,.F.); +#84076 = ORIENTED_EDGE('',*,*,#84077,.F.); +#84077 = EDGE_CURVE('',#84046,#83511,#84078,.T.); +#84078 = LINE('',#84079,#84080); +#84079 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84080 = VECTOR('',#84081,1.); +#84081 = DIRECTION('',(1.,0.,0.)); +#84082 = PLANE('',#84083); +#84083 = AXIS2_PLACEMENT_3D('',#84084,#84085,#84086); +#84084 = CARTESIAN_POINT('',(11.4,-104.6,5.1)); +#84085 = DIRECTION('',(0.,0.,1.)); +#84086 = DIRECTION('',(-1.,0.,0.)); +#84087 = ADVANCED_FACE('',(#84088),#84113,.F.); +#84088 = FACE_BOUND('',#84089,.F.); +#84089 = EDGE_LOOP('',(#84090,#84098,#84099,#84107)); +#84090 = ORIENTED_EDGE('',*,*,#84091,.F.); +#84091 = EDGE_CURVE('',#82974,#84092,#84094,.T.); +#84092 = VERTEX_POINT('',#84093); +#84093 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84094 = LINE('',#84095,#84096); +#84095 = CARTESIAN_POINT('',(6.4,-104.6,2.4)); +#84096 = VECTOR('',#84097,1.); +#84097 = DIRECTION('',(-0.,1.,-0.)); +#84098 = ORIENTED_EDGE('',*,*,#82971,.F.); +#84099 = ORIENTED_EDGE('',*,*,#84100,.T.); +#84100 = EDGE_CURVE('',#82972,#84101,#84103,.T.); +#84101 = VERTEX_POINT('',#84102); +#84102 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#84103 = LINE('',#84104,#84105); +#84104 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84105 = VECTOR('',#84106,1.); +#84106 = DIRECTION('',(-0.,1.,-0.)); +#84107 = ORIENTED_EDGE('',*,*,#84108,.T.); +#84108 = EDGE_CURVE('',#84101,#84092,#84109,.T.); +#84109 = LINE('',#84110,#84111); +#84110 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#84111 = VECTOR('',#84112,1.); +#84112 = DIRECTION('',(1.,0.,0.)); +#84113 = PLANE('',#84114); +#84114 = AXIS2_PLACEMENT_3D('',#84115,#84116,#84117); +#84115 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84116 = DIRECTION('',(0.,0.,-1.)); +#84117 = DIRECTION('',(1.,0.,0.)); +#84118 = ADVANCED_FACE('',(#84119),#84137,.F.); +#84119 = FACE_BOUND('',#84120,.F.); +#84120 = EDGE_LOOP('',(#84121,#84129,#84130,#84131)); +#84121 = ORIENTED_EDGE('',*,*,#84122,.F.); +#84122 = EDGE_CURVE('',#83001,#84123,#84125,.T.); +#84123 = VERTEX_POINT('',#84124); +#84124 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84125 = LINE('',#84126,#84127); +#84126 = CARTESIAN_POINT('',(6.4,-104.6,5.1)); +#84127 = VECTOR('',#84128,1.); +#84128 = DIRECTION('',(-0.,1.,-0.)); +#84129 = ORIENTED_EDGE('',*,*,#83000,.F.); +#84130 = ORIENTED_EDGE('',*,*,#84091,.T.); +#84131 = ORIENTED_EDGE('',*,*,#84132,.T.); +#84132 = EDGE_CURVE('',#84092,#84123,#84133,.T.); +#84133 = LINE('',#84134,#84135); +#84134 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84135 = VECTOR('',#84136,1.); +#84136 = DIRECTION('',(0.,0.,1.)); +#84137 = PLANE('',#84138); +#84138 = AXIS2_PLACEMENT_3D('',#84139,#84140,#84141); +#84139 = CARTESIAN_POINT('',(6.4,-104.6,2.4)); +#84140 = DIRECTION('',(1.,0.,-0.)); +#84141 = DIRECTION('',(0.,0.,1.)); +#84142 = ADVANCED_FACE('',(#84143),#84161,.F.); +#84143 = FACE_BOUND('',#84144,.F.); +#84144 = EDGE_LOOP('',(#84145,#84146,#84147,#84155)); +#84145 = ORIENTED_EDGE('',*,*,#84100,.F.); +#84146 = ORIENTED_EDGE('',*,*,#83023,.F.); +#84147 = ORIENTED_EDGE('',*,*,#84148,.T.); +#84148 = EDGE_CURVE('',#83024,#84149,#84151,.T.); +#84149 = VERTEX_POINT('',#84150); +#84150 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84151 = LINE('',#84152,#84153); +#84152 = CARTESIAN_POINT('',(3.6,-104.6,5.1)); +#84153 = VECTOR('',#84154,1.); +#84154 = DIRECTION('',(-0.,1.,-0.)); +#84155 = ORIENTED_EDGE('',*,*,#84156,.F.); +#84156 = EDGE_CURVE('',#84101,#84149,#84157,.T.); +#84157 = LINE('',#84158,#84159); +#84158 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#84159 = VECTOR('',#84160,1.); +#84160 = DIRECTION('',(0.,0.,1.)); +#84161 = PLANE('',#84162); +#84162 = AXIS2_PLACEMENT_3D('',#84163,#84164,#84165); +#84163 = CARTESIAN_POINT('',(3.6,-104.6,5.1)); +#84164 = DIRECTION('',(-1.,-0.,-0.)); +#84165 = DIRECTION('',(0.,0.,-1.)); +#84166 = ADVANCED_FACE('',(#84167),#84185,.F.); +#84167 = FACE_BOUND('',#84168,.F.); +#84168 = EDGE_LOOP('',(#84169,#84170,#84171,#84172,#84178,#84179)); +#84169 = ORIENTED_EDGE('',*,*,#84148,.F.); +#84170 = ORIENTED_EDGE('',*,*,#83046,.F.); +#84171 = ORIENTED_EDGE('',*,*,#84122,.T.); +#84172 = ORIENTED_EDGE('',*,*,#84173,.F.); +#84173 = EDGE_CURVE('',#83631,#84123,#84174,.T.); +#84174 = LINE('',#84175,#84176); +#84175 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84176 = VECTOR('',#84177,1.); +#84177 = DIRECTION('',(1.,0.,0.)); +#84178 = ORIENTED_EDGE('',*,*,#83630,.F.); +#84179 = ORIENTED_EDGE('',*,*,#84180,.F.); +#84180 = EDGE_CURVE('',#84149,#83622,#84181,.T.); +#84181 = LINE('',#84182,#84183); +#84182 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84183 = VECTOR('',#84184,1.); +#84184 = DIRECTION('',(1.,0.,0.)); +#84185 = PLANE('',#84186); +#84186 = AXIS2_PLACEMENT_3D('',#84187,#84188,#84189); +#84187 = CARTESIAN_POINT('',(6.4,-104.6,5.1)); +#84188 = DIRECTION('',(0.,0.,1.)); +#84189 = DIRECTION('',(-1.,0.,0.)); +#84190 = ADVANCED_FACE('',(#84191),#84216,.F.); +#84191 = FACE_BOUND('',#84192,.F.); +#84192 = EDGE_LOOP('',(#84193,#84201,#84202,#84210)); +#84193 = ORIENTED_EDGE('',*,*,#84194,.F.); +#84194 = EDGE_CURVE('',#83066,#84195,#84197,.T.); +#84195 = VERTEX_POINT('',#84196); +#84196 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#84197 = LINE('',#84198,#84199); +#84198 = CARTESIAN_POINT('',(1.4,-104.6,2.4)); +#84199 = VECTOR('',#84200,1.); +#84200 = DIRECTION('',(-0.,1.,-0.)); +#84201 = ORIENTED_EDGE('',*,*,#83063,.F.); +#84202 = ORIENTED_EDGE('',*,*,#84203,.T.); +#84203 = EDGE_CURVE('',#83064,#84204,#84206,.T.); +#84204 = VERTEX_POINT('',#84205); +#84205 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#84206 = LINE('',#84207,#84208); +#84207 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#84208 = VECTOR('',#84209,1.); +#84209 = DIRECTION('',(-0.,1.,-0.)); +#84210 = ORIENTED_EDGE('',*,*,#84211,.T.); +#84211 = EDGE_CURVE('',#84204,#84195,#84212,.T.); +#84212 = LINE('',#84213,#84214); +#84213 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#84214 = VECTOR('',#84215,1.); +#84215 = DIRECTION('',(1.,0.,0.)); +#84216 = PLANE('',#84217); +#84217 = AXIS2_PLACEMENT_3D('',#84218,#84219,#84220); +#84218 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#84219 = DIRECTION('',(0.,0.,-1.)); +#84220 = DIRECTION('',(1.,0.,0.)); +#84221 = ADVANCED_FACE('',(#84222),#84240,.F.); +#84222 = FACE_BOUND('',#84223,.F.); +#84223 = EDGE_LOOP('',(#84224,#84232,#84233,#84234)); +#84224 = ORIENTED_EDGE('',*,*,#84225,.F.); +#84225 = EDGE_CURVE('',#83093,#84226,#84228,.T.); +#84226 = VERTEX_POINT('',#84227); +#84227 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84228 = LINE('',#84229,#84230); +#84229 = CARTESIAN_POINT('',(1.4,-104.6,5.1)); +#84230 = VECTOR('',#84231,1.); +#84231 = DIRECTION('',(-0.,1.,-0.)); +#84232 = ORIENTED_EDGE('',*,*,#83092,.F.); +#84233 = ORIENTED_EDGE('',*,*,#84194,.T.); +#84234 = ORIENTED_EDGE('',*,*,#84235,.T.); +#84235 = EDGE_CURVE('',#84195,#84226,#84236,.T.); +#84236 = LINE('',#84237,#84238); +#84237 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#84238 = VECTOR('',#84239,1.); +#84239 = DIRECTION('',(0.,0.,1.)); +#84240 = PLANE('',#84241); +#84241 = AXIS2_PLACEMENT_3D('',#84242,#84243,#84244); +#84242 = CARTESIAN_POINT('',(1.4,-104.6,2.4)); +#84243 = DIRECTION('',(1.,0.,-0.)); +#84244 = DIRECTION('',(0.,0.,1.)); +#84245 = ADVANCED_FACE('',(#84246),#84264,.F.); +#84246 = FACE_BOUND('',#84247,.F.); +#84247 = EDGE_LOOP('',(#84248,#84249,#84250,#84258)); +#84248 = ORIENTED_EDGE('',*,*,#84203,.F.); +#84249 = ORIENTED_EDGE('',*,*,#83115,.F.); +#84250 = ORIENTED_EDGE('',*,*,#84251,.T.); +#84251 = EDGE_CURVE('',#83116,#84252,#84254,.T.); +#84252 = VERTEX_POINT('',#84253); +#84253 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#84254 = LINE('',#84255,#84256); +#84255 = CARTESIAN_POINT('',(-1.4,-104.6,5.1)); +#84256 = VECTOR('',#84257,1.); +#84257 = DIRECTION('',(-0.,1.,-0.)); +#84258 = ORIENTED_EDGE('',*,*,#84259,.F.); +#84259 = EDGE_CURVE('',#84204,#84252,#84260,.T.); +#84260 = LINE('',#84261,#84262); +#84261 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#84262 = VECTOR('',#84263,1.); +#84263 = DIRECTION('',(0.,0.,1.)); +#84264 = PLANE('',#84265); +#84265 = AXIS2_PLACEMENT_3D('',#84266,#84267,#84268); +#84266 = CARTESIAN_POINT('',(-1.4,-104.6,5.1)); +#84267 = DIRECTION('',(-1.,-0.,-0.)); +#84268 = DIRECTION('',(0.,0.,-1.)); +#84269 = ADVANCED_FACE('',(#84270),#84288,.F.); +#84270 = FACE_BOUND('',#84271,.F.); +#84271 = EDGE_LOOP('',(#84272,#84273,#84274,#84275,#84281,#84282)); +#84272 = ORIENTED_EDGE('',*,*,#84251,.F.); +#84273 = ORIENTED_EDGE('',*,*,#83138,.F.); +#84274 = ORIENTED_EDGE('',*,*,#84225,.T.); +#84275 = ORIENTED_EDGE('',*,*,#84276,.F.); +#84276 = EDGE_CURVE('',#83742,#84226,#84277,.T.); +#84277 = LINE('',#84278,#84279); +#84278 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#84279 = VECTOR('',#84280,1.); +#84280 = DIRECTION('',(1.,0.,0.)); +#84281 = ORIENTED_EDGE('',*,*,#83741,.F.); +#84282 = ORIENTED_EDGE('',*,*,#84283,.F.); +#84283 = EDGE_CURVE('',#84252,#83733,#84284,.T.); +#84284 = LINE('',#84285,#84286); +#84285 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#84286 = VECTOR('',#84287,1.); +#84287 = DIRECTION('',(1.,0.,0.)); +#84288 = PLANE('',#84289); +#84289 = AXIS2_PLACEMENT_3D('',#84290,#84291,#84292); +#84290 = CARTESIAN_POINT('',(1.4,-104.6,5.1)); +#84291 = DIRECTION('',(0.,0.,1.)); +#84292 = DIRECTION('',(-1.,0.,0.)); +#84293 = ADVANCED_FACE('',(#84294),#84304,.F.); +#84294 = FACE_BOUND('',#84295,.F.); +#84295 = EDGE_LOOP('',(#84296,#84297,#84303)); +#84296 = ORIENTED_EDGE('',*,*,#83323,.F.); +#84297 = ORIENTED_EDGE('',*,*,#84298,.T.); +#84298 = EDGE_CURVE('',#83316,#83238,#84299,.T.); +#84299 = LINE('',#84300,#84301); +#84300 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#84301 = VECTOR('',#84302,1.); +#84302 = DIRECTION('',(0.,1.,0.)); +#84303 = ORIENTED_EDGE('',*,*,#83237,.F.); +#84304 = PLANE('',#84305); +#84305 = AXIS2_PLACEMENT_3D('',#84306,#84307,#84308); +#84306 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#84307 = DIRECTION('',(0.,0.,-1.)); +#84308 = DIRECTION('',(1.,0.,0.)); +#84309 = ADVANCED_FACE('',(#84310),#84337,.F.); +#84310 = FACE_BOUND('',#84311,.F.); +#84311 = EDGE_LOOP('',(#84312,#84313,#84314,#84322,#84330,#84336)); +#84312 = ORIENTED_EDGE('',*,*,#84298,.F.); +#84313 = ORIENTED_EDGE('',*,*,#83315,.T.); +#84314 = ORIENTED_EDGE('',*,*,#84315,.T.); +#84315 = EDGE_CURVE('',#83307,#84316,#84318,.T.); +#84316 = VERTEX_POINT('',#84317); +#84317 = CARTESIAN_POINT('',(21.4,-1.484523257867,5.1)); +#84318 = LINE('',#84319,#84320); +#84319 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#84320 = VECTOR('',#84321,1.); +#84321 = DIRECTION('',(0.,1.,0.)); +#84322 = ORIENTED_EDGE('',*,*,#84323,.T.); +#84323 = EDGE_CURVE('',#84316,#84324,#84326,.T.); +#84324 = VERTEX_POINT('',#84325); +#84325 = CARTESIAN_POINT('',(21.4,1.084523257867,5.1)); +#84326 = LINE('',#84327,#84328); +#84327 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#84328 = VECTOR('',#84329,1.); +#84329 = DIRECTION('',(0.,1.,0.)); +#84330 = ORIENTED_EDGE('',*,*,#84331,.T.); +#84331 = EDGE_CURVE('',#84324,#83247,#84332,.T.); +#84332 = LINE('',#84333,#84334); +#84333 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#84334 = VECTOR('',#84335,1.); +#84335 = DIRECTION('',(0.,1.,0.)); +#84336 = ORIENTED_EDGE('',*,*,#83246,.F.); +#84337 = PLANE('',#84338); +#84338 = AXIS2_PLACEMENT_3D('',#84339,#84340,#84341); +#84339 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#84340 = DIRECTION('',(-1.,0.,0.)); +#84341 = DIRECTION('',(0.,1.,0.)); +#84342 = ADVANCED_FACE('',(#84343),#84362,.T.); +#84343 = FACE_BOUND('',#84344,.T.); +#84344 = EDGE_LOOP('',(#84345,#84354,#84360,#84361)); +#84345 = ORIENTED_EDGE('',*,*,#84346,.F.); +#84346 = EDGE_CURVE('',#84347,#84316,#84349,.T.); +#84347 = VERTEX_POINT('',#84348); +#84348 = CARTESIAN_POINT('',(20.60827625303,-2.,5.1)); +#84349 = CIRCLE('',#84350,1.9); +#84350 = AXIS2_PLACEMENT_3D('',#84351,#84352,#84353); +#84351 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#84352 = DIRECTION('',(0.,0.,1.)); +#84353 = DIRECTION('',(1.,0.,-0.)); +#84354 = ORIENTED_EDGE('',*,*,#84355,.T.); +#84355 = EDGE_CURVE('',#84347,#83298,#84356,.T.); +#84356 = LINE('',#84357,#84358); +#84357 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#84358 = VECTOR('',#84359,1.); +#84359 = DIRECTION('',(1.,0.,0.)); +#84360 = ORIENTED_EDGE('',*,*,#83306,.T.); +#84361 = ORIENTED_EDGE('',*,*,#84315,.T.); +#84362 = PLANE('',#84363); +#84363 = AXIS2_PLACEMENT_3D('',#84364,#84365,#84366); +#84364 = CARTESIAN_POINT('',(20.,0.,5.1)); +#84365 = DIRECTION('',(0.,0.,1.)); +#84366 = DIRECTION('',(1.,0.,-0.)); +#84367 = ADVANCED_FACE('',(#84368),#84394,.T.); +#84368 = FACE_BOUND('',#84369,.T.); +#84369 = EDGE_LOOP('',(#84370,#84381,#84387,#84388)); +#84370 = ORIENTED_EDGE('',*,*,#84371,.F.); +#84371 = EDGE_CURVE('',#84372,#84374,#84376,.T.); +#84372 = VERTEX_POINT('',#84373); +#84373 = CARTESIAN_POINT('',(18.6,-1.484523257866,5.1)); +#84374 = VERTEX_POINT('',#84375); +#84375 = CARTESIAN_POINT('',(19.39172374697,-2.,5.1)); +#84376 = CIRCLE('',#84377,1.9); +#84377 = AXIS2_PLACEMENT_3D('',#84378,#84379,#84380); +#84378 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#84379 = DIRECTION('',(0.,0.,1.)); +#84380 = DIRECTION('',(1.,0.,-0.)); +#84381 = ORIENTED_EDGE('',*,*,#84382,.T.); +#84382 = EDGE_CURVE('',#84372,#83281,#84383,.T.); +#84383 = LINE('',#84384,#84385); +#84384 = CARTESIAN_POINT('',(18.6,2.,5.1)); +#84385 = VECTOR('',#84386,1.); +#84386 = DIRECTION('',(0.,-1.,0.)); +#84387 = ORIENTED_EDGE('',*,*,#83288,.T.); +#84388 = ORIENTED_EDGE('',*,*,#84389,.T.); +#84389 = EDGE_CURVE('',#83289,#84374,#84390,.T.); +#84390 = LINE('',#84391,#84392); +#84391 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#84392 = VECTOR('',#84393,1.); +#84393 = DIRECTION('',(1.,0.,0.)); +#84394 = PLANE('',#84395); +#84395 = AXIS2_PLACEMENT_3D('',#84396,#84397,#84398); +#84396 = CARTESIAN_POINT('',(20.,0.,5.1)); +#84397 = DIRECTION('',(0.,0.,1.)); +#84398 = DIRECTION('',(1.,0.,-0.)); +#84399 = ADVANCED_FACE('',(#84400),#84425,.F.); +#84400 = FACE_BOUND('',#84401,.F.); +#84401 = EDGE_LOOP('',(#84402,#84403,#84411,#84417,#84418,#84419)); +#84402 = ORIENTED_EDGE('',*,*,#83263,.T.); +#84403 = ORIENTED_EDGE('',*,*,#84404,.T.); +#84404 = EDGE_CURVE('',#83255,#84405,#84407,.T.); +#84405 = VERTEX_POINT('',#84406); +#84406 = CARTESIAN_POINT('',(18.6,1.084523257866,5.1)); +#84407 = LINE('',#84408,#84409); +#84408 = CARTESIAN_POINT('',(18.6,2.,5.1)); +#84409 = VECTOR('',#84410,1.); +#84410 = DIRECTION('',(0.,-1.,0.)); +#84411 = ORIENTED_EDGE('',*,*,#84412,.T.); +#84412 = EDGE_CURVE('',#84405,#84372,#84413,.T.); +#84413 = LINE('',#84414,#84415); +#84414 = CARTESIAN_POINT('',(18.6,2.,5.1)); +#84415 = VECTOR('',#84416,1.); +#84416 = DIRECTION('',(0.,-1.,0.)); +#84417 = ORIENTED_EDGE('',*,*,#84382,.T.); +#84418 = ORIENTED_EDGE('',*,*,#83280,.F.); +#84419 = ORIENTED_EDGE('',*,*,#84420,.F.); +#84420 = EDGE_CURVE('',#83264,#83272,#84421,.T.); +#84421 = LINE('',#84422,#84423); +#84422 = CARTESIAN_POINT('',(18.6,2.,2.4)); +#84423 = VECTOR('',#84424,1.); +#84424 = DIRECTION('',(0.,-1.,0.)); +#84425 = PLANE('',#84426); +#84426 = AXIS2_PLACEMENT_3D('',#84427,#84428,#84429); +#84427 = CARTESIAN_POINT('',(18.6,2.,2.4)); +#84428 = DIRECTION('',(1.,0.,-0.)); +#84429 = DIRECTION('',(0.,-1.,0.)); +#84430 = ADVANCED_FACE('',(#84431),#84435,.F.); +#84431 = FACE_BOUND('',#84432,.F.); +#84432 = EDGE_LOOP('',(#84433,#84434)); +#84433 = ORIENTED_EDGE('',*,*,#84420,.T.); +#84434 = ORIENTED_EDGE('',*,*,#83271,.F.); +#84435 = PLANE('',#84436); +#84436 = AXIS2_PLACEMENT_3D('',#84437,#84438,#84439); +#84437 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#84438 = DIRECTION('',(0.,0.,-1.)); +#84439 = DIRECTION('',(1.,0.,0.)); +#84440 = ADVANCED_FACE('',(#84441),#84453,.T.); +#84441 = FACE_BOUND('',#84442,.T.); +#84442 = EDGE_LOOP('',(#84443,#84444,#84445,#84452)); +#84443 = ORIENTED_EDGE('',*,*,#83254,.T.); +#84444 = ORIENTED_EDGE('',*,*,#84404,.T.); +#84445 = ORIENTED_EDGE('',*,*,#84446,.F.); +#84446 = EDGE_CURVE('',#84324,#84405,#84447,.T.); +#84447 = CIRCLE('',#84448,1.9); +#84448 = AXIS2_PLACEMENT_3D('',#84449,#84450,#84451); +#84449 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#84450 = DIRECTION('',(0.,0.,1.)); +#84451 = DIRECTION('',(1.,0.,-0.)); +#84452 = ORIENTED_EDGE('',*,*,#84331,.T.); +#84453 = PLANE('',#84454); +#84454 = AXIS2_PLACEMENT_3D('',#84455,#84456,#84457); +#84455 = CARTESIAN_POINT('',(20.,0.,5.1)); +#84456 = DIRECTION('',(0.,0.,1.)); +#84457 = DIRECTION('',(1.,0.,-0.)); +#84458 = ADVANCED_FACE('',(#84459),#84469,.F.); +#84459 = FACE_BOUND('',#84460,.F.); +#84460 = EDGE_LOOP('',(#84461,#84462,#84468)); +#84461 = ORIENTED_EDGE('',*,*,#83434,.F.); +#84462 = ORIENTED_EDGE('',*,*,#84463,.T.); +#84463 = EDGE_CURVE('',#83427,#83349,#84464,.T.); +#84464 = LINE('',#84465,#84466); +#84465 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#84466 = VECTOR('',#84467,1.); +#84467 = DIRECTION('',(0.,1.,0.)); +#84468 = ORIENTED_EDGE('',*,*,#83348,.F.); +#84469 = PLANE('',#84470); +#84470 = AXIS2_PLACEMENT_3D('',#84471,#84472,#84473); +#84471 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#84472 = DIRECTION('',(0.,0.,-1.)); +#84473 = DIRECTION('',(1.,0.,0.)); +#84474 = ADVANCED_FACE('',(#84475),#84502,.F.); +#84475 = FACE_BOUND('',#84476,.F.); +#84476 = EDGE_LOOP('',(#84477,#84478,#84479,#84487,#84495,#84501)); +#84477 = ORIENTED_EDGE('',*,*,#84463,.F.); +#84478 = ORIENTED_EDGE('',*,*,#83426,.T.); +#84479 = ORIENTED_EDGE('',*,*,#84480,.T.); +#84480 = EDGE_CURVE('',#83418,#84481,#84483,.T.); +#84481 = VERTEX_POINT('',#84482); +#84482 = CARTESIAN_POINT('',(16.4,-1.484523257867,5.1)); +#84483 = LINE('',#84484,#84485); +#84484 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#84485 = VECTOR('',#84486,1.); +#84486 = DIRECTION('',(0.,1.,0.)); +#84487 = ORIENTED_EDGE('',*,*,#84488,.T.); +#84488 = EDGE_CURVE('',#84481,#84489,#84491,.T.); +#84489 = VERTEX_POINT('',#84490); +#84490 = CARTESIAN_POINT('',(16.4,1.084523257867,5.1)); +#84491 = LINE('',#84492,#84493); +#84492 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#84493 = VECTOR('',#84494,1.); +#84494 = DIRECTION('',(0.,1.,0.)); +#84495 = ORIENTED_EDGE('',*,*,#84496,.T.); +#84496 = EDGE_CURVE('',#84489,#83358,#84497,.T.); +#84497 = LINE('',#84498,#84499); +#84498 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#84499 = VECTOR('',#84500,1.); +#84500 = DIRECTION('',(0.,1.,0.)); +#84501 = ORIENTED_EDGE('',*,*,#83357,.F.); +#84502 = PLANE('',#84503); +#84503 = AXIS2_PLACEMENT_3D('',#84504,#84505,#84506); +#84504 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#84505 = DIRECTION('',(-1.,0.,0.)); +#84506 = DIRECTION('',(0.,1.,0.)); +#84507 = ADVANCED_FACE('',(#84508),#84527,.T.); +#84508 = FACE_BOUND('',#84509,.T.); +#84509 = EDGE_LOOP('',(#84510,#84519,#84525,#84526)); +#84510 = ORIENTED_EDGE('',*,*,#84511,.F.); +#84511 = EDGE_CURVE('',#84512,#84481,#84514,.T.); +#84512 = VERTEX_POINT('',#84513); +#84513 = CARTESIAN_POINT('',(15.60827625303,-2.,5.1)); +#84514 = CIRCLE('',#84515,1.9); +#84515 = AXIS2_PLACEMENT_3D('',#84516,#84517,#84518); +#84516 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#84517 = DIRECTION('',(0.,0.,1.)); +#84518 = DIRECTION('',(1.,0.,-0.)); +#84519 = ORIENTED_EDGE('',*,*,#84520,.T.); +#84520 = EDGE_CURVE('',#84512,#83409,#84521,.T.); +#84521 = LINE('',#84522,#84523); +#84522 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#84523 = VECTOR('',#84524,1.); +#84524 = DIRECTION('',(1.,0.,0.)); +#84525 = ORIENTED_EDGE('',*,*,#83417,.T.); +#84526 = ORIENTED_EDGE('',*,*,#84480,.T.); +#84527 = PLANE('',#84528); +#84528 = AXIS2_PLACEMENT_3D('',#84529,#84530,#84531); +#84529 = CARTESIAN_POINT('',(15.,0.,5.1)); +#84530 = DIRECTION('',(0.,0.,1.)); +#84531 = DIRECTION('',(1.,0.,-0.)); +#84532 = ADVANCED_FACE('',(#84533),#84559,.T.); +#84533 = FACE_BOUND('',#84534,.T.); +#84534 = EDGE_LOOP('',(#84535,#84546,#84552,#84553)); +#84535 = ORIENTED_EDGE('',*,*,#84536,.F.); +#84536 = EDGE_CURVE('',#84537,#84539,#84541,.T.); +#84537 = VERTEX_POINT('',#84538); +#84538 = CARTESIAN_POINT('',(13.6,-1.484523257866,5.1)); +#84539 = VERTEX_POINT('',#84540); +#84540 = CARTESIAN_POINT('',(14.39172374697,-2.,5.1)); +#84541 = CIRCLE('',#84542,1.9); +#84542 = AXIS2_PLACEMENT_3D('',#84543,#84544,#84545); +#84543 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#84544 = DIRECTION('',(0.,0.,1.)); +#84545 = DIRECTION('',(1.,0.,-0.)); +#84546 = ORIENTED_EDGE('',*,*,#84547,.T.); +#84547 = EDGE_CURVE('',#84537,#83392,#84548,.T.); +#84548 = LINE('',#84549,#84550); +#84549 = CARTESIAN_POINT('',(13.6,2.,5.1)); +#84550 = VECTOR('',#84551,1.); +#84551 = DIRECTION('',(0.,-1.,0.)); +#84552 = ORIENTED_EDGE('',*,*,#83399,.T.); +#84553 = ORIENTED_EDGE('',*,*,#84554,.T.); +#84554 = EDGE_CURVE('',#83400,#84539,#84555,.T.); +#84555 = LINE('',#84556,#84557); +#84556 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#84557 = VECTOR('',#84558,1.); +#84558 = DIRECTION('',(1.,0.,0.)); +#84559 = PLANE('',#84560); +#84560 = AXIS2_PLACEMENT_3D('',#84561,#84562,#84563); +#84561 = CARTESIAN_POINT('',(15.,0.,5.1)); +#84562 = DIRECTION('',(0.,0.,1.)); +#84563 = DIRECTION('',(1.,0.,-0.)); +#84564 = ADVANCED_FACE('',(#84565),#84590,.F.); +#84565 = FACE_BOUND('',#84566,.F.); +#84566 = EDGE_LOOP('',(#84567,#84568,#84576,#84582,#84583,#84584)); +#84567 = ORIENTED_EDGE('',*,*,#83374,.T.); +#84568 = ORIENTED_EDGE('',*,*,#84569,.T.); +#84569 = EDGE_CURVE('',#83366,#84570,#84572,.T.); +#84570 = VERTEX_POINT('',#84571); +#84571 = CARTESIAN_POINT('',(13.6,1.084523257866,5.1)); +#84572 = LINE('',#84573,#84574); +#84573 = CARTESIAN_POINT('',(13.6,2.,5.1)); +#84574 = VECTOR('',#84575,1.); +#84575 = DIRECTION('',(0.,-1.,0.)); +#84576 = ORIENTED_EDGE('',*,*,#84577,.T.); +#84577 = EDGE_CURVE('',#84570,#84537,#84578,.T.); +#84578 = LINE('',#84579,#84580); +#84579 = CARTESIAN_POINT('',(13.6,2.,5.1)); +#84580 = VECTOR('',#84581,1.); +#84581 = DIRECTION('',(0.,-1.,0.)); +#84582 = ORIENTED_EDGE('',*,*,#84547,.T.); +#84583 = ORIENTED_EDGE('',*,*,#83391,.F.); +#84584 = ORIENTED_EDGE('',*,*,#84585,.F.); +#84585 = EDGE_CURVE('',#83375,#83383,#84586,.T.); +#84586 = LINE('',#84587,#84588); +#84587 = CARTESIAN_POINT('',(13.6,2.,2.4)); +#84588 = VECTOR('',#84589,1.); +#84589 = DIRECTION('',(0.,-1.,0.)); +#84590 = PLANE('',#84591); +#84591 = AXIS2_PLACEMENT_3D('',#84592,#84593,#84594); +#84592 = CARTESIAN_POINT('',(13.6,2.,2.4)); +#84593 = DIRECTION('',(1.,0.,-0.)); +#84594 = DIRECTION('',(0.,-1.,0.)); +#84595 = ADVANCED_FACE('',(#84596),#84600,.F.); +#84596 = FACE_BOUND('',#84597,.F.); +#84597 = EDGE_LOOP('',(#84598,#84599)); +#84598 = ORIENTED_EDGE('',*,*,#84585,.T.); +#84599 = ORIENTED_EDGE('',*,*,#83382,.F.); +#84600 = PLANE('',#84601); +#84601 = AXIS2_PLACEMENT_3D('',#84602,#84603,#84604); +#84602 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#84603 = DIRECTION('',(0.,0.,-1.)); +#84604 = DIRECTION('',(1.,0.,0.)); +#84605 = ADVANCED_FACE('',(#84606),#84618,.T.); +#84606 = FACE_BOUND('',#84607,.T.); +#84607 = EDGE_LOOP('',(#84608,#84609,#84610,#84617)); +#84608 = ORIENTED_EDGE('',*,*,#83365,.T.); +#84609 = ORIENTED_EDGE('',*,*,#84569,.T.); +#84610 = ORIENTED_EDGE('',*,*,#84611,.F.); +#84611 = EDGE_CURVE('',#84489,#84570,#84612,.T.); +#84612 = CIRCLE('',#84613,1.9); +#84613 = AXIS2_PLACEMENT_3D('',#84614,#84615,#84616); +#84614 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#84615 = DIRECTION('',(0.,0.,1.)); +#84616 = DIRECTION('',(1.,0.,-0.)); +#84617 = ORIENTED_EDGE('',*,*,#84496,.T.); +#84618 = PLANE('',#84619); +#84619 = AXIS2_PLACEMENT_3D('',#84620,#84621,#84622); +#84620 = CARTESIAN_POINT('',(15.,0.,5.1)); +#84621 = DIRECTION('',(0.,0.,1.)); +#84622 = DIRECTION('',(1.,0.,-0.)); +#84623 = ADVANCED_FACE('',(#84624),#84634,.F.); +#84624 = FACE_BOUND('',#84625,.F.); +#84625 = EDGE_LOOP('',(#84626,#84627,#84633)); +#84626 = ORIENTED_EDGE('',*,*,#83545,.F.); +#84627 = ORIENTED_EDGE('',*,*,#84628,.T.); +#84628 = EDGE_CURVE('',#83538,#83460,#84629,.T.); +#84629 = LINE('',#84630,#84631); +#84630 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#84631 = VECTOR('',#84632,1.); +#84632 = DIRECTION('',(0.,1.,0.)); +#84633 = ORIENTED_EDGE('',*,*,#83459,.F.); +#84634 = PLANE('',#84635); +#84635 = AXIS2_PLACEMENT_3D('',#84636,#84637,#84638); +#84636 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84637 = DIRECTION('',(0.,0.,-1.)); +#84638 = DIRECTION('',(1.,0.,0.)); +#84639 = ADVANCED_FACE('',(#84640),#84667,.F.); +#84640 = FACE_BOUND('',#84641,.F.); +#84641 = EDGE_LOOP('',(#84642,#84643,#84644,#84652,#84660,#84666)); +#84642 = ORIENTED_EDGE('',*,*,#84628,.F.); +#84643 = ORIENTED_EDGE('',*,*,#83537,.T.); +#84644 = ORIENTED_EDGE('',*,*,#84645,.T.); +#84645 = EDGE_CURVE('',#83529,#84646,#84648,.T.); +#84646 = VERTEX_POINT('',#84647); +#84647 = CARTESIAN_POINT('',(11.4,-1.484523257867,5.1)); +#84648 = LINE('',#84649,#84650); +#84649 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84650 = VECTOR('',#84651,1.); +#84651 = DIRECTION('',(0.,1.,0.)); +#84652 = ORIENTED_EDGE('',*,*,#84653,.T.); +#84653 = EDGE_CURVE('',#84646,#84654,#84656,.T.); +#84654 = VERTEX_POINT('',#84655); +#84655 = CARTESIAN_POINT('',(11.4,1.084523257867,5.1)); +#84656 = LINE('',#84657,#84658); +#84657 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84658 = VECTOR('',#84659,1.); +#84659 = DIRECTION('',(0.,1.,0.)); +#84660 = ORIENTED_EDGE('',*,*,#84661,.T.); +#84661 = EDGE_CURVE('',#84654,#83469,#84662,.T.); +#84662 = LINE('',#84663,#84664); +#84663 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84664 = VECTOR('',#84665,1.); +#84665 = DIRECTION('',(0.,1.,0.)); +#84666 = ORIENTED_EDGE('',*,*,#83468,.F.); +#84667 = PLANE('',#84668); +#84668 = AXIS2_PLACEMENT_3D('',#84669,#84670,#84671); +#84669 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#84670 = DIRECTION('',(-1.,0.,0.)); +#84671 = DIRECTION('',(0.,1.,0.)); +#84672 = ADVANCED_FACE('',(#84673),#84692,.T.); +#84673 = FACE_BOUND('',#84674,.T.); +#84674 = EDGE_LOOP('',(#84675,#84684,#84690,#84691)); +#84675 = ORIENTED_EDGE('',*,*,#84676,.F.); +#84676 = EDGE_CURVE('',#84677,#84646,#84679,.T.); +#84677 = VERTEX_POINT('',#84678); +#84678 = CARTESIAN_POINT('',(10.60827625303,-2.,5.1)); +#84679 = CIRCLE('',#84680,1.9); +#84680 = AXIS2_PLACEMENT_3D('',#84681,#84682,#84683); +#84681 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#84682 = DIRECTION('',(0.,0.,1.)); +#84683 = DIRECTION('',(1.,0.,-0.)); +#84684 = ORIENTED_EDGE('',*,*,#84685,.T.); +#84685 = EDGE_CURVE('',#84677,#83520,#84686,.T.); +#84686 = LINE('',#84687,#84688); +#84687 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84688 = VECTOR('',#84689,1.); +#84689 = DIRECTION('',(1.,0.,0.)); +#84690 = ORIENTED_EDGE('',*,*,#83528,.T.); +#84691 = ORIENTED_EDGE('',*,*,#84645,.T.); +#84692 = PLANE('',#84693); +#84693 = AXIS2_PLACEMENT_3D('',#84694,#84695,#84696); +#84694 = CARTESIAN_POINT('',(10.,0.,5.1)); +#84695 = DIRECTION('',(0.,0.,1.)); +#84696 = DIRECTION('',(1.,0.,-0.)); +#84697 = ADVANCED_FACE('',(#84698),#84724,.T.); +#84698 = FACE_BOUND('',#84699,.T.); +#84699 = EDGE_LOOP('',(#84700,#84711,#84717,#84718)); +#84700 = ORIENTED_EDGE('',*,*,#84701,.F.); +#84701 = EDGE_CURVE('',#84702,#84704,#84706,.T.); +#84702 = VERTEX_POINT('',#84703); +#84703 = CARTESIAN_POINT('',(8.6,-1.484523257866,5.1)); +#84704 = VERTEX_POINT('',#84705); +#84705 = CARTESIAN_POINT('',(9.39172374697,-2.,5.1)); +#84706 = CIRCLE('',#84707,1.9); +#84707 = AXIS2_PLACEMENT_3D('',#84708,#84709,#84710); +#84708 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#84709 = DIRECTION('',(0.,0.,1.)); +#84710 = DIRECTION('',(1.,0.,-0.)); +#84711 = ORIENTED_EDGE('',*,*,#84712,.T.); +#84712 = EDGE_CURVE('',#84702,#83503,#84713,.T.); +#84713 = LINE('',#84714,#84715); +#84714 = CARTESIAN_POINT('',(8.6,2.,5.1)); +#84715 = VECTOR('',#84716,1.); +#84716 = DIRECTION('',(0.,-1.,0.)); +#84717 = ORIENTED_EDGE('',*,*,#83510,.T.); +#84718 = ORIENTED_EDGE('',*,*,#84719,.T.); +#84719 = EDGE_CURVE('',#83511,#84704,#84720,.T.); +#84720 = LINE('',#84721,#84722); +#84721 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84722 = VECTOR('',#84723,1.); +#84723 = DIRECTION('',(1.,0.,0.)); +#84724 = PLANE('',#84725); +#84725 = AXIS2_PLACEMENT_3D('',#84726,#84727,#84728); +#84726 = CARTESIAN_POINT('',(10.,0.,5.1)); +#84727 = DIRECTION('',(0.,0.,1.)); +#84728 = DIRECTION('',(1.,0.,-0.)); +#84729 = ADVANCED_FACE('',(#84730),#84755,.F.); +#84730 = FACE_BOUND('',#84731,.F.); +#84731 = EDGE_LOOP('',(#84732,#84733,#84741,#84747,#84748,#84749)); +#84732 = ORIENTED_EDGE('',*,*,#83485,.T.); +#84733 = ORIENTED_EDGE('',*,*,#84734,.T.); +#84734 = EDGE_CURVE('',#83477,#84735,#84737,.T.); +#84735 = VERTEX_POINT('',#84736); +#84736 = CARTESIAN_POINT('',(8.6,1.084523257866,5.1)); +#84737 = LINE('',#84738,#84739); +#84738 = CARTESIAN_POINT('',(8.6,2.,5.1)); +#84739 = VECTOR('',#84740,1.); +#84740 = DIRECTION('',(0.,-1.,0.)); +#84741 = ORIENTED_EDGE('',*,*,#84742,.T.); +#84742 = EDGE_CURVE('',#84735,#84702,#84743,.T.); +#84743 = LINE('',#84744,#84745); +#84744 = CARTESIAN_POINT('',(8.6,2.,5.1)); +#84745 = VECTOR('',#84746,1.); +#84746 = DIRECTION('',(0.,-1.,0.)); +#84747 = ORIENTED_EDGE('',*,*,#84712,.T.); +#84748 = ORIENTED_EDGE('',*,*,#83502,.F.); +#84749 = ORIENTED_EDGE('',*,*,#84750,.F.); +#84750 = EDGE_CURVE('',#83486,#83494,#84751,.T.); +#84751 = LINE('',#84752,#84753); +#84752 = CARTESIAN_POINT('',(8.6,2.,2.4)); +#84753 = VECTOR('',#84754,1.); +#84754 = DIRECTION('',(0.,-1.,0.)); +#84755 = PLANE('',#84756); +#84756 = AXIS2_PLACEMENT_3D('',#84757,#84758,#84759); +#84757 = CARTESIAN_POINT('',(8.6,2.,2.4)); +#84758 = DIRECTION('',(1.,0.,-0.)); +#84759 = DIRECTION('',(0.,-1.,0.)); +#84760 = ADVANCED_FACE('',(#84761),#84765,.F.); +#84761 = FACE_BOUND('',#84762,.F.); +#84762 = EDGE_LOOP('',(#84763,#84764)); +#84763 = ORIENTED_EDGE('',*,*,#84750,.T.); +#84764 = ORIENTED_EDGE('',*,*,#83493,.F.); +#84765 = PLANE('',#84766); +#84766 = AXIS2_PLACEMENT_3D('',#84767,#84768,#84769); +#84767 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84768 = DIRECTION('',(0.,0.,-1.)); +#84769 = DIRECTION('',(1.,0.,0.)); +#84770 = ADVANCED_FACE('',(#84771),#84783,.T.); +#84771 = FACE_BOUND('',#84772,.T.); +#84772 = EDGE_LOOP('',(#84773,#84774,#84775,#84782)); +#84773 = ORIENTED_EDGE('',*,*,#83476,.T.); +#84774 = ORIENTED_EDGE('',*,*,#84734,.T.); +#84775 = ORIENTED_EDGE('',*,*,#84776,.F.); +#84776 = EDGE_CURVE('',#84654,#84735,#84777,.T.); +#84777 = CIRCLE('',#84778,1.9); +#84778 = AXIS2_PLACEMENT_3D('',#84779,#84780,#84781); +#84779 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#84780 = DIRECTION('',(0.,0.,1.)); +#84781 = DIRECTION('',(1.,0.,-0.)); +#84782 = ORIENTED_EDGE('',*,*,#84661,.T.); +#84783 = PLANE('',#84784); +#84784 = AXIS2_PLACEMENT_3D('',#84785,#84786,#84787); +#84785 = CARTESIAN_POINT('',(10.,0.,5.1)); +#84786 = DIRECTION('',(0.,0.,1.)); +#84787 = DIRECTION('',(1.,0.,-0.)); +#84788 = ADVANCED_FACE('',(#84789),#84799,.F.); +#84789 = FACE_BOUND('',#84790,.F.); +#84790 = EDGE_LOOP('',(#84791,#84792,#84798)); +#84791 = ORIENTED_EDGE('',*,*,#83656,.F.); +#84792 = ORIENTED_EDGE('',*,*,#84793,.T.); +#84793 = EDGE_CURVE('',#83649,#83571,#84794,.T.); +#84794 = LINE('',#84795,#84796); +#84795 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84796 = VECTOR('',#84797,1.); +#84797 = DIRECTION('',(0.,1.,0.)); +#84798 = ORIENTED_EDGE('',*,*,#83570,.F.); +#84799 = PLANE('',#84800); +#84800 = AXIS2_PLACEMENT_3D('',#84801,#84802,#84803); +#84801 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84802 = DIRECTION('',(0.,0.,-1.)); +#84803 = DIRECTION('',(1.,0.,0.)); +#84804 = ADVANCED_FACE('',(#84805),#84832,.F.); +#84805 = FACE_BOUND('',#84806,.F.); +#84806 = EDGE_LOOP('',(#84807,#84808,#84809,#84817,#84825,#84831)); +#84807 = ORIENTED_EDGE('',*,*,#84793,.F.); +#84808 = ORIENTED_EDGE('',*,*,#83648,.T.); +#84809 = ORIENTED_EDGE('',*,*,#84810,.T.); +#84810 = EDGE_CURVE('',#83640,#84811,#84813,.T.); +#84811 = VERTEX_POINT('',#84812); +#84812 = CARTESIAN_POINT('',(6.4,-1.484523257867,5.1)); +#84813 = LINE('',#84814,#84815); +#84814 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84815 = VECTOR('',#84816,1.); +#84816 = DIRECTION('',(0.,1.,0.)); +#84817 = ORIENTED_EDGE('',*,*,#84818,.T.); +#84818 = EDGE_CURVE('',#84811,#84819,#84821,.T.); +#84819 = VERTEX_POINT('',#84820); +#84820 = CARTESIAN_POINT('',(6.4,1.084523257867,5.1)); +#84821 = LINE('',#84822,#84823); +#84822 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84823 = VECTOR('',#84824,1.); +#84824 = DIRECTION('',(0.,1.,0.)); +#84825 = ORIENTED_EDGE('',*,*,#84826,.T.); +#84826 = EDGE_CURVE('',#84819,#83580,#84827,.T.); +#84827 = LINE('',#84828,#84829); +#84828 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84829 = VECTOR('',#84830,1.); +#84830 = DIRECTION('',(0.,1.,0.)); +#84831 = ORIENTED_EDGE('',*,*,#83579,.F.); +#84832 = PLANE('',#84833); +#84833 = AXIS2_PLACEMENT_3D('',#84834,#84835,#84836); +#84834 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84835 = DIRECTION('',(-1.,0.,0.)); +#84836 = DIRECTION('',(0.,1.,0.)); +#84837 = ADVANCED_FACE('',(#84838),#84857,.T.); +#84838 = FACE_BOUND('',#84839,.T.); +#84839 = EDGE_LOOP('',(#84840,#84849,#84855,#84856)); +#84840 = ORIENTED_EDGE('',*,*,#84841,.F.); +#84841 = EDGE_CURVE('',#84842,#84811,#84844,.T.); +#84842 = VERTEX_POINT('',#84843); +#84843 = CARTESIAN_POINT('',(5.60827625303,-2.,5.1)); +#84844 = CIRCLE('',#84845,1.9); +#84845 = AXIS2_PLACEMENT_3D('',#84846,#84847,#84848); +#84846 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#84847 = DIRECTION('',(0.,0.,1.)); +#84848 = DIRECTION('',(1.,0.,-0.)); +#84849 = ORIENTED_EDGE('',*,*,#84850,.T.); +#84850 = EDGE_CURVE('',#84842,#83631,#84851,.T.); +#84851 = LINE('',#84852,#84853); +#84852 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84853 = VECTOR('',#84854,1.); +#84854 = DIRECTION('',(1.,0.,0.)); +#84855 = ORIENTED_EDGE('',*,*,#83639,.T.); +#84856 = ORIENTED_EDGE('',*,*,#84810,.T.); +#84857 = PLANE('',#84858); +#84858 = AXIS2_PLACEMENT_3D('',#84859,#84860,#84861); +#84859 = CARTESIAN_POINT('',(5.,0.,5.1)); +#84860 = DIRECTION('',(0.,0.,1.)); +#84861 = DIRECTION('',(1.,0.,-0.)); +#84862 = ADVANCED_FACE('',(#84863),#84889,.T.); +#84863 = FACE_BOUND('',#84864,.T.); +#84864 = EDGE_LOOP('',(#84865,#84876,#84882,#84883)); +#84865 = ORIENTED_EDGE('',*,*,#84866,.F.); +#84866 = EDGE_CURVE('',#84867,#84869,#84871,.T.); +#84867 = VERTEX_POINT('',#84868); +#84868 = CARTESIAN_POINT('',(3.6,-1.484523257866,5.1)); +#84869 = VERTEX_POINT('',#84870); +#84870 = CARTESIAN_POINT('',(4.39172374697,-2.,5.1)); +#84871 = CIRCLE('',#84872,1.9); +#84872 = AXIS2_PLACEMENT_3D('',#84873,#84874,#84875); +#84873 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#84874 = DIRECTION('',(0.,0.,1.)); +#84875 = DIRECTION('',(1.,0.,-0.)); +#84876 = ORIENTED_EDGE('',*,*,#84877,.T.); +#84877 = EDGE_CURVE('',#84867,#83614,#84878,.T.); +#84878 = LINE('',#84879,#84880); +#84879 = CARTESIAN_POINT('',(3.6,2.,5.1)); +#84880 = VECTOR('',#84881,1.); +#84881 = DIRECTION('',(0.,-1.,0.)); +#84882 = ORIENTED_EDGE('',*,*,#83621,.T.); +#84883 = ORIENTED_EDGE('',*,*,#84884,.T.); +#84884 = EDGE_CURVE('',#83622,#84869,#84885,.T.); +#84885 = LINE('',#84886,#84887); +#84886 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84887 = VECTOR('',#84888,1.); +#84888 = DIRECTION('',(1.,0.,0.)); +#84889 = PLANE('',#84890); +#84890 = AXIS2_PLACEMENT_3D('',#84891,#84892,#84893); +#84891 = CARTESIAN_POINT('',(5.,0.,5.1)); +#84892 = DIRECTION('',(0.,0.,1.)); +#84893 = DIRECTION('',(1.,0.,-0.)); +#84894 = ADVANCED_FACE('',(#84895),#84920,.F.); +#84895 = FACE_BOUND('',#84896,.F.); +#84896 = EDGE_LOOP('',(#84897,#84898,#84906,#84912,#84913,#84914)); +#84897 = ORIENTED_EDGE('',*,*,#83596,.T.); +#84898 = ORIENTED_EDGE('',*,*,#84899,.T.); +#84899 = EDGE_CURVE('',#83588,#84900,#84902,.T.); +#84900 = VERTEX_POINT('',#84901); +#84901 = CARTESIAN_POINT('',(3.6,1.084523257866,5.1)); +#84902 = LINE('',#84903,#84904); +#84903 = CARTESIAN_POINT('',(3.6,2.,5.1)); +#84904 = VECTOR('',#84905,1.); +#84905 = DIRECTION('',(0.,-1.,0.)); +#84906 = ORIENTED_EDGE('',*,*,#84907,.T.); +#84907 = EDGE_CURVE('',#84900,#84867,#84908,.T.); +#84908 = LINE('',#84909,#84910); +#84909 = CARTESIAN_POINT('',(3.6,2.,5.1)); +#84910 = VECTOR('',#84911,1.); +#84911 = DIRECTION('',(0.,-1.,0.)); +#84912 = ORIENTED_EDGE('',*,*,#84877,.T.); +#84913 = ORIENTED_EDGE('',*,*,#83613,.F.); +#84914 = ORIENTED_EDGE('',*,*,#84915,.F.); +#84915 = EDGE_CURVE('',#83597,#83605,#84916,.T.); +#84916 = LINE('',#84917,#84918); +#84917 = CARTESIAN_POINT('',(3.6,2.,2.4)); +#84918 = VECTOR('',#84919,1.); +#84919 = DIRECTION('',(0.,-1.,0.)); +#84920 = PLANE('',#84921); +#84921 = AXIS2_PLACEMENT_3D('',#84922,#84923,#84924); +#84922 = CARTESIAN_POINT('',(3.6,2.,2.4)); +#84923 = DIRECTION('',(1.,0.,-0.)); +#84924 = DIRECTION('',(0.,-1.,0.)); +#84925 = ADVANCED_FACE('',(#84926),#84930,.F.); +#84926 = FACE_BOUND('',#84927,.F.); +#84927 = EDGE_LOOP('',(#84928,#84929)); +#84928 = ORIENTED_EDGE('',*,*,#84915,.T.); +#84929 = ORIENTED_EDGE('',*,*,#83604,.F.); +#84930 = PLANE('',#84931); +#84931 = AXIS2_PLACEMENT_3D('',#84932,#84933,#84934); +#84932 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84933 = DIRECTION('',(0.,0.,-1.)); +#84934 = DIRECTION('',(1.,0.,0.)); +#84935 = ADVANCED_FACE('',(#84936),#84948,.T.); +#84936 = FACE_BOUND('',#84937,.T.); +#84937 = EDGE_LOOP('',(#84938,#84939,#84940,#84947)); +#84938 = ORIENTED_EDGE('',*,*,#83587,.T.); +#84939 = ORIENTED_EDGE('',*,*,#84899,.T.); +#84940 = ORIENTED_EDGE('',*,*,#84941,.F.); +#84941 = EDGE_CURVE('',#84819,#84900,#84942,.T.); +#84942 = CIRCLE('',#84943,1.9); +#84943 = AXIS2_PLACEMENT_3D('',#84944,#84945,#84946); +#84944 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#84945 = DIRECTION('',(0.,0.,1.)); +#84946 = DIRECTION('',(1.,0.,-0.)); +#84947 = ORIENTED_EDGE('',*,*,#84826,.T.); +#84948 = PLANE('',#84949); +#84949 = AXIS2_PLACEMENT_3D('',#84950,#84951,#84952); +#84950 = CARTESIAN_POINT('',(5.,0.,5.1)); +#84951 = DIRECTION('',(0.,0.,1.)); +#84952 = DIRECTION('',(1.,0.,-0.)); +#84953 = ADVANCED_FACE('',(#84954),#84964,.F.); +#84954 = FACE_BOUND('',#84955,.F.); +#84955 = EDGE_LOOP('',(#84956,#84957,#84963)); +#84956 = ORIENTED_EDGE('',*,*,#83767,.F.); +#84957 = ORIENTED_EDGE('',*,*,#84958,.T.); +#84958 = EDGE_CURVE('',#83760,#83682,#84959,.T.); +#84959 = LINE('',#84960,#84961); +#84960 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#84961 = VECTOR('',#84962,1.); +#84962 = DIRECTION('',(0.,1.,0.)); +#84963 = ORIENTED_EDGE('',*,*,#83681,.F.); +#84964 = PLANE('',#84965); +#84965 = AXIS2_PLACEMENT_3D('',#84966,#84967,#84968); +#84966 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#84967 = DIRECTION('',(0.,0.,-1.)); +#84968 = DIRECTION('',(1.,0.,0.)); +#84969 = ADVANCED_FACE('',(#84970),#84997,.F.); +#84970 = FACE_BOUND('',#84971,.F.); +#84971 = EDGE_LOOP('',(#84972,#84973,#84974,#84982,#84990,#84996)); +#84972 = ORIENTED_EDGE('',*,*,#84958,.F.); +#84973 = ORIENTED_EDGE('',*,*,#83759,.T.); +#84974 = ORIENTED_EDGE('',*,*,#84975,.T.); +#84975 = EDGE_CURVE('',#83751,#84976,#84978,.T.); +#84976 = VERTEX_POINT('',#84977); +#84977 = CARTESIAN_POINT('',(1.4,-1.484523257867,5.1)); +#84978 = LINE('',#84979,#84980); +#84979 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84980 = VECTOR('',#84981,1.); +#84981 = DIRECTION('',(0.,1.,0.)); +#84982 = ORIENTED_EDGE('',*,*,#84983,.T.); +#84983 = EDGE_CURVE('',#84976,#84984,#84986,.T.); +#84984 = VERTEX_POINT('',#84985); +#84985 = CARTESIAN_POINT('',(1.4,1.084523257867,5.1)); +#84986 = LINE('',#84987,#84988); +#84987 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84988 = VECTOR('',#84989,1.); +#84989 = DIRECTION('',(0.,1.,0.)); +#84990 = ORIENTED_EDGE('',*,*,#84991,.T.); +#84991 = EDGE_CURVE('',#84984,#83691,#84992,.T.); +#84992 = LINE('',#84993,#84994); +#84993 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84994 = VECTOR('',#84995,1.); +#84995 = DIRECTION('',(0.,1.,0.)); +#84996 = ORIENTED_EDGE('',*,*,#83690,.F.); +#84997 = PLANE('',#84998); +#84998 = AXIS2_PLACEMENT_3D('',#84999,#85000,#85001); +#84999 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#85000 = DIRECTION('',(-1.,0.,0.)); +#85001 = DIRECTION('',(0.,1.,0.)); +#85002 = ADVANCED_FACE('',(#85003),#85022,.T.); +#85003 = FACE_BOUND('',#85004,.T.); +#85004 = EDGE_LOOP('',(#85005,#85014,#85020,#85021)); +#85005 = ORIENTED_EDGE('',*,*,#85006,.F.); +#85006 = EDGE_CURVE('',#85007,#84976,#85009,.T.); +#85007 = VERTEX_POINT('',#85008); +#85008 = CARTESIAN_POINT('',(0.60827625303,-2.,5.1)); +#85009 = CIRCLE('',#85010,1.9); +#85010 = AXIS2_PLACEMENT_3D('',#85011,#85012,#85013); +#85011 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85012 = DIRECTION('',(0.,0.,1.)); +#85013 = DIRECTION('',(1.,0.,-0.)); +#85014 = ORIENTED_EDGE('',*,*,#85015,.T.); +#85015 = EDGE_CURVE('',#85007,#83742,#85016,.T.); +#85016 = LINE('',#85017,#85018); +#85017 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#85018 = VECTOR('',#85019,1.); +#85019 = DIRECTION('',(1.,0.,0.)); +#85020 = ORIENTED_EDGE('',*,*,#83750,.T.); +#85021 = ORIENTED_EDGE('',*,*,#84975,.T.); +#85022 = PLANE('',#85023); +#85023 = AXIS2_PLACEMENT_3D('',#85024,#85025,#85026); +#85024 = CARTESIAN_POINT('',(0.,0.,5.1)); +#85025 = DIRECTION('',(0.,0.,1.)); +#85026 = DIRECTION('',(1.,0.,-0.)); +#85027 = ADVANCED_FACE('',(#85028),#85054,.T.); +#85028 = FACE_BOUND('',#85029,.T.); +#85029 = EDGE_LOOP('',(#85030,#85041,#85047,#85048)); +#85030 = ORIENTED_EDGE('',*,*,#85031,.F.); +#85031 = EDGE_CURVE('',#85032,#85034,#85036,.T.); +#85032 = VERTEX_POINT('',#85033); +#85033 = CARTESIAN_POINT('',(-1.4,-1.484523257866,5.1)); +#85034 = VERTEX_POINT('',#85035); +#85035 = CARTESIAN_POINT('',(-0.60827625303,-2.,5.1)); +#85036 = CIRCLE('',#85037,1.9); +#85037 = AXIS2_PLACEMENT_3D('',#85038,#85039,#85040); +#85038 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85039 = DIRECTION('',(0.,0.,1.)); +#85040 = DIRECTION('',(1.,0.,-0.)); +#85041 = ORIENTED_EDGE('',*,*,#85042,.T.); +#85042 = EDGE_CURVE('',#85032,#83725,#85043,.T.); +#85043 = LINE('',#85044,#85045); +#85044 = CARTESIAN_POINT('',(-1.4,2.,5.1)); +#85045 = VECTOR('',#85046,1.); +#85046 = DIRECTION('',(0.,-1.,0.)); +#85047 = ORIENTED_EDGE('',*,*,#83732,.T.); +#85048 = ORIENTED_EDGE('',*,*,#85049,.T.); +#85049 = EDGE_CURVE('',#83733,#85034,#85050,.T.); +#85050 = LINE('',#85051,#85052); +#85051 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#85052 = VECTOR('',#85053,1.); +#85053 = DIRECTION('',(1.,0.,0.)); +#85054 = PLANE('',#85055); +#85055 = AXIS2_PLACEMENT_3D('',#85056,#85057,#85058); +#85056 = CARTESIAN_POINT('',(0.,0.,5.1)); +#85057 = DIRECTION('',(0.,0.,1.)); +#85058 = DIRECTION('',(1.,0.,-0.)); +#85059 = ADVANCED_FACE('',(#85060),#85085,.F.); +#85060 = FACE_BOUND('',#85061,.F.); +#85061 = EDGE_LOOP('',(#85062,#85063,#85071,#85077,#85078,#85079)); +#85062 = ORIENTED_EDGE('',*,*,#83707,.T.); +#85063 = ORIENTED_EDGE('',*,*,#85064,.T.); +#85064 = EDGE_CURVE('',#83699,#85065,#85067,.T.); +#85065 = VERTEX_POINT('',#85066); +#85066 = CARTESIAN_POINT('',(-1.4,1.084523257866,5.1)); +#85067 = LINE('',#85068,#85069); +#85068 = CARTESIAN_POINT('',(-1.4,2.,5.1)); +#85069 = VECTOR('',#85070,1.); +#85070 = DIRECTION('',(0.,-1.,0.)); +#85071 = ORIENTED_EDGE('',*,*,#85072,.T.); +#85072 = EDGE_CURVE('',#85065,#85032,#85073,.T.); +#85073 = LINE('',#85074,#85075); +#85074 = CARTESIAN_POINT('',(-1.4,2.,5.1)); +#85075 = VECTOR('',#85076,1.); +#85076 = DIRECTION('',(0.,-1.,0.)); +#85077 = ORIENTED_EDGE('',*,*,#85042,.T.); +#85078 = ORIENTED_EDGE('',*,*,#83724,.F.); +#85079 = ORIENTED_EDGE('',*,*,#85080,.F.); +#85080 = EDGE_CURVE('',#83708,#83716,#85081,.T.); +#85081 = LINE('',#85082,#85083); +#85082 = CARTESIAN_POINT('',(-1.4,2.,2.4)); +#85083 = VECTOR('',#85084,1.); +#85084 = DIRECTION('',(0.,-1.,0.)); +#85085 = PLANE('',#85086); +#85086 = AXIS2_PLACEMENT_3D('',#85087,#85088,#85089); +#85087 = CARTESIAN_POINT('',(-1.4,2.,2.4)); +#85088 = DIRECTION('',(1.,0.,-0.)); +#85089 = DIRECTION('',(0.,-1.,0.)); +#85090 = ADVANCED_FACE('',(#85091),#85095,.F.); +#85091 = FACE_BOUND('',#85092,.F.); +#85092 = EDGE_LOOP('',(#85093,#85094)); +#85093 = ORIENTED_EDGE('',*,*,#85080,.T.); +#85094 = ORIENTED_EDGE('',*,*,#83715,.F.); +#85095 = PLANE('',#85096); +#85096 = AXIS2_PLACEMENT_3D('',#85097,#85098,#85099); +#85097 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#85098 = DIRECTION('',(0.,0.,-1.)); +#85099 = DIRECTION('',(1.,0.,0.)); +#85100 = ADVANCED_FACE('',(#85101),#85113,.T.); +#85101 = FACE_BOUND('',#85102,.T.); +#85102 = EDGE_LOOP('',(#85103,#85104,#85105,#85112)); +#85103 = ORIENTED_EDGE('',*,*,#83698,.T.); +#85104 = ORIENTED_EDGE('',*,*,#85064,.T.); +#85105 = ORIENTED_EDGE('',*,*,#85106,.F.); +#85106 = EDGE_CURVE('',#84984,#85065,#85107,.T.); +#85107 = CIRCLE('',#85108,1.9); +#85108 = AXIS2_PLACEMENT_3D('',#85109,#85110,#85111); +#85109 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85110 = DIRECTION('',(0.,0.,1.)); +#85111 = DIRECTION('',(1.,0.,-0.)); +#85112 = ORIENTED_EDGE('',*,*,#84991,.T.); +#85113 = PLANE('',#85114); +#85114 = AXIS2_PLACEMENT_3D('',#85115,#85116,#85117); +#85115 = CARTESIAN_POINT('',(0.,0.,5.1)); +#85116 = DIRECTION('',(0.,0.,1.)); +#85117 = DIRECTION('',(1.,0.,-0.)); +#85118 = ADVANCED_FACE('',(#85119,#85134),#85168,.F.); +#85119 = FACE_BOUND('',#85120,.F.); +#85120 = EDGE_LOOP('',(#85121,#85122,#85123,#85124,#85130,#85131,#85132, + #85133)); +#85121 = ORIENTED_EDGE('',*,*,#83847,.T.); +#85122 = ORIENTED_EDGE('',*,*,#83871,.T.); +#85123 = ORIENTED_EDGE('',*,*,#84389,.T.); +#85124 = ORIENTED_EDGE('',*,*,#85125,.T.); +#85125 = EDGE_CURVE('',#84374,#84347,#85126,.T.); +#85126 = LINE('',#85127,#85128); +#85127 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#85128 = VECTOR('',#85129,1.); +#85129 = DIRECTION('',(1.,0.,0.)); +#85130 = ORIENTED_EDGE('',*,*,#84355,.T.); +#85131 = ORIENTED_EDGE('',*,*,#83864,.T.); +#85132 = ORIENTED_EDGE('',*,*,#83823,.F.); +#85133 = ORIENTED_EDGE('',*,*,#83799,.F.); +#85134 = FACE_BOUND('',#85135,.F.); +#85135 = EDGE_LOOP('',(#85136,#85146,#85154,#85162)); +#85136 = ORIENTED_EDGE('',*,*,#85137,.T.); +#85137 = EDGE_CURVE('',#85138,#85140,#85142,.T.); +#85138 = VERTEX_POINT('',#85139); +#85139 = CARTESIAN_POINT('',(18.75,-2.,5.)); +#85140 = VERTEX_POINT('',#85141); +#85141 = CARTESIAN_POINT('',(18.75,-2.,2.5)); +#85142 = LINE('',#85143,#85144); +#85143 = CARTESIAN_POINT('',(18.75,-2.,5.)); +#85144 = VECTOR('',#85145,1.); +#85145 = DIRECTION('',(0.,0.,-1.)); +#85146 = ORIENTED_EDGE('',*,*,#85147,.T.); +#85147 = EDGE_CURVE('',#85140,#85148,#85150,.T.); +#85148 = VERTEX_POINT('',#85149); +#85149 = CARTESIAN_POINT('',(21.25,-2.,2.5)); +#85150 = LINE('',#85151,#85152); +#85151 = CARTESIAN_POINT('',(18.75,-2.,2.5)); +#85152 = VECTOR('',#85153,1.); +#85153 = DIRECTION('',(1.,0.,0.)); +#85154 = ORIENTED_EDGE('',*,*,#85155,.T.); +#85155 = EDGE_CURVE('',#85148,#85156,#85158,.T.); +#85156 = VERTEX_POINT('',#85157); +#85157 = CARTESIAN_POINT('',(21.25,-2.,5.)); +#85158 = LINE('',#85159,#85160); +#85159 = CARTESIAN_POINT('',(21.25,-2.,2.5)); +#85160 = VECTOR('',#85161,1.); +#85161 = DIRECTION('',(0.,0.,1.)); +#85162 = ORIENTED_EDGE('',*,*,#85163,.T.); +#85163 = EDGE_CURVE('',#85156,#85138,#85164,.T.); +#85164 = LINE('',#85165,#85166); +#85165 = CARTESIAN_POINT('',(21.25,-2.,5.)); +#85166 = VECTOR('',#85167,1.); +#85167 = DIRECTION('',(-1.,0.,0.)); +#85168 = PLANE('',#85169); +#85169 = AXIS2_PLACEMENT_3D('',#85170,#85171,#85172); +#85170 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#85171 = DIRECTION('',(0.,1.,0.)); +#85172 = DIRECTION('',(1.,0.,0.)); +#85173 = ADVANCED_FACE('',(#85174,#85189),#85223,.F.); +#85174 = FACE_BOUND('',#85175,.F.); +#85175 = EDGE_LOOP('',(#85176,#85177,#85178,#85179,#85185,#85186,#85187, + #85188)); +#85176 = ORIENTED_EDGE('',*,*,#83950,.T.); +#85177 = ORIENTED_EDGE('',*,*,#83974,.T.); +#85178 = ORIENTED_EDGE('',*,*,#84554,.T.); +#85179 = ORIENTED_EDGE('',*,*,#85180,.T.); +#85180 = EDGE_CURVE('',#84539,#84512,#85181,.T.); +#85181 = LINE('',#85182,#85183); +#85182 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#85183 = VECTOR('',#85184,1.); +#85184 = DIRECTION('',(1.,0.,0.)); +#85185 = ORIENTED_EDGE('',*,*,#84520,.T.); +#85186 = ORIENTED_EDGE('',*,*,#83967,.T.); +#85187 = ORIENTED_EDGE('',*,*,#83926,.F.); +#85188 = ORIENTED_EDGE('',*,*,#83902,.F.); +#85189 = FACE_BOUND('',#85190,.F.); +#85190 = EDGE_LOOP('',(#85191,#85201,#85209,#85217)); +#85191 = ORIENTED_EDGE('',*,*,#85192,.T.); +#85192 = EDGE_CURVE('',#85193,#85195,#85197,.T.); +#85193 = VERTEX_POINT('',#85194); +#85194 = CARTESIAN_POINT('',(13.75,-2.,5.)); +#85195 = VERTEX_POINT('',#85196); +#85196 = CARTESIAN_POINT('',(13.75,-2.,2.5)); +#85197 = LINE('',#85198,#85199); +#85198 = CARTESIAN_POINT('',(13.75,-2.,5.)); +#85199 = VECTOR('',#85200,1.); +#85200 = DIRECTION('',(0.,0.,-1.)); +#85201 = ORIENTED_EDGE('',*,*,#85202,.T.); +#85202 = EDGE_CURVE('',#85195,#85203,#85205,.T.); +#85203 = VERTEX_POINT('',#85204); +#85204 = CARTESIAN_POINT('',(16.25,-2.,2.5)); +#85205 = LINE('',#85206,#85207); +#85206 = CARTESIAN_POINT('',(13.75,-2.,2.5)); +#85207 = VECTOR('',#85208,1.); +#85208 = DIRECTION('',(1.,0.,0.)); +#85209 = ORIENTED_EDGE('',*,*,#85210,.T.); +#85210 = EDGE_CURVE('',#85203,#85211,#85213,.T.); +#85211 = VERTEX_POINT('',#85212); +#85212 = CARTESIAN_POINT('',(16.25,-2.,5.)); +#85213 = LINE('',#85214,#85215); +#85214 = CARTESIAN_POINT('',(16.25,-2.,2.5)); +#85215 = VECTOR('',#85216,1.); +#85216 = DIRECTION('',(0.,0.,1.)); +#85217 = ORIENTED_EDGE('',*,*,#85218,.T.); +#85218 = EDGE_CURVE('',#85211,#85193,#85219,.T.); +#85219 = LINE('',#85220,#85221); +#85220 = CARTESIAN_POINT('',(16.25,-2.,5.)); +#85221 = VECTOR('',#85222,1.); +#85222 = DIRECTION('',(-1.,0.,0.)); +#85223 = PLANE('',#85224); +#85224 = AXIS2_PLACEMENT_3D('',#85225,#85226,#85227); +#85225 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#85226 = DIRECTION('',(0.,1.,0.)); +#85227 = DIRECTION('',(1.,0.,0.)); +#85228 = ADVANCED_FACE('',(#85229,#85244),#85278,.F.); +#85229 = FACE_BOUND('',#85230,.F.); +#85230 = EDGE_LOOP('',(#85231,#85232,#85233,#85234,#85240,#85241,#85242, + #85243)); +#85231 = ORIENTED_EDGE('',*,*,#84053,.T.); +#85232 = ORIENTED_EDGE('',*,*,#84077,.T.); +#85233 = ORIENTED_EDGE('',*,*,#84719,.T.); +#85234 = ORIENTED_EDGE('',*,*,#85235,.T.); +#85235 = EDGE_CURVE('',#84704,#84677,#85236,.T.); +#85236 = LINE('',#85237,#85238); +#85237 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#85238 = VECTOR('',#85239,1.); +#85239 = DIRECTION('',(1.,0.,0.)); +#85240 = ORIENTED_EDGE('',*,*,#84685,.T.); +#85241 = ORIENTED_EDGE('',*,*,#84070,.T.); +#85242 = ORIENTED_EDGE('',*,*,#84029,.F.); +#85243 = ORIENTED_EDGE('',*,*,#84005,.F.); +#85244 = FACE_BOUND('',#85245,.F.); +#85245 = EDGE_LOOP('',(#85246,#85256,#85264,#85272)); +#85246 = ORIENTED_EDGE('',*,*,#85247,.T.); +#85247 = EDGE_CURVE('',#85248,#85250,#85252,.T.); +#85248 = VERTEX_POINT('',#85249); +#85249 = CARTESIAN_POINT('',(8.75,-2.,5.)); +#85250 = VERTEX_POINT('',#85251); +#85251 = CARTESIAN_POINT('',(8.75,-2.,2.5)); +#85252 = LINE('',#85253,#85254); +#85253 = CARTESIAN_POINT('',(8.75,-2.,5.)); +#85254 = VECTOR('',#85255,1.); +#85255 = DIRECTION('',(0.,0.,-1.)); +#85256 = ORIENTED_EDGE('',*,*,#85257,.T.); +#85257 = EDGE_CURVE('',#85250,#85258,#85260,.T.); +#85258 = VERTEX_POINT('',#85259); +#85259 = CARTESIAN_POINT('',(11.25,-2.,2.5)); +#85260 = LINE('',#85261,#85262); +#85261 = CARTESIAN_POINT('',(8.75,-2.,2.5)); +#85262 = VECTOR('',#85263,1.); +#85263 = DIRECTION('',(1.,0.,0.)); +#85264 = ORIENTED_EDGE('',*,*,#85265,.T.); +#85265 = EDGE_CURVE('',#85258,#85266,#85268,.T.); +#85266 = VERTEX_POINT('',#85267); +#85267 = CARTESIAN_POINT('',(11.25,-2.,5.)); +#85268 = LINE('',#85269,#85270); +#85269 = CARTESIAN_POINT('',(11.25,-2.,2.5)); +#85270 = VECTOR('',#85271,1.); +#85271 = DIRECTION('',(0.,0.,1.)); +#85272 = ORIENTED_EDGE('',*,*,#85273,.T.); +#85273 = EDGE_CURVE('',#85266,#85248,#85274,.T.); +#85274 = LINE('',#85275,#85276); +#85275 = CARTESIAN_POINT('',(11.25,-2.,5.)); +#85276 = VECTOR('',#85277,1.); +#85277 = DIRECTION('',(-1.,0.,0.)); +#85278 = PLANE('',#85279); +#85279 = AXIS2_PLACEMENT_3D('',#85280,#85281,#85282); +#85280 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#85281 = DIRECTION('',(0.,1.,0.)); +#85282 = DIRECTION('',(1.,0.,0.)); +#85283 = ADVANCED_FACE('',(#85284,#85299),#85333,.F.); +#85284 = FACE_BOUND('',#85285,.F.); +#85285 = EDGE_LOOP('',(#85286,#85287,#85288,#85289,#85295,#85296,#85297, + #85298)); +#85286 = ORIENTED_EDGE('',*,*,#84156,.T.); +#85287 = ORIENTED_EDGE('',*,*,#84180,.T.); +#85288 = ORIENTED_EDGE('',*,*,#84884,.T.); +#85289 = ORIENTED_EDGE('',*,*,#85290,.T.); +#85290 = EDGE_CURVE('',#84869,#84842,#85291,.T.); +#85291 = LINE('',#85292,#85293); +#85292 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#85293 = VECTOR('',#85294,1.); +#85294 = DIRECTION('',(1.,0.,0.)); +#85295 = ORIENTED_EDGE('',*,*,#84850,.T.); +#85296 = ORIENTED_EDGE('',*,*,#84173,.T.); +#85297 = ORIENTED_EDGE('',*,*,#84132,.F.); +#85298 = ORIENTED_EDGE('',*,*,#84108,.F.); +#85299 = FACE_BOUND('',#85300,.F.); +#85300 = EDGE_LOOP('',(#85301,#85311,#85319,#85327)); +#85301 = ORIENTED_EDGE('',*,*,#85302,.T.); +#85302 = EDGE_CURVE('',#85303,#85305,#85307,.T.); +#85303 = VERTEX_POINT('',#85304); +#85304 = CARTESIAN_POINT('',(3.75,-2.,5.)); +#85305 = VERTEX_POINT('',#85306); +#85306 = CARTESIAN_POINT('',(3.75,-2.,2.5)); +#85307 = LINE('',#85308,#85309); +#85308 = CARTESIAN_POINT('',(3.75,-2.,5.)); +#85309 = VECTOR('',#85310,1.); +#85310 = DIRECTION('',(0.,0.,-1.)); +#85311 = ORIENTED_EDGE('',*,*,#85312,.T.); +#85312 = EDGE_CURVE('',#85305,#85313,#85315,.T.); +#85313 = VERTEX_POINT('',#85314); +#85314 = CARTESIAN_POINT('',(6.25,-2.,2.5)); +#85315 = LINE('',#85316,#85317); +#85316 = CARTESIAN_POINT('',(3.75,-2.,2.5)); +#85317 = VECTOR('',#85318,1.); +#85318 = DIRECTION('',(1.,0.,0.)); +#85319 = ORIENTED_EDGE('',*,*,#85320,.T.); +#85320 = EDGE_CURVE('',#85313,#85321,#85323,.T.); +#85321 = VERTEX_POINT('',#85322); +#85322 = CARTESIAN_POINT('',(6.25,-2.,5.)); +#85323 = LINE('',#85324,#85325); +#85324 = CARTESIAN_POINT('',(6.25,-2.,2.5)); +#85325 = VECTOR('',#85326,1.); +#85326 = DIRECTION('',(0.,0.,1.)); +#85327 = ORIENTED_EDGE('',*,*,#85328,.T.); +#85328 = EDGE_CURVE('',#85321,#85303,#85329,.T.); +#85329 = LINE('',#85330,#85331); +#85330 = CARTESIAN_POINT('',(6.25,-2.,5.)); +#85331 = VECTOR('',#85332,1.); +#85332 = DIRECTION('',(-1.,0.,0.)); +#85333 = PLANE('',#85334); +#85334 = AXIS2_PLACEMENT_3D('',#85335,#85336,#85337); +#85335 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#85336 = DIRECTION('',(0.,1.,0.)); +#85337 = DIRECTION('',(1.,0.,0.)); +#85338 = ADVANCED_FACE('',(#85339,#85354),#85388,.F.); +#85339 = FACE_BOUND('',#85340,.F.); +#85340 = EDGE_LOOP('',(#85341,#85342,#85343,#85344,#85350,#85351,#85352, + #85353)); +#85341 = ORIENTED_EDGE('',*,*,#84259,.T.); +#85342 = ORIENTED_EDGE('',*,*,#84283,.T.); +#85343 = ORIENTED_EDGE('',*,*,#85049,.T.); +#85344 = ORIENTED_EDGE('',*,*,#85345,.T.); +#85345 = EDGE_CURVE('',#85034,#85007,#85346,.T.); +#85346 = LINE('',#85347,#85348); +#85347 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#85348 = VECTOR('',#85349,1.); +#85349 = DIRECTION('',(1.,0.,0.)); +#85350 = ORIENTED_EDGE('',*,*,#85015,.T.); +#85351 = ORIENTED_EDGE('',*,*,#84276,.T.); +#85352 = ORIENTED_EDGE('',*,*,#84235,.F.); +#85353 = ORIENTED_EDGE('',*,*,#84211,.F.); +#85354 = FACE_BOUND('',#85355,.F.); +#85355 = EDGE_LOOP('',(#85356,#85366,#85374,#85382)); +#85356 = ORIENTED_EDGE('',*,*,#85357,.T.); +#85357 = EDGE_CURVE('',#85358,#85360,#85362,.T.); +#85358 = VERTEX_POINT('',#85359); +#85359 = CARTESIAN_POINT('',(-1.25,-2.,5.)); +#85360 = VERTEX_POINT('',#85361); +#85361 = CARTESIAN_POINT('',(-1.25,-2.,2.5)); +#85362 = LINE('',#85363,#85364); +#85363 = CARTESIAN_POINT('',(-1.25,-2.,5.)); +#85364 = VECTOR('',#85365,1.); +#85365 = DIRECTION('',(0.,0.,-1.)); +#85366 = ORIENTED_EDGE('',*,*,#85367,.T.); +#85367 = EDGE_CURVE('',#85360,#85368,#85370,.T.); +#85368 = VERTEX_POINT('',#85369); +#85369 = CARTESIAN_POINT('',(1.25,-2.,2.5)); +#85370 = LINE('',#85371,#85372); +#85371 = CARTESIAN_POINT('',(-1.25,-2.,2.5)); +#85372 = VECTOR('',#85373,1.); +#85373 = DIRECTION('',(1.,0.,0.)); +#85374 = ORIENTED_EDGE('',*,*,#85375,.T.); +#85375 = EDGE_CURVE('',#85368,#85376,#85378,.T.); +#85376 = VERTEX_POINT('',#85377); +#85377 = CARTESIAN_POINT('',(1.25,-2.,5.)); +#85378 = LINE('',#85379,#85380); +#85379 = CARTESIAN_POINT('',(1.25,-2.,2.5)); +#85380 = VECTOR('',#85381,1.); +#85381 = DIRECTION('',(0.,0.,1.)); +#85382 = ORIENTED_EDGE('',*,*,#85383,.T.); +#85383 = EDGE_CURVE('',#85376,#85358,#85384,.T.); +#85384 = LINE('',#85385,#85386); +#85385 = CARTESIAN_POINT('',(1.25,-2.,5.)); +#85386 = VECTOR('',#85387,1.); +#85387 = DIRECTION('',(-1.,0.,0.)); +#85388 = PLANE('',#85389); +#85389 = AXIS2_PLACEMENT_3D('',#85390,#85391,#85392); +#85390 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#85391 = DIRECTION('',(0.,1.,0.)); +#85392 = DIRECTION('',(1.,0.,0.)); +#85393 = ADVANCED_FACE('',(#85394),#85413,.F.); +#85394 = FACE_BOUND('',#85395,.F.); +#85395 = EDGE_LOOP('',(#85396,#85405,#85412)); +#85396 = ORIENTED_EDGE('',*,*,#85397,.T.); +#85397 = EDGE_CURVE('',#84316,#85398,#85400,.T.); +#85398 = VERTEX_POINT('',#85399); +#85399 = CARTESIAN_POINT('',(21.9,-0.2,5.1)); +#85400 = CIRCLE('',#85401,1.9); +#85401 = AXIS2_PLACEMENT_3D('',#85402,#85403,#85404); +#85402 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85403 = DIRECTION('',(0.,0.,1.)); +#85404 = DIRECTION('',(1.,0.,-0.)); +#85405 = ORIENTED_EDGE('',*,*,#85406,.T.); +#85406 = EDGE_CURVE('',#85398,#84324,#85407,.T.); +#85407 = CIRCLE('',#85408,1.9); +#85408 = AXIS2_PLACEMENT_3D('',#85409,#85410,#85411); +#85409 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85410 = DIRECTION('',(0.,0.,1.)); +#85411 = DIRECTION('',(1.,0.,-0.)); +#85412 = ORIENTED_EDGE('',*,*,#84323,.F.); +#85413 = PLANE('',#85414); +#85414 = AXIS2_PLACEMENT_3D('',#85415,#85416,#85417); +#85415 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85416 = DIRECTION('',(0.,0.,1.)); +#85417 = DIRECTION('',(1.,0.,-0.)); +#85418 = ADVANCED_FACE('',(#85419),#85524,.T.); +#85419 = FACE_BOUND('',#85420,.T.); +#85420 = EDGE_LOOP('',(#85421,#85432,#85440,#85449,#85457,#85466,#85474, + #85483,#85491,#85498,#85504,#85505,#85506,#85513,#85514,#85521, + #85522,#85523)); +#85421 = ORIENTED_EDGE('',*,*,#85422,.F.); +#85422 = EDGE_CURVE('',#85423,#85425,#85427,.T.); +#85423 = VERTEX_POINT('',#85424); +#85424 = CARTESIAN_POINT('',(20.35,-2.067484939698,13.6)); +#85425 = VERTEX_POINT('',#85426); +#85426 = CARTESIAN_POINT('',(21.9,-0.2,13.6)); +#85427 = CIRCLE('',#85428,1.9); +#85428 = AXIS2_PLACEMENT_3D('',#85429,#85430,#85431); +#85429 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#85430 = DIRECTION('',(0.,0.,1.)); +#85431 = DIRECTION('',(1.,0.,-0.)); +#85432 = ORIENTED_EDGE('',*,*,#85433,.T.); +#85433 = EDGE_CURVE('',#85423,#85434,#85436,.T.); +#85434 = VERTEX_POINT('',#85435); +#85435 = CARTESIAN_POINT('',(20.35,-2.067484939698,12.9)); +#85436 = LINE('',#85437,#85438); +#85437 = CARTESIAN_POINT('',(20.35,-2.067484939698,5.1)); +#85438 = VECTOR('',#85439,1.); +#85439 = DIRECTION('',(-0.,-0.,-1.)); +#85440 = ORIENTED_EDGE('',*,*,#85441,.T.); +#85441 = EDGE_CURVE('',#85434,#85442,#85444,.T.); +#85442 = VERTEX_POINT('',#85443); +#85443 = CARTESIAN_POINT('',(19.65,-2.067484939698,12.9)); +#85444 = CIRCLE('',#85445,1.9); +#85445 = AXIS2_PLACEMENT_3D('',#85446,#85447,#85448); +#85446 = CARTESIAN_POINT('',(20.,-0.2,12.9)); +#85447 = DIRECTION('',(0.,0.,-1.)); +#85448 = DIRECTION('',(1.,0.,0.)); +#85449 = ORIENTED_EDGE('',*,*,#85450,.F.); +#85450 = EDGE_CURVE('',#85451,#85442,#85453,.T.); +#85451 = VERTEX_POINT('',#85452); +#85452 = CARTESIAN_POINT('',(19.65,-2.067484939698,13.6)); +#85453 = LINE('',#85454,#85455); +#85454 = CARTESIAN_POINT('',(19.65,-2.067484939698,5.1)); +#85455 = VECTOR('',#85456,1.); +#85456 = DIRECTION('',(-0.,-0.,-1.)); +#85457 = ORIENTED_EDGE('',*,*,#85458,.F.); +#85458 = EDGE_CURVE('',#85459,#85451,#85461,.T.); +#85459 = VERTEX_POINT('',#85460); +#85460 = CARTESIAN_POINT('',(19.65,1.667484939698,13.6)); +#85461 = CIRCLE('',#85462,1.9); +#85462 = AXIS2_PLACEMENT_3D('',#85463,#85464,#85465); +#85463 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#85464 = DIRECTION('',(0.,0.,1.)); +#85465 = DIRECTION('',(1.,0.,-0.)); +#85466 = ORIENTED_EDGE('',*,*,#85467,.T.); +#85467 = EDGE_CURVE('',#85459,#85468,#85470,.T.); +#85468 = VERTEX_POINT('',#85469); +#85469 = CARTESIAN_POINT('',(19.65,1.667484939698,12.9)); +#85470 = LINE('',#85471,#85472); +#85471 = CARTESIAN_POINT('',(19.65,1.667484939698,5.1)); +#85472 = VECTOR('',#85473,1.); +#85473 = DIRECTION('',(-0.,-0.,-1.)); +#85474 = ORIENTED_EDGE('',*,*,#85475,.T.); +#85475 = EDGE_CURVE('',#85468,#85476,#85478,.T.); +#85476 = VERTEX_POINT('',#85477); +#85477 = CARTESIAN_POINT('',(20.35,1.667484939698,12.9)); +#85478 = CIRCLE('',#85479,1.9); +#85479 = AXIS2_PLACEMENT_3D('',#85480,#85481,#85482); +#85480 = CARTESIAN_POINT('',(20.,-0.2,12.9)); +#85481 = DIRECTION('',(0.,0.,-1.)); +#85482 = DIRECTION('',(1.,0.,0.)); +#85483 = ORIENTED_EDGE('',*,*,#85484,.F.); +#85484 = EDGE_CURVE('',#85485,#85476,#85487,.T.); +#85485 = VERTEX_POINT('',#85486); +#85486 = CARTESIAN_POINT('',(20.35,1.667484939698,13.6)); +#85487 = LINE('',#85488,#85489); +#85488 = CARTESIAN_POINT('',(20.35,1.667484939698,5.1)); +#85489 = VECTOR('',#85490,1.); +#85490 = DIRECTION('',(-0.,-0.,-1.)); +#85491 = ORIENTED_EDGE('',*,*,#85492,.F.); +#85492 = EDGE_CURVE('',#85425,#85485,#85493,.T.); +#85493 = CIRCLE('',#85494,1.9); +#85494 = AXIS2_PLACEMENT_3D('',#85495,#85496,#85497); +#85495 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#85496 = DIRECTION('',(0.,0.,1.)); +#85497 = DIRECTION('',(1.,0.,-0.)); +#85498 = ORIENTED_EDGE('',*,*,#85499,.F.); +#85499 = EDGE_CURVE('',#85398,#85425,#85500,.T.); +#85500 = LINE('',#85501,#85502); +#85501 = CARTESIAN_POINT('',(21.9,-0.2,5.1)); +#85502 = VECTOR('',#85503,1.); +#85503 = DIRECTION('',(0.,0.,1.)); +#85504 = ORIENTED_EDGE('',*,*,#85406,.T.); +#85505 = ORIENTED_EDGE('',*,*,#84446,.T.); +#85506 = ORIENTED_EDGE('',*,*,#85507,.T.); +#85507 = EDGE_CURVE('',#84405,#84372,#85508,.T.); +#85508 = CIRCLE('',#85509,1.9); +#85509 = AXIS2_PLACEMENT_3D('',#85510,#85511,#85512); +#85510 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85511 = DIRECTION('',(0.,0.,1.)); +#85512 = DIRECTION('',(1.,0.,-0.)); +#85513 = ORIENTED_EDGE('',*,*,#84371,.T.); +#85514 = ORIENTED_EDGE('',*,*,#85515,.T.); +#85515 = EDGE_CURVE('',#84374,#84347,#85516,.T.); +#85516 = CIRCLE('',#85517,1.9); +#85517 = AXIS2_PLACEMENT_3D('',#85518,#85519,#85520); +#85518 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85519 = DIRECTION('',(0.,0.,1.)); +#85520 = DIRECTION('',(1.,0.,-0.)); +#85521 = ORIENTED_EDGE('',*,*,#84346,.T.); +#85522 = ORIENTED_EDGE('',*,*,#85397,.T.); +#85523 = ORIENTED_EDGE('',*,*,#85499,.T.); +#85524 = CYLINDRICAL_SURFACE('',#85525,1.9); +#85525 = AXIS2_PLACEMENT_3D('',#85526,#85527,#85528); +#85526 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85527 = DIRECTION('',(-0.,-0.,-1.)); +#85528 = DIRECTION('',(1.,0.,0.)); +#85529 = ADVANCED_FACE('',(#85530),#85534,.F.); +#85530 = FACE_BOUND('',#85531,.F.); +#85531 = EDGE_LOOP('',(#85532,#85533)); +#85532 = ORIENTED_EDGE('',*,*,#84412,.F.); +#85533 = ORIENTED_EDGE('',*,*,#85507,.T.); +#85534 = PLANE('',#85535); +#85535 = AXIS2_PLACEMENT_3D('',#85536,#85537,#85538); +#85536 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85537 = DIRECTION('',(0.,0.,1.)); +#85538 = DIRECTION('',(1.,0.,-0.)); +#85539 = ADVANCED_FACE('',(#85540),#85559,.F.); +#85540 = FACE_BOUND('',#85541,.F.); +#85541 = EDGE_LOOP('',(#85542,#85551,#85558)); +#85542 = ORIENTED_EDGE('',*,*,#85543,.T.); +#85543 = EDGE_CURVE('',#84481,#85544,#85546,.T.); +#85544 = VERTEX_POINT('',#85545); +#85545 = CARTESIAN_POINT('',(16.9,-0.2,5.1)); +#85546 = CIRCLE('',#85547,1.9); +#85547 = AXIS2_PLACEMENT_3D('',#85548,#85549,#85550); +#85548 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85549 = DIRECTION('',(0.,0.,1.)); +#85550 = DIRECTION('',(1.,0.,-0.)); +#85551 = ORIENTED_EDGE('',*,*,#85552,.T.); +#85552 = EDGE_CURVE('',#85544,#84489,#85553,.T.); +#85553 = CIRCLE('',#85554,1.9); +#85554 = AXIS2_PLACEMENT_3D('',#85555,#85556,#85557); +#85555 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85556 = DIRECTION('',(0.,0.,1.)); +#85557 = DIRECTION('',(1.,0.,-0.)); +#85558 = ORIENTED_EDGE('',*,*,#84488,.F.); +#85559 = PLANE('',#85560); +#85560 = AXIS2_PLACEMENT_3D('',#85561,#85562,#85563); +#85561 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85562 = DIRECTION('',(0.,0.,1.)); +#85563 = DIRECTION('',(1.,0.,-0.)); +#85564 = ADVANCED_FACE('',(#85565),#85670,.T.); +#85565 = FACE_BOUND('',#85566,.T.); +#85566 = EDGE_LOOP('',(#85567,#85578,#85586,#85595,#85603,#85612,#85620, + #85629,#85637,#85644,#85650,#85651,#85652,#85659,#85660,#85667, + #85668,#85669)); +#85567 = ORIENTED_EDGE('',*,*,#85568,.F.); +#85568 = EDGE_CURVE('',#85569,#85571,#85573,.T.); +#85569 = VERTEX_POINT('',#85570); +#85570 = CARTESIAN_POINT('',(15.35,-2.067484939698,13.6)); +#85571 = VERTEX_POINT('',#85572); +#85572 = CARTESIAN_POINT('',(16.9,-0.2,13.6)); +#85573 = CIRCLE('',#85574,1.9); +#85574 = AXIS2_PLACEMENT_3D('',#85575,#85576,#85577); +#85575 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#85576 = DIRECTION('',(0.,0.,1.)); +#85577 = DIRECTION('',(1.,0.,-0.)); +#85578 = ORIENTED_EDGE('',*,*,#85579,.T.); +#85579 = EDGE_CURVE('',#85569,#85580,#85582,.T.); +#85580 = VERTEX_POINT('',#85581); +#85581 = CARTESIAN_POINT('',(15.35,-2.067484939698,12.9)); +#85582 = LINE('',#85583,#85584); +#85583 = CARTESIAN_POINT('',(15.35,-2.067484939698,5.1)); +#85584 = VECTOR('',#85585,1.); +#85585 = DIRECTION('',(-0.,-0.,-1.)); +#85586 = ORIENTED_EDGE('',*,*,#85587,.T.); +#85587 = EDGE_CURVE('',#85580,#85588,#85590,.T.); +#85588 = VERTEX_POINT('',#85589); +#85589 = CARTESIAN_POINT('',(14.65,-2.067484939698,12.9)); +#85590 = CIRCLE('',#85591,1.9); +#85591 = AXIS2_PLACEMENT_3D('',#85592,#85593,#85594); +#85592 = CARTESIAN_POINT('',(15.,-0.2,12.9)); +#85593 = DIRECTION('',(0.,0.,-1.)); +#85594 = DIRECTION('',(1.,0.,0.)); +#85595 = ORIENTED_EDGE('',*,*,#85596,.F.); +#85596 = EDGE_CURVE('',#85597,#85588,#85599,.T.); +#85597 = VERTEX_POINT('',#85598); +#85598 = CARTESIAN_POINT('',(14.65,-2.067484939698,13.6)); +#85599 = LINE('',#85600,#85601); +#85600 = CARTESIAN_POINT('',(14.65,-2.067484939698,5.1)); +#85601 = VECTOR('',#85602,1.); +#85602 = DIRECTION('',(-0.,-0.,-1.)); +#85603 = ORIENTED_EDGE('',*,*,#85604,.F.); +#85604 = EDGE_CURVE('',#85605,#85597,#85607,.T.); +#85605 = VERTEX_POINT('',#85606); +#85606 = CARTESIAN_POINT('',(14.65,1.667484939698,13.6)); +#85607 = CIRCLE('',#85608,1.9); +#85608 = AXIS2_PLACEMENT_3D('',#85609,#85610,#85611); +#85609 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#85610 = DIRECTION('',(0.,0.,1.)); +#85611 = DIRECTION('',(1.,0.,-0.)); +#85612 = ORIENTED_EDGE('',*,*,#85613,.T.); +#85613 = EDGE_CURVE('',#85605,#85614,#85616,.T.); +#85614 = VERTEX_POINT('',#85615); +#85615 = CARTESIAN_POINT('',(14.65,1.667484939698,12.9)); +#85616 = LINE('',#85617,#85618); +#85617 = CARTESIAN_POINT('',(14.65,1.667484939698,5.1)); +#85618 = VECTOR('',#85619,1.); +#85619 = DIRECTION('',(-0.,-0.,-1.)); +#85620 = ORIENTED_EDGE('',*,*,#85621,.T.); +#85621 = EDGE_CURVE('',#85614,#85622,#85624,.T.); +#85622 = VERTEX_POINT('',#85623); +#85623 = CARTESIAN_POINT('',(15.35,1.667484939698,12.9)); +#85624 = CIRCLE('',#85625,1.9); +#85625 = AXIS2_PLACEMENT_3D('',#85626,#85627,#85628); +#85626 = CARTESIAN_POINT('',(15.,-0.2,12.9)); +#85627 = DIRECTION('',(0.,0.,-1.)); +#85628 = DIRECTION('',(1.,0.,0.)); +#85629 = ORIENTED_EDGE('',*,*,#85630,.F.); +#85630 = EDGE_CURVE('',#85631,#85622,#85633,.T.); +#85631 = VERTEX_POINT('',#85632); +#85632 = CARTESIAN_POINT('',(15.35,1.667484939698,13.6)); +#85633 = LINE('',#85634,#85635); +#85634 = CARTESIAN_POINT('',(15.35,1.667484939698,5.1)); +#85635 = VECTOR('',#85636,1.); +#85636 = DIRECTION('',(-0.,-0.,-1.)); +#85637 = ORIENTED_EDGE('',*,*,#85638,.F.); +#85638 = EDGE_CURVE('',#85571,#85631,#85639,.T.); +#85639 = CIRCLE('',#85640,1.9); +#85640 = AXIS2_PLACEMENT_3D('',#85641,#85642,#85643); +#85641 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#85642 = DIRECTION('',(0.,0.,1.)); +#85643 = DIRECTION('',(1.,0.,-0.)); +#85644 = ORIENTED_EDGE('',*,*,#85645,.F.); +#85645 = EDGE_CURVE('',#85544,#85571,#85646,.T.); +#85646 = LINE('',#85647,#85648); +#85647 = CARTESIAN_POINT('',(16.9,-0.2,5.1)); +#85648 = VECTOR('',#85649,1.); +#85649 = DIRECTION('',(0.,0.,1.)); +#85650 = ORIENTED_EDGE('',*,*,#85552,.T.); +#85651 = ORIENTED_EDGE('',*,*,#84611,.T.); +#85652 = ORIENTED_EDGE('',*,*,#85653,.T.); +#85653 = EDGE_CURVE('',#84570,#84537,#85654,.T.); +#85654 = CIRCLE('',#85655,1.9); +#85655 = AXIS2_PLACEMENT_3D('',#85656,#85657,#85658); +#85656 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85657 = DIRECTION('',(0.,0.,1.)); +#85658 = DIRECTION('',(1.,0.,-0.)); +#85659 = ORIENTED_EDGE('',*,*,#84536,.T.); +#85660 = ORIENTED_EDGE('',*,*,#85661,.T.); +#85661 = EDGE_CURVE('',#84539,#84512,#85662,.T.); +#85662 = CIRCLE('',#85663,1.9); +#85663 = AXIS2_PLACEMENT_3D('',#85664,#85665,#85666); +#85664 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85665 = DIRECTION('',(0.,0.,1.)); +#85666 = DIRECTION('',(1.,0.,-0.)); +#85667 = ORIENTED_EDGE('',*,*,#84511,.T.); +#85668 = ORIENTED_EDGE('',*,*,#85543,.T.); +#85669 = ORIENTED_EDGE('',*,*,#85645,.T.); +#85670 = CYLINDRICAL_SURFACE('',#85671,1.9); +#85671 = AXIS2_PLACEMENT_3D('',#85672,#85673,#85674); +#85672 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85673 = DIRECTION('',(-0.,-0.,-1.)); +#85674 = DIRECTION('',(1.,0.,0.)); +#85675 = ADVANCED_FACE('',(#85676),#85680,.F.); +#85676 = FACE_BOUND('',#85677,.F.); +#85677 = EDGE_LOOP('',(#85678,#85679)); +#85678 = ORIENTED_EDGE('',*,*,#84577,.F.); +#85679 = ORIENTED_EDGE('',*,*,#85653,.T.); +#85680 = PLANE('',#85681); +#85681 = AXIS2_PLACEMENT_3D('',#85682,#85683,#85684); +#85682 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85683 = DIRECTION('',(0.,0.,1.)); +#85684 = DIRECTION('',(1.,0.,-0.)); +#85685 = ADVANCED_FACE('',(#85686),#85705,.F.); +#85686 = FACE_BOUND('',#85687,.F.); +#85687 = EDGE_LOOP('',(#85688,#85697,#85704)); +#85688 = ORIENTED_EDGE('',*,*,#85689,.T.); +#85689 = EDGE_CURVE('',#84646,#85690,#85692,.T.); +#85690 = VERTEX_POINT('',#85691); +#85691 = CARTESIAN_POINT('',(11.9,-0.2,5.1)); +#85692 = CIRCLE('',#85693,1.9); +#85693 = AXIS2_PLACEMENT_3D('',#85694,#85695,#85696); +#85694 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85695 = DIRECTION('',(0.,0.,1.)); +#85696 = DIRECTION('',(1.,0.,-0.)); +#85697 = ORIENTED_EDGE('',*,*,#85698,.T.); +#85698 = EDGE_CURVE('',#85690,#84654,#85699,.T.); +#85699 = CIRCLE('',#85700,1.9); +#85700 = AXIS2_PLACEMENT_3D('',#85701,#85702,#85703); +#85701 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85702 = DIRECTION('',(0.,0.,1.)); +#85703 = DIRECTION('',(1.,0.,-0.)); +#85704 = ORIENTED_EDGE('',*,*,#84653,.F.); +#85705 = PLANE('',#85706); +#85706 = AXIS2_PLACEMENT_3D('',#85707,#85708,#85709); +#85707 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85708 = DIRECTION('',(0.,0.,1.)); +#85709 = DIRECTION('',(1.,0.,-0.)); +#85710 = ADVANCED_FACE('',(#85711),#85816,.T.); +#85711 = FACE_BOUND('',#85712,.T.); +#85712 = EDGE_LOOP('',(#85713,#85724,#85732,#85741,#85749,#85758,#85766, + #85775,#85783,#85790,#85796,#85797,#85798,#85805,#85806,#85813, + #85814,#85815)); +#85713 = ORIENTED_EDGE('',*,*,#85714,.F.); +#85714 = EDGE_CURVE('',#85715,#85717,#85719,.T.); +#85715 = VERTEX_POINT('',#85716); +#85716 = CARTESIAN_POINT('',(10.35,-2.067484939698,13.6)); +#85717 = VERTEX_POINT('',#85718); +#85718 = CARTESIAN_POINT('',(11.9,-0.2,13.6)); +#85719 = CIRCLE('',#85720,1.9); +#85720 = AXIS2_PLACEMENT_3D('',#85721,#85722,#85723); +#85721 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#85722 = DIRECTION('',(0.,0.,1.)); +#85723 = DIRECTION('',(1.,0.,-0.)); +#85724 = ORIENTED_EDGE('',*,*,#85725,.T.); +#85725 = EDGE_CURVE('',#85715,#85726,#85728,.T.); +#85726 = VERTEX_POINT('',#85727); +#85727 = CARTESIAN_POINT('',(10.35,-2.067484939698,12.9)); +#85728 = LINE('',#85729,#85730); +#85729 = CARTESIAN_POINT('',(10.35,-2.067484939698,5.1)); +#85730 = VECTOR('',#85731,1.); +#85731 = DIRECTION('',(-0.,-0.,-1.)); +#85732 = ORIENTED_EDGE('',*,*,#85733,.T.); +#85733 = EDGE_CURVE('',#85726,#85734,#85736,.T.); +#85734 = VERTEX_POINT('',#85735); +#85735 = CARTESIAN_POINT('',(9.65,-2.067484939698,12.9)); +#85736 = CIRCLE('',#85737,1.9); +#85737 = AXIS2_PLACEMENT_3D('',#85738,#85739,#85740); +#85738 = CARTESIAN_POINT('',(10.,-0.2,12.9)); +#85739 = DIRECTION('',(0.,0.,-1.)); +#85740 = DIRECTION('',(1.,0.,0.)); +#85741 = ORIENTED_EDGE('',*,*,#85742,.F.); +#85742 = EDGE_CURVE('',#85743,#85734,#85745,.T.); +#85743 = VERTEX_POINT('',#85744); +#85744 = CARTESIAN_POINT('',(9.65,-2.067484939698,13.6)); +#85745 = LINE('',#85746,#85747); +#85746 = CARTESIAN_POINT('',(9.65,-2.067484939698,5.1)); +#85747 = VECTOR('',#85748,1.); +#85748 = DIRECTION('',(-0.,-0.,-1.)); +#85749 = ORIENTED_EDGE('',*,*,#85750,.F.); +#85750 = EDGE_CURVE('',#85751,#85743,#85753,.T.); +#85751 = VERTEX_POINT('',#85752); +#85752 = CARTESIAN_POINT('',(9.65,1.667484939698,13.6)); +#85753 = CIRCLE('',#85754,1.9); +#85754 = AXIS2_PLACEMENT_3D('',#85755,#85756,#85757); +#85755 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#85756 = DIRECTION('',(0.,0.,1.)); +#85757 = DIRECTION('',(1.,0.,-0.)); +#85758 = ORIENTED_EDGE('',*,*,#85759,.T.); +#85759 = EDGE_CURVE('',#85751,#85760,#85762,.T.); +#85760 = VERTEX_POINT('',#85761); +#85761 = CARTESIAN_POINT('',(9.65,1.667484939698,12.9)); +#85762 = LINE('',#85763,#85764); +#85763 = CARTESIAN_POINT('',(9.65,1.667484939698,5.1)); +#85764 = VECTOR('',#85765,1.); +#85765 = DIRECTION('',(-0.,-0.,-1.)); +#85766 = ORIENTED_EDGE('',*,*,#85767,.T.); +#85767 = EDGE_CURVE('',#85760,#85768,#85770,.T.); +#85768 = VERTEX_POINT('',#85769); +#85769 = CARTESIAN_POINT('',(10.35,1.667484939698,12.9)); +#85770 = CIRCLE('',#85771,1.9); +#85771 = AXIS2_PLACEMENT_3D('',#85772,#85773,#85774); +#85772 = CARTESIAN_POINT('',(10.,-0.2,12.9)); +#85773 = DIRECTION('',(0.,0.,-1.)); +#85774 = DIRECTION('',(1.,0.,0.)); +#85775 = ORIENTED_EDGE('',*,*,#85776,.F.); +#85776 = EDGE_CURVE('',#85777,#85768,#85779,.T.); +#85777 = VERTEX_POINT('',#85778); +#85778 = CARTESIAN_POINT('',(10.35,1.667484939698,13.6)); +#85779 = LINE('',#85780,#85781); +#85780 = CARTESIAN_POINT('',(10.35,1.667484939698,5.1)); +#85781 = VECTOR('',#85782,1.); +#85782 = DIRECTION('',(-0.,-0.,-1.)); +#85783 = ORIENTED_EDGE('',*,*,#85784,.F.); +#85784 = EDGE_CURVE('',#85717,#85777,#85785,.T.); +#85785 = CIRCLE('',#85786,1.9); +#85786 = AXIS2_PLACEMENT_3D('',#85787,#85788,#85789); +#85787 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#85788 = DIRECTION('',(0.,0.,1.)); +#85789 = DIRECTION('',(1.,0.,-0.)); +#85790 = ORIENTED_EDGE('',*,*,#85791,.F.); +#85791 = EDGE_CURVE('',#85690,#85717,#85792,.T.); +#85792 = LINE('',#85793,#85794); +#85793 = CARTESIAN_POINT('',(11.9,-0.2,5.1)); +#85794 = VECTOR('',#85795,1.); +#85795 = DIRECTION('',(0.,0.,1.)); +#85796 = ORIENTED_EDGE('',*,*,#85698,.T.); +#85797 = ORIENTED_EDGE('',*,*,#84776,.T.); +#85798 = ORIENTED_EDGE('',*,*,#85799,.T.); +#85799 = EDGE_CURVE('',#84735,#84702,#85800,.T.); +#85800 = CIRCLE('',#85801,1.9); +#85801 = AXIS2_PLACEMENT_3D('',#85802,#85803,#85804); +#85802 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85803 = DIRECTION('',(0.,0.,1.)); +#85804 = DIRECTION('',(1.,0.,-0.)); +#85805 = ORIENTED_EDGE('',*,*,#84701,.T.); +#85806 = ORIENTED_EDGE('',*,*,#85807,.T.); +#85807 = EDGE_CURVE('',#84704,#84677,#85808,.T.); +#85808 = CIRCLE('',#85809,1.9); +#85809 = AXIS2_PLACEMENT_3D('',#85810,#85811,#85812); +#85810 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85811 = DIRECTION('',(0.,0.,1.)); +#85812 = DIRECTION('',(1.,0.,-0.)); +#85813 = ORIENTED_EDGE('',*,*,#84676,.T.); +#85814 = ORIENTED_EDGE('',*,*,#85689,.T.); +#85815 = ORIENTED_EDGE('',*,*,#85791,.T.); +#85816 = CYLINDRICAL_SURFACE('',#85817,1.9); +#85817 = AXIS2_PLACEMENT_3D('',#85818,#85819,#85820); +#85818 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85819 = DIRECTION('',(-0.,-0.,-1.)); +#85820 = DIRECTION('',(1.,0.,0.)); +#85821 = ADVANCED_FACE('',(#85822),#85826,.F.); +#85822 = FACE_BOUND('',#85823,.F.); +#85823 = EDGE_LOOP('',(#85824,#85825)); +#85824 = ORIENTED_EDGE('',*,*,#84742,.F.); +#85825 = ORIENTED_EDGE('',*,*,#85799,.T.); +#85826 = PLANE('',#85827); +#85827 = AXIS2_PLACEMENT_3D('',#85828,#85829,#85830); +#85828 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85829 = DIRECTION('',(0.,0.,1.)); +#85830 = DIRECTION('',(1.,0.,-0.)); +#85831 = ADVANCED_FACE('',(#85832),#85851,.F.); +#85832 = FACE_BOUND('',#85833,.F.); +#85833 = EDGE_LOOP('',(#85834,#85843,#85850)); +#85834 = ORIENTED_EDGE('',*,*,#85835,.T.); +#85835 = EDGE_CURVE('',#84811,#85836,#85838,.T.); +#85836 = VERTEX_POINT('',#85837); +#85837 = CARTESIAN_POINT('',(6.9,-0.2,5.1)); +#85838 = CIRCLE('',#85839,1.9); +#85839 = AXIS2_PLACEMENT_3D('',#85840,#85841,#85842); +#85840 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85841 = DIRECTION('',(0.,0.,1.)); +#85842 = DIRECTION('',(1.,0.,-0.)); +#85843 = ORIENTED_EDGE('',*,*,#85844,.T.); +#85844 = EDGE_CURVE('',#85836,#84819,#85845,.T.); +#85845 = CIRCLE('',#85846,1.9); +#85846 = AXIS2_PLACEMENT_3D('',#85847,#85848,#85849); +#85847 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85848 = DIRECTION('',(0.,0.,1.)); +#85849 = DIRECTION('',(1.,0.,-0.)); +#85850 = ORIENTED_EDGE('',*,*,#84818,.F.); +#85851 = PLANE('',#85852); +#85852 = AXIS2_PLACEMENT_3D('',#85853,#85854,#85855); +#85853 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85854 = DIRECTION('',(0.,0.,1.)); +#85855 = DIRECTION('',(1.,0.,-0.)); +#85856 = ADVANCED_FACE('',(#85857),#85962,.T.); +#85857 = FACE_BOUND('',#85858,.T.); +#85858 = EDGE_LOOP('',(#85859,#85870,#85878,#85887,#85895,#85904,#85912, + #85921,#85929,#85936,#85942,#85943,#85944,#85951,#85952,#85959, + #85960,#85961)); +#85859 = ORIENTED_EDGE('',*,*,#85860,.F.); +#85860 = EDGE_CURVE('',#85861,#85863,#85865,.T.); +#85861 = VERTEX_POINT('',#85862); +#85862 = CARTESIAN_POINT('',(5.35,-2.067484939698,13.6)); +#85863 = VERTEX_POINT('',#85864); +#85864 = CARTESIAN_POINT('',(6.9,-0.2,13.6)); +#85865 = CIRCLE('',#85866,1.9); +#85866 = AXIS2_PLACEMENT_3D('',#85867,#85868,#85869); +#85867 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#85868 = DIRECTION('',(0.,0.,1.)); +#85869 = DIRECTION('',(1.,0.,-0.)); +#85870 = ORIENTED_EDGE('',*,*,#85871,.T.); +#85871 = EDGE_CURVE('',#85861,#85872,#85874,.T.); +#85872 = VERTEX_POINT('',#85873); +#85873 = CARTESIAN_POINT('',(5.35,-2.067484939698,12.9)); +#85874 = LINE('',#85875,#85876); +#85875 = CARTESIAN_POINT('',(5.35,-2.067484939698,5.1)); +#85876 = VECTOR('',#85877,1.); +#85877 = DIRECTION('',(-0.,-0.,-1.)); +#85878 = ORIENTED_EDGE('',*,*,#85879,.T.); +#85879 = EDGE_CURVE('',#85872,#85880,#85882,.T.); +#85880 = VERTEX_POINT('',#85881); +#85881 = CARTESIAN_POINT('',(4.65,-2.067484939698,12.9)); +#85882 = CIRCLE('',#85883,1.9); +#85883 = AXIS2_PLACEMENT_3D('',#85884,#85885,#85886); +#85884 = CARTESIAN_POINT('',(5.,-0.2,12.9)); +#85885 = DIRECTION('',(0.,0.,-1.)); +#85886 = DIRECTION('',(1.,0.,0.)); +#85887 = ORIENTED_EDGE('',*,*,#85888,.F.); +#85888 = EDGE_CURVE('',#85889,#85880,#85891,.T.); +#85889 = VERTEX_POINT('',#85890); +#85890 = CARTESIAN_POINT('',(4.65,-2.067484939698,13.6)); +#85891 = LINE('',#85892,#85893); +#85892 = CARTESIAN_POINT('',(4.65,-2.067484939698,5.1)); +#85893 = VECTOR('',#85894,1.); +#85894 = DIRECTION('',(-0.,-0.,-1.)); +#85895 = ORIENTED_EDGE('',*,*,#85896,.F.); +#85896 = EDGE_CURVE('',#85897,#85889,#85899,.T.); +#85897 = VERTEX_POINT('',#85898); +#85898 = CARTESIAN_POINT('',(4.65,1.667484939698,13.6)); +#85899 = CIRCLE('',#85900,1.9); +#85900 = AXIS2_PLACEMENT_3D('',#85901,#85902,#85903); +#85901 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#85902 = DIRECTION('',(0.,0.,1.)); +#85903 = DIRECTION('',(1.,0.,-0.)); +#85904 = ORIENTED_EDGE('',*,*,#85905,.T.); +#85905 = EDGE_CURVE('',#85897,#85906,#85908,.T.); +#85906 = VERTEX_POINT('',#85907); +#85907 = CARTESIAN_POINT('',(4.65,1.667484939698,12.9)); +#85908 = LINE('',#85909,#85910); +#85909 = CARTESIAN_POINT('',(4.65,1.667484939698,5.1)); +#85910 = VECTOR('',#85911,1.); +#85911 = DIRECTION('',(-0.,-0.,-1.)); +#85912 = ORIENTED_EDGE('',*,*,#85913,.T.); +#85913 = EDGE_CURVE('',#85906,#85914,#85916,.T.); +#85914 = VERTEX_POINT('',#85915); +#85915 = CARTESIAN_POINT('',(5.35,1.667484939698,12.9)); +#85916 = CIRCLE('',#85917,1.9); +#85917 = AXIS2_PLACEMENT_3D('',#85918,#85919,#85920); +#85918 = CARTESIAN_POINT('',(5.,-0.2,12.9)); +#85919 = DIRECTION('',(0.,0.,-1.)); +#85920 = DIRECTION('',(1.,0.,0.)); +#85921 = ORIENTED_EDGE('',*,*,#85922,.F.); +#85922 = EDGE_CURVE('',#85923,#85914,#85925,.T.); +#85923 = VERTEX_POINT('',#85924); +#85924 = CARTESIAN_POINT('',(5.35,1.667484939698,13.6)); +#85925 = LINE('',#85926,#85927); +#85926 = CARTESIAN_POINT('',(5.35,1.667484939698,5.1)); +#85927 = VECTOR('',#85928,1.); +#85928 = DIRECTION('',(-0.,-0.,-1.)); +#85929 = ORIENTED_EDGE('',*,*,#85930,.F.); +#85930 = EDGE_CURVE('',#85863,#85923,#85931,.T.); +#85931 = CIRCLE('',#85932,1.9); +#85932 = AXIS2_PLACEMENT_3D('',#85933,#85934,#85935); +#85933 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#85934 = DIRECTION('',(0.,0.,1.)); +#85935 = DIRECTION('',(1.,0.,-0.)); +#85936 = ORIENTED_EDGE('',*,*,#85937,.F.); +#85937 = EDGE_CURVE('',#85836,#85863,#85938,.T.); +#85938 = LINE('',#85939,#85940); +#85939 = CARTESIAN_POINT('',(6.9,-0.2,5.1)); +#85940 = VECTOR('',#85941,1.); +#85941 = DIRECTION('',(0.,0.,1.)); +#85942 = ORIENTED_EDGE('',*,*,#85844,.T.); +#85943 = ORIENTED_EDGE('',*,*,#84941,.T.); +#85944 = ORIENTED_EDGE('',*,*,#85945,.T.); +#85945 = EDGE_CURVE('',#84900,#84867,#85946,.T.); +#85946 = CIRCLE('',#85947,1.9); +#85947 = AXIS2_PLACEMENT_3D('',#85948,#85949,#85950); +#85948 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85949 = DIRECTION('',(0.,0.,1.)); +#85950 = DIRECTION('',(1.,0.,-0.)); +#85951 = ORIENTED_EDGE('',*,*,#84866,.T.); +#85952 = ORIENTED_EDGE('',*,*,#85953,.T.); +#85953 = EDGE_CURVE('',#84869,#84842,#85954,.T.); +#85954 = CIRCLE('',#85955,1.9); +#85955 = AXIS2_PLACEMENT_3D('',#85956,#85957,#85958); +#85956 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85957 = DIRECTION('',(0.,0.,1.)); +#85958 = DIRECTION('',(1.,0.,-0.)); +#85959 = ORIENTED_EDGE('',*,*,#84841,.T.); +#85960 = ORIENTED_EDGE('',*,*,#85835,.T.); +#85961 = ORIENTED_EDGE('',*,*,#85937,.T.); +#85962 = CYLINDRICAL_SURFACE('',#85963,1.9); +#85963 = AXIS2_PLACEMENT_3D('',#85964,#85965,#85966); +#85964 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85965 = DIRECTION('',(-0.,-0.,-1.)); +#85966 = DIRECTION('',(1.,0.,0.)); +#85967 = ADVANCED_FACE('',(#85968),#85972,.F.); +#85968 = FACE_BOUND('',#85969,.F.); +#85969 = EDGE_LOOP('',(#85970,#85971)); +#85970 = ORIENTED_EDGE('',*,*,#84907,.F.); +#85971 = ORIENTED_EDGE('',*,*,#85945,.T.); +#85972 = PLANE('',#85973); +#85973 = AXIS2_PLACEMENT_3D('',#85974,#85975,#85976); +#85974 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85975 = DIRECTION('',(0.,0.,1.)); +#85976 = DIRECTION('',(1.,0.,-0.)); +#85977 = ADVANCED_FACE('',(#85978),#85997,.F.); +#85978 = FACE_BOUND('',#85979,.F.); +#85979 = EDGE_LOOP('',(#85980,#85989,#85996)); +#85980 = ORIENTED_EDGE('',*,*,#85981,.T.); +#85981 = EDGE_CURVE('',#84976,#85982,#85984,.T.); +#85982 = VERTEX_POINT('',#85983); +#85983 = CARTESIAN_POINT('',(1.9,-0.2,5.1)); +#85984 = CIRCLE('',#85985,1.9); +#85985 = AXIS2_PLACEMENT_3D('',#85986,#85987,#85988); +#85986 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85987 = DIRECTION('',(0.,0.,1.)); +#85988 = DIRECTION('',(1.,0.,-0.)); +#85989 = ORIENTED_EDGE('',*,*,#85990,.T.); +#85990 = EDGE_CURVE('',#85982,#84984,#85991,.T.); +#85991 = CIRCLE('',#85992,1.9); +#85992 = AXIS2_PLACEMENT_3D('',#85993,#85994,#85995); +#85993 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85994 = DIRECTION('',(0.,0.,1.)); +#85995 = DIRECTION('',(1.,0.,-0.)); +#85996 = ORIENTED_EDGE('',*,*,#84983,.F.); +#85997 = PLANE('',#85998); +#85998 = AXIS2_PLACEMENT_3D('',#85999,#86000,#86001); +#85999 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,5.1)); +#86000 = DIRECTION('',(0.,0.,1.)); +#86001 = DIRECTION('',(1.,0.,-0.)); +#86002 = ADVANCED_FACE('',(#86003),#86108,.T.); +#86003 = FACE_BOUND('',#86004,.T.); +#86004 = EDGE_LOOP('',(#86005,#86016,#86024,#86033,#86041,#86050,#86058, + #86067,#86075,#86082,#86088,#86089,#86090,#86097,#86098,#86105, + #86106,#86107)); +#86005 = ORIENTED_EDGE('',*,*,#86006,.F.); +#86006 = EDGE_CURVE('',#86007,#86009,#86011,.T.); +#86007 = VERTEX_POINT('',#86008); +#86008 = CARTESIAN_POINT('',(0.35,-2.067484939698,13.6)); +#86009 = VERTEX_POINT('',#86010); +#86010 = CARTESIAN_POINT('',(1.9,-0.2,13.6)); +#86011 = CIRCLE('',#86012,1.9); +#86012 = AXIS2_PLACEMENT_3D('',#86013,#86014,#86015); +#86013 = CARTESIAN_POINT('',(0.,-0.2,13.6)); +#86014 = DIRECTION('',(0.,0.,1.)); +#86015 = DIRECTION('',(1.,0.,-0.)); +#86016 = ORIENTED_EDGE('',*,*,#86017,.T.); +#86017 = EDGE_CURVE('',#86007,#86018,#86020,.T.); +#86018 = VERTEX_POINT('',#86019); +#86019 = CARTESIAN_POINT('',(0.35,-2.067484939698,12.9)); +#86020 = LINE('',#86021,#86022); +#86021 = CARTESIAN_POINT('',(0.35,-2.067484939698,5.1)); +#86022 = VECTOR('',#86023,1.); +#86023 = DIRECTION('',(-0.,-0.,-1.)); +#86024 = ORIENTED_EDGE('',*,*,#86025,.T.); +#86025 = EDGE_CURVE('',#86018,#86026,#86028,.T.); +#86026 = VERTEX_POINT('',#86027); +#86027 = CARTESIAN_POINT('',(-0.35,-2.067484939698,12.9)); +#86028 = CIRCLE('',#86029,1.9); +#86029 = AXIS2_PLACEMENT_3D('',#86030,#86031,#86032); +#86030 = CARTESIAN_POINT('',(0.,-0.2,12.9)); +#86031 = DIRECTION('',(0.,0.,-1.)); +#86032 = DIRECTION('',(1.,0.,0.)); +#86033 = ORIENTED_EDGE('',*,*,#86034,.F.); +#86034 = EDGE_CURVE('',#86035,#86026,#86037,.T.); +#86035 = VERTEX_POINT('',#86036); +#86036 = CARTESIAN_POINT('',(-0.35,-2.067484939698,13.6)); +#86037 = LINE('',#86038,#86039); +#86038 = CARTESIAN_POINT('',(-0.35,-2.067484939698,5.1)); +#86039 = VECTOR('',#86040,1.); +#86040 = DIRECTION('',(-0.,-0.,-1.)); +#86041 = ORIENTED_EDGE('',*,*,#86042,.F.); +#86042 = EDGE_CURVE('',#86043,#86035,#86045,.T.); +#86043 = VERTEX_POINT('',#86044); +#86044 = CARTESIAN_POINT('',(-0.35,1.667484939698,13.6)); +#86045 = CIRCLE('',#86046,1.9); +#86046 = AXIS2_PLACEMENT_3D('',#86047,#86048,#86049); +#86047 = CARTESIAN_POINT('',(0.,-0.2,13.6)); +#86048 = DIRECTION('',(0.,0.,1.)); +#86049 = DIRECTION('',(1.,0.,-0.)); +#86050 = ORIENTED_EDGE('',*,*,#86051,.T.); +#86051 = EDGE_CURVE('',#86043,#86052,#86054,.T.); +#86052 = VERTEX_POINT('',#86053); +#86053 = CARTESIAN_POINT('',(-0.35,1.667484939698,12.9)); +#86054 = LINE('',#86055,#86056); +#86055 = CARTESIAN_POINT('',(-0.35,1.667484939698,5.1)); +#86056 = VECTOR('',#86057,1.); +#86057 = DIRECTION('',(-0.,-0.,-1.)); +#86058 = ORIENTED_EDGE('',*,*,#86059,.T.); +#86059 = EDGE_CURVE('',#86052,#86060,#86062,.T.); +#86060 = VERTEX_POINT('',#86061); +#86061 = CARTESIAN_POINT('',(0.35,1.667484939698,12.9)); +#86062 = CIRCLE('',#86063,1.9); +#86063 = AXIS2_PLACEMENT_3D('',#86064,#86065,#86066); +#86064 = CARTESIAN_POINT('',(0.,-0.2,12.9)); +#86065 = DIRECTION('',(0.,0.,-1.)); +#86066 = DIRECTION('',(1.,0.,0.)); +#86067 = ORIENTED_EDGE('',*,*,#86068,.F.); +#86068 = EDGE_CURVE('',#86069,#86060,#86071,.T.); +#86069 = VERTEX_POINT('',#86070); +#86070 = CARTESIAN_POINT('',(0.35,1.667484939698,13.6)); +#86071 = LINE('',#86072,#86073); +#86072 = CARTESIAN_POINT('',(0.35,1.667484939698,5.1)); +#86073 = VECTOR('',#86074,1.); +#86074 = DIRECTION('',(-0.,-0.,-1.)); +#86075 = ORIENTED_EDGE('',*,*,#86076,.F.); +#86076 = EDGE_CURVE('',#86009,#86069,#86077,.T.); +#86077 = CIRCLE('',#86078,1.9); +#86078 = AXIS2_PLACEMENT_3D('',#86079,#86080,#86081); +#86079 = CARTESIAN_POINT('',(0.,-0.2,13.6)); +#86080 = DIRECTION('',(0.,0.,1.)); +#86081 = DIRECTION('',(1.,0.,-0.)); +#86082 = ORIENTED_EDGE('',*,*,#86083,.F.); +#86083 = EDGE_CURVE('',#85982,#86009,#86084,.T.); +#86084 = LINE('',#86085,#86086); +#86085 = CARTESIAN_POINT('',(1.9,-0.2,5.1)); +#86086 = VECTOR('',#86087,1.); +#86087 = DIRECTION('',(0.,0.,1.)); +#86088 = ORIENTED_EDGE('',*,*,#85990,.T.); +#86089 = ORIENTED_EDGE('',*,*,#85106,.T.); +#86090 = ORIENTED_EDGE('',*,*,#86091,.T.); +#86091 = EDGE_CURVE('',#85065,#85032,#86092,.T.); +#86092 = CIRCLE('',#86093,1.9); +#86093 = AXIS2_PLACEMENT_3D('',#86094,#86095,#86096); +#86094 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#86095 = DIRECTION('',(0.,0.,1.)); +#86096 = DIRECTION('',(1.,0.,-0.)); +#86097 = ORIENTED_EDGE('',*,*,#85031,.T.); +#86098 = ORIENTED_EDGE('',*,*,#86099,.T.); +#86099 = EDGE_CURVE('',#85034,#85007,#86100,.T.); +#86100 = CIRCLE('',#86101,1.9); +#86101 = AXIS2_PLACEMENT_3D('',#86102,#86103,#86104); +#86102 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#86103 = DIRECTION('',(0.,0.,1.)); +#86104 = DIRECTION('',(1.,0.,-0.)); +#86105 = ORIENTED_EDGE('',*,*,#85006,.T.); +#86106 = ORIENTED_EDGE('',*,*,#85981,.T.); +#86107 = ORIENTED_EDGE('',*,*,#86083,.T.); +#86108 = CYLINDRICAL_SURFACE('',#86109,1.9); +#86109 = AXIS2_PLACEMENT_3D('',#86110,#86111,#86112); +#86110 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#86111 = DIRECTION('',(-0.,-0.,-1.)); +#86112 = DIRECTION('',(1.,0.,0.)); +#86113 = ADVANCED_FACE('',(#86114),#86118,.F.); +#86114 = FACE_BOUND('',#86115,.F.); +#86115 = EDGE_LOOP('',(#86116,#86117)); +#86116 = ORIENTED_EDGE('',*,*,#85072,.F.); +#86117 = ORIENTED_EDGE('',*,*,#86091,.T.); +#86118 = PLANE('',#86119); +#86119 = AXIS2_PLACEMENT_3D('',#86120,#86121,#86122); +#86120 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,5.1)); +#86121 = DIRECTION('',(0.,0.,1.)); +#86122 = DIRECTION('',(1.,0.,-0.)); +#86123 = ADVANCED_FACE('',(#86124),#86128,.F.); +#86124 = FACE_BOUND('',#86125,.F.); +#86125 = EDGE_LOOP('',(#86126,#86127)); +#86126 = ORIENTED_EDGE('',*,*,#85515,.T.); +#86127 = ORIENTED_EDGE('',*,*,#85125,.F.); +#86128 = PLANE('',#86129); +#86129 = AXIS2_PLACEMENT_3D('',#86130,#86131,#86132); +#86130 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#86131 = DIRECTION('',(0.,0.,1.)); +#86132 = DIRECTION('',(1.,0.,-0.)); +#86133 = ADVANCED_FACE('',(#86134),#86159,.T.); +#86134 = FACE_BOUND('',#86135,.T.); +#86135 = EDGE_LOOP('',(#86136,#86144,#86145,#86153)); +#86136 = ORIENTED_EDGE('',*,*,#86137,.T.); +#86137 = EDGE_CURVE('',#86138,#85138,#86140,.T.); +#86138 = VERTEX_POINT('',#86139); +#86139 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86140 = LINE('',#86141,#86142); +#86141 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86142 = VECTOR('',#86143,1.); +#86143 = DIRECTION('',(0.,-1.,0.)); +#86144 = ORIENTED_EDGE('',*,*,#85137,.T.); +#86145 = ORIENTED_EDGE('',*,*,#86146,.F.); +#86146 = EDGE_CURVE('',#86147,#85140,#86149,.T.); +#86147 = VERTEX_POINT('',#86148); +#86148 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86149 = LINE('',#86150,#86151); +#86150 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86151 = VECTOR('',#86152,1.); +#86152 = DIRECTION('',(0.,-1.,0.)); +#86153 = ORIENTED_EDGE('',*,*,#86154,.F.); +#86154 = EDGE_CURVE('',#86138,#86147,#86155,.T.); +#86155 = LINE('',#86156,#86157); +#86156 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86157 = VECTOR('',#86158,1.); +#86158 = DIRECTION('',(0.,0.,-1.)); +#86159 = PLANE('',#86160); +#86160 = AXIS2_PLACEMENT_3D('',#86161,#86162,#86163); +#86161 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86162 = DIRECTION('',(1.,0.,0.)); +#86163 = DIRECTION('',(0.,0.,-1.)); +#86164 = ADVANCED_FACE('',(#86165),#86183,.T.); +#86165 = FACE_BOUND('',#86166,.T.); +#86166 = EDGE_LOOP('',(#86167,#86175,#86176,#86177)); +#86167 = ORIENTED_EDGE('',*,*,#86168,.T.); +#86168 = EDGE_CURVE('',#86169,#85156,#86171,.T.); +#86169 = VERTEX_POINT('',#86170); +#86170 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86171 = LINE('',#86172,#86173); +#86172 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86173 = VECTOR('',#86174,1.); +#86174 = DIRECTION('',(0.,-1.,0.)); +#86175 = ORIENTED_EDGE('',*,*,#85163,.T.); +#86176 = ORIENTED_EDGE('',*,*,#86137,.F.); +#86177 = ORIENTED_EDGE('',*,*,#86178,.F.); +#86178 = EDGE_CURVE('',#86169,#86138,#86179,.T.); +#86179 = LINE('',#86180,#86181); +#86180 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86181 = VECTOR('',#86182,1.); +#86182 = DIRECTION('',(-1.,0.,0.)); +#86183 = PLANE('',#86184); +#86184 = AXIS2_PLACEMENT_3D('',#86185,#86186,#86187); +#86185 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86186 = DIRECTION('',(-0.,-0.,-1.)); +#86187 = DIRECTION('',(-1.,0.,0.)); +#86188 = ADVANCED_FACE('',(#86189),#86207,.T.); +#86189 = FACE_BOUND('',#86190,.T.); +#86190 = EDGE_LOOP('',(#86191,#86199,#86200,#86201)); +#86191 = ORIENTED_EDGE('',*,*,#86192,.T.); +#86192 = EDGE_CURVE('',#86193,#85148,#86195,.T.); +#86193 = VERTEX_POINT('',#86194); +#86194 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86195 = LINE('',#86196,#86197); +#86196 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86197 = VECTOR('',#86198,1.); +#86198 = DIRECTION('',(0.,-1.,0.)); +#86199 = ORIENTED_EDGE('',*,*,#85155,.T.); +#86200 = ORIENTED_EDGE('',*,*,#86168,.F.); +#86201 = ORIENTED_EDGE('',*,*,#86202,.F.); +#86202 = EDGE_CURVE('',#86193,#86169,#86203,.T.); +#86203 = LINE('',#86204,#86205); +#86204 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86205 = VECTOR('',#86206,1.); +#86206 = DIRECTION('',(0.,0.,1.)); +#86207 = PLANE('',#86208); +#86208 = AXIS2_PLACEMENT_3D('',#86209,#86210,#86211); +#86209 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86210 = DIRECTION('',(-1.,0.,0.)); +#86211 = DIRECTION('',(0.,0.,1.)); +#86212 = ADVANCED_FACE('',(#86213),#86224,.T.); +#86213 = FACE_BOUND('',#86214,.T.); +#86214 = EDGE_LOOP('',(#86215,#86216,#86217,#86218)); +#86215 = ORIENTED_EDGE('',*,*,#86146,.T.); +#86216 = ORIENTED_EDGE('',*,*,#85147,.T.); +#86217 = ORIENTED_EDGE('',*,*,#86192,.F.); +#86218 = ORIENTED_EDGE('',*,*,#86219,.F.); +#86219 = EDGE_CURVE('',#86147,#86193,#86220,.T.); +#86220 = LINE('',#86221,#86222); +#86221 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86222 = VECTOR('',#86223,1.); +#86223 = DIRECTION('',(1.,0.,0.)); +#86224 = PLANE('',#86225); +#86225 = AXIS2_PLACEMENT_3D('',#86226,#86227,#86228); +#86226 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86227 = DIRECTION('',(-0.,0.,1.)); +#86228 = DIRECTION('',(1.,0.,0.)); +#86229 = ADVANCED_FACE('',(#86230),#86234,.F.); +#86230 = FACE_BOUND('',#86231,.F.); +#86231 = EDGE_LOOP('',(#86232,#86233)); +#86232 = ORIENTED_EDGE('',*,*,#85661,.T.); +#86233 = ORIENTED_EDGE('',*,*,#85180,.F.); +#86234 = PLANE('',#86235); +#86235 = AXIS2_PLACEMENT_3D('',#86236,#86237,#86238); +#86236 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#86237 = DIRECTION('',(0.,0.,1.)); +#86238 = DIRECTION('',(1.,0.,-0.)); +#86239 = ADVANCED_FACE('',(#86240),#86265,.T.); +#86240 = FACE_BOUND('',#86241,.T.); +#86241 = EDGE_LOOP('',(#86242,#86250,#86251,#86259)); +#86242 = ORIENTED_EDGE('',*,*,#86243,.T.); +#86243 = EDGE_CURVE('',#86244,#85193,#86246,.T.); +#86244 = VERTEX_POINT('',#86245); +#86245 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86246 = LINE('',#86247,#86248); +#86247 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86248 = VECTOR('',#86249,1.); +#86249 = DIRECTION('',(0.,-1.,0.)); +#86250 = ORIENTED_EDGE('',*,*,#85192,.T.); +#86251 = ORIENTED_EDGE('',*,*,#86252,.F.); +#86252 = EDGE_CURVE('',#86253,#85195,#86255,.T.); +#86253 = VERTEX_POINT('',#86254); +#86254 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86255 = LINE('',#86256,#86257); +#86256 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86257 = VECTOR('',#86258,1.); +#86258 = DIRECTION('',(0.,-1.,0.)); +#86259 = ORIENTED_EDGE('',*,*,#86260,.F.); +#86260 = EDGE_CURVE('',#86244,#86253,#86261,.T.); +#86261 = LINE('',#86262,#86263); +#86262 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86263 = VECTOR('',#86264,1.); +#86264 = DIRECTION('',(0.,0.,-1.)); +#86265 = PLANE('',#86266); +#86266 = AXIS2_PLACEMENT_3D('',#86267,#86268,#86269); +#86267 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86268 = DIRECTION('',(1.,0.,0.)); +#86269 = DIRECTION('',(0.,0.,-1.)); +#86270 = ADVANCED_FACE('',(#86271),#86289,.T.); +#86271 = FACE_BOUND('',#86272,.T.); +#86272 = EDGE_LOOP('',(#86273,#86281,#86282,#86283)); +#86273 = ORIENTED_EDGE('',*,*,#86274,.T.); +#86274 = EDGE_CURVE('',#86275,#85211,#86277,.T.); +#86275 = VERTEX_POINT('',#86276); +#86276 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86277 = LINE('',#86278,#86279); +#86278 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86279 = VECTOR('',#86280,1.); +#86280 = DIRECTION('',(0.,-1.,0.)); +#86281 = ORIENTED_EDGE('',*,*,#85218,.T.); +#86282 = ORIENTED_EDGE('',*,*,#86243,.F.); +#86283 = ORIENTED_EDGE('',*,*,#86284,.F.); +#86284 = EDGE_CURVE('',#86275,#86244,#86285,.T.); +#86285 = LINE('',#86286,#86287); +#86286 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86287 = VECTOR('',#86288,1.); +#86288 = DIRECTION('',(-1.,0.,0.)); +#86289 = PLANE('',#86290); +#86290 = AXIS2_PLACEMENT_3D('',#86291,#86292,#86293); +#86291 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86292 = DIRECTION('',(-0.,-0.,-1.)); +#86293 = DIRECTION('',(-1.,0.,0.)); +#86294 = ADVANCED_FACE('',(#86295),#86313,.T.); +#86295 = FACE_BOUND('',#86296,.T.); +#86296 = EDGE_LOOP('',(#86297,#86305,#86306,#86307)); +#86297 = ORIENTED_EDGE('',*,*,#86298,.T.); +#86298 = EDGE_CURVE('',#86299,#85203,#86301,.T.); +#86299 = VERTEX_POINT('',#86300); +#86300 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86301 = LINE('',#86302,#86303); +#86302 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86303 = VECTOR('',#86304,1.); +#86304 = DIRECTION('',(0.,-1.,0.)); +#86305 = ORIENTED_EDGE('',*,*,#85210,.T.); +#86306 = ORIENTED_EDGE('',*,*,#86274,.F.); +#86307 = ORIENTED_EDGE('',*,*,#86308,.F.); +#86308 = EDGE_CURVE('',#86299,#86275,#86309,.T.); +#86309 = LINE('',#86310,#86311); +#86310 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86311 = VECTOR('',#86312,1.); +#86312 = DIRECTION('',(0.,0.,1.)); +#86313 = PLANE('',#86314); +#86314 = AXIS2_PLACEMENT_3D('',#86315,#86316,#86317); +#86315 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86316 = DIRECTION('',(-1.,0.,0.)); +#86317 = DIRECTION('',(0.,0.,1.)); +#86318 = ADVANCED_FACE('',(#86319),#86330,.T.); +#86319 = FACE_BOUND('',#86320,.T.); +#86320 = EDGE_LOOP('',(#86321,#86322,#86323,#86324)); +#86321 = ORIENTED_EDGE('',*,*,#86252,.T.); +#86322 = ORIENTED_EDGE('',*,*,#85202,.T.); +#86323 = ORIENTED_EDGE('',*,*,#86298,.F.); +#86324 = ORIENTED_EDGE('',*,*,#86325,.F.); +#86325 = EDGE_CURVE('',#86253,#86299,#86326,.T.); +#86326 = LINE('',#86327,#86328); +#86327 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86328 = VECTOR('',#86329,1.); +#86329 = DIRECTION('',(1.,0.,0.)); +#86330 = PLANE('',#86331); +#86331 = AXIS2_PLACEMENT_3D('',#86332,#86333,#86334); +#86332 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86333 = DIRECTION('',(-0.,0.,1.)); +#86334 = DIRECTION('',(1.,0.,0.)); +#86335 = ADVANCED_FACE('',(#86336),#86340,.F.); +#86336 = FACE_BOUND('',#86337,.F.); +#86337 = EDGE_LOOP('',(#86338,#86339)); +#86338 = ORIENTED_EDGE('',*,*,#85807,.T.); +#86339 = ORIENTED_EDGE('',*,*,#85235,.F.); +#86340 = PLANE('',#86341); +#86341 = AXIS2_PLACEMENT_3D('',#86342,#86343,#86344); +#86342 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#86343 = DIRECTION('',(0.,0.,1.)); +#86344 = DIRECTION('',(1.,0.,-0.)); +#86345 = ADVANCED_FACE('',(#86346),#86371,.T.); +#86346 = FACE_BOUND('',#86347,.T.); +#86347 = EDGE_LOOP('',(#86348,#86356,#86357,#86365)); +#86348 = ORIENTED_EDGE('',*,*,#86349,.T.); +#86349 = EDGE_CURVE('',#86350,#85248,#86352,.T.); +#86350 = VERTEX_POINT('',#86351); +#86351 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86352 = LINE('',#86353,#86354); +#86353 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86354 = VECTOR('',#86355,1.); +#86355 = DIRECTION('',(0.,-1.,0.)); +#86356 = ORIENTED_EDGE('',*,*,#85247,.T.); +#86357 = ORIENTED_EDGE('',*,*,#86358,.F.); +#86358 = EDGE_CURVE('',#86359,#85250,#86361,.T.); +#86359 = VERTEX_POINT('',#86360); +#86360 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86361 = LINE('',#86362,#86363); +#86362 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86363 = VECTOR('',#86364,1.); +#86364 = DIRECTION('',(0.,-1.,0.)); +#86365 = ORIENTED_EDGE('',*,*,#86366,.F.); +#86366 = EDGE_CURVE('',#86350,#86359,#86367,.T.); +#86367 = LINE('',#86368,#86369); +#86368 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86369 = VECTOR('',#86370,1.); +#86370 = DIRECTION('',(0.,0.,-1.)); +#86371 = PLANE('',#86372); +#86372 = AXIS2_PLACEMENT_3D('',#86373,#86374,#86375); +#86373 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86374 = DIRECTION('',(1.,0.,0.)); +#86375 = DIRECTION('',(0.,0.,-1.)); +#86376 = ADVANCED_FACE('',(#86377),#86395,.T.); +#86377 = FACE_BOUND('',#86378,.T.); +#86378 = EDGE_LOOP('',(#86379,#86387,#86388,#86389)); +#86379 = ORIENTED_EDGE('',*,*,#86380,.T.); +#86380 = EDGE_CURVE('',#86381,#85266,#86383,.T.); +#86381 = VERTEX_POINT('',#86382); +#86382 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86383 = LINE('',#86384,#86385); +#86384 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86385 = VECTOR('',#86386,1.); +#86386 = DIRECTION('',(0.,-1.,0.)); +#86387 = ORIENTED_EDGE('',*,*,#85273,.T.); +#86388 = ORIENTED_EDGE('',*,*,#86349,.F.); +#86389 = ORIENTED_EDGE('',*,*,#86390,.F.); +#86390 = EDGE_CURVE('',#86381,#86350,#86391,.T.); +#86391 = LINE('',#86392,#86393); +#86392 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86393 = VECTOR('',#86394,1.); +#86394 = DIRECTION('',(-1.,0.,0.)); +#86395 = PLANE('',#86396); +#86396 = AXIS2_PLACEMENT_3D('',#86397,#86398,#86399); +#86397 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86398 = DIRECTION('',(-0.,-0.,-1.)); +#86399 = DIRECTION('',(-1.,0.,0.)); +#86400 = ADVANCED_FACE('',(#86401),#86419,.T.); +#86401 = FACE_BOUND('',#86402,.T.); +#86402 = EDGE_LOOP('',(#86403,#86411,#86412,#86413)); +#86403 = ORIENTED_EDGE('',*,*,#86404,.T.); +#86404 = EDGE_CURVE('',#86405,#85258,#86407,.T.); +#86405 = VERTEX_POINT('',#86406); +#86406 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86407 = LINE('',#86408,#86409); +#86408 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86409 = VECTOR('',#86410,1.); +#86410 = DIRECTION('',(0.,-1.,0.)); +#86411 = ORIENTED_EDGE('',*,*,#85265,.T.); +#86412 = ORIENTED_EDGE('',*,*,#86380,.F.); +#86413 = ORIENTED_EDGE('',*,*,#86414,.F.); +#86414 = EDGE_CURVE('',#86405,#86381,#86415,.T.); +#86415 = LINE('',#86416,#86417); +#86416 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86417 = VECTOR('',#86418,1.); +#86418 = DIRECTION('',(0.,0.,1.)); +#86419 = PLANE('',#86420); +#86420 = AXIS2_PLACEMENT_3D('',#86421,#86422,#86423); +#86421 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86422 = DIRECTION('',(-1.,0.,0.)); +#86423 = DIRECTION('',(0.,0.,1.)); +#86424 = ADVANCED_FACE('',(#86425),#86436,.T.); +#86425 = FACE_BOUND('',#86426,.T.); +#86426 = EDGE_LOOP('',(#86427,#86428,#86429,#86430)); +#86427 = ORIENTED_EDGE('',*,*,#86358,.T.); +#86428 = ORIENTED_EDGE('',*,*,#85257,.T.); +#86429 = ORIENTED_EDGE('',*,*,#86404,.F.); +#86430 = ORIENTED_EDGE('',*,*,#86431,.F.); +#86431 = EDGE_CURVE('',#86359,#86405,#86432,.T.); +#86432 = LINE('',#86433,#86434); +#86433 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86434 = VECTOR('',#86435,1.); +#86435 = DIRECTION('',(1.,0.,0.)); +#86436 = PLANE('',#86437); +#86437 = AXIS2_PLACEMENT_3D('',#86438,#86439,#86440); +#86438 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86439 = DIRECTION('',(-0.,0.,1.)); +#86440 = DIRECTION('',(1.,0.,0.)); +#86441 = ADVANCED_FACE('',(#86442),#86446,.F.); +#86442 = FACE_BOUND('',#86443,.F.); +#86443 = EDGE_LOOP('',(#86444,#86445)); +#86444 = ORIENTED_EDGE('',*,*,#85953,.T.); +#86445 = ORIENTED_EDGE('',*,*,#85290,.F.); +#86446 = PLANE('',#86447); +#86447 = AXIS2_PLACEMENT_3D('',#86448,#86449,#86450); +#86448 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#86449 = DIRECTION('',(0.,0.,1.)); +#86450 = DIRECTION('',(1.,0.,-0.)); +#86451 = ADVANCED_FACE('',(#86452),#86477,.T.); +#86452 = FACE_BOUND('',#86453,.T.); +#86453 = EDGE_LOOP('',(#86454,#86462,#86463,#86471)); +#86454 = ORIENTED_EDGE('',*,*,#86455,.T.); +#86455 = EDGE_CURVE('',#86456,#85303,#86458,.T.); +#86456 = VERTEX_POINT('',#86457); +#86457 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86458 = LINE('',#86459,#86460); +#86459 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86460 = VECTOR('',#86461,1.); +#86461 = DIRECTION('',(0.,-1.,0.)); +#86462 = ORIENTED_EDGE('',*,*,#85302,.T.); +#86463 = ORIENTED_EDGE('',*,*,#86464,.F.); +#86464 = EDGE_CURVE('',#86465,#85305,#86467,.T.); +#86465 = VERTEX_POINT('',#86466); +#86466 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86467 = LINE('',#86468,#86469); +#86468 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86469 = VECTOR('',#86470,1.); +#86470 = DIRECTION('',(0.,-1.,0.)); +#86471 = ORIENTED_EDGE('',*,*,#86472,.F.); +#86472 = EDGE_CURVE('',#86456,#86465,#86473,.T.); +#86473 = LINE('',#86474,#86475); +#86474 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86475 = VECTOR('',#86476,1.); +#86476 = DIRECTION('',(0.,0.,-1.)); +#86477 = PLANE('',#86478); +#86478 = AXIS2_PLACEMENT_3D('',#86479,#86480,#86481); +#86479 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86480 = DIRECTION('',(1.,0.,0.)); +#86481 = DIRECTION('',(0.,0.,-1.)); +#86482 = ADVANCED_FACE('',(#86483),#86501,.T.); +#86483 = FACE_BOUND('',#86484,.T.); +#86484 = EDGE_LOOP('',(#86485,#86493,#86494,#86495)); +#86485 = ORIENTED_EDGE('',*,*,#86486,.T.); +#86486 = EDGE_CURVE('',#86487,#85321,#86489,.T.); +#86487 = VERTEX_POINT('',#86488); +#86488 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86489 = LINE('',#86490,#86491); +#86490 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86491 = VECTOR('',#86492,1.); +#86492 = DIRECTION('',(0.,-1.,0.)); +#86493 = ORIENTED_EDGE('',*,*,#85328,.T.); +#86494 = ORIENTED_EDGE('',*,*,#86455,.F.); +#86495 = ORIENTED_EDGE('',*,*,#86496,.F.); +#86496 = EDGE_CURVE('',#86487,#86456,#86497,.T.); +#86497 = LINE('',#86498,#86499); +#86498 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86499 = VECTOR('',#86500,1.); +#86500 = DIRECTION('',(-1.,0.,0.)); +#86501 = PLANE('',#86502); +#86502 = AXIS2_PLACEMENT_3D('',#86503,#86504,#86505); +#86503 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86504 = DIRECTION('',(-0.,-0.,-1.)); +#86505 = DIRECTION('',(-1.,0.,0.)); +#86506 = ADVANCED_FACE('',(#86507),#86525,.T.); +#86507 = FACE_BOUND('',#86508,.T.); +#86508 = EDGE_LOOP('',(#86509,#86517,#86518,#86519)); +#86509 = ORIENTED_EDGE('',*,*,#86510,.T.); +#86510 = EDGE_CURVE('',#86511,#85313,#86513,.T.); +#86511 = VERTEX_POINT('',#86512); +#86512 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86513 = LINE('',#86514,#86515); +#86514 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86515 = VECTOR('',#86516,1.); +#86516 = DIRECTION('',(0.,-1.,0.)); +#86517 = ORIENTED_EDGE('',*,*,#85320,.T.); +#86518 = ORIENTED_EDGE('',*,*,#86486,.F.); +#86519 = ORIENTED_EDGE('',*,*,#86520,.F.); +#86520 = EDGE_CURVE('',#86511,#86487,#86521,.T.); +#86521 = LINE('',#86522,#86523); +#86522 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86523 = VECTOR('',#86524,1.); +#86524 = DIRECTION('',(0.,0.,1.)); +#86525 = PLANE('',#86526); +#86526 = AXIS2_PLACEMENT_3D('',#86527,#86528,#86529); +#86527 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86528 = DIRECTION('',(-1.,0.,0.)); +#86529 = DIRECTION('',(0.,0.,1.)); +#86530 = ADVANCED_FACE('',(#86531),#86542,.T.); +#86531 = FACE_BOUND('',#86532,.T.); +#86532 = EDGE_LOOP('',(#86533,#86534,#86535,#86536)); +#86533 = ORIENTED_EDGE('',*,*,#86464,.T.); +#86534 = ORIENTED_EDGE('',*,*,#85312,.T.); +#86535 = ORIENTED_EDGE('',*,*,#86510,.F.); +#86536 = ORIENTED_EDGE('',*,*,#86537,.F.); +#86537 = EDGE_CURVE('',#86465,#86511,#86538,.T.); +#86538 = LINE('',#86539,#86540); +#86539 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86540 = VECTOR('',#86541,1.); +#86541 = DIRECTION('',(1.,0.,0.)); +#86542 = PLANE('',#86543); +#86543 = AXIS2_PLACEMENT_3D('',#86544,#86545,#86546); +#86544 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86545 = DIRECTION('',(-0.,0.,1.)); +#86546 = DIRECTION('',(1.,0.,0.)); +#86547 = ADVANCED_FACE('',(#86548),#86552,.F.); +#86548 = FACE_BOUND('',#86549,.F.); +#86549 = EDGE_LOOP('',(#86550,#86551)); +#86550 = ORIENTED_EDGE('',*,*,#86099,.T.); +#86551 = ORIENTED_EDGE('',*,*,#85345,.F.); +#86552 = PLANE('',#86553); +#86553 = AXIS2_PLACEMENT_3D('',#86554,#86555,#86556); +#86554 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,5.1)); +#86555 = DIRECTION('',(0.,0.,1.)); +#86556 = DIRECTION('',(1.,0.,-0.)); +#86557 = ADVANCED_FACE('',(#86558),#86583,.T.); +#86558 = FACE_BOUND('',#86559,.T.); +#86559 = EDGE_LOOP('',(#86560,#86568,#86569,#86577)); +#86560 = ORIENTED_EDGE('',*,*,#86561,.T.); +#86561 = EDGE_CURVE('',#86562,#85358,#86564,.T.); +#86562 = VERTEX_POINT('',#86563); +#86563 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86564 = LINE('',#86565,#86566); +#86565 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86566 = VECTOR('',#86567,1.); +#86567 = DIRECTION('',(0.,-1.,0.)); +#86568 = ORIENTED_EDGE('',*,*,#85357,.T.); +#86569 = ORIENTED_EDGE('',*,*,#86570,.F.); +#86570 = EDGE_CURVE('',#86571,#85360,#86573,.T.); +#86571 = VERTEX_POINT('',#86572); +#86572 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86573 = LINE('',#86574,#86575); +#86574 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86575 = VECTOR('',#86576,1.); +#86576 = DIRECTION('',(0.,-1.,0.)); +#86577 = ORIENTED_EDGE('',*,*,#86578,.F.); +#86578 = EDGE_CURVE('',#86562,#86571,#86579,.T.); +#86579 = LINE('',#86580,#86581); +#86580 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86581 = VECTOR('',#86582,1.); +#86582 = DIRECTION('',(0.,0.,-1.)); +#86583 = PLANE('',#86584); +#86584 = AXIS2_PLACEMENT_3D('',#86585,#86586,#86587); +#86585 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86586 = DIRECTION('',(1.,0.,0.)); +#86587 = DIRECTION('',(0.,0.,-1.)); +#86588 = ADVANCED_FACE('',(#86589),#86607,.T.); +#86589 = FACE_BOUND('',#86590,.T.); +#86590 = EDGE_LOOP('',(#86591,#86599,#86600,#86601)); +#86591 = ORIENTED_EDGE('',*,*,#86592,.T.); +#86592 = EDGE_CURVE('',#86593,#85376,#86595,.T.); +#86593 = VERTEX_POINT('',#86594); +#86594 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86595 = LINE('',#86596,#86597); +#86596 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86597 = VECTOR('',#86598,1.); +#86598 = DIRECTION('',(0.,-1.,0.)); +#86599 = ORIENTED_EDGE('',*,*,#85383,.T.); +#86600 = ORIENTED_EDGE('',*,*,#86561,.F.); +#86601 = ORIENTED_EDGE('',*,*,#86602,.F.); +#86602 = EDGE_CURVE('',#86593,#86562,#86603,.T.); +#86603 = LINE('',#86604,#86605); +#86604 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86605 = VECTOR('',#86606,1.); +#86606 = DIRECTION('',(-1.,0.,0.)); +#86607 = PLANE('',#86608); +#86608 = AXIS2_PLACEMENT_3D('',#86609,#86610,#86611); +#86609 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86610 = DIRECTION('',(-0.,-0.,-1.)); +#86611 = DIRECTION('',(-1.,0.,0.)); +#86612 = ADVANCED_FACE('',(#86613),#86631,.T.); +#86613 = FACE_BOUND('',#86614,.T.); +#86614 = EDGE_LOOP('',(#86615,#86623,#86624,#86625)); +#86615 = ORIENTED_EDGE('',*,*,#86616,.T.); +#86616 = EDGE_CURVE('',#86617,#85368,#86619,.T.); +#86617 = VERTEX_POINT('',#86618); +#86618 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86619 = LINE('',#86620,#86621); +#86620 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86621 = VECTOR('',#86622,1.); +#86622 = DIRECTION('',(0.,-1.,0.)); +#86623 = ORIENTED_EDGE('',*,*,#85375,.T.); +#86624 = ORIENTED_EDGE('',*,*,#86592,.F.); +#86625 = ORIENTED_EDGE('',*,*,#86626,.F.); +#86626 = EDGE_CURVE('',#86617,#86593,#86627,.T.); +#86627 = LINE('',#86628,#86629); +#86628 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86629 = VECTOR('',#86630,1.); +#86630 = DIRECTION('',(0.,0.,1.)); +#86631 = PLANE('',#86632); +#86632 = AXIS2_PLACEMENT_3D('',#86633,#86634,#86635); +#86633 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86634 = DIRECTION('',(-1.,0.,0.)); +#86635 = DIRECTION('',(0.,0.,1.)); +#86636 = ADVANCED_FACE('',(#86637),#86648,.T.); +#86637 = FACE_BOUND('',#86638,.T.); +#86638 = EDGE_LOOP('',(#86639,#86640,#86641,#86642)); +#86639 = ORIENTED_EDGE('',*,*,#86570,.T.); +#86640 = ORIENTED_EDGE('',*,*,#85367,.T.); +#86641 = ORIENTED_EDGE('',*,*,#86616,.F.); +#86642 = ORIENTED_EDGE('',*,*,#86643,.F.); +#86643 = EDGE_CURVE('',#86571,#86617,#86644,.T.); +#86644 = LINE('',#86645,#86646); +#86645 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86646 = VECTOR('',#86647,1.); +#86647 = DIRECTION('',(1.,0.,0.)); +#86648 = PLANE('',#86649); +#86649 = AXIS2_PLACEMENT_3D('',#86650,#86651,#86652); +#86650 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86651 = DIRECTION('',(-0.,0.,1.)); +#86652 = DIRECTION('',(1.,0.,0.)); +#86653 = ADVANCED_FACE('',(#86654),#86664,.T.); +#86654 = FACE_BOUND('',#86655,.T.); +#86655 = EDGE_LOOP('',(#86656,#86657,#86658)); +#86656 = ORIENTED_EDGE('',*,*,#85422,.T.); +#86657 = ORIENTED_EDGE('',*,*,#85492,.T.); +#86658 = ORIENTED_EDGE('',*,*,#86659,.F.); +#86659 = EDGE_CURVE('',#85423,#85485,#86660,.T.); +#86660 = LINE('',#86661,#86662); +#86661 = CARTESIAN_POINT('',(20.35,-2.2,13.6)); +#86662 = VECTOR('',#86663,1.); +#86663 = DIRECTION('',(0.,1.,0.)); +#86664 = PLANE('',#86665); +#86665 = AXIS2_PLACEMENT_3D('',#86666,#86667,#86668); +#86666 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#86667 = DIRECTION('',(0.,0.,1.)); +#86668 = DIRECTION('',(1.,0.,-0.)); +#86669 = ADVANCED_FACE('',(#86670),#86681,.F.); +#86670 = FACE_BOUND('',#86671,.F.); +#86671 = EDGE_LOOP('',(#86672,#86673,#86674,#86680)); +#86672 = ORIENTED_EDGE('',*,*,#86659,.F.); +#86673 = ORIENTED_EDGE('',*,*,#85433,.T.); +#86674 = ORIENTED_EDGE('',*,*,#86675,.T.); +#86675 = EDGE_CURVE('',#85434,#85476,#86676,.T.); +#86676 = LINE('',#86677,#86678); +#86677 = CARTESIAN_POINT('',(20.35,-2.2,12.9)); +#86678 = VECTOR('',#86679,1.); +#86679 = DIRECTION('',(0.,1.,0.)); +#86680 = ORIENTED_EDGE('',*,*,#85484,.F.); +#86681 = PLANE('',#86682); +#86682 = AXIS2_PLACEMENT_3D('',#86683,#86684,#86685); +#86683 = CARTESIAN_POINT('',(20.35,-2.2,13.6)); +#86684 = DIRECTION('',(1.,0.,0.)); +#86685 = DIRECTION('',(-0.,1.,0.)); +#86686 = ADVANCED_FACE('',(#86687),#86698,.T.); +#86687 = FACE_BOUND('',#86688,.T.); +#86688 = EDGE_LOOP('',(#86689,#86695,#86696,#86697)); +#86689 = ORIENTED_EDGE('',*,*,#86690,.T.); +#86690 = EDGE_CURVE('',#85468,#85442,#86691,.T.); +#86691 = LINE('',#86692,#86693); +#86692 = CARTESIAN_POINT('',(19.65,1.8,12.9)); +#86693 = VECTOR('',#86694,1.); +#86694 = DIRECTION('',(0.,-1.,0.)); +#86695 = ORIENTED_EDGE('',*,*,#85441,.F.); +#86696 = ORIENTED_EDGE('',*,*,#86675,.T.); +#86697 = ORIENTED_EDGE('',*,*,#85475,.F.); +#86698 = PLANE('',#86699); +#86699 = AXIS2_PLACEMENT_3D('',#86700,#86701,#86702); +#86700 = CARTESIAN_POINT('',(20.,-0.2,12.9)); +#86701 = DIRECTION('',(0.,0.,1.)); +#86702 = DIRECTION('',(1.,0.,-0.)); +#86703 = ADVANCED_FACE('',(#86704),#86715,.F.); +#86704 = FACE_BOUND('',#86705,.F.); +#86705 = EDGE_LOOP('',(#86706,#86712,#86713,#86714)); +#86706 = ORIENTED_EDGE('',*,*,#86707,.F.); +#86707 = EDGE_CURVE('',#85459,#85451,#86708,.T.); +#86708 = LINE('',#86709,#86710); +#86709 = CARTESIAN_POINT('',(19.65,1.8,13.6)); +#86710 = VECTOR('',#86711,1.); +#86711 = DIRECTION('',(0.,-1.,0.)); +#86712 = ORIENTED_EDGE('',*,*,#85467,.T.); +#86713 = ORIENTED_EDGE('',*,*,#86690,.T.); +#86714 = ORIENTED_EDGE('',*,*,#85450,.F.); +#86715 = PLANE('',#86716); +#86716 = AXIS2_PLACEMENT_3D('',#86717,#86718,#86719); +#86717 = CARTESIAN_POINT('',(19.65,1.8,13.6)); +#86718 = DIRECTION('',(-1.,0.,0.)); +#86719 = DIRECTION('',(0.,-1.,0.)); +#86720 = ADVANCED_FACE('',(#86721),#86725,.T.); +#86721 = FACE_BOUND('',#86722,.T.); +#86722 = EDGE_LOOP('',(#86723,#86724)); +#86723 = ORIENTED_EDGE('',*,*,#86707,.F.); +#86724 = ORIENTED_EDGE('',*,*,#85458,.T.); +#86725 = PLANE('',#86726); +#86726 = AXIS2_PLACEMENT_3D('',#86727,#86728,#86729); +#86727 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#86728 = DIRECTION('',(0.,0.,1.)); +#86729 = DIRECTION('',(1.,0.,-0.)); +#86730 = ADVANCED_FACE('',(#86731),#86741,.T.); +#86731 = FACE_BOUND('',#86732,.T.); +#86732 = EDGE_LOOP('',(#86733,#86734,#86735)); +#86733 = ORIENTED_EDGE('',*,*,#85568,.T.); +#86734 = ORIENTED_EDGE('',*,*,#85638,.T.); +#86735 = ORIENTED_EDGE('',*,*,#86736,.F.); +#86736 = EDGE_CURVE('',#85569,#85631,#86737,.T.); +#86737 = LINE('',#86738,#86739); +#86738 = CARTESIAN_POINT('',(15.35,-2.2,13.6)); +#86739 = VECTOR('',#86740,1.); +#86740 = DIRECTION('',(0.,1.,0.)); +#86741 = PLANE('',#86742); +#86742 = AXIS2_PLACEMENT_3D('',#86743,#86744,#86745); +#86743 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#86744 = DIRECTION('',(0.,0.,1.)); +#86745 = DIRECTION('',(1.,0.,-0.)); +#86746 = ADVANCED_FACE('',(#86747),#86758,.F.); +#86747 = FACE_BOUND('',#86748,.F.); +#86748 = EDGE_LOOP('',(#86749,#86750,#86751,#86757)); +#86749 = ORIENTED_EDGE('',*,*,#86736,.F.); +#86750 = ORIENTED_EDGE('',*,*,#85579,.T.); +#86751 = ORIENTED_EDGE('',*,*,#86752,.T.); +#86752 = EDGE_CURVE('',#85580,#85622,#86753,.T.); +#86753 = LINE('',#86754,#86755); +#86754 = CARTESIAN_POINT('',(15.35,-2.2,12.9)); +#86755 = VECTOR('',#86756,1.); +#86756 = DIRECTION('',(0.,1.,0.)); +#86757 = ORIENTED_EDGE('',*,*,#85630,.F.); +#86758 = PLANE('',#86759); +#86759 = AXIS2_PLACEMENT_3D('',#86760,#86761,#86762); +#86760 = CARTESIAN_POINT('',(15.35,-2.2,13.6)); +#86761 = DIRECTION('',(1.,0.,0.)); +#86762 = DIRECTION('',(-0.,1.,0.)); +#86763 = ADVANCED_FACE('',(#86764),#86775,.T.); +#86764 = FACE_BOUND('',#86765,.T.); +#86765 = EDGE_LOOP('',(#86766,#86772,#86773,#86774)); +#86766 = ORIENTED_EDGE('',*,*,#86767,.T.); +#86767 = EDGE_CURVE('',#85614,#85588,#86768,.T.); +#86768 = LINE('',#86769,#86770); +#86769 = CARTESIAN_POINT('',(14.65,1.8,12.9)); +#86770 = VECTOR('',#86771,1.); +#86771 = DIRECTION('',(0.,-1.,0.)); +#86772 = ORIENTED_EDGE('',*,*,#85587,.F.); +#86773 = ORIENTED_EDGE('',*,*,#86752,.T.); +#86774 = ORIENTED_EDGE('',*,*,#85621,.F.); +#86775 = PLANE('',#86776); +#86776 = AXIS2_PLACEMENT_3D('',#86777,#86778,#86779); +#86777 = CARTESIAN_POINT('',(15.,-0.2,12.9)); +#86778 = DIRECTION('',(0.,0.,1.)); +#86779 = DIRECTION('',(1.,0.,-0.)); +#86780 = ADVANCED_FACE('',(#86781),#86792,.F.); +#86781 = FACE_BOUND('',#86782,.F.); +#86782 = EDGE_LOOP('',(#86783,#86789,#86790,#86791)); +#86783 = ORIENTED_EDGE('',*,*,#86784,.F.); +#86784 = EDGE_CURVE('',#85605,#85597,#86785,.T.); +#86785 = LINE('',#86786,#86787); +#86786 = CARTESIAN_POINT('',(14.65,1.8,13.6)); +#86787 = VECTOR('',#86788,1.); +#86788 = DIRECTION('',(0.,-1.,0.)); +#86789 = ORIENTED_EDGE('',*,*,#85613,.T.); +#86790 = ORIENTED_EDGE('',*,*,#86767,.T.); +#86791 = ORIENTED_EDGE('',*,*,#85596,.F.); +#86792 = PLANE('',#86793); +#86793 = AXIS2_PLACEMENT_3D('',#86794,#86795,#86796); +#86794 = CARTESIAN_POINT('',(14.65,1.8,13.6)); +#86795 = DIRECTION('',(-1.,0.,0.)); +#86796 = DIRECTION('',(0.,-1.,0.)); +#86797 = ADVANCED_FACE('',(#86798),#86802,.T.); +#86798 = FACE_BOUND('',#86799,.T.); +#86799 = EDGE_LOOP('',(#86800,#86801)); +#86800 = ORIENTED_EDGE('',*,*,#86784,.F.); +#86801 = ORIENTED_EDGE('',*,*,#85604,.T.); +#86802 = PLANE('',#86803); +#86803 = AXIS2_PLACEMENT_3D('',#86804,#86805,#86806); +#86804 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#86805 = DIRECTION('',(0.,0.,1.)); +#86806 = DIRECTION('',(1.,0.,-0.)); +#86807 = ADVANCED_FACE('',(#86808),#86818,.T.); +#86808 = FACE_BOUND('',#86809,.T.); +#86809 = EDGE_LOOP('',(#86810,#86811,#86812)); +#86810 = ORIENTED_EDGE('',*,*,#85714,.T.); +#86811 = ORIENTED_EDGE('',*,*,#85784,.T.); +#86812 = ORIENTED_EDGE('',*,*,#86813,.F.); +#86813 = EDGE_CURVE('',#85715,#85777,#86814,.T.); +#86814 = LINE('',#86815,#86816); +#86815 = CARTESIAN_POINT('',(10.35,-2.2,13.6)); +#86816 = VECTOR('',#86817,1.); +#86817 = DIRECTION('',(0.,1.,0.)); +#86818 = PLANE('',#86819); +#86819 = AXIS2_PLACEMENT_3D('',#86820,#86821,#86822); +#86820 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#86821 = DIRECTION('',(0.,0.,1.)); +#86822 = DIRECTION('',(1.,0.,-0.)); +#86823 = ADVANCED_FACE('',(#86824),#86835,.F.); +#86824 = FACE_BOUND('',#86825,.F.); +#86825 = EDGE_LOOP('',(#86826,#86827,#86828,#86834)); +#86826 = ORIENTED_EDGE('',*,*,#86813,.F.); +#86827 = ORIENTED_EDGE('',*,*,#85725,.T.); +#86828 = ORIENTED_EDGE('',*,*,#86829,.T.); +#86829 = EDGE_CURVE('',#85726,#85768,#86830,.T.); +#86830 = LINE('',#86831,#86832); +#86831 = CARTESIAN_POINT('',(10.35,-2.2,12.9)); +#86832 = VECTOR('',#86833,1.); +#86833 = DIRECTION('',(0.,1.,0.)); +#86834 = ORIENTED_EDGE('',*,*,#85776,.F.); +#86835 = PLANE('',#86836); +#86836 = AXIS2_PLACEMENT_3D('',#86837,#86838,#86839); +#86837 = CARTESIAN_POINT('',(10.35,-2.2,13.6)); +#86838 = DIRECTION('',(1.,0.,0.)); +#86839 = DIRECTION('',(-0.,1.,0.)); +#86840 = ADVANCED_FACE('',(#86841),#86852,.T.); +#86841 = FACE_BOUND('',#86842,.T.); +#86842 = EDGE_LOOP('',(#86843,#86849,#86850,#86851)); +#86843 = ORIENTED_EDGE('',*,*,#86844,.T.); +#86844 = EDGE_CURVE('',#85760,#85734,#86845,.T.); +#86845 = LINE('',#86846,#86847); +#86846 = CARTESIAN_POINT('',(9.65,1.8,12.9)); +#86847 = VECTOR('',#86848,1.); +#86848 = DIRECTION('',(0.,-1.,0.)); +#86849 = ORIENTED_EDGE('',*,*,#85733,.F.); +#86850 = ORIENTED_EDGE('',*,*,#86829,.T.); +#86851 = ORIENTED_EDGE('',*,*,#85767,.F.); +#86852 = PLANE('',#86853); +#86853 = AXIS2_PLACEMENT_3D('',#86854,#86855,#86856); +#86854 = CARTESIAN_POINT('',(10.,-0.2,12.9)); +#86855 = DIRECTION('',(0.,0.,1.)); +#86856 = DIRECTION('',(1.,0.,-0.)); +#86857 = ADVANCED_FACE('',(#86858),#86869,.F.); +#86858 = FACE_BOUND('',#86859,.F.); +#86859 = EDGE_LOOP('',(#86860,#86866,#86867,#86868)); +#86860 = ORIENTED_EDGE('',*,*,#86861,.F.); +#86861 = EDGE_CURVE('',#85751,#85743,#86862,.T.); +#86862 = LINE('',#86863,#86864); +#86863 = CARTESIAN_POINT('',(9.65,1.8,13.6)); +#86864 = VECTOR('',#86865,1.); +#86865 = DIRECTION('',(0.,-1.,0.)); +#86866 = ORIENTED_EDGE('',*,*,#85759,.T.); +#86867 = ORIENTED_EDGE('',*,*,#86844,.T.); +#86868 = ORIENTED_EDGE('',*,*,#85742,.F.); +#86869 = PLANE('',#86870); +#86870 = AXIS2_PLACEMENT_3D('',#86871,#86872,#86873); +#86871 = CARTESIAN_POINT('',(9.65,1.8,13.6)); +#86872 = DIRECTION('',(-1.,0.,0.)); +#86873 = DIRECTION('',(0.,-1.,0.)); +#86874 = ADVANCED_FACE('',(#86875),#86879,.T.); +#86875 = FACE_BOUND('',#86876,.T.); +#86876 = EDGE_LOOP('',(#86877,#86878)); +#86877 = ORIENTED_EDGE('',*,*,#86861,.F.); +#86878 = ORIENTED_EDGE('',*,*,#85750,.T.); +#86879 = PLANE('',#86880); +#86880 = AXIS2_PLACEMENT_3D('',#86881,#86882,#86883); +#86881 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#86882 = DIRECTION('',(0.,0.,1.)); +#86883 = DIRECTION('',(1.,0.,-0.)); +#86884 = ADVANCED_FACE('',(#86885),#86895,.T.); +#86885 = FACE_BOUND('',#86886,.T.); +#86886 = EDGE_LOOP('',(#86887,#86888,#86889)); +#86887 = ORIENTED_EDGE('',*,*,#85860,.T.); +#86888 = ORIENTED_EDGE('',*,*,#85930,.T.); +#86889 = ORIENTED_EDGE('',*,*,#86890,.F.); +#86890 = EDGE_CURVE('',#85861,#85923,#86891,.T.); +#86891 = LINE('',#86892,#86893); +#86892 = CARTESIAN_POINT('',(5.35,-2.2,13.6)); +#86893 = VECTOR('',#86894,1.); +#86894 = DIRECTION('',(0.,1.,0.)); +#86895 = PLANE('',#86896); +#86896 = AXIS2_PLACEMENT_3D('',#86897,#86898,#86899); +#86897 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#86898 = DIRECTION('',(0.,0.,1.)); +#86899 = DIRECTION('',(1.,0.,-0.)); +#86900 = ADVANCED_FACE('',(#86901),#86912,.F.); +#86901 = FACE_BOUND('',#86902,.F.); +#86902 = EDGE_LOOP('',(#86903,#86904,#86905,#86911)); +#86903 = ORIENTED_EDGE('',*,*,#86890,.F.); +#86904 = ORIENTED_EDGE('',*,*,#85871,.T.); +#86905 = ORIENTED_EDGE('',*,*,#86906,.T.); +#86906 = EDGE_CURVE('',#85872,#85914,#86907,.T.); +#86907 = LINE('',#86908,#86909); +#86908 = CARTESIAN_POINT('',(5.35,-2.2,12.9)); +#86909 = VECTOR('',#86910,1.); +#86910 = DIRECTION('',(0.,1.,0.)); +#86911 = ORIENTED_EDGE('',*,*,#85922,.F.); +#86912 = PLANE('',#86913); +#86913 = AXIS2_PLACEMENT_3D('',#86914,#86915,#86916); +#86914 = CARTESIAN_POINT('',(5.35,-2.2,13.6)); +#86915 = DIRECTION('',(1.,0.,0.)); +#86916 = DIRECTION('',(-0.,1.,0.)); +#86917 = ADVANCED_FACE('',(#86918),#86929,.T.); +#86918 = FACE_BOUND('',#86919,.T.); +#86919 = EDGE_LOOP('',(#86920,#86926,#86927,#86928)); +#86920 = ORIENTED_EDGE('',*,*,#86921,.T.); +#86921 = EDGE_CURVE('',#85906,#85880,#86922,.T.); +#86922 = LINE('',#86923,#86924); +#86923 = CARTESIAN_POINT('',(4.65,1.8,12.9)); +#86924 = VECTOR('',#86925,1.); +#86925 = DIRECTION('',(0.,-1.,0.)); +#86926 = ORIENTED_EDGE('',*,*,#85879,.F.); +#86927 = ORIENTED_EDGE('',*,*,#86906,.T.); +#86928 = ORIENTED_EDGE('',*,*,#85913,.F.); +#86929 = PLANE('',#86930); +#86930 = AXIS2_PLACEMENT_3D('',#86931,#86932,#86933); +#86931 = CARTESIAN_POINT('',(5.,-0.2,12.9)); +#86932 = DIRECTION('',(0.,0.,1.)); +#86933 = DIRECTION('',(1.,0.,-0.)); +#86934 = ADVANCED_FACE('',(#86935),#86946,.F.); +#86935 = FACE_BOUND('',#86936,.F.); +#86936 = EDGE_LOOP('',(#86937,#86943,#86944,#86945)); +#86937 = ORIENTED_EDGE('',*,*,#86938,.F.); +#86938 = EDGE_CURVE('',#85897,#85889,#86939,.T.); +#86939 = LINE('',#86940,#86941); +#86940 = CARTESIAN_POINT('',(4.65,1.8,13.6)); +#86941 = VECTOR('',#86942,1.); +#86942 = DIRECTION('',(0.,-1.,0.)); +#86943 = ORIENTED_EDGE('',*,*,#85905,.T.); +#86944 = ORIENTED_EDGE('',*,*,#86921,.T.); +#86945 = ORIENTED_EDGE('',*,*,#85888,.F.); +#86946 = PLANE('',#86947); +#86947 = AXIS2_PLACEMENT_3D('',#86948,#86949,#86950); +#86948 = CARTESIAN_POINT('',(4.65,1.8,13.6)); +#86949 = DIRECTION('',(-1.,0.,0.)); +#86950 = DIRECTION('',(0.,-1.,0.)); +#86951 = ADVANCED_FACE('',(#86952),#86956,.T.); +#86952 = FACE_BOUND('',#86953,.T.); +#86953 = EDGE_LOOP('',(#86954,#86955)); +#86954 = ORIENTED_EDGE('',*,*,#86938,.F.); +#86955 = ORIENTED_EDGE('',*,*,#85896,.T.); +#86956 = PLANE('',#86957); +#86957 = AXIS2_PLACEMENT_3D('',#86958,#86959,#86960); +#86958 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#86959 = DIRECTION('',(0.,0.,1.)); +#86960 = DIRECTION('',(1.,0.,-0.)); +#86961 = ADVANCED_FACE('',(#86962),#86972,.T.); +#86962 = FACE_BOUND('',#86963,.T.); +#86963 = EDGE_LOOP('',(#86964,#86965,#86966)); +#86964 = ORIENTED_EDGE('',*,*,#86006,.T.); +#86965 = ORIENTED_EDGE('',*,*,#86076,.T.); +#86966 = ORIENTED_EDGE('',*,*,#86967,.F.); +#86967 = EDGE_CURVE('',#86007,#86069,#86968,.T.); +#86968 = LINE('',#86969,#86970); +#86969 = CARTESIAN_POINT('',(0.35,-2.2,13.6)); +#86970 = VECTOR('',#86971,1.); +#86971 = DIRECTION('',(0.,1.,0.)); +#86972 = PLANE('',#86973); +#86973 = AXIS2_PLACEMENT_3D('',#86974,#86975,#86976); +#86974 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,13.6)); +#86975 = DIRECTION('',(0.,0.,1.)); +#86976 = DIRECTION('',(1.,0.,-0.)); +#86977 = ADVANCED_FACE('',(#86978),#86989,.F.); +#86978 = FACE_BOUND('',#86979,.F.); +#86979 = EDGE_LOOP('',(#86980,#86981,#86982,#86988)); +#86980 = ORIENTED_EDGE('',*,*,#86967,.F.); +#86981 = ORIENTED_EDGE('',*,*,#86017,.T.); +#86982 = ORIENTED_EDGE('',*,*,#86983,.T.); +#86983 = EDGE_CURVE('',#86018,#86060,#86984,.T.); +#86984 = LINE('',#86985,#86986); +#86985 = CARTESIAN_POINT('',(0.35,-2.2,12.9)); +#86986 = VECTOR('',#86987,1.); +#86987 = DIRECTION('',(0.,1.,0.)); +#86988 = ORIENTED_EDGE('',*,*,#86068,.F.); +#86989 = PLANE('',#86990); +#86990 = AXIS2_PLACEMENT_3D('',#86991,#86992,#86993); +#86991 = CARTESIAN_POINT('',(0.35,-2.2,13.6)); +#86992 = DIRECTION('',(1.,0.,0.)); +#86993 = DIRECTION('',(-0.,1.,0.)); +#86994 = ADVANCED_FACE('',(#86995),#87006,.T.); +#86995 = FACE_BOUND('',#86996,.T.); +#86996 = EDGE_LOOP('',(#86997,#87003,#87004,#87005)); +#86997 = ORIENTED_EDGE('',*,*,#86998,.T.); +#86998 = EDGE_CURVE('',#86052,#86026,#86999,.T.); +#86999 = LINE('',#87000,#87001); +#87000 = CARTESIAN_POINT('',(-0.35,1.8,12.9)); +#87001 = VECTOR('',#87002,1.); +#87002 = DIRECTION('',(0.,-1.,0.)); +#87003 = ORIENTED_EDGE('',*,*,#86025,.F.); +#87004 = ORIENTED_EDGE('',*,*,#86983,.T.); +#87005 = ORIENTED_EDGE('',*,*,#86059,.F.); +#87006 = PLANE('',#87007); +#87007 = AXIS2_PLACEMENT_3D('',#87008,#87009,#87010); +#87008 = CARTESIAN_POINT('',(0.,-0.2,12.9)); +#87009 = DIRECTION('',(0.,0.,1.)); +#87010 = DIRECTION('',(1.,0.,-0.)); +#87011 = ADVANCED_FACE('',(#87012),#87023,.F.); +#87012 = FACE_BOUND('',#87013,.F.); +#87013 = EDGE_LOOP('',(#87014,#87020,#87021,#87022)); +#87014 = ORIENTED_EDGE('',*,*,#87015,.F.); +#87015 = EDGE_CURVE('',#86043,#86035,#87016,.T.); +#87016 = LINE('',#87017,#87018); +#87017 = CARTESIAN_POINT('',(-0.35,1.8,13.6)); +#87018 = VECTOR('',#87019,1.); +#87019 = DIRECTION('',(0.,-1.,0.)); +#87020 = ORIENTED_EDGE('',*,*,#86051,.T.); +#87021 = ORIENTED_EDGE('',*,*,#86998,.T.); +#87022 = ORIENTED_EDGE('',*,*,#86034,.F.); +#87023 = PLANE('',#87024); +#87024 = AXIS2_PLACEMENT_3D('',#87025,#87026,#87027); +#87025 = CARTESIAN_POINT('',(-0.35,1.8,13.6)); +#87026 = DIRECTION('',(-1.,0.,0.)); +#87027 = DIRECTION('',(0.,-1.,0.)); +#87028 = ADVANCED_FACE('',(#87029),#87033,.T.); +#87029 = FACE_BOUND('',#87030,.T.); +#87030 = EDGE_LOOP('',(#87031,#87032)); +#87031 = ORIENTED_EDGE('',*,*,#87015,.F.); +#87032 = ORIENTED_EDGE('',*,*,#86042,.T.); +#87033 = PLANE('',#87034); +#87034 = AXIS2_PLACEMENT_3D('',#87035,#87036,#87037); +#87035 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,13.6)); +#87036 = DIRECTION('',(0.,0.,1.)); +#87037 = DIRECTION('',(1.,0.,-0.)); +#87038 = ADVANCED_FACE('',(#87039),#87045,.T.); +#87039 = FACE_BOUND('',#87040,.T.); +#87040 = EDGE_LOOP('',(#87041,#87042,#87043,#87044)); +#87041 = ORIENTED_EDGE('',*,*,#86178,.T.); +#87042 = ORIENTED_EDGE('',*,*,#86154,.T.); +#87043 = ORIENTED_EDGE('',*,*,#86219,.T.); +#87044 = ORIENTED_EDGE('',*,*,#86202,.T.); +#87045 = PLANE('',#87046); +#87046 = AXIS2_PLACEMENT_3D('',#87047,#87048,#87049); +#87047 = CARTESIAN_POINT('',(20.,2.,3.75)); +#87048 = DIRECTION('',(-0.,-1.,-0.)); +#87049 = DIRECTION('',(0.,0.,-1.)); +#87050 = ADVANCED_FACE('',(#87051),#87057,.T.); +#87051 = FACE_BOUND('',#87052,.T.); +#87052 = EDGE_LOOP('',(#87053,#87054,#87055,#87056)); +#87053 = ORIENTED_EDGE('',*,*,#86284,.T.); +#87054 = ORIENTED_EDGE('',*,*,#86260,.T.); +#87055 = ORIENTED_EDGE('',*,*,#86325,.T.); +#87056 = ORIENTED_EDGE('',*,*,#86308,.T.); +#87057 = PLANE('',#87058); +#87058 = AXIS2_PLACEMENT_3D('',#87059,#87060,#87061); +#87059 = CARTESIAN_POINT('',(15.,2.,3.75)); +#87060 = DIRECTION('',(-0.,-1.,-0.)); +#87061 = DIRECTION('',(0.,0.,-1.)); +#87062 = ADVANCED_FACE('',(#87063),#87069,.T.); +#87063 = FACE_BOUND('',#87064,.T.); +#87064 = EDGE_LOOP('',(#87065,#87066,#87067,#87068)); +#87065 = ORIENTED_EDGE('',*,*,#86390,.T.); +#87066 = ORIENTED_EDGE('',*,*,#86366,.T.); +#87067 = ORIENTED_EDGE('',*,*,#86431,.T.); +#87068 = ORIENTED_EDGE('',*,*,#86414,.T.); +#87069 = PLANE('',#87070); +#87070 = AXIS2_PLACEMENT_3D('',#87071,#87072,#87073); +#87071 = CARTESIAN_POINT('',(10.,2.,3.75)); +#87072 = DIRECTION('',(-0.,-1.,-0.)); +#87073 = DIRECTION('',(0.,0.,-1.)); +#87074 = ADVANCED_FACE('',(#87075),#87081,.T.); +#87075 = FACE_BOUND('',#87076,.T.); +#87076 = EDGE_LOOP('',(#87077,#87078,#87079,#87080)); +#87077 = ORIENTED_EDGE('',*,*,#86496,.T.); +#87078 = ORIENTED_EDGE('',*,*,#86472,.T.); +#87079 = ORIENTED_EDGE('',*,*,#86537,.T.); +#87080 = ORIENTED_EDGE('',*,*,#86520,.T.); +#87081 = PLANE('',#87082); +#87082 = AXIS2_PLACEMENT_3D('',#87083,#87084,#87085); +#87083 = CARTESIAN_POINT('',(5.,2.,3.75)); +#87084 = DIRECTION('',(-0.,-1.,-0.)); +#87085 = DIRECTION('',(0.,0.,-1.)); +#87086 = ADVANCED_FACE('',(#87087),#87093,.T.); +#87087 = FACE_BOUND('',#87088,.T.); +#87088 = EDGE_LOOP('',(#87089,#87090,#87091,#87092)); +#87089 = ORIENTED_EDGE('',*,*,#86602,.T.); +#87090 = ORIENTED_EDGE('',*,*,#86578,.T.); +#87091 = ORIENTED_EDGE('',*,*,#86643,.T.); +#87092 = ORIENTED_EDGE('',*,*,#86626,.T.); +#87093 = PLANE('',#87094); +#87094 = AXIS2_PLACEMENT_3D('',#87095,#87096,#87097); +#87095 = CARTESIAN_POINT('',(4.440892098501E-16,2.,3.75)); +#87096 = DIRECTION('',(-0.,-1.,-0.)); +#87097 = DIRECTION('',(0.,0.,-1.)); +#87098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#87102)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#87099,#87100,#87101)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#87099 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#87100 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#87101 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#87102 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#87099, + 'distance_accuracy_value','confusion accuracy'); +#87103 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#87104,#87106); +#87104 = ( REPRESENTATION_RELATIONSHIP('','',#81314,#81291) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#87105) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#87105 = ITEM_DEFINED_TRANSFORMATION('','',#11,#81292); +#87106 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #87107); +#87107 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('94','=>[0:1:1:43]','',#81286, + #81309,$); +#87108 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#81311)); +#87109 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#87110,#87112); +#87110 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#87111) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#87111 = ITEM_DEFINED_TRANSFORMATION('','',#11,#311); +#87112 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #87113); +#87113 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('96','R52','',#5,#523,$); +#87114 = SHAPE_DEFINITION_REPRESENTATION(#87115,#87121); +#87115 = PRODUCT_DEFINITION_SHAPE('','',#87116); +#87116 = PRODUCT_DEFINITION('design','',#87117,#87120); +#87117 = PRODUCT_DEFINITION_FORMATION('','',#87118); +#87118 = PRODUCT('Relay_SPDT_Omron_G5V-1','Relay_SPDT_Omron_G5V-1','',( + #87119)); +#87119 = PRODUCT_CONTEXT('',#2,'mechanical'); +#87120 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#87121 = SHAPE_REPRESENTATION('',(#11,#87122),#87126); +#87122 = AXIS2_PLACEMENT_3D('',#87123,#87124,#87125); +#87123 = CARTESIAN_POINT('',(0.,0.,0.)); +#87124 = DIRECTION('',(0.,0.,1.)); +#87125 = DIRECTION('',(1.,0.,-0.)); +#87126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#87130)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#87127,#87128,#87129)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#87127 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#87128 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#87129 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#87130 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#87127, + 'distance_accuracy_value','confusion accuracy'); +#87131 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#87132,#87134); +#87132 = ( REPRESENTATION_RELATIONSHIP('','',#87121,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#87133) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#87133 = ITEM_DEFINED_TRANSFORMATION('','',#11,#315); +#87134 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #87135); +#87135 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('98','K1','',#5,#87116,$); +#87136 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#87118)); +#87137 = SHAPE_DEFINITION_REPRESENTATION(#87138,#87144); +#87138 = PRODUCT_DEFINITION_SHAPE('','',#87139); +#87139 = PRODUCT_DEFINITION('design','',#87140,#87143); +#87140 = PRODUCT_DEFINITION_FORMATION('','',#87141); +#87141 = PRODUCT('Relay_SPDT_Omron_G5V-1','Relay_SPDT_Omron_G5V-1','',( + #87142)); +#87142 = PRODUCT_CONTEXT('',#2,'mechanical'); +#87143 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#87144 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#87145),#88945); +#87145 = MANIFOLD_SOLID_BREP('',#87146); +#87146 = CLOSED_SHELL('',(#87147,#87211,#87251,#87276,#87300,#87399, + #87432,#87770,#87861,#87910,#87935,#87953,#87970,#87987,#88004, + #88021,#88038,#88062,#88072,#88096,#88106,#88130,#88140,#88164, + #88174,#88205,#88229,#88253,#88270,#88301,#88325,#88349,#88366, + #88397,#88421,#88445,#88462,#88493,#88517,#88541,#88558,#88589, + #88613,#88637,#88654,#88685,#88709,#88733,#88750,#88774,#88791, + #88808,#88821,#88833,#88843,#88853,#88863,#88873,#88885,#88897, + #88909,#88921,#88933)); +#87147 = ADVANCED_FACE('',(#87148),#87206,.F.); +#87148 = FACE_BOUND('',#87149,.F.); +#87149 = EDGE_LOOP('',(#87150,#87160,#87168,#87176,#87184,#87192,#87200) + ); +#87150 = ORIENTED_EDGE('',*,*,#87151,.F.); +#87151 = EDGE_CURVE('',#87152,#87154,#87156,.T.); +#87152 = VERTEX_POINT('',#87153); +#87153 = CARTESIAN_POINT('',(4.6,1.07,9.85)); +#87154 = VERTEX_POINT('',#87155); +#87155 = CARTESIAN_POINT('',(4.69,1.07,9.76)); +#87156 = LINE('',#87157,#87158); +#87157 = CARTESIAN_POINT('',(7.32,1.07,7.13)); +#87158 = VECTOR('',#87159,1.); +#87159 = DIRECTION('',(0.707106781187,-6.280369834731E-16, + -0.707106781187)); +#87160 = ORIENTED_EDGE('',*,*,#87161,.T.); +#87161 = EDGE_CURVE('',#87152,#87162,#87164,.T.); +#87162 = VERTEX_POINT('',#87163); +#87163 = CARTESIAN_POINT('',(-1.11,1.07,9.85)); +#87164 = LINE('',#87165,#87166); +#87165 = CARTESIAN_POINT('',(4.45,1.07,9.85)); +#87166 = VECTOR('',#87167,1.); +#87167 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87168 = ORIENTED_EDGE('',*,*,#87169,.F.); +#87169 = EDGE_CURVE('',#87170,#87162,#87172,.T.); +#87170 = VERTEX_POINT('',#87171); +#87171 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87172 = LINE('',#87173,#87174); +#87173 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87174 = VECTOR('',#87175,1.); +#87175 = DIRECTION('',(0.,0.,1.)); +#87176 = ORIENTED_EDGE('',*,*,#87177,.F.); +#87177 = EDGE_CURVE('',#87178,#87170,#87180,.T.); +#87178 = VERTEX_POINT('',#87179); +#87179 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87180 = LINE('',#87181,#87182); +#87181 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87182 = VECTOR('',#87183,1.); +#87183 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87184 = ORIENTED_EDGE('',*,*,#87185,.T.); +#87185 = EDGE_CURVE('',#87178,#87186,#87188,.T.); +#87186 = VERTEX_POINT('',#87187); +#87187 = CARTESIAN_POINT('',(6.19,1.07,9.75)); +#87188 = LINE('',#87189,#87190); +#87189 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87190 = VECTOR('',#87191,1.); +#87191 = DIRECTION('',(0.,0.,1.)); +#87192 = ORIENTED_EDGE('',*,*,#87193,.F.); +#87193 = EDGE_CURVE('',#87194,#87186,#87196,.T.); +#87194 = VERTEX_POINT('',#87195); +#87195 = CARTESIAN_POINT('',(4.69,1.07,9.75)); +#87196 = LINE('',#87197,#87198); +#87197 = CARTESIAN_POINT('',(4.69,1.07,9.75)); +#87198 = VECTOR('',#87199,1.); +#87199 = DIRECTION('',(1.,3.330669073875E-16,0.)); +#87200 = ORIENTED_EDGE('',*,*,#87201,.F.); +#87201 = EDGE_CURVE('',#87154,#87194,#87202,.T.); +#87202 = LINE('',#87203,#87204); +#87203 = CARTESIAN_POINT('',(4.69,1.07,10.)); +#87204 = VECTOR('',#87205,1.); +#87205 = DIRECTION('',(-0.,0.,-1.)); +#87206 = PLANE('',#87207); +#87207 = AXIS2_PLACEMENT_3D('',#87208,#87209,#87210); +#87208 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87209 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87210 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87211 = ADVANCED_FACE('',(#87212),#87246,.F.); +#87212 = FACE_BOUND('',#87213,.T.); +#87213 = EDGE_LOOP('',(#87214,#87215,#87224,#87232,#87240)); +#87214 = ORIENTED_EDGE('',*,*,#87151,.F.); +#87215 = ORIENTED_EDGE('',*,*,#87216,.T.); +#87216 = EDGE_CURVE('',#87152,#87217,#87219,.T.); +#87217 = VERTEX_POINT('',#87218); +#87218 = CARTESIAN_POINT('',(4.45,0.92,10.)); +#87219 = ELLIPSE('',#87220,0.212132034356,0.15); +#87220 = AXIS2_PLACEMENT_3D('',#87221,#87222,#87223); +#87221 = CARTESIAN_POINT('',(4.6,0.92,9.85)); +#87222 = DIRECTION('',(0.707106781187,-9.45232398609E-17,0.707106781187) + ); +#87223 = DIRECTION('',(-0.707106781187,1.161550727085E-15,0.707106781187 + )); +#87224 = ORIENTED_EDGE('',*,*,#87225,.T.); +#87225 = EDGE_CURVE('',#87217,#87226,#87228,.T.); +#87226 = VERTEX_POINT('',#87227); +#87227 = CARTESIAN_POINT('',(4.45,0.570000029651,10.)); +#87228 = LINE('',#87229,#87230); +#87229 = CARTESIAN_POINT('',(4.45,1.07,10.)); +#87230 = VECTOR('',#87231,1.); +#87231 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87232 = ORIENTED_EDGE('',*,*,#87233,.T.); +#87233 = EDGE_CURVE('',#87226,#87234,#87236,.T.); +#87234 = VERTEX_POINT('',#87235); +#87235 = CARTESIAN_POINT('',(4.69,0.570000029651,9.76)); +#87236 = LINE('',#87237,#87238); +#87237 = CARTESIAN_POINT('',(4.57,0.570000029651,9.88)); +#87238 = VECTOR('',#87239,1.); +#87239 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + -0.707106781187)); +#87240 = ORIENTED_EDGE('',*,*,#87241,.F.); +#87241 = EDGE_CURVE('',#87154,#87234,#87242,.T.); +#87242 = LINE('',#87243,#87244); +#87243 = CARTESIAN_POINT('',(4.69,1.07,9.76)); +#87244 = VECTOR('',#87245,1.); +#87245 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87246 = PLANE('',#87247); +#87247 = AXIS2_PLACEMENT_3D('',#87248,#87249,#87250); +#87248 = CARTESIAN_POINT('',(4.57,1.07,9.88)); +#87249 = DIRECTION('',(-0.707106781187,9.45232398609E-17,-0.707106781187 + )); +#87250 = DIRECTION('',(1.223491751166E-16,1.,1.132687265409E-17)); +#87251 = ADVANCED_FACE('',(#87252),#87271,.T.); +#87252 = FACE_BOUND('',#87253,.T.); +#87253 = EDGE_LOOP('',(#87254,#87255,#87264,#87270)); +#87254 = ORIENTED_EDGE('',*,*,#87161,.T.); +#87255 = ORIENTED_EDGE('',*,*,#87256,.T.); +#87256 = EDGE_CURVE('',#87162,#87257,#87259,.T.); +#87257 = VERTEX_POINT('',#87258); +#87258 = CARTESIAN_POINT('',(-0.96,0.92,10.)); +#87259 = ELLIPSE('',#87260,0.212132034356,0.15); +#87260 = AXIS2_PLACEMENT_3D('',#87261,#87262,#87263); +#87261 = CARTESIAN_POINT('',(-0.96,0.92,9.85)); +#87262 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#87263 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#87264 = ORIENTED_EDGE('',*,*,#87265,.F.); +#87265 = EDGE_CURVE('',#87217,#87257,#87266,.T.); +#87266 = LINE('',#87267,#87268); +#87267 = CARTESIAN_POINT('',(4.45,0.92,10.)); +#87268 = VECTOR('',#87269,1.); +#87269 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87270 = ORIENTED_EDGE('',*,*,#87216,.F.); +#87271 = CYLINDRICAL_SURFACE('',#87272,0.15); +#87272 = AXIS2_PLACEMENT_3D('',#87273,#87274,#87275); +#87273 = CARTESIAN_POINT('',(4.45,0.92,9.85)); +#87274 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87275 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87276 = ADVANCED_FACE('',(#87277),#87295,.T.); +#87277 = FACE_BOUND('',#87278,.T.); +#87278 = EDGE_LOOP('',(#87279,#87287,#87293,#87294)); +#87279 = ORIENTED_EDGE('',*,*,#87280,.T.); +#87280 = EDGE_CURVE('',#87234,#87281,#87283,.T.); +#87281 = VERTEX_POINT('',#87282); +#87282 = CARTESIAN_POINT('',(4.69,0.570000029651,9.75)); +#87283 = LINE('',#87284,#87285); +#87284 = CARTESIAN_POINT('',(4.69,0.570000029651,10.)); +#87285 = VECTOR('',#87286,1.); +#87286 = DIRECTION('',(-0.,0.,-1.)); +#87287 = ORIENTED_EDGE('',*,*,#87288,.T.); +#87288 = EDGE_CURVE('',#87281,#87194,#87289,.T.); +#87289 = LINE('',#87290,#87291); +#87290 = CARTESIAN_POINT('',(4.69,0.570000029651,9.75)); +#87291 = VECTOR('',#87292,1.); +#87292 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#87293 = ORIENTED_EDGE('',*,*,#87201,.F.); +#87294 = ORIENTED_EDGE('',*,*,#87241,.T.); +#87295 = PLANE('',#87296); +#87296 = AXIS2_PLACEMENT_3D('',#87297,#87298,#87299); +#87297 = CARTESIAN_POINT('',(4.69,0.570000029651,10.)); +#87298 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#87299 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#87300 = ADVANCED_FACE('',(#87301),#87394,.F.); +#87301 = FACE_BOUND('',#87302,.F.); +#87302 = EDGE_LOOP('',(#87303,#87304,#87312,#87320,#87328,#87337,#87345, + #87354,#87362,#87371,#87379,#87388)); +#87303 = ORIENTED_EDGE('',*,*,#87169,.T.); +#87304 = ORIENTED_EDGE('',*,*,#87305,.T.); +#87305 = EDGE_CURVE('',#87162,#87306,#87308,.T.); +#87306 = VERTEX_POINT('',#87307); +#87307 = CARTESIAN_POINT('',(-1.11,-11.23,9.85)); +#87308 = LINE('',#87309,#87310); +#87309 = CARTESIAN_POINT('',(-1.11,1.07,9.85)); +#87310 = VECTOR('',#87311,1.); +#87311 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87312 = ORIENTED_EDGE('',*,*,#87313,.F.); +#87313 = EDGE_CURVE('',#87314,#87306,#87316,.T.); +#87314 = VERTEX_POINT('',#87315); +#87315 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#87316 = LINE('',#87317,#87318); +#87317 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#87318 = VECTOR('',#87319,1.); +#87319 = DIRECTION('',(0.,0.,1.)); +#87320 = ORIENTED_EDGE('',*,*,#87321,.F.); +#87321 = EDGE_CURVE('',#87322,#87314,#87324,.T.); +#87322 = VERTEX_POINT('',#87323); +#87323 = CARTESIAN_POINT('',(-1.11,-9.949950493836,0.5)); +#87324 = LINE('',#87325,#87326); +#87325 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87326 = VECTOR('',#87327,1.); +#87327 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87328 = ORIENTED_EDGE('',*,*,#87329,.F.); +#87329 = EDGE_CURVE('',#87330,#87322,#87332,.T.); +#87330 = VERTEX_POINT('',#87331); +#87331 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#87332 = CIRCLE('',#87333,1.27); +#87333 = AXIS2_PLACEMENT_3D('',#87334,#87335,#87336); +#87334 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#87335 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87336 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87337 = ORIENTED_EDGE('',*,*,#87338,.T.); +#87338 = EDGE_CURVE('',#87330,#87339,#87341,.T.); +#87339 = VERTEX_POINT('',#87340); +#87340 = CARTESIAN_POINT('',(-1.11,-7.67,1.27)); +#87341 = LINE('',#87342,#87343); +#87342 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#87343 = VECTOR('',#87344,1.); +#87344 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87345 = ORIENTED_EDGE('',*,*,#87346,.F.); +#87346 = EDGE_CURVE('',#87347,#87339,#87349,.T.); +#87347 = VERTEX_POINT('',#87348); +#87348 = CARTESIAN_POINT('',(-1.11,-7.930049506164,0.5)); +#87349 = CIRCLE('',#87350,1.27); +#87350 = AXIS2_PLACEMENT_3D('',#87351,#87352,#87353); +#87351 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#87352 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87353 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87354 = ORIENTED_EDGE('',*,*,#87355,.F.); +#87355 = EDGE_CURVE('',#87356,#87347,#87358,.T.); +#87356 = VERTEX_POINT('',#87357); +#87357 = CARTESIAN_POINT('',(-1.11,-2.279950493836,0.5)); +#87358 = LINE('',#87359,#87360); +#87359 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87360 = VECTOR('',#87361,1.); +#87361 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87362 = ORIENTED_EDGE('',*,*,#87363,.F.); +#87363 = EDGE_CURVE('',#87364,#87356,#87366,.T.); +#87364 = VERTEX_POINT('',#87365); +#87365 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#87366 = CIRCLE('',#87367,1.27); +#87367 = AXIS2_PLACEMENT_3D('',#87368,#87369,#87370); +#87368 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#87369 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87370 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87371 = ORIENTED_EDGE('',*,*,#87372,.T.); +#87372 = EDGE_CURVE('',#87364,#87373,#87375,.T.); +#87373 = VERTEX_POINT('',#87374); +#87374 = CARTESIAN_POINT('',(-1.11,1.409983241274E-16,1.27)); +#87375 = LINE('',#87376,#87377); +#87376 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#87377 = VECTOR('',#87378,1.); +#87378 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87379 = ORIENTED_EDGE('',*,*,#87380,.F.); +#87380 = EDGE_CURVE('',#87381,#87373,#87383,.T.); +#87381 = VERTEX_POINT('',#87382); +#87382 = CARTESIAN_POINT('',(-1.11,-0.260049506164,0.5)); +#87383 = CIRCLE('',#87384,1.27); +#87384 = AXIS2_PLACEMENT_3D('',#87385,#87386,#87387); +#87385 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#87386 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87387 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87388 = ORIENTED_EDGE('',*,*,#87389,.F.); +#87389 = EDGE_CURVE('',#87170,#87381,#87390,.T.); +#87390 = LINE('',#87391,#87392); +#87391 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87392 = VECTOR('',#87393,1.); +#87393 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87394 = PLANE('',#87395); +#87395 = AXIS2_PLACEMENT_3D('',#87396,#87397,#87398); +#87396 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87397 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#87398 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87399 = ADVANCED_FACE('',(#87400),#87427,.F.); +#87400 = FACE_BOUND('',#87401,.F.); +#87401 = EDGE_LOOP('',(#87402,#87411,#87412,#87413,#87421)); +#87402 = ORIENTED_EDGE('',*,*,#87403,.F.); +#87403 = EDGE_CURVE('',#87281,#87404,#87406,.T.); +#87404 = VERTEX_POINT('',#87405); +#87405 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.75)); +#87406 = CIRCLE('',#87407,1.); +#87407 = AXIS2_PLACEMENT_3D('',#87408,#87409,#87410); +#87408 = CARTESIAN_POINT('',(5.69,0.57,9.75)); +#87409 = DIRECTION('',(0.,0.,1.)); +#87410 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87411 = ORIENTED_EDGE('',*,*,#87288,.T.); +#87412 = ORIENTED_EDGE('',*,*,#87193,.T.); +#87413 = ORIENTED_EDGE('',*,*,#87414,.T.); +#87414 = EDGE_CURVE('',#87186,#87415,#87417,.T.); +#87415 = VERTEX_POINT('',#87416); +#87416 = CARTESIAN_POINT('',(6.19,-0.429999999999,9.75)); +#87417 = LINE('',#87418,#87419); +#87418 = CARTESIAN_POINT('',(6.19,1.07,9.75)); +#87419 = VECTOR('',#87420,1.); +#87420 = DIRECTION('',(4.810966440044E-16,-1.,0.)); +#87421 = ORIENTED_EDGE('',*,*,#87422,.T.); +#87422 = EDGE_CURVE('',#87415,#87404,#87423,.T.); +#87423 = LINE('',#87424,#87425); +#87424 = CARTESIAN_POINT('',(6.19,-0.429999999999,9.75)); +#87425 = VECTOR('',#87426,1.); +#87426 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#87427 = PLANE('',#87428); +#87428 = AXIS2_PLACEMENT_3D('',#87429,#87430,#87431); +#87429 = CARTESIAN_POINT('',(4.69,0.570000029651,9.75)); +#87430 = DIRECTION('',(0.,0.,-1.)); +#87431 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#87432 = ADVANCED_FACE('',(#87433,#87561,#87595,#87629,#87663,#87697, + #87731),#87765,.T.); +#87433 = FACE_BOUND('',#87434,.T.); +#87434 = EDGE_LOOP('',(#87435,#87436,#87437,#87445,#87453,#87461,#87469, + #87477,#87485,#87493,#87501,#87509,#87515,#87516,#87524,#87532, + #87538,#87539,#87547,#87555)); +#87435 = ORIENTED_EDGE('',*,*,#87389,.F.); +#87436 = ORIENTED_EDGE('',*,*,#87177,.F.); +#87437 = ORIENTED_EDGE('',*,*,#87438,.F.); +#87438 = EDGE_CURVE('',#87439,#87178,#87441,.T.); +#87439 = VERTEX_POINT('',#87440); +#87440 = CARTESIAN_POINT('',(6.19,-0.260049506164,0.5)); +#87441 = LINE('',#87442,#87443); +#87442 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87443 = VECTOR('',#87444,1.); +#87444 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87445 = ORIENTED_EDGE('',*,*,#87446,.F.); +#87446 = EDGE_CURVE('',#87447,#87439,#87449,.T.); +#87447 = VERTEX_POINT('',#87448); +#87448 = CARTESIAN_POINT('',(5.89,-0.260049506164,0.5)); +#87449 = LINE('',#87450,#87451); +#87450 = CARTESIAN_POINT('',(6.19,-0.260049506164,0.5)); +#87451 = VECTOR('',#87452,1.); +#87452 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87453 = ORIENTED_EDGE('',*,*,#87454,.T.); +#87454 = EDGE_CURVE('',#87447,#87455,#87457,.T.); +#87455 = VERTEX_POINT('',#87456); +#87456 = CARTESIAN_POINT('',(5.89,-2.279950493836,0.5)); +#87457 = LINE('',#87458,#87459); +#87458 = CARTESIAN_POINT('',(5.89,-0.735,0.5)); +#87459 = VECTOR('',#87460,1.); +#87460 = DIRECTION('',(5.401060556461E-31,-1.,0.)); +#87461 = ORIENTED_EDGE('',*,*,#87462,.T.); +#87462 = EDGE_CURVE('',#87455,#87463,#87465,.T.); +#87463 = VERTEX_POINT('',#87464); +#87464 = CARTESIAN_POINT('',(6.19,-2.279950493836,0.5)); +#87465 = LINE('',#87466,#87467); +#87466 = CARTESIAN_POINT('',(6.19,-2.279950493836,0.5)); +#87467 = VECTOR('',#87468,1.); +#87468 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87469 = ORIENTED_EDGE('',*,*,#87470,.F.); +#87470 = EDGE_CURVE('',#87471,#87463,#87473,.T.); +#87471 = VERTEX_POINT('',#87472); +#87472 = CARTESIAN_POINT('',(6.19,-7.930049506164,0.5)); +#87473 = LINE('',#87474,#87475); +#87474 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87475 = VECTOR('',#87476,1.); +#87476 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87477 = ORIENTED_EDGE('',*,*,#87478,.F.); +#87478 = EDGE_CURVE('',#87479,#87471,#87481,.T.); +#87479 = VERTEX_POINT('',#87480); +#87480 = CARTESIAN_POINT('',(5.89,-7.930049506164,0.5)); +#87481 = LINE('',#87482,#87483); +#87482 = CARTESIAN_POINT('',(6.19,-7.930049506164,0.5)); +#87483 = VECTOR('',#87484,1.); +#87484 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87485 = ORIENTED_EDGE('',*,*,#87486,.T.); +#87486 = EDGE_CURVE('',#87479,#87487,#87489,.T.); +#87487 = VERTEX_POINT('',#87488); +#87488 = CARTESIAN_POINT('',(5.89,-9.949950493836,0.5)); +#87489 = LINE('',#87490,#87491); +#87490 = CARTESIAN_POINT('',(5.89,-4.57,0.5)); +#87491 = VECTOR('',#87492,1.); +#87492 = DIRECTION('',(5.401060556461E-31,-1.,0.)); +#87493 = ORIENTED_EDGE('',*,*,#87494,.T.); +#87494 = EDGE_CURVE('',#87487,#87495,#87497,.T.); +#87495 = VERTEX_POINT('',#87496); +#87496 = CARTESIAN_POINT('',(6.19,-9.949950493836,0.5)); +#87497 = LINE('',#87498,#87499); +#87498 = CARTESIAN_POINT('',(6.19,-9.949950493836,0.5)); +#87499 = VECTOR('',#87500,1.); +#87500 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87501 = ORIENTED_EDGE('',*,*,#87502,.F.); +#87502 = EDGE_CURVE('',#87503,#87495,#87505,.T.); +#87503 = VERTEX_POINT('',#87504); +#87504 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87505 = LINE('',#87506,#87507); +#87506 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87507 = VECTOR('',#87508,1.); +#87508 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87509 = ORIENTED_EDGE('',*,*,#87510,.F.); +#87510 = EDGE_CURVE('',#87314,#87503,#87511,.T.); +#87511 = LINE('',#87512,#87513); +#87512 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#87513 = VECTOR('',#87514,1.); +#87514 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#87515 = ORIENTED_EDGE('',*,*,#87321,.F.); +#87516 = ORIENTED_EDGE('',*,*,#87517,.F.); +#87517 = EDGE_CURVE('',#87518,#87322,#87520,.T.); +#87518 = VERTEX_POINT('',#87519); +#87519 = CARTESIAN_POINT('',(-0.81,-9.949950493836,0.5)); +#87520 = LINE('',#87521,#87522); +#87521 = CARTESIAN_POINT('',(-1.11,-9.949950493836,0.5)); +#87522 = VECTOR('',#87523,1.); +#87523 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87524 = ORIENTED_EDGE('',*,*,#87525,.F.); +#87525 = EDGE_CURVE('',#87526,#87518,#87528,.T.); +#87526 = VERTEX_POINT('',#87527); +#87527 = CARTESIAN_POINT('',(-0.81,-7.930049506164,0.5)); +#87528 = LINE('',#87529,#87530); +#87529 = CARTESIAN_POINT('',(-0.81,-4.57,0.5)); +#87530 = VECTOR('',#87531,1.); +#87531 = DIRECTION('',(-3.49676543189E-16,-1.,0.)); +#87532 = ORIENTED_EDGE('',*,*,#87533,.T.); +#87533 = EDGE_CURVE('',#87526,#87347,#87534,.T.); +#87534 = LINE('',#87535,#87536); +#87535 = CARTESIAN_POINT('',(-1.11,-7.930049506164,0.5)); +#87536 = VECTOR('',#87537,1.); +#87537 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87538 = ORIENTED_EDGE('',*,*,#87355,.F.); +#87539 = ORIENTED_EDGE('',*,*,#87540,.F.); +#87540 = EDGE_CURVE('',#87541,#87356,#87543,.T.); +#87541 = VERTEX_POINT('',#87542); +#87542 = CARTESIAN_POINT('',(-0.81,-2.279950493836,0.5)); +#87543 = LINE('',#87544,#87545); +#87544 = CARTESIAN_POINT('',(-1.11,-2.279950493836,0.5)); +#87545 = VECTOR('',#87546,1.); +#87546 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87547 = ORIENTED_EDGE('',*,*,#87548,.F.); +#87548 = EDGE_CURVE('',#87549,#87541,#87551,.T.); +#87549 = VERTEX_POINT('',#87550); +#87550 = CARTESIAN_POINT('',(-0.81,-0.260049506164,0.5)); +#87551 = LINE('',#87552,#87553); +#87552 = CARTESIAN_POINT('',(-0.81,-0.735,0.5)); +#87553 = VECTOR('',#87554,1.); +#87554 = DIRECTION('',(-1.748382715945E-16,-1.,0.)); +#87555 = ORIENTED_EDGE('',*,*,#87556,.T.); +#87556 = EDGE_CURVE('',#87549,#87381,#87557,.T.); +#87557 = LINE('',#87558,#87559); +#87558 = CARTESIAN_POINT('',(-1.11,-0.260049506164,0.5)); +#87559 = VECTOR('',#87560,1.); +#87560 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87561 = FACE_BOUND('',#87562,.T.); +#87562 = EDGE_LOOP('',(#87563,#87573,#87581,#87589)); +#87563 = ORIENTED_EDGE('',*,*,#87564,.T.); +#87564 = EDGE_CURVE('',#87565,#87567,#87569,.T.); +#87565 = VERTEX_POINT('',#87566); +#87566 = CARTESIAN_POINT('',(4.93,-2.49,0.5)); +#87567 = VERTEX_POINT('',#87568); +#87568 = CARTESIAN_POINT('',(4.93,-2.79,0.5)); +#87569 = LINE('',#87570,#87571); +#87570 = CARTESIAN_POINT('',(4.93,-0.86,0.5)); +#87571 = VECTOR('',#87572,1.); +#87572 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87573 = ORIENTED_EDGE('',*,*,#87574,.T.); +#87574 = EDGE_CURVE('',#87567,#87575,#87577,.T.); +#87575 = VERTEX_POINT('',#87576); +#87576 = CARTESIAN_POINT('',(5.23,-2.79,0.5)); +#87577 = LINE('',#87578,#87579); +#87578 = CARTESIAN_POINT('',(2.06,-2.79,0.5)); +#87579 = VECTOR('',#87580,1.); +#87580 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87581 = ORIENTED_EDGE('',*,*,#87582,.T.); +#87582 = EDGE_CURVE('',#87575,#87583,#87585,.T.); +#87583 = VERTEX_POINT('',#87584); +#87584 = CARTESIAN_POINT('',(5.23,-2.49,0.5)); +#87585 = LINE('',#87586,#87587); +#87586 = CARTESIAN_POINT('',(5.23,-0.71,0.5)); +#87587 = VECTOR('',#87588,1.); +#87588 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87589 = ORIENTED_EDGE('',*,*,#87590,.T.); +#87590 = EDGE_CURVE('',#87583,#87565,#87591,.T.); +#87591 = LINE('',#87592,#87593); +#87592 = CARTESIAN_POINT('',(1.91,-2.49,0.5)); +#87593 = VECTOR('',#87594,1.); +#87594 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87595 = FACE_BOUND('',#87596,.T.); +#87596 = EDGE_LOOP('',(#87597,#87607,#87615,#87623)); +#87597 = ORIENTED_EDGE('',*,*,#87598,.F.); +#87598 = EDGE_CURVE('',#87599,#87601,#87603,.T.); +#87599 = VERTEX_POINT('',#87600); +#87600 = CARTESIAN_POINT('',(-0.15,-2.49,0.5)); +#87601 = VERTEX_POINT('',#87602); +#87602 = CARTESIAN_POINT('',(0.15,-2.49,0.5)); +#87603 = LINE('',#87604,#87605); +#87604 = CARTESIAN_POINT('',(-0.48,-2.49,0.5)); +#87605 = VECTOR('',#87606,1.); +#87606 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87607 = ORIENTED_EDGE('',*,*,#87608,.F.); +#87608 = EDGE_CURVE('',#87609,#87599,#87611,.T.); +#87609 = VERTEX_POINT('',#87610); +#87610 = CARTESIAN_POINT('',(-0.15,-2.79,0.5)); +#87611 = LINE('',#87612,#87613); +#87612 = CARTESIAN_POINT('',(-0.15,-0.71,0.5)); +#87613 = VECTOR('',#87614,1.); +#87614 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87615 = ORIENTED_EDGE('',*,*,#87616,.F.); +#87616 = EDGE_CURVE('',#87617,#87609,#87619,.T.); +#87617 = VERTEX_POINT('',#87618); +#87618 = CARTESIAN_POINT('',(0.15,-2.79,0.5)); +#87619 = LINE('',#87620,#87621); +#87620 = CARTESIAN_POINT('',(-0.63,-2.79,0.5)); +#87621 = VECTOR('',#87622,1.); +#87622 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87623 = ORIENTED_EDGE('',*,*,#87624,.F.); +#87624 = EDGE_CURVE('',#87601,#87617,#87625,.T.); +#87625 = LINE('',#87626,#87627); +#87626 = CARTESIAN_POINT('',(0.15,-0.86,0.5)); +#87627 = VECTOR('',#87628,1.); +#87628 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87629 = FACE_BOUND('',#87630,.T.); +#87630 = EDGE_LOOP('',(#87631,#87641,#87649,#87657)); +#87631 = ORIENTED_EDGE('',*,*,#87632,.F.); +#87632 = EDGE_CURVE('',#87633,#87635,#87637,.T.); +#87633 = VERTEX_POINT('',#87634); +#87634 = CARTESIAN_POINT('',(0.15,-10.41,0.5)); +#87635 = VERTEX_POINT('',#87636); +#87636 = CARTESIAN_POINT('',(-0.15,-10.41,0.5)); +#87637 = LINE('',#87638,#87639); +#87638 = CARTESIAN_POINT('',(-0.63,-10.41,0.5)); +#87639 = VECTOR('',#87640,1.); +#87640 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87641 = ORIENTED_EDGE('',*,*,#87642,.F.); +#87642 = EDGE_CURVE('',#87643,#87633,#87645,.T.); +#87643 = VERTEX_POINT('',#87644); +#87644 = CARTESIAN_POINT('',(0.15,-10.11,0.5)); +#87645 = LINE('',#87646,#87647); +#87646 = CARTESIAN_POINT('',(0.15,-4.67,0.5)); +#87647 = VECTOR('',#87648,1.); +#87648 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87649 = ORIENTED_EDGE('',*,*,#87650,.F.); +#87650 = EDGE_CURVE('',#87651,#87643,#87653,.T.); +#87651 = VERTEX_POINT('',#87652); +#87652 = CARTESIAN_POINT('',(-0.15,-10.11,0.5)); +#87653 = LINE('',#87654,#87655); +#87654 = CARTESIAN_POINT('',(-0.48,-10.11,0.5)); +#87655 = VECTOR('',#87656,1.); +#87656 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87657 = ORIENTED_EDGE('',*,*,#87658,.F.); +#87658 = EDGE_CURVE('',#87635,#87651,#87659,.T.); +#87659 = LINE('',#87660,#87661); +#87660 = CARTESIAN_POINT('',(-0.15,-4.52,0.5)); +#87661 = VECTOR('',#87662,1.); +#87662 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87663 = FACE_BOUND('',#87664,.T.); +#87664 = EDGE_LOOP('',(#87665,#87675,#87683,#87691)); +#87665 = ORIENTED_EDGE('',*,*,#87666,.T.); +#87666 = EDGE_CURVE('',#87667,#87669,#87671,.T.); +#87667 = VERTEX_POINT('',#87668); +#87668 = CARTESIAN_POINT('',(5.23,-10.41,0.5)); +#87669 = VERTEX_POINT('',#87670); +#87670 = CARTESIAN_POINT('',(5.23,-10.11,0.5)); +#87671 = LINE('',#87672,#87673); +#87672 = CARTESIAN_POINT('',(5.23,-4.52,0.5)); +#87673 = VECTOR('',#87674,1.); +#87674 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87675 = ORIENTED_EDGE('',*,*,#87676,.T.); +#87676 = EDGE_CURVE('',#87669,#87677,#87679,.T.); +#87677 = VERTEX_POINT('',#87678); +#87678 = CARTESIAN_POINT('',(4.93,-10.11,0.5)); +#87679 = LINE('',#87680,#87681); +#87680 = CARTESIAN_POINT('',(1.91,-10.11,0.5)); +#87681 = VECTOR('',#87682,1.); +#87682 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87683 = ORIENTED_EDGE('',*,*,#87684,.T.); +#87684 = EDGE_CURVE('',#87677,#87685,#87687,.T.); +#87685 = VERTEX_POINT('',#87686); +#87686 = CARTESIAN_POINT('',(4.93,-10.41,0.5)); +#87687 = LINE('',#87688,#87689); +#87688 = CARTESIAN_POINT('',(4.93,-4.67,0.5)); +#87689 = VECTOR('',#87690,1.); +#87690 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87691 = ORIENTED_EDGE('',*,*,#87692,.T.); +#87692 = EDGE_CURVE('',#87685,#87667,#87693,.T.); +#87693 = LINE('',#87694,#87695); +#87694 = CARTESIAN_POINT('',(2.06,-10.41,0.5)); +#87695 = VECTOR('',#87696,1.); +#87696 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87697 = FACE_BOUND('',#87698,.T.); +#87698 = EDGE_LOOP('',(#87699,#87709,#87717,#87725)); +#87699 = ORIENTED_EDGE('',*,*,#87700,.F.); +#87700 = EDGE_CURVE('',#87701,#87703,#87705,.T.); +#87701 = VERTEX_POINT('',#87702); +#87702 = CARTESIAN_POINT('',(0.25,0.25,0.5)); +#87703 = VERTEX_POINT('',#87704); +#87704 = CARTESIAN_POINT('',(0.25,-0.25,0.5)); +#87705 = LINE('',#87706,#87707); +#87706 = CARTESIAN_POINT('',(0.25,0.41,0.5)); +#87707 = VECTOR('',#87708,1.); +#87708 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87709 = ORIENTED_EDGE('',*,*,#87710,.F.); +#87710 = EDGE_CURVE('',#87711,#87701,#87713,.T.); +#87711 = VERTEX_POINT('',#87712); +#87712 = CARTESIAN_POINT('',(-0.25,0.25,0.5)); +#87713 = LINE('',#87714,#87715); +#87714 = CARTESIAN_POINT('',(-0.43,0.25,0.5)); +#87715 = VECTOR('',#87716,1.); +#87716 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87717 = ORIENTED_EDGE('',*,*,#87718,.F.); +#87718 = EDGE_CURVE('',#87719,#87711,#87721,.T.); +#87719 = VERTEX_POINT('',#87720); +#87720 = CARTESIAN_POINT('',(-0.25,-0.25,0.5)); +#87721 = LINE('',#87722,#87723); +#87722 = CARTESIAN_POINT('',(-0.25,0.66,0.5)); +#87723 = VECTOR('',#87724,1.); +#87724 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87725 = ORIENTED_EDGE('',*,*,#87726,.F.); +#87726 = EDGE_CURVE('',#87703,#87719,#87727,.T.); +#87727 = LINE('',#87728,#87729); +#87728 = CARTESIAN_POINT('',(-0.68,-0.25,0.5)); +#87729 = VECTOR('',#87730,1.); +#87730 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87731 = FACE_BOUND('',#87732,.T.); +#87732 = EDGE_LOOP('',(#87733,#87743,#87751,#87759)); +#87733 = ORIENTED_EDGE('',*,*,#87734,.F.); +#87734 = EDGE_CURVE('',#87735,#87737,#87739,.T.); +#87735 = VERTEX_POINT('',#87736); +#87736 = CARTESIAN_POINT('',(5.33,0.25,0.5)); +#87737 = VERTEX_POINT('',#87738); +#87738 = CARTESIAN_POINT('',(5.33,-0.25,0.5)); +#87739 = LINE('',#87740,#87741); +#87740 = CARTESIAN_POINT('',(5.33,0.41,0.5)); +#87741 = VECTOR('',#87742,1.); +#87742 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87743 = ORIENTED_EDGE('',*,*,#87744,.F.); +#87744 = EDGE_CURVE('',#87745,#87735,#87747,.T.); +#87745 = VERTEX_POINT('',#87746); +#87746 = CARTESIAN_POINT('',(4.83,0.25,0.5)); +#87747 = LINE('',#87748,#87749); +#87748 = CARTESIAN_POINT('',(2.11,0.25,0.5)); +#87749 = VECTOR('',#87750,1.); +#87750 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87751 = ORIENTED_EDGE('',*,*,#87752,.F.); +#87752 = EDGE_CURVE('',#87753,#87745,#87755,.T.); +#87753 = VERTEX_POINT('',#87754); +#87754 = CARTESIAN_POINT('',(4.83,-0.25,0.5)); +#87755 = LINE('',#87756,#87757); +#87756 = CARTESIAN_POINT('',(4.83,0.66,0.5)); +#87757 = VECTOR('',#87758,1.); +#87758 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87759 = ORIENTED_EDGE('',*,*,#87760,.F.); +#87760 = EDGE_CURVE('',#87737,#87753,#87761,.T.); +#87761 = LINE('',#87762,#87763); +#87762 = CARTESIAN_POINT('',(1.86,-0.25,0.5)); +#87763 = VECTOR('',#87764,1.); +#87764 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87765 = PLANE('',#87766); +#87766 = AXIS2_PLACEMENT_3D('',#87767,#87768,#87769); +#87767 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87768 = DIRECTION('',(0.,-0.,-1.)); +#87769 = DIRECTION('',(-1.,6.661338147751E-16,-0.)); +#87770 = ADVANCED_FACE('',(#87771),#87856,.F.); +#87771 = FACE_BOUND('',#87772,.F.); +#87772 = EDGE_LOOP('',(#87773,#87783,#87791,#87797,#87798,#87799,#87800, + #87809,#87817,#87824,#87825,#87834,#87842,#87849,#87850)); +#87773 = ORIENTED_EDGE('',*,*,#87774,.T.); +#87774 = EDGE_CURVE('',#87775,#87777,#87779,.T.); +#87775 = VERTEX_POINT('',#87776); +#87776 = CARTESIAN_POINT('',(6.19,-11.23,9.85)); +#87777 = VERTEX_POINT('',#87778); +#87778 = CARTESIAN_POINT('',(6.19,-0.519999999999,9.85)); +#87779 = LINE('',#87780,#87781); +#87780 = CARTESIAN_POINT('',(6.19,-11.23,9.85)); +#87781 = VECTOR('',#87782,1.); +#87782 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87783 = ORIENTED_EDGE('',*,*,#87784,.T.); +#87784 = EDGE_CURVE('',#87777,#87785,#87787,.T.); +#87785 = VERTEX_POINT('',#87786); +#87786 = CARTESIAN_POINT('',(6.19,-0.429999999999,9.76)); +#87787 = LINE('',#87788,#87789); +#87788 = CARTESIAN_POINT('',(6.19,-0.875,10.205)); +#87789 = VECTOR('',#87790,1.); +#87790 = DIRECTION('',(6.280369834731E-16,0.707106781187,-0.707106781187 + )); +#87791 = ORIENTED_EDGE('',*,*,#87792,.T.); +#87792 = EDGE_CURVE('',#87785,#87415,#87793,.T.); +#87793 = LINE('',#87794,#87795); +#87794 = CARTESIAN_POINT('',(6.19,-0.429999999999,10.)); +#87795 = VECTOR('',#87796,1.); +#87796 = DIRECTION('',(-0.,0.,-1.)); +#87797 = ORIENTED_EDGE('',*,*,#87414,.F.); +#87798 = ORIENTED_EDGE('',*,*,#87185,.F.); +#87799 = ORIENTED_EDGE('',*,*,#87438,.F.); +#87800 = ORIENTED_EDGE('',*,*,#87801,.T.); +#87801 = EDGE_CURVE('',#87439,#87802,#87804,.T.); +#87802 = VERTEX_POINT('',#87803); +#87803 = CARTESIAN_POINT('',(6.19,1.409983241274E-16,1.27)); +#87804 = CIRCLE('',#87805,1.27); +#87805 = AXIS2_PLACEMENT_3D('',#87806,#87807,#87808); +#87806 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#87807 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87808 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87809 = ORIENTED_EDGE('',*,*,#87810,.F.); +#87810 = EDGE_CURVE('',#87811,#87802,#87813,.T.); +#87811 = VERTEX_POINT('',#87812); +#87812 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#87813 = LINE('',#87814,#87815); +#87814 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#87815 = VECTOR('',#87816,1.); +#87816 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87817 = ORIENTED_EDGE('',*,*,#87818,.T.); +#87818 = EDGE_CURVE('',#87811,#87463,#87819,.T.); +#87819 = CIRCLE('',#87820,1.27); +#87820 = AXIS2_PLACEMENT_3D('',#87821,#87822,#87823); +#87821 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#87822 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87823 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87824 = ORIENTED_EDGE('',*,*,#87470,.F.); +#87825 = ORIENTED_EDGE('',*,*,#87826,.T.); +#87826 = EDGE_CURVE('',#87471,#87827,#87829,.T.); +#87827 = VERTEX_POINT('',#87828); +#87828 = CARTESIAN_POINT('',(6.19,-7.67,1.27)); +#87829 = CIRCLE('',#87830,1.27); +#87830 = AXIS2_PLACEMENT_3D('',#87831,#87832,#87833); +#87831 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#87832 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87833 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87834 = ORIENTED_EDGE('',*,*,#87835,.F.); +#87835 = EDGE_CURVE('',#87836,#87827,#87838,.T.); +#87836 = VERTEX_POINT('',#87837); +#87837 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#87838 = LINE('',#87839,#87840); +#87839 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#87840 = VECTOR('',#87841,1.); +#87841 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87842 = ORIENTED_EDGE('',*,*,#87843,.T.); +#87843 = EDGE_CURVE('',#87836,#87495,#87844,.T.); +#87844 = CIRCLE('',#87845,1.27); +#87845 = AXIS2_PLACEMENT_3D('',#87846,#87847,#87848); +#87846 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#87847 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87848 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87849 = ORIENTED_EDGE('',*,*,#87502,.F.); +#87850 = ORIENTED_EDGE('',*,*,#87851,.T.); +#87851 = EDGE_CURVE('',#87503,#87775,#87852,.T.); +#87852 = LINE('',#87853,#87854); +#87853 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87854 = VECTOR('',#87855,1.); +#87855 = DIRECTION('',(0.,0.,1.)); +#87856 = PLANE('',#87857); +#87857 = AXIS2_PLACEMENT_3D('',#87858,#87859,#87860); +#87858 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87859 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87860 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87861 = ADVANCED_FACE('',(#87862),#87905,.F.); +#87862 = FACE_BOUND('',#87863,.F.); +#87863 = EDGE_LOOP('',(#87864,#87874,#87882,#87890,#87896,#87897,#87898) + ); +#87864 = ORIENTED_EDGE('',*,*,#87865,.T.); +#87865 = EDGE_CURVE('',#87866,#87868,#87870,.T.); +#87866 = VERTEX_POINT('',#87867); +#87867 = CARTESIAN_POINT('',(5.690001254811,-0.669999999999,10.)); +#87868 = VERTEX_POINT('',#87869); +#87869 = CARTESIAN_POINT('',(6.04,-0.669999999999,10.)); +#87870 = LINE('',#87871,#87872); +#87871 = CARTESIAN_POINT('',(5.690001011944,-0.669999999999,10.)); +#87872 = VECTOR('',#87873,1.); +#87873 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#87874 = ORIENTED_EDGE('',*,*,#87875,.F.); +#87875 = EDGE_CURVE('',#87876,#87868,#87878,.T.); +#87876 = VERTEX_POINT('',#87877); +#87877 = CARTESIAN_POINT('',(6.04,-11.08,10.)); +#87878 = LINE('',#87879,#87880); +#87879 = CARTESIAN_POINT('',(6.04,-11.23,10.)); +#87880 = VECTOR('',#87881,1.); +#87881 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87882 = ORIENTED_EDGE('',*,*,#87883,.F.); +#87883 = EDGE_CURVE('',#87884,#87876,#87886,.T.); +#87884 = VERTEX_POINT('',#87885); +#87885 = CARTESIAN_POINT('',(-0.96,-11.08,10.)); +#87886 = LINE('',#87887,#87888); +#87887 = CARTESIAN_POINT('',(-1.11,-11.08,10.)); +#87888 = VECTOR('',#87889,1.); +#87889 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#87890 = ORIENTED_EDGE('',*,*,#87891,.F.); +#87891 = EDGE_CURVE('',#87257,#87884,#87892,.T.); +#87892 = LINE('',#87893,#87894); +#87893 = CARTESIAN_POINT('',(-0.96,1.07,10.)); +#87894 = VECTOR('',#87895,1.); +#87895 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87896 = ORIENTED_EDGE('',*,*,#87265,.F.); +#87897 = ORIENTED_EDGE('',*,*,#87225,.T.); +#87898 = ORIENTED_EDGE('',*,*,#87899,.T.); +#87899 = EDGE_CURVE('',#87226,#87866,#87900,.T.); +#87900 = CIRCLE('',#87901,1.24); +#87901 = AXIS2_PLACEMENT_3D('',#87902,#87903,#87904); +#87902 = CARTESIAN_POINT('',(5.69,0.57,10.)); +#87903 = DIRECTION('',(0.,0.,1.)); +#87904 = DIRECTION('',(-1.,2.965081991047E-08,0.)); +#87905 = PLANE('',#87906); +#87906 = AXIS2_PLACEMENT_3D('',#87907,#87908,#87909); +#87907 = CARTESIAN_POINT('',(-1.11,1.07,10.)); +#87908 = DIRECTION('',(0.,-0.,-1.)); +#87909 = DIRECTION('',(-1.,6.661338147751E-16,-0.)); +#87910 = ADVANCED_FACE('',(#87911),#87930,.F.); +#87911 = FACE_BOUND('',#87912,.F.); +#87912 = EDGE_LOOP('',(#87913,#87922,#87928,#87929)); +#87913 = ORIENTED_EDGE('',*,*,#87914,.T.); +#87914 = EDGE_CURVE('',#87234,#87915,#87917,.T.); +#87915 = VERTEX_POINT('',#87916); +#87916 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.76)); +#87917 = CIRCLE('',#87918,1.); +#87918 = AXIS2_PLACEMENT_3D('',#87919,#87920,#87921); +#87919 = CARTESIAN_POINT('',(5.69,0.57,9.76)); +#87920 = DIRECTION('',(0.,0.,1.)); +#87921 = DIRECTION('',(-1.,2.965081991047E-08,0.)); +#87922 = ORIENTED_EDGE('',*,*,#87923,.F.); +#87923 = EDGE_CURVE('',#87866,#87915,#87924,.T.); +#87924 = LINE('',#87925,#87926); +#87925 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.76)); +#87926 = VECTOR('',#87927,1.); +#87927 = DIRECTION('',(-7.155524873322E-07,0.707106781186, + -0.707106781187)); +#87928 = ORIENTED_EDGE('',*,*,#87899,.F.); +#87929 = ORIENTED_EDGE('',*,*,#87233,.T.); +#87930 = CONICAL_SURFACE('',#87931,1.,0.785398163397); +#87931 = AXIS2_PLACEMENT_3D('',#87932,#87933,#87934); +#87932 = CARTESIAN_POINT('',(5.69,0.57,9.76)); +#87933 = DIRECTION('',(0.,0.,1.)); +#87934 = DIRECTION('',(-1.,2.965081991047E-08,0.)); +#87935 = ADVANCED_FACE('',(#87936),#87948,.T.); +#87936 = FACE_BOUND('',#87937,.T.); +#87937 = EDGE_LOOP('',(#87938,#87939,#87940,#87947)); +#87938 = ORIENTED_EDGE('',*,*,#87256,.F.); +#87939 = ORIENTED_EDGE('',*,*,#87305,.T.); +#87940 = ORIENTED_EDGE('',*,*,#87941,.F.); +#87941 = EDGE_CURVE('',#87884,#87306,#87942,.T.); +#87942 = ELLIPSE('',#87943,0.212132034356,0.15); +#87943 = AXIS2_PLACEMENT_3D('',#87944,#87945,#87946); +#87944 = CARTESIAN_POINT('',(-0.96,-11.08,9.85)); +#87945 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#87946 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#87947 = ORIENTED_EDGE('',*,*,#87891,.F.); +#87948 = CYLINDRICAL_SURFACE('',#87949,0.15); +#87949 = AXIS2_PLACEMENT_3D('',#87950,#87951,#87952); +#87950 = CARTESIAN_POINT('',(-0.96,1.07,9.85)); +#87951 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87952 = DIRECTION('',(0.,0.,1.)); +#87953 = ADVANCED_FACE('',(#87954),#87965,.F.); +#87954 = FACE_BOUND('',#87955,.F.); +#87955 = EDGE_LOOP('',(#87956,#87957,#87958,#87964)); +#87956 = ORIENTED_EDGE('',*,*,#87280,.T.); +#87957 = ORIENTED_EDGE('',*,*,#87403,.T.); +#87958 = ORIENTED_EDGE('',*,*,#87959,.F.); +#87959 = EDGE_CURVE('',#87915,#87404,#87960,.T.); +#87960 = LINE('',#87961,#87962); +#87961 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,10.)); +#87962 = VECTOR('',#87963,1.); +#87963 = DIRECTION('',(-0.,0.,-1.)); +#87964 = ORIENTED_EDGE('',*,*,#87914,.F.); +#87965 = CYLINDRICAL_SURFACE('',#87966,1.); +#87966 = AXIS2_PLACEMENT_3D('',#87967,#87968,#87969); +#87967 = CARTESIAN_POINT('',(5.69,0.57,10.)); +#87968 = DIRECTION('',(0.,0.,1.)); +#87969 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87970 = ADVANCED_FACE('',(#87971),#87982,.T.); +#87971 = FACE_BOUND('',#87972,.T.); +#87972 = EDGE_LOOP('',(#87973,#87974,#87975,#87976)); +#87973 = ORIENTED_EDGE('',*,*,#87363,.F.); +#87974 = ORIENTED_EDGE('',*,*,#87372,.T.); +#87975 = ORIENTED_EDGE('',*,*,#87380,.F.); +#87976 = ORIENTED_EDGE('',*,*,#87977,.T.); +#87977 = EDGE_CURVE('',#87381,#87356,#87978,.T.); +#87978 = LINE('',#87979,#87980); +#87979 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87980 = VECTOR('',#87981,1.); +#87981 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87982 = PLANE('',#87983); +#87983 = AXIS2_PLACEMENT_3D('',#87984,#87985,#87986); +#87984 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#87985 = DIRECTION('',(-1.,1.748382715945E-16,-1.009429231697E-16)); +#87986 = DIRECTION('',(-1.748382715945E-16,-1.,-1.110223024625E-16)); +#87987 = ADVANCED_FACE('',(#87988),#87999,.T.); +#87988 = FACE_BOUND('',#87989,.T.); +#87989 = EDGE_LOOP('',(#87990,#87991,#87992,#87993)); +#87990 = ORIENTED_EDGE('',*,*,#87329,.F.); +#87991 = ORIENTED_EDGE('',*,*,#87338,.T.); +#87992 = ORIENTED_EDGE('',*,*,#87346,.F.); +#87993 = ORIENTED_EDGE('',*,*,#87994,.T.); +#87994 = EDGE_CURVE('',#87347,#87322,#87995,.T.); +#87995 = LINE('',#87996,#87997); +#87996 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87997 = VECTOR('',#87998,1.); +#87998 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87999 = PLANE('',#88000); +#88000 = AXIS2_PLACEMENT_3D('',#88001,#88002,#88003); +#88001 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#88002 = DIRECTION('',(-1.,3.49676543189E-16,8.444548485231E-29)); +#88003 = DIRECTION('',(-3.49676543189E-16,-1.,-1.110223024625E-16)); +#88004 = ADVANCED_FACE('',(#88005),#88016,.F.); +#88005 = FACE_BOUND('',#88006,.F.); +#88006 = EDGE_LOOP('',(#88007,#88008,#88014,#88015)); +#88007 = ORIENTED_EDGE('',*,*,#87313,.T.); +#88008 = ORIENTED_EDGE('',*,*,#88009,.T.); +#88009 = EDGE_CURVE('',#87306,#87775,#88010,.T.); +#88010 = LINE('',#88011,#88012); +#88011 = CARTESIAN_POINT('',(-1.11,-11.23,9.85)); +#88012 = VECTOR('',#88013,1.); +#88013 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#88014 = ORIENTED_EDGE('',*,*,#87851,.F.); +#88015 = ORIENTED_EDGE('',*,*,#87510,.F.); +#88016 = PLANE('',#88017); +#88017 = AXIS2_PLACEMENT_3D('',#88018,#88019,#88020); +#88018 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#88019 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88020 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#88021 = ADVANCED_FACE('',(#88022),#88033,.T.); +#88022 = FACE_BOUND('',#88023,.T.); +#88023 = EDGE_LOOP('',(#88024,#88025,#88026,#88027)); +#88024 = ORIENTED_EDGE('',*,*,#87792,.T.); +#88025 = ORIENTED_EDGE('',*,*,#87422,.T.); +#88026 = ORIENTED_EDGE('',*,*,#87959,.F.); +#88027 = ORIENTED_EDGE('',*,*,#88028,.T.); +#88028 = EDGE_CURVE('',#87915,#87785,#88029,.T.); +#88029 = LINE('',#88030,#88031); +#88030 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.76)); +#88031 = VECTOR('',#88032,1.); +#88032 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#88033 = PLANE('',#88034); +#88034 = AXIS2_PLACEMENT_3D('',#88035,#88036,#88037); +#88035 = CARTESIAN_POINT('',(6.19,-0.429999999999,10.)); +#88036 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#88037 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#88038 = ADVANCED_FACE('',(#88039),#88057,.T.); +#88039 = FACE_BOUND('',#88040,.T.); +#88040 = EDGE_LOOP('',(#88041,#88042,#88049,#88050)); +#88041 = ORIENTED_EDGE('',*,*,#87556,.F.); +#88042 = ORIENTED_EDGE('',*,*,#88043,.F.); +#88043 = EDGE_CURVE('',#87541,#87549,#88044,.T.); +#88044 = CIRCLE('',#88045,1.27); +#88045 = AXIS2_PLACEMENT_3D('',#88046,#88047,#88048); +#88046 = CARTESIAN_POINT('',(-0.81,-1.27,1.27)); +#88047 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88048 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88049 = ORIENTED_EDGE('',*,*,#87540,.T.); +#88050 = ORIENTED_EDGE('',*,*,#88051,.T.); +#88051 = EDGE_CURVE('',#87356,#87381,#88052,.T.); +#88052 = CIRCLE('',#88053,1.27); +#88053 = AXIS2_PLACEMENT_3D('',#88054,#88055,#88056); +#88054 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#88055 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88056 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88057 = CYLINDRICAL_SURFACE('',#88058,1.27); +#88058 = AXIS2_PLACEMENT_3D('',#88059,#88060,#88061); +#88059 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#88060 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#88061 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88062 = ADVANCED_FACE('',(#88063),#88067,.F.); +#88063 = FACE_BOUND('',#88064,.F.); +#88064 = EDGE_LOOP('',(#88065,#88066)); +#88065 = ORIENTED_EDGE('',*,*,#88043,.F.); +#88066 = ORIENTED_EDGE('',*,*,#87548,.F.); +#88067 = PLANE('',#88068); +#88068 = AXIS2_PLACEMENT_3D('',#88069,#88070,#88071); +#88069 = CARTESIAN_POINT('',(-0.81,-2.54,1.27)); +#88070 = DIRECTION('',(-1.,1.748382715945E-16,-1.009429231697E-16)); +#88071 = DIRECTION('',(-1.748382715945E-16,-1.,-1.110223024625E-16)); +#88072 = ADVANCED_FACE('',(#88073),#88091,.T.); +#88073 = FACE_BOUND('',#88074,.T.); +#88074 = EDGE_LOOP('',(#88075,#88082,#88083,#88090)); +#88075 = ORIENTED_EDGE('',*,*,#88076,.F.); +#88076 = EDGE_CURVE('',#87463,#87439,#88077,.T.); +#88077 = CIRCLE('',#88078,1.27); +#88078 = AXIS2_PLACEMENT_3D('',#88079,#88080,#88081); +#88079 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#88080 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88081 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88082 = ORIENTED_EDGE('',*,*,#87462,.F.); +#88083 = ORIENTED_EDGE('',*,*,#88084,.T.); +#88084 = EDGE_CURVE('',#87455,#87447,#88085,.T.); +#88085 = CIRCLE('',#88086,1.27); +#88086 = AXIS2_PLACEMENT_3D('',#88087,#88088,#88089); +#88087 = CARTESIAN_POINT('',(5.89,-1.27,1.27)); +#88088 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88089 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88090 = ORIENTED_EDGE('',*,*,#87446,.T.); +#88091 = CYLINDRICAL_SURFACE('',#88092,1.27); +#88092 = AXIS2_PLACEMENT_3D('',#88093,#88094,#88095); +#88093 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#88094 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#88095 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88096 = ADVANCED_FACE('',(#88097),#88101,.T.); +#88097 = FACE_BOUND('',#88098,.T.); +#88098 = EDGE_LOOP('',(#88099,#88100)); +#88099 = ORIENTED_EDGE('',*,*,#88084,.F.); +#88100 = ORIENTED_EDGE('',*,*,#87454,.F.); +#88101 = PLANE('',#88102); +#88102 = AXIS2_PLACEMENT_3D('',#88103,#88104,#88105); +#88103 = CARTESIAN_POINT('',(5.89,-2.54,1.27)); +#88104 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88105 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88106 = ADVANCED_FACE('',(#88107),#88125,.T.); +#88107 = FACE_BOUND('',#88108,.T.); +#88108 = EDGE_LOOP('',(#88109,#88110,#88117,#88118)); +#88109 = ORIENTED_EDGE('',*,*,#87533,.F.); +#88110 = ORIENTED_EDGE('',*,*,#88111,.F.); +#88111 = EDGE_CURVE('',#87518,#87526,#88112,.T.); +#88112 = CIRCLE('',#88113,1.27); +#88113 = AXIS2_PLACEMENT_3D('',#88114,#88115,#88116); +#88114 = CARTESIAN_POINT('',(-0.81,-8.94,1.27)); +#88115 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88116 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88117 = ORIENTED_EDGE('',*,*,#87517,.T.); +#88118 = ORIENTED_EDGE('',*,*,#88119,.T.); +#88119 = EDGE_CURVE('',#87322,#87347,#88120,.T.); +#88120 = CIRCLE('',#88121,1.27); +#88121 = AXIS2_PLACEMENT_3D('',#88122,#88123,#88124); +#88122 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#88123 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88124 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88125 = CYLINDRICAL_SURFACE('',#88126,1.27); +#88126 = AXIS2_PLACEMENT_3D('',#88127,#88128,#88129); +#88127 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#88128 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#88129 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88130 = ADVANCED_FACE('',(#88131),#88135,.F.); +#88131 = FACE_BOUND('',#88132,.F.); +#88132 = EDGE_LOOP('',(#88133,#88134)); +#88133 = ORIENTED_EDGE('',*,*,#88111,.F.); +#88134 = ORIENTED_EDGE('',*,*,#87525,.F.); +#88135 = PLANE('',#88136); +#88136 = AXIS2_PLACEMENT_3D('',#88137,#88138,#88139); +#88137 = CARTESIAN_POINT('',(-0.81,-10.21,1.27)); +#88138 = DIRECTION('',(-1.,3.49676543189E-16,8.444548485231E-29)); +#88139 = DIRECTION('',(-3.49676543189E-16,-1.,-1.110223024625E-16)); +#88140 = ADVANCED_FACE('',(#88141),#88159,.T.); +#88141 = FACE_BOUND('',#88142,.T.); +#88142 = EDGE_LOOP('',(#88143,#88150,#88151,#88158)); +#88143 = ORIENTED_EDGE('',*,*,#88144,.F.); +#88144 = EDGE_CURVE('',#87495,#87471,#88145,.T.); +#88145 = CIRCLE('',#88146,1.27); +#88146 = AXIS2_PLACEMENT_3D('',#88147,#88148,#88149); +#88147 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#88148 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88149 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88150 = ORIENTED_EDGE('',*,*,#87494,.F.); +#88151 = ORIENTED_EDGE('',*,*,#88152,.T.); +#88152 = EDGE_CURVE('',#87487,#87479,#88153,.T.); +#88153 = CIRCLE('',#88154,1.27); +#88154 = AXIS2_PLACEMENT_3D('',#88155,#88156,#88157); +#88155 = CARTESIAN_POINT('',(5.89,-8.94,1.27)); +#88156 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88157 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88158 = ORIENTED_EDGE('',*,*,#87478,.T.); +#88159 = CYLINDRICAL_SURFACE('',#88160,1.27); +#88160 = AXIS2_PLACEMENT_3D('',#88161,#88162,#88163); +#88161 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#88162 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#88163 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88164 = ADVANCED_FACE('',(#88165),#88169,.T.); +#88165 = FACE_BOUND('',#88166,.T.); +#88166 = EDGE_LOOP('',(#88167,#88168)); +#88167 = ORIENTED_EDGE('',*,*,#88152,.F.); +#88168 = ORIENTED_EDGE('',*,*,#87486,.F.); +#88169 = PLANE('',#88170); +#88170 = AXIS2_PLACEMENT_3D('',#88171,#88172,#88173); +#88171 = CARTESIAN_POINT('',(5.89,-10.21,1.27)); +#88172 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88173 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88174 = ADVANCED_FACE('',(#88175),#88200,.F.); +#88175 = FACE_BOUND('',#88176,.F.); +#88176 = EDGE_LOOP('',(#88177,#88178,#88186,#88194)); +#88177 = ORIENTED_EDGE('',*,*,#87564,.T.); +#88178 = ORIENTED_EDGE('',*,*,#88179,.T.); +#88179 = EDGE_CURVE('',#87567,#88180,#88182,.T.); +#88180 = VERTEX_POINT('',#88181); +#88181 = CARTESIAN_POINT('',(4.93,-2.79,-3.4)); +#88182 = LINE('',#88183,#88184); +#88183 = CARTESIAN_POINT('',(4.93,-2.79,0.6)); +#88184 = VECTOR('',#88185,1.); +#88185 = DIRECTION('',(0.,0.,-1.)); +#88186 = ORIENTED_EDGE('',*,*,#88187,.T.); +#88187 = EDGE_CURVE('',#88180,#88188,#88190,.T.); +#88188 = VERTEX_POINT('',#88189); +#88189 = CARTESIAN_POINT('',(4.93,-2.49,-3.4)); +#88190 = LINE('',#88191,#88192); +#88191 = CARTESIAN_POINT('',(4.93,-2.79,-3.4)); +#88192 = VECTOR('',#88193,1.); +#88193 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88194 = ORIENTED_EDGE('',*,*,#88195,.F.); +#88195 = EDGE_CURVE('',#87565,#88188,#88196,.T.); +#88196 = LINE('',#88197,#88198); +#88197 = CARTESIAN_POINT('',(4.93,-2.49,0.6)); +#88198 = VECTOR('',#88199,1.); +#88199 = DIRECTION('',(0.,0.,-1.)); +#88200 = PLANE('',#88201); +#88201 = AXIS2_PLACEMENT_3D('',#88202,#88203,#88204); +#88202 = CARTESIAN_POINT('',(4.93,-2.79,0.6)); +#88203 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88204 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88205 = ADVANCED_FACE('',(#88206),#88224,.F.); +#88206 = FACE_BOUND('',#88207,.F.); +#88207 = EDGE_LOOP('',(#88208,#88209,#88210,#88218)); +#88208 = ORIENTED_EDGE('',*,*,#87590,.T.); +#88209 = ORIENTED_EDGE('',*,*,#88195,.T.); +#88210 = ORIENTED_EDGE('',*,*,#88211,.T.); +#88211 = EDGE_CURVE('',#88188,#88212,#88214,.T.); +#88212 = VERTEX_POINT('',#88213); +#88213 = CARTESIAN_POINT('',(5.23,-2.49,-3.4)); +#88214 = LINE('',#88215,#88216); +#88215 = CARTESIAN_POINT('',(4.93,-2.49,-3.4)); +#88216 = VECTOR('',#88217,1.); +#88217 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88218 = ORIENTED_EDGE('',*,*,#88219,.F.); +#88219 = EDGE_CURVE('',#87583,#88212,#88220,.T.); +#88220 = LINE('',#88221,#88222); +#88221 = CARTESIAN_POINT('',(5.23,-2.49,0.6)); +#88222 = VECTOR('',#88223,1.); +#88223 = DIRECTION('',(0.,0.,-1.)); +#88224 = PLANE('',#88225); +#88225 = AXIS2_PLACEMENT_3D('',#88226,#88227,#88228); +#88226 = CARTESIAN_POINT('',(4.93,-2.49,0.6)); +#88227 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88228 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88229 = ADVANCED_FACE('',(#88230),#88248,.F.); +#88230 = FACE_BOUND('',#88231,.F.); +#88231 = EDGE_LOOP('',(#88232,#88233,#88234,#88242)); +#88232 = ORIENTED_EDGE('',*,*,#87582,.T.); +#88233 = ORIENTED_EDGE('',*,*,#88219,.T.); +#88234 = ORIENTED_EDGE('',*,*,#88235,.T.); +#88235 = EDGE_CURVE('',#88212,#88236,#88238,.T.); +#88236 = VERTEX_POINT('',#88237); +#88237 = CARTESIAN_POINT('',(5.23,-2.79,-3.4)); +#88238 = LINE('',#88239,#88240); +#88239 = CARTESIAN_POINT('',(5.23,-2.49,-3.4)); +#88240 = VECTOR('',#88241,1.); +#88241 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88242 = ORIENTED_EDGE('',*,*,#88243,.F.); +#88243 = EDGE_CURVE('',#87575,#88236,#88244,.T.); +#88244 = LINE('',#88245,#88246); +#88245 = CARTESIAN_POINT('',(5.23,-2.79,0.6)); +#88246 = VECTOR('',#88247,1.); +#88247 = DIRECTION('',(0.,0.,-1.)); +#88248 = PLANE('',#88249); +#88249 = AXIS2_PLACEMENT_3D('',#88250,#88251,#88252); +#88250 = CARTESIAN_POINT('',(5.23,-2.49,0.6)); +#88251 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88252 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88253 = ADVANCED_FACE('',(#88254),#88265,.F.); +#88254 = FACE_BOUND('',#88255,.F.); +#88255 = EDGE_LOOP('',(#88256,#88257,#88258,#88264)); +#88256 = ORIENTED_EDGE('',*,*,#87574,.T.); +#88257 = ORIENTED_EDGE('',*,*,#88243,.T.); +#88258 = ORIENTED_EDGE('',*,*,#88259,.T.); +#88259 = EDGE_CURVE('',#88236,#88180,#88260,.T.); +#88260 = LINE('',#88261,#88262); +#88261 = CARTESIAN_POINT('',(5.23,-2.79,-3.4)); +#88262 = VECTOR('',#88263,1.); +#88263 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88264 = ORIENTED_EDGE('',*,*,#88179,.F.); +#88265 = PLANE('',#88266); +#88266 = AXIS2_PLACEMENT_3D('',#88267,#88268,#88269); +#88267 = CARTESIAN_POINT('',(5.23,-2.79,0.6)); +#88268 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88269 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88270 = ADVANCED_FACE('',(#88271),#88296,.T.); +#88271 = FACE_BOUND('',#88272,.T.); +#88272 = EDGE_LOOP('',(#88273,#88274,#88282,#88290)); +#88273 = ORIENTED_EDGE('',*,*,#87598,.T.); +#88274 = ORIENTED_EDGE('',*,*,#88275,.T.); +#88275 = EDGE_CURVE('',#87601,#88276,#88278,.T.); +#88276 = VERTEX_POINT('',#88277); +#88277 = CARTESIAN_POINT('',(0.15,-2.49,-3.4)); +#88278 = LINE('',#88279,#88280); +#88279 = CARTESIAN_POINT('',(0.15,-2.49,0.6)); +#88280 = VECTOR('',#88281,1.); +#88281 = DIRECTION('',(0.,0.,-1.)); +#88282 = ORIENTED_EDGE('',*,*,#88283,.T.); +#88283 = EDGE_CURVE('',#88276,#88284,#88286,.T.); +#88284 = VERTEX_POINT('',#88285); +#88285 = CARTESIAN_POINT('',(-0.15,-2.49,-3.4)); +#88286 = LINE('',#88287,#88288); +#88287 = CARTESIAN_POINT('',(0.15,-2.49,-3.4)); +#88288 = VECTOR('',#88289,1.); +#88289 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88290 = ORIENTED_EDGE('',*,*,#88291,.F.); +#88291 = EDGE_CURVE('',#87599,#88284,#88292,.T.); +#88292 = LINE('',#88293,#88294); +#88293 = CARTESIAN_POINT('',(-0.15,-2.49,0.6)); +#88294 = VECTOR('',#88295,1.); +#88295 = DIRECTION('',(0.,0.,-1.)); +#88296 = PLANE('',#88297); +#88297 = AXIS2_PLACEMENT_3D('',#88298,#88299,#88300); +#88298 = CARTESIAN_POINT('',(0.15,-2.49,0.6)); +#88299 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88300 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88301 = ADVANCED_FACE('',(#88302),#88320,.T.); +#88302 = FACE_BOUND('',#88303,.T.); +#88303 = EDGE_LOOP('',(#88304,#88305,#88313,#88319)); +#88304 = ORIENTED_EDGE('',*,*,#87624,.T.); +#88305 = ORIENTED_EDGE('',*,*,#88306,.T.); +#88306 = EDGE_CURVE('',#87617,#88307,#88309,.T.); +#88307 = VERTEX_POINT('',#88308); +#88308 = CARTESIAN_POINT('',(0.15,-2.79,-3.4)); +#88309 = LINE('',#88310,#88311); +#88310 = CARTESIAN_POINT('',(0.15,-2.79,0.6)); +#88311 = VECTOR('',#88312,1.); +#88312 = DIRECTION('',(0.,0.,-1.)); +#88313 = ORIENTED_EDGE('',*,*,#88314,.T.); +#88314 = EDGE_CURVE('',#88307,#88276,#88315,.T.); +#88315 = LINE('',#88316,#88317); +#88316 = CARTESIAN_POINT('',(0.15,-2.79,-3.4)); +#88317 = VECTOR('',#88318,1.); +#88318 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88319 = ORIENTED_EDGE('',*,*,#88275,.F.); +#88320 = PLANE('',#88321); +#88321 = AXIS2_PLACEMENT_3D('',#88322,#88323,#88324); +#88322 = CARTESIAN_POINT('',(0.15,-2.79,0.6)); +#88323 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88324 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88325 = ADVANCED_FACE('',(#88326),#88344,.T.); +#88326 = FACE_BOUND('',#88327,.T.); +#88327 = EDGE_LOOP('',(#88328,#88329,#88337,#88343)); +#88328 = ORIENTED_EDGE('',*,*,#87616,.T.); +#88329 = ORIENTED_EDGE('',*,*,#88330,.T.); +#88330 = EDGE_CURVE('',#87609,#88331,#88333,.T.); +#88331 = VERTEX_POINT('',#88332); +#88332 = CARTESIAN_POINT('',(-0.15,-2.79,-3.4)); +#88333 = LINE('',#88334,#88335); +#88334 = CARTESIAN_POINT('',(-0.15,-2.79,0.6)); +#88335 = VECTOR('',#88336,1.); +#88336 = DIRECTION('',(0.,0.,-1.)); +#88337 = ORIENTED_EDGE('',*,*,#88338,.T.); +#88338 = EDGE_CURVE('',#88331,#88307,#88339,.T.); +#88339 = LINE('',#88340,#88341); +#88340 = CARTESIAN_POINT('',(-0.15,-2.79,-3.4)); +#88341 = VECTOR('',#88342,1.); +#88342 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88343 = ORIENTED_EDGE('',*,*,#88306,.F.); +#88344 = PLANE('',#88345); +#88345 = AXIS2_PLACEMENT_3D('',#88346,#88347,#88348); +#88346 = CARTESIAN_POINT('',(-0.15,-2.79,0.6)); +#88347 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88348 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88349 = ADVANCED_FACE('',(#88350),#88361,.T.); +#88350 = FACE_BOUND('',#88351,.T.); +#88351 = EDGE_LOOP('',(#88352,#88353,#88354,#88360)); +#88352 = ORIENTED_EDGE('',*,*,#87608,.T.); +#88353 = ORIENTED_EDGE('',*,*,#88291,.T.); +#88354 = ORIENTED_EDGE('',*,*,#88355,.T.); +#88355 = EDGE_CURVE('',#88284,#88331,#88356,.T.); +#88356 = LINE('',#88357,#88358); +#88357 = CARTESIAN_POINT('',(-0.15,-2.49,-3.4)); +#88358 = VECTOR('',#88359,1.); +#88359 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88360 = ORIENTED_EDGE('',*,*,#88330,.F.); +#88361 = PLANE('',#88362); +#88362 = AXIS2_PLACEMENT_3D('',#88363,#88364,#88365); +#88363 = CARTESIAN_POINT('',(-0.15,-2.49,0.6)); +#88364 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88365 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88366 = ADVANCED_FACE('',(#88367),#88392,.T.); +#88367 = FACE_BOUND('',#88368,.T.); +#88368 = EDGE_LOOP('',(#88369,#88370,#88378,#88386)); +#88369 = ORIENTED_EDGE('',*,*,#87632,.T.); +#88370 = ORIENTED_EDGE('',*,*,#88371,.T.); +#88371 = EDGE_CURVE('',#87635,#88372,#88374,.T.); +#88372 = VERTEX_POINT('',#88373); +#88373 = CARTESIAN_POINT('',(-0.15,-10.41,-3.4)); +#88374 = LINE('',#88375,#88376); +#88375 = CARTESIAN_POINT('',(-0.15,-10.41,0.6)); +#88376 = VECTOR('',#88377,1.); +#88377 = DIRECTION('',(0.,0.,-1.)); +#88378 = ORIENTED_EDGE('',*,*,#88379,.T.); +#88379 = EDGE_CURVE('',#88372,#88380,#88382,.T.); +#88380 = VERTEX_POINT('',#88381); +#88381 = CARTESIAN_POINT('',(0.15,-10.41,-3.4)); +#88382 = LINE('',#88383,#88384); +#88383 = CARTESIAN_POINT('',(-0.15,-10.41,-3.4)); +#88384 = VECTOR('',#88385,1.); +#88385 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88386 = ORIENTED_EDGE('',*,*,#88387,.F.); +#88387 = EDGE_CURVE('',#87633,#88380,#88388,.T.); +#88388 = LINE('',#88389,#88390); +#88389 = CARTESIAN_POINT('',(0.15,-10.41,0.6)); +#88390 = VECTOR('',#88391,1.); +#88391 = DIRECTION('',(0.,0.,-1.)); +#88392 = PLANE('',#88393); +#88393 = AXIS2_PLACEMENT_3D('',#88394,#88395,#88396); +#88394 = CARTESIAN_POINT('',(-0.15,-10.41,0.6)); +#88395 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88396 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88397 = ADVANCED_FACE('',(#88398),#88416,.T.); +#88398 = FACE_BOUND('',#88399,.T.); +#88399 = EDGE_LOOP('',(#88400,#88401,#88409,#88415)); +#88400 = ORIENTED_EDGE('',*,*,#87658,.T.); +#88401 = ORIENTED_EDGE('',*,*,#88402,.T.); +#88402 = EDGE_CURVE('',#87651,#88403,#88405,.T.); +#88403 = VERTEX_POINT('',#88404); +#88404 = CARTESIAN_POINT('',(-0.15,-10.11,-3.4)); +#88405 = LINE('',#88406,#88407); +#88406 = CARTESIAN_POINT('',(-0.15,-10.11,0.6)); +#88407 = VECTOR('',#88408,1.); +#88408 = DIRECTION('',(0.,0.,-1.)); +#88409 = ORIENTED_EDGE('',*,*,#88410,.T.); +#88410 = EDGE_CURVE('',#88403,#88372,#88411,.T.); +#88411 = LINE('',#88412,#88413); +#88412 = CARTESIAN_POINT('',(-0.15,-10.11,-3.4)); +#88413 = VECTOR('',#88414,1.); +#88414 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88415 = ORIENTED_EDGE('',*,*,#88371,.F.); +#88416 = PLANE('',#88417); +#88417 = AXIS2_PLACEMENT_3D('',#88418,#88419,#88420); +#88418 = CARTESIAN_POINT('',(-0.15,-10.11,0.6)); +#88419 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88420 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88421 = ADVANCED_FACE('',(#88422),#88440,.T.); +#88422 = FACE_BOUND('',#88423,.T.); +#88423 = EDGE_LOOP('',(#88424,#88425,#88433,#88439)); +#88424 = ORIENTED_EDGE('',*,*,#87650,.T.); +#88425 = ORIENTED_EDGE('',*,*,#88426,.T.); +#88426 = EDGE_CURVE('',#87643,#88427,#88429,.T.); +#88427 = VERTEX_POINT('',#88428); +#88428 = CARTESIAN_POINT('',(0.15,-10.11,-3.4)); +#88429 = LINE('',#88430,#88431); +#88430 = CARTESIAN_POINT('',(0.15,-10.11,0.6)); +#88431 = VECTOR('',#88432,1.); +#88432 = DIRECTION('',(0.,0.,-1.)); +#88433 = ORIENTED_EDGE('',*,*,#88434,.T.); +#88434 = EDGE_CURVE('',#88427,#88403,#88435,.T.); +#88435 = LINE('',#88436,#88437); +#88436 = CARTESIAN_POINT('',(0.15,-10.11,-3.4)); +#88437 = VECTOR('',#88438,1.); +#88438 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88439 = ORIENTED_EDGE('',*,*,#88402,.F.); +#88440 = PLANE('',#88441); +#88441 = AXIS2_PLACEMENT_3D('',#88442,#88443,#88444); +#88442 = CARTESIAN_POINT('',(0.15,-10.11,0.6)); +#88443 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88444 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88445 = ADVANCED_FACE('',(#88446),#88457,.T.); +#88446 = FACE_BOUND('',#88447,.T.); +#88447 = EDGE_LOOP('',(#88448,#88449,#88450,#88456)); +#88448 = ORIENTED_EDGE('',*,*,#87642,.T.); +#88449 = ORIENTED_EDGE('',*,*,#88387,.T.); +#88450 = ORIENTED_EDGE('',*,*,#88451,.T.); +#88451 = EDGE_CURVE('',#88380,#88427,#88452,.T.); +#88452 = LINE('',#88453,#88454); +#88453 = CARTESIAN_POINT('',(0.15,-10.41,-3.4)); +#88454 = VECTOR('',#88455,1.); +#88455 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88456 = ORIENTED_EDGE('',*,*,#88426,.F.); +#88457 = PLANE('',#88458); +#88458 = AXIS2_PLACEMENT_3D('',#88459,#88460,#88461); +#88459 = CARTESIAN_POINT('',(0.15,-10.41,0.6)); +#88460 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88461 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88462 = ADVANCED_FACE('',(#88463),#88488,.F.); +#88463 = FACE_BOUND('',#88464,.F.); +#88464 = EDGE_LOOP('',(#88465,#88466,#88474,#88482)); +#88465 = ORIENTED_EDGE('',*,*,#87666,.T.); +#88466 = ORIENTED_EDGE('',*,*,#88467,.T.); +#88467 = EDGE_CURVE('',#87669,#88468,#88470,.T.); +#88468 = VERTEX_POINT('',#88469); +#88469 = CARTESIAN_POINT('',(5.23,-10.11,-3.4)); +#88470 = LINE('',#88471,#88472); +#88471 = CARTESIAN_POINT('',(5.23,-10.11,0.6)); +#88472 = VECTOR('',#88473,1.); +#88473 = DIRECTION('',(0.,0.,-1.)); +#88474 = ORIENTED_EDGE('',*,*,#88475,.T.); +#88475 = EDGE_CURVE('',#88468,#88476,#88478,.T.); +#88476 = VERTEX_POINT('',#88477); +#88477 = CARTESIAN_POINT('',(5.23,-10.41,-3.4)); +#88478 = LINE('',#88479,#88480); +#88479 = CARTESIAN_POINT('',(5.23,-10.11,-3.4)); +#88480 = VECTOR('',#88481,1.); +#88481 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88482 = ORIENTED_EDGE('',*,*,#88483,.F.); +#88483 = EDGE_CURVE('',#87667,#88476,#88484,.T.); +#88484 = LINE('',#88485,#88486); +#88485 = CARTESIAN_POINT('',(5.23,-10.41,0.6)); +#88486 = VECTOR('',#88487,1.); +#88487 = DIRECTION('',(0.,0.,-1.)); +#88488 = PLANE('',#88489); +#88489 = AXIS2_PLACEMENT_3D('',#88490,#88491,#88492); +#88490 = CARTESIAN_POINT('',(5.23,-10.11,0.6)); +#88491 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88492 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88493 = ADVANCED_FACE('',(#88494),#88512,.F.); +#88494 = FACE_BOUND('',#88495,.F.); +#88495 = EDGE_LOOP('',(#88496,#88497,#88498,#88506)); +#88496 = ORIENTED_EDGE('',*,*,#87692,.T.); +#88497 = ORIENTED_EDGE('',*,*,#88483,.T.); +#88498 = ORIENTED_EDGE('',*,*,#88499,.T.); +#88499 = EDGE_CURVE('',#88476,#88500,#88502,.T.); +#88500 = VERTEX_POINT('',#88501); +#88501 = CARTESIAN_POINT('',(4.93,-10.41,-3.4)); +#88502 = LINE('',#88503,#88504); +#88503 = CARTESIAN_POINT('',(5.23,-10.41,-3.4)); +#88504 = VECTOR('',#88505,1.); +#88505 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88506 = ORIENTED_EDGE('',*,*,#88507,.F.); +#88507 = EDGE_CURVE('',#87685,#88500,#88508,.T.); +#88508 = LINE('',#88509,#88510); +#88509 = CARTESIAN_POINT('',(4.93,-10.41,0.6)); +#88510 = VECTOR('',#88511,1.); +#88511 = DIRECTION('',(0.,0.,-1.)); +#88512 = PLANE('',#88513); +#88513 = AXIS2_PLACEMENT_3D('',#88514,#88515,#88516); +#88514 = CARTESIAN_POINT('',(5.23,-10.41,0.6)); +#88515 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88516 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88517 = ADVANCED_FACE('',(#88518),#88536,.F.); +#88518 = FACE_BOUND('',#88519,.F.); +#88519 = EDGE_LOOP('',(#88520,#88521,#88522,#88530)); +#88520 = ORIENTED_EDGE('',*,*,#87684,.T.); +#88521 = ORIENTED_EDGE('',*,*,#88507,.T.); +#88522 = ORIENTED_EDGE('',*,*,#88523,.T.); +#88523 = EDGE_CURVE('',#88500,#88524,#88526,.T.); +#88524 = VERTEX_POINT('',#88525); +#88525 = CARTESIAN_POINT('',(4.93,-10.11,-3.4)); +#88526 = LINE('',#88527,#88528); +#88527 = CARTESIAN_POINT('',(4.93,-10.41,-3.4)); +#88528 = VECTOR('',#88529,1.); +#88529 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88530 = ORIENTED_EDGE('',*,*,#88531,.F.); +#88531 = EDGE_CURVE('',#87677,#88524,#88532,.T.); +#88532 = LINE('',#88533,#88534); +#88533 = CARTESIAN_POINT('',(4.93,-10.11,0.6)); +#88534 = VECTOR('',#88535,1.); +#88535 = DIRECTION('',(0.,0.,-1.)); +#88536 = PLANE('',#88537); +#88537 = AXIS2_PLACEMENT_3D('',#88538,#88539,#88540); +#88538 = CARTESIAN_POINT('',(4.93,-10.41,0.6)); +#88539 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88540 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88541 = ADVANCED_FACE('',(#88542),#88553,.F.); +#88542 = FACE_BOUND('',#88543,.F.); +#88543 = EDGE_LOOP('',(#88544,#88545,#88546,#88552)); +#88544 = ORIENTED_EDGE('',*,*,#87676,.T.); +#88545 = ORIENTED_EDGE('',*,*,#88531,.T.); +#88546 = ORIENTED_EDGE('',*,*,#88547,.T.); +#88547 = EDGE_CURVE('',#88524,#88468,#88548,.T.); +#88548 = LINE('',#88549,#88550); +#88549 = CARTESIAN_POINT('',(4.93,-10.11,-3.4)); +#88550 = VECTOR('',#88551,1.); +#88551 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88552 = ORIENTED_EDGE('',*,*,#88467,.F.); +#88553 = PLANE('',#88554); +#88554 = AXIS2_PLACEMENT_3D('',#88555,#88556,#88557); +#88555 = CARTESIAN_POINT('',(4.93,-10.11,0.6)); +#88556 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88557 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88558 = ADVANCED_FACE('',(#88559),#88584,.T.); +#88559 = FACE_BOUND('',#88560,.T.); +#88560 = EDGE_LOOP('',(#88561,#88562,#88570,#88578)); +#88561 = ORIENTED_EDGE('',*,*,#87700,.T.); +#88562 = ORIENTED_EDGE('',*,*,#88563,.T.); +#88563 = EDGE_CURVE('',#87703,#88564,#88566,.T.); +#88564 = VERTEX_POINT('',#88565); +#88565 = CARTESIAN_POINT('',(0.25,-0.25,-3.4)); +#88566 = LINE('',#88567,#88568); +#88567 = CARTESIAN_POINT('',(0.25,-0.25,0.6)); +#88568 = VECTOR('',#88569,1.); +#88569 = DIRECTION('',(0.,0.,-1.)); +#88570 = ORIENTED_EDGE('',*,*,#88571,.T.); +#88571 = EDGE_CURVE('',#88564,#88572,#88574,.T.); +#88572 = VERTEX_POINT('',#88573); +#88573 = CARTESIAN_POINT('',(0.25,0.25,-3.4)); +#88574 = LINE('',#88575,#88576); +#88575 = CARTESIAN_POINT('',(0.25,-0.25,-3.4)); +#88576 = VECTOR('',#88577,1.); +#88577 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88578 = ORIENTED_EDGE('',*,*,#88579,.F.); +#88579 = EDGE_CURVE('',#87701,#88572,#88580,.T.); +#88580 = LINE('',#88581,#88582); +#88581 = CARTESIAN_POINT('',(0.25,0.25,0.6)); +#88582 = VECTOR('',#88583,1.); +#88583 = DIRECTION('',(0.,0.,-1.)); +#88584 = PLANE('',#88585); +#88585 = AXIS2_PLACEMENT_3D('',#88586,#88587,#88588); +#88586 = CARTESIAN_POINT('',(0.25,-0.25,0.6)); +#88587 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88588 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88589 = ADVANCED_FACE('',(#88590),#88608,.T.); +#88590 = FACE_BOUND('',#88591,.T.); +#88591 = EDGE_LOOP('',(#88592,#88593,#88601,#88607)); +#88592 = ORIENTED_EDGE('',*,*,#87726,.T.); +#88593 = ORIENTED_EDGE('',*,*,#88594,.T.); +#88594 = EDGE_CURVE('',#87719,#88595,#88597,.T.); +#88595 = VERTEX_POINT('',#88596); +#88596 = CARTESIAN_POINT('',(-0.25,-0.25,-3.4)); +#88597 = LINE('',#88598,#88599); +#88598 = CARTESIAN_POINT('',(-0.25,-0.25,0.6)); +#88599 = VECTOR('',#88600,1.); +#88600 = DIRECTION('',(0.,0.,-1.)); +#88601 = ORIENTED_EDGE('',*,*,#88602,.T.); +#88602 = EDGE_CURVE('',#88595,#88564,#88603,.T.); +#88603 = LINE('',#88604,#88605); +#88604 = CARTESIAN_POINT('',(-0.25,-0.25,-3.4)); +#88605 = VECTOR('',#88606,1.); +#88606 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88607 = ORIENTED_EDGE('',*,*,#88563,.F.); +#88608 = PLANE('',#88609); +#88609 = AXIS2_PLACEMENT_3D('',#88610,#88611,#88612); +#88610 = CARTESIAN_POINT('',(-0.25,-0.25,0.6)); +#88611 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88612 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88613 = ADVANCED_FACE('',(#88614),#88632,.T.); +#88614 = FACE_BOUND('',#88615,.T.); +#88615 = EDGE_LOOP('',(#88616,#88617,#88625,#88631)); +#88616 = ORIENTED_EDGE('',*,*,#87718,.T.); +#88617 = ORIENTED_EDGE('',*,*,#88618,.T.); +#88618 = EDGE_CURVE('',#87711,#88619,#88621,.T.); +#88619 = VERTEX_POINT('',#88620); +#88620 = CARTESIAN_POINT('',(-0.25,0.25,-3.4)); +#88621 = LINE('',#88622,#88623); +#88622 = CARTESIAN_POINT('',(-0.25,0.25,0.6)); +#88623 = VECTOR('',#88624,1.); +#88624 = DIRECTION('',(0.,0.,-1.)); +#88625 = ORIENTED_EDGE('',*,*,#88626,.T.); +#88626 = EDGE_CURVE('',#88619,#88595,#88627,.T.); +#88627 = LINE('',#88628,#88629); +#88628 = CARTESIAN_POINT('',(-0.25,0.25,-3.4)); +#88629 = VECTOR('',#88630,1.); +#88630 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88631 = ORIENTED_EDGE('',*,*,#88594,.F.); +#88632 = PLANE('',#88633); +#88633 = AXIS2_PLACEMENT_3D('',#88634,#88635,#88636); +#88634 = CARTESIAN_POINT('',(-0.25,0.25,0.6)); +#88635 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88636 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88637 = ADVANCED_FACE('',(#88638),#88649,.T.); +#88638 = FACE_BOUND('',#88639,.T.); +#88639 = EDGE_LOOP('',(#88640,#88641,#88642,#88648)); +#88640 = ORIENTED_EDGE('',*,*,#87710,.T.); +#88641 = ORIENTED_EDGE('',*,*,#88579,.T.); +#88642 = ORIENTED_EDGE('',*,*,#88643,.T.); +#88643 = EDGE_CURVE('',#88572,#88619,#88644,.T.); +#88644 = LINE('',#88645,#88646); +#88645 = CARTESIAN_POINT('',(0.25,0.25,-3.4)); +#88646 = VECTOR('',#88647,1.); +#88647 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88648 = ORIENTED_EDGE('',*,*,#88618,.F.); +#88649 = PLANE('',#88650); +#88650 = AXIS2_PLACEMENT_3D('',#88651,#88652,#88653); +#88651 = CARTESIAN_POINT('',(0.25,0.25,0.6)); +#88652 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88653 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88654 = ADVANCED_FACE('',(#88655),#88680,.T.); +#88655 = FACE_BOUND('',#88656,.T.); +#88656 = EDGE_LOOP('',(#88657,#88658,#88666,#88674)); +#88657 = ORIENTED_EDGE('',*,*,#87734,.T.); +#88658 = ORIENTED_EDGE('',*,*,#88659,.T.); +#88659 = EDGE_CURVE('',#87737,#88660,#88662,.T.); +#88660 = VERTEX_POINT('',#88661); +#88661 = CARTESIAN_POINT('',(5.33,-0.25,-3.4)); +#88662 = LINE('',#88663,#88664); +#88663 = CARTESIAN_POINT('',(5.33,-0.25,0.6)); +#88664 = VECTOR('',#88665,1.); +#88665 = DIRECTION('',(0.,0.,-1.)); +#88666 = ORIENTED_EDGE('',*,*,#88667,.T.); +#88667 = EDGE_CURVE('',#88660,#88668,#88670,.T.); +#88668 = VERTEX_POINT('',#88669); +#88669 = CARTESIAN_POINT('',(5.33,0.25,-3.4)); +#88670 = LINE('',#88671,#88672); +#88671 = CARTESIAN_POINT('',(5.33,-0.25,-3.4)); +#88672 = VECTOR('',#88673,1.); +#88673 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88674 = ORIENTED_EDGE('',*,*,#88675,.F.); +#88675 = EDGE_CURVE('',#87735,#88668,#88676,.T.); +#88676 = LINE('',#88677,#88678); +#88677 = CARTESIAN_POINT('',(5.33,0.25,0.6)); +#88678 = VECTOR('',#88679,1.); +#88679 = DIRECTION('',(0.,0.,-1.)); +#88680 = PLANE('',#88681); +#88681 = AXIS2_PLACEMENT_3D('',#88682,#88683,#88684); +#88682 = CARTESIAN_POINT('',(5.33,-0.25,0.6)); +#88683 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88684 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88685 = ADVANCED_FACE('',(#88686),#88704,.T.); +#88686 = FACE_BOUND('',#88687,.T.); +#88687 = EDGE_LOOP('',(#88688,#88689,#88697,#88703)); +#88688 = ORIENTED_EDGE('',*,*,#87760,.T.); +#88689 = ORIENTED_EDGE('',*,*,#88690,.T.); +#88690 = EDGE_CURVE('',#87753,#88691,#88693,.T.); +#88691 = VERTEX_POINT('',#88692); +#88692 = CARTESIAN_POINT('',(4.83,-0.25,-3.4)); +#88693 = LINE('',#88694,#88695); +#88694 = CARTESIAN_POINT('',(4.83,-0.25,0.6)); +#88695 = VECTOR('',#88696,1.); +#88696 = DIRECTION('',(0.,0.,-1.)); +#88697 = ORIENTED_EDGE('',*,*,#88698,.T.); +#88698 = EDGE_CURVE('',#88691,#88660,#88699,.T.); +#88699 = LINE('',#88700,#88701); +#88700 = CARTESIAN_POINT('',(4.83,-0.25,-3.4)); +#88701 = VECTOR('',#88702,1.); +#88702 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88703 = ORIENTED_EDGE('',*,*,#88659,.F.); +#88704 = PLANE('',#88705); +#88705 = AXIS2_PLACEMENT_3D('',#88706,#88707,#88708); +#88706 = CARTESIAN_POINT('',(4.83,-0.25,0.6)); +#88707 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88708 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88709 = ADVANCED_FACE('',(#88710),#88728,.T.); +#88710 = FACE_BOUND('',#88711,.T.); +#88711 = EDGE_LOOP('',(#88712,#88713,#88721,#88727)); +#88712 = ORIENTED_EDGE('',*,*,#87752,.T.); +#88713 = ORIENTED_EDGE('',*,*,#88714,.T.); +#88714 = EDGE_CURVE('',#87745,#88715,#88717,.T.); +#88715 = VERTEX_POINT('',#88716); +#88716 = CARTESIAN_POINT('',(4.83,0.25,-3.4)); +#88717 = LINE('',#88718,#88719); +#88718 = CARTESIAN_POINT('',(4.83,0.25,0.6)); +#88719 = VECTOR('',#88720,1.); +#88720 = DIRECTION('',(0.,0.,-1.)); +#88721 = ORIENTED_EDGE('',*,*,#88722,.T.); +#88722 = EDGE_CURVE('',#88715,#88691,#88723,.T.); +#88723 = LINE('',#88724,#88725); +#88724 = CARTESIAN_POINT('',(4.83,0.25,-3.4)); +#88725 = VECTOR('',#88726,1.); +#88726 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88727 = ORIENTED_EDGE('',*,*,#88690,.F.); +#88728 = PLANE('',#88729); +#88729 = AXIS2_PLACEMENT_3D('',#88730,#88731,#88732); +#88730 = CARTESIAN_POINT('',(4.83,0.25,0.6)); +#88731 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88732 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88733 = ADVANCED_FACE('',(#88734),#88745,.T.); +#88734 = FACE_BOUND('',#88735,.T.); +#88735 = EDGE_LOOP('',(#88736,#88737,#88738,#88744)); +#88736 = ORIENTED_EDGE('',*,*,#87744,.T.); +#88737 = ORIENTED_EDGE('',*,*,#88675,.T.); +#88738 = ORIENTED_EDGE('',*,*,#88739,.T.); +#88739 = EDGE_CURVE('',#88668,#88715,#88740,.T.); +#88740 = LINE('',#88741,#88742); +#88741 = CARTESIAN_POINT('',(5.33,0.25,-3.4)); +#88742 = VECTOR('',#88743,1.); +#88743 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88744 = ORIENTED_EDGE('',*,*,#88714,.F.); +#88745 = PLANE('',#88746); +#88746 = AXIS2_PLACEMENT_3D('',#88747,#88748,#88749); +#88747 = CARTESIAN_POINT('',(5.33,0.25,0.6)); +#88748 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88749 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88750 = ADVANCED_FACE('',(#88751),#88769,.T.); +#88751 = FACE_BOUND('',#88752,.T.); +#88752 = EDGE_LOOP('',(#88753,#88760,#88761,#88768)); +#88753 = ORIENTED_EDGE('',*,*,#88754,.T.); +#88754 = EDGE_CURVE('',#87876,#87775,#88755,.T.); +#88755 = ELLIPSE('',#88756,0.212132034356,0.15); +#88756 = AXIS2_PLACEMENT_3D('',#88757,#88758,#88759); +#88757 = CARTESIAN_POINT('',(6.04,-11.08,9.85)); +#88758 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#88759 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#88760 = ORIENTED_EDGE('',*,*,#87774,.T.); +#88761 = ORIENTED_EDGE('',*,*,#88762,.F.); +#88762 = EDGE_CURVE('',#87868,#87777,#88763,.T.); +#88763 = ELLIPSE('',#88764,0.212132034356,0.15); +#88764 = AXIS2_PLACEMENT_3D('',#88765,#88766,#88767); +#88765 = CARTESIAN_POINT('',(6.04,-0.519999999999,9.85)); +#88766 = DIRECTION('',(7.716601596997E-17,0.707106781187,0.707106781187) + ); +#88767 = DIRECTION('',(1.178907950976E-15,0.707106781187,-0.707106781187 + )); +#88768 = ORIENTED_EDGE('',*,*,#87875,.F.); +#88769 = CYLINDRICAL_SURFACE('',#88770,0.15); +#88770 = AXIS2_PLACEMENT_3D('',#88771,#88772,#88773); +#88771 = CARTESIAN_POINT('',(6.04,-11.23,9.85)); +#88772 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88773 = DIRECTION('',(0.,-0.,1.)); +#88774 = ADVANCED_FACE('',(#88775),#88786,.F.); +#88775 = FACE_BOUND('',#88776,.F.); +#88776 = EDGE_LOOP('',(#88777,#88778,#88779,#88780)); +#88777 = ORIENTED_EDGE('',*,*,#87843,.F.); +#88778 = ORIENTED_EDGE('',*,*,#87835,.T.); +#88779 = ORIENTED_EDGE('',*,*,#87826,.F.); +#88780 = ORIENTED_EDGE('',*,*,#88781,.F.); +#88781 = EDGE_CURVE('',#87495,#87471,#88782,.T.); +#88782 = LINE('',#88783,#88784); +#88783 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#88784 = VECTOR('',#88785,1.); +#88785 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88786 = PLANE('',#88787); +#88787 = AXIS2_PLACEMENT_3D('',#88788,#88789,#88790); +#88788 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#88789 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88790 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88791 = ADVANCED_FACE('',(#88792),#88803,.F.); +#88792 = FACE_BOUND('',#88793,.F.); +#88793 = EDGE_LOOP('',(#88794,#88795,#88796,#88797)); +#88794 = ORIENTED_EDGE('',*,*,#87818,.F.); +#88795 = ORIENTED_EDGE('',*,*,#87810,.T.); +#88796 = ORIENTED_EDGE('',*,*,#87801,.F.); +#88797 = ORIENTED_EDGE('',*,*,#88798,.F.); +#88798 = EDGE_CURVE('',#87463,#87439,#88799,.T.); +#88799 = LINE('',#88800,#88801); +#88800 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#88801 = VECTOR('',#88802,1.); +#88802 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88803 = PLANE('',#88804); +#88804 = AXIS2_PLACEMENT_3D('',#88805,#88806,#88807); +#88805 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#88806 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88807 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88808 = ADVANCED_FACE('',(#88809),#88816,.F.); +#88809 = FACE_BOUND('',#88810,.T.); +#88810 = EDGE_LOOP('',(#88811,#88812,#88813,#88814,#88815)); +#88811 = ORIENTED_EDGE('',*,*,#87865,.T.); +#88812 = ORIENTED_EDGE('',*,*,#88762,.T.); +#88813 = ORIENTED_EDGE('',*,*,#87784,.T.); +#88814 = ORIENTED_EDGE('',*,*,#88028,.F.); +#88815 = ORIENTED_EDGE('',*,*,#87923,.F.); +#88816 = PLANE('',#88817); +#88817 = AXIS2_PLACEMENT_3D('',#88818,#88819,#88820); +#88818 = CARTESIAN_POINT('',(5.690001011944,-0.549999999999,9.88)); +#88819 = DIRECTION('',(-7.716601596997E-17,-0.707106781187, + -0.707106781187)); +#88820 = DIRECTION('',(-1.,1.100757644008E-16,-9.465380617391E-19)); +#88821 = ADVANCED_FACE('',(#88822),#88828,.T.); +#88822 = FACE_BOUND('',#88823,.T.); +#88823 = EDGE_LOOP('',(#88824,#88825,#88826,#88827)); +#88824 = ORIENTED_EDGE('',*,*,#87941,.T.); +#88825 = ORIENTED_EDGE('',*,*,#88009,.T.); +#88826 = ORIENTED_EDGE('',*,*,#88754,.F.); +#88827 = ORIENTED_EDGE('',*,*,#87883,.F.); +#88828 = CYLINDRICAL_SURFACE('',#88829,0.15); +#88829 = AXIS2_PLACEMENT_3D('',#88830,#88831,#88832); +#88830 = CARTESIAN_POINT('',(-1.11,-11.08,9.85)); +#88831 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#88832 = DIRECTION('',(0.,0.,1.)); +#88833 = ADVANCED_FACE('',(#88834),#88838,.T.); +#88834 = FACE_BOUND('',#88835,.T.); +#88835 = EDGE_LOOP('',(#88836,#88837)); +#88836 = ORIENTED_EDGE('',*,*,#88051,.F.); +#88837 = ORIENTED_EDGE('',*,*,#87977,.F.); +#88838 = PLANE('',#88839); +#88839 = AXIS2_PLACEMENT_3D('',#88840,#88841,#88842); +#88840 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#88841 = DIRECTION('',(-1.,1.748382715945E-16,-1.009429231697E-16)); +#88842 = DIRECTION('',(-1.748382715945E-16,-1.,-1.110223024625E-16)); +#88843 = ADVANCED_FACE('',(#88844),#88848,.T.); +#88844 = FACE_BOUND('',#88845,.T.); +#88845 = EDGE_LOOP('',(#88846,#88847)); +#88846 = ORIENTED_EDGE('',*,*,#88119,.F.); +#88847 = ORIENTED_EDGE('',*,*,#87994,.F.); +#88848 = PLANE('',#88849); +#88849 = AXIS2_PLACEMENT_3D('',#88850,#88851,#88852); +#88850 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#88851 = DIRECTION('',(-1.,3.49676543189E-16,8.444548485231E-29)); +#88852 = DIRECTION('',(-3.49676543189E-16,-1.,-1.110223024625E-16)); +#88853 = ADVANCED_FACE('',(#88854),#88858,.F.); +#88854 = FACE_BOUND('',#88855,.F.); +#88855 = EDGE_LOOP('',(#88856,#88857)); +#88856 = ORIENTED_EDGE('',*,*,#88076,.F.); +#88857 = ORIENTED_EDGE('',*,*,#88798,.T.); +#88858 = PLANE('',#88859); +#88859 = AXIS2_PLACEMENT_3D('',#88860,#88861,#88862); +#88860 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#88861 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88862 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88863 = ADVANCED_FACE('',(#88864),#88868,.F.); +#88864 = FACE_BOUND('',#88865,.F.); +#88865 = EDGE_LOOP('',(#88866,#88867)); +#88866 = ORIENTED_EDGE('',*,*,#88144,.F.); +#88867 = ORIENTED_EDGE('',*,*,#88781,.T.); +#88868 = PLANE('',#88869); +#88869 = AXIS2_PLACEMENT_3D('',#88870,#88871,#88872); +#88870 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#88871 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88872 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88873 = ADVANCED_FACE('',(#88874),#88880,.F.); +#88874 = FACE_BOUND('',#88875,.T.); +#88875 = EDGE_LOOP('',(#88876,#88877,#88878,#88879)); +#88876 = ORIENTED_EDGE('',*,*,#88187,.T.); +#88877 = ORIENTED_EDGE('',*,*,#88211,.T.); +#88878 = ORIENTED_EDGE('',*,*,#88235,.T.); +#88879 = ORIENTED_EDGE('',*,*,#88259,.T.); +#88880 = PLANE('',#88881); +#88881 = AXIS2_PLACEMENT_3D('',#88882,#88883,#88884); +#88882 = CARTESIAN_POINT('',(4.93,-2.79,-3.4)); +#88883 = DIRECTION('',(0.,0.,1.)); +#88884 = DIRECTION('',(1.,-3.330669073875E-16,0.)); +#88885 = ADVANCED_FACE('',(#88886),#88892,.T.); +#88886 = FACE_BOUND('',#88887,.F.); +#88887 = EDGE_LOOP('',(#88888,#88889,#88890,#88891)); +#88888 = ORIENTED_EDGE('',*,*,#88314,.T.); +#88889 = ORIENTED_EDGE('',*,*,#88283,.T.); +#88890 = ORIENTED_EDGE('',*,*,#88355,.T.); +#88891 = ORIENTED_EDGE('',*,*,#88338,.T.); +#88892 = PLANE('',#88893); +#88893 = AXIS2_PLACEMENT_3D('',#88894,#88895,#88896); +#88894 = CARTESIAN_POINT('',(0.15,-2.79,-3.4)); +#88895 = DIRECTION('',(0.,0.,-1.)); +#88896 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#88897 = ADVANCED_FACE('',(#88898),#88904,.T.); +#88898 = FACE_BOUND('',#88899,.F.); +#88899 = EDGE_LOOP('',(#88900,#88901,#88902,#88903)); +#88900 = ORIENTED_EDGE('',*,*,#88451,.T.); +#88901 = ORIENTED_EDGE('',*,*,#88434,.T.); +#88902 = ORIENTED_EDGE('',*,*,#88410,.T.); +#88903 = ORIENTED_EDGE('',*,*,#88379,.T.); +#88904 = PLANE('',#88905); +#88905 = AXIS2_PLACEMENT_3D('',#88906,#88907,#88908); +#88906 = CARTESIAN_POINT('',(0.15,-10.41,-3.4)); +#88907 = DIRECTION('',(0.,0.,-1.)); +#88908 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#88909 = ADVANCED_FACE('',(#88910),#88916,.F.); +#88910 = FACE_BOUND('',#88911,.T.); +#88911 = EDGE_LOOP('',(#88912,#88913,#88914,#88915)); +#88912 = ORIENTED_EDGE('',*,*,#88475,.T.); +#88913 = ORIENTED_EDGE('',*,*,#88499,.T.); +#88914 = ORIENTED_EDGE('',*,*,#88523,.T.); +#88915 = ORIENTED_EDGE('',*,*,#88547,.T.); +#88916 = PLANE('',#88917); +#88917 = AXIS2_PLACEMENT_3D('',#88918,#88919,#88920); +#88918 = CARTESIAN_POINT('',(5.23,-10.11,-3.4)); +#88919 = DIRECTION('',(0.,0.,1.)); +#88920 = DIRECTION('',(1.,-3.330669073875E-16,0.)); +#88921 = ADVANCED_FACE('',(#88922),#88928,.T.); +#88922 = FACE_BOUND('',#88923,.F.); +#88923 = EDGE_LOOP('',(#88924,#88925,#88926,#88927)); +#88924 = ORIENTED_EDGE('',*,*,#88626,.T.); +#88925 = ORIENTED_EDGE('',*,*,#88602,.T.); +#88926 = ORIENTED_EDGE('',*,*,#88571,.T.); +#88927 = ORIENTED_EDGE('',*,*,#88643,.T.); +#88928 = PLANE('',#88929); +#88929 = AXIS2_PLACEMENT_3D('',#88930,#88931,#88932); +#88930 = CARTESIAN_POINT('',(-0.25,0.25,-3.4)); +#88931 = DIRECTION('',(0.,-0.,-1.)); +#88932 = DIRECTION('',(-1.,3.330669073875E-16,-0.)); +#88933 = ADVANCED_FACE('',(#88934),#88940,.T.); +#88934 = FACE_BOUND('',#88935,.F.); +#88935 = EDGE_LOOP('',(#88936,#88937,#88938,#88939)); +#88936 = ORIENTED_EDGE('',*,*,#88722,.T.); +#88937 = ORIENTED_EDGE('',*,*,#88698,.T.); +#88938 = ORIENTED_EDGE('',*,*,#88667,.T.); +#88939 = ORIENTED_EDGE('',*,*,#88739,.T.); +#88940 = PLANE('',#88941); +#88941 = AXIS2_PLACEMENT_3D('',#88942,#88943,#88944); +#88942 = CARTESIAN_POINT('',(4.83,0.25,-3.4)); +#88943 = DIRECTION('',(0.,0.,-1.)); +#88944 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#88945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#88949)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#88946,#88947,#88948)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#88946 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#88947 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#88948 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#88949 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#88946, + 'distance_accuracy_value','confusion accuracy'); +#88950 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88951,#88953); +#88951 = ( REPRESENTATION_RELATIONSHIP('','',#87144,#87121) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88952) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88952 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87122); +#88953 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88954); +#88954 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('97','=>[0:1:1:45]','',#87116, + #87139,$); +#88955 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#87141)); +#88956 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88957,#88959); +#88957 = ( REPRESENTATION_RELATIONSHIP('','',#20302,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88958) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88958 = ITEM_DEFINED_TRANSFORMATION('','',#11,#319); +#88959 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88960); +#88960 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('99','J2','',#5,#20297,$); +#88961 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88962,#88964); +#88962 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88963) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88963 = ITEM_DEFINED_TRANSFORMATION('','',#11,#323); +#88964 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88965); +#88965 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('100','R56','',#5,#523,$); +#88966 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88967,#88969); +#88967 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88968) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88968 = ITEM_DEFINED_TRANSFORMATION('','',#11,#327); +#88969 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88970); +#88970 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('101','C11','',#5,#14742,$); +#88971 = SHAPE_DEFINITION_REPRESENTATION(#88972,#88978); +#88972 = PRODUCT_DEFINITION_SHAPE('','',#88973); +#88973 = PRODUCT_DEFINITION('design','',#88974,#88977); +#88974 = PRODUCT_DEFINITION_FORMATION('','',#88975); +#88975 = PRODUCT('CP_Elec_6.3x7.7','CP_Elec_6.3x7.7','',(#88976)); +#88976 = PRODUCT_CONTEXT('',#2,'mechanical'); +#88977 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#88978 = SHAPE_REPRESENTATION('',(#11,#88979),#88983); +#88979 = AXIS2_PLACEMENT_3D('',#88980,#88981,#88982); +#88980 = CARTESIAN_POINT('',(0.,0.,0.)); +#88981 = DIRECTION('',(0.,0.,1.)); +#88982 = DIRECTION('',(1.,0.,-0.)); +#88983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#88987)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#88984,#88985,#88986)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#88984 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#88985 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#88986 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#88987 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#88984, + 'distance_accuracy_value','confusion accuracy'); +#88988 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88989,#88991); +#88989 = ( REPRESENTATION_RELATIONSHIP('','',#88978,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88990) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88990 = ITEM_DEFINED_TRANSFORMATION('','',#11,#331); +#88991 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88992); +#88992 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('103','C43','',#5,#88973,$); +#88993 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#88975)); +#88994 = SHAPE_DEFINITION_REPRESENTATION(#88995,#89001); +#88995 = PRODUCT_DEFINITION_SHAPE('','',#88996); +#88996 = PRODUCT_DEFINITION('design','',#88997,#89000); +#88997 = PRODUCT_DEFINITION_FORMATION('','',#88998); +#88998 = PRODUCT('CP_Elec_63x77','CP_Elec_63x77','',(#88999)); +#88999 = PRODUCT_CONTEXT('',#2,'mechanical'); +#89000 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#89001 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#89002),#90367); +#89002 = MANIFOLD_SOLID_BREP('',#89003); +#89003 = CLOSED_SHELL('',(#89004,#89047,#89073,#89146,#89225,#89265, + #89344,#89369,#89394,#89450,#89506,#89531,#89556,#89621,#89694, + #89780,#89797,#89828,#89840,#89857,#89869,#89887,#89899,#89917, + #89929,#89960,#90012,#90044,#90069,#90094,#90126,#90151,#90176, + #90193,#90210,#90258,#90299,#90317,#90329,#90341,#90357)); +#89004 = ADVANCED_FACE('',(#89005),#89042,.T.); +#89005 = FACE_BOUND('',#89006,.T.); +#89006 = EDGE_LOOP('',(#89007,#89026,#89034,#89041)); +#89007 = ORIENTED_EDGE('',*,*,#89008,.T.); +#89008 = EDGE_CURVE('',#89009,#89009,#89011,.T.); +#89009 = VERTEX_POINT('',#89010); +#89010 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89011 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89012,#89013,#89014, + #89015,#89016,#89017,#89018,#89019,#89020,#89021,#89022,#89023, +#89024,#89025),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89012 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89013 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 1.903268122105)); +#89014 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 1.903268122105)); +#89015 = CARTESIAN_POINT('',(-0.778699260131,4.133102804313, + 1.903268122105)); +#89016 = CARTESIAN_POINT('',(1.417356467597,4.301676360907, + 1.903268122105)); +#89017 = CARTESIAN_POINT('',(3.314487228419,3.131786890306, + 1.903268122105)); +#89018 = CARTESIAN_POINT('',(4.70583335723,1.424009627085,1.903268122105 + )); +#89019 = CARTESIAN_POINT('',(4.705833357256,-1.424009627103, + 1.903268122105)); +#89020 = CARTESIAN_POINT('',(3.314487228412,-3.131786890273, + 1.903268122105)); +#89021 = CARTESIAN_POINT('',(1.41735646759,-4.301676360937, + 1.903268122105)); +#89022 = CARTESIAN_POINT('',(-0.778699260121,-4.133102804298, + 1.903268122105)); +#89023 = CARTESIAN_POINT('',(-2.374522784302,-3.035482526,1.903268122105 + )); +#89024 = CARTESIAN_POINT('',(-3.149999999999,-1.500440617323, + 1.903268122105)); +#89025 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89026 = ORIENTED_EDGE('',*,*,#89027,.F.); +#89027 = EDGE_CURVE('',#89028,#89009,#89030,.T.); +#89028 = VERTEX_POINT('',#89029); +#89029 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.07)); +#89030 = LINE('',#89031,#89032); +#89031 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,0.65)); +#89032 = VECTOR('',#89033,1.); +#89033 = DIRECTION('',(0.,0.,1.)); +#89034 = ORIENTED_EDGE('',*,*,#89035,.F.); +#89035 = EDGE_CURVE('',#89028,#89028,#89036,.T.); +#89036 = CIRCLE('',#89037,3.15); +#89037 = AXIS2_PLACEMENT_3D('',#89038,#89039,#89040); +#89038 = CARTESIAN_POINT('',(0.,0.,1.07)); +#89039 = DIRECTION('',(0.,0.,-1.)); +#89040 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89041 = ORIENTED_EDGE('',*,*,#89027,.T.); +#89042 = CYLINDRICAL_SURFACE('',#89043,3.15); +#89043 = AXIS2_PLACEMENT_3D('',#89044,#89045,#89046); +#89044 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89045 = DIRECTION('',(0.,0.,1.)); +#89046 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89047 = ADVANCED_FACE('',(#89048),#89068,.T.); +#89048 = FACE_BOUND('',#89049,.T.); +#89049 = EDGE_LOOP('',(#89050,#89051,#89060,#89067)); +#89050 = ORIENTED_EDGE('',*,*,#89035,.T.); +#89051 = ORIENTED_EDGE('',*,*,#89052,.T.); +#89052 = EDGE_CURVE('',#89028,#89053,#89055,.T.); +#89053 = VERTEX_POINT('',#89054); +#89054 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,0.65)); +#89055 = CIRCLE('',#89056,0.42); +#89056 = AXIS2_PLACEMENT_3D('',#89057,#89058,#89059); +#89057 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,1.07)); +#89058 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#89059 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89060 = ORIENTED_EDGE('',*,*,#89061,.F.); +#89061 = EDGE_CURVE('',#89053,#89053,#89062,.T.); +#89062 = CIRCLE('',#89063,2.73); +#89063 = AXIS2_PLACEMENT_3D('',#89064,#89065,#89066); +#89064 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89065 = DIRECTION('',(0.,0.,-1.)); +#89066 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89067 = ORIENTED_EDGE('',*,*,#89052,.F.); +#89068 = TOROIDAL_SURFACE('',#89069,2.73,0.42); +#89069 = AXIS2_PLACEMENT_3D('',#89070,#89071,#89072); +#89070 = CARTESIAN_POINT('',(0.,0.,1.07)); +#89071 = DIRECTION('',(0.,0.,-1.)); +#89072 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89073 = ADVANCED_FACE('',(#89074),#89103,.T.); +#89074 = FACE_BOUND('',#89075,.T.); +#89075 = EDGE_LOOP('',(#89076,#89084,#89101,#89102)); +#89076 = ORIENTED_EDGE('',*,*,#89077,.T.); +#89077 = EDGE_CURVE('',#89009,#89078,#89080,.T.); +#89078 = VERTEX_POINT('',#89079); +#89079 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89080 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#89081,#89082,#89083), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +19.792033717616),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#89081 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89082 = CARTESIAN_POINT('',(-3.15,1.195445924144E-15,1.932023556374)); +#89083 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89084 = ORIENTED_EDGE('',*,*,#89085,.T.); +#89085 = EDGE_CURVE('',#89078,#89078,#89086,.T.); +#89086 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89087,#89088,#89089, + #89090,#89091,#89092,#89093,#89094,#89095,#89096,#89097,#89098, +#89099,#89100),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89087 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89088 = CARTESIAN_POINT('',(-3.121363636365,1.486800248075, + 1.934637686762)); +#89089 = CARTESIAN_POINT('',(-2.35293621353,3.007887230305, + 1.934637686762)); +#89090 = CARTESIAN_POINT('',(-0.771620175949,4.095529142455, + 1.934637686762)); +#89091 = CARTESIAN_POINT('',(1.404471408801,4.262570212172, + 1.934637686762)); +#89092 = CARTESIAN_POINT('',(3.284355526343,3.103316100395, + 1.934637686762)); +#89093 = CARTESIAN_POINT('',(4.663053053981,1.411064085019, + 1.934637686762)); +#89094 = CARTESIAN_POINT('',(4.663053054011,-1.411064085037, + 1.934637686762)); +#89095 = CARTESIAN_POINT('',(3.284355526332,-3.103316100363, + 1.934637686762)); +#89096 = CARTESIAN_POINT('',(1.404471408797,-4.2625702122,1.934637686762 + )); +#89097 = CARTESIAN_POINT('',(-0.77162017594,-4.095529142442, + 1.934637686762)); +#89098 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 1.934637686762)); +#89099 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 1.934637686762)); +#89100 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89101 = ORIENTED_EDGE('',*,*,#89077,.F.); +#89102 = ORIENTED_EDGE('',*,*,#89008,.F.); +#89103 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#89104,#89105,#89106,#89107,#89108,#89109,#89110,#89111,#89112 + ,#89113,#89114,#89115,#89116,#89117) + ,(#89118,#89119,#89120,#89121,#89122,#89123,#89124,#89125,#89126 + ,#89127,#89128,#89129,#89130,#89131) + ,(#89132,#89133,#89134,#89135,#89136,#89137,#89138,#89139,#89140 + ,#89141,#89142,#89143,#89144,#89145 +)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,13,13 + ,1),(0.,19.792033717616),(-19.79203371761,3.914259941243E-16, + 19.792033717616,39.584067435232),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 + ,1.000000000001,1.,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945876,0.738548945875 + ,0.738548945878,0.738548945873,0.738548945879,0.738548945873 + ,0.738548945878,0.738548945875,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 +,1.000000000001,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#89104 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89105 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 1.903268122105)); +#89106 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 1.903268122105)); +#89107 = CARTESIAN_POINT('',(-0.778699260131,4.133102804313, + 1.903268122105)); +#89108 = CARTESIAN_POINT('',(1.417356467597,4.301676360907, + 1.903268122105)); +#89109 = CARTESIAN_POINT('',(3.314487228419,3.131786890306, + 1.903268122105)); +#89110 = CARTESIAN_POINT('',(4.70583335723,1.424009627085,1.903268122105 + )); +#89111 = CARTESIAN_POINT('',(4.705833357256,-1.424009627103, + 1.903268122105)); +#89112 = CARTESIAN_POINT('',(3.314487228412,-3.131786890273, + 1.903268122105)); +#89113 = CARTESIAN_POINT('',(1.41735646759,-4.301676360937, + 1.903268122105)); +#89114 = CARTESIAN_POINT('',(-0.778699260121,-4.133102804298, + 1.903268122105)); +#89115 = CARTESIAN_POINT('',(-2.374522784302,-3.035482526,1.903268122105 + )); +#89116 = CARTESIAN_POINT('',(-3.149999999999,-1.500440617323, + 1.903268122105)); +#89117 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89118 = CARTESIAN_POINT('',(-3.15,1.195445924144E-15,1.932023556374)); +#89119 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 1.932023556374)); +#89120 = CARTESIAN_POINT('',(-2.374522784297,3.035482525998, + 1.932023556374)); +#89121 = CARTESIAN_POINT('',(-0.778699260131,4.133102804308, + 1.932023556374)); +#89122 = CARTESIAN_POINT('',(1.4173564676,4.301676360916,1.932023556374) + ); +#89123 = CARTESIAN_POINT('',(3.314487228412,3.131786890296, + 1.932023556374)); +#89124 = CARTESIAN_POINT('',(4.705833357241,1.424009627092, + 1.932023556374)); +#89125 = CARTESIAN_POINT('',(4.705833357246,-1.424009627104, + 1.932023556374)); +#89126 = CARTESIAN_POINT('',(3.314487228417,-3.131786890276, + 1.932023556374)); +#89127 = CARTESIAN_POINT('',(1.417356467589,-4.301676360933, + 1.932023556374)); +#89128 = CARTESIAN_POINT('',(-0.778699260122,-4.1331028043, + 1.932023556374)); +#89129 = CARTESIAN_POINT('',(-2.374522784301,-3.035482526,1.932023556374 + )); +#89130 = CARTESIAN_POINT('',(-3.15,-1.500440617323,1.932023556374)); +#89131 = CARTESIAN_POINT('',(-3.15,1.195445924144E-15,1.932023556374)); +#89132 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89133 = CARTESIAN_POINT('',(-3.121363636365,1.486800248075, + 1.934637686762)); +#89134 = CARTESIAN_POINT('',(-2.35293621353,3.007887230305, + 1.934637686762)); +#89135 = CARTESIAN_POINT('',(-0.771620175949,4.095529142455, + 1.934637686762)); +#89136 = CARTESIAN_POINT('',(1.404471408801,4.262570212172, + 1.934637686762)); +#89137 = CARTESIAN_POINT('',(3.284355526343,3.103316100395, + 1.934637686762)); +#89138 = CARTESIAN_POINT('',(4.663053053981,1.411064085019, + 1.934637686762)); +#89139 = CARTESIAN_POINT('',(4.663053054011,-1.411064085037, + 1.934637686762)); +#89140 = CARTESIAN_POINT('',(3.284355526332,-3.103316100363, + 1.934637686762)); +#89141 = CARTESIAN_POINT('',(1.404471408797,-4.2625702122,1.934637686762 + )); +#89142 = CARTESIAN_POINT('',(-0.77162017594,-4.095529142442, + 1.934637686762)); +#89143 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 1.934637686762)); +#89144 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 1.934637686762)); +#89145 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89146 = ADVANCED_FACE('',(#89147,#89217),#89220,.T.); +#89147 = FACE_BOUND('',#89148,.T.); +#89148 = EDGE_LOOP('',(#89149,#89159,#89168,#89176,#89185,#89193,#89202, + #89210)); +#89149 = ORIENTED_EDGE('',*,*,#89150,.T.); +#89150 = EDGE_CURVE('',#89151,#89153,#89155,.T.); +#89151 = VERTEX_POINT('',#89152); +#89152 = CARTESIAN_POINT('',(-3.3,0.576628129734,0.65)); +#89153 = VERTEX_POINT('',#89154); +#89154 = CARTESIAN_POINT('',(-3.3,-0.576628129734,0.65)); +#89155 = LINE('',#89156,#89157); +#89156 = CARTESIAN_POINT('',(-3.3,1.15,0.65)); +#89157 = VECTOR('',#89158,1.); +#89158 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89159 = ORIENTED_EDGE('',*,*,#89160,.T.); +#89160 = EDGE_CURVE('',#89153,#89161,#89163,.T.); +#89161 = VERTEX_POINT('',#89162); +#89162 = CARTESIAN_POINT('',(-0.576628129734,-3.3,0.65)); +#89163 = CIRCLE('',#89164,3.35); +#89164 = AXIS2_PLACEMENT_3D('',#89165,#89166,#89167); +#89165 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89166 = DIRECTION('',(0.,0.,1.)); +#89167 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89168 = ORIENTED_EDGE('',*,*,#89169,.T.); +#89169 = EDGE_CURVE('',#89161,#89170,#89172,.T.); +#89170 = VERTEX_POINT('',#89171); +#89171 = CARTESIAN_POINT('',(0.576628129734,-3.3,0.65)); +#89172 = LINE('',#89173,#89174); +#89173 = CARTESIAN_POINT('',(-1.15,-3.3,0.65)); +#89174 = VECTOR('',#89175,1.); +#89175 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89176 = ORIENTED_EDGE('',*,*,#89177,.T.); +#89177 = EDGE_CURVE('',#89170,#89178,#89180,.T.); +#89178 = VERTEX_POINT('',#89179); +#89179 = CARTESIAN_POINT('',(3.3,-0.576628129734,0.65)); +#89180 = CIRCLE('',#89181,3.35); +#89181 = AXIS2_PLACEMENT_3D('',#89182,#89183,#89184); +#89182 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89183 = DIRECTION('',(0.,0.,1.)); +#89184 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89185 = ORIENTED_EDGE('',*,*,#89186,.T.); +#89186 = EDGE_CURVE('',#89178,#89187,#89189,.T.); +#89187 = VERTEX_POINT('',#89188); +#89188 = CARTESIAN_POINT('',(3.3,0.576628129734,0.65)); +#89189 = LINE('',#89190,#89191); +#89190 = CARTESIAN_POINT('',(3.3,-1.65,0.65)); +#89191 = VECTOR('',#89192,1.); +#89192 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89193 = ORIENTED_EDGE('',*,*,#89194,.T.); +#89194 = EDGE_CURVE('',#89187,#89195,#89197,.T.); +#89195 = VERTEX_POINT('',#89196); +#89196 = CARTESIAN_POINT('',(0.576628129734,3.3,0.65)); +#89197 = CIRCLE('',#89198,3.35); +#89198 = AXIS2_PLACEMENT_3D('',#89199,#89200,#89201); +#89199 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89200 = DIRECTION('',(0.,0.,1.)); +#89201 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89202 = ORIENTED_EDGE('',*,*,#89203,.T.); +#89203 = EDGE_CURVE('',#89195,#89204,#89206,.T.); +#89204 = VERTEX_POINT('',#89205); +#89205 = CARTESIAN_POINT('',(-0.576628129734,3.3,0.65)); +#89206 = LINE('',#89207,#89208); +#89207 = CARTESIAN_POINT('',(1.65,3.3,0.65)); +#89208 = VECTOR('',#89209,1.); +#89209 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89210 = ORIENTED_EDGE('',*,*,#89211,.T.); +#89211 = EDGE_CURVE('',#89204,#89151,#89212,.T.); +#89212 = CIRCLE('',#89213,3.35); +#89213 = AXIS2_PLACEMENT_3D('',#89214,#89215,#89216); +#89214 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89215 = DIRECTION('',(0.,0.,1.)); +#89216 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89217 = FACE_BOUND('',#89218,.T.); +#89218 = EDGE_LOOP('',(#89219)); +#89219 = ORIENTED_EDGE('',*,*,#89061,.T.); +#89220 = PLANE('',#89221); +#89221 = AXIS2_PLACEMENT_3D('',#89222,#89223,#89224); +#89222 = CARTESIAN_POINT('',(2.040955421701E-16,-6.734331626528E-17,0.65 + )); +#89223 = DIRECTION('',(0.,0.,1.)); +#89224 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89225 = ADVANCED_FACE('',(#89226),#89256,.F.); +#89226 = FACE_BOUND('',#89227,.F.); +#89227 = EDGE_LOOP('',(#89228,#89237,#89238,#89239)); +#89228 = ORIENTED_EDGE('',*,*,#89229,.F.); +#89229 = EDGE_CURVE('',#89078,#89230,#89232,.T.); +#89230 = VERTEX_POINT('',#89231); +#89231 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89232 = CIRCLE('',#89233,0.315); +#89233 = AXIS2_PLACEMENT_3D('',#89234,#89235,#89236); +#89234 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.248333333333)); +#89235 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#89236 = DIRECTION('',(0.,0.,-1.)); +#89237 = ORIENTED_EDGE('',*,*,#89085,.T.); +#89238 = ORIENTED_EDGE('',*,*,#89229,.T.); +#89239 = ORIENTED_EDGE('',*,*,#89240,.F.); +#89240 = EDGE_CURVE('',#89230,#89230,#89241,.T.); +#89241 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89242,#89243,#89244, + #89245,#89246,#89247,#89248,#89249,#89250,#89251,#89252,#89253, +#89254,#89255),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89242 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89243 = CARTESIAN_POINT('',(-3.121363636364,1.486800248075, + 2.562028979904)); +#89244 = CARTESIAN_POINT('',(-2.352936213531,3.007887230306, + 2.562028979904)); +#89245 = CARTESIAN_POINT('',(-0.771620175947,4.095529142455, + 2.562028979904)); +#89246 = CARTESIAN_POINT('',(1.404471408799,4.262570212172, + 2.562028979904)); +#89247 = CARTESIAN_POINT('',(3.284355526347,3.103316100394, + 2.562028979904)); +#89248 = CARTESIAN_POINT('',(4.663053053976,1.411064085019, + 2.562028979904)); +#89249 = CARTESIAN_POINT('',(4.663053054016,-1.411064085037, + 2.562028979904)); +#89250 = CARTESIAN_POINT('',(3.284355526329,-3.103316100364, + 2.562028979904)); +#89251 = CARTESIAN_POINT('',(1.404471408799,-4.262570212199, + 2.562028979904)); +#89252 = CARTESIAN_POINT('',(-0.771620175941,-4.095529142443, + 2.562028979904)); +#89253 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 2.562028979904)); +#89254 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 2.562028979904)); +#89255 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89256 = SURFACE_OF_REVOLUTION('',#89257,#89262); +#89257 = CIRCLE('',#89258,0.315); +#89258 = AXIS2_PLACEMENT_3D('',#89259,#89260,#89261); +#89259 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.248333333333)); +#89260 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#89261 = DIRECTION('',(0.,0.,-1.)); +#89262 = AXIS1_PLACEMENT('',#89263,#89264); +#89263 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89264 = DIRECTION('',(-0.,0.,-1.)); +#89265 = ADVANCED_FACE('',(#89266),#89339,.F.); +#89266 = FACE_BOUND('',#89267,.F.); +#89267 = EDGE_LOOP('',(#89268,#89278,#89286,#89294,#89300,#89301,#89309, + #89317,#89325,#89333)); +#89268 = ORIENTED_EDGE('',*,*,#89269,.F.); +#89269 = EDGE_CURVE('',#89270,#89272,#89274,.T.); +#89270 = VERTEX_POINT('',#89271); +#89271 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89272 = VERTEX_POINT('',#89273); +#89273 = CARTESIAN_POINT('',(-3.3,0.325,0.15)); +#89274 = LINE('',#89275,#89276); +#89275 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89276 = VECTOR('',#89277,1.); +#89277 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89278 = ORIENTED_EDGE('',*,*,#89279,.T.); +#89279 = EDGE_CURVE('',#89270,#89280,#89282,.T.); +#89280 = VERTEX_POINT('',#89281); +#89281 = CARTESIAN_POINT('',(-3.3,2.3,0.85)); +#89282 = LINE('',#89283,#89284); +#89283 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89284 = VECTOR('',#89285,1.); +#89285 = DIRECTION('',(0.,0.,1.)); +#89286 = ORIENTED_EDGE('',*,*,#89287,.T.); +#89287 = EDGE_CURVE('',#89280,#89288,#89290,.T.); +#89288 = VERTEX_POINT('',#89289); +#89289 = CARTESIAN_POINT('',(-3.3,0.576628129734,0.85)); +#89290 = LINE('',#89291,#89292); +#89291 = CARTESIAN_POINT('',(-3.3,3.3,0.85)); +#89292 = VECTOR('',#89293,1.); +#89293 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89294 = ORIENTED_EDGE('',*,*,#89295,.T.); +#89295 = EDGE_CURVE('',#89288,#89151,#89296,.T.); +#89296 = LINE('',#89297,#89298); +#89297 = CARTESIAN_POINT('',(-3.3,0.576628129734,0.65)); +#89298 = VECTOR('',#89299,1.); +#89299 = DIRECTION('',(0.,0.,-1.)); +#89300 = ORIENTED_EDGE('',*,*,#89150,.T.); +#89301 = ORIENTED_EDGE('',*,*,#89302,.F.); +#89302 = EDGE_CURVE('',#89303,#89153,#89305,.T.); +#89303 = VERTEX_POINT('',#89304); +#89304 = CARTESIAN_POINT('',(-3.3,-0.576628129734,0.85)); +#89305 = LINE('',#89306,#89307); +#89306 = CARTESIAN_POINT('',(-3.3,-0.576628129734,0.65)); +#89307 = VECTOR('',#89308,1.); +#89308 = DIRECTION('',(0.,0.,-1.)); +#89309 = ORIENTED_EDGE('',*,*,#89310,.T.); +#89310 = EDGE_CURVE('',#89303,#89311,#89313,.T.); +#89311 = VERTEX_POINT('',#89312); +#89312 = CARTESIAN_POINT('',(-3.3,-2.3,0.85)); +#89313 = LINE('',#89314,#89315); +#89314 = CARTESIAN_POINT('',(-3.3,3.3,0.85)); +#89315 = VECTOR('',#89316,1.); +#89316 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89317 = ORIENTED_EDGE('',*,*,#89318,.F.); +#89318 = EDGE_CURVE('',#89319,#89311,#89321,.T.); +#89319 = VERTEX_POINT('',#89320); +#89320 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89321 = LINE('',#89322,#89323); +#89322 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89323 = VECTOR('',#89324,1.); +#89324 = DIRECTION('',(0.,0.,1.)); +#89325 = ORIENTED_EDGE('',*,*,#89326,.F.); +#89326 = EDGE_CURVE('',#89327,#89319,#89329,.T.); +#89327 = VERTEX_POINT('',#89328); +#89328 = CARTESIAN_POINT('',(-3.3,-0.325,0.15)); +#89329 = LINE('',#89330,#89331); +#89330 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89331 = VECTOR('',#89332,1.); +#89332 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89333 = ORIENTED_EDGE('',*,*,#89334,.F.); +#89334 = EDGE_CURVE('',#89272,#89327,#89335,.T.); +#89335 = LINE('',#89336,#89337); +#89336 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89337 = VECTOR('',#89338,1.); +#89338 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89339 = PLANE('',#89340); +#89340 = AXIS2_PLACEMENT_3D('',#89341,#89342,#89343); +#89341 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89342 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89343 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89344 = ADVANCED_FACE('',(#89345),#89364,.F.); +#89345 = FACE_BOUND('',#89346,.F.); +#89346 = EDGE_LOOP('',(#89347,#89355,#89356,#89357)); +#89347 = ORIENTED_EDGE('',*,*,#89348,.T.); +#89348 = EDGE_CURVE('',#89349,#89204,#89351,.T.); +#89349 = VERTEX_POINT('',#89350); +#89350 = CARTESIAN_POINT('',(-0.576628129734,3.3,0.85)); +#89351 = LINE('',#89352,#89353); +#89352 = CARTESIAN_POINT('',(-0.576628129734,3.3,0.65)); +#89353 = VECTOR('',#89354,1.); +#89354 = DIRECTION('',(0.,0.,-1.)); +#89355 = ORIENTED_EDGE('',*,*,#89211,.T.); +#89356 = ORIENTED_EDGE('',*,*,#89295,.F.); +#89357 = ORIENTED_EDGE('',*,*,#89358,.T.); +#89358 = EDGE_CURVE('',#89288,#89349,#89359,.T.); +#89359 = CIRCLE('',#89360,3.35); +#89360 = AXIS2_PLACEMENT_3D('',#89361,#89362,#89363); +#89361 = CARTESIAN_POINT('',(0.,0.,0.85)); +#89362 = DIRECTION('',(0.,0.,-1.)); +#89363 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89364 = CYLINDRICAL_SURFACE('',#89365,3.35); +#89365 = AXIS2_PLACEMENT_3D('',#89366,#89367,#89368); +#89366 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89367 = DIRECTION('',(0.,0.,-1.)); +#89368 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89369 = ADVANCED_FACE('',(#89370),#89389,.F.); +#89370 = FACE_BOUND('',#89371,.F.); +#89371 = EDGE_LOOP('',(#89372,#89380,#89387,#89388)); +#89372 = ORIENTED_EDGE('',*,*,#89373,.F.); +#89373 = EDGE_CURVE('',#89374,#89161,#89376,.T.); +#89374 = VERTEX_POINT('',#89375); +#89375 = CARTESIAN_POINT('',(-0.576628129734,-3.3,0.85)); +#89376 = LINE('',#89377,#89378); +#89377 = CARTESIAN_POINT('',(-0.576628129734,-3.3,0.65)); +#89378 = VECTOR('',#89379,1.); +#89379 = DIRECTION('',(0.,0.,-1.)); +#89380 = ORIENTED_EDGE('',*,*,#89381,.T.); +#89381 = EDGE_CURVE('',#89374,#89303,#89382,.T.); +#89382 = CIRCLE('',#89383,3.35); +#89383 = AXIS2_PLACEMENT_3D('',#89384,#89385,#89386); +#89384 = CARTESIAN_POINT('',(0.,0.,0.85)); +#89385 = DIRECTION('',(0.,0.,-1.)); +#89386 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89387 = ORIENTED_EDGE('',*,*,#89302,.T.); +#89388 = ORIENTED_EDGE('',*,*,#89160,.T.); +#89389 = CYLINDRICAL_SURFACE('',#89390,3.35); +#89390 = AXIS2_PLACEMENT_3D('',#89391,#89392,#89393); +#89391 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89392 = DIRECTION('',(0.,0.,-1.)); +#89393 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89394 = ADVANCED_FACE('',(#89395),#89445,.F.); +#89395 = FACE_BOUND('',#89396,.F.); +#89396 = EDGE_LOOP('',(#89397,#89407,#89415,#89423,#89429,#89430,#89431, + #89439)); +#89397 = ORIENTED_EDGE('',*,*,#89398,.F.); +#89398 = EDGE_CURVE('',#89399,#89401,#89403,.T.); +#89399 = VERTEX_POINT('',#89400); +#89400 = CARTESIAN_POINT('',(2.9,3.3,0.15)); +#89401 = VERTEX_POINT('',#89402); +#89402 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89403 = LINE('',#89404,#89405); +#89404 = CARTESIAN_POINT('',(3.3,3.3,0.15)); +#89405 = VECTOR('',#89406,1.); +#89406 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89407 = ORIENTED_EDGE('',*,*,#89408,.T.); +#89408 = EDGE_CURVE('',#89399,#89409,#89411,.T.); +#89409 = VERTEX_POINT('',#89410); +#89410 = CARTESIAN_POINT('',(2.9,3.3,1.15)); +#89411 = LINE('',#89412,#89413); +#89412 = CARTESIAN_POINT('',(2.9,3.3,0.15)); +#89413 = VECTOR('',#89414,1.); +#89414 = DIRECTION('',(0.,0.,1.)); +#89415 = ORIENTED_EDGE('',*,*,#89416,.T.); +#89416 = EDGE_CURVE('',#89409,#89417,#89419,.T.); +#89417 = VERTEX_POINT('',#89418); +#89418 = CARTESIAN_POINT('',(0.576628129734,3.3,1.15)); +#89419 = LINE('',#89420,#89421); +#89420 = CARTESIAN_POINT('',(3.3,3.3,1.15)); +#89421 = VECTOR('',#89422,1.); +#89422 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89423 = ORIENTED_EDGE('',*,*,#89424,.T.); +#89424 = EDGE_CURVE('',#89417,#89195,#89425,.T.); +#89425 = LINE('',#89426,#89427); +#89426 = CARTESIAN_POINT('',(0.576628129734,3.3,0.65)); +#89427 = VECTOR('',#89428,1.); +#89428 = DIRECTION('',(0.,0.,-1.)); +#89429 = ORIENTED_EDGE('',*,*,#89203,.T.); +#89430 = ORIENTED_EDGE('',*,*,#89348,.F.); +#89431 = ORIENTED_EDGE('',*,*,#89432,.T.); +#89432 = EDGE_CURVE('',#89349,#89433,#89435,.T.); +#89433 = VERTEX_POINT('',#89434); +#89434 = CARTESIAN_POINT('',(-2.3,3.3,0.85)); +#89435 = LINE('',#89436,#89437); +#89436 = CARTESIAN_POINT('',(4.041334437186E-16,3.3,0.85)); +#89437 = VECTOR('',#89438,1.); +#89438 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89439 = ORIENTED_EDGE('',*,*,#89440,.F.); +#89440 = EDGE_CURVE('',#89401,#89433,#89441,.T.); +#89441 = LINE('',#89442,#89443); +#89442 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89443 = VECTOR('',#89444,1.); +#89444 = DIRECTION('',(0.,0.,1.)); +#89445 = PLANE('',#89446); +#89446 = AXIS2_PLACEMENT_3D('',#89447,#89448,#89449); +#89447 = CARTESIAN_POINT('',(3.3,3.3,0.15)); +#89448 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89449 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89450 = ADVANCED_FACE('',(#89451),#89501,.F.); +#89451 = FACE_BOUND('',#89452,.F.); +#89452 = EDGE_LOOP('',(#89453,#89463,#89471,#89479,#89485,#89486,#89487, + #89495)); +#89453 = ORIENTED_EDGE('',*,*,#89454,.F.); +#89454 = EDGE_CURVE('',#89455,#89457,#89459,.T.); +#89455 = VERTEX_POINT('',#89456); +#89456 = CARTESIAN_POINT('',(2.9,-3.3,0.15)); +#89457 = VERTEX_POINT('',#89458); +#89458 = CARTESIAN_POINT('',(2.9,-3.3,1.15)); +#89459 = LINE('',#89460,#89461); +#89460 = CARTESIAN_POINT('',(2.9,-3.3,0.15)); +#89461 = VECTOR('',#89462,1.); +#89462 = DIRECTION('',(0.,0.,1.)); +#89463 = ORIENTED_EDGE('',*,*,#89464,.F.); +#89464 = EDGE_CURVE('',#89465,#89455,#89467,.T.); +#89465 = VERTEX_POINT('',#89466); +#89466 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89467 = LINE('',#89468,#89469); +#89468 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89469 = VECTOR('',#89470,1.); +#89470 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89471 = ORIENTED_EDGE('',*,*,#89472,.T.); +#89472 = EDGE_CURVE('',#89465,#89473,#89475,.T.); +#89473 = VERTEX_POINT('',#89474); +#89474 = CARTESIAN_POINT('',(-2.3,-3.3,0.85)); +#89475 = LINE('',#89476,#89477); +#89476 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89477 = VECTOR('',#89478,1.); +#89478 = DIRECTION('',(0.,0.,1.)); +#89479 = ORIENTED_EDGE('',*,*,#89480,.F.); +#89480 = EDGE_CURVE('',#89374,#89473,#89481,.T.); +#89481 = LINE('',#89482,#89483); +#89482 = CARTESIAN_POINT('',(-4.041334437186E-16,-3.3,0.85)); +#89483 = VECTOR('',#89484,1.); +#89484 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89485 = ORIENTED_EDGE('',*,*,#89373,.T.); +#89486 = ORIENTED_EDGE('',*,*,#89169,.T.); +#89487 = ORIENTED_EDGE('',*,*,#89488,.F.); +#89488 = EDGE_CURVE('',#89489,#89170,#89491,.T.); +#89489 = VERTEX_POINT('',#89490); +#89490 = CARTESIAN_POINT('',(0.576628129734,-3.3,1.15)); +#89491 = LINE('',#89492,#89493); +#89492 = CARTESIAN_POINT('',(0.576628129734,-3.3,0.65)); +#89493 = VECTOR('',#89494,1.); +#89494 = DIRECTION('',(0.,0.,-1.)); +#89495 = ORIENTED_EDGE('',*,*,#89496,.T.); +#89496 = EDGE_CURVE('',#89489,#89457,#89497,.T.); +#89497 = LINE('',#89498,#89499); +#89498 = CARTESIAN_POINT('',(-2.3,-3.3,1.15)); +#89499 = VECTOR('',#89500,1.); +#89500 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89501 = PLANE('',#89502); +#89502 = AXIS2_PLACEMENT_3D('',#89503,#89504,#89505); +#89503 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89504 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89505 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89506 = ADVANCED_FACE('',(#89507),#89526,.F.); +#89507 = FACE_BOUND('',#89508,.F.); +#89508 = EDGE_LOOP('',(#89509,#89518,#89524,#89525)); +#89509 = ORIENTED_EDGE('',*,*,#89510,.F.); +#89510 = EDGE_CURVE('',#89511,#89417,#89513,.T.); +#89511 = VERTEX_POINT('',#89512); +#89512 = CARTESIAN_POINT('',(3.3,0.576628129734,1.15)); +#89513 = CIRCLE('',#89514,3.35); +#89514 = AXIS2_PLACEMENT_3D('',#89515,#89516,#89517); +#89515 = CARTESIAN_POINT('',(0.,0.,1.15)); +#89516 = DIRECTION('',(0.,0.,1.)); +#89517 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89518 = ORIENTED_EDGE('',*,*,#89519,.T.); +#89519 = EDGE_CURVE('',#89511,#89187,#89520,.T.); +#89520 = LINE('',#89521,#89522); +#89521 = CARTESIAN_POINT('',(3.3,0.576628129734,0.65)); +#89522 = VECTOR('',#89523,1.); +#89523 = DIRECTION('',(0.,0.,-1.)); +#89524 = ORIENTED_EDGE('',*,*,#89194,.T.); +#89525 = ORIENTED_EDGE('',*,*,#89424,.F.); +#89526 = CYLINDRICAL_SURFACE('',#89527,3.35); +#89527 = AXIS2_PLACEMENT_3D('',#89528,#89529,#89530); +#89528 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89529 = DIRECTION('',(0.,0.,-1.)); +#89530 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89531 = ADVANCED_FACE('',(#89532),#89551,.F.); +#89532 = FACE_BOUND('',#89533,.F.); +#89533 = EDGE_LOOP('',(#89534,#89542,#89549,#89550)); +#89534 = ORIENTED_EDGE('',*,*,#89535,.F.); +#89535 = EDGE_CURVE('',#89536,#89178,#89538,.T.); +#89536 = VERTEX_POINT('',#89537); +#89537 = CARTESIAN_POINT('',(3.3,-0.576628129734,1.15)); +#89538 = LINE('',#89539,#89540); +#89539 = CARTESIAN_POINT('',(3.3,-0.576628129734,0.65)); +#89540 = VECTOR('',#89541,1.); +#89541 = DIRECTION('',(0.,0.,-1.)); +#89542 = ORIENTED_EDGE('',*,*,#89543,.F.); +#89543 = EDGE_CURVE('',#89489,#89536,#89544,.T.); +#89544 = CIRCLE('',#89545,3.35); +#89545 = AXIS2_PLACEMENT_3D('',#89546,#89547,#89548); +#89546 = CARTESIAN_POINT('',(0.,0.,1.15)); +#89547 = DIRECTION('',(0.,0.,1.)); +#89548 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89549 = ORIENTED_EDGE('',*,*,#89488,.T.); +#89550 = ORIENTED_EDGE('',*,*,#89177,.T.); +#89551 = CYLINDRICAL_SURFACE('',#89552,3.35); +#89552 = AXIS2_PLACEMENT_3D('',#89553,#89554,#89555); +#89553 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89554 = DIRECTION('',(0.,0.,-1.)); +#89555 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89556 = ADVANCED_FACE('',(#89557),#89616,.F.); +#89557 = FACE_BOUND('',#89558,.F.); +#89558 = EDGE_LOOP('',(#89559,#89569,#89577,#89583,#89584,#89585,#89586, + #89594,#89602,#89610)); +#89559 = ORIENTED_EDGE('',*,*,#89560,.F.); +#89560 = EDGE_CURVE('',#89561,#89563,#89565,.T.); +#89561 = VERTEX_POINT('',#89562); +#89562 = CARTESIAN_POINT('',(3.3,-2.9,0.15)); +#89563 = VERTEX_POINT('',#89564); +#89564 = CARTESIAN_POINT('',(3.3,-0.325,0.15)); +#89565 = LINE('',#89566,#89567); +#89566 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89567 = VECTOR('',#89568,1.); +#89568 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89569 = ORIENTED_EDGE('',*,*,#89570,.T.); +#89570 = EDGE_CURVE('',#89561,#89571,#89573,.T.); +#89571 = VERTEX_POINT('',#89572); +#89572 = CARTESIAN_POINT('',(3.3,-2.9,1.15)); +#89573 = LINE('',#89574,#89575); +#89574 = CARTESIAN_POINT('',(3.3,-2.9,0.15)); +#89575 = VECTOR('',#89576,1.); +#89576 = DIRECTION('',(0.,0.,1.)); +#89577 = ORIENTED_EDGE('',*,*,#89578,.T.); +#89578 = EDGE_CURVE('',#89571,#89536,#89579,.T.); +#89579 = LINE('',#89580,#89581); +#89580 = CARTESIAN_POINT('',(3.3,-3.3,1.15)); +#89581 = VECTOR('',#89582,1.); +#89582 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89583 = ORIENTED_EDGE('',*,*,#89535,.T.); +#89584 = ORIENTED_EDGE('',*,*,#89186,.T.); +#89585 = ORIENTED_EDGE('',*,*,#89519,.F.); +#89586 = ORIENTED_EDGE('',*,*,#89587,.T.); +#89587 = EDGE_CURVE('',#89511,#89588,#89590,.T.); +#89588 = VERTEX_POINT('',#89589); +#89589 = CARTESIAN_POINT('',(3.3,2.9,1.15)); +#89590 = LINE('',#89591,#89592); +#89591 = CARTESIAN_POINT('',(3.3,-3.3,1.15)); +#89592 = VECTOR('',#89593,1.); +#89593 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89594 = ORIENTED_EDGE('',*,*,#89595,.F.); +#89595 = EDGE_CURVE('',#89596,#89588,#89598,.T.); +#89596 = VERTEX_POINT('',#89597); +#89597 = CARTESIAN_POINT('',(3.3,2.9,0.15)); +#89598 = LINE('',#89599,#89600); +#89599 = CARTESIAN_POINT('',(3.3,2.9,0.15)); +#89600 = VECTOR('',#89601,1.); +#89601 = DIRECTION('',(0.,0.,1.)); +#89602 = ORIENTED_EDGE('',*,*,#89603,.F.); +#89603 = EDGE_CURVE('',#89604,#89596,#89606,.T.); +#89604 = VERTEX_POINT('',#89605); +#89605 = CARTESIAN_POINT('',(3.3,0.325,0.15)); +#89606 = LINE('',#89607,#89608); +#89607 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89608 = VECTOR('',#89609,1.); +#89609 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89610 = ORIENTED_EDGE('',*,*,#89611,.F.); +#89611 = EDGE_CURVE('',#89563,#89604,#89612,.T.); +#89612 = LINE('',#89613,#89614); +#89613 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89614 = VECTOR('',#89615,1.); +#89615 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89616 = PLANE('',#89617); +#89617 = AXIS2_PLACEMENT_3D('',#89618,#89619,#89620); +#89618 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89619 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89620 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89621 = ADVANCED_FACE('',(#89622),#89651,.T.); +#89622 = FACE_BOUND('',#89623,.T.); +#89623 = EDGE_LOOP('',(#89624,#89632,#89649,#89650)); +#89624 = ORIENTED_EDGE('',*,*,#89625,.T.); +#89625 = EDGE_CURVE('',#89230,#89626,#89628,.T.); +#89626 = VERTEX_POINT('',#89627); +#89627 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89628 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#89629,#89630,#89631), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +19.792033717616),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#89629 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89630 = CARTESIAN_POINT('',(-3.15,-4.395309519645E-16,2.564643110293)); +#89631 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89632 = ORIENTED_EDGE('',*,*,#89633,.T.); +#89633 = EDGE_CURVE('',#89626,#89626,#89634,.T.); +#89634 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89635,#89636,#89637, + #89638,#89639,#89640,#89641,#89642,#89643,#89644,#89645,#89646, +#89647,#89648),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89635 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89636 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 2.593398544562)); +#89637 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 2.593398544562)); +#89638 = CARTESIAN_POINT('',(-0.778699260131,4.133102804314, + 2.593398544562)); +#89639 = CARTESIAN_POINT('',(1.417356467596,4.301676360904, + 2.593398544562)); +#89640 = CARTESIAN_POINT('',(3.314487228421,3.131786890311, + 2.593398544561)); +#89641 = CARTESIAN_POINT('',(4.705833357228,1.424009627078, + 2.593398544562)); +#89642 = CARTESIAN_POINT('',(4.705833357259,-1.424009627096, + 2.593398544561)); +#89643 = CARTESIAN_POINT('',(3.31448722841,-3.131786890279, + 2.593398544562)); +#89644 = CARTESIAN_POINT('',(1.417356467592,-4.301676360932, + 2.593398544562)); +#89645 = CARTESIAN_POINT('',(-0.778699260122,-4.133102804301, + 2.593398544562)); +#89646 = CARTESIAN_POINT('',(-2.374522784302,-3.035482525999, + 2.593398544562)); +#89647 = CARTESIAN_POINT('',(-3.15,-1.500440617323,2.593398544562)); +#89648 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89649 = ORIENTED_EDGE('',*,*,#89625,.F.); +#89650 = ORIENTED_EDGE('',*,*,#89240,.F.); +#89651 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#89652,#89653,#89654,#89655,#89656,#89657,#89658,#89659,#89660 + ,#89661,#89662,#89663,#89664,#89665) + ,(#89666,#89667,#89668,#89669,#89670,#89671,#89672,#89673,#89674 + ,#89675,#89676,#89677,#89678,#89679) + ,(#89680,#89681,#89682,#89683,#89684,#89685,#89686,#89687,#89688 + ,#89689,#89690,#89691,#89692,#89693 +)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,13,13 + ,1),(0.,19.792033717616),(-19.79203371761,3.914259941243E-16, + 19.792033717616,39.584067435232),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 + ,1.000000000001,1.,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945876,0.738548945875 + ,0.738548945878,0.738548945873,0.738548945879,0.738548945873 + ,0.738548945878,0.738548945875,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 +,1.000000000001,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#89652 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89653 = CARTESIAN_POINT('',(-3.121363636364,1.486800248075, + 2.562028979904)); +#89654 = CARTESIAN_POINT('',(-2.352936213531,3.007887230306, + 2.562028979904)); +#89655 = CARTESIAN_POINT('',(-0.771620175947,4.095529142455, + 2.562028979904)); +#89656 = CARTESIAN_POINT('',(1.404471408799,4.262570212172, + 2.562028979904)); +#89657 = CARTESIAN_POINT('',(3.284355526347,3.103316100394, + 2.562028979904)); +#89658 = CARTESIAN_POINT('',(4.663053053976,1.411064085019, + 2.562028979904)); +#89659 = CARTESIAN_POINT('',(4.663053054016,-1.411064085037, + 2.562028979904)); +#89660 = CARTESIAN_POINT('',(3.284355526329,-3.103316100364, + 2.562028979904)); +#89661 = CARTESIAN_POINT('',(1.404471408799,-4.262570212199, + 2.562028979904)); +#89662 = CARTESIAN_POINT('',(-0.771620175941,-4.095529142443, + 2.562028979904)); +#89663 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 2.562028979904)); +#89664 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 2.562028979904)); +#89665 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89666 = CARTESIAN_POINT('',(-3.15,-4.395309519645E-16,2.564643110293)); +#89667 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 2.564643110293)); +#89668 = CARTESIAN_POINT('',(-2.374522784295,3.035482525996, + 2.564643110293)); +#89669 = CARTESIAN_POINT('',(-0.778699260136,4.133102804312, + 2.564643110292)); +#89670 = CARTESIAN_POINT('',(1.41735646761,4.301676360909,2.564643110293 + )); +#89671 = CARTESIAN_POINT('',(3.314487228397,3.131786890306, + 2.564643110292)); +#89672 = CARTESIAN_POINT('',(4.705833357259,1.424009627081, + 2.564643110293)); +#89673 = CARTESIAN_POINT('',(4.705833357228,-1.424009627094, + 2.564643110292)); +#89674 = CARTESIAN_POINT('',(3.314487228431,-3.131786890283, + 2.564643110293)); +#89675 = CARTESIAN_POINT('',(1.41735646758,-4.301676360929, + 2.564643110292)); +#89676 = CARTESIAN_POINT('',(-0.778699260117,-4.133102804302, + 2.564643110293)); +#89677 = CARTESIAN_POINT('',(-2.374522784304,-3.035482525999, + 2.564643110293)); +#89678 = CARTESIAN_POINT('',(-3.149999999999,-1.500440617323, + 2.564643110293)); +#89679 = CARTESIAN_POINT('',(-3.15,-4.395309519645E-16,2.564643110293)); +#89680 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89681 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 2.593398544562)); +#89682 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 2.593398544562)); +#89683 = CARTESIAN_POINT('',(-0.778699260131,4.133102804314, + 2.593398544562)); +#89684 = CARTESIAN_POINT('',(1.417356467596,4.301676360904, + 2.593398544562)); +#89685 = CARTESIAN_POINT('',(3.314487228421,3.131786890311, + 2.593398544561)); +#89686 = CARTESIAN_POINT('',(4.705833357228,1.424009627078, + 2.593398544562)); +#89687 = CARTESIAN_POINT('',(4.705833357259,-1.424009627096, + 2.593398544561)); +#89688 = CARTESIAN_POINT('',(3.31448722841,-3.131786890279, + 2.593398544562)); +#89689 = CARTESIAN_POINT('',(1.417356467592,-4.301676360932, + 2.593398544562)); +#89690 = CARTESIAN_POINT('',(-0.778699260122,-4.133102804301, + 2.593398544562)); +#89691 = CARTESIAN_POINT('',(-2.374522784302,-3.035482525999, + 2.593398544562)); +#89692 = CARTESIAN_POINT('',(-3.15,-1.500440617323,2.593398544562)); +#89693 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89694 = ADVANCED_FACE('',(#89695),#89775,.F.); +#89695 = FACE_BOUND('',#89696,.F.); +#89696 = EDGE_LOOP('',(#89697,#89704,#89705,#89713,#89722,#89728,#89729, + #89736,#89737,#89743,#89744,#89752,#89761,#89767,#89768,#89774)); +#89697 = ORIENTED_EDGE('',*,*,#89698,.F.); +#89698 = EDGE_CURVE('',#89561,#89455,#89699,.T.); +#89699 = CIRCLE('',#89700,0.4); +#89700 = AXIS2_PLACEMENT_3D('',#89701,#89702,#89703); +#89701 = CARTESIAN_POINT('',(2.9,-2.9,0.15)); +#89702 = DIRECTION('',(0.,0.,-1.)); +#89703 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89704 = ORIENTED_EDGE('',*,*,#89560,.T.); +#89705 = ORIENTED_EDGE('',*,*,#89706,.F.); +#89706 = EDGE_CURVE('',#89707,#89563,#89709,.T.); +#89707 = VERTEX_POINT('',#89708); +#89708 = CARTESIAN_POINT('',(1.225,-0.325,0.15)); +#89709 = LINE('',#89710,#89711); +#89710 = CARTESIAN_POINT('',(1.225,-0.325,0.15)); +#89711 = VECTOR('',#89712,1.); +#89712 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#89713 = ORIENTED_EDGE('',*,*,#89714,.F.); +#89714 = EDGE_CURVE('',#89715,#89707,#89717,.T.); +#89715 = VERTEX_POINT('',#89716); +#89716 = CARTESIAN_POINT('',(1.225,0.325,0.15)); +#89717 = CIRCLE('',#89718,0.325); +#89718 = AXIS2_PLACEMENT_3D('',#89719,#89720,#89721); +#89719 = CARTESIAN_POINT('',(1.225,-3.000384657911E-16,0.15)); +#89720 = DIRECTION('',(0.,-0.,1.)); +#89721 = DIRECTION('',(9.281435288296E-16,1.,0.)); +#89722 = ORIENTED_EDGE('',*,*,#89723,.F.); +#89723 = EDGE_CURVE('',#89604,#89715,#89724,.T.); +#89724 = LINE('',#89725,#89726); +#89725 = CARTESIAN_POINT('',(3.9,0.325,0.15)); +#89726 = VECTOR('',#89727,1.); +#89727 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#89728 = ORIENTED_EDGE('',*,*,#89603,.T.); +#89729 = ORIENTED_EDGE('',*,*,#89730,.F.); +#89730 = EDGE_CURVE('',#89399,#89596,#89731,.T.); +#89731 = CIRCLE('',#89732,0.4); +#89732 = AXIS2_PLACEMENT_3D('',#89733,#89734,#89735); +#89733 = CARTESIAN_POINT('',(2.9,2.9,0.15)); +#89734 = DIRECTION('',(0.,0.,-1.)); +#89735 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89736 = ORIENTED_EDGE('',*,*,#89398,.T.); +#89737 = ORIENTED_EDGE('',*,*,#89738,.T.); +#89738 = EDGE_CURVE('',#89401,#89270,#89739,.T.); +#89739 = LINE('',#89740,#89741); +#89740 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89741 = VECTOR('',#89742,1.); +#89742 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#89743 = ORIENTED_EDGE('',*,*,#89269,.T.); +#89744 = ORIENTED_EDGE('',*,*,#89745,.F.); +#89745 = EDGE_CURVE('',#89746,#89272,#89748,.T.); +#89746 = VERTEX_POINT('',#89747); +#89747 = CARTESIAN_POINT('',(-1.225,0.325,0.15)); +#89748 = LINE('',#89749,#89750); +#89749 = CARTESIAN_POINT('',(-1.225,0.325,0.15)); +#89750 = VECTOR('',#89751,1.); +#89751 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#89752 = ORIENTED_EDGE('',*,*,#89753,.F.); +#89753 = EDGE_CURVE('',#89754,#89746,#89756,.T.); +#89754 = VERTEX_POINT('',#89755); +#89755 = CARTESIAN_POINT('',(-1.225,-0.325,0.15)); +#89756 = CIRCLE('',#89757,0.325); +#89757 = AXIS2_PLACEMENT_3D('',#89758,#89759,#89760); +#89758 = CARTESIAN_POINT('',(-1.225,1.500192328956E-16,0.15)); +#89759 = DIRECTION('',(0.,0.,1.)); +#89760 = DIRECTION('',(-8.056788489148E-16,-1.,0.)); +#89761 = ORIENTED_EDGE('',*,*,#89762,.F.); +#89762 = EDGE_CURVE('',#89327,#89754,#89763,.T.); +#89763 = LINE('',#89764,#89765); +#89764 = CARTESIAN_POINT('',(-3.9,-0.325,0.15)); +#89765 = VECTOR('',#89766,1.); +#89766 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89767 = ORIENTED_EDGE('',*,*,#89326,.T.); +#89768 = ORIENTED_EDGE('',*,*,#89769,.T.); +#89769 = EDGE_CURVE('',#89319,#89465,#89770,.T.); +#89770 = LINE('',#89771,#89772); +#89771 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89772 = VECTOR('',#89773,1.); +#89773 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89774 = ORIENTED_EDGE('',*,*,#89464,.T.); +#89775 = PLANE('',#89776); +#89776 = AXIS2_PLACEMENT_3D('',#89777,#89778,#89779); +#89777 = CARTESIAN_POINT('',(0.169665910187,-2.077808138351E-17,0.15)); +#89778 = DIRECTION('',(0.,0.,1.)); +#89779 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89780 = ADVANCED_FACE('',(#89781),#89792,.F.); +#89781 = FACE_BOUND('',#89782,.F.); +#89782 = EDGE_LOOP('',(#89783,#89784,#89785,#89791)); +#89783 = ORIENTED_EDGE('',*,*,#89738,.F.); +#89784 = ORIENTED_EDGE('',*,*,#89440,.T.); +#89785 = ORIENTED_EDGE('',*,*,#89786,.T.); +#89786 = EDGE_CURVE('',#89433,#89280,#89787,.T.); +#89787 = LINE('',#89788,#89789); +#89788 = CARTESIAN_POINT('',(-1.725,3.875,0.85)); +#89789 = VECTOR('',#89790,1.); +#89790 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#89791 = ORIENTED_EDGE('',*,*,#89279,.F.); +#89792 = PLANE('',#89793); +#89793 = AXIS2_PLACEMENT_3D('',#89794,#89795,#89796); +#89794 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89795 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89796 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#89797 = ADVANCED_FACE('',(#89798),#89823,.T.); +#89798 = FACE_BOUND('',#89799,.T.); +#89799 = EDGE_LOOP('',(#89800,#89808,#89816,#89822)); +#89800 = ORIENTED_EDGE('',*,*,#89801,.T.); +#89801 = EDGE_CURVE('',#89272,#89802,#89804,.T.); +#89802 = VERTEX_POINT('',#89803); +#89803 = CARTESIAN_POINT('',(-3.9,0.325,0.15)); +#89804 = LINE('',#89805,#89806); +#89805 = CARTESIAN_POINT('',(-1.225,0.325,0.15)); +#89806 = VECTOR('',#89807,1.); +#89807 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#89808 = ORIENTED_EDGE('',*,*,#89809,.T.); +#89809 = EDGE_CURVE('',#89802,#89810,#89812,.T.); +#89810 = VERTEX_POINT('',#89811); +#89811 = CARTESIAN_POINT('',(-3.9,-0.325,0.15)); +#89812 = LINE('',#89813,#89814); +#89813 = CARTESIAN_POINT('',(-3.9,0.325,0.15)); +#89814 = VECTOR('',#89815,1.); +#89815 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89816 = ORIENTED_EDGE('',*,*,#89817,.T.); +#89817 = EDGE_CURVE('',#89810,#89327,#89818,.T.); +#89818 = LINE('',#89819,#89820); +#89819 = CARTESIAN_POINT('',(-3.9,-0.325,0.15)); +#89820 = VECTOR('',#89821,1.); +#89821 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89822 = ORIENTED_EDGE('',*,*,#89334,.F.); +#89823 = PLANE('',#89824); +#89824 = AXIS2_PLACEMENT_3D('',#89825,#89826,#89827); +#89825 = CARTESIAN_POINT('',(-2.47395012666,2.870543344061E-16,0.15)); +#89826 = DIRECTION('',(0.,0.,1.)); +#89827 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89828 = ADVANCED_FACE('',(#89829),#89835,.T.); +#89829 = FACE_BOUND('',#89830,.T.); +#89830 = EDGE_LOOP('',(#89831,#89832,#89833,#89834)); +#89831 = ORIENTED_EDGE('',*,*,#89358,.T.); +#89832 = ORIENTED_EDGE('',*,*,#89432,.T.); +#89833 = ORIENTED_EDGE('',*,*,#89786,.T.); +#89834 = ORIENTED_EDGE('',*,*,#89287,.T.); +#89835 = PLANE('',#89836); +#89836 = AXIS2_PLACEMENT_3D('',#89837,#89838,#89839); +#89837 = CARTESIAN_POINT('',(4.041334437186E-16,3.3,0.85)); +#89838 = DIRECTION('',(0.,0.,1.)); +#89839 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89840 = ADVANCED_FACE('',(#89841),#89852,.F.); +#89841 = FACE_BOUND('',#89842,.F.); +#89842 = EDGE_LOOP('',(#89843,#89844,#89845,#89851)); +#89843 = ORIENTED_EDGE('',*,*,#89769,.F.); +#89844 = ORIENTED_EDGE('',*,*,#89318,.T.); +#89845 = ORIENTED_EDGE('',*,*,#89846,.T.); +#89846 = EDGE_CURVE('',#89311,#89473,#89847,.T.); +#89847 = LINE('',#89848,#89849); +#89848 = CARTESIAN_POINT('',(-3.875,-1.725,0.85)); +#89849 = VECTOR('',#89850,1.); +#89850 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89851 = ORIENTED_EDGE('',*,*,#89472,.F.); +#89852 = PLANE('',#89853); +#89853 = AXIS2_PLACEMENT_3D('',#89854,#89855,#89856); +#89854 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89855 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#89856 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89857 = ADVANCED_FACE('',(#89858),#89864,.T.); +#89858 = FACE_BOUND('',#89859,.T.); +#89859 = EDGE_LOOP('',(#89860,#89861,#89862,#89863)); +#89860 = ORIENTED_EDGE('',*,*,#89480,.F.); +#89861 = ORIENTED_EDGE('',*,*,#89381,.T.); +#89862 = ORIENTED_EDGE('',*,*,#89310,.T.); +#89863 = ORIENTED_EDGE('',*,*,#89846,.T.); +#89864 = PLANE('',#89865); +#89865 = AXIS2_PLACEMENT_3D('',#89866,#89867,#89868); +#89866 = CARTESIAN_POINT('',(4.041334437186E-16,3.3,0.85)); +#89867 = DIRECTION('',(0.,0.,1.)); +#89868 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89869 = ADVANCED_FACE('',(#89870),#89882,.T.); +#89870 = FACE_BOUND('',#89871,.T.); +#89871 = EDGE_LOOP('',(#89872,#89873,#89874,#89881)); +#89872 = ORIENTED_EDGE('',*,*,#89510,.F.); +#89873 = ORIENTED_EDGE('',*,*,#89587,.T.); +#89874 = ORIENTED_EDGE('',*,*,#89875,.F.); +#89875 = EDGE_CURVE('',#89409,#89588,#89876,.T.); +#89876 = CIRCLE('',#89877,0.4); +#89877 = AXIS2_PLACEMENT_3D('',#89878,#89879,#89880); +#89878 = CARTESIAN_POINT('',(2.9,2.9,1.15)); +#89879 = DIRECTION('',(0.,0.,-1.)); +#89880 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89881 = ORIENTED_EDGE('',*,*,#89416,.T.); +#89882 = PLANE('',#89883); +#89883 = AXIS2_PLACEMENT_3D('',#89884,#89885,#89886); +#89884 = CARTESIAN_POINT('',(0.169665910187,-2.077808138351E-17,1.15)); +#89885 = DIRECTION('',(0.,0.,1.)); +#89886 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89887 = ADVANCED_FACE('',(#89888),#89894,.T.); +#89888 = FACE_BOUND('',#89889,.T.); +#89889 = EDGE_LOOP('',(#89890,#89891,#89892,#89893)); +#89890 = ORIENTED_EDGE('',*,*,#89408,.T.); +#89891 = ORIENTED_EDGE('',*,*,#89875,.T.); +#89892 = ORIENTED_EDGE('',*,*,#89595,.F.); +#89893 = ORIENTED_EDGE('',*,*,#89730,.F.); +#89894 = CYLINDRICAL_SURFACE('',#89895,0.4); +#89895 = AXIS2_PLACEMENT_3D('',#89896,#89897,#89898); +#89896 = CARTESIAN_POINT('',(2.9,2.9,0.15)); +#89897 = DIRECTION('',(0.,0.,1.)); +#89898 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#89899 = ADVANCED_FACE('',(#89900),#89912,.T.); +#89900 = FACE_BOUND('',#89901,.T.); +#89901 = EDGE_LOOP('',(#89902,#89903,#89910,#89911)); +#89902 = ORIENTED_EDGE('',*,*,#89570,.T.); +#89903 = ORIENTED_EDGE('',*,*,#89904,.T.); +#89904 = EDGE_CURVE('',#89571,#89457,#89905,.T.); +#89905 = CIRCLE('',#89906,0.4); +#89906 = AXIS2_PLACEMENT_3D('',#89907,#89908,#89909); +#89907 = CARTESIAN_POINT('',(2.9,-2.9,1.15)); +#89908 = DIRECTION('',(0.,0.,-1.)); +#89909 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89910 = ORIENTED_EDGE('',*,*,#89454,.F.); +#89911 = ORIENTED_EDGE('',*,*,#89698,.F.); +#89912 = CYLINDRICAL_SURFACE('',#89913,0.4); +#89913 = AXIS2_PLACEMENT_3D('',#89914,#89915,#89916); +#89914 = CARTESIAN_POINT('',(2.9,-2.9,0.15)); +#89915 = DIRECTION('',(0.,0.,1.)); +#89916 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89917 = ADVANCED_FACE('',(#89918),#89924,.T.); +#89918 = FACE_BOUND('',#89919,.T.); +#89919 = EDGE_LOOP('',(#89920,#89921,#89922,#89923)); +#89920 = ORIENTED_EDGE('',*,*,#89904,.F.); +#89921 = ORIENTED_EDGE('',*,*,#89578,.T.); +#89922 = ORIENTED_EDGE('',*,*,#89543,.F.); +#89923 = ORIENTED_EDGE('',*,*,#89496,.T.); +#89924 = PLANE('',#89925); +#89925 = AXIS2_PLACEMENT_3D('',#89926,#89927,#89928); +#89926 = CARTESIAN_POINT('',(0.169665910187,-2.077808138351E-17,1.15)); +#89927 = DIRECTION('',(0.,0.,1.)); +#89928 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89929 = ADVANCED_FACE('',(#89930),#89955,.T.); +#89930 = FACE_BOUND('',#89931,.T.); +#89931 = EDGE_LOOP('',(#89932,#89940,#89948,#89954)); +#89932 = ORIENTED_EDGE('',*,*,#89933,.T.); +#89933 = EDGE_CURVE('',#89563,#89934,#89936,.T.); +#89934 = VERTEX_POINT('',#89935); +#89935 = CARTESIAN_POINT('',(3.9,-0.325,0.15)); +#89936 = LINE('',#89937,#89938); +#89937 = CARTESIAN_POINT('',(1.225,-0.325,0.15)); +#89938 = VECTOR('',#89939,1.); +#89939 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#89940 = ORIENTED_EDGE('',*,*,#89941,.T.); +#89941 = EDGE_CURVE('',#89934,#89942,#89944,.T.); +#89942 = VERTEX_POINT('',#89943); +#89943 = CARTESIAN_POINT('',(3.9,0.325,0.15)); +#89944 = LINE('',#89945,#89946); +#89945 = CARTESIAN_POINT('',(3.9,-0.325,0.15)); +#89946 = VECTOR('',#89947,1.); +#89947 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#89948 = ORIENTED_EDGE('',*,*,#89949,.T.); +#89949 = EDGE_CURVE('',#89942,#89604,#89950,.T.); +#89950 = LINE('',#89951,#89952); +#89951 = CARTESIAN_POINT('',(3.9,0.325,0.15)); +#89952 = VECTOR('',#89953,1.); +#89953 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#89954 = ORIENTED_EDGE('',*,*,#89611,.F.); +#89955 = PLANE('',#89956); +#89956 = AXIS2_PLACEMENT_3D('',#89957,#89958,#89959); +#89957 = CARTESIAN_POINT('',(2.47395012666,-5.900258447925E-16,0.15)); +#89958 = DIRECTION('',(0.,0.,1.)); +#89959 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#89960 = ADVANCED_FACE('',(#89961),#90007,.T.); +#89961 = FACE_BOUND('',#89962,.T.); +#89962 = EDGE_LOOP('',(#89963,#89964,#89972,#89981,#89990,#89999,#90006) + ); +#89963 = ORIENTED_EDGE('',*,*,#89633,.F.); +#89964 = ORIENTED_EDGE('',*,*,#89965,.T.); +#89965 = EDGE_CURVE('',#89626,#89966,#89968,.T.); +#89966 = VERTEX_POINT('',#89967); +#89967 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,7.28)); +#89968 = LINE('',#89969,#89970); +#89969 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.563333333333)); +#89970 = VECTOR('',#89971,1.); +#89971 = DIRECTION('',(0.,0.,1.)); +#89972 = ORIENTED_EDGE('',*,*,#89973,.T.); +#89973 = EDGE_CURVE('',#89966,#89974,#89976,.T.); +#89974 = VERTEX_POINT('',#89975); +#89975 = CARTESIAN_POINT('',(0.945,3.004908484463,7.28)); +#89976 = CIRCLE('',#89977,3.15); +#89977 = AXIS2_PLACEMENT_3D('',#89978,#89979,#89980); +#89978 = CARTESIAN_POINT('',(0.,0.,7.28)); +#89979 = DIRECTION('',(0.,0.,-1.)); +#89980 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89981 = ORIENTED_EDGE('',*,*,#89982,.T.); +#89982 = EDGE_CURVE('',#89974,#89983,#89985,.T.); +#89983 = VERTEX_POINT('',#89984); +#89984 = CARTESIAN_POINT('',(3.15,3.20055036432E-08,7.28)); +#89985 = CIRCLE('',#89986,3.15); +#89986 = AXIS2_PLACEMENT_3D('',#89987,#89988,#89989); +#89987 = CARTESIAN_POINT('',(0.,0.,7.28)); +#89988 = DIRECTION('',(0.,0.,-1.)); +#89989 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89990 = ORIENTED_EDGE('',*,*,#89991,.T.); +#89991 = EDGE_CURVE('',#89983,#89992,#89994,.T.); +#89992 = VERTEX_POINT('',#89993); +#89993 = CARTESIAN_POINT('',(0.945,-3.004908484463,7.28)); +#89994 = CIRCLE('',#89995,3.15); +#89995 = AXIS2_PLACEMENT_3D('',#89996,#89997,#89998); +#89996 = CARTESIAN_POINT('',(0.,0.,7.28)); +#89997 = DIRECTION('',(0.,0.,-1.)); +#89998 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89999 = ORIENTED_EDGE('',*,*,#90000,.T.); +#90000 = EDGE_CURVE('',#89992,#89966,#90001,.T.); +#90001 = CIRCLE('',#90002,3.15); +#90002 = AXIS2_PLACEMENT_3D('',#90003,#90004,#90005); +#90003 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90004 = DIRECTION('',(0.,0.,-1.)); +#90005 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90006 = ORIENTED_EDGE('',*,*,#89965,.F.); +#90007 = CYLINDRICAL_SURFACE('',#90008,3.15); +#90008 = AXIS2_PLACEMENT_3D('',#90009,#90010,#90011); +#90009 = CARTESIAN_POINT('',(0.,0.,2.563333333333)); +#90010 = DIRECTION('',(0.,0.,1.)); +#90011 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90012 = ADVANCED_FACE('',(#90013),#90039,.F.); +#90013 = FACE_BOUND('',#90014,.F.); +#90014 = EDGE_LOOP('',(#90015,#90023,#90024,#90025,#90033)); +#90015 = ORIENTED_EDGE('',*,*,#90016,.T.); +#90016 = EDGE_CURVE('',#90017,#89810,#90019,.T.); +#90017 = VERTEX_POINT('',#90018); +#90018 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90019 = LINE('',#90020,#90021); +#90020 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90021 = VECTOR('',#90022,1.); +#90022 = DIRECTION('',(0.,0.,1.)); +#90023 = ORIENTED_EDGE('',*,*,#89817,.T.); +#90024 = ORIENTED_EDGE('',*,*,#89762,.T.); +#90025 = ORIENTED_EDGE('',*,*,#90026,.F.); +#90026 = EDGE_CURVE('',#90027,#89754,#90029,.T.); +#90027 = VERTEX_POINT('',#90028); +#90028 = CARTESIAN_POINT('',(-1.225,-0.325,0.)); +#90029 = LINE('',#90030,#90031); +#90030 = CARTESIAN_POINT('',(-1.225,-0.325,0.)); +#90031 = VECTOR('',#90032,1.); +#90032 = DIRECTION('',(0.,0.,1.)); +#90033 = ORIENTED_EDGE('',*,*,#90034,.F.); +#90034 = EDGE_CURVE('',#90017,#90027,#90035,.T.); +#90035 = LINE('',#90036,#90037); +#90036 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90037 = VECTOR('',#90038,1.); +#90038 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#90039 = PLANE('',#90040); +#90040 = AXIS2_PLACEMENT_3D('',#90041,#90042,#90043); +#90041 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90042 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#90043 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#90044 = ADVANCED_FACE('',(#90045),#90064,.T.); +#90045 = FACE_BOUND('',#90046,.T.); +#90046 = EDGE_LOOP('',(#90047,#90056,#90062,#90063)); +#90047 = ORIENTED_EDGE('',*,*,#90048,.T.); +#90048 = EDGE_CURVE('',#90027,#90049,#90051,.T.); +#90049 = VERTEX_POINT('',#90050); +#90050 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90051 = CIRCLE('',#90052,0.325); +#90052 = AXIS2_PLACEMENT_3D('',#90053,#90054,#90055); +#90053 = CARTESIAN_POINT('',(-1.225,1.500192328956E-16,0.)); +#90054 = DIRECTION('',(0.,0.,1.)); +#90055 = DIRECTION('',(-8.056788489148E-16,-1.,0.)); +#90056 = ORIENTED_EDGE('',*,*,#90057,.T.); +#90057 = EDGE_CURVE('',#90049,#89746,#90058,.T.); +#90058 = LINE('',#90059,#90060); +#90059 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90060 = VECTOR('',#90061,1.); +#90061 = DIRECTION('',(0.,0.,1.)); +#90062 = ORIENTED_EDGE('',*,*,#89753,.F.); +#90063 = ORIENTED_EDGE('',*,*,#90026,.F.); +#90064 = CYLINDRICAL_SURFACE('',#90065,0.325); +#90065 = AXIS2_PLACEMENT_3D('',#90066,#90067,#90068); +#90066 = CARTESIAN_POINT('',(-1.225,1.500192328956E-16,0.)); +#90067 = DIRECTION('',(0.,0.,-1.)); +#90068 = DIRECTION('',(-8.056788489148E-16,-1.,-0.)); +#90069 = ADVANCED_FACE('',(#90070),#90089,.F.); +#90070 = FACE_BOUND('',#90071,.F.); +#90071 = EDGE_LOOP('',(#90072,#90073,#90074,#90075,#90083)); +#90072 = ORIENTED_EDGE('',*,*,#90057,.T.); +#90073 = ORIENTED_EDGE('',*,*,#89745,.T.); +#90074 = ORIENTED_EDGE('',*,*,#89801,.T.); +#90075 = ORIENTED_EDGE('',*,*,#90076,.F.); +#90076 = EDGE_CURVE('',#90077,#89802,#90079,.T.); +#90077 = VERTEX_POINT('',#90078); +#90078 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90079 = LINE('',#90080,#90081); +#90080 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90081 = VECTOR('',#90082,1.); +#90082 = DIRECTION('',(0.,0.,1.)); +#90083 = ORIENTED_EDGE('',*,*,#90084,.F.); +#90084 = EDGE_CURVE('',#90049,#90077,#90085,.T.); +#90085 = LINE('',#90086,#90087); +#90086 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90087 = VECTOR('',#90088,1.); +#90088 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#90089 = PLANE('',#90090); +#90090 = AXIS2_PLACEMENT_3D('',#90091,#90092,#90093); +#90091 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90092 = DIRECTION('',(-1.432165121507E-16,-1.,0.)); +#90093 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#90094 = ADVANCED_FACE('',(#90095),#90121,.F.); +#90095 = FACE_BOUND('',#90096,.F.); +#90096 = EDGE_LOOP('',(#90097,#90105,#90106,#90107,#90115)); +#90097 = ORIENTED_EDGE('',*,*,#90098,.T.); +#90098 = EDGE_CURVE('',#90099,#89942,#90101,.T.); +#90099 = VERTEX_POINT('',#90100); +#90100 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90101 = LINE('',#90102,#90103); +#90102 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90103 = VECTOR('',#90104,1.); +#90104 = DIRECTION('',(0.,0.,1.)); +#90105 = ORIENTED_EDGE('',*,*,#89949,.T.); +#90106 = ORIENTED_EDGE('',*,*,#89723,.T.); +#90107 = ORIENTED_EDGE('',*,*,#90108,.F.); +#90108 = EDGE_CURVE('',#90109,#89715,#90111,.T.); +#90109 = VERTEX_POINT('',#90110); +#90110 = CARTESIAN_POINT('',(1.225,0.325,0.)); +#90111 = LINE('',#90112,#90113); +#90112 = CARTESIAN_POINT('',(1.225,0.325,0.)); +#90113 = VECTOR('',#90114,1.); +#90114 = DIRECTION('',(0.,0.,1.)); +#90115 = ORIENTED_EDGE('',*,*,#90116,.F.); +#90116 = EDGE_CURVE('',#90099,#90109,#90117,.T.); +#90117 = LINE('',#90118,#90119); +#90118 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90119 = VECTOR('',#90120,1.); +#90120 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#90121 = PLANE('',#90122); +#90122 = AXIS2_PLACEMENT_3D('',#90123,#90124,#90125); +#90123 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90124 = DIRECTION('',(-2.449293598295E-16,-1.,0.)); +#90125 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#90126 = ADVANCED_FACE('',(#90127),#90146,.T.); +#90127 = FACE_BOUND('',#90128,.T.); +#90128 = EDGE_LOOP('',(#90129,#90138,#90144,#90145)); +#90129 = ORIENTED_EDGE('',*,*,#90130,.T.); +#90130 = EDGE_CURVE('',#90109,#90131,#90133,.T.); +#90131 = VERTEX_POINT('',#90132); +#90132 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90133 = CIRCLE('',#90134,0.325); +#90134 = AXIS2_PLACEMENT_3D('',#90135,#90136,#90137); +#90135 = CARTESIAN_POINT('',(1.225,-3.000384657911E-16,0.)); +#90136 = DIRECTION('',(0.,-0.,1.)); +#90137 = DIRECTION('',(9.281435288296E-16,1.,0.)); +#90138 = ORIENTED_EDGE('',*,*,#90139,.T.); +#90139 = EDGE_CURVE('',#90131,#89707,#90140,.T.); +#90140 = LINE('',#90141,#90142); +#90141 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90142 = VECTOR('',#90143,1.); +#90143 = DIRECTION('',(0.,0.,1.)); +#90144 = ORIENTED_EDGE('',*,*,#89714,.F.); +#90145 = ORIENTED_EDGE('',*,*,#90108,.F.); +#90146 = CYLINDRICAL_SURFACE('',#90147,0.325); +#90147 = AXIS2_PLACEMENT_3D('',#90148,#90149,#90150); +#90148 = CARTESIAN_POINT('',(1.225,-3.000384657911E-16,0.)); +#90149 = DIRECTION('',(-0.,0.,-1.)); +#90150 = DIRECTION('',(9.281435288296E-16,1.,0.)); +#90151 = ADVANCED_FACE('',(#90152),#90171,.F.); +#90152 = FACE_BOUND('',#90153,.F.); +#90153 = EDGE_LOOP('',(#90154,#90155,#90156,#90157,#90165)); +#90154 = ORIENTED_EDGE('',*,*,#90139,.T.); +#90155 = ORIENTED_EDGE('',*,*,#89706,.T.); +#90156 = ORIENTED_EDGE('',*,*,#89933,.T.); +#90157 = ORIENTED_EDGE('',*,*,#90158,.F.); +#90158 = EDGE_CURVE('',#90159,#89934,#90161,.T.); +#90159 = VERTEX_POINT('',#90160); +#90160 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90161 = LINE('',#90162,#90163); +#90162 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90163 = VECTOR('',#90164,1.); +#90164 = DIRECTION('',(0.,0.,1.)); +#90165 = ORIENTED_EDGE('',*,*,#90166,.F.); +#90166 = EDGE_CURVE('',#90131,#90159,#90167,.T.); +#90167 = LINE('',#90168,#90169); +#90168 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90169 = VECTOR('',#90170,1.); +#90170 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#90171 = PLANE('',#90172); +#90172 = AXIS2_PLACEMENT_3D('',#90173,#90174,#90175); +#90173 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90174 = DIRECTION('',(2.656811920655E-16,1.,0.)); +#90175 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#90176 = ADVANCED_FACE('',(#90177),#90188,.F.); +#90177 = FACE_BOUND('',#90178,.F.); +#90178 = EDGE_LOOP('',(#90179,#90180,#90181,#90182)); +#90179 = ORIENTED_EDGE('',*,*,#90076,.T.); +#90180 = ORIENTED_EDGE('',*,*,#89809,.T.); +#90181 = ORIENTED_EDGE('',*,*,#90016,.F.); +#90182 = ORIENTED_EDGE('',*,*,#90183,.F.); +#90183 = EDGE_CURVE('',#90077,#90017,#90184,.T.); +#90184 = LINE('',#90185,#90186); +#90185 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90186 = VECTOR('',#90187,1.); +#90187 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#90188 = PLANE('',#90189); +#90189 = AXIS2_PLACEMENT_3D('',#90190,#90191,#90192); +#90190 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90191 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#90192 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#90193 = ADVANCED_FACE('',(#90194),#90205,.F.); +#90194 = FACE_BOUND('',#90195,.F.); +#90195 = EDGE_LOOP('',(#90196,#90197,#90198,#90199)); +#90196 = ORIENTED_EDGE('',*,*,#90158,.T.); +#90197 = ORIENTED_EDGE('',*,*,#89941,.T.); +#90198 = ORIENTED_EDGE('',*,*,#90098,.F.); +#90199 = ORIENTED_EDGE('',*,*,#90200,.F.); +#90200 = EDGE_CURVE('',#90159,#90099,#90201,.T.); +#90201 = LINE('',#90202,#90203); +#90202 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90203 = VECTOR('',#90204,1.); +#90204 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#90205 = PLANE('',#90206); +#90206 = AXIS2_PLACEMENT_3D('',#90207,#90208,#90209); +#90207 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90208 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#90209 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#90210 = ADVANCED_FACE('',(#90211),#90253,.T.); +#90211 = FACE_BOUND('',#90212,.T.); +#90212 = EDGE_LOOP('',(#90213,#90224,#90245,#90246)); +#90213 = ORIENTED_EDGE('',*,*,#90214,.T.); +#90214 = EDGE_CURVE('',#90215,#90217,#90219,.T.); +#90215 = VERTEX_POINT('',#90216); +#90216 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,7.7)); +#90217 = VERTEX_POINT('',#90218); +#90218 = CARTESIAN_POINT('',(0.945,2.561225292707,7.7)); +#90219 = CIRCLE('',#90220,2.73); +#90220 = AXIS2_PLACEMENT_3D('',#90221,#90222,#90223); +#90221 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90222 = DIRECTION('',(0.,0.,-1.)); +#90223 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90224 = ORIENTED_EDGE('',*,*,#90225,.F.); +#90225 = EDGE_CURVE('',#89974,#90217,#90226,.T.); +#90226 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#90227,#90228,#90229,#90230, + #90231,#90232,#90233,#90234,#90235,#90236,#90237,#90238,#90239, + #90240,#90241,#90242,#90243,#90244),.UNSPECIFIED.,.F.,.F.,(6,4,4,4,6 + ),(0.,0.249577466955,0.497599275591,0.74730978514,1.), + .UNSPECIFIED.); +#90227 = CARTESIAN_POINT('',(0.945,3.004908484463,7.28)); +#90228 = CARTESIAN_POINT('',(0.945,3.00490848098,7.313228015972)); +#90229 = CARTESIAN_POINT('',(0.945,3.001463821946,7.346456730622)); +#90230 = CARTESIAN_POINT('',(0.945,2.994574119979,7.379237505919)); +#90231 = CARTESIAN_POINT('',(0.945,2.984338296282,7.411126992482)); +#90232 = CARTESIAN_POINT('',(0.945,2.957631160106,7.472127049006)); +#90233 = CARTESIAN_POINT('',(0.945,2.941198599864,7.501254840031)); +#90234 = CARTESIAN_POINT('',(0.945,2.921827872491,7.528710244247)); +#90235 = CARTESIAN_POINT('',(0.945,2.899782785018,7.554145479611)); +#90236 = CARTESIAN_POINT('',(0.945,2.850815155175,7.600572655349)); +#90237 = CARTESIAN_POINT('',(0.945,2.823859719074,7.62153380299)); +#90238 = CARTESIAN_POINT('',(0.945,2.794840653888,7.63987747649)); +#90239 = CARTESIAN_POINT('',(0.945,2.764133571656,7.655390822856)); +#90240 = CARTESIAN_POINT('',(0.945,2.699757531029,7.680632446489)); +#90241 = CARTESIAN_POINT('',(0.945,2.666057065744,7.690289667083)); +#90242 = CARTESIAN_POINT('',(0.945,2.631447275386,7.696766294835)); +#90243 = CARTESIAN_POINT('',(0.945,2.596359892027,7.699999996714)); +#90244 = CARTESIAN_POINT('',(0.945,2.561225292707,7.7)); +#90245 = ORIENTED_EDGE('',*,*,#89973,.F.); +#90246 = ORIENTED_EDGE('',*,*,#90247,.T.); +#90247 = EDGE_CURVE('',#89966,#90215,#90248,.T.); +#90248 = CIRCLE('',#90249,0.42); +#90249 = AXIS2_PLACEMENT_3D('',#90250,#90251,#90252); +#90250 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,7.28)); +#90251 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#90252 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90253 = TOROIDAL_SURFACE('',#90254,2.73,0.42); +#90254 = AXIS2_PLACEMENT_3D('',#90255,#90256,#90257); +#90255 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90256 = DIRECTION('',(0.,0.,1.)); +#90257 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90258 = ADVANCED_FACE('',(#90259),#90294,.T.); +#90259 = FACE_BOUND('',#90260,.T.); +#90260 = EDGE_LOOP('',(#90261,#90270,#90291,#90292,#90293)); +#90261 = ORIENTED_EDGE('',*,*,#90262,.T.); +#90262 = EDGE_CURVE('',#90217,#90263,#90265,.T.); +#90263 = VERTEX_POINT('',#90264); +#90264 = CARTESIAN_POINT('',(0.945,-2.561225292707,7.7)); +#90265 = CIRCLE('',#90266,2.73); +#90266 = AXIS2_PLACEMENT_3D('',#90267,#90268,#90269); +#90267 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90268 = DIRECTION('',(0.,0.,-1.)); +#90269 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90270 = ORIENTED_EDGE('',*,*,#90271,.F.); +#90271 = EDGE_CURVE('',#89992,#90263,#90272,.T.); +#90272 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#90273,#90274,#90275,#90276, + #90277,#90278,#90279,#90280,#90281,#90282,#90283,#90284,#90285, + #90286,#90287,#90288,#90289,#90290),.UNSPECIFIED.,.F.,.F.,(6,4,4,4,6 + ),(0.,0.249577466959,0.497599275595,0.747309785144,1.), + .UNSPECIFIED.); +#90273 = CARTESIAN_POINT('',(0.945,-3.004908484463,7.28)); +#90274 = CARTESIAN_POINT('',(0.945,-3.00490848098,7.313228015972)); +#90275 = CARTESIAN_POINT('',(0.945,-3.001463821946,7.346456730623)); +#90276 = CARTESIAN_POINT('',(0.945,-2.994574119979,7.37923750592)); +#90277 = CARTESIAN_POINT('',(0.945,-2.984338296281,7.411126992484)); +#90278 = CARTESIAN_POINT('',(0.945,-2.957631160105,7.472127049008)); +#90279 = CARTESIAN_POINT('',(0.945,-2.941198599863,7.501254840033)); +#90280 = CARTESIAN_POINT('',(0.945,-2.921827872489,7.528710244249)); +#90281 = CARTESIAN_POINT('',(0.945,-2.899782785017,7.554145479613)); +#90282 = CARTESIAN_POINT('',(0.945,-2.850815155173,7.600572655351)); +#90283 = CARTESIAN_POINT('',(0.945,-2.823859719072,7.621533802992)); +#90284 = CARTESIAN_POINT('',(0.945,-2.794840653886,7.639877476491)); +#90285 = CARTESIAN_POINT('',(0.945,-2.764133571654,7.655390822857)); +#90286 = CARTESIAN_POINT('',(0.945,-2.699757531027,7.680632446489)); +#90287 = CARTESIAN_POINT('',(0.945,-2.666057065743,7.690289667083)); +#90288 = CARTESIAN_POINT('',(0.945,-2.631447275385,7.696766294835)); +#90289 = CARTESIAN_POINT('',(0.945,-2.596359892027,7.699999996714)); +#90290 = CARTESIAN_POINT('',(0.945,-2.561225292707,7.7)); +#90291 = ORIENTED_EDGE('',*,*,#89991,.F.); +#90292 = ORIENTED_EDGE('',*,*,#89982,.F.); +#90293 = ORIENTED_EDGE('',*,*,#90225,.T.); +#90294 = TOROIDAL_SURFACE('',#90295,2.73,0.42); +#90295 = AXIS2_PLACEMENT_3D('',#90296,#90297,#90298); +#90296 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90297 = DIRECTION('',(0.,0.,1.)); +#90298 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90299 = ADVANCED_FACE('',(#90300),#90312,.T.); +#90300 = FACE_BOUND('',#90301,.T.); +#90301 = EDGE_LOOP('',(#90302,#90303,#90310,#90311)); +#90302 = ORIENTED_EDGE('',*,*,#90271,.T.); +#90303 = ORIENTED_EDGE('',*,*,#90304,.T.); +#90304 = EDGE_CURVE('',#90263,#90215,#90305,.T.); +#90305 = CIRCLE('',#90306,2.73); +#90306 = AXIS2_PLACEMENT_3D('',#90307,#90308,#90309); +#90307 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90308 = DIRECTION('',(0.,0.,-1.)); +#90309 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90310 = ORIENTED_EDGE('',*,*,#90247,.F.); +#90311 = ORIENTED_EDGE('',*,*,#90000,.F.); +#90312 = TOROIDAL_SURFACE('',#90313,2.73,0.42); +#90313 = AXIS2_PLACEMENT_3D('',#90314,#90315,#90316); +#90314 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90315 = DIRECTION('',(0.,0.,1.)); +#90316 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90317 = ADVANCED_FACE('',(#90318),#90324,.F.); +#90318 = FACE_BOUND('',#90319,.F.); +#90319 = EDGE_LOOP('',(#90320,#90321,#90322,#90323)); +#90320 = ORIENTED_EDGE('',*,*,#90183,.T.); +#90321 = ORIENTED_EDGE('',*,*,#90034,.T.); +#90322 = ORIENTED_EDGE('',*,*,#90048,.T.); +#90323 = ORIENTED_EDGE('',*,*,#90084,.T.); +#90324 = PLANE('',#90325); +#90325 = AXIS2_PLACEMENT_3D('',#90326,#90327,#90328); +#90326 = CARTESIAN_POINT('',(-2.47395012666,2.870543344061E-16,0.)); +#90327 = DIRECTION('',(0.,0.,1.)); +#90328 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90329 = ADVANCED_FACE('',(#90330),#90336,.F.); +#90330 = FACE_BOUND('',#90331,.F.); +#90331 = EDGE_LOOP('',(#90332,#90333,#90334,#90335)); +#90332 = ORIENTED_EDGE('',*,*,#90200,.T.); +#90333 = ORIENTED_EDGE('',*,*,#90116,.T.); +#90334 = ORIENTED_EDGE('',*,*,#90130,.T.); +#90335 = ORIENTED_EDGE('',*,*,#90166,.T.); +#90336 = PLANE('',#90337); +#90337 = AXIS2_PLACEMENT_3D('',#90338,#90339,#90340); +#90338 = CARTESIAN_POINT('',(2.47395012666,-5.900258447925E-16,0.)); +#90339 = DIRECTION('',(0.,0.,1.)); +#90340 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#90341 = ADVANCED_FACE('',(#90342),#90352,.F.); +#90342 = FACE_BOUND('',#90343,.F.); +#90343 = EDGE_LOOP('',(#90344,#90345,#90346)); +#90344 = ORIENTED_EDGE('',*,*,#90304,.T.); +#90345 = ORIENTED_EDGE('',*,*,#90214,.T.); +#90346 = ORIENTED_EDGE('',*,*,#90347,.T.); +#90347 = EDGE_CURVE('',#90217,#90263,#90348,.T.); +#90348 = LINE('',#90349,#90350); +#90349 = CARTESIAN_POINT('',(0.945,3.15,7.7)); +#90350 = VECTOR('',#90351,1.); +#90351 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#90352 = PLANE('',#90353); +#90353 = AXIS2_PLACEMENT_3D('',#90354,#90355,#90356); +#90354 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90355 = DIRECTION('',(-0.,0.,-1.)); +#90356 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90357 = ADVANCED_FACE('',(#90358),#90362,.T.); +#90358 = FACE_BOUND('',#90359,.T.); +#90359 = EDGE_LOOP('',(#90360,#90361)); +#90360 = ORIENTED_EDGE('',*,*,#90262,.F.); +#90361 = ORIENTED_EDGE('',*,*,#90347,.T.); +#90362 = PLANE('',#90363); +#90363 = AXIS2_PLACEMENT_3D('',#90364,#90365,#90366); +#90364 = CARTESIAN_POINT('',(3.15,3.15,7.7)); +#90365 = DIRECTION('',(0.,0.,1.)); +#90366 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#90371)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#90368,#90369,#90370)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#90368 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#90369 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#90370 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#90371 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#90368, + 'distance_accuracy_value','confusion accuracy'); +#90372 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90373,#90375); +#90373 = ( REPRESENTATION_RELATIONSHIP('','',#89001,#88978) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90374) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90374 = ITEM_DEFINED_TRANSFORMATION('','',#11,#88979); +#90375 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90376); +#90376 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('102','=>[0:1:1:47]','',#88973, + #88996,$); +#90377 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#88998)); +#90378 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90379,#90381); +#90379 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90380) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90380 = ITEM_DEFINED_TRANSFORMATION('','',#11,#335); +#90381 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90382); +#90382 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('104','DzG','',#5,#36156,$); +#90383 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90384,#90386); +#90384 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90385) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90385 = ITEM_DEFINED_TRANSFORMATION('','',#11,#339); +#90386 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90387); +#90387 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('105','R40','',#5,#523,$); +#90388 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90389,#90391); +#90389 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90390) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90390 = ITEM_DEFINED_TRANSFORMATION('','',#11,#343); +#90391 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90392); +#90392 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('106','R42','',#5,#523,$); +#90393 = SHAPE_DEFINITION_REPRESENTATION(#90394,#90400); +#90394 = PRODUCT_DEFINITION_SHAPE('','',#90395); +#90395 = PRODUCT_DEFINITION('design','',#90396,#90399); +#90396 = PRODUCT_DEFINITION_FORMATION('','',#90397); +#90397 = PRODUCT('QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm', + 'QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm','',(#90398)); +#90398 = PRODUCT_CONTEXT('',#2,'mechanical'); +#90399 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#90400 = SHAPE_REPRESENTATION('',(#11,#90401),#90405); +#90401 = AXIS2_PLACEMENT_3D('',#90402,#90403,#90404); +#90402 = CARTESIAN_POINT('',(0.,0.,0.)); +#90403 = DIRECTION('',(0.,0.,1.)); +#90404 = DIRECTION('',(1.,0.,-0.)); +#90405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#90409)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#90406,#90407,#90408)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#90406 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#90407 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#90408 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#90409 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#90406, + 'distance_accuracy_value','confusion accuracy'); +#90410 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90411,#90413); +#90411 = ( REPRESENTATION_RELATIONSHIP('','',#90400,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90412) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90412 = ITEM_DEFINED_TRANSFORMATION('','',#11,#347); +#90413 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90414); +#90414 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('108','U6','',#5,#90395,$); +#90415 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#90397)); +#90416 = SHAPE_DEFINITION_REPRESENTATION(#90417,#90423); +#90417 = PRODUCT_DEFINITION_SHAPE('','',#90418); +#90418 = PRODUCT_DEFINITION('design','',#90419,#90422); +#90419 = PRODUCT_DEFINITION_FORMATION('','',#90420); +#90420 = PRODUCT('QFN-24-1EP_4x5mm_Pitch0.5mm', + 'QFN-24-1EP_4x5mm_Pitch0.5mm','',(#90421)); +#90421 = PRODUCT_CONTEXT('',#2,'mechanical'); +#90422 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#90423 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#90424),#95594); +#90424 = MANIFOLD_SOLID_BREP('',#90425); +#90425 = CLOSED_SHELL('',(#90426,#90467,#90514,#90539,#90579,#90596, + #91446,#91578,#91590,#91775,#91815,#91840,#91873,#91913,#91953, + #91978,#92003,#92036,#92069,#92109,#92149,#92174,#92199,#92232, + #92265,#92305,#92345,#92370,#92395,#92428,#92461,#92501,#92541, + #92566,#92591,#92624,#92657,#92842,#92882,#92922,#92947,#92972, + #93005,#93038,#93078,#93118,#93143,#93168,#93201,#93234,#93366, + #93406,#93446,#93471,#93496,#93529,#93562,#93602,#93642,#93667, + #93692,#93725,#93758,#93798,#93838,#93863,#93888,#93921,#93954, + #93994,#94034,#94059,#94084,#94117,#94150,#94190,#94230,#94255, + #94280,#94313,#94346,#94377,#94401,#94425,#94449,#94466,#94489, + #94506,#94523,#94540,#94557,#94574,#94591,#94608,#94625,#94642, + #94659,#94676,#94693,#94705,#94722,#94734,#94751,#94763,#94780, + #94792,#94809,#94821,#94838,#94850,#94867,#94879,#94896,#94908, + #94925,#94937,#94954,#94971,#94988,#95005,#95022,#95039,#95056, + #95073,#95085,#95102,#95114,#95131,#95143,#95160,#95172,#95189, + #95206,#95223,#95240,#95257,#95274,#95286,#95303,#95315,#95332, + #95344,#95361,#95373,#95390,#95402,#95419,#95431,#95448,#95460, + #95477,#95489,#95506,#95518,#95535,#95547,#95560,#95585)); +#90426 = ADVANCED_FACE('',(#90427),#90462,.T.); +#90427 = FACE_BOUND('',#90428,.F.); +#90428 = EDGE_LOOP('',(#90429,#90439,#90448,#90456)); +#90429 = ORIENTED_EDGE('',*,*,#90430,.T.); +#90430 = EDGE_CURVE('',#90431,#90433,#90435,.T.); +#90431 = VERTEX_POINT('',#90432); +#90432 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90433 = VERTEX_POINT('',#90434); +#90434 = CARTESIAN_POINT('',(-1.125,2.225,0.)); +#90435 = LINE('',#90436,#90437); +#90436 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90437 = VECTOR('',#90438,1.); +#90438 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90439 = ORIENTED_EDGE('',*,*,#90440,.T.); +#90440 = EDGE_CURVE('',#90433,#90441,#90443,.T.); +#90441 = VERTEX_POINT('',#90442); +#90442 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90443 = CIRCLE('',#90444,0.125); +#90444 = AXIS2_PLACEMENT_3D('',#90445,#90446,#90447); +#90445 = CARTESIAN_POINT('',(-1.,2.225,0.)); +#90446 = DIRECTION('',(0.,0.,1.)); +#90447 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90448 = ORIENTED_EDGE('',*,*,#90449,.T.); +#90449 = EDGE_CURVE('',#90441,#90450,#90452,.T.); +#90450 = VERTEX_POINT('',#90451); +#90451 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90452 = LINE('',#90453,#90454); +#90453 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90454 = VECTOR('',#90455,1.); +#90455 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90456 = ORIENTED_EDGE('',*,*,#90457,.T.); +#90457 = EDGE_CURVE('',#90450,#90431,#90458,.T.); +#90458 = LINE('',#90459,#90460); +#90459 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90460 = VECTOR('',#90461,1.); +#90461 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90462 = PLANE('',#90463); +#90463 = AXIS2_PLACEMENT_3D('',#90464,#90465,#90466); +#90464 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90465 = DIRECTION('',(-0.,0.,-1.)); +#90466 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#90467 = ADVANCED_FACE('',(#90468),#90509,.F.); +#90468 = FACE_BOUND('',#90469,.F.); +#90469 = EDGE_LOOP('',(#90470,#90471,#90479,#90487,#90495,#90503)); +#90470 = ORIENTED_EDGE('',*,*,#90430,.F.); +#90471 = ORIENTED_EDGE('',*,*,#90472,.T.); +#90472 = EDGE_CURVE('',#90431,#90473,#90475,.T.); +#90473 = VERTEX_POINT('',#90474); +#90474 = CARTESIAN_POINT('',(-1.125,2.5,0.2)); +#90475 = LINE('',#90476,#90477); +#90476 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90477 = VECTOR('',#90478,1.); +#90478 = DIRECTION('',(0.,0.,1.)); +#90479 = ORIENTED_EDGE('',*,*,#90480,.T.); +#90480 = EDGE_CURVE('',#90473,#90481,#90483,.T.); +#90481 = VERTEX_POINT('',#90482); +#90482 = CARTESIAN_POINT('',(-1.125,2.49,0.2)); +#90483 = LINE('',#90484,#90485); +#90484 = CARTESIAN_POINT('',(-1.125,2.5,0.2)); +#90485 = VECTOR('',#90486,1.); +#90486 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90487 = ORIENTED_EDGE('',*,*,#90488,.F.); +#90488 = EDGE_CURVE('',#90489,#90481,#90491,.T.); +#90489 = VERTEX_POINT('',#90490); +#90490 = CARTESIAN_POINT('',(-1.125,2.49,2.E-02)); +#90491 = LINE('',#90492,#90493); +#90492 = CARTESIAN_POINT('',(-1.125,2.49,1.E-02)); +#90493 = VECTOR('',#90494,1.); +#90494 = DIRECTION('',(0.,0.,1.)); +#90495 = ORIENTED_EDGE('',*,*,#90496,.F.); +#90496 = EDGE_CURVE('',#90497,#90489,#90499,.T.); +#90497 = VERTEX_POINT('',#90498); +#90498 = CARTESIAN_POINT('',(-1.125,2.225,2.E-02)); +#90499 = LINE('',#90500,#90501); +#90500 = CARTESIAN_POINT('',(-1.125,2.495,2.E-02)); +#90501 = VECTOR('',#90502,1.); +#90502 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90503 = ORIENTED_EDGE('',*,*,#90504,.F.); +#90504 = EDGE_CURVE('',#90433,#90497,#90505,.T.); +#90505 = LINE('',#90506,#90507); +#90506 = CARTESIAN_POINT('',(-1.125,2.225,0.)); +#90507 = VECTOR('',#90508,1.); +#90508 = DIRECTION('',(0.,0.,1.)); +#90509 = PLANE('',#90510); +#90510 = AXIS2_PLACEMENT_3D('',#90511,#90512,#90513); +#90511 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90512 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#90513 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90514 = ADVANCED_FACE('',(#90515),#90534,.T.); +#90515 = FACE_BOUND('',#90516,.T.); +#90516 = EDGE_LOOP('',(#90517,#90525,#90532,#90533)); +#90517 = ORIENTED_EDGE('',*,*,#90518,.T.); +#90518 = EDGE_CURVE('',#90441,#90519,#90521,.T.); +#90519 = VERTEX_POINT('',#90520); +#90520 = CARTESIAN_POINT('',(-0.875,2.225,2.E-02)); +#90521 = LINE('',#90522,#90523); +#90522 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90523 = VECTOR('',#90524,1.); +#90524 = DIRECTION('',(0.,0.,1.)); +#90525 = ORIENTED_EDGE('',*,*,#90526,.T.); +#90526 = EDGE_CURVE('',#90519,#90497,#90527,.T.); +#90527 = CIRCLE('',#90528,0.125); +#90528 = AXIS2_PLACEMENT_3D('',#90529,#90530,#90531); +#90529 = CARTESIAN_POINT('',(-1.,2.225,2.E-02)); +#90530 = DIRECTION('',(0.,0.,-1.)); +#90531 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90532 = ORIENTED_EDGE('',*,*,#90504,.F.); +#90533 = ORIENTED_EDGE('',*,*,#90440,.T.); +#90534 = CYLINDRICAL_SURFACE('',#90535,0.125); +#90535 = AXIS2_PLACEMENT_3D('',#90536,#90537,#90538); +#90536 = CARTESIAN_POINT('',(-1.,2.225,0.)); +#90537 = DIRECTION('',(0.,0.,-1.)); +#90538 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90539 = ADVANCED_FACE('',(#90540),#90574,.F.); +#90540 = FACE_BOUND('',#90541,.F.); +#90541 = EDGE_LOOP('',(#90542,#90543,#90544,#90552,#90560,#90568)); +#90542 = ORIENTED_EDGE('',*,*,#90449,.F.); +#90543 = ORIENTED_EDGE('',*,*,#90518,.T.); +#90544 = ORIENTED_EDGE('',*,*,#90545,.F.); +#90545 = EDGE_CURVE('',#90546,#90519,#90548,.T.); +#90546 = VERTEX_POINT('',#90547); +#90547 = CARTESIAN_POINT('',(-0.875,2.49,2.E-02)); +#90548 = LINE('',#90549,#90550); +#90549 = CARTESIAN_POINT('',(-0.875,2.3575,2.E-02)); +#90550 = VECTOR('',#90551,1.); +#90551 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90552 = ORIENTED_EDGE('',*,*,#90553,.F.); +#90553 = EDGE_CURVE('',#90554,#90546,#90556,.T.); +#90554 = VERTEX_POINT('',#90555); +#90555 = CARTESIAN_POINT('',(-0.875,2.49,0.2)); +#90556 = LINE('',#90557,#90558); +#90557 = CARTESIAN_POINT('',(-0.875,2.49,1.E-02)); +#90558 = VECTOR('',#90559,1.); +#90559 = DIRECTION('',(-0.,0.,-1.)); +#90560 = ORIENTED_EDGE('',*,*,#90561,.T.); +#90561 = EDGE_CURVE('',#90554,#90562,#90564,.T.); +#90562 = VERTEX_POINT('',#90563); +#90563 = CARTESIAN_POINT('',(-0.875,2.5,0.2)); +#90564 = LINE('',#90565,#90566); +#90565 = CARTESIAN_POINT('',(-0.875,2.225,0.2)); +#90566 = VECTOR('',#90567,1.); +#90567 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90568 = ORIENTED_EDGE('',*,*,#90569,.F.); +#90569 = EDGE_CURVE('',#90450,#90562,#90570,.T.); +#90570 = LINE('',#90571,#90572); +#90571 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90572 = VECTOR('',#90573,1.); +#90573 = DIRECTION('',(0.,0.,1.)); +#90574 = PLANE('',#90575); +#90575 = AXIS2_PLACEMENT_3D('',#90576,#90577,#90578); +#90576 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90577 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90578 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90579 = ADVANCED_FACE('',(#90580),#90591,.F.); +#90580 = FACE_BOUND('',#90581,.F.); +#90581 = EDGE_LOOP('',(#90582,#90583,#90589,#90590)); +#90582 = ORIENTED_EDGE('',*,*,#90569,.T.); +#90583 = ORIENTED_EDGE('',*,*,#90584,.T.); +#90584 = EDGE_CURVE('',#90562,#90473,#90585,.T.); +#90585 = LINE('',#90586,#90587); +#90586 = CARTESIAN_POINT('',(-0.875,2.5,0.2)); +#90587 = VECTOR('',#90588,1.); +#90588 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90589 = ORIENTED_EDGE('',*,*,#90472,.F.); +#90590 = ORIENTED_EDGE('',*,*,#90457,.F.); +#90591 = PLANE('',#90592); +#90592 = AXIS2_PLACEMENT_3D('',#90593,#90594,#90595); +#90593 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90594 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90595 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90596 = ADVANCED_FACE('',(#90597,#91399),#91441,.F.); +#90597 = FACE_BOUND('',#90598,.F.); +#90598 = EDGE_LOOP('',(#90599,#90607,#90615,#90623,#90632,#90640,#90648, + #90656,#90665,#90673,#90681,#90689,#90698,#90706,#90714,#90722, + #90731,#90739,#90747,#90755,#90764,#90772,#90780,#90788,#90797, + #90805,#90813,#90821,#90830,#90838,#90846,#90854,#90862,#90871, + #90879,#90887,#90895,#90904,#90912,#90920,#90928,#90937,#90945, + #90953,#90961,#90970,#90978,#90986,#90994,#91003,#91011,#91019, + #91027,#91035,#91044,#91052,#91060,#91068,#91077,#91085,#91093, + #91101,#91110,#91118,#91126,#91134,#91143,#91151,#91159,#91167, + #91176,#91184,#91192,#91200,#91209,#91217,#91225,#91233,#91242, + #91250,#91258,#91266,#91274,#91283,#91291,#91299,#91307,#91316, + #91324,#91332,#91340,#91349,#91357,#91365,#91373,#91382,#91390, + #91396,#91397,#91398)); +#90599 = ORIENTED_EDGE('',*,*,#90600,.F.); +#90600 = EDGE_CURVE('',#90601,#90489,#90603,.T.); +#90601 = VERTEX_POINT('',#90602); +#90602 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90603 = LINE('',#90604,#90605); +#90604 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90605 = VECTOR('',#90606,1.); +#90606 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90607 = ORIENTED_EDGE('',*,*,#90608,.T.); +#90608 = EDGE_CURVE('',#90601,#90609,#90611,.T.); +#90609 = VERTEX_POINT('',#90610); +#90610 = CARTESIAN_POINT('',(-1.99,1.625,2.E-02)); +#90611 = LINE('',#90612,#90613); +#90612 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90613 = VECTOR('',#90614,1.); +#90614 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90615 = ORIENTED_EDGE('',*,*,#90616,.T.); +#90616 = EDGE_CURVE('',#90609,#90617,#90619,.T.); +#90617 = VERTEX_POINT('',#90618); +#90618 = CARTESIAN_POINT('',(-1.725,1.625,2.E-02)); +#90619 = LINE('',#90620,#90621); +#90620 = CARTESIAN_POINT('',(-1.8575,1.625,2.E-02)); +#90621 = VECTOR('',#90622,1.); +#90622 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90623 = ORIENTED_EDGE('',*,*,#90624,.T.); +#90624 = EDGE_CURVE('',#90617,#90625,#90627,.T.); +#90625 = VERTEX_POINT('',#90626); +#90626 = CARTESIAN_POINT('',(-1.725,1.375,2.E-02)); +#90627 = CIRCLE('',#90628,0.125); +#90628 = AXIS2_PLACEMENT_3D('',#90629,#90630,#90631); +#90629 = CARTESIAN_POINT('',(-1.725,1.5,2.E-02)); +#90630 = DIRECTION('',(-0.,0.,-1.)); +#90631 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90632 = ORIENTED_EDGE('',*,*,#90633,.T.); +#90633 = EDGE_CURVE('',#90625,#90634,#90636,.T.); +#90634 = VERTEX_POINT('',#90635); +#90635 = CARTESIAN_POINT('',(-1.99,1.375,2.E-02)); +#90636 = LINE('',#90637,#90638); +#90637 = CARTESIAN_POINT('',(-1.995,1.375,2.E-02)); +#90638 = VECTOR('',#90639,1.); +#90639 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90640 = ORIENTED_EDGE('',*,*,#90641,.T.); +#90641 = EDGE_CURVE('',#90634,#90642,#90644,.T.); +#90642 = VERTEX_POINT('',#90643); +#90643 = CARTESIAN_POINT('',(-1.99,1.125,2.E-02)); +#90644 = LINE('',#90645,#90646); +#90645 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90646 = VECTOR('',#90647,1.); +#90647 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90648 = ORIENTED_EDGE('',*,*,#90649,.T.); +#90649 = EDGE_CURVE('',#90642,#90650,#90652,.T.); +#90650 = VERTEX_POINT('',#90651); +#90651 = CARTESIAN_POINT('',(-1.725,1.125,2.E-02)); +#90652 = LINE('',#90653,#90654); +#90653 = CARTESIAN_POINT('',(-1.8575,1.125,2.E-02)); +#90654 = VECTOR('',#90655,1.); +#90655 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90656 = ORIENTED_EDGE('',*,*,#90657,.T.); +#90657 = EDGE_CURVE('',#90650,#90658,#90660,.T.); +#90658 = VERTEX_POINT('',#90659); +#90659 = CARTESIAN_POINT('',(-1.725,0.875,2.E-02)); +#90660 = CIRCLE('',#90661,0.125); +#90661 = AXIS2_PLACEMENT_3D('',#90662,#90663,#90664); +#90662 = CARTESIAN_POINT('',(-1.725,1.,2.E-02)); +#90663 = DIRECTION('',(-0.,0.,-1.)); +#90664 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90665 = ORIENTED_EDGE('',*,*,#90666,.T.); +#90666 = EDGE_CURVE('',#90658,#90667,#90669,.T.); +#90667 = VERTEX_POINT('',#90668); +#90668 = CARTESIAN_POINT('',(-1.99,0.875,2.E-02)); +#90669 = LINE('',#90670,#90671); +#90670 = CARTESIAN_POINT('',(-1.995,0.875,2.E-02)); +#90671 = VECTOR('',#90672,1.); +#90672 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90673 = ORIENTED_EDGE('',*,*,#90674,.T.); +#90674 = EDGE_CURVE('',#90667,#90675,#90677,.T.); +#90675 = VERTEX_POINT('',#90676); +#90676 = CARTESIAN_POINT('',(-1.99,0.625,2.E-02)); +#90677 = LINE('',#90678,#90679); +#90678 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90679 = VECTOR('',#90680,1.); +#90680 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90681 = ORIENTED_EDGE('',*,*,#90682,.T.); +#90682 = EDGE_CURVE('',#90675,#90683,#90685,.T.); +#90683 = VERTEX_POINT('',#90684); +#90684 = CARTESIAN_POINT('',(-1.725,0.625,2.E-02)); +#90685 = LINE('',#90686,#90687); +#90686 = CARTESIAN_POINT('',(-1.8575,0.625,2.E-02)); +#90687 = VECTOR('',#90688,1.); +#90688 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90689 = ORIENTED_EDGE('',*,*,#90690,.T.); +#90690 = EDGE_CURVE('',#90683,#90691,#90693,.T.); +#90691 = VERTEX_POINT('',#90692); +#90692 = CARTESIAN_POINT('',(-1.725,0.375,2.E-02)); +#90693 = CIRCLE('',#90694,0.125); +#90694 = AXIS2_PLACEMENT_3D('',#90695,#90696,#90697); +#90695 = CARTESIAN_POINT('',(-1.725,0.5,2.E-02)); +#90696 = DIRECTION('',(-0.,0.,-1.)); +#90697 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90698 = ORIENTED_EDGE('',*,*,#90699,.T.); +#90699 = EDGE_CURVE('',#90691,#90700,#90702,.T.); +#90700 = VERTEX_POINT('',#90701); +#90701 = CARTESIAN_POINT('',(-1.99,0.375,2.E-02)); +#90702 = LINE('',#90703,#90704); +#90703 = CARTESIAN_POINT('',(-1.995,0.375,2.E-02)); +#90704 = VECTOR('',#90705,1.); +#90705 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90706 = ORIENTED_EDGE('',*,*,#90707,.T.); +#90707 = EDGE_CURVE('',#90700,#90708,#90710,.T.); +#90708 = VERTEX_POINT('',#90709); +#90709 = CARTESIAN_POINT('',(-1.99,0.125,2.E-02)); +#90710 = LINE('',#90711,#90712); +#90711 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90712 = VECTOR('',#90713,1.); +#90713 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90714 = ORIENTED_EDGE('',*,*,#90715,.T.); +#90715 = EDGE_CURVE('',#90708,#90716,#90718,.T.); +#90716 = VERTEX_POINT('',#90717); +#90717 = CARTESIAN_POINT('',(-1.725,0.125,2.E-02)); +#90718 = LINE('',#90719,#90720); +#90719 = CARTESIAN_POINT('',(-1.8575,0.125,2.E-02)); +#90720 = VECTOR('',#90721,1.); +#90721 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90722 = ORIENTED_EDGE('',*,*,#90723,.T.); +#90723 = EDGE_CURVE('',#90716,#90724,#90726,.T.); +#90724 = VERTEX_POINT('',#90725); +#90725 = CARTESIAN_POINT('',(-1.725,-0.125,2.E-02)); +#90726 = CIRCLE('',#90727,0.125); +#90727 = AXIS2_PLACEMENT_3D('',#90728,#90729,#90730); +#90728 = CARTESIAN_POINT('',(-1.725,5.495603971895E-16,2.E-02)); +#90729 = DIRECTION('',(-0.,0.,-1.)); +#90730 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90731 = ORIENTED_EDGE('',*,*,#90732,.T.); +#90732 = EDGE_CURVE('',#90724,#90733,#90735,.T.); +#90733 = VERTEX_POINT('',#90734); +#90734 = CARTESIAN_POINT('',(-1.99,-0.125,2.E-02)); +#90735 = LINE('',#90736,#90737); +#90736 = CARTESIAN_POINT('',(-1.995,-0.125,2.E-02)); +#90737 = VECTOR('',#90738,1.); +#90738 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90739 = ORIENTED_EDGE('',*,*,#90740,.T.); +#90740 = EDGE_CURVE('',#90733,#90741,#90743,.T.); +#90741 = VERTEX_POINT('',#90742); +#90742 = CARTESIAN_POINT('',(-1.99,-0.375,2.E-02)); +#90743 = LINE('',#90744,#90745); +#90744 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90745 = VECTOR('',#90746,1.); +#90746 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90747 = ORIENTED_EDGE('',*,*,#90748,.T.); +#90748 = EDGE_CURVE('',#90741,#90749,#90751,.T.); +#90749 = VERTEX_POINT('',#90750); +#90750 = CARTESIAN_POINT('',(-1.725,-0.375,2.E-02)); +#90751 = LINE('',#90752,#90753); +#90752 = CARTESIAN_POINT('',(-1.8575,-0.375,2.E-02)); +#90753 = VECTOR('',#90754,1.); +#90754 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90755 = ORIENTED_EDGE('',*,*,#90756,.T.); +#90756 = EDGE_CURVE('',#90749,#90757,#90759,.T.); +#90757 = VERTEX_POINT('',#90758); +#90758 = CARTESIAN_POINT('',(-1.725,-0.625,2.E-02)); +#90759 = CIRCLE('',#90760,0.125); +#90760 = AXIS2_PLACEMENT_3D('',#90761,#90762,#90763); +#90761 = CARTESIAN_POINT('',(-1.725,-0.5,2.E-02)); +#90762 = DIRECTION('',(-0.,0.,-1.)); +#90763 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90764 = ORIENTED_EDGE('',*,*,#90765,.T.); +#90765 = EDGE_CURVE('',#90757,#90766,#90768,.T.); +#90766 = VERTEX_POINT('',#90767); +#90767 = CARTESIAN_POINT('',(-1.99,-0.625,2.E-02)); +#90768 = LINE('',#90769,#90770); +#90769 = CARTESIAN_POINT('',(-1.995,-0.625,2.E-02)); +#90770 = VECTOR('',#90771,1.); +#90771 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90772 = ORIENTED_EDGE('',*,*,#90773,.T.); +#90773 = EDGE_CURVE('',#90766,#90774,#90776,.T.); +#90774 = VERTEX_POINT('',#90775); +#90775 = CARTESIAN_POINT('',(-1.99,-0.875,2.E-02)); +#90776 = LINE('',#90777,#90778); +#90777 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90778 = VECTOR('',#90779,1.); +#90779 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90780 = ORIENTED_EDGE('',*,*,#90781,.T.); +#90781 = EDGE_CURVE('',#90774,#90782,#90784,.T.); +#90782 = VERTEX_POINT('',#90783); +#90783 = CARTESIAN_POINT('',(-1.725,-0.875,2.E-02)); +#90784 = LINE('',#90785,#90786); +#90785 = CARTESIAN_POINT('',(-1.8575,-0.875,2.E-02)); +#90786 = VECTOR('',#90787,1.); +#90787 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90788 = ORIENTED_EDGE('',*,*,#90789,.T.); +#90789 = EDGE_CURVE('',#90782,#90790,#90792,.T.); +#90790 = VERTEX_POINT('',#90791); +#90791 = CARTESIAN_POINT('',(-1.725,-1.125,2.E-02)); +#90792 = CIRCLE('',#90793,0.125); +#90793 = AXIS2_PLACEMENT_3D('',#90794,#90795,#90796); +#90794 = CARTESIAN_POINT('',(-1.725,-1.,2.E-02)); +#90795 = DIRECTION('',(-0.,0.,-1.)); +#90796 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90797 = ORIENTED_EDGE('',*,*,#90798,.T.); +#90798 = EDGE_CURVE('',#90790,#90799,#90801,.T.); +#90799 = VERTEX_POINT('',#90800); +#90800 = CARTESIAN_POINT('',(-1.99,-1.125,2.E-02)); +#90801 = LINE('',#90802,#90803); +#90802 = CARTESIAN_POINT('',(-1.995,-1.125,2.E-02)); +#90803 = VECTOR('',#90804,1.); +#90804 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90805 = ORIENTED_EDGE('',*,*,#90806,.T.); +#90806 = EDGE_CURVE('',#90799,#90807,#90809,.T.); +#90807 = VERTEX_POINT('',#90808); +#90808 = CARTESIAN_POINT('',(-1.99,-1.375,2.E-02)); +#90809 = LINE('',#90810,#90811); +#90810 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90811 = VECTOR('',#90812,1.); +#90812 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90813 = ORIENTED_EDGE('',*,*,#90814,.T.); +#90814 = EDGE_CURVE('',#90807,#90815,#90817,.T.); +#90815 = VERTEX_POINT('',#90816); +#90816 = CARTESIAN_POINT('',(-1.725,-1.375,2.E-02)); +#90817 = LINE('',#90818,#90819); +#90818 = CARTESIAN_POINT('',(-1.8575,-1.375,2.E-02)); +#90819 = VECTOR('',#90820,1.); +#90820 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90821 = ORIENTED_EDGE('',*,*,#90822,.T.); +#90822 = EDGE_CURVE('',#90815,#90823,#90825,.T.); +#90823 = VERTEX_POINT('',#90824); +#90824 = CARTESIAN_POINT('',(-1.725,-1.625,2.E-02)); +#90825 = CIRCLE('',#90826,0.125); +#90826 = AXIS2_PLACEMENT_3D('',#90827,#90828,#90829); +#90827 = CARTESIAN_POINT('',(-1.725,-1.5,2.E-02)); +#90828 = DIRECTION('',(-0.,0.,-1.)); +#90829 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90830 = ORIENTED_EDGE('',*,*,#90831,.T.); +#90831 = EDGE_CURVE('',#90823,#90832,#90834,.T.); +#90832 = VERTEX_POINT('',#90833); +#90833 = CARTESIAN_POINT('',(-1.99,-1.625,2.E-02)); +#90834 = LINE('',#90835,#90836); +#90835 = CARTESIAN_POINT('',(-1.995,-1.625,2.E-02)); +#90836 = VECTOR('',#90837,1.); +#90837 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90838 = ORIENTED_EDGE('',*,*,#90839,.T.); +#90839 = EDGE_CURVE('',#90832,#90840,#90842,.T.); +#90840 = VERTEX_POINT('',#90841); +#90841 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90842 = LINE('',#90843,#90844); +#90843 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90844 = VECTOR('',#90845,1.); +#90845 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90846 = ORIENTED_EDGE('',*,*,#90847,.T.); +#90847 = EDGE_CURVE('',#90840,#90848,#90850,.T.); +#90848 = VERTEX_POINT('',#90849); +#90849 = CARTESIAN_POINT('',(-1.125,-2.49,2.E-02)); +#90850 = LINE('',#90851,#90852); +#90851 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90852 = VECTOR('',#90853,1.); +#90853 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90854 = ORIENTED_EDGE('',*,*,#90855,.T.); +#90855 = EDGE_CURVE('',#90848,#90856,#90858,.T.); +#90856 = VERTEX_POINT('',#90857); +#90857 = CARTESIAN_POINT('',(-1.125,-2.225,2.E-02)); +#90858 = LINE('',#90859,#90860); +#90859 = CARTESIAN_POINT('',(-1.125,0.1325,2.E-02)); +#90860 = VECTOR('',#90861,1.); +#90861 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90862 = ORIENTED_EDGE('',*,*,#90863,.T.); +#90863 = EDGE_CURVE('',#90856,#90864,#90866,.T.); +#90864 = VERTEX_POINT('',#90865); +#90865 = CARTESIAN_POINT('',(-0.875,-2.225,2.E-02)); +#90866 = CIRCLE('',#90867,0.125); +#90867 = AXIS2_PLACEMENT_3D('',#90868,#90869,#90870); +#90868 = CARTESIAN_POINT('',(-1.,-2.225,2.E-02)); +#90869 = DIRECTION('',(0.,-0.,-1.)); +#90870 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90871 = ORIENTED_EDGE('',*,*,#90872,.T.); +#90872 = EDGE_CURVE('',#90864,#90873,#90875,.T.); +#90873 = VERTEX_POINT('',#90874); +#90874 = CARTESIAN_POINT('',(-0.875,-2.49,2.E-02)); +#90875 = LINE('',#90876,#90877); +#90876 = CARTESIAN_POINT('',(-0.875,-5.E-03,2.E-02)); +#90877 = VECTOR('',#90878,1.); +#90878 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90879 = ORIENTED_EDGE('',*,*,#90880,.T.); +#90880 = EDGE_CURVE('',#90873,#90881,#90883,.T.); +#90881 = VERTEX_POINT('',#90882); +#90882 = CARTESIAN_POINT('',(-0.625,-2.49,2.E-02)); +#90883 = LINE('',#90884,#90885); +#90884 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90885 = VECTOR('',#90886,1.); +#90886 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90887 = ORIENTED_EDGE('',*,*,#90888,.T.); +#90888 = EDGE_CURVE('',#90881,#90889,#90891,.T.); +#90889 = VERTEX_POINT('',#90890); +#90890 = CARTESIAN_POINT('',(-0.625,-2.225,2.E-02)); +#90891 = LINE('',#90892,#90893); +#90892 = CARTESIAN_POINT('',(-0.625,0.1325,2.E-02)); +#90893 = VECTOR('',#90894,1.); +#90894 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90895 = ORIENTED_EDGE('',*,*,#90896,.T.); +#90896 = EDGE_CURVE('',#90889,#90897,#90899,.T.); +#90897 = VERTEX_POINT('',#90898); +#90898 = CARTESIAN_POINT('',(-0.375,-2.225,2.E-02)); +#90899 = CIRCLE('',#90900,0.125); +#90900 = AXIS2_PLACEMENT_3D('',#90901,#90902,#90903); +#90901 = CARTESIAN_POINT('',(-0.5,-2.225,2.E-02)); +#90902 = DIRECTION('',(0.,-0.,-1.)); +#90903 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90904 = ORIENTED_EDGE('',*,*,#90905,.T.); +#90905 = EDGE_CURVE('',#90897,#90906,#90908,.T.); +#90906 = VERTEX_POINT('',#90907); +#90907 = CARTESIAN_POINT('',(-0.375,-2.49,2.E-02)); +#90908 = LINE('',#90909,#90910); +#90909 = CARTESIAN_POINT('',(-0.375,-5.E-03,2.E-02)); +#90910 = VECTOR('',#90911,1.); +#90911 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90912 = ORIENTED_EDGE('',*,*,#90913,.T.); +#90913 = EDGE_CURVE('',#90906,#90914,#90916,.T.); +#90914 = VERTEX_POINT('',#90915); +#90915 = CARTESIAN_POINT('',(-0.125,-2.49,2.E-02)); +#90916 = LINE('',#90917,#90918); +#90917 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90918 = VECTOR('',#90919,1.); +#90919 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90920 = ORIENTED_EDGE('',*,*,#90921,.T.); +#90921 = EDGE_CURVE('',#90914,#90922,#90924,.T.); +#90922 = VERTEX_POINT('',#90923); +#90923 = CARTESIAN_POINT('',(-0.125,-2.225,2.E-02)); +#90924 = LINE('',#90925,#90926); +#90925 = CARTESIAN_POINT('',(-0.125,0.1325,2.E-02)); +#90926 = VECTOR('',#90927,1.); +#90927 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90928 = ORIENTED_EDGE('',*,*,#90929,.T.); +#90929 = EDGE_CURVE('',#90922,#90930,#90932,.T.); +#90930 = VERTEX_POINT('',#90931); +#90931 = CARTESIAN_POINT('',(0.125,-2.225,2.E-02)); +#90932 = CIRCLE('',#90933,0.125); +#90933 = AXIS2_PLACEMENT_3D('',#90934,#90935,#90936); +#90934 = CARTESIAN_POINT('',(-9.381384558083E-16,-2.225,2.E-02)); +#90935 = DIRECTION('',(0.,-0.,-1.)); +#90936 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90937 = ORIENTED_EDGE('',*,*,#90938,.T.); +#90938 = EDGE_CURVE('',#90930,#90939,#90941,.T.); +#90939 = VERTEX_POINT('',#90940); +#90940 = CARTESIAN_POINT('',(0.125,-2.49,2.E-02)); +#90941 = LINE('',#90942,#90943); +#90942 = CARTESIAN_POINT('',(0.125,-5.E-03,2.E-02)); +#90943 = VECTOR('',#90944,1.); +#90944 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90945 = ORIENTED_EDGE('',*,*,#90946,.T.); +#90946 = EDGE_CURVE('',#90939,#90947,#90949,.T.); +#90947 = VERTEX_POINT('',#90948); +#90948 = CARTESIAN_POINT('',(0.375,-2.49,2.E-02)); +#90949 = LINE('',#90950,#90951); +#90950 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90951 = VECTOR('',#90952,1.); +#90952 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90953 = ORIENTED_EDGE('',*,*,#90954,.T.); +#90954 = EDGE_CURVE('',#90947,#90955,#90957,.T.); +#90955 = VERTEX_POINT('',#90956); +#90956 = CARTESIAN_POINT('',(0.375,-2.225,2.E-02)); +#90957 = LINE('',#90958,#90959); +#90958 = CARTESIAN_POINT('',(0.375,0.1325,2.E-02)); +#90959 = VECTOR('',#90960,1.); +#90960 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90961 = ORIENTED_EDGE('',*,*,#90962,.T.); +#90962 = EDGE_CURVE('',#90955,#90963,#90965,.T.); +#90963 = VERTEX_POINT('',#90964); +#90964 = CARTESIAN_POINT('',(0.625,-2.225,2.E-02)); +#90965 = CIRCLE('',#90966,0.125); +#90966 = AXIS2_PLACEMENT_3D('',#90967,#90968,#90969); +#90967 = CARTESIAN_POINT('',(0.5,-2.225,2.E-02)); +#90968 = DIRECTION('',(0.,-0.,-1.)); +#90969 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90970 = ORIENTED_EDGE('',*,*,#90971,.T.); +#90971 = EDGE_CURVE('',#90963,#90972,#90974,.T.); +#90972 = VERTEX_POINT('',#90973); +#90973 = CARTESIAN_POINT('',(0.625,-2.49,2.E-02)); +#90974 = LINE('',#90975,#90976); +#90975 = CARTESIAN_POINT('',(0.625,-5.E-03,2.E-02)); +#90976 = VECTOR('',#90977,1.); +#90977 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90978 = ORIENTED_EDGE('',*,*,#90979,.T.); +#90979 = EDGE_CURVE('',#90972,#90980,#90982,.T.); +#90980 = VERTEX_POINT('',#90981); +#90981 = CARTESIAN_POINT('',(0.875,-2.49,2.E-02)); +#90982 = LINE('',#90983,#90984); +#90983 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90984 = VECTOR('',#90985,1.); +#90985 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90986 = ORIENTED_EDGE('',*,*,#90987,.T.); +#90987 = EDGE_CURVE('',#90980,#90988,#90990,.T.); +#90988 = VERTEX_POINT('',#90989); +#90989 = CARTESIAN_POINT('',(0.875,-2.225,2.E-02)); +#90990 = LINE('',#90991,#90992); +#90991 = CARTESIAN_POINT('',(0.875,0.1325,2.E-02)); +#90992 = VECTOR('',#90993,1.); +#90993 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90994 = ORIENTED_EDGE('',*,*,#90995,.T.); +#90995 = EDGE_CURVE('',#90988,#90996,#90998,.T.); +#90996 = VERTEX_POINT('',#90997); +#90997 = CARTESIAN_POINT('',(1.125,-2.225,2.E-02)); +#90998 = CIRCLE('',#90999,0.125); +#90999 = AXIS2_PLACEMENT_3D('',#91000,#91001,#91002); +#91000 = CARTESIAN_POINT('',(1.,-2.225,2.E-02)); +#91001 = DIRECTION('',(0.,-0.,-1.)); +#91002 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#91003 = ORIENTED_EDGE('',*,*,#91004,.T.); +#91004 = EDGE_CURVE('',#90996,#91005,#91007,.T.); +#91005 = VERTEX_POINT('',#91006); +#91006 = CARTESIAN_POINT('',(1.125,-2.49,2.E-02)); +#91007 = LINE('',#91008,#91009); +#91008 = CARTESIAN_POINT('',(1.125,-5.000000000001E-03,2.E-02)); +#91009 = VECTOR('',#91010,1.); +#91010 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#91011 = ORIENTED_EDGE('',*,*,#91012,.T.); +#91012 = EDGE_CURVE('',#91005,#91013,#91015,.T.); +#91013 = VERTEX_POINT('',#91014); +#91014 = CARTESIAN_POINT('',(1.99,-2.49,2.E-02)); +#91015 = LINE('',#91016,#91017); +#91016 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#91017 = VECTOR('',#91018,1.); +#91018 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91019 = ORIENTED_EDGE('',*,*,#91020,.F.); +#91020 = EDGE_CURVE('',#91021,#91013,#91023,.T.); +#91021 = VERTEX_POINT('',#91022); +#91022 = CARTESIAN_POINT('',(1.99,-1.625,2.E-02)); +#91023 = LINE('',#91024,#91025); +#91024 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91025 = VECTOR('',#91026,1.); +#91026 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91027 = ORIENTED_EDGE('',*,*,#91028,.T.); +#91028 = EDGE_CURVE('',#91021,#91029,#91031,.T.); +#91029 = VERTEX_POINT('',#91030); +#91030 = CARTESIAN_POINT('',(1.725,-1.625,2.E-02)); +#91031 = LINE('',#91032,#91033); +#91032 = CARTESIAN_POINT('',(-0.1325,-1.625,2.E-02)); +#91033 = VECTOR('',#91034,1.); +#91034 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91035 = ORIENTED_EDGE('',*,*,#91036,.T.); +#91036 = EDGE_CURVE('',#91029,#91037,#91039,.T.); +#91037 = VERTEX_POINT('',#91038); +#91038 = CARTESIAN_POINT('',(1.725,-1.375,2.E-02)); +#91039 = CIRCLE('',#91040,0.125); +#91040 = AXIS2_PLACEMENT_3D('',#91041,#91042,#91043); +#91041 = CARTESIAN_POINT('',(1.725,-1.5,2.E-02)); +#91042 = DIRECTION('',(0.,0.,-1.)); +#91043 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91044 = ORIENTED_EDGE('',*,*,#91045,.T.); +#91045 = EDGE_CURVE('',#91037,#91046,#91048,.T.); +#91046 = VERTEX_POINT('',#91047); +#91047 = CARTESIAN_POINT('',(1.99,-1.375,2.E-02)); +#91048 = LINE('',#91049,#91050); +#91049 = CARTESIAN_POINT('',(4.999999999999E-03,-1.375,2.E-02)); +#91050 = VECTOR('',#91051,1.); +#91051 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91052 = ORIENTED_EDGE('',*,*,#91053,.F.); +#91053 = EDGE_CURVE('',#91054,#91046,#91056,.T.); +#91054 = VERTEX_POINT('',#91055); +#91055 = CARTESIAN_POINT('',(1.99,-1.125,2.E-02)); +#91056 = LINE('',#91057,#91058); +#91057 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91058 = VECTOR('',#91059,1.); +#91059 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91060 = ORIENTED_EDGE('',*,*,#91061,.T.); +#91061 = EDGE_CURVE('',#91054,#91062,#91064,.T.); +#91062 = VERTEX_POINT('',#91063); +#91063 = CARTESIAN_POINT('',(1.725,-1.125,2.E-02)); +#91064 = LINE('',#91065,#91066); +#91065 = CARTESIAN_POINT('',(-0.1325,-1.125,2.E-02)); +#91066 = VECTOR('',#91067,1.); +#91067 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91068 = ORIENTED_EDGE('',*,*,#91069,.T.); +#91069 = EDGE_CURVE('',#91062,#91070,#91072,.T.); +#91070 = VERTEX_POINT('',#91071); +#91071 = CARTESIAN_POINT('',(1.725,-0.875,2.E-02)); +#91072 = CIRCLE('',#91073,0.125); +#91073 = AXIS2_PLACEMENT_3D('',#91074,#91075,#91076); +#91074 = CARTESIAN_POINT('',(1.725,-1.,2.E-02)); +#91075 = DIRECTION('',(0.,0.,-1.)); +#91076 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91077 = ORIENTED_EDGE('',*,*,#91078,.T.); +#91078 = EDGE_CURVE('',#91070,#91079,#91081,.T.); +#91079 = VERTEX_POINT('',#91080); +#91080 = CARTESIAN_POINT('',(1.99,-0.875,2.E-02)); +#91081 = LINE('',#91082,#91083); +#91082 = CARTESIAN_POINT('',(5.E-03,-0.875,2.E-02)); +#91083 = VECTOR('',#91084,1.); +#91084 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91085 = ORIENTED_EDGE('',*,*,#91086,.F.); +#91086 = EDGE_CURVE('',#91087,#91079,#91089,.T.); +#91087 = VERTEX_POINT('',#91088); +#91088 = CARTESIAN_POINT('',(1.99,-0.625,2.E-02)); +#91089 = LINE('',#91090,#91091); +#91090 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91091 = VECTOR('',#91092,1.); +#91092 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91093 = ORIENTED_EDGE('',*,*,#91094,.T.); +#91094 = EDGE_CURVE('',#91087,#91095,#91097,.T.); +#91095 = VERTEX_POINT('',#91096); +#91096 = CARTESIAN_POINT('',(1.725,-0.625,2.E-02)); +#91097 = LINE('',#91098,#91099); +#91098 = CARTESIAN_POINT('',(-0.1325,-0.625,2.E-02)); +#91099 = VECTOR('',#91100,1.); +#91100 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91101 = ORIENTED_EDGE('',*,*,#91102,.T.); +#91102 = EDGE_CURVE('',#91095,#91103,#91105,.T.); +#91103 = VERTEX_POINT('',#91104); +#91104 = CARTESIAN_POINT('',(1.725,-0.375,2.E-02)); +#91105 = CIRCLE('',#91106,0.125); +#91106 = AXIS2_PLACEMENT_3D('',#91107,#91108,#91109); +#91107 = CARTESIAN_POINT('',(1.725,-0.5,2.E-02)); +#91108 = DIRECTION('',(0.,0.,-1.)); +#91109 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91110 = ORIENTED_EDGE('',*,*,#91111,.T.); +#91111 = EDGE_CURVE('',#91103,#91112,#91114,.T.); +#91112 = VERTEX_POINT('',#91113); +#91113 = CARTESIAN_POINT('',(1.99,-0.375,2.E-02)); +#91114 = LINE('',#91115,#91116); +#91115 = CARTESIAN_POINT('',(5.E-03,-0.375,2.E-02)); +#91116 = VECTOR('',#91117,1.); +#91117 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91118 = ORIENTED_EDGE('',*,*,#91119,.F.); +#91119 = EDGE_CURVE('',#91120,#91112,#91122,.T.); +#91120 = VERTEX_POINT('',#91121); +#91121 = CARTESIAN_POINT('',(1.99,-0.125,2.E-02)); +#91122 = LINE('',#91123,#91124); +#91123 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91124 = VECTOR('',#91125,1.); +#91125 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91126 = ORIENTED_EDGE('',*,*,#91127,.T.); +#91127 = EDGE_CURVE('',#91120,#91128,#91130,.T.); +#91128 = VERTEX_POINT('',#91129); +#91129 = CARTESIAN_POINT('',(1.725,-0.125,2.E-02)); +#91130 = LINE('',#91131,#91132); +#91131 = CARTESIAN_POINT('',(-0.1325,-0.125,2.E-02)); +#91132 = VECTOR('',#91133,1.); +#91133 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91134 = ORIENTED_EDGE('',*,*,#91135,.T.); +#91135 = EDGE_CURVE('',#91128,#91136,#91138,.T.); +#91136 = VERTEX_POINT('',#91137); +#91137 = CARTESIAN_POINT('',(1.725,0.125,2.E-02)); +#91138 = CIRCLE('',#91139,0.125); +#91139 = AXIS2_PLACEMENT_3D('',#91140,#91141,#91142); +#91140 = CARTESIAN_POINT('',(1.725,-3.275157922644E-16,2.E-02)); +#91141 = DIRECTION('',(0.,0.,-1.)); +#91142 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91143 = ORIENTED_EDGE('',*,*,#91144,.T.); +#91144 = EDGE_CURVE('',#91136,#91145,#91147,.T.); +#91145 = VERTEX_POINT('',#91146); +#91146 = CARTESIAN_POINT('',(1.99,0.125,2.E-02)); +#91147 = LINE('',#91148,#91149); +#91148 = CARTESIAN_POINT('',(5.E-03,0.125,2.E-02)); +#91149 = VECTOR('',#91150,1.); +#91150 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91151 = ORIENTED_EDGE('',*,*,#91152,.F.); +#91152 = EDGE_CURVE('',#91153,#91145,#91155,.T.); +#91153 = VERTEX_POINT('',#91154); +#91154 = CARTESIAN_POINT('',(1.99,0.375,2.E-02)); +#91155 = LINE('',#91156,#91157); +#91156 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91157 = VECTOR('',#91158,1.); +#91158 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91159 = ORIENTED_EDGE('',*,*,#91160,.T.); +#91160 = EDGE_CURVE('',#91153,#91161,#91163,.T.); +#91161 = VERTEX_POINT('',#91162); +#91162 = CARTESIAN_POINT('',(1.725,0.375,2.E-02)); +#91163 = LINE('',#91164,#91165); +#91164 = CARTESIAN_POINT('',(-0.1325,0.375,2.E-02)); +#91165 = VECTOR('',#91166,1.); +#91166 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91167 = ORIENTED_EDGE('',*,*,#91168,.T.); +#91168 = EDGE_CURVE('',#91161,#91169,#91171,.T.); +#91169 = VERTEX_POINT('',#91170); +#91170 = CARTESIAN_POINT('',(1.725,0.625,2.E-02)); +#91171 = CIRCLE('',#91172,0.125); +#91172 = AXIS2_PLACEMENT_3D('',#91173,#91174,#91175); +#91173 = CARTESIAN_POINT('',(1.725,0.5,2.E-02)); +#91174 = DIRECTION('',(0.,0.,-1.)); +#91175 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91176 = ORIENTED_EDGE('',*,*,#91177,.T.); +#91177 = EDGE_CURVE('',#91169,#91178,#91180,.T.); +#91178 = VERTEX_POINT('',#91179); +#91179 = CARTESIAN_POINT('',(1.99,0.625,2.E-02)); +#91180 = LINE('',#91181,#91182); +#91181 = CARTESIAN_POINT('',(5.E-03,0.625,2.E-02)); +#91182 = VECTOR('',#91183,1.); +#91183 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91184 = ORIENTED_EDGE('',*,*,#91185,.F.); +#91185 = EDGE_CURVE('',#91186,#91178,#91188,.T.); +#91186 = VERTEX_POINT('',#91187); +#91187 = CARTESIAN_POINT('',(1.99,0.875,2.E-02)); +#91188 = LINE('',#91189,#91190); +#91189 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91190 = VECTOR('',#91191,1.); +#91191 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91192 = ORIENTED_EDGE('',*,*,#91193,.T.); +#91193 = EDGE_CURVE('',#91186,#91194,#91196,.T.); +#91194 = VERTEX_POINT('',#91195); +#91195 = CARTESIAN_POINT('',(1.725,0.875,2.E-02)); +#91196 = LINE('',#91197,#91198); +#91197 = CARTESIAN_POINT('',(-0.1325,0.875,2.E-02)); +#91198 = VECTOR('',#91199,1.); +#91199 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91200 = ORIENTED_EDGE('',*,*,#91201,.T.); +#91201 = EDGE_CURVE('',#91194,#91202,#91204,.T.); +#91202 = VERTEX_POINT('',#91203); +#91203 = CARTESIAN_POINT('',(1.725,1.125,2.E-02)); +#91204 = CIRCLE('',#91205,0.125); +#91205 = AXIS2_PLACEMENT_3D('',#91206,#91207,#91208); +#91206 = CARTESIAN_POINT('',(1.725,1.,2.E-02)); +#91207 = DIRECTION('',(0.,0.,-1.)); +#91208 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91209 = ORIENTED_EDGE('',*,*,#91210,.T.); +#91210 = EDGE_CURVE('',#91202,#91211,#91213,.T.); +#91211 = VERTEX_POINT('',#91212); +#91212 = CARTESIAN_POINT('',(1.99,1.125,2.E-02)); +#91213 = LINE('',#91214,#91215); +#91214 = CARTESIAN_POINT('',(5.E-03,1.125,2.E-02)); +#91215 = VECTOR('',#91216,1.); +#91216 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91217 = ORIENTED_EDGE('',*,*,#91218,.F.); +#91218 = EDGE_CURVE('',#91219,#91211,#91221,.T.); +#91219 = VERTEX_POINT('',#91220); +#91220 = CARTESIAN_POINT('',(1.99,1.375,2.E-02)); +#91221 = LINE('',#91222,#91223); +#91222 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91223 = VECTOR('',#91224,1.); +#91224 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91225 = ORIENTED_EDGE('',*,*,#91226,.T.); +#91226 = EDGE_CURVE('',#91219,#91227,#91229,.T.); +#91227 = VERTEX_POINT('',#91228); +#91228 = CARTESIAN_POINT('',(1.725,1.375,2.E-02)); +#91229 = LINE('',#91230,#91231); +#91230 = CARTESIAN_POINT('',(-0.1325,1.375,2.E-02)); +#91231 = VECTOR('',#91232,1.); +#91232 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91233 = ORIENTED_EDGE('',*,*,#91234,.T.); +#91234 = EDGE_CURVE('',#91227,#91235,#91237,.T.); +#91235 = VERTEX_POINT('',#91236); +#91236 = CARTESIAN_POINT('',(1.725,1.625,2.E-02)); +#91237 = CIRCLE('',#91238,0.125); +#91238 = AXIS2_PLACEMENT_3D('',#91239,#91240,#91241); +#91239 = CARTESIAN_POINT('',(1.725,1.5,2.E-02)); +#91240 = DIRECTION('',(0.,0.,-1.)); +#91241 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91242 = ORIENTED_EDGE('',*,*,#91243,.T.); +#91243 = EDGE_CURVE('',#91235,#91244,#91246,.T.); +#91244 = VERTEX_POINT('',#91245); +#91245 = CARTESIAN_POINT('',(1.99,1.625,2.E-02)); +#91246 = LINE('',#91247,#91248); +#91247 = CARTESIAN_POINT('',(5.E-03,1.625,2.E-02)); +#91248 = VECTOR('',#91249,1.); +#91249 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91250 = ORIENTED_EDGE('',*,*,#91251,.F.); +#91251 = EDGE_CURVE('',#91252,#91244,#91254,.T.); +#91252 = VERTEX_POINT('',#91253); +#91253 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91254 = LINE('',#91255,#91256); +#91255 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91256 = VECTOR('',#91257,1.); +#91257 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91258 = ORIENTED_EDGE('',*,*,#91259,.F.); +#91259 = EDGE_CURVE('',#91260,#91252,#91262,.T.); +#91260 = VERTEX_POINT('',#91261); +#91261 = CARTESIAN_POINT('',(1.125,2.49,2.E-02)); +#91262 = LINE('',#91263,#91264); +#91263 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91264 = VECTOR('',#91265,1.); +#91265 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91266 = ORIENTED_EDGE('',*,*,#91267,.T.); +#91267 = EDGE_CURVE('',#91260,#91268,#91270,.T.); +#91268 = VERTEX_POINT('',#91269); +#91269 = CARTESIAN_POINT('',(1.125,2.225,2.E-02)); +#91270 = LINE('',#91271,#91272); +#91271 = CARTESIAN_POINT('',(1.125,2.3575,2.E-02)); +#91272 = VECTOR('',#91273,1.); +#91273 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91274 = ORIENTED_EDGE('',*,*,#91275,.T.); +#91275 = EDGE_CURVE('',#91268,#91276,#91278,.T.); +#91276 = VERTEX_POINT('',#91277); +#91277 = CARTESIAN_POINT('',(0.875,2.225,2.E-02)); +#91278 = CIRCLE('',#91279,0.125); +#91279 = AXIS2_PLACEMENT_3D('',#91280,#91281,#91282); +#91280 = CARTESIAN_POINT('',(1.,2.225,2.E-02)); +#91281 = DIRECTION('',(0.,0.,-1.)); +#91282 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91283 = ORIENTED_EDGE('',*,*,#91284,.T.); +#91284 = EDGE_CURVE('',#91276,#91285,#91287,.T.); +#91285 = VERTEX_POINT('',#91286); +#91286 = CARTESIAN_POINT('',(0.875,2.49,2.E-02)); +#91287 = LINE('',#91288,#91289); +#91288 = CARTESIAN_POINT('',(0.875,2.495,2.E-02)); +#91289 = VECTOR('',#91290,1.); +#91290 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91291 = ORIENTED_EDGE('',*,*,#91292,.F.); +#91292 = EDGE_CURVE('',#91293,#91285,#91295,.T.); +#91293 = VERTEX_POINT('',#91294); +#91294 = CARTESIAN_POINT('',(0.625,2.49,2.E-02)); +#91295 = LINE('',#91296,#91297); +#91296 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91297 = VECTOR('',#91298,1.); +#91298 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91299 = ORIENTED_EDGE('',*,*,#91300,.T.); +#91300 = EDGE_CURVE('',#91293,#91301,#91303,.T.); +#91301 = VERTEX_POINT('',#91302); +#91302 = CARTESIAN_POINT('',(0.625,2.225,2.E-02)); +#91303 = LINE('',#91304,#91305); +#91304 = CARTESIAN_POINT('',(0.625,2.3575,2.E-02)); +#91305 = VECTOR('',#91306,1.); +#91306 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91307 = ORIENTED_EDGE('',*,*,#91308,.T.); +#91308 = EDGE_CURVE('',#91301,#91309,#91311,.T.); +#91309 = VERTEX_POINT('',#91310); +#91310 = CARTESIAN_POINT('',(0.375,2.225,2.E-02)); +#91311 = CIRCLE('',#91312,0.125); +#91312 = AXIS2_PLACEMENT_3D('',#91313,#91314,#91315); +#91313 = CARTESIAN_POINT('',(0.5,2.225,2.E-02)); +#91314 = DIRECTION('',(0.,0.,-1.)); +#91315 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91316 = ORIENTED_EDGE('',*,*,#91317,.T.); +#91317 = EDGE_CURVE('',#91309,#91318,#91320,.T.); +#91318 = VERTEX_POINT('',#91319); +#91319 = CARTESIAN_POINT('',(0.375,2.49,2.E-02)); +#91320 = LINE('',#91321,#91322); +#91321 = CARTESIAN_POINT('',(0.375,2.495,2.E-02)); +#91322 = VECTOR('',#91323,1.); +#91323 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91324 = ORIENTED_EDGE('',*,*,#91325,.F.); +#91325 = EDGE_CURVE('',#91326,#91318,#91328,.T.); +#91326 = VERTEX_POINT('',#91327); +#91327 = CARTESIAN_POINT('',(0.125,2.49,2.E-02)); +#91328 = LINE('',#91329,#91330); +#91329 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91330 = VECTOR('',#91331,1.); +#91331 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91332 = ORIENTED_EDGE('',*,*,#91333,.T.); +#91333 = EDGE_CURVE('',#91326,#91334,#91336,.T.); +#91334 = VERTEX_POINT('',#91335); +#91335 = CARTESIAN_POINT('',(0.125,2.225,2.E-02)); +#91336 = LINE('',#91337,#91338); +#91337 = CARTESIAN_POINT('',(0.125,2.3575,2.E-02)); +#91338 = VECTOR('',#91339,1.); +#91339 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91340 = ORIENTED_EDGE('',*,*,#91341,.T.); +#91341 = EDGE_CURVE('',#91334,#91342,#91344,.T.); +#91342 = VERTEX_POINT('',#91343); +#91343 = CARTESIAN_POINT('',(-0.125,2.225,2.E-02)); +#91344 = CIRCLE('',#91345,0.125); +#91345 = AXIS2_PLACEMENT_3D('',#91346,#91347,#91348); +#91346 = CARTESIAN_POINT('',(6.883382752676E-16,2.225,2.E-02)); +#91347 = DIRECTION('',(0.,0.,-1.)); +#91348 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91349 = ORIENTED_EDGE('',*,*,#91350,.T.); +#91350 = EDGE_CURVE('',#91342,#91351,#91353,.T.); +#91351 = VERTEX_POINT('',#91352); +#91352 = CARTESIAN_POINT('',(-0.125,2.49,2.E-02)); +#91353 = LINE('',#91354,#91355); +#91354 = CARTESIAN_POINT('',(-0.125,2.495,2.E-02)); +#91355 = VECTOR('',#91356,1.); +#91356 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91357 = ORIENTED_EDGE('',*,*,#91358,.F.); +#91358 = EDGE_CURVE('',#91359,#91351,#91361,.T.); +#91359 = VERTEX_POINT('',#91360); +#91360 = CARTESIAN_POINT('',(-0.375,2.49,2.E-02)); +#91361 = LINE('',#91362,#91363); +#91362 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91363 = VECTOR('',#91364,1.); +#91364 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91365 = ORIENTED_EDGE('',*,*,#91366,.T.); +#91366 = EDGE_CURVE('',#91359,#91367,#91369,.T.); +#91367 = VERTEX_POINT('',#91368); +#91368 = CARTESIAN_POINT('',(-0.375,2.225,2.E-02)); +#91369 = LINE('',#91370,#91371); +#91370 = CARTESIAN_POINT('',(-0.375,2.3575,2.E-02)); +#91371 = VECTOR('',#91372,1.); +#91372 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91373 = ORIENTED_EDGE('',*,*,#91374,.T.); +#91374 = EDGE_CURVE('',#91367,#91375,#91377,.T.); +#91375 = VERTEX_POINT('',#91376); +#91376 = CARTESIAN_POINT('',(-0.625,2.225,2.E-02)); +#91377 = CIRCLE('',#91378,0.125); +#91378 = AXIS2_PLACEMENT_3D('',#91379,#91380,#91381); +#91379 = CARTESIAN_POINT('',(-0.5,2.225,2.E-02)); +#91380 = DIRECTION('',(0.,0.,-1.)); +#91381 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91382 = ORIENTED_EDGE('',*,*,#91383,.T.); +#91383 = EDGE_CURVE('',#91375,#91384,#91386,.T.); +#91384 = VERTEX_POINT('',#91385); +#91385 = CARTESIAN_POINT('',(-0.625,2.49,2.E-02)); +#91386 = LINE('',#91387,#91388); +#91387 = CARTESIAN_POINT('',(-0.625,2.495,2.E-02)); +#91388 = VECTOR('',#91389,1.); +#91389 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91390 = ORIENTED_EDGE('',*,*,#91391,.F.); +#91391 = EDGE_CURVE('',#90546,#91384,#91392,.T.); +#91392 = LINE('',#91393,#91394); +#91393 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91394 = VECTOR('',#91395,1.); +#91395 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91396 = ORIENTED_EDGE('',*,*,#90545,.T.); +#91397 = ORIENTED_EDGE('',*,*,#90526,.T.); +#91398 = ORIENTED_EDGE('',*,*,#90496,.T.); +#91399 = FACE_BOUND('',#91400,.F.); +#91400 = EDGE_LOOP('',(#91401,#91411,#91419,#91427,#91435)); +#91401 = ORIENTED_EDGE('',*,*,#91402,.F.); +#91402 = EDGE_CURVE('',#91403,#91405,#91407,.T.); +#91403 = VERTEX_POINT('',#91404); +#91404 = CARTESIAN_POINT('',(-1.325,1.625,2.E-02)); +#91405 = VERTEX_POINT('',#91406); +#91406 = CARTESIAN_POINT('',(-1.325,-1.825,2.E-02)); +#91407 = LINE('',#91408,#91409); +#91408 = CARTESIAN_POINT('',(-1.325,1.625,2.E-02)); +#91409 = VECTOR('',#91410,1.); +#91410 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91411 = ORIENTED_EDGE('',*,*,#91412,.F.); +#91412 = EDGE_CURVE('',#91413,#91403,#91415,.T.); +#91413 = VERTEX_POINT('',#91414); +#91414 = CARTESIAN_POINT('',(-1.125,1.825,2.E-02)); +#91415 = LINE('',#91416,#91417); +#91416 = CARTESIAN_POINT('',(-1.125,1.825,2.E-02)); +#91417 = VECTOR('',#91418,1.); +#91418 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#91419 = ORIENTED_EDGE('',*,*,#91420,.F.); +#91420 = EDGE_CURVE('',#91421,#91413,#91423,.T.); +#91421 = VERTEX_POINT('',#91422); +#91422 = CARTESIAN_POINT('',(1.325,1.825,2.E-02)); +#91423 = LINE('',#91424,#91425); +#91424 = CARTESIAN_POINT('',(1.325,1.825,2.E-02)); +#91425 = VECTOR('',#91426,1.); +#91426 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#91427 = ORIENTED_EDGE('',*,*,#91428,.F.); +#91428 = EDGE_CURVE('',#91429,#91421,#91431,.T.); +#91429 = VERTEX_POINT('',#91430); +#91430 = CARTESIAN_POINT('',(1.325,-1.825,2.E-02)); +#91431 = LINE('',#91432,#91433); +#91432 = CARTESIAN_POINT('',(1.325,-1.825,2.E-02)); +#91433 = VECTOR('',#91434,1.); +#91434 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91435 = ORIENTED_EDGE('',*,*,#91436,.F.); +#91436 = EDGE_CURVE('',#91405,#91429,#91437,.T.); +#91437 = LINE('',#91438,#91439); +#91438 = CARTESIAN_POINT('',(-1.325,-1.825,2.E-02)); +#91439 = VECTOR('',#91440,1.); +#91440 = DIRECTION('',(1.,-1.382541879722E-16,0.)); +#91441 = PLANE('',#91442); +#91442 = AXIS2_PLACEMENT_3D('',#91443,#91444,#91445); +#91443 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91444 = DIRECTION('',(0.,0.,1.)); +#91445 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91446 = ADVANCED_FACE('',(#91447),#91573,.F.); +#91447 = FACE_BOUND('',#91448,.F.); +#91448 = EDGE_LOOP('',(#91449,#91459,#91465,#91466,#91467,#91473,#91474, + #91475,#91483,#91491,#91497,#91498,#91506,#91514,#91520,#91521, + #91529,#91537,#91543,#91544,#91552,#91560,#91566,#91567)); +#91449 = ORIENTED_EDGE('',*,*,#91450,.F.); +#91450 = EDGE_CURVE('',#91451,#91453,#91455,.T.); +#91451 = VERTEX_POINT('',#91452); +#91452 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#91453 = VERTEX_POINT('',#91454); +#91454 = CARTESIAN_POINT('',(1.99,2.49,0.77)); +#91455 = LINE('',#91456,#91457); +#91456 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#91457 = VECTOR('',#91458,1.); +#91458 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91459 = ORIENTED_EDGE('',*,*,#91460,.F.); +#91460 = EDGE_CURVE('',#90601,#91451,#91461,.T.); +#91461 = LINE('',#91462,#91463); +#91462 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91463 = VECTOR('',#91464,1.); +#91464 = DIRECTION('',(0.,0.,1.)); +#91465 = ORIENTED_EDGE('',*,*,#90600,.T.); +#91466 = ORIENTED_EDGE('',*,*,#90488,.T.); +#91467 = ORIENTED_EDGE('',*,*,#91468,.T.); +#91468 = EDGE_CURVE('',#90481,#90554,#91469,.T.); +#91469 = LINE('',#91470,#91471); +#91470 = CARTESIAN_POINT('',(-1.5575,2.49,0.2)); +#91471 = VECTOR('',#91472,1.); +#91472 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91473 = ORIENTED_EDGE('',*,*,#90553,.T.); +#91474 = ORIENTED_EDGE('',*,*,#91391,.T.); +#91475 = ORIENTED_EDGE('',*,*,#91476,.T.); +#91476 = EDGE_CURVE('',#91384,#91477,#91479,.T.); +#91477 = VERTEX_POINT('',#91478); +#91478 = CARTESIAN_POINT('',(-0.625,2.49,0.2)); +#91479 = LINE('',#91480,#91481); +#91480 = CARTESIAN_POINT('',(-0.625,2.49,1.E-02)); +#91481 = VECTOR('',#91482,1.); +#91482 = DIRECTION('',(0.,0.,1.)); +#91483 = ORIENTED_EDGE('',*,*,#91484,.T.); +#91484 = EDGE_CURVE('',#91477,#91485,#91487,.T.); +#91485 = VERTEX_POINT('',#91486); +#91486 = CARTESIAN_POINT('',(-0.375,2.49,0.2)); +#91487 = LINE('',#91488,#91489); +#91488 = CARTESIAN_POINT('',(-1.3075,2.49,0.2)); +#91489 = VECTOR('',#91490,1.); +#91490 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91491 = ORIENTED_EDGE('',*,*,#91492,.T.); +#91492 = EDGE_CURVE('',#91485,#91359,#91493,.T.); +#91493 = LINE('',#91494,#91495); +#91494 = CARTESIAN_POINT('',(-0.375,2.49,1.E-02)); +#91495 = VECTOR('',#91496,1.); +#91496 = DIRECTION('',(-0.,0.,-1.)); +#91497 = ORIENTED_EDGE('',*,*,#91358,.T.); +#91498 = ORIENTED_EDGE('',*,*,#91499,.T.); +#91499 = EDGE_CURVE('',#91351,#91500,#91502,.T.); +#91500 = VERTEX_POINT('',#91501); +#91501 = CARTESIAN_POINT('',(-0.125,2.49,0.2)); +#91502 = LINE('',#91503,#91504); +#91503 = CARTESIAN_POINT('',(-0.125,2.49,1.E-02)); +#91504 = VECTOR('',#91505,1.); +#91505 = DIRECTION('',(0.,0.,1.)); +#91506 = ORIENTED_EDGE('',*,*,#91507,.T.); +#91507 = EDGE_CURVE('',#91500,#91508,#91510,.T.); +#91508 = VERTEX_POINT('',#91509); +#91509 = CARTESIAN_POINT('',(0.125,2.49,0.2)); +#91510 = LINE('',#91511,#91512); +#91511 = CARTESIAN_POINT('',(-1.0575,2.49,0.2)); +#91512 = VECTOR('',#91513,1.); +#91513 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91514 = ORIENTED_EDGE('',*,*,#91515,.T.); +#91515 = EDGE_CURVE('',#91508,#91326,#91516,.T.); +#91516 = LINE('',#91517,#91518); +#91517 = CARTESIAN_POINT('',(0.125,2.49,1.E-02)); +#91518 = VECTOR('',#91519,1.); +#91519 = DIRECTION('',(-0.,0.,-1.)); +#91520 = ORIENTED_EDGE('',*,*,#91325,.T.); +#91521 = ORIENTED_EDGE('',*,*,#91522,.T.); +#91522 = EDGE_CURVE('',#91318,#91523,#91525,.T.); +#91523 = VERTEX_POINT('',#91524); +#91524 = CARTESIAN_POINT('',(0.375,2.49,0.2)); +#91525 = LINE('',#91526,#91527); +#91526 = CARTESIAN_POINT('',(0.375,2.49,1.E-02)); +#91527 = VECTOR('',#91528,1.); +#91528 = DIRECTION('',(0.,0.,1.)); +#91529 = ORIENTED_EDGE('',*,*,#91530,.T.); +#91530 = EDGE_CURVE('',#91523,#91531,#91533,.T.); +#91531 = VERTEX_POINT('',#91532); +#91532 = CARTESIAN_POINT('',(0.625,2.49,0.2)); +#91533 = LINE('',#91534,#91535); +#91534 = CARTESIAN_POINT('',(-0.8075,2.49,0.2)); +#91535 = VECTOR('',#91536,1.); +#91536 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91537 = ORIENTED_EDGE('',*,*,#91538,.T.); +#91538 = EDGE_CURVE('',#91531,#91293,#91539,.T.); +#91539 = LINE('',#91540,#91541); +#91540 = CARTESIAN_POINT('',(0.625,2.49,1.E-02)); +#91541 = VECTOR('',#91542,1.); +#91542 = DIRECTION('',(-0.,0.,-1.)); +#91543 = ORIENTED_EDGE('',*,*,#91292,.T.); +#91544 = ORIENTED_EDGE('',*,*,#91545,.T.); +#91545 = EDGE_CURVE('',#91285,#91546,#91548,.T.); +#91546 = VERTEX_POINT('',#91547); +#91547 = CARTESIAN_POINT('',(0.875,2.49,0.2)); +#91548 = LINE('',#91549,#91550); +#91549 = CARTESIAN_POINT('',(0.875,2.49,1.E-02)); +#91550 = VECTOR('',#91551,1.); +#91551 = DIRECTION('',(0.,0.,1.)); +#91552 = ORIENTED_EDGE('',*,*,#91553,.T.); +#91553 = EDGE_CURVE('',#91546,#91554,#91556,.T.); +#91554 = VERTEX_POINT('',#91555); +#91555 = CARTESIAN_POINT('',(1.125,2.49,0.2)); +#91556 = LINE('',#91557,#91558); +#91557 = CARTESIAN_POINT('',(-0.5575,2.49,0.2)); +#91558 = VECTOR('',#91559,1.); +#91559 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91560 = ORIENTED_EDGE('',*,*,#91561,.T.); +#91561 = EDGE_CURVE('',#91554,#91260,#91562,.T.); +#91562 = LINE('',#91563,#91564); +#91563 = CARTESIAN_POINT('',(1.125,2.49,1.E-02)); +#91564 = VECTOR('',#91565,1.); +#91565 = DIRECTION('',(-0.,0.,-1.)); +#91566 = ORIENTED_EDGE('',*,*,#91259,.T.); +#91567 = ORIENTED_EDGE('',*,*,#91568,.T.); +#91568 = EDGE_CURVE('',#91252,#91453,#91569,.T.); +#91569 = LINE('',#91570,#91571); +#91570 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91571 = VECTOR('',#91572,1.); +#91572 = DIRECTION('',(0.,0.,1.)); +#91573 = PLANE('',#91574); +#91574 = AXIS2_PLACEMENT_3D('',#91575,#91576,#91577); +#91575 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91576 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91577 = DIRECTION('',(0.,0.,1.)); +#91578 = ADVANCED_FACE('',(#91579),#91585,.F.); +#91579 = FACE_BOUND('',#91580,.F.); +#91580 = EDGE_LOOP('',(#91581,#91582,#91583,#91584)); +#91581 = ORIENTED_EDGE('',*,*,#90480,.F.); +#91582 = ORIENTED_EDGE('',*,*,#90584,.F.); +#91583 = ORIENTED_EDGE('',*,*,#90561,.F.); +#91584 = ORIENTED_EDGE('',*,*,#91468,.F.); +#91585 = PLANE('',#91586); +#91586 = AXIS2_PLACEMENT_3D('',#91587,#91588,#91589); +#91587 = CARTESIAN_POINT('',(-1.125,2.5,0.2)); +#91588 = DIRECTION('',(-0.,0.,-1.)); +#91589 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#91590 = ADVANCED_FACE('',(#91591),#91770,.F.); +#91591 = FACE_BOUND('',#91592,.F.); +#91592 = EDGE_LOOP('',(#91593,#91594,#91595,#91603,#91609,#91610,#91618, + #91626,#91632,#91633,#91641,#91649,#91655,#91656,#91664,#91672, + #91678,#91679,#91687,#91695,#91701,#91702,#91710,#91718,#91724, + #91725,#91733,#91741,#91747,#91748,#91756,#91764)); +#91593 = ORIENTED_EDGE('',*,*,#90608,.F.); +#91594 = ORIENTED_EDGE('',*,*,#91460,.T.); +#91595 = ORIENTED_EDGE('',*,*,#91596,.T.); +#91596 = EDGE_CURVE('',#91451,#91597,#91599,.T.); +#91597 = VERTEX_POINT('',#91598); +#91598 = CARTESIAN_POINT('',(-1.99,-2.49,0.77)); +#91599 = LINE('',#91600,#91601); +#91600 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#91601 = VECTOR('',#91602,1.); +#91602 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91603 = ORIENTED_EDGE('',*,*,#91604,.F.); +#91604 = EDGE_CURVE('',#90840,#91597,#91605,.T.); +#91605 = LINE('',#91606,#91607); +#91606 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#91607 = VECTOR('',#91608,1.); +#91608 = DIRECTION('',(0.,0.,1.)); +#91609 = ORIENTED_EDGE('',*,*,#90839,.F.); +#91610 = ORIENTED_EDGE('',*,*,#91611,.T.); +#91611 = EDGE_CURVE('',#90832,#91612,#91614,.T.); +#91612 = VERTEX_POINT('',#91613); +#91613 = CARTESIAN_POINT('',(-1.99,-1.625,0.2)); +#91614 = LINE('',#91615,#91616); +#91615 = CARTESIAN_POINT('',(-1.99,-1.625,1.E-02)); +#91616 = VECTOR('',#91617,1.); +#91617 = DIRECTION('',(0.,0.,1.)); +#91618 = ORIENTED_EDGE('',*,*,#91619,.T.); +#91619 = EDGE_CURVE('',#91612,#91620,#91622,.T.); +#91620 = VERTEX_POINT('',#91621); +#91621 = CARTESIAN_POINT('',(-1.99,-1.375,0.2)); +#91622 = LINE('',#91623,#91624); +#91623 = CARTESIAN_POINT('',(-1.99,0.4325,0.2)); +#91624 = VECTOR('',#91625,1.); +#91625 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91626 = ORIENTED_EDGE('',*,*,#91627,.T.); +#91627 = EDGE_CURVE('',#91620,#90807,#91628,.T.); +#91628 = LINE('',#91629,#91630); +#91629 = CARTESIAN_POINT('',(-1.99,-1.375,1.E-02)); +#91630 = VECTOR('',#91631,1.); +#91631 = DIRECTION('',(0.,-0.,-1.)); +#91632 = ORIENTED_EDGE('',*,*,#90806,.F.); +#91633 = ORIENTED_EDGE('',*,*,#91634,.T.); +#91634 = EDGE_CURVE('',#90799,#91635,#91637,.T.); +#91635 = VERTEX_POINT('',#91636); +#91636 = CARTESIAN_POINT('',(-1.99,-1.125,0.2)); +#91637 = LINE('',#91638,#91639); +#91638 = CARTESIAN_POINT('',(-1.99,-1.125,1.E-02)); +#91639 = VECTOR('',#91640,1.); +#91640 = DIRECTION('',(0.,0.,1.)); +#91641 = ORIENTED_EDGE('',*,*,#91642,.T.); +#91642 = EDGE_CURVE('',#91635,#91643,#91645,.T.); +#91643 = VERTEX_POINT('',#91644); +#91644 = CARTESIAN_POINT('',(-1.99,-0.875,0.2)); +#91645 = LINE('',#91646,#91647); +#91646 = CARTESIAN_POINT('',(-1.99,0.6825,0.2)); +#91647 = VECTOR('',#91648,1.); +#91648 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91649 = ORIENTED_EDGE('',*,*,#91650,.T.); +#91650 = EDGE_CURVE('',#91643,#90774,#91651,.T.); +#91651 = LINE('',#91652,#91653); +#91652 = CARTESIAN_POINT('',(-1.99,-0.875,1.E-02)); +#91653 = VECTOR('',#91654,1.); +#91654 = DIRECTION('',(0.,-0.,-1.)); +#91655 = ORIENTED_EDGE('',*,*,#90773,.F.); +#91656 = ORIENTED_EDGE('',*,*,#91657,.T.); +#91657 = EDGE_CURVE('',#90766,#91658,#91660,.T.); +#91658 = VERTEX_POINT('',#91659); +#91659 = CARTESIAN_POINT('',(-1.99,-0.625,0.2)); +#91660 = LINE('',#91661,#91662); +#91661 = CARTESIAN_POINT('',(-1.99,-0.625,1.E-02)); +#91662 = VECTOR('',#91663,1.); +#91663 = DIRECTION('',(0.,0.,1.)); +#91664 = ORIENTED_EDGE('',*,*,#91665,.T.); +#91665 = EDGE_CURVE('',#91658,#91666,#91668,.T.); +#91666 = VERTEX_POINT('',#91667); +#91667 = CARTESIAN_POINT('',(-1.99,-0.375,0.2)); +#91668 = LINE('',#91669,#91670); +#91669 = CARTESIAN_POINT('',(-1.99,0.9325,0.2)); +#91670 = VECTOR('',#91671,1.); +#91671 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91672 = ORIENTED_EDGE('',*,*,#91673,.T.); +#91673 = EDGE_CURVE('',#91666,#90741,#91674,.T.); +#91674 = LINE('',#91675,#91676); +#91675 = CARTESIAN_POINT('',(-1.99,-0.375,1.E-02)); +#91676 = VECTOR('',#91677,1.); +#91677 = DIRECTION('',(0.,-0.,-1.)); +#91678 = ORIENTED_EDGE('',*,*,#90740,.F.); +#91679 = ORIENTED_EDGE('',*,*,#91680,.T.); +#91680 = EDGE_CURVE('',#90733,#91681,#91683,.T.); +#91681 = VERTEX_POINT('',#91682); +#91682 = CARTESIAN_POINT('',(-1.99,-0.125,0.2)); +#91683 = LINE('',#91684,#91685); +#91684 = CARTESIAN_POINT('',(-1.99,-0.125,1.E-02)); +#91685 = VECTOR('',#91686,1.); +#91686 = DIRECTION('',(0.,0.,1.)); +#91687 = ORIENTED_EDGE('',*,*,#91688,.T.); +#91688 = EDGE_CURVE('',#91681,#91689,#91691,.T.); +#91689 = VERTEX_POINT('',#91690); +#91690 = CARTESIAN_POINT('',(-1.99,0.125,0.2)); +#91691 = LINE('',#91692,#91693); +#91692 = CARTESIAN_POINT('',(-1.99,1.1825,0.2)); +#91693 = VECTOR('',#91694,1.); +#91694 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91695 = ORIENTED_EDGE('',*,*,#91696,.T.); +#91696 = EDGE_CURVE('',#91689,#90708,#91697,.T.); +#91697 = LINE('',#91698,#91699); +#91698 = CARTESIAN_POINT('',(-1.99,0.125,1.E-02)); +#91699 = VECTOR('',#91700,1.); +#91700 = DIRECTION('',(0.,-0.,-1.)); +#91701 = ORIENTED_EDGE('',*,*,#90707,.F.); +#91702 = ORIENTED_EDGE('',*,*,#91703,.T.); +#91703 = EDGE_CURVE('',#90700,#91704,#91706,.T.); +#91704 = VERTEX_POINT('',#91705); +#91705 = CARTESIAN_POINT('',(-1.99,0.375,0.2)); +#91706 = LINE('',#91707,#91708); +#91707 = CARTESIAN_POINT('',(-1.99,0.375,1.E-02)); +#91708 = VECTOR('',#91709,1.); +#91709 = DIRECTION('',(0.,0.,1.)); +#91710 = ORIENTED_EDGE('',*,*,#91711,.T.); +#91711 = EDGE_CURVE('',#91704,#91712,#91714,.T.); +#91712 = VERTEX_POINT('',#91713); +#91713 = CARTESIAN_POINT('',(-1.99,0.625,0.2)); +#91714 = LINE('',#91715,#91716); +#91715 = CARTESIAN_POINT('',(-1.99,1.4325,0.2)); +#91716 = VECTOR('',#91717,1.); +#91717 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91718 = ORIENTED_EDGE('',*,*,#91719,.T.); +#91719 = EDGE_CURVE('',#91712,#90675,#91720,.T.); +#91720 = LINE('',#91721,#91722); +#91721 = CARTESIAN_POINT('',(-1.99,0.625,1.E-02)); +#91722 = VECTOR('',#91723,1.); +#91723 = DIRECTION('',(0.,-0.,-1.)); +#91724 = ORIENTED_EDGE('',*,*,#90674,.F.); +#91725 = ORIENTED_EDGE('',*,*,#91726,.T.); +#91726 = EDGE_CURVE('',#90667,#91727,#91729,.T.); +#91727 = VERTEX_POINT('',#91728); +#91728 = CARTESIAN_POINT('',(-1.99,0.875,0.2)); +#91729 = LINE('',#91730,#91731); +#91730 = CARTESIAN_POINT('',(-1.99,0.875,1.E-02)); +#91731 = VECTOR('',#91732,1.); +#91732 = DIRECTION('',(0.,0.,1.)); +#91733 = ORIENTED_EDGE('',*,*,#91734,.T.); +#91734 = EDGE_CURVE('',#91727,#91735,#91737,.T.); +#91735 = VERTEX_POINT('',#91736); +#91736 = CARTESIAN_POINT('',(-1.99,1.125,0.2)); +#91737 = LINE('',#91738,#91739); +#91738 = CARTESIAN_POINT('',(-1.99,1.6825,0.2)); +#91739 = VECTOR('',#91740,1.); +#91740 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91741 = ORIENTED_EDGE('',*,*,#91742,.T.); +#91742 = EDGE_CURVE('',#91735,#90642,#91743,.T.); +#91743 = LINE('',#91744,#91745); +#91744 = CARTESIAN_POINT('',(-1.99,1.125,1.E-02)); +#91745 = VECTOR('',#91746,1.); +#91746 = DIRECTION('',(0.,-0.,-1.)); +#91747 = ORIENTED_EDGE('',*,*,#90641,.F.); +#91748 = ORIENTED_EDGE('',*,*,#91749,.T.); +#91749 = EDGE_CURVE('',#90634,#91750,#91752,.T.); +#91750 = VERTEX_POINT('',#91751); +#91751 = CARTESIAN_POINT('',(-1.99,1.375,0.2)); +#91752 = LINE('',#91753,#91754); +#91753 = CARTESIAN_POINT('',(-1.99,1.375,1.E-02)); +#91754 = VECTOR('',#91755,1.); +#91755 = DIRECTION('',(0.,0.,1.)); +#91756 = ORIENTED_EDGE('',*,*,#91757,.T.); +#91757 = EDGE_CURVE('',#91750,#91758,#91760,.T.); +#91758 = VERTEX_POINT('',#91759); +#91759 = CARTESIAN_POINT('',(-1.99,1.625,0.2)); +#91760 = LINE('',#91761,#91762); +#91761 = CARTESIAN_POINT('',(-1.99,1.9325,0.2)); +#91762 = VECTOR('',#91763,1.); +#91763 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91764 = ORIENTED_EDGE('',*,*,#91765,.T.); +#91765 = EDGE_CURVE('',#91758,#90609,#91766,.T.); +#91766 = LINE('',#91767,#91768); +#91767 = CARTESIAN_POINT('',(-1.99,1.625,1.E-02)); +#91768 = VECTOR('',#91769,1.); +#91769 = DIRECTION('',(0.,-0.,-1.)); +#91770 = PLANE('',#91771); +#91771 = AXIS2_PLACEMENT_3D('',#91772,#91773,#91774); +#91772 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91773 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91774 = DIRECTION('',(0.,0.,1.)); +#91775 = ADVANCED_FACE('',(#91776),#91810,.F.); +#91776 = FACE_BOUND('',#91777,.F.); +#91777 = EDGE_LOOP('',(#91778,#91788,#91794,#91795,#91796,#91804)); +#91778 = ORIENTED_EDGE('',*,*,#91779,.F.); +#91779 = EDGE_CURVE('',#91780,#91782,#91784,.T.); +#91780 = VERTEX_POINT('',#91781); +#91781 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91782 = VERTEX_POINT('',#91783); +#91783 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#91784 = LINE('',#91785,#91786); +#91785 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91786 = VECTOR('',#91787,1.); +#91787 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91788 = ORIENTED_EDGE('',*,*,#91789,.T.); +#91789 = EDGE_CURVE('',#91780,#90617,#91790,.T.); +#91790 = LINE('',#91791,#91792); +#91791 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91792 = VECTOR('',#91793,1.); +#91793 = DIRECTION('',(0.,0.,1.)); +#91794 = ORIENTED_EDGE('',*,*,#90616,.F.); +#91795 = ORIENTED_EDGE('',*,*,#91765,.F.); +#91796 = ORIENTED_EDGE('',*,*,#91797,.T.); +#91797 = EDGE_CURVE('',#91758,#91798,#91800,.T.); +#91798 = VERTEX_POINT('',#91799); +#91799 = CARTESIAN_POINT('',(-2.,1.625,0.2)); +#91800 = LINE('',#91801,#91802); +#91801 = CARTESIAN_POINT('',(-1.725,1.625,0.2)); +#91802 = VECTOR('',#91803,1.); +#91803 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91804 = ORIENTED_EDGE('',*,*,#91805,.F.); +#91805 = EDGE_CURVE('',#91782,#91798,#91806,.T.); +#91806 = LINE('',#91807,#91808); +#91807 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#91808 = VECTOR('',#91809,1.); +#91809 = DIRECTION('',(0.,0.,1.)); +#91810 = PLANE('',#91811); +#91811 = AXIS2_PLACEMENT_3D('',#91812,#91813,#91814); +#91812 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91813 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91814 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91815 = ADVANCED_FACE('',(#91816),#91835,.T.); +#91816 = FACE_BOUND('',#91817,.T.); +#91817 = EDGE_LOOP('',(#91818,#91819,#91820,#91828)); +#91818 = ORIENTED_EDGE('',*,*,#91789,.T.); +#91819 = ORIENTED_EDGE('',*,*,#90624,.T.); +#91820 = ORIENTED_EDGE('',*,*,#91821,.F.); +#91821 = EDGE_CURVE('',#91822,#90625,#91824,.T.); +#91822 = VERTEX_POINT('',#91823); +#91823 = CARTESIAN_POINT('',(-1.725,1.375,0.)); +#91824 = LINE('',#91825,#91826); +#91825 = CARTESIAN_POINT('',(-1.725,1.375,0.)); +#91826 = VECTOR('',#91827,1.); +#91827 = DIRECTION('',(0.,0.,1.)); +#91828 = ORIENTED_EDGE('',*,*,#91829,.T.); +#91829 = EDGE_CURVE('',#91822,#91780,#91830,.T.); +#91830 = CIRCLE('',#91831,0.125); +#91831 = AXIS2_PLACEMENT_3D('',#91832,#91833,#91834); +#91832 = CARTESIAN_POINT('',(-1.725,1.5,0.)); +#91833 = DIRECTION('',(0.,0.,1.)); +#91834 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91835 = CYLINDRICAL_SURFACE('',#91836,0.125); +#91836 = AXIS2_PLACEMENT_3D('',#91837,#91838,#91839); +#91837 = CARTESIAN_POINT('',(-1.725,1.5,0.)); +#91838 = DIRECTION('',(0.,0.,-1.)); +#91839 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#91840 = ADVANCED_FACE('',(#91841),#91868,.F.); +#91841 = FACE_BOUND('',#91842,.F.); +#91842 = EDGE_LOOP('',(#91843,#91851,#91859,#91865,#91866,#91867)); +#91843 = ORIENTED_EDGE('',*,*,#91844,.F.); +#91844 = EDGE_CURVE('',#91845,#91822,#91847,.T.); +#91845 = VERTEX_POINT('',#91846); +#91846 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91847 = LINE('',#91848,#91849); +#91848 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91849 = VECTOR('',#91850,1.); +#91850 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#91851 = ORIENTED_EDGE('',*,*,#91852,.T.); +#91852 = EDGE_CURVE('',#91845,#91853,#91855,.T.); +#91853 = VERTEX_POINT('',#91854); +#91854 = CARTESIAN_POINT('',(-2.,1.375,0.2)); +#91855 = LINE('',#91856,#91857); +#91856 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91857 = VECTOR('',#91858,1.); +#91858 = DIRECTION('',(0.,0.,1.)); +#91859 = ORIENTED_EDGE('',*,*,#91860,.T.); +#91860 = EDGE_CURVE('',#91853,#91750,#91861,.T.); +#91861 = LINE('',#91862,#91863); +#91862 = CARTESIAN_POINT('',(-2.,1.375,0.2)); +#91863 = VECTOR('',#91864,1.); +#91864 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#91865 = ORIENTED_EDGE('',*,*,#91749,.F.); +#91866 = ORIENTED_EDGE('',*,*,#90633,.F.); +#91867 = ORIENTED_EDGE('',*,*,#91821,.F.); +#91868 = PLANE('',#91869); +#91869 = AXIS2_PLACEMENT_3D('',#91870,#91871,#91872); +#91870 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91871 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#91872 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#91873 = ADVANCED_FACE('',(#91874),#91908,.F.); +#91874 = FACE_BOUND('',#91875,.F.); +#91875 = EDGE_LOOP('',(#91876,#91886,#91894,#91900,#91901,#91902)); +#91876 = ORIENTED_EDGE('',*,*,#91877,.F.); +#91877 = EDGE_CURVE('',#91878,#91880,#91882,.T.); +#91878 = VERTEX_POINT('',#91879); +#91879 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91880 = VERTEX_POINT('',#91881); +#91881 = CARTESIAN_POINT('',(-0.625,2.225,0.)); +#91882 = LINE('',#91883,#91884); +#91883 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91884 = VECTOR('',#91885,1.); +#91885 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91886 = ORIENTED_EDGE('',*,*,#91887,.T.); +#91887 = EDGE_CURVE('',#91878,#91888,#91890,.T.); +#91888 = VERTEX_POINT('',#91889); +#91889 = CARTESIAN_POINT('',(-0.625,2.5,0.2)); +#91890 = LINE('',#91891,#91892); +#91891 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91892 = VECTOR('',#91893,1.); +#91893 = DIRECTION('',(0.,0.,1.)); +#91894 = ORIENTED_EDGE('',*,*,#91895,.T.); +#91895 = EDGE_CURVE('',#91888,#91477,#91896,.T.); +#91896 = LINE('',#91897,#91898); +#91897 = CARTESIAN_POINT('',(-0.625,2.5,0.2)); +#91898 = VECTOR('',#91899,1.); +#91899 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91900 = ORIENTED_EDGE('',*,*,#91476,.F.); +#91901 = ORIENTED_EDGE('',*,*,#91383,.F.); +#91902 = ORIENTED_EDGE('',*,*,#91903,.F.); +#91903 = EDGE_CURVE('',#91880,#91375,#91904,.T.); +#91904 = LINE('',#91905,#91906); +#91905 = CARTESIAN_POINT('',(-0.625,2.225,0.)); +#91906 = VECTOR('',#91907,1.); +#91907 = DIRECTION('',(0.,0.,1.)); +#91908 = PLANE('',#91909); +#91909 = AXIS2_PLACEMENT_3D('',#91910,#91911,#91912); +#91910 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91911 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#91912 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91913 = ADVANCED_FACE('',(#91914),#91948,.F.); +#91914 = FACE_BOUND('',#91915,.F.); +#91915 = EDGE_LOOP('',(#91916,#91926,#91932,#91933,#91934,#91942)); +#91916 = ORIENTED_EDGE('',*,*,#91917,.F.); +#91917 = EDGE_CURVE('',#91918,#91920,#91922,.T.); +#91918 = VERTEX_POINT('',#91919); +#91919 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91920 = VERTEX_POINT('',#91921); +#91921 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#91922 = LINE('',#91923,#91924); +#91923 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91924 = VECTOR('',#91925,1.); +#91925 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91926 = ORIENTED_EDGE('',*,*,#91927,.T.); +#91927 = EDGE_CURVE('',#91918,#90650,#91928,.T.); +#91928 = LINE('',#91929,#91930); +#91929 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91930 = VECTOR('',#91931,1.); +#91931 = DIRECTION('',(0.,0.,1.)); +#91932 = ORIENTED_EDGE('',*,*,#90649,.F.); +#91933 = ORIENTED_EDGE('',*,*,#91742,.F.); +#91934 = ORIENTED_EDGE('',*,*,#91935,.T.); +#91935 = EDGE_CURVE('',#91735,#91936,#91938,.T.); +#91936 = VERTEX_POINT('',#91937); +#91937 = CARTESIAN_POINT('',(-2.,1.125,0.2)); +#91938 = LINE('',#91939,#91940); +#91939 = CARTESIAN_POINT('',(-1.725,1.125,0.2)); +#91940 = VECTOR('',#91941,1.); +#91941 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91942 = ORIENTED_EDGE('',*,*,#91943,.F.); +#91943 = EDGE_CURVE('',#91920,#91936,#91944,.T.); +#91944 = LINE('',#91945,#91946); +#91945 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#91946 = VECTOR('',#91947,1.); +#91947 = DIRECTION('',(0.,0.,1.)); +#91948 = PLANE('',#91949); +#91949 = AXIS2_PLACEMENT_3D('',#91950,#91951,#91952); +#91950 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91951 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91952 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91953 = ADVANCED_FACE('',(#91954),#91973,.T.); +#91954 = FACE_BOUND('',#91955,.T.); +#91955 = EDGE_LOOP('',(#91956,#91964,#91965,#91966)); +#91956 = ORIENTED_EDGE('',*,*,#91957,.T.); +#91957 = EDGE_CURVE('',#91958,#91367,#91960,.T.); +#91958 = VERTEX_POINT('',#91959); +#91959 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#91960 = LINE('',#91961,#91962); +#91961 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#91962 = VECTOR('',#91963,1.); +#91963 = DIRECTION('',(0.,0.,1.)); +#91964 = ORIENTED_EDGE('',*,*,#91374,.T.); +#91965 = ORIENTED_EDGE('',*,*,#91903,.F.); +#91966 = ORIENTED_EDGE('',*,*,#91967,.T.); +#91967 = EDGE_CURVE('',#91880,#91958,#91968,.T.); +#91968 = CIRCLE('',#91969,0.125); +#91969 = AXIS2_PLACEMENT_3D('',#91970,#91971,#91972); +#91970 = CARTESIAN_POINT('',(-0.5,2.225,0.)); +#91971 = DIRECTION('',(0.,0.,1.)); +#91972 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91973 = CYLINDRICAL_SURFACE('',#91974,0.125); +#91974 = AXIS2_PLACEMENT_3D('',#91975,#91976,#91977); +#91975 = CARTESIAN_POINT('',(-0.5,2.225,0.)); +#91976 = DIRECTION('',(0.,0.,-1.)); +#91977 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91978 = ADVANCED_FACE('',(#91979),#91998,.T.); +#91979 = FACE_BOUND('',#91980,.T.); +#91980 = EDGE_LOOP('',(#91981,#91982,#91983,#91991)); +#91981 = ORIENTED_EDGE('',*,*,#91927,.T.); +#91982 = ORIENTED_EDGE('',*,*,#90657,.T.); +#91983 = ORIENTED_EDGE('',*,*,#91984,.F.); +#91984 = EDGE_CURVE('',#91985,#90658,#91987,.T.); +#91985 = VERTEX_POINT('',#91986); +#91986 = CARTESIAN_POINT('',(-1.725,0.875,0.)); +#91987 = LINE('',#91988,#91989); +#91988 = CARTESIAN_POINT('',(-1.725,0.875,0.)); +#91989 = VECTOR('',#91990,1.); +#91990 = DIRECTION('',(0.,0.,1.)); +#91991 = ORIENTED_EDGE('',*,*,#91992,.T.); +#91992 = EDGE_CURVE('',#91985,#91918,#91993,.T.); +#91993 = CIRCLE('',#91994,0.125); +#91994 = AXIS2_PLACEMENT_3D('',#91995,#91996,#91997); +#91995 = CARTESIAN_POINT('',(-1.725,1.,0.)); +#91996 = DIRECTION('',(0.,0.,1.)); +#91997 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91998 = CYLINDRICAL_SURFACE('',#91999,0.125); +#91999 = AXIS2_PLACEMENT_3D('',#92000,#92001,#92002); +#92000 = CARTESIAN_POINT('',(-1.725,1.,0.)); +#92001 = DIRECTION('',(0.,0.,-1.)); +#92002 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92003 = ADVANCED_FACE('',(#92004),#92031,.F.); +#92004 = FACE_BOUND('',#92005,.F.); +#92005 = EDGE_LOOP('',(#92006,#92014,#92015,#92016,#92017,#92025)); +#92006 = ORIENTED_EDGE('',*,*,#92007,.F.); +#92007 = EDGE_CURVE('',#91958,#92008,#92010,.T.); +#92008 = VERTEX_POINT('',#92009); +#92009 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#92010 = LINE('',#92011,#92012); +#92011 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#92012 = VECTOR('',#92013,1.); +#92013 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92014 = ORIENTED_EDGE('',*,*,#91957,.T.); +#92015 = ORIENTED_EDGE('',*,*,#91366,.F.); +#92016 = ORIENTED_EDGE('',*,*,#91492,.F.); +#92017 = ORIENTED_EDGE('',*,*,#92018,.T.); +#92018 = EDGE_CURVE('',#91485,#92019,#92021,.T.); +#92019 = VERTEX_POINT('',#92020); +#92020 = CARTESIAN_POINT('',(-0.375,2.5,0.2)); +#92021 = LINE('',#92022,#92023); +#92022 = CARTESIAN_POINT('',(-0.375,2.225,0.2)); +#92023 = VECTOR('',#92024,1.); +#92024 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92025 = ORIENTED_EDGE('',*,*,#92026,.F.); +#92026 = EDGE_CURVE('',#92008,#92019,#92027,.T.); +#92027 = LINE('',#92028,#92029); +#92028 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#92029 = VECTOR('',#92030,1.); +#92030 = DIRECTION('',(0.,0.,1.)); +#92031 = PLANE('',#92032); +#92032 = AXIS2_PLACEMENT_3D('',#92033,#92034,#92035); +#92033 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#92034 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92035 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92036 = ADVANCED_FACE('',(#92037),#92064,.F.); +#92037 = FACE_BOUND('',#92038,.F.); +#92038 = EDGE_LOOP('',(#92039,#92047,#92055,#92061,#92062,#92063)); +#92039 = ORIENTED_EDGE('',*,*,#92040,.F.); +#92040 = EDGE_CURVE('',#92041,#91985,#92043,.T.); +#92041 = VERTEX_POINT('',#92042); +#92042 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92043 = LINE('',#92044,#92045); +#92044 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92045 = VECTOR('',#92046,1.); +#92046 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92047 = ORIENTED_EDGE('',*,*,#92048,.T.); +#92048 = EDGE_CURVE('',#92041,#92049,#92051,.T.); +#92049 = VERTEX_POINT('',#92050); +#92050 = CARTESIAN_POINT('',(-2.,0.875,0.2)); +#92051 = LINE('',#92052,#92053); +#92052 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92053 = VECTOR('',#92054,1.); +#92054 = DIRECTION('',(0.,0.,1.)); +#92055 = ORIENTED_EDGE('',*,*,#92056,.T.); +#92056 = EDGE_CURVE('',#92049,#91727,#92057,.T.); +#92057 = LINE('',#92058,#92059); +#92058 = CARTESIAN_POINT('',(-2.,0.875,0.2)); +#92059 = VECTOR('',#92060,1.); +#92060 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92061 = ORIENTED_EDGE('',*,*,#91726,.F.); +#92062 = ORIENTED_EDGE('',*,*,#90666,.F.); +#92063 = ORIENTED_EDGE('',*,*,#91984,.F.); +#92064 = PLANE('',#92065); +#92065 = AXIS2_PLACEMENT_3D('',#92066,#92067,#92068); +#92066 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92067 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92068 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92069 = ADVANCED_FACE('',(#92070),#92104,.F.); +#92070 = FACE_BOUND('',#92071,.F.); +#92071 = EDGE_LOOP('',(#92072,#92082,#92090,#92096,#92097,#92098)); +#92072 = ORIENTED_EDGE('',*,*,#92073,.F.); +#92073 = EDGE_CURVE('',#92074,#92076,#92078,.T.); +#92074 = VERTEX_POINT('',#92075); +#92075 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92076 = VERTEX_POINT('',#92077); +#92077 = CARTESIAN_POINT('',(-0.125,2.225,0.)); +#92078 = LINE('',#92079,#92080); +#92079 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92080 = VECTOR('',#92081,1.); +#92081 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92082 = ORIENTED_EDGE('',*,*,#92083,.T.); +#92083 = EDGE_CURVE('',#92074,#92084,#92086,.T.); +#92084 = VERTEX_POINT('',#92085); +#92085 = CARTESIAN_POINT('',(-0.125,2.5,0.2)); +#92086 = LINE('',#92087,#92088); +#92087 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92088 = VECTOR('',#92089,1.); +#92089 = DIRECTION('',(0.,0.,1.)); +#92090 = ORIENTED_EDGE('',*,*,#92091,.T.); +#92091 = EDGE_CURVE('',#92084,#91500,#92092,.T.); +#92092 = LINE('',#92093,#92094); +#92093 = CARTESIAN_POINT('',(-0.125,2.5,0.2)); +#92094 = VECTOR('',#92095,1.); +#92095 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92096 = ORIENTED_EDGE('',*,*,#91499,.F.); +#92097 = ORIENTED_EDGE('',*,*,#91350,.F.); +#92098 = ORIENTED_EDGE('',*,*,#92099,.F.); +#92099 = EDGE_CURVE('',#92076,#91342,#92100,.T.); +#92100 = LINE('',#92101,#92102); +#92101 = CARTESIAN_POINT('',(-0.125,2.225,0.)); +#92102 = VECTOR('',#92103,1.); +#92103 = DIRECTION('',(0.,0.,1.)); +#92104 = PLANE('',#92105); +#92105 = AXIS2_PLACEMENT_3D('',#92106,#92107,#92108); +#92106 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92107 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#92108 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92109 = ADVANCED_FACE('',(#92110),#92144,.F.); +#92110 = FACE_BOUND('',#92111,.F.); +#92111 = EDGE_LOOP('',(#92112,#92122,#92128,#92129,#92130,#92138)); +#92112 = ORIENTED_EDGE('',*,*,#92113,.F.); +#92113 = EDGE_CURVE('',#92114,#92116,#92118,.T.); +#92114 = VERTEX_POINT('',#92115); +#92115 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92116 = VERTEX_POINT('',#92117); +#92117 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#92118 = LINE('',#92119,#92120); +#92119 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92120 = VECTOR('',#92121,1.); +#92121 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92122 = ORIENTED_EDGE('',*,*,#92123,.T.); +#92123 = EDGE_CURVE('',#92114,#90683,#92124,.T.); +#92124 = LINE('',#92125,#92126); +#92125 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92126 = VECTOR('',#92127,1.); +#92127 = DIRECTION('',(0.,0.,1.)); +#92128 = ORIENTED_EDGE('',*,*,#90682,.F.); +#92129 = ORIENTED_EDGE('',*,*,#91719,.F.); +#92130 = ORIENTED_EDGE('',*,*,#92131,.T.); +#92131 = EDGE_CURVE('',#91712,#92132,#92134,.T.); +#92132 = VERTEX_POINT('',#92133); +#92133 = CARTESIAN_POINT('',(-2.,0.625,0.2)); +#92134 = LINE('',#92135,#92136); +#92135 = CARTESIAN_POINT('',(-1.725,0.625,0.2)); +#92136 = VECTOR('',#92137,1.); +#92137 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92138 = ORIENTED_EDGE('',*,*,#92139,.F.); +#92139 = EDGE_CURVE('',#92116,#92132,#92140,.T.); +#92140 = LINE('',#92141,#92142); +#92141 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#92142 = VECTOR('',#92143,1.); +#92143 = DIRECTION('',(0.,0.,1.)); +#92144 = PLANE('',#92145); +#92145 = AXIS2_PLACEMENT_3D('',#92146,#92147,#92148); +#92146 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92147 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92148 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92149 = ADVANCED_FACE('',(#92150),#92169,.T.); +#92150 = FACE_BOUND('',#92151,.T.); +#92151 = EDGE_LOOP('',(#92152,#92160,#92161,#92162)); +#92152 = ORIENTED_EDGE('',*,*,#92153,.T.); +#92153 = EDGE_CURVE('',#92154,#91334,#92156,.T.); +#92154 = VERTEX_POINT('',#92155); +#92155 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92156 = LINE('',#92157,#92158); +#92157 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92158 = VECTOR('',#92159,1.); +#92159 = DIRECTION('',(0.,0.,1.)); +#92160 = ORIENTED_EDGE('',*,*,#91341,.T.); +#92161 = ORIENTED_EDGE('',*,*,#92099,.F.); +#92162 = ORIENTED_EDGE('',*,*,#92163,.T.); +#92163 = EDGE_CURVE('',#92076,#92154,#92164,.T.); +#92164 = CIRCLE('',#92165,0.125); +#92165 = AXIS2_PLACEMENT_3D('',#92166,#92167,#92168); +#92166 = CARTESIAN_POINT('',(6.661338147751E-16,2.225,0.)); +#92167 = DIRECTION('',(0.,0.,1.)); +#92168 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92169 = CYLINDRICAL_SURFACE('',#92170,0.125); +#92170 = AXIS2_PLACEMENT_3D('',#92171,#92172,#92173); +#92171 = CARTESIAN_POINT('',(6.661338147751E-16,2.225,0.)); +#92172 = DIRECTION('',(0.,0.,-1.)); +#92173 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92174 = ADVANCED_FACE('',(#92175),#92194,.T.); +#92175 = FACE_BOUND('',#92176,.T.); +#92176 = EDGE_LOOP('',(#92177,#92178,#92179,#92187)); +#92177 = ORIENTED_EDGE('',*,*,#92123,.T.); +#92178 = ORIENTED_EDGE('',*,*,#90690,.T.); +#92179 = ORIENTED_EDGE('',*,*,#92180,.F.); +#92180 = EDGE_CURVE('',#92181,#90691,#92183,.T.); +#92181 = VERTEX_POINT('',#92182); +#92182 = CARTESIAN_POINT('',(-1.725,0.375,0.)); +#92183 = LINE('',#92184,#92185); +#92184 = CARTESIAN_POINT('',(-1.725,0.375,0.)); +#92185 = VECTOR('',#92186,1.); +#92186 = DIRECTION('',(0.,0.,1.)); +#92187 = ORIENTED_EDGE('',*,*,#92188,.T.); +#92188 = EDGE_CURVE('',#92181,#92114,#92189,.T.); +#92189 = CIRCLE('',#92190,0.125); +#92190 = AXIS2_PLACEMENT_3D('',#92191,#92192,#92193); +#92191 = CARTESIAN_POINT('',(-1.725,0.5,0.)); +#92192 = DIRECTION('',(0.,0.,1.)); +#92193 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92194 = CYLINDRICAL_SURFACE('',#92195,0.125); +#92195 = AXIS2_PLACEMENT_3D('',#92196,#92197,#92198); +#92196 = CARTESIAN_POINT('',(-1.725,0.5,0.)); +#92197 = DIRECTION('',(0.,0.,-1.)); +#92198 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92199 = ADVANCED_FACE('',(#92200),#92227,.F.); +#92200 = FACE_BOUND('',#92201,.F.); +#92201 = EDGE_LOOP('',(#92202,#92210,#92211,#92212,#92213,#92221)); +#92202 = ORIENTED_EDGE('',*,*,#92203,.F.); +#92203 = EDGE_CURVE('',#92154,#92204,#92206,.T.); +#92204 = VERTEX_POINT('',#92205); +#92205 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#92206 = LINE('',#92207,#92208); +#92207 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92208 = VECTOR('',#92209,1.); +#92209 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92210 = ORIENTED_EDGE('',*,*,#92153,.T.); +#92211 = ORIENTED_EDGE('',*,*,#91333,.F.); +#92212 = ORIENTED_EDGE('',*,*,#91515,.F.); +#92213 = ORIENTED_EDGE('',*,*,#92214,.T.); +#92214 = EDGE_CURVE('',#91508,#92215,#92217,.T.); +#92215 = VERTEX_POINT('',#92216); +#92216 = CARTESIAN_POINT('',(0.125,2.5,0.2)); +#92217 = LINE('',#92218,#92219); +#92218 = CARTESIAN_POINT('',(0.125,2.225,0.2)); +#92219 = VECTOR('',#92220,1.); +#92220 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92221 = ORIENTED_EDGE('',*,*,#92222,.F.); +#92222 = EDGE_CURVE('',#92204,#92215,#92223,.T.); +#92223 = LINE('',#92224,#92225); +#92224 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#92225 = VECTOR('',#92226,1.); +#92226 = DIRECTION('',(0.,0.,1.)); +#92227 = PLANE('',#92228); +#92228 = AXIS2_PLACEMENT_3D('',#92229,#92230,#92231); +#92229 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92230 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92231 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92232 = ADVANCED_FACE('',(#92233),#92260,.F.); +#92233 = FACE_BOUND('',#92234,.F.); +#92234 = EDGE_LOOP('',(#92235,#92243,#92251,#92257,#92258,#92259)); +#92235 = ORIENTED_EDGE('',*,*,#92236,.F.); +#92236 = EDGE_CURVE('',#92237,#92181,#92239,.T.); +#92237 = VERTEX_POINT('',#92238); +#92238 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92239 = LINE('',#92240,#92241); +#92240 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92241 = VECTOR('',#92242,1.); +#92242 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92243 = ORIENTED_EDGE('',*,*,#92244,.T.); +#92244 = EDGE_CURVE('',#92237,#92245,#92247,.T.); +#92245 = VERTEX_POINT('',#92246); +#92246 = CARTESIAN_POINT('',(-2.,0.375,0.2)); +#92247 = LINE('',#92248,#92249); +#92248 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92249 = VECTOR('',#92250,1.); +#92250 = DIRECTION('',(0.,0.,1.)); +#92251 = ORIENTED_EDGE('',*,*,#92252,.T.); +#92252 = EDGE_CURVE('',#92245,#91704,#92253,.T.); +#92253 = LINE('',#92254,#92255); +#92254 = CARTESIAN_POINT('',(-2.,0.375,0.2)); +#92255 = VECTOR('',#92256,1.); +#92256 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92257 = ORIENTED_EDGE('',*,*,#91703,.F.); +#92258 = ORIENTED_EDGE('',*,*,#90699,.F.); +#92259 = ORIENTED_EDGE('',*,*,#92180,.F.); +#92260 = PLANE('',#92261); +#92261 = AXIS2_PLACEMENT_3D('',#92262,#92263,#92264); +#92262 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92263 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92264 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92265 = ADVANCED_FACE('',(#92266),#92300,.F.); +#92266 = FACE_BOUND('',#92267,.F.); +#92267 = EDGE_LOOP('',(#92268,#92278,#92286,#92292,#92293,#92294)); +#92268 = ORIENTED_EDGE('',*,*,#92269,.F.); +#92269 = EDGE_CURVE('',#92270,#92272,#92274,.T.); +#92270 = VERTEX_POINT('',#92271); +#92271 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92272 = VERTEX_POINT('',#92273); +#92273 = CARTESIAN_POINT('',(0.375,2.225,0.)); +#92274 = LINE('',#92275,#92276); +#92275 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92276 = VECTOR('',#92277,1.); +#92277 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92278 = ORIENTED_EDGE('',*,*,#92279,.T.); +#92279 = EDGE_CURVE('',#92270,#92280,#92282,.T.); +#92280 = VERTEX_POINT('',#92281); +#92281 = CARTESIAN_POINT('',(0.375,2.5,0.2)); +#92282 = LINE('',#92283,#92284); +#92283 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92284 = VECTOR('',#92285,1.); +#92285 = DIRECTION('',(0.,0.,1.)); +#92286 = ORIENTED_EDGE('',*,*,#92287,.T.); +#92287 = EDGE_CURVE('',#92280,#91523,#92288,.T.); +#92288 = LINE('',#92289,#92290); +#92289 = CARTESIAN_POINT('',(0.375,2.5,0.2)); +#92290 = VECTOR('',#92291,1.); +#92291 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92292 = ORIENTED_EDGE('',*,*,#91522,.F.); +#92293 = ORIENTED_EDGE('',*,*,#91317,.F.); +#92294 = ORIENTED_EDGE('',*,*,#92295,.F.); +#92295 = EDGE_CURVE('',#92272,#91309,#92296,.T.); +#92296 = LINE('',#92297,#92298); +#92297 = CARTESIAN_POINT('',(0.375,2.225,0.)); +#92298 = VECTOR('',#92299,1.); +#92299 = DIRECTION('',(0.,0.,1.)); +#92300 = PLANE('',#92301); +#92301 = AXIS2_PLACEMENT_3D('',#92302,#92303,#92304); +#92302 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92303 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#92304 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92305 = ADVANCED_FACE('',(#92306),#92340,.F.); +#92306 = FACE_BOUND('',#92307,.F.); +#92307 = EDGE_LOOP('',(#92308,#92318,#92324,#92325,#92326,#92334)); +#92308 = ORIENTED_EDGE('',*,*,#92309,.F.); +#92309 = EDGE_CURVE('',#92310,#92312,#92314,.T.); +#92310 = VERTEX_POINT('',#92311); +#92311 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92312 = VERTEX_POINT('',#92313); +#92313 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#92314 = LINE('',#92315,#92316); +#92315 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92316 = VECTOR('',#92317,1.); +#92317 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92318 = ORIENTED_EDGE('',*,*,#92319,.T.); +#92319 = EDGE_CURVE('',#92310,#90716,#92320,.T.); +#92320 = LINE('',#92321,#92322); +#92321 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92322 = VECTOR('',#92323,1.); +#92323 = DIRECTION('',(0.,0.,1.)); +#92324 = ORIENTED_EDGE('',*,*,#90715,.F.); +#92325 = ORIENTED_EDGE('',*,*,#91696,.F.); +#92326 = ORIENTED_EDGE('',*,*,#92327,.T.); +#92327 = EDGE_CURVE('',#91689,#92328,#92330,.T.); +#92328 = VERTEX_POINT('',#92329); +#92329 = CARTESIAN_POINT('',(-2.,0.125,0.2)); +#92330 = LINE('',#92331,#92332); +#92331 = CARTESIAN_POINT('',(-1.725,0.125,0.2)); +#92332 = VECTOR('',#92333,1.); +#92333 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92334 = ORIENTED_EDGE('',*,*,#92335,.F.); +#92335 = EDGE_CURVE('',#92312,#92328,#92336,.T.); +#92336 = LINE('',#92337,#92338); +#92337 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#92338 = VECTOR('',#92339,1.); +#92339 = DIRECTION('',(0.,0.,1.)); +#92340 = PLANE('',#92341); +#92341 = AXIS2_PLACEMENT_3D('',#92342,#92343,#92344); +#92342 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92343 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92344 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92345 = ADVANCED_FACE('',(#92346),#92365,.T.); +#92346 = FACE_BOUND('',#92347,.T.); +#92347 = EDGE_LOOP('',(#92348,#92356,#92357,#92358)); +#92348 = ORIENTED_EDGE('',*,*,#92349,.T.); +#92349 = EDGE_CURVE('',#92350,#91301,#92352,.T.); +#92350 = VERTEX_POINT('',#92351); +#92351 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92352 = LINE('',#92353,#92354); +#92353 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92354 = VECTOR('',#92355,1.); +#92355 = DIRECTION('',(0.,0.,1.)); +#92356 = ORIENTED_EDGE('',*,*,#91308,.T.); +#92357 = ORIENTED_EDGE('',*,*,#92295,.F.); +#92358 = ORIENTED_EDGE('',*,*,#92359,.T.); +#92359 = EDGE_CURVE('',#92272,#92350,#92360,.T.); +#92360 = CIRCLE('',#92361,0.125); +#92361 = AXIS2_PLACEMENT_3D('',#92362,#92363,#92364); +#92362 = CARTESIAN_POINT('',(0.5,2.225,0.)); +#92363 = DIRECTION('',(0.,0.,1.)); +#92364 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92365 = CYLINDRICAL_SURFACE('',#92366,0.125); +#92366 = AXIS2_PLACEMENT_3D('',#92367,#92368,#92369); +#92367 = CARTESIAN_POINT('',(0.5,2.225,0.)); +#92368 = DIRECTION('',(0.,0.,-1.)); +#92369 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92370 = ADVANCED_FACE('',(#92371),#92390,.T.); +#92371 = FACE_BOUND('',#92372,.T.); +#92372 = EDGE_LOOP('',(#92373,#92374,#92375,#92383)); +#92373 = ORIENTED_EDGE('',*,*,#92319,.T.); +#92374 = ORIENTED_EDGE('',*,*,#90723,.T.); +#92375 = ORIENTED_EDGE('',*,*,#92376,.F.); +#92376 = EDGE_CURVE('',#92377,#90724,#92379,.T.); +#92377 = VERTEX_POINT('',#92378); +#92378 = CARTESIAN_POINT('',(-1.725,-0.125,0.)); +#92379 = LINE('',#92380,#92381); +#92380 = CARTESIAN_POINT('',(-1.725,-0.125,0.)); +#92381 = VECTOR('',#92382,1.); +#92382 = DIRECTION('',(0.,0.,1.)); +#92383 = ORIENTED_EDGE('',*,*,#92384,.T.); +#92384 = EDGE_CURVE('',#92377,#92310,#92385,.T.); +#92385 = CIRCLE('',#92386,0.125); +#92386 = AXIS2_PLACEMENT_3D('',#92387,#92388,#92389); +#92387 = CARTESIAN_POINT('',(-1.725,5.273559366969E-16,0.)); +#92388 = DIRECTION('',(0.,0.,1.)); +#92389 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92390 = CYLINDRICAL_SURFACE('',#92391,0.125); +#92391 = AXIS2_PLACEMENT_3D('',#92392,#92393,#92394); +#92392 = CARTESIAN_POINT('',(-1.725,5.273559366969E-16,0.)); +#92393 = DIRECTION('',(0.,0.,-1.)); +#92394 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92395 = ADVANCED_FACE('',(#92396),#92423,.F.); +#92396 = FACE_BOUND('',#92397,.F.); +#92397 = EDGE_LOOP('',(#92398,#92406,#92407,#92408,#92409,#92417)); +#92398 = ORIENTED_EDGE('',*,*,#92399,.F.); +#92399 = EDGE_CURVE('',#92350,#92400,#92402,.T.); +#92400 = VERTEX_POINT('',#92401); +#92401 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#92402 = LINE('',#92403,#92404); +#92403 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92404 = VECTOR('',#92405,1.); +#92405 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92406 = ORIENTED_EDGE('',*,*,#92349,.T.); +#92407 = ORIENTED_EDGE('',*,*,#91300,.F.); +#92408 = ORIENTED_EDGE('',*,*,#91538,.F.); +#92409 = ORIENTED_EDGE('',*,*,#92410,.T.); +#92410 = EDGE_CURVE('',#91531,#92411,#92413,.T.); +#92411 = VERTEX_POINT('',#92412); +#92412 = CARTESIAN_POINT('',(0.625,2.5,0.2)); +#92413 = LINE('',#92414,#92415); +#92414 = CARTESIAN_POINT('',(0.625,2.225,0.2)); +#92415 = VECTOR('',#92416,1.); +#92416 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92417 = ORIENTED_EDGE('',*,*,#92418,.F.); +#92418 = EDGE_CURVE('',#92400,#92411,#92419,.T.); +#92419 = LINE('',#92420,#92421); +#92420 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#92421 = VECTOR('',#92422,1.); +#92422 = DIRECTION('',(0.,0.,1.)); +#92423 = PLANE('',#92424); +#92424 = AXIS2_PLACEMENT_3D('',#92425,#92426,#92427); +#92425 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92426 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92427 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92428 = ADVANCED_FACE('',(#92429),#92456,.F.); +#92429 = FACE_BOUND('',#92430,.F.); +#92430 = EDGE_LOOP('',(#92431,#92439,#92447,#92453,#92454,#92455)); +#92431 = ORIENTED_EDGE('',*,*,#92432,.F.); +#92432 = EDGE_CURVE('',#92433,#92377,#92435,.T.); +#92433 = VERTEX_POINT('',#92434); +#92434 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92435 = LINE('',#92436,#92437); +#92436 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92437 = VECTOR('',#92438,1.); +#92438 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92439 = ORIENTED_EDGE('',*,*,#92440,.T.); +#92440 = EDGE_CURVE('',#92433,#92441,#92443,.T.); +#92441 = VERTEX_POINT('',#92442); +#92442 = CARTESIAN_POINT('',(-2.,-0.125,0.2)); +#92443 = LINE('',#92444,#92445); +#92444 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92445 = VECTOR('',#92446,1.); +#92446 = DIRECTION('',(0.,0.,1.)); +#92447 = ORIENTED_EDGE('',*,*,#92448,.T.); +#92448 = EDGE_CURVE('',#92441,#91681,#92449,.T.); +#92449 = LINE('',#92450,#92451); +#92450 = CARTESIAN_POINT('',(-2.,-0.125,0.2)); +#92451 = VECTOR('',#92452,1.); +#92452 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92453 = ORIENTED_EDGE('',*,*,#91680,.F.); +#92454 = ORIENTED_EDGE('',*,*,#90732,.F.); +#92455 = ORIENTED_EDGE('',*,*,#92376,.F.); +#92456 = PLANE('',#92457); +#92457 = AXIS2_PLACEMENT_3D('',#92458,#92459,#92460); +#92458 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92459 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92460 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92461 = ADVANCED_FACE('',(#92462),#92496,.F.); +#92462 = FACE_BOUND('',#92463,.F.); +#92463 = EDGE_LOOP('',(#92464,#92474,#92482,#92488,#92489,#92490)); +#92464 = ORIENTED_EDGE('',*,*,#92465,.F.); +#92465 = EDGE_CURVE('',#92466,#92468,#92470,.T.); +#92466 = VERTEX_POINT('',#92467); +#92467 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92468 = VERTEX_POINT('',#92469); +#92469 = CARTESIAN_POINT('',(0.875,2.225,0.)); +#92470 = LINE('',#92471,#92472); +#92471 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92472 = VECTOR('',#92473,1.); +#92473 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92474 = ORIENTED_EDGE('',*,*,#92475,.T.); +#92475 = EDGE_CURVE('',#92466,#92476,#92478,.T.); +#92476 = VERTEX_POINT('',#92477); +#92477 = CARTESIAN_POINT('',(0.875,2.5,0.2)); +#92478 = LINE('',#92479,#92480); +#92479 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92480 = VECTOR('',#92481,1.); +#92481 = DIRECTION('',(0.,0.,1.)); +#92482 = ORIENTED_EDGE('',*,*,#92483,.T.); +#92483 = EDGE_CURVE('',#92476,#91546,#92484,.T.); +#92484 = LINE('',#92485,#92486); +#92485 = CARTESIAN_POINT('',(0.875,2.5,0.2)); +#92486 = VECTOR('',#92487,1.); +#92487 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92488 = ORIENTED_EDGE('',*,*,#91545,.F.); +#92489 = ORIENTED_EDGE('',*,*,#91284,.F.); +#92490 = ORIENTED_EDGE('',*,*,#92491,.F.); +#92491 = EDGE_CURVE('',#92468,#91276,#92492,.T.); +#92492 = LINE('',#92493,#92494); +#92493 = CARTESIAN_POINT('',(0.875,2.225,0.)); +#92494 = VECTOR('',#92495,1.); +#92495 = DIRECTION('',(0.,0.,1.)); +#92496 = PLANE('',#92497); +#92497 = AXIS2_PLACEMENT_3D('',#92498,#92499,#92500); +#92498 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92499 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#92500 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92501 = ADVANCED_FACE('',(#92502),#92536,.F.); +#92502 = FACE_BOUND('',#92503,.F.); +#92503 = EDGE_LOOP('',(#92504,#92514,#92520,#92521,#92522,#92530)); +#92504 = ORIENTED_EDGE('',*,*,#92505,.F.); +#92505 = EDGE_CURVE('',#92506,#92508,#92510,.T.); +#92506 = VERTEX_POINT('',#92507); +#92507 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92508 = VERTEX_POINT('',#92509); +#92509 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#92510 = LINE('',#92511,#92512); +#92511 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92512 = VECTOR('',#92513,1.); +#92513 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92514 = ORIENTED_EDGE('',*,*,#92515,.T.); +#92515 = EDGE_CURVE('',#92506,#90749,#92516,.T.); +#92516 = LINE('',#92517,#92518); +#92517 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92518 = VECTOR('',#92519,1.); +#92519 = DIRECTION('',(0.,0.,1.)); +#92520 = ORIENTED_EDGE('',*,*,#90748,.F.); +#92521 = ORIENTED_EDGE('',*,*,#91673,.F.); +#92522 = ORIENTED_EDGE('',*,*,#92523,.T.); +#92523 = EDGE_CURVE('',#91666,#92524,#92526,.T.); +#92524 = VERTEX_POINT('',#92525); +#92525 = CARTESIAN_POINT('',(-2.,-0.375,0.2)); +#92526 = LINE('',#92527,#92528); +#92527 = CARTESIAN_POINT('',(-1.725,-0.375,0.2)); +#92528 = VECTOR('',#92529,1.); +#92529 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92530 = ORIENTED_EDGE('',*,*,#92531,.F.); +#92531 = EDGE_CURVE('',#92508,#92524,#92532,.T.); +#92532 = LINE('',#92533,#92534); +#92533 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#92534 = VECTOR('',#92535,1.); +#92535 = DIRECTION('',(0.,0.,1.)); +#92536 = PLANE('',#92537); +#92537 = AXIS2_PLACEMENT_3D('',#92538,#92539,#92540); +#92538 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92539 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92540 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92541 = ADVANCED_FACE('',(#92542),#92561,.T.); +#92542 = FACE_BOUND('',#92543,.T.); +#92543 = EDGE_LOOP('',(#92544,#92552,#92553,#92554)); +#92544 = ORIENTED_EDGE('',*,*,#92545,.T.); +#92545 = EDGE_CURVE('',#92546,#91268,#92548,.T.); +#92546 = VERTEX_POINT('',#92547); +#92547 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92548 = LINE('',#92549,#92550); +#92549 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92550 = VECTOR('',#92551,1.); +#92551 = DIRECTION('',(0.,0.,1.)); +#92552 = ORIENTED_EDGE('',*,*,#91275,.T.); +#92553 = ORIENTED_EDGE('',*,*,#92491,.F.); +#92554 = ORIENTED_EDGE('',*,*,#92555,.T.); +#92555 = EDGE_CURVE('',#92468,#92546,#92556,.T.); +#92556 = CIRCLE('',#92557,0.125); +#92557 = AXIS2_PLACEMENT_3D('',#92558,#92559,#92560); +#92558 = CARTESIAN_POINT('',(1.,2.225,0.)); +#92559 = DIRECTION('',(0.,0.,1.)); +#92560 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92561 = CYLINDRICAL_SURFACE('',#92562,0.125); +#92562 = AXIS2_PLACEMENT_3D('',#92563,#92564,#92565); +#92563 = CARTESIAN_POINT('',(1.,2.225,0.)); +#92564 = DIRECTION('',(0.,0.,-1.)); +#92565 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92566 = ADVANCED_FACE('',(#92567),#92586,.T.); +#92567 = FACE_BOUND('',#92568,.T.); +#92568 = EDGE_LOOP('',(#92569,#92570,#92571,#92579)); +#92569 = ORIENTED_EDGE('',*,*,#92515,.T.); +#92570 = ORIENTED_EDGE('',*,*,#90756,.T.); +#92571 = ORIENTED_EDGE('',*,*,#92572,.F.); +#92572 = EDGE_CURVE('',#92573,#90757,#92575,.T.); +#92573 = VERTEX_POINT('',#92574); +#92574 = CARTESIAN_POINT('',(-1.725,-0.625,0.)); +#92575 = LINE('',#92576,#92577); +#92576 = CARTESIAN_POINT('',(-1.725,-0.625,0.)); +#92577 = VECTOR('',#92578,1.); +#92578 = DIRECTION('',(0.,0.,1.)); +#92579 = ORIENTED_EDGE('',*,*,#92580,.T.); +#92580 = EDGE_CURVE('',#92573,#92506,#92581,.T.); +#92581 = CIRCLE('',#92582,0.125); +#92582 = AXIS2_PLACEMENT_3D('',#92583,#92584,#92585); +#92583 = CARTESIAN_POINT('',(-1.725,-0.5,0.)); +#92584 = DIRECTION('',(0.,0.,1.)); +#92585 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92586 = CYLINDRICAL_SURFACE('',#92587,0.125); +#92587 = AXIS2_PLACEMENT_3D('',#92588,#92589,#92590); +#92588 = CARTESIAN_POINT('',(-1.725,-0.5,0.)); +#92589 = DIRECTION('',(0.,0.,-1.)); +#92590 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92591 = ADVANCED_FACE('',(#92592),#92619,.F.); +#92592 = FACE_BOUND('',#92593,.F.); +#92593 = EDGE_LOOP('',(#92594,#92602,#92603,#92604,#92605,#92613)); +#92594 = ORIENTED_EDGE('',*,*,#92595,.F.); +#92595 = EDGE_CURVE('',#92546,#92596,#92598,.T.); +#92596 = VERTEX_POINT('',#92597); +#92597 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#92598 = LINE('',#92599,#92600); +#92599 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92600 = VECTOR('',#92601,1.); +#92601 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92602 = ORIENTED_EDGE('',*,*,#92545,.T.); +#92603 = ORIENTED_EDGE('',*,*,#91267,.F.); +#92604 = ORIENTED_EDGE('',*,*,#91561,.F.); +#92605 = ORIENTED_EDGE('',*,*,#92606,.T.); +#92606 = EDGE_CURVE('',#91554,#92607,#92609,.T.); +#92607 = VERTEX_POINT('',#92608); +#92608 = CARTESIAN_POINT('',(1.125,2.5,0.2)); +#92609 = LINE('',#92610,#92611); +#92610 = CARTESIAN_POINT('',(1.125,2.225,0.2)); +#92611 = VECTOR('',#92612,1.); +#92612 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92613 = ORIENTED_EDGE('',*,*,#92614,.F.); +#92614 = EDGE_CURVE('',#92596,#92607,#92615,.T.); +#92615 = LINE('',#92616,#92617); +#92616 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#92617 = VECTOR('',#92618,1.); +#92618 = DIRECTION('',(0.,0.,1.)); +#92619 = PLANE('',#92620); +#92620 = AXIS2_PLACEMENT_3D('',#92621,#92622,#92623); +#92621 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92622 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92623 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92624 = ADVANCED_FACE('',(#92625),#92652,.F.); +#92625 = FACE_BOUND('',#92626,.F.); +#92626 = EDGE_LOOP('',(#92627,#92635,#92643,#92649,#92650,#92651)); +#92627 = ORIENTED_EDGE('',*,*,#92628,.F.); +#92628 = EDGE_CURVE('',#92629,#92573,#92631,.T.); +#92629 = VERTEX_POINT('',#92630); +#92630 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92631 = LINE('',#92632,#92633); +#92632 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92633 = VECTOR('',#92634,1.); +#92634 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92635 = ORIENTED_EDGE('',*,*,#92636,.T.); +#92636 = EDGE_CURVE('',#92629,#92637,#92639,.T.); +#92637 = VERTEX_POINT('',#92638); +#92638 = CARTESIAN_POINT('',(-2.,-0.625,0.2)); +#92639 = LINE('',#92640,#92641); +#92640 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92641 = VECTOR('',#92642,1.); +#92642 = DIRECTION('',(0.,0.,1.)); +#92643 = ORIENTED_EDGE('',*,*,#92644,.T.); +#92644 = EDGE_CURVE('',#92637,#91658,#92645,.T.); +#92645 = LINE('',#92646,#92647); +#92646 = CARTESIAN_POINT('',(-2.,-0.625,0.2)); +#92647 = VECTOR('',#92648,1.); +#92648 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92649 = ORIENTED_EDGE('',*,*,#91657,.F.); +#92650 = ORIENTED_EDGE('',*,*,#90765,.F.); +#92651 = ORIENTED_EDGE('',*,*,#92572,.F.); +#92652 = PLANE('',#92653); +#92653 = AXIS2_PLACEMENT_3D('',#92654,#92655,#92656); +#92654 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92655 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92656 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92657 = ADVANCED_FACE('',(#92658),#92837,.T.); +#92658 = FACE_BOUND('',#92659,.T.); +#92659 = EDGE_LOOP('',(#92660,#92661,#92662,#92670,#92676,#92677,#92685, + #92693,#92699,#92700,#92708,#92716,#92722,#92723,#92731,#92739, + #92745,#92746,#92754,#92762,#92768,#92769,#92777,#92785,#92791, + #92792,#92800,#92808,#92814,#92815,#92823,#92831)); +#92660 = ORIENTED_EDGE('',*,*,#91251,.F.); +#92661 = ORIENTED_EDGE('',*,*,#91568,.T.); +#92662 = ORIENTED_EDGE('',*,*,#92663,.T.); +#92663 = EDGE_CURVE('',#91453,#92664,#92666,.T.); +#92664 = VERTEX_POINT('',#92665); +#92665 = CARTESIAN_POINT('',(1.99,-2.49,0.77)); +#92666 = LINE('',#92667,#92668); +#92667 = CARTESIAN_POINT('',(1.99,2.49,0.77)); +#92668 = VECTOR('',#92669,1.); +#92669 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#92670 = ORIENTED_EDGE('',*,*,#92671,.F.); +#92671 = EDGE_CURVE('',#91013,#92664,#92672,.T.); +#92672 = LINE('',#92673,#92674); +#92673 = CARTESIAN_POINT('',(1.99,-2.49,2.E-02)); +#92674 = VECTOR('',#92675,1.); +#92675 = DIRECTION('',(0.,0.,1.)); +#92676 = ORIENTED_EDGE('',*,*,#91020,.F.); +#92677 = ORIENTED_EDGE('',*,*,#92678,.T.); +#92678 = EDGE_CURVE('',#91021,#92679,#92681,.T.); +#92679 = VERTEX_POINT('',#92680); +#92680 = CARTESIAN_POINT('',(1.99,-1.625,0.2)); +#92681 = LINE('',#92682,#92683); +#92682 = CARTESIAN_POINT('',(1.99,-1.625,1.E-02)); +#92683 = VECTOR('',#92684,1.); +#92684 = DIRECTION('',(0.,0.,1.)); +#92685 = ORIENTED_EDGE('',*,*,#92686,.T.); +#92686 = EDGE_CURVE('',#92679,#92687,#92689,.T.); +#92687 = VERTEX_POINT('',#92688); +#92688 = CARTESIAN_POINT('',(1.99,-1.375,0.2)); +#92689 = LINE('',#92690,#92691); +#92690 = CARTESIAN_POINT('',(1.99,0.5575,0.2)); +#92691 = VECTOR('',#92692,1.); +#92692 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92693 = ORIENTED_EDGE('',*,*,#92694,.T.); +#92694 = EDGE_CURVE('',#92687,#91046,#92695,.T.); +#92695 = LINE('',#92696,#92697); +#92696 = CARTESIAN_POINT('',(1.99,-1.375,1.E-02)); +#92697 = VECTOR('',#92698,1.); +#92698 = DIRECTION('',(0.,-0.,-1.)); +#92699 = ORIENTED_EDGE('',*,*,#91053,.F.); +#92700 = ORIENTED_EDGE('',*,*,#92701,.T.); +#92701 = EDGE_CURVE('',#91054,#92702,#92704,.T.); +#92702 = VERTEX_POINT('',#92703); +#92703 = CARTESIAN_POINT('',(1.99,-1.125,0.2)); +#92704 = LINE('',#92705,#92706); +#92705 = CARTESIAN_POINT('',(1.99,-1.125,1.E-02)); +#92706 = VECTOR('',#92707,1.); +#92707 = DIRECTION('',(0.,0.,1.)); +#92708 = ORIENTED_EDGE('',*,*,#92709,.T.); +#92709 = EDGE_CURVE('',#92702,#92710,#92712,.T.); +#92710 = VERTEX_POINT('',#92711); +#92711 = CARTESIAN_POINT('',(1.99,-0.875,0.2)); +#92712 = LINE('',#92713,#92714); +#92713 = CARTESIAN_POINT('',(1.99,0.8075,0.2)); +#92714 = VECTOR('',#92715,1.); +#92715 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92716 = ORIENTED_EDGE('',*,*,#92717,.T.); +#92717 = EDGE_CURVE('',#92710,#91079,#92718,.T.); +#92718 = LINE('',#92719,#92720); +#92719 = CARTESIAN_POINT('',(1.99,-0.875,1.E-02)); +#92720 = VECTOR('',#92721,1.); +#92721 = DIRECTION('',(0.,-0.,-1.)); +#92722 = ORIENTED_EDGE('',*,*,#91086,.F.); +#92723 = ORIENTED_EDGE('',*,*,#92724,.T.); +#92724 = EDGE_CURVE('',#91087,#92725,#92727,.T.); +#92725 = VERTEX_POINT('',#92726); +#92726 = CARTESIAN_POINT('',(1.99,-0.625,0.2)); +#92727 = LINE('',#92728,#92729); +#92728 = CARTESIAN_POINT('',(1.99,-0.625,1.E-02)); +#92729 = VECTOR('',#92730,1.); +#92730 = DIRECTION('',(0.,0.,1.)); +#92731 = ORIENTED_EDGE('',*,*,#92732,.T.); +#92732 = EDGE_CURVE('',#92725,#92733,#92735,.T.); +#92733 = VERTEX_POINT('',#92734); +#92734 = CARTESIAN_POINT('',(1.99,-0.375,0.2)); +#92735 = LINE('',#92736,#92737); +#92736 = CARTESIAN_POINT('',(1.99,1.0575,0.2)); +#92737 = VECTOR('',#92738,1.); +#92738 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92739 = ORIENTED_EDGE('',*,*,#92740,.T.); +#92740 = EDGE_CURVE('',#92733,#91112,#92741,.T.); +#92741 = LINE('',#92742,#92743); +#92742 = CARTESIAN_POINT('',(1.99,-0.375,1.E-02)); +#92743 = VECTOR('',#92744,1.); +#92744 = DIRECTION('',(0.,-0.,-1.)); +#92745 = ORIENTED_EDGE('',*,*,#91119,.F.); +#92746 = ORIENTED_EDGE('',*,*,#92747,.T.); +#92747 = EDGE_CURVE('',#91120,#92748,#92750,.T.); +#92748 = VERTEX_POINT('',#92749); +#92749 = CARTESIAN_POINT('',(1.99,-0.125,0.2)); +#92750 = LINE('',#92751,#92752); +#92751 = CARTESIAN_POINT('',(1.99,-0.125,1.E-02)); +#92752 = VECTOR('',#92753,1.); +#92753 = DIRECTION('',(0.,0.,1.)); +#92754 = ORIENTED_EDGE('',*,*,#92755,.T.); +#92755 = EDGE_CURVE('',#92748,#92756,#92758,.T.); +#92756 = VERTEX_POINT('',#92757); +#92757 = CARTESIAN_POINT('',(1.99,0.125,0.2)); +#92758 = LINE('',#92759,#92760); +#92759 = CARTESIAN_POINT('',(1.99,1.3075,0.2)); +#92760 = VECTOR('',#92761,1.); +#92761 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92762 = ORIENTED_EDGE('',*,*,#92763,.T.); +#92763 = EDGE_CURVE('',#92756,#91145,#92764,.T.); +#92764 = LINE('',#92765,#92766); +#92765 = CARTESIAN_POINT('',(1.99,0.125,1.E-02)); +#92766 = VECTOR('',#92767,1.); +#92767 = DIRECTION('',(0.,-0.,-1.)); +#92768 = ORIENTED_EDGE('',*,*,#91152,.F.); +#92769 = ORIENTED_EDGE('',*,*,#92770,.T.); +#92770 = EDGE_CURVE('',#91153,#92771,#92773,.T.); +#92771 = VERTEX_POINT('',#92772); +#92772 = CARTESIAN_POINT('',(1.99,0.375,0.2)); +#92773 = LINE('',#92774,#92775); +#92774 = CARTESIAN_POINT('',(1.99,0.375,1.E-02)); +#92775 = VECTOR('',#92776,1.); +#92776 = DIRECTION('',(0.,0.,1.)); +#92777 = ORIENTED_EDGE('',*,*,#92778,.T.); +#92778 = EDGE_CURVE('',#92771,#92779,#92781,.T.); +#92779 = VERTEX_POINT('',#92780); +#92780 = CARTESIAN_POINT('',(1.99,0.625,0.2)); +#92781 = LINE('',#92782,#92783); +#92782 = CARTESIAN_POINT('',(1.99,1.5575,0.2)); +#92783 = VECTOR('',#92784,1.); +#92784 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92785 = ORIENTED_EDGE('',*,*,#92786,.T.); +#92786 = EDGE_CURVE('',#92779,#91178,#92787,.T.); +#92787 = LINE('',#92788,#92789); +#92788 = CARTESIAN_POINT('',(1.99,0.625,1.E-02)); +#92789 = VECTOR('',#92790,1.); +#92790 = DIRECTION('',(0.,-0.,-1.)); +#92791 = ORIENTED_EDGE('',*,*,#91185,.F.); +#92792 = ORIENTED_EDGE('',*,*,#92793,.T.); +#92793 = EDGE_CURVE('',#91186,#92794,#92796,.T.); +#92794 = VERTEX_POINT('',#92795); +#92795 = CARTESIAN_POINT('',(1.99,0.875,0.2)); +#92796 = LINE('',#92797,#92798); +#92797 = CARTESIAN_POINT('',(1.99,0.875,1.E-02)); +#92798 = VECTOR('',#92799,1.); +#92799 = DIRECTION('',(0.,0.,1.)); +#92800 = ORIENTED_EDGE('',*,*,#92801,.T.); +#92801 = EDGE_CURVE('',#92794,#92802,#92804,.T.); +#92802 = VERTEX_POINT('',#92803); +#92803 = CARTESIAN_POINT('',(1.99,1.125,0.2)); +#92804 = LINE('',#92805,#92806); +#92805 = CARTESIAN_POINT('',(1.99,1.8075,0.2)); +#92806 = VECTOR('',#92807,1.); +#92807 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92808 = ORIENTED_EDGE('',*,*,#92809,.T.); +#92809 = EDGE_CURVE('',#92802,#91211,#92810,.T.); +#92810 = LINE('',#92811,#92812); +#92811 = CARTESIAN_POINT('',(1.99,1.125,1.E-02)); +#92812 = VECTOR('',#92813,1.); +#92813 = DIRECTION('',(0.,-0.,-1.)); +#92814 = ORIENTED_EDGE('',*,*,#91218,.F.); +#92815 = ORIENTED_EDGE('',*,*,#92816,.T.); +#92816 = EDGE_CURVE('',#91219,#92817,#92819,.T.); +#92817 = VERTEX_POINT('',#92818); +#92818 = CARTESIAN_POINT('',(1.99,1.375,0.2)); +#92819 = LINE('',#92820,#92821); +#92820 = CARTESIAN_POINT('',(1.99,1.375,1.E-02)); +#92821 = VECTOR('',#92822,1.); +#92822 = DIRECTION('',(0.,0.,1.)); +#92823 = ORIENTED_EDGE('',*,*,#92824,.T.); +#92824 = EDGE_CURVE('',#92817,#92825,#92827,.T.); +#92825 = VERTEX_POINT('',#92826); +#92826 = CARTESIAN_POINT('',(1.99,1.625,0.2)); +#92827 = LINE('',#92828,#92829); +#92828 = CARTESIAN_POINT('',(1.99,2.0575,0.2)); +#92829 = VECTOR('',#92830,1.); +#92830 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92831 = ORIENTED_EDGE('',*,*,#92832,.T.); +#92832 = EDGE_CURVE('',#92825,#91244,#92833,.T.); +#92833 = LINE('',#92834,#92835); +#92834 = CARTESIAN_POINT('',(1.99,1.625,1.E-02)); +#92835 = VECTOR('',#92836,1.); +#92836 = DIRECTION('',(0.,-0.,-1.)); +#92837 = PLANE('',#92838); +#92838 = AXIS2_PLACEMENT_3D('',#92839,#92840,#92841); +#92839 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#92840 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#92841 = DIRECTION('',(0.,0.,1.)); +#92842 = ADVANCED_FACE('',(#92843),#92877,.F.); +#92843 = FACE_BOUND('',#92844,.F.); +#92844 = EDGE_LOOP('',(#92845,#92855,#92861,#92862,#92863,#92871)); +#92845 = ORIENTED_EDGE('',*,*,#92846,.F.); +#92846 = EDGE_CURVE('',#92847,#92849,#92851,.T.); +#92847 = VERTEX_POINT('',#92848); +#92848 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92849 = VERTEX_POINT('',#92850); +#92850 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#92851 = LINE('',#92852,#92853); +#92852 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92853 = VECTOR('',#92854,1.); +#92854 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92855 = ORIENTED_EDGE('',*,*,#92856,.T.); +#92856 = EDGE_CURVE('',#92847,#90782,#92857,.T.); +#92857 = LINE('',#92858,#92859); +#92858 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92859 = VECTOR('',#92860,1.); +#92860 = DIRECTION('',(0.,0.,1.)); +#92861 = ORIENTED_EDGE('',*,*,#90781,.F.); +#92862 = ORIENTED_EDGE('',*,*,#91650,.F.); +#92863 = ORIENTED_EDGE('',*,*,#92864,.T.); +#92864 = EDGE_CURVE('',#91643,#92865,#92867,.T.); +#92865 = VERTEX_POINT('',#92866); +#92866 = CARTESIAN_POINT('',(-2.,-0.875,0.2)); +#92867 = LINE('',#92868,#92869); +#92868 = CARTESIAN_POINT('',(-1.725,-0.875,0.2)); +#92869 = VECTOR('',#92870,1.); +#92870 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92871 = ORIENTED_EDGE('',*,*,#92872,.F.); +#92872 = EDGE_CURVE('',#92849,#92865,#92873,.T.); +#92873 = LINE('',#92874,#92875); +#92874 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#92875 = VECTOR('',#92876,1.); +#92876 = DIRECTION('',(0.,0.,1.)); +#92877 = PLANE('',#92878); +#92878 = AXIS2_PLACEMENT_3D('',#92879,#92880,#92881); +#92879 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92880 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92881 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92882 = ADVANCED_FACE('',(#92883),#92917,.F.); +#92883 = FACE_BOUND('',#92884,.F.); +#92884 = EDGE_LOOP('',(#92885,#92895,#92903,#92909,#92910,#92911)); +#92885 = ORIENTED_EDGE('',*,*,#92886,.F.); +#92886 = EDGE_CURVE('',#92887,#92889,#92891,.T.); +#92887 = VERTEX_POINT('',#92888); +#92888 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92889 = VERTEX_POINT('',#92890); +#92890 = CARTESIAN_POINT('',(1.725,1.625,0.)); +#92891 = LINE('',#92892,#92893); +#92892 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92893 = VECTOR('',#92894,1.); +#92894 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#92895 = ORIENTED_EDGE('',*,*,#92896,.T.); +#92896 = EDGE_CURVE('',#92887,#92897,#92899,.T.); +#92897 = VERTEX_POINT('',#92898); +#92898 = CARTESIAN_POINT('',(2.,1.625,0.2)); +#92899 = LINE('',#92900,#92901); +#92900 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92901 = VECTOR('',#92902,1.); +#92902 = DIRECTION('',(0.,0.,1.)); +#92903 = ORIENTED_EDGE('',*,*,#92904,.T.); +#92904 = EDGE_CURVE('',#92897,#92825,#92905,.T.); +#92905 = LINE('',#92906,#92907); +#92906 = CARTESIAN_POINT('',(2.,1.625,0.2)); +#92907 = VECTOR('',#92908,1.); +#92908 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#92909 = ORIENTED_EDGE('',*,*,#92832,.T.); +#92910 = ORIENTED_EDGE('',*,*,#91243,.F.); +#92911 = ORIENTED_EDGE('',*,*,#92912,.F.); +#92912 = EDGE_CURVE('',#92889,#91235,#92913,.T.); +#92913 = LINE('',#92914,#92915); +#92914 = CARTESIAN_POINT('',(1.725,1.625,0.)); +#92915 = VECTOR('',#92916,1.); +#92916 = DIRECTION('',(0.,0.,1.)); +#92917 = PLANE('',#92918); +#92918 = AXIS2_PLACEMENT_3D('',#92919,#92920,#92921); +#92919 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92920 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#92921 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#92922 = ADVANCED_FACE('',(#92923),#92942,.T.); +#92923 = FACE_BOUND('',#92924,.T.); +#92924 = EDGE_LOOP('',(#92925,#92926,#92927,#92935)); +#92925 = ORIENTED_EDGE('',*,*,#92856,.T.); +#92926 = ORIENTED_EDGE('',*,*,#90789,.T.); +#92927 = ORIENTED_EDGE('',*,*,#92928,.F.); +#92928 = EDGE_CURVE('',#92929,#90790,#92931,.T.); +#92929 = VERTEX_POINT('',#92930); +#92930 = CARTESIAN_POINT('',(-1.725,-1.125,0.)); +#92931 = LINE('',#92932,#92933); +#92932 = CARTESIAN_POINT('',(-1.725,-1.125,0.)); +#92933 = VECTOR('',#92934,1.); +#92934 = DIRECTION('',(0.,0.,1.)); +#92935 = ORIENTED_EDGE('',*,*,#92936,.T.); +#92936 = EDGE_CURVE('',#92929,#92847,#92937,.T.); +#92937 = CIRCLE('',#92938,0.125); +#92938 = AXIS2_PLACEMENT_3D('',#92939,#92940,#92941); +#92939 = CARTESIAN_POINT('',(-1.725,-1.,0.)); +#92940 = DIRECTION('',(0.,0.,1.)); +#92941 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92942 = CYLINDRICAL_SURFACE('',#92943,0.125); +#92943 = AXIS2_PLACEMENT_3D('',#92944,#92945,#92946); +#92944 = CARTESIAN_POINT('',(-1.725,-1.,0.)); +#92945 = DIRECTION('',(0.,0.,-1.)); +#92946 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92947 = ADVANCED_FACE('',(#92948),#92967,.T.); +#92948 = FACE_BOUND('',#92949,.T.); +#92949 = EDGE_LOOP('',(#92950,#92958,#92959,#92960)); +#92950 = ORIENTED_EDGE('',*,*,#92951,.T.); +#92951 = EDGE_CURVE('',#92952,#91227,#92954,.T.); +#92952 = VERTEX_POINT('',#92953); +#92953 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#92954 = LINE('',#92955,#92956); +#92955 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#92956 = VECTOR('',#92957,1.); +#92957 = DIRECTION('',(0.,0.,1.)); +#92958 = ORIENTED_EDGE('',*,*,#91234,.T.); +#92959 = ORIENTED_EDGE('',*,*,#92912,.F.); +#92960 = ORIENTED_EDGE('',*,*,#92961,.T.); +#92961 = EDGE_CURVE('',#92889,#92952,#92962,.T.); +#92962 = CIRCLE('',#92963,0.125); +#92963 = AXIS2_PLACEMENT_3D('',#92964,#92965,#92966); +#92964 = CARTESIAN_POINT('',(1.725,1.5,0.)); +#92965 = DIRECTION('',(0.,-0.,1.)); +#92966 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#92967 = CYLINDRICAL_SURFACE('',#92968,0.125); +#92968 = AXIS2_PLACEMENT_3D('',#92969,#92970,#92971); +#92969 = CARTESIAN_POINT('',(1.725,1.5,0.)); +#92970 = DIRECTION('',(0.,-0.,-1.)); +#92971 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#92972 = ADVANCED_FACE('',(#92973),#93000,.F.); +#92973 = FACE_BOUND('',#92974,.F.); +#92974 = EDGE_LOOP('',(#92975,#92983,#92991,#92997,#92998,#92999)); +#92975 = ORIENTED_EDGE('',*,*,#92976,.F.); +#92976 = EDGE_CURVE('',#92977,#92929,#92979,.T.); +#92977 = VERTEX_POINT('',#92978); +#92978 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#92979 = LINE('',#92980,#92981); +#92980 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#92981 = VECTOR('',#92982,1.); +#92982 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92983 = ORIENTED_EDGE('',*,*,#92984,.T.); +#92984 = EDGE_CURVE('',#92977,#92985,#92987,.T.); +#92985 = VERTEX_POINT('',#92986); +#92986 = CARTESIAN_POINT('',(-2.,-1.125,0.2)); +#92987 = LINE('',#92988,#92989); +#92988 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#92989 = VECTOR('',#92990,1.); +#92990 = DIRECTION('',(0.,0.,1.)); +#92991 = ORIENTED_EDGE('',*,*,#92992,.T.); +#92992 = EDGE_CURVE('',#92985,#91635,#92993,.T.); +#92993 = LINE('',#92994,#92995); +#92994 = CARTESIAN_POINT('',(-2.,-1.125,0.2)); +#92995 = VECTOR('',#92996,1.); +#92996 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92997 = ORIENTED_EDGE('',*,*,#91634,.F.); +#92998 = ORIENTED_EDGE('',*,*,#90798,.F.); +#92999 = ORIENTED_EDGE('',*,*,#92928,.F.); +#93000 = PLANE('',#93001); +#93001 = AXIS2_PLACEMENT_3D('',#93002,#93003,#93004); +#93002 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#93003 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#93004 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93005 = ADVANCED_FACE('',(#93006),#93033,.F.); +#93006 = FACE_BOUND('',#93007,.F.); +#93007 = EDGE_LOOP('',(#93008,#93016,#93017,#93018,#93019,#93027)); +#93008 = ORIENTED_EDGE('',*,*,#93009,.F.); +#93009 = EDGE_CURVE('',#92952,#93010,#93012,.T.); +#93010 = VERTEX_POINT('',#93011); +#93011 = CARTESIAN_POINT('',(2.,1.375,0.)); +#93012 = LINE('',#93013,#93014); +#93013 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#93014 = VECTOR('',#93015,1.); +#93015 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93016 = ORIENTED_EDGE('',*,*,#92951,.T.); +#93017 = ORIENTED_EDGE('',*,*,#91226,.F.); +#93018 = ORIENTED_EDGE('',*,*,#92816,.T.); +#93019 = ORIENTED_EDGE('',*,*,#93020,.T.); +#93020 = EDGE_CURVE('',#92817,#93021,#93023,.T.); +#93021 = VERTEX_POINT('',#93022); +#93022 = CARTESIAN_POINT('',(2.,1.375,0.2)); +#93023 = LINE('',#93024,#93025); +#93024 = CARTESIAN_POINT('',(1.725,1.375,0.2)); +#93025 = VECTOR('',#93026,1.); +#93026 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93027 = ORIENTED_EDGE('',*,*,#93028,.F.); +#93028 = EDGE_CURVE('',#93010,#93021,#93029,.T.); +#93029 = LINE('',#93030,#93031); +#93030 = CARTESIAN_POINT('',(2.,1.375,0.)); +#93031 = VECTOR('',#93032,1.); +#93032 = DIRECTION('',(0.,0.,1.)); +#93033 = PLANE('',#93034); +#93034 = AXIS2_PLACEMENT_3D('',#93035,#93036,#93037); +#93035 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#93036 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93037 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93038 = ADVANCED_FACE('',(#93039),#93073,.F.); +#93039 = FACE_BOUND('',#93040,.F.); +#93040 = EDGE_LOOP('',(#93041,#93051,#93057,#93058,#93059,#93067)); +#93041 = ORIENTED_EDGE('',*,*,#93042,.F.); +#93042 = EDGE_CURVE('',#93043,#93045,#93047,.T.); +#93043 = VERTEX_POINT('',#93044); +#93044 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93045 = VERTEX_POINT('',#93046); +#93046 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#93047 = LINE('',#93048,#93049); +#93048 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93049 = VECTOR('',#93050,1.); +#93050 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#93051 = ORIENTED_EDGE('',*,*,#93052,.T.); +#93052 = EDGE_CURVE('',#93043,#90815,#93053,.T.); +#93053 = LINE('',#93054,#93055); +#93054 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93055 = VECTOR('',#93056,1.); +#93056 = DIRECTION('',(0.,0.,1.)); +#93057 = ORIENTED_EDGE('',*,*,#90814,.F.); +#93058 = ORIENTED_EDGE('',*,*,#91627,.F.); +#93059 = ORIENTED_EDGE('',*,*,#93060,.T.); +#93060 = EDGE_CURVE('',#91620,#93061,#93063,.T.); +#93061 = VERTEX_POINT('',#93062); +#93062 = CARTESIAN_POINT('',(-2.,-1.375,0.2)); +#93063 = LINE('',#93064,#93065); +#93064 = CARTESIAN_POINT('',(-1.725,-1.375,0.2)); +#93065 = VECTOR('',#93066,1.); +#93066 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#93067 = ORIENTED_EDGE('',*,*,#93068,.F.); +#93068 = EDGE_CURVE('',#93045,#93061,#93069,.T.); +#93069 = LINE('',#93070,#93071); +#93070 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#93071 = VECTOR('',#93072,1.); +#93072 = DIRECTION('',(0.,0.,1.)); +#93073 = PLANE('',#93074); +#93074 = AXIS2_PLACEMENT_3D('',#93075,#93076,#93077); +#93075 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93076 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#93077 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#93078 = ADVANCED_FACE('',(#93079),#93113,.F.); +#93079 = FACE_BOUND('',#93080,.F.); +#93080 = EDGE_LOOP('',(#93081,#93091,#93099,#93105,#93106,#93107)); +#93081 = ORIENTED_EDGE('',*,*,#93082,.F.); +#93082 = EDGE_CURVE('',#93083,#93085,#93087,.T.); +#93083 = VERTEX_POINT('',#93084); +#93084 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93085 = VERTEX_POINT('',#93086); +#93086 = CARTESIAN_POINT('',(1.725,1.125,0.)); +#93087 = LINE('',#93088,#93089); +#93088 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93089 = VECTOR('',#93090,1.); +#93090 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93091 = ORIENTED_EDGE('',*,*,#93092,.T.); +#93092 = EDGE_CURVE('',#93083,#93093,#93095,.T.); +#93093 = VERTEX_POINT('',#93094); +#93094 = CARTESIAN_POINT('',(2.,1.125,0.2)); +#93095 = LINE('',#93096,#93097); +#93096 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93097 = VECTOR('',#93098,1.); +#93098 = DIRECTION('',(0.,0.,1.)); +#93099 = ORIENTED_EDGE('',*,*,#93100,.T.); +#93100 = EDGE_CURVE('',#93093,#92802,#93101,.T.); +#93101 = LINE('',#93102,#93103); +#93102 = CARTESIAN_POINT('',(2.,1.125,0.2)); +#93103 = VECTOR('',#93104,1.); +#93104 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93105 = ORIENTED_EDGE('',*,*,#92809,.T.); +#93106 = ORIENTED_EDGE('',*,*,#91210,.F.); +#93107 = ORIENTED_EDGE('',*,*,#93108,.F.); +#93108 = EDGE_CURVE('',#93085,#91202,#93109,.T.); +#93109 = LINE('',#93110,#93111); +#93110 = CARTESIAN_POINT('',(1.725,1.125,0.)); +#93111 = VECTOR('',#93112,1.); +#93112 = DIRECTION('',(0.,0.,1.)); +#93113 = PLANE('',#93114); +#93114 = AXIS2_PLACEMENT_3D('',#93115,#93116,#93117); +#93115 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93116 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93117 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93118 = ADVANCED_FACE('',(#93119),#93138,.T.); +#93119 = FACE_BOUND('',#93120,.T.); +#93120 = EDGE_LOOP('',(#93121,#93122,#93123,#93131)); +#93121 = ORIENTED_EDGE('',*,*,#93052,.T.); +#93122 = ORIENTED_EDGE('',*,*,#90822,.T.); +#93123 = ORIENTED_EDGE('',*,*,#93124,.F.); +#93124 = EDGE_CURVE('',#93125,#90823,#93127,.T.); +#93125 = VERTEX_POINT('',#93126); +#93126 = CARTESIAN_POINT('',(-1.725,-1.625,0.)); +#93127 = LINE('',#93128,#93129); +#93128 = CARTESIAN_POINT('',(-1.725,-1.625,0.)); +#93129 = VECTOR('',#93130,1.); +#93130 = DIRECTION('',(0.,0.,1.)); +#93131 = ORIENTED_EDGE('',*,*,#93132,.T.); +#93132 = EDGE_CURVE('',#93125,#93043,#93133,.T.); +#93133 = CIRCLE('',#93134,0.125); +#93134 = AXIS2_PLACEMENT_3D('',#93135,#93136,#93137); +#93135 = CARTESIAN_POINT('',(-1.725,-1.5,0.)); +#93136 = DIRECTION('',(0.,0.,1.)); +#93137 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#93138 = CYLINDRICAL_SURFACE('',#93139,0.125); +#93139 = AXIS2_PLACEMENT_3D('',#93140,#93141,#93142); +#93140 = CARTESIAN_POINT('',(-1.725,-1.5,0.)); +#93141 = DIRECTION('',(0.,0.,-1.)); +#93142 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#93143 = ADVANCED_FACE('',(#93144),#93163,.T.); +#93144 = FACE_BOUND('',#93145,.T.); +#93145 = EDGE_LOOP('',(#93146,#93154,#93155,#93156)); +#93146 = ORIENTED_EDGE('',*,*,#93147,.T.); +#93147 = EDGE_CURVE('',#93148,#91194,#93150,.T.); +#93148 = VERTEX_POINT('',#93149); +#93149 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93150 = LINE('',#93151,#93152); +#93151 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93152 = VECTOR('',#93153,1.); +#93153 = DIRECTION('',(0.,0.,1.)); +#93154 = ORIENTED_EDGE('',*,*,#91201,.T.); +#93155 = ORIENTED_EDGE('',*,*,#93108,.F.); +#93156 = ORIENTED_EDGE('',*,*,#93157,.T.); +#93157 = EDGE_CURVE('',#93085,#93148,#93158,.T.); +#93158 = CIRCLE('',#93159,0.125); +#93159 = AXIS2_PLACEMENT_3D('',#93160,#93161,#93162); +#93160 = CARTESIAN_POINT('',(1.725,1.,0.)); +#93161 = DIRECTION('',(0.,-0.,1.)); +#93162 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93163 = CYLINDRICAL_SURFACE('',#93164,0.125); +#93164 = AXIS2_PLACEMENT_3D('',#93165,#93166,#93167); +#93165 = CARTESIAN_POINT('',(1.725,1.,0.)); +#93166 = DIRECTION('',(0.,-0.,-1.)); +#93167 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93168 = ADVANCED_FACE('',(#93169),#93196,.F.); +#93169 = FACE_BOUND('',#93170,.F.); +#93170 = EDGE_LOOP('',(#93171,#93179,#93187,#93193,#93194,#93195)); +#93171 = ORIENTED_EDGE('',*,*,#93172,.F.); +#93172 = EDGE_CURVE('',#93173,#93125,#93175,.T.); +#93173 = VERTEX_POINT('',#93174); +#93174 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93175 = LINE('',#93176,#93177); +#93176 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93177 = VECTOR('',#93178,1.); +#93178 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93179 = ORIENTED_EDGE('',*,*,#93180,.T.); +#93180 = EDGE_CURVE('',#93173,#93181,#93183,.T.); +#93181 = VERTEX_POINT('',#93182); +#93182 = CARTESIAN_POINT('',(-2.,-1.625,0.2)); +#93183 = LINE('',#93184,#93185); +#93184 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93185 = VECTOR('',#93186,1.); +#93186 = DIRECTION('',(0.,0.,1.)); +#93187 = ORIENTED_EDGE('',*,*,#93188,.T.); +#93188 = EDGE_CURVE('',#93181,#91612,#93189,.T.); +#93189 = LINE('',#93190,#93191); +#93190 = CARTESIAN_POINT('',(-2.,-1.625,0.2)); +#93191 = VECTOR('',#93192,1.); +#93192 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93193 = ORIENTED_EDGE('',*,*,#91611,.F.); +#93194 = ORIENTED_EDGE('',*,*,#90831,.F.); +#93195 = ORIENTED_EDGE('',*,*,#93124,.F.); +#93196 = PLANE('',#93197); +#93197 = AXIS2_PLACEMENT_3D('',#93198,#93199,#93200); +#93198 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93199 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#93200 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93201 = ADVANCED_FACE('',(#93202),#93229,.F.); +#93202 = FACE_BOUND('',#93203,.F.); +#93203 = EDGE_LOOP('',(#93204,#93212,#93213,#93214,#93215,#93223)); +#93204 = ORIENTED_EDGE('',*,*,#93205,.F.); +#93205 = EDGE_CURVE('',#93148,#93206,#93208,.T.); +#93206 = VERTEX_POINT('',#93207); +#93207 = CARTESIAN_POINT('',(2.,0.875,0.)); +#93208 = LINE('',#93209,#93210); +#93209 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93210 = VECTOR('',#93211,1.); +#93211 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93212 = ORIENTED_EDGE('',*,*,#93147,.T.); +#93213 = ORIENTED_EDGE('',*,*,#91193,.F.); +#93214 = ORIENTED_EDGE('',*,*,#92793,.T.); +#93215 = ORIENTED_EDGE('',*,*,#93216,.T.); +#93216 = EDGE_CURVE('',#92794,#93217,#93219,.T.); +#93217 = VERTEX_POINT('',#93218); +#93218 = CARTESIAN_POINT('',(2.,0.875,0.2)); +#93219 = LINE('',#93220,#93221); +#93220 = CARTESIAN_POINT('',(1.725,0.875,0.2)); +#93221 = VECTOR('',#93222,1.); +#93222 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93223 = ORIENTED_EDGE('',*,*,#93224,.F.); +#93224 = EDGE_CURVE('',#93206,#93217,#93225,.T.); +#93225 = LINE('',#93226,#93227); +#93226 = CARTESIAN_POINT('',(2.,0.875,0.)); +#93227 = VECTOR('',#93228,1.); +#93228 = DIRECTION('',(0.,0.,1.)); +#93229 = PLANE('',#93230); +#93230 = AXIS2_PLACEMENT_3D('',#93231,#93232,#93233); +#93231 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93232 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93233 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93234 = ADVANCED_FACE('',(#93235),#93361,.T.); +#93235 = FACE_BOUND('',#93236,.T.); +#93236 = EDGE_LOOP('',(#93237,#93243,#93244,#93245,#93253,#93261,#93267, + #93268,#93276,#93284,#93290,#93291,#93299,#93307,#93313,#93314, + #93322,#93330,#93336,#93337,#93345,#93353,#93359,#93360)); +#93237 = ORIENTED_EDGE('',*,*,#93238,.F.); +#93238 = EDGE_CURVE('',#91597,#92664,#93239,.T.); +#93239 = LINE('',#93240,#93241); +#93240 = CARTESIAN_POINT('',(-1.99,-2.49,0.77)); +#93241 = VECTOR('',#93242,1.); +#93242 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93243 = ORIENTED_EDGE('',*,*,#91604,.F.); +#93244 = ORIENTED_EDGE('',*,*,#90847,.T.); +#93245 = ORIENTED_EDGE('',*,*,#93246,.T.); +#93246 = EDGE_CURVE('',#90848,#93247,#93249,.T.); +#93247 = VERTEX_POINT('',#93248); +#93248 = CARTESIAN_POINT('',(-1.125,-2.49,0.2)); +#93249 = LINE('',#93250,#93251); +#93250 = CARTESIAN_POINT('',(-1.125,-2.49,1.E-02)); +#93251 = VECTOR('',#93252,1.); +#93252 = DIRECTION('',(0.,0.,1.)); +#93253 = ORIENTED_EDGE('',*,*,#93254,.T.); +#93254 = EDGE_CURVE('',#93247,#93255,#93257,.T.); +#93255 = VERTEX_POINT('',#93256); +#93256 = CARTESIAN_POINT('',(-0.875,-2.49,0.2)); +#93257 = LINE('',#93258,#93259); +#93258 = CARTESIAN_POINT('',(-1.4325,-2.49,0.2)); +#93259 = VECTOR('',#93260,1.); +#93260 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93261 = ORIENTED_EDGE('',*,*,#93262,.T.); +#93262 = EDGE_CURVE('',#93255,#90873,#93263,.T.); +#93263 = LINE('',#93264,#93265); +#93264 = CARTESIAN_POINT('',(-0.875,-2.49,1.E-02)); +#93265 = VECTOR('',#93266,1.); +#93266 = DIRECTION('',(-0.,0.,-1.)); +#93267 = ORIENTED_EDGE('',*,*,#90880,.T.); +#93268 = ORIENTED_EDGE('',*,*,#93269,.T.); +#93269 = EDGE_CURVE('',#90881,#93270,#93272,.T.); +#93270 = VERTEX_POINT('',#93271); +#93271 = CARTESIAN_POINT('',(-0.625,-2.49,0.2)); +#93272 = LINE('',#93273,#93274); +#93273 = CARTESIAN_POINT('',(-0.625,-2.49,1.E-02)); +#93274 = VECTOR('',#93275,1.); +#93275 = DIRECTION('',(0.,0.,1.)); +#93276 = ORIENTED_EDGE('',*,*,#93277,.T.); +#93277 = EDGE_CURVE('',#93270,#93278,#93280,.T.); +#93278 = VERTEX_POINT('',#93279); +#93279 = CARTESIAN_POINT('',(-0.375,-2.49,0.2)); +#93280 = LINE('',#93281,#93282); +#93281 = CARTESIAN_POINT('',(-1.1825,-2.49,0.2)); +#93282 = VECTOR('',#93283,1.); +#93283 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93284 = ORIENTED_EDGE('',*,*,#93285,.T.); +#93285 = EDGE_CURVE('',#93278,#90906,#93286,.T.); +#93286 = LINE('',#93287,#93288); +#93287 = CARTESIAN_POINT('',(-0.375,-2.49,1.E-02)); +#93288 = VECTOR('',#93289,1.); +#93289 = DIRECTION('',(-0.,0.,-1.)); +#93290 = ORIENTED_EDGE('',*,*,#90913,.T.); +#93291 = ORIENTED_EDGE('',*,*,#93292,.T.); +#93292 = EDGE_CURVE('',#90914,#93293,#93295,.T.); +#93293 = VERTEX_POINT('',#93294); +#93294 = CARTESIAN_POINT('',(-0.125,-2.49,0.2)); +#93295 = LINE('',#93296,#93297); +#93296 = CARTESIAN_POINT('',(-0.125,-2.49,1.E-02)); +#93297 = VECTOR('',#93298,1.); +#93298 = DIRECTION('',(0.,0.,1.)); +#93299 = ORIENTED_EDGE('',*,*,#93300,.T.); +#93300 = EDGE_CURVE('',#93293,#93301,#93303,.T.); +#93301 = VERTEX_POINT('',#93302); +#93302 = CARTESIAN_POINT('',(0.125,-2.49,0.2)); +#93303 = LINE('',#93304,#93305); +#93304 = CARTESIAN_POINT('',(-0.9325,-2.49,0.2)); +#93305 = VECTOR('',#93306,1.); +#93306 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93307 = ORIENTED_EDGE('',*,*,#93308,.T.); +#93308 = EDGE_CURVE('',#93301,#90939,#93309,.T.); +#93309 = LINE('',#93310,#93311); +#93310 = CARTESIAN_POINT('',(0.125,-2.49,1.E-02)); +#93311 = VECTOR('',#93312,1.); +#93312 = DIRECTION('',(-0.,0.,-1.)); +#93313 = ORIENTED_EDGE('',*,*,#90946,.T.); +#93314 = ORIENTED_EDGE('',*,*,#93315,.T.); +#93315 = EDGE_CURVE('',#90947,#93316,#93318,.T.); +#93316 = VERTEX_POINT('',#93317); +#93317 = CARTESIAN_POINT('',(0.375,-2.49,0.2)); +#93318 = LINE('',#93319,#93320); +#93319 = CARTESIAN_POINT('',(0.375,-2.49,1.E-02)); +#93320 = VECTOR('',#93321,1.); +#93321 = DIRECTION('',(0.,0.,1.)); +#93322 = ORIENTED_EDGE('',*,*,#93323,.T.); +#93323 = EDGE_CURVE('',#93316,#93324,#93326,.T.); +#93324 = VERTEX_POINT('',#93325); +#93325 = CARTESIAN_POINT('',(0.625,-2.49,0.2)); +#93326 = LINE('',#93327,#93328); +#93327 = CARTESIAN_POINT('',(-0.6825,-2.49,0.2)); +#93328 = VECTOR('',#93329,1.); +#93329 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93330 = ORIENTED_EDGE('',*,*,#93331,.T.); +#93331 = EDGE_CURVE('',#93324,#90972,#93332,.T.); +#93332 = LINE('',#93333,#93334); +#93333 = CARTESIAN_POINT('',(0.625,-2.49,1.E-02)); +#93334 = VECTOR('',#93335,1.); +#93335 = DIRECTION('',(-0.,0.,-1.)); +#93336 = ORIENTED_EDGE('',*,*,#90979,.T.); +#93337 = ORIENTED_EDGE('',*,*,#93338,.T.); +#93338 = EDGE_CURVE('',#90980,#93339,#93341,.T.); +#93339 = VERTEX_POINT('',#93340); +#93340 = CARTESIAN_POINT('',(0.875,-2.49,0.2)); +#93341 = LINE('',#93342,#93343); +#93342 = CARTESIAN_POINT('',(0.875,-2.49,1.E-02)); +#93343 = VECTOR('',#93344,1.); +#93344 = DIRECTION('',(0.,0.,1.)); +#93345 = ORIENTED_EDGE('',*,*,#93346,.T.); +#93346 = EDGE_CURVE('',#93339,#93347,#93349,.T.); +#93347 = VERTEX_POINT('',#93348); +#93348 = CARTESIAN_POINT('',(1.125,-2.49,0.2)); +#93349 = LINE('',#93350,#93351); +#93350 = CARTESIAN_POINT('',(-0.4325,-2.49,0.2)); +#93351 = VECTOR('',#93352,1.); +#93352 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93353 = ORIENTED_EDGE('',*,*,#93354,.T.); +#93354 = EDGE_CURVE('',#93347,#91005,#93355,.T.); +#93355 = LINE('',#93356,#93357); +#93356 = CARTESIAN_POINT('',(1.125,-2.49,1.E-02)); +#93357 = VECTOR('',#93358,1.); +#93358 = DIRECTION('',(-0.,0.,-1.)); +#93359 = ORIENTED_EDGE('',*,*,#91012,.T.); +#93360 = ORIENTED_EDGE('',*,*,#92671,.T.); +#93361 = PLANE('',#93362); +#93362 = AXIS2_PLACEMENT_3D('',#93363,#93364,#93365); +#93363 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#93364 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#93365 = DIRECTION('',(0.,0.,1.)); +#93366 = ADVANCED_FACE('',(#93367),#93401,.F.); +#93367 = FACE_BOUND('',#93368,.F.); +#93368 = EDGE_LOOP('',(#93369,#93379,#93387,#93393,#93394,#93395)); +#93369 = ORIENTED_EDGE('',*,*,#93370,.F.); +#93370 = EDGE_CURVE('',#93371,#93373,#93375,.T.); +#93371 = VERTEX_POINT('',#93372); +#93372 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93373 = VERTEX_POINT('',#93374); +#93374 = CARTESIAN_POINT('',(1.725,0.625,0.)); +#93375 = LINE('',#93376,#93377); +#93376 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93377 = VECTOR('',#93378,1.); +#93378 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93379 = ORIENTED_EDGE('',*,*,#93380,.T.); +#93380 = EDGE_CURVE('',#93371,#93381,#93383,.T.); +#93381 = VERTEX_POINT('',#93382); +#93382 = CARTESIAN_POINT('',(2.,0.625,0.2)); +#93383 = LINE('',#93384,#93385); +#93384 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93385 = VECTOR('',#93386,1.); +#93386 = DIRECTION('',(0.,0.,1.)); +#93387 = ORIENTED_EDGE('',*,*,#93388,.T.); +#93388 = EDGE_CURVE('',#93381,#92779,#93389,.T.); +#93389 = LINE('',#93390,#93391); +#93390 = CARTESIAN_POINT('',(2.,0.625,0.2)); +#93391 = VECTOR('',#93392,1.); +#93392 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93393 = ORIENTED_EDGE('',*,*,#92786,.T.); +#93394 = ORIENTED_EDGE('',*,*,#91177,.F.); +#93395 = ORIENTED_EDGE('',*,*,#93396,.F.); +#93396 = EDGE_CURVE('',#93373,#91169,#93397,.T.); +#93397 = LINE('',#93398,#93399); +#93398 = CARTESIAN_POINT('',(1.725,0.625,0.)); +#93399 = VECTOR('',#93400,1.); +#93400 = DIRECTION('',(0.,0.,1.)); +#93401 = PLANE('',#93402); +#93402 = AXIS2_PLACEMENT_3D('',#93403,#93404,#93405); +#93403 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93404 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93405 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93406 = ADVANCED_FACE('',(#93407),#93441,.F.); +#93407 = FACE_BOUND('',#93408,.F.); +#93408 = EDGE_LOOP('',(#93409,#93419,#93425,#93426,#93427,#93435)); +#93409 = ORIENTED_EDGE('',*,*,#93410,.F.); +#93410 = EDGE_CURVE('',#93411,#93413,#93415,.T.); +#93411 = VERTEX_POINT('',#93412); +#93412 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93413 = VERTEX_POINT('',#93414); +#93414 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#93415 = LINE('',#93416,#93417); +#93416 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93417 = VECTOR('',#93418,1.); +#93418 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93419 = ORIENTED_EDGE('',*,*,#93420,.T.); +#93420 = EDGE_CURVE('',#93411,#90856,#93421,.T.); +#93421 = LINE('',#93422,#93423); +#93422 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93423 = VECTOR('',#93424,1.); +#93424 = DIRECTION('',(0.,0.,1.)); +#93425 = ORIENTED_EDGE('',*,*,#90855,.F.); +#93426 = ORIENTED_EDGE('',*,*,#93246,.T.); +#93427 = ORIENTED_EDGE('',*,*,#93428,.T.); +#93428 = EDGE_CURVE('',#93247,#93429,#93431,.T.); +#93429 = VERTEX_POINT('',#93430); +#93430 = CARTESIAN_POINT('',(-1.125,-2.5,0.2)); +#93431 = LINE('',#93432,#93433); +#93432 = CARTESIAN_POINT('',(-1.125,-2.225,0.2)); +#93433 = VECTOR('',#93434,1.); +#93434 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93435 = ORIENTED_EDGE('',*,*,#93436,.F.); +#93436 = EDGE_CURVE('',#93413,#93429,#93437,.T.); +#93437 = LINE('',#93438,#93439); +#93438 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#93439 = VECTOR('',#93440,1.); +#93440 = DIRECTION('',(0.,0.,1.)); +#93441 = PLANE('',#93442); +#93442 = AXIS2_PLACEMENT_3D('',#93443,#93444,#93445); +#93443 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93444 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93445 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93446 = ADVANCED_FACE('',(#93447),#93466,.T.); +#93447 = FACE_BOUND('',#93448,.T.); +#93448 = EDGE_LOOP('',(#93449,#93457,#93458,#93459)); +#93449 = ORIENTED_EDGE('',*,*,#93450,.T.); +#93450 = EDGE_CURVE('',#93451,#91161,#93453,.T.); +#93451 = VERTEX_POINT('',#93452); +#93452 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93453 = LINE('',#93454,#93455); +#93454 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93455 = VECTOR('',#93456,1.); +#93456 = DIRECTION('',(0.,0.,1.)); +#93457 = ORIENTED_EDGE('',*,*,#91168,.T.); +#93458 = ORIENTED_EDGE('',*,*,#93396,.F.); +#93459 = ORIENTED_EDGE('',*,*,#93460,.T.); +#93460 = EDGE_CURVE('',#93373,#93451,#93461,.T.); +#93461 = CIRCLE('',#93462,0.125); +#93462 = AXIS2_PLACEMENT_3D('',#93463,#93464,#93465); +#93463 = CARTESIAN_POINT('',(1.725,0.5,0.)); +#93464 = DIRECTION('',(0.,-0.,1.)); +#93465 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93466 = CYLINDRICAL_SURFACE('',#93467,0.125); +#93467 = AXIS2_PLACEMENT_3D('',#93468,#93469,#93470); +#93468 = CARTESIAN_POINT('',(1.725,0.5,0.)); +#93469 = DIRECTION('',(0.,-0.,-1.)); +#93470 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93471 = ADVANCED_FACE('',(#93472),#93491,.T.); +#93472 = FACE_BOUND('',#93473,.T.); +#93473 = EDGE_LOOP('',(#93474,#93475,#93476,#93484)); +#93474 = ORIENTED_EDGE('',*,*,#93420,.T.); +#93475 = ORIENTED_EDGE('',*,*,#90863,.T.); +#93476 = ORIENTED_EDGE('',*,*,#93477,.F.); +#93477 = EDGE_CURVE('',#93478,#90864,#93480,.T.); +#93478 = VERTEX_POINT('',#93479); +#93479 = CARTESIAN_POINT('',(-0.875,-2.225,0.)); +#93480 = LINE('',#93481,#93482); +#93481 = CARTESIAN_POINT('',(-0.875,-2.225,0.)); +#93482 = VECTOR('',#93483,1.); +#93483 = DIRECTION('',(0.,0.,1.)); +#93484 = ORIENTED_EDGE('',*,*,#93485,.T.); +#93485 = EDGE_CURVE('',#93478,#93411,#93486,.T.); +#93486 = CIRCLE('',#93487,0.125); +#93487 = AXIS2_PLACEMENT_3D('',#93488,#93489,#93490); +#93488 = CARTESIAN_POINT('',(-1.,-2.225,0.)); +#93489 = DIRECTION('',(-0.,0.,1.)); +#93490 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93491 = CYLINDRICAL_SURFACE('',#93492,0.125); +#93492 = AXIS2_PLACEMENT_3D('',#93493,#93494,#93495); +#93493 = CARTESIAN_POINT('',(-1.,-2.225,0.)); +#93494 = DIRECTION('',(-0.,0.,-1.)); +#93495 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#93496 = ADVANCED_FACE('',(#93497),#93524,.F.); +#93497 = FACE_BOUND('',#93498,.F.); +#93498 = EDGE_LOOP('',(#93499,#93507,#93508,#93509,#93510,#93518)); +#93499 = ORIENTED_EDGE('',*,*,#93500,.F.); +#93500 = EDGE_CURVE('',#93451,#93501,#93503,.T.); +#93501 = VERTEX_POINT('',#93502); +#93502 = CARTESIAN_POINT('',(2.,0.375,0.)); +#93503 = LINE('',#93504,#93505); +#93504 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93505 = VECTOR('',#93506,1.); +#93506 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93507 = ORIENTED_EDGE('',*,*,#93450,.T.); +#93508 = ORIENTED_EDGE('',*,*,#91160,.F.); +#93509 = ORIENTED_EDGE('',*,*,#92770,.T.); +#93510 = ORIENTED_EDGE('',*,*,#93511,.T.); +#93511 = EDGE_CURVE('',#92771,#93512,#93514,.T.); +#93512 = VERTEX_POINT('',#93513); +#93513 = CARTESIAN_POINT('',(2.,0.375,0.2)); +#93514 = LINE('',#93515,#93516); +#93515 = CARTESIAN_POINT('',(1.725,0.375,0.2)); +#93516 = VECTOR('',#93517,1.); +#93517 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93518 = ORIENTED_EDGE('',*,*,#93519,.F.); +#93519 = EDGE_CURVE('',#93501,#93512,#93520,.T.); +#93520 = LINE('',#93521,#93522); +#93521 = CARTESIAN_POINT('',(2.,0.375,0.)); +#93522 = VECTOR('',#93523,1.); +#93523 = DIRECTION('',(0.,0.,1.)); +#93524 = PLANE('',#93525); +#93525 = AXIS2_PLACEMENT_3D('',#93526,#93527,#93528); +#93526 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93527 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93528 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93529 = ADVANCED_FACE('',(#93530),#93557,.F.); +#93530 = FACE_BOUND('',#93531,.F.); +#93531 = EDGE_LOOP('',(#93532,#93540,#93548,#93554,#93555,#93556)); +#93532 = ORIENTED_EDGE('',*,*,#93533,.F.); +#93533 = EDGE_CURVE('',#93534,#93478,#93536,.T.); +#93534 = VERTEX_POINT('',#93535); +#93535 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93536 = LINE('',#93537,#93538); +#93537 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93538 = VECTOR('',#93539,1.); +#93539 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93540 = ORIENTED_EDGE('',*,*,#93541,.T.); +#93541 = EDGE_CURVE('',#93534,#93542,#93544,.T.); +#93542 = VERTEX_POINT('',#93543); +#93543 = CARTESIAN_POINT('',(-0.875,-2.5,0.2)); +#93544 = LINE('',#93545,#93546); +#93545 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93546 = VECTOR('',#93547,1.); +#93547 = DIRECTION('',(0.,0.,1.)); +#93548 = ORIENTED_EDGE('',*,*,#93549,.T.); +#93549 = EDGE_CURVE('',#93542,#93255,#93550,.T.); +#93550 = LINE('',#93551,#93552); +#93551 = CARTESIAN_POINT('',(-0.875,-2.5,0.2)); +#93552 = VECTOR('',#93553,1.); +#93553 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93554 = ORIENTED_EDGE('',*,*,#93262,.T.); +#93555 = ORIENTED_EDGE('',*,*,#90872,.F.); +#93556 = ORIENTED_EDGE('',*,*,#93477,.F.); +#93557 = PLANE('',#93558); +#93558 = AXIS2_PLACEMENT_3D('',#93559,#93560,#93561); +#93559 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93560 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#93561 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93562 = ADVANCED_FACE('',(#93563),#93597,.F.); +#93563 = FACE_BOUND('',#93564,.F.); +#93564 = EDGE_LOOP('',(#93565,#93575,#93583,#93589,#93590,#93591)); +#93565 = ORIENTED_EDGE('',*,*,#93566,.F.); +#93566 = EDGE_CURVE('',#93567,#93569,#93571,.T.); +#93567 = VERTEX_POINT('',#93568); +#93568 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93569 = VERTEX_POINT('',#93570); +#93570 = CARTESIAN_POINT('',(1.725,0.125,0.)); +#93571 = LINE('',#93572,#93573); +#93572 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93573 = VECTOR('',#93574,1.); +#93574 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93575 = ORIENTED_EDGE('',*,*,#93576,.T.); +#93576 = EDGE_CURVE('',#93567,#93577,#93579,.T.); +#93577 = VERTEX_POINT('',#93578); +#93578 = CARTESIAN_POINT('',(2.,0.125,0.2)); +#93579 = LINE('',#93580,#93581); +#93580 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93581 = VECTOR('',#93582,1.); +#93582 = DIRECTION('',(0.,0.,1.)); +#93583 = ORIENTED_EDGE('',*,*,#93584,.T.); +#93584 = EDGE_CURVE('',#93577,#92756,#93585,.T.); +#93585 = LINE('',#93586,#93587); +#93586 = CARTESIAN_POINT('',(2.,0.125,0.2)); +#93587 = VECTOR('',#93588,1.); +#93588 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93589 = ORIENTED_EDGE('',*,*,#92763,.T.); +#93590 = ORIENTED_EDGE('',*,*,#91144,.F.); +#93591 = ORIENTED_EDGE('',*,*,#93592,.F.); +#93592 = EDGE_CURVE('',#93569,#91136,#93593,.T.); +#93593 = LINE('',#93594,#93595); +#93594 = CARTESIAN_POINT('',(1.725,0.125,0.)); +#93595 = VECTOR('',#93596,1.); +#93596 = DIRECTION('',(0.,0.,1.)); +#93597 = PLANE('',#93598); +#93598 = AXIS2_PLACEMENT_3D('',#93599,#93600,#93601); +#93599 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93600 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93601 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93602 = ADVANCED_FACE('',(#93603),#93637,.F.); +#93603 = FACE_BOUND('',#93604,.F.); +#93604 = EDGE_LOOP('',(#93605,#93615,#93621,#93622,#93623,#93631)); +#93605 = ORIENTED_EDGE('',*,*,#93606,.F.); +#93606 = EDGE_CURVE('',#93607,#93609,#93611,.T.); +#93607 = VERTEX_POINT('',#93608); +#93608 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93609 = VERTEX_POINT('',#93610); +#93610 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#93611 = LINE('',#93612,#93613); +#93612 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93613 = VECTOR('',#93614,1.); +#93614 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93615 = ORIENTED_EDGE('',*,*,#93616,.T.); +#93616 = EDGE_CURVE('',#93607,#90889,#93617,.T.); +#93617 = LINE('',#93618,#93619); +#93618 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93619 = VECTOR('',#93620,1.); +#93620 = DIRECTION('',(0.,0.,1.)); +#93621 = ORIENTED_EDGE('',*,*,#90888,.F.); +#93622 = ORIENTED_EDGE('',*,*,#93269,.T.); +#93623 = ORIENTED_EDGE('',*,*,#93624,.T.); +#93624 = EDGE_CURVE('',#93270,#93625,#93627,.T.); +#93625 = VERTEX_POINT('',#93626); +#93626 = CARTESIAN_POINT('',(-0.625,-2.5,0.2)); +#93627 = LINE('',#93628,#93629); +#93628 = CARTESIAN_POINT('',(-0.625,-2.225,0.2)); +#93629 = VECTOR('',#93630,1.); +#93630 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93631 = ORIENTED_EDGE('',*,*,#93632,.F.); +#93632 = EDGE_CURVE('',#93609,#93625,#93633,.T.); +#93633 = LINE('',#93634,#93635); +#93634 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#93635 = VECTOR('',#93636,1.); +#93636 = DIRECTION('',(0.,0.,1.)); +#93637 = PLANE('',#93638); +#93638 = AXIS2_PLACEMENT_3D('',#93639,#93640,#93641); +#93639 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93640 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93641 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93642 = ADVANCED_FACE('',(#93643),#93662,.T.); +#93643 = FACE_BOUND('',#93644,.T.); +#93644 = EDGE_LOOP('',(#93645,#93653,#93654,#93655)); +#93645 = ORIENTED_EDGE('',*,*,#93646,.T.); +#93646 = EDGE_CURVE('',#93647,#91128,#93649,.T.); +#93647 = VERTEX_POINT('',#93648); +#93648 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93649 = LINE('',#93650,#93651); +#93650 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93651 = VECTOR('',#93652,1.); +#93652 = DIRECTION('',(0.,0.,1.)); +#93653 = ORIENTED_EDGE('',*,*,#91135,.T.); +#93654 = ORIENTED_EDGE('',*,*,#93592,.F.); +#93655 = ORIENTED_EDGE('',*,*,#93656,.T.); +#93656 = EDGE_CURVE('',#93569,#93647,#93657,.T.); +#93657 = CIRCLE('',#93658,0.125); +#93658 = AXIS2_PLACEMENT_3D('',#93659,#93660,#93661); +#93659 = CARTESIAN_POINT('',(1.725,-3.330669073875E-16,0.)); +#93660 = DIRECTION('',(0.,-0.,1.)); +#93661 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93662 = CYLINDRICAL_SURFACE('',#93663,0.125); +#93663 = AXIS2_PLACEMENT_3D('',#93664,#93665,#93666); +#93664 = CARTESIAN_POINT('',(1.725,-3.330669073875E-16,0.)); +#93665 = DIRECTION('',(0.,-0.,-1.)); +#93666 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93667 = ADVANCED_FACE('',(#93668),#93687,.T.); +#93668 = FACE_BOUND('',#93669,.T.); +#93669 = EDGE_LOOP('',(#93670,#93671,#93672,#93680)); +#93670 = ORIENTED_EDGE('',*,*,#93616,.T.); +#93671 = ORIENTED_EDGE('',*,*,#90896,.T.); +#93672 = ORIENTED_EDGE('',*,*,#93673,.F.); +#93673 = EDGE_CURVE('',#93674,#90897,#93676,.T.); +#93674 = VERTEX_POINT('',#93675); +#93675 = CARTESIAN_POINT('',(-0.375,-2.225,0.)); +#93676 = LINE('',#93677,#93678); +#93677 = CARTESIAN_POINT('',(-0.375,-2.225,0.)); +#93678 = VECTOR('',#93679,1.); +#93679 = DIRECTION('',(0.,0.,1.)); +#93680 = ORIENTED_EDGE('',*,*,#93681,.T.); +#93681 = EDGE_CURVE('',#93674,#93607,#93682,.T.); +#93682 = CIRCLE('',#93683,0.125); +#93683 = AXIS2_PLACEMENT_3D('',#93684,#93685,#93686); +#93684 = CARTESIAN_POINT('',(-0.5,-2.225,0.)); +#93685 = DIRECTION('',(-0.,0.,1.)); +#93686 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93687 = CYLINDRICAL_SURFACE('',#93688,0.125); +#93688 = AXIS2_PLACEMENT_3D('',#93689,#93690,#93691); +#93689 = CARTESIAN_POINT('',(-0.5,-2.225,0.)); +#93690 = DIRECTION('',(-0.,0.,-1.)); +#93691 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#93692 = ADVANCED_FACE('',(#93693),#93720,.F.); +#93693 = FACE_BOUND('',#93694,.F.); +#93694 = EDGE_LOOP('',(#93695,#93703,#93704,#93705,#93706,#93714)); +#93695 = ORIENTED_EDGE('',*,*,#93696,.F.); +#93696 = EDGE_CURVE('',#93647,#93697,#93699,.T.); +#93697 = VERTEX_POINT('',#93698); +#93698 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#93699 = LINE('',#93700,#93701); +#93700 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93701 = VECTOR('',#93702,1.); +#93702 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93703 = ORIENTED_EDGE('',*,*,#93646,.T.); +#93704 = ORIENTED_EDGE('',*,*,#91127,.F.); +#93705 = ORIENTED_EDGE('',*,*,#92747,.T.); +#93706 = ORIENTED_EDGE('',*,*,#93707,.T.); +#93707 = EDGE_CURVE('',#92748,#93708,#93710,.T.); +#93708 = VERTEX_POINT('',#93709); +#93709 = CARTESIAN_POINT('',(2.,-0.125,0.2)); +#93710 = LINE('',#93711,#93712); +#93711 = CARTESIAN_POINT('',(1.725,-0.125,0.2)); +#93712 = VECTOR('',#93713,1.); +#93713 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93714 = ORIENTED_EDGE('',*,*,#93715,.F.); +#93715 = EDGE_CURVE('',#93697,#93708,#93716,.T.); +#93716 = LINE('',#93717,#93718); +#93717 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#93718 = VECTOR('',#93719,1.); +#93719 = DIRECTION('',(0.,0.,1.)); +#93720 = PLANE('',#93721); +#93721 = AXIS2_PLACEMENT_3D('',#93722,#93723,#93724); +#93722 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93723 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93724 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93725 = ADVANCED_FACE('',(#93726),#93753,.F.); +#93726 = FACE_BOUND('',#93727,.F.); +#93727 = EDGE_LOOP('',(#93728,#93736,#93744,#93750,#93751,#93752)); +#93728 = ORIENTED_EDGE('',*,*,#93729,.F.); +#93729 = EDGE_CURVE('',#93730,#93674,#93732,.T.); +#93730 = VERTEX_POINT('',#93731); +#93731 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93732 = LINE('',#93733,#93734); +#93733 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93734 = VECTOR('',#93735,1.); +#93735 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93736 = ORIENTED_EDGE('',*,*,#93737,.T.); +#93737 = EDGE_CURVE('',#93730,#93738,#93740,.T.); +#93738 = VERTEX_POINT('',#93739); +#93739 = CARTESIAN_POINT('',(-0.375,-2.5,0.2)); +#93740 = LINE('',#93741,#93742); +#93741 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93742 = VECTOR('',#93743,1.); +#93743 = DIRECTION('',(0.,0.,1.)); +#93744 = ORIENTED_EDGE('',*,*,#93745,.T.); +#93745 = EDGE_CURVE('',#93738,#93278,#93746,.T.); +#93746 = LINE('',#93747,#93748); +#93747 = CARTESIAN_POINT('',(-0.375,-2.5,0.2)); +#93748 = VECTOR('',#93749,1.); +#93749 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93750 = ORIENTED_EDGE('',*,*,#93285,.T.); +#93751 = ORIENTED_EDGE('',*,*,#90905,.F.); +#93752 = ORIENTED_EDGE('',*,*,#93673,.F.); +#93753 = PLANE('',#93754); +#93754 = AXIS2_PLACEMENT_3D('',#93755,#93756,#93757); +#93755 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93756 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#93757 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93758 = ADVANCED_FACE('',(#93759),#93793,.F.); +#93759 = FACE_BOUND('',#93760,.F.); +#93760 = EDGE_LOOP('',(#93761,#93771,#93779,#93785,#93786,#93787)); +#93761 = ORIENTED_EDGE('',*,*,#93762,.F.); +#93762 = EDGE_CURVE('',#93763,#93765,#93767,.T.); +#93763 = VERTEX_POINT('',#93764); +#93764 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93765 = VERTEX_POINT('',#93766); +#93766 = CARTESIAN_POINT('',(1.725,-0.375,0.)); +#93767 = LINE('',#93768,#93769); +#93768 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93769 = VECTOR('',#93770,1.); +#93770 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93771 = ORIENTED_EDGE('',*,*,#93772,.T.); +#93772 = EDGE_CURVE('',#93763,#93773,#93775,.T.); +#93773 = VERTEX_POINT('',#93774); +#93774 = CARTESIAN_POINT('',(2.,-0.375,0.2)); +#93775 = LINE('',#93776,#93777); +#93776 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93777 = VECTOR('',#93778,1.); +#93778 = DIRECTION('',(0.,0.,1.)); +#93779 = ORIENTED_EDGE('',*,*,#93780,.T.); +#93780 = EDGE_CURVE('',#93773,#92733,#93781,.T.); +#93781 = LINE('',#93782,#93783); +#93782 = CARTESIAN_POINT('',(2.,-0.375,0.2)); +#93783 = VECTOR('',#93784,1.); +#93784 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93785 = ORIENTED_EDGE('',*,*,#92740,.T.); +#93786 = ORIENTED_EDGE('',*,*,#91111,.F.); +#93787 = ORIENTED_EDGE('',*,*,#93788,.F.); +#93788 = EDGE_CURVE('',#93765,#91103,#93789,.T.); +#93789 = LINE('',#93790,#93791); +#93790 = CARTESIAN_POINT('',(1.725,-0.375,0.)); +#93791 = VECTOR('',#93792,1.); +#93792 = DIRECTION('',(0.,0.,1.)); +#93793 = PLANE('',#93794); +#93794 = AXIS2_PLACEMENT_3D('',#93795,#93796,#93797); +#93795 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93796 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93797 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93798 = ADVANCED_FACE('',(#93799),#93833,.F.); +#93799 = FACE_BOUND('',#93800,.F.); +#93800 = EDGE_LOOP('',(#93801,#93811,#93817,#93818,#93819,#93827)); +#93801 = ORIENTED_EDGE('',*,*,#93802,.F.); +#93802 = EDGE_CURVE('',#93803,#93805,#93807,.T.); +#93803 = VERTEX_POINT('',#93804); +#93804 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93805 = VERTEX_POINT('',#93806); +#93806 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#93807 = LINE('',#93808,#93809); +#93808 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93809 = VECTOR('',#93810,1.); +#93810 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93811 = ORIENTED_EDGE('',*,*,#93812,.T.); +#93812 = EDGE_CURVE('',#93803,#90922,#93813,.T.); +#93813 = LINE('',#93814,#93815); +#93814 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93815 = VECTOR('',#93816,1.); +#93816 = DIRECTION('',(0.,0.,1.)); +#93817 = ORIENTED_EDGE('',*,*,#90921,.F.); +#93818 = ORIENTED_EDGE('',*,*,#93292,.T.); +#93819 = ORIENTED_EDGE('',*,*,#93820,.T.); +#93820 = EDGE_CURVE('',#93293,#93821,#93823,.T.); +#93821 = VERTEX_POINT('',#93822); +#93822 = CARTESIAN_POINT('',(-0.125,-2.5,0.2)); +#93823 = LINE('',#93824,#93825); +#93824 = CARTESIAN_POINT('',(-0.125,-2.225,0.2)); +#93825 = VECTOR('',#93826,1.); +#93826 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93827 = ORIENTED_EDGE('',*,*,#93828,.F.); +#93828 = EDGE_CURVE('',#93805,#93821,#93829,.T.); +#93829 = LINE('',#93830,#93831); +#93830 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#93831 = VECTOR('',#93832,1.); +#93832 = DIRECTION('',(0.,0.,1.)); +#93833 = PLANE('',#93834); +#93834 = AXIS2_PLACEMENT_3D('',#93835,#93836,#93837); +#93835 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93836 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93837 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93838 = ADVANCED_FACE('',(#93839),#93858,.T.); +#93839 = FACE_BOUND('',#93840,.T.); +#93840 = EDGE_LOOP('',(#93841,#93849,#93850,#93851)); +#93841 = ORIENTED_EDGE('',*,*,#93842,.T.); +#93842 = EDGE_CURVE('',#93843,#91095,#93845,.T.); +#93843 = VERTEX_POINT('',#93844); +#93844 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93845 = LINE('',#93846,#93847); +#93846 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93847 = VECTOR('',#93848,1.); +#93848 = DIRECTION('',(0.,0.,1.)); +#93849 = ORIENTED_EDGE('',*,*,#91102,.T.); +#93850 = ORIENTED_EDGE('',*,*,#93788,.F.); +#93851 = ORIENTED_EDGE('',*,*,#93852,.T.); +#93852 = EDGE_CURVE('',#93765,#93843,#93853,.T.); +#93853 = CIRCLE('',#93854,0.125); +#93854 = AXIS2_PLACEMENT_3D('',#93855,#93856,#93857); +#93855 = CARTESIAN_POINT('',(1.725,-0.5,0.)); +#93856 = DIRECTION('',(0.,-0.,1.)); +#93857 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93858 = CYLINDRICAL_SURFACE('',#93859,0.125); +#93859 = AXIS2_PLACEMENT_3D('',#93860,#93861,#93862); +#93860 = CARTESIAN_POINT('',(1.725,-0.5,0.)); +#93861 = DIRECTION('',(0.,-0.,-1.)); +#93862 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93863 = ADVANCED_FACE('',(#93864),#93883,.T.); +#93864 = FACE_BOUND('',#93865,.T.); +#93865 = EDGE_LOOP('',(#93866,#93867,#93868,#93876)); +#93866 = ORIENTED_EDGE('',*,*,#93812,.T.); +#93867 = ORIENTED_EDGE('',*,*,#90929,.T.); +#93868 = ORIENTED_EDGE('',*,*,#93869,.F.); +#93869 = EDGE_CURVE('',#93870,#90930,#93872,.T.); +#93870 = VERTEX_POINT('',#93871); +#93871 = CARTESIAN_POINT('',(0.125,-2.225,0.)); +#93872 = LINE('',#93873,#93874); +#93873 = CARTESIAN_POINT('',(0.125,-2.225,0.)); +#93874 = VECTOR('',#93875,1.); +#93875 = DIRECTION('',(0.,0.,1.)); +#93876 = ORIENTED_EDGE('',*,*,#93877,.T.); +#93877 = EDGE_CURVE('',#93870,#93803,#93878,.T.); +#93878 = CIRCLE('',#93879,0.125); +#93879 = AXIS2_PLACEMENT_3D('',#93880,#93881,#93882); +#93880 = CARTESIAN_POINT('',(-9.159339953158E-16,-2.225,0.)); +#93881 = DIRECTION('',(-0.,0.,1.)); +#93882 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93883 = CYLINDRICAL_SURFACE('',#93884,0.125); +#93884 = AXIS2_PLACEMENT_3D('',#93885,#93886,#93887); +#93885 = CARTESIAN_POINT('',(-9.159339953158E-16,-2.225,0.)); +#93886 = DIRECTION('',(-0.,0.,-1.)); +#93887 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#93888 = ADVANCED_FACE('',(#93889),#93916,.F.); +#93889 = FACE_BOUND('',#93890,.F.); +#93890 = EDGE_LOOP('',(#93891,#93899,#93900,#93901,#93902,#93910)); +#93891 = ORIENTED_EDGE('',*,*,#93892,.F.); +#93892 = EDGE_CURVE('',#93843,#93893,#93895,.T.); +#93893 = VERTEX_POINT('',#93894); +#93894 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#93895 = LINE('',#93896,#93897); +#93896 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93897 = VECTOR('',#93898,1.); +#93898 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93899 = ORIENTED_EDGE('',*,*,#93842,.T.); +#93900 = ORIENTED_EDGE('',*,*,#91094,.F.); +#93901 = ORIENTED_EDGE('',*,*,#92724,.T.); +#93902 = ORIENTED_EDGE('',*,*,#93903,.T.); +#93903 = EDGE_CURVE('',#92725,#93904,#93906,.T.); +#93904 = VERTEX_POINT('',#93905); +#93905 = CARTESIAN_POINT('',(2.,-0.625,0.2)); +#93906 = LINE('',#93907,#93908); +#93907 = CARTESIAN_POINT('',(1.725,-0.625,0.2)); +#93908 = VECTOR('',#93909,1.); +#93909 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93910 = ORIENTED_EDGE('',*,*,#93911,.F.); +#93911 = EDGE_CURVE('',#93893,#93904,#93912,.T.); +#93912 = LINE('',#93913,#93914); +#93913 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#93914 = VECTOR('',#93915,1.); +#93915 = DIRECTION('',(0.,0.,1.)); +#93916 = PLANE('',#93917); +#93917 = AXIS2_PLACEMENT_3D('',#93918,#93919,#93920); +#93918 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93919 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93920 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93921 = ADVANCED_FACE('',(#93922),#93949,.F.); +#93922 = FACE_BOUND('',#93923,.F.); +#93923 = EDGE_LOOP('',(#93924,#93932,#93940,#93946,#93947,#93948)); +#93924 = ORIENTED_EDGE('',*,*,#93925,.F.); +#93925 = EDGE_CURVE('',#93926,#93870,#93928,.T.); +#93926 = VERTEX_POINT('',#93927); +#93927 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93928 = LINE('',#93929,#93930); +#93929 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93930 = VECTOR('',#93931,1.); +#93931 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93932 = ORIENTED_EDGE('',*,*,#93933,.T.); +#93933 = EDGE_CURVE('',#93926,#93934,#93936,.T.); +#93934 = VERTEX_POINT('',#93935); +#93935 = CARTESIAN_POINT('',(0.125,-2.5,0.2)); +#93936 = LINE('',#93937,#93938); +#93937 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93938 = VECTOR('',#93939,1.); +#93939 = DIRECTION('',(0.,0.,1.)); +#93940 = ORIENTED_EDGE('',*,*,#93941,.T.); +#93941 = EDGE_CURVE('',#93934,#93301,#93942,.T.); +#93942 = LINE('',#93943,#93944); +#93943 = CARTESIAN_POINT('',(0.125,-2.5,0.2)); +#93944 = VECTOR('',#93945,1.); +#93945 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93946 = ORIENTED_EDGE('',*,*,#93308,.T.); +#93947 = ORIENTED_EDGE('',*,*,#90938,.F.); +#93948 = ORIENTED_EDGE('',*,*,#93869,.F.); +#93949 = PLANE('',#93950); +#93950 = AXIS2_PLACEMENT_3D('',#93951,#93952,#93953); +#93951 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93952 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#93953 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93954 = ADVANCED_FACE('',(#93955),#93989,.F.); +#93955 = FACE_BOUND('',#93956,.F.); +#93956 = EDGE_LOOP('',(#93957,#93967,#93975,#93981,#93982,#93983)); +#93957 = ORIENTED_EDGE('',*,*,#93958,.F.); +#93958 = EDGE_CURVE('',#93959,#93961,#93963,.T.); +#93959 = VERTEX_POINT('',#93960); +#93960 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93961 = VERTEX_POINT('',#93962); +#93962 = CARTESIAN_POINT('',(1.725,-0.875,0.)); +#93963 = LINE('',#93964,#93965); +#93964 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93965 = VECTOR('',#93966,1.); +#93966 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93967 = ORIENTED_EDGE('',*,*,#93968,.T.); +#93968 = EDGE_CURVE('',#93959,#93969,#93971,.T.); +#93969 = VERTEX_POINT('',#93970); +#93970 = CARTESIAN_POINT('',(2.,-0.875,0.2)); +#93971 = LINE('',#93972,#93973); +#93972 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93973 = VECTOR('',#93974,1.); +#93974 = DIRECTION('',(0.,0.,1.)); +#93975 = ORIENTED_EDGE('',*,*,#93976,.T.); +#93976 = EDGE_CURVE('',#93969,#92710,#93977,.T.); +#93977 = LINE('',#93978,#93979); +#93978 = CARTESIAN_POINT('',(2.,-0.875,0.2)); +#93979 = VECTOR('',#93980,1.); +#93980 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93981 = ORIENTED_EDGE('',*,*,#92717,.T.); +#93982 = ORIENTED_EDGE('',*,*,#91078,.F.); +#93983 = ORIENTED_EDGE('',*,*,#93984,.F.); +#93984 = EDGE_CURVE('',#93961,#91070,#93985,.T.); +#93985 = LINE('',#93986,#93987); +#93986 = CARTESIAN_POINT('',(1.725,-0.875,0.)); +#93987 = VECTOR('',#93988,1.); +#93988 = DIRECTION('',(0.,0.,1.)); +#93989 = PLANE('',#93990); +#93990 = AXIS2_PLACEMENT_3D('',#93991,#93992,#93993); +#93991 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93992 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93993 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93994 = ADVANCED_FACE('',(#93995),#94029,.F.); +#93995 = FACE_BOUND('',#93996,.F.); +#93996 = EDGE_LOOP('',(#93997,#94007,#94013,#94014,#94015,#94023)); +#93997 = ORIENTED_EDGE('',*,*,#93998,.F.); +#93998 = EDGE_CURVE('',#93999,#94001,#94003,.T.); +#93999 = VERTEX_POINT('',#94000); +#94000 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94001 = VERTEX_POINT('',#94002); +#94002 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#94003 = LINE('',#94004,#94005); +#94004 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94005 = VECTOR('',#94006,1.); +#94006 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94007 = ORIENTED_EDGE('',*,*,#94008,.T.); +#94008 = EDGE_CURVE('',#93999,#90955,#94009,.T.); +#94009 = LINE('',#94010,#94011); +#94010 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94011 = VECTOR('',#94012,1.); +#94012 = DIRECTION('',(0.,0.,1.)); +#94013 = ORIENTED_EDGE('',*,*,#90954,.F.); +#94014 = ORIENTED_EDGE('',*,*,#93315,.T.); +#94015 = ORIENTED_EDGE('',*,*,#94016,.T.); +#94016 = EDGE_CURVE('',#93316,#94017,#94019,.T.); +#94017 = VERTEX_POINT('',#94018); +#94018 = CARTESIAN_POINT('',(0.375,-2.5,0.2)); +#94019 = LINE('',#94020,#94021); +#94020 = CARTESIAN_POINT('',(0.375,-2.225,0.2)); +#94021 = VECTOR('',#94022,1.); +#94022 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94023 = ORIENTED_EDGE('',*,*,#94024,.F.); +#94024 = EDGE_CURVE('',#94001,#94017,#94025,.T.); +#94025 = LINE('',#94026,#94027); +#94026 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#94027 = VECTOR('',#94028,1.); +#94028 = DIRECTION('',(0.,0.,1.)); +#94029 = PLANE('',#94030); +#94030 = AXIS2_PLACEMENT_3D('',#94031,#94032,#94033); +#94031 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94032 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94033 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94034 = ADVANCED_FACE('',(#94035),#94054,.T.); +#94035 = FACE_BOUND('',#94036,.T.); +#94036 = EDGE_LOOP('',(#94037,#94045,#94046,#94047)); +#94037 = ORIENTED_EDGE('',*,*,#94038,.T.); +#94038 = EDGE_CURVE('',#94039,#91062,#94041,.T.); +#94039 = VERTEX_POINT('',#94040); +#94040 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94041 = LINE('',#94042,#94043); +#94042 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94043 = VECTOR('',#94044,1.); +#94044 = DIRECTION('',(0.,0.,1.)); +#94045 = ORIENTED_EDGE('',*,*,#91069,.T.); +#94046 = ORIENTED_EDGE('',*,*,#93984,.F.); +#94047 = ORIENTED_EDGE('',*,*,#94048,.T.); +#94048 = EDGE_CURVE('',#93961,#94039,#94049,.T.); +#94049 = CIRCLE('',#94050,0.125); +#94050 = AXIS2_PLACEMENT_3D('',#94051,#94052,#94053); +#94051 = CARTESIAN_POINT('',(1.725,-1.,0.)); +#94052 = DIRECTION('',(0.,-0.,1.)); +#94053 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94054 = CYLINDRICAL_SURFACE('',#94055,0.125); +#94055 = AXIS2_PLACEMENT_3D('',#94056,#94057,#94058); +#94056 = CARTESIAN_POINT('',(1.725,-1.,0.)); +#94057 = DIRECTION('',(0.,-0.,-1.)); +#94058 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94059 = ADVANCED_FACE('',(#94060),#94079,.T.); +#94060 = FACE_BOUND('',#94061,.T.); +#94061 = EDGE_LOOP('',(#94062,#94063,#94064,#94072)); +#94062 = ORIENTED_EDGE('',*,*,#94008,.T.); +#94063 = ORIENTED_EDGE('',*,*,#90962,.T.); +#94064 = ORIENTED_EDGE('',*,*,#94065,.F.); +#94065 = EDGE_CURVE('',#94066,#90963,#94068,.T.); +#94066 = VERTEX_POINT('',#94067); +#94067 = CARTESIAN_POINT('',(0.625,-2.225,0.)); +#94068 = LINE('',#94069,#94070); +#94069 = CARTESIAN_POINT('',(0.625,-2.225,0.)); +#94070 = VECTOR('',#94071,1.); +#94071 = DIRECTION('',(0.,0.,1.)); +#94072 = ORIENTED_EDGE('',*,*,#94073,.T.); +#94073 = EDGE_CURVE('',#94066,#93999,#94074,.T.); +#94074 = CIRCLE('',#94075,0.125); +#94075 = AXIS2_PLACEMENT_3D('',#94076,#94077,#94078); +#94076 = CARTESIAN_POINT('',(0.5,-2.225,0.)); +#94077 = DIRECTION('',(-0.,0.,1.)); +#94078 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94079 = CYLINDRICAL_SURFACE('',#94080,0.125); +#94080 = AXIS2_PLACEMENT_3D('',#94081,#94082,#94083); +#94081 = CARTESIAN_POINT('',(0.5,-2.225,0.)); +#94082 = DIRECTION('',(-0.,0.,-1.)); +#94083 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#94084 = ADVANCED_FACE('',(#94085),#94112,.F.); +#94085 = FACE_BOUND('',#94086,.F.); +#94086 = EDGE_LOOP('',(#94087,#94095,#94096,#94097,#94098,#94106)); +#94087 = ORIENTED_EDGE('',*,*,#94088,.F.); +#94088 = EDGE_CURVE('',#94039,#94089,#94091,.T.); +#94089 = VERTEX_POINT('',#94090); +#94090 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#94091 = LINE('',#94092,#94093); +#94092 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94093 = VECTOR('',#94094,1.); +#94094 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94095 = ORIENTED_EDGE('',*,*,#94038,.T.); +#94096 = ORIENTED_EDGE('',*,*,#91061,.F.); +#94097 = ORIENTED_EDGE('',*,*,#92701,.T.); +#94098 = ORIENTED_EDGE('',*,*,#94099,.T.); +#94099 = EDGE_CURVE('',#92702,#94100,#94102,.T.); +#94100 = VERTEX_POINT('',#94101); +#94101 = CARTESIAN_POINT('',(2.,-1.125,0.2)); +#94102 = LINE('',#94103,#94104); +#94103 = CARTESIAN_POINT('',(1.725,-1.125,0.2)); +#94104 = VECTOR('',#94105,1.); +#94105 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94106 = ORIENTED_EDGE('',*,*,#94107,.F.); +#94107 = EDGE_CURVE('',#94089,#94100,#94108,.T.); +#94108 = LINE('',#94109,#94110); +#94109 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#94110 = VECTOR('',#94111,1.); +#94111 = DIRECTION('',(0.,0.,1.)); +#94112 = PLANE('',#94113); +#94113 = AXIS2_PLACEMENT_3D('',#94114,#94115,#94116); +#94114 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94115 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94116 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94117 = ADVANCED_FACE('',(#94118),#94145,.F.); +#94118 = FACE_BOUND('',#94119,.F.); +#94119 = EDGE_LOOP('',(#94120,#94128,#94136,#94142,#94143,#94144)); +#94120 = ORIENTED_EDGE('',*,*,#94121,.F.); +#94121 = EDGE_CURVE('',#94122,#94066,#94124,.T.); +#94122 = VERTEX_POINT('',#94123); +#94123 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94124 = LINE('',#94125,#94126); +#94125 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94126 = VECTOR('',#94127,1.); +#94127 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94128 = ORIENTED_EDGE('',*,*,#94129,.T.); +#94129 = EDGE_CURVE('',#94122,#94130,#94132,.T.); +#94130 = VERTEX_POINT('',#94131); +#94131 = CARTESIAN_POINT('',(0.625,-2.5,0.2)); +#94132 = LINE('',#94133,#94134); +#94133 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94134 = VECTOR('',#94135,1.); +#94135 = DIRECTION('',(0.,0.,1.)); +#94136 = ORIENTED_EDGE('',*,*,#94137,.T.); +#94137 = EDGE_CURVE('',#94130,#93324,#94138,.T.); +#94138 = LINE('',#94139,#94140); +#94139 = CARTESIAN_POINT('',(0.625,-2.5,0.2)); +#94140 = VECTOR('',#94141,1.); +#94141 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94142 = ORIENTED_EDGE('',*,*,#93331,.T.); +#94143 = ORIENTED_EDGE('',*,*,#90971,.F.); +#94144 = ORIENTED_EDGE('',*,*,#94065,.F.); +#94145 = PLANE('',#94146); +#94146 = AXIS2_PLACEMENT_3D('',#94147,#94148,#94149); +#94147 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94148 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#94149 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94150 = ADVANCED_FACE('',(#94151),#94185,.F.); +#94151 = FACE_BOUND('',#94152,.F.); +#94152 = EDGE_LOOP('',(#94153,#94163,#94171,#94177,#94178,#94179)); +#94153 = ORIENTED_EDGE('',*,*,#94154,.F.); +#94154 = EDGE_CURVE('',#94155,#94157,#94159,.T.); +#94155 = VERTEX_POINT('',#94156); +#94156 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94157 = VERTEX_POINT('',#94158); +#94158 = CARTESIAN_POINT('',(1.725,-1.375,0.)); +#94159 = LINE('',#94160,#94161); +#94160 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94161 = VECTOR('',#94162,1.); +#94162 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#94163 = ORIENTED_EDGE('',*,*,#94164,.T.); +#94164 = EDGE_CURVE('',#94155,#94165,#94167,.T.); +#94165 = VERTEX_POINT('',#94166); +#94166 = CARTESIAN_POINT('',(2.,-1.375,0.2)); +#94167 = LINE('',#94168,#94169); +#94168 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94169 = VECTOR('',#94170,1.); +#94170 = DIRECTION('',(0.,0.,1.)); +#94171 = ORIENTED_EDGE('',*,*,#94172,.T.); +#94172 = EDGE_CURVE('',#94165,#92687,#94173,.T.); +#94173 = LINE('',#94174,#94175); +#94174 = CARTESIAN_POINT('',(2.,-1.375,0.2)); +#94175 = VECTOR('',#94176,1.); +#94176 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#94177 = ORIENTED_EDGE('',*,*,#92694,.T.); +#94178 = ORIENTED_EDGE('',*,*,#91045,.F.); +#94179 = ORIENTED_EDGE('',*,*,#94180,.F.); +#94180 = EDGE_CURVE('',#94157,#91037,#94181,.T.); +#94181 = LINE('',#94182,#94183); +#94182 = CARTESIAN_POINT('',(1.725,-1.375,0.)); +#94183 = VECTOR('',#94184,1.); +#94184 = DIRECTION('',(0.,0.,1.)); +#94185 = PLANE('',#94186); +#94186 = AXIS2_PLACEMENT_3D('',#94187,#94188,#94189); +#94187 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94188 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#94189 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#94190 = ADVANCED_FACE('',(#94191),#94225,.F.); +#94191 = FACE_BOUND('',#94192,.F.); +#94192 = EDGE_LOOP('',(#94193,#94203,#94209,#94210,#94211,#94219)); +#94193 = ORIENTED_EDGE('',*,*,#94194,.F.); +#94194 = EDGE_CURVE('',#94195,#94197,#94199,.T.); +#94195 = VERTEX_POINT('',#94196); +#94196 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94197 = VERTEX_POINT('',#94198); +#94198 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#94199 = LINE('',#94200,#94201); +#94200 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94201 = VECTOR('',#94202,1.); +#94202 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94203 = ORIENTED_EDGE('',*,*,#94204,.T.); +#94204 = EDGE_CURVE('',#94195,#90988,#94205,.T.); +#94205 = LINE('',#94206,#94207); +#94206 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94207 = VECTOR('',#94208,1.); +#94208 = DIRECTION('',(0.,0.,1.)); +#94209 = ORIENTED_EDGE('',*,*,#90987,.F.); +#94210 = ORIENTED_EDGE('',*,*,#93338,.T.); +#94211 = ORIENTED_EDGE('',*,*,#94212,.T.); +#94212 = EDGE_CURVE('',#93339,#94213,#94215,.T.); +#94213 = VERTEX_POINT('',#94214); +#94214 = CARTESIAN_POINT('',(0.875,-2.5,0.2)); +#94215 = LINE('',#94216,#94217); +#94216 = CARTESIAN_POINT('',(0.875,-2.225,0.2)); +#94217 = VECTOR('',#94218,1.); +#94218 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94219 = ORIENTED_EDGE('',*,*,#94220,.F.); +#94220 = EDGE_CURVE('',#94197,#94213,#94221,.T.); +#94221 = LINE('',#94222,#94223); +#94222 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#94223 = VECTOR('',#94224,1.); +#94224 = DIRECTION('',(0.,0.,1.)); +#94225 = PLANE('',#94226); +#94226 = AXIS2_PLACEMENT_3D('',#94227,#94228,#94229); +#94227 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94228 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94229 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94230 = ADVANCED_FACE('',(#94231),#94250,.T.); +#94231 = FACE_BOUND('',#94232,.T.); +#94232 = EDGE_LOOP('',(#94233,#94241,#94242,#94243)); +#94233 = ORIENTED_EDGE('',*,*,#94234,.T.); +#94234 = EDGE_CURVE('',#94235,#91029,#94237,.T.); +#94235 = VERTEX_POINT('',#94236); +#94236 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94237 = LINE('',#94238,#94239); +#94238 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94239 = VECTOR('',#94240,1.); +#94240 = DIRECTION('',(0.,0.,1.)); +#94241 = ORIENTED_EDGE('',*,*,#91036,.T.); +#94242 = ORIENTED_EDGE('',*,*,#94180,.F.); +#94243 = ORIENTED_EDGE('',*,*,#94244,.T.); +#94244 = EDGE_CURVE('',#94157,#94235,#94245,.T.); +#94245 = CIRCLE('',#94246,0.125); +#94246 = AXIS2_PLACEMENT_3D('',#94247,#94248,#94249); +#94247 = CARTESIAN_POINT('',(1.725,-1.5,0.)); +#94248 = DIRECTION('',(0.,-0.,1.)); +#94249 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94250 = CYLINDRICAL_SURFACE('',#94251,0.125); +#94251 = AXIS2_PLACEMENT_3D('',#94252,#94253,#94254); +#94252 = CARTESIAN_POINT('',(1.725,-1.5,0.)); +#94253 = DIRECTION('',(0.,-0.,-1.)); +#94254 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94255 = ADVANCED_FACE('',(#94256),#94275,.T.); +#94256 = FACE_BOUND('',#94257,.T.); +#94257 = EDGE_LOOP('',(#94258,#94259,#94260,#94268)); +#94258 = ORIENTED_EDGE('',*,*,#94204,.T.); +#94259 = ORIENTED_EDGE('',*,*,#90995,.T.); +#94260 = ORIENTED_EDGE('',*,*,#94261,.F.); +#94261 = EDGE_CURVE('',#94262,#90996,#94264,.T.); +#94262 = VERTEX_POINT('',#94263); +#94263 = CARTESIAN_POINT('',(1.125,-2.225,0.)); +#94264 = LINE('',#94265,#94266); +#94265 = CARTESIAN_POINT('',(1.125,-2.225,0.)); +#94266 = VECTOR('',#94267,1.); +#94267 = DIRECTION('',(0.,0.,1.)); +#94268 = ORIENTED_EDGE('',*,*,#94269,.T.); +#94269 = EDGE_CURVE('',#94262,#94195,#94270,.T.); +#94270 = CIRCLE('',#94271,0.125); +#94271 = AXIS2_PLACEMENT_3D('',#94272,#94273,#94274); +#94272 = CARTESIAN_POINT('',(1.,-2.225,0.)); +#94273 = DIRECTION('',(-0.,0.,1.)); +#94274 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94275 = CYLINDRICAL_SURFACE('',#94276,0.125); +#94276 = AXIS2_PLACEMENT_3D('',#94277,#94278,#94279); +#94277 = CARTESIAN_POINT('',(1.,-2.225,0.)); +#94278 = DIRECTION('',(-0.,0.,-1.)); +#94279 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#94280 = ADVANCED_FACE('',(#94281),#94308,.F.); +#94281 = FACE_BOUND('',#94282,.F.); +#94282 = EDGE_LOOP('',(#94283,#94291,#94292,#94293,#94294,#94302)); +#94283 = ORIENTED_EDGE('',*,*,#94284,.F.); +#94284 = EDGE_CURVE('',#94235,#94285,#94287,.T.); +#94285 = VERTEX_POINT('',#94286); +#94286 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#94287 = LINE('',#94288,#94289); +#94288 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94289 = VECTOR('',#94290,1.); +#94290 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94291 = ORIENTED_EDGE('',*,*,#94234,.T.); +#94292 = ORIENTED_EDGE('',*,*,#91028,.F.); +#94293 = ORIENTED_EDGE('',*,*,#92678,.T.); +#94294 = ORIENTED_EDGE('',*,*,#94295,.T.); +#94295 = EDGE_CURVE('',#92679,#94296,#94298,.T.); +#94296 = VERTEX_POINT('',#94297); +#94297 = CARTESIAN_POINT('',(2.,-1.625,0.2)); +#94298 = LINE('',#94299,#94300); +#94299 = CARTESIAN_POINT('',(1.725,-1.625,0.2)); +#94300 = VECTOR('',#94301,1.); +#94301 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94302 = ORIENTED_EDGE('',*,*,#94303,.F.); +#94303 = EDGE_CURVE('',#94285,#94296,#94304,.T.); +#94304 = LINE('',#94305,#94306); +#94305 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#94306 = VECTOR('',#94307,1.); +#94307 = DIRECTION('',(0.,0.,1.)); +#94308 = PLANE('',#94309); +#94309 = AXIS2_PLACEMENT_3D('',#94310,#94311,#94312); +#94310 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94311 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94312 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94313 = ADVANCED_FACE('',(#94314),#94341,.F.); +#94314 = FACE_BOUND('',#94315,.F.); +#94315 = EDGE_LOOP('',(#94316,#94324,#94332,#94338,#94339,#94340)); +#94316 = ORIENTED_EDGE('',*,*,#94317,.F.); +#94317 = EDGE_CURVE('',#94318,#94262,#94320,.T.); +#94318 = VERTEX_POINT('',#94319); +#94319 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94320 = LINE('',#94321,#94322); +#94321 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94322 = VECTOR('',#94323,1.); +#94323 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94324 = ORIENTED_EDGE('',*,*,#94325,.T.); +#94325 = EDGE_CURVE('',#94318,#94326,#94328,.T.); +#94326 = VERTEX_POINT('',#94327); +#94327 = CARTESIAN_POINT('',(1.125,-2.5,0.2)); +#94328 = LINE('',#94329,#94330); +#94329 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94330 = VECTOR('',#94331,1.); +#94331 = DIRECTION('',(0.,0.,1.)); +#94332 = ORIENTED_EDGE('',*,*,#94333,.T.); +#94333 = EDGE_CURVE('',#94326,#93347,#94334,.T.); +#94334 = LINE('',#94335,#94336); +#94335 = CARTESIAN_POINT('',(1.125,-2.5,0.2)); +#94336 = VECTOR('',#94337,1.); +#94337 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94338 = ORIENTED_EDGE('',*,*,#93354,.T.); +#94339 = ORIENTED_EDGE('',*,*,#91004,.F.); +#94340 = ORIENTED_EDGE('',*,*,#94261,.F.); +#94341 = PLANE('',#94342); +#94342 = AXIS2_PLACEMENT_3D('',#94343,#94344,#94345); +#94343 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94344 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#94345 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94346 = ADVANCED_FACE('',(#94347),#94372,.F.); +#94347 = FACE_BOUND('',#94348,.F.); +#94348 = EDGE_LOOP('',(#94349,#94357,#94358,#94366)); +#94349 = ORIENTED_EDGE('',*,*,#94350,.T.); +#94350 = EDGE_CURVE('',#94351,#91403,#94353,.T.); +#94351 = VERTEX_POINT('',#94352); +#94352 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94353 = LINE('',#94354,#94355); +#94354 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94355 = VECTOR('',#94356,1.); +#94356 = DIRECTION('',(0.,0.,1.)); +#94357 = ORIENTED_EDGE('',*,*,#91402,.T.); +#94358 = ORIENTED_EDGE('',*,*,#94359,.F.); +#94359 = EDGE_CURVE('',#94360,#91405,#94362,.T.); +#94360 = VERTEX_POINT('',#94361); +#94361 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94362 = LINE('',#94363,#94364); +#94363 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94364 = VECTOR('',#94365,1.); +#94365 = DIRECTION('',(0.,0.,1.)); +#94366 = ORIENTED_EDGE('',*,*,#94367,.F.); +#94367 = EDGE_CURVE('',#94351,#94360,#94368,.T.); +#94368 = LINE('',#94369,#94370); +#94369 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94370 = VECTOR('',#94371,1.); +#94371 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94372 = PLANE('',#94373); +#94373 = AXIS2_PLACEMENT_3D('',#94374,#94375,#94376); +#94374 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94375 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#94376 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94377 = ADVANCED_FACE('',(#94378),#94396,.F.); +#94378 = FACE_BOUND('',#94379,.F.); +#94379 = EDGE_LOOP('',(#94380,#94381,#94382,#94390)); +#94380 = ORIENTED_EDGE('',*,*,#94359,.T.); +#94381 = ORIENTED_EDGE('',*,*,#91436,.T.); +#94382 = ORIENTED_EDGE('',*,*,#94383,.F.); +#94383 = EDGE_CURVE('',#94384,#91429,#94386,.T.); +#94384 = VERTEX_POINT('',#94385); +#94385 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94386 = LINE('',#94387,#94388); +#94387 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94388 = VECTOR('',#94389,1.); +#94389 = DIRECTION('',(0.,0.,1.)); +#94390 = ORIENTED_EDGE('',*,*,#94391,.F.); +#94391 = EDGE_CURVE('',#94360,#94384,#94392,.T.); +#94392 = LINE('',#94393,#94394); +#94393 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94394 = VECTOR('',#94395,1.); +#94395 = DIRECTION('',(1.,-1.382541879722E-16,0.)); +#94396 = PLANE('',#94397); +#94397 = AXIS2_PLACEMENT_3D('',#94398,#94399,#94400); +#94398 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94399 = DIRECTION('',(1.382541879722E-16,1.,0.)); +#94400 = DIRECTION('',(1.,-1.382541879722E-16,0.)); +#94401 = ADVANCED_FACE('',(#94402),#94420,.F.); +#94402 = FACE_BOUND('',#94403,.F.); +#94403 = EDGE_LOOP('',(#94404,#94405,#94406,#94414)); +#94404 = ORIENTED_EDGE('',*,*,#94383,.T.); +#94405 = ORIENTED_EDGE('',*,*,#91428,.T.); +#94406 = ORIENTED_EDGE('',*,*,#94407,.F.); +#94407 = EDGE_CURVE('',#94408,#91421,#94410,.T.); +#94408 = VERTEX_POINT('',#94409); +#94409 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94410 = LINE('',#94411,#94412); +#94411 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94412 = VECTOR('',#94413,1.); +#94413 = DIRECTION('',(0.,0.,1.)); +#94414 = ORIENTED_EDGE('',*,*,#94415,.F.); +#94415 = EDGE_CURVE('',#94384,#94408,#94416,.T.); +#94416 = LINE('',#94417,#94418); +#94417 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94418 = VECTOR('',#94419,1.); +#94419 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#94420 = PLANE('',#94421); +#94421 = AXIS2_PLACEMENT_3D('',#94422,#94423,#94424); +#94422 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94423 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#94424 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#94425 = ADVANCED_FACE('',(#94426),#94444,.F.); +#94426 = FACE_BOUND('',#94427,.F.); +#94427 = EDGE_LOOP('',(#94428,#94429,#94430,#94438)); +#94428 = ORIENTED_EDGE('',*,*,#94407,.T.); +#94429 = ORIENTED_EDGE('',*,*,#91420,.T.); +#94430 = ORIENTED_EDGE('',*,*,#94431,.F.); +#94431 = EDGE_CURVE('',#94432,#91413,#94434,.T.); +#94432 = VERTEX_POINT('',#94433); +#94433 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94434 = LINE('',#94435,#94436); +#94435 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94436 = VECTOR('',#94437,1.); +#94437 = DIRECTION('',(0.,0.,1.)); +#94438 = ORIENTED_EDGE('',*,*,#94439,.F.); +#94439 = EDGE_CURVE('',#94408,#94432,#94440,.T.); +#94440 = LINE('',#94441,#94442); +#94441 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94442 = VECTOR('',#94443,1.); +#94443 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#94444 = PLANE('',#94445); +#94445 = AXIS2_PLACEMENT_3D('',#94446,#94447,#94448); +#94446 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94447 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94448 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#94449 = ADVANCED_FACE('',(#94450),#94461,.F.); +#94450 = FACE_BOUND('',#94451,.F.); +#94451 = EDGE_LOOP('',(#94452,#94453,#94454,#94455)); +#94452 = ORIENTED_EDGE('',*,*,#94431,.T.); +#94453 = ORIENTED_EDGE('',*,*,#91412,.T.); +#94454 = ORIENTED_EDGE('',*,*,#94350,.F.); +#94455 = ORIENTED_EDGE('',*,*,#94456,.F.); +#94456 = EDGE_CURVE('',#94432,#94351,#94457,.T.); +#94457 = LINE('',#94458,#94459); +#94458 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94459 = VECTOR('',#94460,1.); +#94460 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#94461 = PLANE('',#94462); +#94462 = AXIS2_PLACEMENT_3D('',#94463,#94464,#94465); +#94463 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94464 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#94465 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#94466 = ADVANCED_FACE('',(#94467,#94473),#94484,.T.); +#94467 = FACE_BOUND('',#94468,.T.); +#94468 = EDGE_LOOP('',(#94469,#94470,#94471,#94472)); +#94469 = ORIENTED_EDGE('',*,*,#91450,.F.); +#94470 = ORIENTED_EDGE('',*,*,#91596,.T.); +#94471 = ORIENTED_EDGE('',*,*,#93238,.T.); +#94472 = ORIENTED_EDGE('',*,*,#92663,.F.); +#94473 = FACE_BOUND('',#94474,.T.); +#94474 = EDGE_LOOP('',(#94475)); +#94475 = ORIENTED_EDGE('',*,*,#94476,.T.); +#94476 = EDGE_CURVE('',#94477,#94477,#94479,.T.); +#94477 = VERTEX_POINT('',#94478); +#94478 = CARTESIAN_POINT('',(-1.4,1.65,0.77)); +#94479 = CIRCLE('',#94480,0.25); +#94480 = AXIS2_PLACEMENT_3D('',#94481,#94482,#94483); +#94481 = CARTESIAN_POINT('',(-1.4,1.9,0.77)); +#94482 = DIRECTION('',(-0.,0.,-1.)); +#94483 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94484 = PLANE('',#94485); +#94485 = AXIS2_PLACEMENT_3D('',#94486,#94487,#94488); +#94486 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#94487 = DIRECTION('',(0.,0.,1.)); +#94488 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94489 = ADVANCED_FACE('',(#94490),#94501,.F.); +#94490 = FACE_BOUND('',#94491,.F.); +#94491 = EDGE_LOOP('',(#94492,#94493,#94499,#94500)); +#94492 = ORIENTED_EDGE('',*,*,#92483,.F.); +#94493 = ORIENTED_EDGE('',*,*,#94494,.F.); +#94494 = EDGE_CURVE('',#92607,#92476,#94495,.T.); +#94495 = LINE('',#94496,#94497); +#94496 = CARTESIAN_POINT('',(1.125,2.5,0.2)); +#94497 = VECTOR('',#94498,1.); +#94498 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94499 = ORIENTED_EDGE('',*,*,#92606,.F.); +#94500 = ORIENTED_EDGE('',*,*,#91553,.F.); +#94501 = PLANE('',#94502); +#94502 = AXIS2_PLACEMENT_3D('',#94503,#94504,#94505); +#94503 = CARTESIAN_POINT('',(0.875,2.5,0.2)); +#94504 = DIRECTION('',(-0.,0.,-1.)); +#94505 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94506 = ADVANCED_FACE('',(#94507),#94518,.F.); +#94507 = FACE_BOUND('',#94508,.F.); +#94508 = EDGE_LOOP('',(#94509,#94510,#94516,#94517)); +#94509 = ORIENTED_EDGE('',*,*,#92287,.F.); +#94510 = ORIENTED_EDGE('',*,*,#94511,.F.); +#94511 = EDGE_CURVE('',#92411,#92280,#94512,.T.); +#94512 = LINE('',#94513,#94514); +#94513 = CARTESIAN_POINT('',(0.625,2.5,0.2)); +#94514 = VECTOR('',#94515,1.); +#94515 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94516 = ORIENTED_EDGE('',*,*,#92410,.F.); +#94517 = ORIENTED_EDGE('',*,*,#91530,.F.); +#94518 = PLANE('',#94519); +#94519 = AXIS2_PLACEMENT_3D('',#94520,#94521,#94522); +#94520 = CARTESIAN_POINT('',(0.375,2.5,0.2)); +#94521 = DIRECTION('',(-0.,0.,-1.)); +#94522 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94523 = ADVANCED_FACE('',(#94524),#94535,.F.); +#94524 = FACE_BOUND('',#94525,.F.); +#94525 = EDGE_LOOP('',(#94526,#94527,#94533,#94534)); +#94526 = ORIENTED_EDGE('',*,*,#91895,.F.); +#94527 = ORIENTED_EDGE('',*,*,#94528,.F.); +#94528 = EDGE_CURVE('',#92019,#91888,#94529,.T.); +#94529 = LINE('',#94530,#94531); +#94530 = CARTESIAN_POINT('',(-0.375,2.5,0.2)); +#94531 = VECTOR('',#94532,1.); +#94532 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94533 = ORIENTED_EDGE('',*,*,#92018,.F.); +#94534 = ORIENTED_EDGE('',*,*,#91484,.F.); +#94535 = PLANE('',#94536); +#94536 = AXIS2_PLACEMENT_3D('',#94537,#94538,#94539); +#94537 = CARTESIAN_POINT('',(-0.625,2.5,0.2)); +#94538 = DIRECTION('',(-0.,0.,-1.)); +#94539 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94540 = ADVANCED_FACE('',(#94541),#94552,.F.); +#94541 = FACE_BOUND('',#94542,.F.); +#94542 = EDGE_LOOP('',(#94543,#94544,#94550,#94551)); +#94543 = ORIENTED_EDGE('',*,*,#92091,.F.); +#94544 = ORIENTED_EDGE('',*,*,#94545,.F.); +#94545 = EDGE_CURVE('',#92215,#92084,#94546,.T.); +#94546 = LINE('',#94547,#94548); +#94547 = CARTESIAN_POINT('',(0.125,2.5,0.2)); +#94548 = VECTOR('',#94549,1.); +#94549 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94550 = ORIENTED_EDGE('',*,*,#92214,.F.); +#94551 = ORIENTED_EDGE('',*,*,#91507,.F.); +#94552 = PLANE('',#94553); +#94553 = AXIS2_PLACEMENT_3D('',#94554,#94555,#94556); +#94554 = CARTESIAN_POINT('',(-0.125,2.5,0.2)); +#94555 = DIRECTION('',(-0.,0.,-1.)); +#94556 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94557 = ADVANCED_FACE('',(#94558),#94569,.F.); +#94558 = FACE_BOUND('',#94559,.F.); +#94559 = EDGE_LOOP('',(#94560,#94561,#94567,#94568)); +#94560 = ORIENTED_EDGE('',*,*,#91860,.F.); +#94561 = ORIENTED_EDGE('',*,*,#94562,.F.); +#94562 = EDGE_CURVE('',#91798,#91853,#94563,.T.); +#94563 = LINE('',#94564,#94565); +#94564 = CARTESIAN_POINT('',(-2.,1.625,0.2)); +#94565 = VECTOR('',#94566,1.); +#94566 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94567 = ORIENTED_EDGE('',*,*,#91797,.F.); +#94568 = ORIENTED_EDGE('',*,*,#91757,.F.); +#94569 = PLANE('',#94570); +#94570 = AXIS2_PLACEMENT_3D('',#94571,#94572,#94573); +#94571 = CARTESIAN_POINT('',(-2.,1.375,0.2)); +#94572 = DIRECTION('',(0.,-0.,-1.)); +#94573 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94574 = ADVANCED_FACE('',(#94575),#94586,.F.); +#94575 = FACE_BOUND('',#94576,.F.); +#94576 = EDGE_LOOP('',(#94577,#94578,#94584,#94585)); +#94577 = ORIENTED_EDGE('',*,*,#93188,.F.); +#94578 = ORIENTED_EDGE('',*,*,#94579,.F.); +#94579 = EDGE_CURVE('',#93061,#93181,#94580,.T.); +#94580 = LINE('',#94581,#94582); +#94581 = CARTESIAN_POINT('',(-2.,-1.375,0.2)); +#94582 = VECTOR('',#94583,1.); +#94583 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94584 = ORIENTED_EDGE('',*,*,#93060,.F.); +#94585 = ORIENTED_EDGE('',*,*,#91619,.F.); +#94586 = PLANE('',#94587); +#94587 = AXIS2_PLACEMENT_3D('',#94588,#94589,#94590); +#94588 = CARTESIAN_POINT('',(-2.,-1.625,0.2)); +#94589 = DIRECTION('',(0.,-0.,-1.)); +#94590 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94591 = ADVANCED_FACE('',(#94592),#94603,.F.); +#94592 = FACE_BOUND('',#94593,.F.); +#94593 = EDGE_LOOP('',(#94594,#94595,#94601,#94602)); +#94594 = ORIENTED_EDGE('',*,*,#92056,.F.); +#94595 = ORIENTED_EDGE('',*,*,#94596,.F.); +#94596 = EDGE_CURVE('',#91936,#92049,#94597,.T.); +#94597 = LINE('',#94598,#94599); +#94598 = CARTESIAN_POINT('',(-2.,1.125,0.2)); +#94599 = VECTOR('',#94600,1.); +#94600 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94601 = ORIENTED_EDGE('',*,*,#91935,.F.); +#94602 = ORIENTED_EDGE('',*,*,#91734,.F.); +#94603 = PLANE('',#94604); +#94604 = AXIS2_PLACEMENT_3D('',#94605,#94606,#94607); +#94605 = CARTESIAN_POINT('',(-2.,0.875,0.2)); +#94606 = DIRECTION('',(0.,-0.,-1.)); +#94607 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94608 = ADVANCED_FACE('',(#94609),#94620,.F.); +#94609 = FACE_BOUND('',#94610,.F.); +#94610 = EDGE_LOOP('',(#94611,#94612,#94618,#94619)); +#94611 = ORIENTED_EDGE('',*,*,#92992,.F.); +#94612 = ORIENTED_EDGE('',*,*,#94613,.F.); +#94613 = EDGE_CURVE('',#92865,#92985,#94614,.T.); +#94614 = LINE('',#94615,#94616); +#94615 = CARTESIAN_POINT('',(-2.,-0.875,0.2)); +#94616 = VECTOR('',#94617,1.); +#94617 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94618 = ORIENTED_EDGE('',*,*,#92864,.F.); +#94619 = ORIENTED_EDGE('',*,*,#91642,.F.); +#94620 = PLANE('',#94621); +#94621 = AXIS2_PLACEMENT_3D('',#94622,#94623,#94624); +#94622 = CARTESIAN_POINT('',(-2.,-1.125,0.2)); +#94623 = DIRECTION('',(0.,-0.,-1.)); +#94624 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94625 = ADVANCED_FACE('',(#94626),#94637,.F.); +#94626 = FACE_BOUND('',#94627,.F.); +#94627 = EDGE_LOOP('',(#94628,#94629,#94635,#94636)); +#94628 = ORIENTED_EDGE('',*,*,#92252,.F.); +#94629 = ORIENTED_EDGE('',*,*,#94630,.F.); +#94630 = EDGE_CURVE('',#92132,#92245,#94631,.T.); +#94631 = LINE('',#94632,#94633); +#94632 = CARTESIAN_POINT('',(-2.,0.625,0.2)); +#94633 = VECTOR('',#94634,1.); +#94634 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94635 = ORIENTED_EDGE('',*,*,#92131,.F.); +#94636 = ORIENTED_EDGE('',*,*,#91711,.F.); +#94637 = PLANE('',#94638); +#94638 = AXIS2_PLACEMENT_3D('',#94639,#94640,#94641); +#94639 = CARTESIAN_POINT('',(-2.,0.375,0.2)); +#94640 = DIRECTION('',(0.,-0.,-1.)); +#94641 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94642 = ADVANCED_FACE('',(#94643),#94654,.F.); +#94643 = FACE_BOUND('',#94644,.F.); +#94644 = EDGE_LOOP('',(#94645,#94646,#94652,#94653)); +#94645 = ORIENTED_EDGE('',*,*,#92644,.F.); +#94646 = ORIENTED_EDGE('',*,*,#94647,.F.); +#94647 = EDGE_CURVE('',#92524,#92637,#94648,.T.); +#94648 = LINE('',#94649,#94650); +#94649 = CARTESIAN_POINT('',(-2.,-0.375,0.2)); +#94650 = VECTOR('',#94651,1.); +#94651 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94652 = ORIENTED_EDGE('',*,*,#92523,.F.); +#94653 = ORIENTED_EDGE('',*,*,#91665,.F.); +#94654 = PLANE('',#94655); +#94655 = AXIS2_PLACEMENT_3D('',#94656,#94657,#94658); +#94656 = CARTESIAN_POINT('',(-2.,-0.625,0.2)); +#94657 = DIRECTION('',(0.,-0.,-1.)); +#94658 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94659 = ADVANCED_FACE('',(#94660),#94671,.F.); +#94660 = FACE_BOUND('',#94661,.F.); +#94661 = EDGE_LOOP('',(#94662,#94663,#94669,#94670)); +#94662 = ORIENTED_EDGE('',*,*,#92448,.F.); +#94663 = ORIENTED_EDGE('',*,*,#94664,.F.); +#94664 = EDGE_CURVE('',#92328,#92441,#94665,.T.); +#94665 = LINE('',#94666,#94667); +#94666 = CARTESIAN_POINT('',(-2.,0.125,0.2)); +#94667 = VECTOR('',#94668,1.); +#94668 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94669 = ORIENTED_EDGE('',*,*,#92327,.F.); +#94670 = ORIENTED_EDGE('',*,*,#91688,.F.); +#94671 = PLANE('',#94672); +#94672 = AXIS2_PLACEMENT_3D('',#94673,#94674,#94675); +#94673 = CARTESIAN_POINT('',(-2.,-0.125,0.2)); +#94674 = DIRECTION('',(0.,-0.,-1.)); +#94675 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94676 = ADVANCED_FACE('',(#94677),#94688,.T.); +#94677 = FACE_BOUND('',#94678,.F.); +#94678 = EDGE_LOOP('',(#94679,#94680,#94681,#94682)); +#94679 = ORIENTED_EDGE('',*,*,#91844,.T.); +#94680 = ORIENTED_EDGE('',*,*,#91829,.T.); +#94681 = ORIENTED_EDGE('',*,*,#91779,.T.); +#94682 = ORIENTED_EDGE('',*,*,#94683,.T.); +#94683 = EDGE_CURVE('',#91782,#91845,#94684,.T.); +#94684 = LINE('',#94685,#94686); +#94685 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#94686 = VECTOR('',#94687,1.); +#94687 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94688 = PLANE('',#94689); +#94689 = AXIS2_PLACEMENT_3D('',#94690,#94691,#94692); +#94690 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#94691 = DIRECTION('',(0.,-0.,-1.)); +#94692 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94693 = ADVANCED_FACE('',(#94694),#94700,.F.); +#94694 = FACE_BOUND('',#94695,.F.); +#94695 = EDGE_LOOP('',(#94696,#94697,#94698,#94699)); +#94696 = ORIENTED_EDGE('',*,*,#91805,.T.); +#94697 = ORIENTED_EDGE('',*,*,#94562,.T.); +#94698 = ORIENTED_EDGE('',*,*,#91852,.F.); +#94699 = ORIENTED_EDGE('',*,*,#94683,.F.); +#94700 = PLANE('',#94701); +#94701 = AXIS2_PLACEMENT_3D('',#94702,#94703,#94704); +#94702 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#94703 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94704 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94705 = ADVANCED_FACE('',(#94706),#94717,.T.); +#94706 = FACE_BOUND('',#94707,.F.); +#94707 = EDGE_LOOP('',(#94708,#94709,#94710,#94711)); +#94708 = ORIENTED_EDGE('',*,*,#91877,.T.); +#94709 = ORIENTED_EDGE('',*,*,#91967,.T.); +#94710 = ORIENTED_EDGE('',*,*,#92007,.T.); +#94711 = ORIENTED_EDGE('',*,*,#94712,.T.); +#94712 = EDGE_CURVE('',#92008,#91878,#94713,.T.); +#94713 = LINE('',#94714,#94715); +#94714 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#94715 = VECTOR('',#94716,1.); +#94716 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94717 = PLANE('',#94718); +#94718 = AXIS2_PLACEMENT_3D('',#94719,#94720,#94721); +#94719 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#94720 = DIRECTION('',(-0.,0.,-1.)); +#94721 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94722 = ADVANCED_FACE('',(#94723),#94729,.F.); +#94723 = FACE_BOUND('',#94724,.F.); +#94724 = EDGE_LOOP('',(#94725,#94726,#94727,#94728)); +#94725 = ORIENTED_EDGE('',*,*,#92026,.T.); +#94726 = ORIENTED_EDGE('',*,*,#94528,.T.); +#94727 = ORIENTED_EDGE('',*,*,#91887,.F.); +#94728 = ORIENTED_EDGE('',*,*,#94712,.F.); +#94729 = PLANE('',#94730); +#94730 = AXIS2_PLACEMENT_3D('',#94731,#94732,#94733); +#94731 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#94732 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94733 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94734 = ADVANCED_FACE('',(#94735),#94746,.T.); +#94735 = FACE_BOUND('',#94736,.F.); +#94736 = EDGE_LOOP('',(#94737,#94738,#94739,#94740)); +#94737 = ORIENTED_EDGE('',*,*,#92040,.T.); +#94738 = ORIENTED_EDGE('',*,*,#91992,.T.); +#94739 = ORIENTED_EDGE('',*,*,#91917,.T.); +#94740 = ORIENTED_EDGE('',*,*,#94741,.T.); +#94741 = EDGE_CURVE('',#91920,#92041,#94742,.T.); +#94742 = LINE('',#94743,#94744); +#94743 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#94744 = VECTOR('',#94745,1.); +#94745 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94746 = PLANE('',#94747); +#94747 = AXIS2_PLACEMENT_3D('',#94748,#94749,#94750); +#94748 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#94749 = DIRECTION('',(0.,-0.,-1.)); +#94750 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94751 = ADVANCED_FACE('',(#94752),#94758,.F.); +#94752 = FACE_BOUND('',#94753,.F.); +#94753 = EDGE_LOOP('',(#94754,#94755,#94756,#94757)); +#94754 = ORIENTED_EDGE('',*,*,#91943,.T.); +#94755 = ORIENTED_EDGE('',*,*,#94596,.T.); +#94756 = ORIENTED_EDGE('',*,*,#92048,.F.); +#94757 = ORIENTED_EDGE('',*,*,#94741,.F.); +#94758 = PLANE('',#94759); +#94759 = AXIS2_PLACEMENT_3D('',#94760,#94761,#94762); +#94760 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#94761 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94762 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94763 = ADVANCED_FACE('',(#94764),#94775,.T.); +#94764 = FACE_BOUND('',#94765,.F.); +#94765 = EDGE_LOOP('',(#94766,#94767,#94768,#94769)); +#94766 = ORIENTED_EDGE('',*,*,#92073,.T.); +#94767 = ORIENTED_EDGE('',*,*,#92163,.T.); +#94768 = ORIENTED_EDGE('',*,*,#92203,.T.); +#94769 = ORIENTED_EDGE('',*,*,#94770,.T.); +#94770 = EDGE_CURVE('',#92204,#92074,#94771,.T.); +#94771 = LINE('',#94772,#94773); +#94772 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#94773 = VECTOR('',#94774,1.); +#94774 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94775 = PLANE('',#94776); +#94776 = AXIS2_PLACEMENT_3D('',#94777,#94778,#94779); +#94777 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#94778 = DIRECTION('',(-0.,0.,-1.)); +#94779 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94780 = ADVANCED_FACE('',(#94781),#94787,.F.); +#94781 = FACE_BOUND('',#94782,.F.); +#94782 = EDGE_LOOP('',(#94783,#94784,#94785,#94786)); +#94783 = ORIENTED_EDGE('',*,*,#92222,.T.); +#94784 = ORIENTED_EDGE('',*,*,#94545,.T.); +#94785 = ORIENTED_EDGE('',*,*,#92083,.F.); +#94786 = ORIENTED_EDGE('',*,*,#94770,.F.); +#94787 = PLANE('',#94788); +#94788 = AXIS2_PLACEMENT_3D('',#94789,#94790,#94791); +#94789 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#94790 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94791 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94792 = ADVANCED_FACE('',(#94793),#94804,.T.); +#94793 = FACE_BOUND('',#94794,.F.); +#94794 = EDGE_LOOP('',(#94795,#94796,#94797,#94798)); +#94795 = ORIENTED_EDGE('',*,*,#92236,.T.); +#94796 = ORIENTED_EDGE('',*,*,#92188,.T.); +#94797 = ORIENTED_EDGE('',*,*,#92113,.T.); +#94798 = ORIENTED_EDGE('',*,*,#94799,.T.); +#94799 = EDGE_CURVE('',#92116,#92237,#94800,.T.); +#94800 = LINE('',#94801,#94802); +#94801 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#94802 = VECTOR('',#94803,1.); +#94803 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94804 = PLANE('',#94805); +#94805 = AXIS2_PLACEMENT_3D('',#94806,#94807,#94808); +#94806 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#94807 = DIRECTION('',(0.,-0.,-1.)); +#94808 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94809 = ADVANCED_FACE('',(#94810),#94816,.F.); +#94810 = FACE_BOUND('',#94811,.F.); +#94811 = EDGE_LOOP('',(#94812,#94813,#94814,#94815)); +#94812 = ORIENTED_EDGE('',*,*,#92139,.T.); +#94813 = ORIENTED_EDGE('',*,*,#94630,.T.); +#94814 = ORIENTED_EDGE('',*,*,#92244,.F.); +#94815 = ORIENTED_EDGE('',*,*,#94799,.F.); +#94816 = PLANE('',#94817); +#94817 = AXIS2_PLACEMENT_3D('',#94818,#94819,#94820); +#94818 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#94819 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94820 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94821 = ADVANCED_FACE('',(#94822),#94833,.T.); +#94822 = FACE_BOUND('',#94823,.F.); +#94823 = EDGE_LOOP('',(#94824,#94825,#94826,#94827)); +#94824 = ORIENTED_EDGE('',*,*,#92269,.T.); +#94825 = ORIENTED_EDGE('',*,*,#92359,.T.); +#94826 = ORIENTED_EDGE('',*,*,#92399,.T.); +#94827 = ORIENTED_EDGE('',*,*,#94828,.T.); +#94828 = EDGE_CURVE('',#92400,#92270,#94829,.T.); +#94829 = LINE('',#94830,#94831); +#94830 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#94831 = VECTOR('',#94832,1.); +#94832 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94833 = PLANE('',#94834); +#94834 = AXIS2_PLACEMENT_3D('',#94835,#94836,#94837); +#94835 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#94836 = DIRECTION('',(-0.,0.,-1.)); +#94837 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94838 = ADVANCED_FACE('',(#94839),#94845,.F.); +#94839 = FACE_BOUND('',#94840,.F.); +#94840 = EDGE_LOOP('',(#94841,#94842,#94843,#94844)); +#94841 = ORIENTED_EDGE('',*,*,#92418,.T.); +#94842 = ORIENTED_EDGE('',*,*,#94511,.T.); +#94843 = ORIENTED_EDGE('',*,*,#92279,.F.); +#94844 = ORIENTED_EDGE('',*,*,#94828,.F.); +#94845 = PLANE('',#94846); +#94846 = AXIS2_PLACEMENT_3D('',#94847,#94848,#94849); +#94847 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#94848 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94849 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94850 = ADVANCED_FACE('',(#94851),#94862,.T.); +#94851 = FACE_BOUND('',#94852,.F.); +#94852 = EDGE_LOOP('',(#94853,#94854,#94855,#94856)); +#94853 = ORIENTED_EDGE('',*,*,#92432,.T.); +#94854 = ORIENTED_EDGE('',*,*,#92384,.T.); +#94855 = ORIENTED_EDGE('',*,*,#92309,.T.); +#94856 = ORIENTED_EDGE('',*,*,#94857,.T.); +#94857 = EDGE_CURVE('',#92312,#92433,#94858,.T.); +#94858 = LINE('',#94859,#94860); +#94859 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#94860 = VECTOR('',#94861,1.); +#94861 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94862 = PLANE('',#94863); +#94863 = AXIS2_PLACEMENT_3D('',#94864,#94865,#94866); +#94864 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#94865 = DIRECTION('',(0.,-0.,-1.)); +#94866 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94867 = ADVANCED_FACE('',(#94868),#94874,.F.); +#94868 = FACE_BOUND('',#94869,.F.); +#94869 = EDGE_LOOP('',(#94870,#94871,#94872,#94873)); +#94870 = ORIENTED_EDGE('',*,*,#92335,.T.); +#94871 = ORIENTED_EDGE('',*,*,#94664,.T.); +#94872 = ORIENTED_EDGE('',*,*,#92440,.F.); +#94873 = ORIENTED_EDGE('',*,*,#94857,.F.); +#94874 = PLANE('',#94875); +#94875 = AXIS2_PLACEMENT_3D('',#94876,#94877,#94878); +#94876 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#94877 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94878 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94879 = ADVANCED_FACE('',(#94880),#94891,.T.); +#94880 = FACE_BOUND('',#94881,.F.); +#94881 = EDGE_LOOP('',(#94882,#94883,#94884,#94885)); +#94882 = ORIENTED_EDGE('',*,*,#92465,.T.); +#94883 = ORIENTED_EDGE('',*,*,#92555,.T.); +#94884 = ORIENTED_EDGE('',*,*,#92595,.T.); +#94885 = ORIENTED_EDGE('',*,*,#94886,.T.); +#94886 = EDGE_CURVE('',#92596,#92466,#94887,.T.); +#94887 = LINE('',#94888,#94889); +#94888 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#94889 = VECTOR('',#94890,1.); +#94890 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94891 = PLANE('',#94892); +#94892 = AXIS2_PLACEMENT_3D('',#94893,#94894,#94895); +#94893 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#94894 = DIRECTION('',(-0.,0.,-1.)); +#94895 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94896 = ADVANCED_FACE('',(#94897),#94903,.F.); +#94897 = FACE_BOUND('',#94898,.F.); +#94898 = EDGE_LOOP('',(#94899,#94900,#94901,#94902)); +#94899 = ORIENTED_EDGE('',*,*,#92614,.T.); +#94900 = ORIENTED_EDGE('',*,*,#94494,.T.); +#94901 = ORIENTED_EDGE('',*,*,#92475,.F.); +#94902 = ORIENTED_EDGE('',*,*,#94886,.F.); +#94903 = PLANE('',#94904); +#94904 = AXIS2_PLACEMENT_3D('',#94905,#94906,#94907); +#94905 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#94906 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94907 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94908 = ADVANCED_FACE('',(#94909),#94920,.T.); +#94909 = FACE_BOUND('',#94910,.F.); +#94910 = EDGE_LOOP('',(#94911,#94912,#94913,#94914)); +#94911 = ORIENTED_EDGE('',*,*,#92628,.T.); +#94912 = ORIENTED_EDGE('',*,*,#92580,.T.); +#94913 = ORIENTED_EDGE('',*,*,#92505,.T.); +#94914 = ORIENTED_EDGE('',*,*,#94915,.T.); +#94915 = EDGE_CURVE('',#92508,#92629,#94916,.T.); +#94916 = LINE('',#94917,#94918); +#94917 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#94918 = VECTOR('',#94919,1.); +#94919 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94920 = PLANE('',#94921); +#94921 = AXIS2_PLACEMENT_3D('',#94922,#94923,#94924); +#94922 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#94923 = DIRECTION('',(0.,-0.,-1.)); +#94924 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94925 = ADVANCED_FACE('',(#94926),#94932,.F.); +#94926 = FACE_BOUND('',#94927,.F.); +#94927 = EDGE_LOOP('',(#94928,#94929,#94930,#94931)); +#94928 = ORIENTED_EDGE('',*,*,#92531,.T.); +#94929 = ORIENTED_EDGE('',*,*,#94647,.T.); +#94930 = ORIENTED_EDGE('',*,*,#92636,.F.); +#94931 = ORIENTED_EDGE('',*,*,#94915,.F.); +#94932 = PLANE('',#94933); +#94933 = AXIS2_PLACEMENT_3D('',#94934,#94935,#94936); +#94934 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#94935 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94936 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94937 = ADVANCED_FACE('',(#94938),#94949,.F.); +#94938 = FACE_BOUND('',#94939,.F.); +#94939 = EDGE_LOOP('',(#94940,#94941,#94947,#94948)); +#94940 = ORIENTED_EDGE('',*,*,#92904,.F.); +#94941 = ORIENTED_EDGE('',*,*,#94942,.F.); +#94942 = EDGE_CURVE('',#93021,#92897,#94943,.T.); +#94943 = LINE('',#94944,#94945); +#94944 = CARTESIAN_POINT('',(2.,1.375,0.2)); +#94945 = VECTOR('',#94946,1.); +#94946 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94947 = ORIENTED_EDGE('',*,*,#93020,.F.); +#94948 = ORIENTED_EDGE('',*,*,#92824,.T.); +#94949 = PLANE('',#94950); +#94950 = AXIS2_PLACEMENT_3D('',#94951,#94952,#94953); +#94951 = CARTESIAN_POINT('',(2.,1.625,0.2)); +#94952 = DIRECTION('',(0.,0.,-1.)); +#94953 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#94954 = ADVANCED_FACE('',(#94955),#94966,.F.); +#94955 = FACE_BOUND('',#94956,.F.); +#94956 = EDGE_LOOP('',(#94957,#94958,#94964,#94965)); +#94957 = ORIENTED_EDGE('',*,*,#94172,.F.); +#94958 = ORIENTED_EDGE('',*,*,#94959,.F.); +#94959 = EDGE_CURVE('',#94296,#94165,#94960,.T.); +#94960 = LINE('',#94961,#94962); +#94961 = CARTESIAN_POINT('',(2.,-1.625,0.2)); +#94962 = VECTOR('',#94963,1.); +#94963 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94964 = ORIENTED_EDGE('',*,*,#94295,.F.); +#94965 = ORIENTED_EDGE('',*,*,#92686,.T.); +#94966 = PLANE('',#94967); +#94967 = AXIS2_PLACEMENT_3D('',#94968,#94969,#94970); +#94968 = CARTESIAN_POINT('',(2.,-1.375,0.2)); +#94969 = DIRECTION('',(0.,0.,-1.)); +#94970 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#94971 = ADVANCED_FACE('',(#94972),#94983,.F.); +#94972 = FACE_BOUND('',#94973,.F.); +#94973 = EDGE_LOOP('',(#94974,#94975,#94981,#94982)); +#94974 = ORIENTED_EDGE('',*,*,#93100,.F.); +#94975 = ORIENTED_EDGE('',*,*,#94976,.F.); +#94976 = EDGE_CURVE('',#93217,#93093,#94977,.T.); +#94977 = LINE('',#94978,#94979); +#94978 = CARTESIAN_POINT('',(2.,0.875,0.2)); +#94979 = VECTOR('',#94980,1.); +#94980 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94981 = ORIENTED_EDGE('',*,*,#93216,.F.); +#94982 = ORIENTED_EDGE('',*,*,#92801,.T.); +#94983 = PLANE('',#94984); +#94984 = AXIS2_PLACEMENT_3D('',#94985,#94986,#94987); +#94985 = CARTESIAN_POINT('',(2.,1.125,0.2)); +#94986 = DIRECTION('',(0.,0.,-1.)); +#94987 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#94988 = ADVANCED_FACE('',(#94989),#95000,.F.); +#94989 = FACE_BOUND('',#94990,.F.); +#94990 = EDGE_LOOP('',(#94991,#94992,#94998,#94999)); +#94991 = ORIENTED_EDGE('',*,*,#93976,.F.); +#94992 = ORIENTED_EDGE('',*,*,#94993,.F.); +#94993 = EDGE_CURVE('',#94100,#93969,#94994,.T.); +#94994 = LINE('',#94995,#94996); +#94995 = CARTESIAN_POINT('',(2.,-1.125,0.2)); +#94996 = VECTOR('',#94997,1.); +#94997 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94998 = ORIENTED_EDGE('',*,*,#94099,.F.); +#94999 = ORIENTED_EDGE('',*,*,#92709,.T.); +#95000 = PLANE('',#95001); +#95001 = AXIS2_PLACEMENT_3D('',#95002,#95003,#95004); +#95002 = CARTESIAN_POINT('',(2.,-0.875,0.2)); +#95003 = DIRECTION('',(0.,0.,-1.)); +#95004 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95005 = ADVANCED_FACE('',(#95006),#95017,.F.); +#95006 = FACE_BOUND('',#95007,.F.); +#95007 = EDGE_LOOP('',(#95008,#95009,#95015,#95016)); +#95008 = ORIENTED_EDGE('',*,*,#93388,.F.); +#95009 = ORIENTED_EDGE('',*,*,#95010,.F.); +#95010 = EDGE_CURVE('',#93512,#93381,#95011,.T.); +#95011 = LINE('',#95012,#95013); +#95012 = CARTESIAN_POINT('',(2.,0.375,0.2)); +#95013 = VECTOR('',#95014,1.); +#95014 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95015 = ORIENTED_EDGE('',*,*,#93511,.F.); +#95016 = ORIENTED_EDGE('',*,*,#92778,.T.); +#95017 = PLANE('',#95018); +#95018 = AXIS2_PLACEMENT_3D('',#95019,#95020,#95021); +#95019 = CARTESIAN_POINT('',(2.,0.625,0.2)); +#95020 = DIRECTION('',(0.,0.,-1.)); +#95021 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95022 = ADVANCED_FACE('',(#95023),#95034,.F.); +#95023 = FACE_BOUND('',#95024,.F.); +#95024 = EDGE_LOOP('',(#95025,#95026,#95032,#95033)); +#95025 = ORIENTED_EDGE('',*,*,#93780,.F.); +#95026 = ORIENTED_EDGE('',*,*,#95027,.F.); +#95027 = EDGE_CURVE('',#93904,#93773,#95028,.T.); +#95028 = LINE('',#95029,#95030); +#95029 = CARTESIAN_POINT('',(2.,-0.625,0.2)); +#95030 = VECTOR('',#95031,1.); +#95031 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95032 = ORIENTED_EDGE('',*,*,#93903,.F.); +#95033 = ORIENTED_EDGE('',*,*,#92732,.T.); +#95034 = PLANE('',#95035); +#95035 = AXIS2_PLACEMENT_3D('',#95036,#95037,#95038); +#95036 = CARTESIAN_POINT('',(2.,-0.375,0.2)); +#95037 = DIRECTION('',(0.,0.,-1.)); +#95038 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95039 = ADVANCED_FACE('',(#95040),#95051,.F.); +#95040 = FACE_BOUND('',#95041,.F.); +#95041 = EDGE_LOOP('',(#95042,#95043,#95049,#95050)); +#95042 = ORIENTED_EDGE('',*,*,#93584,.F.); +#95043 = ORIENTED_EDGE('',*,*,#95044,.F.); +#95044 = EDGE_CURVE('',#93708,#93577,#95045,.T.); +#95045 = LINE('',#95046,#95047); +#95046 = CARTESIAN_POINT('',(2.,-0.125,0.2)); +#95047 = VECTOR('',#95048,1.); +#95048 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95049 = ORIENTED_EDGE('',*,*,#93707,.F.); +#95050 = ORIENTED_EDGE('',*,*,#92755,.T.); +#95051 = PLANE('',#95052); +#95052 = AXIS2_PLACEMENT_3D('',#95053,#95054,#95055); +#95053 = CARTESIAN_POINT('',(2.,0.125,0.2)); +#95054 = DIRECTION('',(0.,0.,-1.)); +#95055 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95056 = ADVANCED_FACE('',(#95057),#95068,.T.); +#95057 = FACE_BOUND('',#95058,.F.); +#95058 = EDGE_LOOP('',(#95059,#95060,#95061,#95062)); +#95059 = ORIENTED_EDGE('',*,*,#92976,.T.); +#95060 = ORIENTED_EDGE('',*,*,#92936,.T.); +#95061 = ORIENTED_EDGE('',*,*,#92846,.T.); +#95062 = ORIENTED_EDGE('',*,*,#95063,.T.); +#95063 = EDGE_CURVE('',#92849,#92977,#95064,.T.); +#95064 = LINE('',#95065,#95066); +#95065 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#95066 = VECTOR('',#95067,1.); +#95067 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95068 = PLANE('',#95069); +#95069 = AXIS2_PLACEMENT_3D('',#95070,#95071,#95072); +#95070 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#95071 = DIRECTION('',(0.,-0.,-1.)); +#95072 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#95073 = ADVANCED_FACE('',(#95074),#95080,.F.); +#95074 = FACE_BOUND('',#95075,.F.); +#95075 = EDGE_LOOP('',(#95076,#95077,#95078,#95079)); +#95076 = ORIENTED_EDGE('',*,*,#92872,.T.); +#95077 = ORIENTED_EDGE('',*,*,#94613,.T.); +#95078 = ORIENTED_EDGE('',*,*,#92984,.F.); +#95079 = ORIENTED_EDGE('',*,*,#95063,.F.); +#95080 = PLANE('',#95081); +#95081 = AXIS2_PLACEMENT_3D('',#95082,#95083,#95084); +#95082 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#95083 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#95084 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95085 = ADVANCED_FACE('',(#95086),#95097,.T.); +#95086 = FACE_BOUND('',#95087,.F.); +#95087 = EDGE_LOOP('',(#95088,#95089,#95090,#95091)); +#95088 = ORIENTED_EDGE('',*,*,#92886,.T.); +#95089 = ORIENTED_EDGE('',*,*,#92961,.T.); +#95090 = ORIENTED_EDGE('',*,*,#93009,.T.); +#95091 = ORIENTED_EDGE('',*,*,#95092,.T.); +#95092 = EDGE_CURVE('',#93010,#92887,#95093,.T.); +#95093 = LINE('',#95094,#95095); +#95094 = CARTESIAN_POINT('',(2.,1.375,0.)); +#95095 = VECTOR('',#95096,1.); +#95096 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95097 = PLANE('',#95098); +#95098 = AXIS2_PLACEMENT_3D('',#95099,#95100,#95101); +#95099 = CARTESIAN_POINT('',(2.,1.625,0.)); +#95100 = DIRECTION('',(0.,0.,-1.)); +#95101 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95102 = ADVANCED_FACE('',(#95103),#95109,.F.); +#95103 = FACE_BOUND('',#95104,.F.); +#95104 = EDGE_LOOP('',(#95105,#95106,#95107,#95108)); +#95105 = ORIENTED_EDGE('',*,*,#93028,.T.); +#95106 = ORIENTED_EDGE('',*,*,#94942,.T.); +#95107 = ORIENTED_EDGE('',*,*,#92896,.F.); +#95108 = ORIENTED_EDGE('',*,*,#95092,.F.); +#95109 = PLANE('',#95110); +#95110 = AXIS2_PLACEMENT_3D('',#95111,#95112,#95113); +#95111 = CARTESIAN_POINT('',(2.,1.375,0.)); +#95112 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95113 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95114 = ADVANCED_FACE('',(#95115),#95126,.T.); +#95115 = FACE_BOUND('',#95116,.F.); +#95116 = EDGE_LOOP('',(#95117,#95118,#95119,#95120)); +#95117 = ORIENTED_EDGE('',*,*,#93172,.T.); +#95118 = ORIENTED_EDGE('',*,*,#93132,.T.); +#95119 = ORIENTED_EDGE('',*,*,#93042,.T.); +#95120 = ORIENTED_EDGE('',*,*,#95121,.T.); +#95121 = EDGE_CURVE('',#93045,#93173,#95122,.T.); +#95122 = LINE('',#95123,#95124); +#95123 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#95124 = VECTOR('',#95125,1.); +#95125 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95126 = PLANE('',#95127); +#95127 = AXIS2_PLACEMENT_3D('',#95128,#95129,#95130); +#95128 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#95129 = DIRECTION('',(0.,-0.,-1.)); +#95130 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#95131 = ADVANCED_FACE('',(#95132),#95138,.F.); +#95132 = FACE_BOUND('',#95133,.F.); +#95133 = EDGE_LOOP('',(#95134,#95135,#95136,#95137)); +#95134 = ORIENTED_EDGE('',*,*,#93068,.T.); +#95135 = ORIENTED_EDGE('',*,*,#94579,.T.); +#95136 = ORIENTED_EDGE('',*,*,#93180,.F.); +#95137 = ORIENTED_EDGE('',*,*,#95121,.F.); +#95138 = PLANE('',#95139); +#95139 = AXIS2_PLACEMENT_3D('',#95140,#95141,#95142); +#95140 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#95141 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#95142 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95143 = ADVANCED_FACE('',(#95144),#95155,.T.); +#95144 = FACE_BOUND('',#95145,.F.); +#95145 = EDGE_LOOP('',(#95146,#95147,#95148,#95149)); +#95146 = ORIENTED_EDGE('',*,*,#93082,.T.); +#95147 = ORIENTED_EDGE('',*,*,#93157,.T.); +#95148 = ORIENTED_EDGE('',*,*,#93205,.T.); +#95149 = ORIENTED_EDGE('',*,*,#95150,.T.); +#95150 = EDGE_CURVE('',#93206,#93083,#95151,.T.); +#95151 = LINE('',#95152,#95153); +#95152 = CARTESIAN_POINT('',(2.,0.875,0.)); +#95153 = VECTOR('',#95154,1.); +#95154 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95155 = PLANE('',#95156); +#95156 = AXIS2_PLACEMENT_3D('',#95157,#95158,#95159); +#95157 = CARTESIAN_POINT('',(2.,1.125,0.)); +#95158 = DIRECTION('',(0.,0.,-1.)); +#95159 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95160 = ADVANCED_FACE('',(#95161),#95167,.F.); +#95161 = FACE_BOUND('',#95162,.F.); +#95162 = EDGE_LOOP('',(#95163,#95164,#95165,#95166)); +#95163 = ORIENTED_EDGE('',*,*,#93224,.T.); +#95164 = ORIENTED_EDGE('',*,*,#94976,.T.); +#95165 = ORIENTED_EDGE('',*,*,#93092,.F.); +#95166 = ORIENTED_EDGE('',*,*,#95150,.F.); +#95167 = PLANE('',#95168); +#95168 = AXIS2_PLACEMENT_3D('',#95169,#95170,#95171); +#95169 = CARTESIAN_POINT('',(2.,0.875,0.)); +#95170 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95171 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95172 = ADVANCED_FACE('',(#95173),#95184,.F.); +#95173 = FACE_BOUND('',#95174,.F.); +#95174 = EDGE_LOOP('',(#95175,#95176,#95182,#95183)); +#95175 = ORIENTED_EDGE('',*,*,#94333,.F.); +#95176 = ORIENTED_EDGE('',*,*,#95177,.F.); +#95177 = EDGE_CURVE('',#94213,#94326,#95178,.T.); +#95178 = LINE('',#95179,#95180); +#95179 = CARTESIAN_POINT('',(0.875,-2.5,0.2)); +#95180 = VECTOR('',#95181,1.); +#95181 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95182 = ORIENTED_EDGE('',*,*,#94212,.F.); +#95183 = ORIENTED_EDGE('',*,*,#93346,.T.); +#95184 = PLANE('',#95185); +#95185 = AXIS2_PLACEMENT_3D('',#95186,#95187,#95188); +#95186 = CARTESIAN_POINT('',(1.125,-2.5,0.2)); +#95187 = DIRECTION('',(0.,0.,-1.)); +#95188 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95189 = ADVANCED_FACE('',(#95190),#95201,.F.); +#95190 = FACE_BOUND('',#95191,.F.); +#95191 = EDGE_LOOP('',(#95192,#95193,#95199,#95200)); +#95192 = ORIENTED_EDGE('',*,*,#93549,.F.); +#95193 = ORIENTED_EDGE('',*,*,#95194,.F.); +#95194 = EDGE_CURVE('',#93429,#93542,#95195,.T.); +#95195 = LINE('',#95196,#95197); +#95196 = CARTESIAN_POINT('',(-1.125,-2.5,0.2)); +#95197 = VECTOR('',#95198,1.); +#95198 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95199 = ORIENTED_EDGE('',*,*,#93428,.F.); +#95200 = ORIENTED_EDGE('',*,*,#93254,.T.); +#95201 = PLANE('',#95202); +#95202 = AXIS2_PLACEMENT_3D('',#95203,#95204,#95205); +#95203 = CARTESIAN_POINT('',(-0.875,-2.5,0.2)); +#95204 = DIRECTION('',(0.,0.,-1.)); +#95205 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95206 = ADVANCED_FACE('',(#95207),#95218,.F.); +#95207 = FACE_BOUND('',#95208,.F.); +#95208 = EDGE_LOOP('',(#95209,#95210,#95216,#95217)); +#95209 = ORIENTED_EDGE('',*,*,#94137,.F.); +#95210 = ORIENTED_EDGE('',*,*,#95211,.F.); +#95211 = EDGE_CURVE('',#94017,#94130,#95212,.T.); +#95212 = LINE('',#95213,#95214); +#95213 = CARTESIAN_POINT('',(0.375,-2.5,0.2)); +#95214 = VECTOR('',#95215,1.); +#95215 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95216 = ORIENTED_EDGE('',*,*,#94016,.F.); +#95217 = ORIENTED_EDGE('',*,*,#93323,.T.); +#95218 = PLANE('',#95219); +#95219 = AXIS2_PLACEMENT_3D('',#95220,#95221,#95222); +#95220 = CARTESIAN_POINT('',(0.625,-2.5,0.2)); +#95221 = DIRECTION('',(0.,0.,-1.)); +#95222 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95223 = ADVANCED_FACE('',(#95224),#95235,.F.); +#95224 = FACE_BOUND('',#95225,.F.); +#95225 = EDGE_LOOP('',(#95226,#95227,#95233,#95234)); +#95226 = ORIENTED_EDGE('',*,*,#93745,.F.); +#95227 = ORIENTED_EDGE('',*,*,#95228,.F.); +#95228 = EDGE_CURVE('',#93625,#93738,#95229,.T.); +#95229 = LINE('',#95230,#95231); +#95230 = CARTESIAN_POINT('',(-0.625,-2.5,0.2)); +#95231 = VECTOR('',#95232,1.); +#95232 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95233 = ORIENTED_EDGE('',*,*,#93624,.F.); +#95234 = ORIENTED_EDGE('',*,*,#93277,.T.); +#95235 = PLANE('',#95236); +#95236 = AXIS2_PLACEMENT_3D('',#95237,#95238,#95239); +#95237 = CARTESIAN_POINT('',(-0.375,-2.5,0.2)); +#95238 = DIRECTION('',(0.,0.,-1.)); +#95239 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95240 = ADVANCED_FACE('',(#95241),#95252,.F.); +#95241 = FACE_BOUND('',#95242,.F.); +#95242 = EDGE_LOOP('',(#95243,#95244,#95250,#95251)); +#95243 = ORIENTED_EDGE('',*,*,#93941,.F.); +#95244 = ORIENTED_EDGE('',*,*,#95245,.F.); +#95245 = EDGE_CURVE('',#93821,#93934,#95246,.T.); +#95246 = LINE('',#95247,#95248); +#95247 = CARTESIAN_POINT('',(-0.125,-2.5,0.2)); +#95248 = VECTOR('',#95249,1.); +#95249 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95250 = ORIENTED_EDGE('',*,*,#93820,.F.); +#95251 = ORIENTED_EDGE('',*,*,#93300,.T.); +#95252 = PLANE('',#95253); +#95253 = AXIS2_PLACEMENT_3D('',#95254,#95255,#95256); +#95254 = CARTESIAN_POINT('',(0.125,-2.5,0.2)); +#95255 = DIRECTION('',(0.,0.,-1.)); +#95256 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95257 = ADVANCED_FACE('',(#95258),#95269,.T.); +#95258 = FACE_BOUND('',#95259,.F.); +#95259 = EDGE_LOOP('',(#95260,#95261,#95262,#95263)); +#95260 = ORIENTED_EDGE('',*,*,#93370,.T.); +#95261 = ORIENTED_EDGE('',*,*,#93460,.T.); +#95262 = ORIENTED_EDGE('',*,*,#93500,.T.); +#95263 = ORIENTED_EDGE('',*,*,#95264,.T.); +#95264 = EDGE_CURVE('',#93501,#93371,#95265,.T.); +#95265 = LINE('',#95266,#95267); +#95266 = CARTESIAN_POINT('',(2.,0.375,0.)); +#95267 = VECTOR('',#95268,1.); +#95268 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95269 = PLANE('',#95270); +#95270 = AXIS2_PLACEMENT_3D('',#95271,#95272,#95273); +#95271 = CARTESIAN_POINT('',(2.,0.625,0.)); +#95272 = DIRECTION('',(0.,0.,-1.)); +#95273 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95274 = ADVANCED_FACE('',(#95275),#95281,.F.); +#95275 = FACE_BOUND('',#95276,.F.); +#95276 = EDGE_LOOP('',(#95277,#95278,#95279,#95280)); +#95277 = ORIENTED_EDGE('',*,*,#93519,.T.); +#95278 = ORIENTED_EDGE('',*,*,#95010,.T.); +#95279 = ORIENTED_EDGE('',*,*,#93380,.F.); +#95280 = ORIENTED_EDGE('',*,*,#95264,.F.); +#95281 = PLANE('',#95282); +#95282 = AXIS2_PLACEMENT_3D('',#95283,#95284,#95285); +#95283 = CARTESIAN_POINT('',(2.,0.375,0.)); +#95284 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95285 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95286 = ADVANCED_FACE('',(#95287),#95298,.T.); +#95287 = FACE_BOUND('',#95288,.F.); +#95288 = EDGE_LOOP('',(#95289,#95290,#95291,#95292)); +#95289 = ORIENTED_EDGE('',*,*,#93533,.T.); +#95290 = ORIENTED_EDGE('',*,*,#93485,.T.); +#95291 = ORIENTED_EDGE('',*,*,#93410,.T.); +#95292 = ORIENTED_EDGE('',*,*,#95293,.T.); +#95293 = EDGE_CURVE('',#93413,#93534,#95294,.T.); +#95294 = LINE('',#95295,#95296); +#95295 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#95296 = VECTOR('',#95297,1.); +#95297 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95298 = PLANE('',#95299); +#95299 = AXIS2_PLACEMENT_3D('',#95300,#95301,#95302); +#95300 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#95301 = DIRECTION('',(0.,0.,-1.)); +#95302 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95303 = ADVANCED_FACE('',(#95304),#95310,.F.); +#95304 = FACE_BOUND('',#95305,.F.); +#95305 = EDGE_LOOP('',(#95306,#95307,#95308,#95309)); +#95306 = ORIENTED_EDGE('',*,*,#93436,.T.); +#95307 = ORIENTED_EDGE('',*,*,#95194,.T.); +#95308 = ORIENTED_EDGE('',*,*,#93541,.F.); +#95309 = ORIENTED_EDGE('',*,*,#95293,.F.); +#95310 = PLANE('',#95311); +#95311 = AXIS2_PLACEMENT_3D('',#95312,#95313,#95314); +#95312 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#95313 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95314 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95315 = ADVANCED_FACE('',(#95316),#95327,.T.); +#95316 = FACE_BOUND('',#95317,.F.); +#95317 = EDGE_LOOP('',(#95318,#95319,#95320,#95321)); +#95318 = ORIENTED_EDGE('',*,*,#93566,.T.); +#95319 = ORIENTED_EDGE('',*,*,#93656,.T.); +#95320 = ORIENTED_EDGE('',*,*,#93696,.T.); +#95321 = ORIENTED_EDGE('',*,*,#95322,.T.); +#95322 = EDGE_CURVE('',#93697,#93567,#95323,.T.); +#95323 = LINE('',#95324,#95325); +#95324 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#95325 = VECTOR('',#95326,1.); +#95326 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95327 = PLANE('',#95328); +#95328 = AXIS2_PLACEMENT_3D('',#95329,#95330,#95331); +#95329 = CARTESIAN_POINT('',(2.,0.125,0.)); +#95330 = DIRECTION('',(0.,0.,-1.)); +#95331 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95332 = ADVANCED_FACE('',(#95333),#95339,.F.); +#95333 = FACE_BOUND('',#95334,.F.); +#95334 = EDGE_LOOP('',(#95335,#95336,#95337,#95338)); +#95335 = ORIENTED_EDGE('',*,*,#93715,.T.); +#95336 = ORIENTED_EDGE('',*,*,#95044,.T.); +#95337 = ORIENTED_EDGE('',*,*,#93576,.F.); +#95338 = ORIENTED_EDGE('',*,*,#95322,.F.); +#95339 = PLANE('',#95340); +#95340 = AXIS2_PLACEMENT_3D('',#95341,#95342,#95343); +#95341 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#95342 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95343 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95344 = ADVANCED_FACE('',(#95345),#95356,.T.); +#95345 = FACE_BOUND('',#95346,.F.); +#95346 = EDGE_LOOP('',(#95347,#95348,#95349,#95350)); +#95347 = ORIENTED_EDGE('',*,*,#93729,.T.); +#95348 = ORIENTED_EDGE('',*,*,#93681,.T.); +#95349 = ORIENTED_EDGE('',*,*,#93606,.T.); +#95350 = ORIENTED_EDGE('',*,*,#95351,.T.); +#95351 = EDGE_CURVE('',#93609,#93730,#95352,.T.); +#95352 = LINE('',#95353,#95354); +#95353 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#95354 = VECTOR('',#95355,1.); +#95355 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95356 = PLANE('',#95357); +#95357 = AXIS2_PLACEMENT_3D('',#95358,#95359,#95360); +#95358 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#95359 = DIRECTION('',(0.,0.,-1.)); +#95360 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95361 = ADVANCED_FACE('',(#95362),#95368,.F.); +#95362 = FACE_BOUND('',#95363,.F.); +#95363 = EDGE_LOOP('',(#95364,#95365,#95366,#95367)); +#95364 = ORIENTED_EDGE('',*,*,#93632,.T.); +#95365 = ORIENTED_EDGE('',*,*,#95228,.T.); +#95366 = ORIENTED_EDGE('',*,*,#93737,.F.); +#95367 = ORIENTED_EDGE('',*,*,#95351,.F.); +#95368 = PLANE('',#95369); +#95369 = AXIS2_PLACEMENT_3D('',#95370,#95371,#95372); +#95370 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#95371 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95372 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95373 = ADVANCED_FACE('',(#95374),#95385,.T.); +#95374 = FACE_BOUND('',#95375,.F.); +#95375 = EDGE_LOOP('',(#95376,#95377,#95378,#95379)); +#95376 = ORIENTED_EDGE('',*,*,#93762,.T.); +#95377 = ORIENTED_EDGE('',*,*,#93852,.T.); +#95378 = ORIENTED_EDGE('',*,*,#93892,.T.); +#95379 = ORIENTED_EDGE('',*,*,#95380,.T.); +#95380 = EDGE_CURVE('',#93893,#93763,#95381,.T.); +#95381 = LINE('',#95382,#95383); +#95382 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#95383 = VECTOR('',#95384,1.); +#95384 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95385 = PLANE('',#95386); +#95386 = AXIS2_PLACEMENT_3D('',#95387,#95388,#95389); +#95387 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#95388 = DIRECTION('',(0.,0.,-1.)); +#95389 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95390 = ADVANCED_FACE('',(#95391),#95397,.F.); +#95391 = FACE_BOUND('',#95392,.F.); +#95392 = EDGE_LOOP('',(#95393,#95394,#95395,#95396)); +#95393 = ORIENTED_EDGE('',*,*,#93911,.T.); +#95394 = ORIENTED_EDGE('',*,*,#95027,.T.); +#95395 = ORIENTED_EDGE('',*,*,#93772,.F.); +#95396 = ORIENTED_EDGE('',*,*,#95380,.F.); +#95397 = PLANE('',#95398); +#95398 = AXIS2_PLACEMENT_3D('',#95399,#95400,#95401); +#95399 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#95400 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95401 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95402 = ADVANCED_FACE('',(#95403),#95414,.T.); +#95403 = FACE_BOUND('',#95404,.F.); +#95404 = EDGE_LOOP('',(#95405,#95406,#95407,#95408)); +#95405 = ORIENTED_EDGE('',*,*,#93925,.T.); +#95406 = ORIENTED_EDGE('',*,*,#93877,.T.); +#95407 = ORIENTED_EDGE('',*,*,#93802,.T.); +#95408 = ORIENTED_EDGE('',*,*,#95409,.T.); +#95409 = EDGE_CURVE('',#93805,#93926,#95410,.T.); +#95410 = LINE('',#95411,#95412); +#95411 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#95412 = VECTOR('',#95413,1.); +#95413 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95414 = PLANE('',#95415); +#95415 = AXIS2_PLACEMENT_3D('',#95416,#95417,#95418); +#95416 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#95417 = DIRECTION('',(0.,0.,-1.)); +#95418 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95419 = ADVANCED_FACE('',(#95420),#95426,.F.); +#95420 = FACE_BOUND('',#95421,.F.); +#95421 = EDGE_LOOP('',(#95422,#95423,#95424,#95425)); +#95422 = ORIENTED_EDGE('',*,*,#93828,.T.); +#95423 = ORIENTED_EDGE('',*,*,#95245,.T.); +#95424 = ORIENTED_EDGE('',*,*,#93933,.F.); +#95425 = ORIENTED_EDGE('',*,*,#95409,.F.); +#95426 = PLANE('',#95427); +#95427 = AXIS2_PLACEMENT_3D('',#95428,#95429,#95430); +#95428 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#95429 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95430 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95431 = ADVANCED_FACE('',(#95432),#95443,.T.); +#95432 = FACE_BOUND('',#95433,.F.); +#95433 = EDGE_LOOP('',(#95434,#95435,#95436,#95437)); +#95434 = ORIENTED_EDGE('',*,*,#93958,.T.); +#95435 = ORIENTED_EDGE('',*,*,#94048,.T.); +#95436 = ORIENTED_EDGE('',*,*,#94088,.T.); +#95437 = ORIENTED_EDGE('',*,*,#95438,.T.); +#95438 = EDGE_CURVE('',#94089,#93959,#95439,.T.); +#95439 = LINE('',#95440,#95441); +#95440 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#95441 = VECTOR('',#95442,1.); +#95442 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95443 = PLANE('',#95444); +#95444 = AXIS2_PLACEMENT_3D('',#95445,#95446,#95447); +#95445 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#95446 = DIRECTION('',(0.,0.,-1.)); +#95447 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95448 = ADVANCED_FACE('',(#95449),#95455,.F.); +#95449 = FACE_BOUND('',#95450,.F.); +#95450 = EDGE_LOOP('',(#95451,#95452,#95453,#95454)); +#95451 = ORIENTED_EDGE('',*,*,#94107,.T.); +#95452 = ORIENTED_EDGE('',*,*,#94993,.T.); +#95453 = ORIENTED_EDGE('',*,*,#93968,.F.); +#95454 = ORIENTED_EDGE('',*,*,#95438,.F.); +#95455 = PLANE('',#95456); +#95456 = AXIS2_PLACEMENT_3D('',#95457,#95458,#95459); +#95457 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#95458 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95459 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95460 = ADVANCED_FACE('',(#95461),#95472,.T.); +#95461 = FACE_BOUND('',#95462,.F.); +#95462 = EDGE_LOOP('',(#95463,#95464,#95465,#95466)); +#95463 = ORIENTED_EDGE('',*,*,#94121,.T.); +#95464 = ORIENTED_EDGE('',*,*,#94073,.T.); +#95465 = ORIENTED_EDGE('',*,*,#93998,.T.); +#95466 = ORIENTED_EDGE('',*,*,#95467,.T.); +#95467 = EDGE_CURVE('',#94001,#94122,#95468,.T.); +#95468 = LINE('',#95469,#95470); +#95469 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#95470 = VECTOR('',#95471,1.); +#95471 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95472 = PLANE('',#95473); +#95473 = AXIS2_PLACEMENT_3D('',#95474,#95475,#95476); +#95474 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#95475 = DIRECTION('',(0.,0.,-1.)); +#95476 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95477 = ADVANCED_FACE('',(#95478),#95484,.F.); +#95478 = FACE_BOUND('',#95479,.F.); +#95479 = EDGE_LOOP('',(#95480,#95481,#95482,#95483)); +#95480 = ORIENTED_EDGE('',*,*,#94024,.T.); +#95481 = ORIENTED_EDGE('',*,*,#95211,.T.); +#95482 = ORIENTED_EDGE('',*,*,#94129,.F.); +#95483 = ORIENTED_EDGE('',*,*,#95467,.F.); +#95484 = PLANE('',#95485); +#95485 = AXIS2_PLACEMENT_3D('',#95486,#95487,#95488); +#95486 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#95487 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95488 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95489 = ADVANCED_FACE('',(#95490),#95501,.T.); +#95490 = FACE_BOUND('',#95491,.F.); +#95491 = EDGE_LOOP('',(#95492,#95493,#95494,#95495)); +#95492 = ORIENTED_EDGE('',*,*,#94154,.T.); +#95493 = ORIENTED_EDGE('',*,*,#94244,.T.); +#95494 = ORIENTED_EDGE('',*,*,#94284,.T.); +#95495 = ORIENTED_EDGE('',*,*,#95496,.T.); +#95496 = EDGE_CURVE('',#94285,#94155,#95497,.T.); +#95497 = LINE('',#95498,#95499); +#95498 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#95499 = VECTOR('',#95500,1.); +#95500 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95501 = PLANE('',#95502); +#95502 = AXIS2_PLACEMENT_3D('',#95503,#95504,#95505); +#95503 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#95504 = DIRECTION('',(0.,0.,-1.)); +#95505 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95506 = ADVANCED_FACE('',(#95507),#95513,.F.); +#95507 = FACE_BOUND('',#95508,.F.); +#95508 = EDGE_LOOP('',(#95509,#95510,#95511,#95512)); +#95509 = ORIENTED_EDGE('',*,*,#94303,.T.); +#95510 = ORIENTED_EDGE('',*,*,#94959,.T.); +#95511 = ORIENTED_EDGE('',*,*,#94164,.F.); +#95512 = ORIENTED_EDGE('',*,*,#95496,.F.); +#95513 = PLANE('',#95514); +#95514 = AXIS2_PLACEMENT_3D('',#95515,#95516,#95517); +#95515 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#95516 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95517 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95518 = ADVANCED_FACE('',(#95519),#95530,.T.); +#95519 = FACE_BOUND('',#95520,.F.); +#95520 = EDGE_LOOP('',(#95521,#95522,#95523,#95524)); +#95521 = ORIENTED_EDGE('',*,*,#94317,.T.); +#95522 = ORIENTED_EDGE('',*,*,#94269,.T.); +#95523 = ORIENTED_EDGE('',*,*,#94194,.T.); +#95524 = ORIENTED_EDGE('',*,*,#95525,.T.); +#95525 = EDGE_CURVE('',#94197,#94318,#95526,.T.); +#95526 = LINE('',#95527,#95528); +#95527 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#95528 = VECTOR('',#95529,1.); +#95529 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95530 = PLANE('',#95531); +#95531 = AXIS2_PLACEMENT_3D('',#95532,#95533,#95534); +#95532 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#95533 = DIRECTION('',(0.,0.,-1.)); +#95534 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95535 = ADVANCED_FACE('',(#95536),#95542,.F.); +#95536 = FACE_BOUND('',#95537,.F.); +#95537 = EDGE_LOOP('',(#95538,#95539,#95540,#95541)); +#95538 = ORIENTED_EDGE('',*,*,#94220,.T.); +#95539 = ORIENTED_EDGE('',*,*,#95177,.T.); +#95540 = ORIENTED_EDGE('',*,*,#94325,.F.); +#95541 = ORIENTED_EDGE('',*,*,#95525,.F.); +#95542 = PLANE('',#95543); +#95543 = AXIS2_PLACEMENT_3D('',#95544,#95545,#95546); +#95544 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#95545 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95546 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95547 = ADVANCED_FACE('',(#95548),#95555,.T.); +#95548 = FACE_BOUND('',#95549,.F.); +#95549 = EDGE_LOOP('',(#95550,#95551,#95552,#95553,#95554)); +#95550 = ORIENTED_EDGE('',*,*,#94367,.T.); +#95551 = ORIENTED_EDGE('',*,*,#94391,.T.); +#95552 = ORIENTED_EDGE('',*,*,#94415,.T.); +#95553 = ORIENTED_EDGE('',*,*,#94439,.T.); +#95554 = ORIENTED_EDGE('',*,*,#94456,.T.); +#95555 = PLANE('',#95556); +#95556 = AXIS2_PLACEMENT_3D('',#95557,#95558,#95559); +#95557 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#95558 = DIRECTION('',(0.,-0.,-1.)); +#95559 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#95560 = ADVANCED_FACE('',(#95561),#95580,.F.); +#95561 = FACE_BOUND('',#95562,.F.); +#95562 = EDGE_LOOP('',(#95563,#95571,#95578,#95579)); +#95563 = ORIENTED_EDGE('',*,*,#95564,.T.); +#95564 = EDGE_CURVE('',#94477,#95565,#95567,.T.); +#95565 = VERTEX_POINT('',#95566); +#95566 = CARTESIAN_POINT('',(-1.4,1.65,0.76)); +#95567 = LINE('',#95568,#95569); +#95568 = CARTESIAN_POINT('',(-1.4,1.65,0.78)); +#95569 = VECTOR('',#95570,1.); +#95570 = DIRECTION('',(-0.,0.,-1.)); +#95571 = ORIENTED_EDGE('',*,*,#95572,.T.); +#95572 = EDGE_CURVE('',#95565,#95565,#95573,.T.); +#95573 = CIRCLE('',#95574,0.25); +#95574 = AXIS2_PLACEMENT_3D('',#95575,#95576,#95577); +#95575 = CARTESIAN_POINT('',(-1.4,1.9,0.76)); +#95576 = DIRECTION('',(0.,0.,1.)); +#95577 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#95578 = ORIENTED_EDGE('',*,*,#95564,.F.); +#95579 = ORIENTED_EDGE('',*,*,#94476,.T.); +#95580 = CYLINDRICAL_SURFACE('',#95581,0.25); +#95581 = AXIS2_PLACEMENT_3D('',#95582,#95583,#95584); +#95582 = CARTESIAN_POINT('',(-1.4,1.9,0.78)); +#95583 = DIRECTION('',(0.,0.,-1.)); +#95584 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#95585 = ADVANCED_FACE('',(#95586),#95589,.T.); +#95586 = FACE_BOUND('',#95587,.T.); +#95587 = EDGE_LOOP('',(#95588)); +#95588 = ORIENTED_EDGE('',*,*,#95572,.T.); +#95589 = PLANE('',#95590); +#95590 = AXIS2_PLACEMENT_3D('',#95591,#95592,#95593); +#95591 = CARTESIAN_POINT('',(-1.4,1.9,0.76)); +#95592 = DIRECTION('',(0.,0.,1.)); +#95593 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#95594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95598)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95595,#95596,#95597)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95595 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95596 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95597 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95598 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95595, + 'distance_accuracy_value','confusion accuracy'); +#95599 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95600,#95602); +#95600 = ( REPRESENTATION_RELATIONSHIP('','',#90423,#90400) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95601) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95601 = ITEM_DEFINED_TRANSFORMATION('','',#11,#90401); +#95602 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95603); +#95603 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('107','=>[0:1:1:49]','',#90395, + #90418,$); +#95604 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#90420)); +#95605 = SHAPE_DEFINITION_REPRESENTATION(#95606,#95612); +#95606 = PRODUCT_DEFINITION_SHAPE('','',#95607); +#95607 = PRODUCT_DEFINITION('design','',#95608,#95611); +#95608 = PRODUCT_DEFINITION_FORMATION('','',#95609); +#95609 = PRODUCT('TO-252-2','TO-252-2','',(#95610)); +#95610 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95611 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95612 = SHAPE_REPRESENTATION('',(#11,#95613),#95617); +#95613 = AXIS2_PLACEMENT_3D('',#95614,#95615,#95616); +#95614 = CARTESIAN_POINT('',(0.,0.,0.)); +#95615 = DIRECTION('',(0.,0.,1.)); +#95616 = DIRECTION('',(1.,0.,-0.)); +#95617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95621)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95618,#95619,#95620)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95618 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95619 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95620 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95621 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95618, + 'distance_accuracy_value','confusion accuracy'); +#95622 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95623,#95625); +#95623 = ( REPRESENTATION_RELATIONSHIP('','',#95612,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95624) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95624 = ITEM_DEFINED_TRANSFORMATION('','',#11,#351); +#95625 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95626); +#95626 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('117','Q10','',#5,#95607,$); +#95627 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95609)); +#95628 = SHAPE_DEFINITION_REPRESENTATION(#95629,#95635); +#95629 = PRODUCT_DEFINITION_SHAPE('','',#95630); +#95630 = PRODUCT_DEFINITION('design','',#95631,#95634); +#95631 = PRODUCT_DEFINITION_FORMATION('','',#95632); +#95632 = PRODUCT('CQ assembly','CQ assembly','',(#95633)); +#95633 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95634 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95635 = SHAPE_REPRESENTATION('',(#11,#95636),#95640); +#95636 = AXIS2_PLACEMENT_3D('',#95637,#95638,#95639); +#95637 = CARTESIAN_POINT('',(0.,0.,0.)); +#95638 = DIRECTION('',(0.,0.,1.)); +#95639 = DIRECTION('',(1.,0.,0.)); +#95640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95644)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95641,#95642,#95643)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95641 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95642 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95643 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95644 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95641, + 'distance_accuracy_value','confusion accuracy'); +#95645 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95646,#95648); +#95646 = ( REPRESENTATION_RELATIONSHIP('','',#95635,#95612) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95647) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95647 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95613); +#95648 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95649); +#95649 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('116','=>[0:1:1:51]','',#95607, + #95630,$); +#95650 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95632)); +#95651 = SHAPE_DEFINITION_REPRESENTATION(#95652,#95658); +#95652 = PRODUCT_DEFINITION_SHAPE('','',#95653); +#95653 = PRODUCT_DEFINITION('design','',#95654,#95657); +#95654 = PRODUCT_DEFINITION_FORMATION('','',#95655); +#95655 = PRODUCT('932d09b2-9c39-11ed-93f0-dde97e994e83', + '932d09b2-9c39-11ed-93f0-dde97e994e83','',(#95656)); +#95656 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95657 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95658 = SHAPE_REPRESENTATION('',(#11,#95659,#95663,#95667),#95671); +#95659 = AXIS2_PLACEMENT_3D('',#95660,#95661,#95662); +#95660 = CARTESIAN_POINT('',(0.,0.,0.)); +#95661 = DIRECTION('',(0.,0.,1.)); +#95662 = DIRECTION('',(1.,0.,0.)); +#95663 = AXIS2_PLACEMENT_3D('',#95664,#95665,#95666); +#95664 = CARTESIAN_POINT('',(0.,0.,0.)); +#95665 = DIRECTION('',(0.,0.,1.)); +#95666 = DIRECTION('',(1.,0.,0.)); +#95667 = AXIS2_PLACEMENT_3D('',#95668,#95669,#95670); +#95668 = CARTESIAN_POINT('',(0.,0.,0.)); +#95669 = DIRECTION('',(0.,0.,1.)); +#95670 = DIRECTION('',(1.,0.,0.)); +#95671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95675)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95672,#95673,#95674)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95672 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95673 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95674 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95675 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95672, + 'distance_accuracy_value','confusion accuracy'); +#95676 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95677,#95679); +#95677 = ( REPRESENTATION_RELATIONSHIP('','',#95658,#95635) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95678) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95678 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95636); +#95679 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95680); +#95680 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('115','7','',#95630,#95653,$); +#95681 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95655)); +#95682 = SHAPE_DEFINITION_REPRESENTATION(#95683,#95689); +#95683 = PRODUCT_DEFINITION_SHAPE('','',#95684); +#95684 = PRODUCT_DEFINITION('design','',#95685,#95688); +#95685 = PRODUCT_DEFINITION_FORMATION('','',#95686); +#95686 = PRODUCT('932d09b3-9c39-11ed-93f0-dde97e994e83', + '932d09b3-9c39-11ed-93f0-dde97e994e83','',(#95687)); +#95687 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95688 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95689 = SHAPE_REPRESENTATION('',(#11,#95690),#95694); +#95690 = AXIS2_PLACEMENT_3D('',#95691,#95692,#95693); +#95691 = CARTESIAN_POINT('',(0.,0.,0.)); +#95692 = DIRECTION('',(0.,0.,1.)); +#95693 = DIRECTION('',(1.,0.,0.)); +#95694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95698)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95695,#95696,#95697)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95695 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95696 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95697 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95698 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95695, + 'distance_accuracy_value','confusion accuracy'); +#95699 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95700,#95702); +#95700 = ( REPRESENTATION_RELATIONSHIP('','',#95689,#95658) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95701) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95701 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95659); +#95702 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95703); +#95703 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('110','2','',#95653,#95684,$); +#95704 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95686)); +#95705 = SHAPE_DEFINITION_REPRESENTATION(#95706,#95712); +#95706 = PRODUCT_DEFINITION_SHAPE('','',#95707); +#95707 = PRODUCT_DEFINITION('design','',#95708,#95711); +#95708 = PRODUCT_DEFINITION_FORMATION('','',#95709); +#95709 = PRODUCT('932d09b3-9c39-11ed-93f0-dde97e994e83_part', + '932d09b3-9c39-11ed-93f0-dde97e994e83_part','',(#95710)); +#95710 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95711 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95712 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#95713),#96055); +#95713 = MANIFOLD_SOLID_BREP('',#95714); +#95714 = CLOSED_SHELL('',(#95715,#95755,#95802,#95826,#95857,#95897, + #95921,#95938,#95969,#95981,#96009,#96021,#96046)); +#95715 = ADVANCED_FACE('',(#95716),#95750,.F.); +#95716 = FACE_BOUND('',#95717,.F.); +#95717 = EDGE_LOOP('',(#95718,#95728,#95736,#95744)); +#95718 = ORIENTED_EDGE('',*,*,#95719,.T.); +#95719 = EDGE_CURVE('',#95720,#95722,#95724,.T.); +#95720 = VERTEX_POINT('',#95721); +#95721 = CARTESIAN_POINT('',(-3.11,3.25,0.9)); +#95722 = VERTEX_POINT('',#95723); +#95723 = CARTESIAN_POINT('',(-3.11,3.25,0.92)); +#95724 = LINE('',#95725,#95726); +#95725 = CARTESIAN_POINT('',(-3.11,3.25,2.E-02)); +#95726 = VECTOR('',#95727,1.); +#95727 = DIRECTION('',(0.,0.,1.)); +#95728 = ORIENTED_EDGE('',*,*,#95729,.T.); +#95729 = EDGE_CURVE('',#95722,#95730,#95732,.T.); +#95730 = VERTEX_POINT('',#95731); +#95731 = CARTESIAN_POINT('',(-3.11,-3.25,0.92)); +#95732 = LINE('',#95733,#95734); +#95733 = CARTESIAN_POINT('',(-3.11,3.25,0.92)); +#95734 = VECTOR('',#95735,1.); +#95735 = DIRECTION('',(0.,-1.,0.)); +#95736 = ORIENTED_EDGE('',*,*,#95737,.F.); +#95737 = EDGE_CURVE('',#95738,#95730,#95740,.T.); +#95738 = VERTEX_POINT('',#95739); +#95739 = CARTESIAN_POINT('',(-3.11,-3.25,0.9)); +#95740 = LINE('',#95741,#95742); +#95741 = CARTESIAN_POINT('',(-3.11,-3.25,2.E-02)); +#95742 = VECTOR('',#95743,1.); +#95743 = DIRECTION('',(0.,0.,1.)); +#95744 = ORIENTED_EDGE('',*,*,#95745,.F.); +#95745 = EDGE_CURVE('',#95720,#95738,#95746,.T.); +#95746 = LINE('',#95747,#95748); +#95747 = CARTESIAN_POINT('',(-3.11,3.25,0.9)); +#95748 = VECTOR('',#95749,1.); +#95749 = DIRECTION('',(0.,-1.,0.)); +#95750 = PLANE('',#95751); +#95751 = AXIS2_PLACEMENT_3D('',#95752,#95753,#95754); +#95752 = CARTESIAN_POINT('',(-3.11,3.25,2.E-02)); +#95753 = DIRECTION('',(1.,0.,-0.)); +#95754 = DIRECTION('',(0.,-1.,0.)); +#95755 = ADVANCED_FACE('',(#95756),#95797,.F.); +#95756 = FACE_BOUND('',#95757,.F.); +#95757 = EDGE_LOOP('',(#95758,#95759,#95767,#95775,#95783,#95791)); +#95758 = ORIENTED_EDGE('',*,*,#95719,.F.); +#95759 = ORIENTED_EDGE('',*,*,#95760,.T.); +#95760 = EDGE_CURVE('',#95720,#95761,#95763,.T.); +#95761 = VERTEX_POINT('',#95762); +#95762 = CARTESIAN_POINT('',(-2.91,3.25,2.E-02)); +#95763 = LINE('',#95764,#95765); +#95764 = CARTESIAN_POINT('',(-2.812161100196,3.25,-0.410491159136)); +#95765 = VECTOR('',#95766,1.); +#95766 = DIRECTION('',(0.221621103589,0.,-0.975132855791)); +#95767 = ORIENTED_EDGE('',*,*,#95768,.F.); +#95768 = EDGE_CURVE('',#95769,#95761,#95771,.T.); +#95769 = VERTEX_POINT('',#95770); +#95770 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95771 = LINE('',#95772,#95773); +#95772 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95773 = VECTOR('',#95774,1.); +#95774 = DIRECTION('',(-1.,0.,0.)); +#95775 = ORIENTED_EDGE('',*,*,#95776,.T.); +#95776 = EDGE_CURVE('',#95769,#95777,#95779,.T.); +#95777 = VERTEX_POINT('',#95778); +#95778 = CARTESIAN_POINT('',(3.11,3.25,0.52)); +#95779 = LINE('',#95780,#95781); +#95780 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95781 = VECTOR('',#95782,1.); +#95782 = DIRECTION('',(0.,0.,1.)); +#95783 = ORIENTED_EDGE('',*,*,#95784,.T.); +#95784 = EDGE_CURVE('',#95777,#95785,#95787,.T.); +#95785 = VERTEX_POINT('',#95786); +#95786 = CARTESIAN_POINT('',(2.998888888889,3.25,0.92)); +#95787 = LINE('',#95788,#95789); +#95788 = CARTESIAN_POINT('',(3.04946991404,3.25,0.737908309456)); +#95789 = VECTOR('',#95790,1.); +#95790 = DIRECTION('',(-0.267643863786,-0.,0.96351790963)); +#95791 = ORIENTED_EDGE('',*,*,#95792,.T.); +#95792 = EDGE_CURVE('',#95785,#95722,#95793,.T.); +#95793 = LINE('',#95794,#95795); +#95794 = CARTESIAN_POINT('',(2.61,3.25,0.92)); +#95795 = VECTOR('',#95796,1.); +#95796 = DIRECTION('',(-1.,0.,0.)); +#95797 = PLANE('',#95798); +#95798 = AXIS2_PLACEMENT_3D('',#95799,#95800,#95801); +#95799 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95800 = DIRECTION('',(0.,-1.,0.)); +#95801 = DIRECTION('',(-1.,0.,0.)); +#95802 = ADVANCED_FACE('',(#95803),#95821,.T.); +#95803 = FACE_BOUND('',#95804,.F.); +#95804 = EDGE_LOOP('',(#95805,#95806,#95807,#95815)); +#95805 = ORIENTED_EDGE('',*,*,#95760,.F.); +#95806 = ORIENTED_EDGE('',*,*,#95745,.T.); +#95807 = ORIENTED_EDGE('',*,*,#95808,.T.); +#95808 = EDGE_CURVE('',#95738,#95809,#95811,.T.); +#95809 = VERTEX_POINT('',#95810); +#95810 = CARTESIAN_POINT('',(-2.91,-3.25,2.E-02)); +#95811 = LINE('',#95812,#95813); +#95812 = CARTESIAN_POINT('',(-2.964911591356,-3.25,0.261611001965)); +#95813 = VECTOR('',#95814,1.); +#95814 = DIRECTION('',(0.221621103589,-0.,-0.975132855791)); +#95815 = ORIENTED_EDGE('',*,*,#95816,.F.); +#95816 = EDGE_CURVE('',#95761,#95809,#95817,.T.); +#95817 = LINE('',#95818,#95819); +#95818 = CARTESIAN_POINT('',(-2.91,3.25,2.E-02)); +#95819 = VECTOR('',#95820,1.); +#95820 = DIRECTION('',(0.,-1.,0.)); +#95821 = PLANE('',#95822); +#95822 = AXIS2_PLACEMENT_3D('',#95823,#95824,#95825); +#95823 = CARTESIAN_POINT('',(-3.01,3.25,0.46)); +#95824 = DIRECTION('',(-0.975132855791,0.,-0.221621103589)); +#95825 = DIRECTION('',(0.,1.,0.)); +#95826 = ADVANCED_FACE('',(#95827),#95852,.F.); +#95827 = FACE_BOUND('',#95828,.F.); +#95828 = EDGE_LOOP('',(#95829,#95839,#95845,#95846)); +#95829 = ORIENTED_EDGE('',*,*,#95830,.T.); +#95830 = EDGE_CURVE('',#95831,#95833,#95835,.T.); +#95831 = VERTEX_POINT('',#95832); +#95832 = CARTESIAN_POINT('',(-2.61,2.75,2.32)); +#95833 = VERTEX_POINT('',#95834); +#95834 = CARTESIAN_POINT('',(-2.61,-2.75,2.32)); +#95835 = LINE('',#95836,#95837); +#95836 = CARTESIAN_POINT('',(-2.61,3.25,2.32)); +#95837 = VECTOR('',#95838,1.); +#95838 = DIRECTION('',(0.,-1.,0.)); +#95839 = ORIENTED_EDGE('',*,*,#95840,.T.); +#95840 = EDGE_CURVE('',#95833,#95730,#95841,.T.); +#95841 = LINE('',#95842,#95843); +#95842 = CARTESIAN_POINT('',(-2.529715447154,-2.669715447154, + 2.544796747967)); +#95843 = VECTOR('',#95844,1.); +#95844 = DIRECTION('',(-0.318788356532,-0.318788356532,-0.892607398289) + ); +#95845 = ORIENTED_EDGE('',*,*,#95729,.F.); +#95846 = ORIENTED_EDGE('',*,*,#95847,.F.); +#95847 = EDGE_CURVE('',#95831,#95722,#95848,.T.); +#95848 = LINE('',#95849,#95850); +#95849 = CARTESIAN_POINT('',(-2.594756097561,2.734756097561, + 2.362682926829)); +#95850 = VECTOR('',#95851,1.); +#95851 = DIRECTION('',(-0.318788356532,0.318788356532,-0.892607398289)); +#95852 = PLANE('',#95853); +#95853 = AXIS2_PLACEMENT_3D('',#95854,#95855,#95856); +#95854 = CARTESIAN_POINT('',(-2.86,3.25,1.62)); +#95855 = DIRECTION('',(0.941741911595,7.015149670815E-18,-0.336336396998 + )); +#95856 = DIRECTION('',(6.606460461117E-18,-1.,-2.359450164685E-18)); +#95857 = ADVANCED_FACE('',(#95858),#95892,.F.); +#95858 = FACE_BOUND('',#95859,.F.); +#95859 = EDGE_LOOP('',(#95860,#95861,#95869,#95877,#95885,#95891)); +#95860 = ORIENTED_EDGE('',*,*,#95737,.T.); +#95861 = ORIENTED_EDGE('',*,*,#95862,.T.); +#95862 = EDGE_CURVE('',#95730,#95863,#95865,.T.); +#95863 = VERTEX_POINT('',#95864); +#95864 = CARTESIAN_POINT('',(2.998888888889,-3.25,0.92)); +#95865 = LINE('',#95866,#95867); +#95866 = CARTESIAN_POINT('',(-2.61,-3.25,0.92)); +#95867 = VECTOR('',#95868,1.); +#95868 = DIRECTION('',(1.,0.,0.)); +#95869 = ORIENTED_EDGE('',*,*,#95870,.F.); +#95870 = EDGE_CURVE('',#95871,#95863,#95873,.T.); +#95871 = VERTEX_POINT('',#95872); +#95872 = CARTESIAN_POINT('',(3.11,-3.25,0.52)); +#95873 = LINE('',#95874,#95875); +#95874 = CARTESIAN_POINT('',(2.826690544413,-3.25,1.539914040115)); +#95875 = VECTOR('',#95876,1.); +#95876 = DIRECTION('',(-0.267643863786,0.,0.96351790963)); +#95877 = ORIENTED_EDGE('',*,*,#95878,.F.); +#95878 = EDGE_CURVE('',#95879,#95871,#95881,.T.); +#95879 = VERTEX_POINT('',#95880); +#95880 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95881 = LINE('',#95882,#95883); +#95882 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95883 = VECTOR('',#95884,1.); +#95884 = DIRECTION('',(0.,0.,1.)); +#95885 = ORIENTED_EDGE('',*,*,#95886,.F.); +#95886 = EDGE_CURVE('',#95809,#95879,#95887,.T.); +#95887 = LINE('',#95888,#95889); +#95888 = CARTESIAN_POINT('',(-3.11,-3.25,2.E-02)); +#95889 = VECTOR('',#95890,1.); +#95890 = DIRECTION('',(1.,0.,0.)); +#95891 = ORIENTED_EDGE('',*,*,#95808,.F.); +#95892 = PLANE('',#95893); +#95893 = AXIS2_PLACEMENT_3D('',#95894,#95895,#95896); +#95894 = CARTESIAN_POINT('',(-3.11,-3.25,2.E-02)); +#95895 = DIRECTION('',(0.,1.,0.)); +#95896 = DIRECTION('',(1.,0.,0.)); +#95897 = ADVANCED_FACE('',(#95898),#95916,.F.); +#95898 = FACE_BOUND('',#95899,.F.); +#95899 = EDGE_LOOP('',(#95900,#95908,#95914,#95915)); +#95900 = ORIENTED_EDGE('',*,*,#95901,.F.); +#95901 = EDGE_CURVE('',#95902,#95785,#95904,.T.); +#95902 = VERTEX_POINT('',#95903); +#95903 = CARTESIAN_POINT('',(2.61,2.75,2.32)); +#95904 = LINE('',#95905,#95906); +#95905 = CARTESIAN_POINT('',(2.56571473387,2.69306180069,2.479426958068) + ); +#95906 = VECTOR('',#95907,1.); +#95907 = DIRECTION('',(0.253078917766,0.325387179985,-0.911084103957)); +#95908 = ORIENTED_EDGE('',*,*,#95909,.T.); +#95909 = EDGE_CURVE('',#95902,#95831,#95910,.T.); +#95910 = LINE('',#95911,#95912); +#95911 = CARTESIAN_POINT('',(2.61,2.75,2.32)); +#95912 = VECTOR('',#95913,1.); +#95913 = DIRECTION('',(-1.,0.,0.)); +#95914 = ORIENTED_EDGE('',*,*,#95847,.T.); +#95915 = ORIENTED_EDGE('',*,*,#95792,.F.); +#95916 = PLANE('',#95917); +#95917 = AXIS2_PLACEMENT_3D('',#95918,#95919,#95920); +#95918 = CARTESIAN_POINT('',(2.61,3.,1.62)); +#95919 = DIRECTION('',(7.015149670815E-18,-0.941741911595, + -0.336336396998)); +#95920 = DIRECTION('',(-1.,-6.606460461117E-18,-2.359450164685E-18)); +#95921 = ADVANCED_FACE('',(#95922),#95933,.F.); +#95922 = FACE_BOUND('',#95923,.F.); +#95923 = EDGE_LOOP('',(#95924,#95925,#95931,#95932)); +#95924 = ORIENTED_EDGE('',*,*,#95886,.T.); +#95925 = ORIENTED_EDGE('',*,*,#95926,.T.); +#95926 = EDGE_CURVE('',#95879,#95769,#95927,.T.); +#95927 = LINE('',#95928,#95929); +#95928 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95929 = VECTOR('',#95930,1.); +#95930 = DIRECTION('',(0.,1.,0.)); +#95931 = ORIENTED_EDGE('',*,*,#95768,.T.); +#95932 = ORIENTED_EDGE('',*,*,#95816,.T.); +#95933 = PLANE('',#95934); +#95934 = AXIS2_PLACEMENT_3D('',#95935,#95936,#95937); +#95935 = CARTESIAN_POINT('',(-1.396506949214E-16,0.,2.E-02)); +#95936 = DIRECTION('',(4.070108102062E-35,-3.727005214102E-35,1.)); +#95937 = DIRECTION('',(1.,0.,-4.070108102062E-35)); +#95938 = ADVANCED_FACE('',(#95939),#95964,.F.); +#95939 = FACE_BOUND('',#95940,.T.); +#95940 = EDGE_LOOP('',(#95941,#95949,#95955,#95956,#95962,#95963)); +#95941 = ORIENTED_EDGE('',*,*,#95942,.F.); +#95942 = EDGE_CURVE('',#95943,#95902,#95945,.T.); +#95943 = VERTEX_POINT('',#95944); +#95944 = CARTESIAN_POINT('',(2.61,-2.75,2.32)); +#95945 = LINE('',#95946,#95947); +#95946 = CARTESIAN_POINT('',(2.61,-3.25,2.32)); +#95947 = VECTOR('',#95948,1.); +#95948 = DIRECTION('',(0.,1.,0.)); +#95949 = ORIENTED_EDGE('',*,*,#95950,.T.); +#95950 = EDGE_CURVE('',#95943,#95863,#95951,.T.); +#95951 = LINE('',#95952,#95953); +#95952 = CARTESIAN_POINT('',(2.666180069016,-2.822231517306, + 2.117751751542)); +#95953 = VECTOR('',#95954,1.); +#95954 = DIRECTION('',(0.253078917766,-0.325387179985,-0.911084103957)); +#95955 = ORIENTED_EDGE('',*,*,#95870,.F.); +#95956 = ORIENTED_EDGE('',*,*,#95957,.T.); +#95957 = EDGE_CURVE('',#95871,#95777,#95958,.T.); +#95958 = LINE('',#95959,#95960); +#95959 = CARTESIAN_POINT('',(3.11,-3.25,0.52)); +#95960 = VECTOR('',#95961,1.); +#95961 = DIRECTION('',(0.,1.,0.)); +#95962 = ORIENTED_EDGE('',*,*,#95784,.T.); +#95963 = ORIENTED_EDGE('',*,*,#95901,.F.); +#95964 = PLANE('',#95965); +#95965 = AXIS2_PLACEMENT_3D('',#95966,#95967,#95968); +#95966 = CARTESIAN_POINT('',(2.86,-3.25,1.42)); +#95967 = DIRECTION('',(-0.96351790963,0.,-0.267643863786)); +#95968 = DIRECTION('',(0.,-1.,-0.)); +#95969 = ADVANCED_FACE('',(#95970),#95976,.F.); +#95970 = FACE_BOUND('',#95971,.F.); +#95971 = EDGE_LOOP('',(#95972,#95973,#95974,#95975)); +#95972 = ORIENTED_EDGE('',*,*,#95878,.T.); +#95973 = ORIENTED_EDGE('',*,*,#95957,.T.); +#95974 = ORIENTED_EDGE('',*,*,#95776,.F.); +#95975 = ORIENTED_EDGE('',*,*,#95926,.F.); +#95976 = PLANE('',#95977); +#95977 = AXIS2_PLACEMENT_3D('',#95978,#95979,#95980); +#95978 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95979 = DIRECTION('',(-1.,0.,0.)); +#95980 = DIRECTION('',(0.,1.,0.)); +#95981 = ADVANCED_FACE('',(#95982,#95993),#96004,.T.); +#95982 = FACE_BOUND('',#95983,.T.); +#95983 = EDGE_LOOP('',(#95984,#95985,#95991,#95992)); +#95984 = ORIENTED_EDGE('',*,*,#95830,.T.); +#95985 = ORIENTED_EDGE('',*,*,#95986,.T.); +#95986 = EDGE_CURVE('',#95833,#95943,#95987,.T.); +#95987 = LINE('',#95988,#95989); +#95988 = CARTESIAN_POINT('',(-2.61,-2.75,2.32)); +#95989 = VECTOR('',#95990,1.); +#95990 = DIRECTION('',(1.,0.,0.)); +#95991 = ORIENTED_EDGE('',*,*,#95942,.T.); +#95992 = ORIENTED_EDGE('',*,*,#95909,.T.); +#95993 = FACE_BOUND('',#95994,.T.); +#95994 = EDGE_LOOP('',(#95995)); +#95995 = ORIENTED_EDGE('',*,*,#95996,.T.); +#95996 = EDGE_CURVE('',#95997,#95997,#95999,.T.); +#95997 = VERTEX_POINT('',#95998); +#95998 = CARTESIAN_POINT('',(-2.,-1.118303597555E-16,2.32)); +#95999 = CIRCLE('',#96000,0.5); +#96000 = AXIS2_PLACEMENT_3D('',#96001,#96002,#96003); +#96001 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.32)); +#96002 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96003 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96004 = PLANE('',#96005); +#96005 = AXIS2_PLACEMENT_3D('',#96006,#96007,#96008); +#96006 = CARTESIAN_POINT('',(-1.396506949214E-16,0.,2.32)); +#96007 = DIRECTION('',(4.070108102062E-35,-3.727005214102E-35,1.)); +#96008 = DIRECTION('',(1.,0.,-4.070108102062E-35)); +#96009 = ADVANCED_FACE('',(#96010),#96016,.F.); +#96010 = FACE_BOUND('',#96011,.F.); +#96011 = EDGE_LOOP('',(#96012,#96013,#96014,#96015)); +#96012 = ORIENTED_EDGE('',*,*,#95840,.F.); +#96013 = ORIENTED_EDGE('',*,*,#95986,.T.); +#96014 = ORIENTED_EDGE('',*,*,#95950,.T.); +#96015 = ORIENTED_EDGE('',*,*,#95862,.F.); +#96016 = PLANE('',#96017); +#96017 = AXIS2_PLACEMENT_3D('',#96018,#96019,#96020); +#96018 = CARTESIAN_POINT('',(-2.61,-3.,1.62)); +#96019 = DIRECTION('',(-7.015149670815E-18,0.941741911595, + -0.336336396998)); +#96020 = DIRECTION('',(1.,6.606460461117E-18,-2.359450164685E-18)); +#96021 = ADVANCED_FACE('',(#96022),#96041,.F.); +#96022 = FACE_BOUND('',#96023,.F.); +#96023 = EDGE_LOOP('',(#96024,#96033,#96039,#96040)); +#96024 = ORIENTED_EDGE('',*,*,#96025,.F.); +#96025 = EDGE_CURVE('',#96026,#96026,#96028,.T.); +#96026 = VERTEX_POINT('',#96027); +#96027 = CARTESIAN_POINT('',(-2.,-1.118303597555E-16,2.22)); +#96028 = CIRCLE('',#96029,0.5); +#96029 = AXIS2_PLACEMENT_3D('',#96030,#96031,#96032); +#96030 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.22)); +#96031 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96032 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96033 = ORIENTED_EDGE('',*,*,#96034,.F.); +#96034 = EDGE_CURVE('',#95997,#96026,#96035,.T.); +#96035 = LINE('',#96036,#96037); +#96036 = CARTESIAN_POINT('',(-2.,-1.118303597555E-16,2.32)); +#96037 = VECTOR('',#96038,1.); +#96038 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96039 = ORIENTED_EDGE('',*,*,#95996,.T.); +#96040 = ORIENTED_EDGE('',*,*,#96034,.T.); +#96041 = CYLINDRICAL_SURFACE('',#96042,0.5); +#96042 = AXIS2_PLACEMENT_3D('',#96043,#96044,#96045); +#96043 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.32)); +#96044 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96045 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96046 = ADVANCED_FACE('',(#96047),#96050,.F.); +#96047 = FACE_BOUND('',#96048,.F.); +#96048 = EDGE_LOOP('',(#96049)); +#96049 = ORIENTED_EDGE('',*,*,#96025,.T.); +#96050 = PLANE('',#96051); +#96051 = AXIS2_PLACEMENT_3D('',#96052,#96053,#96054); +#96052 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.22)); +#96053 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96054 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96059)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96056,#96057,#96058)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96056 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96057 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96058 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96059 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96056, + 'distance_accuracy_value','confusion accuracy'); +#96060 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96061,#96063); +#96061 = ( REPRESENTATION_RELATIONSHIP('','',#95712,#95689) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96062) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96062 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95690); +#96063 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96064); +#96064 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('109','1','',#95684,#95707,$); +#96065 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95709)); +#96066 = SHAPE_DEFINITION_REPRESENTATION(#96067,#96073); +#96067 = PRODUCT_DEFINITION_SHAPE('','',#96068); +#96068 = PRODUCT_DEFINITION('design','',#96069,#96072); +#96069 = PRODUCT_DEFINITION_FORMATION('','',#96070); +#96070 = PRODUCT('932d09b4-9c39-11ed-93f0-dde97e994e83', + '932d09b4-9c39-11ed-93f0-dde97e994e83','',(#96071)); +#96071 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96072 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96073 = SHAPE_REPRESENTATION('',(#11,#96074),#96078); +#96074 = AXIS2_PLACEMENT_3D('',#96075,#96076,#96077); +#96075 = CARTESIAN_POINT('',(0.,0.,0.)); +#96076 = DIRECTION('',(0.,0.,1.)); +#96077 = DIRECTION('',(1.,0.,0.)); +#96078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96082)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96079,#96080,#96081)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96079 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96080 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96081 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96082 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96079, + 'distance_accuracy_value','confusion accuracy'); +#96083 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96084,#96086); +#96084 = ( REPRESENTATION_RELATIONSHIP('','',#96073,#95658) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96085) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96085 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95663); +#96086 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96087); +#96087 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('112','4','',#95653,#96068,$); +#96088 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96070)); +#96089 = SHAPE_DEFINITION_REPRESENTATION(#96090,#96096); +#96090 = PRODUCT_DEFINITION_SHAPE('','',#96091); +#96091 = PRODUCT_DEFINITION('design','',#96092,#96095); +#96092 = PRODUCT_DEFINITION_FORMATION('','',#96093); +#96093 = PRODUCT('932d09b4-9c39-11ed-93f0-dde97e994e83_part', + '932d09b4-9c39-11ed-93f0-dde97e994e83_part','',(#96094)); +#96094 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96095 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96096 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#96097),#96585); +#96097 = MANIFOLD_SOLID_BREP('',#96098); +#96098 = CLOSED_SHELL('',(#96099,#96139,#96172,#96279,#96304,#96403, + #96420,#96437,#96454,#96471,#96488,#96505,#96522,#96539,#96556, + #96573)); +#96099 = ADVANCED_FACE('',(#96100),#96134,.T.); +#96100 = FACE_BOUND('',#96101,.T.); +#96101 = EDGE_LOOP('',(#96102,#96112,#96120,#96128)); +#96102 = ORIENTED_EDGE('',*,*,#96103,.F.); +#96103 = EDGE_CURVE('',#96104,#96106,#96108,.T.); +#96104 = VERTEX_POINT('',#96105); +#96105 = CARTESIAN_POINT('',(4.11,-2.66,0.)); +#96106 = VERTEX_POINT('',#96107); +#96107 = CARTESIAN_POINT('',(4.11,-2.66,0.5)); +#96108 = LINE('',#96109,#96110); +#96109 = CARTESIAN_POINT('',(4.11,-2.66,0.)); +#96110 = VECTOR('',#96111,1.); +#96111 = DIRECTION('',(0.,0.,1.)); +#96112 = ORIENTED_EDGE('',*,*,#96113,.T.); +#96113 = EDGE_CURVE('',#96104,#96114,#96116,.T.); +#96114 = VERTEX_POINT('',#96115); +#96115 = CARTESIAN_POINT('',(4.11,-1.97,0.)); +#96116 = LINE('',#96117,#96118); +#96117 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96118 = VECTOR('',#96119,1.); +#96119 = DIRECTION('',(0.,1.,0.)); +#96120 = ORIENTED_EDGE('',*,*,#96121,.F.); +#96121 = EDGE_CURVE('',#96122,#96114,#96124,.T.); +#96122 = VERTEX_POINT('',#96123); +#96123 = CARTESIAN_POINT('',(4.11,-1.97,0.5)); +#96124 = LINE('',#96125,#96126); +#96125 = CARTESIAN_POINT('',(4.11,-1.97,0.)); +#96126 = VECTOR('',#96127,1.); +#96127 = DIRECTION('',(-0.,-0.,-1.)); +#96128 = ORIENTED_EDGE('',*,*,#96129,.T.); +#96129 = EDGE_CURVE('',#96122,#96106,#96130,.T.); +#96130 = LINE('',#96131,#96132); +#96131 = CARTESIAN_POINT('',(4.11,2.7,0.5)); +#96132 = VECTOR('',#96133,1.); +#96133 = DIRECTION('',(0.,-1.,0.)); +#96134 = PLANE('',#96135); +#96135 = AXIS2_PLACEMENT_3D('',#96136,#96137,#96138); +#96136 = CARTESIAN_POINT('',(4.11,0.,0.)); +#96137 = DIRECTION('',(1.,0.,-0.)); +#96138 = DIRECTION('',(0.,-1.,0.)); +#96139 = ADVANCED_FACE('',(#96140),#96167,.T.); +#96140 = FACE_BOUND('',#96141,.T.); +#96141 = EDGE_LOOP('',(#96142,#96143,#96152,#96160)); +#96142 = ORIENTED_EDGE('',*,*,#96103,.T.); +#96143 = ORIENTED_EDGE('',*,*,#96144,.T.); +#96144 = EDGE_CURVE('',#96106,#96145,#96147,.T.); +#96145 = VERTEX_POINT('',#96146); +#96146 = CARTESIAN_POINT('',(4.07,-2.7,0.5)); +#96147 = CIRCLE('',#96148,4.E-02); +#96148 = AXIS2_PLACEMENT_3D('',#96149,#96150,#96151); +#96149 = CARTESIAN_POINT('',(4.07,-2.66,0.5)); +#96150 = DIRECTION('',(-0.,-0.,-1.)); +#96151 = DIRECTION('',(0.,-1.,0.)); +#96152 = ORIENTED_EDGE('',*,*,#96153,.F.); +#96153 = EDGE_CURVE('',#96154,#96145,#96156,.T.); +#96154 = VERTEX_POINT('',#96155); +#96155 = CARTESIAN_POINT('',(4.07,-2.7,0.)); +#96156 = LINE('',#96157,#96158); +#96157 = CARTESIAN_POINT('',(4.07,-2.7,0.)); +#96158 = VECTOR('',#96159,1.); +#96159 = DIRECTION('',(0.,0.,1.)); +#96160 = ORIENTED_EDGE('',*,*,#96161,.F.); +#96161 = EDGE_CURVE('',#96104,#96154,#96162,.T.); +#96162 = CIRCLE('',#96163,4.E-02); +#96163 = AXIS2_PLACEMENT_3D('',#96164,#96165,#96166); +#96164 = CARTESIAN_POINT('',(4.07,-2.66,0.)); +#96165 = DIRECTION('',(-0.,-0.,-1.)); +#96166 = DIRECTION('',(0.,-1.,0.)); +#96167 = CYLINDRICAL_SURFACE('',#96168,4.E-02); +#96168 = AXIS2_PLACEMENT_3D('',#96169,#96170,#96171); +#96169 = CARTESIAN_POINT('',(4.07,-2.66,0.)); +#96170 = DIRECTION('',(0.,0.,1.)); +#96171 = DIRECTION('',(1.,0.,-0.)); +#96172 = ADVANCED_FACE('',(#96173),#96274,.F.); +#96173 = FACE_BOUND('',#96174,.F.); +#96174 = EDGE_LOOP('',(#96175,#96176,#96184,#96192,#96200,#96208,#96216, + #96224,#96232,#96241,#96249,#96258,#96266,#96273)); +#96175 = ORIENTED_EDGE('',*,*,#96144,.T.); +#96176 = ORIENTED_EDGE('',*,*,#96177,.T.); +#96177 = EDGE_CURVE('',#96145,#96178,#96180,.T.); +#96178 = VERTEX_POINT('',#96179); +#96179 = CARTESIAN_POINT('',(3.11,-2.7,0.5)); +#96180 = LINE('',#96181,#96182); +#96181 = CARTESIAN_POINT('',(4.11,-2.7,0.5)); +#96182 = VECTOR('',#96183,1.); +#96183 = DIRECTION('',(-1.,0.,0.)); +#96184 = ORIENTED_EDGE('',*,*,#96185,.T.); +#96185 = EDGE_CURVE('',#96178,#96186,#96188,.T.); +#96186 = VERTEX_POINT('',#96187); +#96187 = CARTESIAN_POINT('',(3.11,-2.16,0.5)); +#96188 = LINE('',#96189,#96190); +#96189 = CARTESIAN_POINT('',(3.11,-2.7,0.5)); +#96190 = VECTOR('',#96191,1.); +#96191 = DIRECTION('',(0.,1.,0.)); +#96192 = ORIENTED_EDGE('',*,*,#96193,.T.); +#96193 = EDGE_CURVE('',#96186,#96194,#96196,.T.); +#96194 = VERTEX_POINT('',#96195); +#96195 = CARTESIAN_POINT('',(-1.13,-2.16,0.5)); +#96196 = LINE('',#96197,#96198); +#96197 = CARTESIAN_POINT('',(3.11,-2.16,0.5)); +#96198 = VECTOR('',#96199,1.); +#96199 = DIRECTION('',(-1.,0.,0.)); +#96200 = ORIENTED_EDGE('',*,*,#96201,.T.); +#96201 = EDGE_CURVE('',#96194,#96202,#96204,.T.); +#96202 = VERTEX_POINT('',#96203); +#96203 = CARTESIAN_POINT('',(-1.13,2.16,0.5)); +#96204 = LINE('',#96205,#96206); +#96205 = CARTESIAN_POINT('',(-1.13,-2.16,0.5)); +#96206 = VECTOR('',#96207,1.); +#96207 = DIRECTION('',(0.,1.,0.)); +#96208 = ORIENTED_EDGE('',*,*,#96209,.T.); +#96209 = EDGE_CURVE('',#96202,#96210,#96212,.T.); +#96210 = VERTEX_POINT('',#96211); +#96211 = CARTESIAN_POINT('',(3.11,2.16,0.5)); +#96212 = LINE('',#96213,#96214); +#96213 = CARTESIAN_POINT('',(-1.13,2.16,0.5)); +#96214 = VECTOR('',#96215,1.); +#96215 = DIRECTION('',(1.,0.,0.)); +#96216 = ORIENTED_EDGE('',*,*,#96217,.T.); +#96217 = EDGE_CURVE('',#96210,#96218,#96220,.T.); +#96218 = VERTEX_POINT('',#96219); +#96219 = CARTESIAN_POINT('',(3.11,2.7,0.5)); +#96220 = LINE('',#96221,#96222); +#96221 = CARTESIAN_POINT('',(3.11,2.16,0.5)); +#96222 = VECTOR('',#96223,1.); +#96223 = DIRECTION('',(0.,1.,0.)); +#96224 = ORIENTED_EDGE('',*,*,#96225,.T.); +#96225 = EDGE_CURVE('',#96218,#96226,#96228,.T.); +#96226 = VERTEX_POINT('',#96227); +#96227 = CARTESIAN_POINT('',(4.07,2.7,0.5)); +#96228 = LINE('',#96229,#96230); +#96229 = CARTESIAN_POINT('',(3.11,2.7,0.5)); +#96230 = VECTOR('',#96231,1.); +#96231 = DIRECTION('',(1.,0.,0.)); +#96232 = ORIENTED_EDGE('',*,*,#96233,.F.); +#96233 = EDGE_CURVE('',#96234,#96226,#96236,.T.); +#96234 = VERTEX_POINT('',#96235); +#96235 = CARTESIAN_POINT('',(4.11,2.66,0.5)); +#96236 = CIRCLE('',#96237,4.E-02); +#96237 = AXIS2_PLACEMENT_3D('',#96238,#96239,#96240); +#96238 = CARTESIAN_POINT('',(4.07,2.66,0.5)); +#96239 = DIRECTION('',(0.,0.,1.)); +#96240 = DIRECTION('',(0.,-1.,0.)); +#96241 = ORIENTED_EDGE('',*,*,#96242,.T.); +#96242 = EDGE_CURVE('',#96234,#96243,#96245,.T.); +#96243 = VERTEX_POINT('',#96244); +#96244 = CARTESIAN_POINT('',(4.11,1.97,0.5)); +#96245 = LINE('',#96246,#96247); +#96246 = CARTESIAN_POINT('',(4.11,2.7,0.5)); +#96247 = VECTOR('',#96248,1.); +#96248 = DIRECTION('',(0.,-1.,0.)); +#96249 = ORIENTED_EDGE('',*,*,#96250,.F.); +#96250 = EDGE_CURVE('',#96251,#96243,#96253,.T.); +#96251 = VERTEX_POINT('',#96252); +#96252 = CARTESIAN_POINT('',(4.03,1.89,0.5)); +#96253 = CIRCLE('',#96254,8.E-02); +#96254 = AXIS2_PLACEMENT_3D('',#96255,#96256,#96257); +#96255 = CARTESIAN_POINT('',(4.11,1.89,0.5)); +#96256 = DIRECTION('',(0.,0.,-1.)); +#96257 = DIRECTION('',(1.,0.,0.)); +#96258 = ORIENTED_EDGE('',*,*,#96259,.T.); +#96259 = EDGE_CURVE('',#96251,#96260,#96262,.T.); +#96260 = VERTEX_POINT('',#96261); +#96261 = CARTESIAN_POINT('',(4.03,-1.89,0.5)); +#96262 = LINE('',#96263,#96264); +#96263 = CARTESIAN_POINT('',(4.03,1.89,0.5)); +#96264 = VECTOR('',#96265,1.); +#96265 = DIRECTION('',(0.,-1.,0.)); +#96266 = ORIENTED_EDGE('',*,*,#96267,.F.); +#96267 = EDGE_CURVE('',#96122,#96260,#96268,.T.); +#96268 = CIRCLE('',#96269,8.E-02); +#96269 = AXIS2_PLACEMENT_3D('',#96270,#96271,#96272); +#96270 = CARTESIAN_POINT('',(4.11,-1.89,0.5)); +#96271 = DIRECTION('',(0.,0.,-1.)); +#96272 = DIRECTION('',(1.,0.,0.)); +#96273 = ORIENTED_EDGE('',*,*,#96129,.T.); +#96274 = PLANE('',#96275); +#96275 = AXIS2_PLACEMENT_3D('',#96276,#96277,#96278); +#96276 = CARTESIAN_POINT('',(1.705187969925,6.260656153901E-17,0.5)); +#96277 = DIRECTION('',(-0.,-0.,-1.)); +#96278 = DIRECTION('',(-1.,0.,0.)); +#96279 = ADVANCED_FACE('',(#96280),#96299,.F.); +#96280 = FACE_BOUND('',#96281,.F.); +#96281 = EDGE_LOOP('',(#96282,#96283,#96291,#96298)); +#96282 = ORIENTED_EDGE('',*,*,#96267,.T.); +#96283 = ORIENTED_EDGE('',*,*,#96284,.F.); +#96284 = EDGE_CURVE('',#96285,#96260,#96287,.T.); +#96285 = VERTEX_POINT('',#96286); +#96286 = CARTESIAN_POINT('',(4.03,-1.89,0.)); +#96287 = LINE('',#96288,#96289); +#96288 = CARTESIAN_POINT('',(4.03,-1.89,0.)); +#96289 = VECTOR('',#96290,1.); +#96290 = DIRECTION('',(0.,0.,1.)); +#96291 = ORIENTED_EDGE('',*,*,#96292,.T.); +#96292 = EDGE_CURVE('',#96285,#96114,#96293,.T.); +#96293 = CIRCLE('',#96294,8.E-02); +#96294 = AXIS2_PLACEMENT_3D('',#96295,#96296,#96297); +#96295 = CARTESIAN_POINT('',(4.11,-1.89,0.)); +#96296 = DIRECTION('',(0.,0.,1.)); +#96297 = DIRECTION('',(1.,0.,-0.)); +#96298 = ORIENTED_EDGE('',*,*,#96121,.F.); +#96299 = CYLINDRICAL_SURFACE('',#96300,8.E-02); +#96300 = AXIS2_PLACEMENT_3D('',#96301,#96302,#96303); +#96301 = CARTESIAN_POINT('',(4.11,-1.89,0.)); +#96302 = DIRECTION('',(-0.,-0.,-1.)); +#96303 = DIRECTION('',(1.,0.,0.)); +#96304 = ADVANCED_FACE('',(#96305),#96398,.T.); +#96305 = FACE_BOUND('',#96306,.T.); +#96306 = EDGE_LOOP('',(#96307,#96308,#96309,#96317,#96325,#96333,#96341, + #96349,#96357,#96365,#96374,#96382,#96391,#96397)); +#96307 = ORIENTED_EDGE('',*,*,#96113,.F.); +#96308 = ORIENTED_EDGE('',*,*,#96161,.T.); +#96309 = ORIENTED_EDGE('',*,*,#96310,.T.); +#96310 = EDGE_CURVE('',#96154,#96311,#96313,.T.); +#96311 = VERTEX_POINT('',#96312); +#96312 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96313 = LINE('',#96314,#96315); +#96314 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96315 = VECTOR('',#96316,1.); +#96316 = DIRECTION('',(-1.,0.,0.)); +#96317 = ORIENTED_EDGE('',*,*,#96318,.T.); +#96318 = EDGE_CURVE('',#96311,#96319,#96321,.T.); +#96319 = VERTEX_POINT('',#96320); +#96320 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96321 = LINE('',#96322,#96323); +#96322 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96323 = VECTOR('',#96324,1.); +#96324 = DIRECTION('',(0.,1.,0.)); +#96325 = ORIENTED_EDGE('',*,*,#96326,.T.); +#96326 = EDGE_CURVE('',#96319,#96327,#96329,.T.); +#96327 = VERTEX_POINT('',#96328); +#96328 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96329 = LINE('',#96330,#96331); +#96330 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96331 = VECTOR('',#96332,1.); +#96332 = DIRECTION('',(-1.,0.,0.)); +#96333 = ORIENTED_EDGE('',*,*,#96334,.T.); +#96334 = EDGE_CURVE('',#96327,#96335,#96337,.T.); +#96335 = VERTEX_POINT('',#96336); +#96336 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96337 = LINE('',#96338,#96339); +#96338 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96339 = VECTOR('',#96340,1.); +#96340 = DIRECTION('',(0.,1.,0.)); +#96341 = ORIENTED_EDGE('',*,*,#96342,.T.); +#96342 = EDGE_CURVE('',#96335,#96343,#96345,.T.); +#96343 = VERTEX_POINT('',#96344); +#96344 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96345 = LINE('',#96346,#96347); +#96346 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96347 = VECTOR('',#96348,1.); +#96348 = DIRECTION('',(1.,0.,0.)); +#96349 = ORIENTED_EDGE('',*,*,#96350,.T.); +#96350 = EDGE_CURVE('',#96343,#96351,#96353,.T.); +#96351 = VERTEX_POINT('',#96352); +#96352 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96353 = LINE('',#96354,#96355); +#96354 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96355 = VECTOR('',#96356,1.); +#96356 = DIRECTION('',(0.,1.,0.)); +#96357 = ORIENTED_EDGE('',*,*,#96358,.T.); +#96358 = EDGE_CURVE('',#96351,#96359,#96361,.T.); +#96359 = VERTEX_POINT('',#96360); +#96360 = CARTESIAN_POINT('',(4.07,2.7,0.)); +#96361 = LINE('',#96362,#96363); +#96362 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96363 = VECTOR('',#96364,1.); +#96364 = DIRECTION('',(1.,0.,0.)); +#96365 = ORIENTED_EDGE('',*,*,#96366,.F.); +#96366 = EDGE_CURVE('',#96367,#96359,#96369,.T.); +#96367 = VERTEX_POINT('',#96368); +#96368 = CARTESIAN_POINT('',(4.11,2.66,0.)); +#96369 = CIRCLE('',#96370,4.E-02); +#96370 = AXIS2_PLACEMENT_3D('',#96371,#96372,#96373); +#96371 = CARTESIAN_POINT('',(4.07,2.66,0.)); +#96372 = DIRECTION('',(0.,0.,1.)); +#96373 = DIRECTION('',(0.,-1.,0.)); +#96374 = ORIENTED_EDGE('',*,*,#96375,.F.); +#96375 = EDGE_CURVE('',#96376,#96367,#96378,.T.); +#96376 = VERTEX_POINT('',#96377); +#96377 = CARTESIAN_POINT('',(4.11,1.97,0.)); +#96378 = LINE('',#96379,#96380); +#96379 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96380 = VECTOR('',#96381,1.); +#96381 = DIRECTION('',(0.,1.,0.)); +#96382 = ORIENTED_EDGE('',*,*,#96383,.T.); +#96383 = EDGE_CURVE('',#96376,#96384,#96386,.T.); +#96384 = VERTEX_POINT('',#96385); +#96385 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96386 = CIRCLE('',#96387,8.E-02); +#96387 = AXIS2_PLACEMENT_3D('',#96388,#96389,#96390); +#96388 = CARTESIAN_POINT('',(4.11,1.89,0.)); +#96389 = DIRECTION('',(0.,0.,1.)); +#96390 = DIRECTION('',(1.,0.,-0.)); +#96391 = ORIENTED_EDGE('',*,*,#96392,.T.); +#96392 = EDGE_CURVE('',#96384,#96285,#96393,.T.); +#96393 = LINE('',#96394,#96395); +#96394 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96395 = VECTOR('',#96396,1.); +#96396 = DIRECTION('',(0.,-1.,0.)); +#96397 = ORIENTED_EDGE('',*,*,#96292,.T.); +#96398 = PLANE('',#96399); +#96399 = AXIS2_PLACEMENT_3D('',#96400,#96401,#96402); +#96400 = CARTESIAN_POINT('',(1.705187969925,6.260656153901E-17,0.)); +#96401 = DIRECTION('',(-0.,-0.,-1.)); +#96402 = DIRECTION('',(-1.,0.,0.)); +#96403 = ADVANCED_FACE('',(#96404),#96415,.T.); +#96404 = FACE_BOUND('',#96405,.T.); +#96405 = EDGE_LOOP('',(#96406,#96407,#96408,#96409)); +#96406 = ORIENTED_EDGE('',*,*,#96310,.F.); +#96407 = ORIENTED_EDGE('',*,*,#96153,.T.); +#96408 = ORIENTED_EDGE('',*,*,#96177,.T.); +#96409 = ORIENTED_EDGE('',*,*,#96410,.F.); +#96410 = EDGE_CURVE('',#96311,#96178,#96411,.T.); +#96411 = LINE('',#96412,#96413); +#96412 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96413 = VECTOR('',#96414,1.); +#96414 = DIRECTION('',(0.,0.,1.)); +#96415 = PLANE('',#96416); +#96416 = AXIS2_PLACEMENT_3D('',#96417,#96418,#96419); +#96417 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96418 = DIRECTION('',(0.,-1.,0.)); +#96419 = DIRECTION('',(-1.,0.,0.)); +#96420 = ADVANCED_FACE('',(#96421),#96432,.T.); +#96421 = FACE_BOUND('',#96422,.T.); +#96422 = EDGE_LOOP('',(#96423,#96429,#96430,#96431)); +#96423 = ORIENTED_EDGE('',*,*,#96424,.T.); +#96424 = EDGE_CURVE('',#96384,#96251,#96425,.T.); +#96425 = LINE('',#96426,#96427); +#96426 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96427 = VECTOR('',#96428,1.); +#96428 = DIRECTION('',(0.,0.,1.)); +#96429 = ORIENTED_EDGE('',*,*,#96259,.T.); +#96430 = ORIENTED_EDGE('',*,*,#96284,.F.); +#96431 = ORIENTED_EDGE('',*,*,#96392,.F.); +#96432 = PLANE('',#96433); +#96433 = AXIS2_PLACEMENT_3D('',#96434,#96435,#96436); +#96434 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96435 = DIRECTION('',(1.,0.,-0.)); +#96436 = DIRECTION('',(0.,-1.,0.)); +#96437 = ADVANCED_FACE('',(#96438),#96449,.F.); +#96438 = FACE_BOUND('',#96439,.F.); +#96439 = EDGE_LOOP('',(#96440,#96441,#96442,#96448)); +#96440 = ORIENTED_EDGE('',*,*,#96424,.T.); +#96441 = ORIENTED_EDGE('',*,*,#96250,.T.); +#96442 = ORIENTED_EDGE('',*,*,#96443,.T.); +#96443 = EDGE_CURVE('',#96243,#96376,#96444,.T.); +#96444 = LINE('',#96445,#96446); +#96445 = CARTESIAN_POINT('',(4.11,1.97,0.)); +#96446 = VECTOR('',#96447,1.); +#96447 = DIRECTION('',(-0.,-0.,-1.)); +#96448 = ORIENTED_EDGE('',*,*,#96383,.T.); +#96449 = CYLINDRICAL_SURFACE('',#96450,8.E-02); +#96450 = AXIS2_PLACEMENT_3D('',#96451,#96452,#96453); +#96451 = CARTESIAN_POINT('',(4.11,1.89,0.)); +#96452 = DIRECTION('',(-0.,-0.,-1.)); +#96453 = DIRECTION('',(1.,0.,0.)); +#96454 = ADVANCED_FACE('',(#96455),#96466,.T.); +#96455 = FACE_BOUND('',#96456,.T.); +#96456 = EDGE_LOOP('',(#96457,#96458,#96459,#96465)); +#96457 = ORIENTED_EDGE('',*,*,#96443,.T.); +#96458 = ORIENTED_EDGE('',*,*,#96375,.T.); +#96459 = ORIENTED_EDGE('',*,*,#96460,.T.); +#96460 = EDGE_CURVE('',#96367,#96234,#96461,.T.); +#96461 = LINE('',#96462,#96463); +#96462 = CARTESIAN_POINT('',(4.11,2.66,0.)); +#96463 = VECTOR('',#96464,1.); +#96464 = DIRECTION('',(0.,0.,1.)); +#96465 = ORIENTED_EDGE('',*,*,#96242,.T.); +#96466 = PLANE('',#96467); +#96467 = AXIS2_PLACEMENT_3D('',#96468,#96469,#96470); +#96468 = CARTESIAN_POINT('',(4.11,0.,0.)); +#96469 = DIRECTION('',(1.,0.,-0.)); +#96470 = DIRECTION('',(0.,-1.,0.)); +#96471 = ADVANCED_FACE('',(#96472),#96483,.T.); +#96472 = FACE_BOUND('',#96473,.T.); +#96473 = EDGE_LOOP('',(#96474,#96475,#96481,#96482)); +#96474 = ORIENTED_EDGE('',*,*,#96366,.T.); +#96475 = ORIENTED_EDGE('',*,*,#96476,.T.); +#96476 = EDGE_CURVE('',#96359,#96226,#96477,.T.); +#96477 = LINE('',#96478,#96479); +#96478 = CARTESIAN_POINT('',(4.07,2.7,0.)); +#96479 = VECTOR('',#96480,1.); +#96480 = DIRECTION('',(0.,0.,1.)); +#96481 = ORIENTED_EDGE('',*,*,#96233,.F.); +#96482 = ORIENTED_EDGE('',*,*,#96460,.F.); +#96483 = CYLINDRICAL_SURFACE('',#96484,4.E-02); +#96484 = AXIS2_PLACEMENT_3D('',#96485,#96486,#96487); +#96485 = CARTESIAN_POINT('',(4.07,2.66,0.)); +#96486 = DIRECTION('',(0.,0.,1.)); +#96487 = DIRECTION('',(1.,0.,-0.)); +#96488 = ADVANCED_FACE('',(#96489),#96500,.T.); +#96489 = FACE_BOUND('',#96490,.T.); +#96490 = EDGE_LOOP('',(#96491,#96492,#96498,#96499)); +#96491 = ORIENTED_EDGE('',*,*,#96358,.F.); +#96492 = ORIENTED_EDGE('',*,*,#96493,.T.); +#96493 = EDGE_CURVE('',#96351,#96218,#96494,.T.); +#96494 = LINE('',#96495,#96496); +#96495 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96496 = VECTOR('',#96497,1.); +#96497 = DIRECTION('',(0.,0.,1.)); +#96498 = ORIENTED_EDGE('',*,*,#96225,.T.); +#96499 = ORIENTED_EDGE('',*,*,#96476,.F.); +#96500 = PLANE('',#96501); +#96501 = AXIS2_PLACEMENT_3D('',#96502,#96503,#96504); +#96502 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96503 = DIRECTION('',(0.,1.,0.)); +#96504 = DIRECTION('',(1.,0.,0.)); +#96505 = ADVANCED_FACE('',(#96506),#96517,.T.); +#96506 = FACE_BOUND('',#96507,.T.); +#96507 = EDGE_LOOP('',(#96508,#96514,#96515,#96516)); +#96508 = ORIENTED_EDGE('',*,*,#96509,.T.); +#96509 = EDGE_CURVE('',#96343,#96210,#96510,.T.); +#96510 = LINE('',#96511,#96512); +#96511 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96512 = VECTOR('',#96513,1.); +#96513 = DIRECTION('',(0.,0.,1.)); +#96514 = ORIENTED_EDGE('',*,*,#96217,.T.); +#96515 = ORIENTED_EDGE('',*,*,#96493,.F.); +#96516 = ORIENTED_EDGE('',*,*,#96350,.F.); +#96517 = PLANE('',#96518); +#96518 = AXIS2_PLACEMENT_3D('',#96519,#96520,#96521); +#96519 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96520 = DIRECTION('',(-1.,0.,0.)); +#96521 = DIRECTION('',(0.,1.,0.)); +#96522 = ADVANCED_FACE('',(#96523),#96534,.T.); +#96523 = FACE_BOUND('',#96524,.T.); +#96524 = EDGE_LOOP('',(#96525,#96531,#96532,#96533)); +#96525 = ORIENTED_EDGE('',*,*,#96526,.T.); +#96526 = EDGE_CURVE('',#96335,#96202,#96527,.T.); +#96527 = LINE('',#96528,#96529); +#96528 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96529 = VECTOR('',#96530,1.); +#96530 = DIRECTION('',(0.,0.,1.)); +#96531 = ORIENTED_EDGE('',*,*,#96209,.T.); +#96532 = ORIENTED_EDGE('',*,*,#96509,.F.); +#96533 = ORIENTED_EDGE('',*,*,#96342,.F.); +#96534 = PLANE('',#96535); +#96535 = AXIS2_PLACEMENT_3D('',#96536,#96537,#96538); +#96536 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96537 = DIRECTION('',(0.,1.,0.)); +#96538 = DIRECTION('',(1.,0.,0.)); +#96539 = ADVANCED_FACE('',(#96540),#96551,.T.); +#96540 = FACE_BOUND('',#96541,.T.); +#96541 = EDGE_LOOP('',(#96542,#96548,#96549,#96550)); +#96542 = ORIENTED_EDGE('',*,*,#96543,.T.); +#96543 = EDGE_CURVE('',#96327,#96194,#96544,.T.); +#96544 = LINE('',#96545,#96546); +#96545 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96546 = VECTOR('',#96547,1.); +#96547 = DIRECTION('',(0.,0.,1.)); +#96548 = ORIENTED_EDGE('',*,*,#96201,.T.); +#96549 = ORIENTED_EDGE('',*,*,#96526,.F.); +#96550 = ORIENTED_EDGE('',*,*,#96334,.F.); +#96551 = PLANE('',#96552); +#96552 = AXIS2_PLACEMENT_3D('',#96553,#96554,#96555); +#96553 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96554 = DIRECTION('',(-1.,0.,0.)); +#96555 = DIRECTION('',(0.,1.,0.)); +#96556 = ADVANCED_FACE('',(#96557),#96568,.T.); +#96557 = FACE_BOUND('',#96558,.T.); +#96558 = EDGE_LOOP('',(#96559,#96565,#96566,#96567)); +#96559 = ORIENTED_EDGE('',*,*,#96560,.T.); +#96560 = EDGE_CURVE('',#96319,#96186,#96561,.T.); +#96561 = LINE('',#96562,#96563); +#96562 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96563 = VECTOR('',#96564,1.); +#96564 = DIRECTION('',(0.,0.,1.)); +#96565 = ORIENTED_EDGE('',*,*,#96193,.T.); +#96566 = ORIENTED_EDGE('',*,*,#96543,.F.); +#96567 = ORIENTED_EDGE('',*,*,#96326,.F.); +#96568 = PLANE('',#96569); +#96569 = AXIS2_PLACEMENT_3D('',#96570,#96571,#96572); +#96570 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96571 = DIRECTION('',(0.,-1.,0.)); +#96572 = DIRECTION('',(-1.,0.,0.)); +#96573 = ADVANCED_FACE('',(#96574),#96580,.T.); +#96574 = FACE_BOUND('',#96575,.T.); +#96575 = EDGE_LOOP('',(#96576,#96577,#96578,#96579)); +#96576 = ORIENTED_EDGE('',*,*,#96410,.T.); +#96577 = ORIENTED_EDGE('',*,*,#96185,.T.); +#96578 = ORIENTED_EDGE('',*,*,#96560,.F.); +#96579 = ORIENTED_EDGE('',*,*,#96318,.F.); +#96580 = PLANE('',#96581); +#96581 = AXIS2_PLACEMENT_3D('',#96582,#96583,#96584); +#96582 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96583 = DIRECTION('',(-1.,0.,0.)); +#96584 = DIRECTION('',(0.,1.,0.)); +#96585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96589)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96586,#96587,#96588)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96586 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96587 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96588 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96589 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96586, + 'distance_accuracy_value','confusion accuracy'); +#96590 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96591,#96593); +#96591 = ( REPRESENTATION_RELATIONSHIP('','',#96096,#96073) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96592) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96592 = ITEM_DEFINED_TRANSFORMATION('','',#11,#96074); +#96593 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96594); +#96594 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('111','3','',#96068,#96091,$); +#96595 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96093)); +#96596 = SHAPE_DEFINITION_REPRESENTATION(#96597,#96603); +#96597 = PRODUCT_DEFINITION_SHAPE('','',#96598); +#96598 = PRODUCT_DEFINITION('design','',#96599,#96602); +#96599 = PRODUCT_DEFINITION_FORMATION('','',#96600); +#96600 = PRODUCT('932d09b5-9c39-11ed-93f0-dde97e994e83', + '932d09b5-9c39-11ed-93f0-dde97e994e83','',(#96601)); +#96601 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96602 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96603 = SHAPE_REPRESENTATION('',(#11,#96604),#96608); +#96604 = AXIS2_PLACEMENT_3D('',#96605,#96606,#96607); +#96605 = CARTESIAN_POINT('',(0.,0.,0.)); +#96606 = DIRECTION('',(0.,0.,1.)); +#96607 = DIRECTION('',(1.,0.,0.)); +#96608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96612)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96609,#96610,#96611)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96609 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96610 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96611 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96612 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96609, + 'distance_accuracy_value','confusion accuracy'); +#96613 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96614,#96616); +#96614 = ( REPRESENTATION_RELATIONSHIP('','',#96603,#95658) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96615) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96615 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95667); +#96616 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96617); +#96617 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('114','6','',#95653,#96598,$); +#96618 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96600)); +#96619 = SHAPE_DEFINITION_REPRESENTATION(#96620,#96626); +#96620 = PRODUCT_DEFINITION_SHAPE('','',#96621); +#96621 = PRODUCT_DEFINITION('design','',#96622,#96625); +#96622 = PRODUCT_DEFINITION_FORMATION('','',#96623); +#96623 = PRODUCT('932d09b5-9c39-11ed-93f0-dde97e994e83_part', + '932d09b5-9c39-11ed-93f0-dde97e994e83_part','',(#96624)); +#96624 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96625 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96626 = SHAPE_REPRESENTATION('',(#11,#96627,#97317,#97599),#98289); +#96627 = MANIFOLD_SOLID_BREP('',#96628); +#96628 = CLOSED_SHELL('',(#96629,#96687,#96753,#96809,#96833,#96889, + #96948,#96965,#96982,#97049,#97066,#97097,#97121,#97146,#97163, + #97187,#97212,#97229,#97252,#97269,#97288,#97305)); +#96629 = ADVANCED_FACE('',(#96630),#96682,.T.); +#96630 = FACE_BOUND('',#96631,.T.); +#96631 = EDGE_LOOP('',(#96632,#96643,#96651,#96660,#96668,#96676)); +#96632 = ORIENTED_EDGE('',*,*,#96633,.T.); +#96633 = EDGE_CURVE('',#96634,#96636,#96638,.T.); +#96634 = VERTEX_POINT('',#96635); +#96635 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.93988764291)); +#96636 = VERTEX_POINT('',#96637); +#96637 = CARTESIAN_POINT('',(-4.24,-1.785,0.939877074976)); +#96638 = CIRCLE('',#96639,0.25); +#96639 = AXIS2_PLACEMENT_3D('',#96640,#96641,#96642); +#96640 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96641 = DIRECTION('',(0.,-1.,0.)); +#96642 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96643 = ORIENTED_EDGE('',*,*,#96644,.T.); +#96644 = EDGE_CURVE('',#96636,#96645,#96647,.T.); +#96645 = VERTEX_POINT('',#96646); +#96646 = CARTESIAN_POINT('',(-4.24,-1.785,1.439884120332)); +#96647 = LINE('',#96648,#96649); +#96648 = CARTESIAN_POINT('',(-4.24,-1.785,0.437372862773)); +#96649 = VECTOR('',#96650,1.); +#96650 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96651 = ORIENTED_EDGE('',*,*,#96652,.T.); +#96652 = EDGE_CURVE('',#96645,#96653,#96655,.T.); +#96653 = VERTEX_POINT('',#96654); +#96654 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96655 = CIRCLE('',#96656,0.75); +#96656 = AXIS2_PLACEMENT_3D('',#96657,#96658,#96659); +#96657 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96658 = DIRECTION('',(0.,1.,0.)); +#96659 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96660 = ORIENTED_EDGE('',*,*,#96661,.T.); +#96661 = EDGE_CURVE('',#96653,#96662,#96664,.T.); +#96662 = VERTEX_POINT('',#96663); +#96663 = CARTESIAN_POINT('',(-3.49,-1.785,1.43988764291)); +#96664 = LINE('',#96665,#96666); +#96665 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96666 = VECTOR('',#96667,1.); +#96667 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96668 = ORIENTED_EDGE('',*,*,#96669,.T.); +#96669 = EDGE_CURVE('',#96662,#96670,#96672,.T.); +#96670 = VERTEX_POINT('',#96671); +#96671 = CARTESIAN_POINT('',(-3.49,-1.785,0.93988764291)); +#96672 = LINE('',#96673,#96674); +#96673 = CARTESIAN_POINT('',(-3.49,-1.785,0.437372862773)); +#96674 = VECTOR('',#96675,1.); +#96675 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#96676 = ORIENTED_EDGE('',*,*,#96677,.T.); +#96677 = EDGE_CURVE('',#96670,#96634,#96678,.T.); +#96678 = LINE('',#96679,#96680); +#96679 = CARTESIAN_POINT('',(-2.237701336216,-1.785,0.93988764291)); +#96680 = VECTOR('',#96681,1.); +#96681 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96682 = PLANE('',#96683); +#96683 = AXIS2_PLACEMENT_3D('',#96684,#96685,#96686); +#96684 = CARTESIAN_POINT('',(-4.091426690538,-1.785,0.874745725546)); +#96685 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#96686 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96687 = ADVANCED_FACE('',(#96688),#96748,.F.); +#96688 = FACE_BOUND('',#96689,.F.); +#96689 = EDGE_LOOP('',(#96690,#96698,#96707,#96715,#96724,#96732,#96741, + #96747)); +#96690 = ORIENTED_EDGE('',*,*,#96691,.F.); +#96691 = EDGE_CURVE('',#96692,#96636,#96694,.T.); +#96692 = VERTEX_POINT('',#96693); +#96693 = CARTESIAN_POINT('',(-4.24,-1.905,0.939877074976)); +#96694 = LINE('',#96695,#96696); +#96695 = CARTESIAN_POINT('',(-4.24,-1.785,0.939877074976)); +#96696 = VECTOR('',#96697,1.); +#96697 = DIRECTION('',(-0.,1.,-0.)); +#96698 = ORIENTED_EDGE('',*,*,#96699,.T.); +#96699 = EDGE_CURVE('',#96692,#96700,#96702,.T.); +#96700 = VERTEX_POINT('',#96701); +#96701 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#96702 = CIRCLE('',#96703,0.25); +#96703 = AXIS2_PLACEMENT_3D('',#96704,#96705,#96706); +#96704 = CARTESIAN_POINT('',(-4.237701336216,-1.905,0.68988764291)); +#96705 = DIRECTION('',(0.,-1.,0.)); +#96706 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96707 = ORIENTED_EDGE('',*,*,#96708,.T.); +#96708 = EDGE_CURVE('',#96700,#96709,#96711,.T.); +#96709 = VERTEX_POINT('',#96710); +#96710 = CARTESIAN_POINT('',(-4.472624491413,-2.655,0.775392678742)); +#96711 = LINE('',#96712,#96713); +#96712 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#96713 = VECTOR('',#96714,1.); +#96714 = DIRECTION('',(0.,-1.,0.)); +#96715 = ORIENTED_EDGE('',*,*,#96716,.F.); +#96716 = EDGE_CURVE('',#96717,#96709,#96719,.T.); +#96717 = VERTEX_POINT('',#96718); +#96718 = CARTESIAN_POINT('',(-4.24,-2.655,0.939877074976)); +#96719 = CIRCLE('',#96720,0.25); +#96720 = AXIS2_PLACEMENT_3D('',#96721,#96722,#96723); +#96721 = CARTESIAN_POINT('',(-4.237701336216,-2.655,0.68988764291)); +#96722 = DIRECTION('',(0.,-1.,0.)); +#96723 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96724 = ORIENTED_EDGE('',*,*,#96725,.F.); +#96725 = EDGE_CURVE('',#96726,#96717,#96728,.T.); +#96726 = VERTEX_POINT('',#96727); +#96727 = CARTESIAN_POINT('',(-4.24,-2.775,0.939877074976)); +#96728 = LINE('',#96729,#96730); +#96729 = CARTESIAN_POINT('',(-4.24,-1.785,0.939877074976)); +#96730 = VECTOR('',#96731,1.); +#96731 = DIRECTION('',(-0.,1.,-0.)); +#96732 = ORIENTED_EDGE('',*,*,#96733,.F.); +#96733 = EDGE_CURVE('',#96734,#96726,#96736,.T.); +#96734 = VERTEX_POINT('',#96735); +#96735 = CARTESIAN_POINT('',(-4.237701336216,-2.775,0.93988764291)); +#96736 = CIRCLE('',#96737,0.25); +#96737 = AXIS2_PLACEMENT_3D('',#96738,#96739,#96740); +#96738 = CARTESIAN_POINT('',(-4.237701336216,-2.775,0.68988764291)); +#96739 = DIRECTION('',(0.,-1.,0.)); +#96740 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96741 = ORIENTED_EDGE('',*,*,#96742,.F.); +#96742 = EDGE_CURVE('',#96634,#96734,#96743,.T.); +#96743 = LINE('',#96744,#96745); +#96744 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.93988764291)); +#96745 = VECTOR('',#96746,1.); +#96746 = DIRECTION('',(0.,-1.,0.)); +#96747 = ORIENTED_EDGE('',*,*,#96633,.T.); +#96748 = CYLINDRICAL_SURFACE('',#96749,0.25); +#96749 = AXIS2_PLACEMENT_3D('',#96750,#96751,#96752); +#96750 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96751 = DIRECTION('',(-0.,1.,-0.)); +#96752 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96753 = ADVANCED_FACE('',(#96754),#96804,.T.); +#96754 = FACE_BOUND('',#96755,.T.); +#96755 = EDGE_LOOP('',(#96756,#96757,#96765,#96773,#96781,#96789,#96797, + #96803)); +#96756 = ORIENTED_EDGE('',*,*,#96677,.F.); +#96757 = ORIENTED_EDGE('',*,*,#96758,.T.); +#96758 = EDGE_CURVE('',#96670,#96759,#96761,.T.); +#96759 = VERTEX_POINT('',#96760); +#96760 = CARTESIAN_POINT('',(-3.49,-1.905,0.93988764291)); +#96761 = LINE('',#96762,#96763); +#96762 = CARTESIAN_POINT('',(-3.49,0.7325,0.93988764291)); +#96763 = VECTOR('',#96764,1.); +#96764 = DIRECTION('',(0.,-1.,0.)); +#96765 = ORIENTED_EDGE('',*,*,#96766,.F.); +#96766 = EDGE_CURVE('',#96767,#96759,#96769,.T.); +#96767 = VERTEX_POINT('',#96768); +#96768 = CARTESIAN_POINT('',(-2.237701336216,-1.905,0.93988764291)); +#96769 = LINE('',#96770,#96771); +#96770 = CARTESIAN_POINT('',(-2.237701336216,-1.905,0.93988764291)); +#96771 = VECTOR('',#96772,1.); +#96772 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96773 = ORIENTED_EDGE('',*,*,#96774,.T.); +#96774 = EDGE_CURVE('',#96767,#96775,#96777,.T.); +#96775 = VERTEX_POINT('',#96776); +#96776 = CARTESIAN_POINT('',(-2.237701336216,-2.655,0.93988764291)); +#96777 = LINE('',#96778,#96779); +#96778 = CARTESIAN_POINT('',(-2.237701336216,-1.905,0.93988764291)); +#96779 = VECTOR('',#96780,1.); +#96780 = DIRECTION('',(0.,-1.,0.)); +#96781 = ORIENTED_EDGE('',*,*,#96782,.T.); +#96782 = EDGE_CURVE('',#96775,#96783,#96785,.T.); +#96783 = VERTEX_POINT('',#96784); +#96784 = CARTESIAN_POINT('',(-3.49,-2.655,0.93988764291)); +#96785 = LINE('',#96786,#96787); +#96786 = CARTESIAN_POINT('',(-2.237701336216,-2.655,0.93988764291)); +#96787 = VECTOR('',#96788,1.); +#96788 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96789 = ORIENTED_EDGE('',*,*,#96790,.T.); +#96790 = EDGE_CURVE('',#96783,#96791,#96793,.T.); +#96791 = VERTEX_POINT('',#96792); +#96792 = CARTESIAN_POINT('',(-3.49,-2.775,0.93988764291)); +#96793 = LINE('',#96794,#96795); +#96794 = CARTESIAN_POINT('',(-3.49,0.7325,0.93988764291)); +#96795 = VECTOR('',#96796,1.); +#96796 = DIRECTION('',(0.,-1.,0.)); +#96797 = ORIENTED_EDGE('',*,*,#96798,.T.); +#96798 = EDGE_CURVE('',#96791,#96734,#96799,.T.); +#96799 = LINE('',#96800,#96801); +#96800 = CARTESIAN_POINT('',(-2.237701336216,-2.775,0.93988764291)); +#96801 = VECTOR('',#96802,1.); +#96802 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96803 = ORIENTED_EDGE('',*,*,#96742,.F.); +#96804 = PLANE('',#96805); +#96805 = AXIS2_PLACEMENT_3D('',#96806,#96807,#96808); +#96806 = CARTESIAN_POINT('',(-2.237701336216,-1.785,0.93988764291)); +#96807 = DIRECTION('',(-1.110223024625E-16,-0.,-1.)); +#96808 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96809 = ADVANCED_FACE('',(#96810),#96828,.T.); +#96810 = FACE_BOUND('',#96811,.T.); +#96811 = EDGE_LOOP('',(#96812,#96813,#96821,#96827)); +#96812 = ORIENTED_EDGE('',*,*,#96669,.F.); +#96813 = ORIENTED_EDGE('',*,*,#96814,.F.); +#96814 = EDGE_CURVE('',#96815,#96662,#96817,.T.); +#96815 = VERTEX_POINT('',#96816); +#96816 = CARTESIAN_POINT('',(-3.49,-1.905,1.43988764291)); +#96817 = LINE('',#96818,#96819); +#96818 = CARTESIAN_POINT('',(-3.49,0.7325,1.43988764291)); +#96819 = VECTOR('',#96820,1.); +#96820 = DIRECTION('',(-0.,1.,0.)); +#96821 = ORIENTED_EDGE('',*,*,#96822,.T.); +#96822 = EDGE_CURVE('',#96815,#96759,#96823,.T.); +#96823 = LINE('',#96824,#96825); +#96824 = CARTESIAN_POINT('',(-3.49,-1.905,0.437372862773)); +#96825 = VECTOR('',#96826,1.); +#96826 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#96827 = ORIENTED_EDGE('',*,*,#96758,.F.); +#96828 = PLANE('',#96829); +#96829 = AXIS2_PLACEMENT_3D('',#96830,#96831,#96832); +#96830 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#96831 = DIRECTION('',(1.,0.,-0.)); +#96832 = DIRECTION('',(0.,-1.,0.)); +#96833 = ADVANCED_FACE('',(#96834),#96884,.T.); +#96834 = FACE_BOUND('',#96835,.T.); +#96835 = EDGE_LOOP('',(#96836,#96837,#96845,#96853,#96861,#96869,#96877, + #96883)); +#96836 = ORIENTED_EDGE('',*,*,#96661,.F.); +#96837 = ORIENTED_EDGE('',*,*,#96838,.T.); +#96838 = EDGE_CURVE('',#96653,#96839,#96841,.T.); +#96839 = VERTEX_POINT('',#96840); +#96840 = CARTESIAN_POINT('',(-4.237701336216,-2.775,1.43988764291)); +#96841 = LINE('',#96842,#96843); +#96842 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96843 = VECTOR('',#96844,1.); +#96844 = DIRECTION('',(0.,-1.,0.)); +#96845 = ORIENTED_EDGE('',*,*,#96846,.T.); +#96846 = EDGE_CURVE('',#96839,#96847,#96849,.T.); +#96847 = VERTEX_POINT('',#96848); +#96848 = CARTESIAN_POINT('',(-3.49,-2.775,1.43988764291)); +#96849 = LINE('',#96850,#96851); +#96850 = CARTESIAN_POINT('',(-4.237701336216,-2.775,1.43988764291)); +#96851 = VECTOR('',#96852,1.); +#96852 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96853 = ORIENTED_EDGE('',*,*,#96854,.T.); +#96854 = EDGE_CURVE('',#96847,#96855,#96857,.T.); +#96855 = VERTEX_POINT('',#96856); +#96856 = CARTESIAN_POINT('',(-3.49,-2.655,1.43988764291)); +#96857 = LINE('',#96858,#96859); +#96858 = CARTESIAN_POINT('',(-3.49,0.7325,1.43988764291)); +#96859 = VECTOR('',#96860,1.); +#96860 = DIRECTION('',(-0.,1.,0.)); +#96861 = ORIENTED_EDGE('',*,*,#96862,.T.); +#96862 = EDGE_CURVE('',#96855,#96863,#96865,.T.); +#96863 = VERTEX_POINT('',#96864); +#96864 = CARTESIAN_POINT('',(-2.237701336216,-2.655,1.43988764291)); +#96865 = LINE('',#96866,#96867); +#96866 = CARTESIAN_POINT('',(-4.237701336216,-2.655,1.43988764291)); +#96867 = VECTOR('',#96868,1.); +#96868 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96869 = ORIENTED_EDGE('',*,*,#96870,.F.); +#96870 = EDGE_CURVE('',#96871,#96863,#96873,.T.); +#96871 = VERTEX_POINT('',#96872); +#96872 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#96873 = LINE('',#96874,#96875); +#96874 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#96875 = VECTOR('',#96876,1.); +#96876 = DIRECTION('',(0.,-1.,0.)); +#96877 = ORIENTED_EDGE('',*,*,#96878,.F.); +#96878 = EDGE_CURVE('',#96815,#96871,#96879,.T.); +#96879 = LINE('',#96880,#96881); +#96880 = CARTESIAN_POINT('',(-4.237701336216,-1.905,1.43988764291)); +#96881 = VECTOR('',#96882,1.); +#96882 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96883 = ORIENTED_EDGE('',*,*,#96814,.T.); +#96884 = PLANE('',#96885); +#96885 = AXIS2_PLACEMENT_3D('',#96886,#96887,#96888); +#96886 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96887 = DIRECTION('',(1.110223024625E-16,0.,1.)); +#96888 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96889 = ADVANCED_FACE('',(#96890),#96943,.T.); +#96890 = FACE_BOUND('',#96891,.T.); +#96891 = EDGE_LOOP('',(#96892,#96893,#96901,#96910,#96918,#96927,#96935, + #96942)); +#96892 = ORIENTED_EDGE('',*,*,#96652,.F.); +#96893 = ORIENTED_EDGE('',*,*,#96894,.F.); +#96894 = EDGE_CURVE('',#96895,#96645,#96897,.T.); +#96895 = VERTEX_POINT('',#96896); +#96896 = CARTESIAN_POINT('',(-4.24,-1.905,1.439884120332)); +#96897 = LINE('',#96898,#96899); +#96898 = CARTESIAN_POINT('',(-4.24,-1.785,1.439884120332)); +#96899 = VECTOR('',#96900,1.); +#96900 = DIRECTION('',(0.,1.,0.)); +#96901 = ORIENTED_EDGE('',*,*,#96902,.F.); +#96902 = EDGE_CURVE('',#96903,#96895,#96905,.T.); +#96903 = VERTEX_POINT('',#96904); +#96904 = CARTESIAN_POINT('',(-4.942470801806,-1.905,0.946402750404)); +#96905 = CIRCLE('',#96906,0.75); +#96906 = AXIS2_PLACEMENT_3D('',#96907,#96908,#96909); +#96907 = CARTESIAN_POINT('',(-4.237701336216,-1.905,0.68988764291)); +#96908 = DIRECTION('',(0.,1.,0.)); +#96909 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96910 = ORIENTED_EDGE('',*,*,#96911,.T.); +#96911 = EDGE_CURVE('',#96903,#96912,#96914,.T.); +#96912 = VERTEX_POINT('',#96913); +#96913 = CARTESIAN_POINT('',(-4.942470801806,-2.655,0.946402750404)); +#96914 = LINE('',#96915,#96916); +#96915 = CARTESIAN_POINT('',(-4.942470801806,-1.905,0.946402750404)); +#96916 = VECTOR('',#96917,1.); +#96917 = DIRECTION('',(0.,-1.,0.)); +#96918 = ORIENTED_EDGE('',*,*,#96919,.T.); +#96919 = EDGE_CURVE('',#96912,#96920,#96922,.T.); +#96920 = VERTEX_POINT('',#96921); +#96921 = CARTESIAN_POINT('',(-4.24,-2.655,1.439884120332)); +#96922 = CIRCLE('',#96923,0.75); +#96923 = AXIS2_PLACEMENT_3D('',#96924,#96925,#96926); +#96924 = CARTESIAN_POINT('',(-4.237701336216,-2.655,0.68988764291)); +#96925 = DIRECTION('',(0.,1.,0.)); +#96926 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96927 = ORIENTED_EDGE('',*,*,#96928,.F.); +#96928 = EDGE_CURVE('',#96929,#96920,#96931,.T.); +#96929 = VERTEX_POINT('',#96930); +#96930 = CARTESIAN_POINT('',(-4.24,-2.775,1.439884120332)); +#96931 = LINE('',#96932,#96933); +#96932 = CARTESIAN_POINT('',(-4.24,-1.785,1.439884120332)); +#96933 = VECTOR('',#96934,1.); +#96934 = DIRECTION('',(0.,1.,0.)); +#96935 = ORIENTED_EDGE('',*,*,#96936,.T.); +#96936 = EDGE_CURVE('',#96929,#96839,#96937,.T.); +#96937 = CIRCLE('',#96938,0.75); +#96938 = AXIS2_PLACEMENT_3D('',#96939,#96940,#96941); +#96939 = CARTESIAN_POINT('',(-4.237701336216,-2.775,0.68988764291)); +#96940 = DIRECTION('',(0.,1.,0.)); +#96941 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96942 = ORIENTED_EDGE('',*,*,#96838,.F.); +#96943 = CYLINDRICAL_SURFACE('',#96944,0.75); +#96944 = AXIS2_PLACEMENT_3D('',#96945,#96946,#96947); +#96945 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96946 = DIRECTION('',(0.,1.,0.)); +#96947 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96948 = ADVANCED_FACE('',(#96949),#96960,.T.); +#96949 = FACE_BOUND('',#96950,.T.); +#96950 = EDGE_LOOP('',(#96951,#96952,#96958,#96959)); +#96951 = ORIENTED_EDGE('',*,*,#96691,.F.); +#96952 = ORIENTED_EDGE('',*,*,#96953,.T.); +#96953 = EDGE_CURVE('',#96692,#96895,#96954,.T.); +#96954 = LINE('',#96955,#96956); +#96955 = CARTESIAN_POINT('',(-4.24,-1.905,0.437372862773)); +#96956 = VECTOR('',#96957,1.); +#96957 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96958 = ORIENTED_EDGE('',*,*,#96894,.T.); +#96959 = ORIENTED_EDGE('',*,*,#96644,.F.); +#96960 = PLANE('',#96961); +#96961 = AXIS2_PLACEMENT_3D('',#96962,#96963,#96964); +#96962 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#96963 = DIRECTION('',(-1.,0.,0.)); +#96964 = DIRECTION('',(0.,1.,0.)); +#96965 = ADVANCED_FACE('',(#96966),#96977,.T.); +#96966 = FACE_BOUND('',#96967,.T.); +#96967 = EDGE_LOOP('',(#96968,#96969,#96970,#96976)); +#96968 = ORIENTED_EDGE('',*,*,#96822,.F.); +#96969 = ORIENTED_EDGE('',*,*,#96878,.T.); +#96970 = ORIENTED_EDGE('',*,*,#96971,.T.); +#96971 = EDGE_CURVE('',#96871,#96767,#96972,.T.); +#96972 = LINE('',#96973,#96974); +#96973 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#96974 = VECTOR('',#96975,1.); +#96975 = DIRECTION('',(0.,0.,-1.)); +#96976 = ORIENTED_EDGE('',*,*,#96766,.T.); +#96977 = PLANE('',#96978); +#96978 = AXIS2_PLACEMENT_3D('',#96979,#96980,#96981); +#96979 = CARTESIAN_POINT('',(-4.091426690538,-1.905,0.874745725546)); +#96980 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#96981 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96982 = ADVANCED_FACE('',(#96983),#97044,.T.); +#96983 = FACE_BOUND('',#96984,.T.); +#96984 = EDGE_LOOP('',(#96985,#96995,#97003,#97012,#97018,#97019,#97020, + #97021,#97029,#97038)); +#96985 = ORIENTED_EDGE('',*,*,#96986,.T.); +#96986 = EDGE_CURVE('',#96987,#96989,#96991,.T.); +#96987 = VERTEX_POINT('',#96988); +#96988 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#96989 = VERTEX_POINT('',#96990); +#96990 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#96991 = LINE('',#96992,#96993); +#96992 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#96993 = VECTOR('',#96994,1.); +#96994 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#96995 = ORIENTED_EDGE('',*,*,#96996,.T.); +#96996 = EDGE_CURVE('',#96989,#96997,#96999,.T.); +#96997 = VERTEX_POINT('',#96998); +#96998 = CARTESIAN_POINT('',(-5.28,-1.905,0.5)); +#96999 = LINE('',#97000,#97001); +#97000 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#97001 = VECTOR('',#97002,1.); +#97002 = DIRECTION('',(1.,0.,0.)); +#97003 = ORIENTED_EDGE('',*,*,#97004,.T.); +#97004 = EDGE_CURVE('',#96997,#97005,#97007,.T.); +#97005 = VERTEX_POINT('',#97006); +#97006 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97007 = CIRCLE('',#97008,0.25); +#97008 = AXIS2_PLACEMENT_3D('',#97009,#97010,#97011); +#97009 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97010 = DIRECTION('',(0.,-1.,0.)); +#97011 = DIRECTION('',(0.,0.,-1.)); +#97012 = ORIENTED_EDGE('',*,*,#97013,.T.); +#97013 = EDGE_CURVE('',#97005,#96903,#97014,.T.); +#97014 = LINE('',#97015,#97016); +#97015 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97016 = VECTOR('',#97017,1.); +#97017 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97018 = ORIENTED_EDGE('',*,*,#96902,.T.); +#97019 = ORIENTED_EDGE('',*,*,#96953,.F.); +#97020 = ORIENTED_EDGE('',*,*,#96699,.T.); +#97021 = ORIENTED_EDGE('',*,*,#97022,.T.); +#97022 = EDGE_CURVE('',#96700,#97023,#97025,.T.); +#97023 = VERTEX_POINT('',#97024); +#97024 = CARTESIAN_POINT('',(-4.575230534411,-1.905,0.493484892506)); +#97025 = LINE('',#97026,#97027); +#97026 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#97027 = VECTOR('',#97028,1.); +#97028 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#97029 = ORIENTED_EDGE('',*,*,#97030,.T.); +#97030 = EDGE_CURVE('',#97023,#97031,#97033,.T.); +#97031 = VERTEX_POINT('',#97032); +#97032 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97033 = CIRCLE('',#97034,0.75); +#97034 = AXIS2_PLACEMENT_3D('',#97035,#97036,#97037); +#97035 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97036 = DIRECTION('',(0.,1.,0.)); +#97037 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97038 = ORIENTED_EDGE('',*,*,#97039,.T.); +#97039 = EDGE_CURVE('',#97031,#96987,#97040,.T.); +#97040 = LINE('',#97041,#97042); +#97041 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97042 = VECTOR('',#97043,1.); +#97043 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#97044 = PLANE('',#97045); +#97045 = AXIS2_PLACEMENT_3D('',#97046,#97047,#97048); +#97046 = CARTESIAN_POINT('',(-4.091426690538,-1.905,0.874745725546)); +#97047 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97048 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97049 = ADVANCED_FACE('',(#97050),#97061,.T.); +#97050 = FACE_BOUND('',#97051,.T.); +#97051 = EDGE_LOOP('',(#97052,#97053,#97059,#97060)); +#97052 = ORIENTED_EDGE('',*,*,#96870,.T.); +#97053 = ORIENTED_EDGE('',*,*,#97054,.T.); +#97054 = EDGE_CURVE('',#96863,#96775,#97055,.T.); +#97055 = LINE('',#97056,#97057); +#97056 = CARTESIAN_POINT('',(-2.237701336216,-2.655,1.43988764291)); +#97057 = VECTOR('',#97058,1.); +#97058 = DIRECTION('',(0.,0.,-1.)); +#97059 = ORIENTED_EDGE('',*,*,#96774,.F.); +#97060 = ORIENTED_EDGE('',*,*,#96971,.F.); +#97061 = PLANE('',#97062); +#97062 = AXIS2_PLACEMENT_3D('',#97063,#97064,#97065); +#97063 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#97064 = DIRECTION('',(1.,0.,0.)); +#97065 = DIRECTION('',(0.,0.,-1.)); +#97066 = ADVANCED_FACE('',(#97067),#97092,.T.); +#97067 = FACE_BOUND('',#97068,.T.); +#97068 = EDGE_LOOP('',(#97069,#97077,#97085,#97091)); +#97069 = ORIENTED_EDGE('',*,*,#97070,.T.); +#97070 = EDGE_CURVE('',#96987,#97071,#97073,.T.); +#97071 = VERTEX_POINT('',#97072); +#97072 = CARTESIAN_POINT('',(-5.79,-2.655,-2.70609920631E-16)); +#97073 = LINE('',#97074,#97075); +#97074 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#97075 = VECTOR('',#97076,1.); +#97076 = DIRECTION('',(0.,-1.,0.)); +#97077 = ORIENTED_EDGE('',*,*,#97078,.T.); +#97078 = EDGE_CURVE('',#97071,#97079,#97081,.T.); +#97079 = VERTEX_POINT('',#97080); +#97080 = CARTESIAN_POINT('',(-5.79,-2.655,0.5)); +#97081 = LINE('',#97082,#97083); +#97082 = CARTESIAN_POINT('',(-5.79,-2.655,-2.70609920631E-16)); +#97083 = VECTOR('',#97084,1.); +#97084 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#97085 = ORIENTED_EDGE('',*,*,#97086,.F.); +#97086 = EDGE_CURVE('',#96989,#97079,#97087,.T.); +#97087 = LINE('',#97088,#97089); +#97088 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#97089 = VECTOR('',#97090,1.); +#97090 = DIRECTION('',(0.,-1.,0.)); +#97091 = ORIENTED_EDGE('',*,*,#96986,.F.); +#97092 = PLANE('',#97093); +#97093 = AXIS2_PLACEMENT_3D('',#97094,#97095,#97096); +#97094 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#97095 = DIRECTION('',(-1.,0.,1.7763568394E-15)); +#97096 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#97097 = ADVANCED_FACE('',(#97098),#97116,.T.); +#97098 = FACE_BOUND('',#97099,.T.); +#97099 = EDGE_LOOP('',(#97100,#97108,#97114,#97115)); +#97100 = ORIENTED_EDGE('',*,*,#97101,.T.); +#97101 = EDGE_CURVE('',#97031,#97102,#97104,.T.); +#97102 = VERTEX_POINT('',#97103); +#97103 = CARTESIAN_POINT('',(-5.28,-2.655,-2.22044604925E-16)); +#97104 = LINE('',#97105,#97106); +#97105 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97106 = VECTOR('',#97107,1.); +#97107 = DIRECTION('',(0.,-1.,0.)); +#97108 = ORIENTED_EDGE('',*,*,#97109,.T.); +#97109 = EDGE_CURVE('',#97102,#97071,#97110,.T.); +#97110 = LINE('',#97111,#97112); +#97111 = CARTESIAN_POINT('',(-5.28,-2.655,-2.22044604925E-16)); +#97112 = VECTOR('',#97113,1.); +#97113 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#97114 = ORIENTED_EDGE('',*,*,#97070,.F.); +#97115 = ORIENTED_EDGE('',*,*,#97039,.F.); +#97116 = PLANE('',#97117); +#97117 = AXIS2_PLACEMENT_3D('',#97118,#97119,#97120); +#97118 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97119 = DIRECTION('',(9.522610922745E-17,0.,-1.)); +#97120 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#97121 = ADVANCED_FACE('',(#97122),#97141,.T.); +#97122 = FACE_BOUND('',#97123,.T.); +#97123 = EDGE_LOOP('',(#97124,#97132,#97139,#97140)); +#97124 = ORIENTED_EDGE('',*,*,#97125,.T.); +#97125 = EDGE_CURVE('',#97023,#97126,#97128,.T.); +#97126 = VERTEX_POINT('',#97127); +#97127 = CARTESIAN_POINT('',(-4.575230534411,-2.655,0.493484892506)); +#97128 = LINE('',#97129,#97130); +#97129 = CARTESIAN_POINT('',(-4.575230534411,-1.905,0.493484892506)); +#97130 = VECTOR('',#97131,1.); +#97131 = DIRECTION('',(0.,-1.,0.)); +#97132 = ORIENTED_EDGE('',*,*,#97133,.T.); +#97133 = EDGE_CURVE('',#97126,#97102,#97134,.T.); +#97134 = CIRCLE('',#97135,0.75); +#97135 = AXIS2_PLACEMENT_3D('',#97136,#97137,#97138); +#97136 = CARTESIAN_POINT('',(-5.28,-2.655,0.75)); +#97137 = DIRECTION('',(0.,1.,0.)); +#97138 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97139 = ORIENTED_EDGE('',*,*,#97101,.F.); +#97140 = ORIENTED_EDGE('',*,*,#97030,.F.); +#97141 = CYLINDRICAL_SURFACE('',#97142,0.75); +#97142 = AXIS2_PLACEMENT_3D('',#97143,#97144,#97145); +#97143 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97144 = DIRECTION('',(0.,1.,0.)); +#97145 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97146 = ADVANCED_FACE('',(#97147),#97158,.T.); +#97147 = FACE_BOUND('',#97148,.T.); +#97148 = EDGE_LOOP('',(#97149,#97150,#97156,#97157)); +#97149 = ORIENTED_EDGE('',*,*,#96708,.T.); +#97150 = ORIENTED_EDGE('',*,*,#97151,.T.); +#97151 = EDGE_CURVE('',#96709,#97126,#97152,.T.); +#97152 = LINE('',#97153,#97154); +#97153 = CARTESIAN_POINT('',(-4.472624491413,-2.655,0.775392678742)); +#97154 = VECTOR('',#97155,1.); +#97155 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#97156 = ORIENTED_EDGE('',*,*,#97125,.F.); +#97157 = ORIENTED_EDGE('',*,*,#97022,.F.); +#97158 = PLANE('',#97159); +#97159 = AXIS2_PLACEMENT_3D('',#97160,#97161,#97162); +#97160 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#97161 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97162 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#97163 = ADVANCED_FACE('',(#97164),#97182,.T.); +#97164 = FACE_BOUND('',#97165,.T.); +#97165 = EDGE_LOOP('',(#97166,#97174,#97180,#97181)); +#97166 = ORIENTED_EDGE('',*,*,#97167,.T.); +#97167 = EDGE_CURVE('',#97005,#97168,#97170,.T.); +#97168 = VERTEX_POINT('',#97169); +#97169 = CARTESIAN_POINT('',(-5.045076844804,-2.655,0.664494964169)); +#97170 = LINE('',#97171,#97172); +#97171 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97172 = VECTOR('',#97173,1.); +#97173 = DIRECTION('',(0.,-1.,0.)); +#97174 = ORIENTED_EDGE('',*,*,#97175,.T.); +#97175 = EDGE_CURVE('',#97168,#96912,#97176,.T.); +#97176 = LINE('',#97177,#97178); +#97177 = CARTESIAN_POINT('',(-5.045076844804,-2.655,0.664494964169)); +#97178 = VECTOR('',#97179,1.); +#97179 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97180 = ORIENTED_EDGE('',*,*,#96911,.F.); +#97181 = ORIENTED_EDGE('',*,*,#97013,.F.); +#97182 = PLANE('',#97183); +#97183 = AXIS2_PLACEMENT_3D('',#97184,#97185,#97186); +#97184 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97185 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97186 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97187 = ADVANCED_FACE('',(#97188),#97207,.F.); +#97188 = FACE_BOUND('',#97189,.F.); +#97189 = EDGE_LOOP('',(#97190,#97191,#97192,#97201)); +#97190 = ORIENTED_EDGE('',*,*,#97004,.T.); +#97191 = ORIENTED_EDGE('',*,*,#97167,.T.); +#97192 = ORIENTED_EDGE('',*,*,#97193,.F.); +#97193 = EDGE_CURVE('',#97194,#97168,#97196,.T.); +#97194 = VERTEX_POINT('',#97195); +#97195 = CARTESIAN_POINT('',(-5.28,-2.655,0.5)); +#97196 = CIRCLE('',#97197,0.25); +#97197 = AXIS2_PLACEMENT_3D('',#97198,#97199,#97200); +#97198 = CARTESIAN_POINT('',(-5.28,-2.655,0.75)); +#97199 = DIRECTION('',(0.,-1.,0.)); +#97200 = DIRECTION('',(0.,0.,-1.)); +#97201 = ORIENTED_EDGE('',*,*,#97202,.F.); +#97202 = EDGE_CURVE('',#96997,#97194,#97203,.T.); +#97203 = LINE('',#97204,#97205); +#97204 = CARTESIAN_POINT('',(-5.28,-1.905,0.5)); +#97205 = VECTOR('',#97206,1.); +#97206 = DIRECTION('',(0.,-1.,0.)); +#97207 = CYLINDRICAL_SURFACE('',#97208,0.25); +#97208 = AXIS2_PLACEMENT_3D('',#97209,#97210,#97211); +#97209 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97210 = DIRECTION('',(-0.,1.,-0.)); +#97211 = DIRECTION('',(0.,0.,-1.)); +#97212 = ADVANCED_FACE('',(#97213),#97224,.T.); +#97213 = FACE_BOUND('',#97214,.T.); +#97214 = EDGE_LOOP('',(#97215,#97216,#97222,#97223)); +#97215 = ORIENTED_EDGE('',*,*,#97086,.T.); +#97216 = ORIENTED_EDGE('',*,*,#97217,.T.); +#97217 = EDGE_CURVE('',#97079,#97194,#97218,.T.); +#97218 = LINE('',#97219,#97220); +#97219 = CARTESIAN_POINT('',(-5.79,-2.655,0.5)); +#97220 = VECTOR('',#97221,1.); +#97221 = DIRECTION('',(1.,0.,0.)); +#97222 = ORIENTED_EDGE('',*,*,#97202,.F.); +#97223 = ORIENTED_EDGE('',*,*,#96996,.F.); +#97224 = PLANE('',#97225); +#97225 = AXIS2_PLACEMENT_3D('',#97226,#97227,#97228); +#97226 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#97227 = DIRECTION('',(-0.,0.,1.)); +#97228 = DIRECTION('',(1.,0.,0.)); +#97229 = ADVANCED_FACE('',(#97230),#97247,.F.); +#97230 = FACE_BOUND('',#97231,.F.); +#97231 = EDGE_LOOP('',(#97232,#97233,#97234,#97235,#97236,#97237,#97243, + #97244,#97245,#97246)); +#97232 = ORIENTED_EDGE('',*,*,#97078,.T.); +#97233 = ORIENTED_EDGE('',*,*,#97217,.T.); +#97234 = ORIENTED_EDGE('',*,*,#97193,.T.); +#97235 = ORIENTED_EDGE('',*,*,#97175,.T.); +#97236 = ORIENTED_EDGE('',*,*,#96919,.T.); +#97237 = ORIENTED_EDGE('',*,*,#97238,.F.); +#97238 = EDGE_CURVE('',#96717,#96920,#97239,.T.); +#97239 = LINE('',#97240,#97241); +#97240 = CARTESIAN_POINT('',(-4.24,-2.655,0.437372862773)); +#97241 = VECTOR('',#97242,1.); +#97242 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97243 = ORIENTED_EDGE('',*,*,#96716,.T.); +#97244 = ORIENTED_EDGE('',*,*,#97151,.T.); +#97245 = ORIENTED_EDGE('',*,*,#97133,.T.); +#97246 = ORIENTED_EDGE('',*,*,#97109,.T.); +#97247 = PLANE('',#97248); +#97248 = AXIS2_PLACEMENT_3D('',#97249,#97250,#97251); +#97249 = CARTESIAN_POINT('',(-4.091426690538,-2.655,0.874745725546)); +#97250 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97251 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97252 = ADVANCED_FACE('',(#97253),#97264,.T.); +#97253 = FACE_BOUND('',#97254,.T.); +#97254 = EDGE_LOOP('',(#97255,#97256,#97262,#97263)); +#97255 = ORIENTED_EDGE('',*,*,#96725,.F.); +#97256 = ORIENTED_EDGE('',*,*,#97257,.T.); +#97257 = EDGE_CURVE('',#96726,#96929,#97258,.T.); +#97258 = LINE('',#97259,#97260); +#97259 = CARTESIAN_POINT('',(-4.24,-2.775,0.437372862773)); +#97260 = VECTOR('',#97261,1.); +#97261 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97262 = ORIENTED_EDGE('',*,*,#96928,.T.); +#97263 = ORIENTED_EDGE('',*,*,#97238,.F.); +#97264 = PLANE('',#97265); +#97265 = AXIS2_PLACEMENT_3D('',#97266,#97267,#97268); +#97266 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#97267 = DIRECTION('',(-1.,0.,0.)); +#97268 = DIRECTION('',(0.,1.,0.)); +#97269 = ADVANCED_FACE('',(#97270),#97283,.F.); +#97270 = FACE_BOUND('',#97271,.F.); +#97271 = EDGE_LOOP('',(#97272,#97273,#97274,#97275,#97276,#97282)); +#97272 = ORIENTED_EDGE('',*,*,#96733,.T.); +#97273 = ORIENTED_EDGE('',*,*,#97257,.T.); +#97274 = ORIENTED_EDGE('',*,*,#96936,.T.); +#97275 = ORIENTED_EDGE('',*,*,#96846,.T.); +#97276 = ORIENTED_EDGE('',*,*,#97277,.T.); +#97277 = EDGE_CURVE('',#96847,#96791,#97278,.T.); +#97278 = LINE('',#97279,#97280); +#97279 = CARTESIAN_POINT('',(-3.49,-2.775,0.437372862773)); +#97280 = VECTOR('',#97281,1.); +#97281 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97282 = ORIENTED_EDGE('',*,*,#96798,.T.); +#97283 = PLANE('',#97284); +#97284 = AXIS2_PLACEMENT_3D('',#97285,#97286,#97287); +#97285 = CARTESIAN_POINT('',(-4.091426690538,-2.775,0.874745725546)); +#97286 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97287 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97288 = ADVANCED_FACE('',(#97289),#97300,.T.); +#97289 = FACE_BOUND('',#97290,.T.); +#97290 = EDGE_LOOP('',(#97291,#97297,#97298,#97299)); +#97291 = ORIENTED_EDGE('',*,*,#97292,.F.); +#97292 = EDGE_CURVE('',#96855,#96783,#97293,.T.); +#97293 = LINE('',#97294,#97295); +#97294 = CARTESIAN_POINT('',(-3.49,-2.655,0.437372862773)); +#97295 = VECTOR('',#97296,1.); +#97296 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97297 = ORIENTED_EDGE('',*,*,#96854,.F.); +#97298 = ORIENTED_EDGE('',*,*,#97277,.T.); +#97299 = ORIENTED_EDGE('',*,*,#96790,.F.); +#97300 = PLANE('',#97301); +#97301 = AXIS2_PLACEMENT_3D('',#97302,#97303,#97304); +#97302 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97303 = DIRECTION('',(1.,0.,-0.)); +#97304 = DIRECTION('',(0.,-1.,0.)); +#97305 = ADVANCED_FACE('',(#97306),#97312,.F.); +#97306 = FACE_BOUND('',#97307,.F.); +#97307 = EDGE_LOOP('',(#97308,#97309,#97310,#97311)); +#97308 = ORIENTED_EDGE('',*,*,#97292,.F.); +#97309 = ORIENTED_EDGE('',*,*,#96862,.T.); +#97310 = ORIENTED_EDGE('',*,*,#97054,.T.); +#97311 = ORIENTED_EDGE('',*,*,#96782,.T.); +#97312 = PLANE('',#97313); +#97313 = AXIS2_PLACEMENT_3D('',#97314,#97315,#97316); +#97314 = CARTESIAN_POINT('',(-4.091426690538,-2.655,0.874745725546)); +#97315 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97316 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97317 = MANIFOLD_SOLID_BREP('',#97318); +#97318 = CLOSED_SHELL('',(#97319,#97359,#97422,#97446,#97502,#97519, + #97536,#97553,#97570,#97587)); +#97319 = ADVANCED_FACE('',(#97320),#97354,.T.); +#97320 = FACE_BOUND('',#97321,.T.); +#97321 = EDGE_LOOP('',(#97322,#97332,#97340,#97348)); +#97322 = ORIENTED_EDGE('',*,*,#97323,.T.); +#97323 = EDGE_CURVE('',#97324,#97326,#97328,.T.); +#97324 = VERTEX_POINT('',#97325); +#97325 = CARTESIAN_POINT('',(-3.49,0.495,0.93988764291)); +#97326 = VERTEX_POINT('',#97327); +#97327 = CARTESIAN_POINT('',(-3.91,0.495,0.93988764291)); +#97328 = LINE('',#97329,#97330); +#97329 = CARTESIAN_POINT('',(-2.237701336216,0.495,0.93988764291)); +#97330 = VECTOR('',#97331,1.); +#97331 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97332 = ORIENTED_EDGE('',*,*,#97333,.T.); +#97333 = EDGE_CURVE('',#97326,#97334,#97336,.T.); +#97334 = VERTEX_POINT('',#97335); +#97335 = CARTESIAN_POINT('',(-3.91,0.495,1.43988764291)); +#97336 = LINE('',#97337,#97338); +#97337 = CARTESIAN_POINT('',(-3.91,0.495,0.)); +#97338 = VECTOR('',#97339,1.); +#97339 = DIRECTION('',(0.,0.,1.)); +#97340 = ORIENTED_EDGE('',*,*,#97341,.T.); +#97341 = EDGE_CURVE('',#97334,#97342,#97344,.T.); +#97342 = VERTEX_POINT('',#97343); +#97343 = CARTESIAN_POINT('',(-3.49,0.495,1.43988764291)); +#97344 = LINE('',#97345,#97346); +#97345 = CARTESIAN_POINT('',(-4.237701336216,0.495,1.43988764291)); +#97346 = VECTOR('',#97347,1.); +#97347 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97348 = ORIENTED_EDGE('',*,*,#97349,.T.); +#97349 = EDGE_CURVE('',#97342,#97324,#97350,.T.); +#97350 = LINE('',#97351,#97352); +#97351 = CARTESIAN_POINT('',(-3.49,0.495,0.437372862773)); +#97352 = VECTOR('',#97353,1.); +#97353 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97354 = PLANE('',#97355); +#97355 = AXIS2_PLACEMENT_3D('',#97356,#97357,#97358); +#97356 = CARTESIAN_POINT('',(-4.091426690538,0.495,0.874745725546)); +#97357 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97358 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97359 = ADVANCED_FACE('',(#97360),#97417,.T.); +#97360 = FACE_BOUND('',#97361,.T.); +#97361 = EDGE_LOOP('',(#97362,#97363,#97371,#97379,#97387,#97395,#97403, + #97411)); +#97362 = ORIENTED_EDGE('',*,*,#97323,.F.); +#97363 = ORIENTED_EDGE('',*,*,#97364,.T.); +#97364 = EDGE_CURVE('',#97324,#97365,#97367,.T.); +#97365 = VERTEX_POINT('',#97366); +#97366 = CARTESIAN_POINT('',(-3.49,0.375,0.93988764291)); +#97367 = LINE('',#97368,#97369); +#97368 = CARTESIAN_POINT('',(-3.49,1.8725,0.93988764291)); +#97369 = VECTOR('',#97370,1.); +#97370 = DIRECTION('',(0.,-1.,0.)); +#97371 = ORIENTED_EDGE('',*,*,#97372,.F.); +#97372 = EDGE_CURVE('',#97373,#97365,#97375,.T.); +#97373 = VERTEX_POINT('',#97374); +#97374 = CARTESIAN_POINT('',(-2.237701336216,0.375,0.93988764291)); +#97375 = LINE('',#97376,#97377); +#97376 = CARTESIAN_POINT('',(-2.237701336216,0.375,0.93988764291)); +#97377 = VECTOR('',#97378,1.); +#97378 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97379 = ORIENTED_EDGE('',*,*,#97380,.T.); +#97380 = EDGE_CURVE('',#97373,#97381,#97383,.T.); +#97381 = VERTEX_POINT('',#97382); +#97382 = CARTESIAN_POINT('',(-2.237701336216,-0.375,0.93988764291)); +#97383 = LINE('',#97384,#97385); +#97384 = CARTESIAN_POINT('',(-2.237701336216,0.375,0.93988764291)); +#97385 = VECTOR('',#97386,1.); +#97386 = DIRECTION('',(0.,-1.,0.)); +#97387 = ORIENTED_EDGE('',*,*,#97388,.T.); +#97388 = EDGE_CURVE('',#97381,#97389,#97391,.T.); +#97389 = VERTEX_POINT('',#97390); +#97390 = CARTESIAN_POINT('',(-3.49,-0.375,0.93988764291)); +#97391 = LINE('',#97392,#97393); +#97392 = CARTESIAN_POINT('',(-2.237701336216,-0.375,0.93988764291)); +#97393 = VECTOR('',#97394,1.); +#97394 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97395 = ORIENTED_EDGE('',*,*,#97396,.T.); +#97396 = EDGE_CURVE('',#97389,#97397,#97399,.T.); +#97397 = VERTEX_POINT('',#97398); +#97398 = CARTESIAN_POINT('',(-3.49,-0.495,0.93988764291)); +#97399 = LINE('',#97400,#97401); +#97400 = CARTESIAN_POINT('',(-3.49,1.8725,0.93988764291)); +#97401 = VECTOR('',#97402,1.); +#97402 = DIRECTION('',(0.,-1.,0.)); +#97403 = ORIENTED_EDGE('',*,*,#97404,.T.); +#97404 = EDGE_CURVE('',#97397,#97405,#97407,.T.); +#97405 = VERTEX_POINT('',#97406); +#97406 = CARTESIAN_POINT('',(-3.91,-0.495,0.93988764291)); +#97407 = LINE('',#97408,#97409); +#97408 = CARTESIAN_POINT('',(-2.237701336216,-0.495,0.93988764291)); +#97409 = VECTOR('',#97410,1.); +#97410 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97411 = ORIENTED_EDGE('',*,*,#97412,.T.); +#97412 = EDGE_CURVE('',#97405,#97326,#97413,.T.); +#97413 = LINE('',#97414,#97415); +#97414 = CARTESIAN_POINT('',(-3.91,5.551115123126E-17,0.93988764291)); +#97415 = VECTOR('',#97416,1.); +#97416 = DIRECTION('',(0.,1.,-0.)); +#97417 = PLANE('',#97418); +#97418 = AXIS2_PLACEMENT_3D('',#97419,#97420,#97421); +#97419 = CARTESIAN_POINT('',(-2.237701336216,0.495,0.93988764291)); +#97420 = DIRECTION('',(-1.110223024625E-16,-0.,-1.)); +#97421 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97422 = ADVANCED_FACE('',(#97423),#97441,.T.); +#97423 = FACE_BOUND('',#97424,.T.); +#97424 = EDGE_LOOP('',(#97425,#97426,#97434,#97440)); +#97425 = ORIENTED_EDGE('',*,*,#97349,.F.); +#97426 = ORIENTED_EDGE('',*,*,#97427,.F.); +#97427 = EDGE_CURVE('',#97428,#97342,#97430,.T.); +#97428 = VERTEX_POINT('',#97429); +#97429 = CARTESIAN_POINT('',(-3.49,0.375,1.43988764291)); +#97430 = LINE('',#97431,#97432); +#97431 = CARTESIAN_POINT('',(-3.49,1.8725,1.43988764291)); +#97432 = VECTOR('',#97433,1.); +#97433 = DIRECTION('',(-0.,1.,0.)); +#97434 = ORIENTED_EDGE('',*,*,#97435,.T.); +#97435 = EDGE_CURVE('',#97428,#97365,#97436,.T.); +#97436 = LINE('',#97437,#97438); +#97437 = CARTESIAN_POINT('',(-3.49,0.375,0.437372862773)); +#97438 = VECTOR('',#97439,1.); +#97439 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97440 = ORIENTED_EDGE('',*,*,#97364,.F.); +#97441 = PLANE('',#97442); +#97442 = AXIS2_PLACEMENT_3D('',#97443,#97444,#97445); +#97443 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97444 = DIRECTION('',(1.,0.,-0.)); +#97445 = DIRECTION('',(0.,-1.,0.)); +#97446 = ADVANCED_FACE('',(#97447),#97497,.T.); +#97447 = FACE_BOUND('',#97448,.T.); +#97448 = EDGE_LOOP('',(#97449,#97450,#97458,#97466,#97474,#97482,#97490, + #97496)); +#97449 = ORIENTED_EDGE('',*,*,#97341,.F.); +#97450 = ORIENTED_EDGE('',*,*,#97451,.T.); +#97451 = EDGE_CURVE('',#97334,#97452,#97454,.T.); +#97452 = VERTEX_POINT('',#97453); +#97453 = CARTESIAN_POINT('',(-3.91,-0.495,1.43988764291)); +#97454 = LINE('',#97455,#97456); +#97455 = CARTESIAN_POINT('',(-3.91,5.551115123126E-17,1.43988764291)); +#97456 = VECTOR('',#97457,1.); +#97457 = DIRECTION('',(0.,-1.,0.)); +#97458 = ORIENTED_EDGE('',*,*,#97459,.T.); +#97459 = EDGE_CURVE('',#97452,#97460,#97462,.T.); +#97460 = VERTEX_POINT('',#97461); +#97461 = CARTESIAN_POINT('',(-3.49,-0.495,1.43988764291)); +#97462 = LINE('',#97463,#97464); +#97463 = CARTESIAN_POINT('',(-4.237701336216,-0.495,1.43988764291)); +#97464 = VECTOR('',#97465,1.); +#97465 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97466 = ORIENTED_EDGE('',*,*,#97467,.T.); +#97467 = EDGE_CURVE('',#97460,#97468,#97470,.T.); +#97468 = VERTEX_POINT('',#97469); +#97469 = CARTESIAN_POINT('',(-3.49,-0.375,1.43988764291)); +#97470 = LINE('',#97471,#97472); +#97471 = CARTESIAN_POINT('',(-3.49,1.8725,1.43988764291)); +#97472 = VECTOR('',#97473,1.); +#97473 = DIRECTION('',(-0.,1.,0.)); +#97474 = ORIENTED_EDGE('',*,*,#97475,.T.); +#97475 = EDGE_CURVE('',#97468,#97476,#97478,.T.); +#97476 = VERTEX_POINT('',#97477); +#97477 = CARTESIAN_POINT('',(-2.237701336216,-0.375,1.43988764291)); +#97478 = LINE('',#97479,#97480); +#97479 = CARTESIAN_POINT('',(-4.237701336216,-0.375,1.43988764291)); +#97480 = VECTOR('',#97481,1.); +#97481 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97482 = ORIENTED_EDGE('',*,*,#97483,.F.); +#97483 = EDGE_CURVE('',#97484,#97476,#97486,.T.); +#97484 = VERTEX_POINT('',#97485); +#97485 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97486 = LINE('',#97487,#97488); +#97487 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97488 = VECTOR('',#97489,1.); +#97489 = DIRECTION('',(0.,-1.,0.)); +#97490 = ORIENTED_EDGE('',*,*,#97491,.F.); +#97491 = EDGE_CURVE('',#97428,#97484,#97492,.T.); +#97492 = LINE('',#97493,#97494); +#97493 = CARTESIAN_POINT('',(-4.237701336216,0.375,1.43988764291)); +#97494 = VECTOR('',#97495,1.); +#97495 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97496 = ORIENTED_EDGE('',*,*,#97427,.T.); +#97497 = PLANE('',#97498); +#97498 = AXIS2_PLACEMENT_3D('',#97499,#97500,#97501); +#97499 = CARTESIAN_POINT('',(-4.237701336216,0.495,1.43988764291)); +#97500 = DIRECTION('',(1.110223024625E-16,0.,1.)); +#97501 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97502 = ADVANCED_FACE('',(#97503),#97514,.T.); +#97503 = FACE_BOUND('',#97504,.T.); +#97504 = EDGE_LOOP('',(#97505,#97506,#97512,#97513)); +#97505 = ORIENTED_EDGE('',*,*,#97412,.F.); +#97506 = ORIENTED_EDGE('',*,*,#97507,.T.); +#97507 = EDGE_CURVE('',#97405,#97452,#97508,.T.); +#97508 = LINE('',#97509,#97510); +#97509 = CARTESIAN_POINT('',(-3.91,-0.495,0.)); +#97510 = VECTOR('',#97511,1.); +#97511 = DIRECTION('',(0.,0.,1.)); +#97512 = ORIENTED_EDGE('',*,*,#97451,.F.); +#97513 = ORIENTED_EDGE('',*,*,#97333,.F.); +#97514 = PLANE('',#97515); +#97515 = AXIS2_PLACEMENT_3D('',#97516,#97517,#97518); +#97516 = CARTESIAN_POINT('',(-3.91,-0.495,0.)); +#97517 = DIRECTION('',(-1.,0.,0.)); +#97518 = DIRECTION('',(0.,1.,0.)); +#97519 = ADVANCED_FACE('',(#97520),#97531,.F.); +#97520 = FACE_BOUND('',#97521,.F.); +#97521 = EDGE_LOOP('',(#97522,#97523,#97524,#97525)); +#97522 = ORIENTED_EDGE('',*,*,#97404,.T.); +#97523 = ORIENTED_EDGE('',*,*,#97507,.T.); +#97524 = ORIENTED_EDGE('',*,*,#97459,.T.); +#97525 = ORIENTED_EDGE('',*,*,#97526,.T.); +#97526 = EDGE_CURVE('',#97460,#97397,#97527,.T.); +#97527 = LINE('',#97528,#97529); +#97528 = CARTESIAN_POINT('',(-3.49,-0.495,0.437372862773)); +#97529 = VECTOR('',#97530,1.); +#97530 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97531 = PLANE('',#97532); +#97532 = AXIS2_PLACEMENT_3D('',#97533,#97534,#97535); +#97533 = CARTESIAN_POINT('',(-4.091426690538,-0.495,0.874745725546)); +#97534 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97535 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97536 = ADVANCED_FACE('',(#97537),#97548,.T.); +#97537 = FACE_BOUND('',#97538,.T.); +#97538 = EDGE_LOOP('',(#97539,#97545,#97546,#97547)); +#97539 = ORIENTED_EDGE('',*,*,#97540,.F.); +#97540 = EDGE_CURVE('',#97468,#97389,#97541,.T.); +#97541 = LINE('',#97542,#97543); +#97542 = CARTESIAN_POINT('',(-3.49,-0.375,0.437372862773)); +#97543 = VECTOR('',#97544,1.); +#97544 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97545 = ORIENTED_EDGE('',*,*,#97467,.F.); +#97546 = ORIENTED_EDGE('',*,*,#97526,.T.); +#97547 = ORIENTED_EDGE('',*,*,#97396,.F.); +#97548 = PLANE('',#97549); +#97549 = AXIS2_PLACEMENT_3D('',#97550,#97551,#97552); +#97550 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97551 = DIRECTION('',(1.,0.,-0.)); +#97552 = DIRECTION('',(0.,-1.,0.)); +#97553 = ADVANCED_FACE('',(#97554),#97565,.F.); +#97554 = FACE_BOUND('',#97555,.F.); +#97555 = EDGE_LOOP('',(#97556,#97557,#97558,#97564)); +#97556 = ORIENTED_EDGE('',*,*,#97540,.F.); +#97557 = ORIENTED_EDGE('',*,*,#97475,.T.); +#97558 = ORIENTED_EDGE('',*,*,#97559,.T.); +#97559 = EDGE_CURVE('',#97476,#97381,#97560,.T.); +#97560 = LINE('',#97561,#97562); +#97561 = CARTESIAN_POINT('',(-2.237701336216,-0.375,1.43988764291)); +#97562 = VECTOR('',#97563,1.); +#97563 = DIRECTION('',(0.,0.,-1.)); +#97564 = ORIENTED_EDGE('',*,*,#97388,.T.); +#97565 = PLANE('',#97566); +#97566 = AXIS2_PLACEMENT_3D('',#97567,#97568,#97569); +#97567 = CARTESIAN_POINT('',(-4.091426690538,-0.375,0.874745725546)); +#97568 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97569 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97570 = ADVANCED_FACE('',(#97571),#97582,.T.); +#97571 = FACE_BOUND('',#97572,.T.); +#97572 = EDGE_LOOP('',(#97573,#97574,#97575,#97576)); +#97573 = ORIENTED_EDGE('',*,*,#97483,.T.); +#97574 = ORIENTED_EDGE('',*,*,#97559,.T.); +#97575 = ORIENTED_EDGE('',*,*,#97380,.F.); +#97576 = ORIENTED_EDGE('',*,*,#97577,.F.); +#97577 = EDGE_CURVE('',#97484,#97373,#97578,.T.); +#97578 = LINE('',#97579,#97580); +#97579 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97580 = VECTOR('',#97581,1.); +#97581 = DIRECTION('',(0.,0.,-1.)); +#97582 = PLANE('',#97583); +#97583 = AXIS2_PLACEMENT_3D('',#97584,#97585,#97586); +#97584 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97585 = DIRECTION('',(1.,0.,0.)); +#97586 = DIRECTION('',(0.,0.,-1.)); +#97587 = ADVANCED_FACE('',(#97588),#97594,.T.); +#97588 = FACE_BOUND('',#97589,.T.); +#97589 = EDGE_LOOP('',(#97590,#97591,#97592,#97593)); +#97590 = ORIENTED_EDGE('',*,*,#97435,.F.); +#97591 = ORIENTED_EDGE('',*,*,#97491,.T.); +#97592 = ORIENTED_EDGE('',*,*,#97577,.T.); +#97593 = ORIENTED_EDGE('',*,*,#97372,.T.); +#97594 = PLANE('',#97595); +#97595 = AXIS2_PLACEMENT_3D('',#97596,#97597,#97598); +#97596 = CARTESIAN_POINT('',(-4.091426690538,0.375,0.874745725546)); +#97597 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97598 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97599 = MANIFOLD_SOLID_BREP('',#97600); +#97600 = CLOSED_SHELL('',(#97601,#97659,#97725,#97781,#97805,#97861, + #97920,#97937,#97954,#98021,#98038,#98069,#98093,#98118,#98135, + #98159,#98184,#98201,#98224,#98241,#98260,#98277)); +#97601 = ADVANCED_FACE('',(#97602),#97654,.T.); +#97602 = FACE_BOUND('',#97603,.T.); +#97603 = EDGE_LOOP('',(#97604,#97615,#97623,#97632,#97640,#97648)); +#97604 = ORIENTED_EDGE('',*,*,#97605,.T.); +#97605 = EDGE_CURVE('',#97606,#97608,#97610,.T.); +#97606 = VERTEX_POINT('',#97607); +#97607 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.93988764291)); +#97608 = VERTEX_POINT('',#97609); +#97609 = CARTESIAN_POINT('',(-4.24,2.775,0.939877074976)); +#97610 = CIRCLE('',#97611,0.25); +#97611 = AXIS2_PLACEMENT_3D('',#97612,#97613,#97614); +#97612 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97613 = DIRECTION('',(0.,-1.,0.)); +#97614 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97615 = ORIENTED_EDGE('',*,*,#97616,.T.); +#97616 = EDGE_CURVE('',#97608,#97617,#97619,.T.); +#97617 = VERTEX_POINT('',#97618); +#97618 = CARTESIAN_POINT('',(-4.24,2.775,1.439884120332)); +#97619 = LINE('',#97620,#97621); +#97620 = CARTESIAN_POINT('',(-4.24,2.775,0.437372862773)); +#97621 = VECTOR('',#97622,1.); +#97622 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97623 = ORIENTED_EDGE('',*,*,#97624,.T.); +#97624 = EDGE_CURVE('',#97617,#97625,#97627,.T.); +#97625 = VERTEX_POINT('',#97626); +#97626 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97627 = CIRCLE('',#97628,0.75); +#97628 = AXIS2_PLACEMENT_3D('',#97629,#97630,#97631); +#97629 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97630 = DIRECTION('',(0.,1.,0.)); +#97631 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97632 = ORIENTED_EDGE('',*,*,#97633,.T.); +#97633 = EDGE_CURVE('',#97625,#97634,#97636,.T.); +#97634 = VERTEX_POINT('',#97635); +#97635 = CARTESIAN_POINT('',(-3.49,2.775,1.43988764291)); +#97636 = LINE('',#97637,#97638); +#97637 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97638 = VECTOR('',#97639,1.); +#97639 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97640 = ORIENTED_EDGE('',*,*,#97641,.T.); +#97641 = EDGE_CURVE('',#97634,#97642,#97644,.T.); +#97642 = VERTEX_POINT('',#97643); +#97643 = CARTESIAN_POINT('',(-3.49,2.775,0.93988764291)); +#97644 = LINE('',#97645,#97646); +#97645 = CARTESIAN_POINT('',(-3.49,2.775,0.437372862773)); +#97646 = VECTOR('',#97647,1.); +#97647 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97648 = ORIENTED_EDGE('',*,*,#97649,.T.); +#97649 = EDGE_CURVE('',#97642,#97606,#97650,.T.); +#97650 = LINE('',#97651,#97652); +#97651 = CARTESIAN_POINT('',(-2.237701336216,2.775,0.93988764291)); +#97652 = VECTOR('',#97653,1.); +#97653 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97654 = PLANE('',#97655); +#97655 = AXIS2_PLACEMENT_3D('',#97656,#97657,#97658); +#97656 = CARTESIAN_POINT('',(-4.091426690538,2.775,0.874745725546)); +#97657 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97658 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97659 = ADVANCED_FACE('',(#97660),#97720,.F.); +#97660 = FACE_BOUND('',#97661,.F.); +#97661 = EDGE_LOOP('',(#97662,#97670,#97679,#97687,#97696,#97704,#97713, + #97719)); +#97662 = ORIENTED_EDGE('',*,*,#97663,.F.); +#97663 = EDGE_CURVE('',#97664,#97608,#97666,.T.); +#97664 = VERTEX_POINT('',#97665); +#97665 = CARTESIAN_POINT('',(-4.24,2.655,0.939877074976)); +#97666 = LINE('',#97667,#97668); +#97667 = CARTESIAN_POINT('',(-4.24,2.775,0.939877074976)); +#97668 = VECTOR('',#97669,1.); +#97669 = DIRECTION('',(-0.,1.,-0.)); +#97670 = ORIENTED_EDGE('',*,*,#97671,.T.); +#97671 = EDGE_CURVE('',#97664,#97672,#97674,.T.); +#97672 = VERTEX_POINT('',#97673); +#97673 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#97674 = CIRCLE('',#97675,0.25); +#97675 = AXIS2_PLACEMENT_3D('',#97676,#97677,#97678); +#97676 = CARTESIAN_POINT('',(-4.237701336216,2.655,0.68988764291)); +#97677 = DIRECTION('',(0.,-1.,0.)); +#97678 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97679 = ORIENTED_EDGE('',*,*,#97680,.T.); +#97680 = EDGE_CURVE('',#97672,#97681,#97683,.T.); +#97681 = VERTEX_POINT('',#97682); +#97682 = CARTESIAN_POINT('',(-4.472624491413,1.905,0.775392678742)); +#97683 = LINE('',#97684,#97685); +#97684 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#97685 = VECTOR('',#97686,1.); +#97686 = DIRECTION('',(0.,-1.,0.)); +#97687 = ORIENTED_EDGE('',*,*,#97688,.F.); +#97688 = EDGE_CURVE('',#97689,#97681,#97691,.T.); +#97689 = VERTEX_POINT('',#97690); +#97690 = CARTESIAN_POINT('',(-4.24,1.905,0.939877074976)); +#97691 = CIRCLE('',#97692,0.25); +#97692 = AXIS2_PLACEMENT_3D('',#97693,#97694,#97695); +#97693 = CARTESIAN_POINT('',(-4.237701336216,1.905,0.68988764291)); +#97694 = DIRECTION('',(0.,-1.,0.)); +#97695 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97696 = ORIENTED_EDGE('',*,*,#97697,.F.); +#97697 = EDGE_CURVE('',#97698,#97689,#97700,.T.); +#97698 = VERTEX_POINT('',#97699); +#97699 = CARTESIAN_POINT('',(-4.24,1.785,0.939877074976)); +#97700 = LINE('',#97701,#97702); +#97701 = CARTESIAN_POINT('',(-4.24,2.775,0.939877074976)); +#97702 = VECTOR('',#97703,1.); +#97703 = DIRECTION('',(-0.,1.,-0.)); +#97704 = ORIENTED_EDGE('',*,*,#97705,.F.); +#97705 = EDGE_CURVE('',#97706,#97698,#97708,.T.); +#97706 = VERTEX_POINT('',#97707); +#97707 = CARTESIAN_POINT('',(-4.237701336216,1.785,0.93988764291)); +#97708 = CIRCLE('',#97709,0.25); +#97709 = AXIS2_PLACEMENT_3D('',#97710,#97711,#97712); +#97710 = CARTESIAN_POINT('',(-4.237701336216,1.785,0.68988764291)); +#97711 = DIRECTION('',(0.,-1.,0.)); +#97712 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97713 = ORIENTED_EDGE('',*,*,#97714,.F.); +#97714 = EDGE_CURVE('',#97606,#97706,#97715,.T.); +#97715 = LINE('',#97716,#97717); +#97716 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.93988764291)); +#97717 = VECTOR('',#97718,1.); +#97718 = DIRECTION('',(0.,-1.,0.)); +#97719 = ORIENTED_EDGE('',*,*,#97605,.T.); +#97720 = CYLINDRICAL_SURFACE('',#97721,0.25); +#97721 = AXIS2_PLACEMENT_3D('',#97722,#97723,#97724); +#97722 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97723 = DIRECTION('',(-0.,1.,-0.)); +#97724 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97725 = ADVANCED_FACE('',(#97726),#97776,.T.); +#97726 = FACE_BOUND('',#97727,.T.); +#97727 = EDGE_LOOP('',(#97728,#97729,#97737,#97745,#97753,#97761,#97769, + #97775)); +#97728 = ORIENTED_EDGE('',*,*,#97649,.F.); +#97729 = ORIENTED_EDGE('',*,*,#97730,.T.); +#97730 = EDGE_CURVE('',#97642,#97731,#97733,.T.); +#97731 = VERTEX_POINT('',#97732); +#97732 = CARTESIAN_POINT('',(-3.49,2.655,0.93988764291)); +#97733 = LINE('',#97734,#97735); +#97734 = CARTESIAN_POINT('',(-3.49,3.0125,0.93988764291)); +#97735 = VECTOR('',#97736,1.); +#97736 = DIRECTION('',(0.,-1.,0.)); +#97737 = ORIENTED_EDGE('',*,*,#97738,.F.); +#97738 = EDGE_CURVE('',#97739,#97731,#97741,.T.); +#97739 = VERTEX_POINT('',#97740); +#97740 = CARTESIAN_POINT('',(-2.237701336216,2.655,0.93988764291)); +#97741 = LINE('',#97742,#97743); +#97742 = CARTESIAN_POINT('',(-2.237701336216,2.655,0.93988764291)); +#97743 = VECTOR('',#97744,1.); +#97744 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97745 = ORIENTED_EDGE('',*,*,#97746,.T.); +#97746 = EDGE_CURVE('',#97739,#97747,#97749,.T.); +#97747 = VERTEX_POINT('',#97748); +#97748 = CARTESIAN_POINT('',(-2.237701336216,1.905,0.93988764291)); +#97749 = LINE('',#97750,#97751); +#97750 = CARTESIAN_POINT('',(-2.237701336216,2.655,0.93988764291)); +#97751 = VECTOR('',#97752,1.); +#97752 = DIRECTION('',(0.,-1.,0.)); +#97753 = ORIENTED_EDGE('',*,*,#97754,.T.); +#97754 = EDGE_CURVE('',#97747,#97755,#97757,.T.); +#97755 = VERTEX_POINT('',#97756); +#97756 = CARTESIAN_POINT('',(-3.49,1.905,0.93988764291)); +#97757 = LINE('',#97758,#97759); +#97758 = CARTESIAN_POINT('',(-2.237701336216,1.905,0.93988764291)); +#97759 = VECTOR('',#97760,1.); +#97760 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97761 = ORIENTED_EDGE('',*,*,#97762,.T.); +#97762 = EDGE_CURVE('',#97755,#97763,#97765,.T.); +#97763 = VERTEX_POINT('',#97764); +#97764 = CARTESIAN_POINT('',(-3.49,1.785,0.93988764291)); +#97765 = LINE('',#97766,#97767); +#97766 = CARTESIAN_POINT('',(-3.49,3.0125,0.93988764291)); +#97767 = VECTOR('',#97768,1.); +#97768 = DIRECTION('',(0.,-1.,0.)); +#97769 = ORIENTED_EDGE('',*,*,#97770,.T.); +#97770 = EDGE_CURVE('',#97763,#97706,#97771,.T.); +#97771 = LINE('',#97772,#97773); +#97772 = CARTESIAN_POINT('',(-2.237701336216,1.785,0.93988764291)); +#97773 = VECTOR('',#97774,1.); +#97774 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97775 = ORIENTED_EDGE('',*,*,#97714,.F.); +#97776 = PLANE('',#97777); +#97777 = AXIS2_PLACEMENT_3D('',#97778,#97779,#97780); +#97778 = CARTESIAN_POINT('',(-2.237701336216,2.775,0.93988764291)); +#97779 = DIRECTION('',(-1.110223024625E-16,-0.,-1.)); +#97780 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97781 = ADVANCED_FACE('',(#97782),#97800,.T.); +#97782 = FACE_BOUND('',#97783,.T.); +#97783 = EDGE_LOOP('',(#97784,#97785,#97793,#97799)); +#97784 = ORIENTED_EDGE('',*,*,#97641,.F.); +#97785 = ORIENTED_EDGE('',*,*,#97786,.F.); +#97786 = EDGE_CURVE('',#97787,#97634,#97789,.T.); +#97787 = VERTEX_POINT('',#97788); +#97788 = CARTESIAN_POINT('',(-3.49,2.655,1.43988764291)); +#97789 = LINE('',#97790,#97791); +#97790 = CARTESIAN_POINT('',(-3.49,3.0125,1.43988764291)); +#97791 = VECTOR('',#97792,1.); +#97792 = DIRECTION('',(-0.,1.,0.)); +#97793 = ORIENTED_EDGE('',*,*,#97794,.T.); +#97794 = EDGE_CURVE('',#97787,#97731,#97795,.T.); +#97795 = LINE('',#97796,#97797); +#97796 = CARTESIAN_POINT('',(-3.49,2.655,0.437372862773)); +#97797 = VECTOR('',#97798,1.); +#97798 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97799 = ORIENTED_EDGE('',*,*,#97730,.F.); +#97800 = PLANE('',#97801); +#97801 = AXIS2_PLACEMENT_3D('',#97802,#97803,#97804); +#97802 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97803 = DIRECTION('',(1.,0.,-0.)); +#97804 = DIRECTION('',(0.,-1.,0.)); +#97805 = ADVANCED_FACE('',(#97806),#97856,.T.); +#97806 = FACE_BOUND('',#97807,.T.); +#97807 = EDGE_LOOP('',(#97808,#97809,#97817,#97825,#97833,#97841,#97849, + #97855)); +#97808 = ORIENTED_EDGE('',*,*,#97633,.F.); +#97809 = ORIENTED_EDGE('',*,*,#97810,.T.); +#97810 = EDGE_CURVE('',#97625,#97811,#97813,.T.); +#97811 = VERTEX_POINT('',#97812); +#97812 = CARTESIAN_POINT('',(-4.237701336216,1.785,1.43988764291)); +#97813 = LINE('',#97814,#97815); +#97814 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97815 = VECTOR('',#97816,1.); +#97816 = DIRECTION('',(0.,-1.,0.)); +#97817 = ORIENTED_EDGE('',*,*,#97818,.T.); +#97818 = EDGE_CURVE('',#97811,#97819,#97821,.T.); +#97819 = VERTEX_POINT('',#97820); +#97820 = CARTESIAN_POINT('',(-3.49,1.785,1.43988764291)); +#97821 = LINE('',#97822,#97823); +#97822 = CARTESIAN_POINT('',(-4.237701336216,1.785,1.43988764291)); +#97823 = VECTOR('',#97824,1.); +#97824 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97825 = ORIENTED_EDGE('',*,*,#97826,.T.); +#97826 = EDGE_CURVE('',#97819,#97827,#97829,.T.); +#97827 = VERTEX_POINT('',#97828); +#97828 = CARTESIAN_POINT('',(-3.49,1.905,1.43988764291)); +#97829 = LINE('',#97830,#97831); +#97830 = CARTESIAN_POINT('',(-3.49,3.0125,1.43988764291)); +#97831 = VECTOR('',#97832,1.); +#97832 = DIRECTION('',(-0.,1.,0.)); +#97833 = ORIENTED_EDGE('',*,*,#97834,.T.); +#97834 = EDGE_CURVE('',#97827,#97835,#97837,.T.); +#97835 = VERTEX_POINT('',#97836); +#97836 = CARTESIAN_POINT('',(-2.237701336216,1.905,1.43988764291)); +#97837 = LINE('',#97838,#97839); +#97838 = CARTESIAN_POINT('',(-4.237701336216,1.905,1.43988764291)); +#97839 = VECTOR('',#97840,1.); +#97840 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97841 = ORIENTED_EDGE('',*,*,#97842,.F.); +#97842 = EDGE_CURVE('',#97843,#97835,#97845,.T.); +#97843 = VERTEX_POINT('',#97844); +#97844 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#97845 = LINE('',#97846,#97847); +#97846 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#97847 = VECTOR('',#97848,1.); +#97848 = DIRECTION('',(0.,-1.,0.)); +#97849 = ORIENTED_EDGE('',*,*,#97850,.F.); +#97850 = EDGE_CURVE('',#97787,#97843,#97851,.T.); +#97851 = LINE('',#97852,#97853); +#97852 = CARTESIAN_POINT('',(-4.237701336216,2.655,1.43988764291)); +#97853 = VECTOR('',#97854,1.); +#97854 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97855 = ORIENTED_EDGE('',*,*,#97786,.T.); +#97856 = PLANE('',#97857); +#97857 = AXIS2_PLACEMENT_3D('',#97858,#97859,#97860); +#97858 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97859 = DIRECTION('',(1.110223024625E-16,0.,1.)); +#97860 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97861 = ADVANCED_FACE('',(#97862),#97915,.T.); +#97862 = FACE_BOUND('',#97863,.T.); +#97863 = EDGE_LOOP('',(#97864,#97865,#97873,#97882,#97890,#97899,#97907, + #97914)); +#97864 = ORIENTED_EDGE('',*,*,#97624,.F.); +#97865 = ORIENTED_EDGE('',*,*,#97866,.F.); +#97866 = EDGE_CURVE('',#97867,#97617,#97869,.T.); +#97867 = VERTEX_POINT('',#97868); +#97868 = CARTESIAN_POINT('',(-4.24,2.655,1.439884120332)); +#97869 = LINE('',#97870,#97871); +#97870 = CARTESIAN_POINT('',(-4.24,2.775,1.439884120332)); +#97871 = VECTOR('',#97872,1.); +#97872 = DIRECTION('',(0.,1.,0.)); +#97873 = ORIENTED_EDGE('',*,*,#97874,.F.); +#97874 = EDGE_CURVE('',#97875,#97867,#97877,.T.); +#97875 = VERTEX_POINT('',#97876); +#97876 = CARTESIAN_POINT('',(-4.942470801806,2.655,0.946402750404)); +#97877 = CIRCLE('',#97878,0.75); +#97878 = AXIS2_PLACEMENT_3D('',#97879,#97880,#97881); +#97879 = CARTESIAN_POINT('',(-4.237701336216,2.655,0.68988764291)); +#97880 = DIRECTION('',(0.,1.,0.)); +#97881 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97882 = ORIENTED_EDGE('',*,*,#97883,.T.); +#97883 = EDGE_CURVE('',#97875,#97884,#97886,.T.); +#97884 = VERTEX_POINT('',#97885); +#97885 = CARTESIAN_POINT('',(-4.942470801806,1.905,0.946402750404)); +#97886 = LINE('',#97887,#97888); +#97887 = CARTESIAN_POINT('',(-4.942470801806,2.655,0.946402750404)); +#97888 = VECTOR('',#97889,1.); +#97889 = DIRECTION('',(0.,-1.,0.)); +#97890 = ORIENTED_EDGE('',*,*,#97891,.T.); +#97891 = EDGE_CURVE('',#97884,#97892,#97894,.T.); +#97892 = VERTEX_POINT('',#97893); +#97893 = CARTESIAN_POINT('',(-4.24,1.905,1.439884120332)); +#97894 = CIRCLE('',#97895,0.75); +#97895 = AXIS2_PLACEMENT_3D('',#97896,#97897,#97898); +#97896 = CARTESIAN_POINT('',(-4.237701336216,1.905,0.68988764291)); +#97897 = DIRECTION('',(0.,1.,0.)); +#97898 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97899 = ORIENTED_EDGE('',*,*,#97900,.F.); +#97900 = EDGE_CURVE('',#97901,#97892,#97903,.T.); +#97901 = VERTEX_POINT('',#97902); +#97902 = CARTESIAN_POINT('',(-4.24,1.785,1.439884120332)); +#97903 = LINE('',#97904,#97905); +#97904 = CARTESIAN_POINT('',(-4.24,2.775,1.439884120332)); +#97905 = VECTOR('',#97906,1.); +#97906 = DIRECTION('',(0.,1.,0.)); +#97907 = ORIENTED_EDGE('',*,*,#97908,.T.); +#97908 = EDGE_CURVE('',#97901,#97811,#97909,.T.); +#97909 = CIRCLE('',#97910,0.75); +#97910 = AXIS2_PLACEMENT_3D('',#97911,#97912,#97913); +#97911 = CARTESIAN_POINT('',(-4.237701336216,1.785,0.68988764291)); +#97912 = DIRECTION('',(0.,1.,0.)); +#97913 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97914 = ORIENTED_EDGE('',*,*,#97810,.F.); +#97915 = CYLINDRICAL_SURFACE('',#97916,0.75); +#97916 = AXIS2_PLACEMENT_3D('',#97917,#97918,#97919); +#97917 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97918 = DIRECTION('',(0.,1.,0.)); +#97919 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97920 = ADVANCED_FACE('',(#97921),#97932,.T.); +#97921 = FACE_BOUND('',#97922,.T.); +#97922 = EDGE_LOOP('',(#97923,#97924,#97925,#97931)); +#97923 = ORIENTED_EDGE('',*,*,#97616,.F.); +#97924 = ORIENTED_EDGE('',*,*,#97663,.F.); +#97925 = ORIENTED_EDGE('',*,*,#97926,.T.); +#97926 = EDGE_CURVE('',#97664,#97867,#97927,.T.); +#97927 = LINE('',#97928,#97929); +#97928 = CARTESIAN_POINT('',(-4.24,2.655,0.437372862773)); +#97929 = VECTOR('',#97930,1.); +#97930 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97931 = ORIENTED_EDGE('',*,*,#97866,.T.); +#97932 = PLANE('',#97933); +#97933 = AXIS2_PLACEMENT_3D('',#97934,#97935,#97936); +#97934 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#97935 = DIRECTION('',(-1.,0.,0.)); +#97936 = DIRECTION('',(0.,1.,0.)); +#97937 = ADVANCED_FACE('',(#97938),#97949,.T.); +#97938 = FACE_BOUND('',#97939,.T.); +#97939 = EDGE_LOOP('',(#97940,#97941,#97942,#97948)); +#97940 = ORIENTED_EDGE('',*,*,#97794,.F.); +#97941 = ORIENTED_EDGE('',*,*,#97850,.T.); +#97942 = ORIENTED_EDGE('',*,*,#97943,.T.); +#97943 = EDGE_CURVE('',#97843,#97739,#97944,.T.); +#97944 = LINE('',#97945,#97946); +#97945 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#97946 = VECTOR('',#97947,1.); +#97947 = DIRECTION('',(0.,0.,-1.)); +#97948 = ORIENTED_EDGE('',*,*,#97738,.T.); +#97949 = PLANE('',#97950); +#97950 = AXIS2_PLACEMENT_3D('',#97951,#97952,#97953); +#97951 = CARTESIAN_POINT('',(-4.091426690538,2.655,0.874745725546)); +#97952 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97953 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97954 = ADVANCED_FACE('',(#97955),#98016,.T.); +#97955 = FACE_BOUND('',#97956,.T.); +#97956 = EDGE_LOOP('',(#97957,#97967,#97975,#97984,#97990,#97991,#97992, + #97993,#98001,#98010)); +#97957 = ORIENTED_EDGE('',*,*,#97958,.T.); +#97958 = EDGE_CURVE('',#97959,#97961,#97963,.T.); +#97959 = VERTEX_POINT('',#97960); +#97960 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#97961 = VERTEX_POINT('',#97962); +#97962 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#97963 = LINE('',#97964,#97965); +#97964 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#97965 = VECTOR('',#97966,1.); +#97966 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#97967 = ORIENTED_EDGE('',*,*,#97968,.T.); +#97968 = EDGE_CURVE('',#97961,#97969,#97971,.T.); +#97969 = VERTEX_POINT('',#97970); +#97970 = CARTESIAN_POINT('',(-5.28,2.655,0.5)); +#97971 = LINE('',#97972,#97973); +#97972 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#97973 = VECTOR('',#97974,1.); +#97974 = DIRECTION('',(1.,0.,0.)); +#97975 = ORIENTED_EDGE('',*,*,#97976,.T.); +#97976 = EDGE_CURVE('',#97969,#97977,#97979,.T.); +#97977 = VERTEX_POINT('',#97978); +#97978 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#97979 = CIRCLE('',#97980,0.25); +#97980 = AXIS2_PLACEMENT_3D('',#97981,#97982,#97983); +#97981 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#97982 = DIRECTION('',(0.,-1.,0.)); +#97983 = DIRECTION('',(0.,0.,-1.)); +#97984 = ORIENTED_EDGE('',*,*,#97985,.T.); +#97985 = EDGE_CURVE('',#97977,#97875,#97986,.T.); +#97986 = LINE('',#97987,#97988); +#97987 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#97988 = VECTOR('',#97989,1.); +#97989 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97990 = ORIENTED_EDGE('',*,*,#97874,.T.); +#97991 = ORIENTED_EDGE('',*,*,#97926,.F.); +#97992 = ORIENTED_EDGE('',*,*,#97671,.T.); +#97993 = ORIENTED_EDGE('',*,*,#97994,.T.); +#97994 = EDGE_CURVE('',#97672,#97995,#97997,.T.); +#97995 = VERTEX_POINT('',#97996); +#97996 = CARTESIAN_POINT('',(-4.575230534411,2.655,0.493484892506)); +#97997 = LINE('',#97998,#97999); +#97998 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#97999 = VECTOR('',#98000,1.); +#98000 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#98001 = ORIENTED_EDGE('',*,*,#98002,.T.); +#98002 = EDGE_CURVE('',#97995,#98003,#98005,.T.); +#98003 = VERTEX_POINT('',#98004); +#98004 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98005 = CIRCLE('',#98006,0.75); +#98006 = AXIS2_PLACEMENT_3D('',#98007,#98008,#98009); +#98007 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#98008 = DIRECTION('',(0.,1.,0.)); +#98009 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98010 = ORIENTED_EDGE('',*,*,#98011,.T.); +#98011 = EDGE_CURVE('',#98003,#97959,#98012,.T.); +#98012 = LINE('',#98013,#98014); +#98013 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98014 = VECTOR('',#98015,1.); +#98015 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#98016 = PLANE('',#98017); +#98017 = AXIS2_PLACEMENT_3D('',#98018,#98019,#98020); +#98018 = CARTESIAN_POINT('',(-4.091426690538,2.655,0.874745725546)); +#98019 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98020 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98021 = ADVANCED_FACE('',(#98022),#98033,.T.); +#98022 = FACE_BOUND('',#98023,.T.); +#98023 = EDGE_LOOP('',(#98024,#98025,#98031,#98032)); +#98024 = ORIENTED_EDGE('',*,*,#97842,.T.); +#98025 = ORIENTED_EDGE('',*,*,#98026,.T.); +#98026 = EDGE_CURVE('',#97835,#97747,#98027,.T.); +#98027 = LINE('',#98028,#98029); +#98028 = CARTESIAN_POINT('',(-2.237701336216,1.905,1.43988764291)); +#98029 = VECTOR('',#98030,1.); +#98030 = DIRECTION('',(0.,0.,-1.)); +#98031 = ORIENTED_EDGE('',*,*,#97746,.F.); +#98032 = ORIENTED_EDGE('',*,*,#97943,.F.); +#98033 = PLANE('',#98034); +#98034 = AXIS2_PLACEMENT_3D('',#98035,#98036,#98037); +#98035 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#98036 = DIRECTION('',(1.,0.,0.)); +#98037 = DIRECTION('',(0.,0.,-1.)); +#98038 = ADVANCED_FACE('',(#98039),#98064,.T.); +#98039 = FACE_BOUND('',#98040,.T.); +#98040 = EDGE_LOOP('',(#98041,#98049,#98057,#98063)); +#98041 = ORIENTED_EDGE('',*,*,#98042,.T.); +#98042 = EDGE_CURVE('',#97959,#98043,#98045,.T.); +#98043 = VERTEX_POINT('',#98044); +#98044 = CARTESIAN_POINT('',(-5.79,1.905,-2.70609920631E-16)); +#98045 = LINE('',#98046,#98047); +#98046 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#98047 = VECTOR('',#98048,1.); +#98048 = DIRECTION('',(0.,-1.,0.)); +#98049 = ORIENTED_EDGE('',*,*,#98050,.T.); +#98050 = EDGE_CURVE('',#98043,#98051,#98053,.T.); +#98051 = VERTEX_POINT('',#98052); +#98052 = CARTESIAN_POINT('',(-5.79,1.905,0.5)); +#98053 = LINE('',#98054,#98055); +#98054 = CARTESIAN_POINT('',(-5.79,1.905,-2.70609920631E-16)); +#98055 = VECTOR('',#98056,1.); +#98056 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#98057 = ORIENTED_EDGE('',*,*,#98058,.F.); +#98058 = EDGE_CURVE('',#97961,#98051,#98059,.T.); +#98059 = LINE('',#98060,#98061); +#98060 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#98061 = VECTOR('',#98062,1.); +#98062 = DIRECTION('',(0.,-1.,0.)); +#98063 = ORIENTED_EDGE('',*,*,#97958,.F.); +#98064 = PLANE('',#98065); +#98065 = AXIS2_PLACEMENT_3D('',#98066,#98067,#98068); +#98066 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#98067 = DIRECTION('',(-1.,0.,1.7763568394E-15)); +#98068 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#98069 = ADVANCED_FACE('',(#98070),#98088,.T.); +#98070 = FACE_BOUND('',#98071,.T.); +#98071 = EDGE_LOOP('',(#98072,#98080,#98086,#98087)); +#98072 = ORIENTED_EDGE('',*,*,#98073,.T.); +#98073 = EDGE_CURVE('',#98003,#98074,#98076,.T.); +#98074 = VERTEX_POINT('',#98075); +#98075 = CARTESIAN_POINT('',(-5.28,1.905,-2.22044604925E-16)); +#98076 = LINE('',#98077,#98078); +#98077 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98078 = VECTOR('',#98079,1.); +#98079 = DIRECTION('',(0.,-1.,0.)); +#98080 = ORIENTED_EDGE('',*,*,#98081,.T.); +#98081 = EDGE_CURVE('',#98074,#98043,#98082,.T.); +#98082 = LINE('',#98083,#98084); +#98083 = CARTESIAN_POINT('',(-5.28,1.905,-2.22044604925E-16)); +#98084 = VECTOR('',#98085,1.); +#98085 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#98086 = ORIENTED_EDGE('',*,*,#98042,.F.); +#98087 = ORIENTED_EDGE('',*,*,#98011,.F.); +#98088 = PLANE('',#98089); +#98089 = AXIS2_PLACEMENT_3D('',#98090,#98091,#98092); +#98090 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98091 = DIRECTION('',(9.522610922745E-17,0.,-1.)); +#98092 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#98093 = ADVANCED_FACE('',(#98094),#98113,.T.); +#98094 = FACE_BOUND('',#98095,.T.); +#98095 = EDGE_LOOP('',(#98096,#98104,#98111,#98112)); +#98096 = ORIENTED_EDGE('',*,*,#98097,.T.); +#98097 = EDGE_CURVE('',#97995,#98098,#98100,.T.); +#98098 = VERTEX_POINT('',#98099); +#98099 = CARTESIAN_POINT('',(-4.575230534411,1.905,0.493484892506)); +#98100 = LINE('',#98101,#98102); +#98101 = CARTESIAN_POINT('',(-4.575230534411,2.655,0.493484892506)); +#98102 = VECTOR('',#98103,1.); +#98103 = DIRECTION('',(0.,-1.,0.)); +#98104 = ORIENTED_EDGE('',*,*,#98105,.T.); +#98105 = EDGE_CURVE('',#98098,#98074,#98106,.T.); +#98106 = CIRCLE('',#98107,0.75); +#98107 = AXIS2_PLACEMENT_3D('',#98108,#98109,#98110); +#98108 = CARTESIAN_POINT('',(-5.28,1.905,0.75)); +#98109 = DIRECTION('',(0.,1.,0.)); +#98110 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98111 = ORIENTED_EDGE('',*,*,#98073,.F.); +#98112 = ORIENTED_EDGE('',*,*,#98002,.F.); +#98113 = CYLINDRICAL_SURFACE('',#98114,0.75); +#98114 = AXIS2_PLACEMENT_3D('',#98115,#98116,#98117); +#98115 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#98116 = DIRECTION('',(0.,1.,0.)); +#98117 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98118 = ADVANCED_FACE('',(#98119),#98130,.T.); +#98119 = FACE_BOUND('',#98120,.T.); +#98120 = EDGE_LOOP('',(#98121,#98122,#98128,#98129)); +#98121 = ORIENTED_EDGE('',*,*,#97680,.T.); +#98122 = ORIENTED_EDGE('',*,*,#98123,.T.); +#98123 = EDGE_CURVE('',#97681,#98098,#98124,.T.); +#98124 = LINE('',#98125,#98126); +#98125 = CARTESIAN_POINT('',(-4.472624491413,1.905,0.775392678742)); +#98126 = VECTOR('',#98127,1.); +#98127 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#98128 = ORIENTED_EDGE('',*,*,#98097,.F.); +#98129 = ORIENTED_EDGE('',*,*,#97994,.F.); +#98130 = PLANE('',#98131); +#98131 = AXIS2_PLACEMENT_3D('',#98132,#98133,#98134); +#98132 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#98133 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98134 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#98135 = ADVANCED_FACE('',(#98136),#98154,.T.); +#98136 = FACE_BOUND('',#98137,.T.); +#98137 = EDGE_LOOP('',(#98138,#98146,#98152,#98153)); +#98138 = ORIENTED_EDGE('',*,*,#98139,.T.); +#98139 = EDGE_CURVE('',#97977,#98140,#98142,.T.); +#98140 = VERTEX_POINT('',#98141); +#98141 = CARTESIAN_POINT('',(-5.045076844804,1.905,0.664494964169)); +#98142 = LINE('',#98143,#98144); +#98143 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#98144 = VECTOR('',#98145,1.); +#98145 = DIRECTION('',(0.,-1.,0.)); +#98146 = ORIENTED_EDGE('',*,*,#98147,.T.); +#98147 = EDGE_CURVE('',#98140,#97884,#98148,.T.); +#98148 = LINE('',#98149,#98150); +#98149 = CARTESIAN_POINT('',(-5.045076844804,1.905,0.664494964169)); +#98150 = VECTOR('',#98151,1.); +#98151 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#98152 = ORIENTED_EDGE('',*,*,#97883,.F.); +#98153 = ORIENTED_EDGE('',*,*,#97985,.F.); +#98154 = PLANE('',#98155); +#98155 = AXIS2_PLACEMENT_3D('',#98156,#98157,#98158); +#98156 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#98157 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#98158 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#98159 = ADVANCED_FACE('',(#98160),#98179,.F.); +#98160 = FACE_BOUND('',#98161,.F.); +#98161 = EDGE_LOOP('',(#98162,#98163,#98164,#98173)); +#98162 = ORIENTED_EDGE('',*,*,#97976,.T.); +#98163 = ORIENTED_EDGE('',*,*,#98139,.T.); +#98164 = ORIENTED_EDGE('',*,*,#98165,.F.); +#98165 = EDGE_CURVE('',#98166,#98140,#98168,.T.); +#98166 = VERTEX_POINT('',#98167); +#98167 = CARTESIAN_POINT('',(-5.28,1.905,0.5)); +#98168 = CIRCLE('',#98169,0.25); +#98169 = AXIS2_PLACEMENT_3D('',#98170,#98171,#98172); +#98170 = CARTESIAN_POINT('',(-5.28,1.905,0.75)); +#98171 = DIRECTION('',(0.,-1.,0.)); +#98172 = DIRECTION('',(0.,0.,-1.)); +#98173 = ORIENTED_EDGE('',*,*,#98174,.F.); +#98174 = EDGE_CURVE('',#97969,#98166,#98175,.T.); +#98175 = LINE('',#98176,#98177); +#98176 = CARTESIAN_POINT('',(-5.28,2.655,0.5)); +#98177 = VECTOR('',#98178,1.); +#98178 = DIRECTION('',(0.,-1.,0.)); +#98179 = CYLINDRICAL_SURFACE('',#98180,0.25); +#98180 = AXIS2_PLACEMENT_3D('',#98181,#98182,#98183); +#98181 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#98182 = DIRECTION('',(-0.,1.,-0.)); +#98183 = DIRECTION('',(0.,0.,-1.)); +#98184 = ADVANCED_FACE('',(#98185),#98196,.T.); +#98185 = FACE_BOUND('',#98186,.T.); +#98186 = EDGE_LOOP('',(#98187,#98188,#98194,#98195)); +#98187 = ORIENTED_EDGE('',*,*,#98058,.T.); +#98188 = ORIENTED_EDGE('',*,*,#98189,.T.); +#98189 = EDGE_CURVE('',#98051,#98166,#98190,.T.); +#98190 = LINE('',#98191,#98192); +#98191 = CARTESIAN_POINT('',(-5.79,1.905,0.5)); +#98192 = VECTOR('',#98193,1.); +#98193 = DIRECTION('',(1.,0.,0.)); +#98194 = ORIENTED_EDGE('',*,*,#98174,.F.); +#98195 = ORIENTED_EDGE('',*,*,#97968,.F.); +#98196 = PLANE('',#98197); +#98197 = AXIS2_PLACEMENT_3D('',#98198,#98199,#98200); +#98198 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#98199 = DIRECTION('',(-0.,0.,1.)); +#98200 = DIRECTION('',(1.,0.,0.)); +#98201 = ADVANCED_FACE('',(#98202),#98219,.F.); +#98202 = FACE_BOUND('',#98203,.F.); +#98203 = EDGE_LOOP('',(#98204,#98205,#98206,#98207,#98208,#98209,#98215, + #98216,#98217,#98218)); +#98204 = ORIENTED_EDGE('',*,*,#98050,.T.); +#98205 = ORIENTED_EDGE('',*,*,#98189,.T.); +#98206 = ORIENTED_EDGE('',*,*,#98165,.T.); +#98207 = ORIENTED_EDGE('',*,*,#98147,.T.); +#98208 = ORIENTED_EDGE('',*,*,#97891,.T.); +#98209 = ORIENTED_EDGE('',*,*,#98210,.F.); +#98210 = EDGE_CURVE('',#97689,#97892,#98211,.T.); +#98211 = LINE('',#98212,#98213); +#98212 = CARTESIAN_POINT('',(-4.24,1.905,0.437372862773)); +#98213 = VECTOR('',#98214,1.); +#98214 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98215 = ORIENTED_EDGE('',*,*,#97688,.T.); +#98216 = ORIENTED_EDGE('',*,*,#98123,.T.); +#98217 = ORIENTED_EDGE('',*,*,#98105,.T.); +#98218 = ORIENTED_EDGE('',*,*,#98081,.T.); +#98219 = PLANE('',#98220); +#98220 = AXIS2_PLACEMENT_3D('',#98221,#98222,#98223); +#98221 = CARTESIAN_POINT('',(-4.091426690538,1.905,0.874745725546)); +#98222 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98223 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98224 = ADVANCED_FACE('',(#98225),#98236,.T.); +#98225 = FACE_BOUND('',#98226,.T.); +#98226 = EDGE_LOOP('',(#98227,#98228,#98229,#98235)); +#98227 = ORIENTED_EDGE('',*,*,#98210,.F.); +#98228 = ORIENTED_EDGE('',*,*,#97697,.F.); +#98229 = ORIENTED_EDGE('',*,*,#98230,.T.); +#98230 = EDGE_CURVE('',#97698,#97901,#98231,.T.); +#98231 = LINE('',#98232,#98233); +#98232 = CARTESIAN_POINT('',(-4.24,1.785,0.437372862773)); +#98233 = VECTOR('',#98234,1.); +#98234 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98235 = ORIENTED_EDGE('',*,*,#97900,.T.); +#98236 = PLANE('',#98237); +#98237 = AXIS2_PLACEMENT_3D('',#98238,#98239,#98240); +#98238 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#98239 = DIRECTION('',(-1.,0.,0.)); +#98240 = DIRECTION('',(0.,1.,0.)); +#98241 = ADVANCED_FACE('',(#98242),#98255,.F.); +#98242 = FACE_BOUND('',#98243,.F.); +#98243 = EDGE_LOOP('',(#98244,#98245,#98246,#98247,#98248,#98254)); +#98244 = ORIENTED_EDGE('',*,*,#97705,.T.); +#98245 = ORIENTED_EDGE('',*,*,#98230,.T.); +#98246 = ORIENTED_EDGE('',*,*,#97908,.T.); +#98247 = ORIENTED_EDGE('',*,*,#97818,.T.); +#98248 = ORIENTED_EDGE('',*,*,#98249,.T.); +#98249 = EDGE_CURVE('',#97819,#97763,#98250,.T.); +#98250 = LINE('',#98251,#98252); +#98251 = CARTESIAN_POINT('',(-3.49,1.785,0.437372862773)); +#98252 = VECTOR('',#98253,1.); +#98253 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#98254 = ORIENTED_EDGE('',*,*,#97770,.T.); +#98255 = PLANE('',#98256); +#98256 = AXIS2_PLACEMENT_3D('',#98257,#98258,#98259); +#98257 = CARTESIAN_POINT('',(-4.091426690538,1.785,0.874745725546)); +#98258 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98259 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98260 = ADVANCED_FACE('',(#98261),#98272,.T.); +#98261 = FACE_BOUND('',#98262,.T.); +#98262 = EDGE_LOOP('',(#98263,#98269,#98270,#98271)); +#98263 = ORIENTED_EDGE('',*,*,#98264,.F.); +#98264 = EDGE_CURVE('',#97827,#97755,#98265,.T.); +#98265 = LINE('',#98266,#98267); +#98266 = CARTESIAN_POINT('',(-3.49,1.905,0.437372862773)); +#98267 = VECTOR('',#98268,1.); +#98268 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#98269 = ORIENTED_EDGE('',*,*,#97826,.F.); +#98270 = ORIENTED_EDGE('',*,*,#98249,.T.); +#98271 = ORIENTED_EDGE('',*,*,#97762,.F.); +#98272 = PLANE('',#98273); +#98273 = AXIS2_PLACEMENT_3D('',#98274,#98275,#98276); +#98274 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#98275 = DIRECTION('',(1.,0.,-0.)); +#98276 = DIRECTION('',(0.,-1.,0.)); +#98277 = ADVANCED_FACE('',(#98278),#98284,.F.); +#98278 = FACE_BOUND('',#98279,.F.); +#98279 = EDGE_LOOP('',(#98280,#98281,#98282,#98283)); +#98280 = ORIENTED_EDGE('',*,*,#98264,.F.); +#98281 = ORIENTED_EDGE('',*,*,#97834,.T.); +#98282 = ORIENTED_EDGE('',*,*,#98026,.T.); +#98283 = ORIENTED_EDGE('',*,*,#97754,.T.); +#98284 = PLANE('',#98285); +#98285 = AXIS2_PLACEMENT_3D('',#98286,#98287,#98288); +#98286 = CARTESIAN_POINT('',(-4.091426690538,1.905,0.874745725546)); +#98287 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98288 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#98293)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#98290,#98291,#98292)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#98290 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#98291 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#98292 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#98293 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#98290, + 'distance_accuracy_value','confusion accuracy'); +#98294 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98295,#98297); +#98295 = ( REPRESENTATION_RELATIONSHIP('','',#96626,#96603) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98296) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98296 = ITEM_DEFINED_TRANSFORMATION('','',#11,#96604); +#98297 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98298); +#98298 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('113','5','',#96598,#96621,$); +#98299 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96623)); +#98300 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98301,#98303); +#98301 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98302) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98302 = ITEM_DEFINED_TRANSFORMATION('','',#11,#355); +#98303 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98304); +#98304 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('118','R53','',#5,#523,$); +#98305 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98306,#98308); +#98306 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98307) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98307 = ITEM_DEFINED_TRANSFORMATION('','',#11,#359); +#98308 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98309); +#98309 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('119','R51','',#5,#523,$); +#98310 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98311,#98313); +#98311 = ( REPRESENTATION_RELATIONSHIP('','',#88978,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98312) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98312 = ITEM_DEFINED_TRANSFORMATION('','',#11,#363); +#98313 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98314); +#98314 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('120','C10','',#5,#88973,$); +#98315 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98316,#98318); +#98316 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98317) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98317 = ITEM_DEFINED_TRANSFORMATION('','',#11,#367); +#98318 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98319); +#98319 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('121','Rcomp2','',#5,#523,$); +#98320 = SHAPE_DEFINITION_REPRESENTATION(#98321,#98327); +#98321 = PRODUCT_DEFINITION_SHAPE('','',#98322); +#98322 = PRODUCT_DEFINITION('design','',#98323,#98326); +#98323 = PRODUCT_DEFINITION_FORMATION('','',#98324); +#98324 = PRODUCT('SW_PUSH_6mm','SW_PUSH_6mm','',(#98325)); +#98325 = PRODUCT_CONTEXT('',#2,'mechanical'); +#98326 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#98327 = SHAPE_REPRESENTATION('',(#11,#98328),#98332); +#98328 = AXIS2_PLACEMENT_3D('',#98329,#98330,#98331); +#98329 = CARTESIAN_POINT('',(0.,0.,0.)); +#98330 = DIRECTION('',(0.,0.,1.)); +#98331 = DIRECTION('',(1.,0.,-0.)); +#98332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#98336)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#98333,#98334,#98335)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#98333 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#98334 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#98335 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#98336 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#98333, + 'distance_accuracy_value','confusion accuracy'); +#98337 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98338,#98340); +#98338 = ( REPRESENTATION_RELATIONSHIP('','',#98327,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98339) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98339 = ITEM_DEFINED_TRANSFORMATION('','',#11,#371); +#98340 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98341); +#98341 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('123','SW1','',#5,#98322,$); +#98342 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#98324)); +#98343 = SHAPE_DEFINITION_REPRESENTATION(#98344,#98350); +#98344 = PRODUCT_DEFINITION_SHAPE('','',#98345); +#98345 = PRODUCT_DEFINITION('design','',#98346,#98349); +#98346 = PRODUCT_DEFINITION_FORMATION('','',#98347); +#98347 = PRODUCT('SW_PUSH_6mm','SW_PUSH_6mm','',(#98348)); +#98348 = PRODUCT_CONTEXT('',#2,'mechanical'); +#98349 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#98350 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#98351),#101580); +#98351 = MANIFOLD_SOLID_BREP('',#98352); +#98352 = CLOSED_SHELL('',(#98353,#98370,#98395,#98518,#98549,#98574, + #98599,#98623,#98647,#98672,#98697,#98714,#98739,#98764,#98789, + #98814,#98845,#98870,#98895,#98983,#99071,#99096,#99121,#99138, + #99147,#99173,#99182,#99191,#99235,#99385,#99409,#99552,#99702, + #99852,#99869,#100019,#100043,#100186,#100336,#100486,#100503, + #100512,#100529,#100546,#100563,#100580,#100602,#100619,#100636, + #100653,#100670,#100682,#100699,#100716,#100733,#100750,#100767, + #100784,#100801,#100818,#100830,#100852,#100869,#100886,#100903, + #100920,#100932,#100949,#100966,#100983,#101000,#101017,#101034, + #101051,#101068,#101080,#101102,#101119,#101136,#101153,#101170, + #101182,#101199,#101216,#101233,#101250,#101267,#101284,#101301, + #101318,#101330,#101352,#101369,#101386,#101403,#101420,#101432, + #101449,#101466,#101483,#101500,#101517,#101534,#101551,#101568)); +#98353 = ADVANCED_FACE('',(#98354),#98365,.F.); +#98354 = FACE_BOUND('',#98355,.T.); +#98355 = EDGE_LOOP('',(#98356)); +#98356 = ORIENTED_EDGE('',*,*,#98357,.T.); +#98357 = EDGE_CURVE('',#98358,#98358,#98360,.T.); +#98358 = VERTEX_POINT('',#98359); +#98359 = CARTESIAN_POINT('',(1.65,-4.25,4.1)); +#98360 = CIRCLE('',#98361,0.5); +#98361 = AXIS2_PLACEMENT_3D('',#98362,#98363,#98364); +#98362 = CARTESIAN_POINT('',(1.15,-4.25,4.1)); +#98363 = DIRECTION('',(0.,0.,1.)); +#98364 = DIRECTION('',(1.,0.,-0.)); +#98365 = PLANE('',#98366); +#98366 = AXIS2_PLACEMENT_3D('',#98367,#98368,#98369); +#98367 = CARTESIAN_POINT('',(1.65,-4.25,4.1)); +#98368 = DIRECTION('',(0.,0.,-1.)); +#98369 = DIRECTION('',(-1.,0.,0.)); +#98370 = ADVANCED_FACE('',(#98371),#98390,.T.); +#98371 = FACE_BOUND('',#98372,.T.); +#98372 = EDGE_LOOP('',(#98373,#98381,#98382,#98383)); +#98373 = ORIENTED_EDGE('',*,*,#98374,.T.); +#98374 = EDGE_CURVE('',#98375,#98358,#98377,.T.); +#98375 = VERTEX_POINT('',#98376); +#98376 = CARTESIAN_POINT('',(1.65,-4.25,3.6)); +#98377 = LINE('',#98378,#98379); +#98378 = CARTESIAN_POINT('',(1.65,-4.25,3.5)); +#98379 = VECTOR('',#98380,1.); +#98380 = DIRECTION('',(0.,0.,1.)); +#98381 = ORIENTED_EDGE('',*,*,#98357,.F.); +#98382 = ORIENTED_EDGE('',*,*,#98374,.F.); +#98383 = ORIENTED_EDGE('',*,*,#98384,.F.); +#98384 = EDGE_CURVE('',#98375,#98375,#98385,.T.); +#98385 = CIRCLE('',#98386,0.5); +#98386 = AXIS2_PLACEMENT_3D('',#98387,#98388,#98389); +#98387 = CARTESIAN_POINT('',(1.15,-4.25,3.6)); +#98388 = DIRECTION('',(0.,0.,-1.)); +#98389 = DIRECTION('',(1.,0.,0.)); +#98390 = CYLINDRICAL_SURFACE('',#98391,0.5); +#98391 = AXIS2_PLACEMENT_3D('',#98392,#98393,#98394); +#98392 = CARTESIAN_POINT('',(1.15,-4.25,3.5)); +#98393 = DIRECTION('',(-0.,-0.,-1.)); +#98394 = DIRECTION('',(1.,0.,0.)); +#98395 = ADVANCED_FACE('',(#98396,#98466,#98477,#98488,#98499,#98510), + #98513,.F.); +#98396 = FACE_BOUND('',#98397,.F.); +#98397 = EDGE_LOOP('',(#98398,#98408,#98417,#98425,#98434,#98442,#98451, + #98459)); +#98398 = ORIENTED_EDGE('',*,*,#98399,.F.); +#98399 = EDGE_CURVE('',#98400,#98402,#98404,.T.); +#98400 = VERTEX_POINT('',#98401); +#98401 = CARTESIAN_POINT('',(0.45,-5.25,3.6)); +#98402 = VERTEX_POINT('',#98403); +#98403 = CARTESIAN_POINT('',(5.85,-5.25,3.6)); +#98404 = LINE('',#98405,#98406); +#98405 = CARTESIAN_POINT('',(0.15,-5.25,3.6)); +#98406 = VECTOR('',#98407,1.); +#98407 = DIRECTION('',(1.,0.,0.)); +#98408 = ORIENTED_EDGE('',*,*,#98409,.T.); +#98409 = EDGE_CURVE('',#98400,#98410,#98412,.T.); +#98410 = VERTEX_POINT('',#98411); +#98411 = CARTESIAN_POINT('',(0.15,-4.95,3.6)); +#98412 = CIRCLE('',#98413,0.3); +#98413 = AXIS2_PLACEMENT_3D('',#98414,#98415,#98416); +#98414 = CARTESIAN_POINT('',(0.45,-4.95,3.6)); +#98415 = DIRECTION('',(-0.,-0.,-1.)); +#98416 = DIRECTION('',(0.,-1.,0.)); +#98417 = ORIENTED_EDGE('',*,*,#98418,.F.); +#98418 = EDGE_CURVE('',#98419,#98410,#98421,.T.); +#98419 = VERTEX_POINT('',#98420); +#98420 = CARTESIAN_POINT('',(0.15,0.45,3.6)); +#98421 = LINE('',#98422,#98423); +#98422 = CARTESIAN_POINT('',(0.15,0.75,3.6)); +#98423 = VECTOR('',#98424,1.); +#98424 = DIRECTION('',(0.,-1.,0.)); +#98425 = ORIENTED_EDGE('',*,*,#98426,.F.); +#98426 = EDGE_CURVE('',#98427,#98419,#98429,.T.); +#98427 = VERTEX_POINT('',#98428); +#98428 = CARTESIAN_POINT('',(0.45,0.75,3.6)); +#98429 = CIRCLE('',#98430,0.3); +#98430 = AXIS2_PLACEMENT_3D('',#98431,#98432,#98433); +#98431 = CARTESIAN_POINT('',(0.45,0.45,3.6)); +#98432 = DIRECTION('',(-0.,0.,1.)); +#98433 = DIRECTION('',(0.,-1.,0.)); +#98434 = ORIENTED_EDGE('',*,*,#98435,.F.); +#98435 = EDGE_CURVE('',#98436,#98427,#98438,.T.); +#98436 = VERTEX_POINT('',#98437); +#98437 = CARTESIAN_POINT('',(5.85,0.75,3.6)); +#98438 = LINE('',#98439,#98440); +#98439 = CARTESIAN_POINT('',(6.15,0.75,3.6)); +#98440 = VECTOR('',#98441,1.); +#98441 = DIRECTION('',(-1.,0.,0.)); +#98442 = ORIENTED_EDGE('',*,*,#98443,.F.); +#98443 = EDGE_CURVE('',#98444,#98436,#98446,.T.); +#98444 = VERTEX_POINT('',#98445); +#98445 = CARTESIAN_POINT('',(6.15,0.45,3.6)); +#98446 = CIRCLE('',#98447,0.3); +#98447 = AXIS2_PLACEMENT_3D('',#98448,#98449,#98450); +#98448 = CARTESIAN_POINT('',(5.85,0.45,3.6)); +#98449 = DIRECTION('',(-0.,0.,1.)); +#98450 = DIRECTION('',(0.,-1.,0.)); +#98451 = ORIENTED_EDGE('',*,*,#98452,.F.); +#98452 = EDGE_CURVE('',#98453,#98444,#98455,.T.); +#98453 = VERTEX_POINT('',#98454); +#98454 = CARTESIAN_POINT('',(6.15,-4.95,3.6)); +#98455 = LINE('',#98456,#98457); +#98456 = CARTESIAN_POINT('',(6.15,-5.25,3.6)); +#98457 = VECTOR('',#98458,1.); +#98458 = DIRECTION('',(0.,1.,0.)); +#98459 = ORIENTED_EDGE('',*,*,#98460,.F.); +#98460 = EDGE_CURVE('',#98402,#98453,#98461,.T.); +#98461 = CIRCLE('',#98462,0.3); +#98462 = AXIS2_PLACEMENT_3D('',#98463,#98464,#98465); +#98463 = CARTESIAN_POINT('',(5.85,-4.95,3.6)); +#98464 = DIRECTION('',(-0.,0.,1.)); +#98465 = DIRECTION('',(0.,-1.,0.)); +#98466 = FACE_BOUND('',#98467,.F.); +#98467 = EDGE_LOOP('',(#98468)); +#98468 = ORIENTED_EDGE('',*,*,#98469,.F.); +#98469 = EDGE_CURVE('',#98470,#98470,#98472,.T.); +#98470 = VERTEX_POINT('',#98471); +#98471 = CARTESIAN_POINT('',(5.65,-4.25,3.6)); +#98472 = CIRCLE('',#98473,0.5); +#98473 = AXIS2_PLACEMENT_3D('',#98474,#98475,#98476); +#98474 = CARTESIAN_POINT('',(5.15,-4.25,3.6)); +#98475 = DIRECTION('',(0.,0.,-1.)); +#98476 = DIRECTION('',(1.,0.,0.)); +#98477 = FACE_BOUND('',#98478,.F.); +#98478 = EDGE_LOOP('',(#98479)); +#98479 = ORIENTED_EDGE('',*,*,#98480,.F.); +#98480 = EDGE_CURVE('',#98481,#98481,#98483,.T.); +#98481 = VERTEX_POINT('',#98482); +#98482 = CARTESIAN_POINT('',(4.9,-2.25,3.6)); +#98483 = CIRCLE('',#98484,1.75); +#98484 = AXIS2_PLACEMENT_3D('',#98485,#98486,#98487); +#98485 = CARTESIAN_POINT('',(3.15,-2.25,3.6)); +#98486 = DIRECTION('',(0.,0.,-1.)); +#98487 = DIRECTION('',(1.,0.,0.)); +#98488 = FACE_BOUND('',#98489,.F.); +#98489 = EDGE_LOOP('',(#98490)); +#98490 = ORIENTED_EDGE('',*,*,#98491,.F.); +#98491 = EDGE_CURVE('',#98492,#98492,#98494,.T.); +#98492 = VERTEX_POINT('',#98493); +#98493 = CARTESIAN_POINT('',(1.65,-0.25,3.6)); +#98494 = CIRCLE('',#98495,0.5); +#98495 = AXIS2_PLACEMENT_3D('',#98496,#98497,#98498); +#98496 = CARTESIAN_POINT('',(1.15,-0.25,3.6)); +#98497 = DIRECTION('',(0.,0.,-1.)); +#98498 = DIRECTION('',(1.,0.,0.)); +#98499 = FACE_BOUND('',#98500,.F.); +#98500 = EDGE_LOOP('',(#98501)); +#98501 = ORIENTED_EDGE('',*,*,#98502,.F.); +#98502 = EDGE_CURVE('',#98503,#98503,#98505,.T.); +#98503 = VERTEX_POINT('',#98504); +#98504 = CARTESIAN_POINT('',(5.65,-0.25,3.6)); +#98505 = CIRCLE('',#98506,0.5); +#98506 = AXIS2_PLACEMENT_3D('',#98507,#98508,#98509); +#98507 = CARTESIAN_POINT('',(5.15,-0.25,3.6)); +#98508 = DIRECTION('',(0.,0.,-1.)); +#98509 = DIRECTION('',(1.,0.,0.)); +#98510 = FACE_BOUND('',#98511,.F.); +#98511 = EDGE_LOOP('',(#98512)); +#98512 = ORIENTED_EDGE('',*,*,#98384,.F.); +#98513 = PLANE('',#98514); +#98514 = AXIS2_PLACEMENT_3D('',#98515,#98516,#98517); +#98515 = CARTESIAN_POINT('',(0.15,-5.25,3.6)); +#98516 = DIRECTION('',(0.,0.,-1.)); +#98517 = DIRECTION('',(-1.,0.,0.)); +#98518 = ADVANCED_FACE('',(#98519),#98544,.F.); +#98519 = FACE_BOUND('',#98520,.F.); +#98520 = EDGE_LOOP('',(#98521,#98531,#98537,#98538)); +#98521 = ORIENTED_EDGE('',*,*,#98522,.F.); +#98522 = EDGE_CURVE('',#98523,#98525,#98527,.T.); +#98523 = VERTEX_POINT('',#98524); +#98524 = CARTESIAN_POINT('',(0.45,-5.25,3.5)); +#98525 = VERTEX_POINT('',#98526); +#98526 = CARTESIAN_POINT('',(5.85,-5.25,3.5)); +#98527 = LINE('',#98528,#98529); +#98528 = CARTESIAN_POINT('',(0.15,-5.25,3.5)); +#98529 = VECTOR('',#98530,1.); +#98530 = DIRECTION('',(1.,0.,0.)); +#98531 = ORIENTED_EDGE('',*,*,#98532,.T.); +#98532 = EDGE_CURVE('',#98523,#98400,#98533,.T.); +#98533 = LINE('',#98534,#98535); +#98534 = CARTESIAN_POINT('',(0.45,-5.25,3.5)); +#98535 = VECTOR('',#98536,1.); +#98536 = DIRECTION('',(0.,0.,1.)); +#98537 = ORIENTED_EDGE('',*,*,#98399,.T.); +#98538 = ORIENTED_EDGE('',*,*,#98539,.F.); +#98539 = EDGE_CURVE('',#98525,#98402,#98540,.T.); +#98540 = LINE('',#98541,#98542); +#98541 = CARTESIAN_POINT('',(5.85,-5.25,3.5)); +#98542 = VECTOR('',#98543,1.); +#98543 = DIRECTION('',(0.,0.,1.)); +#98544 = PLANE('',#98545); +#98545 = AXIS2_PLACEMENT_3D('',#98546,#98547,#98548); +#98546 = CARTESIAN_POINT('',(0.15,-5.25,3.5)); +#98547 = DIRECTION('',(0.,1.,0.)); +#98548 = DIRECTION('',(1.,0.,0.)); +#98549 = ADVANCED_FACE('',(#98550),#98569,.T.); +#98550 = FACE_BOUND('',#98551,.T.); +#98551 = EDGE_LOOP('',(#98552,#98553,#98554,#98562)); +#98552 = ORIENTED_EDGE('',*,*,#98532,.T.); +#98553 = ORIENTED_EDGE('',*,*,#98409,.T.); +#98554 = ORIENTED_EDGE('',*,*,#98555,.F.); +#98555 = EDGE_CURVE('',#98556,#98410,#98558,.T.); +#98556 = VERTEX_POINT('',#98557); +#98557 = CARTESIAN_POINT('',(0.15,-4.95,3.5)); +#98558 = LINE('',#98559,#98560); +#98559 = CARTESIAN_POINT('',(0.15,-4.95,3.5)); +#98560 = VECTOR('',#98561,1.); +#98561 = DIRECTION('',(0.,0.,1.)); +#98562 = ORIENTED_EDGE('',*,*,#98563,.F.); +#98563 = EDGE_CURVE('',#98523,#98556,#98564,.T.); +#98564 = CIRCLE('',#98565,0.3); +#98565 = AXIS2_PLACEMENT_3D('',#98566,#98567,#98568); +#98566 = CARTESIAN_POINT('',(0.45,-4.95,3.5)); +#98567 = DIRECTION('',(-0.,-0.,-1.)); +#98568 = DIRECTION('',(0.,-1.,0.)); +#98569 = CYLINDRICAL_SURFACE('',#98570,0.3); +#98570 = AXIS2_PLACEMENT_3D('',#98571,#98572,#98573); +#98571 = CARTESIAN_POINT('',(0.45,-4.95,3.5)); +#98572 = DIRECTION('',(0.,0.,1.)); +#98573 = DIRECTION('',(0.,-1.,0.)); +#98574 = ADVANCED_FACE('',(#98575),#98594,.T.); +#98575 = FACE_BOUND('',#98576,.T.); +#98576 = EDGE_LOOP('',(#98577,#98586,#98592,#98593)); +#98577 = ORIENTED_EDGE('',*,*,#98578,.T.); +#98578 = EDGE_CURVE('',#98525,#98579,#98581,.T.); +#98579 = VERTEX_POINT('',#98580); +#98580 = CARTESIAN_POINT('',(6.15,-4.95,3.5)); +#98581 = CIRCLE('',#98582,0.3); +#98582 = AXIS2_PLACEMENT_3D('',#98583,#98584,#98585); +#98583 = CARTESIAN_POINT('',(5.85,-4.95,3.5)); +#98584 = DIRECTION('',(-0.,0.,1.)); +#98585 = DIRECTION('',(0.,-1.,0.)); +#98586 = ORIENTED_EDGE('',*,*,#98587,.T.); +#98587 = EDGE_CURVE('',#98579,#98453,#98588,.T.); +#98588 = LINE('',#98589,#98590); +#98589 = CARTESIAN_POINT('',(6.15,-4.95,3.5)); +#98590 = VECTOR('',#98591,1.); +#98591 = DIRECTION('',(0.,0.,1.)); +#98592 = ORIENTED_EDGE('',*,*,#98460,.F.); +#98593 = ORIENTED_EDGE('',*,*,#98539,.F.); +#98594 = CYLINDRICAL_SURFACE('',#98595,0.3); +#98595 = AXIS2_PLACEMENT_3D('',#98596,#98597,#98598); +#98596 = CARTESIAN_POINT('',(5.85,-4.95,3.5)); +#98597 = DIRECTION('',(0.,0.,1.)); +#98598 = DIRECTION('',(0.,-1.,0.)); +#98599 = ADVANCED_FACE('',(#98600),#98618,.F.); +#98600 = FACE_BOUND('',#98601,.F.); +#98601 = EDGE_LOOP('',(#98602,#98610,#98616,#98617)); +#98602 = ORIENTED_EDGE('',*,*,#98603,.F.); +#98603 = EDGE_CURVE('',#98604,#98556,#98606,.T.); +#98604 = VERTEX_POINT('',#98605); +#98605 = CARTESIAN_POINT('',(0.15,0.45,3.5)); +#98606 = LINE('',#98607,#98608); +#98607 = CARTESIAN_POINT('',(0.15,0.75,3.5)); +#98608 = VECTOR('',#98609,1.); +#98609 = DIRECTION('',(0.,-1.,0.)); +#98610 = ORIENTED_EDGE('',*,*,#98611,.T.); +#98611 = EDGE_CURVE('',#98604,#98419,#98612,.T.); +#98612 = LINE('',#98613,#98614); +#98613 = CARTESIAN_POINT('',(0.15,0.45,3.5)); +#98614 = VECTOR('',#98615,1.); +#98615 = DIRECTION('',(0.,0.,1.)); +#98616 = ORIENTED_EDGE('',*,*,#98418,.T.); +#98617 = ORIENTED_EDGE('',*,*,#98555,.F.); +#98618 = PLANE('',#98619); +#98619 = AXIS2_PLACEMENT_3D('',#98620,#98621,#98622); +#98620 = CARTESIAN_POINT('',(0.15,0.75,3.5)); +#98621 = DIRECTION('',(1.,0.,0.)); +#98622 = DIRECTION('',(0.,-1.,0.)); +#98623 = ADVANCED_FACE('',(#98624),#98642,.F.); +#98624 = FACE_BOUND('',#98625,.F.); +#98625 = EDGE_LOOP('',(#98626,#98634,#98635,#98636)); +#98626 = ORIENTED_EDGE('',*,*,#98627,.F.); +#98627 = EDGE_CURVE('',#98579,#98628,#98630,.T.); +#98628 = VERTEX_POINT('',#98629); +#98629 = CARTESIAN_POINT('',(6.15,0.45,3.5)); +#98630 = LINE('',#98631,#98632); +#98631 = CARTESIAN_POINT('',(6.15,-5.25,3.5)); +#98632 = VECTOR('',#98633,1.); +#98633 = DIRECTION('',(0.,1.,0.)); +#98634 = ORIENTED_EDGE('',*,*,#98587,.T.); +#98635 = ORIENTED_EDGE('',*,*,#98452,.T.); +#98636 = ORIENTED_EDGE('',*,*,#98637,.F.); +#98637 = EDGE_CURVE('',#98628,#98444,#98638,.T.); +#98638 = LINE('',#98639,#98640); +#98639 = CARTESIAN_POINT('',(6.15,0.45,3.5)); +#98640 = VECTOR('',#98641,1.); +#98641 = DIRECTION('',(0.,0.,1.)); +#98642 = PLANE('',#98643); +#98643 = AXIS2_PLACEMENT_3D('',#98644,#98645,#98646); +#98644 = CARTESIAN_POINT('',(6.15,-5.25,3.5)); +#98645 = DIRECTION('',(-1.,0.,0.)); +#98646 = DIRECTION('',(0.,1.,0.)); +#98647 = ADVANCED_FACE('',(#98648),#98667,.T.); +#98648 = FACE_BOUND('',#98649,.T.); +#98649 = EDGE_LOOP('',(#98650,#98659,#98660,#98661)); +#98650 = ORIENTED_EDGE('',*,*,#98651,.T.); +#98651 = EDGE_CURVE('',#98652,#98604,#98654,.T.); +#98652 = VERTEX_POINT('',#98653); +#98653 = CARTESIAN_POINT('',(0.45,0.75,3.5)); +#98654 = CIRCLE('',#98655,0.3); +#98655 = AXIS2_PLACEMENT_3D('',#98656,#98657,#98658); +#98656 = CARTESIAN_POINT('',(0.45,0.45,3.5)); +#98657 = DIRECTION('',(-0.,0.,1.)); +#98658 = DIRECTION('',(0.,-1.,0.)); +#98659 = ORIENTED_EDGE('',*,*,#98611,.T.); +#98660 = ORIENTED_EDGE('',*,*,#98426,.F.); +#98661 = ORIENTED_EDGE('',*,*,#98662,.F.); +#98662 = EDGE_CURVE('',#98652,#98427,#98663,.T.); +#98663 = LINE('',#98664,#98665); +#98664 = CARTESIAN_POINT('',(0.45,0.75,3.5)); +#98665 = VECTOR('',#98666,1.); +#98666 = DIRECTION('',(0.,0.,1.)); +#98667 = CYLINDRICAL_SURFACE('',#98668,0.3); +#98668 = AXIS2_PLACEMENT_3D('',#98669,#98670,#98671); +#98669 = CARTESIAN_POINT('',(0.45,0.45,3.5)); +#98670 = DIRECTION('',(0.,0.,1.)); +#98671 = DIRECTION('',(0.,1.,0.)); +#98672 = ADVANCED_FACE('',(#98673),#98692,.T.); +#98673 = FACE_BOUND('',#98674,.T.); +#98674 = EDGE_LOOP('',(#98675,#98684,#98690,#98691)); +#98675 = ORIENTED_EDGE('',*,*,#98676,.T.); +#98676 = EDGE_CURVE('',#98628,#98677,#98679,.T.); +#98677 = VERTEX_POINT('',#98678); +#98678 = CARTESIAN_POINT('',(5.85,0.75,3.5)); +#98679 = CIRCLE('',#98680,0.3); +#98680 = AXIS2_PLACEMENT_3D('',#98681,#98682,#98683); +#98681 = CARTESIAN_POINT('',(5.85,0.45,3.5)); +#98682 = DIRECTION('',(-0.,0.,1.)); +#98683 = DIRECTION('',(0.,-1.,0.)); +#98684 = ORIENTED_EDGE('',*,*,#98685,.T.); +#98685 = EDGE_CURVE('',#98677,#98436,#98686,.T.); +#98686 = LINE('',#98687,#98688); +#98687 = CARTESIAN_POINT('',(5.85,0.75,3.5)); +#98688 = VECTOR('',#98689,1.); +#98689 = DIRECTION('',(0.,0.,1.)); +#98690 = ORIENTED_EDGE('',*,*,#98443,.F.); +#98691 = ORIENTED_EDGE('',*,*,#98637,.F.); +#98692 = CYLINDRICAL_SURFACE('',#98693,0.3); +#98693 = AXIS2_PLACEMENT_3D('',#98694,#98695,#98696); +#98694 = CARTESIAN_POINT('',(5.85,0.45,3.5)); +#98695 = DIRECTION('',(0.,0.,1.)); +#98696 = DIRECTION('',(1.,0.,-0.)); +#98697 = ADVANCED_FACE('',(#98698),#98709,.F.); +#98698 = FACE_BOUND('',#98699,.F.); +#98699 = EDGE_LOOP('',(#98700,#98706,#98707,#98708)); +#98700 = ORIENTED_EDGE('',*,*,#98701,.F.); +#98701 = EDGE_CURVE('',#98677,#98652,#98702,.T.); +#98702 = LINE('',#98703,#98704); +#98703 = CARTESIAN_POINT('',(6.15,0.75,3.5)); +#98704 = VECTOR('',#98705,1.); +#98705 = DIRECTION('',(-1.,0.,0.)); +#98706 = ORIENTED_EDGE('',*,*,#98685,.T.); +#98707 = ORIENTED_EDGE('',*,*,#98435,.T.); +#98708 = ORIENTED_EDGE('',*,*,#98662,.F.); +#98709 = PLANE('',#98710); +#98710 = AXIS2_PLACEMENT_3D('',#98711,#98712,#98713); +#98711 = CARTESIAN_POINT('',(6.15,0.75,3.5)); +#98712 = DIRECTION('',(0.,-1.,0.)); +#98713 = DIRECTION('',(-1.,0.,0.)); +#98714 = ADVANCED_FACE('',(#98715),#98734,.T.); +#98715 = FACE_BOUND('',#98716,.T.); +#98716 = EDGE_LOOP('',(#98717,#98725,#98732,#98733)); +#98717 = ORIENTED_EDGE('',*,*,#98718,.T.); +#98718 = EDGE_CURVE('',#98470,#98719,#98721,.T.); +#98719 = VERTEX_POINT('',#98720); +#98720 = CARTESIAN_POINT('',(5.65,-4.25,4.1)); +#98721 = LINE('',#98722,#98723); +#98722 = CARTESIAN_POINT('',(5.65,-4.25,3.5)); +#98723 = VECTOR('',#98724,1.); +#98724 = DIRECTION('',(0.,0.,1.)); +#98725 = ORIENTED_EDGE('',*,*,#98726,.F.); +#98726 = EDGE_CURVE('',#98719,#98719,#98727,.T.); +#98727 = CIRCLE('',#98728,0.5); +#98728 = AXIS2_PLACEMENT_3D('',#98729,#98730,#98731); +#98729 = CARTESIAN_POINT('',(5.15,-4.25,4.1)); +#98730 = DIRECTION('',(0.,0.,1.)); +#98731 = DIRECTION('',(1.,0.,-0.)); +#98732 = ORIENTED_EDGE('',*,*,#98718,.F.); +#98733 = ORIENTED_EDGE('',*,*,#98469,.F.); +#98734 = CYLINDRICAL_SURFACE('',#98735,0.5); +#98735 = AXIS2_PLACEMENT_3D('',#98736,#98737,#98738); +#98736 = CARTESIAN_POINT('',(5.15,-4.25,3.5)); +#98737 = DIRECTION('',(-0.,-0.,-1.)); +#98738 = DIRECTION('',(1.,0.,0.)); +#98739 = ADVANCED_FACE('',(#98740),#98759,.T.); +#98740 = FACE_BOUND('',#98741,.T.); +#98741 = EDGE_LOOP('',(#98742,#98750,#98757,#98758)); +#98742 = ORIENTED_EDGE('',*,*,#98743,.T.); +#98743 = EDGE_CURVE('',#98481,#98744,#98746,.T.); +#98744 = VERTEX_POINT('',#98745); +#98745 = CARTESIAN_POINT('',(4.9,-2.25,4.2)); +#98746 = LINE('',#98747,#98748); +#98747 = CARTESIAN_POINT('',(4.9,-2.25,3.5)); +#98748 = VECTOR('',#98749,1.); +#98749 = DIRECTION('',(0.,0.,1.)); +#98750 = ORIENTED_EDGE('',*,*,#98751,.F.); +#98751 = EDGE_CURVE('',#98744,#98744,#98752,.T.); +#98752 = CIRCLE('',#98753,1.75); +#98753 = AXIS2_PLACEMENT_3D('',#98754,#98755,#98756); +#98754 = CARTESIAN_POINT('',(3.15,-2.25,4.2)); +#98755 = DIRECTION('',(0.,0.,1.)); +#98756 = DIRECTION('',(1.,0.,-0.)); +#98757 = ORIENTED_EDGE('',*,*,#98743,.F.); +#98758 = ORIENTED_EDGE('',*,*,#98480,.F.); +#98759 = CYLINDRICAL_SURFACE('',#98760,1.75); +#98760 = AXIS2_PLACEMENT_3D('',#98761,#98762,#98763); +#98761 = CARTESIAN_POINT('',(3.15,-2.25,3.5)); +#98762 = DIRECTION('',(-0.,-0.,-1.)); +#98763 = DIRECTION('',(1.,0.,0.)); +#98764 = ADVANCED_FACE('',(#98765),#98784,.T.); +#98765 = FACE_BOUND('',#98766,.T.); +#98766 = EDGE_LOOP('',(#98767,#98775,#98782,#98783)); +#98767 = ORIENTED_EDGE('',*,*,#98768,.T.); +#98768 = EDGE_CURVE('',#98492,#98769,#98771,.T.); +#98769 = VERTEX_POINT('',#98770); +#98770 = CARTESIAN_POINT('',(1.65,-0.25,4.1)); +#98771 = LINE('',#98772,#98773); +#98772 = CARTESIAN_POINT('',(1.65,-0.25,3.5)); +#98773 = VECTOR('',#98774,1.); +#98774 = DIRECTION('',(0.,0.,1.)); +#98775 = ORIENTED_EDGE('',*,*,#98776,.F.); +#98776 = EDGE_CURVE('',#98769,#98769,#98777,.T.); +#98777 = CIRCLE('',#98778,0.5); +#98778 = AXIS2_PLACEMENT_3D('',#98779,#98780,#98781); +#98779 = CARTESIAN_POINT('',(1.15,-0.25,4.1)); +#98780 = DIRECTION('',(0.,0.,1.)); +#98781 = DIRECTION('',(1.,0.,-0.)); +#98782 = ORIENTED_EDGE('',*,*,#98768,.F.); +#98783 = ORIENTED_EDGE('',*,*,#98491,.F.); +#98784 = CYLINDRICAL_SURFACE('',#98785,0.5); +#98785 = AXIS2_PLACEMENT_3D('',#98786,#98787,#98788); +#98786 = CARTESIAN_POINT('',(1.15,-0.25,3.5)); +#98787 = DIRECTION('',(-0.,-0.,-1.)); +#98788 = DIRECTION('',(1.,0.,0.)); +#98789 = ADVANCED_FACE('',(#98790),#98809,.T.); +#98790 = FACE_BOUND('',#98791,.T.); +#98791 = EDGE_LOOP('',(#98792,#98800,#98807,#98808)); +#98792 = ORIENTED_EDGE('',*,*,#98793,.T.); +#98793 = EDGE_CURVE('',#98503,#98794,#98796,.T.); +#98794 = VERTEX_POINT('',#98795); +#98795 = CARTESIAN_POINT('',(5.65,-0.25,4.1)); +#98796 = LINE('',#98797,#98798); +#98797 = CARTESIAN_POINT('',(5.65,-0.25,3.5)); +#98798 = VECTOR('',#98799,1.); +#98799 = DIRECTION('',(0.,0.,1.)); +#98800 = ORIENTED_EDGE('',*,*,#98801,.F.); +#98801 = EDGE_CURVE('',#98794,#98794,#98802,.T.); +#98802 = CIRCLE('',#98803,0.5); +#98803 = AXIS2_PLACEMENT_3D('',#98804,#98805,#98806); +#98804 = CARTESIAN_POINT('',(5.15,-0.25,4.1)); +#98805 = DIRECTION('',(0.,0.,1.)); +#98806 = DIRECTION('',(1.,0.,-0.)); +#98807 = ORIENTED_EDGE('',*,*,#98793,.F.); +#98808 = ORIENTED_EDGE('',*,*,#98502,.F.); +#98809 = CYLINDRICAL_SURFACE('',#98810,0.5); +#98810 = AXIS2_PLACEMENT_3D('',#98811,#98812,#98813); +#98811 = CARTESIAN_POINT('',(5.15,-0.25,3.5)); +#98812 = DIRECTION('',(-0.,-0.,-1.)); +#98813 = DIRECTION('',(1.,0.,0.)); +#98814 = ADVANCED_FACE('',(#98815),#98840,.F.); +#98815 = FACE_BOUND('',#98816,.F.); +#98816 = EDGE_LOOP('',(#98817,#98827,#98833,#98834)); +#98817 = ORIENTED_EDGE('',*,*,#98818,.F.); +#98818 = EDGE_CURVE('',#98819,#98821,#98823,.T.); +#98819 = VERTEX_POINT('',#98820); +#98820 = CARTESIAN_POINT('',(0.45,-5.25,0.)); +#98821 = VERTEX_POINT('',#98822); +#98822 = CARTESIAN_POINT('',(5.85,-5.25,0.)); +#98823 = LINE('',#98824,#98825); +#98824 = CARTESIAN_POINT('',(0.15,-5.25,0.)); +#98825 = VECTOR('',#98826,1.); +#98826 = DIRECTION('',(1.,0.,0.)); +#98827 = ORIENTED_EDGE('',*,*,#98828,.T.); +#98828 = EDGE_CURVE('',#98819,#98523,#98829,.T.); +#98829 = LINE('',#98830,#98831); +#98830 = CARTESIAN_POINT('',(0.45,-5.25,0.)); +#98831 = VECTOR('',#98832,1.); +#98832 = DIRECTION('',(0.,0.,1.)); +#98833 = ORIENTED_EDGE('',*,*,#98522,.T.); +#98834 = ORIENTED_EDGE('',*,*,#98835,.F.); +#98835 = EDGE_CURVE('',#98821,#98525,#98836,.T.); +#98836 = LINE('',#98837,#98838); +#98837 = CARTESIAN_POINT('',(5.85,-5.25,0.)); +#98838 = VECTOR('',#98839,1.); +#98839 = DIRECTION('',(0.,0.,1.)); +#98840 = PLANE('',#98841); +#98841 = AXIS2_PLACEMENT_3D('',#98842,#98843,#98844); +#98842 = CARTESIAN_POINT('',(0.15,-5.25,0.)); +#98843 = DIRECTION('',(0.,1.,0.)); +#98844 = DIRECTION('',(1.,0.,0.)); +#98845 = ADVANCED_FACE('',(#98846),#98865,.T.); +#98846 = FACE_BOUND('',#98847,.T.); +#98847 = EDGE_LOOP('',(#98848,#98849,#98850,#98858)); +#98848 = ORIENTED_EDGE('',*,*,#98828,.T.); +#98849 = ORIENTED_EDGE('',*,*,#98563,.T.); +#98850 = ORIENTED_EDGE('',*,*,#98851,.F.); +#98851 = EDGE_CURVE('',#98852,#98556,#98854,.T.); +#98852 = VERTEX_POINT('',#98853); +#98853 = CARTESIAN_POINT('',(0.15,-4.95,0.)); +#98854 = LINE('',#98855,#98856); +#98855 = CARTESIAN_POINT('',(0.15,-4.95,0.)); +#98856 = VECTOR('',#98857,1.); +#98857 = DIRECTION('',(0.,0.,1.)); +#98858 = ORIENTED_EDGE('',*,*,#98859,.F.); +#98859 = EDGE_CURVE('',#98819,#98852,#98860,.T.); +#98860 = CIRCLE('',#98861,0.3); +#98861 = AXIS2_PLACEMENT_3D('',#98862,#98863,#98864); +#98862 = CARTESIAN_POINT('',(0.45,-4.95,0.)); +#98863 = DIRECTION('',(-0.,-0.,-1.)); +#98864 = DIRECTION('',(0.,-1.,0.)); +#98865 = CYLINDRICAL_SURFACE('',#98866,0.3); +#98866 = AXIS2_PLACEMENT_3D('',#98867,#98868,#98869); +#98867 = CARTESIAN_POINT('',(0.45,-4.95,0.)); +#98868 = DIRECTION('',(0.,0.,1.)); +#98869 = DIRECTION('',(0.,-1.,0.)); +#98870 = ADVANCED_FACE('',(#98871),#98890,.T.); +#98871 = FACE_BOUND('',#98872,.T.); +#98872 = EDGE_LOOP('',(#98873,#98882,#98888,#98889)); +#98873 = ORIENTED_EDGE('',*,*,#98874,.T.); +#98874 = EDGE_CURVE('',#98821,#98875,#98877,.T.); +#98875 = VERTEX_POINT('',#98876); +#98876 = CARTESIAN_POINT('',(6.15,-4.95,0.)); +#98877 = CIRCLE('',#98878,0.3); +#98878 = AXIS2_PLACEMENT_3D('',#98879,#98880,#98881); +#98879 = CARTESIAN_POINT('',(5.85,-4.95,0.)); +#98880 = DIRECTION('',(-0.,0.,1.)); +#98881 = DIRECTION('',(0.,-1.,0.)); +#98882 = ORIENTED_EDGE('',*,*,#98883,.T.); +#98883 = EDGE_CURVE('',#98875,#98579,#98884,.T.); +#98884 = LINE('',#98885,#98886); +#98885 = CARTESIAN_POINT('',(6.15,-4.95,0.)); +#98886 = VECTOR('',#98887,1.); +#98887 = DIRECTION('',(0.,0.,1.)); +#98888 = ORIENTED_EDGE('',*,*,#98578,.F.); +#98889 = ORIENTED_EDGE('',*,*,#98835,.F.); +#98890 = CYLINDRICAL_SURFACE('',#98891,0.3); +#98891 = AXIS2_PLACEMENT_3D('',#98892,#98893,#98894); +#98892 = CARTESIAN_POINT('',(5.85,-4.95,0.)); +#98893 = DIRECTION('',(0.,0.,1.)); +#98894 = DIRECTION('',(0.,-1.,0.)); +#98895 = ADVANCED_FACE('',(#98896),#98978,.F.); +#98896 = FACE_BOUND('',#98897,.F.); +#98897 = EDGE_LOOP('',(#98898,#98908,#98914,#98915,#98916,#98924,#98932, + #98940,#98948,#98956,#98964,#98972)); +#98898 = ORIENTED_EDGE('',*,*,#98899,.F.); +#98899 = EDGE_CURVE('',#98900,#98902,#98904,.T.); +#98900 = VERTEX_POINT('',#98901); +#98901 = CARTESIAN_POINT('',(0.15,0.45,0.)); +#98902 = VERTEX_POINT('',#98903); +#98903 = CARTESIAN_POINT('',(0.15,0.35,0.)); +#98904 = LINE('',#98905,#98906); +#98905 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98906 = VECTOR('',#98907,1.); +#98907 = DIRECTION('',(0.,-1.,0.)); +#98908 = ORIENTED_EDGE('',*,*,#98909,.T.); +#98909 = EDGE_CURVE('',#98900,#98604,#98910,.T.); +#98910 = LINE('',#98911,#98912); +#98911 = CARTESIAN_POINT('',(0.15,0.45,0.)); +#98912 = VECTOR('',#98913,1.); +#98913 = DIRECTION('',(0.,0.,1.)); +#98914 = ORIENTED_EDGE('',*,*,#98603,.T.); +#98915 = ORIENTED_EDGE('',*,*,#98851,.F.); +#98916 = ORIENTED_EDGE('',*,*,#98917,.F.); +#98917 = EDGE_CURVE('',#98918,#98852,#98920,.T.); +#98918 = VERTEX_POINT('',#98919); +#98919 = CARTESIAN_POINT('',(0.15,-4.85,0.)); +#98920 = LINE('',#98921,#98922); +#98921 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98922 = VECTOR('',#98923,1.); +#98923 = DIRECTION('',(0.,-1.,0.)); +#98924 = ORIENTED_EDGE('',*,*,#98925,.F.); +#98925 = EDGE_CURVE('',#98926,#98918,#98928,.T.); +#98926 = VERTEX_POINT('',#98927); +#98927 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#98928 = LINE('',#98929,#98930); +#98929 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#98930 = VECTOR('',#98931,1.); +#98931 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98932 = ORIENTED_EDGE('',*,*,#98933,.T.); +#98933 = EDGE_CURVE('',#98926,#98934,#98936,.T.); +#98934 = VERTEX_POINT('',#98935); +#98935 = CARTESIAN_POINT('',(0.15,-4.15,1.5)); +#98936 = LINE('',#98937,#98938); +#98937 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#98938 = VECTOR('',#98939,1.); +#98939 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#98940 = ORIENTED_EDGE('',*,*,#98941,.T.); +#98941 = EDGE_CURVE('',#98934,#98942,#98944,.T.); +#98942 = VERTEX_POINT('',#98943); +#98943 = CARTESIAN_POINT('',(0.15,-4.15,0.)); +#98944 = LINE('',#98945,#98946); +#98945 = CARTESIAN_POINT('',(0.15,-4.15,1.5)); +#98946 = VECTOR('',#98947,1.); +#98947 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98948 = ORIENTED_EDGE('',*,*,#98949,.F.); +#98949 = EDGE_CURVE('',#98950,#98942,#98952,.T.); +#98950 = VERTEX_POINT('',#98951); +#98951 = CARTESIAN_POINT('',(0.15,-0.35,0.)); +#98952 = LINE('',#98953,#98954); +#98953 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98954 = VECTOR('',#98955,1.); +#98955 = DIRECTION('',(0.,-1.,0.)); +#98956 = ORIENTED_EDGE('',*,*,#98957,.F.); +#98957 = EDGE_CURVE('',#98958,#98950,#98960,.T.); +#98958 = VERTEX_POINT('',#98959); +#98959 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#98960 = LINE('',#98961,#98962); +#98961 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#98962 = VECTOR('',#98963,1.); +#98963 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98964 = ORIENTED_EDGE('',*,*,#98965,.T.); +#98965 = EDGE_CURVE('',#98958,#98966,#98968,.T.); +#98966 = VERTEX_POINT('',#98967); +#98967 = CARTESIAN_POINT('',(0.15,0.35,1.5)); +#98968 = LINE('',#98969,#98970); +#98969 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#98970 = VECTOR('',#98971,1.); +#98971 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#98972 = ORIENTED_EDGE('',*,*,#98973,.T.); +#98973 = EDGE_CURVE('',#98966,#98902,#98974,.T.); +#98974 = LINE('',#98975,#98976); +#98975 = CARTESIAN_POINT('',(0.15,0.35,1.5)); +#98976 = VECTOR('',#98977,1.); +#98977 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98978 = PLANE('',#98979); +#98979 = AXIS2_PLACEMENT_3D('',#98980,#98981,#98982); +#98980 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98981 = DIRECTION('',(1.,0.,0.)); +#98982 = DIRECTION('',(0.,-1.,0.)); +#98983 = ADVANCED_FACE('',(#98984),#99066,.F.); +#98984 = FACE_BOUND('',#98985,.F.); +#98985 = EDGE_LOOP('',(#98986,#98994,#98995,#98996,#99004,#99012,#99020, + #99028,#99036,#99044,#99052,#99060)); +#98986 = ORIENTED_EDGE('',*,*,#98987,.F.); +#98987 = EDGE_CURVE('',#98875,#98988,#98990,.T.); +#98988 = VERTEX_POINT('',#98989); +#98989 = CARTESIAN_POINT('',(6.15,-4.85,0.)); +#98990 = LINE('',#98991,#98992); +#98991 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#98992 = VECTOR('',#98993,1.); +#98993 = DIRECTION('',(0.,1.,0.)); +#98994 = ORIENTED_EDGE('',*,*,#98883,.T.); +#98995 = ORIENTED_EDGE('',*,*,#98627,.T.); +#98996 = ORIENTED_EDGE('',*,*,#98997,.F.); +#98997 = EDGE_CURVE('',#98998,#98628,#99000,.T.); +#98998 = VERTEX_POINT('',#98999); +#98999 = CARTESIAN_POINT('',(6.15,0.45,0.)); +#99000 = LINE('',#99001,#99002); +#99001 = CARTESIAN_POINT('',(6.15,0.45,0.)); +#99002 = VECTOR('',#99003,1.); +#99003 = DIRECTION('',(0.,0.,1.)); +#99004 = ORIENTED_EDGE('',*,*,#99005,.F.); +#99005 = EDGE_CURVE('',#99006,#98998,#99008,.T.); +#99006 = VERTEX_POINT('',#99007); +#99007 = CARTESIAN_POINT('',(6.15,0.35,0.)); +#99008 = LINE('',#99009,#99010); +#99009 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99010 = VECTOR('',#99011,1.); +#99011 = DIRECTION('',(0.,1.,0.)); +#99012 = ORIENTED_EDGE('',*,*,#99013,.F.); +#99013 = EDGE_CURVE('',#99014,#99006,#99016,.T.); +#99014 = VERTEX_POINT('',#99015); +#99015 = CARTESIAN_POINT('',(6.15,0.35,1.5)); +#99016 = LINE('',#99017,#99018); +#99017 = CARTESIAN_POINT('',(6.15,0.35,1.5)); +#99018 = VECTOR('',#99019,1.); +#99019 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99020 = ORIENTED_EDGE('',*,*,#99021,.F.); +#99021 = EDGE_CURVE('',#99022,#99014,#99024,.T.); +#99022 = VERTEX_POINT('',#99023); +#99023 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#99024 = LINE('',#99025,#99026); +#99025 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#99026 = VECTOR('',#99027,1.); +#99027 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99028 = ORIENTED_EDGE('',*,*,#99029,.T.); +#99029 = EDGE_CURVE('',#99022,#99030,#99032,.T.); +#99030 = VERTEX_POINT('',#99031); +#99031 = CARTESIAN_POINT('',(6.15,-0.35,0.)); +#99032 = LINE('',#99033,#99034); +#99033 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#99034 = VECTOR('',#99035,1.); +#99035 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99036 = ORIENTED_EDGE('',*,*,#99037,.F.); +#99037 = EDGE_CURVE('',#99038,#99030,#99040,.T.); +#99038 = VERTEX_POINT('',#99039); +#99039 = CARTESIAN_POINT('',(6.15,-4.15,0.)); +#99040 = LINE('',#99041,#99042); +#99041 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99042 = VECTOR('',#99043,1.); +#99043 = DIRECTION('',(0.,1.,0.)); +#99044 = ORIENTED_EDGE('',*,*,#99045,.F.); +#99045 = EDGE_CURVE('',#99046,#99038,#99048,.T.); +#99046 = VERTEX_POINT('',#99047); +#99047 = CARTESIAN_POINT('',(6.15,-4.15,1.5)); +#99048 = LINE('',#99049,#99050); +#99049 = CARTESIAN_POINT('',(6.15,-4.15,1.5)); +#99050 = VECTOR('',#99051,1.); +#99051 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99052 = ORIENTED_EDGE('',*,*,#99053,.F.); +#99053 = EDGE_CURVE('',#99054,#99046,#99056,.T.); +#99054 = VERTEX_POINT('',#99055); +#99055 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99056 = LINE('',#99057,#99058); +#99057 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99058 = VECTOR('',#99059,1.); +#99059 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99060 = ORIENTED_EDGE('',*,*,#99061,.T.); +#99061 = EDGE_CURVE('',#99054,#98988,#99062,.T.); +#99062 = LINE('',#99063,#99064); +#99063 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99064 = VECTOR('',#99065,1.); +#99065 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99066 = PLANE('',#99067); +#99067 = AXIS2_PLACEMENT_3D('',#99068,#99069,#99070); +#99068 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99069 = DIRECTION('',(-1.,0.,0.)); +#99070 = DIRECTION('',(0.,1.,0.)); +#99071 = ADVANCED_FACE('',(#99072),#99091,.T.); +#99072 = FACE_BOUND('',#99073,.T.); +#99073 = EDGE_LOOP('',(#99074,#99083,#99084,#99085)); +#99074 = ORIENTED_EDGE('',*,*,#99075,.T.); +#99075 = EDGE_CURVE('',#99076,#98900,#99078,.T.); +#99076 = VERTEX_POINT('',#99077); +#99077 = CARTESIAN_POINT('',(0.45,0.75,0.)); +#99078 = CIRCLE('',#99079,0.3); +#99079 = AXIS2_PLACEMENT_3D('',#99080,#99081,#99082); +#99080 = CARTESIAN_POINT('',(0.45,0.45,0.)); +#99081 = DIRECTION('',(-0.,0.,1.)); +#99082 = DIRECTION('',(0.,-1.,0.)); +#99083 = ORIENTED_EDGE('',*,*,#98909,.T.); +#99084 = ORIENTED_EDGE('',*,*,#98651,.F.); +#99085 = ORIENTED_EDGE('',*,*,#99086,.F.); +#99086 = EDGE_CURVE('',#99076,#98652,#99087,.T.); +#99087 = LINE('',#99088,#99089); +#99088 = CARTESIAN_POINT('',(0.45,0.75,0.)); +#99089 = VECTOR('',#99090,1.); +#99090 = DIRECTION('',(0.,0.,1.)); +#99091 = CYLINDRICAL_SURFACE('',#99092,0.3); +#99092 = AXIS2_PLACEMENT_3D('',#99093,#99094,#99095); +#99093 = CARTESIAN_POINT('',(0.45,0.45,0.)); +#99094 = DIRECTION('',(0.,0.,1.)); +#99095 = DIRECTION('',(0.,1.,0.)); +#99096 = ADVANCED_FACE('',(#99097),#99116,.T.); +#99097 = FACE_BOUND('',#99098,.T.); +#99098 = EDGE_LOOP('',(#99099,#99108,#99114,#99115)); +#99099 = ORIENTED_EDGE('',*,*,#99100,.T.); +#99100 = EDGE_CURVE('',#98998,#99101,#99103,.T.); +#99101 = VERTEX_POINT('',#99102); +#99102 = CARTESIAN_POINT('',(5.85,0.75,0.)); +#99103 = CIRCLE('',#99104,0.3); +#99104 = AXIS2_PLACEMENT_3D('',#99105,#99106,#99107); +#99105 = CARTESIAN_POINT('',(5.85,0.45,0.)); +#99106 = DIRECTION('',(-0.,0.,1.)); +#99107 = DIRECTION('',(0.,-1.,0.)); +#99108 = ORIENTED_EDGE('',*,*,#99109,.T.); +#99109 = EDGE_CURVE('',#99101,#98677,#99110,.T.); +#99110 = LINE('',#99111,#99112); +#99111 = CARTESIAN_POINT('',(5.85,0.75,0.)); +#99112 = VECTOR('',#99113,1.); +#99113 = DIRECTION('',(0.,0.,1.)); +#99114 = ORIENTED_EDGE('',*,*,#98676,.F.); +#99115 = ORIENTED_EDGE('',*,*,#98997,.F.); +#99116 = CYLINDRICAL_SURFACE('',#99117,0.3); +#99117 = AXIS2_PLACEMENT_3D('',#99118,#99119,#99120); +#99118 = CARTESIAN_POINT('',(5.85,0.45,0.)); +#99119 = DIRECTION('',(0.,0.,1.)); +#99120 = DIRECTION('',(1.,0.,-0.)); +#99121 = ADVANCED_FACE('',(#99122),#99133,.F.); +#99122 = FACE_BOUND('',#99123,.F.); +#99123 = EDGE_LOOP('',(#99124,#99130,#99131,#99132)); +#99124 = ORIENTED_EDGE('',*,*,#99125,.F.); +#99125 = EDGE_CURVE('',#99101,#99076,#99126,.T.); +#99126 = LINE('',#99127,#99128); +#99127 = CARTESIAN_POINT('',(6.15,0.75,0.)); +#99128 = VECTOR('',#99129,1.); +#99129 = DIRECTION('',(-1.,0.,0.)); +#99130 = ORIENTED_EDGE('',*,*,#99109,.T.); +#99131 = ORIENTED_EDGE('',*,*,#98701,.T.); +#99132 = ORIENTED_EDGE('',*,*,#99086,.F.); +#99133 = PLANE('',#99134); +#99134 = AXIS2_PLACEMENT_3D('',#99135,#99136,#99137); +#99135 = CARTESIAN_POINT('',(6.15,0.75,0.)); +#99136 = DIRECTION('',(0.,-1.,0.)); +#99137 = DIRECTION('',(-1.,0.,0.)); +#99138 = ADVANCED_FACE('',(#99139),#99142,.F.); +#99139 = FACE_BOUND('',#99140,.T.); +#99140 = EDGE_LOOP('',(#99141)); +#99141 = ORIENTED_EDGE('',*,*,#98726,.T.); +#99142 = PLANE('',#99143); +#99143 = AXIS2_PLACEMENT_3D('',#99144,#99145,#99146); +#99144 = CARTESIAN_POINT('',(5.65,-4.25,4.1)); +#99145 = DIRECTION('',(0.,0.,-1.)); +#99146 = DIRECTION('',(-1.,0.,0.)); +#99147 = ADVANCED_FACE('',(#99148),#99168,.T.); +#99148 = FACE_BOUND('',#99149,.T.); +#99149 = EDGE_LOOP('',(#99150,#99151,#99160,#99167)); +#99150 = ORIENTED_EDGE('',*,*,#98751,.T.); +#99151 = ORIENTED_EDGE('',*,*,#99152,.F.); +#99152 = EDGE_CURVE('',#99153,#98744,#99155,.T.); +#99153 = VERTEX_POINT('',#99154); +#99154 = CARTESIAN_POINT('',(4.8,-2.25,4.3)); +#99155 = CIRCLE('',#99156,0.1); +#99156 = AXIS2_PLACEMENT_3D('',#99157,#99158,#99159); +#99157 = CARTESIAN_POINT('',(4.8,-2.25,4.2)); +#99158 = DIRECTION('',(-0.,1.,0.)); +#99159 = DIRECTION('',(1.,0.,0.)); +#99160 = ORIENTED_EDGE('',*,*,#99161,.F.); +#99161 = EDGE_CURVE('',#99153,#99153,#99162,.T.); +#99162 = CIRCLE('',#99163,1.65); +#99163 = AXIS2_PLACEMENT_3D('',#99164,#99165,#99166); +#99164 = CARTESIAN_POINT('',(3.15,-2.25,4.3)); +#99165 = DIRECTION('',(0.,0.,1.)); +#99166 = DIRECTION('',(1.,0.,-0.)); +#99167 = ORIENTED_EDGE('',*,*,#99152,.T.); +#99168 = TOROIDAL_SURFACE('',#99169,1.65,0.1); +#99169 = AXIS2_PLACEMENT_3D('',#99170,#99171,#99172); +#99170 = CARTESIAN_POINT('',(3.15,-2.25,4.2)); +#99171 = DIRECTION('',(0.,0.,-1.)); +#99172 = DIRECTION('',(1.,0.,0.)); +#99173 = ADVANCED_FACE('',(#99174),#99177,.F.); +#99174 = FACE_BOUND('',#99175,.T.); +#99175 = EDGE_LOOP('',(#99176)); +#99176 = ORIENTED_EDGE('',*,*,#98776,.T.); +#99177 = PLANE('',#99178); +#99178 = AXIS2_PLACEMENT_3D('',#99179,#99180,#99181); +#99179 = CARTESIAN_POINT('',(1.65,-0.25,4.1)); +#99180 = DIRECTION('',(0.,0.,-1.)); +#99181 = DIRECTION('',(-1.,0.,0.)); +#99182 = ADVANCED_FACE('',(#99183),#99186,.F.); +#99183 = FACE_BOUND('',#99184,.T.); +#99184 = EDGE_LOOP('',(#99185)); +#99185 = ORIENTED_EDGE('',*,*,#98801,.T.); +#99186 = PLANE('',#99187); +#99187 = AXIS2_PLACEMENT_3D('',#99188,#99189,#99190); +#99188 = CARTESIAN_POINT('',(5.65,-0.25,4.1)); +#99189 = DIRECTION('',(0.,0.,-1.)); +#99190 = DIRECTION('',(-1.,0.,0.)); +#99191 = ADVANCED_FACE('',(#99192),#99230,.T.); +#99192 = FACE_BOUND('',#99193,.T.); +#99193 = EDGE_LOOP('',(#99194,#99195,#99196,#99197,#99203,#99204,#99210, + #99211,#99212,#99213,#99214,#99215,#99221,#99222,#99228,#99229)); +#99194 = ORIENTED_EDGE('',*,*,#98818,.F.); +#99195 = ORIENTED_EDGE('',*,*,#98859,.T.); +#99196 = ORIENTED_EDGE('',*,*,#98917,.F.); +#99197 = ORIENTED_EDGE('',*,*,#99198,.F.); +#99198 = EDGE_CURVE('',#98942,#98918,#99199,.T.); +#99199 = LINE('',#99200,#99201); +#99200 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#99201 = VECTOR('',#99202,1.); +#99202 = DIRECTION('',(0.,-1.,0.)); +#99203 = ORIENTED_EDGE('',*,*,#98949,.F.); +#99204 = ORIENTED_EDGE('',*,*,#99205,.F.); +#99205 = EDGE_CURVE('',#98902,#98950,#99206,.T.); +#99206 = LINE('',#99207,#99208); +#99207 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#99208 = VECTOR('',#99209,1.); +#99209 = DIRECTION('',(0.,-1.,0.)); +#99210 = ORIENTED_EDGE('',*,*,#98899,.F.); +#99211 = ORIENTED_EDGE('',*,*,#99075,.F.); +#99212 = ORIENTED_EDGE('',*,*,#99125,.F.); +#99213 = ORIENTED_EDGE('',*,*,#99100,.F.); +#99214 = ORIENTED_EDGE('',*,*,#99005,.F.); +#99215 = ORIENTED_EDGE('',*,*,#99216,.F.); +#99216 = EDGE_CURVE('',#99030,#99006,#99217,.T.); +#99217 = LINE('',#99218,#99219); +#99218 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99219 = VECTOR('',#99220,1.); +#99220 = DIRECTION('',(0.,1.,0.)); +#99221 = ORIENTED_EDGE('',*,*,#99037,.F.); +#99222 = ORIENTED_EDGE('',*,*,#99223,.F.); +#99223 = EDGE_CURVE('',#98988,#99038,#99224,.T.); +#99224 = LINE('',#99225,#99226); +#99225 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99226 = VECTOR('',#99227,1.); +#99227 = DIRECTION('',(0.,1.,0.)); +#99228 = ORIENTED_EDGE('',*,*,#98987,.F.); +#99229 = ORIENTED_EDGE('',*,*,#98874,.F.); +#99230 = PLANE('',#99231); +#99231 = AXIS2_PLACEMENT_3D('',#99232,#99233,#99234); +#99232 = CARTESIAN_POINT('',(0.15,-5.25,0.)); +#99233 = DIRECTION('',(0.,0.,-1.)); +#99234 = DIRECTION('',(-1.,0.,0.)); +#99235 = ADVANCED_FACE('',(#99236),#99380,.F.); +#99236 = FACE_BOUND('',#99237,.F.); +#99237 = EDGE_LOOP('',(#99238,#99248,#99257,#99265,#99274,#99282,#99290, + #99298,#99307,#99315,#99324,#99332,#99341,#99347,#99348,#99356, + #99365,#99373)); +#99238 = ORIENTED_EDGE('',*,*,#99239,.T.); +#99239 = EDGE_CURVE('',#99240,#99242,#99244,.T.); +#99240 = VERTEX_POINT('',#99241); +#99241 = CARTESIAN_POINT('',(-0.162230377286,0.35,-0.540767924286)); +#99242 = VERTEX_POINT('',#99243); +#99243 = CARTESIAN_POINT('',(-0.425000733956,0.35,-1.416669113186)); +#99244 = LINE('',#99245,#99246); +#99245 = CARTESIAN_POINT('',(-0.15,0.35,-0.5)); +#99246 = VECTOR('',#99247,1.); +#99247 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99248 = ORIENTED_EDGE('',*,*,#99249,.T.); +#99249 = EDGE_CURVE('',#99242,#99250,#99252,.T.); +#99250 = VERTEX_POINT('',#99251); +#99251 = CARTESIAN_POINT('',(-0.425000733956,0.35,-1.583330886814)); +#99252 = CIRCLE('',#99253,0.29); +#99253 = AXIS2_PLACEMENT_3D('',#99254,#99255,#99256); +#99254 = CARTESIAN_POINT('',(-0.147231111242,0.35,-1.5)); +#99255 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99256 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99257 = ORIENTED_EDGE('',*,*,#99258,.T.); +#99258 = EDGE_CURVE('',#99250,#99259,#99261,.T.); +#99259 = VERTEX_POINT('',#99260); +#99260 = CARTESIAN_POINT('',(-0.162230377286,0.35,-2.459232075714)); +#99261 = LINE('',#99262,#99263); +#99262 = CARTESIAN_POINT('',(-0.45,0.35,-1.5)); +#99263 = VECTOR('',#99264,1.); +#99264 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99265 = ORIENTED_EDGE('',*,*,#99266,.F.); +#99266 = EDGE_CURVE('',#99267,#99259,#99269,.T.); +#99267 = VERTEX_POINT('',#99268); +#99268 = CARTESIAN_POINT('',(-0.15,0.35,-2.542562962528)); +#99269 = CIRCLE('',#99270,0.29); +#99270 = AXIS2_PLACEMENT_3D('',#99271,#99272,#99273); +#99271 = CARTESIAN_POINT('',(-0.44,0.35,-2.542562962528)); +#99272 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99273 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99274 = ORIENTED_EDGE('',*,*,#99275,.F.); +#99275 = EDGE_CURVE('',#99276,#99267,#99278,.T.); +#99276 = VERTEX_POINT('',#99277); +#99277 = CARTESIAN_POINT('',(-0.15,0.35,-3.5)); +#99278 = LINE('',#99279,#99280); +#99279 = CARTESIAN_POINT('',(-0.15,0.35,-3.5)); +#99280 = VECTOR('',#99281,1.); +#99281 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99282 = ORIENTED_EDGE('',*,*,#99283,.F.); +#99283 = EDGE_CURVE('',#99284,#99276,#99286,.T.); +#99284 = VERTEX_POINT('',#99285); +#99285 = CARTESIAN_POINT('',(0.15,0.35,-3.5)); +#99286 = LINE('',#99287,#99288); +#99287 = CARTESIAN_POINT('',(0.15,0.35,-3.5)); +#99288 = VECTOR('',#99289,1.); +#99289 = DIRECTION('',(-1.,-0.,0.)); +#99290 = ORIENTED_EDGE('',*,*,#99291,.F.); +#99291 = EDGE_CURVE('',#99292,#99284,#99294,.T.); +#99292 = VERTEX_POINT('',#99293); +#99293 = CARTESIAN_POINT('',(0.15,0.35,-2.542562962528)); +#99294 = LINE('',#99295,#99296); +#99295 = CARTESIAN_POINT('',(0.15,0.35,-2.5)); +#99296 = VECTOR('',#99297,1.); +#99297 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99298 = ORIENTED_EDGE('',*,*,#99299,.F.); +#99299 = EDGE_CURVE('',#99300,#99292,#99302,.T.); +#99300 = VERTEX_POINT('',#99301); +#99301 = CARTESIAN_POINT('',(0.137769622714,0.35,-2.459232075714)); +#99302 = CIRCLE('',#99303,0.29); +#99303 = AXIS2_PLACEMENT_3D('',#99304,#99305,#99306); +#99304 = CARTESIAN_POINT('',(-0.14,0.35,-2.542562962528)); +#99305 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99306 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99307 = ORIENTED_EDGE('',*,*,#99308,.T.); +#99308 = EDGE_CURVE('',#99300,#99309,#99311,.T.); +#99309 = VERTEX_POINT('',#99310); +#99310 = CARTESIAN_POINT('',(-0.125000733956,0.35,-1.583330886814)); +#99311 = LINE('',#99312,#99313); +#99312 = CARTESIAN_POINT('',(0.15,0.35,-2.5)); +#99313 = VECTOR('',#99314,1.); +#99314 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99315 = ORIENTED_EDGE('',*,*,#99316,.F.); +#99316 = EDGE_CURVE('',#99317,#99309,#99319,.T.); +#99317 = VERTEX_POINT('',#99318); +#99318 = CARTESIAN_POINT('',(-0.125000733956,0.35,-1.416669113186)); +#99319 = CIRCLE('',#99320,0.29); +#99320 = AXIS2_PLACEMENT_3D('',#99321,#99322,#99323); +#99321 = CARTESIAN_POINT('',(0.152768888758,0.35,-1.5)); +#99322 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99323 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99324 = ORIENTED_EDGE('',*,*,#99325,.T.); +#99325 = EDGE_CURVE('',#99317,#99326,#99328,.T.); +#99326 = VERTEX_POINT('',#99327); +#99327 = CARTESIAN_POINT('',(0.137769622714,0.35,-0.540767924286)); +#99328 = LINE('',#99329,#99330); +#99329 = CARTESIAN_POINT('',(-0.15,0.35,-1.5)); +#99330 = VECTOR('',#99331,1.); +#99331 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99332 = ORIENTED_EDGE('',*,*,#99333,.F.); +#99333 = EDGE_CURVE('',#99334,#99326,#99336,.T.); +#99334 = VERTEX_POINT('',#99335); +#99335 = CARTESIAN_POINT('',(0.15,0.35,-0.457437037472)); +#99336 = CIRCLE('',#99337,0.29); +#99337 = AXIS2_PLACEMENT_3D('',#99338,#99339,#99340); +#99338 = CARTESIAN_POINT('',(-0.14,0.35,-0.457437037472)); +#99339 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99340 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99341 = ORIENTED_EDGE('',*,*,#99342,.F.); +#99342 = EDGE_CURVE('',#98902,#99334,#99343,.T.); +#99343 = LINE('',#99344,#99345); +#99344 = CARTESIAN_POINT('',(0.15,0.35,1.5)); +#99345 = VECTOR('',#99346,1.); +#99346 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99347 = ORIENTED_EDGE('',*,*,#98973,.F.); +#99348 = ORIENTED_EDGE('',*,*,#99349,.F.); +#99349 = EDGE_CURVE('',#99350,#98966,#99352,.T.); +#99350 = VERTEX_POINT('',#99351); +#99351 = CARTESIAN_POINT('',(0.14,0.35,1.5)); +#99352 = LINE('',#99353,#99354); +#99353 = CARTESIAN_POINT('',(-0.15,0.35,1.5)); +#99354 = VECTOR('',#99355,1.); +#99355 = DIRECTION('',(1.,0.,0.)); +#99356 = ORIENTED_EDGE('',*,*,#99357,.F.); +#99357 = EDGE_CURVE('',#99358,#99350,#99360,.T.); +#99358 = VERTEX_POINT('',#99359); +#99359 = CARTESIAN_POINT('',(-0.15,0.35,1.21)); +#99360 = CIRCLE('',#99361,0.29); +#99361 = AXIS2_PLACEMENT_3D('',#99362,#99363,#99364); +#99362 = CARTESIAN_POINT('',(0.14,0.35,1.21)); +#99363 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99364 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99365 = ORIENTED_EDGE('',*,*,#99366,.F.); +#99366 = EDGE_CURVE('',#99367,#99358,#99369,.T.); +#99367 = VERTEX_POINT('',#99368); +#99368 = CARTESIAN_POINT('',(-0.15,0.35,-0.457437037472)); +#99369 = LINE('',#99370,#99371); +#99370 = CARTESIAN_POINT('',(-0.15,0.35,-0.5)); +#99371 = VECTOR('',#99372,1.); +#99372 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99373 = ORIENTED_EDGE('',*,*,#99374,.F.); +#99374 = EDGE_CURVE('',#99240,#99367,#99375,.T.); +#99375 = CIRCLE('',#99376,0.29); +#99376 = AXIS2_PLACEMENT_3D('',#99377,#99378,#99379); +#99377 = CARTESIAN_POINT('',(-0.44,0.35,-0.457437037472)); +#99378 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99379 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99380 = PLANE('',#99381); +#99381 = AXIS2_PLACEMENT_3D('',#99382,#99383,#99384); +#99382 = CARTESIAN_POINT('',(-0.15,0.35,-0.5)); +#99383 = DIRECTION('',(1.64346021921E-31,-1.,-5.551115123126E-16)); +#99384 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99385 = ADVANCED_FACE('',(#99386),#99404,.F.); +#99386 = FACE_BOUND('',#99387,.F.); +#99387 = EDGE_LOOP('',(#99388,#99396,#99402,#99403)); +#99388 = ORIENTED_EDGE('',*,*,#99389,.F.); +#99389 = EDGE_CURVE('',#99390,#98958,#99392,.T.); +#99390 = VERTEX_POINT('',#99391); +#99391 = CARTESIAN_POINT('',(0.14,-0.35,1.5)); +#99392 = LINE('',#99393,#99394); +#99393 = CARTESIAN_POINT('',(-0.15,-0.35,1.5)); +#99394 = VECTOR('',#99395,1.); +#99395 = DIRECTION('',(1.,0.,0.)); +#99396 = ORIENTED_EDGE('',*,*,#99397,.T.); +#99397 = EDGE_CURVE('',#99390,#99350,#99398,.T.); +#99398 = LINE('',#99399,#99400); +#99399 = CARTESIAN_POINT('',(0.14,-0.35,1.5)); +#99400 = VECTOR('',#99401,1.); +#99401 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99402 = ORIENTED_EDGE('',*,*,#99349,.T.); +#99403 = ORIENTED_EDGE('',*,*,#98965,.F.); +#99404 = PLANE('',#99405); +#99405 = AXIS2_PLACEMENT_3D('',#99406,#99407,#99408); +#99406 = CARTESIAN_POINT('',(-0.15,-0.35,1.5)); +#99407 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99408 = DIRECTION('',(1.,0.,0.)); +#99409 = ADVANCED_FACE('',(#99410),#99547,.T.); +#99410 = FACE_BOUND('',#99411,.T.); +#99411 = EDGE_LOOP('',(#99412,#99422,#99431,#99439,#99448,#99456,#99464, + #99472,#99481,#99489,#99498,#99506,#99515,#99521,#99522,#99523, + #99532,#99540)); +#99412 = ORIENTED_EDGE('',*,*,#99413,.T.); +#99413 = EDGE_CURVE('',#99414,#99416,#99418,.T.); +#99414 = VERTEX_POINT('',#99415); +#99415 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-0.540767924286)); +#99416 = VERTEX_POINT('',#99417); +#99417 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.416669113186)); +#99418 = LINE('',#99419,#99420); +#99419 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#99420 = VECTOR('',#99421,1.); +#99421 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99422 = ORIENTED_EDGE('',*,*,#99423,.T.); +#99423 = EDGE_CURVE('',#99416,#99424,#99426,.T.); +#99424 = VERTEX_POINT('',#99425); +#99425 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.583330886814)); +#99426 = CIRCLE('',#99427,0.29); +#99427 = AXIS2_PLACEMENT_3D('',#99428,#99429,#99430); +#99428 = CARTESIAN_POINT('',(-0.147231111242,-0.35,-1.5)); +#99429 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99430 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99431 = ORIENTED_EDGE('',*,*,#99432,.T.); +#99432 = EDGE_CURVE('',#99424,#99433,#99435,.T.); +#99433 = VERTEX_POINT('',#99434); +#99434 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-2.459232075714)); +#99435 = LINE('',#99436,#99437); +#99436 = CARTESIAN_POINT('',(-0.45,-0.35,-1.5)); +#99437 = VECTOR('',#99438,1.); +#99438 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99439 = ORIENTED_EDGE('',*,*,#99440,.F.); +#99440 = EDGE_CURVE('',#99441,#99433,#99443,.T.); +#99441 = VERTEX_POINT('',#99442); +#99442 = CARTESIAN_POINT('',(-0.15,-0.35,-2.542562962528)); +#99443 = CIRCLE('',#99444,0.29); +#99444 = AXIS2_PLACEMENT_3D('',#99445,#99446,#99447); +#99445 = CARTESIAN_POINT('',(-0.44,-0.35,-2.542562962528)); +#99446 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99447 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99448 = ORIENTED_EDGE('',*,*,#99449,.F.); +#99449 = EDGE_CURVE('',#99450,#99441,#99452,.T.); +#99450 = VERTEX_POINT('',#99451); +#99451 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#99452 = LINE('',#99453,#99454); +#99453 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#99454 = VECTOR('',#99455,1.); +#99455 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99456 = ORIENTED_EDGE('',*,*,#99457,.F.); +#99457 = EDGE_CURVE('',#99458,#99450,#99460,.T.); +#99458 = VERTEX_POINT('',#99459); +#99459 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#99460 = LINE('',#99461,#99462); +#99461 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#99462 = VECTOR('',#99463,1.); +#99463 = DIRECTION('',(-1.,-0.,0.)); +#99464 = ORIENTED_EDGE('',*,*,#99465,.F.); +#99465 = EDGE_CURVE('',#99466,#99458,#99468,.T.); +#99466 = VERTEX_POINT('',#99467); +#99467 = CARTESIAN_POINT('',(0.15,-0.35,-2.542562962528)); +#99468 = LINE('',#99469,#99470); +#99469 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#99470 = VECTOR('',#99471,1.); +#99471 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99472 = ORIENTED_EDGE('',*,*,#99473,.F.); +#99473 = EDGE_CURVE('',#99474,#99466,#99476,.T.); +#99474 = VERTEX_POINT('',#99475); +#99475 = CARTESIAN_POINT('',(0.137769622714,-0.35,-2.459232075714)); +#99476 = CIRCLE('',#99477,0.29); +#99477 = AXIS2_PLACEMENT_3D('',#99478,#99479,#99480); +#99478 = CARTESIAN_POINT('',(-0.14,-0.35,-2.542562962528)); +#99479 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99480 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99481 = ORIENTED_EDGE('',*,*,#99482,.T.); +#99482 = EDGE_CURVE('',#99474,#99483,#99485,.T.); +#99483 = VERTEX_POINT('',#99484); +#99484 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.583330886814)); +#99485 = LINE('',#99486,#99487); +#99486 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#99487 = VECTOR('',#99488,1.); +#99488 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99489 = ORIENTED_EDGE('',*,*,#99490,.F.); +#99490 = EDGE_CURVE('',#99491,#99483,#99493,.T.); +#99491 = VERTEX_POINT('',#99492); +#99492 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.416669113186)); +#99493 = CIRCLE('',#99494,0.29); +#99494 = AXIS2_PLACEMENT_3D('',#99495,#99496,#99497); +#99495 = CARTESIAN_POINT('',(0.152768888758,-0.35,-1.5)); +#99496 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99497 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99498 = ORIENTED_EDGE('',*,*,#99499,.T.); +#99499 = EDGE_CURVE('',#99491,#99500,#99502,.T.); +#99500 = VERTEX_POINT('',#99501); +#99501 = CARTESIAN_POINT('',(0.137769622714,-0.35,-0.540767924286)); +#99502 = LINE('',#99503,#99504); +#99503 = CARTESIAN_POINT('',(-0.15,-0.35,-1.5)); +#99504 = VECTOR('',#99505,1.); +#99505 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99506 = ORIENTED_EDGE('',*,*,#99507,.F.); +#99507 = EDGE_CURVE('',#99508,#99500,#99510,.T.); +#99508 = VERTEX_POINT('',#99509); +#99509 = CARTESIAN_POINT('',(0.15,-0.35,-0.457437037472)); +#99510 = CIRCLE('',#99511,0.29); +#99511 = AXIS2_PLACEMENT_3D('',#99512,#99513,#99514); +#99512 = CARTESIAN_POINT('',(-0.14,-0.35,-0.457437037472)); +#99513 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99514 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99515 = ORIENTED_EDGE('',*,*,#99516,.F.); +#99516 = EDGE_CURVE('',#98950,#99508,#99517,.T.); +#99517 = LINE('',#99518,#99519); +#99518 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#99519 = VECTOR('',#99520,1.); +#99520 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99521 = ORIENTED_EDGE('',*,*,#98957,.F.); +#99522 = ORIENTED_EDGE('',*,*,#99389,.F.); +#99523 = ORIENTED_EDGE('',*,*,#99524,.F.); +#99524 = EDGE_CURVE('',#99525,#99390,#99527,.T.); +#99525 = VERTEX_POINT('',#99526); +#99526 = CARTESIAN_POINT('',(-0.15,-0.35,1.21)); +#99527 = CIRCLE('',#99528,0.29); +#99528 = AXIS2_PLACEMENT_3D('',#99529,#99530,#99531); +#99529 = CARTESIAN_POINT('',(0.14,-0.35,1.21)); +#99530 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99531 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99532 = ORIENTED_EDGE('',*,*,#99533,.F.); +#99533 = EDGE_CURVE('',#99534,#99525,#99536,.T.); +#99534 = VERTEX_POINT('',#99535); +#99535 = CARTESIAN_POINT('',(-0.15,-0.35,-0.457437037472)); +#99536 = LINE('',#99537,#99538); +#99537 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#99538 = VECTOR('',#99539,1.); +#99539 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99540 = ORIENTED_EDGE('',*,*,#99541,.F.); +#99541 = EDGE_CURVE('',#99414,#99534,#99542,.T.); +#99542 = CIRCLE('',#99543,0.29); +#99543 = AXIS2_PLACEMENT_3D('',#99544,#99545,#99546); +#99544 = CARTESIAN_POINT('',(-0.44,-0.35,-0.457437037472)); +#99545 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99546 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99547 = PLANE('',#99548); +#99548 = AXIS2_PLACEMENT_3D('',#99549,#99550,#99551); +#99549 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#99550 = DIRECTION('',(1.64346021921E-31,-1.,-5.551115123126E-16)); +#99551 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99552 = ADVANCED_FACE('',(#99553),#99697,.T.); +#99553 = FACE_BOUND('',#99554,.T.); +#99554 = EDGE_LOOP('',(#99555,#99565,#99574,#99582,#99591,#99599,#99607, + #99615,#99624,#99632,#99641,#99649,#99658,#99664,#99665,#99673, + #99682,#99690)); +#99555 = ORIENTED_EDGE('',*,*,#99556,.T.); +#99556 = EDGE_CURVE('',#99557,#99559,#99561,.T.); +#99557 = VERTEX_POINT('',#99558); +#99558 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-0.540767924286)); +#99559 = VERTEX_POINT('',#99560); +#99560 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.416669113186)); +#99561 = LINE('',#99562,#99563); +#99562 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#99563 = VECTOR('',#99564,1.); +#99564 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99565 = ORIENTED_EDGE('',*,*,#99566,.T.); +#99566 = EDGE_CURVE('',#99559,#99567,#99569,.T.); +#99567 = VERTEX_POINT('',#99568); +#99568 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.583330886814)); +#99569 = CIRCLE('',#99570,0.29); +#99570 = AXIS2_PLACEMENT_3D('',#99571,#99572,#99573); +#99571 = CARTESIAN_POINT('',(-0.147231111242,-4.85,-1.5)); +#99572 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99573 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99574 = ORIENTED_EDGE('',*,*,#99575,.T.); +#99575 = EDGE_CURVE('',#99567,#99576,#99578,.T.); +#99576 = VERTEX_POINT('',#99577); +#99577 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-2.459232075714)); +#99578 = LINE('',#99579,#99580); +#99579 = CARTESIAN_POINT('',(-0.45,-4.85,-1.5)); +#99580 = VECTOR('',#99581,1.); +#99581 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99582 = ORIENTED_EDGE('',*,*,#99583,.F.); +#99583 = EDGE_CURVE('',#99584,#99576,#99586,.T.); +#99584 = VERTEX_POINT('',#99585); +#99585 = CARTESIAN_POINT('',(-0.15,-4.85,-2.542562962528)); +#99586 = CIRCLE('',#99587,0.29); +#99587 = AXIS2_PLACEMENT_3D('',#99588,#99589,#99590); +#99588 = CARTESIAN_POINT('',(-0.44,-4.85,-2.542562962528)); +#99589 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99590 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99591 = ORIENTED_EDGE('',*,*,#99592,.F.); +#99592 = EDGE_CURVE('',#99593,#99584,#99595,.T.); +#99593 = VERTEX_POINT('',#99594); +#99594 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#99595 = LINE('',#99596,#99597); +#99596 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#99597 = VECTOR('',#99598,1.); +#99598 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99599 = ORIENTED_EDGE('',*,*,#99600,.F.); +#99600 = EDGE_CURVE('',#99601,#99593,#99603,.T.); +#99601 = VERTEX_POINT('',#99602); +#99602 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#99603 = LINE('',#99604,#99605); +#99604 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#99605 = VECTOR('',#99606,1.); +#99606 = DIRECTION('',(-1.,-0.,0.)); +#99607 = ORIENTED_EDGE('',*,*,#99608,.F.); +#99608 = EDGE_CURVE('',#99609,#99601,#99611,.T.); +#99609 = VERTEX_POINT('',#99610); +#99610 = CARTESIAN_POINT('',(0.15,-4.85,-2.542562962528)); +#99611 = LINE('',#99612,#99613); +#99612 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#99613 = VECTOR('',#99614,1.); +#99614 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99615 = ORIENTED_EDGE('',*,*,#99616,.F.); +#99616 = EDGE_CURVE('',#99617,#99609,#99619,.T.); +#99617 = VERTEX_POINT('',#99618); +#99618 = CARTESIAN_POINT('',(0.137769622714,-4.85,-2.459232075714)); +#99619 = CIRCLE('',#99620,0.29); +#99620 = AXIS2_PLACEMENT_3D('',#99621,#99622,#99623); +#99621 = CARTESIAN_POINT('',(-0.14,-4.85,-2.542562962528)); +#99622 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99623 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99624 = ORIENTED_EDGE('',*,*,#99625,.T.); +#99625 = EDGE_CURVE('',#99617,#99626,#99628,.T.); +#99626 = VERTEX_POINT('',#99627); +#99627 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.583330886814)); +#99628 = LINE('',#99629,#99630); +#99629 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#99630 = VECTOR('',#99631,1.); +#99631 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99632 = ORIENTED_EDGE('',*,*,#99633,.F.); +#99633 = EDGE_CURVE('',#99634,#99626,#99636,.T.); +#99634 = VERTEX_POINT('',#99635); +#99635 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.416669113186)); +#99636 = CIRCLE('',#99637,0.29); +#99637 = AXIS2_PLACEMENT_3D('',#99638,#99639,#99640); +#99638 = CARTESIAN_POINT('',(0.152768888758,-4.85,-1.5)); +#99639 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99640 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99641 = ORIENTED_EDGE('',*,*,#99642,.T.); +#99642 = EDGE_CURVE('',#99634,#99643,#99645,.T.); +#99643 = VERTEX_POINT('',#99644); +#99644 = CARTESIAN_POINT('',(0.137769622714,-4.85,-0.540767924286)); +#99645 = LINE('',#99646,#99647); +#99646 = CARTESIAN_POINT('',(-0.15,-4.85,-1.5)); +#99647 = VECTOR('',#99648,1.); +#99648 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99649 = ORIENTED_EDGE('',*,*,#99650,.F.); +#99650 = EDGE_CURVE('',#99651,#99643,#99653,.T.); +#99651 = VERTEX_POINT('',#99652); +#99652 = CARTESIAN_POINT('',(0.15,-4.85,-0.457437037472)); +#99653 = CIRCLE('',#99654,0.29); +#99654 = AXIS2_PLACEMENT_3D('',#99655,#99656,#99657); +#99655 = CARTESIAN_POINT('',(-0.14,-4.85,-0.457437037472)); +#99656 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99657 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99658 = ORIENTED_EDGE('',*,*,#99659,.F.); +#99659 = EDGE_CURVE('',#98918,#99651,#99660,.T.); +#99660 = LINE('',#99661,#99662); +#99661 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#99662 = VECTOR('',#99663,1.); +#99663 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99664 = ORIENTED_EDGE('',*,*,#98925,.F.); +#99665 = ORIENTED_EDGE('',*,*,#99666,.F.); +#99666 = EDGE_CURVE('',#99667,#98926,#99669,.T.); +#99667 = VERTEX_POINT('',#99668); +#99668 = CARTESIAN_POINT('',(0.14,-4.85,1.5)); +#99669 = LINE('',#99670,#99671); +#99670 = CARTESIAN_POINT('',(-0.15,-4.85,1.5)); +#99671 = VECTOR('',#99672,1.); +#99672 = DIRECTION('',(1.,0.,0.)); +#99673 = ORIENTED_EDGE('',*,*,#99674,.F.); +#99674 = EDGE_CURVE('',#99675,#99667,#99677,.T.); +#99675 = VERTEX_POINT('',#99676); +#99676 = CARTESIAN_POINT('',(-0.15,-4.85,1.21)); +#99677 = CIRCLE('',#99678,0.29); +#99678 = AXIS2_PLACEMENT_3D('',#99679,#99680,#99681); +#99679 = CARTESIAN_POINT('',(0.14,-4.85,1.21)); +#99680 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99681 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99682 = ORIENTED_EDGE('',*,*,#99683,.F.); +#99683 = EDGE_CURVE('',#99684,#99675,#99686,.T.); +#99684 = VERTEX_POINT('',#99685); +#99685 = CARTESIAN_POINT('',(-0.15,-4.85,-0.457437037472)); +#99686 = LINE('',#99687,#99688); +#99687 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#99688 = VECTOR('',#99689,1.); +#99689 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99690 = ORIENTED_EDGE('',*,*,#99691,.F.); +#99691 = EDGE_CURVE('',#99557,#99684,#99692,.T.); +#99692 = CIRCLE('',#99693,0.29); +#99693 = AXIS2_PLACEMENT_3D('',#99694,#99695,#99696); +#99694 = CARTESIAN_POINT('',(-0.44,-4.85,-0.457437037472)); +#99695 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99696 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99697 = PLANE('',#99698); +#99698 = AXIS2_PLACEMENT_3D('',#99699,#99700,#99701); +#99699 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#99700 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99701 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99702 = ADVANCED_FACE('',(#99703),#99847,.F.); +#99703 = FACE_BOUND('',#99704,.F.); +#99704 = EDGE_LOOP('',(#99705,#99715,#99724,#99732,#99741,#99749,#99757, + #99765,#99774,#99782,#99791,#99799,#99808,#99814,#99815,#99823, + #99832,#99840)); +#99705 = ORIENTED_EDGE('',*,*,#99706,.T.); +#99706 = EDGE_CURVE('',#99707,#99709,#99711,.T.); +#99707 = VERTEX_POINT('',#99708); +#99708 = CARTESIAN_POINT('',(-0.162230377286,-4.15,-0.540767924286)); +#99709 = VERTEX_POINT('',#99710); +#99710 = CARTESIAN_POINT('',(-0.425000733956,-4.15,-1.416669113186)); +#99711 = LINE('',#99712,#99713); +#99712 = CARTESIAN_POINT('',(-0.15,-4.15,-0.5)); +#99713 = VECTOR('',#99714,1.); +#99714 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99715 = ORIENTED_EDGE('',*,*,#99716,.T.); +#99716 = EDGE_CURVE('',#99709,#99717,#99719,.T.); +#99717 = VERTEX_POINT('',#99718); +#99718 = CARTESIAN_POINT('',(-0.425000733956,-4.15,-1.583330886814)); +#99719 = CIRCLE('',#99720,0.29); +#99720 = AXIS2_PLACEMENT_3D('',#99721,#99722,#99723); +#99721 = CARTESIAN_POINT('',(-0.147231111242,-4.15,-1.5)); +#99722 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99723 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99724 = ORIENTED_EDGE('',*,*,#99725,.T.); +#99725 = EDGE_CURVE('',#99717,#99726,#99728,.T.); +#99726 = VERTEX_POINT('',#99727); +#99727 = CARTESIAN_POINT('',(-0.162230377286,-4.15,-2.459232075714)); +#99728 = LINE('',#99729,#99730); +#99729 = CARTESIAN_POINT('',(-0.45,-4.15,-1.5)); +#99730 = VECTOR('',#99731,1.); +#99731 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99732 = ORIENTED_EDGE('',*,*,#99733,.F.); +#99733 = EDGE_CURVE('',#99734,#99726,#99736,.T.); +#99734 = VERTEX_POINT('',#99735); +#99735 = CARTESIAN_POINT('',(-0.15,-4.15,-2.542562962528)); +#99736 = CIRCLE('',#99737,0.29); +#99737 = AXIS2_PLACEMENT_3D('',#99738,#99739,#99740); +#99738 = CARTESIAN_POINT('',(-0.44,-4.15,-2.542562962528)); +#99739 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99740 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99741 = ORIENTED_EDGE('',*,*,#99742,.F.); +#99742 = EDGE_CURVE('',#99743,#99734,#99745,.T.); +#99743 = VERTEX_POINT('',#99744); +#99744 = CARTESIAN_POINT('',(-0.15,-4.15,-3.5)); +#99745 = LINE('',#99746,#99747); +#99746 = CARTESIAN_POINT('',(-0.15,-4.15,-3.5)); +#99747 = VECTOR('',#99748,1.); +#99748 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99749 = ORIENTED_EDGE('',*,*,#99750,.F.); +#99750 = EDGE_CURVE('',#99751,#99743,#99753,.T.); +#99751 = VERTEX_POINT('',#99752); +#99752 = CARTESIAN_POINT('',(0.15,-4.15,-3.5)); +#99753 = LINE('',#99754,#99755); +#99754 = CARTESIAN_POINT('',(0.15,-4.15,-3.5)); +#99755 = VECTOR('',#99756,1.); +#99756 = DIRECTION('',(-1.,-0.,0.)); +#99757 = ORIENTED_EDGE('',*,*,#99758,.F.); +#99758 = EDGE_CURVE('',#99759,#99751,#99761,.T.); +#99759 = VERTEX_POINT('',#99760); +#99760 = CARTESIAN_POINT('',(0.15,-4.15,-2.542562962528)); +#99761 = LINE('',#99762,#99763); +#99762 = CARTESIAN_POINT('',(0.15,-4.15,-2.5)); +#99763 = VECTOR('',#99764,1.); +#99764 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99765 = ORIENTED_EDGE('',*,*,#99766,.F.); +#99766 = EDGE_CURVE('',#99767,#99759,#99769,.T.); +#99767 = VERTEX_POINT('',#99768); +#99768 = CARTESIAN_POINT('',(0.137769622714,-4.15,-2.459232075714)); +#99769 = CIRCLE('',#99770,0.29); +#99770 = AXIS2_PLACEMENT_3D('',#99771,#99772,#99773); +#99771 = CARTESIAN_POINT('',(-0.14,-4.15,-2.542562962528)); +#99772 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99773 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99774 = ORIENTED_EDGE('',*,*,#99775,.T.); +#99775 = EDGE_CURVE('',#99767,#99776,#99778,.T.); +#99776 = VERTEX_POINT('',#99777); +#99777 = CARTESIAN_POINT('',(-0.125000733956,-4.15,-1.583330886814)); +#99778 = LINE('',#99779,#99780); +#99779 = CARTESIAN_POINT('',(0.15,-4.15,-2.5)); +#99780 = VECTOR('',#99781,1.); +#99781 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99782 = ORIENTED_EDGE('',*,*,#99783,.F.); +#99783 = EDGE_CURVE('',#99784,#99776,#99786,.T.); +#99784 = VERTEX_POINT('',#99785); +#99785 = CARTESIAN_POINT('',(-0.125000733956,-4.15,-1.416669113186)); +#99786 = CIRCLE('',#99787,0.29); +#99787 = AXIS2_PLACEMENT_3D('',#99788,#99789,#99790); +#99788 = CARTESIAN_POINT('',(0.152768888758,-4.15,-1.5)); +#99789 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99790 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99791 = ORIENTED_EDGE('',*,*,#99792,.T.); +#99792 = EDGE_CURVE('',#99784,#99793,#99795,.T.); +#99793 = VERTEX_POINT('',#99794); +#99794 = CARTESIAN_POINT('',(0.137769622714,-4.15,-0.540767924286)); +#99795 = LINE('',#99796,#99797); +#99796 = CARTESIAN_POINT('',(-0.15,-4.15,-1.5)); +#99797 = VECTOR('',#99798,1.); +#99798 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99799 = ORIENTED_EDGE('',*,*,#99800,.F.); +#99800 = EDGE_CURVE('',#99801,#99793,#99803,.T.); +#99801 = VERTEX_POINT('',#99802); +#99802 = CARTESIAN_POINT('',(0.15,-4.15,-0.457437037472)); +#99803 = CIRCLE('',#99804,0.29); +#99804 = AXIS2_PLACEMENT_3D('',#99805,#99806,#99807); +#99805 = CARTESIAN_POINT('',(-0.14,-4.15,-0.457437037472)); +#99806 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99807 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99808 = ORIENTED_EDGE('',*,*,#99809,.F.); +#99809 = EDGE_CURVE('',#98942,#99801,#99810,.T.); +#99810 = LINE('',#99811,#99812); +#99811 = CARTESIAN_POINT('',(0.15,-4.15,1.5)); +#99812 = VECTOR('',#99813,1.); +#99813 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99814 = ORIENTED_EDGE('',*,*,#98941,.F.); +#99815 = ORIENTED_EDGE('',*,*,#99816,.F.); +#99816 = EDGE_CURVE('',#99817,#98934,#99819,.T.); +#99817 = VERTEX_POINT('',#99818); +#99818 = CARTESIAN_POINT('',(0.14,-4.15,1.5)); +#99819 = LINE('',#99820,#99821); +#99820 = CARTESIAN_POINT('',(-0.15,-4.15,1.5)); +#99821 = VECTOR('',#99822,1.); +#99822 = DIRECTION('',(1.,0.,0.)); +#99823 = ORIENTED_EDGE('',*,*,#99824,.F.); +#99824 = EDGE_CURVE('',#99825,#99817,#99827,.T.); +#99825 = VERTEX_POINT('',#99826); +#99826 = CARTESIAN_POINT('',(-0.15,-4.15,1.21)); +#99827 = CIRCLE('',#99828,0.29); +#99828 = AXIS2_PLACEMENT_3D('',#99829,#99830,#99831); +#99829 = CARTESIAN_POINT('',(0.14,-4.15,1.21)); +#99830 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99831 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99832 = ORIENTED_EDGE('',*,*,#99833,.F.); +#99833 = EDGE_CURVE('',#99834,#99825,#99836,.T.); +#99834 = VERTEX_POINT('',#99835); +#99835 = CARTESIAN_POINT('',(-0.15,-4.15,-0.457437037472)); +#99836 = LINE('',#99837,#99838); +#99837 = CARTESIAN_POINT('',(-0.15,-4.15,-0.5)); +#99838 = VECTOR('',#99839,1.); +#99839 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99840 = ORIENTED_EDGE('',*,*,#99841,.F.); +#99841 = EDGE_CURVE('',#99707,#99834,#99842,.T.); +#99842 = CIRCLE('',#99843,0.29); +#99843 = AXIS2_PLACEMENT_3D('',#99844,#99845,#99846); +#99844 = CARTESIAN_POINT('',(-0.44,-4.15,-0.457437037472)); +#99845 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99846 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99847 = PLANE('',#99848); +#99848 = AXIS2_PLACEMENT_3D('',#99849,#99850,#99851); +#99849 = CARTESIAN_POINT('',(-0.15,-4.15,-0.5)); +#99850 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99851 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99852 = ADVANCED_FACE('',(#99853),#99864,.F.); +#99853 = FACE_BOUND('',#99854,.F.); +#99854 = EDGE_LOOP('',(#99855,#99856,#99862,#99863)); +#99855 = ORIENTED_EDGE('',*,*,#99666,.F.); +#99856 = ORIENTED_EDGE('',*,*,#99857,.T.); +#99857 = EDGE_CURVE('',#99667,#99817,#99858,.T.); +#99858 = LINE('',#99859,#99860); +#99859 = CARTESIAN_POINT('',(0.14,-4.85,1.5)); +#99860 = VECTOR('',#99861,1.); +#99861 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99862 = ORIENTED_EDGE('',*,*,#99816,.T.); +#99863 = ORIENTED_EDGE('',*,*,#98933,.F.); +#99864 = PLANE('',#99865); +#99865 = AXIS2_PLACEMENT_3D('',#99866,#99867,#99868); +#99866 = CARTESIAN_POINT('',(-0.15,-4.85,1.5)); +#99867 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99868 = DIRECTION('',(1.,0.,0.)); +#99869 = ADVANCED_FACE('',(#99870),#100014,.F.); +#99870 = FACE_BOUND('',#99871,.F.); +#99871 = EDGE_LOOP('',(#99872,#99882,#99891,#99899,#99908,#99916,#99924, + #99932,#99941,#99949,#99958,#99966,#99975,#99981,#99982,#99990, + #99999,#100007)); +#99872 = ORIENTED_EDGE('',*,*,#99873,.T.); +#99873 = EDGE_CURVE('',#99874,#99876,#99878,.T.); +#99874 = VERTEX_POINT('',#99875); +#99875 = CARTESIAN_POINT('',(6.462230377286,-4.85,-0.540767924286)); +#99876 = VERTEX_POINT('',#99877); +#99877 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.416669113186)); +#99878 = LINE('',#99879,#99880); +#99879 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#99880 = VECTOR('',#99881,1.); +#99881 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99882 = ORIENTED_EDGE('',*,*,#99883,.T.); +#99883 = EDGE_CURVE('',#99876,#99884,#99886,.T.); +#99884 = VERTEX_POINT('',#99885); +#99885 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.583330886814)); +#99886 = CIRCLE('',#99887,0.29); +#99887 = AXIS2_PLACEMENT_3D('',#99888,#99889,#99890); +#99888 = CARTESIAN_POINT('',(6.447231111242,-4.85,-1.5)); +#99889 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99890 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99891 = ORIENTED_EDGE('',*,*,#99892,.T.); +#99892 = EDGE_CURVE('',#99884,#99893,#99895,.T.); +#99893 = VERTEX_POINT('',#99894); +#99894 = CARTESIAN_POINT('',(6.462230377286,-4.85,-2.459232075714)); +#99895 = LINE('',#99896,#99897); +#99896 = CARTESIAN_POINT('',(6.75,-4.85,-1.5)); +#99897 = VECTOR('',#99898,1.); +#99898 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99899 = ORIENTED_EDGE('',*,*,#99900,.F.); +#99900 = EDGE_CURVE('',#99901,#99893,#99903,.T.); +#99901 = VERTEX_POINT('',#99902); +#99902 = CARTESIAN_POINT('',(6.45,-4.85,-2.542562962528)); +#99903 = CIRCLE('',#99904,0.29); +#99904 = AXIS2_PLACEMENT_3D('',#99905,#99906,#99907); +#99905 = CARTESIAN_POINT('',(6.74,-4.85,-2.542562962528)); +#99906 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99907 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99908 = ORIENTED_EDGE('',*,*,#99909,.F.); +#99909 = EDGE_CURVE('',#99910,#99901,#99912,.T.); +#99910 = VERTEX_POINT('',#99911); +#99911 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#99912 = LINE('',#99913,#99914); +#99913 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#99914 = VECTOR('',#99915,1.); +#99915 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99916 = ORIENTED_EDGE('',*,*,#99917,.F.); +#99917 = EDGE_CURVE('',#99918,#99910,#99920,.T.); +#99918 = VERTEX_POINT('',#99919); +#99919 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#99920 = LINE('',#99921,#99922); +#99921 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#99922 = VECTOR('',#99923,1.); +#99923 = DIRECTION('',(1.,0.,0.)); +#99924 = ORIENTED_EDGE('',*,*,#99925,.F.); +#99925 = EDGE_CURVE('',#99926,#99918,#99928,.T.); +#99926 = VERTEX_POINT('',#99927); +#99927 = CARTESIAN_POINT('',(6.15,-4.85,-2.542562962528)); +#99928 = LINE('',#99929,#99930); +#99929 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#99930 = VECTOR('',#99931,1.); +#99931 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99932 = ORIENTED_EDGE('',*,*,#99933,.F.); +#99933 = EDGE_CURVE('',#99934,#99926,#99936,.T.); +#99934 = VERTEX_POINT('',#99935); +#99935 = CARTESIAN_POINT('',(6.162230377286,-4.85,-2.459232075714)); +#99936 = CIRCLE('',#99937,0.29); +#99937 = AXIS2_PLACEMENT_3D('',#99938,#99939,#99940); +#99938 = CARTESIAN_POINT('',(6.44,-4.85,-2.542562962528)); +#99939 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99940 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99941 = ORIENTED_EDGE('',*,*,#99942,.T.); +#99942 = EDGE_CURVE('',#99934,#99943,#99945,.T.); +#99943 = VERTEX_POINT('',#99944); +#99944 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.583330886814)); +#99945 = LINE('',#99946,#99947); +#99946 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#99947 = VECTOR('',#99948,1.); +#99948 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99949 = ORIENTED_EDGE('',*,*,#99950,.F.); +#99950 = EDGE_CURVE('',#99951,#99943,#99953,.T.); +#99951 = VERTEX_POINT('',#99952); +#99952 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.416669113186)); +#99953 = CIRCLE('',#99954,0.29); +#99954 = AXIS2_PLACEMENT_3D('',#99955,#99956,#99957); +#99955 = CARTESIAN_POINT('',(6.147231111242,-4.85,-1.5)); +#99956 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99957 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99958 = ORIENTED_EDGE('',*,*,#99959,.T.); +#99959 = EDGE_CURVE('',#99951,#99960,#99962,.T.); +#99960 = VERTEX_POINT('',#99961); +#99961 = CARTESIAN_POINT('',(6.162230377286,-4.85,-0.540767924286)); +#99962 = LINE('',#99963,#99964); +#99963 = CARTESIAN_POINT('',(6.45,-4.85,-1.5)); +#99964 = VECTOR('',#99965,1.); +#99965 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99966 = ORIENTED_EDGE('',*,*,#99967,.F.); +#99967 = EDGE_CURVE('',#99968,#99960,#99970,.T.); +#99968 = VERTEX_POINT('',#99969); +#99969 = CARTESIAN_POINT('',(6.15,-4.85,-0.457437037472)); +#99970 = CIRCLE('',#99971,0.29); +#99971 = AXIS2_PLACEMENT_3D('',#99972,#99973,#99974); +#99972 = CARTESIAN_POINT('',(6.44,-4.85,-0.457437037472)); +#99973 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99974 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99975 = ORIENTED_EDGE('',*,*,#99976,.F.); +#99976 = EDGE_CURVE('',#98988,#99968,#99977,.T.); +#99977 = LINE('',#99978,#99979); +#99978 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99979 = VECTOR('',#99980,1.); +#99980 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99981 = ORIENTED_EDGE('',*,*,#99061,.F.); +#99982 = ORIENTED_EDGE('',*,*,#99983,.F.); +#99983 = EDGE_CURVE('',#99984,#99054,#99986,.T.); +#99984 = VERTEX_POINT('',#99985); +#99985 = CARTESIAN_POINT('',(6.16,-4.85,1.5)); +#99986 = LINE('',#99987,#99988); +#99987 = CARTESIAN_POINT('',(6.45,-4.85,1.5)); +#99988 = VECTOR('',#99989,1.); +#99989 = DIRECTION('',(-1.,-0.,0.)); +#99990 = ORIENTED_EDGE('',*,*,#99991,.F.); +#99991 = EDGE_CURVE('',#99992,#99984,#99994,.T.); +#99992 = VERTEX_POINT('',#99993); +#99993 = CARTESIAN_POINT('',(6.45,-4.85,1.21)); +#99994 = CIRCLE('',#99995,0.29); +#99995 = AXIS2_PLACEMENT_3D('',#99996,#99997,#99998); +#99996 = CARTESIAN_POINT('',(6.16,-4.85,1.21)); +#99997 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99998 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99999 = ORIENTED_EDGE('',*,*,#100000,.F.); +#100000 = EDGE_CURVE('',#100001,#99992,#100003,.T.); +#100001 = VERTEX_POINT('',#100002); +#100002 = CARTESIAN_POINT('',(6.45,-4.85,-0.457437037472)); +#100003 = LINE('',#100004,#100005); +#100004 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#100005 = VECTOR('',#100006,1.); +#100006 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100007 = ORIENTED_EDGE('',*,*,#100008,.F.); +#100008 = EDGE_CURVE('',#99874,#100001,#100009,.T.); +#100009 = CIRCLE('',#100010,0.29); +#100010 = AXIS2_PLACEMENT_3D('',#100011,#100012,#100013); +#100011 = CARTESIAN_POINT('',(6.74,-4.85,-0.457437037472)); +#100012 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100013 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100014 = PLANE('',#100015); +#100015 = AXIS2_PLACEMENT_3D('',#100016,#100017,#100018); +#100016 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#100017 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100018 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100019 = ADVANCED_FACE('',(#100020),#100038,.T.); +#100020 = FACE_BOUND('',#100021,.T.); +#100021 = EDGE_LOOP('',(#100022,#100023,#100031,#100037)); +#100022 = ORIENTED_EDGE('',*,*,#99983,.F.); +#100023 = ORIENTED_EDGE('',*,*,#100024,.T.); +#100024 = EDGE_CURVE('',#99984,#100025,#100027,.T.); +#100025 = VERTEX_POINT('',#100026); +#100026 = CARTESIAN_POINT('',(6.16,-4.15,1.5)); +#100027 = LINE('',#100028,#100029); +#100028 = CARTESIAN_POINT('',(6.16,-4.85,1.5)); +#100029 = VECTOR('',#100030,1.); +#100030 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100031 = ORIENTED_EDGE('',*,*,#100032,.T.); +#100032 = EDGE_CURVE('',#100025,#99046,#100033,.T.); +#100033 = LINE('',#100034,#100035); +#100034 = CARTESIAN_POINT('',(6.45,-4.15,1.5)); +#100035 = VECTOR('',#100036,1.); +#100036 = DIRECTION('',(-1.,-0.,0.)); +#100037 = ORIENTED_EDGE('',*,*,#99053,.F.); +#100038 = PLANE('',#100039); +#100039 = AXIS2_PLACEMENT_3D('',#100040,#100041,#100042); +#100040 = CARTESIAN_POINT('',(6.45,-4.85,1.5)); +#100041 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100042 = DIRECTION('',(-1.,0.,0.)); +#100043 = ADVANCED_FACE('',(#100044),#100181,.T.); +#100044 = FACE_BOUND('',#100045,.T.); +#100045 = EDGE_LOOP('',(#100046,#100056,#100065,#100073,#100082,#100090, + #100098,#100106,#100115,#100123,#100132,#100140,#100149,#100155, + #100156,#100157,#100166,#100174)); +#100046 = ORIENTED_EDGE('',*,*,#100047,.T.); +#100047 = EDGE_CURVE('',#100048,#100050,#100052,.T.); +#100048 = VERTEX_POINT('',#100049); +#100049 = CARTESIAN_POINT('',(6.462230377286,-4.15,-0.540767924286)); +#100050 = VERTEX_POINT('',#100051); +#100051 = CARTESIAN_POINT('',(6.725000733956,-4.15,-1.416669113186)); +#100052 = LINE('',#100053,#100054); +#100053 = CARTESIAN_POINT('',(6.45,-4.15,-0.5)); +#100054 = VECTOR('',#100055,1.); +#100055 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100056 = ORIENTED_EDGE('',*,*,#100057,.T.); +#100057 = EDGE_CURVE('',#100050,#100058,#100060,.T.); +#100058 = VERTEX_POINT('',#100059); +#100059 = CARTESIAN_POINT('',(6.725000733956,-4.15,-1.583330886814)); +#100060 = CIRCLE('',#100061,0.29); +#100061 = AXIS2_PLACEMENT_3D('',#100062,#100063,#100064); +#100062 = CARTESIAN_POINT('',(6.447231111242,-4.15,-1.5)); +#100063 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100064 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100065 = ORIENTED_EDGE('',*,*,#100066,.T.); +#100066 = EDGE_CURVE('',#100058,#100067,#100069,.T.); +#100067 = VERTEX_POINT('',#100068); +#100068 = CARTESIAN_POINT('',(6.462230377286,-4.15,-2.459232075714)); +#100069 = LINE('',#100070,#100071); +#100070 = CARTESIAN_POINT('',(6.75,-4.15,-1.5)); +#100071 = VECTOR('',#100072,1.); +#100072 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100073 = ORIENTED_EDGE('',*,*,#100074,.F.); +#100074 = EDGE_CURVE('',#100075,#100067,#100077,.T.); +#100075 = VERTEX_POINT('',#100076); +#100076 = CARTESIAN_POINT('',(6.45,-4.15,-2.542562962528)); +#100077 = CIRCLE('',#100078,0.29); +#100078 = AXIS2_PLACEMENT_3D('',#100079,#100080,#100081); +#100079 = CARTESIAN_POINT('',(6.74,-4.15,-2.542562962528)); +#100080 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100081 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100082 = ORIENTED_EDGE('',*,*,#100083,.F.); +#100083 = EDGE_CURVE('',#100084,#100075,#100086,.T.); +#100084 = VERTEX_POINT('',#100085); +#100085 = CARTESIAN_POINT('',(6.45,-4.15,-3.5)); +#100086 = LINE('',#100087,#100088); +#100087 = CARTESIAN_POINT('',(6.45,-4.15,-3.5)); +#100088 = VECTOR('',#100089,1.); +#100089 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100090 = ORIENTED_EDGE('',*,*,#100091,.F.); +#100091 = EDGE_CURVE('',#100092,#100084,#100094,.T.); +#100092 = VERTEX_POINT('',#100093); +#100093 = CARTESIAN_POINT('',(6.15,-4.15,-3.5)); +#100094 = LINE('',#100095,#100096); +#100095 = CARTESIAN_POINT('',(6.15,-4.15,-3.5)); +#100096 = VECTOR('',#100097,1.); +#100097 = DIRECTION('',(1.,0.,0.)); +#100098 = ORIENTED_EDGE('',*,*,#100099,.F.); +#100099 = EDGE_CURVE('',#100100,#100092,#100102,.T.); +#100100 = VERTEX_POINT('',#100101); +#100101 = CARTESIAN_POINT('',(6.15,-4.15,-2.542562962528)); +#100102 = LINE('',#100103,#100104); +#100103 = CARTESIAN_POINT('',(6.15,-4.15,-2.5)); +#100104 = VECTOR('',#100105,1.); +#100105 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100106 = ORIENTED_EDGE('',*,*,#100107,.F.); +#100107 = EDGE_CURVE('',#100108,#100100,#100110,.T.); +#100108 = VERTEX_POINT('',#100109); +#100109 = CARTESIAN_POINT('',(6.162230377286,-4.15,-2.459232075714)); +#100110 = CIRCLE('',#100111,0.29); +#100111 = AXIS2_PLACEMENT_3D('',#100112,#100113,#100114); +#100112 = CARTESIAN_POINT('',(6.44,-4.15,-2.542562962528)); +#100113 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100114 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100115 = ORIENTED_EDGE('',*,*,#100116,.T.); +#100116 = EDGE_CURVE('',#100108,#100117,#100119,.T.); +#100117 = VERTEX_POINT('',#100118); +#100118 = CARTESIAN_POINT('',(6.425000733956,-4.15,-1.583330886814)); +#100119 = LINE('',#100120,#100121); +#100120 = CARTESIAN_POINT('',(6.15,-4.15,-2.5)); +#100121 = VECTOR('',#100122,1.); +#100122 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100123 = ORIENTED_EDGE('',*,*,#100124,.F.); +#100124 = EDGE_CURVE('',#100125,#100117,#100127,.T.); +#100125 = VERTEX_POINT('',#100126); +#100126 = CARTESIAN_POINT('',(6.425000733956,-4.15,-1.416669113186)); +#100127 = CIRCLE('',#100128,0.29); +#100128 = AXIS2_PLACEMENT_3D('',#100129,#100130,#100131); +#100129 = CARTESIAN_POINT('',(6.147231111242,-4.15,-1.5)); +#100130 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100131 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100132 = ORIENTED_EDGE('',*,*,#100133,.T.); +#100133 = EDGE_CURVE('',#100125,#100134,#100136,.T.); +#100134 = VERTEX_POINT('',#100135); +#100135 = CARTESIAN_POINT('',(6.162230377286,-4.15,-0.540767924286)); +#100136 = LINE('',#100137,#100138); +#100137 = CARTESIAN_POINT('',(6.45,-4.15,-1.5)); +#100138 = VECTOR('',#100139,1.); +#100139 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100140 = ORIENTED_EDGE('',*,*,#100141,.F.); +#100141 = EDGE_CURVE('',#100142,#100134,#100144,.T.); +#100142 = VERTEX_POINT('',#100143); +#100143 = CARTESIAN_POINT('',(6.15,-4.15,-0.457437037472)); +#100144 = CIRCLE('',#100145,0.29); +#100145 = AXIS2_PLACEMENT_3D('',#100146,#100147,#100148); +#100146 = CARTESIAN_POINT('',(6.44,-4.15,-0.457437037472)); +#100147 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100148 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100149 = ORIENTED_EDGE('',*,*,#100150,.F.); +#100150 = EDGE_CURVE('',#99038,#100142,#100151,.T.); +#100151 = LINE('',#100152,#100153); +#100152 = CARTESIAN_POINT('',(6.15,-4.15,1.5)); +#100153 = VECTOR('',#100154,1.); +#100154 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100155 = ORIENTED_EDGE('',*,*,#99045,.F.); +#100156 = ORIENTED_EDGE('',*,*,#100032,.F.); +#100157 = ORIENTED_EDGE('',*,*,#100158,.F.); +#100158 = EDGE_CURVE('',#100159,#100025,#100161,.T.); +#100159 = VERTEX_POINT('',#100160); +#100160 = CARTESIAN_POINT('',(6.45,-4.15,1.21)); +#100161 = CIRCLE('',#100162,0.29); +#100162 = AXIS2_PLACEMENT_3D('',#100163,#100164,#100165); +#100163 = CARTESIAN_POINT('',(6.16,-4.15,1.21)); +#100164 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100165 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100166 = ORIENTED_EDGE('',*,*,#100167,.F.); +#100167 = EDGE_CURVE('',#100168,#100159,#100170,.T.); +#100168 = VERTEX_POINT('',#100169); +#100169 = CARTESIAN_POINT('',(6.45,-4.15,-0.457437037472)); +#100170 = LINE('',#100171,#100172); +#100171 = CARTESIAN_POINT('',(6.45,-4.15,-0.5)); +#100172 = VECTOR('',#100173,1.); +#100173 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100174 = ORIENTED_EDGE('',*,*,#100175,.F.); +#100175 = EDGE_CURVE('',#100048,#100168,#100176,.T.); +#100176 = CIRCLE('',#100177,0.29); +#100177 = AXIS2_PLACEMENT_3D('',#100178,#100179,#100180); +#100178 = CARTESIAN_POINT('',(6.74,-4.15,-0.457437037472)); +#100179 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100180 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100181 = PLANE('',#100182); +#100182 = AXIS2_PLACEMENT_3D('',#100183,#100184,#100185); +#100183 = CARTESIAN_POINT('',(6.45,-4.15,-0.5)); +#100184 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100185 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100186 = ADVANCED_FACE('',(#100187),#100331,.T.); +#100187 = FACE_BOUND('',#100188,.T.); +#100188 = EDGE_LOOP('',(#100189,#100199,#100208,#100216,#100225,#100233, + #100241,#100249,#100258,#100266,#100275,#100283,#100292,#100298, + #100299,#100307,#100316,#100324)); +#100189 = ORIENTED_EDGE('',*,*,#100190,.T.); +#100190 = EDGE_CURVE('',#100191,#100193,#100195,.T.); +#100191 = VERTEX_POINT('',#100192); +#100192 = CARTESIAN_POINT('',(6.462230377286,0.35,-0.540767924286)); +#100193 = VERTEX_POINT('',#100194); +#100194 = CARTESIAN_POINT('',(6.725000733956,0.35,-1.416669113186)); +#100195 = LINE('',#100196,#100197); +#100196 = CARTESIAN_POINT('',(6.45,0.35,-0.5)); +#100197 = VECTOR('',#100198,1.); +#100198 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100199 = ORIENTED_EDGE('',*,*,#100200,.T.); +#100200 = EDGE_CURVE('',#100193,#100201,#100203,.T.); +#100201 = VERTEX_POINT('',#100202); +#100202 = CARTESIAN_POINT('',(6.725000733956,0.35,-1.583330886814)); +#100203 = CIRCLE('',#100204,0.29); +#100204 = AXIS2_PLACEMENT_3D('',#100205,#100206,#100207); +#100205 = CARTESIAN_POINT('',(6.447231111242,0.35,-1.5)); +#100206 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100207 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100208 = ORIENTED_EDGE('',*,*,#100209,.T.); +#100209 = EDGE_CURVE('',#100201,#100210,#100212,.T.); +#100210 = VERTEX_POINT('',#100211); +#100211 = CARTESIAN_POINT('',(6.462230377286,0.35,-2.459232075714)); +#100212 = LINE('',#100213,#100214); +#100213 = CARTESIAN_POINT('',(6.75,0.35,-1.5)); +#100214 = VECTOR('',#100215,1.); +#100215 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100216 = ORIENTED_EDGE('',*,*,#100217,.F.); +#100217 = EDGE_CURVE('',#100218,#100210,#100220,.T.); +#100218 = VERTEX_POINT('',#100219); +#100219 = CARTESIAN_POINT('',(6.45,0.35,-2.542562962528)); +#100220 = CIRCLE('',#100221,0.29); +#100221 = AXIS2_PLACEMENT_3D('',#100222,#100223,#100224); +#100222 = CARTESIAN_POINT('',(6.74,0.35,-2.542562962528)); +#100223 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100224 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100225 = ORIENTED_EDGE('',*,*,#100226,.F.); +#100226 = EDGE_CURVE('',#100227,#100218,#100229,.T.); +#100227 = VERTEX_POINT('',#100228); +#100228 = CARTESIAN_POINT('',(6.45,0.35,-3.5)); +#100229 = LINE('',#100230,#100231); +#100230 = CARTESIAN_POINT('',(6.45,0.35,-3.5)); +#100231 = VECTOR('',#100232,1.); +#100232 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100233 = ORIENTED_EDGE('',*,*,#100234,.F.); +#100234 = EDGE_CURVE('',#100235,#100227,#100237,.T.); +#100235 = VERTEX_POINT('',#100236); +#100236 = CARTESIAN_POINT('',(6.15,0.35,-3.5)); +#100237 = LINE('',#100238,#100239); +#100238 = CARTESIAN_POINT('',(6.15,0.35,-3.5)); +#100239 = VECTOR('',#100240,1.); +#100240 = DIRECTION('',(1.,0.,0.)); +#100241 = ORIENTED_EDGE('',*,*,#100242,.F.); +#100242 = EDGE_CURVE('',#100243,#100235,#100245,.T.); +#100243 = VERTEX_POINT('',#100244); +#100244 = CARTESIAN_POINT('',(6.15,0.35,-2.542562962528)); +#100245 = LINE('',#100246,#100247); +#100246 = CARTESIAN_POINT('',(6.15,0.35,-2.5)); +#100247 = VECTOR('',#100248,1.); +#100248 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100249 = ORIENTED_EDGE('',*,*,#100250,.F.); +#100250 = EDGE_CURVE('',#100251,#100243,#100253,.T.); +#100251 = VERTEX_POINT('',#100252); +#100252 = CARTESIAN_POINT('',(6.162230377286,0.35,-2.459232075714)); +#100253 = CIRCLE('',#100254,0.29); +#100254 = AXIS2_PLACEMENT_3D('',#100255,#100256,#100257); +#100255 = CARTESIAN_POINT('',(6.44,0.35,-2.542562962528)); +#100256 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100257 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100258 = ORIENTED_EDGE('',*,*,#100259,.T.); +#100259 = EDGE_CURVE('',#100251,#100260,#100262,.T.); +#100260 = VERTEX_POINT('',#100261); +#100261 = CARTESIAN_POINT('',(6.425000733956,0.35,-1.583330886814)); +#100262 = LINE('',#100263,#100264); +#100263 = CARTESIAN_POINT('',(6.15,0.35,-2.5)); +#100264 = VECTOR('',#100265,1.); +#100265 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100266 = ORIENTED_EDGE('',*,*,#100267,.F.); +#100267 = EDGE_CURVE('',#100268,#100260,#100270,.T.); +#100268 = VERTEX_POINT('',#100269); +#100269 = CARTESIAN_POINT('',(6.425000733956,0.35,-1.416669113186)); +#100270 = CIRCLE('',#100271,0.29); +#100271 = AXIS2_PLACEMENT_3D('',#100272,#100273,#100274); +#100272 = CARTESIAN_POINT('',(6.147231111242,0.35,-1.5)); +#100273 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100274 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100275 = ORIENTED_EDGE('',*,*,#100276,.T.); +#100276 = EDGE_CURVE('',#100268,#100277,#100279,.T.); +#100277 = VERTEX_POINT('',#100278); +#100278 = CARTESIAN_POINT('',(6.162230377286,0.35,-0.540767924286)); +#100279 = LINE('',#100280,#100281); +#100280 = CARTESIAN_POINT('',(6.45,0.35,-1.5)); +#100281 = VECTOR('',#100282,1.); +#100282 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100283 = ORIENTED_EDGE('',*,*,#100284,.F.); +#100284 = EDGE_CURVE('',#100285,#100277,#100287,.T.); +#100285 = VERTEX_POINT('',#100286); +#100286 = CARTESIAN_POINT('',(6.15,0.35,-0.457437037472)); +#100287 = CIRCLE('',#100288,0.29); +#100288 = AXIS2_PLACEMENT_3D('',#100289,#100290,#100291); +#100289 = CARTESIAN_POINT('',(6.44,0.35,-0.457437037472)); +#100290 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100291 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100292 = ORIENTED_EDGE('',*,*,#100293,.F.); +#100293 = EDGE_CURVE('',#99006,#100285,#100294,.T.); +#100294 = LINE('',#100295,#100296); +#100295 = CARTESIAN_POINT('',(6.15,0.35,1.5)); +#100296 = VECTOR('',#100297,1.); +#100297 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100298 = ORIENTED_EDGE('',*,*,#99013,.F.); +#100299 = ORIENTED_EDGE('',*,*,#100300,.F.); +#100300 = EDGE_CURVE('',#100301,#99014,#100303,.T.); +#100301 = VERTEX_POINT('',#100302); +#100302 = CARTESIAN_POINT('',(6.16,0.35,1.5)); +#100303 = LINE('',#100304,#100305); +#100304 = CARTESIAN_POINT('',(6.45,0.35,1.5)); +#100305 = VECTOR('',#100306,1.); +#100306 = DIRECTION('',(-1.,-0.,0.)); +#100307 = ORIENTED_EDGE('',*,*,#100308,.F.); +#100308 = EDGE_CURVE('',#100309,#100301,#100311,.T.); +#100309 = VERTEX_POINT('',#100310); +#100310 = CARTESIAN_POINT('',(6.45,0.35,1.21)); +#100311 = CIRCLE('',#100312,0.29); +#100312 = AXIS2_PLACEMENT_3D('',#100313,#100314,#100315); +#100313 = CARTESIAN_POINT('',(6.16,0.35,1.21)); +#100314 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100315 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100316 = ORIENTED_EDGE('',*,*,#100317,.F.); +#100317 = EDGE_CURVE('',#100318,#100309,#100320,.T.); +#100318 = VERTEX_POINT('',#100319); +#100319 = CARTESIAN_POINT('',(6.45,0.35,-0.457437037472)); +#100320 = LINE('',#100321,#100322); +#100321 = CARTESIAN_POINT('',(6.45,0.35,-0.5)); +#100322 = VECTOR('',#100323,1.); +#100323 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100324 = ORIENTED_EDGE('',*,*,#100325,.F.); +#100325 = EDGE_CURVE('',#100191,#100318,#100326,.T.); +#100326 = CIRCLE('',#100327,0.29); +#100327 = AXIS2_PLACEMENT_3D('',#100328,#100329,#100330); +#100328 = CARTESIAN_POINT('',(6.74,0.35,-0.457437037472)); +#100329 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100330 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100331 = PLANE('',#100332); +#100332 = AXIS2_PLACEMENT_3D('',#100333,#100334,#100335); +#100333 = CARTESIAN_POINT('',(6.45,0.35,-0.5)); +#100334 = DIRECTION('',(1.64346021921E-31,1.,5.551115123126E-16)); +#100335 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100336 = ADVANCED_FACE('',(#100337),#100481,.F.); +#100337 = FACE_BOUND('',#100338,.F.); +#100338 = EDGE_LOOP('',(#100339,#100349,#100358,#100366,#100375,#100383, + #100391,#100399,#100408,#100416,#100425,#100433,#100442,#100448, + #100449,#100457,#100466,#100474)); +#100339 = ORIENTED_EDGE('',*,*,#100340,.T.); +#100340 = EDGE_CURVE('',#100341,#100343,#100345,.T.); +#100341 = VERTEX_POINT('',#100342); +#100342 = CARTESIAN_POINT('',(6.462230377286,-0.35,-0.540767924286)); +#100343 = VERTEX_POINT('',#100344); +#100344 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.416669113186)); +#100345 = LINE('',#100346,#100347); +#100346 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#100347 = VECTOR('',#100348,1.); +#100348 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100349 = ORIENTED_EDGE('',*,*,#100350,.T.); +#100350 = EDGE_CURVE('',#100343,#100351,#100353,.T.); +#100351 = VERTEX_POINT('',#100352); +#100352 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.583330886814)); +#100353 = CIRCLE('',#100354,0.29); +#100354 = AXIS2_PLACEMENT_3D('',#100355,#100356,#100357); +#100355 = CARTESIAN_POINT('',(6.447231111242,-0.35,-1.5)); +#100356 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100357 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100358 = ORIENTED_EDGE('',*,*,#100359,.T.); +#100359 = EDGE_CURVE('',#100351,#100360,#100362,.T.); +#100360 = VERTEX_POINT('',#100361); +#100361 = CARTESIAN_POINT('',(6.462230377286,-0.35,-2.459232075714)); +#100362 = LINE('',#100363,#100364); +#100363 = CARTESIAN_POINT('',(6.75,-0.35,-1.5)); +#100364 = VECTOR('',#100365,1.); +#100365 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100366 = ORIENTED_EDGE('',*,*,#100367,.F.); +#100367 = EDGE_CURVE('',#100368,#100360,#100370,.T.); +#100368 = VERTEX_POINT('',#100369); +#100369 = CARTESIAN_POINT('',(6.45,-0.35,-2.542562962528)); +#100370 = CIRCLE('',#100371,0.29); +#100371 = AXIS2_PLACEMENT_3D('',#100372,#100373,#100374); +#100372 = CARTESIAN_POINT('',(6.74,-0.35,-2.542562962528)); +#100373 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100374 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100375 = ORIENTED_EDGE('',*,*,#100376,.F.); +#100376 = EDGE_CURVE('',#100377,#100368,#100379,.T.); +#100377 = VERTEX_POINT('',#100378); +#100378 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#100379 = LINE('',#100380,#100381); +#100380 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#100381 = VECTOR('',#100382,1.); +#100382 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100383 = ORIENTED_EDGE('',*,*,#100384,.F.); +#100384 = EDGE_CURVE('',#100385,#100377,#100387,.T.); +#100385 = VERTEX_POINT('',#100386); +#100386 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#100387 = LINE('',#100388,#100389); +#100388 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#100389 = VECTOR('',#100390,1.); +#100390 = DIRECTION('',(1.,0.,0.)); +#100391 = ORIENTED_EDGE('',*,*,#100392,.F.); +#100392 = EDGE_CURVE('',#100393,#100385,#100395,.T.); +#100393 = VERTEX_POINT('',#100394); +#100394 = CARTESIAN_POINT('',(6.15,-0.35,-2.542562962528)); +#100395 = LINE('',#100396,#100397); +#100396 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#100397 = VECTOR('',#100398,1.); +#100398 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100399 = ORIENTED_EDGE('',*,*,#100400,.F.); +#100400 = EDGE_CURVE('',#100401,#100393,#100403,.T.); +#100401 = VERTEX_POINT('',#100402); +#100402 = CARTESIAN_POINT('',(6.162230377286,-0.35,-2.459232075714)); +#100403 = CIRCLE('',#100404,0.29); +#100404 = AXIS2_PLACEMENT_3D('',#100405,#100406,#100407); +#100405 = CARTESIAN_POINT('',(6.44,-0.35,-2.542562962528)); +#100406 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100407 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100408 = ORIENTED_EDGE('',*,*,#100409,.T.); +#100409 = EDGE_CURVE('',#100401,#100410,#100412,.T.); +#100410 = VERTEX_POINT('',#100411); +#100411 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.583330886814)); +#100412 = LINE('',#100413,#100414); +#100413 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#100414 = VECTOR('',#100415,1.); +#100415 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100416 = ORIENTED_EDGE('',*,*,#100417,.F.); +#100417 = EDGE_CURVE('',#100418,#100410,#100420,.T.); +#100418 = VERTEX_POINT('',#100419); +#100419 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.416669113186)); +#100420 = CIRCLE('',#100421,0.29); +#100421 = AXIS2_PLACEMENT_3D('',#100422,#100423,#100424); +#100422 = CARTESIAN_POINT('',(6.147231111242,-0.35,-1.5)); +#100423 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100424 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100425 = ORIENTED_EDGE('',*,*,#100426,.T.); +#100426 = EDGE_CURVE('',#100418,#100427,#100429,.T.); +#100427 = VERTEX_POINT('',#100428); +#100428 = CARTESIAN_POINT('',(6.162230377286,-0.35,-0.540767924286)); +#100429 = LINE('',#100430,#100431); +#100430 = CARTESIAN_POINT('',(6.45,-0.35,-1.5)); +#100431 = VECTOR('',#100432,1.); +#100432 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100433 = ORIENTED_EDGE('',*,*,#100434,.F.); +#100434 = EDGE_CURVE('',#100435,#100427,#100437,.T.); +#100435 = VERTEX_POINT('',#100436); +#100436 = CARTESIAN_POINT('',(6.15,-0.35,-0.457437037472)); +#100437 = CIRCLE('',#100438,0.29); +#100438 = AXIS2_PLACEMENT_3D('',#100439,#100440,#100441); +#100439 = CARTESIAN_POINT('',(6.44,-0.35,-0.457437037472)); +#100440 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100441 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100442 = ORIENTED_EDGE('',*,*,#100443,.F.); +#100443 = EDGE_CURVE('',#99030,#100435,#100444,.T.); +#100444 = LINE('',#100445,#100446); +#100445 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#100446 = VECTOR('',#100447,1.); +#100447 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100448 = ORIENTED_EDGE('',*,*,#99029,.F.); +#100449 = ORIENTED_EDGE('',*,*,#100450,.F.); +#100450 = EDGE_CURVE('',#100451,#99022,#100453,.T.); +#100451 = VERTEX_POINT('',#100452); +#100452 = CARTESIAN_POINT('',(6.16,-0.35,1.5)); +#100453 = LINE('',#100454,#100455); +#100454 = CARTESIAN_POINT('',(6.45,-0.35,1.5)); +#100455 = VECTOR('',#100456,1.); +#100456 = DIRECTION('',(-1.,-0.,0.)); +#100457 = ORIENTED_EDGE('',*,*,#100458,.F.); +#100458 = EDGE_CURVE('',#100459,#100451,#100461,.T.); +#100459 = VERTEX_POINT('',#100460); +#100460 = CARTESIAN_POINT('',(6.45,-0.35,1.21)); +#100461 = CIRCLE('',#100462,0.29); +#100462 = AXIS2_PLACEMENT_3D('',#100463,#100464,#100465); +#100463 = CARTESIAN_POINT('',(6.16,-0.35,1.21)); +#100464 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100465 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100466 = ORIENTED_EDGE('',*,*,#100467,.F.); +#100467 = EDGE_CURVE('',#100468,#100459,#100470,.T.); +#100468 = VERTEX_POINT('',#100469); +#100469 = CARTESIAN_POINT('',(6.45,-0.35,-0.457437037472)); +#100470 = LINE('',#100471,#100472); +#100471 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#100472 = VECTOR('',#100473,1.); +#100473 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100474 = ORIENTED_EDGE('',*,*,#100475,.F.); +#100475 = EDGE_CURVE('',#100341,#100468,#100476,.T.); +#100476 = CIRCLE('',#100477,0.29); +#100477 = AXIS2_PLACEMENT_3D('',#100478,#100479,#100480); +#100478 = CARTESIAN_POINT('',(6.74,-0.35,-0.457437037472)); +#100479 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100480 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100481 = PLANE('',#100482); +#100482 = AXIS2_PLACEMENT_3D('',#100483,#100484,#100485); +#100483 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#100484 = DIRECTION('',(1.64346021921E-31,1.,5.551115123126E-16)); +#100485 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100486 = ADVANCED_FACE('',(#100487),#100498,.T.); +#100487 = FACE_BOUND('',#100488,.T.); +#100488 = EDGE_LOOP('',(#100489,#100490,#100496,#100497)); +#100489 = ORIENTED_EDGE('',*,*,#100450,.F.); +#100490 = ORIENTED_EDGE('',*,*,#100491,.T.); +#100491 = EDGE_CURVE('',#100451,#100301,#100492,.T.); +#100492 = LINE('',#100493,#100494); +#100493 = CARTESIAN_POINT('',(6.16,-0.35,1.5)); +#100494 = VECTOR('',#100495,1.); +#100495 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100496 = ORIENTED_EDGE('',*,*,#100300,.T.); +#100497 = ORIENTED_EDGE('',*,*,#99021,.F.); +#100498 = PLANE('',#100499); +#100499 = AXIS2_PLACEMENT_3D('',#100500,#100501,#100502); +#100500 = CARTESIAN_POINT('',(6.45,-0.35,1.5)); +#100501 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100502 = DIRECTION('',(-1.,0.,0.)); +#100503 = ADVANCED_FACE('',(#100504),#100507,.F.); +#100504 = FACE_BOUND('',#100505,.F.); +#100505 = EDGE_LOOP('',(#100506)); +#100506 = ORIENTED_EDGE('',*,*,#99161,.F.); +#100507 = PLANE('',#100508); +#100508 = AXIS2_PLACEMENT_3D('',#100509,#100510,#100511); +#100509 = CARTESIAN_POINT('',(4.9,-2.25,4.3)); +#100510 = DIRECTION('',(0.,0.,-1.)); +#100511 = DIRECTION('',(-1.,0.,0.)); +#100512 = ADVANCED_FACE('',(#100513),#100524,.F.); +#100513 = FACE_BOUND('',#100514,.F.); +#100514 = EDGE_LOOP('',(#100515,#100516,#100517,#100518)); +#100515 = ORIENTED_EDGE('',*,*,#99659,.F.); +#100516 = ORIENTED_EDGE('',*,*,#99198,.F.); +#100517 = ORIENTED_EDGE('',*,*,#99809,.T.); +#100518 = ORIENTED_EDGE('',*,*,#100519,.F.); +#100519 = EDGE_CURVE('',#99651,#99801,#100520,.T.); +#100520 = LINE('',#100521,#100522); +#100521 = CARTESIAN_POINT('',(0.15,-4.85,-0.457437037472)); +#100522 = VECTOR('',#100523,1.); +#100523 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100524 = PLANE('',#100525); +#100525 = AXIS2_PLACEMENT_3D('',#100526,#100527,#100528); +#100526 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#100527 = DIRECTION('',(-1.,0.,-0.)); +#100528 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100529 = ADVANCED_FACE('',(#100530),#100541,.T.); +#100530 = FACE_BOUND('',#100531,.T.); +#100531 = EDGE_LOOP('',(#100532,#100533,#100534,#100535)); +#100532 = ORIENTED_EDGE('',*,*,#99976,.F.); +#100533 = ORIENTED_EDGE('',*,*,#99223,.T.); +#100534 = ORIENTED_EDGE('',*,*,#100150,.T.); +#100535 = ORIENTED_EDGE('',*,*,#100536,.F.); +#100536 = EDGE_CURVE('',#99968,#100142,#100537,.T.); +#100537 = LINE('',#100538,#100539); +#100538 = CARTESIAN_POINT('',(6.15,-4.85,-0.457437037472)); +#100539 = VECTOR('',#100540,1.); +#100540 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100541 = PLANE('',#100542); +#100542 = AXIS2_PLACEMENT_3D('',#100543,#100544,#100545); +#100543 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#100544 = DIRECTION('',(-1.,0.,-0.)); +#100545 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100546 = ADVANCED_FACE('',(#100547),#100558,.F.); +#100547 = FACE_BOUND('',#100548,.F.); +#100548 = EDGE_LOOP('',(#100549,#100550,#100551,#100552)); +#100549 = ORIENTED_EDGE('',*,*,#99516,.F.); +#100550 = ORIENTED_EDGE('',*,*,#99205,.F.); +#100551 = ORIENTED_EDGE('',*,*,#99342,.T.); +#100552 = ORIENTED_EDGE('',*,*,#100553,.F.); +#100553 = EDGE_CURVE('',#99508,#99334,#100554,.T.); +#100554 = LINE('',#100555,#100556); +#100555 = CARTESIAN_POINT('',(0.15,-0.35,-0.457437037472)); +#100556 = VECTOR('',#100557,1.); +#100557 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100558 = PLANE('',#100559); +#100559 = AXIS2_PLACEMENT_3D('',#100560,#100561,#100562); +#100560 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#100561 = DIRECTION('',(-1.,0.,-0.)); +#100562 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100563 = ADVANCED_FACE('',(#100564),#100575,.T.); +#100564 = FACE_BOUND('',#100565,.T.); +#100565 = EDGE_LOOP('',(#100566,#100567,#100568,#100569)); +#100566 = ORIENTED_EDGE('',*,*,#100443,.F.); +#100567 = ORIENTED_EDGE('',*,*,#99216,.T.); +#100568 = ORIENTED_EDGE('',*,*,#100293,.T.); +#100569 = ORIENTED_EDGE('',*,*,#100570,.F.); +#100570 = EDGE_CURVE('',#100435,#100285,#100571,.T.); +#100571 = LINE('',#100572,#100573); +#100572 = CARTESIAN_POINT('',(6.15,-0.35,-0.457437037472)); +#100573 = VECTOR('',#100574,1.); +#100574 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100575 = PLANE('',#100576); +#100576 = AXIS2_PLACEMENT_3D('',#100577,#100578,#100579); +#100577 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#100578 = DIRECTION('',(-1.,0.,-0.)); +#100579 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100580 = ADVANCED_FACE('',(#100581),#100597,.T.); +#100581 = FACE_BOUND('',#100582,.T.); +#100582 = EDGE_LOOP('',(#100583,#100584,#100590,#100591)); +#100583 = ORIENTED_EDGE('',*,*,#99413,.F.); +#100584 = ORIENTED_EDGE('',*,*,#100585,.T.); +#100585 = EDGE_CURVE('',#99414,#99240,#100586,.T.); +#100586 = LINE('',#100587,#100588); +#100587 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-0.540767924286)); +#100588 = VECTOR('',#100589,1.); +#100589 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100590 = ORIENTED_EDGE('',*,*,#99239,.T.); +#100591 = ORIENTED_EDGE('',*,*,#100592,.F.); +#100592 = EDGE_CURVE('',#99416,#99242,#100593,.T.); +#100593 = LINE('',#100594,#100595); +#100594 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.416669113186)); +#100595 = VECTOR('',#100596,1.); +#100596 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100597 = PLANE('',#100598); +#100598 = AXIS2_PLACEMENT_3D('',#100599,#100600,#100601); +#100599 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#100600 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#100601 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100602 = ADVANCED_FACE('',(#100603),#100614,.F.); +#100603 = FACE_BOUND('',#100604,.F.); +#100604 = EDGE_LOOP('',(#100605,#100606,#100607,#100613)); +#100605 = ORIENTED_EDGE('',*,*,#100585,.T.); +#100606 = ORIENTED_EDGE('',*,*,#99374,.T.); +#100607 = ORIENTED_EDGE('',*,*,#100608,.F.); +#100608 = EDGE_CURVE('',#99534,#99367,#100609,.T.); +#100609 = LINE('',#100610,#100611); +#100610 = CARTESIAN_POINT('',(-0.15,-0.35,-0.457437037472)); +#100611 = VECTOR('',#100612,1.); +#100612 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100613 = ORIENTED_EDGE('',*,*,#99541,.F.); +#100614 = CYLINDRICAL_SURFACE('',#100615,0.29); +#100615 = AXIS2_PLACEMENT_3D('',#100616,#100617,#100618); +#100616 = CARTESIAN_POINT('',(-0.44,-0.35,-0.457437037472)); +#100617 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100618 = DIRECTION('',(0.957826285221,9.570607158983E-17, + -0.287347885566)); +#100619 = ADVANCED_FACE('',(#100620),#100631,.T.); +#100620 = FACE_BOUND('',#100621,.T.); +#100621 = EDGE_LOOP('',(#100622,#100623,#100624,#100630)); +#100622 = ORIENTED_EDGE('',*,*,#100592,.T.); +#100623 = ORIENTED_EDGE('',*,*,#99249,.T.); +#100624 = ORIENTED_EDGE('',*,*,#100625,.F.); +#100625 = EDGE_CURVE('',#99424,#99250,#100626,.T.); +#100626 = LINE('',#100627,#100628); +#100627 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.583330886814)); +#100628 = VECTOR('',#100629,1.); +#100629 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100630 = ORIENTED_EDGE('',*,*,#99423,.F.); +#100631 = CYLINDRICAL_SURFACE('',#100632,0.29); +#100632 = AXIS2_PLACEMENT_3D('',#100633,#100634,#100635); +#100633 = CARTESIAN_POINT('',(-0.147231111242,-0.35,-1.5)); +#100634 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100635 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100636 = ADVANCED_FACE('',(#100637),#100648,.F.); +#100637 = FACE_BOUND('',#100638,.F.); +#100638 = EDGE_LOOP('',(#100639,#100640,#100641,#100642)); +#100639 = ORIENTED_EDGE('',*,*,#99533,.F.); +#100640 = ORIENTED_EDGE('',*,*,#100608,.T.); +#100641 = ORIENTED_EDGE('',*,*,#99366,.T.); +#100642 = ORIENTED_EDGE('',*,*,#100643,.F.); +#100643 = EDGE_CURVE('',#99525,#99358,#100644,.T.); +#100644 = LINE('',#100645,#100646); +#100645 = CARTESIAN_POINT('',(-0.15,-0.35,1.21)); +#100646 = VECTOR('',#100647,1.); +#100647 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100648 = PLANE('',#100649); +#100649 = AXIS2_PLACEMENT_3D('',#100650,#100651,#100652); +#100650 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#100651 = DIRECTION('',(1.,0.,0.)); +#100652 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100653 = ADVANCED_FACE('',(#100654),#100665,.T.); +#100654 = FACE_BOUND('',#100655,.T.); +#100655 = EDGE_LOOP('',(#100656,#100657,#100658,#100659)); +#100656 = ORIENTED_EDGE('',*,*,#99432,.F.); +#100657 = ORIENTED_EDGE('',*,*,#100625,.T.); +#100658 = ORIENTED_EDGE('',*,*,#99258,.T.); +#100659 = ORIENTED_EDGE('',*,*,#100660,.F.); +#100660 = EDGE_CURVE('',#99433,#99259,#100661,.T.); +#100661 = LINE('',#100662,#100663); +#100662 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-2.459232075714)); +#100663 = VECTOR('',#100664,1.); +#100664 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100665 = PLANE('',#100666); +#100666 = AXIS2_PLACEMENT_3D('',#100667,#100668,#100669); +#100667 = CARTESIAN_POINT('',(-0.45,-0.35,-1.5)); +#100668 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#100669 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100670 = ADVANCED_FACE('',(#100671),#100677,.T.); +#100671 = FACE_BOUND('',#100672,.T.); +#100672 = EDGE_LOOP('',(#100673,#100674,#100675,#100676)); +#100673 = ORIENTED_EDGE('',*,*,#99524,.T.); +#100674 = ORIENTED_EDGE('',*,*,#99397,.T.); +#100675 = ORIENTED_EDGE('',*,*,#99357,.F.); +#100676 = ORIENTED_EDGE('',*,*,#100643,.F.); +#100677 = CYLINDRICAL_SURFACE('',#100678,0.29); +#100678 = AXIS2_PLACEMENT_3D('',#100679,#100680,#100681); +#100679 = CARTESIAN_POINT('',(0.14,-0.35,1.21)); +#100680 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100681 = DIRECTION('',(-1.,0.,0.)); +#100682 = ADVANCED_FACE('',(#100683),#100694,.F.); +#100683 = FACE_BOUND('',#100684,.F.); +#100684 = EDGE_LOOP('',(#100685,#100691,#100692,#100693)); +#100685 = ORIENTED_EDGE('',*,*,#100686,.T.); +#100686 = EDGE_CURVE('',#99441,#99267,#100687,.T.); +#100687 = LINE('',#100688,#100689); +#100688 = CARTESIAN_POINT('',(-0.15,-0.35,-2.542562962528)); +#100689 = VECTOR('',#100690,1.); +#100690 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100691 = ORIENTED_EDGE('',*,*,#99266,.T.); +#100692 = ORIENTED_EDGE('',*,*,#100660,.F.); +#100693 = ORIENTED_EDGE('',*,*,#99440,.F.); +#100694 = CYLINDRICAL_SURFACE('',#100695,0.29); +#100695 = AXIS2_PLACEMENT_3D('',#100696,#100697,#100698); +#100696 = CARTESIAN_POINT('',(-0.44,-0.35,-2.542562962528)); +#100697 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100698 = DIRECTION('',(1.,0.,-0.)); +#100699 = ADVANCED_FACE('',(#100700),#100711,.F.); +#100700 = FACE_BOUND('',#100701,.F.); +#100701 = EDGE_LOOP('',(#100702,#100703,#100709,#100710)); +#100702 = ORIENTED_EDGE('',*,*,#99449,.F.); +#100703 = ORIENTED_EDGE('',*,*,#100704,.T.); +#100704 = EDGE_CURVE('',#99450,#99276,#100705,.T.); +#100705 = LINE('',#100706,#100707); +#100706 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#100707 = VECTOR('',#100708,1.); +#100708 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100709 = ORIENTED_EDGE('',*,*,#99275,.T.); +#100710 = ORIENTED_EDGE('',*,*,#100686,.F.); +#100711 = PLANE('',#100712); +#100712 = AXIS2_PLACEMENT_3D('',#100713,#100714,#100715); +#100713 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#100714 = DIRECTION('',(1.,0.,0.)); +#100715 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100716 = ADVANCED_FACE('',(#100717),#100728,.F.); +#100717 = FACE_BOUND('',#100718,.F.); +#100718 = EDGE_LOOP('',(#100719,#100725,#100726,#100727)); +#100719 = ORIENTED_EDGE('',*,*,#100720,.T.); +#100720 = EDGE_CURVE('',#99458,#99284,#100721,.T.); +#100721 = LINE('',#100722,#100723); +#100722 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#100723 = VECTOR('',#100724,1.); +#100724 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100725 = ORIENTED_EDGE('',*,*,#99283,.T.); +#100726 = ORIENTED_EDGE('',*,*,#100704,.F.); +#100727 = ORIENTED_EDGE('',*,*,#99457,.F.); +#100728 = PLANE('',#100729); +#100729 = AXIS2_PLACEMENT_3D('',#100730,#100731,#100732); +#100730 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#100731 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100732 = DIRECTION('',(-1.,0.,0.)); +#100733 = ADVANCED_FACE('',(#100734),#100745,.F.); +#100734 = FACE_BOUND('',#100735,.F.); +#100735 = EDGE_LOOP('',(#100736,#100737,#100743,#100744)); +#100736 = ORIENTED_EDGE('',*,*,#99465,.F.); +#100737 = ORIENTED_EDGE('',*,*,#100738,.T.); +#100738 = EDGE_CURVE('',#99466,#99292,#100739,.T.); +#100739 = LINE('',#100740,#100741); +#100740 = CARTESIAN_POINT('',(0.15,-0.35,-2.542562962528)); +#100741 = VECTOR('',#100742,1.); +#100742 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100743 = ORIENTED_EDGE('',*,*,#99291,.T.); +#100744 = ORIENTED_EDGE('',*,*,#100720,.F.); +#100745 = PLANE('',#100746); +#100746 = AXIS2_PLACEMENT_3D('',#100747,#100748,#100749); +#100747 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#100748 = DIRECTION('',(-1.,0.,-0.)); +#100749 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100750 = ADVANCED_FACE('',(#100751),#100762,.T.); +#100751 = FACE_BOUND('',#100752,.T.); +#100752 = EDGE_LOOP('',(#100753,#100754,#100760,#100761)); +#100753 = ORIENTED_EDGE('',*,*,#99507,.T.); +#100754 = ORIENTED_EDGE('',*,*,#100755,.T.); +#100755 = EDGE_CURVE('',#99500,#99326,#100756,.T.); +#100756 = LINE('',#100757,#100758); +#100757 = CARTESIAN_POINT('',(0.137769622714,-0.35,-0.540767924286)); +#100758 = VECTOR('',#100759,1.); +#100759 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100760 = ORIENTED_EDGE('',*,*,#99333,.F.); +#100761 = ORIENTED_EDGE('',*,*,#100553,.F.); +#100762 = CYLINDRICAL_SURFACE('',#100763,0.29); +#100763 = AXIS2_PLACEMENT_3D('',#100764,#100765,#100766); +#100764 = CARTESIAN_POINT('',(-0.14,-0.35,-0.457437037472)); +#100765 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100766 = DIRECTION('',(1.,0.,-0.)); +#100767 = ADVANCED_FACE('',(#100768),#100779,.T.); +#100768 = FACE_BOUND('',#100769,.T.); +#100769 = EDGE_LOOP('',(#100770,#100771,#100772,#100773)); +#100770 = ORIENTED_EDGE('',*,*,#99473,.T.); +#100771 = ORIENTED_EDGE('',*,*,#100738,.T.); +#100772 = ORIENTED_EDGE('',*,*,#99299,.F.); +#100773 = ORIENTED_EDGE('',*,*,#100774,.F.); +#100774 = EDGE_CURVE('',#99474,#99300,#100775,.T.); +#100775 = LINE('',#100776,#100777); +#100776 = CARTESIAN_POINT('',(0.137769622714,-0.35,-2.459232075714)); +#100777 = VECTOR('',#100778,1.); +#100778 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100779 = CYLINDRICAL_SURFACE('',#100780,0.29); +#100780 = AXIS2_PLACEMENT_3D('',#100781,#100782,#100783); +#100781 = CARTESIAN_POINT('',(-0.14,-0.35,-2.542562962528)); +#100782 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100783 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100784 = ADVANCED_FACE('',(#100785),#100796,.T.); +#100785 = FACE_BOUND('',#100786,.T.); +#100786 = EDGE_LOOP('',(#100787,#100788,#100794,#100795)); +#100787 = ORIENTED_EDGE('',*,*,#99499,.F.); +#100788 = ORIENTED_EDGE('',*,*,#100789,.T.); +#100789 = EDGE_CURVE('',#99491,#99317,#100790,.T.); +#100790 = LINE('',#100791,#100792); +#100791 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.416669113186)); +#100792 = VECTOR('',#100793,1.); +#100793 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100794 = ORIENTED_EDGE('',*,*,#99325,.T.); +#100795 = ORIENTED_EDGE('',*,*,#100755,.F.); +#100796 = PLANE('',#100797); +#100797 = AXIS2_PLACEMENT_3D('',#100798,#100799,#100800); +#100798 = CARTESIAN_POINT('',(-0.15,-0.35,-1.5)); +#100799 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#100800 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100801 = ADVANCED_FACE('',(#100802),#100813,.T.); +#100802 = FACE_BOUND('',#100803,.T.); +#100803 = EDGE_LOOP('',(#100804,#100805,#100806,#100807)); +#100804 = ORIENTED_EDGE('',*,*,#99482,.F.); +#100805 = ORIENTED_EDGE('',*,*,#100774,.T.); +#100806 = ORIENTED_EDGE('',*,*,#99308,.T.); +#100807 = ORIENTED_EDGE('',*,*,#100808,.F.); +#100808 = EDGE_CURVE('',#99483,#99309,#100809,.T.); +#100809 = LINE('',#100810,#100811); +#100810 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.583330886814)); +#100811 = VECTOR('',#100812,1.); +#100812 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100813 = PLANE('',#100814); +#100814 = AXIS2_PLACEMENT_3D('',#100815,#100816,#100817); +#100815 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#100816 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#100817 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100818 = ADVANCED_FACE('',(#100819),#100825,.F.); +#100819 = FACE_BOUND('',#100820,.F.); +#100820 = EDGE_LOOP('',(#100821,#100822,#100823,#100824)); +#100821 = ORIENTED_EDGE('',*,*,#100789,.T.); +#100822 = ORIENTED_EDGE('',*,*,#99316,.T.); +#100823 = ORIENTED_EDGE('',*,*,#100808,.F.); +#100824 = ORIENTED_EDGE('',*,*,#99490,.F.); +#100825 = CYLINDRICAL_SURFACE('',#100826,0.29); +#100826 = AXIS2_PLACEMENT_3D('',#100827,#100828,#100829); +#100827 = CARTESIAN_POINT('',(0.152768888758,-0.35,-1.5)); +#100828 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100829 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100830 = ADVANCED_FACE('',(#100831),#100847,.T.); +#100831 = FACE_BOUND('',#100832,.T.); +#100832 = EDGE_LOOP('',(#100833,#100834,#100840,#100841)); +#100833 = ORIENTED_EDGE('',*,*,#99556,.F.); +#100834 = ORIENTED_EDGE('',*,*,#100835,.T.); +#100835 = EDGE_CURVE('',#99557,#99707,#100836,.T.); +#100836 = LINE('',#100837,#100838); +#100837 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-0.540767924286)); +#100838 = VECTOR('',#100839,1.); +#100839 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100840 = ORIENTED_EDGE('',*,*,#99706,.T.); +#100841 = ORIENTED_EDGE('',*,*,#100842,.F.); +#100842 = EDGE_CURVE('',#99559,#99709,#100843,.T.); +#100843 = LINE('',#100844,#100845); +#100844 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.416669113186)); +#100845 = VECTOR('',#100846,1.); +#100846 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100847 = PLANE('',#100848); +#100848 = AXIS2_PLACEMENT_3D('',#100849,#100850,#100851); +#100849 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#100850 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#100851 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100852 = ADVANCED_FACE('',(#100853),#100864,.F.); +#100853 = FACE_BOUND('',#100854,.F.); +#100854 = EDGE_LOOP('',(#100855,#100856,#100857,#100863)); +#100855 = ORIENTED_EDGE('',*,*,#100835,.T.); +#100856 = ORIENTED_EDGE('',*,*,#99841,.T.); +#100857 = ORIENTED_EDGE('',*,*,#100858,.F.); +#100858 = EDGE_CURVE('',#99684,#99834,#100859,.T.); +#100859 = LINE('',#100860,#100861); +#100860 = CARTESIAN_POINT('',(-0.15,-4.85,-0.457437037472)); +#100861 = VECTOR('',#100862,1.); +#100862 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100863 = ORIENTED_EDGE('',*,*,#99691,.F.); +#100864 = CYLINDRICAL_SURFACE('',#100865,0.29); +#100865 = AXIS2_PLACEMENT_3D('',#100866,#100867,#100868); +#100866 = CARTESIAN_POINT('',(-0.44,-4.85,-0.457437037472)); +#100867 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100868 = DIRECTION('',(0.957826285221,9.570607158983E-17, + -0.287347885566)); +#100869 = ADVANCED_FACE('',(#100870),#100881,.T.); +#100870 = FACE_BOUND('',#100871,.T.); +#100871 = EDGE_LOOP('',(#100872,#100873,#100874,#100880)); +#100872 = ORIENTED_EDGE('',*,*,#100842,.T.); +#100873 = ORIENTED_EDGE('',*,*,#99716,.T.); +#100874 = ORIENTED_EDGE('',*,*,#100875,.F.); +#100875 = EDGE_CURVE('',#99567,#99717,#100876,.T.); +#100876 = LINE('',#100877,#100878); +#100877 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.583330886814)); +#100878 = VECTOR('',#100879,1.); +#100879 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100880 = ORIENTED_EDGE('',*,*,#99566,.F.); +#100881 = CYLINDRICAL_SURFACE('',#100882,0.29); +#100882 = AXIS2_PLACEMENT_3D('',#100883,#100884,#100885); +#100883 = CARTESIAN_POINT('',(-0.147231111242,-4.85,-1.5)); +#100884 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100885 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100886 = ADVANCED_FACE('',(#100887),#100898,.F.); +#100887 = FACE_BOUND('',#100888,.F.); +#100888 = EDGE_LOOP('',(#100889,#100890,#100891,#100892)); +#100889 = ORIENTED_EDGE('',*,*,#99683,.F.); +#100890 = ORIENTED_EDGE('',*,*,#100858,.T.); +#100891 = ORIENTED_EDGE('',*,*,#99833,.T.); +#100892 = ORIENTED_EDGE('',*,*,#100893,.F.); +#100893 = EDGE_CURVE('',#99675,#99825,#100894,.T.); +#100894 = LINE('',#100895,#100896); +#100895 = CARTESIAN_POINT('',(-0.15,-4.85,1.21)); +#100896 = VECTOR('',#100897,1.); +#100897 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100898 = PLANE('',#100899); +#100899 = AXIS2_PLACEMENT_3D('',#100900,#100901,#100902); +#100900 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#100901 = DIRECTION('',(1.,0.,0.)); +#100902 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100903 = ADVANCED_FACE('',(#100904),#100915,.T.); +#100904 = FACE_BOUND('',#100905,.T.); +#100905 = EDGE_LOOP('',(#100906,#100907,#100908,#100909)); +#100906 = ORIENTED_EDGE('',*,*,#99575,.F.); +#100907 = ORIENTED_EDGE('',*,*,#100875,.T.); +#100908 = ORIENTED_EDGE('',*,*,#99725,.T.); +#100909 = ORIENTED_EDGE('',*,*,#100910,.F.); +#100910 = EDGE_CURVE('',#99576,#99726,#100911,.T.); +#100911 = LINE('',#100912,#100913); +#100912 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-2.459232075714)); +#100913 = VECTOR('',#100914,1.); +#100914 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100915 = PLANE('',#100916); +#100916 = AXIS2_PLACEMENT_3D('',#100917,#100918,#100919); +#100917 = CARTESIAN_POINT('',(-0.45,-4.85,-1.5)); +#100918 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#100919 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100920 = ADVANCED_FACE('',(#100921),#100927,.T.); +#100921 = FACE_BOUND('',#100922,.T.); +#100922 = EDGE_LOOP('',(#100923,#100924,#100925,#100926)); +#100923 = ORIENTED_EDGE('',*,*,#99674,.T.); +#100924 = ORIENTED_EDGE('',*,*,#99857,.T.); +#100925 = ORIENTED_EDGE('',*,*,#99824,.F.); +#100926 = ORIENTED_EDGE('',*,*,#100893,.F.); +#100927 = CYLINDRICAL_SURFACE('',#100928,0.29); +#100928 = AXIS2_PLACEMENT_3D('',#100929,#100930,#100931); +#100929 = CARTESIAN_POINT('',(0.14,-4.85,1.21)); +#100930 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100931 = DIRECTION('',(-1.,0.,0.)); +#100932 = ADVANCED_FACE('',(#100933),#100944,.F.); +#100933 = FACE_BOUND('',#100934,.F.); +#100934 = EDGE_LOOP('',(#100935,#100941,#100942,#100943)); +#100935 = ORIENTED_EDGE('',*,*,#100936,.T.); +#100936 = EDGE_CURVE('',#99584,#99734,#100937,.T.); +#100937 = LINE('',#100938,#100939); +#100938 = CARTESIAN_POINT('',(-0.15,-4.85,-2.542562962528)); +#100939 = VECTOR('',#100940,1.); +#100940 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100941 = ORIENTED_EDGE('',*,*,#99733,.T.); +#100942 = ORIENTED_EDGE('',*,*,#100910,.F.); +#100943 = ORIENTED_EDGE('',*,*,#99583,.F.); +#100944 = CYLINDRICAL_SURFACE('',#100945,0.29); +#100945 = AXIS2_PLACEMENT_3D('',#100946,#100947,#100948); +#100946 = CARTESIAN_POINT('',(-0.44,-4.85,-2.542562962528)); +#100947 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100948 = DIRECTION('',(1.,0.,-0.)); +#100949 = ADVANCED_FACE('',(#100950),#100961,.F.); +#100950 = FACE_BOUND('',#100951,.F.); +#100951 = EDGE_LOOP('',(#100952,#100953,#100959,#100960)); +#100952 = ORIENTED_EDGE('',*,*,#99592,.F.); +#100953 = ORIENTED_EDGE('',*,*,#100954,.T.); +#100954 = EDGE_CURVE('',#99593,#99743,#100955,.T.); +#100955 = LINE('',#100956,#100957); +#100956 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#100957 = VECTOR('',#100958,1.); +#100958 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100959 = ORIENTED_EDGE('',*,*,#99742,.T.); +#100960 = ORIENTED_EDGE('',*,*,#100936,.F.); +#100961 = PLANE('',#100962); +#100962 = AXIS2_PLACEMENT_3D('',#100963,#100964,#100965); +#100963 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#100964 = DIRECTION('',(1.,0.,0.)); +#100965 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100966 = ADVANCED_FACE('',(#100967),#100978,.F.); +#100967 = FACE_BOUND('',#100968,.F.); +#100968 = EDGE_LOOP('',(#100969,#100975,#100976,#100977)); +#100969 = ORIENTED_EDGE('',*,*,#100970,.T.); +#100970 = EDGE_CURVE('',#99601,#99751,#100971,.T.); +#100971 = LINE('',#100972,#100973); +#100972 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#100973 = VECTOR('',#100974,1.); +#100974 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100975 = ORIENTED_EDGE('',*,*,#99750,.T.); +#100976 = ORIENTED_EDGE('',*,*,#100954,.F.); +#100977 = ORIENTED_EDGE('',*,*,#99600,.F.); +#100978 = PLANE('',#100979); +#100979 = AXIS2_PLACEMENT_3D('',#100980,#100981,#100982); +#100980 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#100981 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100982 = DIRECTION('',(-1.,0.,0.)); +#100983 = ADVANCED_FACE('',(#100984),#100995,.F.); +#100984 = FACE_BOUND('',#100985,.F.); +#100985 = EDGE_LOOP('',(#100986,#100987,#100993,#100994)); +#100986 = ORIENTED_EDGE('',*,*,#99608,.F.); +#100987 = ORIENTED_EDGE('',*,*,#100988,.T.); +#100988 = EDGE_CURVE('',#99609,#99759,#100989,.T.); +#100989 = LINE('',#100990,#100991); +#100990 = CARTESIAN_POINT('',(0.15,-4.85,-2.542562962528)); +#100991 = VECTOR('',#100992,1.); +#100992 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100993 = ORIENTED_EDGE('',*,*,#99758,.T.); +#100994 = ORIENTED_EDGE('',*,*,#100970,.F.); +#100995 = PLANE('',#100996); +#100996 = AXIS2_PLACEMENT_3D('',#100997,#100998,#100999); +#100997 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#100998 = DIRECTION('',(-1.,0.,-0.)); +#100999 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#101000 = ADVANCED_FACE('',(#101001),#101012,.T.); +#101001 = FACE_BOUND('',#101002,.T.); +#101002 = EDGE_LOOP('',(#101003,#101004,#101010,#101011)); +#101003 = ORIENTED_EDGE('',*,*,#99650,.T.); +#101004 = ORIENTED_EDGE('',*,*,#101005,.T.); +#101005 = EDGE_CURVE('',#99643,#99793,#101006,.T.); +#101006 = LINE('',#101007,#101008); +#101007 = CARTESIAN_POINT('',(0.137769622714,-4.85,-0.540767924286)); +#101008 = VECTOR('',#101009,1.); +#101009 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101010 = ORIENTED_EDGE('',*,*,#99800,.F.); +#101011 = ORIENTED_EDGE('',*,*,#100519,.F.); +#101012 = CYLINDRICAL_SURFACE('',#101013,0.29); +#101013 = AXIS2_PLACEMENT_3D('',#101014,#101015,#101016); +#101014 = CARTESIAN_POINT('',(-0.14,-4.85,-0.457437037472)); +#101015 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101016 = DIRECTION('',(1.,0.,-0.)); +#101017 = ADVANCED_FACE('',(#101018),#101029,.T.); +#101018 = FACE_BOUND('',#101019,.T.); +#101019 = EDGE_LOOP('',(#101020,#101021,#101022,#101023)); +#101020 = ORIENTED_EDGE('',*,*,#99616,.T.); +#101021 = ORIENTED_EDGE('',*,*,#100988,.T.); +#101022 = ORIENTED_EDGE('',*,*,#99766,.F.); +#101023 = ORIENTED_EDGE('',*,*,#101024,.F.); +#101024 = EDGE_CURVE('',#99617,#99767,#101025,.T.); +#101025 = LINE('',#101026,#101027); +#101026 = CARTESIAN_POINT('',(0.137769622714,-4.85,-2.459232075714)); +#101027 = VECTOR('',#101028,1.); +#101028 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101029 = CYLINDRICAL_SURFACE('',#101030,0.29); +#101030 = AXIS2_PLACEMENT_3D('',#101031,#101032,#101033); +#101031 = CARTESIAN_POINT('',(-0.14,-4.85,-2.542562962528)); +#101032 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101033 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101034 = ADVANCED_FACE('',(#101035),#101046,.T.); +#101035 = FACE_BOUND('',#101036,.T.); +#101036 = EDGE_LOOP('',(#101037,#101038,#101044,#101045)); +#101037 = ORIENTED_EDGE('',*,*,#99642,.F.); +#101038 = ORIENTED_EDGE('',*,*,#101039,.T.); +#101039 = EDGE_CURVE('',#99634,#99784,#101040,.T.); +#101040 = LINE('',#101041,#101042); +#101041 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.416669113186)); +#101042 = VECTOR('',#101043,1.); +#101043 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101044 = ORIENTED_EDGE('',*,*,#99792,.T.); +#101045 = ORIENTED_EDGE('',*,*,#101005,.F.); +#101046 = PLANE('',#101047); +#101047 = AXIS2_PLACEMENT_3D('',#101048,#101049,#101050); +#101048 = CARTESIAN_POINT('',(-0.15,-4.85,-1.5)); +#101049 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101050 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#101051 = ADVANCED_FACE('',(#101052),#101063,.T.); +#101052 = FACE_BOUND('',#101053,.T.); +#101053 = EDGE_LOOP('',(#101054,#101055,#101056,#101057)); +#101054 = ORIENTED_EDGE('',*,*,#99625,.F.); +#101055 = ORIENTED_EDGE('',*,*,#101024,.T.); +#101056 = ORIENTED_EDGE('',*,*,#99775,.T.); +#101057 = ORIENTED_EDGE('',*,*,#101058,.F.); +#101058 = EDGE_CURVE('',#99626,#99776,#101059,.T.); +#101059 = LINE('',#101060,#101061); +#101060 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.583330886814)); +#101061 = VECTOR('',#101062,1.); +#101062 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101063 = PLANE('',#101064); +#101064 = AXIS2_PLACEMENT_3D('',#101065,#101066,#101067); +#101065 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#101066 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101067 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#101068 = ADVANCED_FACE('',(#101069),#101075,.F.); +#101069 = FACE_BOUND('',#101070,.F.); +#101070 = EDGE_LOOP('',(#101071,#101072,#101073,#101074)); +#101071 = ORIENTED_EDGE('',*,*,#101039,.T.); +#101072 = ORIENTED_EDGE('',*,*,#99783,.T.); +#101073 = ORIENTED_EDGE('',*,*,#101058,.F.); +#101074 = ORIENTED_EDGE('',*,*,#99633,.F.); +#101075 = CYLINDRICAL_SURFACE('',#101076,0.29); +#101076 = AXIS2_PLACEMENT_3D('',#101077,#101078,#101079); +#101077 = CARTESIAN_POINT('',(0.152768888758,-4.85,-1.5)); +#101078 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101079 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101080 = ADVANCED_FACE('',(#101081),#101097,.F.); +#101081 = FACE_BOUND('',#101082,.F.); +#101082 = EDGE_LOOP('',(#101083,#101084,#101090,#101091)); +#101083 = ORIENTED_EDGE('',*,*,#99873,.F.); +#101084 = ORIENTED_EDGE('',*,*,#101085,.T.); +#101085 = EDGE_CURVE('',#99874,#100048,#101086,.T.); +#101086 = LINE('',#101087,#101088); +#101087 = CARTESIAN_POINT('',(6.462230377286,-4.85,-0.540767924286)); +#101088 = VECTOR('',#101089,1.); +#101089 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101090 = ORIENTED_EDGE('',*,*,#100047,.T.); +#101091 = ORIENTED_EDGE('',*,*,#101092,.F.); +#101092 = EDGE_CURVE('',#99876,#100050,#101093,.T.); +#101093 = LINE('',#101094,#101095); +#101094 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.416669113186)); +#101095 = VECTOR('',#101096,1.); +#101096 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101097 = PLANE('',#101098); +#101098 = AXIS2_PLACEMENT_3D('',#101099,#101100,#101101); +#101099 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#101100 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101101 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#101102 = ADVANCED_FACE('',(#101103),#101114,.F.); +#101103 = FACE_BOUND('',#101104,.F.); +#101104 = EDGE_LOOP('',(#101105,#101106,#101112,#101113)); +#101105 = ORIENTED_EDGE('',*,*,#100008,.T.); +#101106 = ORIENTED_EDGE('',*,*,#101107,.T.); +#101107 = EDGE_CURVE('',#100001,#100168,#101108,.T.); +#101108 = LINE('',#101109,#101110); +#101109 = CARTESIAN_POINT('',(6.45,-4.85,-0.457437037472)); +#101110 = VECTOR('',#101111,1.); +#101111 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101112 = ORIENTED_EDGE('',*,*,#100175,.F.); +#101113 = ORIENTED_EDGE('',*,*,#101085,.F.); +#101114 = CYLINDRICAL_SURFACE('',#101115,0.29); +#101115 = AXIS2_PLACEMENT_3D('',#101116,#101117,#101118); +#101116 = CARTESIAN_POINT('',(6.74,-4.85,-0.457437037472)); +#101117 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101118 = DIRECTION('',(-0.957826285221,9.570607158983E-17, + -0.287347885566)); +#101119 = ADVANCED_FACE('',(#101120),#101131,.T.); +#101120 = FACE_BOUND('',#101121,.T.); +#101121 = EDGE_LOOP('',(#101122,#101123,#101129,#101130)); +#101122 = ORIENTED_EDGE('',*,*,#99883,.T.); +#101123 = ORIENTED_EDGE('',*,*,#101124,.T.); +#101124 = EDGE_CURVE('',#99884,#100058,#101125,.T.); +#101125 = LINE('',#101126,#101127); +#101126 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.583330886814)); +#101127 = VECTOR('',#101128,1.); +#101128 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101129 = ORIENTED_EDGE('',*,*,#100057,.F.); +#101130 = ORIENTED_EDGE('',*,*,#101092,.F.); +#101131 = CYLINDRICAL_SURFACE('',#101132,0.29); +#101132 = AXIS2_PLACEMENT_3D('',#101133,#101134,#101135); +#101133 = CARTESIAN_POINT('',(6.447231111242,-4.85,-1.5)); +#101134 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101135 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101136 = ADVANCED_FACE('',(#101137),#101148,.T.); +#101137 = FACE_BOUND('',#101138,.T.); +#101138 = EDGE_LOOP('',(#101139,#101140,#101141,#101142)); +#101139 = ORIENTED_EDGE('',*,*,#100000,.F.); +#101140 = ORIENTED_EDGE('',*,*,#101107,.T.); +#101141 = ORIENTED_EDGE('',*,*,#100167,.T.); +#101142 = ORIENTED_EDGE('',*,*,#101143,.F.); +#101143 = EDGE_CURVE('',#99992,#100159,#101144,.T.); +#101144 = LINE('',#101145,#101146); +#101145 = CARTESIAN_POINT('',(6.45,-4.85,1.21)); +#101146 = VECTOR('',#101147,1.); +#101147 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101148 = PLANE('',#101149); +#101149 = AXIS2_PLACEMENT_3D('',#101150,#101151,#101152); +#101150 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#101151 = DIRECTION('',(1.,0.,0.)); +#101152 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101153 = ADVANCED_FACE('',(#101154),#101165,.F.); +#101154 = FACE_BOUND('',#101155,.F.); +#101155 = EDGE_LOOP('',(#101156,#101157,#101158,#101159)); +#101156 = ORIENTED_EDGE('',*,*,#99892,.F.); +#101157 = ORIENTED_EDGE('',*,*,#101124,.T.); +#101158 = ORIENTED_EDGE('',*,*,#100066,.T.); +#101159 = ORIENTED_EDGE('',*,*,#101160,.F.); +#101160 = EDGE_CURVE('',#99893,#100067,#101161,.T.); +#101161 = LINE('',#101162,#101163); +#101162 = CARTESIAN_POINT('',(6.462230377286,-4.85,-2.459232075714)); +#101163 = VECTOR('',#101164,1.); +#101164 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101165 = PLANE('',#101166); +#101166 = AXIS2_PLACEMENT_3D('',#101167,#101168,#101169); +#101167 = CARTESIAN_POINT('',(6.75,-4.85,-1.5)); +#101168 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101169 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#101170 = ADVANCED_FACE('',(#101171),#101177,.T.); +#101171 = FACE_BOUND('',#101172,.T.); +#101172 = EDGE_LOOP('',(#101173,#101174,#101175,#101176)); +#101173 = ORIENTED_EDGE('',*,*,#101143,.T.); +#101174 = ORIENTED_EDGE('',*,*,#100158,.T.); +#101175 = ORIENTED_EDGE('',*,*,#100024,.F.); +#101176 = ORIENTED_EDGE('',*,*,#99991,.F.); +#101177 = CYLINDRICAL_SURFACE('',#101178,0.29); +#101178 = AXIS2_PLACEMENT_3D('',#101179,#101180,#101181); +#101179 = CARTESIAN_POINT('',(6.16,-4.85,1.21)); +#101180 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101181 = DIRECTION('',(1.,0.,-0.)); +#101182 = ADVANCED_FACE('',(#101183),#101194,.F.); +#101183 = FACE_BOUND('',#101184,.F.); +#101184 = EDGE_LOOP('',(#101185,#101186,#101187,#101188)); +#101185 = ORIENTED_EDGE('',*,*,#99900,.T.); +#101186 = ORIENTED_EDGE('',*,*,#101160,.T.); +#101187 = ORIENTED_EDGE('',*,*,#100074,.F.); +#101188 = ORIENTED_EDGE('',*,*,#101189,.F.); +#101189 = EDGE_CURVE('',#99901,#100075,#101190,.T.); +#101190 = LINE('',#101191,#101192); +#101191 = CARTESIAN_POINT('',(6.45,-4.85,-2.542562962528)); +#101192 = VECTOR('',#101193,1.); +#101193 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101194 = CYLINDRICAL_SURFACE('',#101195,0.29); +#101195 = AXIS2_PLACEMENT_3D('',#101196,#101197,#101198); +#101196 = CARTESIAN_POINT('',(6.74,-4.85,-2.542562962528)); +#101197 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101198 = DIRECTION('',(-1.,0.,0.)); +#101199 = ADVANCED_FACE('',(#101200),#101211,.T.); +#101200 = FACE_BOUND('',#101201,.T.); +#101201 = EDGE_LOOP('',(#101202,#101203,#101209,#101210)); +#101202 = ORIENTED_EDGE('',*,*,#99909,.F.); +#101203 = ORIENTED_EDGE('',*,*,#101204,.T.); +#101204 = EDGE_CURVE('',#99910,#100084,#101205,.T.); +#101205 = LINE('',#101206,#101207); +#101206 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#101207 = VECTOR('',#101208,1.); +#101208 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101209 = ORIENTED_EDGE('',*,*,#100083,.T.); +#101210 = ORIENTED_EDGE('',*,*,#101189,.F.); +#101211 = PLANE('',#101212); +#101212 = AXIS2_PLACEMENT_3D('',#101213,#101214,#101215); +#101213 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#101214 = DIRECTION('',(1.,0.,0.)); +#101215 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101216 = ADVANCED_FACE('',(#101217),#101228,.T.); +#101217 = FACE_BOUND('',#101218,.T.); +#101218 = EDGE_LOOP('',(#101219,#101225,#101226,#101227)); +#101219 = ORIENTED_EDGE('',*,*,#101220,.T.); +#101220 = EDGE_CURVE('',#99918,#100092,#101221,.T.); +#101221 = LINE('',#101222,#101223); +#101222 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#101223 = VECTOR('',#101224,1.); +#101224 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101225 = ORIENTED_EDGE('',*,*,#100091,.T.); +#101226 = ORIENTED_EDGE('',*,*,#101204,.F.); +#101227 = ORIENTED_EDGE('',*,*,#99917,.F.); +#101228 = PLANE('',#101229); +#101229 = AXIS2_PLACEMENT_3D('',#101230,#101231,#101232); +#101230 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#101231 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#101232 = DIRECTION('',(1.,0.,0.)); +#101233 = ADVANCED_FACE('',(#101234),#101245,.T.); +#101234 = FACE_BOUND('',#101235,.T.); +#101235 = EDGE_LOOP('',(#101236,#101237,#101243,#101244)); +#101236 = ORIENTED_EDGE('',*,*,#99925,.F.); +#101237 = ORIENTED_EDGE('',*,*,#101238,.T.); +#101238 = EDGE_CURVE('',#99926,#100100,#101239,.T.); +#101239 = LINE('',#101240,#101241); +#101240 = CARTESIAN_POINT('',(6.15,-4.85,-2.542562962528)); +#101241 = VECTOR('',#101242,1.); +#101242 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101243 = ORIENTED_EDGE('',*,*,#100099,.T.); +#101244 = ORIENTED_EDGE('',*,*,#101220,.F.); +#101245 = PLANE('',#101246); +#101246 = AXIS2_PLACEMENT_3D('',#101247,#101248,#101249); +#101247 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#101248 = DIRECTION('',(-1.,0.,-0.)); +#101249 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#101250 = ADVANCED_FACE('',(#101251),#101262,.T.); +#101251 = FACE_BOUND('',#101252,.T.); +#101252 = EDGE_LOOP('',(#101253,#101254,#101255,#101261)); +#101253 = ORIENTED_EDGE('',*,*,#100536,.T.); +#101254 = ORIENTED_EDGE('',*,*,#100141,.T.); +#101255 = ORIENTED_EDGE('',*,*,#101256,.F.); +#101256 = EDGE_CURVE('',#99960,#100134,#101257,.T.); +#101257 = LINE('',#101258,#101259); +#101258 = CARTESIAN_POINT('',(6.162230377286,-4.85,-0.540767924286)); +#101259 = VECTOR('',#101260,1.); +#101260 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101261 = ORIENTED_EDGE('',*,*,#99967,.F.); +#101262 = CYLINDRICAL_SURFACE('',#101263,0.29); +#101263 = AXIS2_PLACEMENT_3D('',#101264,#101265,#101266); +#101264 = CARTESIAN_POINT('',(6.44,-4.85,-0.457437037472)); +#101265 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101266 = DIRECTION('',(-1.,0.,0.)); +#101267 = ADVANCED_FACE('',(#101268),#101279,.T.); +#101268 = FACE_BOUND('',#101269,.T.); +#101269 = EDGE_LOOP('',(#101270,#101276,#101277,#101278)); +#101270 = ORIENTED_EDGE('',*,*,#101271,.T.); +#101271 = EDGE_CURVE('',#99934,#100108,#101272,.T.); +#101272 = LINE('',#101273,#101274); +#101273 = CARTESIAN_POINT('',(6.162230377286,-4.85,-2.459232075714)); +#101274 = VECTOR('',#101275,1.); +#101275 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101276 = ORIENTED_EDGE('',*,*,#100107,.T.); +#101277 = ORIENTED_EDGE('',*,*,#101238,.F.); +#101278 = ORIENTED_EDGE('',*,*,#99933,.F.); +#101279 = CYLINDRICAL_SURFACE('',#101280,0.29); +#101280 = AXIS2_PLACEMENT_3D('',#101281,#101282,#101283); +#101281 = CARTESIAN_POINT('',(6.44,-4.85,-2.542562962528)); +#101282 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101283 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101284 = ADVANCED_FACE('',(#101285),#101296,.F.); +#101285 = FACE_BOUND('',#101286,.F.); +#101286 = EDGE_LOOP('',(#101287,#101288,#101294,#101295)); +#101287 = ORIENTED_EDGE('',*,*,#99959,.F.); +#101288 = ORIENTED_EDGE('',*,*,#101289,.T.); +#101289 = EDGE_CURVE('',#99951,#100125,#101290,.T.); +#101290 = LINE('',#101291,#101292); +#101291 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.416669113186)); +#101292 = VECTOR('',#101293,1.); +#101293 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101294 = ORIENTED_EDGE('',*,*,#100133,.T.); +#101295 = ORIENTED_EDGE('',*,*,#101256,.F.); +#101296 = PLANE('',#101297); +#101297 = AXIS2_PLACEMENT_3D('',#101298,#101299,#101300); +#101298 = CARTESIAN_POINT('',(6.45,-4.85,-1.5)); +#101299 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101300 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#101301 = ADVANCED_FACE('',(#101302),#101313,.F.); +#101302 = FACE_BOUND('',#101303,.F.); +#101303 = EDGE_LOOP('',(#101304,#101305,#101306,#101307)); +#101304 = ORIENTED_EDGE('',*,*,#99942,.F.); +#101305 = ORIENTED_EDGE('',*,*,#101271,.T.); +#101306 = ORIENTED_EDGE('',*,*,#100116,.T.); +#101307 = ORIENTED_EDGE('',*,*,#101308,.F.); +#101308 = EDGE_CURVE('',#99943,#100117,#101309,.T.); +#101309 = LINE('',#101310,#101311); +#101310 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.583330886814)); +#101311 = VECTOR('',#101312,1.); +#101312 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101313 = PLANE('',#101314); +#101314 = AXIS2_PLACEMENT_3D('',#101315,#101316,#101317); +#101315 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#101316 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101317 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#101318 = ADVANCED_FACE('',(#101319),#101325,.F.); +#101319 = FACE_BOUND('',#101320,.F.); +#101320 = EDGE_LOOP('',(#101321,#101322,#101323,#101324)); +#101321 = ORIENTED_EDGE('',*,*,#99950,.T.); +#101322 = ORIENTED_EDGE('',*,*,#101308,.T.); +#101323 = ORIENTED_EDGE('',*,*,#100124,.F.); +#101324 = ORIENTED_EDGE('',*,*,#101289,.F.); +#101325 = CYLINDRICAL_SURFACE('',#101326,0.29); +#101326 = AXIS2_PLACEMENT_3D('',#101327,#101328,#101329); +#101327 = CARTESIAN_POINT('',(6.147231111242,-4.85,-1.5)); +#101328 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101329 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101330 = ADVANCED_FACE('',(#101331),#101347,.F.); +#101331 = FACE_BOUND('',#101332,.F.); +#101332 = EDGE_LOOP('',(#101333,#101334,#101340,#101341)); +#101333 = ORIENTED_EDGE('',*,*,#100340,.F.); +#101334 = ORIENTED_EDGE('',*,*,#101335,.T.); +#101335 = EDGE_CURVE('',#100341,#100191,#101336,.T.); +#101336 = LINE('',#101337,#101338); +#101337 = CARTESIAN_POINT('',(6.462230377286,-0.35,-0.540767924286)); +#101338 = VECTOR('',#101339,1.); +#101339 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101340 = ORIENTED_EDGE('',*,*,#100190,.T.); +#101341 = ORIENTED_EDGE('',*,*,#101342,.F.); +#101342 = EDGE_CURVE('',#100343,#100193,#101343,.T.); +#101343 = LINE('',#101344,#101345); +#101344 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.416669113186)); +#101345 = VECTOR('',#101346,1.); +#101346 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101347 = PLANE('',#101348); +#101348 = AXIS2_PLACEMENT_3D('',#101349,#101350,#101351); +#101349 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#101350 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101351 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#101352 = ADVANCED_FACE('',(#101353),#101364,.F.); +#101353 = FACE_BOUND('',#101354,.F.); +#101354 = EDGE_LOOP('',(#101355,#101356,#101362,#101363)); +#101355 = ORIENTED_EDGE('',*,*,#100475,.T.); +#101356 = ORIENTED_EDGE('',*,*,#101357,.T.); +#101357 = EDGE_CURVE('',#100468,#100318,#101358,.T.); +#101358 = LINE('',#101359,#101360); +#101359 = CARTESIAN_POINT('',(6.45,-0.35,-0.457437037472)); +#101360 = VECTOR('',#101361,1.); +#101361 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101362 = ORIENTED_EDGE('',*,*,#100325,.F.); +#101363 = ORIENTED_EDGE('',*,*,#101335,.F.); +#101364 = CYLINDRICAL_SURFACE('',#101365,0.29); +#101365 = AXIS2_PLACEMENT_3D('',#101366,#101367,#101368); +#101366 = CARTESIAN_POINT('',(6.74,-0.35,-0.457437037472)); +#101367 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101368 = DIRECTION('',(-0.957826285221,9.570607158983E-17, + -0.287347885566)); +#101369 = ADVANCED_FACE('',(#101370),#101381,.T.); +#101370 = FACE_BOUND('',#101371,.T.); +#101371 = EDGE_LOOP('',(#101372,#101373,#101379,#101380)); +#101372 = ORIENTED_EDGE('',*,*,#100350,.T.); +#101373 = ORIENTED_EDGE('',*,*,#101374,.T.); +#101374 = EDGE_CURVE('',#100351,#100201,#101375,.T.); +#101375 = LINE('',#101376,#101377); +#101376 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.583330886814)); +#101377 = VECTOR('',#101378,1.); +#101378 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101379 = ORIENTED_EDGE('',*,*,#100200,.F.); +#101380 = ORIENTED_EDGE('',*,*,#101342,.F.); +#101381 = CYLINDRICAL_SURFACE('',#101382,0.29); +#101382 = AXIS2_PLACEMENT_3D('',#101383,#101384,#101385); +#101383 = CARTESIAN_POINT('',(6.447231111242,-0.35,-1.5)); +#101384 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101385 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101386 = ADVANCED_FACE('',(#101387),#101398,.T.); +#101387 = FACE_BOUND('',#101388,.T.); +#101388 = EDGE_LOOP('',(#101389,#101390,#101391,#101392)); +#101389 = ORIENTED_EDGE('',*,*,#100467,.F.); +#101390 = ORIENTED_EDGE('',*,*,#101357,.T.); +#101391 = ORIENTED_EDGE('',*,*,#100317,.T.); +#101392 = ORIENTED_EDGE('',*,*,#101393,.F.); +#101393 = EDGE_CURVE('',#100459,#100309,#101394,.T.); +#101394 = LINE('',#101395,#101396); +#101395 = CARTESIAN_POINT('',(6.45,-0.35,1.21)); +#101396 = VECTOR('',#101397,1.); +#101397 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101398 = PLANE('',#101399); +#101399 = AXIS2_PLACEMENT_3D('',#101400,#101401,#101402); +#101400 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#101401 = DIRECTION('',(1.,0.,0.)); +#101402 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101403 = ADVANCED_FACE('',(#101404),#101415,.F.); +#101404 = FACE_BOUND('',#101405,.F.); +#101405 = EDGE_LOOP('',(#101406,#101407,#101408,#101409)); +#101406 = ORIENTED_EDGE('',*,*,#100359,.F.); +#101407 = ORIENTED_EDGE('',*,*,#101374,.T.); +#101408 = ORIENTED_EDGE('',*,*,#100209,.T.); +#101409 = ORIENTED_EDGE('',*,*,#101410,.F.); +#101410 = EDGE_CURVE('',#100360,#100210,#101411,.T.); +#101411 = LINE('',#101412,#101413); +#101412 = CARTESIAN_POINT('',(6.462230377286,-0.35,-2.459232075714)); +#101413 = VECTOR('',#101414,1.); +#101414 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101415 = PLANE('',#101416); +#101416 = AXIS2_PLACEMENT_3D('',#101417,#101418,#101419); +#101417 = CARTESIAN_POINT('',(6.75,-0.35,-1.5)); +#101418 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101419 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#101420 = ADVANCED_FACE('',(#101421),#101427,.T.); +#101421 = FACE_BOUND('',#101422,.T.); +#101422 = EDGE_LOOP('',(#101423,#101424,#101425,#101426)); +#101423 = ORIENTED_EDGE('',*,*,#101393,.T.); +#101424 = ORIENTED_EDGE('',*,*,#100308,.T.); +#101425 = ORIENTED_EDGE('',*,*,#100491,.F.); +#101426 = ORIENTED_EDGE('',*,*,#100458,.F.); +#101427 = CYLINDRICAL_SURFACE('',#101428,0.29); +#101428 = AXIS2_PLACEMENT_3D('',#101429,#101430,#101431); +#101429 = CARTESIAN_POINT('',(6.16,-0.35,1.21)); +#101430 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101431 = DIRECTION('',(1.,0.,-0.)); +#101432 = ADVANCED_FACE('',(#101433),#101444,.F.); +#101433 = FACE_BOUND('',#101434,.F.); +#101434 = EDGE_LOOP('',(#101435,#101436,#101437,#101438)); +#101435 = ORIENTED_EDGE('',*,*,#100367,.T.); +#101436 = ORIENTED_EDGE('',*,*,#101410,.T.); +#101437 = ORIENTED_EDGE('',*,*,#100217,.F.); +#101438 = ORIENTED_EDGE('',*,*,#101439,.F.); +#101439 = EDGE_CURVE('',#100368,#100218,#101440,.T.); +#101440 = LINE('',#101441,#101442); +#101441 = CARTESIAN_POINT('',(6.45,-0.35,-2.542562962528)); +#101442 = VECTOR('',#101443,1.); +#101443 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101444 = CYLINDRICAL_SURFACE('',#101445,0.29); +#101445 = AXIS2_PLACEMENT_3D('',#101446,#101447,#101448); +#101446 = CARTESIAN_POINT('',(6.74,-0.35,-2.542562962528)); +#101447 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101448 = DIRECTION('',(-1.,0.,0.)); +#101449 = ADVANCED_FACE('',(#101450),#101461,.T.); +#101450 = FACE_BOUND('',#101451,.T.); +#101451 = EDGE_LOOP('',(#101452,#101453,#101459,#101460)); +#101452 = ORIENTED_EDGE('',*,*,#100376,.F.); +#101453 = ORIENTED_EDGE('',*,*,#101454,.T.); +#101454 = EDGE_CURVE('',#100377,#100227,#101455,.T.); +#101455 = LINE('',#101456,#101457); +#101456 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#101457 = VECTOR('',#101458,1.); +#101458 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101459 = ORIENTED_EDGE('',*,*,#100226,.T.); +#101460 = ORIENTED_EDGE('',*,*,#101439,.F.); +#101461 = PLANE('',#101462); +#101462 = AXIS2_PLACEMENT_3D('',#101463,#101464,#101465); +#101463 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#101464 = DIRECTION('',(1.,0.,0.)); +#101465 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101466 = ADVANCED_FACE('',(#101467),#101478,.T.); +#101467 = FACE_BOUND('',#101468,.T.); +#101468 = EDGE_LOOP('',(#101469,#101475,#101476,#101477)); +#101469 = ORIENTED_EDGE('',*,*,#101470,.T.); +#101470 = EDGE_CURVE('',#100385,#100235,#101471,.T.); +#101471 = LINE('',#101472,#101473); +#101472 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#101473 = VECTOR('',#101474,1.); +#101474 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101475 = ORIENTED_EDGE('',*,*,#100234,.T.); +#101476 = ORIENTED_EDGE('',*,*,#101454,.F.); +#101477 = ORIENTED_EDGE('',*,*,#100384,.F.); +#101478 = PLANE('',#101479); +#101479 = AXIS2_PLACEMENT_3D('',#101480,#101481,#101482); +#101480 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#101481 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#101482 = DIRECTION('',(1.,0.,0.)); +#101483 = ADVANCED_FACE('',(#101484),#101495,.T.); +#101484 = FACE_BOUND('',#101485,.T.); +#101485 = EDGE_LOOP('',(#101486,#101487,#101493,#101494)); +#101486 = ORIENTED_EDGE('',*,*,#100392,.F.); +#101487 = ORIENTED_EDGE('',*,*,#101488,.T.); +#101488 = EDGE_CURVE('',#100393,#100243,#101489,.T.); +#101489 = LINE('',#101490,#101491); +#101490 = CARTESIAN_POINT('',(6.15,-0.35,-2.542562962528)); +#101491 = VECTOR('',#101492,1.); +#101492 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101493 = ORIENTED_EDGE('',*,*,#100242,.T.); +#101494 = ORIENTED_EDGE('',*,*,#101470,.F.); +#101495 = PLANE('',#101496); +#101496 = AXIS2_PLACEMENT_3D('',#101497,#101498,#101499); +#101497 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#101498 = DIRECTION('',(-1.,0.,-0.)); +#101499 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#101500 = ADVANCED_FACE('',(#101501),#101512,.T.); +#101501 = FACE_BOUND('',#101502,.T.); +#101502 = EDGE_LOOP('',(#101503,#101504,#101505,#101511)); +#101503 = ORIENTED_EDGE('',*,*,#100570,.T.); +#101504 = ORIENTED_EDGE('',*,*,#100284,.T.); +#101505 = ORIENTED_EDGE('',*,*,#101506,.F.); +#101506 = EDGE_CURVE('',#100427,#100277,#101507,.T.); +#101507 = LINE('',#101508,#101509); +#101508 = CARTESIAN_POINT('',(6.162230377286,-0.35,-0.540767924286)); +#101509 = VECTOR('',#101510,1.); +#101510 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101511 = ORIENTED_EDGE('',*,*,#100434,.F.); +#101512 = CYLINDRICAL_SURFACE('',#101513,0.29); +#101513 = AXIS2_PLACEMENT_3D('',#101514,#101515,#101516); +#101514 = CARTESIAN_POINT('',(6.44,-0.35,-0.457437037472)); +#101515 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101516 = DIRECTION('',(-1.,0.,0.)); +#101517 = ADVANCED_FACE('',(#101518),#101529,.T.); +#101518 = FACE_BOUND('',#101519,.T.); +#101519 = EDGE_LOOP('',(#101520,#101526,#101527,#101528)); +#101520 = ORIENTED_EDGE('',*,*,#101521,.T.); +#101521 = EDGE_CURVE('',#100401,#100251,#101522,.T.); +#101522 = LINE('',#101523,#101524); +#101523 = CARTESIAN_POINT('',(6.162230377286,-0.35,-2.459232075714)); +#101524 = VECTOR('',#101525,1.); +#101525 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101526 = ORIENTED_EDGE('',*,*,#100250,.T.); +#101527 = ORIENTED_EDGE('',*,*,#101488,.F.); +#101528 = ORIENTED_EDGE('',*,*,#100400,.F.); +#101529 = CYLINDRICAL_SURFACE('',#101530,0.29); +#101530 = AXIS2_PLACEMENT_3D('',#101531,#101532,#101533); +#101531 = CARTESIAN_POINT('',(6.44,-0.35,-2.542562962528)); +#101532 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101533 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101534 = ADVANCED_FACE('',(#101535),#101546,.F.); +#101535 = FACE_BOUND('',#101536,.F.); +#101536 = EDGE_LOOP('',(#101537,#101538,#101544,#101545)); +#101537 = ORIENTED_EDGE('',*,*,#100426,.F.); +#101538 = ORIENTED_EDGE('',*,*,#101539,.T.); +#101539 = EDGE_CURVE('',#100418,#100268,#101540,.T.); +#101540 = LINE('',#101541,#101542); +#101541 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.416669113186)); +#101542 = VECTOR('',#101543,1.); +#101543 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101544 = ORIENTED_EDGE('',*,*,#100276,.T.); +#101545 = ORIENTED_EDGE('',*,*,#101506,.F.); +#101546 = PLANE('',#101547); +#101547 = AXIS2_PLACEMENT_3D('',#101548,#101549,#101550); +#101548 = CARTESIAN_POINT('',(6.45,-0.35,-1.5)); +#101549 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101550 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#101551 = ADVANCED_FACE('',(#101552),#101563,.F.); +#101552 = FACE_BOUND('',#101553,.F.); +#101553 = EDGE_LOOP('',(#101554,#101555,#101556,#101557)); +#101554 = ORIENTED_EDGE('',*,*,#100409,.F.); +#101555 = ORIENTED_EDGE('',*,*,#101521,.T.); +#101556 = ORIENTED_EDGE('',*,*,#100259,.T.); +#101557 = ORIENTED_EDGE('',*,*,#101558,.F.); +#101558 = EDGE_CURVE('',#100410,#100260,#101559,.T.); +#101559 = LINE('',#101560,#101561); +#101560 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.583330886814)); +#101561 = VECTOR('',#101562,1.); +#101562 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101563 = PLANE('',#101564); +#101564 = AXIS2_PLACEMENT_3D('',#101565,#101566,#101567); +#101565 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#101566 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101567 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#101568 = ADVANCED_FACE('',(#101569),#101575,.F.); +#101569 = FACE_BOUND('',#101570,.F.); +#101570 = EDGE_LOOP('',(#101571,#101572,#101573,#101574)); +#101571 = ORIENTED_EDGE('',*,*,#100417,.T.); +#101572 = ORIENTED_EDGE('',*,*,#101558,.T.); +#101573 = ORIENTED_EDGE('',*,*,#100267,.F.); +#101574 = ORIENTED_EDGE('',*,*,#101539,.F.); +#101575 = CYLINDRICAL_SURFACE('',#101576,0.29); +#101576 = AXIS2_PLACEMENT_3D('',#101577,#101578,#101579); +#101577 = CARTESIAN_POINT('',(6.147231111242,-0.35,-1.5)); +#101578 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101579 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#101584)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#101581,#101582,#101583)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#101581 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#101582 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#101583 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#101584 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#101581, + 'distance_accuracy_value','confusion accuracy'); +#101585 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101586,#101588); +#101586 = ( REPRESENTATION_RELATIONSHIP('','',#98350,#98327) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101587) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101587 = ITEM_DEFINED_TRANSFORMATION('','',#11,#98328); +#101588 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101589); +#101589 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('122','=>[0:1:1:60]','',#98322, + #98345,$); +#101590 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#98347)); +#101591 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101592,#101594); +#101592 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101593) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101593 = ITEM_DEFINED_TRANSFORMATION('','',#11,#375); +#101594 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101595); +#101595 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('124','R58','',#5,#523,$); +#101596 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101597,#101599); +#101597 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101598) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101598 = ITEM_DEFINED_TRANSFORMATION('','',#11,#379); +#101599 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101600); +#101600 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('125','Rrp','',#5,#523,$); +#101601 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101602,#101604); +#101602 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101603) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101603 = ITEM_DEFINED_TRANSFORMATION('','',#11,#383); +#101604 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101605); +#101605 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('126','Q6','',#5,#36156,$); +#101606 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101607,#101609); +#101607 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101608) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101608 = ITEM_DEFINED_TRANSFORMATION('','',#11,#387); +#101609 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101610); +#101610 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('127','C31','',#5,#14742,$); +#101611 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101612,#101614); +#101612 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101613) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101613 = ITEM_DEFINED_TRANSFORMATION('','',#11,#391); +#101614 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101615); +#101615 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('128','R21','',#5,#523,$); +#101616 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101617,#101619); +#101617 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101618) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101618 = ITEM_DEFINED_TRANSFORMATION('','',#11,#395); +#101619 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101620); +#101620 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('129','C30','',#5,#42695,$); +#101621 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101622,#101624); +#101622 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101623) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101623 = ITEM_DEFINED_TRANSFORMATION('','',#11,#399); +#101624 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101625); +#101625 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('130','R7','',#5,#523,$); +#101626 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101627,#101629); +#101627 = ( REPRESENTATION_RELATIONSHIP('','',#88978,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101628) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101628 = ITEM_DEFINED_TRANSFORMATION('','',#11,#403); +#101629 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101630); +#101630 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('131','C3','',#5,#88973,$); +#101631 = SHAPE_DEFINITION_REPRESENTATION(#101632,#101638); +#101632 = PRODUCT_DEFINITION_SHAPE('','',#101633); +#101633 = PRODUCT_DEFINITION('design','',#101634,#101637); +#101634 = PRODUCT_DEFINITION_FORMATION('','',#101635); +#101635 = PRODUCT('D_SOD-123','D_SOD-123','',(#101636)); +#101636 = PRODUCT_CONTEXT('',#2,'mechanical'); +#101637 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#101638 = SHAPE_REPRESENTATION('',(#11,#101639),#101643); +#101639 = AXIS2_PLACEMENT_3D('',#101640,#101641,#101642); +#101640 = CARTESIAN_POINT('',(0.,0.,0.)); +#101641 = DIRECTION('',(0.,0.,1.)); +#101642 = DIRECTION('',(1.,0.,-0.)); +#101643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#101647)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#101644,#101645,#101646)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#101644 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#101645 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#101646 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#101647 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#101644, + 'distance_accuracy_value','confusion accuracy'); +#101648 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101649,#101651); +#101649 = ( REPRESENTATION_RELATIONSHIP('','',#101638,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101650) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101650 = ITEM_DEFINED_TRANSFORMATION('','',#11,#407); +#101651 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101652); +#101652 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('133','D5','',#5,#101633,$); +#101653 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#101635)); +#101654 = SHAPE_DEFINITION_REPRESENTATION(#101655,#101661); +#101655 = PRODUCT_DEFINITION_SHAPE('','',#101656); +#101656 = PRODUCT_DEFINITION('design','',#101657,#101660); +#101657 = PRODUCT_DEFINITION_FORMATION('','',#101658); +#101658 = PRODUCT('D_SOD-123','D_SOD-123','',(#101659)); +#101659 = PRODUCT_CONTEXT('',#2,'mechanical'); +#101660 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#101661 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#101662),#103350); +#101662 = MANIFOLD_SOLID_BREP('',#101663); +#101663 = CLOSED_SHELL('',(#101664,#101718,#101781,#101804,#101834, + #101867,#101897,#101920,#101943,#101966,#101989,#102012,#102045, + #102068,#102091,#102179,#102254,#102278,#102346,#102434,#102450, + #102466,#102482,#102498,#102515,#102548,#102565,#102587,#102618, + #102641,#102664,#102687,#102717,#102734,#102751,#102768,#102785, + #102802,#102819,#102836,#102848,#102871,#102894,#102911,#102986, + #103010,#103078,#103095,#103145,#103162,#103179,#103196,#103213, + #103230,#103242,#103273,#103297,#103321,#103338)); +#101664 = ADVANCED_FACE('',(#101665),#101713,.F.); +#101665 = FACE_BOUND('',#101666,.F.); +#101666 = EDGE_LOOP('',(#101667,#101677,#101684,#101692,#101700,#101708) + ); +#101667 = ORIENTED_EDGE('',*,*,#101668,.T.); +#101668 = EDGE_CURVE('',#101669,#101671,#101673,.T.); +#101669 = VERTEX_POINT('',#101670); +#101670 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101671 = VERTEX_POINT('',#101672); +#101672 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101673 = LINE('',#101674,#101675); +#101674 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101675 = VECTOR('',#101676,1.); +#101676 = DIRECTION('',(0.,1.,0.)); +#101677 = ORIENTED_EDGE('',*,*,#101678,.T.); +#101678 = EDGE_CURVE('',#101671,#101679,#101681,.T.); +#101679 = VERTEX_POINT('',#101680); +#101680 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101681 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101682,#101683), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101682 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101683 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101684 = ORIENTED_EDGE('',*,*,#101685,.F.); +#101685 = EDGE_CURVE('',#101686,#101679,#101688,.T.); +#101686 = VERTEX_POINT('',#101687); +#101687 = CARTESIAN_POINT('',(-1.375,0.325,0.575)); +#101688 = LINE('',#101689,#101690); +#101689 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101690 = VECTOR('',#101691,1.); +#101691 = DIRECTION('',(0.,1.,0.)); +#101692 = ORIENTED_EDGE('',*,*,#101693,.F.); +#101693 = EDGE_CURVE('',#101694,#101686,#101696,.T.); +#101694 = VERTEX_POINT('',#101695); +#101695 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#101696 = LINE('',#101697,#101698); +#101697 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#101698 = VECTOR('',#101699,1.); +#101699 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#101700 = ORIENTED_EDGE('',*,*,#101701,.F.); +#101701 = EDGE_CURVE('',#101702,#101694,#101704,.T.); +#101702 = VERTEX_POINT('',#101703); +#101703 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101704 = LINE('',#101705,#101706); +#101705 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101706 = VECTOR('',#101707,1.); +#101707 = DIRECTION('',(0.,1.,0.)); +#101708 = ORIENTED_EDGE('',*,*,#101709,.F.); +#101709 = EDGE_CURVE('',#101669,#101702,#101710,.T.); +#101710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101711,#101712), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101711 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101712 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101713 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101714,#101715) + ,(#101716,#101717 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101714 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101715 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101716 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101717 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101718 = ADVANCED_FACE('',(#101719),#101776,.F.); +#101719 = FACE_BOUND('',#101720,.T.); +#101720 = EDGE_LOOP('',(#101721,#101722,#101730,#101738,#101746,#101754, + #101762,#101770)); +#101721 = ORIENTED_EDGE('',*,*,#101668,.T.); +#101722 = ORIENTED_EDGE('',*,*,#101723,.T.); +#101723 = EDGE_CURVE('',#101671,#101724,#101726,.T.); +#101724 = VERTEX_POINT('',#101725); +#101725 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101726 = LINE('',#101727,#101728); +#101727 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101728 = VECTOR('',#101729,1.); +#101729 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#101730 = ORIENTED_EDGE('',*,*,#101731,.T.); +#101731 = EDGE_CURVE('',#101724,#101732,#101734,.T.); +#101732 = VERTEX_POINT('',#101733); +#101733 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101734 = LINE('',#101735,#101736); +#101735 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101736 = VECTOR('',#101737,1.); +#101737 = DIRECTION('',(1.,0.,0.)); +#101738 = ORIENTED_EDGE('',*,*,#101739,.T.); +#101739 = EDGE_CURVE('',#101732,#101740,#101742,.T.); +#101740 = VERTEX_POINT('',#101741); +#101741 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#101742 = LINE('',#101743,#101744); +#101743 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101744 = VECTOR('',#101745,1.); +#101745 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#101746 = ORIENTED_EDGE('',*,*,#101747,.T.); +#101747 = EDGE_CURVE('',#101740,#101748,#101750,.T.); +#101748 = VERTEX_POINT('',#101749); +#101749 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101750 = LINE('',#101751,#101752); +#101751 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#101752 = VECTOR('',#101753,1.); +#101753 = DIRECTION('',(0.,-1.,0.)); +#101754 = ORIENTED_EDGE('',*,*,#101755,.T.); +#101755 = EDGE_CURVE('',#101748,#101756,#101758,.T.); +#101756 = VERTEX_POINT('',#101757); +#101757 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101758 = LINE('',#101759,#101760); +#101759 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101760 = VECTOR('',#101761,1.); +#101761 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#101762 = ORIENTED_EDGE('',*,*,#101763,.T.); +#101763 = EDGE_CURVE('',#101756,#101764,#101766,.T.); +#101764 = VERTEX_POINT('',#101765); +#101765 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101766 = LINE('',#101767,#101768); +#101767 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101768 = VECTOR('',#101769,1.); +#101769 = DIRECTION('',(-1.,0.,0.)); +#101770 = ORIENTED_EDGE('',*,*,#101771,.T.); +#101771 = EDGE_CURVE('',#101764,#101669,#101772,.T.); +#101772 = LINE('',#101773,#101774); +#101773 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101774 = VECTOR('',#101775,1.); +#101775 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#101776 = PLANE('',#101777); +#101777 = AXIS2_PLACEMENT_3D('',#101778,#101779,#101780); +#101778 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101779 = DIRECTION('',(0.,0.,1.)); +#101780 = DIRECTION('',(0.889616464678,0.456708381546,-0.)); +#101781 = ADVANCED_FACE('',(#101782),#101799,.F.); +#101782 = FACE_BOUND('',#101783,.F.); +#101783 = EDGE_LOOP('',(#101784,#101785,#101792,#101798)); +#101784 = ORIENTED_EDGE('',*,*,#101723,.T.); +#101785 = ORIENTED_EDGE('',*,*,#101786,.T.); +#101786 = EDGE_CURVE('',#101724,#101787,#101789,.T.); +#101787 = VERTEX_POINT('',#101788); +#101788 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101790,#101791), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101790 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101791 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101792 = ORIENTED_EDGE('',*,*,#101793,.F.); +#101793 = EDGE_CURVE('',#101679,#101787,#101794,.T.); +#101794 = LINE('',#101795,#101796); +#101795 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101796 = VECTOR('',#101797,1.); +#101797 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#101798 = ORIENTED_EDGE('',*,*,#101678,.F.); +#101799 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101800,#101801) + ,(#101802,#101803 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#101800 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101801 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101802 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101803 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101804 = ADVANCED_FACE('',(#101805),#101829,.F.); +#101805 = FACE_BOUND('',#101806,.F.); +#101806 = EDGE_LOOP('',(#101807,#101814,#101815,#101823)); +#101807 = ORIENTED_EDGE('',*,*,#101808,.F.); +#101808 = EDGE_CURVE('',#101702,#101809,#101811,.T.); +#101809 = VERTEX_POINT('',#101810); +#101810 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101811 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101812,#101813), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101812 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101813 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101814 = ORIENTED_EDGE('',*,*,#101701,.T.); +#101815 = ORIENTED_EDGE('',*,*,#101816,.T.); +#101816 = EDGE_CURVE('',#101694,#101817,#101819,.T.); +#101817 = VERTEX_POINT('',#101818); +#101818 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#101819 = LINE('',#101820,#101821); +#101820 = CARTESIAN_POINT('',(-1.375,-0.325,0.579830288983)); +#101821 = VECTOR('',#101822,1.); +#101822 = DIRECTION('',(0.,0.,1.)); +#101823 = ORIENTED_EDGE('',*,*,#101824,.F.); +#101824 = EDGE_CURVE('',#101809,#101817,#101825,.T.); +#101825 = LINE('',#101826,#101827); +#101826 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101827 = VECTOR('',#101828,1.); +#101828 = DIRECTION('',(0.,1.,0.)); +#101829 = PLANE('',#101830); +#101830 = AXIS2_PLACEMENT_3D('',#101831,#101832,#101833); +#101831 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101832 = DIRECTION('',(1.,0.,0.)); +#101833 = DIRECTION('',(-0.,1.,0.)); +#101834 = ADVANCED_FACE('',(#101835),#101862,.F.); +#101835 = FACE_BOUND('',#101836,.F.); +#101836 = EDGE_LOOP('',(#101837,#101838,#101847,#101855)); +#101837 = ORIENTED_EDGE('',*,*,#101693,.T.); +#101838 = ORIENTED_EDGE('',*,*,#101839,.T.); +#101839 = EDGE_CURVE('',#101686,#101840,#101842,.T.); +#101840 = VERTEX_POINT('',#101841); +#101841 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#101842 = CIRCLE('',#101843,0.12); +#101843 = AXIS2_PLACEMENT_3D('',#101844,#101845,#101846); +#101844 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#101845 = DIRECTION('',(-1.110223024625E-16,-1.,-1.003534056487E-47)); +#101846 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#101847 = ORIENTED_EDGE('',*,*,#101848,.F.); +#101848 = EDGE_CURVE('',#101849,#101840,#101851,.T.); +#101849 = VERTEX_POINT('',#101850); +#101850 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#101851 = LINE('',#101852,#101853); +#101852 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#101853 = VECTOR('',#101854,1.); +#101854 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#101855 = ORIENTED_EDGE('',*,*,#101856,.F.); +#101856 = EDGE_CURVE('',#101694,#101849,#101857,.T.); +#101857 = CIRCLE('',#101858,0.12); +#101858 = AXIS2_PLACEMENT_3D('',#101859,#101860,#101861); +#101859 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#101860 = DIRECTION('',(-1.110223024625E-16,-1.,-1.003534056487E-47)); +#101861 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#101862 = CYLINDRICAL_SURFACE('',#101863,0.12); +#101863 = AXIS2_PLACEMENT_3D('',#101864,#101865,#101866); +#101864 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#101865 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#101866 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#101867 = ADVANCED_FACE('',(#101868),#101892,.F.); +#101868 = FACE_BOUND('',#101869,.F.); +#101869 = EDGE_LOOP('',(#101870,#101878,#101879,#101886)); +#101870 = ORIENTED_EDGE('',*,*,#101871,.F.); +#101871 = EDGE_CURVE('',#101686,#101872,#101874,.T.); +#101872 = VERTEX_POINT('',#101873); +#101873 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#101874 = LINE('',#101875,#101876); +#101875 = CARTESIAN_POINT('',(-1.375,0.325,0.579830288983)); +#101876 = VECTOR('',#101877,1.); +#101877 = DIRECTION('',(0.,0.,1.)); +#101878 = ORIENTED_EDGE('',*,*,#101685,.T.); +#101879 = ORIENTED_EDGE('',*,*,#101880,.T.); +#101880 = EDGE_CURVE('',#101679,#101881,#101883,.T.); +#101881 = VERTEX_POINT('',#101882); +#101882 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#101883 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101884,#101885), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101884 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101885 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#101886 = ORIENTED_EDGE('',*,*,#101887,.F.); +#101887 = EDGE_CURVE('',#101872,#101881,#101888,.T.); +#101888 = LINE('',#101889,#101890); +#101889 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101890 = VECTOR('',#101891,1.); +#101891 = DIRECTION('',(0.,1.,0.)); +#101892 = PLANE('',#101893); +#101893 = AXIS2_PLACEMENT_3D('',#101894,#101895,#101896); +#101894 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101895 = DIRECTION('',(1.,0.,0.)); +#101896 = DIRECTION('',(-0.,1.,0.)); +#101897 = ADVANCED_FACE('',(#101898),#101915,.F.); +#101898 = FACE_BOUND('',#101899,.F.); +#101899 = EDGE_LOOP('',(#101900,#101901,#101902,#101910)); +#101900 = ORIENTED_EDGE('',*,*,#101771,.T.); +#101901 = ORIENTED_EDGE('',*,*,#101709,.T.); +#101902 = ORIENTED_EDGE('',*,*,#101903,.F.); +#101903 = EDGE_CURVE('',#101904,#101702,#101906,.T.); +#101904 = VERTEX_POINT('',#101905); +#101905 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101906 = LINE('',#101907,#101908); +#101907 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101908 = VECTOR('',#101909,1.); +#101909 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#101910 = ORIENTED_EDGE('',*,*,#101911,.F.); +#101911 = EDGE_CURVE('',#101764,#101904,#101912,.T.); +#101912 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101913,#101914), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101913 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101914 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101915 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101916,#101917) + ,(#101918,#101919 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#101916 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101917 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101918 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101919 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101920 = ADVANCED_FACE('',(#101921),#101938,.F.); +#101921 = FACE_BOUND('',#101922,.F.); +#101922 = EDGE_LOOP('',(#101923,#101924,#101925,#101933)); +#101923 = ORIENTED_EDGE('',*,*,#101763,.T.); +#101924 = ORIENTED_EDGE('',*,*,#101911,.T.); +#101925 = ORIENTED_EDGE('',*,*,#101926,.F.); +#101926 = EDGE_CURVE('',#101927,#101904,#101929,.T.); +#101927 = VERTEX_POINT('',#101928); +#101928 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101929 = LINE('',#101930,#101931); +#101930 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101931 = VECTOR('',#101932,1.); +#101932 = DIRECTION('',(-1.,0.,0.)); +#101933 = ORIENTED_EDGE('',*,*,#101934,.F.); +#101934 = EDGE_CURVE('',#101756,#101927,#101935,.T.); +#101935 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101936,#101937), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101936 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101937 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101938 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101939,#101940) + ,(#101941,#101942 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101939 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101940 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101941 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101942 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101943 = ADVANCED_FACE('',(#101944),#101961,.F.); +#101944 = FACE_BOUND('',#101945,.F.); +#101945 = EDGE_LOOP('',(#101946,#101947,#101954,#101960)); +#101946 = ORIENTED_EDGE('',*,*,#101731,.T.); +#101947 = ORIENTED_EDGE('',*,*,#101948,.T.); +#101948 = EDGE_CURVE('',#101732,#101949,#101951,.T.); +#101949 = VERTEX_POINT('',#101950); +#101950 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#101951 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101952,#101953), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101952 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101953 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#101954 = ORIENTED_EDGE('',*,*,#101955,.F.); +#101955 = EDGE_CURVE('',#101787,#101949,#101956,.T.); +#101956 = LINE('',#101957,#101958); +#101957 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101958 = VECTOR('',#101959,1.); +#101959 = DIRECTION('',(1.,0.,0.)); +#101960 = ORIENTED_EDGE('',*,*,#101786,.F.); +#101961 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101962,#101963) + ,(#101964,#101965 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101962 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101963 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101964 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101965 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#101966 = ADVANCED_FACE('',(#101967),#101984,.F.); +#101967 = FACE_BOUND('',#101968,.F.); +#101968 = EDGE_LOOP('',(#101969,#101970,#101971,#101979)); +#101969 = ORIENTED_EDGE('',*,*,#101755,.T.); +#101970 = ORIENTED_EDGE('',*,*,#101934,.T.); +#101971 = ORIENTED_EDGE('',*,*,#101972,.F.); +#101972 = EDGE_CURVE('',#101973,#101927,#101975,.T.); +#101973 = VERTEX_POINT('',#101974); +#101974 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101975 = LINE('',#101976,#101977); +#101976 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101977 = VECTOR('',#101978,1.); +#101978 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#101979 = ORIENTED_EDGE('',*,*,#101980,.F.); +#101980 = EDGE_CURVE('',#101748,#101973,#101981,.T.); +#101981 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101982,#101983), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101982 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101983 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101984 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101985,#101986) + ,(#101987,#101988 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#101985 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101986 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101987 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101988 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101989 = ADVANCED_FACE('',(#101990),#102007,.F.); +#101990 = FACE_BOUND('',#101991,.F.); +#101991 = EDGE_LOOP('',(#101992,#101993,#102000,#102006)); +#101992 = ORIENTED_EDGE('',*,*,#101739,.T.); +#101993 = ORIENTED_EDGE('',*,*,#101994,.T.); +#101994 = EDGE_CURVE('',#101740,#101995,#101997,.T.); +#101995 = VERTEX_POINT('',#101996); +#101996 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#101997 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101998,#101999), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101998 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#101999 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102000 = ORIENTED_EDGE('',*,*,#102001,.F.); +#102001 = EDGE_CURVE('',#101949,#101995,#102002,.T.); +#102002 = LINE('',#102003,#102004); +#102003 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#102004 = VECTOR('',#102005,1.); +#102005 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102006 = ORIENTED_EDGE('',*,*,#101948,.F.); +#102007 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102008,#102009) + ,(#102010,#102011 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102008 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#102009 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#102010 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#102011 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102012 = ADVANCED_FACE('',(#102013),#102040,.F.); +#102013 = FACE_BOUND('',#102014,.F.); +#102014 = EDGE_LOOP('',(#102015,#102016,#102017,#102025,#102033,#102039) + ); +#102015 = ORIENTED_EDGE('',*,*,#101747,.T.); +#102016 = ORIENTED_EDGE('',*,*,#101980,.T.); +#102017 = ORIENTED_EDGE('',*,*,#102018,.F.); +#102018 = EDGE_CURVE('',#102019,#101973,#102021,.T.); +#102019 = VERTEX_POINT('',#102020); +#102020 = CARTESIAN_POINT('',(1.375,-0.325,0.575)); +#102021 = LINE('',#102022,#102023); +#102022 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102023 = VECTOR('',#102024,1.); +#102024 = DIRECTION('',(0.,-1.,0.)); +#102025 = ORIENTED_EDGE('',*,*,#102026,.F.); +#102026 = EDGE_CURVE('',#102027,#102019,#102029,.T.); +#102027 = VERTEX_POINT('',#102028); +#102028 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#102029 = LINE('',#102030,#102031); +#102030 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#102031 = VECTOR('',#102032,1.); +#102032 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102033 = ORIENTED_EDGE('',*,*,#102034,.F.); +#102034 = EDGE_CURVE('',#101995,#102027,#102035,.T.); +#102035 = LINE('',#102036,#102037); +#102036 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102037 = VECTOR('',#102038,1.); +#102038 = DIRECTION('',(0.,-1.,0.)); +#102039 = ORIENTED_EDGE('',*,*,#101994,.F.); +#102040 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102041,#102042) + ,(#102043,#102044 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102041 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#102042 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102043 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#102044 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#102045 = ADVANCED_FACE('',(#102046),#102063,.F.); +#102046 = FACE_BOUND('',#102047,.F.); +#102047 = EDGE_LOOP('',(#102048,#102049,#102056,#102062)); +#102048 = ORIENTED_EDGE('',*,*,#101793,.T.); +#102049 = ORIENTED_EDGE('',*,*,#102050,.T.); +#102050 = EDGE_CURVE('',#101787,#102051,#102053,.T.); +#102051 = VERTEX_POINT('',#102052); +#102052 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102053 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102054,#102055), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102054 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#102055 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102056 = ORIENTED_EDGE('',*,*,#102057,.F.); +#102057 = EDGE_CURVE('',#101881,#102051,#102058,.T.); +#102058 = LINE('',#102059,#102060); +#102059 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#102060 = VECTOR('',#102061,1.); +#102061 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102062 = ORIENTED_EDGE('',*,*,#101880,.F.); +#102063 = PLANE('',#102064); +#102064 = AXIS2_PLACEMENT_3D('',#102065,#102066,#102067); +#102065 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#102066 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102067 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102068 = ADVANCED_FACE('',(#102069),#102086,.F.); +#102069 = FACE_BOUND('',#102070,.F.); +#102070 = EDGE_LOOP('',(#102071,#102072,#102073,#102081)); +#102071 = ORIENTED_EDGE('',*,*,#101903,.T.); +#102072 = ORIENTED_EDGE('',*,*,#101808,.T.); +#102073 = ORIENTED_EDGE('',*,*,#102074,.F.); +#102074 = EDGE_CURVE('',#102075,#101809,#102077,.T.); +#102075 = VERTEX_POINT('',#102076); +#102076 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102077 = LINE('',#102078,#102079); +#102078 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102079 = VECTOR('',#102080,1.); +#102080 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102081 = ORIENTED_EDGE('',*,*,#102082,.F.); +#102082 = EDGE_CURVE('',#101904,#102075,#102083,.T.); +#102083 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102084,#102085), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102084 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#102085 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102086 = PLANE('',#102087); +#102087 = AXIS2_PLACEMENT_3D('',#102088,#102089,#102090); +#102088 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102089 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102090 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102091 = ADVANCED_FACE('',(#102092),#102174,.F.); +#102092 = FACE_BOUND('',#102093,.F.); +#102093 = EDGE_LOOP('',(#102094,#102095,#102096,#102104,#102112,#102120, + #102128,#102136,#102144,#102152,#102160,#102168)); +#102094 = ORIENTED_EDGE('',*,*,#102074,.T.); +#102095 = ORIENTED_EDGE('',*,*,#101824,.T.); +#102096 = ORIENTED_EDGE('',*,*,#102097,.T.); +#102097 = EDGE_CURVE('',#101817,#102098,#102100,.T.); +#102098 = VERTEX_POINT('',#102099); +#102099 = CARTESIAN_POINT('',(-1.35,-0.325,0.775)); +#102100 = LINE('',#102101,#102102); +#102101 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#102102 = VECTOR('',#102103,1.); +#102103 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102104 = ORIENTED_EDGE('',*,*,#102105,.F.); +#102105 = EDGE_CURVE('',#102106,#102098,#102108,.T.); +#102106 = VERTEX_POINT('',#102107); +#102107 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102108 = LINE('',#102109,#102110); +#102109 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102110 = VECTOR('',#102111,1.); +#102111 = DIRECTION('',(0.,1.,0.)); +#102112 = ORIENTED_EDGE('',*,*,#102113,.F.); +#102113 = EDGE_CURVE('',#102114,#102106,#102116,.T.); +#102114 = VERTEX_POINT('',#102115); +#102115 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102116 = LINE('',#102117,#102118); +#102117 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102118 = VECTOR('',#102119,1.); +#102119 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102120 = ORIENTED_EDGE('',*,*,#102121,.F.); +#102121 = EDGE_CURVE('',#102122,#102114,#102124,.T.); +#102122 = VERTEX_POINT('',#102123); +#102123 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102124 = LINE('',#102125,#102126); +#102125 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102126 = VECTOR('',#102127,1.); +#102127 = DIRECTION('',(-1.,0.,0.)); +#102128 = ORIENTED_EDGE('',*,*,#102129,.F.); +#102129 = EDGE_CURVE('',#102130,#102122,#102132,.T.); +#102130 = VERTEX_POINT('',#102131); +#102131 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102132 = LINE('',#102133,#102134); +#102133 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102134 = VECTOR('',#102135,1.); +#102135 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102136 = ORIENTED_EDGE('',*,*,#102137,.F.); +#102137 = EDGE_CURVE('',#102138,#102130,#102140,.T.); +#102138 = VERTEX_POINT('',#102139); +#102139 = CARTESIAN_POINT('',(1.35,-0.325,0.775)); +#102140 = LINE('',#102141,#102142); +#102141 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102142 = VECTOR('',#102143,1.); +#102143 = DIRECTION('',(0.,-1.,0.)); +#102144 = ORIENTED_EDGE('',*,*,#102145,.F.); +#102145 = EDGE_CURVE('',#102146,#102138,#102148,.T.); +#102146 = VERTEX_POINT('',#102147); +#102147 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#102148 = LINE('',#102149,#102150); +#102149 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#102150 = VECTOR('',#102151,1.); +#102151 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102152 = ORIENTED_EDGE('',*,*,#102153,.T.); +#102153 = EDGE_CURVE('',#102146,#102154,#102156,.T.); +#102154 = VERTEX_POINT('',#102155); +#102155 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102156 = LINE('',#102157,#102158); +#102157 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102158 = VECTOR('',#102159,1.); +#102159 = DIRECTION('',(0.,-1.,0.)); +#102160 = ORIENTED_EDGE('',*,*,#102161,.T.); +#102161 = EDGE_CURVE('',#102154,#102162,#102164,.T.); +#102162 = VERTEX_POINT('',#102163); +#102163 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102164 = LINE('',#102165,#102166); +#102165 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102166 = VECTOR('',#102167,1.); +#102167 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102168 = ORIENTED_EDGE('',*,*,#102169,.T.); +#102169 = EDGE_CURVE('',#102162,#102075,#102170,.T.); +#102170 = LINE('',#102171,#102172); +#102171 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102172 = VECTOR('',#102173,1.); +#102173 = DIRECTION('',(-1.,0.,0.)); +#102174 = PLANE('',#102175); +#102175 = AXIS2_PLACEMENT_3D('',#102176,#102177,#102178); +#102176 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#102177 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#102178 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#102179 = ADVANCED_FACE('',(#102180),#102249,.F.); +#102180 = FACE_BOUND('',#102181,.F.); +#102181 = EDGE_LOOP('',(#102182,#102183,#102184,#102192,#102201,#102209, + #102217,#102225,#102234,#102242)); +#102182 = ORIENTED_EDGE('',*,*,#101816,.F.); +#102183 = ORIENTED_EDGE('',*,*,#101856,.T.); +#102184 = ORIENTED_EDGE('',*,*,#102185,.T.); +#102185 = EDGE_CURVE('',#101849,#102186,#102188,.T.); +#102186 = VERTEX_POINT('',#102187); +#102187 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#102188 = LINE('',#102189,#102190); +#102189 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#102190 = VECTOR('',#102191,1.); +#102191 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#102192 = ORIENTED_EDGE('',*,*,#102193,.T.); +#102193 = EDGE_CURVE('',#102186,#102194,#102196,.T.); +#102194 = VERTEX_POINT('',#102195); +#102195 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102196 = CIRCLE('',#102197,0.32); +#102197 = AXIS2_PLACEMENT_3D('',#102198,#102199,#102200); +#102198 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102199 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102200 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#102201 = ORIENTED_EDGE('',*,*,#102202,.T.); +#102202 = EDGE_CURVE('',#102194,#102203,#102205,.T.); +#102203 = VERTEX_POINT('',#102204); +#102204 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102205 = LINE('',#102206,#102207); +#102206 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102207 = VECTOR('',#102208,1.); +#102208 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#102209 = ORIENTED_EDGE('',*,*,#102210,.T.); +#102210 = EDGE_CURVE('',#102203,#102211,#102213,.T.); +#102211 = VERTEX_POINT('',#102212); +#102212 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102213 = LINE('',#102214,#102215); +#102214 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102215 = VECTOR('',#102216,1.); +#102216 = DIRECTION('',(0.,0.,1.)); +#102217 = ORIENTED_EDGE('',*,*,#102218,.T.); +#102218 = EDGE_CURVE('',#102211,#102219,#102221,.T.); +#102219 = VERTEX_POINT('',#102220); +#102220 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#102221 = LINE('',#102222,#102223); +#102222 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102223 = VECTOR('',#102224,1.); +#102224 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102225 = ORIENTED_EDGE('',*,*,#102226,.T.); +#102226 = EDGE_CURVE('',#102219,#102227,#102229,.T.); +#102227 = VERTEX_POINT('',#102228); +#102228 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102229 = CIRCLE('',#102230,0.12); +#102230 = AXIS2_PLACEMENT_3D('',#102231,#102232,#102233); +#102231 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102232 = DIRECTION('',(-1.110223024625E-16,-1.,2.0070681136E-47)); +#102233 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#102234 = ORIENTED_EDGE('',*,*,#102235,.T.); +#102235 = EDGE_CURVE('',#102227,#102236,#102238,.T.); +#102236 = VERTEX_POINT('',#102237); +#102237 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#102238 = LINE('',#102239,#102240); +#102239 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102240 = VECTOR('',#102241,1.); +#102241 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#102242 = ORIENTED_EDGE('',*,*,#102243,.T.); +#102243 = EDGE_CURVE('',#102236,#101817,#102244,.T.); +#102244 = CIRCLE('',#102245,0.32); +#102245 = AXIS2_PLACEMENT_3D('',#102246,#102247,#102248); +#102246 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#102247 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102248 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#102249 = PLANE('',#102250); +#102250 = AXIS2_PLACEMENT_3D('',#102251,#102252,#102253); +#102251 = CARTESIAN_POINT('',(-1.610729118287,-0.325,0.384660577966)); +#102252 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102253 = DIRECTION('',(0.,-0.,1.)); +#102254 = ADVANCED_FACE('',(#102255),#102273,.F.); +#102255 = FACE_BOUND('',#102256,.F.); +#102256 = EDGE_LOOP('',(#102257,#102258,#102266,#102272)); +#102257 = ORIENTED_EDGE('',*,*,#101848,.T.); +#102258 = ORIENTED_EDGE('',*,*,#102259,.T.); +#102259 = EDGE_CURVE('',#101840,#102260,#102262,.T.); +#102260 = VERTEX_POINT('',#102261); +#102261 = CARTESIAN_POINT('',(-1.523665661432,0.325,0.264432583147)); +#102262 = LINE('',#102263,#102264); +#102263 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#102264 = VECTOR('',#102265,1.); +#102265 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#102266 = ORIENTED_EDGE('',*,*,#102267,.F.); +#102267 = EDGE_CURVE('',#102186,#102260,#102268,.T.); +#102268 = LINE('',#102269,#102270); +#102269 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#102270 = VECTOR('',#102271,1.); +#102271 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102272 = ORIENTED_EDGE('',*,*,#102185,.F.); +#102273 = PLANE('',#102274); +#102274 = AXIS2_PLACEMENT_3D('',#102275,#102276,#102277); +#102275 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#102276 = DIRECTION('',(-0.989759848633,1.098854172802E-16, + 0.142742572604)); +#102277 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#102278 = ADVANCED_FACE('',(#102279),#102341,.T.); +#102279 = FACE_BOUND('',#102280,.T.); +#102280 = EDGE_LOOP('',(#102281,#102282,#102283,#102284,#102293,#102301, + #102309,#102317,#102326,#102334)); +#102281 = ORIENTED_EDGE('',*,*,#101871,.F.); +#102282 = ORIENTED_EDGE('',*,*,#101839,.T.); +#102283 = ORIENTED_EDGE('',*,*,#102259,.T.); +#102284 = ORIENTED_EDGE('',*,*,#102285,.T.); +#102285 = EDGE_CURVE('',#102260,#102286,#102288,.T.); +#102286 = VERTEX_POINT('',#102287); +#102287 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17) + ); +#102288 = CIRCLE('',#102289,0.32); +#102289 = AXIS2_PLACEMENT_3D('',#102290,#102291,#102292); +#102290 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#102291 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102292 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#102293 = ORIENTED_EDGE('',*,*,#102294,.T.); +#102294 = EDGE_CURVE('',#102286,#102295,#102297,.T.); +#102295 = VERTEX_POINT('',#102296); +#102296 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#102297 = LINE('',#102298,#102299); +#102298 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17) + ); +#102299 = VECTOR('',#102300,1.); +#102300 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#102301 = ORIENTED_EDGE('',*,*,#102302,.T.); +#102302 = EDGE_CURVE('',#102295,#102303,#102305,.T.); +#102303 = VERTEX_POINT('',#102304); +#102304 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#102305 = LINE('',#102306,#102307); +#102306 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#102307 = VECTOR('',#102308,1.); +#102308 = DIRECTION('',(0.,0.,1.)); +#102309 = ORIENTED_EDGE('',*,*,#102310,.T.); +#102310 = EDGE_CURVE('',#102303,#102311,#102313,.T.); +#102311 = VERTEX_POINT('',#102312); +#102312 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.2)); +#102313 = LINE('',#102314,#102315); +#102314 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#102315 = VECTOR('',#102316,1.); +#102316 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102317 = ORIENTED_EDGE('',*,*,#102318,.T.); +#102318 = EDGE_CURVE('',#102311,#102319,#102321,.T.); +#102319 = VERTEX_POINT('',#102320); +#102320 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#102321 = CIRCLE('',#102322,0.12); +#102322 = AXIS2_PLACEMENT_3D('',#102323,#102324,#102325); +#102323 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#102324 = DIRECTION('',(-1.110223024625E-16,-1.,2.0070681136E-47)); +#102325 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#102326 = ORIENTED_EDGE('',*,*,#102327,.T.); +#102327 = EDGE_CURVE('',#102319,#102328,#102330,.T.); +#102328 = VERTEX_POINT('',#102329); +#102329 = CARTESIAN_POINT('',(-1.690138480964,0.325,0.510567416853)); +#102330 = LINE('',#102331,#102332); +#102331 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#102332 = VECTOR('',#102333,1.); +#102333 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#102334 = ORIENTED_EDGE('',*,*,#102335,.T.); +#102335 = EDGE_CURVE('',#102328,#101872,#102336,.T.); +#102336 = CIRCLE('',#102337,0.32); +#102337 = AXIS2_PLACEMENT_3D('',#102338,#102339,#102340); +#102338 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#102339 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102340 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#102341 = PLANE('',#102342); +#102342 = AXIS2_PLACEMENT_3D('',#102343,#102344,#102345); +#102343 = CARTESIAN_POINT('',(-1.610729118287,0.325,0.384660577966)); +#102344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102345 = DIRECTION('',(0.,-0.,1.)); +#102346 = ADVANCED_FACE('',(#102347),#102429,.F.); +#102347 = FACE_BOUND('',#102348,.F.); +#102348 = EDGE_LOOP('',(#102349,#102357,#102358,#102359,#102367,#102375, + #102383,#102391,#102399,#102407,#102415,#102423)); +#102349 = ORIENTED_EDGE('',*,*,#102350,.F.); +#102350 = EDGE_CURVE('',#101872,#102351,#102353,.T.); +#102351 = VERTEX_POINT('',#102352); +#102352 = CARTESIAN_POINT('',(-1.35,0.325,0.775)); +#102353 = LINE('',#102354,#102355); +#102354 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#102355 = VECTOR('',#102356,1.); +#102356 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102357 = ORIENTED_EDGE('',*,*,#101887,.T.); +#102358 = ORIENTED_EDGE('',*,*,#102057,.T.); +#102359 = ORIENTED_EDGE('',*,*,#102360,.T.); +#102360 = EDGE_CURVE('',#102051,#102361,#102363,.T.); +#102361 = VERTEX_POINT('',#102362); +#102362 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102363 = LINE('',#102364,#102365); +#102364 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102365 = VECTOR('',#102366,1.); +#102366 = DIRECTION('',(1.,0.,0.)); +#102367 = ORIENTED_EDGE('',*,*,#102368,.T.); +#102368 = EDGE_CURVE('',#102361,#102369,#102371,.T.); +#102369 = VERTEX_POINT('',#102370); +#102370 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102371 = LINE('',#102372,#102373); +#102372 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102373 = VECTOR('',#102374,1.); +#102374 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102375 = ORIENTED_EDGE('',*,*,#102376,.T.); +#102376 = EDGE_CURVE('',#102369,#102377,#102379,.T.); +#102377 = VERTEX_POINT('',#102378); +#102378 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102379 = LINE('',#102380,#102381); +#102380 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102381 = VECTOR('',#102382,1.); +#102382 = DIRECTION('',(0.,-1.,0.)); +#102383 = ORIENTED_EDGE('',*,*,#102384,.T.); +#102384 = EDGE_CURVE('',#102377,#102385,#102387,.T.); +#102385 = VERTEX_POINT('',#102386); +#102386 = CARTESIAN_POINT('',(1.35,0.325,0.775)); +#102387 = LINE('',#102388,#102389); +#102388 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102389 = VECTOR('',#102390,1.); +#102390 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102391 = ORIENTED_EDGE('',*,*,#102392,.F.); +#102392 = EDGE_CURVE('',#102393,#102385,#102395,.T.); +#102393 = VERTEX_POINT('',#102394); +#102394 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102395 = LINE('',#102396,#102397); +#102396 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102397 = VECTOR('',#102398,1.); +#102398 = DIRECTION('',(0.,-1.,0.)); +#102399 = ORIENTED_EDGE('',*,*,#102400,.F.); +#102400 = EDGE_CURVE('',#102401,#102393,#102403,.T.); +#102401 = VERTEX_POINT('',#102402); +#102402 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102403 = LINE('',#102404,#102405); +#102404 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102405 = VECTOR('',#102406,1.); +#102406 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102407 = ORIENTED_EDGE('',*,*,#102408,.F.); +#102408 = EDGE_CURVE('',#102409,#102401,#102411,.T.); +#102409 = VERTEX_POINT('',#102410); +#102410 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102411 = LINE('',#102412,#102413); +#102412 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102413 = VECTOR('',#102414,1.); +#102414 = DIRECTION('',(1.,0.,0.)); +#102415 = ORIENTED_EDGE('',*,*,#102416,.F.); +#102416 = EDGE_CURVE('',#102417,#102409,#102419,.T.); +#102417 = VERTEX_POINT('',#102418); +#102418 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102419 = LINE('',#102420,#102421); +#102420 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102421 = VECTOR('',#102422,1.); +#102422 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102423 = ORIENTED_EDGE('',*,*,#102424,.F.); +#102424 = EDGE_CURVE('',#102351,#102417,#102425,.T.); +#102425 = LINE('',#102426,#102427); +#102426 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102427 = VECTOR('',#102428,1.); +#102428 = DIRECTION('',(0.,1.,0.)); +#102429 = PLANE('',#102430); +#102430 = AXIS2_PLACEMENT_3D('',#102431,#102432,#102433); +#102431 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#102432 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#102433 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#102434 = ADVANCED_FACE('',(#102435),#102445,.F.); +#102435 = FACE_BOUND('',#102436,.F.); +#102436 = EDGE_LOOP('',(#102437,#102438,#102439,#102440)); +#102437 = ORIENTED_EDGE('',*,*,#101926,.T.); +#102438 = ORIENTED_EDGE('',*,*,#102082,.T.); +#102439 = ORIENTED_EDGE('',*,*,#102169,.F.); +#102440 = ORIENTED_EDGE('',*,*,#102441,.F.); +#102441 = EDGE_CURVE('',#101927,#102162,#102442,.T.); +#102442 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102443,#102444), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102443 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#102444 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102445 = PLANE('',#102446); +#102446 = AXIS2_PLACEMENT_3D('',#102447,#102448,#102449); +#102447 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102448 = DIRECTION('',(0.,1.,0.)); +#102449 = DIRECTION('',(-1.,0.,0.)); +#102450 = ADVANCED_FACE('',(#102451),#102461,.F.); +#102451 = FACE_BOUND('',#102452,.F.); +#102452 = EDGE_LOOP('',(#102453,#102454,#102459,#102460)); +#102453 = ORIENTED_EDGE('',*,*,#101955,.T.); +#102454 = ORIENTED_EDGE('',*,*,#102455,.T.); +#102455 = EDGE_CURVE('',#101949,#102361,#102456,.T.); +#102456 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102457,#102458), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102457 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#102458 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102459 = ORIENTED_EDGE('',*,*,#102360,.F.); +#102460 = ORIENTED_EDGE('',*,*,#102050,.F.); +#102461 = PLANE('',#102462); +#102462 = AXIS2_PLACEMENT_3D('',#102463,#102464,#102465); +#102463 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102464 = DIRECTION('',(0.,-1.,0.)); +#102465 = DIRECTION('',(1.,0.,0.)); +#102466 = ADVANCED_FACE('',(#102467),#102477,.F.); +#102467 = FACE_BOUND('',#102468,.F.); +#102468 = EDGE_LOOP('',(#102469,#102470,#102471,#102472)); +#102469 = ORIENTED_EDGE('',*,*,#101972,.T.); +#102470 = ORIENTED_EDGE('',*,*,#102441,.T.); +#102471 = ORIENTED_EDGE('',*,*,#102161,.F.); +#102472 = ORIENTED_EDGE('',*,*,#102473,.F.); +#102473 = EDGE_CURVE('',#101973,#102154,#102474,.T.); +#102474 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102475,#102476), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102475 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#102476 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102477 = PLANE('',#102478); +#102478 = AXIS2_PLACEMENT_3D('',#102479,#102480,#102481); +#102479 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102480 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102481 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102482 = ADVANCED_FACE('',(#102483),#102493,.F.); +#102483 = FACE_BOUND('',#102484,.F.); +#102484 = EDGE_LOOP('',(#102485,#102486,#102491,#102492)); +#102485 = ORIENTED_EDGE('',*,*,#102001,.T.); +#102486 = ORIENTED_EDGE('',*,*,#102487,.T.); +#102487 = EDGE_CURVE('',#101995,#102369,#102488,.T.); +#102488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102489,#102490), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102489 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102490 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102491 = ORIENTED_EDGE('',*,*,#102368,.F.); +#102492 = ORIENTED_EDGE('',*,*,#102455,.F.); +#102493 = PLANE('',#102494); +#102494 = AXIS2_PLACEMENT_3D('',#102495,#102496,#102497); +#102495 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102496 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102497 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102498 = ADVANCED_FACE('',(#102499),#102510,.F.); +#102499 = FACE_BOUND('',#102500,.F.); +#102500 = EDGE_LOOP('',(#102501,#102502,#102503,#102509)); +#102501 = ORIENTED_EDGE('',*,*,#102487,.F.); +#102502 = ORIENTED_EDGE('',*,*,#102034,.T.); +#102503 = ORIENTED_EDGE('',*,*,#102504,.T.); +#102504 = EDGE_CURVE('',#102027,#102377,#102505,.T.); +#102505 = LINE('',#102506,#102507); +#102506 = CARTESIAN_POINT('',(1.375,0.325,0.579830288983)); +#102507 = VECTOR('',#102508,1.); +#102508 = DIRECTION('',(0.,0.,1.)); +#102509 = ORIENTED_EDGE('',*,*,#102376,.F.); +#102510 = PLANE('',#102511); +#102511 = AXIS2_PLACEMENT_3D('',#102512,#102513,#102514); +#102512 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102513 = DIRECTION('',(-1.,0.,0.)); +#102514 = DIRECTION('',(0.,-1.,0.)); +#102515 = ADVANCED_FACE('',(#102516),#102543,.F.); +#102516 = FACE_BOUND('',#102517,.F.); +#102517 = EDGE_LOOP('',(#102518,#102519,#102528,#102536)); +#102518 = ORIENTED_EDGE('',*,*,#102026,.T.); +#102519 = ORIENTED_EDGE('',*,*,#102520,.T.); +#102520 = EDGE_CURVE('',#102019,#102521,#102523,.T.); +#102521 = VERTEX_POINT('',#102522); +#102522 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#102523 = CIRCLE('',#102524,0.12); +#102524 = AXIS2_PLACEMENT_3D('',#102525,#102526,#102527); +#102525 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#102526 = DIRECTION('',(2.22044604925E-16,1.,-2.007068112974E-47)); +#102527 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#102528 = ORIENTED_EDGE('',*,*,#102529,.F.); +#102529 = EDGE_CURVE('',#102530,#102521,#102532,.T.); +#102530 = VERTEX_POINT('',#102531); +#102531 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#102532 = LINE('',#102533,#102534); +#102533 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#102534 = VECTOR('',#102535,1.); +#102535 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102536 = ORIENTED_EDGE('',*,*,#102537,.F.); +#102537 = EDGE_CURVE('',#102027,#102530,#102538,.T.); +#102538 = CIRCLE('',#102539,0.12); +#102539 = AXIS2_PLACEMENT_3D('',#102540,#102541,#102542); +#102540 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#102541 = DIRECTION('',(2.22044604925E-16,1.,-2.007068112974E-47)); +#102542 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#102543 = CYLINDRICAL_SURFACE('',#102544,0.12); +#102544 = AXIS2_PLACEMENT_3D('',#102545,#102546,#102547); +#102545 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#102546 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#102547 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#102548 = ADVANCED_FACE('',(#102549),#102560,.F.); +#102549 = FACE_BOUND('',#102550,.F.); +#102550 = EDGE_LOOP('',(#102551,#102557,#102558,#102559)); +#102551 = ORIENTED_EDGE('',*,*,#102552,.F.); +#102552 = EDGE_CURVE('',#102019,#102146,#102553,.T.); +#102553 = LINE('',#102554,#102555); +#102554 = CARTESIAN_POINT('',(1.375,-0.325,0.579830288983)); +#102555 = VECTOR('',#102556,1.); +#102556 = DIRECTION('',(0.,0.,1.)); +#102557 = ORIENTED_EDGE('',*,*,#102018,.T.); +#102558 = ORIENTED_EDGE('',*,*,#102473,.T.); +#102559 = ORIENTED_EDGE('',*,*,#102153,.F.); +#102560 = PLANE('',#102561); +#102561 = AXIS2_PLACEMENT_3D('',#102562,#102563,#102564); +#102562 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102563 = DIRECTION('',(-1.,0.,0.)); +#102564 = DIRECTION('',(0.,-1.,0.)); +#102565 = ADVANCED_FACE('',(#102566),#102582,.F.); +#102566 = FACE_BOUND('',#102567,.F.); +#102567 = EDGE_LOOP('',(#102568,#102569,#102575,#102576)); +#102568 = ORIENTED_EDGE('',*,*,#102384,.F.); +#102569 = ORIENTED_EDGE('',*,*,#102570,.T.); +#102570 = EDGE_CURVE('',#102377,#102146,#102571,.T.); +#102571 = LINE('',#102572,#102573); +#102572 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102573 = VECTOR('',#102574,1.); +#102574 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102575 = ORIENTED_EDGE('',*,*,#102145,.T.); +#102576 = ORIENTED_EDGE('',*,*,#102577,.F.); +#102577 = EDGE_CURVE('',#102385,#102138,#102578,.T.); +#102578 = LINE('',#102579,#102580); +#102579 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102580 = VECTOR('',#102581,1.); +#102581 = DIRECTION('',(0.,-1.,0.)); +#102582 = PLANE('',#102583); +#102583 = AXIS2_PLACEMENT_3D('',#102584,#102585,#102586); +#102584 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102585 = DIRECTION('',(0.,0.,-1.)); +#102586 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102587 = ADVANCED_FACE('',(#102588),#102613,.F.); +#102588 = FACE_BOUND('',#102589,.F.); +#102589 = EDGE_LOOP('',(#102590,#102591,#102592,#102593,#102600,#102608) + ); +#102590 = ORIENTED_EDGE('',*,*,#102392,.T.); +#102591 = ORIENTED_EDGE('',*,*,#102577,.T.); +#102592 = ORIENTED_EDGE('',*,*,#102137,.T.); +#102593 = ORIENTED_EDGE('',*,*,#102594,.T.); +#102594 = EDGE_CURVE('',#102130,#102595,#102597,.T.); +#102595 = VERTEX_POINT('',#102596); +#102596 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102597 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102598,#102599), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102598 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102599 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102600 = ORIENTED_EDGE('',*,*,#102601,.F.); +#102601 = EDGE_CURVE('',#102602,#102595,#102604,.T.); +#102602 = VERTEX_POINT('',#102603); +#102603 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102604 = LINE('',#102605,#102606); +#102605 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102606 = VECTOR('',#102607,1.); +#102607 = DIRECTION('',(0.,-1.,0.)); +#102608 = ORIENTED_EDGE('',*,*,#102609,.F.); +#102609 = EDGE_CURVE('',#102393,#102602,#102610,.T.); +#102610 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102611,#102612), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102611 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102612 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102613 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102614,#102615) + ,(#102616,#102617 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102614 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102615 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102616 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102617 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102618 = ADVANCED_FACE('',(#102619),#102636,.F.); +#102619 = FACE_BOUND('',#102620,.F.); +#102620 = EDGE_LOOP('',(#102621,#102622,#102629,#102635)); +#102621 = ORIENTED_EDGE('',*,*,#102129,.T.); +#102622 = ORIENTED_EDGE('',*,*,#102623,.T.); +#102623 = EDGE_CURVE('',#102122,#102624,#102626,.T.); +#102624 = VERTEX_POINT('',#102625); +#102625 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102626 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102627,#102628), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102627 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102628 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102629 = ORIENTED_EDGE('',*,*,#102630,.F.); +#102630 = EDGE_CURVE('',#102595,#102624,#102631,.T.); +#102631 = LINE('',#102632,#102633); +#102632 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102633 = VECTOR('',#102634,1.); +#102634 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102635 = ORIENTED_EDGE('',*,*,#102594,.F.); +#102636 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102637,#102638) + ,(#102639,#102640 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102637 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102638 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102639 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102640 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102641 = ADVANCED_FACE('',(#102642),#102659,.F.); +#102642 = FACE_BOUND('',#102643,.F.); +#102643 = EDGE_LOOP('',(#102644,#102645,#102652,#102658)); +#102644 = ORIENTED_EDGE('',*,*,#102121,.T.); +#102645 = ORIENTED_EDGE('',*,*,#102646,.T.); +#102646 = EDGE_CURVE('',#102114,#102647,#102649,.T.); +#102647 = VERTEX_POINT('',#102648); +#102648 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102649 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102650,#102651), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102650 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102651 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102652 = ORIENTED_EDGE('',*,*,#102653,.F.); +#102653 = EDGE_CURVE('',#102624,#102647,#102654,.T.); +#102654 = LINE('',#102655,#102656); +#102655 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102656 = VECTOR('',#102657,1.); +#102657 = DIRECTION('',(-1.,0.,0.)); +#102658 = ORIENTED_EDGE('',*,*,#102623,.F.); +#102659 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102660,#102661) + ,(#102662,#102663 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102660 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102661 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102662 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102663 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102664 = ADVANCED_FACE('',(#102665),#102682,.F.); +#102665 = FACE_BOUND('',#102666,.F.); +#102666 = EDGE_LOOP('',(#102667,#102668,#102675,#102681)); +#102667 = ORIENTED_EDGE('',*,*,#102113,.T.); +#102668 = ORIENTED_EDGE('',*,*,#102669,.T.); +#102669 = EDGE_CURVE('',#102106,#102670,#102672,.T.); +#102670 = VERTEX_POINT('',#102671); +#102671 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102672 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102673,#102674), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102673 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102674 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102675 = ORIENTED_EDGE('',*,*,#102676,.F.); +#102676 = EDGE_CURVE('',#102647,#102670,#102677,.T.); +#102677 = LINE('',#102678,#102679); +#102678 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102679 = VECTOR('',#102680,1.); +#102680 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102681 = ORIENTED_EDGE('',*,*,#102646,.F.); +#102682 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102683,#102684) + ,(#102685,#102686 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102683 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102684 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102685 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102686 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102687 = ADVANCED_FACE('',(#102688),#102712,.F.); +#102688 = FACE_BOUND('',#102689,.F.); +#102689 = EDGE_LOOP('',(#102690,#102691,#102697,#102698,#102705,#102711) + ); +#102690 = ORIENTED_EDGE('',*,*,#102105,.T.); +#102691 = ORIENTED_EDGE('',*,*,#102692,.T.); +#102692 = EDGE_CURVE('',#102098,#102351,#102693,.T.); +#102693 = LINE('',#102694,#102695); +#102694 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102695 = VECTOR('',#102696,1.); +#102696 = DIRECTION('',(0.,1.,0.)); +#102697 = ORIENTED_EDGE('',*,*,#102424,.T.); +#102698 = ORIENTED_EDGE('',*,*,#102699,.T.); +#102699 = EDGE_CURVE('',#102417,#102700,#102702,.T.); +#102700 = VERTEX_POINT('',#102701); +#102701 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102702 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102703,#102704), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102703 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102704 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102705 = ORIENTED_EDGE('',*,*,#102706,.F.); +#102706 = EDGE_CURVE('',#102670,#102700,#102707,.T.); +#102707 = LINE('',#102708,#102709); +#102708 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102709 = VECTOR('',#102710,1.); +#102710 = DIRECTION('',(0.,1.,0.)); +#102711 = ORIENTED_EDGE('',*,*,#102669,.F.); +#102712 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102713,#102714) + ,(#102715,#102716 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102713 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102714 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102715 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102716 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102717 = ADVANCED_FACE('',(#102718),#102729,.F.); +#102718 = FACE_BOUND('',#102719,.F.); +#102719 = EDGE_LOOP('',(#102720,#102721,#102727,#102728)); +#102720 = ORIENTED_EDGE('',*,*,#102097,.F.); +#102721 = ORIENTED_EDGE('',*,*,#102722,.T.); +#102722 = EDGE_CURVE('',#101817,#101872,#102723,.T.); +#102723 = LINE('',#102724,#102725); +#102724 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#102725 = VECTOR('',#102726,1.); +#102726 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102727 = ORIENTED_EDGE('',*,*,#102350,.T.); +#102728 = ORIENTED_EDGE('',*,*,#102692,.F.); +#102729 = PLANE('',#102730); +#102730 = AXIS2_PLACEMENT_3D('',#102731,#102732,#102733); +#102731 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#102732 = DIRECTION('',(0.,0.,-1.)); +#102733 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102734 = ADVANCED_FACE('',(#102735),#102746,.T.); +#102735 = FACE_BOUND('',#102736,.T.); +#102736 = EDGE_LOOP('',(#102737,#102738,#102739,#102740)); +#102737 = ORIENTED_EDGE('',*,*,#102243,.T.); +#102738 = ORIENTED_EDGE('',*,*,#102722,.T.); +#102739 = ORIENTED_EDGE('',*,*,#102335,.F.); +#102740 = ORIENTED_EDGE('',*,*,#102741,.F.); +#102741 = EDGE_CURVE('',#102236,#102328,#102742,.T.); +#102742 = LINE('',#102743,#102744); +#102743 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#102744 = VECTOR('',#102745,1.); +#102745 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102746 = CYLINDRICAL_SURFACE('',#102747,0.32); +#102747 = AXIS2_PLACEMENT_3D('',#102748,#102749,#102750); +#102748 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#102749 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#102750 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#102751 = ADVANCED_FACE('',(#102752),#102763,.F.); +#102752 = FACE_BOUND('',#102753,.F.); +#102753 = EDGE_LOOP('',(#102754,#102760,#102761,#102762)); +#102754 = ORIENTED_EDGE('',*,*,#102755,.T.); +#102755 = EDGE_CURVE('',#102227,#102319,#102756,.T.); +#102756 = LINE('',#102757,#102758); +#102757 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102758 = VECTOR('',#102759,1.); +#102759 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102760 = ORIENTED_EDGE('',*,*,#102327,.T.); +#102761 = ORIENTED_EDGE('',*,*,#102741,.F.); +#102762 = ORIENTED_EDGE('',*,*,#102235,.F.); +#102763 = PLANE('',#102764); +#102764 = AXIS2_PLACEMENT_3D('',#102765,#102766,#102767); +#102765 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102766 = DIRECTION('',(0.989759848633,-1.098854172802E-16, + -0.142742572604)); +#102767 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#102768 = ADVANCED_FACE('',(#102769),#102780,.F.); +#102769 = FACE_BOUND('',#102770,.F.); +#102770 = EDGE_LOOP('',(#102771,#102777,#102778,#102779)); +#102771 = ORIENTED_EDGE('',*,*,#102772,.T.); +#102772 = EDGE_CURVE('',#102219,#102311,#102773,.T.); +#102773 = LINE('',#102774,#102775); +#102774 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#102775 = VECTOR('',#102776,1.); +#102776 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102777 = ORIENTED_EDGE('',*,*,#102318,.T.); +#102778 = ORIENTED_EDGE('',*,*,#102755,.F.); +#102779 = ORIENTED_EDGE('',*,*,#102226,.F.); +#102780 = CYLINDRICAL_SURFACE('',#102781,0.12); +#102781 = AXIS2_PLACEMENT_3D('',#102782,#102783,#102784); +#102782 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102783 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#102784 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#102785 = ADVANCED_FACE('',(#102786),#102797,.F.); +#102786 = FACE_BOUND('',#102787,.F.); +#102787 = EDGE_LOOP('',(#102788,#102794,#102795,#102796)); +#102788 = ORIENTED_EDGE('',*,*,#102789,.T.); +#102789 = EDGE_CURVE('',#102211,#102303,#102790,.T.); +#102790 = LINE('',#102791,#102792); +#102791 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102792 = VECTOR('',#102793,1.); +#102793 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102794 = ORIENTED_EDGE('',*,*,#102310,.T.); +#102795 = ORIENTED_EDGE('',*,*,#102772,.F.); +#102796 = ORIENTED_EDGE('',*,*,#102218,.F.); +#102797 = PLANE('',#102798); +#102798 = AXIS2_PLACEMENT_3D('',#102799,#102800,#102801); +#102799 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102800 = DIRECTION('',(0.,0.,-1.)); +#102801 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102802 = ADVANCED_FACE('',(#102803),#102814,.F.); +#102803 = FACE_BOUND('',#102804,.F.); +#102804 = EDGE_LOOP('',(#102805,#102811,#102812,#102813)); +#102805 = ORIENTED_EDGE('',*,*,#102806,.T.); +#102806 = EDGE_CURVE('',#102203,#102295,#102807,.T.); +#102807 = LINE('',#102808,#102809); +#102808 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102809 = VECTOR('',#102810,1.); +#102810 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102811 = ORIENTED_EDGE('',*,*,#102302,.T.); +#102812 = ORIENTED_EDGE('',*,*,#102789,.F.); +#102813 = ORIENTED_EDGE('',*,*,#102210,.F.); +#102814 = PLANE('',#102815); +#102815 = AXIS2_PLACEMENT_3D('',#102816,#102817,#102818); +#102816 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102817 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102818 = DIRECTION('',(0.,0.,1.)); +#102819 = ADVANCED_FACE('',(#102820),#102831,.F.); +#102820 = FACE_BOUND('',#102821,.F.); +#102821 = EDGE_LOOP('',(#102822,#102828,#102829,#102830)); +#102822 = ORIENTED_EDGE('',*,*,#102823,.T.); +#102823 = EDGE_CURVE('',#102194,#102286,#102824,.T.); +#102824 = LINE('',#102825,#102826); +#102825 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102826 = VECTOR('',#102827,1.); +#102827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102828 = ORIENTED_EDGE('',*,*,#102294,.T.); +#102829 = ORIENTED_EDGE('',*,*,#102806,.F.); +#102830 = ORIENTED_EDGE('',*,*,#102202,.F.); +#102831 = PLANE('',#102832); +#102832 = AXIS2_PLACEMENT_3D('',#102833,#102834,#102835); +#102833 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102834 = DIRECTION('',(0.,0.,1.)); +#102835 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#102836 = ADVANCED_FACE('',(#102837),#102843,.T.); +#102837 = FACE_BOUND('',#102838,.T.); +#102838 = EDGE_LOOP('',(#102839,#102840,#102841,#102842)); +#102839 = ORIENTED_EDGE('',*,*,#102193,.T.); +#102840 = ORIENTED_EDGE('',*,*,#102823,.T.); +#102841 = ORIENTED_EDGE('',*,*,#102285,.F.); +#102842 = ORIENTED_EDGE('',*,*,#102267,.F.); +#102843 = CYLINDRICAL_SURFACE('',#102844,0.32); +#102844 = AXIS2_PLACEMENT_3D('',#102845,#102846,#102847); +#102845 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102846 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#102847 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#102848 = ADVANCED_FACE('',(#102849),#102866,.F.); +#102849 = FACE_BOUND('',#102850,.F.); +#102850 = EDGE_LOOP('',(#102851,#102852,#102859,#102865)); +#102851 = ORIENTED_EDGE('',*,*,#102416,.T.); +#102852 = ORIENTED_EDGE('',*,*,#102853,.T.); +#102853 = EDGE_CURVE('',#102409,#102854,#102856,.T.); +#102854 = VERTEX_POINT('',#102855); +#102855 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102856 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102857,#102858), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102857 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102858 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102859 = ORIENTED_EDGE('',*,*,#102860,.F.); +#102860 = EDGE_CURVE('',#102700,#102854,#102861,.T.); +#102861 = LINE('',#102862,#102863); +#102862 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102863 = VECTOR('',#102864,1.); +#102864 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102865 = ORIENTED_EDGE('',*,*,#102699,.F.); +#102866 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102867,#102868) + ,(#102869,#102870 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102867 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102868 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102869 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102870 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102871 = ADVANCED_FACE('',(#102872),#102889,.F.); +#102872 = FACE_BOUND('',#102873,.F.); +#102873 = EDGE_LOOP('',(#102874,#102875,#102882,#102888)); +#102874 = ORIENTED_EDGE('',*,*,#102408,.T.); +#102875 = ORIENTED_EDGE('',*,*,#102876,.T.); +#102876 = EDGE_CURVE('',#102401,#102877,#102879,.T.); +#102877 = VERTEX_POINT('',#102878); +#102878 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102879 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102880,#102881), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102880 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102881 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102882 = ORIENTED_EDGE('',*,*,#102883,.F.); +#102883 = EDGE_CURVE('',#102854,#102877,#102884,.T.); +#102884 = LINE('',#102885,#102886); +#102885 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102886 = VECTOR('',#102887,1.); +#102887 = DIRECTION('',(1.,0.,0.)); +#102888 = ORIENTED_EDGE('',*,*,#102853,.F.); +#102889 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102890,#102891) + ,(#102892,#102893 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102890 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102891 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102892 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102893 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102894 = ADVANCED_FACE('',(#102895),#102906,.F.); +#102895 = FACE_BOUND('',#102896,.F.); +#102896 = EDGE_LOOP('',(#102897,#102898,#102899,#102905)); +#102897 = ORIENTED_EDGE('',*,*,#102400,.T.); +#102898 = ORIENTED_EDGE('',*,*,#102609,.T.); +#102899 = ORIENTED_EDGE('',*,*,#102900,.F.); +#102900 = EDGE_CURVE('',#102877,#102602,#102901,.T.); +#102901 = LINE('',#102902,#102903); +#102902 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102903 = VECTOR('',#102904,1.); +#102904 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102905 = ORIENTED_EDGE('',*,*,#102876,.F.); +#102906 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102907,#102908) + ,(#102909,#102910 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102907 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102908 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102909 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102910 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102911 = ADVANCED_FACE('',(#102912),#102981,.F.); +#102912 = FACE_BOUND('',#102913,.F.); +#102913 = EDGE_LOOP('',(#102914,#102915,#102916,#102924,#102933,#102941, + #102949,#102957,#102966,#102974)); +#102914 = ORIENTED_EDGE('',*,*,#102504,.F.); +#102915 = ORIENTED_EDGE('',*,*,#102537,.T.); +#102916 = ORIENTED_EDGE('',*,*,#102917,.T.); +#102917 = EDGE_CURVE('',#102530,#102918,#102920,.T.); +#102918 = VERTEX_POINT('',#102919); +#102919 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#102920 = LINE('',#102921,#102922); +#102921 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#102922 = VECTOR('',#102923,1.); +#102923 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#102924 = ORIENTED_EDGE('',*,*,#102925,.T.); +#102925 = EDGE_CURVE('',#102918,#102926,#102928,.T.); +#102926 = VERTEX_POINT('',#102927); +#102927 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#102928 = CIRCLE('',#102929,0.32); +#102929 = AXIS2_PLACEMENT_3D('',#102930,#102931,#102932); +#102930 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#102931 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#102932 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#102933 = ORIENTED_EDGE('',*,*,#102934,.T.); +#102934 = EDGE_CURVE('',#102926,#102935,#102937,.T.); +#102935 = VERTEX_POINT('',#102936); +#102936 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#102937 = LINE('',#102938,#102939); +#102938 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#102939 = VECTOR('',#102940,1.); +#102940 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#102941 = ORIENTED_EDGE('',*,*,#102942,.T.); +#102942 = EDGE_CURVE('',#102935,#102943,#102945,.T.); +#102943 = VERTEX_POINT('',#102944); +#102944 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#102945 = LINE('',#102946,#102947); +#102946 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#102947 = VECTOR('',#102948,1.); +#102948 = DIRECTION('',(0.,0.,1.)); +#102949 = ORIENTED_EDGE('',*,*,#102950,.T.); +#102950 = EDGE_CURVE('',#102943,#102951,#102953,.T.); +#102951 = VERTEX_POINT('',#102952); +#102952 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#102953 = LINE('',#102954,#102955); +#102954 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#102955 = VECTOR('',#102956,1.); +#102956 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102957 = ORIENTED_EDGE('',*,*,#102958,.T.); +#102958 = EDGE_CURVE('',#102951,#102959,#102961,.T.); +#102959 = VERTEX_POINT('',#102960); +#102960 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#102961 = CIRCLE('',#102962,0.12); +#102962 = AXIS2_PLACEMENT_3D('',#102963,#102964,#102965); +#102963 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#102964 = DIRECTION('',(2.22044604925E-16,1.,4.0141362272E-47)); +#102965 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#102966 = ORIENTED_EDGE('',*,*,#102967,.T.); +#102967 = EDGE_CURVE('',#102959,#102968,#102970,.T.); +#102968 = VERTEX_POINT('',#102969); +#102969 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#102970 = LINE('',#102971,#102972); +#102971 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#102972 = VECTOR('',#102973,1.); +#102973 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#102974 = ORIENTED_EDGE('',*,*,#102975,.T.); +#102975 = EDGE_CURVE('',#102968,#102377,#102976,.T.); +#102976 = CIRCLE('',#102977,0.32); +#102977 = AXIS2_PLACEMENT_3D('',#102978,#102979,#102980); +#102978 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#102979 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#102980 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#102981 = PLANE('',#102982); +#102982 = AXIS2_PLACEMENT_3D('',#102983,#102984,#102985); +#102983 = CARTESIAN_POINT('',(1.610729118287,0.325,0.384660577966)); +#102984 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102985 = DIRECTION('',(0.,0.,1.)); +#102986 = ADVANCED_FACE('',(#102987),#103005,.F.); +#102987 = FACE_BOUND('',#102988,.F.); +#102988 = EDGE_LOOP('',(#102989,#102990,#102998,#103004)); +#102989 = ORIENTED_EDGE('',*,*,#102529,.T.); +#102990 = ORIENTED_EDGE('',*,*,#102991,.T.); +#102991 = EDGE_CURVE('',#102521,#102992,#102994,.T.); +#102992 = VERTEX_POINT('',#102993); +#102993 = CARTESIAN_POINT('',(1.523665661432,-0.325,0.264432583147)); +#102994 = LINE('',#102995,#102996); +#102995 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#102996 = VECTOR('',#102997,1.); +#102997 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#102998 = ORIENTED_EDGE('',*,*,#102999,.F.); +#102999 = EDGE_CURVE('',#102918,#102992,#103000,.T.); +#103000 = LINE('',#103001,#103002); +#103001 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#103002 = VECTOR('',#103003,1.); +#103003 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103004 = ORIENTED_EDGE('',*,*,#102917,.F.); +#103005 = PLANE('',#103006); +#103006 = AXIS2_PLACEMENT_3D('',#103007,#103008,#103009); +#103007 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#103008 = DIRECTION('',(0.989759848633,-2.197708345604E-16, + 0.142742572604)); +#103009 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#103010 = ADVANCED_FACE('',(#103011),#103073,.T.); +#103011 = FACE_BOUND('',#103012,.T.); +#103012 = EDGE_LOOP('',(#103013,#103014,#103015,#103016,#103025,#103033, + #103041,#103049,#103058,#103066)); +#103013 = ORIENTED_EDGE('',*,*,#102552,.F.); +#103014 = ORIENTED_EDGE('',*,*,#102520,.T.); +#103015 = ORIENTED_EDGE('',*,*,#102991,.T.); +#103016 = ORIENTED_EDGE('',*,*,#103017,.T.); +#103017 = EDGE_CURVE('',#102992,#103018,#103020,.T.); +#103018 = VERTEX_POINT('',#103019); +#103019 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17) + ); +#103020 = CIRCLE('',#103021,0.32); +#103021 = AXIS2_PLACEMENT_3D('',#103022,#103023,#103024); +#103022 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#103023 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#103024 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#103025 = ORIENTED_EDGE('',*,*,#103026,.T.); +#103026 = EDGE_CURVE('',#103018,#103027,#103029,.T.); +#103027 = VERTEX_POINT('',#103028); +#103028 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#103029 = LINE('',#103030,#103031); +#103030 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17) + ); +#103031 = VECTOR('',#103032,1.); +#103032 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#103033 = ORIENTED_EDGE('',*,*,#103034,.T.); +#103034 = EDGE_CURVE('',#103027,#103035,#103037,.T.); +#103035 = VERTEX_POINT('',#103036); +#103036 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#103037 = LINE('',#103038,#103039); +#103038 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#103039 = VECTOR('',#103040,1.); +#103040 = DIRECTION('',(0.,0.,1.)); +#103041 = ORIENTED_EDGE('',*,*,#103042,.T.); +#103042 = EDGE_CURVE('',#103035,#103043,#103045,.T.); +#103043 = VERTEX_POINT('',#103044); +#103044 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.2)); +#103045 = LINE('',#103046,#103047); +#103046 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#103047 = VECTOR('',#103048,1.); +#103048 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#103049 = ORIENTED_EDGE('',*,*,#103050,.T.); +#103050 = EDGE_CURVE('',#103043,#103051,#103053,.T.); +#103051 = VERTEX_POINT('',#103052); +#103052 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#103053 = CIRCLE('',#103054,0.12); +#103054 = AXIS2_PLACEMENT_3D('',#103055,#103056,#103057); +#103055 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#103056 = DIRECTION('',(2.22044604925E-16,1.,4.0141362272E-47)); +#103057 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#103058 = ORIENTED_EDGE('',*,*,#103059,.T.); +#103059 = EDGE_CURVE('',#103051,#103060,#103062,.T.); +#103060 = VERTEX_POINT('',#103061); +#103061 = CARTESIAN_POINT('',(1.690138480964,-0.325,0.510567416853)); +#103062 = LINE('',#103063,#103064); +#103063 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#103064 = VECTOR('',#103065,1.); +#103065 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#103066 = ORIENTED_EDGE('',*,*,#103067,.T.); +#103067 = EDGE_CURVE('',#103060,#102146,#103068,.T.); +#103068 = CIRCLE('',#103069,0.32); +#103069 = AXIS2_PLACEMENT_3D('',#103070,#103071,#103072); +#103070 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#103071 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#103072 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#103073 = PLANE('',#103074); +#103074 = AXIS2_PLACEMENT_3D('',#103075,#103076,#103077); +#103075 = CARTESIAN_POINT('',(1.610729118287,-0.325,0.384660577966)); +#103076 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103077 = DIRECTION('',(0.,0.,1.)); +#103078 = ADVANCED_FACE('',(#103079),#103090,.T.); +#103079 = FACE_BOUND('',#103080,.T.); +#103080 = EDGE_LOOP('',(#103081,#103082,#103083,#103084)); +#103081 = ORIENTED_EDGE('',*,*,#102975,.T.); +#103082 = ORIENTED_EDGE('',*,*,#102570,.T.); +#103083 = ORIENTED_EDGE('',*,*,#103067,.F.); +#103084 = ORIENTED_EDGE('',*,*,#103085,.F.); +#103085 = EDGE_CURVE('',#102968,#103060,#103086,.T.); +#103086 = LINE('',#103087,#103088); +#103087 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#103088 = VECTOR('',#103089,1.); +#103089 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103090 = CYLINDRICAL_SURFACE('',#103091,0.32); +#103091 = AXIS2_PLACEMENT_3D('',#103092,#103093,#103094); +#103092 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#103093 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#103094 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#103095 = ADVANCED_FACE('',(#103096,#103106),#103140,.T.); +#103096 = FACE_BOUND('',#103097,.T.); +#103097 = EDGE_LOOP('',(#103098,#103099,#103100,#103101,#103102,#103103, + #103104,#103105)); +#103098 = ORIENTED_EDGE('',*,*,#102706,.F.); +#103099 = ORIENTED_EDGE('',*,*,#102676,.F.); +#103100 = ORIENTED_EDGE('',*,*,#102653,.F.); +#103101 = ORIENTED_EDGE('',*,*,#102630,.F.); +#103102 = ORIENTED_EDGE('',*,*,#102601,.F.); +#103103 = ORIENTED_EDGE('',*,*,#102900,.F.); +#103104 = ORIENTED_EDGE('',*,*,#102883,.F.); +#103105 = ORIENTED_EDGE('',*,*,#102860,.F.); +#103106 = FACE_BOUND('',#103107,.T.); +#103107 = EDGE_LOOP('',(#103108,#103118,#103126,#103134)); +#103108 = ORIENTED_EDGE('',*,*,#103109,.T.); +#103109 = EDGE_CURVE('',#103110,#103112,#103114,.T.); +#103110 = VERTEX_POINT('',#103111); +#103111 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.25)); +#103112 = VERTEX_POINT('',#103113); +#103113 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.25)); +#103114 = LINE('',#103115,#103116); +#103115 = CARTESIAN_POINT('',(-1.233243103516,-0.608243103516,1.25)); +#103116 = VECTOR('',#103117,1.); +#103117 = DIRECTION('',(-1.,0.,0.)); +#103118 = ORIENTED_EDGE('',*,*,#103119,.T.); +#103119 = EDGE_CURVE('',#103112,#103120,#103122,.T.); +#103120 = VERTEX_POINT('',#103121); +#103121 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.25)); +#103122 = LINE('',#103123,#103124); +#103123 = CARTESIAN_POINT('',(-1.183243103516,-0.633682327637,1.25)); +#103124 = VECTOR('',#103125,1.); +#103125 = DIRECTION('',(0.,1.,0.)); +#103126 = ORIENTED_EDGE('',*,*,#103127,.F.); +#103127 = EDGE_CURVE('',#103128,#103120,#103130,.T.); +#103128 = VERTEX_POINT('',#103129); +#103129 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.25)); +#103130 = LINE('',#103131,#103132); +#103131 = CARTESIAN_POINT('',(-1.233243103516,0.608243103516,1.25)); +#103132 = VECTOR('',#103133,1.); +#103133 = DIRECTION('',(-1.,0.,0.)); +#103134 = ORIENTED_EDGE('',*,*,#103135,.F.); +#103135 = EDGE_CURVE('',#103110,#103128,#103136,.T.); +#103136 = LINE('',#103137,#103138); +#103137 = CARTESIAN_POINT('',(-0.683243103516,-0.633682327637,1.25)); +#103138 = VECTOR('',#103139,1.); +#103139 = DIRECTION('',(0.,1.,0.)); +#103140 = PLANE('',#103141); +#103141 = AXIS2_PLACEMENT_3D('',#103142,#103143,#103144); +#103142 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#103143 = DIRECTION('',(0.,0.,1.)); +#103144 = DIRECTION('',(0.889522261294,0.456891832562,-0.)); +#103145 = ADVANCED_FACE('',(#103146),#103157,.F.); +#103146 = FACE_BOUND('',#103147,.F.); +#103147 = EDGE_LOOP('',(#103148,#103154,#103155,#103156)); +#103148 = ORIENTED_EDGE('',*,*,#103149,.T.); +#103149 = EDGE_CURVE('',#102959,#103051,#103150,.T.); +#103150 = LINE('',#103151,#103152); +#103151 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#103152 = VECTOR('',#103153,1.); +#103153 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103154 = ORIENTED_EDGE('',*,*,#103059,.T.); +#103155 = ORIENTED_EDGE('',*,*,#103085,.F.); +#103156 = ORIENTED_EDGE('',*,*,#102967,.F.); +#103157 = PLANE('',#103158); +#103158 = AXIS2_PLACEMENT_3D('',#103159,#103160,#103161); +#103159 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#103160 = DIRECTION('',(-0.989759848633,2.197708345604E-16, + -0.142742572604)); +#103161 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#103162 = ADVANCED_FACE('',(#103163),#103174,.F.); +#103163 = FACE_BOUND('',#103164,.F.); +#103164 = EDGE_LOOP('',(#103165,#103171,#103172,#103173)); +#103165 = ORIENTED_EDGE('',*,*,#103166,.T.); +#103166 = EDGE_CURVE('',#102951,#103043,#103167,.T.); +#103167 = LINE('',#103168,#103169); +#103168 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#103169 = VECTOR('',#103170,1.); +#103170 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103171 = ORIENTED_EDGE('',*,*,#103050,.T.); +#103172 = ORIENTED_EDGE('',*,*,#103149,.F.); +#103173 = ORIENTED_EDGE('',*,*,#102958,.F.); +#103174 = CYLINDRICAL_SURFACE('',#103175,0.12); +#103175 = AXIS2_PLACEMENT_3D('',#103176,#103177,#103178); +#103176 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#103177 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#103178 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#103179 = ADVANCED_FACE('',(#103180),#103191,.F.); +#103180 = FACE_BOUND('',#103181,.F.); +#103181 = EDGE_LOOP('',(#103182,#103188,#103189,#103190)); +#103182 = ORIENTED_EDGE('',*,*,#103183,.T.); +#103183 = EDGE_CURVE('',#102943,#103035,#103184,.T.); +#103184 = LINE('',#103185,#103186); +#103185 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#103186 = VECTOR('',#103187,1.); +#103187 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103188 = ORIENTED_EDGE('',*,*,#103042,.T.); +#103189 = ORIENTED_EDGE('',*,*,#103166,.F.); +#103190 = ORIENTED_EDGE('',*,*,#102950,.F.); +#103191 = PLANE('',#103192); +#103192 = AXIS2_PLACEMENT_3D('',#103193,#103194,#103195); +#103193 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#103194 = DIRECTION('',(0.,0.,-1.)); +#103195 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#103196 = ADVANCED_FACE('',(#103197),#103208,.F.); +#103197 = FACE_BOUND('',#103198,.F.); +#103198 = EDGE_LOOP('',(#103199,#103205,#103206,#103207)); +#103199 = ORIENTED_EDGE('',*,*,#103200,.T.); +#103200 = EDGE_CURVE('',#102935,#103027,#103201,.T.); +#103201 = LINE('',#103202,#103203); +#103202 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#103203 = VECTOR('',#103204,1.); +#103204 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103205 = ORIENTED_EDGE('',*,*,#103034,.T.); +#103206 = ORIENTED_EDGE('',*,*,#103183,.F.); +#103207 = ORIENTED_EDGE('',*,*,#102942,.F.); +#103208 = PLANE('',#103209); +#103209 = AXIS2_PLACEMENT_3D('',#103210,#103211,#103212); +#103210 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#103211 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#103212 = DIRECTION('',(0.,0.,1.)); +#103213 = ADVANCED_FACE('',(#103214),#103225,.F.); +#103214 = FACE_BOUND('',#103215,.F.); +#103215 = EDGE_LOOP('',(#103216,#103222,#103223,#103224)); +#103216 = ORIENTED_EDGE('',*,*,#103217,.T.); +#103217 = EDGE_CURVE('',#102926,#103018,#103218,.T.); +#103218 = LINE('',#103219,#103220); +#103219 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#103220 = VECTOR('',#103221,1.); +#103221 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103222 = ORIENTED_EDGE('',*,*,#103026,.T.); +#103223 = ORIENTED_EDGE('',*,*,#103200,.F.); +#103224 = ORIENTED_EDGE('',*,*,#102934,.F.); +#103225 = PLANE('',#103226); +#103226 = AXIS2_PLACEMENT_3D('',#103227,#103228,#103229); +#103227 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#103228 = DIRECTION('',(0.,0.,1.)); +#103229 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#103230 = ADVANCED_FACE('',(#103231),#103237,.T.); +#103231 = FACE_BOUND('',#103232,.T.); +#103232 = EDGE_LOOP('',(#103233,#103234,#103235,#103236)); +#103233 = ORIENTED_EDGE('',*,*,#102925,.T.); +#103234 = ORIENTED_EDGE('',*,*,#103217,.T.); +#103235 = ORIENTED_EDGE('',*,*,#103017,.F.); +#103236 = ORIENTED_EDGE('',*,*,#102999,.F.); +#103237 = CYLINDRICAL_SURFACE('',#103238,0.32); +#103238 = AXIS2_PLACEMENT_3D('',#103239,#103240,#103241); +#103239 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#103240 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#103241 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#103242 = ADVANCED_FACE('',(#103243),#103268,.F.); +#103243 = FACE_BOUND('',#103244,.F.); +#103244 = EDGE_LOOP('',(#103245,#103246,#103254,#103262)); +#103245 = ORIENTED_EDGE('',*,*,#103109,.T.); +#103246 = ORIENTED_EDGE('',*,*,#103247,.T.); +#103247 = EDGE_CURVE('',#103112,#103248,#103250,.T.); +#103248 = VERTEX_POINT('',#103249); +#103249 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103250 = LINE('',#103251,#103252); +#103251 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#103252 = VECTOR('',#103253,1.); +#103253 = DIRECTION('',(0.,0.,1.)); +#103254 = ORIENTED_EDGE('',*,*,#103255,.T.); +#103255 = EDGE_CURVE('',#103248,#103256,#103258,.T.); +#103256 = VERTEX_POINT('',#103257); +#103257 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#103258 = LINE('',#103259,#103260); +#103259 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103260 = VECTOR('',#103261,1.); +#103261 = DIRECTION('',(1.,0.,0.)); +#103262 = ORIENTED_EDGE('',*,*,#103263,.F.); +#103263 = EDGE_CURVE('',#103110,#103256,#103264,.T.); +#103264 = LINE('',#103265,#103266); +#103265 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#103266 = VECTOR('',#103267,1.); +#103267 = DIRECTION('',(0.,0.,1.)); +#103268 = PLANE('',#103269); +#103269 = AXIS2_PLACEMENT_3D('',#103270,#103271,#103272); +#103270 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#103271 = DIRECTION('',(0.,1.,0.)); +#103272 = DIRECTION('',(0.,-0.,1.)); +#103273 = ADVANCED_FACE('',(#103274),#103292,.T.); +#103274 = FACE_BOUND('',#103275,.T.); +#103275 = EDGE_LOOP('',(#103276,#103277,#103278,#103286)); +#103276 = ORIENTED_EDGE('',*,*,#103263,.F.); +#103277 = ORIENTED_EDGE('',*,*,#103135,.T.); +#103278 = ORIENTED_EDGE('',*,*,#103279,.T.); +#103279 = EDGE_CURVE('',#103128,#103280,#103282,.T.); +#103280 = VERTEX_POINT('',#103281); +#103281 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.26)); +#103282 = LINE('',#103283,#103284); +#103283 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.24)); +#103284 = VECTOR('',#103285,1.); +#103285 = DIRECTION('',(0.,0.,1.)); +#103286 = ORIENTED_EDGE('',*,*,#103287,.F.); +#103287 = EDGE_CURVE('',#103256,#103280,#103288,.T.); +#103288 = LINE('',#103289,#103290); +#103289 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#103290 = VECTOR('',#103291,1.); +#103291 = DIRECTION('',(0.,1.,0.)); +#103292 = PLANE('',#103293); +#103293 = AXIS2_PLACEMENT_3D('',#103294,#103295,#103296); +#103294 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#103295 = DIRECTION('',(1.,0.,0.)); +#103296 = DIRECTION('',(0.,0.,1.)); +#103297 = ADVANCED_FACE('',(#103298),#103316,.T.); +#103298 = FACE_BOUND('',#103299,.T.); +#103299 = EDGE_LOOP('',(#103300,#103301,#103309,#103315)); +#103300 = ORIENTED_EDGE('',*,*,#103127,.T.); +#103301 = ORIENTED_EDGE('',*,*,#103302,.T.); +#103302 = EDGE_CURVE('',#103120,#103303,#103305,.T.); +#103303 = VERTEX_POINT('',#103304); +#103304 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#103305 = LINE('',#103306,#103307); +#103306 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#103307 = VECTOR('',#103308,1.); +#103308 = DIRECTION('',(0.,0.,1.)); +#103309 = ORIENTED_EDGE('',*,*,#103310,.T.); +#103310 = EDGE_CURVE('',#103303,#103280,#103311,.T.); +#103311 = LINE('',#103312,#103313); +#103312 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#103313 = VECTOR('',#103314,1.); +#103314 = DIRECTION('',(1.,0.,0.)); +#103315 = ORIENTED_EDGE('',*,*,#103279,.F.); +#103316 = PLANE('',#103317); +#103317 = AXIS2_PLACEMENT_3D('',#103318,#103319,#103320); +#103318 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#103319 = DIRECTION('',(0.,1.,0.)); +#103320 = DIRECTION('',(0.,-0.,1.)); +#103321 = ADVANCED_FACE('',(#103322),#103333,.F.); +#103322 = FACE_BOUND('',#103323,.F.); +#103323 = EDGE_LOOP('',(#103324,#103325,#103326,#103327)); +#103324 = ORIENTED_EDGE('',*,*,#103247,.F.); +#103325 = ORIENTED_EDGE('',*,*,#103119,.T.); +#103326 = ORIENTED_EDGE('',*,*,#103302,.T.); +#103327 = ORIENTED_EDGE('',*,*,#103328,.F.); +#103328 = EDGE_CURVE('',#103248,#103303,#103329,.T.); +#103329 = LINE('',#103330,#103331); +#103330 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103331 = VECTOR('',#103332,1.); +#103332 = DIRECTION('',(0.,1.,0.)); +#103333 = PLANE('',#103334); +#103334 = AXIS2_PLACEMENT_3D('',#103335,#103336,#103337); +#103335 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#103336 = DIRECTION('',(1.,0.,0.)); +#103337 = DIRECTION('',(0.,0.,1.)); +#103338 = ADVANCED_FACE('',(#103339),#103345,.T.); +#103339 = FACE_BOUND('',#103340,.T.); +#103340 = EDGE_LOOP('',(#103341,#103342,#103343,#103344)); +#103341 = ORIENTED_EDGE('',*,*,#103328,.F.); +#103342 = ORIENTED_EDGE('',*,*,#103255,.T.); +#103343 = ORIENTED_EDGE('',*,*,#103287,.T.); +#103344 = ORIENTED_EDGE('',*,*,#103310,.F.); +#103345 = PLANE('',#103346); +#103346 = AXIS2_PLACEMENT_3D('',#103347,#103348,#103349); +#103347 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103348 = DIRECTION('',(0.,0.,1.)); +#103349 = DIRECTION('',(1.,0.,-0.)); +#103350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#103354)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#103351,#103352,#103353)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#103351 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#103352 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#103353 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#103354 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#103351, + 'distance_accuracy_value','confusion accuracy'); +#103355 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103356,#103358); +#103356 = ( REPRESENTATION_RELATIONSHIP('','',#101661,#101638) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103357) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103357 = ITEM_DEFINED_TRANSFORMATION('','',#11,#101639); +#103358 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103359); +#103359 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('132','=>[0:1:1:62]','',#101633 + ,#101656,$); +#103360 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#101658)); +#103361 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103362,#103364); +#103362 = ( REPRESENTATION_RELATIONSHIP('','',#65643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103363) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103363 = ITEM_DEFINED_TRANSFORMATION('','',#11,#411); +#103364 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103365); +#103365 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('134','C33','',#5,#65638,$); +#103366 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103367,#103369); +#103367 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103368) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103368 = ITEM_DEFINED_TRANSFORMATION('','',#11,#415); +#103369 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103370); +#103370 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('135','Rfreq','',#5,#523,$); +#103371 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103372,#103374); +#103372 = ( REPRESENTATION_RELATIONSHIP('','',#6178,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103373) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103373 = ITEM_DEFINED_TRANSFORMATION('','',#11,#419); +#103374 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103375); +#103375 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('136','P3','',#5,#6173,$); +#103376 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103377,#103379); +#103377 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103378) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103378 = ITEM_DEFINED_TRANSFORMATION('','',#11,#423); +#103379 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103380); +#103380 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('137','Rig','',#5,#523,$); +#103381 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103382,#103384); +#103382 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103383) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103383 = ITEM_DEFINED_TRANSFORMATION('','',#11,#427); +#103384 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103385); +#103385 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('138','RB1','',#5,#523,$); +#103386 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103387,#103389); +#103387 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103388) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103388 = ITEM_DEFINED_TRANSFORMATION('','',#11,#431); +#103389 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103390); +#103390 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('139','Ren1','',#5,#523,$); +#103391 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103392,#103394); +#103392 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103393) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103393 = ITEM_DEFINED_TRANSFORMATION('','',#11,#435); +#103394 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103395); +#103395 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('140','C5','',#5,#14742,$); +#103396 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103397,#103399); +#103397 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103398) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103398 = ITEM_DEFINED_TRANSFORMATION('','',#11,#439); +#103399 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103400); +#103400 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('141','R8','',#5,#523,$); +#103401 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103402,#103404); +#103402 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103403) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103403 = ITEM_DEFINED_TRANSFORMATION('','',#11,#443); +#103404 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103405); +#103405 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('142','C24','',#5,#14742,$); +#103406 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103407,#103409); +#103407 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103408) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103408 = ITEM_DEFINED_TRANSFORMATION('','',#11,#447); +#103409 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103410); +#103410 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('143','R54','',#5,#523,$); +#103411 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103412,#103414); +#103412 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103413) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103413 = ITEM_DEFINED_TRANSFORMATION('','',#11,#451); +#103414 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103415); +#103415 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('144','R57','',#5,#523,$); +#103416 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103417,#103419); +#103417 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103418) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103418 = ITEM_DEFINED_TRANSFORMATION('','',#11,#455); +#103419 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103420); +#103420 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('145','R50','',#5,#523,$); +#103421 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103422,#103424); +#103422 = ( REPRESENTATION_RELATIONSHIP('','',#4928,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103423) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103423 = ITEM_DEFINED_TRANSFORMATION('','',#11,#459); +#103424 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103425); +#103425 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('146','Dbk2','',#5,#4923,$); +#103426 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103427,#103429); +#103427 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103428) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103428 = ITEM_DEFINED_TRANSFORMATION('','',#11,#463); +#103429 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103430); +#103430 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('147','Cu4','',#5,#14742,$); +#103431 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103432,#103434); +#103432 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103433) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103433 = ITEM_DEFINED_TRANSFORMATION('','',#11,#467); +#103434 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103435); +#103435 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('148','C23','',#5,#42695,$); +#103436 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103437,#103439); +#103437 = ( REPRESENTATION_RELATIONSHIP('','',#101638,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103438) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103438 = ITEM_DEFINED_TRANSFORMATION('','',#11,#471); +#103439 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103440); +#103440 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('149','D6','',#5,#101633,$); +#103441 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103442,#103444); +#103442 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103443) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103443 = ITEM_DEFINED_TRANSFORMATION('','',#11,#475); +#103444 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103445); +#103445 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('150','D4G','',#5,#10415,$); +#103446 = SHAPE_DEFINITION_REPRESENTATION(#103447,#103453); +#103447 = PRODUCT_DEFINITION_SHAPE('','',#103448); +#103448 = PRODUCT_DEFINITION('design','',#103449,#103452); +#103449 = PRODUCT_DEFINITION_FORMATION('','',#103450); +#103450 = PRODUCT('PinSocket_1x08_P2.54mm_Vertical', + 'PinSocket_1x08_P2.54mm_Vertical','',(#103451)); +#103451 = PRODUCT_CONTEXT('',#2,'mechanical'); +#103452 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#103453 = SHAPE_REPRESENTATION('',(#11,#103454),#103458); +#103454 = AXIS2_PLACEMENT_3D('',#103455,#103456,#103457); +#103455 = CARTESIAN_POINT('',(0.,0.,0.)); +#103456 = DIRECTION('',(0.,0.,1.)); +#103457 = DIRECTION('',(1.,0.,-0.)); +#103458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#103462)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#103459,#103460,#103461)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#103459 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#103460 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#103461 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#103462 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#103459, + 'distance_accuracy_value','confusion accuracy'); +#103463 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103464,#103466); +#103464 = ( REPRESENTATION_RELATIONSHIP('','',#103453,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103465) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103465 = ITEM_DEFINED_TRANSFORMATION('','',#11,#479); +#103466 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103467); +#103467 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('152','MOD1','',#5,#103448,$); +#103468 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#103450)); +#103469 = SHAPE_DEFINITION_REPRESENTATION(#103470,#103476); +#103470 = PRODUCT_DEFINITION_SHAPE('','',#103471); +#103471 = PRODUCT_DEFINITION('design','',#103472,#103475); +#103472 = PRODUCT_DEFINITION_FORMATION('','',#103473); +#103473 = PRODUCT('PinSocket_1x08_P2.54mm_Vertical', + 'PinSocket_1x08_P2.54mm_Vertical','',(#103474)); +#103474 = PRODUCT_CONTEXT('',#2,'mechanical'); +#103475 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#103476 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#103477),#109967); +#103477 = MANIFOLD_SOLID_BREP('',#103478); +#103478 = CLOSED_SHELL('',(#103479,#103519,#103582,#103645,#103662, + #103951,#103973,#103990,#104535,#104547,#104559,#104590,#104614, + #104638,#104655,#104686,#104710,#104734,#104751,#104782,#104806, + #104830,#104847,#104878,#104902,#104926,#104943,#104974,#104998, + #105022,#105039,#105070,#105094,#105118,#105135,#105166,#105190, + #105214,#105231,#105262,#105286,#105310,#105327,#105344,#105391, + #105408,#105455,#105472,#105519,#105536,#105583,#105600,#105647, + #105664,#105711,#105728,#105775,#105792,#105839,#105856,#105903, + #105920,#105967,#105984,#106031,#106048,#106095,#106112,#106159, + #106176,#106223,#106240,#106287,#106304,#106351,#106382,#106438, + #106462,#106511,#106542,#106598,#106622,#106671,#106702,#106758, + #106782,#106831,#106862,#106918,#106942,#106991,#107022,#107078, + #107102,#107151,#107182,#107238,#107262,#107311,#107342,#107398, + #107422,#107471,#107502,#107558,#107582,#107631,#107648,#107665, + #107682,#107699,#107711,#107728,#107745,#107762,#107779,#107791, + #107808,#107825,#107842,#107859,#107871,#107888,#107905,#107922, + #107939,#107951,#107968,#107985,#108002,#108019,#108031,#108048, + #108065,#108082,#108099,#108111,#108128,#108145,#108162,#108179, + #108191,#108208,#108225,#108242,#108259,#108271,#108288,#108305, + #108354,#108378,#108420,#108437,#108454,#108471,#108520,#108544, + #108586,#108603,#108620,#108637,#108686,#108710,#108752,#108769, + #108786,#108803,#108852,#108876,#108918,#108935,#108952,#108969, + #109018,#109042,#109084,#109101,#109118,#109135,#109184,#109208, + #109250,#109267,#109284,#109301,#109350,#109374,#109416,#109433, + #109450,#109467,#109516,#109540,#109582,#109599,#109616,#109633, + #109645,#109662,#109679,#109691,#109708,#109725,#109737,#109754, + #109771,#109783,#109800,#109817,#109829,#109846,#109863,#109875, + #109892,#109909,#109921,#109938,#109955)); +#103479 = ADVANCED_FACE('',(#103480),#103514,.F.); +#103480 = FACE_BOUND('',#103481,.F.); +#103481 = EDGE_LOOP('',(#103482,#103492,#103500,#103508)); +#103482 = ORIENTED_EDGE('',*,*,#103483,.T.); +#103483 = EDGE_CURVE('',#103484,#103486,#103488,.T.); +#103484 = VERTEX_POINT('',#103485); +#103485 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103486 = VERTEX_POINT('',#103487); +#103487 = CARTESIAN_POINT('',(1.27,-19.05,8.5)); +#103488 = LINE('',#103489,#103490); +#103489 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103490 = VECTOR('',#103491,1.); +#103491 = DIRECTION('',(0.,0.,1.)); +#103492 = ORIENTED_EDGE('',*,*,#103493,.T.); +#103493 = EDGE_CURVE('',#103486,#103494,#103496,.T.); +#103494 = VERTEX_POINT('',#103495); +#103495 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#103496 = LINE('',#103497,#103498); +#103497 = CARTESIAN_POINT('',(1.27,-19.05,8.5)); +#103498 = VECTOR('',#103499,1.); +#103499 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103500 = ORIENTED_EDGE('',*,*,#103501,.F.); +#103501 = EDGE_CURVE('',#103502,#103494,#103504,.T.); +#103502 = VERTEX_POINT('',#103503); +#103503 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103504 = LINE('',#103505,#103506); +#103505 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103506 = VECTOR('',#103507,1.); +#103507 = DIRECTION('',(0.,0.,1.)); +#103508 = ORIENTED_EDGE('',*,*,#103509,.F.); +#103509 = EDGE_CURVE('',#103484,#103502,#103510,.T.); +#103510 = LINE('',#103511,#103512); +#103511 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103512 = VECTOR('',#103513,1.); +#103513 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103514 = PLANE('',#103515); +#103515 = AXIS2_PLACEMENT_3D('',#103516,#103517,#103518); +#103516 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103518 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103519 = ADVANCED_FACE('',(#103520),#103577,.F.); +#103520 = FACE_BOUND('',#103521,.F.); +#103521 = EDGE_LOOP('',(#103522,#103532,#103540,#103546,#103547,#103555, + #103563,#103571)); +#103522 = ORIENTED_EDGE('',*,*,#103523,.F.); +#103523 = EDGE_CURVE('',#103524,#103526,#103528,.T.); +#103524 = VERTEX_POINT('',#103525); +#103525 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103526 = VERTEX_POINT('',#103527); +#103527 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.)); +#103528 = LINE('',#103529,#103530); +#103529 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103530 = VECTOR('',#103531,1.); +#103531 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103532 = ORIENTED_EDGE('',*,*,#103533,.T.); +#103533 = EDGE_CURVE('',#103524,#103534,#103536,.T.); +#103534 = VERTEX_POINT('',#103535); +#103535 = CARTESIAN_POINT('',(-1.27,-19.05,8.5)); +#103536 = LINE('',#103537,#103538); +#103537 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103538 = VECTOR('',#103539,1.); +#103539 = DIRECTION('',(0.,0.,1.)); +#103540 = ORIENTED_EDGE('',*,*,#103541,.T.); +#103541 = EDGE_CURVE('',#103534,#103486,#103542,.T.); +#103542 = LINE('',#103543,#103544); +#103543 = CARTESIAN_POINT('',(-1.27,-19.05,8.5)); +#103544 = VECTOR('',#103545,1.); +#103545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103546 = ORIENTED_EDGE('',*,*,#103483,.F.); +#103547 = ORIENTED_EDGE('',*,*,#103548,.F.); +#103548 = EDGE_CURVE('',#103549,#103484,#103551,.T.); +#103549 = VERTEX_POINT('',#103550); +#103550 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#103551 = LINE('',#103552,#103553); +#103552 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103553 = VECTOR('',#103554,1.); +#103554 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103555 = ORIENTED_EDGE('',*,*,#103556,.T.); +#103556 = EDGE_CURVE('',#103549,#103557,#103559,.T.); +#103557 = VERTEX_POINT('',#103558); +#103558 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.2)); +#103559 = LINE('',#103560,#103561); +#103560 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#103561 = VECTOR('',#103562,1.); +#103562 = DIRECTION('',(0.,0.,1.)); +#103563 = ORIENTED_EDGE('',*,*,#103564,.F.); +#103564 = EDGE_CURVE('',#103565,#103557,#103567,.T.); +#103565 = VERTEX_POINT('',#103566); +#103566 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.2)); +#103567 = LINE('',#103568,#103569); +#103568 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.2)); +#103569 = VECTOR('',#103570,1.); +#103570 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103571 = ORIENTED_EDGE('',*,*,#103572,.F.); +#103572 = EDGE_CURVE('',#103526,#103565,#103573,.T.); +#103573 = LINE('',#103574,#103575); +#103574 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.)); +#103575 = VECTOR('',#103576,1.); +#103576 = DIRECTION('',(0.,0.,1.)); +#103577 = PLANE('',#103578); +#103578 = AXIS2_PLACEMENT_3D('',#103579,#103580,#103581); +#103579 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103580 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103581 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103582 = ADVANCED_FACE('',(#103583),#103640,.F.); +#103583 = FACE_BOUND('',#103584,.F.); +#103584 = EDGE_LOOP('',(#103585,#103593,#103594,#103602,#103610,#103618, + #103626,#103634)); +#103585 = ORIENTED_EDGE('',*,*,#103586,.F.); +#103586 = EDGE_CURVE('',#103502,#103587,#103589,.T.); +#103587 = VERTEX_POINT('',#103588); +#103588 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#103589 = LINE('',#103590,#103591); +#103590 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103591 = VECTOR('',#103592,1.); +#103592 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103593 = ORIENTED_EDGE('',*,*,#103501,.T.); +#103594 = ORIENTED_EDGE('',*,*,#103595,.T.); +#103595 = EDGE_CURVE('',#103494,#103596,#103598,.T.); +#103596 = VERTEX_POINT('',#103597); +#103597 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#103598 = LINE('',#103599,#103600); +#103599 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#103600 = VECTOR('',#103601,1.); +#103601 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103602 = ORIENTED_EDGE('',*,*,#103603,.F.); +#103603 = EDGE_CURVE('',#103604,#103596,#103606,.T.); +#103604 = VERTEX_POINT('',#103605); +#103605 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#103606 = LINE('',#103607,#103608); +#103607 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#103608 = VECTOR('',#103609,1.); +#103609 = DIRECTION('',(0.,0.,1.)); +#103610 = ORIENTED_EDGE('',*,*,#103611,.F.); +#103611 = EDGE_CURVE('',#103612,#103604,#103614,.T.); +#103612 = VERTEX_POINT('',#103613); +#103613 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103614 = LINE('',#103615,#103616); +#103615 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103616 = VECTOR('',#103617,1.); +#103617 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103618 = ORIENTED_EDGE('',*,*,#103619,.T.); +#103619 = EDGE_CURVE('',#103612,#103620,#103622,.T.); +#103620 = VERTEX_POINT('',#103621); +#103621 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#103622 = LINE('',#103623,#103624); +#103623 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103624 = VECTOR('',#103625,1.); +#103625 = DIRECTION('',(0.,0.,1.)); +#103626 = ORIENTED_EDGE('',*,*,#103627,.F.); +#103627 = EDGE_CURVE('',#103628,#103620,#103630,.T.); +#103628 = VERTEX_POINT('',#103629); +#103629 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#103630 = LINE('',#103631,#103632); +#103631 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#103632 = VECTOR('',#103633,1.); +#103633 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103634 = ORIENTED_EDGE('',*,*,#103635,.F.); +#103635 = EDGE_CURVE('',#103587,#103628,#103636,.T.); +#103636 = LINE('',#103637,#103638); +#103637 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#103638 = VECTOR('',#103639,1.); +#103639 = DIRECTION('',(0.,0.,1.)); +#103640 = PLANE('',#103641); +#103641 = AXIS2_PLACEMENT_3D('',#103642,#103643,#103644); +#103642 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103643 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103644 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103645 = ADVANCED_FACE('',(#103646),#103657,.F.); +#103646 = FACE_BOUND('',#103647,.F.); +#103647 = EDGE_LOOP('',(#103648,#103649,#103650,#103651)); +#103648 = ORIENTED_EDGE('',*,*,#103548,.T.); +#103649 = ORIENTED_EDGE('',*,*,#103509,.T.); +#103650 = ORIENTED_EDGE('',*,*,#103586,.T.); +#103651 = ORIENTED_EDGE('',*,*,#103652,.F.); +#103652 = EDGE_CURVE('',#103549,#103587,#103653,.T.); +#103653 = LINE('',#103654,#103655); +#103654 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#103655 = VECTOR('',#103656,1.); +#103656 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103657 = PLANE('',#103658); +#103658 = AXIS2_PLACEMENT_3D('',#103659,#103660,#103661); +#103659 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,0.)); +#103660 = DIRECTION('',(0.,0.,1.)); +#103661 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#103662 = ADVANCED_FACE('',(#103663,#103674,#103708,#103742,#103776, + #103810,#103844,#103878,#103912),#103946,.T.); +#103663 = FACE_BOUND('',#103664,.T.); +#103664 = EDGE_LOOP('',(#103665,#103666,#103667,#103673)); +#103665 = ORIENTED_EDGE('',*,*,#103493,.T.); +#103666 = ORIENTED_EDGE('',*,*,#103595,.T.); +#103667 = ORIENTED_EDGE('',*,*,#103668,.T.); +#103668 = EDGE_CURVE('',#103596,#103534,#103669,.T.); +#103669 = LINE('',#103670,#103671); +#103670 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#103671 = VECTOR('',#103672,1.); +#103672 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103673 = ORIENTED_EDGE('',*,*,#103541,.T.); +#103674 = FACE_BOUND('',#103675,.T.); +#103675 = EDGE_LOOP('',(#103676,#103686,#103694,#103702)); +#103676 = ORIENTED_EDGE('',*,*,#103677,.F.); +#103677 = EDGE_CURVE('',#103678,#103680,#103682,.T.); +#103678 = VERTEX_POINT('',#103679); +#103679 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#103680 = VERTEX_POINT('',#103681); +#103681 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#103682 = LINE('',#103683,#103684); +#103683 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#103684 = VECTOR('',#103685,1.); +#103685 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103686 = ORIENTED_EDGE('',*,*,#103687,.F.); +#103687 = EDGE_CURVE('',#103688,#103678,#103690,.T.); +#103688 = VERTEX_POINT('',#103689); +#103689 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#103690 = LINE('',#103691,#103692); +#103691 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#103692 = VECTOR('',#103693,1.); +#103693 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103694 = ORIENTED_EDGE('',*,*,#103695,.F.); +#103695 = EDGE_CURVE('',#103696,#103688,#103698,.T.); +#103696 = VERTEX_POINT('',#103697); +#103697 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#103698 = LINE('',#103699,#103700); +#103699 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#103700 = VECTOR('',#103701,1.); +#103701 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103702 = ORIENTED_EDGE('',*,*,#103703,.F.); +#103703 = EDGE_CURVE('',#103680,#103696,#103704,.T.); +#103704 = LINE('',#103705,#103706); +#103705 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#103706 = VECTOR('',#103707,1.); +#103707 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103708 = FACE_BOUND('',#103709,.T.); +#103709 = EDGE_LOOP('',(#103710,#103720,#103728,#103736)); +#103710 = ORIENTED_EDGE('',*,*,#103711,.F.); +#103711 = EDGE_CURVE('',#103712,#103714,#103716,.T.); +#103712 = VERTEX_POINT('',#103713); +#103713 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#103714 = VERTEX_POINT('',#103715); +#103715 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#103716 = LINE('',#103717,#103718); +#103717 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#103718 = VECTOR('',#103719,1.); +#103719 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103720 = ORIENTED_EDGE('',*,*,#103721,.F.); +#103721 = EDGE_CURVE('',#103722,#103712,#103724,.T.); +#103722 = VERTEX_POINT('',#103723); +#103723 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#103724 = LINE('',#103725,#103726); +#103725 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#103726 = VECTOR('',#103727,1.); +#103727 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103728 = ORIENTED_EDGE('',*,*,#103729,.F.); +#103729 = EDGE_CURVE('',#103730,#103722,#103732,.T.); +#103730 = VERTEX_POINT('',#103731); +#103731 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#103732 = LINE('',#103733,#103734); +#103733 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#103734 = VECTOR('',#103735,1.); +#103735 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103736 = ORIENTED_EDGE('',*,*,#103737,.F.); +#103737 = EDGE_CURVE('',#103714,#103730,#103738,.T.); +#103738 = LINE('',#103739,#103740); +#103739 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#103740 = VECTOR('',#103741,1.); +#103741 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103742 = FACE_BOUND('',#103743,.T.); +#103743 = EDGE_LOOP('',(#103744,#103754,#103762,#103770)); +#103744 = ORIENTED_EDGE('',*,*,#103745,.F.); +#103745 = EDGE_CURVE('',#103746,#103748,#103750,.T.); +#103746 = VERTEX_POINT('',#103747); +#103747 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#103748 = VERTEX_POINT('',#103749); +#103749 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#103750 = LINE('',#103751,#103752); +#103751 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#103752 = VECTOR('',#103753,1.); +#103753 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103754 = ORIENTED_EDGE('',*,*,#103755,.F.); +#103755 = EDGE_CURVE('',#103756,#103746,#103758,.T.); +#103756 = VERTEX_POINT('',#103757); +#103757 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#103758 = LINE('',#103759,#103760); +#103759 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#103760 = VECTOR('',#103761,1.); +#103761 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103762 = ORIENTED_EDGE('',*,*,#103763,.F.); +#103763 = EDGE_CURVE('',#103764,#103756,#103766,.T.); +#103764 = VERTEX_POINT('',#103765); +#103765 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#103766 = LINE('',#103767,#103768); +#103767 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#103768 = VECTOR('',#103769,1.); +#103769 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103770 = ORIENTED_EDGE('',*,*,#103771,.F.); +#103771 = EDGE_CURVE('',#103748,#103764,#103772,.T.); +#103772 = LINE('',#103773,#103774); +#103773 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#103774 = VECTOR('',#103775,1.); +#103775 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103776 = FACE_BOUND('',#103777,.T.); +#103777 = EDGE_LOOP('',(#103778,#103788,#103796,#103804)); +#103778 = ORIENTED_EDGE('',*,*,#103779,.F.); +#103779 = EDGE_CURVE('',#103780,#103782,#103784,.T.); +#103780 = VERTEX_POINT('',#103781); +#103781 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#103782 = VERTEX_POINT('',#103783); +#103783 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#103784 = LINE('',#103785,#103786); +#103785 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#103786 = VECTOR('',#103787,1.); +#103787 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103788 = ORIENTED_EDGE('',*,*,#103789,.F.); +#103789 = EDGE_CURVE('',#103790,#103780,#103792,.T.); +#103790 = VERTEX_POINT('',#103791); +#103791 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#103792 = LINE('',#103793,#103794); +#103793 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#103794 = VECTOR('',#103795,1.); +#103795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103796 = ORIENTED_EDGE('',*,*,#103797,.F.); +#103797 = EDGE_CURVE('',#103798,#103790,#103800,.T.); +#103798 = VERTEX_POINT('',#103799); +#103799 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#103800 = LINE('',#103801,#103802); +#103801 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#103802 = VECTOR('',#103803,1.); +#103803 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103804 = ORIENTED_EDGE('',*,*,#103805,.F.); +#103805 = EDGE_CURVE('',#103782,#103798,#103806,.T.); +#103806 = LINE('',#103807,#103808); +#103807 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#103808 = VECTOR('',#103809,1.); +#103809 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103810 = FACE_BOUND('',#103811,.T.); +#103811 = EDGE_LOOP('',(#103812,#103822,#103830,#103838)); +#103812 = ORIENTED_EDGE('',*,*,#103813,.F.); +#103813 = EDGE_CURVE('',#103814,#103816,#103818,.T.); +#103814 = VERTEX_POINT('',#103815); +#103815 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#103816 = VERTEX_POINT('',#103817); +#103817 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#103818 = LINE('',#103819,#103820); +#103819 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#103820 = VECTOR('',#103821,1.); +#103821 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103822 = ORIENTED_EDGE('',*,*,#103823,.F.); +#103823 = EDGE_CURVE('',#103824,#103814,#103826,.T.); +#103824 = VERTEX_POINT('',#103825); +#103825 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#103826 = LINE('',#103827,#103828); +#103827 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#103828 = VECTOR('',#103829,1.); +#103829 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103830 = ORIENTED_EDGE('',*,*,#103831,.F.); +#103831 = EDGE_CURVE('',#103832,#103824,#103834,.T.); +#103832 = VERTEX_POINT('',#103833); +#103833 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#103834 = LINE('',#103835,#103836); +#103835 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#103836 = VECTOR('',#103837,1.); +#103837 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103838 = ORIENTED_EDGE('',*,*,#103839,.F.); +#103839 = EDGE_CURVE('',#103816,#103832,#103840,.T.); +#103840 = LINE('',#103841,#103842); +#103841 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#103842 = VECTOR('',#103843,1.); +#103843 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103844 = FACE_BOUND('',#103845,.T.); +#103845 = EDGE_LOOP('',(#103846,#103856,#103864,#103872)); +#103846 = ORIENTED_EDGE('',*,*,#103847,.F.); +#103847 = EDGE_CURVE('',#103848,#103850,#103852,.T.); +#103848 = VERTEX_POINT('',#103849); +#103849 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#103850 = VERTEX_POINT('',#103851); +#103851 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#103852 = LINE('',#103853,#103854); +#103853 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#103854 = VECTOR('',#103855,1.); +#103855 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103856 = ORIENTED_EDGE('',*,*,#103857,.F.); +#103857 = EDGE_CURVE('',#103858,#103848,#103860,.T.); +#103858 = VERTEX_POINT('',#103859); +#103859 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#103860 = LINE('',#103861,#103862); +#103861 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#103862 = VECTOR('',#103863,1.); +#103863 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103864 = ORIENTED_EDGE('',*,*,#103865,.F.); +#103865 = EDGE_CURVE('',#103866,#103858,#103868,.T.); +#103866 = VERTEX_POINT('',#103867); +#103867 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#103868 = LINE('',#103869,#103870); +#103869 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#103870 = VECTOR('',#103871,1.); +#103871 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103872 = ORIENTED_EDGE('',*,*,#103873,.F.); +#103873 = EDGE_CURVE('',#103850,#103866,#103874,.T.); +#103874 = LINE('',#103875,#103876); +#103875 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#103876 = VECTOR('',#103877,1.); +#103877 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103878 = FACE_BOUND('',#103879,.T.); +#103879 = EDGE_LOOP('',(#103880,#103890,#103898,#103906)); +#103880 = ORIENTED_EDGE('',*,*,#103881,.F.); +#103881 = EDGE_CURVE('',#103882,#103884,#103886,.T.); +#103882 = VERTEX_POINT('',#103883); +#103883 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#103884 = VERTEX_POINT('',#103885); +#103885 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#103886 = LINE('',#103887,#103888); +#103887 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#103888 = VECTOR('',#103889,1.); +#103889 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103890 = ORIENTED_EDGE('',*,*,#103891,.F.); +#103891 = EDGE_CURVE('',#103892,#103882,#103894,.T.); +#103892 = VERTEX_POINT('',#103893); +#103893 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#103894 = LINE('',#103895,#103896); +#103895 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#103896 = VECTOR('',#103897,1.); +#103897 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103898 = ORIENTED_EDGE('',*,*,#103899,.F.); +#103899 = EDGE_CURVE('',#103900,#103892,#103902,.T.); +#103900 = VERTEX_POINT('',#103901); +#103901 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#103902 = LINE('',#103903,#103904); +#103903 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#103904 = VECTOR('',#103905,1.); +#103905 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103906 = ORIENTED_EDGE('',*,*,#103907,.F.); +#103907 = EDGE_CURVE('',#103884,#103900,#103908,.T.); +#103908 = LINE('',#103909,#103910); +#103909 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#103910 = VECTOR('',#103911,1.); +#103911 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103912 = FACE_BOUND('',#103913,.T.); +#103913 = EDGE_LOOP('',(#103914,#103924,#103932,#103940)); +#103914 = ORIENTED_EDGE('',*,*,#103915,.F.); +#103915 = EDGE_CURVE('',#103916,#103918,#103920,.T.); +#103916 = VERTEX_POINT('',#103917); +#103917 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#103918 = VERTEX_POINT('',#103919); +#103919 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#103920 = LINE('',#103921,#103922); +#103921 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#103922 = VECTOR('',#103923,1.); +#103923 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103924 = ORIENTED_EDGE('',*,*,#103925,.F.); +#103925 = EDGE_CURVE('',#103926,#103916,#103928,.T.); +#103926 = VERTEX_POINT('',#103927); +#103927 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#103928 = LINE('',#103929,#103930); +#103929 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#103930 = VECTOR('',#103931,1.); +#103931 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103932 = ORIENTED_EDGE('',*,*,#103933,.F.); +#103933 = EDGE_CURVE('',#103934,#103926,#103936,.T.); +#103934 = VERTEX_POINT('',#103935); +#103935 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#103936 = LINE('',#103937,#103938); +#103937 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#103938 = VECTOR('',#103939,1.); +#103939 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103940 = ORIENTED_EDGE('',*,*,#103941,.F.); +#103941 = EDGE_CURVE('',#103918,#103934,#103942,.T.); +#103942 = LINE('',#103943,#103944); +#103943 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#103944 = VECTOR('',#103945,1.); +#103945 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103946 = PLANE('',#103947); +#103947 = AXIS2_PLACEMENT_3D('',#103948,#103949,#103950); +#103948 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,8.5)); +#103949 = DIRECTION('',(0.,0.,1.)); +#103950 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#103951 = ADVANCED_FACE('',(#103952),#103968,.F.); +#103952 = FACE_BOUND('',#103953,.F.); +#103953 = EDGE_LOOP('',(#103954,#103955,#103961,#103962)); +#103954 = ORIENTED_EDGE('',*,*,#103523,.T.); +#103955 = ORIENTED_EDGE('',*,*,#103956,.F.); +#103956 = EDGE_CURVE('',#103612,#103526,#103957,.T.); +#103957 = LINE('',#103958,#103959); +#103958 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103959 = VECTOR('',#103960,1.); +#103960 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103961 = ORIENTED_EDGE('',*,*,#103611,.T.); +#103962 = ORIENTED_EDGE('',*,*,#103963,.T.); +#103963 = EDGE_CURVE('',#103604,#103524,#103964,.T.); +#103964 = LINE('',#103965,#103966); +#103965 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#103966 = VECTOR('',#103967,1.); +#103967 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103968 = PLANE('',#103969); +#103969 = AXIS2_PLACEMENT_3D('',#103970,#103971,#103972); +#103970 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,0.)); +#103971 = DIRECTION('',(0.,0.,1.)); +#103972 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#103973 = ADVANCED_FACE('',(#103974),#103985,.T.); +#103974 = FACE_BOUND('',#103975,.T.); +#103975 = EDGE_LOOP('',(#103976,#103977,#103983,#103984)); +#103976 = ORIENTED_EDGE('',*,*,#103619,.T.); +#103977 = ORIENTED_EDGE('',*,*,#103978,.T.); +#103978 = EDGE_CURVE('',#103620,#103565,#103979,.T.); +#103979 = LINE('',#103980,#103981); +#103980 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#103981 = VECTOR('',#103982,1.); +#103982 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103983 = ORIENTED_EDGE('',*,*,#103572,.F.); +#103984 = ORIENTED_EDGE('',*,*,#103956,.F.); +#103985 = PLANE('',#103986); +#103986 = AXIS2_PLACEMENT_3D('',#103987,#103988,#103989); +#103987 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103988 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103989 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103990 = ADVANCED_FACE('',(#103991,#104002,#104068,#104134,#104200, + #104266,#104332,#104398,#104464),#104530,.F.); +#103991 = FACE_BOUND('',#103992,.F.); +#103992 = EDGE_LOOP('',(#103993,#103999,#104000,#104001)); +#103993 = ORIENTED_EDGE('',*,*,#103994,.T.); +#103994 = EDGE_CURVE('',#103557,#103628,#103995,.T.); +#103995 = LINE('',#103996,#103997); +#103996 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.2)); +#103997 = VECTOR('',#103998,1.); +#103998 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103999 = ORIENTED_EDGE('',*,*,#103627,.T.); +#104000 = ORIENTED_EDGE('',*,*,#103978,.T.); +#104001 = ORIENTED_EDGE('',*,*,#103564,.T.); +#104002 = FACE_BOUND('',#104003,.F.); +#104003 = EDGE_LOOP('',(#104004,#104014,#104022,#104030,#104038,#104046, + #104054,#104062)); +#104004 = ORIENTED_EDGE('',*,*,#104005,.F.); +#104005 = EDGE_CURVE('',#104006,#104008,#104010,.T.); +#104006 = VERTEX_POINT('',#104007); +#104007 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104008 = VERTEX_POINT('',#104009); +#104009 = CARTESIAN_POINT('',(0.1,-18.23,0.2)); +#104010 = LINE('',#104011,#104012); +#104011 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104012 = VECTOR('',#104013,1.); +#104013 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104014 = ORIENTED_EDGE('',*,*,#104015,.T.); +#104015 = EDGE_CURVE('',#104006,#104016,#104018,.T.); +#104016 = VERTEX_POINT('',#104017); +#104017 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#104018 = LINE('',#104019,#104020); +#104019 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104020 = VECTOR('',#104021,1.); +#104021 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104022 = ORIENTED_EDGE('',*,*,#104023,.F.); +#104023 = EDGE_CURVE('',#104024,#104016,#104026,.T.); +#104024 = VERTEX_POINT('',#104025); +#104025 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#104026 = LINE('',#104027,#104028); +#104027 = CARTESIAN_POINT('',(-0.1,-13.335,0.2)); +#104028 = VECTOR('',#104029,1.); +#104029 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104030 = ORIENTED_EDGE('',*,*,#104031,.T.); +#104031 = EDGE_CURVE('',#104024,#104032,#104034,.T.); +#104032 = VERTEX_POINT('',#104033); +#104033 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#104034 = LINE('',#104035,#104036); +#104035 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104036 = VECTOR('',#104037,1.); +#104037 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104038 = ORIENTED_EDGE('',*,*,#104039,.T.); +#104039 = EDGE_CURVE('',#104032,#104040,#104042,.T.); +#104040 = VERTEX_POINT('',#104041); +#104041 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#104042 = LINE('',#104043,#104044); +#104043 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#104044 = VECTOR('',#104045,1.); +#104045 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104046 = ORIENTED_EDGE('',*,*,#104047,.T.); +#104047 = EDGE_CURVE('',#104040,#104048,#104050,.T.); +#104048 = VERTEX_POINT('',#104049); +#104049 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#104050 = LINE('',#104051,#104052); +#104051 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#104052 = VECTOR('',#104053,1.); +#104053 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104054 = ORIENTED_EDGE('',*,*,#104055,.T.); +#104055 = EDGE_CURVE('',#104048,#104056,#104058,.T.); +#104056 = VERTEX_POINT('',#104057); +#104057 = CARTESIAN_POINT('',(0.1,-18.08,0.2)); +#104058 = LINE('',#104059,#104060); +#104059 = CARTESIAN_POINT('',(0.1,-13.335,0.2)); +#104060 = VECTOR('',#104061,1.); +#104061 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104062 = ORIENTED_EDGE('',*,*,#104063,.T.); +#104063 = EDGE_CURVE('',#104056,#104008,#104064,.T.); +#104064 = LINE('',#104065,#104066); +#104065 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#104066 = VECTOR('',#104067,1.); +#104067 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104068 = FACE_BOUND('',#104069,.F.); +#104069 = EDGE_LOOP('',(#104070,#104080,#104088,#104096,#104104,#104112, + #104120,#104128)); +#104070 = ORIENTED_EDGE('',*,*,#104071,.F.); +#104071 = EDGE_CURVE('',#104072,#104074,#104076,.T.); +#104072 = VERTEX_POINT('',#104073); +#104073 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104074 = VERTEX_POINT('',#104075); +#104075 = CARTESIAN_POINT('',(0.1,-15.69,0.2)); +#104076 = LINE('',#104077,#104078); +#104077 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104078 = VECTOR('',#104079,1.); +#104079 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104080 = ORIENTED_EDGE('',*,*,#104081,.T.); +#104081 = EDGE_CURVE('',#104072,#104082,#104084,.T.); +#104082 = VERTEX_POINT('',#104083); +#104083 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#104084 = LINE('',#104085,#104086); +#104085 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104086 = VECTOR('',#104087,1.); +#104087 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104088 = ORIENTED_EDGE('',*,*,#104089,.F.); +#104089 = EDGE_CURVE('',#104090,#104082,#104092,.T.); +#104090 = VERTEX_POINT('',#104091); +#104091 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#104092 = LINE('',#104093,#104094); +#104093 = CARTESIAN_POINT('',(-0.1,-12.065,0.2)); +#104094 = VECTOR('',#104095,1.); +#104095 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104096 = ORIENTED_EDGE('',*,*,#104097,.T.); +#104097 = EDGE_CURVE('',#104090,#104098,#104100,.T.); +#104098 = VERTEX_POINT('',#104099); +#104099 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#104100 = LINE('',#104101,#104102); +#104101 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104102 = VECTOR('',#104103,1.); +#104103 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104104 = ORIENTED_EDGE('',*,*,#104105,.T.); +#104105 = EDGE_CURVE('',#104098,#104106,#104108,.T.); +#104106 = VERTEX_POINT('',#104107); +#104107 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#104108 = LINE('',#104109,#104110); +#104109 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#104110 = VECTOR('',#104111,1.); +#104111 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104112 = ORIENTED_EDGE('',*,*,#104113,.T.); +#104113 = EDGE_CURVE('',#104106,#104114,#104116,.T.); +#104114 = VERTEX_POINT('',#104115); +#104115 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#104116 = LINE('',#104117,#104118); +#104117 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#104118 = VECTOR('',#104119,1.); +#104119 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104120 = ORIENTED_EDGE('',*,*,#104121,.T.); +#104121 = EDGE_CURVE('',#104114,#104122,#104124,.T.); +#104122 = VERTEX_POINT('',#104123); +#104123 = CARTESIAN_POINT('',(0.1,-15.54,0.2)); +#104124 = LINE('',#104125,#104126); +#104125 = CARTESIAN_POINT('',(0.1,-12.065,0.2)); +#104126 = VECTOR('',#104127,1.); +#104127 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104128 = ORIENTED_EDGE('',*,*,#104129,.T.); +#104129 = EDGE_CURVE('',#104122,#104074,#104130,.T.); +#104130 = LINE('',#104131,#104132); +#104131 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#104132 = VECTOR('',#104133,1.); +#104133 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104134 = FACE_BOUND('',#104135,.F.); +#104135 = EDGE_LOOP('',(#104136,#104146,#104154,#104162,#104170,#104178, + #104186,#104194)); +#104136 = ORIENTED_EDGE('',*,*,#104137,.F.); +#104137 = EDGE_CURVE('',#104138,#104140,#104142,.T.); +#104138 = VERTEX_POINT('',#104139); +#104139 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104140 = VERTEX_POINT('',#104141); +#104141 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#104142 = LINE('',#104143,#104144); +#104143 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104144 = VECTOR('',#104145,1.); +#104145 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104146 = ORIENTED_EDGE('',*,*,#104147,.T.); +#104147 = EDGE_CURVE('',#104138,#104148,#104150,.T.); +#104148 = VERTEX_POINT('',#104149); +#104149 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#104150 = LINE('',#104151,#104152); +#104151 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104152 = VECTOR('',#104153,1.); +#104153 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104154 = ORIENTED_EDGE('',*,*,#104155,.F.); +#104155 = EDGE_CURVE('',#104156,#104148,#104158,.T.); +#104156 = VERTEX_POINT('',#104157); +#104157 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#104158 = LINE('',#104159,#104160); +#104159 = CARTESIAN_POINT('',(-0.1,-10.795,0.2)); +#104160 = VECTOR('',#104161,1.); +#104161 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104162 = ORIENTED_EDGE('',*,*,#104163,.T.); +#104163 = EDGE_CURVE('',#104156,#104164,#104166,.T.); +#104164 = VERTEX_POINT('',#104165); +#104165 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#104166 = LINE('',#104167,#104168); +#104167 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104168 = VECTOR('',#104169,1.); +#104169 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104170 = ORIENTED_EDGE('',*,*,#104171,.T.); +#104171 = EDGE_CURVE('',#104164,#104172,#104174,.T.); +#104172 = VERTEX_POINT('',#104173); +#104173 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#104174 = LINE('',#104175,#104176); +#104175 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#104176 = VECTOR('',#104177,1.); +#104177 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104178 = ORIENTED_EDGE('',*,*,#104179,.T.); +#104179 = EDGE_CURVE('',#104172,#104180,#104182,.T.); +#104180 = VERTEX_POINT('',#104181); +#104181 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#104182 = LINE('',#104183,#104184); +#104183 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#104184 = VECTOR('',#104185,1.); +#104185 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104186 = ORIENTED_EDGE('',*,*,#104187,.T.); +#104187 = EDGE_CURVE('',#104180,#104188,#104190,.T.); +#104188 = VERTEX_POINT('',#104189); +#104189 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#104190 = LINE('',#104191,#104192); +#104191 = CARTESIAN_POINT('',(0.1,-10.795,0.2)); +#104192 = VECTOR('',#104193,1.); +#104193 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104194 = ORIENTED_EDGE('',*,*,#104195,.T.); +#104195 = EDGE_CURVE('',#104188,#104140,#104196,.T.); +#104196 = LINE('',#104197,#104198); +#104197 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#104198 = VECTOR('',#104199,1.); +#104199 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104200 = FACE_BOUND('',#104201,.F.); +#104201 = EDGE_LOOP('',(#104202,#104212,#104220,#104228,#104236,#104244, + #104252,#104260)); +#104202 = ORIENTED_EDGE('',*,*,#104203,.F.); +#104203 = EDGE_CURVE('',#104204,#104206,#104208,.T.); +#104204 = VERTEX_POINT('',#104205); +#104205 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104206 = VERTEX_POINT('',#104207); +#104207 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#104208 = LINE('',#104209,#104210); +#104209 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104210 = VECTOR('',#104211,1.); +#104211 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104212 = ORIENTED_EDGE('',*,*,#104213,.T.); +#104213 = EDGE_CURVE('',#104204,#104214,#104216,.T.); +#104214 = VERTEX_POINT('',#104215); +#104215 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#104216 = LINE('',#104217,#104218); +#104217 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104218 = VECTOR('',#104219,1.); +#104219 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104220 = ORIENTED_EDGE('',*,*,#104221,.F.); +#104221 = EDGE_CURVE('',#104222,#104214,#104224,.T.); +#104222 = VERTEX_POINT('',#104223); +#104223 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#104224 = LINE('',#104225,#104226); +#104225 = CARTESIAN_POINT('',(-0.1,-9.525,0.2)); +#104226 = VECTOR('',#104227,1.); +#104227 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104228 = ORIENTED_EDGE('',*,*,#104229,.T.); +#104229 = EDGE_CURVE('',#104222,#104230,#104232,.T.); +#104230 = VERTEX_POINT('',#104231); +#104231 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#104232 = LINE('',#104233,#104234); +#104233 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104234 = VECTOR('',#104235,1.); +#104235 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104236 = ORIENTED_EDGE('',*,*,#104237,.T.); +#104237 = EDGE_CURVE('',#104230,#104238,#104240,.T.); +#104238 = VERTEX_POINT('',#104239); +#104239 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#104240 = LINE('',#104241,#104242); +#104241 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#104242 = VECTOR('',#104243,1.); +#104243 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104244 = ORIENTED_EDGE('',*,*,#104245,.T.); +#104245 = EDGE_CURVE('',#104238,#104246,#104248,.T.); +#104246 = VERTEX_POINT('',#104247); +#104247 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#104248 = LINE('',#104249,#104250); +#104249 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#104250 = VECTOR('',#104251,1.); +#104251 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104252 = ORIENTED_EDGE('',*,*,#104253,.T.); +#104253 = EDGE_CURVE('',#104246,#104254,#104256,.T.); +#104254 = VERTEX_POINT('',#104255); +#104255 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#104256 = LINE('',#104257,#104258); +#104257 = CARTESIAN_POINT('',(0.1,-9.525,0.2)); +#104258 = VECTOR('',#104259,1.); +#104259 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104260 = ORIENTED_EDGE('',*,*,#104261,.T.); +#104261 = EDGE_CURVE('',#104254,#104206,#104262,.T.); +#104262 = LINE('',#104263,#104264); +#104263 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#104264 = VECTOR('',#104265,1.); +#104265 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104266 = FACE_BOUND('',#104267,.F.); +#104267 = EDGE_LOOP('',(#104268,#104278,#104286,#104294,#104302,#104310, + #104318,#104326)); +#104268 = ORIENTED_EDGE('',*,*,#104269,.F.); +#104269 = EDGE_CURVE('',#104270,#104272,#104274,.T.); +#104270 = VERTEX_POINT('',#104271); +#104271 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104272 = VERTEX_POINT('',#104273); +#104273 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#104274 = LINE('',#104275,#104276); +#104275 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104276 = VECTOR('',#104277,1.); +#104277 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104278 = ORIENTED_EDGE('',*,*,#104279,.T.); +#104279 = EDGE_CURVE('',#104270,#104280,#104282,.T.); +#104280 = VERTEX_POINT('',#104281); +#104281 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#104282 = LINE('',#104283,#104284); +#104283 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104284 = VECTOR('',#104285,1.); +#104285 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104286 = ORIENTED_EDGE('',*,*,#104287,.F.); +#104287 = EDGE_CURVE('',#104288,#104280,#104290,.T.); +#104288 = VERTEX_POINT('',#104289); +#104289 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#104290 = LINE('',#104291,#104292); +#104291 = CARTESIAN_POINT('',(-0.1,-8.255,0.2)); +#104292 = VECTOR('',#104293,1.); +#104293 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104294 = ORIENTED_EDGE('',*,*,#104295,.T.); +#104295 = EDGE_CURVE('',#104288,#104296,#104298,.T.); +#104296 = VERTEX_POINT('',#104297); +#104297 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#104298 = LINE('',#104299,#104300); +#104299 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104300 = VECTOR('',#104301,1.); +#104301 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104302 = ORIENTED_EDGE('',*,*,#104303,.T.); +#104303 = EDGE_CURVE('',#104296,#104304,#104306,.T.); +#104304 = VERTEX_POINT('',#104305); +#104305 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#104306 = LINE('',#104307,#104308); +#104307 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#104308 = VECTOR('',#104309,1.); +#104309 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104310 = ORIENTED_EDGE('',*,*,#104311,.T.); +#104311 = EDGE_CURVE('',#104304,#104312,#104314,.T.); +#104312 = VERTEX_POINT('',#104313); +#104313 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#104314 = LINE('',#104315,#104316); +#104315 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#104316 = VECTOR('',#104317,1.); +#104317 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104318 = ORIENTED_EDGE('',*,*,#104319,.T.); +#104319 = EDGE_CURVE('',#104312,#104320,#104322,.T.); +#104320 = VERTEX_POINT('',#104321); +#104321 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#104322 = LINE('',#104323,#104324); +#104323 = CARTESIAN_POINT('',(0.1,-8.255,0.2)); +#104324 = VECTOR('',#104325,1.); +#104325 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104326 = ORIENTED_EDGE('',*,*,#104327,.T.); +#104327 = EDGE_CURVE('',#104320,#104272,#104328,.T.); +#104328 = LINE('',#104329,#104330); +#104329 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#104330 = VECTOR('',#104331,1.); +#104331 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104332 = FACE_BOUND('',#104333,.F.); +#104333 = EDGE_LOOP('',(#104334,#104344,#104352,#104360,#104368,#104376, + #104384,#104392)); +#104334 = ORIENTED_EDGE('',*,*,#104335,.F.); +#104335 = EDGE_CURVE('',#104336,#104338,#104340,.T.); +#104336 = VERTEX_POINT('',#104337); +#104337 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104338 = VERTEX_POINT('',#104339); +#104339 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#104340 = LINE('',#104341,#104342); +#104341 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104342 = VECTOR('',#104343,1.); +#104343 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104344 = ORIENTED_EDGE('',*,*,#104345,.T.); +#104345 = EDGE_CURVE('',#104336,#104346,#104348,.T.); +#104346 = VERTEX_POINT('',#104347); +#104347 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#104348 = LINE('',#104349,#104350); +#104349 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104350 = VECTOR('',#104351,1.); +#104351 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104352 = ORIENTED_EDGE('',*,*,#104353,.F.); +#104353 = EDGE_CURVE('',#104354,#104346,#104356,.T.); +#104354 = VERTEX_POINT('',#104355); +#104355 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#104356 = LINE('',#104357,#104358); +#104357 = CARTESIAN_POINT('',(-0.1,-6.985,0.2)); +#104358 = VECTOR('',#104359,1.); +#104359 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104360 = ORIENTED_EDGE('',*,*,#104361,.T.); +#104361 = EDGE_CURVE('',#104354,#104362,#104364,.T.); +#104362 = VERTEX_POINT('',#104363); +#104363 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#104364 = LINE('',#104365,#104366); +#104365 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104366 = VECTOR('',#104367,1.); +#104367 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104368 = ORIENTED_EDGE('',*,*,#104369,.T.); +#104369 = EDGE_CURVE('',#104362,#104370,#104372,.T.); +#104370 = VERTEX_POINT('',#104371); +#104371 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#104372 = LINE('',#104373,#104374); +#104373 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#104374 = VECTOR('',#104375,1.); +#104375 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104376 = ORIENTED_EDGE('',*,*,#104377,.T.); +#104377 = EDGE_CURVE('',#104370,#104378,#104380,.T.); +#104378 = VERTEX_POINT('',#104379); +#104379 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#104380 = LINE('',#104381,#104382); +#104381 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#104382 = VECTOR('',#104383,1.); +#104383 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104384 = ORIENTED_EDGE('',*,*,#104385,.T.); +#104385 = EDGE_CURVE('',#104378,#104386,#104388,.T.); +#104386 = VERTEX_POINT('',#104387); +#104387 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#104388 = LINE('',#104389,#104390); +#104389 = CARTESIAN_POINT('',(0.1,-6.985,0.2)); +#104390 = VECTOR('',#104391,1.); +#104391 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104392 = ORIENTED_EDGE('',*,*,#104393,.T.); +#104393 = EDGE_CURVE('',#104386,#104338,#104394,.T.); +#104394 = LINE('',#104395,#104396); +#104395 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#104396 = VECTOR('',#104397,1.); +#104397 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104398 = FACE_BOUND('',#104399,.F.); +#104399 = EDGE_LOOP('',(#104400,#104410,#104418,#104426,#104434,#104442, + #104450,#104458)); +#104400 = ORIENTED_EDGE('',*,*,#104401,.F.); +#104401 = EDGE_CURVE('',#104402,#104404,#104406,.T.); +#104402 = VERTEX_POINT('',#104403); +#104403 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104404 = VERTEX_POINT('',#104405); +#104405 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#104406 = LINE('',#104407,#104408); +#104407 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104408 = VECTOR('',#104409,1.); +#104409 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104410 = ORIENTED_EDGE('',*,*,#104411,.T.); +#104411 = EDGE_CURVE('',#104402,#104412,#104414,.T.); +#104412 = VERTEX_POINT('',#104413); +#104413 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#104414 = LINE('',#104415,#104416); +#104415 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104416 = VECTOR('',#104417,1.); +#104417 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104418 = ORIENTED_EDGE('',*,*,#104419,.F.); +#104419 = EDGE_CURVE('',#104420,#104412,#104422,.T.); +#104420 = VERTEX_POINT('',#104421); +#104421 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#104422 = LINE('',#104423,#104424); +#104423 = CARTESIAN_POINT('',(-0.1,-5.715,0.2)); +#104424 = VECTOR('',#104425,1.); +#104425 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104426 = ORIENTED_EDGE('',*,*,#104427,.T.); +#104427 = EDGE_CURVE('',#104420,#104428,#104430,.T.); +#104428 = VERTEX_POINT('',#104429); +#104429 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#104430 = LINE('',#104431,#104432); +#104431 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104432 = VECTOR('',#104433,1.); +#104433 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104434 = ORIENTED_EDGE('',*,*,#104435,.T.); +#104435 = EDGE_CURVE('',#104428,#104436,#104438,.T.); +#104436 = VERTEX_POINT('',#104437); +#104437 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#104438 = LINE('',#104439,#104440); +#104439 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#104440 = VECTOR('',#104441,1.); +#104441 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104442 = ORIENTED_EDGE('',*,*,#104443,.T.); +#104443 = EDGE_CURVE('',#104436,#104444,#104446,.T.); +#104444 = VERTEX_POINT('',#104445); +#104445 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#104446 = LINE('',#104447,#104448); +#104447 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#104448 = VECTOR('',#104449,1.); +#104449 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104450 = ORIENTED_EDGE('',*,*,#104451,.T.); +#104451 = EDGE_CURVE('',#104444,#104452,#104454,.T.); +#104452 = VERTEX_POINT('',#104453); +#104453 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#104454 = LINE('',#104455,#104456); +#104455 = CARTESIAN_POINT('',(0.1,-5.715,0.2)); +#104456 = VECTOR('',#104457,1.); +#104457 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104458 = ORIENTED_EDGE('',*,*,#104459,.T.); +#104459 = EDGE_CURVE('',#104452,#104404,#104460,.T.); +#104460 = LINE('',#104461,#104462); +#104461 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#104462 = VECTOR('',#104463,1.); +#104463 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104464 = FACE_BOUND('',#104465,.F.); +#104465 = EDGE_LOOP('',(#104466,#104476,#104484,#104492,#104500,#104508, + #104516,#104524)); +#104466 = ORIENTED_EDGE('',*,*,#104467,.F.); +#104467 = EDGE_CURVE('',#104468,#104470,#104472,.T.); +#104468 = VERTEX_POINT('',#104469); +#104469 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104470 = VERTEX_POINT('',#104471); +#104471 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#104472 = LINE('',#104473,#104474); +#104473 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104474 = VECTOR('',#104475,1.); +#104475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104476 = ORIENTED_EDGE('',*,*,#104477,.T.); +#104477 = EDGE_CURVE('',#104468,#104478,#104480,.T.); +#104478 = VERTEX_POINT('',#104479); +#104479 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#104480 = LINE('',#104481,#104482); +#104481 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104482 = VECTOR('',#104483,1.); +#104483 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104484 = ORIENTED_EDGE('',*,*,#104485,.F.); +#104485 = EDGE_CURVE('',#104486,#104478,#104488,.T.); +#104486 = VERTEX_POINT('',#104487); +#104487 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#104488 = LINE('',#104489,#104490); +#104489 = CARTESIAN_POINT('',(-0.1,-4.445,0.2)); +#104490 = VECTOR('',#104491,1.); +#104491 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104492 = ORIENTED_EDGE('',*,*,#104493,.T.); +#104493 = EDGE_CURVE('',#104486,#104494,#104496,.T.); +#104494 = VERTEX_POINT('',#104495); +#104495 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#104496 = LINE('',#104497,#104498); +#104497 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104498 = VECTOR('',#104499,1.); +#104499 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104500 = ORIENTED_EDGE('',*,*,#104501,.T.); +#104501 = EDGE_CURVE('',#104494,#104502,#104504,.T.); +#104502 = VERTEX_POINT('',#104503); +#104503 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#104504 = LINE('',#104505,#104506); +#104505 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#104506 = VECTOR('',#104507,1.); +#104507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104508 = ORIENTED_EDGE('',*,*,#104509,.T.); +#104509 = EDGE_CURVE('',#104502,#104510,#104512,.T.); +#104510 = VERTEX_POINT('',#104511); +#104511 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#104512 = LINE('',#104513,#104514); +#104513 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#104514 = VECTOR('',#104515,1.); +#104515 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104516 = ORIENTED_EDGE('',*,*,#104517,.T.); +#104517 = EDGE_CURVE('',#104510,#104518,#104520,.T.); +#104518 = VERTEX_POINT('',#104519); +#104519 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#104520 = LINE('',#104521,#104522); +#104521 = CARTESIAN_POINT('',(0.1,-4.445,0.2)); +#104522 = VECTOR('',#104523,1.); +#104523 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104524 = ORIENTED_EDGE('',*,*,#104525,.T.); +#104525 = EDGE_CURVE('',#104518,#104470,#104526,.T.); +#104526 = LINE('',#104527,#104528); +#104527 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#104528 = VECTOR('',#104529,1.); +#104529 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104530 = PLANE('',#104531); +#104531 = AXIS2_PLACEMENT_3D('',#104532,#104533,#104534); +#104532 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,0.2)); +#104533 = DIRECTION('',(0.,0.,1.)); +#104534 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#104535 = ADVANCED_FACE('',(#104536),#104542,.T.); +#104536 = FACE_BOUND('',#104537,.T.); +#104537 = EDGE_LOOP('',(#104538,#104539,#104540,#104541)); +#104538 = ORIENTED_EDGE('',*,*,#103556,.T.); +#104539 = ORIENTED_EDGE('',*,*,#103994,.T.); +#104540 = ORIENTED_EDGE('',*,*,#103635,.F.); +#104541 = ORIENTED_EDGE('',*,*,#103652,.F.); +#104542 = PLANE('',#104543); +#104543 = AXIS2_PLACEMENT_3D('',#104544,#104545,#104546); +#104544 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#104545 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104546 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104547 = ADVANCED_FACE('',(#104548),#104554,.F.); +#104548 = FACE_BOUND('',#104549,.F.); +#104549 = EDGE_LOOP('',(#104550,#104551,#104552,#104553)); +#104550 = ORIENTED_EDGE('',*,*,#103603,.T.); +#104551 = ORIENTED_EDGE('',*,*,#103668,.T.); +#104552 = ORIENTED_EDGE('',*,*,#103533,.F.); +#104553 = ORIENTED_EDGE('',*,*,#103963,.F.); +#104554 = PLANE('',#104555); +#104555 = AXIS2_PLACEMENT_3D('',#104556,#104557,#104558); +#104556 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#104557 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104558 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104559 = ADVANCED_FACE('',(#104560),#104585,.T.); +#104560 = FACE_BOUND('',#104561,.T.); +#104561 = EDGE_LOOP('',(#104562,#104570,#104571,#104579)); +#104562 = ORIENTED_EDGE('',*,*,#104563,.F.); +#104563 = EDGE_CURVE('',#103678,#104564,#104566,.T.); +#104564 = VERTEX_POINT('',#104565); +#104565 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#104566 = LINE('',#104567,#104568); +#104567 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#104568 = VECTOR('',#104569,1.); +#104569 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104570 = ORIENTED_EDGE('',*,*,#103677,.T.); +#104571 = ORIENTED_EDGE('',*,*,#104572,.T.); +#104572 = EDGE_CURVE('',#103680,#104573,#104575,.T.); +#104573 = VERTEX_POINT('',#104574); +#104574 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#104575 = LINE('',#104576,#104577); +#104576 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#104577 = VECTOR('',#104578,1.); +#104578 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104579 = ORIENTED_EDGE('',*,*,#104580,.F.); +#104580 = EDGE_CURVE('',#104564,#104573,#104581,.T.); +#104581 = LINE('',#104582,#104583); +#104582 = CARTESIAN_POINT('',(0.3,-18.38,8.2)); +#104583 = VECTOR('',#104584,1.); +#104584 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104585 = PLANE('',#104586); +#104586 = AXIS2_PLACEMENT_3D('',#104587,#104588,#104589); +#104587 = CARTESIAN_POINT('',(0.45,-18.38,8.35)); +#104588 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104589 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104590 = ADVANCED_FACE('',(#104591),#104609,.T.); +#104591 = FACE_BOUND('',#104592,.T.); +#104592 = EDGE_LOOP('',(#104593,#104594,#104595,#104603)); +#104593 = ORIENTED_EDGE('',*,*,#104572,.F.); +#104594 = ORIENTED_EDGE('',*,*,#103703,.T.); +#104595 = ORIENTED_EDGE('',*,*,#104596,.T.); +#104596 = EDGE_CURVE('',#103696,#104597,#104599,.T.); +#104597 = VERTEX_POINT('',#104598); +#104598 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#104599 = LINE('',#104600,#104601); +#104600 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#104601 = VECTOR('',#104602,1.); +#104602 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104603 = ORIENTED_EDGE('',*,*,#104604,.F.); +#104604 = EDGE_CURVE('',#104573,#104597,#104605,.T.); +#104605 = LINE('',#104606,#104607); +#104606 = CARTESIAN_POINT('',(0.6,-17.48,8.2)); +#104607 = VECTOR('',#104608,1.); +#104608 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104609 = PLANE('',#104610); +#104610 = AXIS2_PLACEMENT_3D('',#104611,#104612,#104613); +#104611 = CARTESIAN_POINT('',(0.6,-17.33,8.35)); +#104612 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104613 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104614 = ADVANCED_FACE('',(#104615),#104633,.T.); +#104615 = FACE_BOUND('',#104616,.T.); +#104616 = EDGE_LOOP('',(#104617,#104618,#104619,#104627)); +#104617 = ORIENTED_EDGE('',*,*,#104596,.F.); +#104618 = ORIENTED_EDGE('',*,*,#103695,.T.); +#104619 = ORIENTED_EDGE('',*,*,#104620,.T.); +#104620 = EDGE_CURVE('',#103688,#104621,#104623,.T.); +#104621 = VERTEX_POINT('',#104622); +#104622 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#104623 = LINE('',#104624,#104625); +#104624 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#104625 = VECTOR('',#104626,1.); +#104626 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104627 = ORIENTED_EDGE('',*,*,#104628,.F.); +#104628 = EDGE_CURVE('',#104597,#104621,#104629,.T.); +#104629 = LINE('',#104630,#104631); +#104630 = CARTESIAN_POINT('',(-0.3,-17.18,8.2)); +#104631 = VECTOR('',#104632,1.); +#104632 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104633 = PLANE('',#104634); +#104634 = AXIS2_PLACEMENT_3D('',#104635,#104636,#104637); +#104635 = CARTESIAN_POINT('',(-0.45,-17.18,8.35)); +#104636 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104637 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104638 = ADVANCED_FACE('',(#104639),#104650,.T.); +#104639 = FACE_BOUND('',#104640,.T.); +#104640 = EDGE_LOOP('',(#104641,#104642,#104643,#104644)); +#104641 = ORIENTED_EDGE('',*,*,#104620,.F.); +#104642 = ORIENTED_EDGE('',*,*,#103687,.T.); +#104643 = ORIENTED_EDGE('',*,*,#104563,.T.); +#104644 = ORIENTED_EDGE('',*,*,#104645,.F.); +#104645 = EDGE_CURVE('',#104621,#104564,#104646,.T.); +#104646 = LINE('',#104647,#104648); +#104647 = CARTESIAN_POINT('',(-0.6,-18.08,8.2)); +#104648 = VECTOR('',#104649,1.); +#104649 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104650 = PLANE('',#104651); +#104651 = AXIS2_PLACEMENT_3D('',#104652,#104653,#104654); +#104652 = CARTESIAN_POINT('',(-0.6,-18.23,8.35)); +#104653 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104654 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104655 = ADVANCED_FACE('',(#104656),#104681,.T.); +#104656 = FACE_BOUND('',#104657,.T.); +#104657 = EDGE_LOOP('',(#104658,#104666,#104667,#104675)); +#104658 = ORIENTED_EDGE('',*,*,#104659,.F.); +#104659 = EDGE_CURVE('',#103712,#104660,#104662,.T.); +#104660 = VERTEX_POINT('',#104661); +#104661 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#104662 = LINE('',#104663,#104664); +#104663 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#104664 = VECTOR('',#104665,1.); +#104665 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104666 = ORIENTED_EDGE('',*,*,#103711,.T.); +#104667 = ORIENTED_EDGE('',*,*,#104668,.T.); +#104668 = EDGE_CURVE('',#103714,#104669,#104671,.T.); +#104669 = VERTEX_POINT('',#104670); +#104670 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#104671 = LINE('',#104672,#104673); +#104672 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#104673 = VECTOR('',#104674,1.); +#104674 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104675 = ORIENTED_EDGE('',*,*,#104676,.F.); +#104676 = EDGE_CURVE('',#104660,#104669,#104677,.T.); +#104677 = LINE('',#104678,#104679); +#104678 = CARTESIAN_POINT('',(0.3,-15.84,8.2)); +#104679 = VECTOR('',#104680,1.); +#104680 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104681 = PLANE('',#104682); +#104682 = AXIS2_PLACEMENT_3D('',#104683,#104684,#104685); +#104683 = CARTESIAN_POINT('',(0.45,-15.84,8.35)); +#104684 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104685 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104686 = ADVANCED_FACE('',(#104687),#104705,.T.); +#104687 = FACE_BOUND('',#104688,.T.); +#104688 = EDGE_LOOP('',(#104689,#104690,#104691,#104699)); +#104689 = ORIENTED_EDGE('',*,*,#104668,.F.); +#104690 = ORIENTED_EDGE('',*,*,#103737,.T.); +#104691 = ORIENTED_EDGE('',*,*,#104692,.T.); +#104692 = EDGE_CURVE('',#103730,#104693,#104695,.T.); +#104693 = VERTEX_POINT('',#104694); +#104694 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#104695 = LINE('',#104696,#104697); +#104696 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#104697 = VECTOR('',#104698,1.); +#104698 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104699 = ORIENTED_EDGE('',*,*,#104700,.F.); +#104700 = EDGE_CURVE('',#104669,#104693,#104701,.T.); +#104701 = LINE('',#104702,#104703); +#104702 = CARTESIAN_POINT('',(0.6,-14.94,8.2)); +#104703 = VECTOR('',#104704,1.); +#104704 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104705 = PLANE('',#104706); +#104706 = AXIS2_PLACEMENT_3D('',#104707,#104708,#104709); +#104707 = CARTESIAN_POINT('',(0.6,-14.79,8.35)); +#104708 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104709 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104710 = ADVANCED_FACE('',(#104711),#104729,.T.); +#104711 = FACE_BOUND('',#104712,.T.); +#104712 = EDGE_LOOP('',(#104713,#104714,#104715,#104723)); +#104713 = ORIENTED_EDGE('',*,*,#104692,.F.); +#104714 = ORIENTED_EDGE('',*,*,#103729,.T.); +#104715 = ORIENTED_EDGE('',*,*,#104716,.T.); +#104716 = EDGE_CURVE('',#103722,#104717,#104719,.T.); +#104717 = VERTEX_POINT('',#104718); +#104718 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#104719 = LINE('',#104720,#104721); +#104720 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#104721 = VECTOR('',#104722,1.); +#104722 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104723 = ORIENTED_EDGE('',*,*,#104724,.F.); +#104724 = EDGE_CURVE('',#104693,#104717,#104725,.T.); +#104725 = LINE('',#104726,#104727); +#104726 = CARTESIAN_POINT('',(-0.3,-14.64,8.2)); +#104727 = VECTOR('',#104728,1.); +#104728 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104729 = PLANE('',#104730); +#104730 = AXIS2_PLACEMENT_3D('',#104731,#104732,#104733); +#104731 = CARTESIAN_POINT('',(-0.45,-14.64,8.35)); +#104732 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104733 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104734 = ADVANCED_FACE('',(#104735),#104746,.T.); +#104735 = FACE_BOUND('',#104736,.T.); +#104736 = EDGE_LOOP('',(#104737,#104738,#104739,#104740)); +#104737 = ORIENTED_EDGE('',*,*,#104716,.F.); +#104738 = ORIENTED_EDGE('',*,*,#103721,.T.); +#104739 = ORIENTED_EDGE('',*,*,#104659,.T.); +#104740 = ORIENTED_EDGE('',*,*,#104741,.F.); +#104741 = EDGE_CURVE('',#104717,#104660,#104742,.T.); +#104742 = LINE('',#104743,#104744); +#104743 = CARTESIAN_POINT('',(-0.6,-15.54,8.2)); +#104744 = VECTOR('',#104745,1.); +#104745 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104746 = PLANE('',#104747); +#104747 = AXIS2_PLACEMENT_3D('',#104748,#104749,#104750); +#104748 = CARTESIAN_POINT('',(-0.6,-15.69,8.35)); +#104749 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104750 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104751 = ADVANCED_FACE('',(#104752),#104777,.T.); +#104752 = FACE_BOUND('',#104753,.T.); +#104753 = EDGE_LOOP('',(#104754,#104762,#104763,#104771)); +#104754 = ORIENTED_EDGE('',*,*,#104755,.F.); +#104755 = EDGE_CURVE('',#103746,#104756,#104758,.T.); +#104756 = VERTEX_POINT('',#104757); +#104757 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#104758 = LINE('',#104759,#104760); +#104759 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#104760 = VECTOR('',#104761,1.); +#104761 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104762 = ORIENTED_EDGE('',*,*,#103745,.T.); +#104763 = ORIENTED_EDGE('',*,*,#104764,.T.); +#104764 = EDGE_CURVE('',#103748,#104765,#104767,.T.); +#104765 = VERTEX_POINT('',#104766); +#104766 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#104767 = LINE('',#104768,#104769); +#104768 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#104769 = VECTOR('',#104770,1.); +#104770 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104771 = ORIENTED_EDGE('',*,*,#104772,.F.); +#104772 = EDGE_CURVE('',#104756,#104765,#104773,.T.); +#104773 = LINE('',#104774,#104775); +#104774 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#104775 = VECTOR('',#104776,1.); +#104776 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104777 = PLANE('',#104778); +#104778 = AXIS2_PLACEMENT_3D('',#104779,#104780,#104781); +#104779 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#104780 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104781 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104782 = ADVANCED_FACE('',(#104783),#104801,.T.); +#104783 = FACE_BOUND('',#104784,.T.); +#104784 = EDGE_LOOP('',(#104785,#104786,#104787,#104795)); +#104785 = ORIENTED_EDGE('',*,*,#104764,.F.); +#104786 = ORIENTED_EDGE('',*,*,#103771,.T.); +#104787 = ORIENTED_EDGE('',*,*,#104788,.T.); +#104788 = EDGE_CURVE('',#103764,#104789,#104791,.T.); +#104789 = VERTEX_POINT('',#104790); +#104790 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#104791 = LINE('',#104792,#104793); +#104792 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#104793 = VECTOR('',#104794,1.); +#104794 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104795 = ORIENTED_EDGE('',*,*,#104796,.F.); +#104796 = EDGE_CURVE('',#104765,#104789,#104797,.T.); +#104797 = LINE('',#104798,#104799); +#104798 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#104799 = VECTOR('',#104800,1.); +#104800 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104801 = PLANE('',#104802); +#104802 = AXIS2_PLACEMENT_3D('',#104803,#104804,#104805); +#104803 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#104804 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104805 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104806 = ADVANCED_FACE('',(#104807),#104825,.T.); +#104807 = FACE_BOUND('',#104808,.T.); +#104808 = EDGE_LOOP('',(#104809,#104810,#104811,#104819)); +#104809 = ORIENTED_EDGE('',*,*,#104788,.F.); +#104810 = ORIENTED_EDGE('',*,*,#103763,.T.); +#104811 = ORIENTED_EDGE('',*,*,#104812,.T.); +#104812 = EDGE_CURVE('',#103756,#104813,#104815,.T.); +#104813 = VERTEX_POINT('',#104814); +#104814 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#104815 = LINE('',#104816,#104817); +#104816 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#104817 = VECTOR('',#104818,1.); +#104818 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104819 = ORIENTED_EDGE('',*,*,#104820,.F.); +#104820 = EDGE_CURVE('',#104789,#104813,#104821,.T.); +#104821 = LINE('',#104822,#104823); +#104822 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#104823 = VECTOR('',#104824,1.); +#104824 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104825 = PLANE('',#104826); +#104826 = AXIS2_PLACEMENT_3D('',#104827,#104828,#104829); +#104827 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#104828 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104829 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104830 = ADVANCED_FACE('',(#104831),#104842,.T.); +#104831 = FACE_BOUND('',#104832,.T.); +#104832 = EDGE_LOOP('',(#104833,#104834,#104835,#104836)); +#104833 = ORIENTED_EDGE('',*,*,#104812,.F.); +#104834 = ORIENTED_EDGE('',*,*,#103755,.T.); +#104835 = ORIENTED_EDGE('',*,*,#104755,.T.); +#104836 = ORIENTED_EDGE('',*,*,#104837,.F.); +#104837 = EDGE_CURVE('',#104813,#104756,#104838,.T.); +#104838 = LINE('',#104839,#104840); +#104839 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#104840 = VECTOR('',#104841,1.); +#104841 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104842 = PLANE('',#104843); +#104843 = AXIS2_PLACEMENT_3D('',#104844,#104845,#104846); +#104844 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#104845 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104846 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104847 = ADVANCED_FACE('',(#104848),#104873,.T.); +#104848 = FACE_BOUND('',#104849,.T.); +#104849 = EDGE_LOOP('',(#104850,#104858,#104859,#104867)); +#104850 = ORIENTED_EDGE('',*,*,#104851,.F.); +#104851 = EDGE_CURVE('',#103780,#104852,#104854,.T.); +#104852 = VERTEX_POINT('',#104853); +#104853 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#104854 = LINE('',#104855,#104856); +#104855 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#104856 = VECTOR('',#104857,1.); +#104857 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104858 = ORIENTED_EDGE('',*,*,#103779,.T.); +#104859 = ORIENTED_EDGE('',*,*,#104860,.T.); +#104860 = EDGE_CURVE('',#103782,#104861,#104863,.T.); +#104861 = VERTEX_POINT('',#104862); +#104862 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#104863 = LINE('',#104864,#104865); +#104864 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#104865 = VECTOR('',#104866,1.); +#104866 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104867 = ORIENTED_EDGE('',*,*,#104868,.F.); +#104868 = EDGE_CURVE('',#104852,#104861,#104869,.T.); +#104869 = LINE('',#104870,#104871); +#104870 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#104871 = VECTOR('',#104872,1.); +#104872 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104873 = PLANE('',#104874); +#104874 = AXIS2_PLACEMENT_3D('',#104875,#104876,#104877); +#104875 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#104876 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104877 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104878 = ADVANCED_FACE('',(#104879),#104897,.T.); +#104879 = FACE_BOUND('',#104880,.T.); +#104880 = EDGE_LOOP('',(#104881,#104882,#104883,#104891)); +#104881 = ORIENTED_EDGE('',*,*,#104860,.F.); +#104882 = ORIENTED_EDGE('',*,*,#103805,.T.); +#104883 = ORIENTED_EDGE('',*,*,#104884,.T.); +#104884 = EDGE_CURVE('',#103798,#104885,#104887,.T.); +#104885 = VERTEX_POINT('',#104886); +#104886 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#104887 = LINE('',#104888,#104889); +#104888 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#104889 = VECTOR('',#104890,1.); +#104890 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104891 = ORIENTED_EDGE('',*,*,#104892,.F.); +#104892 = EDGE_CURVE('',#104861,#104885,#104893,.T.); +#104893 = LINE('',#104894,#104895); +#104894 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#104895 = VECTOR('',#104896,1.); +#104896 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104897 = PLANE('',#104898); +#104898 = AXIS2_PLACEMENT_3D('',#104899,#104900,#104901); +#104899 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#104900 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104901 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104902 = ADVANCED_FACE('',(#104903),#104921,.T.); +#104903 = FACE_BOUND('',#104904,.T.); +#104904 = EDGE_LOOP('',(#104905,#104906,#104907,#104915)); +#104905 = ORIENTED_EDGE('',*,*,#104884,.F.); +#104906 = ORIENTED_EDGE('',*,*,#103797,.T.); +#104907 = ORIENTED_EDGE('',*,*,#104908,.T.); +#104908 = EDGE_CURVE('',#103790,#104909,#104911,.T.); +#104909 = VERTEX_POINT('',#104910); +#104910 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#104911 = LINE('',#104912,#104913); +#104912 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#104913 = VECTOR('',#104914,1.); +#104914 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104915 = ORIENTED_EDGE('',*,*,#104916,.F.); +#104916 = EDGE_CURVE('',#104885,#104909,#104917,.T.); +#104917 = LINE('',#104918,#104919); +#104918 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#104919 = VECTOR('',#104920,1.); +#104920 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104921 = PLANE('',#104922); +#104922 = AXIS2_PLACEMENT_3D('',#104923,#104924,#104925); +#104923 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#104924 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104925 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104926 = ADVANCED_FACE('',(#104927),#104938,.T.); +#104927 = FACE_BOUND('',#104928,.T.); +#104928 = EDGE_LOOP('',(#104929,#104930,#104931,#104932)); +#104929 = ORIENTED_EDGE('',*,*,#104908,.F.); +#104930 = ORIENTED_EDGE('',*,*,#103789,.T.); +#104931 = ORIENTED_EDGE('',*,*,#104851,.T.); +#104932 = ORIENTED_EDGE('',*,*,#104933,.F.); +#104933 = EDGE_CURVE('',#104909,#104852,#104934,.T.); +#104934 = LINE('',#104935,#104936); +#104935 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#104936 = VECTOR('',#104937,1.); +#104937 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104938 = PLANE('',#104939); +#104939 = AXIS2_PLACEMENT_3D('',#104940,#104941,#104942); +#104940 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#104941 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104942 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104943 = ADVANCED_FACE('',(#104944),#104969,.T.); +#104944 = FACE_BOUND('',#104945,.T.); +#104945 = EDGE_LOOP('',(#104946,#104954,#104955,#104963)); +#104946 = ORIENTED_EDGE('',*,*,#104947,.F.); +#104947 = EDGE_CURVE('',#103814,#104948,#104950,.T.); +#104948 = VERTEX_POINT('',#104949); +#104949 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#104950 = LINE('',#104951,#104952); +#104951 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#104952 = VECTOR('',#104953,1.); +#104953 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104954 = ORIENTED_EDGE('',*,*,#103813,.T.); +#104955 = ORIENTED_EDGE('',*,*,#104956,.T.); +#104956 = EDGE_CURVE('',#103816,#104957,#104959,.T.); +#104957 = VERTEX_POINT('',#104958); +#104958 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#104959 = LINE('',#104960,#104961); +#104960 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#104961 = VECTOR('',#104962,1.); +#104962 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104963 = ORIENTED_EDGE('',*,*,#104964,.F.); +#104964 = EDGE_CURVE('',#104948,#104957,#104965,.T.); +#104965 = LINE('',#104966,#104967); +#104966 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#104967 = VECTOR('',#104968,1.); +#104968 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104969 = PLANE('',#104970); +#104970 = AXIS2_PLACEMENT_3D('',#104971,#104972,#104973); +#104971 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#104972 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104973 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104974 = ADVANCED_FACE('',(#104975),#104993,.T.); +#104975 = FACE_BOUND('',#104976,.T.); +#104976 = EDGE_LOOP('',(#104977,#104978,#104979,#104987)); +#104977 = ORIENTED_EDGE('',*,*,#104956,.F.); +#104978 = ORIENTED_EDGE('',*,*,#103839,.T.); +#104979 = ORIENTED_EDGE('',*,*,#104980,.T.); +#104980 = EDGE_CURVE('',#103832,#104981,#104983,.T.); +#104981 = VERTEX_POINT('',#104982); +#104982 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#104983 = LINE('',#104984,#104985); +#104984 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#104985 = VECTOR('',#104986,1.); +#104986 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104987 = ORIENTED_EDGE('',*,*,#104988,.F.); +#104988 = EDGE_CURVE('',#104957,#104981,#104989,.T.); +#104989 = LINE('',#104990,#104991); +#104990 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#104991 = VECTOR('',#104992,1.); +#104992 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104993 = PLANE('',#104994); +#104994 = AXIS2_PLACEMENT_3D('',#104995,#104996,#104997); +#104995 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#104996 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104997 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104998 = ADVANCED_FACE('',(#104999),#105017,.T.); +#104999 = FACE_BOUND('',#105000,.T.); +#105000 = EDGE_LOOP('',(#105001,#105002,#105003,#105011)); +#105001 = ORIENTED_EDGE('',*,*,#104980,.F.); +#105002 = ORIENTED_EDGE('',*,*,#103831,.T.); +#105003 = ORIENTED_EDGE('',*,*,#105004,.T.); +#105004 = EDGE_CURVE('',#103824,#105005,#105007,.T.); +#105005 = VERTEX_POINT('',#105006); +#105006 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#105007 = LINE('',#105008,#105009); +#105008 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#105009 = VECTOR('',#105010,1.); +#105010 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105011 = ORIENTED_EDGE('',*,*,#105012,.F.); +#105012 = EDGE_CURVE('',#104981,#105005,#105013,.T.); +#105013 = LINE('',#105014,#105015); +#105014 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#105015 = VECTOR('',#105016,1.); +#105016 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105017 = PLANE('',#105018); +#105018 = AXIS2_PLACEMENT_3D('',#105019,#105020,#105021); +#105019 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#105020 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105021 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105022 = ADVANCED_FACE('',(#105023),#105034,.T.); +#105023 = FACE_BOUND('',#105024,.T.); +#105024 = EDGE_LOOP('',(#105025,#105026,#105027,#105028)); +#105025 = ORIENTED_EDGE('',*,*,#105004,.F.); +#105026 = ORIENTED_EDGE('',*,*,#103823,.T.); +#105027 = ORIENTED_EDGE('',*,*,#104947,.T.); +#105028 = ORIENTED_EDGE('',*,*,#105029,.F.); +#105029 = EDGE_CURVE('',#105005,#104948,#105030,.T.); +#105030 = LINE('',#105031,#105032); +#105031 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#105032 = VECTOR('',#105033,1.); +#105033 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105034 = PLANE('',#105035); +#105035 = AXIS2_PLACEMENT_3D('',#105036,#105037,#105038); +#105036 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#105037 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105038 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105039 = ADVANCED_FACE('',(#105040),#105065,.T.); +#105040 = FACE_BOUND('',#105041,.T.); +#105041 = EDGE_LOOP('',(#105042,#105050,#105051,#105059)); +#105042 = ORIENTED_EDGE('',*,*,#105043,.F.); +#105043 = EDGE_CURVE('',#103848,#105044,#105046,.T.); +#105044 = VERTEX_POINT('',#105045); +#105045 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#105046 = LINE('',#105047,#105048); +#105047 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#105048 = VECTOR('',#105049,1.); +#105049 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#105050 = ORIENTED_EDGE('',*,*,#103847,.T.); +#105051 = ORIENTED_EDGE('',*,*,#105052,.T.); +#105052 = EDGE_CURVE('',#103850,#105053,#105055,.T.); +#105053 = VERTEX_POINT('',#105054); +#105054 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#105055 = LINE('',#105056,#105057); +#105056 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#105057 = VECTOR('',#105058,1.); +#105058 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#105059 = ORIENTED_EDGE('',*,*,#105060,.F.); +#105060 = EDGE_CURVE('',#105044,#105053,#105061,.T.); +#105061 = LINE('',#105062,#105063); +#105062 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#105063 = VECTOR('',#105064,1.); +#105064 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105065 = PLANE('',#105066); +#105066 = AXIS2_PLACEMENT_3D('',#105067,#105068,#105069); +#105067 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#105068 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#105069 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#105070 = ADVANCED_FACE('',(#105071),#105089,.T.); +#105071 = FACE_BOUND('',#105072,.T.); +#105072 = EDGE_LOOP('',(#105073,#105074,#105075,#105083)); +#105073 = ORIENTED_EDGE('',*,*,#105052,.F.); +#105074 = ORIENTED_EDGE('',*,*,#103873,.T.); +#105075 = ORIENTED_EDGE('',*,*,#105076,.T.); +#105076 = EDGE_CURVE('',#103866,#105077,#105079,.T.); +#105077 = VERTEX_POINT('',#105078); +#105078 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#105079 = LINE('',#105080,#105081); +#105080 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#105081 = VECTOR('',#105082,1.); +#105082 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#105083 = ORIENTED_EDGE('',*,*,#105084,.F.); +#105084 = EDGE_CURVE('',#105053,#105077,#105085,.T.); +#105085 = LINE('',#105086,#105087); +#105086 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#105087 = VECTOR('',#105088,1.); +#105088 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105089 = PLANE('',#105090); +#105090 = AXIS2_PLACEMENT_3D('',#105091,#105092,#105093); +#105091 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#105092 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#105093 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#105094 = ADVANCED_FACE('',(#105095),#105113,.T.); +#105095 = FACE_BOUND('',#105096,.T.); +#105096 = EDGE_LOOP('',(#105097,#105098,#105099,#105107)); +#105097 = ORIENTED_EDGE('',*,*,#105076,.F.); +#105098 = ORIENTED_EDGE('',*,*,#103865,.T.); +#105099 = ORIENTED_EDGE('',*,*,#105100,.T.); +#105100 = EDGE_CURVE('',#103858,#105101,#105103,.T.); +#105101 = VERTEX_POINT('',#105102); +#105102 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#105103 = LINE('',#105104,#105105); +#105104 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#105105 = VECTOR('',#105106,1.); +#105106 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105107 = ORIENTED_EDGE('',*,*,#105108,.F.); +#105108 = EDGE_CURVE('',#105077,#105101,#105109,.T.); +#105109 = LINE('',#105110,#105111); +#105110 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#105111 = VECTOR('',#105112,1.); +#105112 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105113 = PLANE('',#105114); +#105114 = AXIS2_PLACEMENT_3D('',#105115,#105116,#105117); +#105115 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#105116 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105117 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105118 = ADVANCED_FACE('',(#105119),#105130,.T.); +#105119 = FACE_BOUND('',#105120,.T.); +#105120 = EDGE_LOOP('',(#105121,#105122,#105123,#105124)); +#105121 = ORIENTED_EDGE('',*,*,#105100,.F.); +#105122 = ORIENTED_EDGE('',*,*,#103857,.T.); +#105123 = ORIENTED_EDGE('',*,*,#105043,.T.); +#105124 = ORIENTED_EDGE('',*,*,#105125,.F.); +#105125 = EDGE_CURVE('',#105101,#105044,#105126,.T.); +#105126 = LINE('',#105127,#105128); +#105127 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#105128 = VECTOR('',#105129,1.); +#105129 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105130 = PLANE('',#105131); +#105131 = AXIS2_PLACEMENT_3D('',#105132,#105133,#105134); +#105132 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#105133 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105134 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105135 = ADVANCED_FACE('',(#105136),#105161,.T.); +#105136 = FACE_BOUND('',#105137,.T.); +#105137 = EDGE_LOOP('',(#105138,#105146,#105147,#105155)); +#105138 = ORIENTED_EDGE('',*,*,#105139,.F.); +#105139 = EDGE_CURVE('',#103882,#105140,#105142,.T.); +#105140 = VERTEX_POINT('',#105141); +#105141 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#105142 = LINE('',#105143,#105144); +#105143 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#105144 = VECTOR('',#105145,1.); +#105145 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#105146 = ORIENTED_EDGE('',*,*,#103881,.T.); +#105147 = ORIENTED_EDGE('',*,*,#105148,.T.); +#105148 = EDGE_CURVE('',#103884,#105149,#105151,.T.); +#105149 = VERTEX_POINT('',#105150); +#105150 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#105151 = LINE('',#105152,#105153); +#105152 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#105153 = VECTOR('',#105154,1.); +#105154 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#105155 = ORIENTED_EDGE('',*,*,#105156,.F.); +#105156 = EDGE_CURVE('',#105140,#105149,#105157,.T.); +#105157 = LINE('',#105158,#105159); +#105158 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#105159 = VECTOR('',#105160,1.); +#105160 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105161 = PLANE('',#105162); +#105162 = AXIS2_PLACEMENT_3D('',#105163,#105164,#105165); +#105163 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#105164 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#105165 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#105166 = ADVANCED_FACE('',(#105167),#105185,.T.); +#105167 = FACE_BOUND('',#105168,.T.); +#105168 = EDGE_LOOP('',(#105169,#105170,#105171,#105179)); +#105169 = ORIENTED_EDGE('',*,*,#105148,.F.); +#105170 = ORIENTED_EDGE('',*,*,#103907,.T.); +#105171 = ORIENTED_EDGE('',*,*,#105172,.T.); +#105172 = EDGE_CURVE('',#103900,#105173,#105175,.T.); +#105173 = VERTEX_POINT('',#105174); +#105174 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#105175 = LINE('',#105176,#105177); +#105176 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#105177 = VECTOR('',#105178,1.); +#105178 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#105179 = ORIENTED_EDGE('',*,*,#105180,.F.); +#105180 = EDGE_CURVE('',#105149,#105173,#105181,.T.); +#105181 = LINE('',#105182,#105183); +#105182 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#105183 = VECTOR('',#105184,1.); +#105184 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105185 = PLANE('',#105186); +#105186 = AXIS2_PLACEMENT_3D('',#105187,#105188,#105189); +#105187 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#105188 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#105189 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#105190 = ADVANCED_FACE('',(#105191),#105209,.T.); +#105191 = FACE_BOUND('',#105192,.T.); +#105192 = EDGE_LOOP('',(#105193,#105194,#105195,#105203)); +#105193 = ORIENTED_EDGE('',*,*,#105172,.F.); +#105194 = ORIENTED_EDGE('',*,*,#103899,.T.); +#105195 = ORIENTED_EDGE('',*,*,#105196,.T.); +#105196 = EDGE_CURVE('',#103892,#105197,#105199,.T.); +#105197 = VERTEX_POINT('',#105198); +#105198 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#105199 = LINE('',#105200,#105201); +#105200 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#105201 = VECTOR('',#105202,1.); +#105202 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105203 = ORIENTED_EDGE('',*,*,#105204,.F.); +#105204 = EDGE_CURVE('',#105173,#105197,#105205,.T.); +#105205 = LINE('',#105206,#105207); +#105206 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#105207 = VECTOR('',#105208,1.); +#105208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105209 = PLANE('',#105210); +#105210 = AXIS2_PLACEMENT_3D('',#105211,#105212,#105213); +#105211 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#105212 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105213 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105214 = ADVANCED_FACE('',(#105215),#105226,.T.); +#105215 = FACE_BOUND('',#105216,.T.); +#105216 = EDGE_LOOP('',(#105217,#105218,#105219,#105220)); +#105217 = ORIENTED_EDGE('',*,*,#105196,.F.); +#105218 = ORIENTED_EDGE('',*,*,#103891,.T.); +#105219 = ORIENTED_EDGE('',*,*,#105139,.T.); +#105220 = ORIENTED_EDGE('',*,*,#105221,.F.); +#105221 = EDGE_CURVE('',#105197,#105140,#105222,.T.); +#105222 = LINE('',#105223,#105224); +#105223 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#105224 = VECTOR('',#105225,1.); +#105225 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105226 = PLANE('',#105227); +#105227 = AXIS2_PLACEMENT_3D('',#105228,#105229,#105230); +#105228 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#105229 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105230 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105231 = ADVANCED_FACE('',(#105232),#105257,.T.); +#105232 = FACE_BOUND('',#105233,.T.); +#105233 = EDGE_LOOP('',(#105234,#105242,#105243,#105251)); +#105234 = ORIENTED_EDGE('',*,*,#105235,.F.); +#105235 = EDGE_CURVE('',#103916,#105236,#105238,.T.); +#105236 = VERTEX_POINT('',#105237); +#105237 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#105238 = LINE('',#105239,#105240); +#105239 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#105240 = VECTOR('',#105241,1.); +#105241 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#105242 = ORIENTED_EDGE('',*,*,#103915,.T.); +#105243 = ORIENTED_EDGE('',*,*,#105244,.T.); +#105244 = EDGE_CURVE('',#103918,#105245,#105247,.T.); +#105245 = VERTEX_POINT('',#105246); +#105246 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#105247 = LINE('',#105248,#105249); +#105248 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#105249 = VECTOR('',#105250,1.); +#105250 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#105251 = ORIENTED_EDGE('',*,*,#105252,.F.); +#105252 = EDGE_CURVE('',#105236,#105245,#105253,.T.); +#105253 = LINE('',#105254,#105255); +#105254 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#105255 = VECTOR('',#105256,1.); +#105256 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105257 = PLANE('',#105258); +#105258 = AXIS2_PLACEMENT_3D('',#105259,#105260,#105261); +#105259 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#105260 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#105261 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#105262 = ADVANCED_FACE('',(#105263),#105281,.T.); +#105263 = FACE_BOUND('',#105264,.T.); +#105264 = EDGE_LOOP('',(#105265,#105266,#105267,#105275)); +#105265 = ORIENTED_EDGE('',*,*,#105244,.F.); +#105266 = ORIENTED_EDGE('',*,*,#103941,.T.); +#105267 = ORIENTED_EDGE('',*,*,#105268,.T.); +#105268 = EDGE_CURVE('',#103934,#105269,#105271,.T.); +#105269 = VERTEX_POINT('',#105270); +#105270 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#105271 = LINE('',#105272,#105273); +#105272 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#105273 = VECTOR('',#105274,1.); +#105274 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#105275 = ORIENTED_EDGE('',*,*,#105276,.F.); +#105276 = EDGE_CURVE('',#105245,#105269,#105277,.T.); +#105277 = LINE('',#105278,#105279); +#105278 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#105279 = VECTOR('',#105280,1.); +#105280 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105281 = PLANE('',#105282); +#105282 = AXIS2_PLACEMENT_3D('',#105283,#105284,#105285); +#105283 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#105284 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#105285 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#105286 = ADVANCED_FACE('',(#105287),#105305,.T.); +#105287 = FACE_BOUND('',#105288,.T.); +#105288 = EDGE_LOOP('',(#105289,#105290,#105291,#105299)); +#105289 = ORIENTED_EDGE('',*,*,#105268,.F.); +#105290 = ORIENTED_EDGE('',*,*,#103933,.T.); +#105291 = ORIENTED_EDGE('',*,*,#105292,.T.); +#105292 = EDGE_CURVE('',#103926,#105293,#105295,.T.); +#105293 = VERTEX_POINT('',#105294); +#105294 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#105295 = LINE('',#105296,#105297); +#105296 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#105297 = VECTOR('',#105298,1.); +#105298 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105299 = ORIENTED_EDGE('',*,*,#105300,.F.); +#105300 = EDGE_CURVE('',#105269,#105293,#105301,.T.); +#105301 = LINE('',#105302,#105303); +#105302 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#105303 = VECTOR('',#105304,1.); +#105304 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105305 = PLANE('',#105306); +#105306 = AXIS2_PLACEMENT_3D('',#105307,#105308,#105309); +#105307 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#105308 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105309 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105310 = ADVANCED_FACE('',(#105311),#105322,.T.); +#105311 = FACE_BOUND('',#105312,.T.); +#105312 = EDGE_LOOP('',(#105313,#105314,#105315,#105316)); +#105313 = ORIENTED_EDGE('',*,*,#105292,.F.); +#105314 = ORIENTED_EDGE('',*,*,#103925,.T.); +#105315 = ORIENTED_EDGE('',*,*,#105235,.T.); +#105316 = ORIENTED_EDGE('',*,*,#105317,.F.); +#105317 = EDGE_CURVE('',#105293,#105236,#105318,.T.); +#105318 = LINE('',#105319,#105320); +#105319 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#105320 = VECTOR('',#105321,1.); +#105321 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105322 = PLANE('',#105323); +#105323 = AXIS2_PLACEMENT_3D('',#105324,#105325,#105326); +#105324 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#105325 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105326 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105327 = ADVANCED_FACE('',(#105328),#105339,.T.); +#105328 = FACE_BOUND('',#105329,.T.); +#105329 = EDGE_LOOP('',(#105330,#105331,#105332,#105338)); +#105330 = ORIENTED_EDGE('',*,*,#104005,.F.); +#105331 = ORIENTED_EDGE('',*,*,#104015,.T.); +#105332 = ORIENTED_EDGE('',*,*,#105333,.T.); +#105333 = EDGE_CURVE('',#104016,#104056,#105334,.T.); +#105334 = LINE('',#105335,#105336); +#105335 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#105336 = VECTOR('',#105337,1.); +#105337 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105338 = ORIENTED_EDGE('',*,*,#104063,.T.); +#105339 = PLANE('',#105340); +#105340 = AXIS2_PLACEMENT_3D('',#105341,#105342,#105343); +#105341 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#105342 = DIRECTION('',(0.,-0.,-1.)); +#105343 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105344 = ADVANCED_FACE('',(#105345),#105386,.F.); +#105345 = FACE_BOUND('',#105346,.F.); +#105346 = EDGE_LOOP('',(#105347,#105355,#105356,#105364,#105372,#105380) + ); +#105347 = ORIENTED_EDGE('',*,*,#105348,.T.); +#105348 = EDGE_CURVE('',#105349,#104056,#105351,.T.); +#105349 = VERTEX_POINT('',#105350); +#105350 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#105351 = LINE('',#105352,#105353); +#105352 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#105353 = VECTOR('',#105354,1.); +#105354 = DIRECTION('',(0.,0.,1.)); +#105355 = ORIENTED_EDGE('',*,*,#104055,.F.); +#105356 = ORIENTED_EDGE('',*,*,#105357,.T.); +#105357 = EDGE_CURVE('',#104048,#105358,#105360,.T.); +#105358 = VERTEX_POINT('',#105359); +#105359 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#105360 = LINE('',#105361,#105362); +#105361 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#105362 = VECTOR('',#105363,1.); +#105363 = DIRECTION('',(0.,0.,-1.)); +#105364 = ORIENTED_EDGE('',*,*,#105365,.T.); +#105365 = EDGE_CURVE('',#105358,#105366,#105368,.T.); +#105366 = VERTEX_POINT('',#105367); +#105367 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#105368 = LINE('',#105369,#105370); +#105369 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#105370 = VECTOR('',#105371,1.); +#105371 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105372 = ORIENTED_EDGE('',*,*,#105373,.T.); +#105373 = EDGE_CURVE('',#105366,#105374,#105376,.T.); +#105374 = VERTEX_POINT('',#105375); +#105375 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#105376 = LINE('',#105377,#105378); +#105377 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#105378 = VECTOR('',#105379,1.); +#105379 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105380 = ORIENTED_EDGE('',*,*,#105381,.T.); +#105381 = EDGE_CURVE('',#105374,#105349,#105382,.T.); +#105382 = LINE('',#105383,#105384); +#105383 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#105384 = VECTOR('',#105385,1.); +#105385 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105386 = PLANE('',#105387); +#105387 = AXIS2_PLACEMENT_3D('',#105388,#105389,#105390); +#105388 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#105389 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105390 = DIRECTION('',(0.,0.,1.)); +#105391 = ADVANCED_FACE('',(#105392),#105403,.T.); +#105392 = FACE_BOUND('',#105393,.T.); +#105393 = EDGE_LOOP('',(#105394,#105400,#105401,#105402)); +#105394 = ORIENTED_EDGE('',*,*,#105395,.F.); +#105395 = EDGE_CURVE('',#104024,#104048,#105396,.T.); +#105396 = LINE('',#105397,#105398); +#105397 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#105398 = VECTOR('',#105399,1.); +#105399 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105400 = ORIENTED_EDGE('',*,*,#104031,.T.); +#105401 = ORIENTED_EDGE('',*,*,#104039,.T.); +#105402 = ORIENTED_EDGE('',*,*,#104047,.T.); +#105403 = PLANE('',#105404); +#105404 = AXIS2_PLACEMENT_3D('',#105405,#105406,#105407); +#105405 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#105406 = DIRECTION('',(0.,-0.,-1.)); +#105407 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105408 = ADVANCED_FACE('',(#105409),#105450,.T.); +#105409 = FACE_BOUND('',#105410,.T.); +#105410 = EDGE_LOOP('',(#105411,#105419,#105420,#105428,#105436,#105444) + ); +#105411 = ORIENTED_EDGE('',*,*,#105412,.T.); +#105412 = EDGE_CURVE('',#105413,#104016,#105415,.T.); +#105413 = VERTEX_POINT('',#105414); +#105414 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#105415 = LINE('',#105416,#105417); +#105416 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#105417 = VECTOR('',#105418,1.); +#105418 = DIRECTION('',(0.,0.,1.)); +#105419 = ORIENTED_EDGE('',*,*,#104023,.F.); +#105420 = ORIENTED_EDGE('',*,*,#105421,.T.); +#105421 = EDGE_CURVE('',#104024,#105422,#105424,.T.); +#105422 = VERTEX_POINT('',#105423); +#105423 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#105424 = LINE('',#105425,#105426); +#105425 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#105426 = VECTOR('',#105427,1.); +#105427 = DIRECTION('',(0.,0.,-1.)); +#105428 = ORIENTED_EDGE('',*,*,#105429,.T.); +#105429 = EDGE_CURVE('',#105422,#105430,#105432,.T.); +#105430 = VERTEX_POINT('',#105431); +#105431 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#105432 = LINE('',#105433,#105434); +#105433 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#105434 = VECTOR('',#105435,1.); +#105435 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105436 = ORIENTED_EDGE('',*,*,#105437,.F.); +#105437 = EDGE_CURVE('',#105438,#105430,#105440,.T.); +#105438 = VERTEX_POINT('',#105439); +#105439 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#105440 = LINE('',#105441,#105442); +#105441 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#105442 = VECTOR('',#105443,1.); +#105443 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105444 = ORIENTED_EDGE('',*,*,#105445,.T.); +#105445 = EDGE_CURVE('',#105438,#105413,#105446,.T.); +#105446 = LINE('',#105447,#105448); +#105447 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#105448 = VECTOR('',#105449,1.); +#105449 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105450 = PLANE('',#105451); +#105451 = AXIS2_PLACEMENT_3D('',#105452,#105453,#105454); +#105452 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#105453 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105454 = DIRECTION('',(0.,0.,1.)); +#105455 = ADVANCED_FACE('',(#105456),#105467,.T.); +#105456 = FACE_BOUND('',#105457,.T.); +#105457 = EDGE_LOOP('',(#105458,#105459,#105460,#105466)); +#105458 = ORIENTED_EDGE('',*,*,#104071,.F.); +#105459 = ORIENTED_EDGE('',*,*,#104081,.T.); +#105460 = ORIENTED_EDGE('',*,*,#105461,.T.); +#105461 = EDGE_CURVE('',#104082,#104122,#105462,.T.); +#105462 = LINE('',#105463,#105464); +#105463 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#105464 = VECTOR('',#105465,1.); +#105465 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105466 = ORIENTED_EDGE('',*,*,#104129,.T.); +#105467 = PLANE('',#105468); +#105468 = AXIS2_PLACEMENT_3D('',#105469,#105470,#105471); +#105469 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#105470 = DIRECTION('',(0.,-0.,-1.)); +#105471 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105472 = ADVANCED_FACE('',(#105473),#105514,.F.); +#105473 = FACE_BOUND('',#105474,.F.); +#105474 = EDGE_LOOP('',(#105475,#105483,#105484,#105492,#105500,#105508) + ); +#105475 = ORIENTED_EDGE('',*,*,#105476,.T.); +#105476 = EDGE_CURVE('',#105477,#104122,#105479,.T.); +#105477 = VERTEX_POINT('',#105478); +#105478 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#105479 = LINE('',#105480,#105481); +#105480 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#105481 = VECTOR('',#105482,1.); +#105482 = DIRECTION('',(0.,0.,1.)); +#105483 = ORIENTED_EDGE('',*,*,#104121,.F.); +#105484 = ORIENTED_EDGE('',*,*,#105485,.T.); +#105485 = EDGE_CURVE('',#104114,#105486,#105488,.T.); +#105486 = VERTEX_POINT('',#105487); +#105487 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#105488 = LINE('',#105489,#105490); +#105489 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#105490 = VECTOR('',#105491,1.); +#105491 = DIRECTION('',(0.,0.,-1.)); +#105492 = ORIENTED_EDGE('',*,*,#105493,.T.); +#105493 = EDGE_CURVE('',#105486,#105494,#105496,.T.); +#105494 = VERTEX_POINT('',#105495); +#105495 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#105496 = LINE('',#105497,#105498); +#105497 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#105498 = VECTOR('',#105499,1.); +#105499 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105500 = ORIENTED_EDGE('',*,*,#105501,.T.); +#105501 = EDGE_CURVE('',#105494,#105502,#105504,.T.); +#105502 = VERTEX_POINT('',#105503); +#105503 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#105504 = LINE('',#105505,#105506); +#105505 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#105506 = VECTOR('',#105507,1.); +#105507 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105508 = ORIENTED_EDGE('',*,*,#105509,.T.); +#105509 = EDGE_CURVE('',#105502,#105477,#105510,.T.); +#105510 = LINE('',#105511,#105512); +#105511 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#105512 = VECTOR('',#105513,1.); +#105513 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105514 = PLANE('',#105515); +#105515 = AXIS2_PLACEMENT_3D('',#105516,#105517,#105518); +#105516 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#105517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105518 = DIRECTION('',(0.,0.,1.)); +#105519 = ADVANCED_FACE('',(#105520),#105531,.T.); +#105520 = FACE_BOUND('',#105521,.T.); +#105521 = EDGE_LOOP('',(#105522,#105528,#105529,#105530)); +#105522 = ORIENTED_EDGE('',*,*,#105523,.F.); +#105523 = EDGE_CURVE('',#104090,#104114,#105524,.T.); +#105524 = LINE('',#105525,#105526); +#105525 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#105526 = VECTOR('',#105527,1.); +#105527 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105528 = ORIENTED_EDGE('',*,*,#104097,.T.); +#105529 = ORIENTED_EDGE('',*,*,#104105,.T.); +#105530 = ORIENTED_EDGE('',*,*,#104113,.T.); +#105531 = PLANE('',#105532); +#105532 = AXIS2_PLACEMENT_3D('',#105533,#105534,#105535); +#105533 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#105534 = DIRECTION('',(0.,-0.,-1.)); +#105535 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105536 = ADVANCED_FACE('',(#105537),#105578,.T.); +#105537 = FACE_BOUND('',#105538,.T.); +#105538 = EDGE_LOOP('',(#105539,#105547,#105548,#105556,#105564,#105572) + ); +#105539 = ORIENTED_EDGE('',*,*,#105540,.T.); +#105540 = EDGE_CURVE('',#105541,#104082,#105543,.T.); +#105541 = VERTEX_POINT('',#105542); +#105542 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#105543 = LINE('',#105544,#105545); +#105544 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#105545 = VECTOR('',#105546,1.); +#105546 = DIRECTION('',(0.,0.,1.)); +#105547 = ORIENTED_EDGE('',*,*,#104089,.F.); +#105548 = ORIENTED_EDGE('',*,*,#105549,.T.); +#105549 = EDGE_CURVE('',#104090,#105550,#105552,.T.); +#105550 = VERTEX_POINT('',#105551); +#105551 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#105552 = LINE('',#105553,#105554); +#105553 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#105554 = VECTOR('',#105555,1.); +#105555 = DIRECTION('',(0.,0.,-1.)); +#105556 = ORIENTED_EDGE('',*,*,#105557,.T.); +#105557 = EDGE_CURVE('',#105550,#105558,#105560,.T.); +#105558 = VERTEX_POINT('',#105559); +#105559 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#105560 = LINE('',#105561,#105562); +#105561 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#105562 = VECTOR('',#105563,1.); +#105563 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105564 = ORIENTED_EDGE('',*,*,#105565,.F.); +#105565 = EDGE_CURVE('',#105566,#105558,#105568,.T.); +#105566 = VERTEX_POINT('',#105567); +#105567 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#105568 = LINE('',#105569,#105570); +#105569 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#105570 = VECTOR('',#105571,1.); +#105571 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105572 = ORIENTED_EDGE('',*,*,#105573,.T.); +#105573 = EDGE_CURVE('',#105566,#105541,#105574,.T.); +#105574 = LINE('',#105575,#105576); +#105575 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#105576 = VECTOR('',#105577,1.); +#105577 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105578 = PLANE('',#105579); +#105579 = AXIS2_PLACEMENT_3D('',#105580,#105581,#105582); +#105580 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#105581 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105582 = DIRECTION('',(0.,0.,1.)); +#105583 = ADVANCED_FACE('',(#105584),#105595,.T.); +#105584 = FACE_BOUND('',#105585,.T.); +#105585 = EDGE_LOOP('',(#105586,#105587,#105588,#105594)); +#105586 = ORIENTED_EDGE('',*,*,#104137,.F.); +#105587 = ORIENTED_EDGE('',*,*,#104147,.T.); +#105588 = ORIENTED_EDGE('',*,*,#105589,.T.); +#105589 = EDGE_CURVE('',#104148,#104188,#105590,.T.); +#105590 = LINE('',#105591,#105592); +#105591 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#105592 = VECTOR('',#105593,1.); +#105593 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105594 = ORIENTED_EDGE('',*,*,#104195,.T.); +#105595 = PLANE('',#105596); +#105596 = AXIS2_PLACEMENT_3D('',#105597,#105598,#105599); +#105597 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#105598 = DIRECTION('',(0.,-0.,-1.)); +#105599 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105600 = ADVANCED_FACE('',(#105601),#105642,.F.); +#105601 = FACE_BOUND('',#105602,.F.); +#105602 = EDGE_LOOP('',(#105603,#105611,#105612,#105620,#105628,#105636) + ); +#105603 = ORIENTED_EDGE('',*,*,#105604,.T.); +#105604 = EDGE_CURVE('',#105605,#104188,#105607,.T.); +#105605 = VERTEX_POINT('',#105606); +#105606 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#105607 = LINE('',#105608,#105609); +#105608 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#105609 = VECTOR('',#105610,1.); +#105610 = DIRECTION('',(0.,0.,1.)); +#105611 = ORIENTED_EDGE('',*,*,#104187,.F.); +#105612 = ORIENTED_EDGE('',*,*,#105613,.T.); +#105613 = EDGE_CURVE('',#104180,#105614,#105616,.T.); +#105614 = VERTEX_POINT('',#105615); +#105615 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#105616 = LINE('',#105617,#105618); +#105617 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#105618 = VECTOR('',#105619,1.); +#105619 = DIRECTION('',(0.,0.,-1.)); +#105620 = ORIENTED_EDGE('',*,*,#105621,.T.); +#105621 = EDGE_CURVE('',#105614,#105622,#105624,.T.); +#105622 = VERTEX_POINT('',#105623); +#105623 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#105624 = LINE('',#105625,#105626); +#105625 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#105626 = VECTOR('',#105627,1.); +#105627 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105628 = ORIENTED_EDGE('',*,*,#105629,.T.); +#105629 = EDGE_CURVE('',#105622,#105630,#105632,.T.); +#105630 = VERTEX_POINT('',#105631); +#105631 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#105632 = LINE('',#105633,#105634); +#105633 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#105634 = VECTOR('',#105635,1.); +#105635 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105636 = ORIENTED_EDGE('',*,*,#105637,.T.); +#105637 = EDGE_CURVE('',#105630,#105605,#105638,.T.); +#105638 = LINE('',#105639,#105640); +#105639 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#105640 = VECTOR('',#105641,1.); +#105641 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105642 = PLANE('',#105643); +#105643 = AXIS2_PLACEMENT_3D('',#105644,#105645,#105646); +#105644 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#105645 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105646 = DIRECTION('',(0.,0.,1.)); +#105647 = ADVANCED_FACE('',(#105648),#105659,.T.); +#105648 = FACE_BOUND('',#105649,.T.); +#105649 = EDGE_LOOP('',(#105650,#105656,#105657,#105658)); +#105650 = ORIENTED_EDGE('',*,*,#105651,.F.); +#105651 = EDGE_CURVE('',#104156,#104180,#105652,.T.); +#105652 = LINE('',#105653,#105654); +#105653 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#105654 = VECTOR('',#105655,1.); +#105655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105656 = ORIENTED_EDGE('',*,*,#104163,.T.); +#105657 = ORIENTED_EDGE('',*,*,#104171,.T.); +#105658 = ORIENTED_EDGE('',*,*,#104179,.T.); +#105659 = PLANE('',#105660); +#105660 = AXIS2_PLACEMENT_3D('',#105661,#105662,#105663); +#105661 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#105662 = DIRECTION('',(0.,-0.,-1.)); +#105663 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105664 = ADVANCED_FACE('',(#105665),#105706,.T.); +#105665 = FACE_BOUND('',#105666,.T.); +#105666 = EDGE_LOOP('',(#105667,#105675,#105676,#105684,#105692,#105700) + ); +#105667 = ORIENTED_EDGE('',*,*,#105668,.T.); +#105668 = EDGE_CURVE('',#105669,#104148,#105671,.T.); +#105669 = VERTEX_POINT('',#105670); +#105670 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#105671 = LINE('',#105672,#105673); +#105672 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#105673 = VECTOR('',#105674,1.); +#105674 = DIRECTION('',(0.,0.,1.)); +#105675 = ORIENTED_EDGE('',*,*,#104155,.F.); +#105676 = ORIENTED_EDGE('',*,*,#105677,.T.); +#105677 = EDGE_CURVE('',#104156,#105678,#105680,.T.); +#105678 = VERTEX_POINT('',#105679); +#105679 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#105680 = LINE('',#105681,#105682); +#105681 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#105682 = VECTOR('',#105683,1.); +#105683 = DIRECTION('',(0.,0.,-1.)); +#105684 = ORIENTED_EDGE('',*,*,#105685,.T.); +#105685 = EDGE_CURVE('',#105678,#105686,#105688,.T.); +#105686 = VERTEX_POINT('',#105687); +#105687 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#105688 = LINE('',#105689,#105690); +#105689 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#105690 = VECTOR('',#105691,1.); +#105691 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105692 = ORIENTED_EDGE('',*,*,#105693,.F.); +#105693 = EDGE_CURVE('',#105694,#105686,#105696,.T.); +#105694 = VERTEX_POINT('',#105695); +#105695 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#105696 = LINE('',#105697,#105698); +#105697 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#105698 = VECTOR('',#105699,1.); +#105699 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105700 = ORIENTED_EDGE('',*,*,#105701,.T.); +#105701 = EDGE_CURVE('',#105694,#105669,#105702,.T.); +#105702 = LINE('',#105703,#105704); +#105703 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#105704 = VECTOR('',#105705,1.); +#105705 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105706 = PLANE('',#105707); +#105707 = AXIS2_PLACEMENT_3D('',#105708,#105709,#105710); +#105708 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#105709 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105710 = DIRECTION('',(0.,0.,1.)); +#105711 = ADVANCED_FACE('',(#105712),#105723,.T.); +#105712 = FACE_BOUND('',#105713,.T.); +#105713 = EDGE_LOOP('',(#105714,#105715,#105716,#105722)); +#105714 = ORIENTED_EDGE('',*,*,#104203,.F.); +#105715 = ORIENTED_EDGE('',*,*,#104213,.T.); +#105716 = ORIENTED_EDGE('',*,*,#105717,.T.); +#105717 = EDGE_CURVE('',#104214,#104254,#105718,.T.); +#105718 = LINE('',#105719,#105720); +#105719 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#105720 = VECTOR('',#105721,1.); +#105721 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105722 = ORIENTED_EDGE('',*,*,#104261,.T.); +#105723 = PLANE('',#105724); +#105724 = AXIS2_PLACEMENT_3D('',#105725,#105726,#105727); +#105725 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#105726 = DIRECTION('',(0.,-0.,-1.)); +#105727 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105728 = ADVANCED_FACE('',(#105729),#105770,.F.); +#105729 = FACE_BOUND('',#105730,.F.); +#105730 = EDGE_LOOP('',(#105731,#105739,#105740,#105748,#105756,#105764) + ); +#105731 = ORIENTED_EDGE('',*,*,#105732,.T.); +#105732 = EDGE_CURVE('',#105733,#104254,#105735,.T.); +#105733 = VERTEX_POINT('',#105734); +#105734 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#105735 = LINE('',#105736,#105737); +#105736 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#105737 = VECTOR('',#105738,1.); +#105738 = DIRECTION('',(0.,0.,1.)); +#105739 = ORIENTED_EDGE('',*,*,#104253,.F.); +#105740 = ORIENTED_EDGE('',*,*,#105741,.T.); +#105741 = EDGE_CURVE('',#104246,#105742,#105744,.T.); +#105742 = VERTEX_POINT('',#105743); +#105743 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#105744 = LINE('',#105745,#105746); +#105745 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#105746 = VECTOR('',#105747,1.); +#105747 = DIRECTION('',(0.,0.,-1.)); +#105748 = ORIENTED_EDGE('',*,*,#105749,.T.); +#105749 = EDGE_CURVE('',#105742,#105750,#105752,.T.); +#105750 = VERTEX_POINT('',#105751); +#105751 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#105752 = LINE('',#105753,#105754); +#105753 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#105754 = VECTOR('',#105755,1.); +#105755 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105756 = ORIENTED_EDGE('',*,*,#105757,.T.); +#105757 = EDGE_CURVE('',#105750,#105758,#105760,.T.); +#105758 = VERTEX_POINT('',#105759); +#105759 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#105760 = LINE('',#105761,#105762); +#105761 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#105762 = VECTOR('',#105763,1.); +#105763 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105764 = ORIENTED_EDGE('',*,*,#105765,.T.); +#105765 = EDGE_CURVE('',#105758,#105733,#105766,.T.); +#105766 = LINE('',#105767,#105768); +#105767 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#105768 = VECTOR('',#105769,1.); +#105769 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105770 = PLANE('',#105771); +#105771 = AXIS2_PLACEMENT_3D('',#105772,#105773,#105774); +#105772 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#105773 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105774 = DIRECTION('',(0.,0.,1.)); +#105775 = ADVANCED_FACE('',(#105776),#105787,.T.); +#105776 = FACE_BOUND('',#105777,.T.); +#105777 = EDGE_LOOP('',(#105778,#105784,#105785,#105786)); +#105778 = ORIENTED_EDGE('',*,*,#105779,.F.); +#105779 = EDGE_CURVE('',#104222,#104246,#105780,.T.); +#105780 = LINE('',#105781,#105782); +#105781 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#105782 = VECTOR('',#105783,1.); +#105783 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105784 = ORIENTED_EDGE('',*,*,#104229,.T.); +#105785 = ORIENTED_EDGE('',*,*,#104237,.T.); +#105786 = ORIENTED_EDGE('',*,*,#104245,.T.); +#105787 = PLANE('',#105788); +#105788 = AXIS2_PLACEMENT_3D('',#105789,#105790,#105791); +#105789 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#105790 = DIRECTION('',(0.,-0.,-1.)); +#105791 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105792 = ADVANCED_FACE('',(#105793),#105834,.T.); +#105793 = FACE_BOUND('',#105794,.T.); +#105794 = EDGE_LOOP('',(#105795,#105803,#105804,#105812,#105820,#105828) + ); +#105795 = ORIENTED_EDGE('',*,*,#105796,.T.); +#105796 = EDGE_CURVE('',#105797,#104214,#105799,.T.); +#105797 = VERTEX_POINT('',#105798); +#105798 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#105799 = LINE('',#105800,#105801); +#105800 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#105801 = VECTOR('',#105802,1.); +#105802 = DIRECTION('',(0.,0.,1.)); +#105803 = ORIENTED_EDGE('',*,*,#104221,.F.); +#105804 = ORIENTED_EDGE('',*,*,#105805,.T.); +#105805 = EDGE_CURVE('',#104222,#105806,#105808,.T.); +#105806 = VERTEX_POINT('',#105807); +#105807 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#105808 = LINE('',#105809,#105810); +#105809 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#105810 = VECTOR('',#105811,1.); +#105811 = DIRECTION('',(0.,0.,-1.)); +#105812 = ORIENTED_EDGE('',*,*,#105813,.T.); +#105813 = EDGE_CURVE('',#105806,#105814,#105816,.T.); +#105814 = VERTEX_POINT('',#105815); +#105815 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#105816 = LINE('',#105817,#105818); +#105817 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#105818 = VECTOR('',#105819,1.); +#105819 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105820 = ORIENTED_EDGE('',*,*,#105821,.F.); +#105821 = EDGE_CURVE('',#105822,#105814,#105824,.T.); +#105822 = VERTEX_POINT('',#105823); +#105823 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#105824 = LINE('',#105825,#105826); +#105825 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#105826 = VECTOR('',#105827,1.); +#105827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105828 = ORIENTED_EDGE('',*,*,#105829,.T.); +#105829 = EDGE_CURVE('',#105822,#105797,#105830,.T.); +#105830 = LINE('',#105831,#105832); +#105831 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#105832 = VECTOR('',#105833,1.); +#105833 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105834 = PLANE('',#105835); +#105835 = AXIS2_PLACEMENT_3D('',#105836,#105837,#105838); +#105836 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#105837 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105838 = DIRECTION('',(0.,0.,1.)); +#105839 = ADVANCED_FACE('',(#105840),#105851,.T.); +#105840 = FACE_BOUND('',#105841,.T.); +#105841 = EDGE_LOOP('',(#105842,#105843,#105844,#105850)); +#105842 = ORIENTED_EDGE('',*,*,#104269,.F.); +#105843 = ORIENTED_EDGE('',*,*,#104279,.T.); +#105844 = ORIENTED_EDGE('',*,*,#105845,.T.); +#105845 = EDGE_CURVE('',#104280,#104320,#105846,.T.); +#105846 = LINE('',#105847,#105848); +#105847 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#105848 = VECTOR('',#105849,1.); +#105849 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105850 = ORIENTED_EDGE('',*,*,#104327,.T.); +#105851 = PLANE('',#105852); +#105852 = AXIS2_PLACEMENT_3D('',#105853,#105854,#105855); +#105853 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#105854 = DIRECTION('',(0.,-0.,-1.)); +#105855 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105856 = ADVANCED_FACE('',(#105857),#105898,.F.); +#105857 = FACE_BOUND('',#105858,.F.); +#105858 = EDGE_LOOP('',(#105859,#105867,#105868,#105876,#105884,#105892) + ); +#105859 = ORIENTED_EDGE('',*,*,#105860,.T.); +#105860 = EDGE_CURVE('',#105861,#104320,#105863,.T.); +#105861 = VERTEX_POINT('',#105862); +#105862 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#105863 = LINE('',#105864,#105865); +#105864 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#105865 = VECTOR('',#105866,1.); +#105866 = DIRECTION('',(0.,0.,1.)); +#105867 = ORIENTED_EDGE('',*,*,#104319,.F.); +#105868 = ORIENTED_EDGE('',*,*,#105869,.T.); +#105869 = EDGE_CURVE('',#104312,#105870,#105872,.T.); +#105870 = VERTEX_POINT('',#105871); +#105871 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#105872 = LINE('',#105873,#105874); +#105873 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#105874 = VECTOR('',#105875,1.); +#105875 = DIRECTION('',(0.,0.,-1.)); +#105876 = ORIENTED_EDGE('',*,*,#105877,.T.); +#105877 = EDGE_CURVE('',#105870,#105878,#105880,.T.); +#105878 = VERTEX_POINT('',#105879); +#105879 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#105880 = LINE('',#105881,#105882); +#105881 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#105882 = VECTOR('',#105883,1.); +#105883 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105884 = ORIENTED_EDGE('',*,*,#105885,.T.); +#105885 = EDGE_CURVE('',#105878,#105886,#105888,.T.); +#105886 = VERTEX_POINT('',#105887); +#105887 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#105888 = LINE('',#105889,#105890); +#105889 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#105890 = VECTOR('',#105891,1.); +#105891 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105892 = ORIENTED_EDGE('',*,*,#105893,.T.); +#105893 = EDGE_CURVE('',#105886,#105861,#105894,.T.); +#105894 = LINE('',#105895,#105896); +#105895 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#105896 = VECTOR('',#105897,1.); +#105897 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105898 = PLANE('',#105899); +#105899 = AXIS2_PLACEMENT_3D('',#105900,#105901,#105902); +#105900 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#105901 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105902 = DIRECTION('',(0.,0.,1.)); +#105903 = ADVANCED_FACE('',(#105904),#105915,.T.); +#105904 = FACE_BOUND('',#105905,.T.); +#105905 = EDGE_LOOP('',(#105906,#105912,#105913,#105914)); +#105906 = ORIENTED_EDGE('',*,*,#105907,.F.); +#105907 = EDGE_CURVE('',#104288,#104312,#105908,.T.); +#105908 = LINE('',#105909,#105910); +#105909 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#105910 = VECTOR('',#105911,1.); +#105911 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105912 = ORIENTED_EDGE('',*,*,#104295,.T.); +#105913 = ORIENTED_EDGE('',*,*,#104303,.T.); +#105914 = ORIENTED_EDGE('',*,*,#104311,.T.); +#105915 = PLANE('',#105916); +#105916 = AXIS2_PLACEMENT_3D('',#105917,#105918,#105919); +#105917 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#105918 = DIRECTION('',(0.,-0.,-1.)); +#105919 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105920 = ADVANCED_FACE('',(#105921),#105962,.T.); +#105921 = FACE_BOUND('',#105922,.T.); +#105922 = EDGE_LOOP('',(#105923,#105931,#105932,#105940,#105948,#105956) + ); +#105923 = ORIENTED_EDGE('',*,*,#105924,.T.); +#105924 = EDGE_CURVE('',#105925,#104280,#105927,.T.); +#105925 = VERTEX_POINT('',#105926); +#105926 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#105927 = LINE('',#105928,#105929); +#105928 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#105929 = VECTOR('',#105930,1.); +#105930 = DIRECTION('',(0.,0.,1.)); +#105931 = ORIENTED_EDGE('',*,*,#104287,.F.); +#105932 = ORIENTED_EDGE('',*,*,#105933,.T.); +#105933 = EDGE_CURVE('',#104288,#105934,#105936,.T.); +#105934 = VERTEX_POINT('',#105935); +#105935 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#105936 = LINE('',#105937,#105938); +#105937 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#105938 = VECTOR('',#105939,1.); +#105939 = DIRECTION('',(0.,0.,-1.)); +#105940 = ORIENTED_EDGE('',*,*,#105941,.T.); +#105941 = EDGE_CURVE('',#105934,#105942,#105944,.T.); +#105942 = VERTEX_POINT('',#105943); +#105943 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#105944 = LINE('',#105945,#105946); +#105945 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#105946 = VECTOR('',#105947,1.); +#105947 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105948 = ORIENTED_EDGE('',*,*,#105949,.F.); +#105949 = EDGE_CURVE('',#105950,#105942,#105952,.T.); +#105950 = VERTEX_POINT('',#105951); +#105951 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#105952 = LINE('',#105953,#105954); +#105953 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#105954 = VECTOR('',#105955,1.); +#105955 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105956 = ORIENTED_EDGE('',*,*,#105957,.T.); +#105957 = EDGE_CURVE('',#105950,#105925,#105958,.T.); +#105958 = LINE('',#105959,#105960); +#105959 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#105960 = VECTOR('',#105961,1.); +#105961 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105962 = PLANE('',#105963); +#105963 = AXIS2_PLACEMENT_3D('',#105964,#105965,#105966); +#105964 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#105965 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105966 = DIRECTION('',(0.,0.,1.)); +#105967 = ADVANCED_FACE('',(#105968),#105979,.T.); +#105968 = FACE_BOUND('',#105969,.T.); +#105969 = EDGE_LOOP('',(#105970,#105971,#105972,#105978)); +#105970 = ORIENTED_EDGE('',*,*,#104335,.F.); +#105971 = ORIENTED_EDGE('',*,*,#104345,.T.); +#105972 = ORIENTED_EDGE('',*,*,#105973,.T.); +#105973 = EDGE_CURVE('',#104346,#104386,#105974,.T.); +#105974 = LINE('',#105975,#105976); +#105975 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#105976 = VECTOR('',#105977,1.); +#105977 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105978 = ORIENTED_EDGE('',*,*,#104393,.T.); +#105979 = PLANE('',#105980); +#105980 = AXIS2_PLACEMENT_3D('',#105981,#105982,#105983); +#105981 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#105982 = DIRECTION('',(0.,-0.,-1.)); +#105983 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105984 = ADVANCED_FACE('',(#105985),#106026,.F.); +#105985 = FACE_BOUND('',#105986,.F.); +#105986 = EDGE_LOOP('',(#105987,#105995,#105996,#106004,#106012,#106020) + ); +#105987 = ORIENTED_EDGE('',*,*,#105988,.T.); +#105988 = EDGE_CURVE('',#105989,#104386,#105991,.T.); +#105989 = VERTEX_POINT('',#105990); +#105990 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#105991 = LINE('',#105992,#105993); +#105992 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#105993 = VECTOR('',#105994,1.); +#105994 = DIRECTION('',(0.,0.,1.)); +#105995 = ORIENTED_EDGE('',*,*,#104385,.F.); +#105996 = ORIENTED_EDGE('',*,*,#105997,.T.); +#105997 = EDGE_CURVE('',#104378,#105998,#106000,.T.); +#105998 = VERTEX_POINT('',#105999); +#105999 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#106000 = LINE('',#106001,#106002); +#106001 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#106002 = VECTOR('',#106003,1.); +#106003 = DIRECTION('',(0.,0.,-1.)); +#106004 = ORIENTED_EDGE('',*,*,#106005,.T.); +#106005 = EDGE_CURVE('',#105998,#106006,#106008,.T.); +#106006 = VERTEX_POINT('',#106007); +#106007 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#106008 = LINE('',#106009,#106010); +#106009 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#106010 = VECTOR('',#106011,1.); +#106011 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106012 = ORIENTED_EDGE('',*,*,#106013,.T.); +#106013 = EDGE_CURVE('',#106006,#106014,#106016,.T.); +#106014 = VERTEX_POINT('',#106015); +#106015 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#106016 = LINE('',#106017,#106018); +#106017 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#106018 = VECTOR('',#106019,1.); +#106019 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106020 = ORIENTED_EDGE('',*,*,#106021,.T.); +#106021 = EDGE_CURVE('',#106014,#105989,#106022,.T.); +#106022 = LINE('',#106023,#106024); +#106023 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#106024 = VECTOR('',#106025,1.); +#106025 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106026 = PLANE('',#106027); +#106027 = AXIS2_PLACEMENT_3D('',#106028,#106029,#106030); +#106028 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#106029 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106030 = DIRECTION('',(0.,0.,1.)); +#106031 = ADVANCED_FACE('',(#106032),#106043,.T.); +#106032 = FACE_BOUND('',#106033,.T.); +#106033 = EDGE_LOOP('',(#106034,#106040,#106041,#106042)); +#106034 = ORIENTED_EDGE('',*,*,#106035,.F.); +#106035 = EDGE_CURVE('',#104354,#104378,#106036,.T.); +#106036 = LINE('',#106037,#106038); +#106037 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#106038 = VECTOR('',#106039,1.); +#106039 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106040 = ORIENTED_EDGE('',*,*,#104361,.T.); +#106041 = ORIENTED_EDGE('',*,*,#104369,.T.); +#106042 = ORIENTED_EDGE('',*,*,#104377,.T.); +#106043 = PLANE('',#106044); +#106044 = AXIS2_PLACEMENT_3D('',#106045,#106046,#106047); +#106045 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#106046 = DIRECTION('',(0.,-0.,-1.)); +#106047 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106048 = ADVANCED_FACE('',(#106049),#106090,.T.); +#106049 = FACE_BOUND('',#106050,.T.); +#106050 = EDGE_LOOP('',(#106051,#106059,#106060,#106068,#106076,#106084) + ); +#106051 = ORIENTED_EDGE('',*,*,#106052,.T.); +#106052 = EDGE_CURVE('',#106053,#104346,#106055,.T.); +#106053 = VERTEX_POINT('',#106054); +#106054 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#106055 = LINE('',#106056,#106057); +#106056 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#106057 = VECTOR('',#106058,1.); +#106058 = DIRECTION('',(0.,0.,1.)); +#106059 = ORIENTED_EDGE('',*,*,#104353,.F.); +#106060 = ORIENTED_EDGE('',*,*,#106061,.T.); +#106061 = EDGE_CURVE('',#104354,#106062,#106064,.T.); +#106062 = VERTEX_POINT('',#106063); +#106063 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#106064 = LINE('',#106065,#106066); +#106065 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#106066 = VECTOR('',#106067,1.); +#106067 = DIRECTION('',(0.,0.,-1.)); +#106068 = ORIENTED_EDGE('',*,*,#106069,.T.); +#106069 = EDGE_CURVE('',#106062,#106070,#106072,.T.); +#106070 = VERTEX_POINT('',#106071); +#106071 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#106072 = LINE('',#106073,#106074); +#106073 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#106074 = VECTOR('',#106075,1.); +#106075 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106076 = ORIENTED_EDGE('',*,*,#106077,.F.); +#106077 = EDGE_CURVE('',#106078,#106070,#106080,.T.); +#106078 = VERTEX_POINT('',#106079); +#106079 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#106080 = LINE('',#106081,#106082); +#106081 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#106082 = VECTOR('',#106083,1.); +#106083 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106084 = ORIENTED_EDGE('',*,*,#106085,.T.); +#106085 = EDGE_CURVE('',#106078,#106053,#106086,.T.); +#106086 = LINE('',#106087,#106088); +#106087 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#106088 = VECTOR('',#106089,1.); +#106089 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106090 = PLANE('',#106091); +#106091 = AXIS2_PLACEMENT_3D('',#106092,#106093,#106094); +#106092 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#106093 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106094 = DIRECTION('',(0.,0.,1.)); +#106095 = ADVANCED_FACE('',(#106096),#106107,.T.); +#106096 = FACE_BOUND('',#106097,.T.); +#106097 = EDGE_LOOP('',(#106098,#106099,#106100,#106106)); +#106098 = ORIENTED_EDGE('',*,*,#104401,.F.); +#106099 = ORIENTED_EDGE('',*,*,#104411,.T.); +#106100 = ORIENTED_EDGE('',*,*,#106101,.T.); +#106101 = EDGE_CURVE('',#104412,#104452,#106102,.T.); +#106102 = LINE('',#106103,#106104); +#106103 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#106104 = VECTOR('',#106105,1.); +#106105 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106106 = ORIENTED_EDGE('',*,*,#104459,.T.); +#106107 = PLANE('',#106108); +#106108 = AXIS2_PLACEMENT_3D('',#106109,#106110,#106111); +#106109 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#106110 = DIRECTION('',(0.,-0.,-1.)); +#106111 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106112 = ADVANCED_FACE('',(#106113),#106154,.F.); +#106113 = FACE_BOUND('',#106114,.F.); +#106114 = EDGE_LOOP('',(#106115,#106123,#106124,#106132,#106140,#106148) + ); +#106115 = ORIENTED_EDGE('',*,*,#106116,.T.); +#106116 = EDGE_CURVE('',#106117,#104452,#106119,.T.); +#106117 = VERTEX_POINT('',#106118); +#106118 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#106119 = LINE('',#106120,#106121); +#106120 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#106121 = VECTOR('',#106122,1.); +#106122 = DIRECTION('',(0.,0.,1.)); +#106123 = ORIENTED_EDGE('',*,*,#104451,.F.); +#106124 = ORIENTED_EDGE('',*,*,#106125,.T.); +#106125 = EDGE_CURVE('',#104444,#106126,#106128,.T.); +#106126 = VERTEX_POINT('',#106127); +#106127 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#106128 = LINE('',#106129,#106130); +#106129 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#106130 = VECTOR('',#106131,1.); +#106131 = DIRECTION('',(0.,0.,-1.)); +#106132 = ORIENTED_EDGE('',*,*,#106133,.T.); +#106133 = EDGE_CURVE('',#106126,#106134,#106136,.T.); +#106134 = VERTEX_POINT('',#106135); +#106135 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#106136 = LINE('',#106137,#106138); +#106137 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#106138 = VECTOR('',#106139,1.); +#106139 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106140 = ORIENTED_EDGE('',*,*,#106141,.T.); +#106141 = EDGE_CURVE('',#106134,#106142,#106144,.T.); +#106142 = VERTEX_POINT('',#106143); +#106143 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#106144 = LINE('',#106145,#106146); +#106145 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#106146 = VECTOR('',#106147,1.); +#106147 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106148 = ORIENTED_EDGE('',*,*,#106149,.T.); +#106149 = EDGE_CURVE('',#106142,#106117,#106150,.T.); +#106150 = LINE('',#106151,#106152); +#106151 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#106152 = VECTOR('',#106153,1.); +#106153 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106154 = PLANE('',#106155); +#106155 = AXIS2_PLACEMENT_3D('',#106156,#106157,#106158); +#106156 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#106157 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106158 = DIRECTION('',(0.,0.,1.)); +#106159 = ADVANCED_FACE('',(#106160),#106171,.T.); +#106160 = FACE_BOUND('',#106161,.T.); +#106161 = EDGE_LOOP('',(#106162,#106168,#106169,#106170)); +#106162 = ORIENTED_EDGE('',*,*,#106163,.F.); +#106163 = EDGE_CURVE('',#104420,#104444,#106164,.T.); +#106164 = LINE('',#106165,#106166); +#106165 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#106166 = VECTOR('',#106167,1.); +#106167 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106168 = ORIENTED_EDGE('',*,*,#104427,.T.); +#106169 = ORIENTED_EDGE('',*,*,#104435,.T.); +#106170 = ORIENTED_EDGE('',*,*,#104443,.T.); +#106171 = PLANE('',#106172); +#106172 = AXIS2_PLACEMENT_3D('',#106173,#106174,#106175); +#106173 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#106174 = DIRECTION('',(0.,-0.,-1.)); +#106175 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106176 = ADVANCED_FACE('',(#106177),#106218,.T.); +#106177 = FACE_BOUND('',#106178,.T.); +#106178 = EDGE_LOOP('',(#106179,#106187,#106188,#106196,#106204,#106212) + ); +#106179 = ORIENTED_EDGE('',*,*,#106180,.T.); +#106180 = EDGE_CURVE('',#106181,#104412,#106183,.T.); +#106181 = VERTEX_POINT('',#106182); +#106182 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#106183 = LINE('',#106184,#106185); +#106184 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#106185 = VECTOR('',#106186,1.); +#106186 = DIRECTION('',(0.,0.,1.)); +#106187 = ORIENTED_EDGE('',*,*,#104419,.F.); +#106188 = ORIENTED_EDGE('',*,*,#106189,.T.); +#106189 = EDGE_CURVE('',#104420,#106190,#106192,.T.); +#106190 = VERTEX_POINT('',#106191); +#106191 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#106192 = LINE('',#106193,#106194); +#106193 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#106194 = VECTOR('',#106195,1.); +#106195 = DIRECTION('',(0.,0.,-1.)); +#106196 = ORIENTED_EDGE('',*,*,#106197,.T.); +#106197 = EDGE_CURVE('',#106190,#106198,#106200,.T.); +#106198 = VERTEX_POINT('',#106199); +#106199 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#106200 = LINE('',#106201,#106202); +#106201 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#106202 = VECTOR('',#106203,1.); +#106203 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106204 = ORIENTED_EDGE('',*,*,#106205,.F.); +#106205 = EDGE_CURVE('',#106206,#106198,#106208,.T.); +#106206 = VERTEX_POINT('',#106207); +#106207 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#106208 = LINE('',#106209,#106210); +#106209 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#106210 = VECTOR('',#106211,1.); +#106211 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106212 = ORIENTED_EDGE('',*,*,#106213,.T.); +#106213 = EDGE_CURVE('',#106206,#106181,#106214,.T.); +#106214 = LINE('',#106215,#106216); +#106215 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#106216 = VECTOR('',#106217,1.); +#106217 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106218 = PLANE('',#106219); +#106219 = AXIS2_PLACEMENT_3D('',#106220,#106221,#106222); +#106220 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#106221 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106222 = DIRECTION('',(0.,0.,1.)); +#106223 = ADVANCED_FACE('',(#106224),#106235,.T.); +#106224 = FACE_BOUND('',#106225,.T.); +#106225 = EDGE_LOOP('',(#106226,#106227,#106228,#106234)); +#106226 = ORIENTED_EDGE('',*,*,#104467,.F.); +#106227 = ORIENTED_EDGE('',*,*,#104477,.T.); +#106228 = ORIENTED_EDGE('',*,*,#106229,.T.); +#106229 = EDGE_CURVE('',#104478,#104518,#106230,.T.); +#106230 = LINE('',#106231,#106232); +#106231 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#106232 = VECTOR('',#106233,1.); +#106233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106234 = ORIENTED_EDGE('',*,*,#104525,.T.); +#106235 = PLANE('',#106236); +#106236 = AXIS2_PLACEMENT_3D('',#106237,#106238,#106239); +#106237 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#106238 = DIRECTION('',(0.,-0.,-1.)); +#106239 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106240 = ADVANCED_FACE('',(#106241),#106282,.F.); +#106241 = FACE_BOUND('',#106242,.F.); +#106242 = EDGE_LOOP('',(#106243,#106251,#106252,#106260,#106268,#106276) + ); +#106243 = ORIENTED_EDGE('',*,*,#106244,.T.); +#106244 = EDGE_CURVE('',#106245,#104518,#106247,.T.); +#106245 = VERTEX_POINT('',#106246); +#106246 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#106247 = LINE('',#106248,#106249); +#106248 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#106249 = VECTOR('',#106250,1.); +#106250 = DIRECTION('',(0.,0.,1.)); +#106251 = ORIENTED_EDGE('',*,*,#104517,.F.); +#106252 = ORIENTED_EDGE('',*,*,#106253,.T.); +#106253 = EDGE_CURVE('',#104510,#106254,#106256,.T.); +#106254 = VERTEX_POINT('',#106255); +#106255 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#106256 = LINE('',#106257,#106258); +#106257 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#106258 = VECTOR('',#106259,1.); +#106259 = DIRECTION('',(0.,0.,-1.)); +#106260 = ORIENTED_EDGE('',*,*,#106261,.T.); +#106261 = EDGE_CURVE('',#106254,#106262,#106264,.T.); +#106262 = VERTEX_POINT('',#106263); +#106263 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#106264 = LINE('',#106265,#106266); +#106265 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#106266 = VECTOR('',#106267,1.); +#106267 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106268 = ORIENTED_EDGE('',*,*,#106269,.T.); +#106269 = EDGE_CURVE('',#106262,#106270,#106272,.T.); +#106270 = VERTEX_POINT('',#106271); +#106271 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#106272 = LINE('',#106273,#106274); +#106273 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#106274 = VECTOR('',#106275,1.); +#106275 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106276 = ORIENTED_EDGE('',*,*,#106277,.T.); +#106277 = EDGE_CURVE('',#106270,#106245,#106278,.T.); +#106278 = LINE('',#106279,#106280); +#106279 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#106280 = VECTOR('',#106281,1.); +#106281 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106282 = PLANE('',#106283); +#106283 = AXIS2_PLACEMENT_3D('',#106284,#106285,#106286); +#106284 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#106285 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106286 = DIRECTION('',(0.,0.,1.)); +#106287 = ADVANCED_FACE('',(#106288),#106299,.T.); +#106288 = FACE_BOUND('',#106289,.T.); +#106289 = EDGE_LOOP('',(#106290,#106296,#106297,#106298)); +#106290 = ORIENTED_EDGE('',*,*,#106291,.F.); +#106291 = EDGE_CURVE('',#104486,#104510,#106292,.T.); +#106292 = LINE('',#106293,#106294); +#106293 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#106294 = VECTOR('',#106295,1.); +#106295 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106296 = ORIENTED_EDGE('',*,*,#104493,.T.); +#106297 = ORIENTED_EDGE('',*,*,#104501,.T.); +#106298 = ORIENTED_EDGE('',*,*,#104509,.T.); +#106299 = PLANE('',#106300); +#106300 = AXIS2_PLACEMENT_3D('',#106301,#106302,#106303); +#106301 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#106302 = DIRECTION('',(0.,-0.,-1.)); +#106303 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106304 = ADVANCED_FACE('',(#106305),#106346,.T.); +#106305 = FACE_BOUND('',#106306,.T.); +#106306 = EDGE_LOOP('',(#106307,#106315,#106316,#106324,#106332,#106340) + ); +#106307 = ORIENTED_EDGE('',*,*,#106308,.T.); +#106308 = EDGE_CURVE('',#106309,#104478,#106311,.T.); +#106309 = VERTEX_POINT('',#106310); +#106310 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#106311 = LINE('',#106312,#106313); +#106312 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#106313 = VECTOR('',#106314,1.); +#106314 = DIRECTION('',(0.,0.,1.)); +#106315 = ORIENTED_EDGE('',*,*,#104485,.F.); +#106316 = ORIENTED_EDGE('',*,*,#106317,.T.); +#106317 = EDGE_CURVE('',#104486,#106318,#106320,.T.); +#106318 = VERTEX_POINT('',#106319); +#106319 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#106320 = LINE('',#106321,#106322); +#106321 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#106322 = VECTOR('',#106323,1.); +#106323 = DIRECTION('',(0.,0.,-1.)); +#106324 = ORIENTED_EDGE('',*,*,#106325,.T.); +#106325 = EDGE_CURVE('',#106318,#106326,#106328,.T.); +#106326 = VERTEX_POINT('',#106327); +#106327 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#106328 = LINE('',#106329,#106330); +#106329 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#106330 = VECTOR('',#106331,1.); +#106331 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106332 = ORIENTED_EDGE('',*,*,#106333,.F.); +#106333 = EDGE_CURVE('',#106334,#106326,#106336,.T.); +#106334 = VERTEX_POINT('',#106335); +#106335 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#106336 = LINE('',#106337,#106338); +#106337 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#106338 = VECTOR('',#106339,1.); +#106339 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106340 = ORIENTED_EDGE('',*,*,#106341,.T.); +#106341 = EDGE_CURVE('',#106334,#106309,#106342,.T.); +#106342 = LINE('',#106343,#106344); +#106343 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#106344 = VECTOR('',#106345,1.); +#106345 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106346 = PLANE('',#106347); +#106347 = AXIS2_PLACEMENT_3D('',#106348,#106349,#106350); +#106348 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#106349 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106350 = DIRECTION('',(0.,0.,1.)); +#106351 = ADVANCED_FACE('',(#106352),#106377,.F.); +#106352 = FACE_BOUND('',#106353,.F.); +#106353 = EDGE_LOOP('',(#106354,#106362,#106370,#106376)); +#106354 = ORIENTED_EDGE('',*,*,#106355,.T.); +#106355 = EDGE_CURVE('',#104564,#106356,#106358,.T.); +#106356 = VERTEX_POINT('',#106357); +#106357 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#106358 = LINE('',#106359,#106360); +#106359 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#106360 = VECTOR('',#106361,1.); +#106361 = DIRECTION('',(0.,-0.,-1.)); +#106362 = ORIENTED_EDGE('',*,*,#106363,.T.); +#106363 = EDGE_CURVE('',#106356,#106364,#106366,.T.); +#106364 = VERTEX_POINT('',#106365); +#106365 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#106366 = LINE('',#106367,#106368); +#106367 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#106368 = VECTOR('',#106369,1.); +#106369 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106370 = ORIENTED_EDGE('',*,*,#106371,.F.); +#106371 = EDGE_CURVE('',#104573,#106364,#106372,.T.); +#106372 = LINE('',#106373,#106374); +#106373 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#106374 = VECTOR('',#106375,1.); +#106375 = DIRECTION('',(0.,-0.,-1.)); +#106376 = ORIENTED_EDGE('',*,*,#104580,.F.); +#106377 = PLANE('',#106378); +#106378 = AXIS2_PLACEMENT_3D('',#106379,#106380,#106381); +#106379 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#106380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106381 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106382 = ADVANCED_FACE('',(#106383),#106433,.F.); +#106383 = FACE_BOUND('',#106384,.F.); +#106384 = EDGE_LOOP('',(#106385,#106386,#106387,#106395,#106403,#106411, + #106419,#106427)); +#106385 = ORIENTED_EDGE('',*,*,#104604,.F.); +#106386 = ORIENTED_EDGE('',*,*,#106371,.T.); +#106387 = ORIENTED_EDGE('',*,*,#106388,.T.); +#106388 = EDGE_CURVE('',#106364,#106389,#106391,.T.); +#106389 = VERTEX_POINT('',#106390); +#106390 = CARTESIAN_POINT('',(0.1,-17.48,0.9)); +#106391 = LINE('',#106392,#106393); +#106392 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#106393 = VECTOR('',#106394,1.); +#106394 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106395 = ORIENTED_EDGE('',*,*,#106396,.T.); +#106396 = EDGE_CURVE('',#106389,#106397,#106399,.T.); +#106397 = VERTEX_POINT('',#106398); +#106398 = CARTESIAN_POINT('',(0.1,-17.48,7.4)); +#106399 = LINE('',#106400,#106401); +#106400 = CARTESIAN_POINT('',(0.1,-17.48,6.055738799212)); +#106401 = VECTOR('',#106402,1.); +#106402 = DIRECTION('',(0.,-0.,1.)); +#106403 = ORIENTED_EDGE('',*,*,#106404,.F.); +#106404 = EDGE_CURVE('',#106405,#106397,#106407,.T.); +#106405 = VERTEX_POINT('',#106406); +#106406 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#106407 = LINE('',#106408,#106409); +#106408 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#106409 = VECTOR('',#106410,1.); +#106410 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106411 = ORIENTED_EDGE('',*,*,#106412,.F.); +#106412 = EDGE_CURVE('',#106413,#106405,#106415,.T.); +#106413 = VERTEX_POINT('',#106414); +#106414 = CARTESIAN_POINT('',(-0.1,-17.48,0.9)); +#106415 = LINE('',#106416,#106417); +#106416 = CARTESIAN_POINT('',(-0.1,-17.48,6.055738799212)); +#106417 = VECTOR('',#106418,1.); +#106418 = DIRECTION('',(0.,-0.,1.)); +#106419 = ORIENTED_EDGE('',*,*,#106420,.T.); +#106420 = EDGE_CURVE('',#106413,#106421,#106423,.T.); +#106421 = VERTEX_POINT('',#106422); +#106422 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#106423 = LINE('',#106424,#106425); +#106424 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#106425 = VECTOR('',#106426,1.); +#106426 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106427 = ORIENTED_EDGE('',*,*,#106428,.F.); +#106428 = EDGE_CURVE('',#104597,#106421,#106429,.T.); +#106429 = LINE('',#106430,#106431); +#106430 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#106431 = VECTOR('',#106432,1.); +#106432 = DIRECTION('',(0.,-0.,-1.)); +#106433 = PLANE('',#106434); +#106434 = AXIS2_PLACEMENT_3D('',#106435,#106436,#106437); +#106435 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#106436 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106437 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106438 = ADVANCED_FACE('',(#106439),#106457,.F.); +#106439 = FACE_BOUND('',#106440,.F.); +#106440 = EDGE_LOOP('',(#106441,#106442,#106450,#106456)); +#106441 = ORIENTED_EDGE('',*,*,#106428,.T.); +#106442 = ORIENTED_EDGE('',*,*,#106443,.T.); +#106443 = EDGE_CURVE('',#106421,#106444,#106446,.T.); +#106444 = VERTEX_POINT('',#106445); +#106445 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#106446 = LINE('',#106447,#106448); +#106447 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#106448 = VECTOR('',#106449,1.); +#106449 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106450 = ORIENTED_EDGE('',*,*,#106451,.F.); +#106451 = EDGE_CURVE('',#104621,#106444,#106452,.T.); +#106452 = LINE('',#106453,#106454); +#106453 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#106454 = VECTOR('',#106455,1.); +#106455 = DIRECTION('',(0.,-0.,-1.)); +#106456 = ORIENTED_EDGE('',*,*,#104628,.F.); +#106457 = PLANE('',#106458); +#106458 = AXIS2_PLACEMENT_3D('',#106459,#106460,#106461); +#106459 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#106460 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106461 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106462 = ADVANCED_FACE('',(#106463),#106506,.F.); +#106463 = FACE_BOUND('',#106464,.F.); +#106464 = EDGE_LOOP('',(#106465,#106466,#106467,#106475,#106483,#106491, + #106499,#106505)); +#106465 = ORIENTED_EDGE('',*,*,#104645,.F.); +#106466 = ORIENTED_EDGE('',*,*,#106451,.T.); +#106467 = ORIENTED_EDGE('',*,*,#106468,.T.); +#106468 = EDGE_CURVE('',#106444,#106469,#106471,.T.); +#106469 = VERTEX_POINT('',#106470); +#106470 = CARTESIAN_POINT('',(-0.1,-18.08,0.9)); +#106471 = LINE('',#106472,#106473); +#106472 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#106473 = VECTOR('',#106474,1.); +#106474 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106475 = ORIENTED_EDGE('',*,*,#106476,.F.); +#106476 = EDGE_CURVE('',#106477,#106469,#106479,.T.); +#106477 = VERTEX_POINT('',#106478); +#106478 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#106479 = LINE('',#106480,#106481); +#106480 = CARTESIAN_POINT('',(-0.1,-18.08,6.055738799212)); +#106481 = VECTOR('',#106482,1.); +#106482 = DIRECTION('',(-0.,0.,-1.)); +#106483 = ORIENTED_EDGE('',*,*,#106484,.T.); +#106484 = EDGE_CURVE('',#106477,#106485,#106487,.T.); +#106485 = VERTEX_POINT('',#106486); +#106486 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#106487 = LINE('',#106488,#106489); +#106488 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#106489 = VECTOR('',#106490,1.); +#106490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106491 = ORIENTED_EDGE('',*,*,#106492,.T.); +#106492 = EDGE_CURVE('',#106485,#106493,#106495,.T.); +#106493 = VERTEX_POINT('',#106494); +#106494 = CARTESIAN_POINT('',(0.1,-18.08,0.9)); +#106495 = LINE('',#106496,#106497); +#106496 = CARTESIAN_POINT('',(0.1,-18.08,6.055738799212)); +#106497 = VECTOR('',#106498,1.); +#106498 = DIRECTION('',(-0.,0.,-1.)); +#106499 = ORIENTED_EDGE('',*,*,#106500,.T.); +#106500 = EDGE_CURVE('',#106493,#106356,#106501,.T.); +#106501 = LINE('',#106502,#106503); +#106502 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#106503 = VECTOR('',#106504,1.); +#106504 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106505 = ORIENTED_EDGE('',*,*,#106355,.F.); +#106506 = PLANE('',#106507); +#106507 = AXIS2_PLACEMENT_3D('',#106508,#106509,#106510); +#106508 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#106509 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106510 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106511 = ADVANCED_FACE('',(#106512),#106537,.F.); +#106512 = FACE_BOUND('',#106513,.F.); +#106513 = EDGE_LOOP('',(#106514,#106522,#106530,#106536)); +#106514 = ORIENTED_EDGE('',*,*,#106515,.T.); +#106515 = EDGE_CURVE('',#104660,#106516,#106518,.T.); +#106516 = VERTEX_POINT('',#106517); +#106517 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#106518 = LINE('',#106519,#106520); +#106519 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#106520 = VECTOR('',#106521,1.); +#106521 = DIRECTION('',(0.,-0.,-1.)); +#106522 = ORIENTED_EDGE('',*,*,#106523,.T.); +#106523 = EDGE_CURVE('',#106516,#106524,#106526,.T.); +#106524 = VERTEX_POINT('',#106525); +#106525 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#106526 = LINE('',#106527,#106528); +#106527 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#106528 = VECTOR('',#106529,1.); +#106529 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106530 = ORIENTED_EDGE('',*,*,#106531,.F.); +#106531 = EDGE_CURVE('',#104669,#106524,#106532,.T.); +#106532 = LINE('',#106533,#106534); +#106533 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#106534 = VECTOR('',#106535,1.); +#106535 = DIRECTION('',(0.,-0.,-1.)); +#106536 = ORIENTED_EDGE('',*,*,#104676,.F.); +#106537 = PLANE('',#106538); +#106538 = AXIS2_PLACEMENT_3D('',#106539,#106540,#106541); +#106539 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#106540 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106541 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106542 = ADVANCED_FACE('',(#106543),#106593,.F.); +#106543 = FACE_BOUND('',#106544,.F.); +#106544 = EDGE_LOOP('',(#106545,#106546,#106547,#106555,#106563,#106571, + #106579,#106587)); +#106545 = ORIENTED_EDGE('',*,*,#104700,.F.); +#106546 = ORIENTED_EDGE('',*,*,#106531,.T.); +#106547 = ORIENTED_EDGE('',*,*,#106548,.T.); +#106548 = EDGE_CURVE('',#106524,#106549,#106551,.T.); +#106549 = VERTEX_POINT('',#106550); +#106550 = CARTESIAN_POINT('',(0.1,-14.94,0.9)); +#106551 = LINE('',#106552,#106553); +#106552 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#106553 = VECTOR('',#106554,1.); +#106554 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106555 = ORIENTED_EDGE('',*,*,#106556,.T.); +#106556 = EDGE_CURVE('',#106549,#106557,#106559,.T.); +#106557 = VERTEX_POINT('',#106558); +#106558 = CARTESIAN_POINT('',(0.1,-14.94,7.4)); +#106559 = LINE('',#106560,#106561); +#106560 = CARTESIAN_POINT('',(0.1,-14.94,6.055738799212)); +#106561 = VECTOR('',#106562,1.); +#106562 = DIRECTION('',(0.,-0.,1.)); +#106563 = ORIENTED_EDGE('',*,*,#106564,.F.); +#106564 = EDGE_CURVE('',#106565,#106557,#106567,.T.); +#106565 = VERTEX_POINT('',#106566); +#106566 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#106567 = LINE('',#106568,#106569); +#106568 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#106569 = VECTOR('',#106570,1.); +#106570 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106571 = ORIENTED_EDGE('',*,*,#106572,.F.); +#106572 = EDGE_CURVE('',#106573,#106565,#106575,.T.); +#106573 = VERTEX_POINT('',#106574); +#106574 = CARTESIAN_POINT('',(-0.1,-14.94,0.9)); +#106575 = LINE('',#106576,#106577); +#106576 = CARTESIAN_POINT('',(-0.1,-14.94,6.055738799212)); +#106577 = VECTOR('',#106578,1.); +#106578 = DIRECTION('',(0.,-0.,1.)); +#106579 = ORIENTED_EDGE('',*,*,#106580,.T.); +#106580 = EDGE_CURVE('',#106573,#106581,#106583,.T.); +#106581 = VERTEX_POINT('',#106582); +#106582 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#106583 = LINE('',#106584,#106585); +#106584 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#106585 = VECTOR('',#106586,1.); +#106586 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106587 = ORIENTED_EDGE('',*,*,#106588,.F.); +#106588 = EDGE_CURVE('',#104693,#106581,#106589,.T.); +#106589 = LINE('',#106590,#106591); +#106590 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#106591 = VECTOR('',#106592,1.); +#106592 = DIRECTION('',(0.,-0.,-1.)); +#106593 = PLANE('',#106594); +#106594 = AXIS2_PLACEMENT_3D('',#106595,#106596,#106597); +#106595 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#106596 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106597 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106598 = ADVANCED_FACE('',(#106599),#106617,.F.); +#106599 = FACE_BOUND('',#106600,.F.); +#106600 = EDGE_LOOP('',(#106601,#106602,#106610,#106616)); +#106601 = ORIENTED_EDGE('',*,*,#106588,.T.); +#106602 = ORIENTED_EDGE('',*,*,#106603,.T.); +#106603 = EDGE_CURVE('',#106581,#106604,#106606,.T.); +#106604 = VERTEX_POINT('',#106605); +#106605 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#106606 = LINE('',#106607,#106608); +#106607 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#106608 = VECTOR('',#106609,1.); +#106609 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106610 = ORIENTED_EDGE('',*,*,#106611,.F.); +#106611 = EDGE_CURVE('',#104717,#106604,#106612,.T.); +#106612 = LINE('',#106613,#106614); +#106613 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#106614 = VECTOR('',#106615,1.); +#106615 = DIRECTION('',(0.,-0.,-1.)); +#106616 = ORIENTED_EDGE('',*,*,#104724,.F.); +#106617 = PLANE('',#106618); +#106618 = AXIS2_PLACEMENT_3D('',#106619,#106620,#106621); +#106619 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#106620 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106621 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106622 = ADVANCED_FACE('',(#106623),#106666,.F.); +#106623 = FACE_BOUND('',#106624,.F.); +#106624 = EDGE_LOOP('',(#106625,#106626,#106627,#106635,#106643,#106651, + #106659,#106665)); +#106625 = ORIENTED_EDGE('',*,*,#104741,.F.); +#106626 = ORIENTED_EDGE('',*,*,#106611,.T.); +#106627 = ORIENTED_EDGE('',*,*,#106628,.T.); +#106628 = EDGE_CURVE('',#106604,#106629,#106631,.T.); +#106629 = VERTEX_POINT('',#106630); +#106630 = CARTESIAN_POINT('',(-0.1,-15.54,0.9)); +#106631 = LINE('',#106632,#106633); +#106632 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#106633 = VECTOR('',#106634,1.); +#106634 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106635 = ORIENTED_EDGE('',*,*,#106636,.F.); +#106636 = EDGE_CURVE('',#106637,#106629,#106639,.T.); +#106637 = VERTEX_POINT('',#106638); +#106638 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#106639 = LINE('',#106640,#106641); +#106640 = CARTESIAN_POINT('',(-0.1,-15.54,6.055738799212)); +#106641 = VECTOR('',#106642,1.); +#106642 = DIRECTION('',(-0.,0.,-1.)); +#106643 = ORIENTED_EDGE('',*,*,#106644,.T.); +#106644 = EDGE_CURVE('',#106637,#106645,#106647,.T.); +#106645 = VERTEX_POINT('',#106646); +#106646 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#106647 = LINE('',#106648,#106649); +#106648 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#106649 = VECTOR('',#106650,1.); +#106650 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106651 = ORIENTED_EDGE('',*,*,#106652,.T.); +#106652 = EDGE_CURVE('',#106645,#106653,#106655,.T.); +#106653 = VERTEX_POINT('',#106654); +#106654 = CARTESIAN_POINT('',(0.1,-15.54,0.9)); +#106655 = LINE('',#106656,#106657); +#106656 = CARTESIAN_POINT('',(0.1,-15.54,6.055738799212)); +#106657 = VECTOR('',#106658,1.); +#106658 = DIRECTION('',(-0.,0.,-1.)); +#106659 = ORIENTED_EDGE('',*,*,#106660,.T.); +#106660 = EDGE_CURVE('',#106653,#106516,#106661,.T.); +#106661 = LINE('',#106662,#106663); +#106662 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#106663 = VECTOR('',#106664,1.); +#106664 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106665 = ORIENTED_EDGE('',*,*,#106515,.F.); +#106666 = PLANE('',#106667); +#106667 = AXIS2_PLACEMENT_3D('',#106668,#106669,#106670); +#106668 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#106669 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106670 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106671 = ADVANCED_FACE('',(#106672),#106697,.F.); +#106672 = FACE_BOUND('',#106673,.F.); +#106673 = EDGE_LOOP('',(#106674,#106682,#106690,#106696)); +#106674 = ORIENTED_EDGE('',*,*,#106675,.T.); +#106675 = EDGE_CURVE('',#104756,#106676,#106678,.T.); +#106676 = VERTEX_POINT('',#106677); +#106677 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#106678 = LINE('',#106679,#106680); +#106679 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#106680 = VECTOR('',#106681,1.); +#106681 = DIRECTION('',(0.,-0.,-1.)); +#106682 = ORIENTED_EDGE('',*,*,#106683,.T.); +#106683 = EDGE_CURVE('',#106676,#106684,#106686,.T.); +#106684 = VERTEX_POINT('',#106685); +#106685 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#106686 = LINE('',#106687,#106688); +#106687 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#106688 = VECTOR('',#106689,1.); +#106689 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106690 = ORIENTED_EDGE('',*,*,#106691,.F.); +#106691 = EDGE_CURVE('',#104765,#106684,#106692,.T.); +#106692 = LINE('',#106693,#106694); +#106693 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#106694 = VECTOR('',#106695,1.); +#106695 = DIRECTION('',(0.,-0.,-1.)); +#106696 = ORIENTED_EDGE('',*,*,#104772,.F.); +#106697 = PLANE('',#106698); +#106698 = AXIS2_PLACEMENT_3D('',#106699,#106700,#106701); +#106699 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#106700 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106701 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106702 = ADVANCED_FACE('',(#106703),#106753,.F.); +#106703 = FACE_BOUND('',#106704,.F.); +#106704 = EDGE_LOOP('',(#106705,#106706,#106707,#106715,#106723,#106731, + #106739,#106747)); +#106705 = ORIENTED_EDGE('',*,*,#104796,.F.); +#106706 = ORIENTED_EDGE('',*,*,#106691,.T.); +#106707 = ORIENTED_EDGE('',*,*,#106708,.T.); +#106708 = EDGE_CURVE('',#106684,#106709,#106711,.T.); +#106709 = VERTEX_POINT('',#106710); +#106710 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#106711 = LINE('',#106712,#106713); +#106712 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#106713 = VECTOR('',#106714,1.); +#106714 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106715 = ORIENTED_EDGE('',*,*,#106716,.T.); +#106716 = EDGE_CURVE('',#106709,#106717,#106719,.T.); +#106717 = VERTEX_POINT('',#106718); +#106718 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#106719 = LINE('',#106720,#106721); +#106720 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#106721 = VECTOR('',#106722,1.); +#106722 = DIRECTION('',(0.,-0.,1.)); +#106723 = ORIENTED_EDGE('',*,*,#106724,.F.); +#106724 = EDGE_CURVE('',#106725,#106717,#106727,.T.); +#106725 = VERTEX_POINT('',#106726); +#106726 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#106727 = LINE('',#106728,#106729); +#106728 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#106729 = VECTOR('',#106730,1.); +#106730 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106731 = ORIENTED_EDGE('',*,*,#106732,.F.); +#106732 = EDGE_CURVE('',#106733,#106725,#106735,.T.); +#106733 = VERTEX_POINT('',#106734); +#106734 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#106735 = LINE('',#106736,#106737); +#106736 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#106737 = VECTOR('',#106738,1.); +#106738 = DIRECTION('',(0.,-0.,1.)); +#106739 = ORIENTED_EDGE('',*,*,#106740,.T.); +#106740 = EDGE_CURVE('',#106733,#106741,#106743,.T.); +#106741 = VERTEX_POINT('',#106742); +#106742 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#106743 = LINE('',#106744,#106745); +#106744 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#106745 = VECTOR('',#106746,1.); +#106746 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106747 = ORIENTED_EDGE('',*,*,#106748,.F.); +#106748 = EDGE_CURVE('',#104789,#106741,#106749,.T.); +#106749 = LINE('',#106750,#106751); +#106750 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#106751 = VECTOR('',#106752,1.); +#106752 = DIRECTION('',(0.,-0.,-1.)); +#106753 = PLANE('',#106754); +#106754 = AXIS2_PLACEMENT_3D('',#106755,#106756,#106757); +#106755 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#106756 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106757 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106758 = ADVANCED_FACE('',(#106759),#106777,.F.); +#106759 = FACE_BOUND('',#106760,.F.); +#106760 = EDGE_LOOP('',(#106761,#106762,#106770,#106776)); +#106761 = ORIENTED_EDGE('',*,*,#106748,.T.); +#106762 = ORIENTED_EDGE('',*,*,#106763,.T.); +#106763 = EDGE_CURVE('',#106741,#106764,#106766,.T.); +#106764 = VERTEX_POINT('',#106765); +#106765 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#106766 = LINE('',#106767,#106768); +#106767 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#106768 = VECTOR('',#106769,1.); +#106769 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106770 = ORIENTED_EDGE('',*,*,#106771,.F.); +#106771 = EDGE_CURVE('',#104813,#106764,#106772,.T.); +#106772 = LINE('',#106773,#106774); +#106773 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#106774 = VECTOR('',#106775,1.); +#106775 = DIRECTION('',(0.,-0.,-1.)); +#106776 = ORIENTED_EDGE('',*,*,#104820,.F.); +#106777 = PLANE('',#106778); +#106778 = AXIS2_PLACEMENT_3D('',#106779,#106780,#106781); +#106779 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#106780 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106781 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106782 = ADVANCED_FACE('',(#106783),#106826,.F.); +#106783 = FACE_BOUND('',#106784,.F.); +#106784 = EDGE_LOOP('',(#106785,#106786,#106787,#106795,#106803,#106811, + #106819,#106825)); +#106785 = ORIENTED_EDGE('',*,*,#104837,.F.); +#106786 = ORIENTED_EDGE('',*,*,#106771,.T.); +#106787 = ORIENTED_EDGE('',*,*,#106788,.T.); +#106788 = EDGE_CURVE('',#106764,#106789,#106791,.T.); +#106789 = VERTEX_POINT('',#106790); +#106790 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#106791 = LINE('',#106792,#106793); +#106792 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#106793 = VECTOR('',#106794,1.); +#106794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106795 = ORIENTED_EDGE('',*,*,#106796,.F.); +#106796 = EDGE_CURVE('',#106797,#106789,#106799,.T.); +#106797 = VERTEX_POINT('',#106798); +#106798 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#106799 = LINE('',#106800,#106801); +#106800 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#106801 = VECTOR('',#106802,1.); +#106802 = DIRECTION('',(-0.,0.,-1.)); +#106803 = ORIENTED_EDGE('',*,*,#106804,.T.); +#106804 = EDGE_CURVE('',#106797,#106805,#106807,.T.); +#106805 = VERTEX_POINT('',#106806); +#106806 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#106807 = LINE('',#106808,#106809); +#106808 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#106809 = VECTOR('',#106810,1.); +#106810 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106811 = ORIENTED_EDGE('',*,*,#106812,.T.); +#106812 = EDGE_CURVE('',#106805,#106813,#106815,.T.); +#106813 = VERTEX_POINT('',#106814); +#106814 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#106815 = LINE('',#106816,#106817); +#106816 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#106817 = VECTOR('',#106818,1.); +#106818 = DIRECTION('',(-0.,0.,-1.)); +#106819 = ORIENTED_EDGE('',*,*,#106820,.T.); +#106820 = EDGE_CURVE('',#106813,#106676,#106821,.T.); +#106821 = LINE('',#106822,#106823); +#106822 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#106823 = VECTOR('',#106824,1.); +#106824 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106825 = ORIENTED_EDGE('',*,*,#106675,.F.); +#106826 = PLANE('',#106827); +#106827 = AXIS2_PLACEMENT_3D('',#106828,#106829,#106830); +#106828 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#106829 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106830 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106831 = ADVANCED_FACE('',(#106832),#106857,.F.); +#106832 = FACE_BOUND('',#106833,.F.); +#106833 = EDGE_LOOP('',(#106834,#106842,#106850,#106856)); +#106834 = ORIENTED_EDGE('',*,*,#106835,.T.); +#106835 = EDGE_CURVE('',#104852,#106836,#106838,.T.); +#106836 = VERTEX_POINT('',#106837); +#106837 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#106838 = LINE('',#106839,#106840); +#106839 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#106840 = VECTOR('',#106841,1.); +#106841 = DIRECTION('',(0.,-0.,-1.)); +#106842 = ORIENTED_EDGE('',*,*,#106843,.T.); +#106843 = EDGE_CURVE('',#106836,#106844,#106846,.T.); +#106844 = VERTEX_POINT('',#106845); +#106845 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#106846 = LINE('',#106847,#106848); +#106847 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#106848 = VECTOR('',#106849,1.); +#106849 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106850 = ORIENTED_EDGE('',*,*,#106851,.F.); +#106851 = EDGE_CURVE('',#104861,#106844,#106852,.T.); +#106852 = LINE('',#106853,#106854); +#106853 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#106854 = VECTOR('',#106855,1.); +#106855 = DIRECTION('',(0.,-0.,-1.)); +#106856 = ORIENTED_EDGE('',*,*,#104868,.F.); +#106857 = PLANE('',#106858); +#106858 = AXIS2_PLACEMENT_3D('',#106859,#106860,#106861); +#106859 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#106860 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106861 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106862 = ADVANCED_FACE('',(#106863),#106913,.F.); +#106863 = FACE_BOUND('',#106864,.F.); +#106864 = EDGE_LOOP('',(#106865,#106866,#106867,#106875,#106883,#106891, + #106899,#106907)); +#106865 = ORIENTED_EDGE('',*,*,#104892,.F.); +#106866 = ORIENTED_EDGE('',*,*,#106851,.T.); +#106867 = ORIENTED_EDGE('',*,*,#106868,.T.); +#106868 = EDGE_CURVE('',#106844,#106869,#106871,.T.); +#106869 = VERTEX_POINT('',#106870); +#106870 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#106871 = LINE('',#106872,#106873); +#106872 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#106873 = VECTOR('',#106874,1.); +#106874 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106875 = ORIENTED_EDGE('',*,*,#106876,.T.); +#106876 = EDGE_CURVE('',#106869,#106877,#106879,.T.); +#106877 = VERTEX_POINT('',#106878); +#106878 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#106879 = LINE('',#106880,#106881); +#106880 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#106881 = VECTOR('',#106882,1.); +#106882 = DIRECTION('',(0.,-0.,1.)); +#106883 = ORIENTED_EDGE('',*,*,#106884,.F.); +#106884 = EDGE_CURVE('',#106885,#106877,#106887,.T.); +#106885 = VERTEX_POINT('',#106886); +#106886 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#106887 = LINE('',#106888,#106889); +#106888 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#106889 = VECTOR('',#106890,1.); +#106890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106891 = ORIENTED_EDGE('',*,*,#106892,.F.); +#106892 = EDGE_CURVE('',#106893,#106885,#106895,.T.); +#106893 = VERTEX_POINT('',#106894); +#106894 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#106895 = LINE('',#106896,#106897); +#106896 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#106897 = VECTOR('',#106898,1.); +#106898 = DIRECTION('',(0.,-0.,1.)); +#106899 = ORIENTED_EDGE('',*,*,#106900,.T.); +#106900 = EDGE_CURVE('',#106893,#106901,#106903,.T.); +#106901 = VERTEX_POINT('',#106902); +#106902 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#106903 = LINE('',#106904,#106905); +#106904 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#106905 = VECTOR('',#106906,1.); +#106906 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106907 = ORIENTED_EDGE('',*,*,#106908,.F.); +#106908 = EDGE_CURVE('',#104885,#106901,#106909,.T.); +#106909 = LINE('',#106910,#106911); +#106910 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#106911 = VECTOR('',#106912,1.); +#106912 = DIRECTION('',(0.,-0.,-1.)); +#106913 = PLANE('',#106914); +#106914 = AXIS2_PLACEMENT_3D('',#106915,#106916,#106917); +#106915 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#106916 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106917 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106918 = ADVANCED_FACE('',(#106919),#106937,.F.); +#106919 = FACE_BOUND('',#106920,.F.); +#106920 = EDGE_LOOP('',(#106921,#106922,#106930,#106936)); +#106921 = ORIENTED_EDGE('',*,*,#106908,.T.); +#106922 = ORIENTED_EDGE('',*,*,#106923,.T.); +#106923 = EDGE_CURVE('',#106901,#106924,#106926,.T.); +#106924 = VERTEX_POINT('',#106925); +#106925 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#106926 = LINE('',#106927,#106928); +#106927 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#106928 = VECTOR('',#106929,1.); +#106929 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106930 = ORIENTED_EDGE('',*,*,#106931,.F.); +#106931 = EDGE_CURVE('',#104909,#106924,#106932,.T.); +#106932 = LINE('',#106933,#106934); +#106933 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#106934 = VECTOR('',#106935,1.); +#106935 = DIRECTION('',(0.,-0.,-1.)); +#106936 = ORIENTED_EDGE('',*,*,#104916,.F.); +#106937 = PLANE('',#106938); +#106938 = AXIS2_PLACEMENT_3D('',#106939,#106940,#106941); +#106939 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#106940 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106941 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106942 = ADVANCED_FACE('',(#106943),#106986,.F.); +#106943 = FACE_BOUND('',#106944,.F.); +#106944 = EDGE_LOOP('',(#106945,#106946,#106947,#106955,#106963,#106971, + #106979,#106985)); +#106945 = ORIENTED_EDGE('',*,*,#104933,.F.); +#106946 = ORIENTED_EDGE('',*,*,#106931,.T.); +#106947 = ORIENTED_EDGE('',*,*,#106948,.T.); +#106948 = EDGE_CURVE('',#106924,#106949,#106951,.T.); +#106949 = VERTEX_POINT('',#106950); +#106950 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#106951 = LINE('',#106952,#106953); +#106952 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#106953 = VECTOR('',#106954,1.); +#106954 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106955 = ORIENTED_EDGE('',*,*,#106956,.F.); +#106956 = EDGE_CURVE('',#106957,#106949,#106959,.T.); +#106957 = VERTEX_POINT('',#106958); +#106958 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#106959 = LINE('',#106960,#106961); +#106960 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#106961 = VECTOR('',#106962,1.); +#106962 = DIRECTION('',(-0.,0.,-1.)); +#106963 = ORIENTED_EDGE('',*,*,#106964,.T.); +#106964 = EDGE_CURVE('',#106957,#106965,#106967,.T.); +#106965 = VERTEX_POINT('',#106966); +#106966 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#106967 = LINE('',#106968,#106969); +#106968 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#106969 = VECTOR('',#106970,1.); +#106970 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106971 = ORIENTED_EDGE('',*,*,#106972,.T.); +#106972 = EDGE_CURVE('',#106965,#106973,#106975,.T.); +#106973 = VERTEX_POINT('',#106974); +#106974 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#106975 = LINE('',#106976,#106977); +#106976 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#106977 = VECTOR('',#106978,1.); +#106978 = DIRECTION('',(-0.,0.,-1.)); +#106979 = ORIENTED_EDGE('',*,*,#106980,.T.); +#106980 = EDGE_CURVE('',#106973,#106836,#106981,.T.); +#106981 = LINE('',#106982,#106983); +#106982 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#106983 = VECTOR('',#106984,1.); +#106984 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106985 = ORIENTED_EDGE('',*,*,#106835,.F.); +#106986 = PLANE('',#106987); +#106987 = AXIS2_PLACEMENT_3D('',#106988,#106989,#106990); +#106988 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#106989 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106990 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106991 = ADVANCED_FACE('',(#106992),#107017,.F.); +#106992 = FACE_BOUND('',#106993,.F.); +#106993 = EDGE_LOOP('',(#106994,#107002,#107010,#107016)); +#106994 = ORIENTED_EDGE('',*,*,#106995,.T.); +#106995 = EDGE_CURVE('',#104948,#106996,#106998,.T.); +#106996 = VERTEX_POINT('',#106997); +#106997 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#106998 = LINE('',#106999,#107000); +#106999 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#107000 = VECTOR('',#107001,1.); +#107001 = DIRECTION('',(0.,-0.,-1.)); +#107002 = ORIENTED_EDGE('',*,*,#107003,.T.); +#107003 = EDGE_CURVE('',#106996,#107004,#107006,.T.); +#107004 = VERTEX_POINT('',#107005); +#107005 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#107006 = LINE('',#107007,#107008); +#107007 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#107008 = VECTOR('',#107009,1.); +#107009 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107010 = ORIENTED_EDGE('',*,*,#107011,.F.); +#107011 = EDGE_CURVE('',#104957,#107004,#107012,.T.); +#107012 = LINE('',#107013,#107014); +#107013 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#107014 = VECTOR('',#107015,1.); +#107015 = DIRECTION('',(0.,-0.,-1.)); +#107016 = ORIENTED_EDGE('',*,*,#104964,.F.); +#107017 = PLANE('',#107018); +#107018 = AXIS2_PLACEMENT_3D('',#107019,#107020,#107021); +#107019 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#107020 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107021 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107022 = ADVANCED_FACE('',(#107023),#107073,.F.); +#107023 = FACE_BOUND('',#107024,.F.); +#107024 = EDGE_LOOP('',(#107025,#107026,#107027,#107035,#107043,#107051, + #107059,#107067)); +#107025 = ORIENTED_EDGE('',*,*,#104988,.F.); +#107026 = ORIENTED_EDGE('',*,*,#107011,.T.); +#107027 = ORIENTED_EDGE('',*,*,#107028,.T.); +#107028 = EDGE_CURVE('',#107004,#107029,#107031,.T.); +#107029 = VERTEX_POINT('',#107030); +#107030 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#107031 = LINE('',#107032,#107033); +#107032 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#107033 = VECTOR('',#107034,1.); +#107034 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107035 = ORIENTED_EDGE('',*,*,#107036,.T.); +#107036 = EDGE_CURVE('',#107029,#107037,#107039,.T.); +#107037 = VERTEX_POINT('',#107038); +#107038 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#107039 = LINE('',#107040,#107041); +#107040 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#107041 = VECTOR('',#107042,1.); +#107042 = DIRECTION('',(0.,-0.,1.)); +#107043 = ORIENTED_EDGE('',*,*,#107044,.F.); +#107044 = EDGE_CURVE('',#107045,#107037,#107047,.T.); +#107045 = VERTEX_POINT('',#107046); +#107046 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#107047 = LINE('',#107048,#107049); +#107048 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#107049 = VECTOR('',#107050,1.); +#107050 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107051 = ORIENTED_EDGE('',*,*,#107052,.F.); +#107052 = EDGE_CURVE('',#107053,#107045,#107055,.T.); +#107053 = VERTEX_POINT('',#107054); +#107054 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#107055 = LINE('',#107056,#107057); +#107056 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#107057 = VECTOR('',#107058,1.); +#107058 = DIRECTION('',(0.,-0.,1.)); +#107059 = ORIENTED_EDGE('',*,*,#107060,.T.); +#107060 = EDGE_CURVE('',#107053,#107061,#107063,.T.); +#107061 = VERTEX_POINT('',#107062); +#107062 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#107063 = LINE('',#107064,#107065); +#107064 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#107065 = VECTOR('',#107066,1.); +#107066 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107067 = ORIENTED_EDGE('',*,*,#107068,.F.); +#107068 = EDGE_CURVE('',#104981,#107061,#107069,.T.); +#107069 = LINE('',#107070,#107071); +#107070 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#107071 = VECTOR('',#107072,1.); +#107072 = DIRECTION('',(0.,-0.,-1.)); +#107073 = PLANE('',#107074); +#107074 = AXIS2_PLACEMENT_3D('',#107075,#107076,#107077); +#107075 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#107076 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107077 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107078 = ADVANCED_FACE('',(#107079),#107097,.F.); +#107079 = FACE_BOUND('',#107080,.F.); +#107080 = EDGE_LOOP('',(#107081,#107082,#107090,#107096)); +#107081 = ORIENTED_EDGE('',*,*,#107068,.T.); +#107082 = ORIENTED_EDGE('',*,*,#107083,.T.); +#107083 = EDGE_CURVE('',#107061,#107084,#107086,.T.); +#107084 = VERTEX_POINT('',#107085); +#107085 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#107086 = LINE('',#107087,#107088); +#107087 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#107088 = VECTOR('',#107089,1.); +#107089 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107090 = ORIENTED_EDGE('',*,*,#107091,.F.); +#107091 = EDGE_CURVE('',#105005,#107084,#107092,.T.); +#107092 = LINE('',#107093,#107094); +#107093 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#107094 = VECTOR('',#107095,1.); +#107095 = DIRECTION('',(0.,-0.,-1.)); +#107096 = ORIENTED_EDGE('',*,*,#105012,.F.); +#107097 = PLANE('',#107098); +#107098 = AXIS2_PLACEMENT_3D('',#107099,#107100,#107101); +#107099 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#107100 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107101 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107102 = ADVANCED_FACE('',(#107103),#107146,.F.); +#107103 = FACE_BOUND('',#107104,.F.); +#107104 = EDGE_LOOP('',(#107105,#107106,#107107,#107115,#107123,#107131, + #107139,#107145)); +#107105 = ORIENTED_EDGE('',*,*,#105029,.F.); +#107106 = ORIENTED_EDGE('',*,*,#107091,.T.); +#107107 = ORIENTED_EDGE('',*,*,#107108,.T.); +#107108 = EDGE_CURVE('',#107084,#107109,#107111,.T.); +#107109 = VERTEX_POINT('',#107110); +#107110 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#107111 = LINE('',#107112,#107113); +#107112 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#107113 = VECTOR('',#107114,1.); +#107114 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107115 = ORIENTED_EDGE('',*,*,#107116,.F.); +#107116 = EDGE_CURVE('',#107117,#107109,#107119,.T.); +#107117 = VERTEX_POINT('',#107118); +#107118 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#107119 = LINE('',#107120,#107121); +#107120 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#107121 = VECTOR('',#107122,1.); +#107122 = DIRECTION('',(-0.,0.,-1.)); +#107123 = ORIENTED_EDGE('',*,*,#107124,.T.); +#107124 = EDGE_CURVE('',#107117,#107125,#107127,.T.); +#107125 = VERTEX_POINT('',#107126); +#107126 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#107127 = LINE('',#107128,#107129); +#107128 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#107129 = VECTOR('',#107130,1.); +#107130 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107131 = ORIENTED_EDGE('',*,*,#107132,.T.); +#107132 = EDGE_CURVE('',#107125,#107133,#107135,.T.); +#107133 = VERTEX_POINT('',#107134); +#107134 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#107135 = LINE('',#107136,#107137); +#107136 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#107137 = VECTOR('',#107138,1.); +#107138 = DIRECTION('',(-0.,0.,-1.)); +#107139 = ORIENTED_EDGE('',*,*,#107140,.T.); +#107140 = EDGE_CURVE('',#107133,#106996,#107141,.T.); +#107141 = LINE('',#107142,#107143); +#107142 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#107143 = VECTOR('',#107144,1.); +#107144 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107145 = ORIENTED_EDGE('',*,*,#106995,.F.); +#107146 = PLANE('',#107147); +#107147 = AXIS2_PLACEMENT_3D('',#107148,#107149,#107150); +#107148 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#107149 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107150 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107151 = ADVANCED_FACE('',(#107152),#107177,.F.); +#107152 = FACE_BOUND('',#107153,.F.); +#107153 = EDGE_LOOP('',(#107154,#107162,#107170,#107176)); +#107154 = ORIENTED_EDGE('',*,*,#107155,.T.); +#107155 = EDGE_CURVE('',#105044,#107156,#107158,.T.); +#107156 = VERTEX_POINT('',#107157); +#107157 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#107158 = LINE('',#107159,#107160); +#107159 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#107160 = VECTOR('',#107161,1.); +#107161 = DIRECTION('',(0.,-0.,-1.)); +#107162 = ORIENTED_EDGE('',*,*,#107163,.T.); +#107163 = EDGE_CURVE('',#107156,#107164,#107166,.T.); +#107164 = VERTEX_POINT('',#107165); +#107165 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#107166 = LINE('',#107167,#107168); +#107167 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#107168 = VECTOR('',#107169,1.); +#107169 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107170 = ORIENTED_EDGE('',*,*,#107171,.F.); +#107171 = EDGE_CURVE('',#105053,#107164,#107172,.T.); +#107172 = LINE('',#107173,#107174); +#107173 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#107174 = VECTOR('',#107175,1.); +#107175 = DIRECTION('',(0.,-0.,-1.)); +#107176 = ORIENTED_EDGE('',*,*,#105060,.F.); +#107177 = PLANE('',#107178); +#107178 = AXIS2_PLACEMENT_3D('',#107179,#107180,#107181); +#107179 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#107180 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107181 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107182 = ADVANCED_FACE('',(#107183),#107233,.F.); +#107183 = FACE_BOUND('',#107184,.F.); +#107184 = EDGE_LOOP('',(#107185,#107186,#107187,#107195,#107203,#107211, + #107219,#107227)); +#107185 = ORIENTED_EDGE('',*,*,#105084,.F.); +#107186 = ORIENTED_EDGE('',*,*,#107171,.T.); +#107187 = ORIENTED_EDGE('',*,*,#107188,.T.); +#107188 = EDGE_CURVE('',#107164,#107189,#107191,.T.); +#107189 = VERTEX_POINT('',#107190); +#107190 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#107191 = LINE('',#107192,#107193); +#107192 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#107193 = VECTOR('',#107194,1.); +#107194 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107195 = ORIENTED_EDGE('',*,*,#107196,.T.); +#107196 = EDGE_CURVE('',#107189,#107197,#107199,.T.); +#107197 = VERTEX_POINT('',#107198); +#107198 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#107199 = LINE('',#107200,#107201); +#107200 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#107201 = VECTOR('',#107202,1.); +#107202 = DIRECTION('',(0.,-0.,1.)); +#107203 = ORIENTED_EDGE('',*,*,#107204,.F.); +#107204 = EDGE_CURVE('',#107205,#107197,#107207,.T.); +#107205 = VERTEX_POINT('',#107206); +#107206 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#107207 = LINE('',#107208,#107209); +#107208 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#107209 = VECTOR('',#107210,1.); +#107210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107211 = ORIENTED_EDGE('',*,*,#107212,.F.); +#107212 = EDGE_CURVE('',#107213,#107205,#107215,.T.); +#107213 = VERTEX_POINT('',#107214); +#107214 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#107215 = LINE('',#107216,#107217); +#107216 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#107217 = VECTOR('',#107218,1.); +#107218 = DIRECTION('',(0.,-0.,1.)); +#107219 = ORIENTED_EDGE('',*,*,#107220,.T.); +#107220 = EDGE_CURVE('',#107213,#107221,#107223,.T.); +#107221 = VERTEX_POINT('',#107222); +#107222 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#107223 = LINE('',#107224,#107225); +#107224 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#107225 = VECTOR('',#107226,1.); +#107226 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107227 = ORIENTED_EDGE('',*,*,#107228,.F.); +#107228 = EDGE_CURVE('',#105077,#107221,#107229,.T.); +#107229 = LINE('',#107230,#107231); +#107230 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#107231 = VECTOR('',#107232,1.); +#107232 = DIRECTION('',(0.,-0.,-1.)); +#107233 = PLANE('',#107234); +#107234 = AXIS2_PLACEMENT_3D('',#107235,#107236,#107237); +#107235 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#107236 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107237 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107238 = ADVANCED_FACE('',(#107239),#107257,.F.); +#107239 = FACE_BOUND('',#107240,.F.); +#107240 = EDGE_LOOP('',(#107241,#107242,#107250,#107256)); +#107241 = ORIENTED_EDGE('',*,*,#107228,.T.); +#107242 = ORIENTED_EDGE('',*,*,#107243,.T.); +#107243 = EDGE_CURVE('',#107221,#107244,#107246,.T.); +#107244 = VERTEX_POINT('',#107245); +#107245 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#107246 = LINE('',#107247,#107248); +#107247 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#107248 = VECTOR('',#107249,1.); +#107249 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107250 = ORIENTED_EDGE('',*,*,#107251,.F.); +#107251 = EDGE_CURVE('',#105101,#107244,#107252,.T.); +#107252 = LINE('',#107253,#107254); +#107253 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#107254 = VECTOR('',#107255,1.); +#107255 = DIRECTION('',(0.,-0.,-1.)); +#107256 = ORIENTED_EDGE('',*,*,#105108,.F.); +#107257 = PLANE('',#107258); +#107258 = AXIS2_PLACEMENT_3D('',#107259,#107260,#107261); +#107259 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#107260 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107261 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107262 = ADVANCED_FACE('',(#107263),#107306,.F.); +#107263 = FACE_BOUND('',#107264,.F.); +#107264 = EDGE_LOOP('',(#107265,#107266,#107267,#107275,#107283,#107291, + #107299,#107305)); +#107265 = ORIENTED_EDGE('',*,*,#105125,.F.); +#107266 = ORIENTED_EDGE('',*,*,#107251,.T.); +#107267 = ORIENTED_EDGE('',*,*,#107268,.T.); +#107268 = EDGE_CURVE('',#107244,#107269,#107271,.T.); +#107269 = VERTEX_POINT('',#107270); +#107270 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#107271 = LINE('',#107272,#107273); +#107272 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#107273 = VECTOR('',#107274,1.); +#107274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107275 = ORIENTED_EDGE('',*,*,#107276,.F.); +#107276 = EDGE_CURVE('',#107277,#107269,#107279,.T.); +#107277 = VERTEX_POINT('',#107278); +#107278 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#107279 = LINE('',#107280,#107281); +#107280 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#107281 = VECTOR('',#107282,1.); +#107282 = DIRECTION('',(-0.,0.,-1.)); +#107283 = ORIENTED_EDGE('',*,*,#107284,.T.); +#107284 = EDGE_CURVE('',#107277,#107285,#107287,.T.); +#107285 = VERTEX_POINT('',#107286); +#107286 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#107287 = LINE('',#107288,#107289); +#107288 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#107289 = VECTOR('',#107290,1.); +#107290 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107291 = ORIENTED_EDGE('',*,*,#107292,.T.); +#107292 = EDGE_CURVE('',#107285,#107293,#107295,.T.); +#107293 = VERTEX_POINT('',#107294); +#107294 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#107295 = LINE('',#107296,#107297); +#107296 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#107297 = VECTOR('',#107298,1.); +#107298 = DIRECTION('',(-0.,0.,-1.)); +#107299 = ORIENTED_EDGE('',*,*,#107300,.T.); +#107300 = EDGE_CURVE('',#107293,#107156,#107301,.T.); +#107301 = LINE('',#107302,#107303); +#107302 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#107303 = VECTOR('',#107304,1.); +#107304 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107305 = ORIENTED_EDGE('',*,*,#107155,.F.); +#107306 = PLANE('',#107307); +#107307 = AXIS2_PLACEMENT_3D('',#107308,#107309,#107310); +#107308 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#107309 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107310 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107311 = ADVANCED_FACE('',(#107312),#107337,.F.); +#107312 = FACE_BOUND('',#107313,.F.); +#107313 = EDGE_LOOP('',(#107314,#107322,#107330,#107336)); +#107314 = ORIENTED_EDGE('',*,*,#107315,.T.); +#107315 = EDGE_CURVE('',#105140,#107316,#107318,.T.); +#107316 = VERTEX_POINT('',#107317); +#107317 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#107318 = LINE('',#107319,#107320); +#107319 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#107320 = VECTOR('',#107321,1.); +#107321 = DIRECTION('',(0.,-0.,-1.)); +#107322 = ORIENTED_EDGE('',*,*,#107323,.T.); +#107323 = EDGE_CURVE('',#107316,#107324,#107326,.T.); +#107324 = VERTEX_POINT('',#107325); +#107325 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#107326 = LINE('',#107327,#107328); +#107327 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#107328 = VECTOR('',#107329,1.); +#107329 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107330 = ORIENTED_EDGE('',*,*,#107331,.F.); +#107331 = EDGE_CURVE('',#105149,#107324,#107332,.T.); +#107332 = LINE('',#107333,#107334); +#107333 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#107334 = VECTOR('',#107335,1.); +#107335 = DIRECTION('',(0.,-0.,-1.)); +#107336 = ORIENTED_EDGE('',*,*,#105156,.F.); +#107337 = PLANE('',#107338); +#107338 = AXIS2_PLACEMENT_3D('',#107339,#107340,#107341); +#107339 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#107340 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107341 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107342 = ADVANCED_FACE('',(#107343),#107393,.F.); +#107343 = FACE_BOUND('',#107344,.F.); +#107344 = EDGE_LOOP('',(#107345,#107346,#107347,#107355,#107363,#107371, + #107379,#107387)); +#107345 = ORIENTED_EDGE('',*,*,#105180,.F.); +#107346 = ORIENTED_EDGE('',*,*,#107331,.T.); +#107347 = ORIENTED_EDGE('',*,*,#107348,.T.); +#107348 = EDGE_CURVE('',#107324,#107349,#107351,.T.); +#107349 = VERTEX_POINT('',#107350); +#107350 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#107351 = LINE('',#107352,#107353); +#107352 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#107353 = VECTOR('',#107354,1.); +#107354 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107355 = ORIENTED_EDGE('',*,*,#107356,.T.); +#107356 = EDGE_CURVE('',#107349,#107357,#107359,.T.); +#107357 = VERTEX_POINT('',#107358); +#107358 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#107359 = LINE('',#107360,#107361); +#107360 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#107361 = VECTOR('',#107362,1.); +#107362 = DIRECTION('',(0.,-0.,1.)); +#107363 = ORIENTED_EDGE('',*,*,#107364,.F.); +#107364 = EDGE_CURVE('',#107365,#107357,#107367,.T.); +#107365 = VERTEX_POINT('',#107366); +#107366 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#107367 = LINE('',#107368,#107369); +#107368 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#107369 = VECTOR('',#107370,1.); +#107370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107371 = ORIENTED_EDGE('',*,*,#107372,.F.); +#107372 = EDGE_CURVE('',#107373,#107365,#107375,.T.); +#107373 = VERTEX_POINT('',#107374); +#107374 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#107375 = LINE('',#107376,#107377); +#107376 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#107377 = VECTOR('',#107378,1.); +#107378 = DIRECTION('',(0.,-0.,1.)); +#107379 = ORIENTED_EDGE('',*,*,#107380,.T.); +#107380 = EDGE_CURVE('',#107373,#107381,#107383,.T.); +#107381 = VERTEX_POINT('',#107382); +#107382 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#107383 = LINE('',#107384,#107385); +#107384 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#107385 = VECTOR('',#107386,1.); +#107386 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107387 = ORIENTED_EDGE('',*,*,#107388,.F.); +#107388 = EDGE_CURVE('',#105173,#107381,#107389,.T.); +#107389 = LINE('',#107390,#107391); +#107390 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#107391 = VECTOR('',#107392,1.); +#107392 = DIRECTION('',(0.,-0.,-1.)); +#107393 = PLANE('',#107394); +#107394 = AXIS2_PLACEMENT_3D('',#107395,#107396,#107397); +#107395 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#107396 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107397 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107398 = ADVANCED_FACE('',(#107399),#107417,.F.); +#107399 = FACE_BOUND('',#107400,.F.); +#107400 = EDGE_LOOP('',(#107401,#107402,#107410,#107416)); +#107401 = ORIENTED_EDGE('',*,*,#107388,.T.); +#107402 = ORIENTED_EDGE('',*,*,#107403,.T.); +#107403 = EDGE_CURVE('',#107381,#107404,#107406,.T.); +#107404 = VERTEX_POINT('',#107405); +#107405 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#107406 = LINE('',#107407,#107408); +#107407 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#107408 = VECTOR('',#107409,1.); +#107409 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107410 = ORIENTED_EDGE('',*,*,#107411,.F.); +#107411 = EDGE_CURVE('',#105197,#107404,#107412,.T.); +#107412 = LINE('',#107413,#107414); +#107413 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#107414 = VECTOR('',#107415,1.); +#107415 = DIRECTION('',(0.,-0.,-1.)); +#107416 = ORIENTED_EDGE('',*,*,#105204,.F.); +#107417 = PLANE('',#107418); +#107418 = AXIS2_PLACEMENT_3D('',#107419,#107420,#107421); +#107419 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#107420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107421 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107422 = ADVANCED_FACE('',(#107423),#107466,.F.); +#107423 = FACE_BOUND('',#107424,.F.); +#107424 = EDGE_LOOP('',(#107425,#107426,#107427,#107435,#107443,#107451, + #107459,#107465)); +#107425 = ORIENTED_EDGE('',*,*,#105221,.F.); +#107426 = ORIENTED_EDGE('',*,*,#107411,.T.); +#107427 = ORIENTED_EDGE('',*,*,#107428,.T.); +#107428 = EDGE_CURVE('',#107404,#107429,#107431,.T.); +#107429 = VERTEX_POINT('',#107430); +#107430 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#107431 = LINE('',#107432,#107433); +#107432 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#107433 = VECTOR('',#107434,1.); +#107434 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107435 = ORIENTED_EDGE('',*,*,#107436,.F.); +#107436 = EDGE_CURVE('',#107437,#107429,#107439,.T.); +#107437 = VERTEX_POINT('',#107438); +#107438 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#107439 = LINE('',#107440,#107441); +#107440 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#107441 = VECTOR('',#107442,1.); +#107442 = DIRECTION('',(-0.,0.,-1.)); +#107443 = ORIENTED_EDGE('',*,*,#107444,.T.); +#107444 = EDGE_CURVE('',#107437,#107445,#107447,.T.); +#107445 = VERTEX_POINT('',#107446); +#107446 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#107447 = LINE('',#107448,#107449); +#107448 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#107449 = VECTOR('',#107450,1.); +#107450 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107451 = ORIENTED_EDGE('',*,*,#107452,.T.); +#107452 = EDGE_CURVE('',#107445,#107453,#107455,.T.); +#107453 = VERTEX_POINT('',#107454); +#107454 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#107455 = LINE('',#107456,#107457); +#107456 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#107457 = VECTOR('',#107458,1.); +#107458 = DIRECTION('',(-0.,0.,-1.)); +#107459 = ORIENTED_EDGE('',*,*,#107460,.T.); +#107460 = EDGE_CURVE('',#107453,#107316,#107461,.T.); +#107461 = LINE('',#107462,#107463); +#107462 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#107463 = VECTOR('',#107464,1.); +#107464 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107465 = ORIENTED_EDGE('',*,*,#107315,.F.); +#107466 = PLANE('',#107467); +#107467 = AXIS2_PLACEMENT_3D('',#107468,#107469,#107470); +#107468 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#107469 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107470 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107471 = ADVANCED_FACE('',(#107472),#107497,.F.); +#107472 = FACE_BOUND('',#107473,.F.); +#107473 = EDGE_LOOP('',(#107474,#107482,#107490,#107496)); +#107474 = ORIENTED_EDGE('',*,*,#107475,.T.); +#107475 = EDGE_CURVE('',#105236,#107476,#107478,.T.); +#107476 = VERTEX_POINT('',#107477); +#107477 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#107478 = LINE('',#107479,#107480); +#107479 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#107480 = VECTOR('',#107481,1.); +#107481 = DIRECTION('',(0.,-0.,-1.)); +#107482 = ORIENTED_EDGE('',*,*,#107483,.T.); +#107483 = EDGE_CURVE('',#107476,#107484,#107486,.T.); +#107484 = VERTEX_POINT('',#107485); +#107485 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#107486 = LINE('',#107487,#107488); +#107487 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#107488 = VECTOR('',#107489,1.); +#107489 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107490 = ORIENTED_EDGE('',*,*,#107491,.F.); +#107491 = EDGE_CURVE('',#105245,#107484,#107492,.T.); +#107492 = LINE('',#107493,#107494); +#107493 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#107494 = VECTOR('',#107495,1.); +#107495 = DIRECTION('',(0.,-0.,-1.)); +#107496 = ORIENTED_EDGE('',*,*,#105252,.F.); +#107497 = PLANE('',#107498); +#107498 = AXIS2_PLACEMENT_3D('',#107499,#107500,#107501); +#107499 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#107500 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107501 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107502 = ADVANCED_FACE('',(#107503),#107553,.F.); +#107503 = FACE_BOUND('',#107504,.F.); +#107504 = EDGE_LOOP('',(#107505,#107506,#107507,#107515,#107523,#107531, + #107539,#107547)); +#107505 = ORIENTED_EDGE('',*,*,#105276,.F.); +#107506 = ORIENTED_EDGE('',*,*,#107491,.T.); +#107507 = ORIENTED_EDGE('',*,*,#107508,.T.); +#107508 = EDGE_CURVE('',#107484,#107509,#107511,.T.); +#107509 = VERTEX_POINT('',#107510); +#107510 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#107511 = LINE('',#107512,#107513); +#107512 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#107513 = VECTOR('',#107514,1.); +#107514 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107515 = ORIENTED_EDGE('',*,*,#107516,.T.); +#107516 = EDGE_CURVE('',#107509,#107517,#107519,.T.); +#107517 = VERTEX_POINT('',#107518); +#107518 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#107519 = LINE('',#107520,#107521); +#107520 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#107521 = VECTOR('',#107522,1.); +#107522 = DIRECTION('',(0.,-0.,1.)); +#107523 = ORIENTED_EDGE('',*,*,#107524,.F.); +#107524 = EDGE_CURVE('',#107525,#107517,#107527,.T.); +#107525 = VERTEX_POINT('',#107526); +#107526 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#107527 = LINE('',#107528,#107529); +#107528 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#107529 = VECTOR('',#107530,1.); +#107530 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107531 = ORIENTED_EDGE('',*,*,#107532,.F.); +#107532 = EDGE_CURVE('',#107533,#107525,#107535,.T.); +#107533 = VERTEX_POINT('',#107534); +#107534 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#107535 = LINE('',#107536,#107537); +#107536 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#107537 = VECTOR('',#107538,1.); +#107538 = DIRECTION('',(0.,-0.,1.)); +#107539 = ORIENTED_EDGE('',*,*,#107540,.T.); +#107540 = EDGE_CURVE('',#107533,#107541,#107543,.T.); +#107541 = VERTEX_POINT('',#107542); +#107542 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#107543 = LINE('',#107544,#107545); +#107544 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#107545 = VECTOR('',#107546,1.); +#107546 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107547 = ORIENTED_EDGE('',*,*,#107548,.F.); +#107548 = EDGE_CURVE('',#105269,#107541,#107549,.T.); +#107549 = LINE('',#107550,#107551); +#107550 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#107551 = VECTOR('',#107552,1.); +#107552 = DIRECTION('',(0.,-0.,-1.)); +#107553 = PLANE('',#107554); +#107554 = AXIS2_PLACEMENT_3D('',#107555,#107556,#107557); +#107555 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#107556 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107557 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107558 = ADVANCED_FACE('',(#107559),#107577,.F.); +#107559 = FACE_BOUND('',#107560,.F.); +#107560 = EDGE_LOOP('',(#107561,#107562,#107570,#107576)); +#107561 = ORIENTED_EDGE('',*,*,#107548,.T.); +#107562 = ORIENTED_EDGE('',*,*,#107563,.T.); +#107563 = EDGE_CURVE('',#107541,#107564,#107566,.T.); +#107564 = VERTEX_POINT('',#107565); +#107565 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#107566 = LINE('',#107567,#107568); +#107567 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#107568 = VECTOR('',#107569,1.); +#107569 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107570 = ORIENTED_EDGE('',*,*,#107571,.F.); +#107571 = EDGE_CURVE('',#105293,#107564,#107572,.T.); +#107572 = LINE('',#107573,#107574); +#107573 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#107574 = VECTOR('',#107575,1.); +#107575 = DIRECTION('',(0.,-0.,-1.)); +#107576 = ORIENTED_EDGE('',*,*,#105300,.F.); +#107577 = PLANE('',#107578); +#107578 = AXIS2_PLACEMENT_3D('',#107579,#107580,#107581); +#107579 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#107580 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107581 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107582 = ADVANCED_FACE('',(#107583),#107626,.F.); +#107583 = FACE_BOUND('',#107584,.F.); +#107584 = EDGE_LOOP('',(#107585,#107586,#107587,#107595,#107603,#107611, + #107619,#107625)); +#107585 = ORIENTED_EDGE('',*,*,#105317,.F.); +#107586 = ORIENTED_EDGE('',*,*,#107571,.T.); +#107587 = ORIENTED_EDGE('',*,*,#107588,.T.); +#107588 = EDGE_CURVE('',#107564,#107589,#107591,.T.); +#107589 = VERTEX_POINT('',#107590); +#107590 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#107591 = LINE('',#107592,#107593); +#107592 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#107593 = VECTOR('',#107594,1.); +#107594 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107595 = ORIENTED_EDGE('',*,*,#107596,.F.); +#107596 = EDGE_CURVE('',#107597,#107589,#107599,.T.); +#107597 = VERTEX_POINT('',#107598); +#107598 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#107599 = LINE('',#107600,#107601); +#107600 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#107601 = VECTOR('',#107602,1.); +#107602 = DIRECTION('',(-0.,0.,-1.)); +#107603 = ORIENTED_EDGE('',*,*,#107604,.T.); +#107604 = EDGE_CURVE('',#107597,#107605,#107607,.T.); +#107605 = VERTEX_POINT('',#107606); +#107606 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#107607 = LINE('',#107608,#107609); +#107608 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#107609 = VECTOR('',#107610,1.); +#107610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107611 = ORIENTED_EDGE('',*,*,#107612,.T.); +#107612 = EDGE_CURVE('',#107605,#107613,#107615,.T.); +#107613 = VERTEX_POINT('',#107614); +#107614 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#107615 = LINE('',#107616,#107617); +#107616 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#107617 = VECTOR('',#107618,1.); +#107618 = DIRECTION('',(-0.,0.,-1.)); +#107619 = ORIENTED_EDGE('',*,*,#107620,.T.); +#107620 = EDGE_CURVE('',#107613,#107476,#107621,.T.); +#107621 = LINE('',#107622,#107623); +#107622 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#107623 = VECTOR('',#107624,1.); +#107624 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107625 = ORIENTED_EDGE('',*,*,#107475,.F.); +#107626 = PLANE('',#107627); +#107627 = AXIS2_PLACEMENT_3D('',#107628,#107629,#107630); +#107628 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#107629 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107631 = ADVANCED_FACE('',(#107632),#107643,.T.); +#107632 = FACE_BOUND('',#107633,.T.); +#107633 = EDGE_LOOP('',(#107634,#107640,#107641,#107642)); +#107634 = ORIENTED_EDGE('',*,*,#107635,.T.); +#107635 = EDGE_CURVE('',#105413,#105349,#107636,.T.); +#107636 = LINE('',#107637,#107638); +#107637 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#107638 = VECTOR('',#107639,1.); +#107639 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107640 = ORIENTED_EDGE('',*,*,#105348,.T.); +#107641 = ORIENTED_EDGE('',*,*,#105333,.F.); +#107642 = ORIENTED_EDGE('',*,*,#105412,.F.); +#107643 = PLANE('',#107644); +#107644 = AXIS2_PLACEMENT_3D('',#107645,#107646,#107647); +#107645 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#107646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107647 = DIRECTION('',(0.,0.,1.)); +#107648 = ADVANCED_FACE('',(#107649),#107660,.T.); +#107649 = FACE_BOUND('',#107650,.T.); +#107650 = EDGE_LOOP('',(#107651,#107657,#107658,#107659)); +#107651 = ORIENTED_EDGE('',*,*,#107652,.T.); +#107652 = EDGE_CURVE('',#105438,#105374,#107653,.T.); +#107653 = LINE('',#107654,#107655); +#107654 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#107655 = VECTOR('',#107656,1.); +#107656 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107657 = ORIENTED_EDGE('',*,*,#105381,.T.); +#107658 = ORIENTED_EDGE('',*,*,#107635,.F.); +#107659 = ORIENTED_EDGE('',*,*,#105445,.F.); +#107660 = PLANE('',#107661); +#107661 = AXIS2_PLACEMENT_3D('',#107662,#107663,#107664); +#107662 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#107663 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107664 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107665 = ADVANCED_FACE('',(#107666),#107677,.T.); +#107666 = FACE_BOUND('',#107667,.T.); +#107667 = EDGE_LOOP('',(#107668,#107674,#107675,#107676)); +#107668 = ORIENTED_EDGE('',*,*,#107669,.T.); +#107669 = EDGE_CURVE('',#105430,#105366,#107670,.T.); +#107670 = LINE('',#107671,#107672); +#107671 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#107672 = VECTOR('',#107673,1.); +#107673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107674 = ORIENTED_EDGE('',*,*,#105373,.T.); +#107675 = ORIENTED_EDGE('',*,*,#107652,.F.); +#107676 = ORIENTED_EDGE('',*,*,#105437,.T.); +#107677 = PLANE('',#107678); +#107678 = AXIS2_PLACEMENT_3D('',#107679,#107680,#107681); +#107679 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#107680 = DIRECTION('',(0.,-0.,-1.)); +#107681 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107682 = ADVANCED_FACE('',(#107683),#107694,.T.); +#107683 = FACE_BOUND('',#107684,.T.); +#107684 = EDGE_LOOP('',(#107685,#107691,#107692,#107693)); +#107685 = ORIENTED_EDGE('',*,*,#107686,.T.); +#107686 = EDGE_CURVE('',#105422,#105358,#107687,.T.); +#107687 = LINE('',#107688,#107689); +#107688 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#107689 = VECTOR('',#107690,1.); +#107690 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107691 = ORIENTED_EDGE('',*,*,#105365,.T.); +#107692 = ORIENTED_EDGE('',*,*,#107669,.F.); +#107693 = ORIENTED_EDGE('',*,*,#105429,.F.); +#107694 = PLANE('',#107695); +#107695 = AXIS2_PLACEMENT_3D('',#107696,#107697,#107698); +#107696 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#107697 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107698 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107699 = ADVANCED_FACE('',(#107700),#107706,.T.); +#107700 = FACE_BOUND('',#107701,.T.); +#107701 = EDGE_LOOP('',(#107702,#107703,#107704,#107705)); +#107702 = ORIENTED_EDGE('',*,*,#105395,.T.); +#107703 = ORIENTED_EDGE('',*,*,#105357,.T.); +#107704 = ORIENTED_EDGE('',*,*,#107686,.F.); +#107705 = ORIENTED_EDGE('',*,*,#105421,.F.); +#107706 = PLANE('',#107707); +#107707 = AXIS2_PLACEMENT_3D('',#107708,#107709,#107710); +#107708 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#107709 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107710 = DIRECTION('',(0.,0.,-1.)); +#107711 = ADVANCED_FACE('',(#107712),#107723,.T.); +#107712 = FACE_BOUND('',#107713,.T.); +#107713 = EDGE_LOOP('',(#107714,#107720,#107721,#107722)); +#107714 = ORIENTED_EDGE('',*,*,#107715,.T.); +#107715 = EDGE_CURVE('',#105541,#105477,#107716,.T.); +#107716 = LINE('',#107717,#107718); +#107717 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#107718 = VECTOR('',#107719,1.); +#107719 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107720 = ORIENTED_EDGE('',*,*,#105476,.T.); +#107721 = ORIENTED_EDGE('',*,*,#105461,.F.); +#107722 = ORIENTED_EDGE('',*,*,#105540,.F.); +#107723 = PLANE('',#107724); +#107724 = AXIS2_PLACEMENT_3D('',#107725,#107726,#107727); +#107725 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#107726 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107727 = DIRECTION('',(0.,0.,1.)); +#107728 = ADVANCED_FACE('',(#107729),#107740,.T.); +#107729 = FACE_BOUND('',#107730,.T.); +#107730 = EDGE_LOOP('',(#107731,#107737,#107738,#107739)); +#107731 = ORIENTED_EDGE('',*,*,#107732,.T.); +#107732 = EDGE_CURVE('',#105566,#105502,#107733,.T.); +#107733 = LINE('',#107734,#107735); +#107734 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#107735 = VECTOR('',#107736,1.); +#107736 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107737 = ORIENTED_EDGE('',*,*,#105509,.T.); +#107738 = ORIENTED_EDGE('',*,*,#107715,.F.); +#107739 = ORIENTED_EDGE('',*,*,#105573,.F.); +#107740 = PLANE('',#107741); +#107741 = AXIS2_PLACEMENT_3D('',#107742,#107743,#107744); +#107742 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#107743 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107744 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107745 = ADVANCED_FACE('',(#107746),#107757,.T.); +#107746 = FACE_BOUND('',#107747,.T.); +#107747 = EDGE_LOOP('',(#107748,#107754,#107755,#107756)); +#107748 = ORIENTED_EDGE('',*,*,#107749,.T.); +#107749 = EDGE_CURVE('',#105558,#105494,#107750,.T.); +#107750 = LINE('',#107751,#107752); +#107751 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#107752 = VECTOR('',#107753,1.); +#107753 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107754 = ORIENTED_EDGE('',*,*,#105501,.T.); +#107755 = ORIENTED_EDGE('',*,*,#107732,.F.); +#107756 = ORIENTED_EDGE('',*,*,#105565,.T.); +#107757 = PLANE('',#107758); +#107758 = AXIS2_PLACEMENT_3D('',#107759,#107760,#107761); +#107759 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#107760 = DIRECTION('',(0.,-0.,-1.)); +#107761 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107762 = ADVANCED_FACE('',(#107763),#107774,.T.); +#107763 = FACE_BOUND('',#107764,.T.); +#107764 = EDGE_LOOP('',(#107765,#107771,#107772,#107773)); +#107765 = ORIENTED_EDGE('',*,*,#107766,.T.); +#107766 = EDGE_CURVE('',#105550,#105486,#107767,.T.); +#107767 = LINE('',#107768,#107769); +#107768 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#107769 = VECTOR('',#107770,1.); +#107770 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107771 = ORIENTED_EDGE('',*,*,#105493,.T.); +#107772 = ORIENTED_EDGE('',*,*,#107749,.F.); +#107773 = ORIENTED_EDGE('',*,*,#105557,.F.); +#107774 = PLANE('',#107775); +#107775 = AXIS2_PLACEMENT_3D('',#107776,#107777,#107778); +#107776 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#107777 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107778 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107779 = ADVANCED_FACE('',(#107780),#107786,.T.); +#107780 = FACE_BOUND('',#107781,.T.); +#107781 = EDGE_LOOP('',(#107782,#107783,#107784,#107785)); +#107782 = ORIENTED_EDGE('',*,*,#105523,.T.); +#107783 = ORIENTED_EDGE('',*,*,#105485,.T.); +#107784 = ORIENTED_EDGE('',*,*,#107766,.F.); +#107785 = ORIENTED_EDGE('',*,*,#105549,.F.); +#107786 = PLANE('',#107787); +#107787 = AXIS2_PLACEMENT_3D('',#107788,#107789,#107790); +#107788 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#107789 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107790 = DIRECTION('',(0.,0.,-1.)); +#107791 = ADVANCED_FACE('',(#107792),#107803,.T.); +#107792 = FACE_BOUND('',#107793,.T.); +#107793 = EDGE_LOOP('',(#107794,#107800,#107801,#107802)); +#107794 = ORIENTED_EDGE('',*,*,#107795,.T.); +#107795 = EDGE_CURVE('',#105669,#105605,#107796,.T.); +#107796 = LINE('',#107797,#107798); +#107797 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#107798 = VECTOR('',#107799,1.); +#107799 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107800 = ORIENTED_EDGE('',*,*,#105604,.T.); +#107801 = ORIENTED_EDGE('',*,*,#105589,.F.); +#107802 = ORIENTED_EDGE('',*,*,#105668,.F.); +#107803 = PLANE('',#107804); +#107804 = AXIS2_PLACEMENT_3D('',#107805,#107806,#107807); +#107805 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#107806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107807 = DIRECTION('',(0.,0.,1.)); +#107808 = ADVANCED_FACE('',(#107809),#107820,.T.); +#107809 = FACE_BOUND('',#107810,.T.); +#107810 = EDGE_LOOP('',(#107811,#107817,#107818,#107819)); +#107811 = ORIENTED_EDGE('',*,*,#107812,.T.); +#107812 = EDGE_CURVE('',#105694,#105630,#107813,.T.); +#107813 = LINE('',#107814,#107815); +#107814 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#107815 = VECTOR('',#107816,1.); +#107816 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107817 = ORIENTED_EDGE('',*,*,#105637,.T.); +#107818 = ORIENTED_EDGE('',*,*,#107795,.F.); +#107819 = ORIENTED_EDGE('',*,*,#105701,.F.); +#107820 = PLANE('',#107821); +#107821 = AXIS2_PLACEMENT_3D('',#107822,#107823,#107824); +#107822 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#107823 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107824 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107825 = ADVANCED_FACE('',(#107826),#107837,.T.); +#107826 = FACE_BOUND('',#107827,.T.); +#107827 = EDGE_LOOP('',(#107828,#107834,#107835,#107836)); +#107828 = ORIENTED_EDGE('',*,*,#107829,.T.); +#107829 = EDGE_CURVE('',#105686,#105622,#107830,.T.); +#107830 = LINE('',#107831,#107832); +#107831 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#107832 = VECTOR('',#107833,1.); +#107833 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107834 = ORIENTED_EDGE('',*,*,#105629,.T.); +#107835 = ORIENTED_EDGE('',*,*,#107812,.F.); +#107836 = ORIENTED_EDGE('',*,*,#105693,.T.); +#107837 = PLANE('',#107838); +#107838 = AXIS2_PLACEMENT_3D('',#107839,#107840,#107841); +#107839 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#107840 = DIRECTION('',(0.,-0.,-1.)); +#107841 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107842 = ADVANCED_FACE('',(#107843),#107854,.T.); +#107843 = FACE_BOUND('',#107844,.T.); +#107844 = EDGE_LOOP('',(#107845,#107851,#107852,#107853)); +#107845 = ORIENTED_EDGE('',*,*,#107846,.T.); +#107846 = EDGE_CURVE('',#105678,#105614,#107847,.T.); +#107847 = LINE('',#107848,#107849); +#107848 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#107849 = VECTOR('',#107850,1.); +#107850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107851 = ORIENTED_EDGE('',*,*,#105621,.T.); +#107852 = ORIENTED_EDGE('',*,*,#107829,.F.); +#107853 = ORIENTED_EDGE('',*,*,#105685,.F.); +#107854 = PLANE('',#107855); +#107855 = AXIS2_PLACEMENT_3D('',#107856,#107857,#107858); +#107856 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#107857 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107858 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107859 = ADVANCED_FACE('',(#107860),#107866,.T.); +#107860 = FACE_BOUND('',#107861,.T.); +#107861 = EDGE_LOOP('',(#107862,#107863,#107864,#107865)); +#107862 = ORIENTED_EDGE('',*,*,#105651,.T.); +#107863 = ORIENTED_EDGE('',*,*,#105613,.T.); +#107864 = ORIENTED_EDGE('',*,*,#107846,.F.); +#107865 = ORIENTED_EDGE('',*,*,#105677,.F.); +#107866 = PLANE('',#107867); +#107867 = AXIS2_PLACEMENT_3D('',#107868,#107869,#107870); +#107868 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#107869 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107870 = DIRECTION('',(0.,0.,-1.)); +#107871 = ADVANCED_FACE('',(#107872),#107883,.T.); +#107872 = FACE_BOUND('',#107873,.T.); +#107873 = EDGE_LOOP('',(#107874,#107880,#107881,#107882)); +#107874 = ORIENTED_EDGE('',*,*,#107875,.T.); +#107875 = EDGE_CURVE('',#105797,#105733,#107876,.T.); +#107876 = LINE('',#107877,#107878); +#107877 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#107878 = VECTOR('',#107879,1.); +#107879 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107880 = ORIENTED_EDGE('',*,*,#105732,.T.); +#107881 = ORIENTED_EDGE('',*,*,#105717,.F.); +#107882 = ORIENTED_EDGE('',*,*,#105796,.F.); +#107883 = PLANE('',#107884); +#107884 = AXIS2_PLACEMENT_3D('',#107885,#107886,#107887); +#107885 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#107886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107887 = DIRECTION('',(0.,0.,1.)); +#107888 = ADVANCED_FACE('',(#107889),#107900,.T.); +#107889 = FACE_BOUND('',#107890,.T.); +#107890 = EDGE_LOOP('',(#107891,#107897,#107898,#107899)); +#107891 = ORIENTED_EDGE('',*,*,#107892,.T.); +#107892 = EDGE_CURVE('',#105822,#105758,#107893,.T.); +#107893 = LINE('',#107894,#107895); +#107894 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#107895 = VECTOR('',#107896,1.); +#107896 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107897 = ORIENTED_EDGE('',*,*,#105765,.T.); +#107898 = ORIENTED_EDGE('',*,*,#107875,.F.); +#107899 = ORIENTED_EDGE('',*,*,#105829,.F.); +#107900 = PLANE('',#107901); +#107901 = AXIS2_PLACEMENT_3D('',#107902,#107903,#107904); +#107902 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#107903 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107904 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107905 = ADVANCED_FACE('',(#107906),#107917,.T.); +#107906 = FACE_BOUND('',#107907,.T.); +#107907 = EDGE_LOOP('',(#107908,#107914,#107915,#107916)); +#107908 = ORIENTED_EDGE('',*,*,#107909,.T.); +#107909 = EDGE_CURVE('',#105814,#105750,#107910,.T.); +#107910 = LINE('',#107911,#107912); +#107911 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#107912 = VECTOR('',#107913,1.); +#107913 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107914 = ORIENTED_EDGE('',*,*,#105757,.T.); +#107915 = ORIENTED_EDGE('',*,*,#107892,.F.); +#107916 = ORIENTED_EDGE('',*,*,#105821,.T.); +#107917 = PLANE('',#107918); +#107918 = AXIS2_PLACEMENT_3D('',#107919,#107920,#107921); +#107919 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#107920 = DIRECTION('',(0.,-0.,-1.)); +#107921 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107922 = ADVANCED_FACE('',(#107923),#107934,.T.); +#107923 = FACE_BOUND('',#107924,.T.); +#107924 = EDGE_LOOP('',(#107925,#107931,#107932,#107933)); +#107925 = ORIENTED_EDGE('',*,*,#107926,.T.); +#107926 = EDGE_CURVE('',#105806,#105742,#107927,.T.); +#107927 = LINE('',#107928,#107929); +#107928 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#107929 = VECTOR('',#107930,1.); +#107930 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107931 = ORIENTED_EDGE('',*,*,#105749,.T.); +#107932 = ORIENTED_EDGE('',*,*,#107909,.F.); +#107933 = ORIENTED_EDGE('',*,*,#105813,.F.); +#107934 = PLANE('',#107935); +#107935 = AXIS2_PLACEMENT_3D('',#107936,#107937,#107938); +#107936 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#107937 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107938 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107939 = ADVANCED_FACE('',(#107940),#107946,.T.); +#107940 = FACE_BOUND('',#107941,.T.); +#107941 = EDGE_LOOP('',(#107942,#107943,#107944,#107945)); +#107942 = ORIENTED_EDGE('',*,*,#105779,.T.); +#107943 = ORIENTED_EDGE('',*,*,#105741,.T.); +#107944 = ORIENTED_EDGE('',*,*,#107926,.F.); +#107945 = ORIENTED_EDGE('',*,*,#105805,.F.); +#107946 = PLANE('',#107947); +#107947 = AXIS2_PLACEMENT_3D('',#107948,#107949,#107950); +#107948 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#107949 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107950 = DIRECTION('',(0.,0.,-1.)); +#107951 = ADVANCED_FACE('',(#107952),#107963,.T.); +#107952 = FACE_BOUND('',#107953,.T.); +#107953 = EDGE_LOOP('',(#107954,#107960,#107961,#107962)); +#107954 = ORIENTED_EDGE('',*,*,#107955,.T.); +#107955 = EDGE_CURVE('',#105925,#105861,#107956,.T.); +#107956 = LINE('',#107957,#107958); +#107957 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#107958 = VECTOR('',#107959,1.); +#107959 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107960 = ORIENTED_EDGE('',*,*,#105860,.T.); +#107961 = ORIENTED_EDGE('',*,*,#105845,.F.); +#107962 = ORIENTED_EDGE('',*,*,#105924,.F.); +#107963 = PLANE('',#107964); +#107964 = AXIS2_PLACEMENT_3D('',#107965,#107966,#107967); +#107965 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#107966 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107967 = DIRECTION('',(0.,0.,1.)); +#107968 = ADVANCED_FACE('',(#107969),#107980,.T.); +#107969 = FACE_BOUND('',#107970,.T.); +#107970 = EDGE_LOOP('',(#107971,#107977,#107978,#107979)); +#107971 = ORIENTED_EDGE('',*,*,#107972,.T.); +#107972 = EDGE_CURVE('',#105950,#105886,#107973,.T.); +#107973 = LINE('',#107974,#107975); +#107974 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#107975 = VECTOR('',#107976,1.); +#107976 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107977 = ORIENTED_EDGE('',*,*,#105893,.T.); +#107978 = ORIENTED_EDGE('',*,*,#107955,.F.); +#107979 = ORIENTED_EDGE('',*,*,#105957,.F.); +#107980 = PLANE('',#107981); +#107981 = AXIS2_PLACEMENT_3D('',#107982,#107983,#107984); +#107982 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#107983 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107984 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107985 = ADVANCED_FACE('',(#107986),#107997,.T.); +#107986 = FACE_BOUND('',#107987,.T.); +#107987 = EDGE_LOOP('',(#107988,#107994,#107995,#107996)); +#107988 = ORIENTED_EDGE('',*,*,#107989,.T.); +#107989 = EDGE_CURVE('',#105942,#105878,#107990,.T.); +#107990 = LINE('',#107991,#107992); +#107991 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#107992 = VECTOR('',#107993,1.); +#107993 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107994 = ORIENTED_EDGE('',*,*,#105885,.T.); +#107995 = ORIENTED_EDGE('',*,*,#107972,.F.); +#107996 = ORIENTED_EDGE('',*,*,#105949,.T.); +#107997 = PLANE('',#107998); +#107998 = AXIS2_PLACEMENT_3D('',#107999,#108000,#108001); +#107999 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#108000 = DIRECTION('',(0.,-0.,-1.)); +#108001 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108002 = ADVANCED_FACE('',(#108003),#108014,.T.); +#108003 = FACE_BOUND('',#108004,.T.); +#108004 = EDGE_LOOP('',(#108005,#108011,#108012,#108013)); +#108005 = ORIENTED_EDGE('',*,*,#108006,.T.); +#108006 = EDGE_CURVE('',#105934,#105870,#108007,.T.); +#108007 = LINE('',#108008,#108009); +#108008 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#108009 = VECTOR('',#108010,1.); +#108010 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108011 = ORIENTED_EDGE('',*,*,#105877,.T.); +#108012 = ORIENTED_EDGE('',*,*,#107989,.F.); +#108013 = ORIENTED_EDGE('',*,*,#105941,.F.); +#108014 = PLANE('',#108015); +#108015 = AXIS2_PLACEMENT_3D('',#108016,#108017,#108018); +#108016 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#108017 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108018 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108019 = ADVANCED_FACE('',(#108020),#108026,.T.); +#108020 = FACE_BOUND('',#108021,.T.); +#108021 = EDGE_LOOP('',(#108022,#108023,#108024,#108025)); +#108022 = ORIENTED_EDGE('',*,*,#105907,.T.); +#108023 = ORIENTED_EDGE('',*,*,#105869,.T.); +#108024 = ORIENTED_EDGE('',*,*,#108006,.F.); +#108025 = ORIENTED_EDGE('',*,*,#105933,.F.); +#108026 = PLANE('',#108027); +#108027 = AXIS2_PLACEMENT_3D('',#108028,#108029,#108030); +#108028 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#108029 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108030 = DIRECTION('',(0.,0.,-1.)); +#108031 = ADVANCED_FACE('',(#108032),#108043,.T.); +#108032 = FACE_BOUND('',#108033,.T.); +#108033 = EDGE_LOOP('',(#108034,#108040,#108041,#108042)); +#108034 = ORIENTED_EDGE('',*,*,#108035,.T.); +#108035 = EDGE_CURVE('',#106053,#105989,#108036,.T.); +#108036 = LINE('',#108037,#108038); +#108037 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#108038 = VECTOR('',#108039,1.); +#108039 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108040 = ORIENTED_EDGE('',*,*,#105988,.T.); +#108041 = ORIENTED_EDGE('',*,*,#105973,.F.); +#108042 = ORIENTED_EDGE('',*,*,#106052,.F.); +#108043 = PLANE('',#108044); +#108044 = AXIS2_PLACEMENT_3D('',#108045,#108046,#108047); +#108045 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#108046 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108047 = DIRECTION('',(0.,0.,1.)); +#108048 = ADVANCED_FACE('',(#108049),#108060,.T.); +#108049 = FACE_BOUND('',#108050,.T.); +#108050 = EDGE_LOOP('',(#108051,#108057,#108058,#108059)); +#108051 = ORIENTED_EDGE('',*,*,#108052,.T.); +#108052 = EDGE_CURVE('',#106078,#106014,#108053,.T.); +#108053 = LINE('',#108054,#108055); +#108054 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#108055 = VECTOR('',#108056,1.); +#108056 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108057 = ORIENTED_EDGE('',*,*,#106021,.T.); +#108058 = ORIENTED_EDGE('',*,*,#108035,.F.); +#108059 = ORIENTED_EDGE('',*,*,#106085,.F.); +#108060 = PLANE('',#108061); +#108061 = AXIS2_PLACEMENT_3D('',#108062,#108063,#108064); +#108062 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#108063 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#108064 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#108065 = ADVANCED_FACE('',(#108066),#108077,.T.); +#108066 = FACE_BOUND('',#108067,.T.); +#108067 = EDGE_LOOP('',(#108068,#108074,#108075,#108076)); +#108068 = ORIENTED_EDGE('',*,*,#108069,.T.); +#108069 = EDGE_CURVE('',#106070,#106006,#108070,.T.); +#108070 = LINE('',#108071,#108072); +#108071 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#108072 = VECTOR('',#108073,1.); +#108073 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108074 = ORIENTED_EDGE('',*,*,#106013,.T.); +#108075 = ORIENTED_EDGE('',*,*,#108052,.F.); +#108076 = ORIENTED_EDGE('',*,*,#106077,.T.); +#108077 = PLANE('',#108078); +#108078 = AXIS2_PLACEMENT_3D('',#108079,#108080,#108081); +#108079 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#108080 = DIRECTION('',(0.,-0.,-1.)); +#108081 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108082 = ADVANCED_FACE('',(#108083),#108094,.T.); +#108083 = FACE_BOUND('',#108084,.T.); +#108084 = EDGE_LOOP('',(#108085,#108091,#108092,#108093)); +#108085 = ORIENTED_EDGE('',*,*,#108086,.T.); +#108086 = EDGE_CURVE('',#106062,#105998,#108087,.T.); +#108087 = LINE('',#108088,#108089); +#108088 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#108089 = VECTOR('',#108090,1.); +#108090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108091 = ORIENTED_EDGE('',*,*,#106005,.T.); +#108092 = ORIENTED_EDGE('',*,*,#108069,.F.); +#108093 = ORIENTED_EDGE('',*,*,#106069,.F.); +#108094 = PLANE('',#108095); +#108095 = AXIS2_PLACEMENT_3D('',#108096,#108097,#108098); +#108096 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#108097 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108098 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108099 = ADVANCED_FACE('',(#108100),#108106,.T.); +#108100 = FACE_BOUND('',#108101,.T.); +#108101 = EDGE_LOOP('',(#108102,#108103,#108104,#108105)); +#108102 = ORIENTED_EDGE('',*,*,#106035,.T.); +#108103 = ORIENTED_EDGE('',*,*,#105997,.T.); +#108104 = ORIENTED_EDGE('',*,*,#108086,.F.); +#108105 = ORIENTED_EDGE('',*,*,#106061,.F.); +#108106 = PLANE('',#108107); +#108107 = AXIS2_PLACEMENT_3D('',#108108,#108109,#108110); +#108108 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#108109 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108110 = DIRECTION('',(0.,0.,-1.)); +#108111 = ADVANCED_FACE('',(#108112),#108123,.T.); +#108112 = FACE_BOUND('',#108113,.T.); +#108113 = EDGE_LOOP('',(#108114,#108120,#108121,#108122)); +#108114 = ORIENTED_EDGE('',*,*,#108115,.T.); +#108115 = EDGE_CURVE('',#106181,#106117,#108116,.T.); +#108116 = LINE('',#108117,#108118); +#108117 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#108118 = VECTOR('',#108119,1.); +#108119 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108120 = ORIENTED_EDGE('',*,*,#106116,.T.); +#108121 = ORIENTED_EDGE('',*,*,#106101,.F.); +#108122 = ORIENTED_EDGE('',*,*,#106180,.F.); +#108123 = PLANE('',#108124); +#108124 = AXIS2_PLACEMENT_3D('',#108125,#108126,#108127); +#108125 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#108126 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108127 = DIRECTION('',(0.,0.,1.)); +#108128 = ADVANCED_FACE('',(#108129),#108140,.T.); +#108129 = FACE_BOUND('',#108130,.T.); +#108130 = EDGE_LOOP('',(#108131,#108137,#108138,#108139)); +#108131 = ORIENTED_EDGE('',*,*,#108132,.T.); +#108132 = EDGE_CURVE('',#106206,#106142,#108133,.T.); +#108133 = LINE('',#108134,#108135); +#108134 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#108135 = VECTOR('',#108136,1.); +#108136 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108137 = ORIENTED_EDGE('',*,*,#106149,.T.); +#108138 = ORIENTED_EDGE('',*,*,#108115,.F.); +#108139 = ORIENTED_EDGE('',*,*,#106213,.F.); +#108140 = PLANE('',#108141); +#108141 = AXIS2_PLACEMENT_3D('',#108142,#108143,#108144); +#108142 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#108143 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#108144 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#108145 = ADVANCED_FACE('',(#108146),#108157,.T.); +#108146 = FACE_BOUND('',#108147,.T.); +#108147 = EDGE_LOOP('',(#108148,#108154,#108155,#108156)); +#108148 = ORIENTED_EDGE('',*,*,#108149,.T.); +#108149 = EDGE_CURVE('',#106198,#106134,#108150,.T.); +#108150 = LINE('',#108151,#108152); +#108151 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#108152 = VECTOR('',#108153,1.); +#108153 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108154 = ORIENTED_EDGE('',*,*,#106141,.T.); +#108155 = ORIENTED_EDGE('',*,*,#108132,.F.); +#108156 = ORIENTED_EDGE('',*,*,#106205,.T.); +#108157 = PLANE('',#108158); +#108158 = AXIS2_PLACEMENT_3D('',#108159,#108160,#108161); +#108159 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#108160 = DIRECTION('',(0.,-0.,-1.)); +#108161 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108162 = ADVANCED_FACE('',(#108163),#108174,.T.); +#108163 = FACE_BOUND('',#108164,.T.); +#108164 = EDGE_LOOP('',(#108165,#108171,#108172,#108173)); +#108165 = ORIENTED_EDGE('',*,*,#108166,.T.); +#108166 = EDGE_CURVE('',#106190,#106126,#108167,.T.); +#108167 = LINE('',#108168,#108169); +#108168 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#108169 = VECTOR('',#108170,1.); +#108170 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108171 = ORIENTED_EDGE('',*,*,#106133,.T.); +#108172 = ORIENTED_EDGE('',*,*,#108149,.F.); +#108173 = ORIENTED_EDGE('',*,*,#106197,.F.); +#108174 = PLANE('',#108175); +#108175 = AXIS2_PLACEMENT_3D('',#108176,#108177,#108178); +#108176 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#108177 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108178 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108179 = ADVANCED_FACE('',(#108180),#108186,.T.); +#108180 = FACE_BOUND('',#108181,.T.); +#108181 = EDGE_LOOP('',(#108182,#108183,#108184,#108185)); +#108182 = ORIENTED_EDGE('',*,*,#106163,.T.); +#108183 = ORIENTED_EDGE('',*,*,#106125,.T.); +#108184 = ORIENTED_EDGE('',*,*,#108166,.F.); +#108185 = ORIENTED_EDGE('',*,*,#106189,.F.); +#108186 = PLANE('',#108187); +#108187 = AXIS2_PLACEMENT_3D('',#108188,#108189,#108190); +#108188 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#108189 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108190 = DIRECTION('',(0.,0.,-1.)); +#108191 = ADVANCED_FACE('',(#108192),#108203,.T.); +#108192 = FACE_BOUND('',#108193,.T.); +#108193 = EDGE_LOOP('',(#108194,#108200,#108201,#108202)); +#108194 = ORIENTED_EDGE('',*,*,#108195,.T.); +#108195 = EDGE_CURVE('',#106309,#106245,#108196,.T.); +#108196 = LINE('',#108197,#108198); +#108197 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#108198 = VECTOR('',#108199,1.); +#108199 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108200 = ORIENTED_EDGE('',*,*,#106244,.T.); +#108201 = ORIENTED_EDGE('',*,*,#106229,.F.); +#108202 = ORIENTED_EDGE('',*,*,#106308,.F.); +#108203 = PLANE('',#108204); +#108204 = AXIS2_PLACEMENT_3D('',#108205,#108206,#108207); +#108205 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#108206 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108207 = DIRECTION('',(0.,0.,1.)); +#108208 = ADVANCED_FACE('',(#108209),#108220,.T.); +#108209 = FACE_BOUND('',#108210,.T.); +#108210 = EDGE_LOOP('',(#108211,#108217,#108218,#108219)); +#108211 = ORIENTED_EDGE('',*,*,#108212,.T.); +#108212 = EDGE_CURVE('',#106334,#106270,#108213,.T.); +#108213 = LINE('',#108214,#108215); +#108214 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#108215 = VECTOR('',#108216,1.); +#108216 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108217 = ORIENTED_EDGE('',*,*,#106277,.T.); +#108218 = ORIENTED_EDGE('',*,*,#108195,.F.); +#108219 = ORIENTED_EDGE('',*,*,#106341,.F.); +#108220 = PLANE('',#108221); +#108221 = AXIS2_PLACEMENT_3D('',#108222,#108223,#108224); +#108222 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#108223 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#108224 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#108225 = ADVANCED_FACE('',(#108226),#108237,.T.); +#108226 = FACE_BOUND('',#108227,.T.); +#108227 = EDGE_LOOP('',(#108228,#108234,#108235,#108236)); +#108228 = ORIENTED_EDGE('',*,*,#108229,.T.); +#108229 = EDGE_CURVE('',#106326,#106262,#108230,.T.); +#108230 = LINE('',#108231,#108232); +#108231 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#108232 = VECTOR('',#108233,1.); +#108233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108234 = ORIENTED_EDGE('',*,*,#106269,.T.); +#108235 = ORIENTED_EDGE('',*,*,#108212,.F.); +#108236 = ORIENTED_EDGE('',*,*,#106333,.T.); +#108237 = PLANE('',#108238); +#108238 = AXIS2_PLACEMENT_3D('',#108239,#108240,#108241); +#108239 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#108240 = DIRECTION('',(0.,-0.,-1.)); +#108241 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108242 = ADVANCED_FACE('',(#108243),#108254,.T.); +#108243 = FACE_BOUND('',#108244,.T.); +#108244 = EDGE_LOOP('',(#108245,#108251,#108252,#108253)); +#108245 = ORIENTED_EDGE('',*,*,#108246,.T.); +#108246 = EDGE_CURVE('',#106318,#106254,#108247,.T.); +#108247 = LINE('',#108248,#108249); +#108248 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#108249 = VECTOR('',#108250,1.); +#108250 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108251 = ORIENTED_EDGE('',*,*,#106261,.T.); +#108252 = ORIENTED_EDGE('',*,*,#108229,.F.); +#108253 = ORIENTED_EDGE('',*,*,#106325,.F.); +#108254 = PLANE('',#108255); +#108255 = AXIS2_PLACEMENT_3D('',#108256,#108257,#108258); +#108256 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#108257 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108258 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108259 = ADVANCED_FACE('',(#108260),#108266,.T.); +#108260 = FACE_BOUND('',#108261,.T.); +#108261 = EDGE_LOOP('',(#108262,#108263,#108264,#108265)); +#108262 = ORIENTED_EDGE('',*,*,#106291,.T.); +#108263 = ORIENTED_EDGE('',*,*,#106253,.T.); +#108264 = ORIENTED_EDGE('',*,*,#108246,.F.); +#108265 = ORIENTED_EDGE('',*,*,#106317,.F.); +#108266 = PLANE('',#108267); +#108267 = AXIS2_PLACEMENT_3D('',#108268,#108269,#108270); +#108268 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#108269 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108270 = DIRECTION('',(0.,0.,-1.)); +#108271 = ADVANCED_FACE('',(#108272),#108283,.T.); +#108272 = FACE_BOUND('',#108273,.T.); +#108273 = EDGE_LOOP('',(#108274,#108275,#108276,#108277)); +#108274 = ORIENTED_EDGE('',*,*,#106500,.T.); +#108275 = ORIENTED_EDGE('',*,*,#106363,.T.); +#108276 = ORIENTED_EDGE('',*,*,#106388,.T.); +#108277 = ORIENTED_EDGE('',*,*,#108278,.T.); +#108278 = EDGE_CURVE('',#106389,#106493,#108279,.T.); +#108279 = LINE('',#108280,#108281); +#108280 = CARTESIAN_POINT('',(0.1,-17.78,0.9)); +#108281 = VECTOR('',#108282,1.); +#108282 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108283 = PLANE('',#108284); +#108284 = AXIS2_PLACEMENT_3D('',#108285,#108286,#108287); +#108285 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#108286 = DIRECTION('',(0.,0.,1.)); +#108287 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108288 = ADVANCED_FACE('',(#108289),#108300,.T.); +#108289 = FACE_BOUND('',#108290,.T.); +#108290 = EDGE_LOOP('',(#108291,#108292,#108298,#108299)); +#108291 = ORIENTED_EDGE('',*,*,#106468,.T.); +#108292 = ORIENTED_EDGE('',*,*,#108293,.F.); +#108293 = EDGE_CURVE('',#106413,#106469,#108294,.T.); +#108294 = LINE('',#108295,#108296); +#108295 = CARTESIAN_POINT('',(-0.1,-17.78,0.9)); +#108296 = VECTOR('',#108297,1.); +#108297 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108298 = ORIENTED_EDGE('',*,*,#106420,.T.); +#108299 = ORIENTED_EDGE('',*,*,#106443,.T.); +#108300 = PLANE('',#108301); +#108301 = AXIS2_PLACEMENT_3D('',#108302,#108303,#108304); +#108302 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#108303 = DIRECTION('',(0.,0.,1.)); +#108304 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108305 = ADVANCED_FACE('',(#108306),#108349,.T.); +#108306 = FACE_BOUND('',#108307,.T.); +#108307 = EDGE_LOOP('',(#108308,#108309,#108317,#108325,#108333,#108341, + #108347,#108348)); +#108308 = ORIENTED_EDGE('',*,*,#106476,.F.); +#108309 = ORIENTED_EDGE('',*,*,#108310,.T.); +#108310 = EDGE_CURVE('',#106477,#108311,#108313,.T.); +#108311 = VERTEX_POINT('',#108312); +#108312 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#108313 = LINE('',#108314,#108315); +#108314 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#108315 = VECTOR('',#108316,1.); +#108316 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108317 = ORIENTED_EDGE('',*,*,#108318,.T.); +#108318 = EDGE_CURVE('',#108311,#108319,#108321,.T.); +#108319 = VERTEX_POINT('',#108320); +#108320 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#108321 = LINE('',#108322,#108323); +#108322 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#108323 = VECTOR('',#108324,1.); +#108324 = DIRECTION('',(0.,0.,-1.)); +#108325 = ORIENTED_EDGE('',*,*,#108326,.T.); +#108326 = EDGE_CURVE('',#108319,#108327,#108329,.T.); +#108327 = VERTEX_POINT('',#108328); +#108328 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#108329 = LINE('',#108330,#108331); +#108330 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#108331 = VECTOR('',#108332,1.); +#108332 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108333 = ORIENTED_EDGE('',*,*,#108334,.T.); +#108334 = EDGE_CURVE('',#108327,#108335,#108337,.T.); +#108335 = VERTEX_POINT('',#108336); +#108336 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108337 = LINE('',#108338,#108339); +#108338 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#108339 = VECTOR('',#108340,1.); +#108340 = DIRECTION('',(0.,0.,1.)); +#108341 = ORIENTED_EDGE('',*,*,#108342,.T.); +#108342 = EDGE_CURVE('',#108335,#106405,#108343,.T.); +#108343 = LINE('',#108344,#108345); +#108344 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108345 = VECTOR('',#108346,1.); +#108346 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108347 = ORIENTED_EDGE('',*,*,#106412,.F.); +#108348 = ORIENTED_EDGE('',*,*,#108293,.T.); +#108349 = PLANE('',#108350); +#108350 = AXIS2_PLACEMENT_3D('',#108351,#108352,#108353); +#108351 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#108352 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108353 = DIRECTION('',(0.,0.,1.)); +#108354 = ADVANCED_FACE('',(#108355),#108373,.T.); +#108355 = FACE_BOUND('',#108356,.T.); +#108356 = EDGE_LOOP('',(#108357,#108365,#108371,#108372)); +#108357 = ORIENTED_EDGE('',*,*,#108358,.T.); +#108358 = EDGE_CURVE('',#108335,#108359,#108361,.T.); +#108359 = VERTEX_POINT('',#108360); +#108360 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#108361 = LINE('',#108362,#108363); +#108362 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108363 = VECTOR('',#108364,1.); +#108364 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108365 = ORIENTED_EDGE('',*,*,#108366,.T.); +#108366 = EDGE_CURVE('',#108359,#106397,#108367,.T.); +#108367 = LINE('',#108368,#108369); +#108368 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#108369 = VECTOR('',#108370,1.); +#108370 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108371 = ORIENTED_EDGE('',*,*,#106404,.F.); +#108372 = ORIENTED_EDGE('',*,*,#108342,.F.); +#108373 = PLANE('',#108374); +#108374 = AXIS2_PLACEMENT_3D('',#108375,#108376,#108377); +#108375 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108376 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108377 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108378 = ADVANCED_FACE('',(#108379),#108415,.F.); +#108379 = FACE_BOUND('',#108380,.F.); +#108380 = EDGE_LOOP('',(#108381,#108382,#108390,#108398,#108406,#108412, + #108413,#108414)); +#108381 = ORIENTED_EDGE('',*,*,#106492,.F.); +#108382 = ORIENTED_EDGE('',*,*,#108383,.T.); +#108383 = EDGE_CURVE('',#106485,#108384,#108386,.T.); +#108384 = VERTEX_POINT('',#108385); +#108385 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#108386 = LINE('',#108387,#108388); +#108387 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#108388 = VECTOR('',#108389,1.); +#108389 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108390 = ORIENTED_EDGE('',*,*,#108391,.T.); +#108391 = EDGE_CURVE('',#108384,#108392,#108394,.T.); +#108392 = VERTEX_POINT('',#108393); +#108393 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#108394 = LINE('',#108395,#108396); +#108395 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#108396 = VECTOR('',#108397,1.); +#108397 = DIRECTION('',(0.,0.,-1.)); +#108398 = ORIENTED_EDGE('',*,*,#108399,.T.); +#108399 = EDGE_CURVE('',#108392,#108400,#108402,.T.); +#108400 = VERTEX_POINT('',#108401); +#108401 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#108402 = LINE('',#108403,#108404); +#108403 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#108404 = VECTOR('',#108405,1.); +#108405 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108406 = ORIENTED_EDGE('',*,*,#108407,.T.); +#108407 = EDGE_CURVE('',#108400,#108359,#108408,.T.); +#108408 = LINE('',#108409,#108410); +#108409 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#108410 = VECTOR('',#108411,1.); +#108411 = DIRECTION('',(0.,0.,1.)); +#108412 = ORIENTED_EDGE('',*,*,#108366,.T.); +#108413 = ORIENTED_EDGE('',*,*,#106396,.F.); +#108414 = ORIENTED_EDGE('',*,*,#108278,.T.); +#108415 = PLANE('',#108416); +#108416 = AXIS2_PLACEMENT_3D('',#108417,#108418,#108419); +#108417 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#108418 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108419 = DIRECTION('',(0.,0.,1.)); +#108420 = ADVANCED_FACE('',(#108421),#108432,.T.); +#108421 = FACE_BOUND('',#108422,.T.); +#108422 = EDGE_LOOP('',(#108423,#108424,#108425,#108431)); +#108423 = ORIENTED_EDGE('',*,*,#106484,.T.); +#108424 = ORIENTED_EDGE('',*,*,#108383,.T.); +#108425 = ORIENTED_EDGE('',*,*,#108426,.F.); +#108426 = EDGE_CURVE('',#108311,#108384,#108427,.T.); +#108427 = LINE('',#108428,#108429); +#108428 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#108429 = VECTOR('',#108430,1.); +#108430 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108431 = ORIENTED_EDGE('',*,*,#108310,.F.); +#108432 = PLANE('',#108433); +#108433 = AXIS2_PLACEMENT_3D('',#108434,#108435,#108436); +#108434 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#108435 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108436 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108437 = ADVANCED_FACE('',(#108438),#108449,.T.); +#108438 = FACE_BOUND('',#108439,.T.); +#108439 = EDGE_LOOP('',(#108440,#108441,#108442,#108443)); +#108440 = ORIENTED_EDGE('',*,*,#106660,.T.); +#108441 = ORIENTED_EDGE('',*,*,#106523,.T.); +#108442 = ORIENTED_EDGE('',*,*,#106548,.T.); +#108443 = ORIENTED_EDGE('',*,*,#108444,.T.); +#108444 = EDGE_CURVE('',#106549,#106653,#108445,.T.); +#108445 = LINE('',#108446,#108447); +#108446 = CARTESIAN_POINT('',(0.1,-15.24,0.9)); +#108447 = VECTOR('',#108448,1.); +#108448 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108449 = PLANE('',#108450); +#108450 = AXIS2_PLACEMENT_3D('',#108451,#108452,#108453); +#108451 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#108452 = DIRECTION('',(0.,0.,1.)); +#108453 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108454 = ADVANCED_FACE('',(#108455),#108466,.T.); +#108455 = FACE_BOUND('',#108456,.T.); +#108456 = EDGE_LOOP('',(#108457,#108458,#108464,#108465)); +#108457 = ORIENTED_EDGE('',*,*,#106628,.T.); +#108458 = ORIENTED_EDGE('',*,*,#108459,.F.); +#108459 = EDGE_CURVE('',#106573,#106629,#108460,.T.); +#108460 = LINE('',#108461,#108462); +#108461 = CARTESIAN_POINT('',(-0.1,-15.24,0.9)); +#108462 = VECTOR('',#108463,1.); +#108463 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108464 = ORIENTED_EDGE('',*,*,#106580,.T.); +#108465 = ORIENTED_EDGE('',*,*,#106603,.T.); +#108466 = PLANE('',#108467); +#108467 = AXIS2_PLACEMENT_3D('',#108468,#108469,#108470); +#108468 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#108469 = DIRECTION('',(0.,0.,1.)); +#108470 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108471 = ADVANCED_FACE('',(#108472),#108515,.T.); +#108472 = FACE_BOUND('',#108473,.T.); +#108473 = EDGE_LOOP('',(#108474,#108475,#108483,#108491,#108499,#108507, + #108513,#108514)); +#108474 = ORIENTED_EDGE('',*,*,#106636,.F.); +#108475 = ORIENTED_EDGE('',*,*,#108476,.T.); +#108476 = EDGE_CURVE('',#106637,#108477,#108479,.T.); +#108477 = VERTEX_POINT('',#108478); +#108478 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#108479 = LINE('',#108480,#108481); +#108480 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#108481 = VECTOR('',#108482,1.); +#108482 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108483 = ORIENTED_EDGE('',*,*,#108484,.T.); +#108484 = EDGE_CURVE('',#108477,#108485,#108487,.T.); +#108485 = VERTEX_POINT('',#108486); +#108486 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#108487 = LINE('',#108488,#108489); +#108488 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#108489 = VECTOR('',#108490,1.); +#108490 = DIRECTION('',(0.,0.,-1.)); +#108491 = ORIENTED_EDGE('',*,*,#108492,.T.); +#108492 = EDGE_CURVE('',#108485,#108493,#108495,.T.); +#108493 = VERTEX_POINT('',#108494); +#108494 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#108495 = LINE('',#108496,#108497); +#108496 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#108497 = VECTOR('',#108498,1.); +#108498 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108499 = ORIENTED_EDGE('',*,*,#108500,.T.); +#108500 = EDGE_CURVE('',#108493,#108501,#108503,.T.); +#108501 = VERTEX_POINT('',#108502); +#108502 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108503 = LINE('',#108504,#108505); +#108504 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#108505 = VECTOR('',#108506,1.); +#108506 = DIRECTION('',(0.,0.,1.)); +#108507 = ORIENTED_EDGE('',*,*,#108508,.T.); +#108508 = EDGE_CURVE('',#108501,#106565,#108509,.T.); +#108509 = LINE('',#108510,#108511); +#108510 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108511 = VECTOR('',#108512,1.); +#108512 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108513 = ORIENTED_EDGE('',*,*,#106572,.F.); +#108514 = ORIENTED_EDGE('',*,*,#108459,.T.); +#108515 = PLANE('',#108516); +#108516 = AXIS2_PLACEMENT_3D('',#108517,#108518,#108519); +#108517 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#108518 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108519 = DIRECTION('',(0.,0.,1.)); +#108520 = ADVANCED_FACE('',(#108521),#108539,.T.); +#108521 = FACE_BOUND('',#108522,.T.); +#108522 = EDGE_LOOP('',(#108523,#108531,#108537,#108538)); +#108523 = ORIENTED_EDGE('',*,*,#108524,.T.); +#108524 = EDGE_CURVE('',#108501,#108525,#108527,.T.); +#108525 = VERTEX_POINT('',#108526); +#108526 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#108527 = LINE('',#108528,#108529); +#108528 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108529 = VECTOR('',#108530,1.); +#108530 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108531 = ORIENTED_EDGE('',*,*,#108532,.T.); +#108532 = EDGE_CURVE('',#108525,#106557,#108533,.T.); +#108533 = LINE('',#108534,#108535); +#108534 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#108535 = VECTOR('',#108536,1.); +#108536 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108537 = ORIENTED_EDGE('',*,*,#106564,.F.); +#108538 = ORIENTED_EDGE('',*,*,#108508,.F.); +#108539 = PLANE('',#108540); +#108540 = AXIS2_PLACEMENT_3D('',#108541,#108542,#108543); +#108541 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108542 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108543 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108544 = ADVANCED_FACE('',(#108545),#108581,.F.); +#108545 = FACE_BOUND('',#108546,.F.); +#108546 = EDGE_LOOP('',(#108547,#108548,#108556,#108564,#108572,#108578, + #108579,#108580)); +#108547 = ORIENTED_EDGE('',*,*,#106652,.F.); +#108548 = ORIENTED_EDGE('',*,*,#108549,.T.); +#108549 = EDGE_CURVE('',#106645,#108550,#108552,.T.); +#108550 = VERTEX_POINT('',#108551); +#108551 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#108552 = LINE('',#108553,#108554); +#108553 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#108554 = VECTOR('',#108555,1.); +#108555 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108556 = ORIENTED_EDGE('',*,*,#108557,.T.); +#108557 = EDGE_CURVE('',#108550,#108558,#108560,.T.); +#108558 = VERTEX_POINT('',#108559); +#108559 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#108560 = LINE('',#108561,#108562); +#108561 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#108562 = VECTOR('',#108563,1.); +#108563 = DIRECTION('',(0.,0.,-1.)); +#108564 = ORIENTED_EDGE('',*,*,#108565,.T.); +#108565 = EDGE_CURVE('',#108558,#108566,#108568,.T.); +#108566 = VERTEX_POINT('',#108567); +#108567 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#108568 = LINE('',#108569,#108570); +#108569 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#108570 = VECTOR('',#108571,1.); +#108571 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108572 = ORIENTED_EDGE('',*,*,#108573,.T.); +#108573 = EDGE_CURVE('',#108566,#108525,#108574,.T.); +#108574 = LINE('',#108575,#108576); +#108575 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#108576 = VECTOR('',#108577,1.); +#108577 = DIRECTION('',(0.,0.,1.)); +#108578 = ORIENTED_EDGE('',*,*,#108532,.T.); +#108579 = ORIENTED_EDGE('',*,*,#106556,.F.); +#108580 = ORIENTED_EDGE('',*,*,#108444,.T.); +#108581 = PLANE('',#108582); +#108582 = AXIS2_PLACEMENT_3D('',#108583,#108584,#108585); +#108583 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#108584 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108585 = DIRECTION('',(0.,0.,1.)); +#108586 = ADVANCED_FACE('',(#108587),#108598,.T.); +#108587 = FACE_BOUND('',#108588,.T.); +#108588 = EDGE_LOOP('',(#108589,#108590,#108591,#108597)); +#108589 = ORIENTED_EDGE('',*,*,#106644,.T.); +#108590 = ORIENTED_EDGE('',*,*,#108549,.T.); +#108591 = ORIENTED_EDGE('',*,*,#108592,.F.); +#108592 = EDGE_CURVE('',#108477,#108550,#108593,.T.); +#108593 = LINE('',#108594,#108595); +#108594 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#108595 = VECTOR('',#108596,1.); +#108596 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108597 = ORIENTED_EDGE('',*,*,#108476,.F.); +#108598 = PLANE('',#108599); +#108599 = AXIS2_PLACEMENT_3D('',#108600,#108601,#108602); +#108600 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#108601 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108602 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108603 = ADVANCED_FACE('',(#108604),#108615,.T.); +#108604 = FACE_BOUND('',#108605,.T.); +#108605 = EDGE_LOOP('',(#108606,#108607,#108608,#108609)); +#108606 = ORIENTED_EDGE('',*,*,#106820,.T.); +#108607 = ORIENTED_EDGE('',*,*,#106683,.T.); +#108608 = ORIENTED_EDGE('',*,*,#106708,.T.); +#108609 = ORIENTED_EDGE('',*,*,#108610,.T.); +#108610 = EDGE_CURVE('',#106709,#106813,#108611,.T.); +#108611 = LINE('',#108612,#108613); +#108612 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#108613 = VECTOR('',#108614,1.); +#108614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108615 = PLANE('',#108616); +#108616 = AXIS2_PLACEMENT_3D('',#108617,#108618,#108619); +#108617 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#108618 = DIRECTION('',(0.,0.,1.)); +#108619 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108620 = ADVANCED_FACE('',(#108621),#108632,.T.); +#108621 = FACE_BOUND('',#108622,.T.); +#108622 = EDGE_LOOP('',(#108623,#108624,#108630,#108631)); +#108623 = ORIENTED_EDGE('',*,*,#106788,.T.); +#108624 = ORIENTED_EDGE('',*,*,#108625,.F.); +#108625 = EDGE_CURVE('',#106733,#106789,#108626,.T.); +#108626 = LINE('',#108627,#108628); +#108627 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#108628 = VECTOR('',#108629,1.); +#108629 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108630 = ORIENTED_EDGE('',*,*,#106740,.T.); +#108631 = ORIENTED_EDGE('',*,*,#106763,.T.); +#108632 = PLANE('',#108633); +#108633 = AXIS2_PLACEMENT_3D('',#108634,#108635,#108636); +#108634 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#108635 = DIRECTION('',(0.,0.,1.)); +#108636 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108637 = ADVANCED_FACE('',(#108638),#108681,.T.); +#108638 = FACE_BOUND('',#108639,.T.); +#108639 = EDGE_LOOP('',(#108640,#108641,#108649,#108657,#108665,#108673, + #108679,#108680)); +#108640 = ORIENTED_EDGE('',*,*,#106796,.F.); +#108641 = ORIENTED_EDGE('',*,*,#108642,.T.); +#108642 = EDGE_CURVE('',#106797,#108643,#108645,.T.); +#108643 = VERTEX_POINT('',#108644); +#108644 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#108645 = LINE('',#108646,#108647); +#108646 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#108647 = VECTOR('',#108648,1.); +#108648 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108649 = ORIENTED_EDGE('',*,*,#108650,.T.); +#108650 = EDGE_CURVE('',#108643,#108651,#108653,.T.); +#108651 = VERTEX_POINT('',#108652); +#108652 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#108653 = LINE('',#108654,#108655); +#108654 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#108655 = VECTOR('',#108656,1.); +#108656 = DIRECTION('',(0.,0.,-1.)); +#108657 = ORIENTED_EDGE('',*,*,#108658,.T.); +#108658 = EDGE_CURVE('',#108651,#108659,#108661,.T.); +#108659 = VERTEX_POINT('',#108660); +#108660 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#108661 = LINE('',#108662,#108663); +#108662 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#108663 = VECTOR('',#108664,1.); +#108664 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108665 = ORIENTED_EDGE('',*,*,#108666,.T.); +#108666 = EDGE_CURVE('',#108659,#108667,#108669,.T.); +#108667 = VERTEX_POINT('',#108668); +#108668 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108669 = LINE('',#108670,#108671); +#108670 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#108671 = VECTOR('',#108672,1.); +#108672 = DIRECTION('',(0.,0.,1.)); +#108673 = ORIENTED_EDGE('',*,*,#108674,.T.); +#108674 = EDGE_CURVE('',#108667,#106725,#108675,.T.); +#108675 = LINE('',#108676,#108677); +#108676 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108677 = VECTOR('',#108678,1.); +#108678 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108679 = ORIENTED_EDGE('',*,*,#106732,.F.); +#108680 = ORIENTED_EDGE('',*,*,#108625,.T.); +#108681 = PLANE('',#108682); +#108682 = AXIS2_PLACEMENT_3D('',#108683,#108684,#108685); +#108683 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#108684 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108685 = DIRECTION('',(0.,0.,1.)); +#108686 = ADVANCED_FACE('',(#108687),#108705,.T.); +#108687 = FACE_BOUND('',#108688,.T.); +#108688 = EDGE_LOOP('',(#108689,#108697,#108703,#108704)); +#108689 = ORIENTED_EDGE('',*,*,#108690,.T.); +#108690 = EDGE_CURVE('',#108667,#108691,#108693,.T.); +#108691 = VERTEX_POINT('',#108692); +#108692 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#108693 = LINE('',#108694,#108695); +#108694 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108695 = VECTOR('',#108696,1.); +#108696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108697 = ORIENTED_EDGE('',*,*,#108698,.T.); +#108698 = EDGE_CURVE('',#108691,#106717,#108699,.T.); +#108699 = LINE('',#108700,#108701); +#108700 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#108701 = VECTOR('',#108702,1.); +#108702 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108703 = ORIENTED_EDGE('',*,*,#106724,.F.); +#108704 = ORIENTED_EDGE('',*,*,#108674,.F.); +#108705 = PLANE('',#108706); +#108706 = AXIS2_PLACEMENT_3D('',#108707,#108708,#108709); +#108707 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108708 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108709 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108710 = ADVANCED_FACE('',(#108711),#108747,.F.); +#108711 = FACE_BOUND('',#108712,.F.); +#108712 = EDGE_LOOP('',(#108713,#108714,#108722,#108730,#108738,#108744, + #108745,#108746)); +#108713 = ORIENTED_EDGE('',*,*,#106812,.F.); +#108714 = ORIENTED_EDGE('',*,*,#108715,.T.); +#108715 = EDGE_CURVE('',#106805,#108716,#108718,.T.); +#108716 = VERTEX_POINT('',#108717); +#108717 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#108718 = LINE('',#108719,#108720); +#108719 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#108720 = VECTOR('',#108721,1.); +#108721 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108722 = ORIENTED_EDGE('',*,*,#108723,.T.); +#108723 = EDGE_CURVE('',#108716,#108724,#108726,.T.); +#108724 = VERTEX_POINT('',#108725); +#108725 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#108726 = LINE('',#108727,#108728); +#108727 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#108728 = VECTOR('',#108729,1.); +#108729 = DIRECTION('',(0.,0.,-1.)); +#108730 = ORIENTED_EDGE('',*,*,#108731,.T.); +#108731 = EDGE_CURVE('',#108724,#108732,#108734,.T.); +#108732 = VERTEX_POINT('',#108733); +#108733 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#108734 = LINE('',#108735,#108736); +#108735 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#108736 = VECTOR('',#108737,1.); +#108737 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108738 = ORIENTED_EDGE('',*,*,#108739,.T.); +#108739 = EDGE_CURVE('',#108732,#108691,#108740,.T.); +#108740 = LINE('',#108741,#108742); +#108741 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#108742 = VECTOR('',#108743,1.); +#108743 = DIRECTION('',(0.,0.,1.)); +#108744 = ORIENTED_EDGE('',*,*,#108698,.T.); +#108745 = ORIENTED_EDGE('',*,*,#106716,.F.); +#108746 = ORIENTED_EDGE('',*,*,#108610,.T.); +#108747 = PLANE('',#108748); +#108748 = AXIS2_PLACEMENT_3D('',#108749,#108750,#108751); +#108749 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#108750 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108751 = DIRECTION('',(0.,0.,1.)); +#108752 = ADVANCED_FACE('',(#108753),#108764,.T.); +#108753 = FACE_BOUND('',#108754,.T.); +#108754 = EDGE_LOOP('',(#108755,#108756,#108757,#108763)); +#108755 = ORIENTED_EDGE('',*,*,#106804,.T.); +#108756 = ORIENTED_EDGE('',*,*,#108715,.T.); +#108757 = ORIENTED_EDGE('',*,*,#108758,.F.); +#108758 = EDGE_CURVE('',#108643,#108716,#108759,.T.); +#108759 = LINE('',#108760,#108761); +#108760 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#108761 = VECTOR('',#108762,1.); +#108762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108763 = ORIENTED_EDGE('',*,*,#108642,.F.); +#108764 = PLANE('',#108765); +#108765 = AXIS2_PLACEMENT_3D('',#108766,#108767,#108768); +#108766 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#108767 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108768 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108769 = ADVANCED_FACE('',(#108770),#108781,.T.); +#108770 = FACE_BOUND('',#108771,.T.); +#108771 = EDGE_LOOP('',(#108772,#108773,#108774,#108775)); +#108772 = ORIENTED_EDGE('',*,*,#106980,.T.); +#108773 = ORIENTED_EDGE('',*,*,#106843,.T.); +#108774 = ORIENTED_EDGE('',*,*,#106868,.T.); +#108775 = ORIENTED_EDGE('',*,*,#108776,.T.); +#108776 = EDGE_CURVE('',#106869,#106973,#108777,.T.); +#108777 = LINE('',#108778,#108779); +#108778 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#108779 = VECTOR('',#108780,1.); +#108780 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108781 = PLANE('',#108782); +#108782 = AXIS2_PLACEMENT_3D('',#108783,#108784,#108785); +#108783 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#108784 = DIRECTION('',(0.,0.,1.)); +#108785 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108786 = ADVANCED_FACE('',(#108787),#108798,.T.); +#108787 = FACE_BOUND('',#108788,.T.); +#108788 = EDGE_LOOP('',(#108789,#108790,#108796,#108797)); +#108789 = ORIENTED_EDGE('',*,*,#106948,.T.); +#108790 = ORIENTED_EDGE('',*,*,#108791,.F.); +#108791 = EDGE_CURVE('',#106893,#106949,#108792,.T.); +#108792 = LINE('',#108793,#108794); +#108793 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#108794 = VECTOR('',#108795,1.); +#108795 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108796 = ORIENTED_EDGE('',*,*,#106900,.T.); +#108797 = ORIENTED_EDGE('',*,*,#106923,.T.); +#108798 = PLANE('',#108799); +#108799 = AXIS2_PLACEMENT_3D('',#108800,#108801,#108802); +#108800 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#108801 = DIRECTION('',(0.,0.,1.)); +#108802 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108803 = ADVANCED_FACE('',(#108804),#108847,.T.); +#108804 = FACE_BOUND('',#108805,.T.); +#108805 = EDGE_LOOP('',(#108806,#108807,#108815,#108823,#108831,#108839, + #108845,#108846)); +#108806 = ORIENTED_EDGE('',*,*,#106956,.F.); +#108807 = ORIENTED_EDGE('',*,*,#108808,.T.); +#108808 = EDGE_CURVE('',#106957,#108809,#108811,.T.); +#108809 = VERTEX_POINT('',#108810); +#108810 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#108811 = LINE('',#108812,#108813); +#108812 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#108813 = VECTOR('',#108814,1.); +#108814 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108815 = ORIENTED_EDGE('',*,*,#108816,.T.); +#108816 = EDGE_CURVE('',#108809,#108817,#108819,.T.); +#108817 = VERTEX_POINT('',#108818); +#108818 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#108819 = LINE('',#108820,#108821); +#108820 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#108821 = VECTOR('',#108822,1.); +#108822 = DIRECTION('',(0.,0.,-1.)); +#108823 = ORIENTED_EDGE('',*,*,#108824,.T.); +#108824 = EDGE_CURVE('',#108817,#108825,#108827,.T.); +#108825 = VERTEX_POINT('',#108826); +#108826 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#108827 = LINE('',#108828,#108829); +#108828 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#108829 = VECTOR('',#108830,1.); +#108830 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108831 = ORIENTED_EDGE('',*,*,#108832,.T.); +#108832 = EDGE_CURVE('',#108825,#108833,#108835,.T.); +#108833 = VERTEX_POINT('',#108834); +#108834 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108835 = LINE('',#108836,#108837); +#108836 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#108837 = VECTOR('',#108838,1.); +#108838 = DIRECTION('',(0.,0.,1.)); +#108839 = ORIENTED_EDGE('',*,*,#108840,.T.); +#108840 = EDGE_CURVE('',#108833,#106885,#108841,.T.); +#108841 = LINE('',#108842,#108843); +#108842 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108843 = VECTOR('',#108844,1.); +#108844 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108845 = ORIENTED_EDGE('',*,*,#106892,.F.); +#108846 = ORIENTED_EDGE('',*,*,#108791,.T.); +#108847 = PLANE('',#108848); +#108848 = AXIS2_PLACEMENT_3D('',#108849,#108850,#108851); +#108849 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#108850 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108851 = DIRECTION('',(0.,0.,1.)); +#108852 = ADVANCED_FACE('',(#108853),#108871,.T.); +#108853 = FACE_BOUND('',#108854,.T.); +#108854 = EDGE_LOOP('',(#108855,#108863,#108869,#108870)); +#108855 = ORIENTED_EDGE('',*,*,#108856,.T.); +#108856 = EDGE_CURVE('',#108833,#108857,#108859,.T.); +#108857 = VERTEX_POINT('',#108858); +#108858 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#108859 = LINE('',#108860,#108861); +#108860 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108861 = VECTOR('',#108862,1.); +#108862 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108863 = ORIENTED_EDGE('',*,*,#108864,.T.); +#108864 = EDGE_CURVE('',#108857,#106877,#108865,.T.); +#108865 = LINE('',#108866,#108867); +#108866 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#108867 = VECTOR('',#108868,1.); +#108868 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108869 = ORIENTED_EDGE('',*,*,#106884,.F.); +#108870 = ORIENTED_EDGE('',*,*,#108840,.F.); +#108871 = PLANE('',#108872); +#108872 = AXIS2_PLACEMENT_3D('',#108873,#108874,#108875); +#108873 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108874 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108875 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108876 = ADVANCED_FACE('',(#108877),#108913,.F.); +#108877 = FACE_BOUND('',#108878,.F.); +#108878 = EDGE_LOOP('',(#108879,#108880,#108888,#108896,#108904,#108910, + #108911,#108912)); +#108879 = ORIENTED_EDGE('',*,*,#106972,.F.); +#108880 = ORIENTED_EDGE('',*,*,#108881,.T.); +#108881 = EDGE_CURVE('',#106965,#108882,#108884,.T.); +#108882 = VERTEX_POINT('',#108883); +#108883 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#108884 = LINE('',#108885,#108886); +#108885 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#108886 = VECTOR('',#108887,1.); +#108887 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108888 = ORIENTED_EDGE('',*,*,#108889,.T.); +#108889 = EDGE_CURVE('',#108882,#108890,#108892,.T.); +#108890 = VERTEX_POINT('',#108891); +#108891 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#108892 = LINE('',#108893,#108894); +#108893 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#108894 = VECTOR('',#108895,1.); +#108895 = DIRECTION('',(0.,0.,-1.)); +#108896 = ORIENTED_EDGE('',*,*,#108897,.T.); +#108897 = EDGE_CURVE('',#108890,#108898,#108900,.T.); +#108898 = VERTEX_POINT('',#108899); +#108899 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#108900 = LINE('',#108901,#108902); +#108901 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#108902 = VECTOR('',#108903,1.); +#108903 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108904 = ORIENTED_EDGE('',*,*,#108905,.T.); +#108905 = EDGE_CURVE('',#108898,#108857,#108906,.T.); +#108906 = LINE('',#108907,#108908); +#108907 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#108908 = VECTOR('',#108909,1.); +#108909 = DIRECTION('',(0.,0.,1.)); +#108910 = ORIENTED_EDGE('',*,*,#108864,.T.); +#108911 = ORIENTED_EDGE('',*,*,#106876,.F.); +#108912 = ORIENTED_EDGE('',*,*,#108776,.T.); +#108913 = PLANE('',#108914); +#108914 = AXIS2_PLACEMENT_3D('',#108915,#108916,#108917); +#108915 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#108916 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108917 = DIRECTION('',(0.,0.,1.)); +#108918 = ADVANCED_FACE('',(#108919),#108930,.T.); +#108919 = FACE_BOUND('',#108920,.T.); +#108920 = EDGE_LOOP('',(#108921,#108922,#108923,#108929)); +#108921 = ORIENTED_EDGE('',*,*,#106964,.T.); +#108922 = ORIENTED_EDGE('',*,*,#108881,.T.); +#108923 = ORIENTED_EDGE('',*,*,#108924,.F.); +#108924 = EDGE_CURVE('',#108809,#108882,#108925,.T.); +#108925 = LINE('',#108926,#108927); +#108926 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#108927 = VECTOR('',#108928,1.); +#108928 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108929 = ORIENTED_EDGE('',*,*,#108808,.F.); +#108930 = PLANE('',#108931); +#108931 = AXIS2_PLACEMENT_3D('',#108932,#108933,#108934); +#108932 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#108933 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108934 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108935 = ADVANCED_FACE('',(#108936),#108947,.T.); +#108936 = FACE_BOUND('',#108937,.T.); +#108937 = EDGE_LOOP('',(#108938,#108939,#108940,#108941)); +#108938 = ORIENTED_EDGE('',*,*,#107140,.T.); +#108939 = ORIENTED_EDGE('',*,*,#107003,.T.); +#108940 = ORIENTED_EDGE('',*,*,#107028,.T.); +#108941 = ORIENTED_EDGE('',*,*,#108942,.T.); +#108942 = EDGE_CURVE('',#107029,#107133,#108943,.T.); +#108943 = LINE('',#108944,#108945); +#108944 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#108945 = VECTOR('',#108946,1.); +#108946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108947 = PLANE('',#108948); +#108948 = AXIS2_PLACEMENT_3D('',#108949,#108950,#108951); +#108949 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#108950 = DIRECTION('',(0.,0.,1.)); +#108951 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108952 = ADVANCED_FACE('',(#108953),#108964,.T.); +#108953 = FACE_BOUND('',#108954,.T.); +#108954 = EDGE_LOOP('',(#108955,#108956,#108962,#108963)); +#108955 = ORIENTED_EDGE('',*,*,#107108,.T.); +#108956 = ORIENTED_EDGE('',*,*,#108957,.F.); +#108957 = EDGE_CURVE('',#107053,#107109,#108958,.T.); +#108958 = LINE('',#108959,#108960); +#108959 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#108960 = VECTOR('',#108961,1.); +#108961 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108962 = ORIENTED_EDGE('',*,*,#107060,.T.); +#108963 = ORIENTED_EDGE('',*,*,#107083,.T.); +#108964 = PLANE('',#108965); +#108965 = AXIS2_PLACEMENT_3D('',#108966,#108967,#108968); +#108966 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#108967 = DIRECTION('',(0.,0.,1.)); +#108968 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108969 = ADVANCED_FACE('',(#108970),#109013,.T.); +#108970 = FACE_BOUND('',#108971,.T.); +#108971 = EDGE_LOOP('',(#108972,#108973,#108981,#108989,#108997,#109005, + #109011,#109012)); +#108972 = ORIENTED_EDGE('',*,*,#107116,.F.); +#108973 = ORIENTED_EDGE('',*,*,#108974,.T.); +#108974 = EDGE_CURVE('',#107117,#108975,#108977,.T.); +#108975 = VERTEX_POINT('',#108976); +#108976 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#108977 = LINE('',#108978,#108979); +#108978 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#108979 = VECTOR('',#108980,1.); +#108980 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108981 = ORIENTED_EDGE('',*,*,#108982,.T.); +#108982 = EDGE_CURVE('',#108975,#108983,#108985,.T.); +#108983 = VERTEX_POINT('',#108984); +#108984 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#108985 = LINE('',#108986,#108987); +#108986 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#108987 = VECTOR('',#108988,1.); +#108988 = DIRECTION('',(0.,0.,-1.)); +#108989 = ORIENTED_EDGE('',*,*,#108990,.T.); +#108990 = EDGE_CURVE('',#108983,#108991,#108993,.T.); +#108991 = VERTEX_POINT('',#108992); +#108992 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#108993 = LINE('',#108994,#108995); +#108994 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#108995 = VECTOR('',#108996,1.); +#108996 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108997 = ORIENTED_EDGE('',*,*,#108998,.T.); +#108998 = EDGE_CURVE('',#108991,#108999,#109001,.T.); +#108999 = VERTEX_POINT('',#109000); +#109000 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109001 = LINE('',#109002,#109003); +#109002 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#109003 = VECTOR('',#109004,1.); +#109004 = DIRECTION('',(0.,0.,1.)); +#109005 = ORIENTED_EDGE('',*,*,#109006,.T.); +#109006 = EDGE_CURVE('',#108999,#107045,#109007,.T.); +#109007 = LINE('',#109008,#109009); +#109008 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109009 = VECTOR('',#109010,1.); +#109010 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109011 = ORIENTED_EDGE('',*,*,#107052,.F.); +#109012 = ORIENTED_EDGE('',*,*,#108957,.T.); +#109013 = PLANE('',#109014); +#109014 = AXIS2_PLACEMENT_3D('',#109015,#109016,#109017); +#109015 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#109016 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109017 = DIRECTION('',(0.,0.,1.)); +#109018 = ADVANCED_FACE('',(#109019),#109037,.T.); +#109019 = FACE_BOUND('',#109020,.T.); +#109020 = EDGE_LOOP('',(#109021,#109029,#109035,#109036)); +#109021 = ORIENTED_EDGE('',*,*,#109022,.T.); +#109022 = EDGE_CURVE('',#108999,#109023,#109025,.T.); +#109023 = VERTEX_POINT('',#109024); +#109024 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#109025 = LINE('',#109026,#109027); +#109026 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109027 = VECTOR('',#109028,1.); +#109028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109029 = ORIENTED_EDGE('',*,*,#109030,.T.); +#109030 = EDGE_CURVE('',#109023,#107037,#109031,.T.); +#109031 = LINE('',#109032,#109033); +#109032 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#109033 = VECTOR('',#109034,1.); +#109034 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109035 = ORIENTED_EDGE('',*,*,#107044,.F.); +#109036 = ORIENTED_EDGE('',*,*,#109006,.F.); +#109037 = PLANE('',#109038); +#109038 = AXIS2_PLACEMENT_3D('',#109039,#109040,#109041); +#109039 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109040 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109041 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109042 = ADVANCED_FACE('',(#109043),#109079,.F.); +#109043 = FACE_BOUND('',#109044,.F.); +#109044 = EDGE_LOOP('',(#109045,#109046,#109054,#109062,#109070,#109076, + #109077,#109078)); +#109045 = ORIENTED_EDGE('',*,*,#107132,.F.); +#109046 = ORIENTED_EDGE('',*,*,#109047,.T.); +#109047 = EDGE_CURVE('',#107125,#109048,#109050,.T.); +#109048 = VERTEX_POINT('',#109049); +#109049 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#109050 = LINE('',#109051,#109052); +#109051 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#109052 = VECTOR('',#109053,1.); +#109053 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109054 = ORIENTED_EDGE('',*,*,#109055,.T.); +#109055 = EDGE_CURVE('',#109048,#109056,#109058,.T.); +#109056 = VERTEX_POINT('',#109057); +#109057 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#109058 = LINE('',#109059,#109060); +#109059 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#109060 = VECTOR('',#109061,1.); +#109061 = DIRECTION('',(0.,0.,-1.)); +#109062 = ORIENTED_EDGE('',*,*,#109063,.T.); +#109063 = EDGE_CURVE('',#109056,#109064,#109066,.T.); +#109064 = VERTEX_POINT('',#109065); +#109065 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#109066 = LINE('',#109067,#109068); +#109067 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#109068 = VECTOR('',#109069,1.); +#109069 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109070 = ORIENTED_EDGE('',*,*,#109071,.T.); +#109071 = EDGE_CURVE('',#109064,#109023,#109072,.T.); +#109072 = LINE('',#109073,#109074); +#109073 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#109074 = VECTOR('',#109075,1.); +#109075 = DIRECTION('',(0.,0.,1.)); +#109076 = ORIENTED_EDGE('',*,*,#109030,.T.); +#109077 = ORIENTED_EDGE('',*,*,#107036,.F.); +#109078 = ORIENTED_EDGE('',*,*,#108942,.T.); +#109079 = PLANE('',#109080); +#109080 = AXIS2_PLACEMENT_3D('',#109081,#109082,#109083); +#109081 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#109082 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109083 = DIRECTION('',(0.,0.,1.)); +#109084 = ADVANCED_FACE('',(#109085),#109096,.T.); +#109085 = FACE_BOUND('',#109086,.T.); +#109086 = EDGE_LOOP('',(#109087,#109088,#109089,#109095)); +#109087 = ORIENTED_EDGE('',*,*,#107124,.T.); +#109088 = ORIENTED_EDGE('',*,*,#109047,.T.); +#109089 = ORIENTED_EDGE('',*,*,#109090,.F.); +#109090 = EDGE_CURVE('',#108975,#109048,#109091,.T.); +#109091 = LINE('',#109092,#109093); +#109092 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#109093 = VECTOR('',#109094,1.); +#109094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109095 = ORIENTED_EDGE('',*,*,#108974,.F.); +#109096 = PLANE('',#109097); +#109097 = AXIS2_PLACEMENT_3D('',#109098,#109099,#109100); +#109098 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#109099 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109100 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109101 = ADVANCED_FACE('',(#109102),#109113,.T.); +#109102 = FACE_BOUND('',#109103,.T.); +#109103 = EDGE_LOOP('',(#109104,#109105,#109106,#109107)); +#109104 = ORIENTED_EDGE('',*,*,#107300,.T.); +#109105 = ORIENTED_EDGE('',*,*,#107163,.T.); +#109106 = ORIENTED_EDGE('',*,*,#107188,.T.); +#109107 = ORIENTED_EDGE('',*,*,#109108,.T.); +#109108 = EDGE_CURVE('',#107189,#107293,#109109,.T.); +#109109 = LINE('',#109110,#109111); +#109110 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#109111 = VECTOR('',#109112,1.); +#109112 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109113 = PLANE('',#109114); +#109114 = AXIS2_PLACEMENT_3D('',#109115,#109116,#109117); +#109115 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#109116 = DIRECTION('',(0.,0.,1.)); +#109117 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109118 = ADVANCED_FACE('',(#109119),#109130,.T.); +#109119 = FACE_BOUND('',#109120,.T.); +#109120 = EDGE_LOOP('',(#109121,#109122,#109128,#109129)); +#109121 = ORIENTED_EDGE('',*,*,#107268,.T.); +#109122 = ORIENTED_EDGE('',*,*,#109123,.F.); +#109123 = EDGE_CURVE('',#107213,#107269,#109124,.T.); +#109124 = LINE('',#109125,#109126); +#109125 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#109126 = VECTOR('',#109127,1.); +#109127 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109128 = ORIENTED_EDGE('',*,*,#107220,.T.); +#109129 = ORIENTED_EDGE('',*,*,#107243,.T.); +#109130 = PLANE('',#109131); +#109131 = AXIS2_PLACEMENT_3D('',#109132,#109133,#109134); +#109132 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#109133 = DIRECTION('',(0.,0.,1.)); +#109134 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109135 = ADVANCED_FACE('',(#109136),#109179,.T.); +#109136 = FACE_BOUND('',#109137,.T.); +#109137 = EDGE_LOOP('',(#109138,#109139,#109147,#109155,#109163,#109171, + #109177,#109178)); +#109138 = ORIENTED_EDGE('',*,*,#107276,.F.); +#109139 = ORIENTED_EDGE('',*,*,#109140,.T.); +#109140 = EDGE_CURVE('',#107277,#109141,#109143,.T.); +#109141 = VERTEX_POINT('',#109142); +#109142 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109143 = LINE('',#109144,#109145); +#109144 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#109145 = VECTOR('',#109146,1.); +#109146 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109147 = ORIENTED_EDGE('',*,*,#109148,.T.); +#109148 = EDGE_CURVE('',#109141,#109149,#109151,.T.); +#109149 = VERTEX_POINT('',#109150); +#109150 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109151 = LINE('',#109152,#109153); +#109152 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109153 = VECTOR('',#109154,1.); +#109154 = DIRECTION('',(0.,0.,-1.)); +#109155 = ORIENTED_EDGE('',*,*,#109156,.T.); +#109156 = EDGE_CURVE('',#109149,#109157,#109159,.T.); +#109157 = VERTEX_POINT('',#109158); +#109158 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109159 = LINE('',#109160,#109161); +#109160 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109161 = VECTOR('',#109162,1.); +#109162 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109163 = ORIENTED_EDGE('',*,*,#109164,.T.); +#109164 = EDGE_CURVE('',#109157,#109165,#109167,.T.); +#109165 = VERTEX_POINT('',#109166); +#109166 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109167 = LINE('',#109168,#109169); +#109168 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109169 = VECTOR('',#109170,1.); +#109170 = DIRECTION('',(0.,0.,1.)); +#109171 = ORIENTED_EDGE('',*,*,#109172,.T.); +#109172 = EDGE_CURVE('',#109165,#107205,#109173,.T.); +#109173 = LINE('',#109174,#109175); +#109174 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109175 = VECTOR('',#109176,1.); +#109176 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109177 = ORIENTED_EDGE('',*,*,#107212,.F.); +#109178 = ORIENTED_EDGE('',*,*,#109123,.T.); +#109179 = PLANE('',#109180); +#109180 = AXIS2_PLACEMENT_3D('',#109181,#109182,#109183); +#109181 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#109182 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109183 = DIRECTION('',(0.,0.,1.)); +#109184 = ADVANCED_FACE('',(#109185),#109203,.T.); +#109185 = FACE_BOUND('',#109186,.T.); +#109186 = EDGE_LOOP('',(#109187,#109195,#109201,#109202)); +#109187 = ORIENTED_EDGE('',*,*,#109188,.T.); +#109188 = EDGE_CURVE('',#109165,#109189,#109191,.T.); +#109189 = VERTEX_POINT('',#109190); +#109190 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#109191 = LINE('',#109192,#109193); +#109192 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109193 = VECTOR('',#109194,1.); +#109194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109195 = ORIENTED_EDGE('',*,*,#109196,.T.); +#109196 = EDGE_CURVE('',#109189,#107197,#109197,.T.); +#109197 = LINE('',#109198,#109199); +#109198 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#109199 = VECTOR('',#109200,1.); +#109200 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109201 = ORIENTED_EDGE('',*,*,#107204,.F.); +#109202 = ORIENTED_EDGE('',*,*,#109172,.F.); +#109203 = PLANE('',#109204); +#109204 = AXIS2_PLACEMENT_3D('',#109205,#109206,#109207); +#109205 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109206 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109207 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109208 = ADVANCED_FACE('',(#109209),#109245,.F.); +#109209 = FACE_BOUND('',#109210,.F.); +#109210 = EDGE_LOOP('',(#109211,#109212,#109220,#109228,#109236,#109242, + #109243,#109244)); +#109211 = ORIENTED_EDGE('',*,*,#107292,.F.); +#109212 = ORIENTED_EDGE('',*,*,#109213,.T.); +#109213 = EDGE_CURVE('',#107285,#109214,#109216,.T.); +#109214 = VERTEX_POINT('',#109215); +#109215 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#109216 = LINE('',#109217,#109218); +#109217 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#109218 = VECTOR('',#109219,1.); +#109219 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109220 = ORIENTED_EDGE('',*,*,#109221,.T.); +#109221 = EDGE_CURVE('',#109214,#109222,#109224,.T.); +#109222 = VERTEX_POINT('',#109223); +#109223 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#109224 = LINE('',#109225,#109226); +#109225 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#109226 = VECTOR('',#109227,1.); +#109227 = DIRECTION('',(0.,0.,-1.)); +#109228 = ORIENTED_EDGE('',*,*,#109229,.T.); +#109229 = EDGE_CURVE('',#109222,#109230,#109232,.T.); +#109230 = VERTEX_POINT('',#109231); +#109231 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#109232 = LINE('',#109233,#109234); +#109233 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#109234 = VECTOR('',#109235,1.); +#109235 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109236 = ORIENTED_EDGE('',*,*,#109237,.T.); +#109237 = EDGE_CURVE('',#109230,#109189,#109238,.T.); +#109238 = LINE('',#109239,#109240); +#109239 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#109240 = VECTOR('',#109241,1.); +#109241 = DIRECTION('',(0.,0.,1.)); +#109242 = ORIENTED_EDGE('',*,*,#109196,.T.); +#109243 = ORIENTED_EDGE('',*,*,#107196,.F.); +#109244 = ORIENTED_EDGE('',*,*,#109108,.T.); +#109245 = PLANE('',#109246); +#109246 = AXIS2_PLACEMENT_3D('',#109247,#109248,#109249); +#109247 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#109248 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109249 = DIRECTION('',(0.,0.,1.)); +#109250 = ADVANCED_FACE('',(#109251),#109262,.T.); +#109251 = FACE_BOUND('',#109252,.T.); +#109252 = EDGE_LOOP('',(#109253,#109254,#109255,#109261)); +#109253 = ORIENTED_EDGE('',*,*,#107284,.T.); +#109254 = ORIENTED_EDGE('',*,*,#109213,.T.); +#109255 = ORIENTED_EDGE('',*,*,#109256,.F.); +#109256 = EDGE_CURVE('',#109141,#109214,#109257,.T.); +#109257 = LINE('',#109258,#109259); +#109258 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109259 = VECTOR('',#109260,1.); +#109260 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109261 = ORIENTED_EDGE('',*,*,#109140,.F.); +#109262 = PLANE('',#109263); +#109263 = AXIS2_PLACEMENT_3D('',#109264,#109265,#109266); +#109264 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#109265 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109266 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109267 = ADVANCED_FACE('',(#109268),#109279,.T.); +#109268 = FACE_BOUND('',#109269,.T.); +#109269 = EDGE_LOOP('',(#109270,#109271,#109272,#109273)); +#109270 = ORIENTED_EDGE('',*,*,#107460,.T.); +#109271 = ORIENTED_EDGE('',*,*,#107323,.T.); +#109272 = ORIENTED_EDGE('',*,*,#107348,.T.); +#109273 = ORIENTED_EDGE('',*,*,#109274,.T.); +#109274 = EDGE_CURVE('',#107349,#107453,#109275,.T.); +#109275 = LINE('',#109276,#109277); +#109276 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#109277 = VECTOR('',#109278,1.); +#109278 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109279 = PLANE('',#109280); +#109280 = AXIS2_PLACEMENT_3D('',#109281,#109282,#109283); +#109281 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#109282 = DIRECTION('',(0.,0.,1.)); +#109283 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109284 = ADVANCED_FACE('',(#109285),#109296,.T.); +#109285 = FACE_BOUND('',#109286,.T.); +#109286 = EDGE_LOOP('',(#109287,#109288,#109294,#109295)); +#109287 = ORIENTED_EDGE('',*,*,#107428,.T.); +#109288 = ORIENTED_EDGE('',*,*,#109289,.F.); +#109289 = EDGE_CURVE('',#107373,#107429,#109290,.T.); +#109290 = LINE('',#109291,#109292); +#109291 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#109292 = VECTOR('',#109293,1.); +#109293 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109294 = ORIENTED_EDGE('',*,*,#107380,.T.); +#109295 = ORIENTED_EDGE('',*,*,#107403,.T.); +#109296 = PLANE('',#109297); +#109297 = AXIS2_PLACEMENT_3D('',#109298,#109299,#109300); +#109298 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#109299 = DIRECTION('',(0.,0.,1.)); +#109300 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109301 = ADVANCED_FACE('',(#109302),#109345,.T.); +#109302 = FACE_BOUND('',#109303,.T.); +#109303 = EDGE_LOOP('',(#109304,#109305,#109313,#109321,#109329,#109337, + #109343,#109344)); +#109304 = ORIENTED_EDGE('',*,*,#107436,.F.); +#109305 = ORIENTED_EDGE('',*,*,#109306,.T.); +#109306 = EDGE_CURVE('',#107437,#109307,#109309,.T.); +#109307 = VERTEX_POINT('',#109308); +#109308 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109309 = LINE('',#109310,#109311); +#109310 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#109311 = VECTOR('',#109312,1.); +#109312 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109313 = ORIENTED_EDGE('',*,*,#109314,.T.); +#109314 = EDGE_CURVE('',#109307,#109315,#109317,.T.); +#109315 = VERTEX_POINT('',#109316); +#109316 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109317 = LINE('',#109318,#109319); +#109318 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109319 = VECTOR('',#109320,1.); +#109320 = DIRECTION('',(0.,0.,-1.)); +#109321 = ORIENTED_EDGE('',*,*,#109322,.T.); +#109322 = EDGE_CURVE('',#109315,#109323,#109325,.T.); +#109323 = VERTEX_POINT('',#109324); +#109324 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109325 = LINE('',#109326,#109327); +#109326 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109327 = VECTOR('',#109328,1.); +#109328 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109329 = ORIENTED_EDGE('',*,*,#109330,.T.); +#109330 = EDGE_CURVE('',#109323,#109331,#109333,.T.); +#109331 = VERTEX_POINT('',#109332); +#109332 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109333 = LINE('',#109334,#109335); +#109334 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109335 = VECTOR('',#109336,1.); +#109336 = DIRECTION('',(0.,0.,1.)); +#109337 = ORIENTED_EDGE('',*,*,#109338,.T.); +#109338 = EDGE_CURVE('',#109331,#107365,#109339,.T.); +#109339 = LINE('',#109340,#109341); +#109340 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109341 = VECTOR('',#109342,1.); +#109342 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109343 = ORIENTED_EDGE('',*,*,#107372,.F.); +#109344 = ORIENTED_EDGE('',*,*,#109289,.T.); +#109345 = PLANE('',#109346); +#109346 = AXIS2_PLACEMENT_3D('',#109347,#109348,#109349); +#109347 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#109348 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109349 = DIRECTION('',(0.,0.,1.)); +#109350 = ADVANCED_FACE('',(#109351),#109369,.T.); +#109351 = FACE_BOUND('',#109352,.T.); +#109352 = EDGE_LOOP('',(#109353,#109361,#109367,#109368)); +#109353 = ORIENTED_EDGE('',*,*,#109354,.T.); +#109354 = EDGE_CURVE('',#109331,#109355,#109357,.T.); +#109355 = VERTEX_POINT('',#109356); +#109356 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#109357 = LINE('',#109358,#109359); +#109358 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109359 = VECTOR('',#109360,1.); +#109360 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109361 = ORIENTED_EDGE('',*,*,#109362,.T.); +#109362 = EDGE_CURVE('',#109355,#107357,#109363,.T.); +#109363 = LINE('',#109364,#109365); +#109364 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#109365 = VECTOR('',#109366,1.); +#109366 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109367 = ORIENTED_EDGE('',*,*,#107364,.F.); +#109368 = ORIENTED_EDGE('',*,*,#109338,.F.); +#109369 = PLANE('',#109370); +#109370 = AXIS2_PLACEMENT_3D('',#109371,#109372,#109373); +#109371 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109372 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109373 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109374 = ADVANCED_FACE('',(#109375),#109411,.F.); +#109375 = FACE_BOUND('',#109376,.F.); +#109376 = EDGE_LOOP('',(#109377,#109378,#109386,#109394,#109402,#109408, + #109409,#109410)); +#109377 = ORIENTED_EDGE('',*,*,#107452,.F.); +#109378 = ORIENTED_EDGE('',*,*,#109379,.T.); +#109379 = EDGE_CURVE('',#107445,#109380,#109382,.T.); +#109380 = VERTEX_POINT('',#109381); +#109381 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#109382 = LINE('',#109383,#109384); +#109383 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#109384 = VECTOR('',#109385,1.); +#109385 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109386 = ORIENTED_EDGE('',*,*,#109387,.T.); +#109387 = EDGE_CURVE('',#109380,#109388,#109390,.T.); +#109388 = VERTEX_POINT('',#109389); +#109389 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#109390 = LINE('',#109391,#109392); +#109391 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#109392 = VECTOR('',#109393,1.); +#109393 = DIRECTION('',(0.,0.,-1.)); +#109394 = ORIENTED_EDGE('',*,*,#109395,.T.); +#109395 = EDGE_CURVE('',#109388,#109396,#109398,.T.); +#109396 = VERTEX_POINT('',#109397); +#109397 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#109398 = LINE('',#109399,#109400); +#109399 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#109400 = VECTOR('',#109401,1.); +#109401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109402 = ORIENTED_EDGE('',*,*,#109403,.T.); +#109403 = EDGE_CURVE('',#109396,#109355,#109404,.T.); +#109404 = LINE('',#109405,#109406); +#109405 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#109406 = VECTOR('',#109407,1.); +#109407 = DIRECTION('',(0.,0.,1.)); +#109408 = ORIENTED_EDGE('',*,*,#109362,.T.); +#109409 = ORIENTED_EDGE('',*,*,#107356,.F.); +#109410 = ORIENTED_EDGE('',*,*,#109274,.T.); +#109411 = PLANE('',#109412); +#109412 = AXIS2_PLACEMENT_3D('',#109413,#109414,#109415); +#109413 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#109414 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109415 = DIRECTION('',(0.,0.,1.)); +#109416 = ADVANCED_FACE('',(#109417),#109428,.T.); +#109417 = FACE_BOUND('',#109418,.T.); +#109418 = EDGE_LOOP('',(#109419,#109420,#109421,#109427)); +#109419 = ORIENTED_EDGE('',*,*,#107444,.T.); +#109420 = ORIENTED_EDGE('',*,*,#109379,.T.); +#109421 = ORIENTED_EDGE('',*,*,#109422,.F.); +#109422 = EDGE_CURVE('',#109307,#109380,#109423,.T.); +#109423 = LINE('',#109424,#109425); +#109424 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109425 = VECTOR('',#109426,1.); +#109426 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109427 = ORIENTED_EDGE('',*,*,#109306,.F.); +#109428 = PLANE('',#109429); +#109429 = AXIS2_PLACEMENT_3D('',#109430,#109431,#109432); +#109430 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#109431 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109432 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109433 = ADVANCED_FACE('',(#109434),#109445,.T.); +#109434 = FACE_BOUND('',#109435,.T.); +#109435 = EDGE_LOOP('',(#109436,#109437,#109438,#109439)); +#109436 = ORIENTED_EDGE('',*,*,#107620,.T.); +#109437 = ORIENTED_EDGE('',*,*,#107483,.T.); +#109438 = ORIENTED_EDGE('',*,*,#107508,.T.); +#109439 = ORIENTED_EDGE('',*,*,#109440,.T.); +#109440 = EDGE_CURVE('',#107509,#107613,#109441,.T.); +#109441 = LINE('',#109442,#109443); +#109442 = CARTESIAN_POINT('',(0.1,8.770761894539E-16,0.9)); +#109443 = VECTOR('',#109444,1.); +#109444 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109445 = PLANE('',#109446); +#109446 = AXIS2_PLACEMENT_3D('',#109447,#109448,#109449); +#109447 = CARTESIAN_POINT('',(-9.367506770275E-17,1.7763568394E-15,0.9) + ); +#109448 = DIRECTION('',(0.,0.,1.)); +#109449 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109450 = ADVANCED_FACE('',(#109451),#109462,.T.); +#109451 = FACE_BOUND('',#109452,.T.); +#109452 = EDGE_LOOP('',(#109453,#109454,#109460,#109461)); +#109453 = ORIENTED_EDGE('',*,*,#107588,.T.); +#109454 = ORIENTED_EDGE('',*,*,#109455,.F.); +#109455 = EDGE_CURVE('',#107533,#107589,#109456,.T.); +#109456 = LINE('',#109457,#109458); +#109457 = CARTESIAN_POINT('',(-0.1,8.992806499464E-16,0.9)); +#109458 = VECTOR('',#109459,1.); +#109459 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109460 = ORIENTED_EDGE('',*,*,#107540,.T.); +#109461 = ORIENTED_EDGE('',*,*,#107563,.T.); +#109462 = PLANE('',#109463); +#109463 = AXIS2_PLACEMENT_3D('',#109464,#109465,#109466); +#109464 = CARTESIAN_POINT('',(-9.367506770275E-17,1.7763568394E-15,0.9) + ); +#109465 = DIRECTION('',(0.,0.,1.)); +#109466 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109467 = ADVANCED_FACE('',(#109468),#109511,.T.); +#109468 = FACE_BOUND('',#109469,.T.); +#109469 = EDGE_LOOP('',(#109470,#109471,#109479,#109487,#109495,#109503, + #109509,#109510)); +#109470 = ORIENTED_EDGE('',*,*,#107596,.F.); +#109471 = ORIENTED_EDGE('',*,*,#109472,.T.); +#109472 = EDGE_CURVE('',#107597,#109473,#109475,.T.); +#109473 = VERTEX_POINT('',#109474); +#109474 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109475 = LINE('',#109476,#109477); +#109476 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#109477 = VECTOR('',#109478,1.); +#109478 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109479 = ORIENTED_EDGE('',*,*,#109480,.T.); +#109480 = EDGE_CURVE('',#109473,#109481,#109483,.T.); +#109481 = VERTEX_POINT('',#109482); +#109482 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109483 = LINE('',#109484,#109485); +#109484 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109485 = VECTOR('',#109486,1.); +#109486 = DIRECTION('',(0.,0.,-1.)); +#109487 = ORIENTED_EDGE('',*,*,#109488,.T.); +#109488 = EDGE_CURVE('',#109481,#109489,#109491,.T.); +#109489 = VERTEX_POINT('',#109490); +#109490 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109491 = LINE('',#109492,#109493); +#109492 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109493 = VECTOR('',#109494,1.); +#109494 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109495 = ORIENTED_EDGE('',*,*,#109496,.T.); +#109496 = EDGE_CURVE('',#109489,#109497,#109499,.T.); +#109497 = VERTEX_POINT('',#109498); +#109498 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109499 = LINE('',#109500,#109501); +#109500 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109501 = VECTOR('',#109502,1.); +#109502 = DIRECTION('',(0.,0.,1.)); +#109503 = ORIENTED_EDGE('',*,*,#109504,.T.); +#109504 = EDGE_CURVE('',#109497,#107525,#109505,.T.); +#109505 = LINE('',#109506,#109507); +#109506 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109507 = VECTOR('',#109508,1.); +#109508 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109509 = ORIENTED_EDGE('',*,*,#107532,.F.); +#109510 = ORIENTED_EDGE('',*,*,#109455,.T.); +#109511 = PLANE('',#109512); +#109512 = AXIS2_PLACEMENT_3D('',#109513,#109514,#109515); +#109513 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#109514 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109515 = DIRECTION('',(0.,0.,1.)); +#109516 = ADVANCED_FACE('',(#109517),#109535,.T.); +#109517 = FACE_BOUND('',#109518,.T.); +#109518 = EDGE_LOOP('',(#109519,#109527,#109533,#109534)); +#109519 = ORIENTED_EDGE('',*,*,#109520,.T.); +#109520 = EDGE_CURVE('',#109497,#109521,#109523,.T.); +#109521 = VERTEX_POINT('',#109522); +#109522 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#109523 = LINE('',#109524,#109525); +#109524 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109525 = VECTOR('',#109526,1.); +#109526 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109527 = ORIENTED_EDGE('',*,*,#109528,.T.); +#109528 = EDGE_CURVE('',#109521,#107517,#109529,.T.); +#109529 = LINE('',#109530,#109531); +#109530 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#109531 = VECTOR('',#109532,1.); +#109532 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109533 = ORIENTED_EDGE('',*,*,#107524,.F.); +#109534 = ORIENTED_EDGE('',*,*,#109504,.F.); +#109535 = PLANE('',#109536); +#109536 = AXIS2_PLACEMENT_3D('',#109537,#109538,#109539); +#109537 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109538 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109539 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109540 = ADVANCED_FACE('',(#109541),#109577,.F.); +#109541 = FACE_BOUND('',#109542,.F.); +#109542 = EDGE_LOOP('',(#109543,#109544,#109552,#109560,#109568,#109574, + #109575,#109576)); +#109543 = ORIENTED_EDGE('',*,*,#107612,.F.); +#109544 = ORIENTED_EDGE('',*,*,#109545,.T.); +#109545 = EDGE_CURVE('',#107605,#109546,#109548,.T.); +#109546 = VERTEX_POINT('',#109547); +#109547 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#109548 = LINE('',#109549,#109550); +#109549 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#109550 = VECTOR('',#109551,1.); +#109551 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109552 = ORIENTED_EDGE('',*,*,#109553,.T.); +#109553 = EDGE_CURVE('',#109546,#109554,#109556,.T.); +#109554 = VERTEX_POINT('',#109555); +#109555 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#109556 = LINE('',#109557,#109558); +#109557 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#109558 = VECTOR('',#109559,1.); +#109559 = DIRECTION('',(0.,0.,-1.)); +#109560 = ORIENTED_EDGE('',*,*,#109561,.T.); +#109561 = EDGE_CURVE('',#109554,#109562,#109564,.T.); +#109562 = VERTEX_POINT('',#109563); +#109563 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#109564 = LINE('',#109565,#109566); +#109565 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#109566 = VECTOR('',#109567,1.); +#109567 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109568 = ORIENTED_EDGE('',*,*,#109569,.T.); +#109569 = EDGE_CURVE('',#109562,#109521,#109570,.T.); +#109570 = LINE('',#109571,#109572); +#109571 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#109572 = VECTOR('',#109573,1.); +#109573 = DIRECTION('',(0.,0.,1.)); +#109574 = ORIENTED_EDGE('',*,*,#109528,.T.); +#109575 = ORIENTED_EDGE('',*,*,#107516,.F.); +#109576 = ORIENTED_EDGE('',*,*,#109440,.T.); +#109577 = PLANE('',#109578); +#109578 = AXIS2_PLACEMENT_3D('',#109579,#109580,#109581); +#109579 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#109580 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109581 = DIRECTION('',(0.,0.,1.)); +#109582 = ADVANCED_FACE('',(#109583),#109594,.T.); +#109583 = FACE_BOUND('',#109584,.T.); +#109584 = EDGE_LOOP('',(#109585,#109586,#109587,#109593)); +#109585 = ORIENTED_EDGE('',*,*,#107604,.T.); +#109586 = ORIENTED_EDGE('',*,*,#109545,.T.); +#109587 = ORIENTED_EDGE('',*,*,#109588,.F.); +#109588 = EDGE_CURVE('',#109473,#109546,#109589,.T.); +#109589 = LINE('',#109590,#109591); +#109590 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109591 = VECTOR('',#109592,1.); +#109592 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109593 = ORIENTED_EDGE('',*,*,#109472,.F.); +#109594 = PLANE('',#109595); +#109595 = AXIS2_PLACEMENT_3D('',#109596,#109597,#109598); +#109596 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#109597 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109598 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109599 = ADVANCED_FACE('',(#109600),#109611,.T.); +#109600 = FACE_BOUND('',#109601,.T.); +#109601 = EDGE_LOOP('',(#109602,#109608,#109609,#109610)); +#109602 = ORIENTED_EDGE('',*,*,#109603,.T.); +#109603 = EDGE_CURVE('',#108327,#108400,#109604,.T.); +#109604 = LINE('',#109605,#109606); +#109605 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#109606 = VECTOR('',#109607,1.); +#109607 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109608 = ORIENTED_EDGE('',*,*,#108407,.T.); +#109609 = ORIENTED_EDGE('',*,*,#108358,.F.); +#109610 = ORIENTED_EDGE('',*,*,#108334,.F.); +#109611 = PLANE('',#109612); +#109612 = AXIS2_PLACEMENT_3D('',#109613,#109614,#109615); +#109613 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#109614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109615 = DIRECTION('',(0.,0.,1.)); +#109616 = ADVANCED_FACE('',(#109617),#109628,.T.); +#109617 = FACE_BOUND('',#109618,.T.); +#109618 = EDGE_LOOP('',(#109619,#109625,#109626,#109627)); +#109619 = ORIENTED_EDGE('',*,*,#109620,.T.); +#109620 = EDGE_CURVE('',#108319,#108392,#109621,.T.); +#109621 = LINE('',#109622,#109623); +#109622 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#109623 = VECTOR('',#109624,1.); +#109624 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109625 = ORIENTED_EDGE('',*,*,#108399,.T.); +#109626 = ORIENTED_EDGE('',*,*,#109603,.F.); +#109627 = ORIENTED_EDGE('',*,*,#108326,.F.); +#109628 = PLANE('',#109629); +#109629 = AXIS2_PLACEMENT_3D('',#109630,#109631,#109632); +#109630 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#109631 = DIRECTION('',(0.,0.,1.)); +#109632 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109633 = ADVANCED_FACE('',(#109634),#109640,.T.); +#109634 = FACE_BOUND('',#109635,.T.); +#109635 = EDGE_LOOP('',(#109636,#109637,#109638,#109639)); +#109636 = ORIENTED_EDGE('',*,*,#108426,.T.); +#109637 = ORIENTED_EDGE('',*,*,#108391,.T.); +#109638 = ORIENTED_EDGE('',*,*,#109620,.F.); +#109639 = ORIENTED_EDGE('',*,*,#108318,.F.); +#109640 = PLANE('',#109641); +#109641 = AXIS2_PLACEMENT_3D('',#109642,#109643,#109644); +#109642 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#109643 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109644 = DIRECTION('',(0.,0.,-1.)); +#109645 = ADVANCED_FACE('',(#109646),#109657,.T.); +#109646 = FACE_BOUND('',#109647,.T.); +#109647 = EDGE_LOOP('',(#109648,#109654,#109655,#109656)); +#109648 = ORIENTED_EDGE('',*,*,#109649,.T.); +#109649 = EDGE_CURVE('',#108493,#108566,#109650,.T.); +#109650 = LINE('',#109651,#109652); +#109651 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#109652 = VECTOR('',#109653,1.); +#109653 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109654 = ORIENTED_EDGE('',*,*,#108573,.T.); +#109655 = ORIENTED_EDGE('',*,*,#108524,.F.); +#109656 = ORIENTED_EDGE('',*,*,#108500,.F.); +#109657 = PLANE('',#109658); +#109658 = AXIS2_PLACEMENT_3D('',#109659,#109660,#109661); +#109659 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#109660 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109661 = DIRECTION('',(0.,0.,1.)); +#109662 = ADVANCED_FACE('',(#109663),#109674,.T.); +#109663 = FACE_BOUND('',#109664,.T.); +#109664 = EDGE_LOOP('',(#109665,#109671,#109672,#109673)); +#109665 = ORIENTED_EDGE('',*,*,#109666,.T.); +#109666 = EDGE_CURVE('',#108485,#108558,#109667,.T.); +#109667 = LINE('',#109668,#109669); +#109668 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#109669 = VECTOR('',#109670,1.); +#109670 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109671 = ORIENTED_EDGE('',*,*,#108565,.T.); +#109672 = ORIENTED_EDGE('',*,*,#109649,.F.); +#109673 = ORIENTED_EDGE('',*,*,#108492,.F.); +#109674 = PLANE('',#109675); +#109675 = AXIS2_PLACEMENT_3D('',#109676,#109677,#109678); +#109676 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#109677 = DIRECTION('',(0.,0.,1.)); +#109678 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109679 = ADVANCED_FACE('',(#109680),#109686,.T.); +#109680 = FACE_BOUND('',#109681,.T.); +#109681 = EDGE_LOOP('',(#109682,#109683,#109684,#109685)); +#109682 = ORIENTED_EDGE('',*,*,#108592,.T.); +#109683 = ORIENTED_EDGE('',*,*,#108557,.T.); +#109684 = ORIENTED_EDGE('',*,*,#109666,.F.); +#109685 = ORIENTED_EDGE('',*,*,#108484,.F.); +#109686 = PLANE('',#109687); +#109687 = AXIS2_PLACEMENT_3D('',#109688,#109689,#109690); +#109688 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#109689 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109690 = DIRECTION('',(0.,0.,-1.)); +#109691 = ADVANCED_FACE('',(#109692),#109703,.T.); +#109692 = FACE_BOUND('',#109693,.T.); +#109693 = EDGE_LOOP('',(#109694,#109700,#109701,#109702)); +#109694 = ORIENTED_EDGE('',*,*,#109695,.T.); +#109695 = EDGE_CURVE('',#108659,#108732,#109696,.T.); +#109696 = LINE('',#109697,#109698); +#109697 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#109698 = VECTOR('',#109699,1.); +#109699 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109700 = ORIENTED_EDGE('',*,*,#108739,.T.); +#109701 = ORIENTED_EDGE('',*,*,#108690,.F.); +#109702 = ORIENTED_EDGE('',*,*,#108666,.F.); +#109703 = PLANE('',#109704); +#109704 = AXIS2_PLACEMENT_3D('',#109705,#109706,#109707); +#109705 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#109706 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109707 = DIRECTION('',(0.,0.,1.)); +#109708 = ADVANCED_FACE('',(#109709),#109720,.T.); +#109709 = FACE_BOUND('',#109710,.T.); +#109710 = EDGE_LOOP('',(#109711,#109717,#109718,#109719)); +#109711 = ORIENTED_EDGE('',*,*,#109712,.T.); +#109712 = EDGE_CURVE('',#108651,#108724,#109713,.T.); +#109713 = LINE('',#109714,#109715); +#109714 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#109715 = VECTOR('',#109716,1.); +#109716 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109717 = ORIENTED_EDGE('',*,*,#108731,.T.); +#109718 = ORIENTED_EDGE('',*,*,#109695,.F.); +#109719 = ORIENTED_EDGE('',*,*,#108658,.F.); +#109720 = PLANE('',#109721); +#109721 = AXIS2_PLACEMENT_3D('',#109722,#109723,#109724); +#109722 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#109723 = DIRECTION('',(0.,0.,1.)); +#109724 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109725 = ADVANCED_FACE('',(#109726),#109732,.T.); +#109726 = FACE_BOUND('',#109727,.T.); +#109727 = EDGE_LOOP('',(#109728,#109729,#109730,#109731)); +#109728 = ORIENTED_EDGE('',*,*,#108758,.T.); +#109729 = ORIENTED_EDGE('',*,*,#108723,.T.); +#109730 = ORIENTED_EDGE('',*,*,#109712,.F.); +#109731 = ORIENTED_EDGE('',*,*,#108650,.F.); +#109732 = PLANE('',#109733); +#109733 = AXIS2_PLACEMENT_3D('',#109734,#109735,#109736); +#109734 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#109735 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109736 = DIRECTION('',(0.,0.,-1.)); +#109737 = ADVANCED_FACE('',(#109738),#109749,.T.); +#109738 = FACE_BOUND('',#109739,.T.); +#109739 = EDGE_LOOP('',(#109740,#109746,#109747,#109748)); +#109740 = ORIENTED_EDGE('',*,*,#109741,.T.); +#109741 = EDGE_CURVE('',#108825,#108898,#109742,.T.); +#109742 = LINE('',#109743,#109744); +#109743 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#109744 = VECTOR('',#109745,1.); +#109745 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109746 = ORIENTED_EDGE('',*,*,#108905,.T.); +#109747 = ORIENTED_EDGE('',*,*,#108856,.F.); +#109748 = ORIENTED_EDGE('',*,*,#108832,.F.); +#109749 = PLANE('',#109750); +#109750 = AXIS2_PLACEMENT_3D('',#109751,#109752,#109753); +#109751 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#109752 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109753 = DIRECTION('',(0.,0.,1.)); +#109754 = ADVANCED_FACE('',(#109755),#109766,.T.); +#109755 = FACE_BOUND('',#109756,.T.); +#109756 = EDGE_LOOP('',(#109757,#109763,#109764,#109765)); +#109757 = ORIENTED_EDGE('',*,*,#109758,.T.); +#109758 = EDGE_CURVE('',#108817,#108890,#109759,.T.); +#109759 = LINE('',#109760,#109761); +#109760 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#109761 = VECTOR('',#109762,1.); +#109762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109763 = ORIENTED_EDGE('',*,*,#108897,.T.); +#109764 = ORIENTED_EDGE('',*,*,#109741,.F.); +#109765 = ORIENTED_EDGE('',*,*,#108824,.F.); +#109766 = PLANE('',#109767); +#109767 = AXIS2_PLACEMENT_3D('',#109768,#109769,#109770); +#109768 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#109769 = DIRECTION('',(0.,0.,1.)); +#109770 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109771 = ADVANCED_FACE('',(#109772),#109778,.T.); +#109772 = FACE_BOUND('',#109773,.T.); +#109773 = EDGE_LOOP('',(#109774,#109775,#109776,#109777)); +#109774 = ORIENTED_EDGE('',*,*,#108924,.T.); +#109775 = ORIENTED_EDGE('',*,*,#108889,.T.); +#109776 = ORIENTED_EDGE('',*,*,#109758,.F.); +#109777 = ORIENTED_EDGE('',*,*,#108816,.F.); +#109778 = PLANE('',#109779); +#109779 = AXIS2_PLACEMENT_3D('',#109780,#109781,#109782); +#109780 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#109781 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109782 = DIRECTION('',(0.,0.,-1.)); +#109783 = ADVANCED_FACE('',(#109784),#109795,.T.); +#109784 = FACE_BOUND('',#109785,.T.); +#109785 = EDGE_LOOP('',(#109786,#109792,#109793,#109794)); +#109786 = ORIENTED_EDGE('',*,*,#109787,.T.); +#109787 = EDGE_CURVE('',#108991,#109064,#109788,.T.); +#109788 = LINE('',#109789,#109790); +#109789 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#109790 = VECTOR('',#109791,1.); +#109791 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109792 = ORIENTED_EDGE('',*,*,#109071,.T.); +#109793 = ORIENTED_EDGE('',*,*,#109022,.F.); +#109794 = ORIENTED_EDGE('',*,*,#108998,.F.); +#109795 = PLANE('',#109796); +#109796 = AXIS2_PLACEMENT_3D('',#109797,#109798,#109799); +#109797 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#109798 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109799 = DIRECTION('',(0.,0.,1.)); +#109800 = ADVANCED_FACE('',(#109801),#109812,.T.); +#109801 = FACE_BOUND('',#109802,.T.); +#109802 = EDGE_LOOP('',(#109803,#109809,#109810,#109811)); +#109803 = ORIENTED_EDGE('',*,*,#109804,.T.); +#109804 = EDGE_CURVE('',#108983,#109056,#109805,.T.); +#109805 = LINE('',#109806,#109807); +#109806 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#109807 = VECTOR('',#109808,1.); +#109808 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109809 = ORIENTED_EDGE('',*,*,#109063,.T.); +#109810 = ORIENTED_EDGE('',*,*,#109787,.F.); +#109811 = ORIENTED_EDGE('',*,*,#108990,.F.); +#109812 = PLANE('',#109813); +#109813 = AXIS2_PLACEMENT_3D('',#109814,#109815,#109816); +#109814 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#109815 = DIRECTION('',(0.,0.,1.)); +#109816 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109817 = ADVANCED_FACE('',(#109818),#109824,.T.); +#109818 = FACE_BOUND('',#109819,.T.); +#109819 = EDGE_LOOP('',(#109820,#109821,#109822,#109823)); +#109820 = ORIENTED_EDGE('',*,*,#109090,.T.); +#109821 = ORIENTED_EDGE('',*,*,#109055,.T.); +#109822 = ORIENTED_EDGE('',*,*,#109804,.F.); +#109823 = ORIENTED_EDGE('',*,*,#108982,.F.); +#109824 = PLANE('',#109825); +#109825 = AXIS2_PLACEMENT_3D('',#109826,#109827,#109828); +#109826 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#109827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109828 = DIRECTION('',(0.,0.,-1.)); +#109829 = ADVANCED_FACE('',(#109830),#109841,.T.); +#109830 = FACE_BOUND('',#109831,.T.); +#109831 = EDGE_LOOP('',(#109832,#109838,#109839,#109840)); +#109832 = ORIENTED_EDGE('',*,*,#109833,.T.); +#109833 = EDGE_CURVE('',#109157,#109230,#109834,.T.); +#109834 = LINE('',#109835,#109836); +#109835 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109836 = VECTOR('',#109837,1.); +#109837 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109838 = ORIENTED_EDGE('',*,*,#109237,.T.); +#109839 = ORIENTED_EDGE('',*,*,#109188,.F.); +#109840 = ORIENTED_EDGE('',*,*,#109164,.F.); +#109841 = PLANE('',#109842); +#109842 = AXIS2_PLACEMENT_3D('',#109843,#109844,#109845); +#109843 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109844 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109845 = DIRECTION('',(0.,0.,1.)); +#109846 = ADVANCED_FACE('',(#109847),#109858,.T.); +#109847 = FACE_BOUND('',#109848,.T.); +#109848 = EDGE_LOOP('',(#109849,#109855,#109856,#109857)); +#109849 = ORIENTED_EDGE('',*,*,#109850,.T.); +#109850 = EDGE_CURVE('',#109149,#109222,#109851,.T.); +#109851 = LINE('',#109852,#109853); +#109852 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109853 = VECTOR('',#109854,1.); +#109854 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109855 = ORIENTED_EDGE('',*,*,#109229,.T.); +#109856 = ORIENTED_EDGE('',*,*,#109833,.F.); +#109857 = ORIENTED_EDGE('',*,*,#109156,.F.); +#109858 = PLANE('',#109859); +#109859 = AXIS2_PLACEMENT_3D('',#109860,#109861,#109862); +#109860 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109861 = DIRECTION('',(0.,0.,1.)); +#109862 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109863 = ADVANCED_FACE('',(#109864),#109870,.T.); +#109864 = FACE_BOUND('',#109865,.T.); +#109865 = EDGE_LOOP('',(#109866,#109867,#109868,#109869)); +#109866 = ORIENTED_EDGE('',*,*,#109256,.T.); +#109867 = ORIENTED_EDGE('',*,*,#109221,.T.); +#109868 = ORIENTED_EDGE('',*,*,#109850,.F.); +#109869 = ORIENTED_EDGE('',*,*,#109148,.F.); +#109870 = PLANE('',#109871); +#109871 = AXIS2_PLACEMENT_3D('',#109872,#109873,#109874); +#109872 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109873 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109874 = DIRECTION('',(0.,0.,-1.)); +#109875 = ADVANCED_FACE('',(#109876),#109887,.T.); +#109876 = FACE_BOUND('',#109877,.T.); +#109877 = EDGE_LOOP('',(#109878,#109884,#109885,#109886)); +#109878 = ORIENTED_EDGE('',*,*,#109879,.T.); +#109879 = EDGE_CURVE('',#109323,#109396,#109880,.T.); +#109880 = LINE('',#109881,#109882); +#109881 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109882 = VECTOR('',#109883,1.); +#109883 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109884 = ORIENTED_EDGE('',*,*,#109403,.T.); +#109885 = ORIENTED_EDGE('',*,*,#109354,.F.); +#109886 = ORIENTED_EDGE('',*,*,#109330,.F.); +#109887 = PLANE('',#109888); +#109888 = AXIS2_PLACEMENT_3D('',#109889,#109890,#109891); +#109889 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109890 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109891 = DIRECTION('',(0.,0.,1.)); +#109892 = ADVANCED_FACE('',(#109893),#109904,.T.); +#109893 = FACE_BOUND('',#109894,.T.); +#109894 = EDGE_LOOP('',(#109895,#109901,#109902,#109903)); +#109895 = ORIENTED_EDGE('',*,*,#109896,.T.); +#109896 = EDGE_CURVE('',#109315,#109388,#109897,.T.); +#109897 = LINE('',#109898,#109899); +#109898 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109899 = VECTOR('',#109900,1.); +#109900 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109901 = ORIENTED_EDGE('',*,*,#109395,.T.); +#109902 = ORIENTED_EDGE('',*,*,#109879,.F.); +#109903 = ORIENTED_EDGE('',*,*,#109322,.F.); +#109904 = PLANE('',#109905); +#109905 = AXIS2_PLACEMENT_3D('',#109906,#109907,#109908); +#109906 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109907 = DIRECTION('',(0.,0.,1.)); +#109908 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109909 = ADVANCED_FACE('',(#109910),#109916,.T.); +#109910 = FACE_BOUND('',#109911,.T.); +#109911 = EDGE_LOOP('',(#109912,#109913,#109914,#109915)); +#109912 = ORIENTED_EDGE('',*,*,#109422,.T.); +#109913 = ORIENTED_EDGE('',*,*,#109387,.T.); +#109914 = ORIENTED_EDGE('',*,*,#109896,.F.); +#109915 = ORIENTED_EDGE('',*,*,#109314,.F.); +#109916 = PLANE('',#109917); +#109917 = AXIS2_PLACEMENT_3D('',#109918,#109919,#109920); +#109918 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109919 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109920 = DIRECTION('',(0.,0.,-1.)); +#109921 = ADVANCED_FACE('',(#109922),#109933,.T.); +#109922 = FACE_BOUND('',#109923,.T.); +#109923 = EDGE_LOOP('',(#109924,#109930,#109931,#109932)); +#109924 = ORIENTED_EDGE('',*,*,#109925,.T.); +#109925 = EDGE_CURVE('',#109489,#109562,#109926,.T.); +#109926 = LINE('',#109927,#109928); +#109927 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109928 = VECTOR('',#109929,1.); +#109929 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109930 = ORIENTED_EDGE('',*,*,#109569,.T.); +#109931 = ORIENTED_EDGE('',*,*,#109520,.F.); +#109932 = ORIENTED_EDGE('',*,*,#109496,.F.); +#109933 = PLANE('',#109934); +#109934 = AXIS2_PLACEMENT_3D('',#109935,#109936,#109937); +#109935 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109936 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109937 = DIRECTION('',(0.,0.,1.)); +#109938 = ADVANCED_FACE('',(#109939),#109950,.T.); +#109939 = FACE_BOUND('',#109940,.T.); +#109940 = EDGE_LOOP('',(#109941,#109947,#109948,#109949)); +#109941 = ORIENTED_EDGE('',*,*,#109942,.T.); +#109942 = EDGE_CURVE('',#109481,#109554,#109943,.T.); +#109943 = LINE('',#109944,#109945); +#109944 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109945 = VECTOR('',#109946,1.); +#109946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109947 = ORIENTED_EDGE('',*,*,#109561,.T.); +#109948 = ORIENTED_EDGE('',*,*,#109925,.F.); +#109949 = ORIENTED_EDGE('',*,*,#109488,.F.); +#109950 = PLANE('',#109951); +#109951 = AXIS2_PLACEMENT_3D('',#109952,#109953,#109954); +#109952 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109953 = DIRECTION('',(0.,0.,1.)); +#109954 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109955 = ADVANCED_FACE('',(#109956),#109962,.T.); +#109956 = FACE_BOUND('',#109957,.T.); +#109957 = EDGE_LOOP('',(#109958,#109959,#109960,#109961)); +#109958 = ORIENTED_EDGE('',*,*,#109588,.T.); +#109959 = ORIENTED_EDGE('',*,*,#109553,.T.); +#109960 = ORIENTED_EDGE('',*,*,#109942,.F.); +#109961 = ORIENTED_EDGE('',*,*,#109480,.F.); +#109962 = PLANE('',#109963); +#109963 = AXIS2_PLACEMENT_3D('',#109964,#109965,#109966); +#109964 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109965 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109966 = DIRECTION('',(0.,0.,-1.)); +#109967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#109971)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#109968,#109969,#109970)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#109968 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#109969 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#109970 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#109971 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#109968, + 'distance_accuracy_value','confusion accuracy'); +#109972 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#109973,#109975); +#109973 = ( REPRESENTATION_RELATIONSHIP('','',#103476,#103453) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#109974) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#109974 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103454); +#109975 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #109976); +#109976 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('151','=>[0:1:1:64]','',#103448 + ,#103471,$); +#109977 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#103473)); +#109978 = SHAPE_DEFINITION_REPRESENTATION(#109979,#109985); +#109979 = PRODUCT_DEFINITION_SHAPE('','',#109980); +#109980 = PRODUCT_DEFINITION('design','',#109981,#109984); +#109981 = PRODUCT_DEFINITION_FORMATION('','',#109982); +#109982 = PRODUCT('PinSocket_1x06_P2.54mm_Vertical', + 'PinSocket_1x06_P2.54mm_Vertical','',(#109983)); +#109983 = PRODUCT_CONTEXT('',#2,'mechanical'); +#109984 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#109985 = SHAPE_REPRESENTATION('',(#11,#109986),#109990); +#109986 = AXIS2_PLACEMENT_3D('',#109987,#109988,#109989); +#109987 = CARTESIAN_POINT('',(0.,0.,0.)); +#109988 = DIRECTION('',(0.,0.,1.)); +#109989 = DIRECTION('',(1.,0.,-0.)); +#109990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#109994)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#109991,#109992,#109993)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#109991 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#109992 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#109993 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#109994 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#109991, + 'distance_accuracy_value','confusion accuracy'); +#109995 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#109996,#109998); +#109996 = ( REPRESENTATION_RELATIONSHIP('','',#109985,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#109997) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#109997 = ITEM_DEFINED_TRANSFORMATION('','',#11,#483); +#109998 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #109999); +#109999 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('154','MOD1','',#5,#109980,$); +#110000 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#109982)); +#110001 = SHAPE_DEFINITION_REPRESENTATION(#110002,#110008); +#110002 = PRODUCT_DEFINITION_SHAPE('','',#110003); +#110003 = PRODUCT_DEFINITION('design','',#110004,#110007); +#110004 = PRODUCT_DEFINITION_FORMATION('','',#110005); +#110005 = PRODUCT('PinSocket_1x06_P2.54mm_Vertical', + 'PinSocket_1x06_P2.54mm_Vertical','',(#110006)); +#110006 = PRODUCT_CONTEXT('',#2,'mechanical'); +#110007 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#110008 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#110009),#114947); +#110009 = MANIFOLD_SOLID_BREP('',#110010); +#110010 = CLOSED_SHELL('',(#110011,#110051,#110114,#110177,#110194, + #110415,#110437,#110454,#110867,#110879,#110891,#110922,#110946, + #110970,#110987,#111018,#111042,#111066,#111083,#111114,#111138, + #111162,#111179,#111210,#111234,#111258,#111275,#111306,#111330, + #111354,#111371,#111402,#111426,#111450,#111467,#111484,#111531, + #111548,#111595,#111612,#111659,#111676,#111723,#111740,#111787, + #111804,#111851,#111868,#111915,#111932,#111979,#111996,#112043, + #112060,#112107,#112124,#112171,#112188,#112235,#112266,#112322, + #112346,#112395,#112426,#112482,#112506,#112555,#112586,#112642, + #112666,#112715,#112746,#112802,#112826,#112875,#112906,#112962, + #112986,#113035,#113066,#113122,#113146,#113195,#113212,#113229, + #113246,#113263,#113275,#113292,#113309,#113326,#113343,#113355, + #113372,#113389,#113406,#113423,#113435,#113452,#113469,#113486, + #113503,#113515,#113532,#113549,#113566,#113583,#113595,#113612, + #113629,#113646,#113663,#113675,#113692,#113709,#113758,#113782, + #113824,#113841,#113858,#113875,#113924,#113948,#113990,#114007, + #114024,#114041,#114090,#114114,#114156,#114173,#114190,#114207, + #114256,#114280,#114322,#114339,#114356,#114373,#114422,#114446, + #114488,#114505,#114522,#114539,#114588,#114612,#114654,#114671, + #114688,#114705,#114717,#114734,#114751,#114763,#114780,#114797, + #114809,#114826,#114843,#114855,#114872,#114889,#114901,#114918, + #114935)); +#110011 = ADVANCED_FACE('',(#110012),#110046,.F.); +#110012 = FACE_BOUND('',#110013,.F.); +#110013 = EDGE_LOOP('',(#110014,#110024,#110032,#110040)); +#110014 = ORIENTED_EDGE('',*,*,#110015,.T.); +#110015 = EDGE_CURVE('',#110016,#110018,#110020,.T.); +#110016 = VERTEX_POINT('',#110017); +#110017 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110018 = VERTEX_POINT('',#110019); +#110019 = CARTESIAN_POINT('',(1.27,-13.97,8.5)); +#110020 = LINE('',#110021,#110022); +#110021 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110022 = VECTOR('',#110023,1.); +#110023 = DIRECTION('',(0.,0.,1.)); +#110024 = ORIENTED_EDGE('',*,*,#110025,.T.); +#110025 = EDGE_CURVE('',#110018,#110026,#110028,.T.); +#110026 = VERTEX_POINT('',#110027); +#110027 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#110028 = LINE('',#110029,#110030); +#110029 = CARTESIAN_POINT('',(1.27,-13.97,8.5)); +#110030 = VECTOR('',#110031,1.); +#110031 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110032 = ORIENTED_EDGE('',*,*,#110033,.F.); +#110033 = EDGE_CURVE('',#110034,#110026,#110036,.T.); +#110034 = VERTEX_POINT('',#110035); +#110035 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110036 = LINE('',#110037,#110038); +#110037 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110038 = VECTOR('',#110039,1.); +#110039 = DIRECTION('',(0.,0.,1.)); +#110040 = ORIENTED_EDGE('',*,*,#110041,.F.); +#110041 = EDGE_CURVE('',#110016,#110034,#110042,.T.); +#110042 = LINE('',#110043,#110044); +#110043 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110044 = VECTOR('',#110045,1.); +#110045 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110046 = PLANE('',#110047); +#110047 = AXIS2_PLACEMENT_3D('',#110048,#110049,#110050); +#110048 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110049 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110050 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110051 = ADVANCED_FACE('',(#110052),#110109,.F.); +#110052 = FACE_BOUND('',#110053,.F.); +#110053 = EDGE_LOOP('',(#110054,#110064,#110072,#110078,#110079,#110087, + #110095,#110103)); +#110054 = ORIENTED_EDGE('',*,*,#110055,.F.); +#110055 = EDGE_CURVE('',#110056,#110058,#110060,.T.); +#110056 = VERTEX_POINT('',#110057); +#110057 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110058 = VERTEX_POINT('',#110059); +#110059 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.)); +#110060 = LINE('',#110061,#110062); +#110061 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110062 = VECTOR('',#110063,1.); +#110063 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110064 = ORIENTED_EDGE('',*,*,#110065,.T.); +#110065 = EDGE_CURVE('',#110056,#110066,#110068,.T.); +#110066 = VERTEX_POINT('',#110067); +#110067 = CARTESIAN_POINT('',(-1.27,-13.97,8.5)); +#110068 = LINE('',#110069,#110070); +#110069 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110070 = VECTOR('',#110071,1.); +#110071 = DIRECTION('',(0.,0.,1.)); +#110072 = ORIENTED_EDGE('',*,*,#110073,.T.); +#110073 = EDGE_CURVE('',#110066,#110018,#110074,.T.); +#110074 = LINE('',#110075,#110076); +#110075 = CARTESIAN_POINT('',(-1.27,-13.97,8.5)); +#110076 = VECTOR('',#110077,1.); +#110077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110078 = ORIENTED_EDGE('',*,*,#110015,.F.); +#110079 = ORIENTED_EDGE('',*,*,#110080,.F.); +#110080 = EDGE_CURVE('',#110081,#110016,#110083,.T.); +#110081 = VERTEX_POINT('',#110082); +#110082 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110083 = LINE('',#110084,#110085); +#110084 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110085 = VECTOR('',#110086,1.); +#110086 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110087 = ORIENTED_EDGE('',*,*,#110088,.T.); +#110088 = EDGE_CURVE('',#110081,#110089,#110091,.T.); +#110089 = VERTEX_POINT('',#110090); +#110090 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.2)); +#110091 = LINE('',#110092,#110093); +#110092 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110093 = VECTOR('',#110094,1.); +#110094 = DIRECTION('',(0.,0.,1.)); +#110095 = ORIENTED_EDGE('',*,*,#110096,.F.); +#110096 = EDGE_CURVE('',#110097,#110089,#110099,.T.); +#110097 = VERTEX_POINT('',#110098); +#110098 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.2)); +#110099 = LINE('',#110100,#110101); +#110100 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.2)); +#110101 = VECTOR('',#110102,1.); +#110102 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110103 = ORIENTED_EDGE('',*,*,#110104,.F.); +#110104 = EDGE_CURVE('',#110058,#110097,#110105,.T.); +#110105 = LINE('',#110106,#110107); +#110106 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.)); +#110107 = VECTOR('',#110108,1.); +#110108 = DIRECTION('',(0.,0.,1.)); +#110109 = PLANE('',#110110); +#110110 = AXIS2_PLACEMENT_3D('',#110111,#110112,#110113); +#110111 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110112 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110113 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110114 = ADVANCED_FACE('',(#110115),#110172,.F.); +#110115 = FACE_BOUND('',#110116,.F.); +#110116 = EDGE_LOOP('',(#110117,#110125,#110126,#110134,#110142,#110150, + #110158,#110166)); +#110117 = ORIENTED_EDGE('',*,*,#110118,.F.); +#110118 = EDGE_CURVE('',#110034,#110119,#110121,.T.); +#110119 = VERTEX_POINT('',#110120); +#110120 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#110121 = LINE('',#110122,#110123); +#110122 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110123 = VECTOR('',#110124,1.); +#110124 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110125 = ORIENTED_EDGE('',*,*,#110033,.T.); +#110126 = ORIENTED_EDGE('',*,*,#110127,.T.); +#110127 = EDGE_CURVE('',#110026,#110128,#110130,.T.); +#110128 = VERTEX_POINT('',#110129); +#110129 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#110130 = LINE('',#110131,#110132); +#110131 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#110132 = VECTOR('',#110133,1.); +#110133 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110134 = ORIENTED_EDGE('',*,*,#110135,.F.); +#110135 = EDGE_CURVE('',#110136,#110128,#110138,.T.); +#110136 = VERTEX_POINT('',#110137); +#110137 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110138 = LINE('',#110139,#110140); +#110139 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110140 = VECTOR('',#110141,1.); +#110141 = DIRECTION('',(0.,0.,1.)); +#110142 = ORIENTED_EDGE('',*,*,#110143,.F.); +#110143 = EDGE_CURVE('',#110144,#110136,#110146,.T.); +#110144 = VERTEX_POINT('',#110145); +#110145 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110146 = LINE('',#110147,#110148); +#110147 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110148 = VECTOR('',#110149,1.); +#110149 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110150 = ORIENTED_EDGE('',*,*,#110151,.T.); +#110151 = EDGE_CURVE('',#110144,#110152,#110154,.T.); +#110152 = VERTEX_POINT('',#110153); +#110153 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#110154 = LINE('',#110155,#110156); +#110155 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110156 = VECTOR('',#110157,1.); +#110157 = DIRECTION('',(0.,0.,1.)); +#110158 = ORIENTED_EDGE('',*,*,#110159,.F.); +#110159 = EDGE_CURVE('',#110160,#110152,#110162,.T.); +#110160 = VERTEX_POINT('',#110161); +#110161 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#110162 = LINE('',#110163,#110164); +#110163 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#110164 = VECTOR('',#110165,1.); +#110165 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110166 = ORIENTED_EDGE('',*,*,#110167,.F.); +#110167 = EDGE_CURVE('',#110119,#110160,#110168,.T.); +#110168 = LINE('',#110169,#110170); +#110169 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#110170 = VECTOR('',#110171,1.); +#110171 = DIRECTION('',(0.,0.,1.)); +#110172 = PLANE('',#110173); +#110173 = AXIS2_PLACEMENT_3D('',#110174,#110175,#110176); +#110174 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110175 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110176 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110177 = ADVANCED_FACE('',(#110178),#110189,.F.); +#110178 = FACE_BOUND('',#110179,.F.); +#110179 = EDGE_LOOP('',(#110180,#110181,#110182,#110183)); +#110180 = ORIENTED_EDGE('',*,*,#110080,.T.); +#110181 = ORIENTED_EDGE('',*,*,#110041,.T.); +#110182 = ORIENTED_EDGE('',*,*,#110118,.T.); +#110183 = ORIENTED_EDGE('',*,*,#110184,.F.); +#110184 = EDGE_CURVE('',#110081,#110119,#110185,.T.); +#110185 = LINE('',#110186,#110187); +#110186 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110187 = VECTOR('',#110188,1.); +#110188 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110189 = PLANE('',#110190); +#110190 = AXIS2_PLACEMENT_3D('',#110191,#110192,#110193); +#110191 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,0.)); +#110192 = DIRECTION('',(0.,0.,1.)); +#110193 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110194 = ADVANCED_FACE('',(#110195,#110206,#110240,#110274,#110308, + #110342,#110376),#110410,.T.); +#110195 = FACE_BOUND('',#110196,.T.); +#110196 = EDGE_LOOP('',(#110197,#110198,#110199,#110205)); +#110197 = ORIENTED_EDGE('',*,*,#110025,.T.); +#110198 = ORIENTED_EDGE('',*,*,#110127,.T.); +#110199 = ORIENTED_EDGE('',*,*,#110200,.T.); +#110200 = EDGE_CURVE('',#110128,#110066,#110201,.T.); +#110201 = LINE('',#110202,#110203); +#110202 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#110203 = VECTOR('',#110204,1.); +#110204 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110205 = ORIENTED_EDGE('',*,*,#110073,.T.); +#110206 = FACE_BOUND('',#110207,.T.); +#110207 = EDGE_LOOP('',(#110208,#110218,#110226,#110234)); +#110208 = ORIENTED_EDGE('',*,*,#110209,.F.); +#110209 = EDGE_CURVE('',#110210,#110212,#110214,.T.); +#110210 = VERTEX_POINT('',#110211); +#110211 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#110212 = VERTEX_POINT('',#110213); +#110213 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#110214 = LINE('',#110215,#110216); +#110215 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#110216 = VECTOR('',#110217,1.); +#110217 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110218 = ORIENTED_EDGE('',*,*,#110219,.F.); +#110219 = EDGE_CURVE('',#110220,#110210,#110222,.T.); +#110220 = VERTEX_POINT('',#110221); +#110221 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#110222 = LINE('',#110223,#110224); +#110223 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#110224 = VECTOR('',#110225,1.); +#110225 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110226 = ORIENTED_EDGE('',*,*,#110227,.F.); +#110227 = EDGE_CURVE('',#110228,#110220,#110230,.T.); +#110228 = VERTEX_POINT('',#110229); +#110229 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#110230 = LINE('',#110231,#110232); +#110231 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#110232 = VECTOR('',#110233,1.); +#110233 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110234 = ORIENTED_EDGE('',*,*,#110235,.F.); +#110235 = EDGE_CURVE('',#110212,#110228,#110236,.T.); +#110236 = LINE('',#110237,#110238); +#110237 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#110238 = VECTOR('',#110239,1.); +#110239 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110240 = FACE_BOUND('',#110241,.T.); +#110241 = EDGE_LOOP('',(#110242,#110252,#110260,#110268)); +#110242 = ORIENTED_EDGE('',*,*,#110243,.F.); +#110243 = EDGE_CURVE('',#110244,#110246,#110248,.T.); +#110244 = VERTEX_POINT('',#110245); +#110245 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#110246 = VERTEX_POINT('',#110247); +#110247 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#110248 = LINE('',#110249,#110250); +#110249 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#110250 = VECTOR('',#110251,1.); +#110251 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110252 = ORIENTED_EDGE('',*,*,#110253,.F.); +#110253 = EDGE_CURVE('',#110254,#110244,#110256,.T.); +#110254 = VERTEX_POINT('',#110255); +#110255 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#110256 = LINE('',#110257,#110258); +#110257 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#110258 = VECTOR('',#110259,1.); +#110259 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110260 = ORIENTED_EDGE('',*,*,#110261,.F.); +#110261 = EDGE_CURVE('',#110262,#110254,#110264,.T.); +#110262 = VERTEX_POINT('',#110263); +#110263 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#110264 = LINE('',#110265,#110266); +#110265 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#110266 = VECTOR('',#110267,1.); +#110267 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110268 = ORIENTED_EDGE('',*,*,#110269,.F.); +#110269 = EDGE_CURVE('',#110246,#110262,#110270,.T.); +#110270 = LINE('',#110271,#110272); +#110271 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#110272 = VECTOR('',#110273,1.); +#110273 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110274 = FACE_BOUND('',#110275,.T.); +#110275 = EDGE_LOOP('',(#110276,#110286,#110294,#110302)); +#110276 = ORIENTED_EDGE('',*,*,#110277,.F.); +#110277 = EDGE_CURVE('',#110278,#110280,#110282,.T.); +#110278 = VERTEX_POINT('',#110279); +#110279 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#110280 = VERTEX_POINT('',#110281); +#110281 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#110282 = LINE('',#110283,#110284); +#110283 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#110284 = VECTOR('',#110285,1.); +#110285 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110286 = ORIENTED_EDGE('',*,*,#110287,.F.); +#110287 = EDGE_CURVE('',#110288,#110278,#110290,.T.); +#110288 = VERTEX_POINT('',#110289); +#110289 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#110290 = LINE('',#110291,#110292); +#110291 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#110292 = VECTOR('',#110293,1.); +#110293 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110294 = ORIENTED_EDGE('',*,*,#110295,.F.); +#110295 = EDGE_CURVE('',#110296,#110288,#110298,.T.); +#110296 = VERTEX_POINT('',#110297); +#110297 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#110298 = LINE('',#110299,#110300); +#110299 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#110300 = VECTOR('',#110301,1.); +#110301 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110302 = ORIENTED_EDGE('',*,*,#110303,.F.); +#110303 = EDGE_CURVE('',#110280,#110296,#110304,.T.); +#110304 = LINE('',#110305,#110306); +#110305 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#110306 = VECTOR('',#110307,1.); +#110307 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110308 = FACE_BOUND('',#110309,.T.); +#110309 = EDGE_LOOP('',(#110310,#110320,#110328,#110336)); +#110310 = ORIENTED_EDGE('',*,*,#110311,.F.); +#110311 = EDGE_CURVE('',#110312,#110314,#110316,.T.); +#110312 = VERTEX_POINT('',#110313); +#110313 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#110314 = VERTEX_POINT('',#110315); +#110315 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#110316 = LINE('',#110317,#110318); +#110317 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#110318 = VECTOR('',#110319,1.); +#110319 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110320 = ORIENTED_EDGE('',*,*,#110321,.F.); +#110321 = EDGE_CURVE('',#110322,#110312,#110324,.T.); +#110322 = VERTEX_POINT('',#110323); +#110323 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#110324 = LINE('',#110325,#110326); +#110325 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#110326 = VECTOR('',#110327,1.); +#110327 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110328 = ORIENTED_EDGE('',*,*,#110329,.F.); +#110329 = EDGE_CURVE('',#110330,#110322,#110332,.T.); +#110330 = VERTEX_POINT('',#110331); +#110331 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#110332 = LINE('',#110333,#110334); +#110333 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#110334 = VECTOR('',#110335,1.); +#110335 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110336 = ORIENTED_EDGE('',*,*,#110337,.F.); +#110337 = EDGE_CURVE('',#110314,#110330,#110338,.T.); +#110338 = LINE('',#110339,#110340); +#110339 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#110340 = VECTOR('',#110341,1.); +#110341 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110342 = FACE_BOUND('',#110343,.T.); +#110343 = EDGE_LOOP('',(#110344,#110354,#110362,#110370)); +#110344 = ORIENTED_EDGE('',*,*,#110345,.F.); +#110345 = EDGE_CURVE('',#110346,#110348,#110350,.T.); +#110346 = VERTEX_POINT('',#110347); +#110347 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#110348 = VERTEX_POINT('',#110349); +#110349 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#110350 = LINE('',#110351,#110352); +#110351 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#110352 = VECTOR('',#110353,1.); +#110353 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110354 = ORIENTED_EDGE('',*,*,#110355,.F.); +#110355 = EDGE_CURVE('',#110356,#110346,#110358,.T.); +#110356 = VERTEX_POINT('',#110357); +#110357 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#110358 = LINE('',#110359,#110360); +#110359 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#110360 = VECTOR('',#110361,1.); +#110361 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110362 = ORIENTED_EDGE('',*,*,#110363,.F.); +#110363 = EDGE_CURVE('',#110364,#110356,#110366,.T.); +#110364 = VERTEX_POINT('',#110365); +#110365 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#110366 = LINE('',#110367,#110368); +#110367 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#110368 = VECTOR('',#110369,1.); +#110369 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110370 = ORIENTED_EDGE('',*,*,#110371,.F.); +#110371 = EDGE_CURVE('',#110348,#110364,#110372,.T.); +#110372 = LINE('',#110373,#110374); +#110373 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#110374 = VECTOR('',#110375,1.); +#110375 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110376 = FACE_BOUND('',#110377,.T.); +#110377 = EDGE_LOOP('',(#110378,#110388,#110396,#110404)); +#110378 = ORIENTED_EDGE('',*,*,#110379,.F.); +#110379 = EDGE_CURVE('',#110380,#110382,#110384,.T.); +#110380 = VERTEX_POINT('',#110381); +#110381 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#110382 = VERTEX_POINT('',#110383); +#110383 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#110384 = LINE('',#110385,#110386); +#110385 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#110386 = VECTOR('',#110387,1.); +#110387 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110388 = ORIENTED_EDGE('',*,*,#110389,.F.); +#110389 = EDGE_CURVE('',#110390,#110380,#110392,.T.); +#110390 = VERTEX_POINT('',#110391); +#110391 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#110392 = LINE('',#110393,#110394); +#110393 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#110394 = VECTOR('',#110395,1.); +#110395 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110396 = ORIENTED_EDGE('',*,*,#110397,.F.); +#110397 = EDGE_CURVE('',#110398,#110390,#110400,.T.); +#110398 = VERTEX_POINT('',#110399); +#110399 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#110400 = LINE('',#110401,#110402); +#110401 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#110402 = VECTOR('',#110403,1.); +#110403 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110404 = ORIENTED_EDGE('',*,*,#110405,.F.); +#110405 = EDGE_CURVE('',#110382,#110398,#110406,.T.); +#110406 = LINE('',#110407,#110408); +#110407 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#110408 = VECTOR('',#110409,1.); +#110409 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110410 = PLANE('',#110411); +#110411 = AXIS2_PLACEMENT_3D('',#110412,#110413,#110414); +#110412 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,8.5)); +#110413 = DIRECTION('',(0.,0.,1.)); +#110414 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110415 = ADVANCED_FACE('',(#110416),#110432,.F.); +#110416 = FACE_BOUND('',#110417,.F.); +#110417 = EDGE_LOOP('',(#110418,#110419,#110425,#110426)); +#110418 = ORIENTED_EDGE('',*,*,#110055,.T.); +#110419 = ORIENTED_EDGE('',*,*,#110420,.F.); +#110420 = EDGE_CURVE('',#110144,#110058,#110421,.T.); +#110421 = LINE('',#110422,#110423); +#110422 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110423 = VECTOR('',#110424,1.); +#110424 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110425 = ORIENTED_EDGE('',*,*,#110143,.T.); +#110426 = ORIENTED_EDGE('',*,*,#110427,.T.); +#110427 = EDGE_CURVE('',#110136,#110056,#110428,.T.); +#110428 = LINE('',#110429,#110430); +#110429 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110430 = VECTOR('',#110431,1.); +#110431 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110432 = PLANE('',#110433); +#110433 = AXIS2_PLACEMENT_3D('',#110434,#110435,#110436); +#110434 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,0.)); +#110435 = DIRECTION('',(0.,0.,1.)); +#110436 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110437 = ADVANCED_FACE('',(#110438),#110449,.T.); +#110438 = FACE_BOUND('',#110439,.T.); +#110439 = EDGE_LOOP('',(#110440,#110441,#110447,#110448)); +#110440 = ORIENTED_EDGE('',*,*,#110151,.T.); +#110441 = ORIENTED_EDGE('',*,*,#110442,.T.); +#110442 = EDGE_CURVE('',#110152,#110097,#110443,.T.); +#110443 = LINE('',#110444,#110445); +#110444 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#110445 = VECTOR('',#110446,1.); +#110446 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110447 = ORIENTED_EDGE('',*,*,#110104,.F.); +#110448 = ORIENTED_EDGE('',*,*,#110420,.F.); +#110449 = PLANE('',#110450); +#110450 = AXIS2_PLACEMENT_3D('',#110451,#110452,#110453); +#110451 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110452 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110453 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110454 = ADVANCED_FACE('',(#110455,#110466,#110532,#110598,#110664, + #110730,#110796),#110862,.F.); +#110455 = FACE_BOUND('',#110456,.F.); +#110456 = EDGE_LOOP('',(#110457,#110463,#110464,#110465)); +#110457 = ORIENTED_EDGE('',*,*,#110458,.T.); +#110458 = EDGE_CURVE('',#110089,#110160,#110459,.T.); +#110459 = LINE('',#110460,#110461); +#110460 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.2)); +#110461 = VECTOR('',#110462,1.); +#110462 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110463 = ORIENTED_EDGE('',*,*,#110159,.T.); +#110464 = ORIENTED_EDGE('',*,*,#110442,.T.); +#110465 = ORIENTED_EDGE('',*,*,#110096,.T.); +#110466 = FACE_BOUND('',#110467,.F.); +#110467 = EDGE_LOOP('',(#110468,#110478,#110486,#110494,#110502,#110510, + #110518,#110526)); +#110468 = ORIENTED_EDGE('',*,*,#110469,.F.); +#110469 = EDGE_CURVE('',#110470,#110472,#110474,.T.); +#110470 = VERTEX_POINT('',#110471); +#110471 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110472 = VERTEX_POINT('',#110473); +#110473 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#110474 = LINE('',#110475,#110476); +#110475 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110476 = VECTOR('',#110477,1.); +#110477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110478 = ORIENTED_EDGE('',*,*,#110479,.T.); +#110479 = EDGE_CURVE('',#110470,#110480,#110482,.T.); +#110480 = VERTEX_POINT('',#110481); +#110481 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#110482 = LINE('',#110483,#110484); +#110483 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110484 = VECTOR('',#110485,1.); +#110485 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110486 = ORIENTED_EDGE('',*,*,#110487,.F.); +#110487 = EDGE_CURVE('',#110488,#110480,#110490,.T.); +#110488 = VERTEX_POINT('',#110489); +#110489 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#110490 = LINE('',#110491,#110492); +#110491 = CARTESIAN_POINT('',(-0.1,-9.525,0.2)); +#110492 = VECTOR('',#110493,1.); +#110493 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110494 = ORIENTED_EDGE('',*,*,#110495,.T.); +#110495 = EDGE_CURVE('',#110488,#110496,#110498,.T.); +#110496 = VERTEX_POINT('',#110497); +#110497 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#110498 = LINE('',#110499,#110500); +#110499 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110500 = VECTOR('',#110501,1.); +#110501 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110502 = ORIENTED_EDGE('',*,*,#110503,.T.); +#110503 = EDGE_CURVE('',#110496,#110504,#110506,.T.); +#110504 = VERTEX_POINT('',#110505); +#110505 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#110506 = LINE('',#110507,#110508); +#110507 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#110508 = VECTOR('',#110509,1.); +#110509 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110510 = ORIENTED_EDGE('',*,*,#110511,.T.); +#110511 = EDGE_CURVE('',#110504,#110512,#110514,.T.); +#110512 = VERTEX_POINT('',#110513); +#110513 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#110514 = LINE('',#110515,#110516); +#110515 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#110516 = VECTOR('',#110517,1.); +#110517 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110518 = ORIENTED_EDGE('',*,*,#110519,.T.); +#110519 = EDGE_CURVE('',#110512,#110520,#110522,.T.); +#110520 = VERTEX_POINT('',#110521); +#110521 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#110522 = LINE('',#110523,#110524); +#110523 = CARTESIAN_POINT('',(0.1,-9.525,0.2)); +#110524 = VECTOR('',#110525,1.); +#110525 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110526 = ORIENTED_EDGE('',*,*,#110527,.T.); +#110527 = EDGE_CURVE('',#110520,#110472,#110528,.T.); +#110528 = LINE('',#110529,#110530); +#110529 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#110530 = VECTOR('',#110531,1.); +#110531 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110532 = FACE_BOUND('',#110533,.F.); +#110533 = EDGE_LOOP('',(#110534,#110544,#110552,#110560,#110568,#110576, + #110584,#110592)); +#110534 = ORIENTED_EDGE('',*,*,#110535,.F.); +#110535 = EDGE_CURVE('',#110536,#110538,#110540,.T.); +#110536 = VERTEX_POINT('',#110537); +#110537 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110538 = VERTEX_POINT('',#110539); +#110539 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#110540 = LINE('',#110541,#110542); +#110541 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110542 = VECTOR('',#110543,1.); +#110543 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110544 = ORIENTED_EDGE('',*,*,#110545,.T.); +#110545 = EDGE_CURVE('',#110536,#110546,#110548,.T.); +#110546 = VERTEX_POINT('',#110547); +#110547 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#110548 = LINE('',#110549,#110550); +#110549 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110550 = VECTOR('',#110551,1.); +#110551 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110552 = ORIENTED_EDGE('',*,*,#110553,.F.); +#110553 = EDGE_CURVE('',#110554,#110546,#110556,.T.); +#110554 = VERTEX_POINT('',#110555); +#110555 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#110556 = LINE('',#110557,#110558); +#110557 = CARTESIAN_POINT('',(-0.1,-8.255,0.2)); +#110558 = VECTOR('',#110559,1.); +#110559 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110560 = ORIENTED_EDGE('',*,*,#110561,.T.); +#110561 = EDGE_CURVE('',#110554,#110562,#110564,.T.); +#110562 = VERTEX_POINT('',#110563); +#110563 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#110564 = LINE('',#110565,#110566); +#110565 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110566 = VECTOR('',#110567,1.); +#110567 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110568 = ORIENTED_EDGE('',*,*,#110569,.T.); +#110569 = EDGE_CURVE('',#110562,#110570,#110572,.T.); +#110570 = VERTEX_POINT('',#110571); +#110571 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#110572 = LINE('',#110573,#110574); +#110573 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#110574 = VECTOR('',#110575,1.); +#110575 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110576 = ORIENTED_EDGE('',*,*,#110577,.T.); +#110577 = EDGE_CURVE('',#110570,#110578,#110580,.T.); +#110578 = VERTEX_POINT('',#110579); +#110579 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#110580 = LINE('',#110581,#110582); +#110581 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#110582 = VECTOR('',#110583,1.); +#110583 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110584 = ORIENTED_EDGE('',*,*,#110585,.T.); +#110585 = EDGE_CURVE('',#110578,#110586,#110588,.T.); +#110586 = VERTEX_POINT('',#110587); +#110587 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#110588 = LINE('',#110589,#110590); +#110589 = CARTESIAN_POINT('',(0.1,-8.255,0.2)); +#110590 = VECTOR('',#110591,1.); +#110591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110592 = ORIENTED_EDGE('',*,*,#110593,.T.); +#110593 = EDGE_CURVE('',#110586,#110538,#110594,.T.); +#110594 = LINE('',#110595,#110596); +#110595 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#110596 = VECTOR('',#110597,1.); +#110597 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110598 = FACE_BOUND('',#110599,.F.); +#110599 = EDGE_LOOP('',(#110600,#110610,#110618,#110626,#110634,#110642, + #110650,#110658)); +#110600 = ORIENTED_EDGE('',*,*,#110601,.F.); +#110601 = EDGE_CURVE('',#110602,#110604,#110606,.T.); +#110602 = VERTEX_POINT('',#110603); +#110603 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110604 = VERTEX_POINT('',#110605); +#110605 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#110606 = LINE('',#110607,#110608); +#110607 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110608 = VECTOR('',#110609,1.); +#110609 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110610 = ORIENTED_EDGE('',*,*,#110611,.T.); +#110611 = EDGE_CURVE('',#110602,#110612,#110614,.T.); +#110612 = VERTEX_POINT('',#110613); +#110613 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#110614 = LINE('',#110615,#110616); +#110615 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110616 = VECTOR('',#110617,1.); +#110617 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110618 = ORIENTED_EDGE('',*,*,#110619,.F.); +#110619 = EDGE_CURVE('',#110620,#110612,#110622,.T.); +#110620 = VERTEX_POINT('',#110621); +#110621 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#110622 = LINE('',#110623,#110624); +#110623 = CARTESIAN_POINT('',(-0.1,-6.985,0.2)); +#110624 = VECTOR('',#110625,1.); +#110625 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110626 = ORIENTED_EDGE('',*,*,#110627,.T.); +#110627 = EDGE_CURVE('',#110620,#110628,#110630,.T.); +#110628 = VERTEX_POINT('',#110629); +#110629 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#110630 = LINE('',#110631,#110632); +#110631 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110632 = VECTOR('',#110633,1.); +#110633 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110634 = ORIENTED_EDGE('',*,*,#110635,.T.); +#110635 = EDGE_CURVE('',#110628,#110636,#110638,.T.); +#110636 = VERTEX_POINT('',#110637); +#110637 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#110638 = LINE('',#110639,#110640); +#110639 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#110640 = VECTOR('',#110641,1.); +#110641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110642 = ORIENTED_EDGE('',*,*,#110643,.T.); +#110643 = EDGE_CURVE('',#110636,#110644,#110646,.T.); +#110644 = VERTEX_POINT('',#110645); +#110645 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#110646 = LINE('',#110647,#110648); +#110647 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#110648 = VECTOR('',#110649,1.); +#110649 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110650 = ORIENTED_EDGE('',*,*,#110651,.T.); +#110651 = EDGE_CURVE('',#110644,#110652,#110654,.T.); +#110652 = VERTEX_POINT('',#110653); +#110653 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#110654 = LINE('',#110655,#110656); +#110655 = CARTESIAN_POINT('',(0.1,-6.985,0.2)); +#110656 = VECTOR('',#110657,1.); +#110657 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110658 = ORIENTED_EDGE('',*,*,#110659,.T.); +#110659 = EDGE_CURVE('',#110652,#110604,#110660,.T.); +#110660 = LINE('',#110661,#110662); +#110661 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#110662 = VECTOR('',#110663,1.); +#110663 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110664 = FACE_BOUND('',#110665,.F.); +#110665 = EDGE_LOOP('',(#110666,#110676,#110684,#110692,#110700,#110708, + #110716,#110724)); +#110666 = ORIENTED_EDGE('',*,*,#110667,.F.); +#110667 = EDGE_CURVE('',#110668,#110670,#110672,.T.); +#110668 = VERTEX_POINT('',#110669); +#110669 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110670 = VERTEX_POINT('',#110671); +#110671 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#110672 = LINE('',#110673,#110674); +#110673 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110674 = VECTOR('',#110675,1.); +#110675 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110676 = ORIENTED_EDGE('',*,*,#110677,.T.); +#110677 = EDGE_CURVE('',#110668,#110678,#110680,.T.); +#110678 = VERTEX_POINT('',#110679); +#110679 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#110680 = LINE('',#110681,#110682); +#110681 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110682 = VECTOR('',#110683,1.); +#110683 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110684 = ORIENTED_EDGE('',*,*,#110685,.F.); +#110685 = EDGE_CURVE('',#110686,#110678,#110688,.T.); +#110686 = VERTEX_POINT('',#110687); +#110687 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#110688 = LINE('',#110689,#110690); +#110689 = CARTESIAN_POINT('',(-0.1,-5.715,0.2)); +#110690 = VECTOR('',#110691,1.); +#110691 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110692 = ORIENTED_EDGE('',*,*,#110693,.T.); +#110693 = EDGE_CURVE('',#110686,#110694,#110696,.T.); +#110694 = VERTEX_POINT('',#110695); +#110695 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#110696 = LINE('',#110697,#110698); +#110697 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110698 = VECTOR('',#110699,1.); +#110699 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110700 = ORIENTED_EDGE('',*,*,#110701,.T.); +#110701 = EDGE_CURVE('',#110694,#110702,#110704,.T.); +#110702 = VERTEX_POINT('',#110703); +#110703 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#110704 = LINE('',#110705,#110706); +#110705 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#110706 = VECTOR('',#110707,1.); +#110707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110708 = ORIENTED_EDGE('',*,*,#110709,.T.); +#110709 = EDGE_CURVE('',#110702,#110710,#110712,.T.); +#110710 = VERTEX_POINT('',#110711); +#110711 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#110712 = LINE('',#110713,#110714); +#110713 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#110714 = VECTOR('',#110715,1.); +#110715 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110716 = ORIENTED_EDGE('',*,*,#110717,.T.); +#110717 = EDGE_CURVE('',#110710,#110718,#110720,.T.); +#110718 = VERTEX_POINT('',#110719); +#110719 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#110720 = LINE('',#110721,#110722); +#110721 = CARTESIAN_POINT('',(0.1,-5.715,0.2)); +#110722 = VECTOR('',#110723,1.); +#110723 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110724 = ORIENTED_EDGE('',*,*,#110725,.T.); +#110725 = EDGE_CURVE('',#110718,#110670,#110726,.T.); +#110726 = LINE('',#110727,#110728); +#110727 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#110728 = VECTOR('',#110729,1.); +#110729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110730 = FACE_BOUND('',#110731,.F.); +#110731 = EDGE_LOOP('',(#110732,#110742,#110750,#110758,#110766,#110774, + #110782,#110790)); +#110732 = ORIENTED_EDGE('',*,*,#110733,.F.); +#110733 = EDGE_CURVE('',#110734,#110736,#110738,.T.); +#110734 = VERTEX_POINT('',#110735); +#110735 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110736 = VERTEX_POINT('',#110737); +#110737 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#110738 = LINE('',#110739,#110740); +#110739 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110740 = VECTOR('',#110741,1.); +#110741 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110742 = ORIENTED_EDGE('',*,*,#110743,.T.); +#110743 = EDGE_CURVE('',#110734,#110744,#110746,.T.); +#110744 = VERTEX_POINT('',#110745); +#110745 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#110746 = LINE('',#110747,#110748); +#110747 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110748 = VECTOR('',#110749,1.); +#110749 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110750 = ORIENTED_EDGE('',*,*,#110751,.F.); +#110751 = EDGE_CURVE('',#110752,#110744,#110754,.T.); +#110752 = VERTEX_POINT('',#110753); +#110753 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#110754 = LINE('',#110755,#110756); +#110755 = CARTESIAN_POINT('',(-0.1,-4.445,0.2)); +#110756 = VECTOR('',#110757,1.); +#110757 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110758 = ORIENTED_EDGE('',*,*,#110759,.T.); +#110759 = EDGE_CURVE('',#110752,#110760,#110762,.T.); +#110760 = VERTEX_POINT('',#110761); +#110761 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#110762 = LINE('',#110763,#110764); +#110763 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110764 = VECTOR('',#110765,1.); +#110765 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110766 = ORIENTED_EDGE('',*,*,#110767,.T.); +#110767 = EDGE_CURVE('',#110760,#110768,#110770,.T.); +#110768 = VERTEX_POINT('',#110769); +#110769 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#110770 = LINE('',#110771,#110772); +#110771 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#110772 = VECTOR('',#110773,1.); +#110773 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110774 = ORIENTED_EDGE('',*,*,#110775,.T.); +#110775 = EDGE_CURVE('',#110768,#110776,#110778,.T.); +#110776 = VERTEX_POINT('',#110777); +#110777 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#110778 = LINE('',#110779,#110780); +#110779 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#110780 = VECTOR('',#110781,1.); +#110781 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110782 = ORIENTED_EDGE('',*,*,#110783,.T.); +#110783 = EDGE_CURVE('',#110776,#110784,#110786,.T.); +#110784 = VERTEX_POINT('',#110785); +#110785 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#110786 = LINE('',#110787,#110788); +#110787 = CARTESIAN_POINT('',(0.1,-4.445,0.2)); +#110788 = VECTOR('',#110789,1.); +#110789 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110790 = ORIENTED_EDGE('',*,*,#110791,.T.); +#110791 = EDGE_CURVE('',#110784,#110736,#110792,.T.); +#110792 = LINE('',#110793,#110794); +#110793 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#110794 = VECTOR('',#110795,1.); +#110795 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110796 = FACE_BOUND('',#110797,.F.); +#110797 = EDGE_LOOP('',(#110798,#110808,#110816,#110824,#110832,#110840, + #110848,#110856)); +#110798 = ORIENTED_EDGE('',*,*,#110799,.F.); +#110799 = EDGE_CURVE('',#110800,#110802,#110804,.T.); +#110800 = VERTEX_POINT('',#110801); +#110801 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110802 = VERTEX_POINT('',#110803); +#110803 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#110804 = LINE('',#110805,#110806); +#110805 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110806 = VECTOR('',#110807,1.); +#110807 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110808 = ORIENTED_EDGE('',*,*,#110809,.T.); +#110809 = EDGE_CURVE('',#110800,#110810,#110812,.T.); +#110810 = VERTEX_POINT('',#110811); +#110811 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#110812 = LINE('',#110813,#110814); +#110813 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110814 = VECTOR('',#110815,1.); +#110815 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110816 = ORIENTED_EDGE('',*,*,#110817,.F.); +#110817 = EDGE_CURVE('',#110818,#110810,#110820,.T.); +#110818 = VERTEX_POINT('',#110819); +#110819 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#110820 = LINE('',#110821,#110822); +#110821 = CARTESIAN_POINT('',(-0.1,-3.175,0.2)); +#110822 = VECTOR('',#110823,1.); +#110823 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110824 = ORIENTED_EDGE('',*,*,#110825,.T.); +#110825 = EDGE_CURVE('',#110818,#110826,#110828,.T.); +#110826 = VERTEX_POINT('',#110827); +#110827 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#110828 = LINE('',#110829,#110830); +#110829 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110830 = VECTOR('',#110831,1.); +#110831 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110832 = ORIENTED_EDGE('',*,*,#110833,.T.); +#110833 = EDGE_CURVE('',#110826,#110834,#110836,.T.); +#110834 = VERTEX_POINT('',#110835); +#110835 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#110836 = LINE('',#110837,#110838); +#110837 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#110838 = VECTOR('',#110839,1.); +#110839 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110840 = ORIENTED_EDGE('',*,*,#110841,.T.); +#110841 = EDGE_CURVE('',#110834,#110842,#110844,.T.); +#110842 = VERTEX_POINT('',#110843); +#110843 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#110844 = LINE('',#110845,#110846); +#110845 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#110846 = VECTOR('',#110847,1.); +#110847 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110848 = ORIENTED_EDGE('',*,*,#110849,.T.); +#110849 = EDGE_CURVE('',#110842,#110850,#110852,.T.); +#110850 = VERTEX_POINT('',#110851); +#110851 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#110852 = LINE('',#110853,#110854); +#110853 = CARTESIAN_POINT('',(0.1,-3.175,0.2)); +#110854 = VECTOR('',#110855,1.); +#110855 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110856 = ORIENTED_EDGE('',*,*,#110857,.T.); +#110857 = EDGE_CURVE('',#110850,#110802,#110858,.T.); +#110858 = LINE('',#110859,#110860); +#110859 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#110860 = VECTOR('',#110861,1.); +#110861 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110862 = PLANE('',#110863); +#110863 = AXIS2_PLACEMENT_3D('',#110864,#110865,#110866); +#110864 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,0.2)); +#110865 = DIRECTION('',(0.,0.,1.)); +#110866 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110867 = ADVANCED_FACE('',(#110868),#110874,.T.); +#110868 = FACE_BOUND('',#110869,.T.); +#110869 = EDGE_LOOP('',(#110870,#110871,#110872,#110873)); +#110870 = ORIENTED_EDGE('',*,*,#110088,.T.); +#110871 = ORIENTED_EDGE('',*,*,#110458,.T.); +#110872 = ORIENTED_EDGE('',*,*,#110167,.F.); +#110873 = ORIENTED_EDGE('',*,*,#110184,.F.); +#110874 = PLANE('',#110875); +#110875 = AXIS2_PLACEMENT_3D('',#110876,#110877,#110878); +#110876 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110877 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110878 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110879 = ADVANCED_FACE('',(#110880),#110886,.F.); +#110880 = FACE_BOUND('',#110881,.F.); +#110881 = EDGE_LOOP('',(#110882,#110883,#110884,#110885)); +#110882 = ORIENTED_EDGE('',*,*,#110135,.T.); +#110883 = ORIENTED_EDGE('',*,*,#110200,.T.); +#110884 = ORIENTED_EDGE('',*,*,#110065,.F.); +#110885 = ORIENTED_EDGE('',*,*,#110427,.F.); +#110886 = PLANE('',#110887); +#110887 = AXIS2_PLACEMENT_3D('',#110888,#110889,#110890); +#110888 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110889 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110890 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110891 = ADVANCED_FACE('',(#110892),#110917,.T.); +#110892 = FACE_BOUND('',#110893,.T.); +#110893 = EDGE_LOOP('',(#110894,#110902,#110903,#110911)); +#110894 = ORIENTED_EDGE('',*,*,#110895,.F.); +#110895 = EDGE_CURVE('',#110210,#110896,#110898,.T.); +#110896 = VERTEX_POINT('',#110897); +#110897 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#110898 = LINE('',#110899,#110900); +#110899 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#110900 = VECTOR('',#110901,1.); +#110901 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#110902 = ORIENTED_EDGE('',*,*,#110209,.T.); +#110903 = ORIENTED_EDGE('',*,*,#110904,.T.); +#110904 = EDGE_CURVE('',#110212,#110905,#110907,.T.); +#110905 = VERTEX_POINT('',#110906); +#110906 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#110907 = LINE('',#110908,#110909); +#110908 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#110909 = VECTOR('',#110910,1.); +#110910 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#110911 = ORIENTED_EDGE('',*,*,#110912,.F.); +#110912 = EDGE_CURVE('',#110896,#110905,#110913,.T.); +#110913 = LINE('',#110914,#110915); +#110914 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#110915 = VECTOR('',#110916,1.); +#110916 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110917 = PLANE('',#110918); +#110918 = AXIS2_PLACEMENT_3D('',#110919,#110920,#110921); +#110919 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#110920 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#110921 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#110922 = ADVANCED_FACE('',(#110923),#110941,.T.); +#110923 = FACE_BOUND('',#110924,.T.); +#110924 = EDGE_LOOP('',(#110925,#110926,#110927,#110935)); +#110925 = ORIENTED_EDGE('',*,*,#110904,.F.); +#110926 = ORIENTED_EDGE('',*,*,#110235,.T.); +#110927 = ORIENTED_EDGE('',*,*,#110928,.T.); +#110928 = EDGE_CURVE('',#110228,#110929,#110931,.T.); +#110929 = VERTEX_POINT('',#110930); +#110930 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#110931 = LINE('',#110932,#110933); +#110932 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#110933 = VECTOR('',#110934,1.); +#110934 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#110935 = ORIENTED_EDGE('',*,*,#110936,.F.); +#110936 = EDGE_CURVE('',#110905,#110929,#110937,.T.); +#110937 = LINE('',#110938,#110939); +#110938 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#110939 = VECTOR('',#110940,1.); +#110940 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110941 = PLANE('',#110942); +#110942 = AXIS2_PLACEMENT_3D('',#110943,#110944,#110945); +#110943 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#110944 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#110945 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#110946 = ADVANCED_FACE('',(#110947),#110965,.T.); +#110947 = FACE_BOUND('',#110948,.T.); +#110948 = EDGE_LOOP('',(#110949,#110950,#110951,#110959)); +#110949 = ORIENTED_EDGE('',*,*,#110928,.F.); +#110950 = ORIENTED_EDGE('',*,*,#110227,.T.); +#110951 = ORIENTED_EDGE('',*,*,#110952,.T.); +#110952 = EDGE_CURVE('',#110220,#110953,#110955,.T.); +#110953 = VERTEX_POINT('',#110954); +#110954 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#110955 = LINE('',#110956,#110957); +#110956 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#110957 = VECTOR('',#110958,1.); +#110958 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#110959 = ORIENTED_EDGE('',*,*,#110960,.F.); +#110960 = EDGE_CURVE('',#110929,#110953,#110961,.T.); +#110961 = LINE('',#110962,#110963); +#110962 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#110963 = VECTOR('',#110964,1.); +#110964 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110965 = PLANE('',#110966); +#110966 = AXIS2_PLACEMENT_3D('',#110967,#110968,#110969); +#110967 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#110968 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#110969 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#110970 = ADVANCED_FACE('',(#110971),#110982,.T.); +#110971 = FACE_BOUND('',#110972,.T.); +#110972 = EDGE_LOOP('',(#110973,#110974,#110975,#110976)); +#110973 = ORIENTED_EDGE('',*,*,#110952,.F.); +#110974 = ORIENTED_EDGE('',*,*,#110219,.T.); +#110975 = ORIENTED_EDGE('',*,*,#110895,.T.); +#110976 = ORIENTED_EDGE('',*,*,#110977,.F.); +#110977 = EDGE_CURVE('',#110953,#110896,#110978,.T.); +#110978 = LINE('',#110979,#110980); +#110979 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#110980 = VECTOR('',#110981,1.); +#110981 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110982 = PLANE('',#110983); +#110983 = AXIS2_PLACEMENT_3D('',#110984,#110985,#110986); +#110984 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#110985 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#110986 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#110987 = ADVANCED_FACE('',(#110988),#111013,.T.); +#110988 = FACE_BOUND('',#110989,.T.); +#110989 = EDGE_LOOP('',(#110990,#110998,#110999,#111007)); +#110990 = ORIENTED_EDGE('',*,*,#110991,.F.); +#110991 = EDGE_CURVE('',#110244,#110992,#110994,.T.); +#110992 = VERTEX_POINT('',#110993); +#110993 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#110994 = LINE('',#110995,#110996); +#110995 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#110996 = VECTOR('',#110997,1.); +#110997 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#110998 = ORIENTED_EDGE('',*,*,#110243,.T.); +#110999 = ORIENTED_EDGE('',*,*,#111000,.T.); +#111000 = EDGE_CURVE('',#110246,#111001,#111003,.T.); +#111001 = VERTEX_POINT('',#111002); +#111002 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#111003 = LINE('',#111004,#111005); +#111004 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#111005 = VECTOR('',#111006,1.); +#111006 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111007 = ORIENTED_EDGE('',*,*,#111008,.F.); +#111008 = EDGE_CURVE('',#110992,#111001,#111009,.T.); +#111009 = LINE('',#111010,#111011); +#111010 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#111011 = VECTOR('',#111012,1.); +#111012 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111013 = PLANE('',#111014); +#111014 = AXIS2_PLACEMENT_3D('',#111015,#111016,#111017); +#111015 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#111016 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111017 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111018 = ADVANCED_FACE('',(#111019),#111037,.T.); +#111019 = FACE_BOUND('',#111020,.T.); +#111020 = EDGE_LOOP('',(#111021,#111022,#111023,#111031)); +#111021 = ORIENTED_EDGE('',*,*,#111000,.F.); +#111022 = ORIENTED_EDGE('',*,*,#110269,.T.); +#111023 = ORIENTED_EDGE('',*,*,#111024,.T.); +#111024 = EDGE_CURVE('',#110262,#111025,#111027,.T.); +#111025 = VERTEX_POINT('',#111026); +#111026 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#111027 = LINE('',#111028,#111029); +#111028 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#111029 = VECTOR('',#111030,1.); +#111030 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111031 = ORIENTED_EDGE('',*,*,#111032,.F.); +#111032 = EDGE_CURVE('',#111001,#111025,#111033,.T.); +#111033 = LINE('',#111034,#111035); +#111034 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#111035 = VECTOR('',#111036,1.); +#111036 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111037 = PLANE('',#111038); +#111038 = AXIS2_PLACEMENT_3D('',#111039,#111040,#111041); +#111039 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#111040 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111041 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111042 = ADVANCED_FACE('',(#111043),#111061,.T.); +#111043 = FACE_BOUND('',#111044,.T.); +#111044 = EDGE_LOOP('',(#111045,#111046,#111047,#111055)); +#111045 = ORIENTED_EDGE('',*,*,#111024,.F.); +#111046 = ORIENTED_EDGE('',*,*,#110261,.T.); +#111047 = ORIENTED_EDGE('',*,*,#111048,.T.); +#111048 = EDGE_CURVE('',#110254,#111049,#111051,.T.); +#111049 = VERTEX_POINT('',#111050); +#111050 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#111051 = LINE('',#111052,#111053); +#111052 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#111053 = VECTOR('',#111054,1.); +#111054 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111055 = ORIENTED_EDGE('',*,*,#111056,.F.); +#111056 = EDGE_CURVE('',#111025,#111049,#111057,.T.); +#111057 = LINE('',#111058,#111059); +#111058 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#111059 = VECTOR('',#111060,1.); +#111060 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111061 = PLANE('',#111062); +#111062 = AXIS2_PLACEMENT_3D('',#111063,#111064,#111065); +#111063 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#111064 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111065 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111066 = ADVANCED_FACE('',(#111067),#111078,.T.); +#111067 = FACE_BOUND('',#111068,.T.); +#111068 = EDGE_LOOP('',(#111069,#111070,#111071,#111072)); +#111069 = ORIENTED_EDGE('',*,*,#111048,.F.); +#111070 = ORIENTED_EDGE('',*,*,#110253,.T.); +#111071 = ORIENTED_EDGE('',*,*,#110991,.T.); +#111072 = ORIENTED_EDGE('',*,*,#111073,.F.); +#111073 = EDGE_CURVE('',#111049,#110992,#111074,.T.); +#111074 = LINE('',#111075,#111076); +#111075 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#111076 = VECTOR('',#111077,1.); +#111077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111078 = PLANE('',#111079); +#111079 = AXIS2_PLACEMENT_3D('',#111080,#111081,#111082); +#111080 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#111081 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111082 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111083 = ADVANCED_FACE('',(#111084),#111109,.T.); +#111084 = FACE_BOUND('',#111085,.T.); +#111085 = EDGE_LOOP('',(#111086,#111094,#111095,#111103)); +#111086 = ORIENTED_EDGE('',*,*,#111087,.F.); +#111087 = EDGE_CURVE('',#110278,#111088,#111090,.T.); +#111088 = VERTEX_POINT('',#111089); +#111089 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#111090 = LINE('',#111091,#111092); +#111091 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#111092 = VECTOR('',#111093,1.); +#111093 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111094 = ORIENTED_EDGE('',*,*,#110277,.T.); +#111095 = ORIENTED_EDGE('',*,*,#111096,.T.); +#111096 = EDGE_CURVE('',#110280,#111097,#111099,.T.); +#111097 = VERTEX_POINT('',#111098); +#111098 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#111099 = LINE('',#111100,#111101); +#111100 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#111101 = VECTOR('',#111102,1.); +#111102 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111103 = ORIENTED_EDGE('',*,*,#111104,.F.); +#111104 = EDGE_CURVE('',#111088,#111097,#111105,.T.); +#111105 = LINE('',#111106,#111107); +#111106 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#111107 = VECTOR('',#111108,1.); +#111108 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111109 = PLANE('',#111110); +#111110 = AXIS2_PLACEMENT_3D('',#111111,#111112,#111113); +#111111 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#111112 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111113 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111114 = ADVANCED_FACE('',(#111115),#111133,.T.); +#111115 = FACE_BOUND('',#111116,.T.); +#111116 = EDGE_LOOP('',(#111117,#111118,#111119,#111127)); +#111117 = ORIENTED_EDGE('',*,*,#111096,.F.); +#111118 = ORIENTED_EDGE('',*,*,#110303,.T.); +#111119 = ORIENTED_EDGE('',*,*,#111120,.T.); +#111120 = EDGE_CURVE('',#110296,#111121,#111123,.T.); +#111121 = VERTEX_POINT('',#111122); +#111122 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#111123 = LINE('',#111124,#111125); +#111124 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#111125 = VECTOR('',#111126,1.); +#111126 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111127 = ORIENTED_EDGE('',*,*,#111128,.F.); +#111128 = EDGE_CURVE('',#111097,#111121,#111129,.T.); +#111129 = LINE('',#111130,#111131); +#111130 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#111131 = VECTOR('',#111132,1.); +#111132 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111133 = PLANE('',#111134); +#111134 = AXIS2_PLACEMENT_3D('',#111135,#111136,#111137); +#111135 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#111136 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111137 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111138 = ADVANCED_FACE('',(#111139),#111157,.T.); +#111139 = FACE_BOUND('',#111140,.T.); +#111140 = EDGE_LOOP('',(#111141,#111142,#111143,#111151)); +#111141 = ORIENTED_EDGE('',*,*,#111120,.F.); +#111142 = ORIENTED_EDGE('',*,*,#110295,.T.); +#111143 = ORIENTED_EDGE('',*,*,#111144,.T.); +#111144 = EDGE_CURVE('',#110288,#111145,#111147,.T.); +#111145 = VERTEX_POINT('',#111146); +#111146 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#111147 = LINE('',#111148,#111149); +#111148 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#111149 = VECTOR('',#111150,1.); +#111150 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111151 = ORIENTED_EDGE('',*,*,#111152,.F.); +#111152 = EDGE_CURVE('',#111121,#111145,#111153,.T.); +#111153 = LINE('',#111154,#111155); +#111154 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#111155 = VECTOR('',#111156,1.); +#111156 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111157 = PLANE('',#111158); +#111158 = AXIS2_PLACEMENT_3D('',#111159,#111160,#111161); +#111159 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#111160 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111161 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111162 = ADVANCED_FACE('',(#111163),#111174,.T.); +#111163 = FACE_BOUND('',#111164,.T.); +#111164 = EDGE_LOOP('',(#111165,#111166,#111167,#111168)); +#111165 = ORIENTED_EDGE('',*,*,#111144,.F.); +#111166 = ORIENTED_EDGE('',*,*,#110287,.T.); +#111167 = ORIENTED_EDGE('',*,*,#111087,.T.); +#111168 = ORIENTED_EDGE('',*,*,#111169,.F.); +#111169 = EDGE_CURVE('',#111145,#111088,#111170,.T.); +#111170 = LINE('',#111171,#111172); +#111171 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#111172 = VECTOR('',#111173,1.); +#111173 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111174 = PLANE('',#111175); +#111175 = AXIS2_PLACEMENT_3D('',#111176,#111177,#111178); +#111176 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#111177 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111178 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111179 = ADVANCED_FACE('',(#111180),#111205,.T.); +#111180 = FACE_BOUND('',#111181,.T.); +#111181 = EDGE_LOOP('',(#111182,#111190,#111191,#111199)); +#111182 = ORIENTED_EDGE('',*,*,#111183,.F.); +#111183 = EDGE_CURVE('',#110312,#111184,#111186,.T.); +#111184 = VERTEX_POINT('',#111185); +#111185 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#111186 = LINE('',#111187,#111188); +#111187 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#111188 = VECTOR('',#111189,1.); +#111189 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111190 = ORIENTED_EDGE('',*,*,#110311,.T.); +#111191 = ORIENTED_EDGE('',*,*,#111192,.T.); +#111192 = EDGE_CURVE('',#110314,#111193,#111195,.T.); +#111193 = VERTEX_POINT('',#111194); +#111194 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#111195 = LINE('',#111196,#111197); +#111196 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#111197 = VECTOR('',#111198,1.); +#111198 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111199 = ORIENTED_EDGE('',*,*,#111200,.F.); +#111200 = EDGE_CURVE('',#111184,#111193,#111201,.T.); +#111201 = LINE('',#111202,#111203); +#111202 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#111203 = VECTOR('',#111204,1.); +#111204 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111205 = PLANE('',#111206); +#111206 = AXIS2_PLACEMENT_3D('',#111207,#111208,#111209); +#111207 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#111208 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111209 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111210 = ADVANCED_FACE('',(#111211),#111229,.T.); +#111211 = FACE_BOUND('',#111212,.T.); +#111212 = EDGE_LOOP('',(#111213,#111214,#111215,#111223)); +#111213 = ORIENTED_EDGE('',*,*,#111192,.F.); +#111214 = ORIENTED_EDGE('',*,*,#110337,.T.); +#111215 = ORIENTED_EDGE('',*,*,#111216,.T.); +#111216 = EDGE_CURVE('',#110330,#111217,#111219,.T.); +#111217 = VERTEX_POINT('',#111218); +#111218 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#111219 = LINE('',#111220,#111221); +#111220 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#111221 = VECTOR('',#111222,1.); +#111222 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111223 = ORIENTED_EDGE('',*,*,#111224,.F.); +#111224 = EDGE_CURVE('',#111193,#111217,#111225,.T.); +#111225 = LINE('',#111226,#111227); +#111226 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#111227 = VECTOR('',#111228,1.); +#111228 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111229 = PLANE('',#111230); +#111230 = AXIS2_PLACEMENT_3D('',#111231,#111232,#111233); +#111231 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#111232 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111233 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111234 = ADVANCED_FACE('',(#111235),#111253,.T.); +#111235 = FACE_BOUND('',#111236,.T.); +#111236 = EDGE_LOOP('',(#111237,#111238,#111239,#111247)); +#111237 = ORIENTED_EDGE('',*,*,#111216,.F.); +#111238 = ORIENTED_EDGE('',*,*,#110329,.T.); +#111239 = ORIENTED_EDGE('',*,*,#111240,.T.); +#111240 = EDGE_CURVE('',#110322,#111241,#111243,.T.); +#111241 = VERTEX_POINT('',#111242); +#111242 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#111243 = LINE('',#111244,#111245); +#111244 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#111245 = VECTOR('',#111246,1.); +#111246 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111247 = ORIENTED_EDGE('',*,*,#111248,.F.); +#111248 = EDGE_CURVE('',#111217,#111241,#111249,.T.); +#111249 = LINE('',#111250,#111251); +#111250 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#111251 = VECTOR('',#111252,1.); +#111252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111253 = PLANE('',#111254); +#111254 = AXIS2_PLACEMENT_3D('',#111255,#111256,#111257); +#111255 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#111256 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111257 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111258 = ADVANCED_FACE('',(#111259),#111270,.T.); +#111259 = FACE_BOUND('',#111260,.T.); +#111260 = EDGE_LOOP('',(#111261,#111262,#111263,#111264)); +#111261 = ORIENTED_EDGE('',*,*,#111240,.F.); +#111262 = ORIENTED_EDGE('',*,*,#110321,.T.); +#111263 = ORIENTED_EDGE('',*,*,#111183,.T.); +#111264 = ORIENTED_EDGE('',*,*,#111265,.F.); +#111265 = EDGE_CURVE('',#111241,#111184,#111266,.T.); +#111266 = LINE('',#111267,#111268); +#111267 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#111268 = VECTOR('',#111269,1.); +#111269 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111270 = PLANE('',#111271); +#111271 = AXIS2_PLACEMENT_3D('',#111272,#111273,#111274); +#111272 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#111273 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111274 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111275 = ADVANCED_FACE('',(#111276),#111301,.T.); +#111276 = FACE_BOUND('',#111277,.T.); +#111277 = EDGE_LOOP('',(#111278,#111286,#111287,#111295)); +#111278 = ORIENTED_EDGE('',*,*,#111279,.F.); +#111279 = EDGE_CURVE('',#110346,#111280,#111282,.T.); +#111280 = VERTEX_POINT('',#111281); +#111281 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#111282 = LINE('',#111283,#111284); +#111283 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#111284 = VECTOR('',#111285,1.); +#111285 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111286 = ORIENTED_EDGE('',*,*,#110345,.T.); +#111287 = ORIENTED_EDGE('',*,*,#111288,.T.); +#111288 = EDGE_CURVE('',#110348,#111289,#111291,.T.); +#111289 = VERTEX_POINT('',#111290); +#111290 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#111291 = LINE('',#111292,#111293); +#111292 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#111293 = VECTOR('',#111294,1.); +#111294 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111295 = ORIENTED_EDGE('',*,*,#111296,.F.); +#111296 = EDGE_CURVE('',#111280,#111289,#111297,.T.); +#111297 = LINE('',#111298,#111299); +#111298 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#111299 = VECTOR('',#111300,1.); +#111300 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111301 = PLANE('',#111302); +#111302 = AXIS2_PLACEMENT_3D('',#111303,#111304,#111305); +#111303 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#111304 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111305 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111306 = ADVANCED_FACE('',(#111307),#111325,.T.); +#111307 = FACE_BOUND('',#111308,.T.); +#111308 = EDGE_LOOP('',(#111309,#111310,#111311,#111319)); +#111309 = ORIENTED_EDGE('',*,*,#111288,.F.); +#111310 = ORIENTED_EDGE('',*,*,#110371,.T.); +#111311 = ORIENTED_EDGE('',*,*,#111312,.T.); +#111312 = EDGE_CURVE('',#110364,#111313,#111315,.T.); +#111313 = VERTEX_POINT('',#111314); +#111314 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#111315 = LINE('',#111316,#111317); +#111316 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#111317 = VECTOR('',#111318,1.); +#111318 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111319 = ORIENTED_EDGE('',*,*,#111320,.F.); +#111320 = EDGE_CURVE('',#111289,#111313,#111321,.T.); +#111321 = LINE('',#111322,#111323); +#111322 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#111323 = VECTOR('',#111324,1.); +#111324 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111325 = PLANE('',#111326); +#111326 = AXIS2_PLACEMENT_3D('',#111327,#111328,#111329); +#111327 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#111328 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111329 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111330 = ADVANCED_FACE('',(#111331),#111349,.T.); +#111331 = FACE_BOUND('',#111332,.T.); +#111332 = EDGE_LOOP('',(#111333,#111334,#111335,#111343)); +#111333 = ORIENTED_EDGE('',*,*,#111312,.F.); +#111334 = ORIENTED_EDGE('',*,*,#110363,.T.); +#111335 = ORIENTED_EDGE('',*,*,#111336,.T.); +#111336 = EDGE_CURVE('',#110356,#111337,#111339,.T.); +#111337 = VERTEX_POINT('',#111338); +#111338 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#111339 = LINE('',#111340,#111341); +#111340 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#111341 = VECTOR('',#111342,1.); +#111342 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111343 = ORIENTED_EDGE('',*,*,#111344,.F.); +#111344 = EDGE_CURVE('',#111313,#111337,#111345,.T.); +#111345 = LINE('',#111346,#111347); +#111346 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#111347 = VECTOR('',#111348,1.); +#111348 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111349 = PLANE('',#111350); +#111350 = AXIS2_PLACEMENT_3D('',#111351,#111352,#111353); +#111351 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#111352 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111353 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111354 = ADVANCED_FACE('',(#111355),#111366,.T.); +#111355 = FACE_BOUND('',#111356,.T.); +#111356 = EDGE_LOOP('',(#111357,#111358,#111359,#111360)); +#111357 = ORIENTED_EDGE('',*,*,#111336,.F.); +#111358 = ORIENTED_EDGE('',*,*,#110355,.T.); +#111359 = ORIENTED_EDGE('',*,*,#111279,.T.); +#111360 = ORIENTED_EDGE('',*,*,#111361,.F.); +#111361 = EDGE_CURVE('',#111337,#111280,#111362,.T.); +#111362 = LINE('',#111363,#111364); +#111363 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#111364 = VECTOR('',#111365,1.); +#111365 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111366 = PLANE('',#111367); +#111367 = AXIS2_PLACEMENT_3D('',#111368,#111369,#111370); +#111368 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#111369 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111370 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111371 = ADVANCED_FACE('',(#111372),#111397,.T.); +#111372 = FACE_BOUND('',#111373,.T.); +#111373 = EDGE_LOOP('',(#111374,#111382,#111383,#111391)); +#111374 = ORIENTED_EDGE('',*,*,#111375,.F.); +#111375 = EDGE_CURVE('',#110380,#111376,#111378,.T.); +#111376 = VERTEX_POINT('',#111377); +#111377 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#111378 = LINE('',#111379,#111380); +#111379 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#111380 = VECTOR('',#111381,1.); +#111381 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111382 = ORIENTED_EDGE('',*,*,#110379,.T.); +#111383 = ORIENTED_EDGE('',*,*,#111384,.T.); +#111384 = EDGE_CURVE('',#110382,#111385,#111387,.T.); +#111385 = VERTEX_POINT('',#111386); +#111386 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#111387 = LINE('',#111388,#111389); +#111388 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#111389 = VECTOR('',#111390,1.); +#111390 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111391 = ORIENTED_EDGE('',*,*,#111392,.F.); +#111392 = EDGE_CURVE('',#111376,#111385,#111393,.T.); +#111393 = LINE('',#111394,#111395); +#111394 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#111395 = VECTOR('',#111396,1.); +#111396 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111397 = PLANE('',#111398); +#111398 = AXIS2_PLACEMENT_3D('',#111399,#111400,#111401); +#111399 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#111400 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111401 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111402 = ADVANCED_FACE('',(#111403),#111421,.T.); +#111403 = FACE_BOUND('',#111404,.T.); +#111404 = EDGE_LOOP('',(#111405,#111406,#111407,#111415)); +#111405 = ORIENTED_EDGE('',*,*,#111384,.F.); +#111406 = ORIENTED_EDGE('',*,*,#110405,.T.); +#111407 = ORIENTED_EDGE('',*,*,#111408,.T.); +#111408 = EDGE_CURVE('',#110398,#111409,#111411,.T.); +#111409 = VERTEX_POINT('',#111410); +#111410 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#111411 = LINE('',#111412,#111413); +#111412 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#111413 = VECTOR('',#111414,1.); +#111414 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111415 = ORIENTED_EDGE('',*,*,#111416,.F.); +#111416 = EDGE_CURVE('',#111385,#111409,#111417,.T.); +#111417 = LINE('',#111418,#111419); +#111418 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#111419 = VECTOR('',#111420,1.); +#111420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111421 = PLANE('',#111422); +#111422 = AXIS2_PLACEMENT_3D('',#111423,#111424,#111425); +#111423 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#111424 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111425 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111426 = ADVANCED_FACE('',(#111427),#111445,.T.); +#111427 = FACE_BOUND('',#111428,.T.); +#111428 = EDGE_LOOP('',(#111429,#111430,#111431,#111439)); +#111429 = ORIENTED_EDGE('',*,*,#111408,.F.); +#111430 = ORIENTED_EDGE('',*,*,#110397,.T.); +#111431 = ORIENTED_EDGE('',*,*,#111432,.T.); +#111432 = EDGE_CURVE('',#110390,#111433,#111435,.T.); +#111433 = VERTEX_POINT('',#111434); +#111434 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#111435 = LINE('',#111436,#111437); +#111436 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#111437 = VECTOR('',#111438,1.); +#111438 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111439 = ORIENTED_EDGE('',*,*,#111440,.F.); +#111440 = EDGE_CURVE('',#111409,#111433,#111441,.T.); +#111441 = LINE('',#111442,#111443); +#111442 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#111443 = VECTOR('',#111444,1.); +#111444 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111445 = PLANE('',#111446); +#111446 = AXIS2_PLACEMENT_3D('',#111447,#111448,#111449); +#111447 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#111448 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111449 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111450 = ADVANCED_FACE('',(#111451),#111462,.T.); +#111451 = FACE_BOUND('',#111452,.T.); +#111452 = EDGE_LOOP('',(#111453,#111454,#111455,#111456)); +#111453 = ORIENTED_EDGE('',*,*,#111432,.F.); +#111454 = ORIENTED_EDGE('',*,*,#110389,.T.); +#111455 = ORIENTED_EDGE('',*,*,#111375,.T.); +#111456 = ORIENTED_EDGE('',*,*,#111457,.F.); +#111457 = EDGE_CURVE('',#111433,#111376,#111458,.T.); +#111458 = LINE('',#111459,#111460); +#111459 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#111460 = VECTOR('',#111461,1.); +#111461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111462 = PLANE('',#111463); +#111463 = AXIS2_PLACEMENT_3D('',#111464,#111465,#111466); +#111464 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#111465 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111466 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111467 = ADVANCED_FACE('',(#111468),#111479,.T.); +#111468 = FACE_BOUND('',#111469,.T.); +#111469 = EDGE_LOOP('',(#111470,#111471,#111472,#111478)); +#111470 = ORIENTED_EDGE('',*,*,#110469,.F.); +#111471 = ORIENTED_EDGE('',*,*,#110479,.T.); +#111472 = ORIENTED_EDGE('',*,*,#111473,.T.); +#111473 = EDGE_CURVE('',#110480,#110520,#111474,.T.); +#111474 = LINE('',#111475,#111476); +#111475 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#111476 = VECTOR('',#111477,1.); +#111477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111478 = ORIENTED_EDGE('',*,*,#110527,.T.); +#111479 = PLANE('',#111480); +#111480 = AXIS2_PLACEMENT_3D('',#111481,#111482,#111483); +#111481 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#111482 = DIRECTION('',(0.,-0.,-1.)); +#111483 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111484 = ADVANCED_FACE('',(#111485),#111526,.F.); +#111485 = FACE_BOUND('',#111486,.F.); +#111486 = EDGE_LOOP('',(#111487,#111495,#111496,#111504,#111512,#111520) + ); +#111487 = ORIENTED_EDGE('',*,*,#111488,.T.); +#111488 = EDGE_CURVE('',#111489,#110520,#111491,.T.); +#111489 = VERTEX_POINT('',#111490); +#111490 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#111491 = LINE('',#111492,#111493); +#111492 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#111493 = VECTOR('',#111494,1.); +#111494 = DIRECTION('',(0.,0.,1.)); +#111495 = ORIENTED_EDGE('',*,*,#110519,.F.); +#111496 = ORIENTED_EDGE('',*,*,#111497,.T.); +#111497 = EDGE_CURVE('',#110512,#111498,#111500,.T.); +#111498 = VERTEX_POINT('',#111499); +#111499 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#111500 = LINE('',#111501,#111502); +#111501 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#111502 = VECTOR('',#111503,1.); +#111503 = DIRECTION('',(0.,0.,-1.)); +#111504 = ORIENTED_EDGE('',*,*,#111505,.T.); +#111505 = EDGE_CURVE('',#111498,#111506,#111508,.T.); +#111506 = VERTEX_POINT('',#111507); +#111507 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#111508 = LINE('',#111509,#111510); +#111509 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#111510 = VECTOR('',#111511,1.); +#111511 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111512 = ORIENTED_EDGE('',*,*,#111513,.T.); +#111513 = EDGE_CURVE('',#111506,#111514,#111516,.T.); +#111514 = VERTEX_POINT('',#111515); +#111515 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#111516 = LINE('',#111517,#111518); +#111517 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#111518 = VECTOR('',#111519,1.); +#111519 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111520 = ORIENTED_EDGE('',*,*,#111521,.T.); +#111521 = EDGE_CURVE('',#111514,#111489,#111522,.T.); +#111522 = LINE('',#111523,#111524); +#111523 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#111524 = VECTOR('',#111525,1.); +#111525 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111526 = PLANE('',#111527); +#111527 = AXIS2_PLACEMENT_3D('',#111528,#111529,#111530); +#111528 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#111529 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111530 = DIRECTION('',(0.,0.,1.)); +#111531 = ADVANCED_FACE('',(#111532),#111543,.T.); +#111532 = FACE_BOUND('',#111533,.T.); +#111533 = EDGE_LOOP('',(#111534,#111540,#111541,#111542)); +#111534 = ORIENTED_EDGE('',*,*,#111535,.F.); +#111535 = EDGE_CURVE('',#110488,#110512,#111536,.T.); +#111536 = LINE('',#111537,#111538); +#111537 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#111538 = VECTOR('',#111539,1.); +#111539 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111540 = ORIENTED_EDGE('',*,*,#110495,.T.); +#111541 = ORIENTED_EDGE('',*,*,#110503,.T.); +#111542 = ORIENTED_EDGE('',*,*,#110511,.T.); +#111543 = PLANE('',#111544); +#111544 = AXIS2_PLACEMENT_3D('',#111545,#111546,#111547); +#111545 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#111546 = DIRECTION('',(0.,-0.,-1.)); +#111547 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111548 = ADVANCED_FACE('',(#111549),#111590,.T.); +#111549 = FACE_BOUND('',#111550,.T.); +#111550 = EDGE_LOOP('',(#111551,#111559,#111560,#111568,#111576,#111584) + ); +#111551 = ORIENTED_EDGE('',*,*,#111552,.T.); +#111552 = EDGE_CURVE('',#111553,#110480,#111555,.T.); +#111553 = VERTEX_POINT('',#111554); +#111554 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#111555 = LINE('',#111556,#111557); +#111556 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#111557 = VECTOR('',#111558,1.); +#111558 = DIRECTION('',(0.,0.,1.)); +#111559 = ORIENTED_EDGE('',*,*,#110487,.F.); +#111560 = ORIENTED_EDGE('',*,*,#111561,.T.); +#111561 = EDGE_CURVE('',#110488,#111562,#111564,.T.); +#111562 = VERTEX_POINT('',#111563); +#111563 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#111564 = LINE('',#111565,#111566); +#111565 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#111566 = VECTOR('',#111567,1.); +#111567 = DIRECTION('',(0.,0.,-1.)); +#111568 = ORIENTED_EDGE('',*,*,#111569,.T.); +#111569 = EDGE_CURVE('',#111562,#111570,#111572,.T.); +#111570 = VERTEX_POINT('',#111571); +#111571 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#111572 = LINE('',#111573,#111574); +#111573 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#111574 = VECTOR('',#111575,1.); +#111575 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111576 = ORIENTED_EDGE('',*,*,#111577,.F.); +#111577 = EDGE_CURVE('',#111578,#111570,#111580,.T.); +#111578 = VERTEX_POINT('',#111579); +#111579 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#111580 = LINE('',#111581,#111582); +#111581 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#111582 = VECTOR('',#111583,1.); +#111583 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111584 = ORIENTED_EDGE('',*,*,#111585,.T.); +#111585 = EDGE_CURVE('',#111578,#111553,#111586,.T.); +#111586 = LINE('',#111587,#111588); +#111587 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#111588 = VECTOR('',#111589,1.); +#111589 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111590 = PLANE('',#111591); +#111591 = AXIS2_PLACEMENT_3D('',#111592,#111593,#111594); +#111592 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#111593 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111594 = DIRECTION('',(0.,0.,1.)); +#111595 = ADVANCED_FACE('',(#111596),#111607,.T.); +#111596 = FACE_BOUND('',#111597,.T.); +#111597 = EDGE_LOOP('',(#111598,#111599,#111600,#111606)); +#111598 = ORIENTED_EDGE('',*,*,#110535,.F.); +#111599 = ORIENTED_EDGE('',*,*,#110545,.T.); +#111600 = ORIENTED_EDGE('',*,*,#111601,.T.); +#111601 = EDGE_CURVE('',#110546,#110586,#111602,.T.); +#111602 = LINE('',#111603,#111604); +#111603 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#111604 = VECTOR('',#111605,1.); +#111605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111606 = ORIENTED_EDGE('',*,*,#110593,.T.); +#111607 = PLANE('',#111608); +#111608 = AXIS2_PLACEMENT_3D('',#111609,#111610,#111611); +#111609 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#111610 = DIRECTION('',(0.,-0.,-1.)); +#111611 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111612 = ADVANCED_FACE('',(#111613),#111654,.F.); +#111613 = FACE_BOUND('',#111614,.F.); +#111614 = EDGE_LOOP('',(#111615,#111623,#111624,#111632,#111640,#111648) + ); +#111615 = ORIENTED_EDGE('',*,*,#111616,.T.); +#111616 = EDGE_CURVE('',#111617,#110586,#111619,.T.); +#111617 = VERTEX_POINT('',#111618); +#111618 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#111619 = LINE('',#111620,#111621); +#111620 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#111621 = VECTOR('',#111622,1.); +#111622 = DIRECTION('',(0.,0.,1.)); +#111623 = ORIENTED_EDGE('',*,*,#110585,.F.); +#111624 = ORIENTED_EDGE('',*,*,#111625,.T.); +#111625 = EDGE_CURVE('',#110578,#111626,#111628,.T.); +#111626 = VERTEX_POINT('',#111627); +#111627 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#111628 = LINE('',#111629,#111630); +#111629 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#111630 = VECTOR('',#111631,1.); +#111631 = DIRECTION('',(0.,0.,-1.)); +#111632 = ORIENTED_EDGE('',*,*,#111633,.T.); +#111633 = EDGE_CURVE('',#111626,#111634,#111636,.T.); +#111634 = VERTEX_POINT('',#111635); +#111635 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#111636 = LINE('',#111637,#111638); +#111637 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#111638 = VECTOR('',#111639,1.); +#111639 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111640 = ORIENTED_EDGE('',*,*,#111641,.T.); +#111641 = EDGE_CURVE('',#111634,#111642,#111644,.T.); +#111642 = VERTEX_POINT('',#111643); +#111643 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#111644 = LINE('',#111645,#111646); +#111645 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#111646 = VECTOR('',#111647,1.); +#111647 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111648 = ORIENTED_EDGE('',*,*,#111649,.T.); +#111649 = EDGE_CURVE('',#111642,#111617,#111650,.T.); +#111650 = LINE('',#111651,#111652); +#111651 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#111652 = VECTOR('',#111653,1.); +#111653 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111654 = PLANE('',#111655); +#111655 = AXIS2_PLACEMENT_3D('',#111656,#111657,#111658); +#111656 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#111657 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111658 = DIRECTION('',(0.,0.,1.)); +#111659 = ADVANCED_FACE('',(#111660),#111671,.T.); +#111660 = FACE_BOUND('',#111661,.T.); +#111661 = EDGE_LOOP('',(#111662,#111668,#111669,#111670)); +#111662 = ORIENTED_EDGE('',*,*,#111663,.F.); +#111663 = EDGE_CURVE('',#110554,#110578,#111664,.T.); +#111664 = LINE('',#111665,#111666); +#111665 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#111666 = VECTOR('',#111667,1.); +#111667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111668 = ORIENTED_EDGE('',*,*,#110561,.T.); +#111669 = ORIENTED_EDGE('',*,*,#110569,.T.); +#111670 = ORIENTED_EDGE('',*,*,#110577,.T.); +#111671 = PLANE('',#111672); +#111672 = AXIS2_PLACEMENT_3D('',#111673,#111674,#111675); +#111673 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#111674 = DIRECTION('',(0.,-0.,-1.)); +#111675 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111676 = ADVANCED_FACE('',(#111677),#111718,.T.); +#111677 = FACE_BOUND('',#111678,.T.); +#111678 = EDGE_LOOP('',(#111679,#111687,#111688,#111696,#111704,#111712) + ); +#111679 = ORIENTED_EDGE('',*,*,#111680,.T.); +#111680 = EDGE_CURVE('',#111681,#110546,#111683,.T.); +#111681 = VERTEX_POINT('',#111682); +#111682 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#111683 = LINE('',#111684,#111685); +#111684 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#111685 = VECTOR('',#111686,1.); +#111686 = DIRECTION('',(0.,0.,1.)); +#111687 = ORIENTED_EDGE('',*,*,#110553,.F.); +#111688 = ORIENTED_EDGE('',*,*,#111689,.T.); +#111689 = EDGE_CURVE('',#110554,#111690,#111692,.T.); +#111690 = VERTEX_POINT('',#111691); +#111691 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#111692 = LINE('',#111693,#111694); +#111693 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#111694 = VECTOR('',#111695,1.); +#111695 = DIRECTION('',(0.,0.,-1.)); +#111696 = ORIENTED_EDGE('',*,*,#111697,.T.); +#111697 = EDGE_CURVE('',#111690,#111698,#111700,.T.); +#111698 = VERTEX_POINT('',#111699); +#111699 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#111700 = LINE('',#111701,#111702); +#111701 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#111702 = VECTOR('',#111703,1.); +#111703 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111704 = ORIENTED_EDGE('',*,*,#111705,.F.); +#111705 = EDGE_CURVE('',#111706,#111698,#111708,.T.); +#111706 = VERTEX_POINT('',#111707); +#111707 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#111708 = LINE('',#111709,#111710); +#111709 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#111710 = VECTOR('',#111711,1.); +#111711 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111712 = ORIENTED_EDGE('',*,*,#111713,.T.); +#111713 = EDGE_CURVE('',#111706,#111681,#111714,.T.); +#111714 = LINE('',#111715,#111716); +#111715 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#111716 = VECTOR('',#111717,1.); +#111717 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111718 = PLANE('',#111719); +#111719 = AXIS2_PLACEMENT_3D('',#111720,#111721,#111722); +#111720 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#111721 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111722 = DIRECTION('',(0.,0.,1.)); +#111723 = ADVANCED_FACE('',(#111724),#111735,.T.); +#111724 = FACE_BOUND('',#111725,.T.); +#111725 = EDGE_LOOP('',(#111726,#111727,#111728,#111734)); +#111726 = ORIENTED_EDGE('',*,*,#110601,.F.); +#111727 = ORIENTED_EDGE('',*,*,#110611,.T.); +#111728 = ORIENTED_EDGE('',*,*,#111729,.T.); +#111729 = EDGE_CURVE('',#110612,#110652,#111730,.T.); +#111730 = LINE('',#111731,#111732); +#111731 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#111732 = VECTOR('',#111733,1.); +#111733 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111734 = ORIENTED_EDGE('',*,*,#110659,.T.); +#111735 = PLANE('',#111736); +#111736 = AXIS2_PLACEMENT_3D('',#111737,#111738,#111739); +#111737 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#111738 = DIRECTION('',(0.,-0.,-1.)); +#111739 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111740 = ADVANCED_FACE('',(#111741),#111782,.F.); +#111741 = FACE_BOUND('',#111742,.F.); +#111742 = EDGE_LOOP('',(#111743,#111751,#111752,#111760,#111768,#111776) + ); +#111743 = ORIENTED_EDGE('',*,*,#111744,.T.); +#111744 = EDGE_CURVE('',#111745,#110652,#111747,.T.); +#111745 = VERTEX_POINT('',#111746); +#111746 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#111747 = LINE('',#111748,#111749); +#111748 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#111749 = VECTOR('',#111750,1.); +#111750 = DIRECTION('',(0.,0.,1.)); +#111751 = ORIENTED_EDGE('',*,*,#110651,.F.); +#111752 = ORIENTED_EDGE('',*,*,#111753,.T.); +#111753 = EDGE_CURVE('',#110644,#111754,#111756,.T.); +#111754 = VERTEX_POINT('',#111755); +#111755 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#111756 = LINE('',#111757,#111758); +#111757 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#111758 = VECTOR('',#111759,1.); +#111759 = DIRECTION('',(0.,0.,-1.)); +#111760 = ORIENTED_EDGE('',*,*,#111761,.T.); +#111761 = EDGE_CURVE('',#111754,#111762,#111764,.T.); +#111762 = VERTEX_POINT('',#111763); +#111763 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#111764 = LINE('',#111765,#111766); +#111765 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#111766 = VECTOR('',#111767,1.); +#111767 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111768 = ORIENTED_EDGE('',*,*,#111769,.T.); +#111769 = EDGE_CURVE('',#111762,#111770,#111772,.T.); +#111770 = VERTEX_POINT('',#111771); +#111771 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#111772 = LINE('',#111773,#111774); +#111773 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#111774 = VECTOR('',#111775,1.); +#111775 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111776 = ORIENTED_EDGE('',*,*,#111777,.T.); +#111777 = EDGE_CURVE('',#111770,#111745,#111778,.T.); +#111778 = LINE('',#111779,#111780); +#111779 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#111780 = VECTOR('',#111781,1.); +#111781 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111782 = PLANE('',#111783); +#111783 = AXIS2_PLACEMENT_3D('',#111784,#111785,#111786); +#111784 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#111785 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111786 = DIRECTION('',(0.,0.,1.)); +#111787 = ADVANCED_FACE('',(#111788),#111799,.T.); +#111788 = FACE_BOUND('',#111789,.T.); +#111789 = EDGE_LOOP('',(#111790,#111796,#111797,#111798)); +#111790 = ORIENTED_EDGE('',*,*,#111791,.F.); +#111791 = EDGE_CURVE('',#110620,#110644,#111792,.T.); +#111792 = LINE('',#111793,#111794); +#111793 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#111794 = VECTOR('',#111795,1.); +#111795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111796 = ORIENTED_EDGE('',*,*,#110627,.T.); +#111797 = ORIENTED_EDGE('',*,*,#110635,.T.); +#111798 = ORIENTED_EDGE('',*,*,#110643,.T.); +#111799 = PLANE('',#111800); +#111800 = AXIS2_PLACEMENT_3D('',#111801,#111802,#111803); +#111801 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#111802 = DIRECTION('',(0.,-0.,-1.)); +#111803 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111804 = ADVANCED_FACE('',(#111805),#111846,.T.); +#111805 = FACE_BOUND('',#111806,.T.); +#111806 = EDGE_LOOP('',(#111807,#111815,#111816,#111824,#111832,#111840) + ); +#111807 = ORIENTED_EDGE('',*,*,#111808,.T.); +#111808 = EDGE_CURVE('',#111809,#110612,#111811,.T.); +#111809 = VERTEX_POINT('',#111810); +#111810 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#111811 = LINE('',#111812,#111813); +#111812 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#111813 = VECTOR('',#111814,1.); +#111814 = DIRECTION('',(0.,0.,1.)); +#111815 = ORIENTED_EDGE('',*,*,#110619,.F.); +#111816 = ORIENTED_EDGE('',*,*,#111817,.T.); +#111817 = EDGE_CURVE('',#110620,#111818,#111820,.T.); +#111818 = VERTEX_POINT('',#111819); +#111819 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#111820 = LINE('',#111821,#111822); +#111821 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#111822 = VECTOR('',#111823,1.); +#111823 = DIRECTION('',(0.,0.,-1.)); +#111824 = ORIENTED_EDGE('',*,*,#111825,.T.); +#111825 = EDGE_CURVE('',#111818,#111826,#111828,.T.); +#111826 = VERTEX_POINT('',#111827); +#111827 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#111828 = LINE('',#111829,#111830); +#111829 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#111830 = VECTOR('',#111831,1.); +#111831 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111832 = ORIENTED_EDGE('',*,*,#111833,.F.); +#111833 = EDGE_CURVE('',#111834,#111826,#111836,.T.); +#111834 = VERTEX_POINT('',#111835); +#111835 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#111836 = LINE('',#111837,#111838); +#111837 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#111838 = VECTOR('',#111839,1.); +#111839 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111840 = ORIENTED_EDGE('',*,*,#111841,.T.); +#111841 = EDGE_CURVE('',#111834,#111809,#111842,.T.); +#111842 = LINE('',#111843,#111844); +#111843 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#111844 = VECTOR('',#111845,1.); +#111845 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111846 = PLANE('',#111847); +#111847 = AXIS2_PLACEMENT_3D('',#111848,#111849,#111850); +#111848 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#111849 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111850 = DIRECTION('',(0.,0.,1.)); +#111851 = ADVANCED_FACE('',(#111852),#111863,.T.); +#111852 = FACE_BOUND('',#111853,.T.); +#111853 = EDGE_LOOP('',(#111854,#111855,#111856,#111862)); +#111854 = ORIENTED_EDGE('',*,*,#110667,.F.); +#111855 = ORIENTED_EDGE('',*,*,#110677,.T.); +#111856 = ORIENTED_EDGE('',*,*,#111857,.T.); +#111857 = EDGE_CURVE('',#110678,#110718,#111858,.T.); +#111858 = LINE('',#111859,#111860); +#111859 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#111860 = VECTOR('',#111861,1.); +#111861 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111862 = ORIENTED_EDGE('',*,*,#110725,.T.); +#111863 = PLANE('',#111864); +#111864 = AXIS2_PLACEMENT_3D('',#111865,#111866,#111867); +#111865 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#111866 = DIRECTION('',(0.,-0.,-1.)); +#111867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111868 = ADVANCED_FACE('',(#111869),#111910,.F.); +#111869 = FACE_BOUND('',#111870,.F.); +#111870 = EDGE_LOOP('',(#111871,#111879,#111880,#111888,#111896,#111904) + ); +#111871 = ORIENTED_EDGE('',*,*,#111872,.T.); +#111872 = EDGE_CURVE('',#111873,#110718,#111875,.T.); +#111873 = VERTEX_POINT('',#111874); +#111874 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#111875 = LINE('',#111876,#111877); +#111876 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#111877 = VECTOR('',#111878,1.); +#111878 = DIRECTION('',(0.,0.,1.)); +#111879 = ORIENTED_EDGE('',*,*,#110717,.F.); +#111880 = ORIENTED_EDGE('',*,*,#111881,.T.); +#111881 = EDGE_CURVE('',#110710,#111882,#111884,.T.); +#111882 = VERTEX_POINT('',#111883); +#111883 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#111884 = LINE('',#111885,#111886); +#111885 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#111886 = VECTOR('',#111887,1.); +#111887 = DIRECTION('',(0.,0.,-1.)); +#111888 = ORIENTED_EDGE('',*,*,#111889,.T.); +#111889 = EDGE_CURVE('',#111882,#111890,#111892,.T.); +#111890 = VERTEX_POINT('',#111891); +#111891 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#111892 = LINE('',#111893,#111894); +#111893 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#111894 = VECTOR('',#111895,1.); +#111895 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111896 = ORIENTED_EDGE('',*,*,#111897,.T.); +#111897 = EDGE_CURVE('',#111890,#111898,#111900,.T.); +#111898 = VERTEX_POINT('',#111899); +#111899 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#111900 = LINE('',#111901,#111902); +#111901 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#111902 = VECTOR('',#111903,1.); +#111903 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111904 = ORIENTED_EDGE('',*,*,#111905,.T.); +#111905 = EDGE_CURVE('',#111898,#111873,#111906,.T.); +#111906 = LINE('',#111907,#111908); +#111907 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#111908 = VECTOR('',#111909,1.); +#111909 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111910 = PLANE('',#111911); +#111911 = AXIS2_PLACEMENT_3D('',#111912,#111913,#111914); +#111912 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#111913 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111914 = DIRECTION('',(0.,0.,1.)); +#111915 = ADVANCED_FACE('',(#111916),#111927,.T.); +#111916 = FACE_BOUND('',#111917,.T.); +#111917 = EDGE_LOOP('',(#111918,#111924,#111925,#111926)); +#111918 = ORIENTED_EDGE('',*,*,#111919,.F.); +#111919 = EDGE_CURVE('',#110686,#110710,#111920,.T.); +#111920 = LINE('',#111921,#111922); +#111921 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#111922 = VECTOR('',#111923,1.); +#111923 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111924 = ORIENTED_EDGE('',*,*,#110693,.T.); +#111925 = ORIENTED_EDGE('',*,*,#110701,.T.); +#111926 = ORIENTED_EDGE('',*,*,#110709,.T.); +#111927 = PLANE('',#111928); +#111928 = AXIS2_PLACEMENT_3D('',#111929,#111930,#111931); +#111929 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#111930 = DIRECTION('',(0.,-0.,-1.)); +#111931 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111932 = ADVANCED_FACE('',(#111933),#111974,.T.); +#111933 = FACE_BOUND('',#111934,.T.); +#111934 = EDGE_LOOP('',(#111935,#111943,#111944,#111952,#111960,#111968) + ); +#111935 = ORIENTED_EDGE('',*,*,#111936,.T.); +#111936 = EDGE_CURVE('',#111937,#110678,#111939,.T.); +#111937 = VERTEX_POINT('',#111938); +#111938 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#111939 = LINE('',#111940,#111941); +#111940 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#111941 = VECTOR('',#111942,1.); +#111942 = DIRECTION('',(0.,0.,1.)); +#111943 = ORIENTED_EDGE('',*,*,#110685,.F.); +#111944 = ORIENTED_EDGE('',*,*,#111945,.T.); +#111945 = EDGE_CURVE('',#110686,#111946,#111948,.T.); +#111946 = VERTEX_POINT('',#111947); +#111947 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#111948 = LINE('',#111949,#111950); +#111949 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#111950 = VECTOR('',#111951,1.); +#111951 = DIRECTION('',(0.,0.,-1.)); +#111952 = ORIENTED_EDGE('',*,*,#111953,.T.); +#111953 = EDGE_CURVE('',#111946,#111954,#111956,.T.); +#111954 = VERTEX_POINT('',#111955); +#111955 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#111956 = LINE('',#111957,#111958); +#111957 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#111958 = VECTOR('',#111959,1.); +#111959 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111960 = ORIENTED_EDGE('',*,*,#111961,.F.); +#111961 = EDGE_CURVE('',#111962,#111954,#111964,.T.); +#111962 = VERTEX_POINT('',#111963); +#111963 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#111964 = LINE('',#111965,#111966); +#111965 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#111966 = VECTOR('',#111967,1.); +#111967 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111968 = ORIENTED_EDGE('',*,*,#111969,.T.); +#111969 = EDGE_CURVE('',#111962,#111937,#111970,.T.); +#111970 = LINE('',#111971,#111972); +#111971 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#111972 = VECTOR('',#111973,1.); +#111973 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111974 = PLANE('',#111975); +#111975 = AXIS2_PLACEMENT_3D('',#111976,#111977,#111978); +#111976 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#111977 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111978 = DIRECTION('',(0.,0.,1.)); +#111979 = ADVANCED_FACE('',(#111980),#111991,.T.); +#111980 = FACE_BOUND('',#111981,.T.); +#111981 = EDGE_LOOP('',(#111982,#111983,#111984,#111990)); +#111982 = ORIENTED_EDGE('',*,*,#110733,.F.); +#111983 = ORIENTED_EDGE('',*,*,#110743,.T.); +#111984 = ORIENTED_EDGE('',*,*,#111985,.T.); +#111985 = EDGE_CURVE('',#110744,#110784,#111986,.T.); +#111986 = LINE('',#111987,#111988); +#111987 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#111988 = VECTOR('',#111989,1.); +#111989 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111990 = ORIENTED_EDGE('',*,*,#110791,.T.); +#111991 = PLANE('',#111992); +#111992 = AXIS2_PLACEMENT_3D('',#111993,#111994,#111995); +#111993 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#111994 = DIRECTION('',(0.,-0.,-1.)); +#111995 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111996 = ADVANCED_FACE('',(#111997),#112038,.F.); +#111997 = FACE_BOUND('',#111998,.F.); +#111998 = EDGE_LOOP('',(#111999,#112007,#112008,#112016,#112024,#112032) + ); +#111999 = ORIENTED_EDGE('',*,*,#112000,.T.); +#112000 = EDGE_CURVE('',#112001,#110784,#112003,.T.); +#112001 = VERTEX_POINT('',#112002); +#112002 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#112003 = LINE('',#112004,#112005); +#112004 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#112005 = VECTOR('',#112006,1.); +#112006 = DIRECTION('',(0.,0.,1.)); +#112007 = ORIENTED_EDGE('',*,*,#110783,.F.); +#112008 = ORIENTED_EDGE('',*,*,#112009,.T.); +#112009 = EDGE_CURVE('',#110776,#112010,#112012,.T.); +#112010 = VERTEX_POINT('',#112011); +#112011 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#112012 = LINE('',#112013,#112014); +#112013 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#112014 = VECTOR('',#112015,1.); +#112015 = DIRECTION('',(0.,0.,-1.)); +#112016 = ORIENTED_EDGE('',*,*,#112017,.T.); +#112017 = EDGE_CURVE('',#112010,#112018,#112020,.T.); +#112018 = VERTEX_POINT('',#112019); +#112019 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#112020 = LINE('',#112021,#112022); +#112021 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#112022 = VECTOR('',#112023,1.); +#112023 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112024 = ORIENTED_EDGE('',*,*,#112025,.T.); +#112025 = EDGE_CURVE('',#112018,#112026,#112028,.T.); +#112026 = VERTEX_POINT('',#112027); +#112027 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#112028 = LINE('',#112029,#112030); +#112029 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#112030 = VECTOR('',#112031,1.); +#112031 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112032 = ORIENTED_EDGE('',*,*,#112033,.T.); +#112033 = EDGE_CURVE('',#112026,#112001,#112034,.T.); +#112034 = LINE('',#112035,#112036); +#112035 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#112036 = VECTOR('',#112037,1.); +#112037 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112038 = PLANE('',#112039); +#112039 = AXIS2_PLACEMENT_3D('',#112040,#112041,#112042); +#112040 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#112041 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112042 = DIRECTION('',(0.,0.,1.)); +#112043 = ADVANCED_FACE('',(#112044),#112055,.T.); +#112044 = FACE_BOUND('',#112045,.T.); +#112045 = EDGE_LOOP('',(#112046,#112052,#112053,#112054)); +#112046 = ORIENTED_EDGE('',*,*,#112047,.F.); +#112047 = EDGE_CURVE('',#110752,#110776,#112048,.T.); +#112048 = LINE('',#112049,#112050); +#112049 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#112050 = VECTOR('',#112051,1.); +#112051 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112052 = ORIENTED_EDGE('',*,*,#110759,.T.); +#112053 = ORIENTED_EDGE('',*,*,#110767,.T.); +#112054 = ORIENTED_EDGE('',*,*,#110775,.T.); +#112055 = PLANE('',#112056); +#112056 = AXIS2_PLACEMENT_3D('',#112057,#112058,#112059); +#112057 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#112058 = DIRECTION('',(0.,-0.,-1.)); +#112059 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112060 = ADVANCED_FACE('',(#112061),#112102,.T.); +#112061 = FACE_BOUND('',#112062,.T.); +#112062 = EDGE_LOOP('',(#112063,#112071,#112072,#112080,#112088,#112096) + ); +#112063 = ORIENTED_EDGE('',*,*,#112064,.T.); +#112064 = EDGE_CURVE('',#112065,#110744,#112067,.T.); +#112065 = VERTEX_POINT('',#112066); +#112066 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#112067 = LINE('',#112068,#112069); +#112068 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#112069 = VECTOR('',#112070,1.); +#112070 = DIRECTION('',(0.,0.,1.)); +#112071 = ORIENTED_EDGE('',*,*,#110751,.F.); +#112072 = ORIENTED_EDGE('',*,*,#112073,.T.); +#112073 = EDGE_CURVE('',#110752,#112074,#112076,.T.); +#112074 = VERTEX_POINT('',#112075); +#112075 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#112076 = LINE('',#112077,#112078); +#112077 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#112078 = VECTOR('',#112079,1.); +#112079 = DIRECTION('',(0.,0.,-1.)); +#112080 = ORIENTED_EDGE('',*,*,#112081,.T.); +#112081 = EDGE_CURVE('',#112074,#112082,#112084,.T.); +#112082 = VERTEX_POINT('',#112083); +#112083 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#112084 = LINE('',#112085,#112086); +#112085 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#112086 = VECTOR('',#112087,1.); +#112087 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112088 = ORIENTED_EDGE('',*,*,#112089,.F.); +#112089 = EDGE_CURVE('',#112090,#112082,#112092,.T.); +#112090 = VERTEX_POINT('',#112091); +#112091 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#112092 = LINE('',#112093,#112094); +#112093 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#112094 = VECTOR('',#112095,1.); +#112095 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112096 = ORIENTED_EDGE('',*,*,#112097,.T.); +#112097 = EDGE_CURVE('',#112090,#112065,#112098,.T.); +#112098 = LINE('',#112099,#112100); +#112099 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#112100 = VECTOR('',#112101,1.); +#112101 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112102 = PLANE('',#112103); +#112103 = AXIS2_PLACEMENT_3D('',#112104,#112105,#112106); +#112104 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#112105 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112106 = DIRECTION('',(0.,0.,1.)); +#112107 = ADVANCED_FACE('',(#112108),#112119,.T.); +#112108 = FACE_BOUND('',#112109,.T.); +#112109 = EDGE_LOOP('',(#112110,#112111,#112112,#112118)); +#112110 = ORIENTED_EDGE('',*,*,#110799,.F.); +#112111 = ORIENTED_EDGE('',*,*,#110809,.T.); +#112112 = ORIENTED_EDGE('',*,*,#112113,.T.); +#112113 = EDGE_CURVE('',#110810,#110850,#112114,.T.); +#112114 = LINE('',#112115,#112116); +#112115 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#112116 = VECTOR('',#112117,1.); +#112117 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112118 = ORIENTED_EDGE('',*,*,#110857,.T.); +#112119 = PLANE('',#112120); +#112120 = AXIS2_PLACEMENT_3D('',#112121,#112122,#112123); +#112121 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#112122 = DIRECTION('',(0.,-0.,-1.)); +#112123 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112124 = ADVANCED_FACE('',(#112125),#112166,.F.); +#112125 = FACE_BOUND('',#112126,.F.); +#112126 = EDGE_LOOP('',(#112127,#112135,#112136,#112144,#112152,#112160) + ); +#112127 = ORIENTED_EDGE('',*,*,#112128,.T.); +#112128 = EDGE_CURVE('',#112129,#110850,#112131,.T.); +#112129 = VERTEX_POINT('',#112130); +#112130 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#112131 = LINE('',#112132,#112133); +#112132 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#112133 = VECTOR('',#112134,1.); +#112134 = DIRECTION('',(0.,0.,1.)); +#112135 = ORIENTED_EDGE('',*,*,#110849,.F.); +#112136 = ORIENTED_EDGE('',*,*,#112137,.T.); +#112137 = EDGE_CURVE('',#110842,#112138,#112140,.T.); +#112138 = VERTEX_POINT('',#112139); +#112139 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#112140 = LINE('',#112141,#112142); +#112141 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#112142 = VECTOR('',#112143,1.); +#112143 = DIRECTION('',(0.,0.,-1.)); +#112144 = ORIENTED_EDGE('',*,*,#112145,.T.); +#112145 = EDGE_CURVE('',#112138,#112146,#112148,.T.); +#112146 = VERTEX_POINT('',#112147); +#112147 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#112148 = LINE('',#112149,#112150); +#112149 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#112150 = VECTOR('',#112151,1.); +#112151 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112152 = ORIENTED_EDGE('',*,*,#112153,.T.); +#112153 = EDGE_CURVE('',#112146,#112154,#112156,.T.); +#112154 = VERTEX_POINT('',#112155); +#112155 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#112156 = LINE('',#112157,#112158); +#112157 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#112158 = VECTOR('',#112159,1.); +#112159 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112160 = ORIENTED_EDGE('',*,*,#112161,.T.); +#112161 = EDGE_CURVE('',#112154,#112129,#112162,.T.); +#112162 = LINE('',#112163,#112164); +#112163 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#112164 = VECTOR('',#112165,1.); +#112165 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112166 = PLANE('',#112167); +#112167 = AXIS2_PLACEMENT_3D('',#112168,#112169,#112170); +#112168 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#112169 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112170 = DIRECTION('',(0.,0.,1.)); +#112171 = ADVANCED_FACE('',(#112172),#112183,.T.); +#112172 = FACE_BOUND('',#112173,.T.); +#112173 = EDGE_LOOP('',(#112174,#112180,#112181,#112182)); +#112174 = ORIENTED_EDGE('',*,*,#112175,.F.); +#112175 = EDGE_CURVE('',#110818,#110842,#112176,.T.); +#112176 = LINE('',#112177,#112178); +#112177 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#112178 = VECTOR('',#112179,1.); +#112179 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112180 = ORIENTED_EDGE('',*,*,#110825,.T.); +#112181 = ORIENTED_EDGE('',*,*,#110833,.T.); +#112182 = ORIENTED_EDGE('',*,*,#110841,.T.); +#112183 = PLANE('',#112184); +#112184 = AXIS2_PLACEMENT_3D('',#112185,#112186,#112187); +#112185 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#112186 = DIRECTION('',(0.,-0.,-1.)); +#112187 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112188 = ADVANCED_FACE('',(#112189),#112230,.T.); +#112189 = FACE_BOUND('',#112190,.T.); +#112190 = EDGE_LOOP('',(#112191,#112199,#112200,#112208,#112216,#112224) + ); +#112191 = ORIENTED_EDGE('',*,*,#112192,.T.); +#112192 = EDGE_CURVE('',#112193,#110810,#112195,.T.); +#112193 = VERTEX_POINT('',#112194); +#112194 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#112195 = LINE('',#112196,#112197); +#112196 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#112197 = VECTOR('',#112198,1.); +#112198 = DIRECTION('',(0.,0.,1.)); +#112199 = ORIENTED_EDGE('',*,*,#110817,.F.); +#112200 = ORIENTED_EDGE('',*,*,#112201,.T.); +#112201 = EDGE_CURVE('',#110818,#112202,#112204,.T.); +#112202 = VERTEX_POINT('',#112203); +#112203 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#112204 = LINE('',#112205,#112206); +#112205 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#112206 = VECTOR('',#112207,1.); +#112207 = DIRECTION('',(0.,0.,-1.)); +#112208 = ORIENTED_EDGE('',*,*,#112209,.T.); +#112209 = EDGE_CURVE('',#112202,#112210,#112212,.T.); +#112210 = VERTEX_POINT('',#112211); +#112211 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#112212 = LINE('',#112213,#112214); +#112213 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#112214 = VECTOR('',#112215,1.); +#112215 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112216 = ORIENTED_EDGE('',*,*,#112217,.F.); +#112217 = EDGE_CURVE('',#112218,#112210,#112220,.T.); +#112218 = VERTEX_POINT('',#112219); +#112219 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#112220 = LINE('',#112221,#112222); +#112221 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#112222 = VECTOR('',#112223,1.); +#112223 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112224 = ORIENTED_EDGE('',*,*,#112225,.T.); +#112225 = EDGE_CURVE('',#112218,#112193,#112226,.T.); +#112226 = LINE('',#112227,#112228); +#112227 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#112228 = VECTOR('',#112229,1.); +#112229 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112230 = PLANE('',#112231); +#112231 = AXIS2_PLACEMENT_3D('',#112232,#112233,#112234); +#112232 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#112233 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112234 = DIRECTION('',(0.,0.,1.)); +#112235 = ADVANCED_FACE('',(#112236),#112261,.F.); +#112236 = FACE_BOUND('',#112237,.F.); +#112237 = EDGE_LOOP('',(#112238,#112246,#112254,#112260)); +#112238 = ORIENTED_EDGE('',*,*,#112239,.T.); +#112239 = EDGE_CURVE('',#110896,#112240,#112242,.T.); +#112240 = VERTEX_POINT('',#112241); +#112241 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#112242 = LINE('',#112243,#112244); +#112243 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#112244 = VECTOR('',#112245,1.); +#112245 = DIRECTION('',(0.,-0.,-1.)); +#112246 = ORIENTED_EDGE('',*,*,#112247,.T.); +#112247 = EDGE_CURVE('',#112240,#112248,#112250,.T.); +#112248 = VERTEX_POINT('',#112249); +#112249 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#112250 = LINE('',#112251,#112252); +#112251 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#112252 = VECTOR('',#112253,1.); +#112253 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112254 = ORIENTED_EDGE('',*,*,#112255,.F.); +#112255 = EDGE_CURVE('',#110905,#112248,#112256,.T.); +#112256 = LINE('',#112257,#112258); +#112257 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#112258 = VECTOR('',#112259,1.); +#112259 = DIRECTION('',(0.,-0.,-1.)); +#112260 = ORIENTED_EDGE('',*,*,#110912,.F.); +#112261 = PLANE('',#112262); +#112262 = AXIS2_PLACEMENT_3D('',#112263,#112264,#112265); +#112263 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#112264 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112265 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112266 = ADVANCED_FACE('',(#112267),#112317,.F.); +#112267 = FACE_BOUND('',#112268,.F.); +#112268 = EDGE_LOOP('',(#112269,#112270,#112271,#112279,#112287,#112295, + #112303,#112311)); +#112269 = ORIENTED_EDGE('',*,*,#110936,.F.); +#112270 = ORIENTED_EDGE('',*,*,#112255,.T.); +#112271 = ORIENTED_EDGE('',*,*,#112272,.T.); +#112272 = EDGE_CURVE('',#112248,#112273,#112275,.T.); +#112273 = VERTEX_POINT('',#112274); +#112274 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#112275 = LINE('',#112276,#112277); +#112276 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#112277 = VECTOR('',#112278,1.); +#112278 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112279 = ORIENTED_EDGE('',*,*,#112280,.T.); +#112280 = EDGE_CURVE('',#112273,#112281,#112283,.T.); +#112281 = VERTEX_POINT('',#112282); +#112282 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#112283 = LINE('',#112284,#112285); +#112284 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#112285 = VECTOR('',#112286,1.); +#112286 = DIRECTION('',(0.,-0.,1.)); +#112287 = ORIENTED_EDGE('',*,*,#112288,.F.); +#112288 = EDGE_CURVE('',#112289,#112281,#112291,.T.); +#112289 = VERTEX_POINT('',#112290); +#112290 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#112291 = LINE('',#112292,#112293); +#112292 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#112293 = VECTOR('',#112294,1.); +#112294 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112295 = ORIENTED_EDGE('',*,*,#112296,.F.); +#112296 = EDGE_CURVE('',#112297,#112289,#112299,.T.); +#112297 = VERTEX_POINT('',#112298); +#112298 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#112299 = LINE('',#112300,#112301); +#112300 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#112301 = VECTOR('',#112302,1.); +#112302 = DIRECTION('',(0.,-0.,1.)); +#112303 = ORIENTED_EDGE('',*,*,#112304,.T.); +#112304 = EDGE_CURVE('',#112297,#112305,#112307,.T.); +#112305 = VERTEX_POINT('',#112306); +#112306 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#112307 = LINE('',#112308,#112309); +#112308 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#112309 = VECTOR('',#112310,1.); +#112310 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112311 = ORIENTED_EDGE('',*,*,#112312,.F.); +#112312 = EDGE_CURVE('',#110929,#112305,#112313,.T.); +#112313 = LINE('',#112314,#112315); +#112314 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#112315 = VECTOR('',#112316,1.); +#112316 = DIRECTION('',(0.,-0.,-1.)); +#112317 = PLANE('',#112318); +#112318 = AXIS2_PLACEMENT_3D('',#112319,#112320,#112321); +#112319 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#112320 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112321 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112322 = ADVANCED_FACE('',(#112323),#112341,.F.); +#112323 = FACE_BOUND('',#112324,.F.); +#112324 = EDGE_LOOP('',(#112325,#112326,#112334,#112340)); +#112325 = ORIENTED_EDGE('',*,*,#112312,.T.); +#112326 = ORIENTED_EDGE('',*,*,#112327,.T.); +#112327 = EDGE_CURVE('',#112305,#112328,#112330,.T.); +#112328 = VERTEX_POINT('',#112329); +#112329 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#112330 = LINE('',#112331,#112332); +#112331 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#112332 = VECTOR('',#112333,1.); +#112333 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112334 = ORIENTED_EDGE('',*,*,#112335,.F.); +#112335 = EDGE_CURVE('',#110953,#112328,#112336,.T.); +#112336 = LINE('',#112337,#112338); +#112337 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#112338 = VECTOR('',#112339,1.); +#112339 = DIRECTION('',(0.,-0.,-1.)); +#112340 = ORIENTED_EDGE('',*,*,#110960,.F.); +#112341 = PLANE('',#112342); +#112342 = AXIS2_PLACEMENT_3D('',#112343,#112344,#112345); +#112343 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#112344 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112345 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112346 = ADVANCED_FACE('',(#112347),#112390,.F.); +#112347 = FACE_BOUND('',#112348,.F.); +#112348 = EDGE_LOOP('',(#112349,#112350,#112351,#112359,#112367,#112375, + #112383,#112389)); +#112349 = ORIENTED_EDGE('',*,*,#110977,.F.); +#112350 = ORIENTED_EDGE('',*,*,#112335,.T.); +#112351 = ORIENTED_EDGE('',*,*,#112352,.T.); +#112352 = EDGE_CURVE('',#112328,#112353,#112355,.T.); +#112353 = VERTEX_POINT('',#112354); +#112354 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#112355 = LINE('',#112356,#112357); +#112356 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#112357 = VECTOR('',#112358,1.); +#112358 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112359 = ORIENTED_EDGE('',*,*,#112360,.F.); +#112360 = EDGE_CURVE('',#112361,#112353,#112363,.T.); +#112361 = VERTEX_POINT('',#112362); +#112362 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#112363 = LINE('',#112364,#112365); +#112364 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#112365 = VECTOR('',#112366,1.); +#112366 = DIRECTION('',(-0.,0.,-1.)); +#112367 = ORIENTED_EDGE('',*,*,#112368,.T.); +#112368 = EDGE_CURVE('',#112361,#112369,#112371,.T.); +#112369 = VERTEX_POINT('',#112370); +#112370 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#112371 = LINE('',#112372,#112373); +#112372 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#112373 = VECTOR('',#112374,1.); +#112374 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112375 = ORIENTED_EDGE('',*,*,#112376,.T.); +#112376 = EDGE_CURVE('',#112369,#112377,#112379,.T.); +#112377 = VERTEX_POINT('',#112378); +#112378 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#112379 = LINE('',#112380,#112381); +#112380 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#112381 = VECTOR('',#112382,1.); +#112382 = DIRECTION('',(-0.,0.,-1.)); +#112383 = ORIENTED_EDGE('',*,*,#112384,.T.); +#112384 = EDGE_CURVE('',#112377,#112240,#112385,.T.); +#112385 = LINE('',#112386,#112387); +#112386 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#112387 = VECTOR('',#112388,1.); +#112388 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112389 = ORIENTED_EDGE('',*,*,#112239,.F.); +#112390 = PLANE('',#112391); +#112391 = AXIS2_PLACEMENT_3D('',#112392,#112393,#112394); +#112392 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#112393 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112394 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112395 = ADVANCED_FACE('',(#112396),#112421,.F.); +#112396 = FACE_BOUND('',#112397,.F.); +#112397 = EDGE_LOOP('',(#112398,#112406,#112414,#112420)); +#112398 = ORIENTED_EDGE('',*,*,#112399,.T.); +#112399 = EDGE_CURVE('',#110992,#112400,#112402,.T.); +#112400 = VERTEX_POINT('',#112401); +#112401 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#112402 = LINE('',#112403,#112404); +#112403 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#112404 = VECTOR('',#112405,1.); +#112405 = DIRECTION('',(0.,-0.,-1.)); +#112406 = ORIENTED_EDGE('',*,*,#112407,.T.); +#112407 = EDGE_CURVE('',#112400,#112408,#112410,.T.); +#112408 = VERTEX_POINT('',#112409); +#112409 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#112410 = LINE('',#112411,#112412); +#112411 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#112412 = VECTOR('',#112413,1.); +#112413 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112414 = ORIENTED_EDGE('',*,*,#112415,.F.); +#112415 = EDGE_CURVE('',#111001,#112408,#112416,.T.); +#112416 = LINE('',#112417,#112418); +#112417 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#112418 = VECTOR('',#112419,1.); +#112419 = DIRECTION('',(0.,-0.,-1.)); +#112420 = ORIENTED_EDGE('',*,*,#111008,.F.); +#112421 = PLANE('',#112422); +#112422 = AXIS2_PLACEMENT_3D('',#112423,#112424,#112425); +#112423 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#112424 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112425 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112426 = ADVANCED_FACE('',(#112427),#112477,.F.); +#112427 = FACE_BOUND('',#112428,.F.); +#112428 = EDGE_LOOP('',(#112429,#112430,#112431,#112439,#112447,#112455, + #112463,#112471)); +#112429 = ORIENTED_EDGE('',*,*,#111032,.F.); +#112430 = ORIENTED_EDGE('',*,*,#112415,.T.); +#112431 = ORIENTED_EDGE('',*,*,#112432,.T.); +#112432 = EDGE_CURVE('',#112408,#112433,#112435,.T.); +#112433 = VERTEX_POINT('',#112434); +#112434 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#112435 = LINE('',#112436,#112437); +#112436 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#112437 = VECTOR('',#112438,1.); +#112438 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112439 = ORIENTED_EDGE('',*,*,#112440,.T.); +#112440 = EDGE_CURVE('',#112433,#112441,#112443,.T.); +#112441 = VERTEX_POINT('',#112442); +#112442 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#112443 = LINE('',#112444,#112445); +#112444 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#112445 = VECTOR('',#112446,1.); +#112446 = DIRECTION('',(0.,-0.,1.)); +#112447 = ORIENTED_EDGE('',*,*,#112448,.F.); +#112448 = EDGE_CURVE('',#112449,#112441,#112451,.T.); +#112449 = VERTEX_POINT('',#112450); +#112450 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#112451 = LINE('',#112452,#112453); +#112452 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#112453 = VECTOR('',#112454,1.); +#112454 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112455 = ORIENTED_EDGE('',*,*,#112456,.F.); +#112456 = EDGE_CURVE('',#112457,#112449,#112459,.T.); +#112457 = VERTEX_POINT('',#112458); +#112458 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#112459 = LINE('',#112460,#112461); +#112460 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#112461 = VECTOR('',#112462,1.); +#112462 = DIRECTION('',(0.,-0.,1.)); +#112463 = ORIENTED_EDGE('',*,*,#112464,.T.); +#112464 = EDGE_CURVE('',#112457,#112465,#112467,.T.); +#112465 = VERTEX_POINT('',#112466); +#112466 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#112467 = LINE('',#112468,#112469); +#112468 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#112469 = VECTOR('',#112470,1.); +#112470 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112471 = ORIENTED_EDGE('',*,*,#112472,.F.); +#112472 = EDGE_CURVE('',#111025,#112465,#112473,.T.); +#112473 = LINE('',#112474,#112475); +#112474 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#112475 = VECTOR('',#112476,1.); +#112476 = DIRECTION('',(0.,-0.,-1.)); +#112477 = PLANE('',#112478); +#112478 = AXIS2_PLACEMENT_3D('',#112479,#112480,#112481); +#112479 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#112480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112481 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112482 = ADVANCED_FACE('',(#112483),#112501,.F.); +#112483 = FACE_BOUND('',#112484,.F.); +#112484 = EDGE_LOOP('',(#112485,#112486,#112494,#112500)); +#112485 = ORIENTED_EDGE('',*,*,#112472,.T.); +#112486 = ORIENTED_EDGE('',*,*,#112487,.T.); +#112487 = EDGE_CURVE('',#112465,#112488,#112490,.T.); +#112488 = VERTEX_POINT('',#112489); +#112489 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#112490 = LINE('',#112491,#112492); +#112491 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#112492 = VECTOR('',#112493,1.); +#112493 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112494 = ORIENTED_EDGE('',*,*,#112495,.F.); +#112495 = EDGE_CURVE('',#111049,#112488,#112496,.T.); +#112496 = LINE('',#112497,#112498); +#112497 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#112498 = VECTOR('',#112499,1.); +#112499 = DIRECTION('',(0.,-0.,-1.)); +#112500 = ORIENTED_EDGE('',*,*,#111056,.F.); +#112501 = PLANE('',#112502); +#112502 = AXIS2_PLACEMENT_3D('',#112503,#112504,#112505); +#112503 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#112504 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112505 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112506 = ADVANCED_FACE('',(#112507),#112550,.F.); +#112507 = FACE_BOUND('',#112508,.F.); +#112508 = EDGE_LOOP('',(#112509,#112510,#112511,#112519,#112527,#112535, + #112543,#112549)); +#112509 = ORIENTED_EDGE('',*,*,#111073,.F.); +#112510 = ORIENTED_EDGE('',*,*,#112495,.T.); +#112511 = ORIENTED_EDGE('',*,*,#112512,.T.); +#112512 = EDGE_CURVE('',#112488,#112513,#112515,.T.); +#112513 = VERTEX_POINT('',#112514); +#112514 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#112515 = LINE('',#112516,#112517); +#112516 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#112517 = VECTOR('',#112518,1.); +#112518 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112519 = ORIENTED_EDGE('',*,*,#112520,.F.); +#112520 = EDGE_CURVE('',#112521,#112513,#112523,.T.); +#112521 = VERTEX_POINT('',#112522); +#112522 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#112523 = LINE('',#112524,#112525); +#112524 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#112525 = VECTOR('',#112526,1.); +#112526 = DIRECTION('',(-0.,0.,-1.)); +#112527 = ORIENTED_EDGE('',*,*,#112528,.T.); +#112528 = EDGE_CURVE('',#112521,#112529,#112531,.T.); +#112529 = VERTEX_POINT('',#112530); +#112530 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#112531 = LINE('',#112532,#112533); +#112532 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#112533 = VECTOR('',#112534,1.); +#112534 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112535 = ORIENTED_EDGE('',*,*,#112536,.T.); +#112536 = EDGE_CURVE('',#112529,#112537,#112539,.T.); +#112537 = VERTEX_POINT('',#112538); +#112538 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#112539 = LINE('',#112540,#112541); +#112540 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#112541 = VECTOR('',#112542,1.); +#112542 = DIRECTION('',(-0.,0.,-1.)); +#112543 = ORIENTED_EDGE('',*,*,#112544,.T.); +#112544 = EDGE_CURVE('',#112537,#112400,#112545,.T.); +#112545 = LINE('',#112546,#112547); +#112546 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#112547 = VECTOR('',#112548,1.); +#112548 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112549 = ORIENTED_EDGE('',*,*,#112399,.F.); +#112550 = PLANE('',#112551); +#112551 = AXIS2_PLACEMENT_3D('',#112552,#112553,#112554); +#112552 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#112553 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112554 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112555 = ADVANCED_FACE('',(#112556),#112581,.F.); +#112556 = FACE_BOUND('',#112557,.F.); +#112557 = EDGE_LOOP('',(#112558,#112566,#112574,#112580)); +#112558 = ORIENTED_EDGE('',*,*,#112559,.T.); +#112559 = EDGE_CURVE('',#111088,#112560,#112562,.T.); +#112560 = VERTEX_POINT('',#112561); +#112561 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#112562 = LINE('',#112563,#112564); +#112563 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#112564 = VECTOR('',#112565,1.); +#112565 = DIRECTION('',(0.,-0.,-1.)); +#112566 = ORIENTED_EDGE('',*,*,#112567,.T.); +#112567 = EDGE_CURVE('',#112560,#112568,#112570,.T.); +#112568 = VERTEX_POINT('',#112569); +#112569 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#112570 = LINE('',#112571,#112572); +#112571 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#112572 = VECTOR('',#112573,1.); +#112573 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112574 = ORIENTED_EDGE('',*,*,#112575,.F.); +#112575 = EDGE_CURVE('',#111097,#112568,#112576,.T.); +#112576 = LINE('',#112577,#112578); +#112577 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#112578 = VECTOR('',#112579,1.); +#112579 = DIRECTION('',(0.,-0.,-1.)); +#112580 = ORIENTED_EDGE('',*,*,#111104,.F.); +#112581 = PLANE('',#112582); +#112582 = AXIS2_PLACEMENT_3D('',#112583,#112584,#112585); +#112583 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#112584 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112585 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112586 = ADVANCED_FACE('',(#112587),#112637,.F.); +#112587 = FACE_BOUND('',#112588,.F.); +#112588 = EDGE_LOOP('',(#112589,#112590,#112591,#112599,#112607,#112615, + #112623,#112631)); +#112589 = ORIENTED_EDGE('',*,*,#111128,.F.); +#112590 = ORIENTED_EDGE('',*,*,#112575,.T.); +#112591 = ORIENTED_EDGE('',*,*,#112592,.T.); +#112592 = EDGE_CURVE('',#112568,#112593,#112595,.T.); +#112593 = VERTEX_POINT('',#112594); +#112594 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#112595 = LINE('',#112596,#112597); +#112596 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#112597 = VECTOR('',#112598,1.); +#112598 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112599 = ORIENTED_EDGE('',*,*,#112600,.T.); +#112600 = EDGE_CURVE('',#112593,#112601,#112603,.T.); +#112601 = VERTEX_POINT('',#112602); +#112602 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#112603 = LINE('',#112604,#112605); +#112604 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#112605 = VECTOR('',#112606,1.); +#112606 = DIRECTION('',(0.,-0.,1.)); +#112607 = ORIENTED_EDGE('',*,*,#112608,.F.); +#112608 = EDGE_CURVE('',#112609,#112601,#112611,.T.); +#112609 = VERTEX_POINT('',#112610); +#112610 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#112611 = LINE('',#112612,#112613); +#112612 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#112613 = VECTOR('',#112614,1.); +#112614 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112615 = ORIENTED_EDGE('',*,*,#112616,.F.); +#112616 = EDGE_CURVE('',#112617,#112609,#112619,.T.); +#112617 = VERTEX_POINT('',#112618); +#112618 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#112619 = LINE('',#112620,#112621); +#112620 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#112621 = VECTOR('',#112622,1.); +#112622 = DIRECTION('',(0.,-0.,1.)); +#112623 = ORIENTED_EDGE('',*,*,#112624,.T.); +#112624 = EDGE_CURVE('',#112617,#112625,#112627,.T.); +#112625 = VERTEX_POINT('',#112626); +#112626 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#112627 = LINE('',#112628,#112629); +#112628 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#112629 = VECTOR('',#112630,1.); +#112630 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112631 = ORIENTED_EDGE('',*,*,#112632,.F.); +#112632 = EDGE_CURVE('',#111121,#112625,#112633,.T.); +#112633 = LINE('',#112634,#112635); +#112634 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#112635 = VECTOR('',#112636,1.); +#112636 = DIRECTION('',(0.,-0.,-1.)); +#112637 = PLANE('',#112638); +#112638 = AXIS2_PLACEMENT_3D('',#112639,#112640,#112641); +#112639 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#112640 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112641 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112642 = ADVANCED_FACE('',(#112643),#112661,.F.); +#112643 = FACE_BOUND('',#112644,.F.); +#112644 = EDGE_LOOP('',(#112645,#112646,#112654,#112660)); +#112645 = ORIENTED_EDGE('',*,*,#112632,.T.); +#112646 = ORIENTED_EDGE('',*,*,#112647,.T.); +#112647 = EDGE_CURVE('',#112625,#112648,#112650,.T.); +#112648 = VERTEX_POINT('',#112649); +#112649 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#112650 = LINE('',#112651,#112652); +#112651 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#112652 = VECTOR('',#112653,1.); +#112653 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112654 = ORIENTED_EDGE('',*,*,#112655,.F.); +#112655 = EDGE_CURVE('',#111145,#112648,#112656,.T.); +#112656 = LINE('',#112657,#112658); +#112657 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#112658 = VECTOR('',#112659,1.); +#112659 = DIRECTION('',(0.,-0.,-1.)); +#112660 = ORIENTED_EDGE('',*,*,#111152,.F.); +#112661 = PLANE('',#112662); +#112662 = AXIS2_PLACEMENT_3D('',#112663,#112664,#112665); +#112663 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#112664 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112665 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112666 = ADVANCED_FACE('',(#112667),#112710,.F.); +#112667 = FACE_BOUND('',#112668,.F.); +#112668 = EDGE_LOOP('',(#112669,#112670,#112671,#112679,#112687,#112695, + #112703,#112709)); +#112669 = ORIENTED_EDGE('',*,*,#111169,.F.); +#112670 = ORIENTED_EDGE('',*,*,#112655,.T.); +#112671 = ORIENTED_EDGE('',*,*,#112672,.T.); +#112672 = EDGE_CURVE('',#112648,#112673,#112675,.T.); +#112673 = VERTEX_POINT('',#112674); +#112674 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#112675 = LINE('',#112676,#112677); +#112676 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#112677 = VECTOR('',#112678,1.); +#112678 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112679 = ORIENTED_EDGE('',*,*,#112680,.F.); +#112680 = EDGE_CURVE('',#112681,#112673,#112683,.T.); +#112681 = VERTEX_POINT('',#112682); +#112682 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#112683 = LINE('',#112684,#112685); +#112684 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#112685 = VECTOR('',#112686,1.); +#112686 = DIRECTION('',(-0.,0.,-1.)); +#112687 = ORIENTED_EDGE('',*,*,#112688,.T.); +#112688 = EDGE_CURVE('',#112681,#112689,#112691,.T.); +#112689 = VERTEX_POINT('',#112690); +#112690 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#112691 = LINE('',#112692,#112693); +#112692 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#112693 = VECTOR('',#112694,1.); +#112694 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112695 = ORIENTED_EDGE('',*,*,#112696,.T.); +#112696 = EDGE_CURVE('',#112689,#112697,#112699,.T.); +#112697 = VERTEX_POINT('',#112698); +#112698 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#112699 = LINE('',#112700,#112701); +#112700 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#112701 = VECTOR('',#112702,1.); +#112702 = DIRECTION('',(-0.,0.,-1.)); +#112703 = ORIENTED_EDGE('',*,*,#112704,.T.); +#112704 = EDGE_CURVE('',#112697,#112560,#112705,.T.); +#112705 = LINE('',#112706,#112707); +#112706 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#112707 = VECTOR('',#112708,1.); +#112708 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112709 = ORIENTED_EDGE('',*,*,#112559,.F.); +#112710 = PLANE('',#112711); +#112711 = AXIS2_PLACEMENT_3D('',#112712,#112713,#112714); +#112712 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#112713 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112714 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112715 = ADVANCED_FACE('',(#112716),#112741,.F.); +#112716 = FACE_BOUND('',#112717,.F.); +#112717 = EDGE_LOOP('',(#112718,#112726,#112734,#112740)); +#112718 = ORIENTED_EDGE('',*,*,#112719,.T.); +#112719 = EDGE_CURVE('',#111184,#112720,#112722,.T.); +#112720 = VERTEX_POINT('',#112721); +#112721 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#112722 = LINE('',#112723,#112724); +#112723 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#112724 = VECTOR('',#112725,1.); +#112725 = DIRECTION('',(0.,-0.,-1.)); +#112726 = ORIENTED_EDGE('',*,*,#112727,.T.); +#112727 = EDGE_CURVE('',#112720,#112728,#112730,.T.); +#112728 = VERTEX_POINT('',#112729); +#112729 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#112730 = LINE('',#112731,#112732); +#112731 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#112732 = VECTOR('',#112733,1.); +#112733 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112734 = ORIENTED_EDGE('',*,*,#112735,.F.); +#112735 = EDGE_CURVE('',#111193,#112728,#112736,.T.); +#112736 = LINE('',#112737,#112738); +#112737 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#112738 = VECTOR('',#112739,1.); +#112739 = DIRECTION('',(0.,-0.,-1.)); +#112740 = ORIENTED_EDGE('',*,*,#111200,.F.); +#112741 = PLANE('',#112742); +#112742 = AXIS2_PLACEMENT_3D('',#112743,#112744,#112745); +#112743 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#112744 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112745 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112746 = ADVANCED_FACE('',(#112747),#112797,.F.); +#112747 = FACE_BOUND('',#112748,.F.); +#112748 = EDGE_LOOP('',(#112749,#112750,#112751,#112759,#112767,#112775, + #112783,#112791)); +#112749 = ORIENTED_EDGE('',*,*,#111224,.F.); +#112750 = ORIENTED_EDGE('',*,*,#112735,.T.); +#112751 = ORIENTED_EDGE('',*,*,#112752,.T.); +#112752 = EDGE_CURVE('',#112728,#112753,#112755,.T.); +#112753 = VERTEX_POINT('',#112754); +#112754 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#112755 = LINE('',#112756,#112757); +#112756 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#112757 = VECTOR('',#112758,1.); +#112758 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112759 = ORIENTED_EDGE('',*,*,#112760,.T.); +#112760 = EDGE_CURVE('',#112753,#112761,#112763,.T.); +#112761 = VERTEX_POINT('',#112762); +#112762 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#112763 = LINE('',#112764,#112765); +#112764 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#112765 = VECTOR('',#112766,1.); +#112766 = DIRECTION('',(0.,-0.,1.)); +#112767 = ORIENTED_EDGE('',*,*,#112768,.F.); +#112768 = EDGE_CURVE('',#112769,#112761,#112771,.T.); +#112769 = VERTEX_POINT('',#112770); +#112770 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#112771 = LINE('',#112772,#112773); +#112772 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#112773 = VECTOR('',#112774,1.); +#112774 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112775 = ORIENTED_EDGE('',*,*,#112776,.F.); +#112776 = EDGE_CURVE('',#112777,#112769,#112779,.T.); +#112777 = VERTEX_POINT('',#112778); +#112778 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#112779 = LINE('',#112780,#112781); +#112780 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#112781 = VECTOR('',#112782,1.); +#112782 = DIRECTION('',(0.,-0.,1.)); +#112783 = ORIENTED_EDGE('',*,*,#112784,.T.); +#112784 = EDGE_CURVE('',#112777,#112785,#112787,.T.); +#112785 = VERTEX_POINT('',#112786); +#112786 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#112787 = LINE('',#112788,#112789); +#112788 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#112789 = VECTOR('',#112790,1.); +#112790 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112791 = ORIENTED_EDGE('',*,*,#112792,.F.); +#112792 = EDGE_CURVE('',#111217,#112785,#112793,.T.); +#112793 = LINE('',#112794,#112795); +#112794 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#112795 = VECTOR('',#112796,1.); +#112796 = DIRECTION('',(0.,-0.,-1.)); +#112797 = PLANE('',#112798); +#112798 = AXIS2_PLACEMENT_3D('',#112799,#112800,#112801); +#112799 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#112800 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112801 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112802 = ADVANCED_FACE('',(#112803),#112821,.F.); +#112803 = FACE_BOUND('',#112804,.F.); +#112804 = EDGE_LOOP('',(#112805,#112806,#112814,#112820)); +#112805 = ORIENTED_EDGE('',*,*,#112792,.T.); +#112806 = ORIENTED_EDGE('',*,*,#112807,.T.); +#112807 = EDGE_CURVE('',#112785,#112808,#112810,.T.); +#112808 = VERTEX_POINT('',#112809); +#112809 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#112810 = LINE('',#112811,#112812); +#112811 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#112812 = VECTOR('',#112813,1.); +#112813 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112814 = ORIENTED_EDGE('',*,*,#112815,.F.); +#112815 = EDGE_CURVE('',#111241,#112808,#112816,.T.); +#112816 = LINE('',#112817,#112818); +#112817 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#112818 = VECTOR('',#112819,1.); +#112819 = DIRECTION('',(0.,-0.,-1.)); +#112820 = ORIENTED_EDGE('',*,*,#111248,.F.); +#112821 = PLANE('',#112822); +#112822 = AXIS2_PLACEMENT_3D('',#112823,#112824,#112825); +#112823 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#112824 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112825 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112826 = ADVANCED_FACE('',(#112827),#112870,.F.); +#112827 = FACE_BOUND('',#112828,.F.); +#112828 = EDGE_LOOP('',(#112829,#112830,#112831,#112839,#112847,#112855, + #112863,#112869)); +#112829 = ORIENTED_EDGE('',*,*,#111265,.F.); +#112830 = ORIENTED_EDGE('',*,*,#112815,.T.); +#112831 = ORIENTED_EDGE('',*,*,#112832,.T.); +#112832 = EDGE_CURVE('',#112808,#112833,#112835,.T.); +#112833 = VERTEX_POINT('',#112834); +#112834 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#112835 = LINE('',#112836,#112837); +#112836 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#112837 = VECTOR('',#112838,1.); +#112838 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112839 = ORIENTED_EDGE('',*,*,#112840,.F.); +#112840 = EDGE_CURVE('',#112841,#112833,#112843,.T.); +#112841 = VERTEX_POINT('',#112842); +#112842 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#112843 = LINE('',#112844,#112845); +#112844 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#112845 = VECTOR('',#112846,1.); +#112846 = DIRECTION('',(-0.,0.,-1.)); +#112847 = ORIENTED_EDGE('',*,*,#112848,.T.); +#112848 = EDGE_CURVE('',#112841,#112849,#112851,.T.); +#112849 = VERTEX_POINT('',#112850); +#112850 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#112851 = LINE('',#112852,#112853); +#112852 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#112853 = VECTOR('',#112854,1.); +#112854 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112855 = ORIENTED_EDGE('',*,*,#112856,.T.); +#112856 = EDGE_CURVE('',#112849,#112857,#112859,.T.); +#112857 = VERTEX_POINT('',#112858); +#112858 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#112859 = LINE('',#112860,#112861); +#112860 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#112861 = VECTOR('',#112862,1.); +#112862 = DIRECTION('',(-0.,0.,-1.)); +#112863 = ORIENTED_EDGE('',*,*,#112864,.T.); +#112864 = EDGE_CURVE('',#112857,#112720,#112865,.T.); +#112865 = LINE('',#112866,#112867); +#112866 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#112867 = VECTOR('',#112868,1.); +#112868 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112869 = ORIENTED_EDGE('',*,*,#112719,.F.); +#112870 = PLANE('',#112871); +#112871 = AXIS2_PLACEMENT_3D('',#112872,#112873,#112874); +#112872 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#112873 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112874 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112875 = ADVANCED_FACE('',(#112876),#112901,.F.); +#112876 = FACE_BOUND('',#112877,.F.); +#112877 = EDGE_LOOP('',(#112878,#112886,#112894,#112900)); +#112878 = ORIENTED_EDGE('',*,*,#112879,.T.); +#112879 = EDGE_CURVE('',#111280,#112880,#112882,.T.); +#112880 = VERTEX_POINT('',#112881); +#112881 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#112882 = LINE('',#112883,#112884); +#112883 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#112884 = VECTOR('',#112885,1.); +#112885 = DIRECTION('',(0.,-0.,-1.)); +#112886 = ORIENTED_EDGE('',*,*,#112887,.T.); +#112887 = EDGE_CURVE('',#112880,#112888,#112890,.T.); +#112888 = VERTEX_POINT('',#112889); +#112889 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#112890 = LINE('',#112891,#112892); +#112891 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#112892 = VECTOR('',#112893,1.); +#112893 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112894 = ORIENTED_EDGE('',*,*,#112895,.F.); +#112895 = EDGE_CURVE('',#111289,#112888,#112896,.T.); +#112896 = LINE('',#112897,#112898); +#112897 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#112898 = VECTOR('',#112899,1.); +#112899 = DIRECTION('',(0.,-0.,-1.)); +#112900 = ORIENTED_EDGE('',*,*,#111296,.F.); +#112901 = PLANE('',#112902); +#112902 = AXIS2_PLACEMENT_3D('',#112903,#112904,#112905); +#112903 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#112904 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112905 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112906 = ADVANCED_FACE('',(#112907),#112957,.F.); +#112907 = FACE_BOUND('',#112908,.F.); +#112908 = EDGE_LOOP('',(#112909,#112910,#112911,#112919,#112927,#112935, + #112943,#112951)); +#112909 = ORIENTED_EDGE('',*,*,#111320,.F.); +#112910 = ORIENTED_EDGE('',*,*,#112895,.T.); +#112911 = ORIENTED_EDGE('',*,*,#112912,.T.); +#112912 = EDGE_CURVE('',#112888,#112913,#112915,.T.); +#112913 = VERTEX_POINT('',#112914); +#112914 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#112915 = LINE('',#112916,#112917); +#112916 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#112917 = VECTOR('',#112918,1.); +#112918 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112919 = ORIENTED_EDGE('',*,*,#112920,.T.); +#112920 = EDGE_CURVE('',#112913,#112921,#112923,.T.); +#112921 = VERTEX_POINT('',#112922); +#112922 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#112923 = LINE('',#112924,#112925); +#112924 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#112925 = VECTOR('',#112926,1.); +#112926 = DIRECTION('',(0.,-0.,1.)); +#112927 = ORIENTED_EDGE('',*,*,#112928,.F.); +#112928 = EDGE_CURVE('',#112929,#112921,#112931,.T.); +#112929 = VERTEX_POINT('',#112930); +#112930 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#112931 = LINE('',#112932,#112933); +#112932 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#112933 = VECTOR('',#112934,1.); +#112934 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112935 = ORIENTED_EDGE('',*,*,#112936,.F.); +#112936 = EDGE_CURVE('',#112937,#112929,#112939,.T.); +#112937 = VERTEX_POINT('',#112938); +#112938 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#112939 = LINE('',#112940,#112941); +#112940 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#112941 = VECTOR('',#112942,1.); +#112942 = DIRECTION('',(0.,-0.,1.)); +#112943 = ORIENTED_EDGE('',*,*,#112944,.T.); +#112944 = EDGE_CURVE('',#112937,#112945,#112947,.T.); +#112945 = VERTEX_POINT('',#112946); +#112946 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#112947 = LINE('',#112948,#112949); +#112948 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#112949 = VECTOR('',#112950,1.); +#112950 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112951 = ORIENTED_EDGE('',*,*,#112952,.F.); +#112952 = EDGE_CURVE('',#111313,#112945,#112953,.T.); +#112953 = LINE('',#112954,#112955); +#112954 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#112955 = VECTOR('',#112956,1.); +#112956 = DIRECTION('',(0.,-0.,-1.)); +#112957 = PLANE('',#112958); +#112958 = AXIS2_PLACEMENT_3D('',#112959,#112960,#112961); +#112959 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#112960 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112961 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112962 = ADVANCED_FACE('',(#112963),#112981,.F.); +#112963 = FACE_BOUND('',#112964,.F.); +#112964 = EDGE_LOOP('',(#112965,#112966,#112974,#112980)); +#112965 = ORIENTED_EDGE('',*,*,#112952,.T.); +#112966 = ORIENTED_EDGE('',*,*,#112967,.T.); +#112967 = EDGE_CURVE('',#112945,#112968,#112970,.T.); +#112968 = VERTEX_POINT('',#112969); +#112969 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#112970 = LINE('',#112971,#112972); +#112971 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#112972 = VECTOR('',#112973,1.); +#112973 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112974 = ORIENTED_EDGE('',*,*,#112975,.F.); +#112975 = EDGE_CURVE('',#111337,#112968,#112976,.T.); +#112976 = LINE('',#112977,#112978); +#112977 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#112978 = VECTOR('',#112979,1.); +#112979 = DIRECTION('',(0.,-0.,-1.)); +#112980 = ORIENTED_EDGE('',*,*,#111344,.F.); +#112981 = PLANE('',#112982); +#112982 = AXIS2_PLACEMENT_3D('',#112983,#112984,#112985); +#112983 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#112984 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112985 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112986 = ADVANCED_FACE('',(#112987),#113030,.F.); +#112987 = FACE_BOUND('',#112988,.F.); +#112988 = EDGE_LOOP('',(#112989,#112990,#112991,#112999,#113007,#113015, + #113023,#113029)); +#112989 = ORIENTED_EDGE('',*,*,#111361,.F.); +#112990 = ORIENTED_EDGE('',*,*,#112975,.T.); +#112991 = ORIENTED_EDGE('',*,*,#112992,.T.); +#112992 = EDGE_CURVE('',#112968,#112993,#112995,.T.); +#112993 = VERTEX_POINT('',#112994); +#112994 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#112995 = LINE('',#112996,#112997); +#112996 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#112997 = VECTOR('',#112998,1.); +#112998 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112999 = ORIENTED_EDGE('',*,*,#113000,.F.); +#113000 = EDGE_CURVE('',#113001,#112993,#113003,.T.); +#113001 = VERTEX_POINT('',#113002); +#113002 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#113003 = LINE('',#113004,#113005); +#113004 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#113005 = VECTOR('',#113006,1.); +#113006 = DIRECTION('',(-0.,0.,-1.)); +#113007 = ORIENTED_EDGE('',*,*,#113008,.T.); +#113008 = EDGE_CURVE('',#113001,#113009,#113011,.T.); +#113009 = VERTEX_POINT('',#113010); +#113010 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#113011 = LINE('',#113012,#113013); +#113012 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#113013 = VECTOR('',#113014,1.); +#113014 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113015 = ORIENTED_EDGE('',*,*,#113016,.T.); +#113016 = EDGE_CURVE('',#113009,#113017,#113019,.T.); +#113017 = VERTEX_POINT('',#113018); +#113018 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#113019 = LINE('',#113020,#113021); +#113020 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#113021 = VECTOR('',#113022,1.); +#113022 = DIRECTION('',(-0.,0.,-1.)); +#113023 = ORIENTED_EDGE('',*,*,#113024,.T.); +#113024 = EDGE_CURVE('',#113017,#112880,#113025,.T.); +#113025 = LINE('',#113026,#113027); +#113026 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#113027 = VECTOR('',#113028,1.); +#113028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113029 = ORIENTED_EDGE('',*,*,#112879,.F.); +#113030 = PLANE('',#113031); +#113031 = AXIS2_PLACEMENT_3D('',#113032,#113033,#113034); +#113032 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#113033 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113034 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113035 = ADVANCED_FACE('',(#113036),#113061,.F.); +#113036 = FACE_BOUND('',#113037,.F.); +#113037 = EDGE_LOOP('',(#113038,#113046,#113054,#113060)); +#113038 = ORIENTED_EDGE('',*,*,#113039,.T.); +#113039 = EDGE_CURVE('',#111376,#113040,#113042,.T.); +#113040 = VERTEX_POINT('',#113041); +#113041 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#113042 = LINE('',#113043,#113044); +#113043 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#113044 = VECTOR('',#113045,1.); +#113045 = DIRECTION('',(0.,-0.,-1.)); +#113046 = ORIENTED_EDGE('',*,*,#113047,.T.); +#113047 = EDGE_CURVE('',#113040,#113048,#113050,.T.); +#113048 = VERTEX_POINT('',#113049); +#113049 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#113050 = LINE('',#113051,#113052); +#113051 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#113052 = VECTOR('',#113053,1.); +#113053 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113054 = ORIENTED_EDGE('',*,*,#113055,.F.); +#113055 = EDGE_CURVE('',#111385,#113048,#113056,.T.); +#113056 = LINE('',#113057,#113058); +#113057 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#113058 = VECTOR('',#113059,1.); +#113059 = DIRECTION('',(0.,-0.,-1.)); +#113060 = ORIENTED_EDGE('',*,*,#111392,.F.); +#113061 = PLANE('',#113062); +#113062 = AXIS2_PLACEMENT_3D('',#113063,#113064,#113065); +#113063 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#113064 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113065 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113066 = ADVANCED_FACE('',(#113067),#113117,.F.); +#113067 = FACE_BOUND('',#113068,.F.); +#113068 = EDGE_LOOP('',(#113069,#113070,#113071,#113079,#113087,#113095, + #113103,#113111)); +#113069 = ORIENTED_EDGE('',*,*,#111416,.F.); +#113070 = ORIENTED_EDGE('',*,*,#113055,.T.); +#113071 = ORIENTED_EDGE('',*,*,#113072,.T.); +#113072 = EDGE_CURVE('',#113048,#113073,#113075,.T.); +#113073 = VERTEX_POINT('',#113074); +#113074 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#113075 = LINE('',#113076,#113077); +#113076 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#113077 = VECTOR('',#113078,1.); +#113078 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113079 = ORIENTED_EDGE('',*,*,#113080,.T.); +#113080 = EDGE_CURVE('',#113073,#113081,#113083,.T.); +#113081 = VERTEX_POINT('',#113082); +#113082 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#113083 = LINE('',#113084,#113085); +#113084 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#113085 = VECTOR('',#113086,1.); +#113086 = DIRECTION('',(0.,-0.,1.)); +#113087 = ORIENTED_EDGE('',*,*,#113088,.F.); +#113088 = EDGE_CURVE('',#113089,#113081,#113091,.T.); +#113089 = VERTEX_POINT('',#113090); +#113090 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#113091 = LINE('',#113092,#113093); +#113092 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#113093 = VECTOR('',#113094,1.); +#113094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113095 = ORIENTED_EDGE('',*,*,#113096,.F.); +#113096 = EDGE_CURVE('',#113097,#113089,#113099,.T.); +#113097 = VERTEX_POINT('',#113098); +#113098 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#113099 = LINE('',#113100,#113101); +#113100 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#113101 = VECTOR('',#113102,1.); +#113102 = DIRECTION('',(0.,-0.,1.)); +#113103 = ORIENTED_EDGE('',*,*,#113104,.T.); +#113104 = EDGE_CURVE('',#113097,#113105,#113107,.T.); +#113105 = VERTEX_POINT('',#113106); +#113106 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#113107 = LINE('',#113108,#113109); +#113108 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#113109 = VECTOR('',#113110,1.); +#113110 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113111 = ORIENTED_EDGE('',*,*,#113112,.F.); +#113112 = EDGE_CURVE('',#111409,#113105,#113113,.T.); +#113113 = LINE('',#113114,#113115); +#113114 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#113115 = VECTOR('',#113116,1.); +#113116 = DIRECTION('',(0.,-0.,-1.)); +#113117 = PLANE('',#113118); +#113118 = AXIS2_PLACEMENT_3D('',#113119,#113120,#113121); +#113119 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#113120 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113121 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113122 = ADVANCED_FACE('',(#113123),#113141,.F.); +#113123 = FACE_BOUND('',#113124,.F.); +#113124 = EDGE_LOOP('',(#113125,#113126,#113134,#113140)); +#113125 = ORIENTED_EDGE('',*,*,#113112,.T.); +#113126 = ORIENTED_EDGE('',*,*,#113127,.T.); +#113127 = EDGE_CURVE('',#113105,#113128,#113130,.T.); +#113128 = VERTEX_POINT('',#113129); +#113129 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#113130 = LINE('',#113131,#113132); +#113131 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#113132 = VECTOR('',#113133,1.); +#113133 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113134 = ORIENTED_EDGE('',*,*,#113135,.F.); +#113135 = EDGE_CURVE('',#111433,#113128,#113136,.T.); +#113136 = LINE('',#113137,#113138); +#113137 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#113138 = VECTOR('',#113139,1.); +#113139 = DIRECTION('',(0.,-0.,-1.)); +#113140 = ORIENTED_EDGE('',*,*,#111440,.F.); +#113141 = PLANE('',#113142); +#113142 = AXIS2_PLACEMENT_3D('',#113143,#113144,#113145); +#113143 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#113144 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113145 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113146 = ADVANCED_FACE('',(#113147),#113190,.F.); +#113147 = FACE_BOUND('',#113148,.F.); +#113148 = EDGE_LOOP('',(#113149,#113150,#113151,#113159,#113167,#113175, + #113183,#113189)); +#113149 = ORIENTED_EDGE('',*,*,#111457,.F.); +#113150 = ORIENTED_EDGE('',*,*,#113135,.T.); +#113151 = ORIENTED_EDGE('',*,*,#113152,.T.); +#113152 = EDGE_CURVE('',#113128,#113153,#113155,.T.); +#113153 = VERTEX_POINT('',#113154); +#113154 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#113155 = LINE('',#113156,#113157); +#113156 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#113157 = VECTOR('',#113158,1.); +#113158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113159 = ORIENTED_EDGE('',*,*,#113160,.F.); +#113160 = EDGE_CURVE('',#113161,#113153,#113163,.T.); +#113161 = VERTEX_POINT('',#113162); +#113162 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#113163 = LINE('',#113164,#113165); +#113164 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#113165 = VECTOR('',#113166,1.); +#113166 = DIRECTION('',(-0.,0.,-1.)); +#113167 = ORIENTED_EDGE('',*,*,#113168,.T.); +#113168 = EDGE_CURVE('',#113161,#113169,#113171,.T.); +#113169 = VERTEX_POINT('',#113170); +#113170 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#113171 = LINE('',#113172,#113173); +#113172 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#113173 = VECTOR('',#113174,1.); +#113174 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113175 = ORIENTED_EDGE('',*,*,#113176,.T.); +#113176 = EDGE_CURVE('',#113169,#113177,#113179,.T.); +#113177 = VERTEX_POINT('',#113178); +#113178 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#113179 = LINE('',#113180,#113181); +#113180 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#113181 = VECTOR('',#113182,1.); +#113182 = DIRECTION('',(-0.,0.,-1.)); +#113183 = ORIENTED_EDGE('',*,*,#113184,.T.); +#113184 = EDGE_CURVE('',#113177,#113040,#113185,.T.); +#113185 = LINE('',#113186,#113187); +#113186 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#113187 = VECTOR('',#113188,1.); +#113188 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113189 = ORIENTED_EDGE('',*,*,#113039,.F.); +#113190 = PLANE('',#113191); +#113191 = AXIS2_PLACEMENT_3D('',#113192,#113193,#113194); +#113192 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#113193 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113195 = ADVANCED_FACE('',(#113196),#113207,.T.); +#113196 = FACE_BOUND('',#113197,.T.); +#113197 = EDGE_LOOP('',(#113198,#113204,#113205,#113206)); +#113198 = ORIENTED_EDGE('',*,*,#113199,.T.); +#113199 = EDGE_CURVE('',#111553,#111489,#113200,.T.); +#113200 = LINE('',#113201,#113202); +#113201 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#113202 = VECTOR('',#113203,1.); +#113203 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113204 = ORIENTED_EDGE('',*,*,#111488,.T.); +#113205 = ORIENTED_EDGE('',*,*,#111473,.F.); +#113206 = ORIENTED_EDGE('',*,*,#111552,.F.); +#113207 = PLANE('',#113208); +#113208 = AXIS2_PLACEMENT_3D('',#113209,#113210,#113211); +#113209 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#113210 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113211 = DIRECTION('',(0.,0.,1.)); +#113212 = ADVANCED_FACE('',(#113213),#113224,.T.); +#113213 = FACE_BOUND('',#113214,.T.); +#113214 = EDGE_LOOP('',(#113215,#113221,#113222,#113223)); +#113215 = ORIENTED_EDGE('',*,*,#113216,.T.); +#113216 = EDGE_CURVE('',#111578,#111514,#113217,.T.); +#113217 = LINE('',#113218,#113219); +#113218 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#113219 = VECTOR('',#113220,1.); +#113220 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113221 = ORIENTED_EDGE('',*,*,#111521,.T.); +#113222 = ORIENTED_EDGE('',*,*,#113199,.F.); +#113223 = ORIENTED_EDGE('',*,*,#111585,.F.); +#113224 = PLANE('',#113225); +#113225 = AXIS2_PLACEMENT_3D('',#113226,#113227,#113228); +#113226 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#113227 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113228 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113229 = ADVANCED_FACE('',(#113230),#113241,.T.); +#113230 = FACE_BOUND('',#113231,.T.); +#113231 = EDGE_LOOP('',(#113232,#113238,#113239,#113240)); +#113232 = ORIENTED_EDGE('',*,*,#113233,.T.); +#113233 = EDGE_CURVE('',#111570,#111506,#113234,.T.); +#113234 = LINE('',#113235,#113236); +#113235 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#113236 = VECTOR('',#113237,1.); +#113237 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113238 = ORIENTED_EDGE('',*,*,#111513,.T.); +#113239 = ORIENTED_EDGE('',*,*,#113216,.F.); +#113240 = ORIENTED_EDGE('',*,*,#111577,.T.); +#113241 = PLANE('',#113242); +#113242 = AXIS2_PLACEMENT_3D('',#113243,#113244,#113245); +#113243 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#113244 = DIRECTION('',(0.,-0.,-1.)); +#113245 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113246 = ADVANCED_FACE('',(#113247),#113258,.T.); +#113247 = FACE_BOUND('',#113248,.T.); +#113248 = EDGE_LOOP('',(#113249,#113255,#113256,#113257)); +#113249 = ORIENTED_EDGE('',*,*,#113250,.T.); +#113250 = EDGE_CURVE('',#111562,#111498,#113251,.T.); +#113251 = LINE('',#113252,#113253); +#113252 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#113253 = VECTOR('',#113254,1.); +#113254 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113255 = ORIENTED_EDGE('',*,*,#111505,.T.); +#113256 = ORIENTED_EDGE('',*,*,#113233,.F.); +#113257 = ORIENTED_EDGE('',*,*,#111569,.F.); +#113258 = PLANE('',#113259); +#113259 = AXIS2_PLACEMENT_3D('',#113260,#113261,#113262); +#113260 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#113261 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113262 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113263 = ADVANCED_FACE('',(#113264),#113270,.T.); +#113264 = FACE_BOUND('',#113265,.T.); +#113265 = EDGE_LOOP('',(#113266,#113267,#113268,#113269)); +#113266 = ORIENTED_EDGE('',*,*,#111535,.T.); +#113267 = ORIENTED_EDGE('',*,*,#111497,.T.); +#113268 = ORIENTED_EDGE('',*,*,#113250,.F.); +#113269 = ORIENTED_EDGE('',*,*,#111561,.F.); +#113270 = PLANE('',#113271); +#113271 = AXIS2_PLACEMENT_3D('',#113272,#113273,#113274); +#113272 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#113273 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113274 = DIRECTION('',(0.,0.,-1.)); +#113275 = ADVANCED_FACE('',(#113276),#113287,.T.); +#113276 = FACE_BOUND('',#113277,.T.); +#113277 = EDGE_LOOP('',(#113278,#113284,#113285,#113286)); +#113278 = ORIENTED_EDGE('',*,*,#113279,.T.); +#113279 = EDGE_CURVE('',#111681,#111617,#113280,.T.); +#113280 = LINE('',#113281,#113282); +#113281 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#113282 = VECTOR('',#113283,1.); +#113283 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113284 = ORIENTED_EDGE('',*,*,#111616,.T.); +#113285 = ORIENTED_EDGE('',*,*,#111601,.F.); +#113286 = ORIENTED_EDGE('',*,*,#111680,.F.); +#113287 = PLANE('',#113288); +#113288 = AXIS2_PLACEMENT_3D('',#113289,#113290,#113291); +#113289 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#113290 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113291 = DIRECTION('',(0.,0.,1.)); +#113292 = ADVANCED_FACE('',(#113293),#113304,.T.); +#113293 = FACE_BOUND('',#113294,.T.); +#113294 = EDGE_LOOP('',(#113295,#113301,#113302,#113303)); +#113295 = ORIENTED_EDGE('',*,*,#113296,.T.); +#113296 = EDGE_CURVE('',#111706,#111642,#113297,.T.); +#113297 = LINE('',#113298,#113299); +#113298 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#113299 = VECTOR('',#113300,1.); +#113300 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113301 = ORIENTED_EDGE('',*,*,#111649,.T.); +#113302 = ORIENTED_EDGE('',*,*,#113279,.F.); +#113303 = ORIENTED_EDGE('',*,*,#111713,.F.); +#113304 = PLANE('',#113305); +#113305 = AXIS2_PLACEMENT_3D('',#113306,#113307,#113308); +#113306 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#113307 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113308 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113309 = ADVANCED_FACE('',(#113310),#113321,.T.); +#113310 = FACE_BOUND('',#113311,.T.); +#113311 = EDGE_LOOP('',(#113312,#113318,#113319,#113320)); +#113312 = ORIENTED_EDGE('',*,*,#113313,.T.); +#113313 = EDGE_CURVE('',#111698,#111634,#113314,.T.); +#113314 = LINE('',#113315,#113316); +#113315 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#113316 = VECTOR('',#113317,1.); +#113317 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113318 = ORIENTED_EDGE('',*,*,#111641,.T.); +#113319 = ORIENTED_EDGE('',*,*,#113296,.F.); +#113320 = ORIENTED_EDGE('',*,*,#111705,.T.); +#113321 = PLANE('',#113322); +#113322 = AXIS2_PLACEMENT_3D('',#113323,#113324,#113325); +#113323 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#113324 = DIRECTION('',(0.,-0.,-1.)); +#113325 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113326 = ADVANCED_FACE('',(#113327),#113338,.T.); +#113327 = FACE_BOUND('',#113328,.T.); +#113328 = EDGE_LOOP('',(#113329,#113335,#113336,#113337)); +#113329 = ORIENTED_EDGE('',*,*,#113330,.T.); +#113330 = EDGE_CURVE('',#111690,#111626,#113331,.T.); +#113331 = LINE('',#113332,#113333); +#113332 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#113333 = VECTOR('',#113334,1.); +#113334 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113335 = ORIENTED_EDGE('',*,*,#111633,.T.); +#113336 = ORIENTED_EDGE('',*,*,#113313,.F.); +#113337 = ORIENTED_EDGE('',*,*,#111697,.F.); +#113338 = PLANE('',#113339); +#113339 = AXIS2_PLACEMENT_3D('',#113340,#113341,#113342); +#113340 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#113341 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113342 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113343 = ADVANCED_FACE('',(#113344),#113350,.T.); +#113344 = FACE_BOUND('',#113345,.T.); +#113345 = EDGE_LOOP('',(#113346,#113347,#113348,#113349)); +#113346 = ORIENTED_EDGE('',*,*,#111663,.T.); +#113347 = ORIENTED_EDGE('',*,*,#111625,.T.); +#113348 = ORIENTED_EDGE('',*,*,#113330,.F.); +#113349 = ORIENTED_EDGE('',*,*,#111689,.F.); +#113350 = PLANE('',#113351); +#113351 = AXIS2_PLACEMENT_3D('',#113352,#113353,#113354); +#113352 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#113353 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113354 = DIRECTION('',(0.,0.,-1.)); +#113355 = ADVANCED_FACE('',(#113356),#113367,.T.); +#113356 = FACE_BOUND('',#113357,.T.); +#113357 = EDGE_LOOP('',(#113358,#113364,#113365,#113366)); +#113358 = ORIENTED_EDGE('',*,*,#113359,.T.); +#113359 = EDGE_CURVE('',#111809,#111745,#113360,.T.); +#113360 = LINE('',#113361,#113362); +#113361 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#113362 = VECTOR('',#113363,1.); +#113363 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113364 = ORIENTED_EDGE('',*,*,#111744,.T.); +#113365 = ORIENTED_EDGE('',*,*,#111729,.F.); +#113366 = ORIENTED_EDGE('',*,*,#111808,.F.); +#113367 = PLANE('',#113368); +#113368 = AXIS2_PLACEMENT_3D('',#113369,#113370,#113371); +#113369 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#113370 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113371 = DIRECTION('',(0.,0.,1.)); +#113372 = ADVANCED_FACE('',(#113373),#113384,.T.); +#113373 = FACE_BOUND('',#113374,.T.); +#113374 = EDGE_LOOP('',(#113375,#113381,#113382,#113383)); +#113375 = ORIENTED_EDGE('',*,*,#113376,.T.); +#113376 = EDGE_CURVE('',#111834,#111770,#113377,.T.); +#113377 = LINE('',#113378,#113379); +#113378 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#113379 = VECTOR('',#113380,1.); +#113380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113381 = ORIENTED_EDGE('',*,*,#111777,.T.); +#113382 = ORIENTED_EDGE('',*,*,#113359,.F.); +#113383 = ORIENTED_EDGE('',*,*,#111841,.F.); +#113384 = PLANE('',#113385); +#113385 = AXIS2_PLACEMENT_3D('',#113386,#113387,#113388); +#113386 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#113387 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113388 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113389 = ADVANCED_FACE('',(#113390),#113401,.T.); +#113390 = FACE_BOUND('',#113391,.T.); +#113391 = EDGE_LOOP('',(#113392,#113398,#113399,#113400)); +#113392 = ORIENTED_EDGE('',*,*,#113393,.T.); +#113393 = EDGE_CURVE('',#111826,#111762,#113394,.T.); +#113394 = LINE('',#113395,#113396); +#113395 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#113396 = VECTOR('',#113397,1.); +#113397 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113398 = ORIENTED_EDGE('',*,*,#111769,.T.); +#113399 = ORIENTED_EDGE('',*,*,#113376,.F.); +#113400 = ORIENTED_EDGE('',*,*,#111833,.T.); +#113401 = PLANE('',#113402); +#113402 = AXIS2_PLACEMENT_3D('',#113403,#113404,#113405); +#113403 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#113404 = DIRECTION('',(0.,-0.,-1.)); +#113405 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113406 = ADVANCED_FACE('',(#113407),#113418,.T.); +#113407 = FACE_BOUND('',#113408,.T.); +#113408 = EDGE_LOOP('',(#113409,#113415,#113416,#113417)); +#113409 = ORIENTED_EDGE('',*,*,#113410,.T.); +#113410 = EDGE_CURVE('',#111818,#111754,#113411,.T.); +#113411 = LINE('',#113412,#113413); +#113412 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#113413 = VECTOR('',#113414,1.); +#113414 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113415 = ORIENTED_EDGE('',*,*,#111761,.T.); +#113416 = ORIENTED_EDGE('',*,*,#113393,.F.); +#113417 = ORIENTED_EDGE('',*,*,#111825,.F.); +#113418 = PLANE('',#113419); +#113419 = AXIS2_PLACEMENT_3D('',#113420,#113421,#113422); +#113420 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#113421 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113422 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113423 = ADVANCED_FACE('',(#113424),#113430,.T.); +#113424 = FACE_BOUND('',#113425,.T.); +#113425 = EDGE_LOOP('',(#113426,#113427,#113428,#113429)); +#113426 = ORIENTED_EDGE('',*,*,#111791,.T.); +#113427 = ORIENTED_EDGE('',*,*,#111753,.T.); +#113428 = ORIENTED_EDGE('',*,*,#113410,.F.); +#113429 = ORIENTED_EDGE('',*,*,#111817,.F.); +#113430 = PLANE('',#113431); +#113431 = AXIS2_PLACEMENT_3D('',#113432,#113433,#113434); +#113432 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#113433 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113434 = DIRECTION('',(0.,0.,-1.)); +#113435 = ADVANCED_FACE('',(#113436),#113447,.T.); +#113436 = FACE_BOUND('',#113437,.T.); +#113437 = EDGE_LOOP('',(#113438,#113444,#113445,#113446)); +#113438 = ORIENTED_EDGE('',*,*,#113439,.T.); +#113439 = EDGE_CURVE('',#111937,#111873,#113440,.T.); +#113440 = LINE('',#113441,#113442); +#113441 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#113442 = VECTOR('',#113443,1.); +#113443 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113444 = ORIENTED_EDGE('',*,*,#111872,.T.); +#113445 = ORIENTED_EDGE('',*,*,#111857,.F.); +#113446 = ORIENTED_EDGE('',*,*,#111936,.F.); +#113447 = PLANE('',#113448); +#113448 = AXIS2_PLACEMENT_3D('',#113449,#113450,#113451); +#113449 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#113450 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113451 = DIRECTION('',(0.,0.,1.)); +#113452 = ADVANCED_FACE('',(#113453),#113464,.T.); +#113453 = FACE_BOUND('',#113454,.T.); +#113454 = EDGE_LOOP('',(#113455,#113461,#113462,#113463)); +#113455 = ORIENTED_EDGE('',*,*,#113456,.T.); +#113456 = EDGE_CURVE('',#111962,#111898,#113457,.T.); +#113457 = LINE('',#113458,#113459); +#113458 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#113459 = VECTOR('',#113460,1.); +#113460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113461 = ORIENTED_EDGE('',*,*,#111905,.T.); +#113462 = ORIENTED_EDGE('',*,*,#113439,.F.); +#113463 = ORIENTED_EDGE('',*,*,#111969,.F.); +#113464 = PLANE('',#113465); +#113465 = AXIS2_PLACEMENT_3D('',#113466,#113467,#113468); +#113466 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#113467 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113468 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113469 = ADVANCED_FACE('',(#113470),#113481,.T.); +#113470 = FACE_BOUND('',#113471,.T.); +#113471 = EDGE_LOOP('',(#113472,#113478,#113479,#113480)); +#113472 = ORIENTED_EDGE('',*,*,#113473,.T.); +#113473 = EDGE_CURVE('',#111954,#111890,#113474,.T.); +#113474 = LINE('',#113475,#113476); +#113475 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#113476 = VECTOR('',#113477,1.); +#113477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113478 = ORIENTED_EDGE('',*,*,#111897,.T.); +#113479 = ORIENTED_EDGE('',*,*,#113456,.F.); +#113480 = ORIENTED_EDGE('',*,*,#111961,.T.); +#113481 = PLANE('',#113482); +#113482 = AXIS2_PLACEMENT_3D('',#113483,#113484,#113485); +#113483 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#113484 = DIRECTION('',(0.,-0.,-1.)); +#113485 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113486 = ADVANCED_FACE('',(#113487),#113498,.T.); +#113487 = FACE_BOUND('',#113488,.T.); +#113488 = EDGE_LOOP('',(#113489,#113495,#113496,#113497)); +#113489 = ORIENTED_EDGE('',*,*,#113490,.T.); +#113490 = EDGE_CURVE('',#111946,#111882,#113491,.T.); +#113491 = LINE('',#113492,#113493); +#113492 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#113493 = VECTOR('',#113494,1.); +#113494 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113495 = ORIENTED_EDGE('',*,*,#111889,.T.); +#113496 = ORIENTED_EDGE('',*,*,#113473,.F.); +#113497 = ORIENTED_EDGE('',*,*,#111953,.F.); +#113498 = PLANE('',#113499); +#113499 = AXIS2_PLACEMENT_3D('',#113500,#113501,#113502); +#113500 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#113501 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113502 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113503 = ADVANCED_FACE('',(#113504),#113510,.T.); +#113504 = FACE_BOUND('',#113505,.T.); +#113505 = EDGE_LOOP('',(#113506,#113507,#113508,#113509)); +#113506 = ORIENTED_EDGE('',*,*,#111919,.T.); +#113507 = ORIENTED_EDGE('',*,*,#111881,.T.); +#113508 = ORIENTED_EDGE('',*,*,#113490,.F.); +#113509 = ORIENTED_EDGE('',*,*,#111945,.F.); +#113510 = PLANE('',#113511); +#113511 = AXIS2_PLACEMENT_3D('',#113512,#113513,#113514); +#113512 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#113513 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113514 = DIRECTION('',(0.,0.,-1.)); +#113515 = ADVANCED_FACE('',(#113516),#113527,.T.); +#113516 = FACE_BOUND('',#113517,.T.); +#113517 = EDGE_LOOP('',(#113518,#113524,#113525,#113526)); +#113518 = ORIENTED_EDGE('',*,*,#113519,.T.); +#113519 = EDGE_CURVE('',#112065,#112001,#113520,.T.); +#113520 = LINE('',#113521,#113522); +#113521 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#113522 = VECTOR('',#113523,1.); +#113523 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113524 = ORIENTED_EDGE('',*,*,#112000,.T.); +#113525 = ORIENTED_EDGE('',*,*,#111985,.F.); +#113526 = ORIENTED_EDGE('',*,*,#112064,.F.); +#113527 = PLANE('',#113528); +#113528 = AXIS2_PLACEMENT_3D('',#113529,#113530,#113531); +#113529 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#113530 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113531 = DIRECTION('',(0.,0.,1.)); +#113532 = ADVANCED_FACE('',(#113533),#113544,.T.); +#113533 = FACE_BOUND('',#113534,.T.); +#113534 = EDGE_LOOP('',(#113535,#113541,#113542,#113543)); +#113535 = ORIENTED_EDGE('',*,*,#113536,.T.); +#113536 = EDGE_CURVE('',#112090,#112026,#113537,.T.); +#113537 = LINE('',#113538,#113539); +#113538 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#113539 = VECTOR('',#113540,1.); +#113540 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113541 = ORIENTED_EDGE('',*,*,#112033,.T.); +#113542 = ORIENTED_EDGE('',*,*,#113519,.F.); +#113543 = ORIENTED_EDGE('',*,*,#112097,.F.); +#113544 = PLANE('',#113545); +#113545 = AXIS2_PLACEMENT_3D('',#113546,#113547,#113548); +#113546 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#113547 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113548 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113549 = ADVANCED_FACE('',(#113550),#113561,.T.); +#113550 = FACE_BOUND('',#113551,.T.); +#113551 = EDGE_LOOP('',(#113552,#113558,#113559,#113560)); +#113552 = ORIENTED_EDGE('',*,*,#113553,.T.); +#113553 = EDGE_CURVE('',#112082,#112018,#113554,.T.); +#113554 = LINE('',#113555,#113556); +#113555 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#113556 = VECTOR('',#113557,1.); +#113557 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113558 = ORIENTED_EDGE('',*,*,#112025,.T.); +#113559 = ORIENTED_EDGE('',*,*,#113536,.F.); +#113560 = ORIENTED_EDGE('',*,*,#112089,.T.); +#113561 = PLANE('',#113562); +#113562 = AXIS2_PLACEMENT_3D('',#113563,#113564,#113565); +#113563 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#113564 = DIRECTION('',(0.,-0.,-1.)); +#113565 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113566 = ADVANCED_FACE('',(#113567),#113578,.T.); +#113567 = FACE_BOUND('',#113568,.T.); +#113568 = EDGE_LOOP('',(#113569,#113575,#113576,#113577)); +#113569 = ORIENTED_EDGE('',*,*,#113570,.T.); +#113570 = EDGE_CURVE('',#112074,#112010,#113571,.T.); +#113571 = LINE('',#113572,#113573); +#113572 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#113573 = VECTOR('',#113574,1.); +#113574 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113575 = ORIENTED_EDGE('',*,*,#112017,.T.); +#113576 = ORIENTED_EDGE('',*,*,#113553,.F.); +#113577 = ORIENTED_EDGE('',*,*,#112081,.F.); +#113578 = PLANE('',#113579); +#113579 = AXIS2_PLACEMENT_3D('',#113580,#113581,#113582); +#113580 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#113581 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113582 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113583 = ADVANCED_FACE('',(#113584),#113590,.T.); +#113584 = FACE_BOUND('',#113585,.T.); +#113585 = EDGE_LOOP('',(#113586,#113587,#113588,#113589)); +#113586 = ORIENTED_EDGE('',*,*,#112047,.T.); +#113587 = ORIENTED_EDGE('',*,*,#112009,.T.); +#113588 = ORIENTED_EDGE('',*,*,#113570,.F.); +#113589 = ORIENTED_EDGE('',*,*,#112073,.F.); +#113590 = PLANE('',#113591); +#113591 = AXIS2_PLACEMENT_3D('',#113592,#113593,#113594); +#113592 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#113593 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113594 = DIRECTION('',(0.,0.,-1.)); +#113595 = ADVANCED_FACE('',(#113596),#113607,.T.); +#113596 = FACE_BOUND('',#113597,.T.); +#113597 = EDGE_LOOP('',(#113598,#113604,#113605,#113606)); +#113598 = ORIENTED_EDGE('',*,*,#113599,.T.); +#113599 = EDGE_CURVE('',#112193,#112129,#113600,.T.); +#113600 = LINE('',#113601,#113602); +#113601 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#113602 = VECTOR('',#113603,1.); +#113603 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113604 = ORIENTED_EDGE('',*,*,#112128,.T.); +#113605 = ORIENTED_EDGE('',*,*,#112113,.F.); +#113606 = ORIENTED_EDGE('',*,*,#112192,.F.); +#113607 = PLANE('',#113608); +#113608 = AXIS2_PLACEMENT_3D('',#113609,#113610,#113611); +#113609 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#113610 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113611 = DIRECTION('',(0.,0.,1.)); +#113612 = ADVANCED_FACE('',(#113613),#113624,.T.); +#113613 = FACE_BOUND('',#113614,.T.); +#113614 = EDGE_LOOP('',(#113615,#113621,#113622,#113623)); +#113615 = ORIENTED_EDGE('',*,*,#113616,.T.); +#113616 = EDGE_CURVE('',#112218,#112154,#113617,.T.); +#113617 = LINE('',#113618,#113619); +#113618 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#113619 = VECTOR('',#113620,1.); +#113620 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113621 = ORIENTED_EDGE('',*,*,#112161,.T.); +#113622 = ORIENTED_EDGE('',*,*,#113599,.F.); +#113623 = ORIENTED_EDGE('',*,*,#112225,.F.); +#113624 = PLANE('',#113625); +#113625 = AXIS2_PLACEMENT_3D('',#113626,#113627,#113628); +#113626 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#113627 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113628 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113629 = ADVANCED_FACE('',(#113630),#113641,.T.); +#113630 = FACE_BOUND('',#113631,.T.); +#113631 = EDGE_LOOP('',(#113632,#113638,#113639,#113640)); +#113632 = ORIENTED_EDGE('',*,*,#113633,.T.); +#113633 = EDGE_CURVE('',#112210,#112146,#113634,.T.); +#113634 = LINE('',#113635,#113636); +#113635 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#113636 = VECTOR('',#113637,1.); +#113637 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113638 = ORIENTED_EDGE('',*,*,#112153,.T.); +#113639 = ORIENTED_EDGE('',*,*,#113616,.F.); +#113640 = ORIENTED_EDGE('',*,*,#112217,.T.); +#113641 = PLANE('',#113642); +#113642 = AXIS2_PLACEMENT_3D('',#113643,#113644,#113645); +#113643 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#113644 = DIRECTION('',(0.,-0.,-1.)); +#113645 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113646 = ADVANCED_FACE('',(#113647),#113658,.T.); +#113647 = FACE_BOUND('',#113648,.T.); +#113648 = EDGE_LOOP('',(#113649,#113655,#113656,#113657)); +#113649 = ORIENTED_EDGE('',*,*,#113650,.T.); +#113650 = EDGE_CURVE('',#112202,#112138,#113651,.T.); +#113651 = LINE('',#113652,#113653); +#113652 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#113653 = VECTOR('',#113654,1.); +#113654 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113655 = ORIENTED_EDGE('',*,*,#112145,.T.); +#113656 = ORIENTED_EDGE('',*,*,#113633,.F.); +#113657 = ORIENTED_EDGE('',*,*,#112209,.F.); +#113658 = PLANE('',#113659); +#113659 = AXIS2_PLACEMENT_3D('',#113660,#113661,#113662); +#113660 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#113661 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113662 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113663 = ADVANCED_FACE('',(#113664),#113670,.T.); +#113664 = FACE_BOUND('',#113665,.T.); +#113665 = EDGE_LOOP('',(#113666,#113667,#113668,#113669)); +#113666 = ORIENTED_EDGE('',*,*,#112175,.T.); +#113667 = ORIENTED_EDGE('',*,*,#112137,.T.); +#113668 = ORIENTED_EDGE('',*,*,#113650,.F.); +#113669 = ORIENTED_EDGE('',*,*,#112201,.F.); +#113670 = PLANE('',#113671); +#113671 = AXIS2_PLACEMENT_3D('',#113672,#113673,#113674); +#113672 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#113673 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113674 = DIRECTION('',(0.,0.,-1.)); +#113675 = ADVANCED_FACE('',(#113676),#113687,.T.); +#113676 = FACE_BOUND('',#113677,.T.); +#113677 = EDGE_LOOP('',(#113678,#113679,#113680,#113681)); +#113678 = ORIENTED_EDGE('',*,*,#112384,.T.); +#113679 = ORIENTED_EDGE('',*,*,#112247,.T.); +#113680 = ORIENTED_EDGE('',*,*,#112272,.T.); +#113681 = ORIENTED_EDGE('',*,*,#113682,.T.); +#113682 = EDGE_CURVE('',#112273,#112377,#113683,.T.); +#113683 = LINE('',#113684,#113685); +#113684 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#113685 = VECTOR('',#113686,1.); +#113686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113687 = PLANE('',#113688); +#113688 = AXIS2_PLACEMENT_3D('',#113689,#113690,#113691); +#113689 = CARTESIAN_POINT('',(-1.492093485804E-15,-12.7,0.9)); +#113690 = DIRECTION('',(0.,0.,1.)); +#113691 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113692 = ADVANCED_FACE('',(#113693),#113704,.T.); +#113693 = FACE_BOUND('',#113694,.T.); +#113694 = EDGE_LOOP('',(#113695,#113696,#113702,#113703)); +#113695 = ORIENTED_EDGE('',*,*,#112352,.T.); +#113696 = ORIENTED_EDGE('',*,*,#113697,.F.); +#113697 = EDGE_CURVE('',#112297,#112353,#113698,.T.); +#113698 = LINE('',#113699,#113700); +#113699 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#113700 = VECTOR('',#113701,1.); +#113701 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113702 = ORIENTED_EDGE('',*,*,#112304,.T.); +#113703 = ORIENTED_EDGE('',*,*,#112327,.T.); +#113704 = PLANE('',#113705); +#113705 = AXIS2_PLACEMENT_3D('',#113706,#113707,#113708); +#113706 = CARTESIAN_POINT('',(-1.492093485804E-15,-12.7,0.9)); +#113707 = DIRECTION('',(0.,0.,1.)); +#113708 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113709 = ADVANCED_FACE('',(#113710),#113753,.T.); +#113710 = FACE_BOUND('',#113711,.T.); +#113711 = EDGE_LOOP('',(#113712,#113713,#113721,#113729,#113737,#113745, + #113751,#113752)); +#113712 = ORIENTED_EDGE('',*,*,#112360,.F.); +#113713 = ORIENTED_EDGE('',*,*,#113714,.T.); +#113714 = EDGE_CURVE('',#112361,#113715,#113717,.T.); +#113715 = VERTEX_POINT('',#113716); +#113716 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#113717 = LINE('',#113718,#113719); +#113718 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#113719 = VECTOR('',#113720,1.); +#113720 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113721 = ORIENTED_EDGE('',*,*,#113722,.T.); +#113722 = EDGE_CURVE('',#113715,#113723,#113725,.T.); +#113723 = VERTEX_POINT('',#113724); +#113724 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#113725 = LINE('',#113726,#113727); +#113726 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#113727 = VECTOR('',#113728,1.); +#113728 = DIRECTION('',(0.,0.,-1.)); +#113729 = ORIENTED_EDGE('',*,*,#113730,.T.); +#113730 = EDGE_CURVE('',#113723,#113731,#113733,.T.); +#113731 = VERTEX_POINT('',#113732); +#113732 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#113733 = LINE('',#113734,#113735); +#113734 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#113735 = VECTOR('',#113736,1.); +#113736 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113737 = ORIENTED_EDGE('',*,*,#113738,.T.); +#113738 = EDGE_CURVE('',#113731,#113739,#113741,.T.); +#113739 = VERTEX_POINT('',#113740); +#113740 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113741 = LINE('',#113742,#113743); +#113742 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#113743 = VECTOR('',#113744,1.); +#113744 = DIRECTION('',(0.,0.,1.)); +#113745 = ORIENTED_EDGE('',*,*,#113746,.T.); +#113746 = EDGE_CURVE('',#113739,#112289,#113747,.T.); +#113747 = LINE('',#113748,#113749); +#113748 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113749 = VECTOR('',#113750,1.); +#113750 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113751 = ORIENTED_EDGE('',*,*,#112296,.F.); +#113752 = ORIENTED_EDGE('',*,*,#113697,.T.); +#113753 = PLANE('',#113754); +#113754 = AXIS2_PLACEMENT_3D('',#113755,#113756,#113757); +#113755 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#113756 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113757 = DIRECTION('',(0.,0.,1.)); +#113758 = ADVANCED_FACE('',(#113759),#113777,.T.); +#113759 = FACE_BOUND('',#113760,.T.); +#113760 = EDGE_LOOP('',(#113761,#113769,#113775,#113776)); +#113761 = ORIENTED_EDGE('',*,*,#113762,.T.); +#113762 = EDGE_CURVE('',#113739,#113763,#113765,.T.); +#113763 = VERTEX_POINT('',#113764); +#113764 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#113765 = LINE('',#113766,#113767); +#113766 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113767 = VECTOR('',#113768,1.); +#113768 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113769 = ORIENTED_EDGE('',*,*,#113770,.T.); +#113770 = EDGE_CURVE('',#113763,#112281,#113771,.T.); +#113771 = LINE('',#113772,#113773); +#113772 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#113773 = VECTOR('',#113774,1.); +#113774 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113775 = ORIENTED_EDGE('',*,*,#112288,.F.); +#113776 = ORIENTED_EDGE('',*,*,#113746,.F.); +#113777 = PLANE('',#113778); +#113778 = AXIS2_PLACEMENT_3D('',#113779,#113780,#113781); +#113779 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113780 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#113781 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113782 = ADVANCED_FACE('',(#113783),#113819,.F.); +#113783 = FACE_BOUND('',#113784,.F.); +#113784 = EDGE_LOOP('',(#113785,#113786,#113794,#113802,#113810,#113816, + #113817,#113818)); +#113785 = ORIENTED_EDGE('',*,*,#112376,.F.); +#113786 = ORIENTED_EDGE('',*,*,#113787,.T.); +#113787 = EDGE_CURVE('',#112369,#113788,#113790,.T.); +#113788 = VERTEX_POINT('',#113789); +#113789 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#113790 = LINE('',#113791,#113792); +#113791 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#113792 = VECTOR('',#113793,1.); +#113793 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113794 = ORIENTED_EDGE('',*,*,#113795,.T.); +#113795 = EDGE_CURVE('',#113788,#113796,#113798,.T.); +#113796 = VERTEX_POINT('',#113797); +#113797 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#113798 = LINE('',#113799,#113800); +#113799 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#113800 = VECTOR('',#113801,1.); +#113801 = DIRECTION('',(0.,0.,-1.)); +#113802 = ORIENTED_EDGE('',*,*,#113803,.T.); +#113803 = EDGE_CURVE('',#113796,#113804,#113806,.T.); +#113804 = VERTEX_POINT('',#113805); +#113805 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#113806 = LINE('',#113807,#113808); +#113807 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#113808 = VECTOR('',#113809,1.); +#113809 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113810 = ORIENTED_EDGE('',*,*,#113811,.T.); +#113811 = EDGE_CURVE('',#113804,#113763,#113812,.T.); +#113812 = LINE('',#113813,#113814); +#113813 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#113814 = VECTOR('',#113815,1.); +#113815 = DIRECTION('',(0.,0.,1.)); +#113816 = ORIENTED_EDGE('',*,*,#113770,.T.); +#113817 = ORIENTED_EDGE('',*,*,#112280,.F.); +#113818 = ORIENTED_EDGE('',*,*,#113682,.T.); +#113819 = PLANE('',#113820); +#113820 = AXIS2_PLACEMENT_3D('',#113821,#113822,#113823); +#113821 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#113822 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113823 = DIRECTION('',(0.,0.,1.)); +#113824 = ADVANCED_FACE('',(#113825),#113836,.T.); +#113825 = FACE_BOUND('',#113826,.T.); +#113826 = EDGE_LOOP('',(#113827,#113828,#113829,#113835)); +#113827 = ORIENTED_EDGE('',*,*,#112368,.T.); +#113828 = ORIENTED_EDGE('',*,*,#113787,.T.); +#113829 = ORIENTED_EDGE('',*,*,#113830,.F.); +#113830 = EDGE_CURVE('',#113715,#113788,#113831,.T.); +#113831 = LINE('',#113832,#113833); +#113832 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#113833 = VECTOR('',#113834,1.); +#113834 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113835 = ORIENTED_EDGE('',*,*,#113714,.F.); +#113836 = PLANE('',#113837); +#113837 = AXIS2_PLACEMENT_3D('',#113838,#113839,#113840); +#113838 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#113839 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113840 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113841 = ADVANCED_FACE('',(#113842),#113853,.T.); +#113842 = FACE_BOUND('',#113843,.T.); +#113843 = EDGE_LOOP('',(#113844,#113845,#113846,#113847)); +#113844 = ORIENTED_EDGE('',*,*,#112544,.T.); +#113845 = ORIENTED_EDGE('',*,*,#112407,.T.); +#113846 = ORIENTED_EDGE('',*,*,#112432,.T.); +#113847 = ORIENTED_EDGE('',*,*,#113848,.T.); +#113848 = EDGE_CURVE('',#112433,#112537,#113849,.T.); +#113849 = LINE('',#113850,#113851); +#113850 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#113851 = VECTOR('',#113852,1.); +#113852 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113853 = PLANE('',#113854); +#113854 = AXIS2_PLACEMENT_3D('',#113855,#113856,#113857); +#113855 = CARTESIAN_POINT('',(-1.210096837549E-15,-10.16,0.9)); +#113856 = DIRECTION('',(0.,0.,1.)); +#113857 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113858 = ADVANCED_FACE('',(#113859),#113870,.T.); +#113859 = FACE_BOUND('',#113860,.T.); +#113860 = EDGE_LOOP('',(#113861,#113862,#113868,#113869)); +#113861 = ORIENTED_EDGE('',*,*,#112512,.T.); +#113862 = ORIENTED_EDGE('',*,*,#113863,.F.); +#113863 = EDGE_CURVE('',#112457,#112513,#113864,.T.); +#113864 = LINE('',#113865,#113866); +#113865 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#113866 = VECTOR('',#113867,1.); +#113867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113868 = ORIENTED_EDGE('',*,*,#112464,.T.); +#113869 = ORIENTED_EDGE('',*,*,#112487,.T.); +#113870 = PLANE('',#113871); +#113871 = AXIS2_PLACEMENT_3D('',#113872,#113873,#113874); +#113872 = CARTESIAN_POINT('',(-1.210096837549E-15,-10.16,0.9)); +#113873 = DIRECTION('',(0.,0.,1.)); +#113874 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113875 = ADVANCED_FACE('',(#113876),#113919,.T.); +#113876 = FACE_BOUND('',#113877,.T.); +#113877 = EDGE_LOOP('',(#113878,#113879,#113887,#113895,#113903,#113911, + #113917,#113918)); +#113878 = ORIENTED_EDGE('',*,*,#112520,.F.); +#113879 = ORIENTED_EDGE('',*,*,#113880,.T.); +#113880 = EDGE_CURVE('',#112521,#113881,#113883,.T.); +#113881 = VERTEX_POINT('',#113882); +#113882 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#113883 = LINE('',#113884,#113885); +#113884 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#113885 = VECTOR('',#113886,1.); +#113886 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113887 = ORIENTED_EDGE('',*,*,#113888,.T.); +#113888 = EDGE_CURVE('',#113881,#113889,#113891,.T.); +#113889 = VERTEX_POINT('',#113890); +#113890 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#113891 = LINE('',#113892,#113893); +#113892 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#113893 = VECTOR('',#113894,1.); +#113894 = DIRECTION('',(0.,0.,-1.)); +#113895 = ORIENTED_EDGE('',*,*,#113896,.T.); +#113896 = EDGE_CURVE('',#113889,#113897,#113899,.T.); +#113897 = VERTEX_POINT('',#113898); +#113898 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#113899 = LINE('',#113900,#113901); +#113900 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#113901 = VECTOR('',#113902,1.); +#113902 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113903 = ORIENTED_EDGE('',*,*,#113904,.T.); +#113904 = EDGE_CURVE('',#113897,#113905,#113907,.T.); +#113905 = VERTEX_POINT('',#113906); +#113906 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113907 = LINE('',#113908,#113909); +#113908 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#113909 = VECTOR('',#113910,1.); +#113910 = DIRECTION('',(0.,0.,1.)); +#113911 = ORIENTED_EDGE('',*,*,#113912,.T.); +#113912 = EDGE_CURVE('',#113905,#112449,#113913,.T.); +#113913 = LINE('',#113914,#113915); +#113914 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113915 = VECTOR('',#113916,1.); +#113916 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113917 = ORIENTED_EDGE('',*,*,#112456,.F.); +#113918 = ORIENTED_EDGE('',*,*,#113863,.T.); +#113919 = PLANE('',#113920); +#113920 = AXIS2_PLACEMENT_3D('',#113921,#113922,#113923); +#113921 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#113922 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113923 = DIRECTION('',(0.,0.,1.)); +#113924 = ADVANCED_FACE('',(#113925),#113943,.T.); +#113925 = FACE_BOUND('',#113926,.T.); +#113926 = EDGE_LOOP('',(#113927,#113935,#113941,#113942)); +#113927 = ORIENTED_EDGE('',*,*,#113928,.T.); +#113928 = EDGE_CURVE('',#113905,#113929,#113931,.T.); +#113929 = VERTEX_POINT('',#113930); +#113930 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#113931 = LINE('',#113932,#113933); +#113932 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113933 = VECTOR('',#113934,1.); +#113934 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113935 = ORIENTED_EDGE('',*,*,#113936,.T.); +#113936 = EDGE_CURVE('',#113929,#112441,#113937,.T.); +#113937 = LINE('',#113938,#113939); +#113938 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#113939 = VECTOR('',#113940,1.); +#113940 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113941 = ORIENTED_EDGE('',*,*,#112448,.F.); +#113942 = ORIENTED_EDGE('',*,*,#113912,.F.); +#113943 = PLANE('',#113944); +#113944 = AXIS2_PLACEMENT_3D('',#113945,#113946,#113947); +#113945 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113946 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#113947 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113948 = ADVANCED_FACE('',(#113949),#113985,.F.); +#113949 = FACE_BOUND('',#113950,.F.); +#113950 = EDGE_LOOP('',(#113951,#113952,#113960,#113968,#113976,#113982, + #113983,#113984)); +#113951 = ORIENTED_EDGE('',*,*,#112536,.F.); +#113952 = ORIENTED_EDGE('',*,*,#113953,.T.); +#113953 = EDGE_CURVE('',#112529,#113954,#113956,.T.); +#113954 = VERTEX_POINT('',#113955); +#113955 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#113956 = LINE('',#113957,#113958); +#113957 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#113958 = VECTOR('',#113959,1.); +#113959 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113960 = ORIENTED_EDGE('',*,*,#113961,.T.); +#113961 = EDGE_CURVE('',#113954,#113962,#113964,.T.); +#113962 = VERTEX_POINT('',#113963); +#113963 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#113964 = LINE('',#113965,#113966); +#113965 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#113966 = VECTOR('',#113967,1.); +#113967 = DIRECTION('',(0.,0.,-1.)); +#113968 = ORIENTED_EDGE('',*,*,#113969,.T.); +#113969 = EDGE_CURVE('',#113962,#113970,#113972,.T.); +#113970 = VERTEX_POINT('',#113971); +#113971 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#113972 = LINE('',#113973,#113974); +#113973 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#113974 = VECTOR('',#113975,1.); +#113975 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113976 = ORIENTED_EDGE('',*,*,#113977,.T.); +#113977 = EDGE_CURVE('',#113970,#113929,#113978,.T.); +#113978 = LINE('',#113979,#113980); +#113979 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#113980 = VECTOR('',#113981,1.); +#113981 = DIRECTION('',(0.,0.,1.)); +#113982 = ORIENTED_EDGE('',*,*,#113936,.T.); +#113983 = ORIENTED_EDGE('',*,*,#112440,.F.); +#113984 = ORIENTED_EDGE('',*,*,#113848,.T.); +#113985 = PLANE('',#113986); +#113986 = AXIS2_PLACEMENT_3D('',#113987,#113988,#113989); +#113987 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#113988 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113989 = DIRECTION('',(0.,0.,1.)); +#113990 = ADVANCED_FACE('',(#113991),#114002,.T.); +#113991 = FACE_BOUND('',#113992,.T.); +#113992 = EDGE_LOOP('',(#113993,#113994,#113995,#114001)); +#113993 = ORIENTED_EDGE('',*,*,#112528,.T.); +#113994 = ORIENTED_EDGE('',*,*,#113953,.T.); +#113995 = ORIENTED_EDGE('',*,*,#113996,.F.); +#113996 = EDGE_CURVE('',#113881,#113954,#113997,.T.); +#113997 = LINE('',#113998,#113999); +#113998 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#113999 = VECTOR('',#114000,1.); +#114000 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114001 = ORIENTED_EDGE('',*,*,#113880,.F.); +#114002 = PLANE('',#114003); +#114003 = AXIS2_PLACEMENT_3D('',#114004,#114005,#114006); +#114004 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#114005 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114006 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114007 = ADVANCED_FACE('',(#114008),#114019,.T.); +#114008 = FACE_BOUND('',#114009,.T.); +#114009 = EDGE_LOOP('',(#114010,#114011,#114012,#114013)); +#114010 = ORIENTED_EDGE('',*,*,#112704,.T.); +#114011 = ORIENTED_EDGE('',*,*,#112567,.T.); +#114012 = ORIENTED_EDGE('',*,*,#112592,.T.); +#114013 = ORIENTED_EDGE('',*,*,#114014,.T.); +#114014 = EDGE_CURVE('',#112593,#112697,#114015,.T.); +#114015 = LINE('',#114016,#114017); +#114016 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#114017 = VECTOR('',#114018,1.); +#114018 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114019 = PLANE('',#114020); +#114020 = AXIS2_PLACEMENT_3D('',#114021,#114022,#114023); +#114021 = CARTESIAN_POINT('',(-9.281001892939E-16,-7.62,0.9)); +#114022 = DIRECTION('',(0.,0.,1.)); +#114023 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114024 = ADVANCED_FACE('',(#114025),#114036,.T.); +#114025 = FACE_BOUND('',#114026,.T.); +#114026 = EDGE_LOOP('',(#114027,#114028,#114034,#114035)); +#114027 = ORIENTED_EDGE('',*,*,#112672,.T.); +#114028 = ORIENTED_EDGE('',*,*,#114029,.F.); +#114029 = EDGE_CURVE('',#112617,#112673,#114030,.T.); +#114030 = LINE('',#114031,#114032); +#114031 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#114032 = VECTOR('',#114033,1.); +#114033 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114034 = ORIENTED_EDGE('',*,*,#112624,.T.); +#114035 = ORIENTED_EDGE('',*,*,#112647,.T.); +#114036 = PLANE('',#114037); +#114037 = AXIS2_PLACEMENT_3D('',#114038,#114039,#114040); +#114038 = CARTESIAN_POINT('',(-9.281001892939E-16,-7.62,0.9)); +#114039 = DIRECTION('',(0.,0.,1.)); +#114040 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114041 = ADVANCED_FACE('',(#114042),#114085,.T.); +#114042 = FACE_BOUND('',#114043,.T.); +#114043 = EDGE_LOOP('',(#114044,#114045,#114053,#114061,#114069,#114077, + #114083,#114084)); +#114044 = ORIENTED_EDGE('',*,*,#112680,.F.); +#114045 = ORIENTED_EDGE('',*,*,#114046,.T.); +#114046 = EDGE_CURVE('',#112681,#114047,#114049,.T.); +#114047 = VERTEX_POINT('',#114048); +#114048 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114049 = LINE('',#114050,#114051); +#114050 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#114051 = VECTOR('',#114052,1.); +#114052 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114053 = ORIENTED_EDGE('',*,*,#114054,.T.); +#114054 = EDGE_CURVE('',#114047,#114055,#114057,.T.); +#114055 = VERTEX_POINT('',#114056); +#114056 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114057 = LINE('',#114058,#114059); +#114058 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114059 = VECTOR('',#114060,1.); +#114060 = DIRECTION('',(0.,0.,-1.)); +#114061 = ORIENTED_EDGE('',*,*,#114062,.T.); +#114062 = EDGE_CURVE('',#114055,#114063,#114065,.T.); +#114063 = VERTEX_POINT('',#114064); +#114064 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114065 = LINE('',#114066,#114067); +#114066 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114067 = VECTOR('',#114068,1.); +#114068 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114069 = ORIENTED_EDGE('',*,*,#114070,.T.); +#114070 = EDGE_CURVE('',#114063,#114071,#114073,.T.); +#114071 = VERTEX_POINT('',#114072); +#114072 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114073 = LINE('',#114074,#114075); +#114074 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114075 = VECTOR('',#114076,1.); +#114076 = DIRECTION('',(0.,0.,1.)); +#114077 = ORIENTED_EDGE('',*,*,#114078,.T.); +#114078 = EDGE_CURVE('',#114071,#112609,#114079,.T.); +#114079 = LINE('',#114080,#114081); +#114080 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114081 = VECTOR('',#114082,1.); +#114082 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114083 = ORIENTED_EDGE('',*,*,#112616,.F.); +#114084 = ORIENTED_EDGE('',*,*,#114029,.T.); +#114085 = PLANE('',#114086); +#114086 = AXIS2_PLACEMENT_3D('',#114087,#114088,#114089); +#114087 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#114088 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114089 = DIRECTION('',(0.,0.,1.)); +#114090 = ADVANCED_FACE('',(#114091),#114109,.T.); +#114091 = FACE_BOUND('',#114092,.T.); +#114092 = EDGE_LOOP('',(#114093,#114101,#114107,#114108)); +#114093 = ORIENTED_EDGE('',*,*,#114094,.T.); +#114094 = EDGE_CURVE('',#114071,#114095,#114097,.T.); +#114095 = VERTEX_POINT('',#114096); +#114096 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#114097 = LINE('',#114098,#114099); +#114098 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114099 = VECTOR('',#114100,1.); +#114100 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114101 = ORIENTED_EDGE('',*,*,#114102,.T.); +#114102 = EDGE_CURVE('',#114095,#112601,#114103,.T.); +#114103 = LINE('',#114104,#114105); +#114104 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#114105 = VECTOR('',#114106,1.); +#114106 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114107 = ORIENTED_EDGE('',*,*,#112608,.F.); +#114108 = ORIENTED_EDGE('',*,*,#114078,.F.); +#114109 = PLANE('',#114110); +#114110 = AXIS2_PLACEMENT_3D('',#114111,#114112,#114113); +#114111 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114112 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114113 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114114 = ADVANCED_FACE('',(#114115),#114151,.F.); +#114115 = FACE_BOUND('',#114116,.F.); +#114116 = EDGE_LOOP('',(#114117,#114118,#114126,#114134,#114142,#114148, + #114149,#114150)); +#114117 = ORIENTED_EDGE('',*,*,#112696,.F.); +#114118 = ORIENTED_EDGE('',*,*,#114119,.T.); +#114119 = EDGE_CURVE('',#112689,#114120,#114122,.T.); +#114120 = VERTEX_POINT('',#114121); +#114121 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#114122 = LINE('',#114123,#114124); +#114123 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#114124 = VECTOR('',#114125,1.); +#114125 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114126 = ORIENTED_EDGE('',*,*,#114127,.T.); +#114127 = EDGE_CURVE('',#114120,#114128,#114130,.T.); +#114128 = VERTEX_POINT('',#114129); +#114129 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#114130 = LINE('',#114131,#114132); +#114131 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#114132 = VECTOR('',#114133,1.); +#114133 = DIRECTION('',(0.,0.,-1.)); +#114134 = ORIENTED_EDGE('',*,*,#114135,.T.); +#114135 = EDGE_CURVE('',#114128,#114136,#114138,.T.); +#114136 = VERTEX_POINT('',#114137); +#114137 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#114138 = LINE('',#114139,#114140); +#114139 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#114140 = VECTOR('',#114141,1.); +#114141 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114142 = ORIENTED_EDGE('',*,*,#114143,.T.); +#114143 = EDGE_CURVE('',#114136,#114095,#114144,.T.); +#114144 = LINE('',#114145,#114146); +#114145 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#114146 = VECTOR('',#114147,1.); +#114147 = DIRECTION('',(0.,0.,1.)); +#114148 = ORIENTED_EDGE('',*,*,#114102,.T.); +#114149 = ORIENTED_EDGE('',*,*,#112600,.F.); +#114150 = ORIENTED_EDGE('',*,*,#114014,.T.); +#114151 = PLANE('',#114152); +#114152 = AXIS2_PLACEMENT_3D('',#114153,#114154,#114155); +#114153 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#114154 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114155 = DIRECTION('',(0.,0.,1.)); +#114156 = ADVANCED_FACE('',(#114157),#114168,.T.); +#114157 = FACE_BOUND('',#114158,.T.); +#114158 = EDGE_LOOP('',(#114159,#114160,#114161,#114167)); +#114159 = ORIENTED_EDGE('',*,*,#112688,.T.); +#114160 = ORIENTED_EDGE('',*,*,#114119,.T.); +#114161 = ORIENTED_EDGE('',*,*,#114162,.F.); +#114162 = EDGE_CURVE('',#114047,#114120,#114163,.T.); +#114163 = LINE('',#114164,#114165); +#114164 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114165 = VECTOR('',#114166,1.); +#114166 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114167 = ORIENTED_EDGE('',*,*,#114046,.F.); +#114168 = PLANE('',#114169); +#114169 = AXIS2_PLACEMENT_3D('',#114170,#114171,#114172); +#114170 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#114171 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114172 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114173 = ADVANCED_FACE('',(#114174),#114185,.T.); +#114174 = FACE_BOUND('',#114175,.T.); +#114175 = EDGE_LOOP('',(#114176,#114177,#114178,#114179)); +#114176 = ORIENTED_EDGE('',*,*,#112864,.T.); +#114177 = ORIENTED_EDGE('',*,*,#112727,.T.); +#114178 = ORIENTED_EDGE('',*,*,#112752,.T.); +#114179 = ORIENTED_EDGE('',*,*,#114180,.T.); +#114180 = EDGE_CURVE('',#112753,#112857,#114181,.T.); +#114181 = LINE('',#114182,#114183); +#114182 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#114183 = VECTOR('',#114184,1.); +#114184 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114185 = PLANE('',#114186); +#114186 = AXIS2_PLACEMENT_3D('',#114187,#114188,#114189); +#114187 = CARTESIAN_POINT('',(-6.461035410391E-16,-5.08,0.9)); +#114188 = DIRECTION('',(0.,0.,1.)); +#114189 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114190 = ADVANCED_FACE('',(#114191),#114202,.T.); +#114191 = FACE_BOUND('',#114192,.T.); +#114192 = EDGE_LOOP('',(#114193,#114194,#114200,#114201)); +#114193 = ORIENTED_EDGE('',*,*,#112832,.T.); +#114194 = ORIENTED_EDGE('',*,*,#114195,.F.); +#114195 = EDGE_CURVE('',#112777,#112833,#114196,.T.); +#114196 = LINE('',#114197,#114198); +#114197 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#114198 = VECTOR('',#114199,1.); +#114199 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114200 = ORIENTED_EDGE('',*,*,#112784,.T.); +#114201 = ORIENTED_EDGE('',*,*,#112807,.T.); +#114202 = PLANE('',#114203); +#114203 = AXIS2_PLACEMENT_3D('',#114204,#114205,#114206); +#114204 = CARTESIAN_POINT('',(-6.461035410391E-16,-5.08,0.9)); +#114205 = DIRECTION('',(0.,0.,1.)); +#114206 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114207 = ADVANCED_FACE('',(#114208),#114251,.T.); +#114208 = FACE_BOUND('',#114209,.T.); +#114209 = EDGE_LOOP('',(#114210,#114211,#114219,#114227,#114235,#114243, + #114249,#114250)); +#114210 = ORIENTED_EDGE('',*,*,#112840,.F.); +#114211 = ORIENTED_EDGE('',*,*,#114212,.T.); +#114212 = EDGE_CURVE('',#112841,#114213,#114215,.T.); +#114213 = VERTEX_POINT('',#114214); +#114214 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114215 = LINE('',#114216,#114217); +#114216 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#114217 = VECTOR('',#114218,1.); +#114218 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114219 = ORIENTED_EDGE('',*,*,#114220,.T.); +#114220 = EDGE_CURVE('',#114213,#114221,#114223,.T.); +#114221 = VERTEX_POINT('',#114222); +#114222 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114223 = LINE('',#114224,#114225); +#114224 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114225 = VECTOR('',#114226,1.); +#114226 = DIRECTION('',(0.,0.,-1.)); +#114227 = ORIENTED_EDGE('',*,*,#114228,.T.); +#114228 = EDGE_CURVE('',#114221,#114229,#114231,.T.); +#114229 = VERTEX_POINT('',#114230); +#114230 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114231 = LINE('',#114232,#114233); +#114232 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114233 = VECTOR('',#114234,1.); +#114234 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114235 = ORIENTED_EDGE('',*,*,#114236,.T.); +#114236 = EDGE_CURVE('',#114229,#114237,#114239,.T.); +#114237 = VERTEX_POINT('',#114238); +#114238 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114239 = LINE('',#114240,#114241); +#114240 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114241 = VECTOR('',#114242,1.); +#114242 = DIRECTION('',(0.,0.,1.)); +#114243 = ORIENTED_EDGE('',*,*,#114244,.T.); +#114244 = EDGE_CURVE('',#114237,#112769,#114245,.T.); +#114245 = LINE('',#114246,#114247); +#114246 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114247 = VECTOR('',#114248,1.); +#114248 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114249 = ORIENTED_EDGE('',*,*,#112776,.F.); +#114250 = ORIENTED_EDGE('',*,*,#114195,.T.); +#114251 = PLANE('',#114252); +#114252 = AXIS2_PLACEMENT_3D('',#114253,#114254,#114255); +#114253 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#114254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114255 = DIRECTION('',(0.,0.,1.)); +#114256 = ADVANCED_FACE('',(#114257),#114275,.T.); +#114257 = FACE_BOUND('',#114258,.T.); +#114258 = EDGE_LOOP('',(#114259,#114267,#114273,#114274)); +#114259 = ORIENTED_EDGE('',*,*,#114260,.T.); +#114260 = EDGE_CURVE('',#114237,#114261,#114263,.T.); +#114261 = VERTEX_POINT('',#114262); +#114262 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#114263 = LINE('',#114264,#114265); +#114264 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114265 = VECTOR('',#114266,1.); +#114266 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114267 = ORIENTED_EDGE('',*,*,#114268,.T.); +#114268 = EDGE_CURVE('',#114261,#112761,#114269,.T.); +#114269 = LINE('',#114270,#114271); +#114270 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#114271 = VECTOR('',#114272,1.); +#114272 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114273 = ORIENTED_EDGE('',*,*,#112768,.F.); +#114274 = ORIENTED_EDGE('',*,*,#114244,.F.); +#114275 = PLANE('',#114276); +#114276 = AXIS2_PLACEMENT_3D('',#114277,#114278,#114279); +#114277 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114278 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114279 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114280 = ADVANCED_FACE('',(#114281),#114317,.F.); +#114281 = FACE_BOUND('',#114282,.F.); +#114282 = EDGE_LOOP('',(#114283,#114284,#114292,#114300,#114308,#114314, + #114315,#114316)); +#114283 = ORIENTED_EDGE('',*,*,#112856,.F.); +#114284 = ORIENTED_EDGE('',*,*,#114285,.T.); +#114285 = EDGE_CURVE('',#112849,#114286,#114288,.T.); +#114286 = VERTEX_POINT('',#114287); +#114287 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#114288 = LINE('',#114289,#114290); +#114289 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#114290 = VECTOR('',#114291,1.); +#114291 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114292 = ORIENTED_EDGE('',*,*,#114293,.T.); +#114293 = EDGE_CURVE('',#114286,#114294,#114296,.T.); +#114294 = VERTEX_POINT('',#114295); +#114295 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#114296 = LINE('',#114297,#114298); +#114297 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#114298 = VECTOR('',#114299,1.); +#114299 = DIRECTION('',(0.,0.,-1.)); +#114300 = ORIENTED_EDGE('',*,*,#114301,.T.); +#114301 = EDGE_CURVE('',#114294,#114302,#114304,.T.); +#114302 = VERTEX_POINT('',#114303); +#114303 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#114304 = LINE('',#114305,#114306); +#114305 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#114306 = VECTOR('',#114307,1.); +#114307 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114308 = ORIENTED_EDGE('',*,*,#114309,.T.); +#114309 = EDGE_CURVE('',#114302,#114261,#114310,.T.); +#114310 = LINE('',#114311,#114312); +#114311 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#114312 = VECTOR('',#114313,1.); +#114313 = DIRECTION('',(0.,0.,1.)); +#114314 = ORIENTED_EDGE('',*,*,#114268,.T.); +#114315 = ORIENTED_EDGE('',*,*,#112760,.F.); +#114316 = ORIENTED_EDGE('',*,*,#114180,.T.); +#114317 = PLANE('',#114318); +#114318 = AXIS2_PLACEMENT_3D('',#114319,#114320,#114321); +#114319 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#114320 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114321 = DIRECTION('',(0.,0.,1.)); +#114322 = ADVANCED_FACE('',(#114323),#114334,.T.); +#114323 = FACE_BOUND('',#114324,.T.); +#114324 = EDGE_LOOP('',(#114325,#114326,#114327,#114333)); +#114325 = ORIENTED_EDGE('',*,*,#112848,.T.); +#114326 = ORIENTED_EDGE('',*,*,#114285,.T.); +#114327 = ORIENTED_EDGE('',*,*,#114328,.F.); +#114328 = EDGE_CURVE('',#114213,#114286,#114329,.T.); +#114329 = LINE('',#114330,#114331); +#114330 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114331 = VECTOR('',#114332,1.); +#114332 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114333 = ORIENTED_EDGE('',*,*,#114212,.F.); +#114334 = PLANE('',#114335); +#114335 = AXIS2_PLACEMENT_3D('',#114336,#114337,#114338); +#114336 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#114337 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114338 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114339 = ADVANCED_FACE('',(#114340),#114351,.T.); +#114340 = FACE_BOUND('',#114341,.T.); +#114341 = EDGE_LOOP('',(#114342,#114343,#114344,#114345)); +#114342 = ORIENTED_EDGE('',*,*,#113024,.T.); +#114343 = ORIENTED_EDGE('',*,*,#112887,.T.); +#114344 = ORIENTED_EDGE('',*,*,#112912,.T.); +#114345 = ORIENTED_EDGE('',*,*,#114346,.T.); +#114346 = EDGE_CURVE('',#112913,#113017,#114347,.T.); +#114347 = LINE('',#114348,#114349); +#114348 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#114349 = VECTOR('',#114350,1.); +#114350 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114351 = PLANE('',#114352); +#114352 = AXIS2_PLACEMENT_3D('',#114353,#114354,#114355); +#114353 = CARTESIAN_POINT('',(-3.641068927844E-16,-2.54,0.9)); +#114354 = DIRECTION('',(0.,0.,1.)); +#114355 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114356 = ADVANCED_FACE('',(#114357),#114368,.T.); +#114357 = FACE_BOUND('',#114358,.T.); +#114358 = EDGE_LOOP('',(#114359,#114360,#114366,#114367)); +#114359 = ORIENTED_EDGE('',*,*,#112992,.T.); +#114360 = ORIENTED_EDGE('',*,*,#114361,.F.); +#114361 = EDGE_CURVE('',#112937,#112993,#114362,.T.); +#114362 = LINE('',#114363,#114364); +#114363 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#114364 = VECTOR('',#114365,1.); +#114365 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114366 = ORIENTED_EDGE('',*,*,#112944,.T.); +#114367 = ORIENTED_EDGE('',*,*,#112967,.T.); +#114368 = PLANE('',#114369); +#114369 = AXIS2_PLACEMENT_3D('',#114370,#114371,#114372); +#114370 = CARTESIAN_POINT('',(-3.641068927844E-16,-2.54,0.9)); +#114371 = DIRECTION('',(0.,0.,1.)); +#114372 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114373 = ADVANCED_FACE('',(#114374),#114417,.T.); +#114374 = FACE_BOUND('',#114375,.T.); +#114375 = EDGE_LOOP('',(#114376,#114377,#114385,#114393,#114401,#114409, + #114415,#114416)); +#114376 = ORIENTED_EDGE('',*,*,#113000,.F.); +#114377 = ORIENTED_EDGE('',*,*,#114378,.T.); +#114378 = EDGE_CURVE('',#113001,#114379,#114381,.T.); +#114379 = VERTEX_POINT('',#114380); +#114380 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114381 = LINE('',#114382,#114383); +#114382 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#114383 = VECTOR('',#114384,1.); +#114384 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114385 = ORIENTED_EDGE('',*,*,#114386,.T.); +#114386 = EDGE_CURVE('',#114379,#114387,#114389,.T.); +#114387 = VERTEX_POINT('',#114388); +#114388 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114389 = LINE('',#114390,#114391); +#114390 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114391 = VECTOR('',#114392,1.); +#114392 = DIRECTION('',(0.,0.,-1.)); +#114393 = ORIENTED_EDGE('',*,*,#114394,.T.); +#114394 = EDGE_CURVE('',#114387,#114395,#114397,.T.); +#114395 = VERTEX_POINT('',#114396); +#114396 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114397 = LINE('',#114398,#114399); +#114398 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114399 = VECTOR('',#114400,1.); +#114400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114401 = ORIENTED_EDGE('',*,*,#114402,.T.); +#114402 = EDGE_CURVE('',#114395,#114403,#114405,.T.); +#114403 = VERTEX_POINT('',#114404); +#114404 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114405 = LINE('',#114406,#114407); +#114406 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114407 = VECTOR('',#114408,1.); +#114408 = DIRECTION('',(0.,0.,1.)); +#114409 = ORIENTED_EDGE('',*,*,#114410,.T.); +#114410 = EDGE_CURVE('',#114403,#112929,#114411,.T.); +#114411 = LINE('',#114412,#114413); +#114412 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114413 = VECTOR('',#114414,1.); +#114414 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114415 = ORIENTED_EDGE('',*,*,#112936,.F.); +#114416 = ORIENTED_EDGE('',*,*,#114361,.T.); +#114417 = PLANE('',#114418); +#114418 = AXIS2_PLACEMENT_3D('',#114419,#114420,#114421); +#114419 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#114420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114421 = DIRECTION('',(0.,0.,1.)); +#114422 = ADVANCED_FACE('',(#114423),#114441,.T.); +#114423 = FACE_BOUND('',#114424,.T.); +#114424 = EDGE_LOOP('',(#114425,#114433,#114439,#114440)); +#114425 = ORIENTED_EDGE('',*,*,#114426,.T.); +#114426 = EDGE_CURVE('',#114403,#114427,#114429,.T.); +#114427 = VERTEX_POINT('',#114428); +#114428 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#114429 = LINE('',#114430,#114431); +#114430 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114431 = VECTOR('',#114432,1.); +#114432 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114433 = ORIENTED_EDGE('',*,*,#114434,.T.); +#114434 = EDGE_CURVE('',#114427,#112921,#114435,.T.); +#114435 = LINE('',#114436,#114437); +#114436 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#114437 = VECTOR('',#114438,1.); +#114438 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114439 = ORIENTED_EDGE('',*,*,#112928,.F.); +#114440 = ORIENTED_EDGE('',*,*,#114410,.F.); +#114441 = PLANE('',#114442); +#114442 = AXIS2_PLACEMENT_3D('',#114443,#114444,#114445); +#114443 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114444 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114445 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114446 = ADVANCED_FACE('',(#114447),#114483,.F.); +#114447 = FACE_BOUND('',#114448,.F.); +#114448 = EDGE_LOOP('',(#114449,#114450,#114458,#114466,#114474,#114480, + #114481,#114482)); +#114449 = ORIENTED_EDGE('',*,*,#113016,.F.); +#114450 = ORIENTED_EDGE('',*,*,#114451,.T.); +#114451 = EDGE_CURVE('',#113009,#114452,#114454,.T.); +#114452 = VERTEX_POINT('',#114453); +#114453 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#114454 = LINE('',#114455,#114456); +#114455 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#114456 = VECTOR('',#114457,1.); +#114457 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114458 = ORIENTED_EDGE('',*,*,#114459,.T.); +#114459 = EDGE_CURVE('',#114452,#114460,#114462,.T.); +#114460 = VERTEX_POINT('',#114461); +#114461 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#114462 = LINE('',#114463,#114464); +#114463 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#114464 = VECTOR('',#114465,1.); +#114465 = DIRECTION('',(0.,0.,-1.)); +#114466 = ORIENTED_EDGE('',*,*,#114467,.T.); +#114467 = EDGE_CURVE('',#114460,#114468,#114470,.T.); +#114468 = VERTEX_POINT('',#114469); +#114469 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#114470 = LINE('',#114471,#114472); +#114471 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#114472 = VECTOR('',#114473,1.); +#114473 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114474 = ORIENTED_EDGE('',*,*,#114475,.T.); +#114475 = EDGE_CURVE('',#114468,#114427,#114476,.T.); +#114476 = LINE('',#114477,#114478); +#114477 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#114478 = VECTOR('',#114479,1.); +#114479 = DIRECTION('',(0.,0.,1.)); +#114480 = ORIENTED_EDGE('',*,*,#114434,.T.); +#114481 = ORIENTED_EDGE('',*,*,#112920,.F.); +#114482 = ORIENTED_EDGE('',*,*,#114346,.T.); +#114483 = PLANE('',#114484); +#114484 = AXIS2_PLACEMENT_3D('',#114485,#114486,#114487); +#114485 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#114486 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114487 = DIRECTION('',(0.,0.,1.)); +#114488 = ADVANCED_FACE('',(#114489),#114500,.T.); +#114489 = FACE_BOUND('',#114490,.T.); +#114490 = EDGE_LOOP('',(#114491,#114492,#114493,#114499)); +#114491 = ORIENTED_EDGE('',*,*,#113008,.T.); +#114492 = ORIENTED_EDGE('',*,*,#114451,.T.); +#114493 = ORIENTED_EDGE('',*,*,#114494,.F.); +#114494 = EDGE_CURVE('',#114379,#114452,#114495,.T.); +#114495 = LINE('',#114496,#114497); +#114496 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114497 = VECTOR('',#114498,1.); +#114498 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114499 = ORIENTED_EDGE('',*,*,#114378,.F.); +#114500 = PLANE('',#114501); +#114501 = AXIS2_PLACEMENT_3D('',#114502,#114503,#114504); +#114502 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#114503 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114504 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114505 = ADVANCED_FACE('',(#114506),#114517,.T.); +#114506 = FACE_BOUND('',#114507,.T.); +#114507 = EDGE_LOOP('',(#114508,#114509,#114510,#114511)); +#114508 = ORIENTED_EDGE('',*,*,#113184,.T.); +#114509 = ORIENTED_EDGE('',*,*,#113047,.T.); +#114510 = ORIENTED_EDGE('',*,*,#113072,.T.); +#114511 = ORIENTED_EDGE('',*,*,#114512,.T.); +#114512 = EDGE_CURVE('',#113073,#113177,#114513,.T.); +#114513 = LINE('',#114514,#114515); +#114514 = CARTESIAN_POINT('',(0.1,4.329869796038E-16,0.9)); +#114515 = VECTOR('',#114516,1.); +#114516 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114517 = PLANE('',#114518); +#114518 = AXIS2_PLACEMENT_3D('',#114519,#114520,#114521); +#114519 = CARTESIAN_POINT('',(-8.211024452957E-17,8.881784197001E-16,0.9 + )); +#114520 = DIRECTION('',(0.,0.,1.)); +#114521 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114522 = ADVANCED_FACE('',(#114523),#114534,.T.); +#114523 = FACE_BOUND('',#114524,.T.); +#114524 = EDGE_LOOP('',(#114525,#114526,#114532,#114533)); +#114525 = ORIENTED_EDGE('',*,*,#113152,.T.); +#114526 = ORIENTED_EDGE('',*,*,#114527,.F.); +#114527 = EDGE_CURVE('',#113097,#113153,#114528,.T.); +#114528 = LINE('',#114529,#114530); +#114529 = CARTESIAN_POINT('',(-0.1,4.551914400963E-16,0.9)); +#114530 = VECTOR('',#114531,1.); +#114531 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114532 = ORIENTED_EDGE('',*,*,#113104,.T.); +#114533 = ORIENTED_EDGE('',*,*,#113127,.T.); +#114534 = PLANE('',#114535); +#114535 = AXIS2_PLACEMENT_3D('',#114536,#114537,#114538); +#114536 = CARTESIAN_POINT('',(-8.211024452957E-17,8.881784197001E-16,0.9 + )); +#114537 = DIRECTION('',(0.,0.,1.)); +#114538 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114539 = ADVANCED_FACE('',(#114540),#114583,.T.); +#114540 = FACE_BOUND('',#114541,.T.); +#114541 = EDGE_LOOP('',(#114542,#114543,#114551,#114559,#114567,#114575, + #114581,#114582)); +#114542 = ORIENTED_EDGE('',*,*,#113160,.F.); +#114543 = ORIENTED_EDGE('',*,*,#114544,.T.); +#114544 = EDGE_CURVE('',#113161,#114545,#114547,.T.); +#114545 = VERTEX_POINT('',#114546); +#114546 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114547 = LINE('',#114548,#114549); +#114548 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#114549 = VECTOR('',#114550,1.); +#114550 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114551 = ORIENTED_EDGE('',*,*,#114552,.T.); +#114552 = EDGE_CURVE('',#114545,#114553,#114555,.T.); +#114553 = VERTEX_POINT('',#114554); +#114554 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114555 = LINE('',#114556,#114557); +#114556 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114557 = VECTOR('',#114558,1.); +#114558 = DIRECTION('',(0.,0.,-1.)); +#114559 = ORIENTED_EDGE('',*,*,#114560,.T.); +#114560 = EDGE_CURVE('',#114553,#114561,#114563,.T.); +#114561 = VERTEX_POINT('',#114562); +#114562 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114563 = LINE('',#114564,#114565); +#114564 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114565 = VECTOR('',#114566,1.); +#114566 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114567 = ORIENTED_EDGE('',*,*,#114568,.T.); +#114568 = EDGE_CURVE('',#114561,#114569,#114571,.T.); +#114569 = VERTEX_POINT('',#114570); +#114570 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114571 = LINE('',#114572,#114573); +#114572 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114573 = VECTOR('',#114574,1.); +#114574 = DIRECTION('',(0.,0.,1.)); +#114575 = ORIENTED_EDGE('',*,*,#114576,.T.); +#114576 = EDGE_CURVE('',#114569,#113089,#114577,.T.); +#114577 = LINE('',#114578,#114579); +#114578 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114579 = VECTOR('',#114580,1.); +#114580 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114581 = ORIENTED_EDGE('',*,*,#113096,.F.); +#114582 = ORIENTED_EDGE('',*,*,#114527,.T.); +#114583 = PLANE('',#114584); +#114584 = AXIS2_PLACEMENT_3D('',#114585,#114586,#114587); +#114585 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#114586 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114587 = DIRECTION('',(0.,0.,1.)); +#114588 = ADVANCED_FACE('',(#114589),#114607,.T.); +#114589 = FACE_BOUND('',#114590,.T.); +#114590 = EDGE_LOOP('',(#114591,#114599,#114605,#114606)); +#114591 = ORIENTED_EDGE('',*,*,#114592,.T.); +#114592 = EDGE_CURVE('',#114569,#114593,#114595,.T.); +#114593 = VERTEX_POINT('',#114594); +#114594 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#114595 = LINE('',#114596,#114597); +#114596 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114597 = VECTOR('',#114598,1.); +#114598 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114599 = ORIENTED_EDGE('',*,*,#114600,.T.); +#114600 = EDGE_CURVE('',#114593,#113081,#114601,.T.); +#114601 = LINE('',#114602,#114603); +#114602 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#114603 = VECTOR('',#114604,1.); +#114604 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114605 = ORIENTED_EDGE('',*,*,#113088,.F.); +#114606 = ORIENTED_EDGE('',*,*,#114576,.F.); +#114607 = PLANE('',#114608); +#114608 = AXIS2_PLACEMENT_3D('',#114609,#114610,#114611); +#114609 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114610 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114611 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114612 = ADVANCED_FACE('',(#114613),#114649,.F.); +#114613 = FACE_BOUND('',#114614,.F.); +#114614 = EDGE_LOOP('',(#114615,#114616,#114624,#114632,#114640,#114646, + #114647,#114648)); +#114615 = ORIENTED_EDGE('',*,*,#113176,.F.); +#114616 = ORIENTED_EDGE('',*,*,#114617,.T.); +#114617 = EDGE_CURVE('',#113169,#114618,#114620,.T.); +#114618 = VERTEX_POINT('',#114619); +#114619 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#114620 = LINE('',#114621,#114622); +#114621 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#114622 = VECTOR('',#114623,1.); +#114623 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114624 = ORIENTED_EDGE('',*,*,#114625,.T.); +#114625 = EDGE_CURVE('',#114618,#114626,#114628,.T.); +#114626 = VERTEX_POINT('',#114627); +#114627 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#114628 = LINE('',#114629,#114630); +#114629 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#114630 = VECTOR('',#114631,1.); +#114631 = DIRECTION('',(0.,0.,-1.)); +#114632 = ORIENTED_EDGE('',*,*,#114633,.T.); +#114633 = EDGE_CURVE('',#114626,#114634,#114636,.T.); +#114634 = VERTEX_POINT('',#114635); +#114635 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#114636 = LINE('',#114637,#114638); +#114637 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#114638 = VECTOR('',#114639,1.); +#114639 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114640 = ORIENTED_EDGE('',*,*,#114641,.T.); +#114641 = EDGE_CURVE('',#114634,#114593,#114642,.T.); +#114642 = LINE('',#114643,#114644); +#114643 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#114644 = VECTOR('',#114645,1.); +#114645 = DIRECTION('',(0.,0.,1.)); +#114646 = ORIENTED_EDGE('',*,*,#114600,.T.); +#114647 = ORIENTED_EDGE('',*,*,#113080,.F.); +#114648 = ORIENTED_EDGE('',*,*,#114512,.T.); +#114649 = PLANE('',#114650); +#114650 = AXIS2_PLACEMENT_3D('',#114651,#114652,#114653); +#114651 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#114652 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114653 = DIRECTION('',(0.,0.,1.)); +#114654 = ADVANCED_FACE('',(#114655),#114666,.T.); +#114655 = FACE_BOUND('',#114656,.T.); +#114656 = EDGE_LOOP('',(#114657,#114658,#114659,#114665)); +#114657 = ORIENTED_EDGE('',*,*,#113168,.T.); +#114658 = ORIENTED_EDGE('',*,*,#114617,.T.); +#114659 = ORIENTED_EDGE('',*,*,#114660,.F.); +#114660 = EDGE_CURVE('',#114545,#114618,#114661,.T.); +#114661 = LINE('',#114662,#114663); +#114662 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114663 = VECTOR('',#114664,1.); +#114664 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114665 = ORIENTED_EDGE('',*,*,#114544,.F.); +#114666 = PLANE('',#114667); +#114667 = AXIS2_PLACEMENT_3D('',#114668,#114669,#114670); +#114668 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#114669 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114670 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114671 = ADVANCED_FACE('',(#114672),#114683,.T.); +#114672 = FACE_BOUND('',#114673,.T.); +#114673 = EDGE_LOOP('',(#114674,#114680,#114681,#114682)); +#114674 = ORIENTED_EDGE('',*,*,#114675,.T.); +#114675 = EDGE_CURVE('',#113731,#113804,#114676,.T.); +#114676 = LINE('',#114677,#114678); +#114677 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#114678 = VECTOR('',#114679,1.); +#114679 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114680 = ORIENTED_EDGE('',*,*,#113811,.T.); +#114681 = ORIENTED_EDGE('',*,*,#113762,.F.); +#114682 = ORIENTED_EDGE('',*,*,#113738,.F.); +#114683 = PLANE('',#114684); +#114684 = AXIS2_PLACEMENT_3D('',#114685,#114686,#114687); +#114685 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#114686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114687 = DIRECTION('',(0.,0.,1.)); +#114688 = ADVANCED_FACE('',(#114689),#114700,.T.); +#114689 = FACE_BOUND('',#114690,.T.); +#114690 = EDGE_LOOP('',(#114691,#114697,#114698,#114699)); +#114691 = ORIENTED_EDGE('',*,*,#114692,.T.); +#114692 = EDGE_CURVE('',#113723,#113796,#114693,.T.); +#114693 = LINE('',#114694,#114695); +#114694 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#114695 = VECTOR('',#114696,1.); +#114696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114697 = ORIENTED_EDGE('',*,*,#113803,.T.); +#114698 = ORIENTED_EDGE('',*,*,#114675,.F.); +#114699 = ORIENTED_EDGE('',*,*,#113730,.F.); +#114700 = PLANE('',#114701); +#114701 = AXIS2_PLACEMENT_3D('',#114702,#114703,#114704); +#114702 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#114703 = DIRECTION('',(0.,0.,1.)); +#114704 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114705 = ADVANCED_FACE('',(#114706),#114712,.T.); +#114706 = FACE_BOUND('',#114707,.T.); +#114707 = EDGE_LOOP('',(#114708,#114709,#114710,#114711)); +#114708 = ORIENTED_EDGE('',*,*,#113830,.T.); +#114709 = ORIENTED_EDGE('',*,*,#113795,.T.); +#114710 = ORIENTED_EDGE('',*,*,#114692,.F.); +#114711 = ORIENTED_EDGE('',*,*,#113722,.F.); +#114712 = PLANE('',#114713); +#114713 = AXIS2_PLACEMENT_3D('',#114714,#114715,#114716); +#114714 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#114715 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114716 = DIRECTION('',(0.,0.,-1.)); +#114717 = ADVANCED_FACE('',(#114718),#114729,.T.); +#114718 = FACE_BOUND('',#114719,.T.); +#114719 = EDGE_LOOP('',(#114720,#114726,#114727,#114728)); +#114720 = ORIENTED_EDGE('',*,*,#114721,.T.); +#114721 = EDGE_CURVE('',#113897,#113970,#114722,.T.); +#114722 = LINE('',#114723,#114724); +#114723 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#114724 = VECTOR('',#114725,1.); +#114725 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114726 = ORIENTED_EDGE('',*,*,#113977,.T.); +#114727 = ORIENTED_EDGE('',*,*,#113928,.F.); +#114728 = ORIENTED_EDGE('',*,*,#113904,.F.); +#114729 = PLANE('',#114730); +#114730 = AXIS2_PLACEMENT_3D('',#114731,#114732,#114733); +#114731 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#114732 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114733 = DIRECTION('',(0.,0.,1.)); +#114734 = ADVANCED_FACE('',(#114735),#114746,.T.); +#114735 = FACE_BOUND('',#114736,.T.); +#114736 = EDGE_LOOP('',(#114737,#114743,#114744,#114745)); +#114737 = ORIENTED_EDGE('',*,*,#114738,.T.); +#114738 = EDGE_CURVE('',#113889,#113962,#114739,.T.); +#114739 = LINE('',#114740,#114741); +#114740 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#114741 = VECTOR('',#114742,1.); +#114742 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114743 = ORIENTED_EDGE('',*,*,#113969,.T.); +#114744 = ORIENTED_EDGE('',*,*,#114721,.F.); +#114745 = ORIENTED_EDGE('',*,*,#113896,.F.); +#114746 = PLANE('',#114747); +#114747 = AXIS2_PLACEMENT_3D('',#114748,#114749,#114750); +#114748 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#114749 = DIRECTION('',(0.,0.,1.)); +#114750 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114751 = ADVANCED_FACE('',(#114752),#114758,.T.); +#114752 = FACE_BOUND('',#114753,.T.); +#114753 = EDGE_LOOP('',(#114754,#114755,#114756,#114757)); +#114754 = ORIENTED_EDGE('',*,*,#113996,.T.); +#114755 = ORIENTED_EDGE('',*,*,#113961,.T.); +#114756 = ORIENTED_EDGE('',*,*,#114738,.F.); +#114757 = ORIENTED_EDGE('',*,*,#113888,.F.); +#114758 = PLANE('',#114759); +#114759 = AXIS2_PLACEMENT_3D('',#114760,#114761,#114762); +#114760 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#114761 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114762 = DIRECTION('',(0.,0.,-1.)); +#114763 = ADVANCED_FACE('',(#114764),#114775,.T.); +#114764 = FACE_BOUND('',#114765,.T.); +#114765 = EDGE_LOOP('',(#114766,#114772,#114773,#114774)); +#114766 = ORIENTED_EDGE('',*,*,#114767,.T.); +#114767 = EDGE_CURVE('',#114063,#114136,#114768,.T.); +#114768 = LINE('',#114769,#114770); +#114769 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114770 = VECTOR('',#114771,1.); +#114771 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114772 = ORIENTED_EDGE('',*,*,#114143,.T.); +#114773 = ORIENTED_EDGE('',*,*,#114094,.F.); +#114774 = ORIENTED_EDGE('',*,*,#114070,.F.); +#114775 = PLANE('',#114776); +#114776 = AXIS2_PLACEMENT_3D('',#114777,#114778,#114779); +#114777 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114778 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114779 = DIRECTION('',(0.,0.,1.)); +#114780 = ADVANCED_FACE('',(#114781),#114792,.T.); +#114781 = FACE_BOUND('',#114782,.T.); +#114782 = EDGE_LOOP('',(#114783,#114789,#114790,#114791)); +#114783 = ORIENTED_EDGE('',*,*,#114784,.T.); +#114784 = EDGE_CURVE('',#114055,#114128,#114785,.T.); +#114785 = LINE('',#114786,#114787); +#114786 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114787 = VECTOR('',#114788,1.); +#114788 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114789 = ORIENTED_EDGE('',*,*,#114135,.T.); +#114790 = ORIENTED_EDGE('',*,*,#114767,.F.); +#114791 = ORIENTED_EDGE('',*,*,#114062,.F.); +#114792 = PLANE('',#114793); +#114793 = AXIS2_PLACEMENT_3D('',#114794,#114795,#114796); +#114794 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114795 = DIRECTION('',(0.,0.,1.)); +#114796 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114797 = ADVANCED_FACE('',(#114798),#114804,.T.); +#114798 = FACE_BOUND('',#114799,.T.); +#114799 = EDGE_LOOP('',(#114800,#114801,#114802,#114803)); +#114800 = ORIENTED_EDGE('',*,*,#114162,.T.); +#114801 = ORIENTED_EDGE('',*,*,#114127,.T.); +#114802 = ORIENTED_EDGE('',*,*,#114784,.F.); +#114803 = ORIENTED_EDGE('',*,*,#114054,.F.); +#114804 = PLANE('',#114805); +#114805 = AXIS2_PLACEMENT_3D('',#114806,#114807,#114808); +#114806 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114807 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114808 = DIRECTION('',(0.,0.,-1.)); +#114809 = ADVANCED_FACE('',(#114810),#114821,.T.); +#114810 = FACE_BOUND('',#114811,.T.); +#114811 = EDGE_LOOP('',(#114812,#114818,#114819,#114820)); +#114812 = ORIENTED_EDGE('',*,*,#114813,.T.); +#114813 = EDGE_CURVE('',#114229,#114302,#114814,.T.); +#114814 = LINE('',#114815,#114816); +#114815 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114816 = VECTOR('',#114817,1.); +#114817 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114818 = ORIENTED_EDGE('',*,*,#114309,.T.); +#114819 = ORIENTED_EDGE('',*,*,#114260,.F.); +#114820 = ORIENTED_EDGE('',*,*,#114236,.F.); +#114821 = PLANE('',#114822); +#114822 = AXIS2_PLACEMENT_3D('',#114823,#114824,#114825); +#114823 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114824 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114825 = DIRECTION('',(0.,0.,1.)); +#114826 = ADVANCED_FACE('',(#114827),#114838,.T.); +#114827 = FACE_BOUND('',#114828,.T.); +#114828 = EDGE_LOOP('',(#114829,#114835,#114836,#114837)); +#114829 = ORIENTED_EDGE('',*,*,#114830,.T.); +#114830 = EDGE_CURVE('',#114221,#114294,#114831,.T.); +#114831 = LINE('',#114832,#114833); +#114832 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114833 = VECTOR('',#114834,1.); +#114834 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114835 = ORIENTED_EDGE('',*,*,#114301,.T.); +#114836 = ORIENTED_EDGE('',*,*,#114813,.F.); +#114837 = ORIENTED_EDGE('',*,*,#114228,.F.); +#114838 = PLANE('',#114839); +#114839 = AXIS2_PLACEMENT_3D('',#114840,#114841,#114842); +#114840 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114841 = DIRECTION('',(0.,0.,1.)); +#114842 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114843 = ADVANCED_FACE('',(#114844),#114850,.T.); +#114844 = FACE_BOUND('',#114845,.T.); +#114845 = EDGE_LOOP('',(#114846,#114847,#114848,#114849)); +#114846 = ORIENTED_EDGE('',*,*,#114328,.T.); +#114847 = ORIENTED_EDGE('',*,*,#114293,.T.); +#114848 = ORIENTED_EDGE('',*,*,#114830,.F.); +#114849 = ORIENTED_EDGE('',*,*,#114220,.F.); +#114850 = PLANE('',#114851); +#114851 = AXIS2_PLACEMENT_3D('',#114852,#114853,#114854); +#114852 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114853 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114854 = DIRECTION('',(0.,0.,-1.)); +#114855 = ADVANCED_FACE('',(#114856),#114867,.T.); +#114856 = FACE_BOUND('',#114857,.T.); +#114857 = EDGE_LOOP('',(#114858,#114864,#114865,#114866)); +#114858 = ORIENTED_EDGE('',*,*,#114859,.T.); +#114859 = EDGE_CURVE('',#114395,#114468,#114860,.T.); +#114860 = LINE('',#114861,#114862); +#114861 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114862 = VECTOR('',#114863,1.); +#114863 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114864 = ORIENTED_EDGE('',*,*,#114475,.T.); +#114865 = ORIENTED_EDGE('',*,*,#114426,.F.); +#114866 = ORIENTED_EDGE('',*,*,#114402,.F.); +#114867 = PLANE('',#114868); +#114868 = AXIS2_PLACEMENT_3D('',#114869,#114870,#114871); +#114869 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114870 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114871 = DIRECTION('',(0.,0.,1.)); +#114872 = ADVANCED_FACE('',(#114873),#114884,.T.); +#114873 = FACE_BOUND('',#114874,.T.); +#114874 = EDGE_LOOP('',(#114875,#114881,#114882,#114883)); +#114875 = ORIENTED_EDGE('',*,*,#114876,.T.); +#114876 = EDGE_CURVE('',#114387,#114460,#114877,.T.); +#114877 = LINE('',#114878,#114879); +#114878 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114879 = VECTOR('',#114880,1.); +#114880 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114881 = ORIENTED_EDGE('',*,*,#114467,.T.); +#114882 = ORIENTED_EDGE('',*,*,#114859,.F.); +#114883 = ORIENTED_EDGE('',*,*,#114394,.F.); +#114884 = PLANE('',#114885); +#114885 = AXIS2_PLACEMENT_3D('',#114886,#114887,#114888); +#114886 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114887 = DIRECTION('',(0.,0.,1.)); +#114888 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114889 = ADVANCED_FACE('',(#114890),#114896,.T.); +#114890 = FACE_BOUND('',#114891,.T.); +#114891 = EDGE_LOOP('',(#114892,#114893,#114894,#114895)); +#114892 = ORIENTED_EDGE('',*,*,#114494,.T.); +#114893 = ORIENTED_EDGE('',*,*,#114459,.T.); +#114894 = ORIENTED_EDGE('',*,*,#114876,.F.); +#114895 = ORIENTED_EDGE('',*,*,#114386,.F.); +#114896 = PLANE('',#114897); +#114897 = AXIS2_PLACEMENT_3D('',#114898,#114899,#114900); +#114898 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114899 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114900 = DIRECTION('',(0.,0.,-1.)); +#114901 = ADVANCED_FACE('',(#114902),#114913,.T.); +#114902 = FACE_BOUND('',#114903,.T.); +#114903 = EDGE_LOOP('',(#114904,#114910,#114911,#114912)); +#114904 = ORIENTED_EDGE('',*,*,#114905,.T.); +#114905 = EDGE_CURVE('',#114561,#114634,#114906,.T.); +#114906 = LINE('',#114907,#114908); +#114907 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114908 = VECTOR('',#114909,1.); +#114909 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114910 = ORIENTED_EDGE('',*,*,#114641,.T.); +#114911 = ORIENTED_EDGE('',*,*,#114592,.F.); +#114912 = ORIENTED_EDGE('',*,*,#114568,.F.); +#114913 = PLANE('',#114914); +#114914 = AXIS2_PLACEMENT_3D('',#114915,#114916,#114917); +#114915 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114917 = DIRECTION('',(0.,0.,1.)); +#114918 = ADVANCED_FACE('',(#114919),#114930,.T.); +#114919 = FACE_BOUND('',#114920,.T.); +#114920 = EDGE_LOOP('',(#114921,#114927,#114928,#114929)); +#114921 = ORIENTED_EDGE('',*,*,#114922,.T.); +#114922 = EDGE_CURVE('',#114553,#114626,#114923,.T.); +#114923 = LINE('',#114924,#114925); +#114924 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114925 = VECTOR('',#114926,1.); +#114926 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114927 = ORIENTED_EDGE('',*,*,#114633,.T.); +#114928 = ORIENTED_EDGE('',*,*,#114905,.F.); +#114929 = ORIENTED_EDGE('',*,*,#114560,.F.); +#114930 = PLANE('',#114931); +#114931 = AXIS2_PLACEMENT_3D('',#114932,#114933,#114934); +#114932 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114933 = DIRECTION('',(0.,0.,1.)); +#114934 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114935 = ADVANCED_FACE('',(#114936),#114942,.T.); +#114936 = FACE_BOUND('',#114937,.T.); +#114937 = EDGE_LOOP('',(#114938,#114939,#114940,#114941)); +#114938 = ORIENTED_EDGE('',*,*,#114660,.T.); +#114939 = ORIENTED_EDGE('',*,*,#114625,.T.); +#114940 = ORIENTED_EDGE('',*,*,#114922,.F.); +#114941 = ORIENTED_EDGE('',*,*,#114552,.F.); +#114942 = PLANE('',#114943); +#114943 = AXIS2_PLACEMENT_3D('',#114944,#114945,#114946); +#114944 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114945 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114946 = DIRECTION('',(0.,0.,-1.)); +#114947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#114951)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#114948,#114949,#114950)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#114948 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#114949 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#114950 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#114951 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#114948, + 'distance_accuracy_value','confusion accuracy'); +#114952 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#114953,#114955); +#114953 = ( REPRESENTATION_RELATIONSHIP('','',#110008,#109985) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#114954) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#114954 = ITEM_DEFINED_TRANSFORMATION('','',#11,#109986); +#114955 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #114956); +#114956 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('153','=>[0:1:1:66]','',#109980 + ,#110003,$); +#114957 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#110005)); +#114958 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#114959,#114961); +#114959 = ( REPRESENTATION_RELATIONSHIP('','',#103453,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#114960) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#114960 = ITEM_DEFINED_TRANSFORMATION('','',#11,#487); +#114961 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #114962); +#114962 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('155','MOD1','',#5,#103448,$); +#114963 = SHAPE_DEFINITION_REPRESENTATION(#114964,#114970); +#114964 = PRODUCT_DEFINITION_SHAPE('','',#114965); +#114965 = PRODUCT_DEFINITION('design','',#114966,#114969); +#114966 = PRODUCT_DEFINITION_FORMATION('','',#114967); +#114967 = PRODUCT('PinSocket_1x10_P2.54mm_Vertical', + 'PinSocket_1x10_P2.54mm_Vertical','',(#114968)); +#114968 = PRODUCT_CONTEXT('',#2,'mechanical'); +#114969 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#114970 = SHAPE_REPRESENTATION('',(#11,#114971),#114975); +#114971 = AXIS2_PLACEMENT_3D('',#114972,#114973,#114974); +#114972 = CARTESIAN_POINT('',(0.,0.,0.)); +#114973 = DIRECTION('',(0.,0.,1.)); +#114974 = DIRECTION('',(1.,0.,-0.)); +#114975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#114979)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#114976,#114977,#114978)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#114976 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#114977 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#114978 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#114979 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#114976, + 'distance_accuracy_value','confusion accuracy'); +#114980 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#114981,#114983); +#114981 = ( REPRESENTATION_RELATIONSHIP('','',#114970,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#114982) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#114982 = ITEM_DEFINED_TRANSFORMATION('','',#11,#491); +#114983 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #114984); +#114984 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('157','MOD1','',#5,#114965,$); +#114985 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#114967)); +#114986 = SHAPE_DEFINITION_REPRESENTATION(#114987,#114993); +#114987 = PRODUCT_DEFINITION_SHAPE('','',#114988); +#114988 = PRODUCT_DEFINITION('design','',#114989,#114992); +#114989 = PRODUCT_DEFINITION_FORMATION('','',#114990); +#114990 = PRODUCT('PinSocket_1x10_P2.54mm_Vertical', + 'PinSocket_1x10_P2.54mm_Vertical','',(#114991)); +#114991 = PRODUCT_CONTEXT('',#2,'mechanical'); +#114992 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#114993 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#114994),#123036); +#114994 = MANIFOLD_SOLID_BREP('',#114995); +#114995 = CLOSED_SHELL('',(#114996,#115036,#115099,#115162,#115179, + #115536,#115558,#115575,#116252,#116264,#116276,#116307,#116331, + #116355,#116372,#116403,#116427,#116451,#116468,#116499,#116523, + #116547,#116564,#116595,#116619,#116643,#116660,#116691,#116715, + #116739,#116756,#116787,#116811,#116835,#116852,#116883,#116907, + #116931,#116948,#116979,#117003,#117027,#117044,#117075,#117099, + #117123,#117140,#117171,#117195,#117219,#117236,#117253,#117300, + #117317,#117364,#117381,#117428,#117445,#117492,#117509,#117556, + #117573,#117620,#117637,#117684,#117701,#117748,#117765,#117812, + #117829,#117876,#117893,#117940,#117957,#118004,#118021,#118068, + #118085,#118132,#118149,#118196,#118213,#118260,#118277,#118324, + #118341,#118388,#118405,#118452,#118469,#118516,#118547,#118603, + #118627,#118676,#118707,#118763,#118787,#118836,#118867,#118923, + #118947,#118996,#119027,#119083,#119107,#119156,#119187,#119243, + #119267,#119316,#119347,#119403,#119427,#119476,#119507,#119563, + #119587,#119636,#119667,#119723,#119747,#119796,#119827,#119883, + #119907,#119956,#119987,#120043,#120067,#120116,#120133,#120150, + #120167,#120184,#120196,#120213,#120230,#120247,#120264,#120276, + #120293,#120310,#120327,#120344,#120356,#120373,#120390,#120407, + #120424,#120436,#120453,#120470,#120487,#120504,#120516,#120533, + #120550,#120567,#120584,#120596,#120613,#120630,#120647,#120664, + #120676,#120693,#120710,#120727,#120744,#120756,#120773,#120790, + #120807,#120824,#120836,#120853,#120870,#120887,#120904,#120916, + #120933,#120950,#120999,#121023,#121065,#121082,#121099,#121116, + #121165,#121189,#121231,#121248,#121265,#121282,#121331,#121355, + #121397,#121414,#121431,#121448,#121497,#121521,#121563,#121580, + #121597,#121614,#121663,#121687,#121729,#121746,#121763,#121780, + #121829,#121853,#121895,#121912,#121929,#121946,#121995,#122019, + #122061,#122078,#122095,#122112,#122161,#122185,#122227,#122244, + #122261,#122278,#122327,#122351,#122393,#122410,#122427,#122444, + #122493,#122517,#122559,#122576,#122593,#122610,#122622,#122639, + #122656,#122668,#122685,#122702,#122714,#122731,#122748,#122760, + #122777,#122794,#122806,#122823,#122840,#122852,#122869,#122886, + #122898,#122915,#122932,#122944,#122961,#122978,#122990,#123007, + #123024)); +#114996 = ADVANCED_FACE('',(#114997),#115031,.F.); +#114997 = FACE_BOUND('',#114998,.F.); +#114998 = EDGE_LOOP('',(#114999,#115009,#115017,#115025)); +#114999 = ORIENTED_EDGE('',*,*,#115000,.T.); +#115000 = EDGE_CURVE('',#115001,#115003,#115005,.T.); +#115001 = VERTEX_POINT('',#115002); +#115002 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115003 = VERTEX_POINT('',#115004); +#115004 = CARTESIAN_POINT('',(1.27,-24.13,8.5)); +#115005 = LINE('',#115006,#115007); +#115006 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115007 = VECTOR('',#115008,1.); +#115008 = DIRECTION('',(0.,0.,1.)); +#115009 = ORIENTED_EDGE('',*,*,#115010,.T.); +#115010 = EDGE_CURVE('',#115003,#115011,#115013,.T.); +#115011 = VERTEX_POINT('',#115012); +#115012 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#115013 = LINE('',#115014,#115015); +#115014 = CARTESIAN_POINT('',(1.27,-24.13,8.5)); +#115015 = VECTOR('',#115016,1.); +#115016 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115017 = ORIENTED_EDGE('',*,*,#115018,.F.); +#115018 = EDGE_CURVE('',#115019,#115011,#115021,.T.); +#115019 = VERTEX_POINT('',#115020); +#115020 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115021 = LINE('',#115022,#115023); +#115022 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115023 = VECTOR('',#115024,1.); +#115024 = DIRECTION('',(0.,0.,1.)); +#115025 = ORIENTED_EDGE('',*,*,#115026,.F.); +#115026 = EDGE_CURVE('',#115001,#115019,#115027,.T.); +#115027 = LINE('',#115028,#115029); +#115028 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115029 = VECTOR('',#115030,1.); +#115030 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115031 = PLANE('',#115032); +#115032 = AXIS2_PLACEMENT_3D('',#115033,#115034,#115035); +#115033 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115034 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115035 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115036 = ADVANCED_FACE('',(#115037),#115094,.F.); +#115037 = FACE_BOUND('',#115038,.F.); +#115038 = EDGE_LOOP('',(#115039,#115049,#115057,#115063,#115064,#115072, + #115080,#115088)); +#115039 = ORIENTED_EDGE('',*,*,#115040,.F.); +#115040 = EDGE_CURVE('',#115041,#115043,#115045,.T.); +#115041 = VERTEX_POINT('',#115042); +#115042 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115043 = VERTEX_POINT('',#115044); +#115044 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.)); +#115045 = LINE('',#115046,#115047); +#115046 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115047 = VECTOR('',#115048,1.); +#115048 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115049 = ORIENTED_EDGE('',*,*,#115050,.T.); +#115050 = EDGE_CURVE('',#115041,#115051,#115053,.T.); +#115051 = VERTEX_POINT('',#115052); +#115052 = CARTESIAN_POINT('',(-1.27,-24.13,8.5)); +#115053 = LINE('',#115054,#115055); +#115054 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115055 = VECTOR('',#115056,1.); +#115056 = DIRECTION('',(0.,0.,1.)); +#115057 = ORIENTED_EDGE('',*,*,#115058,.T.); +#115058 = EDGE_CURVE('',#115051,#115003,#115059,.T.); +#115059 = LINE('',#115060,#115061); +#115060 = CARTESIAN_POINT('',(-1.27,-24.13,8.5)); +#115061 = VECTOR('',#115062,1.); +#115062 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115063 = ORIENTED_EDGE('',*,*,#115000,.F.); +#115064 = ORIENTED_EDGE('',*,*,#115065,.F.); +#115065 = EDGE_CURVE('',#115066,#115001,#115068,.T.); +#115066 = VERTEX_POINT('',#115067); +#115067 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#115068 = LINE('',#115069,#115070); +#115069 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115070 = VECTOR('',#115071,1.); +#115071 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115072 = ORIENTED_EDGE('',*,*,#115073,.T.); +#115073 = EDGE_CURVE('',#115066,#115074,#115076,.T.); +#115074 = VERTEX_POINT('',#115075); +#115075 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.2)); +#115076 = LINE('',#115077,#115078); +#115077 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#115078 = VECTOR('',#115079,1.); +#115079 = DIRECTION('',(0.,0.,1.)); +#115080 = ORIENTED_EDGE('',*,*,#115081,.F.); +#115081 = EDGE_CURVE('',#115082,#115074,#115084,.T.); +#115082 = VERTEX_POINT('',#115083); +#115083 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.2)); +#115084 = LINE('',#115085,#115086); +#115085 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.2)); +#115086 = VECTOR('',#115087,1.); +#115087 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115088 = ORIENTED_EDGE('',*,*,#115089,.F.); +#115089 = EDGE_CURVE('',#115043,#115082,#115090,.T.); +#115090 = LINE('',#115091,#115092); +#115091 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.)); +#115092 = VECTOR('',#115093,1.); +#115093 = DIRECTION('',(0.,0.,1.)); +#115094 = PLANE('',#115095); +#115095 = AXIS2_PLACEMENT_3D('',#115096,#115097,#115098); +#115096 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115097 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115098 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115099 = ADVANCED_FACE('',(#115100),#115157,.F.); +#115100 = FACE_BOUND('',#115101,.F.); +#115101 = EDGE_LOOP('',(#115102,#115110,#115111,#115119,#115127,#115135, + #115143,#115151)); +#115102 = ORIENTED_EDGE('',*,*,#115103,.F.); +#115103 = EDGE_CURVE('',#115019,#115104,#115106,.T.); +#115104 = VERTEX_POINT('',#115105); +#115105 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#115106 = LINE('',#115107,#115108); +#115107 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115108 = VECTOR('',#115109,1.); +#115109 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115110 = ORIENTED_EDGE('',*,*,#115018,.T.); +#115111 = ORIENTED_EDGE('',*,*,#115112,.T.); +#115112 = EDGE_CURVE('',#115011,#115113,#115115,.T.); +#115113 = VERTEX_POINT('',#115114); +#115114 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#115115 = LINE('',#115116,#115117); +#115116 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#115117 = VECTOR('',#115118,1.); +#115118 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115119 = ORIENTED_EDGE('',*,*,#115120,.F.); +#115120 = EDGE_CURVE('',#115121,#115113,#115123,.T.); +#115121 = VERTEX_POINT('',#115122); +#115122 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#115123 = LINE('',#115124,#115125); +#115124 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#115125 = VECTOR('',#115126,1.); +#115126 = DIRECTION('',(0.,0.,1.)); +#115127 = ORIENTED_EDGE('',*,*,#115128,.F.); +#115128 = EDGE_CURVE('',#115129,#115121,#115131,.T.); +#115129 = VERTEX_POINT('',#115130); +#115130 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115131 = LINE('',#115132,#115133); +#115132 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115133 = VECTOR('',#115134,1.); +#115134 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115135 = ORIENTED_EDGE('',*,*,#115136,.T.); +#115136 = EDGE_CURVE('',#115129,#115137,#115139,.T.); +#115137 = VERTEX_POINT('',#115138); +#115138 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#115139 = LINE('',#115140,#115141); +#115140 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115141 = VECTOR('',#115142,1.); +#115142 = DIRECTION('',(0.,0.,1.)); +#115143 = ORIENTED_EDGE('',*,*,#115144,.F.); +#115144 = EDGE_CURVE('',#115145,#115137,#115147,.T.); +#115145 = VERTEX_POINT('',#115146); +#115146 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#115147 = LINE('',#115148,#115149); +#115148 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#115149 = VECTOR('',#115150,1.); +#115150 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115151 = ORIENTED_EDGE('',*,*,#115152,.F.); +#115152 = EDGE_CURVE('',#115104,#115145,#115153,.T.); +#115153 = LINE('',#115154,#115155); +#115154 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#115155 = VECTOR('',#115156,1.); +#115156 = DIRECTION('',(0.,0.,1.)); +#115157 = PLANE('',#115158); +#115158 = AXIS2_PLACEMENT_3D('',#115159,#115160,#115161); +#115159 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115160 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115161 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115162 = ADVANCED_FACE('',(#115163),#115174,.F.); +#115163 = FACE_BOUND('',#115164,.F.); +#115164 = EDGE_LOOP('',(#115165,#115166,#115167,#115168)); +#115165 = ORIENTED_EDGE('',*,*,#115065,.T.); +#115166 = ORIENTED_EDGE('',*,*,#115026,.T.); +#115167 = ORIENTED_EDGE('',*,*,#115103,.T.); +#115168 = ORIENTED_EDGE('',*,*,#115169,.F.); +#115169 = EDGE_CURVE('',#115066,#115104,#115170,.T.); +#115170 = LINE('',#115171,#115172); +#115171 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#115172 = VECTOR('',#115173,1.); +#115173 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115174 = PLANE('',#115175); +#115175 = AXIS2_PLACEMENT_3D('',#115176,#115177,#115178); +#115176 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,0.)); +#115177 = DIRECTION('',(0.,0.,1.)); +#115178 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#115179 = ADVANCED_FACE('',(#115180,#115191,#115225,#115259,#115293, + #115327,#115361,#115395,#115429,#115463,#115497),#115531,.T.); +#115180 = FACE_BOUND('',#115181,.T.); +#115181 = EDGE_LOOP('',(#115182,#115183,#115184,#115190)); +#115182 = ORIENTED_EDGE('',*,*,#115010,.T.); +#115183 = ORIENTED_EDGE('',*,*,#115112,.T.); +#115184 = ORIENTED_EDGE('',*,*,#115185,.T.); +#115185 = EDGE_CURVE('',#115113,#115051,#115186,.T.); +#115186 = LINE('',#115187,#115188); +#115187 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#115188 = VECTOR('',#115189,1.); +#115189 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115190 = ORIENTED_EDGE('',*,*,#115058,.T.); +#115191 = FACE_BOUND('',#115192,.T.); +#115192 = EDGE_LOOP('',(#115193,#115203,#115211,#115219)); +#115193 = ORIENTED_EDGE('',*,*,#115194,.F.); +#115194 = EDGE_CURVE('',#115195,#115197,#115199,.T.); +#115195 = VERTEX_POINT('',#115196); +#115196 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#115197 = VERTEX_POINT('',#115198); +#115198 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#115199 = LINE('',#115200,#115201); +#115200 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#115201 = VECTOR('',#115202,1.); +#115202 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115203 = ORIENTED_EDGE('',*,*,#115204,.F.); +#115204 = EDGE_CURVE('',#115205,#115195,#115207,.T.); +#115205 = VERTEX_POINT('',#115206); +#115206 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#115207 = LINE('',#115208,#115209); +#115208 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#115209 = VECTOR('',#115210,1.); +#115210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115211 = ORIENTED_EDGE('',*,*,#115212,.F.); +#115212 = EDGE_CURVE('',#115213,#115205,#115215,.T.); +#115213 = VERTEX_POINT('',#115214); +#115214 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#115215 = LINE('',#115216,#115217); +#115216 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#115217 = VECTOR('',#115218,1.); +#115218 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115219 = ORIENTED_EDGE('',*,*,#115220,.F.); +#115220 = EDGE_CURVE('',#115197,#115213,#115221,.T.); +#115221 = LINE('',#115222,#115223); +#115222 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#115223 = VECTOR('',#115224,1.); +#115224 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115225 = FACE_BOUND('',#115226,.T.); +#115226 = EDGE_LOOP('',(#115227,#115237,#115245,#115253)); +#115227 = ORIENTED_EDGE('',*,*,#115228,.F.); +#115228 = EDGE_CURVE('',#115229,#115231,#115233,.T.); +#115229 = VERTEX_POINT('',#115230); +#115230 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#115231 = VERTEX_POINT('',#115232); +#115232 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#115233 = LINE('',#115234,#115235); +#115234 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#115235 = VECTOR('',#115236,1.); +#115236 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115237 = ORIENTED_EDGE('',*,*,#115238,.F.); +#115238 = EDGE_CURVE('',#115239,#115229,#115241,.T.); +#115239 = VERTEX_POINT('',#115240); +#115240 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#115241 = LINE('',#115242,#115243); +#115242 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#115243 = VECTOR('',#115244,1.); +#115244 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115245 = ORIENTED_EDGE('',*,*,#115246,.F.); +#115246 = EDGE_CURVE('',#115247,#115239,#115249,.T.); +#115247 = VERTEX_POINT('',#115248); +#115248 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#115249 = LINE('',#115250,#115251); +#115250 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#115251 = VECTOR('',#115252,1.); +#115252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115253 = ORIENTED_EDGE('',*,*,#115254,.F.); +#115254 = EDGE_CURVE('',#115231,#115247,#115255,.T.); +#115255 = LINE('',#115256,#115257); +#115256 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#115257 = VECTOR('',#115258,1.); +#115258 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115259 = FACE_BOUND('',#115260,.T.); +#115260 = EDGE_LOOP('',(#115261,#115271,#115279,#115287)); +#115261 = ORIENTED_EDGE('',*,*,#115262,.F.); +#115262 = EDGE_CURVE('',#115263,#115265,#115267,.T.); +#115263 = VERTEX_POINT('',#115264); +#115264 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#115265 = VERTEX_POINT('',#115266); +#115266 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#115267 = LINE('',#115268,#115269); +#115268 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#115269 = VECTOR('',#115270,1.); +#115270 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115271 = ORIENTED_EDGE('',*,*,#115272,.F.); +#115272 = EDGE_CURVE('',#115273,#115263,#115275,.T.); +#115273 = VERTEX_POINT('',#115274); +#115274 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#115275 = LINE('',#115276,#115277); +#115276 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#115277 = VECTOR('',#115278,1.); +#115278 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115279 = ORIENTED_EDGE('',*,*,#115280,.F.); +#115280 = EDGE_CURVE('',#115281,#115273,#115283,.T.); +#115281 = VERTEX_POINT('',#115282); +#115282 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#115283 = LINE('',#115284,#115285); +#115284 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#115285 = VECTOR('',#115286,1.); +#115286 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115287 = ORIENTED_EDGE('',*,*,#115288,.F.); +#115288 = EDGE_CURVE('',#115265,#115281,#115289,.T.); +#115289 = LINE('',#115290,#115291); +#115290 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#115291 = VECTOR('',#115292,1.); +#115292 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115293 = FACE_BOUND('',#115294,.T.); +#115294 = EDGE_LOOP('',(#115295,#115305,#115313,#115321)); +#115295 = ORIENTED_EDGE('',*,*,#115296,.F.); +#115296 = EDGE_CURVE('',#115297,#115299,#115301,.T.); +#115297 = VERTEX_POINT('',#115298); +#115298 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#115299 = VERTEX_POINT('',#115300); +#115300 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#115301 = LINE('',#115302,#115303); +#115302 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#115303 = VECTOR('',#115304,1.); +#115304 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115305 = ORIENTED_EDGE('',*,*,#115306,.F.); +#115306 = EDGE_CURVE('',#115307,#115297,#115309,.T.); +#115307 = VERTEX_POINT('',#115308); +#115308 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#115309 = LINE('',#115310,#115311); +#115310 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#115311 = VECTOR('',#115312,1.); +#115312 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115313 = ORIENTED_EDGE('',*,*,#115314,.F.); +#115314 = EDGE_CURVE('',#115315,#115307,#115317,.T.); +#115315 = VERTEX_POINT('',#115316); +#115316 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#115317 = LINE('',#115318,#115319); +#115318 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#115319 = VECTOR('',#115320,1.); +#115320 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115321 = ORIENTED_EDGE('',*,*,#115322,.F.); +#115322 = EDGE_CURVE('',#115299,#115315,#115323,.T.); +#115323 = LINE('',#115324,#115325); +#115324 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#115325 = VECTOR('',#115326,1.); +#115326 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115327 = FACE_BOUND('',#115328,.T.); +#115328 = EDGE_LOOP('',(#115329,#115339,#115347,#115355)); +#115329 = ORIENTED_EDGE('',*,*,#115330,.F.); +#115330 = EDGE_CURVE('',#115331,#115333,#115335,.T.); +#115331 = VERTEX_POINT('',#115332); +#115332 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#115333 = VERTEX_POINT('',#115334); +#115334 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#115335 = LINE('',#115336,#115337); +#115336 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#115337 = VECTOR('',#115338,1.); +#115338 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115339 = ORIENTED_EDGE('',*,*,#115340,.F.); +#115340 = EDGE_CURVE('',#115341,#115331,#115343,.T.); +#115341 = VERTEX_POINT('',#115342); +#115342 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#115343 = LINE('',#115344,#115345); +#115344 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#115345 = VECTOR('',#115346,1.); +#115346 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115347 = ORIENTED_EDGE('',*,*,#115348,.F.); +#115348 = EDGE_CURVE('',#115349,#115341,#115351,.T.); +#115349 = VERTEX_POINT('',#115350); +#115350 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#115351 = LINE('',#115352,#115353); +#115352 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#115353 = VECTOR('',#115354,1.); +#115354 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115355 = ORIENTED_EDGE('',*,*,#115356,.F.); +#115356 = EDGE_CURVE('',#115333,#115349,#115357,.T.); +#115357 = LINE('',#115358,#115359); +#115358 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#115359 = VECTOR('',#115360,1.); +#115360 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115361 = FACE_BOUND('',#115362,.T.); +#115362 = EDGE_LOOP('',(#115363,#115373,#115381,#115389)); +#115363 = ORIENTED_EDGE('',*,*,#115364,.F.); +#115364 = EDGE_CURVE('',#115365,#115367,#115369,.T.); +#115365 = VERTEX_POINT('',#115366); +#115366 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#115367 = VERTEX_POINT('',#115368); +#115368 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#115369 = LINE('',#115370,#115371); +#115370 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#115371 = VECTOR('',#115372,1.); +#115372 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115373 = ORIENTED_EDGE('',*,*,#115374,.F.); +#115374 = EDGE_CURVE('',#115375,#115365,#115377,.T.); +#115375 = VERTEX_POINT('',#115376); +#115376 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#115377 = LINE('',#115378,#115379); +#115378 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#115379 = VECTOR('',#115380,1.); +#115380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115381 = ORIENTED_EDGE('',*,*,#115382,.F.); +#115382 = EDGE_CURVE('',#115383,#115375,#115385,.T.); +#115383 = VERTEX_POINT('',#115384); +#115384 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#115385 = LINE('',#115386,#115387); +#115386 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#115387 = VECTOR('',#115388,1.); +#115388 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115389 = ORIENTED_EDGE('',*,*,#115390,.F.); +#115390 = EDGE_CURVE('',#115367,#115383,#115391,.T.); +#115391 = LINE('',#115392,#115393); +#115392 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#115393 = VECTOR('',#115394,1.); +#115394 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115395 = FACE_BOUND('',#115396,.T.); +#115396 = EDGE_LOOP('',(#115397,#115407,#115415,#115423)); +#115397 = ORIENTED_EDGE('',*,*,#115398,.F.); +#115398 = EDGE_CURVE('',#115399,#115401,#115403,.T.); +#115399 = VERTEX_POINT('',#115400); +#115400 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#115401 = VERTEX_POINT('',#115402); +#115402 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#115403 = LINE('',#115404,#115405); +#115404 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#115405 = VECTOR('',#115406,1.); +#115406 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115407 = ORIENTED_EDGE('',*,*,#115408,.F.); +#115408 = EDGE_CURVE('',#115409,#115399,#115411,.T.); +#115409 = VERTEX_POINT('',#115410); +#115410 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#115411 = LINE('',#115412,#115413); +#115412 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#115413 = VECTOR('',#115414,1.); +#115414 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115415 = ORIENTED_EDGE('',*,*,#115416,.F.); +#115416 = EDGE_CURVE('',#115417,#115409,#115419,.T.); +#115417 = VERTEX_POINT('',#115418); +#115418 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#115419 = LINE('',#115420,#115421); +#115420 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#115421 = VECTOR('',#115422,1.); +#115422 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115423 = ORIENTED_EDGE('',*,*,#115424,.F.); +#115424 = EDGE_CURVE('',#115401,#115417,#115425,.T.); +#115425 = LINE('',#115426,#115427); +#115426 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#115427 = VECTOR('',#115428,1.); +#115428 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115429 = FACE_BOUND('',#115430,.T.); +#115430 = EDGE_LOOP('',(#115431,#115441,#115449,#115457)); +#115431 = ORIENTED_EDGE('',*,*,#115432,.F.); +#115432 = EDGE_CURVE('',#115433,#115435,#115437,.T.); +#115433 = VERTEX_POINT('',#115434); +#115434 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#115435 = VERTEX_POINT('',#115436); +#115436 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#115437 = LINE('',#115438,#115439); +#115438 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#115439 = VECTOR('',#115440,1.); +#115440 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115441 = ORIENTED_EDGE('',*,*,#115442,.F.); +#115442 = EDGE_CURVE('',#115443,#115433,#115445,.T.); +#115443 = VERTEX_POINT('',#115444); +#115444 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#115445 = LINE('',#115446,#115447); +#115446 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#115447 = VECTOR('',#115448,1.); +#115448 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115449 = ORIENTED_EDGE('',*,*,#115450,.F.); +#115450 = EDGE_CURVE('',#115451,#115443,#115453,.T.); +#115451 = VERTEX_POINT('',#115452); +#115452 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#115453 = LINE('',#115454,#115455); +#115454 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#115455 = VECTOR('',#115456,1.); +#115456 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115457 = ORIENTED_EDGE('',*,*,#115458,.F.); +#115458 = EDGE_CURVE('',#115435,#115451,#115459,.T.); +#115459 = LINE('',#115460,#115461); +#115460 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#115461 = VECTOR('',#115462,1.); +#115462 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115463 = FACE_BOUND('',#115464,.T.); +#115464 = EDGE_LOOP('',(#115465,#115475,#115483,#115491)); +#115465 = ORIENTED_EDGE('',*,*,#115466,.F.); +#115466 = EDGE_CURVE('',#115467,#115469,#115471,.T.); +#115467 = VERTEX_POINT('',#115468); +#115468 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#115469 = VERTEX_POINT('',#115470); +#115470 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#115471 = LINE('',#115472,#115473); +#115472 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#115473 = VECTOR('',#115474,1.); +#115474 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115475 = ORIENTED_EDGE('',*,*,#115476,.F.); +#115476 = EDGE_CURVE('',#115477,#115467,#115479,.T.); +#115477 = VERTEX_POINT('',#115478); +#115478 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#115479 = LINE('',#115480,#115481); +#115480 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#115481 = VECTOR('',#115482,1.); +#115482 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115483 = ORIENTED_EDGE('',*,*,#115484,.F.); +#115484 = EDGE_CURVE('',#115485,#115477,#115487,.T.); +#115485 = VERTEX_POINT('',#115486); +#115486 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#115487 = LINE('',#115488,#115489); +#115488 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#115489 = VECTOR('',#115490,1.); +#115490 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115491 = ORIENTED_EDGE('',*,*,#115492,.F.); +#115492 = EDGE_CURVE('',#115469,#115485,#115493,.T.); +#115493 = LINE('',#115494,#115495); +#115494 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#115495 = VECTOR('',#115496,1.); +#115496 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115497 = FACE_BOUND('',#115498,.T.); +#115498 = EDGE_LOOP('',(#115499,#115509,#115517,#115525)); +#115499 = ORIENTED_EDGE('',*,*,#115500,.F.); +#115500 = EDGE_CURVE('',#115501,#115503,#115505,.T.); +#115501 = VERTEX_POINT('',#115502); +#115502 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#115503 = VERTEX_POINT('',#115504); +#115504 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#115505 = LINE('',#115506,#115507); +#115506 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#115507 = VECTOR('',#115508,1.); +#115508 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115509 = ORIENTED_EDGE('',*,*,#115510,.F.); +#115510 = EDGE_CURVE('',#115511,#115501,#115513,.T.); +#115511 = VERTEX_POINT('',#115512); +#115512 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#115513 = LINE('',#115514,#115515); +#115514 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#115515 = VECTOR('',#115516,1.); +#115516 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115517 = ORIENTED_EDGE('',*,*,#115518,.F.); +#115518 = EDGE_CURVE('',#115519,#115511,#115521,.T.); +#115519 = VERTEX_POINT('',#115520); +#115520 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#115521 = LINE('',#115522,#115523); +#115522 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#115523 = VECTOR('',#115524,1.); +#115524 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115525 = ORIENTED_EDGE('',*,*,#115526,.F.); +#115526 = EDGE_CURVE('',#115503,#115519,#115527,.T.); +#115527 = LINE('',#115528,#115529); +#115528 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#115529 = VECTOR('',#115530,1.); +#115530 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115531 = PLANE('',#115532); +#115532 = AXIS2_PLACEMENT_3D('',#115533,#115534,#115535); +#115533 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,8.5)); +#115534 = DIRECTION('',(0.,0.,1.)); +#115535 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#115536 = ADVANCED_FACE('',(#115537),#115553,.F.); +#115537 = FACE_BOUND('',#115538,.F.); +#115538 = EDGE_LOOP('',(#115539,#115540,#115546,#115547)); +#115539 = ORIENTED_EDGE('',*,*,#115040,.T.); +#115540 = ORIENTED_EDGE('',*,*,#115541,.F.); +#115541 = EDGE_CURVE('',#115129,#115043,#115542,.T.); +#115542 = LINE('',#115543,#115544); +#115543 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115544 = VECTOR('',#115545,1.); +#115545 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115546 = ORIENTED_EDGE('',*,*,#115128,.T.); +#115547 = ORIENTED_EDGE('',*,*,#115548,.T.); +#115548 = EDGE_CURVE('',#115121,#115041,#115549,.T.); +#115549 = LINE('',#115550,#115551); +#115550 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#115551 = VECTOR('',#115552,1.); +#115552 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115553 = PLANE('',#115554); +#115554 = AXIS2_PLACEMENT_3D('',#115555,#115556,#115557); +#115555 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,0.)); +#115556 = DIRECTION('',(0.,0.,1.)); +#115557 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#115558 = ADVANCED_FACE('',(#115559),#115570,.T.); +#115559 = FACE_BOUND('',#115560,.T.); +#115560 = EDGE_LOOP('',(#115561,#115562,#115568,#115569)); +#115561 = ORIENTED_EDGE('',*,*,#115136,.T.); +#115562 = ORIENTED_EDGE('',*,*,#115563,.T.); +#115563 = EDGE_CURVE('',#115137,#115082,#115564,.T.); +#115564 = LINE('',#115565,#115566); +#115565 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#115566 = VECTOR('',#115567,1.); +#115567 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115568 = ORIENTED_EDGE('',*,*,#115089,.F.); +#115569 = ORIENTED_EDGE('',*,*,#115541,.F.); +#115570 = PLANE('',#115571); +#115571 = AXIS2_PLACEMENT_3D('',#115572,#115573,#115574); +#115572 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115573 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115575 = ADVANCED_FACE('',(#115576,#115587,#115653,#115719,#115785, + #115851,#115917,#115983,#116049,#116115,#116181),#116247,.F.); +#115576 = FACE_BOUND('',#115577,.F.); +#115577 = EDGE_LOOP('',(#115578,#115584,#115585,#115586)); +#115578 = ORIENTED_EDGE('',*,*,#115579,.T.); +#115579 = EDGE_CURVE('',#115074,#115145,#115580,.T.); +#115580 = LINE('',#115581,#115582); +#115581 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.2)); +#115582 = VECTOR('',#115583,1.); +#115583 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115584 = ORIENTED_EDGE('',*,*,#115144,.T.); +#115585 = ORIENTED_EDGE('',*,*,#115563,.T.); +#115586 = ORIENTED_EDGE('',*,*,#115081,.T.); +#115587 = FACE_BOUND('',#115588,.F.); +#115588 = EDGE_LOOP('',(#115589,#115599,#115607,#115615,#115623,#115631, + #115639,#115647)); +#115589 = ORIENTED_EDGE('',*,*,#115590,.F.); +#115590 = EDGE_CURVE('',#115591,#115593,#115595,.T.); +#115591 = VERTEX_POINT('',#115592); +#115592 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115593 = VERTEX_POINT('',#115594); +#115594 = CARTESIAN_POINT('',(0.1,-23.31,0.2)); +#115595 = LINE('',#115596,#115597); +#115596 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115597 = VECTOR('',#115598,1.); +#115598 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115599 = ORIENTED_EDGE('',*,*,#115600,.T.); +#115600 = EDGE_CURVE('',#115591,#115601,#115603,.T.); +#115601 = VERTEX_POINT('',#115602); +#115602 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#115603 = LINE('',#115604,#115605); +#115604 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115605 = VECTOR('',#115606,1.); +#115606 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115607 = ORIENTED_EDGE('',*,*,#115608,.F.); +#115608 = EDGE_CURVE('',#115609,#115601,#115611,.T.); +#115609 = VERTEX_POINT('',#115610); +#115610 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#115611 = LINE('',#115612,#115613); +#115612 = CARTESIAN_POINT('',(-0.1,-17.145,0.2)); +#115613 = VECTOR('',#115614,1.); +#115614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115615 = ORIENTED_EDGE('',*,*,#115616,.T.); +#115616 = EDGE_CURVE('',#115609,#115617,#115619,.T.); +#115617 = VERTEX_POINT('',#115618); +#115618 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#115619 = LINE('',#115620,#115621); +#115620 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115621 = VECTOR('',#115622,1.); +#115622 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115623 = ORIENTED_EDGE('',*,*,#115624,.T.); +#115624 = EDGE_CURVE('',#115617,#115625,#115627,.T.); +#115625 = VERTEX_POINT('',#115626); +#115626 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#115627 = LINE('',#115628,#115629); +#115628 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#115629 = VECTOR('',#115630,1.); +#115630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115631 = ORIENTED_EDGE('',*,*,#115632,.T.); +#115632 = EDGE_CURVE('',#115625,#115633,#115635,.T.); +#115633 = VERTEX_POINT('',#115634); +#115634 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#115635 = LINE('',#115636,#115637); +#115636 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#115637 = VECTOR('',#115638,1.); +#115638 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115639 = ORIENTED_EDGE('',*,*,#115640,.T.); +#115640 = EDGE_CURVE('',#115633,#115641,#115643,.T.); +#115641 = VERTEX_POINT('',#115642); +#115642 = CARTESIAN_POINT('',(0.1,-23.16,0.2)); +#115643 = LINE('',#115644,#115645); +#115644 = CARTESIAN_POINT('',(0.1,-17.145,0.2)); +#115645 = VECTOR('',#115646,1.); +#115646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115647 = ORIENTED_EDGE('',*,*,#115648,.T.); +#115648 = EDGE_CURVE('',#115641,#115593,#115649,.T.); +#115649 = LINE('',#115650,#115651); +#115650 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#115651 = VECTOR('',#115652,1.); +#115652 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115653 = FACE_BOUND('',#115654,.F.); +#115654 = EDGE_LOOP('',(#115655,#115665,#115673,#115681,#115689,#115697, + #115705,#115713)); +#115655 = ORIENTED_EDGE('',*,*,#115656,.F.); +#115656 = EDGE_CURVE('',#115657,#115659,#115661,.T.); +#115657 = VERTEX_POINT('',#115658); +#115658 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115659 = VERTEX_POINT('',#115660); +#115660 = CARTESIAN_POINT('',(0.1,-20.77,0.2)); +#115661 = LINE('',#115662,#115663); +#115662 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115663 = VECTOR('',#115664,1.); +#115664 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115665 = ORIENTED_EDGE('',*,*,#115666,.T.); +#115666 = EDGE_CURVE('',#115657,#115667,#115669,.T.); +#115667 = VERTEX_POINT('',#115668); +#115668 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#115669 = LINE('',#115670,#115671); +#115670 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115671 = VECTOR('',#115672,1.); +#115672 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115673 = ORIENTED_EDGE('',*,*,#115674,.F.); +#115674 = EDGE_CURVE('',#115675,#115667,#115677,.T.); +#115675 = VERTEX_POINT('',#115676); +#115676 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#115677 = LINE('',#115678,#115679); +#115678 = CARTESIAN_POINT('',(-0.1,-15.875,0.2)); +#115679 = VECTOR('',#115680,1.); +#115680 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115681 = ORIENTED_EDGE('',*,*,#115682,.T.); +#115682 = EDGE_CURVE('',#115675,#115683,#115685,.T.); +#115683 = VERTEX_POINT('',#115684); +#115684 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#115685 = LINE('',#115686,#115687); +#115686 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115687 = VECTOR('',#115688,1.); +#115688 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115689 = ORIENTED_EDGE('',*,*,#115690,.T.); +#115690 = EDGE_CURVE('',#115683,#115691,#115693,.T.); +#115691 = VERTEX_POINT('',#115692); +#115692 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#115693 = LINE('',#115694,#115695); +#115694 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#115695 = VECTOR('',#115696,1.); +#115696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115697 = ORIENTED_EDGE('',*,*,#115698,.T.); +#115698 = EDGE_CURVE('',#115691,#115699,#115701,.T.); +#115699 = VERTEX_POINT('',#115700); +#115700 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#115701 = LINE('',#115702,#115703); +#115702 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#115703 = VECTOR('',#115704,1.); +#115704 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115705 = ORIENTED_EDGE('',*,*,#115706,.T.); +#115706 = EDGE_CURVE('',#115699,#115707,#115709,.T.); +#115707 = VERTEX_POINT('',#115708); +#115708 = CARTESIAN_POINT('',(0.1,-20.62,0.2)); +#115709 = LINE('',#115710,#115711); +#115710 = CARTESIAN_POINT('',(0.1,-15.875,0.2)); +#115711 = VECTOR('',#115712,1.); +#115712 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115713 = ORIENTED_EDGE('',*,*,#115714,.T.); +#115714 = EDGE_CURVE('',#115707,#115659,#115715,.T.); +#115715 = LINE('',#115716,#115717); +#115716 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#115717 = VECTOR('',#115718,1.); +#115718 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115719 = FACE_BOUND('',#115720,.F.); +#115720 = EDGE_LOOP('',(#115721,#115731,#115739,#115747,#115755,#115763, + #115771,#115779)); +#115721 = ORIENTED_EDGE('',*,*,#115722,.F.); +#115722 = EDGE_CURVE('',#115723,#115725,#115727,.T.); +#115723 = VERTEX_POINT('',#115724); +#115724 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115725 = VERTEX_POINT('',#115726); +#115726 = CARTESIAN_POINT('',(0.1,-18.23,0.2)); +#115727 = LINE('',#115728,#115729); +#115728 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115729 = VECTOR('',#115730,1.); +#115730 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115731 = ORIENTED_EDGE('',*,*,#115732,.T.); +#115732 = EDGE_CURVE('',#115723,#115733,#115735,.T.); +#115733 = VERTEX_POINT('',#115734); +#115734 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#115735 = LINE('',#115736,#115737); +#115736 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115737 = VECTOR('',#115738,1.); +#115738 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115739 = ORIENTED_EDGE('',*,*,#115740,.F.); +#115740 = EDGE_CURVE('',#115741,#115733,#115743,.T.); +#115741 = VERTEX_POINT('',#115742); +#115742 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#115743 = LINE('',#115744,#115745); +#115744 = CARTESIAN_POINT('',(-0.1,-14.605,0.2)); +#115745 = VECTOR('',#115746,1.); +#115746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115747 = ORIENTED_EDGE('',*,*,#115748,.T.); +#115748 = EDGE_CURVE('',#115741,#115749,#115751,.T.); +#115749 = VERTEX_POINT('',#115750); +#115750 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#115751 = LINE('',#115752,#115753); +#115752 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115753 = VECTOR('',#115754,1.); +#115754 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115755 = ORIENTED_EDGE('',*,*,#115756,.T.); +#115756 = EDGE_CURVE('',#115749,#115757,#115759,.T.); +#115757 = VERTEX_POINT('',#115758); +#115758 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#115759 = LINE('',#115760,#115761); +#115760 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#115761 = VECTOR('',#115762,1.); +#115762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115763 = ORIENTED_EDGE('',*,*,#115764,.T.); +#115764 = EDGE_CURVE('',#115757,#115765,#115767,.T.); +#115765 = VERTEX_POINT('',#115766); +#115766 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#115767 = LINE('',#115768,#115769); +#115768 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#115769 = VECTOR('',#115770,1.); +#115770 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115771 = ORIENTED_EDGE('',*,*,#115772,.T.); +#115772 = EDGE_CURVE('',#115765,#115773,#115775,.T.); +#115773 = VERTEX_POINT('',#115774); +#115774 = CARTESIAN_POINT('',(0.1,-18.08,0.2)); +#115775 = LINE('',#115776,#115777); +#115776 = CARTESIAN_POINT('',(0.1,-14.605,0.2)); +#115777 = VECTOR('',#115778,1.); +#115778 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115779 = ORIENTED_EDGE('',*,*,#115780,.T.); +#115780 = EDGE_CURVE('',#115773,#115725,#115781,.T.); +#115781 = LINE('',#115782,#115783); +#115782 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#115783 = VECTOR('',#115784,1.); +#115784 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115785 = FACE_BOUND('',#115786,.F.); +#115786 = EDGE_LOOP('',(#115787,#115797,#115805,#115813,#115821,#115829, + #115837,#115845)); +#115787 = ORIENTED_EDGE('',*,*,#115788,.F.); +#115788 = EDGE_CURVE('',#115789,#115791,#115793,.T.); +#115789 = VERTEX_POINT('',#115790); +#115790 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115791 = VERTEX_POINT('',#115792); +#115792 = CARTESIAN_POINT('',(0.1,-15.69,0.2)); +#115793 = LINE('',#115794,#115795); +#115794 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115795 = VECTOR('',#115796,1.); +#115796 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115797 = ORIENTED_EDGE('',*,*,#115798,.T.); +#115798 = EDGE_CURVE('',#115789,#115799,#115801,.T.); +#115799 = VERTEX_POINT('',#115800); +#115800 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#115801 = LINE('',#115802,#115803); +#115802 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115803 = VECTOR('',#115804,1.); +#115804 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115805 = ORIENTED_EDGE('',*,*,#115806,.F.); +#115806 = EDGE_CURVE('',#115807,#115799,#115809,.T.); +#115807 = VERTEX_POINT('',#115808); +#115808 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#115809 = LINE('',#115810,#115811); +#115810 = CARTESIAN_POINT('',(-0.1,-13.335,0.2)); +#115811 = VECTOR('',#115812,1.); +#115812 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115813 = ORIENTED_EDGE('',*,*,#115814,.T.); +#115814 = EDGE_CURVE('',#115807,#115815,#115817,.T.); +#115815 = VERTEX_POINT('',#115816); +#115816 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#115817 = LINE('',#115818,#115819); +#115818 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115819 = VECTOR('',#115820,1.); +#115820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115821 = ORIENTED_EDGE('',*,*,#115822,.T.); +#115822 = EDGE_CURVE('',#115815,#115823,#115825,.T.); +#115823 = VERTEX_POINT('',#115824); +#115824 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#115825 = LINE('',#115826,#115827); +#115826 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#115827 = VECTOR('',#115828,1.); +#115828 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115829 = ORIENTED_EDGE('',*,*,#115830,.T.); +#115830 = EDGE_CURVE('',#115823,#115831,#115833,.T.); +#115831 = VERTEX_POINT('',#115832); +#115832 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#115833 = LINE('',#115834,#115835); +#115834 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#115835 = VECTOR('',#115836,1.); +#115836 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115837 = ORIENTED_EDGE('',*,*,#115838,.T.); +#115838 = EDGE_CURVE('',#115831,#115839,#115841,.T.); +#115839 = VERTEX_POINT('',#115840); +#115840 = CARTESIAN_POINT('',(0.1,-15.54,0.2)); +#115841 = LINE('',#115842,#115843); +#115842 = CARTESIAN_POINT('',(0.1,-13.335,0.2)); +#115843 = VECTOR('',#115844,1.); +#115844 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115845 = ORIENTED_EDGE('',*,*,#115846,.T.); +#115846 = EDGE_CURVE('',#115839,#115791,#115847,.T.); +#115847 = LINE('',#115848,#115849); +#115848 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#115849 = VECTOR('',#115850,1.); +#115850 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115851 = FACE_BOUND('',#115852,.F.); +#115852 = EDGE_LOOP('',(#115853,#115863,#115871,#115879,#115887,#115895, + #115903,#115911)); +#115853 = ORIENTED_EDGE('',*,*,#115854,.F.); +#115854 = EDGE_CURVE('',#115855,#115857,#115859,.T.); +#115855 = VERTEX_POINT('',#115856); +#115856 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115857 = VERTEX_POINT('',#115858); +#115858 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#115859 = LINE('',#115860,#115861); +#115860 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115861 = VECTOR('',#115862,1.); +#115862 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115863 = ORIENTED_EDGE('',*,*,#115864,.T.); +#115864 = EDGE_CURVE('',#115855,#115865,#115867,.T.); +#115865 = VERTEX_POINT('',#115866); +#115866 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#115867 = LINE('',#115868,#115869); +#115868 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115869 = VECTOR('',#115870,1.); +#115870 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115871 = ORIENTED_EDGE('',*,*,#115872,.F.); +#115872 = EDGE_CURVE('',#115873,#115865,#115875,.T.); +#115873 = VERTEX_POINT('',#115874); +#115874 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#115875 = LINE('',#115876,#115877); +#115876 = CARTESIAN_POINT('',(-0.1,-12.065,0.2)); +#115877 = VECTOR('',#115878,1.); +#115878 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115879 = ORIENTED_EDGE('',*,*,#115880,.T.); +#115880 = EDGE_CURVE('',#115873,#115881,#115883,.T.); +#115881 = VERTEX_POINT('',#115882); +#115882 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#115883 = LINE('',#115884,#115885); +#115884 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115885 = VECTOR('',#115886,1.); +#115886 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115887 = ORIENTED_EDGE('',*,*,#115888,.T.); +#115888 = EDGE_CURVE('',#115881,#115889,#115891,.T.); +#115889 = VERTEX_POINT('',#115890); +#115890 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#115891 = LINE('',#115892,#115893); +#115892 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#115893 = VECTOR('',#115894,1.); +#115894 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115895 = ORIENTED_EDGE('',*,*,#115896,.T.); +#115896 = EDGE_CURVE('',#115889,#115897,#115899,.T.); +#115897 = VERTEX_POINT('',#115898); +#115898 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#115899 = LINE('',#115900,#115901); +#115900 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#115901 = VECTOR('',#115902,1.); +#115902 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115903 = ORIENTED_EDGE('',*,*,#115904,.T.); +#115904 = EDGE_CURVE('',#115897,#115905,#115907,.T.); +#115905 = VERTEX_POINT('',#115906); +#115906 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#115907 = LINE('',#115908,#115909); +#115908 = CARTESIAN_POINT('',(0.1,-12.065,0.2)); +#115909 = VECTOR('',#115910,1.); +#115910 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115911 = ORIENTED_EDGE('',*,*,#115912,.T.); +#115912 = EDGE_CURVE('',#115905,#115857,#115913,.T.); +#115913 = LINE('',#115914,#115915); +#115914 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#115915 = VECTOR('',#115916,1.); +#115916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115917 = FACE_BOUND('',#115918,.F.); +#115918 = EDGE_LOOP('',(#115919,#115929,#115937,#115945,#115953,#115961, + #115969,#115977)); +#115919 = ORIENTED_EDGE('',*,*,#115920,.F.); +#115920 = EDGE_CURVE('',#115921,#115923,#115925,.T.); +#115921 = VERTEX_POINT('',#115922); +#115922 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115923 = VERTEX_POINT('',#115924); +#115924 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#115925 = LINE('',#115926,#115927); +#115926 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115927 = VECTOR('',#115928,1.); +#115928 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115929 = ORIENTED_EDGE('',*,*,#115930,.T.); +#115930 = EDGE_CURVE('',#115921,#115931,#115933,.T.); +#115931 = VERTEX_POINT('',#115932); +#115932 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#115933 = LINE('',#115934,#115935); +#115934 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115935 = VECTOR('',#115936,1.); +#115936 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115937 = ORIENTED_EDGE('',*,*,#115938,.F.); +#115938 = EDGE_CURVE('',#115939,#115931,#115941,.T.); +#115939 = VERTEX_POINT('',#115940); +#115940 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#115941 = LINE('',#115942,#115943); +#115942 = CARTESIAN_POINT('',(-0.1,-10.795,0.2)); +#115943 = VECTOR('',#115944,1.); +#115944 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115945 = ORIENTED_EDGE('',*,*,#115946,.T.); +#115946 = EDGE_CURVE('',#115939,#115947,#115949,.T.); +#115947 = VERTEX_POINT('',#115948); +#115948 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#115949 = LINE('',#115950,#115951); +#115950 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115951 = VECTOR('',#115952,1.); +#115952 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115953 = ORIENTED_EDGE('',*,*,#115954,.T.); +#115954 = EDGE_CURVE('',#115947,#115955,#115957,.T.); +#115955 = VERTEX_POINT('',#115956); +#115956 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#115957 = LINE('',#115958,#115959); +#115958 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#115959 = VECTOR('',#115960,1.); +#115960 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115961 = ORIENTED_EDGE('',*,*,#115962,.T.); +#115962 = EDGE_CURVE('',#115955,#115963,#115965,.T.); +#115963 = VERTEX_POINT('',#115964); +#115964 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#115965 = LINE('',#115966,#115967); +#115966 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#115967 = VECTOR('',#115968,1.); +#115968 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115969 = ORIENTED_EDGE('',*,*,#115970,.T.); +#115970 = EDGE_CURVE('',#115963,#115971,#115973,.T.); +#115971 = VERTEX_POINT('',#115972); +#115972 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#115973 = LINE('',#115974,#115975); +#115974 = CARTESIAN_POINT('',(0.1,-10.795,0.2)); +#115975 = VECTOR('',#115976,1.); +#115976 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115977 = ORIENTED_EDGE('',*,*,#115978,.T.); +#115978 = EDGE_CURVE('',#115971,#115923,#115979,.T.); +#115979 = LINE('',#115980,#115981); +#115980 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#115981 = VECTOR('',#115982,1.); +#115982 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115983 = FACE_BOUND('',#115984,.F.); +#115984 = EDGE_LOOP('',(#115985,#115995,#116003,#116011,#116019,#116027, + #116035,#116043)); +#115985 = ORIENTED_EDGE('',*,*,#115986,.F.); +#115986 = EDGE_CURVE('',#115987,#115989,#115991,.T.); +#115987 = VERTEX_POINT('',#115988); +#115988 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#115989 = VERTEX_POINT('',#115990); +#115990 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#115991 = LINE('',#115992,#115993); +#115992 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#115993 = VECTOR('',#115994,1.); +#115994 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115995 = ORIENTED_EDGE('',*,*,#115996,.T.); +#115996 = EDGE_CURVE('',#115987,#115997,#115999,.T.); +#115997 = VERTEX_POINT('',#115998); +#115998 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#115999 = LINE('',#116000,#116001); +#116000 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#116001 = VECTOR('',#116002,1.); +#116002 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116003 = ORIENTED_EDGE('',*,*,#116004,.F.); +#116004 = EDGE_CURVE('',#116005,#115997,#116007,.T.); +#116005 = VERTEX_POINT('',#116006); +#116006 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#116007 = LINE('',#116008,#116009); +#116008 = CARTESIAN_POINT('',(-0.1,-9.525,0.2)); +#116009 = VECTOR('',#116010,1.); +#116010 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116011 = ORIENTED_EDGE('',*,*,#116012,.T.); +#116012 = EDGE_CURVE('',#116005,#116013,#116015,.T.); +#116013 = VERTEX_POINT('',#116014); +#116014 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#116015 = LINE('',#116016,#116017); +#116016 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#116017 = VECTOR('',#116018,1.); +#116018 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116019 = ORIENTED_EDGE('',*,*,#116020,.T.); +#116020 = EDGE_CURVE('',#116013,#116021,#116023,.T.); +#116021 = VERTEX_POINT('',#116022); +#116022 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#116023 = LINE('',#116024,#116025); +#116024 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#116025 = VECTOR('',#116026,1.); +#116026 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116027 = ORIENTED_EDGE('',*,*,#116028,.T.); +#116028 = EDGE_CURVE('',#116021,#116029,#116031,.T.); +#116029 = VERTEX_POINT('',#116030); +#116030 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#116031 = LINE('',#116032,#116033); +#116032 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#116033 = VECTOR('',#116034,1.); +#116034 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116035 = ORIENTED_EDGE('',*,*,#116036,.T.); +#116036 = EDGE_CURVE('',#116029,#116037,#116039,.T.); +#116037 = VERTEX_POINT('',#116038); +#116038 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#116039 = LINE('',#116040,#116041); +#116040 = CARTESIAN_POINT('',(0.1,-9.525,0.2)); +#116041 = VECTOR('',#116042,1.); +#116042 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116043 = ORIENTED_EDGE('',*,*,#116044,.T.); +#116044 = EDGE_CURVE('',#116037,#115989,#116045,.T.); +#116045 = LINE('',#116046,#116047); +#116046 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#116047 = VECTOR('',#116048,1.); +#116048 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116049 = FACE_BOUND('',#116050,.F.); +#116050 = EDGE_LOOP('',(#116051,#116061,#116069,#116077,#116085,#116093, + #116101,#116109)); +#116051 = ORIENTED_EDGE('',*,*,#116052,.F.); +#116052 = EDGE_CURVE('',#116053,#116055,#116057,.T.); +#116053 = VERTEX_POINT('',#116054); +#116054 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116055 = VERTEX_POINT('',#116056); +#116056 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#116057 = LINE('',#116058,#116059); +#116058 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116059 = VECTOR('',#116060,1.); +#116060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116061 = ORIENTED_EDGE('',*,*,#116062,.T.); +#116062 = EDGE_CURVE('',#116053,#116063,#116065,.T.); +#116063 = VERTEX_POINT('',#116064); +#116064 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#116065 = LINE('',#116066,#116067); +#116066 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116067 = VECTOR('',#116068,1.); +#116068 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116069 = ORIENTED_EDGE('',*,*,#116070,.F.); +#116070 = EDGE_CURVE('',#116071,#116063,#116073,.T.); +#116071 = VERTEX_POINT('',#116072); +#116072 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#116073 = LINE('',#116074,#116075); +#116074 = CARTESIAN_POINT('',(-0.1,-8.255,0.2)); +#116075 = VECTOR('',#116076,1.); +#116076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116077 = ORIENTED_EDGE('',*,*,#116078,.T.); +#116078 = EDGE_CURVE('',#116071,#116079,#116081,.T.); +#116079 = VERTEX_POINT('',#116080); +#116080 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#116081 = LINE('',#116082,#116083); +#116082 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116083 = VECTOR('',#116084,1.); +#116084 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116085 = ORIENTED_EDGE('',*,*,#116086,.T.); +#116086 = EDGE_CURVE('',#116079,#116087,#116089,.T.); +#116087 = VERTEX_POINT('',#116088); +#116088 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#116089 = LINE('',#116090,#116091); +#116090 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#116091 = VECTOR('',#116092,1.); +#116092 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116093 = ORIENTED_EDGE('',*,*,#116094,.T.); +#116094 = EDGE_CURVE('',#116087,#116095,#116097,.T.); +#116095 = VERTEX_POINT('',#116096); +#116096 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#116097 = LINE('',#116098,#116099); +#116098 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#116099 = VECTOR('',#116100,1.); +#116100 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116101 = ORIENTED_EDGE('',*,*,#116102,.T.); +#116102 = EDGE_CURVE('',#116095,#116103,#116105,.T.); +#116103 = VERTEX_POINT('',#116104); +#116104 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#116105 = LINE('',#116106,#116107); +#116106 = CARTESIAN_POINT('',(0.1,-8.255,0.2)); +#116107 = VECTOR('',#116108,1.); +#116108 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116109 = ORIENTED_EDGE('',*,*,#116110,.T.); +#116110 = EDGE_CURVE('',#116103,#116055,#116111,.T.); +#116111 = LINE('',#116112,#116113); +#116112 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#116113 = VECTOR('',#116114,1.); +#116114 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116115 = FACE_BOUND('',#116116,.F.); +#116116 = EDGE_LOOP('',(#116117,#116127,#116135,#116143,#116151,#116159, + #116167,#116175)); +#116117 = ORIENTED_EDGE('',*,*,#116118,.F.); +#116118 = EDGE_CURVE('',#116119,#116121,#116123,.T.); +#116119 = VERTEX_POINT('',#116120); +#116120 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116121 = VERTEX_POINT('',#116122); +#116122 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#116123 = LINE('',#116124,#116125); +#116124 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116125 = VECTOR('',#116126,1.); +#116126 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116127 = ORIENTED_EDGE('',*,*,#116128,.T.); +#116128 = EDGE_CURVE('',#116119,#116129,#116131,.T.); +#116129 = VERTEX_POINT('',#116130); +#116130 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#116131 = LINE('',#116132,#116133); +#116132 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116133 = VECTOR('',#116134,1.); +#116134 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116135 = ORIENTED_EDGE('',*,*,#116136,.F.); +#116136 = EDGE_CURVE('',#116137,#116129,#116139,.T.); +#116137 = VERTEX_POINT('',#116138); +#116138 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#116139 = LINE('',#116140,#116141); +#116140 = CARTESIAN_POINT('',(-0.1,-6.985,0.2)); +#116141 = VECTOR('',#116142,1.); +#116142 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116143 = ORIENTED_EDGE('',*,*,#116144,.T.); +#116144 = EDGE_CURVE('',#116137,#116145,#116147,.T.); +#116145 = VERTEX_POINT('',#116146); +#116146 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#116147 = LINE('',#116148,#116149); +#116148 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116149 = VECTOR('',#116150,1.); +#116150 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116151 = ORIENTED_EDGE('',*,*,#116152,.T.); +#116152 = EDGE_CURVE('',#116145,#116153,#116155,.T.); +#116153 = VERTEX_POINT('',#116154); +#116154 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#116155 = LINE('',#116156,#116157); +#116156 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#116157 = VECTOR('',#116158,1.); +#116158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116159 = ORIENTED_EDGE('',*,*,#116160,.T.); +#116160 = EDGE_CURVE('',#116153,#116161,#116163,.T.); +#116161 = VERTEX_POINT('',#116162); +#116162 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#116163 = LINE('',#116164,#116165); +#116164 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#116165 = VECTOR('',#116166,1.); +#116166 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116167 = ORIENTED_EDGE('',*,*,#116168,.T.); +#116168 = EDGE_CURVE('',#116161,#116169,#116171,.T.); +#116169 = VERTEX_POINT('',#116170); +#116170 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#116171 = LINE('',#116172,#116173); +#116172 = CARTESIAN_POINT('',(0.1,-6.985,0.2)); +#116173 = VECTOR('',#116174,1.); +#116174 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116175 = ORIENTED_EDGE('',*,*,#116176,.T.); +#116176 = EDGE_CURVE('',#116169,#116121,#116177,.T.); +#116177 = LINE('',#116178,#116179); +#116178 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#116179 = VECTOR('',#116180,1.); +#116180 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116181 = FACE_BOUND('',#116182,.F.); +#116182 = EDGE_LOOP('',(#116183,#116193,#116201,#116209,#116217,#116225, + #116233,#116241)); +#116183 = ORIENTED_EDGE('',*,*,#116184,.F.); +#116184 = EDGE_CURVE('',#116185,#116187,#116189,.T.); +#116185 = VERTEX_POINT('',#116186); +#116186 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116187 = VERTEX_POINT('',#116188); +#116188 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#116189 = LINE('',#116190,#116191); +#116190 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116191 = VECTOR('',#116192,1.); +#116192 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116193 = ORIENTED_EDGE('',*,*,#116194,.T.); +#116194 = EDGE_CURVE('',#116185,#116195,#116197,.T.); +#116195 = VERTEX_POINT('',#116196); +#116196 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#116197 = LINE('',#116198,#116199); +#116198 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116199 = VECTOR('',#116200,1.); +#116200 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116201 = ORIENTED_EDGE('',*,*,#116202,.F.); +#116202 = EDGE_CURVE('',#116203,#116195,#116205,.T.); +#116203 = VERTEX_POINT('',#116204); +#116204 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#116205 = LINE('',#116206,#116207); +#116206 = CARTESIAN_POINT('',(-0.1,-5.715,0.2)); +#116207 = VECTOR('',#116208,1.); +#116208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116209 = ORIENTED_EDGE('',*,*,#116210,.T.); +#116210 = EDGE_CURVE('',#116203,#116211,#116213,.T.); +#116211 = VERTEX_POINT('',#116212); +#116212 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#116213 = LINE('',#116214,#116215); +#116214 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116215 = VECTOR('',#116216,1.); +#116216 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116217 = ORIENTED_EDGE('',*,*,#116218,.T.); +#116218 = EDGE_CURVE('',#116211,#116219,#116221,.T.); +#116219 = VERTEX_POINT('',#116220); +#116220 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#116221 = LINE('',#116222,#116223); +#116222 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#116223 = VECTOR('',#116224,1.); +#116224 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116225 = ORIENTED_EDGE('',*,*,#116226,.T.); +#116226 = EDGE_CURVE('',#116219,#116227,#116229,.T.); +#116227 = VERTEX_POINT('',#116228); +#116228 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#116229 = LINE('',#116230,#116231); +#116230 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#116231 = VECTOR('',#116232,1.); +#116232 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116233 = ORIENTED_EDGE('',*,*,#116234,.T.); +#116234 = EDGE_CURVE('',#116227,#116235,#116237,.T.); +#116235 = VERTEX_POINT('',#116236); +#116236 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#116237 = LINE('',#116238,#116239); +#116238 = CARTESIAN_POINT('',(0.1,-5.715,0.2)); +#116239 = VECTOR('',#116240,1.); +#116240 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116241 = ORIENTED_EDGE('',*,*,#116242,.T.); +#116242 = EDGE_CURVE('',#116235,#116187,#116243,.T.); +#116243 = LINE('',#116244,#116245); +#116244 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#116245 = VECTOR('',#116246,1.); +#116246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116247 = PLANE('',#116248); +#116248 = AXIS2_PLACEMENT_3D('',#116249,#116250,#116251); +#116249 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,0.2)); +#116250 = DIRECTION('',(0.,0.,1.)); +#116251 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#116252 = ADVANCED_FACE('',(#116253),#116259,.T.); +#116253 = FACE_BOUND('',#116254,.T.); +#116254 = EDGE_LOOP('',(#116255,#116256,#116257,#116258)); +#116255 = ORIENTED_EDGE('',*,*,#115073,.T.); +#116256 = ORIENTED_EDGE('',*,*,#115579,.T.); +#116257 = ORIENTED_EDGE('',*,*,#115152,.F.); +#116258 = ORIENTED_EDGE('',*,*,#115169,.F.); +#116259 = PLANE('',#116260); +#116260 = AXIS2_PLACEMENT_3D('',#116261,#116262,#116263); +#116261 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#116262 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116263 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116264 = ADVANCED_FACE('',(#116265),#116271,.F.); +#116265 = FACE_BOUND('',#116266,.F.); +#116266 = EDGE_LOOP('',(#116267,#116268,#116269,#116270)); +#116267 = ORIENTED_EDGE('',*,*,#115120,.T.); +#116268 = ORIENTED_EDGE('',*,*,#115185,.T.); +#116269 = ORIENTED_EDGE('',*,*,#115050,.F.); +#116270 = ORIENTED_EDGE('',*,*,#115548,.F.); +#116271 = PLANE('',#116272); +#116272 = AXIS2_PLACEMENT_3D('',#116273,#116274,#116275); +#116273 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#116274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116275 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116276 = ADVANCED_FACE('',(#116277),#116302,.T.); +#116277 = FACE_BOUND('',#116278,.T.); +#116278 = EDGE_LOOP('',(#116279,#116287,#116288,#116296)); +#116279 = ORIENTED_EDGE('',*,*,#116280,.F.); +#116280 = EDGE_CURVE('',#115195,#116281,#116283,.T.); +#116281 = VERTEX_POINT('',#116282); +#116282 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#116283 = LINE('',#116284,#116285); +#116284 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#116285 = VECTOR('',#116286,1.); +#116286 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116287 = ORIENTED_EDGE('',*,*,#115194,.T.); +#116288 = ORIENTED_EDGE('',*,*,#116289,.T.); +#116289 = EDGE_CURVE('',#115197,#116290,#116292,.T.); +#116290 = VERTEX_POINT('',#116291); +#116291 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#116292 = LINE('',#116293,#116294); +#116293 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#116294 = VECTOR('',#116295,1.); +#116295 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116296 = ORIENTED_EDGE('',*,*,#116297,.F.); +#116297 = EDGE_CURVE('',#116281,#116290,#116298,.T.); +#116298 = LINE('',#116299,#116300); +#116299 = CARTESIAN_POINT('',(0.3,-23.46,8.2)); +#116300 = VECTOR('',#116301,1.); +#116301 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116302 = PLANE('',#116303); +#116303 = AXIS2_PLACEMENT_3D('',#116304,#116305,#116306); +#116304 = CARTESIAN_POINT('',(0.45,-23.46,8.35)); +#116305 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116306 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116307 = ADVANCED_FACE('',(#116308),#116326,.T.); +#116308 = FACE_BOUND('',#116309,.T.); +#116309 = EDGE_LOOP('',(#116310,#116311,#116312,#116320)); +#116310 = ORIENTED_EDGE('',*,*,#116289,.F.); +#116311 = ORIENTED_EDGE('',*,*,#115220,.T.); +#116312 = ORIENTED_EDGE('',*,*,#116313,.T.); +#116313 = EDGE_CURVE('',#115213,#116314,#116316,.T.); +#116314 = VERTEX_POINT('',#116315); +#116315 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#116316 = LINE('',#116317,#116318); +#116317 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#116318 = VECTOR('',#116319,1.); +#116319 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116320 = ORIENTED_EDGE('',*,*,#116321,.F.); +#116321 = EDGE_CURVE('',#116290,#116314,#116322,.T.); +#116322 = LINE('',#116323,#116324); +#116323 = CARTESIAN_POINT('',(0.6,-22.56,8.2)); +#116324 = VECTOR('',#116325,1.); +#116325 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116326 = PLANE('',#116327); +#116327 = AXIS2_PLACEMENT_3D('',#116328,#116329,#116330); +#116328 = CARTESIAN_POINT('',(0.6,-22.41,8.35)); +#116329 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116330 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116331 = ADVANCED_FACE('',(#116332),#116350,.T.); +#116332 = FACE_BOUND('',#116333,.T.); +#116333 = EDGE_LOOP('',(#116334,#116335,#116336,#116344)); +#116334 = ORIENTED_EDGE('',*,*,#116313,.F.); +#116335 = ORIENTED_EDGE('',*,*,#115212,.T.); +#116336 = ORIENTED_EDGE('',*,*,#116337,.T.); +#116337 = EDGE_CURVE('',#115205,#116338,#116340,.T.); +#116338 = VERTEX_POINT('',#116339); +#116339 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#116340 = LINE('',#116341,#116342); +#116341 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#116342 = VECTOR('',#116343,1.); +#116343 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116344 = ORIENTED_EDGE('',*,*,#116345,.F.); +#116345 = EDGE_CURVE('',#116314,#116338,#116346,.T.); +#116346 = LINE('',#116347,#116348); +#116347 = CARTESIAN_POINT('',(-0.3,-22.26,8.2)); +#116348 = VECTOR('',#116349,1.); +#116349 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116350 = PLANE('',#116351); +#116351 = AXIS2_PLACEMENT_3D('',#116352,#116353,#116354); +#116352 = CARTESIAN_POINT('',(-0.45,-22.26,8.35)); +#116353 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116354 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116355 = ADVANCED_FACE('',(#116356),#116367,.T.); +#116356 = FACE_BOUND('',#116357,.T.); +#116357 = EDGE_LOOP('',(#116358,#116359,#116360,#116361)); +#116358 = ORIENTED_EDGE('',*,*,#116337,.F.); +#116359 = ORIENTED_EDGE('',*,*,#115204,.T.); +#116360 = ORIENTED_EDGE('',*,*,#116280,.T.); +#116361 = ORIENTED_EDGE('',*,*,#116362,.F.); +#116362 = EDGE_CURVE('',#116338,#116281,#116363,.T.); +#116363 = LINE('',#116364,#116365); +#116364 = CARTESIAN_POINT('',(-0.6,-23.16,8.2)); +#116365 = VECTOR('',#116366,1.); +#116366 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116367 = PLANE('',#116368); +#116368 = AXIS2_PLACEMENT_3D('',#116369,#116370,#116371); +#116369 = CARTESIAN_POINT('',(-0.6,-23.31,8.35)); +#116370 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116371 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116372 = ADVANCED_FACE('',(#116373),#116398,.T.); +#116373 = FACE_BOUND('',#116374,.T.); +#116374 = EDGE_LOOP('',(#116375,#116383,#116384,#116392)); +#116375 = ORIENTED_EDGE('',*,*,#116376,.F.); +#116376 = EDGE_CURVE('',#115229,#116377,#116379,.T.); +#116377 = VERTEX_POINT('',#116378); +#116378 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#116379 = LINE('',#116380,#116381); +#116380 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#116381 = VECTOR('',#116382,1.); +#116382 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116383 = ORIENTED_EDGE('',*,*,#115228,.T.); +#116384 = ORIENTED_EDGE('',*,*,#116385,.T.); +#116385 = EDGE_CURVE('',#115231,#116386,#116388,.T.); +#116386 = VERTEX_POINT('',#116387); +#116387 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#116388 = LINE('',#116389,#116390); +#116389 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#116390 = VECTOR('',#116391,1.); +#116391 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116392 = ORIENTED_EDGE('',*,*,#116393,.F.); +#116393 = EDGE_CURVE('',#116377,#116386,#116394,.T.); +#116394 = LINE('',#116395,#116396); +#116395 = CARTESIAN_POINT('',(0.3,-20.92,8.2)); +#116396 = VECTOR('',#116397,1.); +#116397 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116398 = PLANE('',#116399); +#116399 = AXIS2_PLACEMENT_3D('',#116400,#116401,#116402); +#116400 = CARTESIAN_POINT('',(0.45,-20.92,8.35)); +#116401 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116402 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116403 = ADVANCED_FACE('',(#116404),#116422,.T.); +#116404 = FACE_BOUND('',#116405,.T.); +#116405 = EDGE_LOOP('',(#116406,#116407,#116408,#116416)); +#116406 = ORIENTED_EDGE('',*,*,#116385,.F.); +#116407 = ORIENTED_EDGE('',*,*,#115254,.T.); +#116408 = ORIENTED_EDGE('',*,*,#116409,.T.); +#116409 = EDGE_CURVE('',#115247,#116410,#116412,.T.); +#116410 = VERTEX_POINT('',#116411); +#116411 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#116412 = LINE('',#116413,#116414); +#116413 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#116414 = VECTOR('',#116415,1.); +#116415 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116416 = ORIENTED_EDGE('',*,*,#116417,.F.); +#116417 = EDGE_CURVE('',#116386,#116410,#116418,.T.); +#116418 = LINE('',#116419,#116420); +#116419 = CARTESIAN_POINT('',(0.6,-20.02,8.2)); +#116420 = VECTOR('',#116421,1.); +#116421 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116422 = PLANE('',#116423); +#116423 = AXIS2_PLACEMENT_3D('',#116424,#116425,#116426); +#116424 = CARTESIAN_POINT('',(0.6,-19.87,8.35)); +#116425 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116426 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116427 = ADVANCED_FACE('',(#116428),#116446,.T.); +#116428 = FACE_BOUND('',#116429,.T.); +#116429 = EDGE_LOOP('',(#116430,#116431,#116432,#116440)); +#116430 = ORIENTED_EDGE('',*,*,#116409,.F.); +#116431 = ORIENTED_EDGE('',*,*,#115246,.T.); +#116432 = ORIENTED_EDGE('',*,*,#116433,.T.); +#116433 = EDGE_CURVE('',#115239,#116434,#116436,.T.); +#116434 = VERTEX_POINT('',#116435); +#116435 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#116436 = LINE('',#116437,#116438); +#116437 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#116438 = VECTOR('',#116439,1.); +#116439 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116440 = ORIENTED_EDGE('',*,*,#116441,.F.); +#116441 = EDGE_CURVE('',#116410,#116434,#116442,.T.); +#116442 = LINE('',#116443,#116444); +#116443 = CARTESIAN_POINT('',(-0.3,-19.72,8.2)); +#116444 = VECTOR('',#116445,1.); +#116445 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116446 = PLANE('',#116447); +#116447 = AXIS2_PLACEMENT_3D('',#116448,#116449,#116450); +#116448 = CARTESIAN_POINT('',(-0.45,-19.72,8.35)); +#116449 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116450 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116451 = ADVANCED_FACE('',(#116452),#116463,.T.); +#116452 = FACE_BOUND('',#116453,.T.); +#116453 = EDGE_LOOP('',(#116454,#116455,#116456,#116457)); +#116454 = ORIENTED_EDGE('',*,*,#116433,.F.); +#116455 = ORIENTED_EDGE('',*,*,#115238,.T.); +#116456 = ORIENTED_EDGE('',*,*,#116376,.T.); +#116457 = ORIENTED_EDGE('',*,*,#116458,.F.); +#116458 = EDGE_CURVE('',#116434,#116377,#116459,.T.); +#116459 = LINE('',#116460,#116461); +#116460 = CARTESIAN_POINT('',(-0.6,-20.62,8.2)); +#116461 = VECTOR('',#116462,1.); +#116462 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116463 = PLANE('',#116464); +#116464 = AXIS2_PLACEMENT_3D('',#116465,#116466,#116467); +#116465 = CARTESIAN_POINT('',(-0.6,-20.77,8.35)); +#116466 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116467 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116468 = ADVANCED_FACE('',(#116469),#116494,.T.); +#116469 = FACE_BOUND('',#116470,.T.); +#116470 = EDGE_LOOP('',(#116471,#116479,#116480,#116488)); +#116471 = ORIENTED_EDGE('',*,*,#116472,.F.); +#116472 = EDGE_CURVE('',#115263,#116473,#116475,.T.); +#116473 = VERTEX_POINT('',#116474); +#116474 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#116475 = LINE('',#116476,#116477); +#116476 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#116477 = VECTOR('',#116478,1.); +#116478 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116479 = ORIENTED_EDGE('',*,*,#115262,.T.); +#116480 = ORIENTED_EDGE('',*,*,#116481,.T.); +#116481 = EDGE_CURVE('',#115265,#116482,#116484,.T.); +#116482 = VERTEX_POINT('',#116483); +#116483 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#116484 = LINE('',#116485,#116486); +#116485 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#116486 = VECTOR('',#116487,1.); +#116487 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116488 = ORIENTED_EDGE('',*,*,#116489,.F.); +#116489 = EDGE_CURVE('',#116473,#116482,#116490,.T.); +#116490 = LINE('',#116491,#116492); +#116491 = CARTESIAN_POINT('',(0.3,-18.38,8.2)); +#116492 = VECTOR('',#116493,1.); +#116493 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116494 = PLANE('',#116495); +#116495 = AXIS2_PLACEMENT_3D('',#116496,#116497,#116498); +#116496 = CARTESIAN_POINT('',(0.45,-18.38,8.35)); +#116497 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116498 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116499 = ADVANCED_FACE('',(#116500),#116518,.T.); +#116500 = FACE_BOUND('',#116501,.T.); +#116501 = EDGE_LOOP('',(#116502,#116503,#116504,#116512)); +#116502 = ORIENTED_EDGE('',*,*,#116481,.F.); +#116503 = ORIENTED_EDGE('',*,*,#115288,.T.); +#116504 = ORIENTED_EDGE('',*,*,#116505,.T.); +#116505 = EDGE_CURVE('',#115281,#116506,#116508,.T.); +#116506 = VERTEX_POINT('',#116507); +#116507 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#116508 = LINE('',#116509,#116510); +#116509 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#116510 = VECTOR('',#116511,1.); +#116511 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116512 = ORIENTED_EDGE('',*,*,#116513,.F.); +#116513 = EDGE_CURVE('',#116482,#116506,#116514,.T.); +#116514 = LINE('',#116515,#116516); +#116515 = CARTESIAN_POINT('',(0.6,-17.48,8.2)); +#116516 = VECTOR('',#116517,1.); +#116517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116518 = PLANE('',#116519); +#116519 = AXIS2_PLACEMENT_3D('',#116520,#116521,#116522); +#116520 = CARTESIAN_POINT('',(0.6,-17.33,8.35)); +#116521 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116522 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116523 = ADVANCED_FACE('',(#116524),#116542,.T.); +#116524 = FACE_BOUND('',#116525,.T.); +#116525 = EDGE_LOOP('',(#116526,#116527,#116528,#116536)); +#116526 = ORIENTED_EDGE('',*,*,#116505,.F.); +#116527 = ORIENTED_EDGE('',*,*,#115280,.T.); +#116528 = ORIENTED_EDGE('',*,*,#116529,.T.); +#116529 = EDGE_CURVE('',#115273,#116530,#116532,.T.); +#116530 = VERTEX_POINT('',#116531); +#116531 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#116532 = LINE('',#116533,#116534); +#116533 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#116534 = VECTOR('',#116535,1.); +#116535 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116536 = ORIENTED_EDGE('',*,*,#116537,.F.); +#116537 = EDGE_CURVE('',#116506,#116530,#116538,.T.); +#116538 = LINE('',#116539,#116540); +#116539 = CARTESIAN_POINT('',(-0.3,-17.18,8.2)); +#116540 = VECTOR('',#116541,1.); +#116541 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116542 = PLANE('',#116543); +#116543 = AXIS2_PLACEMENT_3D('',#116544,#116545,#116546); +#116544 = CARTESIAN_POINT('',(-0.45,-17.18,8.35)); +#116545 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116546 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116547 = ADVANCED_FACE('',(#116548),#116559,.T.); +#116548 = FACE_BOUND('',#116549,.T.); +#116549 = EDGE_LOOP('',(#116550,#116551,#116552,#116553)); +#116550 = ORIENTED_EDGE('',*,*,#116529,.F.); +#116551 = ORIENTED_EDGE('',*,*,#115272,.T.); +#116552 = ORIENTED_EDGE('',*,*,#116472,.T.); +#116553 = ORIENTED_EDGE('',*,*,#116554,.F.); +#116554 = EDGE_CURVE('',#116530,#116473,#116555,.T.); +#116555 = LINE('',#116556,#116557); +#116556 = CARTESIAN_POINT('',(-0.6,-18.08,8.2)); +#116557 = VECTOR('',#116558,1.); +#116558 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116559 = PLANE('',#116560); +#116560 = AXIS2_PLACEMENT_3D('',#116561,#116562,#116563); +#116561 = CARTESIAN_POINT('',(-0.6,-18.23,8.35)); +#116562 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116563 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116564 = ADVANCED_FACE('',(#116565),#116590,.T.); +#116565 = FACE_BOUND('',#116566,.T.); +#116566 = EDGE_LOOP('',(#116567,#116575,#116576,#116584)); +#116567 = ORIENTED_EDGE('',*,*,#116568,.F.); +#116568 = EDGE_CURVE('',#115297,#116569,#116571,.T.); +#116569 = VERTEX_POINT('',#116570); +#116570 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#116571 = LINE('',#116572,#116573); +#116572 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#116573 = VECTOR('',#116574,1.); +#116574 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116575 = ORIENTED_EDGE('',*,*,#115296,.T.); +#116576 = ORIENTED_EDGE('',*,*,#116577,.T.); +#116577 = EDGE_CURVE('',#115299,#116578,#116580,.T.); +#116578 = VERTEX_POINT('',#116579); +#116579 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#116580 = LINE('',#116581,#116582); +#116581 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#116582 = VECTOR('',#116583,1.); +#116583 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116584 = ORIENTED_EDGE('',*,*,#116585,.F.); +#116585 = EDGE_CURVE('',#116569,#116578,#116586,.T.); +#116586 = LINE('',#116587,#116588); +#116587 = CARTESIAN_POINT('',(0.3,-15.84,8.2)); +#116588 = VECTOR('',#116589,1.); +#116589 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116590 = PLANE('',#116591); +#116591 = AXIS2_PLACEMENT_3D('',#116592,#116593,#116594); +#116592 = CARTESIAN_POINT('',(0.45,-15.84,8.35)); +#116593 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116594 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116595 = ADVANCED_FACE('',(#116596),#116614,.T.); +#116596 = FACE_BOUND('',#116597,.T.); +#116597 = EDGE_LOOP('',(#116598,#116599,#116600,#116608)); +#116598 = ORIENTED_EDGE('',*,*,#116577,.F.); +#116599 = ORIENTED_EDGE('',*,*,#115322,.T.); +#116600 = ORIENTED_EDGE('',*,*,#116601,.T.); +#116601 = EDGE_CURVE('',#115315,#116602,#116604,.T.); +#116602 = VERTEX_POINT('',#116603); +#116603 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#116604 = LINE('',#116605,#116606); +#116605 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#116606 = VECTOR('',#116607,1.); +#116607 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116608 = ORIENTED_EDGE('',*,*,#116609,.F.); +#116609 = EDGE_CURVE('',#116578,#116602,#116610,.T.); +#116610 = LINE('',#116611,#116612); +#116611 = CARTESIAN_POINT('',(0.6,-14.94,8.2)); +#116612 = VECTOR('',#116613,1.); +#116613 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116614 = PLANE('',#116615); +#116615 = AXIS2_PLACEMENT_3D('',#116616,#116617,#116618); +#116616 = CARTESIAN_POINT('',(0.6,-14.79,8.35)); +#116617 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116618 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116619 = ADVANCED_FACE('',(#116620),#116638,.T.); +#116620 = FACE_BOUND('',#116621,.T.); +#116621 = EDGE_LOOP('',(#116622,#116623,#116624,#116632)); +#116622 = ORIENTED_EDGE('',*,*,#116601,.F.); +#116623 = ORIENTED_EDGE('',*,*,#115314,.T.); +#116624 = ORIENTED_EDGE('',*,*,#116625,.T.); +#116625 = EDGE_CURVE('',#115307,#116626,#116628,.T.); +#116626 = VERTEX_POINT('',#116627); +#116627 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#116628 = LINE('',#116629,#116630); +#116629 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#116630 = VECTOR('',#116631,1.); +#116631 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116632 = ORIENTED_EDGE('',*,*,#116633,.F.); +#116633 = EDGE_CURVE('',#116602,#116626,#116634,.T.); +#116634 = LINE('',#116635,#116636); +#116635 = CARTESIAN_POINT('',(-0.3,-14.64,8.2)); +#116636 = VECTOR('',#116637,1.); +#116637 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116638 = PLANE('',#116639); +#116639 = AXIS2_PLACEMENT_3D('',#116640,#116641,#116642); +#116640 = CARTESIAN_POINT('',(-0.45,-14.64,8.35)); +#116641 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116642 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116643 = ADVANCED_FACE('',(#116644),#116655,.T.); +#116644 = FACE_BOUND('',#116645,.T.); +#116645 = EDGE_LOOP('',(#116646,#116647,#116648,#116649)); +#116646 = ORIENTED_EDGE('',*,*,#116625,.F.); +#116647 = ORIENTED_EDGE('',*,*,#115306,.T.); +#116648 = ORIENTED_EDGE('',*,*,#116568,.T.); +#116649 = ORIENTED_EDGE('',*,*,#116650,.F.); +#116650 = EDGE_CURVE('',#116626,#116569,#116651,.T.); +#116651 = LINE('',#116652,#116653); +#116652 = CARTESIAN_POINT('',(-0.6,-15.54,8.2)); +#116653 = VECTOR('',#116654,1.); +#116654 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116655 = PLANE('',#116656); +#116656 = AXIS2_PLACEMENT_3D('',#116657,#116658,#116659); +#116657 = CARTESIAN_POINT('',(-0.6,-15.69,8.35)); +#116658 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116659 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116660 = ADVANCED_FACE('',(#116661),#116686,.T.); +#116661 = FACE_BOUND('',#116662,.T.); +#116662 = EDGE_LOOP('',(#116663,#116671,#116672,#116680)); +#116663 = ORIENTED_EDGE('',*,*,#116664,.F.); +#116664 = EDGE_CURVE('',#115331,#116665,#116667,.T.); +#116665 = VERTEX_POINT('',#116666); +#116666 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#116667 = LINE('',#116668,#116669); +#116668 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#116669 = VECTOR('',#116670,1.); +#116670 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116671 = ORIENTED_EDGE('',*,*,#115330,.T.); +#116672 = ORIENTED_EDGE('',*,*,#116673,.T.); +#116673 = EDGE_CURVE('',#115333,#116674,#116676,.T.); +#116674 = VERTEX_POINT('',#116675); +#116675 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#116676 = LINE('',#116677,#116678); +#116677 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#116678 = VECTOR('',#116679,1.); +#116679 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116680 = ORIENTED_EDGE('',*,*,#116681,.F.); +#116681 = EDGE_CURVE('',#116665,#116674,#116682,.T.); +#116682 = LINE('',#116683,#116684); +#116683 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#116684 = VECTOR('',#116685,1.); +#116685 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116686 = PLANE('',#116687); +#116687 = AXIS2_PLACEMENT_3D('',#116688,#116689,#116690); +#116688 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#116689 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116690 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116691 = ADVANCED_FACE('',(#116692),#116710,.T.); +#116692 = FACE_BOUND('',#116693,.T.); +#116693 = EDGE_LOOP('',(#116694,#116695,#116696,#116704)); +#116694 = ORIENTED_EDGE('',*,*,#116673,.F.); +#116695 = ORIENTED_EDGE('',*,*,#115356,.T.); +#116696 = ORIENTED_EDGE('',*,*,#116697,.T.); +#116697 = EDGE_CURVE('',#115349,#116698,#116700,.T.); +#116698 = VERTEX_POINT('',#116699); +#116699 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#116700 = LINE('',#116701,#116702); +#116701 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#116702 = VECTOR('',#116703,1.); +#116703 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116704 = ORIENTED_EDGE('',*,*,#116705,.F.); +#116705 = EDGE_CURVE('',#116674,#116698,#116706,.T.); +#116706 = LINE('',#116707,#116708); +#116707 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#116708 = VECTOR('',#116709,1.); +#116709 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116710 = PLANE('',#116711); +#116711 = AXIS2_PLACEMENT_3D('',#116712,#116713,#116714); +#116712 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#116713 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116714 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116715 = ADVANCED_FACE('',(#116716),#116734,.T.); +#116716 = FACE_BOUND('',#116717,.T.); +#116717 = EDGE_LOOP('',(#116718,#116719,#116720,#116728)); +#116718 = ORIENTED_EDGE('',*,*,#116697,.F.); +#116719 = ORIENTED_EDGE('',*,*,#115348,.T.); +#116720 = ORIENTED_EDGE('',*,*,#116721,.T.); +#116721 = EDGE_CURVE('',#115341,#116722,#116724,.T.); +#116722 = VERTEX_POINT('',#116723); +#116723 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#116724 = LINE('',#116725,#116726); +#116725 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#116726 = VECTOR('',#116727,1.); +#116727 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116728 = ORIENTED_EDGE('',*,*,#116729,.F.); +#116729 = EDGE_CURVE('',#116698,#116722,#116730,.T.); +#116730 = LINE('',#116731,#116732); +#116731 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#116732 = VECTOR('',#116733,1.); +#116733 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116734 = PLANE('',#116735); +#116735 = AXIS2_PLACEMENT_3D('',#116736,#116737,#116738); +#116736 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#116737 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116738 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116739 = ADVANCED_FACE('',(#116740),#116751,.T.); +#116740 = FACE_BOUND('',#116741,.T.); +#116741 = EDGE_LOOP('',(#116742,#116743,#116744,#116745)); +#116742 = ORIENTED_EDGE('',*,*,#116721,.F.); +#116743 = ORIENTED_EDGE('',*,*,#115340,.T.); +#116744 = ORIENTED_EDGE('',*,*,#116664,.T.); +#116745 = ORIENTED_EDGE('',*,*,#116746,.F.); +#116746 = EDGE_CURVE('',#116722,#116665,#116747,.T.); +#116747 = LINE('',#116748,#116749); +#116748 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#116749 = VECTOR('',#116750,1.); +#116750 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116751 = PLANE('',#116752); +#116752 = AXIS2_PLACEMENT_3D('',#116753,#116754,#116755); +#116753 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#116754 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116755 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116756 = ADVANCED_FACE('',(#116757),#116782,.T.); +#116757 = FACE_BOUND('',#116758,.T.); +#116758 = EDGE_LOOP('',(#116759,#116767,#116768,#116776)); +#116759 = ORIENTED_EDGE('',*,*,#116760,.F.); +#116760 = EDGE_CURVE('',#115365,#116761,#116763,.T.); +#116761 = VERTEX_POINT('',#116762); +#116762 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#116763 = LINE('',#116764,#116765); +#116764 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#116765 = VECTOR('',#116766,1.); +#116766 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116767 = ORIENTED_EDGE('',*,*,#115364,.T.); +#116768 = ORIENTED_EDGE('',*,*,#116769,.T.); +#116769 = EDGE_CURVE('',#115367,#116770,#116772,.T.); +#116770 = VERTEX_POINT('',#116771); +#116771 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#116772 = LINE('',#116773,#116774); +#116773 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#116774 = VECTOR('',#116775,1.); +#116775 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116776 = ORIENTED_EDGE('',*,*,#116777,.F.); +#116777 = EDGE_CURVE('',#116761,#116770,#116778,.T.); +#116778 = LINE('',#116779,#116780); +#116779 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#116780 = VECTOR('',#116781,1.); +#116781 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116782 = PLANE('',#116783); +#116783 = AXIS2_PLACEMENT_3D('',#116784,#116785,#116786); +#116784 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#116785 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116786 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116787 = ADVANCED_FACE('',(#116788),#116806,.T.); +#116788 = FACE_BOUND('',#116789,.T.); +#116789 = EDGE_LOOP('',(#116790,#116791,#116792,#116800)); +#116790 = ORIENTED_EDGE('',*,*,#116769,.F.); +#116791 = ORIENTED_EDGE('',*,*,#115390,.T.); +#116792 = ORIENTED_EDGE('',*,*,#116793,.T.); +#116793 = EDGE_CURVE('',#115383,#116794,#116796,.T.); +#116794 = VERTEX_POINT('',#116795); +#116795 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#116796 = LINE('',#116797,#116798); +#116797 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#116798 = VECTOR('',#116799,1.); +#116799 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116800 = ORIENTED_EDGE('',*,*,#116801,.F.); +#116801 = EDGE_CURVE('',#116770,#116794,#116802,.T.); +#116802 = LINE('',#116803,#116804); +#116803 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#116804 = VECTOR('',#116805,1.); +#116805 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116806 = PLANE('',#116807); +#116807 = AXIS2_PLACEMENT_3D('',#116808,#116809,#116810); +#116808 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#116809 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116810 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116811 = ADVANCED_FACE('',(#116812),#116830,.T.); +#116812 = FACE_BOUND('',#116813,.T.); +#116813 = EDGE_LOOP('',(#116814,#116815,#116816,#116824)); +#116814 = ORIENTED_EDGE('',*,*,#116793,.F.); +#116815 = ORIENTED_EDGE('',*,*,#115382,.T.); +#116816 = ORIENTED_EDGE('',*,*,#116817,.T.); +#116817 = EDGE_CURVE('',#115375,#116818,#116820,.T.); +#116818 = VERTEX_POINT('',#116819); +#116819 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#116820 = LINE('',#116821,#116822); +#116821 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#116822 = VECTOR('',#116823,1.); +#116823 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116824 = ORIENTED_EDGE('',*,*,#116825,.F.); +#116825 = EDGE_CURVE('',#116794,#116818,#116826,.T.); +#116826 = LINE('',#116827,#116828); +#116827 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#116828 = VECTOR('',#116829,1.); +#116829 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116830 = PLANE('',#116831); +#116831 = AXIS2_PLACEMENT_3D('',#116832,#116833,#116834); +#116832 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#116833 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116834 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116835 = ADVANCED_FACE('',(#116836),#116847,.T.); +#116836 = FACE_BOUND('',#116837,.T.); +#116837 = EDGE_LOOP('',(#116838,#116839,#116840,#116841)); +#116838 = ORIENTED_EDGE('',*,*,#116817,.F.); +#116839 = ORIENTED_EDGE('',*,*,#115374,.T.); +#116840 = ORIENTED_EDGE('',*,*,#116760,.T.); +#116841 = ORIENTED_EDGE('',*,*,#116842,.F.); +#116842 = EDGE_CURVE('',#116818,#116761,#116843,.T.); +#116843 = LINE('',#116844,#116845); +#116844 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#116845 = VECTOR('',#116846,1.); +#116846 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116847 = PLANE('',#116848); +#116848 = AXIS2_PLACEMENT_3D('',#116849,#116850,#116851); +#116849 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#116850 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116851 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116852 = ADVANCED_FACE('',(#116853),#116878,.T.); +#116853 = FACE_BOUND('',#116854,.T.); +#116854 = EDGE_LOOP('',(#116855,#116863,#116864,#116872)); +#116855 = ORIENTED_EDGE('',*,*,#116856,.F.); +#116856 = EDGE_CURVE('',#115399,#116857,#116859,.T.); +#116857 = VERTEX_POINT('',#116858); +#116858 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#116859 = LINE('',#116860,#116861); +#116860 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#116861 = VECTOR('',#116862,1.); +#116862 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116863 = ORIENTED_EDGE('',*,*,#115398,.T.); +#116864 = ORIENTED_EDGE('',*,*,#116865,.T.); +#116865 = EDGE_CURVE('',#115401,#116866,#116868,.T.); +#116866 = VERTEX_POINT('',#116867); +#116867 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#116868 = LINE('',#116869,#116870); +#116869 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#116870 = VECTOR('',#116871,1.); +#116871 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116872 = ORIENTED_EDGE('',*,*,#116873,.F.); +#116873 = EDGE_CURVE('',#116857,#116866,#116874,.T.); +#116874 = LINE('',#116875,#116876); +#116875 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#116876 = VECTOR('',#116877,1.); +#116877 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116878 = PLANE('',#116879); +#116879 = AXIS2_PLACEMENT_3D('',#116880,#116881,#116882); +#116880 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#116881 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116882 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116883 = ADVANCED_FACE('',(#116884),#116902,.T.); +#116884 = FACE_BOUND('',#116885,.T.); +#116885 = EDGE_LOOP('',(#116886,#116887,#116888,#116896)); +#116886 = ORIENTED_EDGE('',*,*,#116865,.F.); +#116887 = ORIENTED_EDGE('',*,*,#115424,.T.); +#116888 = ORIENTED_EDGE('',*,*,#116889,.T.); +#116889 = EDGE_CURVE('',#115417,#116890,#116892,.T.); +#116890 = VERTEX_POINT('',#116891); +#116891 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#116892 = LINE('',#116893,#116894); +#116893 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#116894 = VECTOR('',#116895,1.); +#116895 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116896 = ORIENTED_EDGE('',*,*,#116897,.F.); +#116897 = EDGE_CURVE('',#116866,#116890,#116898,.T.); +#116898 = LINE('',#116899,#116900); +#116899 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#116900 = VECTOR('',#116901,1.); +#116901 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116902 = PLANE('',#116903); +#116903 = AXIS2_PLACEMENT_3D('',#116904,#116905,#116906); +#116904 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#116905 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116906 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116907 = ADVANCED_FACE('',(#116908),#116926,.T.); +#116908 = FACE_BOUND('',#116909,.T.); +#116909 = EDGE_LOOP('',(#116910,#116911,#116912,#116920)); +#116910 = ORIENTED_EDGE('',*,*,#116889,.F.); +#116911 = ORIENTED_EDGE('',*,*,#115416,.T.); +#116912 = ORIENTED_EDGE('',*,*,#116913,.T.); +#116913 = EDGE_CURVE('',#115409,#116914,#116916,.T.); +#116914 = VERTEX_POINT('',#116915); +#116915 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#116916 = LINE('',#116917,#116918); +#116917 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#116918 = VECTOR('',#116919,1.); +#116919 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116920 = ORIENTED_EDGE('',*,*,#116921,.F.); +#116921 = EDGE_CURVE('',#116890,#116914,#116922,.T.); +#116922 = LINE('',#116923,#116924); +#116923 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#116924 = VECTOR('',#116925,1.); +#116925 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116926 = PLANE('',#116927); +#116927 = AXIS2_PLACEMENT_3D('',#116928,#116929,#116930); +#116928 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#116929 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116930 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116931 = ADVANCED_FACE('',(#116932),#116943,.T.); +#116932 = FACE_BOUND('',#116933,.T.); +#116933 = EDGE_LOOP('',(#116934,#116935,#116936,#116937)); +#116934 = ORIENTED_EDGE('',*,*,#116913,.F.); +#116935 = ORIENTED_EDGE('',*,*,#115408,.T.); +#116936 = ORIENTED_EDGE('',*,*,#116856,.T.); +#116937 = ORIENTED_EDGE('',*,*,#116938,.F.); +#116938 = EDGE_CURVE('',#116914,#116857,#116939,.T.); +#116939 = LINE('',#116940,#116941); +#116940 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#116941 = VECTOR('',#116942,1.); +#116942 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116943 = PLANE('',#116944); +#116944 = AXIS2_PLACEMENT_3D('',#116945,#116946,#116947); +#116945 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#116946 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116947 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116948 = ADVANCED_FACE('',(#116949),#116974,.T.); +#116949 = FACE_BOUND('',#116950,.T.); +#116950 = EDGE_LOOP('',(#116951,#116959,#116960,#116968)); +#116951 = ORIENTED_EDGE('',*,*,#116952,.F.); +#116952 = EDGE_CURVE('',#115433,#116953,#116955,.T.); +#116953 = VERTEX_POINT('',#116954); +#116954 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#116955 = LINE('',#116956,#116957); +#116956 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#116957 = VECTOR('',#116958,1.); +#116958 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116959 = ORIENTED_EDGE('',*,*,#115432,.T.); +#116960 = ORIENTED_EDGE('',*,*,#116961,.T.); +#116961 = EDGE_CURVE('',#115435,#116962,#116964,.T.); +#116962 = VERTEX_POINT('',#116963); +#116963 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#116964 = LINE('',#116965,#116966); +#116965 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#116966 = VECTOR('',#116967,1.); +#116967 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116968 = ORIENTED_EDGE('',*,*,#116969,.F.); +#116969 = EDGE_CURVE('',#116953,#116962,#116970,.T.); +#116970 = LINE('',#116971,#116972); +#116971 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#116972 = VECTOR('',#116973,1.); +#116973 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116974 = PLANE('',#116975); +#116975 = AXIS2_PLACEMENT_3D('',#116976,#116977,#116978); +#116976 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#116977 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116978 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116979 = ADVANCED_FACE('',(#116980),#116998,.T.); +#116980 = FACE_BOUND('',#116981,.T.); +#116981 = EDGE_LOOP('',(#116982,#116983,#116984,#116992)); +#116982 = ORIENTED_EDGE('',*,*,#116961,.F.); +#116983 = ORIENTED_EDGE('',*,*,#115458,.T.); +#116984 = ORIENTED_EDGE('',*,*,#116985,.T.); +#116985 = EDGE_CURVE('',#115451,#116986,#116988,.T.); +#116986 = VERTEX_POINT('',#116987); +#116987 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#116988 = LINE('',#116989,#116990); +#116989 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#116990 = VECTOR('',#116991,1.); +#116991 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116992 = ORIENTED_EDGE('',*,*,#116993,.F.); +#116993 = EDGE_CURVE('',#116962,#116986,#116994,.T.); +#116994 = LINE('',#116995,#116996); +#116995 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#116996 = VECTOR('',#116997,1.); +#116997 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116998 = PLANE('',#116999); +#116999 = AXIS2_PLACEMENT_3D('',#117000,#117001,#117002); +#117000 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#117001 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#117002 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#117003 = ADVANCED_FACE('',(#117004),#117022,.T.); +#117004 = FACE_BOUND('',#117005,.T.); +#117005 = EDGE_LOOP('',(#117006,#117007,#117008,#117016)); +#117006 = ORIENTED_EDGE('',*,*,#116985,.F.); +#117007 = ORIENTED_EDGE('',*,*,#115450,.T.); +#117008 = ORIENTED_EDGE('',*,*,#117009,.T.); +#117009 = EDGE_CURVE('',#115443,#117010,#117012,.T.); +#117010 = VERTEX_POINT('',#117011); +#117011 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#117012 = LINE('',#117013,#117014); +#117013 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#117014 = VECTOR('',#117015,1.); +#117015 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#117016 = ORIENTED_EDGE('',*,*,#117017,.F.); +#117017 = EDGE_CURVE('',#116986,#117010,#117018,.T.); +#117018 = LINE('',#117019,#117020); +#117019 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#117020 = VECTOR('',#117021,1.); +#117021 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117022 = PLANE('',#117023); +#117023 = AXIS2_PLACEMENT_3D('',#117024,#117025,#117026); +#117024 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#117025 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#117026 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#117027 = ADVANCED_FACE('',(#117028),#117039,.T.); +#117028 = FACE_BOUND('',#117029,.T.); +#117029 = EDGE_LOOP('',(#117030,#117031,#117032,#117033)); +#117030 = ORIENTED_EDGE('',*,*,#117009,.F.); +#117031 = ORIENTED_EDGE('',*,*,#115442,.T.); +#117032 = ORIENTED_EDGE('',*,*,#116952,.T.); +#117033 = ORIENTED_EDGE('',*,*,#117034,.F.); +#117034 = EDGE_CURVE('',#117010,#116953,#117035,.T.); +#117035 = LINE('',#117036,#117037); +#117036 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#117037 = VECTOR('',#117038,1.); +#117038 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117039 = PLANE('',#117040); +#117040 = AXIS2_PLACEMENT_3D('',#117041,#117042,#117043); +#117041 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#117042 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#117043 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#117044 = ADVANCED_FACE('',(#117045),#117070,.T.); +#117045 = FACE_BOUND('',#117046,.T.); +#117046 = EDGE_LOOP('',(#117047,#117055,#117056,#117064)); +#117047 = ORIENTED_EDGE('',*,*,#117048,.F.); +#117048 = EDGE_CURVE('',#115467,#117049,#117051,.T.); +#117049 = VERTEX_POINT('',#117050); +#117050 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#117051 = LINE('',#117052,#117053); +#117052 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#117053 = VECTOR('',#117054,1.); +#117054 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#117055 = ORIENTED_EDGE('',*,*,#115466,.T.); +#117056 = ORIENTED_EDGE('',*,*,#117057,.T.); +#117057 = EDGE_CURVE('',#115469,#117058,#117060,.T.); +#117058 = VERTEX_POINT('',#117059); +#117059 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#117060 = LINE('',#117061,#117062); +#117061 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#117062 = VECTOR('',#117063,1.); +#117063 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#117064 = ORIENTED_EDGE('',*,*,#117065,.F.); +#117065 = EDGE_CURVE('',#117049,#117058,#117066,.T.); +#117066 = LINE('',#117067,#117068); +#117067 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#117068 = VECTOR('',#117069,1.); +#117069 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117070 = PLANE('',#117071); +#117071 = AXIS2_PLACEMENT_3D('',#117072,#117073,#117074); +#117072 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#117073 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#117074 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#117075 = ADVANCED_FACE('',(#117076),#117094,.T.); +#117076 = FACE_BOUND('',#117077,.T.); +#117077 = EDGE_LOOP('',(#117078,#117079,#117080,#117088)); +#117078 = ORIENTED_EDGE('',*,*,#117057,.F.); +#117079 = ORIENTED_EDGE('',*,*,#115492,.T.); +#117080 = ORIENTED_EDGE('',*,*,#117081,.T.); +#117081 = EDGE_CURVE('',#115485,#117082,#117084,.T.); +#117082 = VERTEX_POINT('',#117083); +#117083 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#117084 = LINE('',#117085,#117086); +#117085 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#117086 = VECTOR('',#117087,1.); +#117087 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#117088 = ORIENTED_EDGE('',*,*,#117089,.F.); +#117089 = EDGE_CURVE('',#117058,#117082,#117090,.T.); +#117090 = LINE('',#117091,#117092); +#117091 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#117092 = VECTOR('',#117093,1.); +#117093 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117094 = PLANE('',#117095); +#117095 = AXIS2_PLACEMENT_3D('',#117096,#117097,#117098); +#117096 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#117097 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#117098 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#117099 = ADVANCED_FACE('',(#117100),#117118,.T.); +#117100 = FACE_BOUND('',#117101,.T.); +#117101 = EDGE_LOOP('',(#117102,#117103,#117104,#117112)); +#117102 = ORIENTED_EDGE('',*,*,#117081,.F.); +#117103 = ORIENTED_EDGE('',*,*,#115484,.T.); +#117104 = ORIENTED_EDGE('',*,*,#117105,.T.); +#117105 = EDGE_CURVE('',#115477,#117106,#117108,.T.); +#117106 = VERTEX_POINT('',#117107); +#117107 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#117108 = LINE('',#117109,#117110); +#117109 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#117110 = VECTOR('',#117111,1.); +#117111 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#117112 = ORIENTED_EDGE('',*,*,#117113,.F.); +#117113 = EDGE_CURVE('',#117082,#117106,#117114,.T.); +#117114 = LINE('',#117115,#117116); +#117115 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#117116 = VECTOR('',#117117,1.); +#117117 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117118 = PLANE('',#117119); +#117119 = AXIS2_PLACEMENT_3D('',#117120,#117121,#117122); +#117120 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#117121 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#117122 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#117123 = ADVANCED_FACE('',(#117124),#117135,.T.); +#117124 = FACE_BOUND('',#117125,.T.); +#117125 = EDGE_LOOP('',(#117126,#117127,#117128,#117129)); +#117126 = ORIENTED_EDGE('',*,*,#117105,.F.); +#117127 = ORIENTED_EDGE('',*,*,#115476,.T.); +#117128 = ORIENTED_EDGE('',*,*,#117048,.T.); +#117129 = ORIENTED_EDGE('',*,*,#117130,.F.); +#117130 = EDGE_CURVE('',#117106,#117049,#117131,.T.); +#117131 = LINE('',#117132,#117133); +#117132 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#117133 = VECTOR('',#117134,1.); +#117134 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117135 = PLANE('',#117136); +#117136 = AXIS2_PLACEMENT_3D('',#117137,#117138,#117139); +#117137 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#117138 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#117139 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#117140 = ADVANCED_FACE('',(#117141),#117166,.T.); +#117141 = FACE_BOUND('',#117142,.T.); +#117142 = EDGE_LOOP('',(#117143,#117151,#117152,#117160)); +#117143 = ORIENTED_EDGE('',*,*,#117144,.F.); +#117144 = EDGE_CURVE('',#115501,#117145,#117147,.T.); +#117145 = VERTEX_POINT('',#117146); +#117146 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#117147 = LINE('',#117148,#117149); +#117148 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#117149 = VECTOR('',#117150,1.); +#117150 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#117151 = ORIENTED_EDGE('',*,*,#115500,.T.); +#117152 = ORIENTED_EDGE('',*,*,#117153,.T.); +#117153 = EDGE_CURVE('',#115503,#117154,#117156,.T.); +#117154 = VERTEX_POINT('',#117155); +#117155 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#117156 = LINE('',#117157,#117158); +#117157 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#117158 = VECTOR('',#117159,1.); +#117159 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#117160 = ORIENTED_EDGE('',*,*,#117161,.F.); +#117161 = EDGE_CURVE('',#117145,#117154,#117162,.T.); +#117162 = LINE('',#117163,#117164); +#117163 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#117164 = VECTOR('',#117165,1.); +#117165 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117166 = PLANE('',#117167); +#117167 = AXIS2_PLACEMENT_3D('',#117168,#117169,#117170); +#117168 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#117169 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#117170 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#117171 = ADVANCED_FACE('',(#117172),#117190,.T.); +#117172 = FACE_BOUND('',#117173,.T.); +#117173 = EDGE_LOOP('',(#117174,#117175,#117176,#117184)); +#117174 = ORIENTED_EDGE('',*,*,#117153,.F.); +#117175 = ORIENTED_EDGE('',*,*,#115526,.T.); +#117176 = ORIENTED_EDGE('',*,*,#117177,.T.); +#117177 = EDGE_CURVE('',#115519,#117178,#117180,.T.); +#117178 = VERTEX_POINT('',#117179); +#117179 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#117180 = LINE('',#117181,#117182); +#117181 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#117182 = VECTOR('',#117183,1.); +#117183 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#117184 = ORIENTED_EDGE('',*,*,#117185,.F.); +#117185 = EDGE_CURVE('',#117154,#117178,#117186,.T.); +#117186 = LINE('',#117187,#117188); +#117187 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#117188 = VECTOR('',#117189,1.); +#117189 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117190 = PLANE('',#117191); +#117191 = AXIS2_PLACEMENT_3D('',#117192,#117193,#117194); +#117192 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#117193 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#117194 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#117195 = ADVANCED_FACE('',(#117196),#117214,.T.); +#117196 = FACE_BOUND('',#117197,.T.); +#117197 = EDGE_LOOP('',(#117198,#117199,#117200,#117208)); +#117198 = ORIENTED_EDGE('',*,*,#117177,.F.); +#117199 = ORIENTED_EDGE('',*,*,#115518,.T.); +#117200 = ORIENTED_EDGE('',*,*,#117201,.T.); +#117201 = EDGE_CURVE('',#115511,#117202,#117204,.T.); +#117202 = VERTEX_POINT('',#117203); +#117203 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#117204 = LINE('',#117205,#117206); +#117205 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#117206 = VECTOR('',#117207,1.); +#117207 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#117208 = ORIENTED_EDGE('',*,*,#117209,.F.); +#117209 = EDGE_CURVE('',#117178,#117202,#117210,.T.); +#117210 = LINE('',#117211,#117212); +#117211 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#117212 = VECTOR('',#117213,1.); +#117213 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117214 = PLANE('',#117215); +#117215 = AXIS2_PLACEMENT_3D('',#117216,#117217,#117218); +#117216 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#117217 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#117218 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#117219 = ADVANCED_FACE('',(#117220),#117231,.T.); +#117220 = FACE_BOUND('',#117221,.T.); +#117221 = EDGE_LOOP('',(#117222,#117223,#117224,#117225)); +#117222 = ORIENTED_EDGE('',*,*,#117201,.F.); +#117223 = ORIENTED_EDGE('',*,*,#115510,.T.); +#117224 = ORIENTED_EDGE('',*,*,#117144,.T.); +#117225 = ORIENTED_EDGE('',*,*,#117226,.F.); +#117226 = EDGE_CURVE('',#117202,#117145,#117227,.T.); +#117227 = LINE('',#117228,#117229); +#117228 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#117229 = VECTOR('',#117230,1.); +#117230 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117231 = PLANE('',#117232); +#117232 = AXIS2_PLACEMENT_3D('',#117233,#117234,#117235); +#117233 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#117234 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#117235 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#117236 = ADVANCED_FACE('',(#117237),#117248,.T.); +#117237 = FACE_BOUND('',#117238,.T.); +#117238 = EDGE_LOOP('',(#117239,#117240,#117241,#117247)); +#117239 = ORIENTED_EDGE('',*,*,#115590,.F.); +#117240 = ORIENTED_EDGE('',*,*,#115600,.T.); +#117241 = ORIENTED_EDGE('',*,*,#117242,.T.); +#117242 = EDGE_CURVE('',#115601,#115641,#117243,.T.); +#117243 = LINE('',#117244,#117245); +#117244 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#117245 = VECTOR('',#117246,1.); +#117246 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117247 = ORIENTED_EDGE('',*,*,#115648,.T.); +#117248 = PLANE('',#117249); +#117249 = AXIS2_PLACEMENT_3D('',#117250,#117251,#117252); +#117250 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#117251 = DIRECTION('',(0.,-0.,-1.)); +#117252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117253 = ADVANCED_FACE('',(#117254),#117295,.F.); +#117254 = FACE_BOUND('',#117255,.F.); +#117255 = EDGE_LOOP('',(#117256,#117264,#117265,#117273,#117281,#117289) + ); +#117256 = ORIENTED_EDGE('',*,*,#117257,.T.); +#117257 = EDGE_CURVE('',#117258,#115641,#117260,.T.); +#117258 = VERTEX_POINT('',#117259); +#117259 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#117260 = LINE('',#117261,#117262); +#117261 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#117262 = VECTOR('',#117263,1.); +#117263 = DIRECTION('',(0.,0.,1.)); +#117264 = ORIENTED_EDGE('',*,*,#115640,.F.); +#117265 = ORIENTED_EDGE('',*,*,#117266,.T.); +#117266 = EDGE_CURVE('',#115633,#117267,#117269,.T.); +#117267 = VERTEX_POINT('',#117268); +#117268 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#117269 = LINE('',#117270,#117271); +#117270 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#117271 = VECTOR('',#117272,1.); +#117272 = DIRECTION('',(0.,0.,-1.)); +#117273 = ORIENTED_EDGE('',*,*,#117274,.T.); +#117274 = EDGE_CURVE('',#117267,#117275,#117277,.T.); +#117275 = VERTEX_POINT('',#117276); +#117276 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#117277 = LINE('',#117278,#117279); +#117278 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#117279 = VECTOR('',#117280,1.); +#117280 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117281 = ORIENTED_EDGE('',*,*,#117282,.T.); +#117282 = EDGE_CURVE('',#117275,#117283,#117285,.T.); +#117283 = VERTEX_POINT('',#117284); +#117284 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#117285 = LINE('',#117286,#117287); +#117286 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#117287 = VECTOR('',#117288,1.); +#117288 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117289 = ORIENTED_EDGE('',*,*,#117290,.T.); +#117290 = EDGE_CURVE('',#117283,#117258,#117291,.T.); +#117291 = LINE('',#117292,#117293); +#117292 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#117293 = VECTOR('',#117294,1.); +#117294 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117295 = PLANE('',#117296); +#117296 = AXIS2_PLACEMENT_3D('',#117297,#117298,#117299); +#117297 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#117298 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117299 = DIRECTION('',(0.,0.,1.)); +#117300 = ADVANCED_FACE('',(#117301),#117312,.T.); +#117301 = FACE_BOUND('',#117302,.T.); +#117302 = EDGE_LOOP('',(#117303,#117309,#117310,#117311)); +#117303 = ORIENTED_EDGE('',*,*,#117304,.F.); +#117304 = EDGE_CURVE('',#115609,#115633,#117305,.T.); +#117305 = LINE('',#117306,#117307); +#117306 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#117307 = VECTOR('',#117308,1.); +#117308 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117309 = ORIENTED_EDGE('',*,*,#115616,.T.); +#117310 = ORIENTED_EDGE('',*,*,#115624,.T.); +#117311 = ORIENTED_EDGE('',*,*,#115632,.T.); +#117312 = PLANE('',#117313); +#117313 = AXIS2_PLACEMENT_3D('',#117314,#117315,#117316); +#117314 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#117315 = DIRECTION('',(0.,-0.,-1.)); +#117316 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117317 = ADVANCED_FACE('',(#117318),#117359,.T.); +#117318 = FACE_BOUND('',#117319,.T.); +#117319 = EDGE_LOOP('',(#117320,#117328,#117329,#117337,#117345,#117353) + ); +#117320 = ORIENTED_EDGE('',*,*,#117321,.T.); +#117321 = EDGE_CURVE('',#117322,#115601,#117324,.T.); +#117322 = VERTEX_POINT('',#117323); +#117323 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#117324 = LINE('',#117325,#117326); +#117325 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#117326 = VECTOR('',#117327,1.); +#117327 = DIRECTION('',(0.,0.,1.)); +#117328 = ORIENTED_EDGE('',*,*,#115608,.F.); +#117329 = ORIENTED_EDGE('',*,*,#117330,.T.); +#117330 = EDGE_CURVE('',#115609,#117331,#117333,.T.); +#117331 = VERTEX_POINT('',#117332); +#117332 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#117333 = LINE('',#117334,#117335); +#117334 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#117335 = VECTOR('',#117336,1.); +#117336 = DIRECTION('',(0.,0.,-1.)); +#117337 = ORIENTED_EDGE('',*,*,#117338,.T.); +#117338 = EDGE_CURVE('',#117331,#117339,#117341,.T.); +#117339 = VERTEX_POINT('',#117340); +#117340 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#117341 = LINE('',#117342,#117343); +#117342 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#117343 = VECTOR('',#117344,1.); +#117344 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117345 = ORIENTED_EDGE('',*,*,#117346,.F.); +#117346 = EDGE_CURVE('',#117347,#117339,#117349,.T.); +#117347 = VERTEX_POINT('',#117348); +#117348 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#117349 = LINE('',#117350,#117351); +#117350 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#117351 = VECTOR('',#117352,1.); +#117352 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117353 = ORIENTED_EDGE('',*,*,#117354,.T.); +#117354 = EDGE_CURVE('',#117347,#117322,#117355,.T.); +#117355 = LINE('',#117356,#117357); +#117356 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#117357 = VECTOR('',#117358,1.); +#117358 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117359 = PLANE('',#117360); +#117360 = AXIS2_PLACEMENT_3D('',#117361,#117362,#117363); +#117361 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#117362 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117363 = DIRECTION('',(0.,0.,1.)); +#117364 = ADVANCED_FACE('',(#117365),#117376,.T.); +#117365 = FACE_BOUND('',#117366,.T.); +#117366 = EDGE_LOOP('',(#117367,#117368,#117369,#117375)); +#117367 = ORIENTED_EDGE('',*,*,#115656,.F.); +#117368 = ORIENTED_EDGE('',*,*,#115666,.T.); +#117369 = ORIENTED_EDGE('',*,*,#117370,.T.); +#117370 = EDGE_CURVE('',#115667,#115707,#117371,.T.); +#117371 = LINE('',#117372,#117373); +#117372 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#117373 = VECTOR('',#117374,1.); +#117374 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117375 = ORIENTED_EDGE('',*,*,#115714,.T.); +#117376 = PLANE('',#117377); +#117377 = AXIS2_PLACEMENT_3D('',#117378,#117379,#117380); +#117378 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#117379 = DIRECTION('',(0.,-0.,-1.)); +#117380 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117381 = ADVANCED_FACE('',(#117382),#117423,.F.); +#117382 = FACE_BOUND('',#117383,.F.); +#117383 = EDGE_LOOP('',(#117384,#117392,#117393,#117401,#117409,#117417) + ); +#117384 = ORIENTED_EDGE('',*,*,#117385,.T.); +#117385 = EDGE_CURVE('',#117386,#115707,#117388,.T.); +#117386 = VERTEX_POINT('',#117387); +#117387 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#117388 = LINE('',#117389,#117390); +#117389 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#117390 = VECTOR('',#117391,1.); +#117391 = DIRECTION('',(0.,0.,1.)); +#117392 = ORIENTED_EDGE('',*,*,#115706,.F.); +#117393 = ORIENTED_EDGE('',*,*,#117394,.T.); +#117394 = EDGE_CURVE('',#115699,#117395,#117397,.T.); +#117395 = VERTEX_POINT('',#117396); +#117396 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#117397 = LINE('',#117398,#117399); +#117398 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#117399 = VECTOR('',#117400,1.); +#117400 = DIRECTION('',(0.,0.,-1.)); +#117401 = ORIENTED_EDGE('',*,*,#117402,.T.); +#117402 = EDGE_CURVE('',#117395,#117403,#117405,.T.); +#117403 = VERTEX_POINT('',#117404); +#117404 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#117405 = LINE('',#117406,#117407); +#117406 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#117407 = VECTOR('',#117408,1.); +#117408 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117409 = ORIENTED_EDGE('',*,*,#117410,.T.); +#117410 = EDGE_CURVE('',#117403,#117411,#117413,.T.); +#117411 = VERTEX_POINT('',#117412); +#117412 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#117413 = LINE('',#117414,#117415); +#117414 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#117415 = VECTOR('',#117416,1.); +#117416 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117417 = ORIENTED_EDGE('',*,*,#117418,.T.); +#117418 = EDGE_CURVE('',#117411,#117386,#117419,.T.); +#117419 = LINE('',#117420,#117421); +#117420 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#117421 = VECTOR('',#117422,1.); +#117422 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117423 = PLANE('',#117424); +#117424 = AXIS2_PLACEMENT_3D('',#117425,#117426,#117427); +#117425 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#117426 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117427 = DIRECTION('',(0.,0.,1.)); +#117428 = ADVANCED_FACE('',(#117429),#117440,.T.); +#117429 = FACE_BOUND('',#117430,.T.); +#117430 = EDGE_LOOP('',(#117431,#117437,#117438,#117439)); +#117431 = ORIENTED_EDGE('',*,*,#117432,.F.); +#117432 = EDGE_CURVE('',#115675,#115699,#117433,.T.); +#117433 = LINE('',#117434,#117435); +#117434 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#117435 = VECTOR('',#117436,1.); +#117436 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117437 = ORIENTED_EDGE('',*,*,#115682,.T.); +#117438 = ORIENTED_EDGE('',*,*,#115690,.T.); +#117439 = ORIENTED_EDGE('',*,*,#115698,.T.); +#117440 = PLANE('',#117441); +#117441 = AXIS2_PLACEMENT_3D('',#117442,#117443,#117444); +#117442 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#117443 = DIRECTION('',(0.,-0.,-1.)); +#117444 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117445 = ADVANCED_FACE('',(#117446),#117487,.T.); +#117446 = FACE_BOUND('',#117447,.T.); +#117447 = EDGE_LOOP('',(#117448,#117456,#117457,#117465,#117473,#117481) + ); +#117448 = ORIENTED_EDGE('',*,*,#117449,.T.); +#117449 = EDGE_CURVE('',#117450,#115667,#117452,.T.); +#117450 = VERTEX_POINT('',#117451); +#117451 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#117452 = LINE('',#117453,#117454); +#117453 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#117454 = VECTOR('',#117455,1.); +#117455 = DIRECTION('',(0.,0.,1.)); +#117456 = ORIENTED_EDGE('',*,*,#115674,.F.); +#117457 = ORIENTED_EDGE('',*,*,#117458,.T.); +#117458 = EDGE_CURVE('',#115675,#117459,#117461,.T.); +#117459 = VERTEX_POINT('',#117460); +#117460 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#117461 = LINE('',#117462,#117463); +#117462 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#117463 = VECTOR('',#117464,1.); +#117464 = DIRECTION('',(0.,0.,-1.)); +#117465 = ORIENTED_EDGE('',*,*,#117466,.T.); +#117466 = EDGE_CURVE('',#117459,#117467,#117469,.T.); +#117467 = VERTEX_POINT('',#117468); +#117468 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#117469 = LINE('',#117470,#117471); +#117470 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#117471 = VECTOR('',#117472,1.); +#117472 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117473 = ORIENTED_EDGE('',*,*,#117474,.F.); +#117474 = EDGE_CURVE('',#117475,#117467,#117477,.T.); +#117475 = VERTEX_POINT('',#117476); +#117476 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#117477 = LINE('',#117478,#117479); +#117478 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#117479 = VECTOR('',#117480,1.); +#117480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117481 = ORIENTED_EDGE('',*,*,#117482,.T.); +#117482 = EDGE_CURVE('',#117475,#117450,#117483,.T.); +#117483 = LINE('',#117484,#117485); +#117484 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#117485 = VECTOR('',#117486,1.); +#117486 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117487 = PLANE('',#117488); +#117488 = AXIS2_PLACEMENT_3D('',#117489,#117490,#117491); +#117489 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#117490 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117491 = DIRECTION('',(0.,0.,1.)); +#117492 = ADVANCED_FACE('',(#117493),#117504,.T.); +#117493 = FACE_BOUND('',#117494,.T.); +#117494 = EDGE_LOOP('',(#117495,#117496,#117497,#117503)); +#117495 = ORIENTED_EDGE('',*,*,#115722,.F.); +#117496 = ORIENTED_EDGE('',*,*,#115732,.T.); +#117497 = ORIENTED_EDGE('',*,*,#117498,.T.); +#117498 = EDGE_CURVE('',#115733,#115773,#117499,.T.); +#117499 = LINE('',#117500,#117501); +#117500 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#117501 = VECTOR('',#117502,1.); +#117502 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117503 = ORIENTED_EDGE('',*,*,#115780,.T.); +#117504 = PLANE('',#117505); +#117505 = AXIS2_PLACEMENT_3D('',#117506,#117507,#117508); +#117506 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#117507 = DIRECTION('',(0.,-0.,-1.)); +#117508 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117509 = ADVANCED_FACE('',(#117510),#117551,.F.); +#117510 = FACE_BOUND('',#117511,.F.); +#117511 = EDGE_LOOP('',(#117512,#117520,#117521,#117529,#117537,#117545) + ); +#117512 = ORIENTED_EDGE('',*,*,#117513,.T.); +#117513 = EDGE_CURVE('',#117514,#115773,#117516,.T.); +#117514 = VERTEX_POINT('',#117515); +#117515 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#117516 = LINE('',#117517,#117518); +#117517 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#117518 = VECTOR('',#117519,1.); +#117519 = DIRECTION('',(0.,0.,1.)); +#117520 = ORIENTED_EDGE('',*,*,#115772,.F.); +#117521 = ORIENTED_EDGE('',*,*,#117522,.T.); +#117522 = EDGE_CURVE('',#115765,#117523,#117525,.T.); +#117523 = VERTEX_POINT('',#117524); +#117524 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#117525 = LINE('',#117526,#117527); +#117526 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#117527 = VECTOR('',#117528,1.); +#117528 = DIRECTION('',(0.,0.,-1.)); +#117529 = ORIENTED_EDGE('',*,*,#117530,.T.); +#117530 = EDGE_CURVE('',#117523,#117531,#117533,.T.); +#117531 = VERTEX_POINT('',#117532); +#117532 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#117533 = LINE('',#117534,#117535); +#117534 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#117535 = VECTOR('',#117536,1.); +#117536 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117537 = ORIENTED_EDGE('',*,*,#117538,.T.); +#117538 = EDGE_CURVE('',#117531,#117539,#117541,.T.); +#117539 = VERTEX_POINT('',#117540); +#117540 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#117541 = LINE('',#117542,#117543); +#117542 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#117543 = VECTOR('',#117544,1.); +#117544 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117545 = ORIENTED_EDGE('',*,*,#117546,.T.); +#117546 = EDGE_CURVE('',#117539,#117514,#117547,.T.); +#117547 = LINE('',#117548,#117549); +#117548 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#117549 = VECTOR('',#117550,1.); +#117550 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117551 = PLANE('',#117552); +#117552 = AXIS2_PLACEMENT_3D('',#117553,#117554,#117555); +#117553 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#117554 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117555 = DIRECTION('',(0.,0.,1.)); +#117556 = ADVANCED_FACE('',(#117557),#117568,.T.); +#117557 = FACE_BOUND('',#117558,.T.); +#117558 = EDGE_LOOP('',(#117559,#117565,#117566,#117567)); +#117559 = ORIENTED_EDGE('',*,*,#117560,.F.); +#117560 = EDGE_CURVE('',#115741,#115765,#117561,.T.); +#117561 = LINE('',#117562,#117563); +#117562 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#117563 = VECTOR('',#117564,1.); +#117564 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117565 = ORIENTED_EDGE('',*,*,#115748,.T.); +#117566 = ORIENTED_EDGE('',*,*,#115756,.T.); +#117567 = ORIENTED_EDGE('',*,*,#115764,.T.); +#117568 = PLANE('',#117569); +#117569 = AXIS2_PLACEMENT_3D('',#117570,#117571,#117572); +#117570 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#117571 = DIRECTION('',(0.,-0.,-1.)); +#117572 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117573 = ADVANCED_FACE('',(#117574),#117615,.T.); +#117574 = FACE_BOUND('',#117575,.T.); +#117575 = EDGE_LOOP('',(#117576,#117584,#117585,#117593,#117601,#117609) + ); +#117576 = ORIENTED_EDGE('',*,*,#117577,.T.); +#117577 = EDGE_CURVE('',#117578,#115733,#117580,.T.); +#117578 = VERTEX_POINT('',#117579); +#117579 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#117580 = LINE('',#117581,#117582); +#117581 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#117582 = VECTOR('',#117583,1.); +#117583 = DIRECTION('',(0.,0.,1.)); +#117584 = ORIENTED_EDGE('',*,*,#115740,.F.); +#117585 = ORIENTED_EDGE('',*,*,#117586,.T.); +#117586 = EDGE_CURVE('',#115741,#117587,#117589,.T.); +#117587 = VERTEX_POINT('',#117588); +#117588 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#117589 = LINE('',#117590,#117591); +#117590 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#117591 = VECTOR('',#117592,1.); +#117592 = DIRECTION('',(0.,0.,-1.)); +#117593 = ORIENTED_EDGE('',*,*,#117594,.T.); +#117594 = EDGE_CURVE('',#117587,#117595,#117597,.T.); +#117595 = VERTEX_POINT('',#117596); +#117596 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#117597 = LINE('',#117598,#117599); +#117598 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#117599 = VECTOR('',#117600,1.); +#117600 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117601 = ORIENTED_EDGE('',*,*,#117602,.F.); +#117602 = EDGE_CURVE('',#117603,#117595,#117605,.T.); +#117603 = VERTEX_POINT('',#117604); +#117604 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#117605 = LINE('',#117606,#117607); +#117606 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#117607 = VECTOR('',#117608,1.); +#117608 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117609 = ORIENTED_EDGE('',*,*,#117610,.T.); +#117610 = EDGE_CURVE('',#117603,#117578,#117611,.T.); +#117611 = LINE('',#117612,#117613); +#117612 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#117613 = VECTOR('',#117614,1.); +#117614 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117615 = PLANE('',#117616); +#117616 = AXIS2_PLACEMENT_3D('',#117617,#117618,#117619); +#117617 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#117618 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117619 = DIRECTION('',(0.,0.,1.)); +#117620 = ADVANCED_FACE('',(#117621),#117632,.T.); +#117621 = FACE_BOUND('',#117622,.T.); +#117622 = EDGE_LOOP('',(#117623,#117624,#117625,#117631)); +#117623 = ORIENTED_EDGE('',*,*,#115788,.F.); +#117624 = ORIENTED_EDGE('',*,*,#115798,.T.); +#117625 = ORIENTED_EDGE('',*,*,#117626,.T.); +#117626 = EDGE_CURVE('',#115799,#115839,#117627,.T.); +#117627 = LINE('',#117628,#117629); +#117628 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#117629 = VECTOR('',#117630,1.); +#117630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117631 = ORIENTED_EDGE('',*,*,#115846,.T.); +#117632 = PLANE('',#117633); +#117633 = AXIS2_PLACEMENT_3D('',#117634,#117635,#117636); +#117634 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#117635 = DIRECTION('',(0.,-0.,-1.)); +#117636 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117637 = ADVANCED_FACE('',(#117638),#117679,.F.); +#117638 = FACE_BOUND('',#117639,.F.); +#117639 = EDGE_LOOP('',(#117640,#117648,#117649,#117657,#117665,#117673) + ); +#117640 = ORIENTED_EDGE('',*,*,#117641,.T.); +#117641 = EDGE_CURVE('',#117642,#115839,#117644,.T.); +#117642 = VERTEX_POINT('',#117643); +#117643 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#117644 = LINE('',#117645,#117646); +#117645 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#117646 = VECTOR('',#117647,1.); +#117647 = DIRECTION('',(0.,0.,1.)); +#117648 = ORIENTED_EDGE('',*,*,#115838,.F.); +#117649 = ORIENTED_EDGE('',*,*,#117650,.T.); +#117650 = EDGE_CURVE('',#115831,#117651,#117653,.T.); +#117651 = VERTEX_POINT('',#117652); +#117652 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#117653 = LINE('',#117654,#117655); +#117654 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#117655 = VECTOR('',#117656,1.); +#117656 = DIRECTION('',(0.,0.,-1.)); +#117657 = ORIENTED_EDGE('',*,*,#117658,.T.); +#117658 = EDGE_CURVE('',#117651,#117659,#117661,.T.); +#117659 = VERTEX_POINT('',#117660); +#117660 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#117661 = LINE('',#117662,#117663); +#117662 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#117663 = VECTOR('',#117664,1.); +#117664 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117665 = ORIENTED_EDGE('',*,*,#117666,.T.); +#117666 = EDGE_CURVE('',#117659,#117667,#117669,.T.); +#117667 = VERTEX_POINT('',#117668); +#117668 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#117669 = LINE('',#117670,#117671); +#117670 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#117671 = VECTOR('',#117672,1.); +#117672 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117673 = ORIENTED_EDGE('',*,*,#117674,.T.); +#117674 = EDGE_CURVE('',#117667,#117642,#117675,.T.); +#117675 = LINE('',#117676,#117677); +#117676 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#117677 = VECTOR('',#117678,1.); +#117678 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117679 = PLANE('',#117680); +#117680 = AXIS2_PLACEMENT_3D('',#117681,#117682,#117683); +#117681 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#117682 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117683 = DIRECTION('',(0.,0.,1.)); +#117684 = ADVANCED_FACE('',(#117685),#117696,.T.); +#117685 = FACE_BOUND('',#117686,.T.); +#117686 = EDGE_LOOP('',(#117687,#117693,#117694,#117695)); +#117687 = ORIENTED_EDGE('',*,*,#117688,.F.); +#117688 = EDGE_CURVE('',#115807,#115831,#117689,.T.); +#117689 = LINE('',#117690,#117691); +#117690 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#117691 = VECTOR('',#117692,1.); +#117692 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117693 = ORIENTED_EDGE('',*,*,#115814,.T.); +#117694 = ORIENTED_EDGE('',*,*,#115822,.T.); +#117695 = ORIENTED_EDGE('',*,*,#115830,.T.); +#117696 = PLANE('',#117697); +#117697 = AXIS2_PLACEMENT_3D('',#117698,#117699,#117700); +#117698 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#117699 = DIRECTION('',(0.,-0.,-1.)); +#117700 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117701 = ADVANCED_FACE('',(#117702),#117743,.T.); +#117702 = FACE_BOUND('',#117703,.T.); +#117703 = EDGE_LOOP('',(#117704,#117712,#117713,#117721,#117729,#117737) + ); +#117704 = ORIENTED_EDGE('',*,*,#117705,.T.); +#117705 = EDGE_CURVE('',#117706,#115799,#117708,.T.); +#117706 = VERTEX_POINT('',#117707); +#117707 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#117708 = LINE('',#117709,#117710); +#117709 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#117710 = VECTOR('',#117711,1.); +#117711 = DIRECTION('',(0.,0.,1.)); +#117712 = ORIENTED_EDGE('',*,*,#115806,.F.); +#117713 = ORIENTED_EDGE('',*,*,#117714,.T.); +#117714 = EDGE_CURVE('',#115807,#117715,#117717,.T.); +#117715 = VERTEX_POINT('',#117716); +#117716 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#117717 = LINE('',#117718,#117719); +#117718 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#117719 = VECTOR('',#117720,1.); +#117720 = DIRECTION('',(0.,0.,-1.)); +#117721 = ORIENTED_EDGE('',*,*,#117722,.T.); +#117722 = EDGE_CURVE('',#117715,#117723,#117725,.T.); +#117723 = VERTEX_POINT('',#117724); +#117724 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#117725 = LINE('',#117726,#117727); +#117726 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#117727 = VECTOR('',#117728,1.); +#117728 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117729 = ORIENTED_EDGE('',*,*,#117730,.F.); +#117730 = EDGE_CURVE('',#117731,#117723,#117733,.T.); +#117731 = VERTEX_POINT('',#117732); +#117732 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#117733 = LINE('',#117734,#117735); +#117734 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#117735 = VECTOR('',#117736,1.); +#117736 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117737 = ORIENTED_EDGE('',*,*,#117738,.T.); +#117738 = EDGE_CURVE('',#117731,#117706,#117739,.T.); +#117739 = LINE('',#117740,#117741); +#117740 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#117741 = VECTOR('',#117742,1.); +#117742 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117743 = PLANE('',#117744); +#117744 = AXIS2_PLACEMENT_3D('',#117745,#117746,#117747); +#117745 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#117746 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117747 = DIRECTION('',(0.,0.,1.)); +#117748 = ADVANCED_FACE('',(#117749),#117760,.T.); +#117749 = FACE_BOUND('',#117750,.T.); +#117750 = EDGE_LOOP('',(#117751,#117752,#117753,#117759)); +#117751 = ORIENTED_EDGE('',*,*,#115854,.F.); +#117752 = ORIENTED_EDGE('',*,*,#115864,.T.); +#117753 = ORIENTED_EDGE('',*,*,#117754,.T.); +#117754 = EDGE_CURVE('',#115865,#115905,#117755,.T.); +#117755 = LINE('',#117756,#117757); +#117756 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#117757 = VECTOR('',#117758,1.); +#117758 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117759 = ORIENTED_EDGE('',*,*,#115912,.T.); +#117760 = PLANE('',#117761); +#117761 = AXIS2_PLACEMENT_3D('',#117762,#117763,#117764); +#117762 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#117763 = DIRECTION('',(0.,-0.,-1.)); +#117764 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117765 = ADVANCED_FACE('',(#117766),#117807,.F.); +#117766 = FACE_BOUND('',#117767,.F.); +#117767 = EDGE_LOOP('',(#117768,#117776,#117777,#117785,#117793,#117801) + ); +#117768 = ORIENTED_EDGE('',*,*,#117769,.T.); +#117769 = EDGE_CURVE('',#117770,#115905,#117772,.T.); +#117770 = VERTEX_POINT('',#117771); +#117771 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#117772 = LINE('',#117773,#117774); +#117773 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#117774 = VECTOR('',#117775,1.); +#117775 = DIRECTION('',(0.,0.,1.)); +#117776 = ORIENTED_EDGE('',*,*,#115904,.F.); +#117777 = ORIENTED_EDGE('',*,*,#117778,.T.); +#117778 = EDGE_CURVE('',#115897,#117779,#117781,.T.); +#117779 = VERTEX_POINT('',#117780); +#117780 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#117781 = LINE('',#117782,#117783); +#117782 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#117783 = VECTOR('',#117784,1.); +#117784 = DIRECTION('',(0.,0.,-1.)); +#117785 = ORIENTED_EDGE('',*,*,#117786,.T.); +#117786 = EDGE_CURVE('',#117779,#117787,#117789,.T.); +#117787 = VERTEX_POINT('',#117788); +#117788 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#117789 = LINE('',#117790,#117791); +#117790 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#117791 = VECTOR('',#117792,1.); +#117792 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117793 = ORIENTED_EDGE('',*,*,#117794,.T.); +#117794 = EDGE_CURVE('',#117787,#117795,#117797,.T.); +#117795 = VERTEX_POINT('',#117796); +#117796 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#117797 = LINE('',#117798,#117799); +#117798 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#117799 = VECTOR('',#117800,1.); +#117800 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117801 = ORIENTED_EDGE('',*,*,#117802,.T.); +#117802 = EDGE_CURVE('',#117795,#117770,#117803,.T.); +#117803 = LINE('',#117804,#117805); +#117804 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#117805 = VECTOR('',#117806,1.); +#117806 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117807 = PLANE('',#117808); +#117808 = AXIS2_PLACEMENT_3D('',#117809,#117810,#117811); +#117809 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#117810 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117811 = DIRECTION('',(0.,0.,1.)); +#117812 = ADVANCED_FACE('',(#117813),#117824,.T.); +#117813 = FACE_BOUND('',#117814,.T.); +#117814 = EDGE_LOOP('',(#117815,#117821,#117822,#117823)); +#117815 = ORIENTED_EDGE('',*,*,#117816,.F.); +#117816 = EDGE_CURVE('',#115873,#115897,#117817,.T.); +#117817 = LINE('',#117818,#117819); +#117818 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#117819 = VECTOR('',#117820,1.); +#117820 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117821 = ORIENTED_EDGE('',*,*,#115880,.T.); +#117822 = ORIENTED_EDGE('',*,*,#115888,.T.); +#117823 = ORIENTED_EDGE('',*,*,#115896,.T.); +#117824 = PLANE('',#117825); +#117825 = AXIS2_PLACEMENT_3D('',#117826,#117827,#117828); +#117826 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#117827 = DIRECTION('',(0.,-0.,-1.)); +#117828 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117829 = ADVANCED_FACE('',(#117830),#117871,.T.); +#117830 = FACE_BOUND('',#117831,.T.); +#117831 = EDGE_LOOP('',(#117832,#117840,#117841,#117849,#117857,#117865) + ); +#117832 = ORIENTED_EDGE('',*,*,#117833,.T.); +#117833 = EDGE_CURVE('',#117834,#115865,#117836,.T.); +#117834 = VERTEX_POINT('',#117835); +#117835 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#117836 = LINE('',#117837,#117838); +#117837 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#117838 = VECTOR('',#117839,1.); +#117839 = DIRECTION('',(0.,0.,1.)); +#117840 = ORIENTED_EDGE('',*,*,#115872,.F.); +#117841 = ORIENTED_EDGE('',*,*,#117842,.T.); +#117842 = EDGE_CURVE('',#115873,#117843,#117845,.T.); +#117843 = VERTEX_POINT('',#117844); +#117844 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#117845 = LINE('',#117846,#117847); +#117846 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#117847 = VECTOR('',#117848,1.); +#117848 = DIRECTION('',(0.,0.,-1.)); +#117849 = ORIENTED_EDGE('',*,*,#117850,.T.); +#117850 = EDGE_CURVE('',#117843,#117851,#117853,.T.); +#117851 = VERTEX_POINT('',#117852); +#117852 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#117853 = LINE('',#117854,#117855); +#117854 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#117855 = VECTOR('',#117856,1.); +#117856 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117857 = ORIENTED_EDGE('',*,*,#117858,.F.); +#117858 = EDGE_CURVE('',#117859,#117851,#117861,.T.); +#117859 = VERTEX_POINT('',#117860); +#117860 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#117861 = LINE('',#117862,#117863); +#117862 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#117863 = VECTOR('',#117864,1.); +#117864 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117865 = ORIENTED_EDGE('',*,*,#117866,.T.); +#117866 = EDGE_CURVE('',#117859,#117834,#117867,.T.); +#117867 = LINE('',#117868,#117869); +#117868 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#117869 = VECTOR('',#117870,1.); +#117870 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117871 = PLANE('',#117872); +#117872 = AXIS2_PLACEMENT_3D('',#117873,#117874,#117875); +#117873 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#117874 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117875 = DIRECTION('',(0.,0.,1.)); +#117876 = ADVANCED_FACE('',(#117877),#117888,.T.); +#117877 = FACE_BOUND('',#117878,.T.); +#117878 = EDGE_LOOP('',(#117879,#117880,#117881,#117887)); +#117879 = ORIENTED_EDGE('',*,*,#115920,.F.); +#117880 = ORIENTED_EDGE('',*,*,#115930,.T.); +#117881 = ORIENTED_EDGE('',*,*,#117882,.T.); +#117882 = EDGE_CURVE('',#115931,#115971,#117883,.T.); +#117883 = LINE('',#117884,#117885); +#117884 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#117885 = VECTOR('',#117886,1.); +#117886 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117887 = ORIENTED_EDGE('',*,*,#115978,.T.); +#117888 = PLANE('',#117889); +#117889 = AXIS2_PLACEMENT_3D('',#117890,#117891,#117892); +#117890 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#117891 = DIRECTION('',(0.,-0.,-1.)); +#117892 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117893 = ADVANCED_FACE('',(#117894),#117935,.F.); +#117894 = FACE_BOUND('',#117895,.F.); +#117895 = EDGE_LOOP('',(#117896,#117904,#117905,#117913,#117921,#117929) + ); +#117896 = ORIENTED_EDGE('',*,*,#117897,.T.); +#117897 = EDGE_CURVE('',#117898,#115971,#117900,.T.); +#117898 = VERTEX_POINT('',#117899); +#117899 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#117900 = LINE('',#117901,#117902); +#117901 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#117902 = VECTOR('',#117903,1.); +#117903 = DIRECTION('',(0.,0.,1.)); +#117904 = ORIENTED_EDGE('',*,*,#115970,.F.); +#117905 = ORIENTED_EDGE('',*,*,#117906,.T.); +#117906 = EDGE_CURVE('',#115963,#117907,#117909,.T.); +#117907 = VERTEX_POINT('',#117908); +#117908 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#117909 = LINE('',#117910,#117911); +#117910 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#117911 = VECTOR('',#117912,1.); +#117912 = DIRECTION('',(0.,0.,-1.)); +#117913 = ORIENTED_EDGE('',*,*,#117914,.T.); +#117914 = EDGE_CURVE('',#117907,#117915,#117917,.T.); +#117915 = VERTEX_POINT('',#117916); +#117916 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#117917 = LINE('',#117918,#117919); +#117918 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#117919 = VECTOR('',#117920,1.); +#117920 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117921 = ORIENTED_EDGE('',*,*,#117922,.T.); +#117922 = EDGE_CURVE('',#117915,#117923,#117925,.T.); +#117923 = VERTEX_POINT('',#117924); +#117924 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#117925 = LINE('',#117926,#117927); +#117926 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#117927 = VECTOR('',#117928,1.); +#117928 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117929 = ORIENTED_EDGE('',*,*,#117930,.T.); +#117930 = EDGE_CURVE('',#117923,#117898,#117931,.T.); +#117931 = LINE('',#117932,#117933); +#117932 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#117933 = VECTOR('',#117934,1.); +#117934 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117935 = PLANE('',#117936); +#117936 = AXIS2_PLACEMENT_3D('',#117937,#117938,#117939); +#117937 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#117938 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117939 = DIRECTION('',(0.,0.,1.)); +#117940 = ADVANCED_FACE('',(#117941),#117952,.T.); +#117941 = FACE_BOUND('',#117942,.T.); +#117942 = EDGE_LOOP('',(#117943,#117949,#117950,#117951)); +#117943 = ORIENTED_EDGE('',*,*,#117944,.F.); +#117944 = EDGE_CURVE('',#115939,#115963,#117945,.T.); +#117945 = LINE('',#117946,#117947); +#117946 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#117947 = VECTOR('',#117948,1.); +#117948 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117949 = ORIENTED_EDGE('',*,*,#115946,.T.); +#117950 = ORIENTED_EDGE('',*,*,#115954,.T.); +#117951 = ORIENTED_EDGE('',*,*,#115962,.T.); +#117952 = PLANE('',#117953); +#117953 = AXIS2_PLACEMENT_3D('',#117954,#117955,#117956); +#117954 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#117955 = DIRECTION('',(0.,-0.,-1.)); +#117956 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117957 = ADVANCED_FACE('',(#117958),#117999,.T.); +#117958 = FACE_BOUND('',#117959,.T.); +#117959 = EDGE_LOOP('',(#117960,#117968,#117969,#117977,#117985,#117993) + ); +#117960 = ORIENTED_EDGE('',*,*,#117961,.T.); +#117961 = EDGE_CURVE('',#117962,#115931,#117964,.T.); +#117962 = VERTEX_POINT('',#117963); +#117963 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#117964 = LINE('',#117965,#117966); +#117965 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#117966 = VECTOR('',#117967,1.); +#117967 = DIRECTION('',(0.,0.,1.)); +#117968 = ORIENTED_EDGE('',*,*,#115938,.F.); +#117969 = ORIENTED_EDGE('',*,*,#117970,.T.); +#117970 = EDGE_CURVE('',#115939,#117971,#117973,.T.); +#117971 = VERTEX_POINT('',#117972); +#117972 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#117973 = LINE('',#117974,#117975); +#117974 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#117975 = VECTOR('',#117976,1.); +#117976 = DIRECTION('',(0.,0.,-1.)); +#117977 = ORIENTED_EDGE('',*,*,#117978,.T.); +#117978 = EDGE_CURVE('',#117971,#117979,#117981,.T.); +#117979 = VERTEX_POINT('',#117980); +#117980 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#117981 = LINE('',#117982,#117983); +#117982 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#117983 = VECTOR('',#117984,1.); +#117984 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117985 = ORIENTED_EDGE('',*,*,#117986,.F.); +#117986 = EDGE_CURVE('',#117987,#117979,#117989,.T.); +#117987 = VERTEX_POINT('',#117988); +#117988 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#117989 = LINE('',#117990,#117991); +#117990 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#117991 = VECTOR('',#117992,1.); +#117992 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117993 = ORIENTED_EDGE('',*,*,#117994,.T.); +#117994 = EDGE_CURVE('',#117987,#117962,#117995,.T.); +#117995 = LINE('',#117996,#117997); +#117996 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#117997 = VECTOR('',#117998,1.); +#117998 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117999 = PLANE('',#118000); +#118000 = AXIS2_PLACEMENT_3D('',#118001,#118002,#118003); +#118001 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#118002 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118003 = DIRECTION('',(0.,0.,1.)); +#118004 = ADVANCED_FACE('',(#118005),#118016,.T.); +#118005 = FACE_BOUND('',#118006,.T.); +#118006 = EDGE_LOOP('',(#118007,#118008,#118009,#118015)); +#118007 = ORIENTED_EDGE('',*,*,#115986,.F.); +#118008 = ORIENTED_EDGE('',*,*,#115996,.T.); +#118009 = ORIENTED_EDGE('',*,*,#118010,.T.); +#118010 = EDGE_CURVE('',#115997,#116037,#118011,.T.); +#118011 = LINE('',#118012,#118013); +#118012 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#118013 = VECTOR('',#118014,1.); +#118014 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118015 = ORIENTED_EDGE('',*,*,#116044,.T.); +#118016 = PLANE('',#118017); +#118017 = AXIS2_PLACEMENT_3D('',#118018,#118019,#118020); +#118018 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#118019 = DIRECTION('',(0.,-0.,-1.)); +#118020 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118021 = ADVANCED_FACE('',(#118022),#118063,.F.); +#118022 = FACE_BOUND('',#118023,.F.); +#118023 = EDGE_LOOP('',(#118024,#118032,#118033,#118041,#118049,#118057) + ); +#118024 = ORIENTED_EDGE('',*,*,#118025,.T.); +#118025 = EDGE_CURVE('',#118026,#116037,#118028,.T.); +#118026 = VERTEX_POINT('',#118027); +#118027 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#118028 = LINE('',#118029,#118030); +#118029 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#118030 = VECTOR('',#118031,1.); +#118031 = DIRECTION('',(0.,0.,1.)); +#118032 = ORIENTED_EDGE('',*,*,#116036,.F.); +#118033 = ORIENTED_EDGE('',*,*,#118034,.T.); +#118034 = EDGE_CURVE('',#116029,#118035,#118037,.T.); +#118035 = VERTEX_POINT('',#118036); +#118036 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#118037 = LINE('',#118038,#118039); +#118038 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#118039 = VECTOR('',#118040,1.); +#118040 = DIRECTION('',(0.,0.,-1.)); +#118041 = ORIENTED_EDGE('',*,*,#118042,.T.); +#118042 = EDGE_CURVE('',#118035,#118043,#118045,.T.); +#118043 = VERTEX_POINT('',#118044); +#118044 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#118045 = LINE('',#118046,#118047); +#118046 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#118047 = VECTOR('',#118048,1.); +#118048 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118049 = ORIENTED_EDGE('',*,*,#118050,.T.); +#118050 = EDGE_CURVE('',#118043,#118051,#118053,.T.); +#118051 = VERTEX_POINT('',#118052); +#118052 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#118053 = LINE('',#118054,#118055); +#118054 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#118055 = VECTOR('',#118056,1.); +#118056 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118057 = ORIENTED_EDGE('',*,*,#118058,.T.); +#118058 = EDGE_CURVE('',#118051,#118026,#118059,.T.); +#118059 = LINE('',#118060,#118061); +#118060 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#118061 = VECTOR('',#118062,1.); +#118062 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118063 = PLANE('',#118064); +#118064 = AXIS2_PLACEMENT_3D('',#118065,#118066,#118067); +#118065 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#118066 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118067 = DIRECTION('',(0.,0.,1.)); +#118068 = ADVANCED_FACE('',(#118069),#118080,.T.); +#118069 = FACE_BOUND('',#118070,.T.); +#118070 = EDGE_LOOP('',(#118071,#118077,#118078,#118079)); +#118071 = ORIENTED_EDGE('',*,*,#118072,.F.); +#118072 = EDGE_CURVE('',#116005,#116029,#118073,.T.); +#118073 = LINE('',#118074,#118075); +#118074 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#118075 = VECTOR('',#118076,1.); +#118076 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118077 = ORIENTED_EDGE('',*,*,#116012,.T.); +#118078 = ORIENTED_EDGE('',*,*,#116020,.T.); +#118079 = ORIENTED_EDGE('',*,*,#116028,.T.); +#118080 = PLANE('',#118081); +#118081 = AXIS2_PLACEMENT_3D('',#118082,#118083,#118084); +#118082 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#118083 = DIRECTION('',(0.,-0.,-1.)); +#118084 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118085 = ADVANCED_FACE('',(#118086),#118127,.T.); +#118086 = FACE_BOUND('',#118087,.T.); +#118087 = EDGE_LOOP('',(#118088,#118096,#118097,#118105,#118113,#118121) + ); +#118088 = ORIENTED_EDGE('',*,*,#118089,.T.); +#118089 = EDGE_CURVE('',#118090,#115997,#118092,.T.); +#118090 = VERTEX_POINT('',#118091); +#118091 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#118092 = LINE('',#118093,#118094); +#118093 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#118094 = VECTOR('',#118095,1.); +#118095 = DIRECTION('',(0.,0.,1.)); +#118096 = ORIENTED_EDGE('',*,*,#116004,.F.); +#118097 = ORIENTED_EDGE('',*,*,#118098,.T.); +#118098 = EDGE_CURVE('',#116005,#118099,#118101,.T.); +#118099 = VERTEX_POINT('',#118100); +#118100 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#118101 = LINE('',#118102,#118103); +#118102 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#118103 = VECTOR('',#118104,1.); +#118104 = DIRECTION('',(0.,0.,-1.)); +#118105 = ORIENTED_EDGE('',*,*,#118106,.T.); +#118106 = EDGE_CURVE('',#118099,#118107,#118109,.T.); +#118107 = VERTEX_POINT('',#118108); +#118108 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#118109 = LINE('',#118110,#118111); +#118110 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#118111 = VECTOR('',#118112,1.); +#118112 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118113 = ORIENTED_EDGE('',*,*,#118114,.F.); +#118114 = EDGE_CURVE('',#118115,#118107,#118117,.T.); +#118115 = VERTEX_POINT('',#118116); +#118116 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#118117 = LINE('',#118118,#118119); +#118118 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#118119 = VECTOR('',#118120,1.); +#118120 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118121 = ORIENTED_EDGE('',*,*,#118122,.T.); +#118122 = EDGE_CURVE('',#118115,#118090,#118123,.T.); +#118123 = LINE('',#118124,#118125); +#118124 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#118125 = VECTOR('',#118126,1.); +#118126 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118127 = PLANE('',#118128); +#118128 = AXIS2_PLACEMENT_3D('',#118129,#118130,#118131); +#118129 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#118130 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118131 = DIRECTION('',(0.,0.,1.)); +#118132 = ADVANCED_FACE('',(#118133),#118144,.T.); +#118133 = FACE_BOUND('',#118134,.T.); +#118134 = EDGE_LOOP('',(#118135,#118136,#118137,#118143)); +#118135 = ORIENTED_EDGE('',*,*,#116052,.F.); +#118136 = ORIENTED_EDGE('',*,*,#116062,.T.); +#118137 = ORIENTED_EDGE('',*,*,#118138,.T.); +#118138 = EDGE_CURVE('',#116063,#116103,#118139,.T.); +#118139 = LINE('',#118140,#118141); +#118140 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#118141 = VECTOR('',#118142,1.); +#118142 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118143 = ORIENTED_EDGE('',*,*,#116110,.T.); +#118144 = PLANE('',#118145); +#118145 = AXIS2_PLACEMENT_3D('',#118146,#118147,#118148); +#118146 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#118147 = DIRECTION('',(0.,-0.,-1.)); +#118148 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118149 = ADVANCED_FACE('',(#118150),#118191,.F.); +#118150 = FACE_BOUND('',#118151,.F.); +#118151 = EDGE_LOOP('',(#118152,#118160,#118161,#118169,#118177,#118185) + ); +#118152 = ORIENTED_EDGE('',*,*,#118153,.T.); +#118153 = EDGE_CURVE('',#118154,#116103,#118156,.T.); +#118154 = VERTEX_POINT('',#118155); +#118155 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#118156 = LINE('',#118157,#118158); +#118157 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#118158 = VECTOR('',#118159,1.); +#118159 = DIRECTION('',(0.,0.,1.)); +#118160 = ORIENTED_EDGE('',*,*,#116102,.F.); +#118161 = ORIENTED_EDGE('',*,*,#118162,.T.); +#118162 = EDGE_CURVE('',#116095,#118163,#118165,.T.); +#118163 = VERTEX_POINT('',#118164); +#118164 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#118165 = LINE('',#118166,#118167); +#118166 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#118167 = VECTOR('',#118168,1.); +#118168 = DIRECTION('',(0.,0.,-1.)); +#118169 = ORIENTED_EDGE('',*,*,#118170,.T.); +#118170 = EDGE_CURVE('',#118163,#118171,#118173,.T.); +#118171 = VERTEX_POINT('',#118172); +#118172 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#118173 = LINE('',#118174,#118175); +#118174 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#118175 = VECTOR('',#118176,1.); +#118176 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118177 = ORIENTED_EDGE('',*,*,#118178,.T.); +#118178 = EDGE_CURVE('',#118171,#118179,#118181,.T.); +#118179 = VERTEX_POINT('',#118180); +#118180 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#118181 = LINE('',#118182,#118183); +#118182 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#118183 = VECTOR('',#118184,1.); +#118184 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118185 = ORIENTED_EDGE('',*,*,#118186,.T.); +#118186 = EDGE_CURVE('',#118179,#118154,#118187,.T.); +#118187 = LINE('',#118188,#118189); +#118188 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#118189 = VECTOR('',#118190,1.); +#118190 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118191 = PLANE('',#118192); +#118192 = AXIS2_PLACEMENT_3D('',#118193,#118194,#118195); +#118193 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#118194 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118195 = DIRECTION('',(0.,0.,1.)); +#118196 = ADVANCED_FACE('',(#118197),#118208,.T.); +#118197 = FACE_BOUND('',#118198,.T.); +#118198 = EDGE_LOOP('',(#118199,#118205,#118206,#118207)); +#118199 = ORIENTED_EDGE('',*,*,#118200,.F.); +#118200 = EDGE_CURVE('',#116071,#116095,#118201,.T.); +#118201 = LINE('',#118202,#118203); +#118202 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#118203 = VECTOR('',#118204,1.); +#118204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118205 = ORIENTED_EDGE('',*,*,#116078,.T.); +#118206 = ORIENTED_EDGE('',*,*,#116086,.T.); +#118207 = ORIENTED_EDGE('',*,*,#116094,.T.); +#118208 = PLANE('',#118209); +#118209 = AXIS2_PLACEMENT_3D('',#118210,#118211,#118212); +#118210 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#118211 = DIRECTION('',(0.,-0.,-1.)); +#118212 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118213 = ADVANCED_FACE('',(#118214),#118255,.T.); +#118214 = FACE_BOUND('',#118215,.T.); +#118215 = EDGE_LOOP('',(#118216,#118224,#118225,#118233,#118241,#118249) + ); +#118216 = ORIENTED_EDGE('',*,*,#118217,.T.); +#118217 = EDGE_CURVE('',#118218,#116063,#118220,.T.); +#118218 = VERTEX_POINT('',#118219); +#118219 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#118220 = LINE('',#118221,#118222); +#118221 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#118222 = VECTOR('',#118223,1.); +#118223 = DIRECTION('',(0.,0.,1.)); +#118224 = ORIENTED_EDGE('',*,*,#116070,.F.); +#118225 = ORIENTED_EDGE('',*,*,#118226,.T.); +#118226 = EDGE_CURVE('',#116071,#118227,#118229,.T.); +#118227 = VERTEX_POINT('',#118228); +#118228 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#118229 = LINE('',#118230,#118231); +#118230 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#118231 = VECTOR('',#118232,1.); +#118232 = DIRECTION('',(0.,0.,-1.)); +#118233 = ORIENTED_EDGE('',*,*,#118234,.T.); +#118234 = EDGE_CURVE('',#118227,#118235,#118237,.T.); +#118235 = VERTEX_POINT('',#118236); +#118236 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#118237 = LINE('',#118238,#118239); +#118238 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#118239 = VECTOR('',#118240,1.); +#118240 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118241 = ORIENTED_EDGE('',*,*,#118242,.F.); +#118242 = EDGE_CURVE('',#118243,#118235,#118245,.T.); +#118243 = VERTEX_POINT('',#118244); +#118244 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#118245 = LINE('',#118246,#118247); +#118246 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#118247 = VECTOR('',#118248,1.); +#118248 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118249 = ORIENTED_EDGE('',*,*,#118250,.T.); +#118250 = EDGE_CURVE('',#118243,#118218,#118251,.T.); +#118251 = LINE('',#118252,#118253); +#118252 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#118253 = VECTOR('',#118254,1.); +#118254 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118255 = PLANE('',#118256); +#118256 = AXIS2_PLACEMENT_3D('',#118257,#118258,#118259); +#118257 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#118258 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118259 = DIRECTION('',(0.,0.,1.)); +#118260 = ADVANCED_FACE('',(#118261),#118272,.T.); +#118261 = FACE_BOUND('',#118262,.T.); +#118262 = EDGE_LOOP('',(#118263,#118264,#118265,#118271)); +#118263 = ORIENTED_EDGE('',*,*,#116118,.F.); +#118264 = ORIENTED_EDGE('',*,*,#116128,.T.); +#118265 = ORIENTED_EDGE('',*,*,#118266,.T.); +#118266 = EDGE_CURVE('',#116129,#116169,#118267,.T.); +#118267 = LINE('',#118268,#118269); +#118268 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#118269 = VECTOR('',#118270,1.); +#118270 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118271 = ORIENTED_EDGE('',*,*,#116176,.T.); +#118272 = PLANE('',#118273); +#118273 = AXIS2_PLACEMENT_3D('',#118274,#118275,#118276); +#118274 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#118275 = DIRECTION('',(0.,-0.,-1.)); +#118276 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118277 = ADVANCED_FACE('',(#118278),#118319,.F.); +#118278 = FACE_BOUND('',#118279,.F.); +#118279 = EDGE_LOOP('',(#118280,#118288,#118289,#118297,#118305,#118313) + ); +#118280 = ORIENTED_EDGE('',*,*,#118281,.T.); +#118281 = EDGE_CURVE('',#118282,#116169,#118284,.T.); +#118282 = VERTEX_POINT('',#118283); +#118283 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#118284 = LINE('',#118285,#118286); +#118285 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#118286 = VECTOR('',#118287,1.); +#118287 = DIRECTION('',(0.,0.,1.)); +#118288 = ORIENTED_EDGE('',*,*,#116168,.F.); +#118289 = ORIENTED_EDGE('',*,*,#118290,.T.); +#118290 = EDGE_CURVE('',#116161,#118291,#118293,.T.); +#118291 = VERTEX_POINT('',#118292); +#118292 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#118293 = LINE('',#118294,#118295); +#118294 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#118295 = VECTOR('',#118296,1.); +#118296 = DIRECTION('',(0.,0.,-1.)); +#118297 = ORIENTED_EDGE('',*,*,#118298,.T.); +#118298 = EDGE_CURVE('',#118291,#118299,#118301,.T.); +#118299 = VERTEX_POINT('',#118300); +#118300 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#118301 = LINE('',#118302,#118303); +#118302 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#118303 = VECTOR('',#118304,1.); +#118304 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118305 = ORIENTED_EDGE('',*,*,#118306,.T.); +#118306 = EDGE_CURVE('',#118299,#118307,#118309,.T.); +#118307 = VERTEX_POINT('',#118308); +#118308 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#118309 = LINE('',#118310,#118311); +#118310 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#118311 = VECTOR('',#118312,1.); +#118312 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118313 = ORIENTED_EDGE('',*,*,#118314,.T.); +#118314 = EDGE_CURVE('',#118307,#118282,#118315,.T.); +#118315 = LINE('',#118316,#118317); +#118316 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#118317 = VECTOR('',#118318,1.); +#118318 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118319 = PLANE('',#118320); +#118320 = AXIS2_PLACEMENT_3D('',#118321,#118322,#118323); +#118321 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#118322 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118323 = DIRECTION('',(0.,0.,1.)); +#118324 = ADVANCED_FACE('',(#118325),#118336,.T.); +#118325 = FACE_BOUND('',#118326,.T.); +#118326 = EDGE_LOOP('',(#118327,#118333,#118334,#118335)); +#118327 = ORIENTED_EDGE('',*,*,#118328,.F.); +#118328 = EDGE_CURVE('',#116137,#116161,#118329,.T.); +#118329 = LINE('',#118330,#118331); +#118330 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#118331 = VECTOR('',#118332,1.); +#118332 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118333 = ORIENTED_EDGE('',*,*,#116144,.T.); +#118334 = ORIENTED_EDGE('',*,*,#116152,.T.); +#118335 = ORIENTED_EDGE('',*,*,#116160,.T.); +#118336 = PLANE('',#118337); +#118337 = AXIS2_PLACEMENT_3D('',#118338,#118339,#118340); +#118338 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#118339 = DIRECTION('',(0.,-0.,-1.)); +#118340 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118341 = ADVANCED_FACE('',(#118342),#118383,.T.); +#118342 = FACE_BOUND('',#118343,.T.); +#118343 = EDGE_LOOP('',(#118344,#118352,#118353,#118361,#118369,#118377) + ); +#118344 = ORIENTED_EDGE('',*,*,#118345,.T.); +#118345 = EDGE_CURVE('',#118346,#116129,#118348,.T.); +#118346 = VERTEX_POINT('',#118347); +#118347 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#118348 = LINE('',#118349,#118350); +#118349 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#118350 = VECTOR('',#118351,1.); +#118351 = DIRECTION('',(0.,0.,1.)); +#118352 = ORIENTED_EDGE('',*,*,#116136,.F.); +#118353 = ORIENTED_EDGE('',*,*,#118354,.T.); +#118354 = EDGE_CURVE('',#116137,#118355,#118357,.T.); +#118355 = VERTEX_POINT('',#118356); +#118356 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#118357 = LINE('',#118358,#118359); +#118358 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#118359 = VECTOR('',#118360,1.); +#118360 = DIRECTION('',(0.,0.,-1.)); +#118361 = ORIENTED_EDGE('',*,*,#118362,.T.); +#118362 = EDGE_CURVE('',#118355,#118363,#118365,.T.); +#118363 = VERTEX_POINT('',#118364); +#118364 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#118365 = LINE('',#118366,#118367); +#118366 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#118367 = VECTOR('',#118368,1.); +#118368 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118369 = ORIENTED_EDGE('',*,*,#118370,.F.); +#118370 = EDGE_CURVE('',#118371,#118363,#118373,.T.); +#118371 = VERTEX_POINT('',#118372); +#118372 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#118373 = LINE('',#118374,#118375); +#118374 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#118375 = VECTOR('',#118376,1.); +#118376 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118377 = ORIENTED_EDGE('',*,*,#118378,.T.); +#118378 = EDGE_CURVE('',#118371,#118346,#118379,.T.); +#118379 = LINE('',#118380,#118381); +#118380 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#118381 = VECTOR('',#118382,1.); +#118382 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118383 = PLANE('',#118384); +#118384 = AXIS2_PLACEMENT_3D('',#118385,#118386,#118387); +#118385 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#118386 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118387 = DIRECTION('',(0.,0.,1.)); +#118388 = ADVANCED_FACE('',(#118389),#118400,.T.); +#118389 = FACE_BOUND('',#118390,.T.); +#118390 = EDGE_LOOP('',(#118391,#118392,#118393,#118399)); +#118391 = ORIENTED_EDGE('',*,*,#116184,.F.); +#118392 = ORIENTED_EDGE('',*,*,#116194,.T.); +#118393 = ORIENTED_EDGE('',*,*,#118394,.T.); +#118394 = EDGE_CURVE('',#116195,#116235,#118395,.T.); +#118395 = LINE('',#118396,#118397); +#118396 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#118397 = VECTOR('',#118398,1.); +#118398 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118399 = ORIENTED_EDGE('',*,*,#116242,.T.); +#118400 = PLANE('',#118401); +#118401 = AXIS2_PLACEMENT_3D('',#118402,#118403,#118404); +#118402 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#118403 = DIRECTION('',(0.,-0.,-1.)); +#118404 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118405 = ADVANCED_FACE('',(#118406),#118447,.F.); +#118406 = FACE_BOUND('',#118407,.F.); +#118407 = EDGE_LOOP('',(#118408,#118416,#118417,#118425,#118433,#118441) + ); +#118408 = ORIENTED_EDGE('',*,*,#118409,.T.); +#118409 = EDGE_CURVE('',#118410,#116235,#118412,.T.); +#118410 = VERTEX_POINT('',#118411); +#118411 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#118412 = LINE('',#118413,#118414); +#118413 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#118414 = VECTOR('',#118415,1.); +#118415 = DIRECTION('',(0.,0.,1.)); +#118416 = ORIENTED_EDGE('',*,*,#116234,.F.); +#118417 = ORIENTED_EDGE('',*,*,#118418,.T.); +#118418 = EDGE_CURVE('',#116227,#118419,#118421,.T.); +#118419 = VERTEX_POINT('',#118420); +#118420 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#118421 = LINE('',#118422,#118423); +#118422 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#118423 = VECTOR('',#118424,1.); +#118424 = DIRECTION('',(0.,0.,-1.)); +#118425 = ORIENTED_EDGE('',*,*,#118426,.T.); +#118426 = EDGE_CURVE('',#118419,#118427,#118429,.T.); +#118427 = VERTEX_POINT('',#118428); +#118428 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#118429 = LINE('',#118430,#118431); +#118430 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#118431 = VECTOR('',#118432,1.); +#118432 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118433 = ORIENTED_EDGE('',*,*,#118434,.T.); +#118434 = EDGE_CURVE('',#118427,#118435,#118437,.T.); +#118435 = VERTEX_POINT('',#118436); +#118436 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#118437 = LINE('',#118438,#118439); +#118438 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#118439 = VECTOR('',#118440,1.); +#118440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118441 = ORIENTED_EDGE('',*,*,#118442,.T.); +#118442 = EDGE_CURVE('',#118435,#118410,#118443,.T.); +#118443 = LINE('',#118444,#118445); +#118444 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#118445 = VECTOR('',#118446,1.); +#118446 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118447 = PLANE('',#118448); +#118448 = AXIS2_PLACEMENT_3D('',#118449,#118450,#118451); +#118449 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#118450 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118451 = DIRECTION('',(0.,0.,1.)); +#118452 = ADVANCED_FACE('',(#118453),#118464,.T.); +#118453 = FACE_BOUND('',#118454,.T.); +#118454 = EDGE_LOOP('',(#118455,#118461,#118462,#118463)); +#118455 = ORIENTED_EDGE('',*,*,#118456,.F.); +#118456 = EDGE_CURVE('',#116203,#116227,#118457,.T.); +#118457 = LINE('',#118458,#118459); +#118458 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#118459 = VECTOR('',#118460,1.); +#118460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118461 = ORIENTED_EDGE('',*,*,#116210,.T.); +#118462 = ORIENTED_EDGE('',*,*,#116218,.T.); +#118463 = ORIENTED_EDGE('',*,*,#116226,.T.); +#118464 = PLANE('',#118465); +#118465 = AXIS2_PLACEMENT_3D('',#118466,#118467,#118468); +#118466 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#118467 = DIRECTION('',(0.,-0.,-1.)); +#118468 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118469 = ADVANCED_FACE('',(#118470),#118511,.T.); +#118470 = FACE_BOUND('',#118471,.T.); +#118471 = EDGE_LOOP('',(#118472,#118480,#118481,#118489,#118497,#118505) + ); +#118472 = ORIENTED_EDGE('',*,*,#118473,.T.); +#118473 = EDGE_CURVE('',#118474,#116195,#118476,.T.); +#118474 = VERTEX_POINT('',#118475); +#118475 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#118476 = LINE('',#118477,#118478); +#118477 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#118478 = VECTOR('',#118479,1.); +#118479 = DIRECTION('',(0.,0.,1.)); +#118480 = ORIENTED_EDGE('',*,*,#116202,.F.); +#118481 = ORIENTED_EDGE('',*,*,#118482,.T.); +#118482 = EDGE_CURVE('',#116203,#118483,#118485,.T.); +#118483 = VERTEX_POINT('',#118484); +#118484 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#118485 = LINE('',#118486,#118487); +#118486 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#118487 = VECTOR('',#118488,1.); +#118488 = DIRECTION('',(0.,0.,-1.)); +#118489 = ORIENTED_EDGE('',*,*,#118490,.T.); +#118490 = EDGE_CURVE('',#118483,#118491,#118493,.T.); +#118491 = VERTEX_POINT('',#118492); +#118492 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#118493 = LINE('',#118494,#118495); +#118494 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#118495 = VECTOR('',#118496,1.); +#118496 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118497 = ORIENTED_EDGE('',*,*,#118498,.F.); +#118498 = EDGE_CURVE('',#118499,#118491,#118501,.T.); +#118499 = VERTEX_POINT('',#118500); +#118500 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#118501 = LINE('',#118502,#118503); +#118502 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#118503 = VECTOR('',#118504,1.); +#118504 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118505 = ORIENTED_EDGE('',*,*,#118506,.T.); +#118506 = EDGE_CURVE('',#118499,#118474,#118507,.T.); +#118507 = LINE('',#118508,#118509); +#118508 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#118509 = VECTOR('',#118510,1.); +#118510 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118511 = PLANE('',#118512); +#118512 = AXIS2_PLACEMENT_3D('',#118513,#118514,#118515); +#118513 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#118514 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118515 = DIRECTION('',(0.,0.,1.)); +#118516 = ADVANCED_FACE('',(#118517),#118542,.F.); +#118517 = FACE_BOUND('',#118518,.F.); +#118518 = EDGE_LOOP('',(#118519,#118527,#118535,#118541)); +#118519 = ORIENTED_EDGE('',*,*,#118520,.T.); +#118520 = EDGE_CURVE('',#116281,#118521,#118523,.T.); +#118521 = VERTEX_POINT('',#118522); +#118522 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#118523 = LINE('',#118524,#118525); +#118524 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#118525 = VECTOR('',#118526,1.); +#118526 = DIRECTION('',(0.,-0.,-1.)); +#118527 = ORIENTED_EDGE('',*,*,#118528,.T.); +#118528 = EDGE_CURVE('',#118521,#118529,#118531,.T.); +#118529 = VERTEX_POINT('',#118530); +#118530 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#118531 = LINE('',#118532,#118533); +#118532 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#118533 = VECTOR('',#118534,1.); +#118534 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118535 = ORIENTED_EDGE('',*,*,#118536,.F.); +#118536 = EDGE_CURVE('',#116290,#118529,#118537,.T.); +#118537 = LINE('',#118538,#118539); +#118538 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#118539 = VECTOR('',#118540,1.); +#118540 = DIRECTION('',(0.,-0.,-1.)); +#118541 = ORIENTED_EDGE('',*,*,#116297,.F.); +#118542 = PLANE('',#118543); +#118543 = AXIS2_PLACEMENT_3D('',#118544,#118545,#118546); +#118544 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#118545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118546 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118547 = ADVANCED_FACE('',(#118548),#118598,.F.); +#118548 = FACE_BOUND('',#118549,.F.); +#118549 = EDGE_LOOP('',(#118550,#118551,#118552,#118560,#118568,#118576, + #118584,#118592)); +#118550 = ORIENTED_EDGE('',*,*,#116321,.F.); +#118551 = ORIENTED_EDGE('',*,*,#118536,.T.); +#118552 = ORIENTED_EDGE('',*,*,#118553,.T.); +#118553 = EDGE_CURVE('',#118529,#118554,#118556,.T.); +#118554 = VERTEX_POINT('',#118555); +#118555 = CARTESIAN_POINT('',(0.1,-22.56,0.9)); +#118556 = LINE('',#118557,#118558); +#118557 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#118558 = VECTOR('',#118559,1.); +#118559 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118560 = ORIENTED_EDGE('',*,*,#118561,.T.); +#118561 = EDGE_CURVE('',#118554,#118562,#118564,.T.); +#118562 = VERTEX_POINT('',#118563); +#118563 = CARTESIAN_POINT('',(0.1,-22.56,7.4)); +#118564 = LINE('',#118565,#118566); +#118565 = CARTESIAN_POINT('',(0.1,-22.56,6.055738799212)); +#118566 = VECTOR('',#118567,1.); +#118567 = DIRECTION('',(0.,-0.,1.)); +#118568 = ORIENTED_EDGE('',*,*,#118569,.F.); +#118569 = EDGE_CURVE('',#118570,#118562,#118572,.T.); +#118570 = VERTEX_POINT('',#118571); +#118571 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#118572 = LINE('',#118573,#118574); +#118573 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#118574 = VECTOR('',#118575,1.); +#118575 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118576 = ORIENTED_EDGE('',*,*,#118577,.F.); +#118577 = EDGE_CURVE('',#118578,#118570,#118580,.T.); +#118578 = VERTEX_POINT('',#118579); +#118579 = CARTESIAN_POINT('',(-0.1,-22.56,0.9)); +#118580 = LINE('',#118581,#118582); +#118581 = CARTESIAN_POINT('',(-0.1,-22.56,6.055738799212)); +#118582 = VECTOR('',#118583,1.); +#118583 = DIRECTION('',(0.,-0.,1.)); +#118584 = ORIENTED_EDGE('',*,*,#118585,.T.); +#118585 = EDGE_CURVE('',#118578,#118586,#118588,.T.); +#118586 = VERTEX_POINT('',#118587); +#118587 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#118588 = LINE('',#118589,#118590); +#118589 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#118590 = VECTOR('',#118591,1.); +#118591 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118592 = ORIENTED_EDGE('',*,*,#118593,.F.); +#118593 = EDGE_CURVE('',#116314,#118586,#118594,.T.); +#118594 = LINE('',#118595,#118596); +#118595 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#118596 = VECTOR('',#118597,1.); +#118597 = DIRECTION('',(0.,-0.,-1.)); +#118598 = PLANE('',#118599); +#118599 = AXIS2_PLACEMENT_3D('',#118600,#118601,#118602); +#118600 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#118601 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118602 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118603 = ADVANCED_FACE('',(#118604),#118622,.F.); +#118604 = FACE_BOUND('',#118605,.F.); +#118605 = EDGE_LOOP('',(#118606,#118607,#118615,#118621)); +#118606 = ORIENTED_EDGE('',*,*,#118593,.T.); +#118607 = ORIENTED_EDGE('',*,*,#118608,.T.); +#118608 = EDGE_CURVE('',#118586,#118609,#118611,.T.); +#118609 = VERTEX_POINT('',#118610); +#118610 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#118611 = LINE('',#118612,#118613); +#118612 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#118613 = VECTOR('',#118614,1.); +#118614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118615 = ORIENTED_EDGE('',*,*,#118616,.F.); +#118616 = EDGE_CURVE('',#116338,#118609,#118617,.T.); +#118617 = LINE('',#118618,#118619); +#118618 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#118619 = VECTOR('',#118620,1.); +#118620 = DIRECTION('',(0.,-0.,-1.)); +#118621 = ORIENTED_EDGE('',*,*,#116345,.F.); +#118622 = PLANE('',#118623); +#118623 = AXIS2_PLACEMENT_3D('',#118624,#118625,#118626); +#118624 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#118625 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118626 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118627 = ADVANCED_FACE('',(#118628),#118671,.F.); +#118628 = FACE_BOUND('',#118629,.F.); +#118629 = EDGE_LOOP('',(#118630,#118631,#118632,#118640,#118648,#118656, + #118664,#118670)); +#118630 = ORIENTED_EDGE('',*,*,#116362,.F.); +#118631 = ORIENTED_EDGE('',*,*,#118616,.T.); +#118632 = ORIENTED_EDGE('',*,*,#118633,.T.); +#118633 = EDGE_CURVE('',#118609,#118634,#118636,.T.); +#118634 = VERTEX_POINT('',#118635); +#118635 = CARTESIAN_POINT('',(-0.1,-23.16,0.9)); +#118636 = LINE('',#118637,#118638); +#118637 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#118638 = VECTOR('',#118639,1.); +#118639 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118640 = ORIENTED_EDGE('',*,*,#118641,.F.); +#118641 = EDGE_CURVE('',#118642,#118634,#118644,.T.); +#118642 = VERTEX_POINT('',#118643); +#118643 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#118644 = LINE('',#118645,#118646); +#118645 = CARTESIAN_POINT('',(-0.1,-23.16,6.055738799212)); +#118646 = VECTOR('',#118647,1.); +#118647 = DIRECTION('',(-0.,0.,-1.)); +#118648 = ORIENTED_EDGE('',*,*,#118649,.T.); +#118649 = EDGE_CURVE('',#118642,#118650,#118652,.T.); +#118650 = VERTEX_POINT('',#118651); +#118651 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#118652 = LINE('',#118653,#118654); +#118653 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#118654 = VECTOR('',#118655,1.); +#118655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118656 = ORIENTED_EDGE('',*,*,#118657,.T.); +#118657 = EDGE_CURVE('',#118650,#118658,#118660,.T.); +#118658 = VERTEX_POINT('',#118659); +#118659 = CARTESIAN_POINT('',(0.1,-23.16,0.9)); +#118660 = LINE('',#118661,#118662); +#118661 = CARTESIAN_POINT('',(0.1,-23.16,6.055738799212)); +#118662 = VECTOR('',#118663,1.); +#118663 = DIRECTION('',(-0.,0.,-1.)); +#118664 = ORIENTED_EDGE('',*,*,#118665,.T.); +#118665 = EDGE_CURVE('',#118658,#118521,#118666,.T.); +#118666 = LINE('',#118667,#118668); +#118667 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#118668 = VECTOR('',#118669,1.); +#118669 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118670 = ORIENTED_EDGE('',*,*,#118520,.F.); +#118671 = PLANE('',#118672); +#118672 = AXIS2_PLACEMENT_3D('',#118673,#118674,#118675); +#118673 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#118674 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118675 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118676 = ADVANCED_FACE('',(#118677),#118702,.F.); +#118677 = FACE_BOUND('',#118678,.F.); +#118678 = EDGE_LOOP('',(#118679,#118687,#118695,#118701)); +#118679 = ORIENTED_EDGE('',*,*,#118680,.T.); +#118680 = EDGE_CURVE('',#116377,#118681,#118683,.T.); +#118681 = VERTEX_POINT('',#118682); +#118682 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#118683 = LINE('',#118684,#118685); +#118684 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#118685 = VECTOR('',#118686,1.); +#118686 = DIRECTION('',(0.,-0.,-1.)); +#118687 = ORIENTED_EDGE('',*,*,#118688,.T.); +#118688 = EDGE_CURVE('',#118681,#118689,#118691,.T.); +#118689 = VERTEX_POINT('',#118690); +#118690 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#118691 = LINE('',#118692,#118693); +#118692 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#118693 = VECTOR('',#118694,1.); +#118694 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118695 = ORIENTED_EDGE('',*,*,#118696,.F.); +#118696 = EDGE_CURVE('',#116386,#118689,#118697,.T.); +#118697 = LINE('',#118698,#118699); +#118698 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#118699 = VECTOR('',#118700,1.); +#118700 = DIRECTION('',(0.,-0.,-1.)); +#118701 = ORIENTED_EDGE('',*,*,#116393,.F.); +#118702 = PLANE('',#118703); +#118703 = AXIS2_PLACEMENT_3D('',#118704,#118705,#118706); +#118704 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#118705 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118706 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118707 = ADVANCED_FACE('',(#118708),#118758,.F.); +#118708 = FACE_BOUND('',#118709,.F.); +#118709 = EDGE_LOOP('',(#118710,#118711,#118712,#118720,#118728,#118736, + #118744,#118752)); +#118710 = ORIENTED_EDGE('',*,*,#116417,.F.); +#118711 = ORIENTED_EDGE('',*,*,#118696,.T.); +#118712 = ORIENTED_EDGE('',*,*,#118713,.T.); +#118713 = EDGE_CURVE('',#118689,#118714,#118716,.T.); +#118714 = VERTEX_POINT('',#118715); +#118715 = CARTESIAN_POINT('',(0.1,-20.02,0.9)); +#118716 = LINE('',#118717,#118718); +#118717 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#118718 = VECTOR('',#118719,1.); +#118719 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118720 = ORIENTED_EDGE('',*,*,#118721,.T.); +#118721 = EDGE_CURVE('',#118714,#118722,#118724,.T.); +#118722 = VERTEX_POINT('',#118723); +#118723 = CARTESIAN_POINT('',(0.1,-20.02,7.4)); +#118724 = LINE('',#118725,#118726); +#118725 = CARTESIAN_POINT('',(0.1,-20.02,6.055738799212)); +#118726 = VECTOR('',#118727,1.); +#118727 = DIRECTION('',(0.,-0.,1.)); +#118728 = ORIENTED_EDGE('',*,*,#118729,.F.); +#118729 = EDGE_CURVE('',#118730,#118722,#118732,.T.); +#118730 = VERTEX_POINT('',#118731); +#118731 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#118732 = LINE('',#118733,#118734); +#118733 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#118734 = VECTOR('',#118735,1.); +#118735 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118736 = ORIENTED_EDGE('',*,*,#118737,.F.); +#118737 = EDGE_CURVE('',#118738,#118730,#118740,.T.); +#118738 = VERTEX_POINT('',#118739); +#118739 = CARTESIAN_POINT('',(-0.1,-20.02,0.9)); +#118740 = LINE('',#118741,#118742); +#118741 = CARTESIAN_POINT('',(-0.1,-20.02,6.055738799212)); +#118742 = VECTOR('',#118743,1.); +#118743 = DIRECTION('',(0.,-0.,1.)); +#118744 = ORIENTED_EDGE('',*,*,#118745,.T.); +#118745 = EDGE_CURVE('',#118738,#118746,#118748,.T.); +#118746 = VERTEX_POINT('',#118747); +#118747 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#118748 = LINE('',#118749,#118750); +#118749 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#118750 = VECTOR('',#118751,1.); +#118751 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118752 = ORIENTED_EDGE('',*,*,#118753,.F.); +#118753 = EDGE_CURVE('',#116410,#118746,#118754,.T.); +#118754 = LINE('',#118755,#118756); +#118755 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#118756 = VECTOR('',#118757,1.); +#118757 = DIRECTION('',(0.,-0.,-1.)); +#118758 = PLANE('',#118759); +#118759 = AXIS2_PLACEMENT_3D('',#118760,#118761,#118762); +#118760 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#118761 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118762 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118763 = ADVANCED_FACE('',(#118764),#118782,.F.); +#118764 = FACE_BOUND('',#118765,.F.); +#118765 = EDGE_LOOP('',(#118766,#118767,#118775,#118781)); +#118766 = ORIENTED_EDGE('',*,*,#118753,.T.); +#118767 = ORIENTED_EDGE('',*,*,#118768,.T.); +#118768 = EDGE_CURVE('',#118746,#118769,#118771,.T.); +#118769 = VERTEX_POINT('',#118770); +#118770 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#118771 = LINE('',#118772,#118773); +#118772 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#118773 = VECTOR('',#118774,1.); +#118774 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118775 = ORIENTED_EDGE('',*,*,#118776,.F.); +#118776 = EDGE_CURVE('',#116434,#118769,#118777,.T.); +#118777 = LINE('',#118778,#118779); +#118778 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#118779 = VECTOR('',#118780,1.); +#118780 = DIRECTION('',(0.,-0.,-1.)); +#118781 = ORIENTED_EDGE('',*,*,#116441,.F.); +#118782 = PLANE('',#118783); +#118783 = AXIS2_PLACEMENT_3D('',#118784,#118785,#118786); +#118784 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#118785 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118786 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118787 = ADVANCED_FACE('',(#118788),#118831,.F.); +#118788 = FACE_BOUND('',#118789,.F.); +#118789 = EDGE_LOOP('',(#118790,#118791,#118792,#118800,#118808,#118816, + #118824,#118830)); +#118790 = ORIENTED_EDGE('',*,*,#116458,.F.); +#118791 = ORIENTED_EDGE('',*,*,#118776,.T.); +#118792 = ORIENTED_EDGE('',*,*,#118793,.T.); +#118793 = EDGE_CURVE('',#118769,#118794,#118796,.T.); +#118794 = VERTEX_POINT('',#118795); +#118795 = CARTESIAN_POINT('',(-0.1,-20.62,0.9)); +#118796 = LINE('',#118797,#118798); +#118797 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#118798 = VECTOR('',#118799,1.); +#118799 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118800 = ORIENTED_EDGE('',*,*,#118801,.F.); +#118801 = EDGE_CURVE('',#118802,#118794,#118804,.T.); +#118802 = VERTEX_POINT('',#118803); +#118803 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#118804 = LINE('',#118805,#118806); +#118805 = CARTESIAN_POINT('',(-0.1,-20.62,6.055738799212)); +#118806 = VECTOR('',#118807,1.); +#118807 = DIRECTION('',(-0.,0.,-1.)); +#118808 = ORIENTED_EDGE('',*,*,#118809,.T.); +#118809 = EDGE_CURVE('',#118802,#118810,#118812,.T.); +#118810 = VERTEX_POINT('',#118811); +#118811 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#118812 = LINE('',#118813,#118814); +#118813 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#118814 = VECTOR('',#118815,1.); +#118815 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118816 = ORIENTED_EDGE('',*,*,#118817,.T.); +#118817 = EDGE_CURVE('',#118810,#118818,#118820,.T.); +#118818 = VERTEX_POINT('',#118819); +#118819 = CARTESIAN_POINT('',(0.1,-20.62,0.9)); +#118820 = LINE('',#118821,#118822); +#118821 = CARTESIAN_POINT('',(0.1,-20.62,6.055738799212)); +#118822 = VECTOR('',#118823,1.); +#118823 = DIRECTION('',(-0.,0.,-1.)); +#118824 = ORIENTED_EDGE('',*,*,#118825,.T.); +#118825 = EDGE_CURVE('',#118818,#118681,#118826,.T.); +#118826 = LINE('',#118827,#118828); +#118827 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#118828 = VECTOR('',#118829,1.); +#118829 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118830 = ORIENTED_EDGE('',*,*,#118680,.F.); +#118831 = PLANE('',#118832); +#118832 = AXIS2_PLACEMENT_3D('',#118833,#118834,#118835); +#118833 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#118834 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118835 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118836 = ADVANCED_FACE('',(#118837),#118862,.F.); +#118837 = FACE_BOUND('',#118838,.F.); +#118838 = EDGE_LOOP('',(#118839,#118847,#118855,#118861)); +#118839 = ORIENTED_EDGE('',*,*,#118840,.T.); +#118840 = EDGE_CURVE('',#116473,#118841,#118843,.T.); +#118841 = VERTEX_POINT('',#118842); +#118842 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#118843 = LINE('',#118844,#118845); +#118844 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#118845 = VECTOR('',#118846,1.); +#118846 = DIRECTION('',(0.,-0.,-1.)); +#118847 = ORIENTED_EDGE('',*,*,#118848,.T.); +#118848 = EDGE_CURVE('',#118841,#118849,#118851,.T.); +#118849 = VERTEX_POINT('',#118850); +#118850 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#118851 = LINE('',#118852,#118853); +#118852 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#118853 = VECTOR('',#118854,1.); +#118854 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118855 = ORIENTED_EDGE('',*,*,#118856,.F.); +#118856 = EDGE_CURVE('',#116482,#118849,#118857,.T.); +#118857 = LINE('',#118858,#118859); +#118858 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#118859 = VECTOR('',#118860,1.); +#118860 = DIRECTION('',(0.,-0.,-1.)); +#118861 = ORIENTED_EDGE('',*,*,#116489,.F.); +#118862 = PLANE('',#118863); +#118863 = AXIS2_PLACEMENT_3D('',#118864,#118865,#118866); +#118864 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#118865 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118866 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118867 = ADVANCED_FACE('',(#118868),#118918,.F.); +#118868 = FACE_BOUND('',#118869,.F.); +#118869 = EDGE_LOOP('',(#118870,#118871,#118872,#118880,#118888,#118896, + #118904,#118912)); +#118870 = ORIENTED_EDGE('',*,*,#116513,.F.); +#118871 = ORIENTED_EDGE('',*,*,#118856,.T.); +#118872 = ORIENTED_EDGE('',*,*,#118873,.T.); +#118873 = EDGE_CURVE('',#118849,#118874,#118876,.T.); +#118874 = VERTEX_POINT('',#118875); +#118875 = CARTESIAN_POINT('',(0.1,-17.48,0.9)); +#118876 = LINE('',#118877,#118878); +#118877 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#118878 = VECTOR('',#118879,1.); +#118879 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118880 = ORIENTED_EDGE('',*,*,#118881,.T.); +#118881 = EDGE_CURVE('',#118874,#118882,#118884,.T.); +#118882 = VERTEX_POINT('',#118883); +#118883 = CARTESIAN_POINT('',(0.1,-17.48,7.4)); +#118884 = LINE('',#118885,#118886); +#118885 = CARTESIAN_POINT('',(0.1,-17.48,6.055738799212)); +#118886 = VECTOR('',#118887,1.); +#118887 = DIRECTION('',(0.,-0.,1.)); +#118888 = ORIENTED_EDGE('',*,*,#118889,.F.); +#118889 = EDGE_CURVE('',#118890,#118882,#118892,.T.); +#118890 = VERTEX_POINT('',#118891); +#118891 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#118892 = LINE('',#118893,#118894); +#118893 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#118894 = VECTOR('',#118895,1.); +#118895 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118896 = ORIENTED_EDGE('',*,*,#118897,.F.); +#118897 = EDGE_CURVE('',#118898,#118890,#118900,.T.); +#118898 = VERTEX_POINT('',#118899); +#118899 = CARTESIAN_POINT('',(-0.1,-17.48,0.9)); +#118900 = LINE('',#118901,#118902); +#118901 = CARTESIAN_POINT('',(-0.1,-17.48,6.055738799212)); +#118902 = VECTOR('',#118903,1.); +#118903 = DIRECTION('',(0.,-0.,1.)); +#118904 = ORIENTED_EDGE('',*,*,#118905,.T.); +#118905 = EDGE_CURVE('',#118898,#118906,#118908,.T.); +#118906 = VERTEX_POINT('',#118907); +#118907 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#118908 = LINE('',#118909,#118910); +#118909 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#118910 = VECTOR('',#118911,1.); +#118911 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118912 = ORIENTED_EDGE('',*,*,#118913,.F.); +#118913 = EDGE_CURVE('',#116506,#118906,#118914,.T.); +#118914 = LINE('',#118915,#118916); +#118915 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#118916 = VECTOR('',#118917,1.); +#118917 = DIRECTION('',(0.,-0.,-1.)); +#118918 = PLANE('',#118919); +#118919 = AXIS2_PLACEMENT_3D('',#118920,#118921,#118922); +#118920 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#118921 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118922 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118923 = ADVANCED_FACE('',(#118924),#118942,.F.); +#118924 = FACE_BOUND('',#118925,.F.); +#118925 = EDGE_LOOP('',(#118926,#118927,#118935,#118941)); +#118926 = ORIENTED_EDGE('',*,*,#118913,.T.); +#118927 = ORIENTED_EDGE('',*,*,#118928,.T.); +#118928 = EDGE_CURVE('',#118906,#118929,#118931,.T.); +#118929 = VERTEX_POINT('',#118930); +#118930 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#118931 = LINE('',#118932,#118933); +#118932 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#118933 = VECTOR('',#118934,1.); +#118934 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118935 = ORIENTED_EDGE('',*,*,#118936,.F.); +#118936 = EDGE_CURVE('',#116530,#118929,#118937,.T.); +#118937 = LINE('',#118938,#118939); +#118938 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#118939 = VECTOR('',#118940,1.); +#118940 = DIRECTION('',(0.,-0.,-1.)); +#118941 = ORIENTED_EDGE('',*,*,#116537,.F.); +#118942 = PLANE('',#118943); +#118943 = AXIS2_PLACEMENT_3D('',#118944,#118945,#118946); +#118944 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#118945 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118947 = ADVANCED_FACE('',(#118948),#118991,.F.); +#118948 = FACE_BOUND('',#118949,.F.); +#118949 = EDGE_LOOP('',(#118950,#118951,#118952,#118960,#118968,#118976, + #118984,#118990)); +#118950 = ORIENTED_EDGE('',*,*,#116554,.F.); +#118951 = ORIENTED_EDGE('',*,*,#118936,.T.); +#118952 = ORIENTED_EDGE('',*,*,#118953,.T.); +#118953 = EDGE_CURVE('',#118929,#118954,#118956,.T.); +#118954 = VERTEX_POINT('',#118955); +#118955 = CARTESIAN_POINT('',(-0.1,-18.08,0.9)); +#118956 = LINE('',#118957,#118958); +#118957 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#118958 = VECTOR('',#118959,1.); +#118959 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118960 = ORIENTED_EDGE('',*,*,#118961,.F.); +#118961 = EDGE_CURVE('',#118962,#118954,#118964,.T.); +#118962 = VERTEX_POINT('',#118963); +#118963 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#118964 = LINE('',#118965,#118966); +#118965 = CARTESIAN_POINT('',(-0.1,-18.08,6.055738799212)); +#118966 = VECTOR('',#118967,1.); +#118967 = DIRECTION('',(-0.,0.,-1.)); +#118968 = ORIENTED_EDGE('',*,*,#118969,.T.); +#118969 = EDGE_CURVE('',#118962,#118970,#118972,.T.); +#118970 = VERTEX_POINT('',#118971); +#118971 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#118972 = LINE('',#118973,#118974); +#118973 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#118974 = VECTOR('',#118975,1.); +#118975 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118976 = ORIENTED_EDGE('',*,*,#118977,.T.); +#118977 = EDGE_CURVE('',#118970,#118978,#118980,.T.); +#118978 = VERTEX_POINT('',#118979); +#118979 = CARTESIAN_POINT('',(0.1,-18.08,0.9)); +#118980 = LINE('',#118981,#118982); +#118981 = CARTESIAN_POINT('',(0.1,-18.08,6.055738799212)); +#118982 = VECTOR('',#118983,1.); +#118983 = DIRECTION('',(-0.,0.,-1.)); +#118984 = ORIENTED_EDGE('',*,*,#118985,.T.); +#118985 = EDGE_CURVE('',#118978,#118841,#118986,.T.); +#118986 = LINE('',#118987,#118988); +#118987 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#118988 = VECTOR('',#118989,1.); +#118989 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118990 = ORIENTED_EDGE('',*,*,#118840,.F.); +#118991 = PLANE('',#118992); +#118992 = AXIS2_PLACEMENT_3D('',#118993,#118994,#118995); +#118993 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#118994 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118995 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118996 = ADVANCED_FACE('',(#118997),#119022,.F.); +#118997 = FACE_BOUND('',#118998,.F.); +#118998 = EDGE_LOOP('',(#118999,#119007,#119015,#119021)); +#118999 = ORIENTED_EDGE('',*,*,#119000,.T.); +#119000 = EDGE_CURVE('',#116569,#119001,#119003,.T.); +#119001 = VERTEX_POINT('',#119002); +#119002 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#119003 = LINE('',#119004,#119005); +#119004 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#119005 = VECTOR('',#119006,1.); +#119006 = DIRECTION('',(0.,-0.,-1.)); +#119007 = ORIENTED_EDGE('',*,*,#119008,.T.); +#119008 = EDGE_CURVE('',#119001,#119009,#119011,.T.); +#119009 = VERTEX_POINT('',#119010); +#119010 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#119011 = LINE('',#119012,#119013); +#119012 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#119013 = VECTOR('',#119014,1.); +#119014 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119015 = ORIENTED_EDGE('',*,*,#119016,.F.); +#119016 = EDGE_CURVE('',#116578,#119009,#119017,.T.); +#119017 = LINE('',#119018,#119019); +#119018 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#119019 = VECTOR('',#119020,1.); +#119020 = DIRECTION('',(0.,-0.,-1.)); +#119021 = ORIENTED_EDGE('',*,*,#116585,.F.); +#119022 = PLANE('',#119023); +#119023 = AXIS2_PLACEMENT_3D('',#119024,#119025,#119026); +#119024 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#119025 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119026 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119027 = ADVANCED_FACE('',(#119028),#119078,.F.); +#119028 = FACE_BOUND('',#119029,.F.); +#119029 = EDGE_LOOP('',(#119030,#119031,#119032,#119040,#119048,#119056, + #119064,#119072)); +#119030 = ORIENTED_EDGE('',*,*,#116609,.F.); +#119031 = ORIENTED_EDGE('',*,*,#119016,.T.); +#119032 = ORIENTED_EDGE('',*,*,#119033,.T.); +#119033 = EDGE_CURVE('',#119009,#119034,#119036,.T.); +#119034 = VERTEX_POINT('',#119035); +#119035 = CARTESIAN_POINT('',(0.1,-14.94,0.9)); +#119036 = LINE('',#119037,#119038); +#119037 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#119038 = VECTOR('',#119039,1.); +#119039 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119040 = ORIENTED_EDGE('',*,*,#119041,.T.); +#119041 = EDGE_CURVE('',#119034,#119042,#119044,.T.); +#119042 = VERTEX_POINT('',#119043); +#119043 = CARTESIAN_POINT('',(0.1,-14.94,7.4)); +#119044 = LINE('',#119045,#119046); +#119045 = CARTESIAN_POINT('',(0.1,-14.94,6.055738799212)); +#119046 = VECTOR('',#119047,1.); +#119047 = DIRECTION('',(0.,-0.,1.)); +#119048 = ORIENTED_EDGE('',*,*,#119049,.F.); +#119049 = EDGE_CURVE('',#119050,#119042,#119052,.T.); +#119050 = VERTEX_POINT('',#119051); +#119051 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#119052 = LINE('',#119053,#119054); +#119053 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#119054 = VECTOR('',#119055,1.); +#119055 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119056 = ORIENTED_EDGE('',*,*,#119057,.F.); +#119057 = EDGE_CURVE('',#119058,#119050,#119060,.T.); +#119058 = VERTEX_POINT('',#119059); +#119059 = CARTESIAN_POINT('',(-0.1,-14.94,0.9)); +#119060 = LINE('',#119061,#119062); +#119061 = CARTESIAN_POINT('',(-0.1,-14.94,6.055738799212)); +#119062 = VECTOR('',#119063,1.); +#119063 = DIRECTION('',(0.,-0.,1.)); +#119064 = ORIENTED_EDGE('',*,*,#119065,.T.); +#119065 = EDGE_CURVE('',#119058,#119066,#119068,.T.); +#119066 = VERTEX_POINT('',#119067); +#119067 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#119068 = LINE('',#119069,#119070); +#119069 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#119070 = VECTOR('',#119071,1.); +#119071 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119072 = ORIENTED_EDGE('',*,*,#119073,.F.); +#119073 = EDGE_CURVE('',#116602,#119066,#119074,.T.); +#119074 = LINE('',#119075,#119076); +#119075 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#119076 = VECTOR('',#119077,1.); +#119077 = DIRECTION('',(0.,-0.,-1.)); +#119078 = PLANE('',#119079); +#119079 = AXIS2_PLACEMENT_3D('',#119080,#119081,#119082); +#119080 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#119081 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119082 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119083 = ADVANCED_FACE('',(#119084),#119102,.F.); +#119084 = FACE_BOUND('',#119085,.F.); +#119085 = EDGE_LOOP('',(#119086,#119087,#119095,#119101)); +#119086 = ORIENTED_EDGE('',*,*,#119073,.T.); +#119087 = ORIENTED_EDGE('',*,*,#119088,.T.); +#119088 = EDGE_CURVE('',#119066,#119089,#119091,.T.); +#119089 = VERTEX_POINT('',#119090); +#119090 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#119091 = LINE('',#119092,#119093); +#119092 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#119093 = VECTOR('',#119094,1.); +#119094 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119095 = ORIENTED_EDGE('',*,*,#119096,.F.); +#119096 = EDGE_CURVE('',#116626,#119089,#119097,.T.); +#119097 = LINE('',#119098,#119099); +#119098 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#119099 = VECTOR('',#119100,1.); +#119100 = DIRECTION('',(0.,-0.,-1.)); +#119101 = ORIENTED_EDGE('',*,*,#116633,.F.); +#119102 = PLANE('',#119103); +#119103 = AXIS2_PLACEMENT_3D('',#119104,#119105,#119106); +#119104 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#119105 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119106 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119107 = ADVANCED_FACE('',(#119108),#119151,.F.); +#119108 = FACE_BOUND('',#119109,.F.); +#119109 = EDGE_LOOP('',(#119110,#119111,#119112,#119120,#119128,#119136, + #119144,#119150)); +#119110 = ORIENTED_EDGE('',*,*,#116650,.F.); +#119111 = ORIENTED_EDGE('',*,*,#119096,.T.); +#119112 = ORIENTED_EDGE('',*,*,#119113,.T.); +#119113 = EDGE_CURVE('',#119089,#119114,#119116,.T.); +#119114 = VERTEX_POINT('',#119115); +#119115 = CARTESIAN_POINT('',(-0.1,-15.54,0.9)); +#119116 = LINE('',#119117,#119118); +#119117 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#119118 = VECTOR('',#119119,1.); +#119119 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119120 = ORIENTED_EDGE('',*,*,#119121,.F.); +#119121 = EDGE_CURVE('',#119122,#119114,#119124,.T.); +#119122 = VERTEX_POINT('',#119123); +#119123 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#119124 = LINE('',#119125,#119126); +#119125 = CARTESIAN_POINT('',(-0.1,-15.54,6.055738799212)); +#119126 = VECTOR('',#119127,1.); +#119127 = DIRECTION('',(-0.,0.,-1.)); +#119128 = ORIENTED_EDGE('',*,*,#119129,.T.); +#119129 = EDGE_CURVE('',#119122,#119130,#119132,.T.); +#119130 = VERTEX_POINT('',#119131); +#119131 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#119132 = LINE('',#119133,#119134); +#119133 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#119134 = VECTOR('',#119135,1.); +#119135 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119136 = ORIENTED_EDGE('',*,*,#119137,.T.); +#119137 = EDGE_CURVE('',#119130,#119138,#119140,.T.); +#119138 = VERTEX_POINT('',#119139); +#119139 = CARTESIAN_POINT('',(0.1,-15.54,0.9)); +#119140 = LINE('',#119141,#119142); +#119141 = CARTESIAN_POINT('',(0.1,-15.54,6.055738799212)); +#119142 = VECTOR('',#119143,1.); +#119143 = DIRECTION('',(-0.,0.,-1.)); +#119144 = ORIENTED_EDGE('',*,*,#119145,.T.); +#119145 = EDGE_CURVE('',#119138,#119001,#119146,.T.); +#119146 = LINE('',#119147,#119148); +#119147 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#119148 = VECTOR('',#119149,1.); +#119149 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119150 = ORIENTED_EDGE('',*,*,#119000,.F.); +#119151 = PLANE('',#119152); +#119152 = AXIS2_PLACEMENT_3D('',#119153,#119154,#119155); +#119153 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#119154 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119155 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119156 = ADVANCED_FACE('',(#119157),#119182,.F.); +#119157 = FACE_BOUND('',#119158,.F.); +#119158 = EDGE_LOOP('',(#119159,#119167,#119175,#119181)); +#119159 = ORIENTED_EDGE('',*,*,#119160,.T.); +#119160 = EDGE_CURVE('',#116665,#119161,#119163,.T.); +#119161 = VERTEX_POINT('',#119162); +#119162 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#119163 = LINE('',#119164,#119165); +#119164 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#119165 = VECTOR('',#119166,1.); +#119166 = DIRECTION('',(0.,-0.,-1.)); +#119167 = ORIENTED_EDGE('',*,*,#119168,.T.); +#119168 = EDGE_CURVE('',#119161,#119169,#119171,.T.); +#119169 = VERTEX_POINT('',#119170); +#119170 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#119171 = LINE('',#119172,#119173); +#119172 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#119173 = VECTOR('',#119174,1.); +#119174 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119175 = ORIENTED_EDGE('',*,*,#119176,.F.); +#119176 = EDGE_CURVE('',#116674,#119169,#119177,.T.); +#119177 = LINE('',#119178,#119179); +#119178 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#119179 = VECTOR('',#119180,1.); +#119180 = DIRECTION('',(0.,-0.,-1.)); +#119181 = ORIENTED_EDGE('',*,*,#116681,.F.); +#119182 = PLANE('',#119183); +#119183 = AXIS2_PLACEMENT_3D('',#119184,#119185,#119186); +#119184 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#119185 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119186 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119187 = ADVANCED_FACE('',(#119188),#119238,.F.); +#119188 = FACE_BOUND('',#119189,.F.); +#119189 = EDGE_LOOP('',(#119190,#119191,#119192,#119200,#119208,#119216, + #119224,#119232)); +#119190 = ORIENTED_EDGE('',*,*,#116705,.F.); +#119191 = ORIENTED_EDGE('',*,*,#119176,.T.); +#119192 = ORIENTED_EDGE('',*,*,#119193,.T.); +#119193 = EDGE_CURVE('',#119169,#119194,#119196,.T.); +#119194 = VERTEX_POINT('',#119195); +#119195 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#119196 = LINE('',#119197,#119198); +#119197 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#119198 = VECTOR('',#119199,1.); +#119199 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119200 = ORIENTED_EDGE('',*,*,#119201,.T.); +#119201 = EDGE_CURVE('',#119194,#119202,#119204,.T.); +#119202 = VERTEX_POINT('',#119203); +#119203 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#119204 = LINE('',#119205,#119206); +#119205 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#119206 = VECTOR('',#119207,1.); +#119207 = DIRECTION('',(0.,-0.,1.)); +#119208 = ORIENTED_EDGE('',*,*,#119209,.F.); +#119209 = EDGE_CURVE('',#119210,#119202,#119212,.T.); +#119210 = VERTEX_POINT('',#119211); +#119211 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#119212 = LINE('',#119213,#119214); +#119213 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#119214 = VECTOR('',#119215,1.); +#119215 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119216 = ORIENTED_EDGE('',*,*,#119217,.F.); +#119217 = EDGE_CURVE('',#119218,#119210,#119220,.T.); +#119218 = VERTEX_POINT('',#119219); +#119219 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#119220 = LINE('',#119221,#119222); +#119221 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#119222 = VECTOR('',#119223,1.); +#119223 = DIRECTION('',(0.,-0.,1.)); +#119224 = ORIENTED_EDGE('',*,*,#119225,.T.); +#119225 = EDGE_CURVE('',#119218,#119226,#119228,.T.); +#119226 = VERTEX_POINT('',#119227); +#119227 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#119228 = LINE('',#119229,#119230); +#119229 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#119230 = VECTOR('',#119231,1.); +#119231 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119232 = ORIENTED_EDGE('',*,*,#119233,.F.); +#119233 = EDGE_CURVE('',#116698,#119226,#119234,.T.); +#119234 = LINE('',#119235,#119236); +#119235 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#119236 = VECTOR('',#119237,1.); +#119237 = DIRECTION('',(0.,-0.,-1.)); +#119238 = PLANE('',#119239); +#119239 = AXIS2_PLACEMENT_3D('',#119240,#119241,#119242); +#119240 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#119241 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119242 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119243 = ADVANCED_FACE('',(#119244),#119262,.F.); +#119244 = FACE_BOUND('',#119245,.F.); +#119245 = EDGE_LOOP('',(#119246,#119247,#119255,#119261)); +#119246 = ORIENTED_EDGE('',*,*,#119233,.T.); +#119247 = ORIENTED_EDGE('',*,*,#119248,.T.); +#119248 = EDGE_CURVE('',#119226,#119249,#119251,.T.); +#119249 = VERTEX_POINT('',#119250); +#119250 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#119251 = LINE('',#119252,#119253); +#119252 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#119253 = VECTOR('',#119254,1.); +#119254 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119255 = ORIENTED_EDGE('',*,*,#119256,.F.); +#119256 = EDGE_CURVE('',#116722,#119249,#119257,.T.); +#119257 = LINE('',#119258,#119259); +#119258 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#119259 = VECTOR('',#119260,1.); +#119260 = DIRECTION('',(0.,-0.,-1.)); +#119261 = ORIENTED_EDGE('',*,*,#116729,.F.); +#119262 = PLANE('',#119263); +#119263 = AXIS2_PLACEMENT_3D('',#119264,#119265,#119266); +#119264 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#119265 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119266 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119267 = ADVANCED_FACE('',(#119268),#119311,.F.); +#119268 = FACE_BOUND('',#119269,.F.); +#119269 = EDGE_LOOP('',(#119270,#119271,#119272,#119280,#119288,#119296, + #119304,#119310)); +#119270 = ORIENTED_EDGE('',*,*,#116746,.F.); +#119271 = ORIENTED_EDGE('',*,*,#119256,.T.); +#119272 = ORIENTED_EDGE('',*,*,#119273,.T.); +#119273 = EDGE_CURVE('',#119249,#119274,#119276,.T.); +#119274 = VERTEX_POINT('',#119275); +#119275 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#119276 = LINE('',#119277,#119278); +#119277 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#119278 = VECTOR('',#119279,1.); +#119279 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119280 = ORIENTED_EDGE('',*,*,#119281,.F.); +#119281 = EDGE_CURVE('',#119282,#119274,#119284,.T.); +#119282 = VERTEX_POINT('',#119283); +#119283 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#119284 = LINE('',#119285,#119286); +#119285 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#119286 = VECTOR('',#119287,1.); +#119287 = DIRECTION('',(-0.,0.,-1.)); +#119288 = ORIENTED_EDGE('',*,*,#119289,.T.); +#119289 = EDGE_CURVE('',#119282,#119290,#119292,.T.); +#119290 = VERTEX_POINT('',#119291); +#119291 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#119292 = LINE('',#119293,#119294); +#119293 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#119294 = VECTOR('',#119295,1.); +#119295 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119296 = ORIENTED_EDGE('',*,*,#119297,.T.); +#119297 = EDGE_CURVE('',#119290,#119298,#119300,.T.); +#119298 = VERTEX_POINT('',#119299); +#119299 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#119300 = LINE('',#119301,#119302); +#119301 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#119302 = VECTOR('',#119303,1.); +#119303 = DIRECTION('',(-0.,0.,-1.)); +#119304 = ORIENTED_EDGE('',*,*,#119305,.T.); +#119305 = EDGE_CURVE('',#119298,#119161,#119306,.T.); +#119306 = LINE('',#119307,#119308); +#119307 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#119308 = VECTOR('',#119309,1.); +#119309 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119310 = ORIENTED_EDGE('',*,*,#119160,.F.); +#119311 = PLANE('',#119312); +#119312 = AXIS2_PLACEMENT_3D('',#119313,#119314,#119315); +#119313 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#119314 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119315 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119316 = ADVANCED_FACE('',(#119317),#119342,.F.); +#119317 = FACE_BOUND('',#119318,.F.); +#119318 = EDGE_LOOP('',(#119319,#119327,#119335,#119341)); +#119319 = ORIENTED_EDGE('',*,*,#119320,.T.); +#119320 = EDGE_CURVE('',#116761,#119321,#119323,.T.); +#119321 = VERTEX_POINT('',#119322); +#119322 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#119323 = LINE('',#119324,#119325); +#119324 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#119325 = VECTOR('',#119326,1.); +#119326 = DIRECTION('',(0.,-0.,-1.)); +#119327 = ORIENTED_EDGE('',*,*,#119328,.T.); +#119328 = EDGE_CURVE('',#119321,#119329,#119331,.T.); +#119329 = VERTEX_POINT('',#119330); +#119330 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#119331 = LINE('',#119332,#119333); +#119332 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#119333 = VECTOR('',#119334,1.); +#119334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119335 = ORIENTED_EDGE('',*,*,#119336,.F.); +#119336 = EDGE_CURVE('',#116770,#119329,#119337,.T.); +#119337 = LINE('',#119338,#119339); +#119338 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#119339 = VECTOR('',#119340,1.); +#119340 = DIRECTION('',(0.,-0.,-1.)); +#119341 = ORIENTED_EDGE('',*,*,#116777,.F.); +#119342 = PLANE('',#119343); +#119343 = AXIS2_PLACEMENT_3D('',#119344,#119345,#119346); +#119344 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#119345 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119346 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119347 = ADVANCED_FACE('',(#119348),#119398,.F.); +#119348 = FACE_BOUND('',#119349,.F.); +#119349 = EDGE_LOOP('',(#119350,#119351,#119352,#119360,#119368,#119376, + #119384,#119392)); +#119350 = ORIENTED_EDGE('',*,*,#116801,.F.); +#119351 = ORIENTED_EDGE('',*,*,#119336,.T.); +#119352 = ORIENTED_EDGE('',*,*,#119353,.T.); +#119353 = EDGE_CURVE('',#119329,#119354,#119356,.T.); +#119354 = VERTEX_POINT('',#119355); +#119355 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#119356 = LINE('',#119357,#119358); +#119357 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#119358 = VECTOR('',#119359,1.); +#119359 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119360 = ORIENTED_EDGE('',*,*,#119361,.T.); +#119361 = EDGE_CURVE('',#119354,#119362,#119364,.T.); +#119362 = VERTEX_POINT('',#119363); +#119363 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#119364 = LINE('',#119365,#119366); +#119365 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#119366 = VECTOR('',#119367,1.); +#119367 = DIRECTION('',(0.,-0.,1.)); +#119368 = ORIENTED_EDGE('',*,*,#119369,.F.); +#119369 = EDGE_CURVE('',#119370,#119362,#119372,.T.); +#119370 = VERTEX_POINT('',#119371); +#119371 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#119372 = LINE('',#119373,#119374); +#119373 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#119374 = VECTOR('',#119375,1.); +#119375 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119376 = ORIENTED_EDGE('',*,*,#119377,.F.); +#119377 = EDGE_CURVE('',#119378,#119370,#119380,.T.); +#119378 = VERTEX_POINT('',#119379); +#119379 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#119380 = LINE('',#119381,#119382); +#119381 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#119382 = VECTOR('',#119383,1.); +#119383 = DIRECTION('',(0.,-0.,1.)); +#119384 = ORIENTED_EDGE('',*,*,#119385,.T.); +#119385 = EDGE_CURVE('',#119378,#119386,#119388,.T.); +#119386 = VERTEX_POINT('',#119387); +#119387 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#119388 = LINE('',#119389,#119390); +#119389 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#119390 = VECTOR('',#119391,1.); +#119391 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119392 = ORIENTED_EDGE('',*,*,#119393,.F.); +#119393 = EDGE_CURVE('',#116794,#119386,#119394,.T.); +#119394 = LINE('',#119395,#119396); +#119395 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#119396 = VECTOR('',#119397,1.); +#119397 = DIRECTION('',(0.,-0.,-1.)); +#119398 = PLANE('',#119399); +#119399 = AXIS2_PLACEMENT_3D('',#119400,#119401,#119402); +#119400 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#119401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119402 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119403 = ADVANCED_FACE('',(#119404),#119422,.F.); +#119404 = FACE_BOUND('',#119405,.F.); +#119405 = EDGE_LOOP('',(#119406,#119407,#119415,#119421)); +#119406 = ORIENTED_EDGE('',*,*,#119393,.T.); +#119407 = ORIENTED_EDGE('',*,*,#119408,.T.); +#119408 = EDGE_CURVE('',#119386,#119409,#119411,.T.); +#119409 = VERTEX_POINT('',#119410); +#119410 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#119411 = LINE('',#119412,#119413); +#119412 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#119413 = VECTOR('',#119414,1.); +#119414 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119415 = ORIENTED_EDGE('',*,*,#119416,.F.); +#119416 = EDGE_CURVE('',#116818,#119409,#119417,.T.); +#119417 = LINE('',#119418,#119419); +#119418 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#119419 = VECTOR('',#119420,1.); +#119420 = DIRECTION('',(0.,-0.,-1.)); +#119421 = ORIENTED_EDGE('',*,*,#116825,.F.); +#119422 = PLANE('',#119423); +#119423 = AXIS2_PLACEMENT_3D('',#119424,#119425,#119426); +#119424 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#119425 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119426 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119427 = ADVANCED_FACE('',(#119428),#119471,.F.); +#119428 = FACE_BOUND('',#119429,.F.); +#119429 = EDGE_LOOP('',(#119430,#119431,#119432,#119440,#119448,#119456, + #119464,#119470)); +#119430 = ORIENTED_EDGE('',*,*,#116842,.F.); +#119431 = ORIENTED_EDGE('',*,*,#119416,.T.); +#119432 = ORIENTED_EDGE('',*,*,#119433,.T.); +#119433 = EDGE_CURVE('',#119409,#119434,#119436,.T.); +#119434 = VERTEX_POINT('',#119435); +#119435 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#119436 = LINE('',#119437,#119438); +#119437 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#119438 = VECTOR('',#119439,1.); +#119439 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119440 = ORIENTED_EDGE('',*,*,#119441,.F.); +#119441 = EDGE_CURVE('',#119442,#119434,#119444,.T.); +#119442 = VERTEX_POINT('',#119443); +#119443 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#119444 = LINE('',#119445,#119446); +#119445 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#119446 = VECTOR('',#119447,1.); +#119447 = DIRECTION('',(-0.,0.,-1.)); +#119448 = ORIENTED_EDGE('',*,*,#119449,.T.); +#119449 = EDGE_CURVE('',#119442,#119450,#119452,.T.); +#119450 = VERTEX_POINT('',#119451); +#119451 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#119452 = LINE('',#119453,#119454); +#119453 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#119454 = VECTOR('',#119455,1.); +#119455 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119456 = ORIENTED_EDGE('',*,*,#119457,.T.); +#119457 = EDGE_CURVE('',#119450,#119458,#119460,.T.); +#119458 = VERTEX_POINT('',#119459); +#119459 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#119460 = LINE('',#119461,#119462); +#119461 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#119462 = VECTOR('',#119463,1.); +#119463 = DIRECTION('',(-0.,0.,-1.)); +#119464 = ORIENTED_EDGE('',*,*,#119465,.T.); +#119465 = EDGE_CURVE('',#119458,#119321,#119466,.T.); +#119466 = LINE('',#119467,#119468); +#119467 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#119468 = VECTOR('',#119469,1.); +#119469 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119470 = ORIENTED_EDGE('',*,*,#119320,.F.); +#119471 = PLANE('',#119472); +#119472 = AXIS2_PLACEMENT_3D('',#119473,#119474,#119475); +#119473 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#119474 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119476 = ADVANCED_FACE('',(#119477),#119502,.F.); +#119477 = FACE_BOUND('',#119478,.F.); +#119478 = EDGE_LOOP('',(#119479,#119487,#119495,#119501)); +#119479 = ORIENTED_EDGE('',*,*,#119480,.T.); +#119480 = EDGE_CURVE('',#116857,#119481,#119483,.T.); +#119481 = VERTEX_POINT('',#119482); +#119482 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#119483 = LINE('',#119484,#119485); +#119484 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#119485 = VECTOR('',#119486,1.); +#119486 = DIRECTION('',(0.,-0.,-1.)); +#119487 = ORIENTED_EDGE('',*,*,#119488,.T.); +#119488 = EDGE_CURVE('',#119481,#119489,#119491,.T.); +#119489 = VERTEX_POINT('',#119490); +#119490 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#119491 = LINE('',#119492,#119493); +#119492 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#119493 = VECTOR('',#119494,1.); +#119494 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119495 = ORIENTED_EDGE('',*,*,#119496,.F.); +#119496 = EDGE_CURVE('',#116866,#119489,#119497,.T.); +#119497 = LINE('',#119498,#119499); +#119498 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#119499 = VECTOR('',#119500,1.); +#119500 = DIRECTION('',(0.,-0.,-1.)); +#119501 = ORIENTED_EDGE('',*,*,#116873,.F.); +#119502 = PLANE('',#119503); +#119503 = AXIS2_PLACEMENT_3D('',#119504,#119505,#119506); +#119504 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#119505 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119506 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119507 = ADVANCED_FACE('',(#119508),#119558,.F.); +#119508 = FACE_BOUND('',#119509,.F.); +#119509 = EDGE_LOOP('',(#119510,#119511,#119512,#119520,#119528,#119536, + #119544,#119552)); +#119510 = ORIENTED_EDGE('',*,*,#116897,.F.); +#119511 = ORIENTED_EDGE('',*,*,#119496,.T.); +#119512 = ORIENTED_EDGE('',*,*,#119513,.T.); +#119513 = EDGE_CURVE('',#119489,#119514,#119516,.T.); +#119514 = VERTEX_POINT('',#119515); +#119515 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#119516 = LINE('',#119517,#119518); +#119517 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#119518 = VECTOR('',#119519,1.); +#119519 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119520 = ORIENTED_EDGE('',*,*,#119521,.T.); +#119521 = EDGE_CURVE('',#119514,#119522,#119524,.T.); +#119522 = VERTEX_POINT('',#119523); +#119523 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#119524 = LINE('',#119525,#119526); +#119525 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#119526 = VECTOR('',#119527,1.); +#119527 = DIRECTION('',(0.,-0.,1.)); +#119528 = ORIENTED_EDGE('',*,*,#119529,.F.); +#119529 = EDGE_CURVE('',#119530,#119522,#119532,.T.); +#119530 = VERTEX_POINT('',#119531); +#119531 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#119532 = LINE('',#119533,#119534); +#119533 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#119534 = VECTOR('',#119535,1.); +#119535 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119536 = ORIENTED_EDGE('',*,*,#119537,.F.); +#119537 = EDGE_CURVE('',#119538,#119530,#119540,.T.); +#119538 = VERTEX_POINT('',#119539); +#119539 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#119540 = LINE('',#119541,#119542); +#119541 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#119542 = VECTOR('',#119543,1.); +#119543 = DIRECTION('',(0.,-0.,1.)); +#119544 = ORIENTED_EDGE('',*,*,#119545,.T.); +#119545 = EDGE_CURVE('',#119538,#119546,#119548,.T.); +#119546 = VERTEX_POINT('',#119547); +#119547 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#119548 = LINE('',#119549,#119550); +#119549 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#119550 = VECTOR('',#119551,1.); +#119551 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119552 = ORIENTED_EDGE('',*,*,#119553,.F.); +#119553 = EDGE_CURVE('',#116890,#119546,#119554,.T.); +#119554 = LINE('',#119555,#119556); +#119555 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#119556 = VECTOR('',#119557,1.); +#119557 = DIRECTION('',(0.,-0.,-1.)); +#119558 = PLANE('',#119559); +#119559 = AXIS2_PLACEMENT_3D('',#119560,#119561,#119562); +#119560 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#119561 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119562 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119563 = ADVANCED_FACE('',(#119564),#119582,.F.); +#119564 = FACE_BOUND('',#119565,.F.); +#119565 = EDGE_LOOP('',(#119566,#119567,#119575,#119581)); +#119566 = ORIENTED_EDGE('',*,*,#119553,.T.); +#119567 = ORIENTED_EDGE('',*,*,#119568,.T.); +#119568 = EDGE_CURVE('',#119546,#119569,#119571,.T.); +#119569 = VERTEX_POINT('',#119570); +#119570 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#119571 = LINE('',#119572,#119573); +#119572 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#119573 = VECTOR('',#119574,1.); +#119574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119575 = ORIENTED_EDGE('',*,*,#119576,.F.); +#119576 = EDGE_CURVE('',#116914,#119569,#119577,.T.); +#119577 = LINE('',#119578,#119579); +#119578 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#119579 = VECTOR('',#119580,1.); +#119580 = DIRECTION('',(0.,-0.,-1.)); +#119581 = ORIENTED_EDGE('',*,*,#116921,.F.); +#119582 = PLANE('',#119583); +#119583 = AXIS2_PLACEMENT_3D('',#119584,#119585,#119586); +#119584 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#119585 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119586 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119587 = ADVANCED_FACE('',(#119588),#119631,.F.); +#119588 = FACE_BOUND('',#119589,.F.); +#119589 = EDGE_LOOP('',(#119590,#119591,#119592,#119600,#119608,#119616, + #119624,#119630)); +#119590 = ORIENTED_EDGE('',*,*,#116938,.F.); +#119591 = ORIENTED_EDGE('',*,*,#119576,.T.); +#119592 = ORIENTED_EDGE('',*,*,#119593,.T.); +#119593 = EDGE_CURVE('',#119569,#119594,#119596,.T.); +#119594 = VERTEX_POINT('',#119595); +#119595 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#119596 = LINE('',#119597,#119598); +#119597 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#119598 = VECTOR('',#119599,1.); +#119599 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119600 = ORIENTED_EDGE('',*,*,#119601,.F.); +#119601 = EDGE_CURVE('',#119602,#119594,#119604,.T.); +#119602 = VERTEX_POINT('',#119603); +#119603 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#119604 = LINE('',#119605,#119606); +#119605 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#119606 = VECTOR('',#119607,1.); +#119607 = DIRECTION('',(-0.,0.,-1.)); +#119608 = ORIENTED_EDGE('',*,*,#119609,.T.); +#119609 = EDGE_CURVE('',#119602,#119610,#119612,.T.); +#119610 = VERTEX_POINT('',#119611); +#119611 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#119612 = LINE('',#119613,#119614); +#119613 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#119614 = VECTOR('',#119615,1.); +#119615 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119616 = ORIENTED_EDGE('',*,*,#119617,.T.); +#119617 = EDGE_CURVE('',#119610,#119618,#119620,.T.); +#119618 = VERTEX_POINT('',#119619); +#119619 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#119620 = LINE('',#119621,#119622); +#119621 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#119622 = VECTOR('',#119623,1.); +#119623 = DIRECTION('',(-0.,0.,-1.)); +#119624 = ORIENTED_EDGE('',*,*,#119625,.T.); +#119625 = EDGE_CURVE('',#119618,#119481,#119626,.T.); +#119626 = LINE('',#119627,#119628); +#119627 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#119628 = VECTOR('',#119629,1.); +#119629 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119630 = ORIENTED_EDGE('',*,*,#119480,.F.); +#119631 = PLANE('',#119632); +#119632 = AXIS2_PLACEMENT_3D('',#119633,#119634,#119635); +#119633 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#119634 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119635 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119636 = ADVANCED_FACE('',(#119637),#119662,.F.); +#119637 = FACE_BOUND('',#119638,.F.); +#119638 = EDGE_LOOP('',(#119639,#119647,#119655,#119661)); +#119639 = ORIENTED_EDGE('',*,*,#119640,.T.); +#119640 = EDGE_CURVE('',#116953,#119641,#119643,.T.); +#119641 = VERTEX_POINT('',#119642); +#119642 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#119643 = LINE('',#119644,#119645); +#119644 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#119645 = VECTOR('',#119646,1.); +#119646 = DIRECTION('',(0.,-0.,-1.)); +#119647 = ORIENTED_EDGE('',*,*,#119648,.T.); +#119648 = EDGE_CURVE('',#119641,#119649,#119651,.T.); +#119649 = VERTEX_POINT('',#119650); +#119650 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#119651 = LINE('',#119652,#119653); +#119652 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#119653 = VECTOR('',#119654,1.); +#119654 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119655 = ORIENTED_EDGE('',*,*,#119656,.F.); +#119656 = EDGE_CURVE('',#116962,#119649,#119657,.T.); +#119657 = LINE('',#119658,#119659); +#119658 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#119659 = VECTOR('',#119660,1.); +#119660 = DIRECTION('',(0.,-0.,-1.)); +#119661 = ORIENTED_EDGE('',*,*,#116969,.F.); +#119662 = PLANE('',#119663); +#119663 = AXIS2_PLACEMENT_3D('',#119664,#119665,#119666); +#119664 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#119665 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119667 = ADVANCED_FACE('',(#119668),#119718,.F.); +#119668 = FACE_BOUND('',#119669,.F.); +#119669 = EDGE_LOOP('',(#119670,#119671,#119672,#119680,#119688,#119696, + #119704,#119712)); +#119670 = ORIENTED_EDGE('',*,*,#116993,.F.); +#119671 = ORIENTED_EDGE('',*,*,#119656,.T.); +#119672 = ORIENTED_EDGE('',*,*,#119673,.T.); +#119673 = EDGE_CURVE('',#119649,#119674,#119676,.T.); +#119674 = VERTEX_POINT('',#119675); +#119675 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#119676 = LINE('',#119677,#119678); +#119677 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#119678 = VECTOR('',#119679,1.); +#119679 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119680 = ORIENTED_EDGE('',*,*,#119681,.T.); +#119681 = EDGE_CURVE('',#119674,#119682,#119684,.T.); +#119682 = VERTEX_POINT('',#119683); +#119683 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#119684 = LINE('',#119685,#119686); +#119685 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#119686 = VECTOR('',#119687,1.); +#119687 = DIRECTION('',(0.,-0.,1.)); +#119688 = ORIENTED_EDGE('',*,*,#119689,.F.); +#119689 = EDGE_CURVE('',#119690,#119682,#119692,.T.); +#119690 = VERTEX_POINT('',#119691); +#119691 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#119692 = LINE('',#119693,#119694); +#119693 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#119694 = VECTOR('',#119695,1.); +#119695 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119696 = ORIENTED_EDGE('',*,*,#119697,.F.); +#119697 = EDGE_CURVE('',#119698,#119690,#119700,.T.); +#119698 = VERTEX_POINT('',#119699); +#119699 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#119700 = LINE('',#119701,#119702); +#119701 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#119702 = VECTOR('',#119703,1.); +#119703 = DIRECTION('',(0.,-0.,1.)); +#119704 = ORIENTED_EDGE('',*,*,#119705,.T.); +#119705 = EDGE_CURVE('',#119698,#119706,#119708,.T.); +#119706 = VERTEX_POINT('',#119707); +#119707 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#119708 = LINE('',#119709,#119710); +#119709 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#119710 = VECTOR('',#119711,1.); +#119711 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119712 = ORIENTED_EDGE('',*,*,#119713,.F.); +#119713 = EDGE_CURVE('',#116986,#119706,#119714,.T.); +#119714 = LINE('',#119715,#119716); +#119715 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#119716 = VECTOR('',#119717,1.); +#119717 = DIRECTION('',(0.,-0.,-1.)); +#119718 = PLANE('',#119719); +#119719 = AXIS2_PLACEMENT_3D('',#119720,#119721,#119722); +#119720 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#119721 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119722 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119723 = ADVANCED_FACE('',(#119724),#119742,.F.); +#119724 = FACE_BOUND('',#119725,.F.); +#119725 = EDGE_LOOP('',(#119726,#119727,#119735,#119741)); +#119726 = ORIENTED_EDGE('',*,*,#119713,.T.); +#119727 = ORIENTED_EDGE('',*,*,#119728,.T.); +#119728 = EDGE_CURVE('',#119706,#119729,#119731,.T.); +#119729 = VERTEX_POINT('',#119730); +#119730 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#119731 = LINE('',#119732,#119733); +#119732 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#119733 = VECTOR('',#119734,1.); +#119734 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119735 = ORIENTED_EDGE('',*,*,#119736,.F.); +#119736 = EDGE_CURVE('',#117010,#119729,#119737,.T.); +#119737 = LINE('',#119738,#119739); +#119738 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#119739 = VECTOR('',#119740,1.); +#119740 = DIRECTION('',(0.,-0.,-1.)); +#119741 = ORIENTED_EDGE('',*,*,#117017,.F.); +#119742 = PLANE('',#119743); +#119743 = AXIS2_PLACEMENT_3D('',#119744,#119745,#119746); +#119744 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#119745 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119747 = ADVANCED_FACE('',(#119748),#119791,.F.); +#119748 = FACE_BOUND('',#119749,.F.); +#119749 = EDGE_LOOP('',(#119750,#119751,#119752,#119760,#119768,#119776, + #119784,#119790)); +#119750 = ORIENTED_EDGE('',*,*,#117034,.F.); +#119751 = ORIENTED_EDGE('',*,*,#119736,.T.); +#119752 = ORIENTED_EDGE('',*,*,#119753,.T.); +#119753 = EDGE_CURVE('',#119729,#119754,#119756,.T.); +#119754 = VERTEX_POINT('',#119755); +#119755 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#119756 = LINE('',#119757,#119758); +#119757 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#119758 = VECTOR('',#119759,1.); +#119759 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119760 = ORIENTED_EDGE('',*,*,#119761,.F.); +#119761 = EDGE_CURVE('',#119762,#119754,#119764,.T.); +#119762 = VERTEX_POINT('',#119763); +#119763 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#119764 = LINE('',#119765,#119766); +#119765 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#119766 = VECTOR('',#119767,1.); +#119767 = DIRECTION('',(-0.,0.,-1.)); +#119768 = ORIENTED_EDGE('',*,*,#119769,.T.); +#119769 = EDGE_CURVE('',#119762,#119770,#119772,.T.); +#119770 = VERTEX_POINT('',#119771); +#119771 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#119772 = LINE('',#119773,#119774); +#119773 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#119774 = VECTOR('',#119775,1.); +#119775 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119776 = ORIENTED_EDGE('',*,*,#119777,.T.); +#119777 = EDGE_CURVE('',#119770,#119778,#119780,.T.); +#119778 = VERTEX_POINT('',#119779); +#119779 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#119780 = LINE('',#119781,#119782); +#119781 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#119782 = VECTOR('',#119783,1.); +#119783 = DIRECTION('',(-0.,0.,-1.)); +#119784 = ORIENTED_EDGE('',*,*,#119785,.T.); +#119785 = EDGE_CURVE('',#119778,#119641,#119786,.T.); +#119786 = LINE('',#119787,#119788); +#119787 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#119788 = VECTOR('',#119789,1.); +#119789 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119790 = ORIENTED_EDGE('',*,*,#119640,.F.); +#119791 = PLANE('',#119792); +#119792 = AXIS2_PLACEMENT_3D('',#119793,#119794,#119795); +#119793 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#119794 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119796 = ADVANCED_FACE('',(#119797),#119822,.F.); +#119797 = FACE_BOUND('',#119798,.F.); +#119798 = EDGE_LOOP('',(#119799,#119807,#119815,#119821)); +#119799 = ORIENTED_EDGE('',*,*,#119800,.T.); +#119800 = EDGE_CURVE('',#117049,#119801,#119803,.T.); +#119801 = VERTEX_POINT('',#119802); +#119802 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#119803 = LINE('',#119804,#119805); +#119804 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#119805 = VECTOR('',#119806,1.); +#119806 = DIRECTION('',(0.,-0.,-1.)); +#119807 = ORIENTED_EDGE('',*,*,#119808,.T.); +#119808 = EDGE_CURVE('',#119801,#119809,#119811,.T.); +#119809 = VERTEX_POINT('',#119810); +#119810 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#119811 = LINE('',#119812,#119813); +#119812 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#119813 = VECTOR('',#119814,1.); +#119814 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119815 = ORIENTED_EDGE('',*,*,#119816,.F.); +#119816 = EDGE_CURVE('',#117058,#119809,#119817,.T.); +#119817 = LINE('',#119818,#119819); +#119818 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#119819 = VECTOR('',#119820,1.); +#119820 = DIRECTION('',(0.,-0.,-1.)); +#119821 = ORIENTED_EDGE('',*,*,#117065,.F.); +#119822 = PLANE('',#119823); +#119823 = AXIS2_PLACEMENT_3D('',#119824,#119825,#119826); +#119824 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#119825 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119826 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119827 = ADVANCED_FACE('',(#119828),#119878,.F.); +#119828 = FACE_BOUND('',#119829,.F.); +#119829 = EDGE_LOOP('',(#119830,#119831,#119832,#119840,#119848,#119856, + #119864,#119872)); +#119830 = ORIENTED_EDGE('',*,*,#117089,.F.); +#119831 = ORIENTED_EDGE('',*,*,#119816,.T.); +#119832 = ORIENTED_EDGE('',*,*,#119833,.T.); +#119833 = EDGE_CURVE('',#119809,#119834,#119836,.T.); +#119834 = VERTEX_POINT('',#119835); +#119835 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#119836 = LINE('',#119837,#119838); +#119837 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#119838 = VECTOR('',#119839,1.); +#119839 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119840 = ORIENTED_EDGE('',*,*,#119841,.T.); +#119841 = EDGE_CURVE('',#119834,#119842,#119844,.T.); +#119842 = VERTEX_POINT('',#119843); +#119843 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#119844 = LINE('',#119845,#119846); +#119845 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#119846 = VECTOR('',#119847,1.); +#119847 = DIRECTION('',(0.,-0.,1.)); +#119848 = ORIENTED_EDGE('',*,*,#119849,.F.); +#119849 = EDGE_CURVE('',#119850,#119842,#119852,.T.); +#119850 = VERTEX_POINT('',#119851); +#119851 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#119852 = LINE('',#119853,#119854); +#119853 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#119854 = VECTOR('',#119855,1.); +#119855 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119856 = ORIENTED_EDGE('',*,*,#119857,.F.); +#119857 = EDGE_CURVE('',#119858,#119850,#119860,.T.); +#119858 = VERTEX_POINT('',#119859); +#119859 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#119860 = LINE('',#119861,#119862); +#119861 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#119862 = VECTOR('',#119863,1.); +#119863 = DIRECTION('',(0.,-0.,1.)); +#119864 = ORIENTED_EDGE('',*,*,#119865,.T.); +#119865 = EDGE_CURVE('',#119858,#119866,#119868,.T.); +#119866 = VERTEX_POINT('',#119867); +#119867 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#119868 = LINE('',#119869,#119870); +#119869 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#119870 = VECTOR('',#119871,1.); +#119871 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119872 = ORIENTED_EDGE('',*,*,#119873,.F.); +#119873 = EDGE_CURVE('',#117082,#119866,#119874,.T.); +#119874 = LINE('',#119875,#119876); +#119875 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#119876 = VECTOR('',#119877,1.); +#119877 = DIRECTION('',(0.,-0.,-1.)); +#119878 = PLANE('',#119879); +#119879 = AXIS2_PLACEMENT_3D('',#119880,#119881,#119882); +#119880 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#119881 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119882 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119883 = ADVANCED_FACE('',(#119884),#119902,.F.); +#119884 = FACE_BOUND('',#119885,.F.); +#119885 = EDGE_LOOP('',(#119886,#119887,#119895,#119901)); +#119886 = ORIENTED_EDGE('',*,*,#119873,.T.); +#119887 = ORIENTED_EDGE('',*,*,#119888,.T.); +#119888 = EDGE_CURVE('',#119866,#119889,#119891,.T.); +#119889 = VERTEX_POINT('',#119890); +#119890 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#119891 = LINE('',#119892,#119893); +#119892 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#119893 = VECTOR('',#119894,1.); +#119894 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119895 = ORIENTED_EDGE('',*,*,#119896,.F.); +#119896 = EDGE_CURVE('',#117106,#119889,#119897,.T.); +#119897 = LINE('',#119898,#119899); +#119898 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#119899 = VECTOR('',#119900,1.); +#119900 = DIRECTION('',(0.,-0.,-1.)); +#119901 = ORIENTED_EDGE('',*,*,#117113,.F.); +#119902 = PLANE('',#119903); +#119903 = AXIS2_PLACEMENT_3D('',#119904,#119905,#119906); +#119904 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#119905 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119906 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119907 = ADVANCED_FACE('',(#119908),#119951,.F.); +#119908 = FACE_BOUND('',#119909,.F.); +#119909 = EDGE_LOOP('',(#119910,#119911,#119912,#119920,#119928,#119936, + #119944,#119950)); +#119910 = ORIENTED_EDGE('',*,*,#117130,.F.); +#119911 = ORIENTED_EDGE('',*,*,#119896,.T.); +#119912 = ORIENTED_EDGE('',*,*,#119913,.T.); +#119913 = EDGE_CURVE('',#119889,#119914,#119916,.T.); +#119914 = VERTEX_POINT('',#119915); +#119915 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#119916 = LINE('',#119917,#119918); +#119917 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#119918 = VECTOR('',#119919,1.); +#119919 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119920 = ORIENTED_EDGE('',*,*,#119921,.F.); +#119921 = EDGE_CURVE('',#119922,#119914,#119924,.T.); +#119922 = VERTEX_POINT('',#119923); +#119923 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#119924 = LINE('',#119925,#119926); +#119925 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#119926 = VECTOR('',#119927,1.); +#119927 = DIRECTION('',(-0.,0.,-1.)); +#119928 = ORIENTED_EDGE('',*,*,#119929,.T.); +#119929 = EDGE_CURVE('',#119922,#119930,#119932,.T.); +#119930 = VERTEX_POINT('',#119931); +#119931 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#119932 = LINE('',#119933,#119934); +#119933 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#119934 = VECTOR('',#119935,1.); +#119935 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119936 = ORIENTED_EDGE('',*,*,#119937,.T.); +#119937 = EDGE_CURVE('',#119930,#119938,#119940,.T.); +#119938 = VERTEX_POINT('',#119939); +#119939 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#119940 = LINE('',#119941,#119942); +#119941 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#119942 = VECTOR('',#119943,1.); +#119943 = DIRECTION('',(-0.,0.,-1.)); +#119944 = ORIENTED_EDGE('',*,*,#119945,.T.); +#119945 = EDGE_CURVE('',#119938,#119801,#119946,.T.); +#119946 = LINE('',#119947,#119948); +#119947 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#119948 = VECTOR('',#119949,1.); +#119949 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119950 = ORIENTED_EDGE('',*,*,#119800,.F.); +#119951 = PLANE('',#119952); +#119952 = AXIS2_PLACEMENT_3D('',#119953,#119954,#119955); +#119953 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#119954 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119955 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119956 = ADVANCED_FACE('',(#119957),#119982,.F.); +#119957 = FACE_BOUND('',#119958,.F.); +#119958 = EDGE_LOOP('',(#119959,#119967,#119975,#119981)); +#119959 = ORIENTED_EDGE('',*,*,#119960,.T.); +#119960 = EDGE_CURVE('',#117145,#119961,#119963,.T.); +#119961 = VERTEX_POINT('',#119962); +#119962 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#119963 = LINE('',#119964,#119965); +#119964 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#119965 = VECTOR('',#119966,1.); +#119966 = DIRECTION('',(0.,-0.,-1.)); +#119967 = ORIENTED_EDGE('',*,*,#119968,.T.); +#119968 = EDGE_CURVE('',#119961,#119969,#119971,.T.); +#119969 = VERTEX_POINT('',#119970); +#119970 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#119971 = LINE('',#119972,#119973); +#119972 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#119973 = VECTOR('',#119974,1.); +#119974 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119975 = ORIENTED_EDGE('',*,*,#119976,.F.); +#119976 = EDGE_CURVE('',#117154,#119969,#119977,.T.); +#119977 = LINE('',#119978,#119979); +#119978 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#119979 = VECTOR('',#119980,1.); +#119980 = DIRECTION('',(0.,-0.,-1.)); +#119981 = ORIENTED_EDGE('',*,*,#117161,.F.); +#119982 = PLANE('',#119983); +#119983 = AXIS2_PLACEMENT_3D('',#119984,#119985,#119986); +#119984 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#119985 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119986 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119987 = ADVANCED_FACE('',(#119988),#120038,.F.); +#119988 = FACE_BOUND('',#119989,.F.); +#119989 = EDGE_LOOP('',(#119990,#119991,#119992,#120000,#120008,#120016, + #120024,#120032)); +#119990 = ORIENTED_EDGE('',*,*,#117185,.F.); +#119991 = ORIENTED_EDGE('',*,*,#119976,.T.); +#119992 = ORIENTED_EDGE('',*,*,#119993,.T.); +#119993 = EDGE_CURVE('',#119969,#119994,#119996,.T.); +#119994 = VERTEX_POINT('',#119995); +#119995 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#119996 = LINE('',#119997,#119998); +#119997 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#119998 = VECTOR('',#119999,1.); +#119999 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120000 = ORIENTED_EDGE('',*,*,#120001,.T.); +#120001 = EDGE_CURVE('',#119994,#120002,#120004,.T.); +#120002 = VERTEX_POINT('',#120003); +#120003 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#120004 = LINE('',#120005,#120006); +#120005 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#120006 = VECTOR('',#120007,1.); +#120007 = DIRECTION('',(0.,-0.,1.)); +#120008 = ORIENTED_EDGE('',*,*,#120009,.F.); +#120009 = EDGE_CURVE('',#120010,#120002,#120012,.T.); +#120010 = VERTEX_POINT('',#120011); +#120011 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#120012 = LINE('',#120013,#120014); +#120013 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#120014 = VECTOR('',#120015,1.); +#120015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120016 = ORIENTED_EDGE('',*,*,#120017,.F.); +#120017 = EDGE_CURVE('',#120018,#120010,#120020,.T.); +#120018 = VERTEX_POINT('',#120019); +#120019 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#120020 = LINE('',#120021,#120022); +#120021 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#120022 = VECTOR('',#120023,1.); +#120023 = DIRECTION('',(0.,-0.,1.)); +#120024 = ORIENTED_EDGE('',*,*,#120025,.T.); +#120025 = EDGE_CURVE('',#120018,#120026,#120028,.T.); +#120026 = VERTEX_POINT('',#120027); +#120027 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#120028 = LINE('',#120029,#120030); +#120029 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#120030 = VECTOR('',#120031,1.); +#120031 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120032 = ORIENTED_EDGE('',*,*,#120033,.F.); +#120033 = EDGE_CURVE('',#117178,#120026,#120034,.T.); +#120034 = LINE('',#120035,#120036); +#120035 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#120036 = VECTOR('',#120037,1.); +#120037 = DIRECTION('',(0.,-0.,-1.)); +#120038 = PLANE('',#120039); +#120039 = AXIS2_PLACEMENT_3D('',#120040,#120041,#120042); +#120040 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#120041 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120042 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120043 = ADVANCED_FACE('',(#120044),#120062,.F.); +#120044 = FACE_BOUND('',#120045,.F.); +#120045 = EDGE_LOOP('',(#120046,#120047,#120055,#120061)); +#120046 = ORIENTED_EDGE('',*,*,#120033,.T.); +#120047 = ORIENTED_EDGE('',*,*,#120048,.T.); +#120048 = EDGE_CURVE('',#120026,#120049,#120051,.T.); +#120049 = VERTEX_POINT('',#120050); +#120050 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#120051 = LINE('',#120052,#120053); +#120052 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#120053 = VECTOR('',#120054,1.); +#120054 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120055 = ORIENTED_EDGE('',*,*,#120056,.F.); +#120056 = EDGE_CURVE('',#117202,#120049,#120057,.T.); +#120057 = LINE('',#120058,#120059); +#120058 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#120059 = VECTOR('',#120060,1.); +#120060 = DIRECTION('',(0.,-0.,-1.)); +#120061 = ORIENTED_EDGE('',*,*,#117209,.F.); +#120062 = PLANE('',#120063); +#120063 = AXIS2_PLACEMENT_3D('',#120064,#120065,#120066); +#120064 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#120065 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120066 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120067 = ADVANCED_FACE('',(#120068),#120111,.F.); +#120068 = FACE_BOUND('',#120069,.F.); +#120069 = EDGE_LOOP('',(#120070,#120071,#120072,#120080,#120088,#120096, + #120104,#120110)); +#120070 = ORIENTED_EDGE('',*,*,#117226,.F.); +#120071 = ORIENTED_EDGE('',*,*,#120056,.T.); +#120072 = ORIENTED_EDGE('',*,*,#120073,.T.); +#120073 = EDGE_CURVE('',#120049,#120074,#120076,.T.); +#120074 = VERTEX_POINT('',#120075); +#120075 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#120076 = LINE('',#120077,#120078); +#120077 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#120078 = VECTOR('',#120079,1.); +#120079 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120080 = ORIENTED_EDGE('',*,*,#120081,.F.); +#120081 = EDGE_CURVE('',#120082,#120074,#120084,.T.); +#120082 = VERTEX_POINT('',#120083); +#120083 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#120084 = LINE('',#120085,#120086); +#120085 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#120086 = VECTOR('',#120087,1.); +#120087 = DIRECTION('',(-0.,0.,-1.)); +#120088 = ORIENTED_EDGE('',*,*,#120089,.T.); +#120089 = EDGE_CURVE('',#120082,#120090,#120092,.T.); +#120090 = VERTEX_POINT('',#120091); +#120091 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#120092 = LINE('',#120093,#120094); +#120093 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#120094 = VECTOR('',#120095,1.); +#120095 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120096 = ORIENTED_EDGE('',*,*,#120097,.T.); +#120097 = EDGE_CURVE('',#120090,#120098,#120100,.T.); +#120098 = VERTEX_POINT('',#120099); +#120099 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#120100 = LINE('',#120101,#120102); +#120101 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#120102 = VECTOR('',#120103,1.); +#120103 = DIRECTION('',(-0.,0.,-1.)); +#120104 = ORIENTED_EDGE('',*,*,#120105,.T.); +#120105 = EDGE_CURVE('',#120098,#119961,#120106,.T.); +#120106 = LINE('',#120107,#120108); +#120107 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#120108 = VECTOR('',#120109,1.); +#120109 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120110 = ORIENTED_EDGE('',*,*,#119960,.F.); +#120111 = PLANE('',#120112); +#120112 = AXIS2_PLACEMENT_3D('',#120113,#120114,#120115); +#120113 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#120114 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120115 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120116 = ADVANCED_FACE('',(#120117),#120128,.T.); +#120117 = FACE_BOUND('',#120118,.T.); +#120118 = EDGE_LOOP('',(#120119,#120125,#120126,#120127)); +#120119 = ORIENTED_EDGE('',*,*,#120120,.T.); +#120120 = EDGE_CURVE('',#117322,#117258,#120121,.T.); +#120121 = LINE('',#120122,#120123); +#120122 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#120123 = VECTOR('',#120124,1.); +#120124 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120125 = ORIENTED_EDGE('',*,*,#117257,.T.); +#120126 = ORIENTED_EDGE('',*,*,#117242,.F.); +#120127 = ORIENTED_EDGE('',*,*,#117321,.F.); +#120128 = PLANE('',#120129); +#120129 = AXIS2_PLACEMENT_3D('',#120130,#120131,#120132); +#120130 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#120131 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120132 = DIRECTION('',(0.,0.,1.)); +#120133 = ADVANCED_FACE('',(#120134),#120145,.T.); +#120134 = FACE_BOUND('',#120135,.T.); +#120135 = EDGE_LOOP('',(#120136,#120142,#120143,#120144)); +#120136 = ORIENTED_EDGE('',*,*,#120137,.T.); +#120137 = EDGE_CURVE('',#117347,#117283,#120138,.T.); +#120138 = LINE('',#120139,#120140); +#120139 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#120140 = VECTOR('',#120141,1.); +#120141 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120142 = ORIENTED_EDGE('',*,*,#117290,.T.); +#120143 = ORIENTED_EDGE('',*,*,#120120,.F.); +#120144 = ORIENTED_EDGE('',*,*,#117354,.F.); +#120145 = PLANE('',#120146); +#120146 = AXIS2_PLACEMENT_3D('',#120147,#120148,#120149); +#120147 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#120148 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120149 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120150 = ADVANCED_FACE('',(#120151),#120162,.T.); +#120151 = FACE_BOUND('',#120152,.T.); +#120152 = EDGE_LOOP('',(#120153,#120159,#120160,#120161)); +#120153 = ORIENTED_EDGE('',*,*,#120154,.T.); +#120154 = EDGE_CURVE('',#117339,#117275,#120155,.T.); +#120155 = LINE('',#120156,#120157); +#120156 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#120157 = VECTOR('',#120158,1.); +#120158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120159 = ORIENTED_EDGE('',*,*,#117282,.T.); +#120160 = ORIENTED_EDGE('',*,*,#120137,.F.); +#120161 = ORIENTED_EDGE('',*,*,#117346,.T.); +#120162 = PLANE('',#120163); +#120163 = AXIS2_PLACEMENT_3D('',#120164,#120165,#120166); +#120164 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#120165 = DIRECTION('',(0.,-0.,-1.)); +#120166 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120167 = ADVANCED_FACE('',(#120168),#120179,.T.); +#120168 = FACE_BOUND('',#120169,.T.); +#120169 = EDGE_LOOP('',(#120170,#120176,#120177,#120178)); +#120170 = ORIENTED_EDGE('',*,*,#120171,.T.); +#120171 = EDGE_CURVE('',#117331,#117267,#120172,.T.); +#120172 = LINE('',#120173,#120174); +#120173 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#120174 = VECTOR('',#120175,1.); +#120175 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120176 = ORIENTED_EDGE('',*,*,#117274,.T.); +#120177 = ORIENTED_EDGE('',*,*,#120154,.F.); +#120178 = ORIENTED_EDGE('',*,*,#117338,.F.); +#120179 = PLANE('',#120180); +#120180 = AXIS2_PLACEMENT_3D('',#120181,#120182,#120183); +#120181 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#120182 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120183 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120184 = ADVANCED_FACE('',(#120185),#120191,.T.); +#120185 = FACE_BOUND('',#120186,.T.); +#120186 = EDGE_LOOP('',(#120187,#120188,#120189,#120190)); +#120187 = ORIENTED_EDGE('',*,*,#117304,.T.); +#120188 = ORIENTED_EDGE('',*,*,#117266,.T.); +#120189 = ORIENTED_EDGE('',*,*,#120171,.F.); +#120190 = ORIENTED_EDGE('',*,*,#117330,.F.); +#120191 = PLANE('',#120192); +#120192 = AXIS2_PLACEMENT_3D('',#120193,#120194,#120195); +#120193 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#120194 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120195 = DIRECTION('',(0.,0.,-1.)); +#120196 = ADVANCED_FACE('',(#120197),#120208,.T.); +#120197 = FACE_BOUND('',#120198,.T.); +#120198 = EDGE_LOOP('',(#120199,#120205,#120206,#120207)); +#120199 = ORIENTED_EDGE('',*,*,#120200,.T.); +#120200 = EDGE_CURVE('',#117450,#117386,#120201,.T.); +#120201 = LINE('',#120202,#120203); +#120202 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#120203 = VECTOR('',#120204,1.); +#120204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120205 = ORIENTED_EDGE('',*,*,#117385,.T.); +#120206 = ORIENTED_EDGE('',*,*,#117370,.F.); +#120207 = ORIENTED_EDGE('',*,*,#117449,.F.); +#120208 = PLANE('',#120209); +#120209 = AXIS2_PLACEMENT_3D('',#120210,#120211,#120212); +#120210 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#120211 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120212 = DIRECTION('',(0.,0.,1.)); +#120213 = ADVANCED_FACE('',(#120214),#120225,.T.); +#120214 = FACE_BOUND('',#120215,.T.); +#120215 = EDGE_LOOP('',(#120216,#120222,#120223,#120224)); +#120216 = ORIENTED_EDGE('',*,*,#120217,.T.); +#120217 = EDGE_CURVE('',#117475,#117411,#120218,.T.); +#120218 = LINE('',#120219,#120220); +#120219 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#120220 = VECTOR('',#120221,1.); +#120221 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120222 = ORIENTED_EDGE('',*,*,#117418,.T.); +#120223 = ORIENTED_EDGE('',*,*,#120200,.F.); +#120224 = ORIENTED_EDGE('',*,*,#117482,.F.); +#120225 = PLANE('',#120226); +#120226 = AXIS2_PLACEMENT_3D('',#120227,#120228,#120229); +#120227 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#120228 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120229 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120230 = ADVANCED_FACE('',(#120231),#120242,.T.); +#120231 = FACE_BOUND('',#120232,.T.); +#120232 = EDGE_LOOP('',(#120233,#120239,#120240,#120241)); +#120233 = ORIENTED_EDGE('',*,*,#120234,.T.); +#120234 = EDGE_CURVE('',#117467,#117403,#120235,.T.); +#120235 = LINE('',#120236,#120237); +#120236 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#120237 = VECTOR('',#120238,1.); +#120238 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120239 = ORIENTED_EDGE('',*,*,#117410,.T.); +#120240 = ORIENTED_EDGE('',*,*,#120217,.F.); +#120241 = ORIENTED_EDGE('',*,*,#117474,.T.); +#120242 = PLANE('',#120243); +#120243 = AXIS2_PLACEMENT_3D('',#120244,#120245,#120246); +#120244 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#120245 = DIRECTION('',(0.,-0.,-1.)); +#120246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120247 = ADVANCED_FACE('',(#120248),#120259,.T.); +#120248 = FACE_BOUND('',#120249,.T.); +#120249 = EDGE_LOOP('',(#120250,#120256,#120257,#120258)); +#120250 = ORIENTED_EDGE('',*,*,#120251,.T.); +#120251 = EDGE_CURVE('',#117459,#117395,#120252,.T.); +#120252 = LINE('',#120253,#120254); +#120253 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#120254 = VECTOR('',#120255,1.); +#120255 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120256 = ORIENTED_EDGE('',*,*,#117402,.T.); +#120257 = ORIENTED_EDGE('',*,*,#120234,.F.); +#120258 = ORIENTED_EDGE('',*,*,#117466,.F.); +#120259 = PLANE('',#120260); +#120260 = AXIS2_PLACEMENT_3D('',#120261,#120262,#120263); +#120261 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#120262 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120263 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120264 = ADVANCED_FACE('',(#120265),#120271,.T.); +#120265 = FACE_BOUND('',#120266,.T.); +#120266 = EDGE_LOOP('',(#120267,#120268,#120269,#120270)); +#120267 = ORIENTED_EDGE('',*,*,#117432,.T.); +#120268 = ORIENTED_EDGE('',*,*,#117394,.T.); +#120269 = ORIENTED_EDGE('',*,*,#120251,.F.); +#120270 = ORIENTED_EDGE('',*,*,#117458,.F.); +#120271 = PLANE('',#120272); +#120272 = AXIS2_PLACEMENT_3D('',#120273,#120274,#120275); +#120273 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#120274 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120275 = DIRECTION('',(0.,0.,-1.)); +#120276 = ADVANCED_FACE('',(#120277),#120288,.T.); +#120277 = FACE_BOUND('',#120278,.T.); +#120278 = EDGE_LOOP('',(#120279,#120285,#120286,#120287)); +#120279 = ORIENTED_EDGE('',*,*,#120280,.T.); +#120280 = EDGE_CURVE('',#117578,#117514,#120281,.T.); +#120281 = LINE('',#120282,#120283); +#120282 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#120283 = VECTOR('',#120284,1.); +#120284 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120285 = ORIENTED_EDGE('',*,*,#117513,.T.); +#120286 = ORIENTED_EDGE('',*,*,#117498,.F.); +#120287 = ORIENTED_EDGE('',*,*,#117577,.F.); +#120288 = PLANE('',#120289); +#120289 = AXIS2_PLACEMENT_3D('',#120290,#120291,#120292); +#120290 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#120291 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120292 = DIRECTION('',(0.,0.,1.)); +#120293 = ADVANCED_FACE('',(#120294),#120305,.T.); +#120294 = FACE_BOUND('',#120295,.T.); +#120295 = EDGE_LOOP('',(#120296,#120302,#120303,#120304)); +#120296 = ORIENTED_EDGE('',*,*,#120297,.T.); +#120297 = EDGE_CURVE('',#117603,#117539,#120298,.T.); +#120298 = LINE('',#120299,#120300); +#120299 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#120300 = VECTOR('',#120301,1.); +#120301 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120302 = ORIENTED_EDGE('',*,*,#117546,.T.); +#120303 = ORIENTED_EDGE('',*,*,#120280,.F.); +#120304 = ORIENTED_EDGE('',*,*,#117610,.F.); +#120305 = PLANE('',#120306); +#120306 = AXIS2_PLACEMENT_3D('',#120307,#120308,#120309); +#120307 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#120308 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120309 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120310 = ADVANCED_FACE('',(#120311),#120322,.T.); +#120311 = FACE_BOUND('',#120312,.T.); +#120312 = EDGE_LOOP('',(#120313,#120319,#120320,#120321)); +#120313 = ORIENTED_EDGE('',*,*,#120314,.T.); +#120314 = EDGE_CURVE('',#117595,#117531,#120315,.T.); +#120315 = LINE('',#120316,#120317); +#120316 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#120317 = VECTOR('',#120318,1.); +#120318 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120319 = ORIENTED_EDGE('',*,*,#117538,.T.); +#120320 = ORIENTED_EDGE('',*,*,#120297,.F.); +#120321 = ORIENTED_EDGE('',*,*,#117602,.T.); +#120322 = PLANE('',#120323); +#120323 = AXIS2_PLACEMENT_3D('',#120324,#120325,#120326); +#120324 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#120325 = DIRECTION('',(0.,-0.,-1.)); +#120326 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120327 = ADVANCED_FACE('',(#120328),#120339,.T.); +#120328 = FACE_BOUND('',#120329,.T.); +#120329 = EDGE_LOOP('',(#120330,#120336,#120337,#120338)); +#120330 = ORIENTED_EDGE('',*,*,#120331,.T.); +#120331 = EDGE_CURVE('',#117587,#117523,#120332,.T.); +#120332 = LINE('',#120333,#120334); +#120333 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#120334 = VECTOR('',#120335,1.); +#120335 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120336 = ORIENTED_EDGE('',*,*,#117530,.T.); +#120337 = ORIENTED_EDGE('',*,*,#120314,.F.); +#120338 = ORIENTED_EDGE('',*,*,#117594,.F.); +#120339 = PLANE('',#120340); +#120340 = AXIS2_PLACEMENT_3D('',#120341,#120342,#120343); +#120341 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#120342 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120343 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120344 = ADVANCED_FACE('',(#120345),#120351,.T.); +#120345 = FACE_BOUND('',#120346,.T.); +#120346 = EDGE_LOOP('',(#120347,#120348,#120349,#120350)); +#120347 = ORIENTED_EDGE('',*,*,#117560,.T.); +#120348 = ORIENTED_EDGE('',*,*,#117522,.T.); +#120349 = ORIENTED_EDGE('',*,*,#120331,.F.); +#120350 = ORIENTED_EDGE('',*,*,#117586,.F.); +#120351 = PLANE('',#120352); +#120352 = AXIS2_PLACEMENT_3D('',#120353,#120354,#120355); +#120353 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#120354 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120355 = DIRECTION('',(0.,0.,-1.)); +#120356 = ADVANCED_FACE('',(#120357),#120368,.T.); +#120357 = FACE_BOUND('',#120358,.T.); +#120358 = EDGE_LOOP('',(#120359,#120365,#120366,#120367)); +#120359 = ORIENTED_EDGE('',*,*,#120360,.T.); +#120360 = EDGE_CURVE('',#117706,#117642,#120361,.T.); +#120361 = LINE('',#120362,#120363); +#120362 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#120363 = VECTOR('',#120364,1.); +#120364 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120365 = ORIENTED_EDGE('',*,*,#117641,.T.); +#120366 = ORIENTED_EDGE('',*,*,#117626,.F.); +#120367 = ORIENTED_EDGE('',*,*,#117705,.F.); +#120368 = PLANE('',#120369); +#120369 = AXIS2_PLACEMENT_3D('',#120370,#120371,#120372); +#120370 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#120371 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120372 = DIRECTION('',(0.,0.,1.)); +#120373 = ADVANCED_FACE('',(#120374),#120385,.T.); +#120374 = FACE_BOUND('',#120375,.T.); +#120375 = EDGE_LOOP('',(#120376,#120382,#120383,#120384)); +#120376 = ORIENTED_EDGE('',*,*,#120377,.T.); +#120377 = EDGE_CURVE('',#117731,#117667,#120378,.T.); +#120378 = LINE('',#120379,#120380); +#120379 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#120380 = VECTOR('',#120381,1.); +#120381 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120382 = ORIENTED_EDGE('',*,*,#117674,.T.); +#120383 = ORIENTED_EDGE('',*,*,#120360,.F.); +#120384 = ORIENTED_EDGE('',*,*,#117738,.F.); +#120385 = PLANE('',#120386); +#120386 = AXIS2_PLACEMENT_3D('',#120387,#120388,#120389); +#120387 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#120388 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120389 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120390 = ADVANCED_FACE('',(#120391),#120402,.T.); +#120391 = FACE_BOUND('',#120392,.T.); +#120392 = EDGE_LOOP('',(#120393,#120399,#120400,#120401)); +#120393 = ORIENTED_EDGE('',*,*,#120394,.T.); +#120394 = EDGE_CURVE('',#117723,#117659,#120395,.T.); +#120395 = LINE('',#120396,#120397); +#120396 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#120397 = VECTOR('',#120398,1.); +#120398 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120399 = ORIENTED_EDGE('',*,*,#117666,.T.); +#120400 = ORIENTED_EDGE('',*,*,#120377,.F.); +#120401 = ORIENTED_EDGE('',*,*,#117730,.T.); +#120402 = PLANE('',#120403); +#120403 = AXIS2_PLACEMENT_3D('',#120404,#120405,#120406); +#120404 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#120405 = DIRECTION('',(0.,-0.,-1.)); +#120406 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120407 = ADVANCED_FACE('',(#120408),#120419,.T.); +#120408 = FACE_BOUND('',#120409,.T.); +#120409 = EDGE_LOOP('',(#120410,#120416,#120417,#120418)); +#120410 = ORIENTED_EDGE('',*,*,#120411,.T.); +#120411 = EDGE_CURVE('',#117715,#117651,#120412,.T.); +#120412 = LINE('',#120413,#120414); +#120413 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#120414 = VECTOR('',#120415,1.); +#120415 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120416 = ORIENTED_EDGE('',*,*,#117658,.T.); +#120417 = ORIENTED_EDGE('',*,*,#120394,.F.); +#120418 = ORIENTED_EDGE('',*,*,#117722,.F.); +#120419 = PLANE('',#120420); +#120420 = AXIS2_PLACEMENT_3D('',#120421,#120422,#120423); +#120421 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#120422 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120423 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120424 = ADVANCED_FACE('',(#120425),#120431,.T.); +#120425 = FACE_BOUND('',#120426,.T.); +#120426 = EDGE_LOOP('',(#120427,#120428,#120429,#120430)); +#120427 = ORIENTED_EDGE('',*,*,#117688,.T.); +#120428 = ORIENTED_EDGE('',*,*,#117650,.T.); +#120429 = ORIENTED_EDGE('',*,*,#120411,.F.); +#120430 = ORIENTED_EDGE('',*,*,#117714,.F.); +#120431 = PLANE('',#120432); +#120432 = AXIS2_PLACEMENT_3D('',#120433,#120434,#120435); +#120433 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#120434 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120435 = DIRECTION('',(0.,0.,-1.)); +#120436 = ADVANCED_FACE('',(#120437),#120448,.T.); +#120437 = FACE_BOUND('',#120438,.T.); +#120438 = EDGE_LOOP('',(#120439,#120445,#120446,#120447)); +#120439 = ORIENTED_EDGE('',*,*,#120440,.T.); +#120440 = EDGE_CURVE('',#117834,#117770,#120441,.T.); +#120441 = LINE('',#120442,#120443); +#120442 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#120443 = VECTOR('',#120444,1.); +#120444 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120445 = ORIENTED_EDGE('',*,*,#117769,.T.); +#120446 = ORIENTED_EDGE('',*,*,#117754,.F.); +#120447 = ORIENTED_EDGE('',*,*,#117833,.F.); +#120448 = PLANE('',#120449); +#120449 = AXIS2_PLACEMENT_3D('',#120450,#120451,#120452); +#120450 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#120451 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120452 = DIRECTION('',(0.,0.,1.)); +#120453 = ADVANCED_FACE('',(#120454),#120465,.T.); +#120454 = FACE_BOUND('',#120455,.T.); +#120455 = EDGE_LOOP('',(#120456,#120462,#120463,#120464)); +#120456 = ORIENTED_EDGE('',*,*,#120457,.T.); +#120457 = EDGE_CURVE('',#117859,#117795,#120458,.T.); +#120458 = LINE('',#120459,#120460); +#120459 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#120460 = VECTOR('',#120461,1.); +#120461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120462 = ORIENTED_EDGE('',*,*,#117802,.T.); +#120463 = ORIENTED_EDGE('',*,*,#120440,.F.); +#120464 = ORIENTED_EDGE('',*,*,#117866,.F.); +#120465 = PLANE('',#120466); +#120466 = AXIS2_PLACEMENT_3D('',#120467,#120468,#120469); +#120467 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#120468 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120469 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120470 = ADVANCED_FACE('',(#120471),#120482,.T.); +#120471 = FACE_BOUND('',#120472,.T.); +#120472 = EDGE_LOOP('',(#120473,#120479,#120480,#120481)); +#120473 = ORIENTED_EDGE('',*,*,#120474,.T.); +#120474 = EDGE_CURVE('',#117851,#117787,#120475,.T.); +#120475 = LINE('',#120476,#120477); +#120476 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#120477 = VECTOR('',#120478,1.); +#120478 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120479 = ORIENTED_EDGE('',*,*,#117794,.T.); +#120480 = ORIENTED_EDGE('',*,*,#120457,.F.); +#120481 = ORIENTED_EDGE('',*,*,#117858,.T.); +#120482 = PLANE('',#120483); +#120483 = AXIS2_PLACEMENT_3D('',#120484,#120485,#120486); +#120484 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#120485 = DIRECTION('',(0.,-0.,-1.)); +#120486 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120487 = ADVANCED_FACE('',(#120488),#120499,.T.); +#120488 = FACE_BOUND('',#120489,.T.); +#120489 = EDGE_LOOP('',(#120490,#120496,#120497,#120498)); +#120490 = ORIENTED_EDGE('',*,*,#120491,.T.); +#120491 = EDGE_CURVE('',#117843,#117779,#120492,.T.); +#120492 = LINE('',#120493,#120494); +#120493 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#120494 = VECTOR('',#120495,1.); +#120495 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120496 = ORIENTED_EDGE('',*,*,#117786,.T.); +#120497 = ORIENTED_EDGE('',*,*,#120474,.F.); +#120498 = ORIENTED_EDGE('',*,*,#117850,.F.); +#120499 = PLANE('',#120500); +#120500 = AXIS2_PLACEMENT_3D('',#120501,#120502,#120503); +#120501 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#120502 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120503 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120504 = ADVANCED_FACE('',(#120505),#120511,.T.); +#120505 = FACE_BOUND('',#120506,.T.); +#120506 = EDGE_LOOP('',(#120507,#120508,#120509,#120510)); +#120507 = ORIENTED_EDGE('',*,*,#117816,.T.); +#120508 = ORIENTED_EDGE('',*,*,#117778,.T.); +#120509 = ORIENTED_EDGE('',*,*,#120491,.F.); +#120510 = ORIENTED_EDGE('',*,*,#117842,.F.); +#120511 = PLANE('',#120512); +#120512 = AXIS2_PLACEMENT_3D('',#120513,#120514,#120515); +#120513 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#120514 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120515 = DIRECTION('',(0.,0.,-1.)); +#120516 = ADVANCED_FACE('',(#120517),#120528,.T.); +#120517 = FACE_BOUND('',#120518,.T.); +#120518 = EDGE_LOOP('',(#120519,#120525,#120526,#120527)); +#120519 = ORIENTED_EDGE('',*,*,#120520,.T.); +#120520 = EDGE_CURVE('',#117962,#117898,#120521,.T.); +#120521 = LINE('',#120522,#120523); +#120522 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#120523 = VECTOR('',#120524,1.); +#120524 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120525 = ORIENTED_EDGE('',*,*,#117897,.T.); +#120526 = ORIENTED_EDGE('',*,*,#117882,.F.); +#120527 = ORIENTED_EDGE('',*,*,#117961,.F.); +#120528 = PLANE('',#120529); +#120529 = AXIS2_PLACEMENT_3D('',#120530,#120531,#120532); +#120530 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#120531 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120532 = DIRECTION('',(0.,0.,1.)); +#120533 = ADVANCED_FACE('',(#120534),#120545,.T.); +#120534 = FACE_BOUND('',#120535,.T.); +#120535 = EDGE_LOOP('',(#120536,#120542,#120543,#120544)); +#120536 = ORIENTED_EDGE('',*,*,#120537,.T.); +#120537 = EDGE_CURVE('',#117987,#117923,#120538,.T.); +#120538 = LINE('',#120539,#120540); +#120539 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#120540 = VECTOR('',#120541,1.); +#120541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120542 = ORIENTED_EDGE('',*,*,#117930,.T.); +#120543 = ORIENTED_EDGE('',*,*,#120520,.F.); +#120544 = ORIENTED_EDGE('',*,*,#117994,.F.); +#120545 = PLANE('',#120546); +#120546 = AXIS2_PLACEMENT_3D('',#120547,#120548,#120549); +#120547 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#120548 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120549 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120550 = ADVANCED_FACE('',(#120551),#120562,.T.); +#120551 = FACE_BOUND('',#120552,.T.); +#120552 = EDGE_LOOP('',(#120553,#120559,#120560,#120561)); +#120553 = ORIENTED_EDGE('',*,*,#120554,.T.); +#120554 = EDGE_CURVE('',#117979,#117915,#120555,.T.); +#120555 = LINE('',#120556,#120557); +#120556 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#120557 = VECTOR('',#120558,1.); +#120558 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120559 = ORIENTED_EDGE('',*,*,#117922,.T.); +#120560 = ORIENTED_EDGE('',*,*,#120537,.F.); +#120561 = ORIENTED_EDGE('',*,*,#117986,.T.); +#120562 = PLANE('',#120563); +#120563 = AXIS2_PLACEMENT_3D('',#120564,#120565,#120566); +#120564 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#120565 = DIRECTION('',(0.,-0.,-1.)); +#120566 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120567 = ADVANCED_FACE('',(#120568),#120579,.T.); +#120568 = FACE_BOUND('',#120569,.T.); +#120569 = EDGE_LOOP('',(#120570,#120576,#120577,#120578)); +#120570 = ORIENTED_EDGE('',*,*,#120571,.T.); +#120571 = EDGE_CURVE('',#117971,#117907,#120572,.T.); +#120572 = LINE('',#120573,#120574); +#120573 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#120574 = VECTOR('',#120575,1.); +#120575 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120576 = ORIENTED_EDGE('',*,*,#117914,.T.); +#120577 = ORIENTED_EDGE('',*,*,#120554,.F.); +#120578 = ORIENTED_EDGE('',*,*,#117978,.F.); +#120579 = PLANE('',#120580); +#120580 = AXIS2_PLACEMENT_3D('',#120581,#120582,#120583); +#120581 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#120582 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120583 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120584 = ADVANCED_FACE('',(#120585),#120591,.T.); +#120585 = FACE_BOUND('',#120586,.T.); +#120586 = EDGE_LOOP('',(#120587,#120588,#120589,#120590)); +#120587 = ORIENTED_EDGE('',*,*,#117944,.T.); +#120588 = ORIENTED_EDGE('',*,*,#117906,.T.); +#120589 = ORIENTED_EDGE('',*,*,#120571,.F.); +#120590 = ORIENTED_EDGE('',*,*,#117970,.F.); +#120591 = PLANE('',#120592); +#120592 = AXIS2_PLACEMENT_3D('',#120593,#120594,#120595); +#120593 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#120594 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120595 = DIRECTION('',(0.,0.,-1.)); +#120596 = ADVANCED_FACE('',(#120597),#120608,.T.); +#120597 = FACE_BOUND('',#120598,.T.); +#120598 = EDGE_LOOP('',(#120599,#120605,#120606,#120607)); +#120599 = ORIENTED_EDGE('',*,*,#120600,.T.); +#120600 = EDGE_CURVE('',#118090,#118026,#120601,.T.); +#120601 = LINE('',#120602,#120603); +#120602 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#120603 = VECTOR('',#120604,1.); +#120604 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120605 = ORIENTED_EDGE('',*,*,#118025,.T.); +#120606 = ORIENTED_EDGE('',*,*,#118010,.F.); +#120607 = ORIENTED_EDGE('',*,*,#118089,.F.); +#120608 = PLANE('',#120609); +#120609 = AXIS2_PLACEMENT_3D('',#120610,#120611,#120612); +#120610 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#120611 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120612 = DIRECTION('',(0.,0.,1.)); +#120613 = ADVANCED_FACE('',(#120614),#120625,.T.); +#120614 = FACE_BOUND('',#120615,.T.); +#120615 = EDGE_LOOP('',(#120616,#120622,#120623,#120624)); +#120616 = ORIENTED_EDGE('',*,*,#120617,.T.); +#120617 = EDGE_CURVE('',#118115,#118051,#120618,.T.); +#120618 = LINE('',#120619,#120620); +#120619 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#120620 = VECTOR('',#120621,1.); +#120621 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120622 = ORIENTED_EDGE('',*,*,#118058,.T.); +#120623 = ORIENTED_EDGE('',*,*,#120600,.F.); +#120624 = ORIENTED_EDGE('',*,*,#118122,.F.); +#120625 = PLANE('',#120626); +#120626 = AXIS2_PLACEMENT_3D('',#120627,#120628,#120629); +#120627 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#120628 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120629 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120630 = ADVANCED_FACE('',(#120631),#120642,.T.); +#120631 = FACE_BOUND('',#120632,.T.); +#120632 = EDGE_LOOP('',(#120633,#120639,#120640,#120641)); +#120633 = ORIENTED_EDGE('',*,*,#120634,.T.); +#120634 = EDGE_CURVE('',#118107,#118043,#120635,.T.); +#120635 = LINE('',#120636,#120637); +#120636 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#120637 = VECTOR('',#120638,1.); +#120638 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120639 = ORIENTED_EDGE('',*,*,#118050,.T.); +#120640 = ORIENTED_EDGE('',*,*,#120617,.F.); +#120641 = ORIENTED_EDGE('',*,*,#118114,.T.); +#120642 = PLANE('',#120643); +#120643 = AXIS2_PLACEMENT_3D('',#120644,#120645,#120646); +#120644 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#120645 = DIRECTION('',(0.,-0.,-1.)); +#120646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120647 = ADVANCED_FACE('',(#120648),#120659,.T.); +#120648 = FACE_BOUND('',#120649,.T.); +#120649 = EDGE_LOOP('',(#120650,#120656,#120657,#120658)); +#120650 = ORIENTED_EDGE('',*,*,#120651,.T.); +#120651 = EDGE_CURVE('',#118099,#118035,#120652,.T.); +#120652 = LINE('',#120653,#120654); +#120653 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#120654 = VECTOR('',#120655,1.); +#120655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120656 = ORIENTED_EDGE('',*,*,#118042,.T.); +#120657 = ORIENTED_EDGE('',*,*,#120634,.F.); +#120658 = ORIENTED_EDGE('',*,*,#118106,.F.); +#120659 = PLANE('',#120660); +#120660 = AXIS2_PLACEMENT_3D('',#120661,#120662,#120663); +#120661 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#120662 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120663 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120664 = ADVANCED_FACE('',(#120665),#120671,.T.); +#120665 = FACE_BOUND('',#120666,.T.); +#120666 = EDGE_LOOP('',(#120667,#120668,#120669,#120670)); +#120667 = ORIENTED_EDGE('',*,*,#118072,.T.); +#120668 = ORIENTED_EDGE('',*,*,#118034,.T.); +#120669 = ORIENTED_EDGE('',*,*,#120651,.F.); +#120670 = ORIENTED_EDGE('',*,*,#118098,.F.); +#120671 = PLANE('',#120672); +#120672 = AXIS2_PLACEMENT_3D('',#120673,#120674,#120675); +#120673 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#120674 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120675 = DIRECTION('',(0.,0.,-1.)); +#120676 = ADVANCED_FACE('',(#120677),#120688,.T.); +#120677 = FACE_BOUND('',#120678,.T.); +#120678 = EDGE_LOOP('',(#120679,#120685,#120686,#120687)); +#120679 = ORIENTED_EDGE('',*,*,#120680,.T.); +#120680 = EDGE_CURVE('',#118218,#118154,#120681,.T.); +#120681 = LINE('',#120682,#120683); +#120682 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#120683 = VECTOR('',#120684,1.); +#120684 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120685 = ORIENTED_EDGE('',*,*,#118153,.T.); +#120686 = ORIENTED_EDGE('',*,*,#118138,.F.); +#120687 = ORIENTED_EDGE('',*,*,#118217,.F.); +#120688 = PLANE('',#120689); +#120689 = AXIS2_PLACEMENT_3D('',#120690,#120691,#120692); +#120690 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#120691 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120692 = DIRECTION('',(0.,0.,1.)); +#120693 = ADVANCED_FACE('',(#120694),#120705,.T.); +#120694 = FACE_BOUND('',#120695,.T.); +#120695 = EDGE_LOOP('',(#120696,#120702,#120703,#120704)); +#120696 = ORIENTED_EDGE('',*,*,#120697,.T.); +#120697 = EDGE_CURVE('',#118243,#118179,#120698,.T.); +#120698 = LINE('',#120699,#120700); +#120699 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#120700 = VECTOR('',#120701,1.); +#120701 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120702 = ORIENTED_EDGE('',*,*,#118186,.T.); +#120703 = ORIENTED_EDGE('',*,*,#120680,.F.); +#120704 = ORIENTED_EDGE('',*,*,#118250,.F.); +#120705 = PLANE('',#120706); +#120706 = AXIS2_PLACEMENT_3D('',#120707,#120708,#120709); +#120707 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#120708 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120709 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120710 = ADVANCED_FACE('',(#120711),#120722,.T.); +#120711 = FACE_BOUND('',#120712,.T.); +#120712 = EDGE_LOOP('',(#120713,#120719,#120720,#120721)); +#120713 = ORIENTED_EDGE('',*,*,#120714,.T.); +#120714 = EDGE_CURVE('',#118235,#118171,#120715,.T.); +#120715 = LINE('',#120716,#120717); +#120716 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#120717 = VECTOR('',#120718,1.); +#120718 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120719 = ORIENTED_EDGE('',*,*,#118178,.T.); +#120720 = ORIENTED_EDGE('',*,*,#120697,.F.); +#120721 = ORIENTED_EDGE('',*,*,#118242,.T.); +#120722 = PLANE('',#120723); +#120723 = AXIS2_PLACEMENT_3D('',#120724,#120725,#120726); +#120724 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#120725 = DIRECTION('',(0.,-0.,-1.)); +#120726 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120727 = ADVANCED_FACE('',(#120728),#120739,.T.); +#120728 = FACE_BOUND('',#120729,.T.); +#120729 = EDGE_LOOP('',(#120730,#120736,#120737,#120738)); +#120730 = ORIENTED_EDGE('',*,*,#120731,.T.); +#120731 = EDGE_CURVE('',#118227,#118163,#120732,.T.); +#120732 = LINE('',#120733,#120734); +#120733 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#120734 = VECTOR('',#120735,1.); +#120735 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120736 = ORIENTED_EDGE('',*,*,#118170,.T.); +#120737 = ORIENTED_EDGE('',*,*,#120714,.F.); +#120738 = ORIENTED_EDGE('',*,*,#118234,.F.); +#120739 = PLANE('',#120740); +#120740 = AXIS2_PLACEMENT_3D('',#120741,#120742,#120743); +#120741 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#120742 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120743 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120744 = ADVANCED_FACE('',(#120745),#120751,.T.); +#120745 = FACE_BOUND('',#120746,.T.); +#120746 = EDGE_LOOP('',(#120747,#120748,#120749,#120750)); +#120747 = ORIENTED_EDGE('',*,*,#118200,.T.); +#120748 = ORIENTED_EDGE('',*,*,#118162,.T.); +#120749 = ORIENTED_EDGE('',*,*,#120731,.F.); +#120750 = ORIENTED_EDGE('',*,*,#118226,.F.); +#120751 = PLANE('',#120752); +#120752 = AXIS2_PLACEMENT_3D('',#120753,#120754,#120755); +#120753 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#120754 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120755 = DIRECTION('',(0.,0.,-1.)); +#120756 = ADVANCED_FACE('',(#120757),#120768,.T.); +#120757 = FACE_BOUND('',#120758,.T.); +#120758 = EDGE_LOOP('',(#120759,#120765,#120766,#120767)); +#120759 = ORIENTED_EDGE('',*,*,#120760,.T.); +#120760 = EDGE_CURVE('',#118346,#118282,#120761,.T.); +#120761 = LINE('',#120762,#120763); +#120762 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#120763 = VECTOR('',#120764,1.); +#120764 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120765 = ORIENTED_EDGE('',*,*,#118281,.T.); +#120766 = ORIENTED_EDGE('',*,*,#118266,.F.); +#120767 = ORIENTED_EDGE('',*,*,#118345,.F.); +#120768 = PLANE('',#120769); +#120769 = AXIS2_PLACEMENT_3D('',#120770,#120771,#120772); +#120770 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#120771 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120772 = DIRECTION('',(0.,0.,1.)); +#120773 = ADVANCED_FACE('',(#120774),#120785,.T.); +#120774 = FACE_BOUND('',#120775,.T.); +#120775 = EDGE_LOOP('',(#120776,#120782,#120783,#120784)); +#120776 = ORIENTED_EDGE('',*,*,#120777,.T.); +#120777 = EDGE_CURVE('',#118371,#118307,#120778,.T.); +#120778 = LINE('',#120779,#120780); +#120779 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#120780 = VECTOR('',#120781,1.); +#120781 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120782 = ORIENTED_EDGE('',*,*,#118314,.T.); +#120783 = ORIENTED_EDGE('',*,*,#120760,.F.); +#120784 = ORIENTED_EDGE('',*,*,#118378,.F.); +#120785 = PLANE('',#120786); +#120786 = AXIS2_PLACEMENT_3D('',#120787,#120788,#120789); +#120787 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#120788 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120789 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120790 = ADVANCED_FACE('',(#120791),#120802,.T.); +#120791 = FACE_BOUND('',#120792,.T.); +#120792 = EDGE_LOOP('',(#120793,#120799,#120800,#120801)); +#120793 = ORIENTED_EDGE('',*,*,#120794,.T.); +#120794 = EDGE_CURVE('',#118363,#118299,#120795,.T.); +#120795 = LINE('',#120796,#120797); +#120796 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#120797 = VECTOR('',#120798,1.); +#120798 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120799 = ORIENTED_EDGE('',*,*,#118306,.T.); +#120800 = ORIENTED_EDGE('',*,*,#120777,.F.); +#120801 = ORIENTED_EDGE('',*,*,#118370,.T.); +#120802 = PLANE('',#120803); +#120803 = AXIS2_PLACEMENT_3D('',#120804,#120805,#120806); +#120804 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#120805 = DIRECTION('',(0.,-0.,-1.)); +#120806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120807 = ADVANCED_FACE('',(#120808),#120819,.T.); +#120808 = FACE_BOUND('',#120809,.T.); +#120809 = EDGE_LOOP('',(#120810,#120816,#120817,#120818)); +#120810 = ORIENTED_EDGE('',*,*,#120811,.T.); +#120811 = EDGE_CURVE('',#118355,#118291,#120812,.T.); +#120812 = LINE('',#120813,#120814); +#120813 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#120814 = VECTOR('',#120815,1.); +#120815 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120816 = ORIENTED_EDGE('',*,*,#118298,.T.); +#120817 = ORIENTED_EDGE('',*,*,#120794,.F.); +#120818 = ORIENTED_EDGE('',*,*,#118362,.F.); +#120819 = PLANE('',#120820); +#120820 = AXIS2_PLACEMENT_3D('',#120821,#120822,#120823); +#120821 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#120822 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120823 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120824 = ADVANCED_FACE('',(#120825),#120831,.T.); +#120825 = FACE_BOUND('',#120826,.T.); +#120826 = EDGE_LOOP('',(#120827,#120828,#120829,#120830)); +#120827 = ORIENTED_EDGE('',*,*,#118328,.T.); +#120828 = ORIENTED_EDGE('',*,*,#118290,.T.); +#120829 = ORIENTED_EDGE('',*,*,#120811,.F.); +#120830 = ORIENTED_EDGE('',*,*,#118354,.F.); +#120831 = PLANE('',#120832); +#120832 = AXIS2_PLACEMENT_3D('',#120833,#120834,#120835); +#120833 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#120834 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120835 = DIRECTION('',(0.,0.,-1.)); +#120836 = ADVANCED_FACE('',(#120837),#120848,.T.); +#120837 = FACE_BOUND('',#120838,.T.); +#120838 = EDGE_LOOP('',(#120839,#120845,#120846,#120847)); +#120839 = ORIENTED_EDGE('',*,*,#120840,.T.); +#120840 = EDGE_CURVE('',#118474,#118410,#120841,.T.); +#120841 = LINE('',#120842,#120843); +#120842 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#120843 = VECTOR('',#120844,1.); +#120844 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120845 = ORIENTED_EDGE('',*,*,#118409,.T.); +#120846 = ORIENTED_EDGE('',*,*,#118394,.F.); +#120847 = ORIENTED_EDGE('',*,*,#118473,.F.); +#120848 = PLANE('',#120849); +#120849 = AXIS2_PLACEMENT_3D('',#120850,#120851,#120852); +#120850 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#120851 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120852 = DIRECTION('',(0.,0.,1.)); +#120853 = ADVANCED_FACE('',(#120854),#120865,.T.); +#120854 = FACE_BOUND('',#120855,.T.); +#120855 = EDGE_LOOP('',(#120856,#120862,#120863,#120864)); +#120856 = ORIENTED_EDGE('',*,*,#120857,.T.); +#120857 = EDGE_CURVE('',#118499,#118435,#120858,.T.); +#120858 = LINE('',#120859,#120860); +#120859 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#120860 = VECTOR('',#120861,1.); +#120861 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120862 = ORIENTED_EDGE('',*,*,#118442,.T.); +#120863 = ORIENTED_EDGE('',*,*,#120840,.F.); +#120864 = ORIENTED_EDGE('',*,*,#118506,.F.); +#120865 = PLANE('',#120866); +#120866 = AXIS2_PLACEMENT_3D('',#120867,#120868,#120869); +#120867 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#120868 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120869 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120870 = ADVANCED_FACE('',(#120871),#120882,.T.); +#120871 = FACE_BOUND('',#120872,.T.); +#120872 = EDGE_LOOP('',(#120873,#120879,#120880,#120881)); +#120873 = ORIENTED_EDGE('',*,*,#120874,.T.); +#120874 = EDGE_CURVE('',#118491,#118427,#120875,.T.); +#120875 = LINE('',#120876,#120877); +#120876 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#120877 = VECTOR('',#120878,1.); +#120878 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120879 = ORIENTED_EDGE('',*,*,#118434,.T.); +#120880 = ORIENTED_EDGE('',*,*,#120857,.F.); +#120881 = ORIENTED_EDGE('',*,*,#118498,.T.); +#120882 = PLANE('',#120883); +#120883 = AXIS2_PLACEMENT_3D('',#120884,#120885,#120886); +#120884 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#120885 = DIRECTION('',(0.,-0.,-1.)); +#120886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120887 = ADVANCED_FACE('',(#120888),#120899,.T.); +#120888 = FACE_BOUND('',#120889,.T.); +#120889 = EDGE_LOOP('',(#120890,#120896,#120897,#120898)); +#120890 = ORIENTED_EDGE('',*,*,#120891,.T.); +#120891 = EDGE_CURVE('',#118483,#118419,#120892,.T.); +#120892 = LINE('',#120893,#120894); +#120893 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#120894 = VECTOR('',#120895,1.); +#120895 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120896 = ORIENTED_EDGE('',*,*,#118426,.T.); +#120897 = ORIENTED_EDGE('',*,*,#120874,.F.); +#120898 = ORIENTED_EDGE('',*,*,#118490,.F.); +#120899 = PLANE('',#120900); +#120900 = AXIS2_PLACEMENT_3D('',#120901,#120902,#120903); +#120901 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#120902 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120903 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120904 = ADVANCED_FACE('',(#120905),#120911,.T.); +#120905 = FACE_BOUND('',#120906,.T.); +#120906 = EDGE_LOOP('',(#120907,#120908,#120909,#120910)); +#120907 = ORIENTED_EDGE('',*,*,#118456,.T.); +#120908 = ORIENTED_EDGE('',*,*,#118418,.T.); +#120909 = ORIENTED_EDGE('',*,*,#120891,.F.); +#120910 = ORIENTED_EDGE('',*,*,#118482,.F.); +#120911 = PLANE('',#120912); +#120912 = AXIS2_PLACEMENT_3D('',#120913,#120914,#120915); +#120913 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#120914 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120915 = DIRECTION('',(0.,0.,-1.)); +#120916 = ADVANCED_FACE('',(#120917),#120928,.T.); +#120917 = FACE_BOUND('',#120918,.T.); +#120918 = EDGE_LOOP('',(#120919,#120920,#120921,#120922)); +#120919 = ORIENTED_EDGE('',*,*,#118665,.T.); +#120920 = ORIENTED_EDGE('',*,*,#118528,.T.); +#120921 = ORIENTED_EDGE('',*,*,#118553,.T.); +#120922 = ORIENTED_EDGE('',*,*,#120923,.T.); +#120923 = EDGE_CURVE('',#118554,#118658,#120924,.T.); +#120924 = LINE('',#120925,#120926); +#120925 = CARTESIAN_POINT('',(0.1,-22.86,0.9)); +#120926 = VECTOR('',#120927,1.); +#120927 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120928 = PLANE('',#120929); +#120929 = AXIS2_PLACEMENT_3D('',#120930,#120931,#120932); +#120930 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#120931 = DIRECTION('',(0.,0.,1.)); +#120932 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#120933 = ADVANCED_FACE('',(#120934),#120945,.T.); +#120934 = FACE_BOUND('',#120935,.T.); +#120935 = EDGE_LOOP('',(#120936,#120937,#120943,#120944)); +#120936 = ORIENTED_EDGE('',*,*,#118633,.T.); +#120937 = ORIENTED_EDGE('',*,*,#120938,.F.); +#120938 = EDGE_CURVE('',#118578,#118634,#120939,.T.); +#120939 = LINE('',#120940,#120941); +#120940 = CARTESIAN_POINT('',(-0.1,-22.86,0.9)); +#120941 = VECTOR('',#120942,1.); +#120942 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120943 = ORIENTED_EDGE('',*,*,#118585,.T.); +#120944 = ORIENTED_EDGE('',*,*,#118608,.T.); +#120945 = PLANE('',#120946); +#120946 = AXIS2_PLACEMENT_3D('',#120947,#120948,#120949); +#120947 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#120948 = DIRECTION('',(0.,0.,1.)); +#120949 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#120950 = ADVANCED_FACE('',(#120951),#120994,.T.); +#120951 = FACE_BOUND('',#120952,.T.); +#120952 = EDGE_LOOP('',(#120953,#120954,#120962,#120970,#120978,#120986, + #120992,#120993)); +#120953 = ORIENTED_EDGE('',*,*,#118641,.F.); +#120954 = ORIENTED_EDGE('',*,*,#120955,.T.); +#120955 = EDGE_CURVE('',#118642,#120956,#120958,.T.); +#120956 = VERTEX_POINT('',#120957); +#120957 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#120958 = LINE('',#120959,#120960); +#120959 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#120960 = VECTOR('',#120961,1.); +#120961 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#120962 = ORIENTED_EDGE('',*,*,#120963,.T.); +#120963 = EDGE_CURVE('',#120956,#120964,#120966,.T.); +#120964 = VERTEX_POINT('',#120965); +#120965 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#120966 = LINE('',#120967,#120968); +#120967 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#120968 = VECTOR('',#120969,1.); +#120969 = DIRECTION('',(0.,0.,-1.)); +#120970 = ORIENTED_EDGE('',*,*,#120971,.T.); +#120971 = EDGE_CURVE('',#120964,#120972,#120974,.T.); +#120972 = VERTEX_POINT('',#120973); +#120973 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#120974 = LINE('',#120975,#120976); +#120975 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#120976 = VECTOR('',#120977,1.); +#120977 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120978 = ORIENTED_EDGE('',*,*,#120979,.T.); +#120979 = EDGE_CURVE('',#120972,#120980,#120982,.T.); +#120980 = VERTEX_POINT('',#120981); +#120981 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#120982 = LINE('',#120983,#120984); +#120983 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#120984 = VECTOR('',#120985,1.); +#120985 = DIRECTION('',(0.,0.,1.)); +#120986 = ORIENTED_EDGE('',*,*,#120987,.T.); +#120987 = EDGE_CURVE('',#120980,#118570,#120988,.T.); +#120988 = LINE('',#120989,#120990); +#120989 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#120990 = VECTOR('',#120991,1.); +#120991 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#120992 = ORIENTED_EDGE('',*,*,#118577,.F.); +#120993 = ORIENTED_EDGE('',*,*,#120938,.T.); +#120994 = PLANE('',#120995); +#120995 = AXIS2_PLACEMENT_3D('',#120996,#120997,#120998); +#120996 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#120997 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120998 = DIRECTION('',(0.,0.,1.)); +#120999 = ADVANCED_FACE('',(#121000),#121018,.T.); +#121000 = FACE_BOUND('',#121001,.T.); +#121001 = EDGE_LOOP('',(#121002,#121010,#121016,#121017)); +#121002 = ORIENTED_EDGE('',*,*,#121003,.T.); +#121003 = EDGE_CURVE('',#120980,#121004,#121006,.T.); +#121004 = VERTEX_POINT('',#121005); +#121005 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#121006 = LINE('',#121007,#121008); +#121007 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#121008 = VECTOR('',#121009,1.); +#121009 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121010 = ORIENTED_EDGE('',*,*,#121011,.T.); +#121011 = EDGE_CURVE('',#121004,#118562,#121012,.T.); +#121012 = LINE('',#121013,#121014); +#121013 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#121014 = VECTOR('',#121015,1.); +#121015 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121016 = ORIENTED_EDGE('',*,*,#118569,.F.); +#121017 = ORIENTED_EDGE('',*,*,#120987,.F.); +#121018 = PLANE('',#121019); +#121019 = AXIS2_PLACEMENT_3D('',#121020,#121021,#121022); +#121020 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#121021 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121022 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121023 = ADVANCED_FACE('',(#121024),#121060,.F.); +#121024 = FACE_BOUND('',#121025,.F.); +#121025 = EDGE_LOOP('',(#121026,#121027,#121035,#121043,#121051,#121057, + #121058,#121059)); +#121026 = ORIENTED_EDGE('',*,*,#118657,.F.); +#121027 = ORIENTED_EDGE('',*,*,#121028,.T.); +#121028 = EDGE_CURVE('',#118650,#121029,#121031,.T.); +#121029 = VERTEX_POINT('',#121030); +#121030 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#121031 = LINE('',#121032,#121033); +#121032 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#121033 = VECTOR('',#121034,1.); +#121034 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121035 = ORIENTED_EDGE('',*,*,#121036,.T.); +#121036 = EDGE_CURVE('',#121029,#121037,#121039,.T.); +#121037 = VERTEX_POINT('',#121038); +#121038 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#121039 = LINE('',#121040,#121041); +#121040 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#121041 = VECTOR('',#121042,1.); +#121042 = DIRECTION('',(0.,0.,-1.)); +#121043 = ORIENTED_EDGE('',*,*,#121044,.T.); +#121044 = EDGE_CURVE('',#121037,#121045,#121047,.T.); +#121045 = VERTEX_POINT('',#121046); +#121046 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#121047 = LINE('',#121048,#121049); +#121048 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#121049 = VECTOR('',#121050,1.); +#121050 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121051 = ORIENTED_EDGE('',*,*,#121052,.T.); +#121052 = EDGE_CURVE('',#121045,#121004,#121053,.T.); +#121053 = LINE('',#121054,#121055); +#121054 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#121055 = VECTOR('',#121056,1.); +#121056 = DIRECTION('',(0.,0.,1.)); +#121057 = ORIENTED_EDGE('',*,*,#121011,.T.); +#121058 = ORIENTED_EDGE('',*,*,#118561,.F.); +#121059 = ORIENTED_EDGE('',*,*,#120923,.T.); +#121060 = PLANE('',#121061); +#121061 = AXIS2_PLACEMENT_3D('',#121062,#121063,#121064); +#121062 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#121063 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121064 = DIRECTION('',(0.,0.,1.)); +#121065 = ADVANCED_FACE('',(#121066),#121077,.T.); +#121066 = FACE_BOUND('',#121067,.T.); +#121067 = EDGE_LOOP('',(#121068,#121069,#121070,#121076)); +#121068 = ORIENTED_EDGE('',*,*,#118649,.T.); +#121069 = ORIENTED_EDGE('',*,*,#121028,.T.); +#121070 = ORIENTED_EDGE('',*,*,#121071,.F.); +#121071 = EDGE_CURVE('',#120956,#121029,#121072,.T.); +#121072 = LINE('',#121073,#121074); +#121073 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#121074 = VECTOR('',#121075,1.); +#121075 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121076 = ORIENTED_EDGE('',*,*,#120955,.F.); +#121077 = PLANE('',#121078); +#121078 = AXIS2_PLACEMENT_3D('',#121079,#121080,#121081); +#121079 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#121080 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121081 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121082 = ADVANCED_FACE('',(#121083),#121094,.T.); +#121083 = FACE_BOUND('',#121084,.T.); +#121084 = EDGE_LOOP('',(#121085,#121086,#121087,#121088)); +#121085 = ORIENTED_EDGE('',*,*,#118825,.T.); +#121086 = ORIENTED_EDGE('',*,*,#118688,.T.); +#121087 = ORIENTED_EDGE('',*,*,#118713,.T.); +#121088 = ORIENTED_EDGE('',*,*,#121089,.T.); +#121089 = EDGE_CURVE('',#118714,#118818,#121090,.T.); +#121090 = LINE('',#121091,#121092); +#121091 = CARTESIAN_POINT('',(0.1,-20.32,0.9)); +#121092 = VECTOR('',#121093,1.); +#121093 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121094 = PLANE('',#121095); +#121095 = AXIS2_PLACEMENT_3D('',#121096,#121097,#121098); +#121096 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#121097 = DIRECTION('',(0.,0.,1.)); +#121098 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121099 = ADVANCED_FACE('',(#121100),#121111,.T.); +#121100 = FACE_BOUND('',#121101,.T.); +#121101 = EDGE_LOOP('',(#121102,#121103,#121109,#121110)); +#121102 = ORIENTED_EDGE('',*,*,#118793,.T.); +#121103 = ORIENTED_EDGE('',*,*,#121104,.F.); +#121104 = EDGE_CURVE('',#118738,#118794,#121105,.T.); +#121105 = LINE('',#121106,#121107); +#121106 = CARTESIAN_POINT('',(-0.1,-20.32,0.9)); +#121107 = VECTOR('',#121108,1.); +#121108 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121109 = ORIENTED_EDGE('',*,*,#118745,.T.); +#121110 = ORIENTED_EDGE('',*,*,#118768,.T.); +#121111 = PLANE('',#121112); +#121112 = AXIS2_PLACEMENT_3D('',#121113,#121114,#121115); +#121113 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#121114 = DIRECTION('',(0.,0.,1.)); +#121115 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121116 = ADVANCED_FACE('',(#121117),#121160,.T.); +#121117 = FACE_BOUND('',#121118,.T.); +#121118 = EDGE_LOOP('',(#121119,#121120,#121128,#121136,#121144,#121152, + #121158,#121159)); +#121119 = ORIENTED_EDGE('',*,*,#118801,.F.); +#121120 = ORIENTED_EDGE('',*,*,#121121,.T.); +#121121 = EDGE_CURVE('',#118802,#121122,#121124,.T.); +#121122 = VERTEX_POINT('',#121123); +#121123 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#121124 = LINE('',#121125,#121126); +#121125 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#121126 = VECTOR('',#121127,1.); +#121127 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121128 = ORIENTED_EDGE('',*,*,#121129,.T.); +#121129 = EDGE_CURVE('',#121122,#121130,#121132,.T.); +#121130 = VERTEX_POINT('',#121131); +#121131 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#121132 = LINE('',#121133,#121134); +#121133 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#121134 = VECTOR('',#121135,1.); +#121135 = DIRECTION('',(0.,0.,-1.)); +#121136 = ORIENTED_EDGE('',*,*,#121137,.T.); +#121137 = EDGE_CURVE('',#121130,#121138,#121140,.T.); +#121138 = VERTEX_POINT('',#121139); +#121139 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#121140 = LINE('',#121141,#121142); +#121141 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#121142 = VECTOR('',#121143,1.); +#121143 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121144 = ORIENTED_EDGE('',*,*,#121145,.T.); +#121145 = EDGE_CURVE('',#121138,#121146,#121148,.T.); +#121146 = VERTEX_POINT('',#121147); +#121147 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121148 = LINE('',#121149,#121150); +#121149 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#121150 = VECTOR('',#121151,1.); +#121151 = DIRECTION('',(0.,0.,1.)); +#121152 = ORIENTED_EDGE('',*,*,#121153,.T.); +#121153 = EDGE_CURVE('',#121146,#118730,#121154,.T.); +#121154 = LINE('',#121155,#121156); +#121155 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121156 = VECTOR('',#121157,1.); +#121157 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121158 = ORIENTED_EDGE('',*,*,#118737,.F.); +#121159 = ORIENTED_EDGE('',*,*,#121104,.T.); +#121160 = PLANE('',#121161); +#121161 = AXIS2_PLACEMENT_3D('',#121162,#121163,#121164); +#121162 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#121163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121164 = DIRECTION('',(0.,0.,1.)); +#121165 = ADVANCED_FACE('',(#121166),#121184,.T.); +#121166 = FACE_BOUND('',#121167,.T.); +#121167 = EDGE_LOOP('',(#121168,#121176,#121182,#121183)); +#121168 = ORIENTED_EDGE('',*,*,#121169,.T.); +#121169 = EDGE_CURVE('',#121146,#121170,#121172,.T.); +#121170 = VERTEX_POINT('',#121171); +#121171 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#121172 = LINE('',#121173,#121174); +#121173 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121174 = VECTOR('',#121175,1.); +#121175 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121176 = ORIENTED_EDGE('',*,*,#121177,.T.); +#121177 = EDGE_CURVE('',#121170,#118722,#121178,.T.); +#121178 = LINE('',#121179,#121180); +#121179 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#121180 = VECTOR('',#121181,1.); +#121181 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121182 = ORIENTED_EDGE('',*,*,#118729,.F.); +#121183 = ORIENTED_EDGE('',*,*,#121153,.F.); +#121184 = PLANE('',#121185); +#121185 = AXIS2_PLACEMENT_3D('',#121186,#121187,#121188); +#121186 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121187 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121188 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121189 = ADVANCED_FACE('',(#121190),#121226,.F.); +#121190 = FACE_BOUND('',#121191,.F.); +#121191 = EDGE_LOOP('',(#121192,#121193,#121201,#121209,#121217,#121223, + #121224,#121225)); +#121192 = ORIENTED_EDGE('',*,*,#118817,.F.); +#121193 = ORIENTED_EDGE('',*,*,#121194,.T.); +#121194 = EDGE_CURVE('',#118810,#121195,#121197,.T.); +#121195 = VERTEX_POINT('',#121196); +#121196 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#121197 = LINE('',#121198,#121199); +#121198 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#121199 = VECTOR('',#121200,1.); +#121200 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121201 = ORIENTED_EDGE('',*,*,#121202,.T.); +#121202 = EDGE_CURVE('',#121195,#121203,#121205,.T.); +#121203 = VERTEX_POINT('',#121204); +#121204 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#121205 = LINE('',#121206,#121207); +#121206 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#121207 = VECTOR('',#121208,1.); +#121208 = DIRECTION('',(0.,0.,-1.)); +#121209 = ORIENTED_EDGE('',*,*,#121210,.T.); +#121210 = EDGE_CURVE('',#121203,#121211,#121213,.T.); +#121211 = VERTEX_POINT('',#121212); +#121212 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#121213 = LINE('',#121214,#121215); +#121214 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#121215 = VECTOR('',#121216,1.); +#121216 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121217 = ORIENTED_EDGE('',*,*,#121218,.T.); +#121218 = EDGE_CURVE('',#121211,#121170,#121219,.T.); +#121219 = LINE('',#121220,#121221); +#121220 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#121221 = VECTOR('',#121222,1.); +#121222 = DIRECTION('',(0.,0.,1.)); +#121223 = ORIENTED_EDGE('',*,*,#121177,.T.); +#121224 = ORIENTED_EDGE('',*,*,#118721,.F.); +#121225 = ORIENTED_EDGE('',*,*,#121089,.T.); +#121226 = PLANE('',#121227); +#121227 = AXIS2_PLACEMENT_3D('',#121228,#121229,#121230); +#121228 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#121229 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121230 = DIRECTION('',(0.,0.,1.)); +#121231 = ADVANCED_FACE('',(#121232),#121243,.T.); +#121232 = FACE_BOUND('',#121233,.T.); +#121233 = EDGE_LOOP('',(#121234,#121235,#121236,#121242)); +#121234 = ORIENTED_EDGE('',*,*,#118809,.T.); +#121235 = ORIENTED_EDGE('',*,*,#121194,.T.); +#121236 = ORIENTED_EDGE('',*,*,#121237,.F.); +#121237 = EDGE_CURVE('',#121122,#121195,#121238,.T.); +#121238 = LINE('',#121239,#121240); +#121239 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#121240 = VECTOR('',#121241,1.); +#121241 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121242 = ORIENTED_EDGE('',*,*,#121121,.F.); +#121243 = PLANE('',#121244); +#121244 = AXIS2_PLACEMENT_3D('',#121245,#121246,#121247); +#121245 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#121246 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121247 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121248 = ADVANCED_FACE('',(#121249),#121260,.T.); +#121249 = FACE_BOUND('',#121250,.T.); +#121250 = EDGE_LOOP('',(#121251,#121252,#121253,#121254)); +#121251 = ORIENTED_EDGE('',*,*,#118985,.T.); +#121252 = ORIENTED_EDGE('',*,*,#118848,.T.); +#121253 = ORIENTED_EDGE('',*,*,#118873,.T.); +#121254 = ORIENTED_EDGE('',*,*,#121255,.T.); +#121255 = EDGE_CURVE('',#118874,#118978,#121256,.T.); +#121256 = LINE('',#121257,#121258); +#121257 = CARTESIAN_POINT('',(0.1,-17.78,0.9)); +#121258 = VECTOR('',#121259,1.); +#121259 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121260 = PLANE('',#121261); +#121261 = AXIS2_PLACEMENT_3D('',#121262,#121263,#121264); +#121262 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#121263 = DIRECTION('',(0.,0.,1.)); +#121264 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121265 = ADVANCED_FACE('',(#121266),#121277,.T.); +#121266 = FACE_BOUND('',#121267,.T.); +#121267 = EDGE_LOOP('',(#121268,#121269,#121275,#121276)); +#121268 = ORIENTED_EDGE('',*,*,#118953,.T.); +#121269 = ORIENTED_EDGE('',*,*,#121270,.F.); +#121270 = EDGE_CURVE('',#118898,#118954,#121271,.T.); +#121271 = LINE('',#121272,#121273); +#121272 = CARTESIAN_POINT('',(-0.1,-17.78,0.9)); +#121273 = VECTOR('',#121274,1.); +#121274 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121275 = ORIENTED_EDGE('',*,*,#118905,.T.); +#121276 = ORIENTED_EDGE('',*,*,#118928,.T.); +#121277 = PLANE('',#121278); +#121278 = AXIS2_PLACEMENT_3D('',#121279,#121280,#121281); +#121279 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#121280 = DIRECTION('',(0.,0.,1.)); +#121281 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121282 = ADVANCED_FACE('',(#121283),#121326,.T.); +#121283 = FACE_BOUND('',#121284,.T.); +#121284 = EDGE_LOOP('',(#121285,#121286,#121294,#121302,#121310,#121318, + #121324,#121325)); +#121285 = ORIENTED_EDGE('',*,*,#118961,.F.); +#121286 = ORIENTED_EDGE('',*,*,#121287,.T.); +#121287 = EDGE_CURVE('',#118962,#121288,#121290,.T.); +#121288 = VERTEX_POINT('',#121289); +#121289 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#121290 = LINE('',#121291,#121292); +#121291 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#121292 = VECTOR('',#121293,1.); +#121293 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121294 = ORIENTED_EDGE('',*,*,#121295,.T.); +#121295 = EDGE_CURVE('',#121288,#121296,#121298,.T.); +#121296 = VERTEX_POINT('',#121297); +#121297 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#121298 = LINE('',#121299,#121300); +#121299 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#121300 = VECTOR('',#121301,1.); +#121301 = DIRECTION('',(0.,0.,-1.)); +#121302 = ORIENTED_EDGE('',*,*,#121303,.T.); +#121303 = EDGE_CURVE('',#121296,#121304,#121306,.T.); +#121304 = VERTEX_POINT('',#121305); +#121305 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#121306 = LINE('',#121307,#121308); +#121307 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#121308 = VECTOR('',#121309,1.); +#121309 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121310 = ORIENTED_EDGE('',*,*,#121311,.T.); +#121311 = EDGE_CURVE('',#121304,#121312,#121314,.T.); +#121312 = VERTEX_POINT('',#121313); +#121313 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121314 = LINE('',#121315,#121316); +#121315 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#121316 = VECTOR('',#121317,1.); +#121317 = DIRECTION('',(0.,0.,1.)); +#121318 = ORIENTED_EDGE('',*,*,#121319,.T.); +#121319 = EDGE_CURVE('',#121312,#118890,#121320,.T.); +#121320 = LINE('',#121321,#121322); +#121321 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121322 = VECTOR('',#121323,1.); +#121323 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121324 = ORIENTED_EDGE('',*,*,#118897,.F.); +#121325 = ORIENTED_EDGE('',*,*,#121270,.T.); +#121326 = PLANE('',#121327); +#121327 = AXIS2_PLACEMENT_3D('',#121328,#121329,#121330); +#121328 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#121329 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121330 = DIRECTION('',(0.,0.,1.)); +#121331 = ADVANCED_FACE('',(#121332),#121350,.T.); +#121332 = FACE_BOUND('',#121333,.T.); +#121333 = EDGE_LOOP('',(#121334,#121342,#121348,#121349)); +#121334 = ORIENTED_EDGE('',*,*,#121335,.T.); +#121335 = EDGE_CURVE('',#121312,#121336,#121338,.T.); +#121336 = VERTEX_POINT('',#121337); +#121337 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#121338 = LINE('',#121339,#121340); +#121339 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121340 = VECTOR('',#121341,1.); +#121341 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121342 = ORIENTED_EDGE('',*,*,#121343,.T.); +#121343 = EDGE_CURVE('',#121336,#118882,#121344,.T.); +#121344 = LINE('',#121345,#121346); +#121345 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#121346 = VECTOR('',#121347,1.); +#121347 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121348 = ORIENTED_EDGE('',*,*,#118889,.F.); +#121349 = ORIENTED_EDGE('',*,*,#121319,.F.); +#121350 = PLANE('',#121351); +#121351 = AXIS2_PLACEMENT_3D('',#121352,#121353,#121354); +#121352 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121353 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121354 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121355 = ADVANCED_FACE('',(#121356),#121392,.F.); +#121356 = FACE_BOUND('',#121357,.F.); +#121357 = EDGE_LOOP('',(#121358,#121359,#121367,#121375,#121383,#121389, + #121390,#121391)); +#121358 = ORIENTED_EDGE('',*,*,#118977,.F.); +#121359 = ORIENTED_EDGE('',*,*,#121360,.T.); +#121360 = EDGE_CURVE('',#118970,#121361,#121363,.T.); +#121361 = VERTEX_POINT('',#121362); +#121362 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#121363 = LINE('',#121364,#121365); +#121364 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#121365 = VECTOR('',#121366,1.); +#121366 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121367 = ORIENTED_EDGE('',*,*,#121368,.T.); +#121368 = EDGE_CURVE('',#121361,#121369,#121371,.T.); +#121369 = VERTEX_POINT('',#121370); +#121370 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#121371 = LINE('',#121372,#121373); +#121372 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#121373 = VECTOR('',#121374,1.); +#121374 = DIRECTION('',(0.,0.,-1.)); +#121375 = ORIENTED_EDGE('',*,*,#121376,.T.); +#121376 = EDGE_CURVE('',#121369,#121377,#121379,.T.); +#121377 = VERTEX_POINT('',#121378); +#121378 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#121379 = LINE('',#121380,#121381); +#121380 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#121381 = VECTOR('',#121382,1.); +#121382 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121383 = ORIENTED_EDGE('',*,*,#121384,.T.); +#121384 = EDGE_CURVE('',#121377,#121336,#121385,.T.); +#121385 = LINE('',#121386,#121387); +#121386 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#121387 = VECTOR('',#121388,1.); +#121388 = DIRECTION('',(0.,0.,1.)); +#121389 = ORIENTED_EDGE('',*,*,#121343,.T.); +#121390 = ORIENTED_EDGE('',*,*,#118881,.F.); +#121391 = ORIENTED_EDGE('',*,*,#121255,.T.); +#121392 = PLANE('',#121393); +#121393 = AXIS2_PLACEMENT_3D('',#121394,#121395,#121396); +#121394 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#121395 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121396 = DIRECTION('',(0.,0.,1.)); +#121397 = ADVANCED_FACE('',(#121398),#121409,.T.); +#121398 = FACE_BOUND('',#121399,.T.); +#121399 = EDGE_LOOP('',(#121400,#121401,#121402,#121408)); +#121400 = ORIENTED_EDGE('',*,*,#118969,.T.); +#121401 = ORIENTED_EDGE('',*,*,#121360,.T.); +#121402 = ORIENTED_EDGE('',*,*,#121403,.F.); +#121403 = EDGE_CURVE('',#121288,#121361,#121404,.T.); +#121404 = LINE('',#121405,#121406); +#121405 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#121406 = VECTOR('',#121407,1.); +#121407 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121408 = ORIENTED_EDGE('',*,*,#121287,.F.); +#121409 = PLANE('',#121410); +#121410 = AXIS2_PLACEMENT_3D('',#121411,#121412,#121413); +#121411 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#121412 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121413 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121414 = ADVANCED_FACE('',(#121415),#121426,.T.); +#121415 = FACE_BOUND('',#121416,.T.); +#121416 = EDGE_LOOP('',(#121417,#121418,#121419,#121420)); +#121417 = ORIENTED_EDGE('',*,*,#119145,.T.); +#121418 = ORIENTED_EDGE('',*,*,#119008,.T.); +#121419 = ORIENTED_EDGE('',*,*,#119033,.T.); +#121420 = ORIENTED_EDGE('',*,*,#121421,.T.); +#121421 = EDGE_CURVE('',#119034,#119138,#121422,.T.); +#121422 = LINE('',#121423,#121424); +#121423 = CARTESIAN_POINT('',(0.1,-15.24,0.9)); +#121424 = VECTOR('',#121425,1.); +#121425 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121426 = PLANE('',#121427); +#121427 = AXIS2_PLACEMENT_3D('',#121428,#121429,#121430); +#121428 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#121429 = DIRECTION('',(0.,0.,1.)); +#121430 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121431 = ADVANCED_FACE('',(#121432),#121443,.T.); +#121432 = FACE_BOUND('',#121433,.T.); +#121433 = EDGE_LOOP('',(#121434,#121435,#121441,#121442)); +#121434 = ORIENTED_EDGE('',*,*,#119113,.T.); +#121435 = ORIENTED_EDGE('',*,*,#121436,.F.); +#121436 = EDGE_CURVE('',#119058,#119114,#121437,.T.); +#121437 = LINE('',#121438,#121439); +#121438 = CARTESIAN_POINT('',(-0.1,-15.24,0.9)); +#121439 = VECTOR('',#121440,1.); +#121440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121441 = ORIENTED_EDGE('',*,*,#119065,.T.); +#121442 = ORIENTED_EDGE('',*,*,#119088,.T.); +#121443 = PLANE('',#121444); +#121444 = AXIS2_PLACEMENT_3D('',#121445,#121446,#121447); +#121445 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#121446 = DIRECTION('',(0.,0.,1.)); +#121447 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121448 = ADVANCED_FACE('',(#121449),#121492,.T.); +#121449 = FACE_BOUND('',#121450,.T.); +#121450 = EDGE_LOOP('',(#121451,#121452,#121460,#121468,#121476,#121484, + #121490,#121491)); +#121451 = ORIENTED_EDGE('',*,*,#119121,.F.); +#121452 = ORIENTED_EDGE('',*,*,#121453,.T.); +#121453 = EDGE_CURVE('',#119122,#121454,#121456,.T.); +#121454 = VERTEX_POINT('',#121455); +#121455 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#121456 = LINE('',#121457,#121458); +#121457 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#121458 = VECTOR('',#121459,1.); +#121459 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121460 = ORIENTED_EDGE('',*,*,#121461,.T.); +#121461 = EDGE_CURVE('',#121454,#121462,#121464,.T.); +#121462 = VERTEX_POINT('',#121463); +#121463 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#121464 = LINE('',#121465,#121466); +#121465 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#121466 = VECTOR('',#121467,1.); +#121467 = DIRECTION('',(0.,0.,-1.)); +#121468 = ORIENTED_EDGE('',*,*,#121469,.T.); +#121469 = EDGE_CURVE('',#121462,#121470,#121472,.T.); +#121470 = VERTEX_POINT('',#121471); +#121471 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#121472 = LINE('',#121473,#121474); +#121473 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#121474 = VECTOR('',#121475,1.); +#121475 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121476 = ORIENTED_EDGE('',*,*,#121477,.T.); +#121477 = EDGE_CURVE('',#121470,#121478,#121480,.T.); +#121478 = VERTEX_POINT('',#121479); +#121479 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121480 = LINE('',#121481,#121482); +#121481 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#121482 = VECTOR('',#121483,1.); +#121483 = DIRECTION('',(0.,0.,1.)); +#121484 = ORIENTED_EDGE('',*,*,#121485,.T.); +#121485 = EDGE_CURVE('',#121478,#119050,#121486,.T.); +#121486 = LINE('',#121487,#121488); +#121487 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121488 = VECTOR('',#121489,1.); +#121489 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121490 = ORIENTED_EDGE('',*,*,#119057,.F.); +#121491 = ORIENTED_EDGE('',*,*,#121436,.T.); +#121492 = PLANE('',#121493); +#121493 = AXIS2_PLACEMENT_3D('',#121494,#121495,#121496); +#121494 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#121495 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121496 = DIRECTION('',(0.,0.,1.)); +#121497 = ADVANCED_FACE('',(#121498),#121516,.T.); +#121498 = FACE_BOUND('',#121499,.T.); +#121499 = EDGE_LOOP('',(#121500,#121508,#121514,#121515)); +#121500 = ORIENTED_EDGE('',*,*,#121501,.T.); +#121501 = EDGE_CURVE('',#121478,#121502,#121504,.T.); +#121502 = VERTEX_POINT('',#121503); +#121503 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#121504 = LINE('',#121505,#121506); +#121505 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121506 = VECTOR('',#121507,1.); +#121507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121508 = ORIENTED_EDGE('',*,*,#121509,.T.); +#121509 = EDGE_CURVE('',#121502,#119042,#121510,.T.); +#121510 = LINE('',#121511,#121512); +#121511 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#121512 = VECTOR('',#121513,1.); +#121513 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121514 = ORIENTED_EDGE('',*,*,#119049,.F.); +#121515 = ORIENTED_EDGE('',*,*,#121485,.F.); +#121516 = PLANE('',#121517); +#121517 = AXIS2_PLACEMENT_3D('',#121518,#121519,#121520); +#121518 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121519 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121520 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121521 = ADVANCED_FACE('',(#121522),#121558,.F.); +#121522 = FACE_BOUND('',#121523,.F.); +#121523 = EDGE_LOOP('',(#121524,#121525,#121533,#121541,#121549,#121555, + #121556,#121557)); +#121524 = ORIENTED_EDGE('',*,*,#119137,.F.); +#121525 = ORIENTED_EDGE('',*,*,#121526,.T.); +#121526 = EDGE_CURVE('',#119130,#121527,#121529,.T.); +#121527 = VERTEX_POINT('',#121528); +#121528 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#121529 = LINE('',#121530,#121531); +#121530 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#121531 = VECTOR('',#121532,1.); +#121532 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121533 = ORIENTED_EDGE('',*,*,#121534,.T.); +#121534 = EDGE_CURVE('',#121527,#121535,#121537,.T.); +#121535 = VERTEX_POINT('',#121536); +#121536 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#121537 = LINE('',#121538,#121539); +#121538 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#121539 = VECTOR('',#121540,1.); +#121540 = DIRECTION('',(0.,0.,-1.)); +#121541 = ORIENTED_EDGE('',*,*,#121542,.T.); +#121542 = EDGE_CURVE('',#121535,#121543,#121545,.T.); +#121543 = VERTEX_POINT('',#121544); +#121544 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#121545 = LINE('',#121546,#121547); +#121546 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#121547 = VECTOR('',#121548,1.); +#121548 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121549 = ORIENTED_EDGE('',*,*,#121550,.T.); +#121550 = EDGE_CURVE('',#121543,#121502,#121551,.T.); +#121551 = LINE('',#121552,#121553); +#121552 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#121553 = VECTOR('',#121554,1.); +#121554 = DIRECTION('',(0.,0.,1.)); +#121555 = ORIENTED_EDGE('',*,*,#121509,.T.); +#121556 = ORIENTED_EDGE('',*,*,#119041,.F.); +#121557 = ORIENTED_EDGE('',*,*,#121421,.T.); +#121558 = PLANE('',#121559); +#121559 = AXIS2_PLACEMENT_3D('',#121560,#121561,#121562); +#121560 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#121561 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121562 = DIRECTION('',(0.,0.,1.)); +#121563 = ADVANCED_FACE('',(#121564),#121575,.T.); +#121564 = FACE_BOUND('',#121565,.T.); +#121565 = EDGE_LOOP('',(#121566,#121567,#121568,#121574)); +#121566 = ORIENTED_EDGE('',*,*,#119129,.T.); +#121567 = ORIENTED_EDGE('',*,*,#121526,.T.); +#121568 = ORIENTED_EDGE('',*,*,#121569,.F.); +#121569 = EDGE_CURVE('',#121454,#121527,#121570,.T.); +#121570 = LINE('',#121571,#121572); +#121571 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#121572 = VECTOR('',#121573,1.); +#121573 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121574 = ORIENTED_EDGE('',*,*,#121453,.F.); +#121575 = PLANE('',#121576); +#121576 = AXIS2_PLACEMENT_3D('',#121577,#121578,#121579); +#121577 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#121578 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121579 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121580 = ADVANCED_FACE('',(#121581),#121592,.T.); +#121581 = FACE_BOUND('',#121582,.T.); +#121582 = EDGE_LOOP('',(#121583,#121584,#121585,#121586)); +#121583 = ORIENTED_EDGE('',*,*,#119305,.T.); +#121584 = ORIENTED_EDGE('',*,*,#119168,.T.); +#121585 = ORIENTED_EDGE('',*,*,#119193,.T.); +#121586 = ORIENTED_EDGE('',*,*,#121587,.T.); +#121587 = EDGE_CURVE('',#119194,#119298,#121588,.T.); +#121588 = LINE('',#121589,#121590); +#121589 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#121590 = VECTOR('',#121591,1.); +#121591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121592 = PLANE('',#121593); +#121593 = AXIS2_PLACEMENT_3D('',#121594,#121595,#121596); +#121594 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#121595 = DIRECTION('',(0.,0.,1.)); +#121596 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121597 = ADVANCED_FACE('',(#121598),#121609,.T.); +#121598 = FACE_BOUND('',#121599,.T.); +#121599 = EDGE_LOOP('',(#121600,#121601,#121607,#121608)); +#121600 = ORIENTED_EDGE('',*,*,#119273,.T.); +#121601 = ORIENTED_EDGE('',*,*,#121602,.F.); +#121602 = EDGE_CURVE('',#119218,#119274,#121603,.T.); +#121603 = LINE('',#121604,#121605); +#121604 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#121605 = VECTOR('',#121606,1.); +#121606 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121607 = ORIENTED_EDGE('',*,*,#119225,.T.); +#121608 = ORIENTED_EDGE('',*,*,#119248,.T.); +#121609 = PLANE('',#121610); +#121610 = AXIS2_PLACEMENT_3D('',#121611,#121612,#121613); +#121611 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#121612 = DIRECTION('',(0.,0.,1.)); +#121613 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121614 = ADVANCED_FACE('',(#121615),#121658,.T.); +#121615 = FACE_BOUND('',#121616,.T.); +#121616 = EDGE_LOOP('',(#121617,#121618,#121626,#121634,#121642,#121650, + #121656,#121657)); +#121617 = ORIENTED_EDGE('',*,*,#119281,.F.); +#121618 = ORIENTED_EDGE('',*,*,#121619,.T.); +#121619 = EDGE_CURVE('',#119282,#121620,#121622,.T.); +#121620 = VERTEX_POINT('',#121621); +#121621 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#121622 = LINE('',#121623,#121624); +#121623 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#121624 = VECTOR('',#121625,1.); +#121625 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121626 = ORIENTED_EDGE('',*,*,#121627,.T.); +#121627 = EDGE_CURVE('',#121620,#121628,#121630,.T.); +#121628 = VERTEX_POINT('',#121629); +#121629 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#121630 = LINE('',#121631,#121632); +#121631 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#121632 = VECTOR('',#121633,1.); +#121633 = DIRECTION('',(0.,0.,-1.)); +#121634 = ORIENTED_EDGE('',*,*,#121635,.T.); +#121635 = EDGE_CURVE('',#121628,#121636,#121638,.T.); +#121636 = VERTEX_POINT('',#121637); +#121637 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#121638 = LINE('',#121639,#121640); +#121639 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#121640 = VECTOR('',#121641,1.); +#121641 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121642 = ORIENTED_EDGE('',*,*,#121643,.T.); +#121643 = EDGE_CURVE('',#121636,#121644,#121646,.T.); +#121644 = VERTEX_POINT('',#121645); +#121645 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121646 = LINE('',#121647,#121648); +#121647 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#121648 = VECTOR('',#121649,1.); +#121649 = DIRECTION('',(0.,0.,1.)); +#121650 = ORIENTED_EDGE('',*,*,#121651,.T.); +#121651 = EDGE_CURVE('',#121644,#119210,#121652,.T.); +#121652 = LINE('',#121653,#121654); +#121653 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121654 = VECTOR('',#121655,1.); +#121655 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121656 = ORIENTED_EDGE('',*,*,#119217,.F.); +#121657 = ORIENTED_EDGE('',*,*,#121602,.T.); +#121658 = PLANE('',#121659); +#121659 = AXIS2_PLACEMENT_3D('',#121660,#121661,#121662); +#121660 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#121661 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121662 = DIRECTION('',(0.,0.,1.)); +#121663 = ADVANCED_FACE('',(#121664),#121682,.T.); +#121664 = FACE_BOUND('',#121665,.T.); +#121665 = EDGE_LOOP('',(#121666,#121674,#121680,#121681)); +#121666 = ORIENTED_EDGE('',*,*,#121667,.T.); +#121667 = EDGE_CURVE('',#121644,#121668,#121670,.T.); +#121668 = VERTEX_POINT('',#121669); +#121669 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#121670 = LINE('',#121671,#121672); +#121671 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121672 = VECTOR('',#121673,1.); +#121673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121674 = ORIENTED_EDGE('',*,*,#121675,.T.); +#121675 = EDGE_CURVE('',#121668,#119202,#121676,.T.); +#121676 = LINE('',#121677,#121678); +#121677 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#121678 = VECTOR('',#121679,1.); +#121679 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121680 = ORIENTED_EDGE('',*,*,#119209,.F.); +#121681 = ORIENTED_EDGE('',*,*,#121651,.F.); +#121682 = PLANE('',#121683); +#121683 = AXIS2_PLACEMENT_3D('',#121684,#121685,#121686); +#121684 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121685 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121686 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121687 = ADVANCED_FACE('',(#121688),#121724,.F.); +#121688 = FACE_BOUND('',#121689,.F.); +#121689 = EDGE_LOOP('',(#121690,#121691,#121699,#121707,#121715,#121721, + #121722,#121723)); +#121690 = ORIENTED_EDGE('',*,*,#119297,.F.); +#121691 = ORIENTED_EDGE('',*,*,#121692,.T.); +#121692 = EDGE_CURVE('',#119290,#121693,#121695,.T.); +#121693 = VERTEX_POINT('',#121694); +#121694 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#121695 = LINE('',#121696,#121697); +#121696 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#121697 = VECTOR('',#121698,1.); +#121698 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121699 = ORIENTED_EDGE('',*,*,#121700,.T.); +#121700 = EDGE_CURVE('',#121693,#121701,#121703,.T.); +#121701 = VERTEX_POINT('',#121702); +#121702 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#121703 = LINE('',#121704,#121705); +#121704 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#121705 = VECTOR('',#121706,1.); +#121706 = DIRECTION('',(0.,0.,-1.)); +#121707 = ORIENTED_EDGE('',*,*,#121708,.T.); +#121708 = EDGE_CURVE('',#121701,#121709,#121711,.T.); +#121709 = VERTEX_POINT('',#121710); +#121710 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#121711 = LINE('',#121712,#121713); +#121712 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#121713 = VECTOR('',#121714,1.); +#121714 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121715 = ORIENTED_EDGE('',*,*,#121716,.T.); +#121716 = EDGE_CURVE('',#121709,#121668,#121717,.T.); +#121717 = LINE('',#121718,#121719); +#121718 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#121719 = VECTOR('',#121720,1.); +#121720 = DIRECTION('',(0.,0.,1.)); +#121721 = ORIENTED_EDGE('',*,*,#121675,.T.); +#121722 = ORIENTED_EDGE('',*,*,#119201,.F.); +#121723 = ORIENTED_EDGE('',*,*,#121587,.T.); +#121724 = PLANE('',#121725); +#121725 = AXIS2_PLACEMENT_3D('',#121726,#121727,#121728); +#121726 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#121727 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121728 = DIRECTION('',(0.,0.,1.)); +#121729 = ADVANCED_FACE('',(#121730),#121741,.T.); +#121730 = FACE_BOUND('',#121731,.T.); +#121731 = EDGE_LOOP('',(#121732,#121733,#121734,#121740)); +#121732 = ORIENTED_EDGE('',*,*,#119289,.T.); +#121733 = ORIENTED_EDGE('',*,*,#121692,.T.); +#121734 = ORIENTED_EDGE('',*,*,#121735,.F.); +#121735 = EDGE_CURVE('',#121620,#121693,#121736,.T.); +#121736 = LINE('',#121737,#121738); +#121737 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#121738 = VECTOR('',#121739,1.); +#121739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121740 = ORIENTED_EDGE('',*,*,#121619,.F.); +#121741 = PLANE('',#121742); +#121742 = AXIS2_PLACEMENT_3D('',#121743,#121744,#121745); +#121743 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#121744 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121745 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121746 = ADVANCED_FACE('',(#121747),#121758,.T.); +#121747 = FACE_BOUND('',#121748,.T.); +#121748 = EDGE_LOOP('',(#121749,#121750,#121751,#121752)); +#121749 = ORIENTED_EDGE('',*,*,#119465,.T.); +#121750 = ORIENTED_EDGE('',*,*,#119328,.T.); +#121751 = ORIENTED_EDGE('',*,*,#119353,.T.); +#121752 = ORIENTED_EDGE('',*,*,#121753,.T.); +#121753 = EDGE_CURVE('',#119354,#119458,#121754,.T.); +#121754 = LINE('',#121755,#121756); +#121755 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#121756 = VECTOR('',#121757,1.); +#121757 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121758 = PLANE('',#121759); +#121759 = AXIS2_PLACEMENT_3D('',#121760,#121761,#121762); +#121760 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#121761 = DIRECTION('',(0.,0.,1.)); +#121762 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121763 = ADVANCED_FACE('',(#121764),#121775,.T.); +#121764 = FACE_BOUND('',#121765,.T.); +#121765 = EDGE_LOOP('',(#121766,#121767,#121773,#121774)); +#121766 = ORIENTED_EDGE('',*,*,#119433,.T.); +#121767 = ORIENTED_EDGE('',*,*,#121768,.F.); +#121768 = EDGE_CURVE('',#119378,#119434,#121769,.T.); +#121769 = LINE('',#121770,#121771); +#121770 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#121771 = VECTOR('',#121772,1.); +#121772 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121773 = ORIENTED_EDGE('',*,*,#119385,.T.); +#121774 = ORIENTED_EDGE('',*,*,#119408,.T.); +#121775 = PLANE('',#121776); +#121776 = AXIS2_PLACEMENT_3D('',#121777,#121778,#121779); +#121777 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#121778 = DIRECTION('',(0.,0.,1.)); +#121779 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121780 = ADVANCED_FACE('',(#121781),#121824,.T.); +#121781 = FACE_BOUND('',#121782,.T.); +#121782 = EDGE_LOOP('',(#121783,#121784,#121792,#121800,#121808,#121816, + #121822,#121823)); +#121783 = ORIENTED_EDGE('',*,*,#119441,.F.); +#121784 = ORIENTED_EDGE('',*,*,#121785,.T.); +#121785 = EDGE_CURVE('',#119442,#121786,#121788,.T.); +#121786 = VERTEX_POINT('',#121787); +#121787 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#121788 = LINE('',#121789,#121790); +#121789 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#121790 = VECTOR('',#121791,1.); +#121791 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121792 = ORIENTED_EDGE('',*,*,#121793,.T.); +#121793 = EDGE_CURVE('',#121786,#121794,#121796,.T.); +#121794 = VERTEX_POINT('',#121795); +#121795 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#121796 = LINE('',#121797,#121798); +#121797 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#121798 = VECTOR('',#121799,1.); +#121799 = DIRECTION('',(0.,0.,-1.)); +#121800 = ORIENTED_EDGE('',*,*,#121801,.T.); +#121801 = EDGE_CURVE('',#121794,#121802,#121804,.T.); +#121802 = VERTEX_POINT('',#121803); +#121803 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#121804 = LINE('',#121805,#121806); +#121805 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#121806 = VECTOR('',#121807,1.); +#121807 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121808 = ORIENTED_EDGE('',*,*,#121809,.T.); +#121809 = EDGE_CURVE('',#121802,#121810,#121812,.T.); +#121810 = VERTEX_POINT('',#121811); +#121811 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121812 = LINE('',#121813,#121814); +#121813 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#121814 = VECTOR('',#121815,1.); +#121815 = DIRECTION('',(0.,0.,1.)); +#121816 = ORIENTED_EDGE('',*,*,#121817,.T.); +#121817 = EDGE_CURVE('',#121810,#119370,#121818,.T.); +#121818 = LINE('',#121819,#121820); +#121819 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121820 = VECTOR('',#121821,1.); +#121821 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121822 = ORIENTED_EDGE('',*,*,#119377,.F.); +#121823 = ORIENTED_EDGE('',*,*,#121768,.T.); +#121824 = PLANE('',#121825); +#121825 = AXIS2_PLACEMENT_3D('',#121826,#121827,#121828); +#121826 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#121827 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121828 = DIRECTION('',(0.,0.,1.)); +#121829 = ADVANCED_FACE('',(#121830),#121848,.T.); +#121830 = FACE_BOUND('',#121831,.T.); +#121831 = EDGE_LOOP('',(#121832,#121840,#121846,#121847)); +#121832 = ORIENTED_EDGE('',*,*,#121833,.T.); +#121833 = EDGE_CURVE('',#121810,#121834,#121836,.T.); +#121834 = VERTEX_POINT('',#121835); +#121835 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#121836 = LINE('',#121837,#121838); +#121837 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121838 = VECTOR('',#121839,1.); +#121839 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121840 = ORIENTED_EDGE('',*,*,#121841,.T.); +#121841 = EDGE_CURVE('',#121834,#119362,#121842,.T.); +#121842 = LINE('',#121843,#121844); +#121843 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#121844 = VECTOR('',#121845,1.); +#121845 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121846 = ORIENTED_EDGE('',*,*,#119369,.F.); +#121847 = ORIENTED_EDGE('',*,*,#121817,.F.); +#121848 = PLANE('',#121849); +#121849 = AXIS2_PLACEMENT_3D('',#121850,#121851,#121852); +#121850 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121851 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121852 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121853 = ADVANCED_FACE('',(#121854),#121890,.F.); +#121854 = FACE_BOUND('',#121855,.F.); +#121855 = EDGE_LOOP('',(#121856,#121857,#121865,#121873,#121881,#121887, + #121888,#121889)); +#121856 = ORIENTED_EDGE('',*,*,#119457,.F.); +#121857 = ORIENTED_EDGE('',*,*,#121858,.T.); +#121858 = EDGE_CURVE('',#119450,#121859,#121861,.T.); +#121859 = VERTEX_POINT('',#121860); +#121860 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#121861 = LINE('',#121862,#121863); +#121862 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#121863 = VECTOR('',#121864,1.); +#121864 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121865 = ORIENTED_EDGE('',*,*,#121866,.T.); +#121866 = EDGE_CURVE('',#121859,#121867,#121869,.T.); +#121867 = VERTEX_POINT('',#121868); +#121868 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#121869 = LINE('',#121870,#121871); +#121870 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#121871 = VECTOR('',#121872,1.); +#121872 = DIRECTION('',(0.,0.,-1.)); +#121873 = ORIENTED_EDGE('',*,*,#121874,.T.); +#121874 = EDGE_CURVE('',#121867,#121875,#121877,.T.); +#121875 = VERTEX_POINT('',#121876); +#121876 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#121877 = LINE('',#121878,#121879); +#121878 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#121879 = VECTOR('',#121880,1.); +#121880 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121881 = ORIENTED_EDGE('',*,*,#121882,.T.); +#121882 = EDGE_CURVE('',#121875,#121834,#121883,.T.); +#121883 = LINE('',#121884,#121885); +#121884 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#121885 = VECTOR('',#121886,1.); +#121886 = DIRECTION('',(0.,0.,1.)); +#121887 = ORIENTED_EDGE('',*,*,#121841,.T.); +#121888 = ORIENTED_EDGE('',*,*,#119361,.F.); +#121889 = ORIENTED_EDGE('',*,*,#121753,.T.); +#121890 = PLANE('',#121891); +#121891 = AXIS2_PLACEMENT_3D('',#121892,#121893,#121894); +#121892 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#121893 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121894 = DIRECTION('',(0.,0.,1.)); +#121895 = ADVANCED_FACE('',(#121896),#121907,.T.); +#121896 = FACE_BOUND('',#121897,.T.); +#121897 = EDGE_LOOP('',(#121898,#121899,#121900,#121906)); +#121898 = ORIENTED_EDGE('',*,*,#119449,.T.); +#121899 = ORIENTED_EDGE('',*,*,#121858,.T.); +#121900 = ORIENTED_EDGE('',*,*,#121901,.F.); +#121901 = EDGE_CURVE('',#121786,#121859,#121902,.T.); +#121902 = LINE('',#121903,#121904); +#121903 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#121904 = VECTOR('',#121905,1.); +#121905 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121906 = ORIENTED_EDGE('',*,*,#121785,.F.); +#121907 = PLANE('',#121908); +#121908 = AXIS2_PLACEMENT_3D('',#121909,#121910,#121911); +#121909 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#121910 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121911 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121912 = ADVANCED_FACE('',(#121913),#121924,.T.); +#121913 = FACE_BOUND('',#121914,.T.); +#121914 = EDGE_LOOP('',(#121915,#121916,#121917,#121918)); +#121915 = ORIENTED_EDGE('',*,*,#119625,.T.); +#121916 = ORIENTED_EDGE('',*,*,#119488,.T.); +#121917 = ORIENTED_EDGE('',*,*,#119513,.T.); +#121918 = ORIENTED_EDGE('',*,*,#121919,.T.); +#121919 = EDGE_CURVE('',#119514,#119618,#121920,.T.); +#121920 = LINE('',#121921,#121922); +#121921 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#121922 = VECTOR('',#121923,1.); +#121923 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121924 = PLANE('',#121925); +#121925 = AXIS2_PLACEMENT_3D('',#121926,#121927,#121928); +#121926 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#121927 = DIRECTION('',(0.,0.,1.)); +#121928 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121929 = ADVANCED_FACE('',(#121930),#121941,.T.); +#121930 = FACE_BOUND('',#121931,.T.); +#121931 = EDGE_LOOP('',(#121932,#121933,#121939,#121940)); +#121932 = ORIENTED_EDGE('',*,*,#119593,.T.); +#121933 = ORIENTED_EDGE('',*,*,#121934,.F.); +#121934 = EDGE_CURVE('',#119538,#119594,#121935,.T.); +#121935 = LINE('',#121936,#121937); +#121936 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#121937 = VECTOR('',#121938,1.); +#121938 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121939 = ORIENTED_EDGE('',*,*,#119545,.T.); +#121940 = ORIENTED_EDGE('',*,*,#119568,.T.); +#121941 = PLANE('',#121942); +#121942 = AXIS2_PLACEMENT_3D('',#121943,#121944,#121945); +#121943 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#121944 = DIRECTION('',(0.,0.,1.)); +#121945 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121946 = ADVANCED_FACE('',(#121947),#121990,.T.); +#121947 = FACE_BOUND('',#121948,.T.); +#121948 = EDGE_LOOP('',(#121949,#121950,#121958,#121966,#121974,#121982, + #121988,#121989)); +#121949 = ORIENTED_EDGE('',*,*,#119601,.F.); +#121950 = ORIENTED_EDGE('',*,*,#121951,.T.); +#121951 = EDGE_CURVE('',#119602,#121952,#121954,.T.); +#121952 = VERTEX_POINT('',#121953); +#121953 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#121954 = LINE('',#121955,#121956); +#121955 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#121956 = VECTOR('',#121957,1.); +#121957 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121958 = ORIENTED_EDGE('',*,*,#121959,.T.); +#121959 = EDGE_CURVE('',#121952,#121960,#121962,.T.); +#121960 = VERTEX_POINT('',#121961); +#121961 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#121962 = LINE('',#121963,#121964); +#121963 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#121964 = VECTOR('',#121965,1.); +#121965 = DIRECTION('',(0.,0.,-1.)); +#121966 = ORIENTED_EDGE('',*,*,#121967,.T.); +#121967 = EDGE_CURVE('',#121960,#121968,#121970,.T.); +#121968 = VERTEX_POINT('',#121969); +#121969 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#121970 = LINE('',#121971,#121972); +#121971 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#121972 = VECTOR('',#121973,1.); +#121973 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121974 = ORIENTED_EDGE('',*,*,#121975,.T.); +#121975 = EDGE_CURVE('',#121968,#121976,#121978,.T.); +#121976 = VERTEX_POINT('',#121977); +#121977 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#121978 = LINE('',#121979,#121980); +#121979 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#121980 = VECTOR('',#121981,1.); +#121981 = DIRECTION('',(0.,0.,1.)); +#121982 = ORIENTED_EDGE('',*,*,#121983,.T.); +#121983 = EDGE_CURVE('',#121976,#119530,#121984,.T.); +#121984 = LINE('',#121985,#121986); +#121985 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#121986 = VECTOR('',#121987,1.); +#121987 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121988 = ORIENTED_EDGE('',*,*,#119537,.F.); +#121989 = ORIENTED_EDGE('',*,*,#121934,.T.); +#121990 = PLANE('',#121991); +#121991 = AXIS2_PLACEMENT_3D('',#121992,#121993,#121994); +#121992 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#121993 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121994 = DIRECTION('',(0.,0.,1.)); +#121995 = ADVANCED_FACE('',(#121996),#122014,.T.); +#121996 = FACE_BOUND('',#121997,.T.); +#121997 = EDGE_LOOP('',(#121998,#122006,#122012,#122013)); +#121998 = ORIENTED_EDGE('',*,*,#121999,.T.); +#121999 = EDGE_CURVE('',#121976,#122000,#122002,.T.); +#122000 = VERTEX_POINT('',#122001); +#122001 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#122002 = LINE('',#122003,#122004); +#122003 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#122004 = VECTOR('',#122005,1.); +#122005 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122006 = ORIENTED_EDGE('',*,*,#122007,.T.); +#122007 = EDGE_CURVE('',#122000,#119522,#122008,.T.); +#122008 = LINE('',#122009,#122010); +#122009 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#122010 = VECTOR('',#122011,1.); +#122011 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122012 = ORIENTED_EDGE('',*,*,#119529,.F.); +#122013 = ORIENTED_EDGE('',*,*,#121983,.F.); +#122014 = PLANE('',#122015); +#122015 = AXIS2_PLACEMENT_3D('',#122016,#122017,#122018); +#122016 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#122017 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122018 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122019 = ADVANCED_FACE('',(#122020),#122056,.F.); +#122020 = FACE_BOUND('',#122021,.F.); +#122021 = EDGE_LOOP('',(#122022,#122023,#122031,#122039,#122047,#122053, + #122054,#122055)); +#122022 = ORIENTED_EDGE('',*,*,#119617,.F.); +#122023 = ORIENTED_EDGE('',*,*,#122024,.T.); +#122024 = EDGE_CURVE('',#119610,#122025,#122027,.T.); +#122025 = VERTEX_POINT('',#122026); +#122026 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#122027 = LINE('',#122028,#122029); +#122028 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#122029 = VECTOR('',#122030,1.); +#122030 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122031 = ORIENTED_EDGE('',*,*,#122032,.T.); +#122032 = EDGE_CURVE('',#122025,#122033,#122035,.T.); +#122033 = VERTEX_POINT('',#122034); +#122034 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#122035 = LINE('',#122036,#122037); +#122036 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#122037 = VECTOR('',#122038,1.); +#122038 = DIRECTION('',(0.,0.,-1.)); +#122039 = ORIENTED_EDGE('',*,*,#122040,.T.); +#122040 = EDGE_CURVE('',#122033,#122041,#122043,.T.); +#122041 = VERTEX_POINT('',#122042); +#122042 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#122043 = LINE('',#122044,#122045); +#122044 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#122045 = VECTOR('',#122046,1.); +#122046 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122047 = ORIENTED_EDGE('',*,*,#122048,.T.); +#122048 = EDGE_CURVE('',#122041,#122000,#122049,.T.); +#122049 = LINE('',#122050,#122051); +#122050 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#122051 = VECTOR('',#122052,1.); +#122052 = DIRECTION('',(0.,0.,1.)); +#122053 = ORIENTED_EDGE('',*,*,#122007,.T.); +#122054 = ORIENTED_EDGE('',*,*,#119521,.F.); +#122055 = ORIENTED_EDGE('',*,*,#121919,.T.); +#122056 = PLANE('',#122057); +#122057 = AXIS2_PLACEMENT_3D('',#122058,#122059,#122060); +#122058 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#122059 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122060 = DIRECTION('',(0.,0.,1.)); +#122061 = ADVANCED_FACE('',(#122062),#122073,.T.); +#122062 = FACE_BOUND('',#122063,.T.); +#122063 = EDGE_LOOP('',(#122064,#122065,#122066,#122072)); +#122064 = ORIENTED_EDGE('',*,*,#119609,.T.); +#122065 = ORIENTED_EDGE('',*,*,#122024,.T.); +#122066 = ORIENTED_EDGE('',*,*,#122067,.F.); +#122067 = EDGE_CURVE('',#121952,#122025,#122068,.T.); +#122068 = LINE('',#122069,#122070); +#122069 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#122070 = VECTOR('',#122071,1.); +#122071 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122072 = ORIENTED_EDGE('',*,*,#121951,.F.); +#122073 = PLANE('',#122074); +#122074 = AXIS2_PLACEMENT_3D('',#122075,#122076,#122077); +#122075 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#122076 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122077 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122078 = ADVANCED_FACE('',(#122079),#122090,.T.); +#122079 = FACE_BOUND('',#122080,.T.); +#122080 = EDGE_LOOP('',(#122081,#122082,#122083,#122084)); +#122081 = ORIENTED_EDGE('',*,*,#119785,.T.); +#122082 = ORIENTED_EDGE('',*,*,#119648,.T.); +#122083 = ORIENTED_EDGE('',*,*,#119673,.T.); +#122084 = ORIENTED_EDGE('',*,*,#122085,.T.); +#122085 = EDGE_CURVE('',#119674,#119778,#122086,.T.); +#122086 = LINE('',#122087,#122088); +#122087 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#122088 = VECTOR('',#122089,1.); +#122089 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122090 = PLANE('',#122091); +#122091 = AXIS2_PLACEMENT_3D('',#122092,#122093,#122094); +#122092 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#122093 = DIRECTION('',(0.,0.,1.)); +#122094 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122095 = ADVANCED_FACE('',(#122096),#122107,.T.); +#122096 = FACE_BOUND('',#122097,.T.); +#122097 = EDGE_LOOP('',(#122098,#122099,#122105,#122106)); +#122098 = ORIENTED_EDGE('',*,*,#119753,.T.); +#122099 = ORIENTED_EDGE('',*,*,#122100,.F.); +#122100 = EDGE_CURVE('',#119698,#119754,#122101,.T.); +#122101 = LINE('',#122102,#122103); +#122102 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#122103 = VECTOR('',#122104,1.); +#122104 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122105 = ORIENTED_EDGE('',*,*,#119705,.T.); +#122106 = ORIENTED_EDGE('',*,*,#119728,.T.); +#122107 = PLANE('',#122108); +#122108 = AXIS2_PLACEMENT_3D('',#122109,#122110,#122111); +#122109 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#122110 = DIRECTION('',(0.,0.,1.)); +#122111 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122112 = ADVANCED_FACE('',(#122113),#122156,.T.); +#122113 = FACE_BOUND('',#122114,.T.); +#122114 = EDGE_LOOP('',(#122115,#122116,#122124,#122132,#122140,#122148, + #122154,#122155)); +#122115 = ORIENTED_EDGE('',*,*,#119761,.F.); +#122116 = ORIENTED_EDGE('',*,*,#122117,.T.); +#122117 = EDGE_CURVE('',#119762,#122118,#122120,.T.); +#122118 = VERTEX_POINT('',#122119); +#122119 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122120 = LINE('',#122121,#122122); +#122121 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#122122 = VECTOR('',#122123,1.); +#122123 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122124 = ORIENTED_EDGE('',*,*,#122125,.T.); +#122125 = EDGE_CURVE('',#122118,#122126,#122128,.T.); +#122126 = VERTEX_POINT('',#122127); +#122127 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122128 = LINE('',#122129,#122130); +#122129 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122130 = VECTOR('',#122131,1.); +#122131 = DIRECTION('',(0.,0.,-1.)); +#122132 = ORIENTED_EDGE('',*,*,#122133,.T.); +#122133 = EDGE_CURVE('',#122126,#122134,#122136,.T.); +#122134 = VERTEX_POINT('',#122135); +#122135 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122136 = LINE('',#122137,#122138); +#122137 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122138 = VECTOR('',#122139,1.); +#122139 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122140 = ORIENTED_EDGE('',*,*,#122141,.T.); +#122141 = EDGE_CURVE('',#122134,#122142,#122144,.T.); +#122142 = VERTEX_POINT('',#122143); +#122143 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122144 = LINE('',#122145,#122146); +#122145 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122146 = VECTOR('',#122147,1.); +#122147 = DIRECTION('',(0.,0.,1.)); +#122148 = ORIENTED_EDGE('',*,*,#122149,.T.); +#122149 = EDGE_CURVE('',#122142,#119690,#122150,.T.); +#122150 = LINE('',#122151,#122152); +#122151 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122152 = VECTOR('',#122153,1.); +#122153 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122154 = ORIENTED_EDGE('',*,*,#119697,.F.); +#122155 = ORIENTED_EDGE('',*,*,#122100,.T.); +#122156 = PLANE('',#122157); +#122157 = AXIS2_PLACEMENT_3D('',#122158,#122159,#122160); +#122158 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#122159 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122160 = DIRECTION('',(0.,0.,1.)); +#122161 = ADVANCED_FACE('',(#122162),#122180,.T.); +#122162 = FACE_BOUND('',#122163,.T.); +#122163 = EDGE_LOOP('',(#122164,#122172,#122178,#122179)); +#122164 = ORIENTED_EDGE('',*,*,#122165,.T.); +#122165 = EDGE_CURVE('',#122142,#122166,#122168,.T.); +#122166 = VERTEX_POINT('',#122167); +#122167 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#122168 = LINE('',#122169,#122170); +#122169 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122170 = VECTOR('',#122171,1.); +#122171 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122172 = ORIENTED_EDGE('',*,*,#122173,.T.); +#122173 = EDGE_CURVE('',#122166,#119682,#122174,.T.); +#122174 = LINE('',#122175,#122176); +#122175 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#122176 = VECTOR('',#122177,1.); +#122177 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122178 = ORIENTED_EDGE('',*,*,#119689,.F.); +#122179 = ORIENTED_EDGE('',*,*,#122149,.F.); +#122180 = PLANE('',#122181); +#122181 = AXIS2_PLACEMENT_3D('',#122182,#122183,#122184); +#122182 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122183 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122184 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122185 = ADVANCED_FACE('',(#122186),#122222,.F.); +#122186 = FACE_BOUND('',#122187,.F.); +#122187 = EDGE_LOOP('',(#122188,#122189,#122197,#122205,#122213,#122219, + #122220,#122221)); +#122188 = ORIENTED_EDGE('',*,*,#119777,.F.); +#122189 = ORIENTED_EDGE('',*,*,#122190,.T.); +#122190 = EDGE_CURVE('',#119770,#122191,#122193,.T.); +#122191 = VERTEX_POINT('',#122192); +#122192 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#122193 = LINE('',#122194,#122195); +#122194 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#122195 = VECTOR('',#122196,1.); +#122196 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122197 = ORIENTED_EDGE('',*,*,#122198,.T.); +#122198 = EDGE_CURVE('',#122191,#122199,#122201,.T.); +#122199 = VERTEX_POINT('',#122200); +#122200 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#122201 = LINE('',#122202,#122203); +#122202 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#122203 = VECTOR('',#122204,1.); +#122204 = DIRECTION('',(0.,0.,-1.)); +#122205 = ORIENTED_EDGE('',*,*,#122206,.T.); +#122206 = EDGE_CURVE('',#122199,#122207,#122209,.T.); +#122207 = VERTEX_POINT('',#122208); +#122208 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#122209 = LINE('',#122210,#122211); +#122210 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#122211 = VECTOR('',#122212,1.); +#122212 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122213 = ORIENTED_EDGE('',*,*,#122214,.T.); +#122214 = EDGE_CURVE('',#122207,#122166,#122215,.T.); +#122215 = LINE('',#122216,#122217); +#122216 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#122217 = VECTOR('',#122218,1.); +#122218 = DIRECTION('',(0.,0.,1.)); +#122219 = ORIENTED_EDGE('',*,*,#122173,.T.); +#122220 = ORIENTED_EDGE('',*,*,#119681,.F.); +#122221 = ORIENTED_EDGE('',*,*,#122085,.T.); +#122222 = PLANE('',#122223); +#122223 = AXIS2_PLACEMENT_3D('',#122224,#122225,#122226); +#122224 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#122225 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122226 = DIRECTION('',(0.,0.,1.)); +#122227 = ADVANCED_FACE('',(#122228),#122239,.T.); +#122228 = FACE_BOUND('',#122229,.T.); +#122229 = EDGE_LOOP('',(#122230,#122231,#122232,#122238)); +#122230 = ORIENTED_EDGE('',*,*,#119769,.T.); +#122231 = ORIENTED_EDGE('',*,*,#122190,.T.); +#122232 = ORIENTED_EDGE('',*,*,#122233,.F.); +#122233 = EDGE_CURVE('',#122118,#122191,#122234,.T.); +#122234 = LINE('',#122235,#122236); +#122235 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122236 = VECTOR('',#122237,1.); +#122237 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122238 = ORIENTED_EDGE('',*,*,#122117,.F.); +#122239 = PLANE('',#122240); +#122240 = AXIS2_PLACEMENT_3D('',#122241,#122242,#122243); +#122241 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#122242 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122243 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122244 = ADVANCED_FACE('',(#122245),#122256,.T.); +#122245 = FACE_BOUND('',#122246,.T.); +#122246 = EDGE_LOOP('',(#122247,#122248,#122249,#122250)); +#122247 = ORIENTED_EDGE('',*,*,#119945,.T.); +#122248 = ORIENTED_EDGE('',*,*,#119808,.T.); +#122249 = ORIENTED_EDGE('',*,*,#119833,.T.); +#122250 = ORIENTED_EDGE('',*,*,#122251,.T.); +#122251 = EDGE_CURVE('',#119834,#119938,#122252,.T.); +#122252 = LINE('',#122253,#122254); +#122253 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#122254 = VECTOR('',#122255,1.); +#122255 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122256 = PLANE('',#122257); +#122257 = AXIS2_PLACEMENT_3D('',#122258,#122259,#122260); +#122258 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#122259 = DIRECTION('',(0.,0.,1.)); +#122260 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122261 = ADVANCED_FACE('',(#122262),#122273,.T.); +#122262 = FACE_BOUND('',#122263,.T.); +#122263 = EDGE_LOOP('',(#122264,#122265,#122271,#122272)); +#122264 = ORIENTED_EDGE('',*,*,#119913,.T.); +#122265 = ORIENTED_EDGE('',*,*,#122266,.F.); +#122266 = EDGE_CURVE('',#119858,#119914,#122267,.T.); +#122267 = LINE('',#122268,#122269); +#122268 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#122269 = VECTOR('',#122270,1.); +#122270 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122271 = ORIENTED_EDGE('',*,*,#119865,.T.); +#122272 = ORIENTED_EDGE('',*,*,#119888,.T.); +#122273 = PLANE('',#122274); +#122274 = AXIS2_PLACEMENT_3D('',#122275,#122276,#122277); +#122275 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#122276 = DIRECTION('',(0.,0.,1.)); +#122277 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122278 = ADVANCED_FACE('',(#122279),#122322,.T.); +#122279 = FACE_BOUND('',#122280,.T.); +#122280 = EDGE_LOOP('',(#122281,#122282,#122290,#122298,#122306,#122314, + #122320,#122321)); +#122281 = ORIENTED_EDGE('',*,*,#119921,.F.); +#122282 = ORIENTED_EDGE('',*,*,#122283,.T.); +#122283 = EDGE_CURVE('',#119922,#122284,#122286,.T.); +#122284 = VERTEX_POINT('',#122285); +#122285 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122286 = LINE('',#122287,#122288); +#122287 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#122288 = VECTOR('',#122289,1.); +#122289 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122290 = ORIENTED_EDGE('',*,*,#122291,.T.); +#122291 = EDGE_CURVE('',#122284,#122292,#122294,.T.); +#122292 = VERTEX_POINT('',#122293); +#122293 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122294 = LINE('',#122295,#122296); +#122295 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122296 = VECTOR('',#122297,1.); +#122297 = DIRECTION('',(0.,0.,-1.)); +#122298 = ORIENTED_EDGE('',*,*,#122299,.T.); +#122299 = EDGE_CURVE('',#122292,#122300,#122302,.T.); +#122300 = VERTEX_POINT('',#122301); +#122301 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122302 = LINE('',#122303,#122304); +#122303 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122304 = VECTOR('',#122305,1.); +#122305 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122306 = ORIENTED_EDGE('',*,*,#122307,.T.); +#122307 = EDGE_CURVE('',#122300,#122308,#122310,.T.); +#122308 = VERTEX_POINT('',#122309); +#122309 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122310 = LINE('',#122311,#122312); +#122311 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122312 = VECTOR('',#122313,1.); +#122313 = DIRECTION('',(0.,0.,1.)); +#122314 = ORIENTED_EDGE('',*,*,#122315,.T.); +#122315 = EDGE_CURVE('',#122308,#119850,#122316,.T.); +#122316 = LINE('',#122317,#122318); +#122317 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122318 = VECTOR('',#122319,1.); +#122319 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122320 = ORIENTED_EDGE('',*,*,#119857,.F.); +#122321 = ORIENTED_EDGE('',*,*,#122266,.T.); +#122322 = PLANE('',#122323); +#122323 = AXIS2_PLACEMENT_3D('',#122324,#122325,#122326); +#122324 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#122325 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122326 = DIRECTION('',(0.,0.,1.)); +#122327 = ADVANCED_FACE('',(#122328),#122346,.T.); +#122328 = FACE_BOUND('',#122329,.T.); +#122329 = EDGE_LOOP('',(#122330,#122338,#122344,#122345)); +#122330 = ORIENTED_EDGE('',*,*,#122331,.T.); +#122331 = EDGE_CURVE('',#122308,#122332,#122334,.T.); +#122332 = VERTEX_POINT('',#122333); +#122333 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#122334 = LINE('',#122335,#122336); +#122335 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122336 = VECTOR('',#122337,1.); +#122337 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122338 = ORIENTED_EDGE('',*,*,#122339,.T.); +#122339 = EDGE_CURVE('',#122332,#119842,#122340,.T.); +#122340 = LINE('',#122341,#122342); +#122341 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#122342 = VECTOR('',#122343,1.); +#122343 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122344 = ORIENTED_EDGE('',*,*,#119849,.F.); +#122345 = ORIENTED_EDGE('',*,*,#122315,.F.); +#122346 = PLANE('',#122347); +#122347 = AXIS2_PLACEMENT_3D('',#122348,#122349,#122350); +#122348 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122349 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122350 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122351 = ADVANCED_FACE('',(#122352),#122388,.F.); +#122352 = FACE_BOUND('',#122353,.F.); +#122353 = EDGE_LOOP('',(#122354,#122355,#122363,#122371,#122379,#122385, + #122386,#122387)); +#122354 = ORIENTED_EDGE('',*,*,#119937,.F.); +#122355 = ORIENTED_EDGE('',*,*,#122356,.T.); +#122356 = EDGE_CURVE('',#119930,#122357,#122359,.T.); +#122357 = VERTEX_POINT('',#122358); +#122358 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#122359 = LINE('',#122360,#122361); +#122360 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#122361 = VECTOR('',#122362,1.); +#122362 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122363 = ORIENTED_EDGE('',*,*,#122364,.T.); +#122364 = EDGE_CURVE('',#122357,#122365,#122367,.T.); +#122365 = VERTEX_POINT('',#122366); +#122366 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#122367 = LINE('',#122368,#122369); +#122368 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#122369 = VECTOR('',#122370,1.); +#122370 = DIRECTION('',(0.,0.,-1.)); +#122371 = ORIENTED_EDGE('',*,*,#122372,.T.); +#122372 = EDGE_CURVE('',#122365,#122373,#122375,.T.); +#122373 = VERTEX_POINT('',#122374); +#122374 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#122375 = LINE('',#122376,#122377); +#122376 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#122377 = VECTOR('',#122378,1.); +#122378 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122379 = ORIENTED_EDGE('',*,*,#122380,.T.); +#122380 = EDGE_CURVE('',#122373,#122332,#122381,.T.); +#122381 = LINE('',#122382,#122383); +#122382 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#122383 = VECTOR('',#122384,1.); +#122384 = DIRECTION('',(0.,0.,1.)); +#122385 = ORIENTED_EDGE('',*,*,#122339,.T.); +#122386 = ORIENTED_EDGE('',*,*,#119841,.F.); +#122387 = ORIENTED_EDGE('',*,*,#122251,.T.); +#122388 = PLANE('',#122389); +#122389 = AXIS2_PLACEMENT_3D('',#122390,#122391,#122392); +#122390 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#122391 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122392 = DIRECTION('',(0.,0.,1.)); +#122393 = ADVANCED_FACE('',(#122394),#122405,.T.); +#122394 = FACE_BOUND('',#122395,.T.); +#122395 = EDGE_LOOP('',(#122396,#122397,#122398,#122404)); +#122396 = ORIENTED_EDGE('',*,*,#119929,.T.); +#122397 = ORIENTED_EDGE('',*,*,#122356,.T.); +#122398 = ORIENTED_EDGE('',*,*,#122399,.F.); +#122399 = EDGE_CURVE('',#122284,#122357,#122400,.T.); +#122400 = LINE('',#122401,#122402); +#122401 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122402 = VECTOR('',#122403,1.); +#122403 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122404 = ORIENTED_EDGE('',*,*,#122283,.F.); +#122405 = PLANE('',#122406); +#122406 = AXIS2_PLACEMENT_3D('',#122407,#122408,#122409); +#122407 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#122408 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122409 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122410 = ADVANCED_FACE('',(#122411),#122422,.T.); +#122411 = FACE_BOUND('',#122412,.T.); +#122412 = EDGE_LOOP('',(#122413,#122414,#122415,#122416)); +#122413 = ORIENTED_EDGE('',*,*,#120105,.T.); +#122414 = ORIENTED_EDGE('',*,*,#119968,.T.); +#122415 = ORIENTED_EDGE('',*,*,#119993,.T.); +#122416 = ORIENTED_EDGE('',*,*,#122417,.T.); +#122417 = EDGE_CURVE('',#119994,#120098,#122418,.T.); +#122418 = LINE('',#122419,#122420); +#122419 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,0.9)); +#122420 = VECTOR('',#122421,1.); +#122421 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122422 = PLANE('',#122423); +#122423 = AXIS2_PLACEMENT_3D('',#122424,#122425,#122426); +#122424 = CARTESIAN_POINT('',(-9.367506770275E-17,1.040002169969E-32,0.9 + )); +#122425 = DIRECTION('',(0.,0.,1.)); +#122426 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122427 = ADVANCED_FACE('',(#122428),#122439,.T.); +#122428 = FACE_BOUND('',#122429,.T.); +#122429 = EDGE_LOOP('',(#122430,#122431,#122437,#122438)); +#122430 = ORIENTED_EDGE('',*,*,#120073,.T.); +#122431 = ORIENTED_EDGE('',*,*,#122432,.F.); +#122432 = EDGE_CURVE('',#120018,#120074,#122433,.T.); +#122433 = LINE('',#122434,#122435); +#122434 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,0.9)); +#122435 = VECTOR('',#122436,1.); +#122436 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122437 = ORIENTED_EDGE('',*,*,#120025,.T.); +#122438 = ORIENTED_EDGE('',*,*,#120048,.T.); +#122439 = PLANE('',#122440); +#122440 = AXIS2_PLACEMENT_3D('',#122441,#122442,#122443); +#122441 = CARTESIAN_POINT('',(-9.367506770275E-17,1.040002169969E-32,0.9 + )); +#122442 = DIRECTION('',(0.,0.,1.)); +#122443 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122444 = ADVANCED_FACE('',(#122445),#122488,.T.); +#122445 = FACE_BOUND('',#122446,.T.); +#122446 = EDGE_LOOP('',(#122447,#122448,#122456,#122464,#122472,#122480, + #122486,#122487)); +#122447 = ORIENTED_EDGE('',*,*,#120081,.F.); +#122448 = ORIENTED_EDGE('',*,*,#122449,.T.); +#122449 = EDGE_CURVE('',#120082,#122450,#122452,.T.); +#122450 = VERTEX_POINT('',#122451); +#122451 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#122452 = LINE('',#122453,#122454); +#122453 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#122454 = VECTOR('',#122455,1.); +#122455 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122456 = ORIENTED_EDGE('',*,*,#122457,.T.); +#122457 = EDGE_CURVE('',#122450,#122458,#122460,.T.); +#122458 = VERTEX_POINT('',#122459); +#122459 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#122460 = LINE('',#122461,#122462); +#122461 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#122462 = VECTOR('',#122463,1.); +#122463 = DIRECTION('',(0.,0.,-1.)); +#122464 = ORIENTED_EDGE('',*,*,#122465,.T.); +#122465 = EDGE_CURVE('',#122458,#122466,#122468,.T.); +#122466 = VERTEX_POINT('',#122467); +#122467 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#122468 = LINE('',#122469,#122470); +#122469 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#122470 = VECTOR('',#122471,1.); +#122471 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122472 = ORIENTED_EDGE('',*,*,#122473,.T.); +#122473 = EDGE_CURVE('',#122466,#122474,#122476,.T.); +#122474 = VERTEX_POINT('',#122475); +#122475 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122476 = LINE('',#122477,#122478); +#122477 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#122478 = VECTOR('',#122479,1.); +#122479 = DIRECTION('',(0.,0.,1.)); +#122480 = ORIENTED_EDGE('',*,*,#122481,.T.); +#122481 = EDGE_CURVE('',#122474,#120010,#122482,.T.); +#122482 = LINE('',#122483,#122484); +#122483 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122484 = VECTOR('',#122485,1.); +#122485 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122486 = ORIENTED_EDGE('',*,*,#120017,.F.); +#122487 = ORIENTED_EDGE('',*,*,#122432,.T.); +#122488 = PLANE('',#122489); +#122489 = AXIS2_PLACEMENT_3D('',#122490,#122491,#122492); +#122490 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#122491 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122492 = DIRECTION('',(0.,0.,1.)); +#122493 = ADVANCED_FACE('',(#122494),#122512,.T.); +#122494 = FACE_BOUND('',#122495,.T.); +#122495 = EDGE_LOOP('',(#122496,#122504,#122510,#122511)); +#122496 = ORIENTED_EDGE('',*,*,#122497,.T.); +#122497 = EDGE_CURVE('',#122474,#122498,#122500,.T.); +#122498 = VERTEX_POINT('',#122499); +#122499 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#122500 = LINE('',#122501,#122502); +#122501 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122502 = VECTOR('',#122503,1.); +#122503 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122504 = ORIENTED_EDGE('',*,*,#122505,.T.); +#122505 = EDGE_CURVE('',#122498,#120002,#122506,.T.); +#122506 = LINE('',#122507,#122508); +#122507 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#122508 = VECTOR('',#122509,1.); +#122509 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122510 = ORIENTED_EDGE('',*,*,#120009,.F.); +#122511 = ORIENTED_EDGE('',*,*,#122481,.F.); +#122512 = PLANE('',#122513); +#122513 = AXIS2_PLACEMENT_3D('',#122514,#122515,#122516); +#122514 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122515 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122516 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122517 = ADVANCED_FACE('',(#122518),#122554,.F.); +#122518 = FACE_BOUND('',#122519,.F.); +#122519 = EDGE_LOOP('',(#122520,#122521,#122529,#122537,#122545,#122551, + #122552,#122553)); +#122520 = ORIENTED_EDGE('',*,*,#120097,.F.); +#122521 = ORIENTED_EDGE('',*,*,#122522,.T.); +#122522 = EDGE_CURVE('',#120090,#122523,#122525,.T.); +#122523 = VERTEX_POINT('',#122524); +#122524 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#122525 = LINE('',#122526,#122527); +#122526 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#122527 = VECTOR('',#122528,1.); +#122528 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122529 = ORIENTED_EDGE('',*,*,#122530,.T.); +#122530 = EDGE_CURVE('',#122523,#122531,#122533,.T.); +#122531 = VERTEX_POINT('',#122532); +#122532 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#122533 = LINE('',#122534,#122535); +#122534 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#122535 = VECTOR('',#122536,1.); +#122536 = DIRECTION('',(0.,0.,-1.)); +#122537 = ORIENTED_EDGE('',*,*,#122538,.T.); +#122538 = EDGE_CURVE('',#122531,#122539,#122541,.T.); +#122539 = VERTEX_POINT('',#122540); +#122540 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#122541 = LINE('',#122542,#122543); +#122542 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#122543 = VECTOR('',#122544,1.); +#122544 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122545 = ORIENTED_EDGE('',*,*,#122546,.T.); +#122546 = EDGE_CURVE('',#122539,#122498,#122547,.T.); +#122547 = LINE('',#122548,#122549); +#122548 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#122549 = VECTOR('',#122550,1.); +#122550 = DIRECTION('',(0.,0.,1.)); +#122551 = ORIENTED_EDGE('',*,*,#122505,.T.); +#122552 = ORIENTED_EDGE('',*,*,#120001,.F.); +#122553 = ORIENTED_EDGE('',*,*,#122417,.T.); +#122554 = PLANE('',#122555); +#122555 = AXIS2_PLACEMENT_3D('',#122556,#122557,#122558); +#122556 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#122557 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122558 = DIRECTION('',(0.,0.,1.)); +#122559 = ADVANCED_FACE('',(#122560),#122571,.T.); +#122560 = FACE_BOUND('',#122561,.T.); +#122561 = EDGE_LOOP('',(#122562,#122563,#122564,#122570)); +#122562 = ORIENTED_EDGE('',*,*,#120089,.T.); +#122563 = ORIENTED_EDGE('',*,*,#122522,.T.); +#122564 = ORIENTED_EDGE('',*,*,#122565,.F.); +#122565 = EDGE_CURVE('',#122450,#122523,#122566,.T.); +#122566 = LINE('',#122567,#122568); +#122567 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#122568 = VECTOR('',#122569,1.); +#122569 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122570 = ORIENTED_EDGE('',*,*,#122449,.F.); +#122571 = PLANE('',#122572); +#122572 = AXIS2_PLACEMENT_3D('',#122573,#122574,#122575); +#122573 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#122574 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122575 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122576 = ADVANCED_FACE('',(#122577),#122588,.T.); +#122577 = FACE_BOUND('',#122578,.T.); +#122578 = EDGE_LOOP('',(#122579,#122585,#122586,#122587)); +#122579 = ORIENTED_EDGE('',*,*,#122580,.T.); +#122580 = EDGE_CURVE('',#120972,#121045,#122581,.T.); +#122581 = LINE('',#122582,#122583); +#122582 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#122583 = VECTOR('',#122584,1.); +#122584 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122585 = ORIENTED_EDGE('',*,*,#121052,.T.); +#122586 = ORIENTED_EDGE('',*,*,#121003,.F.); +#122587 = ORIENTED_EDGE('',*,*,#120979,.F.); +#122588 = PLANE('',#122589); +#122589 = AXIS2_PLACEMENT_3D('',#122590,#122591,#122592); +#122590 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#122591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122592 = DIRECTION('',(0.,0.,1.)); +#122593 = ADVANCED_FACE('',(#122594),#122605,.T.); +#122594 = FACE_BOUND('',#122595,.T.); +#122595 = EDGE_LOOP('',(#122596,#122602,#122603,#122604)); +#122596 = ORIENTED_EDGE('',*,*,#122597,.T.); +#122597 = EDGE_CURVE('',#120964,#121037,#122598,.T.); +#122598 = LINE('',#122599,#122600); +#122599 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#122600 = VECTOR('',#122601,1.); +#122601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122602 = ORIENTED_EDGE('',*,*,#121044,.T.); +#122603 = ORIENTED_EDGE('',*,*,#122580,.F.); +#122604 = ORIENTED_EDGE('',*,*,#120971,.F.); +#122605 = PLANE('',#122606); +#122606 = AXIS2_PLACEMENT_3D('',#122607,#122608,#122609); +#122607 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#122608 = DIRECTION('',(0.,0.,1.)); +#122609 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122610 = ADVANCED_FACE('',(#122611),#122617,.T.); +#122611 = FACE_BOUND('',#122612,.T.); +#122612 = EDGE_LOOP('',(#122613,#122614,#122615,#122616)); +#122613 = ORIENTED_EDGE('',*,*,#121071,.T.); +#122614 = ORIENTED_EDGE('',*,*,#121036,.T.); +#122615 = ORIENTED_EDGE('',*,*,#122597,.F.); +#122616 = ORIENTED_EDGE('',*,*,#120963,.F.); +#122617 = PLANE('',#122618); +#122618 = AXIS2_PLACEMENT_3D('',#122619,#122620,#122621); +#122619 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#122620 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122621 = DIRECTION('',(0.,0.,-1.)); +#122622 = ADVANCED_FACE('',(#122623),#122634,.T.); +#122623 = FACE_BOUND('',#122624,.T.); +#122624 = EDGE_LOOP('',(#122625,#122631,#122632,#122633)); +#122625 = ORIENTED_EDGE('',*,*,#122626,.T.); +#122626 = EDGE_CURVE('',#121138,#121211,#122627,.T.); +#122627 = LINE('',#122628,#122629); +#122628 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#122629 = VECTOR('',#122630,1.); +#122630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122631 = ORIENTED_EDGE('',*,*,#121218,.T.); +#122632 = ORIENTED_EDGE('',*,*,#121169,.F.); +#122633 = ORIENTED_EDGE('',*,*,#121145,.F.); +#122634 = PLANE('',#122635); +#122635 = AXIS2_PLACEMENT_3D('',#122636,#122637,#122638); +#122636 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#122637 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122638 = DIRECTION('',(0.,0.,1.)); +#122639 = ADVANCED_FACE('',(#122640),#122651,.T.); +#122640 = FACE_BOUND('',#122641,.T.); +#122641 = EDGE_LOOP('',(#122642,#122648,#122649,#122650)); +#122642 = ORIENTED_EDGE('',*,*,#122643,.T.); +#122643 = EDGE_CURVE('',#121130,#121203,#122644,.T.); +#122644 = LINE('',#122645,#122646); +#122645 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#122646 = VECTOR('',#122647,1.); +#122647 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122648 = ORIENTED_EDGE('',*,*,#121210,.T.); +#122649 = ORIENTED_EDGE('',*,*,#122626,.F.); +#122650 = ORIENTED_EDGE('',*,*,#121137,.F.); +#122651 = PLANE('',#122652); +#122652 = AXIS2_PLACEMENT_3D('',#122653,#122654,#122655); +#122653 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#122654 = DIRECTION('',(0.,0.,1.)); +#122655 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122656 = ADVANCED_FACE('',(#122657),#122663,.T.); +#122657 = FACE_BOUND('',#122658,.T.); +#122658 = EDGE_LOOP('',(#122659,#122660,#122661,#122662)); +#122659 = ORIENTED_EDGE('',*,*,#121237,.T.); +#122660 = ORIENTED_EDGE('',*,*,#121202,.T.); +#122661 = ORIENTED_EDGE('',*,*,#122643,.F.); +#122662 = ORIENTED_EDGE('',*,*,#121129,.F.); +#122663 = PLANE('',#122664); +#122664 = AXIS2_PLACEMENT_3D('',#122665,#122666,#122667); +#122665 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#122666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122667 = DIRECTION('',(0.,0.,-1.)); +#122668 = ADVANCED_FACE('',(#122669),#122680,.T.); +#122669 = FACE_BOUND('',#122670,.T.); +#122670 = EDGE_LOOP('',(#122671,#122677,#122678,#122679)); +#122671 = ORIENTED_EDGE('',*,*,#122672,.T.); +#122672 = EDGE_CURVE('',#121304,#121377,#122673,.T.); +#122673 = LINE('',#122674,#122675); +#122674 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#122675 = VECTOR('',#122676,1.); +#122676 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122677 = ORIENTED_EDGE('',*,*,#121384,.T.); +#122678 = ORIENTED_EDGE('',*,*,#121335,.F.); +#122679 = ORIENTED_EDGE('',*,*,#121311,.F.); +#122680 = PLANE('',#122681); +#122681 = AXIS2_PLACEMENT_3D('',#122682,#122683,#122684); +#122682 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#122683 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122684 = DIRECTION('',(0.,0.,1.)); +#122685 = ADVANCED_FACE('',(#122686),#122697,.T.); +#122686 = FACE_BOUND('',#122687,.T.); +#122687 = EDGE_LOOP('',(#122688,#122694,#122695,#122696)); +#122688 = ORIENTED_EDGE('',*,*,#122689,.T.); +#122689 = EDGE_CURVE('',#121296,#121369,#122690,.T.); +#122690 = LINE('',#122691,#122692); +#122691 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#122692 = VECTOR('',#122693,1.); +#122693 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122694 = ORIENTED_EDGE('',*,*,#121376,.T.); +#122695 = ORIENTED_EDGE('',*,*,#122672,.F.); +#122696 = ORIENTED_EDGE('',*,*,#121303,.F.); +#122697 = PLANE('',#122698); +#122698 = AXIS2_PLACEMENT_3D('',#122699,#122700,#122701); +#122699 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#122700 = DIRECTION('',(0.,0.,1.)); +#122701 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122702 = ADVANCED_FACE('',(#122703),#122709,.T.); +#122703 = FACE_BOUND('',#122704,.T.); +#122704 = EDGE_LOOP('',(#122705,#122706,#122707,#122708)); +#122705 = ORIENTED_EDGE('',*,*,#121403,.T.); +#122706 = ORIENTED_EDGE('',*,*,#121368,.T.); +#122707 = ORIENTED_EDGE('',*,*,#122689,.F.); +#122708 = ORIENTED_EDGE('',*,*,#121295,.F.); +#122709 = PLANE('',#122710); +#122710 = AXIS2_PLACEMENT_3D('',#122711,#122712,#122713); +#122711 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#122712 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122713 = DIRECTION('',(0.,0.,-1.)); +#122714 = ADVANCED_FACE('',(#122715),#122726,.T.); +#122715 = FACE_BOUND('',#122716,.T.); +#122716 = EDGE_LOOP('',(#122717,#122723,#122724,#122725)); +#122717 = ORIENTED_EDGE('',*,*,#122718,.T.); +#122718 = EDGE_CURVE('',#121470,#121543,#122719,.T.); +#122719 = LINE('',#122720,#122721); +#122720 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#122721 = VECTOR('',#122722,1.); +#122722 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122723 = ORIENTED_EDGE('',*,*,#121550,.T.); +#122724 = ORIENTED_EDGE('',*,*,#121501,.F.); +#122725 = ORIENTED_EDGE('',*,*,#121477,.F.); +#122726 = PLANE('',#122727); +#122727 = AXIS2_PLACEMENT_3D('',#122728,#122729,#122730); +#122728 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#122729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122730 = DIRECTION('',(0.,0.,1.)); +#122731 = ADVANCED_FACE('',(#122732),#122743,.T.); +#122732 = FACE_BOUND('',#122733,.T.); +#122733 = EDGE_LOOP('',(#122734,#122740,#122741,#122742)); +#122734 = ORIENTED_EDGE('',*,*,#122735,.T.); +#122735 = EDGE_CURVE('',#121462,#121535,#122736,.T.); +#122736 = LINE('',#122737,#122738); +#122737 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#122738 = VECTOR('',#122739,1.); +#122739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122740 = ORIENTED_EDGE('',*,*,#121542,.T.); +#122741 = ORIENTED_EDGE('',*,*,#122718,.F.); +#122742 = ORIENTED_EDGE('',*,*,#121469,.F.); +#122743 = PLANE('',#122744); +#122744 = AXIS2_PLACEMENT_3D('',#122745,#122746,#122747); +#122745 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#122746 = DIRECTION('',(0.,0.,1.)); +#122747 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122748 = ADVANCED_FACE('',(#122749),#122755,.T.); +#122749 = FACE_BOUND('',#122750,.T.); +#122750 = EDGE_LOOP('',(#122751,#122752,#122753,#122754)); +#122751 = ORIENTED_EDGE('',*,*,#121569,.T.); +#122752 = ORIENTED_EDGE('',*,*,#121534,.T.); +#122753 = ORIENTED_EDGE('',*,*,#122735,.F.); +#122754 = ORIENTED_EDGE('',*,*,#121461,.F.); +#122755 = PLANE('',#122756); +#122756 = AXIS2_PLACEMENT_3D('',#122757,#122758,#122759); +#122757 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#122758 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122759 = DIRECTION('',(0.,0.,-1.)); +#122760 = ADVANCED_FACE('',(#122761),#122772,.T.); +#122761 = FACE_BOUND('',#122762,.T.); +#122762 = EDGE_LOOP('',(#122763,#122769,#122770,#122771)); +#122763 = ORIENTED_EDGE('',*,*,#122764,.T.); +#122764 = EDGE_CURVE('',#121636,#121709,#122765,.T.); +#122765 = LINE('',#122766,#122767); +#122766 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#122767 = VECTOR('',#122768,1.); +#122768 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122769 = ORIENTED_EDGE('',*,*,#121716,.T.); +#122770 = ORIENTED_EDGE('',*,*,#121667,.F.); +#122771 = ORIENTED_EDGE('',*,*,#121643,.F.); +#122772 = PLANE('',#122773); +#122773 = AXIS2_PLACEMENT_3D('',#122774,#122775,#122776); +#122774 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#122775 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122776 = DIRECTION('',(0.,0.,1.)); +#122777 = ADVANCED_FACE('',(#122778),#122789,.T.); +#122778 = FACE_BOUND('',#122779,.T.); +#122779 = EDGE_LOOP('',(#122780,#122786,#122787,#122788)); +#122780 = ORIENTED_EDGE('',*,*,#122781,.T.); +#122781 = EDGE_CURVE('',#121628,#121701,#122782,.T.); +#122782 = LINE('',#122783,#122784); +#122783 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#122784 = VECTOR('',#122785,1.); +#122785 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122786 = ORIENTED_EDGE('',*,*,#121708,.T.); +#122787 = ORIENTED_EDGE('',*,*,#122764,.F.); +#122788 = ORIENTED_EDGE('',*,*,#121635,.F.); +#122789 = PLANE('',#122790); +#122790 = AXIS2_PLACEMENT_3D('',#122791,#122792,#122793); +#122791 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#122792 = DIRECTION('',(0.,0.,1.)); +#122793 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122794 = ADVANCED_FACE('',(#122795),#122801,.T.); +#122795 = FACE_BOUND('',#122796,.T.); +#122796 = EDGE_LOOP('',(#122797,#122798,#122799,#122800)); +#122797 = ORIENTED_EDGE('',*,*,#121735,.T.); +#122798 = ORIENTED_EDGE('',*,*,#121700,.T.); +#122799 = ORIENTED_EDGE('',*,*,#122781,.F.); +#122800 = ORIENTED_EDGE('',*,*,#121627,.F.); +#122801 = PLANE('',#122802); +#122802 = AXIS2_PLACEMENT_3D('',#122803,#122804,#122805); +#122803 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#122804 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122805 = DIRECTION('',(0.,0.,-1.)); +#122806 = ADVANCED_FACE('',(#122807),#122818,.T.); +#122807 = FACE_BOUND('',#122808,.T.); +#122808 = EDGE_LOOP('',(#122809,#122815,#122816,#122817)); +#122809 = ORIENTED_EDGE('',*,*,#122810,.T.); +#122810 = EDGE_CURVE('',#121802,#121875,#122811,.T.); +#122811 = LINE('',#122812,#122813); +#122812 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#122813 = VECTOR('',#122814,1.); +#122814 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122815 = ORIENTED_EDGE('',*,*,#121882,.T.); +#122816 = ORIENTED_EDGE('',*,*,#121833,.F.); +#122817 = ORIENTED_EDGE('',*,*,#121809,.F.); +#122818 = PLANE('',#122819); +#122819 = AXIS2_PLACEMENT_3D('',#122820,#122821,#122822); +#122820 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#122821 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122822 = DIRECTION('',(0.,0.,1.)); +#122823 = ADVANCED_FACE('',(#122824),#122835,.T.); +#122824 = FACE_BOUND('',#122825,.T.); +#122825 = EDGE_LOOP('',(#122826,#122832,#122833,#122834)); +#122826 = ORIENTED_EDGE('',*,*,#122827,.T.); +#122827 = EDGE_CURVE('',#121794,#121867,#122828,.T.); +#122828 = LINE('',#122829,#122830); +#122829 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#122830 = VECTOR('',#122831,1.); +#122831 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122832 = ORIENTED_EDGE('',*,*,#121874,.T.); +#122833 = ORIENTED_EDGE('',*,*,#122810,.F.); +#122834 = ORIENTED_EDGE('',*,*,#121801,.F.); +#122835 = PLANE('',#122836); +#122836 = AXIS2_PLACEMENT_3D('',#122837,#122838,#122839); +#122837 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#122838 = DIRECTION('',(0.,0.,1.)); +#122839 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122840 = ADVANCED_FACE('',(#122841),#122847,.T.); +#122841 = FACE_BOUND('',#122842,.T.); +#122842 = EDGE_LOOP('',(#122843,#122844,#122845,#122846)); +#122843 = ORIENTED_EDGE('',*,*,#121901,.T.); +#122844 = ORIENTED_EDGE('',*,*,#121866,.T.); +#122845 = ORIENTED_EDGE('',*,*,#122827,.F.); +#122846 = ORIENTED_EDGE('',*,*,#121793,.F.); +#122847 = PLANE('',#122848); +#122848 = AXIS2_PLACEMENT_3D('',#122849,#122850,#122851); +#122849 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#122850 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122851 = DIRECTION('',(0.,0.,-1.)); +#122852 = ADVANCED_FACE('',(#122853),#122864,.T.); +#122853 = FACE_BOUND('',#122854,.T.); +#122854 = EDGE_LOOP('',(#122855,#122861,#122862,#122863)); +#122855 = ORIENTED_EDGE('',*,*,#122856,.T.); +#122856 = EDGE_CURVE('',#121968,#122041,#122857,.T.); +#122857 = LINE('',#122858,#122859); +#122858 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#122859 = VECTOR('',#122860,1.); +#122860 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122861 = ORIENTED_EDGE('',*,*,#122048,.T.); +#122862 = ORIENTED_EDGE('',*,*,#121999,.F.); +#122863 = ORIENTED_EDGE('',*,*,#121975,.F.); +#122864 = PLANE('',#122865); +#122865 = AXIS2_PLACEMENT_3D('',#122866,#122867,#122868); +#122866 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#122867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122868 = DIRECTION('',(0.,0.,1.)); +#122869 = ADVANCED_FACE('',(#122870),#122881,.T.); +#122870 = FACE_BOUND('',#122871,.T.); +#122871 = EDGE_LOOP('',(#122872,#122878,#122879,#122880)); +#122872 = ORIENTED_EDGE('',*,*,#122873,.T.); +#122873 = EDGE_CURVE('',#121960,#122033,#122874,.T.); +#122874 = LINE('',#122875,#122876); +#122875 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#122876 = VECTOR('',#122877,1.); +#122877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122878 = ORIENTED_EDGE('',*,*,#122040,.T.); +#122879 = ORIENTED_EDGE('',*,*,#122856,.F.); +#122880 = ORIENTED_EDGE('',*,*,#121967,.F.); +#122881 = PLANE('',#122882); +#122882 = AXIS2_PLACEMENT_3D('',#122883,#122884,#122885); +#122883 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#122884 = DIRECTION('',(0.,0.,1.)); +#122885 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122886 = ADVANCED_FACE('',(#122887),#122893,.T.); +#122887 = FACE_BOUND('',#122888,.T.); +#122888 = EDGE_LOOP('',(#122889,#122890,#122891,#122892)); +#122889 = ORIENTED_EDGE('',*,*,#122067,.T.); +#122890 = ORIENTED_EDGE('',*,*,#122032,.T.); +#122891 = ORIENTED_EDGE('',*,*,#122873,.F.); +#122892 = ORIENTED_EDGE('',*,*,#121959,.F.); +#122893 = PLANE('',#122894); +#122894 = AXIS2_PLACEMENT_3D('',#122895,#122896,#122897); +#122895 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#122896 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122897 = DIRECTION('',(0.,0.,-1.)); +#122898 = ADVANCED_FACE('',(#122899),#122910,.T.); +#122899 = FACE_BOUND('',#122900,.T.); +#122900 = EDGE_LOOP('',(#122901,#122907,#122908,#122909)); +#122901 = ORIENTED_EDGE('',*,*,#122902,.T.); +#122902 = EDGE_CURVE('',#122134,#122207,#122903,.T.); +#122903 = LINE('',#122904,#122905); +#122904 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122905 = VECTOR('',#122906,1.); +#122906 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122907 = ORIENTED_EDGE('',*,*,#122214,.T.); +#122908 = ORIENTED_EDGE('',*,*,#122165,.F.); +#122909 = ORIENTED_EDGE('',*,*,#122141,.F.); +#122910 = PLANE('',#122911); +#122911 = AXIS2_PLACEMENT_3D('',#122912,#122913,#122914); +#122912 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122913 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122914 = DIRECTION('',(0.,0.,1.)); +#122915 = ADVANCED_FACE('',(#122916),#122927,.T.); +#122916 = FACE_BOUND('',#122917,.T.); +#122917 = EDGE_LOOP('',(#122918,#122924,#122925,#122926)); +#122918 = ORIENTED_EDGE('',*,*,#122919,.T.); +#122919 = EDGE_CURVE('',#122126,#122199,#122920,.T.); +#122920 = LINE('',#122921,#122922); +#122921 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122922 = VECTOR('',#122923,1.); +#122923 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122924 = ORIENTED_EDGE('',*,*,#122206,.T.); +#122925 = ORIENTED_EDGE('',*,*,#122902,.F.); +#122926 = ORIENTED_EDGE('',*,*,#122133,.F.); +#122927 = PLANE('',#122928); +#122928 = AXIS2_PLACEMENT_3D('',#122929,#122930,#122931); +#122929 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122930 = DIRECTION('',(0.,0.,1.)); +#122931 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122932 = ADVANCED_FACE('',(#122933),#122939,.T.); +#122933 = FACE_BOUND('',#122934,.T.); +#122934 = EDGE_LOOP('',(#122935,#122936,#122937,#122938)); +#122935 = ORIENTED_EDGE('',*,*,#122233,.T.); +#122936 = ORIENTED_EDGE('',*,*,#122198,.T.); +#122937 = ORIENTED_EDGE('',*,*,#122919,.F.); +#122938 = ORIENTED_EDGE('',*,*,#122125,.F.); +#122939 = PLANE('',#122940); +#122940 = AXIS2_PLACEMENT_3D('',#122941,#122942,#122943); +#122941 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122942 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122943 = DIRECTION('',(0.,0.,-1.)); +#122944 = ADVANCED_FACE('',(#122945),#122956,.T.); +#122945 = FACE_BOUND('',#122946,.T.); +#122946 = EDGE_LOOP('',(#122947,#122953,#122954,#122955)); +#122947 = ORIENTED_EDGE('',*,*,#122948,.T.); +#122948 = EDGE_CURVE('',#122300,#122373,#122949,.T.); +#122949 = LINE('',#122950,#122951); +#122950 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122951 = VECTOR('',#122952,1.); +#122952 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122953 = ORIENTED_EDGE('',*,*,#122380,.T.); +#122954 = ORIENTED_EDGE('',*,*,#122331,.F.); +#122955 = ORIENTED_EDGE('',*,*,#122307,.F.); +#122956 = PLANE('',#122957); +#122957 = AXIS2_PLACEMENT_3D('',#122958,#122959,#122960); +#122958 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122959 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122960 = DIRECTION('',(0.,0.,1.)); +#122961 = ADVANCED_FACE('',(#122962),#122973,.T.); +#122962 = FACE_BOUND('',#122963,.T.); +#122963 = EDGE_LOOP('',(#122964,#122970,#122971,#122972)); +#122964 = ORIENTED_EDGE('',*,*,#122965,.T.); +#122965 = EDGE_CURVE('',#122292,#122365,#122966,.T.); +#122966 = LINE('',#122967,#122968); +#122967 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122968 = VECTOR('',#122969,1.); +#122969 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122970 = ORIENTED_EDGE('',*,*,#122372,.T.); +#122971 = ORIENTED_EDGE('',*,*,#122948,.F.); +#122972 = ORIENTED_EDGE('',*,*,#122299,.F.); +#122973 = PLANE('',#122974); +#122974 = AXIS2_PLACEMENT_3D('',#122975,#122976,#122977); +#122975 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122976 = DIRECTION('',(0.,0.,1.)); +#122977 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122978 = ADVANCED_FACE('',(#122979),#122985,.T.); +#122979 = FACE_BOUND('',#122980,.T.); +#122980 = EDGE_LOOP('',(#122981,#122982,#122983,#122984)); +#122981 = ORIENTED_EDGE('',*,*,#122399,.T.); +#122982 = ORIENTED_EDGE('',*,*,#122364,.T.); +#122983 = ORIENTED_EDGE('',*,*,#122965,.F.); +#122984 = ORIENTED_EDGE('',*,*,#122291,.F.); +#122985 = PLANE('',#122986); +#122986 = AXIS2_PLACEMENT_3D('',#122987,#122988,#122989); +#122987 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122988 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122989 = DIRECTION('',(0.,0.,-1.)); +#122990 = ADVANCED_FACE('',(#122991),#123002,.T.); +#122991 = FACE_BOUND('',#122992,.T.); +#122992 = EDGE_LOOP('',(#122993,#122999,#123000,#123001)); +#122993 = ORIENTED_EDGE('',*,*,#122994,.T.); +#122994 = EDGE_CURVE('',#122466,#122539,#122995,.T.); +#122995 = LINE('',#122996,#122997); +#122996 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#122997 = VECTOR('',#122998,1.); +#122998 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122999 = ORIENTED_EDGE('',*,*,#122546,.T.); +#123000 = ORIENTED_EDGE('',*,*,#122497,.F.); +#123001 = ORIENTED_EDGE('',*,*,#122473,.F.); +#123002 = PLANE('',#123003); +#123003 = AXIS2_PLACEMENT_3D('',#123004,#123005,#123006); +#123004 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#123005 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#123006 = DIRECTION('',(0.,0.,1.)); +#123007 = ADVANCED_FACE('',(#123008),#123019,.T.); +#123008 = FACE_BOUND('',#123009,.T.); +#123009 = EDGE_LOOP('',(#123010,#123016,#123017,#123018)); +#123010 = ORIENTED_EDGE('',*,*,#123011,.T.); +#123011 = EDGE_CURVE('',#122458,#122531,#123012,.T.); +#123012 = LINE('',#123013,#123014); +#123013 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#123014 = VECTOR('',#123015,1.); +#123015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#123016 = ORIENTED_EDGE('',*,*,#122538,.T.); +#123017 = ORIENTED_EDGE('',*,*,#122994,.F.); +#123018 = ORIENTED_EDGE('',*,*,#122465,.F.); +#123019 = PLANE('',#123020); +#123020 = AXIS2_PLACEMENT_3D('',#123021,#123022,#123023); +#123021 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#123022 = DIRECTION('',(0.,0.,1.)); +#123023 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#123024 = ADVANCED_FACE('',(#123025),#123031,.T.); +#123025 = FACE_BOUND('',#123026,.T.); +#123026 = EDGE_LOOP('',(#123027,#123028,#123029,#123030)); +#123027 = ORIENTED_EDGE('',*,*,#122565,.T.); +#123028 = ORIENTED_EDGE('',*,*,#122530,.T.); +#123029 = ORIENTED_EDGE('',*,*,#123011,.F.); +#123030 = ORIENTED_EDGE('',*,*,#122457,.F.); +#123031 = PLANE('',#123032); +#123032 = AXIS2_PLACEMENT_3D('',#123033,#123034,#123035); +#123033 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#123034 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#123035 = DIRECTION('',(0.,0.,-1.)); +#123036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#123040)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#123037,#123038,#123039)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#123037 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#123038 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#123039 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#123040 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#123037, + 'distance_accuracy_value','confusion accuracy'); +#123041 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#123042,#123044); +#123042 = ( REPRESENTATION_RELATIONSHIP('','',#114993,#114970) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#123043) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#123043 = ITEM_DEFINED_TRANSFORMATION('','',#11,#114971); +#123044 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #123045); +#123045 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('156','=>[0:1:1:68]','',#114965 + ,#114988,$); +#123046 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#114990)); +#123047 = SHAPE_DEFINITION_REPRESENTATION(#123048,#123054); +#123048 = PRODUCT_DEFINITION_SHAPE('','',#123049); +#123049 = PRODUCT_DEFINITION('design','',#123050,#123053); +#123050 = PRODUCT_DEFINITION_FORMATION('','',#123051); +#123051 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_silkscreen', + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_silkscreen','',(#123052) + ); +#123052 = PRODUCT_CONTEXT('',#2,'mechanical'); +#123053 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#123054 = SHAPE_REPRESENTATION('',(#11,#123055,#123123,#123167,#123413, + #123515,#124074,#124374,#124635,#125679,#126000,#126102,#126389, + #126676,#126963,#127185,#127312,#127439,#127566,#127674,#127752, + #127926,#128107,#128185,#128383,#128557,#129043,#129472,#129626, + #129668,#130007,#130059,#130111,#130205,#130485,#130734,#130869, + #130996,#131252,#131524,#131667,#131719,#131771,#131965,#132059, + #132103,#132254,#132380,#132597,#132807,#132958,#133084,#133227, + #133312,#133454,#133581,#133853,#134037,#134122,#134316,#134360, + #134512,#134606,#134842,#134984,#135162,#135340,#135481,#135625, + #135769,#135821,#135873,#135925,#135977,#136121,#136265,#136342, + #136427,#136496,#136944,#137127,#137269,#137393,#137545,#137678, + #137796,#137924,#138118,#138260,#138388,#138531,#138828,#139011, + #139055,#139197,#139404,#139448,#139641,#139784,#139978,#140046, + #140124,#140168,#140262,#140306,#140350,#140394,#140438,#140506, + #140575,#140703,#140770,#140896,#140940,#140984,#141028,#141206, + #141274,#141441,#141612,#141805,#141998,#142067,#142270,#142422, + #142584,#142809,#142853,#142955,#142999,#143177,#143229,#143396, + #143589,#143741,#143903,#144128,#144172,#144216,#144260,#144304, + #144348,#144392,#144436,#144480,#144524,#144568,#144612,#144656, + #144700,#144810,#144854,#144898,#144942,#144986,#145053,#145097, + #145141,#145185,#145229,#145273,#145317,#145361,#145528,#145695, + #145837,#146008,#146179,#146350,#146521,#146692,#146863,#147034, + #147205,#147376,#147476,#147669,#147862,#147931,#148134,#148365, + #148543,#148764,#149077,#149280,#149446,#149596,#149739,#149882, + #150076,#150288,#150482,#150632,#150826,#150976,#151119,#151325, + #151400,#151444,#151622,#151699,#152147,#152314,#152485,#152651, + #152761,#152992,#153077,#153298,#153342,#153436,#153692,#153948, + #154228,#154272,#154396,#154585,#154943,#155238,#155588,#155883, + #156206,#156478,#156703,#156829,#156964,#157072,#157180,#157274, + #157530,#157590,#157869,#157929,#158208,#158285,#158499,#158699, + #158793,#158975,#159142,#159335,#159552,#159845,#159875,#159919, + #159963,#160007,#160051,#160153,#160254,#160355,#160399,#160443, + #160487,#160531,#160854,#161006,#161148,#161319,#161490,#161661, + #161832,#162026,#162229,#162432,#162660,#162881,#163102,#163154, + #163296,#163373,#163511,#163579,#163623,#163667,#163818,#163953, + #164047,#164091,#164135,#164328,#164658,#164801,#164911,#164955, + #164999,#165150,#165202,#165254,#165425,#165628,#165941,#166134, + #166328,#166471,#166515,#166559,#166603,#166647,#166691,#166735, + #166779,#166823,#166899,#167041,#167208,#167401,#167594,#167788, + #167982,#168176,#168220,#168264,#168308,#168352,#168396,#168440, + #168607,#168733,#168940,#169134,#169312,#169494,#169676,#169818, + #169985,#170156,#170327,#170498,#170669,#170840,#171011,#171304, + #171507,#171710,#171913,#172125,#172346,#172558,#172645,#172865, + #172909,#173003,#173047,#173091,#173262,#173331,#173575,#173742, + #173982,#174076,#174214,#174357,#174434,#174536,#174984,#175028, + #175221,#175265,#175528,#175721,#175915,#176127,#176171,#176248, + #176325,#176369,#176421,#176572,#176624,#176676,#176818,#177011, + #177205,#177292,#177360,#177404,#177624,#177718,#177930,#177974, + #178152,#178254,#178447,#178641,#178844,#179022,#179066,#179110, + #179154,#179382,#179712,#179879,#180050,#180253,#180396,#180624, + #180736,#180848,#180892,#180936,#181222,#181316,#181454,#181648, + #181799,#181991,#182117,#182375,#182718,#182910,#183036,#183294, + #183362,#183456,#183525,#183594,#183746,#183790,#183877,#184180, + #184382,#184602,#184874,#185002,#185223,#185267,#185474,#185755, + #185898,#186069,#186272,#186466,#186568,#186612,#186865,#187137, + #187257,#187424,#187518,#187656,#187774,#187818,#188141,#188171, + #188264,#188308,#188561,#188833,#188953,#189071,#189198,#189267, + #189461,#189563,#189705,#189876,#190148,#190397,#190564,#190641, + #190779,#191028,#191261,#191501,#191545,#191597,#191819,#191945, + #192203,#192456,#192525,#192797,#192917,#192969,#193013,#193107, + #193175,#193219,#193549,#193666,#193733,#193802,#194003,#194088, + #194132,#194176,#194279,#194494,#194665,#194765,#194990,#195221, + #195399,#195509,#195619,#195746,#195873,#196067,#196339,#196416, + #196493,#196537,#196985,#197178,#197414,#197621,#197824,#197980, + #198172,#198298,#198556,#198658,#198777,#199026,#199178,#199313, + #199497,#199591,#199726,#199836,#200030,#200149,#200201,#200343, + #200521,#200686,#200780,#200918,#201053,#201231,#201411,#201589, + #201773,#201817,#201869,#202081,#202330,#202440,#202634,#202914, + #202966,#203167,#203447,#203715,#203995,#204263,#204531,#204799, + #205067,#205177,#205312,#205662,#205872,#205982,#206059,#206186, + #206271,#206356,#206457,#206658,#206768,#206862,#206997,#207175, + #207252,#207436,#207521,#207598,#207675,#207752,#207829,#207914, + #207999,#208242,#208345,#208430,#208597,#208791,#208985,#209095, + #209230,#209373,#209467,#209560,#209663,#209831,#209941,#210112, + #210172,#210366,#210550,#210627,#210739,#210817,#210886,#211027, + #211229,#211431,#211574,#211618,#211696,#211765,#211834,#211903, + #212086,#212130,#212207,#212447,#212895,#212989,#213083,#213152, + #213465,#213693,#213864,#213924,#214057,#214235,#214353,#214505, + #214583,#214627,#214778,#214830,#214882,#215165,#215209,#215421, + #215563,#215756,#215968,#216118,#216185,#216455,#216567,#216751, + #217109,#217381,#217704,#217830,#217965,#218220,#218297,#218448, + #218662,#218764,#218907,#219065,#219223,#219308,#219508,#219568, + #219653,#219738,#219946,#219990,#220100,#220202,#220279,#220727, + #220771,#220978,#221199,#221293,#221623,#221765,#221936,#222079, + #222221,#222273,#222603,#222671,#222874,#222976,#223070,#223164, + #223266,#223310,#223412,#223464,#223794,#224015,#224067,#224135, + #224203,#224247,#224341,#224519,#224571,#224742,#224852,#225101, + #225195,#225263,#225307,#225351,#225395,#225439,#225533,#225627, + #225729,#225936,#226192,#226402,#226544,#226751,#226963,#227115, + #227159,#227203,#227247,#227291,#227376,#227560,#227702,#227869, + #228011,#228178,#228349,#228520,#228691,#228862,#229093,#229259, + #229490,#229656,#229892,#229969,#230114,#230292,#230370,#230537, + #230665,#230734,#230916,#230985,#231127,#231320,#231372,#231424, + #231534,#231602,#231702,#231794,#232025,#232135,#232279,#232414, + #232608,#232857,#232951,#233045,#233313,#233562,#233672,#233840, + #233884,#234094,#234272,#234357,#234499,#234625,#234874,#235036, + #235113,#235198,#235283,#235451,#235731,#235909,#235961,#236013, + #236065,#236150,#236351,#236403,#236506,#236591,#236758,#236852, + #236987,#237196,#237390,#237568,#237686,#237821,#237906,#238018, + #238112,#238392,#238672,#238850,#238935,#239136,#239320,#239397, + #239521,#239565,#239650,#239816,#239949,#240059,#240339,#240458, + #240502,#240694,#240804,#240872,#240941,#241119,#241163,#241207, + #241537,#241679,#241891,#242033,#242175,#242368,#242462,#242547, + #242740,#242934,#243085,#243211,#243378,#243522,#243970,#244451, + #244899,#245347,#245498,#245624,#245766,#245923,#246085,#246137, + #246189,#246233,#246277,#246321,#246365,#246574,#246618,#246662, + #246706,#246750,#246794,#246936,#247103,#247274,#247445,#247616, + #247787,#248032,#248277,#248522,#248716,#248961,#249104,#249342, + #249535,#249604,#249656,#249708,#249752,#249796,#249840,#250023, + #250099,#250193,#250287,#250381,#250475,#250658,#250727,#250796, + #250865,#250934,#250978,#251022,#251066,#251259,#251303,#251429, + #251623,#251805,#251972,#252139,#252281,#252452,#252623,#252816, + #253010,#253303,#253515,#253657,#253759,#253961,#254103,#254270, + #254412,#254554,#254692,#254895,#255033,#255227,#255365,#255503, + #255645,#255812,#256019,#256226,#256433,#256640,#256885,#257130, + #257375,#257569,#257814),#257957); +#123055 = SHELL_BASED_SURFACE_MODEL('',(#123056)); +#123056 = OPEN_SHELL('',(#123057)); +#123057 = ADVANCED_FACE('',(#123058),#123118,.T.); +#123058 = FACE_BOUND('',#123059,.F.); +#123059 = EDGE_LOOP('',(#123060,#123071,#123079,#123087,#123095,#123103, + #123112)); +#123060 = ORIENTED_EDGE('',*,*,#123061,.T.); +#123061 = EDGE_CURVE('',#123062,#123064,#123066,.T.); +#123062 = VERTEX_POINT('',#123063); +#123063 = CARTESIAN_POINT('',(172.25165,-139.2131,1.585)); +#123064 = VERTEX_POINT('',#123065); +#123065 = CARTESIAN_POINT('',(172.202988,-139.118,1.585)); +#123066 = CIRCLE('',#123067,6.000053001949E-02); +#123067 = AXIS2_PLACEMENT_3D('',#123068,#123069,#123070); +#123068 = CARTESIAN_POINT('',(172.25165103329,-139.1530994699,1.585)); +#123069 = DIRECTION('',(0.,0.,-1.)); +#123070 = DIRECTION('',(-1.722136500322E-05,-0.999999999852,-0.)); +#123071 = ORIENTED_EDGE('',*,*,#123072,.T.); +#123072 = EDGE_CURVE('',#123064,#123073,#123075,.T.); +#123073 = VERTEX_POINT('',#123074); +#123074 = CARTESIAN_POINT('',(172.642988,-138.508,1.585)); +#123075 = LINE('',#123076,#123077); +#123076 = CARTESIAN_POINT('',(172.202988,-139.118,1.585)); +#123077 = VECTOR('',#123078,1.); +#123078 = DIRECTION('',(0.5850050123,0.811029676143,0.)); +#123079 = ORIENTED_EDGE('',*,*,#123080,.T.); +#123080 = EDGE_CURVE('',#123073,#123081,#123083,.T.); +#123081 = VERTEX_POINT('',#123082); +#123082 = CARTESIAN_POINT('',(172.682061,-138.483871,1.585)); +#123083 = LINE('',#123084,#123085); +#123084 = CARTESIAN_POINT('',(172.642988,-138.508,1.585)); +#123085 = VECTOR('',#123086,1.); +#123086 = DIRECTION('',(0.850840086953,0.52542472956,0.)); +#123087 = ORIENTED_EDGE('',*,*,#123088,.T.); +#123088 = EDGE_CURVE('',#123081,#123089,#123091,.T.); +#123089 = VERTEX_POINT('',#123090); +#123090 = CARTESIAN_POINT('',(172.72675,-138.494438,1.585)); +#123091 = LINE('',#123092,#123093); +#123092 = CARTESIAN_POINT('',(172.682061,-138.483871,1.585)); +#123093 = VECTOR('',#123094,1.); +#123094 = DIRECTION('',(0.973164400763,-0.230110949515,0.)); +#123095 = ORIENTED_EDGE('',*,*,#123096,.T.); +#123096 = EDGE_CURVE('',#123089,#123097,#123099,.T.); +#123097 = VERTEX_POINT('',#123098); +#123098 = CARTESIAN_POINT('',(173.180312,-139.118,1.585)); +#123099 = LINE('',#123100,#123101); +#123100 = CARTESIAN_POINT('',(172.72675,-138.494438,1.585)); +#123101 = VECTOR('',#123102,1.); +#123102 = DIRECTION('',(0.58822459592,-0.808697610207,0.)); +#123103 = ORIENTED_EDGE('',*,*,#123104,.T.); +#123104 = EDGE_CURVE('',#123097,#123105,#123107,.T.); +#123105 = VERTEX_POINT('',#123106); +#123106 = CARTESIAN_POINT('',(173.13165,-139.2131,1.585)); +#123107 = CIRCLE('',#123108,5.999982350119E-02); +#123108 = AXIS2_PLACEMENT_3D('',#123109,#123110,#123111); +#123109 = CARTESIAN_POINT('',(173.13165034744,-139.1531001765,1.585)); +#123110 = DIRECTION('',(0.,0.,-1.)); +#123111 = DIRECTION('',(0.811029928428,0.585004662541,0.)); +#123112 = ORIENTED_EDGE('',*,*,#123113,.T.); +#123113 = EDGE_CURVE('',#123105,#123062,#123114,.T.); +#123114 = LINE('',#123115,#123116); +#123115 = CARTESIAN_POINT('',(173.13165,-139.2131,1.585)); +#123116 = VECTOR('',#123117,1.); +#123117 = DIRECTION('',(-1.,0.,0.)); +#123118 = PLANE('',#123119); +#123119 = AXIS2_PLACEMENT_3D('',#123120,#123121,#123122); +#123120 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123121 = DIRECTION('',(0.,0.,1.)); +#123122 = DIRECTION('',(1.,0.,-0.)); +#123123 = SHELL_BASED_SURFACE_MODEL('',(#123124)); +#123124 = OPEN_SHELL('',(#123125)); +#123125 = ADVANCED_FACE('',(#123126),#123162,.T.); +#123126 = FACE_BOUND('',#123127,.F.); +#123127 = EDGE_LOOP('',(#123128,#123139,#123147,#123156)); +#123128 = ORIENTED_EDGE('',*,*,#123129,.T.); +#123129 = EDGE_CURVE('',#123130,#123132,#123134,.T.); +#123130 = VERTEX_POINT('',#123131); +#123131 = CARTESIAN_POINT('',(200.19165,-138.8831,1.585)); +#123132 = VERTEX_POINT('',#123133); +#123133 = CARTESIAN_POINT('',(200.19165,-138.7631,1.585)); +#123134 = CIRCLE('',#123135,6.000000000042E-02); +#123135 = AXIS2_PLACEMENT_3D('',#123136,#123137,#123138); +#123136 = CARTESIAN_POINT('',(200.19164977441,-138.8231,1.585)); +#123137 = DIRECTION('',(0.,0.,-1.)); +#123138 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#123139 = ORIENTED_EDGE('',*,*,#123140,.T.); +#123140 = EDGE_CURVE('',#123132,#123141,#123143,.T.); +#123141 = VERTEX_POINT('',#123142); +#123142 = CARTESIAN_POINT('',(204.69165,-138.7631,1.585)); +#123143 = LINE('',#123144,#123145); +#123144 = CARTESIAN_POINT('',(200.19165,-138.7631,1.585)); +#123145 = VECTOR('',#123146,1.); +#123146 = DIRECTION('',(1.,0.,0.)); +#123147 = ORIENTED_EDGE('',*,*,#123148,.T.); +#123148 = EDGE_CURVE('',#123141,#123149,#123151,.T.); +#123149 = VERTEX_POINT('',#123150); +#123150 = CARTESIAN_POINT('',(204.69165,-138.8831,1.585)); +#123151 = CIRCLE('',#123152,6.000000000042E-02); +#123152 = AXIS2_PLACEMENT_3D('',#123153,#123154,#123155); +#123153 = CARTESIAN_POINT('',(204.69165022558,-138.8231,1.585)); +#123154 = DIRECTION('',(0.,0.,-1.)); +#123155 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#123156 = ORIENTED_EDGE('',*,*,#123157,.T.); +#123157 = EDGE_CURVE('',#123149,#123130,#123158,.T.); +#123158 = LINE('',#123159,#123160); +#123159 = CARTESIAN_POINT('',(204.69165,-138.8831,1.585)); +#123160 = VECTOR('',#123161,1.); +#123161 = DIRECTION('',(-1.,0.,0.)); +#123162 = PLANE('',#123163); +#123163 = AXIS2_PLACEMENT_3D('',#123164,#123165,#123166); +#123164 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123165 = DIRECTION('',(0.,0.,1.)); +#123166 = DIRECTION('',(1.,0.,-0.)); +#123167 = SHELL_BASED_SURFACE_MODEL('',(#123168)); +#123168 = OPEN_SHELL('',(#123169)); +#123169 = ADVANCED_FACE('',(#123170,#123306,#123340,#123374),#123408,.T. + ); +#123170 = FACE_BOUND('',#123171,.F.); +#123171 = EDGE_LOOP('',(#123172,#123183,#123191,#123200,#123208,#123217, + #123225,#123234,#123242,#123250,#123258,#123266,#123274,#123283, + #123291,#123300)); +#123172 = ORIENTED_EDGE('',*,*,#123173,.T.); +#123173 = EDGE_CURVE('',#123174,#123176,#123178,.T.); +#123174 = VERTEX_POINT('',#123175); +#123175 = CARTESIAN_POINT('',(170.01165,-128.5031,1.585)); +#123176 = VERTEX_POINT('',#123177); +#123177 = CARTESIAN_POINT('',(170.07165,-128.4431,1.585)); +#123178 = CIRCLE('',#123179,5.999932016268E-02); +#123179 = AXIS2_PLACEMENT_3D('',#123180,#123181,#123182); +#123180 = CARTESIAN_POINT('',(170.07164932015,-128.5030993201,1.585)); +#123181 = DIRECTION('',(0.,0.,-1.)); +#123182 = DIRECTION('',(-0.999999999936,-1.133081470031E-05,-0.)); +#123183 = ORIENTED_EDGE('',*,*,#123184,.T.); +#123184 = EDGE_CURVE('',#123176,#123185,#123187,.T.); +#123185 = VERTEX_POINT('',#123186); +#123186 = CARTESIAN_POINT('',(195.31165,-128.4431,1.585)); +#123187 = LINE('',#123188,#123189); +#123188 = CARTESIAN_POINT('',(170.07165,-128.4431,1.585)); +#123189 = VECTOR('',#123190,1.); +#123190 = DIRECTION('',(1.,0.,0.)); +#123191 = ORIENTED_EDGE('',*,*,#123192,.T.); +#123192 = EDGE_CURVE('',#123185,#123193,#123195,.T.); +#123193 = VERTEX_POINT('',#123194); +#123194 = CARTESIAN_POINT('',(195.37165,-128.5031,1.585)); +#123195 = CIRCLE('',#123196,5.999932016262E-02); +#123196 = AXIS2_PLACEMENT_3D('',#123197,#123198,#123199); +#123197 = CARTESIAN_POINT('',(195.31165067984,-128.5030993201,1.585)); +#123198 = DIRECTION('',(0.,0.,-1.)); +#123199 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#123200 = ORIENTED_EDGE('',*,*,#123201,.T.); +#123201 = EDGE_CURVE('',#123193,#123202,#123204,.T.); +#123202 = VERTEX_POINT('',#123203); +#123203 = CARTESIAN_POINT('',(195.37165,-138.5431,1.585)); +#123204 = LINE('',#123205,#123206); +#123205 = CARTESIAN_POINT('',(195.37165,-128.5031,1.585)); +#123206 = VECTOR('',#123207,1.); +#123207 = DIRECTION('',(0.,-1.,0.)); +#123208 = ORIENTED_EDGE('',*,*,#123209,.T.); +#123209 = EDGE_CURVE('',#123202,#123210,#123212,.T.); +#123210 = VERTEX_POINT('',#123211); +#123211 = CARTESIAN_POINT('',(195.31165,-138.6031,1.585)); +#123212 = CIRCLE('',#123213,5.999932016261E-02); +#123213 = AXIS2_PLACEMENT_3D('',#123214,#123215,#123216); +#123214 = CARTESIAN_POINT('',(195.31165067984,-138.5431006798,1.585)); +#123215 = DIRECTION('',(0.,0.,-1.)); +#123216 = DIRECTION('',(0.999999999936,1.133081612142E-05,0.)); +#123217 = ORIENTED_EDGE('',*,*,#123218,.T.); +#123218 = EDGE_CURVE('',#123210,#123219,#123221,.T.); +#123219 = VERTEX_POINT('',#123220); +#123220 = CARTESIAN_POINT('',(172.99165,-138.6031,1.585)); +#123221 = LINE('',#123222,#123223); +#123222 = CARTESIAN_POINT('',(195.31165,-138.6031,1.585)); +#123223 = VECTOR('',#123224,1.); +#123224 = DIRECTION('',(-1.,0.,0.)); +#123225 = ORIENTED_EDGE('',*,*,#123226,.T.); +#123226 = EDGE_CURVE('',#123219,#123227,#123229,.T.); +#123227 = VERTEX_POINT('',#123228); +#123228 = CARTESIAN_POINT('',(172.99165,-138.4831,1.585)); +#123229 = CIRCLE('',#123230,6.000000000042E-02); +#123230 = AXIS2_PLACEMENT_3D('',#123231,#123232,#123233); +#123231 = CARTESIAN_POINT('',(172.99164977441,-138.5431,1.585)); +#123232 = DIRECTION('',(0.,0.,-1.)); +#123233 = DIRECTION('',(3.75979377999E-06,-0.999999999993,0.)); +#123234 = ORIENTED_EDGE('',*,*,#123235,.T.); +#123235 = EDGE_CURVE('',#123227,#123236,#123238,.T.); +#123236 = VERTEX_POINT('',#123237); +#123237 = CARTESIAN_POINT('',(195.25165,-138.4831,1.585)); +#123238 = LINE('',#123239,#123240); +#123239 = CARTESIAN_POINT('',(172.99165,-138.4831,1.585)); +#123240 = VECTOR('',#123241,1.); +#123241 = DIRECTION('',(1.,0.,0.)); +#123242 = ORIENTED_EDGE('',*,*,#123243,.T.); +#123243 = EDGE_CURVE('',#123236,#123244,#123246,.T.); +#123244 = VERTEX_POINT('',#123245); +#123245 = CARTESIAN_POINT('',(195.25165,-137.9831,1.585)); +#123246 = LINE('',#123247,#123248); +#123247 = CARTESIAN_POINT('',(195.25165,-138.4831,1.585)); +#123248 = VECTOR('',#123249,1.); +#123249 = DIRECTION('',(0.,1.,0.)); +#123250 = ORIENTED_EDGE('',*,*,#123251,.T.); +#123251 = EDGE_CURVE('',#123244,#123252,#123254,.T.); +#123252 = VERTEX_POINT('',#123253); +#123253 = CARTESIAN_POINT('',(170.13165,-137.9831,1.585)); +#123254 = LINE('',#123255,#123256); +#123255 = CARTESIAN_POINT('',(195.25165,-137.9831,1.585)); +#123256 = VECTOR('',#123257,1.); +#123257 = DIRECTION('',(-1.,0.,0.)); +#123258 = ORIENTED_EDGE('',*,*,#123259,.T.); +#123259 = EDGE_CURVE('',#123252,#123260,#123262,.T.); +#123260 = VERTEX_POINT('',#123261); +#123261 = CARTESIAN_POINT('',(170.13165,-138.4831,1.585)); +#123262 = LINE('',#123263,#123264); +#123263 = CARTESIAN_POINT('',(170.13165,-137.9831,1.585)); +#123264 = VECTOR('',#123265,1.); +#123265 = DIRECTION('',(0.,-1.,0.)); +#123266 = ORIENTED_EDGE('',*,*,#123267,.T.); +#123267 = EDGE_CURVE('',#123260,#123268,#123270,.T.); +#123268 = VERTEX_POINT('',#123269); +#123269 = CARTESIAN_POINT('',(172.39165,-138.4831,1.585)); +#123270 = LINE('',#123271,#123272); +#123271 = CARTESIAN_POINT('',(170.13165,-138.4831,1.585)); +#123272 = VECTOR('',#123273,1.); +#123273 = DIRECTION('',(1.,0.,0.)); +#123274 = ORIENTED_EDGE('',*,*,#123275,.T.); +#123275 = EDGE_CURVE('',#123268,#123276,#123278,.T.); +#123276 = VERTEX_POINT('',#123277); +#123277 = CARTESIAN_POINT('',(172.39165,-138.6031,1.585)); +#123278 = CIRCLE('',#123279,6.000000000042E-02); +#123279 = AXIS2_PLACEMENT_3D('',#123280,#123281,#123282); +#123280 = CARTESIAN_POINT('',(172.39165022558,-138.5431,1.585)); +#123281 = DIRECTION('',(0.,0.,-1.)); +#123282 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#123283 = ORIENTED_EDGE('',*,*,#123284,.T.); +#123284 = EDGE_CURVE('',#123276,#123285,#123287,.T.); +#123285 = VERTEX_POINT('',#123286); +#123286 = CARTESIAN_POINT('',(170.07165,-138.6031,1.585)); +#123287 = LINE('',#123288,#123289); +#123288 = CARTESIAN_POINT('',(172.39165,-138.6031,1.585)); +#123289 = VECTOR('',#123290,1.); +#123290 = DIRECTION('',(-1.,0.,0.)); +#123291 = ORIENTED_EDGE('',*,*,#123292,.T.); +#123292 = EDGE_CURVE('',#123285,#123293,#123295,.T.); +#123293 = VERTEX_POINT('',#123294); +#123294 = CARTESIAN_POINT('',(170.01165,-138.5431,1.585)); +#123295 = CIRCLE('',#123296,5.999932016262E-02); +#123296 = AXIS2_PLACEMENT_3D('',#123297,#123298,#123299); +#123297 = CARTESIAN_POINT('',(170.07164932015,-138.5431006798,1.585)); +#123298 = DIRECTION('',(0.,0.,-1.)); +#123299 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#123300 = ORIENTED_EDGE('',*,*,#123301,.T.); +#123301 = EDGE_CURVE('',#123293,#123174,#123302,.T.); +#123302 = LINE('',#123303,#123304); +#123303 = CARTESIAN_POINT('',(170.01165,-138.5431,1.585)); +#123304 = VECTOR('',#123305,1.); +#123305 = DIRECTION('',(0.,1.,0.)); +#123306 = FACE_BOUND('',#123307,.F.); +#123307 = EDGE_LOOP('',(#123308,#123318,#123326,#123334)); +#123308 = ORIENTED_EDGE('',*,*,#123309,.T.); +#123309 = EDGE_CURVE('',#123310,#123312,#123314,.T.); +#123310 = VERTEX_POINT('',#123311); +#123311 = CARTESIAN_POINT('',(195.25165,-137.8631,1.585)); +#123312 = VERTEX_POINT('',#123313); +#123313 = CARTESIAN_POINT('',(195.25165,-136.4831,1.585)); +#123314 = LINE('',#123315,#123316); +#123315 = CARTESIAN_POINT('',(195.25165,-137.8631,1.585)); +#123316 = VECTOR('',#123317,1.); +#123317 = DIRECTION('',(0.,1.,0.)); +#123318 = ORIENTED_EDGE('',*,*,#123319,.T.); +#123319 = EDGE_CURVE('',#123312,#123320,#123322,.T.); +#123320 = VERTEX_POINT('',#123321); +#123321 = CARTESIAN_POINT('',(170.13165,-136.4831,1.585)); +#123322 = LINE('',#123323,#123324); +#123323 = CARTESIAN_POINT('',(195.25165,-136.4831,1.585)); +#123324 = VECTOR('',#123325,1.); +#123325 = DIRECTION('',(-1.,0.,0.)); +#123326 = ORIENTED_EDGE('',*,*,#123327,.T.); +#123327 = EDGE_CURVE('',#123320,#123328,#123330,.T.); +#123328 = VERTEX_POINT('',#123329); +#123329 = CARTESIAN_POINT('',(170.13165,-137.8631,1.585)); +#123330 = LINE('',#123331,#123332); +#123331 = CARTESIAN_POINT('',(170.13165,-136.4831,1.585)); +#123332 = VECTOR('',#123333,1.); +#123333 = DIRECTION('',(0.,-1.,0.)); +#123334 = ORIENTED_EDGE('',*,*,#123335,.T.); +#123335 = EDGE_CURVE('',#123328,#123310,#123336,.T.); +#123336 = LINE('',#123337,#123338); +#123337 = CARTESIAN_POINT('',(170.13165,-137.8631,1.585)); +#123338 = VECTOR('',#123339,1.); +#123339 = DIRECTION('',(1.,0.,0.)); +#123340 = FACE_BOUND('',#123341,.F.); +#123341 = EDGE_LOOP('',(#123342,#123352,#123360,#123368)); +#123342 = ORIENTED_EDGE('',*,*,#123343,.T.); +#123343 = EDGE_CURVE('',#123344,#123346,#123348,.T.); +#123344 = VERTEX_POINT('',#123345); +#123345 = CARTESIAN_POINT('',(195.25165,-136.3631,1.585)); +#123346 = VERTEX_POINT('',#123347); +#123347 = CARTESIAN_POINT('',(195.25165,-131.5831,1.585)); +#123348 = LINE('',#123349,#123350); +#123349 = CARTESIAN_POINT('',(195.25165,-136.3631,1.585)); +#123350 = VECTOR('',#123351,1.); +#123351 = DIRECTION('',(0.,1.,0.)); +#123352 = ORIENTED_EDGE('',*,*,#123353,.T.); +#123353 = EDGE_CURVE('',#123346,#123354,#123356,.T.); +#123354 = VERTEX_POINT('',#123355); +#123355 = CARTESIAN_POINT('',(170.13165,-131.5831,1.585)); +#123356 = LINE('',#123357,#123358); +#123357 = CARTESIAN_POINT('',(195.25165,-131.5831,1.585)); +#123358 = VECTOR('',#123359,1.); +#123359 = DIRECTION('',(-1.,0.,0.)); +#123360 = ORIENTED_EDGE('',*,*,#123361,.T.); +#123361 = EDGE_CURVE('',#123354,#123362,#123364,.T.); +#123362 = VERTEX_POINT('',#123363); +#123363 = CARTESIAN_POINT('',(170.13165,-136.3631,1.585)); +#123364 = LINE('',#123365,#123366); +#123365 = CARTESIAN_POINT('',(170.13165,-131.5831,1.585)); +#123366 = VECTOR('',#123367,1.); +#123367 = DIRECTION('',(0.,-1.,0.)); +#123368 = ORIENTED_EDGE('',*,*,#123369,.T.); +#123369 = EDGE_CURVE('',#123362,#123344,#123370,.T.); +#123370 = LINE('',#123371,#123372); +#123371 = CARTESIAN_POINT('',(170.13165,-136.3631,1.585)); +#123372 = VECTOR('',#123373,1.); +#123373 = DIRECTION('',(1.,0.,0.)); +#123374 = FACE_BOUND('',#123375,.F.); +#123375 = EDGE_LOOP('',(#123376,#123386,#123394,#123402)); +#123376 = ORIENTED_EDGE('',*,*,#123377,.T.); +#123377 = EDGE_CURVE('',#123378,#123380,#123382,.T.); +#123378 = VERTEX_POINT('',#123379); +#123379 = CARTESIAN_POINT('',(195.25165,-131.4631,1.585)); +#123380 = VERTEX_POINT('',#123381); +#123381 = CARTESIAN_POINT('',(195.25165,-128.5631,1.585)); +#123382 = LINE('',#123383,#123384); +#123383 = CARTESIAN_POINT('',(195.25165,-131.4631,1.585)); +#123384 = VECTOR('',#123385,1.); +#123385 = DIRECTION('',(0.,1.,0.)); +#123386 = ORIENTED_EDGE('',*,*,#123387,.T.); +#123387 = EDGE_CURVE('',#123380,#123388,#123390,.T.); +#123388 = VERTEX_POINT('',#123389); +#123389 = CARTESIAN_POINT('',(170.13165,-128.5631,1.585)); +#123390 = LINE('',#123391,#123392); +#123391 = CARTESIAN_POINT('',(195.25165,-128.5631,1.585)); +#123392 = VECTOR('',#123393,1.); +#123393 = DIRECTION('',(-1.,0.,0.)); +#123394 = ORIENTED_EDGE('',*,*,#123395,.T.); +#123395 = EDGE_CURVE('',#123388,#123396,#123398,.T.); +#123396 = VERTEX_POINT('',#123397); +#123397 = CARTESIAN_POINT('',(170.13165,-131.4631,1.585)); +#123398 = LINE('',#123399,#123400); +#123399 = CARTESIAN_POINT('',(170.13165,-128.5631,1.585)); +#123400 = VECTOR('',#123401,1.); +#123401 = DIRECTION('',(0.,-1.,0.)); +#123402 = ORIENTED_EDGE('',*,*,#123403,.T.); +#123403 = EDGE_CURVE('',#123396,#123378,#123404,.T.); +#123404 = LINE('',#123405,#123406); +#123405 = CARTESIAN_POINT('',(170.13165,-131.4631,1.585)); +#123406 = VECTOR('',#123407,1.); +#123407 = DIRECTION('',(1.,0.,0.)); +#123408 = PLANE('',#123409); +#123409 = AXIS2_PLACEMENT_3D('',#123410,#123411,#123412); +#123410 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123411 = DIRECTION('',(0.,0.,1.)); +#123412 = DIRECTION('',(1.,0.,-0.)); +#123413 = SHELL_BASED_SURFACE_MODEL('',(#123414)); +#123414 = OPEN_SHELL('',(#123415)); +#123415 = ADVANCED_FACE('',(#123416),#123510,.T.); +#123416 = FACE_BOUND('',#123417,.F.); +#123417 = EDGE_LOOP('',(#123418,#123429,#123437,#123445,#123453,#123462, + #123470,#123479,#123487,#123496,#123504)); +#123418 = ORIENTED_EDGE('',*,*,#123419,.T.); +#123419 = EDGE_CURVE('',#123420,#123422,#123424,.T.); +#123420 = VERTEX_POINT('',#123421); +#123421 = CARTESIAN_POINT('',(159.499567,-135.402039,1.585)); +#123422 = VERTEX_POINT('',#123423); +#123423 = CARTESIAN_POINT('',(159.615,-135.425,1.585)); +#123424 = CIRCLE('',#123425,6.000007318646E-02); +#123425 = AXIS2_PLACEMENT_3D('',#123426,#123427,#123428); +#123426 = CARTESIAN_POINT('',(159.55499992681,-135.4249998233,1.585)); +#123427 = DIRECTION('',(0.,0.,-1.)); +#123428 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#123429 = ORIENTED_EDGE('',*,*,#123430,.T.); +#123430 = EDGE_CURVE('',#123422,#123431,#123433,.T.); +#123431 = VERTEX_POINT('',#123432); +#123432 = CARTESIAN_POINT('',(159.615,-138.095,1.585)); +#123433 = LINE('',#123434,#123435); +#123434 = CARTESIAN_POINT('',(159.615,-135.425,1.585)); +#123435 = VECTOR('',#123436,1.); +#123436 = DIRECTION('',(0.,-1.,0.)); +#123437 = ORIENTED_EDGE('',*,*,#123438,.T.); +#123438 = EDGE_CURVE('',#123431,#123439,#123441,.T.); +#123439 = VERTEX_POINT('',#123440); +#123440 = CARTESIAN_POINT('',(168.685,-138.095,1.585)); +#123441 = LINE('',#123442,#123443); +#123442 = CARTESIAN_POINT('',(159.615,-138.095,1.585)); +#123443 = VECTOR('',#123444,1.); +#123444 = DIRECTION('',(1.,0.,0.)); +#123445 = ORIENTED_EDGE('',*,*,#123446,.T.); +#123446 = EDGE_CURVE('',#123439,#123447,#123449,.T.); +#123447 = VERTEX_POINT('',#123448); +#123448 = CARTESIAN_POINT('',(168.685,-135.425,1.585)); +#123449 = LINE('',#123450,#123451); +#123450 = CARTESIAN_POINT('',(168.685,-138.095,1.585)); +#123451 = VECTOR('',#123452,1.); +#123452 = DIRECTION('',(0.,1.,0.)); +#123453 = ORIENTED_EDGE('',*,*,#123454,.T.); +#123454 = EDGE_CURVE('',#123447,#123455,#123457,.T.); +#123455 = VERTEX_POINT('',#123456); +#123456 = CARTESIAN_POINT('',(168.805,-135.425,1.585)); +#123457 = CIRCLE('',#123458,6.000000000043E-02); +#123458 = AXIS2_PLACEMENT_3D('',#123459,#123460,#123461); +#123459 = CARTESIAN_POINT('',(168.745,-135.4249997744,1.585)); +#123460 = DIRECTION('',(0.,0.,-1.)); +#123461 = DIRECTION('',(-0.999999999993,-3.759794253684E-06,-0.)); +#123462 = ORIENTED_EDGE('',*,*,#123463,.T.); +#123463 = EDGE_CURVE('',#123455,#123464,#123466,.T.); +#123464 = VERTEX_POINT('',#123465); +#123465 = CARTESIAN_POINT('',(168.805,-138.155,1.585)); +#123466 = LINE('',#123467,#123468); +#123467 = CARTESIAN_POINT('',(168.805,-135.425,1.585)); +#123468 = VECTOR('',#123469,1.); +#123469 = DIRECTION('',(0.,-1.,0.)); +#123470 = ORIENTED_EDGE('',*,*,#123471,.T.); +#123471 = EDGE_CURVE('',#123464,#123472,#123474,.T.); +#123472 = VERTEX_POINT('',#123473); +#123473 = CARTESIAN_POINT('',(168.745,-138.215,1.585)); +#123474 = CIRCLE('',#123475,5.999932016262E-02); +#123475 = AXIS2_PLACEMENT_3D('',#123476,#123477,#123478); +#123476 = CARTESIAN_POINT('',(168.74500067984,-138.1550006798,1.585)); +#123477 = DIRECTION('',(0.,0.,-1.)); +#123478 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#123479 = ORIENTED_EDGE('',*,*,#123480,.T.); +#123480 = EDGE_CURVE('',#123472,#123481,#123483,.T.); +#123481 = VERTEX_POINT('',#123482); +#123482 = CARTESIAN_POINT('',(159.555,-138.215,1.585)); +#123483 = LINE('',#123484,#123485); +#123484 = CARTESIAN_POINT('',(168.745,-138.215,1.585)); +#123485 = VECTOR('',#123486,1.); +#123486 = DIRECTION('',(-1.,0.,0.)); +#123487 = ORIENTED_EDGE('',*,*,#123488,.T.); +#123488 = EDGE_CURVE('',#123481,#123489,#123491,.T.); +#123489 = VERTEX_POINT('',#123490); +#123490 = CARTESIAN_POINT('',(159.495,-138.155,1.585)); +#123491 = CIRCLE('',#123492,5.999932016262E-02); +#123492 = AXIS2_PLACEMENT_3D('',#123493,#123494,#123495); +#123493 = CARTESIAN_POINT('',(159.55499932015,-138.1550006798,1.585)); +#123494 = DIRECTION('',(0.,0.,-1.)); +#123495 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#123496 = ORIENTED_EDGE('',*,*,#123497,.T.); +#123497 = EDGE_CURVE('',#123489,#123498,#123500,.T.); +#123498 = VERTEX_POINT('',#123499); +#123499 = CARTESIAN_POINT('',(159.495,-135.425,1.585)); +#123500 = LINE('',#123501,#123502); +#123501 = CARTESIAN_POINT('',(159.495,-138.155,1.585)); +#123502 = VECTOR('',#123503,1.); +#123503 = DIRECTION('',(0.,1.,0.)); +#123504 = ORIENTED_EDGE('',*,*,#123505,.T.); +#123505 = EDGE_CURVE('',#123498,#123420,#123506,.T.); +#123506 = LINE('',#123507,#123508); +#123507 = CARTESIAN_POINT('',(159.495,-135.425,1.585)); +#123508 = VECTOR('',#123509,1.); +#123509 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#123510 = PLANE('',#123511); +#123511 = AXIS2_PLACEMENT_3D('',#123512,#123513,#123514); +#123512 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123513 = DIRECTION('',(0.,0.,1.)); +#123514 = DIRECTION('',(1.,0.,-0.)); +#123515 = SHELL_BASED_SURFACE_MODEL('',(#123516)); +#123516 = OPEN_SHELL('',(#123517)); +#123517 = ADVANCED_FACE('',(#123518,#123954),#124069,.T.); +#123518 = FACE_BOUND('',#123519,.F.); +#123519 = EDGE_LOOP('',(#123520,#123531,#123539,#123547,#123555,#123563, + #123571,#123579,#123587,#123595,#123603,#123611,#123619,#123627, + #123635,#123643,#123651,#123659,#123667,#123675,#123683,#123691, + #123699,#123707,#123715,#123724,#123732,#123740,#123748,#123756, + #123764,#123772,#123780,#123788,#123796,#123804,#123812,#123820, + #123828,#123836,#123844,#123852,#123860,#123868,#123876,#123884, + #123892,#123900,#123908,#123916,#123924,#123932,#123940,#123948)); +#123520 = ORIENTED_EDGE('',*,*,#123521,.T.); +#123521 = EDGE_CURVE('',#123522,#123524,#123526,.T.); +#123522 = VERTEX_POINT('',#123523); +#123523 = CARTESIAN_POINT('',(103.930742,-135.240275,1.585)); +#123524 = VERTEX_POINT('',#123525); +#123525 = CARTESIAN_POINT('',(104.472379,-134.679957,1.585)); +#123526 = CIRCLE('',#123527,1.258975264585); +#123527 = AXIS2_PLACEMENT_3D('',#123528,#123529,#123530); +#123528 = CARTESIAN_POINT('',(105.06230596647,-135.7921642158,1.585)); +#123529 = DIRECTION('',(0.,0.,-1.)); +#123530 = DIRECTION('',(-0.898797616052,0.438363827635,0.)); +#123531 = ORIENTED_EDGE('',*,*,#123532,.T.); +#123532 = EDGE_CURVE('',#123524,#123533,#123535,.T.); +#123533 = VERTEX_POINT('',#123534); +#123534 = CARTESIAN_POINT('',(104.696506,-134.605251,1.585)); +#123535 = LINE('',#123536,#123537); +#123536 = CARTESIAN_POINT('',(104.472379,-134.679957,1.585)); +#123537 = VECTOR('',#123538,1.); +#123538 = DIRECTION('',(0.948687107511,0.316216337406,0.)); +#123539 = ORIENTED_EDGE('',*,*,#123540,.T.); +#123540 = EDGE_CURVE('',#123533,#123541,#123543,.T.); +#123541 = VERTEX_POINT('',#123542); +#123542 = CARTESIAN_POINT('',(105.1074,-134.58657,1.585)); +#123543 = LINE('',#123544,#123545); +#123544 = CARTESIAN_POINT('',(104.696506,-134.605251,1.585)); +#123545 = VECTOR('',#123546,1.); +#123546 = DIRECTION('',(0.998968099037,4.541736569073E-02,0.)); +#123547 = ORIENTED_EDGE('',*,*,#123548,.T.); +#123548 = EDGE_CURVE('',#123541,#123549,#123551,.T.); +#123549 = VERTEX_POINT('',#123550); +#123550 = CARTESIAN_POINT('',(105.126078,-134.605251,1.585)); +#123551 = LINE('',#123552,#123553); +#123552 = CARTESIAN_POINT('',(105.1074,-134.58657,1.585)); +#123553 = VECTOR('',#123554,1.); +#123554 = DIRECTION('',(0.707049996864,-0.70716356095,0.)); +#123555 = ORIENTED_EDGE('',*,*,#123556,.T.); +#123556 = EDGE_CURVE('',#123549,#123557,#123559,.T.); +#123557 = VERTEX_POINT('',#123558); +#123558 = CARTESIAN_POINT('',(105.238146,-134.605251,1.585)); +#123559 = LINE('',#123560,#123561); +#123560 = CARTESIAN_POINT('',(105.126078,-134.605251,1.585)); +#123561 = VECTOR('',#123562,1.); +#123562 = DIRECTION('',(1.,0.,0.)); +#123563 = ORIENTED_EDGE('',*,*,#123564,.T.); +#123564 = EDGE_CURVE('',#123557,#123565,#123567,.T.); +#123565 = VERTEX_POINT('',#123566); +#123566 = CARTESIAN_POINT('',(105.462266,-134.679957,1.585)); +#123567 = LINE('',#123568,#123569); +#123568 = CARTESIAN_POINT('',(105.238146,-134.605251,1.585)); +#123569 = VECTOR('',#123570,1.); +#123570 = DIRECTION('',(0.948684144633,-0.316225226258,0.)); +#123571 = ORIENTED_EDGE('',*,*,#123572,.T.); +#123572 = EDGE_CURVE('',#123565,#123573,#123575,.T.); +#123573 = VERTEX_POINT('',#123574); +#123574 = CARTESIAN_POINT('',(105.705072,-134.848052,1.585)); +#123575 = LINE('',#123576,#123577); +#123576 = CARTESIAN_POINT('',(105.462266,-134.679957,1.585)); +#123577 = VECTOR('',#123578,1.); +#123578 = DIRECTION('',(0.822194507811,-0.56920663324,0.)); +#123579 = ORIENTED_EDGE('',*,*,#123580,.T.); +#123580 = EDGE_CURVE('',#123573,#123581,#123583,.T.); +#123581 = VERTEX_POINT('',#123582); +#123582 = CARTESIAN_POINT('',(105.723753,-134.829375,1.585)); +#123583 = LINE('',#123584,#123585); +#123584 = CARTESIAN_POINT('',(105.705072,-134.848052,1.585)); +#123585 = VECTOR('',#123586,1.); +#123586 = DIRECTION('',(0.70718248855,0.707031065716,0.)); +#123587 = ORIENTED_EDGE('',*,*,#123588,.T.); +#123588 = EDGE_CURVE('',#123581,#123589,#123591,.T.); +#123589 = VERTEX_POINT('',#123590); +#123590 = CARTESIAN_POINT('',(105.742426,-134.642604,1.585)); +#123591 = LINE('',#123592,#123593); +#123592 = CARTESIAN_POINT('',(105.723753,-134.829375,1.585)); +#123593 = VECTOR('',#123594,1.); +#123594 = DIRECTION('',(9.948209214608E-02,0.99503935266,0.)); +#123595 = ORIENTED_EDGE('',*,*,#123596,.T.); +#123596 = EDGE_CURVE('',#123589,#123597,#123599,.T.); +#123597 = VERTEX_POINT('',#123598); +#123598 = CARTESIAN_POINT('',(106.489516,-134.642604,1.585)); +#123599 = LINE('',#123600,#123601); +#123600 = CARTESIAN_POINT('',(105.742426,-134.642604,1.585)); +#123601 = VECTOR('',#123602,1.); +#123602 = DIRECTION('',(1.,0.,0.)); +#123603 = ORIENTED_EDGE('',*,*,#123604,.T.); +#123604 = EDGE_CURVE('',#123597,#123605,#123607,.T.); +#123605 = VERTEX_POINT('',#123606); +#123606 = CARTESIAN_POINT('',(106.526866,-134.679957,1.585)); +#123607 = LINE('',#123608,#123609); +#123608 = CARTESIAN_POINT('',(106.489516,-134.642604,1.585)); +#123609 = VECTOR('',#123610,1.); +#123610 = DIRECTION('',(0.707078383894,-0.707135177339,0.)); +#123611 = ORIENTED_EDGE('',*,*,#123612,.T.); +#123612 = EDGE_CURVE('',#123605,#123613,#123615,.T.); +#123613 = VERTEX_POINT('',#123614); +#123614 = CARTESIAN_POINT('',(106.526866,-137.201372,1.585)); +#123615 = LINE('',#123616,#123617); +#123616 = CARTESIAN_POINT('',(106.526866,-134.679957,1.585)); +#123617 = VECTOR('',#123618,1.); +#123618 = DIRECTION('',(0.,-1.,0.)); +#123619 = ORIENTED_EDGE('',*,*,#123620,.T.); +#123620 = EDGE_CURVE('',#123613,#123621,#123623,.T.); +#123621 = VERTEX_POINT('',#123622); +#123622 = CARTESIAN_POINT('',(106.452164,-137.518882,1.585)); +#123623 = LINE('',#123624,#123625); +#123624 = CARTESIAN_POINT('',(106.526866,-137.201372,1.585)); +#123625 = VECTOR('',#123626,1.); +#123626 = DIRECTION('',(-0.22902122035,-0.973421430126,0.)); +#123627 = ORIENTED_EDGE('',*,*,#123628,.T.); +#123628 = EDGE_CURVE('',#123621,#123629,#123631,.T.); +#123629 = VERTEX_POINT('',#123630); +#123630 = CARTESIAN_POINT('',(106.321416,-137.743011,1.585)); +#123631 = LINE('',#123632,#123633); +#123632 = CARTESIAN_POINT('',(106.452164,-137.518882,1.585)); +#123633 = VECTOR('',#123634,1.); +#123634 = DIRECTION('',(-0.503888517692,-0.863768696896,0.)); +#123635 = ORIENTED_EDGE('',*,*,#123636,.T.); +#123636 = EDGE_CURVE('',#123629,#123637,#123639,.T.); +#123637 = VERTEX_POINT('',#123638); +#123638 = CARTESIAN_POINT('',(106.13465,-137.929779,1.585)); +#123639 = LINE('',#123640,#123641); +#123640 = CARTESIAN_POINT('',(106.321416,-137.743011,1.585)); +#123641 = VECTOR('',#123642,1.); +#123642 = DIRECTION('',(-0.707102995139,-0.707110567213,0.)); +#123643 = ORIENTED_EDGE('',*,*,#123644,.T.); +#123644 = EDGE_CURVE('',#123637,#123645,#123647,.T.); +#123645 = VERTEX_POINT('',#123646); +#123646 = CARTESIAN_POINT('',(105.854494,-138.097875,1.585)); +#123647 = LINE('',#123648,#123649); +#123648 = CARTESIAN_POINT('',(106.13465,-137.929779,1.585)); +#123649 = VECTOR('',#123650,1.); +#123650 = DIRECTION('',(-0.857489684893,-0.514501156755,0.)); +#123651 = ORIENTED_EDGE('',*,*,#123652,.T.); +#123652 = EDGE_CURVE('',#123645,#123653,#123655,.T.); +#123653 = VERTEX_POINT('',#123654); +#123654 = CARTESIAN_POINT('',(105.518299,-138.191255,1.585)); +#123655 = LINE('',#123656,#123657); +#123656 = CARTESIAN_POINT('',(105.854494,-138.097875,1.585)); +#123657 = VECTOR('',#123658,1.); +#123658 = DIRECTION('',(-0.963523452481,-0.267623908722,0.)); +#123659 = ORIENTED_EDGE('',*,*,#123660,.T.); +#123660 = EDGE_CURVE('',#123653,#123661,#123663,.T.); +#123661 = VERTEX_POINT('',#123662); +#123662 = CARTESIAN_POINT('',(105.387565,-138.191255,1.585)); +#123663 = LINE('',#123664,#123665); +#123664 = CARTESIAN_POINT('',(105.518299,-138.191255,1.585)); +#123665 = VECTOR('',#123666,1.); +#123666 = DIRECTION('',(-1.,0.,0.)); +#123667 = ORIENTED_EDGE('',*,*,#123668,.T.); +#123668 = EDGE_CURVE('',#123661,#123669,#123671,.T.); +#123669 = VERTEX_POINT('',#123670); +#123670 = CARTESIAN_POINT('',(105.36888,-138.20994,1.585)); +#123671 = LINE('',#123672,#123673); +#123672 = CARTESIAN_POINT('',(105.387565,-138.191255,1.585)); +#123673 = VECTOR('',#123674,1.); +#123674 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#123675 = ORIENTED_EDGE('',*,*,#123676,.T.); +#123676 = EDGE_CURVE('',#123669,#123677,#123679,.T.); +#123677 = VERTEX_POINT('',#123678); +#123678 = CARTESIAN_POINT('',(104.920629,-138.20994,1.585)); +#123679 = LINE('',#123680,#123681); +#123680 = CARTESIAN_POINT('',(105.36888,-138.20994,1.585)); +#123681 = VECTOR('',#123682,1.); +#123682 = DIRECTION('',(-1.,0.,0.)); +#123683 = ORIENTED_EDGE('',*,*,#123684,.T.); +#123684 = EDGE_CURVE('',#123677,#123685,#123687,.T.); +#123685 = VERTEX_POINT('',#123686); +#123686 = CARTESIAN_POINT('',(104.901955,-138.191255,1.585)); +#123687 = LINE('',#123688,#123689); +#123688 = CARTESIAN_POINT('',(104.920629,-138.20994,1.585)); +#123689 = VECTOR('',#123690,1.); +#123690 = DIRECTION('',(-0.70689854972,0.70731495135,0.)); +#123691 = ORIENTED_EDGE('',*,*,#123692,.T.); +#123692 = EDGE_CURVE('',#123685,#123693,#123695,.T.); +#123693 = VERTEX_POINT('',#123694); +#123694 = CARTESIAN_POINT('',(104.67783,-138.172583,1.585)); +#123695 = LINE('',#123696,#123697); +#123696 = CARTESIAN_POINT('',(104.901955,-138.191255,1.585)); +#123697 = VECTOR('',#123698,1.); +#123698 = DIRECTION('',(-0.996547628543,8.302303321882E-02,0.)); +#123699 = ORIENTED_EDGE('',*,*,#123700,.T.); +#123700 = EDGE_CURVE('',#123693,#123701,#123703,.T.); +#123701 = VERTEX_POINT('',#123702); +#123702 = CARTESIAN_POINT('',(104.472379,-138.097875,1.585)); +#123703 = LINE('',#123704,#123705); +#123704 = CARTESIAN_POINT('',(104.67783,-138.172583,1.585)); +#123705 = VECTOR('',#123706,1.); +#123706 = DIRECTION('',(-0.939795560372,0.341737186601,0.)); +#123707 = ORIENTED_EDGE('',*,*,#123708,.T.); +#123708 = EDGE_CURVE('',#123701,#123709,#123711,.T.); +#123709 = VERTEX_POINT('',#123710); +#123710 = CARTESIAN_POINT('',(104.416352,-138.097875,1.585)); +#123711 = LINE('',#123712,#123713); +#123712 = CARTESIAN_POINT('',(104.472379,-138.097875,1.585)); +#123713 = VECTOR('',#123714,1.); +#123714 = DIRECTION('',(-1.,0.,0.)); +#123715 = ORIENTED_EDGE('',*,*,#123716,.T.); +#123716 = EDGE_CURVE('',#123709,#123717,#123719,.T.); +#123717 = VERTEX_POINT('',#123718); +#123718 = CARTESIAN_POINT('',(103.930742,-137.668304,1.585)); +#123719 = CIRCLE('',#123720,1.018544588725); +#123720 = AXIS2_PLACEMENT_3D('',#123721,#123722,#123723); +#123721 = CARTESIAN_POINT('',(104.81330961002,-137.1598676785,1.585)); +#123722 = DIRECTION('',(0.,0.,-1.)); +#123723 = DIRECTION('',(-0.389730223321,-0.920929070575,-0.)); +#123724 = ORIENTED_EDGE('',*,*,#123725,.T.); +#123725 = EDGE_CURVE('',#123717,#123726,#123728,.T.); +#123726 = VERTEX_POINT('',#123727); +#123727 = CARTESIAN_POINT('',(103.893393,-137.556238,1.585)); +#123728 = LINE('',#123729,#123730); +#123729 = CARTESIAN_POINT('',(103.930742,-137.668304,1.585)); +#123730 = VECTOR('',#123731,1.); +#123731 = DIRECTION('',(-0.316179512021,0.948699381352,0.)); +#123732 = ORIENTED_EDGE('',*,*,#123733,.T.); +#123733 = EDGE_CURVE('',#123726,#123734,#123736,.T.); +#123734 = VERTEX_POINT('',#123735); +#123735 = CARTESIAN_POINT('',(103.930742,-137.518882,1.585)); +#123736 = LINE('',#123737,#123738); +#123737 = CARTESIAN_POINT('',(103.893393,-137.556238,1.585)); +#123738 = VECTOR('',#123739,1.); +#123739 = DIRECTION('',(0.707040520838,0.707173035327,0.)); +#123740 = ORIENTED_EDGE('',*,*,#123741,.T.); +#123741 = EDGE_CURVE('',#123734,#123742,#123744,.T.); +#123742 = VERTEX_POINT('',#123743); +#123743 = CARTESIAN_POINT('',(104.0428,-137.481529,1.585)); +#123744 = LINE('',#123745,#123746); +#123745 = CARTESIAN_POINT('',(103.930742,-137.518882,1.585)); +#123746 = VECTOR('',#123747,1.); +#123747 = DIRECTION('',(0.948682451448,0.316230305814,0.)); +#123748 = ORIENTED_EDGE('',*,*,#123749,.T.); +#123749 = EDGE_CURVE('',#123742,#123750,#123752,.T.); +#123750 = VERTEX_POINT('',#123751); +#123751 = CARTESIAN_POINT('',(104.472379,-137.257401,1.585)); +#123752 = LINE('',#123753,#123754); +#123753 = CARTESIAN_POINT('',(104.0428,-137.481529,1.585)); +#123754 = VECTOR('',#123755,1.); +#123755 = DIRECTION('',(0.886584993364,0.462565724564,0.)); +#123756 = ORIENTED_EDGE('',*,*,#123757,.T.); +#123757 = EDGE_CURVE('',#123750,#123758,#123760,.T.); +#123758 = VERTEX_POINT('',#123759); +#123759 = CARTESIAN_POINT('',(104.528412,-137.257401,1.585)); +#123760 = LINE('',#123761,#123762); +#123761 = CARTESIAN_POINT('',(104.472379,-137.257401,1.585)); +#123762 = VECTOR('',#123763,1.); +#123763 = DIRECTION('',(1.,0.,0.)); +#123764 = ORIENTED_EDGE('',*,*,#123765,.T.); +#123765 = EDGE_CURVE('',#123758,#123766,#123768,.T.); +#123766 = VERTEX_POINT('',#123767); +#123767 = CARTESIAN_POINT('',(104.696506,-137.425499,1.585)); +#123768 = LINE('',#123769,#123770); +#123769 = CARTESIAN_POINT('',(104.528412,-137.257401,1.585)); +#123770 = VECTOR('',#123771,1.); +#123771 = DIRECTION('',(0.707098368006,-0.707115194267,0.)); +#123772 = ORIENTED_EDGE('',*,*,#123773,.T.); +#123773 = EDGE_CURVE('',#123766,#123774,#123776,.T.); +#123774 = VERTEX_POINT('',#123775); +#123775 = CARTESIAN_POINT('',(104.920629,-137.518882,1.585)); +#123776 = LINE('',#123777,#123778); +#123777 = CARTESIAN_POINT('',(104.696506,-137.425499,1.585)); +#123778 = VECTOR('',#123779,1.); +#123779 = DIRECTION('',(0.923079238265,-0.384609828116,0.)); +#123780 = ORIENTED_EDGE('',*,*,#123781,.T.); +#123781 = EDGE_CURVE('',#123774,#123782,#123784,.T.); +#123782 = VERTEX_POINT('',#123783); +#123783 = CARTESIAN_POINT('',(105.238146,-137.537562,1.585)); +#123784 = LINE('',#123785,#123786); +#123785 = CARTESIAN_POINT('',(104.920629,-137.518882,1.585)); +#123786 = VECTOR('',#123787,1.); +#123787 = DIRECTION('',(0.998273906964,-5.87299470016E-02,0.)); +#123788 = ORIENTED_EDGE('',*,*,#123789,.T.); +#123789 = EDGE_CURVE('',#123782,#123790,#123792,.T.); +#123790 = VERTEX_POINT('',#123791); +#123791 = CARTESIAN_POINT('',(105.387565,-137.500204,1.585)); +#123792 = LINE('',#123793,#123794); +#123793 = CARTESIAN_POINT('',(105.238146,-137.537562,1.585)); +#123794 = VECTOR('',#123795,1.); +#123795 = DIRECTION('',(0.970137534912,0.242555485107,0.)); +#123796 = ORIENTED_EDGE('',*,*,#123797,.T.); +#123797 = EDGE_CURVE('',#123790,#123798,#123800,.T.); +#123798 = VERTEX_POINT('',#123799); +#123799 = CARTESIAN_POINT('',(105.57433,-137.388146,1.585)); +#123800 = LINE('',#123801,#123802); +#123801 = CARTESIAN_POINT('',(105.387565,-137.500204,1.585)); +#123802 = VECTOR('',#123803,1.); +#123803 = DIRECTION('',(0.857494951281,0.514492379464,0.)); +#123804 = ORIENTED_EDGE('',*,*,#123805,.T.); +#123805 = EDGE_CURVE('',#123798,#123806,#123808,.T.); +#123806 = VERTEX_POINT('',#123807); +#123807 = CARTESIAN_POINT('',(105.667717,-137.27608,1.585)); +#123808 = LINE('',#123809,#123810); +#123809 = CARTESIAN_POINT('',(105.57433,-137.388146,1.585)); +#123810 = VECTOR('',#123811,1.); +#123811 = DIRECTION('',(0.640179005457,0.768225774739,0.)); +#123812 = ORIENTED_EDGE('',*,*,#123813,.T.); +#123813 = EDGE_CURVE('',#123806,#123814,#123816,.T.); +#123814 = VERTEX_POINT('',#123815); +#123815 = CARTESIAN_POINT('',(105.723753,-137.145344,1.585)); +#123816 = LINE('',#123817,#123818); +#123817 = CARTESIAN_POINT('',(105.667717,-137.27608,1.585)); +#123818 = VECTOR('',#123819,1.); +#123819 = DIRECTION('',(0.39395663221,0.919129028993,0.)); +#123820 = ORIENTED_EDGE('',*,*,#123821,.T.); +#123821 = EDGE_CURVE('',#123814,#123822,#123824,.T.); +#123822 = VERTEX_POINT('',#123823); +#123823 = CARTESIAN_POINT('',(105.723753,-136.846511,1.585)); +#123824 = LINE('',#123825,#123826); +#123825 = CARTESIAN_POINT('',(105.723753,-137.145344,1.585)); +#123826 = VECTOR('',#123827,1.); +#123827 = DIRECTION('',(0.,1.,0.)); +#123828 = ORIENTED_EDGE('',*,*,#123829,.T.); +#123829 = EDGE_CURVE('',#123822,#123830,#123832,.T.); +#123830 = VERTEX_POINT('',#123831); +#123831 = CARTESIAN_POINT('',(105.705072,-136.827839,1.585)); +#123832 = LINE('',#123833,#123834); +#123833 = CARTESIAN_POINT('',(105.723753,-136.846511,1.585)); +#123834 = VECTOR('',#123835,1.); +#123835 = DIRECTION('',(-0.707277134148,0.706936387174,0.)); +#123836 = ORIENTED_EDGE('',*,*,#123837,.T.); +#123837 = EDGE_CURVE('',#123830,#123838,#123840,.T.); +#123838 = VERTEX_POINT('',#123839); +#123839 = CARTESIAN_POINT('',(105.649047,-136.846511,1.585)); +#123840 = LINE('',#123841,#123842); +#123841 = CARTESIAN_POINT('',(105.705072,-136.827839,1.585)); +#123842 = VECTOR('',#123843,1.); +#123843 = DIRECTION('',(-0.948698537086,-0.316182045238,0.)); +#123844 = ORIENTED_EDGE('',*,*,#123845,.T.); +#123845 = EDGE_CURVE('',#123838,#123846,#123848,.T.); +#123846 = VERTEX_POINT('',#123847); +#123847 = CARTESIAN_POINT('',(105.555652,-136.921217,1.585)); +#123848 = LINE('',#123849,#123850); +#123849 = CARTESIAN_POINT('',(105.649047,-136.846511,1.585)); +#123850 = VECTOR('',#123851,1.); +#123851 = DIRECTION('',(-0.78090959492,-0.624644062296,0.)); +#123852 = ORIENTED_EDGE('',*,*,#123853,.T.); +#123853 = EDGE_CURVE('',#123846,#123854,#123856,.T.); +#123854 = VERTEX_POINT('',#123855); +#123855 = CARTESIAN_POINT('',(105.238146,-137.014602,1.585)); +#123856 = LINE('',#123857,#123858); +#123857 = CARTESIAN_POINT('',(105.555652,-136.921217,1.585)); +#123858 = VECTOR('',#123859,1.); +#123859 = DIRECTION('',(-0.959364779857,-0.282168777809,0.)); +#123860 = ORIENTED_EDGE('',*,*,#123861,.T.); +#123861 = EDGE_CURVE('',#123854,#123862,#123864,.T.); +#123862 = VERTEX_POINT('',#123863); +#123863 = CARTESIAN_POINT('',(104.771213,-137.014602,1.585)); +#123864 = LINE('',#123865,#123866); +#123865 = CARTESIAN_POINT('',(105.238146,-137.014602,1.585)); +#123866 = VECTOR('',#123867,1.); +#123867 = DIRECTION('',(-1.,0.,0.)); +#123868 = ORIENTED_EDGE('',*,*,#123869,.T.); +#123869 = EDGE_CURVE('',#123862,#123870,#123872,.T.); +#123870 = VERTEX_POINT('',#123871); +#123871 = CARTESIAN_POINT('',(104.528412,-136.958569,1.585)); +#123872 = LINE('',#123873,#123874); +#123873 = CARTESIAN_POINT('',(104.771213,-137.014602,1.585)); +#123874 = VECTOR('',#123875,1.); +#123875 = DIRECTION('',(-0.974389437107,0.22486712711,0.)); +#123876 = ORIENTED_EDGE('',*,*,#123877,.T.); +#123877 = EDGE_CURVE('',#123870,#123878,#123880,.T.); +#123878 = VERTEX_POINT('',#123879); +#123879 = CARTESIAN_POINT('',(104.266929,-136.809154,1.585)); +#123880 = LINE('',#123881,#123882); +#123881 = CARTESIAN_POINT('',(104.528412,-136.958569,1.585)); +#123882 = VECTOR('',#123883,1.); +#123883 = DIRECTION('',(-0.868248659173,0.496129283397,0.)); +#123884 = ORIENTED_EDGE('',*,*,#123885,.T.); +#123885 = EDGE_CURVE('',#123878,#123886,#123888,.T.); +#123886 = VERTEX_POINT('',#123887); +#123887 = CARTESIAN_POINT('',(104.061482,-136.603707,1.585)); +#123888 = LINE('',#123889,#123890); +#123889 = CARTESIAN_POINT('',(104.266929,-136.809154,1.585)); +#123890 = VECTOR('',#123891,1.); +#123891 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#123892 = ORIENTED_EDGE('',*,*,#123893,.T.); +#123893 = EDGE_CURVE('',#123886,#123894,#123896,.T.); +#123894 = VERTEX_POINT('',#123895); +#123895 = CARTESIAN_POINT('',(103.893393,-136.304868,1.585)); +#123896 = LINE('',#123897,#123898); +#123897 = CARTESIAN_POINT('',(104.061482,-136.603707,1.585)); +#123898 = VECTOR('',#123899,1.); +#123899 = DIRECTION('',(-0.490243653556,0.871585429059,0.)); +#123900 = ORIENTED_EDGE('',*,*,#123901,.T.); +#123901 = EDGE_CURVE('',#123894,#123902,#123904,.T.); +#123902 = VERTEX_POINT('',#123903); +#123903 = CARTESIAN_POINT('',(103.837355,-136.099416,1.585)); +#123904 = LINE('',#123905,#123906); +#123905 = CARTESIAN_POINT('',(103.893393,-136.304868,1.585)); +#123906 = VECTOR('',#123907,1.); +#123907 = DIRECTION('',(-0.263142040483,0.964757102348,0.)); +#123908 = ORIENTED_EDGE('',*,*,#123909,.T.); +#123909 = EDGE_CURVE('',#123902,#123910,#123912,.T.); +#123910 = VERTEX_POINT('',#123911); +#123911 = CARTESIAN_POINT('',(103.837355,-135.968676,1.585)); +#123912 = LINE('',#123913,#123914); +#123913 = CARTESIAN_POINT('',(103.837355,-136.099416,1.585)); +#123914 = VECTOR('',#123915,1.); +#123915 = DIRECTION('',(0.,1.,0.)); +#123916 = ORIENTED_EDGE('',*,*,#123917,.T.); +#123917 = EDGE_CURVE('',#123910,#123918,#123920,.T.); +#123918 = VERTEX_POINT('',#123919); +#123919 = CARTESIAN_POINT('',(103.8,-135.95,1.585)); +#123920 = LINE('',#123921,#123922); +#123921 = CARTESIAN_POINT('',(103.837355,-135.968676,1.585)); +#123922 = VECTOR('',#123923,1.); +#123923 = DIRECTION('',(-0.894441557154,0.447184862037,0.)); +#123924 = ORIENTED_EDGE('',*,*,#123925,.T.); +#123925 = EDGE_CURVE('',#123918,#123926,#123928,.T.); +#123926 = VERTEX_POINT('',#123927); +#123927 = CARTESIAN_POINT('',(103.8,-135.688523,1.585)); +#123928 = LINE('',#123929,#123930); +#123929 = CARTESIAN_POINT('',(103.8,-135.95,1.585)); +#123930 = VECTOR('',#123931,1.); +#123931 = DIRECTION('',(0.,1.,0.)); +#123932 = ORIENTED_EDGE('',*,*,#123933,.T.); +#123933 = EDGE_CURVE('',#123926,#123934,#123936,.T.); +#123934 = VERTEX_POINT('',#123935); +#123935 = CARTESIAN_POINT('',(103.837355,-135.651172,1.585)); +#123936 = LINE('',#123937,#123938); +#123937 = CARTESIAN_POINT('',(103.8,-135.688523,1.585)); +#123938 = VECTOR('',#123939,1.); +#123939 = DIRECTION('',(0.707144640949,0.707068919397,0.)); +#123940 = ORIENTED_EDGE('',*,*,#123941,.T.); +#123941 = EDGE_CURVE('',#123934,#123942,#123944,.T.); +#123942 = VERTEX_POINT('',#123943); +#123943 = CARTESIAN_POINT('',(103.856041,-135.445712,1.585)); +#123944 = LINE('',#123945,#123946); +#123945 = CARTESIAN_POINT('',(103.837355,-135.651172,1.585)); +#123946 = VECTOR('',#123947,1.); +#123947 = DIRECTION('',(9.057333104268E-02,0.995889788934,0.)); +#123948 = ORIENTED_EDGE('',*,*,#123949,.T.); +#123949 = EDGE_CURVE('',#123942,#123522,#123950,.T.); +#123950 = LINE('',#123951,#123952); +#123951 = CARTESIAN_POINT('',(103.856041,-135.445712,1.585)); +#123952 = VECTOR('',#123953,1.); +#123953 = DIRECTION('',(0.341729472725,0.939798365327,0.)); +#123954 = FACE_BOUND('',#123955,.F.); +#123955 = EDGE_LOOP('',(#123956,#123966,#123974,#123982,#123990,#123998, + #124006,#124015,#124023,#124031,#124039,#124047,#124055,#124063)); +#123956 = ORIENTED_EDGE('',*,*,#123957,.T.); +#123957 = EDGE_CURVE('',#123958,#123960,#123962,.T.); +#123958 = VERTEX_POINT('',#123959); +#123959 = CARTESIAN_POINT('',(105.518299,-135.333658,1.585)); +#123960 = VERTEX_POINT('',#123961); +#123961 = CARTESIAN_POINT('',(105.350204,-135.258954,1.585)); +#123962 = LINE('',#123963,#123964); +#123963 = CARTESIAN_POINT('',(105.518299,-135.333658,1.585)); +#123964 = VECTOR('',#123965,1.); +#123965 = DIRECTION('',(-0.913821412224,0.40611627222,0.)); +#123966 = ORIENTED_EDGE('',*,*,#123967,.T.); +#123967 = EDGE_CURVE('',#123960,#123968,#123970,.T.); +#123968 = VERTEX_POINT('',#123969); +#123969 = CARTESIAN_POINT('',(105.070047,-135.258954,1.585)); +#123970 = LINE('',#123971,#123972); +#123971 = CARTESIAN_POINT('',(105.350204,-135.258954,1.585)); +#123972 = VECTOR('',#123973,1.); +#123973 = DIRECTION('',(-1.,0.,0.)); +#123974 = ORIENTED_EDGE('',*,*,#123975,.T.); +#123975 = EDGE_CURVE('',#123968,#123976,#123978,.T.); +#123976 = VERTEX_POINT('',#123977); +#123977 = CARTESIAN_POINT('',(104.883279,-135.333658,1.585)); +#123978 = LINE('',#123979,#123980); +#123979 = CARTESIAN_POINT('',(105.070047,-135.258954,1.585)); +#123980 = VECTOR('',#123981,1.); +#123981 = DIRECTION('',(-0.928482176371,-0.371376962347,0.)); +#123982 = ORIENTED_EDGE('',*,*,#123983,.T.); +#123983 = EDGE_CURVE('',#123976,#123984,#123986,.T.); +#123984 = VERTEX_POINT('',#123985); +#123985 = CARTESIAN_POINT('',(104.696506,-135.539108,1.585)); +#123986 = LINE('',#123987,#123988); +#123987 = CARTESIAN_POINT('',(104.883279,-135.333658,1.585)); +#123988 = VECTOR('',#123989,1.); +#123989 = DIRECTION('',(-0.672673331785,-0.739939584497,0.)); +#123990 = ORIENTED_EDGE('',*,*,#123991,.T.); +#123991 = EDGE_CURVE('',#123984,#123992,#123994,.T.); +#123992 = VERTEX_POINT('',#123993); +#123993 = CARTESIAN_POINT('',(104.640477,-135.78191,1.585)); +#123994 = LINE('',#123995,#123996); +#123995 = CARTESIAN_POINT('',(104.696506,-135.539108,1.585)); +#123996 = VECTOR('',#123997,1.); +#123997 = DIRECTION('',(-0.224851006996,-0.974393157126,0.)); +#123998 = ORIENTED_EDGE('',*,*,#123999,.T.); +#123999 = EDGE_CURVE('',#123992,#124000,#124002,.T.); +#124000 = VERTEX_POINT('',#124001); +#124001 = CARTESIAN_POINT('',(104.67783,-136.024711,1.585)); +#124002 = LINE('',#124003,#124004); +#124003 = CARTESIAN_POINT('',(104.640477,-135.78191,1.585)); +#124004 = VECTOR('',#124005,1.); +#124005 = DIRECTION('',(0.152053207664,-0.988372309426,0.)); +#124006 = ORIENTED_EDGE('',*,*,#124007,.T.); +#124007 = EDGE_CURVE('',#124000,#124008,#124010,.T.); +#124008 = VERTEX_POINT('',#124009); +#124009 = CARTESIAN_POINT('',(105.1074,-136.360902,1.585)); +#124010 = CIRCLE('',#124011,0.508067595501); +#124011 = AXIS2_PLACEMENT_3D('',#124012,#124013,#124014); +#124012 = CARTESIAN_POINT('',(105.15680063026,-135.8552417787,1.585)); +#124013 = DIRECTION('',(0.,0.,1.)); +#124014 = DIRECTION('',(-0.942730129821,-0.333556445489,0.)); +#124015 = ORIENTED_EDGE('',*,*,#124016,.T.); +#124016 = EDGE_CURVE('',#124008,#124017,#124019,.T.); +#124017 = VERTEX_POINT('',#124018); +#124018 = CARTESIAN_POINT('',(105.387565,-136.342221,1.585)); +#124019 = LINE('',#124020,#124021); +#124020 = CARTESIAN_POINT('',(105.1074,-136.360902,1.585)); +#124021 = VECTOR('',#124022,1.); +#124022 = DIRECTION('',(0.997784369863,6.65308293806E-02,0.)); +#124023 = ORIENTED_EDGE('',*,*,#124024,.T.); +#124024 = EDGE_CURVE('',#124017,#124025,#124027,.T.); +#124025 = VERTEX_POINT('',#124026); +#124026 = CARTESIAN_POINT('',(105.555652,-136.248834,1.585)); +#124027 = LINE('',#124028,#124029); +#124028 = CARTESIAN_POINT('',(105.387565,-136.342221,1.585)); +#124029 = VECTOR('',#124030,1.); +#124030 = DIRECTION('',(0.874145501026,0.485664125746,0.)); +#124031 = ORIENTED_EDGE('',*,*,#124032,.T.); +#124032 = EDGE_CURVE('',#124025,#124033,#124035,.T.); +#124033 = VERTEX_POINT('',#124034); +#124034 = CARTESIAN_POINT('',(105.705072,-136.062061,1.585)); +#124035 = LINE('',#124036,#124037); +#124036 = CARTESIAN_POINT('',(105.555652,-136.248834,1.585)); +#124037 = VECTOR('',#124038,1.); +#124038 = DIRECTION('',(0.624699126401,0.780865546348,0.)); +#124039 = ORIENTED_EDGE('',*,*,#124040,.T.); +#124040 = EDGE_CURVE('',#124033,#124041,#124043,.T.); +#124041 = VERTEX_POINT('',#124042); +#124042 = CARTESIAN_POINT('',(105.742426,-135.95,1.585)); +#124043 = LINE('',#124044,#124045); +#124044 = CARTESIAN_POINT('',(105.705072,-136.062061,1.585)); +#124045 = VECTOR('',#124046,1.); +#124046 = DIRECTION('',(0.316230305746,0.94868245147,0.)); +#124047 = ORIENTED_EDGE('',*,*,#124048,.T.); +#124048 = EDGE_CURVE('',#124041,#124049,#124051,.T.); +#124049 = VERTEX_POINT('',#124050); +#124050 = CARTESIAN_POINT('',(105.723753,-135.595142,1.585)); +#124051 = LINE('',#124052,#124053); +#124052 = CARTESIAN_POINT('',(105.742426,-135.95,1.585)); +#124053 = VECTOR('',#124054,1.); +#124054 = DIRECTION('',(-5.254834619069E-02,0.998618381221,0.)); +#124055 = ORIENTED_EDGE('',*,*,#124056,.T.); +#124056 = EDGE_CURVE('',#124049,#124057,#124059,.T.); +#124057 = VERTEX_POINT('',#124058); +#124058 = CARTESIAN_POINT('',(105.649047,-135.464395,1.585)); +#124059 = LINE('',#124060,#124061); +#124060 = CARTESIAN_POINT('',(105.723753,-135.595142,1.585)); +#124061 = VECTOR('',#124062,1.); +#124062 = DIRECTION('',(-0.496106040603,0.868261940014,0.)); +#124063 = ORIENTED_EDGE('',*,*,#124064,.T.); +#124064 = EDGE_CURVE('',#124057,#123958,#124065,.T.); +#124065 = LINE('',#124066,#124067); +#124066 = CARTESIAN_POINT('',(105.649047,-135.464395,1.585)); +#124067 = VECTOR('',#124068,1.); +#124068 = DIRECTION('',(-0.707136526721,0.707077034401,0.)); +#124069 = PLANE('',#124070); +#124070 = AXIS2_PLACEMENT_3D('',#124071,#124072,#124073); +#124071 = CARTESIAN_POINT('',(0.,0.,1.585)); +#124072 = DIRECTION('',(0.,0.,1.)); +#124073 = DIRECTION('',(1.,0.,-0.)); +#124074 = SHELL_BASED_SURFACE_MODEL('',(#124075)); +#124075 = OPEN_SHELL('',(#124076)); +#124076 = ADVANCED_FACE('',(#124077,#124247),#124369,.T.); +#124077 = FACE_BOUND('',#124078,.F.); +#124078 = EDGE_LOOP('',(#124079,#124089,#124097,#124105,#124113,#124121, + #124129,#124137,#124145,#124153,#124161,#124169,#124177,#124185, + #124193,#124201,#124209,#124217,#124225,#124233,#124241)); +#124079 = ORIENTED_EDGE('',*,*,#124080,.T.); +#124080 = EDGE_CURVE('',#124081,#124083,#124085,.T.); +#124081 = VERTEX_POINT('',#124082); +#124082 = CARTESIAN_POINT('',(90.968801,-134.455836,1.585)); +#124083 = VERTEX_POINT('',#124084); +#124084 = CARTESIAN_POINT('',(90.987476,-134.26906,1.585)); +#124085 = LINE('',#124086,#124087); +#124086 = CARTESIAN_POINT('',(90.968801,-134.455836,1.585)); +#124087 = VECTOR('',#124088,1.); +#124088 = DIRECTION('',(9.949000480092E-02,0.995038561537,0.)); +#124089 = ORIENTED_EDGE('',*,*,#124090,.T.); +#124090 = EDGE_CURVE('',#124083,#124091,#124093,.T.); +#124091 = VERTEX_POINT('',#124092); +#124092 = CARTESIAN_POINT('',(91.024835,-134.26906,1.585)); +#124093 = LINE('',#124094,#124095); +#124094 = CARTESIAN_POINT('',(90.987476,-134.26906,1.585)); +#124095 = VECTOR('',#124096,1.); +#124096 = DIRECTION('',(1.,0.,0.)); +#124097 = ORIENTED_EDGE('',*,*,#124098,.T.); +#124098 = EDGE_CURVE('',#124091,#124099,#124101,.T.); +#124099 = VERTEX_POINT('',#124100); +#124100 = CARTESIAN_POINT('',(91.454403,-134.642604,1.585)); +#124101 = LINE('',#124102,#124103); +#124102 = CARTESIAN_POINT('',(91.024835,-134.26906,1.585)); +#124103 = VECTOR('',#124104,1.); +#124104 = DIRECTION('',(0.754599773792,-0.656185325493,0.)); +#124105 = ORIENTED_EDGE('',*,*,#124106,.T.); +#124106 = EDGE_CURVE('',#124099,#124107,#124109,.T.); +#124107 = VERTEX_POINT('',#124108); +#124108 = CARTESIAN_POINT('',(91.809274,-134.866728,1.585)); +#124109 = LINE('',#124110,#124111); +#124110 = CARTESIAN_POINT('',(91.454403,-134.642604,1.585)); +#124111 = VECTOR('',#124112,1.); +#124112 = DIRECTION('',(0.845494338009,-0.533984385909,0.)); +#124113 = ORIENTED_EDGE('',*,*,#124114,.T.); +#124114 = EDGE_CURVE('',#124107,#124115,#124117,.T.); +#124115 = VERTEX_POINT('',#124116); +#124116 = CARTESIAN_POINT('',(92.089422,-135.090853,1.585)); +#124117 = LINE('',#124118,#124119); +#124118 = CARTESIAN_POINT('',(91.809274,-134.866728,1.585)); +#124119 = VECTOR('',#124120,1.); +#124120 = DIRECTION('',(0.780859835578,-0.624706264721,0.)); +#124121 = ORIENTED_EDGE('',*,*,#124122,.T.); +#124122 = EDGE_CURVE('',#124115,#124123,#124125,.T.); +#124123 = VERTEX_POINT('',#124124); +#124124 = CARTESIAN_POINT('',(92.126785,-135.090853,1.585)); +#124125 = LINE('',#124126,#124127); +#124126 = CARTESIAN_POINT('',(92.089422,-135.090853,1.585)); +#124127 = VECTOR('',#124128,1.); +#124128 = DIRECTION('',(1.,0.,0.)); +#124129 = ORIENTED_EDGE('',*,*,#124130,.T.); +#124130 = EDGE_CURVE('',#124123,#124131,#124133,.T.); +#124131 = VERTEX_POINT('',#124132); +#124132 = CARTESIAN_POINT('',(92.294879,-135.277626,1.585)); +#124133 = LINE('',#124134,#124135); +#124134 = CARTESIAN_POINT('',(92.126785,-135.090853,1.585)); +#124135 = VECTOR('',#124136,1.); +#124136 = DIRECTION('',(0.668960993789,-0.74329751028,0.)); +#124137 = ORIENTED_EDGE('',*,*,#124138,.T.); +#124138 = EDGE_CURVE('',#124131,#124139,#124141,.T.); +#124139 = VERTEX_POINT('',#124140); +#124140 = CARTESIAN_POINT('',(92.369582,-135.445712,1.585)); +#124141 = LINE('',#124142,#124143); +#124142 = CARTESIAN_POINT('',(92.294879,-135.277626,1.585)); +#124143 = VECTOR('',#124144,1.); +#124144 = DIRECTION('',(0.406129890789,-0.913815359801,0.)); +#124145 = ORIENTED_EDGE('',*,*,#124146,.T.); +#124146 = EDGE_CURVE('',#124139,#124147,#124149,.T.); +#124147 = VERTEX_POINT('',#124148); +#124148 = CARTESIAN_POINT('',(92.369582,-135.707206,1.585)); +#124149 = LINE('',#124150,#124151); +#124150 = CARTESIAN_POINT('',(92.369582,-135.445712,1.585)); +#124151 = VECTOR('',#124152,1.); +#124152 = DIRECTION('',(0.,-1.,0.)); +#124153 = ORIENTED_EDGE('',*,*,#124154,.T.); +#124154 = EDGE_CURVE('',#124147,#124155,#124157,.T.); +#124155 = VERTEX_POINT('',#124156); +#124156 = CARTESIAN_POINT('',(92.276201,-135.893978,1.585)); +#124157 = LINE('',#124158,#124159); +#124158 = CARTESIAN_POINT('',(92.369582,-135.707206,1.585)); +#124159 = VECTOR('',#124160,1.); +#124160 = DIRECTION('',(-0.447194439704,-0.894436768641,0.)); +#124161 = ORIENTED_EDGE('',*,*,#124162,.T.); +#124162 = EDGE_CURVE('',#124155,#124163,#124165,.T.); +#124163 = VERTEX_POINT('',#124164); +#124164 = CARTESIAN_POINT('',(92.145455,-136.024711,1.585)); +#124165 = LINE('',#124166,#124167); +#124166 = CARTESIAN_POINT('',(92.276201,-135.893978,1.585)); +#124167 = VECTOR('',#124168,1.); +#124168 = DIRECTION('',(-0.707141935672,-0.707071624954,0.)); +#124169 = ORIENTED_EDGE('',*,*,#124170,.T.); +#124170 = EDGE_CURVE('',#124163,#124171,#124173,.T.); +#124171 = VERTEX_POINT('',#124172); +#124172 = CARTESIAN_POINT('',(91.865301,-136.136776,1.585)); +#124173 = LINE('',#124174,#124175); +#124174 = CARTESIAN_POINT('',(92.145455,-136.024711,1.585)); +#124175 = VECTOR('',#124176,1.); +#124176 = DIRECTION('',(-0.928472805277,-0.371400390226,0.)); +#124177 = ORIENTED_EDGE('',*,*,#124178,.T.); +#124178 = EDGE_CURVE('',#124171,#124179,#124181,.T.); +#124179 = VERTEX_POINT('',#124180); +#124180 = CARTESIAN_POINT('',(91.585148,-136.118096,1.585)); +#124181 = LINE('',#124182,#124183); +#124182 = CARTESIAN_POINT('',(91.865301,-136.136776,1.585)); +#124183 = VECTOR('',#124184,1.); +#124184 = DIRECTION('',(-0.997784417114,6.653012072577E-02,0.)); +#124185 = ORIENTED_EDGE('',*,*,#124186,.T.); +#124186 = EDGE_CURVE('',#124179,#124187,#124189,.T.); +#124187 = VERTEX_POINT('',#124188); +#124188 = CARTESIAN_POINT('',(91.323667,-135.968676,1.585)); +#124189 = LINE('',#124190,#124191); +#124190 = CARTESIAN_POINT('',(91.585148,-136.118096,1.585)); +#124191 = VECTOR('',#124192,1.); +#124192 = DIRECTION('',(-0.86823987272,0.496144659772,0.)); +#124193 = ORIENTED_EDGE('',*,*,#124194,.T.); +#124194 = EDGE_CURVE('',#124187,#124195,#124197,.T.); +#124195 = VERTEX_POINT('',#124196); +#124196 = CARTESIAN_POINT('',(91.136895,-135.744559,1.585)); +#124197 = LINE('',#124198,#124199); +#124198 = CARTESIAN_POINT('',(91.323667,-135.968676,1.585)); +#124199 = VECTOR('',#124200,1.); +#124200 = DIRECTION('',(-0.640200245663,0.768208074322,0.)); +#124201 = ORIENTED_EDGE('',*,*,#124202,.T.); +#124202 = EDGE_CURVE('',#124195,#124203,#124205,.T.); +#124203 = VERTEX_POINT('',#124204); +#124204 = CARTESIAN_POINT('',(91.024835,-135.52043,1.585)); +#124205 = LINE('',#124206,#124207); +#124206 = CARTESIAN_POINT('',(91.136895,-135.744559,1.585)); +#124207 = VECTOR('',#124208,1.); +#124208 = DIRECTION('',(-0.447199228878,0.894434374167,0.)); +#124209 = ORIENTED_EDGE('',*,*,#124210,.T.); +#124210 = EDGE_CURVE('',#124203,#124211,#124213,.T.); +#124211 = VERTEX_POINT('',#124212); +#124212 = CARTESIAN_POINT('',(90.950119,-135.221594,1.585)); +#124213 = LINE('',#124214,#124215); +#124214 = CARTESIAN_POINT('',(91.024835,-135.52043,1.585)); +#124215 = VECTOR('',#124216,1.); +#124216 = DIRECTION('',(-0.242557012935,0.97013715292,0.)); +#124217 = ORIENTED_EDGE('',*,*,#124218,.T.); +#124218 = EDGE_CURVE('',#124211,#124219,#124221,.T.); +#124219 = VERTEX_POINT('',#124220); +#124220 = CARTESIAN_POINT('',(90.931446,-134.773337,1.585)); +#124221 = LINE('',#124222,#124223); +#124222 = CARTESIAN_POINT('',(90.950119,-135.221594,1.585)); +#124223 = VECTOR('',#124224,1.); +#124224 = DIRECTION('',(-4.16208100419E-02,0.999133478656,0.)); +#124225 = ORIENTED_EDGE('',*,*,#124226,.T.); +#124226 = EDGE_CURVE('',#124219,#124227,#124229,.T.); +#124227 = VERTEX_POINT('',#124228); +#124228 = CARTESIAN_POINT('',(90.950119,-134.754664,1.585)); +#124229 = LINE('',#124230,#124231); +#124230 = CARTESIAN_POINT('',(90.931446,-134.773337,1.585)); +#124231 = VECTOR('',#124232,1.); +#124232 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#124233 = ORIENTED_EDGE('',*,*,#124234,.T.); +#124234 = EDGE_CURVE('',#124227,#124235,#124237,.T.); +#124235 = VERTEX_POINT('',#124236); +#124236 = CARTESIAN_POINT('',(90.950119,-134.474509,1.585)); +#124237 = LINE('',#124238,#124239); +#124238 = CARTESIAN_POINT('',(90.950119,-134.754664,1.585)); +#124239 = VECTOR('',#124240,1.); +#124240 = DIRECTION('',(0.,1.,0.)); +#124241 = ORIENTED_EDGE('',*,*,#124242,.T.); +#124242 = EDGE_CURVE('',#124235,#124081,#124243,.T.); +#124243 = LINE('',#124244,#124245); +#124244 = CARTESIAN_POINT('',(90.950119,-134.474509,1.585)); +#124245 = VECTOR('',#124246,1.); +#124246 = DIRECTION('',(0.707277125028,0.706936396299,0.)); +#124247 = FACE_BOUND('',#124248,.F.); +#124248 = EDGE_LOOP('',(#124249,#124259,#124267,#124275,#124283,#124291, + #124299,#124307,#124315,#124323,#124331,#124339,#124347,#124355, + #124363)); +#124249 = ORIENTED_EDGE('',*,*,#124250,.T.); +#124250 = EDGE_CURVE('',#124251,#124253,#124255,.T.); +#124251 = VERTEX_POINT('',#124252); +#124252 = CARTESIAN_POINT('',(91.977363,-135.445712,1.585)); +#124253 = VERTEX_POINT('',#124254); +#124254 = CARTESIAN_POINT('',(91.771917,-135.258954,1.585)); +#124255 = LINE('',#124256,#124257); +#124256 = CARTESIAN_POINT('',(91.977363,-135.445712,1.585)); +#124257 = VECTOR('',#124258,1.); +#124258 = DIRECTION('',(-0.739959955897,0.672650922595,0.)); +#124259 = ORIENTED_EDGE('',*,*,#124260,.T.); +#124260 = EDGE_CURVE('',#124253,#124261,#124263,.T.); +#124261 = VERTEX_POINT('',#124262); +#124262 = CARTESIAN_POINT('',(91.286315,-134.941441,1.585)); +#124263 = LINE('',#124264,#124265); +#124264 = CARTESIAN_POINT('',(91.771917,-135.258954,1.585)); +#124265 = VECTOR('',#124266,1.); +#124266 = DIRECTION('',(-0.836966456175,0.547254192527,0.)); +#124267 = ORIENTED_EDGE('',*,*,#124268,.T.); +#124268 = EDGE_CURVE('',#124261,#124269,#124271,.T.); +#124269 = VERTEX_POINT('',#124270); +#124270 = CARTESIAN_POINT('',(91.267628,-134.960124,1.585)); +#124271 = LINE('',#124272,#124273); +#124272 = CARTESIAN_POINT('',(91.286315,-134.941441,1.585)); +#124273 = VECTOR('',#124274,1.); +#124274 = DIRECTION('',(-0.707182464241,-0.707031090031,0.)); +#124275 = ORIENTED_EDGE('',*,*,#124276,.T.); +#124276 = EDGE_CURVE('',#124269,#124277,#124279,.T.); +#124277 = VERTEX_POINT('',#124278); +#124278 = CARTESIAN_POINT('',(91.267628,-135.090853,1.585)); +#124279 = LINE('',#124280,#124281); +#124280 = CARTESIAN_POINT('',(91.267628,-134.960124,1.585)); +#124281 = VECTOR('',#124282,1.); +#124282 = DIRECTION('',(0.,-1.,0.)); +#124283 = ORIENTED_EDGE('',*,*,#124284,.T.); +#124284 = EDGE_CURVE('',#124277,#124285,#124287,.T.); +#124285 = VERTEX_POINT('',#124286); +#124286 = CARTESIAN_POINT('',(91.286315,-135.109529,1.585)); +#124287 = LINE('',#124288,#124289); +#124288 = CARTESIAN_POINT('',(91.267628,-135.090853,1.585)); +#124289 = VECTOR('',#124290,1.); +#124290 = DIRECTION('',(0.707314929067,-0.706898572016,0.)); +#124291 = ORIENTED_EDGE('',*,*,#124292,.T.); +#124292 = EDGE_CURVE('',#124285,#124293,#124295,.T.); +#124293 = VERTEX_POINT('',#124294); +#124294 = CARTESIAN_POINT('',(91.286315,-135.202919,1.585)); +#124295 = LINE('',#124296,#124297); +#124296 = CARTESIAN_POINT('',(91.286315,-135.109529,1.585)); +#124297 = VECTOR('',#124298,1.); +#124298 = DIRECTION('',(0.,-1.,0.)); +#124299 = ORIENTED_EDGE('',*,*,#124300,.T.); +#124300 = EDGE_CURVE('',#124293,#124301,#124303,.T.); +#124301 = VERTEX_POINT('',#124302); +#124302 = CARTESIAN_POINT('',(91.34235,-135.389689,1.585)); +#124303 = LINE('',#124304,#124305); +#124304 = CARTESIAN_POINT('',(91.286315,-135.202919,1.585)); +#124305 = VECTOR('',#124306,1.); +#124306 = DIRECTION('',(0.287366705119,-0.957820639154,0.)); +#124307 = ORIENTED_EDGE('',*,*,#124308,.T.); +#124308 = EDGE_CURVE('',#124301,#124309,#124311,.T.); +#124309 = VERTEX_POINT('',#124310); +#124310 = CARTESIAN_POINT('',(91.435725,-135.557784,1.585)); +#124311 = LINE('',#124312,#124313); +#124312 = CARTESIAN_POINT('',(91.34235,-135.389689,1.585)); +#124313 = VECTOR('',#124314,1.); +#124314 = DIRECTION('',(0.485598775181,-0.874181805772,0.)); +#124315 = ORIENTED_EDGE('',*,*,#124316,.T.); +#124316 = EDGE_CURVE('',#124309,#124317,#124319,.T.); +#124317 = VERTEX_POINT('',#124318); +#124318 = CARTESIAN_POINT('',(91.622501,-135.744559,1.585)); +#124319 = LINE('',#124320,#124321); +#124320 = CARTESIAN_POINT('',(91.435725,-135.557784,1.585)); +#124321 = VECTOR('',#124322,1.); +#124322 = DIRECTION('',(0.707108674116,-0.707104888252,0.)); +#124323 = ORIENTED_EDGE('',*,*,#124324,.T.); +#124324 = EDGE_CURVE('',#124317,#124325,#124327,.T.); +#124325 = VERTEX_POINT('',#124326); +#124326 = CARTESIAN_POINT('',(91.69721,-135.78191,1.585)); +#124327 = LINE('',#124328,#124329); +#124328 = CARTESIAN_POINT('',(91.622501,-135.744559,1.585)); +#124329 = VECTOR('',#124330,1.); +#124330 = DIRECTION('',(0.894443951693,-0.447180072544,0.)); +#124331 = ORIENTED_EDGE('',*,*,#124332,.T.); +#124332 = EDGE_CURVE('',#124325,#124333,#124335,.T.); +#124333 = VERTEX_POINT('',#124334); +#124334 = CARTESIAN_POINT('',(91.827944,-135.800585,1.585)); +#124335 = LINE('',#124336,#124337); +#124336 = CARTESIAN_POINT('',(91.69721,-135.78191,1.585)); +#124337 = VECTOR('',#124338,1.); +#124338 = DIRECTION('',(0.989950856621,-0.141411815193,0.)); +#124339 = ORIENTED_EDGE('',*,*,#124340,.T.); +#124340 = EDGE_CURVE('',#124333,#124341,#124343,.T.); +#124341 = VERTEX_POINT('',#124342); +#124342 = CARTESIAN_POINT('',(91.883976,-135.78191,1.585)); +#124343 = LINE('',#124344,#124345); +#124344 = CARTESIAN_POINT('',(91.827944,-135.800585,1.585)); +#124345 = VECTOR('',#124346,1.); +#124346 = DIRECTION('',(0.948695149301,0.316192210044,0.)); +#124347 = ORIENTED_EDGE('',*,*,#124348,.T.); +#124348 = EDGE_CURVE('',#124341,#124349,#124351,.T.); +#124349 = VERTEX_POINT('',#124350); +#124350 = CARTESIAN_POINT('',(91.996049,-135.66985,1.585)); +#124351 = LINE('',#124352,#124353); +#124352 = CARTESIAN_POINT('',(91.883976,-135.78191,1.585)); +#124353 = VECTOR('',#124354,1.); +#124354 = DIRECTION('',(0.707147793093,0.707065766902,0.)); +#124355 = ORIENTED_EDGE('',*,*,#124356,.T.); +#124356 = EDGE_CURVE('',#124349,#124357,#124359,.T.); +#124357 = VERTEX_POINT('',#124358); +#124358 = CARTESIAN_POINT('',(91.996049,-135.483078,1.585)); +#124359 = LINE('',#124360,#124361); +#124360 = CARTESIAN_POINT('',(91.996049,-135.66985,1.585)); +#124361 = VECTOR('',#124362,1.); +#124362 = DIRECTION('',(0.,1.,0.)); +#124363 = ORIENTED_EDGE('',*,*,#124364,.T.); +#124364 = EDGE_CURVE('',#124357,#124251,#124365,.T.); +#124365 = LINE('',#124366,#124367); +#124366 = CARTESIAN_POINT('',(91.996049,-135.483078,1.585)); +#124367 = VECTOR('',#124368,1.); +#124368 = DIRECTION('',(-0.447271041356,0.894398465766,0.)); +#124369 = PLANE('',#124370); +#124370 = AXIS2_PLACEMENT_3D('',#124371,#124372,#124373); +#124371 = CARTESIAN_POINT('',(0.,0.,1.585)); +#124372 = DIRECTION('',(0.,0.,1.)); +#124373 = DIRECTION('',(1.,0.,-0.)); +#124374 = SHELL_BASED_SURFACE_MODEL('',(#124375)); +#124375 = OPEN_SHELL('',(#124376)); +#124376 = ADVANCED_FACE('',(#124377,#124540),#124630,.T.); +#124377 = FACE_BOUND('',#124378,.F.); +#124378 = EDGE_LOOP('',(#124379,#124389,#124397,#124405,#124413,#124421, + #124429,#124437,#124445,#124453,#124461,#124469,#124477,#124486, + #124494,#124502,#124510,#124518,#124526,#124534)); +#124379 = ORIENTED_EDGE('',*,*,#124380,.T.); +#124380 = EDGE_CURVE('',#124381,#124383,#124385,.T.); +#124381 = VERTEX_POINT('',#124382); +#124382 = CARTESIAN_POINT('',(94.031852,-134.810694,1.585)); +#124383 = VERTEX_POINT('',#124384); +#124384 = CARTESIAN_POINT('',(94.06921,-134.810694,1.585)); +#124385 = LINE('',#124386,#124387); +#124386 = CARTESIAN_POINT('',(94.031852,-134.810694,1.585)); +#124387 = VECTOR('',#124388,1.); +#124388 = DIRECTION('',(1.,0.,0.)); +#124389 = ORIENTED_EDGE('',*,*,#124390,.T.); +#124390 = EDGE_CURVE('',#124383,#124391,#124393,.T.); +#124391 = VERTEX_POINT('',#124392); +#124392 = CARTESIAN_POINT('',(94.741583,-134.28774,1.585)); +#124393 = LINE('',#124394,#124395); +#124394 = CARTESIAN_POINT('',(94.06921,-134.810694,1.585)); +#124395 = VECTOR('',#124396,1.); +#124396 = DIRECTION('',(0.789353797734,0.613938581621,0.)); +#124397 = ORIENTED_EDGE('',*,*,#124398,.T.); +#124398 = EDGE_CURVE('',#124391,#124399,#124401,.T.); +#124399 = VERTEX_POINT('',#124400); +#124400 = CARTESIAN_POINT('',(94.778942,-134.343775,1.585)); +#124401 = LINE('',#124402,#124403); +#124402 = CARTESIAN_POINT('',(94.741583,-134.28774,1.585)); +#124403 = VECTOR('',#124404,1.); +#124404 = DIRECTION('',(0.554724181993,-0.832034303327,0.)); +#124405 = ORIENTED_EDGE('',*,*,#124406,.T.); +#124406 = EDGE_CURVE('',#124399,#124407,#124409,.T.); +#124407 = VERTEX_POINT('',#124408); +#124408 = CARTESIAN_POINT('',(94.797618,-134.605251,1.585)); +#124409 = LINE('',#124410,#124411); +#124410 = CARTESIAN_POINT('',(94.778942,-134.343775,1.585)); +#124411 = VECTOR('',#124412,1.); +#124412 = DIRECTION('',(7.124379682136E-02,-0.997458932194,0.)); +#124413 = ORIENTED_EDGE('',*,*,#124414,.T.); +#124414 = EDGE_CURVE('',#124407,#124415,#124417,.T.); +#124415 = VERTEX_POINT('',#124416); +#124416 = CARTESIAN_POINT('',(94.816295,-134.623926,1.585)); +#124417 = LINE('',#124418,#124419); +#124418 = CARTESIAN_POINT('',(94.797618,-134.605251,1.585)); +#124419 = VECTOR('',#124420,1.); +#124420 = DIRECTION('',(0.707144641962,-0.707068918384,0.)); +#124421 = ORIENTED_EDGE('',*,*,#124422,.T.); +#124422 = EDGE_CURVE('',#124415,#124423,#124425,.T.); +#124423 = VERTEX_POINT('',#124424); +#124424 = CARTESIAN_POINT('',(94.816295,-135.090853,1.585)); +#124425 = LINE('',#124426,#124427); +#124426 = CARTESIAN_POINT('',(94.816295,-134.623926,1.585)); +#124427 = VECTOR('',#124428,1.); +#124428 = DIRECTION('',(0.,-1.,0.)); +#124429 = ORIENTED_EDGE('',*,*,#124430,.T.); +#124430 = EDGE_CURVE('',#124423,#124431,#124433,.T.); +#124431 = VERTEX_POINT('',#124432); +#124432 = CARTESIAN_POINT('',(94.722909,-135.52043,1.585)); +#124433 = LINE('',#124434,#124435); +#124434 = CARTESIAN_POINT('',(94.816295,-135.090853,1.585)); +#124435 = VECTOR('',#124436,1.); +#124436 = DIRECTION('',(-0.21242898326,-0.977176507634,0.)); +#124437 = ORIENTED_EDGE('',*,*,#124438,.T.); +#124438 = EDGE_CURVE('',#124431,#124439,#124441,.T.); +#124439 = VERTEX_POINT('',#124440); +#124440 = CARTESIAN_POINT('',(94.592174,-135.763233,1.585)); +#124441 = LINE('',#124442,#124443); +#124442 = CARTESIAN_POINT('',(94.722909,-135.52043,1.585)); +#124443 = VECTOR('',#124444,1.); +#124444 = DIRECTION('',(-0.474085550618,-0.880478784921,0.)); +#124445 = ORIENTED_EDGE('',*,*,#124446,.T.); +#124446 = EDGE_CURVE('',#124439,#124447,#124449,.T.); +#124447 = VERTEX_POINT('',#124448); +#124448 = CARTESIAN_POINT('',(94.405396,-135.968676,1.585)); +#124449 = LINE('',#124450,#124451); +#124450 = CARTESIAN_POINT('',(94.592174,-135.763233,1.585)); +#124451 = VECTOR('',#124452,1.); +#124452 = DIRECTION('',(-0.67269573948,-0.739919213216,0.)); +#124453 = ORIENTED_EDGE('',*,*,#124454,.T.); +#124454 = EDGE_CURVE('',#124447,#124455,#124457,.T.); +#124455 = VERTEX_POINT('',#124456); +#124456 = CARTESIAN_POINT('',(94.274651,-136.062061,1.585)); +#124457 = LINE('',#124458,#124459); +#124458 = CARTESIAN_POINT('',(94.405396,-135.968676,1.585)); +#124459 = VECTOR('',#124460,1.); +#124460 = DIRECTION('',(-0.813746087064,-0.581220531114,0.)); +#124461 = ORIENTED_EDGE('',*,*,#124462,.T.); +#124462 = EDGE_CURVE('',#124455,#124463,#124465,.T.); +#124463 = VERTEX_POINT('',#124464); +#124464 = CARTESIAN_POINT('',(94.106564,-136.136776,1.585)); +#124465 = LINE('',#124466,#124467); +#124466 = CARTESIAN_POINT('',(94.274651,-136.062061,1.585)); +#124467 = VECTOR('',#124468,1.); +#124468 = DIRECTION('',(-0.913792043698,-0.406182349289,0.)); +#124469 = ORIENTED_EDGE('',*,*,#124470,.T.); +#124470 = EDGE_CURVE('',#124463,#124471,#124473,.T.); +#124471 = VERTEX_POINT('',#124472); +#124472 = CARTESIAN_POINT('',(93.826404,-136.136776,1.585)); +#124473 = LINE('',#124474,#124475); +#124474 = CARTESIAN_POINT('',(94.106564,-136.136776,1.585)); +#124475 = VECTOR('',#124476,1.); +#124476 = DIRECTION('',(-1.,0.,0.)); +#124477 = ORIENTED_EDGE('',*,*,#124478,.T.); +#124478 = EDGE_CURVE('',#124471,#124479,#124481,.T.); +#124479 = VERTEX_POINT('',#124480); +#124480 = CARTESIAN_POINT('',(93.396831,-135.763233,1.585)); +#124481 = CIRCLE('',#124482,0.550647120207); +#124482 = AXIS2_PLACEMENT_3D('',#124483,#124484,#124485); +#124483 = CARTESIAN_POINT('',(93.920925050779,-135.5943020172,1.585)); +#124484 = DIRECTION('',(0.,0.,-1.)); +#124485 = DIRECTION('',(-0.171654490345,-0.985157213821,-0.)); +#124486 = ORIENTED_EDGE('',*,*,#124487,.T.); +#124487 = EDGE_CURVE('',#124479,#124488,#124490,.T.); +#124488 = VERTEX_POINT('',#124489); +#124489 = CARTESIAN_POINT('',(93.378156,-135.66985,1.585)); +#124490 = LINE('',#124491,#124492); +#124491 = CARTESIAN_POINT('',(93.396831,-135.763233,1.585)); +#124492 = VECTOR('',#124493,1.); +#124493 = DIRECTION('',(-0.196099980237,0.980583906533,0.)); +#124494 = ORIENTED_EDGE('',*,*,#124495,.T.); +#124495 = EDGE_CURVE('',#124488,#124496,#124498,.T.); +#124496 = VERTEX_POINT('',#124497); +#124497 = CARTESIAN_POINT('',(93.378156,-135.501753,1.585)); +#124498 = LINE('',#124499,#124500); +#124499 = CARTESIAN_POINT('',(93.378156,-135.66985,1.585)); +#124500 = VECTOR('',#124501,1.); +#124501 = DIRECTION('',(0.,1.,0.)); +#124502 = ORIENTED_EDGE('',*,*,#124503,.T.); +#124503 = EDGE_CURVE('',#124496,#124504,#124506,.T.); +#124504 = VERTEX_POINT('',#124505); +#124505 = CARTESIAN_POINT('',(93.452857,-135.296307,1.585)); +#124506 = LINE('',#124507,#124508); +#124507 = CARTESIAN_POINT('',(93.378156,-135.501753,1.585)); +#124508 = VECTOR('',#124509,1.); +#124509 = DIRECTION('',(0.34171625064,0.939803173036,0.)); +#124510 = ORIENTED_EDGE('',*,*,#124511,.T.); +#124511 = EDGE_CURVE('',#124504,#124512,#124514,.T.); +#124512 = VERTEX_POINT('',#124513); +#124513 = CARTESIAN_POINT('',(93.714345,-135.034831,1.585)); +#124514 = LINE('',#124515,#124516); +#124515 = CARTESIAN_POINT('',(93.452857,-135.296307,1.585)); +#124516 = VECTOR('',#124517,1.); +#124517 = DIRECTION('',(0.707123006365,0.707090555636,0.)); +#124518 = ORIENTED_EDGE('',*,*,#124519,.T.); +#124519 = EDGE_CURVE('',#124512,#124520,#124522,.T.); +#124520 = VERTEX_POINT('',#124521); +#124521 = CARTESIAN_POINT('',(93.751692,-135.034831,1.585)); +#124522 = LINE('',#124523,#124524); +#124523 = CARTESIAN_POINT('',(93.714345,-135.034831,1.585)); +#124524 = VECTOR('',#124525,1.); +#124525 = DIRECTION('',(1.,0.,0.)); +#124526 = ORIENTED_EDGE('',*,*,#124527,.T.); +#124527 = EDGE_CURVE('',#124520,#124528,#124530,.T.); +#124528 = VERTEX_POINT('',#124529); +#124529 = CARTESIAN_POINT('',(94.013174,-134.848052,1.585)); +#124530 = LINE('',#124531,#124532); +#124531 = CARTESIAN_POINT('',(93.751692,-135.034831,1.585)); +#124532 = VECTOR('',#124533,1.); +#124533 = DIRECTION('',(0.813724429571,0.581250851802,0.)); +#124534 = ORIENTED_EDGE('',*,*,#124535,.T.); +#124535 = EDGE_CURVE('',#124528,#124381,#124536,.T.); +#124536 = LINE('',#124537,#124538); +#124537 = CARTESIAN_POINT('',(94.013174,-134.848052,1.585)); +#124538 = VECTOR('',#124539,1.); +#124539 = DIRECTION('',(0.447194441551,0.894436767718,0.)); +#124540 = FACE_BOUND('',#124541,.F.); +#124541 = EDGE_LOOP('',(#124542,#124552,#124560,#124568,#124576,#124584, + #124592,#124600,#124608,#124616,#124624)); +#124542 = ORIENTED_EDGE('',*,*,#124543,.T.); +#124543 = EDGE_CURVE('',#124544,#124546,#124548,.T.); +#124544 = VERTEX_POINT('',#124545); +#124545 = CARTESIAN_POINT('',(94.461426,-135.240275,1.585)); +#124546 = VERTEX_POINT('',#124547); +#124547 = CARTESIAN_POINT('',(94.480104,-134.978789,1.585)); +#124548 = LINE('',#124549,#124550); +#124549 = CARTESIAN_POINT('',(94.461426,-135.240275,1.585)); +#124550 = VECTOR('',#124551,1.); +#124551 = DIRECTION('',(7.12486765081E-02,0.997458583649,0.)); +#124552 = ORIENTED_EDGE('',*,*,#124553,.T.); +#124553 = EDGE_CURVE('',#124546,#124554,#124556,.T.); +#124554 = VERTEX_POINT('',#124555); +#124555 = CARTESIAN_POINT('',(94.461426,-134.960124,1.585)); +#124556 = LINE('',#124557,#124558); +#124557 = CARTESIAN_POINT('',(94.480104,-134.978789,1.585)); +#124558 = VECTOR('',#124559,1.); +#124559 = DIRECTION('',(-0.707352899269,0.70686057741,0.)); +#124560 = ORIENTED_EDGE('',*,*,#124561,.T.); +#124561 = EDGE_CURVE('',#124554,#124562,#124564,.T.); +#124562 = VERTEX_POINT('',#124563); +#124563 = CARTESIAN_POINT('',(93.975823,-135.277626,1.585)); +#124564 = LINE('',#124565,#124566); +#124565 = CARTESIAN_POINT('',(94.461426,-134.960124,1.585)); +#124566 = VECTOR('',#124567,1.); +#124567 = DIRECTION('',(-0.836975656276,-0.547240121702,0.)); +#124568 = ORIENTED_EDGE('',*,*,#124569,.T.); +#124569 = EDGE_CURVE('',#124562,#124570,#124572,.T.); +#124570 = VERTEX_POINT('',#124571); +#124571 = CARTESIAN_POINT('',(93.789049,-135.445712,1.585)); +#124572 = LINE('',#124573,#124574); +#124573 = CARTESIAN_POINT('',(93.975823,-135.277626,1.585)); +#124574 = VECTOR('',#124575,1.); +#124575 = DIRECTION('',(-0.743315122059,-0.66894142443,0.)); +#124576 = ORIENTED_EDGE('',*,*,#124577,.T.); +#124577 = EDGE_CURVE('',#124570,#124578,#124580,.T.); +#124578 = VERTEX_POINT('',#124579); +#124579 = CARTESIAN_POINT('',(93.751692,-135.52043,1.585)); +#124580 = LINE('',#124581,#124582); +#124581 = CARTESIAN_POINT('',(93.789049,-135.445712,1.585)); +#124582 = VECTOR('',#124583,1.); +#124583 = DIRECTION('',(-0.447194442063,-0.894436767462,0.)); +#124584 = ORIENTED_EDGE('',*,*,#124585,.T.); +#124585 = EDGE_CURVE('',#124578,#124586,#124588,.T.); +#124586 = VERTEX_POINT('',#124587); +#124587 = CARTESIAN_POINT('',(93.751692,-135.66985,1.585)); +#124588 = LINE('',#124589,#124590); +#124589 = CARTESIAN_POINT('',(93.751692,-135.52043,1.585)); +#124590 = VECTOR('',#124591,1.); +#124591 = DIRECTION('',(0.,-1.,0.)); +#124592 = ORIENTED_EDGE('',*,*,#124593,.T.); +#124593 = EDGE_CURVE('',#124586,#124594,#124596,.T.); +#124594 = VERTEX_POINT('',#124595); +#124595 = CARTESIAN_POINT('',(93.845079,-135.78191,1.585)); +#124596 = LINE('',#124597,#124598); +#124597 = CARTESIAN_POINT('',(93.751692,-135.66985,1.585)); +#124598 = VECTOR('',#124599,1.); +#124599 = DIRECTION('',(0.640199234042,-0.768208917373,0.)); +#124600 = ORIENTED_EDGE('',*,*,#124601,.T.); +#124601 = EDGE_CURVE('',#124594,#124602,#124604,.T.); +#124602 = VERTEX_POINT('',#124603); +#124603 = CARTESIAN_POINT('',(94.031852,-135.800585,1.585)); +#124604 = LINE('',#124605,#124606); +#124605 = CARTESIAN_POINT('',(93.845079,-135.78191,1.585)); +#124606 = VECTOR('',#124607,1.); +#124607 = DIRECTION('',(0.995038403335,-9.949158701896E-02,0.)); +#124608 = ORIENTED_EDGE('',*,*,#124609,.T.); +#124609 = EDGE_CURVE('',#124602,#124610,#124612,.T.); +#124610 = VERTEX_POINT('',#124611); +#124611 = CARTESIAN_POINT('',(94.106564,-135.763233,1.585)); +#124612 = LINE('',#124613,#124614); +#124613 = CARTESIAN_POINT('',(94.031852,-135.800585,1.585)); +#124614 = VECTOR('',#124615,1.); +#124615 = DIRECTION('',(0.894446345257,0.447175284935,0.)); +#124616 = ORIENTED_EDGE('',*,*,#124617,.T.); +#124617 = EDGE_CURVE('',#124610,#124618,#124620,.T.); +#124618 = VERTEX_POINT('',#124619); +#124619 = CARTESIAN_POINT('',(94.349367,-135.501753,1.585)); +#124620 = LINE('',#124621,#124622); +#124621 = CARTESIAN_POINT('',(94.106564,-135.763233,1.585)); +#124622 = VECTOR('',#124623,1.); +#124623 = DIRECTION('',(0.680451314352,0.732793291997,0.)); +#124624 = ORIENTED_EDGE('',*,*,#124625,.T.); +#124625 = EDGE_CURVE('',#124618,#124544,#124626,.T.); +#124626 = LINE('',#124627,#124628); +#124627 = CARTESIAN_POINT('',(94.349367,-135.501753,1.585)); +#124628 = VECTOR('',#124629,1.); +#124629 = DIRECTION('',(0.393910389333,0.919148848215,0.)); +#124630 = PLANE('',#124631); +#124631 = AXIS2_PLACEMENT_3D('',#124632,#124633,#124634); +#124632 = CARTESIAN_POINT('',(0.,0.,1.585)); +#124633 = DIRECTION('',(0.,0.,1.)); +#124634 = DIRECTION('',(1.,0.,-0.)); +#124635 = SHELL_BASED_SURFACE_MODEL('',(#124636)); +#124636 = OPEN_SHELL('',(#124637)); +#124637 = ADVANCED_FACE('',(#124638,#125200),#125674,.T.); +#124638 = FACE_BOUND('',#124639,.F.); +#124639 = EDGE_LOOP('',(#124640,#124650,#124658,#124666,#124674,#124682, + #124690,#124698,#124706,#124714,#124722,#124730,#124738,#124746, + #124754,#124762,#124770,#124778,#124786,#124794,#124802,#124810, + #124818,#124826,#124834,#124842,#124850,#124858,#124866,#124874, + #124882,#124890,#124898,#124906,#124914,#124922,#124930,#124938, + #124946,#124954,#124962,#124970,#124978,#124986,#124994,#125002, + #125010,#125018,#125026,#125034,#125042,#125050,#125058,#125066, + #125074,#125082,#125090,#125098,#125106,#125114,#125122,#125130, + #125138,#125146,#125154,#125162,#125170,#125178,#125186,#125194)); +#124640 = ORIENTED_EDGE('',*,*,#124641,.T.); +#124641 = EDGE_CURVE('',#124642,#124644,#124646,.T.); +#124642 = VERTEX_POINT('',#124643); +#124643 = CARTESIAN_POINT('',(92.612384,-132.214581,1.585)); +#124644 = VERTEX_POINT('',#124645); +#124645 = CARTESIAN_POINT('',(92.631068,-132.195896,1.585)); +#124646 = LINE('',#124647,#124648); +#124647 = CARTESIAN_POINT('',(92.612384,-132.214581,1.585)); +#124648 = VECTOR('',#124649,1.); +#124649 = DIRECTION('',(0.70708785865,0.707125703216,0.)); +#124650 = ORIENTED_EDGE('',*,*,#124651,.T.); +#124651 = EDGE_CURVE('',#124644,#124652,#124654,.T.); +#124652 = VERTEX_POINT('',#124653); +#124653 = CARTESIAN_POINT('',(93.060636,-132.195896,1.585)); +#124654 = LINE('',#124655,#124656); +#124655 = CARTESIAN_POINT('',(92.631068,-132.195896,1.585)); +#124656 = VECTOR('',#124657,1.); +#124657 = DIRECTION('',(1.,0.,0.)); +#124658 = ORIENTED_EDGE('',*,*,#124659,.T.); +#124659 = EDGE_CURVE('',#124652,#124660,#124662,.T.); +#124660 = VERTEX_POINT('',#124661); +#124661 = CARTESIAN_POINT('',(93.228736,-132.233253,1.585)); +#124662 = LINE('',#124663,#124664); +#124663 = CARTESIAN_POINT('',(93.060636,-132.195896,1.585)); +#124664 = VECTOR('',#124665,1.); +#124665 = DIRECTION('',(0.97618528384,-0.21693845121,0.)); +#124666 = ORIENTED_EDGE('',*,*,#124667,.T.); +#124667 = EDGE_CURVE('',#124660,#124668,#124670,.T.); +#124668 = VERTEX_POINT('',#124669); +#124669 = CARTESIAN_POINT('',(93.359473,-132.233253,1.585)); +#124670 = LINE('',#124671,#124672); +#124671 = CARTESIAN_POINT('',(93.228736,-132.233253,1.585)); +#124672 = VECTOR('',#124673,1.); +#124673 = DIRECTION('',(1.,0.,0.)); +#124674 = ORIENTED_EDGE('',*,*,#124675,.T.); +#124675 = EDGE_CURVE('',#124668,#124676,#124678,.T.); +#124676 = VERTEX_POINT('',#124677); +#124677 = CARTESIAN_POINT('',(93.882437,-132.363993,1.585)); +#124678 = LINE('',#124679,#124680); +#124679 = CARTESIAN_POINT('',(93.359473,-132.233253,1.585)); +#124680 = VECTOR('',#124681,1.); +#124681 = DIRECTION('',(0.970142936634,-0.242533879073,0.)); +#124682 = ORIENTED_EDGE('',*,*,#124683,.T.); +#124683 = EDGE_CURVE('',#124676,#124684,#124686,.T.); +#124684 = VERTEX_POINT('',#124685); +#124685 = CARTESIAN_POINT('',(94.386719,-132.60679,1.585)); +#124686 = LINE('',#124687,#124688); +#124687 = CARTESIAN_POINT('',(93.882437,-132.363993,1.585)); +#124688 = VECTOR('',#124689,1.); +#124689 = DIRECTION('',(0.901005471954,-0.433807721818,0.)); +#124690 = ORIENTED_EDGE('',*,*,#124691,.T.); +#124691 = EDGE_CURVE('',#124684,#124692,#124694,.T.); +#124692 = VERTEX_POINT('',#124693); +#124693 = CARTESIAN_POINT('',(94.760264,-132.868274,1.585)); +#124694 = LINE('',#124695,#124696); +#124695 = CARTESIAN_POINT('',(94.386719,-132.60679,1.585)); +#124696 = VECTOR('',#124697,1.); +#124697 = DIRECTION('',(0.819229344698,-0.573466024091,0.)); +#124698 = ORIENTED_EDGE('',*,*,#124699,.T.); +#124699 = EDGE_CURVE('',#124692,#124700,#124702,.T.); +#124700 = VERTEX_POINT('',#124701); +#124701 = CARTESIAN_POINT('',(94.85364,-132.96166,1.585)); +#124702 = LINE('',#124703,#124704); +#124703 = CARTESIAN_POINT('',(94.760264,-132.868274,1.585)); +#124704 = VECTOR('',#124705,1.); +#124705 = DIRECTION('',(0.707068918789,-0.707144641557,0.)); +#124706 = ORIENTED_EDGE('',*,*,#124707,.T.); +#124707 = EDGE_CURVE('',#124700,#124708,#124710,.T.); +#124708 = VERTEX_POINT('',#124709); +#124709 = CARTESIAN_POINT('',(94.909679,-132.980337,1.585)); +#124710 = LINE('',#124711,#124712); +#124711 = CARTESIAN_POINT('',(94.85364,-132.96166,1.585)); +#124712 = VECTOR('',#124713,1.); +#124713 = DIRECTION('',(0.94869684056,-0.316187135587,0.)); +#124714 = ORIENTED_EDGE('',*,*,#124715,.T.); +#124715 = EDGE_CURVE('',#124708,#124716,#124718,.T.); +#124716 = VERTEX_POINT('',#124717); +#124717 = CARTESIAN_POINT('',(95.264543,-133.353875,1.585)); +#124718 = LINE('',#124719,#124720); +#124719 = CARTESIAN_POINT('',(94.909679,-132.980337,1.585)); +#124720 = VECTOR('',#124721,1.); +#124721 = DIRECTION('',(0.688752420429,-0.724996622994,0.)); +#124722 = ORIENTED_EDGE('',*,*,#124723,.T.); +#124723 = EDGE_CURVE('',#124716,#124724,#124726,.T.); +#124724 = VERTEX_POINT('',#124725); +#124725 = CARTESIAN_POINT('',(95.264543,-133.391234,1.585)); +#124726 = LINE('',#124727,#124728); +#124727 = CARTESIAN_POINT('',(95.264543,-133.353875,1.585)); +#124728 = VECTOR('',#124729,1.); +#124729 = DIRECTION('',(0.,-1.,0.)); +#124730 = ORIENTED_EDGE('',*,*,#124731,.T.); +#124731 = EDGE_CURVE('',#124724,#124732,#124734,.T.); +#124732 = VERTEX_POINT('',#124733); +#124733 = CARTESIAN_POINT('',(95.451309,-133.634038,1.585)); +#124734 = LINE('',#124735,#124736); +#124735 = CARTESIAN_POINT('',(95.264543,-133.391234,1.585)); +#124736 = VECTOR('',#124737,1.); +#124737 = DIRECTION('',(0.609697824121,-0.792633940267,0.)); +#124738 = ORIENTED_EDGE('',*,*,#124739,.T.); +#124739 = EDGE_CURVE('',#124732,#124740,#124742,.T.); +#124740 = VERTEX_POINT('',#124741); +#124741 = CARTESIAN_POINT('',(95.65676,-134.007581,1.585)); +#124742 = LINE('',#124743,#124744); +#124743 = CARTESIAN_POINT('',(95.451309,-133.634038,1.585)); +#124744 = VECTOR('',#124745,1.); +#124745 = DIRECTION('',(0.481922981902,-0.876213580992,0.)); +#124746 = ORIENTED_EDGE('',*,*,#124747,.T.); +#124747 = EDGE_CURVE('',#124740,#124748,#124750,.T.); +#124748 = VERTEX_POINT('',#124749); +#124749 = CARTESIAN_POINT('',(95.806182,-134.455836,1.585)); +#124750 = LINE('',#124751,#124752); +#124751 = CARTESIAN_POINT('',(95.65676,-134.007581,1.585)); +#124752 = VECTOR('',#124753,1.); +#124753 = DIRECTION('',(0.316234750085,-0.948680969999,0.)); +#124754 = ORIENTED_EDGE('',*,*,#124755,.T.); +#124755 = EDGE_CURVE('',#124748,#124756,#124758,.T.); +#124756 = VERTEX_POINT('',#124757); +#124757 = CARTESIAN_POINT('',(95.843545,-134.642604,1.585)); +#124758 = LINE('',#124759,#124760); +#124759 = CARTESIAN_POINT('',(95.806182,-134.455836,1.585)); +#124760 = VECTOR('',#124761,1.); +#124761 = DIRECTION('',(0.196163588728,-0.980571183779,0.)); +#124762 = ORIENTED_EDGE('',*,*,#124763,.T.); +#124763 = EDGE_CURVE('',#124756,#124764,#124766,.T.); +#124764 = VERTEX_POINT('',#124765); +#124765 = CARTESIAN_POINT('',(95.843545,-134.773337,1.585)); +#124766 = LINE('',#124767,#124768); +#124767 = CARTESIAN_POINT('',(95.843545,-134.642604,1.585)); +#124768 = VECTOR('',#124769,1.); +#124769 = DIRECTION('',(0.,-1.,0.)); +#124770 = ORIENTED_EDGE('',*,*,#124771,.T.); +#124771 = EDGE_CURVE('',#124764,#124772,#124774,.T.); +#124772 = VERTEX_POINT('',#124773); +#124773 = CARTESIAN_POINT('',(95.86221,-134.792014,1.585)); +#124774 = LINE('',#124775,#124776); +#124775 = CARTESIAN_POINT('',(95.843545,-134.773337,1.585)); +#124776 = VECTOR('',#124777,1.); +#124777 = DIRECTION('',(0.706879513115,-0.707333976236,0.)); +#124778 = ORIENTED_EDGE('',*,*,#124779,.T.); +#124779 = EDGE_CURVE('',#124772,#124780,#124782,.T.); +#124780 = VERTEX_POINT('',#124781); +#124781 = CARTESIAN_POINT('',(95.86221,-134.941441,1.585)); +#124782 = LINE('',#124783,#124784); +#124783 = CARTESIAN_POINT('',(95.86221,-134.792014,1.585)); +#124784 = VECTOR('',#124785,1.); +#124785 = DIRECTION('',(0.,-1.,0.)); +#124786 = ORIENTED_EDGE('',*,*,#124787,.T.); +#124787 = EDGE_CURVE('',#124780,#124788,#124790,.T.); +#124788 = VERTEX_POINT('',#124789); +#124789 = CARTESIAN_POINT('',(95.880892,-134.960124,1.585)); +#124790 = LINE('',#124791,#124792); +#124791 = CARTESIAN_POINT('',(95.86221,-134.941441,1.585)); +#124792 = VECTOR('',#124793,1.); +#124793 = DIRECTION('',(0.707087856625,-0.707125705242,0.)); +#124794 = ORIENTED_EDGE('',*,*,#124795,.T.); +#124795 = EDGE_CURVE('',#124788,#124796,#124798,.T.); +#124796 = VERTEX_POINT('',#124797); +#124797 = CARTESIAN_POINT('',(95.880892,-135.389689,1.585)); +#124798 = LINE('',#124799,#124800); +#124799 = CARTESIAN_POINT('',(95.880892,-134.960124,1.585)); +#124800 = VECTOR('',#124801,1.); +#124801 = DIRECTION('',(0.,-1.,0.)); +#124802 = ORIENTED_EDGE('',*,*,#124803,.T.); +#124803 = EDGE_CURVE('',#124796,#124804,#124806,.T.); +#124804 = VERTEX_POINT('',#124805); +#124805 = CARTESIAN_POINT('',(95.86221,-135.408364,1.585)); +#124806 = LINE('',#124807,#124808); +#124807 = CARTESIAN_POINT('',(95.880892,-135.389689,1.585)); +#124808 = VECTOR('',#124809,1.); +#124809 = DIRECTION('',(-0.707239267297,-0.706974270248,0.)); +#124810 = ORIENTED_EDGE('',*,*,#124811,.T.); +#124811 = EDGE_CURVE('',#124804,#124812,#124814,.T.); +#124812 = VERTEX_POINT('',#124813); +#124813 = CARTESIAN_POINT('',(95.843545,-135.707206,1.585)); +#124814 = LINE('',#124815,#124816); +#124815 = CARTESIAN_POINT('',(95.86221,-135.408364,1.585)); +#124816 = VECTOR('',#124817,1.); +#124817 = DIRECTION('',(-6.233628591939E-02,-0.99805520261,0.)); +#124818 = ORIENTED_EDGE('',*,*,#124819,.T.); +#124819 = EDGE_CURVE('',#124812,#124820,#124822,.T.); +#124820 = VERTEX_POINT('',#124821); +#124821 = CARTESIAN_POINT('',(95.712799,-136.192802,1.585)); +#124822 = LINE('',#124823,#124824); +#124823 = CARTESIAN_POINT('',(95.843545,-135.707206,1.585)); +#124824 = VECTOR('',#124825,1.); +#124825 = DIRECTION('',(-0.259989447302,-0.965611457726,0.)); +#124826 = ORIENTED_EDGE('',*,*,#124827,.T.); +#124827 = EDGE_CURVE('',#124820,#124828,#124830,.T.); +#124828 = VERTEX_POINT('',#124829); +#124829 = CARTESIAN_POINT('',(95.582056,-136.491642,1.585)); +#124830 = LINE('',#124831,#124832); +#124831 = CARTESIAN_POINT('',(95.712799,-136.192802,1.585)); +#124832 = VECTOR('',#124833,1.); +#124833 = DIRECTION('',(-0.400820120612,-0.916156772017,0.)); +#124834 = ORIENTED_EDGE('',*,*,#124835,.T.); +#124835 = EDGE_CURVE('',#124828,#124836,#124838,.T.); +#124836 = VERTEX_POINT('',#124837); +#124837 = CARTESIAN_POINT('',(95.451309,-136.715768,1.585)); +#124838 = LINE('',#124839,#124840); +#124839 = CARTESIAN_POINT('',(95.582056,-136.491642,1.585)); +#124840 = VECTOR('',#124841,1.); +#124841 = DIRECTION('',(-0.503890674481,-0.863767438707,0.)); +#124842 = ORIENTED_EDGE('',*,*,#124843,.T.); +#124843 = EDGE_CURVE('',#124836,#124844,#124846,.T.); +#124844 = VERTEX_POINT('',#124845); +#124845 = CARTESIAN_POINT('',(95.152481,-137.145344,1.585)); +#124846 = LINE('',#124847,#124848); +#124847 = CARTESIAN_POINT('',(95.451309,-136.715768,1.585)); +#124848 = VECTOR('',#124849,1.); +#124849 = DIRECTION('',(-0.571054857785,-0.82091190112,0.)); +#124850 = ORIENTED_EDGE('',*,*,#124851,.T.); +#124851 = EDGE_CURVE('',#124844,#124852,#124854,.T.); +#124852 = VERTEX_POINT('',#124853); +#124853 = CARTESIAN_POINT('',(94.928354,-137.369469,1.585)); +#124854 = LINE('',#124855,#124856); +#124855 = CARTESIAN_POINT('',(95.152481,-137.145344,1.585)); +#124856 = VECTOR('',#124857,1.); +#124857 = DIRECTION('',(-0.707109936132,-0.707103626227,0.)); +#124858 = ORIENTED_EDGE('',*,*,#124859,.T.); +#124859 = EDGE_CURVE('',#124852,#124860,#124862,.T.); +#124860 = VERTEX_POINT('',#124861); +#124861 = CARTESIAN_POINT('',(94.648195,-137.593596,1.585)); +#124862 = LINE('',#124863,#124864); +#124863 = CARTESIAN_POINT('',(94.928354,-137.369469,1.585)); +#124864 = VECTOR('',#124865,1.); +#124865 = DIRECTION('',(-0.780869081368,-0.624694707648,0.)); +#124866 = ORIENTED_EDGE('',*,*,#124867,.T.); +#124867 = EDGE_CURVE('',#124860,#124868,#124870,.T.); +#124868 = VERTEX_POINT('',#124869); +#124869 = CARTESIAN_POINT('',(94.349367,-137.799046,1.585)); +#124870 = LINE('',#124871,#124872); +#124871 = CARTESIAN_POINT('',(94.648195,-137.593596,1.585)); +#124872 = VECTOR('',#124873,1.); +#124873 = DIRECTION('',(-0.824034521887,-0.566539589736,0.)); +#124874 = ORIENTED_EDGE('',*,*,#124875,.T.); +#124875 = EDGE_CURVE('',#124868,#124876,#124878,.T.); +#124876 = VERTEX_POINT('',#124877); +#124877 = CARTESIAN_POINT('',(94.031852,-137.967139,1.585)); +#124878 = LINE('',#124879,#124880); +#124879 = CARTESIAN_POINT('',(94.349367,-137.799046,1.585)); +#124880 = VECTOR('',#124881,1.); +#124881 = DIRECTION('',(-0.883791572438,-0.467880814405,0.)); +#124882 = ORIENTED_EDGE('',*,*,#124883,.T.); +#124883 = EDGE_CURVE('',#124876,#124884,#124886,.T.); +#124884 = VERTEX_POINT('',#124885); +#124885 = CARTESIAN_POINT('',(93.602281,-138.116548,1.585)); +#124886 = LINE('',#124887,#124888); +#124887 = CARTESIAN_POINT('',(94.031852,-137.967139,1.585)); +#124888 = VECTOR('',#124889,1.); +#124889 = DIRECTION('',(-0.944501572217,-0.328506895026,0.)); +#124890 = ORIENTED_EDGE('',*,*,#124891,.T.); +#124891 = EDGE_CURVE('',#124884,#124892,#124894,.T.); +#124892 = VERTEX_POINT('',#124893); +#124893 = CARTESIAN_POINT('',(93.508893,-138.116548,1.585)); +#124894 = LINE('',#124895,#124896); +#124895 = CARTESIAN_POINT('',(93.602281,-138.116548,1.585)); +#124896 = VECTOR('',#124897,1.); +#124897 = DIRECTION('',(-1.,0.,0.)); +#124898 = ORIENTED_EDGE('',*,*,#124899,.T.); +#124899 = EDGE_CURVE('',#124892,#124900,#124902,.T.); +#124900 = VERTEX_POINT('',#124901); +#124901 = CARTESIAN_POINT('',(93.303449,-138.172583,1.585)); +#124902 = LINE('',#124903,#124904); +#124903 = CARTESIAN_POINT('',(93.508893,-138.116548,1.585)); +#124904 = VECTOR('',#124905,1.); +#124905 = DIRECTION('',(-0.96475807748,-0.263138465332,0.)); +#124906 = ORIENTED_EDGE('',*,*,#124907,.T.); +#124907 = EDGE_CURVE('',#124900,#124908,#124910,.T.); +#124908 = VERTEX_POINT('',#124909); +#124909 = CARTESIAN_POINT('',(93.172703,-138.172583,1.585)); +#124910 = LINE('',#124911,#124912); +#124911 = CARTESIAN_POINT('',(93.303449,-138.172583,1.585)); +#124912 = VECTOR('',#124913,1.); +#124913 = DIRECTION('',(-1.,0.,0.)); +#124914 = ORIENTED_EDGE('',*,*,#124915,.T.); +#124915 = EDGE_CURVE('',#124908,#124916,#124918,.T.); +#124916 = VERTEX_POINT('',#124917); +#124917 = CARTESIAN_POINT('',(93.154023,-138.191255,1.585)); +#124918 = LINE('',#124919,#124920); +#124919 = CARTESIAN_POINT('',(93.172703,-138.172583,1.585)); +#124920 = VECTOR('',#124921,1.); +#124921 = DIRECTION('',(-0.707258212123,-0.706955317814,0.)); +#124922 = ORIENTED_EDGE('',*,*,#124923,.T.); +#124923 = EDGE_CURVE('',#124916,#124924,#124926,.T.); +#124924 = VERTEX_POINT('',#124925); +#124925 = CARTESIAN_POINT('',(92.425619,-138.172583,1.585)); +#124926 = LINE('',#124927,#124928); +#124927 = CARTESIAN_POINT('',(93.154023,-138.191255,1.585)); +#124928 = VECTOR('',#124929,1.); +#124929 = DIRECTION('',(-0.999671607622,2.562570806521E-02,0.)); +#124930 = ORIENTED_EDGE('',*,*,#124931,.T.); +#124931 = EDGE_CURVE('',#124924,#124932,#124934,.T.); +#124932 = VERTEX_POINT('',#124933); +#124933 = CARTESIAN_POINT('',(92.126785,-138.116548,1.585)); +#124934 = LINE('',#124935,#124936); +#124935 = CARTESIAN_POINT('',(92.425619,-138.172583,1.585)); +#124936 = VECTOR('',#124937,1.); +#124937 = DIRECTION('',(-0.982870027286,0.184300052802,0.)); +#124938 = ORIENTED_EDGE('',*,*,#124939,.T.); +#124939 = EDGE_CURVE('',#124932,#124940,#124942,.T.); +#124940 = VERTEX_POINT('',#124941); +#124941 = CARTESIAN_POINT('',(91.827944,-138.023164,1.585)); +#124942 = LINE('',#124943,#124944); +#124943 = CARTESIAN_POINT('',(92.126785,-138.116548,1.585)); +#124944 = VECTOR('',#124945,1.); +#124945 = DIRECTION('',(-0.954483444714,0.298263899536,0.)); +#124946 = ORIENTED_EDGE('',*,*,#124947,.T.); +#124947 = EDGE_CURVE('',#124940,#124948,#124950,.T.); +#124948 = VERTEX_POINT('',#124949); +#124949 = CARTESIAN_POINT('',(91.3797,-137.817723,1.585)); +#124950 = LINE('',#124951,#124952); +#124951 = CARTESIAN_POINT('',(91.827944,-138.023164,1.585)); +#124952 = VECTOR('',#124953,1.); +#124953 = DIRECTION('',(-0.909068023544,0.416647727186,0.)); +#124954 = ORIENTED_EDGE('',*,*,#124955,.T.); +#124955 = EDGE_CURVE('',#124948,#124956,#124958,.T.); +#124956 = VERTEX_POINT('',#124957); +#124957 = CARTESIAN_POINT('',(91.155569,-137.649622,1.585)); +#124958 = LINE('',#124959,#124960); +#124959 = CARTESIAN_POINT('',(91.3797,-137.817723,1.585)); +#124960 = VECTOR('',#124961,1.); +#124961 = DIRECTION('',(-0.799995288473,0.600006281985,0.)); +#124962 = ORIENTED_EDGE('',*,*,#124963,.T.); +#124963 = EDGE_CURVE('',#124956,#124964,#124966,.T.); +#124964 = VERTEX_POINT('',#124965); +#124965 = CARTESIAN_POINT('',(91.099545,-137.630951,1.585)); +#124966 = LINE('',#124967,#124968); +#124967 = CARTESIAN_POINT('',(91.155569,-137.649622,1.585)); +#124968 = VECTOR('',#124969,1.); +#124969 = DIRECTION('',(-0.948701923638,0.316171883768,0.)); +#124970 = ORIENTED_EDGE('',*,*,#124971,.T.); +#124971 = EDGE_CURVE('',#124964,#124972,#124974,.T.); +#124972 = VERTEX_POINT('',#124973); +#124973 = CARTESIAN_POINT('',(90.931446,-137.481529,1.585)); +#124974 = LINE('',#124975,#124976); +#124975 = CARTESIAN_POINT('',(91.099545,-137.630951,1.585)); +#124976 = VECTOR('',#124977,1.); +#124977 = DIRECTION('',(-0.747407846824,0.664365494668,0.)); +#124978 = ORIENTED_EDGE('',*,*,#124979,.T.); +#124979 = EDGE_CURVE('',#124972,#124980,#124982,.T.); +#124980 = VERTEX_POINT('',#124981); +#124981 = CARTESIAN_POINT('',(90.894094,-137.481529,1.585)); +#124982 = LINE('',#124983,#124984); +#124983 = CARTESIAN_POINT('',(90.931446,-137.481529,1.585)); +#124984 = VECTOR('',#124985,1.); +#124985 = DIRECTION('',(-1.,0.,0.)); +#124986 = ORIENTED_EDGE('',*,*,#124987,.T.); +#124987 = EDGE_CURVE('',#124980,#124988,#124990,.T.); +#124988 = VERTEX_POINT('',#124989); +#124989 = CARTESIAN_POINT('',(90.46452,-137.033288,1.585)); +#124990 = LINE('',#124991,#124992); +#124991 = CARTESIAN_POINT('',(90.894094,-137.481529,1.585)); +#124992 = VECTOR('',#124993,1.); +#124993 = DIRECTION('',(-0.691913514338,0.721980393554,0.)); +#124994 = ORIENTED_EDGE('',*,*,#124995,.T.); +#124995 = EDGE_CURVE('',#124988,#124996,#124998,.T.); +#124996 = VERTEX_POINT('',#124997); +#124997 = CARTESIAN_POINT('',(90.203039,-136.603707,1.585)); +#124998 = LINE('',#124999,#125000); +#124999 = CARTESIAN_POINT('',(90.46452,-137.033288,1.585)); +#125000 = VECTOR('',#125001,1.); +#125001 = DIRECTION('',(-0.519942468071,0.854201281839,0.)); +#125002 = ORIENTED_EDGE('',*,*,#125003,.T.); +#125003 = EDGE_CURVE('',#124996,#125004,#125006,.T.); +#125004 = VERTEX_POINT('',#125005); +#125005 = CARTESIAN_POINT('',(90.165685,-136.585022,1.585)); +#125006 = LINE('',#125007,#125008); +#125007 = CARTESIAN_POINT('',(90.203039,-136.603707,1.585)); +#125008 = VECTOR('',#125009,1.); +#125009 = DIRECTION('',(-0.894350561667,0.447366821351,0.)); +#125010 = ORIENTED_EDGE('',*,*,#125011,.T.); +#125011 = EDGE_CURVE('',#125004,#125012,#125014,.T.); +#125012 = VERTEX_POINT('',#125013); +#125013 = CARTESIAN_POINT('',(90.016264,-136.230161,1.585)); +#125014 = LINE('',#125015,#125016); +#125015 = CARTESIAN_POINT('',(90.165685,-136.585022,1.585)); +#125016 = VECTOR('',#125017,1.); +#125017 = DIRECTION('',(-0.388069888033,0.921629948516,0.)); +#125018 = ORIENTED_EDGE('',*,*,#125019,.T.); +#125019 = EDGE_CURVE('',#125012,#125020,#125022,.T.); +#125020 = VERTEX_POINT('',#125021); +#125021 = CARTESIAN_POINT('',(90.016264,-136.174131,1.585)); +#125022 = LINE('',#125023,#125024); +#125023 = CARTESIAN_POINT('',(90.016264,-136.230161,1.585)); +#125024 = VECTOR('',#125025,1.); +#125025 = DIRECTION('',(0.,1.,0.)); +#125026 = ORIENTED_EDGE('',*,*,#125027,.T.); +#125027 = EDGE_CURVE('',#125020,#125028,#125030,.T.); +#125028 = VERTEX_POINT('',#125029); +#125029 = CARTESIAN_POINT('',(89.978907,-136.118096,1.585)); +#125030 = LINE('',#125031,#125032); +#125031 = CARTESIAN_POINT('',(90.016264,-136.174131,1.585)); +#125032 = VECTOR('',#125033,1.); +#125033 = DIRECTION('',(-0.554703622848,0.832048009912,0.)); +#125034 = ORIENTED_EDGE('',*,*,#125035,.T.); +#125035 = EDGE_CURVE('',#125028,#125036,#125038,.T.); +#125036 = VERTEX_POINT('',#125037); +#125037 = CARTESIAN_POINT('',(89.904202,-135.837945,1.585)); +#125038 = LINE('',#125039,#125040); +#125039 = CARTESIAN_POINT('',(89.978907,-136.118096,1.585)); +#125040 = VECTOR('',#125041,1.); +#125041 = DIRECTION('',(-0.257656425209,0.966236599674,0.)); +#125042 = ORIENTED_EDGE('',*,*,#125043,.T.); +#125043 = EDGE_CURVE('',#125036,#125044,#125046,.T.); +#125044 = VERTEX_POINT('',#125045); +#125045 = CARTESIAN_POINT('',(89.866846,-135.464395,1.585)); +#125046 = LINE('',#125047,#125048); +#125047 = CARTESIAN_POINT('',(89.904202,-135.837945,1.585)); +#125048 = VECTOR('',#125049,1.); +#125049 = DIRECTION('',(-9.950635637864E-02,0.995036926471,0.)); +#125050 = ORIENTED_EDGE('',*,*,#125051,.T.); +#125051 = EDGE_CURVE('',#125044,#125052,#125054,.T.); +#125052 = VERTEX_POINT('',#125053); +#125053 = CARTESIAN_POINT('',(89.848173,-135.445712,1.585)); +#125054 = LINE('',#125055,#125056); +#125055 = CARTESIAN_POINT('',(89.866846,-135.464395,1.585)); +#125056 = VECTOR('',#125057,1.); +#125057 = DIRECTION('',(-0.70691746718,0.707296044521,0.)); +#125058 = ORIENTED_EDGE('',*,*,#125059,.T.); +#125059 = EDGE_CURVE('',#125052,#125060,#125062,.T.); +#125060 = VERTEX_POINT('',#125061); +#125061 = CARTESIAN_POINT('',(89.866846,-134.754664,1.585)); +#125062 = LINE('',#125063,#125064); +#125063 = CARTESIAN_POINT('',(89.848173,-135.445712,1.585)); +#125064 = VECTOR('',#125065,1.); +#125065 = DIRECTION('',(2.701141844044E-02,0.99963512507,0.)); +#125066 = ORIENTED_EDGE('',*,*,#125067,.T.); +#125067 = EDGE_CURVE('',#125060,#125068,#125070,.T.); +#125068 = VERTEX_POINT('',#125069); +#125069 = CARTESIAN_POINT('',(89.960229,-134.30642,1.585)); +#125070 = LINE('',#125071,#125072); +#125071 = CARTESIAN_POINT('',(89.866846,-134.754664,1.585)); +#125072 = VECTOR('',#125073,1.); +#125073 = DIRECTION('',(0.203951812061,0.978980928495,0.)); +#125074 = ORIENTED_EDGE('',*,*,#125075,.T.); +#125075 = EDGE_CURVE('',#125068,#125076,#125078,.T.); +#125076 = VERTEX_POINT('',#125077); +#125077 = CARTESIAN_POINT('',(90.034938,-134.082295,1.585)); +#125078 = LINE('',#125079,#125080); +#125079 = CARTESIAN_POINT('',(89.960229,-134.30642,1.585)); +#125080 = VECTOR('',#125081,1.); +#125081 = DIRECTION('',(0.316230305712,0.948682451482,0.)); +#125082 = ORIENTED_EDGE('',*,*,#125083,.T.); +#125083 = EDGE_CURVE('',#125076,#125084,#125086,.T.); +#125084 = VERTEX_POINT('',#125085); +#125085 = CARTESIAN_POINT('',(90.090976,-133.988905,1.585)); +#125086 = LINE('',#125087,#125088); +#125087 = CARTESIAN_POINT('',(90.034938,-134.082295,1.585)); +#125088 = VECTOR('',#125089,1.); +#125089 = DIRECTION('',(0.514522760102,0.85747672233,0.)); +#125090 = ORIENTED_EDGE('',*,*,#125091,.T.); +#125091 = EDGE_CURVE('',#125084,#125092,#125094,.T.); +#125092 = VERTEX_POINT('',#125093); +#125093 = CARTESIAN_POINT('',(90.090976,-133.932872,1.585)); +#125094 = LINE('',#125095,#125096); +#125095 = CARTESIAN_POINT('',(90.090976,-133.988905,1.585)); +#125096 = VECTOR('',#125097,1.); +#125097 = DIRECTION('',(0.,1.,0.)); +#125098 = ORIENTED_EDGE('',*,*,#125099,.T.); +#125099 = EDGE_CURVE('',#125092,#125100,#125102,.T.); +#125100 = VERTEX_POINT('',#125101); +#125101 = CARTESIAN_POINT('',(90.184359,-133.746102,1.585)); +#125102 = LINE('',#125103,#125104); +#125103 = CARTESIAN_POINT('',(90.090976,-133.932872,1.585)); +#125104 = VECTOR('',#125105,1.); +#125105 = DIRECTION('',(0.447205933174,0.894431022122,0.)); +#125106 = ORIENTED_EDGE('',*,*,#125107,.T.); +#125107 = EDGE_CURVE('',#125100,#125108,#125110,.T.); +#125108 = VERTEX_POINT('',#125109); +#125109 = CARTESIAN_POINT('',(90.259066,-133.671394,1.585)); +#125110 = LINE('',#125111,#125112); +#125111 = CARTESIAN_POINT('',(90.184359,-133.746102,1.585)); +#125112 = VECTOR('',#125113,1.); +#125113 = DIRECTION('',(0.707102048669,0.707111513673,0.)); +#125114 = ORIENTED_EDGE('',*,*,#125115,.T.); +#125115 = EDGE_CURVE('',#125108,#125116,#125118,.T.); +#125116 = VERTEX_POINT('',#125117); +#125117 = CARTESIAN_POINT('',(90.352459,-133.521974,1.585)); +#125118 = LINE('',#125119,#125120); +#125119 = CARTESIAN_POINT('',(90.259066,-133.671394,1.585)); +#125120 = VECTOR('',#125121,1.); +#125121 = DIRECTION('',(0.530021385444,0.847984275192,0.)); +#125122 = ORIENTED_EDGE('',*,*,#125123,.T.); +#125123 = EDGE_CURVE('',#125116,#125124,#125126,.T.); +#125124 = VERTEX_POINT('',#125125); +#125125 = CARTESIAN_POINT('',(90.352459,-133.484619,1.585)); +#125126 = LINE('',#125127,#125128); +#125127 = CARTESIAN_POINT('',(90.352459,-133.521974,1.585)); +#125128 = VECTOR('',#125129,1.); +#125129 = DIRECTION('',(0.,1.,0.)); +#125130 = ORIENTED_EDGE('',*,*,#125131,.T.); +#125131 = EDGE_CURVE('',#125124,#125132,#125134,.T.); +#125132 = VERTEX_POINT('',#125133); +#125133 = CARTESIAN_POINT('',(90.501873,-133.279171,1.585)); +#125134 = LINE('',#125135,#125136); +#125135 = CARTESIAN_POINT('',(90.352459,-133.484619,1.585)); +#125136 = VECTOR('',#125137,1.); +#125137 = DIRECTION('',(0.58816467583,0.808741191053,0.)); +#125138 = ORIENTED_EDGE('',*,*,#125139,.T.); +#125139 = EDGE_CURVE('',#125132,#125140,#125142,.T.); +#125140 = VERTEX_POINT('',#125141); +#125141 = CARTESIAN_POINT('',(90.894094,-132.886954,1.585)); +#125142 = LINE('',#125143,#125144); +#125143 = CARTESIAN_POINT('',(90.501873,-133.279171,1.585)); +#125144 = VECTOR('',#125145,1.); +#125145 = DIRECTION('',(0.707110386851,0.707103175504,0.)); +#125146 = ORIENTED_EDGE('',*,*,#125147,.T.); +#125147 = EDGE_CURVE('',#125140,#125148,#125150,.T.); +#125148 = VERTEX_POINT('',#125149); +#125149 = CARTESIAN_POINT('',(90.950119,-132.868274,1.585)); +#125150 = LINE('',#125151,#125152); +#125151 = CARTESIAN_POINT('',(90.894094,-132.886954,1.585)); +#125152 = VECTOR('',#125153,1.); +#125153 = DIRECTION('',(0.94865789585,0.316303962418,0.)); +#125154 = ORIENTED_EDGE('',*,*,#125155,.T.); +#125155 = EDGE_CURVE('',#125148,#125156,#125158,.T.); +#125156 = VERTEX_POINT('',#125157); +#125157 = CARTESIAN_POINT('',(91.323667,-132.588113,1.585)); +#125158 = LINE('',#125159,#125160); +#125159 = CARTESIAN_POINT('',(90.950119,-132.868274,1.585)); +#125160 = VECTOR('',#125161,1.); +#125161 = DIRECTION('',(0.8,0.6,0.)); +#125162 = ORIENTED_EDGE('',*,*,#125163,.T.); +#125163 = EDGE_CURVE('',#125156,#125164,#125166,.T.); +#125164 = VERTEX_POINT('',#125165); +#125165 = CARTESIAN_POINT('',(91.566467,-132.457378,1.585)); +#125166 = LINE('',#125167,#125168); +#125167 = CARTESIAN_POINT('',(91.323667,-132.588113,1.585)); +#125168 = VECTOR('',#125169,1.); +#125169 = DIRECTION('',(0.880476339769,0.474090091762,0.)); +#125170 = ORIENTED_EDGE('',*,*,#125171,.T.); +#125171 = EDGE_CURVE('',#125164,#125172,#125174,.T.); +#125172 = VERTEX_POINT('',#125173); +#125173 = CARTESIAN_POINT('',(91.902653,-132.326634,1.585)); +#125174 = LINE('',#125175,#125176); +#125175 = CARTESIAN_POINT('',(91.566467,-132.457378,1.585)); +#125176 = VECTOR('',#125177,1.); +#125177 = DIRECTION('',(0.931999989069,0.362458301568,0.)); +#125178 = ORIENTED_EDGE('',*,*,#125179,.T.); +#125179 = EDGE_CURVE('',#125172,#125180,#125182,.T.); +#125180 = VERTEX_POINT('',#125181); +#125181 = CARTESIAN_POINT('',(92.033399,-132.307961,1.585)); +#125182 = LINE('',#125183,#125184); +#125183 = CARTESIAN_POINT('',(91.902653,-132.326634,1.585)); +#125184 = VECTOR('',#125185,1.); +#125185 = DIRECTION('',(0.989954793077,0.141384255359,0.)); +#125186 = ORIENTED_EDGE('',*,*,#125187,.T.); +#125187 = EDGE_CURVE('',#125180,#125188,#125190,.T.); +#125188 = VERTEX_POINT('',#125189); +#125189 = CARTESIAN_POINT('',(92.182816,-132.25193,1.585)); +#125190 = LINE('',#125191,#125192); +#125191 = CARTESIAN_POINT('',(92.033399,-132.307961,1.585)); +#125192 = VECTOR('',#125193,1.); +#125193 = DIRECTION('',(0.936329950156,0.35112138135,0.)); +#125194 = ORIENTED_EDGE('',*,*,#125195,.T.); +#125195 = EDGE_CURVE('',#125188,#124642,#125196,.T.); +#125196 = LINE('',#125197,#125198); +#125197 = CARTESIAN_POINT('',(92.182816,-132.25193,1.585)); +#125198 = VECTOR('',#125199,1.); +#125199 = DIRECTION('',(0.99624153669,8.66187079899E-02,0.)); +#125200 = FACE_BOUND('',#125201,.F.); +#125201 = EDGE_LOOP('',(#125202,#125212,#125220,#125228,#125236,#125244, + #125252,#125260,#125268,#125276,#125284,#125292,#125300,#125308, + #125316,#125324,#125332,#125340,#125348,#125356,#125364,#125372, + #125380,#125388,#125396,#125404,#125412,#125420,#125428,#125436, + #125444,#125452,#125460,#125468,#125476,#125484,#125492,#125500, + #125508,#125516,#125524,#125532,#125540,#125548,#125556,#125564, + #125572,#125580,#125588,#125596,#125604,#125612,#125620,#125628, + #125636,#125644,#125652,#125660,#125668)); +#125202 = ORIENTED_EDGE('',*,*,#125203,.T.); +#125203 = EDGE_CURVE('',#125204,#125206,#125208,.T.); +#125204 = VERTEX_POINT('',#125205); +#125205 = CARTESIAN_POINT('',(93.097996,-132.60679,1.585)); +#125206 = VERTEX_POINT('',#125207); +#125207 = CARTESIAN_POINT('',(93.079318,-132.588113,1.585)); +#125208 = LINE('',#125209,#125210); +#125209 = CARTESIAN_POINT('',(93.097996,-132.60679,1.585)); +#125210 = VECTOR('',#125211,1.); +#125211 = DIRECTION('',(-0.707125710308,0.707087851559,0.)); +#125212 = ORIENTED_EDGE('',*,*,#125213,.T.); +#125213 = EDGE_CURVE('',#125206,#125214,#125216,.T.); +#125214 = VERTEX_POINT('',#125215); +#125215 = CARTESIAN_POINT('',(92.612384,-132.588113,1.585)); +#125216 = LINE('',#125217,#125218); +#125217 = CARTESIAN_POINT('',(93.079318,-132.588113,1.585)); +#125218 = VECTOR('',#125219,1.); +#125219 = DIRECTION('',(-1.,0.,0.)); +#125220 = ORIENTED_EDGE('',*,*,#125221,.T.); +#125221 = EDGE_CURVE('',#125214,#125222,#125224,.T.); +#125222 = VERTEX_POINT('',#125223); +#125223 = CARTESIAN_POINT('',(92.593719,-132.60679,1.585)); +#125224 = LINE('',#125225,#125226); +#125225 = CARTESIAN_POINT('',(92.612384,-132.588113,1.585)); +#125226 = VECTOR('',#125227,1.); +#125227 = DIRECTION('',(-0.706879513115,-0.707333976236,0.)); +#125228 = ORIENTED_EDGE('',*,*,#125229,.T.); +#125229 = EDGE_CURVE('',#125222,#125230,#125232,.T.); +#125230 = VERTEX_POINT('',#125231); +#125231 = CARTESIAN_POINT('',(92.294879,-132.625472,1.585)); +#125232 = LINE('',#125233,#125234); +#125233 = CARTESIAN_POINT('',(92.593719,-132.60679,1.585)); +#125234 = VECTOR('',#125235,1.); +#125235 = DIRECTION('',(-0.99805164272,-6.239325655638E-02,0.)); +#125236 = ORIENTED_EDGE('',*,*,#125237,.T.); +#125237 = EDGE_CURVE('',#125230,#125238,#125240,.T.); +#125238 = VERTEX_POINT('',#125239); +#125239 = CARTESIAN_POINT('',(92.014717,-132.718852,1.585)); +#125240 = LINE('',#125241,#125242); +#125241 = CARTESIAN_POINT('',(92.294879,-132.625472,1.585)); +#125242 = VECTOR('',#125243,1.); +#125243 = DIRECTION('',(-0.948690747476,-0.316205416863,0.)); +#125244 = ORIENTED_EDGE('',*,*,#125245,.T.); +#125245 = EDGE_CURVE('',#125238,#125246,#125248,.T.); +#125246 = VERTEX_POINT('',#125247); +#125247 = CARTESIAN_POINT('',(91.958697,-132.718852,1.585)); +#125248 = LINE('',#125249,#125250); +#125249 = CARTESIAN_POINT('',(92.014717,-132.718852,1.585)); +#125250 = VECTOR('',#125251,1.); +#125251 = DIRECTION('',(-1.,0.,0.)); +#125252 = ORIENTED_EDGE('',*,*,#125253,.T.); +#125253 = EDGE_CURVE('',#125246,#125254,#125256,.T.); +#125254 = VERTEX_POINT('',#125255); +#125255 = CARTESIAN_POINT('',(91.547794,-132.905632,1.585)); +#125256 = LINE('',#125257,#125258); +#125257 = CARTESIAN_POINT('',(91.958697,-132.718852,1.585)); +#125258 = VECTOR('',#125259,1.); +#125259 = DIRECTION('',(-0.910361545602,-0.413813794223,0.)); +#125260 = ORIENTED_EDGE('',*,*,#125261,.T.); +#125261 = EDGE_CURVE('',#125254,#125262,#125264,.T.); +#125262 = VERTEX_POINT('',#125263); +#125263 = CARTESIAN_POINT('',(91.510437,-132.942983,1.585)); +#125264 = LINE('',#125265,#125266); +#125265 = CARTESIAN_POINT('',(91.547794,-132.905632,1.585)); +#125266 = VECTOR('',#125267,1.); +#125267 = DIRECTION('',(-0.707163568549,-0.707049989263,0.)); +#125268 = ORIENTED_EDGE('',*,*,#125269,.T.); +#125269 = EDGE_CURVE('',#125262,#125270,#125272,.T.); +#125270 = VERTEX_POINT('',#125271); +#125271 = CARTESIAN_POINT('',(91.473085,-132.942983,1.585)); +#125272 = LINE('',#125273,#125274); +#125273 = CARTESIAN_POINT('',(91.510437,-132.942983,1.585)); +#125274 = VECTOR('',#125275,1.); +#125275 = DIRECTION('',(-1.,0.,0.)); +#125276 = ORIENTED_EDGE('',*,*,#125277,.T.); +#125277 = EDGE_CURVE('',#125270,#125278,#125280,.T.); +#125278 = VERTEX_POINT('',#125279); +#125279 = CARTESIAN_POINT('',(91.155569,-133.167111,1.585)); +#125280 = LINE('',#125281,#125282); +#125281 = CARTESIAN_POINT('',(91.473085,-132.942983,1.585)); +#125282 = VECTOR('',#125283,1.); +#125283 = DIRECTION('',(-0.816969004178,-0.576681581301,0.)); +#125284 = ORIENTED_EDGE('',*,*,#125285,.T.); +#125285 = EDGE_CURVE('',#125278,#125286,#125288,.T.); +#125286 = VERTEX_POINT('',#125287); +#125287 = CARTESIAN_POINT('',(90.763354,-133.559325,1.585)); +#125288 = LINE('',#125289,#125290); +#125289 = CARTESIAN_POINT('',(91.155569,-133.167111,1.585)); +#125290 = VECTOR('',#125291,1.); +#125291 = DIRECTION('',(-0.707107682615,-0.707105879757,0.)); +#125292 = ORIENTED_EDGE('',*,*,#125293,.T.); +#125293 = EDGE_CURVE('',#125286,#125294,#125296,.T.); +#125294 = VERTEX_POINT('',#125295); +#125295 = CARTESIAN_POINT('',(90.557902,-133.85816,1.585)); +#125296 = LINE('',#125297,#125298); +#125297 = CARTESIAN_POINT('',(90.763354,-133.559325,1.585)); +#125298 = VECTOR('',#125299,1.); +#125299 = DIRECTION('',(-0.56653432325,-0.824038142673,0.)); +#125300 = ORIENTED_EDGE('',*,*,#125301,.T.); +#125301 = EDGE_CURVE('',#125294,#125302,#125304,.T.); +#125302 = VERTEX_POINT('',#125303); +#125303 = CARTESIAN_POINT('',(90.333771,-134.381125,1.585)); +#125304 = LINE('',#125305,#125306); +#125305 = CARTESIAN_POINT('',(90.557902,-133.85816,1.585)); +#125306 = VECTOR('',#125307,1.); +#125307 = DIRECTION('',(-0.393923965202,-0.919143030023,0.)); +#125308 = ORIENTED_EDGE('',*,*,#125309,.T.); +#125309 = EDGE_CURVE('',#125302,#125310,#125312,.T.); +#125310 = VERTEX_POINT('',#125311); +#125311 = CARTESIAN_POINT('',(90.240387,-134.848052,1.585)); +#125312 = LINE('',#125313,#125314); +#125313 = CARTESIAN_POINT('',(90.333771,-134.381125,1.585)); +#125314 = VECTOR('',#125315,1.); +#125315 = DIRECTION('',(-0.196113308115,-0.980581241091,0.)); +#125316 = ORIENTED_EDGE('',*,*,#125317,.T.); +#125317 = EDGE_CURVE('',#125310,#125318,#125320,.T.); +#125318 = VERTEX_POINT('',#125319); +#125319 = CARTESIAN_POINT('',(90.221713,-135.221594,1.585)); +#125320 = LINE('',#125321,#125322); +#125321 = CARTESIAN_POINT('',(90.240387,-134.848052,1.585)); +#125322 = VECTOR('',#125323,1.); +#125323 = DIRECTION('',(-4.992934902988E-02,-0.998752752239,0.)); +#125324 = ORIENTED_EDGE('',*,*,#125325,.T.); +#125325 = EDGE_CURVE('',#125318,#125326,#125328,.T.); +#125326 = VERTEX_POINT('',#125327); +#125327 = CARTESIAN_POINT('',(90.240387,-135.240275,1.585)); +#125328 = LINE('',#125329,#125330); +#125329 = CARTESIAN_POINT('',(90.221713,-135.221594,1.585)); +#125330 = VECTOR('',#125331,1.); +#125331 = DIRECTION('',(0.706974263153,-0.70723927439,0.)); +#125332 = ORIENTED_EDGE('',*,*,#125333,.T.); +#125333 = EDGE_CURVE('',#125326,#125334,#125336,.T.); +#125334 = VERTEX_POINT('',#125335); +#125335 = CARTESIAN_POINT('',(90.240387,-135.483078,1.585)); +#125336 = LINE('',#125337,#125338); +#125337 = CARTESIAN_POINT('',(90.240387,-135.240275,1.585)); +#125338 = VECTOR('',#125339,1.); +#125339 = DIRECTION('',(0.,-1.,0.)); +#125340 = ORIENTED_EDGE('',*,*,#125341,.T.); +#125341 = EDGE_CURVE('',#125334,#125342,#125344,.T.); +#125342 = VERTEX_POINT('',#125343); +#125343 = CARTESIAN_POINT('',(90.259066,-135.501753,1.585)); +#125344 = LINE('',#125345,#125346); +#125345 = CARTESIAN_POINT('',(90.240387,-135.483078,1.585)); +#125346 = VECTOR('',#125347,1.); +#125347 = DIRECTION('',(0.707182496657,-0.707031057608,0.)); +#125348 = ORIENTED_EDGE('',*,*,#125349,.T.); +#125349 = EDGE_CURVE('',#125342,#125350,#125352,.T.); +#125350 = VERTEX_POINT('',#125351); +#125351 = CARTESIAN_POINT('',(90.259066,-135.613822,1.585)); +#125352 = LINE('',#125353,#125354); +#125353 = CARTESIAN_POINT('',(90.259066,-135.501753,1.585)); +#125354 = VECTOR('',#125355,1.); +#125355 = DIRECTION('',(0.,-1.,0.)); +#125356 = ORIENTED_EDGE('',*,*,#125357,.T.); +#125357 = EDGE_CURVE('',#125350,#125358,#125360,.T.); +#125358 = VERTEX_POINT('',#125359); +#125359 = CARTESIAN_POINT('',(90.315108,-135.893978,1.585)); +#125360 = LINE('',#125361,#125362); +#125361 = CARTESIAN_POINT('',(90.259066,-135.613822,1.585)); +#125362 = VECTOR('',#125363,1.); +#125363 = DIRECTION('',(0.196152482173,-0.980573405583,0.)); +#125364 = ORIENTED_EDGE('',*,*,#125365,.T.); +#125365 = EDGE_CURVE('',#125358,#125366,#125368,.T.); +#125366 = VERTEX_POINT('',#125367); +#125367 = CARTESIAN_POINT('',(90.539227,-136.472964,1.585)); +#125368 = LINE('',#125369,#125370); +#125369 = CARTESIAN_POINT('',(90.315108,-135.893978,1.585)); +#125370 = VECTOR('',#125371,1.); +#125371 = DIRECTION('',(0.360987640815,-0.932570599568,0.)); +#125372 = ORIENTED_EDGE('',*,*,#125373,.T.); +#125373 = EDGE_CURVE('',#125366,#125374,#125376,.T.); +#125374 = VERTEX_POINT('',#125375); +#125375 = CARTESIAN_POINT('',(90.782029,-136.827839,1.585)); +#125376 = LINE('',#125377,#125378); +#125377 = CARTESIAN_POINT('',(90.539227,-136.472964,1.585)); +#125378 = VECTOR('',#125379,1.); +#125379 = DIRECTION('',(0.564672493524,-0.825315076233,0.)); +#125380 = ORIENTED_EDGE('',*,*,#125381,.T.); +#125381 = EDGE_CURVE('',#125374,#125382,#125384,.T.); +#125382 = VERTEX_POINT('',#125383); +#125383 = CARTESIAN_POINT('',(91.099545,-137.164009,1.585)); +#125384 = LINE('',#125385,#125386); +#125385 = CARTESIAN_POINT('',(90.782029,-136.827839,1.585)); +#125386 = VECTOR('',#125387,1.); +#125387 = DIRECTION('',(0.686648805977,-0.726989282762,0.)); +#125388 = ORIENTED_EDGE('',*,*,#125389,.T.); +#125389 = EDGE_CURVE('',#125382,#125390,#125392,.T.); +#125390 = VERTEX_POINT('',#125391); +#125391 = CARTESIAN_POINT('',(91.454403,-137.425499,1.585)); +#125392 = LINE('',#125393,#125394); +#125393 = CARTESIAN_POINT('',(91.099545,-137.164009,1.585)); +#125394 = VECTOR('',#125395,1.); +#125395 = DIRECTION('',(0.805038844755,-0.593222098741,0.)); +#125396 = ORIENTED_EDGE('',*,*,#125397,.T.); +#125397 = EDGE_CURVE('',#125390,#125398,#125400,.T.); +#125398 = VERTEX_POINT('',#125399); +#125399 = CARTESIAN_POINT('',(91.491761,-137.425499,1.585)); +#125400 = LINE('',#125401,#125402); +#125401 = CARTESIAN_POINT('',(91.454403,-137.425499,1.585)); +#125402 = VECTOR('',#125403,1.); +#125403 = DIRECTION('',(1.,0.,0.)); +#125404 = ORIENTED_EDGE('',*,*,#125405,.T.); +#125405 = EDGE_CURVE('',#125398,#125406,#125408,.T.); +#125406 = VERTEX_POINT('',#125407); +#125407 = CARTESIAN_POINT('',(91.659854,-137.537562,1.585)); +#125408 = LINE('',#125409,#125410); +#125409 = CARTESIAN_POINT('',(91.491761,-137.425499,1.585)); +#125410 = VECTOR('',#125411,1.); +#125411 = DIRECTION('',(0.832048009749,-0.554703623093,0.)); +#125412 = ORIENTED_EDGE('',*,*,#125413,.T.); +#125413 = EDGE_CURVE('',#125406,#125414,#125416,.T.); +#125414 = VERTEX_POINT('',#125415); +#125415 = CARTESIAN_POINT('',(91.958697,-137.668304,1.585)); +#125416 = LINE('',#125417,#125418); +#125417 = CARTESIAN_POINT('',(91.659854,-137.537562,1.585)); +#125418 = VECTOR('',#125419,1.); +#125419 = DIRECTION('',(0.916159375332,-0.400814170148,0.)); +#125420 = ORIENTED_EDGE('',*,*,#125421,.T.); +#125421 = EDGE_CURVE('',#125414,#125422,#125424,.T.); +#125422 = VERTEX_POINT('',#125423); +#125423 = CARTESIAN_POINT('',(92.014717,-137.668304,1.585)); +#125424 = LINE('',#125425,#125426); +#125425 = CARTESIAN_POINT('',(91.958697,-137.668304,1.585)); +#125426 = VECTOR('',#125427,1.); +#125427 = DIRECTION('',(1.,0.,0.)); +#125428 = ORIENTED_EDGE('',*,*,#125429,.T.); +#125429 = EDGE_CURVE('',#125422,#125430,#125432,.T.); +#125430 = VERTEX_POINT('',#125431); +#125431 = CARTESIAN_POINT('',(92.276201,-137.761686,1.585)); +#125432 = LINE('',#125433,#125434); +#125433 = CARTESIAN_POINT('',(92.014717,-137.668304,1.585)); +#125434 = VECTOR('',#125435,1.); +#125435 = DIRECTION('',(0.94174777823,-0.336319969966,0.)); +#125436 = ORIENTED_EDGE('',*,*,#125437,.T.); +#125437 = EDGE_CURVE('',#125430,#125438,#125440,.T.); +#125438 = VERTEX_POINT('',#125439); +#125439 = CARTESIAN_POINT('',(92.500323,-137.780364,1.585)); +#125440 = LINE('',#125441,#125442); +#125441 = CARTESIAN_POINT('',(92.276201,-137.761686,1.585)); +#125442 = VECTOR('',#125443,1.); +#125443 = DIRECTION('',(0.99654532892,-8.305063159155E-02,0.)); +#125444 = ORIENTED_EDGE('',*,*,#125445,.T.); +#125445 = EDGE_CURVE('',#125438,#125446,#125448,.T.); +#125446 = VERTEX_POINT('',#125447); +#125447 = CARTESIAN_POINT('',(92.518998,-137.799046,1.585)); +#125448 = LINE('',#125449,#125450); +#125449 = CARTESIAN_POINT('',(92.500323,-137.780364,1.585)); +#125450 = VECTOR('',#125451,1.); +#125451 = DIRECTION('',(0.706974270248,-0.707239267297,0.)); +#125452 = ORIENTED_EDGE('',*,*,#125453,.T.); +#125453 = EDGE_CURVE('',#125446,#125454,#125456,.T.); +#125454 = VERTEX_POINT('',#125455); +#125455 = CARTESIAN_POINT('',(93.004606,-137.817723,1.585)); +#125456 = LINE('',#125457,#125458); +#125457 = CARTESIAN_POINT('',(92.518998,-137.799046,1.585)); +#125458 = VECTOR('',#125459,1.); +#125459 = DIRECTION('',(0.999261192868,-3.84326479366E-02,0.)); +#125460 = ORIENTED_EDGE('',*,*,#125461,.T.); +#125461 = EDGE_CURVE('',#125454,#125462,#125464,.T.); +#125462 = VERTEX_POINT('',#125463); +#125463 = CARTESIAN_POINT('',(93.023288,-137.799046,1.585)); +#125464 = LINE('',#125465,#125466); +#125465 = CARTESIAN_POINT('',(93.004606,-137.817723,1.585)); +#125466 = VECTOR('',#125467,1.); +#125467 = DIRECTION('',(0.707201411591,0.707012138116,0.)); +#125468 = ORIENTED_EDGE('',*,*,#125469,.T.); +#125469 = EDGE_CURVE('',#125462,#125470,#125472,.T.); +#125470 = VERTEX_POINT('',#125471); +#125471 = CARTESIAN_POINT('',(93.191377,-137.799046,1.585)); +#125472 = LINE('',#125473,#125474); +#125473 = CARTESIAN_POINT('',(93.023288,-137.799046,1.585)); +#125474 = VECTOR('',#125475,1.); +#125475 = DIRECTION('',(1.,0.,0.)); +#125476 = ORIENTED_EDGE('',*,*,#125477,.T.); +#125477 = EDGE_CURVE('',#125470,#125478,#125480,.T.); +#125478 = VERTEX_POINT('',#125479); +#125479 = CARTESIAN_POINT('',(93.41551,-137.743011,1.585)); +#125480 = LINE('',#125481,#125482); +#125481 = CARTESIAN_POINT('',(93.191377,-137.799046,1.585)); +#125482 = VECTOR('',#125483,1.); +#125483 = DIRECTION('',(0.97014071783,0.242542754185,0.)); +#125484 = ORIENTED_EDGE('',*,*,#125485,.T.); +#125485 = EDGE_CURVE('',#125478,#125486,#125488,.T.); +#125486 = VERTEX_POINT('',#125487); +#125487 = CARTESIAN_POINT('',(93.508893,-137.743011,1.585)); +#125488 = LINE('',#125489,#125490); +#125489 = CARTESIAN_POINT('',(93.41551,-137.743011,1.585)); +#125490 = VECTOR('',#125491,1.); +#125491 = DIRECTION('',(1.,0.,0.)); +#125492 = ORIENTED_EDGE('',*,*,#125493,.T.); +#125493 = EDGE_CURVE('',#125486,#125494,#125496,.T.); +#125494 = VERTEX_POINT('',#125495); +#125495 = CARTESIAN_POINT('',(93.882437,-137.612273,1.585)); +#125496 = LINE('',#125497,#125498); +#125497 = CARTESIAN_POINT('',(93.508893,-137.743011,1.585)); +#125498 = VECTOR('',#125499,1.); +#125499 = DIRECTION('',(0.943860247208,0.330345022272,0.)); +#125500 = ORIENTED_EDGE('',*,*,#125501,.T.); +#125501 = EDGE_CURVE('',#125494,#125502,#125504,.T.); +#125502 = VERTEX_POINT('',#125503); +#125503 = CARTESIAN_POINT('',(94.181275,-137.462853,1.585)); +#125504 = LINE('',#125505,#125506); +#125505 = CARTESIAN_POINT('',(93.882437,-137.612273,1.585)); +#125506 = VECTOR('',#125507,1.); +#125507 = DIRECTION('',(0.894425993792,0.447215989909,0.)); +#125508 = ORIENTED_EDGE('',*,*,#125509,.T.); +#125509 = EDGE_CURVE('',#125502,#125510,#125512,.T.); +#125510 = VERTEX_POINT('',#125511); +#125511 = CARTESIAN_POINT('',(94.442748,-137.294755,1.585)); +#125512 = LINE('',#125513,#125514); +#125513 = CARTESIAN_POINT('',(94.181275,-137.462853,1.585)); +#125514 = VECTOR('',#125515,1.); +#125515 = DIRECTION('',(0.841166454859,0.54077628944,0.)); +#125516 = ORIENTED_EDGE('',*,*,#125517,.T.); +#125517 = EDGE_CURVE('',#125510,#125518,#125520,.T.); +#125518 = VERTEX_POINT('',#125519); +#125519 = CARTESIAN_POINT('',(94.778942,-136.97725,1.585)); +#125520 = LINE('',#125521,#125522); +#125521 = CARTESIAN_POINT('',(94.442748,-137.294755,1.585)); +#125522 = VECTOR('',#125523,1.); +#125523 = DIRECTION('',(0.727025626597,0.686610324909,0.)); +#125524 = ORIENTED_EDGE('',*,*,#125525,.T.); +#125525 = EDGE_CURVE('',#125518,#125526,#125528,.T.); +#125526 = VERTEX_POINT('',#125527); +#125527 = CARTESIAN_POINT('',(95.115125,-136.566352,1.585)); +#125528 = LINE('',#125529,#125530); +#125529 = CARTESIAN_POINT('',(94.778942,-136.97725,1.585)); +#125530 = VECTOR('',#125531,1.); +#125531 = DIRECTION('',(0.633230712784,0.773963089809,0.)); +#125532 = ORIENTED_EDGE('',*,*,#125533,.T.); +#125533 = EDGE_CURVE('',#125526,#125534,#125536,.T.); +#125534 = VERTEX_POINT('',#125535); +#125535 = CARTESIAN_POINT('',(95.376608,-136.006032,1.585)); +#125536 = LINE('',#125537,#125538); +#125537 = CARTESIAN_POINT('',(95.115125,-136.566352,1.585)); +#125538 = VECTOR('',#125539,1.); +#125539 = DIRECTION('',(0.422885908012,0.906182933411,0.)); +#125540 = ORIENTED_EDGE('',*,*,#125541,.T.); +#125541 = EDGE_CURVE('',#125534,#125542,#125544,.T.); +#125542 = VERTEX_POINT('',#125543); +#125543 = CARTESIAN_POINT('',(95.469989,-135.613822,1.585)); +#125544 = LINE('',#125545,#125546); +#125545 = CARTESIAN_POINT('',(95.376608,-136.006032,1.585)); +#125546 = VECTOR('',#125547,1.); +#125547 = DIRECTION('',(0.231615050366,0.972807518702,0.)); +#125548 = ORIENTED_EDGE('',*,*,#125549,.T.); +#125549 = EDGE_CURVE('',#125542,#125550,#125552,.T.); +#125550 = VERTEX_POINT('',#125551); +#125551 = CARTESIAN_POINT('',(95.507353,-135.072178,1.585)); +#125552 = LINE('',#125553,#125554); +#125553 = CARTESIAN_POINT('',(95.469989,-135.613822,1.585)); +#125554 = VECTOR('',#125555,1.); +#125555 = DIRECTION('',(6.88190323027E-02,0.997629159955,0.)); +#125556 = ORIENTED_EDGE('',*,*,#125557,.T.); +#125557 = EDGE_CURVE('',#125550,#125558,#125560,.T.); +#125558 = VERTEX_POINT('',#125559); +#125559 = CARTESIAN_POINT('',(95.488672,-135.053499,1.585)); +#125560 = LINE('',#125561,#125562); +#125561 = CARTESIAN_POINT('',(95.507353,-135.072178,1.585)); +#125562 = VECTOR('',#125563,1.); +#125563 = DIRECTION('',(-0.707144633855,0.707068926492,0.)); +#125564 = ORIENTED_EDGE('',*,*,#125565,.T.); +#125565 = EDGE_CURVE('',#125558,#125566,#125568,.T.); +#125566 = VERTEX_POINT('',#125567); +#125567 = CARTESIAN_POINT('',(95.469989,-134.735986,1.585)); +#125568 = LINE('',#125569,#125570); +#125569 = CARTESIAN_POINT('',(95.488672,-135.053499,1.585)); +#125570 = VECTOR('',#125571,1.); +#125571 = DIRECTION('',(-5.874008390483E-02,0.998273310543,0.)); +#125572 = ORIENTED_EDGE('',*,*,#125573,.T.); +#125573 = EDGE_CURVE('',#125566,#125574,#125576,.T.); +#125574 = VERTEX_POINT('',#125575); +#125575 = CARTESIAN_POINT('',(95.395282,-134.418485,1.585)); +#125576 = LINE('',#125577,#125578); +#125577 = CARTESIAN_POINT('',(95.469989,-134.735986,1.585)); +#125578 = VECTOR('',#125579,1.); +#125579 = DIRECTION('',(-0.229041896993,0.973416565208,0.)); +#125580 = ORIENTED_EDGE('',*,*,#125581,.T.); +#125581 = EDGE_CURVE('',#125574,#125582,#125584,.T.); +#125582 = VERTEX_POINT('',#125583); +#125583 = CARTESIAN_POINT('',(95.171161,-133.895515,1.585)); +#125584 = LINE('',#125585,#125586); +#125585 = CARTESIAN_POINT('',(95.395282,-134.418485,1.585)); +#125586 = VECTOR('',#125587,1.); +#125587 = DIRECTION('',(-0.393905935027,0.91915075714,0.)); +#125588 = ORIENTED_EDGE('',*,*,#125589,.T.); +#125589 = EDGE_CURVE('',#125582,#125590,#125592,.T.); +#125590 = VERTEX_POINT('',#125591); +#125591 = CARTESIAN_POINT('',(95.021741,-133.671394,1.585)); +#125592 = LINE('',#125593,#125594); +#125593 = CARTESIAN_POINT('',(95.171161,-133.895515,1.585)); +#125594 = VECTOR('',#125595,1.); +#125595 = DIRECTION('',(-0.554715617113,0.832040013539,0.)); +#125596 = ORIENTED_EDGE('',*,*,#125597,.T.); +#125597 = EDGE_CURVE('',#125590,#125598,#125600,.T.); +#125598 = VERTEX_POINT('',#125599); +#125599 = CARTESIAN_POINT('',(94.928354,-133.596682,1.585)); +#125600 = LINE('',#125601,#125602); +#125601 = CARTESIAN_POINT('',(95.021741,-133.671394,1.585)); +#125602 = VECTOR('',#125603,1.); +#125603 = DIRECTION('',(-0.780859020229,0.624707283876,0.)); +#125604 = ORIENTED_EDGE('',*,*,#125605,.T.); +#125605 = EDGE_CURVE('',#125598,#125606,#125608,.T.); +#125606 = VERTEX_POINT('',#125607); +#125607 = CARTESIAN_POINT('',(94.834975,-133.465945,1.585)); +#125608 = LINE('',#125609,#125610); +#125609 = CARTESIAN_POINT('',(94.928354,-133.596682,1.585)); +#125610 = VECTOR('',#125611,1.); +#125611 = DIRECTION('',(-0.581219352425,0.813746928945,0.)); +#125612 = ORIENTED_EDGE('',*,*,#125613,.T.); +#125613 = EDGE_CURVE('',#125606,#125614,#125616,.T.); +#125614 = VERTEX_POINT('',#125615); +#125615 = CARTESIAN_POINT('',(94.554817,-133.185791,1.585)); +#125616 = LINE('',#125617,#125618); +#125617 = CARTESIAN_POINT('',(94.834975,-133.465945,1.585)); +#125618 = VECTOR('',#125619,1.); +#125619 = DIRECTION('',(-0.707111829119,0.707101733218,0.)); +#125620 = ORIENTED_EDGE('',*,*,#125621,.T.); +#125621 = EDGE_CURVE('',#125614,#125622,#125624,.T.); +#125622 = VERTEX_POINT('',#125623); +#125623 = CARTESIAN_POINT('',(94.386719,-133.055045,1.585)); +#125624 = LINE('',#125625,#125626); +#125625 = CARTESIAN_POINT('',(94.554817,-133.185791,1.585)); +#125626 = VECTOR('',#125627,1.); +#125627 = DIRECTION('',(-0.789345137587,0.613949715993,0.)); +#125628 = ORIENTED_EDGE('',*,*,#125629,.T.); +#125629 = EDGE_CURVE('',#125622,#125630,#125632,.T.); +#125630 = VERTEX_POINT('',#125631); +#125631 = CARTESIAN_POINT('',(94.349367,-133.055045,1.585)); +#125632 = LINE('',#125633,#125634); +#125633 = CARTESIAN_POINT('',(94.386719,-133.055045,1.585)); +#125634 = VECTOR('',#125635,1.); +#125635 = DIRECTION('',(-1.,0.,0.)); +#125636 = ORIENTED_EDGE('',*,*,#125637,.T.); +#125637 = EDGE_CURVE('',#125630,#125638,#125640,.T.); +#125638 = VERTEX_POINT('',#125639); +#125639 = CARTESIAN_POINT('',(94.162597,-132.924307,1.585)); +#125640 = LINE('',#125641,#125642); +#125641 = CARTESIAN_POINT('',(94.349367,-133.055045,1.585)); +#125642 = VECTOR('',#125643,1.); +#125643 = DIRECTION('',(-0.819233981203,0.573459400517,0.)); +#125644 = ORIENTED_EDGE('',*,*,#125645,.T.); +#125645 = EDGE_CURVE('',#125638,#125646,#125648,.T.); +#125646 = VERTEX_POINT('',#125647); +#125647 = CARTESIAN_POINT('',(93.901114,-132.793563,1.585)); +#125648 = LINE('',#125649,#125650); +#125649 = CARTESIAN_POINT('',(94.162597,-132.924307,1.585)); +#125650 = VECTOR('',#125651,1.); +#125651 = DIRECTION('',(-0.894423770393,0.447220436649,0.)); +#125652 = ORIENTED_EDGE('',*,*,#125653,.T.); +#125653 = EDGE_CURVE('',#125646,#125654,#125656,.T.); +#125654 = VERTEX_POINT('',#125655); +#125655 = CARTESIAN_POINT('',(93.583599,-132.681506,1.585)); +#125656 = LINE('',#125657,#125658); +#125657 = CARTESIAN_POINT('',(93.901114,-132.793563,1.585)); +#125658 = VECTOR('',#125659,1.); +#125659 = DIRECTION('',(-0.94299696776,0.332801320304,0.)); +#125660 = ORIENTED_EDGE('',*,*,#125661,.T.); +#125661 = EDGE_CURVE('',#125654,#125662,#125664,.T.); +#125662 = VERTEX_POINT('',#125663); +#125663 = CARTESIAN_POINT('',(93.228736,-132.60679,1.585)); +#125664 = LINE('',#125665,#125666); +#125665 = CARTESIAN_POINT('',(93.583599,-132.681506,1.585)); +#125666 = VECTOR('',#125667,1.); +#125667 = DIRECTION('',(-0.978545337602,0.206031604998,0.)); +#125668 = ORIENTED_EDGE('',*,*,#125669,.T.); +#125669 = EDGE_CURVE('',#125662,#125204,#125670,.T.); +#125670 = LINE('',#125671,#125672); +#125671 = CARTESIAN_POINT('',(93.228736,-132.60679,1.585)); +#125672 = VECTOR('',#125673,1.); +#125673 = DIRECTION('',(-1.,0.,0.)); +#125674 = PLANE('',#125675); +#125675 = AXIS2_PLACEMENT_3D('',#125676,#125677,#125678); +#125676 = CARTESIAN_POINT('',(0.,0.,1.585)); +#125677 = DIRECTION('',(0.,0.,1.)); +#125678 = DIRECTION('',(1.,0.,-0.)); +#125679 = SHELL_BASED_SURFACE_MODEL('',(#125680)); +#125680 = OPEN_SHELL('',(#125681)); +#125681 = ADVANCED_FACE('',(#125682,#125927),#125995,.T.); +#125682 = FACE_BOUND('',#125683,.F.); +#125683 = EDGE_LOOP('',(#125684,#125694,#125702,#125710,#125718,#125726, + #125735,#125743,#125751,#125759,#125767,#125775,#125783,#125791, + #125799,#125808,#125816,#125824,#125833,#125841,#125849,#125857, + #125865,#125873,#125881,#125889,#125897,#125905,#125913,#125921)); +#125684 = ORIENTED_EDGE('',*,*,#125685,.T.); +#125685 = EDGE_CURVE('',#125686,#125688,#125690,.T.); +#125686 = VERTEX_POINT('',#125687); +#125687 = CARTESIAN_POINT('',(121.696883,-136.186441,1.585)); +#125688 = VERTEX_POINT('',#125689); +#125689 = CARTESIAN_POINT('',(121.85692,-136.107484,1.585)); +#125690 = LINE('',#125691,#125692); +#125691 = CARTESIAN_POINT('',(121.696883,-136.186441,1.585)); +#125692 = VECTOR('',#125693,1.); +#125693 = DIRECTION('',(0.89679384866,0.442448633183,0.)); +#125694 = ORIENTED_EDGE('',*,*,#125695,.T.); +#125695 = EDGE_CURVE('',#125688,#125696,#125698,.T.); +#125696 = VERTEX_POINT('',#125697); +#125697 = CARTESIAN_POINT('',(121.883333,-136.103933,1.585)); +#125698 = LINE('',#125699,#125700); +#125699 = CARTESIAN_POINT('',(121.85692,-136.107484,1.585)); +#125700 = VECTOR('',#125701,1.); +#125701 = DIRECTION('',(0.991083449634,0.133242620287,0.)); +#125702 = ORIENTED_EDGE('',*,*,#125703,.T.); +#125703 = EDGE_CURVE('',#125696,#125704,#125706,.T.); +#125704 = VERTEX_POINT('',#125705); +#125705 = CARTESIAN_POINT('',(122.169509,-136.105854,1.585)); +#125706 = LINE('',#125707,#125708); +#125707 = CARTESIAN_POINT('',(121.883333,-136.103933,1.585)); +#125708 = VECTOR('',#125709,1.); +#125709 = DIRECTION('',(0.999977470911,-6.712501123786E-03,0.)); +#125710 = ORIENTED_EDGE('',*,*,#125711,.T.); +#125711 = EDGE_CURVE('',#125704,#125712,#125714,.T.); +#125712 = VERTEX_POINT('',#125713); +#125713 = CARTESIAN_POINT('',(122.220955,-136.127606,1.585)); +#125714 = LINE('',#125715,#125716); +#125715 = CARTESIAN_POINT('',(122.169509,-136.105854,1.585)); +#125716 = VECTOR('',#125717,1.); +#125717 = DIRECTION('',(0.92105470034,-0.389433227885,0.)); +#125718 = ORIENTED_EDGE('',*,*,#125719,.T.); +#125719 = EDGE_CURVE('',#125712,#125720,#125722,.T.); +#125720 = VERTEX_POINT('',#125721); +#125721 = CARTESIAN_POINT('',(122.263824,-136.105854,1.585)); +#125722 = LINE('',#125723,#125724); +#125723 = CARTESIAN_POINT('',(122.220955,-136.127606,1.585)); +#125724 = VECTOR('',#125725,1.); +#125725 = DIRECTION('',(0.891769704191,0.45248955202,0.)); +#125726 = ORIENTED_EDGE('',*,*,#125727,.T.); +#125727 = EDGE_CURVE('',#125720,#125728,#125730,.T.); +#125728 = VERTEX_POINT('',#125729); +#125729 = CARTESIAN_POINT('',(122.381412,-136.184424,1.585)); +#125730 = CIRCLE('',#125731,0.100001512409); +#125731 = AXIS2_PLACEMENT_3D('',#125732,#125733,#125734); +#125732 = CARTESIAN_POINT('',(122.28333217046,-136.2039342414,1.585)); +#125733 = DIRECTION('',(0.,0.,-1.)); +#125734 = DIRECTION('',(-0.195078754268,0.9807875813,0.)); +#125735 = ORIENTED_EDGE('',*,*,#125736,.T.); +#125736 = EDGE_CURVE('',#125728,#125737,#125739,.T.); +#125737 = VERTEX_POINT('',#125738); +#125738 = CARTESIAN_POINT('',(122.381412,-137.356775,1.585)); +#125739 = LINE('',#125740,#125741); +#125740 = CARTESIAN_POINT('',(122.381412,-136.184424,1.585)); +#125741 = VECTOR('',#125742,1.); +#125742 = DIRECTION('',(0.,-1.,0.)); +#125743 = ORIENTED_EDGE('',*,*,#125744,.T.); +#125744 = EDGE_CURVE('',#125737,#125745,#125747,.T.); +#125745 = VERTEX_POINT('',#125746); +#125746 = CARTESIAN_POINT('',(122.372776,-137.381987,1.585)); +#125747 = LINE('',#125748,#125749); +#125748 = CARTESIAN_POINT('',(122.381412,-137.356775,1.585)); +#125749 = VECTOR('',#125750,1.); +#125750 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#125751 = ORIENTED_EDGE('',*,*,#125752,.T.); +#125752 = EDGE_CURVE('',#125745,#125753,#125755,.T.); +#125753 = VERTEX_POINT('',#125754); +#125754 = CARTESIAN_POINT('',(122.293668,-137.533644,1.585)); +#125755 = LINE('',#125756,#125757); +#125756 = CARTESIAN_POINT('',(122.372776,-137.381987,1.585)); +#125757 = VECTOR('',#125758,1.); +#125758 = DIRECTION('',(-0.462486085634,-0.886626539528,0.)); +#125759 = ORIENTED_EDGE('',*,*,#125760,.T.); +#125760 = EDGE_CURVE('',#125753,#125761,#125763,.T.); +#125761 = VERTEX_POINT('',#125762); +#125762 = CARTESIAN_POINT('',(122.203119,-137.621422,1.585)); +#125763 = LINE('',#125764,#125765); +#125764 = CARTESIAN_POINT('',(122.293668,-137.533644,1.585)); +#125765 = VECTOR('',#125766,1.); +#125766 = DIRECTION('',(-0.718007742681,-0.696035115098,0.)); +#125767 = ORIENTED_EDGE('',*,*,#125768,.T.); +#125768 = EDGE_CURVE('',#125761,#125769,#125771,.T.); +#125769 = VERTEX_POINT('',#125770); +#125770 = CARTESIAN_POINT('',(122.043079,-137.700382,1.585)); +#125771 = LINE('',#125772,#125773); +#125772 = CARTESIAN_POINT('',(122.203119,-137.621422,1.585)); +#125773 = VECTOR('',#125774,1.); +#125774 = DIRECTION('',(-0.896790469289,-0.442455482724,0.)); +#125775 = ORIENTED_EDGE('',*,*,#125776,.T.); +#125776 = EDGE_CURVE('',#125769,#125777,#125779,.T.); +#125777 = VERTEX_POINT('',#125778); +#125778 = CARTESIAN_POINT('',(122.016666,-137.703933,1.585)); +#125779 = LINE('',#125780,#125781); +#125780 = CARTESIAN_POINT('',(122.043079,-137.700382,1.585)); +#125781 = VECTOR('',#125782,1.); +#125782 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#125783 = ORIENTED_EDGE('',*,*,#125784,.T.); +#125784 = EDGE_CURVE('',#125777,#125785,#125787,.T.); +#125785 = VERTEX_POINT('',#125786); +#125786 = CARTESIAN_POINT('',(121.793836,-137.700636,1.585)); +#125787 = LINE('',#125788,#125789); +#125788 = CARTESIAN_POINT('',(122.016666,-137.703933,1.585)); +#125789 = VECTOR('',#125790,1.); +#125790 = DIRECTION('',(-0.999890556675,1.479441352314E-02,0.)); +#125791 = ORIENTED_EDGE('',*,*,#125792,.T.); +#125792 = EDGE_CURVE('',#125785,#125793,#125795,.T.); +#125793 = VERTEX_POINT('',#125794); +#125794 = CARTESIAN_POINT('',(121.638611,-137.626709,1.585)); +#125795 = LINE('',#125796,#125797); +#125796 = CARTESIAN_POINT('',(121.793836,-137.700636,1.585)); +#125797 = VECTOR('',#125798,1.); +#125798 = DIRECTION('',(-0.902837187736,0.429982572252,0.)); +#125799 = ORIENTED_EDGE('',*,*,#125800,.T.); +#125800 = EDGE_CURVE('',#125793,#125801,#125803,.T.); +#125801 = VERTEX_POINT('',#125802); +#125802 = CARTESIAN_POINT('',(121.709746,-137.440817,1.585)); +#125803 = CIRCLE('',#125804,0.100000424667); +#125804 = AXIS2_PLACEMENT_3D('',#125805,#125806,#125807); +#125805 = CARTESIAN_POINT('',(121.68333310072,-137.5372661766,1.585)); +#125806 = DIRECTION('',(0.,0.,-1.)); +#125807 = DIRECTION('',(-0.447219108045,-0.894424434706,-0.)); +#125808 = ORIENTED_EDGE('',*,*,#125809,.T.); +#125809 = EDGE_CURVE('',#125801,#125810,#125812,.T.); +#125810 = VERTEX_POINT('',#125811); +#125811 = CARTESIAN_POINT('',(121.840274,-137.503933,1.585)); +#125812 = LINE('',#125813,#125814); +#125813 = CARTESIAN_POINT('',(121.709746,-137.440817,1.585)); +#125814 = VECTOR('',#125815,1.); +#125815 = DIRECTION('',(0.900274715498,-0.435322221618,0.)); +#125816 = ORIENTED_EDGE('',*,*,#125817,.T.); +#125817 = EDGE_CURVE('',#125810,#125818,#125820,.T.); +#125818 = VERTEX_POINT('',#125819); +#125819 = CARTESIAN_POINT('',(121.993059,-137.503933,1.585)); +#125820 = LINE('',#125821,#125822); +#125821 = CARTESIAN_POINT('',(121.840274,-137.503933,1.585)); +#125822 = VECTOR('',#125823,1.); +#125823 = DIRECTION('',(1.,0.,0.)); +#125824 = ORIENTED_EDGE('',*,*,#125825,.T.); +#125825 = EDGE_CURVE('',#125818,#125826,#125828,.T.); +#125826 = VERTEX_POINT('',#125827); +#125827 = CARTESIAN_POINT('',(122.183333,-137.313659,1.585)); +#125828 = CIRCLE('',#125829,0.267251693091); +#125829 = AXIS2_PLACEMENT_3D('',#125830,#125831,#125832); +#125830 = CARTESIAN_POINT('',(121.924915,-137.245515,1.585)); +#125831 = DIRECTION('',(0.,0.,1.)); +#125832 = DIRECTION('',(0.254980611018,-0.966946166032,0.)); +#125833 = ORIENTED_EDGE('',*,*,#125834,.T.); +#125834 = EDGE_CURVE('',#125826,#125835,#125837,.T.); +#125835 = VERTEX_POINT('',#125836); +#125836 = CARTESIAN_POINT('',(122.183333,-137.231066,1.585)); +#125837 = LINE('',#125838,#125839); +#125838 = CARTESIAN_POINT('',(122.183333,-137.313659,1.585)); +#125839 = VECTOR('',#125840,1.); +#125840 = DIRECTION('',(0.,1.,0.)); +#125841 = ORIENTED_EDGE('',*,*,#125842,.T.); +#125842 = EDGE_CURVE('',#125835,#125843,#125845,.T.); +#125843 = VERTEX_POINT('',#125844); +#125844 = CARTESIAN_POINT('',(122.15,-137.237266,1.585)); +#125845 = LINE('',#125846,#125847); +#125846 = CARTESIAN_POINT('',(122.183333,-137.231066,1.585)); +#125847 = VECTOR('',#125848,1.); +#125848 = DIRECTION('',(-0.98313794253,-0.182865485966,0.)); +#125849 = ORIENTED_EDGE('',*,*,#125850,.T.); +#125850 = EDGE_CURVE('',#125843,#125851,#125853,.T.); +#125851 = VERTEX_POINT('',#125852); +#125852 = CARTESIAN_POINT('',(121.863824,-137.235345,1.585)); +#125853 = LINE('',#125854,#125855); +#125854 = CARTESIAN_POINT('',(122.15,-137.237266,1.585)); +#125855 = VECTOR('',#125856,1.); +#125856 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#125857 = ORIENTED_EDGE('',*,*,#125858,.T.); +#125858 = EDGE_CURVE('',#125851,#125859,#125861,.T.); +#125859 = VERTEX_POINT('',#125860); +#125860 = CARTESIAN_POINT('',(121.838612,-137.226709,1.585)); +#125861 = LINE('',#125862,#125863); +#125862 = CARTESIAN_POINT('',(121.863824,-137.235345,1.585)); +#125863 = VECTOR('',#125864,1.); +#125864 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#125865 = ORIENTED_EDGE('',*,*,#125866,.T.); +#125866 = EDGE_CURVE('',#125859,#125867,#125869,.T.); +#125867 = VERTEX_POINT('',#125868); +#125868 = CARTESIAN_POINT('',(121.686958,-137.147605,1.585)); +#125869 = LINE('',#125870,#125871); +#125870 = CARTESIAN_POINT('',(121.838612,-137.226709,1.585)); +#125871 = VECTOR('',#125872,1.); +#125872 = DIRECTION('',(-0.886632377277,0.462474893983,0.)); +#125873 = ORIENTED_EDGE('',*,*,#125874,.T.); +#125874 = EDGE_CURVE('',#125867,#125875,#125877,.T.); +#125875 = VERTEX_POINT('',#125876); +#125876 = CARTESIAN_POINT('',(121.599176,-137.057053,1.585)); +#125877 = LINE('',#125878,#125879); +#125878 = CARTESIAN_POINT('',(121.686958,-137.147605,1.585)); +#125879 = VECTOR('',#125880,1.); +#125880 = DIRECTION('',(-0.696039578142,0.718003416189,0.)); +#125881 = ORIENTED_EDGE('',*,*,#125882,.T.); +#125882 = EDGE_CURVE('',#125875,#125883,#125885,.T.); +#125883 = VERTEX_POINT('',#125884); +#125884 = CARTESIAN_POINT('',(121.520217,-136.897013,1.585)); +#125885 = LINE('',#125886,#125887); +#125886 = CARTESIAN_POINT('',(121.599176,-137.057053,1.585)); +#125887 = VECTOR('',#125888,1.); +#125888 = DIRECTION('',(-0.442450976154,0.896792692711,0.)); +#125889 = ORIENTED_EDGE('',*,*,#125890,.T.); +#125890 = EDGE_CURVE('',#125883,#125891,#125893,.T.); +#125891 = VERTEX_POINT('',#125892); +#125892 = CARTESIAN_POINT('',(121.516666,-136.8706,1.585)); +#125893 = LINE('',#125894,#125895); +#125894 = CARTESIAN_POINT('',(121.520217,-136.897013,1.585)); +#125895 = VECTOR('',#125896,1.); +#125896 = DIRECTION('',(-0.133242620288,0.991083449634,0.)); +#125897 = ORIENTED_EDGE('',*,*,#125898,.T.); +#125898 = EDGE_CURVE('',#125891,#125899,#125901,.T.); +#125899 = VERTEX_POINT('',#125900); +#125900 = CARTESIAN_POINT('',(121.518587,-136.451091,1.585)); +#125901 = LINE('',#125902,#125903); +#125902 = CARTESIAN_POINT('',(121.516666,-136.8706,1.585)); +#125903 = VECTOR('',#125904,1.); +#125904 = DIRECTION('',(4.579114774285E-03,0.999989515799,0.)); +#125905 = ORIENTED_EDGE('',*,*,#125906,.T.); +#125906 = EDGE_CURVE('',#125899,#125907,#125909,.T.); +#125907 = VERTEX_POINT('',#125908); +#125908 = CARTESIAN_POINT('',(121.527223,-136.425879,1.585)); +#125909 = LINE('',#125910,#125911); +#125910 = CARTESIAN_POINT('',(121.518587,-136.451091,1.585)); +#125911 = VECTOR('',#125912,1.); +#125912 = DIRECTION('',(0.32405186212,0.946039317712,0.)); +#125913 = ORIENTED_EDGE('',*,*,#125914,.T.); +#125914 = EDGE_CURVE('',#125907,#125915,#125917,.T.); +#125915 = VERTEX_POINT('',#125916); +#125916 = CARTESIAN_POINT('',(121.60633,-136.274221,1.585)); +#125917 = LINE('',#125918,#125919); +#125918 = CARTESIAN_POINT('',(121.527223,-136.425879,1.585)); +#125919 = VECTOR('',#125920,1.); +#125920 = DIRECTION('',(0.462479092578,0.886630187242,0.)); +#125921 = ORIENTED_EDGE('',*,*,#125922,.T.); +#125922 = EDGE_CURVE('',#125915,#125686,#125923,.T.); +#125923 = LINE('',#125924,#125925); +#125924 = CARTESIAN_POINT('',(121.60633,-136.274221,1.585)); +#125925 = VECTOR('',#125926,1.); +#125926 = DIRECTION('',(0.718015182968,0.696027439852,0.)); +#125927 = FACE_BOUND('',#125928,.F.); +#125928 = EDGE_LOOP('',(#125929,#125939,#125947,#125956,#125964,#125973, + #125981,#125989)); +#125929 = ORIENTED_EDGE('',*,*,#125930,.T.); +#125930 = EDGE_CURVE('',#125931,#125933,#125935,.T.); +#125931 = VERTEX_POINT('',#125932); +#125932 = CARTESIAN_POINT('',(122.183333,-136.332403,1.585)); +#125933 = VERTEX_POINT('',#125934); +#125934 = CARTESIAN_POINT('',(122.126392,-136.303933,1.585)); +#125935 = LINE('',#125936,#125937); +#125936 = CARTESIAN_POINT('',(122.183333,-136.332403,1.585)); +#125937 = VECTOR('',#125938,1.); +#125938 = DIRECTION('',(-0.894430332582,0.447207312281,0.)); +#125939 = ORIENTED_EDGE('',*,*,#125940,.T.); +#125940 = EDGE_CURVE('',#125933,#125941,#125943,.T.); +#125941 = VERTEX_POINT('',#125942); +#125942 = CARTESIAN_POINT('',(121.906941,-136.303933,1.585)); +#125943 = LINE('',#125944,#125945); +#125944 = CARTESIAN_POINT('',(122.126392,-136.303933,1.585)); +#125945 = VECTOR('',#125946,1.); +#125946 = DIRECTION('',(-1.,0.,0.)); +#125947 = ORIENTED_EDGE('',*,*,#125948,.T.); +#125948 = EDGE_CURVE('',#125941,#125949,#125951,.T.); +#125949 = VERTEX_POINT('',#125950); +#125950 = CARTESIAN_POINT('',(121.716666,-136.494207,1.585)); +#125951 = CIRCLE('',#125952,0.267248556225); +#125952 = AXIS2_PLACEMENT_3D('',#125953,#125954,#125955); +#125953 = CARTESIAN_POINT('',(121.97508135812,-136.5623487162,1.585)); +#125954 = DIRECTION('',(0.,0.,1.)); +#125955 = DIRECTION('',(-0.254969976573,0.966948970239,0.)); +#125956 = ORIENTED_EDGE('',*,*,#125957,.T.); +#125957 = EDGE_CURVE('',#125949,#125958,#125960,.T.); +#125958 = VERTEX_POINT('',#125959); +#125959 = CARTESIAN_POINT('',(121.716666,-136.846991,1.585)); +#125960 = LINE('',#125961,#125962); +#125961 = CARTESIAN_POINT('',(121.716666,-136.494207,1.585)); +#125962 = VECTOR('',#125963,1.); +#125963 = DIRECTION('',(0.,-1.,0.)); +#125964 = ORIENTED_EDGE('',*,*,#125965,.T.); +#125965 = EDGE_CURVE('',#125958,#125966,#125968,.T.); +#125966 = VERTEX_POINT('',#125967); +#125967 = CARTESIAN_POINT('',(121.90694,-137.037266,1.585)); +#125968 = CIRCLE('',#125969,0.267251611057); +#125969 = AXIS2_PLACEMENT_3D('',#125970,#125971,#125972); +#125970 = CARTESIAN_POINT('',(121.97508421626,-136.7788481418,1.585)); +#125971 = DIRECTION('',(0.,0.,1.)); +#125972 = DIRECTION('',(-0.966947272063,-0.254976416656,0.)); +#125973 = ORIENTED_EDGE('',*,*,#125974,.T.); +#125974 = EDGE_CURVE('',#125966,#125975,#125977,.T.); +#125975 = VERTEX_POINT('',#125976); +#125976 = CARTESIAN_POINT('',(122.126393,-137.037266,1.585)); +#125977 = LINE('',#125978,#125979); +#125978 = CARTESIAN_POINT('',(121.90694,-137.037266,1.585)); +#125979 = VECTOR('',#125980,1.); +#125980 = DIRECTION('',(1.,0.,0.)); +#125981 = ORIENTED_EDGE('',*,*,#125982,.T.); +#125982 = EDGE_CURVE('',#125975,#125983,#125985,.T.); +#125983 = VERTEX_POINT('',#125984); +#125984 = CARTESIAN_POINT('',(122.183333,-137.008796,1.585)); +#125985 = LINE('',#125986,#125987); +#125986 = CARTESIAN_POINT('',(122.126393,-137.037266,1.585)); +#125987 = VECTOR('',#125988,1.); +#125988 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#125989 = ORIENTED_EDGE('',*,*,#125990,.T.); +#125990 = EDGE_CURVE('',#125983,#125931,#125991,.T.); +#125991 = LINE('',#125992,#125993); +#125992 = CARTESIAN_POINT('',(122.183333,-137.008796,1.585)); +#125993 = VECTOR('',#125994,1.); +#125994 = DIRECTION('',(0.,1.,0.)); +#125995 = PLANE('',#125996); +#125996 = AXIS2_PLACEMENT_3D('',#125997,#125998,#125999); +#125997 = CARTESIAN_POINT('',(0.,0.,1.585)); +#125998 = DIRECTION('',(0.,0.,1.)); +#125999 = DIRECTION('',(1.,0.,-0.)); +#126000 = SHELL_BASED_SURFACE_MODEL('',(#126001)); +#126001 = OPEN_SHELL('',(#126002)); +#126002 = ADVANCED_FACE('',(#126003),#126097,.T.); +#126003 = FACE_BOUND('',#126004,.F.); +#126004 = EDGE_LOOP('',(#126005,#126016,#126024,#126032,#126040,#126049, + #126057,#126066,#126074,#126083,#126091)); +#126005 = ORIENTED_EDGE('',*,*,#126006,.T.); +#126006 = EDGE_CURVE('',#126007,#126009,#126011,.T.); +#126007 = VERTEX_POINT('',#126008); +#126008 = CARTESIAN_POINT('',(144.919567,-136.377039,1.585)); +#126009 = VERTEX_POINT('',#126010); +#126010 = CARTESIAN_POINT('',(145.035,-136.4,1.585)); +#126011 = CIRCLE('',#126012,6.000007318647E-02); +#126012 = AXIS2_PLACEMENT_3D('',#126013,#126014,#126015); +#126013 = CARTESIAN_POINT('',(144.97499992681,-136.3999998233,1.585)); +#126014 = DIRECTION('',(0.,0.,-1.)); +#126015 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#126016 = ORIENTED_EDGE('',*,*,#126017,.T.); +#126017 = EDGE_CURVE('',#126009,#126018,#126020,.T.); +#126018 = VERTEX_POINT('',#126019); +#126019 = CARTESIAN_POINT('',(145.035,-137.54,1.585)); +#126020 = LINE('',#126021,#126022); +#126021 = CARTESIAN_POINT('',(145.035,-136.4,1.585)); +#126022 = VECTOR('',#126023,1.); +#126023 = DIRECTION('',(0.,-1.,0.)); +#126024 = ORIENTED_EDGE('',*,*,#126025,.T.); +#126025 = EDGE_CURVE('',#126018,#126026,#126028,.T.); +#126026 = VERTEX_POINT('',#126027); +#126027 = CARTESIAN_POINT('',(151.315,-137.54,1.585)); +#126028 = LINE('',#126029,#126030); +#126029 = CARTESIAN_POINT('',(145.035,-137.54,1.585)); +#126030 = VECTOR('',#126031,1.); +#126031 = DIRECTION('',(1.,0.,0.)); +#126032 = ORIENTED_EDGE('',*,*,#126033,.T.); +#126033 = EDGE_CURVE('',#126026,#126034,#126036,.T.); +#126034 = VERTEX_POINT('',#126035); +#126035 = CARTESIAN_POINT('',(151.315,-136.4,1.585)); +#126036 = LINE('',#126037,#126038); +#126037 = CARTESIAN_POINT('',(151.315,-137.54,1.585)); +#126038 = VECTOR('',#126039,1.); +#126039 = DIRECTION('',(0.,1.,0.)); +#126040 = ORIENTED_EDGE('',*,*,#126041,.T.); +#126041 = EDGE_CURVE('',#126034,#126042,#126044,.T.); +#126042 = VERTEX_POINT('',#126043); +#126043 = CARTESIAN_POINT('',(151.435,-136.4,1.585)); +#126044 = CIRCLE('',#126045,6.000000000042E-02); +#126045 = AXIS2_PLACEMENT_3D('',#126046,#126047,#126048); +#126046 = CARTESIAN_POINT('',(151.375,-136.3999997744,1.585)); +#126047 = DIRECTION('',(0.,0.,-1.)); +#126048 = DIRECTION('',(-0.999999999993,-3.759794253684E-06,-0.)); +#126049 = ORIENTED_EDGE('',*,*,#126050,.T.); +#126050 = EDGE_CURVE('',#126042,#126051,#126053,.T.); +#126051 = VERTEX_POINT('',#126052); +#126052 = CARTESIAN_POINT('',(151.435,-137.6,1.585)); +#126053 = LINE('',#126054,#126055); +#126054 = CARTESIAN_POINT('',(151.435,-136.4,1.585)); +#126055 = VECTOR('',#126056,1.); +#126056 = DIRECTION('',(0.,-1.,0.)); +#126057 = ORIENTED_EDGE('',*,*,#126058,.T.); +#126058 = EDGE_CURVE('',#126051,#126059,#126061,.T.); +#126059 = VERTEX_POINT('',#126060); +#126060 = CARTESIAN_POINT('',(151.375,-137.66,1.585)); +#126061 = CIRCLE('',#126062,5.999932016262E-02); +#126062 = AXIS2_PLACEMENT_3D('',#126063,#126064,#126065); +#126063 = CARTESIAN_POINT('',(151.37500067984,-137.6000006798,1.585)); +#126064 = DIRECTION('',(0.,0.,-1.)); +#126065 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#126066 = ORIENTED_EDGE('',*,*,#126067,.T.); +#126067 = EDGE_CURVE('',#126059,#126068,#126070,.T.); +#126068 = VERTEX_POINT('',#126069); +#126069 = CARTESIAN_POINT('',(144.975,-137.66,1.585)); +#126070 = LINE('',#126071,#126072); +#126071 = CARTESIAN_POINT('',(151.375,-137.66,1.585)); +#126072 = VECTOR('',#126073,1.); +#126073 = DIRECTION('',(-1.,0.,0.)); +#126074 = ORIENTED_EDGE('',*,*,#126075,.T.); +#126075 = EDGE_CURVE('',#126068,#126076,#126078,.T.); +#126076 = VERTEX_POINT('',#126077); +#126077 = CARTESIAN_POINT('',(144.915,-137.6,1.585)); +#126078 = CIRCLE('',#126079,5.999932016268E-02); +#126079 = AXIS2_PLACEMENT_3D('',#126080,#126081,#126082); +#126080 = CARTESIAN_POINT('',(144.97499932015,-137.6000006798,1.585)); +#126081 = DIRECTION('',(0.,0.,-1.)); +#126082 = DIRECTION('',(1.133081470031E-05,-0.999999999936,0.)); +#126083 = ORIENTED_EDGE('',*,*,#126084,.T.); +#126084 = EDGE_CURVE('',#126076,#126085,#126087,.T.); +#126085 = VERTEX_POINT('',#126086); +#126086 = CARTESIAN_POINT('',(144.915,-136.4,1.585)); +#126087 = LINE('',#126088,#126089); +#126088 = CARTESIAN_POINT('',(144.915,-137.6,1.585)); +#126089 = VECTOR('',#126090,1.); +#126090 = DIRECTION('',(0.,1.,0.)); +#126091 = ORIENTED_EDGE('',*,*,#126092,.T.); +#126092 = EDGE_CURVE('',#126085,#126007,#126093,.T.); +#126093 = LINE('',#126094,#126095); +#126094 = CARTESIAN_POINT('',(144.915,-136.4,1.585)); +#126095 = VECTOR('',#126096,1.); +#126096 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#126097 = PLANE('',#126098); +#126098 = AXIS2_PLACEMENT_3D('',#126099,#126100,#126101); +#126099 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126100 = DIRECTION('',(0.,0.,1.)); +#126101 = DIRECTION('',(1.,0.,-0.)); +#126102 = SHELL_BASED_SURFACE_MODEL('',(#126103)); +#126103 = OPEN_SHELL('',(#126104)); +#126104 = ADVANCED_FACE('',(#126105,#126333),#126384,.T.); +#126105 = FACE_BOUND('',#126106,.F.); +#126106 = EDGE_LOOP('',(#126107,#126117,#126125,#126133,#126141,#126149, + #126157,#126165,#126173,#126182,#126190,#126198,#126206,#126214, + #126222,#126230,#126239,#126247,#126255,#126263,#126271,#126279, + #126287,#126295,#126303,#126311,#126319,#126327)); +#126107 = ORIENTED_EDGE('',*,*,#126108,.T.); +#126108 = EDGE_CURVE('',#126109,#126111,#126113,.T.); +#126109 = VERTEX_POINT('',#126110); +#126110 = CARTESIAN_POINT('',(119.705278,-136.181157,1.585)); +#126111 = VERTEX_POINT('',#126112); +#126112 = CARTESIAN_POINT('',(119.860503,-136.107229,1.585)); +#126113 = LINE('',#126114,#126115); +#126114 = CARTESIAN_POINT('',(119.705278,-136.181157,1.585)); +#126115 = VECTOR('',#126116,1.); +#126116 = DIRECTION('',(0.902834929812,0.429987313198,0.)); +#126117 = ORIENTED_EDGE('',*,*,#126118,.T.); +#126118 = EDGE_CURVE('',#126111,#126119,#126121,.T.); +#126119 = VERTEX_POINT('',#126120); +#126120 = CARTESIAN_POINT('',(119.883333,-136.103933,1.585)); +#126121 = LINE('',#126122,#126123); +#126122 = CARTESIAN_POINT('',(119.860503,-136.107229,1.585)); +#126123 = VECTOR('',#126124,1.); +#126124 = DIRECTION('',(0.989738577733,0.142889984765,0.)); +#126125 = ORIENTED_EDGE('',*,*,#126126,.T.); +#126126 = EDGE_CURVE('',#126119,#126127,#126129,.T.); +#126127 = VERTEX_POINT('',#126128); +#126128 = CARTESIAN_POINT('',(120.169509,-136.105854,1.585)); +#126129 = LINE('',#126130,#126131); +#126130 = CARTESIAN_POINT('',(119.883333,-136.103933,1.585)); +#126131 = VECTOR('',#126132,1.); +#126132 = DIRECTION('',(0.999977470911,-6.712501123786E-03,0.)); +#126133 = ORIENTED_EDGE('',*,*,#126134,.T.); +#126134 = EDGE_CURVE('',#126127,#126135,#126137,.T.); +#126135 = VERTEX_POINT('',#126136); +#126136 = CARTESIAN_POINT('',(120.194722,-136.11449,1.585)); +#126137 = LINE('',#126138,#126139); +#126138 = CARTESIAN_POINT('',(120.169509,-136.105854,1.585)); +#126139 = VECTOR('',#126140,1.); +#126140 = DIRECTION('',(0.946043257817,-0.324040359121,0.)); +#126141 = ORIENTED_EDGE('',*,*,#126142,.T.); +#126142 = EDGE_CURVE('',#126135,#126143,#126145,.T.); +#126143 = VERTEX_POINT('',#126144); +#126144 = CARTESIAN_POINT('',(120.344645,-136.1916,1.585)); +#126145 = LINE('',#126146,#126147); +#126146 = CARTESIAN_POINT('',(120.194722,-136.11449,1.585)); +#126147 = VECTOR('',#126148,1.); +#126148 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#126149 = ORIENTED_EDGE('',*,*,#126150,.T.); +#126150 = EDGE_CURVE('',#126143,#126151,#126153,.T.); +#126151 = VERTEX_POINT('',#126152); +#126152 = CARTESIAN_POINT('',(120.372776,-136.225878,1.585)); +#126153 = LINE('',#126154,#126155); +#126154 = CARTESIAN_POINT('',(120.344645,-136.1916,1.585)); +#126155 = VECTOR('',#126156,1.); +#126156 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#126157 = ORIENTED_EDGE('',*,*,#126158,.T.); +#126158 = EDGE_CURVE('',#126151,#126159,#126161,.T.); +#126159 = VERTEX_POINT('',#126160); +#126160 = CARTESIAN_POINT('',(120.446703,-136.381103,1.585)); +#126161 = LINE('',#126162,#126163); +#126162 = CARTESIAN_POINT('',(120.372776,-136.225878,1.585)); +#126163 = VECTOR('',#126164,1.); +#126164 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#126165 = ORIENTED_EDGE('',*,*,#126166,.T.); +#126166 = EDGE_CURVE('',#126159,#126167,#126169,.T.); +#126167 = VERTEX_POINT('',#126168); +#126168 = CARTESIAN_POINT('',(120.45,-136.537266,1.585)); +#126169 = LINE('',#126170,#126171); +#126170 = CARTESIAN_POINT('',(120.446703,-136.381103,1.585)); +#126171 = VECTOR('',#126172,1.); +#126172 = DIRECTION('',(2.110785168813E-02,-0.99977720448,0.)); +#126173 = ORIENTED_EDGE('',*,*,#126174,.T.); +#126174 = EDGE_CURVE('',#126167,#126175,#126177,.T.); +#126175 = VERTEX_POINT('',#126176); +#126176 = CARTESIAN_POINT('',(120.388365,-136.629614,1.585)); +#126177 = CIRCLE('',#126178,9.999927715315E-02); +#126178 = AXIS2_PLACEMENT_3D('',#126179,#126180,#126181); +#126179 = CARTESIAN_POINT('',(120.35000072284,-136.5372666249,1.585)); +#126180 = DIRECTION('',(0.,0.,-1.)); +#126181 = DIRECTION('',(0.99999999998,6.250022282832E-06,0.)); +#126182 = ORIENTED_EDGE('',*,*,#126183,.T.); +#126183 = EDGE_CURVE('',#126175,#126184,#126186,.T.); +#126184 = VERTEX_POINT('',#126185); +#126185 = CARTESIAN_POINT('',(119.783333,-136.75258,1.585)); +#126186 = LINE('',#126187,#126188); +#126187 = CARTESIAN_POINT('',(120.388365,-136.629614,1.585)); +#126188 = VECTOR('',#126189,1.); +#126189 = DIRECTION('',(-0.979965551748,-0.199167058992,0.)); +#126190 = ORIENTED_EDGE('',*,*,#126191,.T.); +#126191 = EDGE_CURVE('',#126184,#126192,#126194,.T.); +#126192 = VERTEX_POINT('',#126193); +#126193 = CARTESIAN_POINT('',(119.783333,-136.913659,1.585)); +#126194 = LINE('',#126195,#126196); +#126195 = CARTESIAN_POINT('',(119.783333,-136.75258,1.585)); +#126196 = VECTOR('',#126197,1.); +#126197 = DIRECTION('',(0.,-1.,0.)); +#126198 = ORIENTED_EDGE('',*,*,#126199,.T.); +#126199 = EDGE_CURVE('',#126192,#126200,#126202,.T.); +#126200 = VERTEX_POINT('',#126201); +#126201 = CARTESIAN_POINT('',(119.824535,-136.996064,1.585)); +#126202 = LINE('',#126203,#126204); +#126203 = CARTESIAN_POINT('',(119.783333,-136.913659,1.585)); +#126204 = VECTOR('',#126205,1.); +#126205 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#126206 = ORIENTED_EDGE('',*,*,#126207,.T.); +#126207 = EDGE_CURVE('',#126200,#126208,#126210,.T.); +#126208 = VERTEX_POINT('',#126209); +#126209 = CARTESIAN_POINT('',(119.90694,-137.037266,1.585)); +#126210 = LINE('',#126211,#126212); +#126211 = CARTESIAN_POINT('',(119.824535,-136.996064,1.585)); +#126212 = VECTOR('',#126213,1.); +#126213 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#126214 = ORIENTED_EDGE('',*,*,#126215,.T.); +#126215 = EDGE_CURVE('',#126208,#126216,#126218,.T.); +#126216 = VERTEX_POINT('',#126217); +#126217 = CARTESIAN_POINT('',(120.126393,-137.037266,1.585)); +#126218 = LINE('',#126219,#126220); +#126219 = CARTESIAN_POINT('',(119.90694,-137.037266,1.585)); +#126220 = VECTOR('',#126221,1.); +#126221 = DIRECTION('',(1.,0.,0.)); +#126222 = ORIENTED_EDGE('',*,*,#126223,.T.); +#126223 = EDGE_CURVE('',#126216,#126224,#126226,.T.); +#126224 = VERTEX_POINT('',#126225); +#126225 = CARTESIAN_POINT('',(120.256921,-136.974151,1.585)); +#126226 = LINE('',#126227,#126228); +#126227 = CARTESIAN_POINT('',(120.126393,-137.037266,1.585)); +#126228 = VECTOR('',#126229,1.); +#126229 = DIRECTION('',(0.900277418559,0.435316631468,0.)); +#126230 = ORIENTED_EDGE('',*,*,#126231,.T.); +#126231 = EDGE_CURVE('',#126224,#126232,#126234,.T.); +#126232 = VERTEX_POINT('',#126233); +#126233 = CARTESIAN_POINT('',(120.344645,-137.1496,1.585)); +#126234 = CIRCLE('',#126235,0.100000294132); +#126235 = AXIS2_PLACEMENT_3D('',#126236,#126237,#126238); +#126236 = CARTESIAN_POINT('',(120.28333371921,-137.0706000906,1.585)); +#126237 = DIRECTION('',(0.,0.,-1.)); +#126238 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#126239 = ORIENTED_EDGE('',*,*,#126240,.T.); +#126240 = EDGE_CURVE('',#126232,#126241,#126243,.T.); +#126241 = VERTEX_POINT('',#126242); +#126242 = CARTESIAN_POINT('',(120.176413,-137.233715,1.585)); +#126243 = LINE('',#126244,#126245); +#126244 = CARTESIAN_POINT('',(120.344645,-137.1496,1.585)); +#126245 = VECTOR('',#126246,1.); +#126246 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#126247 = ORIENTED_EDGE('',*,*,#126248,.T.); +#126248 = EDGE_CURVE('',#126241,#126249,#126251,.T.); +#126249 = VERTEX_POINT('',#126250); +#126250 = CARTESIAN_POINT('',(120.15,-137.237266,1.585)); +#126251 = LINE('',#126252,#126253); +#126252 = CARTESIAN_POINT('',(120.176413,-137.233715,1.585)); +#126253 = VECTOR('',#126254,1.); +#126254 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#126255 = ORIENTED_EDGE('',*,*,#126256,.T.); +#126256 = EDGE_CURVE('',#126249,#126257,#126259,.T.); +#126257 = VERTEX_POINT('',#126258); +#126258 = CARTESIAN_POINT('',(119.863824,-137.235345,1.585)); +#126259 = LINE('',#126260,#126261); +#126260 = CARTESIAN_POINT('',(120.15,-137.237266,1.585)); +#126261 = VECTOR('',#126262,1.); +#126262 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#126263 = ORIENTED_EDGE('',*,*,#126264,.T.); +#126264 = EDGE_CURVE('',#126257,#126265,#126267,.T.); +#126265 = VERTEX_POINT('',#126266); +#126266 = CARTESIAN_POINT('',(119.838612,-137.226709,1.585)); +#126267 = LINE('',#126268,#126269); +#126268 = CARTESIAN_POINT('',(119.863824,-137.235345,1.585)); +#126269 = VECTOR('',#126270,1.); +#126270 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#126271 = ORIENTED_EDGE('',*,*,#126272,.T.); +#126272 = EDGE_CURVE('',#126265,#126273,#126275,.T.); +#126273 = VERTEX_POINT('',#126274); +#126274 = CARTESIAN_POINT('',(119.688689,-137.1496,1.585)); +#126275 = LINE('',#126276,#126277); +#126276 = CARTESIAN_POINT('',(119.838612,-137.226709,1.585)); +#126277 = VECTOR('',#126278,1.); +#126278 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#126279 = ORIENTED_EDGE('',*,*,#126280,.T.); +#126280 = EDGE_CURVE('',#126273,#126281,#126283,.T.); +#126281 = VERTEX_POINT('',#126282); +#126282 = CARTESIAN_POINT('',(119.660557,-137.115321,1.585)); +#126283 = LINE('',#126284,#126285); +#126284 = CARTESIAN_POINT('',(119.688689,-137.1496,1.585)); +#126285 = VECTOR('',#126286,1.); +#126286 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#126287 = ORIENTED_EDGE('',*,*,#126288,.T.); +#126288 = EDGE_CURVE('',#126281,#126289,#126291,.T.); +#126289 = VERTEX_POINT('',#126290); +#126290 = CARTESIAN_POINT('',(119.586629,-136.960095,1.585)); +#126291 = LINE('',#126292,#126293); +#126292 = CARTESIAN_POINT('',(119.660557,-137.115321,1.585)); +#126293 = VECTOR('',#126294,1.); +#126294 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#126295 = ORIENTED_EDGE('',*,*,#126296,.T.); +#126296 = EDGE_CURVE('',#126289,#126297,#126299,.T.); +#126297 = VERTEX_POINT('',#126298); +#126298 = CARTESIAN_POINT('',(119.583333,-136.937266,1.585)); +#126299 = LINE('',#126300,#126301); +#126300 = CARTESIAN_POINT('',(119.586629,-136.960095,1.585)); +#126301 = VECTOR('',#126302,1.); +#126302 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#126303 = ORIENTED_EDGE('',*,*,#126304,.T.); +#126304 = EDGE_CURVE('',#126297,#126305,#126307,.T.); +#126305 = VERTEX_POINT('',#126306); +#126306 = CARTESIAN_POINT('',(119.585254,-136.384424,1.585)); +#126307 = LINE('',#126308,#126309); +#126308 = CARTESIAN_POINT('',(119.583333,-136.937266,1.585)); +#126309 = VECTOR('',#126310,1.); +#126310 = DIRECTION('',(3.474751200159E-03,0.999993963034,0.)); +#126311 = ORIENTED_EDGE('',*,*,#126312,.T.); +#126312 = EDGE_CURVE('',#126305,#126313,#126315,.T.); +#126313 = VERTEX_POINT('',#126314); +#126314 = CARTESIAN_POINT('',(119.59389,-136.359211,1.585)); +#126315 = LINE('',#126316,#126317); +#126316 = CARTESIAN_POINT('',(119.585254,-136.384424,1.585)); +#126317 = VECTOR('',#126318,1.); +#126318 = DIRECTION('',(0.32404035912,0.946043257817,0.)); +#126319 = ORIENTED_EDGE('',*,*,#126320,.T.); +#126320 = EDGE_CURVE('',#126313,#126321,#126323,.T.); +#126321 = VERTEX_POINT('',#126322); +#126322 = CARTESIAN_POINT('',(119.671,-136.209288,1.585)); +#126323 = LINE('',#126324,#126325); +#126324 = CARTESIAN_POINT('',(119.59389,-136.359211,1.585)); +#126325 = VECTOR('',#126326,1.); +#126326 = DIRECTION('',(0.457379642008,0.889271535065,0.)); +#126327 = ORIENTED_EDGE('',*,*,#126328,.T.); +#126328 = EDGE_CURVE('',#126321,#126109,#126329,.T.); +#126329 = LINE('',#126330,#126331); +#126330 = CARTESIAN_POINT('',(119.671,-136.209288,1.585)); +#126331 = VECTOR('',#126332,1.); +#126332 = DIRECTION('',(0.773012970294,0.634390217262,0.)); +#126333 = FACE_BOUND('',#126334,.F.); +#126334 = EDGE_LOOP('',(#126335,#126346,#126354,#126362,#126370,#126378) + ); +#126335 = ORIENTED_EDGE('',*,*,#126336,.T.); +#126336 = EDGE_CURVE('',#126337,#126339,#126341,.T.); +#126337 = VERTEX_POINT('',#126338); +#126338 = CARTESIAN_POINT('',(120.208797,-136.345135,1.585)); +#126339 = VERTEX_POINT('',#126340); +#126340 = CARTESIAN_POINT('',(119.824535,-136.345135,1.585)); +#126341 = CIRCLE('',#126342,0.34062122266); +#126342 = AXIS2_PLACEMENT_3D('',#126343,#126344,#126345); +#126343 = CARTESIAN_POINT('',(120.016666,-136.6263973262,1.585)); +#126344 = DIRECTION('',(0.,0.,1.)); +#126345 = DIRECTION('',(0.564060567041,0.825733417459,-0.)); +#126346 = ORIENTED_EDGE('',*,*,#126347,.T.); +#126347 = EDGE_CURVE('',#126339,#126348,#126350,.T.); +#126348 = VERTEX_POINT('',#126349); +#126349 = CARTESIAN_POINT('',(119.783333,-136.427541,1.585)); +#126350 = LINE('',#126351,#126352); +#126351 = CARTESIAN_POINT('',(119.824535,-136.345135,1.585)); +#126352 = VECTOR('',#126353,1.); +#126353 = DIRECTION('',(-0.44720491231,-0.894431532542,0.)); +#126354 = ORIENTED_EDGE('',*,*,#126355,.T.); +#126355 = EDGE_CURVE('',#126348,#126356,#126358,.T.); +#126356 = VERTEX_POINT('',#126357); +#126357 = CARTESIAN_POINT('',(119.783333,-136.548619,1.585)); +#126358 = LINE('',#126359,#126360); +#126359 = CARTESIAN_POINT('',(119.783333,-136.427541,1.585)); +#126360 = VECTOR('',#126361,1.); +#126361 = DIRECTION('',(0.,-1.,0.)); +#126362 = ORIENTED_EDGE('',*,*,#126363,.T.); +#126363 = EDGE_CURVE('',#126356,#126364,#126366,.T.); +#126364 = VERTEX_POINT('',#126365); +#126365 = CARTESIAN_POINT('',(120.25,-136.455285,1.585)); +#126366 = LINE('',#126367,#126368); +#126367 = CARTESIAN_POINT('',(119.783333,-136.548619,1.585)); +#126368 = VECTOR('',#126369,1.); +#126369 = DIRECTION('',(0.980580433239,0.196117347393,0.)); +#126370 = ORIENTED_EDGE('',*,*,#126371,.T.); +#126371 = EDGE_CURVE('',#126364,#126372,#126374,.T.); +#126372 = VERTEX_POINT('',#126373); +#126373 = CARTESIAN_POINT('',(120.25,-136.427541,1.585)); +#126374 = LINE('',#126375,#126376); +#126375 = CARTESIAN_POINT('',(120.25,-136.455285,1.585)); +#126376 = VECTOR('',#126377,1.); +#126377 = DIRECTION('',(0.,1.,0.)); +#126378 = ORIENTED_EDGE('',*,*,#126379,.T.); +#126379 = EDGE_CURVE('',#126372,#126337,#126380,.T.); +#126380 = LINE('',#126381,#126382); +#126381 = CARTESIAN_POINT('',(120.25,-136.427541,1.585)); +#126382 = VECTOR('',#126383,1.); +#126383 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#126384 = PLANE('',#126385); +#126385 = AXIS2_PLACEMENT_3D('',#126386,#126387,#126388); +#126386 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126387 = DIRECTION('',(0.,0.,1.)); +#126388 = DIRECTION('',(1.,0.,-0.)); +#126389 = SHELL_BASED_SURFACE_MODEL('',(#126390)); +#126390 = OPEN_SHELL('',(#126391)); +#126391 = ADVANCED_FACE('',(#126392,#126620),#126671,.T.); +#126392 = FACE_BOUND('',#126393,.F.); +#126393 = EDGE_LOOP('',(#126394,#126404,#126412,#126420,#126428,#126436, + #126444,#126452,#126460,#126469,#126477,#126485,#126493,#126501, + #126509,#126517,#126526,#126534,#126542,#126550,#126558,#126566, + #126574,#126582,#126590,#126598,#126606,#126614)); +#126394 = ORIENTED_EDGE('',*,*,#126395,.T.); +#126395 = EDGE_CURVE('',#126396,#126398,#126400,.T.); +#126396 = VERTEX_POINT('',#126397); +#126397 = CARTESIAN_POINT('',(122.905278,-136.181157,1.585)); +#126398 = VERTEX_POINT('',#126399); +#126399 = CARTESIAN_POINT('',(123.060503,-136.107229,1.585)); +#126400 = LINE('',#126401,#126402); +#126401 = CARTESIAN_POINT('',(122.905278,-136.181157,1.585)); +#126402 = VECTOR('',#126403,1.); +#126403 = DIRECTION('',(0.902834929812,0.429987313198,0.)); +#126404 = ORIENTED_EDGE('',*,*,#126405,.T.); +#126405 = EDGE_CURVE('',#126398,#126406,#126408,.T.); +#126406 = VERTEX_POINT('',#126407); +#126407 = CARTESIAN_POINT('',(123.083333,-136.103933,1.585)); +#126408 = LINE('',#126409,#126410); +#126409 = CARTESIAN_POINT('',(123.060503,-136.107229,1.585)); +#126410 = VECTOR('',#126411,1.); +#126411 = DIRECTION('',(0.989738577733,0.142889984765,0.)); +#126412 = ORIENTED_EDGE('',*,*,#126413,.T.); +#126413 = EDGE_CURVE('',#126406,#126414,#126416,.T.); +#126414 = VERTEX_POINT('',#126415); +#126415 = CARTESIAN_POINT('',(123.369509,-136.105854,1.585)); +#126416 = LINE('',#126417,#126418); +#126417 = CARTESIAN_POINT('',(123.083333,-136.103933,1.585)); +#126418 = VECTOR('',#126419,1.); +#126419 = DIRECTION('',(0.999977470911,-6.712501123787E-03,0.)); +#126420 = ORIENTED_EDGE('',*,*,#126421,.T.); +#126421 = EDGE_CURVE('',#126414,#126422,#126424,.T.); +#126422 = VERTEX_POINT('',#126423); +#126423 = CARTESIAN_POINT('',(123.394722,-136.11449,1.585)); +#126424 = LINE('',#126425,#126426); +#126425 = CARTESIAN_POINT('',(123.369509,-136.105854,1.585)); +#126426 = VECTOR('',#126427,1.); +#126427 = DIRECTION('',(0.946043257817,-0.32404035912,0.)); +#126428 = ORIENTED_EDGE('',*,*,#126429,.T.); +#126429 = EDGE_CURVE('',#126422,#126430,#126432,.T.); +#126430 = VERTEX_POINT('',#126431); +#126431 = CARTESIAN_POINT('',(123.544645,-136.1916,1.585)); +#126432 = LINE('',#126433,#126434); +#126433 = CARTESIAN_POINT('',(123.394722,-136.11449,1.585)); +#126434 = VECTOR('',#126435,1.); +#126435 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#126436 = ORIENTED_EDGE('',*,*,#126437,.T.); +#126437 = EDGE_CURVE('',#126430,#126438,#126440,.T.); +#126438 = VERTEX_POINT('',#126439); +#126439 = CARTESIAN_POINT('',(123.572776,-136.225878,1.585)); +#126440 = LINE('',#126441,#126442); +#126441 = CARTESIAN_POINT('',(123.544645,-136.1916,1.585)); +#126442 = VECTOR('',#126443,1.); +#126443 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#126444 = ORIENTED_EDGE('',*,*,#126445,.T.); +#126445 = EDGE_CURVE('',#126438,#126446,#126448,.T.); +#126446 = VERTEX_POINT('',#126447); +#126447 = CARTESIAN_POINT('',(123.646703,-136.381103,1.585)); +#126448 = LINE('',#126449,#126450); +#126449 = CARTESIAN_POINT('',(123.572776,-136.225878,1.585)); +#126450 = VECTOR('',#126451,1.); +#126451 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#126452 = ORIENTED_EDGE('',*,*,#126453,.T.); +#126453 = EDGE_CURVE('',#126446,#126454,#126456,.T.); +#126454 = VERTEX_POINT('',#126455); +#126455 = CARTESIAN_POINT('',(123.65,-136.537266,1.585)); +#126456 = LINE('',#126457,#126458); +#126457 = CARTESIAN_POINT('',(123.646703,-136.381103,1.585)); +#126458 = VECTOR('',#126459,1.); +#126459 = DIRECTION('',(2.110785168813E-02,-0.99977720448,0.)); +#126460 = ORIENTED_EDGE('',*,*,#126461,.T.); +#126461 = EDGE_CURVE('',#126454,#126462,#126464,.T.); +#126462 = VERTEX_POINT('',#126463); +#126463 = CARTESIAN_POINT('',(123.588365,-136.629614,1.585)); +#126464 = CIRCLE('',#126465,9.999927715323E-02); +#126465 = AXIS2_PLACEMENT_3D('',#126466,#126467,#126468); +#126466 = CARTESIAN_POINT('',(123.55000072284,-136.5372666249,1.585)); +#126467 = DIRECTION('',(0.,0.,-1.)); +#126468 = DIRECTION('',(0.99999999998,6.25002171439E-06,0.)); +#126469 = ORIENTED_EDGE('',*,*,#126470,.T.); +#126470 = EDGE_CURVE('',#126462,#126471,#126473,.T.); +#126471 = VERTEX_POINT('',#126472); +#126472 = CARTESIAN_POINT('',(122.983333,-136.75258,1.585)); +#126473 = LINE('',#126474,#126475); +#126474 = CARTESIAN_POINT('',(123.588365,-136.629614,1.585)); +#126475 = VECTOR('',#126476,1.); +#126476 = DIRECTION('',(-0.979965551748,-0.199167058992,0.)); +#126477 = ORIENTED_EDGE('',*,*,#126478,.T.); +#126478 = EDGE_CURVE('',#126471,#126479,#126481,.T.); +#126479 = VERTEX_POINT('',#126480); +#126480 = CARTESIAN_POINT('',(122.983333,-136.913659,1.585)); +#126481 = LINE('',#126482,#126483); +#126482 = CARTESIAN_POINT('',(122.983333,-136.75258,1.585)); +#126483 = VECTOR('',#126484,1.); +#126484 = DIRECTION('',(0.,-1.,0.)); +#126485 = ORIENTED_EDGE('',*,*,#126486,.T.); +#126486 = EDGE_CURVE('',#126479,#126487,#126489,.T.); +#126487 = VERTEX_POINT('',#126488); +#126488 = CARTESIAN_POINT('',(123.024535,-136.996064,1.585)); +#126489 = LINE('',#126490,#126491); +#126490 = CARTESIAN_POINT('',(122.983333,-136.913659,1.585)); +#126491 = VECTOR('',#126492,1.); +#126492 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#126493 = ORIENTED_EDGE('',*,*,#126494,.T.); +#126494 = EDGE_CURVE('',#126487,#126495,#126497,.T.); +#126495 = VERTEX_POINT('',#126496); +#126496 = CARTESIAN_POINT('',(123.10694,-137.037266,1.585)); +#126497 = LINE('',#126498,#126499); +#126498 = CARTESIAN_POINT('',(123.024535,-136.996064,1.585)); +#126499 = VECTOR('',#126500,1.); +#126500 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#126501 = ORIENTED_EDGE('',*,*,#126502,.T.); +#126502 = EDGE_CURVE('',#126495,#126503,#126505,.T.); +#126503 = VERTEX_POINT('',#126504); +#126504 = CARTESIAN_POINT('',(123.326393,-137.037266,1.585)); +#126505 = LINE('',#126506,#126507); +#126506 = CARTESIAN_POINT('',(123.10694,-137.037266,1.585)); +#126507 = VECTOR('',#126508,1.); +#126508 = DIRECTION('',(1.,0.,0.)); +#126509 = ORIENTED_EDGE('',*,*,#126510,.T.); +#126510 = EDGE_CURVE('',#126503,#126511,#126513,.T.); +#126511 = VERTEX_POINT('',#126512); +#126512 = CARTESIAN_POINT('',(123.456921,-136.974151,1.585)); +#126513 = LINE('',#126514,#126515); +#126514 = CARTESIAN_POINT('',(123.326393,-137.037266,1.585)); +#126515 = VECTOR('',#126516,1.); +#126516 = DIRECTION('',(0.900277418559,0.435316631469,0.)); +#126517 = ORIENTED_EDGE('',*,*,#126518,.T.); +#126518 = EDGE_CURVE('',#126511,#126519,#126521,.T.); +#126519 = VERTEX_POINT('',#126520); +#126520 = CARTESIAN_POINT('',(123.544645,-137.1496,1.585)); +#126521 = CIRCLE('',#126522,0.100000294132); +#126522 = AXIS2_PLACEMENT_3D('',#126523,#126524,#126525); +#126523 = CARTESIAN_POINT('',(123.48333371921,-137.0706000906,1.585)); +#126524 = DIRECTION('',(0.,0.,-1.)); +#126525 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#126526 = ORIENTED_EDGE('',*,*,#126527,.T.); +#126527 = EDGE_CURVE('',#126519,#126528,#126530,.T.); +#126528 = VERTEX_POINT('',#126529); +#126529 = CARTESIAN_POINT('',(123.376413,-137.233715,1.585)); +#126530 = LINE('',#126531,#126532); +#126531 = CARTESIAN_POINT('',(123.544645,-137.1496,1.585)); +#126532 = VECTOR('',#126533,1.); +#126533 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#126534 = ORIENTED_EDGE('',*,*,#126535,.T.); +#126535 = EDGE_CURVE('',#126528,#126536,#126538,.T.); +#126536 = VERTEX_POINT('',#126537); +#126537 = CARTESIAN_POINT('',(123.35,-137.237266,1.585)); +#126538 = LINE('',#126539,#126540); +#126539 = CARTESIAN_POINT('',(123.376413,-137.233715,1.585)); +#126540 = VECTOR('',#126541,1.); +#126541 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#126542 = ORIENTED_EDGE('',*,*,#126543,.T.); +#126543 = EDGE_CURVE('',#126536,#126544,#126546,.T.); +#126544 = VERTEX_POINT('',#126545); +#126545 = CARTESIAN_POINT('',(123.063824,-137.235345,1.585)); +#126546 = LINE('',#126547,#126548); +#126547 = CARTESIAN_POINT('',(123.35,-137.237266,1.585)); +#126548 = VECTOR('',#126549,1.); +#126549 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#126550 = ORIENTED_EDGE('',*,*,#126551,.T.); +#126551 = EDGE_CURVE('',#126544,#126552,#126554,.T.); +#126552 = VERTEX_POINT('',#126553); +#126553 = CARTESIAN_POINT('',(123.038612,-137.226709,1.585)); +#126554 = LINE('',#126555,#126556); +#126555 = CARTESIAN_POINT('',(123.063824,-137.235345,1.585)); +#126556 = VECTOR('',#126557,1.); +#126557 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#126558 = ORIENTED_EDGE('',*,*,#126559,.T.); +#126559 = EDGE_CURVE('',#126552,#126560,#126562,.T.); +#126560 = VERTEX_POINT('',#126561); +#126561 = CARTESIAN_POINT('',(122.888689,-137.1496,1.585)); +#126562 = LINE('',#126563,#126564); +#126563 = CARTESIAN_POINT('',(123.038612,-137.226709,1.585)); +#126564 = VECTOR('',#126565,1.); +#126565 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#126566 = ORIENTED_EDGE('',*,*,#126567,.T.); +#126567 = EDGE_CURVE('',#126560,#126568,#126570,.T.); +#126568 = VERTEX_POINT('',#126569); +#126569 = CARTESIAN_POINT('',(122.860557,-137.115321,1.585)); +#126570 = LINE('',#126571,#126572); +#126571 = CARTESIAN_POINT('',(122.888689,-137.1496,1.585)); +#126572 = VECTOR('',#126573,1.); +#126573 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#126574 = ORIENTED_EDGE('',*,*,#126575,.T.); +#126575 = EDGE_CURVE('',#126568,#126576,#126578,.T.); +#126576 = VERTEX_POINT('',#126577); +#126577 = CARTESIAN_POINT('',(122.786629,-136.960095,1.585)); +#126578 = LINE('',#126579,#126580); +#126579 = CARTESIAN_POINT('',(122.860557,-137.115321,1.585)); +#126580 = VECTOR('',#126581,1.); +#126581 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#126582 = ORIENTED_EDGE('',*,*,#126583,.T.); +#126583 = EDGE_CURVE('',#126576,#126584,#126586,.T.); +#126584 = VERTEX_POINT('',#126585); +#126585 = CARTESIAN_POINT('',(122.783333,-136.937266,1.585)); +#126586 = LINE('',#126587,#126588); +#126587 = CARTESIAN_POINT('',(122.786629,-136.960095,1.585)); +#126588 = VECTOR('',#126589,1.); +#126589 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#126590 = ORIENTED_EDGE('',*,*,#126591,.T.); +#126591 = EDGE_CURVE('',#126584,#126592,#126594,.T.); +#126592 = VERTEX_POINT('',#126593); +#126593 = CARTESIAN_POINT('',(122.785254,-136.384424,1.585)); +#126594 = LINE('',#126595,#126596); +#126595 = CARTESIAN_POINT('',(122.783333,-136.937266,1.585)); +#126596 = VECTOR('',#126597,1.); +#126597 = DIRECTION('',(3.474751200133E-03,0.999993963034,0.)); +#126598 = ORIENTED_EDGE('',*,*,#126599,.T.); +#126599 = EDGE_CURVE('',#126592,#126600,#126602,.T.); +#126600 = VERTEX_POINT('',#126601); +#126601 = CARTESIAN_POINT('',(122.79389,-136.359211,1.585)); +#126602 = LINE('',#126603,#126604); +#126603 = CARTESIAN_POINT('',(122.785254,-136.384424,1.585)); +#126604 = VECTOR('',#126605,1.); +#126605 = DIRECTION('',(0.324040359121,0.946043257817,0.)); +#126606 = ORIENTED_EDGE('',*,*,#126607,.T.); +#126607 = EDGE_CURVE('',#126600,#126608,#126610,.T.); +#126608 = VERTEX_POINT('',#126609); +#126609 = CARTESIAN_POINT('',(122.871,-136.209288,1.585)); +#126610 = LINE('',#126611,#126612); +#126611 = CARTESIAN_POINT('',(122.79389,-136.359211,1.585)); +#126612 = VECTOR('',#126613,1.); +#126613 = DIRECTION('',(0.457379642008,0.889271535065,0.)); +#126614 = ORIENTED_EDGE('',*,*,#126615,.T.); +#126615 = EDGE_CURVE('',#126608,#126396,#126616,.T.); +#126616 = LINE('',#126617,#126618); +#126617 = CARTESIAN_POINT('',(122.871,-136.209288,1.585)); +#126618 = VECTOR('',#126619,1.); +#126619 = DIRECTION('',(0.773012970294,0.634390217262,0.)); +#126620 = FACE_BOUND('',#126621,.F.); +#126621 = EDGE_LOOP('',(#126622,#126633,#126641,#126649,#126657,#126665) + ); +#126622 = ORIENTED_EDGE('',*,*,#126623,.T.); +#126623 = EDGE_CURVE('',#126624,#126626,#126628,.T.); +#126624 = VERTEX_POINT('',#126625); +#126625 = CARTESIAN_POINT('',(123.408797,-136.345135,1.585)); +#126626 = VERTEX_POINT('',#126627); +#126627 = CARTESIAN_POINT('',(123.024535,-136.345135,1.585)); +#126628 = CIRCLE('',#126629,0.34062122266); +#126629 = AXIS2_PLACEMENT_3D('',#126630,#126631,#126632); +#126630 = CARTESIAN_POINT('',(123.216666,-136.6263973262,1.585)); +#126631 = DIRECTION('',(0.,0.,1.)); +#126632 = DIRECTION('',(0.564060567041,0.825733417459,-0.)); +#126633 = ORIENTED_EDGE('',*,*,#126634,.T.); +#126634 = EDGE_CURVE('',#126626,#126635,#126637,.T.); +#126635 = VERTEX_POINT('',#126636); +#126636 = CARTESIAN_POINT('',(122.983333,-136.427541,1.585)); +#126637 = LINE('',#126638,#126639); +#126638 = CARTESIAN_POINT('',(123.024535,-136.345135,1.585)); +#126639 = VECTOR('',#126640,1.); +#126640 = DIRECTION('',(-0.44720491231,-0.894431532542,0.)); +#126641 = ORIENTED_EDGE('',*,*,#126642,.T.); +#126642 = EDGE_CURVE('',#126635,#126643,#126645,.T.); +#126643 = VERTEX_POINT('',#126644); +#126644 = CARTESIAN_POINT('',(122.983333,-136.548619,1.585)); +#126645 = LINE('',#126646,#126647); +#126646 = CARTESIAN_POINT('',(122.983333,-136.427541,1.585)); +#126647 = VECTOR('',#126648,1.); +#126648 = DIRECTION('',(0.,-1.,0.)); +#126649 = ORIENTED_EDGE('',*,*,#126650,.T.); +#126650 = EDGE_CURVE('',#126643,#126651,#126653,.T.); +#126651 = VERTEX_POINT('',#126652); +#126652 = CARTESIAN_POINT('',(123.45,-136.455285,1.585)); +#126653 = LINE('',#126654,#126655); +#126654 = CARTESIAN_POINT('',(122.983333,-136.548619,1.585)); +#126655 = VECTOR('',#126656,1.); +#126656 = DIRECTION('',(0.980580433239,0.196117347393,0.)); +#126657 = ORIENTED_EDGE('',*,*,#126658,.T.); +#126658 = EDGE_CURVE('',#126651,#126659,#126661,.T.); +#126659 = VERTEX_POINT('',#126660); +#126660 = CARTESIAN_POINT('',(123.45,-136.427541,1.585)); +#126661 = LINE('',#126662,#126663); +#126662 = CARTESIAN_POINT('',(123.45,-136.455285,1.585)); +#126663 = VECTOR('',#126664,1.); +#126664 = DIRECTION('',(0.,1.,0.)); +#126665 = ORIENTED_EDGE('',*,*,#126666,.T.); +#126666 = EDGE_CURVE('',#126659,#126624,#126667,.T.); +#126667 = LINE('',#126668,#126669); +#126668 = CARTESIAN_POINT('',(123.45,-136.427541,1.585)); +#126669 = VECTOR('',#126670,1.); +#126670 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#126671 = PLANE('',#126672); +#126672 = AXIS2_PLACEMENT_3D('',#126673,#126674,#126675); +#126673 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126674 = DIRECTION('',(0.,0.,1.)); +#126675 = DIRECTION('',(1.,0.,-0.)); +#126676 = SHELL_BASED_SURFACE_MODEL('',(#126677)); +#126677 = OPEN_SHELL('',(#126678)); +#126678 = ADVANCED_FACE('',(#126679,#126907),#126958,.T.); +#126679 = FACE_BOUND('',#126680,.F.); +#126680 = EDGE_LOOP('',(#126681,#126691,#126699,#126707,#126715,#126723, + #126731,#126739,#126747,#126756,#126764,#126772,#126780,#126788, + #126796,#126804,#126813,#126821,#126829,#126837,#126845,#126853, + #126861,#126869,#126877,#126885,#126893,#126901)); +#126681 = ORIENTED_EDGE('',*,*,#126682,.T.); +#126682 = EDGE_CURVE('',#126683,#126685,#126687,.T.); +#126683 = VERTEX_POINT('',#126684); +#126684 = CARTESIAN_POINT('',(126.838612,-136.181157,1.585)); +#126685 = VERTEX_POINT('',#126686); +#126686 = CARTESIAN_POINT('',(126.993837,-136.107229,1.585)); +#126687 = LINE('',#126688,#126689); +#126688 = CARTESIAN_POINT('',(126.838612,-136.181157,1.585)); +#126689 = VECTOR('',#126690,1.); +#126690 = DIRECTION('',(0.902834929812,0.429987313198,0.)); +#126691 = ORIENTED_EDGE('',*,*,#126692,.T.); +#126692 = EDGE_CURVE('',#126685,#126693,#126695,.T.); +#126693 = VERTEX_POINT('',#126694); +#126694 = CARTESIAN_POINT('',(127.016667,-136.103933,1.585)); +#126695 = LINE('',#126696,#126697); +#126696 = CARTESIAN_POINT('',(126.993837,-136.107229,1.585)); +#126697 = VECTOR('',#126698,1.); +#126698 = DIRECTION('',(0.989738577733,0.142889984765,0.)); +#126699 = ORIENTED_EDGE('',*,*,#126700,.T.); +#126700 = EDGE_CURVE('',#126693,#126701,#126703,.T.); +#126701 = VERTEX_POINT('',#126702); +#126702 = CARTESIAN_POINT('',(127.302843,-136.105854,1.585)); +#126703 = LINE('',#126704,#126705); +#126704 = CARTESIAN_POINT('',(127.016667,-136.103933,1.585)); +#126705 = VECTOR('',#126706,1.); +#126706 = DIRECTION('',(0.999977470911,-6.712501123787E-03,0.)); +#126707 = ORIENTED_EDGE('',*,*,#126708,.T.); +#126708 = EDGE_CURVE('',#126701,#126709,#126711,.T.); +#126709 = VERTEX_POINT('',#126710); +#126710 = CARTESIAN_POINT('',(127.328056,-136.11449,1.585)); +#126711 = LINE('',#126712,#126713); +#126712 = CARTESIAN_POINT('',(127.302843,-136.105854,1.585)); +#126713 = VECTOR('',#126714,1.); +#126714 = DIRECTION('',(0.946043257817,-0.32404035912,0.)); +#126715 = ORIENTED_EDGE('',*,*,#126716,.T.); +#126716 = EDGE_CURVE('',#126709,#126717,#126719,.T.); +#126717 = VERTEX_POINT('',#126718); +#126718 = CARTESIAN_POINT('',(127.477979,-136.1916,1.585)); +#126719 = LINE('',#126720,#126721); +#126720 = CARTESIAN_POINT('',(127.328056,-136.11449,1.585)); +#126721 = VECTOR('',#126722,1.); +#126722 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#126723 = ORIENTED_EDGE('',*,*,#126724,.T.); +#126724 = EDGE_CURVE('',#126717,#126725,#126727,.T.); +#126725 = VERTEX_POINT('',#126726); +#126726 = CARTESIAN_POINT('',(127.50611,-136.225878,1.585)); +#126727 = LINE('',#126728,#126729); +#126728 = CARTESIAN_POINT('',(127.477979,-136.1916,1.585)); +#126729 = VECTOR('',#126730,1.); +#126730 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#126731 = ORIENTED_EDGE('',*,*,#126732,.T.); +#126732 = EDGE_CURVE('',#126725,#126733,#126735,.T.); +#126733 = VERTEX_POINT('',#126734); +#126734 = CARTESIAN_POINT('',(127.580037,-136.381103,1.585)); +#126735 = LINE('',#126736,#126737); +#126736 = CARTESIAN_POINT('',(127.50611,-136.225878,1.585)); +#126737 = VECTOR('',#126738,1.); +#126738 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#126739 = ORIENTED_EDGE('',*,*,#126740,.T.); +#126740 = EDGE_CURVE('',#126733,#126741,#126743,.T.); +#126741 = VERTEX_POINT('',#126742); +#126742 = CARTESIAN_POINT('',(127.583334,-136.537266,1.585)); +#126743 = LINE('',#126744,#126745); +#126744 = CARTESIAN_POINT('',(127.580037,-136.381103,1.585)); +#126745 = VECTOR('',#126746,1.); +#126746 = DIRECTION('',(2.110785168804E-02,-0.99977720448,0.)); +#126747 = ORIENTED_EDGE('',*,*,#126748,.T.); +#126748 = EDGE_CURVE('',#126741,#126749,#126751,.T.); +#126749 = VERTEX_POINT('',#126750); +#126750 = CARTESIAN_POINT('',(127.521699,-136.629614,1.585)); +#126751 = CIRCLE('',#126752,9.999927715317E-02); +#126752 = AXIS2_PLACEMENT_3D('',#126753,#126754,#126755); +#126753 = CARTESIAN_POINT('',(127.48333472284,-136.5372666249,1.585)); +#126754 = DIRECTION('',(0.,0.,-1.)); +#126755 = DIRECTION('',(0.99999999998,6.250021998613E-06,0.)); +#126756 = ORIENTED_EDGE('',*,*,#126757,.T.); +#126757 = EDGE_CURVE('',#126749,#126758,#126760,.T.); +#126758 = VERTEX_POINT('',#126759); +#126759 = CARTESIAN_POINT('',(126.916667,-136.75258,1.585)); +#126760 = LINE('',#126761,#126762); +#126761 = CARTESIAN_POINT('',(127.521699,-136.629614,1.585)); +#126762 = VECTOR('',#126763,1.); +#126763 = DIRECTION('',(-0.979965551748,-0.199167058992,0.)); +#126764 = ORIENTED_EDGE('',*,*,#126765,.T.); +#126765 = EDGE_CURVE('',#126758,#126766,#126768,.T.); +#126766 = VERTEX_POINT('',#126767); +#126767 = CARTESIAN_POINT('',(126.916667,-136.913659,1.585)); +#126768 = LINE('',#126769,#126770); +#126769 = CARTESIAN_POINT('',(126.916667,-136.75258,1.585)); +#126770 = VECTOR('',#126771,1.); +#126771 = DIRECTION('',(0.,-1.,0.)); +#126772 = ORIENTED_EDGE('',*,*,#126773,.T.); +#126773 = EDGE_CURVE('',#126766,#126774,#126776,.T.); +#126774 = VERTEX_POINT('',#126775); +#126775 = CARTESIAN_POINT('',(126.957869,-136.996064,1.585)); +#126776 = LINE('',#126777,#126778); +#126777 = CARTESIAN_POINT('',(126.916667,-136.913659,1.585)); +#126778 = VECTOR('',#126779,1.); +#126779 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#126780 = ORIENTED_EDGE('',*,*,#126781,.T.); +#126781 = EDGE_CURVE('',#126774,#126782,#126784,.T.); +#126782 = VERTEX_POINT('',#126783); +#126783 = CARTESIAN_POINT('',(127.040274,-137.037266,1.585)); +#126784 = LINE('',#126785,#126786); +#126785 = CARTESIAN_POINT('',(126.957869,-136.996064,1.585)); +#126786 = VECTOR('',#126787,1.); +#126787 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#126788 = ORIENTED_EDGE('',*,*,#126789,.T.); +#126789 = EDGE_CURVE('',#126782,#126790,#126792,.T.); +#126790 = VERTEX_POINT('',#126791); +#126791 = CARTESIAN_POINT('',(127.259727,-137.037266,1.585)); +#126792 = LINE('',#126793,#126794); +#126793 = CARTESIAN_POINT('',(127.040274,-137.037266,1.585)); +#126794 = VECTOR('',#126795,1.); +#126795 = DIRECTION('',(1.,0.,0.)); +#126796 = ORIENTED_EDGE('',*,*,#126797,.T.); +#126797 = EDGE_CURVE('',#126790,#126798,#126800,.T.); +#126798 = VERTEX_POINT('',#126799); +#126799 = CARTESIAN_POINT('',(127.390255,-136.974151,1.585)); +#126800 = LINE('',#126801,#126802); +#126801 = CARTESIAN_POINT('',(127.259727,-137.037266,1.585)); +#126802 = VECTOR('',#126803,1.); +#126803 = DIRECTION('',(0.900277418559,0.435316631469,0.)); +#126804 = ORIENTED_EDGE('',*,*,#126805,.T.); +#126805 = EDGE_CURVE('',#126798,#126806,#126808,.T.); +#126806 = VERTEX_POINT('',#126807); +#126807 = CARTESIAN_POINT('',(127.477979,-137.1496,1.585)); +#126808 = CIRCLE('',#126809,0.100000294132); +#126809 = AXIS2_PLACEMENT_3D('',#126810,#126811,#126812); +#126810 = CARTESIAN_POINT('',(127.41666771921,-137.0706000906,1.585)); +#126811 = DIRECTION('',(0.,0.,-1.)); +#126812 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#126813 = ORIENTED_EDGE('',*,*,#126814,.T.); +#126814 = EDGE_CURVE('',#126806,#126815,#126817,.T.); +#126815 = VERTEX_POINT('',#126816); +#126816 = CARTESIAN_POINT('',(127.309747,-137.233715,1.585)); +#126817 = LINE('',#126818,#126819); +#126818 = CARTESIAN_POINT('',(127.477979,-137.1496,1.585)); +#126819 = VECTOR('',#126820,1.); +#126820 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#126821 = ORIENTED_EDGE('',*,*,#126822,.T.); +#126822 = EDGE_CURVE('',#126815,#126823,#126825,.T.); +#126823 = VERTEX_POINT('',#126824); +#126824 = CARTESIAN_POINT('',(127.283334,-137.237266,1.585)); +#126825 = LINE('',#126826,#126827); +#126826 = CARTESIAN_POINT('',(127.309747,-137.233715,1.585)); +#126827 = VECTOR('',#126828,1.); +#126828 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#126829 = ORIENTED_EDGE('',*,*,#126830,.T.); +#126830 = EDGE_CURVE('',#126823,#126831,#126833,.T.); +#126831 = VERTEX_POINT('',#126832); +#126832 = CARTESIAN_POINT('',(126.997158,-137.235345,1.585)); +#126833 = LINE('',#126834,#126835); +#126834 = CARTESIAN_POINT('',(127.283334,-137.237266,1.585)); +#126835 = VECTOR('',#126836,1.); +#126836 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#126837 = ORIENTED_EDGE('',*,*,#126838,.T.); +#126838 = EDGE_CURVE('',#126831,#126839,#126841,.T.); +#126839 = VERTEX_POINT('',#126840); +#126840 = CARTESIAN_POINT('',(126.971946,-137.226709,1.585)); +#126841 = LINE('',#126842,#126843); +#126842 = CARTESIAN_POINT('',(126.997158,-137.235345,1.585)); +#126843 = VECTOR('',#126844,1.); +#126844 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#126845 = ORIENTED_EDGE('',*,*,#126846,.T.); +#126846 = EDGE_CURVE('',#126839,#126847,#126849,.T.); +#126847 = VERTEX_POINT('',#126848); +#126848 = CARTESIAN_POINT('',(126.822023,-137.1496,1.585)); +#126849 = LINE('',#126850,#126851); +#126850 = CARTESIAN_POINT('',(126.971946,-137.226709,1.585)); +#126851 = VECTOR('',#126852,1.); +#126852 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#126853 = ORIENTED_EDGE('',*,*,#126854,.T.); +#126854 = EDGE_CURVE('',#126847,#126855,#126857,.T.); +#126855 = VERTEX_POINT('',#126856); +#126856 = CARTESIAN_POINT('',(126.793891,-137.115321,1.585)); +#126857 = LINE('',#126858,#126859); +#126858 = CARTESIAN_POINT('',(126.822023,-137.1496,1.585)); +#126859 = VECTOR('',#126860,1.); +#126860 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#126861 = ORIENTED_EDGE('',*,*,#126862,.T.); +#126862 = EDGE_CURVE('',#126855,#126863,#126865,.T.); +#126863 = VERTEX_POINT('',#126864); +#126864 = CARTESIAN_POINT('',(126.719963,-136.960095,1.585)); +#126865 = LINE('',#126866,#126867); +#126866 = CARTESIAN_POINT('',(126.793891,-137.115321,1.585)); +#126867 = VECTOR('',#126868,1.); +#126868 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#126869 = ORIENTED_EDGE('',*,*,#126870,.T.); +#126870 = EDGE_CURVE('',#126863,#126871,#126873,.T.); +#126871 = VERTEX_POINT('',#126872); +#126872 = CARTESIAN_POINT('',(126.716667,-136.937266,1.585)); +#126873 = LINE('',#126874,#126875); +#126874 = CARTESIAN_POINT('',(126.719963,-136.960095,1.585)); +#126875 = VECTOR('',#126876,1.); +#126876 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#126877 = ORIENTED_EDGE('',*,*,#126878,.T.); +#126878 = EDGE_CURVE('',#126871,#126879,#126881,.T.); +#126879 = VERTEX_POINT('',#126880); +#126880 = CARTESIAN_POINT('',(126.718588,-136.384424,1.585)); +#126881 = LINE('',#126882,#126883); +#126882 = CARTESIAN_POINT('',(126.716667,-136.937266,1.585)); +#126883 = VECTOR('',#126884,1.); +#126884 = DIRECTION('',(3.474751200133E-03,0.999993963034,0.)); +#126885 = ORIENTED_EDGE('',*,*,#126886,.T.); +#126886 = EDGE_CURVE('',#126879,#126887,#126889,.T.); +#126887 = VERTEX_POINT('',#126888); +#126888 = CARTESIAN_POINT('',(126.727224,-136.359211,1.585)); +#126889 = LINE('',#126890,#126891); +#126890 = CARTESIAN_POINT('',(126.718588,-136.384424,1.585)); +#126891 = VECTOR('',#126892,1.); +#126892 = DIRECTION('',(0.324040359121,0.946043257817,0.)); +#126893 = ORIENTED_EDGE('',*,*,#126894,.T.); +#126894 = EDGE_CURVE('',#126887,#126895,#126897,.T.); +#126895 = VERTEX_POINT('',#126896); +#126896 = CARTESIAN_POINT('',(126.804334,-136.209288,1.585)); +#126897 = LINE('',#126898,#126899); +#126898 = CARTESIAN_POINT('',(126.727224,-136.359211,1.585)); +#126899 = VECTOR('',#126900,1.); +#126900 = DIRECTION('',(0.457379642008,0.889271535065,0.)); +#126901 = ORIENTED_EDGE('',*,*,#126902,.T.); +#126902 = EDGE_CURVE('',#126895,#126683,#126903,.T.); +#126903 = LINE('',#126904,#126905); +#126904 = CARTESIAN_POINT('',(126.804334,-136.209288,1.585)); +#126905 = VECTOR('',#126906,1.); +#126906 = DIRECTION('',(0.773012970294,0.634390217262,0.)); +#126907 = FACE_BOUND('',#126908,.F.); +#126908 = EDGE_LOOP('',(#126909,#126920,#126928,#126936,#126944,#126952) + ); +#126909 = ORIENTED_EDGE('',*,*,#126910,.T.); +#126910 = EDGE_CURVE('',#126911,#126913,#126915,.T.); +#126911 = VERTEX_POINT('',#126912); +#126912 = CARTESIAN_POINT('',(127.342131,-136.345135,1.585)); +#126913 = VERTEX_POINT('',#126914); +#126914 = CARTESIAN_POINT('',(126.957869,-136.345135,1.585)); +#126915 = CIRCLE('',#126916,0.34062122266); +#126916 = AXIS2_PLACEMENT_3D('',#126917,#126918,#126919); +#126917 = CARTESIAN_POINT('',(127.15,-136.6263973262,1.585)); +#126918 = DIRECTION('',(0.,0.,1.)); +#126919 = DIRECTION('',(0.564060567041,0.825733417459,-0.)); +#126920 = ORIENTED_EDGE('',*,*,#126921,.T.); +#126921 = EDGE_CURVE('',#126913,#126922,#126924,.T.); +#126922 = VERTEX_POINT('',#126923); +#126923 = CARTESIAN_POINT('',(126.916667,-136.427541,1.585)); +#126924 = LINE('',#126925,#126926); +#126925 = CARTESIAN_POINT('',(126.957869,-136.345135,1.585)); +#126926 = VECTOR('',#126927,1.); +#126927 = DIRECTION('',(-0.44720491231,-0.894431532542,0.)); +#126928 = ORIENTED_EDGE('',*,*,#126929,.T.); +#126929 = EDGE_CURVE('',#126922,#126930,#126932,.T.); +#126930 = VERTEX_POINT('',#126931); +#126931 = CARTESIAN_POINT('',(126.916667,-136.548619,1.585)); +#126932 = LINE('',#126933,#126934); +#126933 = CARTESIAN_POINT('',(126.916667,-136.427541,1.585)); +#126934 = VECTOR('',#126935,1.); +#126935 = DIRECTION('',(0.,-1.,0.)); +#126936 = ORIENTED_EDGE('',*,*,#126937,.T.); +#126937 = EDGE_CURVE('',#126930,#126938,#126940,.T.); +#126938 = VERTEX_POINT('',#126939); +#126939 = CARTESIAN_POINT('',(127.383334,-136.455285,1.585)); +#126940 = LINE('',#126941,#126942); +#126941 = CARTESIAN_POINT('',(126.916667,-136.548619,1.585)); +#126942 = VECTOR('',#126943,1.); +#126943 = DIRECTION('',(0.980580433239,0.196117347393,0.)); +#126944 = ORIENTED_EDGE('',*,*,#126945,.T.); +#126945 = EDGE_CURVE('',#126938,#126946,#126948,.T.); +#126946 = VERTEX_POINT('',#126947); +#126947 = CARTESIAN_POINT('',(127.383334,-136.427541,1.585)); +#126948 = LINE('',#126949,#126950); +#126949 = CARTESIAN_POINT('',(127.383334,-136.455285,1.585)); +#126950 = VECTOR('',#126951,1.); +#126951 = DIRECTION('',(0.,1.,0.)); +#126952 = ORIENTED_EDGE('',*,*,#126953,.T.); +#126953 = EDGE_CURVE('',#126946,#126911,#126954,.T.); +#126954 = LINE('',#126955,#126956); +#126955 = CARTESIAN_POINT('',(127.383334,-136.427541,1.585)); +#126956 = VECTOR('',#126957,1.); +#126957 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#126958 = PLANE('',#126959); +#126959 = AXIS2_PLACEMENT_3D('',#126960,#126961,#126962); +#126960 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126961 = DIRECTION('',(0.,0.,1.)); +#126962 = DIRECTION('',(1.,0.,-0.)); +#126963 = SHELL_BASED_SURFACE_MODEL('',(#126964)); +#126964 = OPEN_SHELL('',(#126965)); +#126965 = ADVANCED_FACE('',(#126966),#127180,.T.); +#126966 = FACE_BOUND('',#126967,.F.); +#126967 = EDGE_LOOP('',(#126968,#126978,#126986,#126994,#127002,#127010, + #127019,#127027,#127035,#127044,#127052,#127061,#127069,#127077, + #127086,#127094,#127102,#127110,#127118,#127126,#127134,#127142, + #127150,#127158,#127166,#127174)); +#126968 = ORIENTED_EDGE('',*,*,#126969,.T.); +#126969 = EDGE_CURVE('',#126970,#126972,#126974,.T.); +#126970 = VERTEX_POINT('',#126971); +#126971 = CARTESIAN_POINT('',(128.096884,-136.186441,1.585)); +#126972 = VERTEX_POINT('',#126973); +#126973 = CARTESIAN_POINT('',(128.256921,-136.107484,1.585)); +#126974 = LINE('',#126975,#126976); +#126975 = CARTESIAN_POINT('',(128.096884,-136.186441,1.585)); +#126976 = VECTOR('',#126977,1.); +#126977 = DIRECTION('',(0.89679384866,0.442448633183,0.)); +#126978 = ORIENTED_EDGE('',*,*,#126979,.T.); +#126979 = EDGE_CURVE('',#126972,#126980,#126982,.T.); +#126980 = VERTEX_POINT('',#126981); +#126981 = CARTESIAN_POINT('',(128.283334,-136.103933,1.585)); +#126982 = LINE('',#126983,#126984); +#126983 = CARTESIAN_POINT('',(128.256921,-136.107484,1.585)); +#126984 = VECTOR('',#126985,1.); +#126985 = DIRECTION('',(0.991083449634,0.133242620287,0.)); +#126986 = ORIENTED_EDGE('',*,*,#126987,.T.); +#126987 = EDGE_CURVE('',#126980,#126988,#126990,.T.); +#126988 = VERTEX_POINT('',#126989); +#126989 = CARTESIAN_POINT('',(128.56951,-136.105854,1.585)); +#126990 = LINE('',#126991,#126992); +#126991 = CARTESIAN_POINT('',(128.283334,-136.103933,1.585)); +#126992 = VECTOR('',#126993,1.); +#126993 = DIRECTION('',(0.999977470911,-6.712501123786E-03,0.)); +#126994 = ORIENTED_EDGE('',*,*,#126995,.T.); +#126995 = EDGE_CURVE('',#126988,#126996,#126998,.T.); +#126996 = VERTEX_POINT('',#126997); +#126997 = CARTESIAN_POINT('',(128.594723,-136.11449,1.585)); +#126998 = LINE('',#126999,#127000); +#126999 = CARTESIAN_POINT('',(128.56951,-136.105854,1.585)); +#127000 = VECTOR('',#127001,1.); +#127001 = DIRECTION('',(0.946043257817,-0.324040359121,0.)); +#127002 = ORIENTED_EDGE('',*,*,#127003,.T.); +#127003 = EDGE_CURVE('',#126996,#127004,#127006,.T.); +#127004 = VERTEX_POINT('',#127005); +#127005 = CARTESIAN_POINT('',(128.744646,-136.1916,1.585)); +#127006 = LINE('',#127007,#127008); +#127007 = CARTESIAN_POINT('',(128.594723,-136.11449,1.585)); +#127008 = VECTOR('',#127009,1.); +#127009 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#127010 = ORIENTED_EDGE('',*,*,#127011,.T.); +#127011 = EDGE_CURVE('',#127004,#127012,#127014,.T.); +#127012 = VERTEX_POINT('',#127013); +#127013 = CARTESIAN_POINT('',(128.656921,-136.367049,1.585)); +#127014 = CIRCLE('',#127015,0.100000622057); +#127015 = AXIS2_PLACEMENT_3D('',#127016,#127017,#127018); +#127016 = CARTESIAN_POINT('',(128.68333376103,-136.2705995807,1.585)); +#127017 = DIRECTION('',(0.,0.,-1.)); +#127018 = DIRECTION('',(0.613118575722,0.789990893684,0.)); +#127019 = ORIENTED_EDGE('',*,*,#127020,.T.); +#127020 = EDGE_CURVE('',#127012,#127021,#127023,.T.); +#127021 = VERTEX_POINT('',#127022); +#127022 = CARTESIAN_POINT('',(128.526393,-136.303933,1.585)); +#127023 = LINE('',#127024,#127025); +#127024 = CARTESIAN_POINT('',(128.656921,-136.367049,1.585)); +#127025 = VECTOR('',#127026,1.); +#127026 = DIRECTION('',(-0.900274715498,0.435322221618,0.)); +#127027 = ORIENTED_EDGE('',*,*,#127028,.T.); +#127028 = EDGE_CURVE('',#127021,#127029,#127031,.T.); +#127029 = VERTEX_POINT('',#127030); +#127030 = CARTESIAN_POINT('',(128.306942,-136.303933,1.585)); +#127031 = LINE('',#127032,#127033); +#127032 = CARTESIAN_POINT('',(128.526393,-136.303933,1.585)); +#127033 = VECTOR('',#127034,1.); +#127034 = DIRECTION('',(-1.,0.,0.)); +#127035 = ORIENTED_EDGE('',*,*,#127036,.T.); +#127036 = EDGE_CURVE('',#127029,#127037,#127039,.T.); +#127037 = VERTEX_POINT('',#127038); +#127038 = CARTESIAN_POINT('',(128.116667,-136.494207,1.585)); +#127039 = CIRCLE('',#127040,0.267248556225); +#127040 = AXIS2_PLACEMENT_3D('',#127041,#127042,#127043); +#127041 = CARTESIAN_POINT('',(128.37508235812,-136.5623487162,1.585)); +#127042 = DIRECTION('',(0.,0.,1.)); +#127043 = DIRECTION('',(-0.254969976573,0.966948970239,0.)); +#127044 = ORIENTED_EDGE('',*,*,#127045,.T.); +#127045 = EDGE_CURVE('',#127037,#127046,#127048,.T.); +#127046 = VERTEX_POINT('',#127047); +#127047 = CARTESIAN_POINT('',(128.116667,-136.846991,1.585)); +#127048 = LINE('',#127049,#127050); +#127049 = CARTESIAN_POINT('',(128.116667,-136.494207,1.585)); +#127050 = VECTOR('',#127051,1.); +#127051 = DIRECTION('',(0.,-1.,0.)); +#127052 = ORIENTED_EDGE('',*,*,#127053,.T.); +#127053 = EDGE_CURVE('',#127046,#127054,#127056,.T.); +#127054 = VERTEX_POINT('',#127055); +#127055 = CARTESIAN_POINT('',(128.306941,-137.037266,1.585)); +#127056 = CIRCLE('',#127057,0.267251611057); +#127057 = AXIS2_PLACEMENT_3D('',#127058,#127059,#127060); +#127058 = CARTESIAN_POINT('',(128.37508521626,-136.7788481418,1.585)); +#127059 = DIRECTION('',(0.,0.,1.)); +#127060 = DIRECTION('',(-0.966947272063,-0.254976416656,0.)); +#127061 = ORIENTED_EDGE('',*,*,#127062,.T.); +#127062 = EDGE_CURVE('',#127054,#127063,#127065,.T.); +#127063 = VERTEX_POINT('',#127064); +#127064 = CARTESIAN_POINT('',(128.526394,-137.037266,1.585)); +#127065 = LINE('',#127066,#127067); +#127066 = CARTESIAN_POINT('',(128.306941,-137.037266,1.585)); +#127067 = VECTOR('',#127068,1.); +#127068 = DIRECTION('',(1.,0.,0.)); +#127069 = ORIENTED_EDGE('',*,*,#127070,.T.); +#127070 = EDGE_CURVE('',#127063,#127071,#127073,.T.); +#127071 = VERTEX_POINT('',#127072); +#127072 = CARTESIAN_POINT('',(128.656922,-136.974151,1.585)); +#127073 = LINE('',#127074,#127075); +#127074 = CARTESIAN_POINT('',(128.526394,-137.037266,1.585)); +#127075 = VECTOR('',#127076,1.); +#127076 = DIRECTION('',(0.900277418559,0.435316631469,0.)); +#127077 = ORIENTED_EDGE('',*,*,#127078,.T.); +#127078 = EDGE_CURVE('',#127071,#127079,#127081,.T.); +#127079 = VERTEX_POINT('',#127080); +#127080 = CARTESIAN_POINT('',(128.744646,-137.1496,1.585)); +#127081 = CIRCLE('',#127082,0.100000294132); +#127082 = AXIS2_PLACEMENT_3D('',#127083,#127084,#127085); +#127083 = CARTESIAN_POINT('',(128.68333471921,-137.0706000906,1.585)); +#127084 = DIRECTION('',(0.,0.,-1.)); +#127085 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#127086 = ORIENTED_EDGE('',*,*,#127087,.T.); +#127087 = EDGE_CURVE('',#127079,#127088,#127090,.T.); +#127088 = VERTEX_POINT('',#127089); +#127089 = CARTESIAN_POINT('',(128.576414,-137.233715,1.585)); +#127090 = LINE('',#127091,#127092); +#127091 = CARTESIAN_POINT('',(128.744646,-137.1496,1.585)); +#127092 = VECTOR('',#127093,1.); +#127093 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#127094 = ORIENTED_EDGE('',*,*,#127095,.T.); +#127095 = EDGE_CURVE('',#127088,#127096,#127098,.T.); +#127096 = VERTEX_POINT('',#127097); +#127097 = CARTESIAN_POINT('',(128.550001,-137.237266,1.585)); +#127098 = LINE('',#127099,#127100); +#127099 = CARTESIAN_POINT('',(128.576414,-137.233715,1.585)); +#127100 = VECTOR('',#127101,1.); +#127101 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#127102 = ORIENTED_EDGE('',*,*,#127103,.T.); +#127103 = EDGE_CURVE('',#127096,#127104,#127106,.T.); +#127104 = VERTEX_POINT('',#127105); +#127105 = CARTESIAN_POINT('',(128.263825,-137.235345,1.585)); +#127106 = LINE('',#127107,#127108); +#127107 = CARTESIAN_POINT('',(128.550001,-137.237266,1.585)); +#127108 = VECTOR('',#127109,1.); +#127109 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#127110 = ORIENTED_EDGE('',*,*,#127111,.T.); +#127111 = EDGE_CURVE('',#127104,#127112,#127114,.T.); +#127112 = VERTEX_POINT('',#127113); +#127113 = CARTESIAN_POINT('',(128.238613,-137.226709,1.585)); +#127114 = LINE('',#127115,#127116); +#127115 = CARTESIAN_POINT('',(128.263825,-137.235345,1.585)); +#127116 = VECTOR('',#127117,1.); +#127117 = DIRECTION('',(-0.946039317712,0.324051862119,0.)); +#127118 = ORIENTED_EDGE('',*,*,#127119,.T.); +#127119 = EDGE_CURVE('',#127112,#127120,#127122,.T.); +#127120 = VERTEX_POINT('',#127121); +#127121 = CARTESIAN_POINT('',(128.086959,-137.147605,1.585)); +#127122 = LINE('',#127123,#127124); +#127123 = CARTESIAN_POINT('',(128.238613,-137.226709,1.585)); +#127124 = VECTOR('',#127125,1.); +#127125 = DIRECTION('',(-0.886632377277,0.462474893983,0.)); +#127126 = ORIENTED_EDGE('',*,*,#127127,.T.); +#127127 = EDGE_CURVE('',#127120,#127128,#127130,.T.); +#127128 = VERTEX_POINT('',#127129); +#127129 = CARTESIAN_POINT('',(127.999177,-137.057053,1.585)); +#127130 = LINE('',#127131,#127132); +#127131 = CARTESIAN_POINT('',(128.086959,-137.147605,1.585)); +#127132 = VECTOR('',#127133,1.); +#127133 = DIRECTION('',(-0.696039578142,0.718003416189,0.)); +#127134 = ORIENTED_EDGE('',*,*,#127135,.T.); +#127135 = EDGE_CURVE('',#127128,#127136,#127138,.T.); +#127136 = VERTEX_POINT('',#127137); +#127137 = CARTESIAN_POINT('',(127.920218,-136.897013,1.585)); +#127138 = LINE('',#127139,#127140); +#127139 = CARTESIAN_POINT('',(127.999177,-137.057053,1.585)); +#127140 = VECTOR('',#127141,1.); +#127141 = DIRECTION('',(-0.442450976154,0.896792692711,0.)); +#127142 = ORIENTED_EDGE('',*,*,#127143,.T.); +#127143 = EDGE_CURVE('',#127136,#127144,#127146,.T.); +#127144 = VERTEX_POINT('',#127145); +#127145 = CARTESIAN_POINT('',(127.916667,-136.8706,1.585)); +#127146 = LINE('',#127147,#127148); +#127147 = CARTESIAN_POINT('',(127.920218,-136.897013,1.585)); +#127148 = VECTOR('',#127149,1.); +#127149 = DIRECTION('',(-0.133242620288,0.991083449634,0.)); +#127150 = ORIENTED_EDGE('',*,*,#127151,.T.); +#127151 = EDGE_CURVE('',#127144,#127152,#127154,.T.); +#127152 = VERTEX_POINT('',#127153); +#127153 = CARTESIAN_POINT('',(127.918588,-136.451091,1.585)); +#127154 = LINE('',#127155,#127156); +#127155 = CARTESIAN_POINT('',(127.916667,-136.8706,1.585)); +#127156 = VECTOR('',#127157,1.); +#127157 = DIRECTION('',(4.579114774285E-03,0.999989515799,0.)); +#127158 = ORIENTED_EDGE('',*,*,#127159,.T.); +#127159 = EDGE_CURVE('',#127152,#127160,#127162,.T.); +#127160 = VERTEX_POINT('',#127161); +#127161 = CARTESIAN_POINT('',(127.927224,-136.425879,1.585)); +#127162 = LINE('',#127163,#127164); +#127163 = CARTESIAN_POINT('',(127.918588,-136.451091,1.585)); +#127164 = VECTOR('',#127165,1.); +#127165 = DIRECTION('',(0.32405186212,0.946039317712,0.)); +#127166 = ORIENTED_EDGE('',*,*,#127167,.T.); +#127167 = EDGE_CURVE('',#127160,#127168,#127170,.T.); +#127168 = VERTEX_POINT('',#127169); +#127169 = CARTESIAN_POINT('',(128.006331,-136.274221,1.585)); +#127170 = LINE('',#127171,#127172); +#127171 = CARTESIAN_POINT('',(127.927224,-136.425879,1.585)); +#127172 = VECTOR('',#127173,1.); +#127173 = DIRECTION('',(0.462479092578,0.886630187242,0.)); +#127174 = ORIENTED_EDGE('',*,*,#127175,.T.); +#127175 = EDGE_CURVE('',#127168,#126970,#127176,.T.); +#127176 = LINE('',#127177,#127178); +#127177 = CARTESIAN_POINT('',(128.006331,-136.274221,1.585)); +#127178 = VECTOR('',#127179,1.); +#127179 = DIRECTION('',(0.718015182968,0.696027439852,0.)); +#127180 = PLANE('',#127181); +#127181 = AXIS2_PLACEMENT_3D('',#127182,#127183,#127184); +#127182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127183 = DIRECTION('',(0.,0.,1.)); +#127184 = DIRECTION('',(1.,0.,-0.)); +#127185 = SHELL_BASED_SURFACE_MODEL('',(#127186)); +#127186 = OPEN_SHELL('',(#127187)); +#127187 = ADVANCED_FACE('',(#127188),#127307,.T.); +#127188 = FACE_BOUND('',#127189,.F.); +#127189 = EDGE_LOOP('',(#127190,#127201,#127209,#127218,#127226,#127234, + #127243,#127251,#127260,#127268,#127276,#127285,#127293,#127301)); +#127190 = ORIENTED_EDGE('',*,*,#127191,.T.); +#127191 = EDGE_CURVE('',#127192,#127194,#127196,.T.); +#127192 = VERTEX_POINT('',#127193); +#127193 = CARTESIAN_POINT('',(114.285313,-136.127671,1.585)); +#127194 = VERTEX_POINT('',#127195); +#127195 = CARTESIAN_POINT('',(114.449663,-136.212119,1.585)); +#127196 = CIRCLE('',#127197,0.100000186139); +#127197 = AXIS2_PLACEMENT_3D('',#127198,#127199,#127200); +#127198 = CARTESIAN_POINT('',(114.34999846424,-136.2039325757,1.585)); +#127199 = DIRECTION('',(0.,0.,-1.)); +#127200 = DIRECTION('',(-0.64685343843,0.762614338438,0.)); +#127201 = ORIENTED_EDGE('',*,*,#127202,.T.); +#127202 = EDGE_CURVE('',#127194,#127203,#127205,.T.); +#127203 = VERTEX_POINT('',#127204); +#127204 = CARTESIAN_POINT('',(114.172278,-137.182969,1.585)); +#127205 = LINE('',#127206,#127207); +#127206 = CARTESIAN_POINT('',(114.449663,-136.212119,1.585)); +#127207 = VECTOR('',#127208,1.); +#127208 = DIRECTION('',(-0.274720473863,-0.961524134507,0.)); +#127209 = ORIENTED_EDGE('',*,*,#127210,.T.); +#127210 = EDGE_CURVE('',#127203,#127211,#127213,.T.); +#127211 = VERTEX_POINT('',#127212); +#127212 = CARTESIAN_POINT('',(113.999513,-137.191805,1.585)); +#127213 = CIRCLE('',#127214,0.100001498435); +#127214 = AXIS2_PLACEMENT_3D('',#127215,#127216,#127217); +#127215 = CARTESIAN_POINT('',(114.08333199972,-137.137264419,1.585)); +#127216 = DIRECTION('',(-0.,0.,-1.)); +#127217 = DIRECTION('',(0.889446675006,-0.457038961492,-0.)); +#127218 = ORIENTED_EDGE('',*,*,#127219,.T.); +#127219 = EDGE_CURVE('',#127211,#127220,#127222,.T.); +#127220 = VERTEX_POINT('',#127221); +#127221 = CARTESIAN_POINT('',(113.816664,-136.739857,1.585)); +#127222 = LINE('',#127223,#127224); +#127223 = CARTESIAN_POINT('',(113.999513,-137.191805,1.585)); +#127224 = VECTOR('',#127225,1.); +#127225 = DIRECTION('',(-0.375047649202,0.927005534411,0.)); +#127226 = ORIENTED_EDGE('',*,*,#127227,.T.); +#127227 = EDGE_CURVE('',#127220,#127228,#127230,.T.); +#127228 = VERTEX_POINT('',#127229); +#127229 = CARTESIAN_POINT('',(113.633817,-137.191805,1.585)); +#127230 = LINE('',#127231,#127232); +#127231 = CARTESIAN_POINT('',(113.816664,-136.739857,1.585)); +#127232 = VECTOR('',#127233,1.); +#127233 = DIRECTION('',(-0.375044123955,-0.927006960646,0.)); +#127234 = ORIENTED_EDGE('',*,*,#127235,.T.); +#127235 = EDGE_CURVE('',#127228,#127236,#127238,.T.); +#127236 = VERTEX_POINT('',#127237); +#127237 = CARTESIAN_POINT('',(113.461052,-137.182969,1.585)); +#127238 = CIRCLE('',#127239,0.100000789337); +#127239 = AXIS2_PLACEMENT_3D('',#127240,#127241,#127242); +#127240 = CARTESIAN_POINT('',(113.54999792811,-137.13726583,1.585)); +#127241 = DIRECTION('',(-0.,0.,-1.)); +#127242 = DIRECTION('',(0.838184102806,-0.545387394247,-0.)); +#127243 = ORIENTED_EDGE('',*,*,#127244,.T.); +#127244 = EDGE_CURVE('',#127236,#127245,#127247,.T.); +#127245 = VERTEX_POINT('',#127246); +#127246 = CARTESIAN_POINT('',(113.183667,-136.212119,1.585)); +#127247 = LINE('',#127248,#127249); +#127248 = CARTESIAN_POINT('',(113.461052,-137.182969,1.585)); +#127249 = VECTOR('',#127250,1.); +#127250 = DIRECTION('',(-0.274720473863,0.961524134507,0.)); +#127251 = ORIENTED_EDGE('',*,*,#127252,.T.); +#127252 = EDGE_CURVE('',#127245,#127253,#127255,.T.); +#127253 = VERTEX_POINT('',#127254); +#127254 = CARTESIAN_POINT('',(113.372278,-136.15823,1.585)); +#127255 = CIRCLE('',#127256,0.100000670821); +#127256 = AXIS2_PLACEMENT_3D('',#127257,#127258,#127259); +#127257 = CARTESIAN_POINT('',(113.28333204531,-136.2039328588,1.585)); +#127258 = DIRECTION('',(0.,0.,-1.)); +#127259 = DIRECTION('',(-0.996643767489,-8.186086198219E-02,-0.)); +#127260 = ORIENTED_EDGE('',*,*,#127261,.T.); +#127261 = EDGE_CURVE('',#127253,#127262,#127264,.T.); +#127262 = VERTEX_POINT('',#127263); +#127263 = CARTESIAN_POINT('',(113.565789,-136.82853,1.585)); +#127264 = LINE('',#127265,#127266); +#127265 = CARTESIAN_POINT('',(113.372278,-136.15823,1.585)); +#127266 = VECTOR('',#127267,1.); +#127267 = DIRECTION('',(0.277366050801,-0.960764317543,0.)); +#127268 = ORIENTED_EDGE('',*,*,#127269,.T.); +#127269 = EDGE_CURVE('',#127262,#127270,#127272,.T.); +#127270 = VERTEX_POINT('',#127271); +#127271 = CARTESIAN_POINT('',(113.734202,-136.414033,1.585)); +#127272 = LINE('',#127273,#127274); +#127273 = CARTESIAN_POINT('',(113.565789,-136.82853,1.585)); +#127274 = VECTOR('',#127275,1.); +#127275 = DIRECTION('',(0.376422310851,0.926448187377,0.)); +#127276 = ORIENTED_EDGE('',*,*,#127277,.T.); +#127277 = EDGE_CURVE('',#127270,#127278,#127280,.T.); +#127278 = VERTEX_POINT('',#127279); +#127279 = CARTESIAN_POINT('',(113.900484,-136.416061,1.585)); +#127280 = CIRCLE('',#127281,9.999924111413E-02); +#127281 = AXIS2_PLACEMENT_3D('',#127282,#127283,#127284); +#127282 = CARTESIAN_POINT('',(113.81666548938,-136.4705981937,1.585)); +#127283 = DIRECTION('',(0.,0.,-1.)); +#127284 = DIRECTION('',(-0.824641151886,0.565656230069,0.)); +#127285 = ORIENTED_EDGE('',*,*,#127286,.T.); +#127286 = EDGE_CURVE('',#127278,#127287,#127289,.T.); +#127287 = VERTEX_POINT('',#127288); +#127288 = CARTESIAN_POINT('',(114.06754,-136.82853,1.585)); +#127289 = LINE('',#127290,#127291); +#127290 = CARTESIAN_POINT('',(113.900484,-136.416061,1.585)); +#127291 = VECTOR('',#127292,1.); +#127292 = DIRECTION('',(0.375394056684,-0.926865309636,0.)); +#127293 = ORIENTED_EDGE('',*,*,#127294,.T.); +#127294 = EDGE_CURVE('',#127287,#127295,#127297,.T.); +#127295 = VERTEX_POINT('',#127296); +#127296 = CARTESIAN_POINT('',(114.261052,-136.15823,1.585)); +#127297 = LINE('',#127298,#127299); +#127298 = CARTESIAN_POINT('',(114.06754,-136.82853,1.585)); +#127299 = VECTOR('',#127300,1.); +#127300 = DIRECTION('',(0.277367373866,0.960763935582,0.)); +#127301 = ORIENTED_EDGE('',*,*,#127302,.T.); +#127302 = EDGE_CURVE('',#127295,#127192,#127303,.T.); +#127303 = LINE('',#127304,#127305); +#127304 = CARTESIAN_POINT('',(114.261052,-136.15823,1.585)); +#127305 = VECTOR('',#127306,1.); +#127306 = DIRECTION('',(0.621780901151,0.783191235245,0.)); +#127307 = PLANE('',#127308); +#127308 = AXIS2_PLACEMENT_3D('',#127309,#127310,#127311); +#127309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127310 = DIRECTION('',(0.,0.,1.)); +#127311 = DIRECTION('',(1.,0.,-0.)); +#127312 = SHELL_BASED_SURFACE_MODEL('',(#127313)); +#127313 = OPEN_SHELL('',(#127314)); +#127314 = ADVANCED_FACE('',(#127315),#127434,.T.); +#127315 = FACE_BOUND('',#127316,.F.); +#127316 = EDGE_LOOP('',(#127317,#127328,#127336,#127345,#127353,#127361, + #127370,#127378,#127387,#127395,#127403,#127412,#127420,#127428)); +#127317 = ORIENTED_EDGE('',*,*,#127318,.T.); +#127318 = EDGE_CURVE('',#127319,#127321,#127323,.T.); +#127319 = VERTEX_POINT('',#127320); +#127320 = CARTESIAN_POINT('',(115.75198,-136.127671,1.585)); +#127321 = VERTEX_POINT('',#127322); +#127322 = CARTESIAN_POINT('',(115.91633,-136.212119,1.585)); +#127323 = CIRCLE('',#127324,0.100000186139); +#127324 = AXIS2_PLACEMENT_3D('',#127325,#127326,#127327); +#127325 = CARTESIAN_POINT('',(115.81666546424,-136.2039325757,1.585)); +#127326 = DIRECTION('',(0.,0.,-1.)); +#127327 = DIRECTION('',(-0.64685343843,0.762614338438,0.)); +#127328 = ORIENTED_EDGE('',*,*,#127329,.T.); +#127329 = EDGE_CURVE('',#127321,#127330,#127332,.T.); +#127330 = VERTEX_POINT('',#127331); +#127331 = CARTESIAN_POINT('',(115.638945,-137.182969,1.585)); +#127332 = LINE('',#127333,#127334); +#127333 = CARTESIAN_POINT('',(115.91633,-136.212119,1.585)); +#127334 = VECTOR('',#127335,1.); +#127335 = DIRECTION('',(-0.274720473863,-0.961524134507,0.)); +#127336 = ORIENTED_EDGE('',*,*,#127337,.T.); +#127337 = EDGE_CURVE('',#127330,#127338,#127340,.T.); +#127338 = VERTEX_POINT('',#127339); +#127339 = CARTESIAN_POINT('',(115.46618,-137.191805,1.585)); +#127340 = CIRCLE('',#127341,0.100001498435); +#127341 = AXIS2_PLACEMENT_3D('',#127342,#127343,#127344); +#127342 = CARTESIAN_POINT('',(115.54999899972,-137.137264419,1.585)); +#127343 = DIRECTION('',(-0.,0.,-1.)); +#127344 = DIRECTION('',(0.889446675006,-0.457038961492,-0.)); +#127345 = ORIENTED_EDGE('',*,*,#127346,.T.); +#127346 = EDGE_CURVE('',#127338,#127347,#127349,.T.); +#127347 = VERTEX_POINT('',#127348); +#127348 = CARTESIAN_POINT('',(115.283331,-136.739857,1.585)); +#127349 = LINE('',#127350,#127351); +#127350 = CARTESIAN_POINT('',(115.46618,-137.191805,1.585)); +#127351 = VECTOR('',#127352,1.); +#127352 = DIRECTION('',(-0.375047649202,0.927005534411,0.)); +#127353 = ORIENTED_EDGE('',*,*,#127354,.T.); +#127354 = EDGE_CURVE('',#127347,#127355,#127357,.T.); +#127355 = VERTEX_POINT('',#127356); +#127356 = CARTESIAN_POINT('',(115.100484,-137.191805,1.585)); +#127357 = LINE('',#127358,#127359); +#127358 = CARTESIAN_POINT('',(115.283331,-136.739857,1.585)); +#127359 = VECTOR('',#127360,1.); +#127360 = DIRECTION('',(-0.375044123955,-0.927006960646,0.)); +#127361 = ORIENTED_EDGE('',*,*,#127362,.T.); +#127362 = EDGE_CURVE('',#127355,#127363,#127365,.T.); +#127363 = VERTEX_POINT('',#127364); +#127364 = CARTESIAN_POINT('',(114.927719,-137.182969,1.585)); +#127365 = CIRCLE('',#127366,0.100000789337); +#127366 = AXIS2_PLACEMENT_3D('',#127367,#127368,#127369); +#127367 = CARTESIAN_POINT('',(115.01666492811,-137.13726583,1.585)); +#127368 = DIRECTION('',(-0.,0.,-1.)); +#127369 = DIRECTION('',(0.838184102806,-0.545387394247,-0.)); +#127370 = ORIENTED_EDGE('',*,*,#127371,.T.); +#127371 = EDGE_CURVE('',#127363,#127372,#127374,.T.); +#127372 = VERTEX_POINT('',#127373); +#127373 = CARTESIAN_POINT('',(114.650334,-136.212119,1.585)); +#127374 = LINE('',#127375,#127376); +#127375 = CARTESIAN_POINT('',(114.927719,-137.182969,1.585)); +#127376 = VECTOR('',#127377,1.); +#127377 = DIRECTION('',(-0.274720473863,0.961524134507,0.)); +#127378 = ORIENTED_EDGE('',*,*,#127379,.T.); +#127379 = EDGE_CURVE('',#127372,#127380,#127382,.T.); +#127380 = VERTEX_POINT('',#127381); +#127381 = CARTESIAN_POINT('',(114.838945,-136.15823,1.585)); +#127382 = CIRCLE('',#127383,0.100000670821); +#127383 = AXIS2_PLACEMENT_3D('',#127384,#127385,#127386); +#127384 = CARTESIAN_POINT('',(114.74999904531,-136.2039328588,1.585)); +#127385 = DIRECTION('',(0.,0.,-1.)); +#127386 = DIRECTION('',(-0.996643767489,-8.186086198219E-02,-0.)); +#127387 = ORIENTED_EDGE('',*,*,#127388,.T.); +#127388 = EDGE_CURVE('',#127380,#127389,#127391,.T.); +#127389 = VERTEX_POINT('',#127390); +#127390 = CARTESIAN_POINT('',(115.032456,-136.82853,1.585)); +#127391 = LINE('',#127392,#127393); +#127392 = CARTESIAN_POINT('',(114.838945,-136.15823,1.585)); +#127393 = VECTOR('',#127394,1.); +#127394 = DIRECTION('',(0.277366050801,-0.960764317543,0.)); +#127395 = ORIENTED_EDGE('',*,*,#127396,.T.); +#127396 = EDGE_CURVE('',#127389,#127397,#127399,.T.); +#127397 = VERTEX_POINT('',#127398); +#127398 = CARTESIAN_POINT('',(115.200869,-136.414033,1.585)); +#127399 = LINE('',#127400,#127401); +#127400 = CARTESIAN_POINT('',(115.032456,-136.82853,1.585)); +#127401 = VECTOR('',#127402,1.); +#127402 = DIRECTION('',(0.376422310851,0.926448187377,0.)); +#127403 = ORIENTED_EDGE('',*,*,#127404,.T.); +#127404 = EDGE_CURVE('',#127397,#127405,#127407,.T.); +#127405 = VERTEX_POINT('',#127406); +#127406 = CARTESIAN_POINT('',(115.367151,-136.416061,1.585)); +#127407 = CIRCLE('',#127408,9.999924111413E-02); +#127408 = AXIS2_PLACEMENT_3D('',#127409,#127410,#127411); +#127409 = CARTESIAN_POINT('',(115.28333248938,-136.4705981937,1.585)); +#127410 = DIRECTION('',(0.,0.,-1.)); +#127411 = DIRECTION('',(-0.824641151886,0.565656230069,0.)); +#127412 = ORIENTED_EDGE('',*,*,#127413,.T.); +#127413 = EDGE_CURVE('',#127405,#127414,#127416,.T.); +#127414 = VERTEX_POINT('',#127415); +#127415 = CARTESIAN_POINT('',(115.534207,-136.82853,1.585)); +#127416 = LINE('',#127417,#127418); +#127417 = CARTESIAN_POINT('',(115.367151,-136.416061,1.585)); +#127418 = VECTOR('',#127419,1.); +#127419 = DIRECTION('',(0.375394056684,-0.926865309636,0.)); +#127420 = ORIENTED_EDGE('',*,*,#127421,.T.); +#127421 = EDGE_CURVE('',#127414,#127422,#127424,.T.); +#127422 = VERTEX_POINT('',#127423); +#127423 = CARTESIAN_POINT('',(115.727719,-136.15823,1.585)); +#127424 = LINE('',#127425,#127426); +#127425 = CARTESIAN_POINT('',(115.534207,-136.82853,1.585)); +#127426 = VECTOR('',#127427,1.); +#127427 = DIRECTION('',(0.277367373866,0.960763935582,0.)); +#127428 = ORIENTED_EDGE('',*,*,#127429,.T.); +#127429 = EDGE_CURVE('',#127422,#127319,#127430,.T.); +#127430 = LINE('',#127431,#127432); +#127431 = CARTESIAN_POINT('',(115.727719,-136.15823,1.585)); +#127432 = VECTOR('',#127433,1.); +#127433 = DIRECTION('',(0.621780901151,0.783191235245,0.)); +#127434 = PLANE('',#127435); +#127435 = AXIS2_PLACEMENT_3D('',#127436,#127437,#127438); +#127436 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127437 = DIRECTION('',(0.,0.,1.)); +#127438 = DIRECTION('',(1.,0.,-0.)); +#127439 = SHELL_BASED_SURFACE_MODEL('',(#127440)); +#127440 = OPEN_SHELL('',(#127441)); +#127441 = ADVANCED_FACE('',(#127442),#127561,.T.); +#127442 = FACE_BOUND('',#127443,.F.); +#127443 = EDGE_LOOP('',(#127444,#127455,#127463,#127472,#127480,#127488, + #127497,#127505,#127514,#127522,#127530,#127539,#127547,#127555)); +#127444 = ORIENTED_EDGE('',*,*,#127445,.T.); +#127445 = EDGE_CURVE('',#127446,#127448,#127450,.T.); +#127446 = VERTEX_POINT('',#127447); +#127447 = CARTESIAN_POINT('',(117.218647,-136.127671,1.585)); +#127448 = VERTEX_POINT('',#127449); +#127449 = CARTESIAN_POINT('',(117.382997,-136.212119,1.585)); +#127450 = CIRCLE('',#127451,0.100000186139); +#127451 = AXIS2_PLACEMENT_3D('',#127452,#127453,#127454); +#127452 = CARTESIAN_POINT('',(117.28333246424,-136.2039325757,1.585)); +#127453 = DIRECTION('',(0.,0.,-1.)); +#127454 = DIRECTION('',(-0.64685343843,0.762614338438,0.)); +#127455 = ORIENTED_EDGE('',*,*,#127456,.T.); +#127456 = EDGE_CURVE('',#127448,#127457,#127459,.T.); +#127457 = VERTEX_POINT('',#127458); +#127458 = CARTESIAN_POINT('',(117.105612,-137.182969,1.585)); +#127459 = LINE('',#127460,#127461); +#127460 = CARTESIAN_POINT('',(117.382997,-136.212119,1.585)); +#127461 = VECTOR('',#127462,1.); +#127462 = DIRECTION('',(-0.274720473863,-0.961524134507,0.)); +#127463 = ORIENTED_EDGE('',*,*,#127464,.T.); +#127464 = EDGE_CURVE('',#127457,#127465,#127467,.T.); +#127465 = VERTEX_POINT('',#127466); +#127466 = CARTESIAN_POINT('',(116.932847,-137.191805,1.585)); +#127467 = CIRCLE('',#127468,0.100001498435); +#127468 = AXIS2_PLACEMENT_3D('',#127469,#127470,#127471); +#127469 = CARTESIAN_POINT('',(117.01666599972,-137.137264419,1.585)); +#127470 = DIRECTION('',(-0.,0.,-1.)); +#127471 = DIRECTION('',(0.889446675006,-0.457038961492,-0.)); +#127472 = ORIENTED_EDGE('',*,*,#127473,.T.); +#127473 = EDGE_CURVE('',#127465,#127474,#127476,.T.); +#127474 = VERTEX_POINT('',#127475); +#127475 = CARTESIAN_POINT('',(116.749998,-136.739857,1.585)); +#127476 = LINE('',#127477,#127478); +#127477 = CARTESIAN_POINT('',(116.932847,-137.191805,1.585)); +#127478 = VECTOR('',#127479,1.); +#127479 = DIRECTION('',(-0.375047649202,0.927005534411,0.)); +#127480 = ORIENTED_EDGE('',*,*,#127481,.T.); +#127481 = EDGE_CURVE('',#127474,#127482,#127484,.T.); +#127482 = VERTEX_POINT('',#127483); +#127483 = CARTESIAN_POINT('',(116.567151,-137.191805,1.585)); +#127484 = LINE('',#127485,#127486); +#127485 = CARTESIAN_POINT('',(116.749998,-136.739857,1.585)); +#127486 = VECTOR('',#127487,1.); +#127487 = DIRECTION('',(-0.375044123955,-0.927006960646,0.)); +#127488 = ORIENTED_EDGE('',*,*,#127489,.T.); +#127489 = EDGE_CURVE('',#127482,#127490,#127492,.T.); +#127490 = VERTEX_POINT('',#127491); +#127491 = CARTESIAN_POINT('',(116.394386,-137.182969,1.585)); +#127492 = CIRCLE('',#127493,0.100000789337); +#127493 = AXIS2_PLACEMENT_3D('',#127494,#127495,#127496); +#127494 = CARTESIAN_POINT('',(116.48333192811,-137.13726583,1.585)); +#127495 = DIRECTION('',(-0.,0.,-1.)); +#127496 = DIRECTION('',(0.838184102806,-0.545387394247,-0.)); +#127497 = ORIENTED_EDGE('',*,*,#127498,.T.); +#127498 = EDGE_CURVE('',#127490,#127499,#127501,.T.); +#127499 = VERTEX_POINT('',#127500); +#127500 = CARTESIAN_POINT('',(116.117001,-136.212119,1.585)); +#127501 = LINE('',#127502,#127503); +#127502 = CARTESIAN_POINT('',(116.394386,-137.182969,1.585)); +#127503 = VECTOR('',#127504,1.); +#127504 = DIRECTION('',(-0.274720473863,0.961524134507,0.)); +#127505 = ORIENTED_EDGE('',*,*,#127506,.T.); +#127506 = EDGE_CURVE('',#127499,#127507,#127509,.T.); +#127507 = VERTEX_POINT('',#127508); +#127508 = CARTESIAN_POINT('',(116.305612,-136.15823,1.585)); +#127509 = CIRCLE('',#127510,0.100000670821); +#127510 = AXIS2_PLACEMENT_3D('',#127511,#127512,#127513); +#127511 = CARTESIAN_POINT('',(116.21666604531,-136.2039328588,1.585)); +#127512 = DIRECTION('',(0.,0.,-1.)); +#127513 = DIRECTION('',(-0.996643767489,-8.186086198219E-02,-0.)); +#127514 = ORIENTED_EDGE('',*,*,#127515,.T.); +#127515 = EDGE_CURVE('',#127507,#127516,#127518,.T.); +#127516 = VERTEX_POINT('',#127517); +#127517 = CARTESIAN_POINT('',(116.499123,-136.82853,1.585)); +#127518 = LINE('',#127519,#127520); +#127519 = CARTESIAN_POINT('',(116.305612,-136.15823,1.585)); +#127520 = VECTOR('',#127521,1.); +#127521 = DIRECTION('',(0.277366050801,-0.960764317543,0.)); +#127522 = ORIENTED_EDGE('',*,*,#127523,.T.); +#127523 = EDGE_CURVE('',#127516,#127524,#127526,.T.); +#127524 = VERTEX_POINT('',#127525); +#127525 = CARTESIAN_POINT('',(116.667536,-136.414033,1.585)); +#127526 = LINE('',#127527,#127528); +#127527 = CARTESIAN_POINT('',(116.499123,-136.82853,1.585)); +#127528 = VECTOR('',#127529,1.); +#127529 = DIRECTION('',(0.376422310851,0.926448187377,0.)); +#127530 = ORIENTED_EDGE('',*,*,#127531,.T.); +#127531 = EDGE_CURVE('',#127524,#127532,#127534,.T.); +#127532 = VERTEX_POINT('',#127533); +#127533 = CARTESIAN_POINT('',(116.833818,-136.416061,1.585)); +#127534 = CIRCLE('',#127535,9.999924111411E-02); +#127535 = AXIS2_PLACEMENT_3D('',#127536,#127537,#127538); +#127536 = CARTESIAN_POINT('',(116.74999948938,-136.4705981937,1.585)); +#127537 = DIRECTION('',(0.,0.,-1.)); +#127538 = DIRECTION('',(-0.824641151886,0.565656230069,0.)); +#127539 = ORIENTED_EDGE('',*,*,#127540,.T.); +#127540 = EDGE_CURVE('',#127532,#127541,#127543,.T.); +#127541 = VERTEX_POINT('',#127542); +#127542 = CARTESIAN_POINT('',(117.000874,-136.82853,1.585)); +#127543 = LINE('',#127544,#127545); +#127544 = CARTESIAN_POINT('',(116.833818,-136.416061,1.585)); +#127545 = VECTOR('',#127546,1.); +#127546 = DIRECTION('',(0.375394056684,-0.926865309636,0.)); +#127547 = ORIENTED_EDGE('',*,*,#127548,.T.); +#127548 = EDGE_CURVE('',#127541,#127549,#127551,.T.); +#127549 = VERTEX_POINT('',#127550); +#127550 = CARTESIAN_POINT('',(117.194386,-136.15823,1.585)); +#127551 = LINE('',#127552,#127553); +#127552 = CARTESIAN_POINT('',(117.000874,-136.82853,1.585)); +#127553 = VECTOR('',#127554,1.); +#127554 = DIRECTION('',(0.277367373866,0.960763935582,0.)); +#127555 = ORIENTED_EDGE('',*,*,#127556,.T.); +#127556 = EDGE_CURVE('',#127549,#127446,#127557,.T.); +#127557 = LINE('',#127558,#127559); +#127558 = CARTESIAN_POINT('',(117.194386,-136.15823,1.585)); +#127559 = VECTOR('',#127560,1.); +#127560 = DIRECTION('',(0.621780901151,0.783191235245,0.)); +#127561 = PLANE('',#127562); +#127562 = AXIS2_PLACEMENT_3D('',#127563,#127564,#127565); +#127563 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127564 = DIRECTION('',(0.,0.,1.)); +#127565 = DIRECTION('',(1.,0.,-0.)); +#127566 = SHELL_BASED_SURFACE_MODEL('',(#127567)); +#127567 = OPEN_SHELL('',(#127568)); +#127568 = ADVANCED_FACE('',(#127569),#127669,.T.); +#127569 = FACE_BOUND('',#127570,.F.); +#127570 = EDGE_LOOP('',(#127571,#127582,#127590,#127598,#127606,#127615, + #127623,#127631,#127639,#127647,#127655,#127663)); +#127571 = ORIENTED_EDGE('',*,*,#127572,.T.); +#127572 = EDGE_CURVE('',#127573,#127575,#127577,.T.); +#127573 = VERTEX_POINT('',#127574); +#127574 = CARTESIAN_POINT('',(120.894443,-135.654119,1.585)); +#127575 = VERTEX_POINT('',#127576); +#127576 = CARTESIAN_POINT('',(121.048079,-135.717757,1.585)); +#127577 = CIRCLE('',#127578,0.100000590676); +#127578 = AXIS2_PLACEMENT_3D('',#127579,#127580,#127581); +#127579 = CARTESIAN_POINT('',(120.95,-135.7372666872,1.585)); +#127580 = DIRECTION('',(0.,0.,-1.)); +#127581 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#127582 = ORIENTED_EDGE('',*,*,#127583,.T.); +#127583 = EDGE_CURVE('',#127575,#127584,#127586,.T.); +#127584 = VERTEX_POINT('',#127585); +#127585 = CARTESIAN_POINT('',(121.05,-136.913659,1.585)); +#127586 = LINE('',#127587,#127588); +#127587 = CARTESIAN_POINT('',(121.048079,-135.717757,1.585)); +#127588 = VECTOR('',#127589,1.); +#127589 = DIRECTION('',(1.606316840059E-03,-0.999998709872,0.)); +#127590 = ORIENTED_EDGE('',*,*,#127591,.T.); +#127591 = EDGE_CURVE('',#127584,#127592,#127594,.T.); +#127592 = VERTEX_POINT('',#127593); +#127593 = CARTESIAN_POINT('',(121.091202,-136.996064,1.585)); +#127594 = LINE('',#127595,#127596); +#127595 = CARTESIAN_POINT('',(121.05,-136.913659,1.585)); +#127596 = VECTOR('',#127597,1.); +#127597 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#127598 = ORIENTED_EDGE('',*,*,#127599,.T.); +#127599 = EDGE_CURVE('',#127592,#127600,#127602,.T.); +#127600 = VERTEX_POINT('',#127601); +#127601 = CARTESIAN_POINT('',(121.211312,-137.058266,1.585)); +#127602 = LINE('',#127603,#127604); +#127603 = CARTESIAN_POINT('',(121.091202,-136.996064,1.585)); +#127604 = VECTOR('',#127605,1.); +#127605 = DIRECTION('',(0.887987832152,-0.459866948094,0.)); +#127606 = ORIENTED_EDGE('',*,*,#127607,.T.); +#127607 = EDGE_CURVE('',#127600,#127608,#127610,.T.); +#127608 = VERTEX_POINT('',#127609); +#127609 = CARTESIAN_POINT('',(121.123588,-137.233715,1.585)); +#127610 = CIRCLE('',#127611,0.100000224242); +#127611 = AXIS2_PLACEMENT_3D('',#127612,#127613,#127614); +#127612 = CARTESIAN_POINT('',(121.15000103964,-137.1372660695,1.585)); +#127613 = DIRECTION('',(0.,0.,-1.)); +#127614 = DIRECTION('',(0.613108228697,0.789998923989,0.)); +#127615 = ORIENTED_EDGE('',*,*,#127616,.T.); +#127616 = EDGE_CURVE('',#127608,#127617,#127619,.T.); +#127617 = VERTEX_POINT('',#127618); +#127618 = CARTESIAN_POINT('',(120.955356,-137.1496,1.585)); +#127619 = LINE('',#127620,#127621); +#127620 = CARTESIAN_POINT('',(121.123588,-137.233715,1.585)); +#127621 = VECTOR('',#127622,1.); +#127622 = DIRECTION('',(-0.894429317647,0.447209342181,0.)); +#127623 = ORIENTED_EDGE('',*,*,#127624,.T.); +#127624 = EDGE_CURVE('',#127617,#127625,#127627,.T.); +#127625 = VERTEX_POINT('',#127626); +#127626 = CARTESIAN_POINT('',(120.927224,-137.115321,1.585)); +#127627 = LINE('',#127628,#127629); +#127628 = CARTESIAN_POINT('',(120.955356,-137.1496,1.585)); +#127629 = VECTOR('',#127630,1.); +#127630 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#127631 = ORIENTED_EDGE('',*,*,#127632,.T.); +#127632 = EDGE_CURVE('',#127625,#127633,#127635,.T.); +#127633 = VERTEX_POINT('',#127634); +#127634 = CARTESIAN_POINT('',(120.853296,-136.960095,1.585)); +#127635 = LINE('',#127636,#127637); +#127636 = CARTESIAN_POINT('',(120.927224,-137.115321,1.585)); +#127637 = VECTOR('',#127638,1.); +#127638 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#127639 = ORIENTED_EDGE('',*,*,#127640,.T.); +#127640 = EDGE_CURVE('',#127633,#127641,#127643,.T.); +#127641 = VERTEX_POINT('',#127642); +#127642 = CARTESIAN_POINT('',(120.85,-136.937266,1.585)); +#127643 = LINE('',#127644,#127645); +#127644 = CARTESIAN_POINT('',(120.853296,-136.960095,1.585)); +#127645 = VECTOR('',#127646,1.); +#127646 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#127647 = ORIENTED_EDGE('',*,*,#127648,.T.); +#127648 = EDGE_CURVE('',#127641,#127649,#127651,.T.); +#127649 = VERTEX_POINT('',#127650); +#127650 = CARTESIAN_POINT('',(120.851921,-135.717757,1.585)); +#127651 = LINE('',#127652,#127653); +#127652 = CARTESIAN_POINT('',(120.85,-136.937266,1.585)); +#127653 = VECTOR('',#127654,1.); +#127654 = DIRECTION('',(1.575222172773E-03,0.999998759337,0.)); +#127655 = ORIENTED_EDGE('',*,*,#127656,.T.); +#127656 = EDGE_CURVE('',#127649,#127657,#127659,.T.); +#127657 = VERTEX_POINT('',#127658); +#127658 = CARTESIAN_POINT('',(120.866853,-135.681709,1.585)); +#127659 = LINE('',#127660,#127661); +#127660 = CARTESIAN_POINT('',(120.851921,-135.717757,1.585)); +#127661 = VECTOR('',#127662,1.); +#127662 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#127663 = ORIENTED_EDGE('',*,*,#127664,.T.); +#127664 = EDGE_CURVE('',#127657,#127573,#127665,.T.); +#127665 = LINE('',#127666,#127667); +#127666 = CARTESIAN_POINT('',(120.866853,-135.681709,1.585)); +#127667 = VECTOR('',#127668,1.); +#127668 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#127669 = PLANE('',#127670); +#127670 = AXIS2_PLACEMENT_3D('',#127671,#127672,#127673); +#127671 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127672 = DIRECTION('',(0.,0.,1.)); +#127673 = DIRECTION('',(1.,0.,-0.)); +#127674 = SHELL_BASED_SURFACE_MODEL('',(#127675)); +#127675 = OPEN_SHELL('',(#127676)); +#127676 = ADVANCED_FACE('',(#127677),#127747,.T.); +#127677 = FACE_BOUND('',#127678,.F.); +#127678 = EDGE_LOOP('',(#127679,#127690,#127698,#127707,#127715,#127724, + #127732,#127741)); +#127679 = ORIENTED_EDGE('',*,*,#127680,.T.); +#127680 = EDGE_CURVE('',#127681,#127683,#127685,.T.); +#127681 = VERTEX_POINT('',#127682); +#127682 = CARTESIAN_POINT('',(117.761108,-136.920786,1.585)); +#127683 = VERTEX_POINT('',#127684); +#127684 = CARTESIAN_POINT('',(117.872223,-136.920786,1.585)); +#127685 = CIRCLE('',#127686,9.999886556645E-02); +#127686 = AXIS2_PLACEMENT_3D('',#127687,#127688,#127689); +#127687 = CARTESIAN_POINT('',(117.8166655,-137.0039312783,1.585)); +#127688 = DIRECTION('',(0.,0.,-1.)); +#127689 = DIRECTION('',(-0.555581302701,0.831462215671,0.)); +#127690 = ORIENTED_EDGE('',*,*,#127691,.T.); +#127691 = EDGE_CURVE('',#127683,#127692,#127694,.T.); +#127692 = VERTEX_POINT('',#127693); +#127693 = CARTESIAN_POINT('',(117.966481,-137.015043,1.585)); +#127694 = LINE('',#127695,#127696); +#127695 = CARTESIAN_POINT('',(117.872223,-136.920786,1.585)); +#127696 = VECTOR('',#127697,1.); +#127697 = DIRECTION('',(0.707110532108,-0.707103030245,0.)); +#127698 = ORIENTED_EDGE('',*,*,#127699,.T.); +#127699 = EDGE_CURVE('',#127692,#127700,#127702,.T.); +#127700 = VERTEX_POINT('',#127701); +#127701 = CARTESIAN_POINT('',(117.96648,-137.126158,1.585)); +#127702 = CIRCLE('',#127703,0.100002409286); +#127703 = AXIS2_PLACEMENT_3D('',#127704,#127705,#127706); +#127704 = CARTESIAN_POINT('',(117.88333095967,-137.0705997516,1.585)); +#127705 = DIRECTION('',(0.,0.,-1.)); +#127706 = DIRECTION('',(0.831480370493,0.555554131913,0.)); +#127707 = ORIENTED_EDGE('',*,*,#127708,.T.); +#127708 = EDGE_CURVE('',#127700,#127709,#127711,.T.); +#127709 = VERTEX_POINT('',#127710); +#127710 = CARTESIAN_POINT('',(117.872223,-137.220414,1.585)); +#127711 = LINE('',#127712,#127713); +#127712 = CARTESIAN_POINT('',(117.96648,-137.126158,1.585)); +#127713 = VECTOR('',#127714,1.); +#127714 = DIRECTION('',(-0.707110532148,-0.707103030206,0.)); +#127715 = ORIENTED_EDGE('',*,*,#127716,.T.); +#127716 = EDGE_CURVE('',#127709,#127717,#127719,.T.); +#127717 = VERTEX_POINT('',#127718); +#127718 = CARTESIAN_POINT('',(117.761109,-137.220414,1.585)); +#127719 = CIRCLE('',#127720,0.100004132127); +#127720 = AXIS2_PLACEMENT_3D('',#127721,#127722,#127723); +#127721 = CARTESIAN_POINT('',(117.816666,-137.1372620535,1.585)); +#127722 = DIRECTION('',(-0.,0.,-1.)); +#127723 = DIRECTION('',(0.555547044091,-0.831485106182,-0.)); +#127724 = ORIENTED_EDGE('',*,*,#127725,.T.); +#127725 = EDGE_CURVE('',#127717,#127726,#127728,.T.); +#127726 = VERTEX_POINT('',#127727); +#127727 = CARTESIAN_POINT('',(117.666852,-137.126158,1.585)); +#127728 = LINE('',#127729,#127730); +#127729 = CARTESIAN_POINT('',(117.761109,-137.220414,1.585)); +#127730 = VECTOR('',#127731,1.); +#127731 = DIRECTION('',(-0.707110532148,0.707103030206,0.)); +#127732 = ORIENTED_EDGE('',*,*,#127733,.T.); +#127733 = EDGE_CURVE('',#127726,#127734,#127736,.T.); +#127734 = VERTEX_POINT('',#127735); +#127735 = CARTESIAN_POINT('',(117.666856,-137.015037,1.585)); +#127736 = CIRCLE('',#127737,9.999996998941E-02); +#127737 = AXIS2_PLACEMENT_3D('',#127738,#127739,#127740); +#127738 = CARTESIAN_POINT('',(117.74999860189,-137.0706004929,1.585)); +#127739 = DIRECTION('',(0.,0.,-1.)); +#127740 = DIRECTION('',(-0.831466268502,-0.555575237339,-0.)); +#127741 = ORIENTED_EDGE('',*,*,#127742,.T.); +#127742 = EDGE_CURVE('',#127734,#127681,#127743,.T.); +#127743 = LINE('',#127744,#127745); +#127744 = CARTESIAN_POINT('',(117.666856,-137.015037,1.585)); +#127745 = VECTOR('',#127746,1.); +#127746 = DIRECTION('',(0.707110532346,0.707103030007,0.)); +#127747 = PLANE('',#127748); +#127748 = AXIS2_PLACEMENT_3D('',#127749,#127750,#127751); +#127749 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127750 = DIRECTION('',(0.,0.,1.)); +#127751 = DIRECTION('',(1.,0.,-0.)); +#127752 = SHELL_BASED_SURFACE_MODEL('',(#127753)); +#127753 = OPEN_SHELL('',(#127754)); +#127754 = ADVANCED_FACE('',(#127755),#127921,.T.); +#127755 = FACE_BOUND('',#127756,.F.); +#127756 = EDGE_LOOP('',(#127757,#127768,#127776,#127785,#127793,#127801, + #127809,#127817,#127825,#127834,#127842,#127850,#127858,#127866, + #127874,#127882,#127890,#127899,#127907,#127915)); +#127757 = ORIENTED_EDGE('',*,*,#127758,.T.); +#127758 = EDGE_CURVE('',#127759,#127761,#127763,.T.); +#127759 = VERTEX_POINT('',#127760); +#127760 = CARTESIAN_POINT('',(118.427776,-135.654119,1.585)); +#127761 = VERTEX_POINT('',#127762); +#127762 = CARTESIAN_POINT('',(118.581412,-135.717757,1.585)); +#127763 = CIRCLE('',#127764,0.100000590676); +#127764 = AXIS2_PLACEMENT_3D('',#127765,#127766,#127767); +#127765 = CARTESIAN_POINT('',(118.483333,-135.7372666872,1.585)); +#127766 = DIRECTION('',(0.,0.,-1.)); +#127767 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#127768 = ORIENTED_EDGE('',*,*,#127769,.T.); +#127769 = EDGE_CURVE('',#127761,#127770,#127772,.T.); +#127770 = VERTEX_POINT('',#127771); +#127771 = CARTESIAN_POINT('',(118.583333,-136.142129,1.585)); +#127772 = LINE('',#127773,#127774); +#127773 = CARTESIAN_POINT('',(118.581412,-135.717757,1.585)); +#127774 = VECTOR('',#127775,1.); +#127775 = DIRECTION('',(4.526642471175E-03,-0.999989754701,0.)); +#127776 = ORIENTED_EDGE('',*,*,#127777,.T.); +#127777 = EDGE_CURVE('',#127770,#127778,#127780,.T.); +#127778 = VERTEX_POINT('',#127779); +#127779 = CARTESIAN_POINT('',(118.928055,-136.11449,1.585)); +#127780 = CIRCLE('',#127781,0.392597731157); +#127781 = AXIS2_PLACEMENT_3D('',#127782,#127783,#127784); +#127782 = CARTESIAN_POINT('',(118.78386365681,-136.4796500129,1.585)); +#127783 = DIRECTION('',(0.,0.,-1.)); +#127784 = DIRECTION('',(-0.510778949809,0.859712082288,0.)); +#127785 = ORIENTED_EDGE('',*,*,#127786,.T.); +#127786 = EDGE_CURVE('',#127778,#127787,#127789,.T.); +#127787 = VERTEX_POINT('',#127788); +#127788 = CARTESIAN_POINT('',(119.077978,-136.1916,1.585)); +#127789 = LINE('',#127790,#127791); +#127790 = CARTESIAN_POINT('',(118.928055,-136.11449,1.585)); +#127791 = VECTOR('',#127792,1.); +#127792 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#127793 = ORIENTED_EDGE('',*,*,#127794,.T.); +#127794 = EDGE_CURVE('',#127787,#127795,#127797,.T.); +#127795 = VERTEX_POINT('',#127796); +#127796 = CARTESIAN_POINT('',(119.106109,-136.225878,1.585)); +#127797 = LINE('',#127798,#127799); +#127798 = CARTESIAN_POINT('',(119.077978,-136.1916,1.585)); +#127799 = VECTOR('',#127800,1.); +#127800 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#127801 = ORIENTED_EDGE('',*,*,#127802,.T.); +#127802 = EDGE_CURVE('',#127795,#127803,#127805,.T.); +#127803 = VERTEX_POINT('',#127804); +#127804 = CARTESIAN_POINT('',(119.180036,-136.381103,1.585)); +#127805 = LINE('',#127806,#127807); +#127806 = CARTESIAN_POINT('',(119.106109,-136.225878,1.585)); +#127807 = VECTOR('',#127808,1.); +#127808 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#127809 = ORIENTED_EDGE('',*,*,#127810,.T.); +#127810 = EDGE_CURVE('',#127803,#127811,#127813,.T.); +#127811 = VERTEX_POINT('',#127812); +#127812 = CARTESIAN_POINT('',(119.183333,-136.403933,1.585)); +#127813 = LINE('',#127814,#127815); +#127814 = CARTESIAN_POINT('',(119.180036,-136.381103,1.585)); +#127815 = VECTOR('',#127816,1.); +#127816 = DIRECTION('',(0.142932451763,-0.989732445782,0.)); +#127817 = ORIENTED_EDGE('',*,*,#127818,.T.); +#127818 = EDGE_CURVE('',#127811,#127819,#127821,.T.); +#127819 = VERTEX_POINT('',#127820); +#127820 = CARTESIAN_POINT('',(119.181412,-137.156775,1.585)); +#127821 = LINE('',#127822,#127823); +#127822 = CARTESIAN_POINT('',(119.183333,-136.403933,1.585)); +#127823 = VECTOR('',#127824,1.); +#127824 = DIRECTION('',(-2.551655920146E-03,-0.999996744521,0.)); +#127825 = ORIENTED_EDGE('',*,*,#127826,.T.); +#127826 = EDGE_CURVE('',#127819,#127827,#127829,.T.); +#127827 = VERTEX_POINT('',#127828); +#127828 = CARTESIAN_POINT('',(118.985254,-137.156775,1.585)); +#127829 = CIRCLE('',#127830,0.100000456609); +#127830 = AXIS2_PLACEMENT_3D('',#127831,#127832,#127833); +#127831 = CARTESIAN_POINT('',(119.083333,-137.137266,1.585)); +#127832 = DIRECTION('',(-0.,0.,-1.)); +#127833 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#127834 = ORIENTED_EDGE('',*,*,#127835,.T.); +#127835 = EDGE_CURVE('',#127827,#127836,#127838,.T.); +#127836 = VERTEX_POINT('',#127837); +#127837 = CARTESIAN_POINT('',(118.983333,-136.427541,1.585)); +#127838 = LINE('',#127839,#127840); +#127839 = CARTESIAN_POINT('',(118.985254,-137.156775,1.585)); +#127840 = VECTOR('',#127841,1.); +#127841 = DIRECTION('',(-2.634261889534E-03,0.999996530326,0.)); +#127842 = ORIENTED_EDGE('',*,*,#127843,.T.); +#127843 = EDGE_CURVE('',#127836,#127844,#127846,.T.); +#127844 = VERTEX_POINT('',#127845); +#127845 = CARTESIAN_POINT('',(118.94213,-136.345135,1.585)); +#127846 = LINE('',#127847,#127848); +#127847 = CARTESIAN_POINT('',(118.983333,-136.427541,1.585)); +#127848 = VECTOR('',#127849,1.); +#127849 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#127850 = ORIENTED_EDGE('',*,*,#127851,.T.); +#127851 = EDGE_CURVE('',#127844,#127852,#127854,.T.); +#127852 = VERTEX_POINT('',#127853); +#127853 = CARTESIAN_POINT('',(118.859725,-136.303933,1.585)); +#127854 = LINE('',#127855,#127856); +#127855 = CARTESIAN_POINT('',(118.94213,-136.345135,1.585)); +#127856 = VECTOR('',#127857,1.); +#127857 = DIRECTION('',(-0.894429361803,0.447209253868,0.)); +#127858 = ORIENTED_EDGE('',*,*,#127859,.T.); +#127859 = EDGE_CURVE('',#127852,#127860,#127862,.T.); +#127860 = VERTEX_POINT('',#127861); +#127861 = CARTESIAN_POINT('',(118.706941,-136.303933,1.585)); +#127862 = LINE('',#127863,#127864); +#127863 = CARTESIAN_POINT('',(118.859725,-136.303933,1.585)); +#127864 = VECTOR('',#127865,1.); +#127865 = DIRECTION('',(-1.,0.,0.)); +#127866 = ORIENTED_EDGE('',*,*,#127867,.T.); +#127867 = EDGE_CURVE('',#127860,#127868,#127870,.T.); +#127868 = VERTEX_POINT('',#127869); +#127869 = CARTESIAN_POINT('',(118.609233,-136.352787,1.585)); +#127870 = LINE('',#127871,#127872); +#127871 = CARTESIAN_POINT('',(118.706941,-136.303933,1.585)); +#127872 = VECTOR('',#127873,1.); +#127873 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#127874 = ORIENTED_EDGE('',*,*,#127875,.T.); +#127875 = EDGE_CURVE('',#127868,#127876,#127878,.T.); +#127876 = VERTEX_POINT('',#127877); +#127877 = CARTESIAN_POINT('',(118.583333,-136.378687,1.585)); +#127878 = LINE('',#127879,#127880); +#127879 = CARTESIAN_POINT('',(118.609233,-136.352787,1.585)); +#127880 = VECTOR('',#127881,1.); +#127881 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#127882 = ORIENTED_EDGE('',*,*,#127883,.T.); +#127883 = EDGE_CURVE('',#127876,#127884,#127886,.T.); +#127884 = VERTEX_POINT('',#127885); +#127885 = CARTESIAN_POINT('',(118.581412,-137.156775,1.585)); +#127886 = LINE('',#127887,#127888); +#127887 = CARTESIAN_POINT('',(118.583333,-136.378687,1.585)); +#127888 = VECTOR('',#127889,1.); +#127889 = DIRECTION('',(-2.468864891191E-03,-0.999996952348,0.)); +#127890 = ORIENTED_EDGE('',*,*,#127891,.T.); +#127891 = EDGE_CURVE('',#127884,#127892,#127894,.T.); +#127892 = VERTEX_POINT('',#127893); +#127893 = CARTESIAN_POINT('',(118.385254,-137.156775,1.585)); +#127894 = CIRCLE('',#127895,0.100000456609); +#127895 = AXIS2_PLACEMENT_3D('',#127896,#127897,#127898); +#127896 = CARTESIAN_POINT('',(118.483333,-137.137266,1.585)); +#127897 = DIRECTION('',(-0.,0.,-1.)); +#127898 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#127899 = ORIENTED_EDGE('',*,*,#127900,.T.); +#127900 = EDGE_CURVE('',#127892,#127901,#127903,.T.); +#127901 = VERTEX_POINT('',#127902); +#127902 = CARTESIAN_POINT('',(118.385254,-135.717757,1.585)); +#127903 = LINE('',#127904,#127905); +#127904 = CARTESIAN_POINT('',(118.385254,-137.156775,1.585)); +#127905 = VECTOR('',#127906,1.); +#127906 = DIRECTION('',(0.,1.,0.)); +#127907 = ORIENTED_EDGE('',*,*,#127908,.T.); +#127908 = EDGE_CURVE('',#127901,#127909,#127911,.T.); +#127909 = VERTEX_POINT('',#127910); +#127910 = CARTESIAN_POINT('',(118.400186,-135.681709,1.585)); +#127911 = LINE('',#127912,#127913); +#127912 = CARTESIAN_POINT('',(118.385254,-135.717757,1.585)); +#127913 = VECTOR('',#127914,1.); +#127914 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#127915 = ORIENTED_EDGE('',*,*,#127916,.T.); +#127916 = EDGE_CURVE('',#127909,#127759,#127917,.T.); +#127917 = LINE('',#127918,#127919); +#127918 = CARTESIAN_POINT('',(118.400186,-135.681709,1.585)); +#127919 = VECTOR('',#127920,1.); +#127920 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#127921 = PLANE('',#127922); +#127922 = AXIS2_PLACEMENT_3D('',#127923,#127924,#127925); +#127923 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127924 = DIRECTION('',(0.,0.,1.)); +#127925 = DIRECTION('',(1.,0.,-0.)); +#127926 = SHELL_BASED_SURFACE_MODEL('',(#127927)); +#127927 = OPEN_SHELL('',(#127928)); +#127928 = ADVANCED_FACE('',(#127929),#128102,.T.); +#127929 = FACE_BOUND('',#127930,.F.); +#127930 = EDGE_LOOP('',(#127931,#127942,#127950,#127958,#127966,#127974, + #127982,#127990,#127998,#128006,#128015,#128023,#128031,#128039, + #128047,#128055,#128063,#128071,#128080,#128088,#128096)); +#127931 = ORIENTED_EDGE('',*,*,#127932,.T.); +#127932 = EDGE_CURVE('',#127933,#127935,#127937,.T.); +#127933 = VERTEX_POINT('',#127934); +#127934 = CARTESIAN_POINT('',(124.094443,-136.120786,1.585)); +#127935 = VERTEX_POINT('',#127936); +#127936 = CARTESIAN_POINT('',(124.233894,-136.150181,1.585)); +#127937 = CIRCLE('',#127938,9.940146468379E-02); +#127938 = AXIS2_PLACEMENT_3D('',#127939,#127940,#127941); +#127939 = CARTESIAN_POINT('',(124.14987405192,-136.2032969063,1.585)); +#127940 = DIRECTION('',(0.,0.,-1.)); +#127941 = DIRECTION('',(-0.557648240859,0.830077369567,0.)); +#127942 = ORIENTED_EDGE('',*,*,#127943,.T.); +#127943 = EDGE_CURVE('',#127935,#127944,#127946,.T.); +#127944 = VERTEX_POINT('',#127945); +#127945 = CARTESIAN_POINT('',(124.330491,-136.105854,1.585)); +#127946 = LINE('',#127947,#127948); +#127947 = CARTESIAN_POINT('',(124.233894,-136.150181,1.585)); +#127948 = VECTOR('',#127949,1.); +#127949 = DIRECTION('',(0.908874511162,0.417069685977,0.)); +#127950 = ORIENTED_EDGE('',*,*,#127951,.T.); +#127951 = EDGE_CURVE('',#127944,#127952,#127954,.T.); +#127952 = VERTEX_POINT('',#127953); +#127953 = CARTESIAN_POINT('',(124.569509,-136.105854,1.585)); +#127954 = LINE('',#127955,#127956); +#127955 = CARTESIAN_POINT('',(124.330491,-136.105854,1.585)); +#127956 = VECTOR('',#127957,1.); +#127957 = DIRECTION('',(1.,0.,0.)); +#127958 = ORIENTED_EDGE('',*,*,#127959,.T.); +#127959 = EDGE_CURVE('',#127952,#127960,#127962,.T.); +#127960 = VERTEX_POINT('',#127961); +#127961 = CARTESIAN_POINT('',(124.594722,-136.11449,1.585)); +#127962 = LINE('',#127963,#127964); +#127963 = CARTESIAN_POINT('',(124.569509,-136.105854,1.585)); +#127964 = VECTOR('',#127965,1.); +#127965 = DIRECTION('',(0.946043257817,-0.32404035912,0.)); +#127966 = ORIENTED_EDGE('',*,*,#127967,.T.); +#127967 = EDGE_CURVE('',#127960,#127968,#127970,.T.); +#127968 = VERTEX_POINT('',#127969); +#127969 = CARTESIAN_POINT('',(124.744645,-136.1916,1.585)); +#127970 = LINE('',#127971,#127972); +#127971 = CARTESIAN_POINT('',(124.594722,-136.11449,1.585)); +#127972 = VECTOR('',#127973,1.); +#127973 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#127974 = ORIENTED_EDGE('',*,*,#127975,.T.); +#127975 = EDGE_CURVE('',#127968,#127976,#127978,.T.); +#127976 = VERTEX_POINT('',#127977); +#127977 = CARTESIAN_POINT('',(124.772776,-136.225878,1.585)); +#127978 = LINE('',#127979,#127980); +#127979 = CARTESIAN_POINT('',(124.744645,-136.1916,1.585)); +#127980 = VECTOR('',#127981,1.); +#127981 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#127982 = ORIENTED_EDGE('',*,*,#127983,.T.); +#127983 = EDGE_CURVE('',#127976,#127984,#127986,.T.); +#127984 = VERTEX_POINT('',#127985); +#127985 = CARTESIAN_POINT('',(124.846703,-136.381103,1.585)); +#127986 = LINE('',#127987,#127988); +#127987 = CARTESIAN_POINT('',(124.772776,-136.225878,1.585)); +#127988 = VECTOR('',#127989,1.); +#127989 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#127990 = ORIENTED_EDGE('',*,*,#127991,.T.); +#127991 = EDGE_CURVE('',#127984,#127992,#127994,.T.); +#127992 = VERTEX_POINT('',#127993); +#127993 = CARTESIAN_POINT('',(124.85,-136.403933,1.585)); +#127994 = LINE('',#127995,#127996); +#127995 = CARTESIAN_POINT('',(124.846703,-136.381103,1.585)); +#127996 = VECTOR('',#127997,1.); +#127997 = DIRECTION('',(0.142932451762,-0.989732445782,0.)); +#127998 = ORIENTED_EDGE('',*,*,#127999,.T.); +#127999 = EDGE_CURVE('',#127992,#128000,#128002,.T.); +#128000 = VERTEX_POINT('',#128001); +#128001 = CARTESIAN_POINT('',(124.848079,-137.156775,1.585)); +#128002 = LINE('',#128003,#128004); +#128003 = CARTESIAN_POINT('',(124.85,-136.403933,1.585)); +#128004 = VECTOR('',#128005,1.); +#128005 = DIRECTION('',(-2.551655920127E-03,-0.999996744521,0.)); +#128006 = ORIENTED_EDGE('',*,*,#128007,.T.); +#128007 = EDGE_CURVE('',#128000,#128008,#128010,.T.); +#128008 = VERTEX_POINT('',#128009); +#128009 = CARTESIAN_POINT('',(124.651921,-137.156775,1.585)); +#128010 = CIRCLE('',#128011,0.100000456609); +#128011 = AXIS2_PLACEMENT_3D('',#128012,#128013,#128014); +#128012 = CARTESIAN_POINT('',(124.75,-137.137266,1.585)); +#128013 = DIRECTION('',(-0.,0.,-1.)); +#128014 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128015 = ORIENTED_EDGE('',*,*,#128016,.T.); +#128016 = EDGE_CURVE('',#128008,#128017,#128019,.T.); +#128017 = VERTEX_POINT('',#128018); +#128018 = CARTESIAN_POINT('',(124.65,-136.427541,1.585)); +#128019 = LINE('',#128020,#128021); +#128020 = CARTESIAN_POINT('',(124.651921,-137.156775,1.585)); +#128021 = VECTOR('',#128022,1.); +#128022 = DIRECTION('',(-2.634261889534E-03,0.999996530326,0.)); +#128023 = ORIENTED_EDGE('',*,*,#128024,.T.); +#128024 = EDGE_CURVE('',#128017,#128025,#128027,.T.); +#128025 = VERTEX_POINT('',#128026); +#128026 = CARTESIAN_POINT('',(124.608797,-136.345135,1.585)); +#128027 = LINE('',#128028,#128029); +#128028 = CARTESIAN_POINT('',(124.65,-136.427541,1.585)); +#128029 = VECTOR('',#128030,1.); +#128030 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#128031 = ORIENTED_EDGE('',*,*,#128032,.T.); +#128032 = EDGE_CURVE('',#128025,#128033,#128035,.T.); +#128033 = VERTEX_POINT('',#128034); +#128034 = CARTESIAN_POINT('',(124.526392,-136.303933,1.585)); +#128035 = LINE('',#128036,#128037); +#128036 = CARTESIAN_POINT('',(124.608797,-136.345135,1.585)); +#128037 = VECTOR('',#128038,1.); +#128038 = DIRECTION('',(-0.894429361803,0.447209253868,0.)); +#128039 = ORIENTED_EDGE('',*,*,#128040,.T.); +#128040 = EDGE_CURVE('',#128033,#128041,#128043,.T.); +#128041 = VERTEX_POINT('',#128042); +#128042 = CARTESIAN_POINT('',(124.373608,-136.303933,1.585)); +#128043 = LINE('',#128044,#128045); +#128044 = CARTESIAN_POINT('',(124.526392,-136.303933,1.585)); +#128045 = VECTOR('',#128046,1.); +#128046 = DIRECTION('',(-1.,0.,0.)); +#128047 = ORIENTED_EDGE('',*,*,#128048,.T.); +#128048 = EDGE_CURVE('',#128041,#128049,#128051,.T.); +#128049 = VERTEX_POINT('',#128050); +#128050 = CARTESIAN_POINT('',(124.2759,-136.352787,1.585)); +#128051 = LINE('',#128052,#128053); +#128052 = CARTESIAN_POINT('',(124.373608,-136.303933,1.585)); +#128053 = VECTOR('',#128054,1.); +#128054 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#128055 = ORIENTED_EDGE('',*,*,#128056,.T.); +#128056 = EDGE_CURVE('',#128049,#128057,#128059,.T.); +#128057 = VERTEX_POINT('',#128058); +#128058 = CARTESIAN_POINT('',(124.25,-136.378687,1.585)); +#128059 = LINE('',#128060,#128061); +#128060 = CARTESIAN_POINT('',(124.2759,-136.352787,1.585)); +#128061 = VECTOR('',#128062,1.); +#128062 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#128063 = ORIENTED_EDGE('',*,*,#128064,.T.); +#128064 = EDGE_CURVE('',#128057,#128065,#128067,.T.); +#128065 = VERTEX_POINT('',#128066); +#128066 = CARTESIAN_POINT('',(124.248079,-137.156775,1.585)); +#128067 = LINE('',#128068,#128069); +#128068 = CARTESIAN_POINT('',(124.25,-136.378687,1.585)); +#128069 = VECTOR('',#128070,1.); +#128070 = DIRECTION('',(-2.468864891191E-03,-0.999996952348,0.)); +#128071 = ORIENTED_EDGE('',*,*,#128072,.T.); +#128072 = EDGE_CURVE('',#128065,#128073,#128075,.T.); +#128073 = VERTEX_POINT('',#128074); +#128074 = CARTESIAN_POINT('',(124.051921,-137.156775,1.585)); +#128075 = CIRCLE('',#128076,0.100000456609); +#128076 = AXIS2_PLACEMENT_3D('',#128077,#128078,#128079); +#128077 = CARTESIAN_POINT('',(124.15,-137.137266,1.585)); +#128078 = DIRECTION('',(-0.,0.,-1.)); +#128079 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128080 = ORIENTED_EDGE('',*,*,#128081,.T.); +#128081 = EDGE_CURVE('',#128073,#128082,#128084,.T.); +#128082 = VERTEX_POINT('',#128083); +#128083 = CARTESIAN_POINT('',(124.051921,-136.184424,1.585)); +#128084 = LINE('',#128085,#128086); +#128085 = CARTESIAN_POINT('',(124.051921,-137.156775,1.585)); +#128086 = VECTOR('',#128087,1.); +#128087 = DIRECTION('',(0.,1.,0.)); +#128088 = ORIENTED_EDGE('',*,*,#128089,.T.); +#128089 = EDGE_CURVE('',#128082,#128090,#128092,.T.); +#128090 = VERTEX_POINT('',#128091); +#128091 = CARTESIAN_POINT('',(124.066853,-136.148376,1.585)); +#128092 = LINE('',#128093,#128094); +#128093 = CARTESIAN_POINT('',(124.051921,-136.184424,1.585)); +#128094 = VECTOR('',#128095,1.); +#128095 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#128096 = ORIENTED_EDGE('',*,*,#128097,.T.); +#128097 = EDGE_CURVE('',#128090,#127933,#128098,.T.); +#128098 = LINE('',#128099,#128100); +#128099 = CARTESIAN_POINT('',(124.066853,-136.148376,1.585)); +#128100 = VECTOR('',#128101,1.); +#128101 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128102 = PLANE('',#128103); +#128103 = AXIS2_PLACEMENT_3D('',#128104,#128105,#128106); +#128104 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128105 = DIRECTION('',(0.,0.,1.)); +#128106 = DIRECTION('',(1.,0.,-0.)); +#128107 = SHELL_BASED_SURFACE_MODEL('',(#128108)); +#128108 = OPEN_SHELL('',(#128109)); +#128109 = ADVANCED_FACE('',(#128110),#128180,.T.); +#128110 = FACE_BOUND('',#128111,.F.); +#128111 = EDGE_LOOP('',(#128112,#128123,#128131,#128140,#128148,#128157, + #128165,#128174)); +#128112 = ORIENTED_EDGE('',*,*,#128113,.T.); +#128113 = EDGE_CURVE('',#128114,#128116,#128118,.T.); +#128114 = VERTEX_POINT('',#128115); +#128115 = CARTESIAN_POINT('',(125.361109,-136.920786,1.585)); +#128116 = VERTEX_POINT('',#128117); +#128117 = CARTESIAN_POINT('',(125.472224,-136.920786,1.585)); +#128118 = CIRCLE('',#128119,9.999886556645E-02); +#128119 = AXIS2_PLACEMENT_3D('',#128120,#128121,#128122); +#128120 = CARTESIAN_POINT('',(125.4166665,-137.0039312783,1.585)); +#128121 = DIRECTION('',(0.,0.,-1.)); +#128122 = DIRECTION('',(-0.555581302701,0.831462215672,0.)); +#128123 = ORIENTED_EDGE('',*,*,#128124,.T.); +#128124 = EDGE_CURVE('',#128116,#128125,#128127,.T.); +#128125 = VERTEX_POINT('',#128126); +#128126 = CARTESIAN_POINT('',(125.566482,-137.015043,1.585)); +#128127 = LINE('',#128128,#128129); +#128128 = CARTESIAN_POINT('',(125.472224,-136.920786,1.585)); +#128129 = VECTOR('',#128130,1.); +#128130 = DIRECTION('',(0.707110532108,-0.707103030245,0.)); +#128131 = ORIENTED_EDGE('',*,*,#128132,.T.); +#128132 = EDGE_CURVE('',#128125,#128133,#128135,.T.); +#128133 = VERTEX_POINT('',#128134); +#128134 = CARTESIAN_POINT('',(125.566481,-137.126158,1.585)); +#128135 = CIRCLE('',#128136,0.100002409286); +#128136 = AXIS2_PLACEMENT_3D('',#128137,#128138,#128139); +#128137 = CARTESIAN_POINT('',(125.48333195967,-137.0705997516,1.585)); +#128138 = DIRECTION('',(0.,0.,-1.)); +#128139 = DIRECTION('',(0.831480370493,0.555554131913,0.)); +#128140 = ORIENTED_EDGE('',*,*,#128141,.T.); +#128141 = EDGE_CURVE('',#128133,#128142,#128144,.T.); +#128142 = VERTEX_POINT('',#128143); +#128143 = CARTESIAN_POINT('',(125.472224,-137.220414,1.585)); +#128144 = LINE('',#128145,#128146); +#128145 = CARTESIAN_POINT('',(125.566481,-137.126158,1.585)); +#128146 = VECTOR('',#128147,1.); +#128147 = DIRECTION('',(-0.707110532148,-0.707103030206,0.)); +#128148 = ORIENTED_EDGE('',*,*,#128149,.T.); +#128149 = EDGE_CURVE('',#128142,#128150,#128152,.T.); +#128150 = VERTEX_POINT('',#128151); +#128151 = CARTESIAN_POINT('',(125.36111,-137.220414,1.585)); +#128152 = CIRCLE('',#128153,0.100004132127); +#128153 = AXIS2_PLACEMENT_3D('',#128154,#128155,#128156); +#128154 = CARTESIAN_POINT('',(125.416667,-137.1372620535,1.585)); +#128155 = DIRECTION('',(-0.,0.,-1.)); +#128156 = DIRECTION('',(0.555547044091,-0.831485106182,-0.)); +#128157 = ORIENTED_EDGE('',*,*,#128158,.T.); +#128158 = EDGE_CURVE('',#128150,#128159,#128161,.T.); +#128159 = VERTEX_POINT('',#128160); +#128160 = CARTESIAN_POINT('',(125.266853,-137.126158,1.585)); +#128161 = LINE('',#128162,#128163); +#128162 = CARTESIAN_POINT('',(125.36111,-137.220414,1.585)); +#128163 = VECTOR('',#128164,1.); +#128164 = DIRECTION('',(-0.707110532148,0.707103030206,0.)); +#128165 = ORIENTED_EDGE('',*,*,#128166,.T.); +#128166 = EDGE_CURVE('',#128159,#128167,#128169,.T.); +#128167 = VERTEX_POINT('',#128168); +#128168 = CARTESIAN_POINT('',(125.266857,-137.015037,1.585)); +#128169 = CIRCLE('',#128170,9.999996998938E-02); +#128170 = AXIS2_PLACEMENT_3D('',#128171,#128172,#128173); +#128171 = CARTESIAN_POINT('',(125.34999960189,-137.0706004929,1.585)); +#128172 = DIRECTION('',(0.,0.,-1.)); +#128173 = DIRECTION('',(-0.831466268502,-0.555575237339,-0.)); +#128174 = ORIENTED_EDGE('',*,*,#128175,.T.); +#128175 = EDGE_CURVE('',#128167,#128114,#128176,.T.); +#128176 = LINE('',#128177,#128178); +#128177 = CARTESIAN_POINT('',(125.266857,-137.015037,1.585)); +#128178 = VECTOR('',#128179,1.); +#128179 = DIRECTION('',(0.707110532346,0.707103030007,0.)); +#128180 = PLANE('',#128181); +#128181 = AXIS2_PLACEMENT_3D('',#128182,#128183,#128184); +#128182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128183 = DIRECTION('',(0.,0.,1.)); +#128184 = DIRECTION('',(1.,0.,-0.)); +#128185 = SHELL_BASED_SURFACE_MODEL('',(#128186)); +#128186 = OPEN_SHELL('',(#128187)); +#128187 = ADVANCED_FACE('',(#128188),#128378,.T.); +#128188 = FACE_BOUND('',#128189,.F.); +#128189 = EDGE_LOOP('',(#128190,#128201,#128209,#128217,#128226,#128234, + #128242,#128250,#128258,#128266,#128275,#128283,#128291,#128299, + #128307,#128315,#128323,#128331,#128339,#128348,#128356,#128364, + #128372)); +#128190 = ORIENTED_EDGE('',*,*,#128191,.T.); +#128191 = EDGE_CURVE('',#128192,#128194,#128196,.T.); +#128192 = VERTEX_POINT('',#128193); +#128193 = CARTESIAN_POINT('',(126.027777,-135.654119,1.585)); +#128194 = VERTEX_POINT('',#128195); +#128195 = CARTESIAN_POINT('',(126.181413,-135.717757,1.585)); +#128196 = CIRCLE('',#128197,0.100000590676); +#128197 = AXIS2_PLACEMENT_3D('',#128198,#128199,#128200); +#128198 = CARTESIAN_POINT('',(126.083334,-135.7372666872,1.585)); +#128199 = DIRECTION('',(0.,0.,-1.)); +#128200 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#128201 = ORIENTED_EDGE('',*,*,#128202,.T.); +#128202 = EDGE_CURVE('',#128194,#128203,#128205,.T.); +#128203 = VERTEX_POINT('',#128204); +#128204 = CARTESIAN_POINT('',(126.183334,-136.103933,1.585)); +#128205 = LINE('',#128206,#128207); +#128206 = CARTESIAN_POINT('',(126.181413,-135.717757,1.585)); +#128207 = VECTOR('',#128208,1.); +#128208 = DIRECTION('',(4.974354266045E-03,-0.999987627823,0.)); +#128209 = ORIENTED_EDGE('',*,*,#128210,.T.); +#128210 = EDGE_CURVE('',#128203,#128211,#128213,.T.); +#128211 = VERTEX_POINT('',#128212); +#128212 = CARTESIAN_POINT('',(126.436176,-136.105854,1.585)); +#128213 = LINE('',#128214,#128215); +#128214 = CARTESIAN_POINT('',(126.183334,-136.103933,1.585)); +#128215 = VECTOR('',#128216,1.); +#128216 = DIRECTION('',(0.999971139258,-7.597410867243E-03,0.)); +#128217 = ORIENTED_EDGE('',*,*,#128218,.T.); +#128218 = EDGE_CURVE('',#128211,#128219,#128221,.T.); +#128219 = VERTEX_POINT('',#128220); +#128220 = CARTESIAN_POINT('',(126.436176,-136.302012,1.585)); +#128221 = CIRCLE('',#128222,0.100000456609); +#128222 = AXIS2_PLACEMENT_3D('',#128223,#128224,#128225); +#128223 = CARTESIAN_POINT('',(126.416667,-136.203933,1.585)); +#128224 = DIRECTION('',(0.,0.,-1.)); +#128225 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#128226 = ORIENTED_EDGE('',*,*,#128227,.T.); +#128227 = EDGE_CURVE('',#128219,#128228,#128230,.T.); +#128228 = VERTEX_POINT('',#128229); +#128229 = CARTESIAN_POINT('',(126.183334,-136.303933,1.585)); +#128230 = LINE('',#128231,#128232); +#128231 = CARTESIAN_POINT('',(126.436176,-136.302012,1.585)); +#128232 = VECTOR('',#128233,1.); +#128233 = DIRECTION('',(-0.999971139258,-7.597410867355E-03,0.)); +#128234 = ORIENTED_EDGE('',*,*,#128235,.T.); +#128235 = EDGE_CURVE('',#128228,#128236,#128238,.T.); +#128236 = VERTEX_POINT('',#128237); +#128237 = CARTESIAN_POINT('',(126.183334,-136.913659,1.585)); +#128238 = LINE('',#128239,#128240); +#128239 = CARTESIAN_POINT('',(126.183334,-136.303933,1.585)); +#128240 = VECTOR('',#128241,1.); +#128241 = DIRECTION('',(0.,-1.,0.)); +#128242 = ORIENTED_EDGE('',*,*,#128243,.T.); +#128243 = EDGE_CURVE('',#128236,#128244,#128246,.T.); +#128244 = VERTEX_POINT('',#128245); +#128245 = CARTESIAN_POINT('',(126.224536,-136.996064,1.585)); +#128246 = LINE('',#128247,#128248); +#128247 = CARTESIAN_POINT('',(126.183334,-136.913659,1.585)); +#128248 = VECTOR('',#128249,1.); +#128249 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#128250 = ORIENTED_EDGE('',*,*,#128251,.T.); +#128251 = EDGE_CURVE('',#128244,#128252,#128254,.T.); +#128252 = VERTEX_POINT('',#128253); +#128253 = CARTESIAN_POINT('',(126.306941,-137.037266,1.585)); +#128254 = LINE('',#128255,#128256); +#128255 = CARTESIAN_POINT('',(126.224536,-136.996064,1.585)); +#128256 = VECTOR('',#128257,1.); +#128257 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#128258 = ORIENTED_EDGE('',*,*,#128259,.T.); +#128259 = EDGE_CURVE('',#128252,#128260,#128262,.T.); +#128260 = VERTEX_POINT('',#128261); +#128261 = CARTESIAN_POINT('',(126.436176,-137.039187,1.585)); +#128262 = LINE('',#128263,#128264); +#128263 = CARTESIAN_POINT('',(126.306941,-137.037266,1.585)); +#128264 = VECTOR('',#128265,1.); +#128265 = DIRECTION('',(0.999889543194,-1.486275244699E-02,0.)); +#128266 = ORIENTED_EDGE('',*,*,#128267,.T.); +#128267 = EDGE_CURVE('',#128260,#128268,#128270,.T.); +#128268 = VERTEX_POINT('',#128269); +#128269 = CARTESIAN_POINT('',(126.436176,-137.235345,1.585)); +#128270 = CIRCLE('',#128271,0.100000456609); +#128271 = AXIS2_PLACEMENT_3D('',#128272,#128273,#128274); +#128272 = CARTESIAN_POINT('',(126.416667,-137.137266,1.585)); +#128273 = DIRECTION('',(0.,0.,-1.)); +#128274 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#128275 = ORIENTED_EDGE('',*,*,#128276,.T.); +#128276 = EDGE_CURVE('',#128268,#128277,#128279,.T.); +#128277 = VERTEX_POINT('',#128278); +#128278 = CARTESIAN_POINT('',(126.263825,-137.235345,1.585)); +#128279 = LINE('',#128280,#128281); +#128280 = CARTESIAN_POINT('',(126.436176,-137.235345,1.585)); +#128281 = VECTOR('',#128282,1.); +#128282 = DIRECTION('',(-1.,0.,0.)); +#128283 = ORIENTED_EDGE('',*,*,#128284,.T.); +#128284 = EDGE_CURVE('',#128277,#128285,#128287,.T.); +#128285 = VERTEX_POINT('',#128286); +#128286 = CARTESIAN_POINT('',(126.238613,-137.226709,1.585)); +#128287 = LINE('',#128288,#128289); +#128288 = CARTESIAN_POINT('',(126.263825,-137.235345,1.585)); +#128289 = VECTOR('',#128290,1.); +#128290 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#128291 = ORIENTED_EDGE('',*,*,#128292,.T.); +#128292 = EDGE_CURVE('',#128285,#128293,#128295,.T.); +#128293 = VERTEX_POINT('',#128294); +#128294 = CARTESIAN_POINT('',(126.08869,-137.1496,1.585)); +#128295 = LINE('',#128296,#128297); +#128296 = CARTESIAN_POINT('',(126.238613,-137.226709,1.585)); +#128297 = VECTOR('',#128298,1.); +#128298 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#128299 = ORIENTED_EDGE('',*,*,#128300,.T.); +#128300 = EDGE_CURVE('',#128293,#128301,#128303,.T.); +#128301 = VERTEX_POINT('',#128302); +#128302 = CARTESIAN_POINT('',(126.060558,-137.115321,1.585)); +#128303 = LINE('',#128304,#128305); +#128304 = CARTESIAN_POINT('',(126.08869,-137.1496,1.585)); +#128305 = VECTOR('',#128306,1.); +#128306 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#128307 = ORIENTED_EDGE('',*,*,#128308,.T.); +#128308 = EDGE_CURVE('',#128301,#128309,#128311,.T.); +#128309 = VERTEX_POINT('',#128310); +#128310 = CARTESIAN_POINT('',(125.98663,-136.960095,1.585)); +#128311 = LINE('',#128312,#128313); +#128312 = CARTESIAN_POINT('',(126.060558,-137.115321,1.585)); +#128313 = VECTOR('',#128314,1.); +#128314 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#128315 = ORIENTED_EDGE('',*,*,#128316,.T.); +#128316 = EDGE_CURVE('',#128309,#128317,#128319,.T.); +#128317 = VERTEX_POINT('',#128318); +#128318 = CARTESIAN_POINT('',(125.983334,-136.937266,1.585)); +#128319 = LINE('',#128320,#128321); +#128320 = CARTESIAN_POINT('',(125.98663,-136.960095,1.585)); +#128321 = VECTOR('',#128322,1.); +#128322 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#128323 = ORIENTED_EDGE('',*,*,#128324,.T.); +#128324 = EDGE_CURVE('',#128317,#128325,#128327,.T.); +#128325 = VERTEX_POINT('',#128326); +#128326 = CARTESIAN_POINT('',(125.983334,-136.303933,1.585)); +#128327 = LINE('',#128328,#128329); +#128328 = CARTESIAN_POINT('',(125.983334,-136.937266,1.585)); +#128329 = VECTOR('',#128330,1.); +#128330 = DIRECTION('',(0.,1.,0.)); +#128331 = ORIENTED_EDGE('',*,*,#128332,.T.); +#128332 = EDGE_CURVE('',#128325,#128333,#128335,.T.); +#128333 = VERTEX_POINT('',#128334); +#128334 = CARTESIAN_POINT('',(125.863825,-136.302012,1.585)); +#128335 = LINE('',#128336,#128337); +#128336 = CARTESIAN_POINT('',(125.983334,-136.303933,1.585)); +#128337 = VECTOR('',#128338,1.); +#128338 = DIRECTION('',(-0.999870836632,1.60720270204E-02,0.)); +#128339 = ORIENTED_EDGE('',*,*,#128340,.T.); +#128340 = EDGE_CURVE('',#128333,#128341,#128343,.T.); +#128341 = VERTEX_POINT('',#128342); +#128342 = CARTESIAN_POINT('',(125.863825,-136.105854,1.585)); +#128343 = CIRCLE('',#128344,0.100000456609); +#128344 = AXIS2_PLACEMENT_3D('',#128345,#128346,#128347); +#128345 = CARTESIAN_POINT('',(125.883334,-136.203933,1.585)); +#128346 = DIRECTION('',(0.,0.,-1.)); +#128347 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#128348 = ORIENTED_EDGE('',*,*,#128349,.T.); +#128349 = EDGE_CURVE('',#128341,#128350,#128352,.T.); +#128350 = VERTEX_POINT('',#128351); +#128351 = CARTESIAN_POINT('',(125.983334,-136.103933,1.585)); +#128352 = LINE('',#128353,#128354); +#128353 = CARTESIAN_POINT('',(125.863825,-136.105854,1.585)); +#128354 = VECTOR('',#128355,1.); +#128355 = DIRECTION('',(0.999870836632,1.607202702016E-02,0.)); +#128356 = ORIENTED_EDGE('',*,*,#128357,.T.); +#128357 = EDGE_CURVE('',#128350,#128358,#128360,.T.); +#128358 = VERTEX_POINT('',#128359); +#128359 = CARTESIAN_POINT('',(125.985255,-135.717757,1.585)); +#128360 = LINE('',#128361,#128362); +#128361 = CARTESIAN_POINT('',(125.983334,-136.103933,1.585)); +#128362 = VECTOR('',#128363,1.); +#128363 = DIRECTION('',(4.974354266045E-03,0.999987627823,0.)); +#128364 = ORIENTED_EDGE('',*,*,#128365,.T.); +#128365 = EDGE_CURVE('',#128358,#128366,#128368,.T.); +#128366 = VERTEX_POINT('',#128367); +#128367 = CARTESIAN_POINT('',(126.000187,-135.681709,1.585)); +#128368 = LINE('',#128369,#128370); +#128369 = CARTESIAN_POINT('',(125.985255,-135.717757,1.585)); +#128370 = VECTOR('',#128371,1.); +#128371 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#128372 = ORIENTED_EDGE('',*,*,#128373,.T.); +#128373 = EDGE_CURVE('',#128366,#128192,#128374,.T.); +#128374 = LINE('',#128375,#128376); +#128375 = CARTESIAN_POINT('',(126.000187,-135.681709,1.585)); +#128376 = VECTOR('',#128377,1.); +#128377 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128378 = PLANE('',#128379); +#128379 = AXIS2_PLACEMENT_3D('',#128380,#128381,#128382); +#128380 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128381 = DIRECTION('',(0.,0.,1.)); +#128382 = DIRECTION('',(1.,0.,-0.)); +#128383 = SHELL_BASED_SURFACE_MODEL('',(#128384)); +#128384 = OPEN_SHELL('',(#128385)); +#128385 = ADVANCED_FACE('',(#128386),#128552,.T.); +#128386 = FACE_BOUND('',#128387,.F.); +#128387 = EDGE_LOOP('',(#128388,#128399,#128407,#128416,#128424,#128432, + #128440,#128448,#128456,#128465,#128473,#128481,#128489,#128497, + #128505,#128513,#128521,#128530,#128538,#128546)); +#128388 = ORIENTED_EDGE('',*,*,#128389,.T.); +#128389 = EDGE_CURVE('',#128390,#128392,#128394,.T.); +#128390 = VERTEX_POINT('',#128391); +#128391 = CARTESIAN_POINT('',(129.227777,-135.654119,1.585)); +#128392 = VERTEX_POINT('',#128393); +#128393 = CARTESIAN_POINT('',(129.381413,-135.717757,1.585)); +#128394 = CIRCLE('',#128395,0.100000590676); +#128395 = AXIS2_PLACEMENT_3D('',#128396,#128397,#128398); +#128396 = CARTESIAN_POINT('',(129.283334,-135.7372666872,1.585)); +#128397 = DIRECTION('',(0.,0.,-1.)); +#128398 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#128399 = ORIENTED_EDGE('',*,*,#128400,.T.); +#128400 = EDGE_CURVE('',#128392,#128401,#128403,.T.); +#128401 = VERTEX_POINT('',#128402); +#128402 = CARTESIAN_POINT('',(129.383334,-136.142129,1.585)); +#128403 = LINE('',#128404,#128405); +#128404 = CARTESIAN_POINT('',(129.381413,-135.717757,1.585)); +#128405 = VECTOR('',#128406,1.); +#128406 = DIRECTION('',(4.526642471141E-03,-0.999989754701,0.)); +#128407 = ORIENTED_EDGE('',*,*,#128408,.T.); +#128408 = EDGE_CURVE('',#128401,#128409,#128411,.T.); +#128409 = VERTEX_POINT('',#128410); +#128410 = CARTESIAN_POINT('',(129.728056,-136.11449,1.585)); +#128411 = CIRCLE('',#128412,0.392597731157); +#128412 = AXIS2_PLACEMENT_3D('',#128413,#128414,#128415); +#128413 = CARTESIAN_POINT('',(129.58386465681,-136.4796500129,1.585)); +#128414 = DIRECTION('',(0.,0.,-1.)); +#128415 = DIRECTION('',(-0.510778949809,0.859712082288,0.)); +#128416 = ORIENTED_EDGE('',*,*,#128417,.T.); +#128417 = EDGE_CURVE('',#128409,#128418,#128420,.T.); +#128418 = VERTEX_POINT('',#128419); +#128419 = CARTESIAN_POINT('',(129.877979,-136.1916,1.585)); +#128420 = LINE('',#128421,#128422); +#128421 = CARTESIAN_POINT('',(129.728056,-136.11449,1.585)); +#128422 = VECTOR('',#128423,1.); +#128423 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#128424 = ORIENTED_EDGE('',*,*,#128425,.T.); +#128425 = EDGE_CURVE('',#128418,#128426,#128428,.T.); +#128426 = VERTEX_POINT('',#128427); +#128427 = CARTESIAN_POINT('',(129.90611,-136.225878,1.585)); +#128428 = LINE('',#128429,#128430); +#128429 = CARTESIAN_POINT('',(129.877979,-136.1916,1.585)); +#128430 = VECTOR('',#128431,1.); +#128431 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#128432 = ORIENTED_EDGE('',*,*,#128433,.T.); +#128433 = EDGE_CURVE('',#128426,#128434,#128436,.T.); +#128434 = VERTEX_POINT('',#128435); +#128435 = CARTESIAN_POINT('',(129.980037,-136.381103,1.585)); +#128436 = LINE('',#128437,#128438); +#128437 = CARTESIAN_POINT('',(129.90611,-136.225878,1.585)); +#128438 = VECTOR('',#128439,1.); +#128439 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#128440 = ORIENTED_EDGE('',*,*,#128441,.T.); +#128441 = EDGE_CURVE('',#128434,#128442,#128444,.T.); +#128442 = VERTEX_POINT('',#128443); +#128443 = CARTESIAN_POINT('',(129.983334,-136.403933,1.585)); +#128444 = LINE('',#128445,#128446); +#128445 = CARTESIAN_POINT('',(129.980037,-136.381103,1.585)); +#128446 = VECTOR('',#128447,1.); +#128447 = DIRECTION('',(0.142932451763,-0.989732445782,0.)); +#128448 = ORIENTED_EDGE('',*,*,#128449,.T.); +#128449 = EDGE_CURVE('',#128442,#128450,#128452,.T.); +#128450 = VERTEX_POINT('',#128451); +#128451 = CARTESIAN_POINT('',(129.981413,-137.156775,1.585)); +#128452 = LINE('',#128453,#128454); +#128453 = CARTESIAN_POINT('',(129.983334,-136.403933,1.585)); +#128454 = VECTOR('',#128455,1.); +#128455 = DIRECTION('',(-2.551655920146E-03,-0.999996744521,0.)); +#128456 = ORIENTED_EDGE('',*,*,#128457,.T.); +#128457 = EDGE_CURVE('',#128450,#128458,#128460,.T.); +#128458 = VERTEX_POINT('',#128459); +#128459 = CARTESIAN_POINT('',(129.785255,-137.156775,1.585)); +#128460 = CIRCLE('',#128461,0.100000456609); +#128461 = AXIS2_PLACEMENT_3D('',#128462,#128463,#128464); +#128462 = CARTESIAN_POINT('',(129.883334,-137.137266,1.585)); +#128463 = DIRECTION('',(-0.,0.,-1.)); +#128464 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128465 = ORIENTED_EDGE('',*,*,#128466,.T.); +#128466 = EDGE_CURVE('',#128458,#128467,#128469,.T.); +#128467 = VERTEX_POINT('',#128468); +#128468 = CARTESIAN_POINT('',(129.783334,-136.427541,1.585)); +#128469 = LINE('',#128470,#128471); +#128470 = CARTESIAN_POINT('',(129.785255,-137.156775,1.585)); +#128471 = VECTOR('',#128472,1.); +#128472 = DIRECTION('',(-2.634261889553E-03,0.999996530326,0.)); +#128473 = ORIENTED_EDGE('',*,*,#128474,.T.); +#128474 = EDGE_CURVE('',#128467,#128475,#128477,.T.); +#128475 = VERTEX_POINT('',#128476); +#128476 = CARTESIAN_POINT('',(129.742131,-136.345135,1.585)); +#128477 = LINE('',#128478,#128479); +#128478 = CARTESIAN_POINT('',(129.783334,-136.427541,1.585)); +#128479 = VECTOR('',#128480,1.); +#128480 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#128481 = ORIENTED_EDGE('',*,*,#128482,.T.); +#128482 = EDGE_CURVE('',#128475,#128483,#128485,.T.); +#128483 = VERTEX_POINT('',#128484); +#128484 = CARTESIAN_POINT('',(129.659726,-136.303933,1.585)); +#128485 = LINE('',#128486,#128487); +#128486 = CARTESIAN_POINT('',(129.742131,-136.345135,1.585)); +#128487 = VECTOR('',#128488,1.); +#128488 = DIRECTION('',(-0.894429361803,0.447209253868,0.)); +#128489 = ORIENTED_EDGE('',*,*,#128490,.T.); +#128490 = EDGE_CURVE('',#128483,#128491,#128493,.T.); +#128491 = VERTEX_POINT('',#128492); +#128492 = CARTESIAN_POINT('',(129.506942,-136.303933,1.585)); +#128493 = LINE('',#128494,#128495); +#128494 = CARTESIAN_POINT('',(129.659726,-136.303933,1.585)); +#128495 = VECTOR('',#128496,1.); +#128496 = DIRECTION('',(-1.,0.,0.)); +#128497 = ORIENTED_EDGE('',*,*,#128498,.T.); +#128498 = EDGE_CURVE('',#128491,#128499,#128501,.T.); +#128499 = VERTEX_POINT('',#128500); +#128500 = CARTESIAN_POINT('',(129.409234,-136.352787,1.585)); +#128501 = LINE('',#128502,#128503); +#128502 = CARTESIAN_POINT('',(129.506942,-136.303933,1.585)); +#128503 = VECTOR('',#128504,1.); +#128504 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#128505 = ORIENTED_EDGE('',*,*,#128506,.T.); +#128506 = EDGE_CURVE('',#128499,#128507,#128509,.T.); +#128507 = VERTEX_POINT('',#128508); +#128508 = CARTESIAN_POINT('',(129.383334,-136.378687,1.585)); +#128509 = LINE('',#128510,#128511); +#128510 = CARTESIAN_POINT('',(129.409234,-136.352787,1.585)); +#128511 = VECTOR('',#128512,1.); +#128512 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#128513 = ORIENTED_EDGE('',*,*,#128514,.T.); +#128514 = EDGE_CURVE('',#128507,#128515,#128517,.T.); +#128515 = VERTEX_POINT('',#128516); +#128516 = CARTESIAN_POINT('',(129.381413,-137.156775,1.585)); +#128517 = LINE('',#128518,#128519); +#128518 = CARTESIAN_POINT('',(129.383334,-136.378687,1.585)); +#128519 = VECTOR('',#128520,1.); +#128520 = DIRECTION('',(-2.468864891173E-03,-0.999996952348,0.)); +#128521 = ORIENTED_EDGE('',*,*,#128522,.T.); +#128522 = EDGE_CURVE('',#128515,#128523,#128525,.T.); +#128523 = VERTEX_POINT('',#128524); +#128524 = CARTESIAN_POINT('',(129.185255,-137.156775,1.585)); +#128525 = CIRCLE('',#128526,0.100000456609); +#128526 = AXIS2_PLACEMENT_3D('',#128527,#128528,#128529); +#128527 = CARTESIAN_POINT('',(129.283334,-137.137266,1.585)); +#128528 = DIRECTION('',(-0.,0.,-1.)); +#128529 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128530 = ORIENTED_EDGE('',*,*,#128531,.T.); +#128531 = EDGE_CURVE('',#128523,#128532,#128534,.T.); +#128532 = VERTEX_POINT('',#128533); +#128533 = CARTESIAN_POINT('',(129.185255,-135.717757,1.585)); +#128534 = LINE('',#128535,#128536); +#128535 = CARTESIAN_POINT('',(129.185255,-137.156775,1.585)); +#128536 = VECTOR('',#128537,1.); +#128537 = DIRECTION('',(0.,1.,0.)); +#128538 = ORIENTED_EDGE('',*,*,#128539,.T.); +#128539 = EDGE_CURVE('',#128532,#128540,#128542,.T.); +#128540 = VERTEX_POINT('',#128541); +#128541 = CARTESIAN_POINT('',(129.200187,-135.681709,1.585)); +#128542 = LINE('',#128543,#128544); +#128543 = CARTESIAN_POINT('',(129.185255,-135.717757,1.585)); +#128544 = VECTOR('',#128545,1.); +#128545 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#128546 = ORIENTED_EDGE('',*,*,#128547,.T.); +#128547 = EDGE_CURVE('',#128540,#128390,#128548,.T.); +#128548 = LINE('',#128549,#128550); +#128549 = CARTESIAN_POINT('',(129.200187,-135.681709,1.585)); +#128550 = VECTOR('',#128551,1.); +#128551 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128552 = PLANE('',#128553); +#128553 = AXIS2_PLACEMENT_3D('',#128554,#128555,#128556); +#128554 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128555 = DIRECTION('',(0.,0.,1.)); +#128556 = DIRECTION('',(1.,0.,-0.)); +#128557 = SHELL_BASED_SURFACE_MODEL('',(#128558)); +#128558 = OPEN_SHELL('',(#128559)); +#128559 = ADVANCED_FACE('',(#128560,#128963),#129038,.T.); +#128560 = FACE_BOUND('',#128561,.F.); +#128561 = EDGE_LOOP('',(#128562,#128572,#128580,#128588,#128596,#128604, + #128613,#128621,#128629,#128637,#128645,#128653,#128661,#128669, + #128677,#128685,#128693,#128701,#128709,#128717,#128725,#128733, + #128741,#128749,#128757,#128765,#128773,#128781,#128789,#128797, + #128805,#128813,#128821,#128829,#128837,#128845,#128853,#128861, + #128869,#128877,#128885,#128893,#128901,#128909,#128917,#128925, + #128933,#128941,#128949,#128957)); +#128562 = ORIENTED_EDGE('',*,*,#128563,.T.); +#128563 = EDGE_CURVE('',#128564,#128566,#128568,.T.); +#128564 = VERTEX_POINT('',#128565); +#128565 = CARTESIAN_POINT('',(100.718274,-134.623926,1.585)); +#128566 = VERTEX_POINT('',#128567); +#128567 = CARTESIAN_POINT('',(100.905046,-134.58657,1.585)); +#128568 = LINE('',#128569,#128570); +#128569 = CARTESIAN_POINT('',(100.718274,-134.623926,1.585)); +#128570 = VECTOR('',#128571,1.); +#128571 = DIRECTION('',(0.98057906023,0.196124212269,0.)); +#128572 = ORIENTED_EDGE('',*,*,#128573,.T.); +#128573 = EDGE_CURVE('',#128566,#128574,#128576,.T.); +#128574 = VERTEX_POINT('',#128575); +#128575 = CARTESIAN_POINT('',(101.278589,-134.58657,1.585)); +#128576 = LINE('',#128577,#128578); +#128577 = CARTESIAN_POINT('',(100.905046,-134.58657,1.585)); +#128578 = VECTOR('',#128579,1.); +#128579 = DIRECTION('',(1.,0.,0.)); +#128580 = ORIENTED_EDGE('',*,*,#128581,.T.); +#128581 = EDGE_CURVE('',#128574,#128582,#128584,.T.); +#128582 = VERTEX_POINT('',#128583); +#128583 = CARTESIAN_POINT('',(101.540064,-134.642604,1.585)); +#128584 = LINE('',#128585,#128586); +#128585 = CARTESIAN_POINT('',(101.278589,-134.58657,1.585)); +#128586 = VECTOR('',#128587,1.); +#128587 = DIRECTION('',(0.977799623007,-0.209542113302,0.)); +#128588 = ORIENTED_EDGE('',*,*,#128589,.T.); +#128589 = EDGE_CURVE('',#128582,#128590,#128592,.T.); +#128590 = VERTEX_POINT('',#128591); +#128591 = CARTESIAN_POINT('',(101.782871,-134.754664,1.585)); +#128592 = LINE('',#128593,#128594); +#128593 = CARTESIAN_POINT('',(101.540064,-134.642604,1.585)); +#128594 = VECTOR('',#128595,1.); +#128595 = DIRECTION('',(0.907966170127,-0.419043474959,0.)); +#128596 = ORIENTED_EDGE('',*,*,#128597,.T.); +#128597 = EDGE_CURVE('',#128590,#128598,#128600,.T.); +#128598 = VERTEX_POINT('',#128599); +#128599 = CARTESIAN_POINT('',(101.91361,-134.848052,1.585)); +#128600 = LINE('',#128601,#128602); +#128601 = CARTESIAN_POINT('',(101.782871,-134.754664,1.585)); +#128602 = VECTOR('',#128603,1.); +#128603 = DIRECTION('',(0.813724639706,-0.581250557621,0.)); +#128604 = ORIENTED_EDGE('',*,*,#128605,.T.); +#128605 = EDGE_CURVE('',#128598,#128606,#128608,.T.); +#128606 = VERTEX_POINT('',#128607); +#128607 = CARTESIAN_POINT('',(102.287149,-135.483078,1.585)); +#128608 = CIRCLE('',#128609,1.016333136587); +#128609 = AXIS2_PLACEMENT_3D('',#128610,#128611,#128612); +#128610 = CARTESIAN_POINT('',(101.28393043297,-135.645821821,1.585)); +#128611 = DIRECTION('',(0.,0.,-1.)); +#128612 = DIRECTION('',(0.619560205568,0.784949139548,0.)); +#128613 = ORIENTED_EDGE('',*,*,#128614,.T.); +#128614 = EDGE_CURVE('',#128606,#128615,#128617,.T.); +#128615 = VERTEX_POINT('',#128616); +#128616 = CARTESIAN_POINT('',(102.305834,-135.912655,1.585)); +#128617 = LINE('',#128618,#128619); +#128618 = CARTESIAN_POINT('',(102.287149,-135.483078,1.585)); +#128619 = VECTOR('',#128620,1.); +#128620 = DIRECTION('',(4.345518899165E-02,-0.999055377119,0.)); +#128621 = ORIENTED_EDGE('',*,*,#128622,.T.); +#128622 = EDGE_CURVE('',#128615,#128623,#128625,.T.); +#128623 = VERTEX_POINT('',#128624); +#128624 = CARTESIAN_POINT('',(100.643568,-135.912655,1.585)); +#128625 = LINE('',#128626,#128627); +#128626 = CARTESIAN_POINT('',(102.305834,-135.912655,1.585)); +#128627 = VECTOR('',#128628,1.); +#128628 = DIRECTION('',(-1.,0.,0.)); +#128629 = ORIENTED_EDGE('',*,*,#128630,.T.); +#128630 = EDGE_CURVE('',#128623,#128631,#128633,.T.); +#128631 = VERTEX_POINT('',#128632); +#128632 = CARTESIAN_POINT('',(100.624889,-135.931327,1.585)); +#128633 = LINE('',#128634,#128635); +#128634 = CARTESIAN_POINT('',(100.643568,-135.912655,1.585)); +#128635 = VECTOR('',#128636,1.); +#128636 = DIRECTION('',(-0.707239288578,-0.70697424896,0.)); +#128637 = ORIENTED_EDGE('',*,*,#128638,.T.); +#128638 = EDGE_CURVE('',#128631,#128639,#128641,.T.); +#128639 = VERTEX_POINT('',#128640); +#128640 = CARTESIAN_POINT('',(100.624889,-136.043388,1.585)); +#128641 = LINE('',#128642,#128643); +#128642 = CARTESIAN_POINT('',(100.624889,-135.931327,1.585)); +#128643 = VECTOR('',#128644,1.); +#128644 = DIRECTION('',(0.,-1.,0.)); +#128645 = ORIENTED_EDGE('',*,*,#128646,.T.); +#128646 = EDGE_CURVE('',#128639,#128647,#128649,.T.); +#128647 = VERTEX_POINT('',#128648); +#128648 = CARTESIAN_POINT('',(100.699598,-136.211487,1.585)); +#128649 = LINE('',#128650,#128651); +#128650 = CARTESIAN_POINT('',(100.624889,-136.043388,1.585)); +#128651 = VECTOR('',#128652,1.); +#128652 = DIRECTION('',(0.406130900234,-0.913814911169,0.)); +#128653 = ORIENTED_EDGE('',*,*,#128654,.T.); +#128654 = EDGE_CURVE('',#128647,#128655,#128657,.T.); +#128655 = VERTEX_POINT('',#128656); +#128656 = CARTESIAN_POINT('',(100.830337,-136.323541,1.585)); +#128657 = LINE('',#128658,#128659); +#128658 = CARTESIAN_POINT('',(100.699598,-136.211487,1.585)); +#128659 = VECTOR('',#128660,1.); +#128660 = DIRECTION('',(0.759279558986,-0.650764589775,0.)); +#128661 = ORIENTED_EDGE('',*,*,#128662,.T.); +#128662 = EDGE_CURVE('',#128655,#128663,#128665,.T.); +#128663 = VERTEX_POINT('',#128664); +#128664 = CARTESIAN_POINT('',(100.942401,-136.379579,1.585)); +#128665 = LINE('',#128666,#128667); +#128666 = CARTESIAN_POINT('',(100.830337,-136.323541,1.585)); +#128667 = VECTOR('',#128668,1.); +#128668 = DIRECTION('',(0.894408035239,-0.447251904971,0.)); +#128669 = ORIENTED_EDGE('',*,*,#128670,.T.); +#128670 = EDGE_CURVE('',#128663,#128671,#128673,.T.); +#128671 = VERTEX_POINT('',#128672); +#128672 = CARTESIAN_POINT('',(100.998435,-136.379579,1.585)); +#128673 = LINE('',#128674,#128675); +#128674 = CARTESIAN_POINT('',(100.942401,-136.379579,1.585)); +#128675 = VECTOR('',#128676,1.); +#128676 = DIRECTION('',(1.,0.,0.)); +#128677 = ORIENTED_EDGE('',*,*,#128678,.T.); +#128678 = EDGE_CURVE('',#128671,#128679,#128681,.T.); +#128679 = VERTEX_POINT('',#128680); +#128680 = CARTESIAN_POINT('',(101.035792,-136.416931,1.585)); +#128681 = LINE('',#128682,#128683); +#128682 = CARTESIAN_POINT('',(100.998435,-136.379579,1.585)); +#128683 = VECTOR('',#128684,1.); +#128684 = DIRECTION('',(0.707154103672,-0.707059455534,0.)); +#128685 = ORIENTED_EDGE('',*,*,#128686,.T.); +#128686 = EDGE_CURVE('',#128679,#128687,#128689,.T.); +#128687 = VERTEX_POINT('',#128688); +#128688 = CARTESIAN_POINT('',(101.297265,-136.416931,1.585)); +#128689 = LINE('',#128690,#128691); +#128690 = CARTESIAN_POINT('',(101.035792,-136.416931,1.585)); +#128691 = VECTOR('',#128692,1.); +#128692 = DIRECTION('',(1.,0.,0.)); +#128693 = ORIENTED_EDGE('',*,*,#128694,.T.); +#128694 = EDGE_CURVE('',#128687,#128695,#128697,.T.); +#128695 = VERTEX_POINT('',#128696); +#128696 = CARTESIAN_POINT('',(101.334616,-136.379579,1.585)); +#128697 = LINE('',#128698,#128699); +#128698 = CARTESIAN_POINT('',(101.297265,-136.416931,1.585)); +#128699 = VECTOR('',#128700,1.); +#128700 = DIRECTION('',(0.707097315549,0.707116246697,0.)); +#128701 = ORIENTED_EDGE('',*,*,#128702,.T.); +#128702 = EDGE_CURVE('',#128695,#128703,#128705,.T.); +#128703 = VERTEX_POINT('',#128704); +#128704 = CARTESIAN_POINT('',(101.39065,-136.379579,1.585)); +#128705 = LINE('',#128706,#128707); +#128706 = CARTESIAN_POINT('',(101.334616,-136.379579,1.585)); +#128707 = VECTOR('',#128708,1.); +#128708 = DIRECTION('',(1.,0.,0.)); +#128709 = ORIENTED_EDGE('',*,*,#128710,.T.); +#128710 = EDGE_CURVE('',#128703,#128711,#128713,.T.); +#128711 = VERTEX_POINT('',#128712); +#128712 = CARTESIAN_POINT('',(101.540064,-136.286189,1.585)); +#128713 = LINE('',#128714,#128715); +#128714 = CARTESIAN_POINT('',(101.39065,-136.379579,1.585)); +#128715 = VECTOR('',#128716,1.); +#128716 = DIRECTION('',(0.847982361522,0.530024447123,0.)); +#128717 = ORIENTED_EDGE('',*,*,#128718,.T.); +#128718 = EDGE_CURVE('',#128711,#128719,#128721,.T.); +#128719 = VERTEX_POINT('',#128720); +#128720 = CARTESIAN_POINT('',(101.577426,-136.286189,1.585)); +#128721 = LINE('',#128722,#128723); +#128722 = CARTESIAN_POINT('',(101.540064,-136.286189,1.585)); +#128723 = VECTOR('',#128724,1.); +#128724 = DIRECTION('',(1.,0.,0.)); +#128725 = ORIENTED_EDGE('',*,*,#128726,.T.); +#128726 = EDGE_CURVE('',#128719,#128727,#128729,.T.); +#128727 = VERTEX_POINT('',#128728); +#128728 = CARTESIAN_POINT('',(101.708163,-136.155451,1.585)); +#128729 = LINE('',#128730,#128731); +#128730 = CARTESIAN_POINT('',(101.577426,-136.286189,1.585)); +#128731 = VECTOR('',#128732,1.); +#128732 = DIRECTION('',(0.707104076882,0.707109485481,0.)); +#128733 = ORIENTED_EDGE('',*,*,#128734,.T.); +#128734 = EDGE_CURVE('',#128727,#128735,#128737,.T.); +#128735 = VERTEX_POINT('',#128736); +#128736 = CARTESIAN_POINT('',(101.764195,-136.192802,1.585)); +#128737 = LINE('',#128738,#128739); +#128738 = CARTESIAN_POINT('',(101.708163,-136.155451,1.585)); +#128739 = VECTOR('',#128740,1.); +#128740 = DIRECTION('',(0.83207542426,-0.554662499492,0.)); +#128741 = ORIENTED_EDGE('',*,*,#128742,.T.); +#128742 = EDGE_CURVE('',#128735,#128743,#128745,.T.); +#128743 = VERTEX_POINT('',#128744); +#128744 = CARTESIAN_POINT('',(101.820222,-136.192802,1.585)); +#128745 = LINE('',#128746,#128747); +#128746 = CARTESIAN_POINT('',(101.764195,-136.192802,1.585)); +#128747 = VECTOR('',#128748,1.); +#128748 = DIRECTION('',(1.,0.,0.)); +#128749 = ORIENTED_EDGE('',*,*,#128750,.T.); +#128750 = EDGE_CURVE('',#128743,#128751,#128753,.T.); +#128751 = VERTEX_POINT('',#128752); +#128752 = CARTESIAN_POINT('',(102.044349,-136.323541,1.585)); +#128753 = LINE('',#128754,#128755); +#128754 = CARTESIAN_POINT('',(101.820222,-136.192802,1.585)); +#128755 = VECTOR('',#128756,1.); +#128756 = DIRECTION('',(0.863781836302,-0.503865993371,0.)); +#128757 = ORIENTED_EDGE('',*,*,#128758,.T.); +#128758 = EDGE_CURVE('',#128751,#128759,#128761,.T.); +#128759 = VERTEX_POINT('',#128760); +#128760 = CARTESIAN_POINT('',(102.081704,-136.323541,1.585)); +#128761 = LINE('',#128762,#128763); +#128762 = CARTESIAN_POINT('',(102.044349,-136.323541,1.585)); +#128763 = VECTOR('',#128764,1.); +#128764 = DIRECTION('',(1.,0.,0.)); +#128765 = ORIENTED_EDGE('',*,*,#128766,.T.); +#128766 = EDGE_CURVE('',#128759,#128767,#128769,.T.); +#128767 = VERTEX_POINT('',#128768); +#128768 = CARTESIAN_POINT('',(102.231119,-136.416931,1.585)); +#128769 = LINE('',#128770,#128771); +#128770 = CARTESIAN_POINT('',(102.081704,-136.323541,1.585)); +#128771 = VECTOR('',#128772,1.); +#128772 = DIRECTION('',(0.847983955873,-0.530021896322,0.)); +#128773 = ORIENTED_EDGE('',*,*,#128774,.T.); +#128774 = EDGE_CURVE('',#128767,#128775,#128777,.T.); +#128775 = VERTEX_POINT('',#128776); +#128776 = CARTESIAN_POINT('',(102.249799,-136.472964,1.585)); +#128777 = LINE('',#128778,#128779); +#128778 = CARTESIAN_POINT('',(102.231119,-136.416931,1.585)); +#128779 = VECTOR('',#128780,1.); +#128780 = DIRECTION('',(0.316263320022,-0.948671445975,0.)); +#128781 = ORIENTED_EDGE('',*,*,#128782,.T.); +#128782 = EDGE_CURVE('',#128775,#128783,#128785,.T.); +#128783 = VERTEX_POINT('',#128784); +#128784 = CARTESIAN_POINT('',(102.175095,-136.585022,1.585)); +#128785 = LINE('',#128786,#128787); +#128786 = CARTESIAN_POINT('',(102.249799,-136.472964,1.585)); +#128787 = VECTOR('',#128788,1.); +#128788 = DIRECTION('',(-0.554693342161,-0.832054863673,0.)); +#128789 = ORIENTED_EDGE('',*,*,#128790,.T.); +#128790 = EDGE_CURVE('',#128783,#128791,#128793,.T.); +#128791 = VERTEX_POINT('',#128792); +#128792 = CARTESIAN_POINT('',(102.006996,-136.753118,1.585)); +#128793 = LINE('',#128794,#128795); +#128794 = CARTESIAN_POINT('',(102.175095,-136.585022,1.585)); +#128795 = VECTOR('',#128796,1.); +#128796 = DIRECTION('',(-0.70711309095,-0.707100471367,0.)); +#128797 = ORIENTED_EDGE('',*,*,#128798,.T.); +#128798 = EDGE_CURVE('',#128791,#128799,#128801,.T.); +#128799 = VERTEX_POINT('',#128800); +#128800 = CARTESIAN_POINT('',(101.876257,-136.846511,1.585)); +#128801 = LINE('',#128802,#128803); +#128802 = CARTESIAN_POINT('',(102.006996,-136.753118,1.585)); +#128803 = VECTOR('',#128804,1.); +#128804 = DIRECTION('',(-0.813709920547,-0.581271163231,0.)); +#128805 = ORIENTED_EDGE('',*,*,#128806,.T.); +#128806 = EDGE_CURVE('',#128799,#128807,#128809,.T.); +#128807 = VERTEX_POINT('',#128808); +#128808 = CARTESIAN_POINT('',(101.558745,-136.97725,1.585)); +#128809 = LINE('',#128810,#128811); +#128810 = CARTESIAN_POINT('',(101.876257,-136.846511,1.585)); +#128811 = VECTOR('',#128812,1.); +#128812 = DIRECTION('',(-0.924679365047,-0.380746729279,0.)); +#128813 = ORIENTED_EDGE('',*,*,#128814,.T.); +#128814 = EDGE_CURVE('',#128807,#128815,#128817,.T.); +#128815 = VERTEX_POINT('',#128816); +#128816 = CARTESIAN_POINT('',(101.353294,-136.995925,1.585)); +#128817 = LINE('',#128818,#128819); +#128818 = CARTESIAN_POINT('',(101.558745,-136.97725,1.585)); +#128819 = VECTOR('',#128820,1.); +#128820 = DIRECTION('',(-0.995894239446,-9.052438256157E-02,0.)); +#128821 = ORIENTED_EDGE('',*,*,#128822,.T.); +#128822 = EDGE_CURVE('',#128815,#128823,#128825,.T.); +#128823 = VERTEX_POINT('',#128824); +#128824 = CARTESIAN_POINT('',(101.334616,-137.014602,1.585)); +#128825 = LINE('',#128826,#128827); +#128826 = CARTESIAN_POINT('',(101.353294,-136.995925,1.585)); +#128827 = VECTOR('',#128828,1.); +#128828 = DIRECTION('',(-0.707125710308,-0.707087851559,0.)); +#128829 = ORIENTED_EDGE('',*,*,#128830,.T.); +#128830 = EDGE_CURVE('',#128823,#128831,#128833,.T.); +#128831 = VERTEX_POINT('',#128832); +#128832 = CARTESIAN_POINT('',(100.867685,-137.014602,1.585)); +#128833 = LINE('',#128834,#128835); +#128834 = CARTESIAN_POINT('',(101.334616,-137.014602,1.585)); +#128835 = VECTOR('',#128836,1.); +#128836 = DIRECTION('',(-1.,0.,0.)); +#128837 = ORIENTED_EDGE('',*,*,#128838,.T.); +#128838 = EDGE_CURVE('',#128831,#128839,#128841,.T.); +#128839 = VERTEX_POINT('',#128840); +#128840 = CARTESIAN_POINT('',(100.849015,-136.995925,1.585)); +#128841 = LINE('',#128842,#128843); +#128842 = CARTESIAN_POINT('',(100.867685,-137.014602,1.585)); +#128843 = VECTOR('',#128844,1.); +#128844 = DIRECTION('',(-0.706974234764,0.707239302768,0.)); +#128845 = ORIENTED_EDGE('',*,*,#128846,.T.); +#128846 = EDGE_CURVE('',#128839,#128847,#128849,.T.); +#128847 = VERTEX_POINT('',#128848); +#128848 = CARTESIAN_POINT('',(100.755632,-136.995925,1.585)); +#128849 = LINE('',#128850,#128851); +#128850 = CARTESIAN_POINT('',(100.849015,-136.995925,1.585)); +#128851 = VECTOR('',#128852,1.); +#128852 = DIRECTION('',(-1.,0.,0.)); +#128853 = ORIENTED_EDGE('',*,*,#128854,.T.); +#128854 = EDGE_CURVE('',#128847,#128855,#128857,.T.); +#128855 = VERTEX_POINT('',#128856); +#128856 = CARTESIAN_POINT('',(100.624889,-136.939891,1.585)); +#128857 = LINE('',#128858,#128859); +#128858 = CARTESIAN_POINT('',(100.755632,-136.995925,1.585)); +#128859 = VECTOR('',#128860,1.); +#128860 = DIRECTION('',(-0.919141757334,0.393926934754,0.)); +#128861 = ORIENTED_EDGE('',*,*,#128862,.T.); +#128862 = EDGE_CURVE('',#128855,#128863,#128865,.T.); +#128863 = VERTEX_POINT('',#128864); +#128864 = CARTESIAN_POINT('',(100.568858,-136.939891,1.585)); +#128865 = LINE('',#128866,#128867); +#128866 = CARTESIAN_POINT('',(100.624889,-136.939891,1.585)); +#128867 = VECTOR('',#128868,1.); +#128868 = DIRECTION('',(-1.,0.,0.)); +#128869 = ORIENTED_EDGE('',*,*,#128870,.T.); +#128870 = EDGE_CURVE('',#128863,#128871,#128873,.T.); +#128871 = VERTEX_POINT('',#128872); +#128872 = CARTESIAN_POINT('',(100.326051,-136.809154,1.585)); +#128873 = LINE('',#128874,#128875); +#128874 = CARTESIAN_POINT('',(100.568858,-136.939891,1.585)); +#128875 = VECTOR('',#128876,1.); +#128876 = DIRECTION('',(-0.880479017668,0.474085118357,0.)); +#128877 = ORIENTED_EDGE('',*,*,#128878,.T.); +#128878 = EDGE_CURVE('',#128871,#128879,#128881,.T.); +#128879 = VERTEX_POINT('',#128880); +#128880 = CARTESIAN_POINT('',(100.045899,-136.547676,1.585)); +#128881 = LINE('',#128882,#128883); +#128882 = CARTESIAN_POINT('',(100.326051,-136.809154,1.585)); +#128883 = VECTOR('',#128884,1.); +#128884 = DIRECTION('',(-0.731051623635,0.682322155276,0.)); +#128885 = ORIENTED_EDGE('',*,*,#128886,.T.); +#128886 = EDGE_CURVE('',#128879,#128887,#128889,.T.); +#128887 = VERTEX_POINT('',#128888); +#128888 = CARTESIAN_POINT('',(99.877799,-136.248834,1.585)); +#128889 = LINE('',#128890,#128891); +#128890 = CARTESIAN_POINT('',(100.045899,-136.547676,1.585)); +#128891 = VECTOR('',#128892,1.); +#128892 = DIRECTION('',(-0.490264285948,0.871573823565,0.)); +#128893 = ORIENTED_EDGE('',*,*,#128894,.T.); +#128894 = EDGE_CURVE('',#128887,#128895,#128897,.T.); +#128895 = VERTEX_POINT('',#128896); +#128896 = CARTESIAN_POINT('',(99.821775,-136.024711,1.585)); +#128897 = LINE('',#128898,#128899); +#128898 = CARTESIAN_POINT('',(99.877799,-136.248834,1.585)); +#128899 = VECTOR('',#128900,1.); +#128900 = DIRECTION('',(-0.242508125298,0.970149374666,0.)); +#128901 = ORIENTED_EDGE('',*,*,#128902,.T.); +#128902 = EDGE_CURVE('',#128895,#128903,#128905,.T.); +#128903 = VERTEX_POINT('',#128904); +#128904 = CARTESIAN_POINT('',(99.803099,-135.78191,1.585)); +#128905 = LINE('',#128906,#128907); +#128906 = CARTESIAN_POINT('',(99.821775,-136.024711,1.585)); +#128907 = VECTOR('',#128908,1.); +#128908 = DIRECTION('',(-7.669241657071E-02,0.997054799517,0.)); +#128909 = ORIENTED_EDGE('',*,*,#128910,.T.); +#128910 = EDGE_CURVE('',#128903,#128911,#128913,.T.); +#128911 = VERTEX_POINT('',#128912); +#128912 = CARTESIAN_POINT('',(99.821775,-135.763233,1.585)); +#128913 = LINE('',#128914,#128915); +#128914 = CARTESIAN_POINT('',(99.803099,-135.78191,1.585)); +#128915 = VECTOR('',#128916,1.); +#128916 = DIRECTION('',(0.707087850545,0.707125711321,0.)); +#128917 = ORIENTED_EDGE('',*,*,#128918,.T.); +#128918 = EDGE_CURVE('',#128911,#128919,#128921,.T.); +#128919 = VERTEX_POINT('',#128920); +#128920 = CARTESIAN_POINT('',(99.840449,-135.501753,1.585)); +#128921 = LINE('',#128922,#128923); +#128922 = CARTESIAN_POINT('',(99.821775,-135.763233,1.585)); +#128923 = VECTOR('',#128924,1.); +#128924 = DIRECTION('',(7.123512188196E-02,0.997459551767,0.)); +#128925 = ORIENTED_EDGE('',*,*,#128926,.T.); +#128926 = EDGE_CURVE('',#128919,#128927,#128929,.T.); +#128927 = VERTEX_POINT('',#128928); +#128928 = CARTESIAN_POINT('',(99.952508,-135.221594,1.585)); +#128929 = LINE('',#128930,#128931); +#128930 = CARTESIAN_POINT('',(99.840449,-135.501753,1.585)); +#128931 = VECTOR('',#128932,1.); +#128932 = DIRECTION('',(0.371377534097,0.92848194768,0.)); +#128933 = ORIENTED_EDGE('',*,*,#128934,.T.); +#128934 = EDGE_CURVE('',#128927,#128935,#128937,.T.); +#128935 = VERTEX_POINT('',#128936); +#128936 = CARTESIAN_POINT('',(100.101929,-135.016147,1.585)); +#128937 = LINE('',#128938,#128939); +#128938 = CARTESIAN_POINT('',(99.952508,-135.221594,1.585)); +#128939 = VECTOR('',#128940,1.); +#128940 = DIRECTION('',(0.588184570774,0.808726721892,0.)); +#128941 = ORIENTED_EDGE('',*,*,#128942,.T.); +#128942 = EDGE_CURVE('',#128935,#128943,#128945,.T.); +#128943 = VERTEX_POINT('',#128944); +#128944 = CARTESIAN_POINT('',(100.326051,-134.810694,1.585)); +#128945 = LINE('',#128946,#128947); +#128946 = CARTESIAN_POINT('',(100.101929,-135.016147,1.585)); +#128947 = VECTOR('',#128948,1.); +#128948 = DIRECTION('',(0.737141306692,0.675738628442,0.)); +#128949 = ORIENTED_EDGE('',*,*,#128950,.T.); +#128950 = EDGE_CURVE('',#128943,#128951,#128953,.T.); +#128951 = VERTEX_POINT('',#128952); +#128952 = CARTESIAN_POINT('',(100.512822,-134.69863,1.585)); +#128953 = LINE('',#128954,#128955); +#128954 = CARTESIAN_POINT('',(100.326051,-134.810694,1.585)); +#128955 = VECTOR('',#128956,1.); +#128956 = DIRECTION('',(0.857490090001,0.514500481584,0.)); +#128957 = ORIENTED_EDGE('',*,*,#128958,.T.); +#128958 = EDGE_CURVE('',#128951,#128564,#128959,.T.); +#128959 = LINE('',#128960,#128961); +#128960 = CARTESIAN_POINT('',(100.512822,-134.69863,1.585)); +#128961 = VECTOR('',#128962,1.); +#128962 = DIRECTION('',(0.939801970818,0.341719557016,0.)); +#128963 = FACE_BOUND('',#128964,.F.); +#128964 = EDGE_LOOP('',(#128965,#128976,#128984,#128992,#129000,#129008, + #129016,#129024,#129032)); +#128965 = ORIENTED_EDGE('',*,*,#128966,.T.); +#128966 = EDGE_CURVE('',#128967,#128969,#128971,.T.); +#128967 = VERTEX_POINT('',#128968); +#128968 = CARTESIAN_POINT('',(101.353294,-135.146882,1.585)); +#128969 = VERTEX_POINT('',#128970); +#128970 = CARTESIAN_POINT('',(100.830337,-135.146882,1.585)); +#128971 = CIRCLE('',#128972,0.537898577025); +#128972 = AXIS2_PLACEMENT_3D('',#128973,#128974,#128975); +#128973 = CARTESIAN_POINT('',(101.0918155,-135.6169499453,1.585)); +#128974 = DIRECTION('',(0.,0.,1.)); +#128975 = DIRECTION('',(0.486111157695,0.873896986129,-0.)); +#128976 = ORIENTED_EDGE('',*,*,#128977,.T.); +#128977 = EDGE_CURVE('',#128969,#128978,#128980,.T.); +#128978 = VERTEX_POINT('',#128979); +#128979 = CARTESIAN_POINT('',(100.736954,-135.221594,1.585)); +#128980 = LINE('',#128981,#128982); +#128981 = CARTESIAN_POINT('',(100.830337,-135.146882,1.585)); +#128982 = VECTOR('',#128983,1.); +#128983 = DIRECTION('',(-0.780845967048,-0.624723599478,0.)); +#128984 = ORIENTED_EDGE('',*,*,#128985,.T.); +#128985 = EDGE_CURVE('',#128978,#128986,#128988,.T.); +#128986 = VERTEX_POINT('',#128987); +#128987 = CARTESIAN_POINT('',(100.643568,-135.389689,1.585)); +#128988 = LINE('',#128989,#128990); +#128989 = CARTESIAN_POINT('',(100.736954,-135.221594,1.585)); +#128990 = VECTOR('',#128991,1.); +#128991 = DIRECTION('',(-0.485642489637,-0.874157521422,0.)); +#128992 = ORIENTED_EDGE('',*,*,#128993,.T.); +#128993 = EDGE_CURVE('',#128986,#128994,#128996,.T.); +#128994 = VERTEX_POINT('',#128995); +#128995 = CARTESIAN_POINT('',(100.662238,-135.483078,1.585)); +#128996 = LINE('',#128997,#128998); +#128997 = CARTESIAN_POINT('',(100.643568,-135.389689,1.585)); +#128998 = VECTOR('',#128999,1.); +#128999 = DIRECTION('',(0.196037383548,-0.98059642272,0.)); +#129000 = ORIENTED_EDGE('',*,*,#129001,.T.); +#129001 = EDGE_CURVE('',#128994,#129002,#129004,.T.); +#129002 = VERTEX_POINT('',#129003); +#129003 = CARTESIAN_POINT('',(101.52139,-135.483078,1.585)); +#129004 = LINE('',#129005,#129006); +#129005 = CARTESIAN_POINT('',(100.662238,-135.483078,1.585)); +#129006 = VECTOR('',#129007,1.); +#129007 = DIRECTION('',(1.,0.,0.)); +#129008 = ORIENTED_EDGE('',*,*,#129009,.T.); +#129009 = EDGE_CURVE('',#129002,#129010,#129012,.T.); +#129010 = VERTEX_POINT('',#129011); +#129011 = CARTESIAN_POINT('',(101.540064,-135.464395,1.585)); +#129012 = LINE('',#129013,#129014); +#129013 = CARTESIAN_POINT('',(101.52139,-135.483078,1.585)); +#129014 = VECTOR('',#129015,1.); +#129015 = DIRECTION('',(0.706936405422,0.70727711591,0.)); +#129016 = ORIENTED_EDGE('',*,*,#129017,.T.); +#129017 = EDGE_CURVE('',#129010,#129018,#129020,.T.); +#129018 = VERTEX_POINT('',#129019); +#129019 = CARTESIAN_POINT('',(101.540064,-135.389689,1.585)); +#129020 = LINE('',#129021,#129022); +#129021 = CARTESIAN_POINT('',(101.540064,-135.464395,1.585)); +#129022 = VECTOR('',#129023,1.); +#129023 = DIRECTION('',(0.,1.,0.)); +#129024 = ORIENTED_EDGE('',*,*,#129025,.T.); +#129025 = EDGE_CURVE('',#129018,#129026,#129028,.T.); +#129026 = VERTEX_POINT('',#129027); +#129027 = CARTESIAN_POINT('',(101.48404,-135.277626,1.585)); +#129028 = LINE('',#129029,#129030); +#129029 = CARTESIAN_POINT('',(101.540064,-135.389689,1.585)); +#129030 = VECTOR('',#129031,1.); +#129031 = DIRECTION('',(-0.447165704772,0.894451134761,0.)); +#129032 = ORIENTED_EDGE('',*,*,#129033,.T.); +#129033 = EDGE_CURVE('',#129026,#128967,#129034,.T.); +#129034 = LINE('',#129035,#129036); +#129035 = CARTESIAN_POINT('',(101.48404,-135.277626,1.585)); +#129036 = VECTOR('',#129037,1.); +#129037 = DIRECTION('',(-0.707112189455,0.707101372877,0.)); +#129038 = PLANE('',#129039); +#129039 = AXIS2_PLACEMENT_3D('',#129040,#129041,#129042); +#129040 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129041 = DIRECTION('',(0.,0.,1.)); +#129042 = DIRECTION('',(1.,0.,-0.)); +#129043 = SHELL_BASED_SURFACE_MODEL('',(#129044)); +#129044 = OPEN_SHELL('',(#129045)); +#129045 = ADVANCED_FACE('',(#129046,#129377),#129467,.T.); +#129046 = FACE_BOUND('',#129047,.F.); +#129047 = EDGE_LOOP('',(#129048,#129058,#129066,#129074,#129082,#129091, + #129099,#129107,#129115,#129123,#129131,#129139,#129147,#129155, + #129163,#129171,#129179,#129187,#129195,#129203,#129211,#129219, + #129227,#129235,#129243,#129251,#129259,#129267,#129275,#129283, + #129291,#129299,#129307,#129315,#129323,#129331,#129339,#129347, + #129355,#129363,#129371)); +#129048 = ORIENTED_EDGE('',*,*,#129049,.T.); +#129049 = EDGE_CURVE('',#129050,#129052,#129054,.T.); +#129050 = VERTEX_POINT('',#129051); +#129051 = CARTESIAN_POINT('',(107.722203,-134.642604,1.585)); +#129052 = VERTEX_POINT('',#129053); +#129053 = CARTESIAN_POINT('',(107.983684,-134.58657,1.585)); +#129054 = LINE('',#129055,#129056); +#129055 = CARTESIAN_POINT('',(107.722203,-134.642604,1.585)); +#129056 = VECTOR('',#129057,1.); +#129057 = DIRECTION('',(0.97780060815,0.209537516214,0.)); +#129058 = ORIENTED_EDGE('',*,*,#129059,.T.); +#129059 = EDGE_CURVE('',#129052,#129060,#129062,.T.); +#129060 = VERTEX_POINT('',#129061); +#129061 = CARTESIAN_POINT('',(108.338556,-134.58657,1.585)); +#129062 = LINE('',#129063,#129064); +#129063 = CARTESIAN_POINT('',(107.983684,-134.58657,1.585)); +#129064 = VECTOR('',#129065,1.); +#129065 = DIRECTION('',(1.,0.,0.)); +#129066 = ORIENTED_EDGE('',*,*,#129067,.T.); +#129067 = EDGE_CURVE('',#129060,#129068,#129070,.T.); +#129068 = VERTEX_POINT('',#129069); +#129069 = CARTESIAN_POINT('',(108.357233,-134.605251,1.585)); +#129070 = LINE('',#129071,#129072); +#129071 = CARTESIAN_POINT('',(108.338556,-134.58657,1.585)); +#129072 = VECTOR('',#129073,1.); +#129073 = DIRECTION('',(0.707031065716,-0.70718248855,0.)); +#129074 = ORIENTED_EDGE('',*,*,#129075,.T.); +#129075 = EDGE_CURVE('',#129068,#129076,#129078,.T.); +#129076 = VERTEX_POINT('',#129077); +#129077 = CARTESIAN_POINT('',(108.562671,-134.623926,1.585)); +#129078 = LINE('',#129079,#129080); +#129079 = CARTESIAN_POINT('',(108.357233,-134.605251,1.585)); +#129080 = VECTOR('',#129081,1.); +#129081 = DIRECTION('',(0.995893723006,-9.053006394693E-02,0.)); +#129082 = ORIENTED_EDGE('',*,*,#129083,.T.); +#129083 = EDGE_CURVE('',#129076,#129084,#129086,.T.); +#129084 = VERTEX_POINT('',#129085); +#129085 = CARTESIAN_POINT('',(109.085637,-134.922758,1.585)); +#129086 = CIRCLE('',#129087,1.146020975985); +#129087 = AXIS2_PLACEMENT_3D('',#129088,#129089,#129090); +#129088 = CARTESIAN_POINT('',(108.27556019975,-135.7333995083,1.585)); +#129089 = DIRECTION('',(0.,0.,-1.)); +#129090 = DIRECTION('',(0.250528398927,0.968109250721,0.)); +#129091 = ORIENTED_EDGE('',*,*,#129092,.T.); +#129092 = EDGE_CURVE('',#129084,#129093,#129095,.T.); +#129093 = VERTEX_POINT('',#129094); +#129094 = CARTESIAN_POINT('',(109.253732,-135.146882,1.585)); +#129095 = LINE('',#129096,#129097); +#129096 = CARTESIAN_POINT('',(109.085637,-134.922758,1.585)); +#129097 = VECTOR('',#129098,1.); +#129098 = DIRECTION('',(0.60000456887,-0.799996573327,0.)); +#129099 = ORIENTED_EDGE('',*,*,#129100,.T.); +#129100 = EDGE_CURVE('',#129093,#129101,#129103,.T.); +#129101 = VERTEX_POINT('',#129102); +#129102 = CARTESIAN_POINT('',(109.328435,-135.314983,1.585)); +#129103 = LINE('',#129104,#129105); +#129104 = CARTESIAN_POINT('',(109.253732,-135.146882,1.585)); +#129105 = VECTOR('',#129106,1.); +#129106 = DIRECTION('',(0.406099627759,-0.913828809096,0.)); +#129107 = ORIENTED_EDGE('',*,*,#129108,.T.); +#129108 = EDGE_CURVE('',#129101,#129109,#129111,.T.); +#129109 = VERTEX_POINT('',#129110); +#129110 = CARTESIAN_POINT('',(109.384474,-135.52043,1.585)); +#129111 = LINE('',#129112,#129113); +#129112 = CARTESIAN_POINT('',(109.328435,-135.314983,1.585)); +#129113 = VECTOR('',#129114,1.); +#129114 = DIRECTION('',(0.263152371858,-0.964754284357,0.)); +#129115 = ORIENTED_EDGE('',*,*,#129116,.T.); +#129116 = EDGE_CURVE('',#129109,#129117,#129119,.T.); +#129117 = VERTEX_POINT('',#129118); +#129118 = CARTESIAN_POINT('',(109.403146,-135.893978,1.585)); +#129119 = LINE('',#129120,#129121); +#129120 = CARTESIAN_POINT('',(109.384474,-135.52043,1.585)); +#129121 = VECTOR('',#129122,1.); +#129122 = DIRECTION('',(4.99232149958E-02,-0.998753058871,0.)); +#129123 = ORIENTED_EDGE('',*,*,#129124,.T.); +#129124 = EDGE_CURVE('',#129117,#129125,#129127,.T.); +#129125 = VERTEX_POINT('',#129126); +#129126 = CARTESIAN_POINT('',(109.384474,-135.912655,1.585)); +#129127 = LINE('',#129128,#129129); +#129128 = CARTESIAN_POINT('',(109.403146,-135.893978,1.585)); +#129129 = VECTOR('',#129130,1.); +#129130 = DIRECTION('',(-0.707012112775,-0.707201436926,0.)); +#129131 = ORIENTED_EDGE('',*,*,#129132,.T.); +#129132 = EDGE_CURVE('',#129125,#129133,#129135,.T.); +#129133 = VERTEX_POINT('',#129134); +#129134 = CARTESIAN_POINT('',(107.703527,-135.912655,1.585)); +#129135 = LINE('',#129136,#129137); +#129136 = CARTESIAN_POINT('',(109.384474,-135.912655,1.585)); +#129137 = VECTOR('',#129138,1.); +#129138 = DIRECTION('',(-1.,0.,0.)); +#129139 = ORIENTED_EDGE('',*,*,#129140,.T.); +#129140 = EDGE_CURVE('',#129133,#129141,#129143,.T.); +#129141 = VERTEX_POINT('',#129142); +#129142 = CARTESIAN_POINT('',(107.684852,-135.931327,1.585)); +#129143 = LINE('',#129144,#129145); +#129144 = CARTESIAN_POINT('',(107.703527,-135.912655,1.585)); +#129145 = VECTOR('',#129146,1.); +#129146 = DIRECTION('',(-0.707163579192,-0.707049978618,0.)); +#129147 = ORIENTED_EDGE('',*,*,#129148,.T.); +#129148 = EDGE_CURVE('',#129141,#129149,#129151,.T.); +#129149 = VERTEX_POINT('',#129150); +#129150 = CARTESIAN_POINT('',(107.703527,-136.080742,1.585)); +#129151 = LINE('',#129152,#129153); +#129152 = CARTESIAN_POINT('',(107.684852,-135.931327,1.585)); +#129153 = VECTOR('',#129154,1.); +#129154 = DIRECTION('',(0.124022474094,-0.992279409199,0.)); +#129155 = ORIENTED_EDGE('',*,*,#129156,.T.); +#129156 = EDGE_CURVE('',#129149,#129157,#129159,.T.); +#129157 = VERTEX_POINT('',#129158); +#129158 = CARTESIAN_POINT('',(107.759564,-136.192802,1.585)); +#129159 = LINE('',#129160,#129161); +#129160 = CARTESIAN_POINT('',(107.703527,-136.080742,1.585)); +#129161 = VECTOR('',#129162,1.); +#129162 = DIRECTION('',(0.447258291239,-0.894404841734,0.)); +#129163 = ORIENTED_EDGE('',*,*,#129164,.T.); +#129164 = EDGE_CURVE('',#129157,#129165,#129167,.T.); +#129165 = VERTEX_POINT('',#129166); +#129166 = CARTESIAN_POINT('',(107.92765,-136.342221,1.585)); +#129167 = LINE('',#129168,#129169); +#129168 = CARTESIAN_POINT('',(107.759564,-136.192802,1.585)); +#129169 = VECTOR('',#129170,1.); +#129170 = DIRECTION('',(0.747388956577,-0.664386745492,0.)); +#129171 = ORIENTED_EDGE('',*,*,#129172,.T.); +#129172 = EDGE_CURVE('',#129165,#129173,#129175,.T.); +#129173 = VERTEX_POINT('',#129174); +#129174 = CARTESIAN_POINT('',(108.058396,-136.379579,1.585)); +#129175 = LINE('',#129176,#129177); +#129176 = CARTESIAN_POINT('',(107.92765,-136.342221,1.585)); +#129177 = VECTOR('',#129178,1.); +#129178 = DIRECTION('',(0.961520062356,-0.27473472603,0.)); +#129179 = ORIENTED_EDGE('',*,*,#129180,.T.); +#129180 = EDGE_CURVE('',#129173,#129181,#129183,.T.); +#129181 = VERTEX_POINT('',#129182); +#129182 = CARTESIAN_POINT('',(108.095754,-136.416931,1.585)); +#129183 = LINE('',#129184,#129185); +#129184 = CARTESIAN_POINT('',(108.058396,-136.379579,1.585)); +#129185 = VECTOR('',#129186,1.); +#129186 = DIRECTION('',(0.707163567029,-0.707049990783,0.)); +#129187 = ORIENTED_EDGE('',*,*,#129188,.T.); +#129188 = EDGE_CURVE('',#129181,#129189,#129191,.T.); +#129189 = VERTEX_POINT('',#129190); +#129190 = CARTESIAN_POINT('',(108.375903,-136.416931,1.585)); +#129191 = LINE('',#129192,#129193); +#129192 = CARTESIAN_POINT('',(108.095754,-136.416931,1.585)); +#129193 = VECTOR('',#129194,1.); +#129194 = DIRECTION('',(1.,0.,0.)); +#129195 = ORIENTED_EDGE('',*,*,#129196,.T.); +#129196 = EDGE_CURVE('',#129189,#129197,#129199,.T.); +#129197 = VERTEX_POINT('',#129198); +#129198 = CARTESIAN_POINT('',(108.413261,-136.379579,1.585)); +#129199 = LINE('',#129200,#129201); +#129200 = CARTESIAN_POINT('',(108.375903,-136.416931,1.585)); +#129201 = VECTOR('',#129202,1.); +#129202 = DIRECTION('',(0.707163567029,0.707049990783,0.)); +#129203 = ORIENTED_EDGE('',*,*,#129204,.T.); +#129204 = EDGE_CURVE('',#129197,#129205,#129207,.T.); +#129205 = VERTEX_POINT('',#129206); +#129206 = CARTESIAN_POINT('',(108.562671,-136.342221,1.585)); +#129207 = LINE('',#129208,#129209); +#129208 = CARTESIAN_POINT('',(108.413261,-136.379579,1.585)); +#129209 = VECTOR('',#129210,1.); +#129210 = DIRECTION('',(0.970134096728,0.242569236233,0.)); +#129211 = ORIENTED_EDGE('',*,*,#129212,.T.); +#129212 = EDGE_CURVE('',#129205,#129213,#129215,.T.); +#129213 = VERTEX_POINT('',#129214); +#129214 = CARTESIAN_POINT('',(108.805477,-136.155451,1.585)); +#129215 = LINE('',#129216,#129217); +#129216 = CARTESIAN_POINT('',(108.562671,-136.342221,1.585)); +#129217 = VECTOR('',#129218,1.); +#129218 = DIRECTION('',(0.792630056832,0.609702872723,0.)); +#129219 = ORIENTED_EDGE('',*,*,#129220,.T.); +#129220 = EDGE_CURVE('',#129213,#129221,#129223,.T.); +#129221 = VERTEX_POINT('',#129222); +#129222 = CARTESIAN_POINT('',(109.309767,-136.416931,1.585)); +#129223 = LINE('',#129224,#129225); +#129224 = CARTESIAN_POINT('',(108.805477,-136.155451,1.585)); +#129225 = VECTOR('',#129226,1.); +#129226 = DIRECTION('',(0.887757195838,-0.460312025953,0.)); +#129227 = ORIENTED_EDGE('',*,*,#129228,.T.); +#129228 = EDGE_CURVE('',#129221,#129229,#129231,.T.); +#129229 = VERTEX_POINT('',#129230); +#129230 = CARTESIAN_POINT('',(109.347119,-136.454291,1.585)); +#129231 = LINE('',#129232,#129233); +#129232 = CARTESIAN_POINT('',(109.309767,-136.416931,1.585)); +#129233 = VECTOR('',#129234,1.); +#129234 = DIRECTION('',(0.707031061663,-0.707182492603,0.)); +#129235 = ORIENTED_EDGE('',*,*,#129236,.T.); +#129236 = EDGE_CURVE('',#129229,#129237,#129239,.T.); +#129237 = VERTEX_POINT('',#129238); +#129238 = CARTESIAN_POINT('',(109.216381,-136.641059,1.585)); +#129239 = LINE('',#129240,#129241); +#129240 = CARTESIAN_POINT('',(109.347119,-136.454291,1.585)); +#129241 = VECTOR('',#129242,1.); +#129242 = DIRECTION('',(-0.573463521908,-0.819231096236,0.)); +#129243 = ORIENTED_EDGE('',*,*,#129244,.T.); +#129244 = EDGE_CURVE('',#129237,#129245,#129247,.T.); +#129245 = VERTEX_POINT('',#129246); +#129246 = CARTESIAN_POINT('',(108.936211,-136.846511,1.585)); +#129247 = LINE('',#129248,#129249); +#129248 = CARTESIAN_POINT('',(109.216381,-136.641059,1.585)); +#129249 = VECTOR('',#129250,1.); +#129250 = DIRECTION('',(-0.806413231375,-0.59135243321,0.)); +#129251 = ORIENTED_EDGE('',*,*,#129252,.T.); +#129252 = EDGE_CURVE('',#129245,#129253,#129255,.T.); +#129253 = VERTEX_POINT('',#129254); +#129254 = CARTESIAN_POINT('',(108.618703,-136.97725,1.585)); +#129255 = LINE('',#129256,#129257); +#129256 = CARTESIAN_POINT('',(108.936211,-136.846511,1.585)); +#129257 = VECTOR('',#129258,1.); +#129258 = DIRECTION('',(-0.924677676277,-0.380750830589,0.)); +#129259 = ORIENTED_EDGE('',*,*,#129260,.T.); +#129260 = EDGE_CURVE('',#129253,#129261,#129263,.T.); +#129261 = VERTEX_POINT('',#129262); +#129262 = CARTESIAN_POINT('',(108.431933,-137.014602,1.585)); +#129263 = LINE('',#129264,#129265); +#129264 = CARTESIAN_POINT('',(108.618703,-136.97725,1.585)); +#129265 = VECTOR('',#129266,1.); +#129266 = DIRECTION('',(-0.980582694952,-0.19610603856,0.)); +#129267 = ORIENTED_EDGE('',*,*,#129268,.T.); +#129268 = EDGE_CURVE('',#129261,#129269,#129271,.T.); +#129269 = VERTEX_POINT('',#129270); +#129270 = CARTESIAN_POINT('',(107.92765,-137.014602,1.585)); +#129271 = LINE('',#129272,#129273); +#129272 = CARTESIAN_POINT('',(108.431933,-137.014602,1.585)); +#129273 = VECTOR('',#129274,1.); +#129274 = DIRECTION('',(-1.,0.,0.)); +#129275 = ORIENTED_EDGE('',*,*,#129276,.T.); +#129276 = EDGE_CURVE('',#129269,#129277,#129279,.T.); +#129277 = VERTEX_POINT('',#129278); +#129278 = CARTESIAN_POINT('',(107.610144,-136.921217,1.585)); +#129279 = LINE('',#129280,#129281); +#129280 = CARTESIAN_POINT('',(107.92765,-137.014602,1.585)); +#129281 = VECTOR('',#129282,1.); +#129282 = DIRECTION('',(-0.959364779857,0.282168777809,0.)); +#129283 = ORIENTED_EDGE('',*,*,#129284,.T.); +#129284 = EDGE_CURVE('',#129277,#129285,#129287,.T.); +#129285 = VERTEX_POINT('',#129286); +#129286 = CARTESIAN_POINT('',(107.367339,-136.771798,1.585)); +#129287 = LINE('',#129288,#129289); +#129288 = CARTESIAN_POINT('',(107.610144,-136.921217,1.585)); +#129289 = VECTOR('',#129290,1.); +#129290 = DIRECTION('',(-0.85165747368,0.524098795576,0.)); +#129291 = ORIENTED_EDGE('',*,*,#129292,.T.); +#129292 = EDGE_CURVE('',#129285,#129293,#129295,.T.); +#129293 = VERTEX_POINT('',#129294); +#129294 = CARTESIAN_POINT('',(107.049829,-136.454291,1.585)); +#129295 = LINE('',#129296,#129297); +#129296 = CARTESIAN_POINT('',(107.367339,-136.771798,1.585)); +#129297 = VECTOR('',#129298,1.); +#129298 = DIRECTION('',(-0.707110121751,0.707103440606,0.)); +#129299 = ORIENTED_EDGE('',*,*,#129300,.T.); +#129300 = EDGE_CURVE('',#129293,#129301,#129303,.T.); +#129301 = VERTEX_POINT('',#129302); +#129302 = CARTESIAN_POINT('',(107.049829,-136.416931,1.585)); +#129303 = LINE('',#129304,#129305); +#129304 = CARTESIAN_POINT('',(107.049829,-136.454291,1.585)); +#129305 = VECTOR('',#129306,1.); +#129306 = DIRECTION('',(0.,1.,0.)); +#129307 = ORIENTED_EDGE('',*,*,#129308,.T.); +#129308 = EDGE_CURVE('',#129301,#129309,#129311,.T.); +#129309 = VERTEX_POINT('',#129310); +#129310 = CARTESIAN_POINT('',(106.919087,-136.155451,1.585)); +#129311 = LINE('',#129312,#129313); +#129312 = CARTESIAN_POINT('',(107.049829,-136.416931,1.585)); +#129313 = VECTOR('',#129314,1.); +#129314 = DIRECTION('',(-0.447219068488,0.894424454485,0.)); +#129315 = ORIENTED_EDGE('',*,*,#129316,.T.); +#129316 = EDGE_CURVE('',#129309,#129317,#129319,.T.); +#129317 = VERTEX_POINT('',#129318); +#129318 = CARTESIAN_POINT('',(106.900419,-135.968676,1.585)); +#129319 = LINE('',#129320,#129321); +#129320 = CARTESIAN_POINT('',(106.919087,-136.155451,1.585)); +#129321 = VECTOR('',#129322,1.); +#129322 = DIRECTION('',(-9.945360882754E-02,0.995042199955,0.)); +#129323 = ORIENTED_EDGE('',*,*,#129324,.T.); +#129324 = EDGE_CURVE('',#129317,#129325,#129327,.T.); +#129325 = VERTEX_POINT('',#129326); +#129326 = CARTESIAN_POINT('',(106.88174,-135.95,1.585)); +#129327 = LINE('',#129328,#129329); +#129328 = CARTESIAN_POINT('',(106.900419,-135.968676,1.585)); +#129329 = VECTOR('',#129330,1.); +#129330 = DIRECTION('',(-0.707163567029,0.707049990783,0.)); +#129331 = ORIENTED_EDGE('',*,*,#129332,.T.); +#129332 = EDGE_CURVE('',#129325,#129333,#129335,.T.); +#129333 = VERTEX_POINT('',#129334); +#129334 = CARTESIAN_POINT('',(106.88174,-135.66985,1.585)); +#129335 = LINE('',#129336,#129337); +#129336 = CARTESIAN_POINT('',(106.88174,-135.95,1.585)); +#129337 = VECTOR('',#129338,1.); +#129338 = DIRECTION('',(0.,1.,0.)); +#129339 = ORIENTED_EDGE('',*,*,#129340,.T.); +#129340 = EDGE_CURVE('',#129333,#129341,#129343,.T.); +#129341 = VERTEX_POINT('',#129342); +#129342 = CARTESIAN_POINT('',(106.937767,-135.408364,1.585)); +#129343 = LINE('',#129344,#129345); +#129344 = CARTESIAN_POINT('',(106.88174,-135.66985,1.585)); +#129345 = VECTOR('',#129346,1.); +#129346 = DIRECTION('',(0.209508658666,0.977806791725,0.)); +#129347 = ORIENTED_EDGE('',*,*,#129348,.T.); +#129348 = EDGE_CURVE('',#129341,#129349,#129351,.T.); +#129349 = VERTEX_POINT('',#129350); +#129350 = CARTESIAN_POINT('',(107.087188,-135.12821,1.585)); +#129351 = LINE('',#129352,#129353); +#129352 = CARTESIAN_POINT('',(106.937767,-135.408364,1.585)); +#129353 = VECTOR('',#129354,1.); +#129354 = DIRECTION('',(0.470601803164,0.882345704845,0.)); +#129355 = ORIENTED_EDGE('',*,*,#129356,.T.); +#129356 = EDGE_CURVE('',#129349,#129357,#129359,.T.); +#129357 = VERTEX_POINT('',#129358); +#129358 = CARTESIAN_POINT('',(107.348665,-134.848052,1.585)); +#129359 = LINE('',#129360,#129361); +#129360 = CARTESIAN_POINT('',(107.087188,-135.12821,1.585)); +#129361 = VECTOR('',#129362,1.); +#129362 = DIRECTION('',(0.682312950851,0.731060214415,0.)); +#129363 = ORIENTED_EDGE('',*,*,#129364,.T.); +#129364 = EDGE_CURVE('',#129357,#129365,#129367,.T.); +#129365 = VERTEX_POINT('',#129366); +#129366 = CARTESIAN_POINT('',(107.516754,-134.735986,1.585)); +#129367 = LINE('',#129368,#129369); +#129368 = CARTESIAN_POINT('',(107.348665,-134.848052,1.585)); +#129369 = VECTOR('',#129370,1.); +#129370 = DIRECTION('',(0.832035063355,0.554723042019,0.)); +#129371 = ORIENTED_EDGE('',*,*,#129372,.T.); +#129372 = EDGE_CURVE('',#129365,#129050,#129373,.T.); +#129373 = LINE('',#129374,#129375); +#129374 = CARTESIAN_POINT('',(107.516754,-134.735986,1.585)); +#129375 = VECTOR('',#129376,1.); +#129376 = DIRECTION('',(0.910373002656,0.413788588575,0.)); +#129377 = FACE_BOUND('',#129378,.F.); +#129378 = EDGE_LOOP('',(#129379,#129389,#129397,#129405,#129413,#129421, + #129429,#129437,#129445,#129453,#129461)); +#129379 = ORIENTED_EDGE('',*,*,#129380,.T.); +#129380 = EDGE_CURVE('',#129381,#129383,#129385,.T.); +#129381 = VERTEX_POINT('',#129382); +#129382 = CARTESIAN_POINT('',(108.394584,-135.12821,1.585)); +#129383 = VERTEX_POINT('',#129384); +#129384 = CARTESIAN_POINT('',(108.282521,-135.090853,1.585)); +#129385 = LINE('',#129386,#129387); +#129386 = CARTESIAN_POINT('',(108.394584,-135.12821,1.585)); +#129387 = VECTOR('',#129388,1.); +#129388 = DIRECTION('',(-0.948676525382,0.316248083298,0.)); +#129389 = ORIENTED_EDGE('',*,*,#129390,.T.); +#129390 = EDGE_CURVE('',#129383,#129391,#129393,.T.); +#129391 = VERTEX_POINT('',#129392); +#129392 = CARTESIAN_POINT('',(108.077073,-135.090853,1.585)); +#129393 = LINE('',#129394,#129395); +#129394 = CARTESIAN_POINT('',(108.282521,-135.090853,1.585)); +#129395 = VECTOR('',#129396,1.); +#129396 = DIRECTION('',(-1.,0.,0.)); +#129397 = ORIENTED_EDGE('',*,*,#129398,.T.); +#129398 = EDGE_CURVE('',#129391,#129399,#129401,.T.); +#129399 = VERTEX_POINT('',#129400); +#129400 = CARTESIAN_POINT('',(107.946336,-135.12821,1.585)); +#129401 = LINE('',#129402,#129403); +#129402 = CARTESIAN_POINT('',(108.077073,-135.090853,1.585)); +#129403 = VECTOR('',#129404,1.); +#129404 = DIRECTION('',(-0.961517009042,-0.274745411833,0.)); +#129405 = ORIENTED_EDGE('',*,*,#129406,.T.); +#129406 = EDGE_CURVE('',#129399,#129407,#129409,.T.); +#129407 = VERTEX_POINT('',#129408); +#129408 = CARTESIAN_POINT('',(107.796908,-135.258954,1.585)); +#129409 = LINE('',#129410,#129411); +#129410 = CARTESIAN_POINT('',(107.946336,-135.12821,1.585)); +#129411 = VECTOR('',#129412,1.); +#129412 = DIRECTION('',(-0.752590422281,-0.658488918882,0.)); +#129413 = ORIENTED_EDGE('',*,*,#129414,.T.); +#129414 = EDGE_CURVE('',#129407,#129415,#129417,.T.); +#129415 = VERTEX_POINT('',#129416); +#129416 = CARTESIAN_POINT('',(107.722203,-135.389689,1.585)); +#129417 = LINE('',#129418,#129419); +#129418 = CARTESIAN_POINT('',(107.796908,-135.258954,1.585)); +#129419 = VECTOR('',#129420,1.); +#129420 = DIRECTION('',(-0.496135362289,-0.868245185582,0.)); +#129421 = ORIENTED_EDGE('',*,*,#129422,.T.); +#129422 = EDGE_CURVE('',#129415,#129423,#129425,.T.); +#129423 = VERTEX_POINT('',#129424); +#129424 = CARTESIAN_POINT('',(107.740881,-135.483078,1.585)); +#129425 = LINE('',#129426,#129427); +#129426 = CARTESIAN_POINT('',(107.722203,-135.389689,1.585)); +#129427 = VECTOR('',#129428,1.); +#129428 = DIRECTION('',(0.19611815436,-0.980580271844,0.)); +#129429 = ORIENTED_EDGE('',*,*,#129430,.T.); +#129430 = EDGE_CURVE('',#129423,#129431,#129433,.T.); +#129431 = VERTEX_POINT('',#129432); +#129432 = CARTESIAN_POINT('',(108.618703,-135.483078,1.585)); +#129433 = LINE('',#129434,#129435); +#129434 = CARTESIAN_POINT('',(107.740881,-135.483078,1.585)); +#129435 = VECTOR('',#129436,1.); +#129436 = DIRECTION('',(1.,0.,0.)); +#129437 = ORIENTED_EDGE('',*,*,#129438,.T.); +#129438 = EDGE_CURVE('',#129431,#129439,#129441,.T.); +#129439 = VERTEX_POINT('',#129440); +#129440 = CARTESIAN_POINT('',(108.637389,-135.464395,1.585)); +#129441 = LINE('',#129442,#129443); +#129442 = CARTESIAN_POINT('',(108.618703,-135.483078,1.585)); +#129443 = VECTOR('',#129444,1.); +#129444 = DIRECTION('',(0.707163545756,0.70705001206,0.)); +#129445 = ORIENTED_EDGE('',*,*,#129446,.T.); +#129446 = EDGE_CURVE('',#129439,#129447,#129449,.T.); +#129447 = VERTEX_POINT('',#129448); +#129448 = CARTESIAN_POINT('',(108.600035,-135.333658,1.585)); +#129449 = LINE('',#129450,#129451); +#129450 = CARTESIAN_POINT('',(108.637389,-135.464395,1.585)); +#129451 = VECTOR('',#129452,1.); +#129452 = DIRECTION('',(-0.274725013362,0.961522837499,0.)); +#129453 = ORIENTED_EDGE('',*,*,#129454,.T.); +#129454 = EDGE_CURVE('',#129447,#129455,#129457,.T.); +#129455 = VERTEX_POINT('',#129456); +#129456 = CARTESIAN_POINT('',(108.544,-135.258954,1.585)); +#129457 = LINE('',#129458,#129459); +#129458 = CARTESIAN_POINT('',(108.600035,-135.333658,1.585)); +#129459 = VECTOR('',#129460,1.); +#129460 = DIRECTION('',(-0.600047972775,0.799964018171,0.)); +#129461 = ORIENTED_EDGE('',*,*,#129462,.T.); +#129462 = EDGE_CURVE('',#129455,#129381,#129463,.T.); +#129463 = LINE('',#129464,#129465); +#129464 = CARTESIAN_POINT('',(108.544,-135.258954,1.585)); +#129465 = VECTOR('',#129466,1.); +#129466 = DIRECTION('',(-0.752564214242,0.658518870984,0.)); +#129467 = PLANE('',#129468); +#129468 = AXIS2_PLACEMENT_3D('',#129469,#129470,#129471); +#129469 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129470 = DIRECTION('',(0.,0.,1.)); +#129471 = DIRECTION('',(1.,0.,-0.)); +#129472 = SHELL_BASED_SURFACE_MODEL('',(#129473)); +#129473 = OPEN_SHELL('',(#129474)); +#129474 = ADVANCED_FACE('',(#129475),#129621,.T.); +#129475 = FACE_BOUND('',#129476,.F.); +#129476 = EDGE_LOOP('',(#129477,#129487,#129495,#129503,#129511,#129519, + #129527,#129535,#129543,#129551,#129559,#129567,#129575,#129583, + #129591,#129599,#129607,#129615)); +#129477 = ORIENTED_EDGE('',*,*,#129478,.T.); +#129478 = EDGE_CURVE('',#129479,#129481,#129483,.T.); +#129479 = VERTEX_POINT('',#129480); +#129480 = CARTESIAN_POINT('',(96.553274,-133.241827,1.585)); +#129481 = VERTEX_POINT('',#129482); +#129482 = CARTESIAN_POINT('',(96.571949,-133.223141,1.585)); +#129483 = LINE('',#129484,#129485); +#129484 = CARTESIAN_POINT('',(96.553274,-133.241827,1.585)); +#129485 = VECTOR('',#129486,1.); +#129486 = DIRECTION('',(0.706898560869,0.707314940208,0.)); +#129487 = ORIENTED_EDGE('',*,*,#129488,.T.); +#129488 = EDGE_CURVE('',#129481,#129489,#129491,.T.); +#129489 = VERTEX_POINT('',#129490); +#129490 = CARTESIAN_POINT('',(97.375065,-133.223141,1.585)); +#129491 = LINE('',#129492,#129493); +#129492 = CARTESIAN_POINT('',(96.571949,-133.223141,1.585)); +#129493 = VECTOR('',#129494,1.); +#129494 = DIRECTION('',(1.,0.,0.)); +#129495 = ORIENTED_EDGE('',*,*,#129496,.T.); +#129496 = EDGE_CURVE('',#129489,#129497,#129499,.T.); +#129497 = VERTEX_POINT('',#129498); +#129498 = CARTESIAN_POINT('',(97.375065,-134.69863,1.585)); +#129499 = LINE('',#129500,#129501); +#129500 = CARTESIAN_POINT('',(97.375065,-133.223141,1.585)); +#129501 = VECTOR('',#129502,1.); +#129502 = DIRECTION('',(0.,-1.,0.)); +#129503 = ORIENTED_EDGE('',*,*,#129504,.T.); +#129504 = EDGE_CURVE('',#129497,#129505,#129507,.T.); +#129505 = VERTEX_POINT('',#129506); +#129506 = CARTESIAN_POINT('',(97.393742,-134.717314,1.585)); +#129507 = LINE('',#129508,#129509); +#129508 = CARTESIAN_POINT('',(97.375065,-134.69863,1.585)); +#129509 = VECTOR('',#129510,1.); +#129510 = DIRECTION('',(0.706974284437,-0.707239253114,0.)); +#129511 = ORIENTED_EDGE('',*,*,#129512,.T.); +#129512 = EDGE_CURVE('',#129505,#129513,#129515,.T.); +#129513 = VERTEX_POINT('',#129514); +#129514 = CARTESIAN_POINT('',(98.607755,-134.717314,1.585)); +#129515 = LINE('',#129516,#129517); +#129516 = CARTESIAN_POINT('',(97.393742,-134.717314,1.585)); +#129517 = VECTOR('',#129518,1.); +#129518 = DIRECTION('',(1.,0.,0.)); +#129519 = ORIENTED_EDGE('',*,*,#129520,.T.); +#129520 = EDGE_CURVE('',#129513,#129521,#129523,.T.); +#129521 = VERTEX_POINT('',#129522); +#129522 = CARTESIAN_POINT('',(98.626433,-134.69863,1.585)); +#129523 = LINE('',#129524,#129525); +#129524 = CARTESIAN_POINT('',(98.607755,-134.717314,1.585)); +#129525 = VECTOR('',#129526,1.); +#129526 = DIRECTION('',(0.706993217103,0.707220327034,0.)); +#129527 = ORIENTED_EDGE('',*,*,#129528,.T.); +#129528 = EDGE_CURVE('',#129521,#129529,#129531,.T.); +#129529 = VERTEX_POINT('',#129530); +#129530 = CARTESIAN_POINT('',(98.626433,-133.223141,1.585)); +#129531 = LINE('',#129532,#129533); +#129532 = CARTESIAN_POINT('',(98.626433,-134.69863,1.585)); +#129533 = VECTOR('',#129534,1.); +#129534 = DIRECTION('',(0.,1.,0.)); +#129535 = ORIENTED_EDGE('',*,*,#129536,.T.); +#129536 = EDGE_CURVE('',#129529,#129537,#129539,.T.); +#129537 = VERTEX_POINT('',#129538); +#129538 = CARTESIAN_POINT('',(99.42955,-133.223141,1.585)); +#129539 = LINE('',#129540,#129541); +#129540 = CARTESIAN_POINT('',(98.626433,-133.223141,1.585)); +#129541 = VECTOR('',#129542,1.); +#129542 = DIRECTION('',(1.,0.,0.)); +#129543 = ORIENTED_EDGE('',*,*,#129544,.T.); +#129544 = EDGE_CURVE('',#129537,#129545,#129547,.T.); +#129545 = VERTEX_POINT('',#129546); +#129546 = CARTESIAN_POINT('',(99.448224,-133.241827,1.585)); +#129547 = LINE('',#129548,#129549); +#129548 = CARTESIAN_POINT('',(99.42955,-133.223141,1.585)); +#129549 = VECTOR('',#129550,1.); +#129550 = DIRECTION('',(0.70687962263,-0.707333866792,0.)); +#129551 = ORIENTED_EDGE('',*,*,#129552,.T.); +#129552 = EDGE_CURVE('',#129545,#129553,#129555,.T.); +#129553 = VERTEX_POINT('',#129554); +#129554 = CARTESIAN_POINT('',(99.448224,-136.958569,1.585)); +#129555 = LINE('',#129556,#129557); +#129556 = CARTESIAN_POINT('',(99.448224,-133.241827,1.585)); +#129557 = VECTOR('',#129558,1.); +#129558 = DIRECTION('',(0.,-1.,0.)); +#129559 = ORIENTED_EDGE('',*,*,#129560,.T.); +#129560 = EDGE_CURVE('',#129553,#129561,#129563,.T.); +#129561 = VERTEX_POINT('',#129562); +#129562 = CARTESIAN_POINT('',(98.626433,-136.958569,1.585)); +#129563 = LINE('',#129564,#129565); +#129564 = CARTESIAN_POINT('',(99.448224,-136.958569,1.585)); +#129565 = VECTOR('',#129566,1.); +#129566 = DIRECTION('',(-1.,0.,0.)); +#129567 = ORIENTED_EDGE('',*,*,#129568,.T.); +#129568 = EDGE_CURVE('',#129561,#129569,#129571,.T.); +#129569 = VERTEX_POINT('',#129570); +#129570 = CARTESIAN_POINT('',(98.626433,-135.483078,1.585)); +#129571 = LINE('',#129572,#129573); +#129572 = CARTESIAN_POINT('',(98.626433,-136.958569,1.585)); +#129573 = VECTOR('',#129574,1.); +#129574 = DIRECTION('',(0.,1.,0.)); +#129575 = ORIENTED_EDGE('',*,*,#129576,.T.); +#129576 = EDGE_CURVE('',#129569,#129577,#129579,.T.); +#129577 = VERTEX_POINT('',#129578); +#129578 = CARTESIAN_POINT('',(98.589075,-135.445712,1.585)); +#129579 = LINE('',#129580,#129581); +#129580 = CARTESIAN_POINT('',(98.626433,-135.483078,1.585)); +#129581 = VECTOR('',#129582,1.); +#129582 = DIRECTION('',(-0.707031073823,0.707182480445,0.)); +#129583 = ORIENTED_EDGE('',*,*,#129584,.T.); +#129584 = EDGE_CURVE('',#129577,#129585,#129587,.T.); +#129585 = VERTEX_POINT('',#129586); +#129586 = CARTESIAN_POINT('',(97.431097,-135.445712,1.585)); +#129587 = LINE('',#129588,#129589); +#129588 = CARTESIAN_POINT('',(98.589075,-135.445712,1.585)); +#129589 = VECTOR('',#129590,1.); +#129590 = DIRECTION('',(-1.,0.,0.)); +#129591 = ORIENTED_EDGE('',*,*,#129592,.T.); +#129592 = EDGE_CURVE('',#129585,#129593,#129595,.T.); +#129593 = VERTEX_POINT('',#129594); +#129594 = CARTESIAN_POINT('',(97.375065,-135.501753,1.585)); +#129595 = LINE('',#129596,#129597); +#129596 = CARTESIAN_POINT('',(97.431097,-135.445712,1.585)); +#129597 = VECTOR('',#129598,1.); +#129598 = DIRECTION('',(-0.707049994837,-0.707163562976,0.)); +#129599 = ORIENTED_EDGE('',*,*,#129600,.T.); +#129600 = EDGE_CURVE('',#129593,#129601,#129603,.T.); +#129601 = VERTEX_POINT('',#129602); +#129602 = CARTESIAN_POINT('',(97.375065,-136.958569,1.585)); +#129603 = LINE('',#129604,#129605); +#129604 = CARTESIAN_POINT('',(97.375065,-135.501753,1.585)); +#129605 = VECTOR('',#129606,1.); +#129606 = DIRECTION('',(0.,-1.,0.)); +#129607 = ORIENTED_EDGE('',*,*,#129608,.T.); +#129608 = EDGE_CURVE('',#129601,#129609,#129611,.T.); +#129609 = VERTEX_POINT('',#129610); +#129610 = CARTESIAN_POINT('',(96.553274,-136.958569,1.585)); +#129611 = LINE('',#129612,#129613); +#129612 = CARTESIAN_POINT('',(97.375065,-136.958569,1.585)); +#129613 = VECTOR('',#129614,1.); +#129614 = DIRECTION('',(-1.,0.,0.)); +#129615 = ORIENTED_EDGE('',*,*,#129616,.T.); +#129616 = EDGE_CURVE('',#129609,#129479,#129617,.T.); +#129617 = LINE('',#129618,#129619); +#129618 = CARTESIAN_POINT('',(96.553274,-136.958569,1.585)); +#129619 = VECTOR('',#129620,1.); +#129620 = DIRECTION('',(0.,1.,0.)); +#129621 = PLANE('',#129622); +#129622 = AXIS2_PLACEMENT_3D('',#129623,#129624,#129625); +#129623 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129624 = DIRECTION('',(0.,0.,1.)); +#129625 = DIRECTION('',(1.,0.,-0.)); +#129626 = SHELL_BASED_SURFACE_MODEL('',(#129627)); +#129627 = OPEN_SHELL('',(#129628)); +#129628 = ADVANCED_FACE('',(#129629),#129663,.T.); +#129629 = FACE_BOUND('',#129630,.F.); +#129630 = EDGE_LOOP('',(#129631,#129641,#129649,#129657)); +#129631 = ORIENTED_EDGE('',*,*,#129632,.T.); +#129632 = EDGE_CURVE('',#129633,#129635,#129637,.T.); +#129633 = VERTEX_POINT('',#129634); +#129634 = CARTESIAN_POINT('',(102.679372,-136.958569,1.585)); +#129635 = VERTEX_POINT('',#129636); +#129636 = CARTESIAN_POINT('',(102.679372,-133.073724,1.585)); +#129637 = LINE('',#129638,#129639); +#129638 = CARTESIAN_POINT('',(102.679372,-136.958569,1.585)); +#129639 = VECTOR('',#129640,1.); +#129640 = DIRECTION('',(0.,1.,0.)); +#129641 = ORIENTED_EDGE('',*,*,#129642,.T.); +#129642 = EDGE_CURVE('',#129635,#129643,#129645,.T.); +#129643 = VERTEX_POINT('',#129644); +#129644 = CARTESIAN_POINT('',(103.463815,-133.073724,1.585)); +#129645 = LINE('',#129646,#129647); +#129646 = CARTESIAN_POINT('',(102.679372,-133.073724,1.585)); +#129647 = VECTOR('',#129648,1.); +#129648 = DIRECTION('',(1.,0.,0.)); +#129649 = ORIENTED_EDGE('',*,*,#129650,.T.); +#129650 = EDGE_CURVE('',#129643,#129651,#129653,.T.); +#129651 = VERTEX_POINT('',#129652); +#129652 = CARTESIAN_POINT('',(103.463815,-136.958569,1.585)); +#129653 = LINE('',#129654,#129655); +#129654 = CARTESIAN_POINT('',(103.463815,-133.073724,1.585)); +#129655 = VECTOR('',#129656,1.); +#129656 = DIRECTION('',(0.,-1.,0.)); +#129657 = ORIENTED_EDGE('',*,*,#129658,.T.); +#129658 = EDGE_CURVE('',#129651,#129633,#129659,.T.); +#129659 = LINE('',#129660,#129661); +#129660 = CARTESIAN_POINT('',(103.463815,-136.958569,1.585)); +#129661 = VECTOR('',#129662,1.); +#129662 = DIRECTION('',(-1.,0.,0.)); +#129663 = PLANE('',#129664); +#129664 = AXIS2_PLACEMENT_3D('',#129665,#129666,#129667); +#129665 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129666 = DIRECTION('',(0.,0.,1.)); +#129667 = DIRECTION('',(1.,0.,-0.)); +#129668 = SHELL_BASED_SURFACE_MODEL('',(#129669)); +#129669 = OPEN_SHELL('',(#129670)); +#129670 = ADVANCED_FACE('',(#129671),#130002,.T.); +#129671 = FACE_BOUND('',#129672,.F.); +#129672 = EDGE_LOOP('',(#129673,#129683,#129691,#129699,#129707,#129715, + #129723,#129731,#129739,#129747,#129755,#129764,#129772,#129780, + #129788,#129796,#129804,#129812,#129820,#129828,#129836,#129844, + #129852,#129860,#129868,#129876,#129884,#129892,#129900,#129908, + #129916,#129924,#129932,#129940,#129948,#129956,#129964,#129972, + #129980,#129988,#129996)); +#129673 = ORIENTED_EDGE('',*,*,#129674,.T.); +#129674 = EDGE_CURVE('',#129675,#129677,#129679,.T.); +#129675 = VERTEX_POINT('',#129676); +#129676 = CARTESIAN_POINT('',(110.953352,-134.623926,1.585)); +#129677 = VERTEX_POINT('',#129678); +#129678 = CARTESIAN_POINT('',(111.102772,-134.58657,1.585)); +#129679 = LINE('',#129680,#129681); +#129680 = CARTESIAN_POINT('',(110.953352,-134.623926,1.585)); +#129681 = VECTOR('',#129682,1.); +#129682 = DIRECTION('',(0.970140972429,0.242541735819,0.)); +#129683 = ORIENTED_EDGE('',*,*,#129684,.T.); +#129684 = EDGE_CURVE('',#129677,#129685,#129687,.T.); +#129685 = VERTEX_POINT('',#129686); +#129686 = CARTESIAN_POINT('',(111.382926,-134.58657,1.585)); +#129687 = LINE('',#129688,#129689); +#129688 = CARTESIAN_POINT('',(111.102772,-134.58657,1.585)); +#129689 = VECTOR('',#129690,1.); +#129690 = DIRECTION('',(1.,0.,0.)); +#129691 = ORIENTED_EDGE('',*,*,#129692,.T.); +#129692 = EDGE_CURVE('',#129685,#129693,#129695,.T.); +#129693 = VERTEX_POINT('',#129694); +#129694 = CARTESIAN_POINT('',(111.737789,-134.679957,1.585)); +#129695 = LINE('',#129696,#129697); +#129696 = CARTESIAN_POINT('',(111.382926,-134.58657,1.585)); +#129697 = VECTOR('',#129698,1.); +#129698 = DIRECTION('',(0.967073195829,-0.254498396674,0.)); +#129699 = ORIENTED_EDGE('',*,*,#129700,.T.); +#129700 = EDGE_CURVE('',#129693,#129701,#129703,.T.); +#129701 = VERTEX_POINT('',#129702); +#129702 = CARTESIAN_POINT('',(111.961913,-134.810694,1.585)); +#129703 = LINE('',#129704,#129705); +#129704 = CARTESIAN_POINT('',(111.737789,-134.679957,1.585)); +#129705 = VECTOR('',#129706,1.); +#129706 = DIRECTION('',(0.863782255689,-0.503865274411,0.)); +#129707 = ORIENTED_EDGE('',*,*,#129708,.T.); +#129708 = EDGE_CURVE('',#129701,#129709,#129711,.T.); +#129709 = VERTEX_POINT('',#129710); +#129710 = CARTESIAN_POINT('',(112.073984,-134.922758,1.585)); +#129711 = LINE('',#129712,#129713); +#129712 = CARTESIAN_POINT('',(111.961913,-134.810694,1.585)); +#129713 = VECTOR('',#129714,1.); +#129714 = DIRECTION('',(0.707128864619,-0.707084697064,0.)); +#129715 = ORIENTED_EDGE('',*,*,#129716,.T.); +#129716 = EDGE_CURVE('',#129709,#129717,#129719,.T.); +#129717 = VERTEX_POINT('',#129718); +#129718 = CARTESIAN_POINT('',(112.204726,-135.165561,1.585)); +#129719 = LINE('',#129720,#129721); +#129720 = CARTESIAN_POINT('',(112.073984,-134.922758,1.585)); +#129721 = VECTOR('',#129722,1.); +#129722 = DIRECTION('',(0.474105229156,-0.880468188912,0.)); +#129723 = ORIENTED_EDGE('',*,*,#129724,.T.); +#129724 = EDGE_CURVE('',#129717,#129725,#129727,.T.); +#129725 = VERTEX_POINT('',#129726); +#129726 = CARTESIAN_POINT('',(112.242075,-135.352337,1.585)); +#129727 = LINE('',#129728,#129729); +#129728 = CARTESIAN_POINT('',(112.204726,-135.165561,1.585)); +#129729 = VECTOR('',#129730,1.); +#129730 = DIRECTION('',(0.196084836549,-0.980586934889,0.)); +#129731 = ORIENTED_EDGE('',*,*,#129732,.T.); +#129732 = EDGE_CURVE('',#129725,#129733,#129735,.T.); +#129733 = VERTEX_POINT('',#129734); +#129734 = CARTESIAN_POINT('',(112.242075,-136.958569,1.585)); +#129735 = LINE('',#129736,#129737); +#129736 = CARTESIAN_POINT('',(112.242075,-135.352337,1.585)); +#129737 = VECTOR('',#129738,1.); +#129738 = DIRECTION('',(0.,-1.,0.)); +#129739 = ORIENTED_EDGE('',*,*,#129740,.T.); +#129740 = EDGE_CURVE('',#129733,#129741,#129743,.T.); +#129741 = VERTEX_POINT('',#129742); +#129742 = CARTESIAN_POINT('',(111.457629,-136.958569,1.585)); +#129743 = LINE('',#129744,#129745); +#129744 = CARTESIAN_POINT('',(112.242075,-136.958569,1.585)); +#129745 = VECTOR('',#129746,1.); +#129746 = DIRECTION('',(-1.,0.,0.)); +#129747 = ORIENTED_EDGE('',*,*,#129748,.T.); +#129748 = EDGE_CURVE('',#129741,#129749,#129751,.T.); +#129749 = VERTEX_POINT('',#129750); +#129750 = CARTESIAN_POINT('',(111.457629,-135.576461,1.585)); +#129751 = LINE('',#129752,#129753); +#129752 = CARTESIAN_POINT('',(111.457629,-136.958569,1.585)); +#129753 = VECTOR('',#129754,1.); +#129754 = DIRECTION('',(0.,1.,0.)); +#129755 = ORIENTED_EDGE('',*,*,#129756,.T.); +#129756 = EDGE_CURVE('',#129749,#129757,#129759,.T.); +#129757 = VERTEX_POINT('',#129758); +#129758 = CARTESIAN_POINT('',(111.140129,-135.202919,1.585)); +#129759 = CIRCLE('',#129760,0.481096004265); +#129760 = AXIS2_PLACEMENT_3D('',#129761,#129762,#129763); +#129761 = CARTESIAN_POINT('',(110.98345706625,-135.6577896085,1.585)); +#129762 = DIRECTION('',(0.,0.,1.)); +#129763 = DIRECTION('',(0.985607715604,0.169048605265,-0.)); +#129764 = ORIENTED_EDGE('',*,*,#129765,.T.); +#129765 = EDGE_CURVE('',#129757,#129766,#129768,.T.); +#129766 = VERTEX_POINT('',#129767); +#129767 = CARTESIAN_POINT('',(111.046732,-135.202919,1.585)); +#129768 = LINE('',#129769,#129770); +#129769 = CARTESIAN_POINT('',(111.140129,-135.202919,1.585)); +#129770 = VECTOR('',#129771,1.); +#129771 = DIRECTION('',(-1.,0.,0.)); +#129772 = ORIENTED_EDGE('',*,*,#129773,.T.); +#129773 = EDGE_CURVE('',#129766,#129774,#129776,.T.); +#129774 = VERTEX_POINT('',#129775); +#129775 = CARTESIAN_POINT('',(111.028064,-135.184242,1.585)); +#129776 = LINE('',#129777,#129778); +#129777 = CARTESIAN_POINT('',(111.046732,-135.202919,1.585)); +#129778 = VECTOR('',#129779,1.); +#129779 = DIRECTION('',(-0.706936350669,0.707277170636,0.)); +#129780 = ORIENTED_EDGE('',*,*,#129781,.T.); +#129781 = EDGE_CURVE('',#129774,#129782,#129784,.T.); +#129782 = VERTEX_POINT('',#129783); +#129783 = CARTESIAN_POINT('',(110.841287,-135.221594,1.585)); +#129784 = LINE('',#129785,#129786); +#129785 = CARTESIAN_POINT('',(111.028064,-135.184242,1.585)); +#129786 = VECTOR('',#129787,1.); +#129787 = DIRECTION('',(-0.98058410825,-0.196098971562,0.)); +#129788 = ORIENTED_EDGE('',*,*,#129789,.T.); +#129789 = EDGE_CURVE('',#129782,#129790,#129792,.T.); +#129790 = VERTEX_POINT('',#129791); +#129791 = CARTESIAN_POINT('',(110.729229,-135.296307,1.585)); +#129792 = LINE('',#129793,#129794); +#129793 = CARTESIAN_POINT('',(110.841287,-135.221594,1.585)); +#129794 = VECTOR('',#129795,1.); +#129795 = DIRECTION('',(-0.832024020537,-0.554739604904,0.)); +#129796 = ORIENTED_EDGE('',*,*,#129797,.T.); +#129797 = EDGE_CURVE('',#129790,#129798,#129800,.T.); +#129798 = VERTEX_POINT('',#129799); +#129799 = CARTESIAN_POINT('',(110.579811,-135.464395,1.585)); +#129800 = LINE('',#129801,#129802); +#129801 = CARTESIAN_POINT('',(110.729229,-135.296307,1.585)); +#129802 = VECTOR('',#129803,1.); +#129803 = DIRECTION('',(-0.664379845902,-0.747395089868,0.)); +#129804 = ORIENTED_EDGE('',*,*,#129805,.T.); +#129805 = EDGE_CURVE('',#129798,#129806,#129808,.T.); +#129806 = VERTEX_POINT('',#129807); +#129807 = CARTESIAN_POINT('',(110.542454,-135.576461,1.585)); +#129808 = LINE('',#129809,#129810); +#129809 = CARTESIAN_POINT('',(110.579811,-135.464395,1.585)); +#129810 = VECTOR('',#129811,1.); +#129811 = DIRECTION('',(-0.316240464029,-0.948679065285,0.)); +#129812 = ORIENTED_EDGE('',*,*,#129813,.T.); +#129813 = EDGE_CURVE('',#129806,#129814,#129816,.T.); +#129814 = VERTEX_POINT('',#129815); +#129815 = CARTESIAN_POINT('',(110.542454,-136.958569,1.585)); +#129816 = LINE('',#129817,#129818); +#129817 = CARTESIAN_POINT('',(110.542454,-135.576461,1.585)); +#129818 = VECTOR('',#129819,1.); +#129819 = DIRECTION('',(0.,-1.,0.)); +#129820 = ORIENTED_EDGE('',*,*,#129821,.T.); +#129821 = EDGE_CURVE('',#129814,#129822,#129824,.T.); +#129822 = VERTEX_POINT('',#129823); +#129823 = CARTESIAN_POINT('',(109.758015,-136.958569,1.585)); +#129824 = LINE('',#129825,#129826); +#129825 = CARTESIAN_POINT('',(110.542454,-136.958569,1.585)); +#129826 = VECTOR('',#129827,1.); +#129827 = DIRECTION('',(-1.,0.,0.)); +#129828 = ORIENTED_EDGE('',*,*,#129829,.T.); +#129829 = EDGE_CURVE('',#129822,#129830,#129832,.T.); +#129830 = VERTEX_POINT('',#129831); +#129831 = CARTESIAN_POINT('',(109.739336,-136.939891,1.585)); +#129832 = LINE('',#129833,#129834); +#129833 = CARTESIAN_POINT('',(109.758015,-136.958569,1.585)); +#129834 = VECTOR('',#129835,1.); +#129835 = DIRECTION('',(-0.707125709294,0.707087852573,0.)); +#129836 = ORIENTED_EDGE('',*,*,#129837,.T.); +#129837 = EDGE_CURVE('',#129830,#129838,#129840,.T.); +#129838 = VERTEX_POINT('',#129839); +#129839 = CARTESIAN_POINT('',(109.739336,-135.744559,1.585)); +#129840 = LINE('',#129841,#129842); +#129841 = CARTESIAN_POINT('',(109.739336,-136.939891,1.585)); +#129842 = VECTOR('',#129843,1.); +#129843 = DIRECTION('',(0.,1.,0.)); +#129844 = ORIENTED_EDGE('',*,*,#129845,.T.); +#129845 = EDGE_CURVE('',#129838,#129846,#129848,.T.); +#129846 = VERTEX_POINT('',#129847); +#129847 = CARTESIAN_POINT('',(109.758015,-135.651172,1.585)); +#129848 = LINE('',#129849,#129850); +#129849 = CARTESIAN_POINT('',(109.739336,-135.744559,1.585)); +#129850 = VECTOR('',#129851,1.); +#129851 = DIRECTION('',(0.196132289187,0.980577444743,0.)); +#129852 = ORIENTED_EDGE('',*,*,#129853,.T.); +#129853 = EDGE_CURVE('',#129846,#129854,#129856,.T.); +#129854 = VERTEX_POINT('',#129855); +#129855 = CARTESIAN_POINT('',(109.739336,-135.557784,1.585)); +#129856 = LINE('',#129857,#129858); +#129857 = CARTESIAN_POINT('',(109.758015,-135.651172,1.585)); +#129858 = VECTOR('',#129859,1.); +#129859 = DIRECTION('',(-0.196130269789,0.980577848655,0.)); +#129860 = ORIENTED_EDGE('',*,*,#129861,.T.); +#129861 = EDGE_CURVE('',#129854,#129862,#129864,.T.); +#129862 = VERTEX_POINT('',#129863); +#129863 = CARTESIAN_POINT('',(109.758015,-135.483078,1.585)); +#129864 = LINE('',#129865,#129866); +#129865 = CARTESIAN_POINT('',(109.739336,-135.557784,1.585)); +#129866 = VECTOR('',#129867,1.); +#129867 = DIRECTION('',(0.242566180297,0.970134860819,0.)); +#129868 = ORIENTED_EDGE('',*,*,#129869,.T.); +#129869 = EDGE_CURVE('',#129862,#129870,#129872,.T.); +#129870 = VERTEX_POINT('',#129871); +#129871 = CARTESIAN_POINT('',(109.739336,-135.427047,1.585)); +#129872 = LINE('',#129873,#129874); +#129873 = CARTESIAN_POINT('',(109.758015,-135.483078,1.585)); +#129874 = VECTOR('',#129875,1.); +#129875 = DIRECTION('',(-0.316258242048,0.94867313883,0.)); +#129876 = ORIENTED_EDGE('',*,*,#129877,.T.); +#129877 = EDGE_CURVE('',#129870,#129878,#129880,.T.); +#129878 = VERTEX_POINT('',#129879); +#129879 = CARTESIAN_POINT('',(109.758015,-135.408364,1.585)); +#129880 = LINE('',#129881,#129882); +#129881 = CARTESIAN_POINT('',(109.739336,-135.427047,1.585)); +#129882 = VECTOR('',#129883,1.); +#129883 = DIRECTION('',(0.707031073824,0.707182480445,0.)); +#129884 = ORIENTED_EDGE('',*,*,#129885,.T.); +#129885 = EDGE_CURVE('',#129878,#129886,#129888,.T.); +#129886 = VERTEX_POINT('',#129887); +#129887 = CARTESIAN_POINT('',(109.758015,-135.296307,1.585)); +#129888 = LINE('',#129889,#129890); +#129889 = CARTESIAN_POINT('',(109.758015,-135.408364,1.585)); +#129890 = VECTOR('',#129891,1.); +#129891 = DIRECTION('',(0.,1.,0.)); +#129892 = ORIENTED_EDGE('',*,*,#129893,.T.); +#129893 = EDGE_CURVE('',#129886,#129894,#129896,.T.); +#129894 = VERTEX_POINT('',#129895); +#129895 = CARTESIAN_POINT('',(109.739336,-135.277626,1.585)); +#129896 = LINE('',#129897,#129898); +#129897 = CARTESIAN_POINT('',(109.758015,-135.296307,1.585)); +#129898 = VECTOR('',#129899,1.); +#129899 = DIRECTION('',(-0.707068926491,0.707144633856,0.)); +#129900 = ORIENTED_EDGE('',*,*,#129901,.T.); +#129901 = EDGE_CURVE('',#129894,#129902,#129904,.T.); +#129902 = VERTEX_POINT('',#129903); +#129903 = CARTESIAN_POINT('',(109.739336,-135.146882,1.585)); +#129904 = LINE('',#129905,#129906); +#129905 = CARTESIAN_POINT('',(109.739336,-135.277626,1.585)); +#129906 = VECTOR('',#129907,1.); +#129907 = DIRECTION('',(0.,1.,0.)); +#129908 = ORIENTED_EDGE('',*,*,#129909,.T.); +#129909 = EDGE_CURVE('',#129902,#129910,#129912,.T.); +#129910 = VERTEX_POINT('',#129911); +#129911 = CARTESIAN_POINT('',(109.758015,-135.12821,1.585)); +#129912 = LINE('',#129913,#129914); +#129913 = CARTESIAN_POINT('',(109.739336,-135.146882,1.585)); +#129914 = VECTOR('',#129915,1.); +#129915 = DIRECTION('',(0.707239288578,0.70697424896,0.)); +#129916 = ORIENTED_EDGE('',*,*,#129917,.T.); +#129917 = EDGE_CURVE('',#129910,#129918,#129920,.T.); +#129918 = VERTEX_POINT('',#129919); +#129919 = CARTESIAN_POINT('',(109.739336,-134.960124,1.585)); +#129920 = LINE('',#129921,#129922); +#129921 = CARTESIAN_POINT('',(109.758015,-135.12821,1.585)); +#129922 = VECTOR('',#129923,1.); +#129923 = DIRECTION('',(-0.110447750582,0.993881931816,0.)); +#129924 = ORIENTED_EDGE('',*,*,#129925,.T.); +#129925 = EDGE_CURVE('',#129918,#129926,#129928,.T.); +#129926 = VERTEX_POINT('',#129927); +#129927 = CARTESIAN_POINT('',(109.758015,-134.866728,1.585)); +#129928 = LINE('',#129929,#129930); +#129929 = CARTESIAN_POINT('',(109.739336,-134.960124,1.585)); +#129930 = VECTOR('',#129931,1.); +#129931 = DIRECTION('',(0.196114116065,0.980581079503,0.)); +#129932 = ORIENTED_EDGE('',*,*,#129933,.T.); +#129933 = EDGE_CURVE('',#129926,#129934,#129936,.T.); +#129934 = VERTEX_POINT('',#129935); +#129935 = CARTESIAN_POINT('',(109.739336,-134.848052,1.585)); +#129936 = LINE('',#129937,#129938); +#129937 = CARTESIAN_POINT('',(109.758015,-134.866728,1.585)); +#129938 = VECTOR('',#129939,1.); +#129939 = DIRECTION('',(-0.707163567029,0.707049990783,0.)); +#129940 = ORIENTED_EDGE('',*,*,#129941,.T.); +#129941 = EDGE_CURVE('',#129934,#129942,#129944,.T.); +#129942 = VERTEX_POINT('',#129943); +#129943 = CARTESIAN_POINT('',(109.739336,-134.69863,1.585)); +#129944 = LINE('',#129945,#129946); +#129945 = CARTESIAN_POINT('',(109.739336,-134.848052,1.585)); +#129946 = VECTOR('',#129947,1.); +#129947 = DIRECTION('',(0.,1.,0.)); +#129948 = ORIENTED_EDGE('',*,*,#129949,.T.); +#129949 = EDGE_CURVE('',#129942,#129950,#129952,.T.); +#129950 = VERTEX_POINT('',#129951); +#129951 = CARTESIAN_POINT('',(109.758015,-134.642604,1.585)); +#129952 = LINE('',#129953,#129954); +#129953 = CARTESIAN_POINT('',(109.739336,-134.69863,1.585)); +#129954 = VECTOR('',#129955,1.); +#129955 = DIRECTION('',(0.316283642979,0.948664670568,0.)); +#129956 = ORIENTED_EDGE('',*,*,#129957,.T.); +#129957 = EDGE_CURVE('',#129950,#129958,#129960,.T.); +#129958 = VERTEX_POINT('',#129959); +#129959 = CARTESIAN_POINT('',(110.505098,-134.642604,1.585)); +#129960 = LINE('',#129961,#129962); +#129961 = CARTESIAN_POINT('',(109.758015,-134.642604,1.585)); +#129962 = VECTOR('',#129963,1.); +#129963 = DIRECTION('',(1.,0.,0.)); +#129964 = ORIENTED_EDGE('',*,*,#129965,.T.); +#129965 = EDGE_CURVE('',#129958,#129966,#129968,.T.); +#129966 = VERTEX_POINT('',#129967); +#129967 = CARTESIAN_POINT('',(110.542454,-134.679957,1.585)); +#129968 = LINE('',#129969,#129970); +#129969 = CARTESIAN_POINT('',(110.505098,-134.642604,1.585)); +#129970 = VECTOR('',#129971,1.); +#129971 = DIRECTION('',(0.707135175058,-0.707078386175,0.)); +#129972 = ORIENTED_EDGE('',*,*,#129973,.T.); +#129973 = EDGE_CURVE('',#129966,#129974,#129976,.T.); +#129974 = VERTEX_POINT('',#129975); +#129975 = CARTESIAN_POINT('',(110.542454,-134.885406,1.585)); +#129976 = LINE('',#129977,#129978); +#129977 = CARTESIAN_POINT('',(110.542454,-134.679957,1.585)); +#129978 = VECTOR('',#129979,1.); +#129979 = DIRECTION('',(0.,-1.,0.)); +#129980 = ORIENTED_EDGE('',*,*,#129981,.T.); +#129981 = EDGE_CURVE('',#129974,#129982,#129984,.T.); +#129982 = VERTEX_POINT('',#129983); +#129983 = CARTESIAN_POINT('',(110.561127,-134.904083,1.585)); +#129984 = LINE('',#129985,#129986); +#129985 = CARTESIAN_POINT('',(110.542454,-134.885406,1.585)); +#129986 = VECTOR('',#129987,1.); +#129987 = DIRECTION('',(0.707031049497,-0.707182504766,0.)); +#129988 = ORIENTED_EDGE('',*,*,#129989,.T.); +#129989 = EDGE_CURVE('',#129982,#129990,#129992,.T.); +#129990 = VERTEX_POINT('',#129991); +#129991 = CARTESIAN_POINT('',(110.766581,-134.717314,1.585)); +#129992 = LINE('',#129993,#129994); +#129993 = CARTESIAN_POINT('',(110.561127,-134.904083,1.585)); +#129994 = VECTOR('',#129995,1.); +#129995 = DIRECTION('',(0.739953273512,0.672658273582,0.)); +#129996 = ORIENTED_EDGE('',*,*,#129997,.T.); +#129997 = EDGE_CURVE('',#129990,#129675,#129998,.T.); +#129998 = LINE('',#129999,#130000); +#129999 = CARTESIAN_POINT('',(110.766581,-134.717314,1.585)); +#130000 = VECTOR('',#130001,1.); +#130001 = DIRECTION('',(0.894422402077,0.447223173218,0.)); +#130002 = PLANE('',#130003); +#130003 = AXIS2_PLACEMENT_3D('',#130004,#130005,#130006); +#130004 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130005 = DIRECTION('',(0.,0.,1.)); +#130006 = DIRECTION('',(1.,0.,-0.)); +#130007 = SHELL_BASED_SURFACE_MODEL('',(#130008)); +#130008 = OPEN_SHELL('',(#130009)); +#130009 = ADVANCED_FACE('',(#130010),#130054,.T.); +#130010 = FACE_BOUND('',#130011,.F.); +#130011 = EDGE_LOOP('',(#130012,#130023,#130031,#130040,#130048)); +#130012 = ORIENTED_EDGE('',*,*,#130013,.T.); +#130013 = EDGE_CURVE('',#130014,#130016,#130018,.T.); +#130014 = VERTEX_POINT('',#130015); +#130015 = CARTESIAN_POINT('',(198.886217,-134.800139,1.585)); +#130016 = VERTEX_POINT('',#130017); +#130017 = CARTESIAN_POINT('',(199.00165,-134.8231,1.585)); +#130018 = CIRCLE('',#130019,6.000007318649E-02); +#130019 = AXIS2_PLACEMENT_3D('',#130020,#130021,#130022); +#130020 = CARTESIAN_POINT('',(198.94164992681,-134.8230998233,1.585)); +#130021 = DIRECTION('',(0.,0.,-1.)); +#130022 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#130023 = ORIENTED_EDGE('',*,*,#130024,.T.); +#130024 = EDGE_CURVE('',#130016,#130025,#130027,.T.); +#130025 = VERTEX_POINT('',#130026); +#130026 = CARTESIAN_POINT('',(199.00165,-136.3231,1.585)); +#130027 = LINE('',#130028,#130029); +#130028 = CARTESIAN_POINT('',(199.00165,-134.8231,1.585)); +#130029 = VECTOR('',#130030,1.); +#130030 = DIRECTION('',(0.,-1.,0.)); +#130031 = ORIENTED_EDGE('',*,*,#130032,.T.); +#130032 = EDGE_CURVE('',#130025,#130033,#130035,.T.); +#130033 = VERTEX_POINT('',#130034); +#130034 = CARTESIAN_POINT('',(198.88165,-136.3231,1.585)); +#130035 = CIRCLE('',#130036,6.000000000042E-02); +#130036 = AXIS2_PLACEMENT_3D('',#130037,#130038,#130039); +#130037 = CARTESIAN_POINT('',(198.94165,-136.3231002255,1.585)); +#130038 = DIRECTION('',(0.,0.,-1.)); +#130039 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#130040 = ORIENTED_EDGE('',*,*,#130041,.T.); +#130041 = EDGE_CURVE('',#130033,#130042,#130044,.T.); +#130042 = VERTEX_POINT('',#130043); +#130043 = CARTESIAN_POINT('',(198.88165,-134.8231,1.585)); +#130044 = LINE('',#130045,#130046); +#130045 = CARTESIAN_POINT('',(198.88165,-136.3231,1.585)); +#130046 = VECTOR('',#130047,1.); +#130047 = DIRECTION('',(0.,1.,0.)); +#130048 = ORIENTED_EDGE('',*,*,#130049,.T.); +#130049 = EDGE_CURVE('',#130042,#130014,#130050,.T.); +#130050 = LINE('',#130051,#130052); +#130051 = CARTESIAN_POINT('',(198.88165,-134.8231,1.585)); +#130052 = VECTOR('',#130053,1.); +#130053 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#130054 = PLANE('',#130055); +#130055 = AXIS2_PLACEMENT_3D('',#130056,#130057,#130058); +#130056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130057 = DIRECTION('',(0.,0.,1.)); +#130058 = DIRECTION('',(1.,0.,-0.)); +#130059 = SHELL_BASED_SURFACE_MODEL('',(#130060)); +#130060 = OPEN_SHELL('',(#130061)); +#130061 = ADVANCED_FACE('',(#130062),#130106,.T.); +#130062 = FACE_BOUND('',#130063,.F.); +#130063 = EDGE_LOOP('',(#130064,#130075,#130083,#130092,#130100)); +#130064 = ORIENTED_EDGE('',*,*,#130065,.T.); +#130065 = EDGE_CURVE('',#130066,#130068,#130070,.T.); +#130066 = VERTEX_POINT('',#130067); +#130067 = CARTESIAN_POINT('',(205.886217,-134.800139,1.585)); +#130068 = VERTEX_POINT('',#130069); +#130069 = CARTESIAN_POINT('',(206.00165,-134.8231,1.585)); +#130070 = CIRCLE('',#130071,6.000007318649E-02); +#130071 = AXIS2_PLACEMENT_3D('',#130072,#130073,#130074); +#130072 = CARTESIAN_POINT('',(205.94164992681,-134.8230998233,1.585)); +#130073 = DIRECTION('',(0.,0.,-1.)); +#130074 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#130075 = ORIENTED_EDGE('',*,*,#130076,.T.); +#130076 = EDGE_CURVE('',#130068,#130077,#130079,.T.); +#130077 = VERTEX_POINT('',#130078); +#130078 = CARTESIAN_POINT('',(206.00165,-136.3231,1.585)); +#130079 = LINE('',#130080,#130081); +#130080 = CARTESIAN_POINT('',(206.00165,-134.8231,1.585)); +#130081 = VECTOR('',#130082,1.); +#130082 = DIRECTION('',(0.,-1.,0.)); +#130083 = ORIENTED_EDGE('',*,*,#130084,.T.); +#130084 = EDGE_CURVE('',#130077,#130085,#130087,.T.); +#130085 = VERTEX_POINT('',#130086); +#130086 = CARTESIAN_POINT('',(205.88165,-136.3231,1.585)); +#130087 = CIRCLE('',#130088,6.000000000042E-02); +#130088 = AXIS2_PLACEMENT_3D('',#130089,#130090,#130091); +#130089 = CARTESIAN_POINT('',(205.94165,-136.3231002255,1.585)); +#130090 = DIRECTION('',(0.,0.,-1.)); +#130091 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#130092 = ORIENTED_EDGE('',*,*,#130093,.T.); +#130093 = EDGE_CURVE('',#130085,#130094,#130096,.T.); +#130094 = VERTEX_POINT('',#130095); +#130095 = CARTESIAN_POINT('',(205.88165,-134.8231,1.585)); +#130096 = LINE('',#130097,#130098); +#130097 = CARTESIAN_POINT('',(205.88165,-136.3231,1.585)); +#130098 = VECTOR('',#130099,1.); +#130099 = DIRECTION('',(0.,1.,0.)); +#130100 = ORIENTED_EDGE('',*,*,#130101,.T.); +#130101 = EDGE_CURVE('',#130094,#130066,#130102,.T.); +#130102 = LINE('',#130103,#130104); +#130103 = CARTESIAN_POINT('',(205.88165,-134.8231,1.585)); +#130104 = VECTOR('',#130105,1.); +#130105 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#130106 = PLANE('',#130107); +#130107 = AXIS2_PLACEMENT_3D('',#130108,#130109,#130110); +#130108 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130109 = DIRECTION('',(0.,0.,1.)); +#130110 = DIRECTION('',(1.,0.,-0.)); +#130111 = SHELL_BASED_SURFACE_MODEL('',(#130112)); +#130112 = OPEN_SHELL('',(#130113)); +#130113 = ADVANCED_FACE('',(#130114),#130200,.T.); +#130114 = FACE_BOUND('',#130115,.F.); +#130115 = EDGE_LOOP('',(#130116,#130127,#130135,#130144,#130152,#130161, + #130169,#130177,#130185,#130194)); +#130116 = ORIENTED_EDGE('',*,*,#130117,.T.); +#130117 = EDGE_CURVE('',#130118,#130120,#130122,.T.); +#130118 = VERTEX_POINT('',#130119); +#130119 = CARTESIAN_POINT('',(144.915,-133.6,1.585)); +#130120 = VERTEX_POINT('',#130121); +#130121 = CARTESIAN_POINT('',(144.975,-133.54,1.585)); +#130122 = CIRCLE('',#130123,5.999932016268E-02); +#130123 = AXIS2_PLACEMENT_3D('',#130124,#130125,#130126); +#130124 = CARTESIAN_POINT('',(144.97499932015,-133.5999993201,1.585)); +#130125 = DIRECTION('',(0.,0.,-1.)); +#130126 = DIRECTION('',(-0.999999999936,-1.133081470031E-05,-0.)); +#130127 = ORIENTED_EDGE('',*,*,#130128,.T.); +#130128 = EDGE_CURVE('',#130120,#130129,#130131,.T.); +#130129 = VERTEX_POINT('',#130130); +#130130 = CARTESIAN_POINT('',(151.375,-133.54,1.585)); +#130131 = LINE('',#130132,#130133); +#130132 = CARTESIAN_POINT('',(144.975,-133.54,1.585)); +#130133 = VECTOR('',#130134,1.); +#130134 = DIRECTION('',(1.,0.,0.)); +#130135 = ORIENTED_EDGE('',*,*,#130136,.T.); +#130136 = EDGE_CURVE('',#130129,#130137,#130139,.T.); +#130137 = VERTEX_POINT('',#130138); +#130138 = CARTESIAN_POINT('',(151.435,-133.6,1.585)); +#130139 = CIRCLE('',#130140,5.999932016262E-02); +#130140 = AXIS2_PLACEMENT_3D('',#130141,#130142,#130143); +#130141 = CARTESIAN_POINT('',(151.37500067984,-133.5999993201,1.585)); +#130142 = DIRECTION('',(0.,0.,-1.)); +#130143 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#130144 = ORIENTED_EDGE('',*,*,#130145,.T.); +#130145 = EDGE_CURVE('',#130137,#130146,#130148,.T.); +#130146 = VERTEX_POINT('',#130147); +#130147 = CARTESIAN_POINT('',(151.435,-134.8,1.585)); +#130148 = LINE('',#130149,#130150); +#130149 = CARTESIAN_POINT('',(151.435,-133.6,1.585)); +#130150 = VECTOR('',#130151,1.); +#130151 = DIRECTION('',(0.,-1.,0.)); +#130152 = ORIENTED_EDGE('',*,*,#130153,.T.); +#130153 = EDGE_CURVE('',#130146,#130154,#130156,.T.); +#130154 = VERTEX_POINT('',#130155); +#130155 = CARTESIAN_POINT('',(151.315,-134.8,1.585)); +#130156 = CIRCLE('',#130157,6.000000000042E-02); +#130157 = AXIS2_PLACEMENT_3D('',#130158,#130159,#130160); +#130158 = CARTESIAN_POINT('',(151.375,-134.8000002255,1.585)); +#130159 = DIRECTION('',(0.,0.,-1.)); +#130160 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#130161 = ORIENTED_EDGE('',*,*,#130162,.T.); +#130162 = EDGE_CURVE('',#130154,#130163,#130165,.T.); +#130163 = VERTEX_POINT('',#130164); +#130164 = CARTESIAN_POINT('',(151.315,-133.66,1.585)); +#130165 = LINE('',#130166,#130167); +#130166 = CARTESIAN_POINT('',(151.315,-134.8,1.585)); +#130167 = VECTOR('',#130168,1.); +#130168 = DIRECTION('',(0.,1.,0.)); +#130169 = ORIENTED_EDGE('',*,*,#130170,.T.); +#130170 = EDGE_CURVE('',#130163,#130171,#130173,.T.); +#130171 = VERTEX_POINT('',#130172); +#130172 = CARTESIAN_POINT('',(145.035,-133.66,1.585)); +#130173 = LINE('',#130174,#130175); +#130174 = CARTESIAN_POINT('',(151.315,-133.66,1.585)); +#130175 = VECTOR('',#130176,1.); +#130176 = DIRECTION('',(-1.,0.,0.)); +#130177 = ORIENTED_EDGE('',*,*,#130178,.T.); +#130178 = EDGE_CURVE('',#130171,#130179,#130181,.T.); +#130179 = VERTEX_POINT('',#130180); +#130180 = CARTESIAN_POINT('',(145.035,-134.8,1.585)); +#130181 = LINE('',#130182,#130183); +#130182 = CARTESIAN_POINT('',(145.035,-133.66,1.585)); +#130183 = VECTOR('',#130184,1.); +#130184 = DIRECTION('',(0.,-1.,0.)); +#130185 = ORIENTED_EDGE('',*,*,#130186,.T.); +#130186 = EDGE_CURVE('',#130179,#130187,#130189,.T.); +#130187 = VERTEX_POINT('',#130188); +#130188 = CARTESIAN_POINT('',(144.915,-134.8,1.585)); +#130189 = CIRCLE('',#130190,6.000000000042E-02); +#130190 = AXIS2_PLACEMENT_3D('',#130191,#130192,#130193); +#130191 = CARTESIAN_POINT('',(144.975,-134.8000002255,1.585)); +#130192 = DIRECTION('',(0.,0.,-1.)); +#130193 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#130194 = ORIENTED_EDGE('',*,*,#130195,.T.); +#130195 = EDGE_CURVE('',#130187,#130118,#130196,.T.); +#130196 = LINE('',#130197,#130198); +#130197 = CARTESIAN_POINT('',(144.915,-134.8,1.585)); +#130198 = VECTOR('',#130199,1.); +#130199 = DIRECTION('',(0.,1.,0.)); +#130200 = PLANE('',#130201); +#130201 = AXIS2_PLACEMENT_3D('',#130202,#130203,#130204); +#130202 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130203 = DIRECTION('',(0.,0.,1.)); +#130204 = DIRECTION('',(1.,0.,-0.)); +#130205 = SHELL_BASED_SURFACE_MODEL('',(#130206)); +#130206 = OPEN_SHELL('',(#130207)); +#130207 = ADVANCED_FACE('',(#130208),#130480,.T.); +#130208 = FACE_BOUND('',#130209,.F.); +#130209 = EDGE_LOOP('',(#130210,#130221,#130229,#130237,#130246,#130254, + #130262,#130270,#130278,#130286,#130294,#130302,#130311,#130319, + #130327,#130335,#130343,#130351,#130360,#130368,#130376,#130385, + #130393,#130401,#130409,#130417,#130425,#130433,#130441,#130450, + #130458,#130466,#130474)); +#130210 = ORIENTED_EDGE('',*,*,#130211,.T.); +#130211 = EDGE_CURVE('',#130212,#130214,#130216,.T.); +#130212 = VERTEX_POINT('',#130213); +#130213 = CARTESIAN_POINT('',(124.90079,-133.450873,1.585)); +#130214 = VERTEX_POINT('',#130215); +#130215 = CARTESIAN_POINT('',(125.024119,-133.491982,1.585)); +#130216 = CIRCLE('',#130217,6.499998485138E-02); +#130217 = AXIS2_PLACEMENT_3D('',#130218,#130219,#130220); +#130218 = CARTESIAN_POINT('',(124.96245436584,-133.4714279024,1.585)); +#130219 = DIRECTION('',(0.,0.,-1.)); +#130220 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#130221 = ORIENTED_EDGE('',*,*,#130222,.T.); +#130222 = EDGE_CURVE('',#130214,#130223,#130225,.T.); +#130223 = VERTEX_POINT('',#130224); +#130224 = CARTESIAN_POINT('',(124.984597,-133.610547,1.585)); +#130225 = LINE('',#130226,#130227); +#130226 = CARTESIAN_POINT('',(125.024119,-133.491982,1.585)); +#130227 = VECTOR('',#130228,1.); +#130228 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#130229 = ORIENTED_EDGE('',*,*,#130230,.T.); +#130230 = EDGE_CURVE('',#130223,#130231,#130233,.T.); +#130231 = VERTEX_POINT('',#130232); +#130232 = CARTESIAN_POINT('',(124.984597,-133.79894,1.585)); +#130233 = LINE('',#130234,#130235); +#130234 = CARTESIAN_POINT('',(124.984597,-133.610547,1.585)); +#130235 = VECTOR('',#130236,1.); +#130236 = DIRECTION('',(0.,-1.,0.)); +#130237 = ORIENTED_EDGE('',*,*,#130238,.T.); +#130238 = EDGE_CURVE('',#130231,#130239,#130241,.T.); +#130239 = VERTEX_POINT('',#130240); +#130240 = CARTESIAN_POINT('',(125.10637,-133.920714,1.585)); +#130241 = CIRCLE('',#130242,0.170995888391); +#130242 = AXIS2_PLACEMENT_3D('',#130243,#130244,#130245); +#130243 = CARTESIAN_POINT('',(125.1499473225,-133.7553640353,1.585)); +#130244 = DIRECTION('',(0.,0.,1.)); +#130245 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#130246 = ORIENTED_EDGE('',*,*,#130247,.T.); +#130247 = EDGE_CURVE('',#130239,#130248,#130250,.T.); +#130248 = VERTEX_POINT('',#130249); +#130249 = CARTESIAN_POINT('',(125.161395,-133.920714,1.585)); +#130250 = LINE('',#130251,#130252); +#130251 = CARTESIAN_POINT('',(125.10637,-133.920714,1.585)); +#130252 = VECTOR('',#130253,1.); +#130253 = DIRECTION('',(1.,0.,0.)); +#130254 = ORIENTED_EDGE('',*,*,#130255,.T.); +#130255 = EDGE_CURVE('',#130248,#130256,#130258,.T.); +#130256 = VERTEX_POINT('',#130257); +#130257 = CARTESIAN_POINT('',(125.223951,-133.889436,1.585)); +#130258 = LINE('',#130259,#130260); +#130259 = CARTESIAN_POINT('',(125.161395,-133.920714,1.585)); +#130260 = VECTOR('',#130261,1.); +#130261 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#130262 = ORIENTED_EDGE('',*,*,#130263,.T.); +#130263 = EDGE_CURVE('',#130256,#130264,#130266,.T.); +#130264 = VERTEX_POINT('',#130265); +#130265 = CARTESIAN_POINT('',(125.251889,-133.861497,1.585)); +#130266 = LINE('',#130267,#130268); +#130267 = CARTESIAN_POINT('',(125.223951,-133.889436,1.585)); +#130268 = VECTOR('',#130269,1.); +#130269 = DIRECTION('',(0.707094126372,0.707119435775,0.)); +#130270 = ORIENTED_EDGE('',*,*,#130271,.T.); +#130271 = EDGE_CURVE('',#130264,#130272,#130274,.T.); +#130272 = VERTEX_POINT('',#130273); +#130273 = CARTESIAN_POINT('',(125.286839,-133.791596,1.585)); +#130274 = LINE('',#130275,#130276); +#130275 = CARTESIAN_POINT('',(125.251889,-133.861497,1.585)); +#130276 = VECTOR('',#130277,1.); +#130277 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#130278 = ORIENTED_EDGE('',*,*,#130279,.T.); +#130279 = EDGE_CURVE('',#130272,#130280,#130282,.T.); +#130280 = VERTEX_POINT('',#130281); +#130281 = CARTESIAN_POINT('',(125.332887,-133.613788,1.585)); +#130282 = LINE('',#130283,#130284); +#130283 = CARTESIAN_POINT('',(125.286839,-133.791596,1.585)); +#130284 = VECTOR('',#130285,1.); +#130285 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#130286 = ORIENTED_EDGE('',*,*,#130287,.T.); +#130287 = EDGE_CURVE('',#130280,#130288,#130290,.T.); +#130288 = VERTEX_POINT('',#130289); +#130289 = CARTESIAN_POINT('',(125.38792,-133.511181,1.585)); +#130290 = LINE('',#130291,#130292); +#130291 = CARTESIAN_POINT('',(125.332887,-133.613788,1.585)); +#130292 = VECTOR('',#130293,1.); +#130293 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#130294 = ORIENTED_EDGE('',*,*,#130295,.T.); +#130295 = EDGE_CURVE('',#130288,#130296,#130298,.T.); +#130296 = VERTEX_POINT('',#130297); +#130297 = CARTESIAN_POINT('',(125.447671,-133.456147,1.585)); +#130298 = LINE('',#130299,#130300); +#130299 = CARTESIAN_POINT('',(125.38792,-133.511181,1.585)); +#130300 = VECTOR('',#130301,1.); +#130301 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#130302 = ORIENTED_EDGE('',*,*,#130303,.T.); +#130303 = EDGE_CURVE('',#130296,#130304,#130306,.T.); +#130304 = VERTEX_POINT('',#130305); +#130305 = CARTESIAN_POINT('',(125.677237,-133.41329,1.585)); +#130306 = CIRCLE('',#130307,0.258971949836); +#130307 = AXIS2_PLACEMENT_3D('',#130308,#130309,#130310); +#130308 = CARTESIAN_POINT('',(125.60487456064,-133.6619466873,1.585)); +#130309 = DIRECTION('',(0.,0.,-1.)); +#130310 = DIRECTION('',(-0.607029296992,0.794679452732,0.)); +#130311 = ORIENTED_EDGE('',*,*,#130312,.T.); +#130312 = EDGE_CURVE('',#130304,#130313,#130315,.T.); +#130313 = VERTEX_POINT('',#130314); +#130314 = CARTESIAN_POINT('',(125.779844,-133.468323,1.585)); +#130315 = LINE('',#130316,#130317); +#130316 = CARTESIAN_POINT('',(125.677237,-133.41329,1.585)); +#130317 = VECTOR('',#130318,1.); +#130318 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#130319 = ORIENTED_EDGE('',*,*,#130320,.T.); +#130320 = EDGE_CURVE('',#130313,#130321,#130323,.T.); +#130321 = VERTEX_POINT('',#130322); +#130322 = CARTESIAN_POINT('',(125.834878,-133.528074,1.585)); +#130323 = LINE('',#130324,#130325); +#130324 = CARTESIAN_POINT('',(125.779844,-133.468323,1.585)); +#130325 = VECTOR('',#130326,1.); +#130326 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#130327 = ORIENTED_EDGE('',*,*,#130328,.T.); +#130328 = EDGE_CURVE('',#130321,#130329,#130331,.T.); +#130329 = VERTEX_POINT('',#130330); +#130330 = CARTESIAN_POINT('',(125.881681,-133.6282,1.585)); +#130331 = LINE('',#130332,#130333); +#130332 = CARTESIAN_POINT('',(125.834878,-133.528074,1.585)); +#130333 = VECTOR('',#130334,1.); +#130334 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#130335 = ORIENTED_EDGE('',*,*,#130336,.T.); +#130336 = EDGE_CURVE('',#130329,#130337,#130339,.T.); +#130337 = VERTEX_POINT('',#130338); +#130338 = CARTESIAN_POINT('',(125.882563,-133.867365,1.585)); +#130339 = LINE('',#130340,#130341); +#130340 = CARTESIAN_POINT('',(125.881681,-133.6282,1.585)); +#130341 = VECTOR('',#130342,1.); +#130342 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#130343 = ORIENTED_EDGE('',*,*,#130344,.T.); +#130344 = EDGE_CURVE('',#130337,#130345,#130347,.T.); +#130345 = VERTEX_POINT('',#130346); +#130346 = CARTESIAN_POINT('',(125.838404,-134.006269,1.585)); +#130347 = LINE('',#130348,#130349); +#130348 = CARTESIAN_POINT('',(125.882563,-133.867365,1.585)); +#130349 = VECTOR('',#130350,1.); +#130350 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#130351 = ORIENTED_EDGE('',*,*,#130352,.T.); +#130352 = EDGE_CURVE('',#130345,#130353,#130355,.T.); +#130353 = VERTEX_POINT('',#130354); +#130354 = CARTESIAN_POINT('',(125.715076,-133.965159,1.585)); +#130355 = CIRCLE('',#130356,6.499966862258E-02); +#130356 = AXIS2_PLACEMENT_3D('',#130357,#130358,#130359); +#130357 = CARTESIAN_POINT('',(125.77674006734,-133.9857137979,1.585)); +#130358 = DIRECTION('',(-0.,0.,-1.)); +#130359 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#130360 = ORIENTED_EDGE('',*,*,#130361,.T.); +#130361 = EDGE_CURVE('',#130353,#130362,#130364,.T.); +#130362 = VERTEX_POINT('',#130363); +#130363 = CARTESIAN_POINT('',(125.754597,-133.846596,1.585)); +#130364 = LINE('',#130365,#130366); +#130365 = CARTESIAN_POINT('',(125.715076,-133.965159,1.585)); +#130366 = VECTOR('',#130367,1.); +#130367 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#130368 = ORIENTED_EDGE('',*,*,#130369,.T.); +#130369 = EDGE_CURVE('',#130362,#130370,#130372,.T.); +#130370 = VERTEX_POINT('',#130371); +#130371 = CARTESIAN_POINT('',(125.754597,-133.658202,1.585)); +#130372 = LINE('',#130373,#130374); +#130373 = CARTESIAN_POINT('',(125.754597,-133.846596,1.585)); +#130374 = VECTOR('',#130375,1.); +#130375 = DIRECTION('',(0.,1.,0.)); +#130376 = ORIENTED_EDGE('',*,*,#130377,.T.); +#130377 = EDGE_CURVE('',#130370,#130378,#130380,.T.); +#130378 = VERTEX_POINT('',#130379); +#130379 = CARTESIAN_POINT('',(125.632823,-133.536428,1.585)); +#130380 = CIRCLE('',#130381,0.170999251022); +#130381 = AXIS2_PLACEMENT_3D('',#130382,#130383,#130384); +#130382 = CARTESIAN_POINT('',(125.589244,-133.701781,1.585)); +#130383 = DIRECTION('',(0.,0.,1.)); +#130384 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#130385 = ORIENTED_EDGE('',*,*,#130386,.T.); +#130386 = EDGE_CURVE('',#130378,#130387,#130389,.T.); +#130387 = VERTEX_POINT('',#130388); +#130388 = CARTESIAN_POINT('',(125.577799,-133.536428,1.585)); +#130389 = LINE('',#130390,#130391); +#130390 = CARTESIAN_POINT('',(125.632823,-133.536428,1.585)); +#130391 = VECTOR('',#130392,1.); +#130392 = DIRECTION('',(-1.,0.,0.)); +#130393 = ORIENTED_EDGE('',*,*,#130394,.T.); +#130394 = EDGE_CURVE('',#130387,#130395,#130397,.T.); +#130395 = VERTEX_POINT('',#130396); +#130396 = CARTESIAN_POINT('',(125.515243,-133.567706,1.585)); +#130397 = LINE('',#130398,#130399); +#130398 = CARTESIAN_POINT('',(125.577799,-133.536428,1.585)); +#130399 = VECTOR('',#130400,1.); +#130400 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#130401 = ORIENTED_EDGE('',*,*,#130402,.T.); +#130402 = EDGE_CURVE('',#130395,#130403,#130405,.T.); +#130403 = VERTEX_POINT('',#130404); +#130404 = CARTESIAN_POINT('',(125.487303,-133.595646,1.585)); +#130405 = LINE('',#130406,#130407); +#130406 = CARTESIAN_POINT('',(125.515243,-133.567706,1.585)); +#130407 = VECTOR('',#130408,1.); +#130408 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#130409 = ORIENTED_EDGE('',*,*,#130410,.T.); +#130410 = EDGE_CURVE('',#130403,#130411,#130413,.T.); +#130411 = VERTEX_POINT('',#130412); +#130412 = CARTESIAN_POINT('',(125.452353,-133.665546,1.585)); +#130413 = LINE('',#130414,#130415); +#130414 = CARTESIAN_POINT('',(125.487303,-133.595646,1.585)); +#130415 = VECTOR('',#130416,1.); +#130416 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#130417 = ORIENTED_EDGE('',*,*,#130418,.T.); +#130418 = EDGE_CURVE('',#130411,#130419,#130421,.T.); +#130419 = VERTEX_POINT('',#130420); +#130420 = CARTESIAN_POINT('',(125.406306,-133.843354,1.585)); +#130421 = LINE('',#130422,#130423); +#130422 = CARTESIAN_POINT('',(125.452353,-133.665546,1.585)); +#130423 = VECTOR('',#130424,1.); +#130424 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#130425 = ORIENTED_EDGE('',*,*,#130426,.T.); +#130426 = EDGE_CURVE('',#130419,#130427,#130429,.T.); +#130427 = VERTEX_POINT('',#130428); +#130428 = CARTESIAN_POINT('',(125.351273,-133.945962,1.585)); +#130429 = LINE('',#130430,#130431); +#130430 = CARTESIAN_POINT('',(125.406306,-133.843354,1.585)); +#130431 = VECTOR('',#130432,1.); +#130432 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#130433 = ORIENTED_EDGE('',*,*,#130434,.T.); +#130434 = EDGE_CURVE('',#130427,#130435,#130437,.T.); +#130435 = VERTEX_POINT('',#130436); +#130436 = CARTESIAN_POINT('',(125.291523,-134.000995,1.585)); +#130437 = LINE('',#130438,#130439); +#130438 = CARTESIAN_POINT('',(125.351273,-133.945962,1.585)); +#130439 = VECTOR('',#130440,1.); +#130440 = DIRECTION('',(-0.73554445943,-0.677476455829,0.)); +#130441 = ORIENTED_EDGE('',*,*,#130442,.T.); +#130442 = EDGE_CURVE('',#130435,#130443,#130445,.T.); +#130443 = VERTEX_POINT('',#130444); +#130444 = CARTESIAN_POINT('',(124.968013,-133.994608,1.585)); +#130445 = CIRCLE('',#130446,0.260197694649); +#130446 = AXIS2_PLACEMENT_3D('',#130447,#130448,#130449); +#130447 = CARTESIAN_POINT('',(125.13379048924,-133.7940570978,1.585)); +#130448 = DIRECTION('',(-0.,0.,-1.)); +#130449 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#130450 = ORIENTED_EDGE('',*,*,#130451,.T.); +#130451 = EDGE_CURVE('',#130443,#130452,#130454,.T.); +#130452 = VERTEX_POINT('',#130453); +#130453 = CARTESIAN_POINT('',(124.910702,-133.937297,1.585)); +#130454 = LINE('',#130455,#130456); +#130455 = CARTESIAN_POINT('',(124.968013,-133.994608,1.585)); +#130456 = VECTOR('',#130457,1.); +#130457 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#130458 = ORIENTED_EDGE('',*,*,#130459,.T.); +#130459 = EDGE_CURVE('',#130452,#130460,#130462,.T.); +#130460 = VERTEX_POINT('',#130461); +#130461 = CARTESIAN_POINT('',(124.857512,-133.828941,1.585)); +#130462 = LINE('',#130463,#130464); +#130463 = CARTESIAN_POINT('',(124.910702,-133.937297,1.585)); +#130464 = VECTOR('',#130465,1.); +#130465 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#130466 = ORIENTED_EDGE('',*,*,#130467,.T.); +#130467 = EDGE_CURVE('',#130460,#130468,#130470,.T.); +#130468 = VERTEX_POINT('',#130469); +#130469 = CARTESIAN_POINT('',(124.85663,-133.589777,1.585)); +#130470 = LINE('',#130471,#130472); +#130471 = CARTESIAN_POINT('',(124.857512,-133.828941,1.585)); +#130472 = VECTOR('',#130473,1.); +#130473 = DIRECTION('',(-3.687820919426E-03,0.999993199965,0.)); +#130474 = ORIENTED_EDGE('',*,*,#130475,.T.); +#130475 = EDGE_CURVE('',#130468,#130212,#130476,.T.); +#130476 = LINE('',#130477,#130478); +#130477 = CARTESIAN_POINT('',(124.85663,-133.589777,1.585)); +#130478 = VECTOR('',#130479,1.); +#130479 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#130480 = PLANE('',#130481); +#130481 = AXIS2_PLACEMENT_3D('',#130482,#130483,#130484); +#130482 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130483 = DIRECTION('',(0.,0.,1.)); +#130484 = DIRECTION('',(1.,0.,-0.)); +#130485 = SHELL_BASED_SURFACE_MODEL('',(#130486)); +#130486 = OPEN_SHELL('',(#130487)); +#130487 = ADVANCED_FACE('',(#130488),#130729,.T.); +#130488 = FACE_BOUND('',#130489,.F.); +#130489 = EDGE_LOOP('',(#130490,#130501,#130509,#130517,#130525,#130533, + #130542,#130550,#130559,#130567,#130575,#130583,#130591,#130599, + #130607,#130616,#130624,#130632,#130640,#130648,#130657,#130665, + #130673,#130681,#130690,#130698,#130706,#130714,#130723)); +#130490 = ORIENTED_EDGE('',*,*,#130491,.T.); +#130491 = EDGE_CURVE('',#130492,#130494,#130496,.T.); +#130492 = VERTEX_POINT('',#130493); +#130493 = CARTESIAN_POINT('',(127.908882,-132.842856,1.585)); +#130494 = VERTEX_POINT('',#130495); +#130495 = CARTESIAN_POINT('',(127.973882,-132.777856,1.585)); +#130496 = CIRCLE('',#130497,6.500103935387E-02); +#130497 = AXIS2_PLACEMENT_3D('',#130498,#130499,#130500); +#130498 = CARTESIAN_POINT('',(127.97388303934,-132.8428570393,1.585)); +#130499 = DIRECTION('',(0.,0.,-1.)); +#130500 = DIRECTION('',(-0.999999999872,1.598967605495E-05,0.)); +#130501 = ORIENTED_EDGE('',*,*,#130502,.T.); +#130502 = EDGE_CURVE('',#130494,#130503,#130505,.T.); +#130503 = VERTEX_POINT('',#130504); +#130504 = CARTESIAN_POINT('',(128.273882,-132.777856,1.585)); +#130505 = LINE('',#130506,#130507); +#130506 = CARTESIAN_POINT('',(127.973882,-132.777856,1.585)); +#130507 = VECTOR('',#130508,1.); +#130508 = DIRECTION('',(1.,0.,0.)); +#130509 = ORIENTED_EDGE('',*,*,#130510,.T.); +#130510 = EDGE_CURVE('',#130503,#130511,#130513,.T.); +#130511 = VERTEX_POINT('',#130512); +#130512 = CARTESIAN_POINT('',(128.298756,-132.782804,1.585)); +#130513 = LINE('',#130514,#130515); +#130514 = CARTESIAN_POINT('',(128.273882,-132.777856,1.585)); +#130515 = VECTOR('',#130516,1.); +#130516 = DIRECTION('',(0.98078336573,-0.19509994748,0.)); +#130517 = ORIENTED_EDGE('',*,*,#130518,.T.); +#130518 = EDGE_CURVE('',#130511,#130519,#130521,.T.); +#130519 = VERTEX_POINT('',#130520); +#130520 = CARTESIAN_POINT('',(128.319843,-132.796894,1.585)); +#130521 = LINE('',#130522,#130523); +#130522 = CARTESIAN_POINT('',(128.298756,-132.782804,1.585)); +#130523 = VECTOR('',#130524,1.); +#130524 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#130525 = ORIENTED_EDGE('',*,*,#130526,.T.); +#130526 = EDGE_CURVE('',#130519,#130527,#130529,.T.); +#130527 = VERTEX_POINT('',#130528); +#130528 = CARTESIAN_POINT('',(128.371003,-132.852175,1.585)); +#130529 = LINE('',#130530,#130531); +#130530 = CARTESIAN_POINT('',(128.319843,-132.796894,1.585)); +#130531 = VECTOR('',#130532,1.); +#130532 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#130533 = ORIENTED_EDGE('',*,*,#130534,.T.); +#130534 = EDGE_CURVE('',#130527,#130535,#130537,.T.); +#130535 = VERTEX_POINT('',#130536); +#130536 = CARTESIAN_POINT('',(128.370999,-133.262113,1.585)); +#130537 = CIRCLE('',#130538,0.409312568567); +#130538 = AXIS2_PLACEMENT_3D('',#130539,#130540,#130541); +#130539 = CARTESIAN_POINT('',(128.01670664806,-133.0571405429,1.585)); +#130540 = DIRECTION('',(0.,0.,-1.)); +#130541 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#130542 = ORIENTED_EDGE('',*,*,#130543,.T.); +#130543 = EDGE_CURVE('',#130535,#130544,#130546,.T.); +#130544 = VERTEX_POINT('',#130545); +#130545 = CARTESIAN_POINT('',(128.268322,-133.366036,1.585)); +#130546 = LINE('',#130547,#130548); +#130547 = CARTESIAN_POINT('',(128.370999,-133.262113,1.585)); +#130548 = VECTOR('',#130549,1.); +#130549 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#130550 = ORIENTED_EDGE('',*,*,#130551,.T.); +#130551 = EDGE_CURVE('',#130544,#130552,#130554,.T.); +#130552 = VERTEX_POINT('',#130553); +#130553 = CARTESIAN_POINT('',(127.829546,-133.463058,1.585)); +#130554 = CIRCLE('',#130555,0.675422176574); +#130555 = AXIS2_PLACEMENT_3D('',#130556,#130557,#130558); +#130556 = CARTESIAN_POINT('',(127.91141275007,-132.7926156446,1.585)); +#130557 = DIRECTION('',(0.,0.,-1.)); +#130558 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#130559 = ORIENTED_EDGE('',*,*,#130560,.T.); +#130560 = EDGE_CURVE('',#130552,#130561,#130563,.T.); +#130561 = VERTEX_POINT('',#130562); +#130562 = CARTESIAN_POINT('',(127.644813,-133.41528,1.585)); +#130563 = LINE('',#130564,#130565); +#130564 = CARTESIAN_POINT('',(127.829546,-133.463058,1.585)); +#130565 = VECTOR('',#130566,1.); +#130566 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#130567 = ORIENTED_EDGE('',*,*,#130568,.T.); +#130568 = EDGE_CURVE('',#130561,#130569,#130571,.T.); +#130569 = VERTEX_POINT('',#130570); +#130570 = CARTESIAN_POINT('',(127.542206,-133.360247,1.585)); +#130571 = LINE('',#130572,#130573); +#130572 = CARTESIAN_POINT('',(127.644813,-133.41528,1.585)); +#130573 = VECTOR('',#130574,1.); +#130574 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#130575 = ORIENTED_EDGE('',*,*,#130576,.T.); +#130576 = EDGE_CURVE('',#130569,#130577,#130579,.T.); +#130577 = VERTEX_POINT('',#130578); +#130578 = CARTESIAN_POINT('',(127.448191,-133.262109,1.585)); +#130579 = LINE('',#130580,#130581); +#130580 = CARTESIAN_POINT('',(127.542206,-133.360247,1.585)); +#130581 = VECTOR('',#130582,1.); +#130582 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#130583 = ORIENTED_EDGE('',*,*,#130584,.T.); +#130584 = EDGE_CURVE('',#130577,#130585,#130587,.T.); +#130585 = VERTEX_POINT('',#130586); +#130586 = CARTESIAN_POINT('',(127.39663,-133.110221,1.585)); +#130587 = LINE('',#130588,#130589); +#130588 = CARTESIAN_POINT('',(127.448191,-133.262109,1.585)); +#130589 = VECTOR('',#130590,1.); +#130590 = DIRECTION('',(-0.321450486559,0.946926388211,0.)); +#130591 = ORIENTED_EDGE('',*,*,#130592,.T.); +#130592 = EDGE_CURVE('',#130585,#130593,#130595,.T.); +#130593 = VERTEX_POINT('',#130594); +#130594 = CARTESIAN_POINT('',(127.397512,-132.956771,1.585)); +#130595 = LINE('',#130596,#130597); +#130596 = CARTESIAN_POINT('',(127.39663,-133.110221,1.585)); +#130597 = VECTOR('',#130598,1.); +#130598 = DIRECTION('',(5.747705643239E-03,0.999983481803,0.)); +#130599 = ORIENTED_EDGE('',*,*,#130600,.T.); +#130600 = EDGE_CURVE('',#130593,#130601,#130603,.T.); +#130601 = VERTEX_POINT('',#130602); +#130602 = CARTESIAN_POINT('',(127.444316,-132.856644,1.585)); +#130603 = LINE('',#130604,#130605); +#130604 = CARTESIAN_POINT('',(127.397512,-132.956771,1.585)); +#130605 = VECTOR('',#130606,1.); +#130606 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#130607 = ORIENTED_EDGE('',*,*,#130608,.T.); +#130608 = EDGE_CURVE('',#130601,#130609,#130611,.T.); +#130609 = VERTEX_POINT('',#130610); +#130610 = CARTESIAN_POINT('',(127.560592,-132.914782,1.585)); +#130611 = CIRCLE('',#130612,6.500026004258E-02); +#130612 = AXIS2_PLACEMENT_3D('',#130613,#130614,#130615); +#130613 = CARTESIAN_POINT('',(127.50245365279,-132.8857136944,1.585)); +#130614 = DIRECTION('',(0.,0.,-1.)); +#130615 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#130616 = ORIENTED_EDGE('',*,*,#130617,.T.); +#130617 = EDGE_CURVE('',#130609,#130618,#130620,.T.); +#130618 = VERTEX_POINT('',#130619); +#130619 = CARTESIAN_POINT('',(127.524597,-132.986772,1.585)); +#130620 = LINE('',#130621,#130622); +#130621 = CARTESIAN_POINT('',(127.560592,-132.914782,1.585)); +#130622 = VECTOR('',#130623,1.); +#130623 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#130624 = ORIENTED_EDGE('',*,*,#130625,.T.); +#130625 = EDGE_CURVE('',#130618,#130626,#130628,.T.); +#130626 = VERTEX_POINT('',#130627); +#130627 = CARTESIAN_POINT('',(127.524597,-133.089452,1.585)); +#130628 = LINE('',#130629,#130630); +#130629 = CARTESIAN_POINT('',(127.524597,-132.986772,1.585)); +#130630 = VECTOR('',#130631,1.); +#130631 = DIRECTION('',(0.,-1.,0.)); +#130632 = ORIENTED_EDGE('',*,*,#130633,.T.); +#130633 = EDGE_CURVE('',#130626,#130634,#130636,.T.); +#130634 = VERTEX_POINT('',#130635); +#130635 = CARTESIAN_POINT('',(127.559265,-133.193457,1.585)); +#130636 = LINE('',#130637,#130638); +#130637 = CARTESIAN_POINT('',(127.524597,-133.089452,1.585)); +#130638 = VECTOR('',#130639,1.); +#130639 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#130640 = ORIENTED_EDGE('',*,*,#130641,.T.); +#130641 = EDGE_CURVE('',#130634,#130642,#130644,.T.); +#130642 = VERTEX_POINT('',#130643); +#130643 = CARTESIAN_POINT('',(127.626669,-133.260863,1.585)); +#130644 = LINE('',#130645,#130646); +#130645 = CARTESIAN_POINT('',(127.559265,-133.193457,1.585)); +#130646 = VECTOR('',#130647,1.); +#130647 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#130648 = ORIENTED_EDGE('',*,*,#130649,.T.); +#130649 = EDGE_CURVE('',#130642,#130650,#130652,.T.); +#130650 = VERTEX_POINT('',#130651); +#130651 = CARTESIAN_POINT('',(127.965881,-133.334999,1.585)); +#130652 = CIRCLE('',#130653,0.553317785494); +#130653 = AXIS2_PLACEMENT_3D('',#130654,#130655,#130656); +#130654 = CARTESIAN_POINT('',(127.9084500839,-132.7846697697,1.585)); +#130655 = DIRECTION('',(0.,0.,1.)); +#130656 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#130657 = ORIENTED_EDGE('',*,*,#130658,.T.); +#130658 = EDGE_CURVE('',#130650,#130659,#130661,.T.); +#130659 = VERTEX_POINT('',#130660); +#130660 = CARTESIAN_POINT('',(128.122622,-133.295813,1.585)); +#130661 = LINE('',#130662,#130663); +#130662 = CARTESIAN_POINT('',(127.965881,-133.334999,1.585)); +#130663 = VECTOR('',#130664,1.); +#130664 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#130665 = ORIENTED_EDGE('',*,*,#130666,.T.); +#130666 = EDGE_CURVE('',#130659,#130667,#130669,.T.); +#130667 = VERTEX_POINT('',#130668); +#130668 = CARTESIAN_POINT('',(128.192522,-133.260864,1.585)); +#130669 = LINE('',#130670,#130671); +#130670 = CARTESIAN_POINT('',(128.122622,-133.295813,1.585)); +#130671 = VECTOR('',#130672,1.); +#130672 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#130673 = ORIENTED_EDGE('',*,*,#130674,.T.); +#130674 = EDGE_CURVE('',#130667,#130675,#130677,.T.); +#130675 = VERTEX_POINT('',#130676); +#130676 = CARTESIAN_POINT('',(128.259928,-133.193457,1.585)); +#130677 = LINE('',#130678,#130679); +#130678 = CARTESIAN_POINT('',(128.192522,-133.260864,1.585)); +#130679 = VECTOR('',#130680,1.); +#130680 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#130681 = ORIENTED_EDGE('',*,*,#130682,.T.); +#130682 = EDGE_CURVE('',#130675,#130683,#130685,.T.); +#130683 = VERTEX_POINT('',#130684); +#130684 = CARTESIAN_POINT('',(128.259928,-132.920825,1.585)); +#130685 = CIRCLE('',#130686,0.272194686174); +#130686 = AXIS2_PLACEMENT_3D('',#130687,#130688,#130689); +#130687 = CARTESIAN_POINT('',(128.02432686391,-133.057141,1.585)); +#130688 = DIRECTION('',(0.,-0.,1.)); +#130689 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#130690 = ORIENTED_EDGE('',*,*,#130691,.T.); +#130691 = EDGE_CURVE('',#130683,#130692,#130694,.T.); +#130692 = VERTEX_POINT('',#130693); +#130693 = CARTESIAN_POINT('',(128.246959,-132.907856,1.585)); +#130694 = LINE('',#130695,#130696); +#130695 = CARTESIAN_POINT('',(128.259928,-132.920825,1.585)); +#130696 = VECTOR('',#130697,1.); +#130697 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#130698 = ORIENTED_EDGE('',*,*,#130699,.T.); +#130699 = EDGE_CURVE('',#130692,#130700,#130702,.T.); +#130700 = VERTEX_POINT('',#130701); +#130701 = CARTESIAN_POINT('',(128.038882,-132.907856,1.585)); +#130702 = LINE('',#130703,#130704); +#130703 = CARTESIAN_POINT('',(128.246959,-132.907856,1.585)); +#130704 = VECTOR('',#130705,1.); +#130705 = DIRECTION('',(-1.,0.,0.)); +#130706 = ORIENTED_EDGE('',*,*,#130707,.T.); +#130707 = EDGE_CURVE('',#130700,#130708,#130710,.T.); +#130708 = VERTEX_POINT('',#130709); +#130709 = CARTESIAN_POINT('',(128.038882,-133.014285,1.585)); +#130710 = LINE('',#130711,#130712); +#130711 = CARTESIAN_POINT('',(128.038882,-132.907856,1.585)); +#130712 = VECTOR('',#130713,1.); +#130713 = DIRECTION('',(0.,-1.,0.)); +#130714 = ORIENTED_EDGE('',*,*,#130715,.T.); +#130715 = EDGE_CURVE('',#130708,#130716,#130718,.T.); +#130716 = VERTEX_POINT('',#130717); +#130717 = CARTESIAN_POINT('',(127.908882,-133.014285,1.585)); +#130718 = CIRCLE('',#130719,6.500000000091E-02); +#130719 = AXIS2_PLACEMENT_3D('',#130720,#130721,#130722); +#130720 = CARTESIAN_POINT('',(127.973882,-133.0142846551,1.585)); +#130721 = DIRECTION('',(-0.,0.,-1.)); +#130722 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#130723 = ORIENTED_EDGE('',*,*,#130724,.T.); +#130724 = EDGE_CURVE('',#130716,#130492,#130725,.T.); +#130725 = LINE('',#130726,#130727); +#130726 = CARTESIAN_POINT('',(127.908882,-133.014285,1.585)); +#130727 = VECTOR('',#130728,1.); +#130728 = DIRECTION('',(0.,1.,0.)); +#130729 = PLANE('',#130730); +#130730 = AXIS2_PLACEMENT_3D('',#130731,#130732,#130733); +#130731 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130732 = DIRECTION('',(0.,0.,1.)); +#130733 = DIRECTION('',(1.,0.,-0.)); +#130734 = SHELL_BASED_SURFACE_MODEL('',(#130735)); +#130735 = OPEN_SHELL('',(#130736)); +#130736 = ADVANCED_FACE('',(#130737),#130864,.T.); +#130737 = FACE_BOUND('',#130738,.F.); +#130738 = EDGE_LOOP('',(#130739,#130750,#130758,#130767,#130775,#130783, + #130792,#130800,#130809,#130817,#130825,#130834,#130842,#130850, + #130858)); +#130739 = ORIENTED_EDGE('',*,*,#130740,.T.); +#130740 = EDGE_CURVE('',#130741,#130743,#130745,.T.); +#130741 = VERTEX_POINT('',#130742); +#130742 = CARTESIAN_POINT('',(124.855417,-132.410288,1.585)); +#130743 = VERTEX_POINT('',#130744); +#130744 = CARTESIAN_POINT('',(124.934652,-132.336768,1.585)); +#130745 = CIRCLE('',#130746,6.499974290214E-02); +#130746 = AXIS2_PLACEMENT_3D('',#130747,#130748,#130749); +#130747 = CARTESIAN_POINT('',(124.91959745151,-132.4000003267,1.585)); +#130748 = DIRECTION('',(0.,0.,-1.)); +#130749 = DIRECTION('',(-0.987395467259,-0.158272522053,-0.)); +#130750 = ORIENTED_EDGE('',*,*,#130751,.T.); +#130751 = EDGE_CURVE('',#130743,#130752,#130754,.T.); +#130752 = VERTEX_POINT('',#130753); +#130753 = CARTESIAN_POINT('',(125.834652,-132.551052,1.585)); +#130754 = LINE('',#130755,#130756); +#130755 = CARTESIAN_POINT('',(124.934652,-132.336768,1.585)); +#130756 = VECTOR('',#130757,1.); +#130757 = DIRECTION('',(0.972806632197,-0.231618773749,0.)); +#130758 = ORIENTED_EDGE('',*,*,#130759,.T.); +#130759 = EDGE_CURVE('',#130752,#130760,#130762,.T.); +#130760 = VERTEX_POINT('',#130761); +#130761 = CARTESIAN_POINT('',(125.836345,-132.67709,1.585)); +#130762 = CIRCLE('',#130763,6.500038054112E-02); +#130763 = AXIS2_PLACEMENT_3D('',#130764,#130765,#130766); +#130764 = CARTESIAN_POINT('',(125.81959589274,-132.614284611,1.585)); +#130765 = DIRECTION('',(0.,0.,-1.)); +#130766 = DIRECTION('',(0.231631063247,0.972803706068,0.)); +#130767 = ORIENTED_EDGE('',*,*,#130768,.T.); +#130768 = EDGE_CURVE('',#130760,#130769,#130771,.T.); +#130769 = VERTEX_POINT('',#130770); +#130770 = CARTESIAN_POINT('',(125.429006,-132.785713,1.585)); +#130771 = LINE('',#130772,#130773); +#130772 = CARTESIAN_POINT('',(125.836345,-132.67709,1.585)); +#130773 = VECTOR('',#130774,1.); +#130774 = DIRECTION('',(-0.966235372674,-0.257661026531,0.)); +#130775 = ORIENTED_EDGE('',*,*,#130776,.T.); +#130776 = EDGE_CURVE('',#130769,#130777,#130779,.T.); +#130777 = VERTEX_POINT('',#130778); +#130778 = CARTESIAN_POINT('',(125.836345,-132.894337,1.585)); +#130779 = LINE('',#130780,#130781); +#130780 = CARTESIAN_POINT('',(125.429006,-132.785713,1.585)); +#130781 = VECTOR('',#130782,1.); +#130782 = DIRECTION('',(0.96623478212,-0.257663241116,0.)); +#130783 = ORIENTED_EDGE('',*,*,#130784,.T.); +#130784 = EDGE_CURVE('',#130777,#130785,#130787,.T.); +#130785 = VERTEX_POINT('',#130786); +#130786 = CARTESIAN_POINT('',(125.834653,-133.020374,1.585)); +#130787 = CIRCLE('',#130788,6.499990114103E-02); +#130788 = AXIS2_PLACEMENT_3D('',#130789,#130790,#130791); +#130789 = CARTESIAN_POINT('',(125.81959634257,-132.9571420127,1.585)); +#130790 = DIRECTION('',(0.,0.,-1.)); +#130791 = DIRECTION('',(0.257672044635,0.966232434466,0.)); +#130792 = ORIENTED_EDGE('',*,*,#130793,.T.); +#130793 = EDGE_CURVE('',#130785,#130794,#130796,.T.); +#130794 = VERTEX_POINT('',#130795); +#130795 = CARTESIAN_POINT('',(124.934652,-133.23466,1.585)); +#130796 = LINE('',#130797,#130798); +#130797 = CARTESIAN_POINT('',(125.834653,-133.020374,1.585)); +#130798 = VECTOR('',#130799,1.); +#130799 = DIRECTION('',(-0.972806203088,-0.231620576016,0.)); +#130800 = ORIENTED_EDGE('',*,*,#130801,.T.); +#130801 = EDGE_CURVE('',#130794,#130802,#130804,.T.); +#130802 = VERTEX_POINT('',#130803); +#130803 = CARTESIAN_POINT('',(124.904542,-133.108196,1.585)); +#130804 = CIRCLE('',#130805,6.499952960857E-02); +#130805 = AXIS2_PLACEMENT_3D('',#130806,#130807,#130808); +#130806 = CARTESIAN_POINT('',(124.91959643655,-133.1714281341,1.585)); +#130807 = DIRECTION('',(0.,0.,-1.)); +#130808 = DIRECTION('',(0.231625729228,-0.972804976118,0.)); +#130809 = ORIENTED_EDGE('',*,*,#130810,.T.); +#130810 = EDGE_CURVE('',#130802,#130811,#130813,.T.); +#130811 = VERTEX_POINT('',#130812); +#130812 = CARTESIAN_POINT('',(125.553951,-132.953574,1.585)); +#130813 = LINE('',#130814,#130815); +#130814 = CARTESIAN_POINT('',(124.904542,-133.108196,1.585)); +#130815 = VECTOR('',#130816,1.); +#130816 = DIRECTION('',(0.972805941447,0.231621674905,0.)); +#130817 = ORIENTED_EDGE('',*,*,#130818,.T.); +#130818 = EDGE_CURVE('',#130811,#130819,#130821,.T.); +#130819 = VERTEX_POINT('',#130820); +#130820 = CARTESIAN_POINT('',(125.159992,-132.848519,1.585)); +#130821 = LINE('',#130822,#130823); +#130822 = CARTESIAN_POINT('',(125.553951,-132.953574,1.585)); +#130823 = VECTOR('',#130824,1.); +#130824 = DIRECTION('',(-0.966235387383,0.257660971374,0.)); +#130825 = ORIENTED_EDGE('',*,*,#130826,.T.); +#130826 = EDGE_CURVE('',#130819,#130827,#130829,.T.); +#130827 = VERTEX_POINT('',#130828); +#130828 = CARTESIAN_POINT('',(125.159992,-132.722909,1.585)); +#130829 = CIRCLE('',#130830,6.499988512274E-02); +#130830 = AXIS2_PLACEMENT_3D('',#130831,#130832,#130833); +#130831 = CARTESIAN_POINT('',(125.17674064295,-132.785714,1.585)); +#130832 = DIRECTION('',(0.,0.,-1.)); +#130833 = DIRECTION('',(-0.257671885533,-0.966232476895,-0.)); +#130834 = ORIENTED_EDGE('',*,*,#130835,.T.); +#130835 = EDGE_CURVE('',#130827,#130836,#130838,.T.); +#130836 = VERTEX_POINT('',#130837); +#130837 = CARTESIAN_POINT('',(125.553951,-132.617852,1.585)); +#130838 = LINE('',#130839,#130840); +#130839 = CARTESIAN_POINT('',(125.159992,-132.722909,1.585)); +#130840 = VECTOR('',#130841,1.); +#130841 = DIRECTION('',(0.966234166155,0.257665550968,0.)); +#130842 = ORIENTED_EDGE('',*,*,#130843,.T.); +#130843 = EDGE_CURVE('',#130836,#130844,#130846,.T.); +#130844 = VERTEX_POINT('',#130845); +#130845 = CARTESIAN_POINT('',(124.904542,-132.463232,1.585)); +#130846 = LINE('',#130847,#130848); +#130847 = CARTESIAN_POINT('',(125.553951,-132.617852,1.585)); +#130848 = VECTOR('',#130849,1.); +#130849 = DIRECTION('',(-0.972806616505,0.231618839659,0.)); +#130850 = ORIENTED_EDGE('',*,*,#130851,.T.); +#130851 = EDGE_CURVE('',#130844,#130852,#130854,.T.); +#130852 = VERTEX_POINT('',#130853); +#130853 = CARTESIAN_POINT('',(124.88149,-132.452658,1.585)); +#130854 = LINE('',#130855,#130856); +#130855 = CARTESIAN_POINT('',(124.904542,-132.463232,1.585)); +#130856 = VECTOR('',#130857,1.); +#130857 = DIRECTION('',(-0.908937835688,0.416931662092,0.)); +#130858 = ORIENTED_EDGE('',*,*,#130859,.T.); +#130859 = EDGE_CURVE('',#130852,#130741,#130860,.T.); +#130860 = LINE('',#130861,#130862); +#130861 = CARTESIAN_POINT('',(124.88149,-132.452658,1.585)); +#130862 = VECTOR('',#130863,1.); +#130863 = DIRECTION('',(-0.524085089139,0.851665908289,0.)); +#130864 = PLANE('',#130865); +#130865 = AXIS2_PLACEMENT_3D('',#130866,#130867,#130868); +#130866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130867 = DIRECTION('',(0.,0.,1.)); +#130868 = DIRECTION('',(1.,0.,-0.)); +#130869 = SHELL_BASED_SURFACE_MODEL('',(#130870)); +#130870 = OPEN_SHELL('',(#130871)); +#130871 = ADVANCED_FACE('',(#130872),#130991,.T.); +#130872 = FACE_BOUND('',#130873,.F.); +#130873 = EDGE_LOOP('',(#130874,#130885,#130893,#130902,#130910,#130918, + #130927,#130935,#130944,#130952,#130960,#130969,#130977,#130985)); +#130874 = ORIENTED_EDGE('',*,*,#130875,.T.); +#130875 = EDGE_CURVE('',#130876,#130878,#130880,.T.); +#130876 = VERTEX_POINT('',#130877); +#130877 = CARTESIAN_POINT('',(148.052559,-131.99984,1.585)); +#130878 = VERTEX_POINT('',#130879); +#130879 = CARTESIAN_POINT('',(148.176532,-132.072191,1.585)); +#130880 = CIRCLE('',#130881,7.49999788012E-02); +#130881 = AXIS2_PLACEMENT_3D('',#130882,#130883,#130884); +#130882 = CARTESIAN_POINT('',(148.10357162542,-132.0548191675,1.585)); +#130883 = DIRECTION('',(0.,0.,-1.)); +#130884 = DIRECTION('',(-0.680168531214,0.733055774922,0.)); +#130885 = ORIENTED_EDGE('',*,*,#130886,.T.); +#130886 = EDGE_CURVE('',#130878,#130887,#130889,.T.); +#130887 = VERTEX_POINT('',#130888); +#130888 = CARTESIAN_POINT('',(147.933646,-133.086091,1.585)); +#130889 = LINE('',#130890,#130891); +#130890 = CARTESIAN_POINT('',(148.176532,-132.072191,1.585)); +#130891 = VECTOR('',#130892,1.); +#130892 = DIRECTION('',(-0.232964820327,-0.972485163121,0.)); +#130893 = ORIENTED_EDGE('',*,*,#130894,.T.); +#130894 = EDGE_CURVE('',#130887,#130895,#130897,.T.); +#130895 = VERTEX_POINT('',#130896); +#130896 = CARTESIAN_POINT('',(147.793008,-133.074144,1.585)); +#130897 = CIRCLE('',#130898,7.500055331745E-02); +#130898 = AXIS2_PLACEMENT_3D('',#130899,#130900,#130901); +#130899 = CARTESIAN_POINT('',(147.86547608181,-133.0548188837,1.585)); +#130900 = DIRECTION('',(-0.,0.,-1.)); +#130901 = DIRECTION('',(0.908925536853,-0.416958473301,-0.)); +#130902 = ORIENTED_EDGE('',*,*,#130903,.T.); +#130903 = EDGE_CURVE('',#130895,#130904,#130906,.T.); +#130904 = VERTEX_POINT('',#130905); +#130905 = CARTESIAN_POINT('',(147.674999,-132.631613,1.585)); +#130906 = LINE('',#130907,#130908); +#130907 = CARTESIAN_POINT('',(147.793008,-133.074144,1.585)); +#130908 = VECTOR('',#130909,1.); +#130909 = DIRECTION('',(-0.257664145438,0.966234540966,0.)); +#130910 = ORIENTED_EDGE('',*,*,#130911,.T.); +#130911 = EDGE_CURVE('',#130904,#130912,#130914,.T.); +#130912 = VERTEX_POINT('',#130913); +#130913 = CARTESIAN_POINT('',(147.551829,-133.08791,1.585)); +#130914 = LINE('',#130915,#130916); +#130915 = CARTESIAN_POINT('',(147.674999,-132.631613,1.585)); +#130916 = VECTOR('',#130917,1.); +#130917 = DIRECTION('',(-0.260606315218,-0.965445155598,0.)); +#130918 = ORIENTED_EDGE('',*,*,#130919,.T.); +#130919 = EDGE_CURVE('',#130912,#130920,#130922,.T.); +#130920 = VERTEX_POINT('',#130921); +#130921 = CARTESIAN_POINT('',(147.411564,-133.072191,1.585)); +#130922 = CIRCLE('',#130923,7.499976850751E-02); +#130923 = AXIS2_PLACEMENT_3D('',#130924,#130925,#130926); +#130924 = CARTESIAN_POINT('',(147.48452410899,-133.05481896,1.585)); +#130925 = DIRECTION('',(-0.,0.,-1.)); +#130926 = DIRECTION('',(0.897401316583,-0.441215227519,-0.)); +#130927 = ORIENTED_EDGE('',*,*,#130928,.T.); +#130928 = EDGE_CURVE('',#130920,#130929,#130931,.T.); +#130929 = VERTEX_POINT('',#130930); +#130930 = CARTESIAN_POINT('',(147.171481,-132.057623,1.585)); +#130931 = LINE('',#130932,#130933); +#130932 = CARTESIAN_POINT('',(147.411564,-133.072191,1.585)); +#130933 = VECTOR('',#130934,1.); +#130934 = DIRECTION('',(-0.23027618176,0.97312531573,0.)); +#130935 = ORIENTED_EDGE('',*,*,#130936,.T.); +#130936 = EDGE_CURVE('',#130929,#130937,#130939,.T.); +#130937 = VERTEX_POINT('',#130938); +#130938 = CARTESIAN_POINT('',(147.319389,-132.037447,1.585)); +#130939 = CIRCLE('',#130940,7.499999556138E-02); +#130940 = AXIS2_PLACEMENT_3D('',#130941,#130942,#130943); +#130941 = CARTESIAN_POINT('',(147.2464285449,-132.0548185666,1.585)); +#130942 = DIRECTION('',(0.,0.,-1.)); +#130943 = DIRECTION('',(-0.999300657904,-3.739244726435E-02,-0.)); +#130944 = ORIENTED_EDGE('',*,*,#130945,.T.); +#130945 = EDGE_CURVE('',#130937,#130946,#130948,.T.); +#130946 = VERTEX_POINT('',#130947); +#130947 = CARTESIAN_POINT('',(147.48864,-132.748303,1.585)); +#130948 = LINE('',#130949,#130950); +#130949 = CARTESIAN_POINT('',(147.319389,-132.037447,1.585)); +#130950 = VECTOR('',#130951,1.); +#130951 = DIRECTION('',(0.231619972271,-0.972806346836,0.)); +#130952 = ORIENTED_EDGE('',*,*,#130953,.T.); +#130953 = EDGE_CURVE('',#130946,#130954,#130956,.T.); +#130954 = VERTEX_POINT('',#130955); +#130955 = CARTESIAN_POINT('',(147.607695,-132.307441,1.585)); +#130956 = LINE('',#130957,#130958); +#130957 = CARTESIAN_POINT('',(147.48864,-132.748303,1.585)); +#130958 = VECTOR('',#130959,1.); +#130959 = DIRECTION('',(0.260711285702,0.96541681439,0.)); +#130960 = ORIENTED_EDGE('',*,*,#130961,.T.); +#130961 = EDGE_CURVE('',#130954,#130962,#130964,.T.); +#130962 = VERTEX_POINT('',#130963); +#130963 = CARTESIAN_POINT('',(147.747468,-132.321208,1.585)); +#130964 = CIRCLE('',#130965,7.500013992439E-02); +#130965 = AXIS2_PLACEMENT_3D('',#130966,#130967,#130968); +#130966 = CARTESIAN_POINT('',(147.67500014547,-132.3405323641,1.585)); +#130967 = DIRECTION('',(0.,0.,-1.)); +#130968 = DIRECTION('',(-0.897400265457,0.44121736543,0.)); +#130969 = ORIENTED_EDGE('',*,*,#130970,.T.); +#130970 = EDGE_CURVE('',#130962,#130971,#130973,.T.); +#130971 = VERTEX_POINT('',#130972); +#130972 = CARTESIAN_POINT('',(147.861359,-132.748303,1.585)); +#130973 = LINE('',#130974,#130975); +#130974 = CARTESIAN_POINT('',(147.747468,-132.321208,1.585)); +#130975 = VECTOR('',#130976,1.); +#130976 = DIRECTION('',(0.257660538414,-0.966235502838,0.)); +#130977 = ORIENTED_EDGE('',*,*,#130978,.T.); +#130978 = EDGE_CURVE('',#130971,#130979,#130981,.T.); +#130979 = VERTEX_POINT('',#130980); +#130980 = CARTESIAN_POINT('',(148.035402,-132.023547,1.585)); +#130981 = LINE('',#130982,#130983); +#130982 = CARTESIAN_POINT('',(147.861359,-132.748303,1.585)); +#130983 = VECTOR('',#130984,1.); +#130984 = DIRECTION('',(0.233501785734,0.972356372972,0.)); +#130985 = ORIENTED_EDGE('',*,*,#130986,.T.); +#130986 = EDGE_CURVE('',#130979,#130876,#130987,.T.); +#130987 = LINE('',#130988,#130989); +#130988 = CARTESIAN_POINT('',(148.035402,-132.023547,1.585)); +#130989 = VECTOR('',#130990,1.); +#130990 = DIRECTION('',(0.586282529115,0.810106657209,0.)); +#130991 = PLANE('',#130992); +#130992 = AXIS2_PLACEMENT_3D('',#130993,#130994,#130995); +#130993 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130994 = DIRECTION('',(0.,0.,1.)); +#130995 = DIRECTION('',(1.,0.,-0.)); +#130996 = SHELL_BASED_SURFACE_MODEL('',(#130997)); +#130997 = OPEN_SHELL('',(#130998)); +#130998 = ADVANCED_FACE('',(#130999),#131247,.T.); +#130999 = FACE_BOUND('',#131000,.F.); +#131000 = EDGE_LOOP('',(#131001,#131011,#131019,#131027,#131035,#131044, + #131052,#131060,#131068,#131076,#131085,#131093,#131101,#131109, + #131118,#131126,#131134,#131142,#131151,#131159,#131168,#131176, + #131184,#131192,#131201,#131209,#131217,#131225,#131233,#131241)); +#131001 = ORIENTED_EDGE('',*,*,#131002,.T.); +#131002 = EDGE_CURVE('',#131003,#131005,#131007,.T.); +#131003 = VERTEX_POINT('',#131004); +#131004 = CARTESIAN_POINT('',(149.426772,-132.150392,1.585)); +#131005 = VERTEX_POINT('',#131006); +#131006 = CARTESIAN_POINT('',(149.542619,-132.037281,1.585)); +#131007 = LINE('',#131008,#131009); +#131008 = CARTESIAN_POINT('',(149.426772,-132.150392,1.585)); +#131009 = VECTOR('',#131010,1.); +#131010 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#131011 = ORIENTED_EDGE('',*,*,#131012,.T.); +#131012 = EDGE_CURVE('',#131005,#131013,#131015,.T.); +#131013 = VERTEX_POINT('',#131014); +#131014 = CARTESIAN_POINT('',(149.715212,-131.980548,1.585)); +#131015 = LINE('',#131016,#131017); +#131016 = CARTESIAN_POINT('',(149.542619,-132.037281,1.585)); +#131017 = VECTOR('',#131018,1.); +#131018 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#131019 = ORIENTED_EDGE('',*,*,#131020,.T.); +#131020 = EDGE_CURVE('',#131013,#131021,#131023,.T.); +#131021 = VERTEX_POINT('',#131022); +#131022 = CARTESIAN_POINT('',(149.880108,-131.98126,1.585)); +#131023 = LINE('',#131024,#131025); +#131024 = CARTESIAN_POINT('',(149.715212,-131.980548,1.585)); +#131025 = VECTOR('',#131026,1.); +#131026 = DIRECTION('',(0.999990678116,-4.317832832887E-03,0.)); +#131027 = ORIENTED_EDGE('',*,*,#131028,.T.); +#131028 = EDGE_CURVE('',#131021,#131029,#131031,.T.); +#131029 = VERTEX_POINT('',#131030); +#131030 = CARTESIAN_POINT('',(150.006698,-132.043188,1.585)); +#131031 = LINE('',#131032,#131033); +#131032 = CARTESIAN_POINT('',(149.880108,-131.98126,1.585)); +#131033 = VECTOR('',#131034,1.); +#131034 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#131035 = ORIENTED_EDGE('',*,*,#131036,.T.); +#131036 = EDGE_CURVE('',#131029,#131037,#131039,.T.); +#131037 = VERTEX_POINT('',#131038); +#131038 = CARTESIAN_POINT('',(149.927173,-132.16952,1.585)); +#131039 = CIRCLE('',#131040,7.500029440362E-02); +#131040 = AXIS2_PLACEMENT_3D('',#131041,#131042,#131043); +#131041 = CARTESIAN_POINT('',(149.96071405397,-132.1024376486,1.585)); +#131042 = DIRECTION('',(0.,0.,-1.)); +#131043 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#131044 = ORIENTED_EDGE('',*,*,#131045,.T.); +#131045 = EDGE_CURVE('',#131037,#131046,#131048,.T.); +#131046 = VERTEX_POINT('',#131047); +#131047 = CARTESIAN_POINT('',(149.847771,-132.129819,1.585)); +#131048 = LINE('',#131049,#131050); +#131049 = CARTESIAN_POINT('',(149.927173,-132.16952,1.585)); +#131050 = VECTOR('',#131051,1.); +#131051 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#131052 = ORIENTED_EDGE('',*,*,#131053,.T.); +#131053 = EDGE_CURVE('',#131046,#131054,#131056,.T.); +#131054 = VERTEX_POINT('',#131055); +#131055 = CARTESIAN_POINT('',(149.734789,-132.129819,1.585)); +#131056 = LINE('',#131057,#131058); +#131057 = CARTESIAN_POINT('',(149.847771,-132.129819,1.585)); +#131058 = VECTOR('',#131059,1.); +#131059 = DIRECTION('',(-1.,0.,0.)); +#131060 = ORIENTED_EDGE('',*,*,#131061,.T.); +#131061 = EDGE_CURVE('',#131054,#131062,#131064,.T.); +#131062 = VERTEX_POINT('',#131063); +#131063 = CARTESIAN_POINT('',(149.620276,-132.16799,1.585)); +#131064 = LINE('',#131065,#131066); +#131065 = CARTESIAN_POINT('',(149.734789,-132.129819,1.585)); +#131066 = VECTOR('',#131067,1.); +#131067 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#131068 = ORIENTED_EDGE('',*,*,#131069,.T.); +#131069 = EDGE_CURVE('',#131062,#131070,#131072,.T.); +#131070 = VERTEX_POINT('',#131071); +#131071 = CARTESIAN_POINT('',(149.546163,-132.242103,1.585)); +#131072 = LINE('',#131073,#131074); +#131073 = CARTESIAN_POINT('',(149.620276,-132.16799,1.585)); +#131074 = VECTOR('',#131075,1.); +#131075 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#131076 = ORIENTED_EDGE('',*,*,#131077,.T.); +#131077 = EDGE_CURVE('',#131070,#131078,#131080,.T.); +#131078 = VERTEX_POINT('',#131079); +#131079 = CARTESIAN_POINT('',(149.464286,-132.617013,1.585)); +#131080 = CIRCLE('',#131081,0.611712714363); +#131081 = AXIS2_PLACEMENT_3D('',#131082,#131083,#131084); +#131082 = CARTESIAN_POINT('',(150.07269127521,-132.5534876822,1.585)); +#131083 = DIRECTION('',(0.,0.,1.)); +#131084 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#131085 = ORIENTED_EDGE('',*,*,#131086,.T.); +#131086 = EDGE_CURVE('',#131078,#131087,#131089,.T.); +#131087 = VERTEX_POINT('',#131088); +#131088 = CARTESIAN_POINT('',(149.507669,-132.790547,1.585)); +#131089 = LINE('',#131090,#131091); +#131090 = CARTESIAN_POINT('',(149.464286,-132.617013,1.585)); +#131091 = VECTOR('',#131092,1.); +#131092 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#131093 = ORIENTED_EDGE('',*,*,#131094,.T.); +#131094 = EDGE_CURVE('',#131087,#131095,#131097,.T.); +#131095 = VERTEX_POINT('',#131096); +#131096 = CARTESIAN_POINT('',(149.546163,-132.867534,1.585)); +#131097 = LINE('',#131098,#131099); +#131098 = CARTESIAN_POINT('',(149.507669,-132.790547,1.585)); +#131099 = VECTOR('',#131100,1.); +#131100 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#131101 = ORIENTED_EDGE('',*,*,#131102,.T.); +#131102 = EDGE_CURVE('',#131095,#131103,#131105,.T.); +#131103 = VERTEX_POINT('',#131104); +#131104 = CARTESIAN_POINT('',(149.620276,-132.941648,1.585)); +#131105 = LINE('',#131106,#131107); +#131106 = CARTESIAN_POINT('',(149.546163,-132.867534,1.585)); +#131107 = VECTOR('',#131108,1.); +#131108 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#131109 = ORIENTED_EDGE('',*,*,#131110,.T.); +#131110 = EDGE_CURVE('',#131103,#131111,#131113,.T.); +#131111 = VERTEX_POINT('',#131112); +#131112 = CARTESIAN_POINT('',(149.9202,-132.941647,1.585)); +#131113 = CIRCLE('',#131114,0.299305962385); +#131114 = AXIS2_PLACEMENT_3D('',#131115,#131116,#131117); +#131115 = CARTESIAN_POINT('',(149.77023713635,-132.6826195909,1.585)); +#131116 = DIRECTION('',(0.,0.,1.)); +#131117 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#131118 = ORIENTED_EDGE('',*,*,#131119,.T.); +#131119 = EDGE_CURVE('',#131111,#131120,#131122,.T.); +#131120 = VERTEX_POINT('',#131121); +#131121 = CARTESIAN_POINT('',(149.933333,-132.928514,1.585)); +#131122 = LINE('',#131123,#131124); +#131123 = CARTESIAN_POINT('',(149.9202,-132.941647,1.585)); +#131124 = VECTOR('',#131125,1.); +#131125 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#131126 = ORIENTED_EDGE('',*,*,#131127,.T.); +#131127 = EDGE_CURVE('',#131120,#131128,#131130,.T.); +#131128 = VERTEX_POINT('',#131129); +#131129 = CARTESIAN_POINT('',(149.933333,-132.701247,1.585)); +#131130 = LINE('',#131131,#131132); +#131131 = CARTESIAN_POINT('',(149.933333,-132.928514,1.585)); +#131132 = VECTOR('',#131133,1.); +#131133 = DIRECTION('',(0.,1.,0.)); +#131134 = ORIENTED_EDGE('',*,*,#131135,.T.); +#131135 = EDGE_CURVE('',#131128,#131136,#131138,.T.); +#131136 = VERTEX_POINT('',#131137); +#131137 = CARTESIAN_POINT('',(149.803225,-132.699806,1.585)); +#131138 = LINE('',#131139,#131140); +#131139 = CARTESIAN_POINT('',(149.933333,-132.701247,1.585)); +#131140 = VECTOR('',#131141,1.); +#131141 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#131142 = ORIENTED_EDGE('',*,*,#131143,.T.); +#131143 = EDGE_CURVE('',#131136,#131144,#131146,.T.); +#131144 = VERTEX_POINT('',#131145); +#131145 = CARTESIAN_POINT('',(149.817857,-132.551247,1.585)); +#131146 = CIRCLE('',#131147,7.500006711463E-02); +#131147 = AXIS2_PLACEMENT_3D('',#131148,#131149,#131150); +#131148 = CARTESIAN_POINT('',(149.81785693288,-132.6262470671,1.585)); +#131149 = DIRECTION('',(0.,0.,-1.)); +#131150 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#131151 = ORIENTED_EDGE('',*,*,#131152,.T.); +#131152 = EDGE_CURVE('',#131144,#131153,#131155,.T.); +#131153 = VERTEX_POINT('',#131154); +#131154 = CARTESIAN_POINT('',(150.022965,-132.552688,1.585)); +#131155 = LINE('',#131156,#131157); +#131156 = CARTESIAN_POINT('',(149.817857,-132.551247,1.585)); +#131157 = VECTOR('',#131158,1.); +#131158 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#131159 = ORIENTED_EDGE('',*,*,#131160,.T.); +#131160 = EDGE_CURVE('',#131153,#131161,#131163,.T.); +#131161 = VERTEX_POINT('',#131162); +#131162 = CARTESIAN_POINT('',(150.083333,-132.626247,1.585)); +#131163 = CIRCLE('',#131164,7.500074938985E-02); +#131164 = AXIS2_PLACEMENT_3D('',#131165,#131166,#131167); +#131165 = CARTESIAN_POINT('',(150.00833225061,-132.6262474661,1.585)); +#131166 = DIRECTION('',(0.,0.,-1.)); +#131167 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#131168 = ORIENTED_EDGE('',*,*,#131169,.T.); +#131169 = EDGE_CURVE('',#131161,#131170,#131172,.T.); +#131170 = VERTEX_POINT('',#131171); +#131171 = CARTESIAN_POINT('',(150.081892,-132.974212,1.585)); +#131172 = LINE('',#131173,#131174); +#131173 = CARTESIAN_POINT('',(150.083333,-132.626247,1.585)); +#131174 = VECTOR('',#131175,1.); +#131175 = DIRECTION('',(-4.141185589905E-03,-0.999991425254,0.)); +#131176 = ORIENTED_EDGE('',*,*,#131177,.T.); +#131177 = EDGE_CURVE('',#131170,#131178,#131180,.T.); +#131178 = VERTEX_POINT('',#131179); +#131179 = CARTESIAN_POINT('',(150.061366,-133.012613,1.585)); +#131180 = LINE('',#131181,#131182); +#131181 = CARTESIAN_POINT('',(150.081892,-132.974212,1.585)); +#131182 = VECTOR('',#131183,1.); +#131183 = DIRECTION('',(-0.471400985779,-0.881918993222,0.)); +#131184 = ORIENTED_EDGE('',*,*,#131185,.T.); +#131185 = EDGE_CURVE('',#131178,#131186,#131188,.T.); +#131186 = VERTEX_POINT('',#131187); +#131187 = CARTESIAN_POINT('',(149.997856,-133.072357,1.585)); +#131188 = LINE('',#131189,#131190); +#131189 = CARTESIAN_POINT('',(150.061366,-133.012613,1.585)); +#131190 = VECTOR('',#131191,1.); +#131191 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#131192 = ORIENTED_EDGE('',*,*,#131193,.T.); +#131193 = EDGE_CURVE('',#131186,#131194,#131196,.T.); +#131194 = VERTEX_POINT('',#131195); +#131195 = CARTESIAN_POINT('',(149.538094,-133.069561,1.585)); +#131196 = CIRCLE('',#131197,0.461067828848); +#131197 = AXIS2_PLACEMENT_3D('',#131198,#131199,#131200); +#131198 = CARTESIAN_POINT('',(149.77040551268,-132.6712961335,1.585)); +#131199 = DIRECTION('',(-0.,0.,-1.)); +#131200 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#131201 = ORIENTED_EDGE('',*,*,#131202,.T.); +#131202 = EDGE_CURVE('',#131194,#131203,#131205,.T.); +#131203 = VERTEX_POINT('',#131204); +#131204 = CARTESIAN_POINT('',(149.421405,-132.951798,1.585)); +#131205 = LINE('',#131206,#131207); +#131206 = CARTESIAN_POINT('',(149.538094,-133.069561,1.585)); +#131207 = VECTOR('',#131208,1.); +#131208 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#131209 = ORIENTED_EDGE('',*,*,#131210,.T.); +#131210 = EDGE_CURVE('',#131203,#131211,#131213,.T.); +#131211 = VERTEX_POINT('',#131212); +#131212 = CARTESIAN_POINT('',(149.364144,-132.834913,1.585)); +#131213 = LINE('',#131214,#131215); +#131214 = CARTESIAN_POINT('',(149.421405,-132.951798,1.585)); +#131215 = VECTOR('',#131216,1.); +#131216 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#131217 = ORIENTED_EDGE('',*,*,#131218,.T.); +#131218 = EDGE_CURVE('',#131211,#131219,#131221,.T.); +#131219 = VERTEX_POINT('',#131220); +#131220 = CARTESIAN_POINT('',(149.314286,-132.626247,1.585)); +#131221 = LINE('',#131222,#131223); +#131222 = CARTESIAN_POINT('',(149.364144,-132.834913,1.585)); +#131223 = VECTOR('',#131224,1.); +#131224 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#131225 = ORIENTED_EDGE('',*,*,#131226,.T.); +#131226 = EDGE_CURVE('',#131219,#131227,#131229,.T.); +#131227 = VERTEX_POINT('',#131228); +#131228 = CARTESIAN_POINT('',(149.316525,-132.4652,1.585)); +#131229 = LINE('',#131230,#131231); +#131230 = CARTESIAN_POINT('',(149.314286,-132.626247,1.585)); +#131231 = VECTOR('',#131232,1.); +#131232 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#131233 = ORIENTED_EDGE('',*,*,#131234,.T.); +#131234 = EDGE_CURVE('',#131227,#131235,#131237,.T.); +#131235 = VERTEX_POINT('',#131236); +#131236 = CARTESIAN_POINT('',(149.369823,-132.259373,1.585)); +#131237 = LINE('',#131238,#131239); +#131238 = CARTESIAN_POINT('',(149.316525,-132.4652,1.585)); +#131239 = VECTOR('',#131240,1.); +#131240 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#131241 = ORIENTED_EDGE('',*,*,#131242,.T.); +#131242 = EDGE_CURVE('',#131235,#131003,#131243,.T.); +#131243 = LINE('',#131244,#131245); +#131244 = CARTESIAN_POINT('',(149.369823,-132.259373,1.585)); +#131245 = VECTOR('',#131246,1.); +#131246 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#131247 = PLANE('',#131248); +#131248 = AXIS2_PLACEMENT_3D('',#131249,#131250,#131251); +#131249 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131250 = DIRECTION('',(0.,0.,1.)); +#131251 = DIRECTION('',(1.,0.,-0.)); +#131252 = SHELL_BASED_SURFACE_MODEL('',(#131253)); +#131253 = OPEN_SHELL('',(#131254)); +#131254 = ADVANCED_FACE('',(#131255),#131519,.T.); +#131255 = FACE_BOUND('',#131256,.F.); +#131256 = EDGE_LOOP('',(#131257,#131267,#131275,#131283,#131292,#131300, + #131308,#131317,#131325,#131333,#131341,#131349,#131357,#131365, + #131373,#131382,#131390,#131398,#131406,#131414,#131423,#131431, + #131439,#131448,#131456,#131464,#131472,#131480,#131488,#131496, + #131504,#131513)); +#131257 = ORIENTED_EDGE('',*,*,#131258,.T.); +#131258 = EDGE_CURVE('',#131259,#131261,#131263,.T.); +#131259 = VERTEX_POINT('',#131260); +#131260 = CARTESIAN_POINT('',(146.397064,-132.03932,1.585)); +#131261 = VERTEX_POINT('',#131262); +#131262 = CARTESIAN_POINT('',(146.517511,-131.98126,1.585)); +#131263 = LINE('',#131264,#131265); +#131264 = CARTESIAN_POINT('',(146.397064,-132.03932,1.585)); +#131265 = VECTOR('',#131266,1.); +#131266 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#131267 = ORIENTED_EDGE('',*,*,#131268,.T.); +#131268 = EDGE_CURVE('',#131261,#131269,#131271,.T.); +#131269 = VERTEX_POINT('',#131270); +#131270 = CARTESIAN_POINT('',(146.777643,-131.980548,1.585)); +#131271 = LINE('',#131272,#131273); +#131272 = CARTESIAN_POINT('',(146.517511,-131.98126,1.585)); +#131273 = VECTOR('',#131274,1.); +#131274 = DIRECTION('',(0.99999625424,2.737061695645E-03,0.)); +#131275 = ORIENTED_EDGE('',*,*,#131276,.T.); +#131276 = EDGE_CURVE('',#131269,#131277,#131279,.T.); +#131277 = VERTEX_POINT('',#131278); +#131278 = CARTESIAN_POINT('',(146.950237,-132.037281,1.585)); +#131279 = LINE('',#131280,#131281); +#131280 = CARTESIAN_POINT('',(146.777643,-131.980548,1.585)); +#131281 = VECTOR('',#131282,1.); +#131282 = DIRECTION('',(0.949993312755,-0.312270244693,0.)); +#131283 = ORIENTED_EDGE('',*,*,#131284,.T.); +#131284 = EDGE_CURVE('',#131277,#131285,#131287,.T.); +#131285 = VERTEX_POINT('',#131286); +#131286 = CARTESIAN_POINT('',(146.889377,-132.173589,1.585)); +#131287 = CIRCLE('',#131288,7.499990197503E-02); +#131288 = AXIS2_PLACEMENT_3D('',#131289,#131290,#131291); +#131289 = CARTESIAN_POINT('',(146.91309495478,-132.1024381467,1.585)); +#131290 = DIRECTION('',(0.,0.,-1.)); +#131291 = DIRECTION('',(0.495227916747,0.868763092261,0.)); +#131292 = ORIENTED_EDGE('',*,*,#131293,.T.); +#131293 = EDGE_CURVE('',#131285,#131294,#131296,.T.); +#131294 = VERTEX_POINT('',#131295); +#131295 = CARTESIAN_POINT('',(146.758068,-132.129819,1.585)); +#131296 = LINE('',#131297,#131298); +#131297 = CARTESIAN_POINT('',(146.889377,-132.173589,1.585)); +#131298 = VECTOR('',#131299,1.); +#131299 = DIRECTION('',(-0.948682575567,0.316229933459,0.)); +#131300 = ORIENTED_EDGE('',*,*,#131301,.T.); +#131301 = EDGE_CURVE('',#131294,#131302,#131304,.T.); +#131302 = VERTEX_POINT('',#131303); +#131303 = CARTESIAN_POINT('',(146.549848,-132.129819,1.585)); +#131304 = LINE('',#131305,#131306); +#131305 = CARTESIAN_POINT('',(146.758068,-132.129819,1.585)); +#131306 = VECTOR('',#131307,1.); +#131307 = DIRECTION('',(-1.,0.,0.)); +#131308 = ORIENTED_EDGE('',*,*,#131309,.T.); +#131309 = EDGE_CURVE('',#131302,#131310,#131312,.T.); +#131310 = VERTEX_POINT('',#131311); +#131311 = CARTESIAN_POINT('',(146.416667,-132.263,1.585)); +#131312 = CIRCLE('',#131313,0.18686440374); +#131313 = AXIS2_PLACEMENT_3D('',#131314,#131315,#131316); +#131314 = CARTESIAN_POINT('',(146.597384,-132.310536,1.585)); +#131315 = DIRECTION('',(0.,0.,1.)); +#131316 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#131317 = ORIENTED_EDGE('',*,*,#131318,.T.); +#131318 = EDGE_CURVE('',#131310,#131319,#131321,.T.); +#131319 = VERTEX_POINT('',#131320); +#131320 = CARTESIAN_POINT('',(146.416667,-132.322828,1.585)); +#131321 = LINE('',#131322,#131323); +#131322 = CARTESIAN_POINT('',(146.416667,-132.263,1.585)); +#131323 = VECTOR('',#131324,1.); +#131324 = DIRECTION('',(0.,-1.,0.)); +#131325 = ORIENTED_EDGE('',*,*,#131326,.T.); +#131326 = EDGE_CURVE('',#131319,#131327,#131329,.T.); +#131327 = VERTEX_POINT('',#131328); +#131328 = CARTESIAN_POINT('',(146.450925,-132.391344,1.585)); +#131329 = LINE('',#131330,#131331); +#131330 = CARTESIAN_POINT('',(146.416667,-132.322828,1.585)); +#131331 = VECTOR('',#131332,1.); +#131332 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#131333 = ORIENTED_EDGE('',*,*,#131334,.T.); +#131334 = EDGE_CURVE('',#131327,#131335,#131337,.T.); +#131335 = VERTEX_POINT('',#131336); +#131336 = CARTESIAN_POINT('',(146.481332,-132.421751,1.585)); +#131337 = LINE('',#131338,#131339); +#131338 = CARTESIAN_POINT('',(146.450925,-132.391344,1.585)); +#131339 = VECTOR('',#131340,1.); +#131340 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#131341 = ORIENTED_EDGE('',*,*,#131342,.T.); +#131342 = EDGE_CURVE('',#131335,#131343,#131345,.T.); +#131343 = VERTEX_POINT('',#131344); +#131344 = CARTESIAN_POINT('',(146.558319,-132.460244,1.585)); +#131345 = LINE('',#131346,#131347); +#131346 = CARTESIAN_POINT('',(146.481332,-132.421751,1.585)); +#131347 = VECTOR('',#131348,1.); +#131348 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#131349 = ORIENTED_EDGE('',*,*,#131350,.T.); +#131350 = EDGE_CURVE('',#131343,#131351,#131353,.T.); +#131351 = VERTEX_POINT('',#131352); +#131352 = CARTESIAN_POINT('',(146.75616,-132.511546,1.585)); +#131353 = LINE('',#131354,#131355); +#131354 = CARTESIAN_POINT('',(146.558319,-132.460244,1.585)); +#131355 = VECTOR('',#131356,1.); +#131356 = DIRECTION('',(0.967985143201,-0.251007494991,0.)); +#131357 = ORIENTED_EDGE('',*,*,#131358,.T.); +#131358 = EDGE_CURVE('',#131351,#131359,#131361,.T.); +#131359 = VERTEX_POINT('',#131360); +#131360 = CARTESIAN_POINT('',(146.86514,-132.568495,1.585)); +#131361 = LINE('',#131362,#131363); +#131362 = CARTESIAN_POINT('',(146.75616,-132.511546,1.585)); +#131363 = VECTOR('',#131364,1.); +#131364 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#131365 = ORIENTED_EDGE('',*,*,#131366,.T.); +#131366 = EDGE_CURVE('',#131359,#131367,#131369,.T.); +#131367 = VERTEX_POINT('',#131368); +#131368 = CARTESIAN_POINT('',(146.928593,-132.634025,1.585)); +#131369 = LINE('',#131370,#131371); +#131370 = CARTESIAN_POINT('',(146.86514,-132.568495,1.585)); +#131371 = VECTOR('',#131372,1.); +#131372 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#131373 = ORIENTED_EDGE('',*,*,#131374,.T.); +#131374 = EDGE_CURVE('',#131367,#131375,#131377,.T.); +#131375 = VERTEX_POINT('',#131376); +#131376 = CARTESIAN_POINT('',(146.923227,-133.006863,1.585)); +#131377 = CIRCLE('',#131378,0.290999251663); +#131378 = AXIS2_PLACEMENT_3D('',#131379,#131380,#131381); +#131379 = CARTESIAN_POINT('',(146.7025023369,-132.8172286477,1.585)); +#131380 = DIRECTION('',(0.,0.,-1.)); +#131381 = DIRECTION('',(0.776945857418,0.629567418662,0.)); +#131382 = ORIENTED_EDGE('',*,*,#131383,.T.); +#131383 = EDGE_CURVE('',#131375,#131384,#131386,.T.); +#131384 = VERTEX_POINT('',#131385); +#131385 = CARTESIAN_POINT('',(146.857697,-133.070317,1.585)); +#131386 = LINE('',#131387,#131388); +#131387 = CARTESIAN_POINT('',(146.923227,-133.006863,1.585)); +#131388 = VECTOR('',#131389,1.); +#131389 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#131390 = ORIENTED_EDGE('',*,*,#131391,.T.); +#131391 = EDGE_CURVE('',#131384,#131392,#131394,.T.); +#131392 = VERTEX_POINT('',#131393); +#131393 = CARTESIAN_POINT('',(146.737251,-133.128378,1.585)); +#131394 = LINE('',#131395,#131396); +#131395 = CARTESIAN_POINT('',(146.857697,-133.070317,1.585)); +#131396 = VECTOR('',#131397,1.); +#131397 = DIRECTION('',(-0.900801384651,-0.434231350101,0.)); +#131398 = ORIENTED_EDGE('',*,*,#131399,.T.); +#131399 = EDGE_CURVE('',#131392,#131400,#131402,.T.); +#131400 = VERTEX_POINT('',#131401); +#131401 = CARTESIAN_POINT('',(146.468061,-133.127619,1.585)); +#131402 = LINE('',#131403,#131404); +#131403 = CARTESIAN_POINT('',(146.737251,-133.128378,1.585)); +#131404 = VECTOR('',#131405,1.); +#131405 = DIRECTION('',(-0.999996025037,2.819558612842E-03,0.)); +#131406 = ORIENTED_EDGE('',*,*,#131407,.T.); +#131407 = EDGE_CURVE('',#131400,#131408,#131410,.T.); +#131408 = VERTEX_POINT('',#131409); +#131409 = CARTESIAN_POINT('',(146.304524,-133.072357,1.585)); +#131410 = LINE('',#131411,#131412); +#131411 = CARTESIAN_POINT('',(146.468061,-133.127619,1.585)); +#131412 = VECTOR('',#131413,1.); +#131413 = DIRECTION('',(-0.94737239725,0.320133629801,0.)); +#131414 = ORIENTED_EDGE('',*,*,#131415,.T.); +#131415 = EDGE_CURVE('',#131408,#131416,#131418,.T.); +#131416 = VERTEX_POINT('',#131417); +#131417 = CARTESIAN_POINT('',(146.365384,-132.936049,1.585)); +#131418 = CIRCLE('',#131419,7.500001519552E-02); +#131419 = AXIS2_PLACEMENT_3D('',#131420,#131421,#131422); +#131420 = CARTESIAN_POINT('',(146.34166709996,-133.0072003241,1.585)); +#131421 = DIRECTION('',(0.,0.,-1.)); +#131422 = DIRECTION('',(-0.4952412325,-0.868755501641,-0.)); +#131423 = ORIENTED_EDGE('',*,*,#131424,.T.); +#131424 = EDGE_CURVE('',#131416,#131425,#131427,.T.); +#131425 = VERTEX_POINT('',#131426); +#131426 = CARTESIAN_POINT('',(146.496694,-132.979819,1.585)); +#131427 = LINE('',#131428,#131429); +#131428 = CARTESIAN_POINT('',(146.365384,-132.936049,1.585)); +#131429 = VECTOR('',#131430,1.); +#131430 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#131431 = ORIENTED_EDGE('',*,*,#131432,.T.); +#131432 = EDGE_CURVE('',#131425,#131433,#131435,.T.); +#131433 = VERTEX_POINT('',#131434); +#131434 = CARTESIAN_POINT('',(146.704914,-132.979819,1.585)); +#131435 = LINE('',#131436,#131437); +#131436 = CARTESIAN_POINT('',(146.496694,-132.979819,1.585)); +#131437 = VECTOR('',#131438,1.); +#131438 = DIRECTION('',(1.,0.,0.)); +#131439 = ORIENTED_EDGE('',*,*,#131440,.T.); +#131440 = EDGE_CURVE('',#131433,#131441,#131443,.T.); +#131441 = VERTEX_POINT('',#131442); +#131442 = CARTESIAN_POINT('',(146.838095,-132.846637,1.585)); +#131443 = CIRCLE('',#131444,0.186867760544); +#131444 = AXIS2_PLACEMENT_3D('',#131445,#131446,#131447); +#131445 = CARTESIAN_POINT('',(146.65737496928,-132.7990993262,1.585)); +#131446 = DIRECTION('',(0.,0.,1.)); +#131447 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#131448 = ORIENTED_EDGE('',*,*,#131449,.T.); +#131449 = EDGE_CURVE('',#131441,#131450,#131452,.T.); +#131450 = VERTEX_POINT('',#131451); +#131451 = CARTESIAN_POINT('',(146.838095,-132.786809,1.585)); +#131452 = LINE('',#131453,#131454); +#131453 = CARTESIAN_POINT('',(146.838095,-132.846637,1.585)); +#131454 = VECTOR('',#131455,1.); +#131455 = DIRECTION('',(0.,1.,0.)); +#131456 = ORIENTED_EDGE('',*,*,#131457,.T.); +#131457 = EDGE_CURVE('',#131450,#131458,#131460,.T.); +#131458 = VERTEX_POINT('',#131459); +#131459 = CARTESIAN_POINT('',(146.803837,-132.718293,1.585)); +#131460 = LINE('',#131461,#131462); +#131461 = CARTESIAN_POINT('',(146.838095,-132.786809,1.585)); +#131462 = VECTOR('',#131463,1.); +#131463 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#131464 = ORIENTED_EDGE('',*,*,#131465,.T.); +#131465 = EDGE_CURVE('',#131458,#131466,#131468,.T.); +#131466 = VERTEX_POINT('',#131467); +#131467 = CARTESIAN_POINT('',(146.77343,-132.687886,1.585)); +#131468 = LINE('',#131469,#131470); +#131469 = CARTESIAN_POINT('',(146.803837,-132.718293,1.585)); +#131470 = VECTOR('',#131471,1.); +#131471 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#131472 = ORIENTED_EDGE('',*,*,#131473,.T.); +#131473 = EDGE_CURVE('',#131466,#131474,#131476,.T.); +#131474 = VERTEX_POINT('',#131475); +#131475 = CARTESIAN_POINT('',(146.696443,-132.649392,1.585)); +#131476 = LINE('',#131477,#131478); +#131477 = CARTESIAN_POINT('',(146.77343,-132.687886,1.585)); +#131478 = VECTOR('',#131479,1.); +#131479 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#131480 = ORIENTED_EDGE('',*,*,#131481,.T.); +#131481 = EDGE_CURVE('',#131474,#131482,#131484,.T.); +#131482 = VERTEX_POINT('',#131483); +#131483 = CARTESIAN_POINT('',(146.498602,-132.598091,1.585)); +#131484 = LINE('',#131485,#131486); +#131485 = CARTESIAN_POINT('',(146.696443,-132.649392,1.585)); +#131486 = VECTOR('',#131487,1.); +#131487 = DIRECTION('',(-0.967986331989,0.251002910506,0.)); +#131488 = ORIENTED_EDGE('',*,*,#131489,.T.); +#131489 = EDGE_CURVE('',#131482,#131490,#131492,.T.); +#131490 = VERTEX_POINT('',#131491); +#131491 = CARTESIAN_POINT('',(146.389621,-132.541141,1.585)); +#131492 = LINE('',#131493,#131494); +#131493 = CARTESIAN_POINT('',(146.498602,-132.598091,1.585)); +#131494 = VECTOR('',#131495,1.); +#131495 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#131496 = ORIENTED_EDGE('',*,*,#131497,.T.); +#131497 = EDGE_CURVE('',#131490,#131498,#131500,.T.); +#131498 = VERTEX_POINT('',#131499); +#131499 = CARTESIAN_POINT('',(146.326168,-132.475611,1.585)); +#131500 = LINE('',#131501,#131502); +#131501 = CARTESIAN_POINT('',(146.389621,-132.541141,1.585)); +#131502 = VECTOR('',#131503,1.); +#131503 = DIRECTION('',(-0.695630129574,0.718400113328,0.)); +#131504 = ORIENTED_EDGE('',*,*,#131505,.T.); +#131505 = EDGE_CURVE('',#131498,#131506,#131508,.T.); +#131506 = VERTEX_POINT('',#131507); +#131507 = CARTESIAN_POINT('',(146.331534,-132.102773,1.585)); +#131508 = CIRCLE('',#131509,0.291002094877); +#131509 = AXIS2_PLACEMENT_3D('',#131510,#131511,#131512); +#131510 = CARTESIAN_POINT('',(146.55226236573,-132.2924074055,1.585)); +#131511 = DIRECTION('',(0.,0.,-1.)); +#131512 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#131513 = ORIENTED_EDGE('',*,*,#131514,.T.); +#131514 = EDGE_CURVE('',#131506,#131259,#131515,.T.); +#131515 = LINE('',#131516,#131517); +#131516 = CARTESIAN_POINT('',(146.331534,-132.102773,1.585)); +#131517 = VECTOR('',#131518,1.); +#131518 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#131519 = PLANE('',#131520); +#131520 = AXIS2_PLACEMENT_3D('',#131521,#131522,#131523); +#131521 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131522 = DIRECTION('',(0.,0.,1.)); +#131523 = DIRECTION('',(1.,0.,-0.)); +#131524 = SHELL_BASED_SURFACE_MODEL('',(#131525)); +#131525 = OPEN_SHELL('',(#131526)); +#131526 = ADVANCED_FACE('',(#131527),#131662,.T.); +#131527 = FACE_BOUND('',#131528,.F.); +#131528 = EDGE_LOOP('',(#131529,#131540,#131548,#131556,#131564,#131573, + #131581,#131589,#131598,#131606,#131614,#131623,#131631,#131639, + #131648,#131656)); +#131529 = ORIENTED_EDGE('',*,*,#131530,.T.); +#131530 = EDGE_CURVE('',#131531,#131533,#131535,.T.); +#131531 = VERTEX_POINT('',#131532); +#131532 = CARTESIAN_POINT('',(148.629017,-131.947951,1.585)); +#131533 = VERTEX_POINT('',#131534); +#131534 = CARTESIAN_POINT('',(148.746151,-132.030918,1.585)); +#131535 = CIRCLE('',#131536,7.499955990673E-02); +#131536 = AXIS2_PLACEMENT_3D('',#131537,#131538,#131539); +#131537 = CARTESIAN_POINT('',(148.67500050095,-132.0072000643,1.585)); +#131538 = DIRECTION('',(0.,0.,-1.)); +#131539 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#131540 = ORIENTED_EDGE('',*,*,#131541,.T.); +#131541 = EDGE_CURVE('',#131533,#131542,#131544,.T.); +#131542 = VERTEX_POINT('',#131543); +#131543 = CARTESIAN_POINT('',(148.540962,-132.646485,1.585)); +#131544 = LINE('',#131545,#131546); +#131545 = CARTESIAN_POINT('',(148.746151,-132.030918,1.585)); +#131546 = VECTOR('',#131547,1.); +#131547 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#131548 = ORIENTED_EDGE('',*,*,#131549,.T.); +#131549 = EDGE_CURVE('',#131542,#131550,#131552,.T.); +#131550 = VERTEX_POINT('',#131551); +#131551 = CARTESIAN_POINT('',(148.838095,-132.646485,1.585)); +#131552 = LINE('',#131553,#131554); +#131553 = CARTESIAN_POINT('',(148.540962,-132.646485,1.585)); +#131554 = VECTOR('',#131555,1.); +#131555 = DIRECTION('',(1.,0.,0.)); +#131556 = ORIENTED_EDGE('',*,*,#131557,.T.); +#131557 = EDGE_CURVE('',#131550,#131558,#131560,.T.); +#131558 = VERTEX_POINT('',#131559); +#131559 = CARTESIAN_POINT('',(148.839536,-132.37352,1.585)); +#131560 = LINE('',#131561,#131562); +#131561 = CARTESIAN_POINT('',(148.838095,-132.646485,1.585)); +#131562 = VECTOR('',#131563,1.); +#131563 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#131564 = ORIENTED_EDGE('',*,*,#131565,.T.); +#131565 = EDGE_CURVE('',#131558,#131566,#131568,.T.); +#131566 = VERTEX_POINT('',#131567); +#131567 = CARTESIAN_POINT('',(148.988095,-132.388152,1.585)); +#131568 = CIRCLE('',#131569,7.500006711463E-02); +#131569 = AXIS2_PLACEMENT_3D('',#131570,#131571,#131572); +#131570 = CARTESIAN_POINT('',(148.91309493288,-132.3881519328,1.585)); +#131571 = DIRECTION('',(0.,0.,-1.)); +#131572 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#131573 = ORIENTED_EDGE('',*,*,#131574,.T.); +#131574 = EDGE_CURVE('',#131566,#131575,#131577,.T.); +#131575 = VERTEX_POINT('',#131576); +#131576 = CARTESIAN_POINT('',(148.988095,-132.646485,1.585)); +#131577 = LINE('',#131578,#131579); +#131578 = CARTESIAN_POINT('',(148.988095,-132.388152,1.585)); +#131579 = VECTOR('',#131580,1.); +#131580 = DIRECTION('',(0.,-1.,0.)); +#131581 = ORIENTED_EDGE('',*,*,#131582,.T.); +#131582 = EDGE_CURVE('',#131575,#131583,#131585,.T.); +#131583 = VERTEX_POINT('',#131584); +#131584 = CARTESIAN_POINT('',(149.070584,-132.647926,1.585)); +#131585 = LINE('',#131586,#131587); +#131586 = CARTESIAN_POINT('',(148.988095,-132.646485,1.585)); +#131587 = VECTOR('',#131588,1.); +#131588 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#131589 = ORIENTED_EDGE('',*,*,#131590,.T.); +#131590 = EDGE_CURVE('',#131583,#131591,#131593,.T.); +#131591 = VERTEX_POINT('',#131592); +#131592 = CARTESIAN_POINT('',(149.055952,-132.796485,1.585)); +#131593 = CIRCLE('',#131594,7.500006711462E-02); +#131594 = AXIS2_PLACEMENT_3D('',#131595,#131596,#131597); +#131595 = CARTESIAN_POINT('',(149.05595206711,-132.7214849328,1.585)); +#131596 = DIRECTION('',(0.,0.,-1.)); +#131597 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#131598 = ORIENTED_EDGE('',*,*,#131599,.T.); +#131599 = EDGE_CURVE('',#131591,#131600,#131602,.T.); +#131600 = VERTEX_POINT('',#131601); +#131601 = CARTESIAN_POINT('',(148.988095,-132.796485,1.585)); +#131602 = LINE('',#131603,#131604); +#131603 = CARTESIAN_POINT('',(149.055952,-132.796485,1.585)); +#131604 = VECTOR('',#131605,1.); +#131605 = DIRECTION('',(-1.,0.,0.)); +#131606 = ORIENTED_EDGE('',*,*,#131607,.T.); +#131607 = EDGE_CURVE('',#131600,#131608,#131610,.T.); +#131608 = VERTEX_POINT('',#131609); +#131609 = CARTESIAN_POINT('',(148.986654,-133.069451,1.585)); +#131610 = LINE('',#131611,#131612); +#131611 = CARTESIAN_POINT('',(148.988095,-132.796485,1.585)); +#131612 = VECTOR('',#131613,1.); +#131613 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#131614 = ORIENTED_EDGE('',*,*,#131615,.T.); +#131615 = EDGE_CURVE('',#131608,#131616,#131618,.T.); +#131616 = VERTEX_POINT('',#131617); +#131617 = CARTESIAN_POINT('',(148.838095,-133.054819,1.585)); +#131618 = CIRCLE('',#131619,7.500006711463E-02); +#131619 = AXIS2_PLACEMENT_3D('',#131620,#131621,#131622); +#131620 = CARTESIAN_POINT('',(148.91309506711,-133.0548190671,1.585)); +#131621 = DIRECTION('',(-0.,0.,-1.)); +#131622 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#131623 = ORIENTED_EDGE('',*,*,#131624,.T.); +#131624 = EDGE_CURVE('',#131616,#131625,#131627,.T.); +#131625 = VERTEX_POINT('',#131626); +#131626 = CARTESIAN_POINT('',(148.838095,-132.796485,1.585)); +#131627 = LINE('',#131628,#131629); +#131628 = CARTESIAN_POINT('',(148.838095,-133.054819,1.585)); +#131629 = VECTOR('',#131630,1.); +#131630 = DIRECTION('',(0.,1.,0.)); +#131631 = ORIENTED_EDGE('',*,*,#131632,.T.); +#131632 = EDGE_CURVE('',#131625,#131633,#131635,.T.); +#131633 = VERTEX_POINT('',#131634); +#131634 = CARTESIAN_POINT('',(148.422273,-132.795044,1.585)); +#131635 = LINE('',#131636,#131637); +#131636 = CARTESIAN_POINT('',(148.838095,-132.796485,1.585)); +#131637 = VECTOR('',#131638,1.); +#131638 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#131639 = ORIENTED_EDGE('',*,*,#131640,.T.); +#131640 = EDGE_CURVE('',#131633,#131641,#131643,.T.); +#131641 = VERTEX_POINT('',#131642); +#131642 = CARTESIAN_POINT('',(148.365754,-132.697768,1.585)); +#131643 = CIRCLE('',#131644,7.499997045038E-02); +#131644 = AXIS2_PLACEMENT_3D('',#131645,#131646,#131647); +#131645 = CARTESIAN_POINT('',(148.43690517257,-132.7214852133,1.585)); +#131646 = DIRECTION('',(0.,0.,-1.)); +#131647 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#131648 = ORIENTED_EDGE('',*,*,#131649,.T.); +#131649 = EDGE_CURVE('',#131641,#131650,#131652,.T.); +#131650 = VERTEX_POINT('',#131651); +#131651 = CARTESIAN_POINT('',(148.609843,-131.970058,1.585)); +#131652 = LINE('',#131653,#131654); +#131653 = CARTESIAN_POINT('',(148.365754,-132.697768,1.585)); +#131654 = VECTOR('',#131655,1.); +#131655 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#131656 = ORIENTED_EDGE('',*,*,#131657,.T.); +#131657 = EDGE_CURVE('',#131650,#131531,#131658,.T.); +#131658 = LINE('',#131659,#131660); +#131659 = CARTESIAN_POINT('',(148.609843,-131.970058,1.585)); +#131660 = VECTOR('',#131661,1.); +#131661 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#131662 = PLANE('',#131663); +#131663 = AXIS2_PLACEMENT_3D('',#131664,#131665,#131666); +#131664 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131665 = DIRECTION('',(0.,0.,1.)); +#131666 = DIRECTION('',(1.,0.,-0.)); +#131667 = SHELL_BASED_SURFACE_MODEL('',(#131668)); +#131668 = OPEN_SHELL('',(#131669)); +#131669 = ADVANCED_FACE('',(#131670),#131714,.T.); +#131670 = FACE_BOUND('',#131671,.F.); +#131671 = EDGE_LOOP('',(#131672,#131683,#131691,#131700,#131708)); +#131672 = ORIENTED_EDGE('',*,*,#131673,.T.); +#131673 = EDGE_CURVE('',#131674,#131676,#131678,.T.); +#131674 = VERTEX_POINT('',#131675); +#131675 = CARTESIAN_POINT('',(159.499567,-131.802039,1.585)); +#131676 = VERTEX_POINT('',#131677); +#131677 = CARTESIAN_POINT('',(159.615,-131.825,1.585)); +#131678 = CIRCLE('',#131679,6.000007318646E-02); +#131679 = AXIS2_PLACEMENT_3D('',#131680,#131681,#131682); +#131680 = CARTESIAN_POINT('',(159.55499992681,-131.8249998233,1.585)); +#131681 = DIRECTION('',(0.,0.,-1.)); +#131682 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#131683 = ORIENTED_EDGE('',*,*,#131684,.T.); +#131684 = EDGE_CURVE('',#131676,#131685,#131687,.T.); +#131685 = VERTEX_POINT('',#131686); +#131686 = CARTESIAN_POINT('',(159.615,-132.725,1.585)); +#131687 = LINE('',#131688,#131689); +#131688 = CARTESIAN_POINT('',(159.615,-131.825,1.585)); +#131689 = VECTOR('',#131690,1.); +#131690 = DIRECTION('',(0.,-1.,0.)); +#131691 = ORIENTED_EDGE('',*,*,#131692,.T.); +#131692 = EDGE_CURVE('',#131685,#131693,#131695,.T.); +#131693 = VERTEX_POINT('',#131694); +#131694 = CARTESIAN_POINT('',(159.495,-132.725,1.585)); +#131695 = CIRCLE('',#131696,6.000000000043E-02); +#131696 = AXIS2_PLACEMENT_3D('',#131697,#131698,#131699); +#131697 = CARTESIAN_POINT('',(159.555,-132.7250002255,1.585)); +#131698 = DIRECTION('',(0.,0.,-1.)); +#131699 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#131700 = ORIENTED_EDGE('',*,*,#131701,.T.); +#131701 = EDGE_CURVE('',#131693,#131702,#131704,.T.); +#131702 = VERTEX_POINT('',#131703); +#131703 = CARTESIAN_POINT('',(159.495,-131.825,1.585)); +#131704 = LINE('',#131705,#131706); +#131705 = CARTESIAN_POINT('',(159.495,-132.725,1.585)); +#131706 = VECTOR('',#131707,1.); +#131707 = DIRECTION('',(0.,1.,0.)); +#131708 = ORIENTED_EDGE('',*,*,#131709,.T.); +#131709 = EDGE_CURVE('',#131702,#131674,#131710,.T.); +#131710 = LINE('',#131711,#131712); +#131711 = CARTESIAN_POINT('',(159.495,-131.825,1.585)); +#131712 = VECTOR('',#131713,1.); +#131713 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#131714 = PLANE('',#131715); +#131715 = AXIS2_PLACEMENT_3D('',#131716,#131717,#131718); +#131716 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131717 = DIRECTION('',(0.,0.,1.)); +#131718 = DIRECTION('',(1.,0.,-0.)); +#131719 = SHELL_BASED_SURFACE_MODEL('',(#131720)); +#131720 = OPEN_SHELL('',(#131721)); +#131721 = ADVANCED_FACE('',(#131722),#131766,.T.); +#131722 = FACE_BOUND('',#131723,.F.); +#131723 = EDGE_LOOP('',(#131724,#131735,#131743,#131752,#131760)); +#131724 = ORIENTED_EDGE('',*,*,#131725,.T.); +#131725 = EDGE_CURVE('',#131726,#131728,#131730,.T.); +#131726 = VERTEX_POINT('',#131727); +#131727 = CARTESIAN_POINT('',(168.689567,-131.802039,1.585)); +#131728 = VERTEX_POINT('',#131729); +#131729 = CARTESIAN_POINT('',(168.805,-131.825,1.585)); +#131730 = CIRCLE('',#131731,6.000007318647E-02); +#131731 = AXIS2_PLACEMENT_3D('',#131732,#131733,#131734); +#131732 = CARTESIAN_POINT('',(168.74499992681,-131.8249998233,1.585)); +#131733 = DIRECTION('',(0.,0.,-1.)); +#131734 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#131735 = ORIENTED_EDGE('',*,*,#131736,.T.); +#131736 = EDGE_CURVE('',#131728,#131737,#131739,.T.); +#131737 = VERTEX_POINT('',#131738); +#131738 = CARTESIAN_POINT('',(168.805,-132.725,1.585)); +#131739 = LINE('',#131740,#131741); +#131740 = CARTESIAN_POINT('',(168.805,-131.825,1.585)); +#131741 = VECTOR('',#131742,1.); +#131742 = DIRECTION('',(0.,-1.,0.)); +#131743 = ORIENTED_EDGE('',*,*,#131744,.T.); +#131744 = EDGE_CURVE('',#131737,#131745,#131747,.T.); +#131745 = VERTEX_POINT('',#131746); +#131746 = CARTESIAN_POINT('',(168.685,-132.725,1.585)); +#131747 = CIRCLE('',#131748,6.000000000042E-02); +#131748 = AXIS2_PLACEMENT_3D('',#131749,#131750,#131751); +#131749 = CARTESIAN_POINT('',(168.745,-132.7250002255,1.585)); +#131750 = DIRECTION('',(0.,0.,-1.)); +#131751 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#131752 = ORIENTED_EDGE('',*,*,#131753,.T.); +#131753 = EDGE_CURVE('',#131745,#131754,#131756,.T.); +#131754 = VERTEX_POINT('',#131755); +#131755 = CARTESIAN_POINT('',(168.685,-131.825,1.585)); +#131756 = LINE('',#131757,#131758); +#131757 = CARTESIAN_POINT('',(168.685,-132.725,1.585)); +#131758 = VECTOR('',#131759,1.); +#131759 = DIRECTION('',(0.,1.,0.)); +#131760 = ORIENTED_EDGE('',*,*,#131761,.T.); +#131761 = EDGE_CURVE('',#131754,#131726,#131762,.T.); +#131762 = LINE('',#131763,#131764); +#131763 = CARTESIAN_POINT('',(168.685,-131.825,1.585)); +#131764 = VECTOR('',#131765,1.); +#131765 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#131766 = PLANE('',#131767); +#131767 = AXIS2_PLACEMENT_3D('',#131768,#131769,#131770); +#131768 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131769 = DIRECTION('',(0.,0.,1.)); +#131770 = DIRECTION('',(1.,0.,-0.)); +#131771 = SHELL_BASED_SURFACE_MODEL('',(#131772)); +#131772 = OPEN_SHELL('',(#131773)); +#131773 = ADVANCED_FACE('',(#131774),#131960,.T.); +#131774 = FACE_BOUND('',#131775,.F.); +#131775 = EDGE_LOOP('',(#131776,#131787,#131795,#131803,#131811,#131819, + #131828,#131836,#131845,#131853,#131862,#131870,#131879,#131887, + #131895,#131903,#131912,#131920,#131928,#131937,#131945,#131954)); +#131776 = ORIENTED_EDGE('',*,*,#131777,.T.); +#131777 = EDGE_CURVE('',#131778,#131780,#131782,.T.); +#131778 = VERTEX_POINT('',#131779); +#131779 = CARTESIAN_POINT('',(117.580369,-132.313914,1.585)); +#131780 = VERTEX_POINT('',#131781); +#131781 = CARTESIAN_POINT('',(117.799225,-132.095057,1.585)); +#131782 = CIRCLE('',#131783,0.308109459502); +#131783 = AXIS2_PLACEMENT_3D('',#131784,#131785,#131786); +#131784 = CARTESIAN_POINT('',(117.87818845359,-132.3928760927,1.585)); +#131785 = DIRECTION('',(0.,0.,-1.)); +#131786 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#131787 = ORIENTED_EDGE('',*,*,#131788,.T.); +#131788 = EDGE_CURVE('',#131780,#131789,#131791,.T.); +#131789 = VERTEX_POINT('',#131790); +#131790 = CARTESIAN_POINT('',(118.031361,-132.092777,1.585)); +#131791 = LINE('',#131792,#131793); +#131792 = CARTESIAN_POINT('',(117.799225,-132.095057,1.585)); +#131793 = VECTOR('',#131794,1.); +#131794 = DIRECTION('',(0.999951769331,9.821354869817E-03,0.)); +#131795 = ORIENTED_EDGE('',*,*,#131796,.T.); +#131796 = EDGE_CURVE('',#131789,#131797,#131799,.T.); +#131797 = VERTEX_POINT('',#131798); +#131798 = CARTESIAN_POINT('',(118.057237,-132.099004,1.585)); +#131799 = LINE('',#131800,#131801); +#131800 = CARTESIAN_POINT('',(118.031361,-132.092777,1.585)); +#131801 = VECTOR('',#131802,1.); +#131802 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#131803 = ORIENTED_EDGE('',*,*,#131804,.T.); +#131804 = EDGE_CURVE('',#131797,#131805,#131807,.T.); +#131805 = VERTEX_POINT('',#131806); +#131806 = CARTESIAN_POINT('',(118.159844,-132.154037,1.585)); +#131807 = LINE('',#131808,#131809); +#131808 = CARTESIAN_POINT('',(118.057237,-132.099004,1.585)); +#131809 = VECTOR('',#131810,1.); +#131810 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#131811 = ORIENTED_EDGE('',*,*,#131812,.T.); +#131812 = EDGE_CURVE('',#131805,#131813,#131815,.T.); +#131813 = VERTEX_POINT('',#131814); +#131814 = CARTESIAN_POINT('',(118.214878,-132.213788,1.585)); +#131815 = LINE('',#131816,#131817); +#131816 = CARTESIAN_POINT('',(118.159844,-132.154037,1.585)); +#131817 = VECTOR('',#131818,1.); +#131818 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#131819 = ORIENTED_EDGE('',*,*,#131820,.T.); +#131820 = EDGE_CURVE('',#131813,#131821,#131823,.T.); +#131821 = VERTEX_POINT('',#131822); +#131822 = CARTESIAN_POINT('',(118.208491,-132.708725,1.585)); +#131823 = CIRCLE('',#131824,0.457783772261); +#131824 = AXIS2_PLACEMENT_3D('',#131825,#131826,#131827); +#131825 = CARTESIAN_POINT('',(117.82659953493,-132.4562871045,1.585)); +#131826 = DIRECTION('',(0.,0.,-1.)); +#131827 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#131828 = ORIENTED_EDGE('',*,*,#131829,.T.); +#131829 = EDGE_CURVE('',#131821,#131830,#131832,.T.); +#131830 = VERTEX_POINT('',#131831); +#131831 = CARTESIAN_POINT('',(118.159843,-132.760247,1.585)); +#131832 = LINE('',#131833,#131834); +#131833 = CARTESIAN_POINT('',(118.208491,-132.708725,1.585)); +#131834 = VECTOR('',#131835,1.); +#131835 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#131836 = ORIENTED_EDGE('',*,*,#131837,.T.); +#131837 = EDGE_CURVE('',#131830,#131838,#131840,.T.); +#131838 = VERTEX_POINT('',#131839); +#131839 = CARTESIAN_POINT('',(118.067921,-132.668323,1.585)); +#131840 = CIRCLE('',#131841,6.499937665136E-02); +#131841 = AXIS2_PLACEMENT_3D('',#131842,#131843,#131844); +#131842 = CARTESIAN_POINT('',(118.11388218097,-132.714284819,1.585)); +#131843 = DIRECTION('',(-0.,0.,-1.)); +#131844 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#131845 = ORIENTED_EDGE('',*,*,#131846,.T.); +#131846 = EDGE_CURVE('',#131838,#131847,#131849,.T.); +#131847 = VERTEX_POINT('',#131848); +#131848 = CARTESIAN_POINT('',(118.103319,-132.632925,1.585)); +#131849 = LINE('',#131850,#131851); +#131850 = CARTESIAN_POINT('',(118.067921,-132.668323,1.585)); +#131851 = VECTOR('',#131852,1.); +#131852 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#131853 = ORIENTED_EDGE('',*,*,#131854,.T.); +#131854 = EDGE_CURVE('',#131847,#131855,#131857,.T.); +#131855 = VERTEX_POINT('',#131856); +#131856 = CARTESIAN_POINT('',(118.103319,-132.28136,1.585)); +#131857 = CIRCLE('',#131858,0.325008683278); +#131858 = AXIS2_PLACEMENT_3D('',#131859,#131860,#131861); +#131859 = CARTESIAN_POINT('',(117.829949,-132.4571425,1.585)); +#131860 = DIRECTION('',(0.,-0.,1.)); +#131861 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#131862 = ORIENTED_EDGE('',*,*,#131863,.T.); +#131863 = EDGE_CURVE('',#131855,#131864,#131866,.T.); +#131864 = VERTEX_POINT('',#131865); +#131865 = CARTESIAN_POINT('',(118.075379,-132.25342,1.585)); +#131866 = LINE('',#131867,#131868); +#131867 = CARTESIAN_POINT('',(118.103319,-132.28136,1.585)); +#131868 = VECTOR('',#131869,1.); +#131869 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#131870 = ORIENTED_EDGE('',*,*,#131871,.T.); +#131871 = EDGE_CURVE('',#131864,#131872,#131874,.T.); +#131872 = VERTEX_POINT('',#131873); +#131873 = CARTESIAN_POINT('',(117.766671,-132.25342,1.585)); +#131874 = CIRCLE('',#131875,0.277419178293); +#131875 = AXIS2_PLACEMENT_3D('',#131876,#131877,#131878); +#131876 = CARTESIAN_POINT('',(117.921025,-132.483933,1.585)); +#131877 = DIRECTION('',(0.,0.,1.)); +#131878 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#131879 = ORIENTED_EDGE('',*,*,#131880,.T.); +#131880 = EDGE_CURVE('',#131872,#131881,#131883,.T.); +#131881 = VERTEX_POINT('',#131882); +#131882 = CARTESIAN_POINT('',(117.738733,-132.281358,1.585)); +#131883 = LINE('',#131884,#131885); +#131884 = CARTESIAN_POINT('',(117.766671,-132.25342,1.585)); +#131885 = VECTOR('',#131886,1.); +#131886 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#131887 = ORIENTED_EDGE('',*,*,#131888,.T.); +#131888 = EDGE_CURVE('',#131881,#131889,#131891,.T.); +#131889 = VERTEX_POINT('',#131890); +#131890 = CARTESIAN_POINT('',(117.707454,-132.343916,1.585)); +#131891 = LINE('',#131892,#131893); +#131892 = CARTESIAN_POINT('',(117.738733,-132.281358,1.585)); +#131893 = VECTOR('',#131894,1.); +#131894 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#131895 = ORIENTED_EDGE('',*,*,#131896,.T.); +#131896 = EDGE_CURVE('',#131889,#131897,#131899,.T.); +#131897 = VERTEX_POINT('',#131898); +#131898 = CARTESIAN_POINT('',(117.707454,-132.457142,1.585)); +#131899 = LINE('',#131900,#131901); +#131900 = CARTESIAN_POINT('',(117.707454,-132.343916,1.585)); +#131901 = VECTOR('',#131902,1.); +#131902 = DIRECTION('',(0.,-1.,0.)); +#131903 = ORIENTED_EDGE('',*,*,#131904,.T.); +#131904 = EDGE_CURVE('',#131897,#131905,#131907,.T.); +#131905 = VERTEX_POINT('',#131906); +#131906 = CARTESIAN_POINT('',(117.599652,-132.50606,1.585)); +#131907 = CIRCLE('',#131908,6.500010429713E-02); +#131908 = AXIS2_PLACEMENT_3D('',#131909,#131910,#131911); +#131909 = CARTESIAN_POINT('',(117.6424538957,-132.4571415854,1.585)); +#131910 = DIRECTION('',(-0.,0.,-1.)); +#131911 = DIRECTION('',(0.99999999998,-6.377789005542E-06,-0.)); +#131912 = ORIENTED_EDGE('',*,*,#131913,.T.); +#131913 = EDGE_CURVE('',#131905,#131914,#131916,.T.); +#131914 = VERTEX_POINT('',#131915); +#131915 = CARTESIAN_POINT('',(117.364597,-132.300386,1.585)); +#131916 = LINE('',#131917,#131918); +#131917 = CARTESIAN_POINT('',(117.599652,-132.50606,1.585)); +#131918 = VECTOR('',#131919,1.); +#131919 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#131920 = ORIENTED_EDGE('',*,*,#131921,.T.); +#131921 = EDGE_CURVE('',#131914,#131922,#131924,.T.); +#131922 = VERTEX_POINT('',#131923); +#131923 = CARTESIAN_POINT('',(117.364597,-132.714285,1.585)); +#131924 = LINE('',#131925,#131926); +#131925 = CARTESIAN_POINT('',(117.364597,-132.300386,1.585)); +#131926 = VECTOR('',#131927,1.); +#131927 = DIRECTION('',(0.,-1.,0.)); +#131928 = ORIENTED_EDGE('',*,*,#131929,.T.); +#131929 = EDGE_CURVE('',#131922,#131930,#131932,.T.); +#131930 = VERTEX_POINT('',#131931); +#131931 = CARTESIAN_POINT('',(117.234597,-132.714285,1.585)); +#131932 = CIRCLE('',#131933,6.500000000093E-02); +#131933 = AXIS2_PLACEMENT_3D('',#131934,#131935,#131936); +#131934 = CARTESIAN_POINT('',(117.299597,-132.7142846551,1.585)); +#131935 = DIRECTION('',(-0.,0.,-1.)); +#131936 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#131937 = ORIENTED_EDGE('',*,*,#131938,.T.); +#131938 = EDGE_CURVE('',#131930,#131939,#131941,.T.); +#131939 = VERTEX_POINT('',#131940); +#131940 = CARTESIAN_POINT('',(117.234597,-132.157142,1.585)); +#131941 = LINE('',#131942,#131943); +#131942 = CARTESIAN_POINT('',(117.234597,-132.714285,1.585)); +#131943 = VECTOR('',#131944,1.); +#131944 = DIRECTION('',(0.,1.,0.)); +#131945 = ORIENTED_EDGE('',*,*,#131946,.T.); +#131946 = EDGE_CURVE('',#131939,#131947,#131949,.T.); +#131947 = VERTEX_POINT('',#131948); +#131948 = CARTESIAN_POINT('',(117.3424,-132.108225,1.585)); +#131949 = CIRCLE('',#131950,6.500002288385E-02); +#131950 = AXIS2_PLACEMENT_3D('',#131951,#131952,#131953); +#131951 = CARTESIAN_POINT('',(117.29959702288,-132.1571423601,1.585)); +#131952 = DIRECTION('',(0.,0.,-1.)); +#131953 = DIRECTION('',(-0.999999999985,5.540887697237E-06,0.)); +#131954 = ORIENTED_EDGE('',*,*,#131955,.T.); +#131955 = EDGE_CURVE('',#131947,#131778,#131956,.T.); +#131956 = LINE('',#131957,#131958); +#131957 = CARTESIAN_POINT('',(117.3424,-132.108225,1.585)); +#131958 = VECTOR('',#131959,1.); +#131959 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#131960 = PLANE('',#131961); +#131961 = AXIS2_PLACEMENT_3D('',#131962,#131963,#131964); +#131962 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131963 = DIRECTION('',(0.,0.,1.)); +#131964 = DIRECTION('',(1.,0.,-0.)); +#131965 = SHELL_BASED_SURFACE_MODEL('',(#131966)); +#131966 = OPEN_SHELL('',(#131967)); +#131967 = ADVANCED_FACE('',(#131968),#132054,.T.); +#131968 = FACE_BOUND('',#131969,.F.); +#131969 = EDGE_LOOP('',(#131970,#131981,#131989,#131998,#132006,#132014, + #132023,#132031,#132040,#132048)); +#131970 = ORIENTED_EDGE('',*,*,#131971,.T.); +#131971 = EDGE_CURVE('',#131972,#131974,#131976,.T.); +#131972 = VERTEX_POINT('',#131973); +#131973 = CARTESIAN_POINT('',(127.459597,-132.007856,1.585)); +#131974 = VERTEX_POINT('',#131975); +#131975 = CARTESIAN_POINT('',(127.459597,-131.877856,1.585)); +#131976 = CIRCLE('',#131977,6.500000000092E-02); +#131977 = AXIS2_PLACEMENT_3D('',#131978,#131979,#131980); +#131978 = CARTESIAN_POINT('',(127.45959734486,-131.942856,1.585)); +#131979 = DIRECTION('',(0.,0.,-1.)); +#131980 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#131981 = ORIENTED_EDGE('',*,*,#131982,.T.); +#131982 = EDGE_CURVE('',#131974,#131983,#131985,.T.); +#131983 = VERTEX_POINT('',#131984); +#131984 = CARTESIAN_POINT('',(128.359597,-131.877856,1.585)); +#131985 = LINE('',#131986,#131987); +#131986 = CARTESIAN_POINT('',(127.459597,-131.877856,1.585)); +#131987 = VECTOR('',#131988,1.); +#131988 = DIRECTION('',(1.,0.,0.)); +#131989 = ORIENTED_EDGE('',*,*,#131990,.T.); +#131990 = EDGE_CURVE('',#131983,#131991,#131993,.T.); +#131991 = VERTEX_POINT('',#131992); +#131992 = CARTESIAN_POINT('',(128.391846,-131.999292,1.585)); +#131993 = CIRCLE('',#131994,6.500021194141E-02); +#131994 = AXIS2_PLACEMENT_3D('',#131995,#131996,#131997); +#131995 = CARTESIAN_POINT('',(128.35959651351,-131.9428562119,1.585)); +#131996 = DIRECTION('',(0.,0.,-1.)); +#131997 = DIRECTION('',(7.484332552717E-06,0.999999999972,0.)); +#131998 = ORIENTED_EDGE('',*,*,#131999,.T.); +#131999 = EDGE_CURVE('',#131991,#132000,#132002,.T.); +#132000 = VERTEX_POINT('',#132001); +#132001 = CARTESIAN_POINT('',(127.704359,-132.392142,1.585)); +#132002 = LINE('',#132003,#132004); +#132003 = CARTESIAN_POINT('',(128.391846,-131.999292,1.585)); +#132004 = VECTOR('',#132005,1.); +#132005 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#132006 = ORIENTED_EDGE('',*,*,#132007,.T.); +#132007 = EDGE_CURVE('',#132000,#132008,#132010,.T.); +#132008 = VERTEX_POINT('',#132009); +#132009 = CARTESIAN_POINT('',(128.359597,-132.392142,1.585)); +#132010 = LINE('',#132011,#132012); +#132011 = CARTESIAN_POINT('',(127.704359,-132.392142,1.585)); +#132012 = VECTOR('',#132013,1.); +#132013 = DIRECTION('',(1.,0.,0.)); +#132014 = ORIENTED_EDGE('',*,*,#132015,.T.); +#132015 = EDGE_CURVE('',#132008,#132016,#132018,.T.); +#132016 = VERTEX_POINT('',#132017); +#132017 = CARTESIAN_POINT('',(128.359597,-132.522142,1.585)); +#132018 = CIRCLE('',#132019,6.500000000092E-02); +#132019 = AXIS2_PLACEMENT_3D('',#132020,#132021,#132022); +#132020 = CARTESIAN_POINT('',(128.35959665513,-132.457142,1.585)); +#132021 = DIRECTION('',(0.,0.,-1.)); +#132022 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#132023 = ORIENTED_EDGE('',*,*,#132024,.T.); +#132024 = EDGE_CURVE('',#132016,#132025,#132027,.T.); +#132025 = VERTEX_POINT('',#132026); +#132026 = CARTESIAN_POINT('',(127.459597,-132.522142,1.585)); +#132027 = LINE('',#132028,#132029); +#132028 = CARTESIAN_POINT('',(128.359597,-132.522142,1.585)); +#132029 = VECTOR('',#132030,1.); +#132030 = DIRECTION('',(-1.,0.,0.)); +#132031 = ORIENTED_EDGE('',*,*,#132032,.T.); +#132032 = EDGE_CURVE('',#132025,#132033,#132035,.T.); +#132033 = VERTEX_POINT('',#132034); +#132034 = CARTESIAN_POINT('',(127.427348,-132.400706,1.585)); +#132035 = CIRCLE('',#132036,6.500021194141E-02); +#132036 = AXIS2_PLACEMENT_3D('',#132037,#132038,#132039); +#132037 = CARTESIAN_POINT('',(127.45959748648,-132.457141788,1.585)); +#132038 = DIRECTION('',(0.,0.,-1.)); +#132039 = DIRECTION('',(-7.484332334092E-06,-0.999999999972,-0.)); +#132040 = ORIENTED_EDGE('',*,*,#132041,.T.); +#132041 = EDGE_CURVE('',#132033,#132042,#132044,.T.); +#132042 = VERTEX_POINT('',#132043); +#132043 = CARTESIAN_POINT('',(128.114835,-132.007856,1.585)); +#132044 = LINE('',#132045,#132046); +#132045 = CARTESIAN_POINT('',(127.427348,-132.400706,1.585)); +#132046 = VECTOR('',#132047,1.); +#132047 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#132048 = ORIENTED_EDGE('',*,*,#132049,.T.); +#132049 = EDGE_CURVE('',#132042,#131972,#132050,.T.); +#132050 = LINE('',#132051,#132052); +#132051 = CARTESIAN_POINT('',(128.114835,-132.007856,1.585)); +#132052 = VECTOR('',#132053,1.); +#132053 = DIRECTION('',(-1.,0.,0.)); +#132054 = PLANE('',#132055); +#132055 = AXIS2_PLACEMENT_3D('',#132056,#132057,#132058); +#132056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132057 = DIRECTION('',(0.,0.,1.)); +#132058 = DIRECTION('',(1.,0.,-0.)); +#132059 = SHELL_BASED_SURFACE_MODEL('',(#132060)); +#132060 = OPEN_SHELL('',(#132061)); +#132061 = ADVANCED_FACE('',(#132062),#132098,.T.); +#132062 = FACE_BOUND('',#132063,.F.); +#132063 = EDGE_LOOP('',(#132064,#132075,#132083,#132092)); +#132064 = ORIENTED_EDGE('',*,*,#132065,.T.); +#132065 = EDGE_CURVE('',#132066,#132068,#132070,.T.); +#132066 = VERTEX_POINT('',#132067); +#132067 = CARTESIAN_POINT('',(200.19165,-132.3831,1.585)); +#132068 = VERTEX_POINT('',#132069); +#132069 = CARTESIAN_POINT('',(200.19165,-132.2631,1.585)); +#132070 = CIRCLE('',#132071,6.000000000042E-02); +#132071 = AXIS2_PLACEMENT_3D('',#132072,#132073,#132074); +#132072 = CARTESIAN_POINT('',(200.19164977441,-132.3231,1.585)); +#132073 = DIRECTION('',(0.,0.,-1.)); +#132074 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#132075 = ORIENTED_EDGE('',*,*,#132076,.T.); +#132076 = EDGE_CURVE('',#132068,#132077,#132079,.T.); +#132077 = VERTEX_POINT('',#132078); +#132078 = CARTESIAN_POINT('',(204.69165,-132.2631,1.585)); +#132079 = LINE('',#132080,#132081); +#132080 = CARTESIAN_POINT('',(200.19165,-132.2631,1.585)); +#132081 = VECTOR('',#132082,1.); +#132082 = DIRECTION('',(1.,0.,0.)); +#132083 = ORIENTED_EDGE('',*,*,#132084,.T.); +#132084 = EDGE_CURVE('',#132077,#132085,#132087,.T.); +#132085 = VERTEX_POINT('',#132086); +#132086 = CARTESIAN_POINT('',(204.69165,-132.3831,1.585)); +#132087 = CIRCLE('',#132088,6.000000000042E-02); +#132088 = AXIS2_PLACEMENT_3D('',#132089,#132090,#132091); +#132089 = CARTESIAN_POINT('',(204.69165022558,-132.3231,1.585)); +#132090 = DIRECTION('',(0.,0.,-1.)); +#132091 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#132092 = ORIENTED_EDGE('',*,*,#132093,.T.); +#132093 = EDGE_CURVE('',#132085,#132066,#132094,.T.); +#132094 = LINE('',#132095,#132096); +#132095 = CARTESIAN_POINT('',(204.69165,-132.3831,1.585)); +#132096 = VECTOR('',#132097,1.); +#132097 = DIRECTION('',(-1.,0.,0.)); +#132098 = PLANE('',#132099); +#132099 = AXIS2_PLACEMENT_3D('',#132100,#132101,#132102); +#132100 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132101 = DIRECTION('',(0.,0.,1.)); +#132102 = DIRECTION('',(1.,0.,-0.)); +#132103 = SHELL_BASED_SURFACE_MODEL('',(#132104)); +#132104 = OPEN_SHELL('',(#132105)); +#132105 = ADVANCED_FACE('',(#132106),#132249,.T.); +#132106 = FACE_BOUND('',#132107,.F.); +#132107 = EDGE_LOOP('',(#132108,#132118,#132126,#132134,#132143,#132151, + #132159,#132168,#132176,#132184,#132193,#132201,#132209,#132218, + #132226,#132235,#132243)); +#132108 = ORIENTED_EDGE('',*,*,#132109,.T.); +#132109 = EDGE_CURVE('',#132110,#132112,#132114,.T.); +#132110 = VERTEX_POINT('',#132111); +#132111 = CARTESIAN_POINT('',(84.289335,-130.870572,1.585)); +#132112 = VERTEX_POINT('',#132113); +#132113 = CARTESIAN_POINT('',(84.312175,-130.849656,1.585)); +#132114 = LINE('',#132115,#132116); +#132115 = CARTESIAN_POINT('',(84.289335,-130.870572,1.585)); +#132116 = VECTOR('',#132117,1.); +#132117 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#132118 = ORIENTED_EDGE('',*,*,#132119,.T.); +#132119 = EDGE_CURVE('',#132112,#132120,#132122,.T.); +#132120 = VERTEX_POINT('',#132121); +#132121 = CARTESIAN_POINT('',(84.341282,-130.839071,1.585)); +#132122 = LINE('',#132123,#132124); +#132123 = CARTESIAN_POINT('',(84.312175,-130.849656,1.585)); +#132124 = VECTOR('',#132125,1.); +#132125 = DIRECTION('',(0.939786824446,0.341761209908,0.)); +#132126 = ORIENTED_EDGE('',*,*,#132127,.T.); +#132127 = EDGE_CURVE('',#132120,#132128,#132130,.T.); +#132128 = VERTEX_POINT('',#132129); +#132129 = CARTESIAN_POINT('',(84.355046,-130.839676,1.585)); +#132130 = LINE('',#132131,#132132); +#132131 = CARTESIAN_POINT('',(84.341282,-130.839071,1.585)); +#132132 = VECTOR('',#132133,1.); +#132133 = DIRECTION('',(0.99903536577,-4.391284483422E-02,0.)); +#132134 = ORIENTED_EDGE('',*,*,#132135,.T.); +#132135 = EDGE_CURVE('',#132128,#132136,#132138,.T.); +#132136 = VERTEX_POINT('',#132137); +#132137 = CARTESIAN_POINT('',(84.425908,-130.889307,1.585)); +#132138 = CIRCLE('',#132139,7.786403695731E-02); +#132139 = AXIS2_PLACEMENT_3D('',#132140,#132141,#132142); +#132140 = CARTESIAN_POINT('',(84.353335522407,-130.9175212472,1.585)); +#132141 = DIRECTION('',(0.,0.,-1.)); +#132142 = DIRECTION('',(2.196749179894E-02,0.999758685536,0.)); +#132143 = ORIENTED_EDGE('',*,*,#132144,.T.); +#132144 = EDGE_CURVE('',#132136,#132145,#132147,.T.); +#132145 = VERTEX_POINT('',#132146); +#132146 = CARTESIAN_POINT('',(84.432708,-130.917526,1.585)); +#132147 = LINE('',#132148,#132149); +#132148 = CARTESIAN_POINT('',(84.425908,-130.889307,1.585)); +#132149 = VECTOR('',#132150,1.); +#132150 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#132151 = ORIENTED_EDGE('',*,*,#132152,.T.); +#132152 = EDGE_CURVE('',#132145,#132153,#132155,.T.); +#132153 = VERTEX_POINT('',#132154); +#132154 = CARTESIAN_POINT('',(84.431183,-132.203011,1.585)); +#132155 = LINE('',#132156,#132157); +#132156 = CARTESIAN_POINT('',(84.432708,-130.917526,1.585)); +#132157 = VECTOR('',#132158,1.); +#132158 = DIRECTION('',(-1.186321837197E-03,-0.99999929632,0.)); +#132159 = ORIENTED_EDGE('',*,*,#132160,.T.); +#132160 = EDGE_CURVE('',#132153,#132161,#132163,.T.); +#132161 = VERTEX_POINT('',#132162); +#132162 = CARTESIAN_POINT('',(84.275483,-132.203011,1.585)); +#132163 = CIRCLE('',#132164,7.937510771647E-02); +#132164 = AXIS2_PLACEMENT_3D('',#132165,#132166,#132167); +#132165 = CARTESIAN_POINT('',(84.353333,-132.187526,1.585)); +#132166 = DIRECTION('',(-0.,0.,-1.)); +#132167 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132168 = ORIENTED_EDGE('',*,*,#132169,.T.); +#132169 = EDGE_CURVE('',#132161,#132170,#132172,.T.); +#132170 = VERTEX_POINT('',#132171); +#132171 = CARTESIAN_POINT('',(84.273958,-131.275314,1.585)); +#132172 = LINE('',#132173,#132174); +#132173 = CARTESIAN_POINT('',(84.275483,-132.203011,1.585)); +#132174 = VECTOR('',#132175,1.); +#132175 = DIRECTION('',(-1.643853477515E-03,0.999998648872,0.)); +#132176 = ORIENTED_EDGE('',*,*,#132177,.T.); +#132177 = EDGE_CURVE('',#132170,#132178,#132180,.T.); +#132178 = VERTEX_POINT('',#132179); +#132179 = CARTESIAN_POINT('',(83.993998,-131.871623,1.585)); +#132180 = LINE('',#132181,#132182); +#132181 = CARTESIAN_POINT('',(84.273958,-131.275314,1.585)); +#132182 = VECTOR('',#132183,1.); +#132183 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#132184 = ORIENTED_EDGE('',*,*,#132185,.T.); +#132185 = EDGE_CURVE('',#132178,#132186,#132188,.T.); +#132186 = VERTEX_POINT('',#132187); +#132187 = CARTESIAN_POINT('',(83.858072,-131.858235,1.585)); +#132188 = CIRCLE('',#132189,7.93746455782E-02); +#132189 = AXIS2_PLACEMENT_3D('',#132190,#132191,#132192); +#132190 = CARTESIAN_POINT('',(83.930000355023,-131.8246694506,1.585)); +#132191 = DIRECTION('',(-0.,0.,-1.)); +#132192 = DIRECTION('',(0.806273143147,-0.591543420756,-0.)); +#132193 = ORIENTED_EDGE('',*,*,#132194,.T.); +#132194 = EDGE_CURVE('',#132186,#132195,#132197,.T.); +#132195 = VERTEX_POINT('',#132196); +#132196 = CARTESIAN_POINT('',(83.586041,-131.275312,1.585)); +#132197 = LINE('',#132198,#132199); +#132198 = CARTESIAN_POINT('',(83.858072,-131.858235,1.585)); +#132199 = VECTOR('',#132200,1.); +#132200 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#132201 = ORIENTED_EDGE('',*,*,#132202,.T.); +#132202 = EDGE_CURVE('',#132195,#132203,#132205,.T.); +#132203 = VERTEX_POINT('',#132204); +#132204 = CARTESIAN_POINT('',(83.584516,-132.203011,1.585)); +#132205 = LINE('',#132206,#132207); +#132206 = CARTESIAN_POINT('',(83.586041,-131.275312,1.585)); +#132207 = VECTOR('',#132208,1.); +#132208 = DIRECTION('',(-1.643849933588E-03,-0.999998648878,0.)); +#132209 = ORIENTED_EDGE('',*,*,#132210,.T.); +#132210 = EDGE_CURVE('',#132203,#132211,#132213,.T.); +#132211 = VERTEX_POINT('',#132212); +#132212 = CARTESIAN_POINT('',(83.428816,-132.203011,1.585)); +#132213 = CIRCLE('',#132214,7.937510771647E-02); +#132214 = AXIS2_PLACEMENT_3D('',#132215,#132216,#132217); +#132215 = CARTESIAN_POINT('',(83.506666,-132.187526,1.585)); +#132216 = DIRECTION('',(-0.,0.,-1.)); +#132217 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132218 = ORIENTED_EDGE('',*,*,#132219,.T.); +#132219 = EDGE_CURVE('',#132211,#132220,#132222,.T.); +#132220 = VERTEX_POINT('',#132221); +#132221 = CARTESIAN_POINT('',(83.428816,-130.902041,1.585)); +#132222 = LINE('',#132223,#132224); +#132223 = CARTESIAN_POINT('',(83.428816,-132.203011,1.585)); +#132224 = VECTOR('',#132225,1.); +#132225 = DIRECTION('',(0.,1.,0.)); +#132226 = ORIENTED_EDGE('',*,*,#132227,.T.); +#132227 = EDGE_CURVE('',#132220,#132228,#132230,.T.); +#132228 = VERTEX_POINT('',#132229); +#132229 = CARTESIAN_POINT('',(83.578594,-130.883959,1.585)); +#132230 = CIRCLE('',#132231,7.937498694707E-02); +#132231 = AXIS2_PLACEMENT_3D('',#132232,#132233,#132234); +#132232 = CARTESIAN_POINT('',(83.506665897294,-130.9175258972,1.585)); +#132233 = DIRECTION('',(0.,0.,-1.)); +#132234 = DIRECTION('',(-0.980786268925,0.195085352317,0.)); +#132235 = ORIENTED_EDGE('',*,*,#132236,.T.); +#132236 = EDGE_CURVE('',#132228,#132237,#132239,.T.); +#132237 = VERTEX_POINT('',#132238); +#132238 = CARTESIAN_POINT('',(83.929999,-131.63697,1.585)); +#132239 = LINE('',#132240,#132241); +#132240 = CARTESIAN_POINT('',(83.578594,-130.883959,1.585)); +#132241 = VECTOR('',#132242,1.); +#132242 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#132243 = ORIENTED_EDGE('',*,*,#132244,.T.); +#132244 = EDGE_CURVE('',#132237,#132110,#132245,.T.); +#132245 = LINE('',#132246,#132247); +#132246 = CARTESIAN_POINT('',(83.929999,-131.63697,1.585)); +#132247 = VECTOR('',#132248,1.); +#132248 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#132249 = PLANE('',#132250); +#132250 = AXIS2_PLACEMENT_3D('',#132251,#132252,#132253); +#132251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132252 = DIRECTION('',(0.,0.,1.)); +#132253 = DIRECTION('',(1.,0.,-0.)); +#132254 = SHELL_BASED_SURFACE_MODEL('',(#132255)); +#132255 = OPEN_SHELL('',(#132256)); +#132256 = ADVANCED_FACE('',(#132257),#132375,.T.); +#132257 = FACE_BOUND('',#132258,.F.); +#132258 = EDGE_LOOP('',(#132259,#132270,#132278,#132286,#132294,#132303, + #132311,#132320,#132328,#132336,#132344,#132353,#132361,#132369)); +#132259 = ORIENTED_EDGE('',*,*,#132260,.T.); +#132260 = EDGE_CURVE('',#132261,#132263,#132265,.T.); +#132261 = VERTEX_POINT('',#132262); +#132262 = CARTESIAN_POINT('',(84.913997,-130.851528,1.585)); +#132263 = VERTEX_POINT('',#132264); +#132264 = CARTESIAN_POINT('',(85.035945,-130.902041,1.585)); +#132265 = CIRCLE('',#132266,7.937518132318E-02); +#132266 = AXIS2_PLACEMENT_3D('',#132267,#132268,#132269); +#132267 = CARTESIAN_POINT('',(84.958095,-130.9175263772,1.585)); +#132268 = DIRECTION('',(0.,0.,-1.)); +#132269 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#132270 = ORIENTED_EDGE('',*,*,#132271,.T.); +#132271 = EDGE_CURVE('',#132263,#132272,#132274,.T.); +#132272 = VERTEX_POINT('',#132273); +#132273 = CARTESIAN_POINT('',(85.03747,-131.442913,1.585)); +#132274 = LINE('',#132275,#132276); +#132275 = CARTESIAN_POINT('',(85.035945,-130.902041,1.585)); +#132276 = VECTOR('',#132277,1.); +#132277 = DIRECTION('',(2.819509862576E-03,-0.999996025174,0.)); +#132278 = ORIENTED_EDGE('',*,*,#132279,.T.); +#132279 = EDGE_CURVE('',#132272,#132280,#132282,.T.); +#132280 = VERTEX_POINT('',#132281); +#132281 = CARTESIAN_POINT('',(85.604435,-131.442913,1.585)); +#132282 = LINE('',#132283,#132284); +#132283 = CARTESIAN_POINT('',(85.03747,-131.442913,1.585)); +#132284 = VECTOR('',#132285,1.); +#132285 = DIRECTION('',(1.,0.,0.)); +#132286 = ORIENTED_EDGE('',*,*,#132287,.T.); +#132287 = EDGE_CURVE('',#132280,#132288,#132290,.T.); +#132288 = VERTEX_POINT('',#132289); +#132289 = CARTESIAN_POINT('',(85.60596,-130.902041,1.585)); +#132290 = LINE('',#132291,#132292); +#132291 = CARTESIAN_POINT('',(85.604435,-131.442913,1.585)); +#132292 = VECTOR('',#132293,1.); +#132293 = DIRECTION('',(2.819509862576E-03,0.999996025174,0.)); +#132294 = ORIENTED_EDGE('',*,*,#132295,.T.); +#132295 = EDGE_CURVE('',#132288,#132296,#132298,.T.); +#132296 = VERTEX_POINT('',#132297); +#132297 = CARTESIAN_POINT('',(85.76166,-130.902041,1.585)); +#132298 = CIRCLE('',#132299,7.937510771647E-02); +#132299 = AXIS2_PLACEMENT_3D('',#132300,#132301,#132302); +#132300 = CARTESIAN_POINT('',(85.68381,-130.917526,1.585)); +#132301 = DIRECTION('',(0.,0.,-1.)); +#132302 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#132303 = ORIENTED_EDGE('',*,*,#132304,.T.); +#132304 = EDGE_CURVE('',#132296,#132305,#132307,.T.); +#132305 = VERTEX_POINT('',#132306); +#132306 = CARTESIAN_POINT('',(85.76166,-132.203011,1.585)); +#132307 = LINE('',#132308,#132309); +#132308 = CARTESIAN_POINT('',(85.76166,-130.902041,1.585)); +#132309 = VECTOR('',#132310,1.); +#132310 = DIRECTION('',(0.,-1.,0.)); +#132311 = ORIENTED_EDGE('',*,*,#132312,.T.); +#132312 = EDGE_CURVE('',#132305,#132313,#132315,.T.); +#132313 = VERTEX_POINT('',#132314); +#132314 = CARTESIAN_POINT('',(85.60596,-132.203011,1.585)); +#132315 = CIRCLE('',#132316,7.937510771647E-02); +#132316 = AXIS2_PLACEMENT_3D('',#132317,#132318,#132319); +#132317 = CARTESIAN_POINT('',(85.68381,-132.187526,1.585)); +#132318 = DIRECTION('',(-0.,0.,-1.)); +#132319 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132320 = ORIENTED_EDGE('',*,*,#132321,.T.); +#132321 = EDGE_CURVE('',#132313,#132322,#132324,.T.); +#132322 = VERTEX_POINT('',#132323); +#132323 = CARTESIAN_POINT('',(85.604435,-131.601663,1.585)); +#132324 = LINE('',#132325,#132326); +#132325 = CARTESIAN_POINT('',(85.60596,-132.203011,1.585)); +#132326 = VECTOR('',#132327,1.); +#132327 = DIRECTION('',(-2.535961034676E-03,0.999996784446,0.)); +#132328 = ORIENTED_EDGE('',*,*,#132329,.T.); +#132329 = EDGE_CURVE('',#132322,#132330,#132332,.T.); +#132330 = VERTEX_POINT('',#132331); +#132331 = CARTESIAN_POINT('',(85.03747,-131.601663,1.585)); +#132332 = LINE('',#132333,#132334); +#132333 = CARTESIAN_POINT('',(85.604435,-131.601663,1.585)); +#132334 = VECTOR('',#132335,1.); +#132335 = DIRECTION('',(-1.,0.,0.)); +#132336 = ORIENTED_EDGE('',*,*,#132337,.T.); +#132337 = EDGE_CURVE('',#132330,#132338,#132340,.T.); +#132338 = VERTEX_POINT('',#132339); +#132339 = CARTESIAN_POINT('',(85.035945,-132.203011,1.585)); +#132340 = LINE('',#132341,#132342); +#132341 = CARTESIAN_POINT('',(85.03747,-131.601663,1.585)); +#132342 = VECTOR('',#132343,1.); +#132343 = DIRECTION('',(-2.535961034676E-03,-0.999996784446,0.)); +#132344 = ORIENTED_EDGE('',*,*,#132345,.T.); +#132345 = EDGE_CURVE('',#132338,#132346,#132348,.T.); +#132346 = VERTEX_POINT('',#132347); +#132347 = CARTESIAN_POINT('',(84.880245,-132.203011,1.585)); +#132348 = CIRCLE('',#132349,7.937510771647E-02); +#132349 = AXIS2_PLACEMENT_3D('',#132350,#132351,#132352); +#132350 = CARTESIAN_POINT('',(84.958095,-132.187526,1.585)); +#132351 = DIRECTION('',(-0.,0.,-1.)); +#132352 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132353 = ORIENTED_EDGE('',*,*,#132354,.T.); +#132354 = EDGE_CURVE('',#132346,#132355,#132357,.T.); +#132355 = VERTEX_POINT('',#132356); +#132356 = CARTESIAN_POINT('',(84.880245,-130.902041,1.585)); +#132357 = LINE('',#132358,#132359); +#132358 = CARTESIAN_POINT('',(84.880245,-132.203011,1.585)); +#132359 = VECTOR('',#132360,1.); +#132360 = DIRECTION('',(0.,1.,0.)); +#132361 = ORIENTED_EDGE('',*,*,#132362,.T.); +#132362 = EDGE_CURVE('',#132355,#132363,#132365,.T.); +#132363 = VERTEX_POINT('',#132364); +#132364 = CARTESIAN_POINT('',(84.892097,-130.873428,1.585)); +#132365 = LINE('',#132366,#132367); +#132366 = CARTESIAN_POINT('',(84.880245,-130.902041,1.585)); +#132367 = VECTOR('',#132368,1.); +#132368 = DIRECTION('',(0.382686390668,0.923878307137,0.)); +#132369 = ORIENTED_EDGE('',*,*,#132370,.T.); +#132370 = EDGE_CURVE('',#132363,#132261,#132371,.T.); +#132371 = LINE('',#132372,#132373); +#132372 = CARTESIAN_POINT('',(84.892097,-130.873428,1.585)); +#132373 = VECTOR('',#132374,1.); +#132374 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#132375 = PLANE('',#132376); +#132376 = AXIS2_PLACEMENT_3D('',#132377,#132378,#132379); +#132377 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132378 = DIRECTION('',(0.,0.,1.)); +#132379 = DIRECTION('',(1.,0.,-0.)); +#132380 = SHELL_BASED_SURFACE_MODEL('',(#132381)); +#132381 = OPEN_SHELL('',(#132382)); +#132382 = ADVANCED_FACE('',(#132383),#132592,.T.); +#132383 = FACE_BOUND('',#132384,.F.); +#132384 = EDGE_LOOP('',(#132385,#132396,#132404,#132413,#132421,#132429, + #132437,#132445,#132453,#132462,#132470,#132478,#132486,#132494, + #132502,#132511,#132519,#132528,#132536,#132545,#132553,#132561, + #132569,#132578,#132586)); +#132385 = ORIENTED_EDGE('',*,*,#132386,.T.); +#132386 = EDGE_CURVE('',#132387,#132389,#132391,.T.); +#132387 = VERTEX_POINT('',#132388); +#132388 = CARTESIAN_POINT('',(86.152134,-130.995376,1.585)); +#132389 = VERTEX_POINT('',#132390); +#132390 = CARTESIAN_POINT('',(86.152134,-130.839676,1.585)); +#132391 = CIRCLE('',#132392,7.937510771645E-02); +#132392 = AXIS2_PLACEMENT_3D('',#132393,#132394,#132395); +#132393 = CARTESIAN_POINT('',(86.167619,-130.917526,1.585)); +#132394 = DIRECTION('',(0.,0.,-1.)); +#132395 = DIRECTION('',(-0.19508634943,-0.980786070591,-0.)); +#132396 = ORIENTED_EDGE('',*,*,#132397,.T.); +#132397 = EDGE_CURVE('',#132389,#132398,#132400,.T.); +#132398 = VERTEX_POINT('',#132399); +#132399 = CARTESIAN_POINT('',(86.962001,-130.838957,1.585)); +#132400 = LINE('',#132401,#132402); +#132401 = CARTESIAN_POINT('',(86.152134,-130.839676,1.585)); +#132402 = VECTOR('',#132403,1.); +#132403 = DIRECTION('',(0.999999605906,8.877997456989E-04,0.)); +#132404 = ORIENTED_EDGE('',*,*,#132405,.T.); +#132405 = EDGE_CURVE('',#132398,#132406,#132408,.T.); +#132406 = VERTEX_POINT('',#132407); +#132407 = CARTESIAN_POINT('',(87.03166,-130.933011,1.585)); +#132408 = CIRCLE('',#132409,7.881918647195E-02); +#132409 = AXIS2_PLACEMENT_3D('',#132410,#132411,#132412); +#132410 = CARTESIAN_POINT('',(86.954400452492,-130.9174088695,1.585)); +#132411 = DIRECTION('',(0.,0.,-1.)); +#132412 = DIRECTION('',(9.64301694528E-02,0.995339752255,0.)); +#132413 = ORIENTED_EDGE('',*,*,#132414,.T.); +#132414 = EDGE_CURVE('',#132406,#132415,#132417,.T.); +#132415 = VERTEX_POINT('',#132416); +#132416 = CARTESIAN_POINT('',(87.013546,-130.969795,1.585)); +#132417 = LINE('',#132418,#132419); +#132418 = CARTESIAN_POINT('',(87.03166,-130.933011,1.585)); +#132419 = VECTOR('',#132420,1.); +#132420 = DIRECTION('',(-0.441781271633,-0.89712279429,0.)); +#132421 = ORIENTED_EDGE('',*,*,#132422,.T.); +#132422 = EDGE_CURVE('',#132415,#132423,#132425,.T.); +#132423 = VERTEX_POINT('',#132424); +#132424 = CARTESIAN_POINT('',(86.705401,-131.32196,1.585)); +#132425 = LINE('',#132426,#132427); +#132426 = CARTESIAN_POINT('',(87.013546,-130.969795,1.585)); +#132427 = VECTOR('',#132428,1.); +#132428 = DIRECTION('',(-0.658505364328,-0.752576032804,0.)); +#132429 = ORIENTED_EDGE('',*,*,#132430,.T.); +#132430 = EDGE_CURVE('',#132423,#132431,#132433,.T.); +#132431 = VERTEX_POINT('',#132432); +#132432 = CARTESIAN_POINT('',(86.747403,-131.33034,1.585)); +#132433 = LINE('',#132434,#132435); +#132434 = CARTESIAN_POINT('',(86.705401,-131.32196,1.585)); +#132435 = VECTOR('',#132436,1.); +#132436 = DIRECTION('',(0.980672165624,-0.195658129326,0.)); +#132437 = ORIENTED_EDGE('',*,*,#132438,.T.); +#132438 = EDGE_CURVE('',#132431,#132439,#132441,.T.); +#132439 = VERTEX_POINT('',#132440); +#132440 = CARTESIAN_POINT('',(86.882894,-131.400687,1.585)); +#132441 = LINE('',#132442,#132443); +#132442 = CARTESIAN_POINT('',(86.747403,-131.33034,1.585)); +#132443 = VECTOR('',#132444,1.); +#132444 = DIRECTION('',(0.88750704969,-0.460794137061,0.)); +#132445 = ORIENTED_EDGE('',*,*,#132446,.T.); +#132446 = EDGE_CURVE('',#132439,#132447,#132449,.T.); +#132447 = VERTEX_POINT('',#132448); +#132448 = CARTESIAN_POINT('',(86.960132,-131.480124,1.585)); +#132449 = LINE('',#132450,#132451); +#132450 = CARTESIAN_POINT('',(86.882894,-131.400687,1.585)); +#132451 = VECTOR('',#132452,1.); +#132452 = DIRECTION('',(0.697113578041,-0.71696070974,0.)); +#132453 = ORIENTED_EDGE('',*,*,#132454,.T.); +#132454 = EDGE_CURVE('',#132447,#132455,#132457,.T.); +#132455 = VERTEX_POINT('',#132456); +#132456 = CARTESIAN_POINT('',(86.954454,-132.116613,1.585)); +#132457 = CIRCLE('',#132458,0.557296488343); +#132458 = AXIS2_PLACEMENT_3D('',#132459,#132460,#132461); +#132459 = CARTESIAN_POINT('',(86.499827045078,-131.7942875312,1.585)); +#132460 = DIRECTION('',(0.,0.,-1.)); +#132461 = DIRECTION('',(0.825960623385,0.563727814302,0.)); +#132462 = ORIENTED_EDGE('',*,*,#132463,.T.); +#132463 = EDGE_CURVE('',#132455,#132464,#132466,.T.); +#132464 = VERTEX_POINT('',#132465); +#132465 = CARTESIAN_POINT('',(86.875019,-132.193849,1.585)); +#132466 = LINE('',#132467,#132468); +#132467 = CARTESIAN_POINT('',(86.954454,-132.116613,1.585)); +#132468 = VECTOR('',#132469,1.); +#132469 = DIRECTION('',(-0.716960959495,-0.697113321175,0.)); +#132470 = ORIENTED_EDGE('',*,*,#132471,.T.); +#132471 = EDGE_CURVE('',#132464,#132472,#132474,.T.); +#132472 = VERTEX_POINT('',#132473); +#132473 = CARTESIAN_POINT('',(86.72739,-132.265376,1.585)); +#132474 = LINE('',#132475,#132476); +#132475 = CARTESIAN_POINT('',(86.875019,-132.193849,1.585)); +#132476 = VECTOR('',#132477,1.); +#132477 = DIRECTION('',(-0.899935392654,-0.436023266637,0.)); +#132478 = ORIENTED_EDGE('',*,*,#132479,.T.); +#132479 = EDGE_CURVE('',#132472,#132480,#132482,.T.); +#132480 = VERTEX_POINT('',#132481); +#132481 = CARTESIAN_POINT('',(86.328083,-132.264082,1.585)); +#132482 = LINE('',#132483,#132484); +#132483 = CARTESIAN_POINT('',(86.72739,-132.265376,1.585)); +#132484 = VECTOR('',#132485,1.); +#132485 = DIRECTION('',(-0.999994749251,3.240597348736E-03,0.)); +#132486 = ORIENTED_EDGE('',*,*,#132487,.T.); +#132487 = EDGE_CURVE('',#132480,#132488,#132490,.T.); +#132488 = VERTEX_POINT('',#132489); +#132489 = CARTESIAN_POINT('',(86.178055,-132.188172,1.585)); +#132490 = LINE('',#132491,#132492); +#132491 = CARTESIAN_POINT('',(86.328083,-132.264082,1.585)); +#132492 = VECTOR('',#132493,1.); +#132493 = DIRECTION('',(-0.892285461666,0.451471654591,0.)); +#132494 = ORIENTED_EDGE('',*,*,#132495,.T.); +#132495 = EDGE_CURVE('',#132488,#132496,#132498,.T.); +#132496 = VERTEX_POINT('',#132497); +#132497 = CARTESIAN_POINT('',(86.101621,-132.110671,1.585)); +#132498 = LINE('',#132499,#132500); +#132499 = CARTESIAN_POINT('',(86.178055,-132.188172,1.585)); +#132500 = VECTOR('',#132501,1.); +#132501 = DIRECTION('',(-0.702188604259,0.711990985932,0.)); +#132502 = ORIENTED_EDGE('',*,*,#132503,.T.); +#132503 = EDGE_CURVE('',#132496,#132504,#132506,.T.); +#132504 = VERTEX_POINT('',#132505); +#132505 = CARTESIAN_POINT('',(86.211718,-132.000576,1.585)); +#132506 = CIRCLE('',#132507,7.93747707274E-02); +#132507 = AXIS2_PLACEMENT_3D('',#132508,#132509,#132510); +#132508 = CARTESIAN_POINT('',(86.167619049386,-132.0665732482,1.585)); +#132509 = DIRECTION('',(0.,0.,-1.)); +#132510 = DIRECTION('',(-0.831473890019,-0.555563830911,-0.)); +#132511 = ORIENTED_EDGE('',*,*,#132512,.T.); +#132512 = EDGE_CURVE('',#132504,#132513,#132515,.T.); +#132513 = VERTEX_POINT('',#132514); +#132514 = CARTESIAN_POINT('',(86.275114,-132.061816,1.585)); +#132515 = LINE('',#132516,#132517); +#132516 = CARTESIAN_POINT('',(86.211718,-132.000576,1.585)); +#132517 = VECTOR('',#132518,1.); +#132518 = DIRECTION('',(0.719230976915,-0.694771042751,0.)); +#132519 = ORIENTED_EDGE('',*,*,#132520,.T.); +#132520 = EDGE_CURVE('',#132513,#132521,#132523,.T.); +#132521 = VERTEX_POINT('',#132522); +#132522 = CARTESIAN_POINT('',(86.785838,-132.061815,1.585)); +#132523 = CIRCLE('',#132524,0.470261901272); +#132524 = AXIS2_PLACEMENT_3D('',#132525,#132526,#132527); +#132525 = CARTESIAN_POINT('',(86.530475226807,-131.6669275352,1.585)); +#132526 = DIRECTION('',(0.,0.,1.)); +#132527 = DIRECTION('',(-0.543019168928,-0.839720299967,0.)); +#132528 = ORIENTED_EDGE('',*,*,#132529,.T.); +#132529 = EDGE_CURVE('',#132521,#132530,#132532,.T.); +#132530 = VERTEX_POINT('',#132531); +#132531 = CARTESIAN_POINT('',(86.828098,-132.019555,1.585)); +#132532 = LINE('',#132533,#132534); +#132533 = CARTESIAN_POINT('',(86.785838,-132.061815,1.585)); +#132534 = VECTOR('',#132535,1.); +#132535 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#132536 = ORIENTED_EDGE('',*,*,#132537,.T.); +#132537 = EDGE_CURVE('',#132530,#132538,#132540,.T.); +#132538 = VERTEX_POINT('',#132539); +#132539 = CARTESIAN_POINT('',(86.828098,-131.569305,1.585)); +#132540 = CIRCLE('',#132541,0.40312247509); +#132541 = AXIS2_PLACEMENT_3D('',#132542,#132543,#132544); +#132542 = CARTESIAN_POINT('',(86.493693358439,-131.79443,1.585)); +#132543 = DIRECTION('',(0.,-0.,1.)); +#132544 = DIRECTION('',(0.829536089464,-0.558453110187,-0.)); +#132545 = ORIENTED_EDGE('',*,*,#132546,.T.); +#132546 = EDGE_CURVE('',#132538,#132547,#132549,.T.); +#132547 = VERTEX_POINT('',#132548); +#132548 = CARTESIAN_POINT('',(86.785838,-131.527045,1.585)); +#132549 = LINE('',#132550,#132551); +#132550 = CARTESIAN_POINT('',(86.828098,-131.569305,1.585)); +#132551 = VECTOR('',#132552,1.); +#132552 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#132553 = ORIENTED_EDGE('',*,*,#132554,.T.); +#132554 = EDGE_CURVE('',#132547,#132555,#132557,.T.); +#132555 = VERTEX_POINT('',#132556); +#132556 = CARTESIAN_POINT('',(86.693167,-131.48071,1.585)); +#132557 = LINE('',#132558,#132559); +#132558 = CARTESIAN_POINT('',(86.785838,-131.527045,1.585)); +#132559 = VECTOR('',#132560,1.); +#132560 = DIRECTION('',(-0.894429121324,0.447209734831,0.)); +#132561 = ORIENTED_EDGE('',*,*,#132562,.T.); +#132562 = EDGE_CURVE('',#132555,#132563,#132565,.T.); +#132563 = VERTEX_POINT('',#132564); +#132564 = CARTESIAN_POINT('',(86.514991,-131.479185,1.585)); +#132565 = LINE('',#132566,#132567); +#132566 = CARTESIAN_POINT('',(86.693167,-131.48071,1.585)); +#132567 = VECTOR('',#132568,1.); +#132568 = DIRECTION('',(-0.999963374175,8.55863946661E-03,0.)); +#132569 = ORIENTED_EDGE('',*,*,#132570,.T.); +#132570 = EDGE_CURVE('',#132563,#132571,#132573,.T.); +#132571 = VERTEX_POINT('',#132572); +#132572 = CARTESIAN_POINT('',(86.47074,-131.349066,1.585)); +#132573 = CIRCLE('',#132574,7.937553341312E-02); +#132574 = AXIS2_PLACEMENT_3D('',#132575,#132576,#132577); +#132575 = CARTESIAN_POINT('',(86.530476589028,-131.4013346831,1.585)); +#132576 = DIRECTION('',(0.,0.,-1.)); +#132577 = DIRECTION('',(-0.195092723941,-0.980784802628,-0.)); +#132578 = ORIENTED_EDGE('',*,*,#132579,.T.); +#132579 = EDGE_CURVE('',#132571,#132580,#132582,.T.); +#132580 = VERTEX_POINT('',#132581); +#132581 = CARTESIAN_POINT('',(86.778885,-130.996901,1.585)); +#132582 = LINE('',#132583,#132584); +#132583 = CARTESIAN_POINT('',(86.47074,-131.349066,1.585)); +#132584 = VECTOR('',#132585,1.); +#132585 = DIRECTION('',(0.658505364328,0.752576032804,0.)); +#132586 = ORIENTED_EDGE('',*,*,#132587,.T.); +#132587 = EDGE_CURVE('',#132580,#132387,#132588,.T.); +#132588 = LINE('',#132589,#132590); +#132589 = CARTESIAN_POINT('',(86.778885,-130.996901,1.585)); +#132590 = VECTOR('',#132591,1.); +#132591 = DIRECTION('',(-0.999997039823,2.433175991335E-03,0.)); +#132592 = PLANE('',#132593); +#132593 = AXIS2_PLACEMENT_3D('',#132594,#132595,#132596); +#132594 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132595 = DIRECTION('',(0.,0.,1.)); +#132596 = DIRECTION('',(1.,0.,-0.)); +#132597 = SHELL_BASED_SURFACE_MODEL('',(#132598)); +#132598 = OPEN_SHELL('',(#132599)); +#132599 = ADVANCED_FACE('',(#132600),#132802,.T.); +#132600 = FACE_BOUND('',#132601,.F.); +#132601 = EDGE_LOOP('',(#132602,#132613,#132621,#132629,#132637,#132645, + #132654,#132662,#132671,#132679,#132688,#132696,#132705,#132713, + #132722,#132730,#132739,#132747,#132755,#132763,#132772,#132780, + #132788,#132796)); +#132602 = ORIENTED_EDGE('',*,*,#132603,.T.); +#132603 = EDGE_CURVE('',#132604,#132606,#132608,.T.); +#132604 = VERTEX_POINT('',#132605); +#132605 = CARTESIAN_POINT('',(125.200369,-131.742486,1.585)); +#132606 = VERTEX_POINT('',#132607); +#132607 = CARTESIAN_POINT('',(125.419225,-131.523629,1.585)); +#132608 = CIRCLE('',#132609,0.308109459502); +#132609 = AXIS2_PLACEMENT_3D('',#132610,#132611,#132612); +#132610 = CARTESIAN_POINT('',(125.49818845359,-131.8214480927,1.585)); +#132611 = DIRECTION('',(0.,0.,-1.)); +#132612 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#132613 = ORIENTED_EDGE('',*,*,#132614,.T.); +#132614 = EDGE_CURVE('',#132606,#132615,#132617,.T.); +#132615 = VERTEX_POINT('',#132616); +#132616 = CARTESIAN_POINT('',(125.651361,-131.521349,1.585)); +#132617 = LINE('',#132618,#132619); +#132618 = CARTESIAN_POINT('',(125.419225,-131.523629,1.585)); +#132619 = VECTOR('',#132620,1.); +#132620 = DIRECTION('',(0.999951769331,9.821354869939E-03,0.)); +#132621 = ORIENTED_EDGE('',*,*,#132622,.T.); +#132622 = EDGE_CURVE('',#132615,#132623,#132625,.T.); +#132623 = VERTEX_POINT('',#132624); +#132624 = CARTESIAN_POINT('',(125.677237,-131.527576,1.585)); +#132625 = LINE('',#132626,#132627); +#132626 = CARTESIAN_POINT('',(125.651361,-131.521349,1.585)); +#132627 = VECTOR('',#132628,1.); +#132628 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#132629 = ORIENTED_EDGE('',*,*,#132630,.T.); +#132630 = EDGE_CURVE('',#132623,#132631,#132633,.T.); +#132631 = VERTEX_POINT('',#132632); +#132632 = CARTESIAN_POINT('',(125.779844,-131.582609,1.585)); +#132633 = LINE('',#132634,#132635); +#132634 = CARTESIAN_POINT('',(125.677237,-131.527576,1.585)); +#132635 = VECTOR('',#132636,1.); +#132636 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#132637 = ORIENTED_EDGE('',*,*,#132638,.T.); +#132638 = EDGE_CURVE('',#132631,#132639,#132641,.T.); +#132639 = VERTEX_POINT('',#132640); +#132640 = CARTESIAN_POINT('',(125.834878,-131.64236,1.585)); +#132641 = LINE('',#132642,#132643); +#132642 = CARTESIAN_POINT('',(125.779844,-131.582609,1.585)); +#132643 = VECTOR('',#132644,1.); +#132644 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#132645 = ORIENTED_EDGE('',*,*,#132646,.T.); +#132646 = EDGE_CURVE('',#132639,#132647,#132649,.T.); +#132647 = VERTEX_POINT('',#132648); +#132648 = CARTESIAN_POINT('',(125.828491,-132.09444,1.585)); +#132649 = CIRCLE('',#132650,0.407997408492); +#132650 = AXIS2_PLACEMENT_3D('',#132651,#132652,#132653); +#132651 = CARTESIAN_POINT('',(125.4920750414,-131.8636019872,1.585)); +#132652 = DIRECTION('',(0.,0.,-1.)); +#132653 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#132654 = ORIENTED_EDGE('',*,*,#132655,.T.); +#132655 = EDGE_CURVE('',#132647,#132656,#132658,.T.); +#132656 = VERTEX_POINT('',#132657); +#132657 = CARTESIAN_POINT('',(125.779843,-132.145962,1.585)); +#132658 = LINE('',#132659,#132660); +#132659 = CARTESIAN_POINT('',(125.828491,-132.09444,1.585)); +#132660 = VECTOR('',#132661,1.); +#132661 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#132662 = ORIENTED_EDGE('',*,*,#132663,.T.); +#132663 = EDGE_CURVE('',#132656,#132664,#132666,.T.); +#132664 = VERTEX_POINT('',#132665); +#132665 = CARTESIAN_POINT('',(125.687921,-132.054038,1.585)); +#132666 = CIRCLE('',#132667,6.499937665136E-02); +#132667 = AXIS2_PLACEMENT_3D('',#132668,#132669,#132670); +#132668 = CARTESIAN_POINT('',(125.73388218097,-132.099999819,1.585)); +#132669 = DIRECTION('',(-0.,0.,-1.)); +#132670 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#132671 = ORIENTED_EDGE('',*,*,#132672,.T.); +#132672 = EDGE_CURVE('',#132664,#132673,#132675,.T.); +#132673 = VERTEX_POINT('',#132674); +#132674 = CARTESIAN_POINT('',(125.723319,-132.01864,1.585)); +#132675 = LINE('',#132676,#132677); +#132676 = CARTESIAN_POINT('',(125.687921,-132.054038,1.585)); +#132677 = VECTOR('',#132678,1.); +#132678 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#132679 = ORIENTED_EDGE('',*,*,#132680,.T.); +#132680 = EDGE_CURVE('',#132673,#132681,#132683,.T.); +#132681 = VERTEX_POINT('',#132682); +#132682 = CARTESIAN_POINT('',(125.723319,-131.709932,1.585)); +#132683 = CIRCLE('',#132684,0.277419178293); +#132684 = AXIS2_PLACEMENT_3D('',#132685,#132686,#132687); +#132685 = CARTESIAN_POINT('',(125.492806,-131.864286,1.585)); +#132686 = DIRECTION('',(0.,-0.,1.)); +#132687 = DIRECTION('',(0.830919482272,-0.556392679661,-0.)); +#132688 = ORIENTED_EDGE('',*,*,#132689,.T.); +#132689 = EDGE_CURVE('',#132681,#132690,#132692,.T.); +#132690 = VERTEX_POINT('',#132691); +#132691 = CARTESIAN_POINT('',(125.695379,-131.681992,1.585)); +#132692 = LINE('',#132693,#132694); +#132693 = CARTESIAN_POINT('',(125.723319,-131.709932,1.585)); +#132694 = VECTOR('',#132695,1.); +#132695 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#132696 = ORIENTED_EDGE('',*,*,#132697,.T.); +#132697 = EDGE_CURVE('',#132690,#132698,#132700,.T.); +#132698 = VERTEX_POINT('',#132699); +#132699 = CARTESIAN_POINT('',(125.386671,-131.681992,1.585)); +#132700 = CIRCLE('',#132701,0.277419178293); +#132701 = AXIS2_PLACEMENT_3D('',#132702,#132703,#132704); +#132702 = CARTESIAN_POINT('',(125.541025,-131.912505,1.585)); +#132703 = DIRECTION('',(0.,0.,1.)); +#132704 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#132705 = ORIENTED_EDGE('',*,*,#132706,.T.); +#132706 = EDGE_CURVE('',#132698,#132707,#132709,.T.); +#132707 = VERTEX_POINT('',#132708); +#132708 = CARTESIAN_POINT('',(125.358733,-131.70993,1.585)); +#132709 = LINE('',#132710,#132711); +#132710 = CARTESIAN_POINT('',(125.386671,-131.681992,1.585)); +#132711 = VECTOR('',#132712,1.); +#132712 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#132713 = ORIENTED_EDGE('',*,*,#132714,.T.); +#132714 = EDGE_CURVE('',#132707,#132715,#132717,.T.); +#132715 = VERTEX_POINT('',#132716); +#132716 = CARTESIAN_POINT('',(125.358732,-132.01864,1.585)); +#132717 = CIRCLE('',#132718,0.277420975587); +#132718 = AXIS2_PLACEMENT_3D('',#132719,#132720,#132721); +#132719 = CARTESIAN_POINT('',(125.5892469934,-131.8642857467,1.585)); +#132720 = DIRECTION('',(0.,0.,1.)); +#132721 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#132722 = ORIENTED_EDGE('',*,*,#132723,.T.); +#132723 = EDGE_CURVE('',#132715,#132724,#132726,.T.); +#132724 = VERTEX_POINT('',#132725); +#132725 = CARTESIAN_POINT('',(125.39413,-132.054038,1.585)); +#132726 = LINE('',#132727,#132728); +#132727 = CARTESIAN_POINT('',(125.358732,-132.01864,1.585)); +#132728 = VECTOR('',#132729,1.); +#132729 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#132730 = ORIENTED_EDGE('',*,*,#132731,.T.); +#132731 = EDGE_CURVE('',#132724,#132732,#132734,.T.); +#132732 = VERTEX_POINT('',#132733); +#132733 = CARTESIAN_POINT('',(125.341701,-132.164677,1.585)); +#132734 = CIRCLE('',#132735,6.49998003212E-02); +#132735 = AXIS2_PLACEMENT_3D('',#132736,#132737,#132738); +#132736 = CARTESIAN_POINT('',(125.34816812219,-132.0999997213,1.585)); +#132737 = DIRECTION('',(0.,0.,-1.)); +#132738 = DIRECTION('',(0.707107984623,0.707105577748,0.)); +#132739 = ORIENTED_EDGE('',*,*,#132740,.T.); +#132740 = EDGE_CURVE('',#132732,#132741,#132743,.T.); +#132741 = VERTEX_POINT('',#132742); +#132742 = CARTESIAN_POINT('',(124.894723,-132.117195,1.585)); +#132743 = LINE('',#132744,#132745); +#132744 = CARTESIAN_POINT('',(125.341701,-132.164677,1.585)); +#132745 = VECTOR('',#132746,1.); +#132746 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#132747 = ORIENTED_EDGE('',*,*,#132748,.T.); +#132748 = EDGE_CURVE('',#132741,#132749,#132751,.T.); +#132749 = VERTEX_POINT('',#132750); +#132750 = CARTESIAN_POINT('',(124.857368,-132.075918,1.585)); +#132751 = LINE('',#132752,#132753); +#132752 = CARTESIAN_POINT('',(124.894723,-132.117195,1.585)); +#132753 = VECTOR('',#132754,1.); +#132754 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#132755 = ORIENTED_EDGE('',*,*,#132756,.T.); +#132756 = EDGE_CURVE('',#132749,#132757,#132759,.T.); +#132757 = VERTEX_POINT('',#132758); +#132758 = CARTESIAN_POINT('',(124.854597,-131.628571,1.585)); +#132759 = LINE('',#132760,#132761); +#132760 = CARTESIAN_POINT('',(124.857368,-132.075918,1.585)); +#132761 = VECTOR('',#132762,1.); +#132762 = DIRECTION('',(-6.194177765461E-03,0.999980815897,0.)); +#132763 = ORIENTED_EDGE('',*,*,#132764,.T.); +#132764 = EDGE_CURVE('',#132757,#132765,#132767,.T.); +#132765 = VERTEX_POINT('',#132766); +#132766 = CARTESIAN_POINT('',(124.984597,-131.628571,1.585)); +#132767 = CIRCLE('',#132768,6.500000000092E-02); +#132768 = AXIS2_PLACEMENT_3D('',#132769,#132770,#132771); +#132769 = CARTESIAN_POINT('',(124.919597,-131.6285713448,1.585)); +#132770 = DIRECTION('',(0.,0.,-1.)); +#132771 = DIRECTION('',(-0.999999999986,5.305658462925E-06,0.)); +#132772 = ORIENTED_EDGE('',*,*,#132773,.T.); +#132773 = EDGE_CURVE('',#132765,#132774,#132776,.T.); +#132774 = VERTEX_POINT('',#132775); +#132775 = CARTESIAN_POINT('',(124.984597,-131.998319,1.585)); +#132776 = LINE('',#132777,#132778); +#132777 = CARTESIAN_POINT('',(124.984597,-131.628571,1.585)); +#132778 = VECTOR('',#132779,1.); +#132779 = DIRECTION('',(0.,-1.,0.)); +#132780 = ORIENTED_EDGE('',*,*,#132781,.T.); +#132781 = EDGE_CURVE('',#132774,#132782,#132784,.T.); +#132782 = VERTEX_POINT('',#132783); +#132783 = CARTESIAN_POINT('',(125.214733,-132.021332,1.585)); +#132784 = LINE('',#132785,#132786); +#132785 = CARTESIAN_POINT('',(124.984597,-131.998319,1.585)); +#132786 = VECTOR('',#132787,1.); +#132787 = DIRECTION('',(0.99503744706,-9.950115049005E-02,0.)); +#132788 = ORIENTED_EDGE('',*,*,#132789,.T.); +#132789 = EDGE_CURVE('',#132782,#132790,#132792,.T.); +#132790 = VERTEX_POINT('',#132791); +#132791 = CARTESIAN_POINT('',(125.197618,-131.976037,1.585)); +#132792 = LINE('',#132793,#132794); +#132793 = CARTESIAN_POINT('',(125.214733,-132.021332,1.585)); +#132794 = VECTOR('',#132795,1.); +#132795 = DIRECTION('',(-0.353464827547,0.935447815587,0.)); +#132796 = ORIENTED_EDGE('',*,*,#132797,.T.); +#132797 = EDGE_CURVE('',#132790,#132604,#132798,.T.); +#132798 = LINE('',#132799,#132800); +#132799 = CARTESIAN_POINT('',(125.197618,-131.976037,1.585)); +#132800 = VECTOR('',#132801,1.); +#132801 = DIRECTION('',(1.177819480941E-02,0.999930634658,0.)); +#132802 = PLANE('',#132803); +#132803 = AXIS2_PLACEMENT_3D('',#132804,#132805,#132806); +#132804 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132805 = DIRECTION('',(0.,0.,1.)); +#132806 = DIRECTION('',(1.,0.,-0.)); +#132807 = SHELL_BASED_SURFACE_MODEL('',(#132808)); +#132808 = OPEN_SHELL('',(#132809)); +#132809 = ADVANCED_FACE('',(#132810),#132953,.T.); +#132810 = FACE_BOUND('',#132811,.F.); +#132811 = EDGE_LOOP('',(#132812,#132822,#132830,#132838,#132847,#132855, + #132863,#132872,#132880,#132888,#132897,#132905,#132913,#132922, + #132930,#132939,#132947)); +#132812 = ORIENTED_EDGE('',*,*,#132813,.T.); +#132813 = EDGE_CURVE('',#132814,#132816,#132818,.T.); +#132814 = VERTEX_POINT('',#132815); +#132815 = CARTESIAN_POINT('',(210.289335,-130.720572,1.585)); +#132816 = VERTEX_POINT('',#132817); +#132817 = CARTESIAN_POINT('',(210.312175,-130.699656,1.585)); +#132818 = LINE('',#132819,#132820); +#132819 = CARTESIAN_POINT('',(210.289335,-130.720572,1.585)); +#132820 = VECTOR('',#132821,1.); +#132821 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#132822 = ORIENTED_EDGE('',*,*,#132823,.T.); +#132823 = EDGE_CURVE('',#132816,#132824,#132826,.T.); +#132824 = VERTEX_POINT('',#132825); +#132825 = CARTESIAN_POINT('',(210.341282,-130.689071,1.585)); +#132826 = LINE('',#132827,#132828); +#132827 = CARTESIAN_POINT('',(210.312175,-130.699656,1.585)); +#132828 = VECTOR('',#132829,1.); +#132829 = DIRECTION('',(0.939786824446,0.341761209907,0.)); +#132830 = ORIENTED_EDGE('',*,*,#132831,.T.); +#132831 = EDGE_CURVE('',#132824,#132832,#132834,.T.); +#132832 = VERTEX_POINT('',#132833); +#132833 = CARTESIAN_POINT('',(210.355046,-130.689676,1.585)); +#132834 = LINE('',#132835,#132836); +#132835 = CARTESIAN_POINT('',(210.341282,-130.689071,1.585)); +#132836 = VECTOR('',#132837,1.); +#132837 = DIRECTION('',(0.99903536577,-4.39128448322E-02,0.)); +#132838 = ORIENTED_EDGE('',*,*,#132839,.T.); +#132839 = EDGE_CURVE('',#132832,#132840,#132842,.T.); +#132840 = VERTEX_POINT('',#132841); +#132841 = CARTESIAN_POINT('',(210.425908,-130.739307,1.585)); +#132842 = CIRCLE('',#132843,7.786403695722E-02); +#132843 = AXIS2_PLACEMENT_3D('',#132844,#132845,#132846); +#132844 = CARTESIAN_POINT('',(210.3533355224,-130.7675212472,1.585)); +#132845 = DIRECTION('',(0.,0.,-1.)); +#132846 = DIRECTION('',(2.196749179824E-02,0.999758685536,0.)); +#132847 = ORIENTED_EDGE('',*,*,#132848,.T.); +#132848 = EDGE_CURVE('',#132840,#132849,#132851,.T.); +#132849 = VERTEX_POINT('',#132850); +#132850 = CARTESIAN_POINT('',(210.432708,-130.767526,1.585)); +#132851 = LINE('',#132852,#132853); +#132852 = CARTESIAN_POINT('',(210.425908,-130.739307,1.585)); +#132853 = VECTOR('',#132854,1.); +#132854 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#132855 = ORIENTED_EDGE('',*,*,#132856,.T.); +#132856 = EDGE_CURVE('',#132849,#132857,#132859,.T.); +#132857 = VERTEX_POINT('',#132858); +#132858 = CARTESIAN_POINT('',(210.431183,-132.053011,1.585)); +#132859 = LINE('',#132860,#132861); +#132860 = CARTESIAN_POINT('',(210.432708,-130.767526,1.585)); +#132861 = VECTOR('',#132862,1.); +#132862 = DIRECTION('',(-1.186321837186E-03,-0.99999929632,0.)); +#132863 = ORIENTED_EDGE('',*,*,#132864,.T.); +#132864 = EDGE_CURVE('',#132857,#132865,#132867,.T.); +#132865 = VERTEX_POINT('',#132866); +#132866 = CARTESIAN_POINT('',(210.275483,-132.053011,1.585)); +#132867 = CIRCLE('',#132868,7.937510771645E-02); +#132868 = AXIS2_PLACEMENT_3D('',#132869,#132870,#132871); +#132869 = CARTESIAN_POINT('',(210.353333,-132.037526,1.585)); +#132870 = DIRECTION('',(-0.,0.,-1.)); +#132871 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132872 = ORIENTED_EDGE('',*,*,#132873,.T.); +#132873 = EDGE_CURVE('',#132865,#132874,#132876,.T.); +#132874 = VERTEX_POINT('',#132875); +#132875 = CARTESIAN_POINT('',(210.273958,-131.125314,1.585)); +#132876 = LINE('',#132877,#132878); +#132877 = CARTESIAN_POINT('',(210.275483,-132.053011,1.585)); +#132878 = VECTOR('',#132879,1.); +#132879 = DIRECTION('',(-1.643853477531E-03,0.999998648872,0.)); +#132880 = ORIENTED_EDGE('',*,*,#132881,.T.); +#132881 = EDGE_CURVE('',#132874,#132882,#132884,.T.); +#132882 = VERTEX_POINT('',#132883); +#132883 = CARTESIAN_POINT('',(209.993998,-131.721623,1.585)); +#132884 = LINE('',#132885,#132886); +#132885 = CARTESIAN_POINT('',(210.273958,-131.125314,1.585)); +#132886 = VECTOR('',#132887,1.); +#132887 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#132888 = ORIENTED_EDGE('',*,*,#132889,.T.); +#132889 = EDGE_CURVE('',#132882,#132890,#132892,.T.); +#132890 = VERTEX_POINT('',#132891); +#132891 = CARTESIAN_POINT('',(209.858072,-131.708235,1.585)); +#132892 = CIRCLE('',#132893,7.937464557818E-02); +#132893 = AXIS2_PLACEMENT_3D('',#132894,#132895,#132896); +#132894 = CARTESIAN_POINT('',(209.93000035502,-131.6746694506,1.585)); +#132895 = DIRECTION('',(-0.,0.,-1.)); +#132896 = DIRECTION('',(0.806273143148,-0.591543420755,-0.)); +#132897 = ORIENTED_EDGE('',*,*,#132898,.T.); +#132898 = EDGE_CURVE('',#132890,#132899,#132901,.T.); +#132899 = VERTEX_POINT('',#132900); +#132900 = CARTESIAN_POINT('',(209.586041,-131.125312,1.585)); +#132901 = LINE('',#132902,#132903); +#132902 = CARTESIAN_POINT('',(209.858072,-131.708235,1.585)); +#132903 = VECTOR('',#132904,1.); +#132904 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#132905 = ORIENTED_EDGE('',*,*,#132906,.T.); +#132906 = EDGE_CURVE('',#132899,#132907,#132909,.T.); +#132907 = VERTEX_POINT('',#132908); +#132908 = CARTESIAN_POINT('',(209.584516,-132.053011,1.585)); +#132909 = LINE('',#132910,#132911); +#132910 = CARTESIAN_POINT('',(209.586041,-131.125312,1.585)); +#132911 = VECTOR('',#132912,1.); +#132912 = DIRECTION('',(-1.643849933573E-03,-0.999998648878,0.)); +#132913 = ORIENTED_EDGE('',*,*,#132914,.T.); +#132914 = EDGE_CURVE('',#132907,#132915,#132917,.T.); +#132915 = VERTEX_POINT('',#132916); +#132916 = CARTESIAN_POINT('',(209.428816,-132.053011,1.585)); +#132917 = CIRCLE('',#132918,7.937510771647E-02); +#132918 = AXIS2_PLACEMENT_3D('',#132919,#132920,#132921); +#132919 = CARTESIAN_POINT('',(209.506666,-132.037526,1.585)); +#132920 = DIRECTION('',(-0.,0.,-1.)); +#132921 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132922 = ORIENTED_EDGE('',*,*,#132923,.T.); +#132923 = EDGE_CURVE('',#132915,#132924,#132926,.T.); +#132924 = VERTEX_POINT('',#132925); +#132925 = CARTESIAN_POINT('',(209.428816,-130.752041,1.585)); +#132926 = LINE('',#132927,#132928); +#132927 = CARTESIAN_POINT('',(209.428816,-132.053011,1.585)); +#132928 = VECTOR('',#132929,1.); +#132929 = DIRECTION('',(0.,1.,0.)); +#132930 = ORIENTED_EDGE('',*,*,#132931,.T.); +#132931 = EDGE_CURVE('',#132924,#132932,#132934,.T.); +#132932 = VERTEX_POINT('',#132933); +#132933 = CARTESIAN_POINT('',(209.578594,-130.733959,1.585)); +#132934 = CIRCLE('',#132935,7.937498694707E-02); +#132935 = AXIS2_PLACEMENT_3D('',#132936,#132937,#132938); +#132936 = CARTESIAN_POINT('',(209.50666589729,-130.7675258972,1.585)); +#132937 = DIRECTION('',(0.,0.,-1.)); +#132938 = DIRECTION('',(-0.980786268925,0.195085352317,0.)); +#132939 = ORIENTED_EDGE('',*,*,#132940,.T.); +#132940 = EDGE_CURVE('',#132932,#132941,#132943,.T.); +#132941 = VERTEX_POINT('',#132942); +#132942 = CARTESIAN_POINT('',(209.929999,-131.48697,1.585)); +#132943 = LINE('',#132944,#132945); +#132944 = CARTESIAN_POINT('',(209.578594,-130.733959,1.585)); +#132945 = VECTOR('',#132946,1.); +#132946 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#132947 = ORIENTED_EDGE('',*,*,#132948,.T.); +#132948 = EDGE_CURVE('',#132941,#132814,#132949,.T.); +#132949 = LINE('',#132950,#132951); +#132950 = CARTESIAN_POINT('',(209.929999,-131.48697,1.585)); +#132951 = VECTOR('',#132952,1.); +#132952 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#132953 = PLANE('',#132954); +#132954 = AXIS2_PLACEMENT_3D('',#132955,#132956,#132957); +#132955 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132956 = DIRECTION('',(0.,0.,1.)); +#132957 = DIRECTION('',(1.,0.,-0.)); +#132958 = SHELL_BASED_SURFACE_MODEL('',(#132959)); +#132959 = OPEN_SHELL('',(#132960)); +#132960 = ADVANCED_FACE('',(#132961),#133079,.T.); +#132961 = FACE_BOUND('',#132962,.F.); +#132962 = EDGE_LOOP('',(#132963,#132974,#132982,#132990,#132998,#133007, + #133015,#133024,#133032,#133040,#133048,#133057,#133065,#133073)); +#132963 = ORIENTED_EDGE('',*,*,#132964,.T.); +#132964 = EDGE_CURVE('',#132965,#132967,#132969,.T.); +#132965 = VERTEX_POINT('',#132966); +#132966 = CARTESIAN_POINT('',(210.913997,-130.701528,1.585)); +#132967 = VERTEX_POINT('',#132968); +#132968 = CARTESIAN_POINT('',(211.035945,-130.752041,1.585)); +#132969 = CIRCLE('',#132970,7.937518132319E-02); +#132970 = AXIS2_PLACEMENT_3D('',#132971,#132972,#132973); +#132971 = CARTESIAN_POINT('',(210.958095,-130.7675263772,1.585)); +#132972 = DIRECTION('',(0.,0.,-1.)); +#132973 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#132974 = ORIENTED_EDGE('',*,*,#132975,.T.); +#132975 = EDGE_CURVE('',#132967,#132976,#132978,.T.); +#132976 = VERTEX_POINT('',#132977); +#132977 = CARTESIAN_POINT('',(211.03747,-131.292913,1.585)); +#132978 = LINE('',#132979,#132980); +#132979 = CARTESIAN_POINT('',(211.035945,-130.752041,1.585)); +#132980 = VECTOR('',#132981,1.); +#132981 = DIRECTION('',(2.819509862603E-03,-0.999996025174,0.)); +#132982 = ORIENTED_EDGE('',*,*,#132983,.T.); +#132983 = EDGE_CURVE('',#132976,#132984,#132986,.T.); +#132984 = VERTEX_POINT('',#132985); +#132985 = CARTESIAN_POINT('',(211.604435,-131.292913,1.585)); +#132986 = LINE('',#132987,#132988); +#132987 = CARTESIAN_POINT('',(211.03747,-131.292913,1.585)); +#132988 = VECTOR('',#132989,1.); +#132989 = DIRECTION('',(1.,0.,0.)); +#132990 = ORIENTED_EDGE('',*,*,#132991,.T.); +#132991 = EDGE_CURVE('',#132984,#132992,#132994,.T.); +#132992 = VERTEX_POINT('',#132993); +#132993 = CARTESIAN_POINT('',(211.60596,-130.752041,1.585)); +#132994 = LINE('',#132995,#132996); +#132995 = CARTESIAN_POINT('',(211.604435,-131.292913,1.585)); +#132996 = VECTOR('',#132997,1.); +#132997 = DIRECTION('',(2.819509862603E-03,0.999996025174,0.)); +#132998 = ORIENTED_EDGE('',*,*,#132999,.T.); +#132999 = EDGE_CURVE('',#132992,#133000,#133002,.T.); +#133000 = VERTEX_POINT('',#133001); +#133001 = CARTESIAN_POINT('',(211.76166,-130.752041,1.585)); +#133002 = CIRCLE('',#133003,7.937510771645E-02); +#133003 = AXIS2_PLACEMENT_3D('',#133004,#133005,#133006); +#133004 = CARTESIAN_POINT('',(211.68381,-130.767526,1.585)); +#133005 = DIRECTION('',(0.,0.,-1.)); +#133006 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#133007 = ORIENTED_EDGE('',*,*,#133008,.T.); +#133008 = EDGE_CURVE('',#133000,#133009,#133011,.T.); +#133009 = VERTEX_POINT('',#133010); +#133010 = CARTESIAN_POINT('',(211.76166,-132.053011,1.585)); +#133011 = LINE('',#133012,#133013); +#133012 = CARTESIAN_POINT('',(211.76166,-130.752041,1.585)); +#133013 = VECTOR('',#133014,1.); +#133014 = DIRECTION('',(0.,-1.,0.)); +#133015 = ORIENTED_EDGE('',*,*,#133016,.T.); +#133016 = EDGE_CURVE('',#133009,#133017,#133019,.T.); +#133017 = VERTEX_POINT('',#133018); +#133018 = CARTESIAN_POINT('',(211.60596,-132.053011,1.585)); +#133019 = CIRCLE('',#133020,7.937510771647E-02); +#133020 = AXIS2_PLACEMENT_3D('',#133021,#133022,#133023); +#133021 = CARTESIAN_POINT('',(211.68381,-132.037526,1.585)); +#133022 = DIRECTION('',(-0.,0.,-1.)); +#133023 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#133024 = ORIENTED_EDGE('',*,*,#133025,.T.); +#133025 = EDGE_CURVE('',#133017,#133026,#133028,.T.); +#133026 = VERTEX_POINT('',#133027); +#133027 = CARTESIAN_POINT('',(211.604435,-131.451663,1.585)); +#133028 = LINE('',#133029,#133030); +#133029 = CARTESIAN_POINT('',(211.60596,-132.053011,1.585)); +#133030 = VECTOR('',#133031,1.); +#133031 = DIRECTION('',(-2.5359610347E-03,0.999996784446,0.)); +#133032 = ORIENTED_EDGE('',*,*,#133033,.T.); +#133033 = EDGE_CURVE('',#133026,#133034,#133036,.T.); +#133034 = VERTEX_POINT('',#133035); +#133035 = CARTESIAN_POINT('',(211.03747,-131.451663,1.585)); +#133036 = LINE('',#133037,#133038); +#133037 = CARTESIAN_POINT('',(211.604435,-131.451663,1.585)); +#133038 = VECTOR('',#133039,1.); +#133039 = DIRECTION('',(-1.,0.,0.)); +#133040 = ORIENTED_EDGE('',*,*,#133041,.T.); +#133041 = EDGE_CURVE('',#133034,#133042,#133044,.T.); +#133042 = VERTEX_POINT('',#133043); +#133043 = CARTESIAN_POINT('',(211.035945,-132.053011,1.585)); +#133044 = LINE('',#133045,#133046); +#133045 = CARTESIAN_POINT('',(211.03747,-131.451663,1.585)); +#133046 = VECTOR('',#133047,1.); +#133047 = DIRECTION('',(-2.5359610347E-03,-0.999996784446,0.)); +#133048 = ORIENTED_EDGE('',*,*,#133049,.T.); +#133049 = EDGE_CURVE('',#133042,#133050,#133052,.T.); +#133050 = VERTEX_POINT('',#133051); +#133051 = CARTESIAN_POINT('',(210.880245,-132.053011,1.585)); +#133052 = CIRCLE('',#133053,7.937510771645E-02); +#133053 = AXIS2_PLACEMENT_3D('',#133054,#133055,#133056); +#133054 = CARTESIAN_POINT('',(210.958095,-132.037526,1.585)); +#133055 = DIRECTION('',(-0.,0.,-1.)); +#133056 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#133057 = ORIENTED_EDGE('',*,*,#133058,.T.); +#133058 = EDGE_CURVE('',#133050,#133059,#133061,.T.); +#133059 = VERTEX_POINT('',#133060); +#133060 = CARTESIAN_POINT('',(210.880245,-130.752041,1.585)); +#133061 = LINE('',#133062,#133063); +#133062 = CARTESIAN_POINT('',(210.880245,-132.053011,1.585)); +#133063 = VECTOR('',#133064,1.); +#133064 = DIRECTION('',(0.,1.,0.)); +#133065 = ORIENTED_EDGE('',*,*,#133066,.T.); +#133066 = EDGE_CURVE('',#133059,#133067,#133069,.T.); +#133067 = VERTEX_POINT('',#133068); +#133068 = CARTESIAN_POINT('',(210.892097,-130.723428,1.585)); +#133069 = LINE('',#133070,#133071); +#133070 = CARTESIAN_POINT('',(210.880245,-130.752041,1.585)); +#133071 = VECTOR('',#133072,1.); +#133072 = DIRECTION('',(0.382686390668,0.923878307136,0.)); +#133073 = ORIENTED_EDGE('',*,*,#133074,.T.); +#133074 = EDGE_CURVE('',#133067,#132965,#133075,.T.); +#133075 = LINE('',#133076,#133077); +#133076 = CARTESIAN_POINT('',(210.892097,-130.723428,1.585)); +#133077 = VECTOR('',#133078,1.); +#133078 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#133079 = PLANE('',#133080); +#133080 = AXIS2_PLACEMENT_3D('',#133081,#133082,#133083); +#133081 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133082 = DIRECTION('',(0.,0.,1.)); +#133083 = DIRECTION('',(1.,0.,-0.)); +#133084 = SHELL_BASED_SURFACE_MODEL('',(#133085)); +#133085 = OPEN_SHELL('',(#133086)); +#133086 = ADVANCED_FACE('',(#133087),#133222,.T.); +#133087 = FACE_BOUND('',#133088,.F.); +#133088 = EDGE_LOOP('',(#133089,#133100,#133108,#133116,#133124,#133133, + #133141,#133149,#133158,#133166,#133174,#133183,#133191,#133199, + #133208,#133216)); +#133089 = ORIENTED_EDGE('',*,*,#133090,.T.); +#133090 = EDGE_CURVE('',#133091,#133093,#133095,.T.); +#133091 = VERTEX_POINT('',#133092); +#133092 = CARTESIAN_POINT('',(212.48181,-130.644344,1.585)); +#133093 = VERTEX_POINT('',#133094); +#133094 = CARTESIAN_POINT('',(212.609228,-130.716978,1.585)); +#133095 = CIRCLE('',#133096,7.93753763862E-02); +#133096 = AXIS2_PLACEMENT_3D('',#133097,#133098,#133099); +#133097 = CARTESIAN_POINT('',(212.53047591426,-130.7070502928,1.585)); +#133098 = DIRECTION('',(0.,0.,-1.)); +#133099 = DIRECTION('',(-0.613110973215,0.789996793995,0.)); +#133100 = ORIENTED_EDGE('',*,*,#133101,.T.); +#133101 = EDGE_CURVE('',#133093,#133102,#133104,.T.); +#133102 = VERTEX_POINT('',#133103); +#133103 = CARTESIAN_POINT('',(212.338222,-131.534817,1.585)); +#133104 = LINE('',#133105,#133106); +#133105 = CARTESIAN_POINT('',(212.609228,-130.716978,1.585)); +#133106 = VECTOR('',#133107,1.); +#133107 = DIRECTION('',(-0.314548593613,-0.949241371968,0.)); +#133108 = ORIENTED_EDGE('',*,*,#133109,.T.); +#133109 = EDGE_CURVE('',#133102,#133110,#133112,.T.); +#133110 = VERTEX_POINT('',#133111); +#133111 = CARTESIAN_POINT('',(212.753482,-131.534817,1.585)); +#133112 = LINE('',#133113,#133114); +#133113 = CARTESIAN_POINT('',(212.338222,-131.534817,1.585)); +#133114 = VECTOR('',#133115,1.); +#133115 = DIRECTION('',(1.,0.,0.)); +#133116 = ORIENTED_EDGE('',*,*,#133117,.T.); +#133117 = EDGE_CURVE('',#133110,#133118,#133120,.T.); +#133118 = VERTEX_POINT('',#133119); +#133119 = CARTESIAN_POINT('',(212.755007,-131.175374,1.585)); +#133120 = LINE('',#133121,#133122); +#133121 = CARTESIAN_POINT('',(212.753482,-131.534817,1.585)); +#133122 = VECTOR('',#133123,1.); +#133123 = DIRECTION('',(4.242637288737E-03,0.999990999974,0.)); +#133124 = ORIENTED_EDGE('',*,*,#133125,.T.); +#133125 = EDGE_CURVE('',#133118,#133126,#133128,.T.); +#133126 = VERTEX_POINT('',#133127); +#133127 = CARTESIAN_POINT('',(212.910707,-131.175374,1.585)); +#133128 = CIRCLE('',#133129,7.937510771645E-02); +#133129 = AXIS2_PLACEMENT_3D('',#133130,#133131,#133132); +#133130 = CARTESIAN_POINT('',(212.832857,-131.190859,1.585)); +#133131 = DIRECTION('',(0.,0.,-1.)); +#133132 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#133133 = ORIENTED_EDGE('',*,*,#133134,.T.); +#133134 = EDGE_CURVE('',#133126,#133135,#133137,.T.); +#133135 = VERTEX_POINT('',#133136); +#133136 = CARTESIAN_POINT('',(212.912232,-131.534817,1.585)); +#133137 = LINE('',#133138,#133139); +#133138 = CARTESIAN_POINT('',(212.910707,-131.175374,1.585)); +#133139 = VECTOR('',#133140,1.); +#133140 = DIRECTION('',(4.242637288657E-03,-0.999990999974,0.)); +#133141 = ORIENTED_EDGE('',*,*,#133142,.T.); +#133142 = EDGE_CURVE('',#133135,#133143,#133145,.T.); +#133143 = VERTEX_POINT('',#133144); +#133144 = CARTESIAN_POINT('',(213.029771,-131.536342,1.585)); +#133145 = LINE('',#133146,#133147); +#133146 = CARTESIAN_POINT('',(212.912232,-131.534817,1.585)); +#133147 = VECTOR('',#133148,1.); +#133148 = DIRECTION('',(0.999915842877,-1.297332511229E-02,0.)); +#133149 = ORIENTED_EDGE('',*,*,#133150,.T.); +#133150 = EDGE_CURVE('',#133143,#133151,#133153,.T.); +#133151 = VERTEX_POINT('',#133152); +#133152 = CARTESIAN_POINT('',(213.029771,-131.692042,1.585)); +#133153 = CIRCLE('',#133154,7.937510771647E-02); +#133154 = AXIS2_PLACEMENT_3D('',#133155,#133156,#133157); +#133155 = CARTESIAN_POINT('',(213.014286,-131.614192,1.585)); +#133156 = DIRECTION('',(0.,0.,-1.)); +#133157 = DIRECTION('',(0.19508634943,0.980786070591,0.)); +#133158 = ORIENTED_EDGE('',*,*,#133159,.T.); +#133159 = EDGE_CURVE('',#133151,#133160,#133162,.T.); +#133160 = VERTEX_POINT('',#133161); +#133161 = CARTESIAN_POINT('',(212.912232,-131.693567,1.585)); +#133162 = LINE('',#133163,#133164); +#133163 = CARTESIAN_POINT('',(213.029771,-131.692042,1.585)); +#133164 = VECTOR('',#133165,1.); +#133165 = DIRECTION('',(-0.999915842877,-1.297332511253E-02,0.)); +#133166 = ORIENTED_EDGE('',*,*,#133167,.T.); +#133167 = EDGE_CURVE('',#133160,#133168,#133170,.T.); +#133168 = VERTEX_POINT('',#133169); +#133169 = CARTESIAN_POINT('',(212.910707,-132.053011,1.585)); +#133170 = LINE('',#133171,#133172); +#133171 = CARTESIAN_POINT('',(212.912232,-131.693567,1.585)); +#133172 = VECTOR('',#133173,1.); +#133173 = DIRECTION('',(-4.242625485537E-03,-0.999991000024,0.)); +#133174 = ORIENTED_EDGE('',*,*,#133175,.T.); +#133175 = EDGE_CURVE('',#133168,#133176,#133178,.T.); +#133176 = VERTEX_POINT('',#133177); +#133177 = CARTESIAN_POINT('',(212.755007,-132.053011,1.585)); +#133178 = CIRCLE('',#133179,7.937510771647E-02); +#133179 = AXIS2_PLACEMENT_3D('',#133180,#133181,#133182); +#133180 = CARTESIAN_POINT('',(212.832857,-132.037526,1.585)); +#133181 = DIRECTION('',(-0.,0.,-1.)); +#133182 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#133183 = ORIENTED_EDGE('',*,*,#133184,.T.); +#133184 = EDGE_CURVE('',#133176,#133185,#133187,.T.); +#133185 = VERTEX_POINT('',#133186); +#133186 = CARTESIAN_POINT('',(212.753482,-131.693567,1.585)); +#133187 = LINE('',#133188,#133189); +#133188 = CARTESIAN_POINT('',(212.755007,-132.053011,1.585)); +#133189 = VECTOR('',#133190,1.); +#133190 = DIRECTION('',(-4.242625485616E-03,0.999991000024,0.)); +#133191 = ORIENTED_EDGE('',*,*,#133192,.T.); +#133192 = EDGE_CURVE('',#133185,#133193,#133195,.T.); +#133193 = VERTEX_POINT('',#133194); +#133194 = CARTESIAN_POINT('',(212.21261,-131.692042,1.585)); +#133195 = LINE('',#133196,#133197); +#133196 = CARTESIAN_POINT('',(212.753482,-131.693567,1.585)); +#133197 = VECTOR('',#133198,1.); +#133198 = DIRECTION('',(-0.999996025174,2.819509862603E-03,0.)); +#133199 = ORIENTED_EDGE('',*,*,#133200,.T.); +#133200 = EDGE_CURVE('',#133193,#133201,#133203,.T.); +#133201 = VERTEX_POINT('',#133202); +#133202 = CARTESIAN_POINT('',(212.152793,-131.589091,1.585)); +#133203 = CIRCLE('',#133204,7.937596479225E-02); +#133204 = AXIS2_PLACEMENT_3D('',#133205,#133206,#133207); +#133205 = CARTESIAN_POINT('',(212.22809584843,-131.6141912948,1.585)); +#133206 = DIRECTION('',(0.,0.,-1.)); +#133207 = DIRECTION('',(-0.195094931792,-0.980784363451,-0.)); +#133208 = ORIENTED_EDGE('',*,*,#133209,.T.); +#133209 = EDGE_CURVE('',#133201,#133210,#133212,.T.); +#133210 = VERTEX_POINT('',#133211); +#133211 = CARTESIAN_POINT('',(212.461518,-130.667741,1.585)); +#133212 = LINE('',#133213,#133214); +#133213 = CARTESIAN_POINT('',(212.152793,-131.589091,1.585)); +#133214 = VECTOR('',#133215,1.); +#133215 = DIRECTION('',(0.317717036574,0.948185575017,0.)); +#133216 = ORIENTED_EDGE('',*,*,#133217,.T.); +#133217 = EDGE_CURVE('',#133210,#133091,#133218,.T.); +#133218 = LINE('',#133219,#133220); +#133219 = CARTESIAN_POINT('',(212.461518,-130.667741,1.585)); +#133220 = VECTOR('',#133221,1.); +#133221 = DIRECTION('',(0.655199704878,0.755455721223,0.)); +#133222 = PLANE('',#133223); +#133223 = AXIS2_PLACEMENT_3D('',#133224,#133225,#133226); +#133224 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133225 = DIRECTION('',(0.,0.,1.)); +#133226 = DIRECTION('',(1.,0.,-0.)); +#133227 = SHELL_BASED_SURFACE_MODEL('',(#133228)); +#133228 = OPEN_SHELL('',(#133229)); +#133229 = ADVANCED_FACE('',(#133230),#133307,.T.); +#133230 = FACE_BOUND('',#133231,.F.); +#133231 = EDGE_LOOP('',(#133232,#133243,#133251,#133260,#133268,#133277, + #133285,#133293,#133301)); +#133232 = ORIENTED_EDGE('',*,*,#133233,.T.); +#133233 = EDGE_CURVE('',#133234,#133236,#133238,.T.); +#133234 = VERTEX_POINT('',#133235); +#133235 = CARTESIAN_POINT('',(117.234761,-131.304606,1.585)); +#133236 = VERTEX_POINT('',#133237); +#133237 = CARTESIAN_POINT('',(117.320152,-131.238335,1.585)); +#133238 = CIRCLE('',#133239,6.499990070433E-02); +#133239 = AXIS2_PLACEMENT_3D('',#133240,#133241,#133242); +#133240 = CARTESIAN_POINT('',(117.29959745813,-131.2999993973,1.585)); +#133241 = DIRECTION('',(0.,0.,-1.)); +#133242 = DIRECTION('',(-0.997485495103,-7.087091829134E-02,-0.)); +#133243 = ORIENTED_EDGE('',*,*,#133244,.T.); +#133244 = EDGE_CURVE('',#133236,#133245,#133247,.T.); +#133245 = VERTEX_POINT('',#133246); +#133246 = CARTESIAN_POINT('',(118.220152,-131.538334,1.585)); +#133247 = LINE('',#133248,#133249); +#133248 = CARTESIAN_POINT('',(117.320152,-131.238335,1.585)); +#133249 = VECTOR('',#133250,1.); +#133250 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#133251 = ORIENTED_EDGE('',*,*,#133252,.T.); +#133252 = EDGE_CURVE('',#133245,#133253,#133255,.T.); +#133253 = VERTEX_POINT('',#133254); +#133254 = CARTESIAN_POINT('',(118.220152,-131.661664,1.585)); +#133255 = CIRCLE('',#133256,6.500111611219E-02); +#133256 = AXIS2_PLACEMENT_3D('',#133257,#133258,#133259); +#133257 = CARTESIAN_POINT('',(118.19959542268,-131.599999,1.585)); +#133258 = DIRECTION('',(0.,0.,-1.)); +#133259 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#133260 = ORIENTED_EDGE('',*,*,#133261,.T.); +#133261 = EDGE_CURVE('',#133253,#133262,#133264,.T.); +#133262 = VERTEX_POINT('',#133263); +#133263 = CARTESIAN_POINT('',(117.320152,-131.961663,1.585)); +#133264 = LINE('',#133265,#133266); +#133265 = CARTESIAN_POINT('',(118.220152,-131.661664,1.585)); +#133266 = VECTOR('',#133267,1.); +#133267 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#133268 = ORIENTED_EDGE('',*,*,#133269,.T.); +#133269 = EDGE_CURVE('',#133262,#133270,#133272,.T.); +#133270 = VERTEX_POINT('',#133271); +#133271 = CARTESIAN_POINT('',(117.279042,-131.838335,1.585)); +#133272 = CIRCLE('',#133273,6.499966862236E-02); +#133273 = AXIS2_PLACEMENT_3D('',#133274,#133275,#133276); +#133274 = CARTESIAN_POINT('',(117.29959712923,-131.8999989569,1.585)); +#133275 = DIRECTION('',(0.,0.,-1.)); +#133276 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#133277 = ORIENTED_EDGE('',*,*,#133278,.T.); +#133278 = EDGE_CURVE('',#133270,#133279,#133281,.T.); +#133279 = VERTEX_POINT('',#133280); +#133280 = CARTESIAN_POINT('',(117.99405,-131.599999,1.585)); +#133281 = LINE('',#133282,#133283); +#133282 = CARTESIAN_POINT('',(117.279042,-131.838335,1.585)); +#133283 = VECTOR('',#133284,1.); +#133284 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#133285 = ORIENTED_EDGE('',*,*,#133286,.T.); +#133286 = EDGE_CURVE('',#133279,#133287,#133289,.T.); +#133287 = VERTEX_POINT('',#133288); +#133288 = CARTESIAN_POINT('',(117.279042,-131.361663,1.585)); +#133289 = LINE('',#133290,#133291); +#133290 = CARTESIAN_POINT('',(117.99405,-131.599999,1.585)); +#133291 = VECTOR('',#133292,1.); +#133292 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#133293 = ORIENTED_EDGE('',*,*,#133294,.T.); +#133294 = EDGE_CURVE('',#133287,#133295,#133297,.T.); +#133295 = VERTEX_POINT('',#133296); +#133296 = CARTESIAN_POINT('',(117.257009,-131.349103,1.585)); +#133297 = LINE('',#133298,#133299); +#133298 = CARTESIAN_POINT('',(117.279042,-131.361663,1.585)); +#133299 = VECTOR('',#133300,1.); +#133300 = DIRECTION('',(-0.868757082859,0.495238458707,0.)); +#133301 = ORIENTED_EDGE('',*,*,#133302,.T.); +#133302 = EDGE_CURVE('',#133295,#133234,#133303,.T.); +#133303 = LINE('',#133304,#133305); +#133304 = CARTESIAN_POINT('',(117.257009,-131.349103,1.585)); +#133305 = VECTOR('',#133306,1.); +#133306 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#133307 = PLANE('',#133308); +#133308 = AXIS2_PLACEMENT_3D('',#133309,#133310,#133311); +#133309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133310 = DIRECTION('',(0.,0.,1.)); +#133311 = DIRECTION('',(1.,0.,-0.)); +#133312 = SHELL_BASED_SURFACE_MODEL('',(#133313)); +#133313 = OPEN_SHELL('',(#133314)); +#133314 = ADVANCED_FACE('',(#133315),#133449,.T.); +#133315 = FACE_BOUND('',#133316,.F.); +#133316 = EDGE_LOOP('',(#133317,#133327,#133335,#133344,#133352,#133360, + #133369,#133377,#133386,#133394,#133402,#133410,#133418,#133427, + #133435,#133443)); +#133317 = ORIENTED_EDGE('',*,*,#133318,.T.); +#133318 = EDGE_CURVE('',#133319,#133321,#133323,.T.); +#133319 = VERTEX_POINT('',#133320); +#133320 = CARTESIAN_POINT('',(203.436181,-130.724941,1.585)); +#133321 = VERTEX_POINT('',#133322); +#133322 = CARTESIAN_POINT('',(203.474637,-130.70436,1.585)); +#133323 = LINE('',#133324,#133325); +#133324 = CARTESIAN_POINT('',(203.436181,-130.724941,1.585)); +#133325 = VECTOR('',#133326,1.); +#133326 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#133327 = ORIENTED_EDGE('',*,*,#133328,.T.); +#133328 = EDGE_CURVE('',#133321,#133329,#133331,.T.); +#133329 = VERTEX_POINT('',#133330); +#133330 = CARTESIAN_POINT('',(203.496474,-130.70436,1.585)); +#133331 = LINE('',#133332,#133333); +#133332 = CARTESIAN_POINT('',(203.474637,-130.70436,1.585)); +#133333 = VECTOR('',#133334,1.); +#133334 = DIRECTION('',(1.,0.,0.)); +#133335 = ORIENTED_EDGE('',*,*,#133336,.T.); +#133336 = EDGE_CURVE('',#133329,#133337,#133339,.T.); +#133337 = VERTEX_POINT('',#133338); +#133338 = CARTESIAN_POINT('',(203.564269,-130.777919,1.585)); +#133339 = CIRCLE('',#133340,7.216898094226E-02); +#133340 = AXIS2_PLACEMENT_3D('',#133341,#133342,#133343); +#133341 = CARTESIAN_POINT('',(203.49211606389,-130.7763972834,1.585)); +#133342 = DIRECTION('',(0.,0.,-1.)); +#133343 = DIRECTION('',(6.038516895267E-02,0.998175150648,0.)); +#133344 = ORIENTED_EDGE('',*,*,#133345,.T.); +#133345 = EDGE_CURVE('',#133337,#133346,#133348,.T.); +#133346 = VERTEX_POINT('',#133347); +#133347 = CARTESIAN_POINT('',(203.564269,-131.702919,1.585)); +#133348 = LINE('',#133349,#133350); +#133349 = CARTESIAN_POINT('',(203.564269,-130.777919,1.585)); +#133350 = VECTOR('',#133351,1.); +#133351 = DIRECTION('',(0.,-1.,0.)); +#133352 = ORIENTED_EDGE('',*,*,#133353,.T.); +#133353 = EDGE_CURVE('',#133346,#133354,#133356,.T.); +#133354 = VERTEX_POINT('',#133355); +#133355 = CARTESIAN_POINT('',(203.789615,-131.70436,1.585)); +#133356 = LINE('',#133357,#133358); +#133357 = CARTESIAN_POINT('',(203.564269,-131.702919,1.585)); +#133358 = VECTOR('',#133359,1.); +#133359 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#133360 = ORIENTED_EDGE('',*,*,#133361,.T.); +#133361 = EDGE_CURVE('',#133354,#133362,#133364,.T.); +#133362 = VERTEX_POINT('',#133363); +#133363 = CARTESIAN_POINT('',(203.774983,-131.852919,1.585)); +#133364 = CIRCLE('',#133365,7.500006711465E-02); +#133365 = AXIS2_PLACEMENT_3D('',#133366,#133367,#133368); +#133366 = CARTESIAN_POINT('',(203.77498306711,-131.7779189328,1.585)); +#133367 = DIRECTION('',(0.,0.,-1.)); +#133368 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#133369 = ORIENTED_EDGE('',*,*,#133370,.T.); +#133370 = EDGE_CURVE('',#133362,#133371,#133373,.T.); +#133371 = VERTEX_POINT('',#133372); +#133372 = CARTESIAN_POINT('',(203.188923,-131.851478,1.585)); +#133373 = LINE('',#133374,#133375); +#133374 = CARTESIAN_POINT('',(203.774983,-131.852919,1.585)); +#133375 = VECTOR('',#133376,1.); +#133376 = DIRECTION('',(-0.999996977183,2.458785182659E-03,0.)); +#133377 = ORIENTED_EDGE('',*,*,#133378,.T.); +#133378 = EDGE_CURVE('',#133371,#133379,#133381,.T.); +#133379 = VERTEX_POINT('',#133380); +#133380 = CARTESIAN_POINT('',(203.203555,-131.702919,1.585)); +#133381 = CIRCLE('',#133382,7.500006711463E-02); +#133382 = AXIS2_PLACEMENT_3D('',#133383,#133384,#133385); +#133383 = CARTESIAN_POINT('',(203.20355493288,-131.7779190671,1.585)); +#133384 = DIRECTION('',(0.,0.,-1.)); +#133385 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#133386 = ORIENTED_EDGE('',*,*,#133387,.T.); +#133387 = EDGE_CURVE('',#133379,#133388,#133390,.T.); +#133388 = VERTEX_POINT('',#133389); +#133389 = CARTESIAN_POINT('',(203.414269,-131.702919,1.585)); +#133390 = LINE('',#133391,#133392); +#133391 = CARTESIAN_POINT('',(203.203555,-131.702919,1.585)); +#133392 = VECTOR('',#133393,1.); +#133393 = DIRECTION('',(1.,0.,0.)); +#133394 = ORIENTED_EDGE('',*,*,#133395,.T.); +#133395 = EDGE_CURVE('',#133388,#133396,#133398,.T.); +#133396 = VERTEX_POINT('',#133397); +#133397 = CARTESIAN_POINT('',(203.414269,-131.006604,1.585)); +#133398 = LINE('',#133399,#133400); +#133399 = CARTESIAN_POINT('',(203.414269,-131.702919,1.585)); +#133400 = VECTOR('',#133401,1.); +#133401 = DIRECTION('',(0.,1.,0.)); +#133402 = ORIENTED_EDGE('',*,*,#133403,.T.); +#133403 = EDGE_CURVE('',#133396,#133404,#133406,.T.); +#133404 = VERTEX_POINT('',#133405); +#133405 = CARTESIAN_POINT('',(203.338633,-131.079131,1.585)); +#133406 = LINE('',#133407,#133408); +#133407 = CARTESIAN_POINT('',(203.414269,-131.006604,1.585)); +#133408 = VECTOR('',#133409,1.); +#133409 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#133410 = ORIENTED_EDGE('',*,*,#133411,.T.); +#133411 = EDGE_CURVE('',#133404,#133412,#133414,.T.); +#133412 = VERTEX_POINT('',#133413); +#133413 = CARTESIAN_POINT('',(203.223364,-131.13597,1.585)); +#133414 = LINE('',#133415,#133416); +#133415 = CARTESIAN_POINT('',(203.338633,-131.079131,1.585)); +#133416 = VECTOR('',#133417,1.); +#133417 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#133418 = ORIENTED_EDGE('',*,*,#133419,.T.); +#133419 = EDGE_CURVE('',#133412,#133420,#133422,.T.); +#133420 = VERTEX_POINT('',#133421); +#133421 = CARTESIAN_POINT('',(203.170014,-130.996551,1.585)); +#133422 = CIRCLE('',#133423,7.50000527236E-02); +#133423 = AXIS2_PLACEMENT_3D('',#133424,#133425,#133426); +#133424 = CARTESIAN_POINT('',(203.20355455676,-131.0636333297,1.585)); +#133425 = DIRECTION('',(0.,0.,-1.)); +#133426 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#133427 = ORIENTED_EDGE('',*,*,#133428,.T.); +#133428 = EDGE_CURVE('',#133420,#133429,#133431,.T.); +#133429 = VERTEX_POINT('',#133430); +#133430 = CARTESIAN_POINT('',(203.254366,-130.954375,1.585)); +#133431 = LINE('',#133432,#133433); +#133432 = CARTESIAN_POINT('',(203.170014,-130.996551,1.585)); +#133433 = VECTOR('',#133434,1.); +#133434 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#133435 = ORIENTED_EDGE('',*,*,#133436,.T.); +#133436 = EDGE_CURVE('',#133429,#133437,#133439,.T.); +#133437 = VERTEX_POINT('',#133438); +#133438 = CARTESIAN_POINT('',(203.335745,-130.872996,1.585)); +#133439 = LINE('',#133440,#133441); +#133440 = CARTESIAN_POINT('',(203.254366,-130.954375,1.585)); +#133441 = VECTOR('',#133442,1.); +#133442 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#133443 = ORIENTED_EDGE('',*,*,#133444,.T.); +#133444 = EDGE_CURVE('',#133437,#133319,#133445,.T.); +#133445 = LINE('',#133446,#133447); +#133446 = CARTESIAN_POINT('',(203.335745,-130.872996,1.585)); +#133447 = VECTOR('',#133448,1.); +#133448 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#133449 = PLANE('',#133450); +#133450 = AXIS2_PLACEMENT_3D('',#133451,#133452,#133453); +#133451 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133452 = DIRECTION('',(0.,0.,1.)); +#133453 = DIRECTION('',(1.,0.,-0.)); +#133454 = SHELL_BASED_SURFACE_MODEL('',(#133455)); +#133455 = OPEN_SHELL('',(#133456)); +#133456 = ADVANCED_FACE('',(#133457),#133576,.T.); +#133457 = FACE_BOUND('',#133458,.F.); +#133458 = EDGE_LOOP('',(#133459,#133470,#133478,#133487,#133495,#133503, + #133512,#133520,#133529,#133537,#133545,#133554,#133562,#133570)); +#133459 = ORIENTED_EDGE('',*,*,#133460,.T.); +#133460 = EDGE_CURVE('',#133461,#133463,#133465,.T.); +#133461 = VERTEX_POINT('',#133462); +#133462 = CARTESIAN_POINT('',(202.819209,-130.72294,1.585)); +#133463 = VERTEX_POINT('',#133464); +#133464 = CARTESIAN_POINT('',(202.943182,-130.795291,1.585)); +#133465 = CIRCLE('',#133466,7.499997880121E-02); +#133466 = AXIS2_PLACEMENT_3D('',#133467,#133468,#133469); +#133467 = CARTESIAN_POINT('',(202.87022162542,-130.7779191675,1.585)); +#133468 = DIRECTION('',(0.,0.,-1.)); +#133469 = DIRECTION('',(-0.680168531213,0.733055774922,0.)); +#133470 = ORIENTED_EDGE('',*,*,#133471,.T.); +#133471 = EDGE_CURVE('',#133463,#133472,#133474,.T.); +#133472 = VERTEX_POINT('',#133473); +#133473 = CARTESIAN_POINT('',(202.700296,-131.809191,1.585)); +#133474 = LINE('',#133475,#133476); +#133475 = CARTESIAN_POINT('',(202.943182,-130.795291,1.585)); +#133476 = VECTOR('',#133477,1.); +#133477 = DIRECTION('',(-0.232964820327,-0.972485163121,0.)); +#133478 = ORIENTED_EDGE('',*,*,#133479,.T.); +#133479 = EDGE_CURVE('',#133472,#133480,#133482,.T.); +#133480 = VERTEX_POINT('',#133481); +#133481 = CARTESIAN_POINT('',(202.559658,-131.797244,1.585)); +#133482 = CIRCLE('',#133483,7.500055331739E-02); +#133483 = AXIS2_PLACEMENT_3D('',#133484,#133485,#133486); +#133484 = CARTESIAN_POINT('',(202.63212608181,-131.7779188837,1.585)); +#133485 = DIRECTION('',(-0.,0.,-1.)); +#133486 = DIRECTION('',(0.908925536853,-0.4169584733,-0.)); +#133487 = ORIENTED_EDGE('',*,*,#133488,.T.); +#133488 = EDGE_CURVE('',#133480,#133489,#133491,.T.); +#133489 = VERTEX_POINT('',#133490); +#133490 = CARTESIAN_POINT('',(202.441649,-131.354713,1.585)); +#133491 = LINE('',#133492,#133493); +#133492 = CARTESIAN_POINT('',(202.559658,-131.797244,1.585)); +#133493 = VECTOR('',#133494,1.); +#133494 = DIRECTION('',(-0.257664145438,0.966234540966,0.)); +#133495 = ORIENTED_EDGE('',*,*,#133496,.T.); +#133496 = EDGE_CURVE('',#133489,#133497,#133499,.T.); +#133497 = VERTEX_POINT('',#133498); +#133498 = CARTESIAN_POINT('',(202.318479,-131.81101,1.585)); +#133499 = LINE('',#133500,#133501); +#133500 = CARTESIAN_POINT('',(202.441649,-131.354713,1.585)); +#133501 = VECTOR('',#133502,1.); +#133502 = DIRECTION('',(-0.260606315218,-0.965445155598,0.)); +#133503 = ORIENTED_EDGE('',*,*,#133504,.T.); +#133504 = EDGE_CURVE('',#133497,#133505,#133507,.T.); +#133505 = VERTEX_POINT('',#133506); +#133506 = CARTESIAN_POINT('',(202.178214,-131.795291,1.585)); +#133507 = CIRCLE('',#133508,7.499976850752E-02); +#133508 = AXIS2_PLACEMENT_3D('',#133509,#133510,#133511); +#133509 = CARTESIAN_POINT('',(202.25117410899,-131.77791896,1.585)); +#133510 = DIRECTION('',(-0.,0.,-1.)); +#133511 = DIRECTION('',(0.897401316583,-0.44121522752,-0.)); +#133512 = ORIENTED_EDGE('',*,*,#133513,.T.); +#133513 = EDGE_CURVE('',#133505,#133514,#133516,.T.); +#133514 = VERTEX_POINT('',#133515); +#133515 = CARTESIAN_POINT('',(201.938131,-130.780723,1.585)); +#133516 = LINE('',#133517,#133518); +#133517 = CARTESIAN_POINT('',(202.178214,-131.795291,1.585)); +#133518 = VECTOR('',#133519,1.); +#133519 = DIRECTION('',(-0.23027618176,0.97312531573,0.)); +#133520 = ORIENTED_EDGE('',*,*,#133521,.T.); +#133521 = EDGE_CURVE('',#133514,#133522,#133524,.T.); +#133522 = VERTEX_POINT('',#133523); +#133523 = CARTESIAN_POINT('',(202.086039,-130.760547,1.585)); +#133524 = CIRCLE('',#133525,7.499999556139E-02); +#133525 = AXIS2_PLACEMENT_3D('',#133526,#133527,#133528); +#133526 = CARTESIAN_POINT('',(202.0130785449,-130.7779185666,1.585)); +#133527 = DIRECTION('',(0.,0.,-1.)); +#133528 = DIRECTION('',(-0.999300657904,-3.739244726397E-02,-0.)); +#133529 = ORIENTED_EDGE('',*,*,#133530,.T.); +#133530 = EDGE_CURVE('',#133522,#133531,#133533,.T.); +#133531 = VERTEX_POINT('',#133532); +#133532 = CARTESIAN_POINT('',(202.25529,-131.471403,1.585)); +#133533 = LINE('',#133534,#133535); +#133534 = CARTESIAN_POINT('',(202.086039,-130.760547,1.585)); +#133535 = VECTOR('',#133536,1.); +#133536 = DIRECTION('',(0.231619972271,-0.972806346836,0.)); +#133537 = ORIENTED_EDGE('',*,*,#133538,.T.); +#133538 = EDGE_CURVE('',#133531,#133539,#133541,.T.); +#133539 = VERTEX_POINT('',#133540); +#133540 = CARTESIAN_POINT('',(202.374345,-131.030541,1.585)); +#133541 = LINE('',#133542,#133543); +#133542 = CARTESIAN_POINT('',(202.25529,-131.471403,1.585)); +#133543 = VECTOR('',#133544,1.); +#133544 = DIRECTION('',(0.260711285702,0.96541681439,0.)); +#133545 = ORIENTED_EDGE('',*,*,#133546,.T.); +#133546 = EDGE_CURVE('',#133539,#133547,#133549,.T.); +#133547 = VERTEX_POINT('',#133548); +#133548 = CARTESIAN_POINT('',(202.514118,-131.044308,1.585)); +#133549 = CIRCLE('',#133550,7.500013992439E-02); +#133550 = AXIS2_PLACEMENT_3D('',#133551,#133552,#133553); +#133551 = CARTESIAN_POINT('',(202.44165014547,-131.0636323641,1.585)); +#133552 = DIRECTION('',(0.,0.,-1.)); +#133553 = DIRECTION('',(-0.897400265457,0.44121736543,0.)); +#133554 = ORIENTED_EDGE('',*,*,#133555,.T.); +#133555 = EDGE_CURVE('',#133547,#133556,#133558,.T.); +#133556 = VERTEX_POINT('',#133557); +#133557 = CARTESIAN_POINT('',(202.628009,-131.471403,1.585)); +#133558 = LINE('',#133559,#133560); +#133559 = CARTESIAN_POINT('',(202.514118,-131.044308,1.585)); +#133560 = VECTOR('',#133561,1.); +#133561 = DIRECTION('',(0.257660538413,-0.966235502838,0.)); +#133562 = ORIENTED_EDGE('',*,*,#133563,.T.); +#133563 = EDGE_CURVE('',#133556,#133564,#133566,.T.); +#133564 = VERTEX_POINT('',#133565); +#133565 = CARTESIAN_POINT('',(202.802052,-130.746647,1.585)); +#133566 = LINE('',#133567,#133568); +#133567 = CARTESIAN_POINT('',(202.628009,-131.471403,1.585)); +#133568 = VECTOR('',#133569,1.); +#133569 = DIRECTION('',(0.233501785734,0.972356372972,0.)); +#133570 = ORIENTED_EDGE('',*,*,#133571,.T.); +#133571 = EDGE_CURVE('',#133564,#133461,#133572,.T.); +#133572 = LINE('',#133573,#133574); +#133573 = CARTESIAN_POINT('',(202.802052,-130.746647,1.585)); +#133574 = VECTOR('',#133575,1.); +#133575 = DIRECTION('',(0.586282529115,0.810106657209,0.)); +#133576 = PLANE('',#133577); +#133577 = AXIS2_PLACEMENT_3D('',#133578,#133579,#133580); +#133578 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133579 = DIRECTION('',(0.,0.,1.)); +#133580 = DIRECTION('',(1.,0.,-0.)); +#133581 = SHELL_BASED_SURFACE_MODEL('',(#133582)); +#133582 = OPEN_SHELL('',(#133583)); +#133583 = ADVANCED_FACE('',(#133584),#133848,.T.); +#133584 = FACE_BOUND('',#133585,.F.); +#133585 = EDGE_LOOP('',(#133586,#133596,#133604,#133612,#133621,#133629, + #133637,#133646,#133654,#133662,#133670,#133678,#133686,#133694, + #133702,#133711,#133719,#133727,#133735,#133743,#133752,#133760, + #133768,#133777,#133785,#133793,#133801,#133809,#133817,#133825, + #133833,#133842)); +#133586 = ORIENTED_EDGE('',*,*,#133587,.T.); +#133587 = EDGE_CURVE('',#133588,#133590,#133592,.T.); +#133588 = VERTEX_POINT('',#133589); +#133589 = CARTESIAN_POINT('',(201.163714,-130.76242,1.585)); +#133590 = VERTEX_POINT('',#133591); +#133591 = CARTESIAN_POINT('',(201.284161,-130.70436,1.585)); +#133592 = LINE('',#133593,#133594); +#133593 = CARTESIAN_POINT('',(201.163714,-130.76242,1.585)); +#133594 = VECTOR('',#133595,1.); +#133595 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#133596 = ORIENTED_EDGE('',*,*,#133597,.T.); +#133597 = EDGE_CURVE('',#133590,#133598,#133600,.T.); +#133598 = VERTEX_POINT('',#133599); +#133599 = CARTESIAN_POINT('',(201.544293,-130.703648,1.585)); +#133600 = LINE('',#133601,#133602); +#133601 = CARTESIAN_POINT('',(201.284161,-130.70436,1.585)); +#133602 = VECTOR('',#133603,1.); +#133603 = DIRECTION('',(0.99999625424,2.737061695754E-03,0.)); +#133604 = ORIENTED_EDGE('',*,*,#133605,.T.); +#133605 = EDGE_CURVE('',#133598,#133606,#133608,.T.); +#133606 = VERTEX_POINT('',#133607); +#133607 = CARTESIAN_POINT('',(201.716887,-130.760381,1.585)); +#133608 = LINE('',#133609,#133610); +#133609 = CARTESIAN_POINT('',(201.544293,-130.703648,1.585)); +#133610 = VECTOR('',#133611,1.); +#133611 = DIRECTION('',(0.949993312755,-0.312270244693,0.)); +#133612 = ORIENTED_EDGE('',*,*,#133613,.T.); +#133613 = EDGE_CURVE('',#133606,#133614,#133616,.T.); +#133614 = VERTEX_POINT('',#133615); +#133615 = CARTESIAN_POINT('',(201.656027,-130.896689,1.585)); +#133616 = CIRCLE('',#133617,7.499990197507E-02); +#133617 = AXIS2_PLACEMENT_3D('',#133618,#133619,#133620); +#133618 = CARTESIAN_POINT('',(201.67974495478,-130.8255381467,1.585)); +#133619 = DIRECTION('',(0.,0.,-1.)); +#133620 = DIRECTION('',(0.495227916748,0.86876309226,0.)); +#133621 = ORIENTED_EDGE('',*,*,#133622,.T.); +#133622 = EDGE_CURVE('',#133614,#133623,#133625,.T.); +#133623 = VERTEX_POINT('',#133624); +#133624 = CARTESIAN_POINT('',(201.524718,-130.852919,1.585)); +#133625 = LINE('',#133626,#133627); +#133626 = CARTESIAN_POINT('',(201.656027,-130.896689,1.585)); +#133627 = VECTOR('',#133628,1.); +#133628 = DIRECTION('',(-0.948682575567,0.316229933459,0.)); +#133629 = ORIENTED_EDGE('',*,*,#133630,.T.); +#133630 = EDGE_CURVE('',#133623,#133631,#133633,.T.); +#133631 = VERTEX_POINT('',#133632); +#133632 = CARTESIAN_POINT('',(201.316498,-130.852919,1.585)); +#133633 = LINE('',#133634,#133635); +#133634 = CARTESIAN_POINT('',(201.524718,-130.852919,1.585)); +#133635 = VECTOR('',#133636,1.); +#133636 = DIRECTION('',(-1.,0.,0.)); +#133637 = ORIENTED_EDGE('',*,*,#133638,.T.); +#133638 = EDGE_CURVE('',#133631,#133639,#133641,.T.); +#133639 = VERTEX_POINT('',#133640); +#133640 = CARTESIAN_POINT('',(201.183317,-130.9861,1.585)); +#133641 = CIRCLE('',#133642,0.18686440374); +#133642 = AXIS2_PLACEMENT_3D('',#133643,#133644,#133645); +#133643 = CARTESIAN_POINT('',(201.364034,-131.033636,1.585)); +#133644 = DIRECTION('',(0.,0.,1.)); +#133645 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#133646 = ORIENTED_EDGE('',*,*,#133647,.T.); +#133647 = EDGE_CURVE('',#133639,#133648,#133650,.T.); +#133648 = VERTEX_POINT('',#133649); +#133649 = CARTESIAN_POINT('',(201.183317,-131.045928,1.585)); +#133650 = LINE('',#133651,#133652); +#133651 = CARTESIAN_POINT('',(201.183317,-130.9861,1.585)); +#133652 = VECTOR('',#133653,1.); +#133653 = DIRECTION('',(0.,-1.,0.)); +#133654 = ORIENTED_EDGE('',*,*,#133655,.T.); +#133655 = EDGE_CURVE('',#133648,#133656,#133658,.T.); +#133656 = VERTEX_POINT('',#133657); +#133657 = CARTESIAN_POINT('',(201.217575,-131.114444,1.585)); +#133658 = LINE('',#133659,#133660); +#133659 = CARTESIAN_POINT('',(201.183317,-131.045928,1.585)); +#133660 = VECTOR('',#133661,1.); +#133661 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#133662 = ORIENTED_EDGE('',*,*,#133663,.T.); +#133663 = EDGE_CURVE('',#133656,#133664,#133666,.T.); +#133664 = VERTEX_POINT('',#133665); +#133665 = CARTESIAN_POINT('',(201.247982,-131.144851,1.585)); +#133666 = LINE('',#133667,#133668); +#133667 = CARTESIAN_POINT('',(201.217575,-131.114444,1.585)); +#133668 = VECTOR('',#133669,1.); +#133669 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#133670 = ORIENTED_EDGE('',*,*,#133671,.T.); +#133671 = EDGE_CURVE('',#133664,#133672,#133674,.T.); +#133672 = VERTEX_POINT('',#133673); +#133673 = CARTESIAN_POINT('',(201.324969,-131.183344,1.585)); +#133674 = LINE('',#133675,#133676); +#133675 = CARTESIAN_POINT('',(201.247982,-131.144851,1.585)); +#133676 = VECTOR('',#133677,1.); +#133677 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#133678 = ORIENTED_EDGE('',*,*,#133679,.T.); +#133679 = EDGE_CURVE('',#133672,#133680,#133682,.T.); +#133680 = VERTEX_POINT('',#133681); +#133681 = CARTESIAN_POINT('',(201.52281,-131.234646,1.585)); +#133682 = LINE('',#133683,#133684); +#133683 = CARTESIAN_POINT('',(201.324969,-131.183344,1.585)); +#133684 = VECTOR('',#133685,1.); +#133685 = DIRECTION('',(0.967985143201,-0.251007494991,0.)); +#133686 = ORIENTED_EDGE('',*,*,#133687,.T.); +#133687 = EDGE_CURVE('',#133680,#133688,#133690,.T.); +#133688 = VERTEX_POINT('',#133689); +#133689 = CARTESIAN_POINT('',(201.63179,-131.291595,1.585)); +#133690 = LINE('',#133691,#133692); +#133691 = CARTESIAN_POINT('',(201.52281,-131.234646,1.585)); +#133692 = VECTOR('',#133693,1.); +#133693 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#133694 = ORIENTED_EDGE('',*,*,#133695,.T.); +#133695 = EDGE_CURVE('',#133688,#133696,#133698,.T.); +#133696 = VERTEX_POINT('',#133697); +#133697 = CARTESIAN_POINT('',(201.695243,-131.357125,1.585)); +#133698 = LINE('',#133699,#133700); +#133699 = CARTESIAN_POINT('',(201.63179,-131.291595,1.585)); +#133700 = VECTOR('',#133701,1.); +#133701 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#133702 = ORIENTED_EDGE('',*,*,#133703,.T.); +#133703 = EDGE_CURVE('',#133696,#133704,#133706,.T.); +#133704 = VERTEX_POINT('',#133705); +#133705 = CARTESIAN_POINT('',(201.689877,-131.729963,1.585)); +#133706 = CIRCLE('',#133707,0.290999251663); +#133707 = AXIS2_PLACEMENT_3D('',#133708,#133709,#133710); +#133708 = CARTESIAN_POINT('',(201.4691523369,-131.5403286477,1.585)); +#133709 = DIRECTION('',(0.,0.,-1.)); +#133710 = DIRECTION('',(0.776945857418,0.629567418662,0.)); +#133711 = ORIENTED_EDGE('',*,*,#133712,.T.); +#133712 = EDGE_CURVE('',#133704,#133713,#133715,.T.); +#133713 = VERTEX_POINT('',#133714); +#133714 = CARTESIAN_POINT('',(201.624347,-131.793417,1.585)); +#133715 = LINE('',#133716,#133717); +#133716 = CARTESIAN_POINT('',(201.689877,-131.729963,1.585)); +#133717 = VECTOR('',#133718,1.); +#133718 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#133719 = ORIENTED_EDGE('',*,*,#133720,.T.); +#133720 = EDGE_CURVE('',#133713,#133721,#133723,.T.); +#133721 = VERTEX_POINT('',#133722); +#133722 = CARTESIAN_POINT('',(201.503901,-131.851478,1.585)); +#133723 = LINE('',#133724,#133725); +#133724 = CARTESIAN_POINT('',(201.624347,-131.793417,1.585)); +#133725 = VECTOR('',#133726,1.); +#133726 = DIRECTION('',(-0.900801384651,-0.434231350101,0.)); +#133727 = ORIENTED_EDGE('',*,*,#133728,.T.); +#133728 = EDGE_CURVE('',#133721,#133729,#133731,.T.); +#133729 = VERTEX_POINT('',#133730); +#133730 = CARTESIAN_POINT('',(201.234711,-131.850719,1.585)); +#133731 = LINE('',#133732,#133733); +#133732 = CARTESIAN_POINT('',(201.503901,-131.851478,1.585)); +#133733 = VECTOR('',#133734,1.); +#133734 = DIRECTION('',(-0.999996025037,2.819558612842E-03,0.)); +#133735 = ORIENTED_EDGE('',*,*,#133736,.T.); +#133736 = EDGE_CURVE('',#133729,#133737,#133739,.T.); +#133737 = VERTEX_POINT('',#133738); +#133738 = CARTESIAN_POINT('',(201.071174,-131.795457,1.585)); +#133739 = LINE('',#133740,#133741); +#133740 = CARTESIAN_POINT('',(201.234711,-131.850719,1.585)); +#133741 = VECTOR('',#133742,1.); +#133742 = DIRECTION('',(-0.94737239725,0.320133629801,0.)); +#133743 = ORIENTED_EDGE('',*,*,#133744,.T.); +#133744 = EDGE_CURVE('',#133737,#133745,#133747,.T.); +#133745 = VERTEX_POINT('',#133746); +#133746 = CARTESIAN_POINT('',(201.132034,-131.659149,1.585)); +#133747 = CIRCLE('',#133748,7.500001519549E-02); +#133748 = AXIS2_PLACEMENT_3D('',#133749,#133750,#133751); +#133749 = CARTESIAN_POINT('',(201.10831709996,-131.7303003241,1.585)); +#133750 = DIRECTION('',(0.,0.,-1.)); +#133751 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#133752 = ORIENTED_EDGE('',*,*,#133753,.T.); +#133753 = EDGE_CURVE('',#133745,#133754,#133756,.T.); +#133754 = VERTEX_POINT('',#133755); +#133755 = CARTESIAN_POINT('',(201.263344,-131.702919,1.585)); +#133756 = LINE('',#133757,#133758); +#133757 = CARTESIAN_POINT('',(201.132034,-131.659149,1.585)); +#133758 = VECTOR('',#133759,1.); +#133759 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#133760 = ORIENTED_EDGE('',*,*,#133761,.T.); +#133761 = EDGE_CURVE('',#133754,#133762,#133764,.T.); +#133762 = VERTEX_POINT('',#133763); +#133763 = CARTESIAN_POINT('',(201.471564,-131.702919,1.585)); +#133764 = LINE('',#133765,#133766); +#133765 = CARTESIAN_POINT('',(201.263344,-131.702919,1.585)); +#133766 = VECTOR('',#133767,1.); +#133767 = DIRECTION('',(1.,0.,0.)); +#133768 = ORIENTED_EDGE('',*,*,#133769,.T.); +#133769 = EDGE_CURVE('',#133762,#133770,#133772,.T.); +#133770 = VERTEX_POINT('',#133771); +#133771 = CARTESIAN_POINT('',(201.604745,-131.569737,1.585)); +#133772 = CIRCLE('',#133773,0.186867760544); +#133773 = AXIS2_PLACEMENT_3D('',#133774,#133775,#133776); +#133774 = CARTESIAN_POINT('',(201.42402496928,-131.5221993262,1.585)); +#133775 = DIRECTION('',(0.,0.,1.)); +#133776 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#133777 = ORIENTED_EDGE('',*,*,#133778,.T.); +#133778 = EDGE_CURVE('',#133770,#133779,#133781,.T.); +#133779 = VERTEX_POINT('',#133780); +#133780 = CARTESIAN_POINT('',(201.604745,-131.509909,1.585)); +#133781 = LINE('',#133782,#133783); +#133782 = CARTESIAN_POINT('',(201.604745,-131.569737,1.585)); +#133783 = VECTOR('',#133784,1.); +#133784 = DIRECTION('',(0.,1.,0.)); +#133785 = ORIENTED_EDGE('',*,*,#133786,.T.); +#133786 = EDGE_CURVE('',#133779,#133787,#133789,.T.); +#133787 = VERTEX_POINT('',#133788); +#133788 = CARTESIAN_POINT('',(201.570487,-131.441393,1.585)); +#133789 = LINE('',#133790,#133791); +#133790 = CARTESIAN_POINT('',(201.604745,-131.509909,1.585)); +#133791 = VECTOR('',#133792,1.); +#133792 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#133793 = ORIENTED_EDGE('',*,*,#133794,.T.); +#133794 = EDGE_CURVE('',#133787,#133795,#133797,.T.); +#133795 = VERTEX_POINT('',#133796); +#133796 = CARTESIAN_POINT('',(201.54008,-131.410986,1.585)); +#133797 = LINE('',#133798,#133799); +#133798 = CARTESIAN_POINT('',(201.570487,-131.441393,1.585)); +#133799 = VECTOR('',#133800,1.); +#133800 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#133801 = ORIENTED_EDGE('',*,*,#133802,.T.); +#133802 = EDGE_CURVE('',#133795,#133803,#133805,.T.); +#133803 = VERTEX_POINT('',#133804); +#133804 = CARTESIAN_POINT('',(201.463093,-131.372492,1.585)); +#133805 = LINE('',#133806,#133807); +#133806 = CARTESIAN_POINT('',(201.54008,-131.410986,1.585)); +#133807 = VECTOR('',#133808,1.); +#133808 = DIRECTION('',(-0.894424867414,0.447218242642,0.)); +#133809 = ORIENTED_EDGE('',*,*,#133810,.T.); +#133810 = EDGE_CURVE('',#133803,#133811,#133813,.T.); +#133811 = VERTEX_POINT('',#133812); +#133812 = CARTESIAN_POINT('',(201.265252,-131.321191,1.585)); +#133813 = LINE('',#133814,#133815); +#133814 = CARTESIAN_POINT('',(201.463093,-131.372492,1.585)); +#133815 = VECTOR('',#133816,1.); +#133816 = DIRECTION('',(-0.967986331989,0.251002910506,0.)); +#133817 = ORIENTED_EDGE('',*,*,#133818,.T.); +#133818 = EDGE_CURVE('',#133811,#133819,#133821,.T.); +#133819 = VERTEX_POINT('',#133820); +#133820 = CARTESIAN_POINT('',(201.156271,-131.264241,1.585)); +#133821 = LINE('',#133822,#133823); +#133822 = CARTESIAN_POINT('',(201.265252,-131.321191,1.585)); +#133823 = VECTOR('',#133824,1.); +#133824 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#133825 = ORIENTED_EDGE('',*,*,#133826,.T.); +#133826 = EDGE_CURVE('',#133819,#133827,#133829,.T.); +#133827 = VERTEX_POINT('',#133828); +#133828 = CARTESIAN_POINT('',(201.092818,-131.198711,1.585)); +#133829 = LINE('',#133830,#133831); +#133830 = CARTESIAN_POINT('',(201.156271,-131.264241,1.585)); +#133831 = VECTOR('',#133832,1.); +#133832 = DIRECTION('',(-0.695630129574,0.718400113327,0.)); +#133833 = ORIENTED_EDGE('',*,*,#133834,.T.); +#133834 = EDGE_CURVE('',#133827,#133835,#133837,.T.); +#133835 = VERTEX_POINT('',#133836); +#133836 = CARTESIAN_POINT('',(201.098184,-130.825873,1.585)); +#133837 = CIRCLE('',#133838,0.291002094877); +#133838 = AXIS2_PLACEMENT_3D('',#133839,#133840,#133841); +#133839 = CARTESIAN_POINT('',(201.31891236573,-131.0155074055,1.585)); +#133840 = DIRECTION('',(0.,0.,-1.)); +#133841 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#133842 = ORIENTED_EDGE('',*,*,#133843,.T.); +#133843 = EDGE_CURVE('',#133835,#133588,#133844,.T.); +#133844 = LINE('',#133845,#133846); +#133845 = CARTESIAN_POINT('',(201.098184,-130.825873,1.585)); +#133846 = VECTOR('',#133847,1.); +#133847 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#133848 = PLANE('',#133849); +#133849 = AXIS2_PLACEMENT_3D('',#133850,#133851,#133852); +#133850 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133851 = DIRECTION('',(0.,0.,1.)); +#133852 = DIRECTION('',(1.,0.,-0.)); +#133853 = SHELL_BASED_SURFACE_MODEL('',(#133854)); +#133854 = OPEN_SHELL('',(#133855)); +#133855 = ADVANCED_FACE('',(#133856,#133957),#134032,.T.); +#133856 = FACE_BOUND('',#133857,.F.); +#133857 = EDGE_LOOP('',(#133858,#133869,#133877,#133885,#133893,#133901, + #133909,#133918,#133926,#133935,#133943,#133951)); +#133858 = ORIENTED_EDGE('',*,*,#133859,.T.); +#133859 = EDGE_CURVE('',#133860,#133862,#133864,.T.); +#133860 = VERTEX_POINT('',#133861); +#133861 = CARTESIAN_POINT('',(127.55087,-131.033961,1.585)); +#133862 = VERTEX_POINT('',#133863); +#133863 = CARTESIAN_POINT('',(127.981693,-130.936552,1.585)); +#133864 = CIRCLE('',#133865,0.670538401945); +#133865 = AXIS2_PLACEMENT_3D('',#133866,#133867,#133868); +#133866 = CARTESIAN_POINT('',(127.90590657351,-131.6027938224,1.585)); +#133867 = DIRECTION('',(0.,0.,-1.)); +#133868 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#133869 = ORIENTED_EDGE('',*,*,#133870,.T.); +#133870 = EDGE_CURVE('',#133862,#133871,#133873,.T.); +#133871 = VERTEX_POINT('',#133872); +#133872 = CARTESIAN_POINT('',(128.17438,-130.984718,1.585)); +#133873 = LINE('',#133874,#133875); +#133874 = CARTESIAN_POINT('',(127.981693,-130.936552,1.585)); +#133875 = VECTOR('',#133876,1.); +#133876 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#133877 = ORIENTED_EDGE('',*,*,#133878,.T.); +#133878 = EDGE_CURVE('',#133871,#133879,#133881,.T.); +#133879 = VERTEX_POINT('',#133880); +#133880 = CARTESIAN_POINT('',(128.276987,-131.039751,1.585)); +#133881 = LINE('',#133882,#133883); +#133882 = CARTESIAN_POINT('',(128.17438,-130.984718,1.585)); +#133883 = VECTOR('',#133884,1.); +#133884 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#133885 = ORIENTED_EDGE('',*,*,#133886,.T.); +#133886 = EDGE_CURVE('',#133879,#133887,#133889,.T.); +#133887 = VERTEX_POINT('',#133888); +#133888 = CARTESIAN_POINT('',(128.370999,-131.137884,1.585)); +#133889 = LINE('',#133890,#133891); +#133890 = CARTESIAN_POINT('',(128.276987,-131.039751,1.585)); +#133891 = VECTOR('',#133892,1.); +#133892 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#133893 = ORIENTED_EDGE('',*,*,#133894,.T.); +#133894 = EDGE_CURVE('',#133887,#133895,#133897,.T.); +#133895 = VERTEX_POINT('',#133896); +#133896 = CARTESIAN_POINT('',(128.422563,-131.289776,1.585)); +#133897 = LINE('',#133898,#133899); +#133898 = CARTESIAN_POINT('',(128.370999,-131.137884,1.585)); +#133899 = VECTOR('',#133900,1.); +#133900 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#133901 = ORIENTED_EDGE('',*,*,#133902,.T.); +#133902 = EDGE_CURVE('',#133895,#133903,#133905,.T.); +#133903 = VERTEX_POINT('',#133904); +#133904 = CARTESIAN_POINT('',(128.424597,-131.514285,1.585)); +#133905 = LINE('',#133906,#133907); +#133906 = CARTESIAN_POINT('',(128.422563,-131.289776,1.585)); +#133907 = VECTOR('',#133908,1.); +#133908 = DIRECTION('',(9.059398644849E-03,-0.999958962806,0.)); +#133909 = ORIENTED_EDGE('',*,*,#133910,.T.); +#133910 = EDGE_CURVE('',#133903,#133911,#133913,.T.); +#133911 = VERTEX_POINT('',#133912); +#133912 = CARTESIAN_POINT('',(128.359597,-131.579285,1.585)); +#133913 = CIRCLE('',#133914,6.50010393539E-02); +#133914 = AXIS2_PLACEMENT_3D('',#133915,#133916,#133917); +#133915 = CARTESIAN_POINT('',(128.35959596065,-131.5142839606,1.585)); +#133916 = DIRECTION('',(0.,0.,-1.)); +#133917 = DIRECTION('',(0.999999999872,-1.598967649219E-05,0.)); +#133918 = ORIENTED_EDGE('',*,*,#133919,.T.); +#133919 = EDGE_CURVE('',#133911,#133920,#133922,.T.); +#133920 = VERTEX_POINT('',#133921); +#133921 = CARTESIAN_POINT('',(127.459597,-131.579285,1.585)); +#133922 = LINE('',#133923,#133924); +#133923 = CARTESIAN_POINT('',(128.359597,-131.579285,1.585)); +#133924 = VECTOR('',#133925,1.); +#133925 = DIRECTION('',(-1.,0.,0.)); +#133926 = ORIENTED_EDGE('',*,*,#133927,.T.); +#133927 = EDGE_CURVE('',#133920,#133928,#133930,.T.); +#133928 = VERTEX_POINT('',#133929); +#133929 = CARTESIAN_POINT('',(127.394597,-131.514285,1.585)); +#133930 = CIRCLE('',#133931,6.500103935386E-02); +#133931 = AXIS2_PLACEMENT_3D('',#133932,#133933,#133934); +#133932 = CARTESIAN_POINT('',(127.45959803934,-131.5142839606,1.585)); +#133933 = DIRECTION('',(0.,0.,-1.)); +#133934 = DIRECTION('',(-1.59896756177E-05,-0.999999999872,-0.)); +#133935 = ORIENTED_EDGE('',*,*,#133936,.T.); +#133936 = EDGE_CURVE('',#133928,#133937,#133939,.T.); +#133937 = VERTEX_POINT('',#133938); +#133938 = CARTESIAN_POINT('',(127.39663,-131.289776,1.585)); +#133939 = LINE('',#133940,#133941); +#133940 = CARTESIAN_POINT('',(127.394597,-131.514285,1.585)); +#133941 = VECTOR('',#133942,1.); +#133942 = DIRECTION('',(9.054945028443E-03,0.999959003145,0.)); +#133943 = ORIENTED_EDGE('',*,*,#133944,.T.); +#133944 = EDGE_CURVE('',#133937,#133945,#133947,.T.); +#133945 = VERTEX_POINT('',#133946); +#133946 = CARTESIAN_POINT('',(127.448191,-131.137888,1.585)); +#133947 = LINE('',#133948,#133949); +#133948 = CARTESIAN_POINT('',(127.39663,-131.289776,1.585)); +#133949 = VECTOR('',#133950,1.); +#133950 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#133951 = ORIENTED_EDGE('',*,*,#133952,.T.); +#133952 = EDGE_CURVE('',#133945,#133860,#133953,.T.); +#133953 = LINE('',#133954,#133955); +#133954 = CARTESIAN_POINT('',(127.448191,-131.137888,1.585)); +#133955 = VECTOR('',#133956,1.); +#133956 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#133957 = FACE_BOUND('',#133958,.F.); +#133958 = EDGE_LOOP('',(#133959,#133970,#133978,#133986,#133994,#134002, + #134010,#134018,#134026)); +#133959 = ORIENTED_EDGE('',*,*,#133960,.T.); +#133960 = EDGE_CURVE('',#133961,#133963,#133965,.T.); +#133961 = VERTEX_POINT('',#133962); +#133962 = CARTESIAN_POINT('',(128.122622,-131.104184,1.585)); +#133963 = VERTEX_POINT('',#133964); +#133964 = CARTESIAN_POINT('',(127.626669,-131.139134,1.585)); +#133965 = CIRCLE('',#133966,0.559258743581); +#133966 = AXIS2_PLACEMENT_3D('',#133967,#133968,#133969); +#133967 = CARTESIAN_POINT('',(127.90986183298,-131.6213913603,1.585)); +#133968 = DIRECTION('',(0.,0.,1.)); +#133969 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#133970 = ORIENTED_EDGE('',*,*,#133971,.T.); +#133971 = EDGE_CURVE('',#133963,#133972,#133974,.T.); +#133972 = VERTEX_POINT('',#133973); +#133973 = CARTESIAN_POINT('',(127.559265,-131.20654,1.585)); +#133974 = LINE('',#133975,#133976); +#133975 = CARTESIAN_POINT('',(127.626669,-131.139134,1.585)); +#133976 = VECTOR('',#133977,1.); +#133977 = DIRECTION('',(-0.707096290689,-0.707117271529,0.)); +#133978 = ORIENTED_EDGE('',*,*,#133979,.T.); +#133979 = EDGE_CURVE('',#133972,#133980,#133982,.T.); +#133980 = VERTEX_POINT('',#133981); +#133981 = CARTESIAN_POINT('',(127.524597,-131.310546,1.585)); +#133982 = LINE('',#133983,#133984); +#133983 = CARTESIAN_POINT('',(127.559265,-131.20654,1.585)); +#133984 = VECTOR('',#133985,1.); +#133985 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#133986 = ORIENTED_EDGE('',*,*,#133987,.T.); +#133987 = EDGE_CURVE('',#133980,#133988,#133990,.T.); +#133988 = VERTEX_POINT('',#133989); +#133989 = CARTESIAN_POINT('',(127.524597,-131.449285,1.585)); +#133990 = LINE('',#133991,#133992); +#133991 = CARTESIAN_POINT('',(127.524597,-131.310546,1.585)); +#133992 = VECTOR('',#133993,1.); +#133993 = DIRECTION('',(0.,-1.,0.)); +#133994 = ORIENTED_EDGE('',*,*,#133995,.T.); +#133995 = EDGE_CURVE('',#133988,#133996,#133998,.T.); +#133996 = VERTEX_POINT('',#133997); +#133997 = CARTESIAN_POINT('',(128.294597,-131.449285,1.585)); +#133998 = LINE('',#133999,#134000); +#133999 = CARTESIAN_POINT('',(127.524597,-131.449285,1.585)); +#134000 = VECTOR('',#134001,1.); +#134001 = DIRECTION('',(1.,0.,0.)); +#134002 = ORIENTED_EDGE('',*,*,#134003,.T.); +#134003 = EDGE_CURVE('',#133996,#134004,#134006,.T.); +#134004 = VERTEX_POINT('',#134005); +#134005 = CARTESIAN_POINT('',(128.294597,-131.310546,1.585)); +#134006 = LINE('',#134007,#134008); +#134007 = CARTESIAN_POINT('',(128.294597,-131.449285,1.585)); +#134008 = VECTOR('',#134009,1.); +#134009 = DIRECTION('',(0.,1.,0.)); +#134010 = ORIENTED_EDGE('',*,*,#134011,.T.); +#134011 = EDGE_CURVE('',#134004,#134012,#134014,.T.); +#134012 = VERTEX_POINT('',#134013); +#134013 = CARTESIAN_POINT('',(128.259928,-131.20654,1.585)); +#134014 = LINE('',#134015,#134016); +#134015 = CARTESIAN_POINT('',(128.294597,-131.310546,1.585)); +#134016 = VECTOR('',#134017,1.); +#134017 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#134018 = ORIENTED_EDGE('',*,*,#134019,.T.); +#134019 = EDGE_CURVE('',#134012,#134020,#134022,.T.); +#134020 = VERTEX_POINT('',#134021); +#134021 = CARTESIAN_POINT('',(128.192522,-131.139134,1.585)); +#134022 = LINE('',#134023,#134024); +#134023 = CARTESIAN_POINT('',(128.259928,-131.20654,1.585)); +#134024 = VECTOR('',#134025,1.); +#134025 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#134026 = ORIENTED_EDGE('',*,*,#134027,.T.); +#134027 = EDGE_CURVE('',#134020,#133961,#134028,.T.); +#134028 = LINE('',#134029,#134030); +#134029 = CARTESIAN_POINT('',(128.192522,-131.139134,1.585)); +#134030 = VECTOR('',#134031,1.); +#134031 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#134032 = PLANE('',#134033); +#134033 = AXIS2_PLACEMENT_3D('',#134034,#134035,#134036); +#134034 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134035 = DIRECTION('',(0.,0.,1.)); +#134036 = DIRECTION('',(1.,0.,-0.)); +#134037 = SHELL_BASED_SURFACE_MODEL('',(#134038)); +#134038 = OPEN_SHELL('',(#134039)); +#134039 = ADVANCED_FACE('',(#134040),#134117,.T.); +#134040 = FACE_BOUND('',#134041,.F.); +#134041 = EDGE_LOOP('',(#134042,#134053,#134061,#134070,#134078,#134087, + #134095,#134103,#134111)); +#134042 = ORIENTED_EDGE('',*,*,#134043,.T.); +#134043 = EDGE_CURVE('',#134044,#134046,#134048,.T.); +#134044 = VERTEX_POINT('',#134045); +#134045 = CARTESIAN_POINT('',(124.854761,-130.733178,1.585)); +#134046 = VERTEX_POINT('',#134047); +#134047 = CARTESIAN_POINT('',(124.940152,-130.666907,1.585)); +#134048 = CIRCLE('',#134049,6.499990070437E-02); +#134049 = AXIS2_PLACEMENT_3D('',#134050,#134051,#134052); +#134050 = CARTESIAN_POINT('',(124.91959745813,-130.7285713973,1.585)); +#134051 = DIRECTION('',(0.,0.,-1.)); +#134052 = DIRECTION('',(-0.997485495103,-7.087091829045E-02,-0.)); +#134053 = ORIENTED_EDGE('',*,*,#134054,.T.); +#134054 = EDGE_CURVE('',#134046,#134055,#134057,.T.); +#134055 = VERTEX_POINT('',#134056); +#134056 = CARTESIAN_POINT('',(125.840152,-130.966906,1.585)); +#134057 = LINE('',#134058,#134059); +#134058 = CARTESIAN_POINT('',(124.940152,-130.666907,1.585)); +#134059 = VECTOR('',#134060,1.); +#134060 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#134061 = ORIENTED_EDGE('',*,*,#134062,.T.); +#134062 = EDGE_CURVE('',#134055,#134063,#134065,.T.); +#134063 = VERTEX_POINT('',#134064); +#134064 = CARTESIAN_POINT('',(125.840152,-131.090236,1.585)); +#134065 = CIRCLE('',#134066,6.500111611218E-02); +#134066 = AXIS2_PLACEMENT_3D('',#134067,#134068,#134069); +#134067 = CARTESIAN_POINT('',(125.81959542268,-131.028571,1.585)); +#134068 = DIRECTION('',(0.,0.,-1.)); +#134069 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#134070 = ORIENTED_EDGE('',*,*,#134071,.T.); +#134071 = EDGE_CURVE('',#134063,#134072,#134074,.T.); +#134072 = VERTEX_POINT('',#134073); +#134073 = CARTESIAN_POINT('',(124.940152,-131.390235,1.585)); +#134074 = LINE('',#134075,#134076); +#134075 = CARTESIAN_POINT('',(125.840152,-131.090236,1.585)); +#134076 = VECTOR('',#134077,1.); +#134077 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#134078 = ORIENTED_EDGE('',*,*,#134079,.T.); +#134079 = EDGE_CURVE('',#134072,#134080,#134082,.T.); +#134080 = VERTEX_POINT('',#134081); +#134081 = CARTESIAN_POINT('',(124.899042,-131.266907,1.585)); +#134082 = CIRCLE('',#134083,6.499966862237E-02); +#134083 = AXIS2_PLACEMENT_3D('',#134084,#134085,#134086); +#134084 = CARTESIAN_POINT('',(124.91959712923,-131.3285709569,1.585)); +#134085 = DIRECTION('',(0.,0.,-1.)); +#134086 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#134087 = ORIENTED_EDGE('',*,*,#134088,.T.); +#134088 = EDGE_CURVE('',#134080,#134089,#134091,.T.); +#134089 = VERTEX_POINT('',#134090); +#134090 = CARTESIAN_POINT('',(125.61405,-131.028571,1.585)); +#134091 = LINE('',#134092,#134093); +#134092 = CARTESIAN_POINT('',(124.899042,-131.266907,1.585)); +#134093 = VECTOR('',#134094,1.); +#134094 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#134095 = ORIENTED_EDGE('',*,*,#134096,.T.); +#134096 = EDGE_CURVE('',#134089,#134097,#134099,.T.); +#134097 = VERTEX_POINT('',#134098); +#134098 = CARTESIAN_POINT('',(124.899042,-130.790235,1.585)); +#134099 = LINE('',#134100,#134101); +#134100 = CARTESIAN_POINT('',(125.61405,-131.028571,1.585)); +#134101 = VECTOR('',#134102,1.); +#134102 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#134103 = ORIENTED_EDGE('',*,*,#134104,.T.); +#134104 = EDGE_CURVE('',#134097,#134105,#134107,.T.); +#134105 = VERTEX_POINT('',#134106); +#134106 = CARTESIAN_POINT('',(124.877009,-130.777675,1.585)); +#134107 = LINE('',#134108,#134109); +#134108 = CARTESIAN_POINT('',(124.899042,-130.790235,1.585)); +#134109 = VECTOR('',#134110,1.); +#134110 = DIRECTION('',(-0.868757082858,0.495238458708,0.)); +#134111 = ORIENTED_EDGE('',*,*,#134112,.T.); +#134112 = EDGE_CURVE('',#134105,#134044,#134113,.T.); +#134113 = LINE('',#134114,#134115); +#134114 = CARTESIAN_POINT('',(124.877009,-130.777675,1.585)); +#134115 = VECTOR('',#134116,1.); +#134116 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#134117 = PLANE('',#134118); +#134118 = AXIS2_PLACEMENT_3D('',#134119,#134120,#134121); +#134119 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134120 = DIRECTION('',(0.,0.,1.)); +#134121 = DIRECTION('',(1.,0.,-0.)); +#134122 = SHELL_BASED_SURFACE_MODEL('',(#134123)); +#134123 = OPEN_SHELL('',(#134124)); +#134124 = ADVANCED_FACE('',(#134125),#134311,.T.); +#134125 = FACE_BOUND('',#134126,.F.); +#134126 = EDGE_LOOP('',(#134127,#134138,#134146,#134154,#134162,#134170, + #134179,#134187,#134196,#134204,#134213,#134221,#134230,#134238, + #134246,#134254,#134263,#134271,#134279,#134288,#134296,#134305)); +#134127 = ORIENTED_EDGE('',*,*,#134128,.T.); +#134128 = EDGE_CURVE('',#134129,#134131,#134133,.T.); +#134129 = VERTEX_POINT('',#134130); +#134130 = CARTESIAN_POINT('',(117.580369,-130.685342,1.585)); +#134131 = VERTEX_POINT('',#134132); +#134132 = CARTESIAN_POINT('',(117.799225,-130.466485,1.585)); +#134133 = CIRCLE('',#134134,0.308109459502); +#134134 = AXIS2_PLACEMENT_3D('',#134135,#134136,#134137); +#134135 = CARTESIAN_POINT('',(117.87818845359,-130.7643040927,1.585)); +#134136 = DIRECTION('',(0.,0.,-1.)); +#134137 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#134138 = ORIENTED_EDGE('',*,*,#134139,.T.); +#134139 = EDGE_CURVE('',#134131,#134140,#134142,.T.); +#134140 = VERTEX_POINT('',#134141); +#134141 = CARTESIAN_POINT('',(118.031361,-130.464205,1.585)); +#134142 = LINE('',#134143,#134144); +#134143 = CARTESIAN_POINT('',(117.799225,-130.466485,1.585)); +#134144 = VECTOR('',#134145,1.); +#134145 = DIRECTION('',(0.999951769331,9.821354869939E-03,0.)); +#134146 = ORIENTED_EDGE('',*,*,#134147,.T.); +#134147 = EDGE_CURVE('',#134140,#134148,#134150,.T.); +#134148 = VERTEX_POINT('',#134149); +#134149 = CARTESIAN_POINT('',(118.057237,-130.470432,1.585)); +#134150 = LINE('',#134151,#134152); +#134151 = CARTESIAN_POINT('',(118.031361,-130.464205,1.585)); +#134152 = VECTOR('',#134153,1.); +#134153 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#134154 = ORIENTED_EDGE('',*,*,#134155,.T.); +#134155 = EDGE_CURVE('',#134148,#134156,#134158,.T.); +#134156 = VERTEX_POINT('',#134157); +#134157 = CARTESIAN_POINT('',(118.159844,-130.525465,1.585)); +#134158 = LINE('',#134159,#134160); +#134159 = CARTESIAN_POINT('',(118.057237,-130.470432,1.585)); +#134160 = VECTOR('',#134161,1.); +#134161 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#134162 = ORIENTED_EDGE('',*,*,#134163,.T.); +#134163 = EDGE_CURVE('',#134156,#134164,#134166,.T.); +#134164 = VERTEX_POINT('',#134165); +#134165 = CARTESIAN_POINT('',(118.214878,-130.585216,1.585)); +#134166 = LINE('',#134167,#134168); +#134167 = CARTESIAN_POINT('',(118.159844,-130.525465,1.585)); +#134168 = VECTOR('',#134169,1.); +#134169 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#134170 = ORIENTED_EDGE('',*,*,#134171,.T.); +#134171 = EDGE_CURVE('',#134164,#134172,#134174,.T.); +#134172 = VERTEX_POINT('',#134173); +#134173 = CARTESIAN_POINT('',(118.208491,-131.080153,1.585)); +#134174 = CIRCLE('',#134175,0.457783772261); +#134175 = AXIS2_PLACEMENT_3D('',#134176,#134177,#134178); +#134176 = CARTESIAN_POINT('',(117.82659953493,-130.8277151045,1.585)); +#134177 = DIRECTION('',(0.,0.,-1.)); +#134178 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#134179 = ORIENTED_EDGE('',*,*,#134180,.T.); +#134180 = EDGE_CURVE('',#134172,#134181,#134183,.T.); +#134181 = VERTEX_POINT('',#134182); +#134182 = CARTESIAN_POINT('',(118.159843,-131.131675,1.585)); +#134183 = LINE('',#134184,#134185); +#134184 = CARTESIAN_POINT('',(118.208491,-131.080153,1.585)); +#134185 = VECTOR('',#134186,1.); +#134186 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#134187 = ORIENTED_EDGE('',*,*,#134188,.T.); +#134188 = EDGE_CURVE('',#134181,#134189,#134191,.T.); +#134189 = VERTEX_POINT('',#134190); +#134190 = CARTESIAN_POINT('',(118.067921,-131.039751,1.585)); +#134191 = CIRCLE('',#134192,6.499937665136E-02); +#134192 = AXIS2_PLACEMENT_3D('',#134193,#134194,#134195); +#134193 = CARTESIAN_POINT('',(118.11388218097,-131.085712819,1.585)); +#134194 = DIRECTION('',(-0.,0.,-1.)); +#134195 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#134196 = ORIENTED_EDGE('',*,*,#134197,.T.); +#134197 = EDGE_CURVE('',#134189,#134198,#134200,.T.); +#134198 = VERTEX_POINT('',#134199); +#134199 = CARTESIAN_POINT('',(118.103319,-131.004353,1.585)); +#134200 = LINE('',#134201,#134202); +#134201 = CARTESIAN_POINT('',(118.067921,-131.039751,1.585)); +#134202 = VECTOR('',#134203,1.); +#134203 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#134204 = ORIENTED_EDGE('',*,*,#134205,.T.); +#134205 = EDGE_CURVE('',#134198,#134206,#134208,.T.); +#134206 = VERTEX_POINT('',#134207); +#134207 = CARTESIAN_POINT('',(118.103319,-130.652788,1.585)); +#134208 = CIRCLE('',#134209,0.325008683278); +#134209 = AXIS2_PLACEMENT_3D('',#134210,#134211,#134212); +#134210 = CARTESIAN_POINT('',(117.829949,-130.8285705,1.585)); +#134211 = DIRECTION('',(0.,-0.,1.)); +#134212 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#134213 = ORIENTED_EDGE('',*,*,#134214,.T.); +#134214 = EDGE_CURVE('',#134206,#134215,#134217,.T.); +#134215 = VERTEX_POINT('',#134216); +#134216 = CARTESIAN_POINT('',(118.075379,-130.624848,1.585)); +#134217 = LINE('',#134218,#134219); +#134218 = CARTESIAN_POINT('',(118.103319,-130.652788,1.585)); +#134219 = VECTOR('',#134220,1.); +#134220 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#134221 = ORIENTED_EDGE('',*,*,#134222,.T.); +#134222 = EDGE_CURVE('',#134215,#134223,#134225,.T.); +#134223 = VERTEX_POINT('',#134224); +#134224 = CARTESIAN_POINT('',(117.766671,-130.624848,1.585)); +#134225 = CIRCLE('',#134226,0.277419178294); +#134226 = AXIS2_PLACEMENT_3D('',#134227,#134228,#134229); +#134227 = CARTESIAN_POINT('',(117.921025,-130.855361,1.585)); +#134228 = DIRECTION('',(0.,0.,1.)); +#134229 = DIRECTION('',(0.556392679661,0.830919482273,-0.)); +#134230 = ORIENTED_EDGE('',*,*,#134231,.T.); +#134231 = EDGE_CURVE('',#134223,#134232,#134234,.T.); +#134232 = VERTEX_POINT('',#134233); +#134233 = CARTESIAN_POINT('',(117.738733,-130.652786,1.585)); +#134234 = LINE('',#134235,#134236); +#134235 = CARTESIAN_POINT('',(117.766671,-130.624848,1.585)); +#134236 = VECTOR('',#134237,1.); +#134237 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#134238 = ORIENTED_EDGE('',*,*,#134239,.T.); +#134239 = EDGE_CURVE('',#134232,#134240,#134242,.T.); +#134240 = VERTEX_POINT('',#134241); +#134241 = CARTESIAN_POINT('',(117.707454,-130.715344,1.585)); +#134242 = LINE('',#134243,#134244); +#134243 = CARTESIAN_POINT('',(117.738733,-130.652786,1.585)); +#134244 = VECTOR('',#134245,1.); +#134245 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#134246 = ORIENTED_EDGE('',*,*,#134247,.T.); +#134247 = EDGE_CURVE('',#134240,#134248,#134250,.T.); +#134248 = VERTEX_POINT('',#134249); +#134249 = CARTESIAN_POINT('',(117.707454,-130.82857,1.585)); +#134250 = LINE('',#134251,#134252); +#134251 = CARTESIAN_POINT('',(117.707454,-130.715344,1.585)); +#134252 = VECTOR('',#134253,1.); +#134253 = DIRECTION('',(0.,-1.,0.)); +#134254 = ORIENTED_EDGE('',*,*,#134255,.T.); +#134255 = EDGE_CURVE('',#134248,#134256,#134258,.T.); +#134256 = VERTEX_POINT('',#134257); +#134257 = CARTESIAN_POINT('',(117.599652,-130.877488,1.585)); +#134258 = CIRCLE('',#134259,6.500010429712E-02); +#134259 = AXIS2_PLACEMENT_3D('',#134260,#134261,#134262); +#134260 = CARTESIAN_POINT('',(117.6424538957,-130.8285695854,1.585)); +#134261 = DIRECTION('',(-0.,0.,-1.)); +#134262 = DIRECTION('',(0.99999999998,-6.377789005543E-06,-0.)); +#134263 = ORIENTED_EDGE('',*,*,#134264,.T.); +#134264 = EDGE_CURVE('',#134256,#134265,#134267,.T.); +#134265 = VERTEX_POINT('',#134266); +#134266 = CARTESIAN_POINT('',(117.364597,-130.671814,1.585)); +#134267 = LINE('',#134268,#134269); +#134268 = CARTESIAN_POINT('',(117.599652,-130.877488,1.585)); +#134269 = VECTOR('',#134270,1.); +#134270 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#134271 = ORIENTED_EDGE('',*,*,#134272,.T.); +#134272 = EDGE_CURVE('',#134265,#134273,#134275,.T.); +#134273 = VERTEX_POINT('',#134274); +#134274 = CARTESIAN_POINT('',(117.364597,-131.085713,1.585)); +#134275 = LINE('',#134276,#134277); +#134276 = CARTESIAN_POINT('',(117.364597,-130.671814,1.585)); +#134277 = VECTOR('',#134278,1.); +#134278 = DIRECTION('',(0.,-1.,0.)); +#134279 = ORIENTED_EDGE('',*,*,#134280,.T.); +#134280 = EDGE_CURVE('',#134273,#134281,#134283,.T.); +#134281 = VERTEX_POINT('',#134282); +#134282 = CARTESIAN_POINT('',(117.234597,-131.085713,1.585)); +#134283 = CIRCLE('',#134284,6.500000000092E-02); +#134284 = AXIS2_PLACEMENT_3D('',#134285,#134286,#134287); +#134285 = CARTESIAN_POINT('',(117.299597,-131.0857126551,1.585)); +#134286 = DIRECTION('',(-0.,0.,-1.)); +#134287 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#134288 = ORIENTED_EDGE('',*,*,#134289,.T.); +#134289 = EDGE_CURVE('',#134281,#134290,#134292,.T.); +#134290 = VERTEX_POINT('',#134291); +#134291 = CARTESIAN_POINT('',(117.234597,-130.52857,1.585)); +#134292 = LINE('',#134293,#134294); +#134293 = CARTESIAN_POINT('',(117.234597,-131.085713,1.585)); +#134294 = VECTOR('',#134295,1.); +#134295 = DIRECTION('',(0.,1.,0.)); +#134296 = ORIENTED_EDGE('',*,*,#134297,.T.); +#134297 = EDGE_CURVE('',#134290,#134298,#134300,.T.); +#134298 = VERTEX_POINT('',#134299); +#134299 = CARTESIAN_POINT('',(117.3424,-130.479653,1.585)); +#134300 = CIRCLE('',#134301,6.500002288382E-02); +#134301 = AXIS2_PLACEMENT_3D('',#134302,#134303,#134304); +#134302 = CARTESIAN_POINT('',(117.29959702288,-130.5285703601,1.585)); +#134303 = DIRECTION('',(0.,0.,-1.)); +#134304 = DIRECTION('',(-0.999999999985,5.540886822725E-06,0.)); +#134305 = ORIENTED_EDGE('',*,*,#134306,.T.); +#134306 = EDGE_CURVE('',#134298,#134129,#134307,.T.); +#134307 = LINE('',#134308,#134309); +#134308 = CARTESIAN_POINT('',(117.3424,-130.479653,1.585)); +#134309 = VECTOR('',#134310,1.); +#134310 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#134311 = PLANE('',#134312); +#134312 = AXIS2_PLACEMENT_3D('',#134313,#134314,#134315); +#134313 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134314 = DIRECTION('',(0.,0.,1.)); +#134315 = DIRECTION('',(1.,0.,-0.)); +#134316 = SHELL_BASED_SURFACE_MODEL('',(#134317)); +#134317 = OPEN_SHELL('',(#134318)); +#134318 = ADVANCED_FACE('',(#134319),#134355,.T.); +#134319 = FACE_BOUND('',#134320,.F.); +#134320 = EDGE_LOOP('',(#134321,#134332,#134340,#134349)); +#134321 = ORIENTED_EDGE('',*,*,#134322,.T.); +#134322 = EDGE_CURVE('',#134323,#134325,#134327,.T.); +#134323 = VERTEX_POINT('',#134324); +#134324 = CARTESIAN_POINT('',(159.675,-128.805,1.585)); +#134325 = VERTEX_POINT('',#134326); +#134326 = CARTESIAN_POINT('',(159.675,-128.685,1.585)); +#134327 = CIRCLE('',#134328,6.000000000043E-02); +#134328 = AXIS2_PLACEMENT_3D('',#134329,#134330,#134331); +#134329 = CARTESIAN_POINT('',(159.67499977441,-128.745,1.585)); +#134330 = DIRECTION('',(0.,0.,-1.)); +#134331 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#134332 = ORIENTED_EDGE('',*,*,#134333,.T.); +#134333 = EDGE_CURVE('',#134325,#134334,#134336,.T.); +#134334 = VERTEX_POINT('',#134335); +#134335 = CARTESIAN_POINT('',(168.625,-128.685,1.585)); +#134336 = LINE('',#134337,#134338); +#134337 = CARTESIAN_POINT('',(159.675,-128.685,1.585)); +#134338 = VECTOR('',#134339,1.); +#134339 = DIRECTION('',(1.,0.,0.)); +#134340 = ORIENTED_EDGE('',*,*,#134341,.T.); +#134341 = EDGE_CURVE('',#134334,#134342,#134344,.T.); +#134342 = VERTEX_POINT('',#134343); +#134343 = CARTESIAN_POINT('',(168.625,-128.805,1.585)); +#134344 = CIRCLE('',#134345,6.000000000042E-02); +#134345 = AXIS2_PLACEMENT_3D('',#134346,#134347,#134348); +#134346 = CARTESIAN_POINT('',(168.62500022558,-128.745,1.585)); +#134347 = DIRECTION('',(0.,0.,-1.)); +#134348 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#134349 = ORIENTED_EDGE('',*,*,#134350,.T.); +#134350 = EDGE_CURVE('',#134342,#134323,#134351,.T.); +#134351 = LINE('',#134352,#134353); +#134352 = CARTESIAN_POINT('',(168.625,-128.805,1.585)); +#134353 = VECTOR('',#134354,1.); +#134354 = DIRECTION('',(-1.,0.,0.)); +#134355 = PLANE('',#134356); +#134356 = AXIS2_PLACEMENT_3D('',#134357,#134358,#134359); +#134357 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134358 = DIRECTION('',(0.,0.,1.)); +#134359 = DIRECTION('',(1.,0.,-0.)); +#134360 = SHELL_BASED_SURFACE_MODEL('',(#134361)); +#134361 = OPEN_SHELL('',(#134362)); +#134362 = ADVANCED_FACE('',(#134363,#134448),#134507,.T.); +#134363 = FACE_BOUND('',#134364,.F.); +#134364 = EDGE_LOOP('',(#134365,#134376,#134384,#134392,#134400,#134409, + #134417,#134426,#134434,#134442)); +#134365 = ORIENTED_EDGE('',*,*,#134366,.T.); +#134366 = EDGE_CURVE('',#134367,#134369,#134371,.T.); +#134367 = VERTEX_POINT('',#134368); +#134368 = CARTESIAN_POINT('',(182.201866,-127.654267,1.585)); +#134369 = VERTEX_POINT('',#134370); +#134370 = CARTESIAN_POINT('',(182.685776,-127.725163,1.585)); +#134371 = CIRCLE('',#134372,0.34461174713); +#134372 = AXIS2_PLACEMENT_3D('',#134373,#134374,#134375); +#134373 = CARTESIAN_POINT('',(182.40862294377,-127.9299639757,1.585)); +#134374 = DIRECTION('',(0.,0.,-1.)); +#134375 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#134376 = ORIENTED_EDGE('',*,*,#134377,.T.); +#134377 = EDGE_CURVE('',#134369,#134378,#134380,.T.); +#134378 = VERTEX_POINT('',#134379); +#134379 = CARTESIAN_POINT('',(182.743837,-127.84561,1.585)); +#134380 = LINE('',#134381,#134382); +#134381 = CARTESIAN_POINT('',(182.685776,-127.725163,1.585)); +#134382 = VECTOR('',#134383,1.); +#134383 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#134384 = ORIENTED_EDGE('',*,*,#134385,.T.); +#134385 = EDGE_CURVE('',#134378,#134386,#134388,.T.); +#134386 = VERTEX_POINT('',#134387); +#134387 = CARTESIAN_POINT('',(182.745278,-128.166194,1.585)); +#134388 = LINE('',#134389,#134390); +#134389 = CARTESIAN_POINT('',(182.743837,-127.84561,1.585)); +#134390 = VECTOR('',#134391,1.); +#134391 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#134392 = ORIENTED_EDGE('',*,*,#134393,.T.); +#134393 = EDGE_CURVE('',#134386,#134394,#134396,.T.); +#134394 = VERTEX_POINT('',#134395); +#134395 = CARTESIAN_POINT('',(183.161101,-128.167635,1.585)); +#134396 = LINE('',#134397,#134398); +#134397 = CARTESIAN_POINT('',(182.745278,-128.166194,1.585)); +#134398 = VECTOR('',#134399,1.); +#134399 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#134400 = ORIENTED_EDGE('',*,*,#134401,.T.); +#134401 = EDGE_CURVE('',#134394,#134402,#134404,.T.); +#134402 = VERTEX_POINT('',#134403); +#134403 = CARTESIAN_POINT('',(183.146469,-128.316194,1.585)); +#134404 = CIRCLE('',#134405,7.500006711465E-02); +#134405 = AXIS2_PLACEMENT_3D('',#134406,#134407,#134408); +#134406 = CARTESIAN_POINT('',(183.14646906711,-128.2411939328,1.585)); +#134407 = DIRECTION('',(0.,0.,-1.)); +#134408 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#134409 = ORIENTED_EDGE('',*,*,#134410,.T.); +#134410 = EDGE_CURVE('',#134402,#134411,#134413,.T.); +#134411 = VERTEX_POINT('',#134412); +#134412 = CARTESIAN_POINT('',(182.131837,-128.314753,1.585)); +#134413 = LINE('',#134414,#134415); +#134414 = CARTESIAN_POINT('',(183.146469,-128.316194,1.585)); +#134415 = VECTOR('',#134416,1.); +#134416 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#134417 = ORIENTED_EDGE('',*,*,#134418,.T.); +#134418 = EDGE_CURVE('',#134411,#134419,#134421,.T.); +#134419 = VERTEX_POINT('',#134420); +#134420 = CARTESIAN_POINT('',(182.071469,-128.241194,1.585)); +#134421 = CIRCLE('',#134422,7.500074938984E-02); +#134422 = AXIS2_PLACEMENT_3D('',#134423,#134424,#134425); +#134423 = CARTESIAN_POINT('',(182.14646974938,-128.2411935338,1.585)); +#134424 = DIRECTION('',(0.,0.,-1.)); +#134425 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#134426 = ORIENTED_EDGE('',*,*,#134427,.T.); +#134427 = EDGE_CURVE('',#134419,#134428,#134430,.T.); +#134428 = VERTEX_POINT('',#134429); +#134429 = CARTESIAN_POINT('',(182.074132,-127.840433,1.585)); +#134430 = LINE('',#134431,#134432); +#134431 = CARTESIAN_POINT('',(182.071469,-128.241194,1.585)); +#134432 = VECTOR('',#134433,1.); +#134433 = DIRECTION('',(6.644711463175E-03,0.999977923661,0.)); +#134434 = ORIENTED_EDGE('',*,*,#134435,.T.); +#134435 = EDGE_CURVE('',#134428,#134436,#134438,.T.); +#134436 = VERTEX_POINT('',#134437); +#134437 = CARTESIAN_POINT('',(182.136336,-127.71772,1.585)); +#134438 = LINE('',#134439,#134440); +#134439 = CARTESIAN_POINT('',(182.074132,-127.840433,1.585)); +#134440 = VECTOR('',#134441,1.); +#134441 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#134442 = ORIENTED_EDGE('',*,*,#134443,.T.); +#134443 = EDGE_CURVE('',#134436,#134367,#134444,.T.); +#134444 = LINE('',#134445,#134446); +#134445 = CARTESIAN_POINT('',(182.136336,-127.71772,1.585)); +#134446 = VECTOR('',#134447,1.); +#134447 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#134448 = FACE_BOUND('',#134449,.F.); +#134449 = EDGE_LOOP('',(#134450,#134461,#134469,#134477,#134485,#134493, + #134501)); +#134450 = ORIENTED_EDGE('',*,*,#134451,.T.); +#134451 = EDGE_CURVE('',#134452,#134454,#134456,.T.); +#134452 = VERTEX_POINT('',#134453); +#134453 = CARTESIAN_POINT('',(182.530613,-127.779024,1.585)); +#134454 = VERTEX_POINT('',#134455); +#134455 = CARTESIAN_POINT('',(182.255727,-127.809431,1.585)); +#134456 = CIRCLE('',#134457,0.198386215365); +#134457 = AXIS2_PLACEMENT_3D('',#134458,#134459,#134460); +#134458 = CARTESIAN_POINT('',(182.40880995783,-127.9356161753,1.585)); +#134459 = DIRECTION('',(0.,0.,1.)); +#134460 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#134461 = ORIENTED_EDGE('',*,*,#134462,.T.); +#134462 = EDGE_CURVE('',#134454,#134463,#134465,.T.); +#134463 = VERTEX_POINT('',#134464); +#134464 = CARTESIAN_POINT('',(182.221469,-127.877947,1.585)); +#134465 = LINE('',#134466,#134467); +#134466 = CARTESIAN_POINT('',(182.255727,-127.809431,1.585)); +#134467 = VECTOR('',#134468,1.); +#134468 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#134469 = ORIENTED_EDGE('',*,*,#134470,.T.); +#134470 = EDGE_CURVE('',#134463,#134471,#134473,.T.); +#134471 = VERTEX_POINT('',#134472); +#134472 = CARTESIAN_POINT('',(182.221469,-128.166194,1.585)); +#134473 = LINE('',#134474,#134475); +#134474 = CARTESIAN_POINT('',(182.221469,-127.877947,1.585)); +#134475 = VECTOR('',#134476,1.); +#134476 = DIRECTION('',(0.,-1.,0.)); +#134477 = ORIENTED_EDGE('',*,*,#134478,.T.); +#134478 = EDGE_CURVE('',#134471,#134479,#134481,.T.); +#134479 = VERTEX_POINT('',#134480); +#134480 = CARTESIAN_POINT('',(182.595278,-128.166194,1.585)); +#134481 = LINE('',#134482,#134483); +#134482 = CARTESIAN_POINT('',(182.221469,-128.166194,1.585)); +#134483 = VECTOR('',#134484,1.); +#134484 = DIRECTION('',(1.,0.,0.)); +#134485 = ORIENTED_EDGE('',*,*,#134486,.T.); +#134486 = EDGE_CURVE('',#134479,#134487,#134489,.T.); +#134487 = VERTEX_POINT('',#134488); +#134488 = CARTESIAN_POINT('',(182.595278,-127.877947,1.585)); +#134489 = LINE('',#134490,#134491); +#134490 = CARTESIAN_POINT('',(182.595278,-128.166194,1.585)); +#134491 = VECTOR('',#134492,1.); +#134492 = DIRECTION('',(0.,1.,0.)); +#134493 = ORIENTED_EDGE('',*,*,#134494,.T.); +#134494 = EDGE_CURVE('',#134487,#134495,#134497,.T.); +#134495 = VERTEX_POINT('',#134496); +#134496 = CARTESIAN_POINT('',(182.56102,-127.809431,1.585)); +#134497 = LINE('',#134498,#134499); +#134498 = CARTESIAN_POINT('',(182.595278,-127.877947,1.585)); +#134499 = VECTOR('',#134500,1.); +#134500 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#134501 = ORIENTED_EDGE('',*,*,#134502,.T.); +#134502 = EDGE_CURVE('',#134495,#134452,#134503,.T.); +#134503 = LINE('',#134504,#134505); +#134504 = CARTESIAN_POINT('',(182.56102,-127.809431,1.585)); +#134505 = VECTOR('',#134506,1.); +#134506 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#134507 = PLANE('',#134508); +#134508 = AXIS2_PLACEMENT_3D('',#134509,#134510,#134511); +#134509 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134510 = DIRECTION('',(0.,0.,1.)); +#134511 = DIRECTION('',(1.,0.,-0.)); +#134512 = SHELL_BASED_SURFACE_MODEL('',(#134513)); +#134513 = OPEN_SHELL('',(#134514)); +#134514 = ADVANCED_FACE('',(#134515),#134601,.T.); +#134515 = FACE_BOUND('',#134516,.F.); +#134516 = EDGE_LOOP('',(#134517,#134528,#134536,#134545,#134553,#134562, + #134570,#134579,#134587,#134595)); +#134517 = ORIENTED_EDGE('',*,*,#134518,.T.); +#134518 = EDGE_CURVE('',#134519,#134521,#134523,.T.); +#134519 = VERTEX_POINT('',#134520); +#134520 = CARTESIAN_POINT('',(163.774998,-127.017459,1.585)); +#134521 = VERTEX_POINT('',#134522); +#134522 = CARTESIAN_POINT('',(163.891666,-127.079819,1.585)); +#134523 = CIRCLE('',#134524,7.500000000002E-02); +#134524 = AXIS2_PLACEMENT_3D('',#134525,#134526,#134527); +#134525 = CARTESIAN_POINT('',(163.816666,-127.0798190655,1.585)); +#134526 = DIRECTION('',(0.,0.,-1.)); +#134527 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#134528 = ORIENTED_EDGE('',*,*,#134529,.T.); +#134529 = EDGE_CURVE('',#134521,#134530,#134532,.T.); +#134530 = VERTEX_POINT('',#134531); +#134531 = CARTESIAN_POINT('',(163.889466,-127.810566,1.585)); +#134532 = LINE('',#134533,#134534); +#134533 = CARTESIAN_POINT('',(163.891666,-127.079819,1.585)); +#134534 = VECTOR('',#134535,1.); +#134535 = DIRECTION('',(-3.010604258182E-03,-0.999995468121,0.)); +#134536 = ORIENTED_EDGE('',*,*,#134537,.T.); +#134537 = EDGE_CURVE('',#134530,#134538,#134540,.T.); +#134538 = VERTEX_POINT('',#134539); +#134539 = CARTESIAN_POINT('',(163.538357,-128.154089,1.585)); +#134540 = CIRCLE('',#134541,0.38184101318); +#134541 = AXIS2_PLACEMENT_3D('',#134542,#134543,#134544); +#134542 = CARTESIAN_POINT('',(163.50944350032,-127.7733442444,1.585)); +#134543 = DIRECTION('',(0.,0.,-1.)); +#134544 = DIRECTION('',(0.995237511316,-9.747972132573E-02,0.)); +#134545 = ORIENTED_EDGE('',*,*,#134546,.T.); +#134546 = EDGE_CURVE('',#134538,#134547,#134549,.T.); +#134547 = VERTEX_POINT('',#134548); +#134548 = CARTESIAN_POINT('',(163.421082,-128.153378,1.585)); +#134549 = LINE('',#134550,#134551); +#134550 = CARTESIAN_POINT('',(163.538357,-128.154089,1.585)); +#134551 = VECTOR('',#134552,1.); +#134552 = DIRECTION('',(-0.999981622503,6.062561787214E-03,0.)); +#134553 = ORIENTED_EDGE('',*,*,#134554,.T.); +#134554 = EDGE_CURVE('',#134547,#134555,#134557,.T.); +#134555 = VERTEX_POINT('',#134556); +#134556 = CARTESIAN_POINT('',(163.435714,-128.004819,1.585)); +#134557 = CIRCLE('',#134558,7.500006711464E-02); +#134558 = AXIS2_PLACEMENT_3D('',#134559,#134560,#134561); +#134559 = CARTESIAN_POINT('',(163.43571393288,-128.0798190671,1.585)); +#134560 = DIRECTION('',(0.,0.,-1.)); +#134561 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#134562 = ORIENTED_EDGE('',*,*,#134563,.T.); +#134563 = EDGE_CURVE('',#134555,#134564,#134566,.T.); +#134564 = VERTEX_POINT('',#134565); +#134565 = CARTESIAN_POINT('',(163.518782,-128.004819,1.585)); +#134566 = LINE('',#134567,#134568); +#134567 = CARTESIAN_POINT('',(163.435714,-128.004819,1.585)); +#134568 = VECTOR('',#134569,1.); +#134569 = DIRECTION('',(1.,0.,0.)); +#134570 = ORIENTED_EDGE('',*,*,#134571,.T.); +#134571 = EDGE_CURVE('',#134564,#134572,#134574,.T.); +#134572 = VERTEX_POINT('',#134573); +#134573 = CARTESIAN_POINT('',(163.741666,-127.781934,1.585)); +#134574 = CIRCLE('',#134575,0.239437351684); +#134575 = AXIS2_PLACEMENT_3D('',#134576,#134577,#134578); +#134576 = CARTESIAN_POINT('',(163.50276490658,-127.7659179784,1.585)); +#134577 = DIRECTION('',(0.,0.,1.)); +#134578 = DIRECTION('',(6.689471506012E-02,-0.997760039838,0.)); +#134579 = ORIENTED_EDGE('',*,*,#134580,.T.); +#134580 = EDGE_CURVE('',#134572,#134581,#134583,.T.); +#134581 = VERTEX_POINT('',#134582); +#134582 = CARTESIAN_POINT('',(163.743107,-127.065187,1.585)); +#134583 = LINE('',#134584,#134585); +#134584 = CARTESIAN_POINT('',(163.741666,-127.781934,1.585)); +#134585 = VECTOR('',#134586,1.); +#134586 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#134587 = ORIENTED_EDGE('',*,*,#134588,.T.); +#134588 = EDGE_CURVE('',#134581,#134589,#134591,.T.); +#134589 = VERTEX_POINT('',#134590); +#134590 = CARTESIAN_POINT('',(163.754306,-127.038151,1.585)); +#134591 = LINE('',#134592,#134593); +#134592 = CARTESIAN_POINT('',(163.743107,-127.065187,1.585)); +#134593 = VECTOR('',#134594,1.); +#134594 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#134595 = ORIENTED_EDGE('',*,*,#134596,.T.); +#134596 = EDGE_CURVE('',#134589,#134519,#134597,.T.); +#134597 = LINE('',#134598,#134599); +#134598 = CARTESIAN_POINT('',(163.754306,-127.038151,1.585)); +#134599 = VECTOR('',#134600,1.); +#134600 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#134601 = PLANE('',#134602); +#134602 = AXIS2_PLACEMENT_3D('',#134603,#134604,#134605); +#134603 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134604 = DIRECTION('',(0.,0.,1.)); +#134605 = DIRECTION('',(1.,0.,-0.)); +#134606 = SHELL_BASED_SURFACE_MODEL('',(#134607)); +#134607 = OPEN_SHELL('',(#134608)); +#134608 = ADVANCED_FACE('',(#134609,#134767),#134837,.T.); +#134609 = FACE_BOUND('',#134610,.F.); +#134610 = EDGE_LOOP('',(#134611,#134622,#134630,#134638,#134646,#134655, + #134663,#134671,#134680,#134688,#134696,#134704,#134712,#134720, + #134728,#134736,#134745,#134753,#134761)); +#134611 = ORIENTED_EDGE('',*,*,#134612,.T.); +#134612 = EDGE_CURVE('',#134613,#134615,#134617,.T.); +#134613 = VERTEX_POINT('',#134614); +#134614 = CARTESIAN_POINT('',(164.300635,-127.06432,1.585)); +#134615 = VERTEX_POINT('',#134616); +#134616 = CARTESIAN_POINT('',(164.768711,-127.069686,1.585)); +#134617 = CIRCLE('',#134618,0.397581403297); +#134618 = AXIS2_PLACEMENT_3D('',#134619,#134620,#134621); +#134619 = CARTESIAN_POINT('',(164.53098887062,-127.3883694816,1.585)); +#134620 = DIRECTION('',(0.,0.,-1.)); +#134621 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#134622 = ORIENTED_EDGE('',*,*,#134623,.T.); +#134623 = EDGE_CURVE('',#134615,#134624,#134626,.T.); +#134624 = VERTEX_POINT('',#134625); +#134625 = CARTESIAN_POINT('',(164.832164,-127.135216,1.585)); +#134626 = LINE('',#134627,#134628); +#134627 = CARTESIAN_POINT('',(164.768711,-127.069686,1.585)); +#134628 = VECTOR('',#134629,1.); +#134629 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#134630 = ORIENTED_EDGE('',*,*,#134631,.T.); +#134631 = EDGE_CURVE('',#134624,#134632,#134634,.T.); +#134632 = VERTEX_POINT('',#134633); +#134633 = CARTESIAN_POINT('',(164.890225,-127.255663,1.585)); +#134634 = LINE('',#134635,#134636); +#134635 = CARTESIAN_POINT('',(164.832164,-127.135216,1.585)); +#134636 = VECTOR('',#134637,1.); +#134637 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#134638 = ORIENTED_EDGE('',*,*,#134639,.T.); +#134639 = EDGE_CURVE('',#134632,#134640,#134642,.T.); +#134640 = VERTEX_POINT('',#134641); +#134641 = CARTESIAN_POINT('',(164.889427,-127.669437,1.585)); +#134642 = LINE('',#134643,#134644); +#134643 = CARTESIAN_POINT('',(164.890225,-127.255663,1.585)); +#134644 = VECTOR('',#134645,1.); +#134645 = DIRECTION('',(-1.928585449825E-03,-0.999998140277,0.)); +#134646 = ORIENTED_EDGE('',*,*,#134647,.T.); +#134647 = EDGE_CURVE('',#134640,#134648,#134650,.T.); +#134648 = VERTEX_POINT('',#134649); +#134649 = CARTESIAN_POINT('',(164.659731,-128.099282,1.585)); +#134650 = CIRCLE('',#134651,0.610117599579); +#134651 = AXIS2_PLACEMENT_3D('',#134652,#134653,#134654); +#134652 = CARTESIAN_POINT('',(164.2812556885,-127.6207426349,1.585)); +#134653 = DIRECTION('',(0.,0.,-1.)); +#134654 = DIRECTION('',(0.996809978793,-7.981144140799E-02,0.)); +#134655 = ORIENTED_EDGE('',*,*,#134656,.T.); +#134656 = EDGE_CURVE('',#134648,#134657,#134659,.T.); +#134657 = VERTEX_POINT('',#134658); +#134658 = CARTESIAN_POINT('',(164.545584,-128.153378,1.585)); +#134659 = LINE('',#134660,#134661); +#134660 = CARTESIAN_POINT('',(164.659731,-128.099282,1.585)); +#134661 = VECTOR('',#134662,1.); +#134662 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#134663 = ORIENTED_EDGE('',*,*,#134664,.T.); +#134664 = EDGE_CURVE('',#134657,#134665,#134667,.T.); +#134665 = VERTEX_POINT('',#134666); +#134666 = CARTESIAN_POINT('',(164.325844,-128.153378,1.585)); +#134667 = LINE('',#134668,#134669); +#134668 = CARTESIAN_POINT('',(164.545584,-128.153378,1.585)); +#134669 = VECTOR('',#134670,1.); +#134670 = DIRECTION('',(-1.,0.,0.)); +#134671 = ORIENTED_EDGE('',*,*,#134672,.T.); +#134672 = EDGE_CURVE('',#134665,#134673,#134675,.T.); +#134673 = VERTEX_POINT('',#134674); +#134674 = CARTESIAN_POINT('',(164.340476,-128.004819,1.585)); +#134675 = CIRCLE('',#134676,7.500006711465E-02); +#134676 = AXIS2_PLACEMENT_3D('',#134677,#134678,#134679); +#134677 = CARTESIAN_POINT('',(164.34047593288,-128.0798190671,1.585)); +#134678 = DIRECTION('',(0.,0.,-1.)); +#134679 = DIRECTION('',(-0.195092263892,-0.980784894138,-0.)); +#134680 = ORIENTED_EDGE('',*,*,#134681,.T.); +#134681 = EDGE_CURVE('',#134673,#134682,#134684,.T.); +#134682 = VERTEX_POINT('',#134683); +#134683 = CARTESIAN_POINT('',(164.513247,-128.004819,1.585)); +#134684 = LINE('',#134685,#134686); +#134685 = CARTESIAN_POINT('',(164.340476,-128.004819,1.585)); +#134686 = VECTOR('',#134687,1.); +#134687 = DIRECTION('',(1.,0.,0.)); +#134688 = ORIENTED_EDGE('',*,*,#134689,.T.); +#134689 = EDGE_CURVE('',#134682,#134690,#134692,.T.); +#134690 = VERTEX_POINT('',#134691); +#134691 = CARTESIAN_POINT('',(164.581762,-127.970561,1.585)); +#134692 = LINE('',#134693,#134694); +#134693 = CARTESIAN_POINT('',(164.513247,-128.004819,1.585)); +#134694 = VECTOR('',#134695,1.); +#134695 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#134696 = ORIENTED_EDGE('',*,*,#134697,.T.); +#134697 = EDGE_CURVE('',#134690,#134698,#134700,.T.); +#134698 = VERTEX_POINT('',#134699); +#134699 = CARTESIAN_POINT('',(164.615522,-127.9368,1.585)); +#134700 = LINE('',#134701,#134702); +#134701 = CARTESIAN_POINT('',(164.581762,-127.970561,1.585)); +#134702 = VECTOR('',#134703,1.); +#134703 = DIRECTION('',(0.707096308711,0.707117253507,0.)); +#134704 = ORIENTED_EDGE('',*,*,#134705,.T.); +#134705 = EDGE_CURVE('',#134698,#134706,#134708,.T.); +#134706 = VERTEX_POINT('',#134707); +#134707 = CARTESIAN_POINT('',(164.699437,-127.810929,1.585)); +#134708 = LINE('',#134709,#134710); +#134709 = CARTESIAN_POINT('',(164.615522,-127.9368,1.585)); +#134710 = VECTOR('',#134711,1.); +#134711 = DIRECTION('',(0.55470477259,0.83204724341,0.)); +#134712 = ORIENTED_EDGE('',*,*,#134713,.T.); +#134713 = EDGE_CURVE('',#134706,#134714,#134716,.T.); +#134714 = VERTEX_POINT('',#134715); +#134715 = CARTESIAN_POINT('',(164.717961,-127.736833,1.585)); +#134716 = LINE('',#134717,#134718); +#134717 = CARTESIAN_POINT('',(164.699437,-127.810929,1.585)); +#134718 = VECTOR('',#134719,1.); +#134719 = DIRECTION('',(0.242535625037,0.970142500145,0.)); +#134720 = ORIENTED_EDGE('',*,*,#134721,.T.); +#134721 = EDGE_CURVE('',#134714,#134722,#134724,.T.); +#134722 = VERTEX_POINT('',#134723); +#134723 = CARTESIAN_POINT('',(164.640822,-127.772425,1.585)); +#134724 = LINE('',#134725,#134726); +#134725 = CARTESIAN_POINT('',(164.717961,-127.736833,1.585)); +#134726 = VECTOR('',#134727,1.); +#134727 = DIRECTION('',(-0.90800692221,-0.418955163734,0.)); +#134728 = ORIENTED_EDGE('',*,*,#134729,.T.); +#134729 = EDGE_CURVE('',#134722,#134730,#134732,.T.); +#134730 = VERTEX_POINT('',#134731); +#134731 = CARTESIAN_POINT('',(164.415904,-127.771203,1.585)); +#134732 = LINE('',#134733,#134734); +#134733 = CARTESIAN_POINT('',(164.640822,-127.772425,1.585)); +#134734 = VECTOR('',#134735,1.); +#134735 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#134736 = ORIENTED_EDGE('',*,*,#134737,.T.); +#134737 = EDGE_CURVE('',#134730,#134738,#134740,.T.); +#134738 = VERTEX_POINT('',#134739); +#134739 = CARTESIAN_POINT('',(164.171679,-127.523022,1.585)); +#134740 = CIRCLE('',#134741,0.348628078749); +#134741 = AXIS2_PLACEMENT_3D('',#134742,#134743,#134744); +#134742 = CARTESIAN_POINT('',(164.5090790302,-127.4352566485,1.585)); +#134743 = DIRECTION('',(0.,0.,-1.)); +#134744 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#134745 = ORIENTED_EDGE('',*,*,#134746,.T.); +#134746 = EDGE_CURVE('',#134738,#134747,#134749,.T.); +#134747 = VERTEX_POINT('',#134748); +#134748 = CARTESIAN_POINT('',(164.172901,-127.250486,1.585)); +#134749 = LINE('',#134750,#134751); +#134750 = CARTESIAN_POINT('',(164.171679,-127.523022,1.585)); +#134751 = VECTOR('',#134752,1.); +#134752 = DIRECTION('',(4.483766241087E-03,0.99998994787,0.)); +#134753 = ORIENTED_EDGE('',*,*,#134754,.T.); +#134754 = EDGE_CURVE('',#134747,#134755,#134757,.T.); +#134755 = VERTEX_POINT('',#134756); +#134756 = CARTESIAN_POINT('',(164.235105,-127.127773,1.585)); +#134757 = LINE('',#134758,#134759); +#134758 = CARTESIAN_POINT('',(164.172901,-127.250486,1.585)); +#134759 = VECTOR('',#134760,1.); +#134760 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#134761 = ORIENTED_EDGE('',*,*,#134762,.T.); +#134762 = EDGE_CURVE('',#134755,#134613,#134763,.T.); +#134763 = LINE('',#134764,#134765); +#134764 = CARTESIAN_POINT('',(164.235105,-127.127773,1.585)); +#134765 = VECTOR('',#134766,1.); +#134766 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#134767 = FACE_BOUND('',#134768,.F.); +#134768 = EDGE_LOOP('',(#134769,#134780,#134788,#134797,#134805,#134814, + #134822,#134831)); +#134769 = ORIENTED_EDGE('',*,*,#134770,.T.); +#134770 = EDGE_CURVE('',#134771,#134773,#134775,.T.); +#134771 = VERTEX_POINT('',#134772); +#134772 = CARTESIAN_POINT('',(164.677001,-127.189077,1.585)); +#134773 = VERTEX_POINT('',#134774); +#134774 = CARTESIAN_POINT('',(164.384903,-127.189077,1.585)); +#134775 = CIRCLE('',#134776,0.252889603602); +#134776 = AXIS2_PLACEMENT_3D('',#134777,#134778,#134779); +#134777 = CARTESIAN_POINT('',(164.530952,-127.39553,1.585)); +#134778 = DIRECTION('',(0.,0.,1.)); +#134779 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#134780 = ORIENTED_EDGE('',*,*,#134781,.T.); +#134781 = EDGE_CURVE('',#134773,#134782,#134784,.T.); +#134782 = VERTEX_POINT('',#134783); +#134783 = CARTESIAN_POINT('',(164.354496,-127.219484,1.585)); +#134784 = LINE('',#134785,#134786); +#134785 = CARTESIAN_POINT('',(164.384903,-127.189077,1.585)); +#134786 = VECTOR('',#134787,1.); +#134787 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#134788 = ORIENTED_EDGE('',*,*,#134789,.T.); +#134789 = EDGE_CURVE('',#134782,#134790,#134792,.T.); +#134790 = VERTEX_POINT('',#134791); +#134791 = CARTESIAN_POINT('',(164.354496,-127.559201,1.585)); +#134792 = CIRCLE('',#134793,0.305621483548); +#134793 = AXIS2_PLACEMENT_3D('',#134794,#134795,#134796); +#134794 = CARTESIAN_POINT('',(164.608568,-127.3893425,1.585)); +#134795 = DIRECTION('',(0.,0.,1.)); +#134796 = DIRECTION('',(-0.831328992485,0.555780627815,0.)); +#134797 = ORIENTED_EDGE('',*,*,#134798,.T.); +#134798 = EDGE_CURVE('',#134790,#134799,#134801,.T.); +#134799 = VERTEX_POINT('',#134800); +#134800 = CARTESIAN_POINT('',(164.384903,-127.589608,1.585)); +#134801 = LINE('',#134802,#134803); +#134802 = CARTESIAN_POINT('',(164.354496,-127.559201,1.585)); +#134803 = VECTOR('',#134804,1.); +#134804 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#134805 = ORIENTED_EDGE('',*,*,#134806,.T.); +#134806 = EDGE_CURVE('',#134799,#134807,#134809,.T.); +#134807 = VERTEX_POINT('',#134808); +#134808 = CARTESIAN_POINT('',(164.677001,-127.589608,1.585)); +#134809 = CIRCLE('',#134810,0.252889603602); +#134810 = AXIS2_PLACEMENT_3D('',#134811,#134812,#134813); +#134811 = CARTESIAN_POINT('',(164.530952,-127.383155,1.585)); +#134812 = DIRECTION('',(0.,0.,1.)); +#134813 = DIRECTION('',(-0.577520775547,-0.816375988017,0.)); +#134814 = ORIENTED_EDGE('',*,*,#134815,.T.); +#134815 = EDGE_CURVE('',#134807,#134816,#134818,.T.); +#134816 = VERTEX_POINT('',#134817); +#134817 = CARTESIAN_POINT('',(164.707408,-127.559201,1.585)); +#134818 = LINE('',#134819,#134820); +#134819 = CARTESIAN_POINT('',(164.677001,-127.589608,1.585)); +#134820 = VECTOR('',#134821,1.); +#134821 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#134822 = ORIENTED_EDGE('',*,*,#134823,.T.); +#134823 = EDGE_CURVE('',#134816,#134824,#134826,.T.); +#134824 = VERTEX_POINT('',#134825); +#134825 = CARTESIAN_POINT('',(164.707408,-127.219484,1.585)); +#134826 = CIRCLE('',#134827,0.305621483548); +#134827 = AXIS2_PLACEMENT_3D('',#134828,#134829,#134830); +#134828 = CARTESIAN_POINT('',(164.453336,-127.3893425,1.585)); +#134829 = DIRECTION('',(0.,-0.,1.)); +#134830 = DIRECTION('',(0.831328992485,-0.555780627815,-0.)); +#134831 = ORIENTED_EDGE('',*,*,#134832,.T.); +#134832 = EDGE_CURVE('',#134824,#134771,#134833,.T.); +#134833 = LINE('',#134834,#134835); +#134834 = CARTESIAN_POINT('',(164.707408,-127.219484,1.585)); +#134835 = VECTOR('',#134836,1.); +#134836 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#134837 = PLANE('',#134838); +#134838 = AXIS2_PLACEMENT_3D('',#134839,#134840,#134841); +#134839 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134840 = DIRECTION('',(0.,0.,1.)); +#134841 = DIRECTION('',(1.,0.,-0.)); +#134842 = SHELL_BASED_SURFACE_MODEL('',(#134843)); +#134843 = OPEN_SHELL('',(#134844)); +#134844 = ADVANCED_FACE('',(#134845),#134979,.T.); +#134845 = FACE_BOUND('',#134846,.F.); +#134846 = EDGE_LOOP('',(#134847,#134858,#134866,#134875,#134883,#134891, + #134899,#134907,#134916,#134924,#134932,#134940,#134949,#134957, + #134965,#134973)); +#134847 = ORIENTED_EDGE('',*,*,#134848,.T.); +#134848 = EDGE_CURVE('',#134849,#134851,#134853,.T.); +#134849 = VERTEX_POINT('',#134850); +#134850 = CARTESIAN_POINT('',(183.104801,-126.655025,1.585)); +#134851 = VERTEX_POINT('',#134852); +#134852 = CARTESIAN_POINT('',(183.221469,-126.717385,1.585)); +#134853 = CIRCLE('',#134854,7.500000000003E-02); +#134854 = AXIS2_PLACEMENT_3D('',#134855,#134856,#134857); +#134855 = CARTESIAN_POINT('',(183.146469,-126.7173850655,1.585)); +#134856 = DIRECTION('',(0.,0.,-1.)); +#134857 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#134858 = ORIENTED_EDGE('',*,*,#134859,.T.); +#134859 = EDGE_CURVE('',#134851,#134860,#134862,.T.); +#134860 = VERTEX_POINT('',#134861); +#134861 = CARTESIAN_POINT('',(183.220028,-127.303445,1.585)); +#134862 = LINE('',#134863,#134864); +#134863 = CARTESIAN_POINT('',(183.221469,-126.717385,1.585)); +#134864 = VECTOR('',#134865,1.); +#134865 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#134866 = ORIENTED_EDGE('',*,*,#134867,.T.); +#134867 = EDGE_CURVE('',#134860,#134868,#134870,.T.); +#134868 = VERTEX_POINT('',#134869); +#134869 = CARTESIAN_POINT('',(183.071469,-127.288813,1.585)); +#134870 = CIRCLE('',#134871,7.500006711464E-02); +#134871 = AXIS2_PLACEMENT_3D('',#134872,#134873,#134874); +#134872 = CARTESIAN_POINT('',(183.14646906711,-127.2888130671,1.585)); +#134873 = DIRECTION('',(-0.,0.,-1.)); +#134874 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#134875 = ORIENTED_EDGE('',*,*,#134876,.T.); +#134876 = EDGE_CURVE('',#134868,#134877,#134879,.T.); +#134877 = VERTEX_POINT('',#134878); +#134878 = CARTESIAN_POINT('',(183.071469,-127.078099,1.585)); +#134879 = LINE('',#134880,#134881); +#134880 = CARTESIAN_POINT('',(183.071469,-127.288813,1.585)); +#134881 = VECTOR('',#134882,1.); +#134882 = DIRECTION('',(0.,1.,0.)); +#134883 = ORIENTED_EDGE('',*,*,#134884,.T.); +#134884 = EDGE_CURVE('',#134877,#134885,#134887,.T.); +#134885 = VERTEX_POINT('',#134886); +#134886 = CARTESIAN_POINT('',(182.375154,-127.078099,1.585)); +#134887 = LINE('',#134888,#134889); +#134888 = CARTESIAN_POINT('',(183.071469,-127.078099,1.585)); +#134889 = VECTOR('',#134890,1.); +#134890 = DIRECTION('',(-1.,0.,0.)); +#134891 = ORIENTED_EDGE('',*,*,#134892,.T.); +#134892 = EDGE_CURVE('',#134885,#134893,#134895,.T.); +#134893 = VERTEX_POINT('',#134894); +#134894 = CARTESIAN_POINT('',(182.447683,-127.153739,1.585)); +#134895 = LINE('',#134896,#134897); +#134896 = CARTESIAN_POINT('',(182.375154,-127.078099,1.585)); +#134897 = VECTOR('',#134898,1.); +#134898 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#134899 = ORIENTED_EDGE('',*,*,#134900,.T.); +#134900 = EDGE_CURVE('',#134893,#134901,#134903,.T.); +#134901 = VERTEX_POINT('',#134902); +#134902 = CARTESIAN_POINT('',(182.50452,-127.269003,1.585)); +#134903 = LINE('',#134904,#134905); +#134904 = CARTESIAN_POINT('',(182.447683,-127.153739,1.585)); +#134905 = VECTOR('',#134906,1.); +#134906 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#134907 = ORIENTED_EDGE('',*,*,#134908,.T.); +#134908 = EDGE_CURVE('',#134901,#134909,#134911,.T.); +#134909 = VERTEX_POINT('',#134910); +#134910 = CARTESIAN_POINT('',(182.365101,-127.322354,1.585)); +#134911 = CIRCLE('',#134912,7.500029440469E-02); +#134912 = AXIS2_PLACEMENT_3D('',#134913,#134914,#134915); +#134913 = CARTESIAN_POINT('',(182.43218305397,-127.2888123513,1.585)); +#134914 = DIRECTION('',(0.,0.,-1.)); +#134915 = DIRECTION('',(0.964488827732,0.264123647521,0.)); +#134916 = ORIENTED_EDGE('',*,*,#134917,.T.); +#134917 = EDGE_CURVE('',#134909,#134918,#134920,.T.); +#134918 = VERTEX_POINT('',#134919); +#134919 = CARTESIAN_POINT('',(182.322925,-127.238002,1.585)); +#134920 = LINE('',#134921,#134922); +#134921 = CARTESIAN_POINT('',(182.365101,-127.322354,1.585)); +#134922 = VECTOR('',#134923,1.); +#134923 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#134924 = ORIENTED_EDGE('',*,*,#134925,.T.); +#134925 = EDGE_CURVE('',#134918,#134926,#134928,.T.); +#134926 = VERTEX_POINT('',#134927); +#134927 = CARTESIAN_POINT('',(182.241544,-127.156621,1.585)); +#134928 = LINE('',#134929,#134930); +#134929 = CARTESIAN_POINT('',(182.322925,-127.238002,1.585)); +#134930 = VECTOR('',#134931,1.); +#134931 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#134932 = ORIENTED_EDGE('',*,*,#134933,.T.); +#134933 = EDGE_CURVE('',#134926,#134934,#134936,.T.); +#134934 = VERTEX_POINT('',#134935); +#134935 = CARTESIAN_POINT('',(182.093491,-127.056187,1.585)); +#134936 = LINE('',#134937,#134938); +#134937 = CARTESIAN_POINT('',(182.241544,-127.156621,1.585)); +#134938 = VECTOR('',#134939,1.); +#134939 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#134940 = ORIENTED_EDGE('',*,*,#134941,.T.); +#134941 = EDGE_CURVE('',#134934,#134942,#134944,.T.); +#134942 = VERTEX_POINT('',#134943); +#134943 = CARTESIAN_POINT('',(182.146469,-126.928099,1.585)); +#134944 = CIRCLE('',#134945,7.499993751707E-02); +#134945 = AXIS2_PLACEMENT_3D('',#134946,#134947,#134948); +#134946 = CARTESIAN_POINT('',(182.14646880902,-127.0030989375,1.585)); +#134947 = DIRECTION('',(0.,0.,-1.)); +#134948 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#134949 = ORIENTED_EDGE('',*,*,#134950,.T.); +#134950 = EDGE_CURVE('',#134942,#134951,#134953,.T.); +#134951 = VERTEX_POINT('',#134952); +#134952 = CARTESIAN_POINT('',(183.071469,-126.928099,1.585)); +#134953 = LINE('',#134954,#134955); +#134954 = CARTESIAN_POINT('',(182.146469,-126.928099,1.585)); +#134955 = VECTOR('',#134956,1.); +#134956 = DIRECTION('',(1.,0.,0.)); +#134957 = ORIENTED_EDGE('',*,*,#134958,.T.); +#134958 = EDGE_CURVE('',#134951,#134959,#134961,.T.); +#134959 = VERTEX_POINT('',#134960); +#134960 = CARTESIAN_POINT('',(183.07291,-126.702753,1.585)); +#134961 = LINE('',#134962,#134963); +#134962 = CARTESIAN_POINT('',(183.071469,-126.928099,1.585)); +#134963 = VECTOR('',#134964,1.); +#134964 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#134965 = ORIENTED_EDGE('',*,*,#134966,.T.); +#134966 = EDGE_CURVE('',#134959,#134967,#134969,.T.); +#134967 = VERTEX_POINT('',#134968); +#134968 = CARTESIAN_POINT('',(183.084109,-126.675717,1.585)); +#134969 = LINE('',#134970,#134971); +#134970 = CARTESIAN_POINT('',(183.07291,-126.702753,1.585)); +#134971 = VECTOR('',#134972,1.); +#134972 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#134973 = ORIENTED_EDGE('',*,*,#134974,.T.); +#134974 = EDGE_CURVE('',#134967,#134849,#134975,.T.); +#134975 = LINE('',#134976,#134977); +#134976 = CARTESIAN_POINT('',(183.084109,-126.675717,1.585)); +#134977 = VECTOR('',#134978,1.); +#134978 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#134979 = PLANE('',#134980); +#134980 = AXIS2_PLACEMENT_3D('',#134981,#134982,#134983); +#134981 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134982 = DIRECTION('',(0.,0.,1.)); +#134983 = DIRECTION('',(1.,0.,-0.)); +#134984 = SHELL_BASED_SURFACE_MODEL('',(#134985)); +#134985 = OPEN_SHELL('',(#134986)); +#134986 = ADVANCED_FACE('',(#134987,#135098),#135157,.T.); +#134987 = FACE_BOUND('',#134988,.F.); +#134988 = EDGE_LOOP('',(#134989,#134999,#135008,#135016,#135024,#135032, + #135041,#135049,#135058,#135066,#135075,#135083,#135092)); +#134989 = ORIENTED_EDGE('',*,*,#134990,.T.); +#134990 = EDGE_CURVE('',#134991,#134993,#134995,.T.); +#134991 = VERTEX_POINT('',#134992); +#134992 = CARTESIAN_POINT('',(160.048518,-125.963169,1.585)); +#134993 = VERTEX_POINT('',#134994); +#134994 = CARTESIAN_POINT('',(160.419623,-125.705156,1.585)); +#134995 = LINE('',#134996,#134997); +#134996 = CARTESIAN_POINT('',(160.048518,-125.963169,1.585)); +#134997 = VECTOR('',#134998,1.); +#134998 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#134999 = ORIENTED_EDGE('',*,*,#135000,.T.); +#135000 = EDGE_CURVE('',#134993,#135001,#135003,.T.); +#135001 = VERTEX_POINT('',#135002); +#135002 = CARTESIAN_POINT('',(160.492829,-125.835251,1.585)); +#135003 = CIRCLE('',#135004,7.500005951702E-02); +#135004 = AXIS2_PLACEMENT_3D('',#135005,#135006,#135007); +#135005 = CARTESIAN_POINT('',(160.44981874739,-125.773808937,1.585)); +#135006 = DIRECTION('',(0.,0.,-1.)); +#135007 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#135008 = ORIENTED_EDGE('',*,*,#135009,.T.); +#135009 = EDGE_CURVE('',#135001,#135010,#135012,.T.); +#135010 = VERTEX_POINT('',#135011); +#135011 = CARTESIAN_POINT('',(160.048628,-126.146191,1.585)); +#135012 = LINE('',#135013,#135014); +#135013 = CARTESIAN_POINT('',(160.492829,-125.835251,1.585)); +#135014 = VECTOR('',#135015,1.); +#135015 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#135016 = ORIENTED_EDGE('',*,*,#135017,.T.); +#135017 = EDGE_CURVE('',#135010,#135018,#135020,.T.); +#135018 = VERTEX_POINT('',#135019); +#135019 = CARTESIAN_POINT('',(160.048628,-126.270237,1.585)); +#135020 = LINE('',#135021,#135022); +#135021 = CARTESIAN_POINT('',(160.048628,-126.146191,1.585)); +#135022 = VECTOR('',#135023,1.); +#135023 = DIRECTION('',(0.,-1.,0.)); +#135024 = ORIENTED_EDGE('',*,*,#135025,.T.); +#135025 = EDGE_CURVE('',#135018,#135026,#135028,.T.); +#135026 = VERTEX_POINT('',#135027); +#135027 = CARTESIAN_POINT('',(160.464451,-126.271678,1.585)); +#135028 = LINE('',#135029,#135030); +#135029 = CARTESIAN_POINT('',(160.048628,-126.270237,1.585)); +#135030 = VECTOR('',#135031,1.); +#135031 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#135032 = ORIENTED_EDGE('',*,*,#135033,.T.); +#135033 = EDGE_CURVE('',#135026,#135034,#135036,.T.); +#135034 = VERTEX_POINT('',#135035); +#135035 = CARTESIAN_POINT('',(160.449819,-126.420237,1.585)); +#135036 = CIRCLE('',#135037,7.500006711464E-02); +#135037 = AXIS2_PLACEMENT_3D('',#135038,#135039,#135040); +#135038 = CARTESIAN_POINT('',(160.44981906711,-126.3452369328,1.585)); +#135039 = DIRECTION('',(0.,0.,-1.)); +#135040 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#135041 = ORIENTED_EDGE('',*,*,#135042,.T.); +#135042 = EDGE_CURVE('',#135034,#135043,#135045,.T.); +#135043 = VERTEX_POINT('',#135044); +#135044 = CARTESIAN_POINT('',(159.435187,-126.418796,1.585)); +#135045 = LINE('',#135046,#135047); +#135046 = CARTESIAN_POINT('',(160.449819,-126.420237,1.585)); +#135047 = VECTOR('',#135048,1.); +#135048 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#135049 = ORIENTED_EDGE('',*,*,#135050,.T.); +#135050 = EDGE_CURVE('',#135043,#135051,#135053,.T.); +#135051 = VERTEX_POINT('',#135052); +#135052 = CARTESIAN_POINT('',(159.374819,-126.345237,1.585)); +#135053 = CIRCLE('',#135054,7.500074938986E-02); +#135054 = AXIS2_PLACEMENT_3D('',#135055,#135056,#135057); +#135055 = CARTESIAN_POINT('',(159.44981974938,-126.3452365338,1.585)); +#135056 = DIRECTION('',(0.,0.,-1.)); +#135057 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#135058 = ORIENTED_EDGE('',*,*,#135059,.T.); +#135059 = EDGE_CURVE('',#135051,#135060,#135062,.T.); +#135060 = VERTEX_POINT('',#135061); +#135061 = CARTESIAN_POINT('',(159.377482,-125.944476,1.585)); +#135062 = LINE('',#135063,#135064); +#135063 = CARTESIAN_POINT('',(159.374819,-126.345237,1.585)); +#135064 = VECTOR('',#135065,1.); +#135065 = DIRECTION('',(6.644711463175E-03,0.999977923661,0.)); +#135066 = ORIENTED_EDGE('',*,*,#135067,.T.); +#135067 = EDGE_CURVE('',#135060,#135068,#135070,.T.); +#135068 = VERTEX_POINT('',#135069); +#135069 = CARTESIAN_POINT('',(159.625663,-125.70025,1.585)); +#135070 = CIRCLE('',#135071,0.3486213829); +#135071 = AXIS2_PLACEMENT_3D('',#135072,#135073,#135074); +#135072 = CARTESIAN_POINT('',(159.71342322951,-126.0376444438,1.585)); +#135073 = DIRECTION('',(0.,0.,-1.)); +#135074 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#135075 = ORIENTED_EDGE('',*,*,#135076,.T.); +#135076 = EDGE_CURVE('',#135068,#135077,#135079,.T.); +#135077 = VERTEX_POINT('',#135078); +#135078 = CARTESIAN_POINT('',(159.797784,-125.70025,1.585)); +#135079 = LINE('',#135080,#135081); +#135080 = CARTESIAN_POINT('',(159.625663,-125.70025,1.585)); +#135081 = VECTOR('',#135082,1.); +#135082 = DIRECTION('',(1.,0.,0.)); +#135083 = ORIENTED_EDGE('',*,*,#135084,.T.); +#135084 = EDGE_CURVE('',#135077,#135085,#135087,.T.); +#135085 = VERTEX_POINT('',#135086); +#135086 = CARTESIAN_POINT('',(160.047187,-125.949653,1.585)); +#135087 = CIRCLE('',#135088,0.347870264855); +#135088 = AXIS2_PLACEMENT_3D('',#135089,#135090,#135091); +#135089 = CARTESIAN_POINT('',(159.71045626502,-126.0369807349,1.585)); +#135090 = DIRECTION('',(0.,0.,-1.)); +#135091 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#135092 = ORIENTED_EDGE('',*,*,#135093,.T.); +#135093 = EDGE_CURVE('',#135085,#134991,#135094,.T.); +#135094 = LINE('',#135095,#135096); +#135095 = CARTESIAN_POINT('',(160.047187,-125.949653,1.585)); +#135096 = VECTOR('',#135097,1.); +#135097 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#135098 = FACE_BOUND('',#135099,.F.); +#135099 = EDGE_LOOP('',(#135100,#135111,#135119,#135127,#135135,#135143, + #135151)); +#135100 = ORIENTED_EDGE('',*,*,#135101,.T.); +#135101 = EDGE_CURVE('',#135102,#135104,#135106,.T.); +#135102 = VERTEX_POINT('',#135103); +#135103 = CARTESIAN_POINT('',(159.833963,-125.883067,1.585)); +#135104 = VERTEX_POINT('',#135105); +#135105 = CARTESIAN_POINT('',(159.559077,-125.913474,1.585)); +#135106 = CIRCLE('',#135107,0.198386215365); +#135107 = AXIS2_PLACEMENT_3D('',#135108,#135109,#135110); +#135108 = CARTESIAN_POINT('',(159.71215995783,-126.0396591753,1.585)); +#135109 = DIRECTION('',(0.,0.,1.)); +#135110 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#135111 = ORIENTED_EDGE('',*,*,#135112,.T.); +#135112 = EDGE_CURVE('',#135104,#135113,#135115,.T.); +#135113 = VERTEX_POINT('',#135114); +#135114 = CARTESIAN_POINT('',(159.524819,-125.98199,1.585)); +#135115 = LINE('',#135116,#135117); +#135116 = CARTESIAN_POINT('',(159.559077,-125.913474,1.585)); +#135117 = VECTOR('',#135118,1.); +#135118 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135119 = ORIENTED_EDGE('',*,*,#135120,.T.); +#135120 = EDGE_CURVE('',#135113,#135121,#135123,.T.); +#135121 = VERTEX_POINT('',#135122); +#135122 = CARTESIAN_POINT('',(159.524819,-126.270237,1.585)); +#135123 = LINE('',#135124,#135125); +#135124 = CARTESIAN_POINT('',(159.524819,-125.98199,1.585)); +#135125 = VECTOR('',#135126,1.); +#135126 = DIRECTION('',(0.,-1.,0.)); +#135127 = ORIENTED_EDGE('',*,*,#135128,.T.); +#135128 = EDGE_CURVE('',#135121,#135129,#135131,.T.); +#135129 = VERTEX_POINT('',#135130); +#135130 = CARTESIAN_POINT('',(159.898628,-126.270237,1.585)); +#135131 = LINE('',#135132,#135133); +#135132 = CARTESIAN_POINT('',(159.524819,-126.270237,1.585)); +#135133 = VECTOR('',#135134,1.); +#135134 = DIRECTION('',(1.,0.,0.)); +#135135 = ORIENTED_EDGE('',*,*,#135136,.T.); +#135136 = EDGE_CURVE('',#135129,#135137,#135139,.T.); +#135137 = VERTEX_POINT('',#135138); +#135138 = CARTESIAN_POINT('',(159.898628,-125.98199,1.585)); +#135139 = LINE('',#135140,#135141); +#135140 = CARTESIAN_POINT('',(159.898628,-126.270237,1.585)); +#135141 = VECTOR('',#135142,1.); +#135142 = DIRECTION('',(0.,1.,0.)); +#135143 = ORIENTED_EDGE('',*,*,#135144,.T.); +#135144 = EDGE_CURVE('',#135137,#135145,#135147,.T.); +#135145 = VERTEX_POINT('',#135146); +#135146 = CARTESIAN_POINT('',(159.86437,-125.913474,1.585)); +#135147 = LINE('',#135148,#135149); +#135148 = CARTESIAN_POINT('',(159.898628,-125.98199,1.585)); +#135149 = VECTOR('',#135150,1.); +#135150 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#135151 = ORIENTED_EDGE('',*,*,#135152,.T.); +#135152 = EDGE_CURVE('',#135145,#135102,#135153,.T.); +#135153 = LINE('',#135154,#135155); +#135154 = CARTESIAN_POINT('',(159.86437,-125.913474,1.585)); +#135155 = VECTOR('',#135156,1.); +#135156 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#135157 = PLANE('',#135158); +#135158 = AXIS2_PLACEMENT_3D('',#135159,#135160,#135161); +#135159 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135160 = DIRECTION('',(0.,0.,1.)); +#135161 = DIRECTION('',(1.,0.,-0.)); +#135162 = SHELL_BASED_SURFACE_MODEL('',(#135163)); +#135163 = OPEN_SHELL('',(#135164)); +#135164 = ADVANCED_FACE('',(#135165,#135276),#135335,.T.); +#135165 = FACE_BOUND('',#135166,.F.); +#135166 = EDGE_LOOP('',(#135167,#135177,#135186,#135194,#135202,#135210, + #135219,#135227,#135236,#135244,#135253,#135261,#135270)); +#135167 = ORIENTED_EDGE('',*,*,#135168,.T.); +#135168 = EDGE_CURVE('',#135169,#135171,#135173,.T.); +#135169 = VERTEX_POINT('',#135170); +#135170 = CARTESIAN_POINT('',(164.023518,-125.963169,1.585)); +#135171 = VERTEX_POINT('',#135172); +#135172 = CARTESIAN_POINT('',(164.394623,-125.705156,1.585)); +#135173 = LINE('',#135174,#135175); +#135174 = CARTESIAN_POINT('',(164.023518,-125.963169,1.585)); +#135175 = VECTOR('',#135176,1.); +#135176 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#135177 = ORIENTED_EDGE('',*,*,#135178,.T.); +#135178 = EDGE_CURVE('',#135171,#135179,#135181,.T.); +#135179 = VERTEX_POINT('',#135180); +#135180 = CARTESIAN_POINT('',(164.467829,-125.835251,1.585)); +#135181 = CIRCLE('',#135182,7.500005951702E-02); +#135182 = AXIS2_PLACEMENT_3D('',#135183,#135184,#135185); +#135183 = CARTESIAN_POINT('',(164.42481874739,-125.773808937,1.585)); +#135184 = DIRECTION('',(0.,0.,-1.)); +#135185 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#135186 = ORIENTED_EDGE('',*,*,#135187,.T.); +#135187 = EDGE_CURVE('',#135179,#135188,#135190,.T.); +#135188 = VERTEX_POINT('',#135189); +#135189 = CARTESIAN_POINT('',(164.023628,-126.146191,1.585)); +#135190 = LINE('',#135191,#135192); +#135191 = CARTESIAN_POINT('',(164.467829,-125.835251,1.585)); +#135192 = VECTOR('',#135193,1.); +#135193 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#135194 = ORIENTED_EDGE('',*,*,#135195,.T.); +#135195 = EDGE_CURVE('',#135188,#135196,#135198,.T.); +#135196 = VERTEX_POINT('',#135197); +#135197 = CARTESIAN_POINT('',(164.023628,-126.270237,1.585)); +#135198 = LINE('',#135199,#135200); +#135199 = CARTESIAN_POINT('',(164.023628,-126.146191,1.585)); +#135200 = VECTOR('',#135201,1.); +#135201 = DIRECTION('',(0.,-1.,0.)); +#135202 = ORIENTED_EDGE('',*,*,#135203,.T.); +#135203 = EDGE_CURVE('',#135196,#135204,#135206,.T.); +#135204 = VERTEX_POINT('',#135205); +#135205 = CARTESIAN_POINT('',(164.439451,-126.271678,1.585)); +#135206 = LINE('',#135207,#135208); +#135207 = CARTESIAN_POINT('',(164.023628,-126.270237,1.585)); +#135208 = VECTOR('',#135209,1.); +#135209 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#135210 = ORIENTED_EDGE('',*,*,#135211,.T.); +#135211 = EDGE_CURVE('',#135204,#135212,#135214,.T.); +#135212 = VERTEX_POINT('',#135213); +#135213 = CARTESIAN_POINT('',(164.424819,-126.420237,1.585)); +#135214 = CIRCLE('',#135215,7.500006711464E-02); +#135215 = AXIS2_PLACEMENT_3D('',#135216,#135217,#135218); +#135216 = CARTESIAN_POINT('',(164.42481906711,-126.3452369328,1.585)); +#135217 = DIRECTION('',(0.,0.,-1.)); +#135218 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#135219 = ORIENTED_EDGE('',*,*,#135220,.T.); +#135220 = EDGE_CURVE('',#135212,#135221,#135223,.T.); +#135221 = VERTEX_POINT('',#135222); +#135222 = CARTESIAN_POINT('',(163.410187,-126.418796,1.585)); +#135223 = LINE('',#135224,#135225); +#135224 = CARTESIAN_POINT('',(164.424819,-126.420237,1.585)); +#135225 = VECTOR('',#135226,1.); +#135226 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#135227 = ORIENTED_EDGE('',*,*,#135228,.T.); +#135228 = EDGE_CURVE('',#135221,#135229,#135231,.T.); +#135229 = VERTEX_POINT('',#135230); +#135230 = CARTESIAN_POINT('',(163.349819,-126.345237,1.585)); +#135231 = CIRCLE('',#135232,7.500074938985E-02); +#135232 = AXIS2_PLACEMENT_3D('',#135233,#135234,#135235); +#135233 = CARTESIAN_POINT('',(163.42481974938,-126.3452365338,1.585)); +#135234 = DIRECTION('',(0.,0.,-1.)); +#135235 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#135236 = ORIENTED_EDGE('',*,*,#135237,.T.); +#135237 = EDGE_CURVE('',#135229,#135238,#135240,.T.); +#135238 = VERTEX_POINT('',#135239); +#135239 = CARTESIAN_POINT('',(163.352482,-125.944476,1.585)); +#135240 = LINE('',#135241,#135242); +#135241 = CARTESIAN_POINT('',(163.349819,-126.345237,1.585)); +#135242 = VECTOR('',#135243,1.); +#135243 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#135244 = ORIENTED_EDGE('',*,*,#135245,.T.); +#135245 = EDGE_CURVE('',#135238,#135246,#135248,.T.); +#135246 = VERTEX_POINT('',#135247); +#135247 = CARTESIAN_POINT('',(163.600663,-125.70025,1.585)); +#135248 = CIRCLE('',#135249,0.3486213829); +#135249 = AXIS2_PLACEMENT_3D('',#135250,#135251,#135252); +#135250 = CARTESIAN_POINT('',(163.68842322951,-126.0376444438,1.585)); +#135251 = DIRECTION('',(0.,0.,-1.)); +#135252 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#135253 = ORIENTED_EDGE('',*,*,#135254,.T.); +#135254 = EDGE_CURVE('',#135246,#135255,#135257,.T.); +#135255 = VERTEX_POINT('',#135256); +#135256 = CARTESIAN_POINT('',(163.772784,-125.70025,1.585)); +#135257 = LINE('',#135258,#135259); +#135258 = CARTESIAN_POINT('',(163.600663,-125.70025,1.585)); +#135259 = VECTOR('',#135260,1.); +#135260 = DIRECTION('',(1.,0.,0.)); +#135261 = ORIENTED_EDGE('',*,*,#135262,.T.); +#135262 = EDGE_CURVE('',#135255,#135263,#135265,.T.); +#135263 = VERTEX_POINT('',#135264); +#135264 = CARTESIAN_POINT('',(164.022187,-125.949653,1.585)); +#135265 = CIRCLE('',#135266,0.347870264855); +#135266 = AXIS2_PLACEMENT_3D('',#135267,#135268,#135269); +#135267 = CARTESIAN_POINT('',(163.68545626502,-126.0369807349,1.585)); +#135268 = DIRECTION('',(0.,0.,-1.)); +#135269 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#135270 = ORIENTED_EDGE('',*,*,#135271,.T.); +#135271 = EDGE_CURVE('',#135263,#135169,#135272,.T.); +#135272 = LINE('',#135273,#135274); +#135273 = CARTESIAN_POINT('',(164.022187,-125.949653,1.585)); +#135274 = VECTOR('',#135275,1.); +#135275 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#135276 = FACE_BOUND('',#135277,.F.); +#135277 = EDGE_LOOP('',(#135278,#135289,#135297,#135305,#135313,#135321, + #135329)); +#135278 = ORIENTED_EDGE('',*,*,#135279,.T.); +#135279 = EDGE_CURVE('',#135280,#135282,#135284,.T.); +#135280 = VERTEX_POINT('',#135281); +#135281 = CARTESIAN_POINT('',(163.808963,-125.883067,1.585)); +#135282 = VERTEX_POINT('',#135283); +#135283 = CARTESIAN_POINT('',(163.534077,-125.913474,1.585)); +#135284 = CIRCLE('',#135285,0.198386215365); +#135285 = AXIS2_PLACEMENT_3D('',#135286,#135287,#135288); +#135286 = CARTESIAN_POINT('',(163.68715995783,-126.0396591753,1.585)); +#135287 = DIRECTION('',(0.,0.,1.)); +#135288 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#135289 = ORIENTED_EDGE('',*,*,#135290,.T.); +#135290 = EDGE_CURVE('',#135282,#135291,#135293,.T.); +#135291 = VERTEX_POINT('',#135292); +#135292 = CARTESIAN_POINT('',(163.499819,-125.98199,1.585)); +#135293 = LINE('',#135294,#135295); +#135294 = CARTESIAN_POINT('',(163.534077,-125.913474,1.585)); +#135295 = VECTOR('',#135296,1.); +#135296 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135297 = ORIENTED_EDGE('',*,*,#135298,.T.); +#135298 = EDGE_CURVE('',#135291,#135299,#135301,.T.); +#135299 = VERTEX_POINT('',#135300); +#135300 = CARTESIAN_POINT('',(163.499819,-126.270237,1.585)); +#135301 = LINE('',#135302,#135303); +#135302 = CARTESIAN_POINT('',(163.499819,-125.98199,1.585)); +#135303 = VECTOR('',#135304,1.); +#135304 = DIRECTION('',(0.,-1.,0.)); +#135305 = ORIENTED_EDGE('',*,*,#135306,.T.); +#135306 = EDGE_CURVE('',#135299,#135307,#135309,.T.); +#135307 = VERTEX_POINT('',#135308); +#135308 = CARTESIAN_POINT('',(163.873628,-126.270237,1.585)); +#135309 = LINE('',#135310,#135311); +#135310 = CARTESIAN_POINT('',(163.499819,-126.270237,1.585)); +#135311 = VECTOR('',#135312,1.); +#135312 = DIRECTION('',(1.,0.,0.)); +#135313 = ORIENTED_EDGE('',*,*,#135314,.T.); +#135314 = EDGE_CURVE('',#135307,#135315,#135317,.T.); +#135315 = VERTEX_POINT('',#135316); +#135316 = CARTESIAN_POINT('',(163.873628,-125.98199,1.585)); +#135317 = LINE('',#135318,#135319); +#135318 = CARTESIAN_POINT('',(163.873628,-126.270237,1.585)); +#135319 = VECTOR('',#135320,1.); +#135320 = DIRECTION('',(0.,1.,0.)); +#135321 = ORIENTED_EDGE('',*,*,#135322,.T.); +#135322 = EDGE_CURVE('',#135315,#135323,#135325,.T.); +#135323 = VERTEX_POINT('',#135324); +#135324 = CARTESIAN_POINT('',(163.83937,-125.913474,1.585)); +#135325 = LINE('',#135326,#135327); +#135326 = CARTESIAN_POINT('',(163.873628,-125.98199,1.585)); +#135327 = VECTOR('',#135328,1.); +#135328 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#135329 = ORIENTED_EDGE('',*,*,#135330,.T.); +#135330 = EDGE_CURVE('',#135323,#135280,#135331,.T.); +#135331 = LINE('',#135332,#135333); +#135332 = CARTESIAN_POINT('',(163.83937,-125.913474,1.585)); +#135333 = VECTOR('',#135334,1.); +#135334 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#135335 = PLANE('',#135336); +#135336 = AXIS2_PLACEMENT_3D('',#135337,#135338,#135339); +#135337 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135338 = DIRECTION('',(0.,0.,1.)); +#135339 = DIRECTION('',(1.,0.,-0.)); +#135340 = SHELL_BASED_SURFACE_MODEL('',(#135341)); +#135341 = OPEN_SHELL('',(#135342)); +#135342 = ADVANCED_FACE('',(#135343),#135476,.T.); +#135343 = FACE_BOUND('',#135344,.F.); +#135344 = EDGE_LOOP('',(#135345,#135356,#135364,#135372,#135380,#135388, + #135397,#135405,#135414,#135422,#135430,#135438,#135446,#135454, + #135462,#135470)); +#135345 = ORIENTED_EDGE('',*,*,#135346,.T.); +#135346 = EDGE_CURVE('',#135347,#135349,#135351,.T.); +#135347 = VERTEX_POINT('',#135348); +#135348 = CARTESIAN_POINT('',(181.726217,-123.360139,1.585)); +#135349 = VERTEX_POINT('',#135350); +#135350 = CARTESIAN_POINT('',(181.84165,-123.3831,1.585)); +#135351 = CIRCLE('',#135352,6.000007318647E-02); +#135352 = AXIS2_PLACEMENT_3D('',#135353,#135354,#135355); +#135353 = CARTESIAN_POINT('',(181.78164992681,-123.3830998233,1.585)); +#135354 = DIRECTION('',(0.,0.,-1.)); +#135355 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135356 = ORIENTED_EDGE('',*,*,#135357,.T.); +#135357 = EDGE_CURVE('',#135349,#135358,#135360,.T.); +#135358 = VERTEX_POINT('',#135359); +#135359 = CARTESIAN_POINT('',(181.84165,-124.64381,1.585)); +#135360 = LINE('',#135361,#135362); +#135361 = CARTESIAN_POINT('',(181.84165,-123.3831,1.585)); +#135362 = VECTOR('',#135363,1.); +#135363 = DIRECTION('',(0.,-1.,0.)); +#135364 = ORIENTED_EDGE('',*,*,#135365,.T.); +#135365 = EDGE_CURVE('',#135358,#135366,#135368,.T.); +#135366 = VERTEX_POINT('',#135367); +#135367 = CARTESIAN_POINT('',(182.87094,-125.6731,1.585)); +#135368 = LINE('',#135369,#135370); +#135369 = CARTESIAN_POINT('',(181.84165,-124.64381,1.585)); +#135370 = VECTOR('',#135371,1.); +#135371 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#135372 = ORIENTED_EDGE('',*,*,#135373,.T.); +#135373 = EDGE_CURVE('',#135366,#135374,#135376,.T.); +#135374 = VERTEX_POINT('',#135375); +#135375 = CARTESIAN_POINT('',(188.54165,-125.6731,1.585)); +#135376 = LINE('',#135377,#135378); +#135377 = CARTESIAN_POINT('',(182.87094,-125.6731,1.585)); +#135378 = VECTOR('',#135379,1.); +#135379 = DIRECTION('',(1.,0.,0.)); +#135380 = ORIENTED_EDGE('',*,*,#135381,.T.); +#135381 = EDGE_CURVE('',#135374,#135382,#135384,.T.); +#135382 = VERTEX_POINT('',#135383); +#135383 = CARTESIAN_POINT('',(188.54165,-123.3831,1.585)); +#135384 = LINE('',#135385,#135386); +#135385 = CARTESIAN_POINT('',(188.54165,-125.6731,1.585)); +#135386 = VECTOR('',#135387,1.); +#135387 = DIRECTION('',(0.,1.,0.)); +#135388 = ORIENTED_EDGE('',*,*,#135389,.T.); +#135389 = EDGE_CURVE('',#135382,#135390,#135392,.T.); +#135390 = VERTEX_POINT('',#135391); +#135391 = CARTESIAN_POINT('',(188.66165,-123.3831,1.585)); +#135392 = CIRCLE('',#135393,6.000000000043E-02); +#135393 = AXIS2_PLACEMENT_3D('',#135394,#135395,#135396); +#135394 = CARTESIAN_POINT('',(188.60165,-123.3830997744,1.585)); +#135395 = DIRECTION('',(0.,0.,-1.)); +#135396 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#135397 = ORIENTED_EDGE('',*,*,#135398,.T.); +#135398 = EDGE_CURVE('',#135390,#135399,#135401,.T.); +#135399 = VERTEX_POINT('',#135400); +#135400 = CARTESIAN_POINT('',(188.66165,-125.7331,1.585)); +#135401 = LINE('',#135402,#135403); +#135402 = CARTESIAN_POINT('',(188.66165,-123.3831,1.585)); +#135403 = VECTOR('',#135404,1.); +#135404 = DIRECTION('',(0.,-1.,0.)); +#135405 = ORIENTED_EDGE('',*,*,#135406,.T.); +#135406 = EDGE_CURVE('',#135399,#135407,#135409,.T.); +#135407 = VERTEX_POINT('',#135408); +#135408 = CARTESIAN_POINT('',(188.60165,-125.7931,1.585)); +#135409 = CIRCLE('',#135410,5.999932016262E-02); +#135410 = AXIS2_PLACEMENT_3D('',#135411,#135412,#135413); +#135411 = CARTESIAN_POINT('',(188.60165067984,-125.7331006798,1.585)); +#135412 = DIRECTION('',(0.,0.,-1.)); +#135413 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#135414 = ORIENTED_EDGE('',*,*,#135415,.T.); +#135415 = EDGE_CURVE('',#135407,#135416,#135418,.T.); +#135416 = VERTEX_POINT('',#135417); +#135417 = CARTESIAN_POINT('',(182.846087,-125.7931,1.585)); +#135418 = LINE('',#135419,#135420); +#135419 = CARTESIAN_POINT('',(188.60165,-125.7931,1.585)); +#135420 = VECTOR('',#135421,1.); +#135421 = DIRECTION('',(-1.,0.,0.)); +#135422 = ORIENTED_EDGE('',*,*,#135423,.T.); +#135423 = EDGE_CURVE('',#135416,#135424,#135426,.T.); +#135424 = VERTEX_POINT('',#135425); +#135425 = CARTESIAN_POINT('',(182.823126,-125.788533,1.585)); +#135426 = LINE('',#135427,#135428); +#135427 = CARTESIAN_POINT('',(182.846087,-125.7931,1.585)); +#135428 = VECTOR('',#135429,1.); +#135429 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#135430 = ORIENTED_EDGE('',*,*,#135431,.T.); +#135431 = EDGE_CURVE('',#135424,#135432,#135434,.T.); +#135432 = VERTEX_POINT('',#135433); +#135433 = CARTESIAN_POINT('',(182.80366,-125.775526,1.585)); +#135434 = LINE('',#135435,#135436); +#135435 = CARTESIAN_POINT('',(182.823126,-125.788533,1.585)); +#135436 = VECTOR('',#135437,1.); +#135437 = DIRECTION('',(-0.831464982668,0.555577161695,0.)); +#135438 = ORIENTED_EDGE('',*,*,#135439,.T.); +#135439 = EDGE_CURVE('',#135432,#135440,#135442,.T.); +#135440 = VERTEX_POINT('',#135441); +#135441 = CARTESIAN_POINT('',(181.739224,-124.711089,1.585)); +#135442 = LINE('',#135443,#135444); +#135443 = CARTESIAN_POINT('',(182.80366,-125.775526,1.585)); +#135444 = VECTOR('',#135445,1.); +#135445 = DIRECTION('',(-0.707106449036,0.707107113337,0.)); +#135446 = ORIENTED_EDGE('',*,*,#135447,.T.); +#135447 = EDGE_CURVE('',#135440,#135448,#135450,.T.); +#135448 = VERTEX_POINT('',#135449); +#135449 = CARTESIAN_POINT('',(181.726217,-124.691624,1.585)); +#135450 = LINE('',#135451,#135452); +#135451 = CARTESIAN_POINT('',(181.739224,-124.711089,1.585)); +#135452 = VECTOR('',#135453,1.); +#135453 = DIRECTION('',(-0.555596893535,0.831451797697,0.)); +#135454 = ORIENTED_EDGE('',*,*,#135455,.T.); +#135455 = EDGE_CURVE('',#135448,#135456,#135458,.T.); +#135456 = VERTEX_POINT('',#135457); +#135457 = CARTESIAN_POINT('',(181.72165,-124.668663,1.585)); +#135458 = LINE('',#135459,#135460); +#135459 = CARTESIAN_POINT('',(181.726217,-124.691624,1.585)); +#135460 = VECTOR('',#135461,1.); +#135461 = DIRECTION('',(-0.195081000117,0.980787134598,0.)); +#135462 = ORIENTED_EDGE('',*,*,#135463,.T.); +#135463 = EDGE_CURVE('',#135456,#135464,#135466,.T.); +#135464 = VERTEX_POINT('',#135465); +#135465 = CARTESIAN_POINT('',(181.72165,-123.3831,1.585)); +#135466 = LINE('',#135467,#135468); +#135467 = CARTESIAN_POINT('',(181.72165,-124.668663,1.585)); +#135468 = VECTOR('',#135469,1.); +#135469 = DIRECTION('',(0.,1.,0.)); +#135470 = ORIENTED_EDGE('',*,*,#135471,.T.); +#135471 = EDGE_CURVE('',#135464,#135347,#135472,.T.); +#135472 = LINE('',#135473,#135474); +#135473 = CARTESIAN_POINT('',(181.72165,-123.3831,1.585)); +#135474 = VECTOR('',#135475,1.); +#135475 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#135476 = PLANE('',#135477); +#135477 = AXIS2_PLACEMENT_3D('',#135478,#135479,#135480); +#135478 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135479 = DIRECTION('',(0.,0.,1.)); +#135480 = DIRECTION('',(1.,0.,-0.)); +#135481 = SHELL_BASED_SURFACE_MODEL('',(#135482)); +#135482 = OPEN_SHELL('',(#135483)); +#135483 = ADVANCED_FACE('',(#135484),#135620,.T.); +#135484 = FACE_BOUND('',#135485,.F.); +#135485 = EDGE_LOOP('',(#135486,#135496,#135505,#135513,#135522,#135530, + #135538,#135547,#135555,#135563,#135572,#135580,#135589,#135597, + #135605,#135614)); +#135486 = ORIENTED_EDGE('',*,*,#135487,.T.); +#135487 = EDGE_CURVE('',#135488,#135490,#135492,.T.); +#135488 = VERTEX_POINT('',#135489); +#135489 = CARTESIAN_POINT('',(160.523378,-124.997272,1.585)); +#135490 = VERTEX_POINT('',#135491); +#135491 = CARTESIAN_POINT('',(160.522156,-125.22219,1.585)); +#135492 = LINE('',#135493,#135494); +#135493 = CARTESIAN_POINT('',(160.523378,-124.997272,1.585)); +#135494 = VECTOR('',#135495,1.); +#135495 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#135496 = ORIENTED_EDGE('',*,*,#135497,.T.); +#135497 = EDGE_CURVE('',#135490,#135498,#135500,.T.); +#135498 = VERTEX_POINT('',#135499); +#135499 = CARTESIAN_POINT('',(160.273974,-125.466415,1.585)); +#135500 = CIRCLE('',#135501,0.348632713765); +#135501 = AXIS2_PLACEMENT_3D('',#135502,#135503,#135504); +#135502 = CARTESIAN_POINT('',(160.18620597394,-125.1290108762,1.585)); +#135503 = DIRECTION('',(0.,0.,-1.)); +#135504 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#135505 = ORIENTED_EDGE('',*,*,#135506,.T.); +#135506 = EDGE_CURVE('',#135498,#135507,#135509,.T.); +#135507 = VERTEX_POINT('',#135508); +#135508 = CARTESIAN_POINT('',(159.953818,-125.465193,1.585)); +#135509 = LINE('',#135510,#135511); +#135510 = CARTESIAN_POINT('',(160.273974,-125.466415,1.585)); +#135511 = VECTOR('',#135512,1.); +#135512 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#135513 = ORIENTED_EDGE('',*,*,#135514,.T.); +#135514 = EDGE_CURVE('',#135507,#135515,#135517,.T.); +#135515 = VERTEX_POINT('',#135516); +#135516 = CARTESIAN_POINT('',(159.709593,-125.217012,1.585)); +#135517 = CIRCLE('',#135518,0.348628078749); +#135518 = AXIS2_PLACEMENT_3D('',#135519,#135520,#135521); +#135519 = CARTESIAN_POINT('',(160.0469930302,-125.1292466485,1.585)); +#135520 = DIRECTION('',(0.,0.,-1.)); +#135521 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#135522 = ORIENTED_EDGE('',*,*,#135523,.T.); +#135523 = EDGE_CURVE('',#135515,#135524,#135526,.T.); +#135524 = VERTEX_POINT('',#135525); +#135525 = CARTESIAN_POINT('',(159.710815,-124.992095,1.585)); +#135526 = LINE('',#135527,#135528); +#135527 = CARTESIAN_POINT('',(159.709593,-125.217012,1.585)); +#135528 = VECTOR('',#135529,1.); +#135529 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#135530 = ORIENTED_EDGE('',*,*,#135531,.T.); +#135531 = EDGE_CURVE('',#135524,#135532,#135534,.T.); +#135532 = VERTEX_POINT('',#135533); +#135533 = CARTESIAN_POINT('',(159.771521,-124.870682,1.585)); +#135534 = LINE('',#135535,#135536); +#135535 = CARTESIAN_POINT('',(159.710815,-124.992095,1.585)); +#135536 = VECTOR('',#135537,1.); +#135537 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#135538 = ORIENTED_EDGE('',*,*,#135539,.T.); +#135539 = EDGE_CURVE('',#135532,#135540,#135542,.T.); +#135540 = VERTEX_POINT('',#135541); +#135541 = CARTESIAN_POINT('',(159.897853,-124.950207,1.585)); +#135542 = CIRCLE('',#135543,7.500029440361E-02); +#135543 = AXIS2_PLACEMENT_3D('',#135544,#135545,#135546); +#135544 = CARTESIAN_POINT('',(159.83077064867,-124.916665946,1.585)); +#135545 = DIRECTION('',(0.,0.,-1.)); +#135546 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#135547 = ORIENTED_EDGE('',*,*,#135548,.T.); +#135548 = EDGE_CURVE('',#135540,#135549,#135551,.T.); +#135549 = VERTEX_POINT('',#135550); +#135550 = CARTESIAN_POINT('',(159.858152,-125.029609,1.585)); +#135551 = LINE('',#135552,#135553); +#135552 = CARTESIAN_POINT('',(159.897853,-124.950207,1.585)); +#135553 = VECTOR('',#135554,1.); +#135554 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135555 = ORIENTED_EDGE('',*,*,#135556,.T.); +#135556 = EDGE_CURVE('',#135549,#135557,#135559,.T.); +#135557 = VERTEX_POINT('',#135558); +#135558 = CARTESIAN_POINT('',(159.858152,-125.184675,1.585)); +#135559 = LINE('',#135560,#135561); +#135560 = CARTESIAN_POINT('',(159.858152,-125.029609,1.585)); +#135561 = VECTOR('',#135562,1.); +#135562 = DIRECTION('',(0.,-1.,0.)); +#135563 = ORIENTED_EDGE('',*,*,#135564,.T.); +#135564 = EDGE_CURVE('',#135557,#135565,#135567,.T.); +#135565 = VERTEX_POINT('',#135566); +#135566 = CARTESIAN_POINT('',(159.991333,-125.317856,1.585)); +#135567 = CIRCLE('',#135568,0.18686440374); +#135568 = AXIS2_PLACEMENT_3D('',#135569,#135570,#135571); +#135569 = CARTESIAN_POINT('',(160.038869,-125.137139,1.585)); +#135570 = DIRECTION('',(0.,0.,1.)); +#135571 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#135572 = ORIENTED_EDGE('',*,*,#135573,.T.); +#135573 = EDGE_CURVE('',#135565,#135574,#135576,.T.); +#135574 = VERTEX_POINT('',#135575); +#135575 = CARTESIAN_POINT('',(160.241637,-125.317856,1.585)); +#135576 = LINE('',#135577,#135578); +#135577 = CARTESIAN_POINT('',(159.991333,-125.317856,1.585)); +#135578 = VECTOR('',#135579,1.); +#135579 = DIRECTION('',(1.,0.,0.)); +#135580 = ORIENTED_EDGE('',*,*,#135581,.T.); +#135581 = EDGE_CURVE('',#135574,#135582,#135584,.T.); +#135582 = VERTEX_POINT('',#135583); +#135583 = CARTESIAN_POINT('',(160.374819,-125.184675,1.585)); +#135584 = CIRCLE('',#135585,0.186872595955); +#135585 = AXIS2_PLACEMENT_3D('',#135586,#135587,#135588); +#135586 = CARTESIAN_POINT('',(160.19409536766,-125.1371320106,1.585)); +#135587 = DIRECTION('',(0.,0.,1.)); +#135588 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#135589 = ORIENTED_EDGE('',*,*,#135590,.T.); +#135590 = EDGE_CURVE('',#135582,#135591,#135593,.T.); +#135591 = VERTEX_POINT('',#135592); +#135592 = CARTESIAN_POINT('',(160.374819,-125.029609,1.585)); +#135593 = LINE('',#135594,#135595); +#135594 = CARTESIAN_POINT('',(160.374819,-125.184675,1.585)); +#135595 = VECTOR('',#135596,1.); +#135596 = DIRECTION('',(0.,1.,0.)); +#135597 = ORIENTED_EDGE('',*,*,#135598,.T.); +#135598 = EDGE_CURVE('',#135591,#135599,#135601,.T.); +#135599 = VERTEX_POINT('',#135600); +#135600 = CARTESIAN_POINT('',(160.329863,-124.936475,1.585)); +#135601 = LINE('',#135602,#135603); +#135602 = CARTESIAN_POINT('',(160.374819,-125.029609,1.585)); +#135603 = VECTOR('',#135604,1.); +#135604 = DIRECTION('',(-0.43470796245,0.900571478219,0.)); +#135605 = ORIENTED_EDGE('',*,*,#135606,.T.); +#135606 = EDGE_CURVE('',#135599,#135607,#135609,.T.); +#135607 = VERTEX_POINT('',#135608); +#135608 = CARTESIAN_POINT('',(160.469282,-124.883125,1.585)); +#135609 = CIRCLE('',#135610,7.500016685596E-02); +#135610 = AXIS2_PLACEMENT_3D('',#135611,#135612,#135613); +#135611 = CARTESIAN_POINT('',(160.4022000864,-124.9166666442,1.585)); +#135612 = DIRECTION('',(0.,0.,-1.)); +#135613 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#135614 = ORIENTED_EDGE('',*,*,#135615,.T.); +#135615 = EDGE_CURVE('',#135607,#135488,#135616,.T.); +#135616 = LINE('',#135617,#135618); +#135617 = CARTESIAN_POINT('',(160.469282,-124.883125,1.585)); +#135618 = VECTOR('',#135619,1.); +#135619 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#135620 = PLANE('',#135621); +#135621 = AXIS2_PLACEMENT_3D('',#135622,#135623,#135624); +#135622 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135623 = DIRECTION('',(0.,0.,1.)); +#135624 = DIRECTION('',(1.,0.,-0.)); +#135625 = SHELL_BASED_SURFACE_MODEL('',(#135626)); +#135626 = OPEN_SHELL('',(#135627)); +#135627 = ADVANCED_FACE('',(#135628),#135764,.T.); +#135628 = FACE_BOUND('',#135629,.F.); +#135629 = EDGE_LOOP('',(#135630,#135640,#135649,#135657,#135666,#135674, + #135682,#135691,#135699,#135707,#135716,#135724,#135733,#135741, + #135749,#135758)); +#135630 = ORIENTED_EDGE('',*,*,#135631,.T.); +#135631 = EDGE_CURVE('',#135632,#135634,#135636,.T.); +#135632 = VERTEX_POINT('',#135633); +#135633 = CARTESIAN_POINT('',(164.498378,-124.997272,1.585)); +#135634 = VERTEX_POINT('',#135635); +#135635 = CARTESIAN_POINT('',(164.497156,-125.22219,1.585)); +#135636 = LINE('',#135637,#135638); +#135637 = CARTESIAN_POINT('',(164.498378,-124.997272,1.585)); +#135638 = VECTOR('',#135639,1.); +#135639 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#135640 = ORIENTED_EDGE('',*,*,#135641,.T.); +#135641 = EDGE_CURVE('',#135634,#135642,#135644,.T.); +#135642 = VERTEX_POINT('',#135643); +#135643 = CARTESIAN_POINT('',(164.248974,-125.466415,1.585)); +#135644 = CIRCLE('',#135645,0.348632713765); +#135645 = AXIS2_PLACEMENT_3D('',#135646,#135647,#135648); +#135646 = CARTESIAN_POINT('',(164.16120597394,-125.1290108762,1.585)); +#135647 = DIRECTION('',(0.,0.,-1.)); +#135648 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#135649 = ORIENTED_EDGE('',*,*,#135650,.T.); +#135650 = EDGE_CURVE('',#135642,#135651,#135653,.T.); +#135651 = VERTEX_POINT('',#135652); +#135652 = CARTESIAN_POINT('',(163.928818,-125.465193,1.585)); +#135653 = LINE('',#135654,#135655); +#135654 = CARTESIAN_POINT('',(164.248974,-125.466415,1.585)); +#135655 = VECTOR('',#135656,1.); +#135656 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#135657 = ORIENTED_EDGE('',*,*,#135658,.T.); +#135658 = EDGE_CURVE('',#135651,#135659,#135661,.T.); +#135659 = VERTEX_POINT('',#135660); +#135660 = CARTESIAN_POINT('',(163.684593,-125.217012,1.585)); +#135661 = CIRCLE('',#135662,0.348628078749); +#135662 = AXIS2_PLACEMENT_3D('',#135663,#135664,#135665); +#135663 = CARTESIAN_POINT('',(164.0219930302,-125.1292466485,1.585)); +#135664 = DIRECTION('',(0.,0.,-1.)); +#135665 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#135666 = ORIENTED_EDGE('',*,*,#135667,.T.); +#135667 = EDGE_CURVE('',#135659,#135668,#135670,.T.); +#135668 = VERTEX_POINT('',#135669); +#135669 = CARTESIAN_POINT('',(163.685815,-124.992095,1.585)); +#135670 = LINE('',#135671,#135672); +#135671 = CARTESIAN_POINT('',(163.684593,-125.217012,1.585)); +#135672 = VECTOR('',#135673,1.); +#135673 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#135674 = ORIENTED_EDGE('',*,*,#135675,.T.); +#135675 = EDGE_CURVE('',#135668,#135676,#135678,.T.); +#135676 = VERTEX_POINT('',#135677); +#135677 = CARTESIAN_POINT('',(163.746521,-124.870682,1.585)); +#135678 = LINE('',#135679,#135680); +#135679 = CARTESIAN_POINT('',(163.685815,-124.992095,1.585)); +#135680 = VECTOR('',#135681,1.); +#135681 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#135682 = ORIENTED_EDGE('',*,*,#135683,.T.); +#135683 = EDGE_CURVE('',#135676,#135684,#135686,.T.); +#135684 = VERTEX_POINT('',#135685); +#135685 = CARTESIAN_POINT('',(163.872853,-124.950207,1.585)); +#135686 = CIRCLE('',#135687,7.500029440362E-02); +#135687 = AXIS2_PLACEMENT_3D('',#135688,#135689,#135690); +#135688 = CARTESIAN_POINT('',(163.80577064867,-124.916665946,1.585)); +#135689 = DIRECTION('',(0.,0.,-1.)); +#135690 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#135691 = ORIENTED_EDGE('',*,*,#135692,.T.); +#135692 = EDGE_CURVE('',#135684,#135693,#135695,.T.); +#135693 = VERTEX_POINT('',#135694); +#135694 = CARTESIAN_POINT('',(163.833152,-125.029609,1.585)); +#135695 = LINE('',#135696,#135697); +#135696 = CARTESIAN_POINT('',(163.872853,-124.950207,1.585)); +#135697 = VECTOR('',#135698,1.); +#135698 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135699 = ORIENTED_EDGE('',*,*,#135700,.T.); +#135700 = EDGE_CURVE('',#135693,#135701,#135703,.T.); +#135701 = VERTEX_POINT('',#135702); +#135702 = CARTESIAN_POINT('',(163.833152,-125.184675,1.585)); +#135703 = LINE('',#135704,#135705); +#135704 = CARTESIAN_POINT('',(163.833152,-125.029609,1.585)); +#135705 = VECTOR('',#135706,1.); +#135706 = DIRECTION('',(0.,-1.,0.)); +#135707 = ORIENTED_EDGE('',*,*,#135708,.T.); +#135708 = EDGE_CURVE('',#135701,#135709,#135711,.T.); +#135709 = VERTEX_POINT('',#135710); +#135710 = CARTESIAN_POINT('',(163.966333,-125.317856,1.585)); +#135711 = CIRCLE('',#135712,0.18686440374); +#135712 = AXIS2_PLACEMENT_3D('',#135713,#135714,#135715); +#135713 = CARTESIAN_POINT('',(164.013869,-125.137139,1.585)); +#135714 = DIRECTION('',(0.,0.,1.)); +#135715 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#135716 = ORIENTED_EDGE('',*,*,#135717,.T.); +#135717 = EDGE_CURVE('',#135709,#135718,#135720,.T.); +#135718 = VERTEX_POINT('',#135719); +#135719 = CARTESIAN_POINT('',(164.216637,-125.317856,1.585)); +#135720 = LINE('',#135721,#135722); +#135721 = CARTESIAN_POINT('',(163.966333,-125.317856,1.585)); +#135722 = VECTOR('',#135723,1.); +#135723 = DIRECTION('',(1.,0.,0.)); +#135724 = ORIENTED_EDGE('',*,*,#135725,.T.); +#135725 = EDGE_CURVE('',#135718,#135726,#135728,.T.); +#135726 = VERTEX_POINT('',#135727); +#135727 = CARTESIAN_POINT('',(164.349819,-125.184675,1.585)); +#135728 = CIRCLE('',#135729,0.186872595955); +#135729 = AXIS2_PLACEMENT_3D('',#135730,#135731,#135732); +#135730 = CARTESIAN_POINT('',(164.16909536766,-125.1371320106,1.585)); +#135731 = DIRECTION('',(0.,0.,1.)); +#135732 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#135733 = ORIENTED_EDGE('',*,*,#135734,.T.); +#135734 = EDGE_CURVE('',#135726,#135735,#135737,.T.); +#135735 = VERTEX_POINT('',#135736); +#135736 = CARTESIAN_POINT('',(164.349819,-125.029609,1.585)); +#135737 = LINE('',#135738,#135739); +#135738 = CARTESIAN_POINT('',(164.349819,-125.184675,1.585)); +#135739 = VECTOR('',#135740,1.); +#135740 = DIRECTION('',(0.,1.,0.)); +#135741 = ORIENTED_EDGE('',*,*,#135742,.T.); +#135742 = EDGE_CURVE('',#135735,#135743,#135745,.T.); +#135743 = VERTEX_POINT('',#135744); +#135744 = CARTESIAN_POINT('',(164.304863,-124.936475,1.585)); +#135745 = LINE('',#135746,#135747); +#135746 = CARTESIAN_POINT('',(164.349819,-125.029609,1.585)); +#135747 = VECTOR('',#135748,1.); +#135748 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#135749 = ORIENTED_EDGE('',*,*,#135750,.T.); +#135750 = EDGE_CURVE('',#135743,#135751,#135753,.T.); +#135751 = VERTEX_POINT('',#135752); +#135752 = CARTESIAN_POINT('',(164.444282,-124.883125,1.585)); +#135753 = CIRCLE('',#135754,7.500016685594E-02); +#135754 = AXIS2_PLACEMENT_3D('',#135755,#135756,#135757); +#135755 = CARTESIAN_POINT('',(164.3772000864,-124.9166666442,1.585)); +#135756 = DIRECTION('',(0.,0.,-1.)); +#135757 = DIRECTION('',(-0.964492339665,-0.264110822816,-0.)); +#135758 = ORIENTED_EDGE('',*,*,#135759,.T.); +#135759 = EDGE_CURVE('',#135751,#135632,#135760,.T.); +#135760 = LINE('',#135761,#135762); +#135761 = CARTESIAN_POINT('',(164.444282,-124.883125,1.585)); +#135762 = VECTOR('',#135763,1.); +#135763 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#135764 = PLANE('',#135765); +#135765 = AXIS2_PLACEMENT_3D('',#135766,#135767,#135768); +#135766 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135767 = DIRECTION('',(0.,0.,1.)); +#135768 = DIRECTION('',(1.,0.,-0.)); +#135769 = SHELL_BASED_SURFACE_MODEL('',(#135770)); +#135770 = OPEN_SHELL('',(#135771)); +#135771 = ADVANCED_FACE('',(#135772),#135816,.T.); +#135772 = FACE_BOUND('',#135773,.F.); +#135773 = EDGE_LOOP('',(#135774,#135785,#135793,#135802,#135810)); +#135774 = ORIENTED_EDGE('',*,*,#135775,.T.); +#135775 = EDGE_CURVE('',#135776,#135778,#135780,.T.); +#135776 = VERTEX_POINT('',#135777); +#135777 = CARTESIAN_POINT('',(160.847067,-124.489781,1.585)); +#135778 = VERTEX_POINT('',#135779); +#135779 = CARTESIAN_POINT('',(160.9625,-124.512742,1.585)); +#135780 = CIRCLE('',#135781,6.000007318647E-02); +#135781 = AXIS2_PLACEMENT_3D('',#135782,#135783,#135784); +#135782 = CARTESIAN_POINT('',(160.90249992681,-124.5127418233,1.585)); +#135783 = DIRECTION('',(0.,0.,-1.)); +#135784 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135785 = ORIENTED_EDGE('',*,*,#135786,.T.); +#135786 = EDGE_CURVE('',#135778,#135787,#135789,.T.); +#135787 = VERTEX_POINT('',#135788); +#135788 = CARTESIAN_POINT('',(160.9625,-124.987258,1.585)); +#135789 = LINE('',#135790,#135791); +#135790 = CARTESIAN_POINT('',(160.9625,-124.512742,1.585)); +#135791 = VECTOR('',#135792,1.); +#135792 = DIRECTION('',(0.,-1.,0.)); +#135793 = ORIENTED_EDGE('',*,*,#135794,.T.); +#135794 = EDGE_CURVE('',#135787,#135795,#135797,.T.); +#135795 = VERTEX_POINT('',#135796); +#135796 = CARTESIAN_POINT('',(160.8425,-124.987258,1.585)); +#135797 = CIRCLE('',#135798,6.000000000043E-02); +#135798 = AXIS2_PLACEMENT_3D('',#135799,#135800,#135801); +#135799 = CARTESIAN_POINT('',(160.9025,-124.9872582255,1.585)); +#135800 = DIRECTION('',(0.,0.,-1.)); +#135801 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135802 = ORIENTED_EDGE('',*,*,#135803,.T.); +#135803 = EDGE_CURVE('',#135795,#135804,#135806,.T.); +#135804 = VERTEX_POINT('',#135805); +#135805 = CARTESIAN_POINT('',(160.8425,-124.512742,1.585)); +#135806 = LINE('',#135807,#135808); +#135807 = CARTESIAN_POINT('',(160.8425,-124.987258,1.585)); +#135808 = VECTOR('',#135809,1.); +#135809 = DIRECTION('',(0.,1.,0.)); +#135810 = ORIENTED_EDGE('',*,*,#135811,.T.); +#135811 = EDGE_CURVE('',#135804,#135776,#135812,.T.); +#135812 = LINE('',#135813,#135814); +#135813 = CARTESIAN_POINT('',(160.8425,-124.512742,1.585)); +#135814 = VECTOR('',#135815,1.); +#135815 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#135816 = PLANE('',#135817); +#135817 = AXIS2_PLACEMENT_3D('',#135818,#135819,#135820); +#135818 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135819 = DIRECTION('',(0.,0.,1.)); +#135820 = DIRECTION('',(1.,0.,-0.)); +#135821 = SHELL_BASED_SURFACE_MODEL('',(#135822)); +#135822 = OPEN_SHELL('',(#135823)); +#135823 = ADVANCED_FACE('',(#135824),#135868,.T.); +#135824 = FACE_BOUND('',#135825,.F.); +#135825 = EDGE_LOOP('',(#135826,#135837,#135845,#135854,#135862)); +#135826 = ORIENTED_EDGE('',*,*,#135827,.T.); +#135827 = EDGE_CURVE('',#135828,#135830,#135832,.T.); +#135828 = VERTEX_POINT('',#135829); +#135829 = CARTESIAN_POINT('',(161.892067,-124.489781,1.585)); +#135830 = VERTEX_POINT('',#135831); +#135831 = CARTESIAN_POINT('',(162.0075,-124.512742,1.585)); +#135832 = CIRCLE('',#135833,6.000007318647E-02); +#135833 = AXIS2_PLACEMENT_3D('',#135834,#135835,#135836); +#135834 = CARTESIAN_POINT('',(161.94749992681,-124.5127418233,1.585)); +#135835 = DIRECTION('',(0.,0.,-1.)); +#135836 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135837 = ORIENTED_EDGE('',*,*,#135838,.T.); +#135838 = EDGE_CURVE('',#135830,#135839,#135841,.T.); +#135839 = VERTEX_POINT('',#135840); +#135840 = CARTESIAN_POINT('',(162.0075,-124.987258,1.585)); +#135841 = LINE('',#135842,#135843); +#135842 = CARTESIAN_POINT('',(162.0075,-124.512742,1.585)); +#135843 = VECTOR('',#135844,1.); +#135844 = DIRECTION('',(0.,-1.,0.)); +#135845 = ORIENTED_EDGE('',*,*,#135846,.T.); +#135846 = EDGE_CURVE('',#135839,#135847,#135849,.T.); +#135847 = VERTEX_POINT('',#135848); +#135848 = CARTESIAN_POINT('',(161.8875,-124.987258,1.585)); +#135849 = CIRCLE('',#135850,6.000000000043E-02); +#135850 = AXIS2_PLACEMENT_3D('',#135851,#135852,#135853); +#135851 = CARTESIAN_POINT('',(161.9475,-124.9872582255,1.585)); +#135852 = DIRECTION('',(0.,0.,-1.)); +#135853 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135854 = ORIENTED_EDGE('',*,*,#135855,.T.); +#135855 = EDGE_CURVE('',#135847,#135856,#135858,.T.); +#135856 = VERTEX_POINT('',#135857); +#135857 = CARTESIAN_POINT('',(161.8875,-124.512742,1.585)); +#135858 = LINE('',#135859,#135860); +#135859 = CARTESIAN_POINT('',(161.8875,-124.987258,1.585)); +#135860 = VECTOR('',#135861,1.); +#135861 = DIRECTION('',(0.,1.,0.)); +#135862 = ORIENTED_EDGE('',*,*,#135863,.T.); +#135863 = EDGE_CURVE('',#135856,#135828,#135864,.T.); +#135864 = LINE('',#135865,#135866); +#135865 = CARTESIAN_POINT('',(161.8875,-124.512742,1.585)); +#135866 = VECTOR('',#135867,1.); +#135867 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#135868 = PLANE('',#135869); +#135869 = AXIS2_PLACEMENT_3D('',#135870,#135871,#135872); +#135870 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135871 = DIRECTION('',(0.,0.,1.)); +#135872 = DIRECTION('',(1.,0.,-0.)); +#135873 = SHELL_BASED_SURFACE_MODEL('',(#135874)); +#135874 = OPEN_SHELL('',(#135875)); +#135875 = ADVANCED_FACE('',(#135876),#135920,.T.); +#135876 = FACE_BOUND('',#135877,.F.); +#135877 = EDGE_LOOP('',(#135878,#135889,#135897,#135906,#135914)); +#135878 = ORIENTED_EDGE('',*,*,#135879,.T.); +#135879 = EDGE_CURVE('',#135880,#135882,#135884,.T.); +#135880 = VERTEX_POINT('',#135881); +#135881 = CARTESIAN_POINT('',(164.822067,-124.489781,1.585)); +#135882 = VERTEX_POINT('',#135883); +#135883 = CARTESIAN_POINT('',(164.9375,-124.512742,1.585)); +#135884 = CIRCLE('',#135885,6.000007318647E-02); +#135885 = AXIS2_PLACEMENT_3D('',#135886,#135887,#135888); +#135886 = CARTESIAN_POINT('',(164.87749992681,-124.5127418233,1.585)); +#135887 = DIRECTION('',(0.,0.,-1.)); +#135888 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135889 = ORIENTED_EDGE('',*,*,#135890,.T.); +#135890 = EDGE_CURVE('',#135882,#135891,#135893,.T.); +#135891 = VERTEX_POINT('',#135892); +#135892 = CARTESIAN_POINT('',(164.9375,-124.987258,1.585)); +#135893 = LINE('',#135894,#135895); +#135894 = CARTESIAN_POINT('',(164.9375,-124.512742,1.585)); +#135895 = VECTOR('',#135896,1.); +#135896 = DIRECTION('',(0.,-1.,0.)); +#135897 = ORIENTED_EDGE('',*,*,#135898,.T.); +#135898 = EDGE_CURVE('',#135891,#135899,#135901,.T.); +#135899 = VERTEX_POINT('',#135900); +#135900 = CARTESIAN_POINT('',(164.8175,-124.987258,1.585)); +#135901 = CIRCLE('',#135902,6.000000000043E-02); +#135902 = AXIS2_PLACEMENT_3D('',#135903,#135904,#135905); +#135903 = CARTESIAN_POINT('',(164.8775,-124.9872582255,1.585)); +#135904 = DIRECTION('',(0.,0.,-1.)); +#135905 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135906 = ORIENTED_EDGE('',*,*,#135907,.T.); +#135907 = EDGE_CURVE('',#135899,#135908,#135910,.T.); +#135908 = VERTEX_POINT('',#135909); +#135909 = CARTESIAN_POINT('',(164.8175,-124.512742,1.585)); +#135910 = LINE('',#135911,#135912); +#135911 = CARTESIAN_POINT('',(164.8175,-124.987258,1.585)); +#135912 = VECTOR('',#135913,1.); +#135913 = DIRECTION('',(0.,1.,0.)); +#135914 = ORIENTED_EDGE('',*,*,#135915,.T.); +#135915 = EDGE_CURVE('',#135908,#135880,#135916,.T.); +#135916 = LINE('',#135917,#135918); +#135917 = CARTESIAN_POINT('',(164.8175,-124.512742,1.585)); +#135918 = VECTOR('',#135919,1.); +#135919 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#135920 = PLANE('',#135921); +#135921 = AXIS2_PLACEMENT_3D('',#135922,#135923,#135924); +#135922 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135923 = DIRECTION('',(0.,0.,1.)); +#135924 = DIRECTION('',(1.,0.,-0.)); +#135925 = SHELL_BASED_SURFACE_MODEL('',(#135926)); +#135926 = OPEN_SHELL('',(#135927)); +#135927 = ADVANCED_FACE('',(#135928),#135972,.T.); +#135928 = FACE_BOUND('',#135929,.F.); +#135929 = EDGE_LOOP('',(#135930,#135941,#135949,#135958,#135966)); +#135930 = ORIENTED_EDGE('',*,*,#135931,.T.); +#135931 = EDGE_CURVE('',#135932,#135934,#135936,.T.); +#135932 = VERTEX_POINT('',#135933); +#135933 = CARTESIAN_POINT('',(165.867067,-124.489781,1.585)); +#135934 = VERTEX_POINT('',#135935); +#135935 = CARTESIAN_POINT('',(165.9825,-124.512742,1.585)); +#135936 = CIRCLE('',#135937,6.000007318647E-02); +#135937 = AXIS2_PLACEMENT_3D('',#135938,#135939,#135940); +#135938 = CARTESIAN_POINT('',(165.92249992681,-124.5127418233,1.585)); +#135939 = DIRECTION('',(0.,0.,-1.)); +#135940 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135941 = ORIENTED_EDGE('',*,*,#135942,.T.); +#135942 = EDGE_CURVE('',#135934,#135943,#135945,.T.); +#135943 = VERTEX_POINT('',#135944); +#135944 = CARTESIAN_POINT('',(165.9825,-124.987258,1.585)); +#135945 = LINE('',#135946,#135947); +#135946 = CARTESIAN_POINT('',(165.9825,-124.512742,1.585)); +#135947 = VECTOR('',#135948,1.); +#135948 = DIRECTION('',(0.,-1.,0.)); +#135949 = ORIENTED_EDGE('',*,*,#135950,.T.); +#135950 = EDGE_CURVE('',#135943,#135951,#135953,.T.); +#135951 = VERTEX_POINT('',#135952); +#135952 = CARTESIAN_POINT('',(165.8625,-124.987258,1.585)); +#135953 = CIRCLE('',#135954,6.000000000042E-02); +#135954 = AXIS2_PLACEMENT_3D('',#135955,#135956,#135957); +#135955 = CARTESIAN_POINT('',(165.9225,-124.9872582255,1.585)); +#135956 = DIRECTION('',(0.,0.,-1.)); +#135957 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135958 = ORIENTED_EDGE('',*,*,#135959,.T.); +#135959 = EDGE_CURVE('',#135951,#135960,#135962,.T.); +#135960 = VERTEX_POINT('',#135961); +#135961 = CARTESIAN_POINT('',(165.8625,-124.512742,1.585)); +#135962 = LINE('',#135963,#135964); +#135963 = CARTESIAN_POINT('',(165.8625,-124.987258,1.585)); +#135964 = VECTOR('',#135965,1.); +#135965 = DIRECTION('',(0.,1.,0.)); +#135966 = ORIENTED_EDGE('',*,*,#135967,.T.); +#135967 = EDGE_CURVE('',#135960,#135932,#135968,.T.); +#135968 = LINE('',#135969,#135970); +#135969 = CARTESIAN_POINT('',(165.8625,-124.512742,1.585)); +#135970 = VECTOR('',#135971,1.); +#135971 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#135972 = PLANE('',#135973); +#135973 = AXIS2_PLACEMENT_3D('',#135974,#135975,#135976); +#135974 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135975 = DIRECTION('',(0.,0.,1.)); +#135976 = DIRECTION('',(1.,0.,-0.)); +#135977 = SHELL_BASED_SURFACE_MODEL('',(#135978)); +#135978 = OPEN_SHELL('',(#135979)); +#135979 = ADVANCED_FACE('',(#135980),#136116,.T.); +#135980 = FACE_BOUND('',#135981,.F.); +#135981 = EDGE_LOOP('',(#135982,#135992,#136001,#136009,#136018,#136026, + #136034,#136043,#136051,#136059,#136068,#136076,#136085,#136093, + #136101,#136110)); +#135982 = ORIENTED_EDGE('',*,*,#135983,.T.); +#135983 = EDGE_CURVE('',#135984,#135986,#135988,.T.); +#135984 = VERTEX_POINT('',#135985); +#135985 = CARTESIAN_POINT('',(160.523378,-124.140129,1.585)); +#135986 = VERTEX_POINT('',#135987); +#135987 = CARTESIAN_POINT('',(160.522156,-124.365047,1.585)); +#135988 = LINE('',#135989,#135990); +#135989 = CARTESIAN_POINT('',(160.523378,-124.140129,1.585)); +#135990 = VECTOR('',#135991,1.); +#135991 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#135992 = ORIENTED_EDGE('',*,*,#135993,.T.); +#135993 = EDGE_CURVE('',#135986,#135994,#135996,.T.); +#135994 = VERTEX_POINT('',#135995); +#135995 = CARTESIAN_POINT('',(160.273974,-124.609272,1.585)); +#135996 = CIRCLE('',#135997,0.348632713765); +#135997 = AXIS2_PLACEMENT_3D('',#135998,#135999,#136000); +#135998 = CARTESIAN_POINT('',(160.18620597394,-124.2718678762,1.585)); +#135999 = DIRECTION('',(0.,0.,-1.)); +#136000 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#136001 = ORIENTED_EDGE('',*,*,#136002,.T.); +#136002 = EDGE_CURVE('',#135994,#136003,#136005,.T.); +#136003 = VERTEX_POINT('',#136004); +#136004 = CARTESIAN_POINT('',(159.953818,-124.60805,1.585)); +#136005 = LINE('',#136006,#136007); +#136006 = CARTESIAN_POINT('',(160.273974,-124.609272,1.585)); +#136007 = VECTOR('',#136008,1.); +#136008 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#136009 = ORIENTED_EDGE('',*,*,#136010,.T.); +#136010 = EDGE_CURVE('',#136003,#136011,#136013,.T.); +#136011 = VERTEX_POINT('',#136012); +#136012 = CARTESIAN_POINT('',(159.709593,-124.359869,1.585)); +#136013 = CIRCLE('',#136014,0.348628078749); +#136014 = AXIS2_PLACEMENT_3D('',#136015,#136016,#136017); +#136015 = CARTESIAN_POINT('',(160.0469930302,-124.2721036485,1.585)); +#136016 = DIRECTION('',(0.,0.,-1.)); +#136017 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#136018 = ORIENTED_EDGE('',*,*,#136019,.T.); +#136019 = EDGE_CURVE('',#136011,#136020,#136022,.T.); +#136020 = VERTEX_POINT('',#136021); +#136021 = CARTESIAN_POINT('',(159.710815,-124.134952,1.585)); +#136022 = LINE('',#136023,#136024); +#136023 = CARTESIAN_POINT('',(159.709593,-124.359869,1.585)); +#136024 = VECTOR('',#136025,1.); +#136025 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#136026 = ORIENTED_EDGE('',*,*,#136027,.T.); +#136027 = EDGE_CURVE('',#136020,#136028,#136030,.T.); +#136028 = VERTEX_POINT('',#136029); +#136029 = CARTESIAN_POINT('',(159.771521,-124.013539,1.585)); +#136030 = LINE('',#136031,#136032); +#136031 = CARTESIAN_POINT('',(159.710815,-124.134952,1.585)); +#136032 = VECTOR('',#136033,1.); +#136033 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#136034 = ORIENTED_EDGE('',*,*,#136035,.T.); +#136035 = EDGE_CURVE('',#136028,#136036,#136038,.T.); +#136036 = VERTEX_POINT('',#136037); +#136037 = CARTESIAN_POINT('',(159.897853,-124.093064,1.585)); +#136038 = CIRCLE('',#136039,7.500029440361E-02); +#136039 = AXIS2_PLACEMENT_3D('',#136040,#136041,#136042); +#136040 = CARTESIAN_POINT('',(159.83077064867,-124.059522946,1.585)); +#136041 = DIRECTION('',(0.,0.,-1.)); +#136042 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#136043 = ORIENTED_EDGE('',*,*,#136044,.T.); +#136044 = EDGE_CURVE('',#136036,#136045,#136047,.T.); +#136045 = VERTEX_POINT('',#136046); +#136046 = CARTESIAN_POINT('',(159.858152,-124.172466,1.585)); +#136047 = LINE('',#136048,#136049); +#136048 = CARTESIAN_POINT('',(159.897853,-124.093064,1.585)); +#136049 = VECTOR('',#136050,1.); +#136050 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#136051 = ORIENTED_EDGE('',*,*,#136052,.T.); +#136052 = EDGE_CURVE('',#136045,#136053,#136055,.T.); +#136053 = VERTEX_POINT('',#136054); +#136054 = CARTESIAN_POINT('',(159.858152,-124.327532,1.585)); +#136055 = LINE('',#136056,#136057); +#136056 = CARTESIAN_POINT('',(159.858152,-124.172466,1.585)); +#136057 = VECTOR('',#136058,1.); +#136058 = DIRECTION('',(0.,-1.,0.)); +#136059 = ORIENTED_EDGE('',*,*,#136060,.T.); +#136060 = EDGE_CURVE('',#136053,#136061,#136063,.T.); +#136061 = VERTEX_POINT('',#136062); +#136062 = CARTESIAN_POINT('',(159.991333,-124.460713,1.585)); +#136063 = CIRCLE('',#136064,0.18686440374); +#136064 = AXIS2_PLACEMENT_3D('',#136065,#136066,#136067); +#136065 = CARTESIAN_POINT('',(160.038869,-124.279996,1.585)); +#136066 = DIRECTION('',(0.,0.,1.)); +#136067 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#136068 = ORIENTED_EDGE('',*,*,#136069,.T.); +#136069 = EDGE_CURVE('',#136061,#136070,#136072,.T.); +#136070 = VERTEX_POINT('',#136071); +#136071 = CARTESIAN_POINT('',(160.241637,-124.460713,1.585)); +#136072 = LINE('',#136073,#136074); +#136073 = CARTESIAN_POINT('',(159.991333,-124.460713,1.585)); +#136074 = VECTOR('',#136075,1.); +#136075 = DIRECTION('',(1.,0.,0.)); +#136076 = ORIENTED_EDGE('',*,*,#136077,.T.); +#136077 = EDGE_CURVE('',#136070,#136078,#136080,.T.); +#136078 = VERTEX_POINT('',#136079); +#136079 = CARTESIAN_POINT('',(160.374819,-124.327532,1.585)); +#136080 = CIRCLE('',#136081,0.186872595955); +#136081 = AXIS2_PLACEMENT_3D('',#136082,#136083,#136084); +#136082 = CARTESIAN_POINT('',(160.19409536766,-124.2799890106,1.585)); +#136083 = DIRECTION('',(0.,0.,1.)); +#136084 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#136085 = ORIENTED_EDGE('',*,*,#136086,.T.); +#136086 = EDGE_CURVE('',#136078,#136087,#136089,.T.); +#136087 = VERTEX_POINT('',#136088); +#136088 = CARTESIAN_POINT('',(160.374819,-124.172466,1.585)); +#136089 = LINE('',#136090,#136091); +#136090 = CARTESIAN_POINT('',(160.374819,-124.327532,1.585)); +#136091 = VECTOR('',#136092,1.); +#136092 = DIRECTION('',(0.,1.,0.)); +#136093 = ORIENTED_EDGE('',*,*,#136094,.T.); +#136094 = EDGE_CURVE('',#136087,#136095,#136097,.T.); +#136095 = VERTEX_POINT('',#136096); +#136096 = CARTESIAN_POINT('',(160.329863,-124.079332,1.585)); +#136097 = LINE('',#136098,#136099); +#136098 = CARTESIAN_POINT('',(160.374819,-124.172466,1.585)); +#136099 = VECTOR('',#136100,1.); +#136100 = DIRECTION('',(-0.43470796245,0.900571478219,0.)); +#136101 = ORIENTED_EDGE('',*,*,#136102,.T.); +#136102 = EDGE_CURVE('',#136095,#136103,#136105,.T.); +#136103 = VERTEX_POINT('',#136104); +#136104 = CARTESIAN_POINT('',(160.469282,-124.025982,1.585)); +#136105 = CIRCLE('',#136106,7.500016685596E-02); +#136106 = AXIS2_PLACEMENT_3D('',#136107,#136108,#136109); +#136107 = CARTESIAN_POINT('',(160.4022000864,-124.0595236442,1.585)); +#136108 = DIRECTION('',(0.,0.,-1.)); +#136109 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#136110 = ORIENTED_EDGE('',*,*,#136111,.T.); +#136111 = EDGE_CURVE('',#136103,#135984,#136112,.T.); +#136112 = LINE('',#136113,#136114); +#136113 = CARTESIAN_POINT('',(160.469282,-124.025982,1.585)); +#136114 = VECTOR('',#136115,1.); +#136115 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#136116 = PLANE('',#136117); +#136117 = AXIS2_PLACEMENT_3D('',#136118,#136119,#136120); +#136118 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136119 = DIRECTION('',(0.,0.,1.)); +#136120 = DIRECTION('',(1.,0.,-0.)); +#136121 = SHELL_BASED_SURFACE_MODEL('',(#136122)); +#136122 = OPEN_SHELL('',(#136123)); +#136123 = ADVANCED_FACE('',(#136124),#136260,.T.); +#136124 = FACE_BOUND('',#136125,.F.); +#136125 = EDGE_LOOP('',(#136126,#136136,#136145,#136153,#136162,#136170, + #136178,#136187,#136195,#136203,#136212,#136220,#136229,#136237, + #136245,#136254)); +#136126 = ORIENTED_EDGE('',*,*,#136127,.T.); +#136127 = EDGE_CURVE('',#136128,#136130,#136132,.T.); +#136128 = VERTEX_POINT('',#136129); +#136129 = CARTESIAN_POINT('',(164.498378,-124.140129,1.585)); +#136130 = VERTEX_POINT('',#136131); +#136131 = CARTESIAN_POINT('',(164.497156,-124.365047,1.585)); +#136132 = LINE('',#136133,#136134); +#136133 = CARTESIAN_POINT('',(164.498378,-124.140129,1.585)); +#136134 = VECTOR('',#136135,1.); +#136135 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#136136 = ORIENTED_EDGE('',*,*,#136137,.T.); +#136137 = EDGE_CURVE('',#136130,#136138,#136140,.T.); +#136138 = VERTEX_POINT('',#136139); +#136139 = CARTESIAN_POINT('',(164.248974,-124.609272,1.585)); +#136140 = CIRCLE('',#136141,0.348632713765); +#136141 = AXIS2_PLACEMENT_3D('',#136142,#136143,#136144); +#136142 = CARTESIAN_POINT('',(164.16120597394,-124.2718678762,1.585)); +#136143 = DIRECTION('',(0.,0.,-1.)); +#136144 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#136145 = ORIENTED_EDGE('',*,*,#136146,.T.); +#136146 = EDGE_CURVE('',#136138,#136147,#136149,.T.); +#136147 = VERTEX_POINT('',#136148); +#136148 = CARTESIAN_POINT('',(163.928818,-124.60805,1.585)); +#136149 = LINE('',#136150,#136151); +#136150 = CARTESIAN_POINT('',(164.248974,-124.609272,1.585)); +#136151 = VECTOR('',#136152,1.); +#136152 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#136153 = ORIENTED_EDGE('',*,*,#136154,.T.); +#136154 = EDGE_CURVE('',#136147,#136155,#136157,.T.); +#136155 = VERTEX_POINT('',#136156); +#136156 = CARTESIAN_POINT('',(163.684593,-124.359869,1.585)); +#136157 = CIRCLE('',#136158,0.348628078749); +#136158 = AXIS2_PLACEMENT_3D('',#136159,#136160,#136161); +#136159 = CARTESIAN_POINT('',(164.0219930302,-124.2721036485,1.585)); +#136160 = DIRECTION('',(0.,0.,-1.)); +#136161 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#136162 = ORIENTED_EDGE('',*,*,#136163,.T.); +#136163 = EDGE_CURVE('',#136155,#136164,#136166,.T.); +#136164 = VERTEX_POINT('',#136165); +#136165 = CARTESIAN_POINT('',(163.685815,-124.134952,1.585)); +#136166 = LINE('',#136167,#136168); +#136167 = CARTESIAN_POINT('',(163.684593,-124.359869,1.585)); +#136168 = VECTOR('',#136169,1.); +#136169 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#136170 = ORIENTED_EDGE('',*,*,#136171,.T.); +#136171 = EDGE_CURVE('',#136164,#136172,#136174,.T.); +#136172 = VERTEX_POINT('',#136173); +#136173 = CARTESIAN_POINT('',(163.746521,-124.013539,1.585)); +#136174 = LINE('',#136175,#136176); +#136175 = CARTESIAN_POINT('',(163.685815,-124.134952,1.585)); +#136176 = VECTOR('',#136177,1.); +#136177 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#136178 = ORIENTED_EDGE('',*,*,#136179,.T.); +#136179 = EDGE_CURVE('',#136172,#136180,#136182,.T.); +#136180 = VERTEX_POINT('',#136181); +#136181 = CARTESIAN_POINT('',(163.872853,-124.093064,1.585)); +#136182 = CIRCLE('',#136183,7.500029440362E-02); +#136183 = AXIS2_PLACEMENT_3D('',#136184,#136185,#136186); +#136184 = CARTESIAN_POINT('',(163.80577064867,-124.059522946,1.585)); +#136185 = DIRECTION('',(0.,0.,-1.)); +#136186 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#136187 = ORIENTED_EDGE('',*,*,#136188,.T.); +#136188 = EDGE_CURVE('',#136180,#136189,#136191,.T.); +#136189 = VERTEX_POINT('',#136190); +#136190 = CARTESIAN_POINT('',(163.833152,-124.172466,1.585)); +#136191 = LINE('',#136192,#136193); +#136192 = CARTESIAN_POINT('',(163.872853,-124.093064,1.585)); +#136193 = VECTOR('',#136194,1.); +#136194 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#136195 = ORIENTED_EDGE('',*,*,#136196,.T.); +#136196 = EDGE_CURVE('',#136189,#136197,#136199,.T.); +#136197 = VERTEX_POINT('',#136198); +#136198 = CARTESIAN_POINT('',(163.833152,-124.327532,1.585)); +#136199 = LINE('',#136200,#136201); +#136200 = CARTESIAN_POINT('',(163.833152,-124.172466,1.585)); +#136201 = VECTOR('',#136202,1.); +#136202 = DIRECTION('',(0.,-1.,0.)); +#136203 = ORIENTED_EDGE('',*,*,#136204,.T.); +#136204 = EDGE_CURVE('',#136197,#136205,#136207,.T.); +#136205 = VERTEX_POINT('',#136206); +#136206 = CARTESIAN_POINT('',(163.966333,-124.460713,1.585)); +#136207 = CIRCLE('',#136208,0.18686440374); +#136208 = AXIS2_PLACEMENT_3D('',#136209,#136210,#136211); +#136209 = CARTESIAN_POINT('',(164.013869,-124.279996,1.585)); +#136210 = DIRECTION('',(0.,0.,1.)); +#136211 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#136212 = ORIENTED_EDGE('',*,*,#136213,.T.); +#136213 = EDGE_CURVE('',#136205,#136214,#136216,.T.); +#136214 = VERTEX_POINT('',#136215); +#136215 = CARTESIAN_POINT('',(164.216637,-124.460713,1.585)); +#136216 = LINE('',#136217,#136218); +#136217 = CARTESIAN_POINT('',(163.966333,-124.460713,1.585)); +#136218 = VECTOR('',#136219,1.); +#136219 = DIRECTION('',(1.,0.,0.)); +#136220 = ORIENTED_EDGE('',*,*,#136221,.T.); +#136221 = EDGE_CURVE('',#136214,#136222,#136224,.T.); +#136222 = VERTEX_POINT('',#136223); +#136223 = CARTESIAN_POINT('',(164.349819,-124.327532,1.585)); +#136224 = CIRCLE('',#136225,0.186872595955); +#136225 = AXIS2_PLACEMENT_3D('',#136226,#136227,#136228); +#136226 = CARTESIAN_POINT('',(164.16909536766,-124.2799890106,1.585)); +#136227 = DIRECTION('',(0.,0.,1.)); +#136228 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#136229 = ORIENTED_EDGE('',*,*,#136230,.T.); +#136230 = EDGE_CURVE('',#136222,#136231,#136233,.T.); +#136231 = VERTEX_POINT('',#136232); +#136232 = CARTESIAN_POINT('',(164.349819,-124.172466,1.585)); +#136233 = LINE('',#136234,#136235); +#136234 = CARTESIAN_POINT('',(164.349819,-124.327532,1.585)); +#136235 = VECTOR('',#136236,1.); +#136236 = DIRECTION('',(0.,1.,0.)); +#136237 = ORIENTED_EDGE('',*,*,#136238,.T.); +#136238 = EDGE_CURVE('',#136231,#136239,#136241,.T.); +#136239 = VERTEX_POINT('',#136240); +#136240 = CARTESIAN_POINT('',(164.304863,-124.079332,1.585)); +#136241 = LINE('',#136242,#136243); +#136242 = CARTESIAN_POINT('',(164.349819,-124.172466,1.585)); +#136243 = VECTOR('',#136244,1.); +#136244 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#136245 = ORIENTED_EDGE('',*,*,#136246,.T.); +#136246 = EDGE_CURVE('',#136239,#136247,#136249,.T.); +#136247 = VERTEX_POINT('',#136248); +#136248 = CARTESIAN_POINT('',(164.444282,-124.025982,1.585)); +#136249 = CIRCLE('',#136250,7.500016685594E-02); +#136250 = AXIS2_PLACEMENT_3D('',#136251,#136252,#136253); +#136251 = CARTESIAN_POINT('',(164.3772000864,-124.0595236442,1.585)); +#136252 = DIRECTION('',(0.,0.,-1.)); +#136253 = DIRECTION('',(-0.964492339665,-0.264110822816,-0.)); +#136254 = ORIENTED_EDGE('',*,*,#136255,.T.); +#136255 = EDGE_CURVE('',#136247,#136128,#136256,.T.); +#136256 = LINE('',#136257,#136258); +#136257 = CARTESIAN_POINT('',(164.444282,-124.025982,1.585)); +#136258 = VECTOR('',#136259,1.); +#136259 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#136260 = PLANE('',#136261); +#136261 = AXIS2_PLACEMENT_3D('',#136262,#136263,#136264); +#136262 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136263 = DIRECTION('',(0.,0.,1.)); +#136264 = DIRECTION('',(1.,0.,-0.)); +#136265 = SHELL_BASED_SURFACE_MODEL('',(#136266)); +#136266 = OPEN_SHELL('',(#136267)); +#136267 = ADVANCED_FACE('',(#136268),#136337,.T.); +#136268 = FACE_BOUND('',#136269,.F.); +#136269 = EDGE_LOOP('',(#136270,#136281,#136289,#136297,#136306,#136314, + #136323,#136331)); +#136270 = ORIENTED_EDGE('',*,*,#136271,.T.); +#136271 = EDGE_CURVE('',#136272,#136274,#136276,.T.); +#136272 = VERTEX_POINT('',#136273); +#136273 = CARTESIAN_POINT('',(207.386217,-122.900139,1.585)); +#136274 = VERTEX_POINT('',#136275); +#136275 = CARTESIAN_POINT('',(207.50165,-122.9231,1.585)); +#136276 = CIRCLE('',#136277,6.000007318649E-02); +#136277 = AXIS2_PLACEMENT_3D('',#136278,#136279,#136280); +#136278 = CARTESIAN_POINT('',(207.44164992681,-122.9230998233,1.585)); +#136279 = DIRECTION('',(0.,0.,-1.)); +#136280 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#136281 = ORIENTED_EDGE('',*,*,#136282,.T.); +#136282 = EDGE_CURVE('',#136274,#136283,#136285,.T.); +#136283 = VERTEX_POINT('',#136284); +#136284 = CARTESIAN_POINT('',(207.50165,-124.1131,1.585)); +#136285 = LINE('',#136286,#136287); +#136286 = CARTESIAN_POINT('',(207.50165,-122.9231,1.585)); +#136287 = VECTOR('',#136288,1.); +#136288 = DIRECTION('',(0.,-1.,0.)); +#136289 = ORIENTED_EDGE('',*,*,#136290,.T.); +#136290 = EDGE_CURVE('',#136283,#136291,#136293,.T.); +#136291 = VERTEX_POINT('',#136292); +#136292 = CARTESIAN_POINT('',(208.69165,-124.1131,1.585)); +#136293 = LINE('',#136294,#136295); +#136294 = CARTESIAN_POINT('',(207.50165,-124.1131,1.585)); +#136295 = VECTOR('',#136296,1.); +#136296 = DIRECTION('',(1.,0.,0.)); +#136297 = ORIENTED_EDGE('',*,*,#136298,.T.); +#136298 = EDGE_CURVE('',#136291,#136299,#136301,.T.); +#136299 = VERTEX_POINT('',#136300); +#136300 = CARTESIAN_POINT('',(208.69165,-124.2331,1.585)); +#136301 = CIRCLE('',#136302,6.000000000042E-02); +#136302 = AXIS2_PLACEMENT_3D('',#136303,#136304,#136305); +#136303 = CARTESIAN_POINT('',(208.69165022558,-124.1731,1.585)); +#136304 = DIRECTION('',(0.,0.,-1.)); +#136305 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#136306 = ORIENTED_EDGE('',*,*,#136307,.T.); +#136307 = EDGE_CURVE('',#136299,#136308,#136310,.T.); +#136308 = VERTEX_POINT('',#136309); +#136309 = CARTESIAN_POINT('',(207.44165,-124.2331,1.585)); +#136310 = LINE('',#136311,#136312); +#136311 = CARTESIAN_POINT('',(208.69165,-124.2331,1.585)); +#136312 = VECTOR('',#136313,1.); +#136313 = DIRECTION('',(-1.,0.,0.)); +#136314 = ORIENTED_EDGE('',*,*,#136315,.T.); +#136315 = EDGE_CURVE('',#136308,#136316,#136318,.T.); +#136316 = VERTEX_POINT('',#136317); +#136317 = CARTESIAN_POINT('',(207.38165,-124.1731,1.585)); +#136318 = CIRCLE('',#136319,5.999932016257E-02); +#136319 = AXIS2_PLACEMENT_3D('',#136320,#136321,#136322); +#136320 = CARTESIAN_POINT('',(207.44164932015,-124.1731006798,1.585)); +#136321 = DIRECTION('',(0.,0.,-1.)); +#136322 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#136323 = ORIENTED_EDGE('',*,*,#136324,.T.); +#136324 = EDGE_CURVE('',#136316,#136325,#136327,.T.); +#136325 = VERTEX_POINT('',#136326); +#136326 = CARTESIAN_POINT('',(207.38165,-122.9231,1.585)); +#136327 = LINE('',#136328,#136329); +#136328 = CARTESIAN_POINT('',(207.38165,-124.1731,1.585)); +#136329 = VECTOR('',#136330,1.); +#136330 = DIRECTION('',(0.,1.,0.)); +#136331 = ORIENTED_EDGE('',*,*,#136332,.T.); +#136332 = EDGE_CURVE('',#136325,#136272,#136333,.T.); +#136333 = LINE('',#136334,#136335); +#136334 = CARTESIAN_POINT('',(207.38165,-122.9231,1.585)); +#136335 = VECTOR('',#136336,1.); +#136336 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#136337 = PLANE('',#136338); +#136338 = AXIS2_PLACEMENT_3D('',#136339,#136340,#136341); +#136339 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136340 = DIRECTION('',(0.,0.,1.)); +#136341 = DIRECTION('',(1.,0.,-0.)); +#136342 = SHELL_BASED_SURFACE_MODEL('',(#136343)); +#136343 = OPEN_SHELL('',(#136344)); +#136344 = ADVANCED_FACE('',(#136345),#136422,.T.); +#136345 = FACE_BOUND('',#136346,.F.); +#136346 = EDGE_LOOP('',(#136347,#136358,#136366,#136374,#136383,#136391, + #136400,#136408,#136416)); +#136347 = ORIENTED_EDGE('',*,*,#136348,.T.); +#136348 = EDGE_CURVE('',#136349,#136351,#136353,.T.); +#136349 = VERTEX_POINT('',#136350); +#136350 = CARTESIAN_POINT('',(167.007125,-122.915559,1.585)); +#136351 = VERTEX_POINT('',#136352); +#136352 = CARTESIAN_POINT('',(167.123793,-122.977919,1.585)); +#136353 = CIRCLE('',#136354,7.500000000004E-02); +#136354 = AXIS2_PLACEMENT_3D('',#136355,#136356,#136357); +#136355 = CARTESIAN_POINT('',(167.048793,-122.9779190655,1.585)); +#136356 = DIRECTION('',(0.,0.,-1.)); +#136357 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#136358 = ORIENTED_EDGE('',*,*,#136359,.T.); +#136359 = EDGE_CURVE('',#136351,#136360,#136362,.T.); +#136360 = VERTEX_POINT('',#136361); +#136361 = CARTESIAN_POINT('',(167.123793,-123.902919,1.585)); +#136362 = LINE('',#136363,#136364); +#136363 = CARTESIAN_POINT('',(167.123793,-122.977919,1.585)); +#136364 = VECTOR('',#136365,1.); +#136365 = DIRECTION('',(0.,-1.,0.)); +#136366 = ORIENTED_EDGE('',*,*,#136367,.T.); +#136367 = EDGE_CURVE('',#136360,#136368,#136370,.T.); +#136368 = VERTEX_POINT('',#136369); +#136369 = CARTESIAN_POINT('',(167.539615,-123.90436,1.585)); +#136370 = LINE('',#136371,#136372); +#136371 = CARTESIAN_POINT('',(167.123793,-123.902919,1.585)); +#136372 = VECTOR('',#136373,1.); +#136373 = DIRECTION('',(0.999993995468,-3.465404301528E-03,0.)); +#136374 = ORIENTED_EDGE('',*,*,#136375,.T.); +#136375 = EDGE_CURVE('',#136368,#136376,#136378,.T.); +#136376 = VERTEX_POINT('',#136377); +#136377 = CARTESIAN_POINT('',(167.524983,-124.052919,1.585)); +#136378 = CIRCLE('',#136379,7.500006711465E-02); +#136379 = AXIS2_PLACEMENT_3D('',#136380,#136381,#136382); +#136380 = CARTESIAN_POINT('',(167.52498306711,-123.9779189328,1.585)); +#136381 = DIRECTION('',(0.,0.,-1.)); +#136382 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#136383 = ORIENTED_EDGE('',*,*,#136384,.T.); +#136384 = EDGE_CURVE('',#136376,#136385,#136387,.T.); +#136385 = VERTEX_POINT('',#136386); +#136386 = CARTESIAN_POINT('',(167.034161,-124.051478,1.585)); +#136387 = LINE('',#136388,#136389); +#136388 = CARTESIAN_POINT('',(167.524983,-124.052919,1.585)); +#136389 = VECTOR('',#136390,1.); +#136390 = DIRECTION('',(-0.999995690299,2.935878566407E-03,0.)); +#136391 = ORIENTED_EDGE('',*,*,#136392,.T.); +#136392 = EDGE_CURVE('',#136385,#136393,#136395,.T.); +#136393 = VERTEX_POINT('',#136394); +#136394 = CARTESIAN_POINT('',(166.973793,-123.977919,1.585)); +#136395 = CIRCLE('',#136396,7.500074938989E-02); +#136396 = AXIS2_PLACEMENT_3D('',#136397,#136398,#136399); +#136397 = CARTESIAN_POINT('',(167.04879374938,-123.9779185338,1.585)); +#136398 = DIRECTION('',(0.,0.,-1.)); +#136399 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#136400 = ORIENTED_EDGE('',*,*,#136401,.T.); +#136401 = EDGE_CURVE('',#136393,#136402,#136404,.T.); +#136402 = VERTEX_POINT('',#136403); +#136403 = CARTESIAN_POINT('',(166.975234,-122.963287,1.585)); +#136404 = LINE('',#136405,#136406); +#136405 = CARTESIAN_POINT('',(166.973793,-123.977919,1.585)); +#136406 = VECTOR('',#136407,1.); +#136407 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#136408 = ORIENTED_EDGE('',*,*,#136409,.T.); +#136409 = EDGE_CURVE('',#136402,#136410,#136412,.T.); +#136410 = VERTEX_POINT('',#136411); +#136411 = CARTESIAN_POINT('',(166.986433,-122.936251,1.585)); +#136412 = LINE('',#136413,#136414); +#136413 = CARTESIAN_POINT('',(166.975234,-122.963287,1.585)); +#136414 = VECTOR('',#136415,1.); +#136415 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#136416 = ORIENTED_EDGE('',*,*,#136417,.T.); +#136417 = EDGE_CURVE('',#136410,#136349,#136418,.T.); +#136418 = LINE('',#136419,#136420); +#136419 = CARTESIAN_POINT('',(166.986433,-122.936251,1.585)); +#136420 = VECTOR('',#136421,1.); +#136421 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#136422 = PLANE('',#136423); +#136423 = AXIS2_PLACEMENT_3D('',#136424,#136425,#136426); +#136424 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136425 = DIRECTION('',(0.,0.,1.)); +#136426 = DIRECTION('',(1.,0.,-0.)); +#136427 = SHELL_BASED_SURFACE_MODEL('',(#136428)); +#136428 = OPEN_SHELL('',(#136429)); +#136429 = ADVANCED_FACE('',(#136430),#136491,.T.); +#136430 = FACE_BOUND('',#136431,.F.); +#136431 = EDGE_LOOP('',(#136432,#136443,#136451,#136460,#136468,#136477, + #136485)); +#136432 = ORIENTED_EDGE('',*,*,#136433,.T.); +#136433 = EDGE_CURVE('',#136434,#136436,#136438,.T.); +#136434 = VERTEX_POINT('',#136435); +#136435 = CARTESIAN_POINT('',(167.748447,-123.051478,1.585)); +#136436 = VERTEX_POINT('',#136437); +#136437 = CARTESIAN_POINT('',(167.763079,-122.902919,1.585)); +#136438 = CIRCLE('',#136439,7.500006711464E-02); +#136439 = AXIS2_PLACEMENT_3D('',#136440,#136441,#136442); +#136440 = CARTESIAN_POINT('',(167.76307893288,-122.9779190671,1.585)); +#136441 = DIRECTION('',(0.,0.,-1.)); +#136442 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#136443 = ORIENTED_EDGE('',*,*,#136444,.T.); +#136444 = EDGE_CURVE('',#136436,#136445,#136447,.T.); +#136445 = VERTEX_POINT('',#136446); +#136446 = CARTESIAN_POINT('',(168.444377,-122.90436,1.585)); +#136447 = LINE('',#136448,#136449); +#136448 = CARTESIAN_POINT('',(167.763079,-122.902919,1.585)); +#136449 = VECTOR('',#136450,1.); +#136450 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#136451 = ORIENTED_EDGE('',*,*,#136452,.T.); +#136452 = EDGE_CURVE('',#136445,#136453,#136455,.T.); +#136453 = VERTEX_POINT('',#136454); +#136454 = CARTESIAN_POINT('',(168.498681,-123.007463,1.585)); +#136455 = CIRCLE('',#136456,7.500015546837E-02); +#136456 = AXIS2_PLACEMENT_3D('',#136457,#136458,#136459); +#136457 = CARTESIAN_POINT('',(168.42974497422,-122.9779190044,1.585)); +#136458 = DIRECTION('',(0.,0.,-1.)); +#136459 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#136460 = ORIENTED_EDGE('',*,*,#136461,.T.); +#136461 = EDGE_CURVE('',#136453,#136462,#136464,.T.); +#136462 = VERTEX_POINT('',#136463); +#136463 = CARTESIAN_POINT('',(168.063022,-124.020344,1.585)); +#136464 = LINE('',#136465,#136466); +#136465 = CARTESIAN_POINT('',(168.498681,-123.007463,1.585)); +#136466 = VECTOR('',#136467,1.); +#136467 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#136468 = ORIENTED_EDGE('',*,*,#136469,.T.); +#136469 = EDGE_CURVE('',#136462,#136470,#136472,.T.); +#136470 = VERTEX_POINT('',#136471); +#136471 = CARTESIAN_POINT('',(167.932238,-123.948375,1.585)); +#136472 = CIRCLE('',#136473,7.50003017842E-02); +#136473 = AXIS2_PLACEMENT_3D('',#136474,#136475,#136476); +#136474 = CARTESIAN_POINT('',(168.00117434698,-123.9779186174,1.585)); +#136475 = DIRECTION('',(-0.,0.,-1.)); +#136476 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#136477 = ORIENTED_EDGE('',*,*,#136478,.T.); +#136478 = EDGE_CURVE('',#136470,#136479,#136481,.T.); +#136479 = VERTEX_POINT('',#136480); +#136480 = CARTESIAN_POINT('',(168.316004,-123.052919,1.585)); +#136481 = LINE('',#136482,#136483); +#136482 = CARTESIAN_POINT('',(167.932238,-123.948375,1.585)); +#136483 = VECTOR('',#136484,1.); +#136484 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#136485 = ORIENTED_EDGE('',*,*,#136486,.T.); +#136486 = EDGE_CURVE('',#136479,#136434,#136487,.T.); +#136487 = LINE('',#136488,#136489); +#136488 = CARTESIAN_POINT('',(168.316004,-123.052919,1.585)); +#136489 = VECTOR('',#136490,1.); +#136490 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#136491 = PLANE('',#136492); +#136492 = AXIS2_PLACEMENT_3D('',#136493,#136494,#136495); +#136493 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136494 = DIRECTION('',(0.,0.,1.)); +#136495 = DIRECTION('',(1.,0.,-0.)); +#136496 = SHELL_BASED_SURFACE_MODEL('',(#136497)); +#136497 = OPEN_SHELL('',(#136498)); +#136498 = ADVANCED_FACE('',(#136499,#136569,#136753,#136837,#136871, + #136905),#136939,.T.); +#136499 = FACE_BOUND('',#136500,.F.); +#136500 = EDGE_LOOP('',(#136501,#136512,#136520,#136529,#136537,#136546, + #136554,#136563)); +#136501 = ORIENTED_EDGE('',*,*,#136502,.T.); +#136502 = EDGE_CURVE('',#136503,#136505,#136507,.T.); +#136503 = VERTEX_POINT('',#136504); +#136504 = CARTESIAN_POINT('',(207.67165,-116.2631,1.585)); +#136505 = VERTEX_POINT('',#136506); +#136506 = CARTESIAN_POINT('',(207.73165,-116.2031,1.585)); +#136507 = CIRCLE('',#136508,5.999932016262E-02); +#136508 = AXIS2_PLACEMENT_3D('',#136509,#136510,#136511); +#136509 = CARTESIAN_POINT('',(207.73164932015,-116.2630993201,1.585)); +#136510 = DIRECTION('',(0.,0.,-1.)); +#136511 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#136512 = ORIENTED_EDGE('',*,*,#136513,.T.); +#136513 = EDGE_CURVE('',#136505,#136514,#136516,.T.); +#136514 = VERTEX_POINT('',#136515); +#136515 = CARTESIAN_POINT('',(213.70165,-116.2031,1.585)); +#136516 = LINE('',#136517,#136518); +#136517 = CARTESIAN_POINT('',(207.73165,-116.2031,1.585)); +#136518 = VECTOR('',#136519,1.); +#136519 = DIRECTION('',(1.,0.,0.)); +#136520 = ORIENTED_EDGE('',*,*,#136521,.T.); +#136521 = EDGE_CURVE('',#136514,#136522,#136524,.T.); +#136522 = VERTEX_POINT('',#136523); +#136523 = CARTESIAN_POINT('',(213.76165,-116.2631,1.585)); +#136524 = CIRCLE('',#136525,5.999932016257E-02); +#136525 = AXIS2_PLACEMENT_3D('',#136526,#136527,#136528); +#136526 = CARTESIAN_POINT('',(213.70165067984,-116.2630993201,1.585)); +#136527 = DIRECTION('',(0.,0.,-1.)); +#136528 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#136529 = ORIENTED_EDGE('',*,*,#136530,.T.); +#136530 = EDGE_CURVE('',#136522,#136531,#136533,.T.); +#136531 = VERTEX_POINT('',#136532); +#136532 = CARTESIAN_POINT('',(213.76165,-123.8831,1.585)); +#136533 = LINE('',#136534,#136535); +#136534 = CARTESIAN_POINT('',(213.76165,-116.2631,1.585)); +#136535 = VECTOR('',#136536,1.); +#136536 = DIRECTION('',(0.,-1.,0.)); +#136537 = ORIENTED_EDGE('',*,*,#136538,.T.); +#136538 = EDGE_CURVE('',#136531,#136539,#136541,.T.); +#136539 = VERTEX_POINT('',#136540); +#136540 = CARTESIAN_POINT('',(213.70165,-123.9431,1.585)); +#136541 = CIRCLE('',#136542,5.999932016265E-02); +#136542 = AXIS2_PLACEMENT_3D('',#136543,#136544,#136545); +#136543 = CARTESIAN_POINT('',(213.70165067984,-123.8831006798,1.585)); +#136544 = DIRECTION('',(0.,0.,-1.)); +#136545 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#136546 = ORIENTED_EDGE('',*,*,#136547,.T.); +#136547 = EDGE_CURVE('',#136539,#136548,#136550,.T.); +#136548 = VERTEX_POINT('',#136549); +#136549 = CARTESIAN_POINT('',(207.73165,-123.9431,1.585)); +#136550 = LINE('',#136551,#136552); +#136551 = CARTESIAN_POINT('',(213.70165,-123.9431,1.585)); +#136552 = VECTOR('',#136553,1.); +#136553 = DIRECTION('',(-1.,0.,0.)); +#136554 = ORIENTED_EDGE('',*,*,#136555,.T.); +#136555 = EDGE_CURVE('',#136548,#136556,#136558,.T.); +#136556 = VERTEX_POINT('',#136557); +#136557 = CARTESIAN_POINT('',(207.67165,-123.8831,1.585)); +#136558 = CIRCLE('',#136559,5.999932016256E-02); +#136559 = AXIS2_PLACEMENT_3D('',#136560,#136561,#136562); +#136560 = CARTESIAN_POINT('',(207.73164932015,-123.8831006798,1.585)); +#136561 = DIRECTION('',(0.,0.,-1.)); +#136562 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#136563 = ORIENTED_EDGE('',*,*,#136564,.T.); +#136564 = EDGE_CURVE('',#136556,#136503,#136565,.T.); +#136565 = LINE('',#136566,#136567); +#136566 = CARTESIAN_POINT('',(207.67165,-123.8831,1.585)); +#136567 = VECTOR('',#136568,1.); +#136568 = DIRECTION('',(0.,1.,0.)); +#136569 = FACE_BOUND('',#136570,.F.); +#136570 = EDGE_LOOP('',(#136571,#136582,#136590,#136598,#136606,#136615, + #136623,#136631,#136639,#136648,#136656,#136665,#136673,#136681, + #136689,#136698,#136706,#136714,#136722,#136731,#136739,#136747)); +#136571 = ORIENTED_EDGE('',*,*,#136572,.T.); +#136572 = EDGE_CURVE('',#136573,#136575,#136577,.T.); +#136573 = VERTEX_POINT('',#136574); +#136574 = CARTESIAN_POINT('',(209.99165,-117.0831,1.585)); +#136575 = VERTEX_POINT('',#136576); +#136576 = CARTESIAN_POINT('',(209.93165,-117.0231,1.585)); +#136577 = CIRCLE('',#136578,5.999932016264E-02); +#136578 = AXIS2_PLACEMENT_3D('',#136579,#136580,#136581); +#136579 = CARTESIAN_POINT('',(209.99164932015,-117.0231006798,1.585)); +#136580 = DIRECTION('',(0.,0.,-1.)); +#136581 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#136582 = ORIENTED_EDGE('',*,*,#136583,.T.); +#136583 = EDGE_CURVE('',#136575,#136584,#136586,.T.); +#136584 = VERTEX_POINT('',#136585); +#136585 = CARTESIAN_POINT('',(209.93165,-116.3231,1.585)); +#136586 = LINE('',#136587,#136588); +#136587 = CARTESIAN_POINT('',(209.93165,-117.0231,1.585)); +#136588 = VECTOR('',#136589,1.); +#136589 = DIRECTION('',(0.,1.,0.)); +#136590 = ORIENTED_EDGE('',*,*,#136591,.T.); +#136591 = EDGE_CURVE('',#136584,#136592,#136594,.T.); +#136592 = VERTEX_POINT('',#136593); +#136593 = CARTESIAN_POINT('',(208.55165,-116.3231,1.585)); +#136594 = LINE('',#136595,#136596); +#136595 = CARTESIAN_POINT('',(209.93165,-116.3231,1.585)); +#136596 = VECTOR('',#136597,1.); +#136597 = DIRECTION('',(-1.,0.,0.)); +#136598 = ORIENTED_EDGE('',*,*,#136599,.T.); +#136599 = EDGE_CURVE('',#136592,#136600,#136602,.T.); +#136600 = VERTEX_POINT('',#136601); +#136601 = CARTESIAN_POINT('',(208.55165,-118.0731,1.585)); +#136602 = LINE('',#136603,#136604); +#136603 = CARTESIAN_POINT('',(208.55165,-116.3231,1.585)); +#136604 = VECTOR('',#136605,1.); +#136605 = DIRECTION('',(0.,-1.,0.)); +#136606 = ORIENTED_EDGE('',*,*,#136607,.T.); +#136607 = EDGE_CURVE('',#136600,#136608,#136610,.T.); +#136608 = VERTEX_POINT('',#136609); +#136609 = CARTESIAN_POINT('',(208.49165,-118.1331,1.585)); +#136610 = CIRCLE('',#136611,5.999932016262E-02); +#136611 = AXIS2_PLACEMENT_3D('',#136612,#136613,#136614); +#136612 = CARTESIAN_POINT('',(208.49165067984,-118.0731006798,1.585)); +#136613 = DIRECTION('',(0.,0.,-1.)); +#136614 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#136615 = ORIENTED_EDGE('',*,*,#136616,.T.); +#136616 = EDGE_CURVE('',#136608,#136617,#136619,.T.); +#136617 = VERTEX_POINT('',#136618); +#136618 = CARTESIAN_POINT('',(207.79165,-118.1331,1.585)); +#136619 = LINE('',#136620,#136621); +#136620 = CARTESIAN_POINT('',(208.49165,-118.1331,1.585)); +#136621 = VECTOR('',#136622,1.); +#136622 = DIRECTION('',(-1.,0.,0.)); +#136623 = ORIENTED_EDGE('',*,*,#136624,.T.); +#136624 = EDGE_CURVE('',#136617,#136625,#136627,.T.); +#136625 = VERTEX_POINT('',#136626); +#136626 = CARTESIAN_POINT('',(207.79165,-119.5131,1.585)); +#136627 = LINE('',#136628,#136629); +#136628 = CARTESIAN_POINT('',(207.79165,-118.1331,1.585)); +#136629 = VECTOR('',#136630,1.); +#136630 = DIRECTION('',(0.,-1.,0.)); +#136631 = ORIENTED_EDGE('',*,*,#136632,.T.); +#136632 = EDGE_CURVE('',#136625,#136633,#136635,.T.); +#136633 = VERTEX_POINT('',#136634); +#136634 = CARTESIAN_POINT('',(208.49165,-119.5131,1.585)); +#136635 = LINE('',#136636,#136637); +#136636 = CARTESIAN_POINT('',(207.79165,-119.5131,1.585)); +#136637 = VECTOR('',#136638,1.); +#136638 = DIRECTION('',(1.,0.,0.)); +#136639 = ORIENTED_EDGE('',*,*,#136640,.T.); +#136640 = EDGE_CURVE('',#136633,#136641,#136643,.T.); +#136641 = VERTEX_POINT('',#136642); +#136642 = CARTESIAN_POINT('',(208.55165,-119.5731,1.585)); +#136643 = CIRCLE('',#136644,5.999932016262E-02); +#136644 = AXIS2_PLACEMENT_3D('',#136645,#136646,#136647); +#136645 = CARTESIAN_POINT('',(208.49165067984,-119.5730993201,1.585)); +#136646 = DIRECTION('',(0.,0.,-1.)); +#136647 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#136648 = ORIENTED_EDGE('',*,*,#136649,.T.); +#136649 = EDGE_CURVE('',#136641,#136650,#136652,.T.); +#136650 = VERTEX_POINT('',#136651); +#136651 = CARTESIAN_POINT('',(208.55165,-120.5731,1.585)); +#136652 = LINE('',#136653,#136654); +#136653 = CARTESIAN_POINT('',(208.55165,-119.5731,1.585)); +#136654 = VECTOR('',#136655,1.); +#136655 = DIRECTION('',(0.,-1.,0.)); +#136656 = ORIENTED_EDGE('',*,*,#136657,.T.); +#136657 = EDGE_CURVE('',#136650,#136658,#136660,.T.); +#136658 = VERTEX_POINT('',#136659); +#136659 = CARTESIAN_POINT('',(208.49165,-120.6331,1.585)); +#136660 = CIRCLE('',#136661,5.999932016262E-02); +#136661 = AXIS2_PLACEMENT_3D('',#136662,#136663,#136664); +#136662 = CARTESIAN_POINT('',(208.49165067984,-120.5731006798,1.585)); +#136663 = DIRECTION('',(0.,0.,-1.)); +#136664 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#136665 = ORIENTED_EDGE('',*,*,#136666,.T.); +#136666 = EDGE_CURVE('',#136658,#136667,#136669,.T.); +#136667 = VERTEX_POINT('',#136668); +#136668 = CARTESIAN_POINT('',(207.79165,-120.6331,1.585)); +#136669 = LINE('',#136670,#136671); +#136670 = CARTESIAN_POINT('',(208.49165,-120.6331,1.585)); +#136671 = VECTOR('',#136672,1.); +#136672 = DIRECTION('',(-1.,0.,0.)); +#136673 = ORIENTED_EDGE('',*,*,#136674,.T.); +#136674 = EDGE_CURVE('',#136667,#136675,#136677,.T.); +#136675 = VERTEX_POINT('',#136676); +#136676 = CARTESIAN_POINT('',(207.79165,-122.0131,1.585)); +#136677 = LINE('',#136678,#136679); +#136678 = CARTESIAN_POINT('',(207.79165,-120.6331,1.585)); +#136679 = VECTOR('',#136680,1.); +#136680 = DIRECTION('',(0.,-1.,0.)); +#136681 = ORIENTED_EDGE('',*,*,#136682,.T.); +#136682 = EDGE_CURVE('',#136675,#136683,#136685,.T.); +#136683 = VERTEX_POINT('',#136684); +#136684 = CARTESIAN_POINT('',(208.49165,-122.0131,1.585)); +#136685 = LINE('',#136686,#136687); +#136686 = CARTESIAN_POINT('',(207.79165,-122.0131,1.585)); +#136687 = VECTOR('',#136688,1.); +#136688 = DIRECTION('',(1.,0.,0.)); +#136689 = ORIENTED_EDGE('',*,*,#136690,.T.); +#136690 = EDGE_CURVE('',#136683,#136691,#136693,.T.); +#136691 = VERTEX_POINT('',#136692); +#136692 = CARTESIAN_POINT('',(208.55165,-122.0731,1.585)); +#136693 = CIRCLE('',#136694,5.999932016262E-02); +#136694 = AXIS2_PLACEMENT_3D('',#136695,#136696,#136697); +#136695 = CARTESIAN_POINT('',(208.49165067984,-122.0730993201,1.585)); +#136696 = DIRECTION('',(0.,0.,-1.)); +#136697 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#136698 = ORIENTED_EDGE('',*,*,#136699,.T.); +#136699 = EDGE_CURVE('',#136691,#136700,#136702,.T.); +#136700 = VERTEX_POINT('',#136701); +#136701 = CARTESIAN_POINT('',(208.55165,-123.8231,1.585)); +#136702 = LINE('',#136703,#136704); +#136703 = CARTESIAN_POINT('',(208.55165,-122.0731,1.585)); +#136704 = VECTOR('',#136705,1.); +#136705 = DIRECTION('',(0.,-1.,0.)); +#136706 = ORIENTED_EDGE('',*,*,#136707,.T.); +#136707 = EDGE_CURVE('',#136700,#136708,#136710,.T.); +#136708 = VERTEX_POINT('',#136709); +#136709 = CARTESIAN_POINT('',(209.93165,-123.8231,1.585)); +#136710 = LINE('',#136711,#136712); +#136711 = CARTESIAN_POINT('',(208.55165,-123.8231,1.585)); +#136712 = VECTOR('',#136713,1.); +#136713 = DIRECTION('',(1.,0.,0.)); +#136714 = ORIENTED_EDGE('',*,*,#136715,.T.); +#136715 = EDGE_CURVE('',#136708,#136716,#136718,.T.); +#136716 = VERTEX_POINT('',#136717); +#136717 = CARTESIAN_POINT('',(209.93165,-123.1231,1.585)); +#136718 = LINE('',#136719,#136720); +#136719 = CARTESIAN_POINT('',(209.93165,-123.8231,1.585)); +#136720 = VECTOR('',#136721,1.); +#136721 = DIRECTION('',(0.,1.,0.)); +#136722 = ORIENTED_EDGE('',*,*,#136723,.T.); +#136723 = EDGE_CURVE('',#136716,#136724,#136726,.T.); +#136724 = VERTEX_POINT('',#136725); +#136725 = CARTESIAN_POINT('',(209.99165,-123.0631,1.585)); +#136726 = CIRCLE('',#136727,5.999932016261E-02); +#136727 = AXIS2_PLACEMENT_3D('',#136728,#136729,#136730); +#136728 = CARTESIAN_POINT('',(209.99164932015,-123.1230993201,1.585)); +#136729 = DIRECTION('',(0.,0.,-1.)); +#136730 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#136731 = ORIENTED_EDGE('',*,*,#136732,.T.); +#136732 = EDGE_CURVE('',#136724,#136733,#136735,.T.); +#136733 = VERTEX_POINT('',#136734); +#136734 = CARTESIAN_POINT('',(212.88165,-123.0631,1.585)); +#136735 = LINE('',#136736,#136737); +#136736 = CARTESIAN_POINT('',(209.99165,-123.0631,1.585)); +#136737 = VECTOR('',#136738,1.); +#136738 = DIRECTION('',(1.,0.,0.)); +#136739 = ORIENTED_EDGE('',*,*,#136740,.T.); +#136740 = EDGE_CURVE('',#136733,#136741,#136743,.T.); +#136741 = VERTEX_POINT('',#136742); +#136742 = CARTESIAN_POINT('',(212.88165,-117.0831,1.585)); +#136743 = LINE('',#136744,#136745); +#136744 = CARTESIAN_POINT('',(212.88165,-123.0631,1.585)); +#136745 = VECTOR('',#136746,1.); +#136746 = DIRECTION('',(0.,1.,0.)); +#136747 = ORIENTED_EDGE('',*,*,#136748,.T.); +#136748 = EDGE_CURVE('',#136741,#136573,#136749,.T.); +#136749 = LINE('',#136750,#136751); +#136750 = CARTESIAN_POINT('',(212.88165,-117.0831,1.585)); +#136751 = VECTOR('',#136752,1.); +#136752 = DIRECTION('',(-1.,0.,0.)); +#136753 = FACE_BOUND('',#136754,.F.); +#136754 = EDGE_LOOP('',(#136755,#136765,#136773,#136781,#136789,#136798, + #136806,#136815,#136823,#136831)); +#136755 = ORIENTED_EDGE('',*,*,#136756,.T.); +#136756 = EDGE_CURVE('',#136757,#136759,#136761,.T.); +#136757 = VERTEX_POINT('',#136758); +#136758 = CARTESIAN_POINT('',(213.64165,-123.8231,1.585)); +#136759 = VERTEX_POINT('',#136760); +#136760 = CARTESIAN_POINT('',(213.64165,-116.3231,1.585)); +#136761 = LINE('',#136762,#136763); +#136762 = CARTESIAN_POINT('',(213.64165,-123.8231,1.585)); +#136763 = VECTOR('',#136764,1.); +#136764 = DIRECTION('',(0.,1.,0.)); +#136765 = ORIENTED_EDGE('',*,*,#136766,.T.); +#136766 = EDGE_CURVE('',#136759,#136767,#136769,.T.); +#136767 = VERTEX_POINT('',#136768); +#136768 = CARTESIAN_POINT('',(210.05165,-116.3231,1.585)); +#136769 = LINE('',#136770,#136771); +#136770 = CARTESIAN_POINT('',(213.64165,-116.3231,1.585)); +#136771 = VECTOR('',#136772,1.); +#136772 = DIRECTION('',(-1.,0.,0.)); +#136773 = ORIENTED_EDGE('',*,*,#136774,.T.); +#136774 = EDGE_CURVE('',#136767,#136775,#136777,.T.); +#136775 = VERTEX_POINT('',#136776); +#136776 = CARTESIAN_POINT('',(210.05165,-116.9631,1.585)); +#136777 = LINE('',#136778,#136779); +#136778 = CARTESIAN_POINT('',(210.05165,-116.3231,1.585)); +#136779 = VECTOR('',#136780,1.); +#136780 = DIRECTION('',(0.,-1.,0.)); +#136781 = ORIENTED_EDGE('',*,*,#136782,.T.); +#136782 = EDGE_CURVE('',#136775,#136783,#136785,.T.); +#136783 = VERTEX_POINT('',#136784); +#136784 = CARTESIAN_POINT('',(212.94165,-116.9631,1.585)); +#136785 = LINE('',#136786,#136787); +#136786 = CARTESIAN_POINT('',(210.05165,-116.9631,1.585)); +#136787 = VECTOR('',#136788,1.); +#136788 = DIRECTION('',(1.,0.,0.)); +#136789 = ORIENTED_EDGE('',*,*,#136790,.T.); +#136790 = EDGE_CURVE('',#136783,#136791,#136793,.T.); +#136791 = VERTEX_POINT('',#136792); +#136792 = CARTESIAN_POINT('',(213.00165,-117.0231,1.585)); +#136793 = CIRCLE('',#136794,5.999932016268E-02); +#136794 = AXIS2_PLACEMENT_3D('',#136795,#136796,#136797); +#136795 = CARTESIAN_POINT('',(212.94165067984,-117.0230993201,1.585)); +#136796 = DIRECTION('',(0.,0.,-1.)); +#136797 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#136798 = ORIENTED_EDGE('',*,*,#136799,.T.); +#136799 = EDGE_CURVE('',#136791,#136800,#136802,.T.); +#136800 = VERTEX_POINT('',#136801); +#136801 = CARTESIAN_POINT('',(213.00165,-123.1231,1.585)); +#136802 = LINE('',#136803,#136804); +#136803 = CARTESIAN_POINT('',(213.00165,-117.0231,1.585)); +#136804 = VECTOR('',#136805,1.); +#136805 = DIRECTION('',(0.,-1.,0.)); +#136806 = ORIENTED_EDGE('',*,*,#136807,.T.); +#136807 = EDGE_CURVE('',#136800,#136808,#136810,.T.); +#136808 = VERTEX_POINT('',#136809); +#136809 = CARTESIAN_POINT('',(212.94165,-123.1831,1.585)); +#136810 = CIRCLE('',#136811,5.999932016262E-02); +#136811 = AXIS2_PLACEMENT_3D('',#136812,#136813,#136814); +#136812 = CARTESIAN_POINT('',(212.94165067984,-123.1231006798,1.585)); +#136813 = DIRECTION('',(0.,0.,-1.)); +#136814 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#136815 = ORIENTED_EDGE('',*,*,#136816,.T.); +#136816 = EDGE_CURVE('',#136808,#136817,#136819,.T.); +#136817 = VERTEX_POINT('',#136818); +#136818 = CARTESIAN_POINT('',(210.05165,-123.1831,1.585)); +#136819 = LINE('',#136820,#136821); +#136820 = CARTESIAN_POINT('',(212.94165,-123.1831,1.585)); +#136821 = VECTOR('',#136822,1.); +#136822 = DIRECTION('',(-1.,0.,0.)); +#136823 = ORIENTED_EDGE('',*,*,#136824,.T.); +#136824 = EDGE_CURVE('',#136817,#136825,#136827,.T.); +#136825 = VERTEX_POINT('',#136826); +#136826 = CARTESIAN_POINT('',(210.05165,-123.8231,1.585)); +#136827 = LINE('',#136828,#136829); +#136828 = CARTESIAN_POINT('',(210.05165,-123.1831,1.585)); +#136829 = VECTOR('',#136830,1.); +#136830 = DIRECTION('',(0.,-1.,0.)); +#136831 = ORIENTED_EDGE('',*,*,#136832,.T.); +#136832 = EDGE_CURVE('',#136825,#136757,#136833,.T.); +#136833 = LINE('',#136834,#136835); +#136834 = CARTESIAN_POINT('',(210.05165,-123.8231,1.585)); +#136835 = VECTOR('',#136836,1.); +#136836 = DIRECTION('',(1.,0.,0.)); +#136837 = FACE_BOUND('',#136838,.F.); +#136838 = EDGE_LOOP('',(#136839,#136849,#136857,#136865)); +#136839 = ORIENTED_EDGE('',*,*,#136840,.T.); +#136840 = EDGE_CURVE('',#136841,#136843,#136845,.T.); +#136841 = VERTEX_POINT('',#136842); +#136842 = CARTESIAN_POINT('',(208.43165,-123.8131,1.585)); +#136843 = VERTEX_POINT('',#136844); +#136844 = CARTESIAN_POINT('',(208.43165,-122.1331,1.585)); +#136845 = LINE('',#136846,#136847); +#136846 = CARTESIAN_POINT('',(208.43165,-123.8131,1.585)); +#136847 = VECTOR('',#136848,1.); +#136848 = DIRECTION('',(0.,1.,0.)); +#136849 = ORIENTED_EDGE('',*,*,#136850,.T.); +#136850 = EDGE_CURVE('',#136843,#136851,#136853,.T.); +#136851 = VERTEX_POINT('',#136852); +#136852 = CARTESIAN_POINT('',(207.80165,-122.1331,1.585)); +#136853 = LINE('',#136854,#136855); +#136854 = CARTESIAN_POINT('',(208.43165,-122.1331,1.585)); +#136855 = VECTOR('',#136856,1.); +#136856 = DIRECTION('',(-1.,0.,0.)); +#136857 = ORIENTED_EDGE('',*,*,#136858,.T.); +#136858 = EDGE_CURVE('',#136851,#136859,#136861,.T.); +#136859 = VERTEX_POINT('',#136860); +#136860 = CARTESIAN_POINT('',(207.80165,-123.8131,1.585)); +#136861 = LINE('',#136862,#136863); +#136862 = CARTESIAN_POINT('',(207.80165,-122.1331,1.585)); +#136863 = VECTOR('',#136864,1.); +#136864 = DIRECTION('',(0.,-1.,0.)); +#136865 = ORIENTED_EDGE('',*,*,#136866,.T.); +#136866 = EDGE_CURVE('',#136859,#136841,#136867,.T.); +#136867 = LINE('',#136868,#136869); +#136868 = CARTESIAN_POINT('',(207.80165,-123.8131,1.585)); +#136869 = VECTOR('',#136870,1.); +#136870 = DIRECTION('',(1.,0.,0.)); +#136871 = FACE_BOUND('',#136872,.F.); +#136872 = EDGE_LOOP('',(#136873,#136883,#136891,#136899)); +#136873 = ORIENTED_EDGE('',*,*,#136874,.T.); +#136874 = EDGE_CURVE('',#136875,#136877,#136879,.T.); +#136875 = VERTEX_POINT('',#136876); +#136876 = CARTESIAN_POINT('',(208.43165,-120.5131,1.585)); +#136877 = VERTEX_POINT('',#136878); +#136878 = CARTESIAN_POINT('',(208.43165,-119.6331,1.585)); +#136879 = LINE('',#136880,#136881); +#136880 = CARTESIAN_POINT('',(208.43165,-120.5131,1.585)); +#136881 = VECTOR('',#136882,1.); +#136882 = DIRECTION('',(0.,1.,0.)); +#136883 = ORIENTED_EDGE('',*,*,#136884,.T.); +#136884 = EDGE_CURVE('',#136877,#136885,#136887,.T.); +#136885 = VERTEX_POINT('',#136886); +#136886 = CARTESIAN_POINT('',(207.80165,-119.6331,1.585)); +#136887 = LINE('',#136888,#136889); +#136888 = CARTESIAN_POINT('',(208.43165,-119.6331,1.585)); +#136889 = VECTOR('',#136890,1.); +#136890 = DIRECTION('',(-1.,0.,0.)); +#136891 = ORIENTED_EDGE('',*,*,#136892,.T.); +#136892 = EDGE_CURVE('',#136885,#136893,#136895,.T.); +#136893 = VERTEX_POINT('',#136894); +#136894 = CARTESIAN_POINT('',(207.80165,-120.5131,1.585)); +#136895 = LINE('',#136896,#136897); +#136896 = CARTESIAN_POINT('',(207.80165,-119.6331,1.585)); +#136897 = VECTOR('',#136898,1.); +#136898 = DIRECTION('',(0.,-1.,0.)); +#136899 = ORIENTED_EDGE('',*,*,#136900,.T.); +#136900 = EDGE_CURVE('',#136893,#136875,#136901,.T.); +#136901 = LINE('',#136902,#136903); +#136902 = CARTESIAN_POINT('',(207.80165,-120.5131,1.585)); +#136903 = VECTOR('',#136904,1.); +#136904 = DIRECTION('',(1.,0.,0.)); +#136905 = FACE_BOUND('',#136906,.F.); +#136906 = EDGE_LOOP('',(#136907,#136917,#136925,#136933)); +#136907 = ORIENTED_EDGE('',*,*,#136908,.T.); +#136908 = EDGE_CURVE('',#136909,#136911,#136913,.T.); +#136909 = VERTEX_POINT('',#136910); +#136910 = CARTESIAN_POINT('',(208.43165,-118.0131,1.585)); +#136911 = VERTEX_POINT('',#136912); +#136912 = CARTESIAN_POINT('',(208.43165,-116.3331,1.585)); +#136913 = LINE('',#136914,#136915); +#136914 = CARTESIAN_POINT('',(208.43165,-118.0131,1.585)); +#136915 = VECTOR('',#136916,1.); +#136916 = DIRECTION('',(0.,1.,0.)); +#136917 = ORIENTED_EDGE('',*,*,#136918,.T.); +#136918 = EDGE_CURVE('',#136911,#136919,#136921,.T.); +#136919 = VERTEX_POINT('',#136920); +#136920 = CARTESIAN_POINT('',(207.80165,-116.3331,1.585)); +#136921 = LINE('',#136922,#136923); +#136922 = CARTESIAN_POINT('',(208.43165,-116.3331,1.585)); +#136923 = VECTOR('',#136924,1.); +#136924 = DIRECTION('',(-1.,0.,0.)); +#136925 = ORIENTED_EDGE('',*,*,#136926,.T.); +#136926 = EDGE_CURVE('',#136919,#136927,#136929,.T.); +#136927 = VERTEX_POINT('',#136928); +#136928 = CARTESIAN_POINT('',(207.80165,-118.0131,1.585)); +#136929 = LINE('',#136930,#136931); +#136930 = CARTESIAN_POINT('',(207.80165,-116.3331,1.585)); +#136931 = VECTOR('',#136932,1.); +#136932 = DIRECTION('',(0.,-1.,0.)); +#136933 = ORIENTED_EDGE('',*,*,#136934,.T.); +#136934 = EDGE_CURVE('',#136927,#136909,#136935,.T.); +#136935 = LINE('',#136936,#136937); +#136936 = CARTESIAN_POINT('',(207.80165,-118.0131,1.585)); +#136937 = VECTOR('',#136938,1.); +#136938 = DIRECTION('',(1.,0.,0.)); +#136939 = PLANE('',#136940); +#136940 = AXIS2_PLACEMENT_3D('',#136941,#136942,#136943); +#136941 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136942 = DIRECTION('',(0.,0.,1.)); +#136943 = DIRECTION('',(1.,0.,-0.)); +#136944 = SHELL_BASED_SURFACE_MODEL('',(#136945)); +#136945 = OPEN_SHELL('',(#136946)); +#136946 = ADVANCED_FACE('',(#136947),#137122,.T.); +#136947 = FACE_BOUND('',#136948,.F.); +#136948 = EDGE_LOOP('',(#136949,#136959,#136967,#136975,#136983,#136991, + #137000,#137008,#137017,#137025,#137033,#137041,#137049,#137057, + #137066,#137074,#137082,#137090,#137099,#137107,#137116)); +#136949 = ORIENTED_EDGE('',*,*,#136950,.T.); +#136950 = EDGE_CURVE('',#136951,#136953,#136955,.T.); +#136951 = VERTEX_POINT('',#136952); +#136952 = CARTESIAN_POINT('',(163.480216,-123.091643,1.585)); +#136953 = VERTEX_POINT('',#136954); +#136954 = CARTESIAN_POINT('',(163.600663,-123.033583,1.585)); +#136955 = LINE('',#136956,#136957); +#136956 = CARTESIAN_POINT('',(163.480216,-123.091643,1.585)); +#136957 = VECTOR('',#136958,1.); +#136958 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#136959 = ORIENTED_EDGE('',*,*,#136960,.T.); +#136960 = EDGE_CURVE('',#136953,#136961,#136963,.T.); +#136961 = VERTEX_POINT('',#136962); +#136962 = CARTESIAN_POINT('',(163.717938,-123.032871,1.585)); +#136963 = LINE('',#136964,#136965); +#136964 = CARTESIAN_POINT('',(163.600663,-123.033583,1.585)); +#136965 = VECTOR('',#136966,1.); +#136966 = DIRECTION('',(0.999981570774,6.071088282957E-03,0.)); +#136967 = ORIENTED_EDGE('',*,*,#136968,.T.); +#136968 = EDGE_CURVE('',#136961,#136969,#136971,.T.); +#136969 = VERTEX_POINT('',#136970); +#136970 = CARTESIAN_POINT('',(163.895058,-123.092401,1.585)); +#136971 = LINE('',#136972,#136973); +#136972 = CARTESIAN_POINT('',(163.717938,-123.032871,1.585)); +#136973 = VECTOR('',#136974,1.); +#136974 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#136975 = ORIENTED_EDGE('',*,*,#136976,.T.); +#136976 = EDGE_CURVE('',#136969,#136977,#136979,.T.); +#136977 = VERTEX_POINT('',#136978); +#136978 = CARTESIAN_POINT('',(164.349819,-123.545123,1.585)); +#136979 = LINE('',#136980,#136981); +#136980 = CARTESIAN_POINT('',(163.895058,-123.092401,1.585)); +#136981 = VECTOR('',#136982,1.); +#136982 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#136983 = ORIENTED_EDGE('',*,*,#136984,.T.); +#136984 = EDGE_CURVE('',#136977,#136985,#136987,.T.); +#136985 = VERTEX_POINT('',#136986); +#136986 = CARTESIAN_POINT('',(164.35126,-123.09251,1.585)); +#136987 = LINE('',#136988,#136989); +#136988 = CARTESIAN_POINT('',(164.349819,-123.545123,1.585)); +#136989 = VECTOR('',#136990,1.); +#136990 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#136991 = ORIENTED_EDGE('',*,*,#136992,.T.); +#136992 = EDGE_CURVE('',#136985,#136993,#136995,.T.); +#136993 = VERTEX_POINT('',#136994); +#136994 = CARTESIAN_POINT('',(164.499819,-123.107142,1.585)); +#136995 = CIRCLE('',#136996,7.500006711464E-02); +#136996 = AXIS2_PLACEMENT_3D('',#136997,#136998,#136999); +#136997 = CARTESIAN_POINT('',(164.42481893288,-123.1071419328,1.585)); +#136998 = DIRECTION('',(0.,0.,-1.)); +#136999 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#137000 = ORIENTED_EDGE('',*,*,#137001,.T.); +#137001 = EDGE_CURVE('',#136993,#137002,#137004,.T.); +#137002 = VERTEX_POINT('',#137003); +#137003 = CARTESIAN_POINT('',(164.498378,-123.740821,1.585)); +#137004 = LINE('',#137005,#137006); +#137005 = CARTESIAN_POINT('',(164.499819,-123.107142,1.585)); +#137006 = VECTOR('',#137007,1.); +#137007 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#137008 = ORIENTED_EDGE('',*,*,#137009,.T.); +#137009 = EDGE_CURVE('',#137002,#137010,#137012,.T.); +#137010 = VERTEX_POINT('',#137011); +#137011 = CARTESIAN_POINT('',(164.439451,-123.799748,1.585)); +#137012 = CIRCLE('',#137013,7.499663284014E-02); +#137013 = AXIS2_PLACEMENT_3D('',#137014,#137015,#137016); +#137014 = CARTESIAN_POINT('',(164.42482198775,-123.7261919877,1.585)); +#137015 = DIRECTION('',(0.,0.,-1.)); +#137016 = DIRECTION('',(0.980790863049,-0.195062254064,0.)); +#137017 = ORIENTED_EDGE('',*,*,#137018,.T.); +#137018 = EDGE_CURVE('',#137010,#137019,#137021,.T.); +#137019 = VERTEX_POINT('',#137020); +#137020 = CARTESIAN_POINT('',(164.402268,-123.796468,1.585)); +#137021 = LINE('',#137022,#137023); +#137022 = CARTESIAN_POINT('',(164.439451,-123.799748,1.585)); +#137023 = VECTOR('',#137024,1.); +#137024 = DIRECTION('',(-0.996131850393,8.787113652145E-02,0.)); +#137025 = ORIENTED_EDGE('',*,*,#137026,.T.); +#137026 = EDGE_CURVE('',#137019,#137027,#137029,.T.); +#137027 = VERTEX_POINT('',#137028); +#137028 = CARTESIAN_POINT('',(164.371786,-123.779222,1.585)); +#137029 = LINE('',#137030,#137031); +#137030 = CARTESIAN_POINT('',(164.402268,-123.796468,1.585)); +#137031 = VECTOR('',#137032,1.); +#137032 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#137033 = ORIENTED_EDGE('',*,*,#137034,.T.); +#137034 = EDGE_CURVE('',#137027,#137035,#137037,.T.); +#137035 = VERTEX_POINT('',#137036); +#137036 = CARTESIAN_POINT('',(163.812876,-123.220313,1.585)); +#137037 = LINE('',#137038,#137039); +#137038 = CARTESIAN_POINT('',(164.371786,-123.779222,1.585)); +#137039 = VECTOR('',#137040,1.); +#137040 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#137041 = ORIENTED_EDGE('',*,*,#137042,.T.); +#137042 = EDGE_CURVE('',#137035,#137043,#137045,.T.); +#137043 = VERTEX_POINT('',#137044); +#137044 = CARTESIAN_POINT('',(163.698363,-123.182142,1.585)); +#137045 = LINE('',#137046,#137047); +#137046 = CARTESIAN_POINT('',(163.812876,-123.220313,1.585)); +#137047 = VECTOR('',#137048,1.); +#137048 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#137049 = ORIENTED_EDGE('',*,*,#137050,.T.); +#137050 = EDGE_CURVE('',#137043,#137051,#137053,.T.); +#137051 = VERTEX_POINT('',#137052); +#137052 = CARTESIAN_POINT('',(163.633,-123.182142,1.585)); +#137053 = LINE('',#137054,#137055); +#137054 = CARTESIAN_POINT('',(163.698363,-123.182142,1.585)); +#137055 = VECTOR('',#137056,1.); +#137056 = DIRECTION('',(-1.,0.,0.)); +#137057 = ORIENTED_EDGE('',*,*,#137058,.T.); +#137058 = EDGE_CURVE('',#137051,#137059,#137061,.T.); +#137059 = VERTEX_POINT('',#137060); +#137060 = CARTESIAN_POINT('',(163.499819,-123.315323,1.585)); +#137061 = CIRCLE('',#137062,0.18686440374); +#137062 = AXIS2_PLACEMENT_3D('',#137063,#137064,#137065); +#137063 = CARTESIAN_POINT('',(163.680536,-123.362859,1.585)); +#137064 = DIRECTION('',(0.,0.,1.)); +#137065 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#137066 = ORIENTED_EDGE('',*,*,#137067,.T.); +#137067 = EDGE_CURVE('',#137059,#137068,#137070,.T.); +#137068 = VERTEX_POINT('',#137069); +#137069 = CARTESIAN_POINT('',(163.499819,-123.518008,1.585)); +#137070 = LINE('',#137071,#137072); +#137071 = CARTESIAN_POINT('',(163.499819,-123.315323,1.585)); +#137072 = VECTOR('',#137073,1.); +#137073 = DIRECTION('',(0.,-1.,0.)); +#137074 = ORIENTED_EDGE('',*,*,#137075,.T.); +#137075 = EDGE_CURVE('',#137068,#137076,#137078,.T.); +#137076 = VERTEX_POINT('',#137077); +#137077 = CARTESIAN_POINT('',(163.534077,-123.586524,1.585)); +#137078 = LINE('',#137079,#137080); +#137079 = CARTESIAN_POINT('',(163.499819,-123.518008,1.585)); +#137080 = VECTOR('',#137081,1.); +#137081 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#137082 = ORIENTED_EDGE('',*,*,#137083,.T.); +#137083 = EDGE_CURVE('',#137076,#137084,#137086,.T.); +#137084 = VERTEX_POINT('',#137085); +#137085 = CARTESIAN_POINT('',(163.582417,-123.636902,1.585)); +#137086 = LINE('',#137087,#137088); +#137087 = CARTESIAN_POINT('',(163.534077,-123.586524,1.585)); +#137088 = VECTOR('',#137089,1.); +#137089 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#137090 = ORIENTED_EDGE('',*,*,#137091,.T.); +#137091 = EDGE_CURVE('',#137084,#137092,#137094,.T.); +#137092 = VERTEX_POINT('',#137093); +#137093 = CARTESIAN_POINT('',(163.467024,-123.731603,1.585)); +#137094 = CIRCLE('',#137095,7.500003178655E-02); +#137095 = AXIS2_PLACEMENT_3D('',#137096,#137097,#137098); +#137096 = CARTESIAN_POINT('',(163.52005656212,-123.6785695,1.585)); +#137097 = DIRECTION('',(0.,0.,-1.)); +#137098 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#137099 = ORIENTED_EDGE('',*,*,#137100,.T.); +#137100 = EDGE_CURVE('',#137092,#137101,#137103,.T.); +#137101 = VERTEX_POINT('',#137102); +#137102 = CARTESIAN_POINT('',(163.405356,-123.664492,1.585)); +#137103 = LINE('',#137104,#137105); +#137104 = CARTESIAN_POINT('',(163.467024,-123.731603,1.585)); +#137105 = VECTOR('',#137106,1.); +#137106 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#137107 = ORIENTED_EDGE('',*,*,#137108,.T.); +#137108 = EDGE_CURVE('',#137101,#137109,#137111,.T.); +#137109 = VERTEX_POINT('',#137110); +#137110 = CARTESIAN_POINT('',(163.414686,-123.155096,1.585)); +#137111 = CIRCLE('',#137112,0.450051227017); +#137112 = AXIS2_PLACEMENT_3D('',#137113,#137114,#137115); +#137113 = CARTESIAN_POINT('',(163.78097532415,-123.4165883286,1.585)); +#137114 = DIRECTION('',(0.,0.,-1.)); +#137115 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#137116 = ORIENTED_EDGE('',*,*,#137117,.T.); +#137117 = EDGE_CURVE('',#137109,#136951,#137118,.T.); +#137118 = LINE('',#137119,#137120); +#137119 = CARTESIAN_POINT('',(163.414686,-123.155096,1.585)); +#137120 = VECTOR('',#137121,1.); +#137121 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#137122 = PLANE('',#137123); +#137123 = AXIS2_PLACEMENT_3D('',#137124,#137125,#137126); +#137124 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137125 = DIRECTION('',(0.,0.,1.)); +#137126 = DIRECTION('',(1.,0.,-0.)); +#137127 = SHELL_BASED_SURFACE_MODEL('',(#137128)); +#137128 = OPEN_SHELL('',(#137129)); +#137129 = ADVANCED_FACE('',(#137130),#137264,.T.); +#137130 = FACE_BOUND('',#137131,.F.); +#137131 = EDGE_LOOP('',(#137132,#137143,#137151,#137160,#137168,#137176, + #137184,#137192,#137201,#137209,#137217,#137225,#137234,#137242, + #137250,#137258)); +#137132 = ORIENTED_EDGE('',*,*,#137133,.T.); +#137133 = EDGE_CURVE('',#137134,#137136,#137138,.T.); +#137134 = VERTEX_POINT('',#137135); +#137135 = CARTESIAN_POINT('',(160.408151,-123.044782,1.585)); +#137136 = VERTEX_POINT('',#137137); +#137137 = CARTESIAN_POINT('',(160.524819,-123.107142,1.585)); +#137138 = CIRCLE('',#137139,7.500000000004E-02); +#137139 = AXIS2_PLACEMENT_3D('',#137140,#137141,#137142); +#137140 = CARTESIAN_POINT('',(160.449819,-123.1071420655,1.585)); +#137141 = DIRECTION('',(0.,0.,-1.)); +#137142 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#137143 = ORIENTED_EDGE('',*,*,#137144,.T.); +#137144 = EDGE_CURVE('',#137136,#137145,#137147,.T.); +#137145 = VERTEX_POINT('',#137146); +#137146 = CARTESIAN_POINT('',(160.523378,-123.693202,1.585)); +#137147 = LINE('',#137148,#137149); +#137148 = CARTESIAN_POINT('',(160.524819,-123.107142,1.585)); +#137149 = VECTOR('',#137150,1.); +#137150 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#137151 = ORIENTED_EDGE('',*,*,#137152,.T.); +#137152 = EDGE_CURVE('',#137145,#137153,#137155,.T.); +#137153 = VERTEX_POINT('',#137154); +#137154 = CARTESIAN_POINT('',(160.374819,-123.67857,1.585)); +#137155 = CIRCLE('',#137156,7.500006711464E-02); +#137156 = AXIS2_PLACEMENT_3D('',#137157,#137158,#137159); +#137157 = CARTESIAN_POINT('',(160.44981906711,-123.6785700671,1.585)); +#137158 = DIRECTION('',(-0.,0.,-1.)); +#137159 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#137160 = ORIENTED_EDGE('',*,*,#137161,.T.); +#137161 = EDGE_CURVE('',#137153,#137162,#137164,.T.); +#137162 = VERTEX_POINT('',#137163); +#137163 = CARTESIAN_POINT('',(160.374819,-123.467856,1.585)); +#137164 = LINE('',#137165,#137166); +#137165 = CARTESIAN_POINT('',(160.374819,-123.67857,1.585)); +#137166 = VECTOR('',#137167,1.); +#137167 = DIRECTION('',(0.,1.,0.)); +#137168 = ORIENTED_EDGE('',*,*,#137169,.T.); +#137169 = EDGE_CURVE('',#137162,#137170,#137172,.T.); +#137170 = VERTEX_POINT('',#137171); +#137171 = CARTESIAN_POINT('',(159.678504,-123.467856,1.585)); +#137172 = LINE('',#137173,#137174); +#137173 = CARTESIAN_POINT('',(160.374819,-123.467856,1.585)); +#137174 = VECTOR('',#137175,1.); +#137175 = DIRECTION('',(-1.,0.,0.)); +#137176 = ORIENTED_EDGE('',*,*,#137177,.T.); +#137177 = EDGE_CURVE('',#137170,#137178,#137180,.T.); +#137178 = VERTEX_POINT('',#137179); +#137179 = CARTESIAN_POINT('',(159.751033,-123.543496,1.585)); +#137180 = LINE('',#137181,#137182); +#137181 = CARTESIAN_POINT('',(159.678504,-123.467856,1.585)); +#137182 = VECTOR('',#137183,1.); +#137183 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#137184 = ORIENTED_EDGE('',*,*,#137185,.T.); +#137185 = EDGE_CURVE('',#137178,#137186,#137188,.T.); +#137186 = VERTEX_POINT('',#137187); +#137187 = CARTESIAN_POINT('',(159.80787,-123.65876,1.585)); +#137188 = LINE('',#137189,#137190); +#137189 = CARTESIAN_POINT('',(159.751033,-123.543496,1.585)); +#137190 = VECTOR('',#137191,1.); +#137191 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#137192 = ORIENTED_EDGE('',*,*,#137193,.T.); +#137193 = EDGE_CURVE('',#137186,#137194,#137196,.T.); +#137194 = VERTEX_POINT('',#137195); +#137195 = CARTESIAN_POINT('',(159.668451,-123.712111,1.585)); +#137196 = CIRCLE('',#137197,7.500029440469E-02); +#137197 = AXIS2_PLACEMENT_3D('',#137198,#137199,#137200); +#137198 = CARTESIAN_POINT('',(159.73553305397,-123.6785693513,1.585)); +#137199 = DIRECTION('',(0.,0.,-1.)); +#137200 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#137201 = ORIENTED_EDGE('',*,*,#137202,.T.); +#137202 = EDGE_CURVE('',#137194,#137203,#137205,.T.); +#137203 = VERTEX_POINT('',#137204); +#137204 = CARTESIAN_POINT('',(159.626275,-123.627759,1.585)); +#137205 = LINE('',#137206,#137207); +#137206 = CARTESIAN_POINT('',(159.668451,-123.712111,1.585)); +#137207 = VECTOR('',#137208,1.); +#137208 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#137209 = ORIENTED_EDGE('',*,*,#137210,.T.); +#137210 = EDGE_CURVE('',#137203,#137211,#137213,.T.); +#137211 = VERTEX_POINT('',#137212); +#137212 = CARTESIAN_POINT('',(159.544894,-123.546378,1.585)); +#137213 = LINE('',#137214,#137215); +#137214 = CARTESIAN_POINT('',(159.626275,-123.627759,1.585)); +#137215 = VECTOR('',#137216,1.); +#137216 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#137217 = ORIENTED_EDGE('',*,*,#137218,.T.); +#137218 = EDGE_CURVE('',#137211,#137219,#137221,.T.); +#137219 = VERTEX_POINT('',#137220); +#137220 = CARTESIAN_POINT('',(159.396841,-123.445944,1.585)); +#137221 = LINE('',#137222,#137223); +#137222 = CARTESIAN_POINT('',(159.544894,-123.546378,1.585)); +#137223 = VECTOR('',#137224,1.); +#137224 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#137225 = ORIENTED_EDGE('',*,*,#137226,.T.); +#137226 = EDGE_CURVE('',#137219,#137227,#137229,.T.); +#137227 = VERTEX_POINT('',#137228); +#137228 = CARTESIAN_POINT('',(159.449819,-123.317856,1.585)); +#137229 = CIRCLE('',#137230,7.499993751707E-02); +#137230 = AXIS2_PLACEMENT_3D('',#137231,#137232,#137233); +#137231 = CARTESIAN_POINT('',(159.44981880902,-123.3928559375,1.585)); +#137232 = DIRECTION('',(0.,0.,-1.)); +#137233 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#137234 = ORIENTED_EDGE('',*,*,#137235,.T.); +#137235 = EDGE_CURVE('',#137227,#137236,#137238,.T.); +#137236 = VERTEX_POINT('',#137237); +#137237 = CARTESIAN_POINT('',(160.374819,-123.317856,1.585)); +#137238 = LINE('',#137239,#137240); +#137239 = CARTESIAN_POINT('',(159.449819,-123.317856,1.585)); +#137240 = VECTOR('',#137241,1.); +#137241 = DIRECTION('',(1.,0.,0.)); +#137242 = ORIENTED_EDGE('',*,*,#137243,.T.); +#137243 = EDGE_CURVE('',#137236,#137244,#137246,.T.); +#137244 = VERTEX_POINT('',#137245); +#137245 = CARTESIAN_POINT('',(160.37626,-123.09251,1.585)); +#137246 = LINE('',#137247,#137248); +#137247 = CARTESIAN_POINT('',(160.374819,-123.317856,1.585)); +#137248 = VECTOR('',#137249,1.); +#137249 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#137250 = ORIENTED_EDGE('',*,*,#137251,.T.); +#137251 = EDGE_CURVE('',#137244,#137252,#137254,.T.); +#137252 = VERTEX_POINT('',#137253); +#137253 = CARTESIAN_POINT('',(160.387459,-123.065474,1.585)); +#137254 = LINE('',#137255,#137256); +#137255 = CARTESIAN_POINT('',(160.37626,-123.09251,1.585)); +#137256 = VECTOR('',#137257,1.); +#137257 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#137258 = ORIENTED_EDGE('',*,*,#137259,.T.); +#137259 = EDGE_CURVE('',#137252,#137134,#137260,.T.); +#137260 = LINE('',#137261,#137262); +#137261 = CARTESIAN_POINT('',(160.387459,-123.065474,1.585)); +#137262 = VECTOR('',#137263,1.); +#137263 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#137264 = PLANE('',#137265); +#137265 = AXIS2_PLACEMENT_3D('',#137266,#137267,#137268); +#137266 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137267 = DIRECTION('',(0.,0.,1.)); +#137268 = DIRECTION('',(1.,0.,-0.)); +#137269 = SHELL_BASED_SURFACE_MODEL('',(#137270)); +#137270 = OPEN_SHELL('',(#137271)); +#137271 = ADVANCED_FACE('',(#137272),#137388,.T.); +#137272 = FACE_BOUND('',#137273,.F.); +#137273 = EDGE_LOOP('',(#137274,#137285,#137293,#137301,#137309,#137318, + #137326,#137334,#137342,#137350,#137358,#137366,#137374,#137382)); +#137274 = ORIENTED_EDGE('',*,*,#137275,.T.); +#137275 = EDGE_CURVE('',#137276,#137278,#137280,.T.); +#137276 = VERTEX_POINT('',#137277); +#137277 = CARTESIAN_POINT('',(163.486217,-120.350139,1.585)); +#137278 = VERTEX_POINT('',#137279); +#137279 = CARTESIAN_POINT('',(163.584076,-120.330674,1.585)); +#137280 = CIRCLE('',#137281,5.999850008893E-02); +#137281 = AXIS2_PLACEMENT_3D('',#137282,#137283,#137284); +#137282 = CARTESIAN_POINT('',(163.54164907544,-120.3730977679,1.585)); +#137283 = DIRECTION('',(0.,0.,-1.)); +#137284 = DIRECTION('',(-0.923891019961,0.382655698031,0.)); +#137285 = ORIENTED_EDGE('',*,*,#137286,.T.); +#137286 = EDGE_CURVE('',#137278,#137287,#137289,.T.); +#137287 = VERTEX_POINT('',#137288); +#137288 = CARTESIAN_POINT('',(165.666503,-122.4131,1.585)); +#137289 = LINE('',#137290,#137291); +#137290 = CARTESIAN_POINT('',(163.584076,-120.330674,1.585)); +#137291 = VECTOR('',#137292,1.); +#137292 = DIRECTION('',(0.707106950966,-0.707106611407,0.)); +#137293 = ORIENTED_EDGE('',*,*,#137294,.T.); +#137294 = EDGE_CURVE('',#137287,#137295,#137297,.T.); +#137295 = VERTEX_POINT('',#137296); +#137296 = CARTESIAN_POINT('',(169.716798,-122.4131,1.585)); +#137297 = LINE('',#137298,#137299); +#137298 = CARTESIAN_POINT('',(165.666503,-122.4131,1.585)); +#137299 = VECTOR('',#137300,1.); +#137300 = DIRECTION('',(1.,0.,0.)); +#137301 = ORIENTED_EDGE('',*,*,#137302,.T.); +#137302 = EDGE_CURVE('',#137295,#137303,#137305,.T.); +#137303 = VERTEX_POINT('',#137304); +#137304 = CARTESIAN_POINT('',(171.799223,-120.330674,1.585)); +#137305 = LINE('',#137306,#137307); +#137306 = CARTESIAN_POINT('',(169.716798,-122.4131,1.585)); +#137307 = VECTOR('',#137308,1.); +#137308 = DIRECTION('',(0.707106611407,0.707106950966,0.)); +#137309 = ORIENTED_EDGE('',*,*,#137310,.T.); +#137310 = EDGE_CURVE('',#137303,#137311,#137313,.T.); +#137311 = VERTEX_POINT('',#137312); +#137312 = CARTESIAN_POINT('',(171.884076,-120.415527,1.585)); +#137313 = CIRCLE('',#137314,6.000013170922E-02); +#137314 = AXIS2_PLACEMENT_3D('',#137315,#137316,#137317); +#137315 = CARTESIAN_POINT('',(171.8416500587,-120.3730999412,1.585)); +#137316 = DIRECTION('',(0.,0.,-1.)); +#137317 = DIRECTION('',(-0.707116092923,0.707097469327,0.)); +#137318 = ORIENTED_EDGE('',*,*,#137319,.T.); +#137319 = EDGE_CURVE('',#137311,#137320,#137322,.T.); +#137320 = VERTEX_POINT('',#137321); +#137321 = CARTESIAN_POINT('',(169.784076,-122.515526,1.585)); +#137322 = LINE('',#137323,#137324); +#137323 = CARTESIAN_POINT('',(171.884076,-120.415527,1.585)); +#137324 = VECTOR('',#137325,1.); +#137325 = DIRECTION('',(-0.707106949545,-0.707106612828,0.)); +#137326 = ORIENTED_EDGE('',*,*,#137327,.T.); +#137327 = EDGE_CURVE('',#137320,#137328,#137330,.T.); +#137328 = VERTEX_POINT('',#137329); +#137329 = CARTESIAN_POINT('',(169.764611,-122.528533,1.585)); +#137330 = LINE('',#137331,#137332); +#137331 = CARTESIAN_POINT('',(169.784076,-122.515526,1.585)); +#137332 = VECTOR('',#137333,1.); +#137333 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#137334 = ORIENTED_EDGE('',*,*,#137335,.T.); +#137335 = EDGE_CURVE('',#137328,#137336,#137338,.T.); +#137336 = VERTEX_POINT('',#137337); +#137337 = CARTESIAN_POINT('',(169.74165,-122.5331,1.585)); +#137338 = LINE('',#137339,#137340); +#137339 = CARTESIAN_POINT('',(169.764611,-122.528533,1.585)); +#137340 = VECTOR('',#137341,1.); +#137341 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#137342 = ORIENTED_EDGE('',*,*,#137343,.T.); +#137343 = EDGE_CURVE('',#137336,#137344,#137346,.T.); +#137344 = VERTEX_POINT('',#137345); +#137345 = CARTESIAN_POINT('',(165.64165,-122.5331,1.585)); +#137346 = LINE('',#137347,#137348); +#137347 = CARTESIAN_POINT('',(169.74165,-122.5331,1.585)); +#137348 = VECTOR('',#137349,1.); +#137349 = DIRECTION('',(-1.,0.,0.)); +#137350 = ORIENTED_EDGE('',*,*,#137351,.T.); +#137351 = EDGE_CURVE('',#137344,#137352,#137354,.T.); +#137352 = VERTEX_POINT('',#137353); +#137353 = CARTESIAN_POINT('',(165.618688,-122.528533,1.585)); +#137354 = LINE('',#137355,#137356); +#137355 = CARTESIAN_POINT('',(165.64165,-122.5331,1.585)); +#137356 = VECTOR('',#137357,1.); +#137357 = DIRECTION('',(-0.980788760097,0.195072827601,0.)); +#137358 = ORIENTED_EDGE('',*,*,#137359,.T.); +#137359 = EDGE_CURVE('',#137352,#137360,#137362,.T.); +#137360 = VERTEX_POINT('',#137361); +#137361 = CARTESIAN_POINT('',(165.599223,-122.515526,1.585)); +#137362 = LINE('',#137363,#137364); +#137363 = CARTESIAN_POINT('',(165.618688,-122.528533,1.585)); +#137364 = VECTOR('',#137365,1.); +#137365 = DIRECTION('',(-0.831451797698,0.555596893535,0.)); +#137366 = ORIENTED_EDGE('',*,*,#137367,.T.); +#137367 = EDGE_CURVE('',#137360,#137368,#137370,.T.); +#137368 = VERTEX_POINT('',#137369); +#137369 = CARTESIAN_POINT('',(163.499224,-120.415526,1.585)); +#137370 = LINE('',#137371,#137372); +#137371 = CARTESIAN_POINT('',(165.599223,-122.515526,1.585)); +#137372 = VECTOR('',#137373,1.); +#137373 = DIRECTION('',(-0.707106612828,0.707106949545,0.)); +#137374 = ORIENTED_EDGE('',*,*,#137375,.T.); +#137375 = EDGE_CURVE('',#137368,#137376,#137378,.T.); +#137376 = VERTEX_POINT('',#137377); +#137377 = CARTESIAN_POINT('',(163.486217,-120.396061,1.585)); +#137378 = LINE('',#137379,#137380); +#137379 = CARTESIAN_POINT('',(163.499224,-120.415526,1.585)); +#137380 = VECTOR('',#137381,1.); +#137381 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#137382 = ORIENTED_EDGE('',*,*,#137383,.T.); +#137383 = EDGE_CURVE('',#137376,#137276,#137384,.T.); +#137384 = LINE('',#137385,#137386); +#137385 = CARTESIAN_POINT('',(163.486217,-120.396061,1.585)); +#137386 = VECTOR('',#137387,1.); +#137387 = DIRECTION('',(0.,1.,0.)); +#137388 = PLANE('',#137389); +#137389 = AXIS2_PLACEMENT_3D('',#137390,#137391,#137392); +#137390 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137391 = DIRECTION('',(0.,0.,1.)); +#137392 = DIRECTION('',(1.,0.,-0.)); +#137393 = SHELL_BASED_SURFACE_MODEL('',(#137394)); +#137394 = OPEN_SHELL('',(#137395)); +#137395 = ADVANCED_FACE('',(#137396,#137481),#137540,.T.); +#137396 = FACE_BOUND('',#137397,.F.); +#137397 = EDGE_LOOP('',(#137398,#137409,#137417,#137425,#137433,#137442, + #137450,#137459,#137467,#137475)); +#137398 = ORIENTED_EDGE('',*,*,#137399,.T.); +#137399 = EDGE_CURVE('',#137400,#137402,#137404,.T.); +#137400 = VERTEX_POINT('',#137401); +#137401 = CARTESIAN_POINT('',(206.151866,-120.700458,1.585)); +#137402 = VERTEX_POINT('',#137403); +#137403 = CARTESIAN_POINT('',(206.635776,-120.771354,1.585)); +#137404 = CIRCLE('',#137405,0.34461174713); +#137405 = AXIS2_PLACEMENT_3D('',#137406,#137407,#137408); +#137406 = CARTESIAN_POINT('',(206.35862294377,-120.9761549757,1.585)); +#137407 = DIRECTION('',(0.,0.,-1.)); +#137408 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#137409 = ORIENTED_EDGE('',*,*,#137410,.T.); +#137410 = EDGE_CURVE('',#137402,#137411,#137413,.T.); +#137411 = VERTEX_POINT('',#137412); +#137412 = CARTESIAN_POINT('',(206.693837,-120.891801,1.585)); +#137413 = LINE('',#137414,#137415); +#137414 = CARTESIAN_POINT('',(206.635776,-120.771354,1.585)); +#137415 = VECTOR('',#137416,1.); +#137416 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#137417 = ORIENTED_EDGE('',*,*,#137418,.T.); +#137418 = EDGE_CURVE('',#137411,#137419,#137421,.T.); +#137419 = VERTEX_POINT('',#137420); +#137420 = CARTESIAN_POINT('',(206.695278,-121.212385,1.585)); +#137421 = LINE('',#137422,#137423); +#137422 = CARTESIAN_POINT('',(206.693837,-120.891801,1.585)); +#137423 = VECTOR('',#137424,1.); +#137424 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#137425 = ORIENTED_EDGE('',*,*,#137426,.T.); +#137426 = EDGE_CURVE('',#137419,#137427,#137429,.T.); +#137427 = VERTEX_POINT('',#137428); +#137428 = CARTESIAN_POINT('',(207.111101,-121.213826,1.585)); +#137429 = LINE('',#137430,#137431); +#137430 = CARTESIAN_POINT('',(206.695278,-121.212385,1.585)); +#137431 = VECTOR('',#137432,1.); +#137432 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#137433 = ORIENTED_EDGE('',*,*,#137434,.T.); +#137434 = EDGE_CURVE('',#137427,#137435,#137437,.T.); +#137435 = VERTEX_POINT('',#137436); +#137436 = CARTESIAN_POINT('',(207.096469,-121.362385,1.585)); +#137437 = CIRCLE('',#137438,7.500006711464E-02); +#137438 = AXIS2_PLACEMENT_3D('',#137439,#137440,#137441); +#137439 = CARTESIAN_POINT('',(207.09646906711,-121.2873849328,1.585)); +#137440 = DIRECTION('',(0.,0.,-1.)); +#137441 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#137442 = ORIENTED_EDGE('',*,*,#137443,.T.); +#137443 = EDGE_CURVE('',#137435,#137444,#137446,.T.); +#137444 = VERTEX_POINT('',#137445); +#137445 = CARTESIAN_POINT('',(206.081837,-121.360944,1.585)); +#137446 = LINE('',#137447,#137448); +#137447 = CARTESIAN_POINT('',(207.096469,-121.362385,1.585)); +#137448 = VECTOR('',#137449,1.); +#137449 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#137450 = ORIENTED_EDGE('',*,*,#137451,.T.); +#137451 = EDGE_CURVE('',#137444,#137452,#137454,.T.); +#137452 = VERTEX_POINT('',#137453); +#137453 = CARTESIAN_POINT('',(206.021469,-121.287385,1.585)); +#137454 = CIRCLE('',#137455,7.500074938985E-02); +#137455 = AXIS2_PLACEMENT_3D('',#137456,#137457,#137458); +#137456 = CARTESIAN_POINT('',(206.09646974938,-121.2873845338,1.585)); +#137457 = DIRECTION('',(0.,0.,-1.)); +#137458 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#137459 = ORIENTED_EDGE('',*,*,#137460,.T.); +#137460 = EDGE_CURVE('',#137452,#137461,#137463,.T.); +#137461 = VERTEX_POINT('',#137462); +#137462 = CARTESIAN_POINT('',(206.024132,-120.886624,1.585)); +#137463 = LINE('',#137464,#137465); +#137464 = CARTESIAN_POINT('',(206.021469,-121.287385,1.585)); +#137465 = VECTOR('',#137466,1.); +#137466 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#137467 = ORIENTED_EDGE('',*,*,#137468,.T.); +#137468 = EDGE_CURVE('',#137461,#137469,#137471,.T.); +#137469 = VERTEX_POINT('',#137470); +#137470 = CARTESIAN_POINT('',(206.086336,-120.763911,1.585)); +#137471 = LINE('',#137472,#137473); +#137472 = CARTESIAN_POINT('',(206.024132,-120.886624,1.585)); +#137473 = VECTOR('',#137474,1.); +#137474 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#137475 = ORIENTED_EDGE('',*,*,#137476,.T.); +#137476 = EDGE_CURVE('',#137469,#137400,#137477,.T.); +#137477 = LINE('',#137478,#137479); +#137478 = CARTESIAN_POINT('',(206.086336,-120.763911,1.585)); +#137479 = VECTOR('',#137480,1.); +#137480 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#137481 = FACE_BOUND('',#137482,.F.); +#137482 = EDGE_LOOP('',(#137483,#137494,#137502,#137510,#137518,#137526, + #137534)); +#137483 = ORIENTED_EDGE('',*,*,#137484,.T.); +#137484 = EDGE_CURVE('',#137485,#137487,#137489,.T.); +#137485 = VERTEX_POINT('',#137486); +#137486 = CARTESIAN_POINT('',(206.480613,-120.825215,1.585)); +#137487 = VERTEX_POINT('',#137488); +#137488 = CARTESIAN_POINT('',(206.205727,-120.855622,1.585)); +#137489 = CIRCLE('',#137490,0.198386215365); +#137490 = AXIS2_PLACEMENT_3D('',#137491,#137492,#137493); +#137491 = CARTESIAN_POINT('',(206.35880995783,-120.9818071753,1.585)); +#137492 = DIRECTION('',(0.,0.,1.)); +#137493 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#137494 = ORIENTED_EDGE('',*,*,#137495,.T.); +#137495 = EDGE_CURVE('',#137487,#137496,#137498,.T.); +#137496 = VERTEX_POINT('',#137497); +#137497 = CARTESIAN_POINT('',(206.171469,-120.924138,1.585)); +#137498 = LINE('',#137499,#137500); +#137499 = CARTESIAN_POINT('',(206.205727,-120.855622,1.585)); +#137500 = VECTOR('',#137501,1.); +#137501 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#137502 = ORIENTED_EDGE('',*,*,#137503,.T.); +#137503 = EDGE_CURVE('',#137496,#137504,#137506,.T.); +#137504 = VERTEX_POINT('',#137505); +#137505 = CARTESIAN_POINT('',(206.171469,-121.212385,1.585)); +#137506 = LINE('',#137507,#137508); +#137507 = CARTESIAN_POINT('',(206.171469,-120.924138,1.585)); +#137508 = VECTOR('',#137509,1.); +#137509 = DIRECTION('',(0.,-1.,0.)); +#137510 = ORIENTED_EDGE('',*,*,#137511,.T.); +#137511 = EDGE_CURVE('',#137504,#137512,#137514,.T.); +#137512 = VERTEX_POINT('',#137513); +#137513 = CARTESIAN_POINT('',(206.545278,-121.212385,1.585)); +#137514 = LINE('',#137515,#137516); +#137515 = CARTESIAN_POINT('',(206.171469,-121.212385,1.585)); +#137516 = VECTOR('',#137517,1.); +#137517 = DIRECTION('',(1.,0.,0.)); +#137518 = ORIENTED_EDGE('',*,*,#137519,.T.); +#137519 = EDGE_CURVE('',#137512,#137520,#137522,.T.); +#137520 = VERTEX_POINT('',#137521); +#137521 = CARTESIAN_POINT('',(206.545278,-120.924138,1.585)); +#137522 = LINE('',#137523,#137524); +#137523 = CARTESIAN_POINT('',(206.545278,-121.212385,1.585)); +#137524 = VECTOR('',#137525,1.); +#137525 = DIRECTION('',(0.,1.,0.)); +#137526 = ORIENTED_EDGE('',*,*,#137527,.T.); +#137527 = EDGE_CURVE('',#137520,#137528,#137530,.T.); +#137528 = VERTEX_POINT('',#137529); +#137529 = CARTESIAN_POINT('',(206.51102,-120.855622,1.585)); +#137530 = LINE('',#137531,#137532); +#137531 = CARTESIAN_POINT('',(206.545278,-120.924138,1.585)); +#137532 = VECTOR('',#137533,1.); +#137533 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#137534 = ORIENTED_EDGE('',*,*,#137535,.T.); +#137535 = EDGE_CURVE('',#137528,#137485,#137536,.T.); +#137536 = LINE('',#137537,#137538); +#137537 = CARTESIAN_POINT('',(206.51102,-120.855622,1.585)); +#137538 = VECTOR('',#137539,1.); +#137539 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#137540 = PLANE('',#137541); +#137541 = AXIS2_PLACEMENT_3D('',#137542,#137543,#137544); +#137542 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137543 = DIRECTION('',(0.,0.,1.)); +#137544 = DIRECTION('',(1.,0.,-0.)); +#137545 = SHELL_BASED_SURFACE_MODEL('',(#137546)); +#137546 = OPEN_SHELL('',(#137547)); +#137547 = ADVANCED_FACE('',(#137548),#137673,.T.); +#137548 = FACE_BOUND('',#137549,.F.); +#137549 = EDGE_LOOP('',(#137550,#137560,#137568,#137577,#137585,#137594, + #137602,#137610,#137618,#137626,#137635,#137643,#137651,#137659, + #137667)); +#137550 = ORIENTED_EDGE('',*,*,#137551,.T.); +#137551 = EDGE_CURVE('',#137552,#137554,#137556,.T.); +#137552 = VERTEX_POINT('',#137553); +#137553 = CARTESIAN_POINT('',(182.823126,-118.857667,1.585)); +#137554 = VERTEX_POINT('',#137555); +#137555 = CARTESIAN_POINT('',(182.846087,-118.8531,1.585)); +#137556 = LINE('',#137557,#137558); +#137557 = CARTESIAN_POINT('',(182.823126,-118.857667,1.585)); +#137558 = VECTOR('',#137559,1.); +#137559 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#137560 = ORIENTED_EDGE('',*,*,#137561,.T.); +#137561 = EDGE_CURVE('',#137554,#137562,#137564,.T.); +#137562 = VERTEX_POINT('',#137563); +#137563 = CARTESIAN_POINT('',(188.60165,-118.8531,1.585)); +#137564 = LINE('',#137565,#137566); +#137565 = CARTESIAN_POINT('',(182.846087,-118.8531,1.585)); +#137566 = VECTOR('',#137567,1.); +#137567 = DIRECTION('',(1.,0.,0.)); +#137568 = ORIENTED_EDGE('',*,*,#137569,.T.); +#137569 = EDGE_CURVE('',#137562,#137570,#137572,.T.); +#137570 = VERTEX_POINT('',#137571); +#137571 = CARTESIAN_POINT('',(188.66165,-118.9131,1.585)); +#137572 = CIRCLE('',#137573,5.999932016264E-02); +#137573 = AXIS2_PLACEMENT_3D('',#137574,#137575,#137576); +#137574 = CARTESIAN_POINT('',(188.60165067984,-118.9130993201,1.585)); +#137575 = DIRECTION('',(0.,0.,-1.)); +#137576 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#137577 = ORIENTED_EDGE('',*,*,#137578,.T.); +#137578 = EDGE_CURVE('',#137570,#137579,#137581,.T.); +#137579 = VERTEX_POINT('',#137580); +#137580 = CARTESIAN_POINT('',(188.66165,-121.2631,1.585)); +#137581 = LINE('',#137582,#137583); +#137582 = CARTESIAN_POINT('',(188.66165,-118.9131,1.585)); +#137583 = VECTOR('',#137584,1.); +#137584 = DIRECTION('',(0.,-1.,0.)); +#137585 = ORIENTED_EDGE('',*,*,#137586,.T.); +#137586 = EDGE_CURVE('',#137579,#137587,#137589,.T.); +#137587 = VERTEX_POINT('',#137588); +#137588 = CARTESIAN_POINT('',(188.54165,-121.2631,1.585)); +#137589 = CIRCLE('',#137590,6.000000000042E-02); +#137590 = AXIS2_PLACEMENT_3D('',#137591,#137592,#137593); +#137591 = CARTESIAN_POINT('',(188.60165,-121.2631002255,1.585)); +#137592 = DIRECTION('',(0.,0.,-1.)); +#137593 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#137594 = ORIENTED_EDGE('',*,*,#137595,.T.); +#137595 = EDGE_CURVE('',#137587,#137596,#137598,.T.); +#137596 = VERTEX_POINT('',#137597); +#137597 = CARTESIAN_POINT('',(188.54165,-118.9731,1.585)); +#137598 = LINE('',#137599,#137600); +#137599 = CARTESIAN_POINT('',(188.54165,-121.2631,1.585)); +#137600 = VECTOR('',#137601,1.); +#137601 = DIRECTION('',(0.,1.,0.)); +#137602 = ORIENTED_EDGE('',*,*,#137603,.T.); +#137603 = EDGE_CURVE('',#137596,#137604,#137606,.T.); +#137604 = VERTEX_POINT('',#137605); +#137605 = CARTESIAN_POINT('',(182.87094,-118.9731,1.585)); +#137606 = LINE('',#137607,#137608); +#137607 = CARTESIAN_POINT('',(188.54165,-118.9731,1.585)); +#137608 = VECTOR('',#137609,1.); +#137609 = DIRECTION('',(-1.,0.,0.)); +#137610 = ORIENTED_EDGE('',*,*,#137611,.T.); +#137611 = EDGE_CURVE('',#137604,#137612,#137614,.T.); +#137612 = VERTEX_POINT('',#137613); +#137613 = CARTESIAN_POINT('',(181.84165,-120.002389,1.585)); +#137614 = LINE('',#137615,#137616); +#137615 = CARTESIAN_POINT('',(182.87094,-118.9731,1.585)); +#137616 = VECTOR('',#137617,1.); +#137617 = DIRECTION('',(-0.707107124679,-0.707106437694,0.)); +#137618 = ORIENTED_EDGE('',*,*,#137619,.T.); +#137619 = EDGE_CURVE('',#137612,#137620,#137622,.T.); +#137620 = VERTEX_POINT('',#137621); +#137621 = CARTESIAN_POINT('',(181.84165,-121.2631,1.585)); +#137622 = LINE('',#137623,#137624); +#137623 = CARTESIAN_POINT('',(181.84165,-120.002389,1.585)); +#137624 = VECTOR('',#137625,1.); +#137625 = DIRECTION('',(0.,-1.,0.)); +#137626 = ORIENTED_EDGE('',*,*,#137627,.T.); +#137627 = EDGE_CURVE('',#137620,#137628,#137630,.T.); +#137628 = VERTEX_POINT('',#137629); +#137629 = CARTESIAN_POINT('',(181.72165,-121.2631,1.585)); +#137630 = CIRCLE('',#137631,6.000000000041E-02); +#137631 = AXIS2_PLACEMENT_3D('',#137632,#137633,#137634); +#137632 = CARTESIAN_POINT('',(181.78165,-121.2631002255,1.585)); +#137633 = DIRECTION('',(0.,0.,-1.)); +#137634 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#137635 = ORIENTED_EDGE('',*,*,#137636,.T.); +#137636 = EDGE_CURVE('',#137628,#137637,#137639,.T.); +#137637 = VERTEX_POINT('',#137638); +#137638 = CARTESIAN_POINT('',(181.72165,-119.977537,1.585)); +#137639 = LINE('',#137640,#137641); +#137640 = CARTESIAN_POINT('',(181.72165,-121.2631,1.585)); +#137641 = VECTOR('',#137642,1.); +#137642 = DIRECTION('',(0.,1.,0.)); +#137643 = ORIENTED_EDGE('',*,*,#137644,.T.); +#137644 = EDGE_CURVE('',#137637,#137645,#137647,.T.); +#137645 = VERTEX_POINT('',#137646); +#137646 = CARTESIAN_POINT('',(181.726217,-119.954576,1.585)); +#137647 = LINE('',#137648,#137649); +#137648 = CARTESIAN_POINT('',(181.72165,-119.977537,1.585)); +#137649 = VECTOR('',#137650,1.); +#137650 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#137651 = ORIENTED_EDGE('',*,*,#137652,.T.); +#137652 = EDGE_CURVE('',#137645,#137653,#137655,.T.); +#137653 = VERTEX_POINT('',#137654); +#137654 = CARTESIAN_POINT('',(181.739224,-119.935111,1.585)); +#137655 = LINE('',#137656,#137657); +#137656 = CARTESIAN_POINT('',(181.726217,-119.954576,1.585)); +#137657 = VECTOR('',#137658,1.); +#137658 = DIRECTION('',(0.555596893535,0.831451797697,0.)); +#137659 = ORIENTED_EDGE('',*,*,#137660,.T.); +#137660 = EDGE_CURVE('',#137653,#137661,#137663,.T.); +#137661 = VERTEX_POINT('',#137662); +#137662 = CARTESIAN_POINT('',(182.80366,-118.870674,1.585)); +#137663 = LINE('',#137664,#137665); +#137664 = CARTESIAN_POINT('',(181.739224,-119.935111,1.585)); +#137665 = VECTOR('',#137666,1.); +#137666 = DIRECTION('',(0.707106449036,0.707107113337,0.)); +#137667 = ORIENTED_EDGE('',*,*,#137668,.T.); +#137668 = EDGE_CURVE('',#137661,#137552,#137669,.T.); +#137669 = LINE('',#137670,#137671); +#137670 = CARTESIAN_POINT('',(182.80366,-118.870674,1.585)); +#137671 = VECTOR('',#137672,1.); +#137672 = DIRECTION('',(0.831464982668,0.555577161695,0.)); +#137673 = PLANE('',#137674); +#137674 = AXIS2_PLACEMENT_3D('',#137675,#137676,#137677); +#137675 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137676 = DIRECTION('',(0.,0.,1.)); +#137677 = DIRECTION('',(1.,0.,-0.)); +#137678 = SHELL_BASED_SURFACE_MODEL('',(#137679)); +#137679 = OPEN_SHELL('',(#137680)); +#137680 = ADVANCED_FACE('',(#137681),#137791,.T.); +#137681 = FACE_BOUND('',#137682,.F.); +#137682 = EDGE_LOOP('',(#137683,#137694,#137702,#137710,#137719,#137727, + #137735,#137744,#137752,#137760,#137769,#137777,#137785)); +#137683 = ORIENTED_EDGE('',*,*,#137684,.T.); +#137684 = EDGE_CURVE('',#137685,#137687,#137689,.T.); +#137685 = VERTEX_POINT('',#137686); +#137686 = CARTESIAN_POINT('',(181.092467,-120.058889,1.585)); +#137687 = VERTEX_POINT('',#137688); +#137688 = CARTESIAN_POINT('',(181.2079,-120.08185,1.585)); +#137689 = CIRCLE('',#137690,6.000007318647E-02); +#137690 = AXIS2_PLACEMENT_3D('',#137691,#137692,#137693); +#137691 = CARTESIAN_POINT('',(181.14789992681,-120.0818498233,1.585)); +#137692 = DIRECTION('',(0.,0.,-1.)); +#137693 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#137694 = ORIENTED_EDGE('',*,*,#137695,.T.); +#137695 = EDGE_CURVE('',#137687,#137696,#137698,.T.); +#137696 = VERTEX_POINT('',#137697); +#137697 = CARTESIAN_POINT('',(181.2079,-120.4156,1.585)); +#137698 = LINE('',#137699,#137700); +#137699 = CARTESIAN_POINT('',(181.2079,-120.08185,1.585)); +#137700 = VECTOR('',#137701,1.); +#137701 = DIRECTION('',(0.,-1.,0.)); +#137702 = ORIENTED_EDGE('',*,*,#137703,.T.); +#137703 = EDGE_CURVE('',#137696,#137704,#137706,.T.); +#137704 = VERTEX_POINT('',#137705); +#137705 = CARTESIAN_POINT('',(181.54165,-120.4156,1.585)); +#137706 = LINE('',#137707,#137708); +#137707 = CARTESIAN_POINT('',(181.2079,-120.4156,1.585)); +#137708 = VECTOR('',#137709,1.); +#137709 = DIRECTION('',(1.,0.,0.)); +#137710 = ORIENTED_EDGE('',*,*,#137711,.T.); +#137711 = EDGE_CURVE('',#137704,#137712,#137714,.T.); +#137712 = VERTEX_POINT('',#137713); +#137713 = CARTESIAN_POINT('',(181.54165,-120.5356,1.585)); +#137714 = CIRCLE('',#137715,6.000000000043E-02); +#137715 = AXIS2_PLACEMENT_3D('',#137716,#137717,#137718); +#137716 = CARTESIAN_POINT('',(181.54165022558,-120.4756,1.585)); +#137717 = DIRECTION('',(0.,0.,-1.)); +#137718 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#137719 = ORIENTED_EDGE('',*,*,#137720,.T.); +#137720 = EDGE_CURVE('',#137712,#137721,#137723,.T.); +#137721 = VERTEX_POINT('',#137722); +#137722 = CARTESIAN_POINT('',(181.2079,-120.5356,1.585)); +#137723 = LINE('',#137724,#137725); +#137724 = CARTESIAN_POINT('',(181.54165,-120.5356,1.585)); +#137725 = VECTOR('',#137726,1.); +#137726 = DIRECTION('',(-1.,0.,0.)); +#137727 = ORIENTED_EDGE('',*,*,#137728,.T.); +#137728 = EDGE_CURVE('',#137721,#137729,#137731,.T.); +#137729 = VERTEX_POINT('',#137730); +#137730 = CARTESIAN_POINT('',(181.2079,-120.86935,1.585)); +#137731 = LINE('',#137732,#137733); +#137732 = CARTESIAN_POINT('',(181.2079,-120.5356,1.585)); +#137733 = VECTOR('',#137734,1.); +#137734 = DIRECTION('',(0.,-1.,0.)); +#137735 = ORIENTED_EDGE('',*,*,#137736,.T.); +#137736 = EDGE_CURVE('',#137729,#137737,#137739,.T.); +#137737 = VERTEX_POINT('',#137738); +#137738 = CARTESIAN_POINT('',(181.0879,-120.86935,1.585)); +#137739 = CIRCLE('',#137740,6.000000000043E-02); +#137740 = AXIS2_PLACEMENT_3D('',#137741,#137742,#137743); +#137741 = CARTESIAN_POINT('',(181.1479,-120.8693502255,1.585)); +#137742 = DIRECTION('',(0.,0.,-1.)); +#137743 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#137744 = ORIENTED_EDGE('',*,*,#137745,.T.); +#137745 = EDGE_CURVE('',#137737,#137746,#137748,.T.); +#137746 = VERTEX_POINT('',#137747); +#137747 = CARTESIAN_POINT('',(181.0879,-120.5356,1.585)); +#137748 = LINE('',#137749,#137750); +#137749 = CARTESIAN_POINT('',(181.0879,-120.86935,1.585)); +#137750 = VECTOR('',#137751,1.); +#137751 = DIRECTION('',(0.,1.,0.)); +#137752 = ORIENTED_EDGE('',*,*,#137753,.T.); +#137753 = EDGE_CURVE('',#137746,#137754,#137756,.T.); +#137754 = VERTEX_POINT('',#137755); +#137755 = CARTESIAN_POINT('',(180.75415,-120.5356,1.585)); +#137756 = LINE('',#137757,#137758); +#137757 = CARTESIAN_POINT('',(181.0879,-120.5356,1.585)); +#137758 = VECTOR('',#137759,1.); +#137759 = DIRECTION('',(-1.,0.,0.)); +#137760 = ORIENTED_EDGE('',*,*,#137761,.T.); +#137761 = EDGE_CURVE('',#137754,#137762,#137764,.T.); +#137762 = VERTEX_POINT('',#137763); +#137763 = CARTESIAN_POINT('',(180.75415,-120.4156,1.585)); +#137764 = CIRCLE('',#137765,6.000000000042E-02); +#137765 = AXIS2_PLACEMENT_3D('',#137766,#137767,#137768); +#137766 = CARTESIAN_POINT('',(180.75414977441,-120.4756,1.585)); +#137767 = DIRECTION('',(0.,0.,-1.)); +#137768 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#137769 = ORIENTED_EDGE('',*,*,#137770,.T.); +#137770 = EDGE_CURVE('',#137762,#137771,#137773,.T.); +#137771 = VERTEX_POINT('',#137772); +#137772 = CARTESIAN_POINT('',(181.0879,-120.4156,1.585)); +#137773 = LINE('',#137774,#137775); +#137774 = CARTESIAN_POINT('',(180.75415,-120.4156,1.585)); +#137775 = VECTOR('',#137776,1.); +#137776 = DIRECTION('',(1.,0.,0.)); +#137777 = ORIENTED_EDGE('',*,*,#137778,.T.); +#137778 = EDGE_CURVE('',#137771,#137779,#137781,.T.); +#137779 = VERTEX_POINT('',#137780); +#137780 = CARTESIAN_POINT('',(181.0879,-120.08185,1.585)); +#137781 = LINE('',#137782,#137783); +#137782 = CARTESIAN_POINT('',(181.0879,-120.4156,1.585)); +#137783 = VECTOR('',#137784,1.); +#137784 = DIRECTION('',(0.,1.,0.)); +#137785 = ORIENTED_EDGE('',*,*,#137786,.T.); +#137786 = EDGE_CURVE('',#137779,#137685,#137787,.T.); +#137787 = LINE('',#137788,#137789); +#137788 = CARTESIAN_POINT('',(181.0879,-120.08185,1.585)); +#137789 = VECTOR('',#137790,1.); +#137790 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#137791 = PLANE('',#137792); +#137792 = AXIS2_PLACEMENT_3D('',#137793,#137794,#137795); +#137793 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137794 = DIRECTION('',(0.,0.,1.)); +#137795 = DIRECTION('',(1.,0.,-0.)); +#137796 = SHELL_BASED_SURFACE_MODEL('',(#137797)); +#137797 = OPEN_SHELL('',(#137798)); +#137798 = ADVANCED_FACE('',(#137799),#137919,.T.); +#137799 = FACE_BOUND('',#137800,.F.); +#137800 = EDGE_LOOP('',(#137801,#137812,#137820,#137829,#137837,#137846, + #137854,#137863,#137871,#137880,#137888,#137897,#137905,#137913)); +#137801 = ORIENTED_EDGE('',*,*,#137802,.T.); +#137802 = EDGE_CURVE('',#137803,#137805,#137807,.T.); +#137803 = VERTEX_POINT('',#137804); +#137804 = CARTESIAN_POINT('',(123.396427,-119.542459,1.585)); +#137805 = VERTEX_POINT('',#137806); +#137806 = CARTESIAN_POINT('',(123.513095,-119.604819,1.585)); +#137807 = CIRCLE('',#137808,7.500000000003E-02); +#137808 = AXIS2_PLACEMENT_3D('',#137809,#137810,#137811); +#137809 = CARTESIAN_POINT('',(123.438095,-119.6048190655,1.585)); +#137810 = DIRECTION('',(0.,0.,-1.)); +#137811 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#137812 = ORIENTED_EDGE('',*,*,#137813,.T.); +#137813 = EDGE_CURVE('',#137805,#137814,#137816,.T.); +#137814 = VERTEX_POINT('',#137815); +#137815 = CARTESIAN_POINT('',(123.513095,-120.396637,1.585)); +#137816 = LINE('',#137817,#137818); +#137817 = CARTESIAN_POINT('',(123.513095,-119.604819,1.585)); +#137818 = VECTOR('',#137819,1.); +#137819 = DIRECTION('',(0.,-1.,0.)); +#137820 = ORIENTED_EDGE('',*,*,#137821,.T.); +#137821 = EDGE_CURVE('',#137814,#137822,#137824,.T.); +#137822 = VERTEX_POINT('',#137823); +#137823 = CARTESIAN_POINT('',(123.646276,-120.529819,1.585)); +#137824 = CIRCLE('',#137825,0.186867373533); +#137825 = AXIS2_PLACEMENT_3D('',#137826,#137827,#137828); +#137826 = CARTESIAN_POINT('',(123.69381471388,-120.349099643,1.585)); +#137827 = DIRECTION('',(0.,0.,1.)); +#137828 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#137829 = ORIENTED_EDGE('',*,*,#137830,.T.); +#137830 = EDGE_CURVE('',#137822,#137831,#137833,.T.); +#137831 = VERTEX_POINT('',#137832); +#137832 = CARTESIAN_POINT('',(123.801342,-120.529819,1.585)); +#137833 = LINE('',#137834,#137835); +#137834 = CARTESIAN_POINT('',(123.646276,-120.529819,1.585)); +#137835 = VECTOR('',#137836,1.); +#137836 = DIRECTION('',(1.,0.,0.)); +#137837 = ORIENTED_EDGE('',*,*,#137838,.T.); +#137838 = EDGE_CURVE('',#137831,#137839,#137841,.T.); +#137839 = VERTEX_POINT('',#137840); +#137840 = CARTESIAN_POINT('',(123.934523,-120.396637,1.585)); +#137841 = CIRCLE('',#137842,0.186867760544); +#137842 = AXIS2_PLACEMENT_3D('',#137843,#137844,#137845); +#137843 = CARTESIAN_POINT('',(123.75380296928,-120.3490993262,1.585)); +#137844 = DIRECTION('',(0.,0.,1.)); +#137845 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#137846 = ORIENTED_EDGE('',*,*,#137847,.T.); +#137847 = EDGE_CURVE('',#137839,#137848,#137850,.T.); +#137848 = VERTEX_POINT('',#137849); +#137849 = CARTESIAN_POINT('',(123.935964,-119.590187,1.585)); +#137850 = LINE('',#137851,#137852); +#137851 = CARTESIAN_POINT('',(123.934523,-120.396637,1.585)); +#137852 = VECTOR('',#137853,1.); +#137853 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#137854 = ORIENTED_EDGE('',*,*,#137855,.T.); +#137855 = EDGE_CURVE('',#137848,#137856,#137858,.T.); +#137856 = VERTEX_POINT('',#137857); +#137857 = CARTESIAN_POINT('',(124.084523,-119.604819,1.585)); +#137858 = CIRCLE('',#137859,7.500006711463E-02); +#137859 = AXIS2_PLACEMENT_3D('',#137860,#137861,#137862); +#137860 = CARTESIAN_POINT('',(124.00952293288,-119.6048189328,1.585)); +#137861 = DIRECTION('',(0.,0.,-1.)); +#137862 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#137863 = ORIENTED_EDGE('',*,*,#137864,.T.); +#137864 = EDGE_CURVE('',#137856,#137865,#137867,.T.); +#137865 = VERTEX_POINT('',#137866); +#137866 = CARTESIAN_POINT('',(124.08186,-120.434152,1.585)); +#137867 = LINE('',#137868,#137869); +#137868 = CARTESIAN_POINT('',(124.084523,-119.604819,1.585)); +#137869 = VECTOR('',#137870,1.); +#137870 = DIRECTION('',(-3.210997598703E-03,-0.999994844734,0.)); +#137871 = ORIENTED_EDGE('',*,*,#137872,.T.); +#137872 = EDGE_CURVE('',#137865,#137873,#137875,.T.); +#137873 = VERTEX_POINT('',#137874); +#137874 = CARTESIAN_POINT('',(123.833679,-120.678378,1.585)); +#137875 = CIRCLE('',#137876,0.348635327447); +#137876 = AXIS2_PLACEMENT_3D('',#137877,#137878,#137879); +#137877 = CARTESIAN_POINT('',(123.74590748129,-120.3409720841,1.585)); +#137878 = DIRECTION('',(0.,0.,-1.)); +#137879 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#137880 = ORIENTED_EDGE('',*,*,#137881,.T.); +#137881 = EDGE_CURVE('',#137873,#137882,#137884,.T.); +#137882 = VERTEX_POINT('',#137883); +#137883 = CARTESIAN_POINT('',(123.608761,-120.677156,1.585)); +#137884 = LINE('',#137885,#137886); +#137885 = CARTESIAN_POINT('',(123.833679,-120.678378,1.585)); +#137886 = VECTOR('',#137887,1.); +#137887 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#137888 = ORIENTED_EDGE('',*,*,#137889,.T.); +#137889 = EDGE_CURVE('',#137882,#137890,#137892,.T.); +#137890 = VERTEX_POINT('',#137891); +#137891 = CARTESIAN_POINT('',(123.364536,-120.428974,1.585)); +#137892 = CIRCLE('',#137893,0.348628446662); +#137893 = AXIS2_PLACEMENT_3D('',#137894,#137895,#137896); +#137894 = CARTESIAN_POINT('',(123.70193661322,-120.3412094284,1.585)); +#137895 = DIRECTION('',(0.,0.,-1.)); +#137896 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#137897 = ORIENTED_EDGE('',*,*,#137898,.T.); +#137898 = EDGE_CURVE('',#137890,#137899,#137901,.T.); +#137899 = VERTEX_POINT('',#137900); +#137900 = CARTESIAN_POINT('',(123.364536,-119.590187,1.585)); +#137901 = LINE('',#137902,#137903); +#137902 = CARTESIAN_POINT('',(123.364536,-120.428974,1.585)); +#137903 = VECTOR('',#137904,1.); +#137904 = DIRECTION('',(0.,1.,0.)); +#137905 = ORIENTED_EDGE('',*,*,#137906,.T.); +#137906 = EDGE_CURVE('',#137899,#137907,#137909,.T.); +#137907 = VERTEX_POINT('',#137908); +#137908 = CARTESIAN_POINT('',(123.375735,-119.563151,1.585)); +#137909 = LINE('',#137910,#137911); +#137910 = CARTESIAN_POINT('',(123.364536,-119.590187,1.585)); +#137911 = VECTOR('',#137912,1.); +#137912 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#137913 = ORIENTED_EDGE('',*,*,#137914,.T.); +#137914 = EDGE_CURVE('',#137907,#137803,#137915,.T.); +#137915 = LINE('',#137916,#137917); +#137916 = CARTESIAN_POINT('',(123.375735,-119.563151,1.585)); +#137917 = VECTOR('',#137918,1.); +#137918 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#137919 = PLANE('',#137920); +#137920 = AXIS2_PLACEMENT_3D('',#137921,#137922,#137923); +#137921 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137922 = DIRECTION('',(0.,0.,1.)); +#137923 = DIRECTION('',(1.,0.,-0.)); +#137924 = SHELL_BASED_SURFACE_MODEL('',(#137925)); +#137925 = OPEN_SHELL('',(#137926)); +#137926 = ADVANCED_FACE('',(#137927),#138113,.T.); +#137927 = FACE_BOUND('',#137928,.F.); +#137928 = EDGE_LOOP('',(#137929,#137940,#137948,#137957,#137965,#137973, + #137982,#137990,#137999,#138007,#138015,#138023,#138032,#138040, + #138049,#138057,#138066,#138074,#138082,#138090,#138099,#138107)); +#137929 = ORIENTED_EDGE('',*,*,#137930,.T.); +#137930 = EDGE_CURVE('',#137931,#137933,#137935,.T.); +#137931 = VERTEX_POINT('',#137932); +#137932 = CARTESIAN_POINT('',(124.375844,-119.678378,1.585)); +#137933 = VERTEX_POINT('',#137934); +#137934 = CARTESIAN_POINT('',(124.390476,-119.529819,1.585)); +#137935 = CIRCLE('',#137936,7.500006711464E-02); +#137936 = AXIS2_PLACEMENT_3D('',#137937,#137938,#137939); +#137937 = CARTESIAN_POINT('',(124.39047593288,-119.6048190671,1.585)); +#137938 = DIRECTION('',(0.,0.,-1.)); +#137939 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#137940 = ORIENTED_EDGE('',*,*,#137941,.T.); +#137941 = EDGE_CURVE('',#137933,#137942,#137944,.T.); +#137942 = VERTEX_POINT('',#137943); +#137943 = CARTESIAN_POINT('',(125.017261,-119.530581,1.585)); +#137944 = LINE('',#137945,#137946); +#137945 = CARTESIAN_POINT('',(124.390476,-119.529819,1.585)); +#137946 = VECTOR('',#137947,1.); +#137947 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#137948 = ORIENTED_EDGE('',*,*,#137949,.T.); +#137949 = EDGE_CURVE('',#137942,#137950,#137952,.T.); +#137950 = VERTEX_POINT('',#137951); +#137951 = CARTESIAN_POINT('',(125.083082,-119.619451,1.585)); +#137952 = CIRCLE('',#137953,7.447391611627E-02); +#137953 = AXIS2_PLACEMENT_3D('',#137954,#137955,#137956); +#137954 = CARTESIAN_POINT('',(125.01008192664,-119.6047080874,1.585)); +#137955 = DIRECTION('',(0.,0.,-1.)); +#137956 = DIRECTION('',(9.639715124831E-02,0.995342950561,0.)); +#137957 = ORIENTED_EDGE('',*,*,#137958,.T.); +#137958 = EDGE_CURVE('',#137950,#137959,#137961,.T.); +#137959 = VERTEX_POINT('',#137960); +#137960 = CARTESIAN_POINT('',(125.065966,-119.654207,1.585)); +#137961 = LINE('',#137962,#137963); +#137962 = CARTESIAN_POINT('',(125.083082,-119.619451,1.585)); +#137963 = VECTOR('',#137964,1.); +#137964 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#137965 = ORIENTED_EDGE('',*,*,#137966,.T.); +#137966 = EDGE_CURVE('',#137959,#137967,#137969,.T.); +#137967 = VERTEX_POINT('',#137968); +#137968 = CARTESIAN_POINT('',(124.83907,-119.913516,1.585)); +#137969 = LINE('',#137970,#137971); +#137970 = CARTESIAN_POINT('',(125.065966,-119.654207,1.585)); +#137971 = VECTOR('',#137972,1.); +#137972 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#137973 = ORIENTED_EDGE('',*,*,#137974,.T.); +#137974 = EDGE_CURVE('',#137967,#137975,#137977,.T.); +#137975 = VERTEX_POINT('',#137976); +#137976 = CARTESIAN_POINT('',(125.083082,-120.161615,1.585)); +#137977 = CIRCLE('',#137978,0.348520834816); +#137978 = AXIS2_PLACEMENT_3D('',#137979,#137980,#137981); +#137979 = CARTESIAN_POINT('',(124.7457766174,-120.2493181993,1.585)); +#137980 = DIRECTION('',(0.,0.,-1.)); +#137981 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#137982 = ORIENTED_EDGE('',*,*,#137983,.T.); +#137983 = EDGE_CURVE('',#137975,#137984,#137986,.T.); +#137984 = VERTEX_POINT('',#137985); +#137985 = CARTESIAN_POINT('',(125.08186,-120.434152,1.585)); +#137986 = LINE('',#137987,#137988); +#137987 = CARTESIAN_POINT('',(125.083082,-120.161615,1.585)); +#137988 = VECTOR('',#137989,1.); +#137989 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#137990 = ORIENTED_EDGE('',*,*,#137991,.T.); +#137991 = EDGE_CURVE('',#137984,#137992,#137994,.T.); +#137992 = VERTEX_POINT('',#137993); +#137993 = CARTESIAN_POINT('',(124.833679,-120.678378,1.585)); +#137994 = CIRCLE('',#137995,0.348635327447); +#137995 = AXIS2_PLACEMENT_3D('',#137996,#137997,#137998); +#137996 = CARTESIAN_POINT('',(124.74590748129,-120.3409720841,1.585)); +#137997 = DIRECTION('',(0.,0.,-1.)); +#137998 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#137999 = ORIENTED_EDGE('',*,*,#138000,.T.); +#138000 = EDGE_CURVE('',#137992,#138001,#138003,.T.); +#138001 = VERTEX_POINT('',#138002); +#138002 = CARTESIAN_POINT('',(124.513523,-120.677156,1.585)); +#138003 = LINE('',#138004,#138005); +#138004 = CARTESIAN_POINT('',(124.833679,-120.678378,1.585)); +#138005 = VECTOR('',#138006,1.); +#138006 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#138007 = ORIENTED_EDGE('',*,*,#138008,.T.); +#138008 = EDGE_CURVE('',#138001,#138009,#138011,.T.); +#138009 = VERTEX_POINT('',#138010); +#138010 = CARTESIAN_POINT('',(124.39081,-120.61495,1.585)); +#138011 = LINE('',#138012,#138013); +#138012 = CARTESIAN_POINT('',(124.513523,-120.677156,1.585)); +#138013 = VECTOR('',#138014,1.); +#138014 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#138015 = ORIENTED_EDGE('',*,*,#138016,.T.); +#138016 = EDGE_CURVE('',#138009,#138017,#138019,.T.); +#138017 = VERTEX_POINT('',#138018); +#138018 = CARTESIAN_POINT('',(124.328115,-120.551247,1.585)); +#138019 = LINE('',#138020,#138021); +#138020 = CARTESIAN_POINT('',(124.39081,-120.61495,1.585)); +#138021 = VECTOR('',#138022,1.); +#138022 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#138023 = ORIENTED_EDGE('',*,*,#138024,.T.); +#138024 = EDGE_CURVE('',#138017,#138025,#138027,.T.); +#138025 = VERTEX_POINT('',#138026); +#138026 = CARTESIAN_POINT('',(124.44351,-120.456548,1.585)); +#138027 = CIRCLE('',#138028,7.50001266804E-02); +#138028 = AXIS2_PLACEMENT_3D('',#138029,#138030,#138031); +#138029 = CARTESIAN_POINT('',(124.39047605199,-120.5095802483,1.585)); +#138030 = DIRECTION('',(0.,0.,-1.)); +#138031 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#138032 = ORIENTED_EDGE('',*,*,#138033,.T.); +#138033 = EDGE_CURVE('',#138025,#138034,#138036,.T.); +#138034 = VERTEX_POINT('',#138035); +#138035 = CARTESIAN_POINT('',(124.482522,-120.495561,1.585)); +#138036 = LINE('',#138037,#138038); +#138037 = CARTESIAN_POINT('',(124.44351,-120.456548,1.585)); +#138038 = VECTOR('',#138039,1.); +#138039 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#138040 = ORIENTED_EDGE('',*,*,#138041,.T.); +#138041 = EDGE_CURVE('',#138034,#138042,#138044,.T.); +#138042 = VERTEX_POINT('',#138043); +#138043 = CARTESIAN_POINT('',(124.869857,-120.495561,1.585)); +#138044 = CIRCLE('',#138045,0.358502380266); +#138045 = AXIS2_PLACEMENT_3D('',#138046,#138047,#138048); +#138046 = CARTESIAN_POINT('',(124.6761895,-120.193871,1.585)); +#138047 = DIRECTION('',(0.,0.,1.)); +#138048 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#138049 = ORIENTED_EDGE('',*,*,#138050,.T.); +#138050 = EDGE_CURVE('',#138042,#138051,#138053,.T.); +#138051 = VERTEX_POINT('',#138052); +#138052 = CARTESIAN_POINT('',(124.900264,-120.465153,1.585)); +#138053 = LINE('',#138054,#138055); +#138054 = CARTESIAN_POINT('',(124.869857,-120.495561,1.585)); +#138055 = VECTOR('',#138056,1.); +#138056 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#138057 = ORIENTED_EDGE('',*,*,#138058,.T.); +#138058 = EDGE_CURVE('',#138051,#138059,#138061,.T.); +#138059 = VERTEX_POINT('',#138060); +#138060 = CARTESIAN_POINT('',(124.900265,-120.125436,1.585)); +#138061 = CIRCLE('',#138062,0.305616146029); +#138062 = AXIS2_PLACEMENT_3D('',#138063,#138064,#138065); +#138063 = CARTESIAN_POINT('',(124.64619892049,-120.2952937521,1.585)); +#138064 = DIRECTION('',(0.,-0.,1.)); +#138065 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#138066 = ORIENTED_EDGE('',*,*,#138067,.T.); +#138067 = EDGE_CURVE('',#138059,#138068,#138070,.T.); +#138068 = VERTEX_POINT('',#138069); +#138069 = CARTESIAN_POINT('',(124.869858,-120.095029,1.585)); +#138070 = LINE('',#138071,#138072); +#138071 = CARTESIAN_POINT('',(124.900265,-120.125436,1.585)); +#138072 = VECTOR('',#138073,1.); +#138073 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#138074 = ORIENTED_EDGE('',*,*,#138075,.T.); +#138075 = EDGE_CURVE('',#138068,#138076,#138078,.T.); +#138076 = VERTEX_POINT('',#138077); +#138077 = CARTESIAN_POINT('',(124.801342,-120.060771,1.585)); +#138078 = LINE('',#138079,#138080); +#138079 = CARTESIAN_POINT('',(124.869858,-120.095029,1.585)); +#138080 = VECTOR('',#138081,1.); +#138081 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#138082 = ORIENTED_EDGE('',*,*,#138083,.T.); +#138083 = EDGE_CURVE('',#138076,#138084,#138086,.T.); +#138084 = VERTEX_POINT('',#138085); +#138085 = CARTESIAN_POINT('',(124.661558,-120.05933,1.585)); +#138086 = LINE('',#138087,#138088); +#138087 = CARTESIAN_POINT('',(124.801342,-120.060771,1.585)); +#138088 = VECTOR('',#138089,1.); +#138089 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#138090 = ORIENTED_EDGE('',*,*,#138091,.T.); +#138091 = EDGE_CURVE('',#138084,#138092,#138094,.T.); +#138092 = VERTEX_POINT('',#138093); +#138093 = CARTESIAN_POINT('',(124.619747,-119.936383,1.585)); +#138094 = CIRCLE('',#138095,7.500015628755E-02); +#138095 = AXIS2_PLACEMENT_3D('',#138096,#138097,#138098); +#138096 = CARTESIAN_POINT('',(124.67619028432,-119.9857710461,1.585)); +#138097 = DIRECTION('',(0.,0.,-1.)); +#138098 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#138099 = ORIENTED_EDGE('',*,*,#138100,.T.); +#138100 = EDGE_CURVE('',#138092,#138101,#138103,.T.); +#138101 = VERTEX_POINT('',#138102); +#138102 = CARTESIAN_POINT('',(124.844241,-119.679819,1.585)); +#138103 = LINE('',#138104,#138105); +#138104 = CARTESIAN_POINT('',(124.619747,-119.936383,1.585)); +#138105 = VECTOR('',#138106,1.); +#138106 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#138107 = ORIENTED_EDGE('',*,*,#138108,.T.); +#138108 = EDGE_CURVE('',#138101,#137931,#138109,.T.); +#138109 = LINE('',#138110,#138111); +#138110 = CARTESIAN_POINT('',(124.844241,-119.679819,1.585)); +#138111 = VECTOR('',#138112,1.); +#138112 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#138113 = PLANE('',#138114); +#138114 = AXIS2_PLACEMENT_3D('',#138115,#138116,#138117); +#138115 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138116 = DIRECTION('',(0.,0.,1.)); +#138117 = DIRECTION('',(1.,0.,-0.)); +#138118 = SHELL_BASED_SURFACE_MODEL('',(#138119)); +#138119 = OPEN_SHELL('',(#138120)); +#138120 = ADVANCED_FACE('',(#138121),#138255,.T.); +#138121 = FACE_BOUND('',#138122,.F.); +#138122 = EDGE_LOOP('',(#138123,#138134,#138142,#138151,#138159,#138167, + #138175,#138183,#138192,#138200,#138208,#138216,#138225,#138233, + #138241,#138249)); +#138123 = ORIENTED_EDGE('',*,*,#138124,.T.); +#138124 = EDGE_CURVE('',#138125,#138127,#138129,.T.); +#138125 = VERTEX_POINT('',#138126); +#138126 = CARTESIAN_POINT('',(207.054801,-119.701216,1.585)); +#138127 = VERTEX_POINT('',#138128); +#138128 = CARTESIAN_POINT('',(207.171469,-119.763576,1.585)); +#138129 = CIRCLE('',#138130,7.500000000002E-02); +#138130 = AXIS2_PLACEMENT_3D('',#138131,#138132,#138133); +#138131 = CARTESIAN_POINT('',(207.096469,-119.7635760655,1.585)); +#138132 = DIRECTION('',(0.,0.,-1.)); +#138133 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#138134 = ORIENTED_EDGE('',*,*,#138135,.T.); +#138135 = EDGE_CURVE('',#138127,#138136,#138138,.T.); +#138136 = VERTEX_POINT('',#138137); +#138137 = CARTESIAN_POINT('',(207.170028,-120.349636,1.585)); +#138138 = LINE('',#138139,#138140); +#138139 = CARTESIAN_POINT('',(207.171469,-119.763576,1.585)); +#138140 = VECTOR('',#138141,1.); +#138141 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#138142 = ORIENTED_EDGE('',*,*,#138143,.T.); +#138143 = EDGE_CURVE('',#138136,#138144,#138146,.T.); +#138144 = VERTEX_POINT('',#138145); +#138145 = CARTESIAN_POINT('',(207.021469,-120.335004,1.585)); +#138146 = CIRCLE('',#138147,7.500006711464E-02); +#138147 = AXIS2_PLACEMENT_3D('',#138148,#138149,#138150); +#138148 = CARTESIAN_POINT('',(207.09646906711,-120.3350040671,1.585)); +#138149 = DIRECTION('',(-0.,0.,-1.)); +#138150 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#138151 = ORIENTED_EDGE('',*,*,#138152,.T.); +#138152 = EDGE_CURVE('',#138144,#138153,#138155,.T.); +#138153 = VERTEX_POINT('',#138154); +#138154 = CARTESIAN_POINT('',(207.021469,-120.12429,1.585)); +#138155 = LINE('',#138156,#138157); +#138156 = CARTESIAN_POINT('',(207.021469,-120.335004,1.585)); +#138157 = VECTOR('',#138158,1.); +#138158 = DIRECTION('',(0.,1.,0.)); +#138159 = ORIENTED_EDGE('',*,*,#138160,.T.); +#138160 = EDGE_CURVE('',#138153,#138161,#138163,.T.); +#138161 = VERTEX_POINT('',#138162); +#138162 = CARTESIAN_POINT('',(206.325154,-120.12429,1.585)); +#138163 = LINE('',#138164,#138165); +#138164 = CARTESIAN_POINT('',(207.021469,-120.12429,1.585)); +#138165 = VECTOR('',#138166,1.); +#138166 = DIRECTION('',(-1.,0.,0.)); +#138167 = ORIENTED_EDGE('',*,*,#138168,.T.); +#138168 = EDGE_CURVE('',#138161,#138169,#138171,.T.); +#138169 = VERTEX_POINT('',#138170); +#138170 = CARTESIAN_POINT('',(206.397683,-120.19993,1.585)); +#138171 = LINE('',#138172,#138173); +#138172 = CARTESIAN_POINT('',(206.325154,-120.12429,1.585)); +#138173 = VECTOR('',#138174,1.); +#138174 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#138175 = ORIENTED_EDGE('',*,*,#138176,.T.); +#138176 = EDGE_CURVE('',#138169,#138177,#138179,.T.); +#138177 = VERTEX_POINT('',#138178); +#138178 = CARTESIAN_POINT('',(206.45452,-120.315194,1.585)); +#138179 = LINE('',#138180,#138181); +#138180 = CARTESIAN_POINT('',(206.397683,-120.19993,1.585)); +#138181 = VECTOR('',#138182,1.); +#138182 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#138183 = ORIENTED_EDGE('',*,*,#138184,.T.); +#138184 = EDGE_CURVE('',#138177,#138185,#138187,.T.); +#138185 = VERTEX_POINT('',#138186); +#138186 = CARTESIAN_POINT('',(206.315101,-120.368545,1.585)); +#138187 = CIRCLE('',#138188,7.500029440469E-02); +#138188 = AXIS2_PLACEMENT_3D('',#138189,#138190,#138191); +#138189 = CARTESIAN_POINT('',(206.38218305397,-120.3350033513,1.585)); +#138190 = DIRECTION('',(0.,0.,-1.)); +#138191 = DIRECTION('',(0.964488827732,0.264123647521,0.)); +#138192 = ORIENTED_EDGE('',*,*,#138193,.T.); +#138193 = EDGE_CURVE('',#138185,#138194,#138196,.T.); +#138194 = VERTEX_POINT('',#138195); +#138195 = CARTESIAN_POINT('',(206.272925,-120.284193,1.585)); +#138196 = LINE('',#138197,#138198); +#138197 = CARTESIAN_POINT('',(206.315101,-120.368545,1.585)); +#138198 = VECTOR('',#138199,1.); +#138199 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#138200 = ORIENTED_EDGE('',*,*,#138201,.T.); +#138201 = EDGE_CURVE('',#138194,#138202,#138204,.T.); +#138202 = VERTEX_POINT('',#138203); +#138203 = CARTESIAN_POINT('',(206.191544,-120.202812,1.585)); +#138204 = LINE('',#138205,#138206); +#138205 = CARTESIAN_POINT('',(206.272925,-120.284193,1.585)); +#138206 = VECTOR('',#138207,1.); +#138207 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#138208 = ORIENTED_EDGE('',*,*,#138209,.T.); +#138209 = EDGE_CURVE('',#138202,#138210,#138212,.T.); +#138210 = VERTEX_POINT('',#138211); +#138211 = CARTESIAN_POINT('',(206.043491,-120.102378,1.585)); +#138212 = LINE('',#138213,#138214); +#138213 = CARTESIAN_POINT('',(206.191544,-120.202812,1.585)); +#138214 = VECTOR('',#138215,1.); +#138215 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#138216 = ORIENTED_EDGE('',*,*,#138217,.T.); +#138217 = EDGE_CURVE('',#138210,#138218,#138220,.T.); +#138218 = VERTEX_POINT('',#138219); +#138219 = CARTESIAN_POINT('',(206.096469,-119.97429,1.585)); +#138220 = CIRCLE('',#138221,7.49999375171E-02); +#138221 = AXIS2_PLACEMENT_3D('',#138222,#138223,#138224); +#138222 = CARTESIAN_POINT('',(206.09646880902,-120.0492899375,1.585)); +#138223 = DIRECTION('',(0.,0.,-1.)); +#138224 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#138225 = ORIENTED_EDGE('',*,*,#138226,.T.); +#138226 = EDGE_CURVE('',#138218,#138227,#138229,.T.); +#138227 = VERTEX_POINT('',#138228); +#138228 = CARTESIAN_POINT('',(207.021469,-119.97429,1.585)); +#138229 = LINE('',#138230,#138231); +#138230 = CARTESIAN_POINT('',(206.096469,-119.97429,1.585)); +#138231 = VECTOR('',#138232,1.); +#138232 = DIRECTION('',(1.,0.,0.)); +#138233 = ORIENTED_EDGE('',*,*,#138234,.T.); +#138234 = EDGE_CURVE('',#138227,#138235,#138237,.T.); +#138235 = VERTEX_POINT('',#138236); +#138236 = CARTESIAN_POINT('',(207.02291,-119.748944,1.585)); +#138237 = LINE('',#138238,#138239); +#138238 = CARTESIAN_POINT('',(207.021469,-119.97429,1.585)); +#138239 = VECTOR('',#138240,1.); +#138240 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#138241 = ORIENTED_EDGE('',*,*,#138242,.T.); +#138242 = EDGE_CURVE('',#138235,#138243,#138245,.T.); +#138243 = VERTEX_POINT('',#138244); +#138244 = CARTESIAN_POINT('',(207.034109,-119.721908,1.585)); +#138245 = LINE('',#138246,#138247); +#138246 = CARTESIAN_POINT('',(207.02291,-119.748944,1.585)); +#138247 = VECTOR('',#138248,1.); +#138248 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#138249 = ORIENTED_EDGE('',*,*,#138250,.T.); +#138250 = EDGE_CURVE('',#138243,#138125,#138251,.T.); +#138251 = LINE('',#138252,#138253); +#138252 = CARTESIAN_POINT('',(207.034109,-119.721908,1.585)); +#138253 = VECTOR('',#138254,1.); +#138254 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#138255 = PLANE('',#138256); +#138256 = AXIS2_PLACEMENT_3D('',#138257,#138258,#138259); +#138257 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138258 = DIRECTION('',(0.,0.,1.)); +#138259 = DIRECTION('',(1.,0.,-0.)); +#138260 = SHELL_BASED_SURFACE_MODEL('',(#138261)); +#138261 = OPEN_SHELL('',(#138262)); +#138262 = ADVANCED_FACE('',(#138263),#138383,.T.); +#138263 = FACE_BOUND('',#138264,.F.); +#138264 = EDGE_LOOP('',(#138265,#138276,#138284,#138293,#138301,#138310, + #138318,#138327,#138335,#138344,#138352,#138361,#138369,#138377)); +#138265 = ORIENTED_EDGE('',*,*,#138266,.T.); +#138266 = EDGE_CURVE('',#138267,#138269,#138271,.T.); +#138267 = VERTEX_POINT('',#138268); +#138268 = CARTESIAN_POINT('',(129.566427,-118.942459,1.585)); +#138269 = VERTEX_POINT('',#138270); +#138270 = CARTESIAN_POINT('',(129.683095,-119.004819,1.585)); +#138271 = CIRCLE('',#138272,7.500000000003E-02); +#138272 = AXIS2_PLACEMENT_3D('',#138273,#138274,#138275); +#138273 = CARTESIAN_POINT('',(129.608095,-119.0048190655,1.585)); +#138274 = DIRECTION('',(0.,0.,-1.)); +#138275 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#138276 = ORIENTED_EDGE('',*,*,#138277,.T.); +#138277 = EDGE_CURVE('',#138269,#138278,#138280,.T.); +#138278 = VERTEX_POINT('',#138279); +#138279 = CARTESIAN_POINT('',(129.683095,-119.796637,1.585)); +#138280 = LINE('',#138281,#138282); +#138281 = CARTESIAN_POINT('',(129.683095,-119.004819,1.585)); +#138282 = VECTOR('',#138283,1.); +#138283 = DIRECTION('',(0.,-1.,0.)); +#138284 = ORIENTED_EDGE('',*,*,#138285,.T.); +#138285 = EDGE_CURVE('',#138278,#138286,#138288,.T.); +#138286 = VERTEX_POINT('',#138287); +#138287 = CARTESIAN_POINT('',(129.816276,-119.929819,1.585)); +#138288 = CIRCLE('',#138289,0.186867373533); +#138289 = AXIS2_PLACEMENT_3D('',#138290,#138291,#138292); +#138290 = CARTESIAN_POINT('',(129.86381471388,-119.749099643,1.585)); +#138291 = DIRECTION('',(0.,0.,1.)); +#138292 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#138293 = ORIENTED_EDGE('',*,*,#138294,.T.); +#138294 = EDGE_CURVE('',#138286,#138295,#138297,.T.); +#138295 = VERTEX_POINT('',#138296); +#138296 = CARTESIAN_POINT('',(129.971342,-119.929819,1.585)); +#138297 = LINE('',#138298,#138299); +#138298 = CARTESIAN_POINT('',(129.816276,-119.929819,1.585)); +#138299 = VECTOR('',#138300,1.); +#138300 = DIRECTION('',(1.,0.,0.)); +#138301 = ORIENTED_EDGE('',*,*,#138302,.T.); +#138302 = EDGE_CURVE('',#138295,#138303,#138305,.T.); +#138303 = VERTEX_POINT('',#138304); +#138304 = CARTESIAN_POINT('',(130.104523,-119.796637,1.585)); +#138305 = CIRCLE('',#138306,0.186867760543); +#138306 = AXIS2_PLACEMENT_3D('',#138307,#138308,#138309); +#138307 = CARTESIAN_POINT('',(129.92380296928,-119.7490993262,1.585)); +#138308 = DIRECTION('',(0.,0.,1.)); +#138309 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#138310 = ORIENTED_EDGE('',*,*,#138311,.T.); +#138311 = EDGE_CURVE('',#138303,#138312,#138314,.T.); +#138312 = VERTEX_POINT('',#138313); +#138313 = CARTESIAN_POINT('',(130.105964,-118.990187,1.585)); +#138314 = LINE('',#138315,#138316); +#138315 = CARTESIAN_POINT('',(130.104523,-119.796637,1.585)); +#138316 = VECTOR('',#138317,1.); +#138317 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#138318 = ORIENTED_EDGE('',*,*,#138319,.T.); +#138319 = EDGE_CURVE('',#138312,#138320,#138322,.T.); +#138320 = VERTEX_POINT('',#138321); +#138321 = CARTESIAN_POINT('',(130.254523,-119.004819,1.585)); +#138322 = CIRCLE('',#138323,7.500006711464E-02); +#138323 = AXIS2_PLACEMENT_3D('',#138324,#138325,#138326); +#138324 = CARTESIAN_POINT('',(130.17952293288,-119.0048189328,1.585)); +#138325 = DIRECTION('',(0.,0.,-1.)); +#138326 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#138327 = ORIENTED_EDGE('',*,*,#138328,.T.); +#138328 = EDGE_CURVE('',#138320,#138329,#138331,.T.); +#138329 = VERTEX_POINT('',#138330); +#138330 = CARTESIAN_POINT('',(130.25186,-119.834152,1.585)); +#138331 = LINE('',#138332,#138333); +#138332 = CARTESIAN_POINT('',(130.254523,-119.004819,1.585)); +#138333 = VECTOR('',#138334,1.); +#138334 = DIRECTION('',(-3.21099759872E-03,-0.999994844734,0.)); +#138335 = ORIENTED_EDGE('',*,*,#138336,.T.); +#138336 = EDGE_CURVE('',#138329,#138337,#138339,.T.); +#138337 = VERTEX_POINT('',#138338); +#138338 = CARTESIAN_POINT('',(130.003679,-120.078378,1.585)); +#138339 = CIRCLE('',#138340,0.348635327447); +#138340 = AXIS2_PLACEMENT_3D('',#138341,#138342,#138343); +#138341 = CARTESIAN_POINT('',(129.91590748129,-119.7409720841,1.585)); +#138342 = DIRECTION('',(0.,0.,-1.)); +#138343 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#138344 = ORIENTED_EDGE('',*,*,#138345,.T.); +#138345 = EDGE_CURVE('',#138337,#138346,#138348,.T.); +#138346 = VERTEX_POINT('',#138347); +#138347 = CARTESIAN_POINT('',(129.778761,-120.077156,1.585)); +#138348 = LINE('',#138349,#138350); +#138349 = CARTESIAN_POINT('',(130.003679,-120.078378,1.585)); +#138350 = VECTOR('',#138351,1.); +#138351 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#138352 = ORIENTED_EDGE('',*,*,#138353,.T.); +#138353 = EDGE_CURVE('',#138346,#138354,#138356,.T.); +#138354 = VERTEX_POINT('',#138355); +#138355 = CARTESIAN_POINT('',(129.534536,-119.828974,1.585)); +#138356 = CIRCLE('',#138357,0.348628446662); +#138357 = AXIS2_PLACEMENT_3D('',#138358,#138359,#138360); +#138358 = CARTESIAN_POINT('',(129.87193661322,-119.7412094284,1.585)); +#138359 = DIRECTION('',(0.,0.,-1.)); +#138360 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#138361 = ORIENTED_EDGE('',*,*,#138362,.T.); +#138362 = EDGE_CURVE('',#138354,#138363,#138365,.T.); +#138363 = VERTEX_POINT('',#138364); +#138364 = CARTESIAN_POINT('',(129.534536,-118.990187,1.585)); +#138365 = LINE('',#138366,#138367); +#138366 = CARTESIAN_POINT('',(129.534536,-119.828974,1.585)); +#138367 = VECTOR('',#138368,1.); +#138368 = DIRECTION('',(0.,1.,0.)); +#138369 = ORIENTED_EDGE('',*,*,#138370,.T.); +#138370 = EDGE_CURVE('',#138363,#138371,#138373,.T.); +#138371 = VERTEX_POINT('',#138372); +#138372 = CARTESIAN_POINT('',(129.545735,-118.963151,1.585)); +#138373 = LINE('',#138374,#138375); +#138374 = CARTESIAN_POINT('',(129.534536,-118.990187,1.585)); +#138375 = VECTOR('',#138376,1.); +#138376 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#138377 = ORIENTED_EDGE('',*,*,#138378,.T.); +#138378 = EDGE_CURVE('',#138371,#138267,#138379,.T.); +#138379 = LINE('',#138380,#138381); +#138380 = CARTESIAN_POINT('',(129.545735,-118.963151,1.585)); +#138381 = VECTOR('',#138382,1.); +#138382 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#138383 = PLANE('',#138384); +#138384 = AXIS2_PLACEMENT_3D('',#138385,#138386,#138387); +#138385 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138386 = DIRECTION('',(0.,0.,1.)); +#138387 = DIRECTION('',(1.,0.,-0.)); +#138388 = SHELL_BASED_SURFACE_MODEL('',(#138389)); +#138389 = OPEN_SHELL('',(#138390)); +#138390 = ADVANCED_FACE('',(#138391),#138526,.T.); +#138391 = FACE_BOUND('',#138392,.F.); +#138392 = EDGE_LOOP('',(#138393,#138404,#138412,#138420,#138428,#138437, + #138445,#138453,#138462,#138470,#138478,#138487,#138495,#138503, + #138512,#138520)); +#138393 = ORIENTED_EDGE('',*,*,#138394,.T.); +#138394 = EDGE_CURVE('',#138395,#138397,#138399,.T.); +#138395 = VERTEX_POINT('',#138396); +#138396 = CARTESIAN_POINT('',(130.800207,-118.897951,1.585)); +#138397 = VERTEX_POINT('',#138398); +#138398 = CARTESIAN_POINT('',(130.917341,-118.980918,1.585)); +#138399 = CIRCLE('',#138400,7.499955990671E-02); +#138400 = AXIS2_PLACEMENT_3D('',#138401,#138402,#138403); +#138401 = CARTESIAN_POINT('',(130.84619050095,-118.9572000643,1.585)); +#138402 = DIRECTION('',(0.,0.,-1.)); +#138403 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#138404 = ORIENTED_EDGE('',*,*,#138405,.T.); +#138405 = EDGE_CURVE('',#138397,#138406,#138408,.T.); +#138406 = VERTEX_POINT('',#138407); +#138407 = CARTESIAN_POINT('',(130.712152,-119.596485,1.585)); +#138408 = LINE('',#138409,#138410); +#138409 = CARTESIAN_POINT('',(130.917341,-118.980918,1.585)); +#138410 = VECTOR('',#138411,1.); +#138411 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#138412 = ORIENTED_EDGE('',*,*,#138413,.T.); +#138413 = EDGE_CURVE('',#138406,#138414,#138416,.T.); +#138414 = VERTEX_POINT('',#138415); +#138415 = CARTESIAN_POINT('',(131.009285,-119.596485,1.585)); +#138416 = LINE('',#138417,#138418); +#138417 = CARTESIAN_POINT('',(130.712152,-119.596485,1.585)); +#138418 = VECTOR('',#138419,1.); +#138419 = DIRECTION('',(1.,0.,0.)); +#138420 = ORIENTED_EDGE('',*,*,#138421,.T.); +#138421 = EDGE_CURVE('',#138414,#138422,#138424,.T.); +#138422 = VERTEX_POINT('',#138423); +#138423 = CARTESIAN_POINT('',(131.010726,-119.32352,1.585)); +#138424 = LINE('',#138425,#138426); +#138425 = CARTESIAN_POINT('',(131.009285,-119.596485,1.585)); +#138426 = VECTOR('',#138427,1.); +#138427 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#138428 = ORIENTED_EDGE('',*,*,#138429,.T.); +#138429 = EDGE_CURVE('',#138422,#138430,#138432,.T.); +#138430 = VERTEX_POINT('',#138431); +#138431 = CARTESIAN_POINT('',(131.159285,-119.338152,1.585)); +#138432 = CIRCLE('',#138433,7.500006711464E-02); +#138433 = AXIS2_PLACEMENT_3D('',#138434,#138435,#138436); +#138434 = CARTESIAN_POINT('',(131.08428493288,-119.3381519328,1.585)); +#138435 = DIRECTION('',(0.,0.,-1.)); +#138436 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#138437 = ORIENTED_EDGE('',*,*,#138438,.T.); +#138438 = EDGE_CURVE('',#138430,#138439,#138441,.T.); +#138439 = VERTEX_POINT('',#138440); +#138440 = CARTESIAN_POINT('',(131.159285,-119.596485,1.585)); +#138441 = LINE('',#138442,#138443); +#138442 = CARTESIAN_POINT('',(131.159285,-119.338152,1.585)); +#138443 = VECTOR('',#138444,1.); +#138444 = DIRECTION('',(0.,-1.,0.)); +#138445 = ORIENTED_EDGE('',*,*,#138446,.T.); +#138446 = EDGE_CURVE('',#138439,#138447,#138449,.T.); +#138447 = VERTEX_POINT('',#138448); +#138448 = CARTESIAN_POINT('',(131.241774,-119.597926,1.585)); +#138449 = LINE('',#138450,#138451); +#138450 = CARTESIAN_POINT('',(131.159285,-119.596485,1.585)); +#138451 = VECTOR('',#138452,1.); +#138452 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#138453 = ORIENTED_EDGE('',*,*,#138454,.T.); +#138454 = EDGE_CURVE('',#138447,#138455,#138457,.T.); +#138455 = VERTEX_POINT('',#138456); +#138456 = CARTESIAN_POINT('',(131.227142,-119.746485,1.585)); +#138457 = CIRCLE('',#138458,7.500006711465E-02); +#138458 = AXIS2_PLACEMENT_3D('',#138459,#138460,#138461); +#138459 = CARTESIAN_POINT('',(131.22714206711,-119.6714849328,1.585)); +#138460 = DIRECTION('',(0.,0.,-1.)); +#138461 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#138462 = ORIENTED_EDGE('',*,*,#138463,.T.); +#138463 = EDGE_CURVE('',#138455,#138464,#138466,.T.); +#138464 = VERTEX_POINT('',#138465); +#138465 = CARTESIAN_POINT('',(131.159285,-119.746485,1.585)); +#138466 = LINE('',#138467,#138468); +#138467 = CARTESIAN_POINT('',(131.227142,-119.746485,1.585)); +#138468 = VECTOR('',#138469,1.); +#138469 = DIRECTION('',(-1.,0.,0.)); +#138470 = ORIENTED_EDGE('',*,*,#138471,.T.); +#138471 = EDGE_CURVE('',#138464,#138472,#138474,.T.); +#138472 = VERTEX_POINT('',#138473); +#138473 = CARTESIAN_POINT('',(131.157844,-120.019451,1.585)); +#138474 = LINE('',#138475,#138476); +#138475 = CARTESIAN_POINT('',(131.159285,-119.746485,1.585)); +#138476 = VECTOR('',#138477,1.); +#138477 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#138478 = ORIENTED_EDGE('',*,*,#138479,.T.); +#138479 = EDGE_CURVE('',#138472,#138480,#138482,.T.); +#138480 = VERTEX_POINT('',#138481); +#138481 = CARTESIAN_POINT('',(131.009285,-120.004819,1.585)); +#138482 = CIRCLE('',#138483,7.500006711464E-02); +#138483 = AXIS2_PLACEMENT_3D('',#138484,#138485,#138486); +#138484 = CARTESIAN_POINT('',(131.08428506711,-120.0048190671,1.585)); +#138485 = DIRECTION('',(-0.,0.,-1.)); +#138486 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#138487 = ORIENTED_EDGE('',*,*,#138488,.T.); +#138488 = EDGE_CURVE('',#138480,#138489,#138491,.T.); +#138489 = VERTEX_POINT('',#138490); +#138490 = CARTESIAN_POINT('',(131.009285,-119.746485,1.585)); +#138491 = LINE('',#138492,#138493); +#138492 = CARTESIAN_POINT('',(131.009285,-120.004819,1.585)); +#138493 = VECTOR('',#138494,1.); +#138494 = DIRECTION('',(0.,1.,0.)); +#138495 = ORIENTED_EDGE('',*,*,#138496,.T.); +#138496 = EDGE_CURVE('',#138489,#138497,#138499,.T.); +#138497 = VERTEX_POINT('',#138498); +#138498 = CARTESIAN_POINT('',(130.593463,-119.745044,1.585)); +#138499 = LINE('',#138500,#138501); +#138500 = CARTESIAN_POINT('',(131.009285,-119.746485,1.585)); +#138501 = VECTOR('',#138502,1.); +#138502 = DIRECTION('',(-0.999993995468,3.465404301562E-03,0.)); +#138503 = ORIENTED_EDGE('',*,*,#138504,.T.); +#138504 = EDGE_CURVE('',#138497,#138505,#138507,.T.); +#138505 = VERTEX_POINT('',#138506); +#138506 = CARTESIAN_POINT('',(130.536944,-119.647768,1.585)); +#138507 = CIRCLE('',#138508,7.499997045036E-02); +#138508 = AXIS2_PLACEMENT_3D('',#138509,#138510,#138511); +#138509 = CARTESIAN_POINT('',(130.60809517257,-119.6714852133,1.585)); +#138510 = DIRECTION('',(0.,0.,-1.)); +#138511 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#138512 = ORIENTED_EDGE('',*,*,#138513,.T.); +#138513 = EDGE_CURVE('',#138505,#138514,#138516,.T.); +#138514 = VERTEX_POINT('',#138515); +#138515 = CARTESIAN_POINT('',(130.781033,-118.920058,1.585)); +#138516 = LINE('',#138517,#138518); +#138517 = CARTESIAN_POINT('',(130.536944,-119.647768,1.585)); +#138518 = VECTOR('',#138519,1.); +#138519 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#138520 = ORIENTED_EDGE('',*,*,#138521,.T.); +#138521 = EDGE_CURVE('',#138514,#138395,#138522,.T.); +#138522 = LINE('',#138523,#138524); +#138523 = CARTESIAN_POINT('',(130.781033,-118.920058,1.585)); +#138524 = VECTOR('',#138525,1.); +#138525 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#138526 = PLANE('',#138527); +#138527 = AXIS2_PLACEMENT_3D('',#138528,#138529,#138530); +#138528 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138529 = DIRECTION('',(0.,0.,1.)); +#138530 = DIRECTION('',(1.,0.,-0.)); +#138531 = SHELL_BASED_SURFACE_MODEL('',(#138532)); +#138532 = OPEN_SHELL('',(#138533)); +#138533 = ADVANCED_FACE('',(#138534,#138721),#138823,.T.); +#138534 = FACE_BOUND('',#138535,.F.); +#138535 = EDGE_LOOP('',(#138536,#138546,#138554,#138562,#138570,#138578, + #138586,#138594,#138602,#138610,#138618,#138626,#138634,#138642, + #138650,#138659,#138667,#138675,#138683,#138691,#138699,#138707, + #138715)); +#138536 = ORIENTED_EDGE('',*,*,#138537,.T.); +#138537 = EDGE_CURVE('',#138538,#138540,#138542,.T.); +#138538 = VERTEX_POINT('',#138539); +#138539 = CARTESIAN_POINT('',(82.877073,-118.525279,1.585)); +#138540 = VERTEX_POINT('',#138541); +#138541 = CARTESIAN_POINT('',(83.168409,-118.381516,1.585)); +#138542 = LINE('',#138543,#138544); +#138543 = CARTESIAN_POINT('',(82.877073,-118.525279,1.585)); +#138544 = VECTOR('',#138545,1.); +#138545 = DIRECTION('',(0.89676039911,0.442516425218,0.)); +#138546 = ORIENTED_EDGE('',*,*,#138547,.T.); +#138547 = EDGE_CURVE('',#138540,#138548,#138550,.T.); +#138548 = VERTEX_POINT('',#138549); +#138549 = CARTESIAN_POINT('',(83.695975,-118.252558,1.585)); +#138550 = LINE('',#138551,#138552); +#138551 = CARTESIAN_POINT('',(83.168409,-118.381516,1.585)); +#138552 = VECTOR('',#138553,1.); +#138553 = DIRECTION('',(0.971400101305,0.23744861167,0.)); +#138554 = ORIENTED_EDGE('',*,*,#138555,.T.); +#138555 = EDGE_CURVE('',#138548,#138556,#138558,.T.); +#138556 = VERTEX_POINT('',#138557); +#138557 = CARTESIAN_POINT('',(84.327417,-118.252883,1.585)); +#138558 = LINE('',#138559,#138560); +#138559 = CARTESIAN_POINT('',(83.695975,-118.252558,1.585)); +#138560 = VECTOR('',#138561,1.); +#138561 = DIRECTION('',(0.999999867545,-5.146948681837E-04,0.)); +#138562 = ORIENTED_EDGE('',*,*,#138563,.T.); +#138563 = EDGE_CURVE('',#138556,#138564,#138566,.T.); +#138564 = VERTEX_POINT('',#138565); +#138565 = CARTESIAN_POINT('',(84.358694,-118.25686,1.585)); +#138566 = LINE('',#138567,#138568); +#138567 = CARTESIAN_POINT('',(84.327417,-118.252883,1.585)); +#138568 = VECTOR('',#138569,1.); +#138569 = DIRECTION('',(0.992012638826,-0.126138512793,0.)); +#138570 = ORIENTED_EDGE('',*,*,#138571,.T.); +#138571 = EDGE_CURVE('',#138564,#138572,#138574,.T.); +#138572 = VERTEX_POINT('',#138573); +#138573 = CARTESIAN_POINT('',(84.881624,-118.390562,1.585)); +#138574 = LINE('',#138575,#138576); +#138575 = CARTESIAN_POINT('',(84.358694,-118.25686,1.585)); +#138576 = VECTOR('',#138577,1.); +#138577 = DIRECTION('',(0.968834186972,-0.247710149478,0.)); +#138578 = ORIENTED_EDGE('',*,*,#138579,.T.); +#138579 = EDGE_CURVE('',#138572,#138580,#138582,.T.); +#138580 = VERTEX_POINT('',#138581); +#138581 = CARTESIAN_POINT('',(85.157139,-118.531501,1.585)); +#138582 = LINE('',#138583,#138584); +#138583 = CARTESIAN_POINT('',(84.881624,-118.390562,1.585)); +#138584 = VECTOR('',#138585,1.); +#138585 = DIRECTION('',(0.890277200114,-0.455419045449,0.)); +#138586 = ORIENTED_EDGE('',*,*,#138587,.T.); +#138587 = EDGE_CURVE('',#138580,#138588,#138590,.T.); +#138588 = VERTEX_POINT('',#138589); +#138589 = CARTESIAN_POINT('',(85.313701,-118.690473,1.585)); +#138590 = LINE('',#138591,#138592); +#138591 = CARTESIAN_POINT('',(85.157139,-118.531501,1.585)); +#138592 = VECTOR('',#138593,1.); +#138593 = DIRECTION('',(0.701685542004,-0.712486771908,0.)); +#138594 = ORIENTED_EDGE('',*,*,#138595,.T.); +#138595 = EDGE_CURVE('',#138588,#138596,#138598,.T.); +#138596 = VERTEX_POINT('',#138597); +#138597 = CARTESIAN_POINT('',(85.457464,-118.981809,1.585)); +#138598 = LINE('',#138599,#138600); +#138599 = CARTESIAN_POINT('',(85.313701,-118.690473,1.585)); +#138600 = VECTOR('',#138601,1.); +#138601 = DIRECTION('',(0.442516425218,-0.89676039911,0.)); +#138602 = ORIENTED_EDGE('',*,*,#138603,.T.); +#138603 = EDGE_CURVE('',#138596,#138604,#138606,.T.); +#138604 = VERTEX_POINT('',#138605); +#138605 = CARTESIAN_POINT('',(85.46279,-119.021428,1.585)); +#138606 = LINE('',#138607,#138608); +#138607 = CARTESIAN_POINT('',(85.457464,-118.981809,1.585)); +#138608 = VECTOR('',#138609,1.); +#138609 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#138610 = ORIENTED_EDGE('',*,*,#138611,.T.); +#138611 = EDGE_CURVE('',#138604,#138612,#138614,.T.); +#138612 = VERTEX_POINT('',#138613); +#138613 = CARTESIAN_POINT('',(85.459908,-119.298311,1.585)); +#138614 = LINE('',#138615,#138616); +#138615 = CARTESIAN_POINT('',(85.46279,-119.021428,1.585)); +#138616 = VECTOR('',#138617,1.); +#138617 = DIRECTION('',(-1.040816479305E-02,-0.999945833586,0.)); +#138618 = ORIENTED_EDGE('',*,*,#138619,.T.); +#138619 = EDGE_CURVE('',#138612,#138620,#138622,.T.); +#138620 = VERTEX_POINT('',#138621); +#138621 = CARTESIAN_POINT('',(85.446954,-119.336129,1.585)); +#138622 = LINE('',#138623,#138624); +#138623 = CARTESIAN_POINT('',(85.459908,-119.298311,1.585)); +#138624 = VECTOR('',#138625,1.); +#138625 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#138626 = ORIENTED_EDGE('',*,*,#138627,.T.); +#138627 = EDGE_CURVE('',#138620,#138628,#138630,.T.); +#138628 = VERTEX_POINT('',#138629); +#138629 = CARTESIAN_POINT('',(85.307479,-119.608634,1.585)); +#138630 = LINE('',#138631,#138632); +#138631 = CARTESIAN_POINT('',(85.446954,-119.336129,1.585)); +#138632 = VECTOR('',#138633,1.); +#138633 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#138634 = ORIENTED_EDGE('',*,*,#138635,.T.); +#138635 = EDGE_CURVE('',#138628,#138636,#138638,.T.); +#138636 = VERTEX_POINT('',#138637); +#138637 = CARTESIAN_POINT('',(85.148507,-119.765197,1.585)); +#138638 = LINE('',#138639,#138640); +#138639 = CARTESIAN_POINT('',(85.307479,-119.608634,1.585)); +#138640 = VECTOR('',#138641,1.); +#138641 = DIRECTION('',(-0.712484531253,-0.701687817141,0.)); +#138642 = ORIENTED_EDGE('',*,*,#138643,.T.); +#138643 = EDGE_CURVE('',#138636,#138644,#138646,.T.); +#138644 = VERTEX_POINT('',#138645); +#138645 = CARTESIAN_POINT('',(84.85717,-119.908959,1.585)); +#138646 = LINE('',#138647,#138648); +#138647 = CARTESIAN_POINT('',(85.148507,-119.765197,1.585)); +#138648 = VECTOR('',#138649,1.); +#138649 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#138650 = ORIENTED_EDGE('',*,*,#138651,.T.); +#138651 = EDGE_CURVE('',#138644,#138652,#138654,.T.); +#138652 = VERTEX_POINT('',#138653); +#138653 = CARTESIAN_POINT('',(83.143956,-119.899913,1.585)); +#138654 = CIRCLE('',#138655,2.460365171697); +#138655 = AXIS2_PLACEMENT_3D('',#138656,#138657,#138658); +#138656 = CARTESIAN_POINT('',(84.012741069123,-117.5980421778,1.585)); +#138657 = DIRECTION('',(-0.,0.,-1.)); +#138658 = DIRECTION('',(0.343212845227,-0.93925765521,-0.)); +#138659 = ORIENTED_EDGE('',*,*,#138660,.T.); +#138660 = EDGE_CURVE('',#138652,#138661,#138663,.T.); +#138661 = VERTEX_POINT('',#138662); +#138662 = CARTESIAN_POINT('',(82.868442,-119.758975,1.585)); +#138663 = LINE('',#138664,#138665); +#138664 = CARTESIAN_POINT('',(83.143956,-119.899913,1.585)); +#138665 = VECTOR('',#138666,1.); +#138666 = DIRECTION('',(-0.890277840055,0.455417794456,0.)); +#138667 = ORIENTED_EDGE('',*,*,#138668,.T.); +#138668 = EDGE_CURVE('',#138661,#138669,#138671,.T.); +#138669 = VERTEX_POINT('',#138670); +#138670 = CARTESIAN_POINT('',(82.711879,-119.600001,1.585)); +#138671 = LINE('',#138672,#138673); +#138672 = CARTESIAN_POINT('',(82.868442,-119.758975,1.585)); +#138673 = VECTOR('',#138674,1.); +#138674 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#138675 = ORIENTED_EDGE('',*,*,#138676,.T.); +#138676 = EDGE_CURVE('',#138669,#138677,#138679,.T.); +#138677 = VERTEX_POINT('',#138678); +#138678 = CARTESIAN_POINT('',(82.568116,-119.308666,1.585)); +#138679 = LINE('',#138680,#138681); +#138680 = CARTESIAN_POINT('',(82.711879,-119.600001,1.585)); +#138681 = VECTOR('',#138682,1.); +#138682 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#138683 = ORIENTED_EDGE('',*,*,#138684,.T.); +#138684 = EDGE_CURVE('',#138677,#138685,#138687,.T.); +#138685 = VERTEX_POINT('',#138686); +#138686 = CARTESIAN_POINT('',(82.56279,-119.269047,1.585)); +#138687 = LINE('',#138688,#138689); +#138688 = CARTESIAN_POINT('',(82.568116,-119.308666,1.585)); +#138689 = VECTOR('',#138690,1.); +#138690 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#138691 = ORIENTED_EDGE('',*,*,#138692,.T.); +#138692 = EDGE_CURVE('',#138685,#138693,#138695,.T.); +#138693 = VERTEX_POINT('',#138694); +#138694 = CARTESIAN_POINT('',(82.565672,-118.992164,1.585)); +#138695 = LINE('',#138696,#138697); +#138696 = CARTESIAN_POINT('',(82.56279,-119.269047,1.585)); +#138697 = VECTOR('',#138698,1.); +#138698 = DIRECTION('',(1.040816479305E-02,0.999945833586,0.)); +#138699 = ORIENTED_EDGE('',*,*,#138700,.T.); +#138700 = EDGE_CURVE('',#138693,#138701,#138703,.T.); +#138701 = VERTEX_POINT('',#138702); +#138702 = CARTESIAN_POINT('',(82.578626,-118.954346,1.585)); +#138703 = LINE('',#138704,#138705); +#138704 = CARTESIAN_POINT('',(82.565672,-118.992164,1.585)); +#138705 = VECTOR('',#138706,1.); +#138706 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#138707 = ORIENTED_EDGE('',*,*,#138708,.T.); +#138708 = EDGE_CURVE('',#138701,#138709,#138711,.T.); +#138709 = VERTEX_POINT('',#138710); +#138710 = CARTESIAN_POINT('',(82.718101,-118.681841,1.585)); +#138711 = LINE('',#138712,#138713); +#138712 = CARTESIAN_POINT('',(82.578626,-118.954346,1.585)); +#138713 = VECTOR('',#138714,1.); +#138714 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#138715 = ORIENTED_EDGE('',*,*,#138716,.T.); +#138716 = EDGE_CURVE('',#138709,#138538,#138717,.T.); +#138717 = LINE('',#138718,#138719); +#138718 = CARTESIAN_POINT('',(82.718101,-118.681841,1.585)); +#138719 = VECTOR('',#138720,1.); +#138720 = DIRECTION('',(0.712486771907,0.701685542004,0.)); +#138721 = FACE_BOUND('',#138722,.F.); +#138722 = EDGE_LOOP('',(#138723,#138734,#138742,#138750,#138759,#138767, + #138775,#138784,#138792,#138800,#138809,#138817)); +#138723 = ORIENTED_EDGE('',*,*,#138724,.T.); +#138724 = EDGE_CURVE('',#138725,#138727,#138729,.T.); +#138725 = VERTEX_POINT('',#138726); +#138726 = CARTESIAN_POINT('',(84.765199,-118.667718,1.585)); +#138727 = VERTEX_POINT('',#138728); +#138728 = CARTESIAN_POINT('',(83.260385,-118.667716,1.585)); +#138729 = CIRCLE('',#138730,2.164280308008); +#138730 = AXIS2_PLACEMENT_3D('',#138731,#138732,#138733); +#138731 = CARTESIAN_POINT('',(84.012789302944,-120.6970008534,1.585)); +#138732 = DIRECTION('',(0.,0.,1.)); +#138733 = DIRECTION('',(0.347648913254,0.937624782689,-0.)); +#138734 = ORIENTED_EDGE('',*,*,#138735,.T.); +#138735 = EDGE_CURVE('',#138727,#138736,#138738,.T.); +#138736 = VERTEX_POINT('',#138737); +#138737 = CARTESIAN_POINT('',(83.049263,-118.773278,1.585)); +#138738 = LINE('',#138739,#138740); +#138739 = CARTESIAN_POINT('',(83.260385,-118.667716,1.585)); +#138740 = VECTOR('',#138741,1.); +#138741 = DIRECTION('',(-0.89442549638,-0.447216984724,0.)); +#138742 = ORIENTED_EDGE('',*,*,#138743,.T.); +#138743 = EDGE_CURVE('',#138736,#138744,#138746,.T.); +#138744 = VERTEX_POINT('',#138745); +#138745 = CARTESIAN_POINT('',(82.959877,-118.862663,1.585)); +#138746 = LINE('',#138747,#138748); +#138747 = CARTESIAN_POINT('',(83.049263,-118.773278,1.585)); +#138748 = VECTOR('',#138749,1.); +#138749 = DIRECTION('',(-0.707110736553,-0.707102825798,0.)); +#138750 = ORIENTED_EDGE('',*,*,#138751,.T.); +#138751 = EDGE_CURVE('',#138744,#138752,#138754,.T.); +#138752 = VERTEX_POINT('',#138753); +#138753 = CARTESIAN_POINT('',(82.959878,-119.427812,1.585)); +#138754 = CIRCLE('',#138755,0.428730625396); +#138755 = AXIS2_PLACEMENT_3D('',#138756,#138757,#138758); +#138756 = CARTESIAN_POINT('',(83.282308269471,-119.1452369294,1.585)); +#138757 = DIRECTION('',(0.,0.,1.)); +#138758 = DIRECTION('',(-0.752060269016,0.659094342084,0.)); +#138759 = ORIENTED_EDGE('',*,*,#138760,.T.); +#138760 = EDGE_CURVE('',#138752,#138761,#138763,.T.); +#138761 = VERTEX_POINT('',#138762); +#138762 = CARTESIAN_POINT('',(83.049263,-119.517198,1.585)); +#138763 = LINE('',#138764,#138765); +#138764 = CARTESIAN_POINT('',(82.959878,-119.427812,1.585)); +#138765 = VECTOR('',#138766,1.); +#138766 = DIRECTION('',(0.707102825798,-0.707110736553,0.)); +#138767 = ORIENTED_EDGE('',*,*,#138768,.T.); +#138768 = EDGE_CURVE('',#138761,#138769,#138771,.T.); +#138769 = VERTEX_POINT('',#138770); +#138770 = CARTESIAN_POINT('',(83.260383,-119.622757,1.585)); +#138771 = LINE('',#138772,#138773); +#138772 = CARTESIAN_POINT('',(83.049263,-119.517198,1.585)); +#138773 = VECTOR('',#138774,1.); +#138774 = DIRECTION('',(0.89442888563,-0.447210206225,0.)); +#138775 = ORIENTED_EDGE('',*,*,#138776,.T.); +#138776 = EDGE_CURVE('',#138769,#138777,#138779,.T.); +#138777 = VERTEX_POINT('',#138778); +#138778 = CARTESIAN_POINT('',(84.765196,-119.622758,1.585)); +#138779 = CIRCLE('',#138780,2.164247267134); +#138780 = AXIS2_PLACEMENT_3D('',#138781,#138782,#138783); +#138781 = CARTESIAN_POINT('',(84.012790848506,-117.5935087,1.585)); +#138782 = DIRECTION('',(0.,0.,1.)); +#138783 = DIRECTION('',(-0.347653366568,-0.937623131495,0.)); +#138784 = ORIENTED_EDGE('',*,*,#138785,.T.); +#138785 = EDGE_CURVE('',#138777,#138786,#138788,.T.); +#138786 = VERTEX_POINT('',#138787); +#138787 = CARTESIAN_POINT('',(84.976316,-119.517198,1.585)); +#138788 = LINE('',#138789,#138790); +#138789 = CARTESIAN_POINT('',(84.765196,-119.622758,1.585)); +#138790 = VECTOR('',#138791,1.); +#138791 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#138792 = ORIENTED_EDGE('',*,*,#138793,.T.); +#138793 = EDGE_CURVE('',#138786,#138794,#138796,.T.); +#138794 = VERTEX_POINT('',#138795); +#138795 = CARTESIAN_POINT('',(85.065701,-119.427812,1.585)); +#138796 = LINE('',#138797,#138798); +#138797 = CARTESIAN_POINT('',(84.976316,-119.517198,1.585)); +#138798 = VECTOR('',#138799,1.); +#138799 = DIRECTION('',(0.707102825798,0.707110736553,0.)); +#138800 = ORIENTED_EDGE('',*,*,#138801,.T.); +#138801 = EDGE_CURVE('',#138794,#138802,#138804,.T.); +#138802 = VERTEX_POINT('',#138803); +#138803 = CARTESIAN_POINT('',(85.065702,-118.862663,1.585)); +#138804 = CIRCLE('',#138805,0.428727279187); +#138805 = AXIS2_PLACEMENT_3D('',#138806,#138807,#138808); +#138806 = CARTESIAN_POINT('',(84.743275179939,-119.1452369294,1.585)); +#138807 = DIRECTION('',(0.,-0.,1.)); +#138808 = DIRECTION('',(0.752053428167,-0.65910214776,-0.)); +#138809 = ORIENTED_EDGE('',*,*,#138810,.T.); +#138810 = EDGE_CURVE('',#138802,#138811,#138813,.T.); +#138811 = VERTEX_POINT('',#138812); +#138812 = CARTESIAN_POINT('',(84.976316,-118.773277,1.585)); +#138813 = LINE('',#138814,#138815); +#138814 = CARTESIAN_POINT('',(85.065702,-118.862663,1.585)); +#138815 = VECTOR('',#138816,1.); +#138816 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#138817 = ORIENTED_EDGE('',*,*,#138818,.T.); +#138818 = EDGE_CURVE('',#138811,#138725,#138819,.T.); +#138819 = LINE('',#138820,#138821); +#138820 = CARTESIAN_POINT('',(84.976316,-118.773277,1.585)); +#138821 = VECTOR('',#138822,1.); +#138822 = DIRECTION('',(-0.894426343671,0.447215290154,0.)); +#138823 = PLANE('',#138824); +#138824 = AXIS2_PLACEMENT_3D('',#138825,#138826,#138827); +#138825 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138826 = DIRECTION('',(0.,0.,1.)); +#138827 = DIRECTION('',(1.,0.,-0.)); +#138828 = SHELL_BASED_SURFACE_MODEL('',(#138829)); +#138829 = OPEN_SHELL('',(#138830)); +#138830 = ADVANCED_FACE('',(#138831),#139006,.T.); +#138831 = FACE_BOUND('',#138832,.F.); +#138832 = EDGE_LOOP('',(#138833,#138843,#138851,#138859,#138867,#138875, + #138884,#138892,#138901,#138909,#138917,#138925,#138933,#138941, + #138950,#138958,#138966,#138974,#138983,#138991,#139000)); +#138833 = ORIENTED_EDGE('',*,*,#138834,.T.); +#138834 = EDGE_CURVE('',#138835,#138837,#138839,.T.); +#138835 = VERTEX_POINT('',#138836); +#138836 = CARTESIAN_POINT('',(206.151866,-118.795696,1.585)); +#138837 = VERTEX_POINT('',#138838); +#138838 = CARTESIAN_POINT('',(206.272313,-118.737636,1.585)); +#138839 = LINE('',#138840,#138841); +#138840 = CARTESIAN_POINT('',(206.151866,-118.795696,1.585)); +#138841 = VECTOR('',#138842,1.); +#138842 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#138843 = ORIENTED_EDGE('',*,*,#138844,.T.); +#138844 = EDGE_CURVE('',#138837,#138845,#138847,.T.); +#138845 = VERTEX_POINT('',#138846); +#138846 = CARTESIAN_POINT('',(206.389588,-118.736924,1.585)); +#138847 = LINE('',#138848,#138849); +#138848 = CARTESIAN_POINT('',(206.272313,-118.737636,1.585)); +#138849 = VECTOR('',#138850,1.); +#138850 = DIRECTION('',(0.999981570774,6.071088282957E-03,0.)); +#138851 = ORIENTED_EDGE('',*,*,#138852,.T.); +#138852 = EDGE_CURVE('',#138845,#138853,#138855,.T.); +#138853 = VERTEX_POINT('',#138854); +#138854 = CARTESIAN_POINT('',(206.566708,-118.796454,1.585)); +#138855 = LINE('',#138856,#138857); +#138856 = CARTESIAN_POINT('',(206.389588,-118.736924,1.585)); +#138857 = VECTOR('',#138858,1.); +#138858 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#138859 = ORIENTED_EDGE('',*,*,#138860,.T.); +#138860 = EDGE_CURVE('',#138853,#138861,#138863,.T.); +#138861 = VERTEX_POINT('',#138862); +#138862 = CARTESIAN_POINT('',(207.021469,-119.249176,1.585)); +#138863 = LINE('',#138864,#138865); +#138864 = CARTESIAN_POINT('',(206.566708,-118.796454,1.585)); +#138865 = VECTOR('',#138866,1.); +#138866 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#138867 = ORIENTED_EDGE('',*,*,#138868,.T.); +#138868 = EDGE_CURVE('',#138861,#138869,#138871,.T.); +#138869 = VERTEX_POINT('',#138870); +#138870 = CARTESIAN_POINT('',(207.02291,-118.796563,1.585)); +#138871 = LINE('',#138872,#138873); +#138872 = CARTESIAN_POINT('',(207.021469,-119.249176,1.585)); +#138873 = VECTOR('',#138874,1.); +#138874 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#138875 = ORIENTED_EDGE('',*,*,#138876,.T.); +#138876 = EDGE_CURVE('',#138869,#138877,#138879,.T.); +#138877 = VERTEX_POINT('',#138878); +#138878 = CARTESIAN_POINT('',(207.171469,-118.811195,1.585)); +#138879 = CIRCLE('',#138880,7.500006711464E-02); +#138880 = AXIS2_PLACEMENT_3D('',#138881,#138882,#138883); +#138881 = CARTESIAN_POINT('',(207.09646893288,-118.8111949328,1.585)); +#138882 = DIRECTION('',(0.,0.,-1.)); +#138883 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#138884 = ORIENTED_EDGE('',*,*,#138885,.T.); +#138885 = EDGE_CURVE('',#138877,#138886,#138888,.T.); +#138886 = VERTEX_POINT('',#138887); +#138887 = CARTESIAN_POINT('',(207.170028,-119.444874,1.585)); +#138888 = LINE('',#138889,#138890); +#138889 = CARTESIAN_POINT('',(207.171469,-118.811195,1.585)); +#138890 = VECTOR('',#138891,1.); +#138891 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#138892 = ORIENTED_EDGE('',*,*,#138893,.T.); +#138893 = EDGE_CURVE('',#138886,#138894,#138896,.T.); +#138894 = VERTEX_POINT('',#138895); +#138895 = CARTESIAN_POINT('',(207.111101,-119.503801,1.585)); +#138896 = CIRCLE('',#138897,7.499663284017E-02); +#138897 = AXIS2_PLACEMENT_3D('',#138898,#138899,#138900); +#138898 = CARTESIAN_POINT('',(207.09647198775,-119.4302449877,1.585)); +#138899 = DIRECTION('',(0.,0.,-1.)); +#138900 = DIRECTION('',(0.980790863048,-0.195062254064,0.)); +#138901 = ORIENTED_EDGE('',*,*,#138902,.T.); +#138902 = EDGE_CURVE('',#138894,#138903,#138905,.T.); +#138903 = VERTEX_POINT('',#138904); +#138904 = CARTESIAN_POINT('',(207.073918,-119.500521,1.585)); +#138905 = LINE('',#138906,#138907); +#138906 = CARTESIAN_POINT('',(207.111101,-119.503801,1.585)); +#138907 = VECTOR('',#138908,1.); +#138908 = DIRECTION('',(-0.996131850393,8.787113652145E-02,0.)); +#138909 = ORIENTED_EDGE('',*,*,#138910,.T.); +#138910 = EDGE_CURVE('',#138903,#138911,#138913,.T.); +#138911 = VERTEX_POINT('',#138912); +#138912 = CARTESIAN_POINT('',(207.043436,-119.483275,1.585)); +#138913 = LINE('',#138914,#138915); +#138914 = CARTESIAN_POINT('',(207.073918,-119.500521,1.585)); +#138915 = VECTOR('',#138916,1.); +#138916 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#138917 = ORIENTED_EDGE('',*,*,#138918,.T.); +#138918 = EDGE_CURVE('',#138911,#138919,#138921,.T.); +#138919 = VERTEX_POINT('',#138920); +#138920 = CARTESIAN_POINT('',(206.484526,-118.924366,1.585)); +#138921 = LINE('',#138922,#138923); +#138922 = CARTESIAN_POINT('',(207.043436,-119.483275,1.585)); +#138923 = VECTOR('',#138924,1.); +#138924 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#138925 = ORIENTED_EDGE('',*,*,#138926,.T.); +#138926 = EDGE_CURVE('',#138919,#138927,#138929,.T.); +#138927 = VERTEX_POINT('',#138928); +#138928 = CARTESIAN_POINT('',(206.370013,-118.886195,1.585)); +#138929 = LINE('',#138930,#138931); +#138930 = CARTESIAN_POINT('',(206.484526,-118.924366,1.585)); +#138931 = VECTOR('',#138932,1.); +#138932 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#138933 = ORIENTED_EDGE('',*,*,#138934,.T.); +#138934 = EDGE_CURVE('',#138927,#138935,#138937,.T.); +#138935 = VERTEX_POINT('',#138936); +#138936 = CARTESIAN_POINT('',(206.30465,-118.886195,1.585)); +#138937 = LINE('',#138938,#138939); +#138938 = CARTESIAN_POINT('',(206.370013,-118.886195,1.585)); +#138939 = VECTOR('',#138940,1.); +#138940 = DIRECTION('',(-1.,0.,0.)); +#138941 = ORIENTED_EDGE('',*,*,#138942,.T.); +#138942 = EDGE_CURVE('',#138935,#138943,#138945,.T.); +#138943 = VERTEX_POINT('',#138944); +#138944 = CARTESIAN_POINT('',(206.171469,-119.019376,1.585)); +#138945 = CIRCLE('',#138946,0.18686440374); +#138946 = AXIS2_PLACEMENT_3D('',#138947,#138948,#138949); +#138947 = CARTESIAN_POINT('',(206.352186,-119.066912,1.585)); +#138948 = DIRECTION('',(0.,0.,1.)); +#138949 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#138950 = ORIENTED_EDGE('',*,*,#138951,.T.); +#138951 = EDGE_CURVE('',#138943,#138952,#138954,.T.); +#138952 = VERTEX_POINT('',#138953); +#138953 = CARTESIAN_POINT('',(206.171469,-119.222061,1.585)); +#138954 = LINE('',#138955,#138956); +#138955 = CARTESIAN_POINT('',(206.171469,-119.019376,1.585)); +#138956 = VECTOR('',#138957,1.); +#138957 = DIRECTION('',(0.,-1.,0.)); +#138958 = ORIENTED_EDGE('',*,*,#138959,.T.); +#138959 = EDGE_CURVE('',#138952,#138960,#138962,.T.); +#138960 = VERTEX_POINT('',#138961); +#138961 = CARTESIAN_POINT('',(206.205727,-119.290577,1.585)); +#138962 = LINE('',#138963,#138964); +#138963 = CARTESIAN_POINT('',(206.171469,-119.222061,1.585)); +#138964 = VECTOR('',#138965,1.); +#138965 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#138966 = ORIENTED_EDGE('',*,*,#138967,.T.); +#138967 = EDGE_CURVE('',#138960,#138968,#138970,.T.); +#138968 = VERTEX_POINT('',#138969); +#138969 = CARTESIAN_POINT('',(206.254067,-119.340955,1.585)); +#138970 = LINE('',#138971,#138972); +#138971 = CARTESIAN_POINT('',(206.205727,-119.290577,1.585)); +#138972 = VECTOR('',#138973,1.); +#138973 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#138974 = ORIENTED_EDGE('',*,*,#138975,.T.); +#138975 = EDGE_CURVE('',#138968,#138976,#138978,.T.); +#138976 = VERTEX_POINT('',#138977); +#138977 = CARTESIAN_POINT('',(206.138674,-119.435656,1.585)); +#138978 = CIRCLE('',#138979,7.500003178655E-02); +#138979 = AXIS2_PLACEMENT_3D('',#138980,#138981,#138982); +#138980 = CARTESIAN_POINT('',(206.19170656212,-119.3826225,1.585)); +#138981 = DIRECTION('',(0.,0.,-1.)); +#138982 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#138983 = ORIENTED_EDGE('',*,*,#138984,.T.); +#138984 = EDGE_CURVE('',#138976,#138985,#138987,.T.); +#138985 = VERTEX_POINT('',#138986); +#138986 = CARTESIAN_POINT('',(206.077006,-119.368545,1.585)); +#138987 = LINE('',#138988,#138989); +#138988 = CARTESIAN_POINT('',(206.138674,-119.435656,1.585)); +#138989 = VECTOR('',#138990,1.); +#138990 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#138991 = ORIENTED_EDGE('',*,*,#138992,.T.); +#138992 = EDGE_CURVE('',#138985,#138993,#138995,.T.); +#138993 = VERTEX_POINT('',#138994); +#138994 = CARTESIAN_POINT('',(206.086336,-118.859149,1.585)); +#138995 = CIRCLE('',#138996,0.450051227017); +#138996 = AXIS2_PLACEMENT_3D('',#138997,#138998,#138999); +#138997 = CARTESIAN_POINT('',(206.45262532415,-119.1206413286,1.585)); +#138998 = DIRECTION('',(0.,0.,-1.)); +#138999 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#139000 = ORIENTED_EDGE('',*,*,#139001,.T.); +#139001 = EDGE_CURVE('',#138993,#138835,#139002,.T.); +#139002 = LINE('',#139003,#139004); +#139003 = CARTESIAN_POINT('',(206.086336,-118.859149,1.585)); +#139004 = VECTOR('',#139005,1.); +#139005 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#139006 = PLANE('',#139007); +#139007 = AXIS2_PLACEMENT_3D('',#139008,#139009,#139010); +#139008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139009 = DIRECTION('',(0.,0.,1.)); +#139010 = DIRECTION('',(1.,0.,-0.)); +#139011 = SHELL_BASED_SURFACE_MODEL('',(#139012)); +#139012 = OPEN_SHELL('',(#139013)); +#139013 = ADVANCED_FACE('',(#139014),#139050,.T.); +#139014 = FACE_BOUND('',#139015,.F.); +#139015 = EDGE_LOOP('',(#139016,#139027,#139035,#139044)); +#139016 = ORIENTED_EDGE('',*,*,#139017,.T.); +#139017 = EDGE_CURVE('',#139018,#139020,#139022,.T.); +#139018 = VERTEX_POINT('',#139019); +#139019 = CARTESIAN_POINT('',(123.44165,-119.2431,1.585)); +#139020 = VERTEX_POINT('',#139021); +#139021 = CARTESIAN_POINT('',(123.44165,-119.1231,1.585)); +#139022 = CIRCLE('',#139023,6.000000000043E-02); +#139023 = AXIS2_PLACEMENT_3D('',#139024,#139025,#139026); +#139024 = CARTESIAN_POINT('',(123.44164977441,-119.1831,1.585)); +#139025 = DIRECTION('',(0.,0.,-1.)); +#139026 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#139027 = ORIENTED_EDGE('',*,*,#139028,.T.); +#139028 = EDGE_CURVE('',#139020,#139029,#139031,.T.); +#139029 = VERTEX_POINT('',#139030); +#139030 = CARTESIAN_POINT('',(124.94165,-119.1231,1.585)); +#139031 = LINE('',#139032,#139033); +#139032 = CARTESIAN_POINT('',(123.44165,-119.1231,1.585)); +#139033 = VECTOR('',#139034,1.); +#139034 = DIRECTION('',(1.,0.,0.)); +#139035 = ORIENTED_EDGE('',*,*,#139036,.T.); +#139036 = EDGE_CURVE('',#139029,#139037,#139039,.T.); +#139037 = VERTEX_POINT('',#139038); +#139038 = CARTESIAN_POINT('',(124.94165,-119.2431,1.585)); +#139039 = CIRCLE('',#139040,6.000000000042E-02); +#139040 = AXIS2_PLACEMENT_3D('',#139041,#139042,#139043); +#139041 = CARTESIAN_POINT('',(124.94165022558,-119.1831,1.585)); +#139042 = DIRECTION('',(0.,0.,-1.)); +#139043 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#139044 = ORIENTED_EDGE('',*,*,#139045,.T.); +#139045 = EDGE_CURVE('',#139037,#139018,#139046,.T.); +#139046 = LINE('',#139047,#139048); +#139047 = CARTESIAN_POINT('',(124.94165,-119.2431,1.585)); +#139048 = VECTOR('',#139049,1.); +#139049 = DIRECTION('',(-1.,0.,0.)); +#139050 = PLANE('',#139051); +#139051 = AXIS2_PLACEMENT_3D('',#139052,#139053,#139054); +#139052 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139053 = DIRECTION('',(0.,0.,1.)); +#139054 = DIRECTION('',(1.,0.,-0.)); +#139055 = SHELL_BASED_SURFACE_MODEL('',(#139056)); +#139056 = OPEN_SHELL('',(#139057)); +#139057 = ADVANCED_FACE('',(#139058),#139192,.T.); +#139058 = FACE_BOUND('',#139059,.F.); +#139059 = EDGE_LOOP('',(#139060,#139070,#139078,#139087,#139095,#139103, + #139112,#139120,#139129,#139137,#139145,#139153,#139161,#139170, + #139178,#139186)); +#139060 = ORIENTED_EDGE('',*,*,#139061,.T.); +#139061 = EDGE_CURVE('',#139062,#139064,#139066,.T.); +#139062 = VERTEX_POINT('',#139063); +#139063 = CARTESIAN_POINT('',(100.596912,-117.701841,1.585)); +#139064 = VERTEX_POINT('',#139065); +#139065 = CARTESIAN_POINT('',(100.635368,-117.68126,1.585)); +#139066 = LINE('',#139067,#139068); +#139067 = CARTESIAN_POINT('',(100.596912,-117.701841,1.585)); +#139068 = VECTOR('',#139069,1.); +#139069 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#139070 = ORIENTED_EDGE('',*,*,#139071,.T.); +#139071 = EDGE_CURVE('',#139064,#139072,#139074,.T.); +#139072 = VERTEX_POINT('',#139073); +#139073 = CARTESIAN_POINT('',(100.657205,-117.68126,1.585)); +#139074 = LINE('',#139075,#139076); +#139075 = CARTESIAN_POINT('',(100.635368,-117.68126,1.585)); +#139076 = VECTOR('',#139077,1.); +#139077 = DIRECTION('',(1.,0.,0.)); +#139078 = ORIENTED_EDGE('',*,*,#139079,.T.); +#139079 = EDGE_CURVE('',#139072,#139080,#139082,.T.); +#139080 = VERTEX_POINT('',#139081); +#139081 = CARTESIAN_POINT('',(100.725,-117.754819,1.585)); +#139082 = CIRCLE('',#139083,7.216898094225E-02); +#139083 = AXIS2_PLACEMENT_3D('',#139084,#139085,#139086); +#139084 = CARTESIAN_POINT('',(100.65284706389,-117.7532972834,1.585)); +#139085 = DIRECTION('',(0.,0.,-1.)); +#139086 = DIRECTION('',(6.038516895247E-02,0.998175150648,0.)); +#139087 = ORIENTED_EDGE('',*,*,#139088,.T.); +#139088 = EDGE_CURVE('',#139080,#139089,#139091,.T.); +#139089 = VERTEX_POINT('',#139090); +#139090 = CARTESIAN_POINT('',(100.725,-118.679819,1.585)); +#139091 = LINE('',#139092,#139093); +#139092 = CARTESIAN_POINT('',(100.725,-117.754819,1.585)); +#139093 = VECTOR('',#139094,1.); +#139094 = DIRECTION('',(0.,-1.,0.)); +#139095 = ORIENTED_EDGE('',*,*,#139096,.T.); +#139096 = EDGE_CURVE('',#139089,#139097,#139099,.T.); +#139097 = VERTEX_POINT('',#139098); +#139098 = CARTESIAN_POINT('',(100.950346,-118.68126,1.585)); +#139099 = LINE('',#139100,#139101); +#139100 = CARTESIAN_POINT('',(100.725,-118.679819,1.585)); +#139101 = VECTOR('',#139102,1.); +#139102 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#139103 = ORIENTED_EDGE('',*,*,#139104,.T.); +#139104 = EDGE_CURVE('',#139097,#139105,#139107,.T.); +#139105 = VERTEX_POINT('',#139106); +#139106 = CARTESIAN_POINT('',(100.935714,-118.829819,1.585)); +#139107 = CIRCLE('',#139108,7.500006711464E-02); +#139108 = AXIS2_PLACEMENT_3D('',#139109,#139110,#139111); +#139109 = CARTESIAN_POINT('',(100.93571406711,-118.7548189328,1.585)); +#139110 = DIRECTION('',(0.,0.,-1.)); +#139111 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#139112 = ORIENTED_EDGE('',*,*,#139113,.T.); +#139113 = EDGE_CURVE('',#139105,#139114,#139116,.T.); +#139114 = VERTEX_POINT('',#139115); +#139115 = CARTESIAN_POINT('',(100.349654,-118.828378,1.585)); +#139116 = LINE('',#139117,#139118); +#139117 = CARTESIAN_POINT('',(100.935714,-118.829819,1.585)); +#139118 = VECTOR('',#139119,1.); +#139119 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#139120 = ORIENTED_EDGE('',*,*,#139121,.T.); +#139121 = EDGE_CURVE('',#139114,#139122,#139124,.T.); +#139122 = VERTEX_POINT('',#139123); +#139123 = CARTESIAN_POINT('',(100.364286,-118.679819,1.585)); +#139124 = CIRCLE('',#139125,7.500006711463E-02); +#139125 = AXIS2_PLACEMENT_3D('',#139126,#139127,#139128); +#139126 = CARTESIAN_POINT('',(100.36428593288,-118.7548190671,1.585)); +#139127 = DIRECTION('',(0.,0.,-1.)); +#139128 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#139129 = ORIENTED_EDGE('',*,*,#139130,.T.); +#139130 = EDGE_CURVE('',#139122,#139131,#139133,.T.); +#139131 = VERTEX_POINT('',#139132); +#139132 = CARTESIAN_POINT('',(100.575,-118.679819,1.585)); +#139133 = LINE('',#139134,#139135); +#139134 = CARTESIAN_POINT('',(100.364286,-118.679819,1.585)); +#139135 = VECTOR('',#139136,1.); +#139136 = DIRECTION('',(1.,0.,0.)); +#139137 = ORIENTED_EDGE('',*,*,#139138,.T.); +#139138 = EDGE_CURVE('',#139131,#139139,#139141,.T.); +#139139 = VERTEX_POINT('',#139140); +#139140 = CARTESIAN_POINT('',(100.575,-117.983504,1.585)); +#139141 = LINE('',#139142,#139143); +#139142 = CARTESIAN_POINT('',(100.575,-118.679819,1.585)); +#139143 = VECTOR('',#139144,1.); +#139144 = DIRECTION('',(0.,1.,0.)); +#139145 = ORIENTED_EDGE('',*,*,#139146,.T.); +#139146 = EDGE_CURVE('',#139139,#139147,#139149,.T.); +#139147 = VERTEX_POINT('',#139148); +#139148 = CARTESIAN_POINT('',(100.499364,-118.056031,1.585)); +#139149 = LINE('',#139150,#139151); +#139150 = CARTESIAN_POINT('',(100.575,-117.983504,1.585)); +#139151 = VECTOR('',#139152,1.); +#139152 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#139153 = ORIENTED_EDGE('',*,*,#139154,.T.); +#139154 = EDGE_CURVE('',#139147,#139155,#139157,.T.); +#139155 = VERTEX_POINT('',#139156); +#139156 = CARTESIAN_POINT('',(100.384095,-118.11287,1.585)); +#139157 = LINE('',#139158,#139159); +#139158 = CARTESIAN_POINT('',(100.499364,-118.056031,1.585)); +#139159 = VECTOR('',#139160,1.); +#139160 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#139161 = ORIENTED_EDGE('',*,*,#139162,.T.); +#139162 = EDGE_CURVE('',#139155,#139163,#139165,.T.); +#139163 = VERTEX_POINT('',#139164); +#139164 = CARTESIAN_POINT('',(100.330745,-117.973451,1.585)); +#139165 = CIRCLE('',#139166,7.500005272362E-02); +#139166 = AXIS2_PLACEMENT_3D('',#139167,#139168,#139169); +#139167 = CARTESIAN_POINT('',(100.36428555676,-118.0405333297,1.585)); +#139168 = DIRECTION('',(0.,0.,-1.)); +#139169 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#139170 = ORIENTED_EDGE('',*,*,#139171,.T.); +#139171 = EDGE_CURVE('',#139163,#139172,#139174,.T.); +#139172 = VERTEX_POINT('',#139173); +#139173 = CARTESIAN_POINT('',(100.415097,-117.931275,1.585)); +#139174 = LINE('',#139175,#139176); +#139175 = CARTESIAN_POINT('',(100.330745,-117.973451,1.585)); +#139176 = VECTOR('',#139177,1.); +#139177 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#139178 = ORIENTED_EDGE('',*,*,#139179,.T.); +#139179 = EDGE_CURVE('',#139172,#139180,#139182,.T.); +#139180 = VERTEX_POINT('',#139181); +#139181 = CARTESIAN_POINT('',(100.496476,-117.849896,1.585)); +#139182 = LINE('',#139183,#139184); +#139183 = CARTESIAN_POINT('',(100.415097,-117.931275,1.585)); +#139184 = VECTOR('',#139185,1.); +#139185 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#139186 = ORIENTED_EDGE('',*,*,#139187,.T.); +#139187 = EDGE_CURVE('',#139180,#139062,#139188,.T.); +#139188 = LINE('',#139189,#139190); +#139189 = CARTESIAN_POINT('',(100.496476,-117.849896,1.585)); +#139190 = VECTOR('',#139191,1.); +#139191 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#139192 = PLANE('',#139193); +#139193 = AXIS2_PLACEMENT_3D('',#139194,#139195,#139196); +#139194 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139195 = DIRECTION('',(0.,0.,1.)); +#139196 = DIRECTION('',(1.,0.,-0.)); +#139197 = SHELL_BASED_SURFACE_MODEL('',(#139198)); +#139198 = OPEN_SHELL('',(#139199)); +#139199 = ADVANCED_FACE('',(#139200,#139316),#139399,.T.); +#139200 = FACE_BOUND('',#139201,.F.); +#139201 = EDGE_LOOP('',(#139202,#139213,#139221,#139229,#139237,#139245, + #139253,#139261,#139269,#139277,#139285,#139293,#139301,#139310)); +#139202 = ORIENTED_EDGE('',*,*,#139203,.T.); +#139203 = EDGE_CURVE('',#139204,#139206,#139208,.T.); +#139204 = VERTEX_POINT('',#139205); +#139205 = CARTESIAN_POINT('',(99.338346,-117.740187,1.585)); +#139206 = VERTEX_POINT('',#139207); +#139207 = CARTESIAN_POINT('',(99.411905,-117.679819,1.585)); +#139208 = CIRCLE('',#139209,7.500074938988E-02); +#139209 = AXIS2_PLACEMENT_3D('',#139210,#139211,#139212); +#139210 = CARTESIAN_POINT('',(99.41190546611,-117.7548197493,1.585)); +#139211 = DIRECTION('',(0.,0.,-1.)); +#139212 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#139213 = ORIENTED_EDGE('',*,*,#139214,.T.); +#139214 = EDGE_CURVE('',#139206,#139215,#139217,.T.); +#139215 = VERTEX_POINT('',#139216); +#139216 = CARTESIAN_POINT('',(99.657405,-117.680548,1.585)); +#139217 = LINE('',#139218,#139219); +#139218 = CARTESIAN_POINT('',(99.411905,-117.679819,1.585)); +#139219 = VECTOR('',#139220,1.); +#139220 = DIRECTION('',(0.999995591212,-2.969437010186E-03,0.)); +#139221 = ORIENTED_EDGE('',*,*,#139222,.T.); +#139222 = EDGE_CURVE('',#139215,#139223,#139225,.T.); +#139223 = VERTEX_POINT('',#139224); +#139224 = CARTESIAN_POINT('',(99.834525,-117.740078,1.585)); +#139225 = LINE('',#139226,#139227); +#139226 = CARTESIAN_POINT('',(99.657405,-117.680548,1.585)); +#139227 = VECTOR('',#139228,1.); +#139228 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#139229 = ORIENTED_EDGE('',*,*,#139230,.T.); +#139230 = EDGE_CURVE('',#139223,#139231,#139233,.T.); +#139231 = VERTEX_POINT('',#139232); +#139232 = CARTESIAN_POINT('',(99.951214,-117.85784,1.585)); +#139233 = LINE('',#139234,#139235); +#139234 = CARTESIAN_POINT('',(99.834525,-117.740078,1.585)); +#139235 = VECTOR('',#139236,1.); +#139236 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#139237 = ORIENTED_EDGE('',*,*,#139238,.T.); +#139238 = EDGE_CURVE('',#139231,#139239,#139241,.T.); +#139239 = VERTEX_POINT('',#139240); +#139240 = CARTESIAN_POINT('',(100.008475,-117.974724,1.585)); +#139241 = LINE('',#139242,#139243); +#139242 = CARTESIAN_POINT('',(99.951214,-117.85784,1.585)); +#139243 = VECTOR('',#139244,1.); +#139244 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#139245 = ORIENTED_EDGE('',*,*,#139246,.T.); +#139246 = EDGE_CURVE('',#139239,#139247,#139249,.T.); +#139247 = VERTEX_POINT('',#139248); +#139248 = CARTESIAN_POINT('',(100.058333,-118.18339,1.585)); +#139249 = LINE('',#139250,#139251); +#139250 = CARTESIAN_POINT('',(100.008475,-117.974724,1.585)); +#139251 = VECTOR('',#139252,1.); +#139252 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#139253 = ORIENTED_EDGE('',*,*,#139254,.T.); +#139254 = EDGE_CURVE('',#139247,#139255,#139257,.T.); +#139255 = VERTEX_POINT('',#139256); +#139256 = CARTESIAN_POINT('',(100.056094,-118.344437,1.585)); +#139257 = LINE('',#139258,#139259); +#139258 = CARTESIAN_POINT('',(100.058333,-118.18339,1.585)); +#139259 = VECTOR('',#139260,1.); +#139260 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#139261 = ORIENTED_EDGE('',*,*,#139262,.T.); +#139262 = EDGE_CURVE('',#139255,#139263,#139265,.T.); +#139263 = VERTEX_POINT('',#139264); +#139264 = CARTESIAN_POINT('',(100.002796,-118.550264,1.585)); +#139265 = LINE('',#139266,#139267); +#139266 = CARTESIAN_POINT('',(100.056094,-118.344437,1.585)); +#139267 = VECTOR('',#139268,1.); +#139268 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#139269 = ORIENTED_EDGE('',*,*,#139270,.T.); +#139270 = EDGE_CURVE('',#139263,#139271,#139273,.T.); +#139271 = VERTEX_POINT('',#139272); +#139272 = CARTESIAN_POINT('',(99.945846,-118.659244,1.585)); +#139273 = LINE('',#139274,#139275); +#139274 = CARTESIAN_POINT('',(100.002796,-118.550264,1.585)); +#139275 = VECTOR('',#139276,1.); +#139276 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#139277 = ORIENTED_EDGE('',*,*,#139278,.T.); +#139278 = EDGE_CURVE('',#139271,#139279,#139281,.T.); +#139279 = VERTEX_POINT('',#139280); +#139280 = CARTESIAN_POINT('',(99.829999,-118.772357,1.585)); +#139281 = LINE('',#139282,#139283); +#139282 = CARTESIAN_POINT('',(99.945846,-118.659244,1.585)); +#139283 = VECTOR('',#139284,1.); +#139284 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#139285 = ORIENTED_EDGE('',*,*,#139286,.T.); +#139286 = EDGE_CURVE('',#139279,#139287,#139289,.T.); +#139287 = VERTEX_POINT('',#139288); +#139288 = CARTESIAN_POINT('',(99.657405,-118.829089,1.585)); +#139289 = LINE('',#139290,#139291); +#139290 = CARTESIAN_POINT('',(99.829999,-118.772357,1.585)); +#139291 = VECTOR('',#139292,1.); +#139292 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#139293 = ORIENTED_EDGE('',*,*,#139294,.T.); +#139294 = EDGE_CURVE('',#139287,#139295,#139297,.T.); +#139295 = VERTEX_POINT('',#139296); +#139296 = CARTESIAN_POINT('',(99.397273,-118.828378,1.585)); +#139297 = LINE('',#139298,#139299); +#139298 = CARTESIAN_POINT('',(99.657405,-118.829089,1.585)); +#139299 = VECTOR('',#139300,1.); +#139300 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#139301 = ORIENTED_EDGE('',*,*,#139302,.T.); +#139302 = EDGE_CURVE('',#139295,#139303,#139305,.T.); +#139303 = VERTEX_POINT('',#139304); +#139304 = CARTESIAN_POINT('',(99.336905,-118.754819,1.585)); +#139305 = CIRCLE('',#139306,7.500074938988E-02); +#139306 = AXIS2_PLACEMENT_3D('',#139307,#139308,#139309); +#139307 = CARTESIAN_POINT('',(99.411905749388,-118.7548185338,1.585)); +#139308 = DIRECTION('',(0.,0.,-1.)); +#139309 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#139310 = ORIENTED_EDGE('',*,*,#139311,.T.); +#139311 = EDGE_CURVE('',#139303,#139204,#139312,.T.); +#139312 = LINE('',#139313,#139314); +#139313 = CARTESIAN_POINT('',(99.336905,-118.754819,1.585)); +#139314 = VECTOR('',#139315,1.); +#139315 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#139316 = FACE_BOUND('',#139317,.F.); +#139317 = EDGE_LOOP('',(#139318,#139328,#139336,#139344,#139352,#139360, + #139368,#139377,#139385,#139393)); +#139318 = ORIENTED_EDGE('',*,*,#139319,.T.); +#139319 = EDGE_CURVE('',#139320,#139322,#139324,.T.); +#139320 = VERTEX_POINT('',#139321); +#139321 = CARTESIAN_POINT('',(99.752343,-117.86799,1.585)); +#139322 = VERTEX_POINT('',#139323); +#139323 = CARTESIAN_POINT('',(99.63783,-117.829819,1.585)); +#139324 = LINE('',#139325,#139326); +#139325 = CARTESIAN_POINT('',(99.752343,-117.86799,1.585)); +#139326 = VECTOR('',#139327,1.); +#139327 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#139328 = ORIENTED_EDGE('',*,*,#139329,.T.); +#139329 = EDGE_CURVE('',#139322,#139330,#139332,.T.); +#139330 = VERTEX_POINT('',#139331); +#139331 = CARTESIAN_POINT('',(99.486905,-117.829819,1.585)); +#139332 = LINE('',#139333,#139334); +#139333 = CARTESIAN_POINT('',(99.63783,-117.829819,1.585)); +#139334 = VECTOR('',#139335,1.); +#139335 = DIRECTION('',(-1.,0.,0.)); +#139336 = ORIENTED_EDGE('',*,*,#139337,.T.); +#139337 = EDGE_CURVE('',#139330,#139338,#139340,.T.); +#139338 = VERTEX_POINT('',#139339); +#139339 = CARTESIAN_POINT('',(99.486905,-118.679819,1.585)); +#139340 = LINE('',#139341,#139342); +#139341 = CARTESIAN_POINT('',(99.486905,-117.829819,1.585)); +#139342 = VECTOR('',#139343,1.); +#139343 = DIRECTION('',(0.,-1.,0.)); +#139344 = ORIENTED_EDGE('',*,*,#139345,.T.); +#139345 = EDGE_CURVE('',#139338,#139346,#139348,.T.); +#139346 = VERTEX_POINT('',#139347); +#139347 = CARTESIAN_POINT('',(99.63783,-118.679819,1.585)); +#139348 = LINE('',#139349,#139350); +#139349 = CARTESIAN_POINT('',(99.486905,-118.679819,1.585)); +#139350 = VECTOR('',#139351,1.); +#139351 = DIRECTION('',(1.,0.,0.)); +#139352 = ORIENTED_EDGE('',*,*,#139353,.T.); +#139353 = EDGE_CURVE('',#139346,#139354,#139356,.T.); +#139354 = VERTEX_POINT('',#139355); +#139355 = CARTESIAN_POINT('',(99.752343,-118.641647,1.585)); +#139356 = LINE('',#139357,#139358); +#139357 = CARTESIAN_POINT('',(99.63783,-118.679819,1.585)); +#139358 = VECTOR('',#139359,1.); +#139359 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#139360 = ORIENTED_EDGE('',*,*,#139361,.T.); +#139361 = EDGE_CURVE('',#139354,#139362,#139364,.T.); +#139362 = VERTEX_POINT('',#139363); +#139363 = CARTESIAN_POINT('',(99.826455,-118.567534,1.585)); +#139364 = LINE('',#139365,#139366); +#139365 = CARTESIAN_POINT('',(99.752343,-118.641647,1.585)); +#139366 = VECTOR('',#139367,1.); +#139367 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#139368 = ORIENTED_EDGE('',*,*,#139369,.T.); +#139369 = EDGE_CURVE('',#139362,#139370,#139372,.T.); +#139370 = VERTEX_POINT('',#139371); +#139371 = CARTESIAN_POINT('',(99.908333,-118.192624,1.585)); +#139372 = CIRCLE('',#139373,0.611719141131); +#139373 = AXIS2_PLACEMENT_3D('',#139374,#139375,#139376); +#139374 = CARTESIAN_POINT('',(99.299920962243,-118.2561464364,1.585)); +#139375 = DIRECTION('',(0.,0.,1.)); +#139376 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#139377 = ORIENTED_EDGE('',*,*,#139378,.T.); +#139378 = EDGE_CURVE('',#139370,#139379,#139381,.T.); +#139379 = VERTEX_POINT('',#139380); +#139380 = CARTESIAN_POINT('',(99.864949,-118.01909,1.585)); +#139381 = LINE('',#139382,#139383); +#139382 = CARTESIAN_POINT('',(99.908333,-118.192624,1.585)); +#139383 = VECTOR('',#139384,1.); +#139384 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#139385 = ORIENTED_EDGE('',*,*,#139386,.T.); +#139386 = EDGE_CURVE('',#139379,#139387,#139389,.T.); +#139387 = VERTEX_POINT('',#139388); +#139388 = CARTESIAN_POINT('',(99.826456,-117.942103,1.585)); +#139389 = LINE('',#139390,#139391); +#139390 = CARTESIAN_POINT('',(99.864949,-118.01909,1.585)); +#139391 = VECTOR('',#139392,1.); +#139392 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#139393 = ORIENTED_EDGE('',*,*,#139394,.T.); +#139394 = EDGE_CURVE('',#139387,#139320,#139395,.T.); +#139395 = LINE('',#139396,#139397); +#139396 = CARTESIAN_POINT('',(99.826456,-117.942103,1.585)); +#139397 = VECTOR('',#139398,1.); +#139398 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#139399 = PLANE('',#139400); +#139400 = AXIS2_PLACEMENT_3D('',#139401,#139402,#139403); +#139401 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139402 = DIRECTION('',(0.,0.,1.)); +#139403 = DIRECTION('',(1.,0.,-0.)); +#139404 = SHELL_BASED_SURFACE_MODEL('',(#139405)); +#139405 = OPEN_SHELL('',(#139406)); +#139406 = ADVANCED_FACE('',(#139407),#139443,.T.); +#139407 = FACE_BOUND('',#139408,.F.); +#139408 = EDGE_LOOP('',(#139409,#139420,#139428,#139437)); +#139409 = ORIENTED_EDGE('',*,*,#139410,.T.); +#139410 = EDGE_CURVE('',#139411,#139413,#139415,.T.); +#139411 = VERTEX_POINT('',#139412); +#139412 = CARTESIAN_POINT('',(129.60165,-118.6681,1.585)); +#139413 = VERTEX_POINT('',#139414); +#139414 = CARTESIAN_POINT('',(129.60165,-118.5481,1.585)); +#139415 = CIRCLE('',#139416,6.000000000042E-02); +#139416 = AXIS2_PLACEMENT_3D('',#139417,#139418,#139419); +#139417 = CARTESIAN_POINT('',(129.60164977441,-118.6081,1.585)); +#139418 = DIRECTION('',(0.,0.,-1.)); +#139419 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#139420 = ORIENTED_EDGE('',*,*,#139421,.T.); +#139421 = EDGE_CURVE('',#139413,#139422,#139424,.T.); +#139422 = VERTEX_POINT('',#139423); +#139423 = CARTESIAN_POINT('',(131.02165,-118.5481,1.585)); +#139424 = LINE('',#139425,#139426); +#139425 = CARTESIAN_POINT('',(129.60165,-118.5481,1.585)); +#139426 = VECTOR('',#139427,1.); +#139427 = DIRECTION('',(1.,0.,0.)); +#139428 = ORIENTED_EDGE('',*,*,#139429,.T.); +#139429 = EDGE_CURVE('',#139422,#139430,#139432,.T.); +#139430 = VERTEX_POINT('',#139431); +#139431 = CARTESIAN_POINT('',(131.02165,-118.6681,1.585)); +#139432 = CIRCLE('',#139433,6.000000000042E-02); +#139433 = AXIS2_PLACEMENT_3D('',#139434,#139435,#139436); +#139434 = CARTESIAN_POINT('',(131.02165022558,-118.6081,1.585)); +#139435 = DIRECTION('',(0.,0.,-1.)); +#139436 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#139437 = ORIENTED_EDGE('',*,*,#139438,.T.); +#139438 = EDGE_CURVE('',#139430,#139411,#139439,.T.); +#139439 = LINE('',#139440,#139441); +#139440 = CARTESIAN_POINT('',(131.02165,-118.6681,1.585)); +#139441 = VECTOR('',#139442,1.); +#139442 = DIRECTION('',(-1.,0.,0.)); +#139443 = PLANE('',#139444); +#139444 = AXIS2_PLACEMENT_3D('',#139445,#139446,#139447); +#139445 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139446 = DIRECTION('',(0.,0.,1.)); +#139447 = DIRECTION('',(1.,0.,-0.)); +#139448 = SHELL_BASED_SURFACE_MODEL('',(#139449)); +#139449 = OPEN_SHELL('',(#139450)); +#139450 = ADVANCED_FACE('',(#139451),#139636,.T.); +#139451 = FACE_BOUND('',#139452,.F.); +#139452 = EDGE_LOOP('',(#139453,#139464,#139472,#139481,#139489,#139498, + #139506,#139515,#139523,#139531,#139539,#139548,#139556,#139565, + #139573,#139582,#139590,#139598,#139606,#139614,#139622,#139630)); +#139453 = ORIENTED_EDGE('',*,*,#139454,.T.); +#139454 = EDGE_CURVE('',#139455,#139457,#139459,.T.); +#139455 = VERTEX_POINT('',#139456); +#139456 = CARTESIAN_POINT('',(184.083078,-117.410381,1.585)); +#139457 = VERTEX_POINT('',#139458); +#139458 = CARTESIAN_POINT('',(184.542841,-117.413178,1.585)); +#139459 = CIRCLE('',#139460,0.460785175821); +#139460 = AXIS2_PLACEMENT_3D('',#139461,#139462,#139463); +#139461 = CARTESIAN_POINT('',(184.31053010897,-117.8111159702,1.585)); +#139462 = DIRECTION('',(0.,0.,-1.)); +#139463 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#139464 = ORIENTED_EDGE('',*,*,#139465,.T.); +#139465 = EDGE_CURVE('',#139457,#139466,#139468,.T.); +#139466 = VERTEX_POINT('',#139467); +#139467 = CARTESIAN_POINT('',(184.611152,-117.481489,1.585)); +#139468 = LINE('',#139469,#139470); +#139469 = CARTESIAN_POINT('',(184.542841,-117.413178,1.585)); +#139470 = VECTOR('',#139471,1.); +#139471 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#139472 = ORIENTED_EDGE('',*,*,#139473,.T.); +#139473 = EDGE_CURVE('',#139466,#139474,#139476,.T.); +#139474 = VERTEX_POINT('',#139475); +#139475 = CARTESIAN_POINT('',(184.495759,-117.57619,1.585)); +#139476 = CIRCLE('',#139477,7.500003178657E-02); +#139477 = AXIS2_PLACEMENT_3D('',#139478,#139479,#139480); +#139478 = CARTESIAN_POINT('',(184.54879156212,-117.5231565,1.585)); +#139479 = DIRECTION('',(0.,0.,-1.)); +#139480 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#139481 = ORIENTED_EDGE('',*,*,#139482,.T.); +#139482 = EDGE_CURVE('',#139474,#139483,#139485,.T.); +#139483 = VERTEX_POINT('',#139484); +#139484 = CARTESIAN_POINT('',(184.460659,-117.54109,1.585)); +#139485 = LINE('',#139486,#139487); +#139486 = CARTESIAN_POINT('',(184.495759,-117.57619,1.585)); +#139487 = VECTOR('',#139488,1.); +#139488 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#139489 = ORIENTED_EDGE('',*,*,#139490,.T.); +#139490 = EDGE_CURVE('',#139483,#139491,#139493,.T.); +#139491 = VERTEX_POINT('',#139492); +#139492 = CARTESIAN_POINT('',(184.160735,-117.54109,1.585)); +#139493 = CIRCLE('',#139494,0.299308637371); +#139494 = AXIS2_PLACEMENT_3D('',#139495,#139496,#139497); +#139495 = CARTESIAN_POINT('',(184.310697,-117.800121,1.585)); +#139496 = DIRECTION('',(0.,0.,1.)); +#139497 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#139498 = ORIENTED_EDGE('',*,*,#139499,.T.); +#139499 = EDGE_CURVE('',#139491,#139500,#139502,.T.); +#139500 = VERTEX_POINT('',#139501); +#139501 = CARTESIAN_POINT('',(184.086622,-117.615203,1.585)); +#139502 = LINE('',#139503,#139504); +#139503 = CARTESIAN_POINT('',(184.160735,-117.54109,1.585)); +#139504 = VECTOR('',#139505,1.); +#139505 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#139506 = ORIENTED_EDGE('',*,*,#139507,.T.); +#139507 = EDGE_CURVE('',#139500,#139508,#139510,.T.); +#139508 = VERTEX_POINT('',#139509); +#139509 = CARTESIAN_POINT('',(184.004745,-117.990113,1.585)); +#139510 = CIRCLE('',#139511,0.611712714363); +#139511 = AXIS2_PLACEMENT_3D('',#139512,#139513,#139514); +#139512 = CARTESIAN_POINT('',(184.61315027521,-117.9265876822,1.585)); +#139513 = DIRECTION('',(0.,0.,1.)); +#139514 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#139515 = ORIENTED_EDGE('',*,*,#139516,.T.); +#139516 = EDGE_CURVE('',#139508,#139517,#139519,.T.); +#139517 = VERTEX_POINT('',#139518); +#139518 = CARTESIAN_POINT('',(184.048128,-118.163647,1.585)); +#139519 = LINE('',#139520,#139521); +#139520 = CARTESIAN_POINT('',(184.004745,-117.990113,1.585)); +#139521 = VECTOR('',#139522,1.); +#139522 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#139523 = ORIENTED_EDGE('',*,*,#139524,.T.); +#139524 = EDGE_CURVE('',#139517,#139525,#139527,.T.); +#139525 = VERTEX_POINT('',#139526); +#139526 = CARTESIAN_POINT('',(184.086622,-118.240634,1.585)); +#139527 = LINE('',#139528,#139529); +#139528 = CARTESIAN_POINT('',(184.048128,-118.163647,1.585)); +#139529 = VECTOR('',#139530,1.); +#139530 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#139531 = ORIENTED_EDGE('',*,*,#139532,.T.); +#139532 = EDGE_CURVE('',#139525,#139533,#139535,.T.); +#139533 = VERTEX_POINT('',#139534); +#139534 = CARTESIAN_POINT('',(184.160735,-118.314748,1.585)); +#139535 = LINE('',#139536,#139537); +#139536 = CARTESIAN_POINT('',(184.086622,-118.240634,1.585)); +#139537 = VECTOR('',#139538,1.); +#139538 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#139539 = ORIENTED_EDGE('',*,*,#139540,.T.); +#139540 = EDGE_CURVE('',#139533,#139541,#139543,.T.); +#139541 = VERTEX_POINT('',#139542); +#139542 = CARTESIAN_POINT('',(184.460659,-118.314747,1.585)); +#139543 = CIRCLE('',#139544,0.299305962385); +#139544 = AXIS2_PLACEMENT_3D('',#139545,#139546,#139547); +#139545 = CARTESIAN_POINT('',(184.31069613635,-118.0557195909,1.585)); +#139546 = DIRECTION('',(0.,0.,1.)); +#139547 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#139548 = ORIENTED_EDGE('',*,*,#139549,.T.); +#139549 = EDGE_CURVE('',#139541,#139550,#139552,.T.); +#139550 = VERTEX_POINT('',#139551); +#139551 = CARTESIAN_POINT('',(184.507124,-118.27032,1.585)); +#139552 = LINE('',#139553,#139554); +#139553 = CARTESIAN_POINT('',(184.460659,-118.314747,1.585)); +#139554 = VECTOR('',#139555,1.); +#139555 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#139556 = ORIENTED_EDGE('',*,*,#139557,.T.); +#139557 = EDGE_CURVE('',#139550,#139558,#139560,.T.); +#139558 = VERTEX_POINT('',#139559); +#139559 = CARTESIAN_POINT('',(184.601825,-118.385713,1.585)); +#139560 = CIRCLE('',#139561,7.499993690111E-02); +#139561 = AXIS2_PLACEMENT_3D('',#139562,#139563,#139564); +#139562 = CARTESIAN_POINT('',(184.5487922483,-118.3326798237,1.585)); +#139563 = DIRECTION('',(0.,0.,-1.)); +#139564 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#139565 = ORIENTED_EDGE('',*,*,#139566,.T.); +#139566 = EDGE_CURVE('',#139558,#139567,#139569,.T.); +#139567 = VERTEX_POINT('',#139568); +#139568 = CARTESIAN_POINT('',(184.538315,-118.445457,1.585)); +#139569 = LINE('',#139570,#139571); +#139570 = CARTESIAN_POINT('',(184.601825,-118.385713,1.585)); +#139571 = VECTOR('',#139572,1.); +#139572 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#139573 = ORIENTED_EDGE('',*,*,#139574,.T.); +#139574 = EDGE_CURVE('',#139567,#139575,#139577,.T.); +#139575 = VERTEX_POINT('',#139576); +#139576 = CARTESIAN_POINT('',(184.078553,-118.442661,1.585)); +#139577 = CIRCLE('',#139578,0.461067828848); +#139578 = AXIS2_PLACEMENT_3D('',#139579,#139580,#139581); +#139579 = CARTESIAN_POINT('',(184.31086451268,-118.0443961335,1.585)); +#139580 = DIRECTION('',(-0.,0.,-1.)); +#139581 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#139582 = ORIENTED_EDGE('',*,*,#139583,.T.); +#139583 = EDGE_CURVE('',#139575,#139584,#139586,.T.); +#139584 = VERTEX_POINT('',#139585); +#139585 = CARTESIAN_POINT('',(183.961864,-118.324898,1.585)); +#139586 = LINE('',#139587,#139588); +#139587 = CARTESIAN_POINT('',(184.078553,-118.442661,1.585)); +#139588 = VECTOR('',#139589,1.); +#139589 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#139590 = ORIENTED_EDGE('',*,*,#139591,.T.); +#139591 = EDGE_CURVE('',#139584,#139592,#139594,.T.); +#139592 = VERTEX_POINT('',#139593); +#139593 = CARTESIAN_POINT('',(183.904603,-118.208013,1.585)); +#139594 = LINE('',#139595,#139596); +#139595 = CARTESIAN_POINT('',(183.961864,-118.324898,1.585)); +#139596 = VECTOR('',#139597,1.); +#139597 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#139598 = ORIENTED_EDGE('',*,*,#139599,.T.); +#139599 = EDGE_CURVE('',#139592,#139600,#139602,.T.); +#139600 = VERTEX_POINT('',#139601); +#139601 = CARTESIAN_POINT('',(183.854745,-117.999347,1.585)); +#139602 = LINE('',#139603,#139604); +#139603 = CARTESIAN_POINT('',(183.904603,-118.208013,1.585)); +#139604 = VECTOR('',#139605,1.); +#139605 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#139606 = ORIENTED_EDGE('',*,*,#139607,.T.); +#139607 = EDGE_CURVE('',#139600,#139608,#139610,.T.); +#139608 = VERTEX_POINT('',#139609); +#139609 = CARTESIAN_POINT('',(183.856984,-117.8383,1.585)); +#139610 = LINE('',#139611,#139612); +#139611 = CARTESIAN_POINT('',(183.854745,-117.999347,1.585)); +#139612 = VECTOR('',#139613,1.); +#139613 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#139614 = ORIENTED_EDGE('',*,*,#139615,.T.); +#139615 = EDGE_CURVE('',#139608,#139616,#139618,.T.); +#139616 = VERTEX_POINT('',#139617); +#139617 = CARTESIAN_POINT('',(183.910282,-117.632473,1.585)); +#139618 = LINE('',#139619,#139620); +#139619 = CARTESIAN_POINT('',(183.856984,-117.8383,1.585)); +#139620 = VECTOR('',#139621,1.); +#139621 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#139622 = ORIENTED_EDGE('',*,*,#139623,.T.); +#139623 = EDGE_CURVE('',#139616,#139624,#139626,.T.); +#139624 = VERTEX_POINT('',#139625); +#139625 = CARTESIAN_POINT('',(183.967231,-117.523492,1.585)); +#139626 = LINE('',#139627,#139628); +#139627 = CARTESIAN_POINT('',(183.910282,-117.632473,1.585)); +#139628 = VECTOR('',#139629,1.); +#139629 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#139630 = ORIENTED_EDGE('',*,*,#139631,.T.); +#139631 = EDGE_CURVE('',#139624,#139455,#139632,.T.); +#139632 = LINE('',#139633,#139634); +#139633 = CARTESIAN_POINT('',(183.967231,-117.523492,1.585)); +#139634 = VECTOR('',#139635,1.); +#139635 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#139636 = PLANE('',#139637); +#139637 = AXIS2_PLACEMENT_3D('',#139638,#139639,#139640); +#139638 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139639 = DIRECTION('',(0.,0.,1.)); +#139640 = DIRECTION('',(1.,0.,-0.)); +#139641 = SHELL_BASED_SURFACE_MODEL('',(#139642)); +#139642 = OPEN_SHELL('',(#139643)); +#139643 = ADVANCED_FACE('',(#139644),#139779,.T.); +#139644 = FACE_BOUND('',#139645,.F.); +#139645 = EDGE_LOOP('',(#139646,#139657,#139665,#139673,#139681,#139690, + #139698,#139706,#139715,#139723,#139731,#139740,#139748,#139756, + #139765,#139773)); +#139646 = ORIENTED_EDGE('',*,*,#139647,.T.); +#139647 = EDGE_CURVE('',#139648,#139650,#139652,.T.); +#139648 = VERTEX_POINT('',#139649); +#139649 = CARTESIAN_POINT('',(185.121857,-117.321051,1.585)); +#139650 = VERTEX_POINT('',#139651); +#139651 = CARTESIAN_POINT('',(185.238991,-117.404018,1.585)); +#139652 = CIRCLE('',#139653,7.499955990671E-02); +#139653 = AXIS2_PLACEMENT_3D('',#139654,#139655,#139656); +#139654 = CARTESIAN_POINT('',(185.16784050095,-117.3803000643,1.585)); +#139655 = DIRECTION('',(0.,0.,-1.)); +#139656 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#139657 = ORIENTED_EDGE('',*,*,#139658,.T.); +#139658 = EDGE_CURVE('',#139650,#139659,#139661,.T.); +#139659 = VERTEX_POINT('',#139660); +#139660 = CARTESIAN_POINT('',(185.033802,-118.019585,1.585)); +#139661 = LINE('',#139662,#139663); +#139662 = CARTESIAN_POINT('',(185.238991,-117.404018,1.585)); +#139663 = VECTOR('',#139664,1.); +#139664 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#139665 = ORIENTED_EDGE('',*,*,#139666,.T.); +#139666 = EDGE_CURVE('',#139659,#139667,#139669,.T.); +#139667 = VERTEX_POINT('',#139668); +#139668 = CARTESIAN_POINT('',(185.330935,-118.019585,1.585)); +#139669 = LINE('',#139670,#139671); +#139670 = CARTESIAN_POINT('',(185.033802,-118.019585,1.585)); +#139671 = VECTOR('',#139672,1.); +#139672 = DIRECTION('',(1.,0.,0.)); +#139673 = ORIENTED_EDGE('',*,*,#139674,.T.); +#139674 = EDGE_CURVE('',#139667,#139675,#139677,.T.); +#139675 = VERTEX_POINT('',#139676); +#139676 = CARTESIAN_POINT('',(185.332376,-117.74662,1.585)); +#139677 = LINE('',#139678,#139679); +#139678 = CARTESIAN_POINT('',(185.330935,-118.019585,1.585)); +#139679 = VECTOR('',#139680,1.); +#139680 = DIRECTION('',(5.278991523253E-03,0.999986066027,0.)); +#139681 = ORIENTED_EDGE('',*,*,#139682,.T.); +#139682 = EDGE_CURVE('',#139675,#139683,#139685,.T.); +#139683 = VERTEX_POINT('',#139684); +#139684 = CARTESIAN_POINT('',(185.480935,-117.761252,1.585)); +#139685 = CIRCLE('',#139686,7.500006711463E-02); +#139686 = AXIS2_PLACEMENT_3D('',#139687,#139688,#139689); +#139687 = CARTESIAN_POINT('',(185.40593493288,-117.7612519328,1.585)); +#139688 = DIRECTION('',(0.,0.,-1.)); +#139689 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#139690 = ORIENTED_EDGE('',*,*,#139691,.T.); +#139691 = EDGE_CURVE('',#139683,#139692,#139694,.T.); +#139692 = VERTEX_POINT('',#139693); +#139693 = CARTESIAN_POINT('',(185.480935,-118.019585,1.585)); +#139694 = LINE('',#139695,#139696); +#139695 = CARTESIAN_POINT('',(185.480935,-117.761252,1.585)); +#139696 = VECTOR('',#139697,1.); +#139697 = DIRECTION('',(0.,-1.,0.)); +#139698 = ORIENTED_EDGE('',*,*,#139699,.T.); +#139699 = EDGE_CURVE('',#139692,#139700,#139702,.T.); +#139700 = VERTEX_POINT('',#139701); +#139701 = CARTESIAN_POINT('',(185.563424,-118.021026,1.585)); +#139702 = LINE('',#139703,#139704); +#139703 = CARTESIAN_POINT('',(185.480935,-118.019585,1.585)); +#139704 = VECTOR('',#139705,1.); +#139705 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#139706 = ORIENTED_EDGE('',*,*,#139707,.T.); +#139707 = EDGE_CURVE('',#139700,#139708,#139710,.T.); +#139708 = VERTEX_POINT('',#139709); +#139709 = CARTESIAN_POINT('',(185.548792,-118.169585,1.585)); +#139710 = CIRCLE('',#139711,7.500006711462E-02); +#139711 = AXIS2_PLACEMENT_3D('',#139712,#139713,#139714); +#139712 = CARTESIAN_POINT('',(185.54879206711,-118.0945849328,1.585)); +#139713 = DIRECTION('',(0.,0.,-1.)); +#139714 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#139715 = ORIENTED_EDGE('',*,*,#139716,.T.); +#139716 = EDGE_CURVE('',#139708,#139717,#139719,.T.); +#139717 = VERTEX_POINT('',#139718); +#139718 = CARTESIAN_POINT('',(185.480935,-118.169585,1.585)); +#139719 = LINE('',#139720,#139721); +#139720 = CARTESIAN_POINT('',(185.548792,-118.169585,1.585)); +#139721 = VECTOR('',#139722,1.); +#139722 = DIRECTION('',(-1.,0.,0.)); +#139723 = ORIENTED_EDGE('',*,*,#139724,.T.); +#139724 = EDGE_CURVE('',#139717,#139725,#139727,.T.); +#139725 = VERTEX_POINT('',#139726); +#139726 = CARTESIAN_POINT('',(185.479494,-118.442551,1.585)); +#139727 = LINE('',#139728,#139729); +#139728 = CARTESIAN_POINT('',(185.480935,-118.169585,1.585)); +#139729 = VECTOR('',#139730,1.); +#139730 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#139731 = ORIENTED_EDGE('',*,*,#139732,.T.); +#139732 = EDGE_CURVE('',#139725,#139733,#139735,.T.); +#139733 = VERTEX_POINT('',#139734); +#139734 = CARTESIAN_POINT('',(185.330935,-118.427919,1.585)); +#139735 = CIRCLE('',#139736,7.500006711462E-02); +#139736 = AXIS2_PLACEMENT_3D('',#139737,#139738,#139739); +#139737 = CARTESIAN_POINT('',(185.40593506711,-118.4279190671,1.585)); +#139738 = DIRECTION('',(-0.,0.,-1.)); +#139739 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#139740 = ORIENTED_EDGE('',*,*,#139741,.T.); +#139741 = EDGE_CURVE('',#139733,#139742,#139744,.T.); +#139742 = VERTEX_POINT('',#139743); +#139743 = CARTESIAN_POINT('',(185.330935,-118.169585,1.585)); +#139744 = LINE('',#139745,#139746); +#139745 = CARTESIAN_POINT('',(185.330935,-118.427919,1.585)); +#139746 = VECTOR('',#139747,1.); +#139747 = DIRECTION('',(0.,1.,0.)); +#139748 = ORIENTED_EDGE('',*,*,#139749,.T.); +#139749 = EDGE_CURVE('',#139742,#139750,#139752,.T.); +#139750 = VERTEX_POINT('',#139751); +#139751 = CARTESIAN_POINT('',(184.915113,-118.168144,1.585)); +#139752 = LINE('',#139753,#139754); +#139753 = CARTESIAN_POINT('',(185.330935,-118.169585,1.585)); +#139754 = VECTOR('',#139755,1.); +#139755 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#139756 = ORIENTED_EDGE('',*,*,#139757,.T.); +#139757 = EDGE_CURVE('',#139750,#139758,#139760,.T.); +#139758 = VERTEX_POINT('',#139759); +#139759 = CARTESIAN_POINT('',(184.858594,-118.070868,1.585)); +#139760 = CIRCLE('',#139761,7.499997045039E-02); +#139761 = AXIS2_PLACEMENT_3D('',#139762,#139763,#139764); +#139762 = CARTESIAN_POINT('',(184.92974517257,-118.0945852133,1.585)); +#139763 = DIRECTION('',(0.,0.,-1.)); +#139764 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#139765 = ORIENTED_EDGE('',*,*,#139766,.T.); +#139766 = EDGE_CURVE('',#139758,#139767,#139769,.T.); +#139767 = VERTEX_POINT('',#139768); +#139768 = CARTESIAN_POINT('',(185.102683,-117.343158,1.585)); +#139769 = LINE('',#139770,#139771); +#139770 = CARTESIAN_POINT('',(184.858594,-118.070868,1.585)); +#139771 = VECTOR('',#139772,1.); +#139772 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#139773 = ORIENTED_EDGE('',*,*,#139774,.T.); +#139774 = EDGE_CURVE('',#139767,#139648,#139775,.T.); +#139775 = LINE('',#139776,#139777); +#139776 = CARTESIAN_POINT('',(185.102683,-117.343158,1.585)); +#139777 = VECTOR('',#139778,1.); +#139778 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#139779 = PLANE('',#139780); +#139780 = AXIS2_PLACEMENT_3D('',#139781,#139782,#139783); +#139781 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139782 = DIRECTION('',(0.,0.,1.)); +#139783 = DIRECTION('',(1.,0.,-0.)); +#139784 = SHELL_BASED_SURFACE_MODEL('',(#139785)); +#139785 = OPEN_SHELL('',(#139786)); +#139786 = ADVANCED_FACE('',(#139787),#139973,.T.); +#139787 = FACE_BOUND('',#139788,.F.); +#139788 = EDGE_LOOP('',(#139789,#139800,#139808,#139817,#139825,#139833, + #139842,#139850,#139859,#139867,#139875,#139883,#139892,#139900, + #139909,#139917,#139926,#139934,#139942,#139950,#139959,#139967)); +#139789 = ORIENTED_EDGE('',*,*,#139790,.T.); +#139790 = EDGE_CURVE('',#139791,#139793,#139795,.T.); +#139791 = VERTEX_POINT('',#139792); +#139792 = CARTESIAN_POINT('',(185.819875,-117.501478,1.585)); +#139793 = VERTEX_POINT('',#139794); +#139794 = CARTESIAN_POINT('',(185.834507,-117.352919,1.585)); +#139795 = CIRCLE('',#139796,7.500006711464E-02); +#139796 = AXIS2_PLACEMENT_3D('',#139797,#139798,#139799); +#139797 = CARTESIAN_POINT('',(185.83450693288,-117.4279190671,1.585)); +#139798 = DIRECTION('',(0.,0.,-1.)); +#139799 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#139800 = ORIENTED_EDGE('',*,*,#139801,.T.); +#139801 = EDGE_CURVE('',#139793,#139802,#139804,.T.); +#139802 = VERTEX_POINT('',#139803); +#139803 = CARTESIAN_POINT('',(186.461292,-117.353681,1.585)); +#139804 = LINE('',#139805,#139806); +#139805 = CARTESIAN_POINT('',(185.834507,-117.352919,1.585)); +#139806 = VECTOR('',#139807,1.); +#139807 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#139808 = ORIENTED_EDGE('',*,*,#139809,.T.); +#139809 = EDGE_CURVE('',#139802,#139810,#139812,.T.); +#139810 = VERTEX_POINT('',#139811); +#139811 = CARTESIAN_POINT('',(186.527113,-117.442551,1.585)); +#139812 = CIRCLE('',#139813,7.447391611624E-02); +#139813 = AXIS2_PLACEMENT_3D('',#139814,#139815,#139816); +#139814 = CARTESIAN_POINT('',(186.45411292664,-117.4278080874,1.585)); +#139815 = DIRECTION('',(0.,0.,-1.)); +#139816 = DIRECTION('',(9.639715124738E-02,0.995342950561,0.)); +#139817 = ORIENTED_EDGE('',*,*,#139818,.T.); +#139818 = EDGE_CURVE('',#139810,#139819,#139821,.T.); +#139819 = VERTEX_POINT('',#139820); +#139820 = CARTESIAN_POINT('',(186.509997,-117.477307,1.585)); +#139821 = LINE('',#139822,#139823); +#139822 = CARTESIAN_POINT('',(186.527113,-117.442551,1.585)); +#139823 = VECTOR('',#139824,1.); +#139824 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#139825 = ORIENTED_EDGE('',*,*,#139826,.T.); +#139826 = EDGE_CURVE('',#139819,#139827,#139829,.T.); +#139827 = VERTEX_POINT('',#139828); +#139828 = CARTESIAN_POINT('',(186.283101,-117.736616,1.585)); +#139829 = LINE('',#139830,#139831); +#139830 = CARTESIAN_POINT('',(186.509997,-117.477307,1.585)); +#139831 = VECTOR('',#139832,1.); +#139832 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#139833 = ORIENTED_EDGE('',*,*,#139834,.T.); +#139834 = EDGE_CURVE('',#139827,#139835,#139837,.T.); +#139835 = VERTEX_POINT('',#139836); +#139836 = CARTESIAN_POINT('',(186.527113,-117.984715,1.585)); +#139837 = CIRCLE('',#139838,0.348520834816); +#139838 = AXIS2_PLACEMENT_3D('',#139839,#139840,#139841); +#139839 = CARTESIAN_POINT('',(186.1898076174,-118.0724181993,1.585)); +#139840 = DIRECTION('',(0.,0.,-1.)); +#139841 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#139842 = ORIENTED_EDGE('',*,*,#139843,.T.); +#139843 = EDGE_CURVE('',#139835,#139844,#139846,.T.); +#139844 = VERTEX_POINT('',#139845); +#139845 = CARTESIAN_POINT('',(186.525891,-118.257252,1.585)); +#139846 = LINE('',#139847,#139848); +#139847 = CARTESIAN_POINT('',(186.527113,-117.984715,1.585)); +#139848 = VECTOR('',#139849,1.); +#139849 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#139850 = ORIENTED_EDGE('',*,*,#139851,.T.); +#139851 = EDGE_CURVE('',#139844,#139852,#139854,.T.); +#139852 = VERTEX_POINT('',#139853); +#139853 = CARTESIAN_POINT('',(186.27771,-118.501478,1.585)); +#139854 = CIRCLE('',#139855,0.348635327447); +#139855 = AXIS2_PLACEMENT_3D('',#139856,#139857,#139858); +#139856 = CARTESIAN_POINT('',(186.18993848129,-118.1640720841,1.585)); +#139857 = DIRECTION('',(0.,0.,-1.)); +#139858 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#139859 = ORIENTED_EDGE('',*,*,#139860,.T.); +#139860 = EDGE_CURVE('',#139852,#139861,#139863,.T.); +#139861 = VERTEX_POINT('',#139862); +#139862 = CARTESIAN_POINT('',(185.957554,-118.500256,1.585)); +#139863 = LINE('',#139864,#139865); +#139864 = CARTESIAN_POINT('',(186.27771,-118.501478,1.585)); +#139865 = VECTOR('',#139866,1.); +#139866 = DIRECTION('',(-0.999992715758,3.816861463376E-03,0.)); +#139867 = ORIENTED_EDGE('',*,*,#139868,.T.); +#139868 = EDGE_CURVE('',#139861,#139869,#139871,.T.); +#139869 = VERTEX_POINT('',#139870); +#139870 = CARTESIAN_POINT('',(185.834841,-118.43805,1.585)); +#139871 = LINE('',#139872,#139873); +#139872 = CARTESIAN_POINT('',(185.957554,-118.500256,1.585)); +#139873 = VECTOR('',#139874,1.); +#139874 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#139875 = ORIENTED_EDGE('',*,*,#139876,.T.); +#139876 = EDGE_CURVE('',#139869,#139877,#139879,.T.); +#139877 = VERTEX_POINT('',#139878); +#139878 = CARTESIAN_POINT('',(185.772146,-118.374347,1.585)); +#139879 = LINE('',#139880,#139881); +#139880 = CARTESIAN_POINT('',(185.834841,-118.43805,1.585)); +#139881 = VECTOR('',#139882,1.); +#139882 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#139883 = ORIENTED_EDGE('',*,*,#139884,.T.); +#139884 = EDGE_CURVE('',#139877,#139885,#139887,.T.); +#139885 = VERTEX_POINT('',#139886); +#139886 = CARTESIAN_POINT('',(185.887541,-118.279648,1.585)); +#139887 = CIRCLE('',#139888,7.50001266804E-02); +#139888 = AXIS2_PLACEMENT_3D('',#139889,#139890,#139891); +#139889 = CARTESIAN_POINT('',(185.83450705199,-118.3326802483,1.585)); +#139890 = DIRECTION('',(0.,0.,-1.)); +#139891 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#139892 = ORIENTED_EDGE('',*,*,#139893,.T.); +#139893 = EDGE_CURVE('',#139885,#139894,#139896,.T.); +#139894 = VERTEX_POINT('',#139895); +#139895 = CARTESIAN_POINT('',(185.926553,-118.318661,1.585)); +#139896 = LINE('',#139897,#139898); +#139897 = CARTESIAN_POINT('',(185.887541,-118.279648,1.585)); +#139898 = VECTOR('',#139899,1.); +#139899 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#139900 = ORIENTED_EDGE('',*,*,#139901,.T.); +#139901 = EDGE_CURVE('',#139894,#139902,#139904,.T.); +#139902 = VERTEX_POINT('',#139903); +#139903 = CARTESIAN_POINT('',(186.313888,-118.318661,1.585)); +#139904 = CIRCLE('',#139905,0.358502380266); +#139905 = AXIS2_PLACEMENT_3D('',#139906,#139907,#139908); +#139906 = CARTESIAN_POINT('',(186.1202205,-118.016971,1.585)); +#139907 = DIRECTION('',(0.,0.,1.)); +#139908 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#139909 = ORIENTED_EDGE('',*,*,#139910,.T.); +#139910 = EDGE_CURVE('',#139902,#139911,#139913,.T.); +#139911 = VERTEX_POINT('',#139912); +#139912 = CARTESIAN_POINT('',(186.344295,-118.288253,1.585)); +#139913 = LINE('',#139914,#139915); +#139914 = CARTESIAN_POINT('',(186.313888,-118.318661,1.585)); +#139915 = VECTOR('',#139916,1.); +#139916 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#139917 = ORIENTED_EDGE('',*,*,#139918,.T.); +#139918 = EDGE_CURVE('',#139911,#139919,#139921,.T.); +#139919 = VERTEX_POINT('',#139920); +#139920 = CARTESIAN_POINT('',(186.344296,-117.948536,1.585)); +#139921 = CIRCLE('',#139922,0.305616146029); +#139922 = AXIS2_PLACEMENT_3D('',#139923,#139924,#139925); +#139923 = CARTESIAN_POINT('',(186.09022992049,-118.1183937521,1.585)); +#139924 = DIRECTION('',(0.,-0.,1.)); +#139925 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#139926 = ORIENTED_EDGE('',*,*,#139927,.T.); +#139927 = EDGE_CURVE('',#139919,#139928,#139930,.T.); +#139928 = VERTEX_POINT('',#139929); +#139929 = CARTESIAN_POINT('',(186.313889,-117.918129,1.585)); +#139930 = LINE('',#139931,#139932); +#139931 = CARTESIAN_POINT('',(186.344296,-117.948536,1.585)); +#139932 = VECTOR('',#139933,1.); +#139933 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#139934 = ORIENTED_EDGE('',*,*,#139935,.T.); +#139935 = EDGE_CURVE('',#139928,#139936,#139938,.T.); +#139936 = VERTEX_POINT('',#139937); +#139937 = CARTESIAN_POINT('',(186.245373,-117.883871,1.585)); +#139938 = LINE('',#139939,#139940); +#139939 = CARTESIAN_POINT('',(186.313889,-117.918129,1.585)); +#139940 = VECTOR('',#139941,1.); +#139941 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#139942 = ORIENTED_EDGE('',*,*,#139943,.T.); +#139943 = EDGE_CURVE('',#139936,#139944,#139946,.T.); +#139944 = VERTEX_POINT('',#139945); +#139945 = CARTESIAN_POINT('',(186.105589,-117.88243,1.585)); +#139946 = LINE('',#139947,#139948); +#139947 = CARTESIAN_POINT('',(186.245373,-117.883871,1.585)); +#139948 = VECTOR('',#139949,1.); +#139949 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#139950 = ORIENTED_EDGE('',*,*,#139951,.T.); +#139951 = EDGE_CURVE('',#139944,#139952,#139954,.T.); +#139952 = VERTEX_POINT('',#139953); +#139953 = CARTESIAN_POINT('',(186.063778,-117.759483,1.585)); +#139954 = CIRCLE('',#139955,7.500015628753E-02); +#139955 = AXIS2_PLACEMENT_3D('',#139956,#139957,#139958); +#139956 = CARTESIAN_POINT('',(186.12022128432,-117.8088710461,1.585)); +#139957 = DIRECTION('',(0.,0.,-1.)); +#139958 = DIRECTION('',(-0.195096717784,-0.980784008184,-0.)); +#139959 = ORIENTED_EDGE('',*,*,#139960,.T.); +#139960 = EDGE_CURVE('',#139952,#139961,#139963,.T.); +#139961 = VERTEX_POINT('',#139962); +#139962 = CARTESIAN_POINT('',(186.288272,-117.502919,1.585)); +#139963 = LINE('',#139964,#139965); +#139964 = CARTESIAN_POINT('',(186.063778,-117.759483,1.585)); +#139965 = VECTOR('',#139966,1.); +#139966 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#139967 = ORIENTED_EDGE('',*,*,#139968,.T.); +#139968 = EDGE_CURVE('',#139961,#139791,#139969,.T.); +#139969 = LINE('',#139970,#139971); +#139970 = CARTESIAN_POINT('',(186.288272,-117.502919,1.585)); +#139971 = VECTOR('',#139972,1.); +#139972 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#139973 = PLANE('',#139974); +#139974 = AXIS2_PLACEMENT_3D('',#139975,#139976,#139977); +#139975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139976 = DIRECTION('',(0.,0.,1.)); +#139977 = DIRECTION('',(1.,0.,-0.)); +#139978 = SHELL_BASED_SURFACE_MODEL('',(#139979)); +#139979 = OPEN_SHELL('',(#139980)); +#139980 = ADVANCED_FACE('',(#139981),#140041,.T.); +#139981 = FACE_BOUND('',#139982,.F.); +#139982 = EDGE_LOOP('',(#139983,#139994,#140002,#140011,#140019,#140027, + #140035)); +#139983 = ORIENTED_EDGE('',*,*,#139984,.T.); +#139984 = EDGE_CURVE('',#139985,#139987,#139989,.T.); +#139985 = VERTEX_POINT('',#139986); +#139986 = CARTESIAN_POINT('',(122.71165,-117.7831,1.585)); +#139987 = VERTEX_POINT('',#139988); +#139988 = CARTESIAN_POINT('',(122.669224,-117.680674,1.585)); +#139989 = CIRCLE('',#139990,6.000000000553E-02); +#139990 = AXIS2_PLACEMENT_3D('',#139991,#139992,#139993); +#139991 = CARTESIAN_POINT('',(122.71165081374,-117.7231,1.585)); +#139992 = DIRECTION('',(0.,0.,-1.)); +#139993 = DIRECTION('',(-1.356243828229E-05,-0.999999999908,-0.)); +#139994 = ORIENTED_EDGE('',*,*,#139995,.T.); +#139995 = EDGE_CURVE('',#139987,#139996,#139998,.T.); +#139996 = VERTEX_POINT('',#139997); +#139997 = CARTESIAN_POINT('',(122.949224,-117.400674,1.585)); +#139998 = LINE('',#139999,#140000); +#139999 = CARTESIAN_POINT('',(122.669224,-117.680674,1.585)); +#140000 = VECTOR('',#140001,1.); +#140001 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140002 = ORIENTED_EDGE('',*,*,#140003,.T.); +#140003 = EDGE_CURVE('',#139996,#140004,#140006,.T.); +#140004 = VERTEX_POINT('',#140005); +#140005 = CARTESIAN_POINT('',(123.05165,-117.4431,1.585)); +#140006 = CIRCLE('',#140007,6.000000000552E-02); +#140007 = AXIS2_PLACEMENT_3D('',#140008,#140009,#140010); +#140008 = CARTESIAN_POINT('',(122.99165,-117.4431008137,1.585)); +#140009 = DIRECTION('',(0.,0.,-1.)); +#140010 = DIRECTION('',(-0.707099999935,0.707113562373,0.)); +#140011 = ORIENTED_EDGE('',*,*,#140012,.T.); +#140012 = EDGE_CURVE('',#140004,#140013,#140015,.T.); +#140013 = VERTEX_POINT('',#140014); +#140014 = CARTESIAN_POINT('',(123.05165,-117.7231,1.585)); +#140015 = LINE('',#140016,#140017); +#140016 = CARTESIAN_POINT('',(123.05165,-117.4431,1.585)); +#140017 = VECTOR('',#140018,1.); +#140018 = DIRECTION('',(0.,-1.,0.)); +#140019 = ORIENTED_EDGE('',*,*,#140020,.T.); +#140020 = EDGE_CURVE('',#140013,#140021,#140023,.T.); +#140021 = VERTEX_POINT('',#140022); +#140022 = CARTESIAN_POINT('',(123.034076,-117.765526,1.585)); +#140023 = LINE('',#140024,#140025); +#140024 = CARTESIAN_POINT('',(123.05165,-117.7231,1.585)); +#140025 = VECTOR('',#140026,1.); +#140026 = DIRECTION('',(-0.382694127414,-0.923875102405,0.)); +#140027 = ORIENTED_EDGE('',*,*,#140028,.T.); +#140028 = EDGE_CURVE('',#140021,#140029,#140031,.T.); +#140029 = VERTEX_POINT('',#140030); +#140030 = CARTESIAN_POINT('',(122.99165,-117.7831,1.585)); +#140031 = LINE('',#140032,#140033); +#140032 = CARTESIAN_POINT('',(123.034076,-117.765526,1.585)); +#140033 = VECTOR('',#140034,1.); +#140034 = DIRECTION('',(-0.923875102404,-0.382694127414,0.)); +#140035 = ORIENTED_EDGE('',*,*,#140036,.T.); +#140036 = EDGE_CURVE('',#140029,#139985,#140037,.T.); +#140037 = LINE('',#140038,#140039); +#140038 = CARTESIAN_POINT('',(122.99165,-117.7831,1.585)); +#140039 = VECTOR('',#140040,1.); +#140040 = DIRECTION('',(-1.,0.,0.)); +#140041 = PLANE('',#140042); +#140042 = AXIS2_PLACEMENT_3D('',#140043,#140044,#140045); +#140043 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140044 = DIRECTION('',(0.,0.,1.)); +#140045 = DIRECTION('',(1.,0.,-0.)); +#140046 = SHELL_BASED_SURFACE_MODEL('',(#140047)); +#140047 = OPEN_SHELL('',(#140048)); +#140048 = ADVANCED_FACE('',(#140049),#140119,.T.); +#140049 = FACE_BOUND('',#140050,.F.); +#140050 = EDGE_LOOP('',(#140051,#140062,#140070,#140079,#140087,#140096, + #140104,#140113)); +#140051 = ORIENTED_EDGE('',*,*,#140052,.T.); +#140052 = EDGE_CURVE('',#140053,#140055,#140057,.T.); +#140053 = VERTEX_POINT('',#140054); +#140054 = CARTESIAN_POINT('',(82.753265,-117.039565,1.585)); +#140055 = VERTEX_POINT('',#140056); +#140056 = CARTESIAN_POINT('',(82.919936,-117.039565,1.585)); +#140057 = CIRCLE('',#140058,0.150002924038); +#140058 = AXIS2_PLACEMENT_3D('',#140059,#140060,#140061); +#140059 = CARTESIAN_POINT('',(82.8366005,-117.1642889818,1.585)); +#140060 = DIRECTION('',(0.,0.,-1.)); +#140061 = DIRECTION('',(-0.555559170159,0.831477004163,0.)); +#140062 = ORIENTED_EDGE('',*,*,#140063,.T.); +#140063 = EDGE_CURVE('',#140055,#140064,#140066,.T.); +#140064 = VERTEX_POINT('',#140065); +#140065 = CARTESIAN_POINT('',(83.08513,-117.204759,1.585)); +#140066 = LINE('',#140067,#140068); +#140067 = CARTESIAN_POINT('',(82.919936,-117.039565,1.585)); +#140068 = VECTOR('',#140069,1.); +#140069 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140070 = ORIENTED_EDGE('',*,*,#140071,.T.); +#140071 = EDGE_CURVE('',#140064,#140072,#140074,.T.); +#140072 = VERTEX_POINT('',#140073); +#140073 = CARTESIAN_POINT('',(83.08513,-117.37143,1.585)); +#140074 = CIRCLE('',#140075,0.150002924038); +#140075 = AXIS2_PLACEMENT_3D('',#140076,#140077,#140078); +#140076 = CARTESIAN_POINT('',(82.960406018105,-117.2880945,1.585)); +#140077 = DIRECTION('',(0.,0.,-1.)); +#140078 = DIRECTION('',(0.831477004163,0.555559170159,0.)); +#140079 = ORIENTED_EDGE('',*,*,#140080,.T.); +#140080 = EDGE_CURVE('',#140072,#140081,#140083,.T.); +#140081 = VERTEX_POINT('',#140082); +#140082 = CARTESIAN_POINT('',(82.919936,-117.536626,1.585)); +#140083 = LINE('',#140084,#140085); +#140084 = CARTESIAN_POINT('',(83.08513,-117.37143,1.585)); +#140085 = VECTOR('',#140086,1.); +#140086 = DIRECTION('',(-0.707102500737,-0.707111061611,0.)); +#140087 = ORIENTED_EDGE('',*,*,#140088,.T.); +#140088 = EDGE_CURVE('',#140081,#140089,#140091,.T.); +#140089 = VERTEX_POINT('',#140090); +#140090 = CARTESIAN_POINT('',(82.753265,-117.536626,1.585)); +#140091 = CIRCLE('',#140092,0.150001837666); +#140092 = AXIS2_PLACEMENT_3D('',#140093,#140094,#140095); +#140093 = CARTESIAN_POINT('',(82.8366005,-117.4119033246,1.585)); +#140094 = DIRECTION('',(-0.,0.,-1.)); +#140095 = DIRECTION('',(0.555563193735,-0.831474315759,-0.)); +#140096 = ORIENTED_EDGE('',*,*,#140097,.T.); +#140097 = EDGE_CURVE('',#140089,#140098,#140100,.T.); +#140098 = VERTEX_POINT('',#140099); +#140099 = CARTESIAN_POINT('',(82.588069,-117.37143,1.585)); +#140100 = LINE('',#140101,#140102); +#140101 = CARTESIAN_POINT('',(82.753265,-117.536626,1.585)); +#140102 = VECTOR('',#140103,1.); +#140103 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#140104 = ORIENTED_EDGE('',*,*,#140105,.T.); +#140105 = EDGE_CURVE('',#140098,#140106,#140108,.T.); +#140106 = VERTEX_POINT('',#140107); +#140107 = CARTESIAN_POINT('',(82.588069,-117.204759,1.585)); +#140108 = CIRCLE('',#140109,0.150001837666); +#140109 = AXIS2_PLACEMENT_3D('',#140110,#140111,#140112); +#140110 = CARTESIAN_POINT('',(82.712791675336,-117.2880945,1.585)); +#140111 = DIRECTION('',(0.,0.,-1.)); +#140112 = DIRECTION('',(-0.831474315759,-0.555563193736,-0.)); +#140113 = ORIENTED_EDGE('',*,*,#140114,.T.); +#140114 = EDGE_CURVE('',#140106,#140053,#140115,.T.); +#140115 = LINE('',#140116,#140117); +#140116 = CARTESIAN_POINT('',(82.588069,-117.204759,1.585)); +#140117 = VECTOR('',#140118,1.); +#140118 = DIRECTION('',(0.707111061611,0.707102500737,0.)); +#140119 = PLANE('',#140120); +#140120 = AXIS2_PLACEMENT_3D('',#140121,#140122,#140123); +#140121 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140122 = DIRECTION('',(0.,0.,1.)); +#140123 = DIRECTION('',(1.,0.,-0.)); +#140124 = SHELL_BASED_SURFACE_MODEL('',(#140125)); +#140125 = OPEN_SHELL('',(#140126)); +#140126 = ADVANCED_FACE('',(#140127),#140163,.T.); +#140127 = FACE_BOUND('',#140128,.F.); +#140128 = EDGE_LOOP('',(#140129,#140140,#140148,#140157)); +#140129 = ORIENTED_EDGE('',*,*,#140130,.T.); +#140130 = EDGE_CURVE('',#140131,#140133,#140135,.T.); +#140131 = VERTEX_POINT('',#140132); +#140132 = CARTESIAN_POINT('',(123.44165,-117.5231,1.585)); +#140133 = VERTEX_POINT('',#140134); +#140134 = CARTESIAN_POINT('',(123.44165,-117.4031,1.585)); +#140135 = CIRCLE('',#140136,6.000000000043E-02); +#140136 = AXIS2_PLACEMENT_3D('',#140137,#140138,#140139); +#140137 = CARTESIAN_POINT('',(123.44164977441,-117.4631,1.585)); +#140138 = DIRECTION('',(0.,0.,-1.)); +#140139 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140140 = ORIENTED_EDGE('',*,*,#140141,.T.); +#140141 = EDGE_CURVE('',#140133,#140142,#140144,.T.); +#140142 = VERTEX_POINT('',#140143); +#140143 = CARTESIAN_POINT('',(124.94165,-117.4031,1.585)); +#140144 = LINE('',#140145,#140146); +#140145 = CARTESIAN_POINT('',(123.44165,-117.4031,1.585)); +#140146 = VECTOR('',#140147,1.); +#140147 = DIRECTION('',(1.,0.,0.)); +#140148 = ORIENTED_EDGE('',*,*,#140149,.T.); +#140149 = EDGE_CURVE('',#140142,#140150,#140152,.T.); +#140150 = VERTEX_POINT('',#140151); +#140151 = CARTESIAN_POINT('',(124.94165,-117.5231,1.585)); +#140152 = CIRCLE('',#140153,6.000000000042E-02); +#140153 = AXIS2_PLACEMENT_3D('',#140154,#140155,#140156); +#140154 = CARTESIAN_POINT('',(124.94165022558,-117.4631,1.585)); +#140155 = DIRECTION('',(0.,0.,-1.)); +#140156 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140157 = ORIENTED_EDGE('',*,*,#140158,.T.); +#140158 = EDGE_CURVE('',#140150,#140131,#140159,.T.); +#140159 = LINE('',#140160,#140161); +#140160 = CARTESIAN_POINT('',(124.94165,-117.5231,1.585)); +#140161 = VECTOR('',#140162,1.); +#140162 = DIRECTION('',(-1.,0.,0.)); +#140163 = PLANE('',#140164); +#140164 = AXIS2_PLACEMENT_3D('',#140165,#140166,#140167); +#140165 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140166 = DIRECTION('',(0.,0.,1.)); +#140167 = DIRECTION('',(1.,0.,-0.)); +#140168 = SHELL_BASED_SURFACE_MODEL('',(#140169)); +#140169 = OPEN_SHELL('',(#140170)); +#140170 = ADVANCED_FACE('',(#140171),#140257,.T.); +#140171 = FACE_BOUND('',#140172,.F.); +#140172 = EDGE_LOOP('',(#140173,#140184,#140192,#140201,#140209,#140217, + #140225,#140234,#140242,#140251)); +#140173 = ORIENTED_EDGE('',*,*,#140174,.T.); +#140174 = EDGE_CURVE('',#140175,#140177,#140179,.T.); +#140175 = VERTEX_POINT('',#140176); +#140176 = CARTESIAN_POINT('',(98.44665,-115.3631,1.585)); +#140177 = VERTEX_POINT('',#140178); +#140178 = CARTESIAN_POINT('',(98.50665,-115.3031,1.585)); +#140179 = CIRCLE('',#140180,5.999932016258E-02); +#140180 = AXIS2_PLACEMENT_3D('',#140181,#140182,#140183); +#140181 = CARTESIAN_POINT('',(98.506649320159,-115.3630993201,1.585)); +#140182 = DIRECTION('',(0.,0.,-1.)); +#140183 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#140184 = ORIENTED_EDGE('',*,*,#140185,.T.); +#140185 = EDGE_CURVE('',#140177,#140186,#140188,.T.); +#140186 = VERTEX_POINT('',#140187); +#140187 = CARTESIAN_POINT('',(101.19165,-115.3031,1.585)); +#140188 = LINE('',#140189,#140190); +#140189 = CARTESIAN_POINT('',(98.50665,-115.3031,1.585)); +#140190 = VECTOR('',#140191,1.); +#140191 = DIRECTION('',(1.,0.,0.)); +#140192 = ORIENTED_EDGE('',*,*,#140193,.T.); +#140193 = EDGE_CURVE('',#140186,#140194,#140196,.T.); +#140194 = VERTEX_POINT('',#140195); +#140195 = CARTESIAN_POINT('',(101.19165,-115.4231,1.585)); +#140196 = CIRCLE('',#140197,6.000000000042E-02); +#140197 = AXIS2_PLACEMENT_3D('',#140198,#140199,#140200); +#140198 = CARTESIAN_POINT('',(101.19165022558,-115.3631,1.585)); +#140199 = DIRECTION('',(0.,0.,-1.)); +#140200 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#140201 = ORIENTED_EDGE('',*,*,#140202,.T.); +#140202 = EDGE_CURVE('',#140194,#140203,#140205,.T.); +#140203 = VERTEX_POINT('',#140204); +#140204 = CARTESIAN_POINT('',(98.56665,-115.4231,1.585)); +#140205 = LINE('',#140206,#140207); +#140206 = CARTESIAN_POINT('',(101.19165,-115.4231,1.585)); +#140207 = VECTOR('',#140208,1.); +#140208 = DIRECTION('',(-1.,0.,0.)); +#140209 = ORIENTED_EDGE('',*,*,#140210,.T.); +#140210 = EDGE_CURVE('',#140203,#140211,#140213,.T.); +#140211 = VERTEX_POINT('',#140212); +#140212 = CARTESIAN_POINT('',(98.56665,-117.2231,1.585)); +#140213 = LINE('',#140214,#140215); +#140214 = CARTESIAN_POINT('',(98.56665,-115.4231,1.585)); +#140215 = VECTOR('',#140216,1.); +#140216 = DIRECTION('',(0.,-1.,0.)); +#140217 = ORIENTED_EDGE('',*,*,#140218,.T.); +#140218 = EDGE_CURVE('',#140211,#140219,#140221,.T.); +#140219 = VERTEX_POINT('',#140220); +#140220 = CARTESIAN_POINT('',(101.19165,-117.2231,1.585)); +#140221 = LINE('',#140222,#140223); +#140222 = CARTESIAN_POINT('',(98.56665,-117.2231,1.585)); +#140223 = VECTOR('',#140224,1.); +#140224 = DIRECTION('',(1.,0.,0.)); +#140225 = ORIENTED_EDGE('',*,*,#140226,.T.); +#140226 = EDGE_CURVE('',#140219,#140227,#140229,.T.); +#140227 = VERTEX_POINT('',#140228); +#140228 = CARTESIAN_POINT('',(101.19165,-117.3431,1.585)); +#140229 = CIRCLE('',#140230,6.000000000042E-02); +#140230 = AXIS2_PLACEMENT_3D('',#140231,#140232,#140233); +#140231 = CARTESIAN_POINT('',(101.19165022558,-117.2831,1.585)); +#140232 = DIRECTION('',(0.,0.,-1.)); +#140233 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#140234 = ORIENTED_EDGE('',*,*,#140235,.T.); +#140235 = EDGE_CURVE('',#140227,#140236,#140238,.T.); +#140236 = VERTEX_POINT('',#140237); +#140237 = CARTESIAN_POINT('',(98.50665,-117.3431,1.585)); +#140238 = LINE('',#140239,#140240); +#140239 = CARTESIAN_POINT('',(101.19165,-117.3431,1.585)); +#140240 = VECTOR('',#140241,1.); +#140241 = DIRECTION('',(-1.,0.,0.)); +#140242 = ORIENTED_EDGE('',*,*,#140243,.T.); +#140243 = EDGE_CURVE('',#140236,#140244,#140246,.T.); +#140244 = VERTEX_POINT('',#140245); +#140245 = CARTESIAN_POINT('',(98.44665,-117.2831,1.585)); +#140246 = CIRCLE('',#140247,5.999932016262E-02); +#140247 = AXIS2_PLACEMENT_3D('',#140248,#140249,#140250); +#140248 = CARTESIAN_POINT('',(98.506649320159,-117.2831006798,1.585)); +#140249 = DIRECTION('',(0.,0.,-1.)); +#140250 = DIRECTION('',(1.133081541087E-05,-0.999999999936,0.)); +#140251 = ORIENTED_EDGE('',*,*,#140252,.T.); +#140252 = EDGE_CURVE('',#140244,#140175,#140253,.T.); +#140253 = LINE('',#140254,#140255); +#140254 = CARTESIAN_POINT('',(98.44665,-117.2831,1.585)); +#140255 = VECTOR('',#140256,1.); +#140256 = DIRECTION('',(0.,1.,0.)); +#140257 = PLANE('',#140258); +#140258 = AXIS2_PLACEMENT_3D('',#140259,#140260,#140261); +#140259 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140260 = DIRECTION('',(0.,0.,1.)); +#140261 = DIRECTION('',(1.,0.,-0.)); +#140262 = SHELL_BASED_SURFACE_MODEL('',(#140263)); +#140263 = OPEN_SHELL('',(#140264)); +#140264 = ADVANCED_FACE('',(#140265),#140301,.T.); +#140265 = FACE_BOUND('',#140266,.F.); +#140266 = EDGE_LOOP('',(#140267,#140278,#140286,#140295)); +#140267 = ORIENTED_EDGE('',*,*,#140268,.T.); +#140268 = EDGE_CURVE('',#140269,#140271,#140273,.T.); +#140269 = VERTEX_POINT('',#140270); +#140270 = CARTESIAN_POINT('',(179.454392,-116.9056,1.585)); +#140271 = VERTEX_POINT('',#140272); +#140272 = CARTESIAN_POINT('',(179.454392,-116.7856,1.585)); +#140273 = CIRCLE('',#140274,6.000000000042E-02); +#140274 = AXIS2_PLACEMENT_3D('',#140275,#140276,#140277); +#140275 = CARTESIAN_POINT('',(179.45439177441,-116.8456,1.585)); +#140276 = DIRECTION('',(0.,0.,-1.)); +#140277 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#140278 = ORIENTED_EDGE('',*,*,#140279,.T.); +#140279 = EDGE_CURVE('',#140271,#140280,#140282,.T.); +#140280 = VERTEX_POINT('',#140281); +#140281 = CARTESIAN_POINT('',(179.928908,-116.7856,1.585)); +#140282 = LINE('',#140283,#140284); +#140283 = CARTESIAN_POINT('',(179.454392,-116.7856,1.585)); +#140284 = VECTOR('',#140285,1.); +#140285 = DIRECTION('',(1.,0.,0.)); +#140286 = ORIENTED_EDGE('',*,*,#140287,.T.); +#140287 = EDGE_CURVE('',#140280,#140288,#140290,.T.); +#140288 = VERTEX_POINT('',#140289); +#140289 = CARTESIAN_POINT('',(179.928908,-116.9056,1.585)); +#140290 = CIRCLE('',#140291,6.000000000042E-02); +#140291 = AXIS2_PLACEMENT_3D('',#140292,#140293,#140294); +#140292 = CARTESIAN_POINT('',(179.92890822558,-116.8456,1.585)); +#140293 = DIRECTION('',(0.,0.,-1.)); +#140294 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140295 = ORIENTED_EDGE('',*,*,#140296,.T.); +#140296 = EDGE_CURVE('',#140288,#140269,#140297,.T.); +#140297 = LINE('',#140298,#140299); +#140298 = CARTESIAN_POINT('',(179.928908,-116.9056,1.585)); +#140299 = VECTOR('',#140300,1.); +#140300 = DIRECTION('',(-1.,0.,0.)); +#140301 = PLANE('',#140302); +#140302 = AXIS2_PLACEMENT_3D('',#140303,#140304,#140305); +#140303 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140304 = DIRECTION('',(0.,0.,1.)); +#140305 = DIRECTION('',(1.,0.,-0.)); +#140306 = SHELL_BASED_SURFACE_MODEL('',(#140307)); +#140307 = OPEN_SHELL('',(#140308)); +#140308 = ADVANCED_FACE('',(#140309),#140345,.T.); +#140309 = FACE_BOUND('',#140310,.F.); +#140310 = EDGE_LOOP('',(#140311,#140322,#140330,#140339)); +#140311 = ORIENTED_EDGE('',*,*,#140312,.T.); +#140312 = EDGE_CURVE('',#140313,#140315,#140317,.T.); +#140313 = VERTEX_POINT('',#140314); +#140314 = CARTESIAN_POINT('',(92.05107,-116.8931,1.585)); +#140315 = VERTEX_POINT('',#140316); +#140316 = CARTESIAN_POINT('',(92.05107,-116.7731,1.585)); +#140317 = CIRCLE('',#140318,6.000000000042E-02); +#140318 = AXIS2_PLACEMENT_3D('',#140319,#140320,#140321); +#140319 = CARTESIAN_POINT('',(92.051069774412,-116.8331,1.585)); +#140320 = DIRECTION('',(0.,0.,-1.)); +#140321 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140322 = ORIENTED_EDGE('',*,*,#140323,.T.); +#140323 = EDGE_CURVE('',#140315,#140324,#140326,.T.); +#140324 = VERTEX_POINT('',#140325); +#140325 = CARTESIAN_POINT('',(92.33223,-116.7731,1.585)); +#140326 = LINE('',#140327,#140328); +#140327 = CARTESIAN_POINT('',(92.05107,-116.7731,1.585)); +#140328 = VECTOR('',#140329,1.); +#140329 = DIRECTION('',(1.,0.,0.)); +#140330 = ORIENTED_EDGE('',*,*,#140331,.T.); +#140331 = EDGE_CURVE('',#140324,#140332,#140334,.T.); +#140332 = VERTEX_POINT('',#140333); +#140333 = CARTESIAN_POINT('',(92.33223,-116.8931,1.585)); +#140334 = CIRCLE('',#140335,6.000000000042E-02); +#140335 = AXIS2_PLACEMENT_3D('',#140336,#140337,#140338); +#140336 = CARTESIAN_POINT('',(92.332230225588,-116.8331,1.585)); +#140337 = DIRECTION('',(0.,0.,-1.)); +#140338 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140339 = ORIENTED_EDGE('',*,*,#140340,.T.); +#140340 = EDGE_CURVE('',#140332,#140313,#140341,.T.); +#140341 = LINE('',#140342,#140343); +#140342 = CARTESIAN_POINT('',(92.33223,-116.8931,1.585)); +#140343 = VECTOR('',#140344,1.); +#140344 = DIRECTION('',(-1.,0.,0.)); +#140345 = PLANE('',#140346); +#140346 = AXIS2_PLACEMENT_3D('',#140347,#140348,#140349); +#140347 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140348 = DIRECTION('',(0.,0.,1.)); +#140349 = DIRECTION('',(1.,0.,-0.)); +#140350 = SHELL_BASED_SURFACE_MODEL('',(#140351)); +#140351 = OPEN_SHELL('',(#140352)); +#140352 = ADVANCED_FACE('',(#140353),#140389,.T.); +#140353 = FACE_BOUND('',#140354,.F.); +#140354 = EDGE_LOOP('',(#140355,#140366,#140374,#140383)); +#140355 = ORIENTED_EDGE('',*,*,#140356,.T.); +#140356 = EDGE_CURVE('',#140357,#140359,#140361,.T.); +#140357 = VERTEX_POINT('',#140358); +#140358 = CARTESIAN_POINT('',(96.05107,-116.8931,1.585)); +#140359 = VERTEX_POINT('',#140360); +#140360 = CARTESIAN_POINT('',(96.05107,-116.7731,1.585)); +#140361 = CIRCLE('',#140362,6.000000000042E-02); +#140362 = AXIS2_PLACEMENT_3D('',#140363,#140364,#140365); +#140363 = CARTESIAN_POINT('',(96.051069774412,-116.8331,1.585)); +#140364 = DIRECTION('',(0.,0.,-1.)); +#140365 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140366 = ORIENTED_EDGE('',*,*,#140367,.T.); +#140367 = EDGE_CURVE('',#140359,#140368,#140370,.T.); +#140368 = VERTEX_POINT('',#140369); +#140369 = CARTESIAN_POINT('',(96.33223,-116.7731,1.585)); +#140370 = LINE('',#140371,#140372); +#140371 = CARTESIAN_POINT('',(96.05107,-116.7731,1.585)); +#140372 = VECTOR('',#140373,1.); +#140373 = DIRECTION('',(1.,0.,0.)); +#140374 = ORIENTED_EDGE('',*,*,#140375,.T.); +#140375 = EDGE_CURVE('',#140368,#140376,#140378,.T.); +#140376 = VERTEX_POINT('',#140377); +#140377 = CARTESIAN_POINT('',(96.33223,-116.8931,1.585)); +#140378 = CIRCLE('',#140379,6.000000000042E-02); +#140379 = AXIS2_PLACEMENT_3D('',#140380,#140381,#140382); +#140380 = CARTESIAN_POINT('',(96.332230225588,-116.8331,1.585)); +#140381 = DIRECTION('',(0.,0.,-1.)); +#140382 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140383 = ORIENTED_EDGE('',*,*,#140384,.T.); +#140384 = EDGE_CURVE('',#140376,#140357,#140385,.T.); +#140385 = LINE('',#140386,#140387); +#140386 = CARTESIAN_POINT('',(96.33223,-116.8931,1.585)); +#140387 = VECTOR('',#140388,1.); +#140388 = DIRECTION('',(-1.,0.,0.)); +#140389 = PLANE('',#140390); +#140390 = AXIS2_PLACEMENT_3D('',#140391,#140392,#140393); +#140391 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140392 = DIRECTION('',(0.,0.,1.)); +#140393 = DIRECTION('',(1.,0.,-0.)); +#140394 = SHELL_BASED_SURFACE_MODEL('',(#140395)); +#140395 = OPEN_SHELL('',(#140396)); +#140396 = ADVANCED_FACE('',(#140397),#140433,.T.); +#140397 = FACE_BOUND('',#140398,.F.); +#140398 = EDGE_LOOP('',(#140399,#140410,#140418,#140427)); +#140399 = ORIENTED_EDGE('',*,*,#140400,.T.); +#140400 = EDGE_CURVE('',#140401,#140403,#140405,.T.); +#140401 = VERTEX_POINT('',#140402); +#140402 = CARTESIAN_POINT('',(129.886082,-116.7981,1.585)); +#140403 = VERTEX_POINT('',#140404); +#140404 = CARTESIAN_POINT('',(129.886082,-116.6781,1.585)); +#140405 = CIRCLE('',#140406,6.000000000043E-02); +#140406 = AXIS2_PLACEMENT_3D('',#140407,#140408,#140409); +#140407 = CARTESIAN_POINT('',(129.88608177441,-116.7381,1.585)); +#140408 = DIRECTION('',(0.,0.,-1.)); +#140409 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#140410 = ORIENTED_EDGE('',*,*,#140411,.T.); +#140411 = EDGE_CURVE('',#140403,#140412,#140414,.T.); +#140412 = VERTEX_POINT('',#140413); +#140413 = CARTESIAN_POINT('',(131.02165,-116.6781,1.585)); +#140414 = LINE('',#140415,#140416); +#140415 = CARTESIAN_POINT('',(129.886082,-116.6781,1.585)); +#140416 = VECTOR('',#140417,1.); +#140417 = DIRECTION('',(1.,0.,0.)); +#140418 = ORIENTED_EDGE('',*,*,#140419,.T.); +#140419 = EDGE_CURVE('',#140412,#140420,#140422,.T.); +#140420 = VERTEX_POINT('',#140421); +#140421 = CARTESIAN_POINT('',(131.02165,-116.7981,1.585)); +#140422 = CIRCLE('',#140423,6.000000000042E-02); +#140423 = AXIS2_PLACEMENT_3D('',#140424,#140425,#140426); +#140424 = CARTESIAN_POINT('',(131.02165022558,-116.7381,1.585)); +#140425 = DIRECTION('',(0.,0.,-1.)); +#140426 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140427 = ORIENTED_EDGE('',*,*,#140428,.T.); +#140428 = EDGE_CURVE('',#140420,#140401,#140429,.T.); +#140429 = LINE('',#140430,#140431); +#140430 = CARTESIAN_POINT('',(131.02165,-116.7981,1.585)); +#140431 = VECTOR('',#140432,1.); +#140432 = DIRECTION('',(-1.,0.,0.)); +#140433 = PLANE('',#140434); +#140434 = AXIS2_PLACEMENT_3D('',#140435,#140436,#140437); +#140435 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140436 = DIRECTION('',(0.,0.,1.)); +#140437 = DIRECTION('',(1.,0.,-0.)); +#140438 = SHELL_BASED_SURFACE_MODEL('',(#140439)); +#140439 = OPEN_SHELL('',(#140440)); +#140440 = ADVANCED_FACE('',(#140441),#140501,.T.); +#140441 = FACE_BOUND('',#140442,.F.); +#140442 = EDGE_LOOP('',(#140443,#140454,#140462,#140471,#140479,#140487, + #140495)); +#140443 = ORIENTED_EDGE('',*,*,#140444,.T.); +#140444 = EDGE_CURVE('',#140445,#140447,#140449,.T.); +#140445 = VERTEX_POINT('',#140446); +#140446 = CARTESIAN_POINT('',(129.403347,-116.578692,1.585)); +#140447 = VERTEX_POINT('',#140448); +#140448 = CARTESIAN_POINT('',(129.45165,-116.4831,1.585)); +#140449 = CIRCLE('',#140450,5.999970641124E-02); +#140450 = AXIS2_PLACEMENT_3D('',#140451,#140452,#140453); +#140451 = CARTESIAN_POINT('',(129.45164972669,-116.5430997064,1.585)); +#140452 = DIRECTION('',(0.,0.,-1.)); +#140453 = DIRECTION('',(-0.805049384194,-0.593207795809,-0.)); +#140454 = ORIENTED_EDGE('',*,*,#140455,.T.); +#140455 = EDGE_CURVE('',#140447,#140456,#140458,.T.); +#140456 = VERTEX_POINT('',#140457); +#140457 = CARTESIAN_POINT('',(129.73165,-116.4831,1.585)); +#140458 = LINE('',#140459,#140460); +#140459 = CARTESIAN_POINT('',(129.45165,-116.4831,1.585)); +#140460 = VECTOR('',#140461,1.); +#140461 = DIRECTION('',(1.,0.,0.)); +#140462 = ORIENTED_EDGE('',*,*,#140463,.T.); +#140463 = EDGE_CURVE('',#140456,#140464,#140466,.T.); +#140464 = VERTEX_POINT('',#140465); +#140465 = CARTESIAN_POINT('',(129.779953,-116.578692,1.585)); +#140466 = CIRCLE('',#140467,6.000032339632E-02); +#140467 = AXIS2_PLACEMENT_3D('',#140468,#140469,#140470); +#140468 = CARTESIAN_POINT('',(129.73164905229,-116.5431003233,1.585)); +#140469 = DIRECTION('',(0.,0.,-1.)); +#140470 = DIRECTION('',(1.579496061155E-05,0.999999999875,0.)); +#140471 = ORIENTED_EDGE('',*,*,#140472,.T.); +#140472 = EDGE_CURVE('',#140464,#140473,#140475,.T.); +#140473 = VERTEX_POINT('',#140474); +#140474 = CARTESIAN_POINT('',(129.639953,-116.768692,1.585)); +#140475 = LINE('',#140476,#140477); +#140476 = CARTESIAN_POINT('',(129.779953,-116.578692,1.585)); +#140477 = VECTOR('',#140478,1.); +#140478 = DIRECTION('',(-0.59319903805,-0.805055837353,0.)); +#140479 = ORIENTED_EDGE('',*,*,#140480,.T.); +#140480 = EDGE_CURVE('',#140473,#140481,#140483,.T.); +#140481 = VERTEX_POINT('',#140482); +#140482 = CARTESIAN_POINT('',(129.600638,-116.792423,1.585)); +#140483 = LINE('',#140484,#140485); +#140484 = CARTESIAN_POINT('',(129.639953,-116.768692,1.585)); +#140485 = VECTOR('',#140486,1.); +#140486 = DIRECTION('',(-0.856125705372,-0.516767623406,0.)); +#140487 = ORIENTED_EDGE('',*,*,#140488,.T.); +#140488 = EDGE_CURVE('',#140481,#140489,#140491,.T.); +#140489 = VERTEX_POINT('',#140490); +#140490 = CARTESIAN_POINT('',(129.556058,-116.781403,1.585)); +#140491 = LINE('',#140492,#140493); +#140492 = CARTESIAN_POINT('',(129.600638,-116.792423,1.585)); +#140493 = VECTOR('',#140494,1.); +#140494 = DIRECTION('',(-0.970779591709,0.239972882473,0.)); +#140495 = ORIENTED_EDGE('',*,*,#140496,.T.); +#140496 = EDGE_CURVE('',#140489,#140445,#140497,.T.); +#140497 = LINE('',#140498,#140499); +#140498 = CARTESIAN_POINT('',(129.556058,-116.781403,1.585)); +#140499 = VECTOR('',#140500,1.); +#140500 = DIRECTION('',(-0.601707720116,0.798716357384,0.)); +#140501 = PLANE('',#140502); +#140502 = AXIS2_PLACEMENT_3D('',#140503,#140504,#140505); +#140503 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140504 = DIRECTION('',(0.,0.,1.)); +#140505 = DIRECTION('',(1.,0.,-0.)); +#140506 = SHELL_BASED_SURFACE_MODEL('',(#140507)); +#140507 = OPEN_SHELL('',(#140508)); +#140508 = ADVANCED_FACE('',(#140509),#140570,.T.); +#140509 = FACE_BOUND('',#140510,.F.); +#140510 = EDGE_LOOP('',(#140511,#140522,#140530,#140539,#140547,#140556, + #140564)); +#140511 = ORIENTED_EDGE('',*,*,#140512,.T.); +#140512 = EDGE_CURVE('',#140513,#140515,#140517,.T.); +#140513 = VERTEX_POINT('',#140514); +#140514 = CARTESIAN_POINT('',(197.797494,-115.501478,1.585)); +#140515 = VERTEX_POINT('',#140516); +#140516 = CARTESIAN_POINT('',(197.812126,-115.352919,1.585)); +#140517 = CIRCLE('',#140518,7.500006711465E-02); +#140518 = AXIS2_PLACEMENT_3D('',#140519,#140520,#140521); +#140519 = CARTESIAN_POINT('',(197.81212593288,-115.4279190671,1.585)); +#140520 = DIRECTION('',(0.,0.,-1.)); +#140521 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#140522 = ORIENTED_EDGE('',*,*,#140523,.T.); +#140523 = EDGE_CURVE('',#140515,#140524,#140526,.T.); +#140524 = VERTEX_POINT('',#140525); +#140525 = CARTESIAN_POINT('',(198.493424,-115.35436,1.585)); +#140526 = LINE('',#140527,#140528); +#140527 = CARTESIAN_POINT('',(197.812126,-115.352919,1.585)); +#140528 = VECTOR('',#140529,1.); +#140529 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#140530 = ORIENTED_EDGE('',*,*,#140531,.T.); +#140531 = EDGE_CURVE('',#140524,#140532,#140534,.T.); +#140532 = VERTEX_POINT('',#140533); +#140533 = CARTESIAN_POINT('',(198.547728,-115.457463,1.585)); +#140534 = CIRCLE('',#140535,7.500015546837E-02); +#140535 = AXIS2_PLACEMENT_3D('',#140536,#140537,#140538); +#140536 = CARTESIAN_POINT('',(198.47879197422,-115.4279190044,1.585)); +#140537 = DIRECTION('',(0.,0.,-1.)); +#140538 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#140539 = ORIENTED_EDGE('',*,*,#140540,.T.); +#140540 = EDGE_CURVE('',#140532,#140541,#140543,.T.); +#140541 = VERTEX_POINT('',#140542); +#140542 = CARTESIAN_POINT('',(198.112069,-116.470344,1.585)); +#140543 = LINE('',#140544,#140545); +#140544 = CARTESIAN_POINT('',(198.547728,-115.457463,1.585)); +#140545 = VECTOR('',#140546,1.); +#140546 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#140547 = ORIENTED_EDGE('',*,*,#140548,.T.); +#140548 = EDGE_CURVE('',#140541,#140549,#140551,.T.); +#140549 = VERTEX_POINT('',#140550); +#140550 = CARTESIAN_POINT('',(197.981285,-116.398375,1.585)); +#140551 = CIRCLE('',#140552,7.500030178419E-02); +#140552 = AXIS2_PLACEMENT_3D('',#140553,#140554,#140555); +#140553 = CARTESIAN_POINT('',(198.05022134698,-116.4279186174,1.585)); +#140554 = DIRECTION('',(-0.,0.,-1.)); +#140555 = DIRECTION('',(0.82463205542,-0.565669491111,-0.)); +#140556 = ORIENTED_EDGE('',*,*,#140557,.T.); +#140557 = EDGE_CURVE('',#140549,#140558,#140560,.T.); +#140558 = VERTEX_POINT('',#140559); +#140559 = CARTESIAN_POINT('',(198.365051,-115.502919,1.585)); +#140560 = LINE('',#140561,#140562); +#140561 = CARTESIAN_POINT('',(197.981285,-116.398375,1.585)); +#140562 = VECTOR('',#140563,1.); +#140563 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#140564 = ORIENTED_EDGE('',*,*,#140565,.T.); +#140565 = EDGE_CURVE('',#140558,#140513,#140566,.T.); +#140566 = LINE('',#140567,#140568); +#140567 = CARTESIAN_POINT('',(198.365051,-115.502919,1.585)); +#140568 = VECTOR('',#140569,1.); +#140569 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#140570 = PLANE('',#140571); +#140571 = AXIS2_PLACEMENT_3D('',#140572,#140573,#140574); +#140572 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140573 = DIRECTION('',(0.,0.,1.)); +#140574 = DIRECTION('',(1.,0.,-0.)); +#140575 = SHELL_BASED_SURFACE_MODEL('',(#140576)); +#140576 = OPEN_SHELL('',(#140577)); +#140577 = ADVANCED_FACE('',(#140578),#140698,.T.); +#140578 = FACE_BOUND('',#140579,.F.); +#140579 = EDGE_LOOP('',(#140580,#140591,#140599,#140608,#140616,#140625, + #140633,#140642,#140650,#140659,#140667,#140676,#140684,#140692)); +#140580 = ORIENTED_EDGE('',*,*,#140581,.T.); +#140581 = EDGE_CURVE('',#140582,#140584,#140586,.T.); +#140582 = VERTEX_POINT('',#140583); +#140583 = CARTESIAN_POINT('',(196.818077,-115.365559,1.585)); +#140584 = VERTEX_POINT('',#140585); +#140585 = CARTESIAN_POINT('',(196.934745,-115.427919,1.585)); +#140586 = CIRCLE('',#140587,7.500000000003E-02); +#140587 = AXIS2_PLACEMENT_3D('',#140588,#140589,#140590); +#140588 = CARTESIAN_POINT('',(196.859745,-115.4279190655,1.585)); +#140589 = DIRECTION('',(0.,0.,-1.)); +#140590 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#140591 = ORIENTED_EDGE('',*,*,#140592,.T.); +#140592 = EDGE_CURVE('',#140584,#140593,#140595,.T.); +#140593 = VERTEX_POINT('',#140594); +#140594 = CARTESIAN_POINT('',(196.934745,-116.219737,1.585)); +#140595 = LINE('',#140596,#140597); +#140596 = CARTESIAN_POINT('',(196.934745,-115.427919,1.585)); +#140597 = VECTOR('',#140598,1.); +#140598 = DIRECTION('',(0.,-1.,0.)); +#140599 = ORIENTED_EDGE('',*,*,#140600,.T.); +#140600 = EDGE_CURVE('',#140593,#140601,#140603,.T.); +#140601 = VERTEX_POINT('',#140602); +#140602 = CARTESIAN_POINT('',(197.067926,-116.352919,1.585)); +#140603 = CIRCLE('',#140604,0.186867373533); +#140604 = AXIS2_PLACEMENT_3D('',#140605,#140606,#140607); +#140605 = CARTESIAN_POINT('',(197.11546471388,-116.172199643,1.585)); +#140606 = DIRECTION('',(0.,0.,1.)); +#140607 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#140608 = ORIENTED_EDGE('',*,*,#140609,.T.); +#140609 = EDGE_CURVE('',#140601,#140610,#140612,.T.); +#140610 = VERTEX_POINT('',#140611); +#140611 = CARTESIAN_POINT('',(197.222992,-116.352919,1.585)); +#140612 = LINE('',#140613,#140614); +#140613 = CARTESIAN_POINT('',(197.067926,-116.352919,1.585)); +#140614 = VECTOR('',#140615,1.); +#140615 = DIRECTION('',(1.,0.,0.)); +#140616 = ORIENTED_EDGE('',*,*,#140617,.T.); +#140617 = EDGE_CURVE('',#140610,#140618,#140620,.T.); +#140618 = VERTEX_POINT('',#140619); +#140619 = CARTESIAN_POINT('',(197.356173,-116.219737,1.585)); +#140620 = CIRCLE('',#140621,0.186867760544); +#140621 = AXIS2_PLACEMENT_3D('',#140622,#140623,#140624); +#140622 = CARTESIAN_POINT('',(197.17545296928,-116.1721993262,1.585)); +#140623 = DIRECTION('',(0.,0.,1.)); +#140624 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#140625 = ORIENTED_EDGE('',*,*,#140626,.T.); +#140626 = EDGE_CURVE('',#140618,#140627,#140629,.T.); +#140627 = VERTEX_POINT('',#140628); +#140628 = CARTESIAN_POINT('',(197.357614,-115.413287,1.585)); +#140629 = LINE('',#140630,#140631); +#140630 = CARTESIAN_POINT('',(197.356173,-116.219737,1.585)); +#140631 = VECTOR('',#140632,1.); +#140632 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#140633 = ORIENTED_EDGE('',*,*,#140634,.T.); +#140634 = EDGE_CURVE('',#140627,#140635,#140637,.T.); +#140635 = VERTEX_POINT('',#140636); +#140636 = CARTESIAN_POINT('',(197.506173,-115.427919,1.585)); +#140637 = CIRCLE('',#140638,7.500006711463E-02); +#140638 = AXIS2_PLACEMENT_3D('',#140639,#140640,#140641); +#140639 = CARTESIAN_POINT('',(197.43117293288,-115.4279189328,1.585)); +#140640 = DIRECTION('',(0.,0.,-1.)); +#140641 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#140642 = ORIENTED_EDGE('',*,*,#140643,.T.); +#140643 = EDGE_CURVE('',#140635,#140644,#140646,.T.); +#140644 = VERTEX_POINT('',#140645); +#140645 = CARTESIAN_POINT('',(197.50351,-116.257252,1.585)); +#140646 = LINE('',#140647,#140648); +#140647 = CARTESIAN_POINT('',(197.506173,-115.427919,1.585)); +#140648 = VECTOR('',#140649,1.); +#140649 = DIRECTION('',(-3.210997598685E-03,-0.999994844734,0.)); +#140650 = ORIENTED_EDGE('',*,*,#140651,.T.); +#140651 = EDGE_CURVE('',#140644,#140652,#140654,.T.); +#140652 = VERTEX_POINT('',#140653); +#140653 = CARTESIAN_POINT('',(197.255329,-116.501478,1.585)); +#140654 = CIRCLE('',#140655,0.348635327447); +#140655 = AXIS2_PLACEMENT_3D('',#140656,#140657,#140658); +#140656 = CARTESIAN_POINT('',(197.16755748129,-116.1640720841,1.585)); +#140657 = DIRECTION('',(0.,0.,-1.)); +#140658 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#140659 = ORIENTED_EDGE('',*,*,#140660,.T.); +#140660 = EDGE_CURVE('',#140652,#140661,#140663,.T.); +#140661 = VERTEX_POINT('',#140662); +#140662 = CARTESIAN_POINT('',(197.030411,-116.500256,1.585)); +#140663 = LINE('',#140664,#140665); +#140664 = CARTESIAN_POINT('',(197.255329,-116.501478,1.585)); +#140665 = VECTOR('',#140666,1.); +#140666 = DIRECTION('',(-0.999985241087,5.433010984541E-03,0.)); +#140667 = ORIENTED_EDGE('',*,*,#140668,.T.); +#140668 = EDGE_CURVE('',#140661,#140669,#140671,.T.); +#140669 = VERTEX_POINT('',#140670); +#140670 = CARTESIAN_POINT('',(196.786186,-116.252074,1.585)); +#140671 = CIRCLE('',#140672,0.348628446662); +#140672 = AXIS2_PLACEMENT_3D('',#140673,#140674,#140675); +#140673 = CARTESIAN_POINT('',(197.12358661322,-116.1643094284,1.585)); +#140674 = DIRECTION('',(0.,0.,-1.)); +#140675 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#140676 = ORIENTED_EDGE('',*,*,#140677,.T.); +#140677 = EDGE_CURVE('',#140669,#140678,#140680,.T.); +#140678 = VERTEX_POINT('',#140679); +#140679 = CARTESIAN_POINT('',(196.786186,-115.413287,1.585)); +#140680 = LINE('',#140681,#140682); +#140681 = CARTESIAN_POINT('',(196.786186,-116.252074,1.585)); +#140682 = VECTOR('',#140683,1.); +#140683 = DIRECTION('',(0.,1.,0.)); +#140684 = ORIENTED_EDGE('',*,*,#140685,.T.); +#140685 = EDGE_CURVE('',#140678,#140686,#140688,.T.); +#140686 = VERTEX_POINT('',#140687); +#140687 = CARTESIAN_POINT('',(196.797385,-115.386251,1.585)); +#140688 = LINE('',#140689,#140690); +#140689 = CARTESIAN_POINT('',(196.786186,-115.413287,1.585)); +#140690 = VECTOR('',#140691,1.); +#140691 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#140692 = ORIENTED_EDGE('',*,*,#140693,.T.); +#140693 = EDGE_CURVE('',#140686,#140582,#140694,.T.); +#140694 = LINE('',#140695,#140696); +#140695 = CARTESIAN_POINT('',(196.797385,-115.386251,1.585)); +#140696 = VECTOR('',#140697,1.); +#140697 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140698 = PLANE('',#140699); +#140699 = AXIS2_PLACEMENT_3D('',#140700,#140701,#140702); +#140700 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140701 = DIRECTION('',(0.,0.,1.)); +#140702 = DIRECTION('',(1.,0.,-0.)); +#140703 = SHELL_BASED_SURFACE_MODEL('',(#140704)); +#140704 = OPEN_SHELL('',(#140705)); +#140705 = ADVANCED_FACE('',(#140706),#140765,.T.); +#140706 = FACE_BOUND('',#140707,.F.); +#140707 = EDGE_LOOP('',(#140708,#140718,#140726,#140734,#140743,#140751, + #140759)); +#140708 = ORIENTED_EDGE('',*,*,#140709,.T.); +#140709 = EDGE_CURVE('',#140710,#140712,#140714,.T.); +#140710 = VERTEX_POINT('',#140711); +#140711 = CARTESIAN_POINT('',(169.766514,-114.234318,1.585)); +#140712 = VERTEX_POINT('',#140713); +#140713 = CARTESIAN_POINT('',(169.820586,-114.21192,1.585)); +#140714 = LINE('',#140715,#140716); +#140715 = CARTESIAN_POINT('',(169.766514,-114.234318,1.585)); +#140716 = VECTOR('',#140717,1.); +#140717 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#140718 = ORIENTED_EDGE('',*,*,#140719,.T.); +#140719 = EDGE_CURVE('',#140712,#140720,#140722,.T.); +#140720 = VERTEX_POINT('',#140721); +#140721 = CARTESIAN_POINT('',(169.842954,-114.189551,1.585)); +#140722 = LINE('',#140723,#140724); +#140723 = CARTESIAN_POINT('',(169.820586,-114.21192,1.585)); +#140724 = VECTOR('',#140725,1.); +#140725 = DIRECTION('',(0.707090975149,0.707122586871,0.)); +#140726 = ORIENTED_EDGE('',*,*,#140727,.T.); +#140727 = EDGE_CURVE('',#140720,#140728,#140730,.T.); +#140728 = VERTEX_POINT('',#140729); +#140729 = CARTESIAN_POINT('',(171.884076,-116.230673,1.585)); +#140730 = LINE('',#140731,#140732); +#140731 = CARTESIAN_POINT('',(169.842954,-114.189551,1.585)); +#140732 = VECTOR('',#140733,1.); +#140733 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140734 = ORIENTED_EDGE('',*,*,#140735,.T.); +#140735 = EDGE_CURVE('',#140728,#140736,#140738,.T.); +#140736 = VERTEX_POINT('',#140737); +#140737 = CARTESIAN_POINT('',(171.799223,-116.315526,1.585)); +#140738 = CIRCLE('',#140739,6.000013170922E-02); +#140739 = AXIS2_PLACEMENT_3D('',#140740,#140741,#140742); +#140740 = CARTESIAN_POINT('',(171.8416500587,-116.2731000587,1.585)); +#140741 = DIRECTION('',(0.,0.,-1.)); +#140742 = DIRECTION('',(0.707097469327,0.707116092923,0.)); +#140743 = ORIENTED_EDGE('',*,*,#140744,.T.); +#140744 = EDGE_CURVE('',#140736,#140745,#140747,.T.); +#140745 = VERTEX_POINT('',#140746); +#140746 = CARTESIAN_POINT('',(169.719111,-114.235413,1.585)); +#140747 = LINE('',#140748,#140749); +#140748 = CARTESIAN_POINT('',(171.799223,-116.315526,1.585)); +#140749 = VECTOR('',#140750,1.); +#140750 = DIRECTION('',(-0.707106611218,0.707106951155,0.)); +#140751 = ORIENTED_EDGE('',*,*,#140752,.T.); +#140752 = EDGE_CURVE('',#140745,#140753,#140755,.T.); +#140753 = VERTEX_POINT('',#140754); +#140754 = CARTESIAN_POINT('',(169.73725,-114.2372,1.585)); +#140755 = LINE('',#140756,#140757); +#140756 = CARTESIAN_POINT('',(169.719111,-114.235413,1.585)); +#140757 = VECTOR('',#140758,1.); +#140758 = DIRECTION('',(0.995182240819,-9.804237633566E-02,0.)); +#140759 = ORIENTED_EDGE('',*,*,#140760,.T.); +#140760 = EDGE_CURVE('',#140753,#140710,#140761,.T.); +#140761 = LINE('',#140762,#140763); +#140762 = CARTESIAN_POINT('',(169.73725,-114.2372,1.585)); +#140763 = VECTOR('',#140764,1.); +#140764 = DIRECTION('',(0.995185563998,9.800863844454E-02,0.)); +#140765 = PLANE('',#140766); +#140766 = AXIS2_PLACEMENT_3D('',#140767,#140768,#140769); +#140767 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140768 = DIRECTION('',(0.,0.,1.)); +#140769 = DIRECTION('',(1.,0.,-0.)); +#140770 = SHELL_BASED_SURFACE_MODEL('',(#140771)); +#140771 = OPEN_SHELL('',(#140772)); +#140772 = ADVANCED_FACE('',(#140773),#140891,.T.); +#140773 = FACE_BOUND('',#140774,.F.); +#140774 = EDGE_LOOP('',(#140775,#140785,#140793,#140802,#140810,#140818, + #140827,#140835,#140844,#140852,#140860,#140868,#140876,#140885)); +#140775 = ORIENTED_EDGE('',*,*,#140776,.T.); +#140776 = EDGE_CURVE('',#140777,#140779,#140781,.T.); +#140777 = VERTEX_POINT('',#140778); +#140778 = CARTESIAN_POINT('',(84.81702,-114.846861,1.585)); +#140779 = VERTEX_POINT('',#140780); +#140780 = CARTESIAN_POINT('',(85.036922,-115.066763,1.585)); +#140781 = LINE('',#140782,#140783); +#140782 = CARTESIAN_POINT('',(84.81702,-114.846861,1.585)); +#140783 = VECTOR('',#140784,1.); +#140784 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140785 = ORIENTED_EDGE('',*,*,#140786,.T.); +#140786 = EDGE_CURVE('',#140779,#140787,#140789,.T.); +#140787 = VERTEX_POINT('',#140788); +#140788 = CARTESIAN_POINT('',(85.418746,-115.324776,1.585)); +#140789 = LINE('',#140790,#140791); +#140790 = CARTESIAN_POINT('',(85.036922,-115.066763,1.585)); +#140791 = VECTOR('',#140792,1.); +#140792 = DIRECTION('',(0.8285649987,-0.559892885229,0.)); +#140793 = ORIENTED_EDGE('',*,*,#140794,.T.); +#140794 = EDGE_CURVE('',#140787,#140795,#140797,.T.); +#140795 = VERTEX_POINT('',#140796); +#140796 = CARTESIAN_POINT('',(85.31279,-115.580953,1.585)); +#140797 = CIRCLE('',#140798,0.150000684187); +#140798 = AXIS2_PLACEMENT_3D('',#140799,#140800,#140801); +#140799 = CARTESIAN_POINT('',(85.312789427684,-115.4309523158,1.585)); +#140800 = DIRECTION('',(0.,0.,-1.)); +#140801 = DIRECTION('',(0.706373926824,0.707838876796,0.)); +#140802 = ORIENTED_EDGE('',*,*,#140803,.T.); +#140803 = EDGE_CURVE('',#140795,#140804,#140806,.T.); +#140804 = VERTEX_POINT('',#140805); +#140805 = CARTESIAN_POINT('',(82.86279,-115.580953,1.585)); +#140806 = LINE('',#140807,#140808); +#140807 = CARTESIAN_POINT('',(85.31279,-115.580953,1.585)); +#140808 = VECTOR('',#140809,1.); +#140809 = DIRECTION('',(-1.,0.,0.)); +#140810 = ORIENTED_EDGE('',*,*,#140811,.T.); +#140811 = EDGE_CURVE('',#140804,#140812,#140814,.T.); +#140812 = VERTEX_POINT('',#140813); +#140813 = CARTESIAN_POINT('',(82.859908,-116.203074,1.585)); +#140814 = LINE('',#140815,#140816); +#140815 = CARTESIAN_POINT('',(82.86279,-115.580953,1.585)); +#140816 = VECTOR('',#140817,1.); +#140817 = DIRECTION('',(-4.632489621844E-03,-0.999989269962,0.)); +#140818 = ORIENTED_EDGE('',*,*,#140819,.T.); +#140819 = EDGE_CURVE('',#140812,#140820,#140822,.T.); +#140820 = VERTEX_POINT('',#140821); +#140821 = CARTESIAN_POINT('',(82.565672,-116.203074,1.585)); +#140822 = CIRCLE('',#140823,0.150000292066); +#140823 = AXIS2_PLACEMENT_3D('',#140824,#140825,#140826); +#140824 = CARTESIAN_POINT('',(82.71279,-116.17381,1.585)); +#140825 = DIRECTION('',(-0.,0.,-1.)); +#140826 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#140827 = ORIENTED_EDGE('',*,*,#140828,.T.); +#140828 = EDGE_CURVE('',#140820,#140829,#140831,.T.); +#140829 = VERTEX_POINT('',#140830); +#140830 = CARTESIAN_POINT('',(82.565672,-114.658832,1.585)); +#140831 = LINE('',#140832,#140833); +#140832 = CARTESIAN_POINT('',(82.565672,-116.203074,1.585)); +#140833 = VECTOR('',#140834,1.); +#140834 = DIRECTION('',(0.,1.,0.)); +#140835 = ORIENTED_EDGE('',*,*,#140836,.T.); +#140836 = EDGE_CURVE('',#140829,#140837,#140839,.T.); +#140837 = VERTEX_POINT('',#140838); +#140838 = CARTESIAN_POINT('',(82.859908,-114.658832,1.585)); +#140839 = CIRCLE('',#140840,0.150000292066); +#140840 = AXIS2_PLACEMENT_3D('',#140841,#140842,#140843); +#140841 = CARTESIAN_POINT('',(82.71279,-114.688096,1.585)); +#140842 = DIRECTION('',(0.,0.,-1.)); +#140843 = DIRECTION('',(-0.980784756972,0.195092953466,0.)); +#140844 = ORIENTED_EDGE('',*,*,#140845,.T.); +#140845 = EDGE_CURVE('',#140837,#140846,#140848,.T.); +#140846 = VERTEX_POINT('',#140847); +#140847 = CARTESIAN_POINT('',(82.86279,-115.280953,1.585)); +#140848 = LINE('',#140849,#140850); +#140849 = CARTESIAN_POINT('',(82.859908,-114.658832,1.585)); +#140850 = VECTOR('',#140851,1.); +#140851 = DIRECTION('',(4.632489621844E-03,-0.999989269962,0.)); +#140852 = ORIENTED_EDGE('',*,*,#140853,.T.); +#140853 = EDGE_CURVE('',#140846,#140854,#140856,.T.); +#140854 = VERTEX_POINT('',#140855); +#140855 = CARTESIAN_POINT('',(84.826848,-115.280953,1.585)); +#140856 = LINE('',#140857,#140858); +#140857 = CARTESIAN_POINT('',(82.86279,-115.280953,1.585)); +#140858 = VECTOR('',#140859,1.); +#140859 = DIRECTION('',(1.,0.,0.)); +#140860 = ORIENTED_EDGE('',*,*,#140861,.T.); +#140861 = EDGE_CURVE('',#140854,#140862,#140864,.T.); +#140862 = VERTEX_POINT('',#140863); +#140863 = CARTESIAN_POINT('',(84.569021,-115.01905,1.585)); +#140864 = LINE('',#140865,#140866); +#140865 = CARTESIAN_POINT('',(84.826848,-115.280953,1.585)); +#140866 = VECTOR('',#140867,1.); +#140867 = DIRECTION('',(-0.701539698595,0.712630374946,0.)); +#140868 = ORIENTED_EDGE('',*,*,#140869,.T.); +#140869 = EDGE_CURVE('',#140862,#140870,#140872,.T.); +#140870 = VERTEX_POINT('',#140871); +#140871 = CARTESIAN_POINT('',(84.425259,-114.727714,1.585)); +#140872 = LINE('',#140873,#140874); +#140873 = CARTESIAN_POINT('',(84.569021,-115.01905,1.585)); +#140874 = VECTOR('',#140875,1.); +#140875 = DIRECTION('',(-0.442513949871,0.896761620593,0.)); +#140876 = ORIENTED_EDGE('',*,*,#140877,.T.); +#140877 = EDGE_CURVE('',#140870,#140878,#140880,.T.); +#140878 = VERTEX_POINT('',#140879); +#140879 = CARTESIAN_POINT('',(84.688432,-114.596129,1.585)); +#140880 = CIRCLE('',#140881,0.150000402282); +#140881 = AXIS2_PLACEMENT_3D('',#140882,#140883,#140884); +#140882 = CARTESIAN_POINT('',(84.56993324255,-114.6880972834,1.585)); +#140883 = DIRECTION('',(0.,0.,-1.)); +#140884 = DIRECTION('',(-0.96449236368,-0.264110735115,-0.)); +#140885 = ORIENTED_EDGE('',*,*,#140886,.T.); +#140886 = EDGE_CURVE('',#140878,#140777,#140887,.T.); +#140887 = LINE('',#140888,#140889); +#140888 = CARTESIAN_POINT('',(84.688432,-114.596129,1.585)); +#140889 = VECTOR('',#140890,1.); +#140890 = DIRECTION('',(0.456337685543,-0.889806673808,0.)); +#140891 = PLANE('',#140892); +#140892 = AXIS2_PLACEMENT_3D('',#140893,#140894,#140895); +#140893 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140894 = DIRECTION('',(0.,0.,1.)); +#140895 = DIRECTION('',(1.,0.,-0.)); +#140896 = SHELL_BASED_SURFACE_MODEL('',(#140897)); +#140897 = OPEN_SHELL('',(#140898)); +#140898 = ADVANCED_FACE('',(#140899),#140935,.T.); +#140899 = FACE_BOUND('',#140900,.F.); +#140900 = EDGE_LOOP('',(#140901,#140912,#140920,#140929)); +#140901 = ORIENTED_EDGE('',*,*,#140902,.T.); +#140902 = EDGE_CURVE('',#140903,#140905,#140907,.T.); +#140903 = VERTEX_POINT('',#140904); +#140904 = CARTESIAN_POINT('',(92.05107,-115.8731,1.585)); +#140905 = VERTEX_POINT('',#140906); +#140906 = CARTESIAN_POINT('',(92.05107,-115.7531,1.585)); +#140907 = CIRCLE('',#140908,6.000000000042E-02); +#140908 = AXIS2_PLACEMENT_3D('',#140909,#140910,#140911); +#140909 = CARTESIAN_POINT('',(92.051069774412,-115.8131,1.585)); +#140910 = DIRECTION('',(0.,0.,-1.)); +#140911 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140912 = ORIENTED_EDGE('',*,*,#140913,.T.); +#140913 = EDGE_CURVE('',#140905,#140914,#140916,.T.); +#140914 = VERTEX_POINT('',#140915); +#140915 = CARTESIAN_POINT('',(92.33223,-115.7531,1.585)); +#140916 = LINE('',#140917,#140918); +#140917 = CARTESIAN_POINT('',(92.05107,-115.7531,1.585)); +#140918 = VECTOR('',#140919,1.); +#140919 = DIRECTION('',(1.,0.,0.)); +#140920 = ORIENTED_EDGE('',*,*,#140921,.T.); +#140921 = EDGE_CURVE('',#140914,#140922,#140924,.T.); +#140922 = VERTEX_POINT('',#140923); +#140923 = CARTESIAN_POINT('',(92.33223,-115.8731,1.585)); +#140924 = CIRCLE('',#140925,6.000000000042E-02); +#140925 = AXIS2_PLACEMENT_3D('',#140926,#140927,#140928); +#140926 = CARTESIAN_POINT('',(92.332230225588,-115.8131,1.585)); +#140927 = DIRECTION('',(0.,0.,-1.)); +#140928 = DIRECTION('',(-3.759794490532E-06,0.999999999993,-0.)); +#140929 = ORIENTED_EDGE('',*,*,#140930,.T.); +#140930 = EDGE_CURVE('',#140922,#140903,#140931,.T.); +#140931 = LINE('',#140932,#140933); +#140932 = CARTESIAN_POINT('',(92.33223,-115.8731,1.585)); +#140933 = VECTOR('',#140934,1.); +#140934 = DIRECTION('',(-1.,0.,0.)); +#140935 = PLANE('',#140936); +#140936 = AXIS2_PLACEMENT_3D('',#140937,#140938,#140939); +#140937 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140938 = DIRECTION('',(0.,0.,1.)); +#140939 = DIRECTION('',(1.,0.,-0.)); +#140940 = SHELL_BASED_SURFACE_MODEL('',(#140941)); +#140941 = OPEN_SHELL('',(#140942)); +#140942 = ADVANCED_FACE('',(#140943),#140979,.T.); +#140943 = FACE_BOUND('',#140944,.F.); +#140944 = EDGE_LOOP('',(#140945,#140956,#140964,#140973)); +#140945 = ORIENTED_EDGE('',*,*,#140946,.T.); +#140946 = EDGE_CURVE('',#140947,#140949,#140951,.T.); +#140947 = VERTEX_POINT('',#140948); +#140948 = CARTESIAN_POINT('',(96.05107,-115.8731,1.585)); +#140949 = VERTEX_POINT('',#140950); +#140950 = CARTESIAN_POINT('',(96.05107,-115.7531,1.585)); +#140951 = CIRCLE('',#140952,6.000000000042E-02); +#140952 = AXIS2_PLACEMENT_3D('',#140953,#140954,#140955); +#140953 = CARTESIAN_POINT('',(96.051069774412,-115.8131,1.585)); +#140954 = DIRECTION('',(0.,0.,-1.)); +#140955 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140956 = ORIENTED_EDGE('',*,*,#140957,.T.); +#140957 = EDGE_CURVE('',#140949,#140958,#140960,.T.); +#140958 = VERTEX_POINT('',#140959); +#140959 = CARTESIAN_POINT('',(96.33223,-115.7531,1.585)); +#140960 = LINE('',#140961,#140962); +#140961 = CARTESIAN_POINT('',(96.05107,-115.7531,1.585)); +#140962 = VECTOR('',#140963,1.); +#140963 = DIRECTION('',(1.,0.,0.)); +#140964 = ORIENTED_EDGE('',*,*,#140965,.T.); +#140965 = EDGE_CURVE('',#140958,#140966,#140968,.T.); +#140966 = VERTEX_POINT('',#140967); +#140967 = CARTESIAN_POINT('',(96.33223,-115.8731,1.585)); +#140968 = CIRCLE('',#140969,6.000000000042E-02); +#140969 = AXIS2_PLACEMENT_3D('',#140970,#140971,#140972); +#140970 = CARTESIAN_POINT('',(96.332230225588,-115.8131,1.585)); +#140971 = DIRECTION('',(0.,0.,-1.)); +#140972 = DIRECTION('',(-3.759794490532E-06,0.999999999993,-0.)); +#140973 = ORIENTED_EDGE('',*,*,#140974,.T.); +#140974 = EDGE_CURVE('',#140966,#140947,#140975,.T.); +#140975 = LINE('',#140976,#140977); +#140976 = CARTESIAN_POINT('',(96.33223,-115.8731,1.585)); +#140977 = VECTOR('',#140978,1.); +#140978 = DIRECTION('',(-1.,0.,0.)); +#140979 = PLANE('',#140980); +#140980 = AXIS2_PLACEMENT_3D('',#140981,#140982,#140983); +#140981 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140982 = DIRECTION('',(0.,0.,1.)); +#140983 = DIRECTION('',(1.,0.,-0.)); +#140984 = SHELL_BASED_SURFACE_MODEL('',(#140985)); +#140985 = OPEN_SHELL('',(#140986)); +#140986 = ADVANCED_FACE('',(#140987),#141023,.T.); +#140987 = FACE_BOUND('',#140988,.F.); +#140988 = EDGE_LOOP('',(#140989,#141000,#141008,#141017)); +#140989 = ORIENTED_EDGE('',*,*,#140990,.T.); +#140990 = EDGE_CURVE('',#140991,#140993,#140995,.T.); +#140991 = VERTEX_POINT('',#140992); +#140992 = CARTESIAN_POINT('',(179.454392,-115.8606,1.585)); +#140993 = VERTEX_POINT('',#140994); +#140994 = CARTESIAN_POINT('',(179.454392,-115.7406,1.585)); +#140995 = CIRCLE('',#140996,6.000000000042E-02); +#140996 = AXIS2_PLACEMENT_3D('',#140997,#140998,#140999); +#140997 = CARTESIAN_POINT('',(179.45439177441,-115.8006,1.585)); +#140998 = DIRECTION('',(0.,0.,-1.)); +#140999 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#141000 = ORIENTED_EDGE('',*,*,#141001,.T.); +#141001 = EDGE_CURVE('',#140993,#141002,#141004,.T.); +#141002 = VERTEX_POINT('',#141003); +#141003 = CARTESIAN_POINT('',(179.928908,-115.7406,1.585)); +#141004 = LINE('',#141005,#141006); +#141005 = CARTESIAN_POINT('',(179.454392,-115.7406,1.585)); +#141006 = VECTOR('',#141007,1.); +#141007 = DIRECTION('',(1.,0.,0.)); +#141008 = ORIENTED_EDGE('',*,*,#141009,.T.); +#141009 = EDGE_CURVE('',#141002,#141010,#141012,.T.); +#141010 = VERTEX_POINT('',#141011); +#141011 = CARTESIAN_POINT('',(179.928908,-115.8606,1.585)); +#141012 = CIRCLE('',#141013,6.000000000042E-02); +#141013 = AXIS2_PLACEMENT_3D('',#141014,#141015,#141016); +#141014 = CARTESIAN_POINT('',(179.92890822558,-115.8006,1.585)); +#141015 = DIRECTION('',(0.,0.,-1.)); +#141016 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#141017 = ORIENTED_EDGE('',*,*,#141018,.T.); +#141018 = EDGE_CURVE('',#141010,#140991,#141019,.T.); +#141019 = LINE('',#141020,#141021); +#141020 = CARTESIAN_POINT('',(179.928908,-115.8606,1.585)); +#141021 = VECTOR('',#141022,1.); +#141022 = DIRECTION('',(-1.,0.,0.)); +#141023 = PLANE('',#141024); +#141024 = AXIS2_PLACEMENT_3D('',#141025,#141026,#141027); +#141025 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141026 = DIRECTION('',(0.,0.,1.)); +#141027 = DIRECTION('',(1.,0.,-0.)); +#141028 = SHELL_BASED_SURFACE_MODEL('',(#141029)); +#141029 = OPEN_SHELL('',(#141030)); +#141030 = ADVANCED_FACE('',(#141031,#141133),#141201,.T.); +#141031 = FACE_BOUND('',#141032,.F.); +#141032 = EDGE_LOOP('',(#141033,#141044,#141052,#141060,#141069,#141077, + #141086,#141094,#141102,#141111,#141119,#141127)); +#141033 = ORIENTED_EDGE('',*,*,#141034,.T.); +#141034 = EDGE_CURVE('',#141035,#141037,#141039,.T.); +#141035 = VERTEX_POINT('',#141036); +#141036 = CARTESIAN_POINT('',(181.007125,-114.618892,1.585)); +#141037 = VERTEX_POINT('',#141038); +#141038 = CARTESIAN_POINT('',(181.093989,-114.62242,1.585)); +#141039 = CIRCLE('',#141040,7.226649079677E-02); +#141040 = AXIS2_PLACEMENT_3D('',#141041,#141042,#141043); +#141041 = CARTESIAN_POINT('',(181.04821412996,-114.6783405415,1.585)); +#141042 = DIRECTION('',(0.,0.,-1.)); +#141043 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#141044 = ORIENTED_EDGE('',*,*,#141045,.T.); +#141045 = EDGE_CURVE('',#141037,#141046,#141048,.T.); +#141046 = VERTEX_POINT('',#141047); +#141047 = CARTESIAN_POINT('',(181.129399,-114.607693,1.585)); +#141048 = LINE('',#141049,#141050); +#141049 = CARTESIAN_POINT('',(181.093989,-114.62242,1.585)); +#141050 = VECTOR('',#141051,1.); +#141051 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#141052 = ORIENTED_EDGE('',*,*,#141053,.T.); +#141053 = EDGE_CURVE('',#141046,#141054,#141056,.T.); +#141054 = VERTEX_POINT('',#141055); +#141055 = CARTESIAN_POINT('',(181.349139,-114.607693,1.585)); +#141056 = LINE('',#141057,#141058); +#141057 = CARTESIAN_POINT('',(181.129399,-114.607693,1.585)); +#141058 = VECTOR('',#141059,1.); +#141059 = DIRECTION('',(1.,0.,0.)); +#141060 = ORIENTED_EDGE('',*,*,#141061,.T.); +#141061 = EDGE_CURVE('',#141054,#141062,#141064,.T.); +#141062 = VERTEX_POINT('',#141063); +#141063 = CARTESIAN_POINT('',(181.598542,-114.857096,1.585)); +#141064 = CIRCLE('',#141065,0.347870264855); +#141065 = AXIS2_PLACEMENT_3D('',#141066,#141067,#141068); +#141066 = CARTESIAN_POINT('',(181.26181126502,-114.9444237349,1.585)); +#141067 = DIRECTION('',(0.,0.,-1.)); +#141068 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#141069 = ORIENTED_EDGE('',*,*,#141070,.T.); +#141070 = EDGE_CURVE('',#141062,#141071,#141073,.T.); +#141071 = VERTEX_POINT('',#141072); +#141072 = CARTESIAN_POINT('',(181.59732,-115.177252,1.585)); +#141073 = LINE('',#141074,#141075); +#141074 = CARTESIAN_POINT('',(181.598542,-114.857096,1.585)); +#141075 = VECTOR('',#141076,1.); +#141076 = DIRECTION('',(-3.816861463376E-03,-0.999992715758,0.)); +#141077 = ORIENTED_EDGE('',*,*,#141078,.T.); +#141078 = EDGE_CURVE('',#141071,#141079,#141081,.T.); +#141079 = VERTEX_POINT('',#141080); +#141080 = CARTESIAN_POINT('',(181.349139,-115.421478,1.585)); +#141081 = CIRCLE('',#141082,0.348635327447); +#141082 = AXIS2_PLACEMENT_3D('',#141083,#141084,#141085); +#141083 = CARTESIAN_POINT('',(181.26136748129,-115.0840720841,1.585)); +#141084 = DIRECTION('',(0.,0.,-1.)); +#141085 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#141086 = ORIENTED_EDGE('',*,*,#141087,.T.); +#141087 = EDGE_CURVE('',#141079,#141088,#141090,.T.); +#141088 = VERTEX_POINT('',#141089); +#141089 = CARTESIAN_POINT('',(181.123793,-115.420092,1.585)); +#141090 = LINE('',#141091,#141092); +#141091 = CARTESIAN_POINT('',(181.349139,-115.421478,1.585)); +#141092 = VECTOR('',#141093,1.); +#141093 = DIRECTION('',(-0.999981085954,6.150425501802E-03,0.)); +#141094 = ORIENTED_EDGE('',*,*,#141095,.T.); +#141095 = EDGE_CURVE('',#141088,#141096,#141098,.T.); +#141096 = VERTEX_POINT('',#141097); +#141097 = CARTESIAN_POINT('',(181.122352,-115.695884,1.585)); +#141098 = LINE('',#141099,#141100); +#141099 = CARTESIAN_POINT('',(181.123793,-115.420092,1.585)); +#141100 = VECTOR('',#141101,1.); +#141101 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#141102 = ORIENTED_EDGE('',*,*,#141103,.T.); +#141103 = EDGE_CURVE('',#141096,#141104,#141106,.T.); +#141104 = VERTEX_POINT('',#141105); +#141105 = CARTESIAN_POINT('',(180.973793,-115.681252,1.585)); +#141106 = CIRCLE('',#141107,7.500006711465E-02); +#141107 = AXIS2_PLACEMENT_3D('',#141108,#141109,#141110); +#141108 = CARTESIAN_POINT('',(181.04879306711,-115.6812520671,1.585)); +#141109 = DIRECTION('',(-0.,0.,-1.)); +#141110 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#141111 = ORIENTED_EDGE('',*,*,#141112,.T.); +#141112 = EDGE_CURVE('',#141104,#141113,#141115,.T.); +#141113 = VERTEX_POINT('',#141114); +#141114 = CARTESIAN_POINT('',(180.975234,-114.66662,1.585)); +#141115 = LINE('',#141116,#141117); +#141116 = CARTESIAN_POINT('',(180.973793,-115.681252,1.585)); +#141117 = VECTOR('',#141118,1.); +#141118 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#141119 = ORIENTED_EDGE('',*,*,#141120,.T.); +#141120 = EDGE_CURVE('',#141113,#141121,#141123,.T.); +#141121 = VERTEX_POINT('',#141122); +#141122 = CARTESIAN_POINT('',(180.986433,-114.639584,1.585)); +#141123 = LINE('',#141124,#141125); +#141124 = CARTESIAN_POINT('',(180.975234,-114.66662,1.585)); +#141125 = VECTOR('',#141126,1.); +#141126 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#141127 = ORIENTED_EDGE('',*,*,#141128,.T.); +#141128 = EDGE_CURVE('',#141121,#141035,#141129,.T.); +#141129 = LINE('',#141130,#141131); +#141130 = CARTESIAN_POINT('',(180.986433,-114.639584,1.585)); +#141131 = VECTOR('',#141132,1.); +#141132 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#141133 = FACE_BOUND('',#141134,.F.); +#141134 = EDGE_LOOP('',(#141135,#141146,#141154,#141162,#141170,#141178, + #141186,#141195)); +#141135 = ORIENTED_EDGE('',*,*,#141136,.T.); +#141136 = EDGE_CURVE('',#141137,#141139,#141141,.T.); +#141137 = VERTEX_POINT('',#141138); +#141138 = CARTESIAN_POINT('',(181.449983,-114.889433,1.585)); +#141139 = VERTEX_POINT('',#141140); +#141140 = CARTESIAN_POINT('',(181.316802,-114.756252,1.585)); +#141141 = CIRCLE('',#141142,0.18686440374); +#141142 = AXIS2_PLACEMENT_3D('',#141143,#141144,#141145); +#141143 = CARTESIAN_POINT('',(181.269266,-114.936969,1.585)); +#141144 = DIRECTION('',(0.,0.,1.)); +#141145 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#141146 = ORIENTED_EDGE('',*,*,#141147,.T.); +#141147 = EDGE_CURVE('',#141139,#141148,#141150,.T.); +#141148 = VERTEX_POINT('',#141149); +#141149 = CARTESIAN_POINT('',(181.161736,-114.756252,1.585)); +#141150 = LINE('',#141151,#141152); +#141151 = CARTESIAN_POINT('',(181.316802,-114.756252,1.585)); +#141152 = VECTOR('',#141153,1.); +#141153 = DIRECTION('',(-1.,0.,0.)); +#141154 = ORIENTED_EDGE('',*,*,#141155,.T.); +#141155 = EDGE_CURVE('',#141148,#141156,#141158,.T.); +#141156 = VERTEX_POINT('',#141157); +#141157 = CARTESIAN_POINT('',(181.123793,-114.775223,1.585)); +#141158 = LINE('',#141159,#141160); +#141159 = CARTESIAN_POINT('',(181.161736,-114.756252,1.585)); +#141160 = VECTOR('',#141161,1.); +#141161 = DIRECTION('',(-0.894431905558,-0.447204166259,0.)); +#141162 = ORIENTED_EDGE('',*,*,#141163,.T.); +#141163 = EDGE_CURVE('',#141156,#141164,#141166,.T.); +#141164 = VERTEX_POINT('',#141165); +#141165 = CARTESIAN_POINT('',(181.123793,-115.253947,1.585)); +#141166 = LINE('',#141167,#141168); +#141167 = CARTESIAN_POINT('',(181.123793,-114.775223,1.585)); +#141168 = VECTOR('',#141169,1.); +#141169 = DIRECTION('',(0.,-1.,0.)); +#141170 = ORIENTED_EDGE('',*,*,#141171,.T.); +#141171 = EDGE_CURVE('',#141164,#141172,#141174,.T.); +#141172 = VERTEX_POINT('',#141173); +#141173 = CARTESIAN_POINT('',(181.161736,-115.272919,1.585)); +#141174 = LINE('',#141175,#141176); +#141175 = CARTESIAN_POINT('',(181.123793,-115.253947,1.585)); +#141176 = VECTOR('',#141177,1.); +#141177 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#141178 = ORIENTED_EDGE('',*,*,#141179,.T.); +#141179 = EDGE_CURVE('',#141172,#141180,#141182,.T.); +#141180 = VERTEX_POINT('',#141181); +#141181 = CARTESIAN_POINT('',(181.316802,-115.272919,1.585)); +#141182 = LINE('',#141183,#141184); +#141183 = CARTESIAN_POINT('',(181.161736,-115.272919,1.585)); +#141184 = VECTOR('',#141185,1.); +#141185 = DIRECTION('',(1.,0.,0.)); +#141186 = ORIENTED_EDGE('',*,*,#141187,.T.); +#141187 = EDGE_CURVE('',#141180,#141188,#141190,.T.); +#141188 = VERTEX_POINT('',#141189); +#141189 = CARTESIAN_POINT('',(181.449983,-115.139737,1.585)); +#141190 = CIRCLE('',#141191,0.186867760544); +#141191 = AXIS2_PLACEMENT_3D('',#141192,#141193,#141194); +#141192 = CARTESIAN_POINT('',(181.26926296928,-115.0921993262,1.585)); +#141193 = DIRECTION('',(0.,0.,1.)); +#141194 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#141195 = ORIENTED_EDGE('',*,*,#141196,.T.); +#141196 = EDGE_CURVE('',#141188,#141137,#141197,.T.); +#141197 = LINE('',#141198,#141199); +#141198 = CARTESIAN_POINT('',(181.449983,-115.139737,1.585)); +#141199 = VECTOR('',#141200,1.); +#141200 = DIRECTION('',(0.,1.,0.)); +#141201 = PLANE('',#141202); +#141202 = AXIS2_PLACEMENT_3D('',#141203,#141204,#141205); +#141203 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141204 = DIRECTION('',(0.,0.,1.)); +#141205 = DIRECTION('',(1.,0.,-0.)); +#141206 = SHELL_BASED_SURFACE_MODEL('',(#141207)); +#141207 = OPEN_SHELL('',(#141208)); +#141208 = ADVANCED_FACE('',(#141209),#141269,.T.); +#141209 = FACE_BOUND('',#141210,.F.); +#141210 = EDGE_LOOP('',(#141211,#141222,#141230,#141238,#141246,#141254, + #141263)); +#141211 = ORIENTED_EDGE('',*,*,#141212,.T.); +#141212 = EDGE_CURVE('',#141213,#141215,#141217,.T.); +#141213 = VERTEX_POINT('',#141214); +#141214 = CARTESIAN_POINT('',(199.98165,-115.4331,1.585)); +#141215 = VERTEX_POINT('',#141216); +#141216 = CARTESIAN_POINT('',(199.933126,-115.33781,1.585)); +#141217 = CIRCLE('',#141218,6.000027696175E-02); +#141218 = AXIS2_PLACEMENT_3D('',#141219,#141220,#141221); +#141219 = CARTESIAN_POINT('',(199.98165092846,-115.373099723,1.585)); +#141220 = DIRECTION('',(0.,0.,-1.)); +#141221 = DIRECTION('',(-1.54744015912E-05,-0.99999999988,-0.)); +#141222 = ORIENTED_EDGE('',*,*,#141223,.T.); +#141223 = EDGE_CURVE('',#141215,#141224,#141226,.T.); +#141224 = VERTEX_POINT('',#141225); +#141225 = CARTESIAN_POINT('',(200.173126,-115.00781,1.585)); +#141226 = LINE('',#141227,#141228); +#141227 = CARTESIAN_POINT('',(199.933126,-115.33781,1.585)); +#141228 = VECTOR('',#141229,1.); +#141229 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#141230 = ORIENTED_EDGE('',*,*,#141231,.T.); +#141231 = EDGE_CURVE('',#141224,#141232,#141234,.T.); +#141232 = VERTEX_POINT('',#141233); +#141233 = CARTESIAN_POINT('',(200.212292,-114.983834,1.585)); +#141234 = LINE('',#141235,#141236); +#141235 = CARTESIAN_POINT('',(200.173126,-115.00781,1.585)); +#141236 = VECTOR('',#141237,1.); +#141237 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#141238 = ORIENTED_EDGE('',*,*,#141239,.T.); +#141239 = EDGE_CURVE('',#141232,#141240,#141242,.T.); +#141240 = VERTEX_POINT('',#141241); +#141241 = CARTESIAN_POINT('',(200.25694,-114.994576,1.585)); +#141242 = LINE('',#141243,#141244); +#141243 = CARTESIAN_POINT('',(200.212292,-114.983834,1.585)); +#141244 = VECTOR('',#141245,1.); +#141245 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#141246 = ORIENTED_EDGE('',*,*,#141247,.T.); +#141247 = EDGE_CURVE('',#141240,#141248,#141250,.T.); +#141248 = VERTEX_POINT('',#141249); +#141249 = CARTESIAN_POINT('',(200.510174,-115.33781,1.585)); +#141250 = LINE('',#141251,#141252); +#141251 = CARTESIAN_POINT('',(200.25694,-114.994576,1.585)); +#141252 = VECTOR('',#141253,1.); +#141253 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#141254 = ORIENTED_EDGE('',*,*,#141255,.T.); +#141255 = EDGE_CURVE('',#141248,#141256,#141258,.T.); +#141256 = VERTEX_POINT('',#141257); +#141257 = CARTESIAN_POINT('',(200.46165,-115.4331,1.585)); +#141258 = CIRCLE('',#141259,5.999941814202E-02); +#141259 = AXIS2_PLACEMENT_3D('',#141260,#141261,#141262); +#141260 = CARTESIAN_POINT('',(200.46165075805,-115.3731005818,1.585)); +#141261 = DIRECTION('',(0.,0.,-1.)); +#141262 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#141263 = ORIENTED_EDGE('',*,*,#141264,.T.); +#141264 = EDGE_CURVE('',#141256,#141213,#141265,.T.); +#141265 = LINE('',#141266,#141267); +#141266 = CARTESIAN_POINT('',(200.46165,-115.4331,1.585)); +#141267 = VECTOR('',#141268,1.); +#141268 = DIRECTION('',(-1.,0.,0.)); +#141269 = PLANE('',#141270); +#141270 = AXIS2_PLACEMENT_3D('',#141271,#141272,#141273); +#141271 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141272 = DIRECTION('',(0.,0.,1.)); +#141273 = DIRECTION('',(1.,0.,-0.)); +#141274 = SHELL_BASED_SURFACE_MODEL('',(#141275)); +#141275 = OPEN_SHELL('',(#141276)); +#141276 = ADVANCED_FACE('',(#141277),#141436,.T.); +#141277 = FACE_BOUND('',#141278,.F.); +#141278 = EDGE_LOOP('',(#141279,#141290,#141298,#141306,#141314,#141322, + #141330,#141338,#141347,#141355,#141364,#141372,#141380,#141388, + #141397,#141405,#141413,#141421,#141430)); +#141279 = ORIENTED_EDGE('',*,*,#141280,.T.); +#141280 = EDGE_CURVE('',#141281,#141283,#141285,.T.); +#141281 = VERTEX_POINT('',#141282); +#141282 = CARTESIAN_POINT('',(181.920014,-114.328456,1.585)); +#141283 = VERTEX_POINT('',#141284); +#141284 = CARTESIAN_POINT('',(182.429409,-114.337786,1.585)); +#141285 = CIRCLE('',#141286,0.450326844012); +#141286 = AXIS2_PLACEMENT_3D('',#141287,#141288,#141289); +#141287 = CARTESIAN_POINT('',(182.1679110301,-114.7044098919,1.585)); +#141288 = DIRECTION('',(0.,0.,-1.)); +#141289 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#141290 = ORIENTED_EDGE('',*,*,#141291,.T.); +#141291 = EDGE_CURVE('',#141283,#141292,#141294,.T.); +#141292 = VERTEX_POINT('',#141293); +#141293 = CARTESIAN_POINT('',(182.492862,-114.403316,1.585)); +#141294 = LINE('',#141295,#141296); +#141295 = CARTESIAN_POINT('',(182.429409,-114.337786,1.585)); +#141296 = VECTOR('',#141297,1.); +#141297 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#141298 = ORIENTED_EDGE('',*,*,#141299,.T.); +#141299 = EDGE_CURVE('',#141292,#141300,#141302,.T.); +#141300 = VERTEX_POINT('',#141301); +#141301 = CARTESIAN_POINT('',(182.550923,-114.523763,1.585)); +#141302 = LINE('',#141303,#141304); +#141303 = CARTESIAN_POINT('',(182.492862,-114.403316,1.585)); +#141304 = VECTOR('',#141305,1.); +#141305 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#141306 = ORIENTED_EDGE('',*,*,#141307,.T.); +#141307 = EDGE_CURVE('',#141300,#141308,#141310,.T.); +#141308 = VERTEX_POINT('',#141309); +#141309 = CARTESIAN_POINT('',(182.550164,-114.650095,1.585)); +#141310 = LINE('',#141311,#141312); +#141311 = CARTESIAN_POINT('',(182.550923,-114.523763,1.585)); +#141312 = VECTOR('',#141313,1.); +#141313 = DIRECTION('',(-6.007870547659E-03,-0.999981952583,0.)); +#141314 = ORIENTED_EDGE('',*,*,#141315,.T.); +#141315 = EDGE_CURVE('',#141308,#141316,#141318,.T.); +#141316 = VERTEX_POINT('',#141317); +#141317 = CARTESIAN_POINT('',(182.492106,-114.818158,1.585)); +#141318 = LINE('',#141319,#141320); +#141319 = CARTESIAN_POINT('',(182.550164,-114.650095,1.585)); +#141320 = VECTOR('',#141321,1.); +#141321 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#141322 = ORIENTED_EDGE('',*,*,#141323,.T.); +#141323 = EDGE_CURVE('',#141316,#141324,#141326,.T.); +#141324 = VERTEX_POINT('',#141325); +#141325 = CARTESIAN_POINT('',(182.039383,-115.272919,1.585)); +#141326 = LINE('',#141327,#141328); +#141327 = CARTESIAN_POINT('',(182.492106,-114.818158,1.585)); +#141328 = VECTOR('',#141329,1.); +#141329 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#141330 = ORIENTED_EDGE('',*,*,#141331,.T.); +#141331 = EDGE_CURVE('',#141324,#141332,#141334,.T.); +#141332 = VERTEX_POINT('',#141333); +#141333 = CARTESIAN_POINT('',(182.491996,-115.27436,1.585)); +#141334 = LINE('',#141335,#141336); +#141335 = CARTESIAN_POINT('',(182.039383,-115.272919,1.585)); +#141336 = VECTOR('',#141337,1.); +#141337 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#141338 = ORIENTED_EDGE('',*,*,#141339,.T.); +#141339 = EDGE_CURVE('',#141332,#141340,#141342,.T.); +#141340 = VERTEX_POINT('',#141341); +#141341 = CARTESIAN_POINT('',(182.477364,-115.422919,1.585)); +#141342 = CIRCLE('',#141343,7.500006711463E-02); +#141343 = AXIS2_PLACEMENT_3D('',#141344,#141345,#141346); +#141344 = CARTESIAN_POINT('',(182.47736406711,-115.3479189328,1.585)); +#141345 = DIRECTION('',(0.,0.,-1.)); +#141346 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#141347 = ORIENTED_EDGE('',*,*,#141348,.T.); +#141348 = EDGE_CURVE('',#141340,#141349,#141351,.T.); +#141349 = VERTEX_POINT('',#141350); +#141350 = CARTESIAN_POINT('',(181.843685,-115.421478,1.585)); +#141351 = LINE('',#141352,#141353); +#141352 = CARTESIAN_POINT('',(182.477364,-115.422919,1.585)); +#141353 = VECTOR('',#141354,1.); +#141354 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#141355 = ORIENTED_EDGE('',*,*,#141356,.T.); +#141356 = EDGE_CURVE('',#141349,#141357,#141359,.T.); +#141357 = VERTEX_POINT('',#141358); +#141358 = CARTESIAN_POINT('',(181.805284,-115.294886,1.585)); +#141359 = CIRCLE('',#141360,7.500021013107E-02); +#141360 = AXIS2_PLACEMENT_3D('',#141361,#141362,#141363); +#141361 = CARTESIAN_POINT('',(181.8583173167,-115.3479189976,1.585)); +#141362 = DIRECTION('',(0.,0.,-1.)); +#141363 = DIRECTION('',(-0.195097009435,-0.980783950169,-0.)); +#141364 = ORIENTED_EDGE('',*,*,#141365,.T.); +#141365 = EDGE_CURVE('',#141357,#141366,#141368,.T.); +#141366 = VERTEX_POINT('',#141367); +#141367 = CARTESIAN_POINT('',(182.364192,-114.735976,1.585)); +#141368 = LINE('',#141369,#141370); +#141369 = CARTESIAN_POINT('',(181.805284,-115.294886,1.585)); +#141370 = VECTOR('',#141371,1.); +#141371 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#141372 = ORIENTED_EDGE('',*,*,#141373,.T.); +#141373 = EDGE_CURVE('',#141366,#141374,#141376,.T.); +#141374 = VERTEX_POINT('',#141375); +#141375 = CARTESIAN_POINT('',(182.402364,-114.621463,1.585)); +#141376 = LINE('',#141377,#141378); +#141377 = CARTESIAN_POINT('',(182.364192,-114.735976,1.585)); +#141378 = VECTOR('',#141379,1.); +#141379 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#141380 = ORIENTED_EDGE('',*,*,#141381,.T.); +#141381 = EDGE_CURVE('',#141374,#141382,#141384,.T.); +#141382 = VERTEX_POINT('',#141383); +#141383 = CARTESIAN_POINT('',(182.402364,-114.5561,1.585)); +#141384 = LINE('',#141385,#141386); +#141385 = CARTESIAN_POINT('',(182.402364,-114.621463,1.585)); +#141386 = VECTOR('',#141387,1.); +#141387 = DIRECTION('',(0.,1.,0.)); +#141388 = ORIENTED_EDGE('',*,*,#141389,.T.); +#141389 = EDGE_CURVE('',#141382,#141390,#141392,.T.); +#141390 = VERTEX_POINT('',#141391); +#141391 = CARTESIAN_POINT('',(182.269183,-114.422919,1.585)); +#141392 = CIRCLE('',#141393,0.18686440374); +#141393 = AXIS2_PLACEMENT_3D('',#141394,#141395,#141396); +#141394 = CARTESIAN_POINT('',(182.221647,-114.603636,1.585)); +#141395 = DIRECTION('',(0.,0.,1.)); +#141396 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#141397 = ORIENTED_EDGE('',*,*,#141398,.T.); +#141398 = EDGE_CURVE('',#141390,#141399,#141401,.T.); +#141399 = VERTEX_POINT('',#141400); +#141400 = CARTESIAN_POINT('',(182.066498,-114.422919,1.585)); +#141401 = LINE('',#141402,#141403); +#141402 = CARTESIAN_POINT('',(182.269183,-114.422919,1.585)); +#141403 = VECTOR('',#141404,1.); +#141404 = DIRECTION('',(-1.,0.,0.)); +#141405 = ORIENTED_EDGE('',*,*,#141406,.T.); +#141406 = EDGE_CURVE('',#141399,#141407,#141409,.T.); +#141407 = VERTEX_POINT('',#141408); +#141408 = CARTESIAN_POINT('',(181.997982,-114.457177,1.585)); +#141409 = LINE('',#141410,#141411); +#141410 = CARTESIAN_POINT('',(182.066498,-114.422919,1.585)); +#141411 = VECTOR('',#141412,1.); +#141412 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#141413 = ORIENTED_EDGE('',*,*,#141414,.T.); +#141414 = EDGE_CURVE('',#141407,#141415,#141417,.T.); +#141415 = VERTEX_POINT('',#141416); +#141416 = CARTESIAN_POINT('',(181.947604,-114.505517,1.585)); +#141417 = LINE('',#141418,#141419); +#141418 = CARTESIAN_POINT('',(181.997982,-114.457177,1.585)); +#141419 = VECTOR('',#141420,1.); +#141420 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#141421 = ORIENTED_EDGE('',*,*,#141422,.T.); +#141422 = EDGE_CURVE('',#141415,#141423,#141425,.T.); +#141423 = VERTEX_POINT('',#141424); +#141424 = CARTESIAN_POINT('',(181.852903,-114.390124,1.585)); +#141425 = CIRCLE('',#141426,7.499996838527E-02); +#141426 = AXIS2_PLACEMENT_3D('',#141427,#141428,#141429); +#141427 = CARTESIAN_POINT('',(181.905936,-114.4431569724,1.585)); +#141428 = DIRECTION('',(0.,0.,-1.)); +#141429 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#141430 = ORIENTED_EDGE('',*,*,#141431,.T.); +#141431 = EDGE_CURVE('',#141423,#141281,#141432,.T.); +#141432 = LINE('',#141433,#141434); +#141433 = CARTESIAN_POINT('',(181.852903,-114.390124,1.585)); +#141434 = VECTOR('',#141435,1.); +#141435 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#141436 = PLANE('',#141437); +#141437 = AXIS2_PLACEMENT_3D('',#141438,#141439,#141440); +#141438 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141439 = DIRECTION('',(0.,0.,1.)); +#141440 = DIRECTION('',(1.,0.,-0.)); +#141441 = SHELL_BASED_SURFACE_MODEL('',(#141442)); +#141442 = OPEN_SHELL('',(#141443)); +#141443 = ADVANCED_FACE('',(#141444,#141555),#141607,.T.); +#141444 = FACE_BOUND('',#141445,.F.); +#141445 = EDGE_LOOP('',(#141446,#141457,#141465,#141474,#141482,#141491, + #141499,#141507,#141516,#141524,#141532,#141540,#141549)); +#141446 = ORIENTED_EDGE('',*,*,#141447,.T.); +#141447 = EDGE_CURVE('',#141448,#141450,#141452,.T.); +#141448 = VERTEX_POINT('',#141449); +#141449 = CARTESIAN_POINT('',(176.879996,-114.333287,1.585)); +#141450 = VERTEX_POINT('',#141451); +#141451 = CARTESIAN_POINT('',(176.953555,-114.272919,1.585)); +#141452 = CIRCLE('',#141453,7.500074938986E-02); +#141453 = AXIS2_PLACEMENT_3D('',#141454,#141455,#141456); +#141454 = CARTESIAN_POINT('',(176.95355546611,-114.3479197493,1.585)); +#141455 = DIRECTION('',(0.,0.,-1.)); +#141456 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#141457 = ORIENTED_EDGE('',*,*,#141458,.T.); +#141458 = EDGE_CURVE('',#141450,#141459,#141461,.T.); +#141459 = VERTEX_POINT('',#141460); +#141460 = CARTESIAN_POINT('',(177.349139,-114.27436,1.585)); +#141461 = LINE('',#141462,#141463); +#141462 = CARTESIAN_POINT('',(176.953555,-114.272919,1.585)); +#141463 = VECTOR('',#141464,1.); +#141464 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#141465 = ORIENTED_EDGE('',*,*,#141466,.T.); +#141466 = EDGE_CURVE('',#141459,#141467,#141469,.T.); +#141467 = VERTEX_POINT('',#141468); +#141468 = CARTESIAN_POINT('',(177.598542,-114.523763,1.585)); +#141469 = CIRCLE('',#141470,0.347870264855); +#141470 = AXIS2_PLACEMENT_3D('',#141471,#141472,#141473); +#141471 = CARTESIAN_POINT('',(177.26181126502,-114.6110907349,1.585)); +#141472 = DIRECTION('',(0.,0.,-1.)); +#141473 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#141474 = ORIENTED_EDGE('',*,*,#141475,.T.); +#141475 = EDGE_CURVE('',#141467,#141476,#141478,.T.); +#141476 = VERTEX_POINT('',#141477); +#141477 = CARTESIAN_POINT('',(177.59732,-114.701062,1.585)); +#141478 = LINE('',#141479,#141480); +#141479 = CARTESIAN_POINT('',(177.598542,-114.523763,1.585)); +#141480 = VECTOR('',#141481,1.); +#141481 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#141482 = ORIENTED_EDGE('',*,*,#141483,.T.); +#141483 = EDGE_CURVE('',#141476,#141484,#141486,.T.); +#141484 = VERTEX_POINT('',#141485); +#141485 = CARTESIAN_POINT('',(177.349139,-114.945287,1.585)); +#141486 = CIRCLE('',#141487,0.348632345849); +#141487 = AXIS2_PLACEMENT_3D('',#141488,#141489,#141490); +#141488 = CARTESIAN_POINT('',(177.26137019403,-114.6078834593,1.585)); +#141489 = DIRECTION('',(0.,0.,-1.)); +#141490 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#141491 = ORIENTED_EDGE('',*,*,#141492,.T.); +#141492 = EDGE_CURVE('',#141484,#141493,#141495,.T.); +#141493 = VERTEX_POINT('',#141494); +#141494 = CARTESIAN_POINT('',(177.335622,-114.946618,1.585)); +#141495 = LINE('',#141496,#141497); +#141496 = CARTESIAN_POINT('',(177.349139,-114.945287,1.585)); +#141497 = VECTOR('',#141498,1.); +#141498 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#141499 = ORIENTED_EDGE('',*,*,#141500,.T.); +#141500 = EDGE_CURVE('',#141493,#141501,#141503,.T.); +#141501 = VERTEX_POINT('',#141502); +#141502 = CARTESIAN_POINT('',(177.593636,-115.317723,1.585)); +#141503 = LINE('',#141504,#141505); +#141504 = CARTESIAN_POINT('',(177.335622,-114.946618,1.585)); +#141505 = VECTOR('',#141506,1.); +#141506 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#141507 = ORIENTED_EDGE('',*,*,#141508,.T.); +#141508 = EDGE_CURVE('',#141501,#141509,#141511,.T.); +#141509 = VERTEX_POINT('',#141510); +#141510 = CARTESIAN_POINT('',(177.463541,-115.390929,1.585)); +#141511 = CIRCLE('',#141512,7.500005951703E-02); +#141512 = AXIS2_PLACEMENT_3D('',#141513,#141514,#141515); +#141513 = CARTESIAN_POINT('',(177.52498306294,-115.3479187473,1.585)); +#141514 = DIRECTION('',(0.,0.,-1.)); +#141515 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#141516 = ORIENTED_EDGE('',*,*,#141517,.T.); +#141517 = EDGE_CURVE('',#141509,#141518,#141520,.T.); +#141518 = VERTEX_POINT('',#141519); +#141519 = CARTESIAN_POINT('',(177.152601,-114.946728,1.585)); +#141520 = LINE('',#141521,#141522); +#141521 = CARTESIAN_POINT('',(177.463541,-115.390929,1.585)); +#141522 = VECTOR('',#141523,1.); +#141523 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#141524 = ORIENTED_EDGE('',*,*,#141525,.T.); +#141525 = EDGE_CURVE('',#141518,#141526,#141528,.T.); +#141526 = VERTEX_POINT('',#141527); +#141527 = CARTESIAN_POINT('',(177.028555,-114.946728,1.585)); +#141528 = LINE('',#141529,#141530); +#141529 = CARTESIAN_POINT('',(177.152601,-114.946728,1.585)); +#141530 = VECTOR('',#141531,1.); +#141531 = DIRECTION('',(-1.,0.,0.)); +#141532 = ORIENTED_EDGE('',*,*,#141533,.T.); +#141533 = EDGE_CURVE('',#141526,#141534,#141536,.T.); +#141534 = VERTEX_POINT('',#141535); +#141535 = CARTESIAN_POINT('',(177.027114,-115.362551,1.585)); +#141536 = LINE('',#141537,#141538); +#141537 = CARTESIAN_POINT('',(177.028555,-114.946728,1.585)); +#141538 = VECTOR('',#141539,1.); +#141539 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#141540 = ORIENTED_EDGE('',*,*,#141541,.T.); +#141541 = EDGE_CURVE('',#141534,#141542,#141544,.T.); +#141542 = VERTEX_POINT('',#141543); +#141543 = CARTESIAN_POINT('',(176.878555,-115.347919,1.585)); +#141544 = CIRCLE('',#141545,7.500006711464E-02); +#141545 = AXIS2_PLACEMENT_3D('',#141546,#141547,#141548); +#141546 = CARTESIAN_POINT('',(176.95355506711,-115.3479190671,1.585)); +#141547 = DIRECTION('',(-0.,0.,-1.)); +#141548 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#141549 = ORIENTED_EDGE('',*,*,#141550,.T.); +#141550 = EDGE_CURVE('',#141542,#141448,#141551,.T.); +#141551 = LINE('',#141552,#141553); +#141552 = CARTESIAN_POINT('',(176.878555,-115.347919,1.585)); +#141553 = VECTOR('',#141554,1.); +#141554 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#141555 = FACE_BOUND('',#141556,.F.); +#141556 = EDGE_LOOP('',(#141557,#141568,#141576,#141584,#141592,#141601) + ); +#141557 = ORIENTED_EDGE('',*,*,#141558,.T.); +#141558 = EDGE_CURVE('',#141559,#141561,#141563,.T.); +#141559 = VERTEX_POINT('',#141560); +#141560 = CARTESIAN_POINT('',(177.449983,-114.5561,1.585)); +#141561 = VERTEX_POINT('',#141562); +#141562 = CARTESIAN_POINT('',(177.316802,-114.422919,1.585)); +#141563 = CIRCLE('',#141564,0.18686440374); +#141564 = AXIS2_PLACEMENT_3D('',#141565,#141566,#141567); +#141565 = CARTESIAN_POINT('',(177.269266,-114.603636,1.585)); +#141566 = DIRECTION('',(0.,0.,1.)); +#141567 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#141568 = ORIENTED_EDGE('',*,*,#141569,.T.); +#141569 = EDGE_CURVE('',#141561,#141570,#141572,.T.); +#141570 = VERTEX_POINT('',#141571); +#141571 = CARTESIAN_POINT('',(177.028555,-114.422919,1.585)); +#141572 = LINE('',#141573,#141574); +#141573 = CARTESIAN_POINT('',(177.316802,-114.422919,1.585)); +#141574 = VECTOR('',#141575,1.); +#141575 = DIRECTION('',(-1.,0.,0.)); +#141576 = ORIENTED_EDGE('',*,*,#141577,.T.); +#141577 = EDGE_CURVE('',#141570,#141578,#141580,.T.); +#141578 = VERTEX_POINT('',#141579); +#141579 = CARTESIAN_POINT('',(177.028555,-114.796728,1.585)); +#141580 = LINE('',#141581,#141582); +#141581 = CARTESIAN_POINT('',(177.028555,-114.422919,1.585)); +#141582 = VECTOR('',#141583,1.); +#141583 = DIRECTION('',(0.,-1.,0.)); +#141584 = ORIENTED_EDGE('',*,*,#141585,.T.); +#141585 = EDGE_CURVE('',#141578,#141586,#141588,.T.); +#141586 = VERTEX_POINT('',#141587); +#141587 = CARTESIAN_POINT('',(177.316802,-114.796728,1.585)); +#141588 = LINE('',#141589,#141590); +#141589 = CARTESIAN_POINT('',(177.028555,-114.796728,1.585)); +#141590 = VECTOR('',#141591,1.); +#141591 = DIRECTION('',(1.,0.,0.)); +#141592 = ORIENTED_EDGE('',*,*,#141593,.T.); +#141593 = EDGE_CURVE('',#141586,#141594,#141596,.T.); +#141594 = VERTEX_POINT('',#141595); +#141595 = CARTESIAN_POINT('',(177.449983,-114.663547,1.585)); +#141596 = CIRCLE('',#141597,0.18686440374); +#141597 = AXIS2_PLACEMENT_3D('',#141598,#141599,#141600); +#141598 = CARTESIAN_POINT('',(177.269266,-114.616011,1.585)); +#141599 = DIRECTION('',(0.,0.,1.)); +#141600 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#141601 = ORIENTED_EDGE('',*,*,#141602,.T.); +#141602 = EDGE_CURVE('',#141594,#141559,#141603,.T.); +#141603 = LINE('',#141604,#141605); +#141604 = CARTESIAN_POINT('',(177.449983,-114.663547,1.585)); +#141605 = VECTOR('',#141606,1.); +#141606 = DIRECTION('',(0.,1.,0.)); +#141607 = PLANE('',#141608); +#141608 = AXIS2_PLACEMENT_3D('',#141609,#141610,#141611); +#141609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141610 = DIRECTION('',(0.,0.,1.)); +#141611 = DIRECTION('',(1.,0.,-0.)); +#141612 = SHELL_BASED_SURFACE_MODEL('',(#141613)); +#141613 = OPEN_SHELL('',(#141614)); +#141614 = ADVANCED_FACE('',(#141615),#141800,.T.); +#141615 = FACE_BOUND('',#141616,.F.); +#141616 = EDGE_LOOP('',(#141617,#141628,#141636,#141645,#141653,#141662, + #141670,#141679,#141687,#141695,#141703,#141712,#141720,#141729, + #141737,#141746,#141754,#141762,#141770,#141778,#141786,#141794)); +#141617 = ORIENTED_EDGE('',*,*,#141618,.T.); +#141618 = EDGE_CURVE('',#141619,#141621,#141623,.T.); +#141619 = VERTEX_POINT('',#141620); +#141620 = CARTESIAN_POINT('',(91.559269,-114.330381,1.585)); +#141621 = VERTEX_POINT('',#141622); +#141622 = CARTESIAN_POINT('',(92.019032,-114.333178,1.585)); +#141623 = CIRCLE('',#141624,0.460785175821); +#141624 = AXIS2_PLACEMENT_3D('',#141625,#141626,#141627); +#141625 = CARTESIAN_POINT('',(91.786721108972,-114.7311159702,1.585)); +#141626 = DIRECTION('',(0.,0.,-1.)); +#141627 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#141628 = ORIENTED_EDGE('',*,*,#141629,.T.); +#141629 = EDGE_CURVE('',#141621,#141630,#141632,.T.); +#141630 = VERTEX_POINT('',#141631); +#141631 = CARTESIAN_POINT('',(92.087343,-114.401489,1.585)); +#141632 = LINE('',#141633,#141634); +#141633 = CARTESIAN_POINT('',(92.019032,-114.333178,1.585)); +#141634 = VECTOR('',#141635,1.); +#141635 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#141636 = ORIENTED_EDGE('',*,*,#141637,.T.); +#141637 = EDGE_CURVE('',#141630,#141638,#141640,.T.); +#141638 = VERTEX_POINT('',#141639); +#141639 = CARTESIAN_POINT('',(91.97195,-114.49619,1.585)); +#141640 = CIRCLE('',#141641,7.500003178655E-02); +#141641 = AXIS2_PLACEMENT_3D('',#141642,#141643,#141644); +#141642 = CARTESIAN_POINT('',(92.024982562127,-114.4431565,1.585)); +#141643 = DIRECTION('',(0.,0.,-1.)); +#141644 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#141645 = ORIENTED_EDGE('',*,*,#141646,.T.); +#141646 = EDGE_CURVE('',#141638,#141647,#141649,.T.); +#141647 = VERTEX_POINT('',#141648); +#141648 = CARTESIAN_POINT('',(91.93685,-114.46109,1.585)); +#141649 = LINE('',#141650,#141651); +#141650 = CARTESIAN_POINT('',(91.97195,-114.49619,1.585)); +#141651 = VECTOR('',#141652,1.); +#141652 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#141653 = ORIENTED_EDGE('',*,*,#141654,.T.); +#141654 = EDGE_CURVE('',#141647,#141655,#141657,.T.); +#141655 = VERTEX_POINT('',#141656); +#141656 = CARTESIAN_POINT('',(91.636926,-114.46109,1.585)); +#141657 = CIRCLE('',#141658,0.299308637371); +#141658 = AXIS2_PLACEMENT_3D('',#141659,#141660,#141661); +#141659 = CARTESIAN_POINT('',(91.786888,-114.720121,1.585)); +#141660 = DIRECTION('',(0.,0.,1.)); +#141661 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#141662 = ORIENTED_EDGE('',*,*,#141663,.T.); +#141663 = EDGE_CURVE('',#141655,#141664,#141666,.T.); +#141664 = VERTEX_POINT('',#141665); +#141665 = CARTESIAN_POINT('',(91.562813,-114.535203,1.585)); +#141666 = LINE('',#141667,#141668); +#141667 = CARTESIAN_POINT('',(91.636926,-114.46109,1.585)); +#141668 = VECTOR('',#141669,1.); +#141669 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#141670 = ORIENTED_EDGE('',*,*,#141671,.T.); +#141671 = EDGE_CURVE('',#141664,#141672,#141674,.T.); +#141672 = VERTEX_POINT('',#141673); +#141673 = CARTESIAN_POINT('',(91.480936,-114.910113,1.585)); +#141674 = CIRCLE('',#141675,0.611712714363); +#141675 = AXIS2_PLACEMENT_3D('',#141676,#141677,#141678); +#141676 = CARTESIAN_POINT('',(92.089341275217,-114.8465876822,1.585)); +#141677 = DIRECTION('',(0.,0.,1.)); +#141678 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#141679 = ORIENTED_EDGE('',*,*,#141680,.T.); +#141680 = EDGE_CURVE('',#141672,#141681,#141683,.T.); +#141681 = VERTEX_POINT('',#141682); +#141682 = CARTESIAN_POINT('',(91.524319,-115.083647,1.585)); +#141683 = LINE('',#141684,#141685); +#141684 = CARTESIAN_POINT('',(91.480936,-114.910113,1.585)); +#141685 = VECTOR('',#141686,1.); +#141686 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#141687 = ORIENTED_EDGE('',*,*,#141688,.T.); +#141688 = EDGE_CURVE('',#141681,#141689,#141691,.T.); +#141689 = VERTEX_POINT('',#141690); +#141690 = CARTESIAN_POINT('',(91.562813,-115.160634,1.585)); +#141691 = LINE('',#141692,#141693); +#141692 = CARTESIAN_POINT('',(91.524319,-115.083647,1.585)); +#141693 = VECTOR('',#141694,1.); +#141694 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#141695 = ORIENTED_EDGE('',*,*,#141696,.T.); +#141696 = EDGE_CURVE('',#141689,#141697,#141699,.T.); +#141697 = VERTEX_POINT('',#141698); +#141698 = CARTESIAN_POINT('',(91.636926,-115.234748,1.585)); +#141699 = LINE('',#141700,#141701); +#141700 = CARTESIAN_POINT('',(91.562813,-115.160634,1.585)); +#141701 = VECTOR('',#141702,1.); +#141702 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#141703 = ORIENTED_EDGE('',*,*,#141704,.T.); +#141704 = EDGE_CURVE('',#141697,#141705,#141707,.T.); +#141705 = VERTEX_POINT('',#141706); +#141706 = CARTESIAN_POINT('',(91.93685,-115.234747,1.585)); +#141707 = CIRCLE('',#141708,0.299305962385); +#141708 = AXIS2_PLACEMENT_3D('',#141709,#141710,#141711); +#141709 = CARTESIAN_POINT('',(91.786887136355,-114.9757195909,1.585)); +#141710 = DIRECTION('',(0.,0.,1.)); +#141711 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#141712 = ORIENTED_EDGE('',*,*,#141713,.T.); +#141713 = EDGE_CURVE('',#141705,#141714,#141716,.T.); +#141714 = VERTEX_POINT('',#141715); +#141715 = CARTESIAN_POINT('',(91.983315,-115.19032,1.585)); +#141716 = LINE('',#141717,#141718); +#141717 = CARTESIAN_POINT('',(91.93685,-115.234747,1.585)); +#141718 = VECTOR('',#141719,1.); +#141719 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#141720 = ORIENTED_EDGE('',*,*,#141721,.T.); +#141721 = EDGE_CURVE('',#141714,#141722,#141724,.T.); +#141722 = VERTEX_POINT('',#141723); +#141723 = CARTESIAN_POINT('',(92.078016,-115.305713,1.585)); +#141724 = CIRCLE('',#141725,7.499993690112E-02); +#141725 = AXIS2_PLACEMENT_3D('',#141726,#141727,#141728); +#141726 = CARTESIAN_POINT('',(92.024983248309,-115.2526798237,1.585)); +#141727 = DIRECTION('',(0.,0.,-1.)); +#141728 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#141729 = ORIENTED_EDGE('',*,*,#141730,.T.); +#141730 = EDGE_CURVE('',#141722,#141731,#141733,.T.); +#141731 = VERTEX_POINT('',#141732); +#141732 = CARTESIAN_POINT('',(92.014506,-115.365457,1.585)); +#141733 = LINE('',#141734,#141735); +#141734 = CARTESIAN_POINT('',(92.078016,-115.305713,1.585)); +#141735 = VECTOR('',#141736,1.); +#141736 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#141737 = ORIENTED_EDGE('',*,*,#141738,.T.); +#141738 = EDGE_CURVE('',#141731,#141739,#141741,.T.); +#141739 = VERTEX_POINT('',#141740); +#141740 = CARTESIAN_POINT('',(91.554744,-115.362661,1.585)); +#141741 = CIRCLE('',#141742,0.461067828848); +#141742 = AXIS2_PLACEMENT_3D('',#141743,#141744,#141745); +#141743 = CARTESIAN_POINT('',(91.787055512688,-114.9643961335,1.585)); +#141744 = DIRECTION('',(-0.,0.,-1.)); +#141745 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#141746 = ORIENTED_EDGE('',*,*,#141747,.T.); +#141747 = EDGE_CURVE('',#141739,#141748,#141750,.T.); +#141748 = VERTEX_POINT('',#141749); +#141749 = CARTESIAN_POINT('',(91.438055,-115.244898,1.585)); +#141750 = LINE('',#141751,#141752); +#141751 = CARTESIAN_POINT('',(91.554744,-115.362661,1.585)); +#141752 = VECTOR('',#141753,1.); +#141753 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#141754 = ORIENTED_EDGE('',*,*,#141755,.T.); +#141755 = EDGE_CURVE('',#141748,#141756,#141758,.T.); +#141756 = VERTEX_POINT('',#141757); +#141757 = CARTESIAN_POINT('',(91.380794,-115.128013,1.585)); +#141758 = LINE('',#141759,#141760); +#141759 = CARTESIAN_POINT('',(91.438055,-115.244898,1.585)); +#141760 = VECTOR('',#141761,1.); +#141761 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#141762 = ORIENTED_EDGE('',*,*,#141763,.T.); +#141763 = EDGE_CURVE('',#141756,#141764,#141766,.T.); +#141764 = VERTEX_POINT('',#141765); +#141765 = CARTESIAN_POINT('',(91.330936,-114.919347,1.585)); +#141766 = LINE('',#141767,#141768); +#141767 = CARTESIAN_POINT('',(91.380794,-115.128013,1.585)); +#141768 = VECTOR('',#141769,1.); +#141769 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#141770 = ORIENTED_EDGE('',*,*,#141771,.T.); +#141771 = EDGE_CURVE('',#141764,#141772,#141774,.T.); +#141772 = VERTEX_POINT('',#141773); +#141773 = CARTESIAN_POINT('',(91.333175,-114.7583,1.585)); +#141774 = LINE('',#141775,#141776); +#141775 = CARTESIAN_POINT('',(91.330936,-114.919347,1.585)); +#141776 = VECTOR('',#141777,1.); +#141777 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#141778 = ORIENTED_EDGE('',*,*,#141779,.T.); +#141779 = EDGE_CURVE('',#141772,#141780,#141782,.T.); +#141780 = VERTEX_POINT('',#141781); +#141781 = CARTESIAN_POINT('',(91.386473,-114.552473,1.585)); +#141782 = LINE('',#141783,#141784); +#141783 = CARTESIAN_POINT('',(91.333175,-114.7583,1.585)); +#141784 = VECTOR('',#141785,1.); +#141785 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#141786 = ORIENTED_EDGE('',*,*,#141787,.T.); +#141787 = EDGE_CURVE('',#141780,#141788,#141790,.T.); +#141788 = VERTEX_POINT('',#141789); +#141789 = CARTESIAN_POINT('',(91.443422,-114.443492,1.585)); +#141790 = LINE('',#141791,#141792); +#141791 = CARTESIAN_POINT('',(91.386473,-114.552473,1.585)); +#141792 = VECTOR('',#141793,1.); +#141793 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#141794 = ORIENTED_EDGE('',*,*,#141795,.T.); +#141795 = EDGE_CURVE('',#141788,#141619,#141796,.T.); +#141796 = LINE('',#141797,#141798); +#141797 = CARTESIAN_POINT('',(91.443422,-114.443492,1.585)); +#141798 = VECTOR('',#141799,1.); +#141799 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#141800 = PLANE('',#141801); +#141801 = AXIS2_PLACEMENT_3D('',#141802,#141803,#141804); +#141802 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141803 = DIRECTION('',(0.,0.,1.)); +#141804 = DIRECTION('',(1.,0.,-0.)); +#141805 = SHELL_BASED_SURFACE_MODEL('',(#141806)); +#141806 = OPEN_SHELL('',(#141807)); +#141807 = ADVANCED_FACE('',(#141808),#141993,.T.); +#141808 = FACE_BOUND('',#141809,.F.); +#141809 = EDGE_LOOP('',(#141810,#141821,#141829,#141838,#141846,#141855, + #141863,#141872,#141880,#141888,#141896,#141905,#141913,#141922, + #141930,#141939,#141947,#141955,#141963,#141971,#141979,#141987)); +#141810 = ORIENTED_EDGE('',*,*,#141811,.T.); +#141811 = EDGE_CURVE('',#141812,#141814,#141816,.T.); +#141812 = VERTEX_POINT('',#141813); +#141813 = CARTESIAN_POINT('',(95.559269,-114.330381,1.585)); +#141814 = VERTEX_POINT('',#141815); +#141815 = CARTESIAN_POINT('',(96.019032,-114.333178,1.585)); +#141816 = CIRCLE('',#141817,0.460785175821); +#141817 = AXIS2_PLACEMENT_3D('',#141818,#141819,#141820); +#141818 = CARTESIAN_POINT('',(95.786721108972,-114.7311159702,1.585)); +#141819 = DIRECTION('',(0.,0.,-1.)); +#141820 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#141821 = ORIENTED_EDGE('',*,*,#141822,.T.); +#141822 = EDGE_CURVE('',#141814,#141823,#141825,.T.); +#141823 = VERTEX_POINT('',#141824); +#141824 = CARTESIAN_POINT('',(96.087343,-114.401489,1.585)); +#141825 = LINE('',#141826,#141827); +#141826 = CARTESIAN_POINT('',(96.019032,-114.333178,1.585)); +#141827 = VECTOR('',#141828,1.); +#141828 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#141829 = ORIENTED_EDGE('',*,*,#141830,.T.); +#141830 = EDGE_CURVE('',#141823,#141831,#141833,.T.); +#141831 = VERTEX_POINT('',#141832); +#141832 = CARTESIAN_POINT('',(95.97195,-114.49619,1.585)); +#141833 = CIRCLE('',#141834,7.500003178655E-02); +#141834 = AXIS2_PLACEMENT_3D('',#141835,#141836,#141837); +#141835 = CARTESIAN_POINT('',(96.024982562127,-114.4431565,1.585)); +#141836 = DIRECTION('',(0.,0.,-1.)); +#141837 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#141838 = ORIENTED_EDGE('',*,*,#141839,.T.); +#141839 = EDGE_CURVE('',#141831,#141840,#141842,.T.); +#141840 = VERTEX_POINT('',#141841); +#141841 = CARTESIAN_POINT('',(95.93685,-114.46109,1.585)); +#141842 = LINE('',#141843,#141844); +#141843 = CARTESIAN_POINT('',(95.97195,-114.49619,1.585)); +#141844 = VECTOR('',#141845,1.); +#141845 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#141846 = ORIENTED_EDGE('',*,*,#141847,.T.); +#141847 = EDGE_CURVE('',#141840,#141848,#141850,.T.); +#141848 = VERTEX_POINT('',#141849); +#141849 = CARTESIAN_POINT('',(95.636926,-114.46109,1.585)); +#141850 = CIRCLE('',#141851,0.299308637371); +#141851 = AXIS2_PLACEMENT_3D('',#141852,#141853,#141854); +#141852 = CARTESIAN_POINT('',(95.786888,-114.720121,1.585)); +#141853 = DIRECTION('',(0.,0.,1.)); +#141854 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#141855 = ORIENTED_EDGE('',*,*,#141856,.T.); +#141856 = EDGE_CURVE('',#141848,#141857,#141859,.T.); +#141857 = VERTEX_POINT('',#141858); +#141858 = CARTESIAN_POINT('',(95.562813,-114.535203,1.585)); +#141859 = LINE('',#141860,#141861); +#141860 = CARTESIAN_POINT('',(95.636926,-114.46109,1.585)); +#141861 = VECTOR('',#141862,1.); +#141862 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#141863 = ORIENTED_EDGE('',*,*,#141864,.T.); +#141864 = EDGE_CURVE('',#141857,#141865,#141867,.T.); +#141865 = VERTEX_POINT('',#141866); +#141866 = CARTESIAN_POINT('',(95.480936,-114.910113,1.585)); +#141867 = CIRCLE('',#141868,0.611712714363); +#141868 = AXIS2_PLACEMENT_3D('',#141869,#141870,#141871); +#141869 = CARTESIAN_POINT('',(96.089341275217,-114.8465876822,1.585)); +#141870 = DIRECTION('',(0.,0.,1.)); +#141871 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#141872 = ORIENTED_EDGE('',*,*,#141873,.T.); +#141873 = EDGE_CURVE('',#141865,#141874,#141876,.T.); +#141874 = VERTEX_POINT('',#141875); +#141875 = CARTESIAN_POINT('',(95.524319,-115.083647,1.585)); +#141876 = LINE('',#141877,#141878); +#141877 = CARTESIAN_POINT('',(95.480936,-114.910113,1.585)); +#141878 = VECTOR('',#141879,1.); +#141879 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#141880 = ORIENTED_EDGE('',*,*,#141881,.T.); +#141881 = EDGE_CURVE('',#141874,#141882,#141884,.T.); +#141882 = VERTEX_POINT('',#141883); +#141883 = CARTESIAN_POINT('',(95.562813,-115.160634,1.585)); +#141884 = LINE('',#141885,#141886); +#141885 = CARTESIAN_POINT('',(95.524319,-115.083647,1.585)); +#141886 = VECTOR('',#141887,1.); +#141887 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#141888 = ORIENTED_EDGE('',*,*,#141889,.T.); +#141889 = EDGE_CURVE('',#141882,#141890,#141892,.T.); +#141890 = VERTEX_POINT('',#141891); +#141891 = CARTESIAN_POINT('',(95.636926,-115.234748,1.585)); +#141892 = LINE('',#141893,#141894); +#141893 = CARTESIAN_POINT('',(95.562813,-115.160634,1.585)); +#141894 = VECTOR('',#141895,1.); +#141895 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#141896 = ORIENTED_EDGE('',*,*,#141897,.T.); +#141897 = EDGE_CURVE('',#141890,#141898,#141900,.T.); +#141898 = VERTEX_POINT('',#141899); +#141899 = CARTESIAN_POINT('',(95.93685,-115.234747,1.585)); +#141900 = CIRCLE('',#141901,0.299305962385); +#141901 = AXIS2_PLACEMENT_3D('',#141902,#141903,#141904); +#141902 = CARTESIAN_POINT('',(95.786887136355,-114.9757195909,1.585)); +#141903 = DIRECTION('',(0.,0.,1.)); +#141904 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#141905 = ORIENTED_EDGE('',*,*,#141906,.T.); +#141906 = EDGE_CURVE('',#141898,#141907,#141909,.T.); +#141907 = VERTEX_POINT('',#141908); +#141908 = CARTESIAN_POINT('',(95.983315,-115.19032,1.585)); +#141909 = LINE('',#141910,#141911); +#141910 = CARTESIAN_POINT('',(95.93685,-115.234747,1.585)); +#141911 = VECTOR('',#141912,1.); +#141912 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#141913 = ORIENTED_EDGE('',*,*,#141914,.T.); +#141914 = EDGE_CURVE('',#141907,#141915,#141917,.T.); +#141915 = VERTEX_POINT('',#141916); +#141916 = CARTESIAN_POINT('',(96.078016,-115.305713,1.585)); +#141917 = CIRCLE('',#141918,7.499993690112E-02); +#141918 = AXIS2_PLACEMENT_3D('',#141919,#141920,#141921); +#141919 = CARTESIAN_POINT('',(96.024983248309,-115.2526798237,1.585)); +#141920 = DIRECTION('',(0.,0.,-1.)); +#141921 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#141922 = ORIENTED_EDGE('',*,*,#141923,.T.); +#141923 = EDGE_CURVE('',#141915,#141924,#141926,.T.); +#141924 = VERTEX_POINT('',#141925); +#141925 = CARTESIAN_POINT('',(96.014506,-115.365457,1.585)); +#141926 = LINE('',#141927,#141928); +#141927 = CARTESIAN_POINT('',(96.078016,-115.305713,1.585)); +#141928 = VECTOR('',#141929,1.); +#141929 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#141930 = ORIENTED_EDGE('',*,*,#141931,.T.); +#141931 = EDGE_CURVE('',#141924,#141932,#141934,.T.); +#141932 = VERTEX_POINT('',#141933); +#141933 = CARTESIAN_POINT('',(95.554744,-115.362661,1.585)); +#141934 = CIRCLE('',#141935,0.461067828848); +#141935 = AXIS2_PLACEMENT_3D('',#141936,#141937,#141938); +#141936 = CARTESIAN_POINT('',(95.787055512688,-114.9643961335,1.585)); +#141937 = DIRECTION('',(-0.,0.,-1.)); +#141938 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#141939 = ORIENTED_EDGE('',*,*,#141940,.T.); +#141940 = EDGE_CURVE('',#141932,#141941,#141943,.T.); +#141941 = VERTEX_POINT('',#141942); +#141942 = CARTESIAN_POINT('',(95.438055,-115.244898,1.585)); +#141943 = LINE('',#141944,#141945); +#141944 = CARTESIAN_POINT('',(95.554744,-115.362661,1.585)); +#141945 = VECTOR('',#141946,1.); +#141946 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#141947 = ORIENTED_EDGE('',*,*,#141948,.T.); +#141948 = EDGE_CURVE('',#141941,#141949,#141951,.T.); +#141949 = VERTEX_POINT('',#141950); +#141950 = CARTESIAN_POINT('',(95.380794,-115.128013,1.585)); +#141951 = LINE('',#141952,#141953); +#141952 = CARTESIAN_POINT('',(95.438055,-115.244898,1.585)); +#141953 = VECTOR('',#141954,1.); +#141954 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#141955 = ORIENTED_EDGE('',*,*,#141956,.T.); +#141956 = EDGE_CURVE('',#141949,#141957,#141959,.T.); +#141957 = VERTEX_POINT('',#141958); +#141958 = CARTESIAN_POINT('',(95.330936,-114.919347,1.585)); +#141959 = LINE('',#141960,#141961); +#141960 = CARTESIAN_POINT('',(95.380794,-115.128013,1.585)); +#141961 = VECTOR('',#141962,1.); +#141962 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#141963 = ORIENTED_EDGE('',*,*,#141964,.T.); +#141964 = EDGE_CURVE('',#141957,#141965,#141967,.T.); +#141965 = VERTEX_POINT('',#141966); +#141966 = CARTESIAN_POINT('',(95.333175,-114.7583,1.585)); +#141967 = LINE('',#141968,#141969); +#141968 = CARTESIAN_POINT('',(95.330936,-114.919347,1.585)); +#141969 = VECTOR('',#141970,1.); +#141970 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#141971 = ORIENTED_EDGE('',*,*,#141972,.T.); +#141972 = EDGE_CURVE('',#141965,#141973,#141975,.T.); +#141973 = VERTEX_POINT('',#141974); +#141974 = CARTESIAN_POINT('',(95.386473,-114.552473,1.585)); +#141975 = LINE('',#141976,#141977); +#141976 = CARTESIAN_POINT('',(95.333175,-114.7583,1.585)); +#141977 = VECTOR('',#141978,1.); +#141978 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#141979 = ORIENTED_EDGE('',*,*,#141980,.T.); +#141980 = EDGE_CURVE('',#141973,#141981,#141983,.T.); +#141981 = VERTEX_POINT('',#141982); +#141982 = CARTESIAN_POINT('',(95.443422,-114.443492,1.585)); +#141983 = LINE('',#141984,#141985); +#141984 = CARTESIAN_POINT('',(95.386473,-114.552473,1.585)); +#141985 = VECTOR('',#141986,1.); +#141986 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#141987 = ORIENTED_EDGE('',*,*,#141988,.T.); +#141988 = EDGE_CURVE('',#141981,#141812,#141989,.T.); +#141989 = LINE('',#141990,#141991); +#141990 = CARTESIAN_POINT('',(95.443422,-114.443492,1.585)); +#141991 = VECTOR('',#141992,1.); +#141992 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#141993 = PLANE('',#141994); +#141994 = AXIS2_PLACEMENT_3D('',#141995,#141996,#141997); +#141995 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141996 = DIRECTION('',(0.,0.,1.)); +#141997 = DIRECTION('',(1.,0.,-0.)); +#141998 = SHELL_BASED_SURFACE_MODEL('',(#141999)); +#141999 = OPEN_SHELL('',(#142000)); +#142000 = ADVANCED_FACE('',(#142001),#142062,.T.); +#142001 = FACE_BOUND('',#142002,.F.); +#142002 = EDGE_LOOP('',(#142003,#142014,#142022,#142031,#142039,#142048, + #142056)); +#142003 = ORIENTED_EDGE('',*,*,#142004,.T.); +#142004 = EDGE_CURVE('',#142005,#142007,#142009,.T.); +#142005 = VERTEX_POINT('',#142006); +#142006 = CARTESIAN_POINT('',(96.343685,-114.421478,1.585)); +#142007 = VERTEX_POINT('',#142008); +#142008 = CARTESIAN_POINT('',(96.358317,-114.272919,1.585)); +#142009 = CIRCLE('',#142010,7.500006711464E-02); +#142010 = AXIS2_PLACEMENT_3D('',#142011,#142012,#142013); +#142011 = CARTESIAN_POINT('',(96.358316932885,-114.3479190671,1.585)); +#142012 = DIRECTION('',(0.,0.,-1.)); +#142013 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#142014 = ORIENTED_EDGE('',*,*,#142015,.T.); +#142015 = EDGE_CURVE('',#142007,#142016,#142018,.T.); +#142016 = VERTEX_POINT('',#142017); +#142017 = CARTESIAN_POINT('',(97.039615,-114.27436,1.585)); +#142018 = LINE('',#142019,#142020); +#142019 = CARTESIAN_POINT('',(96.358317,-114.272919,1.585)); +#142020 = VECTOR('',#142021,1.); +#142021 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#142022 = ORIENTED_EDGE('',*,*,#142023,.T.); +#142023 = EDGE_CURVE('',#142016,#142024,#142026,.T.); +#142024 = VERTEX_POINT('',#142025); +#142025 = CARTESIAN_POINT('',(97.093919,-114.377463,1.585)); +#142026 = CIRCLE('',#142027,7.500015546835E-02); +#142027 = AXIS2_PLACEMENT_3D('',#142028,#142029,#142030); +#142028 = CARTESIAN_POINT('',(97.024982974224,-114.3479190044,1.585)); +#142029 = DIRECTION('',(0.,0.,-1.)); +#142030 = DIRECTION('',(0.195093272598,0.980784693491,0.)); +#142031 = ORIENTED_EDGE('',*,*,#142032,.T.); +#142032 = EDGE_CURVE('',#142024,#142033,#142035,.T.); +#142033 = VERTEX_POINT('',#142034); +#142034 = CARTESIAN_POINT('',(96.65826,-115.390344,1.585)); +#142035 = LINE('',#142036,#142037); +#142036 = CARTESIAN_POINT('',(97.093919,-114.377463,1.585)); +#142037 = VECTOR('',#142038,1.); +#142038 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#142039 = ORIENTED_EDGE('',*,*,#142040,.T.); +#142040 = EDGE_CURVE('',#142033,#142041,#142043,.T.); +#142041 = VERTEX_POINT('',#142042); +#142042 = CARTESIAN_POINT('',(96.527476,-115.318375,1.585)); +#142043 = CIRCLE('',#142044,7.500030178421E-02); +#142044 = AXIS2_PLACEMENT_3D('',#142045,#142046,#142047); +#142045 = CARTESIAN_POINT('',(96.596412346983,-115.3479186174,1.585)); +#142046 = DIRECTION('',(-0.,0.,-1.)); +#142047 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#142048 = ORIENTED_EDGE('',*,*,#142049,.T.); +#142049 = EDGE_CURVE('',#142041,#142050,#142052,.T.); +#142050 = VERTEX_POINT('',#142051); +#142051 = CARTESIAN_POINT('',(96.911242,-114.422919,1.585)); +#142052 = LINE('',#142053,#142054); +#142053 = CARTESIAN_POINT('',(96.527476,-115.318375,1.585)); +#142054 = VECTOR('',#142055,1.); +#142055 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#142056 = ORIENTED_EDGE('',*,*,#142057,.T.); +#142057 = EDGE_CURVE('',#142050,#142005,#142058,.T.); +#142058 = LINE('',#142059,#142060); +#142059 = CARTESIAN_POINT('',(96.911242,-114.422919,1.585)); +#142060 = VECTOR('',#142061,1.); +#142061 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#142062 = PLANE('',#142063); +#142063 = AXIS2_PLACEMENT_3D('',#142064,#142065,#142066); +#142064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142065 = DIRECTION('',(0.,0.,1.)); +#142066 = DIRECTION('',(1.,0.,-0.)); +#142067 = SHELL_BASED_SURFACE_MODEL('',(#142068)); +#142068 = OPEN_SHELL('',(#142069)); +#142069 = ADVANCED_FACE('',(#142070),#142265,.T.); +#142070 = FACE_BOUND('',#142071,.F.); +#142071 = EDGE_LOOP('',(#142072,#142083,#142091,#142100,#142108,#142116, + #142124,#142132,#142141,#142149,#142158,#142166,#142174,#142182, + #142191,#142199,#142208,#142216,#142225,#142233,#142242,#142250, + #142259)); +#142072 = ORIENTED_EDGE('',*,*,#142073,.T.); +#142073 = EDGE_CURVE('',#142074,#142076,#142078,.T.); +#142074 = VERTEX_POINT('',#142075); +#142075 = CARTESIAN_POINT('',(92.381817,-114.32604,1.585)); +#142076 = VERTEX_POINT('',#142077); +#142077 = CARTESIAN_POINT('',(92.453555,-114.272919,1.585)); +#142078 = CIRCLE('',#142079,7.500336100769E-02); +#142079 = AXIS2_PLACEMENT_3D('',#142080,#142081,#142082); +#142080 = CARTESIAN_POINT('',(92.453557270704,-114.3479223609,1.585)); +#142081 = DIRECTION('',(0.,0.,-1.)); +#142082 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#142083 = ORIENTED_EDGE('',*,*,#142084,.T.); +#142084 = EDGE_CURVE('',#142076,#142085,#142087,.T.); +#142085 = VERTEX_POINT('',#142086); +#142086 = CARTESIAN_POINT('',(92.944377,-114.27436,1.585)); +#142087 = LINE('',#142088,#142089); +#142088 = CARTESIAN_POINT('',(92.453555,-114.272919,1.585)); +#142089 = VECTOR('',#142090,1.); +#142090 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#142091 = ORIENTED_EDGE('',*,*,#142092,.T.); +#142092 = EDGE_CURVE('',#142085,#142093,#142095,.T.); +#142093 = VERTEX_POINT('',#142094); +#142094 = CARTESIAN_POINT('',(92.929745,-114.422919,1.585)); +#142095 = CIRCLE('',#142096,7.500006711464E-02); +#142096 = AXIS2_PLACEMENT_3D('',#142097,#142098,#142099); +#142097 = CARTESIAN_POINT('',(92.929745067115,-114.3479189328,1.585)); +#142098 = DIRECTION('',(0.,0.,-1.)); +#142099 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#142100 = ORIENTED_EDGE('',*,*,#142101,.T.); +#142101 = EDGE_CURVE('',#142093,#142102,#142104,.T.); +#142102 = VERTEX_POINT('',#142103); +#142103 = CARTESIAN_POINT('',(92.521429,-114.422919,1.585)); +#142104 = LINE('',#142105,#142106); +#142105 = CARTESIAN_POINT('',(92.929745,-114.422919,1.585)); +#142106 = VECTOR('',#142107,1.); +#142107 = DIRECTION('',(-1.,0.,0.)); +#142108 = ORIENTED_EDGE('',*,*,#142109,.T.); +#142109 = EDGE_CURVE('',#142102,#142110,#142112,.T.); +#142110 = VERTEX_POINT('',#142111); +#142111 = CARTESIAN_POINT('',(92.49661,-114.671109,1.585)); +#142112 = LINE('',#142113,#142114); +#142113 = CARTESIAN_POINT('',(92.521429,-114.422919,1.585)); +#142114 = VECTOR('',#142115,1.); +#142115 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#142116 = ORIENTED_EDGE('',*,*,#142117,.T.); +#142117 = EDGE_CURVE('',#142110,#142118,#142120,.T.); +#142118 = VERTEX_POINT('',#142119); +#142119 = CARTESIAN_POINT('',(92.534161,-114.655312,1.585)); +#142120 = LINE('',#142121,#142122); +#142121 = CARTESIAN_POINT('',(92.49661,-114.671109,1.585)); +#142122 = VECTOR('',#142123,1.); +#142123 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#142124 = ORIENTED_EDGE('',*,*,#142125,.T.); +#142125 = EDGE_CURVE('',#142118,#142126,#142128,.T.); +#142126 = VERTEX_POINT('',#142127); +#142127 = CARTESIAN_POINT('',(92.806697,-114.656534,1.585)); +#142128 = LINE('',#142129,#142130); +#142129 = CARTESIAN_POINT('',(92.534161,-114.655312,1.585)); +#142130 = VECTOR('',#142131,1.); +#142131 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#142132 = ORIENTED_EDGE('',*,*,#142133,.T.); +#142133 = EDGE_CURVE('',#142126,#142134,#142136,.T.); +#142134 = VERTEX_POINT('',#142135); +#142135 = CARTESIAN_POINT('',(93.050923,-114.904715,1.585)); +#142136 = CIRCLE('',#142137,0.348625649748); +#142137 = AXIS2_PLACEMENT_3D('',#142138,#142139,#142140); +#142138 = CARTESIAN_POINT('',(92.713525045865,-114.9924786838,1.585)); +#142139 = DIRECTION('',(0.,0.,-1.)); +#142140 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#142141 = ORIENTED_EDGE('',*,*,#142142,.T.); +#142142 = EDGE_CURVE('',#142134,#142143,#142145,.T.); +#142143 = VERTEX_POINT('',#142144); +#142144 = CARTESIAN_POINT('',(93.049701,-115.177252,1.585)); +#142145 = LINE('',#142146,#142147); +#142146 = CARTESIAN_POINT('',(93.050923,-114.904715,1.585)); +#142147 = VECTOR('',#142148,1.); +#142148 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#142149 = ORIENTED_EDGE('',*,*,#142150,.T.); +#142150 = EDGE_CURVE('',#142143,#142151,#142153,.T.); +#142151 = VERTEX_POINT('',#142152); +#142152 = CARTESIAN_POINT('',(92.80152,-115.421478,1.585)); +#142153 = CIRCLE('',#142154,0.348635327447); +#142154 = AXIS2_PLACEMENT_3D('',#142155,#142156,#142157); +#142155 = CARTESIAN_POINT('',(92.713748481291,-115.0840720841,1.585)); +#142156 = DIRECTION('',(0.,0.,-1.)); +#142157 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#142158 = ORIENTED_EDGE('',*,*,#142159,.T.); +#142159 = EDGE_CURVE('',#142151,#142160,#142162,.T.); +#142160 = VERTEX_POINT('',#142161); +#142161 = CARTESIAN_POINT('',(92.528983,-115.420256,1.585)); +#142162 = LINE('',#142163,#142164); +#142163 = CARTESIAN_POINT('',(92.80152,-115.421478,1.585)); +#142164 = VECTOR('',#142165,1.); +#142165 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#142166 = ORIENTED_EDGE('',*,*,#142167,.T.); +#142167 = EDGE_CURVE('',#142160,#142168,#142170,.T.); +#142168 = VERTEX_POINT('',#142169); +#142169 = CARTESIAN_POINT('',(92.40627,-115.35805,1.585)); +#142170 = LINE('',#142171,#142172); +#142171 = CARTESIAN_POINT('',(92.528983,-115.420256,1.585)); +#142172 = VECTOR('',#142173,1.); +#142173 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#142174 = ORIENTED_EDGE('',*,*,#142175,.T.); +#142175 = EDGE_CURVE('',#142168,#142176,#142178,.T.); +#142176 = VERTEX_POINT('',#142177); +#142177 = CARTESIAN_POINT('',(92.343575,-115.294347,1.585)); +#142178 = LINE('',#142179,#142180); +#142179 = CARTESIAN_POINT('',(92.40627,-115.35805,1.585)); +#142180 = VECTOR('',#142181,1.); +#142181 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#142182 = ORIENTED_EDGE('',*,*,#142183,.T.); +#142183 = EDGE_CURVE('',#142176,#142184,#142186,.T.); +#142184 = VERTEX_POINT('',#142185); +#142185 = CARTESIAN_POINT('',(92.45897,-115.199648,1.585)); +#142186 = CIRCLE('',#142187,7.50001266804E-02); +#142187 = AXIS2_PLACEMENT_3D('',#142188,#142189,#142190); +#142188 = CARTESIAN_POINT('',(92.405936051994,-115.2526802483,1.585)); +#142189 = DIRECTION('',(0.,0.,-1.)); +#142190 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#142191 = ORIENTED_EDGE('',*,*,#142192,.T.); +#142192 = EDGE_CURVE('',#142184,#142193,#142195,.T.); +#142193 = VERTEX_POINT('',#142194); +#142194 = CARTESIAN_POINT('',(92.497982,-115.238661,1.585)); +#142195 = LINE('',#142196,#142197); +#142196 = CARTESIAN_POINT('',(92.45897,-115.199648,1.585)); +#142197 = VECTOR('',#142198,1.); +#142198 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#142199 = ORIENTED_EDGE('',*,*,#142200,.T.); +#142200 = EDGE_CURVE('',#142193,#142201,#142203,.T.); +#142201 = VERTEX_POINT('',#142202); +#142202 = CARTESIAN_POINT('',(92.837698,-115.238661,1.585)); +#142203 = CIRCLE('',#142204,0.305620374329); +#142204 = AXIS2_PLACEMENT_3D('',#142205,#142206,#142207); +#142205 = CARTESIAN_POINT('',(92.66784,-114.98459,1.585)); +#142206 = DIRECTION('',(0.,0.,1.)); +#142207 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#142208 = ORIENTED_EDGE('',*,*,#142209,.T.); +#142209 = EDGE_CURVE('',#142201,#142210,#142212,.T.); +#142210 = VERTEX_POINT('',#142211); +#142211 = CARTESIAN_POINT('',(92.868105,-115.208253,1.585)); +#142212 = LINE('',#142213,#142214); +#142213 = CARTESIAN_POINT('',(92.837698,-115.238661,1.585)); +#142214 = VECTOR('',#142215,1.); +#142215 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#142216 = ORIENTED_EDGE('',*,*,#142217,.T.); +#142217 = EDGE_CURVE('',#142210,#142218,#142220,.T.); +#142218 = VERTEX_POINT('',#142219); +#142219 = CARTESIAN_POINT('',(92.868106,-114.868536,1.585)); +#142220 = CIRCLE('',#142221,0.305616146029); +#142221 = AXIS2_PLACEMENT_3D('',#142222,#142223,#142224); +#142222 = CARTESIAN_POINT('',(92.614039920493,-115.0383937521,1.585)); +#142223 = DIRECTION('',(0.,-0.,1.)); +#142224 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#142225 = ORIENTED_EDGE('',*,*,#142226,.T.); +#142226 = EDGE_CURVE('',#142218,#142227,#142229,.T.); +#142227 = VERTEX_POINT('',#142228); +#142228 = CARTESIAN_POINT('',(92.837699,-114.838129,1.585)); +#142229 = LINE('',#142230,#142231); +#142230 = CARTESIAN_POINT('',(92.868106,-114.868536,1.585)); +#142231 = VECTOR('',#142232,1.); +#142232 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#142233 = ORIENTED_EDGE('',*,*,#142234,.T.); +#142234 = EDGE_CURVE('',#142227,#142235,#142237,.T.); +#142235 = VERTEX_POINT('',#142236); +#142236 = CARTESIAN_POINT('',(92.497982,-114.838129,1.585)); +#142237 = CIRCLE('',#142238,0.305621483548); +#142238 = AXIS2_PLACEMENT_3D('',#142239,#142240,#142241); +#142239 = CARTESIAN_POINT('',(92.6678405,-115.092201,1.585)); +#142240 = DIRECTION('',(0.,0.,1.)); +#142241 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#142242 = ORIENTED_EDGE('',*,*,#142243,.T.); +#142243 = EDGE_CURVE('',#142235,#142244,#142246,.T.); +#142244 = VERTEX_POINT('',#142245); +#142245 = CARTESIAN_POINT('',(92.441192,-114.890306,1.585)); +#142246 = LINE('',#142247,#142248); +#142247 = CARTESIAN_POINT('',(92.497982,-114.838129,1.585)); +#142248 = VECTOR('',#142249,1.); +#142249 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#142250 = ORIENTED_EDGE('',*,*,#142251,.T.); +#142251 = EDGE_CURVE('',#142244,#142252,#142254,.T.); +#142252 = VERTEX_POINT('',#142253); +#142253 = CARTESIAN_POINT('',(92.331286,-114.831349,1.585)); +#142254 = CIRCLE('',#142255,7.500024172469E-02); +#142255 = AXIS2_PLACEMENT_3D('',#142256,#142257,#142258); +#142256 = CARTESIAN_POINT('',(92.405935970023,-114.8241089561,1.585)); +#142257 = DIRECTION('',(-0.,0.,-1.)); +#142258 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#142259 = ORIENTED_EDGE('',*,*,#142260,.T.); +#142260 = EDGE_CURVE('',#142252,#142074,#142261,.T.); +#142261 = LINE('',#142262,#142263); +#142262 = CARTESIAN_POINT('',(92.331286,-114.831349,1.585)); +#142263 = VECTOR('',#142264,1.); +#142264 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#142265 = PLANE('',#142266); +#142266 = AXIS2_PLACEMENT_3D('',#142267,#142268,#142269); +#142267 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142268 = DIRECTION('',(0.,0.,1.)); +#142269 = DIRECTION('',(1.,0.,-0.)); +#142270 = SHELL_BASED_SURFACE_MODEL('',(#142271)); +#142271 = OPEN_SHELL('',(#142272)); +#142272 = ADVANCED_FACE('',(#142273),#142417,.T.); +#142273 = FACE_BOUND('',#142274,.F.); +#142274 = EDGE_LOOP('',(#142275,#142286,#142294,#142303,#142311,#142319, + #142328,#142336,#142345,#142353,#142361,#142370,#142378,#142386, + #142395,#142403,#142411)); +#142275 = ORIENTED_EDGE('',*,*,#142276,.T.); +#142276 = EDGE_CURVE('',#142277,#142279,#142281,.T.); +#142277 = VERTEX_POINT('',#142278); +#142278 = CARTESIAN_POINT('',(177.961333,-114.665753,1.585)); +#142279 = VERTEX_POINT('',#142280); +#142280 = CARTESIAN_POINT('',(178.42811,-114.669621,1.585)); +#142281 = CIRCLE('',#142282,0.399448428941); +#142282 = AXIS2_PLACEMENT_3D('',#142283,#142284,#142285); +#142283 = CARTESIAN_POINT('',(178.19203533486,-114.9918442143,1.585)); +#142284 = DIRECTION('',(0.,0.,-1.)); +#142285 = DIRECTION('',(-0.577552239904,0.816353728589,0.)); +#142286 = ORIENTED_EDGE('',*,*,#142287,.T.); +#142287 = EDGE_CURVE('',#142279,#142288,#142290,.T.); +#142288 = VERTEX_POINT('',#142289); +#142289 = CARTESIAN_POINT('',(178.447283,-114.691729,1.585)); +#142290 = LINE('',#142291,#142292); +#142291 = CARTESIAN_POINT('',(178.42811,-114.669621,1.585)); +#142292 = VECTOR('',#142293,1.); +#142293 = DIRECTION('',(0.655178986934,-0.755473689205,0.)); +#142294 = ORIENTED_EDGE('',*,*,#142295,.T.); +#142295 = EDGE_CURVE('',#142288,#142296,#142298,.T.); +#142296 = VERTEX_POINT('',#142297); +#142297 = CARTESIAN_POINT('',(178.348585,-114.795953,1.585)); +#142298 = CIRCLE('',#142299,7.499986582492E-02); +#142299 = AXIS2_PLACEMENT_3D('',#142300,#142301,#142302); +#142300 = CARTESIAN_POINT('',(178.3821258973,-114.7288710495,1.585)); +#142301 = DIRECTION('',(0.,0.,-1.)); +#142302 = DIRECTION('',(0.868762923549,0.495228212713,0.)); +#142303 = ORIENTED_EDGE('',*,*,#142304,.T.); +#142304 = EDGE_CURVE('',#142296,#142305,#142307,.T.); +#142305 = VERTEX_POINT('',#142306); +#142306 = CARTESIAN_POINT('',(178.269183,-114.756252,1.585)); +#142307 = LINE('',#142308,#142309); +#142308 = CARTESIAN_POINT('',(178.348585,-114.795953,1.585)); +#142309 = VECTOR('',#142310,1.); +#142310 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#142311 = ORIENTED_EDGE('',*,*,#142312,.T.); +#142312 = EDGE_CURVE('',#142305,#142313,#142315,.T.); +#142313 = VERTEX_POINT('',#142314); +#142314 = CARTESIAN_POINT('',(178.114117,-114.756252,1.585)); +#142315 = LINE('',#142316,#142317); +#142316 = CARTESIAN_POINT('',(178.269183,-114.756252,1.585)); +#142317 = VECTOR('',#142318,1.); +#142318 = DIRECTION('',(-1.,0.,0.)); +#142319 = ORIENTED_EDGE('',*,*,#142320,.T.); +#142320 = EDGE_CURVE('',#142313,#142321,#142323,.T.); +#142321 = VERTEX_POINT('',#142322); +#142322 = CARTESIAN_POINT('',(177.980936,-114.889433,1.585)); +#142323 = CIRCLE('',#142324,0.18686440374); +#142324 = AXIS2_PLACEMENT_3D('',#142325,#142326,#142327); +#142325 = CARTESIAN_POINT('',(178.161653,-114.936969,1.585)); +#142326 = DIRECTION('',(0.,0.,1.)); +#142327 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#142328 = ORIENTED_EDGE('',*,*,#142329,.T.); +#142329 = EDGE_CURVE('',#142321,#142330,#142332,.T.); +#142330 = VERTEX_POINT('',#142331); +#142331 = CARTESIAN_POINT('',(177.980936,-115.139737,1.585)); +#142332 = LINE('',#142333,#142334); +#142333 = CARTESIAN_POINT('',(177.980936,-114.889433,1.585)); +#142334 = VECTOR('',#142335,1.); +#142335 = DIRECTION('',(0.,-1.,0.)); +#142336 = ORIENTED_EDGE('',*,*,#142337,.T.); +#142337 = EDGE_CURVE('',#142330,#142338,#142340,.T.); +#142338 = VERTEX_POINT('',#142339); +#142339 = CARTESIAN_POINT('',(178.114117,-115.272919,1.585)); +#142340 = CIRCLE('',#142341,0.186867373533); +#142341 = AXIS2_PLACEMENT_3D('',#142342,#142343,#142344); +#142342 = CARTESIAN_POINT('',(178.16165571388,-115.092199643,1.585)); +#142343 = DIRECTION('',(0.,0.,1.)); +#142344 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#142345 = ORIENTED_EDGE('',*,*,#142346,.T.); +#142346 = EDGE_CURVE('',#142338,#142347,#142349,.T.); +#142347 = VERTEX_POINT('',#142348); +#142348 = CARTESIAN_POINT('',(178.269183,-115.272919,1.585)); +#142349 = LINE('',#142350,#142351); +#142350 = CARTESIAN_POINT('',(178.114117,-115.272919,1.585)); +#142351 = VECTOR('',#142352,1.); +#142352 = DIRECTION('',(1.,0.,0.)); +#142353 = ORIENTED_EDGE('',*,*,#142354,.T.); +#142354 = EDGE_CURVE('',#142347,#142355,#142357,.T.); +#142355 = VERTEX_POINT('',#142356); +#142356 = CARTESIAN_POINT('',(178.362316,-115.227963,1.585)); +#142357 = LINE('',#142358,#142359); +#142358 = CARTESIAN_POINT('',(178.269183,-115.272919,1.585)); +#142359 = VECTOR('',#142360,1.); +#142360 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#142361 = ORIENTED_EDGE('',*,*,#142362,.T.); +#142362 = EDGE_CURVE('',#142355,#142363,#142365,.T.); +#142363 = VERTEX_POINT('',#142364); +#142364 = CARTESIAN_POINT('',(178.415667,-115.367382,1.585)); +#142365 = CIRCLE('',#142366,7.50002944047E-02); +#142366 = AXIS2_PLACEMENT_3D('',#142367,#142368,#142369); +#142367 = CARTESIAN_POINT('',(178.38212535132,-115.300299946,1.585)); +#142368 = DIRECTION('',(0.,0.,-1.)); +#142369 = DIRECTION('',(-0.264123647521,0.964488827732,-0.)); +#142370 = ORIENTED_EDGE('',*,*,#142371,.T.); +#142371 = EDGE_CURVE('',#142363,#142372,#142374,.T.); +#142372 = VERTEX_POINT('',#142373); +#142373 = CARTESIAN_POINT('',(178.30152,-115.421478,1.585)); +#142374 = LINE('',#142375,#142376); +#142375 = CARTESIAN_POINT('',(178.415667,-115.367382,1.585)); +#142376 = VECTOR('',#142377,1.); +#142377 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#142378 = ORIENTED_EDGE('',*,*,#142379,.T.); +#142379 = EDGE_CURVE('',#142372,#142380,#142382,.T.); +#142380 = VERTEX_POINT('',#142381); +#142381 = CARTESIAN_POINT('',(178.076602,-115.420256,1.585)); +#142382 = LINE('',#142383,#142384); +#142383 = CARTESIAN_POINT('',(178.30152,-115.421478,1.585)); +#142384 = VECTOR('',#142385,1.); +#142385 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#142386 = ORIENTED_EDGE('',*,*,#142387,.T.); +#142387 = EDGE_CURVE('',#142380,#142388,#142390,.T.); +#142388 = VERTEX_POINT('',#142389); +#142389 = CARTESIAN_POINT('',(177.832377,-115.172074,1.585)); +#142390 = CIRCLE('',#142391,0.348628446661); +#142391 = AXIS2_PLACEMENT_3D('',#142392,#142393,#142394); +#142392 = CARTESIAN_POINT('',(178.16977761322,-115.0843094284,1.585)); +#142393 = DIRECTION('',(0.,0.,-1.)); +#142394 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#142395 = ORIENTED_EDGE('',*,*,#142396,.T.); +#142396 = EDGE_CURVE('',#142388,#142397,#142399,.T.); +#142397 = VERTEX_POINT('',#142398); +#142398 = CARTESIAN_POINT('',(177.833599,-114.851919,1.585)); +#142399 = LINE('',#142400,#142401); +#142400 = CARTESIAN_POINT('',(177.832377,-115.172074,1.585)); +#142401 = VECTOR('',#142402,1.); +#142402 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#142403 = ORIENTED_EDGE('',*,*,#142404,.T.); +#142404 = EDGE_CURVE('',#142397,#142405,#142407,.T.); +#142405 = VERTEX_POINT('',#142406); +#142406 = CARTESIAN_POINT('',(177.895803,-114.729206,1.585)); +#142407 = LINE('',#142408,#142409); +#142408 = CARTESIAN_POINT('',(177.833599,-114.851919,1.585)); +#142409 = VECTOR('',#142410,1.); +#142410 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#142411 = ORIENTED_EDGE('',*,*,#142412,.T.); +#142412 = EDGE_CURVE('',#142405,#142277,#142413,.T.); +#142413 = LINE('',#142414,#142415); +#142414 = CARTESIAN_POINT('',(177.895803,-114.729206,1.585)); +#142415 = VECTOR('',#142416,1.); +#142416 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#142417 = PLANE('',#142418); +#142418 = AXIS2_PLACEMENT_3D('',#142419,#142420,#142421); +#142419 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142420 = DIRECTION('',(0.,0.,1.)); +#142421 = DIRECTION('',(1.,0.,-0.)); +#142422 = SHELL_BASED_SURFACE_MODEL('',(#142423)); +#142423 = OPEN_SHELL('',(#142424)); +#142424 = ADVANCED_FACE('',(#142425,#142502),#142579,.T.); +#142425 = FACE_BOUND('',#142426,.F.); +#142426 = EDGE_LOOP('',(#142427,#142438,#142446,#142454,#142463,#142471, + #142480,#142488,#142496)); +#142427 = ORIENTED_EDGE('',*,*,#142428,.T.); +#142428 = EDGE_CURVE('',#142429,#142431,#142433,.T.); +#142429 = VERTEX_POINT('',#142430); +#142430 = CARTESIAN_POINT('',(178.818476,-114.665753,1.585)); +#142431 = VERTEX_POINT('',#142432); +#142432 = CARTESIAN_POINT('',(179.302386,-114.736649,1.585)); +#142433 = CIRCLE('',#142434,0.34461174713); +#142434 = AXIS2_PLACEMENT_3D('',#142435,#142436,#142437); +#142435 = CARTESIAN_POINT('',(179.02523294377,-114.9414499757,1.585)); +#142436 = DIRECTION('',(0.,0.,-1.)); +#142437 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#142438 = ORIENTED_EDGE('',*,*,#142439,.T.); +#142439 = EDGE_CURVE('',#142431,#142440,#142442,.T.); +#142440 = VERTEX_POINT('',#142441); +#142441 = CARTESIAN_POINT('',(179.360447,-114.857096,1.585)); +#142442 = LINE('',#142443,#142444); +#142443 = CARTESIAN_POINT('',(179.302386,-114.736649,1.585)); +#142444 = VECTOR('',#142445,1.); +#142445 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#142446 = ORIENTED_EDGE('',*,*,#142447,.T.); +#142447 = EDGE_CURVE('',#142440,#142448,#142450,.T.); +#142448 = VERTEX_POINT('',#142449); +#142449 = CARTESIAN_POINT('',(179.359225,-115.177252,1.585)); +#142450 = LINE('',#142451,#142452); +#142451 = CARTESIAN_POINT('',(179.360447,-114.857096,1.585)); +#142452 = VECTOR('',#142453,1.); +#142453 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#142454 = ORIENTED_EDGE('',*,*,#142455,.T.); +#142455 = EDGE_CURVE('',#142448,#142456,#142458,.T.); +#142456 = VERTEX_POINT('',#142457); +#142457 = CARTESIAN_POINT('',(179.111044,-115.421478,1.585)); +#142458 = CIRCLE('',#142459,0.348635327447); +#142459 = AXIS2_PLACEMENT_3D('',#142460,#142461,#142462); +#142460 = CARTESIAN_POINT('',(179.02327248129,-115.0840720841,1.585)); +#142461 = DIRECTION('',(0.,0.,-1.)); +#142462 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#142463 = ORIENTED_EDGE('',*,*,#142464,.T.); +#142464 = EDGE_CURVE('',#142456,#142465,#142467,.T.); +#142465 = VERTEX_POINT('',#142466); +#142466 = CARTESIAN_POINT('',(178.933745,-115.420256,1.585)); +#142467 = LINE('',#142468,#142469); +#142468 = CARTESIAN_POINT('',(179.111044,-115.421478,1.585)); +#142469 = VECTOR('',#142470,1.); +#142470 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#142471 = ORIENTED_EDGE('',*,*,#142472,.T.); +#142472 = EDGE_CURVE('',#142465,#142473,#142475,.T.); +#142473 = VERTEX_POINT('',#142474); +#142474 = CARTESIAN_POINT('',(178.68952,-115.172074,1.585)); +#142475 = CIRCLE('',#142476,0.348628446662); +#142476 = AXIS2_PLACEMENT_3D('',#142477,#142478,#142479); +#142477 = CARTESIAN_POINT('',(179.02692061322,-115.0843094284,1.585)); +#142478 = DIRECTION('',(0.,0.,-1.)); +#142479 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#142480 = ORIENTED_EDGE('',*,*,#142481,.T.); +#142481 = EDGE_CURVE('',#142473,#142482,#142484,.T.); +#142482 = VERTEX_POINT('',#142483); +#142483 = CARTESIAN_POINT('',(178.690742,-114.851919,1.585)); +#142484 = LINE('',#142485,#142486); +#142485 = CARTESIAN_POINT('',(178.68952,-115.172074,1.585)); +#142486 = VECTOR('',#142487,1.); +#142487 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#142488 = ORIENTED_EDGE('',*,*,#142489,.T.); +#142489 = EDGE_CURVE('',#142482,#142490,#142492,.T.); +#142490 = VERTEX_POINT('',#142491); +#142491 = CARTESIAN_POINT('',(178.752946,-114.729206,1.585)); +#142492 = LINE('',#142493,#142494); +#142493 = CARTESIAN_POINT('',(178.690742,-114.851919,1.585)); +#142494 = VECTOR('',#142495,1.); +#142495 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#142496 = ORIENTED_EDGE('',*,*,#142497,.T.); +#142497 = EDGE_CURVE('',#142490,#142429,#142498,.T.); +#142498 = LINE('',#142499,#142500); +#142499 = CARTESIAN_POINT('',(178.752946,-114.729206,1.585)); +#142500 = VECTOR('',#142501,1.); +#142501 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#142502 = FACE_BOUND('',#142503,.F.); +#142503 = EDGE_LOOP('',(#142504,#142515,#142523,#142531,#142540,#142548, + #142557,#142565,#142573)); +#142504 = ORIENTED_EDGE('',*,*,#142505,.T.); +#142505 = EDGE_CURVE('',#142506,#142508,#142510,.T.); +#142506 = VERTEX_POINT('',#142507); +#142507 = CARTESIAN_POINT('',(179.147223,-114.79051,1.585)); +#142508 = VERTEX_POINT('',#142509); +#142509 = CARTESIAN_POINT('',(178.872337,-114.820917,1.585)); +#142510 = CIRCLE('',#142511,0.198386215365); +#142511 = AXIS2_PLACEMENT_3D('',#142512,#142513,#142514); +#142512 = CARTESIAN_POINT('',(179.02541995783,-114.9471021753,1.585)); +#142513 = DIRECTION('',(0.,0.,1.)); +#142514 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#142515 = ORIENTED_EDGE('',*,*,#142516,.T.); +#142516 = EDGE_CURVE('',#142508,#142517,#142519,.T.); +#142517 = VERTEX_POINT('',#142518); +#142518 = CARTESIAN_POINT('',(178.838079,-114.889433,1.585)); +#142519 = LINE('',#142520,#142521); +#142520 = CARTESIAN_POINT('',(178.872337,-114.820917,1.585)); +#142521 = VECTOR('',#142522,1.); +#142522 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#142523 = ORIENTED_EDGE('',*,*,#142524,.T.); +#142524 = EDGE_CURVE('',#142517,#142525,#142527,.T.); +#142525 = VERTEX_POINT('',#142526); +#142526 = CARTESIAN_POINT('',(178.838079,-115.139737,1.585)); +#142527 = LINE('',#142528,#142529); +#142528 = CARTESIAN_POINT('',(178.838079,-114.889433,1.585)); +#142529 = VECTOR('',#142530,1.); +#142530 = DIRECTION('',(0.,-1.,0.)); +#142531 = ORIENTED_EDGE('',*,*,#142532,.T.); +#142532 = EDGE_CURVE('',#142525,#142533,#142535,.T.); +#142533 = VERTEX_POINT('',#142534); +#142534 = CARTESIAN_POINT('',(178.97126,-115.272919,1.585)); +#142535 = CIRCLE('',#142536,0.186867373533); +#142536 = AXIS2_PLACEMENT_3D('',#142537,#142538,#142539); +#142537 = CARTESIAN_POINT('',(179.01879871388,-115.092199643,1.585)); +#142538 = DIRECTION('',(0.,0.,1.)); +#142539 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#142540 = ORIENTED_EDGE('',*,*,#142541,.T.); +#142541 = EDGE_CURVE('',#142533,#142542,#142544,.T.); +#142542 = VERTEX_POINT('',#142543); +#142543 = CARTESIAN_POINT('',(179.078707,-115.272919,1.585)); +#142544 = LINE('',#142545,#142546); +#142545 = CARTESIAN_POINT('',(178.97126,-115.272919,1.585)); +#142546 = VECTOR('',#142547,1.); +#142547 = DIRECTION('',(1.,0.,0.)); +#142548 = ORIENTED_EDGE('',*,*,#142549,.T.); +#142549 = EDGE_CURVE('',#142542,#142550,#142552,.T.); +#142550 = VERTEX_POINT('',#142551); +#142551 = CARTESIAN_POINT('',(179.211888,-115.139737,1.585)); +#142552 = CIRCLE('',#142553,0.186867760544); +#142553 = AXIS2_PLACEMENT_3D('',#142554,#142555,#142556); +#142554 = CARTESIAN_POINT('',(179.03116796928,-115.0921993262,1.585)); +#142555 = DIRECTION('',(0.,0.,1.)); +#142556 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#142557 = ORIENTED_EDGE('',*,*,#142558,.T.); +#142558 = EDGE_CURVE('',#142550,#142559,#142561,.T.); +#142559 = VERTEX_POINT('',#142560); +#142560 = CARTESIAN_POINT('',(179.211888,-114.889433,1.585)); +#142561 = LINE('',#142562,#142563); +#142562 = CARTESIAN_POINT('',(179.211888,-115.139737,1.585)); +#142563 = VECTOR('',#142564,1.); +#142564 = DIRECTION('',(0.,1.,0.)); +#142565 = ORIENTED_EDGE('',*,*,#142566,.T.); +#142566 = EDGE_CURVE('',#142559,#142567,#142569,.T.); +#142567 = VERTEX_POINT('',#142568); +#142568 = CARTESIAN_POINT('',(179.17763,-114.820917,1.585)); +#142569 = LINE('',#142570,#142571); +#142570 = CARTESIAN_POINT('',(179.211888,-114.889433,1.585)); +#142571 = VECTOR('',#142572,1.); +#142572 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#142573 = ORIENTED_EDGE('',*,*,#142574,.T.); +#142574 = EDGE_CURVE('',#142567,#142506,#142575,.T.); +#142575 = LINE('',#142576,#142577); +#142576 = CARTESIAN_POINT('',(179.17763,-114.820917,1.585)); +#142577 = VECTOR('',#142578,1.); +#142578 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#142579 = PLANE('',#142580); +#142580 = AXIS2_PLACEMENT_3D('',#142581,#142582,#142583); +#142581 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142582 = DIRECTION('',(0.,0.,1.)); +#142583 = DIRECTION('',(1.,0.,-0.)); +#142584 = SHELL_BASED_SURFACE_MODEL('',(#142585)); +#142585 = OPEN_SHELL('',(#142586)); +#142586 = ADVANCED_FACE('',(#142587),#142804,.T.); +#142587 = FACE_BOUND('',#142588,.F.); +#142588 = EDGE_LOOP('',(#142589,#142600,#142608,#142616,#142624,#142633, + #142641,#142650,#142658,#142667,#142675,#142683,#142692,#142700, + #142708,#142717,#142725,#142733,#142741,#142749,#142757,#142765, + #142773,#142782,#142790,#142798)); +#142589 = ORIENTED_EDGE('',*,*,#142590,.T.); +#142590 = EDGE_CURVE('',#142591,#142593,#142595,.T.); +#142591 = VERTEX_POINT('',#142592); +#142592 = CARTESIAN_POINT('',(179.673792,-114.618892,1.585)); +#142593 = VERTEX_POINT('',#142594); +#142594 = CARTESIAN_POINT('',(179.776529,-114.638293,1.585)); +#142595 = CIRCLE('',#142596,7.440760172328E-02); +#142596 = AXIS2_PLACEMENT_3D('',#142597,#142598,#142599); +#142597 = CARTESIAN_POINT('',(179.71533506572,-114.680622583,1.585)); +#142598 = DIRECTION('',(0.,0.,-1.)); +#142599 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#142600 = ORIENTED_EDGE('',*,*,#142601,.T.); +#142601 = EDGE_CURVE('',#142593,#142602,#142604,.T.); +#142602 = VERTEX_POINT('',#142603); +#142603 = CARTESIAN_POINT('',(179.843685,-114.607693,1.585)); +#142604 = LINE('',#142605,#142606); +#142605 = CARTESIAN_POINT('',(179.776529,-114.638293,1.585)); +#142606 = VECTOR('',#142607,1.); +#142607 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#142608 = ORIENTED_EDGE('',*,*,#142609,.T.); +#142609 = EDGE_CURVE('',#142602,#142610,#142612,.T.); +#142610 = VERTEX_POINT('',#142611); +#142611 = CARTESIAN_POINT('',(180.015806,-114.607693,1.585)); +#142612 = LINE('',#142613,#142614); +#142613 = CARTESIAN_POINT('',(179.843685,-114.607693,1.585)); +#142614 = VECTOR('',#142615,1.); +#142615 = DIRECTION('',(1.,0.,0.)); +#142616 = ORIENTED_EDGE('',*,*,#142617,.T.); +#142617 = EDGE_CURVE('',#142610,#142618,#142620,.T.); +#142618 = VERTEX_POINT('',#142619); +#142619 = CARTESIAN_POINT('',(180.145666,-114.669621,1.585)); +#142620 = LINE('',#142621,#142622); +#142621 = CARTESIAN_POINT('',(180.015806,-114.607693,1.585)); +#142622 = VECTOR('',#142623,1.); +#142623 = DIRECTION('',(0.902617807283,-0.430442904431,0.)); +#142624 = ORIENTED_EDGE('',*,*,#142625,.T.); +#142625 = EDGE_CURVE('',#142618,#142626,#142628,.T.); +#142626 = VERTEX_POINT('',#142627); +#142627 = CARTESIAN_POINT('',(180.570967,-114.669621,1.585)); +#142628 = CIRCLE('',#142629,0.347106732746); +#142629 = AXIS2_PLACEMENT_3D('',#142630,#142631,#142632); +#142630 = CARTESIAN_POINT('',(180.3583165,-114.943961753,1.585)); +#142631 = DIRECTION('',(0.,0.,-1.)); +#142632 = DIRECTION('',(-0.612637209073,0.790364251506,0.)); +#142633 = ORIENTED_EDGE('',*,*,#142634,.T.); +#142634 = EDGE_CURVE('',#142626,#142635,#142637,.T.); +#142635 = VERTEX_POINT('',#142636); +#142636 = CARTESIAN_POINT('',(180.592066,-114.69533,1.585)); +#142637 = LINE('',#142638,#142639); +#142638 = CARTESIAN_POINT('',(180.570967,-114.669621,1.585)); +#142639 = VECTOR('',#142640,1.); +#142640 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#142641 = ORIENTED_EDGE('',*,*,#142642,.T.); +#142642 = EDGE_CURVE('',#142635,#142643,#142645,.T.); +#142643 = VERTEX_POINT('',#142644); +#142644 = CARTESIAN_POINT('',(180.634963,-115.389587,1.585)); +#142645 = CIRCLE('',#142646,0.780466291444); +#142646 = AXIS2_PLACEMENT_3D('',#142647,#142648,#142649); +#142647 = CARTESIAN_POINT('',(179.9161532213,-115.0855473082,1.585)); +#142648 = DIRECTION('',(0.,0.,-1.)); +#142649 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#142650 = ORIENTED_EDGE('',*,*,#142651,.T.); +#142651 = EDGE_CURVE('',#142643,#142652,#142654,.T.); +#142652 = VERTEX_POINT('',#142653); +#142653 = CARTESIAN_POINT('',(180.614271,-115.410279,1.585)); +#142654 = LINE('',#142655,#142656); +#142655 = CARTESIAN_POINT('',(180.634963,-115.389587,1.585)); +#142656 = VECTOR('',#142657,1.); +#142657 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#142658 = ORIENTED_EDGE('',*,*,#142659,.T.); +#142659 = EDGE_CURVE('',#142652,#142660,#142662,.T.); +#142660 = VERTEX_POINT('',#142661); +#142661 = CARTESIAN_POINT('',(180.497603,-115.347919,1.585)); +#142662 = CIRCLE('',#142663,7.499979580331E-02); +#142663 = AXIS2_PLACEMENT_3D('',#142664,#142665,#142666); +#142664 = CARTESIAN_POINT('',(180.5726027958,-115.3479193164,1.585)); +#142665 = DIRECTION('',(-0.,0.,-1.)); +#142666 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#142667 = ORIENTED_EDGE('',*,*,#142668,.T.); +#142668 = EDGE_CURVE('',#142660,#142669,#142671,.T.); +#142669 = VERTEX_POINT('',#142670); +#142670 = CARTESIAN_POINT('',(180.497603,-114.841814,1.585)); +#142671 = LINE('',#142672,#142673); +#142672 = CARTESIAN_POINT('',(180.497603,-115.347919,1.585)); +#142673 = VECTOR('',#142674,1.); +#142674 = DIRECTION('',(0.,1.,0.)); +#142675 = ORIENTED_EDGE('',*,*,#142676,.T.); +#142676 = EDGE_CURVE('',#142669,#142677,#142679,.T.); +#142677 = VERTEX_POINT('',#142678); +#142678 = CARTESIAN_POINT('',(180.469082,-114.784772,1.585)); +#142679 = LINE('',#142680,#142681); +#142680 = CARTESIAN_POINT('',(180.497603,-114.841814,1.585)); +#142681 = VECTOR('',#142682,1.); +#142682 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#142683 = ORIENTED_EDGE('',*,*,#142684,.T.); +#142684 = EDGE_CURVE('',#142677,#142685,#142687,.T.); +#142685 = VERTEX_POINT('',#142686); +#142686 = CARTESIAN_POINT('',(180.247551,-114.784772,1.585)); +#142687 = CIRCLE('',#142688,0.186653372204); +#142688 = AXIS2_PLACEMENT_3D('',#142689,#142690,#142691); +#142689 = CARTESIAN_POINT('',(180.3583165,-114.9350067674,1.585)); +#142690 = DIRECTION('',(0.,0.,1.)); +#142691 = DIRECTION('',(0.593428871348,0.804886435872,-0.)); +#142692 = ORIENTED_EDGE('',*,*,#142693,.T.); +#142693 = EDGE_CURVE('',#142685,#142694,#142696,.T.); +#142694 = VERTEX_POINT('',#142695); +#142695 = CARTESIAN_POINT('',(180.219031,-114.841814,1.585)); +#142696 = LINE('',#142697,#142698); +#142697 = CARTESIAN_POINT('',(180.247551,-114.784772,1.585)); +#142698 = VECTOR('',#142699,1.); +#142699 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#142700 = ORIENTED_EDGE('',*,*,#142701,.T.); +#142701 = EDGE_CURVE('',#142694,#142702,#142704,.T.); +#142702 = VERTEX_POINT('',#142703); +#142703 = CARTESIAN_POINT('',(180.21759,-115.362551,1.585)); +#142704 = LINE('',#142705,#142706); +#142705 = CARTESIAN_POINT('',(180.219031,-114.841814,1.585)); +#142706 = VECTOR('',#142707,1.); +#142707 = DIRECTION('',(-2.767221232121E-03,-0.999996171236,0.)); +#142708 = ORIENTED_EDGE('',*,*,#142709,.T.); +#142709 = EDGE_CURVE('',#142702,#142710,#142712,.T.); +#142710 = VERTEX_POINT('',#142711); +#142711 = CARTESIAN_POINT('',(180.069031,-115.347919,1.585)); +#142712 = CIRCLE('',#142713,7.500006711464E-02); +#142713 = AXIS2_PLACEMENT_3D('',#142714,#142715,#142716); +#142714 = CARTESIAN_POINT('',(180.14403106711,-115.3479190671,1.585)); +#142715 = DIRECTION('',(-0.,0.,-1.)); +#142716 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#142717 = ORIENTED_EDGE('',*,*,#142718,.T.); +#142718 = EDGE_CURVE('',#142710,#142719,#142721,.T.); +#142719 = VERTEX_POINT('',#142720); +#142720 = CARTESIAN_POINT('',(180.069031,-114.841814,1.585)); +#142721 = LINE('',#142722,#142723); +#142722 = CARTESIAN_POINT('',(180.069031,-115.347919,1.585)); +#142723 = VECTOR('',#142724,1.); +#142724 = DIRECTION('',(0.,1.,0.)); +#142725 = ORIENTED_EDGE('',*,*,#142726,.T.); +#142726 = EDGE_CURVE('',#142719,#142727,#142729,.T.); +#142727 = VERTEX_POINT('',#142728); +#142728 = CARTESIAN_POINT('',(180.04051,-114.784772,1.585)); +#142729 = LINE('',#142730,#142731); +#142730 = CARTESIAN_POINT('',(180.069031,-114.841814,1.585)); +#142731 = VECTOR('',#142732,1.); +#142732 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#142733 = ORIENTED_EDGE('',*,*,#142734,.T.); +#142734 = EDGE_CURVE('',#142727,#142735,#142737,.T.); +#142735 = VERTEX_POINT('',#142736); +#142736 = CARTESIAN_POINT('',(179.983469,-114.756252,1.585)); +#142737 = LINE('',#142738,#142739); +#142738 = CARTESIAN_POINT('',(180.04051,-114.784772,1.585)); +#142739 = VECTOR('',#142740,1.); +#142740 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#142741 = ORIENTED_EDGE('',*,*,#142742,.T.); +#142742 = EDGE_CURVE('',#142735,#142743,#142745,.T.); +#142743 = VERTEX_POINT('',#142744); +#142744 = CARTESIAN_POINT('',(179.876022,-114.756252,1.585)); +#142745 = LINE('',#142746,#142747); +#142746 = CARTESIAN_POINT('',(179.983469,-114.756252,1.585)); +#142747 = VECTOR('',#142748,1.); +#142748 = DIRECTION('',(-1.,0.,0.)); +#142749 = ORIENTED_EDGE('',*,*,#142750,.T.); +#142750 = EDGE_CURVE('',#142743,#142751,#142753,.T.); +#142751 = VERTEX_POINT('',#142752); +#142752 = CARTESIAN_POINT('',(179.807506,-114.79051,1.585)); +#142753 = LINE('',#142754,#142755); +#142754 = CARTESIAN_POINT('',(179.876022,-114.756252,1.585)); +#142755 = VECTOR('',#142756,1.); +#142756 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#142757 = ORIENTED_EDGE('',*,*,#142758,.T.); +#142758 = EDGE_CURVE('',#142751,#142759,#142761,.T.); +#142759 = VERTEX_POINT('',#142760); +#142760 = CARTESIAN_POINT('',(179.79046,-114.807556,1.585)); +#142761 = LINE('',#142762,#142763); +#142762 = CARTESIAN_POINT('',(179.807506,-114.79051,1.585)); +#142763 = VECTOR('',#142764,1.); +#142764 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#142765 = ORIENTED_EDGE('',*,*,#142766,.T.); +#142766 = EDGE_CURVE('',#142759,#142767,#142769,.T.); +#142767 = VERTEX_POINT('',#142768); +#142768 = CARTESIAN_POINT('',(179.789019,-115.362551,1.585)); +#142769 = LINE('',#142770,#142771); +#142770 = CARTESIAN_POINT('',(179.79046,-114.807556,1.585)); +#142771 = VECTOR('',#142772,1.); +#142772 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#142773 = ORIENTED_EDGE('',*,*,#142774,.T.); +#142774 = EDGE_CURVE('',#142767,#142775,#142777,.T.); +#142775 = VERTEX_POINT('',#142776); +#142776 = CARTESIAN_POINT('',(179.64046,-115.347919,1.585)); +#142777 = CIRCLE('',#142778,7.500006711465E-02); +#142778 = AXIS2_PLACEMENT_3D('',#142779,#142780,#142781); +#142779 = CARTESIAN_POINT('',(179.71546006711,-115.3479190671,1.585)); +#142780 = DIRECTION('',(-0.,0.,-1.)); +#142781 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#142782 = ORIENTED_EDGE('',*,*,#142783,.T.); +#142783 = EDGE_CURVE('',#142775,#142784,#142786,.T.); +#142784 = VERTEX_POINT('',#142785); +#142785 = CARTESIAN_POINT('',(179.641901,-114.66662,1.585)); +#142786 = LINE('',#142787,#142788); +#142787 = CARTESIAN_POINT('',(179.64046,-115.347919,1.585)); +#142788 = VECTOR('',#142789,1.); +#142789 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#142790 = ORIENTED_EDGE('',*,*,#142791,.T.); +#142791 = EDGE_CURVE('',#142784,#142792,#142794,.T.); +#142792 = VERTEX_POINT('',#142793); +#142793 = CARTESIAN_POINT('',(179.6531,-114.639584,1.585)); +#142794 = LINE('',#142795,#142796); +#142795 = CARTESIAN_POINT('',(179.641901,-114.66662,1.585)); +#142796 = VECTOR('',#142797,1.); +#142797 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#142798 = ORIENTED_EDGE('',*,*,#142799,.T.); +#142799 = EDGE_CURVE('',#142792,#142591,#142800,.T.); +#142800 = LINE('',#142801,#142802); +#142801 = CARTESIAN_POINT('',(179.6531,-114.639584,1.585)); +#142802 = VECTOR('',#142803,1.); +#142803 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#142804 = PLANE('',#142805); +#142805 = AXIS2_PLACEMENT_3D('',#142806,#142807,#142808); +#142806 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142807 = DIRECTION('',(0.,0.,1.)); +#142808 = DIRECTION('',(1.,0.,-0.)); +#142809 = SHELL_BASED_SURFACE_MODEL('',(#142810)); +#142810 = OPEN_SHELL('',(#142811)); +#142811 = ADVANCED_FACE('',(#142812),#142848,.T.); +#142812 = FACE_BOUND('',#142813,.F.); +#142813 = EDGE_LOOP('',(#142814,#142825,#142833,#142842)); +#142814 = ORIENTED_EDGE('',*,*,#142815,.T.); +#142815 = EDGE_CURVE('',#142816,#142818,#142820,.T.); +#142816 = VERTEX_POINT('',#142817); +#142817 = CARTESIAN_POINT('',(187.82607,-115.3931,1.585)); +#142818 = VERTEX_POINT('',#142819); +#142819 = CARTESIAN_POINT('',(187.82607,-115.2731,1.585)); +#142820 = CIRCLE('',#142821,6.000000000043E-02); +#142821 = AXIS2_PLACEMENT_3D('',#142822,#142823,#142824); +#142822 = CARTESIAN_POINT('',(187.82606977441,-115.3331,1.585)); +#142823 = DIRECTION('',(0.,0.,-1.)); +#142824 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#142825 = ORIENTED_EDGE('',*,*,#142826,.T.); +#142826 = EDGE_CURVE('',#142818,#142827,#142829,.T.); +#142827 = VERTEX_POINT('',#142828); +#142828 = CARTESIAN_POINT('',(188.10723,-115.2731,1.585)); +#142829 = LINE('',#142830,#142831); +#142830 = CARTESIAN_POINT('',(187.82607,-115.2731,1.585)); +#142831 = VECTOR('',#142832,1.); +#142832 = DIRECTION('',(1.,0.,0.)); +#142833 = ORIENTED_EDGE('',*,*,#142834,.T.); +#142834 = EDGE_CURVE('',#142827,#142835,#142837,.T.); +#142835 = VERTEX_POINT('',#142836); +#142836 = CARTESIAN_POINT('',(188.10723,-115.3931,1.585)); +#142837 = CIRCLE('',#142838,6.000000000042E-02); +#142838 = AXIS2_PLACEMENT_3D('',#142839,#142840,#142841); +#142839 = CARTESIAN_POINT('',(188.10723022558,-115.3331,1.585)); +#142840 = DIRECTION('',(0.,0.,-1.)); +#142841 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#142842 = ORIENTED_EDGE('',*,*,#142843,.T.); +#142843 = EDGE_CURVE('',#142835,#142816,#142844,.T.); +#142844 = LINE('',#142845,#142846); +#142845 = CARTESIAN_POINT('',(188.10723,-115.3931,1.585)); +#142846 = VECTOR('',#142847,1.); +#142847 = DIRECTION('',(-1.,0.,0.)); +#142848 = PLANE('',#142849); +#142849 = AXIS2_PLACEMENT_3D('',#142850,#142851,#142852); +#142850 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142851 = DIRECTION('',(0.,0.,1.)); +#142852 = DIRECTION('',(1.,0.,-0.)); +#142853 = SHELL_BASED_SURFACE_MODEL('',(#142854)); +#142854 = OPEN_SHELL('',(#142855)); +#142855 = ADVANCED_FACE('',(#142856),#142950,.T.); +#142856 = FACE_BOUND('',#142857,.F.); +#142857 = EDGE_LOOP('',(#142858,#142869,#142877,#142885,#142893,#142902, + #142910,#142919,#142927,#142936,#142944)); +#142858 = ORIENTED_EDGE('',*,*,#142859,.T.); +#142859 = EDGE_CURVE('',#142860,#142862,#142864,.T.); +#142860 = VERTEX_POINT('',#142861); +#142861 = CARTESIAN_POINT('',(195.506217,-115.015139,1.585)); +#142862 = VERTEX_POINT('',#142863); +#142863 = CARTESIAN_POINT('',(195.617083,-115.015139,1.585)); +#142864 = CIRCLE('',#142865,6.000020841632E-02); +#142865 = AXIS2_PLACEMENT_3D('',#142866,#142867,#142868); +#142866 = CARTESIAN_POINT('',(195.56165,-115.0381,1.585)); +#142867 = DIRECTION('',(0.,0.,-1.)); +#142868 = DIRECTION('',(-0.923880124139,0.382682004047,0.)); +#142869 = ORIENTED_EDGE('',*,*,#142870,.T.); +#142870 = EDGE_CURVE('',#142862,#142871,#142873,.T.); +#142871 = VERTEX_POINT('',#142872); +#142872 = CARTESIAN_POINT('',(195.62165,-115.0731,1.585)); +#142873 = LINE('',#142874,#142875); +#142874 = CARTESIAN_POINT('',(195.617083,-115.015139,1.585)); +#142875 = VECTOR('',#142876,1.); +#142876 = DIRECTION('',(7.855089539688E-02,-0.99691010469,0.)); +#142877 = ORIENTED_EDGE('',*,*,#142878,.T.); +#142878 = EDGE_CURVE('',#142871,#142879,#142881,.T.); +#142879 = VERTEX_POINT('',#142880); +#142880 = CARTESIAN_POINT('',(199.62165,-115.0731,1.585)); +#142881 = LINE('',#142882,#142883); +#142882 = CARTESIAN_POINT('',(195.62165,-115.0731,1.585)); +#142883 = VECTOR('',#142884,1.); +#142884 = DIRECTION('',(1.,0.,0.)); +#142885 = ORIENTED_EDGE('',*,*,#142886,.T.); +#142886 = EDGE_CURVE('',#142879,#142887,#142889,.T.); +#142887 = VERTEX_POINT('',#142888); +#142888 = CARTESIAN_POINT('',(199.626217,-115.015139,1.585)); +#142889 = LINE('',#142890,#142891); +#142890 = CARTESIAN_POINT('',(199.62165,-115.0731,1.585)); +#142891 = VECTOR('',#142892,1.); +#142892 = DIRECTION('',(7.855089539737E-02,0.99691010469,0.)); +#142893 = ORIENTED_EDGE('',*,*,#142894,.T.); +#142894 = EDGE_CURVE('',#142887,#142895,#142897,.T.); +#142895 = VERTEX_POINT('',#142896); +#142896 = CARTESIAN_POINT('',(199.74165,-115.0381,1.585)); +#142897 = CIRCLE('',#142898,6.000007318647E-02); +#142898 = AXIS2_PLACEMENT_3D('',#142899,#142900,#142901); +#142899 = CARTESIAN_POINT('',(199.68164992681,-115.0380998233,1.585)); +#142900 = DIRECTION('',(0.,0.,-1.)); +#142901 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#142902 = ORIENTED_EDGE('',*,*,#142903,.T.); +#142903 = EDGE_CURVE('',#142895,#142904,#142906,.T.); +#142904 = VERTEX_POINT('',#142905); +#142905 = CARTESIAN_POINT('',(199.74165,-115.1331,1.585)); +#142906 = LINE('',#142907,#142908); +#142907 = CARTESIAN_POINT('',(199.74165,-115.0381,1.585)); +#142908 = VECTOR('',#142909,1.); +#142909 = DIRECTION('',(0.,-1.,0.)); +#142910 = ORIENTED_EDGE('',*,*,#142911,.T.); +#142911 = EDGE_CURVE('',#142904,#142912,#142914,.T.); +#142912 = VERTEX_POINT('',#142913); +#142913 = CARTESIAN_POINT('',(199.68165,-115.1931,1.585)); +#142914 = CIRCLE('',#142915,5.999932016256E-02); +#142915 = AXIS2_PLACEMENT_3D('',#142916,#142917,#142918); +#142916 = CARTESIAN_POINT('',(199.68165067984,-115.1331006798,1.585)); +#142917 = DIRECTION('',(0.,0.,-1.)); +#142918 = DIRECTION('',(0.999999999936,1.133081659513E-05,0.)); +#142919 = ORIENTED_EDGE('',*,*,#142920,.T.); +#142920 = EDGE_CURVE('',#142912,#142921,#142923,.T.); +#142921 = VERTEX_POINT('',#142922); +#142922 = CARTESIAN_POINT('',(195.56165,-115.1931,1.585)); +#142923 = LINE('',#142924,#142925); +#142924 = CARTESIAN_POINT('',(199.68165,-115.1931,1.585)); +#142925 = VECTOR('',#142926,1.); +#142926 = DIRECTION('',(-1.,0.,0.)); +#142927 = ORIENTED_EDGE('',*,*,#142928,.T.); +#142928 = EDGE_CURVE('',#142921,#142929,#142931,.T.); +#142929 = VERTEX_POINT('',#142930); +#142930 = CARTESIAN_POINT('',(195.50165,-115.1331,1.585)); +#142931 = CIRCLE('',#142932,5.999932016256E-02); +#142932 = AXIS2_PLACEMENT_3D('',#142933,#142934,#142935); +#142933 = CARTESIAN_POINT('',(195.56164932015,-115.1331006798,1.585)); +#142934 = DIRECTION('',(0.,0.,-1.)); +#142935 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#142936 = ORIENTED_EDGE('',*,*,#142937,.T.); +#142937 = EDGE_CURVE('',#142929,#142938,#142940,.T.); +#142938 = VERTEX_POINT('',#142939); +#142939 = CARTESIAN_POINT('',(195.50165,-115.0381,1.585)); +#142940 = LINE('',#142941,#142942); +#142941 = CARTESIAN_POINT('',(195.50165,-115.1331,1.585)); +#142942 = VECTOR('',#142943,1.); +#142943 = DIRECTION('',(0.,1.,0.)); +#142944 = ORIENTED_EDGE('',*,*,#142945,.T.); +#142945 = EDGE_CURVE('',#142938,#142860,#142946,.T.); +#142946 = LINE('',#142947,#142948); +#142947 = CARTESIAN_POINT('',(195.50165,-115.0381,1.585)); +#142948 = VECTOR('',#142949,1.); +#142949 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#142950 = PLANE('',#142951); +#142951 = AXIS2_PLACEMENT_3D('',#142952,#142953,#142954); +#142952 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142953 = DIRECTION('',(0.,0.,1.)); +#142954 = DIRECTION('',(1.,0.,-0.)); +#142955 = SHELL_BASED_SURFACE_MODEL('',(#142956)); +#142956 = OPEN_SHELL('',(#142957)); +#142957 = ADVANCED_FACE('',(#142958),#142994,.T.); +#142958 = FACE_BOUND('',#142959,.F.); +#142959 = EDGE_LOOP('',(#142960,#142971,#142979,#142988)); +#142960 = ORIENTED_EDGE('',*,*,#142961,.T.); +#142961 = EDGE_CURVE('',#142962,#142964,#142966,.T.); +#142962 = VERTEX_POINT('',#142963); +#142963 = CARTESIAN_POINT('',(187.82607,-114.3731,1.585)); +#142964 = VERTEX_POINT('',#142965); +#142965 = CARTESIAN_POINT('',(187.82607,-114.2531,1.585)); +#142966 = CIRCLE('',#142967,6.000000000042E-02); +#142967 = AXIS2_PLACEMENT_3D('',#142968,#142969,#142970); +#142968 = CARTESIAN_POINT('',(187.82606977441,-114.3131,1.585)); +#142969 = DIRECTION('',(0.,0.,-1.)); +#142970 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#142971 = ORIENTED_EDGE('',*,*,#142972,.T.); +#142972 = EDGE_CURVE('',#142964,#142973,#142975,.T.); +#142973 = VERTEX_POINT('',#142974); +#142974 = CARTESIAN_POINT('',(188.10723,-114.2531,1.585)); +#142975 = LINE('',#142976,#142977); +#142976 = CARTESIAN_POINT('',(187.82607,-114.2531,1.585)); +#142977 = VECTOR('',#142978,1.); +#142978 = DIRECTION('',(1.,0.,0.)); +#142979 = ORIENTED_EDGE('',*,*,#142980,.T.); +#142980 = EDGE_CURVE('',#142973,#142981,#142983,.T.); +#142981 = VERTEX_POINT('',#142982); +#142982 = CARTESIAN_POINT('',(188.10723,-114.3731,1.585)); +#142983 = CIRCLE('',#142984,6.000000000042E-02); +#142984 = AXIS2_PLACEMENT_3D('',#142985,#142986,#142987); +#142985 = CARTESIAN_POINT('',(188.10723022558,-114.3131,1.585)); +#142986 = DIRECTION('',(0.,0.,-1.)); +#142987 = DIRECTION('',(-3.75979472738E-06,0.999999999993,-0.)); +#142988 = ORIENTED_EDGE('',*,*,#142989,.T.); +#142989 = EDGE_CURVE('',#142981,#142962,#142990,.T.); +#142990 = LINE('',#142991,#142992); +#142991 = CARTESIAN_POINT('',(188.10723,-114.3731,1.585)); +#142992 = VECTOR('',#142993,1.); +#142993 = DIRECTION('',(-1.,0.,0.)); +#142994 = PLANE('',#142995); +#142995 = AXIS2_PLACEMENT_3D('',#142996,#142997,#142998); +#142996 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142997 = DIRECTION('',(0.,0.,1.)); +#142998 = DIRECTION('',(1.,0.,-0.)); +#142999 = SHELL_BASED_SURFACE_MODEL('',(#143000)); +#143000 = OPEN_SHELL('',(#143001)); +#143001 = ADVANCED_FACE('',(#143002,#143104),#143172,.T.); +#143002 = FACE_BOUND('',#143003,.F.); +#143003 = EDGE_LOOP('',(#143004,#143015,#143023,#143031,#143040,#143048, + #143057,#143065,#143073,#143082,#143090,#143098)); +#143004 = ORIENTED_EDGE('',*,*,#143005,.T.); +#143005 = EDGE_CURVE('',#143006,#143008,#143010,.T.); +#143006 = VERTEX_POINT('',#143007); +#143007 = CARTESIAN_POINT('',(189.282125,-113.118892,1.585)); +#143008 = VERTEX_POINT('',#143009); +#143009 = CARTESIAN_POINT('',(189.368989,-113.12242,1.585)); +#143010 = CIRCLE('',#143011,7.226649079677E-02); +#143011 = AXIS2_PLACEMENT_3D('',#143012,#143013,#143014); +#143012 = CARTESIAN_POINT('',(189.32321412996,-113.1783405415,1.585)); +#143013 = DIRECTION('',(0.,0.,-1.)); +#143014 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#143015 = ORIENTED_EDGE('',*,*,#143016,.T.); +#143016 = EDGE_CURVE('',#143008,#143017,#143019,.T.); +#143017 = VERTEX_POINT('',#143018); +#143018 = CARTESIAN_POINT('',(189.404399,-113.107693,1.585)); +#143019 = LINE('',#143020,#143021); +#143020 = CARTESIAN_POINT('',(189.368989,-113.12242,1.585)); +#143021 = VECTOR('',#143022,1.); +#143022 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#143023 = ORIENTED_EDGE('',*,*,#143024,.T.); +#143024 = EDGE_CURVE('',#143017,#143025,#143027,.T.); +#143025 = VERTEX_POINT('',#143026); +#143026 = CARTESIAN_POINT('',(189.624139,-113.107693,1.585)); +#143027 = LINE('',#143028,#143029); +#143028 = CARTESIAN_POINT('',(189.404399,-113.107693,1.585)); +#143029 = VECTOR('',#143030,1.); +#143030 = DIRECTION('',(1.,0.,0.)); +#143031 = ORIENTED_EDGE('',*,*,#143032,.T.); +#143032 = EDGE_CURVE('',#143025,#143033,#143035,.T.); +#143033 = VERTEX_POINT('',#143034); +#143034 = CARTESIAN_POINT('',(189.873542,-113.357096,1.585)); +#143035 = CIRCLE('',#143036,0.347870264855); +#143036 = AXIS2_PLACEMENT_3D('',#143037,#143038,#143039); +#143037 = CARTESIAN_POINT('',(189.53681126502,-113.4444237349,1.585)); +#143038 = DIRECTION('',(0.,0.,-1.)); +#143039 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#143040 = ORIENTED_EDGE('',*,*,#143041,.T.); +#143041 = EDGE_CURVE('',#143033,#143042,#143044,.T.); +#143042 = VERTEX_POINT('',#143043); +#143043 = CARTESIAN_POINT('',(189.87232,-113.677252,1.585)); +#143044 = LINE('',#143045,#143046); +#143045 = CARTESIAN_POINT('',(189.873542,-113.357096,1.585)); +#143046 = VECTOR('',#143047,1.); +#143047 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#143048 = ORIENTED_EDGE('',*,*,#143049,.T.); +#143049 = EDGE_CURVE('',#143042,#143050,#143052,.T.); +#143050 = VERTEX_POINT('',#143051); +#143051 = CARTESIAN_POINT('',(189.624139,-113.921478,1.585)); +#143052 = CIRCLE('',#143053,0.348635327447); +#143053 = AXIS2_PLACEMENT_3D('',#143054,#143055,#143056); +#143054 = CARTESIAN_POINT('',(189.53636748129,-113.5840720841,1.585)); +#143055 = DIRECTION('',(0.,0.,-1.)); +#143056 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#143057 = ORIENTED_EDGE('',*,*,#143058,.T.); +#143058 = EDGE_CURVE('',#143050,#143059,#143061,.T.); +#143059 = VERTEX_POINT('',#143060); +#143060 = CARTESIAN_POINT('',(189.398793,-113.920092,1.585)); +#143061 = LINE('',#143062,#143063); +#143062 = CARTESIAN_POINT('',(189.624139,-113.921478,1.585)); +#143063 = VECTOR('',#143064,1.); +#143064 = DIRECTION('',(-0.999981085954,6.150425501802E-03,0.)); +#143065 = ORIENTED_EDGE('',*,*,#143066,.T.); +#143066 = EDGE_CURVE('',#143059,#143067,#143069,.T.); +#143067 = VERTEX_POINT('',#143068); +#143068 = CARTESIAN_POINT('',(189.397352,-114.195884,1.585)); +#143069 = LINE('',#143070,#143071); +#143070 = CARTESIAN_POINT('',(189.398793,-113.920092,1.585)); +#143071 = VECTOR('',#143072,1.); +#143072 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#143073 = ORIENTED_EDGE('',*,*,#143074,.T.); +#143074 = EDGE_CURVE('',#143067,#143075,#143077,.T.); +#143075 = VERTEX_POINT('',#143076); +#143076 = CARTESIAN_POINT('',(189.248793,-114.181252,1.585)); +#143077 = CIRCLE('',#143078,7.500006711464E-02); +#143078 = AXIS2_PLACEMENT_3D('',#143079,#143080,#143081); +#143079 = CARTESIAN_POINT('',(189.32379306711,-114.1812520671,1.585)); +#143080 = DIRECTION('',(-0.,0.,-1.)); +#143081 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#143082 = ORIENTED_EDGE('',*,*,#143083,.T.); +#143083 = EDGE_CURVE('',#143075,#143084,#143086,.T.); +#143084 = VERTEX_POINT('',#143085); +#143085 = CARTESIAN_POINT('',(189.250234,-113.16662,1.585)); +#143086 = LINE('',#143087,#143088); +#143087 = CARTESIAN_POINT('',(189.248793,-114.181252,1.585)); +#143088 = VECTOR('',#143089,1.); +#143089 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#143090 = ORIENTED_EDGE('',*,*,#143091,.T.); +#143091 = EDGE_CURVE('',#143084,#143092,#143094,.T.); +#143092 = VERTEX_POINT('',#143093); +#143093 = CARTESIAN_POINT('',(189.261433,-113.139584,1.585)); +#143094 = LINE('',#143095,#143096); +#143095 = CARTESIAN_POINT('',(189.250234,-113.16662,1.585)); +#143096 = VECTOR('',#143097,1.); +#143097 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#143098 = ORIENTED_EDGE('',*,*,#143099,.T.); +#143099 = EDGE_CURVE('',#143092,#143006,#143100,.T.); +#143100 = LINE('',#143101,#143102); +#143101 = CARTESIAN_POINT('',(189.261433,-113.139584,1.585)); +#143102 = VECTOR('',#143103,1.); +#143103 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#143104 = FACE_BOUND('',#143105,.F.); +#143105 = EDGE_LOOP('',(#143106,#143117,#143125,#143133,#143141,#143149, + #143157,#143166)); +#143106 = ORIENTED_EDGE('',*,*,#143107,.T.); +#143107 = EDGE_CURVE('',#143108,#143110,#143112,.T.); +#143108 = VERTEX_POINT('',#143109); +#143109 = CARTESIAN_POINT('',(189.724983,-113.389433,1.585)); +#143110 = VERTEX_POINT('',#143111); +#143111 = CARTESIAN_POINT('',(189.591802,-113.256252,1.585)); +#143112 = CIRCLE('',#143113,0.18686440374); +#143113 = AXIS2_PLACEMENT_3D('',#143114,#143115,#143116); +#143114 = CARTESIAN_POINT('',(189.544266,-113.436969,1.585)); +#143115 = DIRECTION('',(0.,0.,1.)); +#143116 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#143117 = ORIENTED_EDGE('',*,*,#143118,.T.); +#143118 = EDGE_CURVE('',#143110,#143119,#143121,.T.); +#143119 = VERTEX_POINT('',#143120); +#143120 = CARTESIAN_POINT('',(189.436736,-113.256252,1.585)); +#143121 = LINE('',#143122,#143123); +#143122 = CARTESIAN_POINT('',(189.591802,-113.256252,1.585)); +#143123 = VECTOR('',#143124,1.); +#143124 = DIRECTION('',(-1.,0.,0.)); +#143125 = ORIENTED_EDGE('',*,*,#143126,.T.); +#143126 = EDGE_CURVE('',#143119,#143127,#143129,.T.); +#143127 = VERTEX_POINT('',#143128); +#143128 = CARTESIAN_POINT('',(189.398793,-113.275223,1.585)); +#143129 = LINE('',#143130,#143131); +#143130 = CARTESIAN_POINT('',(189.436736,-113.256252,1.585)); +#143131 = VECTOR('',#143132,1.); +#143132 = DIRECTION('',(-0.894431905558,-0.447204166259,0.)); +#143133 = ORIENTED_EDGE('',*,*,#143134,.T.); +#143134 = EDGE_CURVE('',#143127,#143135,#143137,.T.); +#143135 = VERTEX_POINT('',#143136); +#143136 = CARTESIAN_POINT('',(189.398793,-113.753947,1.585)); +#143137 = LINE('',#143138,#143139); +#143138 = CARTESIAN_POINT('',(189.398793,-113.275223,1.585)); +#143139 = VECTOR('',#143140,1.); +#143140 = DIRECTION('',(0.,-1.,0.)); +#143141 = ORIENTED_EDGE('',*,*,#143142,.T.); +#143142 = EDGE_CURVE('',#143135,#143143,#143145,.T.); +#143143 = VERTEX_POINT('',#143144); +#143144 = CARTESIAN_POINT('',(189.436736,-113.772919,1.585)); +#143145 = LINE('',#143146,#143147); +#143146 = CARTESIAN_POINT('',(189.398793,-113.753947,1.585)); +#143147 = VECTOR('',#143148,1.); +#143148 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#143149 = ORIENTED_EDGE('',*,*,#143150,.T.); +#143150 = EDGE_CURVE('',#143143,#143151,#143153,.T.); +#143151 = VERTEX_POINT('',#143152); +#143152 = CARTESIAN_POINT('',(189.591802,-113.772919,1.585)); +#143153 = LINE('',#143154,#143155); +#143154 = CARTESIAN_POINT('',(189.436736,-113.772919,1.585)); +#143155 = VECTOR('',#143156,1.); +#143156 = DIRECTION('',(1.,0.,0.)); +#143157 = ORIENTED_EDGE('',*,*,#143158,.T.); +#143158 = EDGE_CURVE('',#143151,#143159,#143161,.T.); +#143159 = VERTEX_POINT('',#143160); +#143160 = CARTESIAN_POINT('',(189.724983,-113.639737,1.585)); +#143161 = CIRCLE('',#143162,0.186867760544); +#143162 = AXIS2_PLACEMENT_3D('',#143163,#143164,#143165); +#143163 = CARTESIAN_POINT('',(189.54426296928,-113.5921993262,1.585)); +#143164 = DIRECTION('',(0.,0.,1.)); +#143165 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#143166 = ORIENTED_EDGE('',*,*,#143167,.T.); +#143167 = EDGE_CURVE('',#143159,#143108,#143168,.T.); +#143168 = LINE('',#143169,#143170); +#143169 = CARTESIAN_POINT('',(189.724983,-113.639737,1.585)); +#143170 = VECTOR('',#143171,1.); +#143171 = DIRECTION('',(0.,1.,0.)); +#143172 = PLANE('',#143173); +#143173 = AXIS2_PLACEMENT_3D('',#143174,#143175,#143176); +#143174 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143175 = DIRECTION('',(0.,0.,1.)); +#143176 = DIRECTION('',(1.,0.,-0.)); +#143177 = SHELL_BASED_SURFACE_MODEL('',(#143178)); +#143178 = OPEN_SHELL('',(#143179)); +#143179 = ADVANCED_FACE('',(#143180),#143224,.T.); +#143180 = FACE_BOUND('',#143181,.F.); +#143181 = EDGE_LOOP('',(#143182,#143193,#143201,#143209,#143218)); +#143182 = ORIENTED_EDGE('',*,*,#143183,.T.); +#143183 = EDGE_CURVE('',#143184,#143186,#143188,.T.); +#143184 = VERTEX_POINT('',#143185); +#143185 = CARTESIAN_POINT('',(165.64165,-114.2331,1.585)); +#143186 = VERTEX_POINT('',#143187); +#143187 = CARTESIAN_POINT('',(165.64165,-114.1131,1.585)); +#143188 = CIRCLE('',#143189,6.000000000042E-02); +#143189 = AXIS2_PLACEMENT_3D('',#143190,#143191,#143192); +#143190 = CARTESIAN_POINT('',(165.64164977441,-114.1731,1.585)); +#143191 = DIRECTION('',(0.,0.,-1.)); +#143192 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#143193 = ORIENTED_EDGE('',*,*,#143194,.T.); +#143194 = EDGE_CURVE('',#143186,#143195,#143197,.T.); +#143195 = VERTEX_POINT('',#143196); +#143196 = CARTESIAN_POINT('',(169.590132,-114.1131,1.585)); +#143197 = LINE('',#143198,#143199); +#143198 = CARTESIAN_POINT('',(165.64165,-114.1131,1.585)); +#143199 = VECTOR('',#143200,1.); +#143200 = DIRECTION('',(1.,0.,0.)); +#143201 = ORIENTED_EDGE('',*,*,#143202,.T.); +#143202 = EDGE_CURVE('',#143195,#143203,#143205,.T.); +#143203 = VERTEX_POINT('',#143204); +#143204 = CARTESIAN_POINT('',(169.590132,-114.116464,1.585)); +#143205 = LINE('',#143206,#143207); +#143206 = CARTESIAN_POINT('',(169.590132,-114.1131,1.585)); +#143207 = VECTOR('',#143208,1.); +#143208 = DIRECTION('',(0.,-1.,0.)); +#143209 = ORIENTED_EDGE('',*,*,#143210,.T.); +#143210 = EDGE_CURVE('',#143203,#143211,#143213,.T.); +#143211 = VERTEX_POINT('',#143212); +#143212 = CARTESIAN_POINT('',(169.705046,-114.2331,1.585)); +#143213 = CIRCLE('',#143214,0.148598700063); +#143214 = AXIS2_PLACEMENT_3D('',#143215,#143216,#143217); +#143215 = CARTESIAN_POINT('',(169.73592928371,-114.0877459617,1.585)); +#143216 = DIRECTION('',(0.,0.,1.)); +#143217 = DIRECTION('',(-0.981147773484,-0.193259014244,0.)); +#143218 = ORIENTED_EDGE('',*,*,#143219,.T.); +#143219 = EDGE_CURVE('',#143211,#143184,#143220,.T.); +#143220 = LINE('',#143221,#143222); +#143221 = CARTESIAN_POINT('',(169.705046,-114.2331,1.585)); +#143222 = VECTOR('',#143223,1.); +#143223 = DIRECTION('',(-1.,0.,0.)); +#143224 = PLANE('',#143225); +#143225 = AXIS2_PLACEMENT_3D('',#143226,#143227,#143228); +#143226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143227 = DIRECTION('',(0.,0.,1.)); +#143228 = DIRECTION('',(1.,0.,-0.)); +#143229 = SHELL_BASED_SURFACE_MODEL('',(#143230)); +#143230 = OPEN_SHELL('',(#143231)); +#143231 = ADVANCED_FACE('',(#143232),#143391,.T.); +#143232 = FACE_BOUND('',#143233,.F.); +#143233 = EDGE_LOOP('',(#143234,#143245,#143253,#143261,#143269,#143277, + #143285,#143293,#143302,#143310,#143319,#143327,#143335,#143343, + #143352,#143360,#143368,#143376,#143385)); +#143234 = ORIENTED_EDGE('',*,*,#143235,.T.); +#143235 = EDGE_CURVE('',#143236,#143238,#143240,.T.); +#143236 = VERTEX_POINT('',#143237); +#143237 = CARTESIAN_POINT('',(190.195014,-112.828456,1.585)); +#143238 = VERTEX_POINT('',#143239); +#143239 = CARTESIAN_POINT('',(190.704409,-112.837786,1.585)); +#143240 = CIRCLE('',#143241,0.450326844012); +#143241 = AXIS2_PLACEMENT_3D('',#143242,#143243,#143244); +#143242 = CARTESIAN_POINT('',(190.4429110301,-113.2044098919,1.585)); +#143243 = DIRECTION('',(0.,0.,-1.)); +#143244 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#143245 = ORIENTED_EDGE('',*,*,#143246,.T.); +#143246 = EDGE_CURVE('',#143238,#143247,#143249,.T.); +#143247 = VERTEX_POINT('',#143248); +#143248 = CARTESIAN_POINT('',(190.767862,-112.903316,1.585)); +#143249 = LINE('',#143250,#143251); +#143250 = CARTESIAN_POINT('',(190.704409,-112.837786,1.585)); +#143251 = VECTOR('',#143252,1.); +#143252 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#143253 = ORIENTED_EDGE('',*,*,#143254,.T.); +#143254 = EDGE_CURVE('',#143247,#143255,#143257,.T.); +#143255 = VERTEX_POINT('',#143256); +#143256 = CARTESIAN_POINT('',(190.825923,-113.023763,1.585)); +#143257 = LINE('',#143258,#143259); +#143258 = CARTESIAN_POINT('',(190.767862,-112.903316,1.585)); +#143259 = VECTOR('',#143260,1.); +#143260 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#143261 = ORIENTED_EDGE('',*,*,#143262,.T.); +#143262 = EDGE_CURVE('',#143255,#143263,#143265,.T.); +#143263 = VERTEX_POINT('',#143264); +#143264 = CARTESIAN_POINT('',(190.825164,-113.150095,1.585)); +#143265 = LINE('',#143266,#143267); +#143266 = CARTESIAN_POINT('',(190.825923,-113.023763,1.585)); +#143267 = VECTOR('',#143268,1.); +#143268 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#143269 = ORIENTED_EDGE('',*,*,#143270,.T.); +#143270 = EDGE_CURVE('',#143263,#143271,#143273,.T.); +#143271 = VERTEX_POINT('',#143272); +#143272 = CARTESIAN_POINT('',(190.767106,-113.318158,1.585)); +#143273 = LINE('',#143274,#143275); +#143274 = CARTESIAN_POINT('',(190.825164,-113.150095,1.585)); +#143275 = VECTOR('',#143276,1.); +#143276 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#143277 = ORIENTED_EDGE('',*,*,#143278,.T.); +#143278 = EDGE_CURVE('',#143271,#143279,#143281,.T.); +#143279 = VERTEX_POINT('',#143280); +#143280 = CARTESIAN_POINT('',(190.314383,-113.772919,1.585)); +#143281 = LINE('',#143282,#143283); +#143282 = CARTESIAN_POINT('',(190.767106,-113.318158,1.585)); +#143283 = VECTOR('',#143284,1.); +#143284 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#143285 = ORIENTED_EDGE('',*,*,#143286,.T.); +#143286 = EDGE_CURVE('',#143279,#143287,#143289,.T.); +#143287 = VERTEX_POINT('',#143288); +#143288 = CARTESIAN_POINT('',(190.766996,-113.77436,1.585)); +#143289 = LINE('',#143290,#143291); +#143290 = CARTESIAN_POINT('',(190.314383,-113.772919,1.585)); +#143291 = VECTOR('',#143292,1.); +#143292 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#143293 = ORIENTED_EDGE('',*,*,#143294,.T.); +#143294 = EDGE_CURVE('',#143287,#143295,#143297,.T.); +#143295 = VERTEX_POINT('',#143296); +#143296 = CARTESIAN_POINT('',(190.752364,-113.922919,1.585)); +#143297 = CIRCLE('',#143298,7.500006711464E-02); +#143298 = AXIS2_PLACEMENT_3D('',#143299,#143300,#143301); +#143299 = CARTESIAN_POINT('',(190.75236406711,-113.8479189328,1.585)); +#143300 = DIRECTION('',(0.,0.,-1.)); +#143301 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#143302 = ORIENTED_EDGE('',*,*,#143303,.T.); +#143303 = EDGE_CURVE('',#143295,#143304,#143306,.T.); +#143304 = VERTEX_POINT('',#143305); +#143305 = CARTESIAN_POINT('',(190.118685,-113.921478,1.585)); +#143306 = LINE('',#143307,#143308); +#143307 = CARTESIAN_POINT('',(190.752364,-113.922919,1.585)); +#143308 = VECTOR('',#143309,1.); +#143309 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#143310 = ORIENTED_EDGE('',*,*,#143311,.T.); +#143311 = EDGE_CURVE('',#143304,#143312,#143314,.T.); +#143312 = VERTEX_POINT('',#143313); +#143313 = CARTESIAN_POINT('',(190.080284,-113.794886,1.585)); +#143314 = CIRCLE('',#143315,7.500021013107E-02); +#143315 = AXIS2_PLACEMENT_3D('',#143316,#143317,#143318); +#143316 = CARTESIAN_POINT('',(190.1333173167,-113.8479189976,1.585)); +#143317 = DIRECTION('',(0.,0.,-1.)); +#143318 = DIRECTION('',(-0.195097009435,-0.980783950169,-0.)); +#143319 = ORIENTED_EDGE('',*,*,#143320,.T.); +#143320 = EDGE_CURVE('',#143312,#143321,#143323,.T.); +#143321 = VERTEX_POINT('',#143322); +#143322 = CARTESIAN_POINT('',(190.639192,-113.235976,1.585)); +#143323 = LINE('',#143324,#143325); +#143324 = CARTESIAN_POINT('',(190.080284,-113.794886,1.585)); +#143325 = VECTOR('',#143326,1.); +#143326 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#143327 = ORIENTED_EDGE('',*,*,#143328,.T.); +#143328 = EDGE_CURVE('',#143321,#143329,#143331,.T.); +#143329 = VERTEX_POINT('',#143330); +#143330 = CARTESIAN_POINT('',(190.677364,-113.121463,1.585)); +#143331 = LINE('',#143332,#143333); +#143332 = CARTESIAN_POINT('',(190.639192,-113.235976,1.585)); +#143333 = VECTOR('',#143334,1.); +#143334 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#143335 = ORIENTED_EDGE('',*,*,#143336,.T.); +#143336 = EDGE_CURVE('',#143329,#143337,#143339,.T.); +#143337 = VERTEX_POINT('',#143338); +#143338 = CARTESIAN_POINT('',(190.677364,-113.0561,1.585)); +#143339 = LINE('',#143340,#143341); +#143340 = CARTESIAN_POINT('',(190.677364,-113.121463,1.585)); +#143341 = VECTOR('',#143342,1.); +#143342 = DIRECTION('',(0.,1.,0.)); +#143343 = ORIENTED_EDGE('',*,*,#143344,.T.); +#143344 = EDGE_CURVE('',#143337,#143345,#143347,.T.); +#143345 = VERTEX_POINT('',#143346); +#143346 = CARTESIAN_POINT('',(190.544183,-112.922919,1.585)); +#143347 = CIRCLE('',#143348,0.18686440374); +#143348 = AXIS2_PLACEMENT_3D('',#143349,#143350,#143351); +#143349 = CARTESIAN_POINT('',(190.496647,-113.103636,1.585)); +#143350 = DIRECTION('',(0.,0.,1.)); +#143351 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#143352 = ORIENTED_EDGE('',*,*,#143353,.T.); +#143353 = EDGE_CURVE('',#143345,#143354,#143356,.T.); +#143354 = VERTEX_POINT('',#143355); +#143355 = CARTESIAN_POINT('',(190.341498,-112.922919,1.585)); +#143356 = LINE('',#143357,#143358); +#143357 = CARTESIAN_POINT('',(190.544183,-112.922919,1.585)); +#143358 = VECTOR('',#143359,1.); +#143359 = DIRECTION('',(-1.,0.,0.)); +#143360 = ORIENTED_EDGE('',*,*,#143361,.T.); +#143361 = EDGE_CURVE('',#143354,#143362,#143364,.T.); +#143362 = VERTEX_POINT('',#143363); +#143363 = CARTESIAN_POINT('',(190.272982,-112.957177,1.585)); +#143364 = LINE('',#143365,#143366); +#143365 = CARTESIAN_POINT('',(190.341498,-112.922919,1.585)); +#143366 = VECTOR('',#143367,1.); +#143367 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#143368 = ORIENTED_EDGE('',*,*,#143369,.T.); +#143369 = EDGE_CURVE('',#143362,#143370,#143372,.T.); +#143370 = VERTEX_POINT('',#143371); +#143371 = CARTESIAN_POINT('',(190.222604,-113.005517,1.585)); +#143372 = LINE('',#143373,#143374); +#143373 = CARTESIAN_POINT('',(190.272982,-112.957177,1.585)); +#143374 = VECTOR('',#143375,1.); +#143375 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#143376 = ORIENTED_EDGE('',*,*,#143377,.T.); +#143377 = EDGE_CURVE('',#143370,#143378,#143380,.T.); +#143378 = VERTEX_POINT('',#143379); +#143379 = CARTESIAN_POINT('',(190.127903,-112.890124,1.585)); +#143380 = CIRCLE('',#143381,7.499996838526E-02); +#143381 = AXIS2_PLACEMENT_3D('',#143382,#143383,#143384); +#143382 = CARTESIAN_POINT('',(190.180936,-112.9431569724,1.585)); +#143383 = DIRECTION('',(0.,0.,-1.)); +#143384 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#143385 = ORIENTED_EDGE('',*,*,#143386,.T.); +#143386 = EDGE_CURVE('',#143378,#143236,#143387,.T.); +#143387 = LINE('',#143388,#143389); +#143388 = CARTESIAN_POINT('',(190.127903,-112.890124,1.585)); +#143389 = VECTOR('',#143390,1.); +#143390 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#143391 = PLANE('',#143392); +#143392 = AXIS2_PLACEMENT_3D('',#143393,#143394,#143395); +#143393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143394 = DIRECTION('',(0.,0.,1.)); +#143395 = DIRECTION('',(1.,0.,-0.)); +#143396 = SHELL_BASED_SURFACE_MODEL('',(#143397)); +#143397 = OPEN_SHELL('',(#143398)); +#143398 = ADVANCED_FACE('',(#143399),#143584,.T.); +#143399 = FACE_BOUND('',#143400,.F.); +#143400 = EDGE_LOOP('',(#143401,#143412,#143420,#143429,#143437,#143446, + #143454,#143463,#143471,#143479,#143487,#143496,#143504,#143513, + #143521,#143530,#143538,#143546,#143554,#143562,#143570,#143578)); +#143401 = ORIENTED_EDGE('',*,*,#143402,.T.); +#143402 = EDGE_CURVE('',#143403,#143405,#143407,.T.); +#143403 = VERTEX_POINT('',#143404); +#143404 = CARTESIAN_POINT('',(185.334269,-112.830381,1.585)); +#143405 = VERTEX_POINT('',#143406); +#143406 = CARTESIAN_POINT('',(185.794032,-112.833178,1.585)); +#143407 = CIRCLE('',#143408,0.46078517582); +#143408 = AXIS2_PLACEMENT_3D('',#143409,#143410,#143411); +#143409 = CARTESIAN_POINT('',(185.56172110897,-113.2311159702,1.585)); +#143410 = DIRECTION('',(0.,0.,-1.)); +#143411 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#143412 = ORIENTED_EDGE('',*,*,#143413,.T.); +#143413 = EDGE_CURVE('',#143405,#143414,#143416,.T.); +#143414 = VERTEX_POINT('',#143415); +#143415 = CARTESIAN_POINT('',(185.862343,-112.901489,1.585)); +#143416 = LINE('',#143417,#143418); +#143417 = CARTESIAN_POINT('',(185.794032,-112.833178,1.585)); +#143418 = VECTOR('',#143419,1.); +#143419 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#143420 = ORIENTED_EDGE('',*,*,#143421,.T.); +#143421 = EDGE_CURVE('',#143414,#143422,#143424,.T.); +#143422 = VERTEX_POINT('',#143423); +#143423 = CARTESIAN_POINT('',(185.74695,-112.99619,1.585)); +#143424 = CIRCLE('',#143425,7.500003178657E-02); +#143425 = AXIS2_PLACEMENT_3D('',#143426,#143427,#143428); +#143426 = CARTESIAN_POINT('',(185.79998256212,-112.9431565,1.585)); +#143427 = DIRECTION('',(0.,0.,-1.)); +#143428 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#143429 = ORIENTED_EDGE('',*,*,#143430,.T.); +#143430 = EDGE_CURVE('',#143422,#143431,#143433,.T.); +#143431 = VERTEX_POINT('',#143432); +#143432 = CARTESIAN_POINT('',(185.71185,-112.96109,1.585)); +#143433 = LINE('',#143434,#143435); +#143434 = CARTESIAN_POINT('',(185.74695,-112.99619,1.585)); +#143435 = VECTOR('',#143436,1.); +#143436 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#143437 = ORIENTED_EDGE('',*,*,#143438,.T.); +#143438 = EDGE_CURVE('',#143431,#143439,#143441,.T.); +#143439 = VERTEX_POINT('',#143440); +#143440 = CARTESIAN_POINT('',(185.411926,-112.96109,1.585)); +#143441 = CIRCLE('',#143442,0.299308637371); +#143442 = AXIS2_PLACEMENT_3D('',#143443,#143444,#143445); +#143443 = CARTESIAN_POINT('',(185.561888,-113.220121,1.585)); +#143444 = DIRECTION('',(0.,0.,1.)); +#143445 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#143446 = ORIENTED_EDGE('',*,*,#143447,.T.); +#143447 = EDGE_CURVE('',#143439,#143448,#143450,.T.); +#143448 = VERTEX_POINT('',#143449); +#143449 = CARTESIAN_POINT('',(185.337813,-113.035203,1.585)); +#143450 = LINE('',#143451,#143452); +#143451 = CARTESIAN_POINT('',(185.411926,-112.96109,1.585)); +#143452 = VECTOR('',#143453,1.); +#143453 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#143454 = ORIENTED_EDGE('',*,*,#143455,.T.); +#143455 = EDGE_CURVE('',#143448,#143456,#143458,.T.); +#143456 = VERTEX_POINT('',#143457); +#143457 = CARTESIAN_POINT('',(185.255936,-113.410113,1.585)); +#143458 = CIRCLE('',#143459,0.611712714363); +#143459 = AXIS2_PLACEMENT_3D('',#143460,#143461,#143462); +#143460 = CARTESIAN_POINT('',(185.86434127521,-113.3465876822,1.585)); +#143461 = DIRECTION('',(0.,0.,1.)); +#143462 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#143463 = ORIENTED_EDGE('',*,*,#143464,.T.); +#143464 = EDGE_CURVE('',#143456,#143465,#143467,.T.); +#143465 = VERTEX_POINT('',#143466); +#143466 = CARTESIAN_POINT('',(185.299319,-113.583647,1.585)); +#143467 = LINE('',#143468,#143469); +#143468 = CARTESIAN_POINT('',(185.255936,-113.410113,1.585)); +#143469 = VECTOR('',#143470,1.); +#143470 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#143471 = ORIENTED_EDGE('',*,*,#143472,.T.); +#143472 = EDGE_CURVE('',#143465,#143473,#143475,.T.); +#143473 = VERTEX_POINT('',#143474); +#143474 = CARTESIAN_POINT('',(185.337813,-113.660634,1.585)); +#143475 = LINE('',#143476,#143477); +#143476 = CARTESIAN_POINT('',(185.299319,-113.583647,1.585)); +#143477 = VECTOR('',#143478,1.); +#143478 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#143479 = ORIENTED_EDGE('',*,*,#143480,.T.); +#143480 = EDGE_CURVE('',#143473,#143481,#143483,.T.); +#143481 = VERTEX_POINT('',#143482); +#143482 = CARTESIAN_POINT('',(185.411926,-113.734748,1.585)); +#143483 = LINE('',#143484,#143485); +#143484 = CARTESIAN_POINT('',(185.337813,-113.660634,1.585)); +#143485 = VECTOR('',#143486,1.); +#143486 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#143487 = ORIENTED_EDGE('',*,*,#143488,.T.); +#143488 = EDGE_CURVE('',#143481,#143489,#143491,.T.); +#143489 = VERTEX_POINT('',#143490); +#143490 = CARTESIAN_POINT('',(185.71185,-113.734747,1.585)); +#143491 = CIRCLE('',#143492,0.299305962385); +#143492 = AXIS2_PLACEMENT_3D('',#143493,#143494,#143495); +#143493 = CARTESIAN_POINT('',(185.56188713635,-113.4757195909,1.585)); +#143494 = DIRECTION('',(0.,0.,1.)); +#143495 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#143496 = ORIENTED_EDGE('',*,*,#143497,.T.); +#143497 = EDGE_CURVE('',#143489,#143498,#143500,.T.); +#143498 = VERTEX_POINT('',#143499); +#143499 = CARTESIAN_POINT('',(185.758315,-113.69032,1.585)); +#143500 = LINE('',#143501,#143502); +#143501 = CARTESIAN_POINT('',(185.71185,-113.734747,1.585)); +#143502 = VECTOR('',#143503,1.); +#143503 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#143504 = ORIENTED_EDGE('',*,*,#143505,.T.); +#143505 = EDGE_CURVE('',#143498,#143506,#143508,.T.); +#143506 = VERTEX_POINT('',#143507); +#143507 = CARTESIAN_POINT('',(185.853016,-113.805713,1.585)); +#143508 = CIRCLE('',#143509,7.499993690112E-02); +#143509 = AXIS2_PLACEMENT_3D('',#143510,#143511,#143512); +#143510 = CARTESIAN_POINT('',(185.7999832483,-113.7526798237,1.585)); +#143511 = DIRECTION('',(0.,0.,-1.)); +#143512 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#143513 = ORIENTED_EDGE('',*,*,#143514,.T.); +#143514 = EDGE_CURVE('',#143506,#143515,#143517,.T.); +#143515 = VERTEX_POINT('',#143516); +#143516 = CARTESIAN_POINT('',(185.789506,-113.865457,1.585)); +#143517 = LINE('',#143518,#143519); +#143518 = CARTESIAN_POINT('',(185.853016,-113.805713,1.585)); +#143519 = VECTOR('',#143520,1.); +#143520 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#143521 = ORIENTED_EDGE('',*,*,#143522,.T.); +#143522 = EDGE_CURVE('',#143515,#143523,#143525,.T.); +#143523 = VERTEX_POINT('',#143524); +#143524 = CARTESIAN_POINT('',(185.329744,-113.862661,1.585)); +#143525 = CIRCLE('',#143526,0.461067828848); +#143526 = AXIS2_PLACEMENT_3D('',#143527,#143528,#143529); +#143527 = CARTESIAN_POINT('',(185.56205551268,-113.4643961335,1.585)); +#143528 = DIRECTION('',(-0.,0.,-1.)); +#143529 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#143530 = ORIENTED_EDGE('',*,*,#143531,.T.); +#143531 = EDGE_CURVE('',#143523,#143532,#143534,.T.); +#143532 = VERTEX_POINT('',#143533); +#143533 = CARTESIAN_POINT('',(185.213055,-113.744898,1.585)); +#143534 = LINE('',#143535,#143536); +#143535 = CARTESIAN_POINT('',(185.329744,-113.862661,1.585)); +#143536 = VECTOR('',#143537,1.); +#143537 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#143538 = ORIENTED_EDGE('',*,*,#143539,.T.); +#143539 = EDGE_CURVE('',#143532,#143540,#143542,.T.); +#143540 = VERTEX_POINT('',#143541); +#143541 = CARTESIAN_POINT('',(185.155794,-113.628013,1.585)); +#143542 = LINE('',#143543,#143544); +#143543 = CARTESIAN_POINT('',(185.213055,-113.744898,1.585)); +#143544 = VECTOR('',#143545,1.); +#143545 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#143546 = ORIENTED_EDGE('',*,*,#143547,.T.); +#143547 = EDGE_CURVE('',#143540,#143548,#143550,.T.); +#143548 = VERTEX_POINT('',#143549); +#143549 = CARTESIAN_POINT('',(185.105936,-113.419347,1.585)); +#143550 = LINE('',#143551,#143552); +#143551 = CARTESIAN_POINT('',(185.155794,-113.628013,1.585)); +#143552 = VECTOR('',#143553,1.); +#143553 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#143554 = ORIENTED_EDGE('',*,*,#143555,.T.); +#143555 = EDGE_CURVE('',#143548,#143556,#143558,.T.); +#143556 = VERTEX_POINT('',#143557); +#143557 = CARTESIAN_POINT('',(185.108175,-113.2583,1.585)); +#143558 = LINE('',#143559,#143560); +#143559 = CARTESIAN_POINT('',(185.105936,-113.419347,1.585)); +#143560 = VECTOR('',#143561,1.); +#143561 = DIRECTION('',(1.39014303055E-02,0.999903370449,0.)); +#143562 = ORIENTED_EDGE('',*,*,#143563,.T.); +#143563 = EDGE_CURVE('',#143556,#143564,#143566,.T.); +#143564 = VERTEX_POINT('',#143565); +#143565 = CARTESIAN_POINT('',(185.161473,-113.052473,1.585)); +#143566 = LINE('',#143567,#143568); +#143567 = CARTESIAN_POINT('',(185.108175,-113.2583,1.585)); +#143568 = VECTOR('',#143569,1.); +#143569 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#143570 = ORIENTED_EDGE('',*,*,#143571,.T.); +#143571 = EDGE_CURVE('',#143564,#143572,#143574,.T.); +#143572 = VERTEX_POINT('',#143573); +#143573 = CARTESIAN_POINT('',(185.218422,-112.943492,1.585)); +#143574 = LINE('',#143575,#143576); +#143575 = CARTESIAN_POINT('',(185.161473,-113.052473,1.585)); +#143576 = VECTOR('',#143577,1.); +#143577 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#143578 = ORIENTED_EDGE('',*,*,#143579,.T.); +#143579 = EDGE_CURVE('',#143572,#143403,#143580,.T.); +#143580 = LINE('',#143581,#143582); +#143581 = CARTESIAN_POINT('',(185.218422,-112.943492,1.585)); +#143582 = VECTOR('',#143583,1.); +#143583 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#143584 = PLANE('',#143585); +#143585 = AXIS2_PLACEMENT_3D('',#143586,#143587,#143588); +#143586 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143587 = DIRECTION('',(0.,0.,1.)); +#143588 = DIRECTION('',(1.,0.,-0.)); +#143589 = SHELL_BASED_SURFACE_MODEL('',(#143590)); +#143590 = OPEN_SHELL('',(#143591)); +#143591 = ADVANCED_FACE('',(#143592),#143736,.T.); +#143592 = FACE_BOUND('',#143593,.F.); +#143593 = EDGE_LOOP('',(#143594,#143605,#143613,#143622,#143630,#143638, + #143647,#143655,#143664,#143672,#143680,#143689,#143697,#143705, + #143714,#143722,#143730)); +#143594 = ORIENTED_EDGE('',*,*,#143595,.T.); +#143595 = EDGE_CURVE('',#143596,#143598,#143600,.T.); +#143596 = VERTEX_POINT('',#143597); +#143597 = CARTESIAN_POINT('',(186.236333,-113.165753,1.585)); +#143598 = VERTEX_POINT('',#143599); +#143599 = CARTESIAN_POINT('',(186.70311,-113.169621,1.585)); +#143600 = CIRCLE('',#143601,0.399448428941); +#143601 = AXIS2_PLACEMENT_3D('',#143602,#143603,#143604); +#143602 = CARTESIAN_POINT('',(186.46703533486,-113.4918442143,1.585)); +#143603 = DIRECTION('',(0.,0.,-1.)); +#143604 = DIRECTION('',(-0.577552239904,0.816353728589,0.)); +#143605 = ORIENTED_EDGE('',*,*,#143606,.T.); +#143606 = EDGE_CURVE('',#143598,#143607,#143609,.T.); +#143607 = VERTEX_POINT('',#143608); +#143608 = CARTESIAN_POINT('',(186.722283,-113.191729,1.585)); +#143609 = LINE('',#143610,#143611); +#143610 = CARTESIAN_POINT('',(186.70311,-113.169621,1.585)); +#143611 = VECTOR('',#143612,1.); +#143612 = DIRECTION('',(0.655178986934,-0.755473689205,0.)); +#143613 = ORIENTED_EDGE('',*,*,#143614,.T.); +#143614 = EDGE_CURVE('',#143607,#143615,#143617,.T.); +#143615 = VERTEX_POINT('',#143616); +#143616 = CARTESIAN_POINT('',(186.623585,-113.295953,1.585)); +#143617 = CIRCLE('',#143618,7.499986582492E-02); +#143618 = AXIS2_PLACEMENT_3D('',#143619,#143620,#143621); +#143619 = CARTESIAN_POINT('',(186.6571258973,-113.2288710495,1.585)); +#143620 = DIRECTION('',(0.,0.,-1.)); +#143621 = DIRECTION('',(0.868762923549,0.495228212713,0.)); +#143622 = ORIENTED_EDGE('',*,*,#143623,.T.); +#143623 = EDGE_CURVE('',#143615,#143624,#143626,.T.); +#143624 = VERTEX_POINT('',#143625); +#143625 = CARTESIAN_POINT('',(186.544183,-113.256252,1.585)); +#143626 = LINE('',#143627,#143628); +#143627 = CARTESIAN_POINT('',(186.623585,-113.295953,1.585)); +#143628 = VECTOR('',#143629,1.); +#143629 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#143630 = ORIENTED_EDGE('',*,*,#143631,.T.); +#143631 = EDGE_CURVE('',#143624,#143632,#143634,.T.); +#143632 = VERTEX_POINT('',#143633); +#143633 = CARTESIAN_POINT('',(186.389117,-113.256252,1.585)); +#143634 = LINE('',#143635,#143636); +#143635 = CARTESIAN_POINT('',(186.544183,-113.256252,1.585)); +#143636 = VECTOR('',#143637,1.); +#143637 = DIRECTION('',(-1.,0.,0.)); +#143638 = ORIENTED_EDGE('',*,*,#143639,.T.); +#143639 = EDGE_CURVE('',#143632,#143640,#143642,.T.); +#143640 = VERTEX_POINT('',#143641); +#143641 = CARTESIAN_POINT('',(186.255936,-113.389433,1.585)); +#143642 = CIRCLE('',#143643,0.18686440374); +#143643 = AXIS2_PLACEMENT_3D('',#143644,#143645,#143646); +#143644 = CARTESIAN_POINT('',(186.436653,-113.436969,1.585)); +#143645 = DIRECTION('',(0.,0.,1.)); +#143646 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#143647 = ORIENTED_EDGE('',*,*,#143648,.T.); +#143648 = EDGE_CURVE('',#143640,#143649,#143651,.T.); +#143649 = VERTEX_POINT('',#143650); +#143650 = CARTESIAN_POINT('',(186.255936,-113.639737,1.585)); +#143651 = LINE('',#143652,#143653); +#143652 = CARTESIAN_POINT('',(186.255936,-113.389433,1.585)); +#143653 = VECTOR('',#143654,1.); +#143654 = DIRECTION('',(0.,-1.,0.)); +#143655 = ORIENTED_EDGE('',*,*,#143656,.T.); +#143656 = EDGE_CURVE('',#143649,#143657,#143659,.T.); +#143657 = VERTEX_POINT('',#143658); +#143658 = CARTESIAN_POINT('',(186.389117,-113.772919,1.585)); +#143659 = CIRCLE('',#143660,0.186867373533); +#143660 = AXIS2_PLACEMENT_3D('',#143661,#143662,#143663); +#143661 = CARTESIAN_POINT('',(186.43665571388,-113.592199643,1.585)); +#143662 = DIRECTION('',(0.,0.,1.)); +#143663 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#143664 = ORIENTED_EDGE('',*,*,#143665,.T.); +#143665 = EDGE_CURVE('',#143657,#143666,#143668,.T.); +#143666 = VERTEX_POINT('',#143667); +#143667 = CARTESIAN_POINT('',(186.544183,-113.772919,1.585)); +#143668 = LINE('',#143669,#143670); +#143669 = CARTESIAN_POINT('',(186.389117,-113.772919,1.585)); +#143670 = VECTOR('',#143671,1.); +#143671 = DIRECTION('',(1.,0.,0.)); +#143672 = ORIENTED_EDGE('',*,*,#143673,.T.); +#143673 = EDGE_CURVE('',#143666,#143674,#143676,.T.); +#143674 = VERTEX_POINT('',#143675); +#143675 = CARTESIAN_POINT('',(186.637316,-113.727963,1.585)); +#143676 = LINE('',#143677,#143678); +#143677 = CARTESIAN_POINT('',(186.544183,-113.772919,1.585)); +#143678 = VECTOR('',#143679,1.); +#143679 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#143680 = ORIENTED_EDGE('',*,*,#143681,.T.); +#143681 = EDGE_CURVE('',#143674,#143682,#143684,.T.); +#143682 = VERTEX_POINT('',#143683); +#143683 = CARTESIAN_POINT('',(186.690667,-113.867382,1.585)); +#143684 = CIRCLE('',#143685,7.500029440468E-02); +#143685 = AXIS2_PLACEMENT_3D('',#143686,#143687,#143688); +#143686 = CARTESIAN_POINT('',(186.65712535132,-113.800299946,1.585)); +#143687 = DIRECTION('',(0.,0.,-1.)); +#143688 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#143689 = ORIENTED_EDGE('',*,*,#143690,.T.); +#143690 = EDGE_CURVE('',#143682,#143691,#143693,.T.); +#143691 = VERTEX_POINT('',#143692); +#143692 = CARTESIAN_POINT('',(186.57652,-113.921478,1.585)); +#143693 = LINE('',#143694,#143695); +#143694 = CARTESIAN_POINT('',(186.690667,-113.867382,1.585)); +#143695 = VECTOR('',#143696,1.); +#143696 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#143697 = ORIENTED_EDGE('',*,*,#143698,.T.); +#143698 = EDGE_CURVE('',#143691,#143699,#143701,.T.); +#143699 = VERTEX_POINT('',#143700); +#143700 = CARTESIAN_POINT('',(186.351602,-113.920256,1.585)); +#143701 = LINE('',#143702,#143703); +#143702 = CARTESIAN_POINT('',(186.57652,-113.921478,1.585)); +#143703 = VECTOR('',#143704,1.); +#143704 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#143705 = ORIENTED_EDGE('',*,*,#143706,.T.); +#143706 = EDGE_CURVE('',#143699,#143707,#143709,.T.); +#143707 = VERTEX_POINT('',#143708); +#143708 = CARTESIAN_POINT('',(186.107377,-113.672074,1.585)); +#143709 = CIRCLE('',#143710,0.348628446662); +#143710 = AXIS2_PLACEMENT_3D('',#143711,#143712,#143713); +#143711 = CARTESIAN_POINT('',(186.44477761322,-113.5843094284,1.585)); +#143712 = DIRECTION('',(0.,0.,-1.)); +#143713 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#143714 = ORIENTED_EDGE('',*,*,#143715,.T.); +#143715 = EDGE_CURVE('',#143707,#143716,#143718,.T.); +#143716 = VERTEX_POINT('',#143717); +#143717 = CARTESIAN_POINT('',(186.108599,-113.351919,1.585)); +#143718 = LINE('',#143719,#143720); +#143719 = CARTESIAN_POINT('',(186.107377,-113.672074,1.585)); +#143720 = VECTOR('',#143721,1.); +#143721 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#143722 = ORIENTED_EDGE('',*,*,#143723,.T.); +#143723 = EDGE_CURVE('',#143716,#143724,#143726,.T.); +#143724 = VERTEX_POINT('',#143725); +#143725 = CARTESIAN_POINT('',(186.170803,-113.229206,1.585)); +#143726 = LINE('',#143727,#143728); +#143727 = CARTESIAN_POINT('',(186.108599,-113.351919,1.585)); +#143728 = VECTOR('',#143729,1.); +#143729 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#143730 = ORIENTED_EDGE('',*,*,#143731,.T.); +#143731 = EDGE_CURVE('',#143724,#143596,#143732,.T.); +#143732 = LINE('',#143733,#143734); +#143733 = CARTESIAN_POINT('',(186.170803,-113.229206,1.585)); +#143734 = VECTOR('',#143735,1.); +#143735 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#143736 = PLANE('',#143737); +#143737 = AXIS2_PLACEMENT_3D('',#143738,#143739,#143740); +#143738 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143739 = DIRECTION('',(0.,0.,1.)); +#143740 = DIRECTION('',(1.,0.,-0.)); +#143741 = SHELL_BASED_SURFACE_MODEL('',(#143742)); +#143742 = OPEN_SHELL('',(#143743)); +#143743 = ADVANCED_FACE('',(#143744,#143821),#143898,.T.); +#143744 = FACE_BOUND('',#143745,.F.); +#143745 = EDGE_LOOP('',(#143746,#143757,#143765,#143773,#143782,#143790, + #143799,#143807,#143815)); +#143746 = ORIENTED_EDGE('',*,*,#143747,.T.); +#143747 = EDGE_CURVE('',#143748,#143750,#143752,.T.); +#143748 = VERTEX_POINT('',#143749); +#143749 = CARTESIAN_POINT('',(187.093476,-113.165753,1.585)); +#143750 = VERTEX_POINT('',#143751); +#143751 = CARTESIAN_POINT('',(187.577386,-113.236649,1.585)); +#143752 = CIRCLE('',#143753,0.34461174713); +#143753 = AXIS2_PLACEMENT_3D('',#143754,#143755,#143756); +#143754 = CARTESIAN_POINT('',(187.30023294377,-113.4414499757,1.585)); +#143755 = DIRECTION('',(0.,0.,-1.)); +#143756 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#143757 = ORIENTED_EDGE('',*,*,#143758,.T.); +#143758 = EDGE_CURVE('',#143750,#143759,#143761,.T.); +#143759 = VERTEX_POINT('',#143760); +#143760 = CARTESIAN_POINT('',(187.635447,-113.357096,1.585)); +#143761 = LINE('',#143762,#143763); +#143762 = CARTESIAN_POINT('',(187.577386,-113.236649,1.585)); +#143763 = VECTOR('',#143764,1.); +#143764 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#143765 = ORIENTED_EDGE('',*,*,#143766,.T.); +#143766 = EDGE_CURVE('',#143759,#143767,#143769,.T.); +#143767 = VERTEX_POINT('',#143768); +#143768 = CARTESIAN_POINT('',(187.634225,-113.677252,1.585)); +#143769 = LINE('',#143770,#143771); +#143770 = CARTESIAN_POINT('',(187.635447,-113.357096,1.585)); +#143771 = VECTOR('',#143772,1.); +#143772 = DIRECTION('',(-3.816861463376E-03,-0.999992715758,0.)); +#143773 = ORIENTED_EDGE('',*,*,#143774,.T.); +#143774 = EDGE_CURVE('',#143767,#143775,#143777,.T.); +#143775 = VERTEX_POINT('',#143776); +#143776 = CARTESIAN_POINT('',(187.386044,-113.921478,1.585)); +#143777 = CIRCLE('',#143778,0.348635327447); +#143778 = AXIS2_PLACEMENT_3D('',#143779,#143780,#143781); +#143779 = CARTESIAN_POINT('',(187.29827248129,-113.5840720841,1.585)); +#143780 = DIRECTION('',(0.,0.,-1.)); +#143781 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#143782 = ORIENTED_EDGE('',*,*,#143783,.T.); +#143783 = EDGE_CURVE('',#143775,#143784,#143786,.T.); +#143784 = VERTEX_POINT('',#143785); +#143785 = CARTESIAN_POINT('',(187.208745,-113.920256,1.585)); +#143786 = LINE('',#143787,#143788); +#143787 = CARTESIAN_POINT('',(187.386044,-113.921478,1.585)); +#143788 = VECTOR('',#143789,1.); +#143789 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#143790 = ORIENTED_EDGE('',*,*,#143791,.T.); +#143791 = EDGE_CURVE('',#143784,#143792,#143794,.T.); +#143792 = VERTEX_POINT('',#143793); +#143793 = CARTESIAN_POINT('',(186.96452,-113.672074,1.585)); +#143794 = CIRCLE('',#143795,0.348628446661); +#143795 = AXIS2_PLACEMENT_3D('',#143796,#143797,#143798); +#143796 = CARTESIAN_POINT('',(187.30192061322,-113.5843094284,1.585)); +#143797 = DIRECTION('',(0.,0.,-1.)); +#143798 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#143799 = ORIENTED_EDGE('',*,*,#143800,.T.); +#143800 = EDGE_CURVE('',#143792,#143801,#143803,.T.); +#143801 = VERTEX_POINT('',#143802); +#143802 = CARTESIAN_POINT('',(186.965742,-113.351919,1.585)); +#143803 = LINE('',#143804,#143805); +#143804 = CARTESIAN_POINT('',(186.96452,-113.672074,1.585)); +#143805 = VECTOR('',#143806,1.); +#143806 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#143807 = ORIENTED_EDGE('',*,*,#143808,.T.); +#143808 = EDGE_CURVE('',#143801,#143809,#143811,.T.); +#143809 = VERTEX_POINT('',#143810); +#143810 = CARTESIAN_POINT('',(187.027946,-113.229206,1.585)); +#143811 = LINE('',#143812,#143813); +#143812 = CARTESIAN_POINT('',(186.965742,-113.351919,1.585)); +#143813 = VECTOR('',#143814,1.); +#143814 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#143815 = ORIENTED_EDGE('',*,*,#143816,.T.); +#143816 = EDGE_CURVE('',#143809,#143748,#143817,.T.); +#143817 = LINE('',#143818,#143819); +#143818 = CARTESIAN_POINT('',(187.027946,-113.229206,1.585)); +#143819 = VECTOR('',#143820,1.); +#143820 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#143821 = FACE_BOUND('',#143822,.F.); +#143822 = EDGE_LOOP('',(#143823,#143834,#143842,#143850,#143859,#143867, + #143876,#143884,#143892)); +#143823 = ORIENTED_EDGE('',*,*,#143824,.T.); +#143824 = EDGE_CURVE('',#143825,#143827,#143829,.T.); +#143825 = VERTEX_POINT('',#143826); +#143826 = CARTESIAN_POINT('',(187.422223,-113.29051,1.585)); +#143827 = VERTEX_POINT('',#143828); +#143828 = CARTESIAN_POINT('',(187.147337,-113.320917,1.585)); +#143829 = CIRCLE('',#143830,0.198386215365); +#143830 = AXIS2_PLACEMENT_3D('',#143831,#143832,#143833); +#143831 = CARTESIAN_POINT('',(187.30041995783,-113.4471021753,1.585)); +#143832 = DIRECTION('',(0.,0.,1.)); +#143833 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#143834 = ORIENTED_EDGE('',*,*,#143835,.T.); +#143835 = EDGE_CURVE('',#143827,#143836,#143838,.T.); +#143836 = VERTEX_POINT('',#143837); +#143837 = CARTESIAN_POINT('',(187.113079,-113.389433,1.585)); +#143838 = LINE('',#143839,#143840); +#143839 = CARTESIAN_POINT('',(187.147337,-113.320917,1.585)); +#143840 = VECTOR('',#143841,1.); +#143841 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#143842 = ORIENTED_EDGE('',*,*,#143843,.T.); +#143843 = EDGE_CURVE('',#143836,#143844,#143846,.T.); +#143844 = VERTEX_POINT('',#143845); +#143845 = CARTESIAN_POINT('',(187.113079,-113.639737,1.585)); +#143846 = LINE('',#143847,#143848); +#143847 = CARTESIAN_POINT('',(187.113079,-113.389433,1.585)); +#143848 = VECTOR('',#143849,1.); +#143849 = DIRECTION('',(0.,-1.,0.)); +#143850 = ORIENTED_EDGE('',*,*,#143851,.T.); +#143851 = EDGE_CURVE('',#143844,#143852,#143854,.T.); +#143852 = VERTEX_POINT('',#143853); +#143853 = CARTESIAN_POINT('',(187.24626,-113.772919,1.585)); +#143854 = CIRCLE('',#143855,0.186867373533); +#143855 = AXIS2_PLACEMENT_3D('',#143856,#143857,#143858); +#143856 = CARTESIAN_POINT('',(187.29379871388,-113.592199643,1.585)); +#143857 = DIRECTION('',(0.,0.,1.)); +#143858 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#143859 = ORIENTED_EDGE('',*,*,#143860,.T.); +#143860 = EDGE_CURVE('',#143852,#143861,#143863,.T.); +#143861 = VERTEX_POINT('',#143862); +#143862 = CARTESIAN_POINT('',(187.353707,-113.772919,1.585)); +#143863 = LINE('',#143864,#143865); +#143864 = CARTESIAN_POINT('',(187.24626,-113.772919,1.585)); +#143865 = VECTOR('',#143866,1.); +#143866 = DIRECTION('',(1.,0.,0.)); +#143867 = ORIENTED_EDGE('',*,*,#143868,.T.); +#143868 = EDGE_CURVE('',#143861,#143869,#143871,.T.); +#143869 = VERTEX_POINT('',#143870); +#143870 = CARTESIAN_POINT('',(187.486888,-113.639737,1.585)); +#143871 = CIRCLE('',#143872,0.186867760544); +#143872 = AXIS2_PLACEMENT_3D('',#143873,#143874,#143875); +#143873 = CARTESIAN_POINT('',(187.30616796928,-113.5921993262,1.585)); +#143874 = DIRECTION('',(0.,0.,1.)); +#143875 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#143876 = ORIENTED_EDGE('',*,*,#143877,.T.); +#143877 = EDGE_CURVE('',#143869,#143878,#143880,.T.); +#143878 = VERTEX_POINT('',#143879); +#143879 = CARTESIAN_POINT('',(187.486888,-113.389433,1.585)); +#143880 = LINE('',#143881,#143882); +#143881 = CARTESIAN_POINT('',(187.486888,-113.639737,1.585)); +#143882 = VECTOR('',#143883,1.); +#143883 = DIRECTION('',(0.,1.,0.)); +#143884 = ORIENTED_EDGE('',*,*,#143885,.T.); +#143885 = EDGE_CURVE('',#143878,#143886,#143888,.T.); +#143886 = VERTEX_POINT('',#143887); +#143887 = CARTESIAN_POINT('',(187.45263,-113.320917,1.585)); +#143888 = LINE('',#143889,#143890); +#143889 = CARTESIAN_POINT('',(187.486888,-113.389433,1.585)); +#143890 = VECTOR('',#143891,1.); +#143891 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#143892 = ORIENTED_EDGE('',*,*,#143893,.T.); +#143893 = EDGE_CURVE('',#143886,#143825,#143894,.T.); +#143894 = LINE('',#143895,#143896); +#143895 = CARTESIAN_POINT('',(187.45263,-113.320917,1.585)); +#143896 = VECTOR('',#143897,1.); +#143897 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#143898 = PLANE('',#143899); +#143899 = AXIS2_PLACEMENT_3D('',#143900,#143901,#143902); +#143900 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143901 = DIRECTION('',(0.,0.,1.)); +#143902 = DIRECTION('',(1.,0.,-0.)); +#143903 = SHELL_BASED_SURFACE_MODEL('',(#143904)); +#143904 = OPEN_SHELL('',(#143905)); +#143905 = ADVANCED_FACE('',(#143906),#144123,.T.); +#143906 = FACE_BOUND('',#143907,.F.); +#143907 = EDGE_LOOP('',(#143908,#143919,#143927,#143935,#143943,#143952, + #143960,#143969,#143977,#143986,#143994,#144002,#144011,#144019, + #144027,#144036,#144044,#144052,#144060,#144068,#144076,#144084, + #144092,#144101,#144109,#144117)); +#143908 = ORIENTED_EDGE('',*,*,#143909,.T.); +#143909 = EDGE_CURVE('',#143910,#143912,#143914,.T.); +#143910 = VERTEX_POINT('',#143911); +#143911 = CARTESIAN_POINT('',(187.948792,-113.118892,1.585)); +#143912 = VERTEX_POINT('',#143913); +#143913 = CARTESIAN_POINT('',(188.051529,-113.138293,1.585)); +#143914 = CIRCLE('',#143915,7.440760172324E-02); +#143915 = AXIS2_PLACEMENT_3D('',#143916,#143917,#143918); +#143916 = CARTESIAN_POINT('',(187.99033506572,-113.180622583,1.585)); +#143917 = DIRECTION('',(0.,0.,-1.)); +#143918 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#143919 = ORIENTED_EDGE('',*,*,#143920,.T.); +#143920 = EDGE_CURVE('',#143912,#143921,#143923,.T.); +#143921 = VERTEX_POINT('',#143922); +#143922 = CARTESIAN_POINT('',(188.118685,-113.107693,1.585)); +#143923 = LINE('',#143924,#143925); +#143924 = CARTESIAN_POINT('',(188.051529,-113.138293,1.585)); +#143925 = VECTOR('',#143926,1.); +#143926 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#143927 = ORIENTED_EDGE('',*,*,#143928,.T.); +#143928 = EDGE_CURVE('',#143921,#143929,#143931,.T.); +#143929 = VERTEX_POINT('',#143930); +#143930 = CARTESIAN_POINT('',(188.290806,-113.107693,1.585)); +#143931 = LINE('',#143932,#143933); +#143932 = CARTESIAN_POINT('',(188.118685,-113.107693,1.585)); +#143933 = VECTOR('',#143934,1.); +#143934 = DIRECTION('',(1.,0.,0.)); +#143935 = ORIENTED_EDGE('',*,*,#143936,.T.); +#143936 = EDGE_CURVE('',#143929,#143937,#143939,.T.); +#143937 = VERTEX_POINT('',#143938); +#143938 = CARTESIAN_POINT('',(188.420666,-113.169621,1.585)); +#143939 = LINE('',#143940,#143941); +#143940 = CARTESIAN_POINT('',(188.290806,-113.107693,1.585)); +#143941 = VECTOR('',#143942,1.); +#143942 = DIRECTION('',(0.902617807283,-0.430442904431,0.)); +#143943 = ORIENTED_EDGE('',*,*,#143944,.T.); +#143944 = EDGE_CURVE('',#143937,#143945,#143947,.T.); +#143945 = VERTEX_POINT('',#143946); +#143946 = CARTESIAN_POINT('',(188.845967,-113.169621,1.585)); +#143947 = CIRCLE('',#143948,0.347106732746); +#143948 = AXIS2_PLACEMENT_3D('',#143949,#143950,#143951); +#143949 = CARTESIAN_POINT('',(188.6333165,-113.443961753,1.585)); +#143950 = DIRECTION('',(0.,0.,-1.)); +#143951 = DIRECTION('',(-0.612637209073,0.790364251506,0.)); +#143952 = ORIENTED_EDGE('',*,*,#143953,.T.); +#143953 = EDGE_CURVE('',#143945,#143954,#143956,.T.); +#143954 = VERTEX_POINT('',#143955); +#143955 = CARTESIAN_POINT('',(188.867066,-113.19533,1.585)); +#143956 = LINE('',#143957,#143958); +#143957 = CARTESIAN_POINT('',(188.845967,-113.169621,1.585)); +#143958 = VECTOR('',#143959,1.); +#143959 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#143960 = ORIENTED_EDGE('',*,*,#143961,.T.); +#143961 = EDGE_CURVE('',#143954,#143962,#143964,.T.); +#143962 = VERTEX_POINT('',#143963); +#143963 = CARTESIAN_POINT('',(188.909963,-113.889587,1.585)); +#143964 = CIRCLE('',#143965,0.780466291444); +#143965 = AXIS2_PLACEMENT_3D('',#143966,#143967,#143968); +#143966 = CARTESIAN_POINT('',(188.1911532213,-113.5855473082,1.585)); +#143967 = DIRECTION('',(0.,0.,-1.)); +#143968 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#143969 = ORIENTED_EDGE('',*,*,#143970,.T.); +#143970 = EDGE_CURVE('',#143962,#143971,#143973,.T.); +#143971 = VERTEX_POINT('',#143972); +#143972 = CARTESIAN_POINT('',(188.889271,-113.910279,1.585)); +#143973 = LINE('',#143974,#143975); +#143974 = CARTESIAN_POINT('',(188.909963,-113.889587,1.585)); +#143975 = VECTOR('',#143976,1.); +#143976 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#143977 = ORIENTED_EDGE('',*,*,#143978,.T.); +#143978 = EDGE_CURVE('',#143971,#143979,#143981,.T.); +#143979 = VERTEX_POINT('',#143980); +#143980 = CARTESIAN_POINT('',(188.772603,-113.847919,1.585)); +#143981 = CIRCLE('',#143982,7.499979580332E-02); +#143982 = AXIS2_PLACEMENT_3D('',#143983,#143984,#143985); +#143983 = CARTESIAN_POINT('',(188.8476027958,-113.8479193164,1.585)); +#143984 = DIRECTION('',(-0.,0.,-1.)); +#143985 = DIRECTION('',(0.555577568593,-0.831464710783,-0.)); +#143986 = ORIENTED_EDGE('',*,*,#143987,.T.); +#143987 = EDGE_CURVE('',#143979,#143988,#143990,.T.); +#143988 = VERTEX_POINT('',#143989); +#143989 = CARTESIAN_POINT('',(188.772603,-113.341814,1.585)); +#143990 = LINE('',#143991,#143992); +#143991 = CARTESIAN_POINT('',(188.772603,-113.847919,1.585)); +#143992 = VECTOR('',#143993,1.); +#143993 = DIRECTION('',(0.,1.,0.)); +#143994 = ORIENTED_EDGE('',*,*,#143995,.T.); +#143995 = EDGE_CURVE('',#143988,#143996,#143998,.T.); +#143996 = VERTEX_POINT('',#143997); +#143997 = CARTESIAN_POINT('',(188.744082,-113.284772,1.585)); +#143998 = LINE('',#143999,#144000); +#143999 = CARTESIAN_POINT('',(188.772603,-113.341814,1.585)); +#144000 = VECTOR('',#144001,1.); +#144001 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#144002 = ORIENTED_EDGE('',*,*,#144003,.T.); +#144003 = EDGE_CURVE('',#143996,#144004,#144006,.T.); +#144004 = VERTEX_POINT('',#144005); +#144005 = CARTESIAN_POINT('',(188.522551,-113.284772,1.585)); +#144006 = CIRCLE('',#144007,0.186653372204); +#144007 = AXIS2_PLACEMENT_3D('',#144008,#144009,#144010); +#144008 = CARTESIAN_POINT('',(188.6333165,-113.4350067674,1.585)); +#144009 = DIRECTION('',(0.,0.,1.)); +#144010 = DIRECTION('',(0.593428871348,0.804886435872,-0.)); +#144011 = ORIENTED_EDGE('',*,*,#144012,.T.); +#144012 = EDGE_CURVE('',#144004,#144013,#144015,.T.); +#144013 = VERTEX_POINT('',#144014); +#144014 = CARTESIAN_POINT('',(188.494031,-113.341814,1.585)); +#144015 = LINE('',#144016,#144017); +#144016 = CARTESIAN_POINT('',(188.522551,-113.284772,1.585)); +#144017 = VECTOR('',#144018,1.); +#144018 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#144019 = ORIENTED_EDGE('',*,*,#144020,.T.); +#144020 = EDGE_CURVE('',#144013,#144021,#144023,.T.); +#144021 = VERTEX_POINT('',#144022); +#144022 = CARTESIAN_POINT('',(188.49259,-113.862551,1.585)); +#144023 = LINE('',#144024,#144025); +#144024 = CARTESIAN_POINT('',(188.494031,-113.341814,1.585)); +#144025 = VECTOR('',#144026,1.); +#144026 = DIRECTION('',(-2.767221232121E-03,-0.999996171236,0.)); +#144027 = ORIENTED_EDGE('',*,*,#144028,.T.); +#144028 = EDGE_CURVE('',#144021,#144029,#144031,.T.); +#144029 = VERTEX_POINT('',#144030); +#144030 = CARTESIAN_POINT('',(188.344031,-113.847919,1.585)); +#144031 = CIRCLE('',#144032,7.500006711464E-02); +#144032 = AXIS2_PLACEMENT_3D('',#144033,#144034,#144035); +#144033 = CARTESIAN_POINT('',(188.41903106711,-113.8479190671,1.585)); +#144034 = DIRECTION('',(-0.,0.,-1.)); +#144035 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#144036 = ORIENTED_EDGE('',*,*,#144037,.T.); +#144037 = EDGE_CURVE('',#144029,#144038,#144040,.T.); +#144038 = VERTEX_POINT('',#144039); +#144039 = CARTESIAN_POINT('',(188.344031,-113.341814,1.585)); +#144040 = LINE('',#144041,#144042); +#144041 = CARTESIAN_POINT('',(188.344031,-113.847919,1.585)); +#144042 = VECTOR('',#144043,1.); +#144043 = DIRECTION('',(0.,1.,0.)); +#144044 = ORIENTED_EDGE('',*,*,#144045,.T.); +#144045 = EDGE_CURVE('',#144038,#144046,#144048,.T.); +#144046 = VERTEX_POINT('',#144047); +#144047 = CARTESIAN_POINT('',(188.31551,-113.284772,1.585)); +#144048 = LINE('',#144049,#144050); +#144049 = CARTESIAN_POINT('',(188.344031,-113.341814,1.585)); +#144050 = VECTOR('',#144051,1.); +#144051 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#144052 = ORIENTED_EDGE('',*,*,#144053,.T.); +#144053 = EDGE_CURVE('',#144046,#144054,#144056,.T.); +#144054 = VERTEX_POINT('',#144055); +#144055 = CARTESIAN_POINT('',(188.258469,-113.256252,1.585)); +#144056 = LINE('',#144057,#144058); +#144057 = CARTESIAN_POINT('',(188.31551,-113.284772,1.585)); +#144058 = VECTOR('',#144059,1.); +#144059 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#144060 = ORIENTED_EDGE('',*,*,#144061,.T.); +#144061 = EDGE_CURVE('',#144054,#144062,#144064,.T.); +#144062 = VERTEX_POINT('',#144063); +#144063 = CARTESIAN_POINT('',(188.151022,-113.256252,1.585)); +#144064 = LINE('',#144065,#144066); +#144065 = CARTESIAN_POINT('',(188.258469,-113.256252,1.585)); +#144066 = VECTOR('',#144067,1.); +#144067 = DIRECTION('',(-1.,0.,0.)); +#144068 = ORIENTED_EDGE('',*,*,#144069,.T.); +#144069 = EDGE_CURVE('',#144062,#144070,#144072,.T.); +#144070 = VERTEX_POINT('',#144071); +#144071 = CARTESIAN_POINT('',(188.082506,-113.29051,1.585)); +#144072 = LINE('',#144073,#144074); +#144073 = CARTESIAN_POINT('',(188.151022,-113.256252,1.585)); +#144074 = VECTOR('',#144075,1.); +#144075 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#144076 = ORIENTED_EDGE('',*,*,#144077,.T.); +#144077 = EDGE_CURVE('',#144070,#144078,#144080,.T.); +#144078 = VERTEX_POINT('',#144079); +#144079 = CARTESIAN_POINT('',(188.06546,-113.307556,1.585)); +#144080 = LINE('',#144081,#144082); +#144081 = CARTESIAN_POINT('',(188.082506,-113.29051,1.585)); +#144082 = VECTOR('',#144083,1.); +#144083 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#144084 = ORIENTED_EDGE('',*,*,#144085,.T.); +#144085 = EDGE_CURVE('',#144078,#144086,#144088,.T.); +#144086 = VERTEX_POINT('',#144087); +#144087 = CARTESIAN_POINT('',(188.064019,-113.862551,1.585)); +#144088 = LINE('',#144089,#144090); +#144089 = CARTESIAN_POINT('',(188.06546,-113.307556,1.585)); +#144090 = VECTOR('',#144091,1.); +#144091 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#144092 = ORIENTED_EDGE('',*,*,#144093,.T.); +#144093 = EDGE_CURVE('',#144086,#144094,#144096,.T.); +#144094 = VERTEX_POINT('',#144095); +#144095 = CARTESIAN_POINT('',(187.91546,-113.847919,1.585)); +#144096 = CIRCLE('',#144097,7.500006711464E-02); +#144097 = AXIS2_PLACEMENT_3D('',#144098,#144099,#144100); +#144098 = CARTESIAN_POINT('',(187.99046006711,-113.8479190671,1.585)); +#144099 = DIRECTION('',(-0.,0.,-1.)); +#144100 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#144101 = ORIENTED_EDGE('',*,*,#144102,.T.); +#144102 = EDGE_CURVE('',#144094,#144103,#144105,.T.); +#144103 = VERTEX_POINT('',#144104); +#144104 = CARTESIAN_POINT('',(187.916901,-113.16662,1.585)); +#144105 = LINE('',#144106,#144107); +#144106 = CARTESIAN_POINT('',(187.91546,-113.847919,1.585)); +#144107 = VECTOR('',#144108,1.); +#144108 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#144109 = ORIENTED_EDGE('',*,*,#144110,.T.); +#144110 = EDGE_CURVE('',#144103,#144111,#144113,.T.); +#144111 = VERTEX_POINT('',#144112); +#144112 = CARTESIAN_POINT('',(187.9281,-113.139584,1.585)); +#144113 = LINE('',#144114,#144115); +#144114 = CARTESIAN_POINT('',(187.916901,-113.16662,1.585)); +#144115 = VECTOR('',#144116,1.); +#144116 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#144117 = ORIENTED_EDGE('',*,*,#144118,.T.); +#144118 = EDGE_CURVE('',#144111,#143910,#144119,.T.); +#144119 = LINE('',#144120,#144121); +#144120 = CARTESIAN_POINT('',(187.9281,-113.139584,1.585)); +#144121 = VECTOR('',#144122,1.); +#144122 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#144123 = PLANE('',#144124); +#144124 = AXIS2_PLACEMENT_3D('',#144125,#144126,#144127); +#144125 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144126 = DIRECTION('',(0.,0.,1.)); +#144127 = DIRECTION('',(1.,0.,-0.)); +#144128 = SHELL_BASED_SURFACE_MODEL('',(#144129)); +#144129 = OPEN_SHELL('',(#144130)); +#144130 = ADVANCED_FACE('',(#144131),#144167,.T.); +#144131 = FACE_BOUND('',#144132,.F.); +#144132 = EDGE_LOOP('',(#144133,#144144,#144152,#144161)); +#144133 = ORIENTED_EDGE('',*,*,#144134,.T.); +#144134 = EDGE_CURVE('',#144135,#144137,#144139,.T.); +#144135 = VERTEX_POINT('',#144136); +#144136 = CARTESIAN_POINT('',(92.004392,-112.9056,1.585)); +#144137 = VERTEX_POINT('',#144138); +#144138 = CARTESIAN_POINT('',(92.004392,-112.7856,1.585)); +#144139 = CIRCLE('',#144140,6.000000000043E-02); +#144140 = AXIS2_PLACEMENT_3D('',#144141,#144142,#144143); +#144141 = CARTESIAN_POINT('',(92.004391774412,-112.8456,1.585)); +#144142 = DIRECTION('',(0.,0.,-1.)); +#144143 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144144 = ORIENTED_EDGE('',*,*,#144145,.T.); +#144145 = EDGE_CURVE('',#144137,#144146,#144148,.T.); +#144146 = VERTEX_POINT('',#144147); +#144147 = CARTESIAN_POINT('',(92.478908,-112.7856,1.585)); +#144148 = LINE('',#144149,#144150); +#144149 = CARTESIAN_POINT('',(92.004392,-112.7856,1.585)); +#144150 = VECTOR('',#144151,1.); +#144151 = DIRECTION('',(1.,0.,0.)); +#144152 = ORIENTED_EDGE('',*,*,#144153,.T.); +#144153 = EDGE_CURVE('',#144146,#144154,#144156,.T.); +#144154 = VERTEX_POINT('',#144155); +#144155 = CARTESIAN_POINT('',(92.478908,-112.9056,1.585)); +#144156 = CIRCLE('',#144157,6.000000000043E-02); +#144157 = AXIS2_PLACEMENT_3D('',#144158,#144159,#144160); +#144158 = CARTESIAN_POINT('',(92.478908225588,-112.8456,1.585)); +#144159 = DIRECTION('',(0.,0.,-1.)); +#144160 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144161 = ORIENTED_EDGE('',*,*,#144162,.T.); +#144162 = EDGE_CURVE('',#144154,#144135,#144163,.T.); +#144163 = LINE('',#144164,#144165); +#144164 = CARTESIAN_POINT('',(92.478908,-112.9056,1.585)); +#144165 = VECTOR('',#144166,1.); +#144166 = DIRECTION('',(-1.,0.,0.)); +#144167 = PLANE('',#144168); +#144168 = AXIS2_PLACEMENT_3D('',#144169,#144170,#144171); +#144169 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144170 = DIRECTION('',(0.,0.,1.)); +#144171 = DIRECTION('',(1.,0.,-0.)); +#144172 = SHELL_BASED_SURFACE_MODEL('',(#144173)); +#144173 = OPEN_SHELL('',(#144174)); +#144174 = ADVANCED_FACE('',(#144175),#144211,.T.); +#144175 = FACE_BOUND('',#144176,.F.); +#144176 = EDGE_LOOP('',(#144177,#144188,#144196,#144205)); +#144177 = ORIENTED_EDGE('',*,*,#144178,.T.); +#144178 = EDGE_CURVE('',#144179,#144181,#144183,.T.); +#144179 = VERTEX_POINT('',#144180); +#144180 = CARTESIAN_POINT('',(95.179392,-112.9056,1.585)); +#144181 = VERTEX_POINT('',#144182); +#144182 = CARTESIAN_POINT('',(95.179392,-112.7856,1.585)); +#144183 = CIRCLE('',#144184,6.000000000043E-02); +#144184 = AXIS2_PLACEMENT_3D('',#144185,#144186,#144187); +#144185 = CARTESIAN_POINT('',(95.179391774412,-112.8456,1.585)); +#144186 = DIRECTION('',(0.,0.,-1.)); +#144187 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144188 = ORIENTED_EDGE('',*,*,#144189,.T.); +#144189 = EDGE_CURVE('',#144181,#144190,#144192,.T.); +#144190 = VERTEX_POINT('',#144191); +#144191 = CARTESIAN_POINT('',(95.653908,-112.7856,1.585)); +#144192 = LINE('',#144193,#144194); +#144193 = CARTESIAN_POINT('',(95.179392,-112.7856,1.585)); +#144194 = VECTOR('',#144195,1.); +#144195 = DIRECTION('',(1.,0.,0.)); +#144196 = ORIENTED_EDGE('',*,*,#144197,.T.); +#144197 = EDGE_CURVE('',#144190,#144198,#144200,.T.); +#144198 = VERTEX_POINT('',#144199); +#144199 = CARTESIAN_POINT('',(95.653908,-112.9056,1.585)); +#144200 = CIRCLE('',#144201,6.000000000043E-02); +#144201 = AXIS2_PLACEMENT_3D('',#144202,#144203,#144204); +#144202 = CARTESIAN_POINT('',(95.653908225588,-112.8456,1.585)); +#144203 = DIRECTION('',(0.,0.,-1.)); +#144204 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144205 = ORIENTED_EDGE('',*,*,#144206,.T.); +#144206 = EDGE_CURVE('',#144198,#144179,#144207,.T.); +#144207 = LINE('',#144208,#144209); +#144208 = CARTESIAN_POINT('',(95.653908,-112.9056,1.585)); +#144209 = VECTOR('',#144210,1.); +#144210 = DIRECTION('',(-1.,0.,0.)); +#144211 = PLANE('',#144212); +#144212 = AXIS2_PLACEMENT_3D('',#144213,#144214,#144215); +#144213 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144214 = DIRECTION('',(0.,0.,1.)); +#144215 = DIRECTION('',(1.,0.,-0.)); +#144216 = SHELL_BASED_SURFACE_MODEL('',(#144217)); +#144217 = OPEN_SHELL('',(#144218)); +#144218 = ADVANCED_FACE('',(#144219),#144255,.T.); +#144219 = FACE_BOUND('',#144220,.F.); +#144220 = EDGE_LOOP('',(#144221,#144232,#144240,#144249)); +#144221 = ORIENTED_EDGE('',*,*,#144222,.T.); +#144222 = EDGE_CURVE('',#144223,#144225,#144227,.T.); +#144223 = VERTEX_POINT('',#144224); +#144224 = CARTESIAN_POINT('',(98.504392,-112.9056,1.585)); +#144225 = VERTEX_POINT('',#144226); +#144226 = CARTESIAN_POINT('',(98.504392,-112.7856,1.585)); +#144227 = CIRCLE('',#144228,6.000000000043E-02); +#144228 = AXIS2_PLACEMENT_3D('',#144229,#144230,#144231); +#144229 = CARTESIAN_POINT('',(98.504391774412,-112.8456,1.585)); +#144230 = DIRECTION('',(0.,0.,-1.)); +#144231 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144232 = ORIENTED_EDGE('',*,*,#144233,.T.); +#144233 = EDGE_CURVE('',#144225,#144234,#144236,.T.); +#144234 = VERTEX_POINT('',#144235); +#144235 = CARTESIAN_POINT('',(98.978908,-112.7856,1.585)); +#144236 = LINE('',#144237,#144238); +#144237 = CARTESIAN_POINT('',(98.504392,-112.7856,1.585)); +#144238 = VECTOR('',#144239,1.); +#144239 = DIRECTION('',(1.,0.,0.)); +#144240 = ORIENTED_EDGE('',*,*,#144241,.T.); +#144241 = EDGE_CURVE('',#144234,#144242,#144244,.T.); +#144242 = VERTEX_POINT('',#144243); +#144243 = CARTESIAN_POINT('',(98.978908,-112.9056,1.585)); +#144244 = CIRCLE('',#144245,6.000000000043E-02); +#144245 = AXIS2_PLACEMENT_3D('',#144246,#144247,#144248); +#144246 = CARTESIAN_POINT('',(98.978908225588,-112.8456,1.585)); +#144247 = DIRECTION('',(0.,0.,-1.)); +#144248 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144249 = ORIENTED_EDGE('',*,*,#144250,.T.); +#144250 = EDGE_CURVE('',#144242,#144223,#144251,.T.); +#144251 = LINE('',#144252,#144253); +#144252 = CARTESIAN_POINT('',(98.978908,-112.9056,1.585)); +#144253 = VECTOR('',#144254,1.); +#144254 = DIRECTION('',(-1.,0.,0.)); +#144255 = PLANE('',#144256); +#144256 = AXIS2_PLACEMENT_3D('',#144257,#144258,#144259); +#144257 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144258 = DIRECTION('',(0.,0.,1.)); +#144259 = DIRECTION('',(1.,0.,-0.)); +#144260 = SHELL_BASED_SURFACE_MODEL('',(#144261)); +#144261 = OPEN_SHELL('',(#144262)); +#144262 = ADVANCED_FACE('',(#144263),#144299,.T.); +#144263 = FACE_BOUND('',#144264,.F.); +#144264 = EDGE_LOOP('',(#144265,#144276,#144284,#144293)); +#144265 = ORIENTED_EDGE('',*,*,#144266,.T.); +#144266 = EDGE_CURVE('',#144267,#144269,#144271,.T.); +#144267 = VERTEX_POINT('',#144268); +#144268 = CARTESIAN_POINT('',(102.679392,-112.9056,1.585)); +#144269 = VERTEX_POINT('',#144270); +#144270 = CARTESIAN_POINT('',(102.679392,-112.7856,1.585)); +#144271 = CIRCLE('',#144272,6.000000000043E-02); +#144272 = AXIS2_PLACEMENT_3D('',#144273,#144274,#144275); +#144273 = CARTESIAN_POINT('',(102.67939177441,-112.8456,1.585)); +#144274 = DIRECTION('',(0.,0.,-1.)); +#144275 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144276 = ORIENTED_EDGE('',*,*,#144277,.T.); +#144277 = EDGE_CURVE('',#144269,#144278,#144280,.T.); +#144278 = VERTEX_POINT('',#144279); +#144279 = CARTESIAN_POINT('',(103.153908,-112.7856,1.585)); +#144280 = LINE('',#144281,#144282); +#144281 = CARTESIAN_POINT('',(102.679392,-112.7856,1.585)); +#144282 = VECTOR('',#144283,1.); +#144283 = DIRECTION('',(1.,0.,0.)); +#144284 = ORIENTED_EDGE('',*,*,#144285,.T.); +#144285 = EDGE_CURVE('',#144278,#144286,#144288,.T.); +#144286 = VERTEX_POINT('',#144287); +#144287 = CARTESIAN_POINT('',(103.153908,-112.9056,1.585)); +#144288 = CIRCLE('',#144289,6.000000000043E-02); +#144289 = AXIS2_PLACEMENT_3D('',#144290,#144291,#144292); +#144290 = CARTESIAN_POINT('',(103.15390822558,-112.8456,1.585)); +#144291 = DIRECTION('',(0.,0.,-1.)); +#144292 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144293 = ORIENTED_EDGE('',*,*,#144294,.T.); +#144294 = EDGE_CURVE('',#144286,#144267,#144295,.T.); +#144295 = LINE('',#144296,#144297); +#144296 = CARTESIAN_POINT('',(103.153908,-112.9056,1.585)); +#144297 = VECTOR('',#144298,1.); +#144298 = DIRECTION('',(-1.,0.,0.)); +#144299 = PLANE('',#144300); +#144300 = AXIS2_PLACEMENT_3D('',#144301,#144302,#144303); +#144301 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144302 = DIRECTION('',(0.,0.,1.)); +#144303 = DIRECTION('',(1.,0.,-0.)); +#144304 = SHELL_BASED_SURFACE_MODEL('',(#144305)); +#144305 = OPEN_SHELL('',(#144306)); +#144306 = ADVANCED_FACE('',(#144307),#144343,.T.); +#144307 = FACE_BOUND('',#144308,.F.); +#144308 = EDGE_LOOP('',(#144309,#144320,#144328,#144337)); +#144309 = ORIENTED_EDGE('',*,*,#144310,.T.); +#144310 = EDGE_CURVE('',#144311,#144313,#144315,.T.); +#144311 = VERTEX_POINT('',#144312); +#144312 = CARTESIAN_POINT('',(106.679392,-112.9056,1.585)); +#144313 = VERTEX_POINT('',#144314); +#144314 = CARTESIAN_POINT('',(106.679392,-112.7856,1.585)); +#144315 = CIRCLE('',#144316,6.000000000043E-02); +#144316 = AXIS2_PLACEMENT_3D('',#144317,#144318,#144319); +#144317 = CARTESIAN_POINT('',(106.67939177441,-112.8456,1.585)); +#144318 = DIRECTION('',(0.,0.,-1.)); +#144319 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144320 = ORIENTED_EDGE('',*,*,#144321,.T.); +#144321 = EDGE_CURVE('',#144313,#144322,#144324,.T.); +#144322 = VERTEX_POINT('',#144323); +#144323 = CARTESIAN_POINT('',(107.153908,-112.7856,1.585)); +#144324 = LINE('',#144325,#144326); +#144325 = CARTESIAN_POINT('',(106.679392,-112.7856,1.585)); +#144326 = VECTOR('',#144327,1.); +#144327 = DIRECTION('',(1.,0.,0.)); +#144328 = ORIENTED_EDGE('',*,*,#144329,.T.); +#144329 = EDGE_CURVE('',#144322,#144330,#144332,.T.); +#144330 = VERTEX_POINT('',#144331); +#144331 = CARTESIAN_POINT('',(107.153908,-112.9056,1.585)); +#144332 = CIRCLE('',#144333,6.000000000043E-02); +#144333 = AXIS2_PLACEMENT_3D('',#144334,#144335,#144336); +#144334 = CARTESIAN_POINT('',(107.15390822558,-112.8456,1.585)); +#144335 = DIRECTION('',(0.,0.,-1.)); +#144336 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144337 = ORIENTED_EDGE('',*,*,#144338,.T.); +#144338 = EDGE_CURVE('',#144330,#144311,#144339,.T.); +#144339 = LINE('',#144340,#144341); +#144340 = CARTESIAN_POINT('',(107.153908,-112.9056,1.585)); +#144341 = VECTOR('',#144342,1.); +#144342 = DIRECTION('',(-1.,0.,0.)); +#144343 = PLANE('',#144344); +#144344 = AXIS2_PLACEMENT_3D('',#144345,#144346,#144347); +#144345 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144346 = DIRECTION('',(0.,0.,1.)); +#144347 = DIRECTION('',(1.,0.,-0.)); +#144348 = SHELL_BASED_SURFACE_MODEL('',(#144349)); +#144349 = OPEN_SHELL('',(#144350)); +#144350 = ADVANCED_FACE('',(#144351),#144387,.T.); +#144351 = FACE_BOUND('',#144352,.F.); +#144352 = EDGE_LOOP('',(#144353,#144364,#144372,#144381)); +#144353 = ORIENTED_EDGE('',*,*,#144354,.T.); +#144354 = EDGE_CURVE('',#144355,#144357,#144359,.T.); +#144355 = VERTEX_POINT('',#144356); +#144356 = CARTESIAN_POINT('',(110.679392,-112.9056,1.585)); +#144357 = VERTEX_POINT('',#144358); +#144358 = CARTESIAN_POINT('',(110.679392,-112.7856,1.585)); +#144359 = CIRCLE('',#144360,6.000000000043E-02); +#144360 = AXIS2_PLACEMENT_3D('',#144361,#144362,#144363); +#144361 = CARTESIAN_POINT('',(110.67939177441,-112.8456,1.585)); +#144362 = DIRECTION('',(0.,0.,-1.)); +#144363 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144364 = ORIENTED_EDGE('',*,*,#144365,.T.); +#144365 = EDGE_CURVE('',#144357,#144366,#144368,.T.); +#144366 = VERTEX_POINT('',#144367); +#144367 = CARTESIAN_POINT('',(111.153908,-112.7856,1.585)); +#144368 = LINE('',#144369,#144370); +#144369 = CARTESIAN_POINT('',(110.679392,-112.7856,1.585)); +#144370 = VECTOR('',#144371,1.); +#144371 = DIRECTION('',(1.,0.,0.)); +#144372 = ORIENTED_EDGE('',*,*,#144373,.T.); +#144373 = EDGE_CURVE('',#144366,#144374,#144376,.T.); +#144374 = VERTEX_POINT('',#144375); +#144375 = CARTESIAN_POINT('',(111.153908,-112.9056,1.585)); +#144376 = CIRCLE('',#144377,6.000000000043E-02); +#144377 = AXIS2_PLACEMENT_3D('',#144378,#144379,#144380); +#144378 = CARTESIAN_POINT('',(111.15390822558,-112.8456,1.585)); +#144379 = DIRECTION('',(0.,0.,-1.)); +#144380 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144381 = ORIENTED_EDGE('',*,*,#144382,.T.); +#144382 = EDGE_CURVE('',#144374,#144355,#144383,.T.); +#144383 = LINE('',#144384,#144385); +#144384 = CARTESIAN_POINT('',(111.153908,-112.9056,1.585)); +#144385 = VECTOR('',#144386,1.); +#144386 = DIRECTION('',(-1.,0.,0.)); +#144387 = PLANE('',#144388); +#144388 = AXIS2_PLACEMENT_3D('',#144389,#144390,#144391); +#144389 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144390 = DIRECTION('',(0.,0.,1.)); +#144391 = DIRECTION('',(1.,0.,-0.)); +#144392 = SHELL_BASED_SURFACE_MODEL('',(#144393)); +#144393 = OPEN_SHELL('',(#144394)); +#144394 = ADVANCED_FACE('',(#144395),#144431,.T.); +#144395 = FACE_BOUND('',#144396,.F.); +#144396 = EDGE_LOOP('',(#144397,#144408,#144416,#144425)); +#144397 = ORIENTED_EDGE('',*,*,#144398,.T.); +#144398 = EDGE_CURVE('',#144399,#144401,#144403,.T.); +#144399 = VERTEX_POINT('',#144400); +#144400 = CARTESIAN_POINT('',(114.679392,-112.9056,1.585)); +#144401 = VERTEX_POINT('',#144402); +#144402 = CARTESIAN_POINT('',(114.679392,-112.7856,1.585)); +#144403 = CIRCLE('',#144404,6.000000000043E-02); +#144404 = AXIS2_PLACEMENT_3D('',#144405,#144406,#144407); +#144405 = CARTESIAN_POINT('',(114.67939177441,-112.8456,1.585)); +#144406 = DIRECTION('',(0.,0.,-1.)); +#144407 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144408 = ORIENTED_EDGE('',*,*,#144409,.T.); +#144409 = EDGE_CURVE('',#144401,#144410,#144412,.T.); +#144410 = VERTEX_POINT('',#144411); +#144411 = CARTESIAN_POINT('',(115.153908,-112.7856,1.585)); +#144412 = LINE('',#144413,#144414); +#144413 = CARTESIAN_POINT('',(114.679392,-112.7856,1.585)); +#144414 = VECTOR('',#144415,1.); +#144415 = DIRECTION('',(1.,0.,0.)); +#144416 = ORIENTED_EDGE('',*,*,#144417,.T.); +#144417 = EDGE_CURVE('',#144410,#144418,#144420,.T.); +#144418 = VERTEX_POINT('',#144419); +#144419 = CARTESIAN_POINT('',(115.153908,-112.9056,1.585)); +#144420 = CIRCLE('',#144421,6.000000000043E-02); +#144421 = AXIS2_PLACEMENT_3D('',#144422,#144423,#144424); +#144422 = CARTESIAN_POINT('',(115.15390822558,-112.8456,1.585)); +#144423 = DIRECTION('',(0.,0.,-1.)); +#144424 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144425 = ORIENTED_EDGE('',*,*,#144426,.T.); +#144426 = EDGE_CURVE('',#144418,#144399,#144427,.T.); +#144427 = LINE('',#144428,#144429); +#144428 = CARTESIAN_POINT('',(115.153908,-112.9056,1.585)); +#144429 = VECTOR('',#144430,1.); +#144430 = DIRECTION('',(-1.,0.,0.)); +#144431 = PLANE('',#144432); +#144432 = AXIS2_PLACEMENT_3D('',#144433,#144434,#144435); +#144433 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144434 = DIRECTION('',(0.,0.,1.)); +#144435 = DIRECTION('',(1.,0.,-0.)); +#144436 = SHELL_BASED_SURFACE_MODEL('',(#144437)); +#144437 = OPEN_SHELL('',(#144438)); +#144438 = ADVANCED_FACE('',(#144439),#144475,.T.); +#144439 = FACE_BOUND('',#144440,.F.); +#144440 = EDGE_LOOP('',(#144441,#144452,#144460,#144469)); +#144441 = ORIENTED_EDGE('',*,*,#144442,.T.); +#144442 = EDGE_CURVE('',#144443,#144445,#144447,.T.); +#144443 = VERTEX_POINT('',#144444); +#144444 = CARTESIAN_POINT('',(124.679392,-112.9056,1.585)); +#144445 = VERTEX_POINT('',#144446); +#144446 = CARTESIAN_POINT('',(124.679392,-112.7856,1.585)); +#144447 = CIRCLE('',#144448,6.000000000043E-02); +#144448 = AXIS2_PLACEMENT_3D('',#144449,#144450,#144451); +#144449 = CARTESIAN_POINT('',(124.67939177441,-112.8456,1.585)); +#144450 = DIRECTION('',(0.,0.,-1.)); +#144451 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144452 = ORIENTED_EDGE('',*,*,#144453,.T.); +#144453 = EDGE_CURVE('',#144445,#144454,#144456,.T.); +#144454 = VERTEX_POINT('',#144455); +#144455 = CARTESIAN_POINT('',(125.153908,-112.7856,1.585)); +#144456 = LINE('',#144457,#144458); +#144457 = CARTESIAN_POINT('',(124.679392,-112.7856,1.585)); +#144458 = VECTOR('',#144459,1.); +#144459 = DIRECTION('',(1.,0.,0.)); +#144460 = ORIENTED_EDGE('',*,*,#144461,.T.); +#144461 = EDGE_CURVE('',#144454,#144462,#144464,.T.); +#144462 = VERTEX_POINT('',#144463); +#144463 = CARTESIAN_POINT('',(125.153908,-112.9056,1.585)); +#144464 = CIRCLE('',#144465,6.000000000043E-02); +#144465 = AXIS2_PLACEMENT_3D('',#144466,#144467,#144468); +#144466 = CARTESIAN_POINT('',(125.15390822558,-112.8456,1.585)); +#144467 = DIRECTION('',(0.,0.,-1.)); +#144468 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144469 = ORIENTED_EDGE('',*,*,#144470,.T.); +#144470 = EDGE_CURVE('',#144462,#144443,#144471,.T.); +#144471 = LINE('',#144472,#144473); +#144472 = CARTESIAN_POINT('',(125.153908,-112.9056,1.585)); +#144473 = VECTOR('',#144474,1.); +#144474 = DIRECTION('',(-1.,0.,0.)); +#144475 = PLANE('',#144476); +#144476 = AXIS2_PLACEMENT_3D('',#144477,#144478,#144479); +#144477 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144478 = DIRECTION('',(0.,0.,1.)); +#144479 = DIRECTION('',(1.,0.,-0.)); +#144480 = SHELL_BASED_SURFACE_MODEL('',(#144481)); +#144481 = OPEN_SHELL('',(#144482)); +#144482 = ADVANCED_FACE('',(#144483),#144519,.T.); +#144483 = FACE_BOUND('',#144484,.F.); +#144484 = EDGE_LOOP('',(#144485,#144496,#144504,#144513)); +#144485 = ORIENTED_EDGE('',*,*,#144486,.T.); +#144486 = EDGE_CURVE('',#144487,#144489,#144491,.T.); +#144487 = VERTEX_POINT('',#144488); +#144488 = CARTESIAN_POINT('',(128.679392,-112.9056,1.585)); +#144489 = VERTEX_POINT('',#144490); +#144490 = CARTESIAN_POINT('',(128.679392,-112.7856,1.585)); +#144491 = CIRCLE('',#144492,6.000000000043E-02); +#144492 = AXIS2_PLACEMENT_3D('',#144493,#144494,#144495); +#144493 = CARTESIAN_POINT('',(128.67939177441,-112.8456,1.585)); +#144494 = DIRECTION('',(0.,0.,-1.)); +#144495 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#144496 = ORIENTED_EDGE('',*,*,#144497,.T.); +#144497 = EDGE_CURVE('',#144489,#144498,#144500,.T.); +#144498 = VERTEX_POINT('',#144499); +#144499 = CARTESIAN_POINT('',(129.153908,-112.7856,1.585)); +#144500 = LINE('',#144501,#144502); +#144501 = CARTESIAN_POINT('',(128.679392,-112.7856,1.585)); +#144502 = VECTOR('',#144503,1.); +#144503 = DIRECTION('',(1.,0.,0.)); +#144504 = ORIENTED_EDGE('',*,*,#144505,.T.); +#144505 = EDGE_CURVE('',#144498,#144506,#144508,.T.); +#144506 = VERTEX_POINT('',#144507); +#144507 = CARTESIAN_POINT('',(129.153908,-112.9056,1.585)); +#144508 = CIRCLE('',#144509,6.000000000042E-02); +#144509 = AXIS2_PLACEMENT_3D('',#144510,#144511,#144512); +#144510 = CARTESIAN_POINT('',(129.15390822558,-112.8456,1.585)); +#144511 = DIRECTION('',(0.,0.,-1.)); +#144512 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#144513 = ORIENTED_EDGE('',*,*,#144514,.T.); +#144514 = EDGE_CURVE('',#144506,#144487,#144515,.T.); +#144515 = LINE('',#144516,#144517); +#144516 = CARTESIAN_POINT('',(129.153908,-112.9056,1.585)); +#144517 = VECTOR('',#144518,1.); +#144518 = DIRECTION('',(-1.,0.,0.)); +#144519 = PLANE('',#144520); +#144520 = AXIS2_PLACEMENT_3D('',#144521,#144522,#144523); +#144521 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144522 = DIRECTION('',(0.,0.,1.)); +#144523 = DIRECTION('',(1.,0.,-0.)); +#144524 = SHELL_BASED_SURFACE_MODEL('',(#144525)); +#144525 = OPEN_SHELL('',(#144526)); +#144526 = ADVANCED_FACE('',(#144527),#144563,.T.); +#144527 = FACE_BOUND('',#144528,.F.); +#144528 = EDGE_LOOP('',(#144529,#144540,#144548,#144557)); +#144529 = ORIENTED_EDGE('',*,*,#144530,.T.); +#144530 = EDGE_CURVE('',#144531,#144533,#144535,.T.); +#144531 = VERTEX_POINT('',#144532); +#144532 = CARTESIAN_POINT('',(118.77607,-112.8931,1.585)); +#144533 = VERTEX_POINT('',#144534); +#144534 = CARTESIAN_POINT('',(118.77607,-112.7731,1.585)); +#144535 = CIRCLE('',#144536,6.000000000043E-02); +#144536 = AXIS2_PLACEMENT_3D('',#144537,#144538,#144539); +#144537 = CARTESIAN_POINT('',(118.77606977441,-112.8331,1.585)); +#144538 = DIRECTION('',(0.,0.,-1.)); +#144539 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#144540 = ORIENTED_EDGE('',*,*,#144541,.T.); +#144541 = EDGE_CURVE('',#144533,#144542,#144544,.T.); +#144542 = VERTEX_POINT('',#144543); +#144543 = CARTESIAN_POINT('',(119.05723,-112.7731,1.585)); +#144544 = LINE('',#144545,#144546); +#144545 = CARTESIAN_POINT('',(118.77607,-112.7731,1.585)); +#144546 = VECTOR('',#144547,1.); +#144547 = DIRECTION('',(1.,0.,0.)); +#144548 = ORIENTED_EDGE('',*,*,#144549,.T.); +#144549 = EDGE_CURVE('',#144542,#144550,#144552,.T.); +#144550 = VERTEX_POINT('',#144551); +#144551 = CARTESIAN_POINT('',(119.05723,-112.8931,1.585)); +#144552 = CIRCLE('',#144553,6.000000000042E-02); +#144553 = AXIS2_PLACEMENT_3D('',#144554,#144555,#144556); +#144554 = CARTESIAN_POINT('',(119.05723022558,-112.8331,1.585)); +#144555 = DIRECTION('',(0.,0.,-1.)); +#144556 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144557 = ORIENTED_EDGE('',*,*,#144558,.T.); +#144558 = EDGE_CURVE('',#144550,#144531,#144559,.T.); +#144559 = LINE('',#144560,#144561); +#144560 = CARTESIAN_POINT('',(119.05723,-112.8931,1.585)); +#144561 = VECTOR('',#144562,1.); +#144562 = DIRECTION('',(-1.,0.,0.)); +#144563 = PLANE('',#144564); +#144564 = AXIS2_PLACEMENT_3D('',#144565,#144566,#144567); +#144565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144566 = DIRECTION('',(0.,0.,1.)); +#144567 = DIRECTION('',(1.,0.,-0.)); +#144568 = SHELL_BASED_SURFACE_MODEL('',(#144569)); +#144569 = OPEN_SHELL('',(#144570)); +#144570 = ADVANCED_FACE('',(#144571),#144607,.T.); +#144571 = FACE_BOUND('',#144572,.F.); +#144572 = EDGE_LOOP('',(#144573,#144584,#144592,#144601)); +#144573 = ORIENTED_EDGE('',*,*,#144574,.T.); +#144574 = EDGE_CURVE('',#144575,#144577,#144579,.T.); +#144575 = VERTEX_POINT('',#144576); +#144576 = CARTESIAN_POINT('',(132.77607,-112.8931,1.585)); +#144577 = VERTEX_POINT('',#144578); +#144578 = CARTESIAN_POINT('',(132.77607,-112.7731,1.585)); +#144579 = CIRCLE('',#144580,6.000000000043E-02); +#144580 = AXIS2_PLACEMENT_3D('',#144581,#144582,#144583); +#144581 = CARTESIAN_POINT('',(132.77606977441,-112.8331,1.585)); +#144582 = DIRECTION('',(0.,0.,-1.)); +#144583 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#144584 = ORIENTED_EDGE('',*,*,#144585,.T.); +#144585 = EDGE_CURVE('',#144577,#144586,#144588,.T.); +#144586 = VERTEX_POINT('',#144587); +#144587 = CARTESIAN_POINT('',(133.05723,-112.7731,1.585)); +#144588 = LINE('',#144589,#144590); +#144589 = CARTESIAN_POINT('',(132.77607,-112.7731,1.585)); +#144590 = VECTOR('',#144591,1.); +#144591 = DIRECTION('',(1.,0.,0.)); +#144592 = ORIENTED_EDGE('',*,*,#144593,.T.); +#144593 = EDGE_CURVE('',#144586,#144594,#144596,.T.); +#144594 = VERTEX_POINT('',#144595); +#144595 = CARTESIAN_POINT('',(133.05723,-112.8931,1.585)); +#144596 = CIRCLE('',#144597,6.000000000043E-02); +#144597 = AXIS2_PLACEMENT_3D('',#144598,#144599,#144600); +#144598 = CARTESIAN_POINT('',(133.05723022558,-112.8331,1.585)); +#144599 = DIRECTION('',(0.,0.,-1.)); +#144600 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#144601 = ORIENTED_EDGE('',*,*,#144602,.T.); +#144602 = EDGE_CURVE('',#144594,#144575,#144603,.T.); +#144603 = LINE('',#144604,#144605); +#144604 = CARTESIAN_POINT('',(133.05723,-112.8931,1.585)); +#144605 = VECTOR('',#144606,1.); +#144606 = DIRECTION('',(-1.,0.,0.)); +#144607 = PLANE('',#144608); +#144608 = AXIS2_PLACEMENT_3D('',#144609,#144610,#144611); +#144609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144610 = DIRECTION('',(0.,0.,1.)); +#144611 = DIRECTION('',(1.,0.,-0.)); +#144612 = SHELL_BASED_SURFACE_MODEL('',(#144613)); +#144613 = OPEN_SHELL('',(#144614)); +#144614 = ADVANCED_FACE('',(#144615),#144651,.T.); +#144615 = FACE_BOUND('',#144616,.F.); +#144616 = EDGE_LOOP('',(#144617,#144628,#144636,#144645)); +#144617 = ORIENTED_EDGE('',*,*,#144618,.T.); +#144618 = EDGE_CURVE('',#144619,#144621,#144623,.T.); +#144619 = VERTEX_POINT('',#144620); +#144620 = CARTESIAN_POINT('',(136.77607,-112.8931,1.585)); +#144621 = VERTEX_POINT('',#144622); +#144622 = CARTESIAN_POINT('',(136.77607,-112.7731,1.585)); +#144623 = CIRCLE('',#144624,6.000000000043E-02); +#144624 = AXIS2_PLACEMENT_3D('',#144625,#144626,#144627); +#144625 = CARTESIAN_POINT('',(136.77606977441,-112.8331,1.585)); +#144626 = DIRECTION('',(0.,0.,-1.)); +#144627 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#144628 = ORIENTED_EDGE('',*,*,#144629,.T.); +#144629 = EDGE_CURVE('',#144621,#144630,#144632,.T.); +#144630 = VERTEX_POINT('',#144631); +#144631 = CARTESIAN_POINT('',(137.05723,-112.7731,1.585)); +#144632 = LINE('',#144633,#144634); +#144633 = CARTESIAN_POINT('',(136.77607,-112.7731,1.585)); +#144634 = VECTOR('',#144635,1.); +#144635 = DIRECTION('',(1.,0.,0.)); +#144636 = ORIENTED_EDGE('',*,*,#144637,.T.); +#144637 = EDGE_CURVE('',#144630,#144638,#144640,.T.); +#144638 = VERTEX_POINT('',#144639); +#144639 = CARTESIAN_POINT('',(137.05723,-112.8931,1.585)); +#144640 = CIRCLE('',#144641,6.000000000043E-02); +#144641 = AXIS2_PLACEMENT_3D('',#144642,#144643,#144644); +#144642 = CARTESIAN_POINT('',(137.05723022558,-112.8331,1.585)); +#144643 = DIRECTION('',(0.,0.,-1.)); +#144644 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#144645 = ORIENTED_EDGE('',*,*,#144646,.T.); +#144646 = EDGE_CURVE('',#144638,#144619,#144647,.T.); +#144647 = LINE('',#144648,#144649); +#144648 = CARTESIAN_POINT('',(137.05723,-112.8931,1.585)); +#144649 = VECTOR('',#144650,1.); +#144650 = DIRECTION('',(-1.,0.,0.)); +#144651 = PLANE('',#144652); +#144652 = AXIS2_PLACEMENT_3D('',#144653,#144654,#144655); +#144653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144654 = DIRECTION('',(0.,0.,1.)); +#144655 = DIRECTION('',(1.,0.,-0.)); +#144656 = SHELL_BASED_SURFACE_MODEL('',(#144657)); +#144657 = OPEN_SHELL('',(#144658)); +#144658 = ADVANCED_FACE('',(#144659),#144695,.T.); +#144659 = FACE_BOUND('',#144660,.F.); +#144660 = EDGE_LOOP('',(#144661,#144672,#144680,#144689)); +#144661 = ORIENTED_EDGE('',*,*,#144662,.T.); +#144662 = EDGE_CURVE('',#144663,#144665,#144667,.T.); +#144663 = VERTEX_POINT('',#144664); +#144664 = CARTESIAN_POINT('',(179.279392,-112.4056,1.585)); +#144665 = VERTEX_POINT('',#144666); +#144666 = CARTESIAN_POINT('',(179.279392,-112.2856,1.585)); +#144667 = CIRCLE('',#144668,6.000000000043E-02); +#144668 = AXIS2_PLACEMENT_3D('',#144669,#144670,#144671); +#144669 = CARTESIAN_POINT('',(179.27939177441,-112.3456,1.585)); +#144670 = DIRECTION('',(0.,0.,-1.)); +#144671 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#144672 = ORIENTED_EDGE('',*,*,#144673,.T.); +#144673 = EDGE_CURVE('',#144665,#144674,#144676,.T.); +#144674 = VERTEX_POINT('',#144675); +#144675 = CARTESIAN_POINT('',(179.753908,-112.2856,1.585)); +#144676 = LINE('',#144677,#144678); +#144677 = CARTESIAN_POINT('',(179.279392,-112.2856,1.585)); +#144678 = VECTOR('',#144679,1.); +#144679 = DIRECTION('',(1.,0.,0.)); +#144680 = ORIENTED_EDGE('',*,*,#144681,.T.); +#144681 = EDGE_CURVE('',#144674,#144682,#144684,.T.); +#144682 = VERTEX_POINT('',#144683); +#144683 = CARTESIAN_POINT('',(179.753908,-112.4056,1.585)); +#144684 = CIRCLE('',#144685,6.000000000042E-02); +#144685 = AXIS2_PLACEMENT_3D('',#144686,#144687,#144688); +#144686 = CARTESIAN_POINT('',(179.75390822558,-112.3456,1.585)); +#144687 = DIRECTION('',(0.,0.,-1.)); +#144688 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#144689 = ORIENTED_EDGE('',*,*,#144690,.T.); +#144690 = EDGE_CURVE('',#144682,#144663,#144691,.T.); +#144691 = LINE('',#144692,#144693); +#144692 = CARTESIAN_POINT('',(179.753908,-112.4056,1.585)); +#144693 = VECTOR('',#144694,1.); +#144694 = DIRECTION('',(-1.,0.,0.)); +#144695 = PLANE('',#144696); +#144696 = AXIS2_PLACEMENT_3D('',#144697,#144698,#144699); +#144697 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144698 = DIRECTION('',(0.,0.,1.)); +#144699 = DIRECTION('',(1.,0.,-0.)); +#144700 = SHELL_BASED_SURFACE_MODEL('',(#144701)); +#144701 = OPEN_SHELL('',(#144702)); +#144702 = ADVANCED_FACE('',(#144703),#144805,.T.); +#144703 = FACE_BOUND('',#144704,.F.); +#144704 = EDGE_LOOP('',(#144705,#144715,#144724,#144732,#144740,#144749, + #144757,#144765,#144774,#144782,#144790,#144799)); +#144705 = ORIENTED_EDGE('',*,*,#144706,.T.); +#144706 = EDGE_CURVE('',#144707,#144709,#144711,.T.); +#144707 = VERTEX_POINT('',#144708); +#144708 = CARTESIAN_POINT('',(84.01279,-110.793532,1.585)); +#144709 = VERTEX_POINT('',#144710); +#144710 = CARTESIAN_POINT('',(85.255533,-109.968502,1.585)); +#144711 = LINE('',#144712,#144713); +#144712 = CARTESIAN_POINT('',(84.01279,-110.793532,1.585)); +#144713 = VECTOR('',#144714,1.); +#144714 = DIRECTION('',(0.833120949421,0.553090845735,0.)); +#144715 = ORIENTED_EDGE('',*,*,#144716,.T.); +#144716 = EDGE_CURVE('',#144709,#144717,#144719,.T.); +#144717 = VERTEX_POINT('',#144718); +#144718 = CARTESIAN_POINT('',(85.418746,-110.213321,1.585)); +#144719 = CIRCLE('',#144720,0.150000199605); +#144720 = AXIS2_PLACEMENT_3D('',#144721,#144722,#144723); +#144721 = CARTESIAN_POINT('',(85.31279079848,-110.1071440008,1.585)); +#144722 = DIRECTION('',(0.,0.,-1.)); +#144723 = DIRECTION('',(-0.381718148583,0.92427877561,-0.)); +#144724 = ORIENTED_EDGE('',*,*,#144725,.T.); +#144725 = EDGE_CURVE('',#144717,#144726,#144728,.T.); +#144726 = VERTEX_POINT('',#144727); +#144727 = CARTESIAN_POINT('',(84.283207,-110.97381,1.585)); +#144728 = LINE('',#144729,#144730); +#144729 = CARTESIAN_POINT('',(85.418746,-110.213321,1.585)); +#144730 = VECTOR('',#144731,1.); +#144731 = DIRECTION('',(-0.830878956213,-0.556453196704,0.)); +#144732 = ORIENTED_EDGE('',*,*,#144733,.T.); +#144733 = EDGE_CURVE('',#144726,#144734,#144736,.T.); +#144734 = VERTEX_POINT('',#144735); +#144735 = CARTESIAN_POINT('',(85.418746,-111.7343,1.585)); +#144736 = LINE('',#144737,#144738); +#144737 = CARTESIAN_POINT('',(84.283207,-110.97381,1.585)); +#144738 = VECTOR('',#144739,1.); +#144739 = DIRECTION('',(0.830878617913,-0.556453701843,0.)); +#144740 = ORIENTED_EDGE('',*,*,#144741,.T.); +#144741 = EDGE_CURVE('',#144734,#144742,#144744,.T.); +#144742 = VERTEX_POINT('',#144743); +#144743 = CARTESIAN_POINT('',(85.255533,-111.979119,1.585)); +#144744 = CIRCLE('',#144745,0.150000458656); +#144745 = AXIS2_PLACEMENT_3D('',#144746,#144747,#144748); +#144746 = CARTESIAN_POINT('',(85.31278969366,-111.8404762626,1.585)); +#144747 = DIRECTION('',(0.,0.,-1.)); +#144748 = DIRECTION('',(0.706373215715,0.707839586432,0.)); +#144749 = ORIENTED_EDGE('',*,*,#144750,.T.); +#144750 = EDGE_CURVE('',#144742,#144751,#144753,.T.); +#144751 = VERTEX_POINT('',#144752); +#144752 = CARTESIAN_POINT('',(84.01279,-111.154088,1.585)); +#144753 = LINE('',#144754,#144755); +#144754 = CARTESIAN_POINT('',(85.255533,-111.979119,1.585)); +#144755 = VECTOR('',#144756,1.); +#144756 = DIRECTION('',(-0.833120640512,0.553091311045,0.)); +#144757 = ORIENTED_EDGE('',*,*,#144758,.T.); +#144758 = EDGE_CURVE('',#144751,#144759,#144761,.T.); +#144759 = VERTEX_POINT('',#144760); +#144760 = CARTESIAN_POINT('',(82.770047,-111.979119,1.585)); +#144761 = LINE('',#144762,#144763); +#144762 = CARTESIAN_POINT('',(84.01279,-111.154088,1.585)); +#144763 = VECTOR('',#144764,1.); +#144764 = DIRECTION('',(-0.833120640512,-0.553091311045,0.)); +#144765 = ORIENTED_EDGE('',*,*,#144766,.T.); +#144766 = EDGE_CURVE('',#144759,#144767,#144769,.T.); +#144767 = VERTEX_POINT('',#144768); +#144768 = CARTESIAN_POINT('',(82.606835,-111.7343,1.585)); +#144769 = CIRCLE('',#144770,0.149999951563); +#144770 = AXIS2_PLACEMENT_3D('',#144771,#144772,#144773); +#144771 = CARTESIAN_POINT('',(82.712789849692,-111.8404769998,1.585)); +#144772 = DIRECTION('',(0.,0.,-1.)); +#144773 = DIRECTION('',(0.381714458644,-0.92428029951,0.)); +#144774 = ORIENTED_EDGE('',*,*,#144775,.T.); +#144775 = EDGE_CURVE('',#144767,#144776,#144778,.T.); +#144776 = VERTEX_POINT('',#144777); +#144777 = CARTESIAN_POINT('',(83.742372,-110.97381,1.585)); +#144778 = LINE('',#144779,#144780); +#144779 = CARTESIAN_POINT('',(82.606835,-111.7343,1.585)); +#144780 = VECTOR('',#144781,1.); +#144781 = DIRECTION('',(0.830878164782,0.556454378444,0.)); +#144782 = ORIENTED_EDGE('',*,*,#144783,.T.); +#144783 = EDGE_CURVE('',#144776,#144784,#144786,.T.); +#144784 = VERTEX_POINT('',#144785); +#144785 = CARTESIAN_POINT('',(82.606835,-110.213321,1.585)); +#144786 = LINE('',#144787,#144788); +#144787 = CARTESIAN_POINT('',(83.742372,-110.97381,1.585)); +#144788 = VECTOR('',#144789,1.); +#144789 = DIRECTION('',(-0.830878503082,0.556453873305,0.)); +#144790 = ORIENTED_EDGE('',*,*,#144791,.T.); +#144791 = EDGE_CURVE('',#144784,#144792,#144794,.T.); +#144792 = VERTEX_POINT('',#144793); +#144793 = CARTESIAN_POINT('',(82.770047,-109.968502,1.585)); +#144794 = CIRCLE('',#144795,0.150000000327); +#144795 = AXIS2_PLACEMENT_3D('',#144796,#144797,#144798); +#144796 = CARTESIAN_POINT('',(82.712790057666,-110.1071441388,1.585)); +#144797 = DIRECTION('',(0.,0.,-1.)); +#144798 = DIRECTION('',(-0.706367049567,-0.707845739753,-0.)); +#144799 = ORIENTED_EDGE('',*,*,#144800,.T.); +#144800 = EDGE_CURVE('',#144792,#144707,#144801,.T.); +#144801 = LINE('',#144802,#144803); +#144802 = CARTESIAN_POINT('',(82.770047,-109.968502,1.585)); +#144803 = VECTOR('',#144804,1.); +#144804 = DIRECTION('',(0.833120949421,-0.553090845735,0.)); +#144805 = PLANE('',#144806); +#144806 = AXIS2_PLACEMENT_3D('',#144807,#144808,#144809); +#144807 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144808 = DIRECTION('',(0.,0.,1.)); +#144809 = DIRECTION('',(1.,0.,-0.)); +#144810 = SHELL_BASED_SURFACE_MODEL('',(#144811)); +#144811 = OPEN_SHELL('',(#144812)); +#144812 = ADVANCED_FACE('',(#144813),#144849,.T.); +#144813 = FACE_BOUND('',#144814,.F.); +#144814 = EDGE_LOOP('',(#144815,#144826,#144834,#144843)); +#144815 = ORIENTED_EDGE('',*,*,#144816,.T.); +#144816 = EDGE_CURVE('',#144817,#144819,#144821,.T.); +#144817 = VERTEX_POINT('',#144818); +#144818 = CARTESIAN_POINT('',(118.77607,-111.8731,1.585)); +#144819 = VERTEX_POINT('',#144820); +#144820 = CARTESIAN_POINT('',(118.77607,-111.7531,1.585)); +#144821 = CIRCLE('',#144822,6.000000000042E-02); +#144822 = AXIS2_PLACEMENT_3D('',#144823,#144824,#144825); +#144823 = CARTESIAN_POINT('',(118.77606977441,-111.8131,1.585)); +#144824 = DIRECTION('',(0.,0.,-1.)); +#144825 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#144826 = ORIENTED_EDGE('',*,*,#144827,.T.); +#144827 = EDGE_CURVE('',#144819,#144828,#144830,.T.); +#144828 = VERTEX_POINT('',#144829); +#144829 = CARTESIAN_POINT('',(119.05723,-111.7531,1.585)); +#144830 = LINE('',#144831,#144832); +#144831 = CARTESIAN_POINT('',(118.77607,-111.7531,1.585)); +#144832 = VECTOR('',#144833,1.); +#144833 = DIRECTION('',(1.,0.,0.)); +#144834 = ORIENTED_EDGE('',*,*,#144835,.T.); +#144835 = EDGE_CURVE('',#144828,#144836,#144838,.T.); +#144836 = VERTEX_POINT('',#144837); +#144837 = CARTESIAN_POINT('',(119.05723,-111.8731,1.585)); +#144838 = CIRCLE('',#144839,6.000000000042E-02); +#144839 = AXIS2_PLACEMENT_3D('',#144840,#144841,#144842); +#144840 = CARTESIAN_POINT('',(119.05723022558,-111.8131,1.585)); +#144841 = DIRECTION('',(0.,0.,-1.)); +#144842 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#144843 = ORIENTED_EDGE('',*,*,#144844,.T.); +#144844 = EDGE_CURVE('',#144836,#144817,#144845,.T.); +#144845 = LINE('',#144846,#144847); +#144846 = CARTESIAN_POINT('',(119.05723,-111.8731,1.585)); +#144847 = VECTOR('',#144848,1.); +#144848 = DIRECTION('',(-1.,0.,0.)); +#144849 = PLANE('',#144850); +#144850 = AXIS2_PLACEMENT_3D('',#144851,#144852,#144853); +#144851 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144852 = DIRECTION('',(0.,0.,1.)); +#144853 = DIRECTION('',(1.,0.,-0.)); +#144854 = SHELL_BASED_SURFACE_MODEL('',(#144855)); +#144855 = OPEN_SHELL('',(#144856)); +#144856 = ADVANCED_FACE('',(#144857),#144893,.T.); +#144857 = FACE_BOUND('',#144858,.F.); +#144858 = EDGE_LOOP('',(#144859,#144870,#144878,#144887)); +#144859 = ORIENTED_EDGE('',*,*,#144860,.T.); +#144860 = EDGE_CURVE('',#144861,#144863,#144865,.T.); +#144861 = VERTEX_POINT('',#144862); +#144862 = CARTESIAN_POINT('',(132.77607,-111.8731,1.585)); +#144863 = VERTEX_POINT('',#144864); +#144864 = CARTESIAN_POINT('',(132.77607,-111.7531,1.585)); +#144865 = CIRCLE('',#144866,6.000000000042E-02); +#144866 = AXIS2_PLACEMENT_3D('',#144867,#144868,#144869); +#144867 = CARTESIAN_POINT('',(132.77606977441,-111.8131,1.585)); +#144868 = DIRECTION('',(0.,0.,-1.)); +#144869 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#144870 = ORIENTED_EDGE('',*,*,#144871,.T.); +#144871 = EDGE_CURVE('',#144863,#144872,#144874,.T.); +#144872 = VERTEX_POINT('',#144873); +#144873 = CARTESIAN_POINT('',(133.05723,-111.7531,1.585)); +#144874 = LINE('',#144875,#144876); +#144875 = CARTESIAN_POINT('',(132.77607,-111.7531,1.585)); +#144876 = VECTOR('',#144877,1.); +#144877 = DIRECTION('',(1.,0.,0.)); +#144878 = ORIENTED_EDGE('',*,*,#144879,.T.); +#144879 = EDGE_CURVE('',#144872,#144880,#144882,.T.); +#144880 = VERTEX_POINT('',#144881); +#144881 = CARTESIAN_POINT('',(133.05723,-111.8731,1.585)); +#144882 = CIRCLE('',#144883,6.000000000042E-02); +#144883 = AXIS2_PLACEMENT_3D('',#144884,#144885,#144886); +#144884 = CARTESIAN_POINT('',(133.05723022558,-111.8131,1.585)); +#144885 = DIRECTION('',(0.,0.,-1.)); +#144886 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#144887 = ORIENTED_EDGE('',*,*,#144888,.T.); +#144888 = EDGE_CURVE('',#144880,#144861,#144889,.T.); +#144889 = LINE('',#144890,#144891); +#144890 = CARTESIAN_POINT('',(133.05723,-111.8731,1.585)); +#144891 = VECTOR('',#144892,1.); +#144892 = DIRECTION('',(-1.,0.,0.)); +#144893 = PLANE('',#144894); +#144894 = AXIS2_PLACEMENT_3D('',#144895,#144896,#144897); +#144895 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144896 = DIRECTION('',(0.,0.,1.)); +#144897 = DIRECTION('',(1.,0.,-0.)); +#144898 = SHELL_BASED_SURFACE_MODEL('',(#144899)); +#144899 = OPEN_SHELL('',(#144900)); +#144900 = ADVANCED_FACE('',(#144901),#144937,.T.); +#144901 = FACE_BOUND('',#144902,.F.); +#144902 = EDGE_LOOP('',(#144903,#144914,#144922,#144931)); +#144903 = ORIENTED_EDGE('',*,*,#144904,.T.); +#144904 = EDGE_CURVE('',#144905,#144907,#144909,.T.); +#144905 = VERTEX_POINT('',#144906); +#144906 = CARTESIAN_POINT('',(136.77607,-111.8731,1.585)); +#144907 = VERTEX_POINT('',#144908); +#144908 = CARTESIAN_POINT('',(136.77607,-111.7531,1.585)); +#144909 = CIRCLE('',#144910,6.000000000042E-02); +#144910 = AXIS2_PLACEMENT_3D('',#144911,#144912,#144913); +#144911 = CARTESIAN_POINT('',(136.77606977441,-111.8131,1.585)); +#144912 = DIRECTION('',(0.,0.,-1.)); +#144913 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#144914 = ORIENTED_EDGE('',*,*,#144915,.T.); +#144915 = EDGE_CURVE('',#144907,#144916,#144918,.T.); +#144916 = VERTEX_POINT('',#144917); +#144917 = CARTESIAN_POINT('',(137.05723,-111.7531,1.585)); +#144918 = LINE('',#144919,#144920); +#144919 = CARTESIAN_POINT('',(136.77607,-111.7531,1.585)); +#144920 = VECTOR('',#144921,1.); +#144921 = DIRECTION('',(1.,0.,0.)); +#144922 = ORIENTED_EDGE('',*,*,#144923,.T.); +#144923 = EDGE_CURVE('',#144916,#144924,#144926,.T.); +#144924 = VERTEX_POINT('',#144925); +#144925 = CARTESIAN_POINT('',(137.05723,-111.8731,1.585)); +#144926 = CIRCLE('',#144927,6.000000000042E-02); +#144927 = AXIS2_PLACEMENT_3D('',#144928,#144929,#144930); +#144928 = CARTESIAN_POINT('',(137.05723022558,-111.8131,1.585)); +#144929 = DIRECTION('',(0.,0.,-1.)); +#144930 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#144931 = ORIENTED_EDGE('',*,*,#144932,.T.); +#144932 = EDGE_CURVE('',#144924,#144905,#144933,.T.); +#144933 = LINE('',#144934,#144935); +#144934 = CARTESIAN_POINT('',(137.05723,-111.8731,1.585)); +#144935 = VECTOR('',#144936,1.); +#144936 = DIRECTION('',(-1.,0.,0.)); +#144937 = PLANE('',#144938); +#144938 = AXIS2_PLACEMENT_3D('',#144939,#144940,#144941); +#144939 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144940 = DIRECTION('',(0.,0.,1.)); +#144941 = DIRECTION('',(1.,0.,-0.)); +#144942 = SHELL_BASED_SURFACE_MODEL('',(#144943)); +#144943 = OPEN_SHELL('',(#144944)); +#144944 = ADVANCED_FACE('',(#144945),#144981,.T.); +#144945 = FACE_BOUND('',#144946,.F.); +#144946 = EDGE_LOOP('',(#144947,#144958,#144966,#144975)); +#144947 = ORIENTED_EDGE('',*,*,#144948,.T.); +#144948 = EDGE_CURVE('',#144949,#144951,#144953,.T.); +#144949 = VERTEX_POINT('',#144950); +#144950 = CARTESIAN_POINT('',(92.004392,-111.8606,1.585)); +#144951 = VERTEX_POINT('',#144952); +#144952 = CARTESIAN_POINT('',(92.004392,-111.7406,1.585)); +#144953 = CIRCLE('',#144954,6.000000000042E-02); +#144954 = AXIS2_PLACEMENT_3D('',#144955,#144956,#144957); +#144955 = CARTESIAN_POINT('',(92.004391774412,-111.8006,1.585)); +#144956 = DIRECTION('',(0.,0.,-1.)); +#144957 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#144958 = ORIENTED_EDGE('',*,*,#144959,.T.); +#144959 = EDGE_CURVE('',#144951,#144960,#144962,.T.); +#144960 = VERTEX_POINT('',#144961); +#144961 = CARTESIAN_POINT('',(92.478908,-111.7406,1.585)); +#144962 = LINE('',#144963,#144964); +#144963 = CARTESIAN_POINT('',(92.004392,-111.7406,1.585)); +#144964 = VECTOR('',#144965,1.); +#144965 = DIRECTION('',(1.,0.,0.)); +#144966 = ORIENTED_EDGE('',*,*,#144967,.T.); +#144967 = EDGE_CURVE('',#144960,#144968,#144970,.T.); +#144968 = VERTEX_POINT('',#144969); +#144969 = CARTESIAN_POINT('',(92.478908,-111.8606,1.585)); +#144970 = CIRCLE('',#144971,6.000000000043E-02); +#144971 = AXIS2_PLACEMENT_3D('',#144972,#144973,#144974); +#144972 = CARTESIAN_POINT('',(92.478908225588,-111.8006,1.585)); +#144973 = DIRECTION('',(0.,0.,-1.)); +#144974 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144975 = ORIENTED_EDGE('',*,*,#144976,.T.); +#144976 = EDGE_CURVE('',#144968,#144949,#144977,.T.); +#144977 = LINE('',#144978,#144979); +#144978 = CARTESIAN_POINT('',(92.478908,-111.8606,1.585)); +#144979 = VECTOR('',#144980,1.); +#144980 = DIRECTION('',(-1.,0.,0.)); +#144981 = PLANE('',#144982); +#144982 = AXIS2_PLACEMENT_3D('',#144983,#144984,#144985); +#144983 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144984 = DIRECTION('',(0.,0.,1.)); +#144985 = DIRECTION('',(1.,0.,-0.)); +#144986 = SHELL_BASED_SURFACE_MODEL('',(#144987)); +#144987 = OPEN_SHELL('',(#144988)); +#144988 = ADVANCED_FACE('',(#144989),#145048,.T.); +#144989 = FACE_BOUND('',#144990,.F.); +#144990 = EDGE_LOOP('',(#144991,#145002,#145010,#145018,#145026,#145034, + #145042)); +#144991 = ORIENTED_EDGE('',*,*,#144992,.T.); +#144992 = EDGE_CURVE('',#144993,#144995,#144997,.T.); +#144993 = VERTEX_POINT('',#144994); +#144994 = CARTESIAN_POINT('',(95.179392,-111.8606,1.585)); +#144995 = VERTEX_POINT('',#144996); +#144996 = CARTESIAN_POINT('',(95.179392,-111.7406,1.585)); +#144997 = CIRCLE('',#144998,6.000000000043E-02); +#144998 = AXIS2_PLACEMENT_3D('',#144999,#145000,#145001); +#144999 = CARTESIAN_POINT('',(95.179391774412,-111.8006,1.585)); +#145000 = DIRECTION('',(0.,0.,-1.)); +#145001 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145002 = ORIENTED_EDGE('',*,*,#145003,.T.); +#145003 = EDGE_CURVE('',#144995,#145004,#145006,.T.); +#145004 = VERTEX_POINT('',#145005); +#145005 = CARTESIAN_POINT('',(95.495872,-111.7406,1.585)); +#145006 = LINE('',#145007,#145008); +#145007 = CARTESIAN_POINT('',(95.179392,-111.7406,1.585)); +#145008 = VECTOR('',#145009,1.); +#145009 = DIRECTION('',(1.,0.,0.)); +#145010 = ORIENTED_EDGE('',*,*,#145011,.T.); +#145011 = EDGE_CURVE('',#145004,#145012,#145014,.T.); +#145012 = VERTEX_POINT('',#145013); +#145013 = CARTESIAN_POINT('',(95.494532,-111.743836,1.585)); +#145014 = LINE('',#145015,#145016); +#145015 = CARTESIAN_POINT('',(95.495872,-111.7406,1.585)); +#145016 = VECTOR('',#145017,1.); +#145017 = DIRECTION('',(-0.382587147216,-0.923919409248,0.)); +#145018 = ORIENTED_EDGE('',*,*,#145019,.T.); +#145019 = EDGE_CURVE('',#145012,#145020,#145022,.T.); +#145020 = VERTEX_POINT('',#145021); +#145021 = CARTESIAN_POINT('',(95.494532,-111.802364,1.585)); +#145022 = LINE('',#145023,#145024); +#145023 = CARTESIAN_POINT('',(95.494532,-111.743836,1.585)); +#145024 = VECTOR('',#145025,1.); +#145025 = DIRECTION('',(0.,-1.,0.)); +#145026 = ORIENTED_EDGE('',*,*,#145027,.T.); +#145027 = EDGE_CURVE('',#145020,#145028,#145030,.T.); +#145028 = VERTEX_POINT('',#145029); +#145029 = CARTESIAN_POINT('',(95.51693,-111.856436,1.585)); +#145030 = LINE('',#145031,#145032); +#145031 = CARTESIAN_POINT('',(95.494532,-111.802364,1.585)); +#145032 = VECTOR('',#145033,1.); +#145033 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#145034 = ORIENTED_EDGE('',*,*,#145035,.T.); +#145035 = EDGE_CURVE('',#145028,#145036,#145038,.T.); +#145036 = VERTEX_POINT('',#145037); +#145037 = CARTESIAN_POINT('',(95.521094,-111.8606,1.585)); +#145038 = LINE('',#145039,#145040); +#145039 = CARTESIAN_POINT('',(95.51693,-111.856436,1.585)); +#145040 = VECTOR('',#145041,1.); +#145041 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#145042 = ORIENTED_EDGE('',*,*,#145043,.T.); +#145043 = EDGE_CURVE('',#145036,#144993,#145044,.T.); +#145044 = LINE('',#145045,#145046); +#145045 = CARTESIAN_POINT('',(95.521094,-111.8606,1.585)); +#145046 = VECTOR('',#145047,1.); +#145047 = DIRECTION('',(-1.,0.,0.)); +#145048 = PLANE('',#145049); +#145049 = AXIS2_PLACEMENT_3D('',#145050,#145051,#145052); +#145050 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145051 = DIRECTION('',(0.,0.,1.)); +#145052 = DIRECTION('',(1.,0.,-0.)); +#145053 = SHELL_BASED_SURFACE_MODEL('',(#145054)); +#145054 = OPEN_SHELL('',(#145055)); +#145055 = ADVANCED_FACE('',(#145056),#145092,.T.); +#145056 = FACE_BOUND('',#145057,.F.); +#145057 = EDGE_LOOP('',(#145058,#145069,#145077,#145086)); +#145058 = ORIENTED_EDGE('',*,*,#145059,.T.); +#145059 = EDGE_CURVE('',#145060,#145062,#145064,.T.); +#145060 = VERTEX_POINT('',#145061); +#145061 = CARTESIAN_POINT('',(98.504392,-111.8606,1.585)); +#145062 = VERTEX_POINT('',#145063); +#145063 = CARTESIAN_POINT('',(98.504392,-111.7406,1.585)); +#145064 = CIRCLE('',#145065,6.000000000042E-02); +#145065 = AXIS2_PLACEMENT_3D('',#145066,#145067,#145068); +#145066 = CARTESIAN_POINT('',(98.504391774412,-111.8006,1.585)); +#145067 = DIRECTION('',(0.,0.,-1.)); +#145068 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145069 = ORIENTED_EDGE('',*,*,#145070,.T.); +#145070 = EDGE_CURVE('',#145062,#145071,#145073,.T.); +#145071 = VERTEX_POINT('',#145072); +#145072 = CARTESIAN_POINT('',(98.978908,-111.7406,1.585)); +#145073 = LINE('',#145074,#145075); +#145074 = CARTESIAN_POINT('',(98.504392,-111.7406,1.585)); +#145075 = VECTOR('',#145076,1.); +#145076 = DIRECTION('',(1.,0.,0.)); +#145077 = ORIENTED_EDGE('',*,*,#145078,.T.); +#145078 = EDGE_CURVE('',#145071,#145079,#145081,.T.); +#145079 = VERTEX_POINT('',#145080); +#145080 = CARTESIAN_POINT('',(98.978908,-111.8606,1.585)); +#145081 = CIRCLE('',#145082,6.000000000043E-02); +#145082 = AXIS2_PLACEMENT_3D('',#145083,#145084,#145085); +#145083 = CARTESIAN_POINT('',(98.978908225588,-111.8006,1.585)); +#145084 = DIRECTION('',(0.,0.,-1.)); +#145085 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145086 = ORIENTED_EDGE('',*,*,#145087,.T.); +#145087 = EDGE_CURVE('',#145079,#145060,#145088,.T.); +#145088 = LINE('',#145089,#145090); +#145089 = CARTESIAN_POINT('',(98.978908,-111.8606,1.585)); +#145090 = VECTOR('',#145091,1.); +#145091 = DIRECTION('',(-1.,0.,0.)); +#145092 = PLANE('',#145093); +#145093 = AXIS2_PLACEMENT_3D('',#145094,#145095,#145096); +#145094 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145095 = DIRECTION('',(0.,0.,1.)); +#145096 = DIRECTION('',(1.,0.,-0.)); +#145097 = SHELL_BASED_SURFACE_MODEL('',(#145098)); +#145098 = OPEN_SHELL('',(#145099)); +#145099 = ADVANCED_FACE('',(#145100),#145136,.T.); +#145100 = FACE_BOUND('',#145101,.F.); +#145101 = EDGE_LOOP('',(#145102,#145113,#145121,#145130)); +#145102 = ORIENTED_EDGE('',*,*,#145103,.T.); +#145103 = EDGE_CURVE('',#145104,#145106,#145108,.T.); +#145104 = VERTEX_POINT('',#145105); +#145105 = CARTESIAN_POINT('',(102.679392,-111.8606,1.585)); +#145106 = VERTEX_POINT('',#145107); +#145107 = CARTESIAN_POINT('',(102.679392,-111.7406,1.585)); +#145108 = CIRCLE('',#145109,6.000000000043E-02); +#145109 = AXIS2_PLACEMENT_3D('',#145110,#145111,#145112); +#145110 = CARTESIAN_POINT('',(102.67939177441,-111.8006,1.585)); +#145111 = DIRECTION('',(0.,0.,-1.)); +#145112 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145113 = ORIENTED_EDGE('',*,*,#145114,.T.); +#145114 = EDGE_CURVE('',#145106,#145115,#145117,.T.); +#145115 = VERTEX_POINT('',#145116); +#145116 = CARTESIAN_POINT('',(103.153908,-111.7406,1.585)); +#145117 = LINE('',#145118,#145119); +#145118 = CARTESIAN_POINT('',(102.679392,-111.7406,1.585)); +#145119 = VECTOR('',#145120,1.); +#145120 = DIRECTION('',(1.,0.,0.)); +#145121 = ORIENTED_EDGE('',*,*,#145122,.T.); +#145122 = EDGE_CURVE('',#145115,#145123,#145125,.T.); +#145123 = VERTEX_POINT('',#145124); +#145124 = CARTESIAN_POINT('',(103.153908,-111.8606,1.585)); +#145125 = CIRCLE('',#145126,6.000000000043E-02); +#145126 = AXIS2_PLACEMENT_3D('',#145127,#145128,#145129); +#145127 = CARTESIAN_POINT('',(103.15390822558,-111.8006,1.585)); +#145128 = DIRECTION('',(0.,0.,-1.)); +#145129 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145130 = ORIENTED_EDGE('',*,*,#145131,.T.); +#145131 = EDGE_CURVE('',#145123,#145104,#145132,.T.); +#145132 = LINE('',#145133,#145134); +#145133 = CARTESIAN_POINT('',(103.153908,-111.8606,1.585)); +#145134 = VECTOR('',#145135,1.); +#145135 = DIRECTION('',(-1.,0.,0.)); +#145136 = PLANE('',#145137); +#145137 = AXIS2_PLACEMENT_3D('',#145138,#145139,#145140); +#145138 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145139 = DIRECTION('',(0.,0.,1.)); +#145140 = DIRECTION('',(1.,0.,-0.)); +#145141 = SHELL_BASED_SURFACE_MODEL('',(#145142)); +#145142 = OPEN_SHELL('',(#145143)); +#145143 = ADVANCED_FACE('',(#145144),#145180,.T.); +#145144 = FACE_BOUND('',#145145,.F.); +#145145 = EDGE_LOOP('',(#145146,#145157,#145165,#145174)); +#145146 = ORIENTED_EDGE('',*,*,#145147,.T.); +#145147 = EDGE_CURVE('',#145148,#145150,#145152,.T.); +#145148 = VERTEX_POINT('',#145149); +#145149 = CARTESIAN_POINT('',(106.679392,-111.8606,1.585)); +#145150 = VERTEX_POINT('',#145151); +#145151 = CARTESIAN_POINT('',(106.679392,-111.7406,1.585)); +#145152 = CIRCLE('',#145153,6.000000000043E-02); +#145153 = AXIS2_PLACEMENT_3D('',#145154,#145155,#145156); +#145154 = CARTESIAN_POINT('',(106.67939177441,-111.8006,1.585)); +#145155 = DIRECTION('',(0.,0.,-1.)); +#145156 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145157 = ORIENTED_EDGE('',*,*,#145158,.T.); +#145158 = EDGE_CURVE('',#145150,#145159,#145161,.T.); +#145159 = VERTEX_POINT('',#145160); +#145160 = CARTESIAN_POINT('',(107.153908,-111.7406,1.585)); +#145161 = LINE('',#145162,#145163); +#145162 = CARTESIAN_POINT('',(106.679392,-111.7406,1.585)); +#145163 = VECTOR('',#145164,1.); +#145164 = DIRECTION('',(1.,0.,0.)); +#145165 = ORIENTED_EDGE('',*,*,#145166,.T.); +#145166 = EDGE_CURVE('',#145159,#145167,#145169,.T.); +#145167 = VERTEX_POINT('',#145168); +#145168 = CARTESIAN_POINT('',(107.153908,-111.8606,1.585)); +#145169 = CIRCLE('',#145170,6.000000000043E-02); +#145170 = AXIS2_PLACEMENT_3D('',#145171,#145172,#145173); +#145171 = CARTESIAN_POINT('',(107.15390822558,-111.8006,1.585)); +#145172 = DIRECTION('',(0.,0.,-1.)); +#145173 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145174 = ORIENTED_EDGE('',*,*,#145175,.T.); +#145175 = EDGE_CURVE('',#145167,#145148,#145176,.T.); +#145176 = LINE('',#145177,#145178); +#145177 = CARTESIAN_POINT('',(107.153908,-111.8606,1.585)); +#145178 = VECTOR('',#145179,1.); +#145179 = DIRECTION('',(-1.,0.,0.)); +#145180 = PLANE('',#145181); +#145181 = AXIS2_PLACEMENT_3D('',#145182,#145183,#145184); +#145182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145183 = DIRECTION('',(0.,0.,1.)); +#145184 = DIRECTION('',(1.,0.,-0.)); +#145185 = SHELL_BASED_SURFACE_MODEL('',(#145186)); +#145186 = OPEN_SHELL('',(#145187)); +#145187 = ADVANCED_FACE('',(#145188),#145224,.T.); +#145188 = FACE_BOUND('',#145189,.F.); +#145189 = EDGE_LOOP('',(#145190,#145201,#145209,#145218)); +#145190 = ORIENTED_EDGE('',*,*,#145191,.T.); +#145191 = EDGE_CURVE('',#145192,#145194,#145196,.T.); +#145192 = VERTEX_POINT('',#145193); +#145193 = CARTESIAN_POINT('',(110.679392,-111.8606,1.585)); +#145194 = VERTEX_POINT('',#145195); +#145195 = CARTESIAN_POINT('',(110.679392,-111.7406,1.585)); +#145196 = CIRCLE('',#145197,6.000000000043E-02); +#145197 = AXIS2_PLACEMENT_3D('',#145198,#145199,#145200); +#145198 = CARTESIAN_POINT('',(110.67939177441,-111.8006,1.585)); +#145199 = DIRECTION('',(0.,0.,-1.)); +#145200 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145201 = ORIENTED_EDGE('',*,*,#145202,.T.); +#145202 = EDGE_CURVE('',#145194,#145203,#145205,.T.); +#145203 = VERTEX_POINT('',#145204); +#145204 = CARTESIAN_POINT('',(111.153908,-111.7406,1.585)); +#145205 = LINE('',#145206,#145207); +#145206 = CARTESIAN_POINT('',(110.679392,-111.7406,1.585)); +#145207 = VECTOR('',#145208,1.); +#145208 = DIRECTION('',(1.,0.,0.)); +#145209 = ORIENTED_EDGE('',*,*,#145210,.T.); +#145210 = EDGE_CURVE('',#145203,#145211,#145213,.T.); +#145211 = VERTEX_POINT('',#145212); +#145212 = CARTESIAN_POINT('',(111.153908,-111.8606,1.585)); +#145213 = CIRCLE('',#145214,6.000000000043E-02); +#145214 = AXIS2_PLACEMENT_3D('',#145215,#145216,#145217); +#145215 = CARTESIAN_POINT('',(111.15390822558,-111.8006,1.585)); +#145216 = DIRECTION('',(0.,0.,-1.)); +#145217 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145218 = ORIENTED_EDGE('',*,*,#145219,.T.); +#145219 = EDGE_CURVE('',#145211,#145192,#145220,.T.); +#145220 = LINE('',#145221,#145222); +#145221 = CARTESIAN_POINT('',(111.153908,-111.8606,1.585)); +#145222 = VECTOR('',#145223,1.); +#145223 = DIRECTION('',(-1.,0.,0.)); +#145224 = PLANE('',#145225); +#145225 = AXIS2_PLACEMENT_3D('',#145226,#145227,#145228); +#145226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145227 = DIRECTION('',(0.,0.,1.)); +#145228 = DIRECTION('',(1.,0.,-0.)); +#145229 = SHELL_BASED_SURFACE_MODEL('',(#145230)); +#145230 = OPEN_SHELL('',(#145231)); +#145231 = ADVANCED_FACE('',(#145232),#145268,.T.); +#145232 = FACE_BOUND('',#145233,.F.); +#145233 = EDGE_LOOP('',(#145234,#145245,#145253,#145262)); +#145234 = ORIENTED_EDGE('',*,*,#145235,.T.); +#145235 = EDGE_CURVE('',#145236,#145238,#145240,.T.); +#145236 = VERTEX_POINT('',#145237); +#145237 = CARTESIAN_POINT('',(114.679392,-111.8606,1.585)); +#145238 = VERTEX_POINT('',#145239); +#145239 = CARTESIAN_POINT('',(114.679392,-111.7406,1.585)); +#145240 = CIRCLE('',#145241,6.000000000043E-02); +#145241 = AXIS2_PLACEMENT_3D('',#145242,#145243,#145244); +#145242 = CARTESIAN_POINT('',(114.67939177441,-111.8006,1.585)); +#145243 = DIRECTION('',(0.,0.,-1.)); +#145244 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145245 = ORIENTED_EDGE('',*,*,#145246,.T.); +#145246 = EDGE_CURVE('',#145238,#145247,#145249,.T.); +#145247 = VERTEX_POINT('',#145248); +#145248 = CARTESIAN_POINT('',(115.153908,-111.7406,1.585)); +#145249 = LINE('',#145250,#145251); +#145250 = CARTESIAN_POINT('',(114.679392,-111.7406,1.585)); +#145251 = VECTOR('',#145252,1.); +#145252 = DIRECTION('',(1.,0.,0.)); +#145253 = ORIENTED_EDGE('',*,*,#145254,.T.); +#145254 = EDGE_CURVE('',#145247,#145255,#145257,.T.); +#145255 = VERTEX_POINT('',#145256); +#145256 = CARTESIAN_POINT('',(115.153908,-111.8606,1.585)); +#145257 = CIRCLE('',#145258,6.000000000043E-02); +#145258 = AXIS2_PLACEMENT_3D('',#145259,#145260,#145261); +#145259 = CARTESIAN_POINT('',(115.15390822558,-111.8006,1.585)); +#145260 = DIRECTION('',(0.,0.,-1.)); +#145261 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145262 = ORIENTED_EDGE('',*,*,#145263,.T.); +#145263 = EDGE_CURVE('',#145255,#145236,#145264,.T.); +#145264 = LINE('',#145265,#145266); +#145265 = CARTESIAN_POINT('',(115.153908,-111.8606,1.585)); +#145266 = VECTOR('',#145267,1.); +#145267 = DIRECTION('',(-1.,0.,0.)); +#145268 = PLANE('',#145269); +#145269 = AXIS2_PLACEMENT_3D('',#145270,#145271,#145272); +#145270 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145271 = DIRECTION('',(0.,0.,1.)); +#145272 = DIRECTION('',(1.,0.,-0.)); +#145273 = SHELL_BASED_SURFACE_MODEL('',(#145274)); +#145274 = OPEN_SHELL('',(#145275)); +#145275 = ADVANCED_FACE('',(#145276),#145312,.T.); +#145276 = FACE_BOUND('',#145277,.F.); +#145277 = EDGE_LOOP('',(#145278,#145289,#145297,#145306)); +#145278 = ORIENTED_EDGE('',*,*,#145279,.T.); +#145279 = EDGE_CURVE('',#145280,#145282,#145284,.T.); +#145280 = VERTEX_POINT('',#145281); +#145281 = CARTESIAN_POINT('',(124.679392,-111.8606,1.585)); +#145282 = VERTEX_POINT('',#145283); +#145283 = CARTESIAN_POINT('',(124.679392,-111.7406,1.585)); +#145284 = CIRCLE('',#145285,6.000000000043E-02); +#145285 = AXIS2_PLACEMENT_3D('',#145286,#145287,#145288); +#145286 = CARTESIAN_POINT('',(124.67939177441,-111.8006,1.585)); +#145287 = DIRECTION('',(0.,0.,-1.)); +#145288 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145289 = ORIENTED_EDGE('',*,*,#145290,.T.); +#145290 = EDGE_CURVE('',#145282,#145291,#145293,.T.); +#145291 = VERTEX_POINT('',#145292); +#145292 = CARTESIAN_POINT('',(125.153908,-111.7406,1.585)); +#145293 = LINE('',#145294,#145295); +#145294 = CARTESIAN_POINT('',(124.679392,-111.7406,1.585)); +#145295 = VECTOR('',#145296,1.); +#145296 = DIRECTION('',(1.,0.,0.)); +#145297 = ORIENTED_EDGE('',*,*,#145298,.T.); +#145298 = EDGE_CURVE('',#145291,#145299,#145301,.T.); +#145299 = VERTEX_POINT('',#145300); +#145300 = CARTESIAN_POINT('',(125.153908,-111.8606,1.585)); +#145301 = CIRCLE('',#145302,6.000000000043E-02); +#145302 = AXIS2_PLACEMENT_3D('',#145303,#145304,#145305); +#145303 = CARTESIAN_POINT('',(125.15390822558,-111.8006,1.585)); +#145304 = DIRECTION('',(0.,0.,-1.)); +#145305 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145306 = ORIENTED_EDGE('',*,*,#145307,.T.); +#145307 = EDGE_CURVE('',#145299,#145280,#145308,.T.); +#145308 = LINE('',#145309,#145310); +#145309 = CARTESIAN_POINT('',(125.153908,-111.8606,1.585)); +#145310 = VECTOR('',#145311,1.); +#145311 = DIRECTION('',(-1.,0.,0.)); +#145312 = PLANE('',#145313); +#145313 = AXIS2_PLACEMENT_3D('',#145314,#145315,#145316); +#145314 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145315 = DIRECTION('',(0.,0.,1.)); +#145316 = DIRECTION('',(1.,0.,-0.)); +#145317 = SHELL_BASED_SURFACE_MODEL('',(#145318)); +#145318 = OPEN_SHELL('',(#145319)); +#145319 = ADVANCED_FACE('',(#145320),#145356,.T.); +#145320 = FACE_BOUND('',#145321,.F.); +#145321 = EDGE_LOOP('',(#145322,#145333,#145341,#145350)); +#145322 = ORIENTED_EDGE('',*,*,#145323,.T.); +#145323 = EDGE_CURVE('',#145324,#145326,#145328,.T.); +#145324 = VERTEX_POINT('',#145325); +#145325 = CARTESIAN_POINT('',(128.679392,-111.8606,1.585)); +#145326 = VERTEX_POINT('',#145327); +#145327 = CARTESIAN_POINT('',(128.679392,-111.7406,1.585)); +#145328 = CIRCLE('',#145329,6.000000000043E-02); +#145329 = AXIS2_PLACEMENT_3D('',#145330,#145331,#145332); +#145330 = CARTESIAN_POINT('',(128.67939177441,-111.8006,1.585)); +#145331 = DIRECTION('',(0.,0.,-1.)); +#145332 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#145333 = ORIENTED_EDGE('',*,*,#145334,.T.); +#145334 = EDGE_CURVE('',#145326,#145335,#145337,.T.); +#145335 = VERTEX_POINT('',#145336); +#145336 = CARTESIAN_POINT('',(129.153908,-111.7406,1.585)); +#145337 = LINE('',#145338,#145339); +#145338 = CARTESIAN_POINT('',(128.679392,-111.7406,1.585)); +#145339 = VECTOR('',#145340,1.); +#145340 = DIRECTION('',(1.,0.,0.)); +#145341 = ORIENTED_EDGE('',*,*,#145342,.T.); +#145342 = EDGE_CURVE('',#145335,#145343,#145345,.T.); +#145343 = VERTEX_POINT('',#145344); +#145344 = CARTESIAN_POINT('',(129.153908,-111.8606,1.585)); +#145345 = CIRCLE('',#145346,6.000000000042E-02); +#145346 = AXIS2_PLACEMENT_3D('',#145347,#145348,#145349); +#145347 = CARTESIAN_POINT('',(129.15390822558,-111.8006,1.585)); +#145348 = DIRECTION('',(0.,0.,-1.)); +#145349 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#145350 = ORIENTED_EDGE('',*,*,#145351,.T.); +#145351 = EDGE_CURVE('',#145343,#145324,#145352,.T.); +#145352 = LINE('',#145353,#145354); +#145353 = CARTESIAN_POINT('',(129.153908,-111.8606,1.585)); +#145354 = VECTOR('',#145355,1.); +#145355 = DIRECTION('',(-1.,0.,0.)); +#145356 = PLANE('',#145357); +#145357 = AXIS2_PLACEMENT_3D('',#145358,#145359,#145360); +#145358 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145359 = DIRECTION('',(0.,0.,1.)); +#145360 = DIRECTION('',(1.,0.,-0.)); +#145361 = SHELL_BASED_SURFACE_MODEL('',(#145362)); +#145362 = OPEN_SHELL('',(#145363)); +#145363 = ADVANCED_FACE('',(#145364),#145523,.T.); +#145364 = FACE_BOUND('',#145365,.F.); +#145365 = EDGE_LOOP('',(#145366,#145377,#145385,#145393,#145401,#145409, + #145417,#145425,#145434,#145442,#145451,#145459,#145467,#145475, + #145484,#145492,#145500,#145508,#145517)); +#145366 = ORIENTED_EDGE('',*,*,#145367,.T.); +#145367 = EDGE_CURVE('',#145368,#145370,#145372,.T.); +#145368 = VERTEX_POINT('',#145369); +#145369 = CARTESIAN_POINT('',(115.621204,-110.328456,1.585)); +#145370 = VERTEX_POINT('',#145371); +#145371 = CARTESIAN_POINT('',(116.130599,-110.337786,1.585)); +#145372 = CIRCLE('',#145373,0.450326844012); +#145373 = AXIS2_PLACEMENT_3D('',#145374,#145375,#145376); +#145374 = CARTESIAN_POINT('',(115.8691010301,-110.7044098919,1.585)); +#145375 = DIRECTION('',(0.,0.,-1.)); +#145376 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#145377 = ORIENTED_EDGE('',*,*,#145378,.T.); +#145378 = EDGE_CURVE('',#145370,#145379,#145381,.T.); +#145379 = VERTEX_POINT('',#145380); +#145380 = CARTESIAN_POINT('',(116.194052,-110.403316,1.585)); +#145381 = LINE('',#145382,#145383); +#145382 = CARTESIAN_POINT('',(116.130599,-110.337786,1.585)); +#145383 = VECTOR('',#145384,1.); +#145384 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#145385 = ORIENTED_EDGE('',*,*,#145386,.T.); +#145386 = EDGE_CURVE('',#145379,#145387,#145389,.T.); +#145387 = VERTEX_POINT('',#145388); +#145388 = CARTESIAN_POINT('',(116.252113,-110.523763,1.585)); +#145389 = LINE('',#145390,#145391); +#145390 = CARTESIAN_POINT('',(116.194052,-110.403316,1.585)); +#145391 = VECTOR('',#145392,1.); +#145392 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#145393 = ORIENTED_EDGE('',*,*,#145394,.T.); +#145394 = EDGE_CURVE('',#145387,#145395,#145397,.T.); +#145395 = VERTEX_POINT('',#145396); +#145396 = CARTESIAN_POINT('',(116.251354,-110.650095,1.585)); +#145397 = LINE('',#145398,#145399); +#145398 = CARTESIAN_POINT('',(116.252113,-110.523763,1.585)); +#145399 = VECTOR('',#145400,1.); +#145400 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#145401 = ORIENTED_EDGE('',*,*,#145402,.T.); +#145402 = EDGE_CURVE('',#145395,#145403,#145405,.T.); +#145403 = VERTEX_POINT('',#145404); +#145404 = CARTESIAN_POINT('',(116.193296,-110.818158,1.585)); +#145405 = LINE('',#145406,#145407); +#145406 = CARTESIAN_POINT('',(116.251354,-110.650095,1.585)); +#145407 = VECTOR('',#145408,1.); +#145408 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#145409 = ORIENTED_EDGE('',*,*,#145410,.T.); +#145410 = EDGE_CURVE('',#145403,#145411,#145413,.T.); +#145411 = VERTEX_POINT('',#145412); +#145412 = CARTESIAN_POINT('',(115.740573,-111.272919,1.585)); +#145413 = LINE('',#145414,#145415); +#145414 = CARTESIAN_POINT('',(116.193296,-110.818158,1.585)); +#145415 = VECTOR('',#145416,1.); +#145416 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#145417 = ORIENTED_EDGE('',*,*,#145418,.T.); +#145418 = EDGE_CURVE('',#145411,#145419,#145421,.T.); +#145419 = VERTEX_POINT('',#145420); +#145420 = CARTESIAN_POINT('',(116.193186,-111.27436,1.585)); +#145421 = LINE('',#145422,#145423); +#145422 = CARTESIAN_POINT('',(115.740573,-111.272919,1.585)); +#145423 = VECTOR('',#145424,1.); +#145424 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#145425 = ORIENTED_EDGE('',*,*,#145426,.T.); +#145426 = EDGE_CURVE('',#145419,#145427,#145429,.T.); +#145427 = VERTEX_POINT('',#145428); +#145428 = CARTESIAN_POINT('',(116.178554,-111.422919,1.585)); +#145429 = CIRCLE('',#145430,7.500006711463E-02); +#145430 = AXIS2_PLACEMENT_3D('',#145431,#145432,#145433); +#145431 = CARTESIAN_POINT('',(116.17855406711,-111.3479189328,1.585)); +#145432 = DIRECTION('',(0.,0.,-1.)); +#145433 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#145434 = ORIENTED_EDGE('',*,*,#145435,.T.); +#145435 = EDGE_CURVE('',#145427,#145436,#145438,.T.); +#145436 = VERTEX_POINT('',#145437); +#145437 = CARTESIAN_POINT('',(115.544875,-111.421478,1.585)); +#145438 = LINE('',#145439,#145440); +#145439 = CARTESIAN_POINT('',(116.178554,-111.422919,1.585)); +#145440 = VECTOR('',#145441,1.); +#145441 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#145442 = ORIENTED_EDGE('',*,*,#145443,.T.); +#145443 = EDGE_CURVE('',#145436,#145444,#145446,.T.); +#145444 = VERTEX_POINT('',#145445); +#145445 = CARTESIAN_POINT('',(115.506474,-111.294886,1.585)); +#145446 = CIRCLE('',#145447,7.500021013108E-02); +#145447 = AXIS2_PLACEMENT_3D('',#145448,#145449,#145450); +#145448 = CARTESIAN_POINT('',(115.5595073167,-111.3479189976,1.585)); +#145449 = DIRECTION('',(0.,0.,-1.)); +#145450 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#145451 = ORIENTED_EDGE('',*,*,#145452,.T.); +#145452 = EDGE_CURVE('',#145444,#145453,#145455,.T.); +#145453 = VERTEX_POINT('',#145454); +#145454 = CARTESIAN_POINT('',(116.065382,-110.735976,1.585)); +#145455 = LINE('',#145456,#145457); +#145456 = CARTESIAN_POINT('',(115.506474,-111.294886,1.585)); +#145457 = VECTOR('',#145458,1.); +#145458 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#145459 = ORIENTED_EDGE('',*,*,#145460,.T.); +#145460 = EDGE_CURVE('',#145453,#145461,#145463,.T.); +#145461 = VERTEX_POINT('',#145462); +#145462 = CARTESIAN_POINT('',(116.103554,-110.621463,1.585)); +#145463 = LINE('',#145464,#145465); +#145464 = CARTESIAN_POINT('',(116.065382,-110.735976,1.585)); +#145465 = VECTOR('',#145466,1.); +#145466 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#145467 = ORIENTED_EDGE('',*,*,#145468,.T.); +#145468 = EDGE_CURVE('',#145461,#145469,#145471,.T.); +#145469 = VERTEX_POINT('',#145470); +#145470 = CARTESIAN_POINT('',(116.103554,-110.5561,1.585)); +#145471 = LINE('',#145472,#145473); +#145472 = CARTESIAN_POINT('',(116.103554,-110.621463,1.585)); +#145473 = VECTOR('',#145474,1.); +#145474 = DIRECTION('',(0.,1.,0.)); +#145475 = ORIENTED_EDGE('',*,*,#145476,.T.); +#145476 = EDGE_CURVE('',#145469,#145477,#145479,.T.); +#145477 = VERTEX_POINT('',#145478); +#145478 = CARTESIAN_POINT('',(115.970373,-110.422919,1.585)); +#145479 = CIRCLE('',#145480,0.18686440374); +#145480 = AXIS2_PLACEMENT_3D('',#145481,#145482,#145483); +#145481 = CARTESIAN_POINT('',(115.922837,-110.603636,1.585)); +#145482 = DIRECTION('',(0.,0.,1.)); +#145483 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#145484 = ORIENTED_EDGE('',*,*,#145485,.T.); +#145485 = EDGE_CURVE('',#145477,#145486,#145488,.T.); +#145486 = VERTEX_POINT('',#145487); +#145487 = CARTESIAN_POINT('',(115.767688,-110.422919,1.585)); +#145488 = LINE('',#145489,#145490); +#145489 = CARTESIAN_POINT('',(115.970373,-110.422919,1.585)); +#145490 = VECTOR('',#145491,1.); +#145491 = DIRECTION('',(-1.,0.,0.)); +#145492 = ORIENTED_EDGE('',*,*,#145493,.T.); +#145493 = EDGE_CURVE('',#145486,#145494,#145496,.T.); +#145494 = VERTEX_POINT('',#145495); +#145495 = CARTESIAN_POINT('',(115.699172,-110.457177,1.585)); +#145496 = LINE('',#145497,#145498); +#145497 = CARTESIAN_POINT('',(115.767688,-110.422919,1.585)); +#145498 = VECTOR('',#145499,1.); +#145499 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#145500 = ORIENTED_EDGE('',*,*,#145501,.T.); +#145501 = EDGE_CURVE('',#145494,#145502,#145504,.T.); +#145502 = VERTEX_POINT('',#145503); +#145503 = CARTESIAN_POINT('',(115.648794,-110.505517,1.585)); +#145504 = LINE('',#145505,#145506); +#145505 = CARTESIAN_POINT('',(115.699172,-110.457177,1.585)); +#145506 = VECTOR('',#145507,1.); +#145507 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#145508 = ORIENTED_EDGE('',*,*,#145509,.T.); +#145509 = EDGE_CURVE('',#145502,#145510,#145512,.T.); +#145510 = VERTEX_POINT('',#145511); +#145511 = CARTESIAN_POINT('',(115.554093,-110.390124,1.585)); +#145512 = CIRCLE('',#145513,7.499996838527E-02); +#145513 = AXIS2_PLACEMENT_3D('',#145514,#145515,#145516); +#145514 = CARTESIAN_POINT('',(115.607126,-110.4431569724,1.585)); +#145515 = DIRECTION('',(0.,0.,-1.)); +#145516 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#145517 = ORIENTED_EDGE('',*,*,#145518,.T.); +#145518 = EDGE_CURVE('',#145510,#145368,#145519,.T.); +#145519 = LINE('',#145520,#145521); +#145520 = CARTESIAN_POINT('',(115.554093,-110.390124,1.585)); +#145521 = VECTOR('',#145522,1.); +#145522 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#145523 = PLANE('',#145524); +#145524 = AXIS2_PLACEMENT_3D('',#145525,#145526,#145527); +#145525 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145526 = DIRECTION('',(0.,0.,1.)); +#145527 = DIRECTION('',(1.,0.,-0.)); +#145528 = SHELL_BASED_SURFACE_MODEL('',(#145529)); +#145529 = OPEN_SHELL('',(#145530)); +#145530 = ADVANCED_FACE('',(#145531),#145690,.T.); +#145531 = FACE_BOUND('',#145532,.F.); +#145532 = EDGE_LOOP('',(#145533,#145544,#145552,#145560,#145568,#145576, + #145584,#145592,#145601,#145609,#145618,#145626,#145634,#145642, + #145651,#145659,#145667,#145675,#145684)); +#145533 = ORIENTED_EDGE('',*,*,#145534,.T.); +#145534 = EDGE_CURVE('',#145535,#145537,#145539,.T.); +#145535 = VERTEX_POINT('',#145536); +#145536 = CARTESIAN_POINT('',(118.668823,-110.328456,1.585)); +#145537 = VERTEX_POINT('',#145538); +#145538 = CARTESIAN_POINT('',(119.178218,-110.337786,1.585)); +#145539 = CIRCLE('',#145540,0.450326844012); +#145540 = AXIS2_PLACEMENT_3D('',#145541,#145542,#145543); +#145541 = CARTESIAN_POINT('',(118.9167200301,-110.7044098919,1.585)); +#145542 = DIRECTION('',(0.,0.,-1.)); +#145543 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#145544 = ORIENTED_EDGE('',*,*,#145545,.T.); +#145545 = EDGE_CURVE('',#145537,#145546,#145548,.T.); +#145546 = VERTEX_POINT('',#145547); +#145547 = CARTESIAN_POINT('',(119.241671,-110.403316,1.585)); +#145548 = LINE('',#145549,#145550); +#145549 = CARTESIAN_POINT('',(119.178218,-110.337786,1.585)); +#145550 = VECTOR('',#145551,1.); +#145551 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#145552 = ORIENTED_EDGE('',*,*,#145553,.T.); +#145553 = EDGE_CURVE('',#145546,#145554,#145556,.T.); +#145554 = VERTEX_POINT('',#145555); +#145555 = CARTESIAN_POINT('',(119.299732,-110.523763,1.585)); +#145556 = LINE('',#145557,#145558); +#145557 = CARTESIAN_POINT('',(119.241671,-110.403316,1.585)); +#145558 = VECTOR('',#145559,1.); +#145559 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#145560 = ORIENTED_EDGE('',*,*,#145561,.T.); +#145561 = EDGE_CURVE('',#145554,#145562,#145564,.T.); +#145562 = VERTEX_POINT('',#145563); +#145563 = CARTESIAN_POINT('',(119.298973,-110.650095,1.585)); +#145564 = LINE('',#145565,#145566); +#145565 = CARTESIAN_POINT('',(119.299732,-110.523763,1.585)); +#145566 = VECTOR('',#145567,1.); +#145567 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#145568 = ORIENTED_EDGE('',*,*,#145569,.T.); +#145569 = EDGE_CURVE('',#145562,#145570,#145572,.T.); +#145570 = VERTEX_POINT('',#145571); +#145571 = CARTESIAN_POINT('',(119.240915,-110.818158,1.585)); +#145572 = LINE('',#145573,#145574); +#145573 = CARTESIAN_POINT('',(119.298973,-110.650095,1.585)); +#145574 = VECTOR('',#145575,1.); +#145575 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#145576 = ORIENTED_EDGE('',*,*,#145577,.T.); +#145577 = EDGE_CURVE('',#145570,#145578,#145580,.T.); +#145578 = VERTEX_POINT('',#145579); +#145579 = CARTESIAN_POINT('',(118.788192,-111.272919,1.585)); +#145580 = LINE('',#145581,#145582); +#145581 = CARTESIAN_POINT('',(119.240915,-110.818158,1.585)); +#145582 = VECTOR('',#145583,1.); +#145583 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#145584 = ORIENTED_EDGE('',*,*,#145585,.T.); +#145585 = EDGE_CURVE('',#145578,#145586,#145588,.T.); +#145586 = VERTEX_POINT('',#145587); +#145587 = CARTESIAN_POINT('',(119.240805,-111.27436,1.585)); +#145588 = LINE('',#145589,#145590); +#145589 = CARTESIAN_POINT('',(118.788192,-111.272919,1.585)); +#145590 = VECTOR('',#145591,1.); +#145591 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#145592 = ORIENTED_EDGE('',*,*,#145593,.T.); +#145593 = EDGE_CURVE('',#145586,#145594,#145596,.T.); +#145594 = VERTEX_POINT('',#145595); +#145595 = CARTESIAN_POINT('',(119.226173,-111.422919,1.585)); +#145596 = CIRCLE('',#145597,7.500006711463E-02); +#145597 = AXIS2_PLACEMENT_3D('',#145598,#145599,#145600); +#145598 = CARTESIAN_POINT('',(119.22617306711,-111.3479189328,1.585)); +#145599 = DIRECTION('',(0.,0.,-1.)); +#145600 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#145601 = ORIENTED_EDGE('',*,*,#145602,.T.); +#145602 = EDGE_CURVE('',#145594,#145603,#145605,.T.); +#145603 = VERTEX_POINT('',#145604); +#145604 = CARTESIAN_POINT('',(118.592494,-111.421478,1.585)); +#145605 = LINE('',#145606,#145607); +#145606 = CARTESIAN_POINT('',(119.226173,-111.422919,1.585)); +#145607 = VECTOR('',#145608,1.); +#145608 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#145609 = ORIENTED_EDGE('',*,*,#145610,.T.); +#145610 = EDGE_CURVE('',#145603,#145611,#145613,.T.); +#145611 = VERTEX_POINT('',#145612); +#145612 = CARTESIAN_POINT('',(118.554093,-111.294886,1.585)); +#145613 = CIRCLE('',#145614,7.500021013108E-02); +#145614 = AXIS2_PLACEMENT_3D('',#145615,#145616,#145617); +#145615 = CARTESIAN_POINT('',(118.6071263167,-111.3479189976,1.585)); +#145616 = DIRECTION('',(0.,0.,-1.)); +#145617 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#145618 = ORIENTED_EDGE('',*,*,#145619,.T.); +#145619 = EDGE_CURVE('',#145611,#145620,#145622,.T.); +#145620 = VERTEX_POINT('',#145621); +#145621 = CARTESIAN_POINT('',(119.113001,-110.735976,1.585)); +#145622 = LINE('',#145623,#145624); +#145623 = CARTESIAN_POINT('',(118.554093,-111.294886,1.585)); +#145624 = VECTOR('',#145625,1.); +#145625 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#145626 = ORIENTED_EDGE('',*,*,#145627,.T.); +#145627 = EDGE_CURVE('',#145620,#145628,#145630,.T.); +#145628 = VERTEX_POINT('',#145629); +#145629 = CARTESIAN_POINT('',(119.151173,-110.621463,1.585)); +#145630 = LINE('',#145631,#145632); +#145631 = CARTESIAN_POINT('',(119.113001,-110.735976,1.585)); +#145632 = VECTOR('',#145633,1.); +#145633 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#145634 = ORIENTED_EDGE('',*,*,#145635,.T.); +#145635 = EDGE_CURVE('',#145628,#145636,#145638,.T.); +#145636 = VERTEX_POINT('',#145637); +#145637 = CARTESIAN_POINT('',(119.151173,-110.5561,1.585)); +#145638 = LINE('',#145639,#145640); +#145639 = CARTESIAN_POINT('',(119.151173,-110.621463,1.585)); +#145640 = VECTOR('',#145641,1.); +#145641 = DIRECTION('',(0.,1.,0.)); +#145642 = ORIENTED_EDGE('',*,*,#145643,.T.); +#145643 = EDGE_CURVE('',#145636,#145644,#145646,.T.); +#145644 = VERTEX_POINT('',#145645); +#145645 = CARTESIAN_POINT('',(119.017992,-110.422919,1.585)); +#145646 = CIRCLE('',#145647,0.18686440374); +#145647 = AXIS2_PLACEMENT_3D('',#145648,#145649,#145650); +#145648 = CARTESIAN_POINT('',(118.970456,-110.603636,1.585)); +#145649 = DIRECTION('',(0.,0.,1.)); +#145650 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#145651 = ORIENTED_EDGE('',*,*,#145652,.T.); +#145652 = EDGE_CURVE('',#145644,#145653,#145655,.T.); +#145653 = VERTEX_POINT('',#145654); +#145654 = CARTESIAN_POINT('',(118.815307,-110.422919,1.585)); +#145655 = LINE('',#145656,#145657); +#145656 = CARTESIAN_POINT('',(119.017992,-110.422919,1.585)); +#145657 = VECTOR('',#145658,1.); +#145658 = DIRECTION('',(-1.,0.,0.)); +#145659 = ORIENTED_EDGE('',*,*,#145660,.T.); +#145660 = EDGE_CURVE('',#145653,#145661,#145663,.T.); +#145661 = VERTEX_POINT('',#145662); +#145662 = CARTESIAN_POINT('',(118.746791,-110.457177,1.585)); +#145663 = LINE('',#145664,#145665); +#145664 = CARTESIAN_POINT('',(118.815307,-110.422919,1.585)); +#145665 = VECTOR('',#145666,1.); +#145666 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#145667 = ORIENTED_EDGE('',*,*,#145668,.T.); +#145668 = EDGE_CURVE('',#145661,#145669,#145671,.T.); +#145669 = VERTEX_POINT('',#145670); +#145670 = CARTESIAN_POINT('',(118.696413,-110.505517,1.585)); +#145671 = LINE('',#145672,#145673); +#145672 = CARTESIAN_POINT('',(118.746791,-110.457177,1.585)); +#145673 = VECTOR('',#145674,1.); +#145674 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#145675 = ORIENTED_EDGE('',*,*,#145676,.T.); +#145676 = EDGE_CURVE('',#145669,#145677,#145679,.T.); +#145677 = VERTEX_POINT('',#145678); +#145678 = CARTESIAN_POINT('',(118.601712,-110.390124,1.585)); +#145679 = CIRCLE('',#145680,7.499996838527E-02); +#145680 = AXIS2_PLACEMENT_3D('',#145681,#145682,#145683); +#145681 = CARTESIAN_POINT('',(118.654745,-110.4431569724,1.585)); +#145682 = DIRECTION('',(0.,0.,-1.)); +#145683 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#145684 = ORIENTED_EDGE('',*,*,#145685,.T.); +#145685 = EDGE_CURVE('',#145677,#145535,#145686,.T.); +#145686 = LINE('',#145687,#145688); +#145687 = CARTESIAN_POINT('',(118.601712,-110.390124,1.585)); +#145688 = VECTOR('',#145689,1.); +#145689 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#145690 = PLANE('',#145691); +#145691 = AXIS2_PLACEMENT_3D('',#145692,#145693,#145694); +#145692 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145693 = DIRECTION('',(0.,0.,1.)); +#145694 = DIRECTION('',(1.,0.,-0.)); +#145695 = SHELL_BASED_SURFACE_MODEL('',(#145696)); +#145696 = OPEN_SHELL('',(#145697)); +#145697 = ADVANCED_FACE('',(#145698),#145832,.T.); +#145698 = FACE_BOUND('',#145699,.F.); +#145699 = EDGE_LOOP('',(#145700,#145710,#145718,#145727,#145735,#145743, + #145752,#145760,#145769,#145777,#145785,#145793,#145801,#145810, + #145818,#145826)); +#145700 = ORIENTED_EDGE('',*,*,#145701,.T.); +#145701 = EDGE_CURVE('',#145702,#145704,#145706,.T.); +#145702 = VERTEX_POINT('',#145703); +#145703 = CARTESIAN_POINT('',(129.839752,-110.294941,1.585)); +#145704 = VERTEX_POINT('',#145705); +#145705 = CARTESIAN_POINT('',(129.878208,-110.27436,1.585)); +#145706 = LINE('',#145707,#145708); +#145707 = CARTESIAN_POINT('',(129.839752,-110.294941,1.585)); +#145708 = VECTOR('',#145709,1.); +#145709 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#145710 = ORIENTED_EDGE('',*,*,#145711,.T.); +#145711 = EDGE_CURVE('',#145704,#145712,#145714,.T.); +#145712 = VERTEX_POINT('',#145713); +#145713 = CARTESIAN_POINT('',(129.900045,-110.27436,1.585)); +#145714 = LINE('',#145715,#145716); +#145715 = CARTESIAN_POINT('',(129.878208,-110.27436,1.585)); +#145716 = VECTOR('',#145717,1.); +#145717 = DIRECTION('',(1.,0.,0.)); +#145718 = ORIENTED_EDGE('',*,*,#145719,.T.); +#145719 = EDGE_CURVE('',#145712,#145720,#145722,.T.); +#145720 = VERTEX_POINT('',#145721); +#145721 = CARTESIAN_POINT('',(129.96784,-110.347919,1.585)); +#145722 = CIRCLE('',#145723,7.216898094227E-02); +#145723 = AXIS2_PLACEMENT_3D('',#145724,#145725,#145726); +#145724 = CARTESIAN_POINT('',(129.89568706389,-110.3463972834,1.585)); +#145725 = DIRECTION('',(0.,0.,-1.)); +#145726 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#145727 = ORIENTED_EDGE('',*,*,#145728,.T.); +#145728 = EDGE_CURVE('',#145720,#145729,#145731,.T.); +#145729 = VERTEX_POINT('',#145730); +#145730 = CARTESIAN_POINT('',(129.96784,-111.272919,1.585)); +#145731 = LINE('',#145732,#145733); +#145732 = CARTESIAN_POINT('',(129.96784,-110.347919,1.585)); +#145733 = VECTOR('',#145734,1.); +#145734 = DIRECTION('',(0.,-1.,0.)); +#145735 = ORIENTED_EDGE('',*,*,#145736,.T.); +#145736 = EDGE_CURVE('',#145729,#145737,#145739,.T.); +#145737 = VERTEX_POINT('',#145738); +#145738 = CARTESIAN_POINT('',(130.193186,-111.27436,1.585)); +#145739 = LINE('',#145740,#145741); +#145740 = CARTESIAN_POINT('',(129.96784,-111.272919,1.585)); +#145741 = VECTOR('',#145742,1.); +#145742 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#145743 = ORIENTED_EDGE('',*,*,#145744,.T.); +#145744 = EDGE_CURVE('',#145737,#145745,#145747,.T.); +#145745 = VERTEX_POINT('',#145746); +#145746 = CARTESIAN_POINT('',(130.178554,-111.422919,1.585)); +#145747 = CIRCLE('',#145748,7.500006711463E-02); +#145748 = AXIS2_PLACEMENT_3D('',#145749,#145750,#145751); +#145749 = CARTESIAN_POINT('',(130.17855406711,-111.3479189328,1.585)); +#145750 = DIRECTION('',(0.,0.,-1.)); +#145751 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#145752 = ORIENTED_EDGE('',*,*,#145753,.T.); +#145753 = EDGE_CURVE('',#145745,#145754,#145756,.T.); +#145754 = VERTEX_POINT('',#145755); +#145755 = CARTESIAN_POINT('',(129.592494,-111.421478,1.585)); +#145756 = LINE('',#145757,#145758); +#145757 = CARTESIAN_POINT('',(130.178554,-111.422919,1.585)); +#145758 = VECTOR('',#145759,1.); +#145759 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#145760 = ORIENTED_EDGE('',*,*,#145761,.T.); +#145761 = EDGE_CURVE('',#145754,#145762,#145764,.T.); +#145762 = VERTEX_POINT('',#145763); +#145763 = CARTESIAN_POINT('',(129.607126,-111.272919,1.585)); +#145764 = CIRCLE('',#145765,7.500006711464E-02); +#145765 = AXIS2_PLACEMENT_3D('',#145766,#145767,#145768); +#145766 = CARTESIAN_POINT('',(129.60712593288,-111.3479190671,1.585)); +#145767 = DIRECTION('',(0.,0.,-1.)); +#145768 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#145769 = ORIENTED_EDGE('',*,*,#145770,.T.); +#145770 = EDGE_CURVE('',#145762,#145771,#145773,.T.); +#145771 = VERTEX_POINT('',#145772); +#145772 = CARTESIAN_POINT('',(129.81784,-111.272919,1.585)); +#145773 = LINE('',#145774,#145775); +#145774 = CARTESIAN_POINT('',(129.607126,-111.272919,1.585)); +#145775 = VECTOR('',#145776,1.); +#145776 = DIRECTION('',(1.,0.,0.)); +#145777 = ORIENTED_EDGE('',*,*,#145778,.T.); +#145778 = EDGE_CURVE('',#145771,#145779,#145781,.T.); +#145779 = VERTEX_POINT('',#145780); +#145780 = CARTESIAN_POINT('',(129.81784,-110.576604,1.585)); +#145781 = LINE('',#145782,#145783); +#145782 = CARTESIAN_POINT('',(129.81784,-111.272919,1.585)); +#145783 = VECTOR('',#145784,1.); +#145784 = DIRECTION('',(0.,1.,0.)); +#145785 = ORIENTED_EDGE('',*,*,#145786,.T.); +#145786 = EDGE_CURVE('',#145779,#145787,#145789,.T.); +#145787 = VERTEX_POINT('',#145788); +#145788 = CARTESIAN_POINT('',(129.742204,-110.649131,1.585)); +#145789 = LINE('',#145790,#145791); +#145790 = CARTESIAN_POINT('',(129.81784,-110.576604,1.585)); +#145791 = VECTOR('',#145792,1.); +#145792 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#145793 = ORIENTED_EDGE('',*,*,#145794,.T.); +#145794 = EDGE_CURVE('',#145787,#145795,#145797,.T.); +#145795 = VERTEX_POINT('',#145796); +#145796 = CARTESIAN_POINT('',(129.626935,-110.70597,1.585)); +#145797 = LINE('',#145798,#145799); +#145798 = CARTESIAN_POINT('',(129.742204,-110.649131,1.585)); +#145799 = VECTOR('',#145800,1.); +#145800 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#145801 = ORIENTED_EDGE('',*,*,#145802,.T.); +#145802 = EDGE_CURVE('',#145795,#145803,#145805,.T.); +#145803 = VERTEX_POINT('',#145804); +#145804 = CARTESIAN_POINT('',(129.573585,-110.566551,1.585)); +#145805 = CIRCLE('',#145806,7.50000527236E-02); +#145806 = AXIS2_PLACEMENT_3D('',#145807,#145808,#145809); +#145807 = CARTESIAN_POINT('',(129.60712555676,-110.6336333297,1.585)); +#145808 = DIRECTION('',(0.,0.,-1.)); +#145809 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#145810 = ORIENTED_EDGE('',*,*,#145811,.T.); +#145811 = EDGE_CURVE('',#145803,#145812,#145814,.T.); +#145812 = VERTEX_POINT('',#145813); +#145813 = CARTESIAN_POINT('',(129.657937,-110.524375,1.585)); +#145814 = LINE('',#145815,#145816); +#145815 = CARTESIAN_POINT('',(129.573585,-110.566551,1.585)); +#145816 = VECTOR('',#145817,1.); +#145817 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#145818 = ORIENTED_EDGE('',*,*,#145819,.T.); +#145819 = EDGE_CURVE('',#145812,#145820,#145822,.T.); +#145820 = VERTEX_POINT('',#145821); +#145821 = CARTESIAN_POINT('',(129.739316,-110.442996,1.585)); +#145822 = LINE('',#145823,#145824); +#145823 = CARTESIAN_POINT('',(129.657937,-110.524375,1.585)); +#145824 = VECTOR('',#145825,1.); +#145825 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#145826 = ORIENTED_EDGE('',*,*,#145827,.T.); +#145827 = EDGE_CURVE('',#145820,#145702,#145828,.T.); +#145828 = LINE('',#145829,#145830); +#145829 = CARTESIAN_POINT('',(129.739316,-110.442996,1.585)); +#145830 = VECTOR('',#145831,1.); +#145831 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#145832 = PLANE('',#145833); +#145833 = AXIS2_PLACEMENT_3D('',#145834,#145835,#145836); +#145834 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145835 = DIRECTION('',(0.,0.,1.)); +#145836 = DIRECTION('',(1.,0.,-0.)); +#145837 = SHELL_BASED_SURFACE_MODEL('',(#145838)); +#145838 = OPEN_SHELL('',(#145839)); +#145839 = ADVANCED_FACE('',(#145840,#145951),#146003,.T.); +#145840 = FACE_BOUND('',#145841,.F.); +#145841 = EDGE_LOOP('',(#145842,#145853,#145861,#145870,#145878,#145887, + #145895,#145903,#145912,#145920,#145928,#145936,#145945)); +#145842 = ORIENTED_EDGE('',*,*,#145843,.T.); +#145843 = EDGE_CURVE('',#145844,#145846,#145848,.T.); +#145844 = VERTEX_POINT('',#145845); +#145845 = CARTESIAN_POINT('',(91.429996,-110.333287,1.585)); +#145846 = VERTEX_POINT('',#145847); +#145847 = CARTESIAN_POINT('',(91.503555,-110.272919,1.585)); +#145848 = CIRCLE('',#145849,7.500074938983E-02); +#145849 = AXIS2_PLACEMENT_3D('',#145850,#145851,#145852); +#145850 = CARTESIAN_POINT('',(91.50355546611,-110.3479197493,1.585)); +#145851 = DIRECTION('',(0.,0.,-1.)); +#145852 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#145853 = ORIENTED_EDGE('',*,*,#145854,.T.); +#145854 = EDGE_CURVE('',#145846,#145855,#145857,.T.); +#145855 = VERTEX_POINT('',#145856); +#145856 = CARTESIAN_POINT('',(91.899139,-110.27436,1.585)); +#145857 = LINE('',#145858,#145859); +#145858 = CARTESIAN_POINT('',(91.503555,-110.272919,1.585)); +#145859 = VECTOR('',#145860,1.); +#145860 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#145861 = ORIENTED_EDGE('',*,*,#145862,.T.); +#145862 = EDGE_CURVE('',#145855,#145863,#145865,.T.); +#145863 = VERTEX_POINT('',#145864); +#145864 = CARTESIAN_POINT('',(92.148542,-110.523763,1.585)); +#145865 = CIRCLE('',#145866,0.347870264855); +#145866 = AXIS2_PLACEMENT_3D('',#145867,#145868,#145869); +#145867 = CARTESIAN_POINT('',(91.811811265028,-110.6110907349,1.585)); +#145868 = DIRECTION('',(0.,0.,-1.)); +#145869 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#145870 = ORIENTED_EDGE('',*,*,#145871,.T.); +#145871 = EDGE_CURVE('',#145863,#145872,#145874,.T.); +#145872 = VERTEX_POINT('',#145873); +#145873 = CARTESIAN_POINT('',(92.14732,-110.701062,1.585)); +#145874 = LINE('',#145875,#145876); +#145875 = CARTESIAN_POINT('',(92.148542,-110.523763,1.585)); +#145876 = VECTOR('',#145877,1.); +#145877 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#145878 = ORIENTED_EDGE('',*,*,#145879,.T.); +#145879 = EDGE_CURVE('',#145872,#145880,#145882,.T.); +#145880 = VERTEX_POINT('',#145881); +#145881 = CARTESIAN_POINT('',(91.899139,-110.945287,1.585)); +#145882 = CIRCLE('',#145883,0.348632345848); +#145883 = AXIS2_PLACEMENT_3D('',#145884,#145885,#145886); +#145884 = CARTESIAN_POINT('',(91.811370194038,-110.6078834593,1.585)); +#145885 = DIRECTION('',(0.,0.,-1.)); +#145886 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#145887 = ORIENTED_EDGE('',*,*,#145888,.T.); +#145888 = EDGE_CURVE('',#145880,#145889,#145891,.T.); +#145889 = VERTEX_POINT('',#145890); +#145890 = CARTESIAN_POINT('',(91.885622,-110.946618,1.585)); +#145891 = LINE('',#145892,#145893); +#145892 = CARTESIAN_POINT('',(91.899139,-110.945287,1.585)); +#145893 = VECTOR('',#145894,1.); +#145894 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#145895 = ORIENTED_EDGE('',*,*,#145896,.T.); +#145896 = EDGE_CURVE('',#145889,#145897,#145899,.T.); +#145897 = VERTEX_POINT('',#145898); +#145898 = CARTESIAN_POINT('',(92.143636,-111.317723,1.585)); +#145899 = LINE('',#145900,#145901); +#145900 = CARTESIAN_POINT('',(91.885622,-110.946618,1.585)); +#145901 = VECTOR('',#145902,1.); +#145902 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#145903 = ORIENTED_EDGE('',*,*,#145904,.T.); +#145904 = EDGE_CURVE('',#145897,#145905,#145907,.T.); +#145905 = VERTEX_POINT('',#145906); +#145906 = CARTESIAN_POINT('',(92.013541,-111.390929,1.585)); +#145907 = CIRCLE('',#145908,7.500005951702E-02); +#145908 = AXIS2_PLACEMENT_3D('',#145909,#145910,#145911); +#145909 = CARTESIAN_POINT('',(92.074983062942,-111.3479187473,1.585)); +#145910 = DIRECTION('',(0.,0.,-1.)); +#145911 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#145912 = ORIENTED_EDGE('',*,*,#145913,.T.); +#145913 = EDGE_CURVE('',#145905,#145914,#145916,.T.); +#145914 = VERTEX_POINT('',#145915); +#145915 = CARTESIAN_POINT('',(91.702601,-110.946728,1.585)); +#145916 = LINE('',#145917,#145918); +#145917 = CARTESIAN_POINT('',(92.013541,-111.390929,1.585)); +#145918 = VECTOR('',#145919,1.); +#145919 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#145920 = ORIENTED_EDGE('',*,*,#145921,.T.); +#145921 = EDGE_CURVE('',#145914,#145922,#145924,.T.); +#145922 = VERTEX_POINT('',#145923); +#145923 = CARTESIAN_POINT('',(91.578555,-110.946728,1.585)); +#145924 = LINE('',#145925,#145926); +#145925 = CARTESIAN_POINT('',(91.702601,-110.946728,1.585)); +#145926 = VECTOR('',#145927,1.); +#145927 = DIRECTION('',(-1.,0.,0.)); +#145928 = ORIENTED_EDGE('',*,*,#145929,.T.); +#145929 = EDGE_CURVE('',#145922,#145930,#145932,.T.); +#145930 = VERTEX_POINT('',#145931); +#145931 = CARTESIAN_POINT('',(91.577114,-111.362551,1.585)); +#145932 = LINE('',#145933,#145934); +#145933 = CARTESIAN_POINT('',(91.578555,-110.946728,1.585)); +#145934 = VECTOR('',#145935,1.); +#145935 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#145936 = ORIENTED_EDGE('',*,*,#145937,.T.); +#145937 = EDGE_CURVE('',#145930,#145938,#145940,.T.); +#145938 = VERTEX_POINT('',#145939); +#145939 = CARTESIAN_POINT('',(91.428555,-111.347919,1.585)); +#145940 = CIRCLE('',#145941,7.500006711463E-02); +#145941 = AXIS2_PLACEMENT_3D('',#145942,#145943,#145944); +#145942 = CARTESIAN_POINT('',(91.503555067115,-111.3479190671,1.585)); +#145943 = DIRECTION('',(-0.,0.,-1.)); +#145944 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#145945 = ORIENTED_EDGE('',*,*,#145946,.T.); +#145946 = EDGE_CURVE('',#145938,#145844,#145947,.T.); +#145947 = LINE('',#145948,#145949); +#145948 = CARTESIAN_POINT('',(91.428555,-111.347919,1.585)); +#145949 = VECTOR('',#145950,1.); +#145950 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#145951 = FACE_BOUND('',#145952,.F.); +#145952 = EDGE_LOOP('',(#145953,#145964,#145972,#145980,#145988,#145997) + ); +#145953 = ORIENTED_EDGE('',*,*,#145954,.T.); +#145954 = EDGE_CURVE('',#145955,#145957,#145959,.T.); +#145955 = VERTEX_POINT('',#145956); +#145956 = CARTESIAN_POINT('',(91.999983,-110.5561,1.585)); +#145957 = VERTEX_POINT('',#145958); +#145958 = CARTESIAN_POINT('',(91.866802,-110.422919,1.585)); +#145959 = CIRCLE('',#145960,0.18686440374); +#145960 = AXIS2_PLACEMENT_3D('',#145961,#145962,#145963); +#145961 = CARTESIAN_POINT('',(91.819266,-110.603636,1.585)); +#145962 = DIRECTION('',(0.,0.,1.)); +#145963 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#145964 = ORIENTED_EDGE('',*,*,#145965,.T.); +#145965 = EDGE_CURVE('',#145957,#145966,#145968,.T.); +#145966 = VERTEX_POINT('',#145967); +#145967 = CARTESIAN_POINT('',(91.578555,-110.422919,1.585)); +#145968 = LINE('',#145969,#145970); +#145969 = CARTESIAN_POINT('',(91.866802,-110.422919,1.585)); +#145970 = VECTOR('',#145971,1.); +#145971 = DIRECTION('',(-1.,0.,0.)); +#145972 = ORIENTED_EDGE('',*,*,#145973,.T.); +#145973 = EDGE_CURVE('',#145966,#145974,#145976,.T.); +#145974 = VERTEX_POINT('',#145975); +#145975 = CARTESIAN_POINT('',(91.578555,-110.796728,1.585)); +#145976 = LINE('',#145977,#145978); +#145977 = CARTESIAN_POINT('',(91.578555,-110.422919,1.585)); +#145978 = VECTOR('',#145979,1.); +#145979 = DIRECTION('',(0.,-1.,0.)); +#145980 = ORIENTED_EDGE('',*,*,#145981,.T.); +#145981 = EDGE_CURVE('',#145974,#145982,#145984,.T.); +#145982 = VERTEX_POINT('',#145983); +#145983 = CARTESIAN_POINT('',(91.866802,-110.796728,1.585)); +#145984 = LINE('',#145985,#145986); +#145985 = CARTESIAN_POINT('',(91.578555,-110.796728,1.585)); +#145986 = VECTOR('',#145987,1.); +#145987 = DIRECTION('',(1.,0.,0.)); +#145988 = ORIENTED_EDGE('',*,*,#145989,.T.); +#145989 = EDGE_CURVE('',#145982,#145990,#145992,.T.); +#145990 = VERTEX_POINT('',#145991); +#145991 = CARTESIAN_POINT('',(91.999983,-110.663547,1.585)); +#145992 = CIRCLE('',#145993,0.18686440374); +#145993 = AXIS2_PLACEMENT_3D('',#145994,#145995,#145996); +#145994 = CARTESIAN_POINT('',(91.819266,-110.616011,1.585)); +#145995 = DIRECTION('',(0.,0.,1.)); +#145996 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#145997 = ORIENTED_EDGE('',*,*,#145998,.T.); +#145998 = EDGE_CURVE('',#145990,#145955,#145999,.T.); +#145999 = LINE('',#146000,#146001); +#146000 = CARTESIAN_POINT('',(91.999983,-110.663547,1.585)); +#146001 = VECTOR('',#146002,1.); +#146002 = DIRECTION('',(0.,1.,0.)); +#146003 = PLANE('',#146004); +#146004 = AXIS2_PLACEMENT_3D('',#146005,#146006,#146007); +#146005 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146006 = DIRECTION('',(0.,0.,1.)); +#146007 = DIRECTION('',(1.,0.,-0.)); +#146008 = SHELL_BASED_SURFACE_MODEL('',(#146009)); +#146009 = OPEN_SHELL('',(#146010)); +#146010 = ADVANCED_FACE('',(#146011,#146122),#146174,.T.); +#146011 = FACE_BOUND('',#146012,.F.); +#146012 = EDGE_LOOP('',(#146013,#146024,#146032,#146041,#146049,#146058, + #146066,#146074,#146083,#146091,#146099,#146107,#146116)); +#146013 = ORIENTED_EDGE('',*,*,#146014,.T.); +#146014 = EDGE_CURVE('',#146015,#146017,#146019,.T.); +#146015 = VERTEX_POINT('',#146016); +#146016 = CARTESIAN_POINT('',(93.938329,-110.333287,1.585)); +#146017 = VERTEX_POINT('',#146018); +#146018 = CARTESIAN_POINT('',(94.011888,-110.272919,1.585)); +#146019 = CIRCLE('',#146020,7.500074938988E-02); +#146020 = AXIS2_PLACEMENT_3D('',#146021,#146022,#146023); +#146021 = CARTESIAN_POINT('',(94.01188846611,-110.3479197493,1.585)); +#146022 = DIRECTION('',(0.,0.,-1.)); +#146023 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146024 = ORIENTED_EDGE('',*,*,#146025,.T.); +#146025 = EDGE_CURVE('',#146017,#146026,#146028,.T.); +#146026 = VERTEX_POINT('',#146027); +#146027 = CARTESIAN_POINT('',(94.407472,-110.27436,1.585)); +#146028 = LINE('',#146029,#146030); +#146029 = CARTESIAN_POINT('',(94.011888,-110.272919,1.585)); +#146030 = VECTOR('',#146031,1.); +#146031 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146032 = ORIENTED_EDGE('',*,*,#146033,.T.); +#146033 = EDGE_CURVE('',#146026,#146034,#146036,.T.); +#146034 = VERTEX_POINT('',#146035); +#146035 = CARTESIAN_POINT('',(94.656875,-110.523763,1.585)); +#146036 = CIRCLE('',#146037,0.347870264855); +#146037 = AXIS2_PLACEMENT_3D('',#146038,#146039,#146040); +#146038 = CARTESIAN_POINT('',(94.320144265028,-110.6110907349,1.585)); +#146039 = DIRECTION('',(0.,0.,-1.)); +#146040 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146041 = ORIENTED_EDGE('',*,*,#146042,.T.); +#146042 = EDGE_CURVE('',#146034,#146043,#146045,.T.); +#146043 = VERTEX_POINT('',#146044); +#146044 = CARTESIAN_POINT('',(94.655653,-110.701062,1.585)); +#146045 = LINE('',#146046,#146047); +#146046 = CARTESIAN_POINT('',(94.656875,-110.523763,1.585)); +#146047 = VECTOR('',#146048,1.); +#146048 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146049 = ORIENTED_EDGE('',*,*,#146050,.T.); +#146050 = EDGE_CURVE('',#146043,#146051,#146053,.T.); +#146051 = VERTEX_POINT('',#146052); +#146052 = CARTESIAN_POINT('',(94.407472,-110.945287,1.585)); +#146053 = CIRCLE('',#146054,0.348632345848); +#146054 = AXIS2_PLACEMENT_3D('',#146055,#146056,#146057); +#146055 = CARTESIAN_POINT('',(94.319703194037,-110.6078834593,1.585)); +#146056 = DIRECTION('',(0.,0.,-1.)); +#146057 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146058 = ORIENTED_EDGE('',*,*,#146059,.T.); +#146059 = EDGE_CURVE('',#146051,#146060,#146062,.T.); +#146060 = VERTEX_POINT('',#146061); +#146061 = CARTESIAN_POINT('',(94.393955,-110.946618,1.585)); +#146062 = LINE('',#146063,#146064); +#146063 = CARTESIAN_POINT('',(94.407472,-110.945287,1.585)); +#146064 = VECTOR('',#146065,1.); +#146065 = DIRECTION('',(-0.995186940545,-9.799465990037E-02,0.)); +#146066 = ORIENTED_EDGE('',*,*,#146067,.T.); +#146067 = EDGE_CURVE('',#146060,#146068,#146070,.T.); +#146068 = VERTEX_POINT('',#146069); +#146069 = CARTESIAN_POINT('',(94.651969,-111.317723,1.585)); +#146070 = LINE('',#146071,#146072); +#146071 = CARTESIAN_POINT('',(94.393955,-110.946618,1.585)); +#146072 = VECTOR('',#146073,1.); +#146073 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146074 = ORIENTED_EDGE('',*,*,#146075,.T.); +#146075 = EDGE_CURVE('',#146068,#146076,#146078,.T.); +#146076 = VERTEX_POINT('',#146077); +#146077 = CARTESIAN_POINT('',(94.521874,-111.390929,1.585)); +#146078 = CIRCLE('',#146079,7.500005951702E-02); +#146079 = AXIS2_PLACEMENT_3D('',#146080,#146081,#146082); +#146080 = CARTESIAN_POINT('',(94.583316062942,-111.3479187473,1.585)); +#146081 = DIRECTION('',(0.,0.,-1.)); +#146082 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146083 = ORIENTED_EDGE('',*,*,#146084,.T.); +#146084 = EDGE_CURVE('',#146076,#146085,#146087,.T.); +#146085 = VERTEX_POINT('',#146086); +#146086 = CARTESIAN_POINT('',(94.210934,-110.946728,1.585)); +#146087 = LINE('',#146088,#146089); +#146088 = CARTESIAN_POINT('',(94.521874,-111.390929,1.585)); +#146089 = VECTOR('',#146090,1.); +#146090 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146091 = ORIENTED_EDGE('',*,*,#146092,.T.); +#146092 = EDGE_CURVE('',#146085,#146093,#146095,.T.); +#146093 = VERTEX_POINT('',#146094); +#146094 = CARTESIAN_POINT('',(94.086888,-110.946728,1.585)); +#146095 = LINE('',#146096,#146097); +#146096 = CARTESIAN_POINT('',(94.210934,-110.946728,1.585)); +#146097 = VECTOR('',#146098,1.); +#146098 = DIRECTION('',(-1.,0.,0.)); +#146099 = ORIENTED_EDGE('',*,*,#146100,.T.); +#146100 = EDGE_CURVE('',#146093,#146101,#146103,.T.); +#146101 = VERTEX_POINT('',#146102); +#146102 = CARTESIAN_POINT('',(94.085447,-111.362551,1.585)); +#146103 = LINE('',#146104,#146105); +#146104 = CARTESIAN_POINT('',(94.086888,-110.946728,1.585)); +#146105 = VECTOR('',#146106,1.); +#146106 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146107 = ORIENTED_EDGE('',*,*,#146108,.T.); +#146108 = EDGE_CURVE('',#146101,#146109,#146111,.T.); +#146109 = VERTEX_POINT('',#146110); +#146110 = CARTESIAN_POINT('',(93.936888,-111.347919,1.585)); +#146111 = CIRCLE('',#146112,7.500006711464E-02); +#146112 = AXIS2_PLACEMENT_3D('',#146113,#146114,#146115); +#146113 = CARTESIAN_POINT('',(94.011888067115,-111.3479190671,1.585)); +#146114 = DIRECTION('',(-0.,0.,-1.)); +#146115 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146116 = ORIENTED_EDGE('',*,*,#146117,.T.); +#146117 = EDGE_CURVE('',#146109,#146015,#146118,.T.); +#146118 = LINE('',#146119,#146120); +#146119 = CARTESIAN_POINT('',(93.936888,-111.347919,1.585)); +#146120 = VECTOR('',#146121,1.); +#146121 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146122 = FACE_BOUND('',#146123,.F.); +#146123 = EDGE_LOOP('',(#146124,#146135,#146143,#146151,#146159,#146168) + ); +#146124 = ORIENTED_EDGE('',*,*,#146125,.T.); +#146125 = EDGE_CURVE('',#146126,#146128,#146130,.T.); +#146126 = VERTEX_POINT('',#146127); +#146127 = CARTESIAN_POINT('',(94.508316,-110.5561,1.585)); +#146128 = VERTEX_POINT('',#146129); +#146129 = CARTESIAN_POINT('',(94.375135,-110.422919,1.585)); +#146130 = CIRCLE('',#146131,0.18686440374); +#146131 = AXIS2_PLACEMENT_3D('',#146132,#146133,#146134); +#146132 = CARTESIAN_POINT('',(94.327599,-110.603636,1.585)); +#146133 = DIRECTION('',(0.,0.,1.)); +#146134 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146135 = ORIENTED_EDGE('',*,*,#146136,.T.); +#146136 = EDGE_CURVE('',#146128,#146137,#146139,.T.); +#146137 = VERTEX_POINT('',#146138); +#146138 = CARTESIAN_POINT('',(94.086888,-110.422919,1.585)); +#146139 = LINE('',#146140,#146141); +#146140 = CARTESIAN_POINT('',(94.375135,-110.422919,1.585)); +#146141 = VECTOR('',#146142,1.); +#146142 = DIRECTION('',(-1.,0.,0.)); +#146143 = ORIENTED_EDGE('',*,*,#146144,.T.); +#146144 = EDGE_CURVE('',#146137,#146145,#146147,.T.); +#146145 = VERTEX_POINT('',#146146); +#146146 = CARTESIAN_POINT('',(94.086888,-110.796728,1.585)); +#146147 = LINE('',#146148,#146149); +#146148 = CARTESIAN_POINT('',(94.086888,-110.422919,1.585)); +#146149 = VECTOR('',#146150,1.); +#146150 = DIRECTION('',(0.,-1.,0.)); +#146151 = ORIENTED_EDGE('',*,*,#146152,.T.); +#146152 = EDGE_CURVE('',#146145,#146153,#146155,.T.); +#146153 = VERTEX_POINT('',#146154); +#146154 = CARTESIAN_POINT('',(94.375135,-110.796728,1.585)); +#146155 = LINE('',#146156,#146157); +#146156 = CARTESIAN_POINT('',(94.086888,-110.796728,1.585)); +#146157 = VECTOR('',#146158,1.); +#146158 = DIRECTION('',(1.,0.,0.)); +#146159 = ORIENTED_EDGE('',*,*,#146160,.T.); +#146160 = EDGE_CURVE('',#146153,#146161,#146163,.T.); +#146161 = VERTEX_POINT('',#146162); +#146162 = CARTESIAN_POINT('',(94.508316,-110.663547,1.585)); +#146163 = CIRCLE('',#146164,0.18686440374); +#146164 = AXIS2_PLACEMENT_3D('',#146165,#146166,#146167); +#146165 = CARTESIAN_POINT('',(94.327599,-110.616011,1.585)); +#146166 = DIRECTION('',(0.,0.,1.)); +#146167 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146168 = ORIENTED_EDGE('',*,*,#146169,.T.); +#146169 = EDGE_CURVE('',#146161,#146126,#146170,.T.); +#146170 = LINE('',#146171,#146172); +#146171 = CARTESIAN_POINT('',(94.508316,-110.663547,1.585)); +#146172 = VECTOR('',#146173,1.); +#146173 = DIRECTION('',(0.,1.,0.)); +#146174 = PLANE('',#146175); +#146175 = AXIS2_PLACEMENT_3D('',#146176,#146177,#146178); +#146176 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146177 = DIRECTION('',(0.,0.,1.)); +#146178 = DIRECTION('',(1.,0.,-0.)); +#146179 = SHELL_BASED_SURFACE_MODEL('',(#146180)); +#146180 = OPEN_SHELL('',(#146181)); +#146181 = ADVANCED_FACE('',(#146182,#146293),#146345,.T.); +#146182 = FACE_BOUND('',#146183,.F.); +#146183 = EDGE_LOOP('',(#146184,#146195,#146203,#146212,#146220,#146229, + #146237,#146245,#146254,#146262,#146270,#146278,#146287)); +#146184 = ORIENTED_EDGE('',*,*,#146185,.T.); +#146185 = EDGE_CURVE('',#146186,#146188,#146190,.T.); +#146186 = VERTEX_POINT('',#146187); +#146187 = CARTESIAN_POINT('',(97.929996,-110.333287,1.585)); +#146188 = VERTEX_POINT('',#146189); +#146189 = CARTESIAN_POINT('',(98.003555,-110.272919,1.585)); +#146190 = CIRCLE('',#146191,7.500074938983E-02); +#146191 = AXIS2_PLACEMENT_3D('',#146192,#146193,#146194); +#146192 = CARTESIAN_POINT('',(98.00355546611,-110.3479197493,1.585)); +#146193 = DIRECTION('',(0.,0.,-1.)); +#146194 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#146195 = ORIENTED_EDGE('',*,*,#146196,.T.); +#146196 = EDGE_CURVE('',#146188,#146197,#146199,.T.); +#146197 = VERTEX_POINT('',#146198); +#146198 = CARTESIAN_POINT('',(98.399139,-110.27436,1.585)); +#146199 = LINE('',#146200,#146201); +#146200 = CARTESIAN_POINT('',(98.003555,-110.272919,1.585)); +#146201 = VECTOR('',#146202,1.); +#146202 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146203 = ORIENTED_EDGE('',*,*,#146204,.T.); +#146204 = EDGE_CURVE('',#146197,#146205,#146207,.T.); +#146205 = VERTEX_POINT('',#146206); +#146206 = CARTESIAN_POINT('',(98.648542,-110.523763,1.585)); +#146207 = CIRCLE('',#146208,0.347870264855); +#146208 = AXIS2_PLACEMENT_3D('',#146209,#146210,#146211); +#146209 = CARTESIAN_POINT('',(98.311811265028,-110.6110907349,1.585)); +#146210 = DIRECTION('',(0.,0.,-1.)); +#146211 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146212 = ORIENTED_EDGE('',*,*,#146213,.T.); +#146213 = EDGE_CURVE('',#146205,#146214,#146216,.T.); +#146214 = VERTEX_POINT('',#146215); +#146215 = CARTESIAN_POINT('',(98.64732,-110.701062,1.585)); +#146216 = LINE('',#146217,#146218); +#146217 = CARTESIAN_POINT('',(98.648542,-110.523763,1.585)); +#146218 = VECTOR('',#146219,1.); +#146219 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#146220 = ORIENTED_EDGE('',*,*,#146221,.T.); +#146221 = EDGE_CURVE('',#146214,#146222,#146224,.T.); +#146222 = VERTEX_POINT('',#146223); +#146223 = CARTESIAN_POINT('',(98.399139,-110.945287,1.585)); +#146224 = CIRCLE('',#146225,0.348632345848); +#146225 = AXIS2_PLACEMENT_3D('',#146226,#146227,#146228); +#146226 = CARTESIAN_POINT('',(98.311370194038,-110.6078834593,1.585)); +#146227 = DIRECTION('',(0.,0.,-1.)); +#146228 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146229 = ORIENTED_EDGE('',*,*,#146230,.T.); +#146230 = EDGE_CURVE('',#146222,#146231,#146233,.T.); +#146231 = VERTEX_POINT('',#146232); +#146232 = CARTESIAN_POINT('',(98.385622,-110.946618,1.585)); +#146233 = LINE('',#146234,#146235); +#146234 = CARTESIAN_POINT('',(98.399139,-110.945287,1.585)); +#146235 = VECTOR('',#146236,1.); +#146236 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146237 = ORIENTED_EDGE('',*,*,#146238,.T.); +#146238 = EDGE_CURVE('',#146231,#146239,#146241,.T.); +#146239 = VERTEX_POINT('',#146240); +#146240 = CARTESIAN_POINT('',(98.643636,-111.317723,1.585)); +#146241 = LINE('',#146242,#146243); +#146242 = CARTESIAN_POINT('',(98.385622,-110.946618,1.585)); +#146243 = VECTOR('',#146244,1.); +#146244 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146245 = ORIENTED_EDGE('',*,*,#146246,.T.); +#146246 = EDGE_CURVE('',#146239,#146247,#146249,.T.); +#146247 = VERTEX_POINT('',#146248); +#146248 = CARTESIAN_POINT('',(98.513541,-111.390929,1.585)); +#146249 = CIRCLE('',#146250,7.500005951702E-02); +#146250 = AXIS2_PLACEMENT_3D('',#146251,#146252,#146253); +#146251 = CARTESIAN_POINT('',(98.574983062942,-111.3479187473,1.585)); +#146252 = DIRECTION('',(0.,0.,-1.)); +#146253 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146254 = ORIENTED_EDGE('',*,*,#146255,.T.); +#146255 = EDGE_CURVE('',#146247,#146256,#146258,.T.); +#146256 = VERTEX_POINT('',#146257); +#146257 = CARTESIAN_POINT('',(98.202601,-110.946728,1.585)); +#146258 = LINE('',#146259,#146260); +#146259 = CARTESIAN_POINT('',(98.513541,-111.390929,1.585)); +#146260 = VECTOR('',#146261,1.); +#146261 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146262 = ORIENTED_EDGE('',*,*,#146263,.T.); +#146263 = EDGE_CURVE('',#146256,#146264,#146266,.T.); +#146264 = VERTEX_POINT('',#146265); +#146265 = CARTESIAN_POINT('',(98.078555,-110.946728,1.585)); +#146266 = LINE('',#146267,#146268); +#146267 = CARTESIAN_POINT('',(98.202601,-110.946728,1.585)); +#146268 = VECTOR('',#146269,1.); +#146269 = DIRECTION('',(-1.,0.,0.)); +#146270 = ORIENTED_EDGE('',*,*,#146271,.T.); +#146271 = EDGE_CURVE('',#146264,#146272,#146274,.T.); +#146272 = VERTEX_POINT('',#146273); +#146273 = CARTESIAN_POINT('',(98.077114,-111.362551,1.585)); +#146274 = LINE('',#146275,#146276); +#146275 = CARTESIAN_POINT('',(98.078555,-110.946728,1.585)); +#146276 = VECTOR('',#146277,1.); +#146277 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146278 = ORIENTED_EDGE('',*,*,#146279,.T.); +#146279 = EDGE_CURVE('',#146272,#146280,#146282,.T.); +#146280 = VERTEX_POINT('',#146281); +#146281 = CARTESIAN_POINT('',(97.928555,-111.347919,1.585)); +#146282 = CIRCLE('',#146283,7.500006711463E-02); +#146283 = AXIS2_PLACEMENT_3D('',#146284,#146285,#146286); +#146284 = CARTESIAN_POINT('',(98.003555067115,-111.3479190671,1.585)); +#146285 = DIRECTION('',(-0.,0.,-1.)); +#146286 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146287 = ORIENTED_EDGE('',*,*,#146288,.T.); +#146288 = EDGE_CURVE('',#146280,#146186,#146289,.T.); +#146289 = LINE('',#146290,#146291); +#146290 = CARTESIAN_POINT('',(97.928555,-111.347919,1.585)); +#146291 = VECTOR('',#146292,1.); +#146292 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146293 = FACE_BOUND('',#146294,.F.); +#146294 = EDGE_LOOP('',(#146295,#146306,#146314,#146322,#146330,#146339) + ); +#146295 = ORIENTED_EDGE('',*,*,#146296,.T.); +#146296 = EDGE_CURVE('',#146297,#146299,#146301,.T.); +#146297 = VERTEX_POINT('',#146298); +#146298 = CARTESIAN_POINT('',(98.499983,-110.5561,1.585)); +#146299 = VERTEX_POINT('',#146300); +#146300 = CARTESIAN_POINT('',(98.366802,-110.422919,1.585)); +#146301 = CIRCLE('',#146302,0.18686440374); +#146302 = AXIS2_PLACEMENT_3D('',#146303,#146304,#146305); +#146303 = CARTESIAN_POINT('',(98.319266,-110.603636,1.585)); +#146304 = DIRECTION('',(0.,0.,1.)); +#146305 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146306 = ORIENTED_EDGE('',*,*,#146307,.T.); +#146307 = EDGE_CURVE('',#146299,#146308,#146310,.T.); +#146308 = VERTEX_POINT('',#146309); +#146309 = CARTESIAN_POINT('',(98.078555,-110.422919,1.585)); +#146310 = LINE('',#146311,#146312); +#146311 = CARTESIAN_POINT('',(98.366802,-110.422919,1.585)); +#146312 = VECTOR('',#146313,1.); +#146313 = DIRECTION('',(-1.,0.,0.)); +#146314 = ORIENTED_EDGE('',*,*,#146315,.T.); +#146315 = EDGE_CURVE('',#146308,#146316,#146318,.T.); +#146316 = VERTEX_POINT('',#146317); +#146317 = CARTESIAN_POINT('',(98.078555,-110.796728,1.585)); +#146318 = LINE('',#146319,#146320); +#146319 = CARTESIAN_POINT('',(98.078555,-110.422919,1.585)); +#146320 = VECTOR('',#146321,1.); +#146321 = DIRECTION('',(0.,-1.,0.)); +#146322 = ORIENTED_EDGE('',*,*,#146323,.T.); +#146323 = EDGE_CURVE('',#146316,#146324,#146326,.T.); +#146324 = VERTEX_POINT('',#146325); +#146325 = CARTESIAN_POINT('',(98.366802,-110.796728,1.585)); +#146326 = LINE('',#146327,#146328); +#146327 = CARTESIAN_POINT('',(98.078555,-110.796728,1.585)); +#146328 = VECTOR('',#146329,1.); +#146329 = DIRECTION('',(1.,0.,0.)); +#146330 = ORIENTED_EDGE('',*,*,#146331,.T.); +#146331 = EDGE_CURVE('',#146324,#146332,#146334,.T.); +#146332 = VERTEX_POINT('',#146333); +#146333 = CARTESIAN_POINT('',(98.499983,-110.663547,1.585)); +#146334 = CIRCLE('',#146335,0.18686440374); +#146335 = AXIS2_PLACEMENT_3D('',#146336,#146337,#146338); +#146336 = CARTESIAN_POINT('',(98.319266,-110.616011,1.585)); +#146337 = DIRECTION('',(0.,0.,1.)); +#146338 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146339 = ORIENTED_EDGE('',*,*,#146340,.T.); +#146340 = EDGE_CURVE('',#146332,#146297,#146341,.T.); +#146341 = LINE('',#146342,#146343); +#146342 = CARTESIAN_POINT('',(98.499983,-110.663547,1.585)); +#146343 = VECTOR('',#146344,1.); +#146344 = DIRECTION('',(0.,1.,0.)); +#146345 = PLANE('',#146346); +#146346 = AXIS2_PLACEMENT_3D('',#146347,#146348,#146349); +#146347 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146348 = DIRECTION('',(0.,0.,1.)); +#146349 = DIRECTION('',(1.,0.,-0.)); +#146350 = SHELL_BASED_SURFACE_MODEL('',(#146351)); +#146351 = OPEN_SHELL('',(#146352)); +#146352 = ADVANCED_FACE('',(#146353,#146464),#146516,.T.); +#146353 = FACE_BOUND('',#146354,.F.); +#146354 = EDGE_LOOP('',(#146355,#146366,#146374,#146383,#146391,#146400, + #146408,#146416,#146425,#146433,#146441,#146449,#146458)); +#146355 = ORIENTED_EDGE('',*,*,#146356,.T.); +#146356 = EDGE_CURVE('',#146357,#146359,#146361,.T.); +#146357 = VERTEX_POINT('',#146358); +#146358 = CARTESIAN_POINT('',(102.104996,-110.333287,1.585)); +#146359 = VERTEX_POINT('',#146360); +#146360 = CARTESIAN_POINT('',(102.178555,-110.272919,1.585)); +#146361 = CIRCLE('',#146362,7.500074938989E-02); +#146362 = AXIS2_PLACEMENT_3D('',#146363,#146364,#146365); +#146363 = CARTESIAN_POINT('',(102.17855546611,-110.3479197493,1.585)); +#146364 = DIRECTION('',(0.,0.,-1.)); +#146365 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146366 = ORIENTED_EDGE('',*,*,#146367,.T.); +#146367 = EDGE_CURVE('',#146359,#146368,#146370,.T.); +#146368 = VERTEX_POINT('',#146369); +#146369 = CARTESIAN_POINT('',(102.574139,-110.27436,1.585)); +#146370 = LINE('',#146371,#146372); +#146371 = CARTESIAN_POINT('',(102.178555,-110.272919,1.585)); +#146372 = VECTOR('',#146373,1.); +#146373 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146374 = ORIENTED_EDGE('',*,*,#146375,.T.); +#146375 = EDGE_CURVE('',#146368,#146376,#146378,.T.); +#146376 = VERTEX_POINT('',#146377); +#146377 = CARTESIAN_POINT('',(102.823542,-110.523763,1.585)); +#146378 = CIRCLE('',#146379,0.347870264855); +#146379 = AXIS2_PLACEMENT_3D('',#146380,#146381,#146382); +#146380 = CARTESIAN_POINT('',(102.48681126502,-110.6110907349,1.585)); +#146381 = DIRECTION('',(0.,0.,-1.)); +#146382 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146383 = ORIENTED_EDGE('',*,*,#146384,.T.); +#146384 = EDGE_CURVE('',#146376,#146385,#146387,.T.); +#146385 = VERTEX_POINT('',#146386); +#146386 = CARTESIAN_POINT('',(102.82232,-110.701062,1.585)); +#146387 = LINE('',#146388,#146389); +#146388 = CARTESIAN_POINT('',(102.823542,-110.523763,1.585)); +#146389 = VECTOR('',#146390,1.); +#146390 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146391 = ORIENTED_EDGE('',*,*,#146392,.T.); +#146392 = EDGE_CURVE('',#146385,#146393,#146395,.T.); +#146393 = VERTEX_POINT('',#146394); +#146394 = CARTESIAN_POINT('',(102.574139,-110.945287,1.585)); +#146395 = CIRCLE('',#146396,0.348632345849); +#146396 = AXIS2_PLACEMENT_3D('',#146397,#146398,#146399); +#146397 = CARTESIAN_POINT('',(102.48637019403,-110.6078834593,1.585)); +#146398 = DIRECTION('',(0.,0.,-1.)); +#146399 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146400 = ORIENTED_EDGE('',*,*,#146401,.T.); +#146401 = EDGE_CURVE('',#146393,#146402,#146404,.T.); +#146402 = VERTEX_POINT('',#146403); +#146403 = CARTESIAN_POINT('',(102.560622,-110.946618,1.585)); +#146404 = LINE('',#146405,#146406); +#146405 = CARTESIAN_POINT('',(102.574139,-110.945287,1.585)); +#146406 = VECTOR('',#146407,1.); +#146407 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146408 = ORIENTED_EDGE('',*,*,#146409,.T.); +#146409 = EDGE_CURVE('',#146402,#146410,#146412,.T.); +#146410 = VERTEX_POINT('',#146411); +#146411 = CARTESIAN_POINT('',(102.818636,-111.317723,1.585)); +#146412 = LINE('',#146413,#146414); +#146413 = CARTESIAN_POINT('',(102.560622,-110.946618,1.585)); +#146414 = VECTOR('',#146415,1.); +#146415 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146416 = ORIENTED_EDGE('',*,*,#146417,.T.); +#146417 = EDGE_CURVE('',#146410,#146418,#146420,.T.); +#146418 = VERTEX_POINT('',#146419); +#146419 = CARTESIAN_POINT('',(102.688541,-111.390929,1.585)); +#146420 = CIRCLE('',#146421,7.500005951702E-02); +#146421 = AXIS2_PLACEMENT_3D('',#146422,#146423,#146424); +#146422 = CARTESIAN_POINT('',(102.74998306294,-111.3479187473,1.585)); +#146423 = DIRECTION('',(0.,0.,-1.)); +#146424 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146425 = ORIENTED_EDGE('',*,*,#146426,.T.); +#146426 = EDGE_CURVE('',#146418,#146427,#146429,.T.); +#146427 = VERTEX_POINT('',#146428); +#146428 = CARTESIAN_POINT('',(102.377601,-110.946728,1.585)); +#146429 = LINE('',#146430,#146431); +#146430 = CARTESIAN_POINT('',(102.688541,-111.390929,1.585)); +#146431 = VECTOR('',#146432,1.); +#146432 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146433 = ORIENTED_EDGE('',*,*,#146434,.T.); +#146434 = EDGE_CURVE('',#146427,#146435,#146437,.T.); +#146435 = VERTEX_POINT('',#146436); +#146436 = CARTESIAN_POINT('',(102.253555,-110.946728,1.585)); +#146437 = LINE('',#146438,#146439); +#146438 = CARTESIAN_POINT('',(102.377601,-110.946728,1.585)); +#146439 = VECTOR('',#146440,1.); +#146440 = DIRECTION('',(-1.,0.,0.)); +#146441 = ORIENTED_EDGE('',*,*,#146442,.T.); +#146442 = EDGE_CURVE('',#146435,#146443,#146445,.T.); +#146443 = VERTEX_POINT('',#146444); +#146444 = CARTESIAN_POINT('',(102.252114,-111.362551,1.585)); +#146445 = LINE('',#146446,#146447); +#146446 = CARTESIAN_POINT('',(102.253555,-110.946728,1.585)); +#146447 = VECTOR('',#146448,1.); +#146448 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146449 = ORIENTED_EDGE('',*,*,#146450,.T.); +#146450 = EDGE_CURVE('',#146443,#146451,#146453,.T.); +#146451 = VERTEX_POINT('',#146452); +#146452 = CARTESIAN_POINT('',(102.103555,-111.347919,1.585)); +#146453 = CIRCLE('',#146454,7.500006711464E-02); +#146454 = AXIS2_PLACEMENT_3D('',#146455,#146456,#146457); +#146455 = CARTESIAN_POINT('',(102.17855506711,-111.3479190671,1.585)); +#146456 = DIRECTION('',(-0.,0.,-1.)); +#146457 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146458 = ORIENTED_EDGE('',*,*,#146459,.T.); +#146459 = EDGE_CURVE('',#146451,#146357,#146460,.T.); +#146460 = LINE('',#146461,#146462); +#146461 = CARTESIAN_POINT('',(102.103555,-111.347919,1.585)); +#146462 = VECTOR('',#146463,1.); +#146463 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146464 = FACE_BOUND('',#146465,.F.); +#146465 = EDGE_LOOP('',(#146466,#146477,#146485,#146493,#146501,#146510) + ); +#146466 = ORIENTED_EDGE('',*,*,#146467,.T.); +#146467 = EDGE_CURVE('',#146468,#146470,#146472,.T.); +#146468 = VERTEX_POINT('',#146469); +#146469 = CARTESIAN_POINT('',(102.674983,-110.5561,1.585)); +#146470 = VERTEX_POINT('',#146471); +#146471 = CARTESIAN_POINT('',(102.541802,-110.422919,1.585)); +#146472 = CIRCLE('',#146473,0.18686440374); +#146473 = AXIS2_PLACEMENT_3D('',#146474,#146475,#146476); +#146474 = CARTESIAN_POINT('',(102.494266,-110.603636,1.585)); +#146475 = DIRECTION('',(0.,0.,1.)); +#146476 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146477 = ORIENTED_EDGE('',*,*,#146478,.T.); +#146478 = EDGE_CURVE('',#146470,#146479,#146481,.T.); +#146479 = VERTEX_POINT('',#146480); +#146480 = CARTESIAN_POINT('',(102.253555,-110.422919,1.585)); +#146481 = LINE('',#146482,#146483); +#146482 = CARTESIAN_POINT('',(102.541802,-110.422919,1.585)); +#146483 = VECTOR('',#146484,1.); +#146484 = DIRECTION('',(-1.,0.,0.)); +#146485 = ORIENTED_EDGE('',*,*,#146486,.T.); +#146486 = EDGE_CURVE('',#146479,#146487,#146489,.T.); +#146487 = VERTEX_POINT('',#146488); +#146488 = CARTESIAN_POINT('',(102.253555,-110.796728,1.585)); +#146489 = LINE('',#146490,#146491); +#146490 = CARTESIAN_POINT('',(102.253555,-110.422919,1.585)); +#146491 = VECTOR('',#146492,1.); +#146492 = DIRECTION('',(0.,-1.,0.)); +#146493 = ORIENTED_EDGE('',*,*,#146494,.T.); +#146494 = EDGE_CURVE('',#146487,#146495,#146497,.T.); +#146495 = VERTEX_POINT('',#146496); +#146496 = CARTESIAN_POINT('',(102.541802,-110.796728,1.585)); +#146497 = LINE('',#146498,#146499); +#146498 = CARTESIAN_POINT('',(102.253555,-110.796728,1.585)); +#146499 = VECTOR('',#146500,1.); +#146500 = DIRECTION('',(1.,0.,0.)); +#146501 = ORIENTED_EDGE('',*,*,#146502,.T.); +#146502 = EDGE_CURVE('',#146495,#146503,#146505,.T.); +#146503 = VERTEX_POINT('',#146504); +#146504 = CARTESIAN_POINT('',(102.674983,-110.663547,1.585)); +#146505 = CIRCLE('',#146506,0.18686440374); +#146506 = AXIS2_PLACEMENT_3D('',#146507,#146508,#146509); +#146507 = CARTESIAN_POINT('',(102.494266,-110.616011,1.585)); +#146508 = DIRECTION('',(0.,0.,1.)); +#146509 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146510 = ORIENTED_EDGE('',*,*,#146511,.T.); +#146511 = EDGE_CURVE('',#146503,#146468,#146512,.T.); +#146512 = LINE('',#146513,#146514); +#146513 = CARTESIAN_POINT('',(102.674983,-110.663547,1.585)); +#146514 = VECTOR('',#146515,1.); +#146515 = DIRECTION('',(0.,1.,0.)); +#146516 = PLANE('',#146517); +#146517 = AXIS2_PLACEMENT_3D('',#146518,#146519,#146520); +#146518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146519 = DIRECTION('',(0.,0.,1.)); +#146520 = DIRECTION('',(1.,0.,-0.)); +#146521 = SHELL_BASED_SURFACE_MODEL('',(#146522)); +#146522 = OPEN_SHELL('',(#146523)); +#146523 = ADVANCED_FACE('',(#146524,#146635),#146687,.T.); +#146524 = FACE_BOUND('',#146525,.F.); +#146525 = EDGE_LOOP('',(#146526,#146537,#146545,#146554,#146562,#146571, + #146579,#146587,#146596,#146604,#146612,#146620,#146629)); +#146526 = ORIENTED_EDGE('',*,*,#146527,.T.); +#146527 = EDGE_CURVE('',#146528,#146530,#146532,.T.); +#146528 = VERTEX_POINT('',#146529); +#146529 = CARTESIAN_POINT('',(106.104996,-110.333287,1.585)); +#146530 = VERTEX_POINT('',#146531); +#146531 = CARTESIAN_POINT('',(106.178555,-110.272919,1.585)); +#146532 = CIRCLE('',#146533,7.500074938989E-02); +#146533 = AXIS2_PLACEMENT_3D('',#146534,#146535,#146536); +#146534 = CARTESIAN_POINT('',(106.17855546611,-110.3479197493,1.585)); +#146535 = DIRECTION('',(0.,0.,-1.)); +#146536 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146537 = ORIENTED_EDGE('',*,*,#146538,.T.); +#146538 = EDGE_CURVE('',#146530,#146539,#146541,.T.); +#146539 = VERTEX_POINT('',#146540); +#146540 = CARTESIAN_POINT('',(106.574139,-110.27436,1.585)); +#146541 = LINE('',#146542,#146543); +#146542 = CARTESIAN_POINT('',(106.178555,-110.272919,1.585)); +#146543 = VECTOR('',#146544,1.); +#146544 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146545 = ORIENTED_EDGE('',*,*,#146546,.T.); +#146546 = EDGE_CURVE('',#146539,#146547,#146549,.T.); +#146547 = VERTEX_POINT('',#146548); +#146548 = CARTESIAN_POINT('',(106.823542,-110.523763,1.585)); +#146549 = CIRCLE('',#146550,0.347870264855); +#146550 = AXIS2_PLACEMENT_3D('',#146551,#146552,#146553); +#146551 = CARTESIAN_POINT('',(106.48681126502,-110.6110907349,1.585)); +#146552 = DIRECTION('',(0.,0.,-1.)); +#146553 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146554 = ORIENTED_EDGE('',*,*,#146555,.T.); +#146555 = EDGE_CURVE('',#146547,#146556,#146558,.T.); +#146556 = VERTEX_POINT('',#146557); +#146557 = CARTESIAN_POINT('',(106.82232,-110.701062,1.585)); +#146558 = LINE('',#146559,#146560); +#146559 = CARTESIAN_POINT('',(106.823542,-110.523763,1.585)); +#146560 = VECTOR('',#146561,1.); +#146561 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146562 = ORIENTED_EDGE('',*,*,#146563,.T.); +#146563 = EDGE_CURVE('',#146556,#146564,#146566,.T.); +#146564 = VERTEX_POINT('',#146565); +#146565 = CARTESIAN_POINT('',(106.574139,-110.945287,1.585)); +#146566 = CIRCLE('',#146567,0.348632345849); +#146567 = AXIS2_PLACEMENT_3D('',#146568,#146569,#146570); +#146568 = CARTESIAN_POINT('',(106.48637019403,-110.6078834593,1.585)); +#146569 = DIRECTION('',(0.,0.,-1.)); +#146570 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146571 = ORIENTED_EDGE('',*,*,#146572,.T.); +#146572 = EDGE_CURVE('',#146564,#146573,#146575,.T.); +#146573 = VERTEX_POINT('',#146574); +#146574 = CARTESIAN_POINT('',(106.560622,-110.946618,1.585)); +#146575 = LINE('',#146576,#146577); +#146576 = CARTESIAN_POINT('',(106.574139,-110.945287,1.585)); +#146577 = VECTOR('',#146578,1.); +#146578 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146579 = ORIENTED_EDGE('',*,*,#146580,.T.); +#146580 = EDGE_CURVE('',#146573,#146581,#146583,.T.); +#146581 = VERTEX_POINT('',#146582); +#146582 = CARTESIAN_POINT('',(106.818636,-111.317723,1.585)); +#146583 = LINE('',#146584,#146585); +#146584 = CARTESIAN_POINT('',(106.560622,-110.946618,1.585)); +#146585 = VECTOR('',#146586,1.); +#146586 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146587 = ORIENTED_EDGE('',*,*,#146588,.T.); +#146588 = EDGE_CURVE('',#146581,#146589,#146591,.T.); +#146589 = VERTEX_POINT('',#146590); +#146590 = CARTESIAN_POINT('',(106.688541,-111.390929,1.585)); +#146591 = CIRCLE('',#146592,7.500005951702E-02); +#146592 = AXIS2_PLACEMENT_3D('',#146593,#146594,#146595); +#146593 = CARTESIAN_POINT('',(106.74998306294,-111.3479187473,1.585)); +#146594 = DIRECTION('',(0.,0.,-1.)); +#146595 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146596 = ORIENTED_EDGE('',*,*,#146597,.T.); +#146597 = EDGE_CURVE('',#146589,#146598,#146600,.T.); +#146598 = VERTEX_POINT('',#146599); +#146599 = CARTESIAN_POINT('',(106.377601,-110.946728,1.585)); +#146600 = LINE('',#146601,#146602); +#146601 = CARTESIAN_POINT('',(106.688541,-111.390929,1.585)); +#146602 = VECTOR('',#146603,1.); +#146603 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146604 = ORIENTED_EDGE('',*,*,#146605,.T.); +#146605 = EDGE_CURVE('',#146598,#146606,#146608,.T.); +#146606 = VERTEX_POINT('',#146607); +#146607 = CARTESIAN_POINT('',(106.253555,-110.946728,1.585)); +#146608 = LINE('',#146609,#146610); +#146609 = CARTESIAN_POINT('',(106.377601,-110.946728,1.585)); +#146610 = VECTOR('',#146611,1.); +#146611 = DIRECTION('',(-1.,0.,0.)); +#146612 = ORIENTED_EDGE('',*,*,#146613,.T.); +#146613 = EDGE_CURVE('',#146606,#146614,#146616,.T.); +#146614 = VERTEX_POINT('',#146615); +#146615 = CARTESIAN_POINT('',(106.252114,-111.362551,1.585)); +#146616 = LINE('',#146617,#146618); +#146617 = CARTESIAN_POINT('',(106.253555,-110.946728,1.585)); +#146618 = VECTOR('',#146619,1.); +#146619 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146620 = ORIENTED_EDGE('',*,*,#146621,.T.); +#146621 = EDGE_CURVE('',#146614,#146622,#146624,.T.); +#146622 = VERTEX_POINT('',#146623); +#146623 = CARTESIAN_POINT('',(106.103555,-111.347919,1.585)); +#146624 = CIRCLE('',#146625,7.500006711464E-02); +#146625 = AXIS2_PLACEMENT_3D('',#146626,#146627,#146628); +#146626 = CARTESIAN_POINT('',(106.17855506711,-111.3479190671,1.585)); +#146627 = DIRECTION('',(-0.,0.,-1.)); +#146628 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146629 = ORIENTED_EDGE('',*,*,#146630,.T.); +#146630 = EDGE_CURVE('',#146622,#146528,#146631,.T.); +#146631 = LINE('',#146632,#146633); +#146632 = CARTESIAN_POINT('',(106.103555,-111.347919,1.585)); +#146633 = VECTOR('',#146634,1.); +#146634 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146635 = FACE_BOUND('',#146636,.F.); +#146636 = EDGE_LOOP('',(#146637,#146648,#146656,#146664,#146672,#146681) + ); +#146637 = ORIENTED_EDGE('',*,*,#146638,.T.); +#146638 = EDGE_CURVE('',#146639,#146641,#146643,.T.); +#146639 = VERTEX_POINT('',#146640); +#146640 = CARTESIAN_POINT('',(106.674983,-110.5561,1.585)); +#146641 = VERTEX_POINT('',#146642); +#146642 = CARTESIAN_POINT('',(106.541802,-110.422919,1.585)); +#146643 = CIRCLE('',#146644,0.18686440374); +#146644 = AXIS2_PLACEMENT_3D('',#146645,#146646,#146647); +#146645 = CARTESIAN_POINT('',(106.494266,-110.603636,1.585)); +#146646 = DIRECTION('',(0.,0.,1.)); +#146647 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146648 = ORIENTED_EDGE('',*,*,#146649,.T.); +#146649 = EDGE_CURVE('',#146641,#146650,#146652,.T.); +#146650 = VERTEX_POINT('',#146651); +#146651 = CARTESIAN_POINT('',(106.253555,-110.422919,1.585)); +#146652 = LINE('',#146653,#146654); +#146653 = CARTESIAN_POINT('',(106.541802,-110.422919,1.585)); +#146654 = VECTOR('',#146655,1.); +#146655 = DIRECTION('',(-1.,0.,0.)); +#146656 = ORIENTED_EDGE('',*,*,#146657,.T.); +#146657 = EDGE_CURVE('',#146650,#146658,#146660,.T.); +#146658 = VERTEX_POINT('',#146659); +#146659 = CARTESIAN_POINT('',(106.253555,-110.796728,1.585)); +#146660 = LINE('',#146661,#146662); +#146661 = CARTESIAN_POINT('',(106.253555,-110.422919,1.585)); +#146662 = VECTOR('',#146663,1.); +#146663 = DIRECTION('',(0.,-1.,0.)); +#146664 = ORIENTED_EDGE('',*,*,#146665,.T.); +#146665 = EDGE_CURVE('',#146658,#146666,#146668,.T.); +#146666 = VERTEX_POINT('',#146667); +#146667 = CARTESIAN_POINT('',(106.541802,-110.796728,1.585)); +#146668 = LINE('',#146669,#146670); +#146669 = CARTESIAN_POINT('',(106.253555,-110.796728,1.585)); +#146670 = VECTOR('',#146671,1.); +#146671 = DIRECTION('',(1.,0.,0.)); +#146672 = ORIENTED_EDGE('',*,*,#146673,.T.); +#146673 = EDGE_CURVE('',#146666,#146674,#146676,.T.); +#146674 = VERTEX_POINT('',#146675); +#146675 = CARTESIAN_POINT('',(106.674983,-110.663547,1.585)); +#146676 = CIRCLE('',#146677,0.18686440374); +#146677 = AXIS2_PLACEMENT_3D('',#146678,#146679,#146680); +#146678 = CARTESIAN_POINT('',(106.494266,-110.616011,1.585)); +#146679 = DIRECTION('',(0.,0.,1.)); +#146680 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146681 = ORIENTED_EDGE('',*,*,#146682,.T.); +#146682 = EDGE_CURVE('',#146674,#146639,#146683,.T.); +#146683 = LINE('',#146684,#146685); +#146684 = CARTESIAN_POINT('',(106.674983,-110.663547,1.585)); +#146685 = VECTOR('',#146686,1.); +#146686 = DIRECTION('',(0.,1.,0.)); +#146687 = PLANE('',#146688); +#146688 = AXIS2_PLACEMENT_3D('',#146689,#146690,#146691); +#146689 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146690 = DIRECTION('',(0.,0.,1.)); +#146691 = DIRECTION('',(1.,0.,-0.)); +#146692 = SHELL_BASED_SURFACE_MODEL('',(#146693)); +#146693 = OPEN_SHELL('',(#146694)); +#146694 = ADVANCED_FACE('',(#146695,#146806),#146858,.T.); +#146695 = FACE_BOUND('',#146696,.F.); +#146696 = EDGE_LOOP('',(#146697,#146708,#146716,#146725,#146733,#146742, + #146750,#146758,#146767,#146775,#146783,#146791,#146800)); +#146697 = ORIENTED_EDGE('',*,*,#146698,.T.); +#146698 = EDGE_CURVE('',#146699,#146701,#146703,.T.); +#146699 = VERTEX_POINT('',#146700); +#146700 = CARTESIAN_POINT('',(109.39071,-110.333287,1.585)); +#146701 = VERTEX_POINT('',#146702); +#146702 = CARTESIAN_POINT('',(109.464269,-110.272919,1.585)); +#146703 = CIRCLE('',#146704,7.500074938988E-02); +#146704 = AXIS2_PLACEMENT_3D('',#146705,#146706,#146707); +#146705 = CARTESIAN_POINT('',(109.46426946611,-110.3479197493,1.585)); +#146706 = DIRECTION('',(0.,0.,-1.)); +#146707 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146708 = ORIENTED_EDGE('',*,*,#146709,.T.); +#146709 = EDGE_CURVE('',#146701,#146710,#146712,.T.); +#146710 = VERTEX_POINT('',#146711); +#146711 = CARTESIAN_POINT('',(109.859853,-110.27436,1.585)); +#146712 = LINE('',#146713,#146714); +#146713 = CARTESIAN_POINT('',(109.464269,-110.272919,1.585)); +#146714 = VECTOR('',#146715,1.); +#146715 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146716 = ORIENTED_EDGE('',*,*,#146717,.T.); +#146717 = EDGE_CURVE('',#146710,#146718,#146720,.T.); +#146718 = VERTEX_POINT('',#146719); +#146719 = CARTESIAN_POINT('',(110.109256,-110.523763,1.585)); +#146720 = CIRCLE('',#146721,0.347870264855); +#146721 = AXIS2_PLACEMENT_3D('',#146722,#146723,#146724); +#146722 = CARTESIAN_POINT('',(109.77252526502,-110.6110907349,1.585)); +#146723 = DIRECTION('',(0.,0.,-1.)); +#146724 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146725 = ORIENTED_EDGE('',*,*,#146726,.T.); +#146726 = EDGE_CURVE('',#146718,#146727,#146729,.T.); +#146727 = VERTEX_POINT('',#146728); +#146728 = CARTESIAN_POINT('',(110.108034,-110.701062,1.585)); +#146729 = LINE('',#146730,#146731); +#146730 = CARTESIAN_POINT('',(110.109256,-110.523763,1.585)); +#146731 = VECTOR('',#146732,1.); +#146732 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146733 = ORIENTED_EDGE('',*,*,#146734,.T.); +#146734 = EDGE_CURVE('',#146727,#146735,#146737,.T.); +#146735 = VERTEX_POINT('',#146736); +#146736 = CARTESIAN_POINT('',(109.859853,-110.945287,1.585)); +#146737 = CIRCLE('',#146738,0.348632345848); +#146738 = AXIS2_PLACEMENT_3D('',#146739,#146740,#146741); +#146739 = CARTESIAN_POINT('',(109.77208419403,-110.6078834593,1.585)); +#146740 = DIRECTION('',(0.,0.,-1.)); +#146741 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146742 = ORIENTED_EDGE('',*,*,#146743,.T.); +#146743 = EDGE_CURVE('',#146735,#146744,#146746,.T.); +#146744 = VERTEX_POINT('',#146745); +#146745 = CARTESIAN_POINT('',(109.846336,-110.946618,1.585)); +#146746 = LINE('',#146747,#146748); +#146747 = CARTESIAN_POINT('',(109.859853,-110.945287,1.585)); +#146748 = VECTOR('',#146749,1.); +#146749 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146750 = ORIENTED_EDGE('',*,*,#146751,.T.); +#146751 = EDGE_CURVE('',#146744,#146752,#146754,.T.); +#146752 = VERTEX_POINT('',#146753); +#146753 = CARTESIAN_POINT('',(110.10435,-111.317723,1.585)); +#146754 = LINE('',#146755,#146756); +#146755 = CARTESIAN_POINT('',(109.846336,-110.946618,1.585)); +#146756 = VECTOR('',#146757,1.); +#146757 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146758 = ORIENTED_EDGE('',*,*,#146759,.T.); +#146759 = EDGE_CURVE('',#146752,#146760,#146762,.T.); +#146760 = VERTEX_POINT('',#146761); +#146761 = CARTESIAN_POINT('',(109.974255,-111.390929,1.585)); +#146762 = CIRCLE('',#146763,7.500005951702E-02); +#146763 = AXIS2_PLACEMENT_3D('',#146764,#146765,#146766); +#146764 = CARTESIAN_POINT('',(110.03569706294,-111.3479187473,1.585)); +#146765 = DIRECTION('',(0.,0.,-1.)); +#146766 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146767 = ORIENTED_EDGE('',*,*,#146768,.T.); +#146768 = EDGE_CURVE('',#146760,#146769,#146771,.T.); +#146769 = VERTEX_POINT('',#146770); +#146770 = CARTESIAN_POINT('',(109.663315,-110.946728,1.585)); +#146771 = LINE('',#146772,#146773); +#146772 = CARTESIAN_POINT('',(109.974255,-111.390929,1.585)); +#146773 = VECTOR('',#146774,1.); +#146774 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146775 = ORIENTED_EDGE('',*,*,#146776,.T.); +#146776 = EDGE_CURVE('',#146769,#146777,#146779,.T.); +#146777 = VERTEX_POINT('',#146778); +#146778 = CARTESIAN_POINT('',(109.539269,-110.946728,1.585)); +#146779 = LINE('',#146780,#146781); +#146780 = CARTESIAN_POINT('',(109.663315,-110.946728,1.585)); +#146781 = VECTOR('',#146782,1.); +#146782 = DIRECTION('',(-1.,0.,0.)); +#146783 = ORIENTED_EDGE('',*,*,#146784,.T.); +#146784 = EDGE_CURVE('',#146777,#146785,#146787,.T.); +#146785 = VERTEX_POINT('',#146786); +#146786 = CARTESIAN_POINT('',(109.537828,-111.362551,1.585)); +#146787 = LINE('',#146788,#146789); +#146788 = CARTESIAN_POINT('',(109.539269,-110.946728,1.585)); +#146789 = VECTOR('',#146790,1.); +#146790 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146791 = ORIENTED_EDGE('',*,*,#146792,.T.); +#146792 = EDGE_CURVE('',#146785,#146793,#146795,.T.); +#146793 = VERTEX_POINT('',#146794); +#146794 = CARTESIAN_POINT('',(109.389269,-111.347919,1.585)); +#146795 = CIRCLE('',#146796,7.500006711464E-02); +#146796 = AXIS2_PLACEMENT_3D('',#146797,#146798,#146799); +#146797 = CARTESIAN_POINT('',(109.46426906711,-111.3479190671,1.585)); +#146798 = DIRECTION('',(-0.,0.,-1.)); +#146799 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146800 = ORIENTED_EDGE('',*,*,#146801,.T.); +#146801 = EDGE_CURVE('',#146793,#146699,#146802,.T.); +#146802 = LINE('',#146803,#146804); +#146803 = CARTESIAN_POINT('',(109.389269,-111.347919,1.585)); +#146804 = VECTOR('',#146805,1.); +#146805 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146806 = FACE_BOUND('',#146807,.F.); +#146807 = EDGE_LOOP('',(#146808,#146819,#146827,#146835,#146843,#146852) + ); +#146808 = ORIENTED_EDGE('',*,*,#146809,.T.); +#146809 = EDGE_CURVE('',#146810,#146812,#146814,.T.); +#146810 = VERTEX_POINT('',#146811); +#146811 = CARTESIAN_POINT('',(109.960697,-110.5561,1.585)); +#146812 = VERTEX_POINT('',#146813); +#146813 = CARTESIAN_POINT('',(109.827516,-110.422919,1.585)); +#146814 = CIRCLE('',#146815,0.18686440374); +#146815 = AXIS2_PLACEMENT_3D('',#146816,#146817,#146818); +#146816 = CARTESIAN_POINT('',(109.77998,-110.603636,1.585)); +#146817 = DIRECTION('',(0.,0.,1.)); +#146818 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146819 = ORIENTED_EDGE('',*,*,#146820,.T.); +#146820 = EDGE_CURVE('',#146812,#146821,#146823,.T.); +#146821 = VERTEX_POINT('',#146822); +#146822 = CARTESIAN_POINT('',(109.539269,-110.422919,1.585)); +#146823 = LINE('',#146824,#146825); +#146824 = CARTESIAN_POINT('',(109.827516,-110.422919,1.585)); +#146825 = VECTOR('',#146826,1.); +#146826 = DIRECTION('',(-1.,0.,0.)); +#146827 = ORIENTED_EDGE('',*,*,#146828,.T.); +#146828 = EDGE_CURVE('',#146821,#146829,#146831,.T.); +#146829 = VERTEX_POINT('',#146830); +#146830 = CARTESIAN_POINT('',(109.539269,-110.796728,1.585)); +#146831 = LINE('',#146832,#146833); +#146832 = CARTESIAN_POINT('',(109.539269,-110.422919,1.585)); +#146833 = VECTOR('',#146834,1.); +#146834 = DIRECTION('',(0.,-1.,0.)); +#146835 = ORIENTED_EDGE('',*,*,#146836,.T.); +#146836 = EDGE_CURVE('',#146829,#146837,#146839,.T.); +#146837 = VERTEX_POINT('',#146838); +#146838 = CARTESIAN_POINT('',(109.827516,-110.796728,1.585)); +#146839 = LINE('',#146840,#146841); +#146840 = CARTESIAN_POINT('',(109.539269,-110.796728,1.585)); +#146841 = VECTOR('',#146842,1.); +#146842 = DIRECTION('',(1.,0.,0.)); +#146843 = ORIENTED_EDGE('',*,*,#146844,.T.); +#146844 = EDGE_CURVE('',#146837,#146845,#146847,.T.); +#146845 = VERTEX_POINT('',#146846); +#146846 = CARTESIAN_POINT('',(109.960697,-110.663547,1.585)); +#146847 = CIRCLE('',#146848,0.18686440374); +#146848 = AXIS2_PLACEMENT_3D('',#146849,#146850,#146851); +#146849 = CARTESIAN_POINT('',(109.77998,-110.616011,1.585)); +#146850 = DIRECTION('',(0.,0.,1.)); +#146851 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146852 = ORIENTED_EDGE('',*,*,#146853,.T.); +#146853 = EDGE_CURVE('',#146845,#146810,#146854,.T.); +#146854 = LINE('',#146855,#146856); +#146855 = CARTESIAN_POINT('',(109.960697,-110.663547,1.585)); +#146856 = VECTOR('',#146857,1.); +#146857 = DIRECTION('',(0.,1.,0.)); +#146858 = PLANE('',#146859); +#146859 = AXIS2_PLACEMENT_3D('',#146860,#146861,#146862); +#146860 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146861 = DIRECTION('',(0.,0.,1.)); +#146862 = DIRECTION('',(1.,0.,-0.)); +#146863 = SHELL_BASED_SURFACE_MODEL('',(#146864)); +#146864 = OPEN_SHELL('',(#146865)); +#146865 = ADVANCED_FACE('',(#146866,#146977),#147029,.T.); +#146866 = FACE_BOUND('',#146867,.F.); +#146867 = EDGE_LOOP('',(#146868,#146879,#146887,#146896,#146904,#146913, + #146921,#146929,#146938,#146946,#146954,#146962,#146971)); +#146868 = ORIENTED_EDGE('',*,*,#146869,.T.); +#146869 = EDGE_CURVE('',#146870,#146872,#146874,.T.); +#146870 = VERTEX_POINT('',#146871); +#146871 = CARTESIAN_POINT('',(113.628805,-110.333287,1.585)); +#146872 = VERTEX_POINT('',#146873); +#146873 = CARTESIAN_POINT('',(113.702364,-110.272919,1.585)); +#146874 = CIRCLE('',#146875,7.500074938989E-02); +#146875 = AXIS2_PLACEMENT_3D('',#146876,#146877,#146878); +#146876 = CARTESIAN_POINT('',(113.70236446611,-110.3479197493,1.585)); +#146877 = DIRECTION('',(0.,0.,-1.)); +#146878 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146879 = ORIENTED_EDGE('',*,*,#146880,.T.); +#146880 = EDGE_CURVE('',#146872,#146881,#146883,.T.); +#146881 = VERTEX_POINT('',#146882); +#146882 = CARTESIAN_POINT('',(114.097948,-110.27436,1.585)); +#146883 = LINE('',#146884,#146885); +#146884 = CARTESIAN_POINT('',(113.702364,-110.272919,1.585)); +#146885 = VECTOR('',#146886,1.); +#146886 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146887 = ORIENTED_EDGE('',*,*,#146888,.T.); +#146888 = EDGE_CURVE('',#146881,#146889,#146891,.T.); +#146889 = VERTEX_POINT('',#146890); +#146890 = CARTESIAN_POINT('',(114.347351,-110.523763,1.585)); +#146891 = CIRCLE('',#146892,0.347870264855); +#146892 = AXIS2_PLACEMENT_3D('',#146893,#146894,#146895); +#146893 = CARTESIAN_POINT('',(114.01062026502,-110.6110907349,1.585)); +#146894 = DIRECTION('',(0.,0.,-1.)); +#146895 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146896 = ORIENTED_EDGE('',*,*,#146897,.T.); +#146897 = EDGE_CURVE('',#146889,#146898,#146900,.T.); +#146898 = VERTEX_POINT('',#146899); +#146899 = CARTESIAN_POINT('',(114.346129,-110.701062,1.585)); +#146900 = LINE('',#146901,#146902); +#146901 = CARTESIAN_POINT('',(114.347351,-110.523763,1.585)); +#146902 = VECTOR('',#146903,1.); +#146903 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146904 = ORIENTED_EDGE('',*,*,#146905,.T.); +#146905 = EDGE_CURVE('',#146898,#146906,#146908,.T.); +#146906 = VERTEX_POINT('',#146907); +#146907 = CARTESIAN_POINT('',(114.097948,-110.945287,1.585)); +#146908 = CIRCLE('',#146909,0.348632345849); +#146909 = AXIS2_PLACEMENT_3D('',#146910,#146911,#146912); +#146910 = CARTESIAN_POINT('',(114.01017919403,-110.6078834593,1.585)); +#146911 = DIRECTION('',(0.,0.,-1.)); +#146912 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146913 = ORIENTED_EDGE('',*,*,#146914,.T.); +#146914 = EDGE_CURVE('',#146906,#146915,#146917,.T.); +#146915 = VERTEX_POINT('',#146916); +#146916 = CARTESIAN_POINT('',(114.084431,-110.946618,1.585)); +#146917 = LINE('',#146918,#146919); +#146918 = CARTESIAN_POINT('',(114.097948,-110.945287,1.585)); +#146919 = VECTOR('',#146920,1.); +#146920 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146921 = ORIENTED_EDGE('',*,*,#146922,.T.); +#146922 = EDGE_CURVE('',#146915,#146923,#146925,.T.); +#146923 = VERTEX_POINT('',#146924); +#146924 = CARTESIAN_POINT('',(114.342445,-111.317723,1.585)); +#146925 = LINE('',#146926,#146927); +#146926 = CARTESIAN_POINT('',(114.084431,-110.946618,1.585)); +#146927 = VECTOR('',#146928,1.); +#146928 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146929 = ORIENTED_EDGE('',*,*,#146930,.T.); +#146930 = EDGE_CURVE('',#146923,#146931,#146933,.T.); +#146931 = VERTEX_POINT('',#146932); +#146932 = CARTESIAN_POINT('',(114.21235,-111.390929,1.585)); +#146933 = CIRCLE('',#146934,7.500005951702E-02); +#146934 = AXIS2_PLACEMENT_3D('',#146935,#146936,#146937); +#146935 = CARTESIAN_POINT('',(114.27379206294,-111.3479187473,1.585)); +#146936 = DIRECTION('',(0.,0.,-1.)); +#146937 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146938 = ORIENTED_EDGE('',*,*,#146939,.T.); +#146939 = EDGE_CURVE('',#146931,#146940,#146942,.T.); +#146940 = VERTEX_POINT('',#146941); +#146941 = CARTESIAN_POINT('',(113.90141,-110.946728,1.585)); +#146942 = LINE('',#146943,#146944); +#146943 = CARTESIAN_POINT('',(114.21235,-111.390929,1.585)); +#146944 = VECTOR('',#146945,1.); +#146945 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146946 = ORIENTED_EDGE('',*,*,#146947,.T.); +#146947 = EDGE_CURVE('',#146940,#146948,#146950,.T.); +#146948 = VERTEX_POINT('',#146949); +#146949 = CARTESIAN_POINT('',(113.777364,-110.946728,1.585)); +#146950 = LINE('',#146951,#146952); +#146951 = CARTESIAN_POINT('',(113.90141,-110.946728,1.585)); +#146952 = VECTOR('',#146953,1.); +#146953 = DIRECTION('',(-1.,0.,0.)); +#146954 = ORIENTED_EDGE('',*,*,#146955,.T.); +#146955 = EDGE_CURVE('',#146948,#146956,#146958,.T.); +#146956 = VERTEX_POINT('',#146957); +#146957 = CARTESIAN_POINT('',(113.775923,-111.362551,1.585)); +#146958 = LINE('',#146959,#146960); +#146959 = CARTESIAN_POINT('',(113.777364,-110.946728,1.585)); +#146960 = VECTOR('',#146961,1.); +#146961 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146962 = ORIENTED_EDGE('',*,*,#146963,.T.); +#146963 = EDGE_CURVE('',#146956,#146964,#146966,.T.); +#146964 = VERTEX_POINT('',#146965); +#146965 = CARTESIAN_POINT('',(113.627364,-111.347919,1.585)); +#146966 = CIRCLE('',#146967,7.500006711464E-02); +#146967 = AXIS2_PLACEMENT_3D('',#146968,#146969,#146970); +#146968 = CARTESIAN_POINT('',(113.70236406711,-111.3479190671,1.585)); +#146969 = DIRECTION('',(-0.,0.,-1.)); +#146970 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146971 = ORIENTED_EDGE('',*,*,#146972,.T.); +#146972 = EDGE_CURVE('',#146964,#146870,#146973,.T.); +#146973 = LINE('',#146974,#146975); +#146974 = CARTESIAN_POINT('',(113.627364,-111.347919,1.585)); +#146975 = VECTOR('',#146976,1.); +#146976 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146977 = FACE_BOUND('',#146978,.F.); +#146978 = EDGE_LOOP('',(#146979,#146990,#146998,#147006,#147014,#147023) + ); +#146979 = ORIENTED_EDGE('',*,*,#146980,.T.); +#146980 = EDGE_CURVE('',#146981,#146983,#146985,.T.); +#146981 = VERTEX_POINT('',#146982); +#146982 = CARTESIAN_POINT('',(114.198792,-110.5561,1.585)); +#146983 = VERTEX_POINT('',#146984); +#146984 = CARTESIAN_POINT('',(114.065611,-110.422919,1.585)); +#146985 = CIRCLE('',#146986,0.18686440374); +#146986 = AXIS2_PLACEMENT_3D('',#146987,#146988,#146989); +#146987 = CARTESIAN_POINT('',(114.018075,-110.603636,1.585)); +#146988 = DIRECTION('',(0.,0.,1.)); +#146989 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146990 = ORIENTED_EDGE('',*,*,#146991,.T.); +#146991 = EDGE_CURVE('',#146983,#146992,#146994,.T.); +#146992 = VERTEX_POINT('',#146993); +#146993 = CARTESIAN_POINT('',(113.777364,-110.422919,1.585)); +#146994 = LINE('',#146995,#146996); +#146995 = CARTESIAN_POINT('',(114.065611,-110.422919,1.585)); +#146996 = VECTOR('',#146997,1.); +#146997 = DIRECTION('',(-1.,0.,0.)); +#146998 = ORIENTED_EDGE('',*,*,#146999,.T.); +#146999 = EDGE_CURVE('',#146992,#147000,#147002,.T.); +#147000 = VERTEX_POINT('',#147001); +#147001 = CARTESIAN_POINT('',(113.777364,-110.796728,1.585)); +#147002 = LINE('',#147003,#147004); +#147003 = CARTESIAN_POINT('',(113.777364,-110.422919,1.585)); +#147004 = VECTOR('',#147005,1.); +#147005 = DIRECTION('',(0.,-1.,0.)); +#147006 = ORIENTED_EDGE('',*,*,#147007,.T.); +#147007 = EDGE_CURVE('',#147000,#147008,#147010,.T.); +#147008 = VERTEX_POINT('',#147009); +#147009 = CARTESIAN_POINT('',(114.065611,-110.796728,1.585)); +#147010 = LINE('',#147011,#147012); +#147011 = CARTESIAN_POINT('',(113.777364,-110.796728,1.585)); +#147012 = VECTOR('',#147013,1.); +#147013 = DIRECTION('',(1.,0.,0.)); +#147014 = ORIENTED_EDGE('',*,*,#147015,.T.); +#147015 = EDGE_CURVE('',#147008,#147016,#147018,.T.); +#147016 = VERTEX_POINT('',#147017); +#147017 = CARTESIAN_POINT('',(114.198792,-110.663547,1.585)); +#147018 = CIRCLE('',#147019,0.18686440374); +#147019 = AXIS2_PLACEMENT_3D('',#147020,#147021,#147022); +#147020 = CARTESIAN_POINT('',(114.018075,-110.616011,1.585)); +#147021 = DIRECTION('',(0.,0.,1.)); +#147022 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#147023 = ORIENTED_EDGE('',*,*,#147024,.T.); +#147024 = EDGE_CURVE('',#147016,#146981,#147025,.T.); +#147025 = LINE('',#147026,#147027); +#147026 = CARTESIAN_POINT('',(114.198792,-110.663547,1.585)); +#147027 = VECTOR('',#147028,1.); +#147028 = DIRECTION('',(0.,1.,0.)); +#147029 = PLANE('',#147030); +#147030 = AXIS2_PLACEMENT_3D('',#147031,#147032,#147033); +#147031 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147032 = DIRECTION('',(0.,0.,1.)); +#147033 = DIRECTION('',(1.,0.,-0.)); +#147034 = SHELL_BASED_SURFACE_MODEL('',(#147035)); +#147035 = OPEN_SHELL('',(#147036)); +#147036 = ADVANCED_FACE('',(#147037,#147148),#147200,.T.); +#147037 = FACE_BOUND('',#147038,.F.); +#147038 = EDGE_LOOP('',(#147039,#147050,#147058,#147067,#147075,#147084, + #147092,#147100,#147109,#147117,#147125,#147133,#147142)); +#147039 = ORIENTED_EDGE('',*,*,#147040,.T.); +#147040 = EDGE_CURVE('',#147041,#147043,#147045,.T.); +#147041 = VERTEX_POINT('',#147042); +#147042 = CARTESIAN_POINT('',(123.628805,-110.333287,1.585)); +#147043 = VERTEX_POINT('',#147044); +#147044 = CARTESIAN_POINT('',(123.702364,-110.272919,1.585)); +#147045 = CIRCLE('',#147046,7.500074938989E-02); +#147046 = AXIS2_PLACEMENT_3D('',#147047,#147048,#147049); +#147047 = CARTESIAN_POINT('',(123.70236446611,-110.3479197493,1.585)); +#147048 = DIRECTION('',(0.,0.,-1.)); +#147049 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#147050 = ORIENTED_EDGE('',*,*,#147051,.T.); +#147051 = EDGE_CURVE('',#147043,#147052,#147054,.T.); +#147052 = VERTEX_POINT('',#147053); +#147053 = CARTESIAN_POINT('',(124.097948,-110.27436,1.585)); +#147054 = LINE('',#147055,#147056); +#147055 = CARTESIAN_POINT('',(123.702364,-110.272919,1.585)); +#147056 = VECTOR('',#147057,1.); +#147057 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#147058 = ORIENTED_EDGE('',*,*,#147059,.T.); +#147059 = EDGE_CURVE('',#147052,#147060,#147062,.T.); +#147060 = VERTEX_POINT('',#147061); +#147061 = CARTESIAN_POINT('',(124.347351,-110.523763,1.585)); +#147062 = CIRCLE('',#147063,0.347870264855); +#147063 = AXIS2_PLACEMENT_3D('',#147064,#147065,#147066); +#147064 = CARTESIAN_POINT('',(124.01062026502,-110.6110907349,1.585)); +#147065 = DIRECTION('',(0.,0.,-1.)); +#147066 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#147067 = ORIENTED_EDGE('',*,*,#147068,.T.); +#147068 = EDGE_CURVE('',#147060,#147069,#147071,.T.); +#147069 = VERTEX_POINT('',#147070); +#147070 = CARTESIAN_POINT('',(124.346129,-110.701062,1.585)); +#147071 = LINE('',#147072,#147073); +#147072 = CARTESIAN_POINT('',(124.347351,-110.523763,1.585)); +#147073 = VECTOR('',#147074,1.); +#147074 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#147075 = ORIENTED_EDGE('',*,*,#147076,.T.); +#147076 = EDGE_CURVE('',#147069,#147077,#147079,.T.); +#147077 = VERTEX_POINT('',#147078); +#147078 = CARTESIAN_POINT('',(124.097948,-110.945287,1.585)); +#147079 = CIRCLE('',#147080,0.348632345849); +#147080 = AXIS2_PLACEMENT_3D('',#147081,#147082,#147083); +#147081 = CARTESIAN_POINT('',(124.01017919403,-110.6078834593,1.585)); +#147082 = DIRECTION('',(0.,0.,-1.)); +#147083 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#147084 = ORIENTED_EDGE('',*,*,#147085,.T.); +#147085 = EDGE_CURVE('',#147077,#147086,#147088,.T.); +#147086 = VERTEX_POINT('',#147087); +#147087 = CARTESIAN_POINT('',(124.084431,-110.946618,1.585)); +#147088 = LINE('',#147089,#147090); +#147089 = CARTESIAN_POINT('',(124.097948,-110.945287,1.585)); +#147090 = VECTOR('',#147091,1.); +#147091 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#147092 = ORIENTED_EDGE('',*,*,#147093,.T.); +#147093 = EDGE_CURVE('',#147086,#147094,#147096,.T.); +#147094 = VERTEX_POINT('',#147095); +#147095 = CARTESIAN_POINT('',(124.342445,-111.317723,1.585)); +#147096 = LINE('',#147097,#147098); +#147097 = CARTESIAN_POINT('',(124.084431,-110.946618,1.585)); +#147098 = VECTOR('',#147099,1.); +#147099 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#147100 = ORIENTED_EDGE('',*,*,#147101,.T.); +#147101 = EDGE_CURVE('',#147094,#147102,#147104,.T.); +#147102 = VERTEX_POINT('',#147103); +#147103 = CARTESIAN_POINT('',(124.21235,-111.390929,1.585)); +#147104 = CIRCLE('',#147105,7.500005951702E-02); +#147105 = AXIS2_PLACEMENT_3D('',#147106,#147107,#147108); +#147106 = CARTESIAN_POINT('',(124.27379206294,-111.3479187473,1.585)); +#147107 = DIRECTION('',(0.,0.,-1.)); +#147108 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#147109 = ORIENTED_EDGE('',*,*,#147110,.T.); +#147110 = EDGE_CURVE('',#147102,#147111,#147113,.T.); +#147111 = VERTEX_POINT('',#147112); +#147112 = CARTESIAN_POINT('',(123.90141,-110.946728,1.585)); +#147113 = LINE('',#147114,#147115); +#147114 = CARTESIAN_POINT('',(124.21235,-111.390929,1.585)); +#147115 = VECTOR('',#147116,1.); +#147116 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#147117 = ORIENTED_EDGE('',*,*,#147118,.T.); +#147118 = EDGE_CURVE('',#147111,#147119,#147121,.T.); +#147119 = VERTEX_POINT('',#147120); +#147120 = CARTESIAN_POINT('',(123.777364,-110.946728,1.585)); +#147121 = LINE('',#147122,#147123); +#147122 = CARTESIAN_POINT('',(123.90141,-110.946728,1.585)); +#147123 = VECTOR('',#147124,1.); +#147124 = DIRECTION('',(-1.,0.,0.)); +#147125 = ORIENTED_EDGE('',*,*,#147126,.T.); +#147126 = EDGE_CURVE('',#147119,#147127,#147129,.T.); +#147127 = VERTEX_POINT('',#147128); +#147128 = CARTESIAN_POINT('',(123.775923,-111.362551,1.585)); +#147129 = LINE('',#147130,#147131); +#147130 = CARTESIAN_POINT('',(123.777364,-110.946728,1.585)); +#147131 = VECTOR('',#147132,1.); +#147132 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#147133 = ORIENTED_EDGE('',*,*,#147134,.T.); +#147134 = EDGE_CURVE('',#147127,#147135,#147137,.T.); +#147135 = VERTEX_POINT('',#147136); +#147136 = CARTESIAN_POINT('',(123.627364,-111.347919,1.585)); +#147137 = CIRCLE('',#147138,7.500006711464E-02); +#147138 = AXIS2_PLACEMENT_3D('',#147139,#147140,#147141); +#147139 = CARTESIAN_POINT('',(123.70236406711,-111.3479190671,1.585)); +#147140 = DIRECTION('',(-0.,0.,-1.)); +#147141 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#147142 = ORIENTED_EDGE('',*,*,#147143,.T.); +#147143 = EDGE_CURVE('',#147135,#147041,#147144,.T.); +#147144 = LINE('',#147145,#147146); +#147145 = CARTESIAN_POINT('',(123.627364,-111.347919,1.585)); +#147146 = VECTOR('',#147147,1.); +#147147 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#147148 = FACE_BOUND('',#147149,.F.); +#147149 = EDGE_LOOP('',(#147150,#147161,#147169,#147177,#147185,#147194) + ); +#147150 = ORIENTED_EDGE('',*,*,#147151,.T.); +#147151 = EDGE_CURVE('',#147152,#147154,#147156,.T.); +#147152 = VERTEX_POINT('',#147153); +#147153 = CARTESIAN_POINT('',(124.198792,-110.5561,1.585)); +#147154 = VERTEX_POINT('',#147155); +#147155 = CARTESIAN_POINT('',(124.065611,-110.422919,1.585)); +#147156 = CIRCLE('',#147157,0.18686440374); +#147157 = AXIS2_PLACEMENT_3D('',#147158,#147159,#147160); +#147158 = CARTESIAN_POINT('',(124.018075,-110.603636,1.585)); +#147159 = DIRECTION('',(0.,0.,1.)); +#147160 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#147161 = ORIENTED_EDGE('',*,*,#147162,.T.); +#147162 = EDGE_CURVE('',#147154,#147163,#147165,.T.); +#147163 = VERTEX_POINT('',#147164); +#147164 = CARTESIAN_POINT('',(123.777364,-110.422919,1.585)); +#147165 = LINE('',#147166,#147167); +#147166 = CARTESIAN_POINT('',(124.065611,-110.422919,1.585)); +#147167 = VECTOR('',#147168,1.); +#147168 = DIRECTION('',(-1.,0.,0.)); +#147169 = ORIENTED_EDGE('',*,*,#147170,.T.); +#147170 = EDGE_CURVE('',#147163,#147171,#147173,.T.); +#147171 = VERTEX_POINT('',#147172); +#147172 = CARTESIAN_POINT('',(123.777364,-110.796728,1.585)); +#147173 = LINE('',#147174,#147175); +#147174 = CARTESIAN_POINT('',(123.777364,-110.422919,1.585)); +#147175 = VECTOR('',#147176,1.); +#147176 = DIRECTION('',(0.,-1.,0.)); +#147177 = ORIENTED_EDGE('',*,*,#147178,.T.); +#147178 = EDGE_CURVE('',#147171,#147179,#147181,.T.); +#147179 = VERTEX_POINT('',#147180); +#147180 = CARTESIAN_POINT('',(124.065611,-110.796728,1.585)); +#147181 = LINE('',#147182,#147183); +#147182 = CARTESIAN_POINT('',(123.777364,-110.796728,1.585)); +#147183 = VECTOR('',#147184,1.); +#147184 = DIRECTION('',(1.,0.,0.)); +#147185 = ORIENTED_EDGE('',*,*,#147186,.T.); +#147186 = EDGE_CURVE('',#147179,#147187,#147189,.T.); +#147187 = VERTEX_POINT('',#147188); +#147188 = CARTESIAN_POINT('',(124.198792,-110.663547,1.585)); +#147189 = CIRCLE('',#147190,0.18686440374); +#147190 = AXIS2_PLACEMENT_3D('',#147191,#147192,#147193); +#147191 = CARTESIAN_POINT('',(124.018075,-110.616011,1.585)); +#147192 = DIRECTION('',(0.,0.,1.)); +#147193 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#147194 = ORIENTED_EDGE('',*,*,#147195,.T.); +#147195 = EDGE_CURVE('',#147187,#147152,#147196,.T.); +#147196 = LINE('',#147197,#147198); +#147197 = CARTESIAN_POINT('',(124.198792,-110.663547,1.585)); +#147198 = VECTOR('',#147199,1.); +#147199 = DIRECTION('',(0.,1.,0.)); +#147200 = PLANE('',#147201); +#147201 = AXIS2_PLACEMENT_3D('',#147202,#147203,#147204); +#147202 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147203 = DIRECTION('',(0.,0.,1.)); +#147204 = DIRECTION('',(1.,0.,-0.)); +#147205 = SHELL_BASED_SURFACE_MODEL('',(#147206)); +#147206 = OPEN_SHELL('',(#147207)); +#147207 = ADVANCED_FACE('',(#147208,#147319),#147371,.T.); +#147208 = FACE_BOUND('',#147209,.F.); +#147209 = EDGE_LOOP('',(#147210,#147221,#147229,#147238,#147246,#147255, + #147263,#147271,#147280,#147288,#147296,#147304,#147313)); +#147210 = ORIENTED_EDGE('',*,*,#147211,.T.); +#147211 = EDGE_CURVE('',#147212,#147214,#147216,.T.); +#147212 = VERTEX_POINT('',#147213); +#147213 = CARTESIAN_POINT('',(127.628805,-110.333287,1.585)); +#147214 = VERTEX_POINT('',#147215); +#147215 = CARTESIAN_POINT('',(127.702364,-110.272919,1.585)); +#147216 = CIRCLE('',#147217,7.500074938989E-02); +#147217 = AXIS2_PLACEMENT_3D('',#147218,#147219,#147220); +#147218 = CARTESIAN_POINT('',(127.70236446611,-110.3479197493,1.585)); +#147219 = DIRECTION('',(0.,0.,-1.)); +#147220 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#147221 = ORIENTED_EDGE('',*,*,#147222,.T.); +#147222 = EDGE_CURVE('',#147214,#147223,#147225,.T.); +#147223 = VERTEX_POINT('',#147224); +#147224 = CARTESIAN_POINT('',(128.097948,-110.27436,1.585)); +#147225 = LINE('',#147226,#147227); +#147226 = CARTESIAN_POINT('',(127.702364,-110.272919,1.585)); +#147227 = VECTOR('',#147228,1.); +#147228 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#147229 = ORIENTED_EDGE('',*,*,#147230,.T.); +#147230 = EDGE_CURVE('',#147223,#147231,#147233,.T.); +#147231 = VERTEX_POINT('',#147232); +#147232 = CARTESIAN_POINT('',(128.347351,-110.523763,1.585)); +#147233 = CIRCLE('',#147234,0.347870264855); +#147234 = AXIS2_PLACEMENT_3D('',#147235,#147236,#147237); +#147235 = CARTESIAN_POINT('',(128.01062026502,-110.6110907349,1.585)); +#147236 = DIRECTION('',(0.,0.,-1.)); +#147237 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#147238 = ORIENTED_EDGE('',*,*,#147239,.T.); +#147239 = EDGE_CURVE('',#147231,#147240,#147242,.T.); +#147240 = VERTEX_POINT('',#147241); +#147241 = CARTESIAN_POINT('',(128.346129,-110.701062,1.585)); +#147242 = LINE('',#147243,#147244); +#147243 = CARTESIAN_POINT('',(128.347351,-110.523763,1.585)); +#147244 = VECTOR('',#147245,1.); +#147245 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#147246 = ORIENTED_EDGE('',*,*,#147247,.T.); +#147247 = EDGE_CURVE('',#147240,#147248,#147250,.T.); +#147248 = VERTEX_POINT('',#147249); +#147249 = CARTESIAN_POINT('',(128.097948,-110.945287,1.585)); +#147250 = CIRCLE('',#147251,0.348632345848); +#147251 = AXIS2_PLACEMENT_3D('',#147252,#147253,#147254); +#147252 = CARTESIAN_POINT('',(128.01017919403,-110.6078834593,1.585)); +#147253 = DIRECTION('',(0.,0.,-1.)); +#147254 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#147255 = ORIENTED_EDGE('',*,*,#147256,.T.); +#147256 = EDGE_CURVE('',#147248,#147257,#147259,.T.); +#147257 = VERTEX_POINT('',#147258); +#147258 = CARTESIAN_POINT('',(128.084431,-110.946618,1.585)); +#147259 = LINE('',#147260,#147261); +#147260 = CARTESIAN_POINT('',(128.097948,-110.945287,1.585)); +#147261 = VECTOR('',#147262,1.); +#147262 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#147263 = ORIENTED_EDGE('',*,*,#147264,.T.); +#147264 = EDGE_CURVE('',#147257,#147265,#147267,.T.); +#147265 = VERTEX_POINT('',#147266); +#147266 = CARTESIAN_POINT('',(128.342445,-111.317723,1.585)); +#147267 = LINE('',#147268,#147269); +#147268 = CARTESIAN_POINT('',(128.084431,-110.946618,1.585)); +#147269 = VECTOR('',#147270,1.); +#147270 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#147271 = ORIENTED_EDGE('',*,*,#147272,.T.); +#147272 = EDGE_CURVE('',#147265,#147273,#147275,.T.); +#147273 = VERTEX_POINT('',#147274); +#147274 = CARTESIAN_POINT('',(128.21235,-111.390929,1.585)); +#147275 = CIRCLE('',#147276,7.500005951703E-02); +#147276 = AXIS2_PLACEMENT_3D('',#147277,#147278,#147279); +#147277 = CARTESIAN_POINT('',(128.27379206294,-111.3479187473,1.585)); +#147278 = DIRECTION('',(0.,0.,-1.)); +#147279 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#147280 = ORIENTED_EDGE('',*,*,#147281,.T.); +#147281 = EDGE_CURVE('',#147273,#147282,#147284,.T.); +#147282 = VERTEX_POINT('',#147283); +#147283 = CARTESIAN_POINT('',(127.90141,-110.946728,1.585)); +#147284 = LINE('',#147285,#147286); +#147285 = CARTESIAN_POINT('',(128.21235,-111.390929,1.585)); +#147286 = VECTOR('',#147287,1.); +#147287 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#147288 = ORIENTED_EDGE('',*,*,#147289,.T.); +#147289 = EDGE_CURVE('',#147282,#147290,#147292,.T.); +#147290 = VERTEX_POINT('',#147291); +#147291 = CARTESIAN_POINT('',(127.777364,-110.946728,1.585)); +#147292 = LINE('',#147293,#147294); +#147293 = CARTESIAN_POINT('',(127.90141,-110.946728,1.585)); +#147294 = VECTOR('',#147295,1.); +#147295 = DIRECTION('',(-1.,0.,0.)); +#147296 = ORIENTED_EDGE('',*,*,#147297,.T.); +#147297 = EDGE_CURVE('',#147290,#147298,#147300,.T.); +#147298 = VERTEX_POINT('',#147299); +#147299 = CARTESIAN_POINT('',(127.775923,-111.362551,1.585)); +#147300 = LINE('',#147301,#147302); +#147301 = CARTESIAN_POINT('',(127.777364,-110.946728,1.585)); +#147302 = VECTOR('',#147303,1.); +#147303 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#147304 = ORIENTED_EDGE('',*,*,#147305,.T.); +#147305 = EDGE_CURVE('',#147298,#147306,#147308,.T.); +#147306 = VERTEX_POINT('',#147307); +#147307 = CARTESIAN_POINT('',(127.627364,-111.347919,1.585)); +#147308 = CIRCLE('',#147309,7.500006711464E-02); +#147309 = AXIS2_PLACEMENT_3D('',#147310,#147311,#147312); +#147310 = CARTESIAN_POINT('',(127.70236406711,-111.3479190671,1.585)); +#147311 = DIRECTION('',(-0.,0.,-1.)); +#147312 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#147313 = ORIENTED_EDGE('',*,*,#147314,.T.); +#147314 = EDGE_CURVE('',#147306,#147212,#147315,.T.); +#147315 = LINE('',#147316,#147317); +#147316 = CARTESIAN_POINT('',(127.627364,-111.347919,1.585)); +#147317 = VECTOR('',#147318,1.); +#147318 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#147319 = FACE_BOUND('',#147320,.F.); +#147320 = EDGE_LOOP('',(#147321,#147332,#147340,#147348,#147356,#147365) + ); +#147321 = ORIENTED_EDGE('',*,*,#147322,.T.); +#147322 = EDGE_CURVE('',#147323,#147325,#147327,.T.); +#147323 = VERTEX_POINT('',#147324); +#147324 = CARTESIAN_POINT('',(128.198792,-110.5561,1.585)); +#147325 = VERTEX_POINT('',#147326); +#147326 = CARTESIAN_POINT('',(128.065611,-110.422919,1.585)); +#147327 = CIRCLE('',#147328,0.18686440374); +#147328 = AXIS2_PLACEMENT_3D('',#147329,#147330,#147331); +#147329 = CARTESIAN_POINT('',(128.018075,-110.603636,1.585)); +#147330 = DIRECTION('',(0.,0.,1.)); +#147331 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#147332 = ORIENTED_EDGE('',*,*,#147333,.T.); +#147333 = EDGE_CURVE('',#147325,#147334,#147336,.T.); +#147334 = VERTEX_POINT('',#147335); +#147335 = CARTESIAN_POINT('',(127.777364,-110.422919,1.585)); +#147336 = LINE('',#147337,#147338); +#147337 = CARTESIAN_POINT('',(128.065611,-110.422919,1.585)); +#147338 = VECTOR('',#147339,1.); +#147339 = DIRECTION('',(-1.,0.,0.)); +#147340 = ORIENTED_EDGE('',*,*,#147341,.T.); +#147341 = EDGE_CURVE('',#147334,#147342,#147344,.T.); +#147342 = VERTEX_POINT('',#147343); +#147343 = CARTESIAN_POINT('',(127.777364,-110.796728,1.585)); +#147344 = LINE('',#147345,#147346); +#147345 = CARTESIAN_POINT('',(127.777364,-110.422919,1.585)); +#147346 = VECTOR('',#147347,1.); +#147347 = DIRECTION('',(0.,-1.,0.)); +#147348 = ORIENTED_EDGE('',*,*,#147349,.T.); +#147349 = EDGE_CURVE('',#147342,#147350,#147352,.T.); +#147350 = VERTEX_POINT('',#147351); +#147351 = CARTESIAN_POINT('',(128.065611,-110.796728,1.585)); +#147352 = LINE('',#147353,#147354); +#147353 = CARTESIAN_POINT('',(127.777364,-110.796728,1.585)); +#147354 = VECTOR('',#147355,1.); +#147355 = DIRECTION('',(1.,0.,0.)); +#147356 = ORIENTED_EDGE('',*,*,#147357,.T.); +#147357 = EDGE_CURVE('',#147350,#147358,#147360,.T.); +#147358 = VERTEX_POINT('',#147359); +#147359 = CARTESIAN_POINT('',(128.198792,-110.663547,1.585)); +#147360 = CIRCLE('',#147361,0.18686440374); +#147361 = AXIS2_PLACEMENT_3D('',#147362,#147363,#147364); +#147362 = CARTESIAN_POINT('',(128.018075,-110.616011,1.585)); +#147363 = DIRECTION('',(0.,0.,1.)); +#147364 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#147365 = ORIENTED_EDGE('',*,*,#147366,.T.); +#147366 = EDGE_CURVE('',#147358,#147323,#147367,.T.); +#147367 = LINE('',#147368,#147369); +#147368 = CARTESIAN_POINT('',(128.198792,-110.663547,1.585)); +#147369 = VECTOR('',#147370,1.); +#147370 = DIRECTION('',(0.,1.,0.)); +#147371 = PLANE('',#147372); +#147372 = AXIS2_PLACEMENT_3D('',#147373,#147374,#147375); +#147373 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147374 = DIRECTION('',(0.,0.,1.)); +#147375 = DIRECTION('',(1.,0.,-0.)); +#147376 = SHELL_BASED_SURFACE_MODEL('',(#147377)); +#147377 = OPEN_SHELL('',(#147378)); +#147378 = ADVANCED_FACE('',(#147379),#147471,.T.); +#147379 = FACE_BOUND('',#147380,.F.); +#147380 = EDGE_LOOP('',(#147381,#147392,#147400,#147408,#147416,#147425, + #147433,#147441,#147449,#147457,#147465)); +#147381 = ORIENTED_EDGE('',*,*,#147382,.T.); +#147382 = EDGE_CURVE('',#147383,#147385,#147387,.T.); +#147383 = VERTEX_POINT('',#147384); +#147384 = CARTESIAN_POINT('',(94.97022,-110.285559,1.585)); +#147385 = VERTEX_POINT('',#147386); +#147386 = CARTESIAN_POINT('',(95.086888,-110.347919,1.585)); +#147387 = CIRCLE('',#147388,7.500000000004E-02); +#147388 = AXIS2_PLACEMENT_3D('',#147389,#147390,#147391); +#147389 = CARTESIAN_POINT('',(95.011888,-110.3479190655,1.585)); +#147390 = DIRECTION('',(0.,0.,-1.)); +#147391 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#147392 = ORIENTED_EDGE('',*,*,#147393,.T.); +#147393 = EDGE_CURVE('',#147385,#147394,#147396,.T.); +#147394 = VERTEX_POINT('',#147395); +#147395 = CARTESIAN_POINT('',(95.086888,-111.187356,1.585)); +#147396 = LINE('',#147397,#147398); +#147397 = CARTESIAN_POINT('',(95.086888,-110.347919,1.585)); +#147398 = VECTOR('',#147399,1.); +#147399 = DIRECTION('',(0.,-1.,0.)); +#147400 = ORIENTED_EDGE('',*,*,#147401,.T.); +#147401 = EDGE_CURVE('',#147394,#147402,#147404,.T.); +#147402 = VERTEX_POINT('',#147403); +#147403 = CARTESIAN_POINT('',(95.115408,-111.244398,1.585)); +#147404 = LINE('',#147405,#147406); +#147405 = CARTESIAN_POINT('',(95.086888,-111.187356,1.585)); +#147406 = VECTOR('',#147407,1.); +#147407 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#147408 = ORIENTED_EDGE('',*,*,#147409,.T.); +#147409 = EDGE_CURVE('',#147402,#147410,#147412,.T.); +#147410 = VERTEX_POINT('',#147411); +#147411 = CARTESIAN_POINT('',(95.200729,-111.288669,1.585)); +#147412 = LINE('',#147413,#147414); +#147413 = CARTESIAN_POINT('',(95.115408,-111.244398,1.585)); +#147414 = VECTOR('',#147415,1.); +#147415 = DIRECTION('',(0.887624909794,-0.460567062992,0.)); +#147416 = ORIENTED_EDGE('',*,*,#147417,.T.); +#147417 = EDGE_CURVE('',#147410,#147418,#147420,.T.); +#147418 = VERTEX_POINT('',#147419); +#147419 = CARTESIAN_POINT('',(95.121204,-111.415001,1.585)); +#147420 = CIRCLE('',#147421,7.500029440362E-02); +#147421 = AXIS2_PLACEMENT_3D('',#147422,#147423,#147424); +#147422 = CARTESIAN_POINT('',(95.154745053971,-111.3479186486,1.585)); +#147423 = DIRECTION('',(0.,0.,-1.)); +#147424 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#147425 = ORIENTED_EDGE('',*,*,#147426,.T.); +#147426 = EDGE_CURVE('',#147418,#147427,#147429,.T.); +#147427 = VERTEX_POINT('',#147428); +#147428 = CARTESIAN_POINT('',(95.013523,-111.35955,1.585)); +#147429 = LINE('',#147430,#147431); +#147430 = CARTESIAN_POINT('',(95.121204,-111.415001,1.585)); +#147431 = VECTOR('',#147432,1.); +#147432 = DIRECTION('',(-0.889045233553,0.457819366887,0.)); +#147433 = ORIENTED_EDGE('',*,*,#147434,.T.); +#147434 = EDGE_CURVE('',#147427,#147435,#147437,.T.); +#147435 = VERTEX_POINT('',#147436); +#147436 = CARTESIAN_POINT('',(94.992425,-111.333841,1.585)); +#147437 = LINE('',#147438,#147439); +#147438 = CARTESIAN_POINT('',(95.013523,-111.35955,1.585)); +#147439 = VECTOR('',#147440,1.); +#147440 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#147441 = ORIENTED_EDGE('',*,*,#147442,.T.); +#147442 = EDGE_CURVE('',#147435,#147443,#147445,.T.); +#147443 = VERTEX_POINT('',#147444); +#147444 = CARTESIAN_POINT('',(94.938329,-111.219693,1.585)); +#147445 = LINE('',#147446,#147447); +#147446 = CARTESIAN_POINT('',(94.992425,-111.333841,1.585)); +#147447 = VECTOR('',#147448,1.); +#147448 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#147449 = ORIENTED_EDGE('',*,*,#147450,.T.); +#147450 = EDGE_CURVE('',#147443,#147451,#147453,.T.); +#147451 = VERTEX_POINT('',#147452); +#147452 = CARTESIAN_POINT('',(94.938329,-110.333287,1.585)); +#147453 = LINE('',#147454,#147455); +#147454 = CARTESIAN_POINT('',(94.938329,-111.219693,1.585)); +#147455 = VECTOR('',#147456,1.); +#147456 = DIRECTION('',(0.,1.,0.)); +#147457 = ORIENTED_EDGE('',*,*,#147458,.T.); +#147458 = EDGE_CURVE('',#147451,#147459,#147461,.T.); +#147459 = VERTEX_POINT('',#147460); +#147460 = CARTESIAN_POINT('',(94.949528,-110.306251,1.585)); +#147461 = LINE('',#147462,#147463); +#147462 = CARTESIAN_POINT('',(94.938329,-110.333287,1.585)); +#147463 = VECTOR('',#147464,1.); +#147464 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#147465 = ORIENTED_EDGE('',*,*,#147466,.T.); +#147466 = EDGE_CURVE('',#147459,#147383,#147467,.T.); +#147467 = LINE('',#147468,#147469); +#147468 = CARTESIAN_POINT('',(94.949528,-110.306251,1.585)); +#147469 = VECTOR('',#147470,1.); +#147470 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#147471 = PLANE('',#147472); +#147472 = AXIS2_PLACEMENT_3D('',#147473,#147474,#147475); +#147473 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147474 = DIRECTION('',(0.,0.,1.)); +#147475 = DIRECTION('',(1.,0.,-0.)); +#147476 = SHELL_BASED_SURFACE_MODEL('',(#147477)); +#147477 = OPEN_SHELL('',(#147478)); +#147478 = ADVANCED_FACE('',(#147479),#147664,.T.); +#147479 = FACE_BOUND('',#147480,.F.); +#147480 = EDGE_LOOP('',(#147481,#147492,#147500,#147509,#147517,#147526, + #147534,#147543,#147551,#147559,#147567,#147576,#147584,#147593, + #147601,#147610,#147618,#147626,#147634,#147642,#147650,#147658)); +#147481 = ORIENTED_EDGE('',*,*,#147482,.T.); +#147482 = EDGE_CURVE('',#147483,#147485,#147487,.T.); +#147483 = VERTEX_POINT('',#147484); +#147484 = CARTESIAN_POINT('',(117.808078,-110.330381,1.585)); +#147485 = VERTEX_POINT('',#147486); +#147486 = CARTESIAN_POINT('',(118.267841,-110.333178,1.585)); +#147487 = CIRCLE('',#147488,0.460785175821); +#147488 = AXIS2_PLACEMENT_3D('',#147489,#147490,#147491); +#147489 = CARTESIAN_POINT('',(118.03553010897,-110.7311159702,1.585)); +#147490 = DIRECTION('',(0.,0.,-1.)); +#147491 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#147492 = ORIENTED_EDGE('',*,*,#147493,.T.); +#147493 = EDGE_CURVE('',#147485,#147494,#147496,.T.); +#147494 = VERTEX_POINT('',#147495); +#147495 = CARTESIAN_POINT('',(118.336152,-110.401489,1.585)); +#147496 = LINE('',#147497,#147498); +#147497 = CARTESIAN_POINT('',(118.267841,-110.333178,1.585)); +#147498 = VECTOR('',#147499,1.); +#147499 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#147500 = ORIENTED_EDGE('',*,*,#147501,.T.); +#147501 = EDGE_CURVE('',#147494,#147502,#147504,.T.); +#147502 = VERTEX_POINT('',#147503); +#147503 = CARTESIAN_POINT('',(118.220759,-110.49619,1.585)); +#147504 = CIRCLE('',#147505,7.500003178655E-02); +#147505 = AXIS2_PLACEMENT_3D('',#147506,#147507,#147508); +#147506 = CARTESIAN_POINT('',(118.27379156212,-110.4431565,1.585)); +#147507 = DIRECTION('',(0.,0.,-1.)); +#147508 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#147509 = ORIENTED_EDGE('',*,*,#147510,.T.); +#147510 = EDGE_CURVE('',#147502,#147511,#147513,.T.); +#147511 = VERTEX_POINT('',#147512); +#147512 = CARTESIAN_POINT('',(118.185659,-110.46109,1.585)); +#147513 = LINE('',#147514,#147515); +#147514 = CARTESIAN_POINT('',(118.220759,-110.49619,1.585)); +#147515 = VECTOR('',#147516,1.); +#147516 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#147517 = ORIENTED_EDGE('',*,*,#147518,.T.); +#147518 = EDGE_CURVE('',#147511,#147519,#147521,.T.); +#147519 = VERTEX_POINT('',#147520); +#147520 = CARTESIAN_POINT('',(117.885735,-110.46109,1.585)); +#147521 = CIRCLE('',#147522,0.299308637371); +#147522 = AXIS2_PLACEMENT_3D('',#147523,#147524,#147525); +#147523 = CARTESIAN_POINT('',(118.035697,-110.720121,1.585)); +#147524 = DIRECTION('',(0.,0.,1.)); +#147525 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#147526 = ORIENTED_EDGE('',*,*,#147527,.T.); +#147527 = EDGE_CURVE('',#147519,#147528,#147530,.T.); +#147528 = VERTEX_POINT('',#147529); +#147529 = CARTESIAN_POINT('',(117.811622,-110.535203,1.585)); +#147530 = LINE('',#147531,#147532); +#147531 = CARTESIAN_POINT('',(117.885735,-110.46109,1.585)); +#147532 = VECTOR('',#147533,1.); +#147533 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#147534 = ORIENTED_EDGE('',*,*,#147535,.T.); +#147535 = EDGE_CURVE('',#147528,#147536,#147538,.T.); +#147536 = VERTEX_POINT('',#147537); +#147537 = CARTESIAN_POINT('',(117.729745,-110.910113,1.585)); +#147538 = CIRCLE('',#147539,0.611712714363); +#147539 = AXIS2_PLACEMENT_3D('',#147540,#147541,#147542); +#147540 = CARTESIAN_POINT('',(118.33815027521,-110.8465876822,1.585)); +#147541 = DIRECTION('',(0.,0.,1.)); +#147542 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#147543 = ORIENTED_EDGE('',*,*,#147544,.T.); +#147544 = EDGE_CURVE('',#147536,#147545,#147547,.T.); +#147545 = VERTEX_POINT('',#147546); +#147546 = CARTESIAN_POINT('',(117.773128,-111.083647,1.585)); +#147547 = LINE('',#147548,#147549); +#147548 = CARTESIAN_POINT('',(117.729745,-110.910113,1.585)); +#147549 = VECTOR('',#147550,1.); +#147550 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#147551 = ORIENTED_EDGE('',*,*,#147552,.T.); +#147552 = EDGE_CURVE('',#147545,#147553,#147555,.T.); +#147553 = VERTEX_POINT('',#147554); +#147554 = CARTESIAN_POINT('',(117.811622,-111.160634,1.585)); +#147555 = LINE('',#147556,#147557); +#147556 = CARTESIAN_POINT('',(117.773128,-111.083647,1.585)); +#147557 = VECTOR('',#147558,1.); +#147558 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#147559 = ORIENTED_EDGE('',*,*,#147560,.T.); +#147560 = EDGE_CURVE('',#147553,#147561,#147563,.T.); +#147561 = VERTEX_POINT('',#147562); +#147562 = CARTESIAN_POINT('',(117.885735,-111.234748,1.585)); +#147563 = LINE('',#147564,#147565); +#147564 = CARTESIAN_POINT('',(117.811622,-111.160634,1.585)); +#147565 = VECTOR('',#147566,1.); +#147566 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#147567 = ORIENTED_EDGE('',*,*,#147568,.T.); +#147568 = EDGE_CURVE('',#147561,#147569,#147571,.T.); +#147569 = VERTEX_POINT('',#147570); +#147570 = CARTESIAN_POINT('',(118.185659,-111.234747,1.585)); +#147571 = CIRCLE('',#147572,0.299305962385); +#147572 = AXIS2_PLACEMENT_3D('',#147573,#147574,#147575); +#147573 = CARTESIAN_POINT('',(118.03569613635,-110.9757195909,1.585)); +#147574 = DIRECTION('',(0.,0.,1.)); +#147575 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#147576 = ORIENTED_EDGE('',*,*,#147577,.T.); +#147577 = EDGE_CURVE('',#147569,#147578,#147580,.T.); +#147578 = VERTEX_POINT('',#147579); +#147579 = CARTESIAN_POINT('',(118.232124,-111.19032,1.585)); +#147580 = LINE('',#147581,#147582); +#147581 = CARTESIAN_POINT('',(118.185659,-111.234747,1.585)); +#147582 = VECTOR('',#147583,1.); +#147583 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#147584 = ORIENTED_EDGE('',*,*,#147585,.T.); +#147585 = EDGE_CURVE('',#147578,#147586,#147588,.T.); +#147586 = VERTEX_POINT('',#147587); +#147587 = CARTESIAN_POINT('',(118.326825,-111.305713,1.585)); +#147588 = CIRCLE('',#147589,7.499993690112E-02); +#147589 = AXIS2_PLACEMENT_3D('',#147590,#147591,#147592); +#147590 = CARTESIAN_POINT('',(118.2737922483,-111.2526798237,1.585)); +#147591 = DIRECTION('',(0.,0.,-1.)); +#147592 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#147593 = ORIENTED_EDGE('',*,*,#147594,.T.); +#147594 = EDGE_CURVE('',#147586,#147595,#147597,.T.); +#147595 = VERTEX_POINT('',#147596); +#147596 = CARTESIAN_POINT('',(118.263315,-111.365457,1.585)); +#147597 = LINE('',#147598,#147599); +#147598 = CARTESIAN_POINT('',(118.326825,-111.305713,1.585)); +#147599 = VECTOR('',#147600,1.); +#147600 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#147601 = ORIENTED_EDGE('',*,*,#147602,.T.); +#147602 = EDGE_CURVE('',#147595,#147603,#147605,.T.); +#147603 = VERTEX_POINT('',#147604); +#147604 = CARTESIAN_POINT('',(117.803553,-111.362661,1.585)); +#147605 = CIRCLE('',#147606,0.461067828848); +#147606 = AXIS2_PLACEMENT_3D('',#147607,#147608,#147609); +#147607 = CARTESIAN_POINT('',(118.03586451268,-110.9643961335,1.585)); +#147608 = DIRECTION('',(-0.,0.,-1.)); +#147609 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#147610 = ORIENTED_EDGE('',*,*,#147611,.T.); +#147611 = EDGE_CURVE('',#147603,#147612,#147614,.T.); +#147612 = VERTEX_POINT('',#147613); +#147613 = CARTESIAN_POINT('',(117.686864,-111.244898,1.585)); +#147614 = LINE('',#147615,#147616); +#147615 = CARTESIAN_POINT('',(117.803553,-111.362661,1.585)); +#147616 = VECTOR('',#147617,1.); +#147617 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#147618 = ORIENTED_EDGE('',*,*,#147619,.T.); +#147619 = EDGE_CURVE('',#147612,#147620,#147622,.T.); +#147620 = VERTEX_POINT('',#147621); +#147621 = CARTESIAN_POINT('',(117.629603,-111.128013,1.585)); +#147622 = LINE('',#147623,#147624); +#147623 = CARTESIAN_POINT('',(117.686864,-111.244898,1.585)); +#147624 = VECTOR('',#147625,1.); +#147625 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#147626 = ORIENTED_EDGE('',*,*,#147627,.T.); +#147627 = EDGE_CURVE('',#147620,#147628,#147630,.T.); +#147628 = VERTEX_POINT('',#147629); +#147629 = CARTESIAN_POINT('',(117.579745,-110.919347,1.585)); +#147630 = LINE('',#147631,#147632); +#147631 = CARTESIAN_POINT('',(117.629603,-111.128013,1.585)); +#147632 = VECTOR('',#147633,1.); +#147633 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#147634 = ORIENTED_EDGE('',*,*,#147635,.T.); +#147635 = EDGE_CURVE('',#147628,#147636,#147638,.T.); +#147636 = VERTEX_POINT('',#147637); +#147637 = CARTESIAN_POINT('',(117.581984,-110.7583,1.585)); +#147638 = LINE('',#147639,#147640); +#147639 = CARTESIAN_POINT('',(117.579745,-110.919347,1.585)); +#147640 = VECTOR('',#147641,1.); +#147641 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#147642 = ORIENTED_EDGE('',*,*,#147643,.T.); +#147643 = EDGE_CURVE('',#147636,#147644,#147646,.T.); +#147644 = VERTEX_POINT('',#147645); +#147645 = CARTESIAN_POINT('',(117.635282,-110.552473,1.585)); +#147646 = LINE('',#147647,#147648); +#147647 = CARTESIAN_POINT('',(117.581984,-110.7583,1.585)); +#147648 = VECTOR('',#147649,1.); +#147649 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#147650 = ORIENTED_EDGE('',*,*,#147651,.T.); +#147651 = EDGE_CURVE('',#147644,#147652,#147654,.T.); +#147652 = VERTEX_POINT('',#147653); +#147653 = CARTESIAN_POINT('',(117.692231,-110.443492,1.585)); +#147654 = LINE('',#147655,#147656); +#147655 = CARTESIAN_POINT('',(117.635282,-110.552473,1.585)); +#147656 = VECTOR('',#147657,1.); +#147657 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#147658 = ORIENTED_EDGE('',*,*,#147659,.T.); +#147659 = EDGE_CURVE('',#147652,#147483,#147660,.T.); +#147660 = LINE('',#147661,#147662); +#147661 = CARTESIAN_POINT('',(117.692231,-110.443492,1.585)); +#147662 = VECTOR('',#147663,1.); +#147663 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#147664 = PLANE('',#147665); +#147665 = AXIS2_PLACEMENT_3D('',#147666,#147667,#147668); +#147666 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147667 = DIRECTION('',(0.,0.,1.)); +#147668 = DIRECTION('',(1.,0.,-0.)); +#147669 = SHELL_BASED_SURFACE_MODEL('',(#147670)); +#147670 = OPEN_SHELL('',(#147671)); +#147671 = ADVANCED_FACE('',(#147672),#147857,.T.); +#147672 = FACE_BOUND('',#147673,.F.); +#147673 = EDGE_LOOP('',(#147674,#147685,#147693,#147702,#147710,#147719, + #147727,#147736,#147744,#147752,#147760,#147769,#147777,#147786, + #147794,#147803,#147811,#147819,#147827,#147835,#147843,#147851)); +#147674 = ORIENTED_EDGE('',*,*,#147675,.T.); +#147675 = EDGE_CURVE('',#147676,#147678,#147680,.T.); +#147676 = VERTEX_POINT('',#147677); +#147677 = CARTESIAN_POINT('',(135.831888,-110.330381,1.585)); +#147678 = VERTEX_POINT('',#147679); +#147679 = CARTESIAN_POINT('',(136.291651,-110.333178,1.585)); +#147680 = CIRCLE('',#147681,0.460785175821); +#147681 = AXIS2_PLACEMENT_3D('',#147682,#147683,#147684); +#147682 = CARTESIAN_POINT('',(136.05934010897,-110.7311159702,1.585)); +#147683 = DIRECTION('',(0.,0.,-1.)); +#147684 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#147685 = ORIENTED_EDGE('',*,*,#147686,.T.); +#147686 = EDGE_CURVE('',#147678,#147687,#147689,.T.); +#147687 = VERTEX_POINT('',#147688); +#147688 = CARTESIAN_POINT('',(136.359962,-110.401489,1.585)); +#147689 = LINE('',#147690,#147691); +#147690 = CARTESIAN_POINT('',(136.291651,-110.333178,1.585)); +#147691 = VECTOR('',#147692,1.); +#147692 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#147693 = ORIENTED_EDGE('',*,*,#147694,.T.); +#147694 = EDGE_CURVE('',#147687,#147695,#147697,.T.); +#147695 = VERTEX_POINT('',#147696); +#147696 = CARTESIAN_POINT('',(136.244569,-110.49619,1.585)); +#147697 = CIRCLE('',#147698,7.500003178655E-02); +#147698 = AXIS2_PLACEMENT_3D('',#147699,#147700,#147701); +#147699 = CARTESIAN_POINT('',(136.29760156212,-110.4431565,1.585)); +#147700 = DIRECTION('',(0.,0.,-1.)); +#147701 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#147702 = ORIENTED_EDGE('',*,*,#147703,.T.); +#147703 = EDGE_CURVE('',#147695,#147704,#147706,.T.); +#147704 = VERTEX_POINT('',#147705); +#147705 = CARTESIAN_POINT('',(136.209469,-110.46109,1.585)); +#147706 = LINE('',#147707,#147708); +#147707 = CARTESIAN_POINT('',(136.244569,-110.49619,1.585)); +#147708 = VECTOR('',#147709,1.); +#147709 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#147710 = ORIENTED_EDGE('',*,*,#147711,.T.); +#147711 = EDGE_CURVE('',#147704,#147712,#147714,.T.); +#147712 = VERTEX_POINT('',#147713); +#147713 = CARTESIAN_POINT('',(135.909545,-110.46109,1.585)); +#147714 = CIRCLE('',#147715,0.299308637371); +#147715 = AXIS2_PLACEMENT_3D('',#147716,#147717,#147718); +#147716 = CARTESIAN_POINT('',(136.059507,-110.720121,1.585)); +#147717 = DIRECTION('',(0.,0.,1.)); +#147718 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#147719 = ORIENTED_EDGE('',*,*,#147720,.T.); +#147720 = EDGE_CURVE('',#147712,#147721,#147723,.T.); +#147721 = VERTEX_POINT('',#147722); +#147722 = CARTESIAN_POINT('',(135.835432,-110.535203,1.585)); +#147723 = LINE('',#147724,#147725); +#147724 = CARTESIAN_POINT('',(135.909545,-110.46109,1.585)); +#147725 = VECTOR('',#147726,1.); +#147726 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#147727 = ORIENTED_EDGE('',*,*,#147728,.T.); +#147728 = EDGE_CURVE('',#147721,#147729,#147731,.T.); +#147729 = VERTEX_POINT('',#147730); +#147730 = CARTESIAN_POINT('',(135.753555,-110.910113,1.585)); +#147731 = CIRCLE('',#147732,0.611712714363); +#147732 = AXIS2_PLACEMENT_3D('',#147733,#147734,#147735); +#147733 = CARTESIAN_POINT('',(136.36196027521,-110.8465876822,1.585)); +#147734 = DIRECTION('',(0.,0.,1.)); +#147735 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#147736 = ORIENTED_EDGE('',*,*,#147737,.T.); +#147737 = EDGE_CURVE('',#147729,#147738,#147740,.T.); +#147738 = VERTEX_POINT('',#147739); +#147739 = CARTESIAN_POINT('',(135.796938,-111.083647,1.585)); +#147740 = LINE('',#147741,#147742); +#147741 = CARTESIAN_POINT('',(135.753555,-110.910113,1.585)); +#147742 = VECTOR('',#147743,1.); +#147743 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#147744 = ORIENTED_EDGE('',*,*,#147745,.T.); +#147745 = EDGE_CURVE('',#147738,#147746,#147748,.T.); +#147746 = VERTEX_POINT('',#147747); +#147747 = CARTESIAN_POINT('',(135.835432,-111.160634,1.585)); +#147748 = LINE('',#147749,#147750); +#147749 = CARTESIAN_POINT('',(135.796938,-111.083647,1.585)); +#147750 = VECTOR('',#147751,1.); +#147751 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#147752 = ORIENTED_EDGE('',*,*,#147753,.T.); +#147753 = EDGE_CURVE('',#147746,#147754,#147756,.T.); +#147754 = VERTEX_POINT('',#147755); +#147755 = CARTESIAN_POINT('',(135.909545,-111.234748,1.585)); +#147756 = LINE('',#147757,#147758); +#147757 = CARTESIAN_POINT('',(135.835432,-111.160634,1.585)); +#147758 = VECTOR('',#147759,1.); +#147759 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#147760 = ORIENTED_EDGE('',*,*,#147761,.T.); +#147761 = EDGE_CURVE('',#147754,#147762,#147764,.T.); +#147762 = VERTEX_POINT('',#147763); +#147763 = CARTESIAN_POINT('',(136.209469,-111.234747,1.585)); +#147764 = CIRCLE('',#147765,0.299305962385); +#147765 = AXIS2_PLACEMENT_3D('',#147766,#147767,#147768); +#147766 = CARTESIAN_POINT('',(136.05950613635,-110.9757195909,1.585)); +#147767 = DIRECTION('',(0.,0.,1.)); +#147768 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#147769 = ORIENTED_EDGE('',*,*,#147770,.T.); +#147770 = EDGE_CURVE('',#147762,#147771,#147773,.T.); +#147771 = VERTEX_POINT('',#147772); +#147772 = CARTESIAN_POINT('',(136.255934,-111.19032,1.585)); +#147773 = LINE('',#147774,#147775); +#147774 = CARTESIAN_POINT('',(136.209469,-111.234747,1.585)); +#147775 = VECTOR('',#147776,1.); +#147776 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#147777 = ORIENTED_EDGE('',*,*,#147778,.T.); +#147778 = EDGE_CURVE('',#147771,#147779,#147781,.T.); +#147779 = VERTEX_POINT('',#147780); +#147780 = CARTESIAN_POINT('',(136.350635,-111.305713,1.585)); +#147781 = CIRCLE('',#147782,7.499993690113E-02); +#147782 = AXIS2_PLACEMENT_3D('',#147783,#147784,#147785); +#147783 = CARTESIAN_POINT('',(136.2976022483,-111.2526798237,1.585)); +#147784 = DIRECTION('',(0.,0.,-1.)); +#147785 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#147786 = ORIENTED_EDGE('',*,*,#147787,.T.); +#147787 = EDGE_CURVE('',#147779,#147788,#147790,.T.); +#147788 = VERTEX_POINT('',#147789); +#147789 = CARTESIAN_POINT('',(136.287125,-111.365457,1.585)); +#147790 = LINE('',#147791,#147792); +#147791 = CARTESIAN_POINT('',(136.350635,-111.305713,1.585)); +#147792 = VECTOR('',#147793,1.); +#147793 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#147794 = ORIENTED_EDGE('',*,*,#147795,.T.); +#147795 = EDGE_CURVE('',#147788,#147796,#147798,.T.); +#147796 = VERTEX_POINT('',#147797); +#147797 = CARTESIAN_POINT('',(135.827363,-111.362661,1.585)); +#147798 = CIRCLE('',#147799,0.461067828848); +#147799 = AXIS2_PLACEMENT_3D('',#147800,#147801,#147802); +#147800 = CARTESIAN_POINT('',(136.05967451268,-110.9643961335,1.585)); +#147801 = DIRECTION('',(-0.,0.,-1.)); +#147802 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#147803 = ORIENTED_EDGE('',*,*,#147804,.T.); +#147804 = EDGE_CURVE('',#147796,#147805,#147807,.T.); +#147805 = VERTEX_POINT('',#147806); +#147806 = CARTESIAN_POINT('',(135.710674,-111.244898,1.585)); +#147807 = LINE('',#147808,#147809); +#147808 = CARTESIAN_POINT('',(135.827363,-111.362661,1.585)); +#147809 = VECTOR('',#147810,1.); +#147810 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#147811 = ORIENTED_EDGE('',*,*,#147812,.T.); +#147812 = EDGE_CURVE('',#147805,#147813,#147815,.T.); +#147813 = VERTEX_POINT('',#147814); +#147814 = CARTESIAN_POINT('',(135.653413,-111.128013,1.585)); +#147815 = LINE('',#147816,#147817); +#147816 = CARTESIAN_POINT('',(135.710674,-111.244898,1.585)); +#147817 = VECTOR('',#147818,1.); +#147818 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#147819 = ORIENTED_EDGE('',*,*,#147820,.T.); +#147820 = EDGE_CURVE('',#147813,#147821,#147823,.T.); +#147821 = VERTEX_POINT('',#147822); +#147822 = CARTESIAN_POINT('',(135.603555,-110.919347,1.585)); +#147823 = LINE('',#147824,#147825); +#147824 = CARTESIAN_POINT('',(135.653413,-111.128013,1.585)); +#147825 = VECTOR('',#147826,1.); +#147826 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#147827 = ORIENTED_EDGE('',*,*,#147828,.T.); +#147828 = EDGE_CURVE('',#147821,#147829,#147831,.T.); +#147829 = VERTEX_POINT('',#147830); +#147830 = CARTESIAN_POINT('',(135.605794,-110.7583,1.585)); +#147831 = LINE('',#147832,#147833); +#147832 = CARTESIAN_POINT('',(135.603555,-110.919347,1.585)); +#147833 = VECTOR('',#147834,1.); +#147834 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#147835 = ORIENTED_EDGE('',*,*,#147836,.T.); +#147836 = EDGE_CURVE('',#147829,#147837,#147839,.T.); +#147837 = VERTEX_POINT('',#147838); +#147838 = CARTESIAN_POINT('',(135.659092,-110.552473,1.585)); +#147839 = LINE('',#147840,#147841); +#147840 = CARTESIAN_POINT('',(135.605794,-110.7583,1.585)); +#147841 = VECTOR('',#147842,1.); +#147842 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#147843 = ORIENTED_EDGE('',*,*,#147844,.T.); +#147844 = EDGE_CURVE('',#147837,#147845,#147847,.T.); +#147845 = VERTEX_POINT('',#147846); +#147846 = CARTESIAN_POINT('',(135.716041,-110.443492,1.585)); +#147847 = LINE('',#147848,#147849); +#147848 = CARTESIAN_POINT('',(135.659092,-110.552473,1.585)); +#147849 = VECTOR('',#147850,1.); +#147850 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#147851 = ORIENTED_EDGE('',*,*,#147852,.T.); +#147852 = EDGE_CURVE('',#147845,#147676,#147853,.T.); +#147853 = LINE('',#147854,#147855); +#147854 = CARTESIAN_POINT('',(135.716041,-110.443492,1.585)); +#147855 = VECTOR('',#147856,1.); +#147856 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#147857 = PLANE('',#147858); +#147858 = AXIS2_PLACEMENT_3D('',#147859,#147860,#147861); +#147859 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147860 = DIRECTION('',(0.,0.,1.)); +#147861 = DIRECTION('',(1.,0.,-0.)); +#147862 = SHELL_BASED_SURFACE_MODEL('',(#147863)); +#147863 = OPEN_SHELL('',(#147864)); +#147864 = ADVANCED_FACE('',(#147865),#147926,.T.); +#147865 = FACE_BOUND('',#147866,.F.); +#147866 = EDGE_LOOP('',(#147867,#147878,#147886,#147895,#147903,#147912, + #147920)); +#147867 = ORIENTED_EDGE('',*,*,#147868,.T.); +#147868 = EDGE_CURVE('',#147869,#147871,#147873,.T.); +#147869 = VERTEX_POINT('',#147870); +#147870 = CARTESIAN_POINT('',(103.068685,-110.421478,1.585)); +#147871 = VERTEX_POINT('',#147872); +#147872 = CARTESIAN_POINT('',(103.083317,-110.272919,1.585)); +#147873 = CIRCLE('',#147874,7.500006711463E-02); +#147874 = AXIS2_PLACEMENT_3D('',#147875,#147876,#147877); +#147875 = CARTESIAN_POINT('',(103.08331693288,-110.3479190671,1.585)); +#147876 = DIRECTION('',(0.,0.,-1.)); +#147877 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#147878 = ORIENTED_EDGE('',*,*,#147879,.T.); +#147879 = EDGE_CURVE('',#147871,#147880,#147882,.T.); +#147880 = VERTEX_POINT('',#147881); +#147881 = CARTESIAN_POINT('',(103.764615,-110.27436,1.585)); +#147882 = LINE('',#147883,#147884); +#147883 = CARTESIAN_POINT('',(103.083317,-110.272919,1.585)); +#147884 = VECTOR('',#147885,1.); +#147885 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#147886 = ORIENTED_EDGE('',*,*,#147887,.T.); +#147887 = EDGE_CURVE('',#147880,#147888,#147890,.T.); +#147888 = VERTEX_POINT('',#147889); +#147889 = CARTESIAN_POINT('',(103.818919,-110.377463,1.585)); +#147890 = CIRCLE('',#147891,7.500015546833E-02); +#147891 = AXIS2_PLACEMENT_3D('',#147892,#147893,#147894); +#147892 = CARTESIAN_POINT('',(103.74998297422,-110.3479190044,1.585)); +#147893 = DIRECTION('',(0.,0.,-1.)); +#147894 = DIRECTION('',(0.195093272598,0.980784693491,0.)); +#147895 = ORIENTED_EDGE('',*,*,#147896,.T.); +#147896 = EDGE_CURVE('',#147888,#147897,#147899,.T.); +#147897 = VERTEX_POINT('',#147898); +#147898 = CARTESIAN_POINT('',(103.38326,-111.390344,1.585)); +#147899 = LINE('',#147900,#147901); +#147900 = CARTESIAN_POINT('',(103.818919,-110.377463,1.585)); +#147901 = VECTOR('',#147902,1.); +#147902 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#147903 = ORIENTED_EDGE('',*,*,#147904,.T.); +#147904 = EDGE_CURVE('',#147897,#147905,#147907,.T.); +#147905 = VERTEX_POINT('',#147906); +#147906 = CARTESIAN_POINT('',(103.252476,-111.318375,1.585)); +#147907 = CIRCLE('',#147908,7.500030178421E-02); +#147908 = AXIS2_PLACEMENT_3D('',#147909,#147910,#147911); +#147909 = CARTESIAN_POINT('',(103.32141234698,-111.3479186174,1.585)); +#147910 = DIRECTION('',(-0.,0.,-1.)); +#147911 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#147912 = ORIENTED_EDGE('',*,*,#147913,.T.); +#147913 = EDGE_CURVE('',#147905,#147914,#147916,.T.); +#147914 = VERTEX_POINT('',#147915); +#147915 = CARTESIAN_POINT('',(103.636242,-110.422919,1.585)); +#147916 = LINE('',#147917,#147918); +#147917 = CARTESIAN_POINT('',(103.252476,-111.318375,1.585)); +#147918 = VECTOR('',#147919,1.); +#147919 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#147920 = ORIENTED_EDGE('',*,*,#147921,.T.); +#147921 = EDGE_CURVE('',#147914,#147869,#147922,.T.); +#147922 = LINE('',#147923,#147924); +#147923 = CARTESIAN_POINT('',(103.636242,-110.422919,1.585)); +#147924 = VECTOR('',#147925,1.); +#147925 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#147926 = PLANE('',#147927); +#147927 = AXIS2_PLACEMENT_3D('',#147928,#147929,#147930); +#147928 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147929 = DIRECTION('',(0.,0.,1.)); +#147930 = DIRECTION('',(1.,0.,-0.)); +#147931 = SHELL_BASED_SURFACE_MODEL('',(#147932)); +#147932 = OPEN_SHELL('',(#147933)); +#147933 = ADVANCED_FACE('',(#147934),#148129,.T.); +#147934 = FACE_BOUND('',#147935,.F.); +#147935 = EDGE_LOOP('',(#147936,#147947,#147955,#147964,#147972,#147980, + #147988,#147996,#148005,#148013,#148022,#148030,#148038,#148046, + #148055,#148063,#148072,#148080,#148089,#148097,#148106,#148114, + #148123)); +#147936 = ORIENTED_EDGE('',*,*,#147937,.T.); +#147937 = EDGE_CURVE('',#147938,#147940,#147942,.T.); +#147938 = VERTEX_POINT('',#147939); +#147939 = CARTESIAN_POINT('',(92.431817,-110.32604,1.585)); +#147940 = VERTEX_POINT('',#147941); +#147941 = CARTESIAN_POINT('',(92.503555,-110.272919,1.585)); +#147942 = CIRCLE('',#147943,7.50033610077E-02); +#147943 = AXIS2_PLACEMENT_3D('',#147944,#147945,#147946); +#147944 = CARTESIAN_POINT('',(92.503557270704,-110.3479223609,1.585)); +#147945 = DIRECTION('',(0.,0.,-1.)); +#147946 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#147947 = ORIENTED_EDGE('',*,*,#147948,.T.); +#147948 = EDGE_CURVE('',#147940,#147949,#147951,.T.); +#147949 = VERTEX_POINT('',#147950); +#147950 = CARTESIAN_POINT('',(92.994377,-110.27436,1.585)); +#147951 = LINE('',#147952,#147953); +#147952 = CARTESIAN_POINT('',(92.503555,-110.272919,1.585)); +#147953 = VECTOR('',#147954,1.); +#147954 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#147955 = ORIENTED_EDGE('',*,*,#147956,.T.); +#147956 = EDGE_CURVE('',#147949,#147957,#147959,.T.); +#147957 = VERTEX_POINT('',#147958); +#147958 = CARTESIAN_POINT('',(92.979745,-110.422919,1.585)); +#147959 = CIRCLE('',#147960,7.500006711464E-02); +#147960 = AXIS2_PLACEMENT_3D('',#147961,#147962,#147963); +#147961 = CARTESIAN_POINT('',(92.979745067115,-110.3479189328,1.585)); +#147962 = DIRECTION('',(0.,0.,-1.)); +#147963 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#147964 = ORIENTED_EDGE('',*,*,#147965,.T.); +#147965 = EDGE_CURVE('',#147957,#147966,#147968,.T.); +#147966 = VERTEX_POINT('',#147967); +#147967 = CARTESIAN_POINT('',(92.571429,-110.422919,1.585)); +#147968 = LINE('',#147969,#147970); +#147969 = CARTESIAN_POINT('',(92.979745,-110.422919,1.585)); +#147970 = VECTOR('',#147971,1.); +#147971 = DIRECTION('',(-1.,0.,0.)); +#147972 = ORIENTED_EDGE('',*,*,#147973,.T.); +#147973 = EDGE_CURVE('',#147966,#147974,#147976,.T.); +#147974 = VERTEX_POINT('',#147975); +#147975 = CARTESIAN_POINT('',(92.54661,-110.671109,1.585)); +#147976 = LINE('',#147977,#147978); +#147977 = CARTESIAN_POINT('',(92.571429,-110.422919,1.585)); +#147978 = VECTOR('',#147979,1.); +#147979 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#147980 = ORIENTED_EDGE('',*,*,#147981,.T.); +#147981 = EDGE_CURVE('',#147974,#147982,#147984,.T.); +#147982 = VERTEX_POINT('',#147983); +#147983 = CARTESIAN_POINT('',(92.584161,-110.655312,1.585)); +#147984 = LINE('',#147985,#147986); +#147985 = CARTESIAN_POINT('',(92.54661,-110.671109,1.585)); +#147986 = VECTOR('',#147987,1.); +#147987 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#147988 = ORIENTED_EDGE('',*,*,#147989,.T.); +#147989 = EDGE_CURVE('',#147982,#147990,#147992,.T.); +#147990 = VERTEX_POINT('',#147991); +#147991 = CARTESIAN_POINT('',(92.856697,-110.656534,1.585)); +#147992 = LINE('',#147993,#147994); +#147993 = CARTESIAN_POINT('',(92.584161,-110.655312,1.585)); +#147994 = VECTOR('',#147995,1.); +#147995 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#147996 = ORIENTED_EDGE('',*,*,#147997,.T.); +#147997 = EDGE_CURVE('',#147990,#147998,#148000,.T.); +#147998 = VERTEX_POINT('',#147999); +#147999 = CARTESIAN_POINT('',(93.100923,-110.904715,1.585)); +#148000 = CIRCLE('',#148001,0.348625649748); +#148001 = AXIS2_PLACEMENT_3D('',#148002,#148003,#148004); +#148002 = CARTESIAN_POINT('',(92.763525045865,-110.9924786838,1.585)); +#148003 = DIRECTION('',(0.,0.,-1.)); +#148004 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#148005 = ORIENTED_EDGE('',*,*,#148006,.T.); +#148006 = EDGE_CURVE('',#147998,#148007,#148009,.T.); +#148007 = VERTEX_POINT('',#148008); +#148008 = CARTESIAN_POINT('',(93.099701,-111.177252,1.585)); +#148009 = LINE('',#148010,#148011); +#148010 = CARTESIAN_POINT('',(93.100923,-110.904715,1.585)); +#148011 = VECTOR('',#148012,1.); +#148012 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#148013 = ORIENTED_EDGE('',*,*,#148014,.T.); +#148014 = EDGE_CURVE('',#148007,#148015,#148017,.T.); +#148015 = VERTEX_POINT('',#148016); +#148016 = CARTESIAN_POINT('',(92.85152,-111.421478,1.585)); +#148017 = CIRCLE('',#148018,0.348635327447); +#148018 = AXIS2_PLACEMENT_3D('',#148019,#148020,#148021); +#148019 = CARTESIAN_POINT('',(92.763748481291,-111.0840720841,1.585)); +#148020 = DIRECTION('',(0.,0.,-1.)); +#148021 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#148022 = ORIENTED_EDGE('',*,*,#148023,.T.); +#148023 = EDGE_CURVE('',#148015,#148024,#148026,.T.); +#148024 = VERTEX_POINT('',#148025); +#148025 = CARTESIAN_POINT('',(92.578983,-111.420256,1.585)); +#148026 = LINE('',#148027,#148028); +#148027 = CARTESIAN_POINT('',(92.85152,-111.421478,1.585)); +#148028 = VECTOR('',#148029,1.); +#148029 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#148030 = ORIENTED_EDGE('',*,*,#148031,.T.); +#148031 = EDGE_CURVE('',#148024,#148032,#148034,.T.); +#148032 = VERTEX_POINT('',#148033); +#148033 = CARTESIAN_POINT('',(92.45627,-111.35805,1.585)); +#148034 = LINE('',#148035,#148036); +#148035 = CARTESIAN_POINT('',(92.578983,-111.420256,1.585)); +#148036 = VECTOR('',#148037,1.); +#148037 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#148038 = ORIENTED_EDGE('',*,*,#148039,.T.); +#148039 = EDGE_CURVE('',#148032,#148040,#148042,.T.); +#148040 = VERTEX_POINT('',#148041); +#148041 = CARTESIAN_POINT('',(92.393575,-111.294347,1.585)); +#148042 = LINE('',#148043,#148044); +#148043 = CARTESIAN_POINT('',(92.45627,-111.35805,1.585)); +#148044 = VECTOR('',#148045,1.); +#148045 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#148046 = ORIENTED_EDGE('',*,*,#148047,.T.); +#148047 = EDGE_CURVE('',#148040,#148048,#148050,.T.); +#148048 = VERTEX_POINT('',#148049); +#148049 = CARTESIAN_POINT('',(92.50897,-111.199648,1.585)); +#148050 = CIRCLE('',#148051,7.50001266804E-02); +#148051 = AXIS2_PLACEMENT_3D('',#148052,#148053,#148054); +#148052 = CARTESIAN_POINT('',(92.455936051994,-111.2526802483,1.585)); +#148053 = DIRECTION('',(0.,0.,-1.)); +#148054 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#148055 = ORIENTED_EDGE('',*,*,#148056,.T.); +#148056 = EDGE_CURVE('',#148048,#148057,#148059,.T.); +#148057 = VERTEX_POINT('',#148058); +#148058 = CARTESIAN_POINT('',(92.547982,-111.238661,1.585)); +#148059 = LINE('',#148060,#148061); +#148060 = CARTESIAN_POINT('',(92.50897,-111.199648,1.585)); +#148061 = VECTOR('',#148062,1.); +#148062 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#148063 = ORIENTED_EDGE('',*,*,#148064,.T.); +#148064 = EDGE_CURVE('',#148057,#148065,#148067,.T.); +#148065 = VERTEX_POINT('',#148066); +#148066 = CARTESIAN_POINT('',(92.887698,-111.238661,1.585)); +#148067 = CIRCLE('',#148068,0.305620374329); +#148068 = AXIS2_PLACEMENT_3D('',#148069,#148070,#148071); +#148069 = CARTESIAN_POINT('',(92.71784,-110.98459,1.585)); +#148070 = DIRECTION('',(0.,0.,1.)); +#148071 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#148072 = ORIENTED_EDGE('',*,*,#148073,.T.); +#148073 = EDGE_CURVE('',#148065,#148074,#148076,.T.); +#148074 = VERTEX_POINT('',#148075); +#148075 = CARTESIAN_POINT('',(92.918105,-111.208253,1.585)); +#148076 = LINE('',#148077,#148078); +#148077 = CARTESIAN_POINT('',(92.887698,-111.238661,1.585)); +#148078 = VECTOR('',#148079,1.); +#148079 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#148080 = ORIENTED_EDGE('',*,*,#148081,.T.); +#148081 = EDGE_CURVE('',#148074,#148082,#148084,.T.); +#148082 = VERTEX_POINT('',#148083); +#148083 = CARTESIAN_POINT('',(92.918106,-110.868536,1.585)); +#148084 = CIRCLE('',#148085,0.305616146029); +#148085 = AXIS2_PLACEMENT_3D('',#148086,#148087,#148088); +#148086 = CARTESIAN_POINT('',(92.664039920493,-111.0383937521,1.585)); +#148087 = DIRECTION('',(0.,-0.,1.)); +#148088 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#148089 = ORIENTED_EDGE('',*,*,#148090,.T.); +#148090 = EDGE_CURVE('',#148082,#148091,#148093,.T.); +#148091 = VERTEX_POINT('',#148092); +#148092 = CARTESIAN_POINT('',(92.887699,-110.838129,1.585)); +#148093 = LINE('',#148094,#148095); +#148094 = CARTESIAN_POINT('',(92.918106,-110.868536,1.585)); +#148095 = VECTOR('',#148096,1.); +#148096 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#148097 = ORIENTED_EDGE('',*,*,#148098,.T.); +#148098 = EDGE_CURVE('',#148091,#148099,#148101,.T.); +#148099 = VERTEX_POINT('',#148100); +#148100 = CARTESIAN_POINT('',(92.547982,-110.838129,1.585)); +#148101 = CIRCLE('',#148102,0.305621483548); +#148102 = AXIS2_PLACEMENT_3D('',#148103,#148104,#148105); +#148103 = CARTESIAN_POINT('',(92.7178405,-111.092201,1.585)); +#148104 = DIRECTION('',(0.,0.,1.)); +#148105 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#148106 = ORIENTED_EDGE('',*,*,#148107,.T.); +#148107 = EDGE_CURVE('',#148099,#148108,#148110,.T.); +#148108 = VERTEX_POINT('',#148109); +#148109 = CARTESIAN_POINT('',(92.491192,-110.890306,1.585)); +#148110 = LINE('',#148111,#148112); +#148111 = CARTESIAN_POINT('',(92.547982,-110.838129,1.585)); +#148112 = VECTOR('',#148113,1.); +#148113 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#148114 = ORIENTED_EDGE('',*,*,#148115,.T.); +#148115 = EDGE_CURVE('',#148108,#148116,#148118,.T.); +#148116 = VERTEX_POINT('',#148117); +#148117 = CARTESIAN_POINT('',(92.381286,-110.831349,1.585)); +#148118 = CIRCLE('',#148119,7.500024172471E-02); +#148119 = AXIS2_PLACEMENT_3D('',#148120,#148121,#148122); +#148120 = CARTESIAN_POINT('',(92.455935970023,-110.8241089561,1.585)); +#148121 = DIRECTION('',(-0.,0.,-1.)); +#148122 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#148123 = ORIENTED_EDGE('',*,*,#148124,.T.); +#148124 = EDGE_CURVE('',#148116,#147938,#148125,.T.); +#148125 = LINE('',#148126,#148127); +#148126 = CARTESIAN_POINT('',(92.381286,-110.831349,1.585)); +#148127 = VECTOR('',#148128,1.); +#148128 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#148129 = PLANE('',#148130); +#148130 = AXIS2_PLACEMENT_3D('',#148131,#148132,#148133); +#148131 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148132 = DIRECTION('',(0.,0.,1.)); +#148133 = DIRECTION('',(1.,0.,-0.)); +#148134 = SHELL_BASED_SURFACE_MODEL('',(#148135)); +#148135 = OPEN_SHELL('',(#148136)); +#148136 = ADVANCED_FACE('',(#148137,#148309),#148360,.T.); +#148137 = FACE_BOUND('',#148138,.F.); +#148138 = EDGE_LOOP('',(#148139,#148150,#148158,#148166,#148174,#148182, + #148190,#148198,#148206,#148214,#148222,#148230,#148238,#148247, + #148255,#148263,#148271,#148279,#148287,#148295,#148303)); +#148139 = ORIENTED_EDGE('',*,*,#148140,.T.); +#148140 = EDGE_CURVE('',#148141,#148143,#148145,.T.); +#148141 = VERTEX_POINT('',#148142); +#148142 = CARTESIAN_POINT('',(95.502157,-110.661789,1.585)); +#148143 = VERTEX_POINT('',#148144); +#148144 = CARTESIAN_POINT('',(95.962634,-110.669621,1.585)); +#148145 = CIRCLE('',#148146,0.398777683503); +#148146 = AXIS2_PLACEMENT_3D('',#148147,#148148,#148149); +#148147 = CARTESIAN_POINT('',(95.726858788855,-110.991232086,1.585)); +#148148 = DIRECTION('',(0.,0.,-1.)); +#148149 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#148150 = ORIENTED_EDGE('',*,*,#148151,.T.); +#148151 = EDGE_CURVE('',#148143,#148152,#148154,.T.); +#148152 = VERTEX_POINT('',#148153); +#148153 = CARTESIAN_POINT('',(95.983732,-110.69533,1.585)); +#148154 = LINE('',#148155,#148156); +#148155 = CARTESIAN_POINT('',(95.962634,-110.669621,1.585)); +#148156 = VECTOR('',#148157,1.); +#148157 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#148158 = ORIENTED_EDGE('',*,*,#148159,.T.); +#148159 = EDGE_CURVE('',#148152,#148160,#148162,.T.); +#148160 = VERTEX_POINT('',#148161); +#148161 = CARTESIAN_POINT('',(96.037828,-110.809477,1.585)); +#148162 = LINE('',#148163,#148164); +#148163 = CARTESIAN_POINT('',(95.983732,-110.69533,1.585)); +#148164 = VECTOR('',#148165,1.); +#148165 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#148166 = ORIENTED_EDGE('',*,*,#148167,.T.); +#148167 = EDGE_CURVE('',#148160,#148168,#148170,.T.); +#148168 = VERTEX_POINT('',#148169); +#148169 = CARTESIAN_POINT('',(96.037828,-110.933979,1.585)); +#148170 = LINE('',#148171,#148172); +#148171 = CARTESIAN_POINT('',(96.037828,-110.809477,1.585)); +#148172 = VECTOR('',#148173,1.); +#148173 = DIRECTION('',(0.,-1.,0.)); +#148174 = ORIENTED_EDGE('',*,*,#148175,.T.); +#148175 = EDGE_CURVE('',#148168,#148176,#148178,.T.); +#148176 = VERTEX_POINT('',#148177); +#148177 = CARTESIAN_POINT('',(96.017357,-110.972324,1.585)); +#148178 = LINE('',#148179,#148180); +#148179 = CARTESIAN_POINT('',(96.037828,-110.933979,1.585)); +#148180 = VECTOR('',#148181,1.); +#148181 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#148182 = ORIENTED_EDGE('',*,*,#148183,.T.); +#148183 = EDGE_CURVE('',#148176,#148184,#148186,.T.); +#148184 = VERTEX_POINT('',#148185); +#148185 = CARTESIAN_POINT('',(95.978977,-110.992891,1.585)); +#148186 = LINE('',#148187,#148188); +#148187 = CARTESIAN_POINT('',(96.017357,-110.972324,1.585)); +#148188 = VECTOR('',#148189,1.); +#148189 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#148190 = ORIENTED_EDGE('',*,*,#148191,.T.); +#148191 = EDGE_CURVE('',#148184,#148192,#148194,.T.); +#148192 = VERTEX_POINT('',#148193); +#148193 = CARTESIAN_POINT('',(95.563079,-111.07607,1.585)); +#148194 = LINE('',#148195,#148196); +#148195 = CARTESIAN_POINT('',(95.978977,-110.992891,1.585)); +#148196 = VECTOR('',#148197,1.); +#148197 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#148198 = ORIENTED_EDGE('',*,*,#148199,.T.); +#148199 = EDGE_CURVE('',#148192,#148200,#148202,.T.); +#148200 = VERTEX_POINT('',#148201); +#148201 = CARTESIAN_POINT('',(95.563079,-111.187356,1.585)); +#148202 = LINE('',#148203,#148204); +#148203 = CARTESIAN_POINT('',(95.563079,-111.07607,1.585)); +#148204 = VECTOR('',#148205,1.); +#148205 = DIRECTION('',(0.,-1.,0.)); +#148206 = ORIENTED_EDGE('',*,*,#148207,.T.); +#148207 = EDGE_CURVE('',#148200,#148208,#148210,.T.); +#148208 = VERTEX_POINT('',#148209); +#148209 = CARTESIAN_POINT('',(95.591599,-111.244398,1.585)); +#148210 = LINE('',#148211,#148212); +#148211 = CARTESIAN_POINT('',(95.563079,-111.187356,1.585)); +#148212 = VECTOR('',#148213,1.); +#148213 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#148214 = ORIENTED_EDGE('',*,*,#148215,.T.); +#148215 = EDGE_CURVE('',#148208,#148216,#148218,.T.); +#148216 = VERTEX_POINT('',#148217); +#148217 = CARTESIAN_POINT('',(95.648641,-111.272919,1.585)); +#148218 = LINE('',#148219,#148220); +#148219 = CARTESIAN_POINT('',(95.591599,-111.244398,1.585)); +#148220 = VECTOR('',#148221,1.); +#148221 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#148222 = ORIENTED_EDGE('',*,*,#148223,.T.); +#148223 = EDGE_CURVE('',#148216,#148224,#148226,.T.); +#148224 = VERTEX_POINT('',#148225); +#148225 = CARTESIAN_POINT('',(95.803707,-111.272919,1.585)); +#148226 = LINE('',#148227,#148228); +#148227 = CARTESIAN_POINT('',(95.648641,-111.272919,1.585)); +#148228 = VECTOR('',#148229,1.); +#148229 = DIRECTION('',(1.,0.,0.)); +#148230 = ORIENTED_EDGE('',*,*,#148231,.T.); +#148231 = EDGE_CURVE('',#148224,#148232,#148234,.T.); +#148232 = VERTEX_POINT('',#148233); +#148233 = CARTESIAN_POINT('',(95.89684,-111.227963,1.585)); +#148234 = LINE('',#148235,#148236); +#148235 = CARTESIAN_POINT('',(95.803707,-111.272919,1.585)); +#148236 = VECTOR('',#148237,1.); +#148237 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#148238 = ORIENTED_EDGE('',*,*,#148239,.T.); +#148239 = EDGE_CURVE('',#148232,#148240,#148242,.T.); +#148240 = VERTEX_POINT('',#148241); +#148241 = CARTESIAN_POINT('',(95.950191,-111.367382,1.585)); +#148242 = CIRCLE('',#148243,7.500029440469E-02); +#148243 = AXIS2_PLACEMENT_3D('',#148244,#148245,#148246); +#148244 = CARTESIAN_POINT('',(95.916649351323,-111.300299946,1.585)); +#148245 = DIRECTION('',(0.,0.,-1.)); +#148246 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#148247 = ORIENTED_EDGE('',*,*,#148248,.T.); +#148248 = EDGE_CURVE('',#148240,#148249,#148251,.T.); +#148249 = VERTEX_POINT('',#148250); +#148250 = CARTESIAN_POINT('',(95.836044,-111.421478,1.585)); +#148251 = LINE('',#148252,#148253); +#148252 = CARTESIAN_POINT('',(95.950191,-111.367382,1.585)); +#148253 = VECTOR('',#148254,1.); +#148254 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#148255 = ORIENTED_EDGE('',*,*,#148256,.T.); +#148256 = EDGE_CURVE('',#148249,#148257,#148259,.T.); +#148257 = VERTEX_POINT('',#148258); +#148258 = CARTESIAN_POINT('',(95.611126,-111.420256,1.585)); +#148259 = LINE('',#148260,#148261); +#148260 = CARTESIAN_POINT('',(95.836044,-111.421478,1.585)); +#148261 = VECTOR('',#148262,1.); +#148262 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#148263 = ORIENTED_EDGE('',*,*,#148264,.T.); +#148264 = EDGE_CURVE('',#148257,#148265,#148267,.T.); +#148265 = VERTEX_POINT('',#148266); +#148266 = CARTESIAN_POINT('',(95.489714,-111.35955,1.585)); +#148267 = LINE('',#148268,#148269); +#148268 = CARTESIAN_POINT('',(95.611126,-111.420256,1.585)); +#148269 = VECTOR('',#148270,1.); +#148270 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#148271 = ORIENTED_EDGE('',*,*,#148272,.T.); +#148272 = EDGE_CURVE('',#148265,#148273,#148275,.T.); +#148273 = VERTEX_POINT('',#148274); +#148274 = CARTESIAN_POINT('',(95.468616,-111.333841,1.585)); +#148275 = LINE('',#148276,#148277); +#148276 = CARTESIAN_POINT('',(95.489714,-111.35955,1.585)); +#148277 = VECTOR('',#148278,1.); +#148278 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#148279 = ORIENTED_EDGE('',*,*,#148280,.T.); +#148280 = EDGE_CURVE('',#148273,#148281,#148283,.T.); +#148281 = VERTEX_POINT('',#148282); +#148282 = CARTESIAN_POINT('',(95.41452,-111.219693,1.585)); +#148283 = LINE('',#148284,#148285); +#148284 = CARTESIAN_POINT('',(95.468616,-111.333841,1.585)); +#148285 = VECTOR('',#148286,1.); +#148286 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#148287 = ORIENTED_EDGE('',*,*,#148288,.T.); +#148288 = EDGE_CURVE('',#148281,#148289,#148291,.T.); +#148289 = VERTEX_POINT('',#148290); +#148290 = CARTESIAN_POINT('',(95.415742,-110.8043,1.585)); +#148291 = LINE('',#148292,#148293); +#148292 = CARTESIAN_POINT('',(95.41452,-111.219693,1.585)); +#148293 = VECTOR('',#148294,1.); +#148294 = DIRECTION('',(2.941779741959E-03,0.999995672957,0.)); +#148295 = ORIENTED_EDGE('',*,*,#148296,.T.); +#148296 = EDGE_CURVE('',#148289,#148297,#148299,.T.); +#148297 = VERTEX_POINT('',#148298); +#148298 = CARTESIAN_POINT('',(95.476448,-110.682887,1.585)); +#148299 = LINE('',#148300,#148301); +#148300 = CARTESIAN_POINT('',(95.415742,-110.8043,1.585)); +#148301 = VECTOR('',#148302,1.); +#148302 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#148303 = ORIENTED_EDGE('',*,*,#148304,.T.); +#148304 = EDGE_CURVE('',#148297,#148141,#148305,.T.); +#148305 = LINE('',#148306,#148307); +#148306 = CARTESIAN_POINT('',(95.476448,-110.682887,1.585)); +#148307 = VECTOR('',#148308,1.); +#148308 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#148309 = FACE_BOUND('',#148310,.F.); +#148310 = EDGE_LOOP('',(#148311,#148322,#148330,#148338,#148346,#148354) + ); +#148311 = ORIENTED_EDGE('',*,*,#148312,.T.); +#148312 = EDGE_CURVE('',#148313,#148315,#148317,.T.); +#148313 = VERTEX_POINT('',#148314); +#148314 = CARTESIAN_POINT('',(95.860748,-110.784772,1.585)); +#148315 = VERTEX_POINT('',#148316); +#148316 = CARTESIAN_POINT('',(95.591599,-110.784772,1.585)); +#148317 = CIRCLE('',#148318,0.239283669194); +#148318 = AXIS2_PLACEMENT_3D('',#148319,#148320,#148321); +#148319 = CARTESIAN_POINT('',(95.7261735,-110.9826264371,1.585)); +#148320 = DIRECTION('',(0.,0.,1.)); +#148321 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#148322 = ORIENTED_EDGE('',*,*,#148323,.T.); +#148323 = EDGE_CURVE('',#148315,#148324,#148326,.T.); +#148324 = VERTEX_POINT('',#148325); +#148325 = CARTESIAN_POINT('',(95.563079,-110.841814,1.585)); +#148326 = LINE('',#148327,#148328); +#148327 = CARTESIAN_POINT('',(95.591599,-110.784772,1.585)); +#148328 = VECTOR('',#148329,1.); +#148329 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#148330 = ORIENTED_EDGE('',*,*,#148331,.T.); +#148331 = EDGE_CURVE('',#148324,#148332,#148334,.T.); +#148332 = VERTEX_POINT('',#148333); +#148333 = CARTESIAN_POINT('',(95.563079,-110.923099,1.585)); +#148334 = LINE('',#148335,#148336); +#148335 = CARTESIAN_POINT('',(95.563079,-110.841814,1.585)); +#148336 = VECTOR('',#148337,1.); +#148337 = DIRECTION('',(0.,-1.,0.)); +#148338 = ORIENTED_EDGE('',*,*,#148339,.T.); +#148339 = EDGE_CURVE('',#148332,#148340,#148342,.T.); +#148340 = VERTEX_POINT('',#148341); +#148341 = CARTESIAN_POINT('',(95.889269,-110.857862,1.585)); +#148342 = LINE('',#148343,#148344); +#148343 = CARTESIAN_POINT('',(95.563079,-110.923099,1.585)); +#148344 = VECTOR('',#148345,1.); +#148345 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#148346 = ORIENTED_EDGE('',*,*,#148347,.T.); +#148347 = EDGE_CURVE('',#148340,#148348,#148350,.T.); +#148348 = VERTEX_POINT('',#148349); +#148349 = CARTESIAN_POINT('',(95.889269,-110.841814,1.585)); +#148350 = LINE('',#148351,#148352); +#148351 = CARTESIAN_POINT('',(95.889269,-110.857862,1.585)); +#148352 = VECTOR('',#148353,1.); +#148353 = DIRECTION('',(0.,1.,0.)); +#148354 = ORIENTED_EDGE('',*,*,#148355,.T.); +#148355 = EDGE_CURVE('',#148348,#148313,#148356,.T.); +#148356 = LINE('',#148357,#148358); +#148357 = CARTESIAN_POINT('',(95.889269,-110.841814,1.585)); +#148358 = VECTOR('',#148359,1.); +#148359 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#148360 = PLANE('',#148361); +#148361 = AXIS2_PLACEMENT_3D('',#148362,#148363,#148364); +#148362 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148363 = DIRECTION('',(0.,0.,1.)); +#148364 = DIRECTION('',(1.,0.,-0.)); +#148365 = SHELL_BASED_SURFACE_MODEL('',(#148366)); +#148366 = OPEN_SHELL('',(#148367)); +#148367 = ADVANCED_FACE('',(#148368,#148470),#148538,.T.); +#148368 = FACE_BOUND('',#148369,.F.); +#148369 = EDGE_LOOP('',(#148370,#148381,#148389,#148398,#148406,#148414, + #148423,#148431,#148440,#148448,#148456,#148464)); +#148370 = ORIENTED_EDGE('',*,*,#148371,.T.); +#148371 = EDGE_CURVE('',#148372,#148374,#148376,.T.); +#148372 = VERTEX_POINT('',#148373); +#148373 = CARTESIAN_POINT('',(96.779744,-110.285559,1.585)); +#148374 = VERTEX_POINT('',#148375); +#148375 = CARTESIAN_POINT('',(96.896412,-110.347919,1.585)); +#148376 = CIRCLE('',#148377,7.500000000004E-02); +#148377 = AXIS2_PLACEMENT_3D('',#148378,#148379,#148380); +#148378 = CARTESIAN_POINT('',(96.821412,-110.3479190655,1.585)); +#148379 = DIRECTION('',(0.,0.,-1.)); +#148380 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#148381 = ORIENTED_EDGE('',*,*,#148382,.T.); +#148382 = EDGE_CURVE('',#148374,#148383,#148385,.T.); +#148383 = VERTEX_POINT('',#148384); +#148384 = CARTESIAN_POINT('',(96.894971,-111.362551,1.585)); +#148385 = LINE('',#148386,#148387); +#148386 = CARTESIAN_POINT('',(96.896412,-110.347919,1.585)); +#148387 = VECTOR('',#148388,1.); +#148388 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#148389 = ORIENTED_EDGE('',*,*,#148390,.T.); +#148390 = EDGE_CURVE('',#148383,#148391,#148393,.T.); +#148391 = VERTEX_POINT('',#148392); +#148392 = CARTESIAN_POINT('',(96.776215,-111.40675,1.585)); +#148393 = CIRCLE('',#148394,7.424656092701E-02); +#148394 = AXIS2_PLACEMENT_3D('',#148395,#148396,#148397); +#148395 = CARTESIAN_POINT('',(96.82209085331,-111.3483722825,1.585)); +#148396 = DIRECTION('',(-0.,0.,-1.)); +#148397 = DIRECTION('',(0.981596262232,-0.190968002485,-0.)); +#148398 = ORIENTED_EDGE('',*,*,#148399,.T.); +#148399 = EDGE_CURVE('',#148391,#148400,#148402,.T.); +#148400 = VERTEX_POINT('',#148401); +#148401 = CARTESIAN_POINT('',(96.740806,-111.421478,1.585)); +#148402 = LINE('',#148403,#148404); +#148403 = CARTESIAN_POINT('',(96.776215,-111.40675,1.585)); +#148404 = VECTOR('',#148405,1.); +#148405 = DIRECTION('',(-0.923315130307,-0.384043187866,0.)); +#148406 = ORIENTED_EDGE('',*,*,#148407,.T.); +#148407 = EDGE_CURVE('',#148400,#148408,#148410,.T.); +#148408 = VERTEX_POINT('',#148409); +#148409 = CARTESIAN_POINT('',(96.515888,-111.420256,1.585)); +#148410 = LINE('',#148411,#148412); +#148411 = CARTESIAN_POINT('',(96.740806,-111.421478,1.585)); +#148412 = VECTOR('',#148413,1.); +#148413 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#148414 = ORIENTED_EDGE('',*,*,#148415,.T.); +#148415 = EDGE_CURVE('',#148408,#148416,#148418,.T.); +#148416 = VERTEX_POINT('',#148417); +#148417 = CARTESIAN_POINT('',(96.271663,-111.172074,1.585)); +#148418 = CIRCLE('',#148419,0.348628446662); +#148419 = AXIS2_PLACEMENT_3D('',#148420,#148421,#148422); +#148420 = CARTESIAN_POINT('',(96.609063613227,-111.0843094284,1.585)); +#148421 = DIRECTION('',(0.,0.,-1.)); +#148422 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#148423 = ORIENTED_EDGE('',*,*,#148424,.T.); +#148424 = EDGE_CURVE('',#148416,#148425,#148427,.T.); +#148425 = VERTEX_POINT('',#148426); +#148426 = CARTESIAN_POINT('',(96.272885,-110.851919,1.585)); +#148427 = LINE('',#148428,#148429); +#148428 = CARTESIAN_POINT('',(96.271663,-111.172074,1.585)); +#148429 = VECTOR('',#148430,1.); +#148430 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#148431 = ORIENTED_EDGE('',*,*,#148432,.T.); +#148432 = EDGE_CURVE('',#148425,#148433,#148435,.T.); +#148433 = VERTEX_POINT('',#148434); +#148434 = CARTESIAN_POINT('',(96.521066,-110.607693,1.585)); +#148435 = CIRCLE('',#148436,0.3486213829); +#148436 = AXIS2_PLACEMENT_3D('',#148437,#148438,#148439); +#148437 = CARTESIAN_POINT('',(96.608826229516,-110.9450874438,1.585)); +#148438 = DIRECTION('',(0.,0.,-1.)); +#148439 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#148440 = ORIENTED_EDGE('',*,*,#148441,.T.); +#148441 = EDGE_CURVE('',#148433,#148442,#148444,.T.); +#148442 = VERTEX_POINT('',#148443); +#148443 = CARTESIAN_POINT('',(96.746412,-110.609079,1.585)); +#148444 = LINE('',#148445,#148446); +#148445 = CARTESIAN_POINT('',(96.521066,-110.607693,1.585)); +#148446 = VECTOR('',#148447,1.); +#148447 = DIRECTION('',(0.999981085954,-6.150425501802E-03,0.)); +#148448 = ORIENTED_EDGE('',*,*,#148449,.T.); +#148449 = EDGE_CURVE('',#148442,#148450,#148452,.T.); +#148450 = VERTEX_POINT('',#148451); +#148451 = CARTESIAN_POINT('',(96.747853,-110.333287,1.585)); +#148452 = LINE('',#148453,#148454); +#148453 = CARTESIAN_POINT('',(96.746412,-110.609079,1.585)); +#148454 = VECTOR('',#148455,1.); +#148455 = DIRECTION('',(5.22488081838E-03,0.999986350217,0.)); +#148456 = ORIENTED_EDGE('',*,*,#148457,.T.); +#148457 = EDGE_CURVE('',#148450,#148458,#148460,.T.); +#148458 = VERTEX_POINT('',#148459); +#148459 = CARTESIAN_POINT('',(96.759052,-110.306251,1.585)); +#148460 = LINE('',#148461,#148462); +#148461 = CARTESIAN_POINT('',(96.747853,-110.333287,1.585)); +#148462 = VECTOR('',#148463,1.); +#148463 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#148464 = ORIENTED_EDGE('',*,*,#148465,.T.); +#148465 = EDGE_CURVE('',#148458,#148372,#148466,.T.); +#148466 = LINE('',#148467,#148468); +#148467 = CARTESIAN_POINT('',(96.759052,-110.306251,1.585)); +#148468 = VECTOR('',#148469,1.); +#148469 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#148470 = FACE_BOUND('',#148471,.F.); +#148471 = EDGE_LOOP('',(#148472,#148482,#148490,#148499,#148507,#148516, + #148524,#148532)); +#148472 = ORIENTED_EDGE('',*,*,#148473,.T.); +#148473 = EDGE_CURVE('',#148474,#148476,#148478,.T.); +#148474 = VERTEX_POINT('',#148475); +#148475 = CARTESIAN_POINT('',(96.746412,-110.775223,1.585)); +#148476 = VERTEX_POINT('',#148477); +#148477 = CARTESIAN_POINT('',(96.708469,-110.756252,1.585)); +#148478 = LINE('',#148479,#148480); +#148479 = CARTESIAN_POINT('',(96.746412,-110.775223,1.585)); +#148480 = VECTOR('',#148481,1.); +#148481 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#148482 = ORIENTED_EDGE('',*,*,#148483,.T.); +#148483 = EDGE_CURVE('',#148476,#148484,#148486,.T.); +#148484 = VERTEX_POINT('',#148485); +#148485 = CARTESIAN_POINT('',(96.553403,-110.756252,1.585)); +#148486 = LINE('',#148487,#148488); +#148487 = CARTESIAN_POINT('',(96.708469,-110.756252,1.585)); +#148488 = VECTOR('',#148489,1.); +#148489 = DIRECTION('',(-1.,0.,0.)); +#148490 = ORIENTED_EDGE('',*,*,#148491,.T.); +#148491 = EDGE_CURVE('',#148484,#148492,#148494,.T.); +#148492 = VERTEX_POINT('',#148493); +#148493 = CARTESIAN_POINT('',(96.420222,-110.889433,1.585)); +#148494 = CIRCLE('',#148495,0.18686440374); +#148495 = AXIS2_PLACEMENT_3D('',#148496,#148497,#148498); +#148496 = CARTESIAN_POINT('',(96.600939,-110.936969,1.585)); +#148497 = DIRECTION('',(0.,0.,1.)); +#148498 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#148499 = ORIENTED_EDGE('',*,*,#148500,.T.); +#148500 = EDGE_CURVE('',#148492,#148501,#148503,.T.); +#148501 = VERTEX_POINT('',#148502); +#148502 = CARTESIAN_POINT('',(96.420222,-111.139737,1.585)); +#148503 = LINE('',#148504,#148505); +#148504 = CARTESIAN_POINT('',(96.420222,-110.889433,1.585)); +#148505 = VECTOR('',#148506,1.); +#148506 = DIRECTION('',(0.,-1.,0.)); +#148507 = ORIENTED_EDGE('',*,*,#148508,.T.); +#148508 = EDGE_CURVE('',#148501,#148509,#148511,.T.); +#148509 = VERTEX_POINT('',#148510); +#148510 = CARTESIAN_POINT('',(96.553403,-111.272919,1.585)); +#148511 = CIRCLE('',#148512,0.186867373533); +#148512 = AXIS2_PLACEMENT_3D('',#148513,#148514,#148515); +#148513 = CARTESIAN_POINT('',(96.600941713884,-111.092199643,1.585)); +#148514 = DIRECTION('',(0.,0.,1.)); +#148515 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#148516 = ORIENTED_EDGE('',*,*,#148517,.T.); +#148517 = EDGE_CURVE('',#148509,#148518,#148520,.T.); +#148518 = VERTEX_POINT('',#148519); +#148519 = CARTESIAN_POINT('',(96.708469,-111.272919,1.585)); +#148520 = LINE('',#148521,#148522); +#148521 = CARTESIAN_POINT('',(96.553403,-111.272919,1.585)); +#148522 = VECTOR('',#148523,1.); +#148523 = DIRECTION('',(1.,0.,0.)); +#148524 = ORIENTED_EDGE('',*,*,#148525,.T.); +#148525 = EDGE_CURVE('',#148518,#148526,#148528,.T.); +#148526 = VERTEX_POINT('',#148527); +#148527 = CARTESIAN_POINT('',(96.746412,-111.253947,1.585)); +#148528 = LINE('',#148529,#148530); +#148529 = CARTESIAN_POINT('',(96.708469,-111.272919,1.585)); +#148530 = VECTOR('',#148531,1.); +#148531 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#148532 = ORIENTED_EDGE('',*,*,#148533,.T.); +#148533 = EDGE_CURVE('',#148526,#148474,#148534,.T.); +#148534 = LINE('',#148535,#148536); +#148535 = CARTESIAN_POINT('',(96.746412,-111.253947,1.585)); +#148536 = VECTOR('',#148537,1.); +#148537 = DIRECTION('',(0.,1.,0.)); +#148538 = PLANE('',#148539); +#148539 = AXIS2_PLACEMENT_3D('',#148540,#148541,#148542); +#148540 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148541 = DIRECTION('',(0.,0.,1.)); +#148542 = DIRECTION('',(1.,0.,-0.)); +#148543 = SHELL_BASED_SURFACE_MODEL('',(#148544)); +#148544 = OPEN_SHELL('',(#148545)); +#148545 = ADVANCED_FACE('',(#148546,#148689),#148759,.T.); +#148546 = FACE_BOUND('',#148547,.F.); +#148547 = EDGE_LOOP('',(#148548,#148559,#148567,#148575,#148584,#148592, + #148600,#148608,#148616,#148624,#148632,#148640,#148649,#148657, + #148666,#148674,#148683)); +#148548 = ORIENTED_EDGE('',*,*,#148549,.T.); +#148549 = EDGE_CURVE('',#148550,#148552,#148554,.T.); +#148550 = VERTEX_POINT('',#148551); +#148551 = CARTESIAN_POINT('',(98.883175,-110.7583,1.585)); +#148552 = VERTEX_POINT('',#148553); +#148553 = CARTESIAN_POINT('',(99.112871,-110.328456,1.585)); +#148554 = CIRCLE('',#148555,0.610092147705); +#148555 = AXIS2_PLACEMENT_3D('',#148556,#148557,#148558); +#148556 = CARTESIAN_POINT('',(99.491321740242,-110.8069823481,1.585)); +#148557 = DIRECTION('',(0.,0.,-1.)); +#148558 = DIRECTION('',(-0.99681128913,7.97950741736E-02,0.)); +#148559 = ORIENTED_EDGE('',*,*,#148560,.T.); +#148560 = EDGE_CURVE('',#148552,#148561,#148563,.T.); +#148561 = VERTEX_POINT('',#148562); +#148562 = CARTESIAN_POINT('',(99.227018,-110.27436,1.585)); +#148563 = LINE('',#148564,#148565); +#148564 = CARTESIAN_POINT('',(99.112871,-110.328456,1.585)); +#148565 = VECTOR('',#148566,1.); +#148566 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#148567 = ORIENTED_EDGE('',*,*,#148568,.T.); +#148568 = EDGE_CURVE('',#148561,#148569,#148571,.T.); +#148569 = VERTEX_POINT('',#148570); +#148570 = CARTESIAN_POINT('',(99.446758,-110.27436,1.585)); +#148571 = LINE('',#148572,#148573); +#148572 = CARTESIAN_POINT('',(99.227018,-110.27436,1.585)); +#148573 = VECTOR('',#148574,1.); +#148574 = DIRECTION('',(1.,0.,0.)); +#148575 = ORIENTED_EDGE('',*,*,#148576,.T.); +#148576 = EDGE_CURVE('',#148569,#148577,#148579,.T.); +#148577 = VERTEX_POINT('',#148578); +#148578 = CARTESIAN_POINT('',(99.432126,-110.422919,1.585)); +#148579 = CIRCLE('',#148580,7.500006711464E-02); +#148580 = AXIS2_PLACEMENT_3D('',#148581,#148582,#148583); +#148581 = CARTESIAN_POINT('',(99.432126067115,-110.3479189328,1.585)); +#148582 = DIRECTION('',(0.,0.,-1.)); +#148583 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#148584 = ORIENTED_EDGE('',*,*,#148585,.T.); +#148585 = EDGE_CURVE('',#148577,#148586,#148588,.T.); +#148586 = VERTEX_POINT('',#148587); +#148587 = CARTESIAN_POINT('',(99.259355,-110.422919,1.585)); +#148588 = LINE('',#148589,#148590); +#148589 = CARTESIAN_POINT('',(99.432126,-110.422919,1.585)); +#148590 = VECTOR('',#148591,1.); +#148591 = DIRECTION('',(-1.,0.,0.)); +#148592 = ORIENTED_EDGE('',*,*,#148593,.T.); +#148593 = EDGE_CURVE('',#148586,#148594,#148596,.T.); +#148594 = VERTEX_POINT('',#148595); +#148595 = CARTESIAN_POINT('',(99.190839,-110.457177,1.585)); +#148596 = LINE('',#148597,#148598); +#148597 = CARTESIAN_POINT('',(99.259355,-110.422919,1.585)); +#148598 = VECTOR('',#148599,1.); +#148599 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#148600 = ORIENTED_EDGE('',*,*,#148601,.T.); +#148601 = EDGE_CURVE('',#148594,#148602,#148604,.T.); +#148602 = VERTEX_POINT('',#148603); +#148603 = CARTESIAN_POINT('',(99.157077,-110.490938,1.585)); +#148604 = LINE('',#148605,#148606); +#148605 = CARTESIAN_POINT('',(99.190839,-110.457177,1.585)); +#148606 = VECTOR('',#148607,1.); +#148607 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#148608 = ORIENTED_EDGE('',*,*,#148609,.T.); +#148609 = EDGE_CURVE('',#148602,#148610,#148612,.T.); +#148610 = VERTEX_POINT('',#148611); +#148611 = CARTESIAN_POINT('',(99.073165,-110.616807,1.585)); +#148612 = LINE('',#148613,#148614); +#148613 = CARTESIAN_POINT('',(99.157077,-110.490938,1.585)); +#148614 = VECTOR('',#148615,1.); +#148615 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#148616 = ORIENTED_EDGE('',*,*,#148617,.T.); +#148617 = EDGE_CURVE('',#148610,#148618,#148620,.T.); +#148618 = VERTEX_POINT('',#148619); +#148619 = CARTESIAN_POINT('',(99.054641,-110.690904,1.585)); +#148620 = LINE('',#148621,#148622); +#148621 = CARTESIAN_POINT('',(99.073165,-110.616807,1.585)); +#148622 = VECTOR('',#148623,1.); +#148623 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#148624 = ORIENTED_EDGE('',*,*,#148625,.T.); +#148625 = EDGE_CURVE('',#148618,#148626,#148628,.T.); +#148626 = VERTEX_POINT('',#148627); +#148627 = CARTESIAN_POINT('',(99.13178,-110.655312,1.585)); +#148628 = LINE('',#148629,#148630); +#148629 = CARTESIAN_POINT('',(99.054641,-110.690904,1.585)); +#148630 = VECTOR('',#148631,1.); +#148631 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#148632 = ORIENTED_EDGE('',*,*,#148633,.T.); +#148633 = EDGE_CURVE('',#148626,#148634,#148636,.T.); +#148634 = VERTEX_POINT('',#148635); +#148635 = CARTESIAN_POINT('',(99.356697,-110.656534,1.585)); +#148636 = LINE('',#148637,#148638); +#148637 = CARTESIAN_POINT('',(99.13178,-110.655312,1.585)); +#148638 = VECTOR('',#148639,1.); +#148639 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#148640 = ORIENTED_EDGE('',*,*,#148641,.T.); +#148641 = EDGE_CURVE('',#148634,#148642,#148644,.T.); +#148642 = VERTEX_POINT('',#148643); +#148643 = CARTESIAN_POINT('',(99.600923,-110.904715,1.585)); +#148644 = CIRCLE('',#148645,0.348625649748); +#148645 = AXIS2_PLACEMENT_3D('',#148646,#148647,#148648); +#148646 = CARTESIAN_POINT('',(99.263525045865,-110.9924786838,1.585)); +#148647 = DIRECTION('',(0.,0.,-1.)); +#148648 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#148649 = ORIENTED_EDGE('',*,*,#148650,.T.); +#148650 = EDGE_CURVE('',#148642,#148651,#148653,.T.); +#148651 = VERTEX_POINT('',#148652); +#148652 = CARTESIAN_POINT('',(99.599701,-111.177252,1.585)); +#148653 = LINE('',#148654,#148655); +#148654 = CARTESIAN_POINT('',(99.600923,-110.904715,1.585)); +#148655 = VECTOR('',#148656,1.); +#148656 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#148657 = ORIENTED_EDGE('',*,*,#148658,.T.); +#148658 = EDGE_CURVE('',#148651,#148659,#148661,.T.); +#148659 = VERTEX_POINT('',#148660); +#148660 = CARTESIAN_POINT('',(99.35152,-111.421478,1.585)); +#148661 = CIRCLE('',#148662,0.348635327447); +#148662 = AXIS2_PLACEMENT_3D('',#148663,#148664,#148665); +#148663 = CARTESIAN_POINT('',(99.263748481291,-111.0840720841,1.585)); +#148664 = DIRECTION('',(0.,0.,-1.)); +#148665 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#148666 = ORIENTED_EDGE('',*,*,#148667,.T.); +#148667 = EDGE_CURVE('',#148659,#148668,#148670,.T.); +#148668 = VERTEX_POINT('',#148669); +#148669 = CARTESIAN_POINT('',(99.126602,-111.420256,1.585)); +#148670 = LINE('',#148671,#148672); +#148671 = CARTESIAN_POINT('',(99.35152,-111.421478,1.585)); +#148672 = VECTOR('',#148673,1.); +#148673 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#148674 = ORIENTED_EDGE('',*,*,#148675,.T.); +#148675 = EDGE_CURVE('',#148668,#148676,#148678,.T.); +#148676 = VERTEX_POINT('',#148677); +#148677 = CARTESIAN_POINT('',(98.882377,-111.172074,1.585)); +#148678 = CIRCLE('',#148679,0.348628446662); +#148679 = AXIS2_PLACEMENT_3D('',#148680,#148681,#148682); +#148680 = CARTESIAN_POINT('',(99.219777613227,-111.0843094284,1.585)); +#148681 = DIRECTION('',(0.,0.,-1.)); +#148682 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#148683 = ORIENTED_EDGE('',*,*,#148684,.T.); +#148684 = EDGE_CURVE('',#148676,#148550,#148685,.T.); +#148685 = LINE('',#148686,#148687); +#148686 = CARTESIAN_POINT('',(98.882377,-111.172074,1.585)); +#148687 = VECTOR('',#148688,1.); +#148688 = DIRECTION('',(1.92858544986E-03,0.999998140277,0.)); +#148689 = FACE_BOUND('',#148690,.F.); +#148690 = EDGE_LOOP('',(#148691,#148702,#148710,#148719,#148727,#148736, + #148744,#148753)); +#148691 = ORIENTED_EDGE('',*,*,#148692,.T.); +#148692 = EDGE_CURVE('',#148693,#148695,#148697,.T.); +#148693 = VERTEX_POINT('',#148694); +#148694 = CARTESIAN_POINT('',(99.387699,-110.838129,1.585)); +#148695 = VERTEX_POINT('',#148696); +#148696 = CARTESIAN_POINT('',(99.095601,-110.838129,1.585)); +#148697 = CIRCLE('',#148698,0.252889603602); +#148698 = AXIS2_PLACEMENT_3D('',#148699,#148700,#148701); +#148699 = CARTESIAN_POINT('',(99.24165,-111.044582,1.585)); +#148700 = DIRECTION('',(0.,0.,1.)); +#148701 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#148702 = ORIENTED_EDGE('',*,*,#148703,.T.); +#148703 = EDGE_CURVE('',#148695,#148704,#148706,.T.); +#148704 = VERTEX_POINT('',#148705); +#148705 = CARTESIAN_POINT('',(99.065194,-110.868536,1.585)); +#148706 = LINE('',#148707,#148708); +#148707 = CARTESIAN_POINT('',(99.095601,-110.838129,1.585)); +#148708 = VECTOR('',#148709,1.); +#148709 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#148710 = ORIENTED_EDGE('',*,*,#148711,.T.); +#148711 = EDGE_CURVE('',#148704,#148712,#148714,.T.); +#148712 = VERTEX_POINT('',#148713); +#148713 = CARTESIAN_POINT('',(99.065194,-111.208253,1.585)); +#148714 = CIRCLE('',#148715,0.305621483548); +#148715 = AXIS2_PLACEMENT_3D('',#148716,#148717,#148718); +#148716 = CARTESIAN_POINT('',(99.319266,-111.0383945,1.585)); +#148717 = DIRECTION('',(0.,0.,1.)); +#148718 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#148719 = ORIENTED_EDGE('',*,*,#148720,.T.); +#148720 = EDGE_CURVE('',#148712,#148721,#148723,.T.); +#148721 = VERTEX_POINT('',#148722); +#148722 = CARTESIAN_POINT('',(99.095601,-111.238661,1.585)); +#148723 = LINE('',#148724,#148725); +#148724 = CARTESIAN_POINT('',(99.065194,-111.208253,1.585)); +#148725 = VECTOR('',#148726,1.); +#148726 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#148727 = ORIENTED_EDGE('',*,*,#148728,.T.); +#148728 = EDGE_CURVE('',#148721,#148729,#148731,.T.); +#148729 = VERTEX_POINT('',#148730); +#148730 = CARTESIAN_POINT('',(99.387698,-111.238661,1.585)); +#148731 = CIRCLE('',#148732,0.252888498466); +#148732 = AXIS2_PLACEMENT_3D('',#148733,#148734,#148735); +#148733 = CARTESIAN_POINT('',(99.2416495,-111.032209,1.585)); +#148734 = DIRECTION('',(0.,0.,1.)); +#148735 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#148736 = ORIENTED_EDGE('',*,*,#148737,.T.); +#148737 = EDGE_CURVE('',#148729,#148738,#148740,.T.); +#148738 = VERTEX_POINT('',#148739); +#148739 = CARTESIAN_POINT('',(99.418105,-111.208253,1.585)); +#148740 = LINE('',#148741,#148742); +#148741 = CARTESIAN_POINT('',(99.387698,-111.238661,1.585)); +#148742 = VECTOR('',#148743,1.); +#148743 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#148744 = ORIENTED_EDGE('',*,*,#148745,.T.); +#148745 = EDGE_CURVE('',#148738,#148746,#148748,.T.); +#148746 = VERTEX_POINT('',#148747); +#148747 = CARTESIAN_POINT('',(99.418106,-110.868536,1.585)); +#148748 = CIRCLE('',#148749,0.305616146029); +#148749 = AXIS2_PLACEMENT_3D('',#148750,#148751,#148752); +#148750 = CARTESIAN_POINT('',(99.164039920493,-111.0383937521,1.585)); +#148751 = DIRECTION('',(0.,-0.,1.)); +#148752 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#148753 = ORIENTED_EDGE('',*,*,#148754,.T.); +#148754 = EDGE_CURVE('',#148746,#148693,#148755,.T.); +#148755 = LINE('',#148756,#148757); +#148756 = CARTESIAN_POINT('',(99.418106,-110.868536,1.585)); +#148757 = VECTOR('',#148758,1.); +#148758 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#148759 = PLANE('',#148760); +#148760 = AXIS2_PLACEMENT_3D('',#148761,#148762,#148763); +#148761 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148762 = DIRECTION('',(0.,0.,1.)); +#148763 = DIRECTION('',(1.,0.,-0.)); +#148764 = SHELL_BASED_SURFACE_MODEL('',(#148765)); +#148765 = OPEN_SHELL('',(#148766)); +#148766 = ADVANCED_FACE('',(#148767,#148917,#148987),#149072,.T.); +#148767 = FACE_BOUND('',#148768,.F.); +#148768 = EDGE_LOOP('',(#148769,#148780,#148788,#148796,#148804,#148812, + #148820,#148828,#148837,#148845,#148854,#148862,#148871,#148879, + #148887,#148895,#148903,#148911)); +#148769 = ORIENTED_EDGE('',*,*,#148770,.T.); +#148770 = EDGE_CURVE('',#148771,#148773,#148775,.T.); +#148771 = VERTEX_POINT('',#148772); +#148772 = CARTESIAN_POINT('',(107.186333,-110.33242,1.585)); +#148773 = VERTEX_POINT('',#148774); +#148774 = CARTESIAN_POINT('',(107.654409,-110.337786,1.585)); +#148775 = CIRCLE('',#148776,0.397581403297); +#148776 = AXIS2_PLACEMENT_3D('',#148777,#148778,#148779); +#148777 = CARTESIAN_POINT('',(107.41668687062,-110.6564694816,1.585)); +#148778 = DIRECTION('',(0.,0.,-1.)); +#148779 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#148780 = ORIENTED_EDGE('',*,*,#148781,.T.); +#148781 = EDGE_CURVE('',#148773,#148782,#148784,.T.); +#148782 = VERTEX_POINT('',#148783); +#148783 = CARTESIAN_POINT('',(107.717862,-110.403316,1.585)); +#148784 = LINE('',#148785,#148786); +#148785 = CARTESIAN_POINT('',(107.654409,-110.337786,1.585)); +#148786 = VECTOR('',#148787,1.); +#148787 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#148788 = ORIENTED_EDGE('',*,*,#148789,.T.); +#148789 = EDGE_CURVE('',#148782,#148790,#148792,.T.); +#148790 = VERTEX_POINT('',#148791); +#148791 = CARTESIAN_POINT('',(107.775923,-110.523763,1.585)); +#148792 = LINE('',#148793,#148794); +#148793 = CARTESIAN_POINT('',(107.717862,-110.403316,1.585)); +#148794 = VECTOR('',#148795,1.); +#148795 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#148796 = ORIENTED_EDGE('',*,*,#148797,.T.); +#148797 = EDGE_CURVE('',#148790,#148798,#148800,.T.); +#148798 = VERTEX_POINT('',#148799); +#148799 = CARTESIAN_POINT('',(107.774701,-110.605824,1.585)); +#148800 = LINE('',#148801,#148802); +#148801 = CARTESIAN_POINT('',(107.775923,-110.523763,1.585)); +#148802 = VECTOR('',#148803,1.); +#148803 = DIRECTION('',(-1.488971047975E-02,-0.999889142116,0.)); +#148804 = ORIENTED_EDGE('',*,*,#148805,.T.); +#148805 = EDGE_CURVE('',#148798,#148806,#148808,.T.); +#148806 = VERTEX_POINT('',#148807); +#148807 = CARTESIAN_POINT('',(107.712496,-110.728535,1.585)); +#148808 = LINE('',#148809,#148810); +#148809 = CARTESIAN_POINT('',(107.774701,-110.605824,1.585)); +#148810 = VECTOR('',#148811,1.); +#148811 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#148812 = ORIENTED_EDGE('',*,*,#148813,.T.); +#148813 = EDGE_CURVE('',#148806,#148814,#148816,.T.); +#148814 = VERTEX_POINT('',#148815); +#148815 = CARTESIAN_POINT('',(107.665573,-110.77649,1.585)); +#148816 = LINE('',#148817,#148818); +#148817 = CARTESIAN_POINT('',(107.712496,-110.728535,1.585)); +#148818 = VECTOR('',#148819,1.); +#148819 = DIRECTION('',(-0.699374120429,-0.714755790235,0.)); +#148820 = ORIENTED_EDGE('',*,*,#148821,.T.); +#148821 = EDGE_CURVE('',#148814,#148822,#148824,.T.); +#148822 = VERTEX_POINT('',#148823); +#148823 = CARTESIAN_POINT('',(107.721827,-110.838187,1.585)); +#148824 = LINE('',#148825,#148826); +#148825 = CARTESIAN_POINT('',(107.665573,-110.77649,1.585)); +#148826 = VECTOR('',#148827,1.); +#148827 = DIRECTION('',(0.673759436039,-0.738950757729,0.)); +#148828 = ORIENTED_EDGE('',*,*,#148829,.T.); +#148829 = EDGE_CURVE('',#148822,#148830,#148832,.T.); +#148830 = VERTEX_POINT('',#148831); +#148831 = CARTESIAN_POINT('',(107.712496,-111.299963,1.585)); +#148832 = CIRCLE('',#148833,0.395774657874); +#148833 = AXIS2_PLACEMENT_3D('',#148834,#148835,#148836); +#148834 = CARTESIAN_POINT('',(107.39581374421,-111.0625816007,1.585)); +#148835 = DIRECTION('',(0.,0.,-1.)); +#148836 = DIRECTION('',(0.823734540094,0.566975667428,0.)); +#148837 = ORIENTED_EDGE('',*,*,#148838,.T.); +#148838 = EDGE_CURVE('',#148830,#148839,#148841,.T.); +#148839 = VERTEX_POINT('',#148840); +#148840 = CARTESIAN_POINT('',(107.646966,-111.363417,1.585)); +#148841 = LINE('',#148842,#148843); +#148842 = CARTESIAN_POINT('',(107.712496,-111.299963,1.585)); +#148843 = VECTOR('',#148844,1.); +#148844 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#148845 = ORIENTED_EDGE('',*,*,#148846,.T.); +#148846 = EDGE_CURVE('',#148839,#148847,#148849,.T.); +#148847 = VERTEX_POINT('',#148848); +#148848 = CARTESIAN_POINT('',(107.178889,-111.35805,1.585)); +#148849 = CIRCLE('',#148850,0.397464151365); +#148850 = AXIS2_PLACEMENT_3D('',#148851,#148852,#148853); +#148851 = CARTESIAN_POINT('',(107.41661064058,-111.0395124461,1.585)); +#148852 = DIRECTION('',(-0.,0.,-1.)); +#148853 = DIRECTION('',(0.579562606145,-0.814927717996,-0.)); +#148854 = ORIENTED_EDGE('',*,*,#148855,.T.); +#148855 = EDGE_CURVE('',#148847,#148856,#148858,.T.); +#148856 = VERTEX_POINT('',#148857); +#148857 = CARTESIAN_POINT('',(107.115436,-111.292517,1.585)); +#148858 = LINE('',#148859,#148860); +#148859 = CARTESIAN_POINT('',(107.178889,-111.35805,1.585)); +#148860 = VECTOR('',#148861,1.); +#148861 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#148862 = ORIENTED_EDGE('',*,*,#148863,.T.); +#148863 = EDGE_CURVE('',#148856,#148864,#148866,.T.); +#148864 = VERTEX_POINT('',#148865); +#148865 = CARTESIAN_POINT('',(107.120803,-110.824444,1.585)); +#148866 = CIRCLE('',#148867,0.397465551155); +#148867 = AXIS2_PLACEMENT_3D('',#148868,#148869,#148870); +#148868 = CARTESIAN_POINT('',(107.43934374227,-111.0621637086,1.585)); +#148869 = DIRECTION('',(0.,0.,-1.)); +#148870 = DIRECTION('',(-0.814932869863,-0.579555361995,-0.)); +#148871 = ORIENTED_EDGE('',*,*,#148872,.T.); +#148872 = EDGE_CURVE('',#148864,#148873,#148875,.T.); +#148873 = VERTEX_POINT('',#148874); +#148874 = CARTESIAN_POINT('',(107.167727,-110.77649,1.585)); +#148875 = LINE('',#148876,#148877); +#148876 = CARTESIAN_POINT('',(107.120803,-110.824444,1.585)); +#148877 = VECTOR('',#148878,1.); +#148878 = DIRECTION('',(0.699389185334,0.714741049218,0.)); +#148879 = ORIENTED_EDGE('',*,*,#148880,.T.); +#148880 = EDGE_CURVE('',#148873,#148881,#148883,.T.); +#148881 = VERTEX_POINT('',#148882); +#148882 = CARTESIAN_POINT('',(107.111473,-110.714793,1.585)); +#148883 = LINE('',#148884,#148885); +#148884 = CARTESIAN_POINT('',(107.167727,-110.77649,1.585)); +#148885 = VECTOR('',#148886,1.); +#148886 = DIRECTION('',(-0.673759436039,0.738950757729,0.)); +#148887 = ORIENTED_EDGE('',*,*,#148888,.T.); +#148888 = EDGE_CURVE('',#148881,#148889,#148891,.T.); +#148889 = VERTEX_POINT('',#148890); +#148890 = CARTESIAN_POINT('',(107.057377,-110.600646,1.585)); +#148891 = LINE('',#148892,#148893); +#148892 = CARTESIAN_POINT('',(107.111473,-110.714793,1.585)); +#148893 = VECTOR('',#148894,1.); +#148894 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#148895 = ORIENTED_EDGE('',*,*,#148896,.T.); +#148896 = EDGE_CURVE('',#148889,#148897,#148899,.T.); +#148897 = VERTEX_POINT('',#148898); +#148898 = CARTESIAN_POINT('',(107.058599,-110.518586,1.585)); +#148899 = LINE('',#148900,#148901); +#148900 = CARTESIAN_POINT('',(107.057377,-110.600646,1.585)); +#148901 = VECTOR('',#148902,1.); +#148902 = DIRECTION('',(1.488989188842E-02,0.999889139415,0.)); +#148903 = ORIENTED_EDGE('',*,*,#148904,.T.); +#148904 = EDGE_CURVE('',#148897,#148905,#148907,.T.); +#148905 = VERTEX_POINT('',#148906); +#148906 = CARTESIAN_POINT('',(107.120803,-110.395873,1.585)); +#148907 = LINE('',#148908,#148909); +#148908 = CARTESIAN_POINT('',(107.058599,-110.518586,1.585)); +#148909 = VECTOR('',#148910,1.); +#148910 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#148911 = ORIENTED_EDGE('',*,*,#148912,.T.); +#148912 = EDGE_CURVE('',#148905,#148771,#148913,.T.); +#148913 = LINE('',#148914,#148915); +#148914 = CARTESIAN_POINT('',(107.120803,-110.395873,1.585)); +#148915 = VECTOR('',#148916,1.); +#148916 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#148917 = FACE_BOUND('',#148918,.F.); +#148918 = EDGE_LOOP('',(#148919,#148930,#148938,#148947,#148955,#148964, + #148972,#148981)); +#148919 = ORIENTED_EDGE('',*,*,#148920,.T.); +#148920 = EDGE_CURVE('',#148921,#148923,#148925,.T.); +#148921 = VERTEX_POINT('',#148922); +#148922 = CARTESIAN_POINT('',(107.562699,-110.885748,1.585)); +#148923 = VERTEX_POINT('',#148924); +#148924 = CARTESIAN_POINT('',(107.270601,-110.885748,1.585)); +#148925 = CIRCLE('',#148926,0.252889603602); +#148926 = AXIS2_PLACEMENT_3D('',#148927,#148928,#148929); +#148927 = CARTESIAN_POINT('',(107.41665,-111.092201,1.585)); +#148928 = DIRECTION('',(0.,0.,1.)); +#148929 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#148930 = ORIENTED_EDGE('',*,*,#148931,.T.); +#148931 = EDGE_CURVE('',#148923,#148932,#148934,.T.); +#148932 = VERTEX_POINT('',#148933); +#148933 = CARTESIAN_POINT('',(107.240194,-110.916155,1.585)); +#148934 = LINE('',#148935,#148936); +#148935 = CARTESIAN_POINT('',(107.270601,-110.885748,1.585)); +#148936 = VECTOR('',#148937,1.); +#148937 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#148938 = ORIENTED_EDGE('',*,*,#148939,.T.); +#148939 = EDGE_CURVE('',#148932,#148940,#148942,.T.); +#148940 = VERTEX_POINT('',#148941); +#148941 = CARTESIAN_POINT('',(107.240194,-111.208253,1.585)); +#148942 = CIRCLE('',#148943,0.252889603602); +#148943 = AXIS2_PLACEMENT_3D('',#148944,#148945,#148946); +#148944 = CARTESIAN_POINT('',(107.446647,-111.062204,1.585)); +#148945 = DIRECTION('',(0.,0.,1.)); +#148946 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#148947 = ORIENTED_EDGE('',*,*,#148948,.T.); +#148948 = EDGE_CURVE('',#148940,#148949,#148951,.T.); +#148949 = VERTEX_POINT('',#148950); +#148950 = CARTESIAN_POINT('',(107.270601,-111.238661,1.585)); +#148951 = LINE('',#148952,#148953); +#148952 = CARTESIAN_POINT('',(107.240194,-111.208253,1.585)); +#148953 = VECTOR('',#148954,1.); +#148954 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#148955 = ORIENTED_EDGE('',*,*,#148956,.T.); +#148956 = EDGE_CURVE('',#148949,#148957,#148959,.T.); +#148957 = VERTEX_POINT('',#148958); +#148958 = CARTESIAN_POINT('',(107.562698,-111.238661,1.585)); +#148959 = CIRCLE('',#148960,0.252888498466); +#148960 = AXIS2_PLACEMENT_3D('',#148961,#148962,#148963); +#148961 = CARTESIAN_POINT('',(107.4166495,-111.032209,1.585)); +#148962 = DIRECTION('',(0.,0.,1.)); +#148963 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#148964 = ORIENTED_EDGE('',*,*,#148965,.T.); +#148965 = EDGE_CURVE('',#148957,#148966,#148968,.T.); +#148966 = VERTEX_POINT('',#148967); +#148967 = CARTESIAN_POINT('',(107.593105,-111.208253,1.585)); +#148968 = LINE('',#148969,#148970); +#148969 = CARTESIAN_POINT('',(107.562698,-111.238661,1.585)); +#148970 = VECTOR('',#148971,1.); +#148971 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#148972 = ORIENTED_EDGE('',*,*,#148973,.T.); +#148973 = EDGE_CURVE('',#148966,#148974,#148976,.T.); +#148974 = VERTEX_POINT('',#148975); +#148975 = CARTESIAN_POINT('',(107.593106,-110.916155,1.585)); +#148976 = CIRCLE('',#148977,0.252885429722); +#148977 = AXIS2_PLACEMENT_3D('',#148978,#148979,#148980); +#148978 = CARTESIAN_POINT('',(107.38665761271,-111.0622032932,1.585)); +#148979 = DIRECTION('',(0.,-0.,1.)); +#148980 = DIRECTION('',(0.816367267623,-0.577533102387,-0.)); +#148981 = ORIENTED_EDGE('',*,*,#148982,.T.); +#148982 = EDGE_CURVE('',#148974,#148921,#148983,.T.); +#148983 = LINE('',#148984,#148985); +#148984 = CARTESIAN_POINT('',(107.593106,-110.916155,1.585)); +#148985 = VECTOR('',#148986,1.); +#148986 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#148987 = FACE_BOUND('',#148988,.F.); +#148988 = EDGE_LOOP('',(#148989,#149000,#149008,#149016,#149024,#149033, + #149041,#149050,#149058,#149066)); +#148989 = ORIENTED_EDGE('',*,*,#148990,.T.); +#148990 = EDGE_CURVE('',#148991,#148993,#148995,.T.); +#148991 = VERTEX_POINT('',#148992); +#148992 = CARTESIAN_POINT('',(107.562699,-110.457177,1.585)); +#148993 = VERTEX_POINT('',#148994); +#148994 = CARTESIAN_POINT('',(107.270601,-110.457177,1.585)); +#148995 = CIRCLE('',#148996,0.252889603602); +#148996 = AXIS2_PLACEMENT_3D('',#148997,#148998,#148999); +#148997 = CARTESIAN_POINT('',(107.41665,-110.66363,1.585)); +#148998 = DIRECTION('',(0.,0.,1.)); +#148999 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#149000 = ORIENTED_EDGE('',*,*,#149001,.T.); +#149001 = EDGE_CURVE('',#148993,#149002,#149004,.T.); +#149002 = VERTEX_POINT('',#149003); +#149003 = CARTESIAN_POINT('',(107.240194,-110.487584,1.585)); +#149004 = LINE('',#149005,#149006); +#149005 = CARTESIAN_POINT('',(107.270601,-110.457177,1.585)); +#149006 = VECTOR('',#149007,1.); +#149007 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#149008 = ORIENTED_EDGE('',*,*,#149009,.T.); +#149009 = EDGE_CURVE('',#149002,#149010,#149012,.T.); +#149010 = VERTEX_POINT('',#149011); +#149011 = CARTESIAN_POINT('',(107.205936,-110.5561,1.585)); +#149012 = LINE('',#149013,#149014); +#149013 = CARTESIAN_POINT('',(107.240194,-110.487584,1.585)); +#149014 = VECTOR('',#149015,1.); +#149015 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#149016 = ORIENTED_EDGE('',*,*,#149017,.T.); +#149017 = EDGE_CURVE('',#149010,#149018,#149020,.T.); +#149018 = VERTEX_POINT('',#149019); +#149019 = CARTESIAN_POINT('',(107.205936,-110.568309,1.585)); +#149020 = LINE('',#149021,#149022); +#149021 = CARTESIAN_POINT('',(107.205936,-110.5561,1.585)); +#149022 = VECTOR('',#149023,1.); +#149023 = DIRECTION('',(0.,-1.,0.)); +#149024 = ORIENTED_EDGE('',*,*,#149025,.T.); +#149025 = EDGE_CURVE('',#149018,#149026,#149028,.T.); +#149026 = VERTEX_POINT('',#149027); +#149027 = CARTESIAN_POINT('',(107.339117,-110.70149,1.585)); +#149028 = CIRCLE('',#149029,0.18686440374); +#149029 = AXIS2_PLACEMENT_3D('',#149030,#149031,#149032); +#149030 = CARTESIAN_POINT('',(107.386653,-110.520773,1.585)); +#149031 = DIRECTION('',(0.,0.,1.)); +#149032 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#149033 = ORIENTED_EDGE('',*,*,#149034,.T.); +#149034 = EDGE_CURVE('',#149026,#149035,#149037,.T.); +#149035 = VERTEX_POINT('',#149036); +#149036 = CARTESIAN_POINT('',(107.494183,-110.70149,1.585)); +#149037 = LINE('',#149038,#149039); +#149038 = CARTESIAN_POINT('',(107.339117,-110.70149,1.585)); +#149039 = VECTOR('',#149040,1.); +#149040 = DIRECTION('',(1.,0.,0.)); +#149041 = ORIENTED_EDGE('',*,*,#149042,.T.); +#149042 = EDGE_CURVE('',#149035,#149043,#149045,.T.); +#149043 = VERTEX_POINT('',#149044); +#149044 = CARTESIAN_POINT('',(107.627364,-110.568309,1.585)); +#149045 = CIRCLE('',#149046,0.18686440374); +#149046 = AXIS2_PLACEMENT_3D('',#149047,#149048,#149049); +#149047 = CARTESIAN_POINT('',(107.446647,-110.520773,1.585)); +#149048 = DIRECTION('',(0.,0.,1.)); +#149049 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#149050 = ORIENTED_EDGE('',*,*,#149051,.T.); +#149051 = EDGE_CURVE('',#149043,#149052,#149054,.T.); +#149052 = VERTEX_POINT('',#149053); +#149053 = CARTESIAN_POINT('',(107.627364,-110.5561,1.585)); +#149054 = LINE('',#149055,#149056); +#149055 = CARTESIAN_POINT('',(107.627364,-110.568309,1.585)); +#149056 = VECTOR('',#149057,1.); +#149057 = DIRECTION('',(0.,1.,0.)); +#149058 = ORIENTED_EDGE('',*,*,#149059,.T.); +#149059 = EDGE_CURVE('',#149052,#149060,#149062,.T.); +#149060 = VERTEX_POINT('',#149061); +#149061 = CARTESIAN_POINT('',(107.593106,-110.487584,1.585)); +#149062 = LINE('',#149063,#149064); +#149063 = CARTESIAN_POINT('',(107.627364,-110.5561,1.585)); +#149064 = VECTOR('',#149065,1.); +#149065 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#149066 = ORIENTED_EDGE('',*,*,#149067,.T.); +#149067 = EDGE_CURVE('',#149060,#148991,#149068,.T.); +#149068 = LINE('',#149069,#149070); +#149069 = CARTESIAN_POINT('',(107.593106,-110.487584,1.585)); +#149070 = VECTOR('',#149071,1.); +#149071 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#149072 = PLANE('',#149073); +#149073 = AXIS2_PLACEMENT_3D('',#149074,#149075,#149076); +#149074 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149075 = DIRECTION('',(0.,0.,1.)); +#149076 = DIRECTION('',(1.,0.,-0.)); +#149077 = SHELL_BASED_SURFACE_MODEL('',(#149078)); +#149078 = OPEN_SHELL('',(#149079)); +#149079 = ADVANCED_FACE('',(#149080,#149207),#149275,.T.); +#149080 = FACE_BOUND('',#149081,.F.); +#149081 = EDGE_LOOP('',(#149082,#149093,#149101,#149110,#149118,#149126, + #149135,#149143,#149151,#149160,#149168,#149177,#149185,#149193, + #149201)); +#149082 = ORIENTED_EDGE('',*,*,#149083,.T.); +#149083 = EDGE_CURVE('',#149084,#149086,#149088,.T.); +#149084 = VERTEX_POINT('',#149085); +#149085 = CARTESIAN_POINT('',(110.851172,-110.285559,1.585)); +#149086 = VERTEX_POINT('',#149087); +#149087 = CARTESIAN_POINT('',(110.96784,-110.347919,1.585)); +#149088 = CIRCLE('',#149089,7.500000000002E-02); +#149089 = AXIS2_PLACEMENT_3D('',#149090,#149091,#149092); +#149090 = CARTESIAN_POINT('',(110.89284,-110.3479190655,1.585)); +#149091 = DIRECTION('',(0.,0.,-1.)); +#149092 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#149093 = ORIENTED_EDGE('',*,*,#149094,.T.); +#149094 = EDGE_CURVE('',#149086,#149095,#149097,.T.); +#149095 = VERTEX_POINT('',#149096); +#149096 = CARTESIAN_POINT('',(110.966399,-111.362551,1.585)); +#149097 = LINE('',#149098,#149099); +#149098 = CARTESIAN_POINT('',(110.96784,-110.347919,1.585)); +#149099 = VECTOR('',#149100,1.); +#149100 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#149101 = ORIENTED_EDGE('',*,*,#149102,.T.); +#149102 = EDGE_CURVE('',#149095,#149103,#149105,.T.); +#149103 = VERTEX_POINT('',#149104); +#149104 = CARTESIAN_POINT('',(110.847643,-111.40675,1.585)); +#149105 = CIRCLE('',#149106,7.4246560927E-02); +#149106 = AXIS2_PLACEMENT_3D('',#149107,#149108,#149109); +#149107 = CARTESIAN_POINT('',(110.89351885331,-111.3483722825,1.585)); +#149108 = DIRECTION('',(-0.,0.,-1.)); +#149109 = DIRECTION('',(0.981596262232,-0.190968002485,-0.)); +#149110 = ORIENTED_EDGE('',*,*,#149111,.T.); +#149111 = EDGE_CURVE('',#149103,#149112,#149114,.T.); +#149112 = VERTEX_POINT('',#149113); +#149113 = CARTESIAN_POINT('',(110.84491,-111.407886,1.585)); +#149114 = LINE('',#149115,#149116); +#149115 = CARTESIAN_POINT('',(110.847643,-111.40675,1.585)); +#149116 = VECTOR('',#149117,1.); +#149117 = DIRECTION('',(-0.92340645941,-0.383823541123,0.)); +#149118 = ORIENTED_EDGE('',*,*,#149119,.T.); +#149119 = EDGE_CURVE('',#149112,#149120,#149122,.T.); +#149120 = VERTEX_POINT('',#149121); +#149121 = CARTESIAN_POINT('',(110.806514,-111.391982,1.585)); +#149122 = LINE('',#149123,#149124); +#149123 = CARTESIAN_POINT('',(110.84491,-111.407886,1.585)); +#149124 = VECTOR('',#149125,1.); +#149125 = DIRECTION('',(-0.923880757036,0.382680476089,0.)); +#149126 = ORIENTED_EDGE('',*,*,#149127,.T.); +#149127 = EDGE_CURVE('',#149120,#149128,#149130,.T.); +#149128 = VERTEX_POINT('',#149129); +#149129 = CARTESIAN_POINT('',(110.693914,-111.41438,1.585)); +#149130 = CIRCLE('',#149131,0.150003237278); +#149131 = AXIS2_PLACEMENT_3D('',#149132,#149133,#149134); +#149132 = CARTESIAN_POINT('',(110.77725117824,-111.5391032372,1.585)); +#149133 = DIRECTION('',(0.,0.,1.)); +#149134 = DIRECTION('',(0.195081268148,0.980787081286,-0.)); +#149135 = ORIENTED_EDGE('',*,*,#149136,.T.); +#149136 = EDGE_CURVE('',#149128,#149137,#149139,.T.); +#149137 = VERTEX_POINT('',#149138); +#149138 = CARTESIAN_POINT('',(110.687493,-111.4208,1.585)); +#149139 = LINE('',#149140,#149141); +#149140 = CARTESIAN_POINT('',(110.693914,-111.41438,1.585)); +#149141 = VECTOR('',#149142,1.); +#149142 = DIRECTION('',(-0.707161845375,-0.70705171271,0.)); +#149143 = ORIENTED_EDGE('',*,*,#149144,.T.); +#149144 = EDGE_CURVE('',#149137,#149145,#149147,.T.); +#149145 = VERTEX_POINT('',#149146); +#149146 = CARTESIAN_POINT('',(110.587316,-111.420256,1.585)); +#149147 = LINE('',#149148,#149149); +#149148 = CARTESIAN_POINT('',(110.687493,-111.4208,1.585)); +#149149 = VECTOR('',#149150,1.); +#149150 = DIRECTION('',(-0.999985255768,5.430308146009E-03,0.)); +#149151 = ORIENTED_EDGE('',*,*,#149152,.T.); +#149152 = EDGE_CURVE('',#149145,#149153,#149155,.T.); +#149153 = VERTEX_POINT('',#149154); +#149154 = CARTESIAN_POINT('',(110.343091,-111.172074,1.585)); +#149155 = CIRCLE('',#149156,0.348628446662); +#149156 = AXIS2_PLACEMENT_3D('',#149157,#149158,#149159); +#149157 = CARTESIAN_POINT('',(110.68049161322,-111.0843094284,1.585)); +#149158 = DIRECTION('',(0.,0.,-1.)); +#149159 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#149160 = ORIENTED_EDGE('',*,*,#149161,.T.); +#149161 = EDGE_CURVE('',#149153,#149162,#149164,.T.); +#149162 = VERTEX_POINT('',#149163); +#149163 = CARTESIAN_POINT('',(110.344313,-110.851919,1.585)); +#149164 = LINE('',#149165,#149166); +#149165 = CARTESIAN_POINT('',(110.343091,-111.172074,1.585)); +#149166 = VECTOR('',#149167,1.); +#149167 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#149168 = ORIENTED_EDGE('',*,*,#149169,.T.); +#149169 = EDGE_CURVE('',#149162,#149170,#149172,.T.); +#149170 = VERTEX_POINT('',#149171); +#149171 = CARTESIAN_POINT('',(110.592494,-110.607693,1.585)); +#149172 = CIRCLE('',#149173,0.3486213829); +#149173 = AXIS2_PLACEMENT_3D('',#149174,#149175,#149176); +#149174 = CARTESIAN_POINT('',(110.68025422951,-110.9450874438,1.585)); +#149175 = DIRECTION('',(0.,0.,-1.)); +#149176 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#149177 = ORIENTED_EDGE('',*,*,#149178,.T.); +#149178 = EDGE_CURVE('',#149170,#149179,#149181,.T.); +#149179 = VERTEX_POINT('',#149180); +#149180 = CARTESIAN_POINT('',(110.81784,-110.609079,1.585)); +#149181 = LINE('',#149182,#149183); +#149182 = CARTESIAN_POINT('',(110.592494,-110.607693,1.585)); +#149183 = VECTOR('',#149184,1.); +#149184 = DIRECTION('',(0.999981085954,-6.150425501802E-03,0.)); +#149185 = ORIENTED_EDGE('',*,*,#149186,.T.); +#149186 = EDGE_CURVE('',#149179,#149187,#149189,.T.); +#149187 = VERTEX_POINT('',#149188); +#149188 = CARTESIAN_POINT('',(110.819281,-110.333287,1.585)); +#149189 = LINE('',#149190,#149191); +#149190 = CARTESIAN_POINT('',(110.81784,-110.609079,1.585)); +#149191 = VECTOR('',#149192,1.); +#149192 = DIRECTION('',(5.22488081838E-03,0.999986350217,0.)); +#149193 = ORIENTED_EDGE('',*,*,#149194,.T.); +#149194 = EDGE_CURVE('',#149187,#149195,#149197,.T.); +#149195 = VERTEX_POINT('',#149196); +#149196 = CARTESIAN_POINT('',(110.83048,-110.306251,1.585)); +#149197 = LINE('',#149198,#149199); +#149198 = CARTESIAN_POINT('',(110.819281,-110.333287,1.585)); +#149199 = VECTOR('',#149200,1.); +#149200 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#149201 = ORIENTED_EDGE('',*,*,#149202,.T.); +#149202 = EDGE_CURVE('',#149195,#149084,#149203,.T.); +#149203 = LINE('',#149204,#149205); +#149204 = CARTESIAN_POINT('',(110.83048,-110.306251,1.585)); +#149205 = VECTOR('',#149206,1.); +#149206 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#149207 = FACE_BOUND('',#149208,.F.); +#149208 = EDGE_LOOP('',(#149209,#149219,#149227,#149236,#149244,#149253, + #149261,#149269)); +#149209 = ORIENTED_EDGE('',*,*,#149210,.T.); +#149210 = EDGE_CURVE('',#149211,#149213,#149215,.T.); +#149211 = VERTEX_POINT('',#149212); +#149212 = CARTESIAN_POINT('',(110.81784,-110.775223,1.585)); +#149213 = VERTEX_POINT('',#149214); +#149214 = CARTESIAN_POINT('',(110.779897,-110.756252,1.585)); +#149215 = LINE('',#149216,#149217); +#149216 = CARTESIAN_POINT('',(110.81784,-110.775223,1.585)); +#149217 = VECTOR('',#149218,1.); +#149218 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#149219 = ORIENTED_EDGE('',*,*,#149220,.T.); +#149220 = EDGE_CURVE('',#149213,#149221,#149223,.T.); +#149221 = VERTEX_POINT('',#149222); +#149222 = CARTESIAN_POINT('',(110.624831,-110.756252,1.585)); +#149223 = LINE('',#149224,#149225); +#149224 = CARTESIAN_POINT('',(110.779897,-110.756252,1.585)); +#149225 = VECTOR('',#149226,1.); +#149226 = DIRECTION('',(-1.,0.,0.)); +#149227 = ORIENTED_EDGE('',*,*,#149228,.T.); +#149228 = EDGE_CURVE('',#149221,#149229,#149231,.T.); +#149229 = VERTEX_POINT('',#149230); +#149230 = CARTESIAN_POINT('',(110.49165,-110.889433,1.585)); +#149231 = CIRCLE('',#149232,0.18686440374); +#149232 = AXIS2_PLACEMENT_3D('',#149233,#149234,#149235); +#149233 = CARTESIAN_POINT('',(110.672367,-110.936969,1.585)); +#149234 = DIRECTION('',(0.,0.,1.)); +#149235 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#149236 = ORIENTED_EDGE('',*,*,#149237,.T.); +#149237 = EDGE_CURVE('',#149229,#149238,#149240,.T.); +#149238 = VERTEX_POINT('',#149239); +#149239 = CARTESIAN_POINT('',(110.49165,-111.139737,1.585)); +#149240 = LINE('',#149241,#149242); +#149241 = CARTESIAN_POINT('',(110.49165,-110.889433,1.585)); +#149242 = VECTOR('',#149243,1.); +#149243 = DIRECTION('',(0.,-1.,0.)); +#149244 = ORIENTED_EDGE('',*,*,#149245,.T.); +#149245 = EDGE_CURVE('',#149238,#149246,#149248,.T.); +#149246 = VERTEX_POINT('',#149247); +#149247 = CARTESIAN_POINT('',(110.624831,-111.272919,1.585)); +#149248 = CIRCLE('',#149249,0.186867373533); +#149249 = AXIS2_PLACEMENT_3D('',#149250,#149251,#149252); +#149250 = CARTESIAN_POINT('',(110.67236971388,-111.092199643,1.585)); +#149251 = DIRECTION('',(0.,0.,1.)); +#149252 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#149253 = ORIENTED_EDGE('',*,*,#149254,.T.); +#149254 = EDGE_CURVE('',#149246,#149255,#149257,.T.); +#149255 = VERTEX_POINT('',#149256); +#149256 = CARTESIAN_POINT('',(110.779897,-111.272919,1.585)); +#149257 = LINE('',#149258,#149259); +#149258 = CARTESIAN_POINT('',(110.624831,-111.272919,1.585)); +#149259 = VECTOR('',#149260,1.); +#149260 = DIRECTION('',(1.,0.,0.)); +#149261 = ORIENTED_EDGE('',*,*,#149262,.T.); +#149262 = EDGE_CURVE('',#149255,#149263,#149265,.T.); +#149263 = VERTEX_POINT('',#149264); +#149264 = CARTESIAN_POINT('',(110.81784,-111.253947,1.585)); +#149265 = LINE('',#149266,#149267); +#149266 = CARTESIAN_POINT('',(110.779897,-111.272919,1.585)); +#149267 = VECTOR('',#149268,1.); +#149268 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#149269 = ORIENTED_EDGE('',*,*,#149270,.T.); +#149270 = EDGE_CURVE('',#149263,#149211,#149271,.T.); +#149271 = LINE('',#149272,#149273); +#149272 = CARTESIAN_POINT('',(110.81784,-111.253947,1.585)); +#149273 = VECTOR('',#149274,1.); +#149274 = DIRECTION('',(0.,1.,0.)); +#149275 = PLANE('',#149276); +#149276 = AXIS2_PLACEMENT_3D('',#149277,#149278,#149279); +#149277 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149278 = DIRECTION('',(0.,0.,1.)); +#149279 = DIRECTION('',(1.,0.,-0.)); +#149280 = SHELL_BASED_SURFACE_MODEL('',(#149281)); +#149281 = OPEN_SHELL('',(#149282)); +#149282 = ADVANCED_FACE('',(#149283),#149441,.T.); +#149283 = FACE_BOUND('',#149284,.F.); +#149284 = EDGE_LOOP('',(#149285,#149295,#149303,#149312,#149320,#149328, + #149336,#149344,#149352,#149361,#149369,#149377,#149386,#149394, + #149402,#149411,#149419,#149427,#149435)); +#149285 = ORIENTED_EDGE('',*,*,#149286,.T.); +#149286 = EDGE_CURVE('',#149287,#149289,#149291,.T.); +#149287 = VERTEX_POINT('',#149288); +#149288 = CARTESIAN_POINT('',(111.383109,-110.328456,1.585)); +#149289 = VERTEX_POINT('',#149290); +#149290 = CARTESIAN_POINT('',(111.497256,-110.27436,1.585)); +#149291 = LINE('',#149292,#149293); +#149292 = CARTESIAN_POINT('',(111.383109,-110.328456,1.585)); +#149293 = VECTOR('',#149294,1.); +#149294 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#149295 = ORIENTED_EDGE('',*,*,#149296,.T.); +#149296 = EDGE_CURVE('',#149289,#149297,#149299,.T.); +#149297 = VERTEX_POINT('',#149298); +#149298 = CARTESIAN_POINT('',(111.621758,-110.27436,1.585)); +#149299 = LINE('',#149300,#149301); +#149300 = CARTESIAN_POINT('',(111.497256,-110.27436,1.585)); +#149301 = VECTOR('',#149302,1.); +#149302 = DIRECTION('',(1.,0.,0.)); +#149303 = ORIENTED_EDGE('',*,*,#149304,.T.); +#149304 = EDGE_CURVE('',#149297,#149305,#149307,.T.); +#149305 = VERTEX_POINT('',#149306); +#149306 = CARTESIAN_POINT('',(111.607126,-110.422919,1.585)); +#149307 = CIRCLE('',#149308,7.500006711464E-02); +#149308 = AXIS2_PLACEMENT_3D('',#149309,#149310,#149311); +#149309 = CARTESIAN_POINT('',(111.60712606711,-110.3479189328,1.585)); +#149310 = DIRECTION('',(0.,0.,-1.)); +#149311 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149312 = ORIENTED_EDGE('',*,*,#149313,.T.); +#149313 = EDGE_CURVE('',#149305,#149314,#149316,.T.); +#149314 = VERTEX_POINT('',#149315); +#149315 = CARTESIAN_POINT('',(111.529593,-110.422919,1.585)); +#149316 = LINE('',#149317,#149318); +#149317 = CARTESIAN_POINT('',(111.607126,-110.422919,1.585)); +#149318 = VECTOR('',#149319,1.); +#149319 = DIRECTION('',(-1.,0.,0.)); +#149320 = ORIENTED_EDGE('',*,*,#149321,.T.); +#149321 = EDGE_CURVE('',#149314,#149322,#149324,.T.); +#149322 = VERTEX_POINT('',#149323); +#149323 = CARTESIAN_POINT('',(111.472551,-110.451439,1.585)); +#149324 = LINE('',#149325,#149326); +#149325 = CARTESIAN_POINT('',(111.529593,-110.422919,1.585)); +#149326 = VECTOR('',#149327,1.); +#149327 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#149328 = ORIENTED_EDGE('',*,*,#149329,.T.); +#149329 = EDGE_CURVE('',#149322,#149330,#149332,.T.); +#149330 = VERTEX_POINT('',#149331); +#149331 = CARTESIAN_POINT('',(111.444031,-110.508481,1.585)); +#149332 = LINE('',#149333,#149334); +#149333 = CARTESIAN_POINT('',(111.472551,-110.451439,1.585)); +#149334 = VECTOR('',#149335,1.); +#149335 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#149336 = ORIENTED_EDGE('',*,*,#149337,.T.); +#149337 = EDGE_CURVE('',#149330,#149338,#149340,.T.); +#149338 = VERTEX_POINT('',#149339); +#149339 = CARTESIAN_POINT('',(111.444031,-110.606252,1.585)); +#149340 = LINE('',#149341,#149342); +#149341 = CARTESIAN_POINT('',(111.444031,-110.508481,1.585)); +#149342 = VECTOR('',#149343,1.); +#149343 = DIRECTION('',(0.,-1.,0.)); +#149344 = ORIENTED_EDGE('',*,*,#149345,.T.); +#149345 = EDGE_CURVE('',#149338,#149346,#149348,.T.); +#149346 = VERTEX_POINT('',#149347); +#149347 = CARTESIAN_POINT('',(111.621758,-110.607693,1.585)); +#149348 = LINE('',#149349,#149350); +#149349 = CARTESIAN_POINT('',(111.444031,-110.606252,1.585)); +#149350 = VECTOR('',#149351,1.); +#149351 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#149352 = ORIENTED_EDGE('',*,*,#149353,.T.); +#149353 = EDGE_CURVE('',#149346,#149354,#149356,.T.); +#149354 = VERTEX_POINT('',#149355); +#149355 = CARTESIAN_POINT('',(111.607126,-110.756252,1.585)); +#149356 = CIRCLE('',#149357,7.500006711464E-02); +#149357 = AXIS2_PLACEMENT_3D('',#149358,#149359,#149360); +#149358 = CARTESIAN_POINT('',(111.60712606711,-110.6812519328,1.585)); +#149359 = DIRECTION('',(0.,0.,-1.)); +#149360 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149361 = ORIENTED_EDGE('',*,*,#149362,.T.); +#149362 = EDGE_CURVE('',#149354,#149363,#149365,.T.); +#149363 = VERTEX_POINT('',#149364); +#149364 = CARTESIAN_POINT('',(111.444031,-110.756252,1.585)); +#149365 = LINE('',#149366,#149367); +#149366 = CARTESIAN_POINT('',(111.607126,-110.756252,1.585)); +#149367 = VECTOR('',#149368,1.); +#149368 = DIRECTION('',(-1.,0.,0.)); +#149369 = ORIENTED_EDGE('',*,*,#149370,.T.); +#149370 = EDGE_CURVE('',#149363,#149371,#149373,.T.); +#149371 = VERTEX_POINT('',#149372); +#149372 = CARTESIAN_POINT('',(111.44259,-111.362551,1.585)); +#149373 = LINE('',#149374,#149375); +#149374 = CARTESIAN_POINT('',(111.444031,-110.756252,1.585)); +#149375 = VECTOR('',#149376,1.); +#149376 = DIRECTION('',(-2.376708406372E-03,-0.999997175625,0.)); +#149377 = ORIENTED_EDGE('',*,*,#149378,.T.); +#149378 = EDGE_CURVE('',#149371,#149379,#149381,.T.); +#149379 = VERTEX_POINT('',#149380); +#149380 = CARTESIAN_POINT('',(111.294031,-111.347919,1.585)); +#149381 = CIRCLE('',#149382,7.500006711463E-02); +#149382 = AXIS2_PLACEMENT_3D('',#149383,#149384,#149385); +#149383 = CARTESIAN_POINT('',(111.36903106711,-111.3479190671,1.585)); +#149384 = DIRECTION('',(-0.,0.,-1.)); +#149385 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#149386 = ORIENTED_EDGE('',*,*,#149387,.T.); +#149387 = EDGE_CURVE('',#149379,#149388,#149390,.T.); +#149388 = VERTEX_POINT('',#149389); +#149389 = CARTESIAN_POINT('',(111.294031,-110.756252,1.585)); +#149390 = LINE('',#149391,#149392); +#149391 = CARTESIAN_POINT('',(111.294031,-111.347919,1.585)); +#149392 = VECTOR('',#149393,1.); +#149393 = DIRECTION('',(0.,1.,0.)); +#149394 = ORIENTED_EDGE('',*,*,#149395,.T.); +#149395 = EDGE_CURVE('',#149388,#149396,#149398,.T.); +#149396 = VERTEX_POINT('',#149397); +#149397 = CARTESIAN_POINT('',(111.211542,-110.754811,1.585)); +#149398 = LINE('',#149399,#149400); +#149399 = CARTESIAN_POINT('',(111.294031,-110.756252,1.585)); +#149400 = VECTOR('',#149401,1.); +#149401 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#149402 = ORIENTED_EDGE('',*,*,#149403,.T.); +#149403 = EDGE_CURVE('',#149396,#149404,#149406,.T.); +#149404 = VERTEX_POINT('',#149405); +#149405 = CARTESIAN_POINT('',(111.226174,-110.606252,1.585)); +#149406 = CIRCLE('',#149407,7.500006711463E-02); +#149407 = AXIS2_PLACEMENT_3D('',#149408,#149409,#149410); +#149408 = CARTESIAN_POINT('',(111.22617393288,-110.6812520671,1.585)); +#149409 = DIRECTION('',(0.,0.,-1.)); +#149410 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#149411 = ORIENTED_EDGE('',*,*,#149412,.T.); +#149412 = EDGE_CURVE('',#149404,#149413,#149415,.T.); +#149413 = VERTEX_POINT('',#149414); +#149414 = CARTESIAN_POINT('',(111.294031,-110.606252,1.585)); +#149415 = LINE('',#149416,#149417); +#149416 = CARTESIAN_POINT('',(111.226174,-110.606252,1.585)); +#149417 = VECTOR('',#149418,1.); +#149418 = DIRECTION('',(1.,0.,0.)); +#149419 = ORIENTED_EDGE('',*,*,#149420,.T.); +#149420 = EDGE_CURVE('',#149413,#149421,#149423,.T.); +#149421 = VERTEX_POINT('',#149422); +#149422 = CARTESIAN_POINT('',(111.296694,-110.470967,1.585)); +#149423 = LINE('',#149424,#149425); +#149424 = CARTESIAN_POINT('',(111.294031,-110.606252,1.585)); +#149425 = VECTOR('',#149426,1.); +#149426 = DIRECTION('',(1.968055754655E-02,0.999806319071,0.)); +#149427 = ORIENTED_EDGE('',*,*,#149428,.T.); +#149428 = EDGE_CURVE('',#149421,#149429,#149431,.T.); +#149429 = VERTEX_POINT('',#149430); +#149430 = CARTESIAN_POINT('',(111.3574,-110.349554,1.585)); +#149431 = LINE('',#149432,#149433); +#149432 = CARTESIAN_POINT('',(111.296694,-110.470967,1.585)); +#149433 = VECTOR('',#149434,1.); +#149434 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#149435 = ORIENTED_EDGE('',*,*,#149436,.T.); +#149436 = EDGE_CURVE('',#149429,#149287,#149437,.T.); +#149437 = LINE('',#149438,#149439); +#149438 = CARTESIAN_POINT('',(111.3574,-110.349554,1.585)); +#149439 = VECTOR('',#149440,1.); +#149440 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#149441 = PLANE('',#149442); +#149442 = AXIS2_PLACEMENT_3D('',#149443,#149444,#149445); +#149443 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149444 = DIRECTION('',(0.,0.,1.)); +#149445 = DIRECTION('',(1.,0.,-0.)); +#149446 = SHELL_BASED_SURFACE_MODEL('',(#149447)); +#149447 = OPEN_SHELL('',(#149448)); +#149448 = ADVANCED_FACE('',(#149449),#149591,.T.); +#149449 = FACE_BOUND('',#149450,.F.); +#149450 = EDGE_LOOP('',(#149451,#149462,#149470,#149478,#149486,#149494, + #149502,#149510,#149518,#149527,#149535,#149544,#149552,#149560, + #149568,#149576,#149585)); +#149451 = ORIENTED_EDGE('',*,*,#149452,.T.); +#149452 = EDGE_CURVE('',#149453,#149455,#149457,.T.); +#149453 = VERTEX_POINT('',#149454); +#149454 = CARTESIAN_POINT('',(111.898792,-110.618892,1.585)); +#149455 = VERTEX_POINT('',#149456); +#149456 = CARTESIAN_POINT('',(112.01546,-110.681252,1.585)); +#149457 = CIRCLE('',#149458,7.500000000003E-02); +#149458 = AXIS2_PLACEMENT_3D('',#149459,#149460,#149461); +#149459 = CARTESIAN_POINT('',(111.94046,-110.6812520655,1.585)); +#149460 = DIRECTION('',(0.,0.,-1.)); +#149461 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#149462 = ORIENTED_EDGE('',*,*,#149463,.T.); +#149463 = EDGE_CURVE('',#149455,#149464,#149466,.T.); +#149464 = VERTEX_POINT('',#149465); +#149465 = CARTESIAN_POINT('',(112.01546,-111.187356,1.585)); +#149466 = LINE('',#149467,#149468); +#149467 = CARTESIAN_POINT('',(112.01546,-110.681252,1.585)); +#149468 = VECTOR('',#149469,1.); +#149469 = DIRECTION('',(0.,-1.,0.)); +#149470 = ORIENTED_EDGE('',*,*,#149471,.T.); +#149471 = EDGE_CURVE('',#149464,#149472,#149474,.T.); +#149472 = VERTEX_POINT('',#149473); +#149473 = CARTESIAN_POINT('',(112.04398,-111.244398,1.585)); +#149474 = LINE('',#149475,#149476); +#149475 = CARTESIAN_POINT('',(112.01546,-111.187356,1.585)); +#149476 = VECTOR('',#149477,1.); +#149477 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#149478 = ORIENTED_EDGE('',*,*,#149479,.T.); +#149479 = EDGE_CURVE('',#149472,#149480,#149482,.T.); +#149480 = VERTEX_POINT('',#149481); +#149481 = CARTESIAN_POINT('',(112.101022,-111.272919,1.585)); +#149482 = LINE('',#149483,#149484); +#149483 = CARTESIAN_POINT('',(112.04398,-111.244398,1.585)); +#149484 = VECTOR('',#149485,1.); +#149485 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#149486 = ORIENTED_EDGE('',*,*,#149487,.T.); +#149487 = EDGE_CURVE('',#149480,#149488,#149490,.T.); +#149488 = VERTEX_POINT('',#149489); +#149489 = CARTESIAN_POINT('',(112.208469,-111.272919,1.585)); +#149490 = LINE('',#149491,#149492); +#149491 = CARTESIAN_POINT('',(112.101022,-111.272919,1.585)); +#149492 = VECTOR('',#149493,1.); +#149493 = DIRECTION('',(1.,0.,0.)); +#149494 = ORIENTED_EDGE('',*,*,#149495,.T.); +#149495 = EDGE_CURVE('',#149488,#149496,#149498,.T.); +#149496 = VERTEX_POINT('',#149497); +#149497 = CARTESIAN_POINT('',(112.276984,-111.238661,1.585)); +#149498 = LINE('',#149499,#149500); +#149499 = CARTESIAN_POINT('',(112.208469,-111.272919,1.585)); +#149500 = VECTOR('',#149501,1.); +#149501 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#149502 = ORIENTED_EDGE('',*,*,#149503,.T.); +#149503 = EDGE_CURVE('',#149496,#149504,#149506,.T.); +#149504 = VERTEX_POINT('',#149505); +#149505 = CARTESIAN_POINT('',(112.294031,-111.221614,1.585)); +#149506 = LINE('',#149507,#149508); +#149507 = CARTESIAN_POINT('',(112.276984,-111.238661,1.585)); +#149508 = VECTOR('',#149509,1.); +#149509 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#149510 = ORIENTED_EDGE('',*,*,#149511,.T.); +#149511 = EDGE_CURVE('',#149504,#149512,#149514,.T.); +#149512 = VERTEX_POINT('',#149513); +#149513 = CARTESIAN_POINT('',(112.295472,-110.66662,1.585)); +#149514 = LINE('',#149515,#149516); +#149515 = CARTESIAN_POINT('',(112.294031,-111.221614,1.585)); +#149516 = VECTOR('',#149517,1.); +#149517 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#149518 = ORIENTED_EDGE('',*,*,#149519,.T.); +#149519 = EDGE_CURVE('',#149512,#149520,#149522,.T.); +#149520 = VERTEX_POINT('',#149521); +#149521 = CARTESIAN_POINT('',(112.444031,-110.681252,1.585)); +#149522 = CIRCLE('',#149523,7.500006711464E-02); +#149523 = AXIS2_PLACEMENT_3D('',#149524,#149525,#149526); +#149524 = CARTESIAN_POINT('',(112.36903093288,-110.6812519328,1.585)); +#149525 = DIRECTION('',(0.,0.,-1.)); +#149526 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#149527 = ORIENTED_EDGE('',*,*,#149528,.T.); +#149528 = EDGE_CURVE('',#149520,#149529,#149531,.T.); +#149529 = VERTEX_POINT('',#149530); +#149530 = CARTESIAN_POINT('',(112.44259,-111.362551,1.585)); +#149531 = LINE('',#149532,#149533); +#149532 = CARTESIAN_POINT('',(112.444031,-110.681252,1.585)); +#149533 = VECTOR('',#149534,1.); +#149534 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#149535 = ORIENTED_EDGE('',*,*,#149536,.T.); +#149536 = EDGE_CURVE('',#149529,#149537,#149539,.T.); +#149537 = VERTEX_POINT('',#149538); +#149538 = CARTESIAN_POINT('',(112.307961,-111.390877,1.585)); +#149539 = CIRCLE('',#149540,7.472335361469E-02); +#149540 = AXIS2_PLACEMENT_3D('',#149541,#149542,#149543); +#149541 = CARTESIAN_POINT('',(112.36926658714,-111.3481545871,1.585)); +#149542 = DIRECTION('',(-0.,0.,-1.)); +#149543 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#149544 = ORIENTED_EDGE('',*,*,#149545,.T.); +#149545 = EDGE_CURVE('',#149537,#149546,#149548,.T.); +#149546 = VERTEX_POINT('',#149547); +#149547 = CARTESIAN_POINT('',(112.240806,-111.421478,1.585)); +#149548 = LINE('',#149549,#149550); +#149549 = CARTESIAN_POINT('',(112.307961,-111.390877,1.585)); +#149550 = VECTOR('',#149551,1.); +#149551 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#149552 = ORIENTED_EDGE('',*,*,#149553,.T.); +#149553 = EDGE_CURVE('',#149546,#149554,#149556,.T.); +#149554 = VERTEX_POINT('',#149555); +#149555 = CARTESIAN_POINT('',(112.063507,-111.420256,1.585)); +#149556 = LINE('',#149557,#149558); +#149557 = CARTESIAN_POINT('',(112.240806,-111.421478,1.585)); +#149558 = VECTOR('',#149559,1.); +#149559 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#149560 = ORIENTED_EDGE('',*,*,#149561,.T.); +#149561 = EDGE_CURVE('',#149554,#149562,#149564,.T.); +#149562 = VERTEX_POINT('',#149563); +#149563 = CARTESIAN_POINT('',(111.942095,-111.35955,1.585)); +#149564 = LINE('',#149565,#149566); +#149565 = CARTESIAN_POINT('',(112.063507,-111.420256,1.585)); +#149566 = VECTOR('',#149567,1.); +#149567 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#149568 = ORIENTED_EDGE('',*,*,#149569,.T.); +#149569 = EDGE_CURVE('',#149562,#149570,#149572,.T.); +#149570 = VERTEX_POINT('',#149571); +#149571 = CARTESIAN_POINT('',(111.920997,-111.333841,1.585)); +#149572 = LINE('',#149573,#149574); +#149573 = CARTESIAN_POINT('',(111.942095,-111.35955,1.585)); +#149574 = VECTOR('',#149575,1.); +#149575 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#149576 = ORIENTED_EDGE('',*,*,#149577,.T.); +#149577 = EDGE_CURVE('',#149570,#149578,#149580,.T.); +#149578 = VERTEX_POINT('',#149579); +#149579 = CARTESIAN_POINT('',(111.8781,-110.639584,1.585)); +#149580 = CIRCLE('',#149581,0.780471555046); +#149581 = AXIS2_PLACEMENT_3D('',#149582,#149583,#149584); +#149582 = CARTESIAN_POINT('',(112.59691564715,-110.9436233291,1.585)); +#149583 = DIRECTION('',(0.,0.,-1.)); +#149584 = DIRECTION('',(-0.866038797673,-0.499976800387,-0.)); +#149585 = ORIENTED_EDGE('',*,*,#149586,.T.); +#149586 = EDGE_CURVE('',#149578,#149453,#149587,.T.); +#149587 = LINE('',#149588,#149589); +#149588 = CARTESIAN_POINT('',(111.8781,-110.639584,1.585)); +#149589 = VECTOR('',#149590,1.); +#149590 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#149591 = PLANE('',#149592); +#149592 = AXIS2_PLACEMENT_3D('',#149593,#149594,#149595); +#149593 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149594 = DIRECTION('',(0.,0.,1.)); +#149595 = DIRECTION('',(1.,0.,-0.)); +#149596 = SHELL_BASED_SURFACE_MODEL('',(#149597)); +#149597 = OPEN_SHELL('',(#149598)); +#149598 = ADVANCED_FACE('',(#149599),#149734,.T.); +#149599 = FACE_BOUND('',#149600,.F.); +#149600 = EDGE_LOOP('',(#149601,#149612,#149620,#149628,#149636,#149645, + #149653,#149661,#149670,#149678,#149686,#149695,#149703,#149711, + #149720,#149728)); +#149601 = ORIENTED_EDGE('',*,*,#149602,.T.); +#149602 = EDGE_CURVE('',#149603,#149605,#149607,.T.); +#149603 = VERTEX_POINT('',#149604); +#149604 = CARTESIAN_POINT('',(114.846857,-110.241051,1.585)); +#149605 = VERTEX_POINT('',#149606); +#149606 = CARTESIAN_POINT('',(114.963991,-110.324018,1.585)); +#149607 = CIRCLE('',#149608,7.499955990671E-02); +#149608 = AXIS2_PLACEMENT_3D('',#149609,#149610,#149611); +#149609 = CARTESIAN_POINT('',(114.89284050095,-110.3003000643,1.585)); +#149610 = DIRECTION('',(0.,0.,-1.)); +#149611 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#149612 = ORIENTED_EDGE('',*,*,#149613,.T.); +#149613 = EDGE_CURVE('',#149605,#149614,#149616,.T.); +#149614 = VERTEX_POINT('',#149615); +#149615 = CARTESIAN_POINT('',(114.758802,-110.939585,1.585)); +#149616 = LINE('',#149617,#149618); +#149617 = CARTESIAN_POINT('',(114.963991,-110.324018,1.585)); +#149618 = VECTOR('',#149619,1.); +#149619 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#149620 = ORIENTED_EDGE('',*,*,#149621,.T.); +#149621 = EDGE_CURVE('',#149614,#149622,#149624,.T.); +#149622 = VERTEX_POINT('',#149623); +#149623 = CARTESIAN_POINT('',(115.055935,-110.939585,1.585)); +#149624 = LINE('',#149625,#149626); +#149625 = CARTESIAN_POINT('',(114.758802,-110.939585,1.585)); +#149626 = VECTOR('',#149627,1.); +#149627 = DIRECTION('',(1.,0.,0.)); +#149628 = ORIENTED_EDGE('',*,*,#149629,.T.); +#149629 = EDGE_CURVE('',#149622,#149630,#149632,.T.); +#149630 = VERTEX_POINT('',#149631); +#149631 = CARTESIAN_POINT('',(115.057376,-110.66662,1.585)); +#149632 = LINE('',#149633,#149634); +#149633 = CARTESIAN_POINT('',(115.055935,-110.939585,1.585)); +#149634 = VECTOR('',#149635,1.); +#149635 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#149636 = ORIENTED_EDGE('',*,*,#149637,.T.); +#149637 = EDGE_CURVE('',#149630,#149638,#149640,.T.); +#149638 = VERTEX_POINT('',#149639); +#149639 = CARTESIAN_POINT('',(115.205935,-110.681252,1.585)); +#149640 = CIRCLE('',#149641,7.500006711464E-02); +#149641 = AXIS2_PLACEMENT_3D('',#149642,#149643,#149644); +#149642 = CARTESIAN_POINT('',(115.13093493288,-110.6812519328,1.585)); +#149643 = DIRECTION('',(0.,0.,-1.)); +#149644 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#149645 = ORIENTED_EDGE('',*,*,#149646,.T.); +#149646 = EDGE_CURVE('',#149638,#149647,#149649,.T.); +#149647 = VERTEX_POINT('',#149648); +#149648 = CARTESIAN_POINT('',(115.205935,-110.939585,1.585)); +#149649 = LINE('',#149650,#149651); +#149650 = CARTESIAN_POINT('',(115.205935,-110.681252,1.585)); +#149651 = VECTOR('',#149652,1.); +#149652 = DIRECTION('',(0.,-1.,0.)); +#149653 = ORIENTED_EDGE('',*,*,#149654,.T.); +#149654 = EDGE_CURVE('',#149647,#149655,#149657,.T.); +#149655 = VERTEX_POINT('',#149656); +#149656 = CARTESIAN_POINT('',(115.288424,-110.941026,1.585)); +#149657 = LINE('',#149658,#149659); +#149658 = CARTESIAN_POINT('',(115.205935,-110.939585,1.585)); +#149659 = VECTOR('',#149660,1.); +#149660 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#149661 = ORIENTED_EDGE('',*,*,#149662,.T.); +#149662 = EDGE_CURVE('',#149655,#149663,#149665,.T.); +#149663 = VERTEX_POINT('',#149664); +#149664 = CARTESIAN_POINT('',(115.273792,-111.089585,1.585)); +#149665 = CIRCLE('',#149666,7.500006711464E-02); +#149666 = AXIS2_PLACEMENT_3D('',#149667,#149668,#149669); +#149667 = CARTESIAN_POINT('',(115.27379206711,-111.0145849328,1.585)); +#149668 = DIRECTION('',(0.,0.,-1.)); +#149669 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149670 = ORIENTED_EDGE('',*,*,#149671,.T.); +#149671 = EDGE_CURVE('',#149663,#149672,#149674,.T.); +#149672 = VERTEX_POINT('',#149673); +#149673 = CARTESIAN_POINT('',(115.205935,-111.089585,1.585)); +#149674 = LINE('',#149675,#149676); +#149675 = CARTESIAN_POINT('',(115.273792,-111.089585,1.585)); +#149676 = VECTOR('',#149677,1.); +#149677 = DIRECTION('',(-1.,0.,0.)); +#149678 = ORIENTED_EDGE('',*,*,#149679,.T.); +#149679 = EDGE_CURVE('',#149672,#149680,#149682,.T.); +#149680 = VERTEX_POINT('',#149681); +#149681 = CARTESIAN_POINT('',(115.204494,-111.362551,1.585)); +#149682 = LINE('',#149683,#149684); +#149683 = CARTESIAN_POINT('',(115.205935,-111.089585,1.585)); +#149684 = VECTOR('',#149685,1.); +#149685 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#149686 = ORIENTED_EDGE('',*,*,#149687,.T.); +#149687 = EDGE_CURVE('',#149680,#149688,#149690,.T.); +#149688 = VERTEX_POINT('',#149689); +#149689 = CARTESIAN_POINT('',(115.055935,-111.347919,1.585)); +#149690 = CIRCLE('',#149691,7.500006711464E-02); +#149691 = AXIS2_PLACEMENT_3D('',#149692,#149693,#149694); +#149692 = CARTESIAN_POINT('',(115.13093506711,-111.3479190671,1.585)); +#149693 = DIRECTION('',(-0.,0.,-1.)); +#149694 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#149695 = ORIENTED_EDGE('',*,*,#149696,.T.); +#149696 = EDGE_CURVE('',#149688,#149697,#149699,.T.); +#149697 = VERTEX_POINT('',#149698); +#149698 = CARTESIAN_POINT('',(115.055935,-111.089585,1.585)); +#149699 = LINE('',#149700,#149701); +#149700 = CARTESIAN_POINT('',(115.055935,-111.347919,1.585)); +#149701 = VECTOR('',#149702,1.); +#149702 = DIRECTION('',(0.,1.,0.)); +#149703 = ORIENTED_EDGE('',*,*,#149704,.T.); +#149704 = EDGE_CURVE('',#149697,#149705,#149707,.T.); +#149705 = VERTEX_POINT('',#149706); +#149706 = CARTESIAN_POINT('',(114.640113,-111.088144,1.585)); +#149707 = LINE('',#149708,#149709); +#149708 = CARTESIAN_POINT('',(115.055935,-111.089585,1.585)); +#149709 = VECTOR('',#149710,1.); +#149710 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#149711 = ORIENTED_EDGE('',*,*,#149712,.T.); +#149712 = EDGE_CURVE('',#149705,#149713,#149715,.T.); +#149713 = VERTEX_POINT('',#149714); +#149714 = CARTESIAN_POINT('',(114.583594,-110.990868,1.585)); +#149715 = CIRCLE('',#149716,7.499997045036E-02); +#149716 = AXIS2_PLACEMENT_3D('',#149717,#149718,#149719); +#149717 = CARTESIAN_POINT('',(114.65474517257,-111.0145852133,1.585)); +#149718 = DIRECTION('',(0.,0.,-1.)); +#149719 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#149720 = ORIENTED_EDGE('',*,*,#149721,.T.); +#149721 = EDGE_CURVE('',#149713,#149722,#149724,.T.); +#149722 = VERTEX_POINT('',#149723); +#149723 = CARTESIAN_POINT('',(114.827683,-110.263158,1.585)); +#149724 = LINE('',#149725,#149726); +#149725 = CARTESIAN_POINT('',(114.583594,-110.990868,1.585)); +#149726 = VECTOR('',#149727,1.); +#149727 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#149728 = ORIENTED_EDGE('',*,*,#149729,.T.); +#149729 = EDGE_CURVE('',#149722,#149603,#149730,.T.); +#149730 = LINE('',#149731,#149732); +#149731 = CARTESIAN_POINT('',(114.827683,-110.263158,1.585)); +#149732 = VECTOR('',#149733,1.); +#149733 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#149734 = PLANE('',#149735); +#149735 = AXIS2_PLACEMENT_3D('',#149736,#149737,#149738); +#149736 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149737 = DIRECTION('',(0.,0.,1.)); +#149738 = DIRECTION('',(1.,0.,-0.)); +#149739 = SHELL_BASED_SURFACE_MODEL('',(#149740)); +#149740 = OPEN_SHELL('',(#149741)); +#149741 = ADVANCED_FACE('',(#149742),#149877,.T.); +#149742 = FACE_BOUND('',#149743,.F.); +#149743 = EDGE_LOOP('',(#149744,#149755,#149763,#149771,#149779,#149788, + #149796,#149804,#149813,#149821,#149829,#149838,#149846,#149854, + #149863,#149871)); +#149744 = ORIENTED_EDGE('',*,*,#149745,.T.); +#149745 = EDGE_CURVE('',#149746,#149748,#149750,.T.); +#149746 = VERTEX_POINT('',#149747); +#149747 = CARTESIAN_POINT('',(119.799238,-110.241051,1.585)); +#149748 = VERTEX_POINT('',#149749); +#149749 = CARTESIAN_POINT('',(119.916372,-110.324018,1.585)); +#149750 = CIRCLE('',#149751,7.499955990671E-02); +#149751 = AXIS2_PLACEMENT_3D('',#149752,#149753,#149754); +#149752 = CARTESIAN_POINT('',(119.84522150095,-110.3003000643,1.585)); +#149753 = DIRECTION('',(0.,0.,-1.)); +#149754 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#149755 = ORIENTED_EDGE('',*,*,#149756,.T.); +#149756 = EDGE_CURVE('',#149748,#149757,#149759,.T.); +#149757 = VERTEX_POINT('',#149758); +#149758 = CARTESIAN_POINT('',(119.711183,-110.939585,1.585)); +#149759 = LINE('',#149760,#149761); +#149760 = CARTESIAN_POINT('',(119.916372,-110.324018,1.585)); +#149761 = VECTOR('',#149762,1.); +#149762 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#149763 = ORIENTED_EDGE('',*,*,#149764,.T.); +#149764 = EDGE_CURVE('',#149757,#149765,#149767,.T.); +#149765 = VERTEX_POINT('',#149766); +#149766 = CARTESIAN_POINT('',(120.008316,-110.939585,1.585)); +#149767 = LINE('',#149768,#149769); +#149768 = CARTESIAN_POINT('',(119.711183,-110.939585,1.585)); +#149769 = VECTOR('',#149770,1.); +#149770 = DIRECTION('',(1.,0.,0.)); +#149771 = ORIENTED_EDGE('',*,*,#149772,.T.); +#149772 = EDGE_CURVE('',#149765,#149773,#149775,.T.); +#149773 = VERTEX_POINT('',#149774); +#149774 = CARTESIAN_POINT('',(120.009757,-110.66662,1.585)); +#149775 = LINE('',#149776,#149777); +#149776 = CARTESIAN_POINT('',(120.008316,-110.939585,1.585)); +#149777 = VECTOR('',#149778,1.); +#149778 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#149779 = ORIENTED_EDGE('',*,*,#149780,.T.); +#149780 = EDGE_CURVE('',#149773,#149781,#149783,.T.); +#149781 = VERTEX_POINT('',#149782); +#149782 = CARTESIAN_POINT('',(120.158316,-110.681252,1.585)); +#149783 = CIRCLE('',#149784,7.500006711464E-02); +#149784 = AXIS2_PLACEMENT_3D('',#149785,#149786,#149787); +#149785 = CARTESIAN_POINT('',(120.08331593288,-110.6812519328,1.585)); +#149786 = DIRECTION('',(0.,0.,-1.)); +#149787 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#149788 = ORIENTED_EDGE('',*,*,#149789,.T.); +#149789 = EDGE_CURVE('',#149781,#149790,#149792,.T.); +#149790 = VERTEX_POINT('',#149791); +#149791 = CARTESIAN_POINT('',(120.158316,-110.939585,1.585)); +#149792 = LINE('',#149793,#149794); +#149793 = CARTESIAN_POINT('',(120.158316,-110.681252,1.585)); +#149794 = VECTOR('',#149795,1.); +#149795 = DIRECTION('',(0.,-1.,0.)); +#149796 = ORIENTED_EDGE('',*,*,#149797,.T.); +#149797 = EDGE_CURVE('',#149790,#149798,#149800,.T.); +#149798 = VERTEX_POINT('',#149799); +#149799 = CARTESIAN_POINT('',(120.240805,-110.941026,1.585)); +#149800 = LINE('',#149801,#149802); +#149801 = CARTESIAN_POINT('',(120.158316,-110.939585,1.585)); +#149802 = VECTOR('',#149803,1.); +#149803 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#149804 = ORIENTED_EDGE('',*,*,#149805,.T.); +#149805 = EDGE_CURVE('',#149798,#149806,#149808,.T.); +#149806 = VERTEX_POINT('',#149807); +#149807 = CARTESIAN_POINT('',(120.226173,-111.089585,1.585)); +#149808 = CIRCLE('',#149809,7.500006711464E-02); +#149809 = AXIS2_PLACEMENT_3D('',#149810,#149811,#149812); +#149810 = CARTESIAN_POINT('',(120.22617306711,-111.0145849328,1.585)); +#149811 = DIRECTION('',(0.,0.,-1.)); +#149812 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149813 = ORIENTED_EDGE('',*,*,#149814,.T.); +#149814 = EDGE_CURVE('',#149806,#149815,#149817,.T.); +#149815 = VERTEX_POINT('',#149816); +#149816 = CARTESIAN_POINT('',(120.158316,-111.089585,1.585)); +#149817 = LINE('',#149818,#149819); +#149818 = CARTESIAN_POINT('',(120.226173,-111.089585,1.585)); +#149819 = VECTOR('',#149820,1.); +#149820 = DIRECTION('',(-1.,0.,0.)); +#149821 = ORIENTED_EDGE('',*,*,#149822,.T.); +#149822 = EDGE_CURVE('',#149815,#149823,#149825,.T.); +#149823 = VERTEX_POINT('',#149824); +#149824 = CARTESIAN_POINT('',(120.156875,-111.362551,1.585)); +#149825 = LINE('',#149826,#149827); +#149826 = CARTESIAN_POINT('',(120.158316,-111.089585,1.585)); +#149827 = VECTOR('',#149828,1.); +#149828 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#149829 = ORIENTED_EDGE('',*,*,#149830,.T.); +#149830 = EDGE_CURVE('',#149823,#149831,#149833,.T.); +#149831 = VERTEX_POINT('',#149832); +#149832 = CARTESIAN_POINT('',(120.008316,-111.347919,1.585)); +#149833 = CIRCLE('',#149834,7.500006711464E-02); +#149834 = AXIS2_PLACEMENT_3D('',#149835,#149836,#149837); +#149835 = CARTESIAN_POINT('',(120.08331606711,-111.3479190671,1.585)); +#149836 = DIRECTION('',(-0.,0.,-1.)); +#149837 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#149838 = ORIENTED_EDGE('',*,*,#149839,.T.); +#149839 = EDGE_CURVE('',#149831,#149840,#149842,.T.); +#149840 = VERTEX_POINT('',#149841); +#149841 = CARTESIAN_POINT('',(120.008316,-111.089585,1.585)); +#149842 = LINE('',#149843,#149844); +#149843 = CARTESIAN_POINT('',(120.008316,-111.347919,1.585)); +#149844 = VECTOR('',#149845,1.); +#149845 = DIRECTION('',(0.,1.,0.)); +#149846 = ORIENTED_EDGE('',*,*,#149847,.T.); +#149847 = EDGE_CURVE('',#149840,#149848,#149850,.T.); +#149848 = VERTEX_POINT('',#149849); +#149849 = CARTESIAN_POINT('',(119.592494,-111.088144,1.585)); +#149850 = LINE('',#149851,#149852); +#149851 = CARTESIAN_POINT('',(120.008316,-111.089585,1.585)); +#149852 = VECTOR('',#149853,1.); +#149853 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#149854 = ORIENTED_EDGE('',*,*,#149855,.T.); +#149855 = EDGE_CURVE('',#149848,#149856,#149858,.T.); +#149856 = VERTEX_POINT('',#149857); +#149857 = CARTESIAN_POINT('',(119.535975,-110.990868,1.585)); +#149858 = CIRCLE('',#149859,7.499997045038E-02); +#149859 = AXIS2_PLACEMENT_3D('',#149860,#149861,#149862); +#149860 = CARTESIAN_POINT('',(119.60712617257,-111.0145852133,1.585)); +#149861 = DIRECTION('',(0.,0.,-1.)); +#149862 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#149863 = ORIENTED_EDGE('',*,*,#149864,.T.); +#149864 = EDGE_CURVE('',#149856,#149865,#149867,.T.); +#149865 = VERTEX_POINT('',#149866); +#149866 = CARTESIAN_POINT('',(119.780064,-110.263158,1.585)); +#149867 = LINE('',#149868,#149869); +#149868 = CARTESIAN_POINT('',(119.535975,-110.990868,1.585)); +#149869 = VECTOR('',#149870,1.); +#149870 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#149871 = ORIENTED_EDGE('',*,*,#149872,.T.); +#149872 = EDGE_CURVE('',#149865,#149746,#149873,.T.); +#149873 = LINE('',#149874,#149875); +#149874 = CARTESIAN_POINT('',(119.780064,-110.263158,1.585)); +#149875 = VECTOR('',#149876,1.); +#149876 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#149877 = PLANE('',#149878); +#149878 = AXIS2_PLACEMENT_3D('',#149879,#149880,#149881); +#149879 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149880 = DIRECTION('',(0.,0.,1.)); +#149881 = DIRECTION('',(1.,0.,-0.)); +#149882 = SHELL_BASED_SURFACE_MODEL('',(#149883)); +#149883 = OPEN_SHELL('',(#149884)); +#149884 = ADVANCED_FACE('',(#149885),#150071,.T.); +#149885 = FACE_BOUND('',#149886,.F.); +#149886 = EDGE_LOOP('',(#149887,#149898,#149906,#149915,#149923,#149931, + #149940,#149948,#149957,#149965,#149973,#149981,#149990,#149998, + #150007,#150015,#150024,#150032,#150040,#150048,#150057,#150065)); +#149887 = ORIENTED_EDGE('',*,*,#149888,.T.); +#149888 = EDGE_CURVE('',#149889,#149891,#149893,.T.); +#149889 = VERTEX_POINT('',#149890); +#149890 = CARTESIAN_POINT('',(124.592494,-110.421478,1.585)); +#149891 = VERTEX_POINT('',#149892); +#149892 = CARTESIAN_POINT('',(124.607126,-110.272919,1.585)); +#149893 = CIRCLE('',#149894,7.500006711463E-02); +#149894 = AXIS2_PLACEMENT_3D('',#149895,#149896,#149897); +#149895 = CARTESIAN_POINT('',(124.60712593288,-110.3479190671,1.585)); +#149896 = DIRECTION('',(0.,0.,-1.)); +#149897 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#149898 = ORIENTED_EDGE('',*,*,#149899,.T.); +#149899 = EDGE_CURVE('',#149891,#149900,#149902,.T.); +#149900 = VERTEX_POINT('',#149901); +#149901 = CARTESIAN_POINT('',(125.233911,-110.273681,1.585)); +#149902 = LINE('',#149903,#149904); +#149903 = CARTESIAN_POINT('',(124.607126,-110.272919,1.585)); +#149904 = VECTOR('',#149905,1.); +#149905 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#149906 = ORIENTED_EDGE('',*,*,#149907,.T.); +#149907 = EDGE_CURVE('',#149900,#149908,#149910,.T.); +#149908 = VERTEX_POINT('',#149909); +#149909 = CARTESIAN_POINT('',(125.299732,-110.362551,1.585)); +#149910 = CIRCLE('',#149911,7.447391611627E-02); +#149911 = AXIS2_PLACEMENT_3D('',#149912,#149913,#149914); +#149912 = CARTESIAN_POINT('',(125.22673192664,-110.3478080874,1.585)); +#149913 = DIRECTION('',(0.,0.,-1.)); +#149914 = DIRECTION('',(9.639715124831E-02,0.995342950561,0.)); +#149915 = ORIENTED_EDGE('',*,*,#149916,.T.); +#149916 = EDGE_CURVE('',#149908,#149917,#149919,.T.); +#149917 = VERTEX_POINT('',#149918); +#149918 = CARTESIAN_POINT('',(125.282616,-110.397307,1.585)); +#149919 = LINE('',#149920,#149921); +#149920 = CARTESIAN_POINT('',(125.299732,-110.362551,1.585)); +#149921 = VECTOR('',#149922,1.); +#149922 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#149923 = ORIENTED_EDGE('',*,*,#149924,.T.); +#149924 = EDGE_CURVE('',#149917,#149925,#149927,.T.); +#149925 = VERTEX_POINT('',#149926); +#149926 = CARTESIAN_POINT('',(125.05572,-110.656616,1.585)); +#149927 = LINE('',#149928,#149929); +#149928 = CARTESIAN_POINT('',(125.282616,-110.397307,1.585)); +#149929 = VECTOR('',#149930,1.); +#149930 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#149931 = ORIENTED_EDGE('',*,*,#149932,.T.); +#149932 = EDGE_CURVE('',#149925,#149933,#149935,.T.); +#149933 = VERTEX_POINT('',#149934); +#149934 = CARTESIAN_POINT('',(125.299732,-110.904715,1.585)); +#149935 = CIRCLE('',#149936,0.348520834816); +#149936 = AXIS2_PLACEMENT_3D('',#149937,#149938,#149939); +#149937 = CARTESIAN_POINT('',(124.9624266174,-110.9924181993,1.585)); +#149938 = DIRECTION('',(0.,0.,-1.)); +#149939 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#149940 = ORIENTED_EDGE('',*,*,#149941,.T.); +#149941 = EDGE_CURVE('',#149933,#149942,#149944,.T.); +#149942 = VERTEX_POINT('',#149943); +#149943 = CARTESIAN_POINT('',(125.29851,-111.177252,1.585)); +#149944 = LINE('',#149945,#149946); +#149945 = CARTESIAN_POINT('',(125.299732,-110.904715,1.585)); +#149946 = VECTOR('',#149947,1.); +#149947 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#149948 = ORIENTED_EDGE('',*,*,#149949,.T.); +#149949 = EDGE_CURVE('',#149942,#149950,#149952,.T.); +#149950 = VERTEX_POINT('',#149951); +#149951 = CARTESIAN_POINT('',(125.050329,-111.421478,1.585)); +#149952 = CIRCLE('',#149953,0.348635327447); +#149953 = AXIS2_PLACEMENT_3D('',#149954,#149955,#149956); +#149954 = CARTESIAN_POINT('',(124.96255748129,-111.0840720841,1.585)); +#149955 = DIRECTION('',(0.,0.,-1.)); +#149956 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#149957 = ORIENTED_EDGE('',*,*,#149958,.T.); +#149958 = EDGE_CURVE('',#149950,#149959,#149961,.T.); +#149959 = VERTEX_POINT('',#149960); +#149960 = CARTESIAN_POINT('',(124.730173,-111.420256,1.585)); +#149961 = LINE('',#149962,#149963); +#149962 = CARTESIAN_POINT('',(125.050329,-111.421478,1.585)); +#149963 = VECTOR('',#149964,1.); +#149964 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#149965 = ORIENTED_EDGE('',*,*,#149966,.T.); +#149966 = EDGE_CURVE('',#149959,#149967,#149969,.T.); +#149967 = VERTEX_POINT('',#149968); +#149968 = CARTESIAN_POINT('',(124.60746,-111.35805,1.585)); +#149969 = LINE('',#149970,#149971); +#149970 = CARTESIAN_POINT('',(124.730173,-111.420256,1.585)); +#149971 = VECTOR('',#149972,1.); +#149972 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#149973 = ORIENTED_EDGE('',*,*,#149974,.T.); +#149974 = EDGE_CURVE('',#149967,#149975,#149977,.T.); +#149975 = VERTEX_POINT('',#149976); +#149976 = CARTESIAN_POINT('',(124.544765,-111.294347,1.585)); +#149977 = LINE('',#149978,#149979); +#149978 = CARTESIAN_POINT('',(124.60746,-111.35805,1.585)); +#149979 = VECTOR('',#149980,1.); +#149980 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#149981 = ORIENTED_EDGE('',*,*,#149982,.T.); +#149982 = EDGE_CURVE('',#149975,#149983,#149985,.T.); +#149983 = VERTEX_POINT('',#149984); +#149984 = CARTESIAN_POINT('',(124.66016,-111.199648,1.585)); +#149985 = CIRCLE('',#149986,7.50001266804E-02); +#149986 = AXIS2_PLACEMENT_3D('',#149987,#149988,#149989); +#149987 = CARTESIAN_POINT('',(124.60712605199,-111.2526802483,1.585)); +#149988 = DIRECTION('',(0.,0.,-1.)); +#149989 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#149990 = ORIENTED_EDGE('',*,*,#149991,.T.); +#149991 = EDGE_CURVE('',#149983,#149992,#149994,.T.); +#149992 = VERTEX_POINT('',#149993); +#149993 = CARTESIAN_POINT('',(124.699172,-111.238661,1.585)); +#149994 = LINE('',#149995,#149996); +#149995 = CARTESIAN_POINT('',(124.66016,-111.199648,1.585)); +#149996 = VECTOR('',#149997,1.); +#149997 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#149998 = ORIENTED_EDGE('',*,*,#149999,.T.); +#149999 = EDGE_CURVE('',#149992,#150000,#150002,.T.); +#150000 = VERTEX_POINT('',#150001); +#150001 = CARTESIAN_POINT('',(125.086507,-111.238661,1.585)); +#150002 = CIRCLE('',#150003,0.358502380266); +#150003 = AXIS2_PLACEMENT_3D('',#150004,#150005,#150006); +#150004 = CARTESIAN_POINT('',(124.8928395,-110.936971,1.585)); +#150005 = DIRECTION('',(0.,0.,1.)); +#150006 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#150007 = ORIENTED_EDGE('',*,*,#150008,.T.); +#150008 = EDGE_CURVE('',#150000,#150009,#150011,.T.); +#150009 = VERTEX_POINT('',#150010); +#150010 = CARTESIAN_POINT('',(125.116914,-111.208253,1.585)); +#150011 = LINE('',#150012,#150013); +#150012 = CARTESIAN_POINT('',(125.086507,-111.238661,1.585)); +#150013 = VECTOR('',#150014,1.); +#150014 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150015 = ORIENTED_EDGE('',*,*,#150016,.T.); +#150016 = EDGE_CURVE('',#150009,#150017,#150019,.T.); +#150017 = VERTEX_POINT('',#150018); +#150018 = CARTESIAN_POINT('',(125.116915,-110.868536,1.585)); +#150019 = CIRCLE('',#150020,0.305616146029); +#150020 = AXIS2_PLACEMENT_3D('',#150021,#150022,#150023); +#150021 = CARTESIAN_POINT('',(124.86284892049,-111.0383937521,1.585)); +#150022 = DIRECTION('',(0.,-0.,1.)); +#150023 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#150024 = ORIENTED_EDGE('',*,*,#150025,.T.); +#150025 = EDGE_CURVE('',#150017,#150026,#150028,.T.); +#150026 = VERTEX_POINT('',#150027); +#150027 = CARTESIAN_POINT('',(125.086508,-110.838129,1.585)); +#150028 = LINE('',#150029,#150030); +#150029 = CARTESIAN_POINT('',(125.116915,-110.868536,1.585)); +#150030 = VECTOR('',#150031,1.); +#150031 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#150032 = ORIENTED_EDGE('',*,*,#150033,.T.); +#150033 = EDGE_CURVE('',#150026,#150034,#150036,.T.); +#150034 = VERTEX_POINT('',#150035); +#150035 = CARTESIAN_POINT('',(125.017992,-110.803871,1.585)); +#150036 = LINE('',#150037,#150038); +#150037 = CARTESIAN_POINT('',(125.086508,-110.838129,1.585)); +#150038 = VECTOR('',#150039,1.); +#150039 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150040 = ORIENTED_EDGE('',*,*,#150041,.T.); +#150041 = EDGE_CURVE('',#150034,#150042,#150044,.T.); +#150042 = VERTEX_POINT('',#150043); +#150043 = CARTESIAN_POINT('',(124.878208,-110.80243,1.585)); +#150044 = LINE('',#150045,#150046); +#150045 = CARTESIAN_POINT('',(125.017992,-110.803871,1.585)); +#150046 = VECTOR('',#150047,1.); +#150047 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#150048 = ORIENTED_EDGE('',*,*,#150049,.T.); +#150049 = EDGE_CURVE('',#150042,#150050,#150052,.T.); +#150050 = VERTEX_POINT('',#150051); +#150051 = CARTESIAN_POINT('',(124.836397,-110.679483,1.585)); +#150052 = CIRCLE('',#150053,7.500015628755E-02); +#150053 = AXIS2_PLACEMENT_3D('',#150054,#150055,#150056); +#150054 = CARTESIAN_POINT('',(124.89284028432,-110.7288710461,1.585)); +#150055 = DIRECTION('',(0.,0.,-1.)); +#150056 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#150057 = ORIENTED_EDGE('',*,*,#150058,.T.); +#150058 = EDGE_CURVE('',#150050,#150059,#150061,.T.); +#150059 = VERTEX_POINT('',#150060); +#150060 = CARTESIAN_POINT('',(125.060891,-110.422919,1.585)); +#150061 = LINE('',#150062,#150063); +#150062 = CARTESIAN_POINT('',(124.836397,-110.679483,1.585)); +#150063 = VECTOR('',#150064,1.); +#150064 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#150065 = ORIENTED_EDGE('',*,*,#150066,.T.); +#150066 = EDGE_CURVE('',#150059,#149889,#150067,.T.); +#150067 = LINE('',#150068,#150069); +#150068 = CARTESIAN_POINT('',(125.060891,-110.422919,1.585)); +#150069 = VECTOR('',#150070,1.); +#150070 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#150071 = PLANE('',#150072); +#150072 = AXIS2_PLACEMENT_3D('',#150073,#150074,#150075); +#150073 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150074 = DIRECTION('',(0.,0.,1.)); +#150075 = DIRECTION('',(1.,0.,-0.)); +#150076 = SHELL_BASED_SURFACE_MODEL('',(#150077)); +#150077 = OPEN_SHELL('',(#150078)); +#150078 = ADVANCED_FACE('',(#150079,#150181),#150283,.T.); +#150079 = FACE_BOUND('',#150080,.F.); +#150080 = EDGE_LOOP('',(#150081,#150092,#150100,#150108,#150117,#150125, + #150133,#150142,#150150,#150158,#150167,#150175)); +#150081 = ORIENTED_EDGE('',*,*,#150082,.T.); +#150082 = EDGE_CURVE('',#150083,#150085,#150087,.T.); +#150083 = VERTEX_POINT('',#150084); +#150084 = CARTESIAN_POINT('',(125.710142,-110.33242,1.585)); +#150085 = VERTEX_POINT('',#150086); +#150086 = CARTESIAN_POINT('',(126.08298,-110.337786,1.585)); +#150087 = CIRCLE('',#150088,0.291788488016); +#150088 = AXIS2_PLACEMENT_3D('',#150089,#150090,#150091); +#150089 = CARTESIAN_POINT('',(125.89333086911,-110.5595375025,1.585)); +#150090 = DIRECTION('',(0.,0.,-1.)); +#150091 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#150092 = ORIENTED_EDGE('',*,*,#150093,.T.); +#150093 = EDGE_CURVE('',#150085,#150094,#150096,.T.); +#150094 = VERTEX_POINT('',#150095); +#150095 = CARTESIAN_POINT('',(126.146433,-110.403316,1.585)); +#150096 = LINE('',#150097,#150098); +#150097 = CARTESIAN_POINT('',(126.08298,-110.337786,1.585)); +#150098 = VECTOR('',#150099,1.); +#150099 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#150100 = ORIENTED_EDGE('',*,*,#150101,.T.); +#150101 = EDGE_CURVE('',#150094,#150102,#150104,.T.); +#150102 = VERTEX_POINT('',#150103); +#150103 = CARTESIAN_POINT('',(126.203696,-110.520205,1.585)); +#150104 = LINE('',#150105,#150106); +#150105 = CARTESIAN_POINT('',(126.146433,-110.403316,1.585)); +#150106 = VECTOR('',#150107,1.); +#150107 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#150108 = ORIENTED_EDGE('',*,*,#150109,.T.); +#150109 = EDGE_CURVE('',#150102,#150110,#150112,.T.); +#150110 = VERTEX_POINT('',#150111); +#150111 = CARTESIAN_POINT('',(126.198017,-111.190983,1.585)); +#150112 = CIRCLE('',#150113,0.967158496826); +#150113 = AXIS2_PLACEMENT_3D('',#150114,#150115,#150116); +#150114 = CARTESIAN_POINT('',(125.29374970686,-110.8479141722,1.585)); +#150115 = DIRECTION('',(0.,0.,-1.)); +#150116 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#150117 = ORIENTED_EDGE('',*,*,#150118,.T.); +#150118 = EDGE_CURVE('',#150110,#150119,#150121,.T.); +#150119 = VERTEX_POINT('',#150120); +#150120 = CARTESIAN_POINT('',(126.141067,-111.299963,1.585)); +#150121 = LINE('',#150122,#150123); +#150122 = CARTESIAN_POINT('',(126.198017,-111.190983,1.585)); +#150123 = VECTOR('',#150124,1.); +#150124 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#150125 = ORIENTED_EDGE('',*,*,#150126,.T.); +#150126 = EDGE_CURVE('',#150119,#150127,#150129,.T.); +#150127 = VERTEX_POINT('',#150128); +#150128 = CARTESIAN_POINT('',(126.075537,-111.363417,1.585)); +#150129 = LINE('',#150130,#150131); +#150130 = CARTESIAN_POINT('',(126.141067,-111.299963,1.585)); +#150131 = VECTOR('',#150132,1.); +#150132 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#150133 = ORIENTED_EDGE('',*,*,#150134,.T.); +#150134 = EDGE_CURVE('',#150127,#150135,#150137,.T.); +#150135 = VERTEX_POINT('',#150136); +#150136 = CARTESIAN_POINT('',(125.702698,-111.35805,1.585)); +#150137 = CIRCLE('',#150138,0.290998264264); +#150138 = AXIS2_PLACEMENT_3D('',#150139,#150140,#150141); +#150139 = CARTESIAN_POINT('',(125.89233341815,-111.1373275544,1.585)); +#150140 = DIRECTION('',(-0.,0.,-1.)); +#150141 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#150142 = ORIENTED_EDGE('',*,*,#150143,.T.); +#150143 = EDGE_CURVE('',#150135,#150144,#150146,.T.); +#150144 = VERTEX_POINT('',#150145); +#150145 = CARTESIAN_POINT('',(125.639245,-111.292517,1.585)); +#150146 = LINE('',#150147,#150148); +#150147 = CARTESIAN_POINT('',(125.702698,-111.35805,1.585)); +#150148 = VECTOR('',#150149,1.); +#150149 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#150150 = ORIENTED_EDGE('',*,*,#150151,.T.); +#150151 = EDGE_CURVE('',#150144,#150152,#150154,.T.); +#150152 = VERTEX_POINT('',#150153); +#150153 = CARTESIAN_POINT('',(125.581984,-111.175632,1.585)); +#150154 = LINE('',#150155,#150156); +#150155 = CARTESIAN_POINT('',(125.639245,-111.292517,1.585)); +#150156 = VECTOR('',#150157,1.); +#150157 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#150158 = ORIENTED_EDGE('',*,*,#150159,.T.); +#150159 = EDGE_CURVE('',#150152,#150160,#150162,.T.); +#150160 = VERTEX_POINT('',#150161); +#150161 = CARTESIAN_POINT('',(125.587663,-110.504854,1.585)); +#150162 = CIRCLE('',#150163,0.967158496826); +#150163 = AXIS2_PLACEMENT_3D('',#150164,#150165,#150166); +#150164 = CARTESIAN_POINT('',(126.49193029313,-110.8479228277,1.585)); +#150165 = DIRECTION('',(0.,0.,-1.)); +#150166 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#150167 = ORIENTED_EDGE('',*,*,#150168,.T.); +#150168 = EDGE_CURVE('',#150160,#150169,#150171,.T.); +#150169 = VERTEX_POINT('',#150170); +#150170 = CARTESIAN_POINT('',(125.644612,-110.395873,1.585)); +#150171 = LINE('',#150172,#150173); +#150172 = CARTESIAN_POINT('',(125.587663,-110.504854,1.585)); +#150173 = VECTOR('',#150174,1.); +#150174 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#150175 = ORIENTED_EDGE('',*,*,#150176,.T.); +#150176 = EDGE_CURVE('',#150169,#150083,#150177,.T.); +#150177 = LINE('',#150178,#150179); +#150178 = CARTESIAN_POINT('',(125.644612,-110.395873,1.585)); +#150179 = VECTOR('',#150180,1.); +#150180 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#150181 = FACE_BOUND('',#150182,.F.); +#150182 = EDGE_LOOP('',(#150183,#150194,#150202,#150210,#150219,#150227, + #150235,#150244,#150252,#150260,#150269,#150277)); +#150183 = ORIENTED_EDGE('',*,*,#150184,.T.); +#150184 = EDGE_CURVE('',#150185,#150187,#150189,.T.); +#150185 = VERTEX_POINT('',#150186); +#150186 = CARTESIAN_POINT('',(125.99127,-110.457177,1.585)); +#150187 = VERTEX_POINT('',#150188); +#150188 = CARTESIAN_POINT('',(125.79441,-110.457177,1.585)); +#150189 = CIRCLE('',#150190,0.148516804184); +#150190 = AXIS2_PLACEMENT_3D('',#150191,#150192,#150193); +#150191 = CARTESIAN_POINT('',(125.89284,-110.568392,1.585)); +#150192 = DIRECTION('',(0.,0.,1.)); +#150193 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#150194 = ORIENTED_EDGE('',*,*,#150195,.T.); +#150195 = EDGE_CURVE('',#150187,#150196,#150198,.T.); +#150196 = VERTEX_POINT('',#150197); +#150197 = CARTESIAN_POINT('',(125.764003,-110.487584,1.585)); +#150198 = LINE('',#150199,#150200); +#150199 = CARTESIAN_POINT('',(125.79441,-110.457177,1.585)); +#150200 = VECTOR('',#150201,1.); +#150201 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#150202 = ORIENTED_EDGE('',*,*,#150203,.T.); +#150203 = EDGE_CURVE('',#150196,#150204,#150206,.T.); +#150204 = VERTEX_POINT('',#150205); +#150205 = CARTESIAN_POINT('',(125.725509,-110.564571,1.585)); +#150206 = LINE('',#150207,#150208); +#150207 = CARTESIAN_POINT('',(125.764003,-110.487584,1.585)); +#150208 = VECTOR('',#150209,1.); +#150209 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#150210 = ORIENTED_EDGE('',*,*,#150211,.T.); +#150211 = EDGE_CURVE('',#150204,#150212,#150214,.T.); +#150212 = VERTEX_POINT('',#150213); +#150213 = CARTESIAN_POINT('',(125.725509,-111.131266,1.585)); +#150214 = CIRCLE('',#150215,0.815450468383); +#150215 = AXIS2_PLACEMENT_3D('',#150216,#150217,#150218); +#150216 = CARTESIAN_POINT('',(126.49014856255,-110.8479185,1.585)); +#150217 = DIRECTION('',(0.,0.,1.)); +#150218 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#150219 = ORIENTED_EDGE('',*,*,#150220,.T.); +#150220 = EDGE_CURVE('',#150212,#150221,#150223,.T.); +#150221 = VERTEX_POINT('',#150222); +#150222 = CARTESIAN_POINT('',(125.764003,-111.208253,1.585)); +#150223 = LINE('',#150224,#150225); +#150224 = CARTESIAN_POINT('',(125.725509,-111.131266,1.585)); +#150225 = VECTOR('',#150226,1.); +#150226 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#150227 = ORIENTED_EDGE('',*,*,#150228,.T.); +#150228 = EDGE_CURVE('',#150221,#150229,#150231,.T.); +#150229 = VERTEX_POINT('',#150230); +#150230 = CARTESIAN_POINT('',(125.79441,-111.238661,1.585)); +#150231 = LINE('',#150232,#150233); +#150232 = CARTESIAN_POINT('',(125.764003,-111.208253,1.585)); +#150233 = VECTOR('',#150234,1.); +#150234 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#150235 = ORIENTED_EDGE('',*,*,#150236,.T.); +#150236 = EDGE_CURVE('',#150229,#150237,#150239,.T.); +#150237 = VERTEX_POINT('',#150238); +#150238 = CARTESIAN_POINT('',(125.991269,-111.238661,1.585)); +#150239 = CIRCLE('',#150240,0.14851572397); +#150240 = AXIS2_PLACEMENT_3D('',#150241,#150242,#150243); +#150241 = CARTESIAN_POINT('',(125.8928395,-111.127447,1.585)); +#150242 = DIRECTION('',(0.,0.,1.)); +#150243 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#150244 = ORIENTED_EDGE('',*,*,#150245,.T.); +#150245 = EDGE_CURVE('',#150237,#150246,#150248,.T.); +#150246 = VERTEX_POINT('',#150247); +#150247 = CARTESIAN_POINT('',(126.021676,-111.208253,1.585)); +#150248 = LINE('',#150249,#150250); +#150249 = CARTESIAN_POINT('',(125.991269,-111.238661,1.585)); +#150250 = VECTOR('',#150251,1.); +#150251 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150252 = ORIENTED_EDGE('',*,*,#150253,.T.); +#150253 = EDGE_CURVE('',#150246,#150254,#150256,.T.); +#150254 = VERTEX_POINT('',#150255); +#150255 = CARTESIAN_POINT('',(126.06017,-111.131266,1.585)); +#150256 = LINE('',#150257,#150258); +#150257 = CARTESIAN_POINT('',(126.021676,-111.208253,1.585)); +#150258 = VECTOR('',#150259,1.); +#150259 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#150260 = ORIENTED_EDGE('',*,*,#150261,.T.); +#150261 = EDGE_CURVE('',#150254,#150262,#150264,.T.); +#150262 = VERTEX_POINT('',#150263); +#150263 = CARTESIAN_POINT('',(126.06017,-110.564571,1.585)); +#150264 = CIRCLE('',#150265,0.815433004022); +#150265 = AXIS2_PLACEMENT_3D('',#150266,#150267,#150268); +#150266 = CARTESIAN_POINT('',(125.29554906235,-110.8479185,1.585)); +#150267 = DIRECTION('',(0.,-0.,1.)); +#150268 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#150269 = ORIENTED_EDGE('',*,*,#150270,.T.); +#150270 = EDGE_CURVE('',#150262,#150271,#150273,.T.); +#150271 = VERTEX_POINT('',#150272); +#150272 = CARTESIAN_POINT('',(126.021677,-110.487584,1.585)); +#150273 = LINE('',#150274,#150275); +#150274 = CARTESIAN_POINT('',(126.06017,-110.564571,1.585)); +#150275 = VECTOR('',#150276,1.); +#150276 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#150277 = ORIENTED_EDGE('',*,*,#150278,.T.); +#150278 = EDGE_CURVE('',#150271,#150185,#150279,.T.); +#150279 = LINE('',#150280,#150281); +#150280 = CARTESIAN_POINT('',(126.021677,-110.487584,1.585)); +#150281 = VECTOR('',#150282,1.); +#150282 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#150283 = PLANE('',#150284); +#150284 = AXIS2_PLACEMENT_3D('',#150285,#150286,#150287); +#150285 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150286 = DIRECTION('',(0.,0.,1.)); +#150287 = DIRECTION('',(1.,0.,-0.)); +#150288 = SHELL_BASED_SURFACE_MODEL('',(#150289)); +#150289 = OPEN_SHELL('',(#150290)); +#150290 = ADVANCED_FACE('',(#150291),#150477,.T.); +#150291 = FACE_BOUND('',#150292,.F.); +#150292 = EDGE_LOOP('',(#150293,#150304,#150312,#150321,#150329,#150337, + #150346,#150354,#150363,#150371,#150379,#150387,#150396,#150404, + #150413,#150421,#150430,#150438,#150446,#150454,#150463,#150471)); +#150293 = ORIENTED_EDGE('',*,*,#150294,.T.); +#150294 = EDGE_CURVE('',#150295,#150297,#150299,.T.); +#150295 = VERTEX_POINT('',#150296); +#150296 = CARTESIAN_POINT('',(128.592494,-110.421478,1.585)); +#150297 = VERTEX_POINT('',#150298); +#150298 = CARTESIAN_POINT('',(128.607126,-110.272919,1.585)); +#150299 = CIRCLE('',#150300,7.500006711464E-02); +#150300 = AXIS2_PLACEMENT_3D('',#150301,#150302,#150303); +#150301 = CARTESIAN_POINT('',(128.60712593288,-110.3479190671,1.585)); +#150302 = DIRECTION('',(0.,0.,-1.)); +#150303 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#150304 = ORIENTED_EDGE('',*,*,#150305,.T.); +#150305 = EDGE_CURVE('',#150297,#150306,#150308,.T.); +#150306 = VERTEX_POINT('',#150307); +#150307 = CARTESIAN_POINT('',(129.233911,-110.273681,1.585)); +#150308 = LINE('',#150309,#150310); +#150309 = CARTESIAN_POINT('',(128.607126,-110.272919,1.585)); +#150310 = VECTOR('',#150311,1.); +#150311 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#150312 = ORIENTED_EDGE('',*,*,#150313,.T.); +#150313 = EDGE_CURVE('',#150306,#150314,#150316,.T.); +#150314 = VERTEX_POINT('',#150315); +#150315 = CARTESIAN_POINT('',(129.299732,-110.362551,1.585)); +#150316 = CIRCLE('',#150317,7.447391611626E-02); +#150317 = AXIS2_PLACEMENT_3D('',#150318,#150319,#150320); +#150318 = CARTESIAN_POINT('',(129.22673192664,-110.3478080874,1.585)); +#150319 = DIRECTION('',(0.,0.,-1.)); +#150320 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#150321 = ORIENTED_EDGE('',*,*,#150322,.T.); +#150322 = EDGE_CURVE('',#150314,#150323,#150325,.T.); +#150323 = VERTEX_POINT('',#150324); +#150324 = CARTESIAN_POINT('',(129.282616,-110.397307,1.585)); +#150325 = LINE('',#150326,#150327); +#150326 = CARTESIAN_POINT('',(129.299732,-110.362551,1.585)); +#150327 = VECTOR('',#150328,1.); +#150328 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#150329 = ORIENTED_EDGE('',*,*,#150330,.T.); +#150330 = EDGE_CURVE('',#150323,#150331,#150333,.T.); +#150331 = VERTEX_POINT('',#150332); +#150332 = CARTESIAN_POINT('',(129.05572,-110.656616,1.585)); +#150333 = LINE('',#150334,#150335); +#150334 = CARTESIAN_POINT('',(129.282616,-110.397307,1.585)); +#150335 = VECTOR('',#150336,1.); +#150336 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#150337 = ORIENTED_EDGE('',*,*,#150338,.T.); +#150338 = EDGE_CURVE('',#150331,#150339,#150341,.T.); +#150339 = VERTEX_POINT('',#150340); +#150340 = CARTESIAN_POINT('',(129.299732,-110.904715,1.585)); +#150341 = CIRCLE('',#150342,0.348520834816); +#150342 = AXIS2_PLACEMENT_3D('',#150343,#150344,#150345); +#150343 = CARTESIAN_POINT('',(128.9624266174,-110.9924181993,1.585)); +#150344 = DIRECTION('',(0.,0.,-1.)); +#150345 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#150346 = ORIENTED_EDGE('',*,*,#150347,.T.); +#150347 = EDGE_CURVE('',#150339,#150348,#150350,.T.); +#150348 = VERTEX_POINT('',#150349); +#150349 = CARTESIAN_POINT('',(129.29851,-111.177252,1.585)); +#150350 = LINE('',#150351,#150352); +#150351 = CARTESIAN_POINT('',(129.299732,-110.904715,1.585)); +#150352 = VECTOR('',#150353,1.); +#150353 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#150354 = ORIENTED_EDGE('',*,*,#150355,.T.); +#150355 = EDGE_CURVE('',#150348,#150356,#150358,.T.); +#150356 = VERTEX_POINT('',#150357); +#150357 = CARTESIAN_POINT('',(129.050329,-111.421478,1.585)); +#150358 = CIRCLE('',#150359,0.348635327447); +#150359 = AXIS2_PLACEMENT_3D('',#150360,#150361,#150362); +#150360 = CARTESIAN_POINT('',(128.96255748129,-111.0840720841,1.585)); +#150361 = DIRECTION('',(0.,0.,-1.)); +#150362 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#150363 = ORIENTED_EDGE('',*,*,#150364,.T.); +#150364 = EDGE_CURVE('',#150356,#150365,#150367,.T.); +#150365 = VERTEX_POINT('',#150366); +#150366 = CARTESIAN_POINT('',(128.730173,-111.420256,1.585)); +#150367 = LINE('',#150368,#150369); +#150368 = CARTESIAN_POINT('',(129.050329,-111.421478,1.585)); +#150369 = VECTOR('',#150370,1.); +#150370 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#150371 = ORIENTED_EDGE('',*,*,#150372,.T.); +#150372 = EDGE_CURVE('',#150365,#150373,#150375,.T.); +#150373 = VERTEX_POINT('',#150374); +#150374 = CARTESIAN_POINT('',(128.60746,-111.35805,1.585)); +#150375 = LINE('',#150376,#150377); +#150376 = CARTESIAN_POINT('',(128.730173,-111.420256,1.585)); +#150377 = VECTOR('',#150378,1.); +#150378 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#150379 = ORIENTED_EDGE('',*,*,#150380,.T.); +#150380 = EDGE_CURVE('',#150373,#150381,#150383,.T.); +#150381 = VERTEX_POINT('',#150382); +#150382 = CARTESIAN_POINT('',(128.544765,-111.294347,1.585)); +#150383 = LINE('',#150384,#150385); +#150384 = CARTESIAN_POINT('',(128.60746,-111.35805,1.585)); +#150385 = VECTOR('',#150386,1.); +#150386 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#150387 = ORIENTED_EDGE('',*,*,#150388,.T.); +#150388 = EDGE_CURVE('',#150381,#150389,#150391,.T.); +#150389 = VERTEX_POINT('',#150390); +#150390 = CARTESIAN_POINT('',(128.66016,-111.199648,1.585)); +#150391 = CIRCLE('',#150392,7.500012668039E-02); +#150392 = AXIS2_PLACEMENT_3D('',#150393,#150394,#150395); +#150393 = CARTESIAN_POINT('',(128.60712605199,-111.2526802483,1.585)); +#150394 = DIRECTION('',(0.,0.,-1.)); +#150395 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#150396 = ORIENTED_EDGE('',*,*,#150397,.T.); +#150397 = EDGE_CURVE('',#150389,#150398,#150400,.T.); +#150398 = VERTEX_POINT('',#150399); +#150399 = CARTESIAN_POINT('',(128.699172,-111.238661,1.585)); +#150400 = LINE('',#150401,#150402); +#150401 = CARTESIAN_POINT('',(128.66016,-111.199648,1.585)); +#150402 = VECTOR('',#150403,1.); +#150403 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#150404 = ORIENTED_EDGE('',*,*,#150405,.T.); +#150405 = EDGE_CURVE('',#150398,#150406,#150408,.T.); +#150406 = VERTEX_POINT('',#150407); +#150407 = CARTESIAN_POINT('',(129.086507,-111.238661,1.585)); +#150408 = CIRCLE('',#150409,0.358502380266); +#150409 = AXIS2_PLACEMENT_3D('',#150410,#150411,#150412); +#150410 = CARTESIAN_POINT('',(128.8928395,-110.936971,1.585)); +#150411 = DIRECTION('',(0.,0.,1.)); +#150412 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#150413 = ORIENTED_EDGE('',*,*,#150414,.T.); +#150414 = EDGE_CURVE('',#150406,#150415,#150417,.T.); +#150415 = VERTEX_POINT('',#150416); +#150416 = CARTESIAN_POINT('',(129.116914,-111.208253,1.585)); +#150417 = LINE('',#150418,#150419); +#150418 = CARTESIAN_POINT('',(129.086507,-111.238661,1.585)); +#150419 = VECTOR('',#150420,1.); +#150420 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150421 = ORIENTED_EDGE('',*,*,#150422,.T.); +#150422 = EDGE_CURVE('',#150415,#150423,#150425,.T.); +#150423 = VERTEX_POINT('',#150424); +#150424 = CARTESIAN_POINT('',(129.116915,-110.868536,1.585)); +#150425 = CIRCLE('',#150426,0.305616146029); +#150426 = AXIS2_PLACEMENT_3D('',#150427,#150428,#150429); +#150427 = CARTESIAN_POINT('',(128.86284892049,-111.0383937521,1.585)); +#150428 = DIRECTION('',(0.,-0.,1.)); +#150429 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#150430 = ORIENTED_EDGE('',*,*,#150431,.T.); +#150431 = EDGE_CURVE('',#150423,#150432,#150434,.T.); +#150432 = VERTEX_POINT('',#150433); +#150433 = CARTESIAN_POINT('',(129.086508,-110.838129,1.585)); +#150434 = LINE('',#150435,#150436); +#150435 = CARTESIAN_POINT('',(129.116915,-110.868536,1.585)); +#150436 = VECTOR('',#150437,1.); +#150437 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#150438 = ORIENTED_EDGE('',*,*,#150439,.T.); +#150439 = EDGE_CURVE('',#150432,#150440,#150442,.T.); +#150440 = VERTEX_POINT('',#150441); +#150441 = CARTESIAN_POINT('',(129.017992,-110.803871,1.585)); +#150442 = LINE('',#150443,#150444); +#150443 = CARTESIAN_POINT('',(129.086508,-110.838129,1.585)); +#150444 = VECTOR('',#150445,1.); +#150445 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150446 = ORIENTED_EDGE('',*,*,#150447,.T.); +#150447 = EDGE_CURVE('',#150440,#150448,#150450,.T.); +#150448 = VERTEX_POINT('',#150449); +#150449 = CARTESIAN_POINT('',(128.878208,-110.80243,1.585)); +#150450 = LINE('',#150451,#150452); +#150451 = CARTESIAN_POINT('',(129.017992,-110.803871,1.585)); +#150452 = VECTOR('',#150453,1.); +#150453 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#150454 = ORIENTED_EDGE('',*,*,#150455,.T.); +#150455 = EDGE_CURVE('',#150448,#150456,#150458,.T.); +#150456 = VERTEX_POINT('',#150457); +#150457 = CARTESIAN_POINT('',(128.836397,-110.679483,1.585)); +#150458 = CIRCLE('',#150459,7.500015628756E-02); +#150459 = AXIS2_PLACEMENT_3D('',#150460,#150461,#150462); +#150460 = CARTESIAN_POINT('',(128.89284028432,-110.7288710461,1.585)); +#150461 = DIRECTION('',(0.,0.,-1.)); +#150462 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#150463 = ORIENTED_EDGE('',*,*,#150464,.T.); +#150464 = EDGE_CURVE('',#150456,#150465,#150467,.T.); +#150465 = VERTEX_POINT('',#150466); +#150466 = CARTESIAN_POINT('',(129.060891,-110.422919,1.585)); +#150467 = LINE('',#150468,#150469); +#150468 = CARTESIAN_POINT('',(128.836397,-110.679483,1.585)); +#150469 = VECTOR('',#150470,1.); +#150470 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#150471 = ORIENTED_EDGE('',*,*,#150472,.T.); +#150472 = EDGE_CURVE('',#150465,#150295,#150473,.T.); +#150473 = LINE('',#150474,#150475); +#150474 = CARTESIAN_POINT('',(129.060891,-110.422919,1.585)); +#150475 = VECTOR('',#150476,1.); +#150476 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#150477 = PLANE('',#150478); +#150478 = AXIS2_PLACEMENT_3D('',#150479,#150480,#150481); +#150479 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150480 = DIRECTION('',(0.,0.,1.)); +#150481 = DIRECTION('',(1.,0.,-0.)); +#150482 = SHELL_BASED_SURFACE_MODEL('',(#150483)); +#150483 = OPEN_SHELL('',(#150484)); +#150484 = ADVANCED_FACE('',(#150485),#150627,.T.); +#150485 = FACE_BOUND('',#150486,.F.); +#150486 = EDGE_LOOP('',(#150487,#150498,#150506,#150514,#150522,#150530, + #150538,#150546,#150554,#150563,#150571,#150580,#150588,#150596, + #150604,#150612,#150621)); +#150487 = ORIENTED_EDGE('',*,*,#150488,.T.); +#150488 = EDGE_CURVE('',#150489,#150491,#150493,.T.); +#150489 = VERTEX_POINT('',#150490); +#150490 = CARTESIAN_POINT('',(132.684506,-110.618892,1.585)); +#150491 = VERTEX_POINT('',#150492); +#150492 = CARTESIAN_POINT('',(132.801174,-110.681252,1.585)); +#150493 = CIRCLE('',#150494,7.500000000002E-02); +#150494 = AXIS2_PLACEMENT_3D('',#150495,#150496,#150497); +#150495 = CARTESIAN_POINT('',(132.726174,-110.6812520655,1.585)); +#150496 = DIRECTION('',(0.,0.,-1.)); +#150497 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#150498 = ORIENTED_EDGE('',*,*,#150499,.T.); +#150499 = EDGE_CURVE('',#150491,#150500,#150502,.T.); +#150500 = VERTEX_POINT('',#150501); +#150501 = CARTESIAN_POINT('',(132.801174,-111.187356,1.585)); +#150502 = LINE('',#150503,#150504); +#150503 = CARTESIAN_POINT('',(132.801174,-110.681252,1.585)); +#150504 = VECTOR('',#150505,1.); +#150505 = DIRECTION('',(0.,-1.,0.)); +#150506 = ORIENTED_EDGE('',*,*,#150507,.T.); +#150507 = EDGE_CURVE('',#150500,#150508,#150510,.T.); +#150508 = VERTEX_POINT('',#150509); +#150509 = CARTESIAN_POINT('',(132.829694,-111.244398,1.585)); +#150510 = LINE('',#150511,#150512); +#150511 = CARTESIAN_POINT('',(132.801174,-111.187356,1.585)); +#150512 = VECTOR('',#150513,1.); +#150513 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#150514 = ORIENTED_EDGE('',*,*,#150515,.T.); +#150515 = EDGE_CURVE('',#150508,#150516,#150518,.T.); +#150516 = VERTEX_POINT('',#150517); +#150517 = CARTESIAN_POINT('',(132.886736,-111.272919,1.585)); +#150518 = LINE('',#150519,#150520); +#150519 = CARTESIAN_POINT('',(132.829694,-111.244398,1.585)); +#150520 = VECTOR('',#150521,1.); +#150521 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#150522 = ORIENTED_EDGE('',*,*,#150523,.T.); +#150523 = EDGE_CURVE('',#150516,#150524,#150526,.T.); +#150524 = VERTEX_POINT('',#150525); +#150525 = CARTESIAN_POINT('',(132.994183,-111.272919,1.585)); +#150526 = LINE('',#150527,#150528); +#150527 = CARTESIAN_POINT('',(132.886736,-111.272919,1.585)); +#150528 = VECTOR('',#150529,1.); +#150529 = DIRECTION('',(1.,0.,0.)); +#150530 = ORIENTED_EDGE('',*,*,#150531,.T.); +#150531 = EDGE_CURVE('',#150524,#150532,#150534,.T.); +#150532 = VERTEX_POINT('',#150533); +#150533 = CARTESIAN_POINT('',(133.062698,-111.238661,1.585)); +#150534 = LINE('',#150535,#150536); +#150535 = CARTESIAN_POINT('',(132.994183,-111.272919,1.585)); +#150536 = VECTOR('',#150537,1.); +#150537 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#150538 = ORIENTED_EDGE('',*,*,#150539,.T.); +#150539 = EDGE_CURVE('',#150532,#150540,#150542,.T.); +#150540 = VERTEX_POINT('',#150541); +#150541 = CARTESIAN_POINT('',(133.079745,-111.221614,1.585)); +#150542 = LINE('',#150543,#150544); +#150543 = CARTESIAN_POINT('',(133.062698,-111.238661,1.585)); +#150544 = VECTOR('',#150545,1.); +#150545 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150546 = ORIENTED_EDGE('',*,*,#150547,.T.); +#150547 = EDGE_CURVE('',#150540,#150548,#150550,.T.); +#150548 = VERTEX_POINT('',#150549); +#150549 = CARTESIAN_POINT('',(133.081186,-110.66662,1.585)); +#150550 = LINE('',#150551,#150552); +#150551 = CARTESIAN_POINT('',(133.079745,-111.221614,1.585)); +#150552 = VECTOR('',#150553,1.); +#150553 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#150554 = ORIENTED_EDGE('',*,*,#150555,.T.); +#150555 = EDGE_CURVE('',#150548,#150556,#150558,.T.); +#150556 = VERTEX_POINT('',#150557); +#150557 = CARTESIAN_POINT('',(133.229745,-110.681252,1.585)); +#150558 = CIRCLE('',#150559,7.500006711464E-02); +#150559 = AXIS2_PLACEMENT_3D('',#150560,#150561,#150562); +#150560 = CARTESIAN_POINT('',(133.15474493288,-110.6812519328,1.585)); +#150561 = DIRECTION('',(0.,0.,-1.)); +#150562 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#150563 = ORIENTED_EDGE('',*,*,#150564,.T.); +#150564 = EDGE_CURVE('',#150556,#150565,#150567,.T.); +#150565 = VERTEX_POINT('',#150566); +#150566 = CARTESIAN_POINT('',(133.228304,-111.362551,1.585)); +#150567 = LINE('',#150568,#150569); +#150568 = CARTESIAN_POINT('',(133.229745,-110.681252,1.585)); +#150569 = VECTOR('',#150570,1.); +#150570 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#150571 = ORIENTED_EDGE('',*,*,#150572,.T.); +#150572 = EDGE_CURVE('',#150565,#150573,#150575,.T.); +#150573 = VERTEX_POINT('',#150574); +#150574 = CARTESIAN_POINT('',(133.093675,-111.390877,1.585)); +#150575 = CIRCLE('',#150576,7.47233536147E-02); +#150576 = AXIS2_PLACEMENT_3D('',#150577,#150578,#150579); +#150577 = CARTESIAN_POINT('',(133.15498058714,-111.3481545871,1.585)); +#150578 = DIRECTION('',(-0.,0.,-1.)); +#150579 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#150580 = ORIENTED_EDGE('',*,*,#150581,.T.); +#150581 = EDGE_CURVE('',#150573,#150582,#150584,.T.); +#150582 = VERTEX_POINT('',#150583); +#150583 = CARTESIAN_POINT('',(133.02652,-111.421478,1.585)); +#150584 = LINE('',#150585,#150586); +#150585 = CARTESIAN_POINT('',(133.093675,-111.390877,1.585)); +#150586 = VECTOR('',#150587,1.); +#150587 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#150588 = ORIENTED_EDGE('',*,*,#150589,.T.); +#150589 = EDGE_CURVE('',#150582,#150590,#150592,.T.); +#150590 = VERTEX_POINT('',#150591); +#150591 = CARTESIAN_POINT('',(132.849221,-111.420256,1.585)); +#150592 = LINE('',#150593,#150594); +#150593 = CARTESIAN_POINT('',(133.02652,-111.421478,1.585)); +#150594 = VECTOR('',#150595,1.); +#150595 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#150596 = ORIENTED_EDGE('',*,*,#150597,.T.); +#150597 = EDGE_CURVE('',#150590,#150598,#150600,.T.); +#150598 = VERTEX_POINT('',#150599); +#150599 = CARTESIAN_POINT('',(132.727809,-111.35955,1.585)); +#150600 = LINE('',#150601,#150602); +#150601 = CARTESIAN_POINT('',(132.849221,-111.420256,1.585)); +#150602 = VECTOR('',#150603,1.); +#150603 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150604 = ORIENTED_EDGE('',*,*,#150605,.T.); +#150605 = EDGE_CURVE('',#150598,#150606,#150608,.T.); +#150606 = VERTEX_POINT('',#150607); +#150607 = CARTESIAN_POINT('',(132.706711,-111.333841,1.585)); +#150608 = LINE('',#150609,#150610); +#150609 = CARTESIAN_POINT('',(132.727809,-111.35955,1.585)); +#150610 = VECTOR('',#150611,1.); +#150611 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#150612 = ORIENTED_EDGE('',*,*,#150613,.T.); +#150613 = EDGE_CURVE('',#150606,#150614,#150616,.T.); +#150614 = VERTEX_POINT('',#150615); +#150615 = CARTESIAN_POINT('',(132.663814,-110.639584,1.585)); +#150616 = CIRCLE('',#150617,0.780471555046); +#150617 = AXIS2_PLACEMENT_3D('',#150618,#150619,#150620); +#150618 = CARTESIAN_POINT('',(133.38262964714,-110.9436233291,1.585)); +#150619 = DIRECTION('',(0.,0.,-1.)); +#150620 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#150621 = ORIENTED_EDGE('',*,*,#150622,.T.); +#150622 = EDGE_CURVE('',#150614,#150489,#150623,.T.); +#150623 = LINE('',#150624,#150625); +#150624 = CARTESIAN_POINT('',(132.663814,-110.639584,1.585)); +#150625 = VECTOR('',#150626,1.); +#150626 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150627 = PLANE('',#150628); +#150628 = AXIS2_PLACEMENT_3D('',#150629,#150630,#150631); +#150629 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150630 = DIRECTION('',(0.,0.,1.)); +#150631 = DIRECTION('',(1.,0.,-0.)); +#150632 = SHELL_BASED_SURFACE_MODEL('',(#150633)); +#150633 = OPEN_SHELL('',(#150634)); +#150634 = ADVANCED_FACE('',(#150635),#150821,.T.); +#150635 = FACE_BOUND('',#150636,.F.); +#150636 = EDGE_LOOP('',(#150637,#150648,#150656,#150665,#150673,#150681, + #150690,#150698,#150707,#150715,#150723,#150731,#150740,#150748, + #150757,#150765,#150774,#150782,#150790,#150798,#150807,#150815)); +#150637 = ORIENTED_EDGE('',*,*,#150638,.T.); +#150638 = EDGE_CURVE('',#150639,#150641,#150643,.T.); +#150639 = VERTEX_POINT('',#150640); +#150640 = CARTESIAN_POINT('',(133.521066,-110.421478,1.585)); +#150641 = VERTEX_POINT('',#150642); +#150642 = CARTESIAN_POINT('',(133.535698,-110.272919,1.585)); +#150643 = CIRCLE('',#150644,7.500006711464E-02); +#150644 = AXIS2_PLACEMENT_3D('',#150645,#150646,#150647); +#150645 = CARTESIAN_POINT('',(133.53569793288,-110.3479190671,1.585)); +#150646 = DIRECTION('',(0.,0.,-1.)); +#150647 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#150648 = ORIENTED_EDGE('',*,*,#150649,.T.); +#150649 = EDGE_CURVE('',#150641,#150650,#150652,.T.); +#150650 = VERTEX_POINT('',#150651); +#150651 = CARTESIAN_POINT('',(134.162483,-110.273681,1.585)); +#150652 = LINE('',#150653,#150654); +#150653 = CARTESIAN_POINT('',(133.535698,-110.272919,1.585)); +#150654 = VECTOR('',#150655,1.); +#150655 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#150656 = ORIENTED_EDGE('',*,*,#150657,.T.); +#150657 = EDGE_CURVE('',#150650,#150658,#150660,.T.); +#150658 = VERTEX_POINT('',#150659); +#150659 = CARTESIAN_POINT('',(134.228304,-110.362551,1.585)); +#150660 = CIRCLE('',#150661,7.447391611627E-02); +#150661 = AXIS2_PLACEMENT_3D('',#150662,#150663,#150664); +#150662 = CARTESIAN_POINT('',(134.15530392664,-110.3478080874,1.585)); +#150663 = DIRECTION('',(0.,0.,-1.)); +#150664 = DIRECTION('',(9.639715124812E-02,0.995342950561,0.)); +#150665 = ORIENTED_EDGE('',*,*,#150666,.T.); +#150666 = EDGE_CURVE('',#150658,#150667,#150669,.T.); +#150667 = VERTEX_POINT('',#150668); +#150668 = CARTESIAN_POINT('',(134.211188,-110.397307,1.585)); +#150669 = LINE('',#150670,#150671); +#150670 = CARTESIAN_POINT('',(134.228304,-110.362551,1.585)); +#150671 = VECTOR('',#150672,1.); +#150672 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#150673 = ORIENTED_EDGE('',*,*,#150674,.T.); +#150674 = EDGE_CURVE('',#150667,#150675,#150677,.T.); +#150675 = VERTEX_POINT('',#150676); +#150676 = CARTESIAN_POINT('',(133.984292,-110.656616,1.585)); +#150677 = LINE('',#150678,#150679); +#150678 = CARTESIAN_POINT('',(134.211188,-110.397307,1.585)); +#150679 = VECTOR('',#150680,1.); +#150680 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#150681 = ORIENTED_EDGE('',*,*,#150682,.T.); +#150682 = EDGE_CURVE('',#150675,#150683,#150685,.T.); +#150683 = VERTEX_POINT('',#150684); +#150684 = CARTESIAN_POINT('',(134.228304,-110.904715,1.585)); +#150685 = CIRCLE('',#150686,0.348520834816); +#150686 = AXIS2_PLACEMENT_3D('',#150687,#150688,#150689); +#150687 = CARTESIAN_POINT('',(133.8909986174,-110.9924181993,1.585)); +#150688 = DIRECTION('',(0.,0.,-1.)); +#150689 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#150690 = ORIENTED_EDGE('',*,*,#150691,.T.); +#150691 = EDGE_CURVE('',#150683,#150692,#150694,.T.); +#150692 = VERTEX_POINT('',#150693); +#150693 = CARTESIAN_POINT('',(134.227082,-111.177252,1.585)); +#150694 = LINE('',#150695,#150696); +#150695 = CARTESIAN_POINT('',(134.228304,-110.904715,1.585)); +#150696 = VECTOR('',#150697,1.); +#150697 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#150698 = ORIENTED_EDGE('',*,*,#150699,.T.); +#150699 = EDGE_CURVE('',#150692,#150700,#150702,.T.); +#150700 = VERTEX_POINT('',#150701); +#150701 = CARTESIAN_POINT('',(133.978901,-111.421478,1.585)); +#150702 = CIRCLE('',#150703,0.348635327447); +#150703 = AXIS2_PLACEMENT_3D('',#150704,#150705,#150706); +#150704 = CARTESIAN_POINT('',(133.89112948129,-111.0840720841,1.585)); +#150705 = DIRECTION('',(0.,0.,-1.)); +#150706 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#150707 = ORIENTED_EDGE('',*,*,#150708,.T.); +#150708 = EDGE_CURVE('',#150700,#150709,#150711,.T.); +#150709 = VERTEX_POINT('',#150710); +#150710 = CARTESIAN_POINT('',(133.658745,-111.420256,1.585)); +#150711 = LINE('',#150712,#150713); +#150712 = CARTESIAN_POINT('',(133.978901,-111.421478,1.585)); +#150713 = VECTOR('',#150714,1.); +#150714 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#150715 = ORIENTED_EDGE('',*,*,#150716,.T.); +#150716 = EDGE_CURVE('',#150709,#150717,#150719,.T.); +#150717 = VERTEX_POINT('',#150718); +#150718 = CARTESIAN_POINT('',(133.536032,-111.35805,1.585)); +#150719 = LINE('',#150720,#150721); +#150720 = CARTESIAN_POINT('',(133.658745,-111.420256,1.585)); +#150721 = VECTOR('',#150722,1.); +#150722 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#150723 = ORIENTED_EDGE('',*,*,#150724,.T.); +#150724 = EDGE_CURVE('',#150717,#150725,#150727,.T.); +#150725 = VERTEX_POINT('',#150726); +#150726 = CARTESIAN_POINT('',(133.473337,-111.294347,1.585)); +#150727 = LINE('',#150728,#150729); +#150728 = CARTESIAN_POINT('',(133.536032,-111.35805,1.585)); +#150729 = VECTOR('',#150730,1.); +#150730 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#150731 = ORIENTED_EDGE('',*,*,#150732,.T.); +#150732 = EDGE_CURVE('',#150725,#150733,#150735,.T.); +#150733 = VERTEX_POINT('',#150734); +#150734 = CARTESIAN_POINT('',(133.588732,-111.199648,1.585)); +#150735 = CIRCLE('',#150736,7.50001266804E-02); +#150736 = AXIS2_PLACEMENT_3D('',#150737,#150738,#150739); +#150737 = CARTESIAN_POINT('',(133.53569805199,-111.2526802483,1.585)); +#150738 = DIRECTION('',(0.,0.,-1.)); +#150739 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#150740 = ORIENTED_EDGE('',*,*,#150741,.T.); +#150741 = EDGE_CURVE('',#150733,#150742,#150744,.T.); +#150742 = VERTEX_POINT('',#150743); +#150743 = CARTESIAN_POINT('',(133.627744,-111.238661,1.585)); +#150744 = LINE('',#150745,#150746); +#150745 = CARTESIAN_POINT('',(133.588732,-111.199648,1.585)); +#150746 = VECTOR('',#150747,1.); +#150747 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#150748 = ORIENTED_EDGE('',*,*,#150749,.T.); +#150749 = EDGE_CURVE('',#150742,#150750,#150752,.T.); +#150750 = VERTEX_POINT('',#150751); +#150751 = CARTESIAN_POINT('',(134.015079,-111.238661,1.585)); +#150752 = CIRCLE('',#150753,0.358502380266); +#150753 = AXIS2_PLACEMENT_3D('',#150754,#150755,#150756); +#150754 = CARTESIAN_POINT('',(133.8214115,-110.936971,1.585)); +#150755 = DIRECTION('',(0.,0.,1.)); +#150756 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#150757 = ORIENTED_EDGE('',*,*,#150758,.T.); +#150758 = EDGE_CURVE('',#150750,#150759,#150761,.T.); +#150759 = VERTEX_POINT('',#150760); +#150760 = CARTESIAN_POINT('',(134.045486,-111.208253,1.585)); +#150761 = LINE('',#150762,#150763); +#150762 = CARTESIAN_POINT('',(134.015079,-111.238661,1.585)); +#150763 = VECTOR('',#150764,1.); +#150764 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150765 = ORIENTED_EDGE('',*,*,#150766,.T.); +#150766 = EDGE_CURVE('',#150759,#150767,#150769,.T.); +#150767 = VERTEX_POINT('',#150768); +#150768 = CARTESIAN_POINT('',(134.045487,-110.868536,1.585)); +#150769 = CIRCLE('',#150770,0.305616146029); +#150770 = AXIS2_PLACEMENT_3D('',#150771,#150772,#150773); +#150771 = CARTESIAN_POINT('',(133.79142092049,-111.0383937521,1.585)); +#150772 = DIRECTION('',(0.,-0.,1.)); +#150773 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#150774 = ORIENTED_EDGE('',*,*,#150775,.T.); +#150775 = EDGE_CURVE('',#150767,#150776,#150778,.T.); +#150776 = VERTEX_POINT('',#150777); +#150777 = CARTESIAN_POINT('',(134.01508,-110.838129,1.585)); +#150778 = LINE('',#150779,#150780); +#150779 = CARTESIAN_POINT('',(134.045487,-110.868536,1.585)); +#150780 = VECTOR('',#150781,1.); +#150781 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#150782 = ORIENTED_EDGE('',*,*,#150783,.T.); +#150783 = EDGE_CURVE('',#150776,#150784,#150786,.T.); +#150784 = VERTEX_POINT('',#150785); +#150785 = CARTESIAN_POINT('',(133.946564,-110.803871,1.585)); +#150786 = LINE('',#150787,#150788); +#150787 = CARTESIAN_POINT('',(134.01508,-110.838129,1.585)); +#150788 = VECTOR('',#150789,1.); +#150789 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150790 = ORIENTED_EDGE('',*,*,#150791,.T.); +#150791 = EDGE_CURVE('',#150784,#150792,#150794,.T.); +#150792 = VERTEX_POINT('',#150793); +#150793 = CARTESIAN_POINT('',(133.80678,-110.80243,1.585)); +#150794 = LINE('',#150795,#150796); +#150795 = CARTESIAN_POINT('',(133.946564,-110.803871,1.585)); +#150796 = VECTOR('',#150797,1.); +#150797 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#150798 = ORIENTED_EDGE('',*,*,#150799,.T.); +#150799 = EDGE_CURVE('',#150792,#150800,#150802,.T.); +#150800 = VERTEX_POINT('',#150801); +#150801 = CARTESIAN_POINT('',(133.764969,-110.679483,1.585)); +#150802 = CIRCLE('',#150803,7.500015628756E-02); +#150803 = AXIS2_PLACEMENT_3D('',#150804,#150805,#150806); +#150804 = CARTESIAN_POINT('',(133.82141228432,-110.7288710461,1.585)); +#150805 = DIRECTION('',(0.,0.,-1.)); +#150806 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#150807 = ORIENTED_EDGE('',*,*,#150808,.T.); +#150808 = EDGE_CURVE('',#150800,#150809,#150811,.T.); +#150809 = VERTEX_POINT('',#150810); +#150810 = CARTESIAN_POINT('',(133.989463,-110.422919,1.585)); +#150811 = LINE('',#150812,#150813); +#150812 = CARTESIAN_POINT('',(133.764969,-110.679483,1.585)); +#150813 = VECTOR('',#150814,1.); +#150814 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#150815 = ORIENTED_EDGE('',*,*,#150816,.T.); +#150816 = EDGE_CURVE('',#150809,#150639,#150817,.T.); +#150817 = LINE('',#150818,#150819); +#150818 = CARTESIAN_POINT('',(133.989463,-110.422919,1.585)); +#150819 = VECTOR('',#150820,1.); +#150820 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#150821 = PLANE('',#150822); +#150822 = AXIS2_PLACEMENT_3D('',#150823,#150824,#150825); +#150823 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150824 = DIRECTION('',(0.,0.,1.)); +#150825 = DIRECTION('',(1.,0.,-0.)); +#150826 = SHELL_BASED_SURFACE_MODEL('',(#150827)); +#150827 = OPEN_SHELL('',(#150828)); +#150828 = ADVANCED_FACE('',(#150829),#150971,.T.); +#150829 = FACE_BOUND('',#150830,.F.); +#150830 = EDGE_LOOP('',(#150831,#150842,#150850,#150858,#150866,#150874, + #150882,#150890,#150898,#150907,#150915,#150924,#150932,#150940, + #150948,#150956,#150965)); +#150831 = ORIENTED_EDGE('',*,*,#150832,.T.); +#150832 = EDGE_CURVE('',#150833,#150835,#150837,.T.); +#150833 = VERTEX_POINT('',#150834); +#150834 = CARTESIAN_POINT('',(136.684506,-110.618892,1.585)); +#150835 = VERTEX_POINT('',#150836); +#150836 = CARTESIAN_POINT('',(136.801174,-110.681252,1.585)); +#150837 = CIRCLE('',#150838,7.500000000002E-02); +#150838 = AXIS2_PLACEMENT_3D('',#150839,#150840,#150841); +#150839 = CARTESIAN_POINT('',(136.726174,-110.6812520655,1.585)); +#150840 = DIRECTION('',(0.,0.,-1.)); +#150841 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#150842 = ORIENTED_EDGE('',*,*,#150843,.T.); +#150843 = EDGE_CURVE('',#150835,#150844,#150846,.T.); +#150844 = VERTEX_POINT('',#150845); +#150845 = CARTESIAN_POINT('',(136.801174,-111.187356,1.585)); +#150846 = LINE('',#150847,#150848); +#150847 = CARTESIAN_POINT('',(136.801174,-110.681252,1.585)); +#150848 = VECTOR('',#150849,1.); +#150849 = DIRECTION('',(0.,-1.,0.)); +#150850 = ORIENTED_EDGE('',*,*,#150851,.T.); +#150851 = EDGE_CURVE('',#150844,#150852,#150854,.T.); +#150852 = VERTEX_POINT('',#150853); +#150853 = CARTESIAN_POINT('',(136.829694,-111.244398,1.585)); +#150854 = LINE('',#150855,#150856); +#150855 = CARTESIAN_POINT('',(136.801174,-111.187356,1.585)); +#150856 = VECTOR('',#150857,1.); +#150857 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#150858 = ORIENTED_EDGE('',*,*,#150859,.T.); +#150859 = EDGE_CURVE('',#150852,#150860,#150862,.T.); +#150860 = VERTEX_POINT('',#150861); +#150861 = CARTESIAN_POINT('',(136.886736,-111.272919,1.585)); +#150862 = LINE('',#150863,#150864); +#150863 = CARTESIAN_POINT('',(136.829694,-111.244398,1.585)); +#150864 = VECTOR('',#150865,1.); +#150865 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#150866 = ORIENTED_EDGE('',*,*,#150867,.T.); +#150867 = EDGE_CURVE('',#150860,#150868,#150870,.T.); +#150868 = VERTEX_POINT('',#150869); +#150869 = CARTESIAN_POINT('',(136.994183,-111.272919,1.585)); +#150870 = LINE('',#150871,#150872); +#150871 = CARTESIAN_POINT('',(136.886736,-111.272919,1.585)); +#150872 = VECTOR('',#150873,1.); +#150873 = DIRECTION('',(1.,0.,0.)); +#150874 = ORIENTED_EDGE('',*,*,#150875,.T.); +#150875 = EDGE_CURVE('',#150868,#150876,#150878,.T.); +#150876 = VERTEX_POINT('',#150877); +#150877 = CARTESIAN_POINT('',(137.062698,-111.238661,1.585)); +#150878 = LINE('',#150879,#150880); +#150879 = CARTESIAN_POINT('',(136.994183,-111.272919,1.585)); +#150880 = VECTOR('',#150881,1.); +#150881 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#150882 = ORIENTED_EDGE('',*,*,#150883,.T.); +#150883 = EDGE_CURVE('',#150876,#150884,#150886,.T.); +#150884 = VERTEX_POINT('',#150885); +#150885 = CARTESIAN_POINT('',(137.079745,-111.221614,1.585)); +#150886 = LINE('',#150887,#150888); +#150887 = CARTESIAN_POINT('',(137.062698,-111.238661,1.585)); +#150888 = VECTOR('',#150889,1.); +#150889 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150890 = ORIENTED_EDGE('',*,*,#150891,.T.); +#150891 = EDGE_CURVE('',#150884,#150892,#150894,.T.); +#150892 = VERTEX_POINT('',#150893); +#150893 = CARTESIAN_POINT('',(137.081186,-110.66662,1.585)); +#150894 = LINE('',#150895,#150896); +#150895 = CARTESIAN_POINT('',(137.079745,-111.221614,1.585)); +#150896 = VECTOR('',#150897,1.); +#150897 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#150898 = ORIENTED_EDGE('',*,*,#150899,.T.); +#150899 = EDGE_CURVE('',#150892,#150900,#150902,.T.); +#150900 = VERTEX_POINT('',#150901); +#150901 = CARTESIAN_POINT('',(137.229745,-110.681252,1.585)); +#150902 = CIRCLE('',#150903,7.500006711464E-02); +#150903 = AXIS2_PLACEMENT_3D('',#150904,#150905,#150906); +#150904 = CARTESIAN_POINT('',(137.15474493288,-110.6812519328,1.585)); +#150905 = DIRECTION('',(0.,0.,-1.)); +#150906 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#150907 = ORIENTED_EDGE('',*,*,#150908,.T.); +#150908 = EDGE_CURVE('',#150900,#150909,#150911,.T.); +#150909 = VERTEX_POINT('',#150910); +#150910 = CARTESIAN_POINT('',(137.228304,-111.362551,1.585)); +#150911 = LINE('',#150912,#150913); +#150912 = CARTESIAN_POINT('',(137.229745,-110.681252,1.585)); +#150913 = VECTOR('',#150914,1.); +#150914 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#150915 = ORIENTED_EDGE('',*,*,#150916,.T.); +#150916 = EDGE_CURVE('',#150909,#150917,#150919,.T.); +#150917 = VERTEX_POINT('',#150918); +#150918 = CARTESIAN_POINT('',(137.093675,-111.390877,1.585)); +#150919 = CIRCLE('',#150920,7.47233536147E-02); +#150920 = AXIS2_PLACEMENT_3D('',#150921,#150922,#150923); +#150921 = CARTESIAN_POINT('',(137.15498058714,-111.3481545871,1.585)); +#150922 = DIRECTION('',(-0.,0.,-1.)); +#150923 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#150924 = ORIENTED_EDGE('',*,*,#150925,.T.); +#150925 = EDGE_CURVE('',#150917,#150926,#150928,.T.); +#150926 = VERTEX_POINT('',#150927); +#150927 = CARTESIAN_POINT('',(137.02652,-111.421478,1.585)); +#150928 = LINE('',#150929,#150930); +#150929 = CARTESIAN_POINT('',(137.093675,-111.390877,1.585)); +#150930 = VECTOR('',#150931,1.); +#150931 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#150932 = ORIENTED_EDGE('',*,*,#150933,.T.); +#150933 = EDGE_CURVE('',#150926,#150934,#150936,.T.); +#150934 = VERTEX_POINT('',#150935); +#150935 = CARTESIAN_POINT('',(136.849221,-111.420256,1.585)); +#150936 = LINE('',#150937,#150938); +#150937 = CARTESIAN_POINT('',(137.02652,-111.421478,1.585)); +#150938 = VECTOR('',#150939,1.); +#150939 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#150940 = ORIENTED_EDGE('',*,*,#150941,.T.); +#150941 = EDGE_CURVE('',#150934,#150942,#150944,.T.); +#150942 = VERTEX_POINT('',#150943); +#150943 = CARTESIAN_POINT('',(136.727809,-111.35955,1.585)); +#150944 = LINE('',#150945,#150946); +#150945 = CARTESIAN_POINT('',(136.849221,-111.420256,1.585)); +#150946 = VECTOR('',#150947,1.); +#150947 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150948 = ORIENTED_EDGE('',*,*,#150949,.T.); +#150949 = EDGE_CURVE('',#150942,#150950,#150952,.T.); +#150950 = VERTEX_POINT('',#150951); +#150951 = CARTESIAN_POINT('',(136.706711,-111.333841,1.585)); +#150952 = LINE('',#150953,#150954); +#150953 = CARTESIAN_POINT('',(136.727809,-111.35955,1.585)); +#150954 = VECTOR('',#150955,1.); +#150955 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#150956 = ORIENTED_EDGE('',*,*,#150957,.T.); +#150957 = EDGE_CURVE('',#150950,#150958,#150960,.T.); +#150958 = VERTEX_POINT('',#150959); +#150959 = CARTESIAN_POINT('',(136.663814,-110.639584,1.585)); +#150960 = CIRCLE('',#150961,0.780471555046); +#150961 = AXIS2_PLACEMENT_3D('',#150962,#150963,#150964); +#150962 = CARTESIAN_POINT('',(137.38262964714,-110.9436233291,1.585)); +#150963 = DIRECTION('',(0.,0.,-1.)); +#150964 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#150965 = ORIENTED_EDGE('',*,*,#150966,.T.); +#150966 = EDGE_CURVE('',#150958,#150833,#150967,.T.); +#150967 = LINE('',#150968,#150969); +#150968 = CARTESIAN_POINT('',(136.663814,-110.639584,1.585)); +#150969 = VECTOR('',#150970,1.); +#150970 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150971 = PLANE('',#150972); +#150972 = AXIS2_PLACEMENT_3D('',#150973,#150974,#150975); +#150973 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150974 = DIRECTION('',(0.,0.,1.)); +#150975 = DIRECTION('',(1.,0.,-0.)); +#150976 = SHELL_BASED_SURFACE_MODEL('',(#150977)); +#150977 = OPEN_SHELL('',(#150978)); +#150978 = ADVANCED_FACE('',(#150979),#151114,.T.); +#150979 = FACE_BOUND('',#150980,.F.); +#150980 = EDGE_LOOP('',(#150981,#150992,#151000,#151008,#151016,#151025, + #151033,#151041,#151050,#151058,#151066,#151075,#151083,#151091, + #151100,#151108)); +#150981 = ORIENTED_EDGE('',*,*,#150982,.T.); +#150982 = EDGE_CURVE('',#150983,#150985,#150987,.T.); +#150983 = VERTEX_POINT('',#150984); +#150984 = CARTESIAN_POINT('',(137.775429,-110.241051,1.585)); +#150985 = VERTEX_POINT('',#150986); +#150986 = CARTESIAN_POINT('',(137.892563,-110.324018,1.585)); +#150987 = CIRCLE('',#150988,7.499955990671E-02); +#150988 = AXIS2_PLACEMENT_3D('',#150989,#150990,#150991); +#150989 = CARTESIAN_POINT('',(137.82141250095,-110.3003000643,1.585)); +#150990 = DIRECTION('',(0.,0.,-1.)); +#150991 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#150992 = ORIENTED_EDGE('',*,*,#150993,.T.); +#150993 = EDGE_CURVE('',#150985,#150994,#150996,.T.); +#150994 = VERTEX_POINT('',#150995); +#150995 = CARTESIAN_POINT('',(137.687374,-110.939585,1.585)); +#150996 = LINE('',#150997,#150998); +#150997 = CARTESIAN_POINT('',(137.892563,-110.324018,1.585)); +#150998 = VECTOR('',#150999,1.); +#150999 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#151000 = ORIENTED_EDGE('',*,*,#151001,.T.); +#151001 = EDGE_CURVE('',#150994,#151002,#151004,.T.); +#151002 = VERTEX_POINT('',#151003); +#151003 = CARTESIAN_POINT('',(137.984507,-110.939585,1.585)); +#151004 = LINE('',#151005,#151006); +#151005 = CARTESIAN_POINT('',(137.687374,-110.939585,1.585)); +#151006 = VECTOR('',#151007,1.); +#151007 = DIRECTION('',(1.,0.,0.)); +#151008 = ORIENTED_EDGE('',*,*,#151009,.T.); +#151009 = EDGE_CURVE('',#151002,#151010,#151012,.T.); +#151010 = VERTEX_POINT('',#151011); +#151011 = CARTESIAN_POINT('',(137.985948,-110.66662,1.585)); +#151012 = LINE('',#151013,#151014); +#151013 = CARTESIAN_POINT('',(137.984507,-110.939585,1.585)); +#151014 = VECTOR('',#151015,1.); +#151015 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#151016 = ORIENTED_EDGE('',*,*,#151017,.T.); +#151017 = EDGE_CURVE('',#151010,#151018,#151020,.T.); +#151018 = VERTEX_POINT('',#151019); +#151019 = CARTESIAN_POINT('',(138.134507,-110.681252,1.585)); +#151020 = CIRCLE('',#151021,7.500006711465E-02); +#151021 = AXIS2_PLACEMENT_3D('',#151022,#151023,#151024); +#151022 = CARTESIAN_POINT('',(138.05950693288,-110.6812519328,1.585)); +#151023 = DIRECTION('',(0.,0.,-1.)); +#151024 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#151025 = ORIENTED_EDGE('',*,*,#151026,.T.); +#151026 = EDGE_CURVE('',#151018,#151027,#151029,.T.); +#151027 = VERTEX_POINT('',#151028); +#151028 = CARTESIAN_POINT('',(138.134507,-110.939585,1.585)); +#151029 = LINE('',#151030,#151031); +#151030 = CARTESIAN_POINT('',(138.134507,-110.681252,1.585)); +#151031 = VECTOR('',#151032,1.); +#151032 = DIRECTION('',(0.,-1.,0.)); +#151033 = ORIENTED_EDGE('',*,*,#151034,.T.); +#151034 = EDGE_CURVE('',#151027,#151035,#151037,.T.); +#151035 = VERTEX_POINT('',#151036); +#151036 = CARTESIAN_POINT('',(138.216996,-110.941026,1.585)); +#151037 = LINE('',#151038,#151039); +#151038 = CARTESIAN_POINT('',(138.134507,-110.939585,1.585)); +#151039 = VECTOR('',#151040,1.); +#151040 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#151041 = ORIENTED_EDGE('',*,*,#151042,.T.); +#151042 = EDGE_CURVE('',#151035,#151043,#151045,.T.); +#151043 = VERTEX_POINT('',#151044); +#151044 = CARTESIAN_POINT('',(138.202364,-111.089585,1.585)); +#151045 = CIRCLE('',#151046,7.500006711464E-02); +#151046 = AXIS2_PLACEMENT_3D('',#151047,#151048,#151049); +#151047 = CARTESIAN_POINT('',(138.20236406711,-111.0145849328,1.585)); +#151048 = DIRECTION('',(0.,0.,-1.)); +#151049 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#151050 = ORIENTED_EDGE('',*,*,#151051,.T.); +#151051 = EDGE_CURVE('',#151043,#151052,#151054,.T.); +#151052 = VERTEX_POINT('',#151053); +#151053 = CARTESIAN_POINT('',(138.134507,-111.089585,1.585)); +#151054 = LINE('',#151055,#151056); +#151055 = CARTESIAN_POINT('',(138.202364,-111.089585,1.585)); +#151056 = VECTOR('',#151057,1.); +#151057 = DIRECTION('',(-1.,0.,0.)); +#151058 = ORIENTED_EDGE('',*,*,#151059,.T.); +#151059 = EDGE_CURVE('',#151052,#151060,#151062,.T.); +#151060 = VERTEX_POINT('',#151061); +#151061 = CARTESIAN_POINT('',(138.133066,-111.362551,1.585)); +#151062 = LINE('',#151063,#151064); +#151063 = CARTESIAN_POINT('',(138.134507,-111.089585,1.585)); +#151064 = VECTOR('',#151065,1.); +#151065 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#151066 = ORIENTED_EDGE('',*,*,#151067,.T.); +#151067 = EDGE_CURVE('',#151060,#151068,#151070,.T.); +#151068 = VERTEX_POINT('',#151069); +#151069 = CARTESIAN_POINT('',(137.984507,-111.347919,1.585)); +#151070 = CIRCLE('',#151071,7.500006711464E-02); +#151071 = AXIS2_PLACEMENT_3D('',#151072,#151073,#151074); +#151072 = CARTESIAN_POINT('',(138.05950706711,-111.3479190671,1.585)); +#151073 = DIRECTION('',(-0.,0.,-1.)); +#151074 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#151075 = ORIENTED_EDGE('',*,*,#151076,.T.); +#151076 = EDGE_CURVE('',#151068,#151077,#151079,.T.); +#151077 = VERTEX_POINT('',#151078); +#151078 = CARTESIAN_POINT('',(137.984507,-111.089585,1.585)); +#151079 = LINE('',#151080,#151081); +#151080 = CARTESIAN_POINT('',(137.984507,-111.347919,1.585)); +#151081 = VECTOR('',#151082,1.); +#151082 = DIRECTION('',(0.,1.,0.)); +#151083 = ORIENTED_EDGE('',*,*,#151084,.T.); +#151084 = EDGE_CURVE('',#151077,#151085,#151087,.T.); +#151085 = VERTEX_POINT('',#151086); +#151086 = CARTESIAN_POINT('',(137.568685,-111.088144,1.585)); +#151087 = LINE('',#151088,#151089); +#151088 = CARTESIAN_POINT('',(137.984507,-111.089585,1.585)); +#151089 = VECTOR('',#151090,1.); +#151090 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#151091 = ORIENTED_EDGE('',*,*,#151092,.T.); +#151092 = EDGE_CURVE('',#151085,#151093,#151095,.T.); +#151093 = VERTEX_POINT('',#151094); +#151094 = CARTESIAN_POINT('',(137.512166,-110.990868,1.585)); +#151095 = CIRCLE('',#151096,7.499997045039E-02); +#151096 = AXIS2_PLACEMENT_3D('',#151097,#151098,#151099); +#151097 = CARTESIAN_POINT('',(137.58331717257,-111.0145852133,1.585)); +#151098 = DIRECTION('',(0.,0.,-1.)); +#151099 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#151100 = ORIENTED_EDGE('',*,*,#151101,.T.); +#151101 = EDGE_CURVE('',#151093,#151102,#151104,.T.); +#151102 = VERTEX_POINT('',#151103); +#151103 = CARTESIAN_POINT('',(137.756255,-110.263158,1.585)); +#151104 = LINE('',#151105,#151106); +#151105 = CARTESIAN_POINT('',(137.512166,-110.990868,1.585)); +#151106 = VECTOR('',#151107,1.); +#151107 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#151108 = ORIENTED_EDGE('',*,*,#151109,.T.); +#151109 = EDGE_CURVE('',#151102,#150983,#151110,.T.); +#151110 = LINE('',#151111,#151112); +#151111 = CARTESIAN_POINT('',(137.756255,-110.263158,1.585)); +#151112 = VECTOR('',#151113,1.); +#151113 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#151114 = PLANE('',#151115); +#151115 = AXIS2_PLACEMENT_3D('',#151116,#151117,#151118); +#151116 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151117 = DIRECTION('',(0.,0.,1.)); +#151118 = DIRECTION('',(1.,0.,-0.)); +#151119 = SHELL_BASED_SURFACE_MODEL('',(#151120)); +#151120 = OPEN_SHELL('',(#151121)); +#151121 = ADVANCED_FACE('',(#151122),#151320,.T.); +#151122 = FACE_BOUND('',#151123,.F.); +#151123 = EDGE_LOOP('',(#151124,#151135,#151143,#151152,#151160,#151169, + #151177,#151186,#151194,#151202,#151210,#151218,#151226,#151234, + #151242,#151250,#151258,#151266,#151274,#151282,#151290,#151298, + #151306,#151314)); +#151124 = ORIENTED_EDGE('',*,*,#151125,.T.); +#151125 = EDGE_CURVE('',#151126,#151128,#151130,.T.); +#151126 = VERTEX_POINT('',#151127); +#151127 = CARTESIAN_POINT('',(131.831888,-110.330381,1.585)); +#151128 = VERTEX_POINT('',#151129); +#151129 = CARTESIAN_POINT('',(132.291651,-110.333178,1.585)); +#151130 = CIRCLE('',#151131,0.460785175821); +#151131 = AXIS2_PLACEMENT_3D('',#151132,#151133,#151134); +#151132 = CARTESIAN_POINT('',(132.05934010897,-110.7311159702,1.585)); +#151133 = DIRECTION('',(0.,0.,-1.)); +#151134 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#151135 = ORIENTED_EDGE('',*,*,#151136,.T.); +#151136 = EDGE_CURVE('',#151128,#151137,#151139,.T.); +#151137 = VERTEX_POINT('',#151138); +#151138 = CARTESIAN_POINT('',(132.359962,-110.401489,1.585)); +#151139 = LINE('',#151140,#151141); +#151140 = CARTESIAN_POINT('',(132.291651,-110.333178,1.585)); +#151141 = VECTOR('',#151142,1.); +#151142 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#151143 = ORIENTED_EDGE('',*,*,#151144,.T.); +#151144 = EDGE_CURVE('',#151137,#151145,#151147,.T.); +#151145 = VERTEX_POINT('',#151146); +#151146 = CARTESIAN_POINT('',(132.244569,-110.49619,1.585)); +#151147 = CIRCLE('',#151148,7.500003178655E-02); +#151148 = AXIS2_PLACEMENT_3D('',#151149,#151150,#151151); +#151149 = CARTESIAN_POINT('',(132.29760156212,-110.4431565,1.585)); +#151150 = DIRECTION('',(0.,0.,-1.)); +#151151 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#151152 = ORIENTED_EDGE('',*,*,#151153,.T.); +#151153 = EDGE_CURVE('',#151145,#151154,#151156,.T.); +#151154 = VERTEX_POINT('',#151155); +#151155 = CARTESIAN_POINT('',(132.209469,-110.46109,1.585)); +#151156 = LINE('',#151157,#151158); +#151157 = CARTESIAN_POINT('',(132.244569,-110.49619,1.585)); +#151158 = VECTOR('',#151159,1.); +#151159 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#151160 = ORIENTED_EDGE('',*,*,#151161,.T.); +#151161 = EDGE_CURVE('',#151154,#151162,#151164,.T.); +#151162 = VERTEX_POINT('',#151163); +#151163 = CARTESIAN_POINT('',(131.909545,-110.46109,1.585)); +#151164 = CIRCLE('',#151165,0.299308637371); +#151165 = AXIS2_PLACEMENT_3D('',#151166,#151167,#151168); +#151166 = CARTESIAN_POINT('',(132.059507,-110.720121,1.585)); +#151167 = DIRECTION('',(0.,0.,1.)); +#151168 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#151169 = ORIENTED_EDGE('',*,*,#151170,.T.); +#151170 = EDGE_CURVE('',#151162,#151171,#151173,.T.); +#151171 = VERTEX_POINT('',#151172); +#151172 = CARTESIAN_POINT('',(131.835432,-110.535203,1.585)); +#151173 = LINE('',#151174,#151175); +#151174 = CARTESIAN_POINT('',(131.909545,-110.46109,1.585)); +#151175 = VECTOR('',#151176,1.); +#151176 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#151177 = ORIENTED_EDGE('',*,*,#151178,.T.); +#151178 = EDGE_CURVE('',#151171,#151179,#151181,.T.); +#151179 = VERTEX_POINT('',#151180); +#151180 = CARTESIAN_POINT('',(131.753555,-110.910113,1.585)); +#151181 = CIRCLE('',#151182,0.611712714363); +#151182 = AXIS2_PLACEMENT_3D('',#151183,#151184,#151185); +#151183 = CARTESIAN_POINT('',(132.36196027521,-110.8465876822,1.585)); +#151184 = DIRECTION('',(0.,0.,1.)); +#151185 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#151186 = ORIENTED_EDGE('',*,*,#151187,.T.); +#151187 = EDGE_CURVE('',#151179,#151188,#151190,.T.); +#151188 = VERTEX_POINT('',#151189); +#151189 = CARTESIAN_POINT('',(131.796938,-111.083647,1.585)); +#151190 = LINE('',#151191,#151192); +#151191 = CARTESIAN_POINT('',(131.753555,-110.910113,1.585)); +#151192 = VECTOR('',#151193,1.); +#151193 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#151194 = ORIENTED_EDGE('',*,*,#151195,.T.); +#151195 = EDGE_CURVE('',#151188,#151196,#151198,.T.); +#151196 = VERTEX_POINT('',#151197); +#151197 = CARTESIAN_POINT('',(131.835432,-111.160634,1.585)); +#151198 = LINE('',#151199,#151200); +#151199 = CARTESIAN_POINT('',(131.796938,-111.083647,1.585)); +#151200 = VECTOR('',#151201,1.); +#151201 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#151202 = ORIENTED_EDGE('',*,*,#151203,.T.); +#151203 = EDGE_CURVE('',#151196,#151204,#151206,.T.); +#151204 = VERTEX_POINT('',#151205); +#151205 = CARTESIAN_POINT('',(131.909545,-111.234748,1.585)); +#151206 = LINE('',#151207,#151208); +#151207 = CARTESIAN_POINT('',(131.835432,-111.160634,1.585)); +#151208 = VECTOR('',#151209,1.); +#151209 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#151210 = ORIENTED_EDGE('',*,*,#151211,.T.); +#151211 = EDGE_CURVE('',#151204,#151212,#151214,.T.); +#151212 = VERTEX_POINT('',#151213); +#151213 = CARTESIAN_POINT('',(132.003943,-111.266214,1.585)); +#151214 = LINE('',#151215,#151216); +#151215 = CARTESIAN_POINT('',(131.909545,-111.234748,1.585)); +#151216 = VECTOR('',#151217,1.); +#151217 = DIRECTION('',(0.94868329805,-0.316227766017,0.)); +#151218 = ORIENTED_EDGE('',*,*,#151219,.T.); +#151219 = EDGE_CURVE('',#151212,#151220,#151222,.T.); +#151220 = VERTEX_POINT('',#151221); +#151221 = CARTESIAN_POINT('',(131.994532,-111.288936,1.585)); +#151222 = LINE('',#151223,#151224); +#151223 = CARTESIAN_POINT('',(132.003943,-111.266214,1.585)); +#151224 = VECTOR('',#151225,1.); +#151225 = DIRECTION('',(-0.382657036063,-0.923890465776,0.)); +#151226 = ORIENTED_EDGE('',*,*,#151227,.T.); +#151227 = EDGE_CURVE('',#151220,#151228,#151230,.T.); +#151228 = VERTEX_POINT('',#151229); +#151229 = CARTESIAN_POINT('',(131.994532,-111.347464,1.585)); +#151230 = LINE('',#151231,#151232); +#151231 = CARTESIAN_POINT('',(131.994532,-111.288936,1.585)); +#151232 = VECTOR('',#151233,1.); +#151233 = DIRECTION('',(0.,-1.,0.)); +#151234 = ORIENTED_EDGE('',*,*,#151235,.T.); +#151235 = EDGE_CURVE('',#151228,#151236,#151238,.T.); +#151236 = VERTEX_POINT('',#151237); +#151237 = CARTESIAN_POINT('',(132.01693,-111.401536,1.585)); +#151238 = LINE('',#151239,#151240); +#151239 = CARTESIAN_POINT('',(131.994532,-111.347464,1.585)); +#151240 = VECTOR('',#151241,1.); +#151241 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#151242 = ORIENTED_EDGE('',*,*,#151243,.T.); +#151243 = EDGE_CURVE('',#151236,#151244,#151246,.T.); +#151244 = VERTEX_POINT('',#151245); +#151245 = CARTESIAN_POINT('',(132.036621,-111.421227,1.585)); +#151246 = LINE('',#151247,#151248); +#151247 = CARTESIAN_POINT('',(132.01693,-111.401536,1.585)); +#151248 = VECTOR('',#151249,1.); +#151249 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#151250 = ORIENTED_EDGE('',*,*,#151251,.T.); +#151251 = EDGE_CURVE('',#151244,#151252,#151254,.T.); +#151252 = VERTEX_POINT('',#151253); +#151253 = CARTESIAN_POINT('',(131.995425,-111.420719,1.585)); +#151254 = LINE('',#151255,#151256); +#151255 = CARTESIAN_POINT('',(132.036621,-111.421227,1.585)); +#151256 = VECTOR('',#151257,1.); +#151257 = DIRECTION('',(-0.99992397826,1.233035685389E-02,0.)); +#151258 = ORIENTED_EDGE('',*,*,#151259,.T.); +#151259 = EDGE_CURVE('',#151252,#151260,#151262,.T.); +#151260 = VERTEX_POINT('',#151261); +#151261 = CARTESIAN_POINT('',(131.827363,-111.362661,1.585)); +#151262 = LINE('',#151263,#151264); +#151263 = CARTESIAN_POINT('',(131.995425,-111.420719,1.585)); +#151264 = VECTOR('',#151265,1.); +#151265 = DIRECTION('',(-0.945189826766,0.32652134904,0.)); +#151266 = ORIENTED_EDGE('',*,*,#151267,.T.); +#151267 = EDGE_CURVE('',#151260,#151268,#151270,.T.); +#151268 = VERTEX_POINT('',#151269); +#151269 = CARTESIAN_POINT('',(131.710674,-111.244898,1.585)); +#151270 = LINE('',#151271,#151272); +#151271 = CARTESIAN_POINT('',(131.827363,-111.362661,1.585)); +#151272 = VECTOR('',#151273,1.); +#151273 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#151274 = ORIENTED_EDGE('',*,*,#151275,.T.); +#151275 = EDGE_CURVE('',#151268,#151276,#151278,.T.); +#151276 = VERTEX_POINT('',#151277); +#151277 = CARTESIAN_POINT('',(131.653413,-111.128013,1.585)); +#151278 = LINE('',#151279,#151280); +#151279 = CARTESIAN_POINT('',(131.710674,-111.244898,1.585)); +#151280 = VECTOR('',#151281,1.); +#151281 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#151282 = ORIENTED_EDGE('',*,*,#151283,.T.); +#151283 = EDGE_CURVE('',#151276,#151284,#151286,.T.); +#151284 = VERTEX_POINT('',#151285); +#151285 = CARTESIAN_POINT('',(131.603555,-110.919347,1.585)); +#151286 = LINE('',#151287,#151288); +#151287 = CARTESIAN_POINT('',(131.653413,-111.128013,1.585)); +#151288 = VECTOR('',#151289,1.); +#151289 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#151290 = ORIENTED_EDGE('',*,*,#151291,.T.); +#151291 = EDGE_CURVE('',#151284,#151292,#151294,.T.); +#151292 = VERTEX_POINT('',#151293); +#151293 = CARTESIAN_POINT('',(131.605794,-110.7583,1.585)); +#151294 = LINE('',#151295,#151296); +#151295 = CARTESIAN_POINT('',(131.603555,-110.919347,1.585)); +#151296 = VECTOR('',#151297,1.); +#151297 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#151298 = ORIENTED_EDGE('',*,*,#151299,.T.); +#151299 = EDGE_CURVE('',#151292,#151300,#151302,.T.); +#151300 = VERTEX_POINT('',#151301); +#151301 = CARTESIAN_POINT('',(131.659092,-110.552473,1.585)); +#151302 = LINE('',#151303,#151304); +#151303 = CARTESIAN_POINT('',(131.605794,-110.7583,1.585)); +#151304 = VECTOR('',#151305,1.); +#151305 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#151306 = ORIENTED_EDGE('',*,*,#151307,.T.); +#151307 = EDGE_CURVE('',#151300,#151308,#151310,.T.); +#151308 = VERTEX_POINT('',#151309); +#151309 = CARTESIAN_POINT('',(131.716041,-110.443492,1.585)); +#151310 = LINE('',#151311,#151312); +#151311 = CARTESIAN_POINT('',(131.659092,-110.552473,1.585)); +#151312 = VECTOR('',#151313,1.); +#151313 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#151314 = ORIENTED_EDGE('',*,*,#151315,.T.); +#151315 = EDGE_CURVE('',#151308,#151126,#151316,.T.); +#151316 = LINE('',#151317,#151318); +#151317 = CARTESIAN_POINT('',(131.716041,-110.443492,1.585)); +#151318 = VECTOR('',#151319,1.); +#151319 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#151320 = PLANE('',#151321); +#151321 = AXIS2_PLACEMENT_3D('',#151322,#151323,#151324); +#151322 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151323 = DIRECTION('',(0.,0.,1.)); +#151324 = DIRECTION('',(1.,0.,-0.)); +#151325 = SHELL_BASED_SURFACE_MODEL('',(#151326)); +#151326 = OPEN_SHELL('',(#151327)); +#151327 = ADVANCED_FACE('',(#151328),#151395,.T.); +#151328 = FACE_BOUND('',#151329,.F.); +#151329 = EDGE_LOOP('',(#151330,#151341,#151349,#151357,#151365,#151373, + #151381,#151389)); +#151330 = ORIENTED_EDGE('',*,*,#151331,.T.); +#151331 = EDGE_CURVE('',#151332,#151334,#151336,.T.); +#151332 = VERTEX_POINT('',#151333); +#151333 = CARTESIAN_POINT('',(132.255934,-111.19032,1.585)); +#151334 = VERTEX_POINT('',#151335); +#151335 = CARTESIAN_POINT('',(132.350635,-111.305713,1.585)); +#151336 = CIRCLE('',#151337,7.499993690113E-02); +#151337 = AXIS2_PLACEMENT_3D('',#151338,#151339,#151340); +#151338 = CARTESIAN_POINT('',(132.2976022483,-111.2526798237,1.585)); +#151339 = DIRECTION('',(0.,0.,-1.)); +#151340 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#151341 = ORIENTED_EDGE('',*,*,#151342,.T.); +#151342 = EDGE_CURVE('',#151334,#151343,#151345,.T.); +#151343 = VERTEX_POINT('',#151344); +#151344 = CARTESIAN_POINT('',(132.287125,-111.365457,1.585)); +#151345 = LINE('',#151346,#151347); +#151346 = CARTESIAN_POINT('',(132.350635,-111.305713,1.585)); +#151347 = VECTOR('',#151348,1.); +#151348 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#151349 = ORIENTED_EDGE('',*,*,#151350,.T.); +#151350 = EDGE_CURVE('',#151343,#151351,#151353,.T.); +#151351 = VERTEX_POINT('',#151352); +#151352 = CARTESIAN_POINT('',(132.280399,-111.367667,1.585)); +#151353 = LINE('',#151354,#151355); +#151354 = CARTESIAN_POINT('',(132.287125,-111.365457,1.585)); +#151355 = VECTOR('',#151356,1.); +#151356 = DIRECTION('',(-0.950030552242,-0.312156931377,0.)); +#151357 = ORIENTED_EDGE('',*,*,#151358,.T.); +#151358 = EDGE_CURVE('',#151351,#151359,#151361,.T.); +#151359 = VERTEX_POINT('',#151360); +#151360 = CARTESIAN_POINT('',(132.288768,-111.347464,1.585)); +#151361 = LINE('',#151362,#151363); +#151362 = CARTESIAN_POINT('',(132.280399,-111.367667,1.585)); +#151363 = VECTOR('',#151364,1.); +#151364 = DIRECTION('',(0.382708545648,0.923869129849,0.)); +#151365 = ORIENTED_EDGE('',*,*,#151366,.T.); +#151366 = EDGE_CURVE('',#151359,#151367,#151369,.T.); +#151367 = VERTEX_POINT('',#151368); +#151368 = CARTESIAN_POINT('',(132.288768,-111.288936,1.585)); +#151369 = LINE('',#151370,#151371); +#151370 = CARTESIAN_POINT('',(132.288768,-111.347464,1.585)); +#151371 = VECTOR('',#151372,1.); +#151372 = DIRECTION('',(0.,1.,0.)); +#151373 = ORIENTED_EDGE('',*,*,#151374,.T.); +#151374 = EDGE_CURVE('',#151367,#151375,#151377,.T.); +#151375 = VERTEX_POINT('',#151376); +#151376 = CARTESIAN_POINT('',(132.26637,-111.234864,1.585)); +#151377 = LINE('',#151378,#151379); +#151378 = CARTESIAN_POINT('',(132.288768,-111.288936,1.585)); +#151379 = VECTOR('',#151380,1.); +#151380 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#151381 = ORIENTED_EDGE('',*,*,#151382,.T.); +#151382 = EDGE_CURVE('',#151375,#151383,#151385,.T.); +#151383 = VERTEX_POINT('',#151384); +#151384 = CARTESIAN_POINT('',(132.238497,-111.206991,1.585)); +#151385 = LINE('',#151386,#151387); +#151386 = CARTESIAN_POINT('',(132.26637,-111.234864,1.585)); +#151387 = VECTOR('',#151388,1.); +#151388 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#151389 = ORIENTED_EDGE('',*,*,#151390,.T.); +#151390 = EDGE_CURVE('',#151383,#151332,#151391,.T.); +#151391 = LINE('',#151392,#151393); +#151392 = CARTESIAN_POINT('',(132.238497,-111.206991,1.585)); +#151393 = VECTOR('',#151394,1.); +#151394 = DIRECTION('',(0.722804782077,0.691052275162,0.)); +#151395 = PLANE('',#151396); +#151396 = AXIS2_PLACEMENT_3D('',#151397,#151398,#151399); +#151397 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151398 = DIRECTION('',(0.,0.,1.)); +#151399 = DIRECTION('',(1.,0.,-0.)); +#151400 = SHELL_BASED_SURFACE_MODEL('',(#151401)); +#151401 = OPEN_SHELL('',(#151402)); +#151402 = ADVANCED_FACE('',(#151403),#151439,.T.); +#151403 = FACE_BOUND('',#151404,.F.); +#151404 = EDGE_LOOP('',(#151405,#151416,#151424,#151433)); +#151405 = ORIENTED_EDGE('',*,*,#151406,.T.); +#151406 = EDGE_CURVE('',#151407,#151409,#151411,.T.); +#151407 = VERTEX_POINT('',#151408); +#151408 = CARTESIAN_POINT('',(179.279392,-111.3606,1.585)); +#151409 = VERTEX_POINT('',#151410); +#151410 = CARTESIAN_POINT('',(179.279392,-111.2406,1.585)); +#151411 = CIRCLE('',#151412,6.000000000043E-02); +#151412 = AXIS2_PLACEMENT_3D('',#151413,#151414,#151415); +#151413 = CARTESIAN_POINT('',(179.27939177441,-111.3006,1.585)); +#151414 = DIRECTION('',(0.,0.,-1.)); +#151415 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#151416 = ORIENTED_EDGE('',*,*,#151417,.T.); +#151417 = EDGE_CURVE('',#151409,#151418,#151420,.T.); +#151418 = VERTEX_POINT('',#151419); +#151419 = CARTESIAN_POINT('',(179.753908,-111.2406,1.585)); +#151420 = LINE('',#151421,#151422); +#151421 = CARTESIAN_POINT('',(179.279392,-111.2406,1.585)); +#151422 = VECTOR('',#151423,1.); +#151423 = DIRECTION('',(1.,0.,0.)); +#151424 = ORIENTED_EDGE('',*,*,#151425,.T.); +#151425 = EDGE_CURVE('',#151418,#151426,#151428,.T.); +#151426 = VERTEX_POINT('',#151427); +#151427 = CARTESIAN_POINT('',(179.753908,-111.3606,1.585)); +#151428 = CIRCLE('',#151429,6.000000000042E-02); +#151429 = AXIS2_PLACEMENT_3D('',#151430,#151431,#151432); +#151430 = CARTESIAN_POINT('',(179.75390822558,-111.3006,1.585)); +#151431 = DIRECTION('',(0.,0.,-1.)); +#151432 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#151433 = ORIENTED_EDGE('',*,*,#151434,.T.); +#151434 = EDGE_CURVE('',#151426,#151407,#151435,.T.); +#151435 = LINE('',#151436,#151437); +#151436 = CARTESIAN_POINT('',(179.753908,-111.3606,1.585)); +#151437 = VECTOR('',#151438,1.); +#151438 = DIRECTION('',(-1.,0.,0.)); +#151439 = PLANE('',#151440); +#151440 = AXIS2_PLACEMENT_3D('',#151441,#151442,#151443); +#151441 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151442 = DIRECTION('',(0.,0.,1.)); +#151443 = DIRECTION('',(1.,0.,-0.)); +#151444 = SHELL_BASED_SURFACE_MODEL('',(#151445)); +#151445 = OPEN_SHELL('',(#151446)); +#151446 = ADVANCED_FACE('',(#151447,#151549),#151617,.T.); +#151447 = FACE_BOUND('',#151448,.F.); +#151448 = EDGE_LOOP('',(#151449,#151460,#151468,#151476,#151485,#151493, + #151501,#151509,#151518,#151526,#151534,#151543)); +#151449 = ORIENTED_EDGE('',*,*,#151450,.T.); +#151450 = EDGE_CURVE('',#151451,#151453,#151455,.T.); +#151451 = VERTEX_POINT('',#151452); +#151452 = CARTESIAN_POINT('',(180.230028,-110.351919,1.585)); +#151453 = VERTEX_POINT('',#151454); +#151454 = CARTESIAN_POINT('',(180.478209,-110.107693,1.585)); +#151455 = CIRCLE('',#151456,0.348621382901); +#151456 = AXIS2_PLACEMENT_3D('',#151457,#151458,#151459); +#151457 = CARTESIAN_POINT('',(180.56596922951,-110.4450874438,1.585)); +#151458 = DIRECTION('',(0.,0.,-1.)); +#151459 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#151460 = ORIENTED_EDGE('',*,*,#151461,.T.); +#151461 = EDGE_CURVE('',#151453,#151462,#151464,.T.); +#151462 = VERTEX_POINT('',#151463); +#151463 = CARTESIAN_POINT('',(180.697949,-110.107693,1.585)); +#151464 = LINE('',#151465,#151466); +#151465 = CARTESIAN_POINT('',(180.478209,-110.107693,1.585)); +#151466 = VECTOR('',#151467,1.); +#151467 = DIRECTION('',(1.,0.,0.)); +#151468 = ORIENTED_EDGE('',*,*,#151469,.T.); +#151469 = EDGE_CURVE('',#151462,#151470,#151472,.T.); +#151470 = VERTEX_POINT('',#151471); +#151471 = CARTESIAN_POINT('',(180.733358,-110.12242,1.585)); +#151472 = LINE('',#151473,#151474); +#151473 = CARTESIAN_POINT('',(180.697949,-110.107693,1.585)); +#151474 = VECTOR('',#151475,1.); +#151475 = DIRECTION('',(0.923324376396,-0.3840209577,0.)); +#151476 = ORIENTED_EDGE('',*,*,#151477,.T.); +#151477 = EDGE_CURVE('',#151470,#151478,#151480,.T.); +#151478 = VERTEX_POINT('',#151479); +#151479 = CARTESIAN_POINT('',(180.820223,-110.118892,1.585)); +#151480 = CIRCLE('',#151481,7.226854941615E-02); +#151481 = AXIS2_PLACEMENT_3D('',#151482,#151483,#151484); +#151482 = CARTESIAN_POINT('',(180.77913343241,-110.1783427415,1.585)); +#151483 = DIRECTION('',(0.,0.,-1.)); +#151484 = DIRECTION('',(-0.633407378233,0.773818514382,0.)); +#151485 = ORIENTED_EDGE('',*,*,#151486,.T.); +#151486 = EDGE_CURVE('',#151478,#151487,#151489,.T.); +#151487 = VERTEX_POINT('',#151488); +#151488 = CARTESIAN_POINT('',(180.840915,-110.139584,1.585)); +#151489 = LINE('',#151490,#151491); +#151490 = CARTESIAN_POINT('',(180.820223,-110.118892,1.585)); +#151491 = VECTOR('',#151492,1.); +#151492 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#151493 = ORIENTED_EDGE('',*,*,#151494,.T.); +#151494 = EDGE_CURVE('',#151487,#151495,#151497,.T.); +#151495 = VERTEX_POINT('',#151496); +#151496 = CARTESIAN_POINT('',(180.853555,-110.181252,1.585)); +#151497 = LINE('',#151498,#151499); +#151498 = CARTESIAN_POINT('',(180.840915,-110.139584,1.585)); +#151499 = VECTOR('',#151500,1.); +#151500 = DIRECTION('',(0.29028783999,-0.956939376321,0.)); +#151501 = ORIENTED_EDGE('',*,*,#151502,.T.); +#151502 = EDGE_CURVE('',#151495,#151503,#151505,.T.); +#151503 = VERTEX_POINT('',#151504); +#151504 = CARTESIAN_POINT('',(180.852114,-111.195884,1.585)); +#151505 = LINE('',#151506,#151507); +#151506 = CARTESIAN_POINT('',(180.853555,-110.181252,1.585)); +#151507 = VECTOR('',#151508,1.); +#151508 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#151509 = ORIENTED_EDGE('',*,*,#151510,.T.); +#151510 = EDGE_CURVE('',#151503,#151511,#151513,.T.); +#151511 = VERTEX_POINT('',#151512); +#151512 = CARTESIAN_POINT('',(180.703555,-111.181252,1.585)); +#151513 = CIRCLE('',#151514,7.500006711465E-02); +#151514 = AXIS2_PLACEMENT_3D('',#151515,#151516,#151517); +#151515 = CARTESIAN_POINT('',(180.77855506711,-111.1812520671,1.585)); +#151516 = DIRECTION('',(-0.,0.,-1.)); +#151517 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#151518 = ORIENTED_EDGE('',*,*,#151519,.T.); +#151519 = EDGE_CURVE('',#151511,#151520,#151522,.T.); +#151520 = VERTEX_POINT('',#151521); +#151521 = CARTESIAN_POINT('',(180.703126,-110.920256,1.585)); +#151522 = LINE('',#151523,#151524); +#151523 = CARTESIAN_POINT('',(180.703555,-111.181252,1.585)); +#151524 = VECTOR('',#151525,1.); +#151525 = DIRECTION('',(-1.643701131322E-03,0.999998649122,0.)); +#151526 = ORIENTED_EDGE('',*,*,#151527,.T.); +#151527 = EDGE_CURVE('',#151520,#151528,#151530,.T.); +#151528 = VERTEX_POINT('',#151529); +#151529 = CARTESIAN_POINT('',(180.473031,-110.920256,1.585)); +#151530 = LINE('',#151531,#151532); +#151531 = CARTESIAN_POINT('',(180.703126,-110.920256,1.585)); +#151532 = VECTOR('',#151533,1.); +#151533 = DIRECTION('',(-1.,0.,0.)); +#151534 = ORIENTED_EDGE('',*,*,#151535,.T.); +#151535 = EDGE_CURVE('',#151528,#151536,#151538,.T.); +#151536 = VERTEX_POINT('',#151537); +#151537 = CARTESIAN_POINT('',(180.228806,-110.672074,1.585)); +#151538 = CIRCLE('',#151539,0.348628446662); +#151539 = AXIS2_PLACEMENT_3D('',#151540,#151541,#151542); +#151540 = CARTESIAN_POINT('',(180.56620661322,-110.5843094284,1.585)); +#151541 = DIRECTION('',(0.,0.,-1.)); +#151542 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#151543 = ORIENTED_EDGE('',*,*,#151544,.T.); +#151544 = EDGE_CURVE('',#151536,#151451,#151545,.T.); +#151545 = LINE('',#151546,#151547); +#151546 = CARTESIAN_POINT('',(180.228806,-110.672074,1.585)); +#151547 = VECTOR('',#151548,1.); +#151548 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#151549 = FACE_BOUND('',#151550,.F.); +#151550 = EDGE_LOOP('',(#151551,#151561,#151569,#151578,#151586,#151595, + #151603,#151611)); +#151551 = ORIENTED_EDGE('',*,*,#151552,.T.); +#151552 = EDGE_CURVE('',#151553,#151555,#151557,.T.); +#151553 = VERTEX_POINT('',#151554); +#151554 = CARTESIAN_POINT('',(180.703555,-110.275223,1.585)); +#151555 = VERTEX_POINT('',#151556); +#151556 = CARTESIAN_POINT('',(180.665612,-110.256252,1.585)); +#151557 = LINE('',#151558,#151559); +#151558 = CARTESIAN_POINT('',(180.703555,-110.275223,1.585)); +#151559 = VECTOR('',#151560,1.); +#151560 = DIRECTION('',(-0.894431905558,0.447204166259,0.)); +#151561 = ORIENTED_EDGE('',*,*,#151562,.T.); +#151562 = EDGE_CURVE('',#151555,#151563,#151565,.T.); +#151563 = VERTEX_POINT('',#151564); +#151564 = CARTESIAN_POINT('',(180.510546,-110.256252,1.585)); +#151565 = LINE('',#151566,#151567); +#151566 = CARTESIAN_POINT('',(180.665612,-110.256252,1.585)); +#151567 = VECTOR('',#151568,1.); +#151568 = DIRECTION('',(-1.,0.,0.)); +#151569 = ORIENTED_EDGE('',*,*,#151570,.T.); +#151570 = EDGE_CURVE('',#151563,#151571,#151573,.T.); +#151571 = VERTEX_POINT('',#151572); +#151572 = CARTESIAN_POINT('',(180.377365,-110.389433,1.585)); +#151573 = CIRCLE('',#151574,0.18686440374); +#151574 = AXIS2_PLACEMENT_3D('',#151575,#151576,#151577); +#151575 = CARTESIAN_POINT('',(180.558082,-110.436969,1.585)); +#151576 = DIRECTION('',(0.,0.,1.)); +#151577 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#151578 = ORIENTED_EDGE('',*,*,#151579,.T.); +#151579 = EDGE_CURVE('',#151571,#151580,#151582,.T.); +#151580 = VERTEX_POINT('',#151581); +#151581 = CARTESIAN_POINT('',(180.377365,-110.639737,1.585)); +#151582 = LINE('',#151583,#151584); +#151583 = CARTESIAN_POINT('',(180.377365,-110.389433,1.585)); +#151584 = VECTOR('',#151585,1.); +#151585 = DIRECTION('',(0.,-1.,0.)); +#151586 = ORIENTED_EDGE('',*,*,#151587,.T.); +#151587 = EDGE_CURVE('',#151580,#151588,#151590,.T.); +#151588 = VERTEX_POINT('',#151589); +#151589 = CARTESIAN_POINT('',(180.510546,-110.772919,1.585)); +#151590 = CIRCLE('',#151591,0.186867373533); +#151591 = AXIS2_PLACEMENT_3D('',#151592,#151593,#151594); +#151592 = CARTESIAN_POINT('',(180.55808471388,-110.592199643,1.585)); +#151593 = DIRECTION('',(0.,0.,1.)); +#151594 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#151595 = ORIENTED_EDGE('',*,*,#151596,.T.); +#151596 = EDGE_CURVE('',#151588,#151597,#151599,.T.); +#151597 = VERTEX_POINT('',#151598); +#151598 = CARTESIAN_POINT('',(180.665612,-110.772919,1.585)); +#151599 = LINE('',#151600,#151601); +#151600 = CARTESIAN_POINT('',(180.510546,-110.772919,1.585)); +#151601 = VECTOR('',#151602,1.); +#151602 = DIRECTION('',(1.,0.,0.)); +#151603 = ORIENTED_EDGE('',*,*,#151604,.T.); +#151604 = EDGE_CURVE('',#151597,#151605,#151607,.T.); +#151605 = VERTEX_POINT('',#151606); +#151606 = CARTESIAN_POINT('',(180.703555,-110.753947,1.585)); +#151607 = LINE('',#151608,#151609); +#151608 = CARTESIAN_POINT('',(180.665612,-110.772919,1.585)); +#151609 = VECTOR('',#151610,1.); +#151610 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#151611 = ORIENTED_EDGE('',*,*,#151612,.T.); +#151612 = EDGE_CURVE('',#151605,#151553,#151613,.T.); +#151613 = LINE('',#151614,#151615); +#151614 = CARTESIAN_POINT('',(180.703555,-110.753947,1.585)); +#151615 = VECTOR('',#151616,1.); +#151616 = DIRECTION('',(0.,1.,0.)); +#151617 = PLANE('',#151618); +#151618 = AXIS2_PLACEMENT_3D('',#151619,#151620,#151621); +#151619 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151620 = DIRECTION('',(0.,0.,1.)); +#151621 = DIRECTION('',(1.,0.,-0.)); +#151622 = SHELL_BASED_SURFACE_MODEL('',(#151623)); +#151623 = OPEN_SHELL('',(#151624)); +#151624 = ADVANCED_FACE('',(#151625),#151694,.T.); +#151625 = FACE_BOUND('',#151626,.F.); +#151626 = EDGE_LOOP('',(#151627,#151638,#151646,#151654,#151663,#151671, + #151680,#151688)); +#151627 = ORIENTED_EDGE('',*,*,#151628,.T.); +#151628 = EDGE_CURVE('',#151629,#151631,#151633,.T.); +#151629 = VERTEX_POINT('',#151630); +#151630 = CARTESIAN_POINT('',(207.386217,-109.900139,1.585)); +#151631 = VERTEX_POINT('',#151632); +#151632 = CARTESIAN_POINT('',(207.50165,-109.9231,1.585)); +#151633 = CIRCLE('',#151634,6.000007318649E-02); +#151634 = AXIS2_PLACEMENT_3D('',#151635,#151636,#151637); +#151635 = CARTESIAN_POINT('',(207.44164992681,-109.9230998233,1.585)); +#151636 = DIRECTION('',(0.,0.,-1.)); +#151637 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#151638 = ORIENTED_EDGE('',*,*,#151639,.T.); +#151639 = EDGE_CURVE('',#151631,#151640,#151642,.T.); +#151640 = VERTEX_POINT('',#151641); +#151641 = CARTESIAN_POINT('',(207.50165,-111.1131,1.585)); +#151642 = LINE('',#151643,#151644); +#151643 = CARTESIAN_POINT('',(207.50165,-109.9231,1.585)); +#151644 = VECTOR('',#151645,1.); +#151645 = DIRECTION('',(0.,-1.,0.)); +#151646 = ORIENTED_EDGE('',*,*,#151647,.T.); +#151647 = EDGE_CURVE('',#151640,#151648,#151650,.T.); +#151648 = VERTEX_POINT('',#151649); +#151649 = CARTESIAN_POINT('',(208.69165,-111.1131,1.585)); +#151650 = LINE('',#151651,#151652); +#151651 = CARTESIAN_POINT('',(207.50165,-111.1131,1.585)); +#151652 = VECTOR('',#151653,1.); +#151653 = DIRECTION('',(1.,0.,0.)); +#151654 = ORIENTED_EDGE('',*,*,#151655,.T.); +#151655 = EDGE_CURVE('',#151648,#151656,#151658,.T.); +#151656 = VERTEX_POINT('',#151657); +#151657 = CARTESIAN_POINT('',(208.69165,-111.2331,1.585)); +#151658 = CIRCLE('',#151659,6.000000000042E-02); +#151659 = AXIS2_PLACEMENT_3D('',#151660,#151661,#151662); +#151660 = CARTESIAN_POINT('',(208.69165022558,-111.1731,1.585)); +#151661 = DIRECTION('',(0.,0.,-1.)); +#151662 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#151663 = ORIENTED_EDGE('',*,*,#151664,.T.); +#151664 = EDGE_CURVE('',#151656,#151665,#151667,.T.); +#151665 = VERTEX_POINT('',#151666); +#151666 = CARTESIAN_POINT('',(207.44165,-111.2331,1.585)); +#151667 = LINE('',#151668,#151669); +#151668 = CARTESIAN_POINT('',(208.69165,-111.2331,1.585)); +#151669 = VECTOR('',#151670,1.); +#151670 = DIRECTION('',(-1.,0.,0.)); +#151671 = ORIENTED_EDGE('',*,*,#151672,.T.); +#151672 = EDGE_CURVE('',#151665,#151673,#151675,.T.); +#151673 = VERTEX_POINT('',#151674); +#151674 = CARTESIAN_POINT('',(207.38165,-111.1731,1.585)); +#151675 = CIRCLE('',#151676,5.999932016257E-02); +#151676 = AXIS2_PLACEMENT_3D('',#151677,#151678,#151679); +#151677 = CARTESIAN_POINT('',(207.44164932015,-111.1731006798,1.585)); +#151678 = DIRECTION('',(0.,0.,-1.)); +#151679 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#151680 = ORIENTED_EDGE('',*,*,#151681,.T.); +#151681 = EDGE_CURVE('',#151673,#151682,#151684,.T.); +#151682 = VERTEX_POINT('',#151683); +#151683 = CARTESIAN_POINT('',(207.38165,-109.9231,1.585)); +#151684 = LINE('',#151685,#151686); +#151685 = CARTESIAN_POINT('',(207.38165,-111.1731,1.585)); +#151686 = VECTOR('',#151687,1.); +#151687 = DIRECTION('',(0.,1.,0.)); +#151688 = ORIENTED_EDGE('',*,*,#151689,.T.); +#151689 = EDGE_CURVE('',#151682,#151629,#151690,.T.); +#151690 = LINE('',#151691,#151692); +#151691 = CARTESIAN_POINT('',(207.38165,-109.9231,1.585)); +#151692 = VECTOR('',#151693,1.); +#151693 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#151694 = PLANE('',#151695); +#151695 = AXIS2_PLACEMENT_3D('',#151696,#151697,#151698); +#151696 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151697 = DIRECTION('',(0.,0.,1.)); +#151698 = DIRECTION('',(1.,0.,-0.)); +#151699 = SHELL_BASED_SURFACE_MODEL('',(#151700)); +#151700 = OPEN_SHELL('',(#151701)); +#151701 = ADVANCED_FACE('',(#151702,#151772,#151956,#152040,#152074, + #152108),#152142,.T.); +#151702 = FACE_BOUND('',#151703,.F.); +#151703 = EDGE_LOOP('',(#151704,#151715,#151723,#151732,#151740,#151749, + #151757,#151766)); +#151704 = ORIENTED_EDGE('',*,*,#151705,.T.); +#151705 = EDGE_CURVE('',#151706,#151708,#151710,.T.); +#151706 = VERTEX_POINT('',#151707); +#151707 = CARTESIAN_POINT('',(207.67165,-100.7631,1.585)); +#151708 = VERTEX_POINT('',#151709); +#151709 = CARTESIAN_POINT('',(207.73165,-100.7031,1.585)); +#151710 = CIRCLE('',#151711,5.999932016262E-02); +#151711 = AXIS2_PLACEMENT_3D('',#151712,#151713,#151714); +#151712 = CARTESIAN_POINT('',(207.73164932015,-100.7630993201,1.585)); +#151713 = DIRECTION('',(0.,0.,-1.)); +#151714 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#151715 = ORIENTED_EDGE('',*,*,#151716,.T.); +#151716 = EDGE_CURVE('',#151708,#151717,#151719,.T.); +#151717 = VERTEX_POINT('',#151718); +#151718 = CARTESIAN_POINT('',(213.70165,-100.7031,1.585)); +#151719 = LINE('',#151720,#151721); +#151720 = CARTESIAN_POINT('',(207.73165,-100.7031,1.585)); +#151721 = VECTOR('',#151722,1.); +#151722 = DIRECTION('',(1.,0.,0.)); +#151723 = ORIENTED_EDGE('',*,*,#151724,.T.); +#151724 = EDGE_CURVE('',#151717,#151725,#151727,.T.); +#151725 = VERTEX_POINT('',#151726); +#151726 = CARTESIAN_POINT('',(213.76165,-100.7631,1.585)); +#151727 = CIRCLE('',#151728,5.999932016257E-02); +#151728 = AXIS2_PLACEMENT_3D('',#151729,#151730,#151731); +#151729 = CARTESIAN_POINT('',(213.70165067984,-100.7630993201,1.585)); +#151730 = DIRECTION('',(0.,0.,-1.)); +#151731 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#151732 = ORIENTED_EDGE('',*,*,#151733,.T.); +#151733 = EDGE_CURVE('',#151725,#151734,#151736,.T.); +#151734 = VERTEX_POINT('',#151735); +#151735 = CARTESIAN_POINT('',(213.76165,-110.8831,1.585)); +#151736 = LINE('',#151737,#151738); +#151737 = CARTESIAN_POINT('',(213.76165,-100.7631,1.585)); +#151738 = VECTOR('',#151739,1.); +#151739 = DIRECTION('',(0.,-1.,0.)); +#151740 = ORIENTED_EDGE('',*,*,#151741,.T.); +#151741 = EDGE_CURVE('',#151734,#151742,#151744,.T.); +#151742 = VERTEX_POINT('',#151743); +#151743 = CARTESIAN_POINT('',(213.70165,-110.9431,1.585)); +#151744 = CIRCLE('',#151745,5.999932016265E-02); +#151745 = AXIS2_PLACEMENT_3D('',#151746,#151747,#151748); +#151746 = CARTESIAN_POINT('',(213.70165067984,-110.8831006798,1.585)); +#151747 = DIRECTION('',(0.,0.,-1.)); +#151748 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#151749 = ORIENTED_EDGE('',*,*,#151750,.T.); +#151750 = EDGE_CURVE('',#151742,#151751,#151753,.T.); +#151751 = VERTEX_POINT('',#151752); +#151752 = CARTESIAN_POINT('',(207.73165,-110.9431,1.585)); +#151753 = LINE('',#151754,#151755); +#151754 = CARTESIAN_POINT('',(213.70165,-110.9431,1.585)); +#151755 = VECTOR('',#151756,1.); +#151756 = DIRECTION('',(-1.,0.,0.)); +#151757 = ORIENTED_EDGE('',*,*,#151758,.T.); +#151758 = EDGE_CURVE('',#151751,#151759,#151761,.T.); +#151759 = VERTEX_POINT('',#151760); +#151760 = CARTESIAN_POINT('',(207.67165,-110.8831,1.585)); +#151761 = CIRCLE('',#151762,5.999932016256E-02); +#151762 = AXIS2_PLACEMENT_3D('',#151763,#151764,#151765); +#151763 = CARTESIAN_POINT('',(207.73164932015,-110.8831006798,1.585)); +#151764 = DIRECTION('',(0.,0.,-1.)); +#151765 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#151766 = ORIENTED_EDGE('',*,*,#151767,.T.); +#151767 = EDGE_CURVE('',#151759,#151706,#151768,.T.); +#151768 = LINE('',#151769,#151770); +#151769 = CARTESIAN_POINT('',(207.67165,-110.8831,1.585)); +#151770 = VECTOR('',#151771,1.); +#151771 = DIRECTION('',(0.,1.,0.)); +#151772 = FACE_BOUND('',#151773,.F.); +#151773 = EDGE_LOOP('',(#151774,#151785,#151793,#151801,#151809,#151818, + #151826,#151834,#151842,#151851,#151859,#151868,#151876,#151884, + #151892,#151901,#151909,#151917,#151925,#151934,#151942,#151950)); +#151774 = ORIENTED_EDGE('',*,*,#151775,.T.); +#151775 = EDGE_CURVE('',#151776,#151778,#151780,.T.); +#151776 = VERTEX_POINT('',#151777); +#151777 = CARTESIAN_POINT('',(209.99165,-101.5831,1.585)); +#151778 = VERTEX_POINT('',#151779); +#151779 = CARTESIAN_POINT('',(209.93165,-101.5231,1.585)); +#151780 = CIRCLE('',#151781,5.999932016264E-02); +#151781 = AXIS2_PLACEMENT_3D('',#151782,#151783,#151784); +#151782 = CARTESIAN_POINT('',(209.99164932015,-101.5231006798,1.585)); +#151783 = DIRECTION('',(0.,0.,-1.)); +#151784 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#151785 = ORIENTED_EDGE('',*,*,#151786,.T.); +#151786 = EDGE_CURVE('',#151778,#151787,#151789,.T.); +#151787 = VERTEX_POINT('',#151788); +#151788 = CARTESIAN_POINT('',(209.93165,-100.8231,1.585)); +#151789 = LINE('',#151790,#151791); +#151790 = CARTESIAN_POINT('',(209.93165,-101.5231,1.585)); +#151791 = VECTOR('',#151792,1.); +#151792 = DIRECTION('',(0.,1.,0.)); +#151793 = ORIENTED_EDGE('',*,*,#151794,.T.); +#151794 = EDGE_CURVE('',#151787,#151795,#151797,.T.); +#151795 = VERTEX_POINT('',#151796); +#151796 = CARTESIAN_POINT('',(208.55165,-100.8231,1.585)); +#151797 = LINE('',#151798,#151799); +#151798 = CARTESIAN_POINT('',(209.93165,-100.8231,1.585)); +#151799 = VECTOR('',#151800,1.); +#151800 = DIRECTION('',(-1.,0.,0.)); +#151801 = ORIENTED_EDGE('',*,*,#151802,.T.); +#151802 = EDGE_CURVE('',#151795,#151803,#151805,.T.); +#151803 = VERTEX_POINT('',#151804); +#151804 = CARTESIAN_POINT('',(208.55165,-102.5731,1.585)); +#151805 = LINE('',#151806,#151807); +#151806 = CARTESIAN_POINT('',(208.55165,-100.8231,1.585)); +#151807 = VECTOR('',#151808,1.); +#151808 = DIRECTION('',(0.,-1.,0.)); +#151809 = ORIENTED_EDGE('',*,*,#151810,.T.); +#151810 = EDGE_CURVE('',#151803,#151811,#151813,.T.); +#151811 = VERTEX_POINT('',#151812); +#151812 = CARTESIAN_POINT('',(208.49165,-102.6331,1.585)); +#151813 = CIRCLE('',#151814,5.999932016262E-02); +#151814 = AXIS2_PLACEMENT_3D('',#151815,#151816,#151817); +#151815 = CARTESIAN_POINT('',(208.49165067984,-102.5731006798,1.585)); +#151816 = DIRECTION('',(0.,0.,-1.)); +#151817 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#151818 = ORIENTED_EDGE('',*,*,#151819,.T.); +#151819 = EDGE_CURVE('',#151811,#151820,#151822,.T.); +#151820 = VERTEX_POINT('',#151821); +#151821 = CARTESIAN_POINT('',(207.79165,-102.6331,1.585)); +#151822 = LINE('',#151823,#151824); +#151823 = CARTESIAN_POINT('',(208.49165,-102.6331,1.585)); +#151824 = VECTOR('',#151825,1.); +#151825 = DIRECTION('',(-1.,0.,0.)); +#151826 = ORIENTED_EDGE('',*,*,#151827,.T.); +#151827 = EDGE_CURVE('',#151820,#151828,#151830,.T.); +#151828 = VERTEX_POINT('',#151829); +#151829 = CARTESIAN_POINT('',(207.79165,-104.0131,1.585)); +#151830 = LINE('',#151831,#151832); +#151831 = CARTESIAN_POINT('',(207.79165,-102.6331,1.585)); +#151832 = VECTOR('',#151833,1.); +#151833 = DIRECTION('',(0.,-1.,0.)); +#151834 = ORIENTED_EDGE('',*,*,#151835,.T.); +#151835 = EDGE_CURVE('',#151828,#151836,#151838,.T.); +#151836 = VERTEX_POINT('',#151837); +#151837 = CARTESIAN_POINT('',(208.49165,-104.0131,1.585)); +#151838 = LINE('',#151839,#151840); +#151839 = CARTESIAN_POINT('',(207.79165,-104.0131,1.585)); +#151840 = VECTOR('',#151841,1.); +#151841 = DIRECTION('',(1.,0.,0.)); +#151842 = ORIENTED_EDGE('',*,*,#151843,.T.); +#151843 = EDGE_CURVE('',#151836,#151844,#151846,.T.); +#151844 = VERTEX_POINT('',#151845); +#151845 = CARTESIAN_POINT('',(208.55165,-104.0731,1.585)); +#151846 = CIRCLE('',#151847,5.999932016262E-02); +#151847 = AXIS2_PLACEMENT_3D('',#151848,#151849,#151850); +#151848 = CARTESIAN_POINT('',(208.49165067984,-104.0730993201,1.585)); +#151849 = DIRECTION('',(0.,0.,-1.)); +#151850 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#151851 = ORIENTED_EDGE('',*,*,#151852,.T.); +#151852 = EDGE_CURVE('',#151844,#151853,#151855,.T.); +#151853 = VERTEX_POINT('',#151854); +#151854 = CARTESIAN_POINT('',(208.55165,-107.5731,1.585)); +#151855 = LINE('',#151856,#151857); +#151856 = CARTESIAN_POINT('',(208.55165,-104.0731,1.585)); +#151857 = VECTOR('',#151858,1.); +#151858 = DIRECTION('',(0.,-1.,0.)); +#151859 = ORIENTED_EDGE('',*,*,#151860,.T.); +#151860 = EDGE_CURVE('',#151853,#151861,#151863,.T.); +#151861 = VERTEX_POINT('',#151862); +#151862 = CARTESIAN_POINT('',(208.49165,-107.6331,1.585)); +#151863 = CIRCLE('',#151864,5.999932016262E-02); +#151864 = AXIS2_PLACEMENT_3D('',#151865,#151866,#151867); +#151865 = CARTESIAN_POINT('',(208.49165067984,-107.5731006798,1.585)); +#151866 = DIRECTION('',(0.,0.,-1.)); +#151867 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#151868 = ORIENTED_EDGE('',*,*,#151869,.T.); +#151869 = EDGE_CURVE('',#151861,#151870,#151872,.T.); +#151870 = VERTEX_POINT('',#151871); +#151871 = CARTESIAN_POINT('',(207.79165,-107.6331,1.585)); +#151872 = LINE('',#151873,#151874); +#151873 = CARTESIAN_POINT('',(208.49165,-107.6331,1.585)); +#151874 = VECTOR('',#151875,1.); +#151875 = DIRECTION('',(-1.,0.,0.)); +#151876 = ORIENTED_EDGE('',*,*,#151877,.T.); +#151877 = EDGE_CURVE('',#151870,#151878,#151880,.T.); +#151878 = VERTEX_POINT('',#151879); +#151879 = CARTESIAN_POINT('',(207.79165,-109.0131,1.585)); +#151880 = LINE('',#151881,#151882); +#151881 = CARTESIAN_POINT('',(207.79165,-107.6331,1.585)); +#151882 = VECTOR('',#151883,1.); +#151883 = DIRECTION('',(0.,-1.,0.)); +#151884 = ORIENTED_EDGE('',*,*,#151885,.T.); +#151885 = EDGE_CURVE('',#151878,#151886,#151888,.T.); +#151886 = VERTEX_POINT('',#151887); +#151887 = CARTESIAN_POINT('',(208.49165,-109.0131,1.585)); +#151888 = LINE('',#151889,#151890); +#151889 = CARTESIAN_POINT('',(207.79165,-109.0131,1.585)); +#151890 = VECTOR('',#151891,1.); +#151891 = DIRECTION('',(1.,0.,0.)); +#151892 = ORIENTED_EDGE('',*,*,#151893,.T.); +#151893 = EDGE_CURVE('',#151886,#151894,#151896,.T.); +#151894 = VERTEX_POINT('',#151895); +#151895 = CARTESIAN_POINT('',(208.55165,-109.0731,1.585)); +#151896 = CIRCLE('',#151897,5.999932016262E-02); +#151897 = AXIS2_PLACEMENT_3D('',#151898,#151899,#151900); +#151898 = CARTESIAN_POINT('',(208.49165067984,-109.0730993201,1.585)); +#151899 = DIRECTION('',(0.,0.,-1.)); +#151900 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#151901 = ORIENTED_EDGE('',*,*,#151902,.T.); +#151902 = EDGE_CURVE('',#151894,#151903,#151905,.T.); +#151903 = VERTEX_POINT('',#151904); +#151904 = CARTESIAN_POINT('',(208.55165,-110.8231,1.585)); +#151905 = LINE('',#151906,#151907); +#151906 = CARTESIAN_POINT('',(208.55165,-109.0731,1.585)); +#151907 = VECTOR('',#151908,1.); +#151908 = DIRECTION('',(0.,-1.,0.)); +#151909 = ORIENTED_EDGE('',*,*,#151910,.T.); +#151910 = EDGE_CURVE('',#151903,#151911,#151913,.T.); +#151911 = VERTEX_POINT('',#151912); +#151912 = CARTESIAN_POINT('',(209.93165,-110.8231,1.585)); +#151913 = LINE('',#151914,#151915); +#151914 = CARTESIAN_POINT('',(208.55165,-110.8231,1.585)); +#151915 = VECTOR('',#151916,1.); +#151916 = DIRECTION('',(1.,0.,0.)); +#151917 = ORIENTED_EDGE('',*,*,#151918,.T.); +#151918 = EDGE_CURVE('',#151911,#151919,#151921,.T.); +#151919 = VERTEX_POINT('',#151920); +#151920 = CARTESIAN_POINT('',(209.93165,-110.1231,1.585)); +#151921 = LINE('',#151922,#151923); +#151922 = CARTESIAN_POINT('',(209.93165,-110.8231,1.585)); +#151923 = VECTOR('',#151924,1.); +#151924 = DIRECTION('',(0.,1.,0.)); +#151925 = ORIENTED_EDGE('',*,*,#151926,.T.); +#151926 = EDGE_CURVE('',#151919,#151927,#151929,.T.); +#151927 = VERTEX_POINT('',#151928); +#151928 = CARTESIAN_POINT('',(209.99165,-110.0631,1.585)); +#151929 = CIRCLE('',#151930,5.999932016261E-02); +#151930 = AXIS2_PLACEMENT_3D('',#151931,#151932,#151933); +#151931 = CARTESIAN_POINT('',(209.99164932015,-110.1230993201,1.585)); +#151932 = DIRECTION('',(0.,0.,-1.)); +#151933 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#151934 = ORIENTED_EDGE('',*,*,#151935,.T.); +#151935 = EDGE_CURVE('',#151927,#151936,#151938,.T.); +#151936 = VERTEX_POINT('',#151937); +#151937 = CARTESIAN_POINT('',(212.88165,-110.0631,1.585)); +#151938 = LINE('',#151939,#151940); +#151939 = CARTESIAN_POINT('',(209.99165,-110.0631,1.585)); +#151940 = VECTOR('',#151941,1.); +#151941 = DIRECTION('',(1.,0.,0.)); +#151942 = ORIENTED_EDGE('',*,*,#151943,.T.); +#151943 = EDGE_CURVE('',#151936,#151944,#151946,.T.); +#151944 = VERTEX_POINT('',#151945); +#151945 = CARTESIAN_POINT('',(212.88165,-101.5831,1.585)); +#151946 = LINE('',#151947,#151948); +#151947 = CARTESIAN_POINT('',(212.88165,-110.0631,1.585)); +#151948 = VECTOR('',#151949,1.); +#151949 = DIRECTION('',(0.,1.,0.)); +#151950 = ORIENTED_EDGE('',*,*,#151951,.T.); +#151951 = EDGE_CURVE('',#151944,#151776,#151952,.T.); +#151952 = LINE('',#151953,#151954); +#151953 = CARTESIAN_POINT('',(212.88165,-101.5831,1.585)); +#151954 = VECTOR('',#151955,1.); +#151955 = DIRECTION('',(-1.,0.,0.)); +#151956 = FACE_BOUND('',#151957,.F.); +#151957 = EDGE_LOOP('',(#151958,#151968,#151976,#151984,#151992,#152001, + #152009,#152018,#152026,#152034)); +#151958 = ORIENTED_EDGE('',*,*,#151959,.T.); +#151959 = EDGE_CURVE('',#151960,#151962,#151964,.T.); +#151960 = VERTEX_POINT('',#151961); +#151961 = CARTESIAN_POINT('',(213.64165,-110.8231,1.585)); +#151962 = VERTEX_POINT('',#151963); +#151963 = CARTESIAN_POINT('',(213.64165,-100.8231,1.585)); +#151964 = LINE('',#151965,#151966); +#151965 = CARTESIAN_POINT('',(213.64165,-110.8231,1.585)); +#151966 = VECTOR('',#151967,1.); +#151967 = DIRECTION('',(0.,1.,0.)); +#151968 = ORIENTED_EDGE('',*,*,#151969,.T.); +#151969 = EDGE_CURVE('',#151962,#151970,#151972,.T.); +#151970 = VERTEX_POINT('',#151971); +#151971 = CARTESIAN_POINT('',(210.05165,-100.8231,1.585)); +#151972 = LINE('',#151973,#151974); +#151973 = CARTESIAN_POINT('',(213.64165,-100.8231,1.585)); +#151974 = VECTOR('',#151975,1.); +#151975 = DIRECTION('',(-1.,0.,0.)); +#151976 = ORIENTED_EDGE('',*,*,#151977,.T.); +#151977 = EDGE_CURVE('',#151970,#151978,#151980,.T.); +#151978 = VERTEX_POINT('',#151979); +#151979 = CARTESIAN_POINT('',(210.05165,-101.4631,1.585)); +#151980 = LINE('',#151981,#151982); +#151981 = CARTESIAN_POINT('',(210.05165,-100.8231,1.585)); +#151982 = VECTOR('',#151983,1.); +#151983 = DIRECTION('',(0.,-1.,0.)); +#151984 = ORIENTED_EDGE('',*,*,#151985,.T.); +#151985 = EDGE_CURVE('',#151978,#151986,#151988,.T.); +#151986 = VERTEX_POINT('',#151987); +#151987 = CARTESIAN_POINT('',(212.94165,-101.4631,1.585)); +#151988 = LINE('',#151989,#151990); +#151989 = CARTESIAN_POINT('',(210.05165,-101.4631,1.585)); +#151990 = VECTOR('',#151991,1.); +#151991 = DIRECTION('',(1.,0.,0.)); +#151992 = ORIENTED_EDGE('',*,*,#151993,.T.); +#151993 = EDGE_CURVE('',#151986,#151994,#151996,.T.); +#151994 = VERTEX_POINT('',#151995); +#151995 = CARTESIAN_POINT('',(213.00165,-101.5231,1.585)); +#151996 = CIRCLE('',#151997,5.999932016268E-02); +#151997 = AXIS2_PLACEMENT_3D('',#151998,#151999,#152000); +#151998 = CARTESIAN_POINT('',(212.94165067984,-101.5230993201,1.585)); +#151999 = DIRECTION('',(0.,0.,-1.)); +#152000 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#152001 = ORIENTED_EDGE('',*,*,#152002,.T.); +#152002 = EDGE_CURVE('',#151994,#152003,#152005,.T.); +#152003 = VERTEX_POINT('',#152004); +#152004 = CARTESIAN_POINT('',(213.00165,-110.1231,1.585)); +#152005 = LINE('',#152006,#152007); +#152006 = CARTESIAN_POINT('',(213.00165,-101.5231,1.585)); +#152007 = VECTOR('',#152008,1.); +#152008 = DIRECTION('',(0.,-1.,0.)); +#152009 = ORIENTED_EDGE('',*,*,#152010,.T.); +#152010 = EDGE_CURVE('',#152003,#152011,#152013,.T.); +#152011 = VERTEX_POINT('',#152012); +#152012 = CARTESIAN_POINT('',(212.94165,-110.1831,1.585)); +#152013 = CIRCLE('',#152014,5.999932016262E-02); +#152014 = AXIS2_PLACEMENT_3D('',#152015,#152016,#152017); +#152015 = CARTESIAN_POINT('',(212.94165067984,-110.1231006798,1.585)); +#152016 = DIRECTION('',(0.,0.,-1.)); +#152017 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#152018 = ORIENTED_EDGE('',*,*,#152019,.T.); +#152019 = EDGE_CURVE('',#152011,#152020,#152022,.T.); +#152020 = VERTEX_POINT('',#152021); +#152021 = CARTESIAN_POINT('',(210.05165,-110.1831,1.585)); +#152022 = LINE('',#152023,#152024); +#152023 = CARTESIAN_POINT('',(212.94165,-110.1831,1.585)); +#152024 = VECTOR('',#152025,1.); +#152025 = DIRECTION('',(-1.,0.,0.)); +#152026 = ORIENTED_EDGE('',*,*,#152027,.T.); +#152027 = EDGE_CURVE('',#152020,#152028,#152030,.T.); +#152028 = VERTEX_POINT('',#152029); +#152029 = CARTESIAN_POINT('',(210.05165,-110.8231,1.585)); +#152030 = LINE('',#152031,#152032); +#152031 = CARTESIAN_POINT('',(210.05165,-110.1831,1.585)); +#152032 = VECTOR('',#152033,1.); +#152033 = DIRECTION('',(0.,-1.,0.)); +#152034 = ORIENTED_EDGE('',*,*,#152035,.T.); +#152035 = EDGE_CURVE('',#152028,#151960,#152036,.T.); +#152036 = LINE('',#152037,#152038); +#152037 = CARTESIAN_POINT('',(210.05165,-110.8231,1.585)); +#152038 = VECTOR('',#152039,1.); +#152039 = DIRECTION('',(1.,0.,0.)); +#152040 = FACE_BOUND('',#152041,.F.); +#152041 = EDGE_LOOP('',(#152042,#152052,#152060,#152068)); +#152042 = ORIENTED_EDGE('',*,*,#152043,.T.); +#152043 = EDGE_CURVE('',#152044,#152046,#152048,.T.); +#152044 = VERTEX_POINT('',#152045); +#152045 = CARTESIAN_POINT('',(208.43165,-110.8131,1.585)); +#152046 = VERTEX_POINT('',#152047); +#152047 = CARTESIAN_POINT('',(208.43165,-109.1331,1.585)); +#152048 = LINE('',#152049,#152050); +#152049 = CARTESIAN_POINT('',(208.43165,-110.8131,1.585)); +#152050 = VECTOR('',#152051,1.); +#152051 = DIRECTION('',(0.,1.,0.)); +#152052 = ORIENTED_EDGE('',*,*,#152053,.T.); +#152053 = EDGE_CURVE('',#152046,#152054,#152056,.T.); +#152054 = VERTEX_POINT('',#152055); +#152055 = CARTESIAN_POINT('',(207.80165,-109.1331,1.585)); +#152056 = LINE('',#152057,#152058); +#152057 = CARTESIAN_POINT('',(208.43165,-109.1331,1.585)); +#152058 = VECTOR('',#152059,1.); +#152059 = DIRECTION('',(-1.,0.,0.)); +#152060 = ORIENTED_EDGE('',*,*,#152061,.T.); +#152061 = EDGE_CURVE('',#152054,#152062,#152064,.T.); +#152062 = VERTEX_POINT('',#152063); +#152063 = CARTESIAN_POINT('',(207.80165,-110.8131,1.585)); +#152064 = LINE('',#152065,#152066); +#152065 = CARTESIAN_POINT('',(207.80165,-109.1331,1.585)); +#152066 = VECTOR('',#152067,1.); +#152067 = DIRECTION('',(0.,-1.,0.)); +#152068 = ORIENTED_EDGE('',*,*,#152069,.T.); +#152069 = EDGE_CURVE('',#152062,#152044,#152070,.T.); +#152070 = LINE('',#152071,#152072); +#152071 = CARTESIAN_POINT('',(207.80165,-110.8131,1.585)); +#152072 = VECTOR('',#152073,1.); +#152073 = DIRECTION('',(1.,0.,0.)); +#152074 = FACE_BOUND('',#152075,.F.); +#152075 = EDGE_LOOP('',(#152076,#152086,#152094,#152102)); +#152076 = ORIENTED_EDGE('',*,*,#152077,.T.); +#152077 = EDGE_CURVE('',#152078,#152080,#152082,.T.); +#152078 = VERTEX_POINT('',#152079); +#152079 = CARTESIAN_POINT('',(208.43165,-107.5131,1.585)); +#152080 = VERTEX_POINT('',#152081); +#152081 = CARTESIAN_POINT('',(208.43165,-104.1331,1.585)); +#152082 = LINE('',#152083,#152084); +#152083 = CARTESIAN_POINT('',(208.43165,-107.5131,1.585)); +#152084 = VECTOR('',#152085,1.); +#152085 = DIRECTION('',(0.,1.,0.)); +#152086 = ORIENTED_EDGE('',*,*,#152087,.T.); +#152087 = EDGE_CURVE('',#152080,#152088,#152090,.T.); +#152088 = VERTEX_POINT('',#152089); +#152089 = CARTESIAN_POINT('',(207.80165,-104.1331,1.585)); +#152090 = LINE('',#152091,#152092); +#152091 = CARTESIAN_POINT('',(208.43165,-104.1331,1.585)); +#152092 = VECTOR('',#152093,1.); +#152093 = DIRECTION('',(-1.,0.,0.)); +#152094 = ORIENTED_EDGE('',*,*,#152095,.T.); +#152095 = EDGE_CURVE('',#152088,#152096,#152098,.T.); +#152096 = VERTEX_POINT('',#152097); +#152097 = CARTESIAN_POINT('',(207.80165,-107.5131,1.585)); +#152098 = LINE('',#152099,#152100); +#152099 = CARTESIAN_POINT('',(207.80165,-104.1331,1.585)); +#152100 = VECTOR('',#152101,1.); +#152101 = DIRECTION('',(0.,-1.,0.)); +#152102 = ORIENTED_EDGE('',*,*,#152103,.T.); +#152103 = EDGE_CURVE('',#152096,#152078,#152104,.T.); +#152104 = LINE('',#152105,#152106); +#152105 = CARTESIAN_POINT('',(207.80165,-107.5131,1.585)); +#152106 = VECTOR('',#152107,1.); +#152107 = DIRECTION('',(1.,0.,0.)); +#152108 = FACE_BOUND('',#152109,.F.); +#152109 = EDGE_LOOP('',(#152110,#152120,#152128,#152136)); +#152110 = ORIENTED_EDGE('',*,*,#152111,.T.); +#152111 = EDGE_CURVE('',#152112,#152114,#152116,.T.); +#152112 = VERTEX_POINT('',#152113); +#152113 = CARTESIAN_POINT('',(208.43165,-102.5131,1.585)); +#152114 = VERTEX_POINT('',#152115); +#152115 = CARTESIAN_POINT('',(208.43165,-100.8331,1.585)); +#152116 = LINE('',#152117,#152118); +#152117 = CARTESIAN_POINT('',(208.43165,-102.5131,1.585)); +#152118 = VECTOR('',#152119,1.); +#152119 = DIRECTION('',(0.,1.,0.)); +#152120 = ORIENTED_EDGE('',*,*,#152121,.T.); +#152121 = EDGE_CURVE('',#152114,#152122,#152124,.T.); +#152122 = VERTEX_POINT('',#152123); +#152123 = CARTESIAN_POINT('',(207.80165,-100.8331,1.585)); +#152124 = LINE('',#152125,#152126); +#152125 = CARTESIAN_POINT('',(208.43165,-100.8331,1.585)); +#152126 = VECTOR('',#152127,1.); +#152127 = DIRECTION('',(-1.,0.,0.)); +#152128 = ORIENTED_EDGE('',*,*,#152129,.T.); +#152129 = EDGE_CURVE('',#152122,#152130,#152132,.T.); +#152130 = VERTEX_POINT('',#152131); +#152131 = CARTESIAN_POINT('',(207.80165,-102.5131,1.585)); +#152132 = LINE('',#152133,#152134); +#152133 = CARTESIAN_POINT('',(207.80165,-100.8331,1.585)); +#152134 = VECTOR('',#152135,1.); +#152135 = DIRECTION('',(0.,-1.,0.)); +#152136 = ORIENTED_EDGE('',*,*,#152137,.T.); +#152137 = EDGE_CURVE('',#152130,#152112,#152138,.T.); +#152138 = LINE('',#152139,#152140); +#152139 = CARTESIAN_POINT('',(207.80165,-102.5131,1.585)); +#152140 = VECTOR('',#152141,1.); +#152141 = DIRECTION('',(1.,0.,0.)); +#152142 = PLANE('',#152143); +#152143 = AXIS2_PLACEMENT_3D('',#152144,#152145,#152146); +#152144 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152145 = DIRECTION('',(0.,0.,1.)); +#152146 = DIRECTION('',(1.,0.,-0.)); +#152147 = SHELL_BASED_SURFACE_MODEL('',(#152148)); +#152148 = OPEN_SHELL('',(#152149)); +#152149 = ADVANCED_FACE('',(#152150),#152309,.T.); +#152150 = FACE_BOUND('',#152151,.F.); +#152151 = EDGE_LOOP('',(#152152,#152163,#152171,#152179,#152187,#152195, + #152203,#152211,#152220,#152228,#152237,#152245,#152253,#152261, + #152270,#152278,#152286,#152294,#152303)); +#152152 = ORIENTED_EDGE('',*,*,#152153,.T.); +#152153 = EDGE_CURVE('',#152154,#152156,#152158,.T.); +#152154 = VERTEX_POINT('',#152155); +#152155 = CARTESIAN_POINT('',(181.221205,-109.828456,1.585)); +#152156 = VERTEX_POINT('',#152157); +#152157 = CARTESIAN_POINT('',(181.7306,-109.837786,1.585)); +#152158 = CIRCLE('',#152159,0.450326844012); +#152159 = AXIS2_PLACEMENT_3D('',#152160,#152161,#152162); +#152160 = CARTESIAN_POINT('',(181.4691020301,-110.2044098919,1.585)); +#152161 = DIRECTION('',(0.,0.,-1.)); +#152162 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#152163 = ORIENTED_EDGE('',*,*,#152164,.T.); +#152164 = EDGE_CURVE('',#152156,#152165,#152167,.T.); +#152165 = VERTEX_POINT('',#152166); +#152166 = CARTESIAN_POINT('',(181.794053,-109.903316,1.585)); +#152167 = LINE('',#152168,#152169); +#152168 = CARTESIAN_POINT('',(181.7306,-109.837786,1.585)); +#152169 = VECTOR('',#152170,1.); +#152170 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#152171 = ORIENTED_EDGE('',*,*,#152172,.T.); +#152172 = EDGE_CURVE('',#152165,#152173,#152175,.T.); +#152173 = VERTEX_POINT('',#152174); +#152174 = CARTESIAN_POINT('',(181.852114,-110.023763,1.585)); +#152175 = LINE('',#152176,#152177); +#152176 = CARTESIAN_POINT('',(181.794053,-109.903316,1.585)); +#152177 = VECTOR('',#152178,1.); +#152178 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#152179 = ORIENTED_EDGE('',*,*,#152180,.T.); +#152180 = EDGE_CURVE('',#152173,#152181,#152183,.T.); +#152181 = VERTEX_POINT('',#152182); +#152182 = CARTESIAN_POINT('',(181.851355,-110.150095,1.585)); +#152183 = LINE('',#152184,#152185); +#152184 = CARTESIAN_POINT('',(181.852114,-110.023763,1.585)); +#152185 = VECTOR('',#152186,1.); +#152186 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#152187 = ORIENTED_EDGE('',*,*,#152188,.T.); +#152188 = EDGE_CURVE('',#152181,#152189,#152191,.T.); +#152189 = VERTEX_POINT('',#152190); +#152190 = CARTESIAN_POINT('',(181.793297,-110.318158,1.585)); +#152191 = LINE('',#152192,#152193); +#152192 = CARTESIAN_POINT('',(181.851355,-110.150095,1.585)); +#152193 = VECTOR('',#152194,1.); +#152194 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#152195 = ORIENTED_EDGE('',*,*,#152196,.T.); +#152196 = EDGE_CURVE('',#152189,#152197,#152199,.T.); +#152197 = VERTEX_POINT('',#152198); +#152198 = CARTESIAN_POINT('',(181.340574,-110.772919,1.585)); +#152199 = LINE('',#152200,#152201); +#152200 = CARTESIAN_POINT('',(181.793297,-110.318158,1.585)); +#152201 = VECTOR('',#152202,1.); +#152202 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#152203 = ORIENTED_EDGE('',*,*,#152204,.T.); +#152204 = EDGE_CURVE('',#152197,#152205,#152207,.T.); +#152205 = VERTEX_POINT('',#152206); +#152206 = CARTESIAN_POINT('',(181.793187,-110.77436,1.585)); +#152207 = LINE('',#152208,#152209); +#152208 = CARTESIAN_POINT('',(181.340574,-110.772919,1.585)); +#152209 = VECTOR('',#152210,1.); +#152210 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#152211 = ORIENTED_EDGE('',*,*,#152212,.T.); +#152212 = EDGE_CURVE('',#152205,#152213,#152215,.T.); +#152213 = VERTEX_POINT('',#152214); +#152214 = CARTESIAN_POINT('',(181.778555,-110.922919,1.585)); +#152215 = CIRCLE('',#152216,7.500006711463E-02); +#152216 = AXIS2_PLACEMENT_3D('',#152217,#152218,#152219); +#152217 = CARTESIAN_POINT('',(181.77855506711,-110.8479189328,1.585)); +#152218 = DIRECTION('',(0.,0.,-1.)); +#152219 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#152220 = ORIENTED_EDGE('',*,*,#152221,.T.); +#152221 = EDGE_CURVE('',#152213,#152222,#152224,.T.); +#152222 = VERTEX_POINT('',#152223); +#152223 = CARTESIAN_POINT('',(181.144876,-110.921478,1.585)); +#152224 = LINE('',#152225,#152226); +#152225 = CARTESIAN_POINT('',(181.778555,-110.922919,1.585)); +#152226 = VECTOR('',#152227,1.); +#152227 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#152228 = ORIENTED_EDGE('',*,*,#152229,.T.); +#152229 = EDGE_CURVE('',#152222,#152230,#152232,.T.); +#152230 = VERTEX_POINT('',#152231); +#152231 = CARTESIAN_POINT('',(181.106475,-110.794886,1.585)); +#152232 = CIRCLE('',#152233,7.500021013109E-02); +#152233 = AXIS2_PLACEMENT_3D('',#152234,#152235,#152236); +#152234 = CARTESIAN_POINT('',(181.1595083167,-110.8479189976,1.585)); +#152235 = DIRECTION('',(0.,0.,-1.)); +#152236 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#152237 = ORIENTED_EDGE('',*,*,#152238,.T.); +#152238 = EDGE_CURVE('',#152230,#152239,#152241,.T.); +#152239 = VERTEX_POINT('',#152240); +#152240 = CARTESIAN_POINT('',(181.665383,-110.235976,1.585)); +#152241 = LINE('',#152242,#152243); +#152242 = CARTESIAN_POINT('',(181.106475,-110.794886,1.585)); +#152243 = VECTOR('',#152244,1.); +#152244 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#152245 = ORIENTED_EDGE('',*,*,#152246,.T.); +#152246 = EDGE_CURVE('',#152239,#152247,#152249,.T.); +#152247 = VERTEX_POINT('',#152248); +#152248 = CARTESIAN_POINT('',(181.703555,-110.121463,1.585)); +#152249 = LINE('',#152250,#152251); +#152250 = CARTESIAN_POINT('',(181.665383,-110.235976,1.585)); +#152251 = VECTOR('',#152252,1.); +#152252 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#152253 = ORIENTED_EDGE('',*,*,#152254,.T.); +#152254 = EDGE_CURVE('',#152247,#152255,#152257,.T.); +#152255 = VERTEX_POINT('',#152256); +#152256 = CARTESIAN_POINT('',(181.703555,-110.0561,1.585)); +#152257 = LINE('',#152258,#152259); +#152258 = CARTESIAN_POINT('',(181.703555,-110.121463,1.585)); +#152259 = VECTOR('',#152260,1.); +#152260 = DIRECTION('',(0.,1.,0.)); +#152261 = ORIENTED_EDGE('',*,*,#152262,.T.); +#152262 = EDGE_CURVE('',#152255,#152263,#152265,.T.); +#152263 = VERTEX_POINT('',#152264); +#152264 = CARTESIAN_POINT('',(181.570374,-109.922919,1.585)); +#152265 = CIRCLE('',#152266,0.18686440374); +#152266 = AXIS2_PLACEMENT_3D('',#152267,#152268,#152269); +#152267 = CARTESIAN_POINT('',(181.522838,-110.103636,1.585)); +#152268 = DIRECTION('',(0.,0.,1.)); +#152269 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#152270 = ORIENTED_EDGE('',*,*,#152271,.T.); +#152271 = EDGE_CURVE('',#152263,#152272,#152274,.T.); +#152272 = VERTEX_POINT('',#152273); +#152273 = CARTESIAN_POINT('',(181.367689,-109.922919,1.585)); +#152274 = LINE('',#152275,#152276); +#152275 = CARTESIAN_POINT('',(181.570374,-109.922919,1.585)); +#152276 = VECTOR('',#152277,1.); +#152277 = DIRECTION('',(-1.,0.,0.)); +#152278 = ORIENTED_EDGE('',*,*,#152279,.T.); +#152279 = EDGE_CURVE('',#152272,#152280,#152282,.T.); +#152280 = VERTEX_POINT('',#152281); +#152281 = CARTESIAN_POINT('',(181.299173,-109.957177,1.585)); +#152282 = LINE('',#152283,#152284); +#152283 = CARTESIAN_POINT('',(181.367689,-109.922919,1.585)); +#152284 = VECTOR('',#152285,1.); +#152285 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#152286 = ORIENTED_EDGE('',*,*,#152287,.T.); +#152287 = EDGE_CURVE('',#152280,#152288,#152290,.T.); +#152288 = VERTEX_POINT('',#152289); +#152289 = CARTESIAN_POINT('',(181.248795,-110.005517,1.585)); +#152290 = LINE('',#152291,#152292); +#152291 = CARTESIAN_POINT('',(181.299173,-109.957177,1.585)); +#152292 = VECTOR('',#152293,1.); +#152293 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#152294 = ORIENTED_EDGE('',*,*,#152295,.T.); +#152295 = EDGE_CURVE('',#152288,#152296,#152298,.T.); +#152296 = VERTEX_POINT('',#152297); +#152297 = CARTESIAN_POINT('',(181.154094,-109.890124,1.585)); +#152298 = CIRCLE('',#152299,7.499996838528E-02); +#152299 = AXIS2_PLACEMENT_3D('',#152300,#152301,#152302); +#152300 = CARTESIAN_POINT('',(181.207127,-109.9431569724,1.585)); +#152301 = DIRECTION('',(0.,0.,-1.)); +#152302 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#152303 = ORIENTED_EDGE('',*,*,#152304,.T.); +#152304 = EDGE_CURVE('',#152296,#152154,#152305,.T.); +#152305 = LINE('',#152306,#152307); +#152306 = CARTESIAN_POINT('',(181.154094,-109.890124,1.585)); +#152307 = VECTOR('',#152308,1.); +#152308 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#152309 = PLANE('',#152310); +#152310 = AXIS2_PLACEMENT_3D('',#152311,#152312,#152313); +#152311 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152312 = DIRECTION('',(0.,0.,1.)); +#152313 = DIRECTION('',(1.,0.,-0.)); +#152314 = SHELL_BASED_SURFACE_MODEL('',(#152315)); +#152315 = OPEN_SHELL('',(#152316)); +#152316 = ADVANCED_FACE('',(#152317,#152428),#152480,.T.); +#152317 = FACE_BOUND('',#152318,.F.); +#152318 = EDGE_LOOP('',(#152319,#152330,#152338,#152347,#152355,#152364, + #152372,#152380,#152389,#152397,#152405,#152413,#152422)); +#152319 = ORIENTED_EDGE('',*,*,#152320,.T.); +#152320 = EDGE_CURVE('',#152321,#152323,#152325,.T.); +#152321 = VERTEX_POINT('',#152322); +#152322 = CARTESIAN_POINT('',(177.228805,-109.833287,1.585)); +#152323 = VERTEX_POINT('',#152324); +#152324 = CARTESIAN_POINT('',(177.302364,-109.772919,1.585)); +#152325 = CIRCLE('',#152326,7.500074938989E-02); +#152326 = AXIS2_PLACEMENT_3D('',#152327,#152328,#152329); +#152327 = CARTESIAN_POINT('',(177.30236446611,-109.8479197493,1.585)); +#152328 = DIRECTION('',(0.,0.,-1.)); +#152329 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#152330 = ORIENTED_EDGE('',*,*,#152331,.T.); +#152331 = EDGE_CURVE('',#152323,#152332,#152334,.T.); +#152332 = VERTEX_POINT('',#152333); +#152333 = CARTESIAN_POINT('',(177.697948,-109.77436,1.585)); +#152334 = LINE('',#152335,#152336); +#152335 = CARTESIAN_POINT('',(177.302364,-109.772919,1.585)); +#152336 = VECTOR('',#152337,1.); +#152337 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#152338 = ORIENTED_EDGE('',*,*,#152339,.T.); +#152339 = EDGE_CURVE('',#152332,#152340,#152342,.T.); +#152340 = VERTEX_POINT('',#152341); +#152341 = CARTESIAN_POINT('',(177.947351,-110.023763,1.585)); +#152342 = CIRCLE('',#152343,0.347870264855); +#152343 = AXIS2_PLACEMENT_3D('',#152344,#152345,#152346); +#152344 = CARTESIAN_POINT('',(177.61062026502,-110.1110907349,1.585)); +#152345 = DIRECTION('',(0.,0.,-1.)); +#152346 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#152347 = ORIENTED_EDGE('',*,*,#152348,.T.); +#152348 = EDGE_CURVE('',#152340,#152349,#152351,.T.); +#152349 = VERTEX_POINT('',#152350); +#152350 = CARTESIAN_POINT('',(177.946129,-110.201062,1.585)); +#152351 = LINE('',#152352,#152353); +#152352 = CARTESIAN_POINT('',(177.947351,-110.023763,1.585)); +#152353 = VECTOR('',#152354,1.); +#152354 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#152355 = ORIENTED_EDGE('',*,*,#152356,.T.); +#152356 = EDGE_CURVE('',#152349,#152357,#152359,.T.); +#152357 = VERTEX_POINT('',#152358); +#152358 = CARTESIAN_POINT('',(177.697948,-110.445287,1.585)); +#152359 = CIRCLE('',#152360,0.348632345849); +#152360 = AXIS2_PLACEMENT_3D('',#152361,#152362,#152363); +#152361 = CARTESIAN_POINT('',(177.61017919403,-110.1078834593,1.585)); +#152362 = DIRECTION('',(0.,0.,-1.)); +#152363 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#152364 = ORIENTED_EDGE('',*,*,#152365,.T.); +#152365 = EDGE_CURVE('',#152357,#152366,#152368,.T.); +#152366 = VERTEX_POINT('',#152367); +#152367 = CARTESIAN_POINT('',(177.684431,-110.446618,1.585)); +#152368 = LINE('',#152369,#152370); +#152369 = CARTESIAN_POINT('',(177.697948,-110.445287,1.585)); +#152370 = VECTOR('',#152371,1.); +#152371 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#152372 = ORIENTED_EDGE('',*,*,#152373,.T.); +#152373 = EDGE_CURVE('',#152366,#152374,#152376,.T.); +#152374 = VERTEX_POINT('',#152375); +#152375 = CARTESIAN_POINT('',(177.942445,-110.817723,1.585)); +#152376 = LINE('',#152377,#152378); +#152377 = CARTESIAN_POINT('',(177.684431,-110.446618,1.585)); +#152378 = VECTOR('',#152379,1.); +#152379 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#152380 = ORIENTED_EDGE('',*,*,#152381,.T.); +#152381 = EDGE_CURVE('',#152374,#152382,#152384,.T.); +#152382 = VERTEX_POINT('',#152383); +#152383 = CARTESIAN_POINT('',(177.81235,-110.890929,1.585)); +#152384 = CIRCLE('',#152385,7.500005951702E-02); +#152385 = AXIS2_PLACEMENT_3D('',#152386,#152387,#152388); +#152386 = CARTESIAN_POINT('',(177.87379206294,-110.8479187473,1.585)); +#152387 = DIRECTION('',(0.,0.,-1.)); +#152388 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#152389 = ORIENTED_EDGE('',*,*,#152390,.T.); +#152390 = EDGE_CURVE('',#152382,#152391,#152393,.T.); +#152391 = VERTEX_POINT('',#152392); +#152392 = CARTESIAN_POINT('',(177.50141,-110.446728,1.585)); +#152393 = LINE('',#152394,#152395); +#152394 = CARTESIAN_POINT('',(177.81235,-110.890929,1.585)); +#152395 = VECTOR('',#152396,1.); +#152396 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#152397 = ORIENTED_EDGE('',*,*,#152398,.T.); +#152398 = EDGE_CURVE('',#152391,#152399,#152401,.T.); +#152399 = VERTEX_POINT('',#152400); +#152400 = CARTESIAN_POINT('',(177.377364,-110.446728,1.585)); +#152401 = LINE('',#152402,#152403); +#152402 = CARTESIAN_POINT('',(177.50141,-110.446728,1.585)); +#152403 = VECTOR('',#152404,1.); +#152404 = DIRECTION('',(-1.,0.,0.)); +#152405 = ORIENTED_EDGE('',*,*,#152406,.T.); +#152406 = EDGE_CURVE('',#152399,#152407,#152409,.T.); +#152407 = VERTEX_POINT('',#152408); +#152408 = CARTESIAN_POINT('',(177.375923,-110.862551,1.585)); +#152409 = LINE('',#152410,#152411); +#152410 = CARTESIAN_POINT('',(177.377364,-110.446728,1.585)); +#152411 = VECTOR('',#152412,1.); +#152412 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#152413 = ORIENTED_EDGE('',*,*,#152414,.T.); +#152414 = EDGE_CURVE('',#152407,#152415,#152417,.T.); +#152415 = VERTEX_POINT('',#152416); +#152416 = CARTESIAN_POINT('',(177.227364,-110.847919,1.585)); +#152417 = CIRCLE('',#152418,7.500006711464E-02); +#152418 = AXIS2_PLACEMENT_3D('',#152419,#152420,#152421); +#152419 = CARTESIAN_POINT('',(177.30236406711,-110.8479190671,1.585)); +#152420 = DIRECTION('',(-0.,0.,-1.)); +#152421 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#152422 = ORIENTED_EDGE('',*,*,#152423,.T.); +#152423 = EDGE_CURVE('',#152415,#152321,#152424,.T.); +#152424 = LINE('',#152425,#152426); +#152425 = CARTESIAN_POINT('',(177.227364,-110.847919,1.585)); +#152426 = VECTOR('',#152427,1.); +#152427 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#152428 = FACE_BOUND('',#152429,.F.); +#152429 = EDGE_LOOP('',(#152430,#152441,#152449,#152457,#152465,#152474) + ); +#152430 = ORIENTED_EDGE('',*,*,#152431,.T.); +#152431 = EDGE_CURVE('',#152432,#152434,#152436,.T.); +#152432 = VERTEX_POINT('',#152433); +#152433 = CARTESIAN_POINT('',(177.798792,-110.0561,1.585)); +#152434 = VERTEX_POINT('',#152435); +#152435 = CARTESIAN_POINT('',(177.665611,-109.922919,1.585)); +#152436 = CIRCLE('',#152437,0.18686440374); +#152437 = AXIS2_PLACEMENT_3D('',#152438,#152439,#152440); +#152438 = CARTESIAN_POINT('',(177.618075,-110.103636,1.585)); +#152439 = DIRECTION('',(0.,0.,1.)); +#152440 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#152441 = ORIENTED_EDGE('',*,*,#152442,.T.); +#152442 = EDGE_CURVE('',#152434,#152443,#152445,.T.); +#152443 = VERTEX_POINT('',#152444); +#152444 = CARTESIAN_POINT('',(177.377364,-109.922919,1.585)); +#152445 = LINE('',#152446,#152447); +#152446 = CARTESIAN_POINT('',(177.665611,-109.922919,1.585)); +#152447 = VECTOR('',#152448,1.); +#152448 = DIRECTION('',(-1.,0.,0.)); +#152449 = ORIENTED_EDGE('',*,*,#152450,.T.); +#152450 = EDGE_CURVE('',#152443,#152451,#152453,.T.); +#152451 = VERTEX_POINT('',#152452); +#152452 = CARTESIAN_POINT('',(177.377364,-110.296728,1.585)); +#152453 = LINE('',#152454,#152455); +#152454 = CARTESIAN_POINT('',(177.377364,-109.922919,1.585)); +#152455 = VECTOR('',#152456,1.); +#152456 = DIRECTION('',(0.,-1.,0.)); +#152457 = ORIENTED_EDGE('',*,*,#152458,.T.); +#152458 = EDGE_CURVE('',#152451,#152459,#152461,.T.); +#152459 = VERTEX_POINT('',#152460); +#152460 = CARTESIAN_POINT('',(177.665611,-110.296728,1.585)); +#152461 = LINE('',#152462,#152463); +#152462 = CARTESIAN_POINT('',(177.377364,-110.296728,1.585)); +#152463 = VECTOR('',#152464,1.); +#152464 = DIRECTION('',(1.,0.,0.)); +#152465 = ORIENTED_EDGE('',*,*,#152466,.T.); +#152466 = EDGE_CURVE('',#152459,#152467,#152469,.T.); +#152467 = VERTEX_POINT('',#152468); +#152468 = CARTESIAN_POINT('',(177.798792,-110.163547,1.585)); +#152469 = CIRCLE('',#152470,0.18686440374); +#152470 = AXIS2_PLACEMENT_3D('',#152471,#152472,#152473); +#152471 = CARTESIAN_POINT('',(177.618075,-110.116011,1.585)); +#152472 = DIRECTION('',(0.,0.,1.)); +#152473 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#152474 = ORIENTED_EDGE('',*,*,#152475,.T.); +#152475 = EDGE_CURVE('',#152467,#152432,#152476,.T.); +#152476 = LINE('',#152477,#152478); +#152477 = CARTESIAN_POINT('',(177.798792,-110.163547,1.585)); +#152478 = VECTOR('',#152479,1.); +#152479 = DIRECTION('',(0.,1.,0.)); +#152480 = PLANE('',#152481); +#152481 = AXIS2_PLACEMENT_3D('',#152482,#152483,#152484); +#152482 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152483 = DIRECTION('',(0.,0.,1.)); +#152484 = DIRECTION('',(1.,0.,-0.)); +#152485 = SHELL_BASED_SURFACE_MODEL('',(#152486)); +#152486 = OPEN_SHELL('',(#152487)); +#152487 = ADVANCED_FACE('',(#152488),#152646,.T.); +#152488 = FACE_BOUND('',#152489,.F.); +#152489 = EDGE_LOOP('',(#152490,#152500,#152508,#152517,#152525,#152533, + #152541,#152549,#152557,#152566,#152574,#152582,#152591,#152599, + #152607,#152616,#152624,#152632,#152640)); +#152490 = ORIENTED_EDGE('',*,*,#152491,.T.); +#152491 = EDGE_CURVE('',#152492,#152494,#152496,.T.); +#152492 = VERTEX_POINT('',#152493); +#152493 = CARTESIAN_POINT('',(178.316442,-109.828456,1.585)); +#152494 = VERTEX_POINT('',#152495); +#152495 = CARTESIAN_POINT('',(178.430589,-109.77436,1.585)); +#152496 = LINE('',#152497,#152498); +#152497 = CARTESIAN_POINT('',(178.316442,-109.828456,1.585)); +#152498 = VECTOR('',#152499,1.); +#152499 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#152500 = ORIENTED_EDGE('',*,*,#152501,.T.); +#152501 = EDGE_CURVE('',#152494,#152502,#152504,.T.); +#152502 = VERTEX_POINT('',#152503); +#152503 = CARTESIAN_POINT('',(178.555091,-109.77436,1.585)); +#152504 = LINE('',#152505,#152506); +#152505 = CARTESIAN_POINT('',(178.430589,-109.77436,1.585)); +#152506 = VECTOR('',#152507,1.); +#152507 = DIRECTION('',(1.,0.,0.)); +#152508 = ORIENTED_EDGE('',*,*,#152509,.T.); +#152509 = EDGE_CURVE('',#152502,#152510,#152512,.T.); +#152510 = VERTEX_POINT('',#152511); +#152511 = CARTESIAN_POINT('',(178.540459,-109.922919,1.585)); +#152512 = CIRCLE('',#152513,7.500006711464E-02); +#152513 = AXIS2_PLACEMENT_3D('',#152514,#152515,#152516); +#152514 = CARTESIAN_POINT('',(178.54045906711,-109.8479189328,1.585)); +#152515 = DIRECTION('',(0.,0.,-1.)); +#152516 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#152517 = ORIENTED_EDGE('',*,*,#152518,.T.); +#152518 = EDGE_CURVE('',#152510,#152519,#152521,.T.); +#152519 = VERTEX_POINT('',#152520); +#152520 = CARTESIAN_POINT('',(178.462926,-109.922919,1.585)); +#152521 = LINE('',#152522,#152523); +#152522 = CARTESIAN_POINT('',(178.540459,-109.922919,1.585)); +#152523 = VECTOR('',#152524,1.); +#152524 = DIRECTION('',(-1.,0.,0.)); +#152525 = ORIENTED_EDGE('',*,*,#152526,.T.); +#152526 = EDGE_CURVE('',#152519,#152527,#152529,.T.); +#152527 = VERTEX_POINT('',#152528); +#152528 = CARTESIAN_POINT('',(178.405884,-109.951439,1.585)); +#152529 = LINE('',#152530,#152531); +#152530 = CARTESIAN_POINT('',(178.462926,-109.922919,1.585)); +#152531 = VECTOR('',#152532,1.); +#152532 = DIRECTION('',(-0.894433463017,-0.447201051247,0.)); +#152533 = ORIENTED_EDGE('',*,*,#152534,.T.); +#152534 = EDGE_CURVE('',#152527,#152535,#152537,.T.); +#152535 = VERTEX_POINT('',#152536); +#152536 = CARTESIAN_POINT('',(178.377364,-110.008481,1.585)); +#152537 = LINE('',#152538,#152539); +#152538 = CARTESIAN_POINT('',(178.405884,-109.951439,1.585)); +#152539 = VECTOR('',#152540,1.); +#152540 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#152541 = ORIENTED_EDGE('',*,*,#152542,.T.); +#152542 = EDGE_CURVE('',#152535,#152543,#152545,.T.); +#152543 = VERTEX_POINT('',#152544); +#152544 = CARTESIAN_POINT('',(178.377364,-110.106252,1.585)); +#152545 = LINE('',#152546,#152547); +#152546 = CARTESIAN_POINT('',(178.377364,-110.008481,1.585)); +#152547 = VECTOR('',#152548,1.); +#152548 = DIRECTION('',(0.,-1.,0.)); +#152549 = ORIENTED_EDGE('',*,*,#152550,.T.); +#152550 = EDGE_CURVE('',#152543,#152551,#152553,.T.); +#152551 = VERTEX_POINT('',#152552); +#152552 = CARTESIAN_POINT('',(178.555091,-110.107693,1.585)); +#152553 = LINE('',#152554,#152555); +#152554 = CARTESIAN_POINT('',(178.377364,-110.106252,1.585)); +#152555 = VECTOR('',#152556,1.); +#152556 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#152557 = ORIENTED_EDGE('',*,*,#152558,.T.); +#152558 = EDGE_CURVE('',#152551,#152559,#152561,.T.); +#152559 = VERTEX_POINT('',#152560); +#152560 = CARTESIAN_POINT('',(178.540459,-110.256252,1.585)); +#152561 = CIRCLE('',#152562,7.500006711464E-02); +#152562 = AXIS2_PLACEMENT_3D('',#152563,#152564,#152565); +#152563 = CARTESIAN_POINT('',(178.54045906711,-110.1812519328,1.585)); +#152564 = DIRECTION('',(0.,0.,-1.)); +#152565 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#152566 = ORIENTED_EDGE('',*,*,#152567,.T.); +#152567 = EDGE_CURVE('',#152559,#152568,#152570,.T.); +#152568 = VERTEX_POINT('',#152569); +#152569 = CARTESIAN_POINT('',(178.377364,-110.256252,1.585)); +#152570 = LINE('',#152571,#152572); +#152571 = CARTESIAN_POINT('',(178.540459,-110.256252,1.585)); +#152572 = VECTOR('',#152573,1.); +#152573 = DIRECTION('',(-1.,0.,0.)); +#152574 = ORIENTED_EDGE('',*,*,#152575,.T.); +#152575 = EDGE_CURVE('',#152568,#152576,#152578,.T.); +#152576 = VERTEX_POINT('',#152577); +#152577 = CARTESIAN_POINT('',(178.375923,-110.862551,1.585)); +#152578 = LINE('',#152579,#152580); +#152579 = CARTESIAN_POINT('',(178.377364,-110.256252,1.585)); +#152580 = VECTOR('',#152581,1.); +#152581 = DIRECTION('',(-2.376708406372E-03,-0.999997175625,0.)); +#152582 = ORIENTED_EDGE('',*,*,#152583,.T.); +#152583 = EDGE_CURVE('',#152576,#152584,#152586,.T.); +#152584 = VERTEX_POINT('',#152585); +#152585 = CARTESIAN_POINT('',(178.227364,-110.847919,1.585)); +#152586 = CIRCLE('',#152587,7.500006711464E-02); +#152587 = AXIS2_PLACEMENT_3D('',#152588,#152589,#152590); +#152588 = CARTESIAN_POINT('',(178.30236406711,-110.8479190671,1.585)); +#152589 = DIRECTION('',(-0.,0.,-1.)); +#152590 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#152591 = ORIENTED_EDGE('',*,*,#152592,.T.); +#152592 = EDGE_CURVE('',#152584,#152593,#152595,.T.); +#152593 = VERTEX_POINT('',#152594); +#152594 = CARTESIAN_POINT('',(178.227364,-110.256252,1.585)); +#152595 = LINE('',#152596,#152597); +#152596 = CARTESIAN_POINT('',(178.227364,-110.847919,1.585)); +#152597 = VECTOR('',#152598,1.); +#152598 = DIRECTION('',(0.,1.,0.)); +#152599 = ORIENTED_EDGE('',*,*,#152600,.T.); +#152600 = EDGE_CURVE('',#152593,#152601,#152603,.T.); +#152601 = VERTEX_POINT('',#152602); +#152602 = CARTESIAN_POINT('',(178.144875,-110.254811,1.585)); +#152603 = LINE('',#152604,#152605); +#152604 = CARTESIAN_POINT('',(178.227364,-110.256252,1.585)); +#152605 = VECTOR('',#152606,1.); +#152606 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#152607 = ORIENTED_EDGE('',*,*,#152608,.T.); +#152608 = EDGE_CURVE('',#152601,#152609,#152611,.T.); +#152609 = VERTEX_POINT('',#152610); +#152610 = CARTESIAN_POINT('',(178.159507,-110.106252,1.585)); +#152611 = CIRCLE('',#152612,7.500006711464E-02); +#152612 = AXIS2_PLACEMENT_3D('',#152613,#152614,#152615); +#152613 = CARTESIAN_POINT('',(178.15950693288,-110.1812520671,1.585)); +#152614 = DIRECTION('',(0.,0.,-1.)); +#152615 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#152616 = ORIENTED_EDGE('',*,*,#152617,.T.); +#152617 = EDGE_CURVE('',#152609,#152618,#152620,.T.); +#152618 = VERTEX_POINT('',#152619); +#152619 = CARTESIAN_POINT('',(178.227364,-110.106252,1.585)); +#152620 = LINE('',#152621,#152622); +#152621 = CARTESIAN_POINT('',(178.159507,-110.106252,1.585)); +#152622 = VECTOR('',#152623,1.); +#152623 = DIRECTION('',(1.,0.,0.)); +#152624 = ORIENTED_EDGE('',*,*,#152625,.T.); +#152625 = EDGE_CURVE('',#152618,#152626,#152628,.T.); +#152626 = VERTEX_POINT('',#152627); +#152627 = CARTESIAN_POINT('',(178.230027,-109.970967,1.585)); +#152628 = LINE('',#152629,#152630); +#152629 = CARTESIAN_POINT('',(178.227364,-110.106252,1.585)); +#152630 = VECTOR('',#152631,1.); +#152631 = DIRECTION('',(1.968055754665E-02,0.999806319071,0.)); +#152632 = ORIENTED_EDGE('',*,*,#152633,.T.); +#152633 = EDGE_CURVE('',#152626,#152634,#152636,.T.); +#152634 = VERTEX_POINT('',#152635); +#152635 = CARTESIAN_POINT('',(178.290733,-109.849554,1.585)); +#152636 = LINE('',#152637,#152638); +#152637 = CARTESIAN_POINT('',(178.230027,-109.970967,1.585)); +#152638 = VECTOR('',#152639,1.); +#152639 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#152640 = ORIENTED_EDGE('',*,*,#152641,.T.); +#152641 = EDGE_CURVE('',#152634,#152492,#152642,.T.); +#152642 = LINE('',#152643,#152644); +#152643 = CARTESIAN_POINT('',(178.290733,-109.849554,1.585)); +#152644 = VECTOR('',#152645,1.); +#152645 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#152646 = PLANE('',#152647); +#152647 = AXIS2_PLACEMENT_3D('',#152648,#152649,#152650); +#152648 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152649 = DIRECTION('',(0.,0.,1.)); +#152650 = DIRECTION('',(1.,0.,-0.)); +#152651 = SHELL_BASED_SURFACE_MODEL('',(#152652)); +#152652 = OPEN_SHELL('',(#152653)); +#152653 = ADVANCED_FACE('',(#152654),#152756,.T.); +#152654 = FACE_BOUND('',#152655,.F.); +#152655 = EDGE_LOOP('',(#152656,#152667,#152675,#152683,#152691,#152700, + #152708,#152717,#152725,#152734,#152742,#152750)); +#152656 = ORIENTED_EDGE('',*,*,#152657,.T.); +#152657 = EDGE_CURVE('',#152658,#152660,#152662,.T.); +#152658 = VERTEX_POINT('',#152659); +#152659 = CARTESIAN_POINT('',(178.832125,-110.118892,1.585)); +#152660 = VERTEX_POINT('',#152661); +#152661 = CARTESIAN_POINT('',(178.936153,-110.139584,1.585)); +#152662 = CIRCLE('',#152663,7.499946135252E-02); +#152663 = AXIS2_PLACEMENT_3D('',#152664,#152665,#152666); +#152664 = CARTESIAN_POINT('',(178.87379313357,-110.1812513284,1.585)); +#152665 = DIRECTION('',(0.,0.,-1.)); +#152666 = DIRECTION('',(-0.55557910444,0.83146368454,0.)); +#152667 = ORIENTED_EDGE('',*,*,#152668,.T.); +#152668 = EDGE_CURVE('',#152660,#152669,#152671,.T.); +#152669 = VERTEX_POINT('',#152670); +#152670 = CARTESIAN_POINT('',(178.943658,-110.157704,1.585)); +#152671 = LINE('',#152672,#152673); +#152672 = CARTESIAN_POINT('',(178.936153,-110.139584,1.585)); +#152673 = VECTOR('',#152674,1.); +#152674 = DIRECTION('',(0.382659506909,-0.923889442397,0.)); +#152675 = ORIENTED_EDGE('',*,*,#152676,.T.); +#152676 = EDGE_CURVE('',#152669,#152677,#152679,.T.); +#152677 = VERTEX_POINT('',#152678); +#152678 = CARTESIAN_POINT('',(179.049637,-110.107693,1.585)); +#152679 = LINE('',#152680,#152681); +#152680 = CARTESIAN_POINT('',(178.943658,-110.157704,1.585)); +#152681 = VECTOR('',#152682,1.); +#152682 = DIRECTION('',(0.904362746847,0.426764598011,0.)); +#152683 = ORIENTED_EDGE('',*,*,#152684,.T.); +#152684 = EDGE_CURVE('',#152677,#152685,#152687,.T.); +#152685 = VERTEX_POINT('',#152686); +#152686 = CARTESIAN_POINT('',(179.174139,-110.107693,1.585)); +#152687 = LINE('',#152688,#152689); +#152688 = CARTESIAN_POINT('',(179.049637,-110.107693,1.585)); +#152689 = VECTOR('',#152690,1.); +#152690 = DIRECTION('',(1.,0.,0.)); +#152691 = ORIENTED_EDGE('',*,*,#152692,.T.); +#152692 = EDGE_CURVE('',#152685,#152693,#152695,.T.); +#152693 = VERTEX_POINT('',#152694); +#152694 = CARTESIAN_POINT('',(179.159507,-110.256252,1.585)); +#152695 = CIRCLE('',#152696,7.500006711464E-02); +#152696 = AXIS2_PLACEMENT_3D('',#152697,#152698,#152699); +#152697 = CARTESIAN_POINT('',(179.15950706711,-110.1812519328,1.585)); +#152698 = DIRECTION('',(0.,0.,-1.)); +#152699 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#152700 = ORIENTED_EDGE('',*,*,#152701,.T.); +#152701 = EDGE_CURVE('',#152693,#152702,#152704,.T.); +#152702 = VERTEX_POINT('',#152703); +#152703 = CARTESIAN_POINT('',(179.081974,-110.256252,1.585)); +#152704 = LINE('',#152705,#152706); +#152705 = CARTESIAN_POINT('',(179.159507,-110.256252,1.585)); +#152706 = VECTOR('',#152707,1.); +#152707 = DIRECTION('',(-1.,0.,0.)); +#152708 = ORIENTED_EDGE('',*,*,#152709,.T.); +#152709 = EDGE_CURVE('',#152702,#152710,#152712,.T.); +#152710 = VERTEX_POINT('',#152711); +#152711 = CARTESIAN_POINT('',(178.948793,-110.389433,1.585)); +#152712 = CIRCLE('',#152713,0.18686440374); +#152713 = AXIS2_PLACEMENT_3D('',#152714,#152715,#152716); +#152714 = CARTESIAN_POINT('',(179.12951,-110.436969,1.585)); +#152715 = DIRECTION('',(0.,0.,1.)); +#152716 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#152717 = ORIENTED_EDGE('',*,*,#152718,.T.); +#152718 = EDGE_CURVE('',#152710,#152719,#152721,.T.); +#152719 = VERTEX_POINT('',#152720); +#152720 = CARTESIAN_POINT('',(178.947352,-110.862551,1.585)); +#152721 = LINE('',#152722,#152723); +#152722 = CARTESIAN_POINT('',(178.948793,-110.389433,1.585)); +#152723 = VECTOR('',#152724,1.); +#152724 = DIRECTION('',(-3.045737672744E-03,-0.99999536173,0.)); +#152725 = ORIENTED_EDGE('',*,*,#152726,.T.); +#152726 = EDGE_CURVE('',#152719,#152727,#152729,.T.); +#152727 = VERTEX_POINT('',#152728); +#152728 = CARTESIAN_POINT('',(178.798793,-110.847919,1.585)); +#152729 = CIRCLE('',#152730,7.500006711464E-02); +#152730 = AXIS2_PLACEMENT_3D('',#152731,#152732,#152733); +#152731 = CARTESIAN_POINT('',(178.87379306711,-110.8479190671,1.585)); +#152732 = DIRECTION('',(-0.,0.,-1.)); +#152733 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#152734 = ORIENTED_EDGE('',*,*,#152735,.T.); +#152735 = EDGE_CURVE('',#152727,#152736,#152738,.T.); +#152736 = VERTEX_POINT('',#152737); +#152737 = CARTESIAN_POINT('',(178.800234,-110.16662,1.585)); +#152738 = LINE('',#152739,#152740); +#152739 = CARTESIAN_POINT('',(178.798793,-110.847919,1.585)); +#152740 = VECTOR('',#152741,1.); +#152741 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#152742 = ORIENTED_EDGE('',*,*,#152743,.T.); +#152743 = EDGE_CURVE('',#152736,#152744,#152746,.T.); +#152744 = VERTEX_POINT('',#152745); +#152745 = CARTESIAN_POINT('',(178.811433,-110.139584,1.585)); +#152746 = LINE('',#152747,#152748); +#152747 = CARTESIAN_POINT('',(178.800234,-110.16662,1.585)); +#152748 = VECTOR('',#152749,1.); +#152749 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#152750 = ORIENTED_EDGE('',*,*,#152751,.T.); +#152751 = EDGE_CURVE('',#152744,#152658,#152752,.T.); +#152752 = LINE('',#152753,#152754); +#152753 = CARTESIAN_POINT('',(178.811433,-110.139584,1.585)); +#152754 = VECTOR('',#152755,1.); +#152755 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#152756 = PLANE('',#152757); +#152757 = AXIS2_PLACEMENT_3D('',#152758,#152759,#152760); +#152758 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152759 = DIRECTION('',(0.,0.,1.)); +#152760 = DIRECTION('',(1.,0.,-0.)); +#152761 = SHELL_BASED_SURFACE_MODEL('',(#152762)); +#152762 = OPEN_SHELL('',(#152763)); +#152763 = ADVANCED_FACE('',(#152764,#152936),#152987,.T.); +#152764 = FACE_BOUND('',#152765,.F.); +#152765 = EDGE_LOOP('',(#152766,#152777,#152785,#152793,#152801,#152809, + #152817,#152825,#152833,#152841,#152849,#152857,#152865,#152874, + #152882,#152890,#152898,#152906,#152914,#152922,#152930)); +#152766 = ORIENTED_EDGE('',*,*,#152767,.T.); +#152767 = EDGE_CURVE('',#152768,#152770,#152772,.T.); +#152768 = VERTEX_POINT('',#152769); +#152769 = CARTESIAN_POINT('',(179.4593,-110.161789,1.585)); +#152770 = VERTEX_POINT('',#152771); +#152771 = CARTESIAN_POINT('',(179.919777,-110.169621,1.585)); +#152772 = CIRCLE('',#152773,0.398777683503); +#152773 = AXIS2_PLACEMENT_3D('',#152774,#152775,#152776); +#152774 = CARTESIAN_POINT('',(179.68400178885,-110.491232086,1.585)); +#152775 = DIRECTION('',(0.,0.,-1.)); +#152776 = DIRECTION('',(-0.563476338197,0.826132202673,0.)); +#152777 = ORIENTED_EDGE('',*,*,#152778,.T.); +#152778 = EDGE_CURVE('',#152770,#152779,#152781,.T.); +#152779 = VERTEX_POINT('',#152780); +#152780 = CARTESIAN_POINT('',(179.940875,-110.19533,1.585)); +#152781 = LINE('',#152782,#152783); +#152782 = CARTESIAN_POINT('',(179.919777,-110.169621,1.585)); +#152783 = VECTOR('',#152784,1.); +#152784 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#152785 = ORIENTED_EDGE('',*,*,#152786,.T.); +#152786 = EDGE_CURVE('',#152779,#152787,#152789,.T.); +#152787 = VERTEX_POINT('',#152788); +#152788 = CARTESIAN_POINT('',(179.994971,-110.309477,1.585)); +#152789 = LINE('',#152790,#152791); +#152790 = CARTESIAN_POINT('',(179.940875,-110.19533,1.585)); +#152791 = VECTOR('',#152792,1.); +#152792 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#152793 = ORIENTED_EDGE('',*,*,#152794,.T.); +#152794 = EDGE_CURVE('',#152787,#152795,#152797,.T.); +#152795 = VERTEX_POINT('',#152796); +#152796 = CARTESIAN_POINT('',(179.994971,-110.433979,1.585)); +#152797 = LINE('',#152798,#152799); +#152798 = CARTESIAN_POINT('',(179.994971,-110.309477,1.585)); +#152799 = VECTOR('',#152800,1.); +#152800 = DIRECTION('',(0.,-1.,0.)); +#152801 = ORIENTED_EDGE('',*,*,#152802,.T.); +#152802 = EDGE_CURVE('',#152795,#152803,#152805,.T.); +#152803 = VERTEX_POINT('',#152804); +#152804 = CARTESIAN_POINT('',(179.9745,-110.472324,1.585)); +#152805 = LINE('',#152806,#152807); +#152806 = CARTESIAN_POINT('',(179.994971,-110.433979,1.585)); +#152807 = VECTOR('',#152808,1.); +#152808 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#152809 = ORIENTED_EDGE('',*,*,#152810,.T.); +#152810 = EDGE_CURVE('',#152803,#152811,#152813,.T.); +#152811 = VERTEX_POINT('',#152812); +#152812 = CARTESIAN_POINT('',(179.93612,-110.492891,1.585)); +#152813 = LINE('',#152814,#152815); +#152814 = CARTESIAN_POINT('',(179.9745,-110.472324,1.585)); +#152815 = VECTOR('',#152816,1.); +#152816 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#152817 = ORIENTED_EDGE('',*,*,#152818,.T.); +#152818 = EDGE_CURVE('',#152811,#152819,#152821,.T.); +#152819 = VERTEX_POINT('',#152820); +#152820 = CARTESIAN_POINT('',(179.520222,-110.57607,1.585)); +#152821 = LINE('',#152822,#152823); +#152822 = CARTESIAN_POINT('',(179.93612,-110.492891,1.585)); +#152823 = VECTOR('',#152824,1.); +#152824 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#152825 = ORIENTED_EDGE('',*,*,#152826,.T.); +#152826 = EDGE_CURVE('',#152819,#152827,#152829,.T.); +#152827 = VERTEX_POINT('',#152828); +#152828 = CARTESIAN_POINT('',(179.520222,-110.687356,1.585)); +#152829 = LINE('',#152830,#152831); +#152830 = CARTESIAN_POINT('',(179.520222,-110.57607,1.585)); +#152831 = VECTOR('',#152832,1.); +#152832 = DIRECTION('',(0.,-1.,0.)); +#152833 = ORIENTED_EDGE('',*,*,#152834,.T.); +#152834 = EDGE_CURVE('',#152827,#152835,#152837,.T.); +#152835 = VERTEX_POINT('',#152836); +#152836 = CARTESIAN_POINT('',(179.548742,-110.744398,1.585)); +#152837 = LINE('',#152838,#152839); +#152838 = CARTESIAN_POINT('',(179.520222,-110.687356,1.585)); +#152839 = VECTOR('',#152840,1.); +#152840 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#152841 = ORIENTED_EDGE('',*,*,#152842,.T.); +#152842 = EDGE_CURVE('',#152835,#152843,#152845,.T.); +#152843 = VERTEX_POINT('',#152844); +#152844 = CARTESIAN_POINT('',(179.605784,-110.772919,1.585)); +#152845 = LINE('',#152846,#152847); +#152846 = CARTESIAN_POINT('',(179.548742,-110.744398,1.585)); +#152847 = VECTOR('',#152848,1.); +#152848 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#152849 = ORIENTED_EDGE('',*,*,#152850,.T.); +#152850 = EDGE_CURVE('',#152843,#152851,#152853,.T.); +#152851 = VERTEX_POINT('',#152852); +#152852 = CARTESIAN_POINT('',(179.76085,-110.772919,1.585)); +#152853 = LINE('',#152854,#152855); +#152854 = CARTESIAN_POINT('',(179.605784,-110.772919,1.585)); +#152855 = VECTOR('',#152856,1.); +#152856 = DIRECTION('',(1.,0.,0.)); +#152857 = ORIENTED_EDGE('',*,*,#152858,.T.); +#152858 = EDGE_CURVE('',#152851,#152859,#152861,.T.); +#152859 = VERTEX_POINT('',#152860); +#152860 = CARTESIAN_POINT('',(179.853983,-110.727963,1.585)); +#152861 = LINE('',#152862,#152863); +#152862 = CARTESIAN_POINT('',(179.76085,-110.772919,1.585)); +#152863 = VECTOR('',#152864,1.); +#152864 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#152865 = ORIENTED_EDGE('',*,*,#152866,.T.); +#152866 = EDGE_CURVE('',#152859,#152867,#152869,.T.); +#152867 = VERTEX_POINT('',#152868); +#152868 = CARTESIAN_POINT('',(179.907334,-110.867382,1.585)); +#152869 = CIRCLE('',#152870,7.500029440469E-02); +#152870 = AXIS2_PLACEMENT_3D('',#152871,#152872,#152873); +#152871 = CARTESIAN_POINT('',(179.87379235132,-110.800299946,1.585)); +#152872 = DIRECTION('',(0.,0.,-1.)); +#152873 = DIRECTION('',(-0.264123647521,0.964488827732,-0.)); +#152874 = ORIENTED_EDGE('',*,*,#152875,.T.); +#152875 = EDGE_CURVE('',#152867,#152876,#152878,.T.); +#152876 = VERTEX_POINT('',#152877); +#152877 = CARTESIAN_POINT('',(179.793187,-110.921478,1.585)); +#152878 = LINE('',#152879,#152880); +#152879 = CARTESIAN_POINT('',(179.907334,-110.867382,1.585)); +#152880 = VECTOR('',#152881,1.); +#152881 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#152882 = ORIENTED_EDGE('',*,*,#152883,.T.); +#152883 = EDGE_CURVE('',#152876,#152884,#152886,.T.); +#152884 = VERTEX_POINT('',#152885); +#152885 = CARTESIAN_POINT('',(179.568269,-110.920256,1.585)); +#152886 = LINE('',#152887,#152888); +#152887 = CARTESIAN_POINT('',(179.793187,-110.921478,1.585)); +#152888 = VECTOR('',#152889,1.); +#152889 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#152890 = ORIENTED_EDGE('',*,*,#152891,.T.); +#152891 = EDGE_CURVE('',#152884,#152892,#152894,.T.); +#152892 = VERTEX_POINT('',#152893); +#152893 = CARTESIAN_POINT('',(179.446857,-110.85955,1.585)); +#152894 = LINE('',#152895,#152896); +#152895 = CARTESIAN_POINT('',(179.568269,-110.920256,1.585)); +#152896 = VECTOR('',#152897,1.); +#152897 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#152898 = ORIENTED_EDGE('',*,*,#152899,.T.); +#152899 = EDGE_CURVE('',#152892,#152900,#152902,.T.); +#152900 = VERTEX_POINT('',#152901); +#152901 = CARTESIAN_POINT('',(179.425759,-110.833841,1.585)); +#152902 = LINE('',#152903,#152904); +#152903 = CARTESIAN_POINT('',(179.446857,-110.85955,1.585)); +#152904 = VECTOR('',#152905,1.); +#152905 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#152906 = ORIENTED_EDGE('',*,*,#152907,.T.); +#152907 = EDGE_CURVE('',#152900,#152908,#152910,.T.); +#152908 = VERTEX_POINT('',#152909); +#152909 = CARTESIAN_POINT('',(179.371663,-110.719693,1.585)); +#152910 = LINE('',#152911,#152912); +#152911 = CARTESIAN_POINT('',(179.425759,-110.833841,1.585)); +#152912 = VECTOR('',#152913,1.); +#152913 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#152914 = ORIENTED_EDGE('',*,*,#152915,.T.); +#152915 = EDGE_CURVE('',#152908,#152916,#152918,.T.); +#152916 = VERTEX_POINT('',#152917); +#152917 = CARTESIAN_POINT('',(179.372885,-110.3043,1.585)); +#152918 = LINE('',#152919,#152920); +#152919 = CARTESIAN_POINT('',(179.371663,-110.719693,1.585)); +#152920 = VECTOR('',#152921,1.); +#152921 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#152922 = ORIENTED_EDGE('',*,*,#152923,.T.); +#152923 = EDGE_CURVE('',#152916,#152924,#152926,.T.); +#152924 = VERTEX_POINT('',#152925); +#152925 = CARTESIAN_POINT('',(179.433591,-110.182887,1.585)); +#152926 = LINE('',#152927,#152928); +#152927 = CARTESIAN_POINT('',(179.372885,-110.3043,1.585)); +#152928 = VECTOR('',#152929,1.); +#152929 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#152930 = ORIENTED_EDGE('',*,*,#152931,.T.); +#152931 = EDGE_CURVE('',#152924,#152768,#152932,.T.); +#152932 = LINE('',#152933,#152934); +#152933 = CARTESIAN_POINT('',(179.433591,-110.182887,1.585)); +#152934 = VECTOR('',#152935,1.); +#152935 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#152936 = FACE_BOUND('',#152937,.F.); +#152937 = EDGE_LOOP('',(#152938,#152949,#152957,#152965,#152973,#152981) + ); +#152938 = ORIENTED_EDGE('',*,*,#152939,.T.); +#152939 = EDGE_CURVE('',#152940,#152942,#152944,.T.); +#152940 = VERTEX_POINT('',#152941); +#152941 = CARTESIAN_POINT('',(179.817891,-110.284772,1.585)); +#152942 = VERTEX_POINT('',#152943); +#152943 = CARTESIAN_POINT('',(179.548742,-110.284772,1.585)); +#152944 = CIRCLE('',#152945,0.239283669194); +#152945 = AXIS2_PLACEMENT_3D('',#152946,#152947,#152948); +#152946 = CARTESIAN_POINT('',(179.6833165,-110.4826264371,1.585)); +#152947 = DIRECTION('',(0.,0.,1.)); +#152948 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#152949 = ORIENTED_EDGE('',*,*,#152950,.T.); +#152950 = EDGE_CURVE('',#152942,#152951,#152953,.T.); +#152951 = VERTEX_POINT('',#152952); +#152952 = CARTESIAN_POINT('',(179.520222,-110.341814,1.585)); +#152953 = LINE('',#152954,#152955); +#152954 = CARTESIAN_POINT('',(179.548742,-110.284772,1.585)); +#152955 = VECTOR('',#152956,1.); +#152956 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#152957 = ORIENTED_EDGE('',*,*,#152958,.T.); +#152958 = EDGE_CURVE('',#152951,#152959,#152961,.T.); +#152959 = VERTEX_POINT('',#152960); +#152960 = CARTESIAN_POINT('',(179.520222,-110.423099,1.585)); +#152961 = LINE('',#152962,#152963); +#152962 = CARTESIAN_POINT('',(179.520222,-110.341814,1.585)); +#152963 = VECTOR('',#152964,1.); +#152964 = DIRECTION('',(0.,-1.,0.)); +#152965 = ORIENTED_EDGE('',*,*,#152966,.T.); +#152966 = EDGE_CURVE('',#152959,#152967,#152969,.T.); +#152967 = VERTEX_POINT('',#152968); +#152968 = CARTESIAN_POINT('',(179.846412,-110.357862,1.585)); +#152969 = LINE('',#152970,#152971); +#152970 = CARTESIAN_POINT('',(179.520222,-110.423099,1.585)); +#152971 = VECTOR('',#152972,1.); +#152972 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#152973 = ORIENTED_EDGE('',*,*,#152974,.T.); +#152974 = EDGE_CURVE('',#152967,#152975,#152977,.T.); +#152975 = VERTEX_POINT('',#152976); +#152976 = CARTESIAN_POINT('',(179.846412,-110.341814,1.585)); +#152977 = LINE('',#152978,#152979); +#152978 = CARTESIAN_POINT('',(179.846412,-110.357862,1.585)); +#152979 = VECTOR('',#152980,1.); +#152980 = DIRECTION('',(0.,1.,0.)); +#152981 = ORIENTED_EDGE('',*,*,#152982,.T.); +#152982 = EDGE_CURVE('',#152975,#152940,#152983,.T.); +#152983 = LINE('',#152984,#152985); +#152984 = CARTESIAN_POINT('',(179.846412,-110.341814,1.585)); +#152985 = VECTOR('',#152986,1.); +#152986 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#152987 = PLANE('',#152988); +#152988 = AXIS2_PLACEMENT_3D('',#152989,#152990,#152991); +#152989 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152990 = DIRECTION('',(0.,0.,1.)); +#152991 = DIRECTION('',(1.,0.,-0.)); +#152992 = SHELL_BASED_SURFACE_MODEL('',(#152993)); +#152993 = OPEN_SHELL('',(#152994)); +#152994 = ADVANCED_FACE('',(#152995),#153072,.T.); +#152995 = FACE_BOUND('',#152996,.F.); +#152996 = EDGE_LOOP('',(#152997,#153008,#153016,#153024,#153033,#153041, + #153050,#153058,#153066)); +#152997 = ORIENTED_EDGE('',*,*,#152998,.T.); +#152998 = EDGE_CURVE('',#152999,#153001,#153003,.T.); +#152999 = VERTEX_POINT('',#153000); +#153000 = CARTESIAN_POINT('',(167.007125,-109.415559,1.585)); +#153001 = VERTEX_POINT('',#153002); +#153002 = CARTESIAN_POINT('',(167.123793,-109.477919,1.585)); +#153003 = CIRCLE('',#153004,7.500000000004E-02); +#153004 = AXIS2_PLACEMENT_3D('',#153005,#153006,#153007); +#153005 = CARTESIAN_POINT('',(167.048793,-109.4779190655,1.585)); +#153006 = DIRECTION('',(0.,0.,-1.)); +#153007 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#153008 = ORIENTED_EDGE('',*,*,#153009,.T.); +#153009 = EDGE_CURVE('',#153001,#153010,#153012,.T.); +#153010 = VERTEX_POINT('',#153011); +#153011 = CARTESIAN_POINT('',(167.123793,-110.402919,1.585)); +#153012 = LINE('',#153013,#153014); +#153013 = CARTESIAN_POINT('',(167.123793,-109.477919,1.585)); +#153014 = VECTOR('',#153015,1.); +#153015 = DIRECTION('',(0.,-1.,0.)); +#153016 = ORIENTED_EDGE('',*,*,#153017,.T.); +#153017 = EDGE_CURVE('',#153010,#153018,#153020,.T.); +#153018 = VERTEX_POINT('',#153019); +#153019 = CARTESIAN_POINT('',(167.539615,-110.40436,1.585)); +#153020 = LINE('',#153021,#153022); +#153021 = CARTESIAN_POINT('',(167.123793,-110.402919,1.585)); +#153022 = VECTOR('',#153023,1.); +#153023 = DIRECTION('',(0.999993995468,-3.465404301528E-03,0.)); +#153024 = ORIENTED_EDGE('',*,*,#153025,.T.); +#153025 = EDGE_CURVE('',#153018,#153026,#153028,.T.); +#153026 = VERTEX_POINT('',#153027); +#153027 = CARTESIAN_POINT('',(167.524983,-110.552919,1.585)); +#153028 = CIRCLE('',#153029,7.500006711465E-02); +#153029 = AXIS2_PLACEMENT_3D('',#153030,#153031,#153032); +#153030 = CARTESIAN_POINT('',(167.52498306711,-110.4779189328,1.585)); +#153031 = DIRECTION('',(0.,0.,-1.)); +#153032 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#153033 = ORIENTED_EDGE('',*,*,#153034,.T.); +#153034 = EDGE_CURVE('',#153026,#153035,#153037,.T.); +#153035 = VERTEX_POINT('',#153036); +#153036 = CARTESIAN_POINT('',(167.034161,-110.551478,1.585)); +#153037 = LINE('',#153038,#153039); +#153038 = CARTESIAN_POINT('',(167.524983,-110.552919,1.585)); +#153039 = VECTOR('',#153040,1.); +#153040 = DIRECTION('',(-0.999995690299,2.935878566407E-03,0.)); +#153041 = ORIENTED_EDGE('',*,*,#153042,.T.); +#153042 = EDGE_CURVE('',#153035,#153043,#153045,.T.); +#153043 = VERTEX_POINT('',#153044); +#153044 = CARTESIAN_POINT('',(166.973793,-110.477919,1.585)); +#153045 = CIRCLE('',#153046,7.500074938989E-02); +#153046 = AXIS2_PLACEMENT_3D('',#153047,#153048,#153049); +#153047 = CARTESIAN_POINT('',(167.04879374938,-110.4779185338,1.585)); +#153048 = DIRECTION('',(0.,0.,-1.)); +#153049 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#153050 = ORIENTED_EDGE('',*,*,#153051,.T.); +#153051 = EDGE_CURVE('',#153043,#153052,#153054,.T.); +#153052 = VERTEX_POINT('',#153053); +#153053 = CARTESIAN_POINT('',(166.975234,-109.463287,1.585)); +#153054 = LINE('',#153055,#153056); +#153055 = CARTESIAN_POINT('',(166.973793,-110.477919,1.585)); +#153056 = VECTOR('',#153057,1.); +#153057 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#153058 = ORIENTED_EDGE('',*,*,#153059,.T.); +#153059 = EDGE_CURVE('',#153052,#153060,#153062,.T.); +#153060 = VERTEX_POINT('',#153061); +#153061 = CARTESIAN_POINT('',(166.986433,-109.436251,1.585)); +#153062 = LINE('',#153063,#153064); +#153063 = CARTESIAN_POINT('',(166.975234,-109.463287,1.585)); +#153064 = VECTOR('',#153065,1.); +#153065 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#153066 = ORIENTED_EDGE('',*,*,#153067,.T.); +#153067 = EDGE_CURVE('',#153060,#152999,#153068,.T.); +#153068 = LINE('',#153069,#153070); +#153069 = CARTESIAN_POINT('',(166.986433,-109.436251,1.585)); +#153070 = VECTOR('',#153071,1.); +#153071 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#153072 = PLANE('',#153073); +#153073 = AXIS2_PLACEMENT_3D('',#153074,#153075,#153076); +#153074 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153075 = DIRECTION('',(0.,0.,1.)); +#153076 = DIRECTION('',(1.,0.,-0.)); +#153077 = SHELL_BASED_SURFACE_MODEL('',(#153078)); +#153078 = OPEN_SHELL('',(#153079)); +#153079 = ADVANCED_FACE('',(#153080,#153223),#153293,.T.); +#153080 = FACE_BOUND('',#153081,.F.); +#153081 = EDGE_LOOP('',(#153082,#153093,#153101,#153109,#153118,#153126, + #153134,#153142,#153150,#153158,#153166,#153174,#153183,#153191, + #153200,#153208,#153217)); +#153082 = ORIENTED_EDGE('',*,*,#153083,.T.); +#153083 = EDGE_CURVE('',#153084,#153086,#153088,.T.); +#153084 = VERTEX_POINT('',#153085); +#153085 = CARTESIAN_POINT('',(167.737937,-109.8883,1.585)); +#153086 = VERTEX_POINT('',#153087); +#153087 = CARTESIAN_POINT('',(167.967633,-109.458456,1.585)); +#153088 = CIRCLE('',#153089,0.610092147705); +#153089 = AXIS2_PLACEMENT_3D('',#153090,#153091,#153092); +#153090 = CARTESIAN_POINT('',(168.34608374024,-109.9369823481,1.585)); +#153091 = DIRECTION('',(0.,0.,-1.)); +#153092 = DIRECTION('',(-0.99681128913,7.979507417375E-02,0.)); +#153093 = ORIENTED_EDGE('',*,*,#153094,.T.); +#153094 = EDGE_CURVE('',#153086,#153095,#153097,.T.); +#153095 = VERTEX_POINT('',#153096); +#153096 = CARTESIAN_POINT('',(168.08178,-109.40436,1.585)); +#153097 = LINE('',#153098,#153099); +#153098 = CARTESIAN_POINT('',(167.967633,-109.458456,1.585)); +#153099 = VECTOR('',#153100,1.); +#153100 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#153101 = ORIENTED_EDGE('',*,*,#153102,.T.); +#153102 = EDGE_CURVE('',#153095,#153103,#153105,.T.); +#153103 = VERTEX_POINT('',#153104); +#153104 = CARTESIAN_POINT('',(168.30152,-109.40436,1.585)); +#153105 = LINE('',#153106,#153107); +#153106 = CARTESIAN_POINT('',(168.08178,-109.40436,1.585)); +#153107 = VECTOR('',#153108,1.); +#153108 = DIRECTION('',(1.,0.,0.)); +#153109 = ORIENTED_EDGE('',*,*,#153110,.T.); +#153110 = EDGE_CURVE('',#153103,#153111,#153113,.T.); +#153111 = VERTEX_POINT('',#153112); +#153112 = CARTESIAN_POINT('',(168.286888,-109.552919,1.585)); +#153113 = CIRCLE('',#153114,7.500006711464E-02); +#153114 = AXIS2_PLACEMENT_3D('',#153115,#153116,#153117); +#153115 = CARTESIAN_POINT('',(168.28688806711,-109.4779189328,1.585)); +#153116 = DIRECTION('',(0.,0.,-1.)); +#153117 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#153118 = ORIENTED_EDGE('',*,*,#153119,.T.); +#153119 = EDGE_CURVE('',#153111,#153120,#153122,.T.); +#153120 = VERTEX_POINT('',#153121); +#153121 = CARTESIAN_POINT('',(168.114117,-109.552919,1.585)); +#153122 = LINE('',#153123,#153124); +#153123 = CARTESIAN_POINT('',(168.286888,-109.552919,1.585)); +#153124 = VECTOR('',#153125,1.); +#153125 = DIRECTION('',(-1.,0.,0.)); +#153126 = ORIENTED_EDGE('',*,*,#153127,.T.); +#153127 = EDGE_CURVE('',#153120,#153128,#153130,.T.); +#153128 = VERTEX_POINT('',#153129); +#153129 = CARTESIAN_POINT('',(168.045601,-109.587177,1.585)); +#153130 = LINE('',#153131,#153132); +#153131 = CARTESIAN_POINT('',(168.114117,-109.552919,1.585)); +#153132 = VECTOR('',#153133,1.); +#153133 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#153134 = ORIENTED_EDGE('',*,*,#153135,.T.); +#153135 = EDGE_CURVE('',#153128,#153136,#153138,.T.); +#153136 = VERTEX_POINT('',#153137); +#153137 = CARTESIAN_POINT('',(168.011839,-109.620938,1.585)); +#153138 = LINE('',#153139,#153140); +#153139 = CARTESIAN_POINT('',(168.045601,-109.587177,1.585)); +#153140 = VECTOR('',#153141,1.); +#153141 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#153142 = ORIENTED_EDGE('',*,*,#153143,.T.); +#153143 = EDGE_CURVE('',#153136,#153144,#153146,.T.); +#153144 = VERTEX_POINT('',#153145); +#153145 = CARTESIAN_POINT('',(167.927927,-109.746807,1.585)); +#153146 = LINE('',#153147,#153148); +#153147 = CARTESIAN_POINT('',(168.011839,-109.620938,1.585)); +#153148 = VECTOR('',#153149,1.); +#153149 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#153150 = ORIENTED_EDGE('',*,*,#153151,.T.); +#153151 = EDGE_CURVE('',#153144,#153152,#153154,.T.); +#153152 = VERTEX_POINT('',#153153); +#153153 = CARTESIAN_POINT('',(167.909403,-109.820904,1.585)); +#153154 = LINE('',#153155,#153156); +#153155 = CARTESIAN_POINT('',(167.927927,-109.746807,1.585)); +#153156 = VECTOR('',#153157,1.); +#153157 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#153158 = ORIENTED_EDGE('',*,*,#153159,.T.); +#153159 = EDGE_CURVE('',#153152,#153160,#153162,.T.); +#153160 = VERTEX_POINT('',#153161); +#153161 = CARTESIAN_POINT('',(167.986542,-109.785312,1.585)); +#153162 = LINE('',#153163,#153164); +#153163 = CARTESIAN_POINT('',(167.909403,-109.820904,1.585)); +#153164 = VECTOR('',#153165,1.); +#153165 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#153166 = ORIENTED_EDGE('',*,*,#153167,.T.); +#153167 = EDGE_CURVE('',#153160,#153168,#153170,.T.); +#153168 = VERTEX_POINT('',#153169); +#153169 = CARTESIAN_POINT('',(168.211459,-109.786534,1.585)); +#153170 = LINE('',#153171,#153172); +#153171 = CARTESIAN_POINT('',(167.986542,-109.785312,1.585)); +#153172 = VECTOR('',#153173,1.); +#153173 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#153174 = ORIENTED_EDGE('',*,*,#153175,.T.); +#153175 = EDGE_CURVE('',#153168,#153176,#153178,.T.); +#153176 = VERTEX_POINT('',#153177); +#153177 = CARTESIAN_POINT('',(168.455685,-110.034715,1.585)); +#153178 = CIRCLE('',#153179,0.348625649748); +#153179 = AXIS2_PLACEMENT_3D('',#153180,#153181,#153182); +#153180 = CARTESIAN_POINT('',(168.11828704586,-110.1224786838,1.585)); +#153181 = DIRECTION('',(0.,0.,-1.)); +#153182 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#153183 = ORIENTED_EDGE('',*,*,#153184,.T.); +#153184 = EDGE_CURVE('',#153176,#153185,#153187,.T.); +#153185 = VERTEX_POINT('',#153186); +#153186 = CARTESIAN_POINT('',(168.454463,-110.307252,1.585)); +#153187 = LINE('',#153188,#153189); +#153188 = CARTESIAN_POINT('',(168.455685,-110.034715,1.585)); +#153189 = VECTOR('',#153190,1.); +#153190 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#153191 = ORIENTED_EDGE('',*,*,#153192,.T.); +#153192 = EDGE_CURVE('',#153185,#153193,#153195,.T.); +#153193 = VERTEX_POINT('',#153194); +#153194 = CARTESIAN_POINT('',(168.206282,-110.551478,1.585)); +#153195 = CIRCLE('',#153196,0.348635327447); +#153196 = AXIS2_PLACEMENT_3D('',#153197,#153198,#153199); +#153197 = CARTESIAN_POINT('',(168.11851048129,-110.2140720841,1.585)); +#153198 = DIRECTION('',(0.,0.,-1.)); +#153199 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#153200 = ORIENTED_EDGE('',*,*,#153201,.T.); +#153201 = EDGE_CURVE('',#153193,#153202,#153204,.T.); +#153202 = VERTEX_POINT('',#153203); +#153203 = CARTESIAN_POINT('',(167.981364,-110.550256,1.585)); +#153204 = LINE('',#153205,#153206); +#153205 = CARTESIAN_POINT('',(168.206282,-110.551478,1.585)); +#153206 = VECTOR('',#153207,1.); +#153207 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#153208 = ORIENTED_EDGE('',*,*,#153209,.T.); +#153209 = EDGE_CURVE('',#153202,#153210,#153212,.T.); +#153210 = VERTEX_POINT('',#153211); +#153211 = CARTESIAN_POINT('',(167.737139,-110.302074,1.585)); +#153212 = CIRCLE('',#153213,0.348628446662); +#153213 = AXIS2_PLACEMENT_3D('',#153214,#153215,#153216); +#153214 = CARTESIAN_POINT('',(168.07453961322,-110.2143094284,1.585)); +#153215 = DIRECTION('',(0.,0.,-1.)); +#153216 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#153217 = ORIENTED_EDGE('',*,*,#153218,.T.); +#153218 = EDGE_CURVE('',#153210,#153084,#153219,.T.); +#153219 = LINE('',#153220,#153221); +#153220 = CARTESIAN_POINT('',(167.737139,-110.302074,1.585)); +#153221 = VECTOR('',#153222,1.); +#153222 = DIRECTION('',(1.928585449825E-03,0.999998140277,0.)); +#153223 = FACE_BOUND('',#153224,.F.); +#153224 = EDGE_LOOP('',(#153225,#153236,#153244,#153253,#153261,#153270, + #153278,#153287)); +#153225 = ORIENTED_EDGE('',*,*,#153226,.T.); +#153226 = EDGE_CURVE('',#153227,#153229,#153231,.T.); +#153227 = VERTEX_POINT('',#153228); +#153228 = CARTESIAN_POINT('',(168.242461,-109.968129,1.585)); +#153229 = VERTEX_POINT('',#153230); +#153230 = CARTESIAN_POINT('',(167.950363,-109.968129,1.585)); +#153231 = CIRCLE('',#153232,0.252889603602); +#153232 = AXIS2_PLACEMENT_3D('',#153233,#153234,#153235); +#153233 = CARTESIAN_POINT('',(168.096412,-110.174582,1.585)); +#153234 = DIRECTION('',(0.,0.,1.)); +#153235 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#153236 = ORIENTED_EDGE('',*,*,#153237,.T.); +#153237 = EDGE_CURVE('',#153229,#153238,#153240,.T.); +#153238 = VERTEX_POINT('',#153239); +#153239 = CARTESIAN_POINT('',(167.919956,-109.998536,1.585)); +#153240 = LINE('',#153241,#153242); +#153241 = CARTESIAN_POINT('',(167.950363,-109.968129,1.585)); +#153242 = VECTOR('',#153243,1.); +#153243 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#153244 = ORIENTED_EDGE('',*,*,#153245,.T.); +#153245 = EDGE_CURVE('',#153238,#153246,#153248,.T.); +#153246 = VERTEX_POINT('',#153247); +#153247 = CARTESIAN_POINT('',(167.919956,-110.338253,1.585)); +#153248 = CIRCLE('',#153249,0.305621483548); +#153249 = AXIS2_PLACEMENT_3D('',#153250,#153251,#153252); +#153250 = CARTESIAN_POINT('',(168.174028,-110.1683945,1.585)); +#153251 = DIRECTION('',(0.,0.,1.)); +#153252 = DIRECTION('',(-0.831328992485,0.555780627815,0.)); +#153253 = ORIENTED_EDGE('',*,*,#153254,.T.); +#153254 = EDGE_CURVE('',#153246,#153255,#153257,.T.); +#153255 = VERTEX_POINT('',#153256); +#153256 = CARTESIAN_POINT('',(167.950363,-110.368661,1.585)); +#153257 = LINE('',#153258,#153259); +#153258 = CARTESIAN_POINT('',(167.919956,-110.338253,1.585)); +#153259 = VECTOR('',#153260,1.); +#153260 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#153261 = ORIENTED_EDGE('',*,*,#153262,.T.); +#153262 = EDGE_CURVE('',#153255,#153263,#153265,.T.); +#153263 = VERTEX_POINT('',#153264); +#153264 = CARTESIAN_POINT('',(168.24246,-110.368661,1.585)); +#153265 = CIRCLE('',#153266,0.252888498466); +#153266 = AXIS2_PLACEMENT_3D('',#153267,#153268,#153269); +#153267 = CARTESIAN_POINT('',(168.0964115,-110.162209,1.585)); +#153268 = DIRECTION('',(0.,0.,1.)); +#153269 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#153270 = ORIENTED_EDGE('',*,*,#153271,.T.); +#153271 = EDGE_CURVE('',#153263,#153272,#153274,.T.); +#153272 = VERTEX_POINT('',#153273); +#153273 = CARTESIAN_POINT('',(168.272867,-110.338253,1.585)); +#153274 = LINE('',#153275,#153276); +#153275 = CARTESIAN_POINT('',(168.24246,-110.368661,1.585)); +#153276 = VECTOR('',#153277,1.); +#153277 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#153278 = ORIENTED_EDGE('',*,*,#153279,.T.); +#153279 = EDGE_CURVE('',#153272,#153280,#153282,.T.); +#153280 = VERTEX_POINT('',#153281); +#153281 = CARTESIAN_POINT('',(168.272868,-109.998536,1.585)); +#153282 = CIRCLE('',#153283,0.305616146029); +#153283 = AXIS2_PLACEMENT_3D('',#153284,#153285,#153286); +#153284 = CARTESIAN_POINT('',(168.01880192049,-110.1683937521,1.585)); +#153285 = DIRECTION('',(0.,-0.,1.)); +#153286 = DIRECTION('',(0.83132086707,-0.555792781505,-0.)); +#153287 = ORIENTED_EDGE('',*,*,#153288,.T.); +#153288 = EDGE_CURVE('',#153280,#153227,#153289,.T.); +#153289 = LINE('',#153290,#153291); +#153290 = CARTESIAN_POINT('',(168.272868,-109.998536,1.585)); +#153291 = VECTOR('',#153292,1.); +#153292 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#153293 = PLANE('',#153294); +#153294 = AXIS2_PLACEMENT_3D('',#153295,#153296,#153297); +#153295 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153296 = DIRECTION('',(0.,0.,1.)); +#153297 = DIRECTION('',(1.,0.,-0.)); +#153298 = SHELL_BASED_SURFACE_MODEL('',(#153299)); +#153299 = OPEN_SHELL('',(#153300)); +#153300 = ADVANCED_FACE('',(#153301),#153337,.T.); +#153301 = FACE_BOUND('',#153302,.F.); +#153302 = EDGE_LOOP('',(#153303,#153314,#153322,#153331)); +#153303 = ORIENTED_EDGE('',*,*,#153304,.T.); +#153304 = EDGE_CURVE('',#153305,#153307,#153309,.T.); +#153305 = VERTEX_POINT('',#153306); +#153306 = CARTESIAN_POINT('',(187.77607,-110.3931,1.585)); +#153307 = VERTEX_POINT('',#153308); +#153308 = CARTESIAN_POINT('',(187.77607,-110.2731,1.585)); +#153309 = CIRCLE('',#153310,6.000000000043E-02); +#153310 = AXIS2_PLACEMENT_3D('',#153311,#153312,#153313); +#153311 = CARTESIAN_POINT('',(187.77606977441,-110.3331,1.585)); +#153312 = DIRECTION('',(0.,0.,-1.)); +#153313 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#153314 = ORIENTED_EDGE('',*,*,#153315,.T.); +#153315 = EDGE_CURVE('',#153307,#153316,#153318,.T.); +#153316 = VERTEX_POINT('',#153317); +#153317 = CARTESIAN_POINT('',(188.05723,-110.2731,1.585)); +#153318 = LINE('',#153319,#153320); +#153319 = CARTESIAN_POINT('',(187.77607,-110.2731,1.585)); +#153320 = VECTOR('',#153321,1.); +#153321 = DIRECTION('',(1.,0.,0.)); +#153322 = ORIENTED_EDGE('',*,*,#153323,.T.); +#153323 = EDGE_CURVE('',#153316,#153324,#153326,.T.); +#153324 = VERTEX_POINT('',#153325); +#153325 = CARTESIAN_POINT('',(188.05723,-110.3931,1.585)); +#153326 = CIRCLE('',#153327,6.000000000043E-02); +#153327 = AXIS2_PLACEMENT_3D('',#153328,#153329,#153330); +#153328 = CARTESIAN_POINT('',(188.05723022558,-110.3331,1.585)); +#153329 = DIRECTION('',(0.,0.,-1.)); +#153330 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#153331 = ORIENTED_EDGE('',*,*,#153332,.T.); +#153332 = EDGE_CURVE('',#153324,#153305,#153333,.T.); +#153333 = LINE('',#153334,#153335); +#153334 = CARTESIAN_POINT('',(188.05723,-110.3931,1.585)); +#153335 = VECTOR('',#153336,1.); +#153336 = DIRECTION('',(-1.,0.,0.)); +#153337 = PLANE('',#153338); +#153338 = AXIS2_PLACEMENT_3D('',#153339,#153340,#153341); +#153339 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153340 = DIRECTION('',(0.,0.,1.)); +#153341 = DIRECTION('',(1.,0.,-0.)); +#153342 = SHELL_BASED_SURFACE_MODEL('',(#153343)); +#153343 = OPEN_SHELL('',(#153344)); +#153344 = ADVANCED_FACE('',(#153345),#153431,.T.); +#153345 = FACE_BOUND('',#153346,.F.); +#153346 = EDGE_LOOP('',(#153347,#153358,#153366,#153375,#153383,#153392, + #153400,#153408,#153416,#153425)); +#153347 = ORIENTED_EDGE('',*,*,#153348,.T.); +#153348 = EDGE_CURVE('',#153349,#153351,#153353,.T.); +#153349 = VERTEX_POINT('',#153350); +#153350 = CARTESIAN_POINT('',(195.50165,-110.0131,1.585)); +#153351 = VERTEX_POINT('',#153352); +#153352 = CARTESIAN_POINT('',(195.56165,-109.9531,1.585)); +#153353 = CIRCLE('',#153354,5.999932016253E-02); +#153354 = AXIS2_PLACEMENT_3D('',#153355,#153356,#153357); +#153355 = CARTESIAN_POINT('',(195.56164932015,-110.0130993201,1.585)); +#153356 = DIRECTION('',(0.,0.,-1.)); +#153357 = DIRECTION('',(-0.999999999936,-1.133081683199E-05,-0.)); +#153358 = ORIENTED_EDGE('',*,*,#153359,.T.); +#153359 = EDGE_CURVE('',#153351,#153360,#153362,.T.); +#153360 = VERTEX_POINT('',#153361); +#153361 = CARTESIAN_POINT('',(199.68165,-109.9531,1.585)); +#153362 = LINE('',#153363,#153364); +#153363 = CARTESIAN_POINT('',(195.56165,-109.9531,1.585)); +#153364 = VECTOR('',#153365,1.); +#153365 = DIRECTION('',(1.,0.,0.)); +#153366 = ORIENTED_EDGE('',*,*,#153367,.T.); +#153367 = EDGE_CURVE('',#153360,#153368,#153370,.T.); +#153368 = VERTEX_POINT('',#153369); +#153369 = CARTESIAN_POINT('',(199.74165,-110.0131,1.585)); +#153370 = CIRCLE('',#153371,5.999932016257E-02); +#153371 = AXIS2_PLACEMENT_3D('',#153372,#153373,#153374); +#153372 = CARTESIAN_POINT('',(199.68165067984,-110.0130993201,1.585)); +#153373 = DIRECTION('',(0.,0.,-1.)); +#153374 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#153375 = ORIENTED_EDGE('',*,*,#153376,.T.); +#153376 = EDGE_CURVE('',#153368,#153377,#153379,.T.); +#153377 = VERTEX_POINT('',#153378); +#153378 = CARTESIAN_POINT('',(199.74165,-110.1081,1.585)); +#153379 = LINE('',#153380,#153381); +#153380 = CARTESIAN_POINT('',(199.74165,-110.0131,1.585)); +#153381 = VECTOR('',#153382,1.); +#153382 = DIRECTION('',(0.,-1.,0.)); +#153383 = ORIENTED_EDGE('',*,*,#153384,.T.); +#153384 = EDGE_CURVE('',#153377,#153385,#153387,.T.); +#153385 = VERTEX_POINT('',#153386); +#153386 = CARTESIAN_POINT('',(199.626217,-110.131061,1.585)); +#153387 = CIRCLE('',#153388,6.000007318647E-02); +#153388 = AXIS2_PLACEMENT_3D('',#153389,#153390,#153391); +#153389 = CARTESIAN_POINT('',(199.68164992681,-110.1081001766,1.585)); +#153390 = DIRECTION('',(0.,0.,-1.)); +#153391 = DIRECTION('',(0.999999999996,2.944769722129E-06,0.)); +#153392 = ORIENTED_EDGE('',*,*,#153393,.T.); +#153393 = EDGE_CURVE('',#153385,#153394,#153396,.T.); +#153394 = VERTEX_POINT('',#153395); +#153395 = CARTESIAN_POINT('',(199.62165,-110.0731,1.585)); +#153396 = LINE('',#153397,#153398); +#153397 = CARTESIAN_POINT('',(199.626217,-110.131061,1.585)); +#153398 = VECTOR('',#153399,1.); +#153399 = DIRECTION('',(-7.855089539735E-02,0.99691010469,0.)); +#153400 = ORIENTED_EDGE('',*,*,#153401,.T.); +#153401 = EDGE_CURVE('',#153394,#153402,#153404,.T.); +#153402 = VERTEX_POINT('',#153403); +#153403 = CARTESIAN_POINT('',(195.62165,-110.0731,1.585)); +#153404 = LINE('',#153405,#153406); +#153405 = CARTESIAN_POINT('',(199.62165,-110.0731,1.585)); +#153406 = VECTOR('',#153407,1.); +#153407 = DIRECTION('',(-1.,0.,0.)); +#153408 = ORIENTED_EDGE('',*,*,#153409,.T.); +#153409 = EDGE_CURVE('',#153402,#153410,#153412,.T.); +#153410 = VERTEX_POINT('',#153411); +#153411 = CARTESIAN_POINT('',(195.617083,-110.131061,1.585)); +#153412 = LINE('',#153413,#153414); +#153413 = CARTESIAN_POINT('',(195.62165,-110.0731,1.585)); +#153414 = VECTOR('',#153415,1.); +#153415 = DIRECTION('',(-7.855089539686E-02,-0.99691010469,0.)); +#153416 = ORIENTED_EDGE('',*,*,#153417,.T.); +#153417 = EDGE_CURVE('',#153410,#153418,#153420,.T.); +#153418 = VERTEX_POINT('',#153419); +#153419 = CARTESIAN_POINT('',(195.50165,-110.1081,1.585)); +#153420 = CIRCLE('',#153421,6.000007318647E-02); +#153421 = AXIS2_PLACEMENT_3D('',#153422,#153423,#153424); +#153422 = CARTESIAN_POINT('',(195.56165007318,-110.1081001766,1.585)); +#153423 = DIRECTION('',(-0.,0.,-1.)); +#153424 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#153425 = ORIENTED_EDGE('',*,*,#153426,.T.); +#153426 = EDGE_CURVE('',#153418,#153349,#153427,.T.); +#153427 = LINE('',#153428,#153429); +#153428 = CARTESIAN_POINT('',(195.50165,-110.1081,1.585)); +#153429 = VECTOR('',#153430,1.); +#153430 = DIRECTION('',(0.,1.,0.)); +#153431 = PLANE('',#153432); +#153432 = AXIS2_PLACEMENT_3D('',#153433,#153434,#153435); +#153433 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153434 = DIRECTION('',(0.,0.,1.)); +#153435 = DIRECTION('',(1.,0.,-0.)); +#153436 = SHELL_BASED_SURFACE_MODEL('',(#153437)); +#153437 = OPEN_SHELL('',(#153438)); +#153438 = ADVANCED_FACE('',(#153439,#153619),#153687,.T.); +#153439 = FACE_BOUND('',#153440,.F.); +#153440 = EDGE_LOOP('',(#153441,#153452,#153460,#153468,#153476,#153484, + #153492,#153500,#153508,#153516,#153524,#153532,#153540,#153548, + #153556,#153564,#153572,#153580,#153588,#153597,#153605,#153613)); +#153441 = ORIENTED_EDGE('',*,*,#153442,.T.); +#153442 = EDGE_CURVE('',#153443,#153445,#153447,.T.); +#153443 = VERTEX_POINT('',#153444); +#153444 = CARTESIAN_POINT('',(126.086489,-107.53888,1.585)); +#153445 = VERTEX_POINT('',#153446); +#153446 = CARTESIAN_POINT('',(126.225381,-107.53888,1.585)); +#153447 = CIRCLE('',#153448,0.125001800942); +#153448 = AXIS2_PLACEMENT_3D('',#153449,#153450,#153451); +#153449 = CARTESIAN_POINT('',(126.155935,-107.642816054,1.585)); +#153450 = DIRECTION('',(0.,0.,-1.)); +#153451 = DIRECTION('',(-0.55555999575,0.831476452536,0.)); +#153452 = ORIENTED_EDGE('',*,*,#153453,.T.); +#153453 = EDGE_CURVE('',#153445,#153454,#153456,.T.); +#153454 = VERTEX_POINT('',#153455); +#153455 = CARTESIAN_POINT('',(126.235495,-107.548994,1.585)); +#153456 = LINE('',#153457,#153458); +#153457 = CARTESIAN_POINT('',(126.225381,-107.53888,1.585)); +#153458 = VECTOR('',#153459,1.); +#153459 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#153460 = ORIENTED_EDGE('',*,*,#153461,.T.); +#153461 = EDGE_CURVE('',#153454,#153462,#153464,.T.); +#153462 = VERTEX_POINT('',#153463); +#153463 = CARTESIAN_POINT('',(126.302978,-107.520216,1.585)); +#153464 = LINE('',#153465,#153466); +#153465 = CARTESIAN_POINT('',(126.235495,-107.548994,1.585)); +#153466 = VECTOR('',#153467,1.); +#153467 = DIRECTION('',(0.919850708094,0.39226862584,0.)); +#153468 = ORIENTED_EDGE('',*,*,#153469,.T.); +#153469 = EDGE_CURVE('',#153462,#153470,#153472,.T.); +#153470 = VERTEX_POINT('',#153471); +#153471 = CARTESIAN_POINT('',(126.694607,-107.520216,1.585)); +#153472 = LINE('',#153473,#153474); +#153473 = CARTESIAN_POINT('',(126.302978,-107.520216,1.585)); +#153474 = VECTOR('',#153475,1.); +#153475 = DIRECTION('',(1.,0.,0.)); +#153476 = ORIENTED_EDGE('',*,*,#153477,.T.); +#153477 = EDGE_CURVE('',#153470,#153478,#153480,.T.); +#153478 = VERTEX_POINT('',#153479); +#153479 = CARTESIAN_POINT('',(126.726123,-107.531011,1.585)); +#153480 = LINE('',#153481,#153482); +#153481 = CARTESIAN_POINT('',(126.694607,-107.520216,1.585)); +#153482 = VECTOR('',#153483,1.); +#153483 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#153484 = ORIENTED_EDGE('',*,*,#153485,.T.); +#153485 = EDGE_CURVE('',#153478,#153486,#153488,.T.); +#153486 = VERTEX_POINT('',#153487); +#153487 = CARTESIAN_POINT('',(126.918288,-107.629779,1.585)); +#153488 = LINE('',#153489,#153490); +#153489 = CARTESIAN_POINT('',(126.726123,-107.531011,1.585)); +#153490 = VECTOR('',#153491,1.); +#153491 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#153492 = ORIENTED_EDGE('',*,*,#153493,.T.); +#153493 = EDGE_CURVE('',#153486,#153494,#153496,.T.); +#153494 = VERTEX_POINT('',#153495); +#153495 = CARTESIAN_POINT('',(127.031297,-107.744795,1.585)); +#153496 = LINE('',#153497,#153498); +#153497 = CARTESIAN_POINT('',(126.918288,-107.629779,1.585)); +#153498 = VECTOR('',#153499,1.); +#153499 = DIRECTION('',(0.700855916236,-0.713302870229,0.)); +#153500 = ORIENTED_EDGE('',*,*,#153501,.T.); +#153501 = EDGE_CURVE('',#153494,#153502,#153504,.T.); +#153502 = VERTEX_POINT('',#153503); +#153503 = CARTESIAN_POINT('',(127.133639,-107.952655,1.585)); +#153504 = LINE('',#153505,#153506); +#153505 = CARTESIAN_POINT('',(127.031297,-107.744795,1.585)); +#153506 = VECTOR('',#153507,1.); +#153507 = DIRECTION('',(0.44172197285,-0.897151993088,0.)); +#153508 = ORIENTED_EDGE('',*,*,#153509,.T.); +#153509 = EDGE_CURVE('',#153502,#153510,#153512,.T.); +#153510 = VERTEX_POINT('',#153511); +#153511 = CARTESIAN_POINT('',(127.138078,-107.985671,1.585)); +#153512 = LINE('',#153513,#153514); +#153513 = CARTESIAN_POINT('',(127.133639,-107.952655,1.585)); +#153514 = VECTOR('',#153515,1.); +#153515 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#153516 = ORIENTED_EDGE('',*,*,#153517,.T.); +#153517 = EDGE_CURVE('',#153510,#153518,#153520,.T.); +#153518 = VERTEX_POINT('',#153519); +#153519 = CARTESIAN_POINT('',(127.135676,-108.524343,1.585)); +#153520 = LINE('',#153521,#153522); +#153521 = CARTESIAN_POINT('',(127.138078,-107.985671,1.585)); +#153522 = VECTOR('',#153523,1.); +#153523 = DIRECTION('',(-4.459069934991E-03,-0.999990058298,0.)); +#153524 = ORIENTED_EDGE('',*,*,#153525,.T.); +#153525 = EDGE_CURVE('',#153518,#153526,#153528,.T.); +#153526 = VERTEX_POINT('',#153527); +#153527 = CARTESIAN_POINT('',(127.124881,-108.555859,1.585)); +#153528 = LINE('',#153529,#153530); +#153529 = CARTESIAN_POINT('',(127.135676,-108.524343,1.585)); +#153530 = VECTOR('',#153531,1.); +#153531 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#153532 = ORIENTED_EDGE('',*,*,#153533,.T.); +#153533 = EDGE_CURVE('',#153526,#153534,#153536,.T.); +#153534 = VERTEX_POINT('',#153535); +#153535 = CARTESIAN_POINT('',(127.026113,-108.748024,1.585)); +#153536 = LINE('',#153537,#153538); +#153537 = CARTESIAN_POINT('',(127.124881,-108.555859,1.585)); +#153538 = VECTOR('',#153539,1.); +#153539 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#153540 = ORIENTED_EDGE('',*,*,#153541,.T.); +#153541 = EDGE_CURVE('',#153534,#153542,#153544,.T.); +#153542 = VERTEX_POINT('',#153543); +#153543 = CARTESIAN_POINT('',(126.911095,-108.861033,1.585)); +#153544 = LINE('',#153545,#153546); +#153545 = CARTESIAN_POINT('',(127.026113,-108.748024,1.585)); +#153546 = VECTOR('',#153547,1.); +#153547 = DIRECTION('',(-0.713308962756,-0.700849715454,0.)); +#153548 = ORIENTED_EDGE('',*,*,#153549,.T.); +#153549 = EDGE_CURVE('',#153542,#153550,#153552,.T.); +#153550 = VERTEX_POINT('',#153551); +#153551 = CARTESIAN_POINT('',(126.703237,-108.963375,1.585)); +#153552 = LINE('',#153553,#153554); +#153553 = CARTESIAN_POINT('',(126.911095,-108.861033,1.585)); +#153554 = VECTOR('',#153555,1.); +#153555 = DIRECTION('',(-0.897150308754,-0.441725393771,0.)); +#153556 = ORIENTED_EDGE('',*,*,#153557,.T.); +#153557 = EDGE_CURVE('',#153550,#153558,#153560,.T.); +#153558 = VERTEX_POINT('',#153559); +#153559 = CARTESIAN_POINT('',(126.670221,-108.967814,1.585)); +#153560 = LINE('',#153561,#153562); +#153561 = CARTESIAN_POINT('',(126.703237,-108.963375,1.585)); +#153562 = VECTOR('',#153563,1.); +#153563 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#153564 = ORIENTED_EDGE('',*,*,#153565,.T.); +#153565 = EDGE_CURVE('',#153558,#153566,#153568,.T.); +#153566 = VERTEX_POINT('',#153567); +#153567 = CARTESIAN_POINT('',(126.302978,-108.965412,1.585)); +#153568 = LINE('',#153569,#153570); +#153569 = CARTESIAN_POINT('',(126.670221,-108.967814,1.585)); +#153570 = VECTOR('',#153571,1.); +#153571 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#153572 = ORIENTED_EDGE('',*,*,#153573,.T.); +#153573 = EDGE_CURVE('',#153566,#153574,#153576,.T.); +#153574 = VERTEX_POINT('',#153575); +#153575 = CARTESIAN_POINT('',(126.280935,-108.958242,1.585)); +#153576 = LINE('',#153577,#153578); +#153577 = CARTESIAN_POINT('',(126.302978,-108.965412,1.585)); +#153578 = VECTOR('',#153579,1.); +#153579 = DIRECTION('',(-0.950957634454,0.309321155879,0.)); +#153580 = ORIENTED_EDGE('',*,*,#153581,.T.); +#153581 = EDGE_CURVE('',#153574,#153582,#153584,.T.); +#153582 = VERTEX_POINT('',#153583); +#153583 = CARTESIAN_POINT('',(126.278533,-109.4672,1.585)); +#153584 = LINE('',#153585,#153586); +#153585 = CARTESIAN_POINT('',(126.280935,-108.958242,1.585)); +#153586 = VECTOR('',#153587,1.); +#153587 = DIRECTION('',(-4.719393840686E-03,-0.999988863599,0.)); +#153588 = ORIENTED_EDGE('',*,*,#153589,.T.); +#153589 = EDGE_CURVE('',#153582,#153590,#153592,.T.); +#153590 = VERTEX_POINT('',#153591); +#153591 = CARTESIAN_POINT('',(126.033337,-109.4672,1.585)); +#153592 = CIRCLE('',#153593,0.1249997864); +#153593 = AXIS2_PLACEMENT_3D('',#153594,#153595,#153596); +#153594 = CARTESIAN_POINT('',(126.155935,-109.442814,1.585)); +#153595 = DIRECTION('',(-0.,0.,-1.)); +#153596 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#153597 = ORIENTED_EDGE('',*,*,#153598,.T.); +#153598 = EDGE_CURVE('',#153590,#153599,#153601,.T.); +#153599 = VERTEX_POINT('',#153600); +#153600 = CARTESIAN_POINT('',(126.033337,-107.618428,1.585)); +#153601 = LINE('',#153602,#153603); +#153602 = CARTESIAN_POINT('',(126.033337,-109.4672,1.585)); +#153603 = VECTOR('',#153604,1.); +#153604 = DIRECTION('',(0.,1.,0.)); +#153605 = ORIENTED_EDGE('',*,*,#153606,.T.); +#153606 = EDGE_CURVE('',#153599,#153607,#153609,.T.); +#153607 = VERTEX_POINT('',#153608); +#153608 = CARTESIAN_POINT('',(126.052001,-107.573368,1.585)); +#153609 = LINE('',#153610,#153611); +#153610 = CARTESIAN_POINT('',(126.033337,-107.618428,1.585)); +#153611 = VECTOR('',#153612,1.); +#153612 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#153613 = ORIENTED_EDGE('',*,*,#153614,.T.); +#153614 = EDGE_CURVE('',#153607,#153443,#153615,.T.); +#153615 = LINE('',#153616,#153617); +#153616 = CARTESIAN_POINT('',(126.052001,-107.573368,1.585)); +#153617 = VECTOR('',#153618,1.); +#153618 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#153619 = FACE_BOUND('',#153620,.F.); +#153620 = EDGE_LOOP('',(#153621,#153632,#153640,#153648,#153656,#153664, + #153672,#153681)); +#153621 = ORIENTED_EDGE('',*,*,#153622,.T.); +#153622 = EDGE_CURVE('',#153623,#153625,#153627,.T.); +#153623 = VERTEX_POINT('',#153624); +#153624 = CARTESIAN_POINT('',(126.888078,-108.015179,1.585)); +#153625 = VERTEX_POINT('',#153626); +#153626 = CARTESIAN_POINT('',(126.640713,-107.767814,1.585)); +#153627 = CIRCLE('',#153628,0.347634658406); +#153628 = AXIS2_PLACEMENT_3D('',#153629,#153630,#153631); +#153629 = CARTESIAN_POINT('',(126.551963,-108.103929,1.585)); +#153630 = DIRECTION('',(0.,0.,1.)); +#153631 = DIRECTION('',(0.96686274476,0.255296754377,-0.)); +#153632 = ORIENTED_EDGE('',*,*,#153633,.T.); +#153633 = EDGE_CURVE('',#153625,#153634,#153636,.T.); +#153634 = VERTEX_POINT('',#153635); +#153635 = CARTESIAN_POINT('',(126.356873,-107.767814,1.585)); +#153636 = LINE('',#153637,#153638); +#153637 = CARTESIAN_POINT('',(126.640713,-107.767814,1.585)); +#153638 = VECTOR('',#153639,1.); +#153639 = DIRECTION('',(-1.,0.,0.)); +#153640 = ORIENTED_EDGE('',*,*,#153641,.T.); +#153641 = EDGE_CURVE('',#153634,#153642,#153644,.T.); +#153642 = VERTEX_POINT('',#153643); +#153643 = CARTESIAN_POINT('',(126.280935,-107.805782,1.585)); +#153644 = LINE('',#153645,#153646); +#153645 = CARTESIAN_POINT('',(126.356873,-107.767814,1.585)); +#153646 = VECTOR('',#153647,1.); +#153647 = DIRECTION('',(-0.89443190233,-0.447204172715,0.)); +#153648 = ORIENTED_EDGE('',*,*,#153649,.T.); +#153649 = EDGE_CURVE('',#153642,#153650,#153652,.T.); +#153650 = VERTEX_POINT('',#153651); +#153651 = CARTESIAN_POINT('',(126.280935,-108.679845,1.585)); +#153652 = LINE('',#153653,#153654); +#153653 = CARTESIAN_POINT('',(126.280935,-107.805782,1.585)); +#153654 = VECTOR('',#153655,1.); +#153655 = DIRECTION('',(0.,-1.,0.)); +#153656 = ORIENTED_EDGE('',*,*,#153657,.T.); +#153657 = EDGE_CURVE('',#153650,#153658,#153660,.T.); +#153658 = VERTEX_POINT('',#153659); +#153659 = CARTESIAN_POINT('',(126.356873,-108.717814,1.585)); +#153660 = LINE('',#153661,#153662); +#153661 = CARTESIAN_POINT('',(126.280935,-108.679845,1.585)); +#153662 = VECTOR('',#153663,1.); +#153663 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#153664 = ORIENTED_EDGE('',*,*,#153665,.T.); +#153665 = EDGE_CURVE('',#153658,#153666,#153668,.T.); +#153666 = VERTEX_POINT('',#153667); +#153667 = CARTESIAN_POINT('',(126.640713,-108.717814,1.585)); +#153668 = LINE('',#153669,#153670); +#153669 = CARTESIAN_POINT('',(126.356873,-108.717814,1.585)); +#153670 = VECTOR('',#153671,1.); +#153671 = DIRECTION('',(1.,0.,0.)); +#153672 = ORIENTED_EDGE('',*,*,#153673,.T.); +#153673 = EDGE_CURVE('',#153666,#153674,#153676,.T.); +#153674 = VERTEX_POINT('',#153675); +#153675 = CARTESIAN_POINT('',(126.888078,-108.470448,1.585)); +#153676 = CIRCLE('',#153677,0.347638026971); +#153677 = AXIS2_PLACEMENT_3D('',#153678,#153679,#153680); +#153678 = CARTESIAN_POINT('',(126.55195995992,-108.3816963187,1.585)); +#153679 = DIRECTION('',(0.,0.,1.)); +#153680 = DIRECTION('',(0.255303025536,-0.96686108886,0.)); +#153681 = ORIENTED_EDGE('',*,*,#153682,.T.); +#153682 = EDGE_CURVE('',#153674,#153623,#153683,.T.); +#153683 = LINE('',#153684,#153685); +#153684 = CARTESIAN_POINT('',(126.888078,-108.470448,1.585)); +#153685 = VECTOR('',#153686,1.); +#153686 = DIRECTION('',(0.,1.,0.)); +#153687 = PLANE('',#153688); +#153688 = AXIS2_PLACEMENT_3D('',#153689,#153690,#153691); +#153689 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153690 = DIRECTION('',(0.,0.,1.)); +#153691 = DIRECTION('',(1.,0.,-0.)); +#153692 = SHELL_BASED_SURFACE_MODEL('',(#153693)); +#153693 = OPEN_SHELL('',(#153694)); +#153694 = ADVANCED_FACE('',(#153695,#153875),#153943,.T.); +#153695 = FACE_BOUND('',#153696,.F.); +#153696 = EDGE_LOOP('',(#153697,#153708,#153716,#153724,#153732,#153740, + #153748,#153756,#153764,#153772,#153780,#153788,#153796,#153804, + #153812,#153820,#153828,#153836,#153844,#153853,#153861,#153869)); +#153697 = ORIENTED_EDGE('',*,*,#153698,.T.); +#153698 = EDGE_CURVE('',#153699,#153701,#153703,.T.); +#153699 = VERTEX_POINT('',#153700); +#153700 = CARTESIAN_POINT('',(136.286489,-107.53888,1.585)); +#153701 = VERTEX_POINT('',#153702); +#153702 = CARTESIAN_POINT('',(136.425381,-107.53888,1.585)); +#153703 = CIRCLE('',#153704,0.125001800942); +#153704 = AXIS2_PLACEMENT_3D('',#153705,#153706,#153707); +#153705 = CARTESIAN_POINT('',(136.355935,-107.642816054,1.585)); +#153706 = DIRECTION('',(0.,0.,-1.)); +#153707 = DIRECTION('',(-0.55555999575,0.831476452536,0.)); +#153708 = ORIENTED_EDGE('',*,*,#153709,.T.); +#153709 = EDGE_CURVE('',#153701,#153710,#153712,.T.); +#153710 = VERTEX_POINT('',#153711); +#153711 = CARTESIAN_POINT('',(136.435495,-107.548994,1.585)); +#153712 = LINE('',#153713,#153714); +#153713 = CARTESIAN_POINT('',(136.425381,-107.53888,1.585)); +#153714 = VECTOR('',#153715,1.); +#153715 = DIRECTION('',(0.707106781188,-0.707106781186,0.)); +#153716 = ORIENTED_EDGE('',*,*,#153717,.T.); +#153717 = EDGE_CURVE('',#153710,#153718,#153720,.T.); +#153718 = VERTEX_POINT('',#153719); +#153719 = CARTESIAN_POINT('',(136.502978,-107.520216,1.585)); +#153720 = LINE('',#153721,#153722); +#153721 = CARTESIAN_POINT('',(136.435495,-107.548994,1.585)); +#153722 = VECTOR('',#153723,1.); +#153723 = DIRECTION('',(0.919850708095,0.39226862584,0.)); +#153724 = ORIENTED_EDGE('',*,*,#153725,.T.); +#153725 = EDGE_CURVE('',#153718,#153726,#153728,.T.); +#153726 = VERTEX_POINT('',#153727); +#153727 = CARTESIAN_POINT('',(136.894607,-107.520216,1.585)); +#153728 = LINE('',#153729,#153730); +#153729 = CARTESIAN_POINT('',(136.502978,-107.520216,1.585)); +#153730 = VECTOR('',#153731,1.); +#153731 = DIRECTION('',(1.,0.,0.)); +#153732 = ORIENTED_EDGE('',*,*,#153733,.T.); +#153733 = EDGE_CURVE('',#153726,#153734,#153736,.T.); +#153734 = VERTEX_POINT('',#153735); +#153735 = CARTESIAN_POINT('',(136.926123,-107.531011,1.585)); +#153736 = LINE('',#153737,#153738); +#153737 = CARTESIAN_POINT('',(136.894607,-107.520216,1.585)); +#153738 = VECTOR('',#153739,1.); +#153739 = DIRECTION('',(0.946042469829,-0.324042659659,0.)); +#153740 = ORIENTED_EDGE('',*,*,#153741,.T.); +#153741 = EDGE_CURVE('',#153734,#153742,#153744,.T.); +#153742 = VERTEX_POINT('',#153743); +#153743 = CARTESIAN_POINT('',(137.118288,-107.629779,1.585)); +#153744 = LINE('',#153745,#153746); +#153745 = CARTESIAN_POINT('',(136.926123,-107.531011,1.585)); +#153746 = VECTOR('',#153747,1.); +#153747 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#153748 = ORIENTED_EDGE('',*,*,#153749,.T.); +#153749 = EDGE_CURVE('',#153742,#153750,#153752,.T.); +#153750 = VERTEX_POINT('',#153751); +#153751 = CARTESIAN_POINT('',(137.231297,-107.744795,1.585)); +#153752 = LINE('',#153753,#153754); +#153753 = CARTESIAN_POINT('',(137.118288,-107.629779,1.585)); +#153754 = VECTOR('',#153755,1.); +#153755 = DIRECTION('',(0.700855916236,-0.713302870229,0.)); +#153756 = ORIENTED_EDGE('',*,*,#153757,.T.); +#153757 = EDGE_CURVE('',#153750,#153758,#153760,.T.); +#153758 = VERTEX_POINT('',#153759); +#153759 = CARTESIAN_POINT('',(137.333639,-107.952655,1.585)); +#153760 = LINE('',#153761,#153762); +#153761 = CARTESIAN_POINT('',(137.231297,-107.744795,1.585)); +#153762 = VECTOR('',#153763,1.); +#153763 = DIRECTION('',(0.44172197285,-0.897151993088,0.)); +#153764 = ORIENTED_EDGE('',*,*,#153765,.T.); +#153765 = EDGE_CURVE('',#153758,#153766,#153768,.T.); +#153766 = VERTEX_POINT('',#153767); +#153767 = CARTESIAN_POINT('',(137.338078,-107.985671,1.585)); +#153768 = LINE('',#153769,#153770); +#153769 = CARTESIAN_POINT('',(137.333639,-107.952655,1.585)); +#153770 = VECTOR('',#153771,1.); +#153771 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#153772 = ORIENTED_EDGE('',*,*,#153773,.T.); +#153773 = EDGE_CURVE('',#153766,#153774,#153776,.T.); +#153774 = VERTEX_POINT('',#153775); +#153775 = CARTESIAN_POINT('',(137.335676,-108.524343,1.585)); +#153776 = LINE('',#153777,#153778); +#153777 = CARTESIAN_POINT('',(137.338078,-107.985671,1.585)); +#153778 = VECTOR('',#153779,1.); +#153779 = DIRECTION('',(-4.459069934991E-03,-0.999990058298,0.)); +#153780 = ORIENTED_EDGE('',*,*,#153781,.T.); +#153781 = EDGE_CURVE('',#153774,#153782,#153784,.T.); +#153782 = VERTEX_POINT('',#153783); +#153783 = CARTESIAN_POINT('',(137.324881,-108.555859,1.585)); +#153784 = LINE('',#153785,#153786); +#153785 = CARTESIAN_POINT('',(137.335676,-108.524343,1.585)); +#153786 = VECTOR('',#153787,1.); +#153787 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#153788 = ORIENTED_EDGE('',*,*,#153789,.T.); +#153789 = EDGE_CURVE('',#153782,#153790,#153792,.T.); +#153790 = VERTEX_POINT('',#153791); +#153791 = CARTESIAN_POINT('',(137.226113,-108.748024,1.585)); +#153792 = LINE('',#153793,#153794); +#153793 = CARTESIAN_POINT('',(137.324881,-108.555859,1.585)); +#153794 = VECTOR('',#153795,1.); +#153795 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#153796 = ORIENTED_EDGE('',*,*,#153797,.T.); +#153797 = EDGE_CURVE('',#153790,#153798,#153800,.T.); +#153798 = VERTEX_POINT('',#153799); +#153799 = CARTESIAN_POINT('',(137.111095,-108.861033,1.585)); +#153800 = LINE('',#153801,#153802); +#153801 = CARTESIAN_POINT('',(137.226113,-108.748024,1.585)); +#153802 = VECTOR('',#153803,1.); +#153803 = DIRECTION('',(-0.713308962756,-0.700849715454,0.)); +#153804 = ORIENTED_EDGE('',*,*,#153805,.T.); +#153805 = EDGE_CURVE('',#153798,#153806,#153808,.T.); +#153806 = VERTEX_POINT('',#153807); +#153807 = CARTESIAN_POINT('',(136.903237,-108.963375,1.585)); +#153808 = LINE('',#153809,#153810); +#153809 = CARTESIAN_POINT('',(137.111095,-108.861033,1.585)); +#153810 = VECTOR('',#153811,1.); +#153811 = DIRECTION('',(-0.897150308754,-0.441725393771,0.)); +#153812 = ORIENTED_EDGE('',*,*,#153813,.T.); +#153813 = EDGE_CURVE('',#153806,#153814,#153816,.T.); +#153814 = VERTEX_POINT('',#153815); +#153815 = CARTESIAN_POINT('',(136.870221,-108.967814,1.585)); +#153816 = LINE('',#153817,#153818); +#153817 = CARTESIAN_POINT('',(136.903237,-108.963375,1.585)); +#153818 = VECTOR('',#153819,1.); +#153819 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#153820 = ORIENTED_EDGE('',*,*,#153821,.T.); +#153821 = EDGE_CURVE('',#153814,#153822,#153824,.T.); +#153822 = VERTEX_POINT('',#153823); +#153823 = CARTESIAN_POINT('',(136.502978,-108.965412,1.585)); +#153824 = LINE('',#153825,#153826); +#153825 = CARTESIAN_POINT('',(136.870221,-108.967814,1.585)); +#153826 = VECTOR('',#153827,1.); +#153827 = DIRECTION('',(-0.999978610776,6.540488513296E-03,0.)); +#153828 = ORIENTED_EDGE('',*,*,#153829,.T.); +#153829 = EDGE_CURVE('',#153822,#153830,#153832,.T.); +#153830 = VERTEX_POINT('',#153831); +#153831 = CARTESIAN_POINT('',(136.480935,-108.958242,1.585)); +#153832 = LINE('',#153833,#153834); +#153833 = CARTESIAN_POINT('',(136.502978,-108.965412,1.585)); +#153834 = VECTOR('',#153835,1.); +#153835 = DIRECTION('',(-0.950957634454,0.309321155878,0.)); +#153836 = ORIENTED_EDGE('',*,*,#153837,.T.); +#153837 = EDGE_CURVE('',#153830,#153838,#153840,.T.); +#153838 = VERTEX_POINT('',#153839); +#153839 = CARTESIAN_POINT('',(136.478533,-109.4672,1.585)); +#153840 = LINE('',#153841,#153842); +#153841 = CARTESIAN_POINT('',(136.480935,-108.958242,1.585)); +#153842 = VECTOR('',#153843,1.); +#153843 = DIRECTION('',(-4.719393840658E-03,-0.999988863599,0.)); +#153844 = ORIENTED_EDGE('',*,*,#153845,.T.); +#153845 = EDGE_CURVE('',#153838,#153846,#153848,.T.); +#153846 = VERTEX_POINT('',#153847); +#153847 = CARTESIAN_POINT('',(136.233337,-109.4672,1.585)); +#153848 = CIRCLE('',#153849,0.1249997864); +#153849 = AXIS2_PLACEMENT_3D('',#153850,#153851,#153852); +#153850 = CARTESIAN_POINT('',(136.355935,-109.442814,1.585)); +#153851 = DIRECTION('',(-0.,0.,-1.)); +#153852 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#153853 = ORIENTED_EDGE('',*,*,#153854,.T.); +#153854 = EDGE_CURVE('',#153846,#153855,#153857,.T.); +#153855 = VERTEX_POINT('',#153856); +#153856 = CARTESIAN_POINT('',(136.233337,-107.618428,1.585)); +#153857 = LINE('',#153858,#153859); +#153858 = CARTESIAN_POINT('',(136.233337,-109.4672,1.585)); +#153859 = VECTOR('',#153860,1.); +#153860 = DIRECTION('',(0.,1.,0.)); +#153861 = ORIENTED_EDGE('',*,*,#153862,.T.); +#153862 = EDGE_CURVE('',#153855,#153863,#153865,.T.); +#153863 = VERTEX_POINT('',#153864); +#153864 = CARTESIAN_POINT('',(136.252001,-107.573368,1.585)); +#153865 = LINE('',#153866,#153867); +#153866 = CARTESIAN_POINT('',(136.233337,-107.618428,1.585)); +#153867 = VECTOR('',#153868,1.); +#153868 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#153869 = ORIENTED_EDGE('',*,*,#153870,.T.); +#153870 = EDGE_CURVE('',#153863,#153699,#153871,.T.); +#153871 = LINE('',#153872,#153873); +#153872 = CARTESIAN_POINT('',(136.252001,-107.573368,1.585)); +#153873 = VECTOR('',#153874,1.); +#153874 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#153875 = FACE_BOUND('',#153876,.F.); +#153876 = EDGE_LOOP('',(#153877,#153888,#153896,#153904,#153912,#153920, + #153928,#153937)); +#153877 = ORIENTED_EDGE('',*,*,#153878,.T.); +#153878 = EDGE_CURVE('',#153879,#153881,#153883,.T.); +#153879 = VERTEX_POINT('',#153880); +#153880 = CARTESIAN_POINT('',(137.088078,-108.015179,1.585)); +#153881 = VERTEX_POINT('',#153882); +#153882 = CARTESIAN_POINT('',(136.840713,-107.767814,1.585)); +#153883 = CIRCLE('',#153884,0.347634658406); +#153884 = AXIS2_PLACEMENT_3D('',#153885,#153886,#153887); +#153885 = CARTESIAN_POINT('',(136.751963,-108.103929,1.585)); +#153886 = DIRECTION('',(0.,0.,1.)); +#153887 = DIRECTION('',(0.96686274476,0.255296754377,-0.)); +#153888 = ORIENTED_EDGE('',*,*,#153889,.T.); +#153889 = EDGE_CURVE('',#153881,#153890,#153892,.T.); +#153890 = VERTEX_POINT('',#153891); +#153891 = CARTESIAN_POINT('',(136.556873,-107.767814,1.585)); +#153892 = LINE('',#153893,#153894); +#153893 = CARTESIAN_POINT('',(136.840713,-107.767814,1.585)); +#153894 = VECTOR('',#153895,1.); +#153895 = DIRECTION('',(-1.,0.,0.)); +#153896 = ORIENTED_EDGE('',*,*,#153897,.T.); +#153897 = EDGE_CURVE('',#153890,#153898,#153900,.T.); +#153898 = VERTEX_POINT('',#153899); +#153899 = CARTESIAN_POINT('',(136.480935,-107.805782,1.585)); +#153900 = LINE('',#153901,#153902); +#153901 = CARTESIAN_POINT('',(136.556873,-107.767814,1.585)); +#153902 = VECTOR('',#153903,1.); +#153903 = DIRECTION('',(-0.89443190233,-0.447204172715,0.)); +#153904 = ORIENTED_EDGE('',*,*,#153905,.T.); +#153905 = EDGE_CURVE('',#153898,#153906,#153908,.T.); +#153906 = VERTEX_POINT('',#153907); +#153907 = CARTESIAN_POINT('',(136.480935,-108.679845,1.585)); +#153908 = LINE('',#153909,#153910); +#153909 = CARTESIAN_POINT('',(136.480935,-107.805782,1.585)); +#153910 = VECTOR('',#153911,1.); +#153911 = DIRECTION('',(0.,-1.,0.)); +#153912 = ORIENTED_EDGE('',*,*,#153913,.T.); +#153913 = EDGE_CURVE('',#153906,#153914,#153916,.T.); +#153914 = VERTEX_POINT('',#153915); +#153915 = CARTESIAN_POINT('',(136.556873,-108.717814,1.585)); +#153916 = LINE('',#153917,#153918); +#153917 = CARTESIAN_POINT('',(136.480935,-108.679845,1.585)); +#153918 = VECTOR('',#153919,1.); +#153919 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#153920 = ORIENTED_EDGE('',*,*,#153921,.T.); +#153921 = EDGE_CURVE('',#153914,#153922,#153924,.T.); +#153922 = VERTEX_POINT('',#153923); +#153923 = CARTESIAN_POINT('',(136.840713,-108.717814,1.585)); +#153924 = LINE('',#153925,#153926); +#153925 = CARTESIAN_POINT('',(136.556873,-108.717814,1.585)); +#153926 = VECTOR('',#153927,1.); +#153927 = DIRECTION('',(1.,0.,0.)); +#153928 = ORIENTED_EDGE('',*,*,#153929,.T.); +#153929 = EDGE_CURVE('',#153922,#153930,#153932,.T.); +#153930 = VERTEX_POINT('',#153931); +#153931 = CARTESIAN_POINT('',(137.088078,-108.470448,1.585)); +#153932 = CIRCLE('',#153933,0.347638026971); +#153933 = AXIS2_PLACEMENT_3D('',#153934,#153935,#153936); +#153934 = CARTESIAN_POINT('',(136.75195995992,-108.3816963187,1.585)); +#153935 = DIRECTION('',(0.,0.,1.)); +#153936 = DIRECTION('',(0.255303025536,-0.96686108886,0.)); +#153937 = ORIENTED_EDGE('',*,*,#153938,.T.); +#153938 = EDGE_CURVE('',#153930,#153879,#153939,.T.); +#153939 = LINE('',#153940,#153941); +#153940 = CARTESIAN_POINT('',(137.088078,-108.470448,1.585)); +#153941 = VECTOR('',#153942,1.); +#153942 = DIRECTION('',(0.,1.,0.)); +#153943 = PLANE('',#153944); +#153944 = AXIS2_PLACEMENT_3D('',#153945,#153946,#153947); +#153945 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153946 = DIRECTION('',(0.,0.,1.)); +#153947 = DIRECTION('',(1.,0.,-0.)); +#153948 = SHELL_BASED_SURFACE_MODEL('',(#153949)); +#153949 = OPEN_SHELL('',(#153950)); +#153950 = ADVANCED_FACE('',(#153951,#154153),#154223,.T.); +#153951 = FACE_BOUND('',#153952,.F.); +#153952 = EDGE_LOOP('',(#153953,#153963,#153971,#153979,#153987,#153995, + #154003,#154011,#154019,#154027,#154035,#154043,#154051,#154059, + #154067,#154075,#154083,#154091,#154099,#154107,#154115,#154123, + #154131,#154139,#154147)); +#153953 = ORIENTED_EDGE('',*,*,#153954,.T.); +#153954 = EDGE_CURVE('',#153955,#153957,#153959,.T.); +#153955 = VERTEX_POINT('',#153956); +#153956 = CARTESIAN_POINT('',(83.000884,-107.506232,1.585)); +#153957 = VERTEX_POINT('',#153958); +#153958 = CARTESIAN_POINT('',(83.047839,-107.485432,1.585)); +#153959 = LINE('',#153960,#153961); +#153960 = CARTESIAN_POINT('',(83.000884,-107.506232,1.585)); +#153961 = VECTOR('',#153962,1.); +#153962 = DIRECTION('',(0.914308703427,0.405018017917,0.)); +#153963 = ORIENTED_EDGE('',*,*,#153964,.T.); +#153964 = EDGE_CURVE('',#153957,#153965,#153967,.T.); +#153965 = VERTEX_POINT('',#153966); +#153966 = CARTESIAN_POINT('',(83.572166,-107.357321,1.585)); +#153967 = LINE('',#153968,#153969); +#153968 = CARTESIAN_POINT('',(83.047839,-107.485432,1.585)); +#153969 = VECTOR('',#153970,1.); +#153970 = DIRECTION('',(0.971423711464,0.237352001898,0.)); +#153971 = ORIENTED_EDGE('',*,*,#153972,.T.); +#153972 = EDGE_CURVE('',#153965,#153973,#153975,.T.); +#153973 = VERTEX_POINT('',#153974); +#153974 = CARTESIAN_POINT('',(84.451226,-107.357646,1.585)); +#153975 = LINE('',#153976,#153977); +#153976 = CARTESIAN_POINT('',(83.572166,-107.357321,1.585)); +#153977 = VECTOR('',#153978,1.); +#153978 = DIRECTION('',(0.999999931656,-3.697130773689E-04,0.)); +#153979 = ORIENTED_EDGE('',*,*,#153980,.T.); +#153980 = EDGE_CURVE('',#153973,#153981,#153983,.T.); +#153981 = VERTEX_POINT('',#153982); +#153982 = CARTESIAN_POINT('',(84.482503,-107.361623,1.585)); +#153983 = LINE('',#153984,#153985); +#153984 = CARTESIAN_POINT('',(84.451226,-107.357646,1.585)); +#153985 = VECTOR('',#153986,1.); +#153986 = DIRECTION('',(0.992012638826,-0.126138512792,0.)); +#153987 = ORIENTED_EDGE('',*,*,#153988,.T.); +#153988 = EDGE_CURVE('',#153981,#153989,#153991,.T.); +#153989 = VERTEX_POINT('',#153990); +#153990 = CARTESIAN_POINT('',(85.005433,-107.495325,1.585)); +#153991 = LINE('',#153992,#153993); +#153992 = CARTESIAN_POINT('',(84.482503,-107.361623,1.585)); +#153993 = VECTOR('',#153994,1.); +#153994 = DIRECTION('',(0.968834186972,-0.247710149478,0.)); +#153995 = ORIENTED_EDGE('',*,*,#153996,.T.); +#153996 = EDGE_CURVE('',#153989,#153997,#153999,.T.); +#153997 = VERTEX_POINT('',#153998); +#153998 = CARTESIAN_POINT('',(85.047427,-107.524887,1.585)); +#153999 = LINE('',#154000,#154001); +#154000 = CARTESIAN_POINT('',(85.005433,-107.495325,1.585)); +#154001 = VECTOR('',#154002,1.); +#154002 = DIRECTION('',(0.817708654312,-0.575632310301,0.)); +#154003 = ORIENTED_EDGE('',*,*,#154004,.T.); +#154004 = EDGE_CURVE('',#153997,#154005,#154007,.T.); +#154005 = VERTEX_POINT('',#154006); +#154006 = CARTESIAN_POINT('',(85.313701,-107.795237,1.585)); +#154007 = LINE('',#154008,#154009); +#154008 = CARTESIAN_POINT('',(85.047427,-107.524887,1.585)); +#154009 = VECTOR('',#154010,1.); +#154010 = DIRECTION('',(0.701715614236,-0.712457154317,0.)); +#154011 = ORIENTED_EDGE('',*,*,#154012,.T.); +#154012 = EDGE_CURVE('',#154005,#154013,#154015,.T.); +#154013 = VERTEX_POINT('',#154014); +#154014 = CARTESIAN_POINT('',(85.457464,-108.086572,1.585)); +#154015 = LINE('',#154016,#154017); +#154016 = CARTESIAN_POINT('',(85.313701,-107.795237,1.585)); +#154017 = VECTOR('',#154018,1.); +#154018 = DIRECTION('',(0.442517646706,-0.896759796352,0.)); +#154019 = ORIENTED_EDGE('',*,*,#154020,.T.); +#154020 = EDGE_CURVE('',#154013,#154021,#154023,.T.); +#154021 = VERTEX_POINT('',#154022); +#154022 = CARTESIAN_POINT('',(85.46279,-108.126191,1.585)); +#154023 = LINE('',#154024,#154025); +#154024 = CARTESIAN_POINT('',(85.457464,-108.086572,1.585)); +#154025 = VECTOR('',#154026,1.); +#154026 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#154027 = ORIENTED_EDGE('',*,*,#154028,.T.); +#154028 = EDGE_CURVE('',#154021,#154029,#154031,.T.); +#154029 = VERTEX_POINT('',#154030); +#154030 = CARTESIAN_POINT('',(85.459908,-108.650693,1.585)); +#154031 = LINE('',#154032,#154033); +#154032 = CARTESIAN_POINT('',(85.46279,-108.126191,1.585)); +#154033 = VECTOR('',#154034,1.); +#154034 = DIRECTION('',(-5.494653012067E-03,-0.99998490428,0.)); +#154035 = ORIENTED_EDGE('',*,*,#154036,.T.); +#154036 = EDGE_CURVE('',#154029,#154037,#154039,.T.); +#154037 = VERTEX_POINT('',#154038); +#154038 = CARTESIAN_POINT('',(85.446954,-108.688511,1.585)); +#154039 = LINE('',#154040,#154041); +#154040 = CARTESIAN_POINT('',(85.459908,-108.650693,1.585)); +#154041 = VECTOR('',#154042,1.); +#154042 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#154043 = ORIENTED_EDGE('',*,*,#154044,.T.); +#154044 = EDGE_CURVE('',#154037,#154045,#154047,.T.); +#154045 = VERTEX_POINT('',#154046); +#154046 = CARTESIAN_POINT('',(85.307479,-108.961016,1.585)); +#154047 = LINE('',#154048,#154049); +#154048 = CARTESIAN_POINT('',(85.446954,-108.688511,1.585)); +#154049 = VECTOR('',#154050,1.); +#154050 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#154051 = ORIENTED_EDGE('',*,*,#154052,.T.); +#154052 = EDGE_CURVE('',#154045,#154053,#154055,.T.); +#154053 = VERTEX_POINT('',#154054); +#154054 = CARTESIAN_POINT('',(85.024696,-109.241388,1.585)); +#154055 = LINE('',#154056,#154057); +#154056 = CARTESIAN_POINT('',(85.307479,-108.961016,1.585)); +#154057 = VECTOR('',#154058,1.); +#154058 = DIRECTION('',(-0.710127564942,-0.704073037056,0.)); +#154059 = ORIENTED_EDGE('',*,*,#154060,.T.); +#154060 = EDGE_CURVE('',#154053,#154061,#154063,.T.); +#154061 = VERTEX_POINT('',#154062); +#154062 = CARTESIAN_POINT('',(84.977742,-109.262188,1.585)); +#154063 = LINE('',#154064,#154065); +#154064 = CARTESIAN_POINT('',(85.024696,-109.241388,1.585)); +#154065 = VECTOR('',#154066,1.); +#154066 = DIRECTION('',(-0.91430550916,-0.405025228745,0.)); +#154067 = ORIENTED_EDGE('',*,*,#154068,.T.); +#154068 = EDGE_CURVE('',#154061,#154069,#154071,.T.); +#154069 = VERTEX_POINT('',#154070); +#154070 = CARTESIAN_POINT('',(84.453414,-109.3903,1.585)); +#154071 = LINE('',#154072,#154073); +#154072 = CARTESIAN_POINT('',(84.977742,-109.262188,1.585)); +#154073 = VECTOR('',#154074,1.); +#154074 = DIRECTION('',(-0.971423388661,-0.23735332305,0.)); +#154075 = ORIENTED_EDGE('',*,*,#154076,.T.); +#154076 = EDGE_CURVE('',#154069,#154077,#154079,.T.); +#154077 = VERTEX_POINT('',#154078); +#154078 = CARTESIAN_POINT('',(83.550193,-109.387595,1.585)); +#154079 = LINE('',#154080,#154081); +#154080 = CARTESIAN_POINT('',(84.453414,-109.3903,1.585)); +#154081 = VECTOR('',#154082,1.); +#154082 = DIRECTION('',(-0.999995515505,2.994823935041E-03,0.)); +#154083 = ORIENTED_EDGE('',*,*,#154084,.T.); +#154084 = EDGE_CURVE('',#154077,#154085,#154087,.T.); +#154085 = VERTEX_POINT('',#154086); +#154086 = CARTESIAN_POINT('',(83.020147,-109.252295,1.585)); +#154087 = LINE('',#154088,#154089); +#154088 = CARTESIAN_POINT('',(83.550193,-109.387595,1.585)); +#154089 = VECTOR('',#154090,1.); +#154090 = DIRECTION('',(-0.968931245641,0.247330227066,0.)); +#154091 = ORIENTED_EDGE('',*,*,#154092,.T.); +#154092 = EDGE_CURVE('',#154085,#154093,#154095,.T.); +#154093 = VERTEX_POINT('',#154094); +#154094 = CARTESIAN_POINT('',(82.978153,-109.222733,1.585)); +#154095 = LINE('',#154096,#154097); +#154096 = CARTESIAN_POINT('',(83.020147,-109.252295,1.585)); +#154097 = VECTOR('',#154098,1.); +#154098 = DIRECTION('',(-0.817708654312,0.575632310301,0.)); +#154099 = ORIENTED_EDGE('',*,*,#154100,.T.); +#154100 = EDGE_CURVE('',#154093,#154101,#154103,.T.); +#154101 = VERTEX_POINT('',#154102); +#154102 = CARTESIAN_POINT('',(82.711879,-108.952383,1.585)); +#154103 = LINE('',#154104,#154105); +#154104 = CARTESIAN_POINT('',(82.978153,-109.222733,1.585)); +#154105 = VECTOR('',#154106,1.); +#154106 = DIRECTION('',(-0.701715614236,0.712457154317,0.)); +#154107 = ORIENTED_EDGE('',*,*,#154108,.T.); +#154108 = EDGE_CURVE('',#154101,#154109,#154111,.T.); +#154109 = VERTEX_POINT('',#154110); +#154110 = CARTESIAN_POINT('',(82.568116,-108.661048,1.585)); +#154111 = LINE('',#154112,#154113); +#154112 = CARTESIAN_POINT('',(82.711879,-108.952383,1.585)); +#154113 = VECTOR('',#154114,1.); +#154114 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#154115 = ORIENTED_EDGE('',*,*,#154116,.T.); +#154116 = EDGE_CURVE('',#154109,#154117,#154119,.T.); +#154117 = VERTEX_POINT('',#154118); +#154118 = CARTESIAN_POINT('',(82.56279,-108.621429,1.585)); +#154119 = LINE('',#154120,#154121); +#154120 = CARTESIAN_POINT('',(82.568116,-108.661048,1.585)); +#154121 = VECTOR('',#154122,1.); +#154122 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#154123 = ORIENTED_EDGE('',*,*,#154124,.T.); +#154124 = EDGE_CURVE('',#154117,#154125,#154127,.T.); +#154125 = VERTEX_POINT('',#154126); +#154126 = CARTESIAN_POINT('',(82.565672,-108.096927,1.585)); +#154127 = LINE('',#154128,#154129); +#154128 = CARTESIAN_POINT('',(82.56279,-108.621429,1.585)); +#154129 = VECTOR('',#154130,1.); +#154130 = DIRECTION('',(5.494653012067E-03,0.99998490428,0.)); +#154131 = ORIENTED_EDGE('',*,*,#154132,.T.); +#154132 = EDGE_CURVE('',#154125,#154133,#154135,.T.); +#154133 = VERTEX_POINT('',#154134); +#154134 = CARTESIAN_POINT('',(82.578626,-108.059109,1.585)); +#154135 = LINE('',#154136,#154137); +#154136 = CARTESIAN_POINT('',(82.565672,-108.096927,1.585)); +#154137 = VECTOR('',#154138,1.); +#154138 = DIRECTION('',(0.32405186212,0.946039317712,0.)); +#154139 = ORIENTED_EDGE('',*,*,#154140,.T.); +#154140 = EDGE_CURVE('',#154133,#154141,#154143,.T.); +#154141 = VERTEX_POINT('',#154142); +#154142 = CARTESIAN_POINT('',(82.718101,-107.786604,1.585)); +#154143 = LINE('',#154144,#154145); +#154144 = CARTESIAN_POINT('',(82.578626,-108.059109,1.585)); +#154145 = VECTOR('',#154146,1.); +#154146 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#154147 = ORIENTED_EDGE('',*,*,#154148,.T.); +#154148 = EDGE_CURVE('',#154141,#153955,#154149,.T.); +#154149 = LINE('',#154150,#154151); +#154150 = CARTESIAN_POINT('',(82.718101,-107.786604,1.585)); +#154151 = VECTOR('',#154152,1.); +#154152 = DIRECTION('',(0.710127564942,0.704073037056,0.)); +#154153 = FACE_BOUND('',#154154,.F.); +#154154 = EDGE_LOOP('',(#154155,#154166,#154174,#154183,#154191,#154200, + #154208,#154217)); +#154155 = ORIENTED_EDGE('',*,*,#154156,.T.); +#154156 = EDGE_CURVE('',#154157,#154159,#154161,.T.); +#154157 = VERTEX_POINT('',#154158); +#154158 = CARTESIAN_POINT('',(84.864674,-107.766398,1.585)); +#154159 = VERTEX_POINT('',#154160); +#154160 = CARTESIAN_POINT('',(83.160906,-107.766397,1.585)); +#154161 = CIRCLE('',#154162,2.621187449329); +#154162 = AXIS2_PLACEMENT_3D('',#154163,#154164,#154165); +#154163 = CARTESIAN_POINT('',(84.012788545052,-110.2452918694,1.585)); +#154164 = DIRECTION('',(0.,0.,1.)); +#154165 = DIRECTION('',(0.324999822186,0.945714077076,-0.)); +#154166 = ORIENTED_EDGE('',*,*,#154167,.T.); +#154167 = EDGE_CURVE('',#154159,#154168,#154170,.T.); +#154168 = VERTEX_POINT('',#154169); +#154169 = CARTESIAN_POINT('',(82.959877,-107.967426,1.585)); +#154170 = LINE('',#154171,#154172); +#154171 = CARTESIAN_POINT('',(83.160906,-107.766397,1.585)); +#154172 = VECTOR('',#154173,1.); +#154173 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#154174 = ORIENTED_EDGE('',*,*,#154175,.T.); +#154175 = EDGE_CURVE('',#154168,#154176,#154178,.T.); +#154176 = VERTEX_POINT('',#154177); +#154177 = CARTESIAN_POINT('',(82.959877,-108.780193,1.585)); +#154178 = CIRCLE('',#154179,0.700076048377); +#154179 = AXIS2_PLACEMENT_3D('',#154180,#154181,#154182); +#154180 = CARTESIAN_POINT('',(83.529928685761,-108.3738095,1.585)); +#154181 = DIRECTION('',(0.,0.,1.)); +#154182 = DIRECTION('',(-0.814271088238,0.580484792962,0.)); +#154183 = ORIENTED_EDGE('',*,*,#154184,.T.); +#154184 = EDGE_CURVE('',#154176,#154185,#154187,.T.); +#154185 = VERTEX_POINT('',#154186); +#154186 = CARTESIAN_POINT('',(83.160907,-108.981223,1.585)); +#154187 = LINE('',#154188,#154189); +#154188 = CARTESIAN_POINT('',(82.959877,-108.780193,1.585)); +#154189 = VECTOR('',#154190,1.); +#154190 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#154191 = ORIENTED_EDGE('',*,*,#154192,.T.); +#154192 = EDGE_CURVE('',#154185,#154193,#154195,.T.); +#154193 = VERTEX_POINT('',#154194); +#154194 = CARTESIAN_POINT('',(84.864672,-108.981223,1.585)); +#154195 = CIRCLE('',#154196,2.621161269852); +#154196 = AXIS2_PLACEMENT_3D('',#154197,#154198,#154199); +#154197 = CARTESIAN_POINT('',(84.0127895,-106.5023557972,1.585)); +#154198 = DIRECTION('',(0.,0.,1.)); +#154199 = DIRECTION('',(-0.325001940857,-0.94571334898,0.)); +#154200 = ORIENTED_EDGE('',*,*,#154201,.T.); +#154201 = EDGE_CURVE('',#154193,#154202,#154204,.T.); +#154202 = VERTEX_POINT('',#154203); +#154203 = CARTESIAN_POINT('',(85.065702,-108.780194,1.585)); +#154204 = LINE('',#154205,#154206); +#154205 = CARTESIAN_POINT('',(84.864672,-108.981223,1.585)); +#154206 = VECTOR('',#154207,1.); +#154207 = DIRECTION('',(0.707108539898,0.70710502247,0.)); +#154208 = ORIENTED_EDGE('',*,*,#154209,.T.); +#154209 = EDGE_CURVE('',#154202,#154210,#154212,.T.); +#154210 = VERTEX_POINT('',#154211); +#154211 = CARTESIAN_POINT('',(85.065702,-107.967426,1.585)); +#154212 = CIRCLE('',#154213,0.700073337415); +#154213 = AXIS2_PLACEMENT_3D('',#154214,#154215,#154216); +#154214 = CARTESIAN_POINT('',(84.495654,-108.37381,1.585)); +#154215 = DIRECTION('',(0.,-0.,1.)); +#154216 = DIRECTION('',(0.814268976597,-0.580487755041,-0.)); +#154217 = ORIENTED_EDGE('',*,*,#154218,.T.); +#154218 = EDGE_CURVE('',#154210,#154157,#154219,.T.); +#154219 = LINE('',#154220,#154221); +#154220 = CARTESIAN_POINT('',(85.065702,-107.967426,1.585)); +#154221 = VECTOR('',#154222,1.); +#154222 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#154223 = PLANE('',#154224); +#154224 = AXIS2_PLACEMENT_3D('',#154225,#154226,#154227); +#154225 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154226 = DIRECTION('',(0.,0.,1.)); +#154227 = DIRECTION('',(1.,0.,-0.)); +#154228 = SHELL_BASED_SURFACE_MODEL('',(#154229)); +#154229 = OPEN_SHELL('',(#154230)); +#154230 = ADVANCED_FACE('',(#154231),#154267,.T.); +#154231 = FACE_BOUND('',#154232,.F.); +#154232 = EDGE_LOOP('',(#154233,#154244,#154252,#154261)); +#154233 = ORIENTED_EDGE('',*,*,#154234,.T.); +#154234 = EDGE_CURVE('',#154235,#154237,#154239,.T.); +#154235 = VERTEX_POINT('',#154236); +#154236 = CARTESIAN_POINT('',(187.77607,-109.3731,1.585)); +#154237 = VERTEX_POINT('',#154238); +#154238 = CARTESIAN_POINT('',(187.77607,-109.2531,1.585)); +#154239 = CIRCLE('',#154240,6.000000000042E-02); +#154240 = AXIS2_PLACEMENT_3D('',#154241,#154242,#154243); +#154241 = CARTESIAN_POINT('',(187.77606977441,-109.3131,1.585)); +#154242 = DIRECTION('',(0.,0.,-1.)); +#154243 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#154244 = ORIENTED_EDGE('',*,*,#154245,.T.); +#154245 = EDGE_CURVE('',#154237,#154246,#154248,.T.); +#154246 = VERTEX_POINT('',#154247); +#154247 = CARTESIAN_POINT('',(188.05723,-109.2531,1.585)); +#154248 = LINE('',#154249,#154250); +#154249 = CARTESIAN_POINT('',(187.77607,-109.2531,1.585)); +#154250 = VECTOR('',#154251,1.); +#154251 = DIRECTION('',(1.,0.,0.)); +#154252 = ORIENTED_EDGE('',*,*,#154253,.T.); +#154253 = EDGE_CURVE('',#154246,#154254,#154256,.T.); +#154254 = VERTEX_POINT('',#154255); +#154255 = CARTESIAN_POINT('',(188.05723,-109.3731,1.585)); +#154256 = CIRCLE('',#154257,6.000000000042E-02); +#154257 = AXIS2_PLACEMENT_3D('',#154258,#154259,#154260); +#154258 = CARTESIAN_POINT('',(188.05723022558,-109.3131,1.585)); +#154259 = DIRECTION('',(0.,0.,-1.)); +#154260 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#154261 = ORIENTED_EDGE('',*,*,#154262,.T.); +#154262 = EDGE_CURVE('',#154254,#154235,#154263,.T.); +#154263 = LINE('',#154264,#154265); +#154264 = CARTESIAN_POINT('',(188.05723,-109.3731,1.585)); +#154265 = VECTOR('',#154266,1.); +#154266 = DIRECTION('',(-1.,0.,0.)); +#154267 = PLANE('',#154268); +#154268 = AXIS2_PLACEMENT_3D('',#154269,#154270,#154271); +#154269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154270 = DIRECTION('',(0.,0.,1.)); +#154271 = DIRECTION('',(1.,0.,-0.)); +#154272 = SHELL_BASED_SURFACE_MODEL('',(#154273)); +#154273 = OPEN_SHELL('',(#154274)); +#154274 = ADVANCED_FACE('',(#154275),#154391,.T.); +#154275 = FACE_BOUND('',#154276,.F.); +#154276 = EDGE_LOOP('',(#154277,#154288,#154296,#154304,#154312,#154321, + #154329,#154337,#154345,#154353,#154361,#154369,#154377,#154385)); +#154277 = ORIENTED_EDGE('',*,*,#154278,.T.); +#154278 = EDGE_CURVE('',#154279,#154281,#154283,.T.); +#154279 = VERTEX_POINT('',#154280); +#154280 = CARTESIAN_POINT('',(163.486217,-106.850139,1.585)); +#154281 = VERTEX_POINT('',#154282); +#154282 = CARTESIAN_POINT('',(163.584076,-106.830674,1.585)); +#154283 = CIRCLE('',#154284,5.999850008893E-02); +#154284 = AXIS2_PLACEMENT_3D('',#154285,#154286,#154287); +#154285 = CARTESIAN_POINT('',(163.54164907544,-106.8730977679,1.585)); +#154286 = DIRECTION('',(0.,0.,-1.)); +#154287 = DIRECTION('',(-0.923891019961,0.382655698031,0.)); +#154288 = ORIENTED_EDGE('',*,*,#154289,.T.); +#154289 = EDGE_CURVE('',#154281,#154290,#154292,.T.); +#154290 = VERTEX_POINT('',#154291); +#154291 = CARTESIAN_POINT('',(165.666503,-108.9131,1.585)); +#154292 = LINE('',#154293,#154294); +#154293 = CARTESIAN_POINT('',(163.584076,-106.830674,1.585)); +#154294 = VECTOR('',#154295,1.); +#154295 = DIRECTION('',(0.707106950966,-0.707106611407,0.)); +#154296 = ORIENTED_EDGE('',*,*,#154297,.T.); +#154297 = EDGE_CURVE('',#154290,#154298,#154300,.T.); +#154298 = VERTEX_POINT('',#154299); +#154299 = CARTESIAN_POINT('',(169.716798,-108.9131,1.585)); +#154300 = LINE('',#154301,#154302); +#154301 = CARTESIAN_POINT('',(165.666503,-108.9131,1.585)); +#154302 = VECTOR('',#154303,1.); +#154303 = DIRECTION('',(1.,0.,0.)); +#154304 = ORIENTED_EDGE('',*,*,#154305,.T.); +#154305 = EDGE_CURVE('',#154298,#154306,#154308,.T.); +#154306 = VERTEX_POINT('',#154307); +#154307 = CARTESIAN_POINT('',(171.799223,-106.830674,1.585)); +#154308 = LINE('',#154309,#154310); +#154309 = CARTESIAN_POINT('',(169.716798,-108.9131,1.585)); +#154310 = VECTOR('',#154311,1.); +#154311 = DIRECTION('',(0.707106611407,0.707106950966,0.)); +#154312 = ORIENTED_EDGE('',*,*,#154313,.T.); +#154313 = EDGE_CURVE('',#154306,#154314,#154316,.T.); +#154314 = VERTEX_POINT('',#154315); +#154315 = CARTESIAN_POINT('',(171.884076,-106.915527,1.585)); +#154316 = CIRCLE('',#154317,6.000013170922E-02); +#154317 = AXIS2_PLACEMENT_3D('',#154318,#154319,#154320); +#154318 = CARTESIAN_POINT('',(171.8416500587,-106.8730999412,1.585)); +#154319 = DIRECTION('',(0.,0.,-1.)); +#154320 = DIRECTION('',(-0.707116092923,0.707097469327,0.)); +#154321 = ORIENTED_EDGE('',*,*,#154322,.T.); +#154322 = EDGE_CURVE('',#154314,#154323,#154325,.T.); +#154323 = VERTEX_POINT('',#154324); +#154324 = CARTESIAN_POINT('',(169.784076,-109.015526,1.585)); +#154325 = LINE('',#154326,#154327); +#154326 = CARTESIAN_POINT('',(171.884076,-106.915527,1.585)); +#154327 = VECTOR('',#154328,1.); +#154328 = DIRECTION('',(-0.707106949545,-0.707106612828,0.)); +#154329 = ORIENTED_EDGE('',*,*,#154330,.T.); +#154330 = EDGE_CURVE('',#154323,#154331,#154333,.T.); +#154331 = VERTEX_POINT('',#154332); +#154332 = CARTESIAN_POINT('',(169.764611,-109.028533,1.585)); +#154333 = LINE('',#154334,#154335); +#154334 = CARTESIAN_POINT('',(169.784076,-109.015526,1.585)); +#154335 = VECTOR('',#154336,1.); +#154336 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#154337 = ORIENTED_EDGE('',*,*,#154338,.T.); +#154338 = EDGE_CURVE('',#154331,#154339,#154341,.T.); +#154339 = VERTEX_POINT('',#154340); +#154340 = CARTESIAN_POINT('',(169.74165,-109.0331,1.585)); +#154341 = LINE('',#154342,#154343); +#154342 = CARTESIAN_POINT('',(169.764611,-109.028533,1.585)); +#154343 = VECTOR('',#154344,1.); +#154344 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#154345 = ORIENTED_EDGE('',*,*,#154346,.T.); +#154346 = EDGE_CURVE('',#154339,#154347,#154349,.T.); +#154347 = VERTEX_POINT('',#154348); +#154348 = CARTESIAN_POINT('',(165.64165,-109.0331,1.585)); +#154349 = LINE('',#154350,#154351); +#154350 = CARTESIAN_POINT('',(169.74165,-109.0331,1.585)); +#154351 = VECTOR('',#154352,1.); +#154352 = DIRECTION('',(-1.,0.,0.)); +#154353 = ORIENTED_EDGE('',*,*,#154354,.T.); +#154354 = EDGE_CURVE('',#154347,#154355,#154357,.T.); +#154355 = VERTEX_POINT('',#154356); +#154356 = CARTESIAN_POINT('',(165.618688,-109.028533,1.585)); +#154357 = LINE('',#154358,#154359); +#154358 = CARTESIAN_POINT('',(165.64165,-109.0331,1.585)); +#154359 = VECTOR('',#154360,1.); +#154360 = DIRECTION('',(-0.980788760097,0.195072827601,0.)); +#154361 = ORIENTED_EDGE('',*,*,#154362,.T.); +#154362 = EDGE_CURVE('',#154355,#154363,#154365,.T.); +#154363 = VERTEX_POINT('',#154364); +#154364 = CARTESIAN_POINT('',(165.599223,-109.015526,1.585)); +#154365 = LINE('',#154366,#154367); +#154366 = CARTESIAN_POINT('',(165.618688,-109.028533,1.585)); +#154367 = VECTOR('',#154368,1.); +#154368 = DIRECTION('',(-0.831451797698,0.555596893535,0.)); +#154369 = ORIENTED_EDGE('',*,*,#154370,.T.); +#154370 = EDGE_CURVE('',#154363,#154371,#154373,.T.); +#154371 = VERTEX_POINT('',#154372); +#154372 = CARTESIAN_POINT('',(163.499224,-106.915526,1.585)); +#154373 = LINE('',#154374,#154375); +#154374 = CARTESIAN_POINT('',(165.599223,-109.015526,1.585)); +#154375 = VECTOR('',#154376,1.); +#154376 = DIRECTION('',(-0.707106612828,0.707106949545,0.)); +#154377 = ORIENTED_EDGE('',*,*,#154378,.T.); +#154378 = EDGE_CURVE('',#154371,#154379,#154381,.T.); +#154379 = VERTEX_POINT('',#154380); +#154380 = CARTESIAN_POINT('',(163.486217,-106.896061,1.585)); +#154381 = LINE('',#154382,#154383); +#154382 = CARTESIAN_POINT('',(163.499224,-106.915526,1.585)); +#154383 = VECTOR('',#154384,1.); +#154384 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#154385 = ORIENTED_EDGE('',*,*,#154386,.T.); +#154386 = EDGE_CURVE('',#154379,#154279,#154387,.T.); +#154387 = LINE('',#154388,#154389); +#154388 = CARTESIAN_POINT('',(163.486217,-106.896061,1.585)); +#154389 = VECTOR('',#154390,1.); +#154390 = DIRECTION('',(0.,1.,0.)); +#154391 = PLANE('',#154392); +#154392 = AXIS2_PLACEMENT_3D('',#154393,#154394,#154395); +#154393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154394 = DIRECTION('',(0.,0.,1.)); +#154395 = DIRECTION('',(1.,0.,-0.)); +#154396 = SHELL_BASED_SURFACE_MODEL('',(#154397)); +#154397 = OPEN_SHELL('',(#154398)); +#154398 = ADVANCED_FACE('',(#154399),#154580,.T.); +#154399 = FACE_BOUND('',#154400,.F.); +#154400 = EDGE_LOOP('',(#154401,#154412,#154420,#154428,#154436,#154444, + #154452,#154460,#154468,#154477,#154485,#154494,#154502,#154510, + #154518,#154526,#154534,#154542,#154550,#154558,#154566,#154574)); +#154401 = ORIENTED_EDGE('',*,*,#154402,.T.); +#154402 = EDGE_CURVE('',#154403,#154405,#154407,.T.); +#154403 = VERTEX_POINT('',#154404); +#154404 = CARTESIAN_POINT('',(119.486489,-107.53888,1.585)); +#154405 = VERTEX_POINT('',#154406); +#154406 = CARTESIAN_POINT('',(119.678533,-107.618428,1.585)); +#154407 = CIRCLE('',#154408,0.124999692383); +#154408 = AXIS2_PLACEMENT_3D('',#154409,#154410,#154411); +#154409 = CARTESIAN_POINT('',(119.555935,-107.642813518,1.585)); +#154410 = DIRECTION('',(0.,0.,-1.)); +#154411 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#154412 = ORIENTED_EDGE('',*,*,#154413,.T.); +#154413 = EDGE_CURVE('',#154405,#154414,#154416,.T.); +#154414 = VERTEX_POINT('',#154415); +#154415 = CARTESIAN_POINT('',(119.680935,-108.556162,1.585)); +#154416 = LINE('',#154417,#154418); +#154417 = CARTESIAN_POINT('',(119.678533,-107.618428,1.585)); +#154418 = VECTOR('',#154419,1.); +#154419 = DIRECTION('',(2.561485581177E-03,-0.99999671939,0.)); +#154420 = ORIENTED_EDGE('',*,*,#154421,.T.); +#154421 = EDGE_CURVE('',#154414,#154422,#154424,.T.); +#154422 = VERTEX_POINT('',#154423); +#154423 = CARTESIAN_POINT('',(119.734818,-108.66393,1.585)); +#154424 = LINE('',#154425,#154426); +#154425 = CARTESIAN_POINT('',(119.680935,-108.556162,1.585)); +#154426 = VECTOR('',#154427,1.); +#154427 = DIRECTION('',(0.447206955813,-0.894430510812,0.)); +#154428 = ORIENTED_EDGE('',*,*,#154429,.T.); +#154429 = EDGE_CURVE('',#154422,#154430,#154432,.T.); +#154430 = VERTEX_POINT('',#154431); +#154431 = CARTESIAN_POINT('',(119.842587,-108.717814,1.585)); +#154432 = LINE('',#154433,#154434); +#154433 = CARTESIAN_POINT('',(119.734818,-108.66393,1.585)); +#154434 = VECTOR('',#154435,1.); +#154435 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#154436 = ORIENTED_EDGE('',*,*,#154437,.T.); +#154437 = EDGE_CURVE('',#154430,#154438,#154440,.T.); +#154438 = VERTEX_POINT('',#154439); +#154439 = CARTESIAN_POINT('',(120.040713,-108.717814,1.585)); +#154440 = LINE('',#154441,#154442); +#154441 = CARTESIAN_POINT('',(119.842587,-108.717814,1.585)); +#154442 = VECTOR('',#154443,1.); +#154443 = DIRECTION('',(1.,0.,0.)); +#154444 = ORIENTED_EDGE('',*,*,#154445,.T.); +#154445 = EDGE_CURVE('',#154438,#154446,#154448,.T.); +#154446 = VERTEX_POINT('',#154447); +#154447 = CARTESIAN_POINT('',(120.167604,-108.654368,1.585)); +#154448 = LINE('',#154449,#154450); +#154449 = CARTESIAN_POINT('',(120.040713,-108.717814,1.585)); +#154450 = VECTOR('',#154451,1.); +#154451 = DIRECTION('',(0.894425781241,0.447216415007,0.)); +#154452 = ORIENTED_EDGE('',*,*,#154453,.T.); +#154453 = EDGE_CURVE('',#154446,#154454,#154456,.T.); +#154454 = VERTEX_POINT('',#154455); +#154455 = CARTESIAN_POINT('',(120.202364,-108.619608,1.585)); +#154456 = LINE('',#154457,#154458); +#154457 = CARTESIAN_POINT('',(120.167604,-108.654368,1.585)); +#154458 = VECTOR('',#154459,1.); +#154459 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#154460 = ORIENTED_EDGE('',*,*,#154461,.T.); +#154461 = EDGE_CURVE('',#154454,#154462,#154464,.T.); +#154462 = VERTEX_POINT('',#154463); +#154463 = CARTESIAN_POINT('',(120.204766,-107.618428,1.585)); +#154464 = LINE('',#154465,#154466); +#154465 = CARTESIAN_POINT('',(120.202364,-108.619608,1.585)); +#154466 = VECTOR('',#154467,1.); +#154467 = DIRECTION('',(2.399162075814E-03,0.999997122007,0.)); +#154468 = ORIENTED_EDGE('',*,*,#154469,.T.); +#154469 = EDGE_CURVE('',#154462,#154470,#154472,.T.); +#154470 = VERTEX_POINT('',#154471); +#154471 = CARTESIAN_POINT('',(120.449962,-107.618428,1.585)); +#154472 = CIRCLE('',#154473,0.1249997864); +#154473 = AXIS2_PLACEMENT_3D('',#154474,#154475,#154476); +#154474 = CARTESIAN_POINT('',(120.327364,-107.642814,1.585)); +#154475 = DIRECTION('',(0.,0.,-1.)); +#154476 = DIRECTION('',(-0.980785675968,0.195088333367,0.)); +#154477 = ORIENTED_EDGE('',*,*,#154478,.T.); +#154478 = EDGE_CURVE('',#154470,#154479,#154481,.T.); +#154479 = VERTEX_POINT('',#154480); +#154480 = CARTESIAN_POINT('',(120.449962,-108.8672,1.585)); +#154481 = LINE('',#154482,#154483); +#154482 = CARTESIAN_POINT('',(120.449962,-107.618428,1.585)); +#154483 = VECTOR('',#154484,1.); +#154484 = DIRECTION('',(0.,-1.,0.)); +#154485 = ORIENTED_EDGE('',*,*,#154486,.T.); +#154486 = EDGE_CURVE('',#154479,#154487,#154489,.T.); +#154487 = VERTEX_POINT('',#154488); +#154488 = CARTESIAN_POINT('',(120.221269,-108.907044,1.585)); +#154489 = CIRCLE('',#154490,0.124243345352); +#154490 = AXIS2_PLACEMENT_3D('',#154491,#154492,#154493); +#154491 = CARTESIAN_POINT('',(120.32800817782,-108.8434581778,1.585)); +#154492 = DIRECTION('',(-0.,0.,-1.)); +#154493 = DIRECTION('',(0.981572267174,-0.191091298378,-0.)); +#154494 = ORIENTED_EDGE('',*,*,#154495,.T.); +#154495 = EDGE_CURVE('',#154487,#154496,#154498,.T.); +#154496 = VERTEX_POINT('',#154497); +#154497 = CARTESIAN_POINT('',(120.103237,-108.963375,1.585)); +#154498 = LINE('',#154499,#154500); +#154499 = CARTESIAN_POINT('',(120.221269,-108.907044,1.585)); +#154500 = VECTOR('',#154501,1.); +#154501 = DIRECTION('',(-0.902488333165,-0.430714300321,0.)); +#154502 = ORIENTED_EDGE('',*,*,#154503,.T.); +#154503 = EDGE_CURVE('',#154496,#154504,#154506,.T.); +#154504 = VERTEX_POINT('',#154505); +#154505 = CARTESIAN_POINT('',(120.070221,-108.967814,1.585)); +#154506 = LINE('',#154507,#154508); +#154507 = CARTESIAN_POINT('',(120.103237,-108.963375,1.585)); +#154508 = VECTOR('',#154509,1.); +#154509 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#154510 = ORIENTED_EDGE('',*,*,#154511,.T.); +#154511 = EDGE_CURVE('',#154504,#154512,#154514,.T.); +#154512 = VERTEX_POINT('',#154513); +#154513 = CARTESIAN_POINT('',(119.788692,-108.965412,1.585)); +#154514 = LINE('',#154515,#154516); +#154515 = CARTESIAN_POINT('',(120.070221,-108.967814,1.585)); +#154516 = VECTOR('',#154517,1.); +#154517 = DIRECTION('',(-0.99996360464,8.531670195069E-03,0.)); +#154518 = ORIENTED_EDGE('',*,*,#154519,.T.); +#154519 = EDGE_CURVE('',#154512,#154520,#154522,.T.); +#154520 = VERTEX_POINT('',#154521); +#154521 = CARTESIAN_POINT('',(119.757176,-108.954617,1.585)); +#154522 = LINE('',#154523,#154524); +#154523 = CARTESIAN_POINT('',(119.788692,-108.965412,1.585)); +#154524 = VECTOR('',#154525,1.); +#154525 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#154526 = ORIENTED_EDGE('',*,*,#154527,.T.); +#154527 = EDGE_CURVE('',#154520,#154528,#154530,.T.); +#154528 = VERTEX_POINT('',#154529); +#154529 = CARTESIAN_POINT('',(119.56501,-108.855849,1.585)); +#154530 = LINE('',#154531,#154532); +#154531 = CARTESIAN_POINT('',(119.757176,-108.954617,1.585)); +#154532 = VECTOR('',#154533,1.); +#154533 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#154534 = ORIENTED_EDGE('',*,*,#154535,.T.); +#154535 = EDGE_CURVE('',#154528,#154536,#154538,.T.); +#154536 = VERTEX_POINT('',#154537); +#154537 = CARTESIAN_POINT('',(119.532412,-108.81708,1.585)); +#154538 = LINE('',#154539,#154540); +#154539 = CARTESIAN_POINT('',(119.56501,-108.855849,1.585)); +#154540 = VECTOR('',#154541,1.); +#154541 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#154542 = ORIENTED_EDGE('',*,*,#154543,.T.); +#154543 = EDGE_CURVE('',#154536,#154544,#154546,.T.); +#154544 = VERTEX_POINT('',#154545); +#154545 = CARTESIAN_POINT('',(119.435374,-108.618687,1.585)); +#154546 = LINE('',#154547,#154548); +#154547 = CARTESIAN_POINT('',(119.532412,-108.81708,1.585)); +#154548 = VECTOR('',#154549,1.); +#154549 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#154550 = ORIENTED_EDGE('',*,*,#154551,.T.); +#154551 = EDGE_CURVE('',#154544,#154552,#154554,.T.); +#154552 = VERTEX_POINT('',#154553); +#154553 = CARTESIAN_POINT('',(119.430935,-108.585671,1.585)); +#154554 = LINE('',#154555,#154556); +#154555 = CARTESIAN_POINT('',(119.435374,-108.618687,1.585)); +#154556 = VECTOR('',#154557,1.); +#154557 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#154558 = ORIENTED_EDGE('',*,*,#154559,.T.); +#154559 = EDGE_CURVE('',#154552,#154560,#154562,.T.); +#154560 = VERTEX_POINT('',#154561); +#154561 = CARTESIAN_POINT('',(119.433337,-107.618428,1.585)); +#154562 = LINE('',#154563,#154564); +#154563 = CARTESIAN_POINT('',(119.430935,-108.585671,1.585)); +#154564 = VECTOR('',#154565,1.); +#154565 = DIRECTION('',(2.483339340209E-03,0.999996916508,0.)); +#154566 = ORIENTED_EDGE('',*,*,#154567,.T.); +#154567 = EDGE_CURVE('',#154560,#154568,#154570,.T.); +#154568 = VERTEX_POINT('',#154569); +#154569 = CARTESIAN_POINT('',(119.452001,-107.573368,1.585)); +#154570 = LINE('',#154571,#154572); +#154571 = CARTESIAN_POINT('',(119.433337,-107.618428,1.585)); +#154572 = VECTOR('',#154573,1.); +#154573 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#154574 = ORIENTED_EDGE('',*,*,#154575,.T.); +#154575 = EDGE_CURVE('',#154568,#154403,#154576,.T.); +#154576 = LINE('',#154577,#154578); +#154577 = CARTESIAN_POINT('',(119.452001,-107.573368,1.585)); +#154578 = VECTOR('',#154579,1.); +#154579 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#154580 = PLANE('',#154581); +#154581 = AXIS2_PLACEMENT_3D('',#154582,#154583,#154584); +#154582 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154583 = DIRECTION('',(0.,0.,1.)); +#154584 = DIRECTION('',(1.,0.,-0.)); +#154585 = SHELL_BASED_SURFACE_MODEL('',(#154586)); +#154586 = OPEN_SHELL('',(#154587)); +#154587 = ADVANCED_FACE('',(#154588),#154938,.T.); +#154588 = FACE_BOUND('',#154589,.F.); +#154589 = EDGE_LOOP('',(#154590,#154600,#154608,#154616,#154624,#154632, + #154641,#154649,#154657,#154666,#154674,#154682,#154690,#154698, + #154706,#154714,#154722,#154730,#154738,#154746,#154754,#154762, + #154770,#154778,#154786,#154794,#154802,#154811,#154819,#154827, + #154836,#154844,#154852,#154860,#154868,#154876,#154884,#154892, + #154900,#154908,#154916,#154924,#154932)); +#154590 = ORIENTED_EDGE('',*,*,#154591,.T.); +#154591 = EDGE_CURVE('',#154592,#154594,#154596,.T.); +#154592 = VERTEX_POINT('',#154593); +#154593 = CARTESIAN_POINT('',(121.200774,-107.024595,1.585)); +#154594 = VERTEX_POINT('',#154595); +#154595 = CARTESIAN_POINT('',(121.408633,-106.922253,1.585)); +#154596 = LINE('',#154597,#154598); +#154597 = CARTESIAN_POINT('',(121.200774,-107.024595,1.585)); +#154598 = VECTOR('',#154599,1.); +#154599 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#154600 = ORIENTED_EDGE('',*,*,#154601,.T.); +#154601 = EDGE_CURVE('',#154594,#154602,#154604,.T.); +#154602 = VERTEX_POINT('',#154603); +#154603 = CARTESIAN_POINT('',(121.441649,-106.917814,1.585)); +#154604 = LINE('',#154605,#154606); +#154605 = CARTESIAN_POINT('',(121.408633,-106.922253,1.585)); +#154606 = VECTOR('',#154607,1.); +#154607 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#154608 = ORIENTED_EDGE('',*,*,#154609,.T.); +#154609 = EDGE_CURVE('',#154602,#154610,#154612,.T.); +#154610 = VERTEX_POINT('',#154611); +#154611 = CARTESIAN_POINT('',(121.882563,-106.919029,1.585)); +#154612 = LINE('',#154613,#154614); +#154613 = CARTESIAN_POINT('',(121.441649,-106.917814,1.585)); +#154614 = VECTOR('',#154615,1.); +#154615 = DIRECTION('',(0.999996203247,-2.755628959237E-03,0.)); +#154616 = ORIENTED_EDGE('',*,*,#154617,.T.); +#154617 = EDGE_CURVE('',#154610,#154618,#154620,.T.); +#154618 = VERTEX_POINT('',#154619); +#154619 = CARTESIAN_POINT('',(121.909748,-106.924229,1.585)); +#154620 = LINE('',#154621,#154622); +#154621 = CARTESIAN_POINT('',(121.882563,-106.919029,1.585)); +#154622 = VECTOR('',#154623,1.); +#154623 = DIRECTION('',(0.982192801029,-0.187875761095,0.)); +#154624 = ORIENTED_EDGE('',*,*,#154625,.T.); +#154625 = EDGE_CURVE('',#154618,#154626,#154628,.T.); +#154626 = VERTEX_POINT('',#154627); +#154627 = CARTESIAN_POINT('',(122.189266,-107.019933,1.585)); +#154628 = LINE('',#154629,#154630); +#154629 = CARTESIAN_POINT('',(121.909748,-106.924229,1.585)); +#154630 = VECTOR('',#154631,1.); +#154631 = DIRECTION('',(0.946081626447,-0.323928319384,0.)); +#154632 = ORIENTED_EDGE('',*,*,#154633,.T.); +#154633 = EDGE_CURVE('',#154626,#154634,#154636,.T.); +#154634 = VERTEX_POINT('',#154635); +#154635 = CARTESIAN_POINT('',(122.111728,-107.252546,1.585)); +#154636 = CIRCLE('',#154637,0.12499954004); +#154637 = AXIS2_PLACEMENT_3D('',#154638,#154639,#154640); +#154638 = CARTESIAN_POINT('',(122.12736298876,-107.1285281297,1.585)); +#154639 = DIRECTION('',(0.,0.,-1.)); +#154640 = DIRECTION('',(0.495225912188,0.868764234932,0.)); +#154641 = ORIENTED_EDGE('',*,*,#154642,.T.); +#154642 = EDGE_CURVE('',#154634,#154643,#154645,.T.); +#154643 = VERTEX_POINT('',#154644); +#154644 = CARTESIAN_POINT('',(121.849937,-107.167814,1.585)); +#154645 = LINE('',#154646,#154647); +#154646 = CARTESIAN_POINT('',(122.111728,-107.252546,1.585)); +#154647 = VECTOR('',#154648,1.); +#154648 = DIRECTION('',(-0.951407352598,0.307935138337,0.)); +#154649 = ORIENTED_EDGE('',*,*,#154650,.T.); +#154650 = EDGE_CURVE('',#154643,#154651,#154653,.T.); +#154651 = VERTEX_POINT('',#154652); +#154652 = CARTESIAN_POINT('',(121.471158,-107.167814,1.585)); +#154653 = LINE('',#154654,#154655); +#154654 = CARTESIAN_POINT('',(121.849937,-107.167814,1.585)); +#154655 = VECTOR('',#154656,1.); +#154656 = DIRECTION('',(-1.,0.,0.)); +#154657 = ORIENTED_EDGE('',*,*,#154658,.T.); +#154658 = EDGE_CURVE('',#154651,#154659,#154661,.T.); +#154659 = VERTEX_POINT('',#154660); +#154660 = CARTESIAN_POINT('',(121.223792,-107.415179,1.585)); +#154661 = CIRCLE('',#154662,0.347626269899); +#154662 = AXIS2_PLACEMENT_3D('',#154663,#154664,#154665); +#154663 = CARTESIAN_POINT('',(121.55990006136,-107.5039224201,1.585)); +#154664 = DIRECTION('',(0.,0.,1.)); +#154665 = DIRECTION('',(-0.255280078187,0.966867147896,0.)); +#154666 = ORIENTED_EDGE('',*,*,#154667,.T.); +#154667 = EDGE_CURVE('',#154659,#154668,#154670,.T.); +#154668 = VERTEX_POINT('',#154669); +#154669 = CARTESIAN_POINT('',(121.223792,-107.527592,1.585)); +#154670 = LINE('',#154671,#154672); +#154671 = CARTESIAN_POINT('',(121.223792,-107.415179,1.585)); +#154672 = VECTOR('',#154673,1.); +#154673 = DIRECTION('',(0.,-1.,0.)); +#154674 = ORIENTED_EDGE('',*,*,#154675,.T.); +#154675 = EDGE_CURVE('',#154668,#154676,#154678,.T.); +#154676 = VERTEX_POINT('',#154677); +#154677 = CARTESIAN_POINT('',(121.287238,-107.654484,1.585)); +#154678 = LINE('',#154679,#154680); +#154679 = CARTESIAN_POINT('',(121.223792,-107.527592,1.585)); +#154680 = VECTOR('',#154681,1.); +#154681 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#154682 = ORIENTED_EDGE('',*,*,#154683,.T.); +#154683 = EDGE_CURVE('',#154676,#154684,#154686,.T.); +#154684 = VERTEX_POINT('',#154685); +#154685 = CARTESIAN_POINT('',(121.344264,-107.71151,1.585)); +#154686 = LINE('',#154687,#154688); +#154687 = CARTESIAN_POINT('',(121.287238,-107.654484,1.585)); +#154688 = VECTOR('',#154689,1.); +#154689 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#154690 = ORIENTED_EDGE('',*,*,#154691,.T.); +#154691 = EDGE_CURVE('',#154684,#154692,#154694,.T.); +#154692 = VERTEX_POINT('',#154693); +#154693 = CARTESIAN_POINT('',(121.485276,-107.782016,1.585)); +#154694 = LINE('',#154695,#154696); +#154695 = CARTESIAN_POINT('',(121.344264,-107.71151,1.585)); +#154696 = VECTOR('',#154697,1.); +#154697 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#154698 = ORIENTED_EDGE('',*,*,#154699,.T.); +#154699 = EDGE_CURVE('',#154692,#154700,#154702,.T.); +#154700 = VERTEX_POINT('',#154701); +#154701 = CARTESIAN_POINT('',(121.840407,-107.873867,1.585)); +#154702 = LINE('',#154703,#154704); +#154703 = CARTESIAN_POINT('',(121.485276,-107.782016,1.585)); +#154704 = VECTOR('',#154705,1.); +#154705 = DIRECTION('',(0.968142433695,-0.250400135942,0.)); +#154706 = ORIENTED_EDGE('',*,*,#154707,.T.); +#154707 = EDGE_CURVE('',#154700,#154708,#154710,.T.); +#154708 = VERTEX_POINT('',#154709); +#154709 = CARTESIAN_POINT('',(122.032574,-107.972635,1.585)); +#154710 = LINE('',#154711,#154712); +#154711 = CARTESIAN_POINT('',(121.840407,-107.873867,1.585)); +#154712 = VECTOR('',#154713,1.); +#154713 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#154714 = ORIENTED_EDGE('',*,*,#154715,.T.); +#154715 = EDGE_CURVE('',#154708,#154716,#154718,.T.); +#154716 = VERTEX_POINT('',#154717); +#154717 = CARTESIAN_POINT('',(122.145583,-108.087655,1.585)); +#154718 = LINE('',#154719,#154720); +#154719 = CARTESIAN_POINT('',(122.032574,-107.972635,1.585)); +#154720 = VECTOR('',#154721,1.); +#154721 = DIRECTION('',(0.700843514729,-0.713315055121,0.)); +#154722 = ORIENTED_EDGE('',*,*,#154723,.T.); +#154723 = EDGE_CURVE('',#154716,#154724,#154726,.T.); +#154724 = VERTEX_POINT('',#154725); +#154725 = CARTESIAN_POINT('',(122.247924,-108.295512,1.585)); +#154726 = LINE('',#154727,#154728); +#154727 = CARTESIAN_POINT('',(122.145583,-108.087655,1.585)); +#154728 = VECTOR('',#154729,1.); +#154729 = DIRECTION('',(0.44172363024,-0.897151177053,0.)); +#154730 = ORIENTED_EDGE('',*,*,#154731,.T.); +#154731 = EDGE_CURVE('',#154724,#154732,#154734,.T.); +#154732 = VERTEX_POINT('',#154733); +#154733 = CARTESIAN_POINT('',(122.252363,-108.328528,1.585)); +#154734 = LINE('',#154735,#154736); +#154735 = CARTESIAN_POINT('',(122.247924,-108.295512,1.585)); +#154736 = VECTOR('',#154737,1.); +#154737 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#154738 = ORIENTED_EDGE('',*,*,#154739,.T.); +#154739 = EDGE_CURVE('',#154732,#154740,#154742,.T.); +#154740 = VERTEX_POINT('',#154741); +#154741 = CARTESIAN_POINT('',(122.249961,-108.524343,1.585)); +#154742 = LINE('',#154743,#154744); +#154743 = CARTESIAN_POINT('',(122.252363,-108.328528,1.585)); +#154744 = VECTOR('',#154745,1.); +#154745 = DIRECTION('',(-1.226575749656E-02,-0.999924772767,0.)); +#154746 = ORIENTED_EDGE('',*,*,#154747,.T.); +#154747 = EDGE_CURVE('',#154740,#154748,#154750,.T.); +#154748 = VERTEX_POINT('',#154749); +#154749 = CARTESIAN_POINT('',(122.239166,-108.555859,1.585)); +#154750 = LINE('',#154751,#154752); +#154751 = CARTESIAN_POINT('',(122.249961,-108.524343,1.585)); +#154752 = VECTOR('',#154753,1.); +#154753 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#154754 = ORIENTED_EDGE('',*,*,#154755,.T.); +#154755 = EDGE_CURVE('',#154748,#154756,#154758,.T.); +#154756 = VERTEX_POINT('',#154757); +#154757 = CARTESIAN_POINT('',(122.140398,-108.748024,1.585)); +#154758 = LINE('',#154759,#154760); +#154759 = CARTESIAN_POINT('',(122.239166,-108.555859,1.585)); +#154760 = VECTOR('',#154761,1.); +#154761 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#154762 = ORIENTED_EDGE('',*,*,#154763,.T.); +#154763 = EDGE_CURVE('',#154756,#154764,#154766,.T.); +#154764 = VERTEX_POINT('',#154765); +#154765 = CARTESIAN_POINT('',(122.025382,-108.861033,1.585)); +#154766 = LINE('',#154767,#154768); +#154767 = CARTESIAN_POINT('',(122.140398,-108.748024,1.585)); +#154768 = VECTOR('',#154769,1.); +#154769 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#154770 = ORIENTED_EDGE('',*,*,#154771,.T.); +#154771 = EDGE_CURVE('',#154764,#154772,#154774,.T.); +#154772 = VERTEX_POINT('',#154773); +#154773 = CARTESIAN_POINT('',(121.817522,-108.963375,1.585)); +#154774 = LINE('',#154775,#154776); +#154775 = CARTESIAN_POINT('',(122.025382,-108.861033,1.585)); +#154776 = VECTOR('',#154777,1.); +#154777 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#154778 = ORIENTED_EDGE('',*,*,#154779,.T.); +#154779 = EDGE_CURVE('',#154772,#154780,#154782,.T.); +#154780 = VERTEX_POINT('',#154781); +#154781 = CARTESIAN_POINT('',(121.784506,-108.967814,1.585)); +#154782 = LINE('',#154783,#154784); +#154783 = CARTESIAN_POINT('',(121.817522,-108.963375,1.585)); +#154784 = VECTOR('',#154785,1.); +#154785 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#154786 = ORIENTED_EDGE('',*,*,#154787,.T.); +#154787 = EDGE_CURVE('',#154780,#154788,#154790,.T.); +#154788 = VERTEX_POINT('',#154789); +#154789 = CARTESIAN_POINT('',(121.331549,-108.965412,1.585)); +#154790 = LINE('',#154791,#154792); +#154791 = CARTESIAN_POINT('',(121.784506,-108.967814,1.585)); +#154792 = VECTOR('',#154793,1.); +#154793 = DIRECTION('',(-0.999985939755,5.302857064344E-03,0.)); +#154794 = ORIENTED_EDGE('',*,*,#154795,.T.); +#154795 = EDGE_CURVE('',#154788,#154796,#154798,.T.); +#154796 = VERTEX_POINT('',#154797); +#154797 = CARTESIAN_POINT('',(121.036889,-108.865695,1.585)); +#154798 = LINE('',#154799,#154800); +#154799 = CARTESIAN_POINT('',(121.331549,-108.965412,1.585)); +#154800 = VECTOR('',#154801,1.); +#154801 = DIRECTION('',(-0.947229710679,0.320555572727,0.)); +#154802 = ORIENTED_EDGE('',*,*,#154803,.T.); +#154803 = EDGE_CURVE('',#154796,#154804,#154806,.T.); +#154804 = VERTEX_POINT('',#154805); +#154805 = CARTESIAN_POINT('',(121.114426,-108.633082,1.585)); +#154806 = CIRCLE('',#154807,0.124999465062); +#154807 = AXIS2_PLACEMENT_3D('',#154808,#154809,#154810); +#154808 = CARTESIAN_POINT('',(121.09879193058,-108.7570999105,1.585)); +#154809 = DIRECTION('',(0.,0.,-1.)); +#154810 = DIRECTION('',(-0.495225563995,-0.868764433415,-0.)); +#154811 = ORIENTED_EDGE('',*,*,#154812,.T.); +#154812 = EDGE_CURVE('',#154804,#154813,#154815,.T.); +#154813 = VERTEX_POINT('',#154814); +#154814 = CARTESIAN_POINT('',(121.376221,-108.717814,1.585)); +#154815 = LINE('',#154816,#154817); +#154816 = CARTESIAN_POINT('',(121.114426,-108.633082,1.585)); +#154817 = VECTOR('',#154818,1.); +#154818 = DIRECTION('',(0.951408731017,-0.307930879492,0.)); +#154819 = ORIENTED_EDGE('',*,*,#154820,.T.); +#154820 = EDGE_CURVE('',#154813,#154821,#154823,.T.); +#154821 = VERTEX_POINT('',#154822); +#154822 = CARTESIAN_POINT('',(121.754997,-108.717814,1.585)); +#154823 = LINE('',#154824,#154825); +#154824 = CARTESIAN_POINT('',(121.376221,-108.717814,1.585)); +#154825 = VECTOR('',#154826,1.); +#154826 = DIRECTION('',(1.,0.,0.)); +#154827 = ORIENTED_EDGE('',*,*,#154828,.T.); +#154828 = EDGE_CURVE('',#154821,#154829,#154831,.T.); +#154829 = VERTEX_POINT('',#154830); +#154830 = CARTESIAN_POINT('',(122.002363,-108.470448,1.585)); +#154831 = CIRCLE('',#154832,0.347641001424); +#154832 = AXIS2_PLACEMENT_3D('',#154833,#154834,#154835); +#154833 = CARTESIAN_POINT('',(121.66624260111,-108.3816936011,1.585)); +#154834 = DIRECTION('',(0.,0.,1.)); +#154835 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#154836 = ORIENTED_EDGE('',*,*,#154837,.T.); +#154837 = EDGE_CURVE('',#154829,#154838,#154840,.T.); +#154838 = VERTEX_POINT('',#154839); +#154839 = CARTESIAN_POINT('',(122.002363,-108.358036,1.585)); +#154840 = LINE('',#154841,#154842); +#154841 = CARTESIAN_POINT('',(122.002363,-108.470448,1.585)); +#154842 = VECTOR('',#154843,1.); +#154843 = DIRECTION('',(0.,1.,0.)); +#154844 = ORIENTED_EDGE('',*,*,#154845,.T.); +#154845 = EDGE_CURVE('',#154838,#154846,#154848,.T.); +#154846 = VERTEX_POINT('',#154847); +#154847 = CARTESIAN_POINT('',(121.938917,-108.231145,1.585)); +#154848 = LINE('',#154849,#154850); +#154849 = CARTESIAN_POINT('',(122.002363,-108.358036,1.585)); +#154850 = VECTOR('',#154851,1.); +#154851 = DIRECTION('',(-0.447216415007,0.894425781241,0.)); +#154852 = ORIENTED_EDGE('',*,*,#154853,.T.); +#154853 = EDGE_CURVE('',#154846,#154854,#154856,.T.); +#154854 = VERTEX_POINT('',#154855); +#154855 = CARTESIAN_POINT('',(121.881888,-108.174116,1.585)); +#154856 = LINE('',#154857,#154858); +#154857 = CARTESIAN_POINT('',(121.938917,-108.231145,1.585)); +#154858 = VECTOR('',#154859,1.); +#154859 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#154860 = ORIENTED_EDGE('',*,*,#154861,.T.); +#154861 = EDGE_CURVE('',#154854,#154862,#154864,.T.); +#154862 = VERTEX_POINT('',#154863); +#154863 = CARTESIAN_POINT('',(121.740877,-108.103611,1.585)); +#154864 = LINE('',#154865,#154866); +#154865 = CARTESIAN_POINT('',(121.881888,-108.174116,1.585)); +#154866 = VECTOR('',#154867,1.); +#154867 = DIRECTION('',(-0.89442845959,0.44721105831,0.)); +#154868 = ORIENTED_EDGE('',*,*,#154869,.T.); +#154869 = EDGE_CURVE('',#154862,#154870,#154872,.T.); +#154870 = VERTEX_POINT('',#154871); +#154871 = CARTESIAN_POINT('',(121.385747,-108.01176,1.585)); +#154872 = LINE('',#154873,#154874); +#154873 = CARTESIAN_POINT('',(121.740877,-108.103611,1.585)); +#154874 = VECTOR('',#154875,1.); +#154875 = DIRECTION('',(-0.968142262763,0.250400796827,0.)); +#154876 = ORIENTED_EDGE('',*,*,#154877,.T.); +#154877 = EDGE_CURVE('',#154870,#154878,#154880,.T.); +#154878 = VERTEX_POINT('',#154879); +#154879 = CARTESIAN_POINT('',(121.193581,-107.912991,1.585)); +#154880 = LINE('',#154881,#154882); +#154881 = CARTESIAN_POINT('',(121.385747,-108.01176,1.585)); +#154882 = VECTOR('',#154883,1.); +#154883 = DIRECTION('',(-0.889399267098,0.457131210578,0.)); +#154884 = ORIENTED_EDGE('',*,*,#154885,.T.); +#154885 = EDGE_CURVE('',#154878,#154886,#154888,.T.); +#154886 = VERTEX_POINT('',#154887); +#154887 = CARTESIAN_POINT('',(121.080573,-107.797974,1.585)); +#154888 = LINE('',#154889,#154890); +#154889 = CARTESIAN_POINT('',(121.193581,-107.912991,1.585)); +#154890 = VECTOR('',#154891,1.); +#154891 = DIRECTION('',(-0.700849660337,0.71330901691,0.)); +#154892 = ORIENTED_EDGE('',*,*,#154893,.T.); +#154893 = EDGE_CURVE('',#154886,#154894,#154896,.T.); +#154894 = VERTEX_POINT('',#154895); +#154895 = CARTESIAN_POINT('',(120.978231,-107.590116,1.585)); +#154896 = LINE('',#154897,#154898); +#154897 = CARTESIAN_POINT('',(121.080573,-107.797974,1.585)); +#154898 = VECTOR('',#154899,1.); +#154899 = DIRECTION('',(-0.441725393771,0.897150308754,0.)); +#154900 = ORIENTED_EDGE('',*,*,#154901,.T.); +#154901 = EDGE_CURVE('',#154894,#154902,#154904,.T.); +#154902 = VERTEX_POINT('',#154903); +#154903 = CARTESIAN_POINT('',(120.973792,-107.5571,1.585)); +#154904 = LINE('',#154905,#154906); +#154905 = CARTESIAN_POINT('',(120.978231,-107.590116,1.585)); +#154906 = VECTOR('',#154907,1.); +#154907 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#154908 = ORIENTED_EDGE('',*,*,#154909,.T.); +#154909 = EDGE_CURVE('',#154902,#154910,#154912,.T.); +#154910 = VERTEX_POINT('',#154911); +#154911 = CARTESIAN_POINT('',(120.976194,-107.361285,1.585)); +#154912 = LINE('',#154913,#154914); +#154913 = CARTESIAN_POINT('',(120.973792,-107.5571,1.585)); +#154914 = VECTOR('',#154915,1.); +#154915 = DIRECTION('',(1.226575749656E-02,0.999924772767,0.)); +#154916 = ORIENTED_EDGE('',*,*,#154917,.T.); +#154917 = EDGE_CURVE('',#154910,#154918,#154920,.T.); +#154918 = VERTEX_POINT('',#154919); +#154919 = CARTESIAN_POINT('',(120.986988,-107.32977,1.585)); +#154920 = LINE('',#154921,#154922); +#154921 = CARTESIAN_POINT('',(120.976194,-107.361285,1.585)); +#154922 = VECTOR('',#154923,1.); +#154923 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#154924 = ORIENTED_EDGE('',*,*,#154925,.T.); +#154925 = EDGE_CURVE('',#154918,#154926,#154928,.T.); +#154926 = VERTEX_POINT('',#154927); +#154927 = CARTESIAN_POINT('',(121.085756,-107.137603,1.585)); +#154928 = LINE('',#154929,#154930); +#154929 = CARTESIAN_POINT('',(120.986988,-107.32977,1.585)); +#154930 = VECTOR('',#154931,1.); +#154931 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#154932 = ORIENTED_EDGE('',*,*,#154933,.T.); +#154933 = EDGE_CURVE('',#154926,#154592,#154934,.T.); +#154934 = LINE('',#154935,#154936); +#154935 = CARTESIAN_POINT('',(121.085756,-107.137603,1.585)); +#154936 = VECTOR('',#154937,1.); +#154937 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#154938 = PLANE('',#154939); +#154939 = AXIS2_PLACEMENT_3D('',#154940,#154941,#154942); +#154940 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154941 = DIRECTION('',(0.,0.,1.)); +#154942 = DIRECTION('',(1.,0.,-0.)); +#154943 = SHELL_BASED_SURFACE_MODEL('',(#154944)); +#154944 = OPEN_SHELL('',(#154945)); +#154945 = ADVANCED_FACE('',(#154946,#155182),#155233,.T.); +#154946 = FACE_BOUND('',#154947,.F.); +#154947 = EDGE_LOOP('',(#154948,#154958,#154966,#154974,#154982,#154990, + #154998,#155006,#155014,#155022,#155031,#155039,#155047,#155055, + #155063,#155071,#155079,#155088,#155096,#155104,#155112,#155120, + #155128,#155136,#155144,#155152,#155160,#155168,#155176)); +#154948 = ORIENTED_EDGE('',*,*,#154949,.T.); +#154949 = EDGE_CURVE('',#154950,#154952,#154954,.T.); +#154950 = VERTEX_POINT('',#154951); +#154951 = CARTESIAN_POINT('',(128.667384,-107.61929,1.585)); +#154952 = VERTEX_POINT('',#154953); +#154953 = CARTESIAN_POINT('',(128.865776,-107.522253,1.585)); +#154954 = LINE('',#154955,#154956); +#154955 = CARTESIAN_POINT('',(128.667384,-107.61929,1.585)); +#154956 = VECTOR('',#154957,1.); +#154957 = DIRECTION('',(0.898303312265,0.439375874593,0.)); +#154958 = ORIENTED_EDGE('',*,*,#154959,.T.); +#154959 = EDGE_CURVE('',#154952,#154960,#154962,.T.); +#154960 = VERTEX_POINT('',#154961); +#154961 = CARTESIAN_POINT('',(128.898792,-107.517814,1.585)); +#154962 = LINE('',#154963,#154964); +#154963 = CARTESIAN_POINT('',(128.865776,-107.522253,1.585)); +#154964 = VECTOR('',#154965,1.); +#154965 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#154966 = ORIENTED_EDGE('',*,*,#154967,.T.); +#154967 = EDGE_CURVE('',#154960,#154968,#154970,.T.); +#154968 = VERTEX_POINT('',#154969); +#154969 = CARTESIAN_POINT('',(129.266035,-107.520216,1.585)); +#154970 = LINE('',#154971,#154972); +#154971 = CARTESIAN_POINT('',(128.898792,-107.517814,1.585)); +#154972 = VECTOR('',#154973,1.); +#154973 = DIRECTION('',(0.999978610776,-6.540488513295E-03,0.)); +#154974 = ORIENTED_EDGE('',*,*,#154975,.T.); +#154975 = EDGE_CURVE('',#154968,#154976,#154978,.T.); +#154976 = VERTEX_POINT('',#154977); +#154977 = CARTESIAN_POINT('',(129.297551,-107.531011,1.585)); +#154978 = LINE('',#154979,#154980); +#154979 = CARTESIAN_POINT('',(129.266035,-107.520216,1.585)); +#154980 = VECTOR('',#154981,1.); +#154981 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#154982 = ORIENTED_EDGE('',*,*,#154983,.T.); +#154983 = EDGE_CURVE('',#154976,#154984,#154986,.T.); +#154984 = VERTEX_POINT('',#154985); +#154985 = CARTESIAN_POINT('',(129.489716,-107.629779,1.585)); +#154986 = LINE('',#154987,#154988); +#154987 = CARTESIAN_POINT('',(129.297551,-107.531011,1.585)); +#154988 = VECTOR('',#154989,1.); +#154989 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#154990 = ORIENTED_EDGE('',*,*,#154991,.T.); +#154991 = EDGE_CURVE('',#154984,#154992,#154994,.T.); +#154992 = VERTEX_POINT('',#154993); +#154993 = CARTESIAN_POINT('',(129.522313,-107.668549,1.585)); +#154994 = LINE('',#154995,#154996); +#154995 = CARTESIAN_POINT('',(129.489716,-107.629779,1.585)); +#154996 = VECTOR('',#154997,1.); +#154997 = DIRECTION('',(0.643541585038,-0.765411149858,0.)); +#154998 = ORIENTED_EDGE('',*,*,#154999,.T.); +#154999 = EDGE_CURVE('',#154992,#155000,#155002,.T.); +#155000 = VERTEX_POINT('',#155001); +#155001 = CARTESIAN_POINT('',(129.619353,-107.866941,1.585)); +#155002 = LINE('',#155003,#155004); +#155003 = CARTESIAN_POINT('',(129.522313,-107.668549,1.585)); +#155004 = VECTOR('',#155005,1.); +#155005 = DIRECTION('',(0.439386835897,-0.898297950816,0.)); +#155006 = ORIENTED_EDGE('',*,*,#155007,.T.); +#155007 = EDGE_CURVE('',#155000,#155008,#155010,.T.); +#155008 = VERTEX_POINT('',#155009); +#155009 = CARTESIAN_POINT('',(129.623792,-107.899957,1.585)); +#155010 = LINE('',#155011,#155012); +#155011 = CARTESIAN_POINT('',(129.619353,-107.866941,1.585)); +#155012 = VECTOR('',#155013,1.); +#155013 = DIRECTION('',(0.133250982623,-0.991082325355,0.)); +#155014 = ORIENTED_EDGE('',*,*,#155015,.T.); +#155015 = EDGE_CURVE('',#155008,#155016,#155018,.T.); +#155016 = VERTEX_POINT('',#155017); +#155017 = CARTESIAN_POINT('',(129.62139,-108.095771,1.585)); +#155018 = LINE('',#155019,#155020); +#155019 = CARTESIAN_POINT('',(129.623792,-107.899957,1.585)); +#155020 = VECTOR('',#155021,1.); +#155021 = DIRECTION('',(-1.226582012705E-02,-0.999924771999,0.)); +#155022 = ORIENTED_EDGE('',*,*,#155023,.T.); +#155023 = EDGE_CURVE('',#155016,#155024,#155026,.T.); +#155024 = VERTEX_POINT('',#155025); +#155025 = CARTESIAN_POINT('',(129.523307,-108.193958,1.585)); +#155026 = CIRCLE('',#155027,0.124999730291); +#155027 = AXIS2_PLACEMENT_3D('',#155028,#155029,#155030); +#155028 = CARTESIAN_POINT('',(129.4987918965,-108.0713858079,1.585)); +#155029 = DIRECTION('',(0.,0.,-1.)); +#155030 = DIRECTION('',(0.980786944144,-0.195081957639,0.)); +#155031 = ORIENTED_EDGE('',*,*,#155032,.T.); +#155032 = EDGE_CURVE('',#155024,#155033,#155035,.T.); +#155033 = VERTEX_POINT('',#155034); +#155034 = CARTESIAN_POINT('',(128.766649,-108.345289,1.585)); +#155035 = LINE('',#155036,#155037); +#155036 = CARTESIAN_POINT('',(129.523307,-108.193958,1.585)); +#155037 = VECTOR('',#155038,1.); +#155038 = DIRECTION('',(-0.980580825222,-0.196115387482,0.)); +#155039 = ORIENTED_EDGE('',*,*,#155040,.T.); +#155040 = EDGE_CURVE('',#155033,#155041,#155043,.T.); +#155041 = VERTEX_POINT('',#155042); +#155042 = CARTESIAN_POINT('',(128.766649,-108.556162,1.585)); +#155043 = LINE('',#155044,#155045); +#155044 = CARTESIAN_POINT('',(128.766649,-108.345289,1.585)); +#155045 = VECTOR('',#155046,1.); +#155046 = DIRECTION('',(0.,-1.,0.)); +#155047 = ORIENTED_EDGE('',*,*,#155048,.T.); +#155048 = EDGE_CURVE('',#155041,#155049,#155051,.T.); +#155049 = VERTEX_POINT('',#155050); +#155050 = CARTESIAN_POINT('',(128.820532,-108.66393,1.585)); +#155051 = LINE('',#155052,#155053); +#155052 = CARTESIAN_POINT('',(128.766649,-108.556162,1.585)); +#155053 = VECTOR('',#155054,1.); +#155054 = DIRECTION('',(0.447206955813,-0.894430510812,0.)); +#155055 = ORIENTED_EDGE('',*,*,#155056,.T.); +#155056 = EDGE_CURVE('',#155049,#155057,#155059,.T.); +#155057 = VERTEX_POINT('',#155058); +#155058 = CARTESIAN_POINT('',(128.928301,-108.717814,1.585)); +#155059 = LINE('',#155060,#155061); +#155060 = CARTESIAN_POINT('',(128.820532,-108.66393,1.585)); +#155061 = VECTOR('',#155062,1.); +#155062 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#155063 = ORIENTED_EDGE('',*,*,#155064,.T.); +#155064 = EDGE_CURVE('',#155057,#155065,#155067,.T.); +#155065 = VERTEX_POINT('',#155066); +#155066 = CARTESIAN_POINT('',(129.212141,-108.717814,1.585)); +#155067 = LINE('',#155068,#155069); +#155068 = CARTESIAN_POINT('',(128.928301,-108.717814,1.585)); +#155069 = VECTOR('',#155070,1.); +#155070 = DIRECTION('',(1.,0.,0.)); +#155071 = ORIENTED_EDGE('',*,*,#155072,.T.); +#155072 = EDGE_CURVE('',#155065,#155073,#155075,.T.); +#155073 = VERTEX_POINT('',#155074); +#155074 = CARTESIAN_POINT('',(129.380061,-108.636539,1.585)); +#155075 = LINE('',#155076,#155077); +#155076 = CARTESIAN_POINT('',(129.212141,-108.717814,1.585)); +#155077 = VECTOR('',#155078,1.); +#155078 = DIRECTION('',(0.90011009407,0.435662505333,0.)); +#155079 = ORIENTED_EDGE('',*,*,#155080,.T.); +#155080 = EDGE_CURVE('',#155073,#155081,#155083,.T.); +#155081 = VERTEX_POINT('',#155082); +#155082 = CARTESIAN_POINT('',(129.489716,-108.855849,1.585)); +#155083 = CIRCLE('',#155084,0.124999889885); +#155084 = AXIS2_PLACEMENT_3D('',#155085,#155086,#155087); +#155085 = CARTESIAN_POINT('',(129.41307660067,-108.7570999496,1.585)); +#155086 = DIRECTION('',(0.,0.,-1.)); +#155087 = DIRECTION('',(-0.264125038109,0.964488446921,-0.)); +#155088 = ORIENTED_EDGE('',*,*,#155089,.T.); +#155089 = EDGE_CURVE('',#155081,#155090,#155092,.T.); +#155090 = VERTEX_POINT('',#155091); +#155091 = CARTESIAN_POINT('',(129.274665,-108.963375,1.585)); +#155092 = LINE('',#155093,#155094); +#155093 = CARTESIAN_POINT('',(129.489716,-108.855849,1.585)); +#155094 = VECTOR('',#155095,1.); +#155095 = DIRECTION('',(-0.894426359171,-0.447215259154,0.)); +#155096 = ORIENTED_EDGE('',*,*,#155097,.T.); +#155097 = EDGE_CURVE('',#155090,#155098,#155100,.T.); +#155098 = VERTEX_POINT('',#155099); +#155099 = CARTESIAN_POINT('',(129.241649,-108.967814,1.585)); +#155100 = LINE('',#155101,#155102); +#155101 = CARTESIAN_POINT('',(129.274665,-108.963375,1.585)); +#155102 = VECTOR('',#155103,1.); +#155103 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#155104 = ORIENTED_EDGE('',*,*,#155105,.T.); +#155105 = EDGE_CURVE('',#155098,#155106,#155108,.T.); +#155106 = VERTEX_POINT('',#155107); +#155107 = CARTESIAN_POINT('',(128.874406,-108.965412,1.585)); +#155108 = LINE('',#155109,#155110); +#155109 = CARTESIAN_POINT('',(129.241649,-108.967814,1.585)); +#155110 = VECTOR('',#155111,1.); +#155111 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#155112 = ORIENTED_EDGE('',*,*,#155113,.T.); +#155113 = EDGE_CURVE('',#155106,#155114,#155116,.T.); +#155114 = VERTEX_POINT('',#155115); +#155115 = CARTESIAN_POINT('',(128.84289,-108.954617,1.585)); +#155116 = LINE('',#155117,#155118); +#155117 = CARTESIAN_POINT('',(128.874406,-108.965412,1.585)); +#155118 = VECTOR('',#155119,1.); +#155119 = DIRECTION('',(-0.946042469829,0.324042659659,0.)); +#155120 = ORIENTED_EDGE('',*,*,#155121,.T.); +#155121 = EDGE_CURVE('',#155114,#155122,#155124,.T.); +#155122 = VERTEX_POINT('',#155123); +#155123 = CARTESIAN_POINT('',(128.650724,-108.855849,1.585)); +#155124 = LINE('',#155125,#155126); +#155125 = CARTESIAN_POINT('',(128.84289,-108.954617,1.585)); +#155126 = VECTOR('',#155127,1.); +#155127 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#155128 = ORIENTED_EDGE('',*,*,#155129,.T.); +#155129 = EDGE_CURVE('',#155122,#155130,#155132,.T.); +#155130 = VERTEX_POINT('',#155131); +#155131 = CARTESIAN_POINT('',(128.618126,-108.81708,1.585)); +#155132 = LINE('',#155133,#155134); +#155133 = CARTESIAN_POINT('',(128.650724,-108.855849,1.585)); +#155134 = VECTOR('',#155135,1.); +#155135 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#155136 = ORIENTED_EDGE('',*,*,#155137,.T.); +#155137 = EDGE_CURVE('',#155130,#155138,#155140,.T.); +#155138 = VERTEX_POINT('',#155139); +#155139 = CARTESIAN_POINT('',(128.521088,-108.618687,1.585)); +#155140 = LINE('',#155141,#155142); +#155141 = CARTESIAN_POINT('',(128.618126,-108.81708,1.585)); +#155142 = VECTOR('',#155143,1.); +#155143 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#155144 = ORIENTED_EDGE('',*,*,#155145,.T.); +#155145 = EDGE_CURVE('',#155138,#155146,#155148,.T.); +#155146 = VERTEX_POINT('',#155147); +#155147 = CARTESIAN_POINT('',(128.516649,-108.585671,1.585)); +#155148 = LINE('',#155149,#155150); +#155149 = CARTESIAN_POINT('',(128.521088,-108.618687,1.585)); +#155150 = VECTOR('',#155151,1.); +#155151 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#155152 = ORIENTED_EDGE('',*,*,#155153,.T.); +#155153 = EDGE_CURVE('',#155146,#155154,#155156,.T.); +#155154 = VERTEX_POINT('',#155155); +#155155 = CARTESIAN_POINT('',(128.519051,-107.875571,1.585)); +#155156 = LINE('',#155157,#155158); +#155157 = CARTESIAN_POINT('',(128.516649,-108.585671,1.585)); +#155158 = VECTOR('',#155159,1.); +#155159 = DIRECTION('',(3.382602813837E-03,0.999994278983,0.)); +#155160 = ORIENTED_EDGE('',*,*,#155161,.T.); +#155161 = EDGE_CURVE('',#155154,#155162,#155164,.T.); +#155162 = VERTEX_POINT('',#155163); +#155163 = CARTESIAN_POINT('',(128.529845,-107.844056,1.585)); +#155164 = LINE('',#155165,#155166); +#155165 = CARTESIAN_POINT('',(128.519051,-107.875571,1.585)); +#155166 = VECTOR('',#155167,1.); +#155167 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#155168 = ORIENTED_EDGE('',*,*,#155169,.T.); +#155169 = EDGE_CURVE('',#155162,#155170,#155172,.T.); +#155170 = VERTEX_POINT('',#155171); +#155171 = CARTESIAN_POINT('',(128.628613,-107.651889,1.585)); +#155172 = LINE('',#155173,#155174); +#155173 = CARTESIAN_POINT('',(128.529845,-107.844056,1.585)); +#155174 = VECTOR('',#155175,1.); +#155175 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#155176 = ORIENTED_EDGE('',*,*,#155177,.T.); +#155177 = EDGE_CURVE('',#155170,#154950,#155178,.T.); +#155178 = LINE('',#155179,#155180); +#155179 = CARTESIAN_POINT('',(128.628613,-107.651889,1.585)); +#155180 = VECTOR('',#155181,1.); +#155181 = DIRECTION('',(0.765399877272,0.643554992112,0.)); +#155182 = FACE_BOUND('',#155183,.F.); +#155183 = EDGE_LOOP('',(#155184,#155195,#155203,#155211,#155219,#155227) + ); +#155184 = ORIENTED_EDGE('',*,*,#155185,.T.); +#155185 = EDGE_CURVE('',#155186,#155188,#155190,.T.); +#155186 = VERTEX_POINT('',#155187); +#155187 = CARTESIAN_POINT('',(129.319907,-107.821697,1.585)); +#155188 = VERTEX_POINT('',#155189); +#155189 = CARTESIAN_POINT('',(128.820532,-107.821698,1.585)); +#155190 = CIRCLE('',#155191,0.441959003379); +#155191 = AXIS2_PLACEMENT_3D('',#155192,#155193,#155194); +#155192 = CARTESIAN_POINT('',(129.07022023025,-108.1863670943,1.585)); +#155193 = DIRECTION('',(0.,0.,1.)); +#155194 = DIRECTION('',(0.564954594972,0.825121994386,-0.)); +#155195 = ORIENTED_EDGE('',*,*,#155196,.T.); +#155196 = EDGE_CURVE('',#155188,#155197,#155199,.T.); +#155197 = VERTEX_POINT('',#155198); +#155198 = CARTESIAN_POINT('',(128.766649,-107.929465,1.585)); +#155199 = LINE('',#155200,#155201); +#155200 = CARTESIAN_POINT('',(128.820532,-107.821698,1.585)); +#155201 = VECTOR('',#155202,1.); +#155202 = DIRECTION('',(-0.447210275635,-0.894428850925,0.)); +#155203 = ORIENTED_EDGE('',*,*,#155204,.T.); +#155204 = EDGE_CURVE('',#155197,#155205,#155207,.T.); +#155205 = VERTEX_POINT('',#155206); +#155206 = CARTESIAN_POINT('',(128.766649,-108.090337,1.585)); +#155207 = LINE('',#155208,#155209); +#155208 = CARTESIAN_POINT('',(128.766649,-107.929465,1.585)); +#155209 = VECTOR('',#155210,1.); +#155210 = DIRECTION('',(0.,-1.,0.)); +#155211 = ORIENTED_EDGE('',*,*,#155212,.T.); +#155212 = EDGE_CURVE('',#155205,#155213,#155215,.T.); +#155213 = VERTEX_POINT('',#155214); +#155214 = CARTESIAN_POINT('',(129.373792,-107.968909,1.585)); +#155215 = LINE('',#155216,#155217); +#155216 = CARTESIAN_POINT('',(128.766649,-108.090337,1.585)); +#155217 = VECTOR('',#155218,1.); +#155218 = DIRECTION('',(0.980580862045,0.196115203365,0.)); +#155219 = ORIENTED_EDGE('',*,*,#155220,.T.); +#155220 = EDGE_CURVE('',#155213,#155221,#155223,.T.); +#155221 = VERTEX_POINT('',#155222); +#155222 = CARTESIAN_POINT('',(129.373792,-107.929465,1.585)); +#155223 = LINE('',#155224,#155225); +#155224 = CARTESIAN_POINT('',(129.373792,-107.968909,1.585)); +#155225 = VECTOR('',#155226,1.); +#155226 = DIRECTION('',(0.,1.,0.)); +#155227 = ORIENTED_EDGE('',*,*,#155228,.T.); +#155228 = EDGE_CURVE('',#155221,#155186,#155229,.T.); +#155229 = LINE('',#155230,#155231); +#155230 = CARTESIAN_POINT('',(129.373792,-107.929465,1.585)); +#155231 = VECTOR('',#155232,1.); +#155232 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#155233 = PLANE('',#155234); +#155234 = AXIS2_PLACEMENT_3D('',#155235,#155236,#155237); +#155235 = CARTESIAN_POINT('',(0.,0.,1.585)); +#155236 = DIRECTION('',(0.,0.,1.)); +#155237 = DIRECTION('',(1.,0.,-0.)); +#155238 = SHELL_BASED_SURFACE_MODEL('',(#155239)); +#155239 = OPEN_SHELL('',(#155240)); +#155240 = ADVANCED_FACE('',(#155241),#155583,.T.); +#155241 = FACE_BOUND('',#155242,.F.); +#155242 = EDGE_LOOP('',(#155243,#155253,#155261,#155269,#155277,#155285, + #155294,#155302,#155310,#155318,#155327,#155335,#155343,#155351, + #155359,#155367,#155375,#155383,#155391,#155399,#155407,#155415, + #155423,#155431,#155439,#155447,#155455,#155464,#155472,#155480, + #155488,#155497,#155505,#155513,#155521,#155529,#155537,#155545, + #155553,#155561,#155569,#155577)); +#155243 = ORIENTED_EDGE('',*,*,#155244,.T.); +#155244 = EDGE_CURVE('',#155245,#155247,#155249,.T.); +#155245 = VERTEX_POINT('',#155246); +#155246 = CARTESIAN_POINT('',(131.58167,-107.61929,1.585)); +#155247 = VERTEX_POINT('',#155248); +#155248 = CARTESIAN_POINT('',(131.780062,-107.522253,1.585)); +#155249 = LINE('',#155250,#155251); +#155250 = CARTESIAN_POINT('',(131.58167,-107.61929,1.585)); +#155251 = VECTOR('',#155252,1.); +#155252 = DIRECTION('',(0.898303312265,0.439375874593,0.)); +#155253 = ORIENTED_EDGE('',*,*,#155254,.T.); +#155254 = EDGE_CURVE('',#155247,#155255,#155257,.T.); +#155255 = VERTEX_POINT('',#155256); +#155256 = CARTESIAN_POINT('',(131.813078,-107.517814,1.585)); +#155257 = LINE('',#155258,#155259); +#155258 = CARTESIAN_POINT('',(131.780062,-107.522253,1.585)); +#155259 = VECTOR('',#155260,1.); +#155260 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#155261 = ORIENTED_EDGE('',*,*,#155262,.T.); +#155262 = EDGE_CURVE('',#155255,#155263,#155265,.T.); +#155263 = VERTEX_POINT('',#155264); +#155264 = CARTESIAN_POINT('',(132.094606,-107.520216,1.585)); +#155265 = LINE('',#155266,#155267); +#155266 = CARTESIAN_POINT('',(131.813078,-107.517814,1.585)); +#155267 = VECTOR('',#155268,1.); +#155268 = DIRECTION('',(0.999963604381,-8.531700497736E-03,0.)); +#155269 = ORIENTED_EDGE('',*,*,#155270,.T.); +#155270 = EDGE_CURVE('',#155263,#155271,#155273,.T.); +#155271 = VERTEX_POINT('',#155272); +#155272 = CARTESIAN_POINT('',(132.126121,-107.53101,1.585)); +#155273 = LINE('',#155274,#155275); +#155274 = CARTESIAN_POINT('',(132.094606,-107.520216,1.585)); +#155275 = VECTOR('',#155276,1.); +#155276 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#155277 = ORIENTED_EDGE('',*,*,#155278,.T.); +#155278 = EDGE_CURVE('',#155271,#155279,#155281,.T.); +#155279 = VERTEX_POINT('',#155280); +#155280 = CARTESIAN_POINT('',(132.318288,-107.629778,1.585)); +#155281 = LINE('',#155282,#155283); +#155282 = CARTESIAN_POINT('',(132.126121,-107.53101,1.585)); +#155283 = VECTOR('',#155284,1.); +#155284 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#155285 = ORIENTED_EDGE('',*,*,#155286,.T.); +#155286 = EDGE_CURVE('',#155279,#155287,#155289,.T.); +#155287 = VERTEX_POINT('',#155288); +#155288 = CARTESIAN_POINT('',(132.208633,-107.849089,1.585)); +#155289 = CIRCLE('',#155290,0.125000271896); +#155290 = AXIS2_PLACEMENT_3D('',#155291,#155292,#155293); +#155291 = CARTESIAN_POINT('',(132.24164884032,-107.7285277198,1.585)); +#155292 = DIRECTION('',(0.,0.,-1.)); +#155293 = DIRECTION('',(0.613111943766,0.789996040757,0.)); +#155294 = ORIENTED_EDGE('',*,*,#155295,.T.); +#155295 = EDGE_CURVE('',#155287,#155296,#155298,.T.); +#155296 = VERTEX_POINT('',#155297); +#155297 = CARTESIAN_POINT('',(132.040711,-107.767814,1.585)); +#155298 = LINE('',#155299,#155300); +#155299 = CARTESIAN_POINT('',(132.208633,-107.849089,1.585)); +#155300 = VECTOR('',#155301,1.); +#155301 = DIRECTION('',(-0.900112128849,0.435658301308,0.)); +#155302 = ORIENTED_EDGE('',*,*,#155303,.T.); +#155303 = EDGE_CURVE('',#155296,#155304,#155306,.T.); +#155304 = VERTEX_POINT('',#155305); +#155305 = CARTESIAN_POINT('',(131.842587,-107.767814,1.585)); +#155306 = LINE('',#155307,#155308); +#155307 = CARTESIAN_POINT('',(132.040711,-107.767814,1.585)); +#155308 = VECTOR('',#155309,1.); +#155309 = DIRECTION('',(-1.,0.,0.)); +#155310 = ORIENTED_EDGE('',*,*,#155311,.T.); +#155311 = EDGE_CURVE('',#155304,#155312,#155314,.T.); +#155312 = VERTEX_POINT('',#155313); +#155313 = CARTESIAN_POINT('',(131.734818,-107.821698,1.585)); +#155314 = LINE('',#155315,#155316); +#155315 = CARTESIAN_POINT('',(131.842587,-107.767814,1.585)); +#155316 = VECTOR('',#155317,1.); +#155317 = DIRECTION('',(-0.894428850894,-0.447210275697,0.)); +#155318 = ORIENTED_EDGE('',*,*,#155319,.T.); +#155319 = EDGE_CURVE('',#155312,#155320,#155322,.T.); +#155320 = VERTEX_POINT('',#155321); +#155321 = CARTESIAN_POINT('',(131.734818,-108.06393,1.585)); +#155322 = CIRCLE('',#155323,0.161958812155); +#155323 = AXIS2_PLACEMENT_3D('',#155324,#155325,#155326); +#155324 = CARTESIAN_POINT('',(131.84234274775,-107.942814,1.585)); +#155325 = DIRECTION('',(0.,0.,1.)); +#155326 = DIRECTION('',(-0.663901805151,0.74781975978,0.)); +#155327 = ORIENTED_EDGE('',*,*,#155328,.T.); +#155328 = EDGE_CURVE('',#155320,#155329,#155331,.T.); +#155329 = VERTEX_POINT('',#155330); +#155330 = CARTESIAN_POINT('',(131.842587,-108.117814,1.585)); +#155331 = LINE('',#155332,#155333); +#155332 = CARTESIAN_POINT('',(131.734818,-108.06393,1.585)); +#155333 = VECTOR('',#155334,1.); +#155334 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#155335 = ORIENTED_EDGE('',*,*,#155336,.T.); +#155336 = EDGE_CURVE('',#155329,#155337,#155339,.T.); +#155337 = VERTEX_POINT('',#155338); +#155338 = CARTESIAN_POINT('',(132.094606,-108.120216,1.585)); +#155339 = LINE('',#155340,#155341); +#155340 = CARTESIAN_POINT('',(131.842587,-108.117814,1.585)); +#155341 = VECTOR('',#155342,1.); +#155342 = DIRECTION('',(0.999954582852,-9.530594550471E-03,0.)); +#155343 = ORIENTED_EDGE('',*,*,#155344,.T.); +#155344 = EDGE_CURVE('',#155337,#155345,#155347,.T.); +#155345 = VERTEX_POINT('',#155346); +#155346 = CARTESIAN_POINT('',(132.126121,-108.13101,1.585)); +#155347 = LINE('',#155348,#155349); +#155348 = CARTESIAN_POINT('',(132.094606,-108.120216,1.585)); +#155349 = VECTOR('',#155350,1.); +#155350 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#155351 = ORIENTED_EDGE('',*,*,#155352,.T.); +#155352 = EDGE_CURVE('',#155345,#155353,#155355,.T.); +#155353 = VERTEX_POINT('',#155354); +#155354 = CARTESIAN_POINT('',(132.318288,-108.229778,1.585)); +#155355 = LINE('',#155356,#155357); +#155356 = CARTESIAN_POINT('',(132.126121,-108.13101,1.585)); +#155357 = VECTOR('',#155358,1.); +#155358 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#155359 = ORIENTED_EDGE('',*,*,#155360,.T.); +#155360 = EDGE_CURVE('',#155353,#155361,#155363,.T.); +#155361 = VERTEX_POINT('',#155362); +#155362 = CARTESIAN_POINT('',(132.350886,-108.268549,1.585)); +#155363 = LINE('',#155364,#155365); +#155364 = CARTESIAN_POINT('',(132.318288,-108.229778,1.585)); +#155365 = VECTOR('',#155366,1.); +#155366 = DIRECTION('',(0.643543426558,-0.765409601543,0.)); +#155367 = ORIENTED_EDGE('',*,*,#155368,.T.); +#155368 = EDGE_CURVE('',#155361,#155369,#155371,.T.); +#155369 = VERTEX_POINT('',#155370); +#155370 = CARTESIAN_POINT('',(132.447924,-108.466941,1.585)); +#155371 = LINE('',#155372,#155373); +#155372 = CARTESIAN_POINT('',(132.350886,-108.268549,1.585)); +#155373 = VECTOR('',#155374,1.); +#155374 = DIRECTION('',(0.439379528383,-0.898301525123,0.)); +#155375 = ORIENTED_EDGE('',*,*,#155376,.T.); +#155376 = EDGE_CURVE('',#155369,#155377,#155379,.T.); +#155377 = VERTEX_POINT('',#155378); +#155378 = CARTESIAN_POINT('',(132.452363,-108.499957,1.585)); +#155379 = LINE('',#155380,#155381); +#155380 = CARTESIAN_POINT('',(132.447924,-108.466941,1.585)); +#155381 = VECTOR('',#155382,1.); +#155382 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#155383 = ORIENTED_EDGE('',*,*,#155384,.T.); +#155384 = EDGE_CURVE('',#155377,#155385,#155387,.T.); +#155385 = VERTEX_POINT('',#155386); +#155386 = CARTESIAN_POINT('',(132.449961,-108.610057,1.585)); +#155387 = LINE('',#155388,#155389); +#155388 = CARTESIAN_POINT('',(132.452363,-108.499957,1.585)); +#155389 = VECTOR('',#155390,1.); +#155390 = DIRECTION('',(-2.181134037059E-02,-0.999762104418,0.)); +#155391 = ORIENTED_EDGE('',*,*,#155392,.T.); +#155392 = EDGE_CURVE('',#155385,#155393,#155395,.T.); +#155393 = VERTEX_POINT('',#155394); +#155394 = CARTESIAN_POINT('',(132.439166,-108.641573,1.585)); +#155395 = LINE('',#155396,#155397); +#155396 = CARTESIAN_POINT('',(132.449961,-108.610057,1.585)); +#155397 = VECTOR('',#155398,1.); +#155398 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#155399 = ORIENTED_EDGE('',*,*,#155400,.T.); +#155400 = EDGE_CURVE('',#155393,#155401,#155403,.T.); +#155401 = VERTEX_POINT('',#155402); +#155402 = CARTESIAN_POINT('',(132.340398,-108.833739,1.585)); +#155403 = LINE('',#155404,#155405); +#155404 = CARTESIAN_POINT('',(132.439166,-108.641573,1.585)); +#155405 = VECTOR('',#155406,1.); +#155406 = DIRECTION('',(-0.457127549449,-0.889401148827,0.)); +#155407 = ORIENTED_EDGE('',*,*,#155408,.T.); +#155408 = EDGE_CURVE('',#155401,#155409,#155411,.T.); +#155409 = VERTEX_POINT('',#155410); +#155410 = CARTESIAN_POINT('',(132.301629,-108.866336,1.585)); +#155411 = LINE('',#155412,#155413); +#155412 = CARTESIAN_POINT('',(132.340398,-108.833739,1.585)); +#155413 = VECTOR('',#155414,1.); +#155414 = DIRECTION('',(-0.765402973459,-0.643551309702,0.)); +#155415 = ORIENTED_EDGE('',*,*,#155416,.T.); +#155416 = EDGE_CURVE('',#155409,#155417,#155419,.T.); +#155417 = VERTEX_POINT('',#155418); +#155418 = CARTESIAN_POINT('',(132.103236,-108.963375,1.585)); +#155419 = LINE('',#155420,#155421); +#155420 = CARTESIAN_POINT('',(132.301629,-108.866336,1.585)); +#155421 = VECTOR('',#155422,1.); +#155422 = DIRECTION('',(-0.898300612114,-0.439381395004,0.)); +#155423 = ORIENTED_EDGE('',*,*,#155424,.T.); +#155424 = EDGE_CURVE('',#155417,#155425,#155427,.T.); +#155425 = VERTEX_POINT('',#155426); +#155426 = CARTESIAN_POINT('',(132.07022,-108.967814,1.585)); +#155427 = LINE('',#155428,#155429); +#155428 = CARTESIAN_POINT('',(132.103236,-108.963375,1.585)); +#155429 = VECTOR('',#155430,1.); +#155430 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#155431 = ORIENTED_EDGE('',*,*,#155432,.T.); +#155432 = EDGE_CURVE('',#155425,#155433,#155435,.T.); +#155433 = VERTEX_POINT('',#155434); +#155434 = CARTESIAN_POINT('',(131.702977,-108.965412,1.585)); +#155435 = LINE('',#155436,#155437); +#155436 = CARTESIAN_POINT('',(132.07022,-108.967814,1.585)); +#155437 = VECTOR('',#155438,1.); +#155438 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#155439 = ORIENTED_EDGE('',*,*,#155440,.T.); +#155440 = EDGE_CURVE('',#155433,#155441,#155443,.T.); +#155441 = VERTEX_POINT('',#155442); +#155442 = CARTESIAN_POINT('',(131.671461,-108.954617,1.585)); +#155443 = LINE('',#155444,#155445); +#155444 = CARTESIAN_POINT('',(131.702977,-108.965412,1.585)); +#155445 = VECTOR('',#155446,1.); +#155446 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#155447 = ORIENTED_EDGE('',*,*,#155448,.T.); +#155448 = EDGE_CURVE('',#155441,#155449,#155451,.T.); +#155449 = VERTEX_POINT('',#155450); +#155450 = CARTESIAN_POINT('',(131.479296,-108.855849,1.585)); +#155451 = LINE('',#155452,#155453); +#155452 = CARTESIAN_POINT('',(131.671461,-108.954617,1.585)); +#155453 = VECTOR('',#155454,1.); +#155454 = DIRECTION('',(-0.889400181667,0.457129431181,0.)); +#155455 = ORIENTED_EDGE('',*,*,#155456,.T.); +#155456 = EDGE_CURVE('',#155449,#155457,#155459,.T.); +#155457 = VERTEX_POINT('',#155458); +#155458 = CARTESIAN_POINT('',(131.588951,-108.636539,1.585)); +#155459 = CIRCLE('',#155460,0.124999759312); +#155460 = AXIS2_PLACEMENT_3D('',#155461,#155462,#155463); +#155461 = CARTESIAN_POINT('',(131.55593480068,-108.7570996503,1.585)); +#155462 = DIRECTION('',(0.,0.,-1.)); +#155463 = DIRECTION('',(-0.61311158599,-0.789996318425,-0.)); +#155464 = ORIENTED_EDGE('',*,*,#155465,.T.); +#155465 = EDGE_CURVE('',#155457,#155466,#155468,.T.); +#155466 = VERTEX_POINT('',#155467); +#155467 = CARTESIAN_POINT('',(131.756872,-108.717814,1.585)); +#155468 = LINE('',#155469,#155470); +#155469 = CARTESIAN_POINT('',(131.588951,-108.636539,1.585)); +#155470 = VECTOR('',#155471,1.); +#155471 = DIRECTION('',(0.900111111467,-0.435660403312,0.)); +#155472 = ORIENTED_EDGE('',*,*,#155473,.T.); +#155473 = EDGE_CURVE('',#155466,#155474,#155476,.T.); +#155474 = VERTEX_POINT('',#155475); +#155475 = CARTESIAN_POINT('',(132.040711,-108.717814,1.585)); +#155476 = LINE('',#155477,#155478); +#155477 = CARTESIAN_POINT('',(131.756872,-108.717814,1.585)); +#155478 = VECTOR('',#155479,1.); +#155479 = DIRECTION('',(1.,0.,0.)); +#155480 = ORIENTED_EDGE('',*,*,#155481,.T.); +#155481 = EDGE_CURVE('',#155474,#155482,#155484,.T.); +#155482 = VERTEX_POINT('',#155483); +#155483 = CARTESIAN_POINT('',(132.148479,-108.66393,1.585)); +#155484 = LINE('',#155485,#155486); +#155485 = CARTESIAN_POINT('',(132.040711,-108.717814,1.585)); +#155486 = VECTOR('',#155487,1.); +#155487 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#155488 = ORIENTED_EDGE('',*,*,#155489,.T.); +#155489 = EDGE_CURVE('',#155482,#155490,#155492,.T.); +#155490 = VERTEX_POINT('',#155491); +#155491 = CARTESIAN_POINT('',(132.148479,-108.421697,1.585)); +#155492 = CIRCLE('',#155493,0.161958025739); +#155493 = AXIS2_PLACEMENT_3D('',#155494,#155495,#155496); +#155494 = CARTESIAN_POINT('',(132.040956,-108.5428135,1.585)); +#155495 = DIRECTION('',(0.,-0.,1.)); +#155496 = DIRECTION('',(0.66389423747,-0.747826478172,-0.)); +#155497 = ORIENTED_EDGE('',*,*,#155498,.T.); +#155498 = EDGE_CURVE('',#155490,#155499,#155501,.T.); +#155499 = VERTEX_POINT('',#155500); +#155500 = CARTESIAN_POINT('',(132.040711,-108.367814,1.585)); +#155501 = LINE('',#155502,#155503); +#155502 = CARTESIAN_POINT('',(132.148479,-108.421697,1.585)); +#155503 = VECTOR('',#155504,1.); +#155504 = DIRECTION('',(-0.894430510812,0.447206955813,0.)); +#155505 = ORIENTED_EDGE('',*,*,#155506,.T.); +#155506 = EDGE_CURVE('',#155499,#155507,#155509,.T.); +#155507 = VERTEX_POINT('',#155508); +#155508 = CARTESIAN_POINT('',(131.788692,-108.365412,1.585)); +#155509 = LINE('',#155510,#155511); +#155510 = CARTESIAN_POINT('',(132.040711,-108.367814,1.585)); +#155511 = VECTOR('',#155512,1.); +#155512 = DIRECTION('',(-0.999954582852,9.530594550415E-03,0.)); +#155513 = ORIENTED_EDGE('',*,*,#155514,.T.); +#155514 = EDGE_CURVE('',#155507,#155515,#155517,.T.); +#155515 = VERTEX_POINT('',#155516); +#155516 = CARTESIAN_POINT('',(131.757176,-108.354617,1.585)); +#155517 = LINE('',#155518,#155519); +#155518 = CARTESIAN_POINT('',(131.788692,-108.365412,1.585)); +#155519 = VECTOR('',#155520,1.); +#155520 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#155521 = ORIENTED_EDGE('',*,*,#155522,.T.); +#155522 = EDGE_CURVE('',#155515,#155523,#155525,.T.); +#155523 = VERTEX_POINT('',#155524); +#155524 = CARTESIAN_POINT('',(131.56501,-108.255849,1.585)); +#155525 = LINE('',#155526,#155527); +#155526 = CARTESIAN_POINT('',(131.757176,-108.354617,1.585)); +#155527 = VECTOR('',#155528,1.); +#155528 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#155529 = ORIENTED_EDGE('',*,*,#155530,.T.); +#155530 = EDGE_CURVE('',#155523,#155531,#155533,.T.); +#155531 = VERTEX_POINT('',#155532); +#155532 = CARTESIAN_POINT('',(131.532412,-108.21708,1.585)); +#155533 = LINE('',#155534,#155535); +#155534 = CARTESIAN_POINT('',(131.56501,-108.255849,1.585)); +#155535 = VECTOR('',#155536,1.); +#155536 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#155537 = ORIENTED_EDGE('',*,*,#155538,.T.); +#155538 = EDGE_CURVE('',#155531,#155539,#155541,.T.); +#155539 = VERTEX_POINT('',#155540); +#155540 = CARTESIAN_POINT('',(131.435374,-108.018687,1.585)); +#155541 = LINE('',#155542,#155543); +#155542 = CARTESIAN_POINT('',(131.532412,-108.21708,1.585)); +#155543 = VECTOR('',#155544,1.); +#155544 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#155545 = ORIENTED_EDGE('',*,*,#155546,.T.); +#155546 = EDGE_CURVE('',#155539,#155547,#155549,.T.); +#155547 = VERTEX_POINT('',#155548); +#155548 = CARTESIAN_POINT('',(131.430935,-107.985671,1.585)); +#155549 = LINE('',#155550,#155551); +#155550 = CARTESIAN_POINT('',(131.435374,-108.018687,1.585)); +#155551 = VECTOR('',#155552,1.); +#155552 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#155553 = ORIENTED_EDGE('',*,*,#155554,.T.); +#155554 = EDGE_CURVE('',#155547,#155555,#155557,.T.); +#155555 = VERTEX_POINT('',#155556); +#155556 = CARTESIAN_POINT('',(131.433337,-107.875571,1.585)); +#155557 = LINE('',#155558,#155559); +#155558 = CARTESIAN_POINT('',(131.430935,-107.985671,1.585)); +#155559 = VECTOR('',#155560,1.); +#155560 = DIRECTION('',(2.181134037059E-02,0.999762104418,0.)); +#155561 = ORIENTED_EDGE('',*,*,#155562,.T.); +#155562 = EDGE_CURVE('',#155555,#155563,#155565,.T.); +#155563 = VERTEX_POINT('',#155564); +#155564 = CARTESIAN_POINT('',(131.444131,-107.844056,1.585)); +#155565 = LINE('',#155566,#155567); +#155566 = CARTESIAN_POINT('',(131.433337,-107.875571,1.585)); +#155567 = VECTOR('',#155568,1.); +#155568 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#155569 = ORIENTED_EDGE('',*,*,#155570,.T.); +#155570 = EDGE_CURVE('',#155563,#155571,#155573,.T.); +#155571 = VERTEX_POINT('',#155572); +#155572 = CARTESIAN_POINT('',(131.542899,-107.651889,1.585)); +#155573 = LINE('',#155574,#155575); +#155574 = CARTESIAN_POINT('',(131.444131,-107.844056,1.585)); +#155575 = VECTOR('',#155576,1.); +#155576 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#155577 = ORIENTED_EDGE('',*,*,#155578,.T.); +#155578 = EDGE_CURVE('',#155571,#155245,#155579,.T.); +#155579 = LINE('',#155580,#155581); +#155580 = CARTESIAN_POINT('',(131.542899,-107.651889,1.585)); +#155581 = VECTOR('',#155582,1.); +#155582 = DIRECTION('',(0.765399877272,0.643554992112,0.)); +#155583 = PLANE('',#155584); +#155584 = AXIS2_PLACEMENT_3D('',#155585,#155586,#155587); +#155585 = CARTESIAN_POINT('',(0.,0.,1.585)); +#155586 = DIRECTION('',(0.,0.,1.)); +#155587 = DIRECTION('',(1.,0.,-0.)); +#155588 = SHELL_BASED_SURFACE_MODEL('',(#155589)); +#155589 = OPEN_SHELL('',(#155590)); +#155590 = ADVANCED_FACE('',(#155591,#155827),#155878,.T.); +#155591 = FACE_BOUND('',#155592,.F.); +#155592 = EDGE_LOOP('',(#155593,#155603,#155611,#155619,#155627,#155635, + #155643,#155651,#155659,#155667,#155676,#155684,#155692,#155700, + #155708,#155716,#155724,#155733,#155741,#155749,#155757,#155765, + #155773,#155781,#155789,#155797,#155805,#155813,#155821)); +#155593 = ORIENTED_EDGE('',*,*,#155594,.T.); +#155594 = EDGE_CURVE('',#155595,#155597,#155599,.T.); +#155595 = VERTEX_POINT('',#155596); +#155596 = CARTESIAN_POINT('',(138.867384,-107.61929,1.585)); +#155597 = VERTEX_POINT('',#155598); +#155598 = CARTESIAN_POINT('',(139.065776,-107.522253,1.585)); +#155599 = LINE('',#155600,#155601); +#155600 = CARTESIAN_POINT('',(138.867384,-107.61929,1.585)); +#155601 = VECTOR('',#155602,1.); +#155602 = DIRECTION('',(0.898303312265,0.439375874593,0.)); +#155603 = ORIENTED_EDGE('',*,*,#155604,.T.); +#155604 = EDGE_CURVE('',#155597,#155605,#155607,.T.); +#155605 = VERTEX_POINT('',#155606); +#155606 = CARTESIAN_POINT('',(139.098792,-107.517814,1.585)); +#155607 = LINE('',#155608,#155609); +#155608 = CARTESIAN_POINT('',(139.065776,-107.522253,1.585)); +#155609 = VECTOR('',#155610,1.); +#155610 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#155611 = ORIENTED_EDGE('',*,*,#155612,.T.); +#155612 = EDGE_CURVE('',#155605,#155613,#155615,.T.); +#155613 = VERTEX_POINT('',#155614); +#155614 = CARTESIAN_POINT('',(139.466035,-107.520216,1.585)); +#155615 = LINE('',#155616,#155617); +#155616 = CARTESIAN_POINT('',(139.098792,-107.517814,1.585)); +#155617 = VECTOR('',#155618,1.); +#155618 = DIRECTION('',(0.999978610776,-6.540488513295E-03,0.)); +#155619 = ORIENTED_EDGE('',*,*,#155620,.T.); +#155620 = EDGE_CURVE('',#155613,#155621,#155623,.T.); +#155621 = VERTEX_POINT('',#155622); +#155622 = CARTESIAN_POINT('',(139.497551,-107.531011,1.585)); +#155623 = LINE('',#155624,#155625); +#155624 = CARTESIAN_POINT('',(139.466035,-107.520216,1.585)); +#155625 = VECTOR('',#155626,1.); +#155626 = DIRECTION('',(0.946042469829,-0.324042659659,0.)); +#155627 = ORIENTED_EDGE('',*,*,#155628,.T.); +#155628 = EDGE_CURVE('',#155621,#155629,#155631,.T.); +#155629 = VERTEX_POINT('',#155630); +#155630 = CARTESIAN_POINT('',(139.689716,-107.629779,1.585)); +#155631 = LINE('',#155632,#155633); +#155632 = CARTESIAN_POINT('',(139.497551,-107.531011,1.585)); +#155633 = VECTOR('',#155634,1.); +#155634 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#155635 = ORIENTED_EDGE('',*,*,#155636,.T.); +#155636 = EDGE_CURVE('',#155629,#155637,#155639,.T.); +#155637 = VERTEX_POINT('',#155638); +#155638 = CARTESIAN_POINT('',(139.722313,-107.668549,1.585)); +#155639 = LINE('',#155640,#155641); +#155640 = CARTESIAN_POINT('',(139.689716,-107.629779,1.585)); +#155641 = VECTOR('',#155642,1.); +#155642 = DIRECTION('',(0.643541585038,-0.765411149858,0.)); +#155643 = ORIENTED_EDGE('',*,*,#155644,.T.); +#155644 = EDGE_CURVE('',#155637,#155645,#155647,.T.); +#155645 = VERTEX_POINT('',#155646); +#155646 = CARTESIAN_POINT('',(139.819353,-107.866941,1.585)); +#155647 = LINE('',#155648,#155649); +#155648 = CARTESIAN_POINT('',(139.722313,-107.668549,1.585)); +#155649 = VECTOR('',#155650,1.); +#155650 = DIRECTION('',(0.439386835897,-0.898297950816,0.)); +#155651 = ORIENTED_EDGE('',*,*,#155652,.T.); +#155652 = EDGE_CURVE('',#155645,#155653,#155655,.T.); +#155653 = VERTEX_POINT('',#155654); +#155654 = CARTESIAN_POINT('',(139.823792,-107.899957,1.585)); +#155655 = LINE('',#155656,#155657); +#155656 = CARTESIAN_POINT('',(139.819353,-107.866941,1.585)); +#155657 = VECTOR('',#155658,1.); +#155658 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#155659 = ORIENTED_EDGE('',*,*,#155660,.T.); +#155660 = EDGE_CURVE('',#155653,#155661,#155663,.T.); +#155661 = VERTEX_POINT('',#155662); +#155662 = CARTESIAN_POINT('',(139.82139,-108.095771,1.585)); +#155663 = LINE('',#155664,#155665); +#155664 = CARTESIAN_POINT('',(139.823792,-107.899957,1.585)); +#155665 = VECTOR('',#155666,1.); +#155666 = DIRECTION('',(-1.226582012691E-02,-0.999924771999,0.)); +#155667 = ORIENTED_EDGE('',*,*,#155668,.T.); +#155668 = EDGE_CURVE('',#155661,#155669,#155671,.T.); +#155669 = VERTEX_POINT('',#155670); +#155670 = CARTESIAN_POINT('',(139.723307,-108.193958,1.585)); +#155671 = CIRCLE('',#155672,0.124999730291); +#155672 = AXIS2_PLACEMENT_3D('',#155673,#155674,#155675); +#155673 = CARTESIAN_POINT('',(139.6987918965,-108.0713858079,1.585)); +#155674 = DIRECTION('',(0.,0.,-1.)); +#155675 = DIRECTION('',(0.980786944144,-0.195081957639,0.)); +#155676 = ORIENTED_EDGE('',*,*,#155677,.T.); +#155677 = EDGE_CURVE('',#155669,#155678,#155680,.T.); +#155678 = VERTEX_POINT('',#155679); +#155679 = CARTESIAN_POINT('',(138.966649,-108.345289,1.585)); +#155680 = LINE('',#155681,#155682); +#155681 = CARTESIAN_POINT('',(139.723307,-108.193958,1.585)); +#155682 = VECTOR('',#155683,1.); +#155683 = DIRECTION('',(-0.980580825222,-0.196115387482,0.)); +#155684 = ORIENTED_EDGE('',*,*,#155685,.T.); +#155685 = EDGE_CURVE('',#155678,#155686,#155688,.T.); +#155686 = VERTEX_POINT('',#155687); +#155687 = CARTESIAN_POINT('',(138.966649,-108.556162,1.585)); +#155688 = LINE('',#155689,#155690); +#155689 = CARTESIAN_POINT('',(138.966649,-108.345289,1.585)); +#155690 = VECTOR('',#155691,1.); +#155691 = DIRECTION('',(0.,-1.,0.)); +#155692 = ORIENTED_EDGE('',*,*,#155693,.T.); +#155693 = EDGE_CURVE('',#155686,#155694,#155696,.T.); +#155694 = VERTEX_POINT('',#155695); +#155695 = CARTESIAN_POINT('',(139.020532,-108.66393,1.585)); +#155696 = LINE('',#155697,#155698); +#155697 = CARTESIAN_POINT('',(138.966649,-108.556162,1.585)); +#155698 = VECTOR('',#155699,1.); +#155699 = DIRECTION('',(0.447206955814,-0.894430510812,0.)); +#155700 = ORIENTED_EDGE('',*,*,#155701,.T.); +#155701 = EDGE_CURVE('',#155694,#155702,#155704,.T.); +#155702 = VERTEX_POINT('',#155703); +#155703 = CARTESIAN_POINT('',(139.128301,-108.717814,1.585)); +#155704 = LINE('',#155705,#155706); +#155705 = CARTESIAN_POINT('',(139.020532,-108.66393,1.585)); +#155706 = VECTOR('',#155707,1.); +#155707 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#155708 = ORIENTED_EDGE('',*,*,#155709,.T.); +#155709 = EDGE_CURVE('',#155702,#155710,#155712,.T.); +#155710 = VERTEX_POINT('',#155711); +#155711 = CARTESIAN_POINT('',(139.412141,-108.717814,1.585)); +#155712 = LINE('',#155713,#155714); +#155713 = CARTESIAN_POINT('',(139.128301,-108.717814,1.585)); +#155714 = VECTOR('',#155715,1.); +#155715 = DIRECTION('',(1.,0.,0.)); +#155716 = ORIENTED_EDGE('',*,*,#155717,.T.); +#155717 = EDGE_CURVE('',#155710,#155718,#155720,.T.); +#155718 = VERTEX_POINT('',#155719); +#155719 = CARTESIAN_POINT('',(139.580061,-108.636539,1.585)); +#155720 = LINE('',#155721,#155722); +#155721 = CARTESIAN_POINT('',(139.412141,-108.717814,1.585)); +#155722 = VECTOR('',#155723,1.); +#155723 = DIRECTION('',(0.90011009407,0.435662505333,0.)); +#155724 = ORIENTED_EDGE('',*,*,#155725,.T.); +#155725 = EDGE_CURVE('',#155718,#155726,#155728,.T.); +#155726 = VERTEX_POINT('',#155727); +#155727 = CARTESIAN_POINT('',(139.689716,-108.855849,1.585)); +#155728 = CIRCLE('',#155729,0.124999889885); +#155729 = AXIS2_PLACEMENT_3D('',#155730,#155731,#155732); +#155730 = CARTESIAN_POINT('',(139.61307660067,-108.7570999496,1.585)); +#155731 = DIRECTION('',(0.,0.,-1.)); +#155732 = DIRECTION('',(-0.264125038109,0.964488446921,-0.)); +#155733 = ORIENTED_EDGE('',*,*,#155734,.T.); +#155734 = EDGE_CURVE('',#155726,#155735,#155737,.T.); +#155735 = VERTEX_POINT('',#155736); +#155736 = CARTESIAN_POINT('',(139.474665,-108.963375,1.585)); +#155737 = LINE('',#155738,#155739); +#155738 = CARTESIAN_POINT('',(139.689716,-108.855849,1.585)); +#155739 = VECTOR('',#155740,1.); +#155740 = DIRECTION('',(-0.894426359171,-0.447215259154,0.)); +#155741 = ORIENTED_EDGE('',*,*,#155742,.T.); +#155742 = EDGE_CURVE('',#155735,#155743,#155745,.T.); +#155743 = VERTEX_POINT('',#155744); +#155744 = CARTESIAN_POINT('',(139.441649,-108.967814,1.585)); +#155745 = LINE('',#155746,#155747); +#155746 = CARTESIAN_POINT('',(139.474665,-108.963375,1.585)); +#155747 = VECTOR('',#155748,1.); +#155748 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#155749 = ORIENTED_EDGE('',*,*,#155750,.T.); +#155750 = EDGE_CURVE('',#155743,#155751,#155753,.T.); +#155751 = VERTEX_POINT('',#155752); +#155752 = CARTESIAN_POINT('',(139.074406,-108.965412,1.585)); +#155753 = LINE('',#155754,#155755); +#155754 = CARTESIAN_POINT('',(139.441649,-108.967814,1.585)); +#155755 = VECTOR('',#155756,1.); +#155756 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#155757 = ORIENTED_EDGE('',*,*,#155758,.T.); +#155758 = EDGE_CURVE('',#155751,#155759,#155761,.T.); +#155759 = VERTEX_POINT('',#155760); +#155760 = CARTESIAN_POINT('',(139.04289,-108.954617,1.585)); +#155761 = LINE('',#155762,#155763); +#155762 = CARTESIAN_POINT('',(139.074406,-108.965412,1.585)); +#155763 = VECTOR('',#155764,1.); +#155764 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#155765 = ORIENTED_EDGE('',*,*,#155766,.T.); +#155766 = EDGE_CURVE('',#155759,#155767,#155769,.T.); +#155767 = VERTEX_POINT('',#155768); +#155768 = CARTESIAN_POINT('',(138.850724,-108.855849,1.585)); +#155769 = LINE('',#155770,#155771); +#155770 = CARTESIAN_POINT('',(139.04289,-108.954617,1.585)); +#155771 = VECTOR('',#155772,1.); +#155772 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#155773 = ORIENTED_EDGE('',*,*,#155774,.T.); +#155774 = EDGE_CURVE('',#155767,#155775,#155777,.T.); +#155775 = VERTEX_POINT('',#155776); +#155776 = CARTESIAN_POINT('',(138.818126,-108.81708,1.585)); +#155777 = LINE('',#155778,#155779); +#155778 = CARTESIAN_POINT('',(138.850724,-108.855849,1.585)); +#155779 = VECTOR('',#155780,1.); +#155780 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#155781 = ORIENTED_EDGE('',*,*,#155782,.T.); +#155782 = EDGE_CURVE('',#155775,#155783,#155785,.T.); +#155783 = VERTEX_POINT('',#155784); +#155784 = CARTESIAN_POINT('',(138.721088,-108.618687,1.585)); +#155785 = LINE('',#155786,#155787); +#155786 = CARTESIAN_POINT('',(138.818126,-108.81708,1.585)); +#155787 = VECTOR('',#155788,1.); +#155788 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#155789 = ORIENTED_EDGE('',*,*,#155790,.T.); +#155790 = EDGE_CURVE('',#155783,#155791,#155793,.T.); +#155791 = VERTEX_POINT('',#155792); +#155792 = CARTESIAN_POINT('',(138.716649,-108.585671,1.585)); +#155793 = LINE('',#155794,#155795); +#155794 = CARTESIAN_POINT('',(138.721088,-108.618687,1.585)); +#155795 = VECTOR('',#155796,1.); +#155796 = DIRECTION('',(-0.133250982623,0.991082325355,0.)); +#155797 = ORIENTED_EDGE('',*,*,#155798,.T.); +#155798 = EDGE_CURVE('',#155791,#155799,#155801,.T.); +#155799 = VERTEX_POINT('',#155800); +#155800 = CARTESIAN_POINT('',(138.719051,-107.875571,1.585)); +#155801 = LINE('',#155802,#155803); +#155802 = CARTESIAN_POINT('',(138.716649,-108.585671,1.585)); +#155803 = VECTOR('',#155804,1.); +#155804 = DIRECTION('',(3.382602813877E-03,0.999994278983,0.)); +#155805 = ORIENTED_EDGE('',*,*,#155806,.T.); +#155806 = EDGE_CURVE('',#155799,#155807,#155809,.T.); +#155807 = VERTEX_POINT('',#155808); +#155808 = CARTESIAN_POINT('',(138.729845,-107.844056,1.585)); +#155809 = LINE('',#155810,#155811); +#155810 = CARTESIAN_POINT('',(138.719051,-107.875571,1.585)); +#155811 = VECTOR('',#155812,1.); +#155812 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#155813 = ORIENTED_EDGE('',*,*,#155814,.T.); +#155814 = EDGE_CURVE('',#155807,#155815,#155817,.T.); +#155815 = VERTEX_POINT('',#155816); +#155816 = CARTESIAN_POINT('',(138.828613,-107.651889,1.585)); +#155817 = LINE('',#155818,#155819); +#155818 = CARTESIAN_POINT('',(138.729845,-107.844056,1.585)); +#155819 = VECTOR('',#155820,1.); +#155820 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#155821 = ORIENTED_EDGE('',*,*,#155822,.T.); +#155822 = EDGE_CURVE('',#155815,#155595,#155823,.T.); +#155823 = LINE('',#155824,#155825); +#155824 = CARTESIAN_POINT('',(138.828613,-107.651889,1.585)); +#155825 = VECTOR('',#155826,1.); +#155826 = DIRECTION('',(0.765399877272,0.643554992112,0.)); +#155827 = FACE_BOUND('',#155828,.F.); +#155828 = EDGE_LOOP('',(#155829,#155840,#155848,#155856,#155864,#155872) + ); +#155829 = ORIENTED_EDGE('',*,*,#155830,.T.); +#155830 = EDGE_CURVE('',#155831,#155833,#155835,.T.); +#155831 = VERTEX_POINT('',#155832); +#155832 = CARTESIAN_POINT('',(139.519907,-107.821697,1.585)); +#155833 = VERTEX_POINT('',#155834); +#155834 = CARTESIAN_POINT('',(139.020532,-107.821698,1.585)); +#155835 = CIRCLE('',#155836,0.441959003379); +#155836 = AXIS2_PLACEMENT_3D('',#155837,#155838,#155839); +#155837 = CARTESIAN_POINT('',(139.27022023025,-108.1863670943,1.585)); +#155838 = DIRECTION('',(0.,0.,1.)); +#155839 = DIRECTION('',(0.564954594972,0.825121994386,-0.)); +#155840 = ORIENTED_EDGE('',*,*,#155841,.T.); +#155841 = EDGE_CURVE('',#155833,#155842,#155844,.T.); +#155842 = VERTEX_POINT('',#155843); +#155843 = CARTESIAN_POINT('',(138.966649,-107.929465,1.585)); +#155844 = LINE('',#155845,#155846); +#155845 = CARTESIAN_POINT('',(139.020532,-107.821698,1.585)); +#155846 = VECTOR('',#155847,1.); +#155847 = DIRECTION('',(-0.447210275635,-0.894428850925,0.)); +#155848 = ORIENTED_EDGE('',*,*,#155849,.T.); +#155849 = EDGE_CURVE('',#155842,#155850,#155852,.T.); +#155850 = VERTEX_POINT('',#155851); +#155851 = CARTESIAN_POINT('',(138.966649,-108.090337,1.585)); +#155852 = LINE('',#155853,#155854); +#155853 = CARTESIAN_POINT('',(138.966649,-107.929465,1.585)); +#155854 = VECTOR('',#155855,1.); +#155855 = DIRECTION('',(0.,-1.,0.)); +#155856 = ORIENTED_EDGE('',*,*,#155857,.T.); +#155857 = EDGE_CURVE('',#155850,#155858,#155860,.T.); +#155858 = VERTEX_POINT('',#155859); +#155859 = CARTESIAN_POINT('',(139.573792,-107.968909,1.585)); +#155860 = LINE('',#155861,#155862); +#155861 = CARTESIAN_POINT('',(138.966649,-108.090337,1.585)); +#155862 = VECTOR('',#155863,1.); +#155863 = DIRECTION('',(0.980580862045,0.196115203365,0.)); +#155864 = ORIENTED_EDGE('',*,*,#155865,.T.); +#155865 = EDGE_CURVE('',#155858,#155866,#155868,.T.); +#155866 = VERTEX_POINT('',#155867); +#155867 = CARTESIAN_POINT('',(139.573792,-107.929465,1.585)); +#155868 = LINE('',#155869,#155870); +#155869 = CARTESIAN_POINT('',(139.573792,-107.968909,1.585)); +#155870 = VECTOR('',#155871,1.); +#155871 = DIRECTION('',(0.,1.,0.)); +#155872 = ORIENTED_EDGE('',*,*,#155873,.T.); +#155873 = EDGE_CURVE('',#155866,#155831,#155874,.T.); +#155874 = LINE('',#155875,#155876); +#155875 = CARTESIAN_POINT('',(139.573792,-107.929465,1.585)); +#155876 = VECTOR('',#155877,1.); +#155877 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#155878 = PLANE('',#155879); +#155879 = AXIS2_PLACEMENT_3D('',#155880,#155881,#155882); +#155880 = CARTESIAN_POINT('',(0.,0.,1.585)); +#155881 = DIRECTION('',(0.,0.,1.)); +#155882 = DIRECTION('',(1.,0.,-0.)); +#155883 = SHELL_BASED_SURFACE_MODEL('',(#155884)); +#155884 = OPEN_SHELL('',(#155885)); +#155885 = ADVANCED_FACE('',(#155886,#156082,#156149),#156201,.T.); +#155886 = FACE_BOUND('',#155887,.F.); +#155887 = EDGE_LOOP('',(#155888,#155899,#155907,#155915,#155923,#155931, + #155939,#155947,#155955,#155963,#155971,#155979,#155987,#155995, + #156003,#156011,#156019,#156027,#156035,#156043,#156051,#156059, + #156067,#156076)); +#155888 = ORIENTED_EDGE('',*,*,#155889,.T.); +#155889 = EDGE_CURVE('',#155890,#155892,#155894,.T.); +#155890 = VERTEX_POINT('',#155891); +#155891 = CARTESIAN_POINT('',(147.033337,-107.018428,1.585)); +#155892 = VERTEX_POINT('',#155893); +#155893 = CARTESIAN_POINT('',(147.131549,-106.920216,1.585)); +#155894 = CIRCLE('',#155895,0.124998078635); +#155895 = AXIS2_PLACEMENT_3D('',#155896,#155897,#155898); +#155896 = CARTESIAN_POINT('',(147.15593354765,-107.0428125476,1.585)); +#155897 = DIRECTION('',(0.,0.,-1.)); +#155898 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#155899 = ORIENTED_EDGE('',*,*,#155900,.T.); +#155900 = EDGE_CURVE('',#155892,#155901,#155903,.T.); +#155901 = VERTEX_POINT('',#155902); +#155902 = CARTESIAN_POINT('',(147.780321,-106.920216,1.585)); +#155903 = LINE('',#155904,#155905); +#155904 = CARTESIAN_POINT('',(147.131549,-106.920216,1.585)); +#155905 = VECTOR('',#155906,1.); +#155906 = DIRECTION('',(1.,0.,0.)); +#155907 = ORIENTED_EDGE('',*,*,#155908,.T.); +#155908 = EDGE_CURVE('',#155901,#155909,#155911,.T.); +#155909 = VERTEX_POINT('',#155910); +#155910 = CARTESIAN_POINT('',(147.811836,-106.93101,1.585)); +#155911 = LINE('',#155912,#155913); +#155912 = CARTESIAN_POINT('',(147.780321,-106.920216,1.585)); +#155913 = VECTOR('',#155914,1.); +#155914 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#155915 = ORIENTED_EDGE('',*,*,#155916,.T.); +#155916 = EDGE_CURVE('',#155909,#155917,#155919,.T.); +#155917 = VERTEX_POINT('',#155918); +#155918 = CARTESIAN_POINT('',(148.004003,-107.029778,1.585)); +#155919 = LINE('',#155920,#155921); +#155920 = CARTESIAN_POINT('',(147.811836,-106.93101,1.585)); +#155921 = VECTOR('',#155922,1.); +#155922 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#155923 = ORIENTED_EDGE('',*,*,#155924,.T.); +#155924 = EDGE_CURVE('',#155917,#155925,#155927,.T.); +#155925 = VERTEX_POINT('',#155926); +#155926 = CARTESIAN_POINT('',(148.117011,-107.144796,1.585)); +#155927 = LINE('',#155928,#155929); +#155928 = CARTESIAN_POINT('',(148.004003,-107.029778,1.585)); +#155929 = VECTOR('',#155930,1.); +#155930 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#155931 = ORIENTED_EDGE('',*,*,#155932,.T.); +#155932 = EDGE_CURVE('',#155925,#155933,#155935,.T.); +#155933 = VERTEX_POINT('',#155934); +#155934 = CARTESIAN_POINT('',(148.219353,-107.352655,1.585)); +#155935 = LINE('',#155936,#155937); +#155936 = CARTESIAN_POINT('',(148.117011,-107.144796,1.585)); +#155937 = VECTOR('',#155938,1.); +#155938 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#155939 = ORIENTED_EDGE('',*,*,#155940,.T.); +#155940 = EDGE_CURVE('',#155933,#155941,#155943,.T.); +#155941 = VERTEX_POINT('',#155942); +#155942 = CARTESIAN_POINT('',(148.223792,-107.385671,1.585)); +#155943 = LINE('',#155944,#155945); +#155944 = CARTESIAN_POINT('',(148.219353,-107.352655,1.585)); +#155945 = VECTOR('',#155946,1.); +#155946 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#155947 = ORIENTED_EDGE('',*,*,#155948,.T.); +#155948 = EDGE_CURVE('',#155941,#155949,#155951,.T.); +#155949 = VERTEX_POINT('',#155950); +#155950 = CARTESIAN_POINT('',(148.22139,-107.581486,1.585)); +#155951 = LINE('',#155952,#155953); +#155952 = CARTESIAN_POINT('',(148.223792,-107.385671,1.585)); +#155953 = VECTOR('',#155954,1.); +#155954 = DIRECTION('',(-1.226575749649E-02,-0.999924772767,0.)); +#155955 = ORIENTED_EDGE('',*,*,#155956,.T.); +#155956 = EDGE_CURVE('',#155949,#155957,#155959,.T.); +#155957 = VERTEX_POINT('',#155958); +#155958 = CARTESIAN_POINT('',(148.210595,-107.613002,1.585)); +#155959 = LINE('',#155960,#155961); +#155960 = CARTESIAN_POINT('',(148.22139,-107.581486,1.585)); +#155961 = VECTOR('',#155962,1.); +#155962 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#155963 = ORIENTED_EDGE('',*,*,#155964,.T.); +#155964 = EDGE_CURVE('',#155957,#155965,#155967,.T.); +#155965 = VERTEX_POINT('',#155966); +#155966 = CARTESIAN_POINT('',(148.111827,-107.805167,1.585)); +#155967 = LINE('',#155968,#155969); +#155968 = CARTESIAN_POINT('',(148.210595,-107.613002,1.585)); +#155969 = VECTOR('',#155970,1.); +#155970 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#155971 = ORIENTED_EDGE('',*,*,#155972,.T.); +#155972 = EDGE_CURVE('',#155965,#155973,#155975,.T.); +#155973 = VERTEX_POINT('',#155974); +#155974 = CARTESIAN_POINT('',(148.052606,-107.867085,1.585)); +#155975 = LINE('',#155976,#155977); +#155976 = CARTESIAN_POINT('',(148.111827,-107.805167,1.585)); +#155977 = VECTOR('',#155978,1.); +#155978 = DIRECTION('',(-0.691192700655,-0.722670499302,0.)); +#155979 = ORIENTED_EDGE('',*,*,#155980,.T.); +#155980 = EDGE_CURVE('',#155973,#155981,#155983,.T.); +#155981 = VERTEX_POINT('',#155982); +#155982 = CARTESIAN_POINT('',(148.082524,-107.881738,1.585)); +#155983 = LINE('',#155984,#155985); +#155984 = CARTESIAN_POINT('',(148.052606,-107.867085,1.585)); +#155985 = VECTOR('',#155986,1.); +#155986 = DIRECTION('',(0.898071177728,-0.439850156001,0.)); +#155987 = ORIENTED_EDGE('',*,*,#155988,.T.); +#155988 = EDGE_CURVE('',#155981,#155989,#155991,.T.); +#155989 = VERTEX_POINT('',#155990); +#155990 = CARTESIAN_POINT('',(148.202725,-108.001939,1.585)); +#155991 = LINE('',#155992,#155993); +#155992 = CARTESIAN_POINT('',(148.082524,-107.881738,1.585)); +#155993 = VECTOR('',#155994,1.); +#155994 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#155995 = ORIENTED_EDGE('',*,*,#155996,.T.); +#155996 = EDGE_CURVE('',#155989,#155997,#155999,.T.); +#155997 = VERTEX_POINT('',#155998); +#155998 = CARTESIAN_POINT('',(148.305067,-108.209798,1.585)); +#155999 = LINE('',#156000,#156001); +#156000 = CARTESIAN_POINT('',(148.202725,-108.001939,1.585)); +#156001 = VECTOR('',#156002,1.); +#156002 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#156003 = ORIENTED_EDGE('',*,*,#156004,.T.); +#156004 = EDGE_CURVE('',#155997,#156005,#156007,.T.); +#156005 = VERTEX_POINT('',#156006); +#156006 = CARTESIAN_POINT('',(148.309506,-108.242814,1.585)); +#156007 = LINE('',#156008,#156009); +#156008 = CARTESIAN_POINT('',(148.305067,-108.209798,1.585)); +#156009 = VECTOR('',#156010,1.); +#156010 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#156011 = ORIENTED_EDGE('',*,*,#156012,.T.); +#156012 = EDGE_CURVE('',#156005,#156013,#156015,.T.); +#156013 = VERTEX_POINT('',#156014); +#156014 = CARTESIAN_POINT('',(148.307104,-108.524343,1.585)); +#156015 = LINE('',#156016,#156017); +#156016 = CARTESIAN_POINT('',(148.309506,-108.242814,1.585)); +#156017 = VECTOR('',#156018,1.); +#156018 = DIRECTION('',(-8.531670195019E-03,-0.99996360464,0.)); +#156019 = ORIENTED_EDGE('',*,*,#156020,.T.); +#156020 = EDGE_CURVE('',#156013,#156021,#156023,.T.); +#156021 = VERTEX_POINT('',#156022); +#156022 = CARTESIAN_POINT('',(148.296309,-108.555859,1.585)); +#156023 = LINE('',#156024,#156025); +#156024 = CARTESIAN_POINT('',(148.307104,-108.524343,1.585)); +#156025 = VECTOR('',#156026,1.); +#156026 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#156027 = ORIENTED_EDGE('',*,*,#156028,.T.); +#156028 = EDGE_CURVE('',#156021,#156029,#156031,.T.); +#156029 = VERTEX_POINT('',#156030); +#156030 = CARTESIAN_POINT('',(148.197541,-108.748024,1.585)); +#156031 = LINE('',#156032,#156033); +#156032 = CARTESIAN_POINT('',(148.296309,-108.555859,1.585)); +#156033 = VECTOR('',#156034,1.); +#156034 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#156035 = ORIENTED_EDGE('',*,*,#156036,.T.); +#156036 = EDGE_CURVE('',#156029,#156037,#156039,.T.); +#156037 = VERTEX_POINT('',#156038); +#156038 = CARTESIAN_POINT('',(148.082525,-108.861033,1.585)); +#156039 = LINE('',#156040,#156041); +#156040 = CARTESIAN_POINT('',(148.197541,-108.748024,1.585)); +#156041 = VECTOR('',#156042,1.); +#156042 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#156043 = ORIENTED_EDGE('',*,*,#156044,.T.); +#156044 = EDGE_CURVE('',#156037,#156045,#156047,.T.); +#156045 = VERTEX_POINT('',#156046); +#156046 = CARTESIAN_POINT('',(147.874665,-108.963375,1.585)); +#156047 = LINE('',#156048,#156049); +#156048 = CARTESIAN_POINT('',(148.082525,-108.861033,1.585)); +#156049 = VECTOR('',#156050,1.); +#156050 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#156051 = ORIENTED_EDGE('',*,*,#156052,.T.); +#156052 = EDGE_CURVE('',#156045,#156053,#156055,.T.); +#156053 = VERTEX_POINT('',#156054); +#156054 = CARTESIAN_POINT('',(147.841649,-108.967814,1.585)); +#156055 = LINE('',#156056,#156057); +#156056 = CARTESIAN_POINT('',(147.874665,-108.963375,1.585)); +#156057 = VECTOR('',#156058,1.); +#156058 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#156059 = ORIENTED_EDGE('',*,*,#156060,.T.); +#156060 = EDGE_CURVE('',#156053,#156061,#156063,.T.); +#156061 = VERTEX_POINT('',#156062); +#156062 = CARTESIAN_POINT('',(147.131549,-108.965412,1.585)); +#156063 = LINE('',#156064,#156065); +#156064 = CARTESIAN_POINT('',(147.841649,-108.967814,1.585)); +#156065 = VECTOR('',#156066,1.); +#156066 = DIRECTION('',(-0.999994278983,3.382602813857E-03,0.)); +#156067 = ORIENTED_EDGE('',*,*,#156068,.T.); +#156068 = EDGE_CURVE('',#156061,#156069,#156071,.T.); +#156069 = VERTEX_POINT('',#156070); +#156070 = CARTESIAN_POINT('',(147.033337,-108.8672,1.585)); +#156071 = CIRCLE('',#156072,0.124998078635); +#156072 = AXIS2_PLACEMENT_3D('',#156073,#156074,#156075); +#156073 = CARTESIAN_POINT('',(147.15593354765,-108.8428154523,1.585)); +#156074 = DIRECTION('',(0.,0.,-1.)); +#156075 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#156076 = ORIENTED_EDGE('',*,*,#156077,.T.); +#156077 = EDGE_CURVE('',#156069,#155890,#156078,.T.); +#156078 = LINE('',#156079,#156080); +#156079 = CARTESIAN_POINT('',(147.033337,-108.8672,1.585)); +#156080 = VECTOR('',#156081,1.); +#156081 = DIRECTION('',(0.,1.,0.)); +#156082 = FACE_BOUND('',#156083,.F.); +#156083 = EDGE_LOOP('',(#156084,#156094,#156102,#156110,#156118,#156127, + #156135,#156143)); +#156084 = ORIENTED_EDGE('',*,*,#156085,.T.); +#156085 = EDGE_CURVE('',#156086,#156088,#156090,.T.); +#156086 = VERTEX_POINT('',#156087); +#156087 = CARTESIAN_POINT('',(147.945556,-108.094925,1.585)); +#156088 = VERTEX_POINT('',#156089); +#156089 = CARTESIAN_POINT('',(147.735652,-108.024957,1.585)); +#156090 = LINE('',#156091,#156092); +#156091 = CARTESIAN_POINT('',(147.945556,-108.094925,1.585)); +#156092 = VECTOR('',#156093,1.); +#156093 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#156094 = ORIENTED_EDGE('',*,*,#156095,.T.); +#156095 = EDGE_CURVE('',#156088,#156096,#156098,.T.); +#156096 = VERTEX_POINT('',#156097); +#156097 = CARTESIAN_POINT('',(147.280935,-108.024957,1.585)); +#156098 = LINE('',#156099,#156100); +#156099 = CARTESIAN_POINT('',(147.735652,-108.024957,1.585)); +#156100 = VECTOR('',#156101,1.); +#156101 = DIRECTION('',(-1.,0.,0.)); +#156102 = ORIENTED_EDGE('',*,*,#156103,.T.); +#156103 = EDGE_CURVE('',#156096,#156104,#156106,.T.); +#156104 = VERTEX_POINT('',#156105); +#156105 = CARTESIAN_POINT('',(147.280935,-108.717814,1.585)); +#156106 = LINE('',#156107,#156108); +#156107 = CARTESIAN_POINT('',(147.280935,-108.024957,1.585)); +#156108 = VECTOR('',#156109,1.); +#156109 = DIRECTION('',(0.,-1.,0.)); +#156110 = ORIENTED_EDGE('',*,*,#156111,.T.); +#156111 = EDGE_CURVE('',#156104,#156112,#156114,.T.); +#156112 = VERTEX_POINT('',#156113); +#156113 = CARTESIAN_POINT('',(147.81214,-108.717814,1.585)); +#156114 = LINE('',#156115,#156116); +#156115 = CARTESIAN_POINT('',(147.280935,-108.717814,1.585)); +#156116 = VECTOR('',#156117,1.); +#156117 = DIRECTION('',(1.,0.,0.)); +#156118 = ORIENTED_EDGE('',*,*,#156119,.T.); +#156119 = EDGE_CURVE('',#156112,#156120,#156122,.T.); +#156120 = VERTEX_POINT('',#156121); +#156121 = CARTESIAN_POINT('',(148.059506,-108.470448,1.585)); +#156122 = CIRCLE('',#156123,0.347641001424); +#156123 = AXIS2_PLACEMENT_3D('',#156124,#156125,#156126); +#156124 = CARTESIAN_POINT('',(147.72338560111,-108.3816936011,1.585)); +#156125 = DIRECTION('',(0.,0.,1.)); +#156126 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#156127 = ORIENTED_EDGE('',*,*,#156128,.T.); +#156128 = EDGE_CURVE('',#156120,#156129,#156131,.T.); +#156129 = VERTEX_POINT('',#156130); +#156130 = CARTESIAN_POINT('',(148.059506,-108.272322,1.585)); +#156131 = LINE('',#156132,#156133); +#156132 = CARTESIAN_POINT('',(148.059506,-108.470448,1.585)); +#156133 = VECTOR('',#156134,1.); +#156134 = DIRECTION('',(0.,1.,0.)); +#156135 = ORIENTED_EDGE('',*,*,#156136,.T.); +#156136 = EDGE_CURVE('',#156129,#156137,#156139,.T.); +#156137 = VERTEX_POINT('',#156138); +#156138 = CARTESIAN_POINT('',(147.996058,-108.145427,1.585)); +#156139 = LINE('',#156140,#156141); +#156140 = CARTESIAN_POINT('',(148.059506,-108.272322,1.585)); +#156141 = VECTOR('',#156142,1.); +#156142 = DIRECTION('',(-0.447216414918,0.894425781285,0.)); +#156143 = ORIENTED_EDGE('',*,*,#156144,.T.); +#156144 = EDGE_CURVE('',#156137,#156086,#156145,.T.); +#156145 = LINE('',#156146,#156147); +#156146 = CARTESIAN_POINT('',(147.996058,-108.145427,1.585)); +#156147 = VECTOR('',#156148,1.); +#156148 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#156149 = FACE_BOUND('',#156150,.F.); +#156150 = EDGE_LOOP('',(#156151,#156162,#156170,#156178,#156186,#156195) + ); +#156151 = ORIENTED_EDGE('',*,*,#156152,.T.); +#156152 = EDGE_CURVE('',#156153,#156155,#156157,.T.); +#156153 = VERTEX_POINT('',#156154); +#156154 = CARTESIAN_POINT('',(147.973792,-107.415179,1.585)); +#156155 = VERTEX_POINT('',#156156); +#156156 = CARTESIAN_POINT('',(147.726426,-107.167814,1.585)); +#156157 = CIRCLE('',#156158,0.347631916063); +#156158 = AXIS2_PLACEMENT_3D('',#156159,#156160,#156161); +#156159 = CARTESIAN_POINT('',(147.63767931879,-107.5039270399,1.585)); +#156160 = DIRECTION('',(0.,0.,1.)); +#156161 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#156162 = ORIENTED_EDGE('',*,*,#156163,.T.); +#156163 = EDGE_CURVE('',#156155,#156164,#156166,.T.); +#156164 = VERTEX_POINT('',#156165); +#156165 = CARTESIAN_POINT('',(147.280935,-107.167814,1.585)); +#156166 = LINE('',#156167,#156168); +#156167 = CARTESIAN_POINT('',(147.726426,-107.167814,1.585)); +#156168 = VECTOR('',#156169,1.); +#156169 = DIRECTION('',(-1.,0.,0.)); +#156170 = ORIENTED_EDGE('',*,*,#156171,.T.); +#156171 = EDGE_CURVE('',#156164,#156172,#156174,.T.); +#156172 = VERTEX_POINT('',#156173); +#156173 = CARTESIAN_POINT('',(147.280935,-107.774957,1.585)); +#156174 = LINE('',#156175,#156176); +#156175 = CARTESIAN_POINT('',(147.280935,-107.167814,1.585)); +#156176 = VECTOR('',#156177,1.); +#156177 = DIRECTION('',(0.,-1.,0.)); +#156178 = ORIENTED_EDGE('',*,*,#156179,.T.); +#156179 = EDGE_CURVE('',#156172,#156180,#156182,.T.); +#156180 = VERTEX_POINT('',#156181); +#156181 = CARTESIAN_POINT('',(147.726427,-107.774957,1.585)); +#156182 = LINE('',#156183,#156184); +#156183 = CARTESIAN_POINT('',(147.280935,-107.774957,1.585)); +#156184 = VECTOR('',#156185,1.); +#156185 = DIRECTION('',(1.,0.,0.)); +#156186 = ORIENTED_EDGE('',*,*,#156187,.T.); +#156187 = EDGE_CURVE('',#156180,#156188,#156190,.T.); +#156188 = VERTEX_POINT('',#156189); +#156189 = CARTESIAN_POINT('',(147.973792,-107.527591,1.585)); +#156190 = CIRCLE('',#156191,0.347639125489); +#156191 = AXIS2_PLACEMENT_3D('',#156192,#156193,#156194); +#156192 = CARTESIAN_POINT('',(147.63767306109,-107.4388384198,1.585)); +#156193 = DIRECTION('',(0.,0.,1.)); +#156194 = DIRECTION('',(0.255304804327,-0.966860619163,0.)); +#156195 = ORIENTED_EDGE('',*,*,#156196,.T.); +#156196 = EDGE_CURVE('',#156188,#156153,#156197,.T.); +#156197 = LINE('',#156198,#156199); +#156198 = CARTESIAN_POINT('',(147.973792,-107.527591,1.585)); +#156199 = VECTOR('',#156200,1.); +#156200 = DIRECTION('',(0.,1.,0.)); +#156201 = PLANE('',#156202); +#156202 = AXIS2_PLACEMENT_3D('',#156203,#156204,#156205); +#156203 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156204 = DIRECTION('',(0.,0.,1.)); +#156205 = DIRECTION('',(1.,0.,-0.)); +#156206 = SHELL_BASED_SURFACE_MODEL('',(#156207)); +#156207 = OPEN_SHELL('',(#156208)); +#156208 = ADVANCED_FACE('',(#156209,#156403),#156473,.T.); +#156209 = FACE_BOUND('',#156210,.F.); +#156210 = EDGE_LOOP('',(#156211,#156221,#156229,#156237,#156245,#156253, + #156261,#156269,#156277,#156285,#156293,#156301,#156309,#156317, + #156325,#156333,#156341,#156349,#156357,#156365,#156373,#156381, + #156389,#156397)); +#156211 = ORIENTED_EDGE('',*,*,#156212,.T.); +#156212 = EDGE_CURVE('',#156213,#156215,#156217,.T.); +#156213 = VERTEX_POINT('',#156214); +#156214 = CARTESIAN_POINT('',(153.257918,-107.624595,1.585)); +#156215 = VERTEX_POINT('',#156216); +#156216 = CARTESIAN_POINT('',(153.465777,-107.522253,1.585)); +#156217 = LINE('',#156218,#156219); +#156218 = CARTESIAN_POINT('',(153.257918,-107.624595,1.585)); +#156219 = VECTOR('',#156220,1.); +#156220 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#156221 = ORIENTED_EDGE('',*,*,#156222,.T.); +#156222 = EDGE_CURVE('',#156215,#156223,#156225,.T.); +#156223 = VERTEX_POINT('',#156224); +#156224 = CARTESIAN_POINT('',(153.498793,-107.517814,1.585)); +#156225 = LINE('',#156226,#156227); +#156226 = CARTESIAN_POINT('',(153.465777,-107.522253,1.585)); +#156227 = VECTOR('',#156228,1.); +#156228 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#156229 = ORIENTED_EDGE('',*,*,#156230,.T.); +#156230 = EDGE_CURVE('',#156223,#156231,#156233,.T.); +#156231 = VERTEX_POINT('',#156232); +#156232 = CARTESIAN_POINT('',(153.780322,-107.520216,1.585)); +#156233 = LINE('',#156234,#156235); +#156234 = CARTESIAN_POINT('',(153.498793,-107.517814,1.585)); +#156235 = VECTOR('',#156236,1.); +#156236 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#156237 = ORIENTED_EDGE('',*,*,#156238,.T.); +#156238 = EDGE_CURVE('',#156231,#156239,#156241,.T.); +#156239 = VERTEX_POINT('',#156240); +#156240 = CARTESIAN_POINT('',(153.811838,-107.531011,1.585)); +#156241 = LINE('',#156242,#156243); +#156242 = CARTESIAN_POINT('',(153.780322,-107.520216,1.585)); +#156243 = VECTOR('',#156244,1.); +#156244 = DIRECTION('',(0.946042469829,-0.324042659659,0.)); +#156245 = ORIENTED_EDGE('',*,*,#156246,.T.); +#156246 = EDGE_CURVE('',#156239,#156247,#156249,.T.); +#156247 = VERTEX_POINT('',#156248); +#156248 = CARTESIAN_POINT('',(154.004003,-107.629779,1.585)); +#156249 = LINE('',#156250,#156251); +#156250 = CARTESIAN_POINT('',(153.811838,-107.531011,1.585)); +#156251 = VECTOR('',#156252,1.); +#156252 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#156253 = ORIENTED_EDGE('',*,*,#156254,.T.); +#156254 = EDGE_CURVE('',#156247,#156255,#156257,.T.); +#156255 = VERTEX_POINT('',#156256); +#156256 = CARTESIAN_POINT('',(154.117012,-107.744795,1.585)); +#156257 = LINE('',#156258,#156259); +#156258 = CARTESIAN_POINT('',(154.004003,-107.629779,1.585)); +#156259 = VECTOR('',#156260,1.); +#156260 = DIRECTION('',(0.700855916236,-0.713302870229,0.)); +#156261 = ORIENTED_EDGE('',*,*,#156262,.T.); +#156262 = EDGE_CURVE('',#156255,#156263,#156265,.T.); +#156263 = VERTEX_POINT('',#156264); +#156264 = CARTESIAN_POINT('',(154.219354,-107.952655,1.585)); +#156265 = LINE('',#156266,#156267); +#156266 = CARTESIAN_POINT('',(154.117012,-107.744795,1.585)); +#156267 = VECTOR('',#156268,1.); +#156268 = DIRECTION('',(0.44172197285,-0.897151993088,0.)); +#156269 = ORIENTED_EDGE('',*,*,#156270,.T.); +#156270 = EDGE_CURVE('',#156263,#156271,#156273,.T.); +#156271 = VERTEX_POINT('',#156272); +#156272 = CARTESIAN_POINT('',(154.223793,-107.985671,1.585)); +#156273 = LINE('',#156274,#156275); +#156274 = CARTESIAN_POINT('',(154.219354,-107.952655,1.585)); +#156275 = VECTOR('',#156276,1.); +#156276 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#156277 = ORIENTED_EDGE('',*,*,#156278,.T.); +#156278 = EDGE_CURVE('',#156271,#156279,#156281,.T.); +#156279 = VERTEX_POINT('',#156280); +#156280 = CARTESIAN_POINT('',(154.221391,-108.524343,1.585)); +#156281 = LINE('',#156282,#156283); +#156282 = CARTESIAN_POINT('',(154.223793,-107.985671,1.585)); +#156283 = VECTOR('',#156284,1.); +#156284 = DIRECTION('',(-4.459069934991E-03,-0.999990058298,0.)); +#156285 = ORIENTED_EDGE('',*,*,#156286,.T.); +#156286 = EDGE_CURVE('',#156279,#156287,#156289,.T.); +#156287 = VERTEX_POINT('',#156288); +#156288 = CARTESIAN_POINT('',(154.210596,-108.555859,1.585)); +#156289 = LINE('',#156290,#156291); +#156290 = CARTESIAN_POINT('',(154.221391,-108.524343,1.585)); +#156291 = VECTOR('',#156292,1.); +#156292 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#156293 = ORIENTED_EDGE('',*,*,#156294,.T.); +#156294 = EDGE_CURVE('',#156287,#156295,#156297,.T.); +#156295 = VERTEX_POINT('',#156296); +#156296 = CARTESIAN_POINT('',(154.111828,-108.748024,1.585)); +#156297 = LINE('',#156298,#156299); +#156298 = CARTESIAN_POINT('',(154.210596,-108.555859,1.585)); +#156299 = VECTOR('',#156300,1.); +#156300 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#156301 = ORIENTED_EDGE('',*,*,#156302,.T.); +#156302 = EDGE_CURVE('',#156295,#156303,#156305,.T.); +#156303 = VERTEX_POINT('',#156304); +#156304 = CARTESIAN_POINT('',(153.99681,-108.861033,1.585)); +#156305 = LINE('',#156306,#156307); +#156306 = CARTESIAN_POINT('',(154.111828,-108.748024,1.585)); +#156307 = VECTOR('',#156308,1.); +#156308 = DIRECTION('',(-0.713308962756,-0.700849715454,0.)); +#156309 = ORIENTED_EDGE('',*,*,#156310,.T.); +#156310 = EDGE_CURVE('',#156303,#156311,#156313,.T.); +#156311 = VERTEX_POINT('',#156312); +#156312 = CARTESIAN_POINT('',(153.788952,-108.963375,1.585)); +#156313 = LINE('',#156314,#156315); +#156314 = CARTESIAN_POINT('',(153.99681,-108.861033,1.585)); +#156315 = VECTOR('',#156316,1.); +#156316 = DIRECTION('',(-0.897150308754,-0.441725393771,0.)); +#156317 = ORIENTED_EDGE('',*,*,#156318,.T.); +#156318 = EDGE_CURVE('',#156311,#156319,#156321,.T.); +#156319 = VERTEX_POINT('',#156320); +#156320 = CARTESIAN_POINT('',(153.755936,-108.967814,1.585)); +#156321 = LINE('',#156322,#156323); +#156322 = CARTESIAN_POINT('',(153.788952,-108.963375,1.585)); +#156323 = VECTOR('',#156324,1.); +#156324 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#156325 = ORIENTED_EDGE('',*,*,#156326,.T.); +#156326 = EDGE_CURVE('',#156319,#156327,#156329,.T.); +#156327 = VERTEX_POINT('',#156328); +#156328 = CARTESIAN_POINT('',(153.474407,-108.965412,1.585)); +#156329 = LINE('',#156330,#156331); +#156330 = CARTESIAN_POINT('',(153.755936,-108.967814,1.585)); +#156331 = VECTOR('',#156332,1.); +#156332 = DIRECTION('',(-0.99996360464,8.53167019507E-03,0.)); +#156333 = ORIENTED_EDGE('',*,*,#156334,.T.); +#156334 = EDGE_CURVE('',#156327,#156335,#156337,.T.); +#156335 = VERTEX_POINT('',#156336); +#156336 = CARTESIAN_POINT('',(153.442891,-108.954617,1.585)); +#156337 = LINE('',#156338,#156339); +#156338 = CARTESIAN_POINT('',(153.474407,-108.965412,1.585)); +#156339 = VECTOR('',#156340,1.); +#156340 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#156341 = ORIENTED_EDGE('',*,*,#156342,.T.); +#156342 = EDGE_CURVE('',#156335,#156343,#156345,.T.); +#156343 = VERTEX_POINT('',#156344); +#156344 = CARTESIAN_POINT('',(153.250725,-108.855849,1.585)); +#156345 = LINE('',#156346,#156347); +#156346 = CARTESIAN_POINT('',(153.442891,-108.954617,1.585)); +#156347 = VECTOR('',#156348,1.); +#156348 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#156349 = ORIENTED_EDGE('',*,*,#156350,.T.); +#156350 = EDGE_CURVE('',#156343,#156351,#156353,.T.); +#156351 = VERTEX_POINT('',#156352); +#156352 = CARTESIAN_POINT('',(153.137716,-108.740831,1.585)); +#156353 = LINE('',#156354,#156355); +#156354 = CARTESIAN_POINT('',(153.250725,-108.855849,1.585)); +#156355 = VECTOR('',#156356,1.); +#156356 = DIRECTION('',(-0.700849715454,0.713308962756,0.)); +#156357 = ORIENTED_EDGE('',*,*,#156358,.T.); +#156358 = EDGE_CURVE('',#156351,#156359,#156361,.T.); +#156359 = VERTEX_POINT('',#156360); +#156360 = CARTESIAN_POINT('',(153.035375,-108.532973,1.585)); +#156361 = LINE('',#156362,#156363); +#156362 = CARTESIAN_POINT('',(153.137716,-108.740831,1.585)); +#156363 = VECTOR('',#156364,1.); +#156364 = DIRECTION('',(-0.441721919769,0.897152019223,0.)); +#156365 = ORIENTED_EDGE('',*,*,#156366,.T.); +#156366 = EDGE_CURVE('',#156359,#156367,#156369,.T.); +#156367 = VERTEX_POINT('',#156368); +#156368 = CARTESIAN_POINT('',(153.030936,-108.499957,1.585)); +#156369 = LINE('',#156370,#156371); +#156370 = CARTESIAN_POINT('',(153.035375,-108.532973,1.585)); +#156371 = VECTOR('',#156372,1.); +#156372 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#156373 = ORIENTED_EDGE('',*,*,#156374,.T.); +#156374 = EDGE_CURVE('',#156367,#156375,#156377,.T.); +#156375 = VERTEX_POINT('',#156376); +#156376 = CARTESIAN_POINT('',(153.033338,-107.961285,1.585)); +#156377 = LINE('',#156378,#156379); +#156378 = CARTESIAN_POINT('',(153.030936,-108.499957,1.585)); +#156379 = VECTOR('',#156380,1.); +#156380 = DIRECTION('',(4.459069934992E-03,0.999990058298,0.)); +#156381 = ORIENTED_EDGE('',*,*,#156382,.T.); +#156382 = EDGE_CURVE('',#156375,#156383,#156385,.T.); +#156383 = VERTEX_POINT('',#156384); +#156384 = CARTESIAN_POINT('',(153.044132,-107.92977,1.585)); +#156385 = LINE('',#156386,#156387); +#156386 = CARTESIAN_POINT('',(153.033338,-107.961285,1.585)); +#156387 = VECTOR('',#156388,1.); +#156388 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#156389 = ORIENTED_EDGE('',*,*,#156390,.T.); +#156390 = EDGE_CURVE('',#156383,#156391,#156393,.T.); +#156391 = VERTEX_POINT('',#156392); +#156392 = CARTESIAN_POINT('',(153.1429,-107.737603,1.585)); +#156393 = LINE('',#156394,#156395); +#156394 = CARTESIAN_POINT('',(153.044132,-107.92977,1.585)); +#156395 = VECTOR('',#156396,1.); +#156396 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#156397 = ORIENTED_EDGE('',*,*,#156398,.T.); +#156398 = EDGE_CURVE('',#156391,#156213,#156399,.T.); +#156399 = LINE('',#156400,#156401); +#156400 = CARTESIAN_POINT('',(153.1429,-107.737603,1.585)); +#156401 = VECTOR('',#156402,1.); +#156402 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#156403 = FACE_BOUND('',#156404,.F.); +#156404 = EDGE_LOOP('',(#156405,#156416,#156424,#156433,#156441,#156450, + #156458,#156467)); +#156405 = ORIENTED_EDGE('',*,*,#156406,.T.); +#156406 = EDGE_CURVE('',#156407,#156409,#156411,.T.); +#156407 = VERTEX_POINT('',#156408); +#156408 = CARTESIAN_POINT('',(153.853318,-107.831259,1.585)); +#156409 = VERTEX_POINT('',#156410); +#156410 = CARTESIAN_POINT('',(153.401406,-107.831261,1.585)); +#156411 = CIRCLE('',#156412,0.370245484605); +#156412 = AXIS2_PLACEMENT_3D('',#156413,#156414,#156415); +#156413 = CARTESIAN_POINT('',(153.62736329804,-108.1245612187,1.585)); +#156414 = DIRECTION('',(0.,0.,1.)); +#156415 = DIRECTION('',(0.610283477718,0.792183108142,-0.)); +#156416 = ORIENTED_EDGE('',*,*,#156417,.T.); +#156417 = EDGE_CURVE('',#156409,#156418,#156420,.T.); +#156418 = VERTEX_POINT('',#156419); +#156419 = CARTESIAN_POINT('',(153.344382,-107.888285,1.585)); +#156420 = LINE('',#156421,#156422); +#156421 = CARTESIAN_POINT('',(153.401406,-107.831261,1.585)); +#156422 = VECTOR('',#156423,1.); +#156423 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#156424 = ORIENTED_EDGE('',*,*,#156425,.T.); +#156425 = EDGE_CURVE('',#156418,#156426,#156428,.T.); +#156426 = VERTEX_POINT('',#156427); +#156427 = CARTESIAN_POINT('',(153.344381,-108.597339,1.585)); +#156428 = CIRCLE('',#156429,0.654738608759); +#156429 = AXIS2_PLACEMENT_3D('',#156430,#156431,#156432); +#156430 = CARTESIAN_POINT('',(153.89482972832,-108.2428127763,1.585)); +#156431 = DIRECTION('',(0.,0.,1.)); +#156432 = DIRECTION('',(-0.840713715313,0.541479869326,0.)); +#156433 = ORIENTED_EDGE('',*,*,#156434,.T.); +#156434 = EDGE_CURVE('',#156426,#156435,#156437,.T.); +#156435 = VERTEX_POINT('',#156436); +#156436 = CARTESIAN_POINT('',(153.401409,-108.654368,1.585)); +#156437 = LINE('',#156438,#156439); +#156438 = CARTESIAN_POINT('',(153.344381,-108.597339,1.585)); +#156439 = VECTOR('',#156440,1.); +#156440 = DIRECTION('',(0.707100581568,-0.707112980751,0.)); +#156441 = ORIENTED_EDGE('',*,*,#156442,.T.); +#156442 = EDGE_CURVE('',#156435,#156443,#156445,.T.); +#156443 = VERTEX_POINT('',#156444); +#156444 = CARTESIAN_POINT('',(153.853319,-108.654368,1.585)); +#156445 = CIRCLE('',#156446,0.370241184817); +#156446 = AXIS2_PLACEMENT_3D('',#156447,#156448,#156449); +#156447 = CARTESIAN_POINT('',(153.627364,-108.3610714386,1.585)); +#156448 = DIRECTION('',(0.,0.,1.)); +#156449 = DIRECTION('',(-0.610291370236,-0.792177027826,0.)); +#156450 = ORIENTED_EDGE('',*,*,#156451,.T.); +#156451 = EDGE_CURVE('',#156443,#156452,#156454,.T.); +#156452 = VERTEX_POINT('',#156453); +#156453 = CARTESIAN_POINT('',(153.910347,-108.597339,1.585)); +#156454 = LINE('',#156455,#156456); +#156455 = CARTESIAN_POINT('',(153.853319,-108.654368,1.585)); +#156456 = VECTOR('',#156457,1.); +#156457 = DIRECTION('',(0.707100581568,0.707112980751,0.)); +#156458 = ORIENTED_EDGE('',*,*,#156459,.T.); +#156459 = EDGE_CURVE('',#156452,#156460,#156462,.T.); +#156460 = VERTEX_POINT('',#156461); +#156461 = CARTESIAN_POINT('',(153.910347,-107.888287,1.585)); +#156462 = CIRCLE('',#156463,0.654725611146); +#156463 = AXIS2_PLACEMENT_3D('',#156464,#156465,#156466); +#156464 = CARTESIAN_POINT('',(153.35991358784,-108.242813,1.585)); +#156465 = DIRECTION('',(0.,-0.,1.)); +#156466 = DIRECTION('',(0.840708539246,-0.541487905719,-0.)); +#156467 = ORIENTED_EDGE('',*,*,#156468,.T.); +#156468 = EDGE_CURVE('',#156460,#156407,#156469,.T.); +#156469 = LINE('',#156470,#156471); +#156470 = CARTESIAN_POINT('',(153.910347,-107.888287,1.585)); +#156471 = VECTOR('',#156472,1.); +#156472 = DIRECTION('',(-0.707112980751,0.707100581568,0.)); +#156473 = PLANE('',#156474); +#156474 = AXIS2_PLACEMENT_3D('',#156475,#156476,#156477); +#156475 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156476 = DIRECTION('',(0.,0.,1.)); +#156477 = DIRECTION('',(1.,0.,-0.)); +#156478 = SHELL_BASED_SURFACE_MODEL('',(#156479)); +#156479 = OPEN_SHELL('',(#156480)); +#156480 = ADVANCED_FACE('',(#156481,#156646),#156698,.T.); +#156481 = FACE_BOUND('',#156482,.F.); +#156482 = EDGE_LOOP('',(#156483,#156494,#156502,#156510,#156518,#156526, + #156534,#156542,#156550,#156558,#156566,#156574,#156582,#156590, + #156598,#156607,#156615,#156623,#156631,#156640)); +#156483 = ORIENTED_EDGE('',*,*,#156484,.T.); +#156484 = EDGE_CURVE('',#156485,#156487,#156489,.T.); +#156485 = VERTEX_POINT('',#156486); +#156486 = CARTESIAN_POINT('',(140.347622,-107.018428,1.585)); +#156487 = VERTEX_POINT('',#156488); +#156488 = CARTESIAN_POINT('',(140.445834,-106.920216,1.585)); +#156489 = CIRCLE('',#156490,0.124998078635); +#156490 = AXIS2_PLACEMENT_3D('',#156491,#156492,#156493); +#156491 = CARTESIAN_POINT('',(140.47021854765,-107.0428125476,1.585)); +#156492 = DIRECTION('',(0.,0.,-1.)); +#156493 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#156494 = ORIENTED_EDGE('',*,*,#156495,.T.); +#156495 = EDGE_CURVE('',#156487,#156496,#156498,.T.); +#156496 = VERTEX_POINT('',#156497); +#156497 = CARTESIAN_POINT('',(141.18032,-106.920216,1.585)); +#156498 = LINE('',#156499,#156500); +#156499 = CARTESIAN_POINT('',(140.445834,-106.920216,1.585)); +#156500 = VECTOR('',#156501,1.); +#156501 = DIRECTION('',(1.,0.,0.)); +#156502 = ORIENTED_EDGE('',*,*,#156503,.T.); +#156503 = EDGE_CURVE('',#156496,#156504,#156506,.T.); +#156504 = VERTEX_POINT('',#156505); +#156505 = CARTESIAN_POINT('',(141.211835,-106.93101,1.585)); +#156506 = LINE('',#156507,#156508); +#156507 = CARTESIAN_POINT('',(141.18032,-106.920216,1.585)); +#156508 = VECTOR('',#156509,1.); +#156509 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#156510 = ORIENTED_EDGE('',*,*,#156511,.T.); +#156511 = EDGE_CURVE('',#156504,#156512,#156514,.T.); +#156512 = VERTEX_POINT('',#156513); +#156513 = CARTESIAN_POINT('',(141.404002,-107.029778,1.585)); +#156514 = LINE('',#156515,#156516); +#156515 = CARTESIAN_POINT('',(141.211835,-106.93101,1.585)); +#156516 = VECTOR('',#156517,1.); +#156517 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#156518 = ORIENTED_EDGE('',*,*,#156519,.T.); +#156519 = EDGE_CURVE('',#156512,#156520,#156522,.T.); +#156520 = VERTEX_POINT('',#156521); +#156521 = CARTESIAN_POINT('',(141.51701,-107.144796,1.585)); +#156522 = LINE('',#156523,#156524); +#156523 = CARTESIAN_POINT('',(141.404002,-107.029778,1.585)); +#156524 = VECTOR('',#156525,1.); +#156525 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#156526 = ORIENTED_EDGE('',*,*,#156527,.T.); +#156527 = EDGE_CURVE('',#156520,#156528,#156530,.T.); +#156528 = VERTEX_POINT('',#156529); +#156529 = CARTESIAN_POINT('',(141.619352,-107.352655,1.585)); +#156530 = LINE('',#156531,#156532); +#156531 = CARTESIAN_POINT('',(141.51701,-107.144796,1.585)); +#156532 = VECTOR('',#156533,1.); +#156533 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#156534 = ORIENTED_EDGE('',*,*,#156535,.T.); +#156535 = EDGE_CURVE('',#156528,#156536,#156538,.T.); +#156536 = VERTEX_POINT('',#156537); +#156537 = CARTESIAN_POINT('',(141.623791,-107.385671,1.585)); +#156538 = LINE('',#156539,#156540); +#156539 = CARTESIAN_POINT('',(141.619352,-107.352655,1.585)); +#156540 = VECTOR('',#156541,1.); +#156541 = DIRECTION('',(0.133250982623,-0.991082325355,0.)); +#156542 = ORIENTED_EDGE('',*,*,#156543,.T.); +#156543 = EDGE_CURVE('',#156536,#156544,#156546,.T.); +#156544 = VERTEX_POINT('',#156545); +#156545 = CARTESIAN_POINT('',(141.621389,-107.6672,1.585)); +#156546 = LINE('',#156547,#156548); +#156547 = CARTESIAN_POINT('',(141.623791,-107.385671,1.585)); +#156548 = VECTOR('',#156549,1.); +#156549 = DIRECTION('',(-8.53167019512E-03,-0.99996360464,0.)); +#156550 = ORIENTED_EDGE('',*,*,#156551,.T.); +#156551 = EDGE_CURVE('',#156544,#156552,#156554,.T.); +#156552 = VERTEX_POINT('',#156553); +#156553 = CARTESIAN_POINT('',(141.610594,-107.698716,1.585)); +#156554 = LINE('',#156555,#156556); +#156555 = CARTESIAN_POINT('',(141.621389,-107.6672,1.585)); +#156556 = VECTOR('',#156557,1.); +#156557 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#156558 = ORIENTED_EDGE('',*,*,#156559,.T.); +#156559 = EDGE_CURVE('',#156552,#156560,#156562,.T.); +#156560 = VERTEX_POINT('',#156561); +#156561 = CARTESIAN_POINT('',(141.511826,-107.890881,1.585)); +#156562 = LINE('',#156563,#156564); +#156563 = CARTESIAN_POINT('',(141.610594,-107.698716,1.585)); +#156564 = VECTOR('',#156565,1.); +#156565 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#156566 = ORIENTED_EDGE('',*,*,#156567,.T.); +#156567 = EDGE_CURVE('',#156560,#156568,#156570,.T.); +#156568 = VERTEX_POINT('',#156569); +#156569 = CARTESIAN_POINT('',(141.39681,-108.00389,1.585)); +#156570 = LINE('',#156571,#156572); +#156571 = CARTESIAN_POINT('',(141.511826,-107.890881,1.585)); +#156572 = VECTOR('',#156573,1.); +#156573 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#156574 = ORIENTED_EDGE('',*,*,#156575,.T.); +#156575 = EDGE_CURVE('',#156568,#156576,#156578,.T.); +#156576 = VERTEX_POINT('',#156577); +#156577 = CARTESIAN_POINT('',(141.18895,-108.106232,1.585)); +#156578 = LINE('',#156579,#156580); +#156579 = CARTESIAN_POINT('',(141.39681,-108.00389,1.585)); +#156580 = VECTOR('',#156581,1.); +#156581 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#156582 = ORIENTED_EDGE('',*,*,#156583,.T.); +#156583 = EDGE_CURVE('',#156576,#156584,#156586,.T.); +#156584 = VERTEX_POINT('',#156585); +#156585 = CARTESIAN_POINT('',(141.138873,-108.110671,1.585)); +#156586 = LINE('',#156587,#156588); +#156587 = CARTESIAN_POINT('',(141.18895,-108.106232,1.585)); +#156588 = VECTOR('',#156589,1.); +#156589 = DIRECTION('',(-0.996094168956,-8.829726253542E-02,0.)); +#156590 = ORIENTED_EDGE('',*,*,#156591,.T.); +#156591 = EDGE_CURVE('',#156584,#156592,#156594,.T.); +#156592 = VERTEX_POINT('',#156593); +#156593 = CARTESIAN_POINT('',(141.613211,-108.792486,1.585)); +#156594 = LINE('',#156595,#156596); +#156595 = CARTESIAN_POINT('',(141.138873,-108.110671,1.585)); +#156596 = VECTOR('',#156597,1.); +#156597 = DIRECTION('',(0.571090380246,-0.82088718932,0.)); +#156598 = ORIENTED_EDGE('',*,*,#156599,.T.); +#156599 = EDGE_CURVE('',#156592,#156600,#156602,.T.); +#156600 = VERTEX_POINT('',#156601); +#156601 = CARTESIAN_POINT('',(141.412339,-108.933097,1.585)); +#156602 = CIRCLE('',#156603,0.124999722409); +#156603 = AXIS2_PLACEMENT_3D('',#156604,#156605,#156606); +#156604 = CARTESIAN_POINT('',(141.4987905051,-108.8428137353,1.585)); +#156605 = DIRECTION('',(0.,0.,-1.)); +#156606 = DIRECTION('',(0.915365991948,0.402622777281,0.)); +#156607 = ORIENTED_EDGE('',*,*,#156608,.T.); +#156608 = EDGE_CURVE('',#156600,#156609,#156611,.T.); +#156609 = VERTEX_POINT('',#156610); +#156610 = CARTESIAN_POINT('',(140.833709,-108.110671,1.585)); +#156611 = LINE('',#156612,#156613); +#156612 = CARTESIAN_POINT('',(141.412339,-108.933097,1.585)); +#156613 = VECTOR('',#156614,1.); +#156614 = DIRECTION('',(-0.575417435165,0.817859875106,0.)); +#156615 = ORIENTED_EDGE('',*,*,#156616,.T.); +#156616 = EDGE_CURVE('',#156609,#156617,#156619,.T.); +#156617 = VERTEX_POINT('',#156618); +#156618 = CARTESIAN_POINT('',(140.59522,-108.110671,1.585)); +#156619 = LINE('',#156620,#156621); +#156620 = CARTESIAN_POINT('',(140.833709,-108.110671,1.585)); +#156621 = VECTOR('',#156622,1.); +#156622 = DIRECTION('',(-1.,0.,0.)); +#156623 = ORIENTED_EDGE('',*,*,#156624,.T.); +#156624 = EDGE_CURVE('',#156617,#156625,#156627,.T.); +#156625 = VERTEX_POINT('',#156626); +#156626 = CARTESIAN_POINT('',(140.592818,-108.8672,1.585)); +#156627 = LINE('',#156628,#156629); +#156628 = CARTESIAN_POINT('',(140.59522,-108.110671,1.585)); +#156629 = VECTOR('',#156630,1.); +#156630 = DIRECTION('',(-3.175010995048E-03,-0.99999495964,0.)); +#156631 = ORIENTED_EDGE('',*,*,#156632,.T.); +#156632 = EDGE_CURVE('',#156625,#156633,#156635,.T.); +#156633 = VERTEX_POINT('',#156634); +#156634 = CARTESIAN_POINT('',(140.347622,-108.8672,1.585)); +#156635 = CIRCLE('',#156636,0.1249997864); +#156636 = AXIS2_PLACEMENT_3D('',#156637,#156638,#156639); +#156637 = CARTESIAN_POINT('',(140.47022,-108.842814,1.585)); +#156638 = DIRECTION('',(-0.,0.,-1.)); +#156639 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#156640 = ORIENTED_EDGE('',*,*,#156641,.T.); +#156641 = EDGE_CURVE('',#156633,#156485,#156642,.T.); +#156642 = LINE('',#156643,#156644); +#156643 = CARTESIAN_POINT('',(140.347622,-108.8672,1.585)); +#156644 = VECTOR('',#156645,1.); +#156645 = DIRECTION('',(0.,1.,0.)); +#156646 = FACE_BOUND('',#156647,.F.); +#156647 = EDGE_LOOP('',(#156648,#156659,#156667,#156675,#156683,#156692) + ); +#156648 = ORIENTED_EDGE('',*,*,#156649,.T.); +#156649 = EDGE_CURVE('',#156650,#156652,#156654,.T.); +#156650 = VERTEX_POINT('',#156651); +#156651 = CARTESIAN_POINT('',(141.373791,-107.415179,1.585)); +#156652 = VERTEX_POINT('',#156653); +#156653 = CARTESIAN_POINT('',(141.126425,-107.167814,1.585)); +#156654 = CIRCLE('',#156655,0.347631916063); +#156655 = AXIS2_PLACEMENT_3D('',#156656,#156657,#156658); +#156656 = CARTESIAN_POINT('',(141.03767831879,-107.5039270399,1.585)); +#156657 = DIRECTION('',(0.,0.,1.)); +#156658 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#156659 = ORIENTED_EDGE('',*,*,#156660,.T.); +#156660 = EDGE_CURVE('',#156652,#156661,#156663,.T.); +#156661 = VERTEX_POINT('',#156662); +#156662 = CARTESIAN_POINT('',(140.59522,-107.167814,1.585)); +#156663 = LINE('',#156664,#156665); +#156664 = CARTESIAN_POINT('',(141.126425,-107.167814,1.585)); +#156665 = VECTOR('',#156666,1.); +#156666 = DIRECTION('',(-1.,0.,0.)); +#156667 = ORIENTED_EDGE('',*,*,#156668,.T.); +#156668 = EDGE_CURVE('',#156661,#156669,#156671,.T.); +#156669 = VERTEX_POINT('',#156670); +#156670 = CARTESIAN_POINT('',(140.59522,-107.860671,1.585)); +#156671 = LINE('',#156672,#156673); +#156672 = CARTESIAN_POINT('',(140.59522,-107.167814,1.585)); +#156673 = VECTOR('',#156674,1.); +#156674 = DIRECTION('',(0.,-1.,0.)); +#156675 = ORIENTED_EDGE('',*,*,#156676,.T.); +#156676 = EDGE_CURVE('',#156669,#156677,#156679,.T.); +#156677 = VERTEX_POINT('',#156678); +#156678 = CARTESIAN_POINT('',(141.126425,-107.860671,1.585)); +#156679 = LINE('',#156680,#156681); +#156680 = CARTESIAN_POINT('',(140.59522,-107.860671,1.585)); +#156681 = VECTOR('',#156682,1.); +#156682 = DIRECTION('',(1.,0.,0.)); +#156683 = ORIENTED_EDGE('',*,*,#156684,.T.); +#156684 = EDGE_CURVE('',#156677,#156685,#156687,.T.); +#156685 = VERTEX_POINT('',#156686); +#156686 = CARTESIAN_POINT('',(141.373791,-107.613305,1.585)); +#156687 = CIRCLE('',#156688,0.347641001424); +#156688 = AXIS2_PLACEMENT_3D('',#156689,#156690,#156691); +#156689 = CARTESIAN_POINT('',(141.03767060111,-107.5245506011,1.585)); +#156690 = DIRECTION('',(0.,0.,1.)); +#156691 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#156692 = ORIENTED_EDGE('',*,*,#156693,.T.); +#156693 = EDGE_CURVE('',#156685,#156650,#156694,.T.); +#156694 = LINE('',#156695,#156696); +#156695 = CARTESIAN_POINT('',(141.373791,-107.613305,1.585)); +#156696 = VECTOR('',#156697,1.); +#156697 = DIRECTION('',(0.,1.,0.)); +#156698 = PLANE('',#156699); +#156699 = AXIS2_PLACEMENT_3D('',#156700,#156701,#156702); +#156700 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156701 = DIRECTION('',(0.,0.,1.)); +#156702 = DIRECTION('',(1.,0.,-0.)); +#156703 = SHELL_BASED_SURFACE_MODEL('',(#156704)); +#156704 = OPEN_SHELL('',(#156705)); +#156705 = ADVANCED_FACE('',(#156706),#156824,.T.); +#156706 = FACE_BOUND('',#156707,.F.); +#156707 = EDGE_LOOP('',(#156708,#156719,#156727,#156735,#156744,#156752, + #156760,#156769,#156777,#156785,#156793,#156802,#156810,#156818)); +#156708 = ORIENTED_EDGE('',*,*,#156709,.T.); +#156709 = EDGE_CURVE('',#156710,#156712,#156714,.T.); +#156710 = VERTEX_POINT('',#156711); +#156711 = CARTESIAN_POINT('',(143.572203,-106.93888,1.585)); +#156712 = VERTEX_POINT('',#156713); +#156713 = CARTESIAN_POINT('',(143.764247,-107.018428,1.585)); +#156714 = CIRCLE('',#156715,0.124999692383); +#156715 = AXIS2_PLACEMENT_3D('',#156716,#156717,#156718); +#156716 = CARTESIAN_POINT('',(143.641649,-107.042813518,1.585)); +#156717 = DIRECTION('',(0.,0.,-1.)); +#156718 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#156719 = ORIENTED_EDGE('',*,*,#156720,.T.); +#156720 = EDGE_CURVE('',#156712,#156721,#156723,.T.); +#156721 = VERTEX_POINT('',#156722); +#156722 = CARTESIAN_POINT('',(143.766649,-107.769609,1.585)); +#156723 = LINE('',#156724,#156725); +#156724 = CARTESIAN_POINT('',(143.764247,-107.018428,1.585)); +#156725 = VECTOR('',#156726,1.); +#156726 = DIRECTION('',(3.197615115455E-03,-0.999994887616,0.)); +#156727 = ORIENTED_EDGE('',*,*,#156728,.T.); +#156728 = EDGE_CURVE('',#156721,#156729,#156731,.T.); +#156729 = VERTEX_POINT('',#156730); +#156730 = CARTESIAN_POINT('',(144.600774,-106.938881,1.585)); +#156731 = LINE('',#156732,#156733); +#156732 = CARTESIAN_POINT('',(143.766649,-107.769609,1.585)); +#156733 = VECTOR('',#156734,1.); +#156734 = DIRECTION('',(0.708548101325,0.705662517149,0.)); +#156735 = ORIENTED_EDGE('',*,*,#156736,.T.); +#156736 = EDGE_CURVE('',#156729,#156737,#156739,.T.); +#156737 = VERTEX_POINT('',#156738); +#156738 = CARTESIAN_POINT('',(144.774153,-107.11226,1.585)); +#156739 = CIRCLE('',#156740,0.124999261618); +#156740 = AXIS2_PLACEMENT_3D('',#156741,#156742,#156743); +#156741 = CARTESIAN_POINT('',(144.67022,-107.042814,1.585)); +#156742 = DIRECTION('',(0.,0.,-1.)); +#156743 = DIRECTION('',(-0.555571281791,0.831468911535,0.)); +#156744 = ORIENTED_EDGE('',*,*,#156745,.T.); +#156745 = EDGE_CURVE('',#156737,#156746,#156748,.T.); +#156746 = VERTEX_POINT('',#156747); +#156747 = CARTESIAN_POINT('',(144.063838,-107.825971,1.585)); +#156748 = LINE('',#156749,#156750); +#156749 = CARTESIAN_POINT('',(144.774153,-107.11226,1.585)); +#156750 = VECTOR('',#156751,1.); +#156751 = DIRECTION('',(-0.705418475548,-0.708791065375,0.)); +#156752 = ORIENTED_EDGE('',*,*,#156753,.T.); +#156753 = EDGE_CURVE('',#156746,#156754,#156756,.T.); +#156754 = VERTEX_POINT('',#156755); +#156755 = CARTESIAN_POINT('',(144.78293,-108.788764,1.585)); +#156756 = LINE('',#156757,#156758); +#156757 = CARTESIAN_POINT('',(144.063838,-107.825971,1.585)); +#156758 = VECTOR('',#156759,1.); +#156759 = DIRECTION('',(0.598399589404,-0.801197810407,0.)); +#156760 = ORIENTED_EDGE('',*,*,#156761,.T.); +#156761 = EDGE_CURVE('',#156754,#156762,#156764,.T.); +#156762 = VERTEX_POINT('',#156763); +#156763 = CARTESIAN_POINT('',(144.586773,-108.935881,1.585)); +#156764 = CIRCLE('',#156765,0.124999676414); +#156765 = AXIS2_PLACEMENT_3D('',#156766,#156767,#156768); +#156766 = CARTESIAN_POINT('',(144.67021998436,-108.842813713,1.585)); +#156767 = DIRECTION('',(0.,0.,-1.)); +#156768 = DIRECTION('',(0.901682459294,0.432398823544,0.)); +#156769 = ORIENTED_EDGE('',*,*,#156770,.T.); +#156770 = EDGE_CURVE('',#156762,#156771,#156773,.T.); +#156771 = VERTEX_POINT('',#156772); +#156772 = CARTESIAN_POINT('',(143.885267,-108.004542,1.585)); +#156773 = LINE('',#156774,#156775); +#156774 = CARTESIAN_POINT('',(144.586773,-108.935881,1.585)); +#156775 = VECTOR('',#156776,1.); +#156776 = DIRECTION('',(-0.601646375358,0.798762567362,0.)); +#156777 = ORIENTED_EDGE('',*,*,#156778,.T.); +#156778 = EDGE_CURVE('',#156771,#156779,#156781,.T.); +#156779 = VERTEX_POINT('',#156780); +#156780 = CARTESIAN_POINT('',(143.766649,-108.123161,1.585)); +#156781 = LINE('',#156782,#156783); +#156782 = CARTESIAN_POINT('',(143.885267,-108.004542,1.585)); +#156783 = VECTOR('',#156784,1.); +#156784 = DIRECTION('',(-0.707103800588,-0.707109761773,0.)); +#156785 = ORIENTED_EDGE('',*,*,#156786,.T.); +#156786 = EDGE_CURVE('',#156779,#156787,#156789,.T.); +#156787 = VERTEX_POINT('',#156788); +#156788 = CARTESIAN_POINT('',(143.764247,-108.8672,1.585)); +#156789 = LINE('',#156790,#156791); +#156790 = CARTESIAN_POINT('',(143.766649,-108.123161,1.585)); +#156791 = VECTOR('',#156792,1.); +#156792 = DIRECTION('',(-3.228308574098E-03,-0.999994788998,0.)); +#156793 = ORIENTED_EDGE('',*,*,#156794,.T.); +#156794 = EDGE_CURVE('',#156787,#156795,#156797,.T.); +#156795 = VERTEX_POINT('',#156796); +#156796 = CARTESIAN_POINT('',(143.519051,-108.8672,1.585)); +#156797 = CIRCLE('',#156798,0.1249997864); +#156798 = AXIS2_PLACEMENT_3D('',#156799,#156800,#156801); +#156799 = CARTESIAN_POINT('',(143.641649,-108.842814,1.585)); +#156800 = DIRECTION('',(-0.,0.,-1.)); +#156801 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#156802 = ORIENTED_EDGE('',*,*,#156803,.T.); +#156803 = EDGE_CURVE('',#156795,#156804,#156806,.T.); +#156804 = VERTEX_POINT('',#156805); +#156805 = CARTESIAN_POINT('',(143.519051,-107.018428,1.585)); +#156806 = LINE('',#156807,#156808); +#156807 = CARTESIAN_POINT('',(143.519051,-108.8672,1.585)); +#156808 = VECTOR('',#156809,1.); +#156809 = DIRECTION('',(0.,1.,0.)); +#156810 = ORIENTED_EDGE('',*,*,#156811,.T.); +#156811 = EDGE_CURVE('',#156804,#156812,#156814,.T.); +#156812 = VERTEX_POINT('',#156813); +#156813 = CARTESIAN_POINT('',(143.537715,-106.973368,1.585)); +#156814 = LINE('',#156815,#156816); +#156815 = CARTESIAN_POINT('',(143.519051,-107.018428,1.585)); +#156816 = VECTOR('',#156817,1.); +#156817 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#156818 = ORIENTED_EDGE('',*,*,#156819,.T.); +#156819 = EDGE_CURVE('',#156812,#156710,#156820,.T.); +#156820 = LINE('',#156821,#156822); +#156821 = CARTESIAN_POINT('',(143.537715,-106.973368,1.585)); +#156822 = VECTOR('',#156823,1.); +#156823 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#156824 = PLANE('',#156825); +#156825 = AXIS2_PLACEMENT_3D('',#156826,#156827,#156828); +#156826 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156827 = DIRECTION('',(0.,0.,1.)); +#156828 = DIRECTION('',(1.,0.,-0.)); +#156829 = SHELL_BASED_SURFACE_MODEL('',(#156830)); +#156830 = OPEN_SHELL('',(#156831)); +#156831 = ADVANCED_FACE('',(#156832,#156933),#156959,.T.); +#156832 = FACE_BOUND('',#156833,.F.); +#156833 = EDGE_LOOP('',(#156834,#156845,#156853,#156861,#156869,#156877, + #156885,#156894,#156902,#156910,#156918,#156927)); +#156834 = ORIENTED_EDGE('',*,*,#156835,.T.); +#156835 = EDGE_CURVE('',#156836,#156838,#156840,.T.); +#156836 = VERTEX_POINT('',#156837); +#156837 = CARTESIAN_POINT('',(115.504483,-106.98091,1.585)); +#156838 = VERTEX_POINT('',#156839); +#156839 = CARTESIAN_POINT('',(115.628712,-106.918795,1.585)); +#156840 = CIRCLE('',#156841,0.124999669127); +#156841 = AXIS2_PLACEMENT_3D('',#156842,#156843,#156844); +#156842 = CARTESIAN_POINT('',(115.6130781992,-107.0428131501,1.585)); +#156843 = DIRECTION('',(0.,0.,-1.)); +#156844 = DIRECTION('',(-0.868763893211,0.495226511663,0.)); +#156845 = ORIENTED_EDGE('',*,*,#156846,.T.); +#156846 = EDGE_CURVE('',#156838,#156847,#156849,.T.); +#156847 = VERTEX_POINT('',#156848); +#156848 = CARTESIAN_POINT('',(115.637187,-106.92162,1.585)); +#156849 = LINE('',#156850,#156851); +#156850 = CARTESIAN_POINT('',(115.628712,-106.918795,1.585)); +#156851 = VECTOR('',#156852,1.); +#156852 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#156853 = ORIENTED_EDGE('',*,*,#156854,.T.); +#156854 = EDGE_CURVE('',#156847,#156855,#156857,.T.); +#156855 = VERTEX_POINT('',#156856); +#156856 = CARTESIAN_POINT('',(115.681731,-106.940071,1.585)); +#156857 = LINE('',#156858,#156859); +#156858 = CARTESIAN_POINT('',(115.637187,-106.92162,1.585)); +#156859 = VECTOR('',#156860,1.); +#156860 = DIRECTION('',(0.923877544693,-0.382688231347,0.)); +#156861 = ORIENTED_EDGE('',*,*,#156862,.T.); +#156862 = EDGE_CURVE('',#156855,#156863,#156865,.T.); +#156863 = VERTEX_POINT('',#156864); +#156864 = CARTESIAN_POINT('',(115.715822,-106.974165,1.585)); +#156865 = LINE('',#156866,#156867); +#156866 = CARTESIAN_POINT('',(115.681731,-106.940071,1.585)); +#156867 = VECTOR('',#156868,1.); +#156868 = DIRECTION('',(0.707075669256,-0.707137891749,0.)); +#156869 = ORIENTED_EDGE('',*,*,#156870,.T.); +#156870 = EDGE_CURVE('',#156863,#156871,#156873,.T.); +#156871 = VERTEX_POINT('',#156872); +#156872 = CARTESIAN_POINT('',(115.731663,-107.003286,1.585)); +#156873 = LINE('',#156874,#156875); +#156874 = CARTESIAN_POINT('',(115.715822,-106.974165,1.585)); +#156875 = VECTOR('',#156876,1.); +#156876 = DIRECTION('',(0.477847909994,-0.878442584871,0.)); +#156877 = ORIENTED_EDGE('',*,*,#156878,.T.); +#156878 = EDGE_CURVE('',#156871,#156879,#156881,.T.); +#156879 = VERTEX_POINT('',#156880); +#156880 = CARTESIAN_POINT('',(116.337096,-108.82718,1.585)); +#156881 = LINE('',#156882,#156883); +#156882 = CARTESIAN_POINT('',(115.731663,-107.003286,1.585)); +#156883 = VECTOR('',#156884,1.); +#156884 = DIRECTION('',(0.315041883433,-0.949077769038,0.)); +#156885 = ORIENTED_EDGE('',*,*,#156886,.T.); +#156886 = EDGE_CURVE('',#156879,#156887,#156889,.T.); +#156887 = VERTEX_POINT('',#156888); +#156888 = CARTESIAN_POINT('',(116.104483,-108.904718,1.585)); +#156889 = CIRCLE('',#156890,0.124999459985); +#156890 = AXIS2_PLACEMENT_3D('',#156891,#156892,#156893); +#156891 = CARTESIAN_POINT('',(116.21307825953,-108.842815378,1.585)); +#156892 = DIRECTION('',(0.,0.,-1.)); +#156893 = DIRECTION('',(0.992146209888,0.12508356489,0.)); +#156894 = ORIENTED_EDGE('',*,*,#156895,.T.); +#156895 = EDGE_CURVE('',#156887,#156896,#156898,.T.); +#156896 = VERTEX_POINT('',#156897); +#156897 = CARTESIAN_POINT('',(115.951555,-108.453528,1.585)); +#156898 = LINE('',#156899,#156900); +#156899 = CARTESIAN_POINT('',(116.104483,-108.904718,1.585)); +#156900 = VECTOR('',#156901,1.); +#156901 = DIRECTION('',(-0.321005838701,0.947077215184,0.)); +#156902 = ORIENTED_EDGE('',*,*,#156903,.T.); +#156903 = EDGE_CURVE('',#156896,#156904,#156906,.T.); +#156904 = VERTEX_POINT('',#156905); +#156905 = CARTESIAN_POINT('',(115.274601,-108.453528,1.585)); +#156906 = LINE('',#156907,#156908); +#156907 = CARTESIAN_POINT('',(115.951555,-108.453528,1.585)); +#156908 = VECTOR('',#156909,1.); +#156909 = DIRECTION('',(-1.,0.,0.)); +#156910 = ORIENTED_EDGE('',*,*,#156911,.T.); +#156911 = EDGE_CURVE('',#156904,#156912,#156914,.T.); +#156912 = VERTEX_POINT('',#156913); +#156913 = CARTESIAN_POINT('',(115.121673,-108.904717,1.585)); +#156914 = LINE('',#156915,#156916); +#156915 = CARTESIAN_POINT('',(115.274601,-108.453528,1.585)); +#156916 = VECTOR('',#156917,1.); +#156917 = DIRECTION('',(-0.321006476855,-0.947076998885,0.)); +#156918 = ORIENTED_EDGE('',*,*,#156919,.T.); +#156919 = EDGE_CURVE('',#156912,#156920,#156922,.T.); +#156920 = VERTEX_POINT('',#156921); +#156921 = CARTESIAN_POINT('',(114.88906,-108.82718,1.585)); +#156922 = CIRCLE('',#156923,0.124999465062); +#156923 = AXIS2_PLACEMENT_3D('',#156924,#156925,#156926); +#156924 = CARTESIAN_POINT('',(115.01307791055,-108.8428140694,1.585)); +#156925 = DIRECTION('',(-0.,0.,-1.)); +#156926 = DIRECTION('',(0.868764433415,-0.495225563995,-0.)); +#156927 = ORIENTED_EDGE('',*,*,#156928,.T.); +#156928 = EDGE_CURVE('',#156920,#156836,#156929,.T.); +#156929 = LINE('',#156930,#156931); +#156930 = CARTESIAN_POINT('',(114.88906,-108.82718,1.585)); +#156931 = VECTOR('',#156932,1.); +#156932 = DIRECTION('',(0.316227611865,0.948683349434,0.)); +#156933 = FACE_BOUND('',#156934,.F.); +#156934 = EDGE_LOOP('',(#156935,#156945,#156953)); +#156935 = ORIENTED_EDGE('',*,*,#156936,.T.); +#156936 = EDGE_CURVE('',#156937,#156939,#156941,.T.); +#156937 = VERTEX_POINT('',#156938); +#156938 = CARTESIAN_POINT('',(115.357935,-108.203528,1.585)); +#156939 = VERTEX_POINT('',#156940); +#156940 = CARTESIAN_POINT('',(115.868221,-108.203528,1.585)); +#156941 = LINE('',#156942,#156943); +#156942 = CARTESIAN_POINT('',(115.357935,-108.203528,1.585)); +#156943 = VECTOR('',#156944,1.); +#156944 = DIRECTION('',(1.,0.,0.)); +#156945 = ORIENTED_EDGE('',*,*,#156946,.T.); +#156946 = EDGE_CURVE('',#156939,#156947,#156949,.T.); +#156947 = VERTEX_POINT('',#156948); +#156948 = CARTESIAN_POINT('',(115.613078,-107.438098,1.585)); +#156949 = LINE('',#156950,#156951); +#156950 = CARTESIAN_POINT('',(115.868221,-108.203528,1.585)); +#156951 = VECTOR('',#156952,1.); +#156952 = DIRECTION('',(-0.316227394193,0.948683421992,0.)); +#156953 = ORIENTED_EDGE('',*,*,#156954,.T.); +#156954 = EDGE_CURVE('',#156947,#156937,#156955,.T.); +#156955 = LINE('',#156956,#156957); +#156956 = CARTESIAN_POINT('',(115.613078,-107.438098,1.585)); +#156957 = VECTOR('',#156958,1.); +#156958 = DIRECTION('',(-0.316227394193,-0.948683421992,0.)); +#156959 = PLANE('',#156960); +#156960 = AXIS2_PLACEMENT_3D('',#156961,#156962,#156963); +#156961 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156962 = DIRECTION('',(0.,0.,1.)); +#156963 = DIRECTION('',(1.,0.,-0.)); +#156964 = SHELL_BASED_SURFACE_MODEL('',(#156965)); +#156965 = OPEN_SHELL('',(#156966)); +#156966 = ADVANCED_FACE('',(#156967),#157067,.T.); +#156967 = FACE_BOUND('',#156968,.F.); +#156968 = EDGE_LOOP('',(#156969,#156980,#156988,#156996,#157004,#157013, + #157021,#157029,#157037,#157045,#157053,#157061)); +#156969 = ORIENTED_EDGE('',*,*,#156970,.T.); +#156970 = EDGE_CURVE('',#156971,#156973,#156975,.T.); +#156971 = VERTEX_POINT('',#156972); +#156972 = CARTESIAN_POINT('',(127.71506,-106.93888,1.585)); +#156973 = VERTEX_POINT('',#156974); +#156974 = CARTESIAN_POINT('',(127.907104,-107.018428,1.585)); +#156975 = CIRCLE('',#156976,0.124999692383); +#156976 = AXIS2_PLACEMENT_3D('',#156977,#156978,#156979); +#156977 = CARTESIAN_POINT('',(127.784506,-107.042813518,1.585)); +#156978 = DIRECTION('',(0.,0.,-1.)); +#156979 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#156980 = ORIENTED_EDGE('',*,*,#156981,.T.); +#156981 = EDGE_CURVE('',#156973,#156982,#156984,.T.); +#156982 = VERTEX_POINT('',#156983); +#156983 = CARTESIAN_POINT('',(127.909506,-108.556162,1.585)); +#156984 = LINE('',#156985,#156986); +#156985 = CARTESIAN_POINT('',(127.907104,-107.018428,1.585)); +#156986 = VECTOR('',#156987,1.); +#156987 = DIRECTION('',(1.562036782432E-03,-0.99999878002,0.)); +#156988 = ORIENTED_EDGE('',*,*,#156989,.T.); +#156989 = EDGE_CURVE('',#156982,#156990,#156992,.T.); +#156990 = VERTEX_POINT('',#156991); +#156991 = CARTESIAN_POINT('',(127.963389,-108.66393,1.585)); +#156992 = LINE('',#156993,#156994); +#156993 = CARTESIAN_POINT('',(127.909506,-108.556162,1.585)); +#156994 = VECTOR('',#156995,1.); +#156995 = DIRECTION('',(0.447206955814,-0.894430510812,0.)); +#156996 = ORIENTED_EDGE('',*,*,#156997,.T.); +#156997 = EDGE_CURVE('',#156990,#156998,#157000,.T.); +#156998 = VERTEX_POINT('',#156999); +#156999 = CARTESIAN_POINT('',(128.118288,-108.744064,1.585)); +#157000 = LINE('',#157001,#157002); +#157001 = CARTESIAN_POINT('',(127.963389,-108.66393,1.585)); +#157002 = VECTOR('',#157003,1.); +#157003 = DIRECTION('',(0.888185286551,-0.45948546958,0.)); +#157004 = ORIENTED_EDGE('',*,*,#157005,.T.); +#157005 = EDGE_CURVE('',#156998,#157006,#157008,.T.); +#157006 = VERTEX_POINT('',#157007); +#157007 = CARTESIAN_POINT('',(128.008633,-108.963375,1.585)); +#157008 = CIRCLE('',#157009,0.125000271896); +#157009 = AXIS2_PLACEMENT_3D('',#157010,#157011,#157012); +#157010 = CARTESIAN_POINT('',(128.04164884032,-108.8428137198,1.585)); +#157011 = DIRECTION('',(0.,0.,-1.)); +#157012 = DIRECTION('',(0.613111943766,0.789996040757,0.)); +#157013 = ORIENTED_EDGE('',*,*,#157014,.T.); +#157014 = EDGE_CURVE('',#157006,#157015,#157017,.T.); +#157015 = VERTEX_POINT('',#157016); +#157016 = CARTESIAN_POINT('',(127.793581,-108.855849,1.585)); +#157017 = LINE('',#157018,#157019); +#157018 = CARTESIAN_POINT('',(128.008633,-108.963375,1.585)); +#157019 = VECTOR('',#157020,1.); +#157020 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#157021 = ORIENTED_EDGE('',*,*,#157022,.T.); +#157022 = EDGE_CURVE('',#157015,#157023,#157025,.T.); +#157023 = VERTEX_POINT('',#157024); +#157024 = CARTESIAN_POINT('',(127.760983,-108.81708,1.585)); +#157025 = LINE('',#157026,#157027); +#157026 = CARTESIAN_POINT('',(127.793581,-108.855849,1.585)); +#157027 = VECTOR('',#157028,1.); +#157028 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#157029 = ORIENTED_EDGE('',*,*,#157030,.T.); +#157030 = EDGE_CURVE('',#157023,#157031,#157033,.T.); +#157031 = VERTEX_POINT('',#157032); +#157032 = CARTESIAN_POINT('',(127.663945,-108.618687,1.585)); +#157033 = LINE('',#157034,#157035); +#157034 = CARTESIAN_POINT('',(127.760983,-108.81708,1.585)); +#157035 = VECTOR('',#157036,1.); +#157036 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#157037 = ORIENTED_EDGE('',*,*,#157038,.T.); +#157038 = EDGE_CURVE('',#157031,#157039,#157041,.T.); +#157039 = VERTEX_POINT('',#157040); +#157040 = CARTESIAN_POINT('',(127.659506,-108.585671,1.585)); +#157041 = LINE('',#157042,#157043); +#157042 = CARTESIAN_POINT('',(127.663945,-108.618687,1.585)); +#157043 = VECTOR('',#157044,1.); +#157044 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#157045 = ORIENTED_EDGE('',*,*,#157046,.T.); +#157046 = EDGE_CURVE('',#157039,#157047,#157049,.T.); +#157047 = VERTEX_POINT('',#157048); +#157048 = CARTESIAN_POINT('',(127.661908,-107.018428,1.585)); +#157049 = LINE('',#157050,#157051); +#157050 = CARTESIAN_POINT('',(127.659506,-108.585671,1.585)); +#157051 = VECTOR('',#157052,1.); +#157052 = DIRECTION('',(1.532625878005E-03,0.999998825528,0.)); +#157053 = ORIENTED_EDGE('',*,*,#157054,.T.); +#157054 = EDGE_CURVE('',#157047,#157055,#157057,.T.); +#157055 = VERTEX_POINT('',#157056); +#157056 = CARTESIAN_POINT('',(127.680572,-106.973368,1.585)); +#157057 = LINE('',#157058,#157059); +#157058 = CARTESIAN_POINT('',(127.661908,-107.018428,1.585)); +#157059 = VECTOR('',#157060,1.); +#157060 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157061 = ORIENTED_EDGE('',*,*,#157062,.T.); +#157062 = EDGE_CURVE('',#157055,#156971,#157063,.T.); +#157063 = LINE('',#157064,#157065); +#157064 = CARTESIAN_POINT('',(127.680572,-106.973368,1.585)); +#157065 = VECTOR('',#157066,1.); +#157066 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157067 = PLANE('',#157068); +#157068 = AXIS2_PLACEMENT_3D('',#157069,#157070,#157071); +#157069 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157070 = DIRECTION('',(0.,0.,1.)); +#157071 = DIRECTION('',(1.,0.,-0.)); +#157072 = SHELL_BASED_SURFACE_MODEL('',(#157073)); +#157073 = OPEN_SHELL('',(#157074)); +#157074 = ADVANCED_FACE('',(#157075),#157175,.T.); +#157075 = FACE_BOUND('',#157076,.F.); +#157076 = EDGE_LOOP('',(#157077,#157088,#157096,#157104,#157112,#157121, + #157129,#157137,#157145,#157153,#157161,#157169)); +#157077 = ORIENTED_EDGE('',*,*,#157078,.T.); +#157078 = EDGE_CURVE('',#157079,#157081,#157083,.T.); +#157079 = VERTEX_POINT('',#157080); +#157080 = CARTESIAN_POINT('',(137.91506,-106.93888,1.585)); +#157081 = VERTEX_POINT('',#157082); +#157082 = CARTESIAN_POINT('',(138.107104,-107.018428,1.585)); +#157083 = CIRCLE('',#157084,0.124999692383); +#157084 = AXIS2_PLACEMENT_3D('',#157085,#157086,#157087); +#157085 = CARTESIAN_POINT('',(137.984506,-107.042813518,1.585)); +#157086 = DIRECTION('',(0.,0.,-1.)); +#157087 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157088 = ORIENTED_EDGE('',*,*,#157089,.T.); +#157089 = EDGE_CURVE('',#157081,#157090,#157092,.T.); +#157090 = VERTEX_POINT('',#157091); +#157091 = CARTESIAN_POINT('',(138.109506,-108.556162,1.585)); +#157092 = LINE('',#157093,#157094); +#157093 = CARTESIAN_POINT('',(138.107104,-107.018428,1.585)); +#157094 = VECTOR('',#157095,1.); +#157095 = DIRECTION('',(1.562036782451E-03,-0.99999878002,0.)); +#157096 = ORIENTED_EDGE('',*,*,#157097,.T.); +#157097 = EDGE_CURVE('',#157090,#157098,#157100,.T.); +#157098 = VERTEX_POINT('',#157099); +#157099 = CARTESIAN_POINT('',(138.163389,-108.66393,1.585)); +#157100 = LINE('',#157101,#157102); +#157101 = CARTESIAN_POINT('',(138.109506,-108.556162,1.585)); +#157102 = VECTOR('',#157103,1.); +#157103 = DIRECTION('',(0.447206955813,-0.894430510812,0.)); +#157104 = ORIENTED_EDGE('',*,*,#157105,.T.); +#157105 = EDGE_CURVE('',#157098,#157106,#157108,.T.); +#157106 = VERTEX_POINT('',#157107); +#157107 = CARTESIAN_POINT('',(138.318288,-108.744064,1.585)); +#157108 = LINE('',#157109,#157110); +#157109 = CARTESIAN_POINT('',(138.163389,-108.66393,1.585)); +#157110 = VECTOR('',#157111,1.); +#157111 = DIRECTION('',(0.888185286551,-0.45948546958,0.)); +#157112 = ORIENTED_EDGE('',*,*,#157113,.T.); +#157113 = EDGE_CURVE('',#157106,#157114,#157116,.T.); +#157114 = VERTEX_POINT('',#157115); +#157115 = CARTESIAN_POINT('',(138.208633,-108.963375,1.585)); +#157116 = CIRCLE('',#157117,0.125000271896); +#157117 = AXIS2_PLACEMENT_3D('',#157118,#157119,#157120); +#157118 = CARTESIAN_POINT('',(138.24164884032,-108.8428137198,1.585)); +#157119 = DIRECTION('',(0.,0.,-1.)); +#157120 = DIRECTION('',(0.613111943766,0.789996040757,0.)); +#157121 = ORIENTED_EDGE('',*,*,#157122,.T.); +#157122 = EDGE_CURVE('',#157114,#157123,#157125,.T.); +#157123 = VERTEX_POINT('',#157124); +#157124 = CARTESIAN_POINT('',(137.993581,-108.855849,1.585)); +#157125 = LINE('',#157126,#157127); +#157126 = CARTESIAN_POINT('',(138.208633,-108.963375,1.585)); +#157127 = VECTOR('',#157128,1.); +#157128 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#157129 = ORIENTED_EDGE('',*,*,#157130,.T.); +#157130 = EDGE_CURVE('',#157123,#157131,#157133,.T.); +#157131 = VERTEX_POINT('',#157132); +#157132 = CARTESIAN_POINT('',(137.960983,-108.81708,1.585)); +#157133 = LINE('',#157134,#157135); +#157134 = CARTESIAN_POINT('',(137.993581,-108.855849,1.585)); +#157135 = VECTOR('',#157136,1.); +#157136 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#157137 = ORIENTED_EDGE('',*,*,#157138,.T.); +#157138 = EDGE_CURVE('',#157131,#157139,#157141,.T.); +#157139 = VERTEX_POINT('',#157140); +#157140 = CARTESIAN_POINT('',(137.863945,-108.618687,1.585)); +#157141 = LINE('',#157142,#157143); +#157142 = CARTESIAN_POINT('',(137.960983,-108.81708,1.585)); +#157143 = VECTOR('',#157144,1.); +#157144 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#157145 = ORIENTED_EDGE('',*,*,#157146,.T.); +#157146 = EDGE_CURVE('',#157139,#157147,#157149,.T.); +#157147 = VERTEX_POINT('',#157148); +#157148 = CARTESIAN_POINT('',(137.859506,-108.585671,1.585)); +#157149 = LINE('',#157150,#157151); +#157150 = CARTESIAN_POINT('',(137.863945,-108.618687,1.585)); +#157151 = VECTOR('',#157152,1.); +#157152 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#157153 = ORIENTED_EDGE('',*,*,#157154,.T.); +#157154 = EDGE_CURVE('',#157147,#157155,#157157,.T.); +#157155 = VERTEX_POINT('',#157156); +#157156 = CARTESIAN_POINT('',(137.861908,-107.018428,1.585)); +#157157 = LINE('',#157158,#157159); +#157158 = CARTESIAN_POINT('',(137.859506,-108.585671,1.585)); +#157159 = VECTOR('',#157160,1.); +#157160 = DIRECTION('',(1.532625877996E-03,0.999998825528,0.)); +#157161 = ORIENTED_EDGE('',*,*,#157162,.T.); +#157162 = EDGE_CURVE('',#157155,#157163,#157165,.T.); +#157163 = VERTEX_POINT('',#157164); +#157164 = CARTESIAN_POINT('',(137.880572,-106.973368,1.585)); +#157165 = LINE('',#157166,#157167); +#157166 = CARTESIAN_POINT('',(137.861908,-107.018428,1.585)); +#157167 = VECTOR('',#157168,1.); +#157168 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157169 = ORIENTED_EDGE('',*,*,#157170,.T.); +#157170 = EDGE_CURVE('',#157163,#157079,#157171,.T.); +#157171 = LINE('',#157172,#157173); +#157172 = CARTESIAN_POINT('',(137.880572,-106.973368,1.585)); +#157173 = VECTOR('',#157174,1.); +#157174 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#157175 = PLANE('',#157176); +#157176 = AXIS2_PLACEMENT_3D('',#157177,#157178,#157179); +#157177 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157178 = DIRECTION('',(0.,0.,1.)); +#157179 = DIRECTION('',(1.,0.,-0.)); +#157180 = SHELL_BASED_SURFACE_MODEL('',(#157181)); +#157181 = OPEN_SHELL('',(#157182)); +#157182 = ADVANCED_FACE('',(#157183),#157269,.T.); +#157183 = FACE_BOUND('',#157184,.F.); +#157184 = EDGE_LOOP('',(#157185,#157196,#157204,#157212,#157220,#157229, + #157237,#157246,#157254,#157263)); +#157185 = ORIENTED_EDGE('',*,*,#157186,.T.); +#157186 = EDGE_CURVE('',#157187,#157189,#157191,.T.); +#157187 = VERTEX_POINT('',#157188); +#157188 = CARTESIAN_POINT('',(116.69048,-107.618428,1.585)); +#157189 = VERTEX_POINT('',#157190); +#157190 = CARTESIAN_POINT('',(116.933878,-107.614088,1.585)); +#157191 = CIRCLE('',#157192,0.12449085405); +#157192 = AXIS2_PLACEMENT_3D('',#157193,#157194,#157195); +#157193 = CARTESIAN_POINT('',(116.81264479231,-107.6423807923,1.585)); +#157194 = DIRECTION('',(0.,0.,-1.)); +#157195 = DIRECTION('',(-0.981315400644,0.192406040597,0.)); +#157196 = ORIENTED_EDGE('',*,*,#157197,.T.); +#157197 = EDGE_CURVE('',#157189,#157198,#157200,.T.); +#157198 = VERTEX_POINT('',#157199); +#157199 = CARTESIAN_POINT('',(117.122919,-107.522253,1.585)); +#157200 = LINE('',#157201,#157202); +#157201 = CARTESIAN_POINT('',(116.933878,-107.614088,1.585)); +#157202 = VECTOR('',#157203,1.); +#157203 = DIRECTION('',(0.899479947392,0.436962039815,0.)); +#157204 = ORIENTED_EDGE('',*,*,#157205,.T.); +#157205 = EDGE_CURVE('',#157198,#157206,#157208,.T.); +#157206 = VERTEX_POINT('',#157207); +#157207 = CARTESIAN_POINT('',(117.155935,-107.517814,1.585)); +#157208 = LINE('',#157209,#157210); +#157209 = CARTESIAN_POINT('',(117.122919,-107.522253,1.585)); +#157210 = VECTOR('',#157211,1.); +#157211 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157212 = ORIENTED_EDGE('',*,*,#157213,.T.); +#157213 = EDGE_CURVE('',#157206,#157214,#157216,.T.); +#157214 = VERTEX_POINT('',#157215); +#157215 = CARTESIAN_POINT('',(117.35175,-107.520216,1.585)); +#157216 = LINE('',#157217,#157218); +#157217 = CARTESIAN_POINT('',(117.155935,-107.517814,1.585)); +#157218 = VECTOR('',#157219,1.); +#157219 = DIRECTION('',(0.999924772767,-1.226575749656E-02,0.)); +#157220 = ORIENTED_EDGE('',*,*,#157221,.T.); +#157221 = EDGE_CURVE('',#157214,#157222,#157224,.T.); +#157222 = VERTEX_POINT('',#157223); +#157223 = CARTESIAN_POINT('',(117.35175,-107.765412,1.585)); +#157224 = CIRCLE('',#157225,0.1249997864); +#157225 = AXIS2_PLACEMENT_3D('',#157226,#157227,#157228); +#157226 = CARTESIAN_POINT('',(117.327364,-107.642814,1.585)); +#157227 = DIRECTION('',(0.,0.,-1.)); +#157228 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#157229 = ORIENTED_EDGE('',*,*,#157230,.T.); +#157230 = EDGE_CURVE('',#157222,#157231,#157233,.T.); +#157231 = VERTEX_POINT('',#157232); +#157232 = CARTESIAN_POINT('',(117.185444,-107.767814,1.585)); +#157233 = LINE('',#157234,#157235); +#157234 = CARTESIAN_POINT('',(117.35175,-107.765412,1.585)); +#157235 = VECTOR('',#157236,1.); +#157236 = DIRECTION('',(-0.999895712506,-1.444174895339E-02,0.)); +#157237 = ORIENTED_EDGE('',*,*,#157238,.T.); +#157238 = EDGE_CURVE('',#157231,#157239,#157241,.T.); +#157239 = VERTEX_POINT('',#157240); +#157240 = CARTESIAN_POINT('',(116.938078,-108.015179,1.585)); +#157241 = CIRCLE('',#157242,0.347632380397); +#157242 = AXIS2_PLACEMENT_3D('',#157243,#157244,#157245); +#157243 = CARTESIAN_POINT('',(117.27419106113,-108.1039274199,1.585)); +#157244 = DIRECTION('',(0.,0.,1.)); +#157245 = DIRECTION('',(-0.25528997337,0.966864535236,0.)); +#157246 = ORIENTED_EDGE('',*,*,#157247,.T.); +#157247 = EDGE_CURVE('',#157239,#157248,#157250,.T.); +#157248 = VERTEX_POINT('',#157249); +#157249 = CARTESIAN_POINT('',(116.935676,-108.8672,1.585)); +#157250 = LINE('',#157251,#157252); +#157251 = CARTESIAN_POINT('',(116.938078,-108.015179,1.585)); +#157252 = VECTOR('',#157253,1.); +#157253 = DIRECTION('',(-2.81916813645E-03,-0.999996026138,0.)); +#157254 = ORIENTED_EDGE('',*,*,#157255,.T.); +#157255 = EDGE_CURVE('',#157248,#157256,#157258,.T.); +#157256 = VERTEX_POINT('',#157257); +#157257 = CARTESIAN_POINT('',(116.69048,-108.8672,1.585)); +#157258 = CIRCLE('',#157259,0.1249997864); +#157259 = AXIS2_PLACEMENT_3D('',#157260,#157261,#157262); +#157260 = CARTESIAN_POINT('',(116.813078,-108.842814,1.585)); +#157261 = DIRECTION('',(-0.,0.,-1.)); +#157262 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157263 = ORIENTED_EDGE('',*,*,#157264,.T.); +#157264 = EDGE_CURVE('',#157256,#157187,#157265,.T.); +#157265 = LINE('',#157266,#157267); +#157266 = CARTESIAN_POINT('',(116.69048,-108.8672,1.585)); +#157267 = VECTOR('',#157268,1.); +#157268 = DIRECTION('',(0.,1.,0.)); +#157269 = PLANE('',#157270); +#157270 = AXIS2_PLACEMENT_3D('',#157271,#157272,#157273); +#157271 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157272 = DIRECTION('',(0.,0.,1.)); +#157273 = DIRECTION('',(1.,0.,-0.)); +#157274 = SHELL_BASED_SURFACE_MODEL('',(#157275)); +#157275 = OPEN_SHELL('',(#157276)); +#157276 = ADVANCED_FACE('',(#157277,#157457),#157525,.T.); +#157277 = FACE_BOUND('',#157278,.F.); +#157278 = EDGE_LOOP('',(#157279,#157290,#157298,#157307,#157315,#157323, + #157331,#157339,#157347,#157355,#157363,#157371,#157379,#157387, + #157395,#157403,#157411,#157419,#157427,#157435,#157443,#157451)); +#157279 = ORIENTED_EDGE('',*,*,#157280,.T.); +#157280 = EDGE_CURVE('',#157281,#157283,#157285,.T.); +#157281 = VERTEX_POINT('',#157282); +#157282 = CARTESIAN_POINT('',(118.629347,-106.93888,1.585)); +#157283 = VERTEX_POINT('',#157284); +#157284 = CARTESIAN_POINT('',(118.821391,-107.018428,1.585)); +#157285 = CIRCLE('',#157286,0.124999692383); +#157286 = AXIS2_PLACEMENT_3D('',#157287,#157288,#157289); +#157287 = CARTESIAN_POINT('',(118.698793,-107.042813518,1.585)); +#157288 = DIRECTION('',(0.,0.,-1.)); +#157289 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157290 = ORIENTED_EDGE('',*,*,#157291,.T.); +#157291 = EDGE_CURVE('',#157283,#157292,#157294,.T.); +#157292 = VERTEX_POINT('',#157293); +#157293 = CARTESIAN_POINT('',(118.821391,-108.8672,1.585)); +#157294 = LINE('',#157295,#157296); +#157295 = CARTESIAN_POINT('',(118.821391,-107.018428,1.585)); +#157296 = VECTOR('',#157297,1.); +#157297 = DIRECTION('',(0.,-1.,0.)); +#157298 = ORIENTED_EDGE('',*,*,#157299,.T.); +#157299 = EDGE_CURVE('',#157292,#157300,#157302,.T.); +#157300 = VERTEX_POINT('',#157301); +#157301 = CARTESIAN_POINT('',(118.629347,-108.946748,1.585)); +#157302 = CIRCLE('',#157303,0.124999692383); +#157303 = AXIS2_PLACEMENT_3D('',#157304,#157305,#157306); +#157304 = CARTESIAN_POINT('',(118.698793,-108.8428144819,1.585)); +#157305 = DIRECTION('',(-0.,0.,-1.)); +#157306 = DIRECTION('',(0.980786413651,-0.195084624708,-0.)); +#157307 = ORIENTED_EDGE('',*,*,#157308,.T.); +#157308 = EDGE_CURVE('',#157300,#157309,#157311,.T.); +#157309 = VERTEX_POINT('',#157310); +#157310 = CARTESIAN_POINT('',(118.619233,-108.936634,1.585)); +#157311 = LINE('',#157312,#157313); +#157312 = CARTESIAN_POINT('',(118.629347,-108.946748,1.585)); +#157313 = VECTOR('',#157314,1.); +#157314 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#157315 = ORIENTED_EDGE('',*,*,#157316,.T.); +#157316 = EDGE_CURVE('',#157309,#157317,#157319,.T.); +#157317 = VERTEX_POINT('',#157318); +#157318 = CARTESIAN_POINT('',(118.55175,-108.965412,1.585)); +#157319 = LINE('',#157320,#157321); +#157320 = CARTESIAN_POINT('',(118.619233,-108.936634,1.585)); +#157321 = VECTOR('',#157322,1.); +#157322 = DIRECTION('',(-0.919850708094,-0.39226862584,0.)); +#157323 = ORIENTED_EDGE('',*,*,#157324,.T.); +#157324 = EDGE_CURVE('',#157317,#157325,#157327,.T.); +#157325 = VERTEX_POINT('',#157326); +#157326 = CARTESIAN_POINT('',(118.160121,-108.965412,1.585)); +#157327 = LINE('',#157328,#157329); +#157328 = CARTESIAN_POINT('',(118.55175,-108.965412,1.585)); +#157329 = VECTOR('',#157330,1.); +#157330 = DIRECTION('',(-1.,0.,0.)); +#157331 = ORIENTED_EDGE('',*,*,#157332,.T.); +#157332 = EDGE_CURVE('',#157325,#157333,#157335,.T.); +#157333 = VERTEX_POINT('',#157334); +#157334 = CARTESIAN_POINT('',(118.128605,-108.954617,1.585)); +#157335 = LINE('',#157336,#157337); +#157336 = CARTESIAN_POINT('',(118.160121,-108.965412,1.585)); +#157337 = VECTOR('',#157338,1.); +#157338 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#157339 = ORIENTED_EDGE('',*,*,#157340,.T.); +#157340 = EDGE_CURVE('',#157333,#157341,#157343,.T.); +#157341 = VERTEX_POINT('',#157342); +#157342 = CARTESIAN_POINT('',(117.936439,-108.855849,1.585)); +#157343 = LINE('',#157344,#157345); +#157344 = CARTESIAN_POINT('',(118.128605,-108.954617,1.585)); +#157345 = VECTOR('',#157346,1.); +#157346 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#157347 = ORIENTED_EDGE('',*,*,#157348,.T.); +#157348 = EDGE_CURVE('',#157341,#157349,#157351,.T.); +#157349 = VERTEX_POINT('',#157350); +#157350 = CARTESIAN_POINT('',(117.82343,-108.740831,1.585)); +#157351 = LINE('',#157352,#157353); +#157352 = CARTESIAN_POINT('',(117.936439,-108.855849,1.585)); +#157353 = VECTOR('',#157354,1.); +#157354 = DIRECTION('',(-0.700849715454,0.713308962756,0.)); +#157355 = ORIENTED_EDGE('',*,*,#157356,.T.); +#157356 = EDGE_CURVE('',#157349,#157357,#157359,.T.); +#157357 = VERTEX_POINT('',#157358); +#157358 = CARTESIAN_POINT('',(117.721089,-108.532973,1.585)); +#157359 = LINE('',#157360,#157361); +#157360 = CARTESIAN_POINT('',(117.82343,-108.740831,1.585)); +#157361 = VECTOR('',#157362,1.); +#157362 = DIRECTION('',(-0.441721919769,0.897152019223,0.)); +#157363 = ORIENTED_EDGE('',*,*,#157364,.T.); +#157364 = EDGE_CURVE('',#157357,#157365,#157367,.T.); +#157365 = VERTEX_POINT('',#157366); +#157366 = CARTESIAN_POINT('',(117.71665,-108.499957,1.585)); +#157367 = LINE('',#157368,#157369); +#157368 = CARTESIAN_POINT('',(117.721089,-108.532973,1.585)); +#157369 = VECTOR('',#157370,1.); +#157370 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#157371 = ORIENTED_EDGE('',*,*,#157372,.T.); +#157372 = EDGE_CURVE('',#157365,#157373,#157375,.T.); +#157373 = VERTEX_POINT('',#157374); +#157374 = CARTESIAN_POINT('',(117.719052,-107.961285,1.585)); +#157375 = LINE('',#157376,#157377); +#157376 = CARTESIAN_POINT('',(117.71665,-108.499957,1.585)); +#157377 = VECTOR('',#157378,1.); +#157378 = DIRECTION('',(4.459069935018E-03,0.999990058298,0.)); +#157379 = ORIENTED_EDGE('',*,*,#157380,.T.); +#157380 = EDGE_CURVE('',#157373,#157381,#157383,.T.); +#157381 = VERTEX_POINT('',#157382); +#157382 = CARTESIAN_POINT('',(117.729846,-107.92977,1.585)); +#157383 = LINE('',#157384,#157385); +#157384 = CARTESIAN_POINT('',(117.719052,-107.961285,1.585)); +#157385 = VECTOR('',#157386,1.); +#157386 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#157387 = ORIENTED_EDGE('',*,*,#157388,.T.); +#157388 = EDGE_CURVE('',#157381,#157389,#157391,.T.); +#157389 = VERTEX_POINT('',#157390); +#157390 = CARTESIAN_POINT('',(117.828614,-107.737603,1.585)); +#157391 = LINE('',#157392,#157393); +#157392 = CARTESIAN_POINT('',(117.729846,-107.92977,1.585)); +#157393 = VECTOR('',#157394,1.); +#157394 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#157395 = ORIENTED_EDGE('',*,*,#157396,.T.); +#157396 = EDGE_CURVE('',#157389,#157397,#157399,.T.); +#157397 = VERTEX_POINT('',#157398); +#157398 = CARTESIAN_POINT('',(117.943632,-107.624595,1.585)); +#157399 = LINE('',#157400,#157401); +#157400 = CARTESIAN_POINT('',(117.828614,-107.737603,1.585)); +#157401 = VECTOR('',#157402,1.); +#157402 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#157403 = ORIENTED_EDGE('',*,*,#157404,.T.); +#157404 = EDGE_CURVE('',#157397,#157405,#157407,.T.); +#157405 = VERTEX_POINT('',#157406); +#157406 = CARTESIAN_POINT('',(118.151491,-107.522253,1.585)); +#157407 = LINE('',#157408,#157409); +#157408 = CARTESIAN_POINT('',(117.943632,-107.624595,1.585)); +#157409 = VECTOR('',#157410,1.); +#157410 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#157411 = ORIENTED_EDGE('',*,*,#157412,.T.); +#157412 = EDGE_CURVE('',#157405,#157413,#157415,.T.); +#157413 = VERTEX_POINT('',#157414); +#157414 = CARTESIAN_POINT('',(118.184507,-107.517814,1.585)); +#157415 = LINE('',#157416,#157417); +#157416 = CARTESIAN_POINT('',(118.151491,-107.522253,1.585)); +#157417 = VECTOR('',#157418,1.); +#157418 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157419 = ORIENTED_EDGE('',*,*,#157420,.T.); +#157420 = EDGE_CURVE('',#157413,#157421,#157423,.T.); +#157421 = VERTEX_POINT('',#157422); +#157422 = CARTESIAN_POINT('',(118.55175,-107.520216,1.585)); +#157423 = LINE('',#157424,#157425); +#157424 = CARTESIAN_POINT('',(118.184507,-107.517814,1.585)); +#157425 = VECTOR('',#157426,1.); +#157426 = DIRECTION('',(0.999978610776,-6.540488513295E-03,0.)); +#157427 = ORIENTED_EDGE('',*,*,#157428,.T.); +#157428 = EDGE_CURVE('',#157421,#157429,#157431,.T.); +#157429 = VERTEX_POINT('',#157430); +#157430 = CARTESIAN_POINT('',(118.573793,-107.527385,1.585)); +#157431 = LINE('',#157432,#157433); +#157432 = CARTESIAN_POINT('',(118.55175,-107.520216,1.585)); +#157433 = VECTOR('',#157434,1.); +#157434 = DIRECTION('',(0.950970323812,-0.309282141787,0.)); +#157435 = ORIENTED_EDGE('',*,*,#157436,.T.); +#157436 = EDGE_CURVE('',#157429,#157437,#157439,.T.); +#157437 = VERTEX_POINT('',#157438); +#157438 = CARTESIAN_POINT('',(118.576195,-107.018428,1.585)); +#157439 = LINE('',#157440,#157441); +#157440 = CARTESIAN_POINT('',(118.573793,-107.527385,1.585)); +#157441 = VECTOR('',#157442,1.); +#157442 = DIRECTION('',(4.719403113157E-03,0.999988863555,0.)); +#157443 = ORIENTED_EDGE('',*,*,#157444,.T.); +#157444 = EDGE_CURVE('',#157437,#157445,#157447,.T.); +#157445 = VERTEX_POINT('',#157446); +#157446 = CARTESIAN_POINT('',(118.594859,-106.973368,1.585)); +#157447 = LINE('',#157448,#157449); +#157448 = CARTESIAN_POINT('',(118.576195,-107.018428,1.585)); +#157449 = VECTOR('',#157450,1.); +#157450 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157451 = ORIENTED_EDGE('',*,*,#157452,.T.); +#157452 = EDGE_CURVE('',#157445,#157281,#157453,.T.); +#157453 = LINE('',#157454,#157455); +#157454 = CARTESIAN_POINT('',(118.594859,-106.973368,1.585)); +#157455 = VECTOR('',#157456,1.); +#157456 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157457 = FACE_BOUND('',#157458,.F.); +#157458 = EDGE_LOOP('',(#157459,#157469,#157477,#157486,#157494,#157503, + #157511,#157519)); +#157459 = ORIENTED_EDGE('',*,*,#157460,.T.); +#157460 = EDGE_CURVE('',#157461,#157463,#157465,.T.); +#157461 = VERTEX_POINT('',#157462); +#157462 = CARTESIAN_POINT('',(118.573793,-107.805782,1.585)); +#157463 = VERTEX_POINT('',#157464); +#157464 = CARTESIAN_POINT('',(118.497855,-107.767814,1.585)); +#157465 = LINE('',#157466,#157467); +#157466 = CARTESIAN_POINT('',(118.573793,-107.805782,1.585)); +#157467 = VECTOR('',#157468,1.); +#157468 = DIRECTION('',(-0.89443190233,0.447204172715,0.)); +#157469 = ORIENTED_EDGE('',*,*,#157470,.T.); +#157470 = EDGE_CURVE('',#157463,#157471,#157473,.T.); +#157471 = VERTEX_POINT('',#157472); +#157472 = CARTESIAN_POINT('',(118.214016,-107.767814,1.585)); +#157473 = LINE('',#157474,#157475); +#157474 = CARTESIAN_POINT('',(118.497855,-107.767814,1.585)); +#157475 = VECTOR('',#157476,1.); +#157476 = DIRECTION('',(-1.,0.,0.)); +#157477 = ORIENTED_EDGE('',*,*,#157478,.T.); +#157478 = EDGE_CURVE('',#157471,#157479,#157481,.T.); +#157479 = VERTEX_POINT('',#157480); +#157480 = CARTESIAN_POINT('',(117.96665,-108.015179,1.585)); +#157481 = CIRCLE('',#157482,0.347626269899); +#157482 = AXIS2_PLACEMENT_3D('',#157483,#157484,#157485); +#157483 = CARTESIAN_POINT('',(118.30275806136,-108.1039224201,1.585)); +#157484 = DIRECTION('',(0.,0.,1.)); +#157485 = DIRECTION('',(-0.255280078187,0.966867147896,0.)); +#157486 = ORIENTED_EDGE('',*,*,#157487,.T.); +#157487 = EDGE_CURVE('',#157479,#157488,#157490,.T.); +#157488 = VERTEX_POINT('',#157489); +#157489 = CARTESIAN_POINT('',(117.96665,-108.470449,1.585)); +#157490 = LINE('',#157491,#157492); +#157491 = CARTESIAN_POINT('',(117.96665,-108.015179,1.585)); +#157492 = VECTOR('',#157493,1.); +#157493 = DIRECTION('',(0.,-1.,0.)); +#157494 = ORIENTED_EDGE('',*,*,#157495,.T.); +#157495 = EDGE_CURVE('',#157488,#157496,#157498,.T.); +#157496 = VERTEX_POINT('',#157497); +#157497 = CARTESIAN_POINT('',(118.214016,-108.717814,1.585)); +#157498 = CIRCLE('',#157499,0.347636928416); +#157499 = AXIS2_PLACEMENT_3D('',#157500,#157501,#157502); +#157500 = CARTESIAN_POINT('',(118.30276678242,-108.3816968587,1.585)); +#157501 = DIRECTION('',(0.,0.,1.)); +#157502 = DIRECTION('',(-0.966861558574,-0.25530124667,0.)); +#157503 = ORIENTED_EDGE('',*,*,#157504,.T.); +#157504 = EDGE_CURVE('',#157496,#157505,#157507,.T.); +#157505 = VERTEX_POINT('',#157506); +#157506 = CARTESIAN_POINT('',(118.497855,-108.717814,1.585)); +#157507 = LINE('',#157508,#157509); +#157508 = CARTESIAN_POINT('',(118.214016,-108.717814,1.585)); +#157509 = VECTOR('',#157510,1.); +#157510 = DIRECTION('',(1.,0.,0.)); +#157511 = ORIENTED_EDGE('',*,*,#157512,.T.); +#157512 = EDGE_CURVE('',#157505,#157513,#157515,.T.); +#157513 = VERTEX_POINT('',#157514); +#157514 = CARTESIAN_POINT('',(118.573793,-108.679845,1.585)); +#157515 = LINE('',#157516,#157517); +#157516 = CARTESIAN_POINT('',(118.497855,-108.717814,1.585)); +#157517 = VECTOR('',#157518,1.); +#157518 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#157519 = ORIENTED_EDGE('',*,*,#157520,.T.); +#157520 = EDGE_CURVE('',#157513,#157461,#157521,.T.); +#157521 = LINE('',#157522,#157523); +#157522 = CARTESIAN_POINT('',(118.573793,-108.679845,1.585)); +#157523 = VECTOR('',#157524,1.); +#157524 = DIRECTION('',(0.,1.,0.)); +#157525 = PLANE('',#157526); +#157526 = AXIS2_PLACEMENT_3D('',#157527,#157528,#157529); +#157527 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157528 = DIRECTION('',(0.,0.,1.)); +#157529 = DIRECTION('',(1.,0.,-0.)); +#157530 = SHELL_BASED_SURFACE_MODEL('',(#157531)); +#157531 = OPEN_SHELL('',(#157532)); +#157532 = ADVANCED_FACE('',(#157533),#157585,.T.); +#157533 = FACE_BOUND('',#157534,.F.); +#157534 = EDGE_LOOP('',(#157535,#157546,#157554,#157563,#157571,#157579) + ); +#157535 = ORIENTED_EDGE('',*,*,#157536,.T.); +#157536 = EDGE_CURVE('',#157537,#157539,#157541,.T.); +#157537 = VERTEX_POINT('',#157538); +#157538 = CARTESIAN_POINT('',(122.829346,-107.53888,1.585)); +#157539 = VERTEX_POINT('',#157540); +#157540 = CARTESIAN_POINT('',(123.02139,-107.618428,1.585)); +#157541 = CIRCLE('',#157542,0.124999692383); +#157542 = AXIS2_PLACEMENT_3D('',#157543,#157544,#157545); +#157543 = CARTESIAN_POINT('',(122.898792,-107.642813518,1.585)); +#157544 = DIRECTION('',(0.,0.,-1.)); +#157545 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157546 = ORIENTED_EDGE('',*,*,#157547,.T.); +#157547 = EDGE_CURVE('',#157539,#157548,#157550,.T.); +#157548 = VERTEX_POINT('',#157549); +#157549 = CARTESIAN_POINT('',(123.02139,-108.8672,1.585)); +#157550 = LINE('',#157551,#157552); +#157551 = CARTESIAN_POINT('',(123.02139,-107.618428,1.585)); +#157552 = VECTOR('',#157553,1.); +#157553 = DIRECTION('',(0.,-1.,0.)); +#157554 = ORIENTED_EDGE('',*,*,#157555,.T.); +#157555 = EDGE_CURVE('',#157548,#157556,#157558,.T.); +#157556 = VERTEX_POINT('',#157557); +#157557 = CARTESIAN_POINT('',(122.776194,-108.8672,1.585)); +#157558 = CIRCLE('',#157559,0.1249997864); +#157559 = AXIS2_PLACEMENT_3D('',#157560,#157561,#157562); +#157560 = CARTESIAN_POINT('',(122.898792,-108.842814,1.585)); +#157561 = DIRECTION('',(-0.,0.,-1.)); +#157562 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157563 = ORIENTED_EDGE('',*,*,#157564,.T.); +#157564 = EDGE_CURVE('',#157556,#157565,#157567,.T.); +#157565 = VERTEX_POINT('',#157566); +#157566 = CARTESIAN_POINT('',(122.776194,-107.618428,1.585)); +#157567 = LINE('',#157568,#157569); +#157568 = CARTESIAN_POINT('',(122.776194,-108.8672,1.585)); +#157569 = VECTOR('',#157570,1.); +#157570 = DIRECTION('',(0.,1.,0.)); +#157571 = ORIENTED_EDGE('',*,*,#157572,.T.); +#157572 = EDGE_CURVE('',#157565,#157573,#157575,.T.); +#157573 = VERTEX_POINT('',#157574); +#157574 = CARTESIAN_POINT('',(122.794858,-107.573368,1.585)); +#157575 = LINE('',#157576,#157577); +#157576 = CARTESIAN_POINT('',(122.776194,-107.618428,1.585)); +#157577 = VECTOR('',#157578,1.); +#157578 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157579 = ORIENTED_EDGE('',*,*,#157580,.T.); +#157580 = EDGE_CURVE('',#157573,#157537,#157581,.T.); +#157581 = LINE('',#157582,#157583); +#157582 = CARTESIAN_POINT('',(122.794858,-107.573368,1.585)); +#157583 = VECTOR('',#157584,1.); +#157584 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157585 = PLANE('',#157586); +#157586 = AXIS2_PLACEMENT_3D('',#157587,#157588,#157589); +#157587 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157588 = DIRECTION('',(0.,0.,1.)); +#157589 = DIRECTION('',(1.,0.,-0.)); +#157590 = SHELL_BASED_SURFACE_MODEL('',(#157591)); +#157591 = OPEN_SHELL('',(#157592)); +#157592 = ADVANCED_FACE('',(#157593),#157864,.T.); +#157593 = FACE_BOUND('',#157594,.F.); +#157594 = EDGE_LOOP('',(#157595,#157605,#157613,#157621,#157629,#157637, + #157645,#157653,#157661,#157669,#157678,#157686,#157694,#157703, + #157711,#157719,#157728,#157736,#157744,#157752,#157760,#157768, + #157776,#157784,#157793,#157801,#157810,#157818,#157826,#157834, + #157842,#157850,#157858)); +#157595 = ORIENTED_EDGE('',*,*,#157596,.T.); +#157596 = EDGE_CURVE('',#157597,#157599,#157601,.T.); +#157597 = VERTEX_POINT('',#157598); +#157598 = CARTESIAN_POINT('',(124.557176,-107.616725,1.585)); +#157599 = VERTEX_POINT('',#157600); +#157600 = CARTESIAN_POINT('',(124.75149,-107.522253,1.585)); +#157601 = LINE('',#157602,#157603); +#157602 = CARTESIAN_POINT('',(124.557176,-107.616725,1.585)); +#157603 = VECTOR('',#157604,1.); +#157604 = DIRECTION('',(0.899342728855,0.437244389392,0.)); +#157605 = ORIENTED_EDGE('',*,*,#157606,.T.); +#157606 = EDGE_CURVE('',#157599,#157607,#157609,.T.); +#157607 = VERTEX_POINT('',#157608); +#157608 = CARTESIAN_POINT('',(124.784506,-107.517814,1.585)); +#157609 = LINE('',#157610,#157611); +#157610 = CARTESIAN_POINT('',(124.75149,-107.522253,1.585)); +#157611 = VECTOR('',#157612,1.); +#157612 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157613 = ORIENTED_EDGE('',*,*,#157614,.T.); +#157614 = EDGE_CURVE('',#157607,#157615,#157617,.T.); +#157615 = VERTEX_POINT('',#157616); +#157616 = CARTESIAN_POINT('',(125.066035,-107.520216,1.585)); +#157617 = LINE('',#157618,#157619); +#157618 = CARTESIAN_POINT('',(124.784506,-107.517814,1.585)); +#157619 = VECTOR('',#157620,1.); +#157620 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#157621 = ORIENTED_EDGE('',*,*,#157622,.T.); +#157622 = EDGE_CURVE('',#157615,#157623,#157625,.T.); +#157623 = VERTEX_POINT('',#157624); +#157624 = CARTESIAN_POINT('',(125.09755,-107.53101,1.585)); +#157625 = LINE('',#157626,#157627); +#157626 = CARTESIAN_POINT('',(125.066035,-107.520216,1.585)); +#157627 = VECTOR('',#157628,1.); +#157628 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#157629 = ORIENTED_EDGE('',*,*,#157630,.T.); +#157630 = EDGE_CURVE('',#157623,#157631,#157633,.T.); +#157631 = VERTEX_POINT('',#157632); +#157632 = CARTESIAN_POINT('',(125.289717,-107.629778,1.585)); +#157633 = LINE('',#157634,#157635); +#157634 = CARTESIAN_POINT('',(125.09755,-107.53101,1.585)); +#157635 = VECTOR('',#157636,1.); +#157636 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#157637 = ORIENTED_EDGE('',*,*,#157638,.T.); +#157638 = EDGE_CURVE('',#157631,#157639,#157641,.T.); +#157639 = VERTEX_POINT('',#157640); +#157640 = CARTESIAN_POINT('',(125.322315,-107.668549,1.585)); +#157641 = LINE('',#157642,#157643); +#157642 = CARTESIAN_POINT('',(125.289717,-107.629778,1.585)); +#157643 = VECTOR('',#157644,1.); +#157644 = DIRECTION('',(0.643543426558,-0.765409601543,0.)); +#157645 = ORIENTED_EDGE('',*,*,#157646,.T.); +#157646 = EDGE_CURVE('',#157639,#157647,#157649,.T.); +#157647 = VERTEX_POINT('',#157648); +#157648 = CARTESIAN_POINT('',(125.419353,-107.866941,1.585)); +#157649 = LINE('',#157650,#157651); +#157650 = CARTESIAN_POINT('',(125.322315,-107.668549,1.585)); +#157651 = VECTOR('',#157652,1.); +#157652 = DIRECTION('',(0.439379528383,-0.898301525123,0.)); +#157653 = ORIENTED_EDGE('',*,*,#157654,.T.); +#157654 = EDGE_CURVE('',#157647,#157655,#157657,.T.); +#157655 = VERTEX_POINT('',#157656); +#157656 = CARTESIAN_POINT('',(125.423792,-107.899957,1.585)); +#157657 = LINE('',#157658,#157659); +#157658 = CARTESIAN_POINT('',(125.419353,-107.866941,1.585)); +#157659 = VECTOR('',#157660,1.); +#157660 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#157661 = ORIENTED_EDGE('',*,*,#157662,.T.); +#157662 = EDGE_CURVE('',#157655,#157663,#157665,.T.); +#157663 = VERTEX_POINT('',#157664); +#157664 = CARTESIAN_POINT('',(125.42139,-108.8672,1.585)); +#157665 = LINE('',#157666,#157667); +#157666 = CARTESIAN_POINT('',(125.423792,-107.899957,1.585)); +#157667 = VECTOR('',#157668,1.); +#157668 = DIRECTION('',(-2.483339340224E-03,-0.999996916508,0.)); +#157669 = ORIENTED_EDGE('',*,*,#157670,.T.); +#157670 = EDGE_CURVE('',#157663,#157671,#157673,.T.); +#157671 = VERTEX_POINT('',#157672); +#157672 = CARTESIAN_POINT('',(125.176194,-108.8672,1.585)); +#157673 = CIRCLE('',#157674,0.1249997864); +#157674 = AXIS2_PLACEMENT_3D('',#157675,#157676,#157677); +#157675 = CARTESIAN_POINT('',(125.298792,-108.842814,1.585)); +#157676 = DIRECTION('',(-0.,0.,-1.)); +#157677 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157678 = ORIENTED_EDGE('',*,*,#157679,.T.); +#157679 = EDGE_CURVE('',#157671,#157680,#157682,.T.); +#157680 = VERTEX_POINT('',#157681); +#157681 = CARTESIAN_POINT('',(125.173792,-107.929465,1.585)); +#157682 = LINE('',#157683,#157684); +#157683 = CARTESIAN_POINT('',(125.176194,-108.8672,1.585)); +#157684 = VECTOR('',#157685,1.); +#157685 = DIRECTION('',(-2.561482849613E-03,0.999996719397,0.)); +#157686 = ORIENTED_EDGE('',*,*,#157687,.T.); +#157687 = EDGE_CURVE('',#157680,#157688,#157690,.T.); +#157688 = VERTEX_POINT('',#157689); +#157689 = CARTESIAN_POINT('',(125.119908,-107.821697,1.585)); +#157690 = LINE('',#157691,#157692); +#157691 = CARTESIAN_POINT('',(125.173792,-107.929465,1.585)); +#157692 = VECTOR('',#157693,1.); +#157693 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#157694 = ORIENTED_EDGE('',*,*,#157695,.T.); +#157695 = EDGE_CURVE('',#157688,#157696,#157698,.T.); +#157696 = VERTEX_POINT('',#157697); +#157697 = CARTESIAN_POINT('',(124.706247,-107.821697,1.585)); +#157698 = CIRCLE('',#157699,0.347269293664); +#157699 = AXIS2_PLACEMENT_3D('',#157700,#157701,#157702); +#157700 = CARTESIAN_POINT('',(124.9130775,-108.1006541769,1.585)); +#157701 = DIRECTION('',(0.,0.,1.)); +#157702 = DIRECTION('',(0.595591098245,0.803287771407,-0.)); +#157703 = ORIENTED_EDGE('',*,*,#157704,.T.); +#157704 = EDGE_CURVE('',#157696,#157705,#157707,.T.); +#157705 = VERTEX_POINT('',#157706); +#157706 = CARTESIAN_POINT('',(124.652364,-107.929465,1.585)); +#157707 = LINE('',#157708,#157709); +#157708 = CARTESIAN_POINT('',(124.706247,-107.821697,1.585)); +#157709 = VECTOR('',#157710,1.); +#157710 = DIRECTION('',(-0.447206955813,-0.894430510812,0.)); +#157711 = ORIENTED_EDGE('',*,*,#157712,.T.); +#157712 = EDGE_CURVE('',#157705,#157713,#157715,.T.); +#157713 = VERTEX_POINT('',#157714); +#157714 = CARTESIAN_POINT('',(124.649962,-108.8672,1.585)); +#157715 = LINE('',#157716,#157717); +#157716 = CARTESIAN_POINT('',(124.652364,-107.929465,1.585)); +#157717 = VECTOR('',#157718,1.); +#157718 = DIRECTION('',(-2.561482849628E-03,-0.999996719397,0.)); +#157719 = ORIENTED_EDGE('',*,*,#157720,.T.); +#157720 = EDGE_CURVE('',#157713,#157721,#157723,.T.); +#157721 = VERTEX_POINT('',#157722); +#157722 = CARTESIAN_POINT('',(124.404766,-108.8672,1.585)); +#157723 = CIRCLE('',#157724,0.1249997864); +#157724 = AXIS2_PLACEMENT_3D('',#157725,#157726,#157727); +#157725 = CARTESIAN_POINT('',(124.527364,-108.842814,1.585)); +#157726 = DIRECTION('',(-0.,0.,-1.)); +#157727 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157728 = ORIENTED_EDGE('',*,*,#157729,.T.); +#157729 = EDGE_CURVE('',#157721,#157730,#157732,.T.); +#157730 = VERTEX_POINT('',#157731); +#157731 = CARTESIAN_POINT('',(124.402364,-107.929465,1.585)); +#157732 = LINE('',#157733,#157734); +#157733 = CARTESIAN_POINT('',(124.404766,-108.8672,1.585)); +#157734 = VECTOR('',#157735,1.); +#157735 = DIRECTION('',(-2.561482849613E-03,0.999996719397,0.)); +#157736 = ORIENTED_EDGE('',*,*,#157737,.T.); +#157737 = EDGE_CURVE('',#157730,#157738,#157740,.T.); +#157738 = VERTEX_POINT('',#157739); +#157739 = CARTESIAN_POINT('',(124.348479,-107.821697,1.585)); +#157740 = LINE('',#157741,#157742); +#157741 = CARTESIAN_POINT('',(124.402364,-107.929465,1.585)); +#157742 = VECTOR('',#157743,1.); +#157743 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#157744 = ORIENTED_EDGE('',*,*,#157745,.T.); +#157745 = EDGE_CURVE('',#157738,#157746,#157748,.T.); +#157746 = VERTEX_POINT('',#157747); +#157747 = CARTESIAN_POINT('',(124.240713,-107.767814,1.585)); +#157748 = LINE('',#157749,#157750); +#157749 = CARTESIAN_POINT('',(124.348479,-107.821697,1.585)); +#157750 = VECTOR('',#157751,1.); +#157751 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#157752 = ORIENTED_EDGE('',*,*,#157753,.T.); +#157753 = EDGE_CURVE('',#157746,#157754,#157756,.T.); +#157754 = VERTEX_POINT('',#157755); +#157755 = CARTESIAN_POINT('',(124.042587,-107.767814,1.585)); +#157756 = LINE('',#157757,#157758); +#157757 = CARTESIAN_POINT('',(124.240713,-107.767814,1.585)); +#157758 = VECTOR('',#157759,1.); +#157759 = DIRECTION('',(-1.,0.,0.)); +#157760 = ORIENTED_EDGE('',*,*,#157761,.T.); +#157761 = EDGE_CURVE('',#157754,#157762,#157764,.T.); +#157762 = VERTEX_POINT('',#157763); +#157763 = CARTESIAN_POINT('',(123.915691,-107.831261,1.585)); +#157764 = LINE('',#157765,#157766); +#157765 = CARTESIAN_POINT('',(124.042587,-107.767814,1.585)); +#157766 = VECTOR('',#157767,1.); +#157767 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#157768 = ORIENTED_EDGE('',*,*,#157769,.T.); +#157769 = EDGE_CURVE('',#157762,#157770,#157772,.T.); +#157770 = VERTEX_POINT('',#157771); +#157771 = CARTESIAN_POINT('',(123.880935,-107.866018,1.585)); +#157772 = LINE('',#157773,#157774); +#157773 = CARTESIAN_POINT('',(123.915691,-107.831261,1.585)); +#157774 = VECTOR('',#157775,1.); +#157775 = DIRECTION('',(-0.707096608818,-0.707116953409,0.)); +#157776 = ORIENTED_EDGE('',*,*,#157777,.T.); +#157777 = EDGE_CURVE('',#157770,#157778,#157780,.T.); +#157778 = VERTEX_POINT('',#157779); +#157779 = CARTESIAN_POINT('',(123.878533,-108.8672,1.585)); +#157780 = LINE('',#157781,#157782); +#157781 = CARTESIAN_POINT('',(123.880935,-107.866018,1.585)); +#157782 = VECTOR('',#157783,1.); +#157783 = DIRECTION('',(-2.399157283168E-03,-0.999997122018,0.)); +#157784 = ORIENTED_EDGE('',*,*,#157785,.T.); +#157785 = EDGE_CURVE('',#157778,#157786,#157788,.T.); +#157786 = VERTEX_POINT('',#157787); +#157787 = CARTESIAN_POINT('',(123.633337,-108.8672,1.585)); +#157788 = CIRCLE('',#157789,0.1249997864); +#157789 = AXIS2_PLACEMENT_3D('',#157790,#157791,#157792); +#157790 = CARTESIAN_POINT('',(123.755935,-108.842814,1.585)); +#157791 = DIRECTION('',(-0.,0.,-1.)); +#157792 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157793 = ORIENTED_EDGE('',*,*,#157794,.T.); +#157794 = EDGE_CURVE('',#157786,#157795,#157797,.T.); +#157795 = VERTEX_POINT('',#157796); +#157796 = CARTESIAN_POINT('',(123.633337,-107.618428,1.585)); +#157797 = LINE('',#157798,#157799); +#157798 = CARTESIAN_POINT('',(123.633337,-108.8672,1.585)); +#157799 = VECTOR('',#157800,1.); +#157800 = DIRECTION('',(0.,1.,0.)); +#157801 = ORIENTED_EDGE('',*,*,#157802,.T.); +#157802 = EDGE_CURVE('',#157795,#157803,#157805,.T.); +#157803 = VERTEX_POINT('',#157804); +#157804 = CARTESIAN_POINT('',(123.862029,-107.578583,1.585)); +#157805 = CIRCLE('',#157806,0.124243077393); +#157806 = AXIS2_PLACEMENT_3D('',#157807,#157808,#157809); +#157807 = CARTESIAN_POINT('',(123.75529059367,-107.6421695936,1.585)); +#157808 = DIRECTION('',(0.,0.,-1.)); +#157809 = DIRECTION('',(-0.981572544987,0.191089871338,0.)); +#157810 = ORIENTED_EDGE('',*,*,#157811,.T.); +#157811 = EDGE_CURVE('',#157803,#157812,#157814,.T.); +#157812 = VERTEX_POINT('',#157813); +#157813 = CARTESIAN_POINT('',(123.980062,-107.522253,1.585)); +#157814 = LINE('',#157815,#157816); +#157815 = CARTESIAN_POINT('',(123.862029,-107.578583,1.585)); +#157816 = VECTOR('',#157817,1.); +#157817 = DIRECTION('',(0.902492723737,0.430705100506,0.)); +#157818 = ORIENTED_EDGE('',*,*,#157819,.T.); +#157819 = EDGE_CURVE('',#157812,#157820,#157822,.T.); +#157820 = VERTEX_POINT('',#157821); +#157821 = CARTESIAN_POINT('',(124.013078,-107.517814,1.585)); +#157822 = LINE('',#157823,#157824); +#157823 = CARTESIAN_POINT('',(123.980062,-107.522253,1.585)); +#157824 = VECTOR('',#157825,1.); +#157825 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157826 = ORIENTED_EDGE('',*,*,#157827,.T.); +#157827 = EDGE_CURVE('',#157820,#157828,#157830,.T.); +#157828 = VERTEX_POINT('',#157829); +#157829 = CARTESIAN_POINT('',(124.294607,-107.520216,1.585)); +#157830 = LINE('',#157831,#157832); +#157831 = CARTESIAN_POINT('',(124.013078,-107.517814,1.585)); +#157832 = VECTOR('',#157833,1.); +#157833 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#157834 = ORIENTED_EDGE('',*,*,#157835,.T.); +#157835 = EDGE_CURVE('',#157828,#157836,#157838,.T.); +#157836 = VERTEX_POINT('',#157837); +#157837 = CARTESIAN_POINT('',(124.326123,-107.531011,1.585)); +#157838 = LINE('',#157839,#157840); +#157839 = CARTESIAN_POINT('',(124.294607,-107.520216,1.585)); +#157840 = VECTOR('',#157841,1.); +#157841 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#157842 = ORIENTED_EDGE('',*,*,#157843,.T.); +#157843 = EDGE_CURVE('',#157836,#157844,#157846,.T.); +#157844 = VERTEX_POINT('',#157845); +#157845 = CARTESIAN_POINT('',(124.518288,-107.629779,1.585)); +#157846 = LINE('',#157847,#157848); +#157847 = CARTESIAN_POINT('',(124.326123,-107.531011,1.585)); +#157848 = VECTOR('',#157849,1.); +#157849 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#157850 = ORIENTED_EDGE('',*,*,#157851,.T.); +#157851 = EDGE_CURVE('',#157844,#157852,#157854,.T.); +#157852 = VERTEX_POINT('',#157853); +#157853 = CARTESIAN_POINT('',(124.527363,-107.640242,1.585)); +#157854 = LINE('',#157855,#157856); +#157855 = CARTESIAN_POINT('',(124.518288,-107.629779,1.585)); +#157856 = VECTOR('',#157857,1.); +#157857 = DIRECTION('',(0.655221858268,-0.755436507225,0.)); +#157858 = ORIENTED_EDGE('',*,*,#157859,.T.); +#157859 = EDGE_CURVE('',#157852,#157597,#157860,.T.); +#157860 = LINE('',#157861,#157862); +#157861 = CARTESIAN_POINT('',(124.527363,-107.640242,1.585)); +#157862 = VECTOR('',#157863,1.); +#157863 = DIRECTION('',(0.785133470575,0.619326596703,0.)); +#157864 = PLANE('',#157865); +#157865 = AXIS2_PLACEMENT_3D('',#157866,#157867,#157868); +#157866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157867 = DIRECTION('',(0.,0.,1.)); +#157868 = DIRECTION('',(1.,0.,-0.)); +#157869 = SHELL_BASED_SURFACE_MODEL('',(#157870)); +#157870 = OPEN_SHELL('',(#157871)); +#157871 = ADVANCED_FACE('',(#157872),#157924,.T.); +#157872 = FACE_BOUND('',#157873,.F.); +#157873 = EDGE_LOOP('',(#157874,#157885,#157893,#157902,#157910,#157918) + ); +#157874 = ORIENTED_EDGE('',*,*,#157875,.T.); +#157875 = EDGE_CURVE('',#157876,#157878,#157880,.T.); +#157876 = VERTEX_POINT('',#157877); +#157877 = CARTESIAN_POINT('',(133.029346,-107.53888,1.585)); +#157878 = VERTEX_POINT('',#157879); +#157879 = CARTESIAN_POINT('',(133.22139,-107.618428,1.585)); +#157880 = CIRCLE('',#157881,0.124999692383); +#157881 = AXIS2_PLACEMENT_3D('',#157882,#157883,#157884); +#157882 = CARTESIAN_POINT('',(133.098792,-107.642813518,1.585)); +#157883 = DIRECTION('',(0.,0.,-1.)); +#157884 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157885 = ORIENTED_EDGE('',*,*,#157886,.T.); +#157886 = EDGE_CURVE('',#157878,#157887,#157889,.T.); +#157887 = VERTEX_POINT('',#157888); +#157888 = CARTESIAN_POINT('',(133.22139,-108.8672,1.585)); +#157889 = LINE('',#157890,#157891); +#157890 = CARTESIAN_POINT('',(133.22139,-107.618428,1.585)); +#157891 = VECTOR('',#157892,1.); +#157892 = DIRECTION('',(0.,-1.,0.)); +#157893 = ORIENTED_EDGE('',*,*,#157894,.T.); +#157894 = EDGE_CURVE('',#157887,#157895,#157897,.T.); +#157895 = VERTEX_POINT('',#157896); +#157896 = CARTESIAN_POINT('',(132.976194,-108.8672,1.585)); +#157897 = CIRCLE('',#157898,0.1249997864); +#157898 = AXIS2_PLACEMENT_3D('',#157899,#157900,#157901); +#157899 = CARTESIAN_POINT('',(133.098792,-108.842814,1.585)); +#157900 = DIRECTION('',(-0.,0.,-1.)); +#157901 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157902 = ORIENTED_EDGE('',*,*,#157903,.T.); +#157903 = EDGE_CURVE('',#157895,#157904,#157906,.T.); +#157904 = VERTEX_POINT('',#157905); +#157905 = CARTESIAN_POINT('',(132.976194,-107.618428,1.585)); +#157906 = LINE('',#157907,#157908); +#157907 = CARTESIAN_POINT('',(132.976194,-108.8672,1.585)); +#157908 = VECTOR('',#157909,1.); +#157909 = DIRECTION('',(0.,1.,0.)); +#157910 = ORIENTED_EDGE('',*,*,#157911,.T.); +#157911 = EDGE_CURVE('',#157904,#157912,#157914,.T.); +#157912 = VERTEX_POINT('',#157913); +#157913 = CARTESIAN_POINT('',(132.994858,-107.573368,1.585)); +#157914 = LINE('',#157915,#157916); +#157915 = CARTESIAN_POINT('',(132.976194,-107.618428,1.585)); +#157916 = VECTOR('',#157917,1.); +#157917 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157918 = ORIENTED_EDGE('',*,*,#157919,.T.); +#157919 = EDGE_CURVE('',#157912,#157876,#157920,.T.); +#157920 = LINE('',#157921,#157922); +#157921 = CARTESIAN_POINT('',(132.994858,-107.573368,1.585)); +#157922 = VECTOR('',#157923,1.); +#157923 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#157924 = PLANE('',#157925); +#157925 = AXIS2_PLACEMENT_3D('',#157926,#157927,#157928); +#157926 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157927 = DIRECTION('',(0.,0.,1.)); +#157928 = DIRECTION('',(1.,0.,-0.)); +#157929 = SHELL_BASED_SURFACE_MODEL('',(#157930)); +#157930 = OPEN_SHELL('',(#157931)); +#157931 = ADVANCED_FACE('',(#157932),#158203,.T.); +#157932 = FACE_BOUND('',#157933,.F.); +#157933 = EDGE_LOOP('',(#157934,#157944,#157952,#157960,#157968,#157976, + #157984,#157992,#158000,#158008,#158017,#158025,#158033,#158042, + #158050,#158058,#158067,#158075,#158083,#158091,#158099,#158107, + #158115,#158123,#158132,#158140,#158149,#158157,#158165,#158173, + #158181,#158189,#158197)); +#157934 = ORIENTED_EDGE('',*,*,#157935,.T.); +#157935 = EDGE_CURVE('',#157936,#157938,#157940,.T.); +#157936 = VERTEX_POINT('',#157937); +#157937 = CARTESIAN_POINT('',(134.757176,-107.616725,1.585)); +#157938 = VERTEX_POINT('',#157939); +#157939 = CARTESIAN_POINT('',(134.95149,-107.522253,1.585)); +#157940 = LINE('',#157941,#157942); +#157941 = CARTESIAN_POINT('',(134.757176,-107.616725,1.585)); +#157942 = VECTOR('',#157943,1.); +#157943 = DIRECTION('',(0.899342728855,0.437244389392,0.)); +#157944 = ORIENTED_EDGE('',*,*,#157945,.T.); +#157945 = EDGE_CURVE('',#157938,#157946,#157948,.T.); +#157946 = VERTEX_POINT('',#157947); +#157947 = CARTESIAN_POINT('',(134.984506,-107.517814,1.585)); +#157948 = LINE('',#157949,#157950); +#157949 = CARTESIAN_POINT('',(134.95149,-107.522253,1.585)); +#157950 = VECTOR('',#157951,1.); +#157951 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157952 = ORIENTED_EDGE('',*,*,#157953,.T.); +#157953 = EDGE_CURVE('',#157946,#157954,#157956,.T.); +#157954 = VERTEX_POINT('',#157955); +#157955 = CARTESIAN_POINT('',(135.266035,-107.520216,1.585)); +#157956 = LINE('',#157957,#157958); +#157957 = CARTESIAN_POINT('',(134.984506,-107.517814,1.585)); +#157958 = VECTOR('',#157959,1.); +#157959 = DIRECTION('',(0.99996360464,-8.53167019507E-03,0.)); +#157960 = ORIENTED_EDGE('',*,*,#157961,.T.); +#157961 = EDGE_CURVE('',#157954,#157962,#157964,.T.); +#157962 = VERTEX_POINT('',#157963); +#157963 = CARTESIAN_POINT('',(135.29755,-107.53101,1.585)); +#157964 = LINE('',#157965,#157966); +#157965 = CARTESIAN_POINT('',(135.266035,-107.520216,1.585)); +#157966 = VECTOR('',#157967,1.); +#157967 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#157968 = ORIENTED_EDGE('',*,*,#157969,.T.); +#157969 = EDGE_CURVE('',#157962,#157970,#157972,.T.); +#157970 = VERTEX_POINT('',#157971); +#157971 = CARTESIAN_POINT('',(135.489717,-107.629778,1.585)); +#157972 = LINE('',#157973,#157974); +#157973 = CARTESIAN_POINT('',(135.29755,-107.53101,1.585)); +#157974 = VECTOR('',#157975,1.); +#157975 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#157976 = ORIENTED_EDGE('',*,*,#157977,.T.); +#157977 = EDGE_CURVE('',#157970,#157978,#157980,.T.); +#157978 = VERTEX_POINT('',#157979); +#157979 = CARTESIAN_POINT('',(135.522315,-107.668549,1.585)); +#157980 = LINE('',#157981,#157982); +#157981 = CARTESIAN_POINT('',(135.489717,-107.629778,1.585)); +#157982 = VECTOR('',#157983,1.); +#157983 = DIRECTION('',(0.643543426558,-0.765409601543,0.)); +#157984 = ORIENTED_EDGE('',*,*,#157985,.T.); +#157985 = EDGE_CURVE('',#157978,#157986,#157988,.T.); +#157986 = VERTEX_POINT('',#157987); +#157987 = CARTESIAN_POINT('',(135.619353,-107.866941,1.585)); +#157988 = LINE('',#157989,#157990); +#157989 = CARTESIAN_POINT('',(135.522315,-107.668549,1.585)); +#157990 = VECTOR('',#157991,1.); +#157991 = DIRECTION('',(0.439379528383,-0.898301525123,0.)); +#157992 = ORIENTED_EDGE('',*,*,#157993,.T.); +#157993 = EDGE_CURVE('',#157986,#157994,#157996,.T.); +#157994 = VERTEX_POINT('',#157995); +#157995 = CARTESIAN_POINT('',(135.623792,-107.899957,1.585)); +#157996 = LINE('',#157997,#157998); +#157997 = CARTESIAN_POINT('',(135.619353,-107.866941,1.585)); +#157998 = VECTOR('',#157999,1.); +#157999 = DIRECTION('',(0.133250982623,-0.991082325355,0.)); +#158000 = ORIENTED_EDGE('',*,*,#158001,.T.); +#158001 = EDGE_CURVE('',#157994,#158002,#158004,.T.); +#158002 = VERTEX_POINT('',#158003); +#158003 = CARTESIAN_POINT('',(135.62139,-108.8672,1.585)); +#158004 = LINE('',#158005,#158006); +#158005 = CARTESIAN_POINT('',(135.623792,-107.899957,1.585)); +#158006 = VECTOR('',#158007,1.); +#158007 = DIRECTION('',(-2.483339340238E-03,-0.999996916508,0.)); +#158008 = ORIENTED_EDGE('',*,*,#158009,.T.); +#158009 = EDGE_CURVE('',#158002,#158010,#158012,.T.); +#158010 = VERTEX_POINT('',#158011); +#158011 = CARTESIAN_POINT('',(135.376194,-108.8672,1.585)); +#158012 = CIRCLE('',#158013,0.1249997864); +#158013 = AXIS2_PLACEMENT_3D('',#158014,#158015,#158016); +#158014 = CARTESIAN_POINT('',(135.498792,-108.842814,1.585)); +#158015 = DIRECTION('',(-0.,0.,-1.)); +#158016 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158017 = ORIENTED_EDGE('',*,*,#158018,.T.); +#158018 = EDGE_CURVE('',#158010,#158019,#158021,.T.); +#158019 = VERTEX_POINT('',#158020); +#158020 = CARTESIAN_POINT('',(135.373792,-107.929465,1.585)); +#158021 = LINE('',#158022,#158023); +#158022 = CARTESIAN_POINT('',(135.376194,-108.8672,1.585)); +#158023 = VECTOR('',#158024,1.); +#158024 = DIRECTION('',(-2.561482849613E-03,0.999996719397,0.)); +#158025 = ORIENTED_EDGE('',*,*,#158026,.T.); +#158026 = EDGE_CURVE('',#158019,#158027,#158029,.T.); +#158027 = VERTEX_POINT('',#158028); +#158028 = CARTESIAN_POINT('',(135.319908,-107.821697,1.585)); +#158029 = LINE('',#158030,#158031); +#158030 = CARTESIAN_POINT('',(135.373792,-107.929465,1.585)); +#158031 = VECTOR('',#158032,1.); +#158032 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#158033 = ORIENTED_EDGE('',*,*,#158034,.T.); +#158034 = EDGE_CURVE('',#158027,#158035,#158037,.T.); +#158035 = VERTEX_POINT('',#158036); +#158036 = CARTESIAN_POINT('',(134.906247,-107.821697,1.585)); +#158037 = CIRCLE('',#158038,0.347269293664); +#158038 = AXIS2_PLACEMENT_3D('',#158039,#158040,#158041); +#158039 = CARTESIAN_POINT('',(135.1130775,-108.1006541769,1.585)); +#158040 = DIRECTION('',(0.,0.,1.)); +#158041 = DIRECTION('',(0.595591098245,0.803287771407,-0.)); +#158042 = ORIENTED_EDGE('',*,*,#158043,.T.); +#158043 = EDGE_CURVE('',#158035,#158044,#158046,.T.); +#158044 = VERTEX_POINT('',#158045); +#158045 = CARTESIAN_POINT('',(134.852364,-107.929465,1.585)); +#158046 = LINE('',#158047,#158048); +#158047 = CARTESIAN_POINT('',(134.906247,-107.821697,1.585)); +#158048 = VECTOR('',#158049,1.); +#158049 = DIRECTION('',(-0.447206955814,-0.894430510812,0.)); +#158050 = ORIENTED_EDGE('',*,*,#158051,.T.); +#158051 = EDGE_CURVE('',#158044,#158052,#158054,.T.); +#158052 = VERTEX_POINT('',#158053); +#158053 = CARTESIAN_POINT('',(134.849962,-108.8672,1.585)); +#158054 = LINE('',#158055,#158056); +#158055 = CARTESIAN_POINT('',(134.852364,-107.929465,1.585)); +#158056 = VECTOR('',#158057,1.); +#158057 = DIRECTION('',(-2.561482849613E-03,-0.999996719397,0.)); +#158058 = ORIENTED_EDGE('',*,*,#158059,.T.); +#158059 = EDGE_CURVE('',#158052,#158060,#158062,.T.); +#158060 = VERTEX_POINT('',#158061); +#158061 = CARTESIAN_POINT('',(134.604766,-108.8672,1.585)); +#158062 = CIRCLE('',#158063,0.1249997864); +#158063 = AXIS2_PLACEMENT_3D('',#158064,#158065,#158066); +#158064 = CARTESIAN_POINT('',(134.727364,-108.842814,1.585)); +#158065 = DIRECTION('',(-0.,0.,-1.)); +#158066 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158067 = ORIENTED_EDGE('',*,*,#158068,.T.); +#158068 = EDGE_CURVE('',#158060,#158069,#158071,.T.); +#158069 = VERTEX_POINT('',#158070); +#158070 = CARTESIAN_POINT('',(134.602364,-107.929465,1.585)); +#158071 = LINE('',#158072,#158073); +#158072 = CARTESIAN_POINT('',(134.604766,-108.8672,1.585)); +#158073 = VECTOR('',#158074,1.); +#158074 = DIRECTION('',(-2.561482849643E-03,0.999996719397,0.)); +#158075 = ORIENTED_EDGE('',*,*,#158076,.T.); +#158076 = EDGE_CURVE('',#158069,#158077,#158079,.T.); +#158077 = VERTEX_POINT('',#158078); +#158078 = CARTESIAN_POINT('',(134.548479,-107.821697,1.585)); +#158079 = LINE('',#158080,#158081); +#158080 = CARTESIAN_POINT('',(134.602364,-107.929465,1.585)); +#158081 = VECTOR('',#158082,1.); +#158082 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#158083 = ORIENTED_EDGE('',*,*,#158084,.T.); +#158084 = EDGE_CURVE('',#158077,#158085,#158087,.T.); +#158085 = VERTEX_POINT('',#158086); +#158086 = CARTESIAN_POINT('',(134.440713,-107.767814,1.585)); +#158087 = LINE('',#158088,#158089); +#158088 = CARTESIAN_POINT('',(134.548479,-107.821697,1.585)); +#158089 = VECTOR('',#158090,1.); +#158090 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#158091 = ORIENTED_EDGE('',*,*,#158092,.T.); +#158092 = EDGE_CURVE('',#158085,#158093,#158095,.T.); +#158093 = VERTEX_POINT('',#158094); +#158094 = CARTESIAN_POINT('',(134.242587,-107.767814,1.585)); +#158095 = LINE('',#158096,#158097); +#158096 = CARTESIAN_POINT('',(134.440713,-107.767814,1.585)); +#158097 = VECTOR('',#158098,1.); +#158098 = DIRECTION('',(-1.,0.,0.)); +#158099 = ORIENTED_EDGE('',*,*,#158100,.T.); +#158100 = EDGE_CURVE('',#158093,#158101,#158103,.T.); +#158101 = VERTEX_POINT('',#158102); +#158102 = CARTESIAN_POINT('',(134.115691,-107.831261,1.585)); +#158103 = LINE('',#158104,#158105); +#158104 = CARTESIAN_POINT('',(134.242587,-107.767814,1.585)); +#158105 = VECTOR('',#158106,1.); +#158106 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#158107 = ORIENTED_EDGE('',*,*,#158108,.T.); +#158108 = EDGE_CURVE('',#158101,#158109,#158111,.T.); +#158109 = VERTEX_POINT('',#158110); +#158110 = CARTESIAN_POINT('',(134.080935,-107.866018,1.585)); +#158111 = LINE('',#158112,#158113); +#158112 = CARTESIAN_POINT('',(134.115691,-107.831261,1.585)); +#158113 = VECTOR('',#158114,1.); +#158114 = DIRECTION('',(-0.707096608818,-0.707116953409,0.)); +#158115 = ORIENTED_EDGE('',*,*,#158116,.T.); +#158116 = EDGE_CURVE('',#158109,#158117,#158119,.T.); +#158117 = VERTEX_POINT('',#158118); +#158118 = CARTESIAN_POINT('',(134.078533,-108.8672,1.585)); +#158119 = LINE('',#158120,#158121); +#158120 = CARTESIAN_POINT('',(134.080935,-107.866018,1.585)); +#158121 = VECTOR('',#158122,1.); +#158122 = DIRECTION('',(-2.399157283196E-03,-0.999997122018,0.)); +#158123 = ORIENTED_EDGE('',*,*,#158124,.T.); +#158124 = EDGE_CURVE('',#158117,#158125,#158127,.T.); +#158125 = VERTEX_POINT('',#158126); +#158126 = CARTESIAN_POINT('',(133.833337,-108.8672,1.585)); +#158127 = CIRCLE('',#158128,0.1249997864); +#158128 = AXIS2_PLACEMENT_3D('',#158129,#158130,#158131); +#158129 = CARTESIAN_POINT('',(133.955935,-108.842814,1.585)); +#158130 = DIRECTION('',(-0.,0.,-1.)); +#158131 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158132 = ORIENTED_EDGE('',*,*,#158133,.T.); +#158133 = EDGE_CURVE('',#158125,#158134,#158136,.T.); +#158134 = VERTEX_POINT('',#158135); +#158135 = CARTESIAN_POINT('',(133.833337,-107.618428,1.585)); +#158136 = LINE('',#158137,#158138); +#158137 = CARTESIAN_POINT('',(133.833337,-108.8672,1.585)); +#158138 = VECTOR('',#158139,1.); +#158139 = DIRECTION('',(0.,1.,0.)); +#158140 = ORIENTED_EDGE('',*,*,#158141,.T.); +#158141 = EDGE_CURVE('',#158134,#158142,#158144,.T.); +#158142 = VERTEX_POINT('',#158143); +#158143 = CARTESIAN_POINT('',(134.062029,-107.578583,1.585)); +#158144 = CIRCLE('',#158145,0.124243077393); +#158145 = AXIS2_PLACEMENT_3D('',#158146,#158147,#158148); +#158146 = CARTESIAN_POINT('',(133.95529059367,-107.6421695936,1.585)); +#158147 = DIRECTION('',(0.,0.,-1.)); +#158148 = DIRECTION('',(-0.981572544987,0.191089871338,0.)); +#158149 = ORIENTED_EDGE('',*,*,#158150,.T.); +#158150 = EDGE_CURVE('',#158142,#158151,#158153,.T.); +#158151 = VERTEX_POINT('',#158152); +#158152 = CARTESIAN_POINT('',(134.180062,-107.522253,1.585)); +#158153 = LINE('',#158154,#158155); +#158154 = CARTESIAN_POINT('',(134.062029,-107.578583,1.585)); +#158155 = VECTOR('',#158156,1.); +#158156 = DIRECTION('',(0.902492723737,0.430705100506,0.)); +#158157 = ORIENTED_EDGE('',*,*,#158158,.T.); +#158158 = EDGE_CURVE('',#158151,#158159,#158161,.T.); +#158159 = VERTEX_POINT('',#158160); +#158160 = CARTESIAN_POINT('',(134.213078,-107.517814,1.585)); +#158161 = LINE('',#158162,#158163); +#158162 = CARTESIAN_POINT('',(134.180062,-107.522253,1.585)); +#158163 = VECTOR('',#158164,1.); +#158164 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#158165 = ORIENTED_EDGE('',*,*,#158166,.T.); +#158166 = EDGE_CURVE('',#158159,#158167,#158169,.T.); +#158167 = VERTEX_POINT('',#158168); +#158168 = CARTESIAN_POINT('',(134.494607,-107.520216,1.585)); +#158169 = LINE('',#158170,#158171); +#158170 = CARTESIAN_POINT('',(134.213078,-107.517814,1.585)); +#158171 = VECTOR('',#158172,1.); +#158172 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#158173 = ORIENTED_EDGE('',*,*,#158174,.T.); +#158174 = EDGE_CURVE('',#158167,#158175,#158177,.T.); +#158175 = VERTEX_POINT('',#158176); +#158176 = CARTESIAN_POINT('',(134.526123,-107.531011,1.585)); +#158177 = LINE('',#158178,#158179); +#158178 = CARTESIAN_POINT('',(134.494607,-107.520216,1.585)); +#158179 = VECTOR('',#158180,1.); +#158180 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#158181 = ORIENTED_EDGE('',*,*,#158182,.T.); +#158182 = EDGE_CURVE('',#158175,#158183,#158185,.T.); +#158183 = VERTEX_POINT('',#158184); +#158184 = CARTESIAN_POINT('',(134.718288,-107.629779,1.585)); +#158185 = LINE('',#158186,#158187); +#158186 = CARTESIAN_POINT('',(134.526123,-107.531011,1.585)); +#158187 = VECTOR('',#158188,1.); +#158188 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#158189 = ORIENTED_EDGE('',*,*,#158190,.T.); +#158190 = EDGE_CURVE('',#158183,#158191,#158193,.T.); +#158191 = VERTEX_POINT('',#158192); +#158192 = CARTESIAN_POINT('',(134.727363,-107.640242,1.585)); +#158193 = LINE('',#158194,#158195); +#158194 = CARTESIAN_POINT('',(134.718288,-107.629779,1.585)); +#158195 = VECTOR('',#158196,1.); +#158196 = DIRECTION('',(0.655221858268,-0.755436507225,0.)); +#158197 = ORIENTED_EDGE('',*,*,#158198,.T.); +#158198 = EDGE_CURVE('',#158191,#157936,#158199,.T.); +#158199 = LINE('',#158200,#158201); +#158200 = CARTESIAN_POINT('',(134.727363,-107.640242,1.585)); +#158201 = VECTOR('',#158202,1.); +#158202 = DIRECTION('',(0.785133470574,0.619326596703,0.)); +#158203 = PLANE('',#158204); +#158204 = AXIS2_PLACEMENT_3D('',#158205,#158206,#158207); +#158205 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158206 = DIRECTION('',(0.,0.,1.)); +#158207 = DIRECTION('',(1.,0.,-0.)); +#158208 = SHELL_BASED_SURFACE_MODEL('',(#158209)); +#158209 = OPEN_SHELL('',(#158210)); +#158210 = ADVANCED_FACE('',(#158211),#158280,.T.); +#158211 = FACE_BOUND('',#158212,.F.); +#158212 = EDGE_LOOP('',(#158213,#158224,#158232,#158241,#158249,#158257, + #158266,#158274)); +#158213 = ORIENTED_EDGE('',*,*,#158214,.T.); +#158214 = EDGE_CURVE('',#158215,#158217,#158219,.T.); +#158215 = VERTEX_POINT('',#158216); +#158216 = CARTESIAN_POINT('',(141.988691,-107.165412,1.585)); +#158217 = VERTEX_POINT('',#158218); +#158218 = CARTESIAN_POINT('',(141.988691,-106.920216,1.585)); +#158219 = CIRCLE('',#158220,0.1249997864); +#158220 = AXIS2_PLACEMENT_3D('',#158221,#158222,#158223); +#158221 = CARTESIAN_POINT('',(142.013077,-107.042814,1.585)); +#158222 = DIRECTION('',(0.,0.,-1.)); +#158223 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#158224 = ORIENTED_EDGE('',*,*,#158225,.T.); +#158225 = EDGE_CURVE('',#158217,#158226,#158228,.T.); +#158226 = VERTEX_POINT('',#158227); +#158227 = CARTESIAN_POINT('',(143.066035,-106.920216,1.585)); +#158228 = LINE('',#158229,#158230); +#158229 = CARTESIAN_POINT('',(141.988691,-106.920216,1.585)); +#158230 = VECTOR('',#158231,1.); +#158231 = DIRECTION('',(1.,0.,0.)); +#158232 = ORIENTED_EDGE('',*,*,#158233,.T.); +#158233 = EDGE_CURVE('',#158226,#158234,#158236,.T.); +#158234 = VERTEX_POINT('',#158235); +#158235 = CARTESIAN_POINT('',(143.066035,-107.165412,1.585)); +#158236 = CIRCLE('',#158237,0.1249997864); +#158237 = AXIS2_PLACEMENT_3D('',#158238,#158239,#158240); +#158238 = CARTESIAN_POINT('',(143.041649,-107.042814,1.585)); +#158239 = DIRECTION('',(0.,0.,-1.)); +#158240 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#158241 = ORIENTED_EDGE('',*,*,#158242,.T.); +#158242 = EDGE_CURVE('',#158234,#158243,#158245,.T.); +#158243 = VERTEX_POINT('',#158244); +#158244 = CARTESIAN_POINT('',(142.652363,-107.167814,1.585)); +#158245 = LINE('',#158246,#158247); +#158246 = CARTESIAN_POINT('',(143.066035,-107.165412,1.585)); +#158247 = VECTOR('',#158248,1.); +#158248 = DIRECTION('',(-0.999983142515,-5.806434828379E-03,0.)); +#158249 = ORIENTED_EDGE('',*,*,#158250,.T.); +#158250 = EDGE_CURVE('',#158243,#158251,#158253,.T.); +#158251 = VERTEX_POINT('',#158252); +#158252 = CARTESIAN_POINT('',(142.649961,-108.8672,1.585)); +#158253 = LINE('',#158254,#158255); +#158254 = CARTESIAN_POINT('',(142.652363,-107.167814,1.585)); +#158255 = VECTOR('',#158256,1.); +#158256 = DIRECTION('',(-1.413450270044E-03,-0.999999001079,0.)); +#158257 = ORIENTED_EDGE('',*,*,#158258,.T.); +#158258 = EDGE_CURVE('',#158251,#158259,#158261,.T.); +#158259 = VERTEX_POINT('',#158260); +#158260 = CARTESIAN_POINT('',(142.404765,-108.8672,1.585)); +#158261 = CIRCLE('',#158262,0.1249997864); +#158262 = AXIS2_PLACEMENT_3D('',#158263,#158264,#158265); +#158263 = CARTESIAN_POINT('',(142.527363,-108.842814,1.585)); +#158264 = DIRECTION('',(-0.,0.,-1.)); +#158265 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158266 = ORIENTED_EDGE('',*,*,#158267,.T.); +#158267 = EDGE_CURVE('',#158259,#158268,#158270,.T.); +#158268 = VERTEX_POINT('',#158269); +#158269 = CARTESIAN_POINT('',(142.402363,-107.167814,1.585)); +#158270 = LINE('',#158271,#158272); +#158271 = CARTESIAN_POINT('',(142.404765,-108.8672,1.585)); +#158272 = VECTOR('',#158273,1.); +#158273 = DIRECTION('',(-1.413450270027E-03,0.999999001079,0.)); +#158274 = ORIENTED_EDGE('',*,*,#158275,.T.); +#158275 = EDGE_CURVE('',#158268,#158215,#158276,.T.); +#158276 = LINE('',#158277,#158278); +#158277 = CARTESIAN_POINT('',(142.402363,-107.167814,1.585)); +#158278 = VECTOR('',#158279,1.); +#158279 = DIRECTION('',(-0.999983142515,5.806434828378E-03,0.)); +#158280 = PLANE('',#158281); +#158281 = AXIS2_PLACEMENT_3D('',#158282,#158283,#158284); +#158282 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158283 = DIRECTION('',(0.,0.,1.)); +#158284 = DIRECTION('',(1.,0.,-0.)); +#158285 = SHELL_BASED_SURFACE_MODEL('',(#158286)); +#158286 = OPEN_SHELL('',(#158287)); +#158287 = ADVANCED_FACE('',(#158288),#158494,.T.); +#158288 = FACE_BOUND('',#158289,.F.); +#158289 = EDGE_LOOP('',(#158290,#158300,#158308,#158316,#158324,#158332, + #158340,#158348,#158356,#158364,#158372,#158380,#158388,#158396, + #158405,#158413,#158422,#158430,#158438,#158446,#158455,#158463, + #158471,#158479,#158488)); +#158290 = ORIENTED_EDGE('',*,*,#158291,.T.); +#158291 = EDGE_CURVE('',#158292,#158294,#158296,.T.); +#158292 = VERTEX_POINT('',#158293); +#158293 = CARTESIAN_POINT('',(145.372203,-107.024595,1.585)); +#158294 = VERTEX_POINT('',#158295); +#158295 = CARTESIAN_POINT('',(145.580062,-106.922253,1.585)); +#158296 = LINE('',#158297,#158298); +#158297 = CARTESIAN_POINT('',(145.372203,-107.024595,1.585)); +#158298 = VECTOR('',#158299,1.); +#158299 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#158300 = ORIENTED_EDGE('',*,*,#158301,.T.); +#158301 = EDGE_CURVE('',#158294,#158302,#158304,.T.); +#158302 = VERTEX_POINT('',#158303); +#158303 = CARTESIAN_POINT('',(145.613078,-106.917814,1.585)); +#158304 = LINE('',#158305,#158306); +#158305 = CARTESIAN_POINT('',(145.580062,-106.922253,1.585)); +#158306 = VECTOR('',#158307,1.); +#158307 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#158308 = ORIENTED_EDGE('',*,*,#158309,.T.); +#158309 = EDGE_CURVE('',#158302,#158310,#158312,.T.); +#158310 = VERTEX_POINT('',#158311); +#158311 = CARTESIAN_POINT('',(146.066035,-106.920216,1.585)); +#158312 = LINE('',#158313,#158314); +#158313 = CARTESIAN_POINT('',(145.613078,-106.917814,1.585)); +#158314 = VECTOR('',#158315,1.); +#158315 = DIRECTION('',(0.999985939755,-5.302857064313E-03,0.)); +#158316 = ORIENTED_EDGE('',*,*,#158317,.T.); +#158317 = EDGE_CURVE('',#158310,#158318,#158320,.T.); +#158318 = VERTEX_POINT('',#158319); +#158319 = CARTESIAN_POINT('',(146.09755,-106.93101,1.585)); +#158320 = LINE('',#158321,#158322); +#158321 = CARTESIAN_POINT('',(146.066035,-106.920216,1.585)); +#158322 = VECTOR('',#158323,1.); +#158323 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#158324 = ORIENTED_EDGE('',*,*,#158325,.T.); +#158325 = EDGE_CURVE('',#158318,#158326,#158328,.T.); +#158326 = VERTEX_POINT('',#158327); +#158327 = CARTESIAN_POINT('',(146.289717,-107.029778,1.585)); +#158328 = LINE('',#158329,#158330); +#158329 = CARTESIAN_POINT('',(146.09755,-106.93101,1.585)); +#158330 = VECTOR('',#158331,1.); +#158331 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#158332 = ORIENTED_EDGE('',*,*,#158333,.T.); +#158333 = EDGE_CURVE('',#158326,#158334,#158336,.T.); +#158334 = VERTEX_POINT('',#158335); +#158335 = CARTESIAN_POINT('',(146.402725,-107.144796,1.585)); +#158336 = LINE('',#158337,#158338); +#158337 = CARTESIAN_POINT('',(146.289717,-107.029778,1.585)); +#158338 = VECTOR('',#158339,1.); +#158339 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#158340 = ORIENTED_EDGE('',*,*,#158341,.T.); +#158341 = EDGE_CURVE('',#158334,#158342,#158344,.T.); +#158342 = VERTEX_POINT('',#158343); +#158343 = CARTESIAN_POINT('',(146.505067,-107.352655,1.585)); +#158344 = LINE('',#158345,#158346); +#158345 = CARTESIAN_POINT('',(146.402725,-107.144796,1.585)); +#158346 = VECTOR('',#158347,1.); +#158347 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#158348 = ORIENTED_EDGE('',*,*,#158349,.T.); +#158349 = EDGE_CURVE('',#158342,#158350,#158352,.T.); +#158350 = VERTEX_POINT('',#158351); +#158351 = CARTESIAN_POINT('',(146.509506,-107.385671,1.585)); +#158352 = LINE('',#158353,#158354); +#158353 = CARTESIAN_POINT('',(146.505067,-107.352655,1.585)); +#158354 = VECTOR('',#158355,1.); +#158355 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#158356 = ORIENTED_EDGE('',*,*,#158357,.T.); +#158357 = EDGE_CURVE('',#158350,#158358,#158360,.T.); +#158358 = VERTEX_POINT('',#158359); +#158359 = CARTESIAN_POINT('',(146.507104,-107.581486,1.585)); +#158360 = LINE('',#158361,#158362); +#158361 = CARTESIAN_POINT('',(146.509506,-107.385671,1.585)); +#158362 = VECTOR('',#158363,1.); +#158363 = DIRECTION('',(-1.226575749649E-02,-0.999924772767,0.)); +#158364 = ORIENTED_EDGE('',*,*,#158365,.T.); +#158365 = EDGE_CURVE('',#158358,#158366,#158368,.T.); +#158366 = VERTEX_POINT('',#158367); +#158367 = CARTESIAN_POINT('',(146.407387,-107.876145,1.585)); +#158368 = LINE('',#158369,#158370); +#158369 = CARTESIAN_POINT('',(146.507104,-107.581486,1.585)); +#158370 = VECTOR('',#158371,1.); +#158371 = DIRECTION('',(-0.320556548827,-0.947229380353,0.)); +#158372 = ORIENTED_EDGE('',*,*,#158373,.T.); +#158373 = EDGE_CURVE('',#158366,#158374,#158376,.T.); +#158374 = VERTEX_POINT('',#158375); +#158375 = CARTESIAN_POINT('',(146.38718,-107.902631,1.585)); +#158376 = LINE('',#158377,#158378); +#158377 = CARTESIAN_POINT('',(146.407387,-107.876145,1.585)); +#158378 = VECTOR('',#158379,1.); +#158379 = DIRECTION('',(-0.606559497005,-0.795038097574,0.)); +#158380 = ORIENTED_EDGE('',*,*,#158381,.T.); +#158381 = EDGE_CURVE('',#158374,#158382,#158384,.T.); +#158382 = VERTEX_POINT('',#158383); +#158383 = CARTESIAN_POINT('',(145.571996,-108.717814,1.585)); +#158384 = LINE('',#158385,#158386); +#158385 = CARTESIAN_POINT('',(146.38718,-107.902631,1.585)); +#158386 = VECTOR('',#158387,1.); +#158387 = DIRECTION('',(-0.707107214897,-0.707106347476,0.)); +#158388 = ORIENTED_EDGE('',*,*,#158389,.T.); +#158389 = EDGE_CURVE('',#158382,#158390,#158392,.T.); +#158390 = VERTEX_POINT('',#158391); +#158391 = CARTESIAN_POINT('',(146.408892,-108.720216,1.585)); +#158392 = LINE('',#158393,#158394); +#158393 = CARTESIAN_POINT('',(145.571996,-108.717814,1.585)); +#158394 = VECTOR('',#158395,1.); +#158395 = DIRECTION('',(0.999995881203,-2.870117800348E-03,0.)); +#158396 = ORIENTED_EDGE('',*,*,#158397,.T.); +#158397 = EDGE_CURVE('',#158390,#158398,#158400,.T.); +#158398 = VERTEX_POINT('',#158399); +#158399 = CARTESIAN_POINT('',(146.408892,-108.965412,1.585)); +#158400 = CIRCLE('',#158401,0.1249997864); +#158401 = AXIS2_PLACEMENT_3D('',#158402,#158403,#158404); +#158402 = CARTESIAN_POINT('',(146.384506,-108.842814,1.585)); +#158403 = DIRECTION('',(0.,0.,-1.)); +#158404 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#158405 = ORIENTED_EDGE('',*,*,#158406,.T.); +#158406 = EDGE_CURVE('',#158398,#158407,#158409,.T.); +#158407 = VERTEX_POINT('',#158408); +#158408 = CARTESIAN_POINT('',(145.245833,-108.965412,1.585)); +#158409 = LINE('',#158410,#158411); +#158410 = CARTESIAN_POINT('',(146.408892,-108.965412,1.585)); +#158411 = VECTOR('',#158412,1.); +#158412 = DIRECTION('',(-1.,0.,0.)); +#158413 = ORIENTED_EDGE('',*,*,#158414,.T.); +#158414 = EDGE_CURVE('',#158407,#158415,#158417,.T.); +#158415 = VERTEX_POINT('',#158416); +#158416 = CARTESIAN_POINT('',(145.166291,-108.773362,1.585)); +#158417 = CIRCLE('',#158418,0.124999123629); +#158418 = AXIS2_PLACEMENT_3D('',#158419,#158420,#158421); +#158419 = CARTESIAN_POINT('',(145.27021932933,-108.8428147412,1.585)); +#158420 = DIRECTION('',(0.,0.,-1.)); +#158421 = DIRECTION('',(-0.195092002484,-0.980784946136,-0.)); +#158422 = ORIENTED_EDGE('',*,*,#158423,.T.); +#158423 = EDGE_CURVE('',#158415,#158424,#158426,.T.); +#158424 = VERTEX_POINT('',#158425); +#158425 = CARTESIAN_POINT('',(146.189538,-107.746718,1.585)); +#158426 = LINE('',#158427,#158428); +#158427 = CARTESIAN_POINT('',(145.166291,-108.773362,1.585)); +#158428 = VECTOR('',#158429,1.); +#158429 = DIRECTION('',(0.705934021894,0.708277598638,0.)); +#158430 = ORIENTED_EDGE('',*,*,#158431,.T.); +#158431 = EDGE_CURVE('',#158424,#158432,#158434,.T.); +#158432 = VERTEX_POINT('',#158433); +#158433 = CARTESIAN_POINT('',(146.259506,-107.536814,1.585)); +#158434 = LINE('',#158435,#158436); +#158435 = CARTESIAN_POINT('',(146.189538,-107.746718,1.585)); +#158436 = VECTOR('',#158437,1.); +#158437 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#158438 = ORIENTED_EDGE('',*,*,#158439,.T.); +#158439 = EDGE_CURVE('',#158432,#158440,#158442,.T.); +#158440 = VERTEX_POINT('',#158441); +#158441 = CARTESIAN_POINT('',(146.259506,-107.415179,1.585)); +#158442 = LINE('',#158443,#158444); +#158443 = CARTESIAN_POINT('',(146.259506,-107.536814,1.585)); +#158444 = VECTOR('',#158445,1.); +#158445 = DIRECTION('',(0.,1.,0.)); +#158446 = ORIENTED_EDGE('',*,*,#158447,.T.); +#158447 = EDGE_CURVE('',#158440,#158448,#158450,.T.); +#158448 = VERTEX_POINT('',#158449); +#158449 = CARTESIAN_POINT('',(146.01214,-107.167814,1.585)); +#158450 = CIRCLE('',#158451,0.347631916063); +#158451 = AXIS2_PLACEMENT_3D('',#158452,#158453,#158454); +#158452 = CARTESIAN_POINT('',(145.92339331879,-107.5039270399,1.585)); +#158453 = DIRECTION('',(0.,0.,1.)); +#158454 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#158455 = ORIENTED_EDGE('',*,*,#158456,.T.); +#158456 = EDGE_CURVE('',#158448,#158457,#158459,.T.); +#158457 = VERTEX_POINT('',#158458); +#158458 = CARTESIAN_POINT('',(145.642587,-107.167814,1.585)); +#158459 = LINE('',#158460,#158461); +#158460 = CARTESIAN_POINT('',(146.01214,-107.167814,1.585)); +#158461 = VECTOR('',#158462,1.); +#158462 = DIRECTION('',(-1.,0.,0.)); +#158463 = ORIENTED_EDGE('',*,*,#158464,.T.); +#158464 = EDGE_CURVE('',#158457,#158465,#158467,.T.); +#158465 = VERTEX_POINT('',#158466); +#158466 = CARTESIAN_POINT('',(145.515691,-107.231261,1.585)); +#158467 = LINE('',#158468,#158469); +#158468 = CARTESIAN_POINT('',(145.642587,-107.167814,1.585)); +#158469 = VECTOR('',#158470,1.); +#158470 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#158471 = ORIENTED_EDGE('',*,*,#158472,.T.); +#158472 = EDGE_CURVE('',#158465,#158473,#158475,.T.); +#158473 = VERTEX_POINT('',#158474); +#158474 = CARTESIAN_POINT('',(145.425381,-107.318175,1.585)); +#158475 = LINE('',#158476,#158477); +#158476 = CARTESIAN_POINT('',(145.515691,-107.231261,1.585)); +#158477 = VECTOR('',#158478,1.); +#158478 = DIRECTION('',(-0.7205242235,-0.693429768146,0.)); +#158479 = ORIENTED_EDGE('',*,*,#158480,.T.); +#158480 = EDGE_CURVE('',#158473,#158481,#158483,.T.); +#158481 = VERTEX_POINT('',#158482); +#158482 = CARTESIAN_POINT('',(145.252002,-107.144796,1.585)); +#158483 = CIRCLE('',#158484,0.124999261618); +#158484 = AXIS2_PLACEMENT_3D('',#158485,#158486,#158487); +#158485 = CARTESIAN_POINT('',(145.355935,-107.214242,1.585)); +#158486 = DIRECTION('',(0.,0.,-1.)); +#158487 = DIRECTION('',(0.555571281791,-0.831468911535,0.)); +#158488 = ORIENTED_EDGE('',*,*,#158489,.T.); +#158489 = EDGE_CURVE('',#158481,#158292,#158490,.T.); +#158490 = LINE('',#158491,#158492); +#158491 = CARTESIAN_POINT('',(145.252002,-107.144796,1.585)); +#158492 = VECTOR('',#158493,1.); +#158493 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158494 = PLANE('',#158495); +#158495 = AXIS2_PLACEMENT_3D('',#158496,#158497,#158498); +#158496 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158497 = DIRECTION('',(0.,0.,1.)); +#158498 = DIRECTION('',(1.,0.,-0.)); +#158499 = SHELL_BASED_SURFACE_MODEL('',(#158500)); +#158500 = OPEN_SHELL('',(#158501)); +#158501 = ADVANCED_FACE('',(#158502,#158642),#158694,.T.); +#158502 = FACE_BOUND('',#158503,.F.); +#158503 = EDGE_LOOP('',(#158504,#158515,#158523,#158531,#158539,#158547, + #158555,#158563,#158571,#158579,#158587,#158595,#158603,#158611, + #158619,#158627,#158636)); +#158504 = ORIENTED_EDGE('',*,*,#158505,.T.); +#158505 = EDGE_CURVE('',#158506,#158508,#158510,.T.); +#158506 = VERTEX_POINT('',#158507); +#158507 = CARTESIAN_POINT('',(150.204766,-107.018428,1.585)); +#158508 = VERTEX_POINT('',#158509); +#158509 = CARTESIAN_POINT('',(150.302978,-106.920216,1.585)); +#158510 = CIRCLE('',#158511,0.124998078635); +#158511 = AXIS2_PLACEMENT_3D('',#158512,#158513,#158514); +#158512 = CARTESIAN_POINT('',(150.32736254765,-107.0428125476,1.585)); +#158513 = DIRECTION('',(0.,0.,-1.)); +#158514 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#158515 = ORIENTED_EDGE('',*,*,#158516,.T.); +#158516 = EDGE_CURVE('',#158508,#158517,#158519,.T.); +#158517 = VERTEX_POINT('',#158518); +#158518 = CARTESIAN_POINT('',(151.037464,-106.920216,1.585)); +#158519 = LINE('',#158520,#158521); +#158520 = CARTESIAN_POINT('',(150.302978,-106.920216,1.585)); +#158521 = VECTOR('',#158522,1.); +#158522 = DIRECTION('',(1.,0.,0.)); +#158523 = ORIENTED_EDGE('',*,*,#158524,.T.); +#158524 = EDGE_CURVE('',#158517,#158525,#158527,.T.); +#158525 = VERTEX_POINT('',#158526); +#158526 = CARTESIAN_POINT('',(151.068979,-106.93101,1.585)); +#158527 = LINE('',#158528,#158529); +#158528 = CARTESIAN_POINT('',(151.037464,-106.920216,1.585)); +#158529 = VECTOR('',#158530,1.); +#158530 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#158531 = ORIENTED_EDGE('',*,*,#158532,.T.); +#158532 = EDGE_CURVE('',#158525,#158533,#158535,.T.); +#158533 = VERTEX_POINT('',#158534); +#158534 = CARTESIAN_POINT('',(151.261146,-107.029778,1.585)); +#158535 = LINE('',#158536,#158537); +#158536 = CARTESIAN_POINT('',(151.068979,-106.93101,1.585)); +#158537 = VECTOR('',#158538,1.); +#158538 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#158539 = ORIENTED_EDGE('',*,*,#158540,.T.); +#158540 = EDGE_CURVE('',#158533,#158541,#158543,.T.); +#158541 = VERTEX_POINT('',#158542); +#158542 = CARTESIAN_POINT('',(151.374154,-107.144796,1.585)); +#158543 = LINE('',#158544,#158545); +#158544 = CARTESIAN_POINT('',(151.261146,-107.029778,1.585)); +#158545 = VECTOR('',#158546,1.); +#158546 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#158547 = ORIENTED_EDGE('',*,*,#158548,.T.); +#158548 = EDGE_CURVE('',#158541,#158549,#158551,.T.); +#158549 = VERTEX_POINT('',#158550); +#158550 = CARTESIAN_POINT('',(151.476496,-107.352655,1.585)); +#158551 = LINE('',#158552,#158553); +#158552 = CARTESIAN_POINT('',(151.374154,-107.144796,1.585)); +#158553 = VECTOR('',#158554,1.); +#158554 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#158555 = ORIENTED_EDGE('',*,*,#158556,.T.); +#158556 = EDGE_CURVE('',#158549,#158557,#158559,.T.); +#158557 = VERTEX_POINT('',#158558); +#158558 = CARTESIAN_POINT('',(151.480935,-107.385671,1.585)); +#158559 = LINE('',#158560,#158561); +#158560 = CARTESIAN_POINT('',(151.476496,-107.352655,1.585)); +#158561 = VECTOR('',#158562,1.); +#158562 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#158563 = ORIENTED_EDGE('',*,*,#158564,.T.); +#158564 = EDGE_CURVE('',#158557,#158565,#158567,.T.); +#158565 = VERTEX_POINT('',#158566); +#158566 = CARTESIAN_POINT('',(151.478533,-107.6672,1.585)); +#158567 = LINE('',#158568,#158569); +#158568 = CARTESIAN_POINT('',(151.480935,-107.385671,1.585)); +#158569 = VECTOR('',#158570,1.); +#158570 = DIRECTION('',(-8.531670195019E-03,-0.99996360464,0.)); +#158571 = ORIENTED_EDGE('',*,*,#158572,.T.); +#158572 = EDGE_CURVE('',#158565,#158573,#158575,.T.); +#158573 = VERTEX_POINT('',#158574); +#158574 = CARTESIAN_POINT('',(151.467738,-107.698716,1.585)); +#158575 = LINE('',#158576,#158577); +#158576 = CARTESIAN_POINT('',(151.478533,-107.6672,1.585)); +#158577 = VECTOR('',#158578,1.); +#158578 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#158579 = ORIENTED_EDGE('',*,*,#158580,.T.); +#158580 = EDGE_CURVE('',#158573,#158581,#158583,.T.); +#158581 = VERTEX_POINT('',#158582); +#158582 = CARTESIAN_POINT('',(151.36897,-107.890881,1.585)); +#158583 = LINE('',#158584,#158585); +#158584 = CARTESIAN_POINT('',(151.467738,-107.698716,1.585)); +#158585 = VECTOR('',#158586,1.); +#158586 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#158587 = ORIENTED_EDGE('',*,*,#158588,.T.); +#158588 = EDGE_CURVE('',#158581,#158589,#158591,.T.); +#158589 = VERTEX_POINT('',#158590); +#158590 = CARTESIAN_POINT('',(151.253954,-108.00389,1.585)); +#158591 = LINE('',#158592,#158593); +#158592 = CARTESIAN_POINT('',(151.36897,-107.890881,1.585)); +#158593 = VECTOR('',#158594,1.); +#158594 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#158595 = ORIENTED_EDGE('',*,*,#158596,.T.); +#158596 = EDGE_CURVE('',#158589,#158597,#158599,.T.); +#158597 = VERTEX_POINT('',#158598); +#158598 = CARTESIAN_POINT('',(151.046094,-108.106232,1.585)); +#158599 = LINE('',#158600,#158601); +#158600 = CARTESIAN_POINT('',(151.253954,-108.00389,1.585)); +#158601 = VECTOR('',#158602,1.); +#158602 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#158603 = ORIENTED_EDGE('',*,*,#158604,.T.); +#158604 = EDGE_CURVE('',#158597,#158605,#158607,.T.); +#158605 = VERTEX_POINT('',#158606); +#158606 = CARTESIAN_POINT('',(151.013078,-108.110671,1.585)); +#158607 = LINE('',#158608,#158609); +#158608 = CARTESIAN_POINT('',(151.046094,-108.106232,1.585)); +#158609 = VECTOR('',#158610,1.); +#158610 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#158611 = ORIENTED_EDGE('',*,*,#158612,.T.); +#158612 = EDGE_CURVE('',#158605,#158613,#158615,.T.); +#158613 = VERTEX_POINT('',#158614); +#158614 = CARTESIAN_POINT('',(150.452364,-108.110671,1.585)); +#158615 = LINE('',#158616,#158617); +#158616 = CARTESIAN_POINT('',(151.013078,-108.110671,1.585)); +#158617 = VECTOR('',#158618,1.); +#158618 = DIRECTION('',(-1.,0.,0.)); +#158619 = ORIENTED_EDGE('',*,*,#158620,.T.); +#158620 = EDGE_CURVE('',#158613,#158621,#158623,.T.); +#158621 = VERTEX_POINT('',#158622); +#158622 = CARTESIAN_POINT('',(150.449962,-108.8672,1.585)); +#158623 = LINE('',#158624,#158625); +#158624 = CARTESIAN_POINT('',(150.452364,-108.110671,1.585)); +#158625 = VECTOR('',#158626,1.); +#158626 = DIRECTION('',(-3.175010995011E-03,-0.99999495964,0.)); +#158627 = ORIENTED_EDGE('',*,*,#158628,.T.); +#158628 = EDGE_CURVE('',#158621,#158629,#158631,.T.); +#158629 = VERTEX_POINT('',#158630); +#158630 = CARTESIAN_POINT('',(150.204766,-108.8672,1.585)); +#158631 = CIRCLE('',#158632,0.1249997864); +#158632 = AXIS2_PLACEMENT_3D('',#158633,#158634,#158635); +#158633 = CARTESIAN_POINT('',(150.327364,-108.842814,1.585)); +#158634 = DIRECTION('',(-0.,0.,-1.)); +#158635 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158636 = ORIENTED_EDGE('',*,*,#158637,.T.); +#158637 = EDGE_CURVE('',#158629,#158506,#158638,.T.); +#158638 = LINE('',#158639,#158640); +#158639 = CARTESIAN_POINT('',(150.204766,-108.8672,1.585)); +#158640 = VECTOR('',#158641,1.); +#158641 = DIRECTION('',(0.,1.,0.)); +#158642 = FACE_BOUND('',#158643,.F.); +#158643 = EDGE_LOOP('',(#158644,#158655,#158663,#158671,#158679,#158688) + ); +#158644 = ORIENTED_EDGE('',*,*,#158645,.T.); +#158645 = EDGE_CURVE('',#158646,#158648,#158650,.T.); +#158646 = VERTEX_POINT('',#158647); +#158647 = CARTESIAN_POINT('',(151.230935,-107.415179,1.585)); +#158648 = VERTEX_POINT('',#158649); +#158649 = CARTESIAN_POINT('',(150.983569,-107.167814,1.585)); +#158650 = CIRCLE('',#158651,0.347631916063); +#158651 = AXIS2_PLACEMENT_3D('',#158652,#158653,#158654); +#158652 = CARTESIAN_POINT('',(150.89482231879,-107.5039270399,1.585)); +#158653 = DIRECTION('',(0.,0.,1.)); +#158654 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#158655 = ORIENTED_EDGE('',*,*,#158656,.T.); +#158656 = EDGE_CURVE('',#158648,#158657,#158659,.T.); +#158657 = VERTEX_POINT('',#158658); +#158658 = CARTESIAN_POINT('',(150.452364,-107.167814,1.585)); +#158659 = LINE('',#158660,#158661); +#158660 = CARTESIAN_POINT('',(150.983569,-107.167814,1.585)); +#158661 = VECTOR('',#158662,1.); +#158662 = DIRECTION('',(-1.,0.,0.)); +#158663 = ORIENTED_EDGE('',*,*,#158664,.T.); +#158664 = EDGE_CURVE('',#158657,#158665,#158667,.T.); +#158665 = VERTEX_POINT('',#158666); +#158666 = CARTESIAN_POINT('',(150.452364,-107.860671,1.585)); +#158667 = LINE('',#158668,#158669); +#158668 = CARTESIAN_POINT('',(150.452364,-107.167814,1.585)); +#158669 = VECTOR('',#158670,1.); +#158670 = DIRECTION('',(0.,-1.,0.)); +#158671 = ORIENTED_EDGE('',*,*,#158672,.T.); +#158672 = EDGE_CURVE('',#158665,#158673,#158675,.T.); +#158673 = VERTEX_POINT('',#158674); +#158674 = CARTESIAN_POINT('',(150.983569,-107.860671,1.585)); +#158675 = LINE('',#158676,#158677); +#158676 = CARTESIAN_POINT('',(150.452364,-107.860671,1.585)); +#158677 = VECTOR('',#158678,1.); +#158678 = DIRECTION('',(1.,0.,0.)); +#158679 = ORIENTED_EDGE('',*,*,#158680,.T.); +#158680 = EDGE_CURVE('',#158673,#158681,#158683,.T.); +#158681 = VERTEX_POINT('',#158682); +#158682 = CARTESIAN_POINT('',(151.230935,-107.613305,1.585)); +#158683 = CIRCLE('',#158684,0.347641001424); +#158684 = AXIS2_PLACEMENT_3D('',#158685,#158686,#158687); +#158685 = CARTESIAN_POINT('',(150.89481460111,-107.5245506011,1.585)); +#158686 = DIRECTION('',(0.,0.,1.)); +#158687 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#158688 = ORIENTED_EDGE('',*,*,#158689,.T.); +#158689 = EDGE_CURVE('',#158681,#158646,#158690,.T.); +#158690 = LINE('',#158691,#158692); +#158691 = CARTESIAN_POINT('',(151.230935,-107.613305,1.585)); +#158692 = VECTOR('',#158693,1.); +#158693 = DIRECTION('',(0.,1.,0.)); +#158694 = PLANE('',#158695); +#158695 = AXIS2_PLACEMENT_3D('',#158696,#158697,#158698); +#158696 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158697 = DIRECTION('',(0.,0.,1.)); +#158698 = DIRECTION('',(1.,0.,-0.)); +#158699 = SHELL_BASED_SURFACE_MODEL('',(#158700)); +#158700 = OPEN_SHELL('',(#158701)); +#158701 = ADVANCED_FACE('',(#158702),#158788,.T.); +#158702 = FACE_BOUND('',#158703,.F.); +#158703 = EDGE_LOOP('',(#158704,#158715,#158723,#158731,#158739,#158748, + #158756,#158765,#158773,#158782)); +#158704 = ORIENTED_EDGE('',*,*,#158705,.T.); +#158705 = EDGE_CURVE('',#158706,#158708,#158710,.T.); +#158706 = VERTEX_POINT('',#158707); +#158707 = CARTESIAN_POINT('',(152.004766,-107.618428,1.585)); +#158708 = VERTEX_POINT('',#158709); +#158709 = CARTESIAN_POINT('',(152.248164,-107.614088,1.585)); +#158710 = CIRCLE('',#158711,0.12449085405); +#158711 = AXIS2_PLACEMENT_3D('',#158712,#158713,#158714); +#158712 = CARTESIAN_POINT('',(152.12693079231,-107.6423807923,1.585)); +#158713 = DIRECTION('',(0.,0.,-1.)); +#158714 = DIRECTION('',(-0.981315400644,0.192406040597,0.)); +#158715 = ORIENTED_EDGE('',*,*,#158716,.T.); +#158716 = EDGE_CURVE('',#158708,#158717,#158719,.T.); +#158717 = VERTEX_POINT('',#158718); +#158718 = CARTESIAN_POINT('',(152.437205,-107.522253,1.585)); +#158719 = LINE('',#158720,#158721); +#158720 = CARTESIAN_POINT('',(152.248164,-107.614088,1.585)); +#158721 = VECTOR('',#158722,1.); +#158722 = DIRECTION('',(0.899479947392,0.436962039815,0.)); +#158723 = ORIENTED_EDGE('',*,*,#158724,.T.); +#158724 = EDGE_CURVE('',#158717,#158725,#158727,.T.); +#158725 = VERTEX_POINT('',#158726); +#158726 = CARTESIAN_POINT('',(152.470221,-107.517814,1.585)); +#158727 = LINE('',#158728,#158729); +#158728 = CARTESIAN_POINT('',(152.437205,-107.522253,1.585)); +#158729 = VECTOR('',#158730,1.); +#158730 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#158731 = ORIENTED_EDGE('',*,*,#158732,.T.); +#158732 = EDGE_CURVE('',#158725,#158733,#158735,.T.); +#158733 = VERTEX_POINT('',#158734); +#158734 = CARTESIAN_POINT('',(152.666036,-107.520216,1.585)); +#158735 = LINE('',#158736,#158737); +#158736 = CARTESIAN_POINT('',(152.470221,-107.517814,1.585)); +#158737 = VECTOR('',#158738,1.); +#158738 = DIRECTION('',(0.999924772767,-1.226575749657E-02,0.)); +#158739 = ORIENTED_EDGE('',*,*,#158740,.T.); +#158740 = EDGE_CURVE('',#158733,#158741,#158743,.T.); +#158741 = VERTEX_POINT('',#158742); +#158742 = CARTESIAN_POINT('',(152.666036,-107.765412,1.585)); +#158743 = CIRCLE('',#158744,0.1249997864); +#158744 = AXIS2_PLACEMENT_3D('',#158745,#158746,#158747); +#158745 = CARTESIAN_POINT('',(152.64165,-107.642814,1.585)); +#158746 = DIRECTION('',(0.,0.,-1.)); +#158747 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#158748 = ORIENTED_EDGE('',*,*,#158749,.T.); +#158749 = EDGE_CURVE('',#158741,#158750,#158752,.T.); +#158750 = VERTEX_POINT('',#158751); +#158751 = CARTESIAN_POINT('',(152.49973,-107.767814,1.585)); +#158752 = LINE('',#158753,#158754); +#158753 = CARTESIAN_POINT('',(152.666036,-107.765412,1.585)); +#158754 = VECTOR('',#158755,1.); +#158755 = DIRECTION('',(-0.999895712506,-1.444174895339E-02,0.)); +#158756 = ORIENTED_EDGE('',*,*,#158757,.T.); +#158757 = EDGE_CURVE('',#158750,#158758,#158760,.T.); +#158758 = VERTEX_POINT('',#158759); +#158759 = CARTESIAN_POINT('',(152.252364,-108.015179,1.585)); +#158760 = CIRCLE('',#158761,0.347632380397); +#158761 = AXIS2_PLACEMENT_3D('',#158762,#158763,#158764); +#158762 = CARTESIAN_POINT('',(152.58847706113,-108.1039274199,1.585)); +#158763 = DIRECTION('',(0.,0.,1.)); +#158764 = DIRECTION('',(-0.25528997337,0.966864535236,0.)); +#158765 = ORIENTED_EDGE('',*,*,#158766,.T.); +#158766 = EDGE_CURVE('',#158758,#158767,#158769,.T.); +#158767 = VERTEX_POINT('',#158768); +#158768 = CARTESIAN_POINT('',(152.249962,-108.8672,1.585)); +#158769 = LINE('',#158770,#158771); +#158770 = CARTESIAN_POINT('',(152.252364,-108.015179,1.585)); +#158771 = VECTOR('',#158772,1.); +#158772 = DIRECTION('',(-2.819168136433E-03,-0.999996026138,0.)); +#158773 = ORIENTED_EDGE('',*,*,#158774,.T.); +#158774 = EDGE_CURVE('',#158767,#158775,#158777,.T.); +#158775 = VERTEX_POINT('',#158776); +#158776 = CARTESIAN_POINT('',(152.004766,-108.8672,1.585)); +#158777 = CIRCLE('',#158778,0.1249997864); +#158778 = AXIS2_PLACEMENT_3D('',#158779,#158780,#158781); +#158779 = CARTESIAN_POINT('',(152.127364,-108.842814,1.585)); +#158780 = DIRECTION('',(-0.,0.,-1.)); +#158781 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158782 = ORIENTED_EDGE('',*,*,#158783,.T.); +#158783 = EDGE_CURVE('',#158775,#158706,#158784,.T.); +#158784 = LINE('',#158785,#158786); +#158785 = CARTESIAN_POINT('',(152.004766,-108.8672,1.585)); +#158786 = VECTOR('',#158787,1.); +#158787 = DIRECTION('',(0.,1.,0.)); +#158788 = PLANE('',#158789); +#158789 = AXIS2_PLACEMENT_3D('',#158790,#158791,#158792); +#158790 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158791 = DIRECTION('',(0.,0.,1.)); +#158792 = DIRECTION('',(1.,0.,-0.)); +#158793 = SHELL_BASED_SURFACE_MODEL('',(#158794)); +#158794 = OPEN_SHELL('',(#158795)); +#158795 = ADVANCED_FACE('',(#158796),#158970,.T.); +#158796 = FACE_BOUND('',#158797,.F.); +#158797 = EDGE_LOOP('',(#158798,#158809,#158817,#158825,#158834,#158842, + #158850,#158858,#158866,#158874,#158883,#158891,#158899,#158907, + #158915,#158923,#158931,#158940,#158948,#158956,#158964)); +#158798 = ORIENTED_EDGE('',*,*,#158799,.T.); +#158799 = EDGE_CURVE('',#158800,#158802,#158804,.T.); +#158800 = VERTEX_POINT('',#158801); +#158801 = CARTESIAN_POINT('',(188.708315,-107.785559,1.585)); +#158802 = VERTEX_POINT('',#158803); +#158803 = CARTESIAN_POINT('',(188.824983,-107.847919,1.585)); +#158804 = CIRCLE('',#158805,7.500000000004E-02); +#158805 = AXIS2_PLACEMENT_3D('',#158806,#158807,#158808); +#158806 = CARTESIAN_POINT('',(188.749983,-107.8479190655,1.585)); +#158807 = DIRECTION('',(0.,0.,-1.)); +#158808 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#158809 = ORIENTED_EDGE('',*,*,#158810,.T.); +#158810 = EDGE_CURVE('',#158802,#158811,#158813,.T.); +#158811 = VERTEX_POINT('',#158812); +#158812 = CARTESIAN_POINT('',(188.824983,-108.106252,1.585)); +#158813 = LINE('',#158814,#158815); +#158814 = CARTESIAN_POINT('',(188.824983,-107.847919,1.585)); +#158815 = VECTOR('',#158816,1.); +#158816 = DIRECTION('',(0.,-1.,0.)); +#158817 = ORIENTED_EDGE('',*,*,#158818,.T.); +#158818 = EDGE_CURVE('',#158811,#158819,#158821,.T.); +#158819 = VERTEX_POINT('',#158820); +#158820 = CARTESIAN_POINT('',(189.00271,-108.107693,1.585)); +#158821 = LINE('',#158822,#158823); +#158822 = CARTESIAN_POINT('',(188.824983,-108.106252,1.585)); +#158823 = VECTOR('',#158824,1.); +#158824 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#158825 = ORIENTED_EDGE('',*,*,#158826,.T.); +#158826 = EDGE_CURVE('',#158819,#158827,#158829,.T.); +#158827 = VERTEX_POINT('',#158828); +#158828 = CARTESIAN_POINT('',(188.988078,-108.256252,1.585)); +#158829 = CIRCLE('',#158830,7.500006711464E-02); +#158830 = AXIS2_PLACEMENT_3D('',#158831,#158832,#158833); +#158831 = CARTESIAN_POINT('',(188.98807806711,-108.1812519328,1.585)); +#158832 = DIRECTION('',(0.,0.,-1.)); +#158833 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#158834 = ORIENTED_EDGE('',*,*,#158835,.T.); +#158835 = EDGE_CURVE('',#158827,#158836,#158838,.T.); +#158836 = VERTEX_POINT('',#158837); +#158837 = CARTESIAN_POINT('',(188.824983,-108.256252,1.585)); +#158838 = LINE('',#158839,#158840); +#158839 = CARTESIAN_POINT('',(188.988078,-108.256252,1.585)); +#158840 = VECTOR('',#158841,1.); +#158841 = DIRECTION('',(-1.,0.,0.)); +#158842 = ORIENTED_EDGE('',*,*,#158843,.T.); +#158843 = EDGE_CURVE('',#158836,#158844,#158846,.T.); +#158844 = VERTEX_POINT('',#158845); +#158845 = CARTESIAN_POINT('',(188.824983,-108.687356,1.585)); +#158846 = LINE('',#158847,#158848); +#158847 = CARTESIAN_POINT('',(188.824983,-108.256252,1.585)); +#158848 = VECTOR('',#158849,1.); +#158849 = DIRECTION('',(0.,-1.,0.)); +#158850 = ORIENTED_EDGE('',*,*,#158851,.T.); +#158851 = EDGE_CURVE('',#158844,#158852,#158854,.T.); +#158852 = VERTEX_POINT('',#158853); +#158853 = CARTESIAN_POINT('',(188.853503,-108.744398,1.585)); +#158854 = LINE('',#158855,#158856); +#158855 = CARTESIAN_POINT('',(188.824983,-108.687356,1.585)); +#158856 = VECTOR('',#158857,1.); +#158857 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#158858 = ORIENTED_EDGE('',*,*,#158859,.T.); +#158859 = EDGE_CURVE('',#158852,#158860,#158862,.T.); +#158860 = VERTEX_POINT('',#158861); +#158861 = CARTESIAN_POINT('',(188.910545,-108.772919,1.585)); +#158862 = LINE('',#158863,#158864); +#158863 = CARTESIAN_POINT('',(188.853503,-108.744398,1.585)); +#158864 = VECTOR('',#158865,1.); +#158865 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#158866 = ORIENTED_EDGE('',*,*,#158867,.T.); +#158867 = EDGE_CURVE('',#158860,#158868,#158870,.T.); +#158868 = VERTEX_POINT('',#158869); +#158869 = CARTESIAN_POINT('',(189.00271,-108.77436,1.585)); +#158870 = LINE('',#158871,#158872); +#158871 = CARTESIAN_POINT('',(188.910545,-108.772919,1.585)); +#158872 = VECTOR('',#158873,1.); +#158873 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#158874 = ORIENTED_EDGE('',*,*,#158875,.T.); +#158875 = EDGE_CURVE('',#158868,#158876,#158878,.T.); +#158876 = VERTEX_POINT('',#158877); +#158877 = CARTESIAN_POINT('',(188.988078,-108.922919,1.585)); +#158878 = CIRCLE('',#158879,7.500006711464E-02); +#158879 = AXIS2_PLACEMENT_3D('',#158880,#158881,#158882); +#158880 = CARTESIAN_POINT('',(188.98807806711,-108.8479189328,1.585)); +#158881 = DIRECTION('',(0.,0.,-1.)); +#158882 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#158883 = ORIENTED_EDGE('',*,*,#158884,.T.); +#158884 = EDGE_CURVE('',#158876,#158885,#158887,.T.); +#158885 = VERTEX_POINT('',#158886); +#158886 = CARTESIAN_POINT('',(188.87303,-108.920256,1.585)); +#158887 = LINE('',#158888,#158889); +#158888 = CARTESIAN_POINT('',(188.988078,-108.922919,1.585)); +#158889 = VECTOR('',#158890,1.); +#158890 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#158891 = ORIENTED_EDGE('',*,*,#158892,.T.); +#158892 = EDGE_CURVE('',#158885,#158893,#158895,.T.); +#158893 = VERTEX_POINT('',#158894); +#158894 = CARTESIAN_POINT('',(188.751618,-108.85955,1.585)); +#158895 = LINE('',#158896,#158897); +#158896 = CARTESIAN_POINT('',(188.87303,-108.920256,1.585)); +#158897 = VECTOR('',#158898,1.); +#158898 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#158899 = ORIENTED_EDGE('',*,*,#158900,.T.); +#158900 = EDGE_CURVE('',#158893,#158901,#158903,.T.); +#158901 = VERTEX_POINT('',#158902); +#158902 = CARTESIAN_POINT('',(188.73052,-108.833841,1.585)); +#158903 = LINE('',#158904,#158905); +#158904 = CARTESIAN_POINT('',(188.751618,-108.85955,1.585)); +#158905 = VECTOR('',#158906,1.); +#158906 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#158907 = ORIENTED_EDGE('',*,*,#158908,.T.); +#158908 = EDGE_CURVE('',#158901,#158909,#158911,.T.); +#158909 = VERTEX_POINT('',#158910); +#158910 = CARTESIAN_POINT('',(188.676424,-108.719693,1.585)); +#158911 = LINE('',#158912,#158913); +#158912 = CARTESIAN_POINT('',(188.73052,-108.833841,1.585)); +#158913 = VECTOR('',#158914,1.); +#158914 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#158915 = ORIENTED_EDGE('',*,*,#158916,.T.); +#158916 = EDGE_CURVE('',#158909,#158917,#158919,.T.); +#158917 = VERTEX_POINT('',#158918); +#158918 = CARTESIAN_POINT('',(188.674983,-108.256252,1.585)); +#158919 = LINE('',#158920,#158921); +#158920 = CARTESIAN_POINT('',(188.676424,-108.719693,1.585)); +#158921 = VECTOR('',#158922,1.); +#158922 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#158923 = ORIENTED_EDGE('',*,*,#158924,.T.); +#158924 = EDGE_CURVE('',#158917,#158925,#158927,.T.); +#158925 = VERTEX_POINT('',#158926); +#158926 = CARTESIAN_POINT('',(188.592494,-108.254811,1.585)); +#158927 = LINE('',#158928,#158929); +#158928 = CARTESIAN_POINT('',(188.674983,-108.256252,1.585)); +#158929 = VECTOR('',#158930,1.); +#158930 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#158931 = ORIENTED_EDGE('',*,*,#158932,.T.); +#158932 = EDGE_CURVE('',#158925,#158933,#158935,.T.); +#158933 = VERTEX_POINT('',#158934); +#158934 = CARTESIAN_POINT('',(188.607126,-108.106252,1.585)); +#158935 = CIRCLE('',#158936,7.500006711464E-02); +#158936 = AXIS2_PLACEMENT_3D('',#158937,#158938,#158939); +#158937 = CARTESIAN_POINT('',(188.60712593288,-108.1812520671,1.585)); +#158938 = DIRECTION('',(0.,0.,-1.)); +#158939 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#158940 = ORIENTED_EDGE('',*,*,#158941,.T.); +#158941 = EDGE_CURVE('',#158933,#158942,#158944,.T.); +#158942 = VERTEX_POINT('',#158943); +#158943 = CARTESIAN_POINT('',(188.674983,-108.106252,1.585)); +#158944 = LINE('',#158945,#158946); +#158945 = CARTESIAN_POINT('',(188.607126,-108.106252,1.585)); +#158946 = VECTOR('',#158947,1.); +#158947 = DIRECTION('',(1.,0.,0.)); +#158948 = ORIENTED_EDGE('',*,*,#158949,.T.); +#158949 = EDGE_CURVE('',#158942,#158950,#158952,.T.); +#158950 = VERTEX_POINT('',#158951); +#158951 = CARTESIAN_POINT('',(188.676424,-107.833287,1.585)); +#158952 = LINE('',#158953,#158954); +#158953 = CARTESIAN_POINT('',(188.674983,-108.106252,1.585)); +#158954 = VECTOR('',#158955,1.); +#158955 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#158956 = ORIENTED_EDGE('',*,*,#158957,.T.); +#158957 = EDGE_CURVE('',#158950,#158958,#158960,.T.); +#158958 = VERTEX_POINT('',#158959); +#158959 = CARTESIAN_POINT('',(188.687623,-107.806251,1.585)); +#158960 = LINE('',#158961,#158962); +#158961 = CARTESIAN_POINT('',(188.676424,-107.833287,1.585)); +#158962 = VECTOR('',#158963,1.); +#158963 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#158964 = ORIENTED_EDGE('',*,*,#158965,.T.); +#158965 = EDGE_CURVE('',#158958,#158800,#158966,.T.); +#158966 = LINE('',#158967,#158968); +#158967 = CARTESIAN_POINT('',(188.687623,-107.806251,1.585)); +#158968 = VECTOR('',#158969,1.); +#158969 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158970 = PLANE('',#158971); +#158971 = AXIS2_PLACEMENT_3D('',#158972,#158973,#158974); +#158972 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158973 = DIRECTION('',(0.,0.,1.)); +#158974 = DIRECTION('',(1.,0.,-0.)); +#158975 = SHELL_BASED_SURFACE_MODEL('',(#158976)); +#158976 = OPEN_SHELL('',(#158977)); +#158977 = ADVANCED_FACE('',(#158978),#159137,.T.); +#158978 = FACE_BOUND('',#158979,.F.); +#158979 = EDGE_LOOP('',(#158980,#158991,#158999,#159007,#159015,#159023, + #159031,#159039,#159048,#159056,#159065,#159073,#159081,#159089, + #159098,#159106,#159114,#159122,#159131)); +#158980 = ORIENTED_EDGE('',*,*,#158981,.T.); +#158981 = EDGE_CURVE('',#158982,#158984,#158986,.T.); +#158982 = VERTEX_POINT('',#158983); +#158983 = CARTESIAN_POINT('',(189.287871,-107.828456,1.585)); +#158984 = VERTEX_POINT('',#158985); +#158985 = CARTESIAN_POINT('',(189.797266,-107.837786,1.585)); +#158986 = CIRCLE('',#158987,0.450326844012); +#158987 = AXIS2_PLACEMENT_3D('',#158988,#158989,#158990); +#158988 = CARTESIAN_POINT('',(189.5357680301,-108.2044098919,1.585)); +#158989 = DIRECTION('',(0.,0.,-1.)); +#158990 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#158991 = ORIENTED_EDGE('',*,*,#158992,.T.); +#158992 = EDGE_CURVE('',#158984,#158993,#158995,.T.); +#158993 = VERTEX_POINT('',#158994); +#158994 = CARTESIAN_POINT('',(189.860719,-107.903316,1.585)); +#158995 = LINE('',#158996,#158997); +#158996 = CARTESIAN_POINT('',(189.797266,-107.837786,1.585)); +#158997 = VECTOR('',#158998,1.); +#158998 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#158999 = ORIENTED_EDGE('',*,*,#159000,.T.); +#159000 = EDGE_CURVE('',#158993,#159001,#159003,.T.); +#159001 = VERTEX_POINT('',#159002); +#159002 = CARTESIAN_POINT('',(189.91878,-108.023763,1.585)); +#159003 = LINE('',#159004,#159005); +#159004 = CARTESIAN_POINT('',(189.860719,-107.903316,1.585)); +#159005 = VECTOR('',#159006,1.); +#159006 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#159007 = ORIENTED_EDGE('',*,*,#159008,.T.); +#159008 = EDGE_CURVE('',#159001,#159009,#159011,.T.); +#159009 = VERTEX_POINT('',#159010); +#159010 = CARTESIAN_POINT('',(189.918021,-108.150095,1.585)); +#159011 = LINE('',#159012,#159013); +#159012 = CARTESIAN_POINT('',(189.91878,-108.023763,1.585)); +#159013 = VECTOR('',#159014,1.); +#159014 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#159015 = ORIENTED_EDGE('',*,*,#159016,.T.); +#159016 = EDGE_CURVE('',#159009,#159017,#159019,.T.); +#159017 = VERTEX_POINT('',#159018); +#159018 = CARTESIAN_POINT('',(189.859963,-108.318158,1.585)); +#159019 = LINE('',#159020,#159021); +#159020 = CARTESIAN_POINT('',(189.918021,-108.150095,1.585)); +#159021 = VECTOR('',#159022,1.); +#159022 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#159023 = ORIENTED_EDGE('',*,*,#159024,.T.); +#159024 = EDGE_CURVE('',#159017,#159025,#159027,.T.); +#159025 = VERTEX_POINT('',#159026); +#159026 = CARTESIAN_POINT('',(189.40724,-108.772919,1.585)); +#159027 = LINE('',#159028,#159029); +#159028 = CARTESIAN_POINT('',(189.859963,-108.318158,1.585)); +#159029 = VECTOR('',#159030,1.); +#159030 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#159031 = ORIENTED_EDGE('',*,*,#159032,.T.); +#159032 = EDGE_CURVE('',#159025,#159033,#159035,.T.); +#159033 = VERTEX_POINT('',#159034); +#159034 = CARTESIAN_POINT('',(189.859853,-108.77436,1.585)); +#159035 = LINE('',#159036,#159037); +#159036 = CARTESIAN_POINT('',(189.40724,-108.772919,1.585)); +#159037 = VECTOR('',#159038,1.); +#159038 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#159039 = ORIENTED_EDGE('',*,*,#159040,.T.); +#159040 = EDGE_CURVE('',#159033,#159041,#159043,.T.); +#159041 = VERTEX_POINT('',#159042); +#159042 = CARTESIAN_POINT('',(189.845221,-108.922919,1.585)); +#159043 = CIRCLE('',#159044,7.500006711463E-02); +#159044 = AXIS2_PLACEMENT_3D('',#159045,#159046,#159047); +#159045 = CARTESIAN_POINT('',(189.84522106711,-108.8479189328,1.585)); +#159046 = DIRECTION('',(0.,0.,-1.)); +#159047 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#159048 = ORIENTED_EDGE('',*,*,#159049,.T.); +#159049 = EDGE_CURVE('',#159041,#159050,#159052,.T.); +#159050 = VERTEX_POINT('',#159051); +#159051 = CARTESIAN_POINT('',(189.211542,-108.921478,1.585)); +#159052 = LINE('',#159053,#159054); +#159053 = CARTESIAN_POINT('',(189.845221,-108.922919,1.585)); +#159054 = VECTOR('',#159055,1.); +#159055 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#159056 = ORIENTED_EDGE('',*,*,#159057,.T.); +#159057 = EDGE_CURVE('',#159050,#159058,#159060,.T.); +#159058 = VERTEX_POINT('',#159059); +#159059 = CARTESIAN_POINT('',(189.173141,-108.794886,1.585)); +#159060 = CIRCLE('',#159061,7.500021013109E-02); +#159061 = AXIS2_PLACEMENT_3D('',#159062,#159063,#159064); +#159062 = CARTESIAN_POINT('',(189.2261743167,-108.8479189976,1.585)); +#159063 = DIRECTION('',(0.,0.,-1.)); +#159064 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#159065 = ORIENTED_EDGE('',*,*,#159066,.T.); +#159066 = EDGE_CURVE('',#159058,#159067,#159069,.T.); +#159067 = VERTEX_POINT('',#159068); +#159068 = CARTESIAN_POINT('',(189.732049,-108.235976,1.585)); +#159069 = LINE('',#159070,#159071); +#159070 = CARTESIAN_POINT('',(189.173141,-108.794886,1.585)); +#159071 = VECTOR('',#159072,1.); +#159072 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#159073 = ORIENTED_EDGE('',*,*,#159074,.T.); +#159074 = EDGE_CURVE('',#159067,#159075,#159077,.T.); +#159075 = VERTEX_POINT('',#159076); +#159076 = CARTESIAN_POINT('',(189.770221,-108.121463,1.585)); +#159077 = LINE('',#159078,#159079); +#159078 = CARTESIAN_POINT('',(189.732049,-108.235976,1.585)); +#159079 = VECTOR('',#159080,1.); +#159080 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#159081 = ORIENTED_EDGE('',*,*,#159082,.T.); +#159082 = EDGE_CURVE('',#159075,#159083,#159085,.T.); +#159083 = VERTEX_POINT('',#159084); +#159084 = CARTESIAN_POINT('',(189.770221,-108.0561,1.585)); +#159085 = LINE('',#159086,#159087); +#159086 = CARTESIAN_POINT('',(189.770221,-108.121463,1.585)); +#159087 = VECTOR('',#159088,1.); +#159088 = DIRECTION('',(0.,1.,0.)); +#159089 = ORIENTED_EDGE('',*,*,#159090,.T.); +#159090 = EDGE_CURVE('',#159083,#159091,#159093,.T.); +#159091 = VERTEX_POINT('',#159092); +#159092 = CARTESIAN_POINT('',(189.63704,-107.922919,1.585)); +#159093 = CIRCLE('',#159094,0.18686440374); +#159094 = AXIS2_PLACEMENT_3D('',#159095,#159096,#159097); +#159095 = CARTESIAN_POINT('',(189.589504,-108.103636,1.585)); +#159096 = DIRECTION('',(0.,0.,1.)); +#159097 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#159098 = ORIENTED_EDGE('',*,*,#159099,.T.); +#159099 = EDGE_CURVE('',#159091,#159100,#159102,.T.); +#159100 = VERTEX_POINT('',#159101); +#159101 = CARTESIAN_POINT('',(189.434355,-107.922919,1.585)); +#159102 = LINE('',#159103,#159104); +#159103 = CARTESIAN_POINT('',(189.63704,-107.922919,1.585)); +#159104 = VECTOR('',#159105,1.); +#159105 = DIRECTION('',(-1.,0.,0.)); +#159106 = ORIENTED_EDGE('',*,*,#159107,.T.); +#159107 = EDGE_CURVE('',#159100,#159108,#159110,.T.); +#159108 = VERTEX_POINT('',#159109); +#159109 = CARTESIAN_POINT('',(189.365839,-107.957177,1.585)); +#159110 = LINE('',#159111,#159112); +#159111 = CARTESIAN_POINT('',(189.434355,-107.922919,1.585)); +#159112 = VECTOR('',#159113,1.); +#159113 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#159114 = ORIENTED_EDGE('',*,*,#159115,.T.); +#159115 = EDGE_CURVE('',#159108,#159116,#159118,.T.); +#159116 = VERTEX_POINT('',#159117); +#159117 = CARTESIAN_POINT('',(189.315461,-108.005517,1.585)); +#159118 = LINE('',#159119,#159120); +#159119 = CARTESIAN_POINT('',(189.365839,-107.957177,1.585)); +#159120 = VECTOR('',#159121,1.); +#159121 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#159122 = ORIENTED_EDGE('',*,*,#159123,.T.); +#159123 = EDGE_CURVE('',#159116,#159124,#159126,.T.); +#159124 = VERTEX_POINT('',#159125); +#159125 = CARTESIAN_POINT('',(189.22076,-107.890124,1.585)); +#159126 = CIRCLE('',#159127,7.499996838527E-02); +#159127 = AXIS2_PLACEMENT_3D('',#159128,#159129,#159130); +#159128 = CARTESIAN_POINT('',(189.273793,-107.9431569724,1.585)); +#159129 = DIRECTION('',(0.,0.,-1.)); +#159130 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#159131 = ORIENTED_EDGE('',*,*,#159132,.T.); +#159132 = EDGE_CURVE('',#159124,#158982,#159133,.T.); +#159133 = LINE('',#159134,#159135); +#159134 = CARTESIAN_POINT('',(189.22076,-107.890124,1.585)); +#159135 = VECTOR('',#159136,1.); +#159136 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#159137 = PLANE('',#159138); +#159138 = AXIS2_PLACEMENT_3D('',#159139,#159140,#159141); +#159139 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159140 = DIRECTION('',(0.,0.,1.)); +#159141 = DIRECTION('',(1.,0.,-0.)); +#159142 = SHELL_BASED_SURFACE_MODEL('',(#159143)); +#159143 = OPEN_SHELL('',(#159144)); +#159144 = ADVANCED_FACE('',(#159145),#159330,.T.); +#159145 = FACE_BOUND('',#159146,.F.); +#159146 = EDGE_LOOP('',(#159147,#159158,#159166,#159175,#159183,#159192, + #159200,#159209,#159217,#159225,#159233,#159242,#159250,#159259, + #159267,#159276,#159284,#159292,#159300,#159308,#159316,#159324)); +#159147 = ORIENTED_EDGE('',*,*,#159148,.T.); +#159148 = EDGE_CURVE('',#159149,#159151,#159153,.T.); +#159149 = VERTEX_POINT('',#159150); +#159150 = CARTESIAN_POINT('',(186.141411,-107.830381,1.585)); +#159151 = VERTEX_POINT('',#159152); +#159152 = CARTESIAN_POINT('',(186.601174,-107.833178,1.585)); +#159153 = CIRCLE('',#159154,0.46078517582); +#159154 = AXIS2_PLACEMENT_3D('',#159155,#159156,#159157); +#159155 = CARTESIAN_POINT('',(186.36886310897,-108.2311159702,1.585)); +#159156 = DIRECTION('',(0.,0.,-1.)); +#159157 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#159158 = ORIENTED_EDGE('',*,*,#159159,.T.); +#159159 = EDGE_CURVE('',#159151,#159160,#159162,.T.); +#159160 = VERTEX_POINT('',#159161); +#159161 = CARTESIAN_POINT('',(186.669485,-107.901489,1.585)); +#159162 = LINE('',#159163,#159164); +#159163 = CARTESIAN_POINT('',(186.601174,-107.833178,1.585)); +#159164 = VECTOR('',#159165,1.); +#159165 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#159166 = ORIENTED_EDGE('',*,*,#159167,.T.); +#159167 = EDGE_CURVE('',#159160,#159168,#159170,.T.); +#159168 = VERTEX_POINT('',#159169); +#159169 = CARTESIAN_POINT('',(186.554092,-107.99619,1.585)); +#159170 = CIRCLE('',#159171,7.500003178657E-02); +#159171 = AXIS2_PLACEMENT_3D('',#159172,#159173,#159174); +#159172 = CARTESIAN_POINT('',(186.60712456212,-107.9431565,1.585)); +#159173 = DIRECTION('',(0.,0.,-1.)); +#159174 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#159175 = ORIENTED_EDGE('',*,*,#159176,.T.); +#159176 = EDGE_CURVE('',#159168,#159177,#159179,.T.); +#159177 = VERTEX_POINT('',#159178); +#159178 = CARTESIAN_POINT('',(186.518992,-107.96109,1.585)); +#159179 = LINE('',#159180,#159181); +#159180 = CARTESIAN_POINT('',(186.554092,-107.99619,1.585)); +#159181 = VECTOR('',#159182,1.); +#159182 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#159183 = ORIENTED_EDGE('',*,*,#159184,.T.); +#159184 = EDGE_CURVE('',#159177,#159185,#159187,.T.); +#159185 = VERTEX_POINT('',#159186); +#159186 = CARTESIAN_POINT('',(186.219068,-107.96109,1.585)); +#159187 = CIRCLE('',#159188,0.299308637371); +#159188 = AXIS2_PLACEMENT_3D('',#159189,#159190,#159191); +#159189 = CARTESIAN_POINT('',(186.36903,-108.220121,1.585)); +#159190 = DIRECTION('',(0.,0.,1.)); +#159191 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#159192 = ORIENTED_EDGE('',*,*,#159193,.T.); +#159193 = EDGE_CURVE('',#159185,#159194,#159196,.T.); +#159194 = VERTEX_POINT('',#159195); +#159195 = CARTESIAN_POINT('',(186.144955,-108.035203,1.585)); +#159196 = LINE('',#159197,#159198); +#159197 = CARTESIAN_POINT('',(186.219068,-107.96109,1.585)); +#159198 = VECTOR('',#159199,1.); +#159199 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#159200 = ORIENTED_EDGE('',*,*,#159201,.T.); +#159201 = EDGE_CURVE('',#159194,#159202,#159204,.T.); +#159202 = VERTEX_POINT('',#159203); +#159203 = CARTESIAN_POINT('',(186.063078,-108.410113,1.585)); +#159204 = CIRCLE('',#159205,0.611712714363); +#159205 = AXIS2_PLACEMENT_3D('',#159206,#159207,#159208); +#159206 = CARTESIAN_POINT('',(186.67148327521,-108.3465876822,1.585)); +#159207 = DIRECTION('',(0.,0.,1.)); +#159208 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#159209 = ORIENTED_EDGE('',*,*,#159210,.T.); +#159210 = EDGE_CURVE('',#159202,#159211,#159213,.T.); +#159211 = VERTEX_POINT('',#159212); +#159212 = CARTESIAN_POINT('',(186.106461,-108.583647,1.585)); +#159213 = LINE('',#159214,#159215); +#159214 = CARTESIAN_POINT('',(186.063078,-108.410113,1.585)); +#159215 = VECTOR('',#159216,1.); +#159216 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#159217 = ORIENTED_EDGE('',*,*,#159218,.T.); +#159218 = EDGE_CURVE('',#159211,#159219,#159221,.T.); +#159219 = VERTEX_POINT('',#159220); +#159220 = CARTESIAN_POINT('',(186.144955,-108.660634,1.585)); +#159221 = LINE('',#159222,#159223); +#159222 = CARTESIAN_POINT('',(186.106461,-108.583647,1.585)); +#159223 = VECTOR('',#159224,1.); +#159224 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#159225 = ORIENTED_EDGE('',*,*,#159226,.T.); +#159226 = EDGE_CURVE('',#159219,#159227,#159229,.T.); +#159227 = VERTEX_POINT('',#159228); +#159228 = CARTESIAN_POINT('',(186.219068,-108.734748,1.585)); +#159229 = LINE('',#159230,#159231); +#159230 = CARTESIAN_POINT('',(186.144955,-108.660634,1.585)); +#159231 = VECTOR('',#159232,1.); +#159232 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#159233 = ORIENTED_EDGE('',*,*,#159234,.T.); +#159234 = EDGE_CURVE('',#159227,#159235,#159237,.T.); +#159235 = VERTEX_POINT('',#159236); +#159236 = CARTESIAN_POINT('',(186.518992,-108.734747,1.585)); +#159237 = CIRCLE('',#159238,0.299305962385); +#159238 = AXIS2_PLACEMENT_3D('',#159239,#159240,#159241); +#159239 = CARTESIAN_POINT('',(186.36902913635,-108.4757195909,1.585)); +#159240 = DIRECTION('',(0.,0.,1.)); +#159241 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#159242 = ORIENTED_EDGE('',*,*,#159243,.T.); +#159243 = EDGE_CURVE('',#159235,#159244,#159246,.T.); +#159244 = VERTEX_POINT('',#159245); +#159245 = CARTESIAN_POINT('',(186.565457,-108.69032,1.585)); +#159246 = LINE('',#159247,#159248); +#159247 = CARTESIAN_POINT('',(186.518992,-108.734747,1.585)); +#159248 = VECTOR('',#159249,1.); +#159249 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#159250 = ORIENTED_EDGE('',*,*,#159251,.T.); +#159251 = EDGE_CURVE('',#159244,#159252,#159254,.T.); +#159252 = VERTEX_POINT('',#159253); +#159253 = CARTESIAN_POINT('',(186.660158,-108.805713,1.585)); +#159254 = CIRCLE('',#159255,7.499993690112E-02); +#159255 = AXIS2_PLACEMENT_3D('',#159256,#159257,#159258); +#159256 = CARTESIAN_POINT('',(186.6071252483,-108.7526798237,1.585)); +#159257 = DIRECTION('',(0.,0.,-1.)); +#159258 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#159259 = ORIENTED_EDGE('',*,*,#159260,.T.); +#159260 = EDGE_CURVE('',#159252,#159261,#159263,.T.); +#159261 = VERTEX_POINT('',#159262); +#159262 = CARTESIAN_POINT('',(186.596648,-108.865457,1.585)); +#159263 = LINE('',#159264,#159265); +#159264 = CARTESIAN_POINT('',(186.660158,-108.805713,1.585)); +#159265 = VECTOR('',#159266,1.); +#159266 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#159267 = ORIENTED_EDGE('',*,*,#159268,.T.); +#159268 = EDGE_CURVE('',#159261,#159269,#159271,.T.); +#159269 = VERTEX_POINT('',#159270); +#159270 = CARTESIAN_POINT('',(186.136886,-108.862661,1.585)); +#159271 = CIRCLE('',#159272,0.461067828848); +#159272 = AXIS2_PLACEMENT_3D('',#159273,#159274,#159275); +#159273 = CARTESIAN_POINT('',(186.36919751268,-108.4643961335,1.585)); +#159274 = DIRECTION('',(-0.,0.,-1.)); +#159275 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#159276 = ORIENTED_EDGE('',*,*,#159277,.T.); +#159277 = EDGE_CURVE('',#159269,#159278,#159280,.T.); +#159278 = VERTEX_POINT('',#159279); +#159279 = CARTESIAN_POINT('',(186.020197,-108.744898,1.585)); +#159280 = LINE('',#159281,#159282); +#159281 = CARTESIAN_POINT('',(186.136886,-108.862661,1.585)); +#159282 = VECTOR('',#159283,1.); +#159283 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#159284 = ORIENTED_EDGE('',*,*,#159285,.T.); +#159285 = EDGE_CURVE('',#159278,#159286,#159288,.T.); +#159286 = VERTEX_POINT('',#159287); +#159287 = CARTESIAN_POINT('',(185.962936,-108.628013,1.585)); +#159288 = LINE('',#159289,#159290); +#159289 = CARTESIAN_POINT('',(186.020197,-108.744898,1.585)); +#159290 = VECTOR('',#159291,1.); +#159291 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#159292 = ORIENTED_EDGE('',*,*,#159293,.T.); +#159293 = EDGE_CURVE('',#159286,#159294,#159296,.T.); +#159294 = VERTEX_POINT('',#159295); +#159295 = CARTESIAN_POINT('',(185.913078,-108.419347,1.585)); +#159296 = LINE('',#159297,#159298); +#159297 = CARTESIAN_POINT('',(185.962936,-108.628013,1.585)); +#159298 = VECTOR('',#159299,1.); +#159299 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#159300 = ORIENTED_EDGE('',*,*,#159301,.T.); +#159301 = EDGE_CURVE('',#159294,#159302,#159304,.T.); +#159302 = VERTEX_POINT('',#159303); +#159303 = CARTESIAN_POINT('',(185.915317,-108.2583,1.585)); +#159304 = LINE('',#159305,#159306); +#159305 = CARTESIAN_POINT('',(185.913078,-108.419347,1.585)); +#159306 = VECTOR('',#159307,1.); +#159307 = DIRECTION('',(1.39014303055E-02,0.999903370449,0.)); +#159308 = ORIENTED_EDGE('',*,*,#159309,.T.); +#159309 = EDGE_CURVE('',#159302,#159310,#159312,.T.); +#159310 = VERTEX_POINT('',#159311); +#159311 = CARTESIAN_POINT('',(185.968615,-108.052473,1.585)); +#159312 = LINE('',#159313,#159314); +#159313 = CARTESIAN_POINT('',(185.915317,-108.2583,1.585)); +#159314 = VECTOR('',#159315,1.); +#159315 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#159316 = ORIENTED_EDGE('',*,*,#159317,.T.); +#159317 = EDGE_CURVE('',#159310,#159318,#159320,.T.); +#159318 = VERTEX_POINT('',#159319); +#159319 = CARTESIAN_POINT('',(186.025564,-107.943492,1.585)); +#159320 = LINE('',#159321,#159322); +#159321 = CARTESIAN_POINT('',(185.968615,-108.052473,1.585)); +#159322 = VECTOR('',#159323,1.); +#159323 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#159324 = ORIENTED_EDGE('',*,*,#159325,.T.); +#159325 = EDGE_CURVE('',#159318,#159149,#159326,.T.); +#159326 = LINE('',#159327,#159328); +#159327 = CARTESIAN_POINT('',(186.025564,-107.943492,1.585)); +#159328 = VECTOR('',#159329,1.); +#159329 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#159330 = PLANE('',#159331); +#159331 = AXIS2_PLACEMENT_3D('',#159332,#159333,#159334); +#159332 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159333 = DIRECTION('',(0.,0.,1.)); +#159334 = DIRECTION('',(1.,0.,-0.)); +#159335 = SHELL_BASED_SURFACE_MODEL('',(#159336)); +#159336 = OPEN_SHELL('',(#159337)); +#159337 = ADVANCED_FACE('',(#159338,#159479),#159547,.T.); +#159338 = FACE_BOUND('',#159339,.F.); +#159339 = EDGE_LOOP('',(#159340,#159350,#159358,#159366,#159374,#159382, + #159390,#159398,#159407,#159415,#159424,#159432,#159440,#159449, + #159457,#159465,#159473)); +#159340 = ORIENTED_EDGE('',*,*,#159341,.T.); +#159341 = EDGE_CURVE('',#159342,#159344,#159346,.T.); +#159342 = VERTEX_POINT('',#159343); +#159343 = CARTESIAN_POINT('',(186.973337,-107.806251,1.585)); +#159344 = VERTEX_POINT('',#159345); +#159345 = CARTESIAN_POINT('',(186.994029,-107.785559,1.585)); +#159346 = LINE('',#159347,#159348); +#159347 = CARTESIAN_POINT('',(186.973337,-107.806251,1.585)); +#159348 = VECTOR('',#159349,1.); +#159349 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#159350 = ORIENTED_EDGE('',*,*,#159351,.T.); +#159351 = EDGE_CURVE('',#159344,#159352,#159354,.T.); +#159352 = VERTEX_POINT('',#159353); +#159353 = CARTESIAN_POINT('',(187.008174,-107.779699,1.585)); +#159354 = LINE('',#159355,#159356); +#159355 = CARTESIAN_POINT('',(186.994029,-107.785559,1.585)); +#159356 = VECTOR('',#159357,1.); +#159357 = DIRECTION('',(0.923857613212,0.382736345948,0.)); +#159358 = ORIENTED_EDGE('',*,*,#159359,.T.); +#159359 = EDGE_CURVE('',#159352,#159360,#159362,.T.); +#159360 = VERTEX_POINT('',#159361); +#159361 = CARTESIAN_POINT('',(187.01693,-107.800836,1.585)); +#159362 = LINE('',#159363,#159364); +#159363 = CARTESIAN_POINT('',(187.008174,-107.779699,1.585)); +#159364 = VECTOR('',#159365,1.); +#159365 = DIRECTION('',(0.382712081872,-0.923867664976,0.)); +#159366 = ORIENTED_EDGE('',*,*,#159367,.T.); +#159367 = EDGE_CURVE('',#159360,#159368,#159370,.T.); +#159368 = VERTEX_POINT('',#159369); +#159369 = CARTESIAN_POINT('',(187.058314,-107.84222,1.585)); +#159370 = LINE('',#159371,#159372); +#159371 = CARTESIAN_POINT('',(187.01693,-107.800836,1.585)); +#159372 = VECTOR('',#159373,1.); +#159373 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#159374 = ORIENTED_EDGE('',*,*,#159375,.T.); +#159375 = EDGE_CURVE('',#159368,#159376,#159378,.T.); +#159376 = VERTEX_POINT('',#159377); +#159377 = CARTESIAN_POINT('',(187.110723,-107.863929,1.585)); +#159378 = LINE('',#159379,#159380); +#159379 = CARTESIAN_POINT('',(187.058314,-107.84222,1.585)); +#159380 = VECTOR('',#159381,1.); +#159381 = DIRECTION('',(0.923876532092,-0.382690675937,0.)); +#159382 = ORIENTED_EDGE('',*,*,#159383,.T.); +#159383 = EDGE_CURVE('',#159376,#159384,#159386,.T.); +#159384 = VERTEX_POINT('',#159385); +#159385 = CARTESIAN_POINT('',(187.111125,-108.108915,1.585)); +#159386 = LINE('',#159387,#159388); +#159387 = CARTESIAN_POINT('',(187.110723,-107.863929,1.585)); +#159388 = VECTOR('',#159389,1.); +#159389 = DIRECTION('',(1.640907883598E-03,-0.99999865371,0.)); +#159390 = ORIENTED_EDGE('',*,*,#159391,.T.); +#159391 = EDGE_CURVE('',#159384,#159392,#159394,.T.); +#159392 = VERTEX_POINT('',#159393); +#159393 = CARTESIAN_POINT('',(187.34122,-108.108915,1.585)); +#159394 = LINE('',#159395,#159396); +#159395 = CARTESIAN_POINT('',(187.111125,-108.108915,1.585)); +#159396 = VECTOR('',#159397,1.); +#159397 = DIRECTION('',(1.,0.,0.)); +#159398 = ORIENTED_EDGE('',*,*,#159399,.T.); +#159399 = EDGE_CURVE('',#159392,#159400,#159402,.T.); +#159400 = VERTEX_POINT('',#159401); +#159401 = CARTESIAN_POINT('',(187.585446,-108.357096,1.585)); +#159402 = CIRCLE('',#159403,0.348625649748); +#159403 = AXIS2_PLACEMENT_3D('',#159404,#159405,#159406); +#159404 = CARTESIAN_POINT('',(187.24804804586,-108.4448596838,1.585)); +#159405 = DIRECTION('',(0.,0.,-1.)); +#159406 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#159407 = ORIENTED_EDGE('',*,*,#159408,.T.); +#159408 = EDGE_CURVE('',#159400,#159409,#159411,.T.); +#159409 = VERTEX_POINT('',#159410); +#159410 = CARTESIAN_POINT('',(187.584224,-108.677252,1.585)); +#159411 = LINE('',#159412,#159413); +#159412 = CARTESIAN_POINT('',(187.585446,-108.357096,1.585)); +#159413 = VECTOR('',#159414,1.); +#159414 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#159415 = ORIENTED_EDGE('',*,*,#159416,.T.); +#159416 = EDGE_CURVE('',#159409,#159417,#159419,.T.); +#159417 = VERTEX_POINT('',#159418); +#159418 = CARTESIAN_POINT('',(187.336043,-108.921478,1.585)); +#159419 = CIRCLE('',#159420,0.348635327447); +#159420 = AXIS2_PLACEMENT_3D('',#159421,#159422,#159423); +#159421 = CARTESIAN_POINT('',(187.24827148129,-108.5840720841,1.585)); +#159422 = DIRECTION('',(0.,0.,-1.)); +#159423 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#159424 = ORIENTED_EDGE('',*,*,#159425,.T.); +#159425 = EDGE_CURVE('',#159417,#159426,#159428,.T.); +#159426 = VERTEX_POINT('',#159427); +#159427 = CARTESIAN_POINT('',(187.111125,-108.920256,1.585)); +#159428 = LINE('',#159429,#159430); +#159429 = CARTESIAN_POINT('',(187.336043,-108.921478,1.585)); +#159430 = VECTOR('',#159431,1.); +#159431 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#159432 = ORIENTED_EDGE('',*,*,#159433,.T.); +#159433 = EDGE_CURVE('',#159426,#159434,#159436,.T.); +#159434 = VERTEX_POINT('',#159435); +#159435 = CARTESIAN_POINT('',(187.080893,-108.90675,1.585)); +#159436 = LINE('',#159437,#159438); +#159437 = CARTESIAN_POINT('',(187.111125,-108.920256,1.585)); +#159438 = VECTOR('',#159439,1.); +#159439 = DIRECTION('',(-0.913030248774,0.407891854324,0.)); +#159440 = ORIENTED_EDGE('',*,*,#159441,.T.); +#159441 = EDGE_CURVE('',#159434,#159442,#159444,.T.); +#159442 = VERTEX_POINT('',#159443); +#159443 = CARTESIAN_POINT('',(186.994029,-108.910279,1.585)); +#159444 = CIRCLE('',#159445,7.22639760609E-02); +#159445 = AXIS2_PLACEMENT_3D('',#159446,#159447,#159448); +#159446 = CARTESIAN_POINT('',(187.03511759538,-108.8508331459,1.585)); +#159447 = DIRECTION('',(-0.,0.,-1.)); +#159448 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#159449 = ORIENTED_EDGE('',*,*,#159450,.T.); +#159450 = EDGE_CURVE('',#159442,#159451,#159453,.T.); +#159451 = VERTEX_POINT('',#159452); +#159452 = CARTESIAN_POINT('',(186.973337,-108.889587,1.585)); +#159453 = LINE('',#159454,#159455); +#159454 = CARTESIAN_POINT('',(186.994029,-108.910279,1.585)); +#159455 = VECTOR('',#159456,1.); +#159456 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#159457 = ORIENTED_EDGE('',*,*,#159458,.T.); +#159458 = EDGE_CURVE('',#159451,#159459,#159461,.T.); +#159459 = VERTEX_POINT('',#159460); +#159460 = CARTESIAN_POINT('',(186.960697,-108.847919,1.585)); +#159461 = LINE('',#159462,#159463); +#159462 = CARTESIAN_POINT('',(186.973337,-108.889587,1.585)); +#159463 = VECTOR('',#159464,1.); +#159464 = DIRECTION('',(-0.290287839989,0.956939376321,0.)); +#159465 = ORIENTED_EDGE('',*,*,#159466,.T.); +#159466 = EDGE_CURVE('',#159459,#159467,#159469,.T.); +#159467 = VERTEX_POINT('',#159468); +#159468 = CARTESIAN_POINT('',(186.962138,-107.833287,1.585)); +#159469 = LINE('',#159470,#159471); +#159470 = CARTESIAN_POINT('',(186.960697,-108.847919,1.585)); +#159471 = VECTOR('',#159472,1.); +#159472 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#159473 = ORIENTED_EDGE('',*,*,#159474,.T.); +#159474 = EDGE_CURVE('',#159467,#159342,#159475,.T.); +#159475 = LINE('',#159476,#159477); +#159476 = CARTESIAN_POINT('',(186.962138,-107.833287,1.585)); +#159477 = VECTOR('',#159478,1.); +#159478 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#159479 = FACE_BOUND('',#159480,.F.); +#159480 = EDGE_LOOP('',(#159481,#159492,#159500,#159508,#159516,#159524, + #159532,#159541)); +#159481 = ORIENTED_EDGE('',*,*,#159482,.T.); +#159482 = EDGE_CURVE('',#159483,#159485,#159487,.T.); +#159483 = VERTEX_POINT('',#159484); +#159484 = CARTESIAN_POINT('',(187.436887,-108.389433,1.585)); +#159485 = VERTEX_POINT('',#159486); +#159486 = CARTESIAN_POINT('',(187.303706,-108.256252,1.585)); +#159487 = CIRCLE('',#159488,0.18686440374); +#159488 = AXIS2_PLACEMENT_3D('',#159489,#159490,#159491); +#159489 = CARTESIAN_POINT('',(187.25617,-108.436969,1.585)); +#159490 = DIRECTION('',(0.,0.,1.)); +#159491 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#159492 = ORIENTED_EDGE('',*,*,#159493,.T.); +#159493 = EDGE_CURVE('',#159485,#159494,#159496,.T.); +#159494 = VERTEX_POINT('',#159495); +#159495 = CARTESIAN_POINT('',(187.14864,-108.256252,1.585)); +#159496 = LINE('',#159497,#159498); +#159497 = CARTESIAN_POINT('',(187.303706,-108.256252,1.585)); +#159498 = VECTOR('',#159499,1.); +#159499 = DIRECTION('',(-1.,0.,0.)); +#159500 = ORIENTED_EDGE('',*,*,#159501,.T.); +#159501 = EDGE_CURVE('',#159494,#159502,#159504,.T.); +#159502 = VERTEX_POINT('',#159503); +#159503 = CARTESIAN_POINT('',(187.110697,-108.275223,1.585)); +#159504 = LINE('',#159505,#159506); +#159505 = CARTESIAN_POINT('',(187.14864,-108.256252,1.585)); +#159506 = VECTOR('',#159507,1.); +#159507 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#159508 = ORIENTED_EDGE('',*,*,#159509,.T.); +#159509 = EDGE_CURVE('',#159502,#159510,#159512,.T.); +#159510 = VERTEX_POINT('',#159511); +#159511 = CARTESIAN_POINT('',(187.110697,-108.753947,1.585)); +#159512 = LINE('',#159513,#159514); +#159513 = CARTESIAN_POINT('',(187.110697,-108.275223,1.585)); +#159514 = VECTOR('',#159515,1.); +#159515 = DIRECTION('',(0.,-1.,0.)); +#159516 = ORIENTED_EDGE('',*,*,#159517,.T.); +#159517 = EDGE_CURVE('',#159510,#159518,#159520,.T.); +#159518 = VERTEX_POINT('',#159519); +#159519 = CARTESIAN_POINT('',(187.14864,-108.772919,1.585)); +#159520 = LINE('',#159521,#159522); +#159521 = CARTESIAN_POINT('',(187.110697,-108.753947,1.585)); +#159522 = VECTOR('',#159523,1.); +#159523 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#159524 = ORIENTED_EDGE('',*,*,#159525,.T.); +#159525 = EDGE_CURVE('',#159518,#159526,#159528,.T.); +#159526 = VERTEX_POINT('',#159527); +#159527 = CARTESIAN_POINT('',(187.303706,-108.772919,1.585)); +#159528 = LINE('',#159529,#159530); +#159529 = CARTESIAN_POINT('',(187.14864,-108.772919,1.585)); +#159530 = VECTOR('',#159531,1.); +#159531 = DIRECTION('',(1.,0.,0.)); +#159532 = ORIENTED_EDGE('',*,*,#159533,.T.); +#159533 = EDGE_CURVE('',#159526,#159534,#159536,.T.); +#159534 = VERTEX_POINT('',#159535); +#159535 = CARTESIAN_POINT('',(187.436887,-108.639737,1.585)); +#159536 = CIRCLE('',#159537,0.186867760544); +#159537 = AXIS2_PLACEMENT_3D('',#159538,#159539,#159540); +#159538 = CARTESIAN_POINT('',(187.25616696928,-108.5921993262,1.585)); +#159539 = DIRECTION('',(0.,0.,1.)); +#159540 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#159541 = ORIENTED_EDGE('',*,*,#159542,.T.); +#159542 = EDGE_CURVE('',#159534,#159483,#159543,.T.); +#159543 = LINE('',#159544,#159545); +#159544 = CARTESIAN_POINT('',(187.436887,-108.639737,1.585)); +#159545 = VECTOR('',#159546,1.); +#159546 = DIRECTION('',(0.,1.,0.)); +#159547 = PLANE('',#159548); +#159548 = AXIS2_PLACEMENT_3D('',#159549,#159550,#159551); +#159549 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159550 = DIRECTION('',(0.,0.,1.)); +#159551 = DIRECTION('',(1.,0.,-0.)); +#159552 = SHELL_BASED_SURFACE_MODEL('',(#159553)); +#159553 = OPEN_SHELL('',(#159554)); +#159554 = ADVANCED_FACE('',(#159555),#159840,.T.); +#159555 = FACE_BOUND('',#159556,.F.); +#159556 = EDGE_LOOP('',(#159557,#159567,#159575,#159583,#159592,#159600, + #159608,#159616,#159624,#159632,#159640,#159648,#159656,#159664, + #159672,#159680,#159688,#159696,#159704,#159713,#159721,#159730, + #159738,#159746,#159754,#159762,#159770,#159778,#159786,#159794, + #159802,#159810,#159818,#159826,#159834)); +#159557 = ORIENTED_EDGE('',*,*,#159558,.T.); +#159558 = EDGE_CURVE('',#159559,#159561,#159563,.T.); +#159559 = VERTEX_POINT('',#159560); +#159560 = CARTESIAN_POINT('',(187.906918,-108.161789,1.585)); +#159561 = VERTEX_POINT('',#159562); +#159562 = CARTESIAN_POINT('',(188.021065,-108.107693,1.585)); +#159563 = LINE('',#159564,#159565); +#159564 = CARTESIAN_POINT('',(187.906918,-108.161789,1.585)); +#159565 = VECTOR('',#159566,1.); +#159566 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#159567 = ORIENTED_EDGE('',*,*,#159568,.T.); +#159568 = EDGE_CURVE('',#159561,#159569,#159571,.T.); +#159569 = VERTEX_POINT('',#159570); +#159570 = CARTESIAN_POINT('',(188.193186,-108.107693,1.585)); +#159571 = LINE('',#159572,#159573); +#159572 = CARTESIAN_POINT('',(188.021065,-108.107693,1.585)); +#159573 = VECTOR('',#159574,1.); +#159574 = DIRECTION('',(1.,0.,0.)); +#159575 = ORIENTED_EDGE('',*,*,#159576,.T.); +#159576 = EDGE_CURVE('',#159569,#159577,#159579,.T.); +#159577 = VERTEX_POINT('',#159578); +#159578 = CARTESIAN_POINT('',(188.319776,-108.169621,1.585)); +#159579 = LINE('',#159580,#159581); +#159580 = CARTESIAN_POINT('',(188.193186,-108.107693,1.585)); +#159581 = VECTOR('',#159582,1.); +#159582 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#159583 = ORIENTED_EDGE('',*,*,#159584,.T.); +#159584 = EDGE_CURVE('',#159577,#159585,#159587,.T.); +#159585 = VERTEX_POINT('',#159586); +#159586 = CARTESIAN_POINT('',(188.240251,-108.295953,1.585)); +#159587 = CIRCLE('',#159588,7.500029440361E-02); +#159588 = AXIS2_PLACEMENT_3D('',#159589,#159590,#159591); +#159589 = CARTESIAN_POINT('',(188.27379205397,-108.2288706486,1.585)); +#159590 = DIRECTION('',(0.,0.,-1.)); +#159591 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#159592 = ORIENTED_EDGE('',*,*,#159593,.T.); +#159593 = EDGE_CURVE('',#159585,#159594,#159596,.T.); +#159594 = VERTEX_POINT('',#159595); +#159595 = CARTESIAN_POINT('',(188.160849,-108.256252,1.585)); +#159596 = LINE('',#159597,#159598); +#159597 = CARTESIAN_POINT('',(188.240251,-108.295953,1.585)); +#159598 = VECTOR('',#159599,1.); +#159599 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#159600 = ORIENTED_EDGE('',*,*,#159601,.T.); +#159601 = EDGE_CURVE('',#159594,#159602,#159604,.T.); +#159602 = VERTEX_POINT('',#159603); +#159603 = CARTESIAN_POINT('',(188.053402,-108.256252,1.585)); +#159604 = LINE('',#159605,#159606); +#159605 = CARTESIAN_POINT('',(188.160849,-108.256252,1.585)); +#159606 = VECTOR('',#159607,1.); +#159607 = DIRECTION('',(-1.,0.,0.)); +#159608 = ORIENTED_EDGE('',*,*,#159609,.T.); +#159609 = EDGE_CURVE('',#159602,#159610,#159612,.T.); +#159610 = VERTEX_POINT('',#159611); +#159611 = CARTESIAN_POINT('',(187.99636,-108.284772,1.585)); +#159612 = LINE('',#159613,#159614); +#159613 = CARTESIAN_POINT('',(188.053402,-108.256252,1.585)); +#159614 = VECTOR('',#159615,1.); +#159615 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#159616 = ORIENTED_EDGE('',*,*,#159617,.T.); +#159617 = EDGE_CURVE('',#159610,#159618,#159620,.T.); +#159618 = VERTEX_POINT('',#159619); +#159619 = CARTESIAN_POINT('',(187.96784,-108.341814,1.585)); +#159620 = LINE('',#159621,#159622); +#159621 = CARTESIAN_POINT('',(187.99636,-108.284772,1.585)); +#159622 = VECTOR('',#159623,1.); +#159623 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#159624 = ORIENTED_EDGE('',*,*,#159625,.T.); +#159625 = EDGE_CURVE('',#159618,#159626,#159628,.T.); +#159626 = VERTEX_POINT('',#159627); +#159627 = CARTESIAN_POINT('',(187.96784,-108.354023,1.585)); +#159628 = LINE('',#159629,#159630); +#159629 = CARTESIAN_POINT('',(187.96784,-108.341814,1.585)); +#159630 = VECTOR('',#159631,1.); +#159631 = DIRECTION('',(0.,-1.,0.)); +#159632 = ORIENTED_EDGE('',*,*,#159633,.T.); +#159633 = EDGE_CURVE('',#159626,#159634,#159636,.T.); +#159634 = VERTEX_POINT('',#159635); +#159635 = CARTESIAN_POINT('',(187.99636,-108.411064,1.585)); +#159636 = LINE('',#159637,#159638); +#159637 = CARTESIAN_POINT('',(187.96784,-108.354023,1.585)); +#159638 = VECTOR('',#159639,1.); +#159639 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#159640 = ORIENTED_EDGE('',*,*,#159641,.T.); +#159641 = EDGE_CURVE('',#159634,#159642,#159644,.T.); +#159642 = VERTEX_POINT('',#159643); +#159643 = CARTESIAN_POINT('',(188.053402,-108.439585,1.585)); +#159644 = LINE('',#159645,#159646); +#159645 = CARTESIAN_POINT('',(187.99636,-108.411064,1.585)); +#159646 = VECTOR('',#159647,1.); +#159647 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#159648 = ORIENTED_EDGE('',*,*,#159649,.T.); +#159649 = EDGE_CURVE('',#159642,#159650,#159652,.T.); +#159650 = VERTEX_POINT('',#159651); +#159651 = CARTESIAN_POINT('',(188.198363,-108.442248,1.585)); +#159652 = LINE('',#159653,#159654); +#159653 = CARTESIAN_POINT('',(188.053402,-108.439585,1.585)); +#159654 = VECTOR('',#159655,1.); +#159655 = DIRECTION('',(0.999831305828,-1.836735927203E-02,0.)); +#159656 = ORIENTED_EDGE('',*,*,#159657,.T.); +#159657 = EDGE_CURVE('',#159650,#159658,#159660,.T.); +#159658 = VERTEX_POINT('',#159659); +#159659 = CARTESIAN_POINT('',(188.319776,-108.502954,1.585)); +#159660 = LINE('',#159661,#159662); +#159661 = CARTESIAN_POINT('',(188.198363,-108.442248,1.585)); +#159662 = VECTOR('',#159663,1.); +#159663 = DIRECTION('',(0.894428664361,-0.447210648766,0.)); +#159664 = ORIENTED_EDGE('',*,*,#159665,.T.); +#159665 = EDGE_CURVE('',#159658,#159666,#159668,.T.); +#159666 = VERTEX_POINT('',#159667); +#159667 = CARTESIAN_POINT('',(188.340874,-108.528663,1.585)); +#159668 = LINE('',#159669,#159670); +#159669 = CARTESIAN_POINT('',(188.319776,-108.502954,1.585)); +#159670 = VECTOR('',#159671,1.); +#159671 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#159672 = ORIENTED_EDGE('',*,*,#159673,.T.); +#159673 = EDGE_CURVE('',#159666,#159674,#159676,.T.); +#159674 = VERTEX_POINT('',#159675); +#159675 = CARTESIAN_POINT('',(188.39497,-108.64281,1.585)); +#159676 = LINE('',#159677,#159678); +#159677 = CARTESIAN_POINT('',(188.340874,-108.528663,1.585)); +#159678 = VECTOR('',#159679,1.); +#159679 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#159680 = ORIENTED_EDGE('',*,*,#159681,.T.); +#159681 = EDGE_CURVE('',#159674,#159682,#159684,.T.); +#159682 = VERTEX_POINT('',#159683); +#159683 = CARTESIAN_POINT('',(188.393748,-108.72487,1.585)); +#159684 = LINE('',#159685,#159686); +#159685 = CARTESIAN_POINT('',(188.39497,-108.64281,1.585)); +#159686 = VECTOR('',#159687,1.); +#159687 = DIRECTION('',(-1.488989188859E-02,-0.999889139415,0.)); +#159688 = ORIENTED_EDGE('',*,*,#159689,.T.); +#159689 = EDGE_CURVE('',#159682,#159690,#159692,.T.); +#159690 = VERTEX_POINT('',#159691); +#159691 = CARTESIAN_POINT('',(188.333042,-108.846284,1.585)); +#159692 = LINE('',#159693,#159694); +#159693 = CARTESIAN_POINT('',(188.393748,-108.72487,1.585)); +#159694 = VECTOR('',#159695,1.); +#159695 = DIRECTION('',(-0.447207702067,-0.894430137692,0.)); +#159696 = ORIENTED_EDGE('',*,*,#159697,.T.); +#159697 = EDGE_CURVE('',#159690,#159698,#159700,.T.); +#159698 = VERTEX_POINT('',#159699); +#159699 = CARTESIAN_POINT('',(188.307333,-108.867382,1.585)); +#159700 = LINE('',#159701,#159702); +#159701 = CARTESIAN_POINT('',(188.333042,-108.846284,1.585)); +#159702 = VECTOR('',#159703,1.); +#159703 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#159704 = ORIENTED_EDGE('',*,*,#159705,.T.); +#159705 = EDGE_CURVE('',#159698,#159706,#159708,.T.); +#159706 = VERTEX_POINT('',#159707); +#159707 = CARTESIAN_POINT('',(187.846856,-108.85955,1.585)); +#159708 = CIRCLE('',#159709,0.396588066051); +#159709 = AXIS2_PLACEMENT_3D('',#159710,#159711,#159712); +#159710 = CARTESIAN_POINT('',(188.08258553893,-108.54062418,1.585)); +#159711 = DIRECTION('',(-0.,0.,-1.)); +#159712 = DIRECTION('',(0.566702531691,-0.82392247243,-0.)); +#159713 = ORIENTED_EDGE('',*,*,#159714,.T.); +#159714 = EDGE_CURVE('',#159706,#159715,#159717,.T.); +#159715 = VERTEX_POINT('',#159716); +#159716 = CARTESIAN_POINT('',(187.827683,-108.837442,1.585)); +#159717 = LINE('',#159718,#159719); +#159718 = CARTESIAN_POINT('',(187.846856,-108.85955,1.585)); +#159719 = VECTOR('',#159720,1.); +#159720 = DIRECTION('',(-0.655178986933,0.755473689205,0.)); +#159721 = ORIENTED_EDGE('',*,*,#159722,.T.); +#159722 = EDGE_CURVE('',#159715,#159723,#159725,.T.); +#159723 = VERTEX_POINT('',#159724); +#159724 = CARTESIAN_POINT('',(187.926381,-108.733218,1.585)); +#159725 = CIRCLE('',#159726,7.499954050661E-02); +#159726 = AXIS2_PLACEMENT_3D('',#159727,#159728,#159729); +#159727 = CARTESIAN_POINT('',(187.89283928896,-108.8002991799,1.585)); +#159728 = DIRECTION('',(0.,0.,-1.)); +#159729 = DIRECTION('',(-0.868755841989,-0.495240635459,-0.)); +#159730 = ORIENTED_EDGE('',*,*,#159731,.T.); +#159731 = EDGE_CURVE('',#159723,#159732,#159734,.T.); +#159732 = VERTEX_POINT('',#159733); +#159733 = CARTESIAN_POINT('',(188.005783,-108.772919,1.585)); +#159734 = LINE('',#159735,#159736); +#159735 = CARTESIAN_POINT('',(187.926381,-108.733218,1.585)); +#159736 = VECTOR('',#159737,1.); +#159737 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#159738 = ORIENTED_EDGE('',*,*,#159739,.T.); +#159739 = EDGE_CURVE('',#159732,#159740,#159742,.T.); +#159740 = VERTEX_POINT('',#159741); +#159741 = CARTESIAN_POINT('',(188.160849,-108.772919,1.585)); +#159742 = LINE('',#159743,#159744); +#159743 = CARTESIAN_POINT('',(188.005783,-108.772919,1.585)); +#159744 = VECTOR('',#159745,1.); +#159745 = DIRECTION('',(1.,0.,0.)); +#159746 = ORIENTED_EDGE('',*,*,#159747,.T.); +#159747 = EDGE_CURVE('',#159740,#159748,#159750,.T.); +#159748 = VERTEX_POINT('',#159749); +#159749 = CARTESIAN_POINT('',(188.21789,-108.744398,1.585)); +#159750 = LINE('',#159751,#159752); +#159751 = CARTESIAN_POINT('',(188.160849,-108.772919,1.585)); +#159752 = VECTOR('',#159753,1.); +#159753 = DIRECTION('',(0.894424054904,0.447219867637,0.)); +#159754 = ORIENTED_EDGE('',*,*,#159755,.T.); +#159755 = EDGE_CURVE('',#159748,#159756,#159758,.T.); +#159756 = VERTEX_POINT('',#159757); +#159757 = CARTESIAN_POINT('',(188.246411,-108.687356,1.585)); +#159758 = LINE('',#159759,#159760); +#159759 = CARTESIAN_POINT('',(188.21789,-108.744398,1.585)); +#159760 = VECTOR('',#159761,1.); +#159761 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#159762 = ORIENTED_EDGE('',*,*,#159763,.T.); +#159763 = EDGE_CURVE('',#159756,#159764,#159766,.T.); +#159764 = VERTEX_POINT('',#159765); +#159765 = CARTESIAN_POINT('',(188.246411,-108.675147,1.585)); +#159766 = LINE('',#159767,#159768); +#159767 = CARTESIAN_POINT('',(188.246411,-108.687356,1.585)); +#159768 = VECTOR('',#159769,1.); +#159769 = DIRECTION('',(0.,1.,0.)); +#159770 = ORIENTED_EDGE('',*,*,#159771,.T.); +#159771 = EDGE_CURVE('',#159764,#159772,#159774,.T.); +#159772 = VERTEX_POINT('',#159773); +#159773 = CARTESIAN_POINT('',(188.21789,-108.618105,1.585)); +#159774 = LINE('',#159775,#159776); +#159775 = CARTESIAN_POINT('',(188.246411,-108.675147,1.585)); +#159776 = VECTOR('',#159777,1.); +#159777 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#159778 = ORIENTED_EDGE('',*,*,#159779,.T.); +#159779 = EDGE_CURVE('',#159772,#159780,#159782,.T.); +#159780 = VERTEX_POINT('',#159781); +#159781 = CARTESIAN_POINT('',(188.160849,-108.589585,1.585)); +#159782 = LINE('',#159783,#159784); +#159783 = CARTESIAN_POINT('',(188.21789,-108.618105,1.585)); +#159784 = VECTOR('',#159785,1.); +#159785 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#159786 = ORIENTED_EDGE('',*,*,#159787,.T.); +#159787 = EDGE_CURVE('',#159780,#159788,#159790,.T.); +#159788 = VERTEX_POINT('',#159789); +#159789 = CARTESIAN_POINT('',(188.015887,-108.586922,1.585)); +#159790 = LINE('',#159791,#159792); +#159791 = CARTESIAN_POINT('',(188.160849,-108.589585,1.585)); +#159792 = VECTOR('',#159793,1.); +#159793 = DIRECTION('',(-0.999831308155,1.836723261002E-02,0.)); +#159794 = ORIENTED_EDGE('',*,*,#159795,.T.); +#159795 = EDGE_CURVE('',#159788,#159796,#159798,.T.); +#159796 = VERTEX_POINT('',#159797); +#159797 = CARTESIAN_POINT('',(187.894475,-108.526216,1.585)); +#159798 = LINE('',#159799,#159800); +#159799 = CARTESIAN_POINT('',(188.015887,-108.586922,1.585)); +#159800 = VECTOR('',#159801,1.); +#159801 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#159802 = ORIENTED_EDGE('',*,*,#159803,.T.); +#159803 = EDGE_CURVE('',#159796,#159804,#159806,.T.); +#159804 = VERTEX_POINT('',#159805); +#159805 = CARTESIAN_POINT('',(187.873377,-108.500507,1.585)); +#159806 = LINE('',#159807,#159808); +#159807 = CARTESIAN_POINT('',(187.894475,-108.526216,1.585)); +#159808 = VECTOR('',#159809,1.); +#159809 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#159810 = ORIENTED_EDGE('',*,*,#159811,.T.); +#159811 = EDGE_CURVE('',#159804,#159812,#159814,.T.); +#159812 = VERTEX_POINT('',#159813); +#159813 = CARTESIAN_POINT('',(187.819281,-108.38636,1.585)); +#159814 = LINE('',#159815,#159816); +#159815 = CARTESIAN_POINT('',(187.873377,-108.500507,1.585)); +#159816 = VECTOR('',#159817,1.); +#159817 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#159818 = ORIENTED_EDGE('',*,*,#159819,.T.); +#159819 = EDGE_CURVE('',#159812,#159820,#159822,.T.); +#159820 = VERTEX_POINT('',#159821); +#159821 = CARTESIAN_POINT('',(187.820503,-108.3043,1.585)); +#159822 = LINE('',#159823,#159824); +#159823 = CARTESIAN_POINT('',(187.819281,-108.38636,1.585)); +#159824 = VECTOR('',#159825,1.); +#159825 = DIRECTION('',(1.488989188859E-02,0.999889139415,0.)); +#159826 = ORIENTED_EDGE('',*,*,#159827,.T.); +#159827 = EDGE_CURVE('',#159820,#159828,#159830,.T.); +#159828 = VERTEX_POINT('',#159829); +#159829 = CARTESIAN_POINT('',(187.881209,-108.182887,1.585)); +#159830 = LINE('',#159831,#159832); +#159831 = CARTESIAN_POINT('',(187.820503,-108.3043,1.585)); +#159832 = VECTOR('',#159833,1.); +#159833 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#159834 = ORIENTED_EDGE('',*,*,#159835,.T.); +#159835 = EDGE_CURVE('',#159828,#159559,#159836,.T.); +#159836 = LINE('',#159837,#159838); +#159837 = CARTESIAN_POINT('',(187.881209,-108.182887,1.585)); +#159838 = VECTOR('',#159839,1.); +#159839 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#159840 = PLANE('',#159841); +#159841 = AXIS2_PLACEMENT_3D('',#159842,#159843,#159844); +#159842 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159843 = DIRECTION('',(0.,0.,1.)); +#159844 = DIRECTION('',(1.,0.,-0.)); +#159845 = SHELL_BASED_SURFACE_MODEL('',(#159846)); +#159846 = OPEN_SHELL('',(#159847)); +#159847 = ADVANCED_FACE('',(#159848,#159859),#159870,.T.); +#159848 = FACE_BOUND('',#159849,.T.); +#159849 = EDGE_LOOP('',(#159850)); +#159850 = ORIENTED_EDGE('',*,*,#159851,.T.); +#159851 = EDGE_CURVE('',#159852,#159852,#159854,.T.); +#159852 = VERTEX_POINT('',#159853); +#159853 = CARTESIAN_POINT('',(114.20165,-107.3231,1.585)); +#159854 = CIRCLE('',#159855,1.01); +#159855 = AXIS2_PLACEMENT_3D('',#159856,#159857,#159858); +#159856 = CARTESIAN_POINT('',(113.19165,-107.3231,1.585)); +#159857 = DIRECTION('',(0.,0.,1.)); +#159858 = DIRECTION('',(1.,0.,-0.)); +#159859 = FACE_BOUND('',#159860,.F.); +#159860 = EDGE_LOOP('',(#159861)); +#159861 = ORIENTED_EDGE('',*,*,#159862,.T.); +#159862 = EDGE_CURVE('',#159863,#159863,#159865,.T.); +#159863 = VERTEX_POINT('',#159864); +#159864 = CARTESIAN_POINT('',(114.085955,-107.3231,1.585)); +#159865 = CIRCLE('',#159866,0.894305); +#159866 = AXIS2_PLACEMENT_3D('',#159867,#159868,#159869); +#159867 = CARTESIAN_POINT('',(113.19165,-107.3231,1.585)); +#159868 = DIRECTION('',(0.,0.,1.)); +#159869 = DIRECTION('',(1.,0.,-0.)); +#159870 = PLANE('',#159871); +#159871 = AXIS2_PLACEMENT_3D('',#159872,#159873,#159874); +#159872 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159873 = DIRECTION('',(0.,0.,1.)); +#159874 = DIRECTION('',(1.,0.,-0.)); +#159875 = SHELL_BASED_SURFACE_MODEL('',(#159876)); +#159876 = OPEN_SHELL('',(#159877)); +#159877 = ADVANCED_FACE('',(#159878),#159914,.T.); +#159878 = FACE_BOUND('',#159879,.F.); +#159879 = EDGE_LOOP('',(#159880,#159891,#159899,#159908)); +#159880 = ORIENTED_EDGE('',*,*,#159881,.T.); +#159881 = EDGE_CURVE('',#159882,#159884,#159886,.T.); +#159882 = VERTEX_POINT('',#159883); +#159883 = CARTESIAN_POINT('',(97.629392,-107.9056,1.585)); +#159884 = VERTEX_POINT('',#159885); +#159885 = CARTESIAN_POINT('',(97.629392,-107.7856,1.585)); +#159886 = CIRCLE('',#159887,6.000000000043E-02); +#159887 = AXIS2_PLACEMENT_3D('',#159888,#159889,#159890); +#159888 = CARTESIAN_POINT('',(97.629391774412,-107.8456,1.585)); +#159889 = DIRECTION('',(0.,0.,-1.)); +#159890 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#159891 = ORIENTED_EDGE('',*,*,#159892,.T.); +#159892 = EDGE_CURVE('',#159884,#159893,#159895,.T.); +#159893 = VERTEX_POINT('',#159894); +#159894 = CARTESIAN_POINT('',(98.103908,-107.7856,1.585)); +#159895 = LINE('',#159896,#159897); +#159896 = CARTESIAN_POINT('',(97.629392,-107.7856,1.585)); +#159897 = VECTOR('',#159898,1.); +#159898 = DIRECTION('',(1.,0.,0.)); +#159899 = ORIENTED_EDGE('',*,*,#159900,.T.); +#159900 = EDGE_CURVE('',#159893,#159901,#159903,.T.); +#159901 = VERTEX_POINT('',#159902); +#159902 = CARTESIAN_POINT('',(98.103908,-107.9056,1.585)); +#159903 = CIRCLE('',#159904,6.000000000043E-02); +#159904 = AXIS2_PLACEMENT_3D('',#159905,#159906,#159907); +#159905 = CARTESIAN_POINT('',(98.103908225588,-107.8456,1.585)); +#159906 = DIRECTION('',(0.,0.,-1.)); +#159907 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#159908 = ORIENTED_EDGE('',*,*,#159909,.T.); +#159909 = EDGE_CURVE('',#159901,#159882,#159910,.T.); +#159910 = LINE('',#159911,#159912); +#159911 = CARTESIAN_POINT('',(98.103908,-107.9056,1.585)); +#159912 = VECTOR('',#159913,1.); +#159913 = DIRECTION('',(-1.,0.,0.)); +#159914 = PLANE('',#159915); +#159915 = AXIS2_PLACEMENT_3D('',#159916,#159917,#159918); +#159916 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159917 = DIRECTION('',(0.,0.,1.)); +#159918 = DIRECTION('',(1.,0.,-0.)); +#159919 = SHELL_BASED_SURFACE_MODEL('',(#159920)); +#159920 = OPEN_SHELL('',(#159921)); +#159921 = ADVANCED_FACE('',(#159922),#159958,.T.); +#159922 = FACE_BOUND('',#159923,.F.); +#159923 = EDGE_LOOP('',(#159924,#159935,#159943,#159952)); +#159924 = ORIENTED_EDGE('',*,*,#159925,.T.); +#159925 = EDGE_CURVE('',#159926,#159928,#159930,.T.); +#159926 = VERTEX_POINT('',#159927); +#159927 = CARTESIAN_POINT('',(101.629392,-107.9056,1.585)); +#159928 = VERTEX_POINT('',#159929); +#159929 = CARTESIAN_POINT('',(101.629392,-107.7856,1.585)); +#159930 = CIRCLE('',#159931,6.000000000043E-02); +#159931 = AXIS2_PLACEMENT_3D('',#159932,#159933,#159934); +#159932 = CARTESIAN_POINT('',(101.62939177441,-107.8456,1.585)); +#159933 = DIRECTION('',(0.,0.,-1.)); +#159934 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#159935 = ORIENTED_EDGE('',*,*,#159936,.T.); +#159936 = EDGE_CURVE('',#159928,#159937,#159939,.T.); +#159937 = VERTEX_POINT('',#159938); +#159938 = CARTESIAN_POINT('',(102.103908,-107.7856,1.585)); +#159939 = LINE('',#159940,#159941); +#159940 = CARTESIAN_POINT('',(101.629392,-107.7856,1.585)); +#159941 = VECTOR('',#159942,1.); +#159942 = DIRECTION('',(1.,0.,0.)); +#159943 = ORIENTED_EDGE('',*,*,#159944,.T.); +#159944 = EDGE_CURVE('',#159937,#159945,#159947,.T.); +#159945 = VERTEX_POINT('',#159946); +#159946 = CARTESIAN_POINT('',(102.103908,-107.9056,1.585)); +#159947 = CIRCLE('',#159948,6.000000000043E-02); +#159948 = AXIS2_PLACEMENT_3D('',#159949,#159950,#159951); +#159949 = CARTESIAN_POINT('',(102.10390822558,-107.8456,1.585)); +#159950 = DIRECTION('',(0.,0.,-1.)); +#159951 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#159952 = ORIENTED_EDGE('',*,*,#159953,.T.); +#159953 = EDGE_CURVE('',#159945,#159926,#159954,.T.); +#159954 = LINE('',#159955,#159956); +#159955 = CARTESIAN_POINT('',(102.103908,-107.9056,1.585)); +#159956 = VECTOR('',#159957,1.); +#159957 = DIRECTION('',(-1.,0.,0.)); +#159958 = PLANE('',#159959); +#159959 = AXIS2_PLACEMENT_3D('',#159960,#159961,#159962); +#159960 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159961 = DIRECTION('',(0.,0.,1.)); +#159962 = DIRECTION('',(1.,0.,-0.)); +#159963 = SHELL_BASED_SURFACE_MODEL('',(#159964)); +#159964 = OPEN_SHELL('',(#159965)); +#159965 = ADVANCED_FACE('',(#159966),#160002,.T.); +#159966 = FACE_BOUND('',#159967,.F.); +#159967 = EDGE_LOOP('',(#159968,#159979,#159987,#159996)); +#159968 = ORIENTED_EDGE('',*,*,#159969,.T.); +#159969 = EDGE_CURVE('',#159970,#159972,#159974,.T.); +#159970 = VERTEX_POINT('',#159971); +#159971 = CARTESIAN_POINT('',(105.629392,-107.9056,1.585)); +#159972 = VERTEX_POINT('',#159973); +#159973 = CARTESIAN_POINT('',(105.629392,-107.7856,1.585)); +#159974 = CIRCLE('',#159975,6.000000000043E-02); +#159975 = AXIS2_PLACEMENT_3D('',#159976,#159977,#159978); +#159976 = CARTESIAN_POINT('',(105.62939177441,-107.8456,1.585)); +#159977 = DIRECTION('',(0.,0.,-1.)); +#159978 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#159979 = ORIENTED_EDGE('',*,*,#159980,.T.); +#159980 = EDGE_CURVE('',#159972,#159981,#159983,.T.); +#159981 = VERTEX_POINT('',#159982); +#159982 = CARTESIAN_POINT('',(106.103908,-107.7856,1.585)); +#159983 = LINE('',#159984,#159985); +#159984 = CARTESIAN_POINT('',(105.629392,-107.7856,1.585)); +#159985 = VECTOR('',#159986,1.); +#159986 = DIRECTION('',(1.,0.,0.)); +#159987 = ORIENTED_EDGE('',*,*,#159988,.T.); +#159988 = EDGE_CURVE('',#159981,#159989,#159991,.T.); +#159989 = VERTEX_POINT('',#159990); +#159990 = CARTESIAN_POINT('',(106.103908,-107.9056,1.585)); +#159991 = CIRCLE('',#159992,6.000000000043E-02); +#159992 = AXIS2_PLACEMENT_3D('',#159993,#159994,#159995); +#159993 = CARTESIAN_POINT('',(106.10390822558,-107.8456,1.585)); +#159994 = DIRECTION('',(0.,0.,-1.)); +#159995 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#159996 = ORIENTED_EDGE('',*,*,#159997,.T.); +#159997 = EDGE_CURVE('',#159989,#159970,#159998,.T.); +#159998 = LINE('',#159999,#160000); +#159999 = CARTESIAN_POINT('',(106.103908,-107.9056,1.585)); +#160000 = VECTOR('',#160001,1.); +#160001 = DIRECTION('',(-1.,0.,0.)); +#160002 = PLANE('',#160003); +#160003 = AXIS2_PLACEMENT_3D('',#160004,#160005,#160006); +#160004 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160005 = DIRECTION('',(0.,0.,1.)); +#160006 = DIRECTION('',(1.,0.,-0.)); +#160007 = SHELL_BASED_SURFACE_MODEL('',(#160008)); +#160008 = OPEN_SHELL('',(#160009)); +#160009 = ADVANCED_FACE('',(#160010),#160046,.T.); +#160010 = FACE_BOUND('',#160011,.F.); +#160011 = EDGE_LOOP('',(#160012,#160023,#160031,#160040)); +#160012 = ORIENTED_EDGE('',*,*,#160013,.T.); +#160013 = EDGE_CURVE('',#160014,#160016,#160018,.T.); +#160014 = VERTEX_POINT('',#160015); +#160015 = CARTESIAN_POINT('',(179.279392,-107.9056,1.585)); +#160016 = VERTEX_POINT('',#160017); +#160017 = CARTESIAN_POINT('',(179.279392,-107.7856,1.585)); +#160018 = CIRCLE('',#160019,6.000000000043E-02); +#160019 = AXIS2_PLACEMENT_3D('',#160020,#160021,#160022); +#160020 = CARTESIAN_POINT('',(179.27939177441,-107.8456,1.585)); +#160021 = DIRECTION('',(0.,0.,-1.)); +#160022 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#160023 = ORIENTED_EDGE('',*,*,#160024,.T.); +#160024 = EDGE_CURVE('',#160016,#160025,#160027,.T.); +#160025 = VERTEX_POINT('',#160026); +#160026 = CARTESIAN_POINT('',(179.753908,-107.7856,1.585)); +#160027 = LINE('',#160028,#160029); +#160028 = CARTESIAN_POINT('',(179.279392,-107.7856,1.585)); +#160029 = VECTOR('',#160030,1.); +#160030 = DIRECTION('',(1.,0.,0.)); +#160031 = ORIENTED_EDGE('',*,*,#160032,.T.); +#160032 = EDGE_CURVE('',#160025,#160033,#160035,.T.); +#160033 = VERTEX_POINT('',#160034); +#160034 = CARTESIAN_POINT('',(179.753908,-107.9056,1.585)); +#160035 = CIRCLE('',#160036,6.000000000042E-02); +#160036 = AXIS2_PLACEMENT_3D('',#160037,#160038,#160039); +#160037 = CARTESIAN_POINT('',(179.75390822558,-107.8456,1.585)); +#160038 = DIRECTION('',(0.,0.,-1.)); +#160039 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#160040 = ORIENTED_EDGE('',*,*,#160041,.T.); +#160041 = EDGE_CURVE('',#160033,#160014,#160042,.T.); +#160042 = LINE('',#160043,#160044); +#160043 = CARTESIAN_POINT('',(179.753908,-107.9056,1.585)); +#160044 = VECTOR('',#160045,1.); +#160045 = DIRECTION('',(-1.,0.,0.)); +#160046 = PLANE('',#160047); +#160047 = AXIS2_PLACEMENT_3D('',#160048,#160049,#160050); +#160048 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160049 = DIRECTION('',(0.,0.,1.)); +#160050 = DIRECTION('',(1.,0.,-0.)); +#160051 = SHELL_BASED_SURFACE_MODEL('',(#160052)); +#160052 = OPEN_SHELL('',(#160053)); +#160053 = ADVANCED_FACE('',(#160054),#160148,.T.); +#160054 = FACE_BOUND('',#160055,.F.); +#160055 = EDGE_LOOP('',(#160056,#160067,#160075,#160084,#160092,#160101, + #160109,#160118,#160126,#160134,#160142)); +#160056 = ORIENTED_EDGE('',*,*,#160057,.T.); +#160057 = EDGE_CURVE('',#160058,#160060,#160062,.T.); +#160058 = VERTEX_POINT('',#160059); +#160059 = CARTESIAN_POINT('',(93.458717,-106.360139,1.585)); +#160060 = VERTEX_POINT('',#160061); +#160061 = CARTESIAN_POINT('',(93.57415,-106.3831,1.585)); +#160062 = CIRCLE('',#160063,6.000007318648E-02); +#160063 = AXIS2_PLACEMENT_3D('',#160064,#160065,#160066); +#160064 = CARTESIAN_POINT('',(93.514149926814,-106.3830998233,1.585)); +#160065 = DIRECTION('',(0.,0.,-1.)); +#160066 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#160067 = ORIENTED_EDGE('',*,*,#160068,.T.); +#160068 = EDGE_CURVE('',#160060,#160069,#160071,.T.); +#160069 = VERTEX_POINT('',#160070); +#160070 = CARTESIAN_POINT('',(93.57415,-107.3831,1.585)); +#160071 = LINE('',#160072,#160073); +#160072 = CARTESIAN_POINT('',(93.57415,-106.3831,1.585)); +#160073 = VECTOR('',#160074,1.); +#160074 = DIRECTION('',(0.,-1.,0.)); +#160075 = ORIENTED_EDGE('',*,*,#160076,.T.); +#160076 = EDGE_CURVE('',#160069,#160077,#160079,.T.); +#160077 = VERTEX_POINT('',#160078); +#160078 = CARTESIAN_POINT('',(93.51415,-107.4431,1.585)); +#160079 = CIRCLE('',#160080,5.999932016264E-02); +#160080 = AXIS2_PLACEMENT_3D('',#160081,#160082,#160083); +#160081 = CARTESIAN_POINT('',(93.514150679841,-107.3831006798,1.585)); +#160082 = DIRECTION('',(0.,0.,-1.)); +#160083 = DIRECTION('',(0.999999999936,1.133081517402E-05,0.)); +#160084 = ORIENTED_EDGE('',*,*,#160085,.T.); +#160085 = EDGE_CURVE('',#160077,#160086,#160088,.T.); +#160086 = VERTEX_POINT('',#160087); +#160087 = CARTESIAN_POINT('',(91.99415,-107.4431,1.585)); +#160088 = LINE('',#160089,#160090); +#160089 = CARTESIAN_POINT('',(93.51415,-107.4431,1.585)); +#160090 = VECTOR('',#160091,1.); +#160091 = DIRECTION('',(-1.,0.,0.)); +#160092 = ORIENTED_EDGE('',*,*,#160093,.T.); +#160093 = EDGE_CURVE('',#160086,#160094,#160096,.T.); +#160094 = VERTEX_POINT('',#160095); +#160095 = CARTESIAN_POINT('',(91.93415,-107.3831,1.585)); +#160096 = CIRCLE('',#160097,5.999932016257E-02); +#160097 = AXIS2_PLACEMENT_3D('',#160098,#160099,#160100); +#160098 = CARTESIAN_POINT('',(91.994149320159,-107.3831006798,1.585)); +#160099 = DIRECTION('',(0.,0.,-1.)); +#160100 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#160101 = ORIENTED_EDGE('',*,*,#160102,.T.); +#160102 = EDGE_CURVE('',#160094,#160103,#160105,.T.); +#160103 = VERTEX_POINT('',#160104); +#160104 = CARTESIAN_POINT('',(91.93415,-107.3331,1.585)); +#160105 = LINE('',#160106,#160107); +#160106 = CARTESIAN_POINT('',(91.93415,-107.3831,1.585)); +#160107 = VECTOR('',#160108,1.); +#160108 = DIRECTION('',(0.,1.,0.)); +#160109 = ORIENTED_EDGE('',*,*,#160110,.T.); +#160110 = EDGE_CURVE('',#160103,#160111,#160113,.T.); +#160111 = VERTEX_POINT('',#160112); +#160112 = CARTESIAN_POINT('',(92.049583,-107.310139,1.585)); +#160113 = CIRCLE('',#160114,6.000007318647E-02); +#160114 = AXIS2_PLACEMENT_3D('',#160115,#160116,#160117); +#160115 = CARTESIAN_POINT('',(91.994150073186,-107.3330998233,1.585)); +#160116 = DIRECTION('',(0.,0.,-1.)); +#160117 = DIRECTION('',(-0.999999999996,-2.944769485282E-06,-0.)); +#160118 = ORIENTED_EDGE('',*,*,#160119,.T.); +#160119 = EDGE_CURVE('',#160111,#160120,#160122,.T.); +#160120 = VERTEX_POINT('',#160121); +#160121 = CARTESIAN_POINT('',(92.052161,-107.3231,1.585)); +#160122 = LINE('',#160123,#160124); +#160123 = CARTESIAN_POINT('',(92.049583,-107.310139,1.585)); +#160124 = VECTOR('',#160125,1.); +#160125 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#160126 = ORIENTED_EDGE('',*,*,#160127,.T.); +#160127 = EDGE_CURVE('',#160120,#160128,#160130,.T.); +#160128 = VERTEX_POINT('',#160129); +#160129 = CARTESIAN_POINT('',(93.45415,-107.3231,1.585)); +#160130 = LINE('',#160131,#160132); +#160131 = CARTESIAN_POINT('',(92.052161,-107.3231,1.585)); +#160132 = VECTOR('',#160133,1.); +#160133 = DIRECTION('',(1.,0.,0.)); +#160134 = ORIENTED_EDGE('',*,*,#160135,.T.); +#160135 = EDGE_CURVE('',#160128,#160136,#160138,.T.); +#160136 = VERTEX_POINT('',#160137); +#160137 = CARTESIAN_POINT('',(93.45415,-106.3831,1.585)); +#160138 = LINE('',#160139,#160140); +#160139 = CARTESIAN_POINT('',(93.45415,-107.3231,1.585)); +#160140 = VECTOR('',#160141,1.); +#160141 = DIRECTION('',(0.,1.,0.)); +#160142 = ORIENTED_EDGE('',*,*,#160143,.T.); +#160143 = EDGE_CURVE('',#160136,#160058,#160144,.T.); +#160144 = LINE('',#160145,#160146); +#160145 = CARTESIAN_POINT('',(93.45415,-106.3831,1.585)); +#160146 = VECTOR('',#160147,1.); +#160147 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#160148 = PLANE('',#160149); +#160149 = AXIS2_PLACEMENT_3D('',#160150,#160151,#160152); +#160150 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160151 = DIRECTION('',(0.,0.,1.)); +#160152 = DIRECTION('',(1.,0.,-0.)); +#160153 = SHELL_BASED_SURFACE_MODEL('',(#160154)); +#160154 = OPEN_SHELL('',(#160155)); +#160155 = ADVANCED_FACE('',(#160156),#160249,.T.); +#160156 = FACE_BOUND('',#160157,.F.); +#160157 = EDGE_LOOP('',(#160158,#160168,#160176,#160184,#160192,#160200, + #160209,#160217,#160226,#160234,#160243)); +#160158 = ORIENTED_EDGE('',*,*,#160159,.T.); +#160159 = EDGE_CURVE('',#160160,#160162,#160164,.T.); +#160160 = VERTEX_POINT('',#160161); +#160161 = CARTESIAN_POINT('',(122.829346,-106.93888,1.585)); +#160162 = VERTEX_POINT('',#160163); +#160163 = CARTESIAN_POINT('',(122.874405,-106.920216,1.585)); +#160164 = LINE('',#160165,#160166); +#160165 = CARTESIAN_POINT('',(122.829346,-106.93888,1.585)); +#160166 = VECTOR('',#160167,1.); +#160167 = DIRECTION('',(0.923879887046,0.382682576441,0.)); +#160168 = ORIENTED_EDGE('',*,*,#160169,.T.); +#160169 = EDGE_CURVE('',#160162,#160170,#160172,.T.); +#160170 = VERTEX_POINT('',#160171); +#160171 = CARTESIAN_POINT('',(122.923179,-106.920216,1.585)); +#160172 = LINE('',#160173,#160174); +#160173 = CARTESIAN_POINT('',(122.874405,-106.920216,1.585)); +#160174 = VECTOR('',#160175,1.); +#160175 = DIRECTION('',(1.,0.,0.)); +#160176 = ORIENTED_EDGE('',*,*,#160177,.T.); +#160177 = EDGE_CURVE('',#160170,#160178,#160180,.T.); +#160178 = VERTEX_POINT('',#160179); +#160179 = CARTESIAN_POINT('',(122.936376,-106.925682,1.585)); +#160180 = LINE('',#160181,#160182); +#160181 = CARTESIAN_POINT('',(122.923179,-106.920216,1.585)); +#160182 = VECTOR('',#160183,1.); +#160183 = DIRECTION('',(0.923888848229,-0.382660941458,0.)); +#160184 = ORIENTED_EDGE('',*,*,#160185,.T.); +#160185 = EDGE_CURVE('',#160178,#160186,#160188,.T.); +#160186 = VERTEX_POINT('',#160187); +#160187 = CARTESIAN_POINT('',(122.968243,-106.938885,1.585)); +#160188 = LINE('',#160189,#160190); +#160189 = CARTESIAN_POINT('',(122.936376,-106.925682,1.585)); +#160190 = VECTOR('',#160191,1.); +#160191 = DIRECTION('',(0.923846151615,-0.382764011039,0.)); +#160192 = ORIENTED_EDGE('',*,*,#160193,.T.); +#160193 = EDGE_CURVE('',#160186,#160194,#160196,.T.); +#160194 = VERTEX_POINT('',#160195); +#160195 = CARTESIAN_POINT('',(123.088439,-107.059082,1.585)); +#160196 = LINE('',#160197,#160198); +#160197 = CARTESIAN_POINT('',(122.968243,-106.938885,1.585)); +#160198 = VECTOR('',#160199,1.); +#160199 = DIRECTION('',(0.707103839719,-0.707109722642,0.)); +#160200 = ORIENTED_EDGE('',*,*,#160201,.T.); +#160201 = EDGE_CURVE('',#160194,#160202,#160204,.T.); +#160202 = VERTEX_POINT('',#160203); +#160203 = CARTESIAN_POINT('',(123.088439,-107.197974,1.585)); +#160204 = CIRCLE('',#160205,0.124995253133); +#160205 = AXIS2_PLACEMENT_3D('',#160206,#160207,#160208); +#160206 = CARTESIAN_POINT('',(122.984510821,-107.128528,1.585)); +#160207 = DIRECTION('',(0.,0.,-1.)); +#160208 = DIRECTION('',(0.831457006509,0.555589098459,0.)); +#160209 = ORIENTED_EDGE('',*,*,#160210,.T.); +#160210 = EDGE_CURVE('',#160202,#160211,#160213,.T.); +#160211 = VERTEX_POINT('',#160212); +#160212 = CARTESIAN_POINT('',(122.968238,-107.318176,1.585)); +#160213 = LINE('',#160214,#160215); +#160214 = CARTESIAN_POINT('',(123.088439,-107.197974,1.585)); +#160215 = VECTOR('',#160216,1.); +#160216 = DIRECTION('',(-0.707103839841,-0.70710972252,0.)); +#160217 = ORIENTED_EDGE('',*,*,#160218,.T.); +#160218 = EDGE_CURVE('',#160211,#160219,#160221,.T.); +#160219 = VERTEX_POINT('',#160220); +#160220 = CARTESIAN_POINT('',(122.82934,-107.31817,1.585)); +#160221 = CIRCLE('',#160222,0.124997983505); +#160222 = AXIS2_PLACEMENT_3D('',#160223,#160224,#160225); +#160223 = CARTESIAN_POINT('',(122.89879348945,-107.2142435419,1.585)); +#160224 = DIRECTION('',(-0.,0.,-1.)); +#160225 = DIRECTION('',(0.555565046686,-0.831473077676,-0.)); +#160226 = ORIENTED_EDGE('',*,*,#160227,.T.); +#160227 = EDGE_CURVE('',#160219,#160228,#160230,.T.); +#160228 = VERTEX_POINT('',#160229); +#160229 = CARTESIAN_POINT('',(122.709145,-107.197974,1.585)); +#160230 = LINE('',#160231,#160232); +#160231 = CARTESIAN_POINT('',(122.82934,-107.31817,1.585)); +#160232 = VECTOR('',#160233,1.); +#160233 = DIRECTION('',(-0.707103839694,0.707109722667,0.)); +#160234 = ORIENTED_EDGE('',*,*,#160235,.T.); +#160235 = EDGE_CURVE('',#160228,#160236,#160238,.T.); +#160236 = VERTEX_POINT('',#160237); +#160237 = CARTESIAN_POINT('',(122.709145,-107.059082,1.585)); +#160238 = CIRCLE('',#160239,0.124995253133); +#160239 = AXIS2_PLACEMENT_3D('',#160240,#160241,#160242); +#160240 = CARTESIAN_POINT('',(122.81307317899,-107.128528,1.585)); +#160241 = DIRECTION('',(0.,0.,-1.)); +#160242 = DIRECTION('',(-0.831457006509,-0.555589098459,-0.)); +#160243 = ORIENTED_EDGE('',*,*,#160244,.T.); +#160244 = EDGE_CURVE('',#160236,#160160,#160245,.T.); +#160245 = LINE('',#160246,#160247); +#160246 = CARTESIAN_POINT('',(122.709145,-107.059082,1.585)); +#160247 = VECTOR('',#160248,1.); +#160248 = DIRECTION('',(0.707103839841,0.70710972252,0.)); +#160249 = PLANE('',#160250); +#160250 = AXIS2_PLACEMENT_3D('',#160251,#160252,#160253); +#160251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160252 = DIRECTION('',(0.,0.,1.)); +#160253 = DIRECTION('',(1.,0.,-0.)); +#160254 = SHELL_BASED_SURFACE_MODEL('',(#160255)); +#160255 = OPEN_SHELL('',(#160256)); +#160256 = ADVANCED_FACE('',(#160257),#160350,.T.); +#160257 = FACE_BOUND('',#160258,.F.); +#160258 = EDGE_LOOP('',(#160259,#160269,#160277,#160285,#160293,#160301, + #160310,#160318,#160327,#160335,#160344)); +#160259 = ORIENTED_EDGE('',*,*,#160260,.T.); +#160260 = EDGE_CURVE('',#160261,#160263,#160265,.T.); +#160261 = VERTEX_POINT('',#160262); +#160262 = CARTESIAN_POINT('',(133.029346,-106.93888,1.585)); +#160263 = VERTEX_POINT('',#160264); +#160264 = CARTESIAN_POINT('',(133.074405,-106.920216,1.585)); +#160265 = LINE('',#160266,#160267); +#160266 = CARTESIAN_POINT('',(133.029346,-106.93888,1.585)); +#160267 = VECTOR('',#160268,1.); +#160268 = DIRECTION('',(0.923879887046,0.38268257644,0.)); +#160269 = ORIENTED_EDGE('',*,*,#160270,.T.); +#160270 = EDGE_CURVE('',#160263,#160271,#160273,.T.); +#160271 = VERTEX_POINT('',#160272); +#160272 = CARTESIAN_POINT('',(133.123179,-106.920216,1.585)); +#160273 = LINE('',#160274,#160275); +#160274 = CARTESIAN_POINT('',(133.074405,-106.920216,1.585)); +#160275 = VECTOR('',#160276,1.); +#160276 = DIRECTION('',(1.,0.,0.)); +#160277 = ORIENTED_EDGE('',*,*,#160278,.T.); +#160278 = EDGE_CURVE('',#160271,#160279,#160281,.T.); +#160279 = VERTEX_POINT('',#160280); +#160280 = CARTESIAN_POINT('',(133.136376,-106.925682,1.585)); +#160281 = LINE('',#160282,#160283); +#160282 = CARTESIAN_POINT('',(133.123179,-106.920216,1.585)); +#160283 = VECTOR('',#160284,1.); +#160284 = DIRECTION('',(0.92388884823,-0.382660941457,0.)); +#160285 = ORIENTED_EDGE('',*,*,#160286,.T.); +#160286 = EDGE_CURVE('',#160279,#160287,#160289,.T.); +#160287 = VERTEX_POINT('',#160288); +#160288 = CARTESIAN_POINT('',(133.168243,-106.938885,1.585)); +#160289 = LINE('',#160290,#160291); +#160290 = CARTESIAN_POINT('',(133.136376,-106.925682,1.585)); +#160291 = VECTOR('',#160292,1.); +#160292 = DIRECTION('',(0.923846151615,-0.382764011039,0.)); +#160293 = ORIENTED_EDGE('',*,*,#160294,.T.); +#160294 = EDGE_CURVE('',#160287,#160295,#160297,.T.); +#160295 = VERTEX_POINT('',#160296); +#160296 = CARTESIAN_POINT('',(133.288439,-107.059082,1.585)); +#160297 = LINE('',#160298,#160299); +#160298 = CARTESIAN_POINT('',(133.168243,-106.938885,1.585)); +#160299 = VECTOR('',#160300,1.); +#160300 = DIRECTION('',(0.707103839719,-0.707109722642,0.)); +#160301 = ORIENTED_EDGE('',*,*,#160302,.T.); +#160302 = EDGE_CURVE('',#160295,#160303,#160305,.T.); +#160303 = VERTEX_POINT('',#160304); +#160304 = CARTESIAN_POINT('',(133.288439,-107.197974,1.585)); +#160305 = CIRCLE('',#160306,0.124995253133); +#160306 = AXIS2_PLACEMENT_3D('',#160307,#160308,#160309); +#160307 = CARTESIAN_POINT('',(133.184510821,-107.128528,1.585)); +#160308 = DIRECTION('',(0.,0.,-1.)); +#160309 = DIRECTION('',(0.831457006509,0.555589098459,0.)); +#160310 = ORIENTED_EDGE('',*,*,#160311,.T.); +#160311 = EDGE_CURVE('',#160303,#160312,#160314,.T.); +#160312 = VERTEX_POINT('',#160313); +#160313 = CARTESIAN_POINT('',(133.168238,-107.318176,1.585)); +#160314 = LINE('',#160315,#160316); +#160315 = CARTESIAN_POINT('',(133.288439,-107.197974,1.585)); +#160316 = VECTOR('',#160317,1.); +#160317 = DIRECTION('',(-0.707103839841,-0.70710972252,0.)); +#160318 = ORIENTED_EDGE('',*,*,#160319,.T.); +#160319 = EDGE_CURVE('',#160312,#160320,#160322,.T.); +#160320 = VERTEX_POINT('',#160321); +#160321 = CARTESIAN_POINT('',(133.02934,-107.31817,1.585)); +#160322 = CIRCLE('',#160323,0.124997983505); +#160323 = AXIS2_PLACEMENT_3D('',#160324,#160325,#160326); +#160324 = CARTESIAN_POINT('',(133.09879348945,-107.2142435419,1.585)); +#160325 = DIRECTION('',(-0.,0.,-1.)); +#160326 = DIRECTION('',(0.555565046686,-0.831473077676,-0.)); +#160327 = ORIENTED_EDGE('',*,*,#160328,.T.); +#160328 = EDGE_CURVE('',#160320,#160329,#160331,.T.); +#160329 = VERTEX_POINT('',#160330); +#160330 = CARTESIAN_POINT('',(132.909145,-107.197974,1.585)); +#160331 = LINE('',#160332,#160333); +#160332 = CARTESIAN_POINT('',(133.02934,-107.31817,1.585)); +#160333 = VECTOR('',#160334,1.); +#160334 = DIRECTION('',(-0.707103839694,0.707109722667,0.)); +#160335 = ORIENTED_EDGE('',*,*,#160336,.T.); +#160336 = EDGE_CURVE('',#160329,#160337,#160339,.T.); +#160337 = VERTEX_POINT('',#160338); +#160338 = CARTESIAN_POINT('',(132.909145,-107.059082,1.585)); +#160339 = CIRCLE('',#160340,0.124995253133); +#160340 = AXIS2_PLACEMENT_3D('',#160341,#160342,#160343); +#160341 = CARTESIAN_POINT('',(133.01307317899,-107.128528,1.585)); +#160342 = DIRECTION('',(0.,0.,-1.)); +#160343 = DIRECTION('',(-0.831457006509,-0.555589098459,-0.)); +#160344 = ORIENTED_EDGE('',*,*,#160345,.T.); +#160345 = EDGE_CURVE('',#160337,#160261,#160346,.T.); +#160346 = LINE('',#160347,#160348); +#160347 = CARTESIAN_POINT('',(132.909145,-107.059082,1.585)); +#160348 = VECTOR('',#160349,1.); +#160349 = DIRECTION('',(0.707103839841,0.70710972252,0.)); +#160350 = PLANE('',#160351); +#160351 = AXIS2_PLACEMENT_3D('',#160352,#160353,#160354); +#160352 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160353 = DIRECTION('',(0.,0.,1.)); +#160354 = DIRECTION('',(1.,0.,-0.)); +#160355 = SHELL_BASED_SURFACE_MODEL('',(#160356)); +#160356 = OPEN_SHELL('',(#160357)); +#160357 = ADVANCED_FACE('',(#160358),#160394,.T.); +#160358 = FACE_BOUND('',#160359,.F.); +#160359 = EDGE_LOOP('',(#160360,#160371,#160379,#160388)); +#160360 = ORIENTED_EDGE('',*,*,#160361,.T.); +#160361 = EDGE_CURVE('',#160362,#160364,#160366,.T.); +#160362 = VERTEX_POINT('',#160363); +#160363 = CARTESIAN_POINT('',(97.629392,-106.8606,1.585)); +#160364 = VERTEX_POINT('',#160365); +#160365 = CARTESIAN_POINT('',(97.629392,-106.7406,1.585)); +#160366 = CIRCLE('',#160367,6.000000000042E-02); +#160367 = AXIS2_PLACEMENT_3D('',#160368,#160369,#160370); +#160368 = CARTESIAN_POINT('',(97.629391774412,-106.8006,1.585)); +#160369 = DIRECTION('',(0.,0.,-1.)); +#160370 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#160371 = ORIENTED_EDGE('',*,*,#160372,.T.); +#160372 = EDGE_CURVE('',#160364,#160373,#160375,.T.); +#160373 = VERTEX_POINT('',#160374); +#160374 = CARTESIAN_POINT('',(98.103908,-106.7406,1.585)); +#160375 = LINE('',#160376,#160377); +#160376 = CARTESIAN_POINT('',(97.629392,-106.7406,1.585)); +#160377 = VECTOR('',#160378,1.); +#160378 = DIRECTION('',(1.,0.,0.)); +#160379 = ORIENTED_EDGE('',*,*,#160380,.T.); +#160380 = EDGE_CURVE('',#160373,#160381,#160383,.T.); +#160381 = VERTEX_POINT('',#160382); +#160382 = CARTESIAN_POINT('',(98.103908,-106.8606,1.585)); +#160383 = CIRCLE('',#160384,6.000000000043E-02); +#160384 = AXIS2_PLACEMENT_3D('',#160385,#160386,#160387); +#160385 = CARTESIAN_POINT('',(98.103908225588,-106.8006,1.585)); +#160386 = DIRECTION('',(0.,0.,-1.)); +#160387 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#160388 = ORIENTED_EDGE('',*,*,#160389,.T.); +#160389 = EDGE_CURVE('',#160381,#160362,#160390,.T.); +#160390 = LINE('',#160391,#160392); +#160391 = CARTESIAN_POINT('',(98.103908,-106.8606,1.585)); +#160392 = VECTOR('',#160393,1.); +#160393 = DIRECTION('',(-1.,0.,0.)); +#160394 = PLANE('',#160395); +#160395 = AXIS2_PLACEMENT_3D('',#160396,#160397,#160398); +#160396 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160397 = DIRECTION('',(0.,0.,1.)); +#160398 = DIRECTION('',(1.,0.,-0.)); +#160399 = SHELL_BASED_SURFACE_MODEL('',(#160400)); +#160400 = OPEN_SHELL('',(#160401)); +#160401 = ADVANCED_FACE('',(#160402),#160438,.T.); +#160402 = FACE_BOUND('',#160403,.F.); +#160403 = EDGE_LOOP('',(#160404,#160415,#160423,#160432)); +#160404 = ORIENTED_EDGE('',*,*,#160405,.T.); +#160405 = EDGE_CURVE('',#160406,#160408,#160410,.T.); +#160406 = VERTEX_POINT('',#160407); +#160407 = CARTESIAN_POINT('',(101.629392,-106.8606,1.585)); +#160408 = VERTEX_POINT('',#160409); +#160409 = CARTESIAN_POINT('',(101.629392,-106.7406,1.585)); +#160410 = CIRCLE('',#160411,6.000000000042E-02); +#160411 = AXIS2_PLACEMENT_3D('',#160412,#160413,#160414); +#160412 = CARTESIAN_POINT('',(101.62939177441,-106.8006,1.585)); +#160413 = DIRECTION('',(0.,0.,-1.)); +#160414 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#160415 = ORIENTED_EDGE('',*,*,#160416,.T.); +#160416 = EDGE_CURVE('',#160408,#160417,#160419,.T.); +#160417 = VERTEX_POINT('',#160418); +#160418 = CARTESIAN_POINT('',(102.103908,-106.7406,1.585)); +#160419 = LINE('',#160420,#160421); +#160420 = CARTESIAN_POINT('',(101.629392,-106.7406,1.585)); +#160421 = VECTOR('',#160422,1.); +#160422 = DIRECTION('',(1.,0.,0.)); +#160423 = ORIENTED_EDGE('',*,*,#160424,.T.); +#160424 = EDGE_CURVE('',#160417,#160425,#160427,.T.); +#160425 = VERTEX_POINT('',#160426); +#160426 = CARTESIAN_POINT('',(102.103908,-106.8606,1.585)); +#160427 = CIRCLE('',#160428,6.000000000043E-02); +#160428 = AXIS2_PLACEMENT_3D('',#160429,#160430,#160431); +#160429 = CARTESIAN_POINT('',(102.10390822558,-106.8006,1.585)); +#160430 = DIRECTION('',(0.,0.,-1.)); +#160431 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#160432 = ORIENTED_EDGE('',*,*,#160433,.T.); +#160433 = EDGE_CURVE('',#160425,#160406,#160434,.T.); +#160434 = LINE('',#160435,#160436); +#160435 = CARTESIAN_POINT('',(102.103908,-106.8606,1.585)); +#160436 = VECTOR('',#160437,1.); +#160437 = DIRECTION('',(-1.,0.,0.)); +#160438 = PLANE('',#160439); +#160439 = AXIS2_PLACEMENT_3D('',#160440,#160441,#160442); +#160440 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160441 = DIRECTION('',(0.,0.,1.)); +#160442 = DIRECTION('',(1.,0.,-0.)); +#160443 = SHELL_BASED_SURFACE_MODEL('',(#160444)); +#160444 = OPEN_SHELL('',(#160445)); +#160445 = ADVANCED_FACE('',(#160446),#160482,.T.); +#160446 = FACE_BOUND('',#160447,.F.); +#160447 = EDGE_LOOP('',(#160448,#160459,#160467,#160476)); +#160448 = ORIENTED_EDGE('',*,*,#160449,.T.); +#160449 = EDGE_CURVE('',#160450,#160452,#160454,.T.); +#160450 = VERTEX_POINT('',#160451); +#160451 = CARTESIAN_POINT('',(105.629392,-106.8606,1.585)); +#160452 = VERTEX_POINT('',#160453); +#160453 = CARTESIAN_POINT('',(105.629392,-106.7406,1.585)); +#160454 = CIRCLE('',#160455,6.000000000042E-02); +#160455 = AXIS2_PLACEMENT_3D('',#160456,#160457,#160458); +#160456 = CARTESIAN_POINT('',(105.62939177441,-106.8006,1.585)); +#160457 = DIRECTION('',(0.,0.,-1.)); +#160458 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#160459 = ORIENTED_EDGE('',*,*,#160460,.T.); +#160460 = EDGE_CURVE('',#160452,#160461,#160463,.T.); +#160461 = VERTEX_POINT('',#160462); +#160462 = CARTESIAN_POINT('',(106.103908,-106.7406,1.585)); +#160463 = LINE('',#160464,#160465); +#160464 = CARTESIAN_POINT('',(105.629392,-106.7406,1.585)); +#160465 = VECTOR('',#160466,1.); +#160466 = DIRECTION('',(1.,0.,0.)); +#160467 = ORIENTED_EDGE('',*,*,#160468,.T.); +#160468 = EDGE_CURVE('',#160461,#160469,#160471,.T.); +#160469 = VERTEX_POINT('',#160470); +#160470 = CARTESIAN_POINT('',(106.103908,-106.8606,1.585)); +#160471 = CIRCLE('',#160472,6.000000000043E-02); +#160472 = AXIS2_PLACEMENT_3D('',#160473,#160474,#160475); +#160473 = CARTESIAN_POINT('',(106.10390822558,-106.8006,1.585)); +#160474 = DIRECTION('',(0.,0.,-1.)); +#160475 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#160476 = ORIENTED_EDGE('',*,*,#160477,.T.); +#160477 = EDGE_CURVE('',#160469,#160450,#160478,.T.); +#160478 = LINE('',#160479,#160480); +#160479 = CARTESIAN_POINT('',(106.103908,-106.8606,1.585)); +#160480 = VECTOR('',#160481,1.); +#160481 = DIRECTION('',(-1.,0.,0.)); +#160482 = PLANE('',#160483); +#160483 = AXIS2_PLACEMENT_3D('',#160484,#160485,#160486); +#160484 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160485 = DIRECTION('',(0.,0.,1.)); +#160486 = DIRECTION('',(1.,0.,-0.)); +#160487 = SHELL_BASED_SURFACE_MODEL('',(#160488)); +#160488 = OPEN_SHELL('',(#160489)); +#160489 = ADVANCED_FACE('',(#160490),#160526,.T.); +#160490 = FACE_BOUND('',#160491,.F.); +#160491 = EDGE_LOOP('',(#160492,#160503,#160511,#160520)); +#160492 = ORIENTED_EDGE('',*,*,#160493,.T.); +#160493 = EDGE_CURVE('',#160494,#160496,#160498,.T.); +#160494 = VERTEX_POINT('',#160495); +#160495 = CARTESIAN_POINT('',(179.279392,-106.8606,1.585)); +#160496 = VERTEX_POINT('',#160497); +#160497 = CARTESIAN_POINT('',(179.279392,-106.7406,1.585)); +#160498 = CIRCLE('',#160499,6.000000000043E-02); +#160499 = AXIS2_PLACEMENT_3D('',#160500,#160501,#160502); +#160500 = CARTESIAN_POINT('',(179.27939177441,-106.8006,1.585)); +#160501 = DIRECTION('',(0.,0.,-1.)); +#160502 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#160503 = ORIENTED_EDGE('',*,*,#160504,.T.); +#160504 = EDGE_CURVE('',#160496,#160505,#160507,.T.); +#160505 = VERTEX_POINT('',#160506); +#160506 = CARTESIAN_POINT('',(179.753908,-106.7406,1.585)); +#160507 = LINE('',#160508,#160509); +#160508 = CARTESIAN_POINT('',(179.279392,-106.7406,1.585)); +#160509 = VECTOR('',#160510,1.); +#160510 = DIRECTION('',(1.,0.,0.)); +#160511 = ORIENTED_EDGE('',*,*,#160512,.T.); +#160512 = EDGE_CURVE('',#160505,#160513,#160515,.T.); +#160513 = VERTEX_POINT('',#160514); +#160514 = CARTESIAN_POINT('',(179.753908,-106.8606,1.585)); +#160515 = CIRCLE('',#160516,6.000000000042E-02); +#160516 = AXIS2_PLACEMENT_3D('',#160517,#160518,#160519); +#160517 = CARTESIAN_POINT('',(179.75390822558,-106.8006,1.585)); +#160518 = DIRECTION('',(0.,0.,-1.)); +#160519 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#160520 = ORIENTED_EDGE('',*,*,#160521,.T.); +#160521 = EDGE_CURVE('',#160513,#160494,#160522,.T.); +#160522 = LINE('',#160523,#160524); +#160523 = CARTESIAN_POINT('',(179.753908,-106.8606,1.585)); +#160524 = VECTOR('',#160525,1.); +#160525 = DIRECTION('',(-1.,0.,0.)); +#160526 = PLANE('',#160527); +#160527 = AXIS2_PLACEMENT_3D('',#160528,#160529,#160530); +#160528 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160529 = DIRECTION('',(0.,0.,1.)); +#160530 = DIRECTION('',(1.,0.,-0.)); +#160531 = SHELL_BASED_SURFACE_MODEL('',(#160532)); +#160532 = OPEN_SHELL('',(#160533)); +#160533 = ADVANCED_FACE('',(#160534,#160730,#160797),#160849,.T.); +#160534 = FACE_BOUND('',#160535,.F.); +#160535 = EDGE_LOOP('',(#160536,#160547,#160555,#160564,#160572,#160580, + #160588,#160596,#160604,#160612,#160620,#160628,#160636,#160644, + #160652,#160660,#160668,#160676,#160684,#160692,#160700,#160708, + #160716,#160724)); +#160536 = ORIENTED_EDGE('',*,*,#160537,.T.); +#160537 = EDGE_CURVE('',#160538,#160540,#160542,.T.); +#160538 = VERTEX_POINT('',#160539); +#160539 = CARTESIAN_POINT('',(82.565672,-105.001689,1.585)); +#160540 = VERTEX_POINT('',#160541); +#160541 = CARTESIAN_POINT('',(82.683526,-104.883835,1.585)); +#160542 = CIRCLE('',#160543,0.150002525551); +#160543 = AXIS2_PLACEMENT_3D('',#160544,#160545,#160546); +#160544 = CARTESIAN_POINT('',(82.712791899413,-105.0309548994,1.585)); +#160545 = DIRECTION('',(0.,0.,-1.)); +#160546 = DIRECTION('',(-0.980782815972,0.195102711139,0.)); +#160547 = ORIENTED_EDGE('',*,*,#160548,.T.); +#160548 = EDGE_CURVE('',#160540,#160549,#160551,.T.); +#160549 = VERTEX_POINT('',#160550); +#160550 = CARTESIAN_POINT('',(85.342054,-104.883835,1.585)); +#160551 = LINE('',#160552,#160553); +#160552 = CARTESIAN_POINT('',(82.683526,-104.883835,1.585)); +#160553 = VECTOR('',#160554,1.); +#160554 = DIRECTION('',(1.,0.,0.)); +#160555 = ORIENTED_EDGE('',*,*,#160556,.T.); +#160556 = EDGE_CURVE('',#160549,#160557,#160559,.T.); +#160557 = VERTEX_POINT('',#160558); +#160558 = CARTESIAN_POINT('',(85.459908,-105.001689,1.585)); +#160559 = CIRCLE('',#160560,0.150002525551); +#160560 = AXIS2_PLACEMENT_3D('',#160561,#160562,#160563); +#160561 = CARTESIAN_POINT('',(85.312788100587,-105.0309548994,1.585)); +#160562 = DIRECTION('',(0.,0.,-1.)); +#160563 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#160564 = ORIENTED_EDGE('',*,*,#160565,.T.); +#160565 = EDGE_CURVE('',#160557,#160566,#160568,.T.); +#160566 = VERTEX_POINT('',#160567); +#160567 = CARTESIAN_POINT('',(85.459908,-105.926884,1.585)); +#160568 = LINE('',#160569,#160570); +#160569 = CARTESIAN_POINT('',(85.459908,-105.001689,1.585)); +#160570 = VECTOR('',#160571,1.); +#160571 = DIRECTION('',(0.,-1.,0.)); +#160572 = ORIENTED_EDGE('',*,*,#160573,.T.); +#160573 = EDGE_CURVE('',#160566,#160574,#160576,.T.); +#160574 = VERTEX_POINT('',#160575); +#160575 = CARTESIAN_POINT('',(85.446954,-105.964702,1.585)); +#160576 = LINE('',#160577,#160578); +#160577 = CARTESIAN_POINT('',(85.459908,-105.926884,1.585)); +#160578 = VECTOR('',#160579,1.); +#160579 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#160580 = ORIENTED_EDGE('',*,*,#160581,.T.); +#160581 = EDGE_CURVE('',#160574,#160582,#160584,.T.); +#160582 = VERTEX_POINT('',#160583); +#160583 = CARTESIAN_POINT('',(85.307479,-106.237207,1.585)); +#160584 = LINE('',#160585,#160586); +#160585 = CARTESIAN_POINT('',(85.446954,-105.964702,1.585)); +#160586 = VECTOR('',#160587,1.); +#160587 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#160588 = ORIENTED_EDGE('',*,*,#160589,.T.); +#160589 = EDGE_CURVE('',#160582,#160590,#160592,.T.); +#160590 = VERTEX_POINT('',#160591); +#160591 = CARTESIAN_POINT('',(85.148506,-106.393769,1.585)); +#160592 = LINE('',#160593,#160594); +#160593 = CARTESIAN_POINT('',(85.307479,-106.237207,1.585)); +#160594 = VECTOR('',#160595,1.); +#160595 = DIRECTION('',(-0.712488978586,-0.70168330135,0.)); +#160596 = ORIENTED_EDGE('',*,*,#160597,.T.); +#160597 = EDGE_CURVE('',#160590,#160598,#160600,.T.); +#160598 = VERTEX_POINT('',#160599); +#160599 = CARTESIAN_POINT('',(84.857171,-106.537532,1.585)); +#160600 = LINE('',#160601,#160602); +#160601 = CARTESIAN_POINT('',(85.148506,-106.393769,1.585)); +#160602 = VECTOR('',#160603,1.); +#160603 = DIRECTION('',(-0.896759796352,-0.442517646706,0.)); +#160604 = ORIENTED_EDGE('',*,*,#160605,.T.); +#160605 = EDGE_CURVE('',#160598,#160606,#160608,.T.); +#160606 = VERTEX_POINT('',#160607); +#160607 = CARTESIAN_POINT('',(84.817552,-106.542858,1.585)); +#160608 = LINE('',#160609,#160610); +#160609 = CARTESIAN_POINT('',(84.857171,-106.537532,1.585)); +#160610 = VECTOR('',#160611,1.); +#160611 = DIRECTION('',(-0.991084879219,-0.133231986338,0.)); +#160612 = ORIENTED_EDGE('',*,*,#160613,.T.); +#160613 = EDGE_CURVE('',#160606,#160614,#160616,.T.); +#160614 = VERTEX_POINT('',#160615); +#160615 = CARTESIAN_POINT('',(84.540669,-106.539976,1.585)); +#160616 = LINE('',#160617,#160618); +#160617 = CARTESIAN_POINT('',(84.817552,-106.542858,1.585)); +#160618 = VECTOR('',#160619,1.); +#160619 = DIRECTION('',(-0.999945833586,1.040816479305E-02,0.)); +#160620 = ORIENTED_EDGE('',*,*,#160621,.T.); +#160621 = EDGE_CURVE('',#160614,#160622,#160624,.T.); +#160622 = VERTEX_POINT('',#160623); +#160623 = CARTESIAN_POINT('',(84.502851,-106.527022,1.585)); +#160624 = LINE('',#160625,#160626); +#160625 = CARTESIAN_POINT('',(84.540669,-106.539976,1.585)); +#160626 = VECTOR('',#160627,1.); +#160627 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#160628 = ORIENTED_EDGE('',*,*,#160629,.T.); +#160629 = EDGE_CURVE('',#160622,#160630,#160632,.T.); +#160630 = VERTEX_POINT('',#160631); +#160631 = CARTESIAN_POINT('',(84.230346,-106.387547,1.585)); +#160632 = LINE('',#160633,#160634); +#160633 = CARTESIAN_POINT('',(84.502851,-106.527022,1.585)); +#160634 = VECTOR('',#160635,1.); +#160635 = DIRECTION('',(-0.890176840372,0.455615180679,0.)); +#160636 = ORIENTED_EDGE('',*,*,#160637,.T.); +#160637 = EDGE_CURVE('',#160630,#160638,#160640,.T.); +#160638 = VERTEX_POINT('',#160639); +#160639 = CARTESIAN_POINT('',(84.109294,-106.268161,1.585)); +#160640 = LINE('',#160641,#160642); +#160641 = CARTESIAN_POINT('',(84.230346,-106.387547,1.585)); +#160642 = VECTOR('',#160643,1.); +#160643 = DIRECTION('',(-0.711989247494,0.702190366961,0.)); +#160644 = ORIENTED_EDGE('',*,*,#160645,.T.); +#160645 = EDGE_CURVE('',#160638,#160646,#160648,.T.); +#160646 = VERTEX_POINT('',#160647); +#160647 = CARTESIAN_POINT('',(84.075606,-106.352383,1.585)); +#160648 = LINE('',#160649,#160650); +#160649 = CARTESIAN_POINT('',(84.109294,-106.268161,1.585)); +#160650 = VECTOR('',#160651,1.); +#160651 = DIRECTION('',(-0.371383073449,-0.928479732011,0.)); +#160652 = ORIENTED_EDGE('',*,*,#160653,.T.); +#160653 = EDGE_CURVE('',#160646,#160654,#160656,.T.); +#160654 = VERTEX_POINT('',#160655); +#160655 = CARTESIAN_POINT('',(83.910412,-106.517579,1.585)); +#160656 = LINE('',#160657,#160658); +#160657 = CARTESIAN_POINT('',(84.075606,-106.352383,1.585)); +#160658 = VECTOR('',#160659,1.); +#160659 = DIRECTION('',(-0.707102500737,-0.707111061611,0.)); +#160660 = ORIENTED_EDGE('',*,*,#160661,.T.); +#160661 = EDGE_CURVE('',#160654,#160662,#160664,.T.); +#160662 = VERTEX_POINT('',#160663); +#160663 = CARTESIAN_POINT('',(83.619075,-106.661341,1.585)); +#160664 = LINE('',#160665,#160666); +#160665 = CARTESIAN_POINT('',(83.910412,-106.517579,1.585)); +#160666 = VECTOR('',#160667,1.); +#160667 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#160668 = ORIENTED_EDGE('',*,*,#160669,.T.); +#160669 = EDGE_CURVE('',#160662,#160670,#160672,.T.); +#160670 = VERTEX_POINT('',#160671); +#160671 = CARTESIAN_POINT('',(83.579457,-106.666667,1.585)); +#160672 = LINE('',#160673,#160674); +#160673 = CARTESIAN_POINT('',(83.619075,-106.661341,1.585)); +#160674 = VECTOR('',#160675,1.); +#160675 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#160676 = ORIENTED_EDGE('',*,*,#160677,.T.); +#160677 = EDGE_CURVE('',#160670,#160678,#160680,.T.); +#160678 = VERTEX_POINT('',#160679); +#160679 = CARTESIAN_POINT('',(83.178764,-106.663785,1.585)); +#160680 = LINE('',#160681,#160682); +#160681 = CARTESIAN_POINT('',(83.579457,-106.666667,1.585)); +#160682 = VECTOR('',#160683,1.); +#160683 = DIRECTION('',(-0.999974134695,7.192352889099E-03,0.)); +#160684 = ORIENTED_EDGE('',*,*,#160685,.T.); +#160685 = EDGE_CURVE('',#160678,#160686,#160688,.T.); +#160686 = VERTEX_POINT('',#160687); +#160687 = CARTESIAN_POINT('',(83.140946,-106.650831,1.585)); +#160688 = LINE('',#160689,#160690); +#160689 = CARTESIAN_POINT('',(83.178764,-106.663785,1.585)); +#160690 = VECTOR('',#160691,1.); +#160691 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#160692 = ORIENTED_EDGE('',*,*,#160693,.T.); +#160693 = EDGE_CURVE('',#160686,#160694,#160696,.T.); +#160694 = VERTEX_POINT('',#160695); +#160695 = CARTESIAN_POINT('',(82.868442,-106.511357,1.585)); +#160696 = LINE('',#160697,#160698); +#160697 = CARTESIAN_POINT('',(83.140946,-106.650831,1.585)); +#160698 = VECTOR('',#160699,1.); +#160699 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#160700 = ORIENTED_EDGE('',*,*,#160701,.T.); +#160701 = EDGE_CURVE('',#160694,#160702,#160704,.T.); +#160702 = VERTEX_POINT('',#160703); +#160703 = CARTESIAN_POINT('',(82.711879,-106.352383,1.585)); +#160704 = LINE('',#160705,#160706); +#160705 = CARTESIAN_POINT('',(82.868442,-106.511357,1.585)); +#160706 = VECTOR('',#160707,1.); +#160707 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#160708 = ORIENTED_EDGE('',*,*,#160709,.T.); +#160709 = EDGE_CURVE('',#160702,#160710,#160712,.T.); +#160710 = VERTEX_POINT('',#160711); +#160711 = CARTESIAN_POINT('',(82.568116,-106.061048,1.585)); +#160712 = LINE('',#160713,#160714); +#160713 = CARTESIAN_POINT('',(82.711879,-106.352383,1.585)); +#160714 = VECTOR('',#160715,1.); +#160715 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#160716 = ORIENTED_EDGE('',*,*,#160717,.T.); +#160717 = EDGE_CURVE('',#160710,#160718,#160720,.T.); +#160718 = VERTEX_POINT('',#160719); +#160719 = CARTESIAN_POINT('',(82.56279,-106.021429,1.585)); +#160720 = LINE('',#160721,#160722); +#160721 = CARTESIAN_POINT('',(82.568116,-106.061048,1.585)); +#160722 = VECTOR('',#160723,1.); +#160723 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#160724 = ORIENTED_EDGE('',*,*,#160725,.T.); +#160725 = EDGE_CURVE('',#160718,#160538,#160726,.T.); +#160726 = LINE('',#160727,#160728); +#160727 = CARTESIAN_POINT('',(82.56279,-106.021429,1.585)); +#160728 = VECTOR('',#160729,1.); +#160729 = DIRECTION('',(2.826199315639E-03,0.999996006291,0.)); +#160730 = FACE_BOUND('',#160731,.F.); +#160731 = EDGE_LOOP('',(#160732,#160742,#160750,#160758,#160767,#160775, + #160783,#160791)); +#160732 = ORIENTED_EDGE('',*,*,#160733,.T.); +#160733 = EDGE_CURVE('',#160734,#160736,#160738,.T.); +#160734 = VERTEX_POINT('',#160735); +#160735 = CARTESIAN_POINT('',(83.924695,-105.873278,1.585)); +#160736 = VERTEX_POINT('',#160737); +#160737 = CARTESIAN_POINT('',(83.924695,-105.180953,1.585)); +#160738 = LINE('',#160739,#160740); +#160739 = CARTESIAN_POINT('',(83.924695,-105.873278,1.585)); +#160740 = VECTOR('',#160741,1.); +#160741 = DIRECTION('',(0.,1.,0.)); +#160742 = ORIENTED_EDGE('',*,*,#160743,.T.); +#160743 = EDGE_CURVE('',#160736,#160744,#160746,.T.); +#160744 = VERTEX_POINT('',#160745); +#160745 = CARTESIAN_POINT('',(82.86279,-105.180953,1.585)); +#160746 = LINE('',#160747,#160748); +#160747 = CARTESIAN_POINT('',(83.924695,-105.180953,1.585)); +#160748 = VECTOR('',#160749,1.); +#160749 = DIRECTION('',(-1.,0.,0.)); +#160750 = ORIENTED_EDGE('',*,*,#160751,.T.); +#160751 = EDGE_CURVE('',#160744,#160752,#160754,.T.); +#160752 = VERTEX_POINT('',#160753); +#160753 = CARTESIAN_POINT('',(82.86279,-105.986018,1.585)); +#160754 = LINE('',#160755,#160756); +#160755 = CARTESIAN_POINT('',(82.86279,-105.180953,1.585)); +#160756 = VECTOR('',#160757,1.); +#160757 = DIRECTION('',(0.,-1.,0.)); +#160758 = ORIENTED_EDGE('',*,*,#160759,.T.); +#160759 = EDGE_CURVE('',#160752,#160760,#160762,.T.); +#160760 = VERTEX_POINT('',#160761); +#160761 = CARTESIAN_POINT('',(83.243438,-106.366667,1.585)); +#160762 = CIRCLE('',#160763,0.536608239522); +#160763 = AXIS2_PLACEMENT_3D('',#160764,#160765,#160766); +#160764 = CARTESIAN_POINT('',(83.381368724711,-105.8480886376,1.585)); +#160765 = DIRECTION('',(0.,0.,1.)); +#160766 = DIRECTION('',(-0.966400972846,-0.25703921818,0.)); +#160767 = ORIENTED_EDGE('',*,*,#160768,.T.); +#160768 = EDGE_CURVE('',#160760,#160769,#160771,.T.); +#160769 = VERTEX_POINT('',#160770); +#160770 = CARTESIAN_POINT('',(83.544047,-106.366667,1.585)); +#160771 = LINE('',#160772,#160773); +#160772 = CARTESIAN_POINT('',(83.243438,-106.366667,1.585)); +#160773 = VECTOR('',#160774,1.); +#160774 = DIRECTION('',(1.,0.,0.)); +#160775 = ORIENTED_EDGE('',*,*,#160776,.T.); +#160776 = EDGE_CURVE('',#160769,#160777,#160779,.T.); +#160777 = VERTEX_POINT('',#160778); +#160778 = CARTESIAN_POINT('',(83.738221,-106.26958,1.585)); +#160779 = LINE('',#160780,#160781); +#160780 = CARTESIAN_POINT('',(83.544047,-106.366667,1.585)); +#160781 = VECTOR('',#160782,1.); +#160782 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#160783 = ORIENTED_EDGE('',*,*,#160784,.T.); +#160784 = EDGE_CURVE('',#160777,#160785,#160787,.T.); +#160785 = VERTEX_POINT('',#160786); +#160786 = CARTESIAN_POINT('',(83.81978,-106.18802,1.585)); +#160787 = LINE('',#160788,#160789); +#160788 = CARTESIAN_POINT('',(83.738221,-106.26958,1.585)); +#160789 = VECTOR('',#160790,1.); +#160790 = DIRECTION('',(0.70710244626,0.707111116087,0.)); +#160791 = ORIENTED_EDGE('',*,*,#160792,.T.); +#160792 = EDGE_CURVE('',#160785,#160734,#160793,.T.); +#160793 = LINE('',#160794,#160795); +#160794 = CARTESIAN_POINT('',(83.81978,-106.18802,1.585)); +#160795 = VECTOR('',#160796,1.); +#160796 = DIRECTION('',(0.316230478759,0.948682393799,0.)); +#160797 = FACE_BOUND('',#160798,.F.); +#160798 = EDGE_LOOP('',(#160799,#160810,#160818,#160826,#160834,#160843) + ); +#160799 = ORIENTED_EDGE('',*,*,#160800,.T.); +#160800 = EDGE_CURVE('',#160801,#160803,#160805,.T.); +#160801 = VERTEX_POINT('',#160802); +#160802 = CARTESIAN_POINT('',(84.782142,-106.242858,1.585)); +#160803 = VERTEX_POINT('',#160804); +#160804 = CARTESIAN_POINT('',(85.16279,-105.862209,1.585)); +#160805 = CIRCLE('',#160806,0.53661283273); +#160806 = AXIS2_PLACEMENT_3D('',#160807,#160808,#160809); +#160807 = CARTESIAN_POINT('',(84.644207520954,-105.7242758833,1.585)); +#160808 = DIRECTION('',(0.,0.,1.)); +#160809 = DIRECTION('',(0.257046553181,-0.966399021884,0.)); +#160810 = ORIENTED_EDGE('',*,*,#160811,.T.); +#160811 = EDGE_CURVE('',#160803,#160812,#160814,.T.); +#160812 = VERTEX_POINT('',#160813); +#160813 = CARTESIAN_POINT('',(85.16279,-105.180953,1.585)); +#160814 = LINE('',#160815,#160816); +#160815 = CARTESIAN_POINT('',(85.16279,-105.862209,1.585)); +#160816 = VECTOR('',#160817,1.); +#160817 = DIRECTION('',(0.,1.,0.)); +#160818 = ORIENTED_EDGE('',*,*,#160819,.T.); +#160819 = EDGE_CURVE('',#160812,#160820,#160822,.T.); +#160820 = VERTEX_POINT('',#160821); +#160821 = CARTESIAN_POINT('',(84.224695,-105.180953,1.585)); +#160822 = LINE('',#160823,#160824); +#160823 = CARTESIAN_POINT('',(85.16279,-105.180953,1.585)); +#160824 = VECTOR('',#160825,1.); +#160825 = DIRECTION('',(-1.,0.,0.)); +#160826 = ORIENTED_EDGE('',*,*,#160827,.T.); +#160827 = EDGE_CURVE('',#160820,#160828,#160830,.T.); +#160828 = VERTEX_POINT('',#160829); +#160829 = CARTESIAN_POINT('',(84.224695,-105.86221,1.585)); +#160830 = LINE('',#160831,#160832); +#160831 = CARTESIAN_POINT('',(84.224695,-105.180953,1.585)); +#160832 = VECTOR('',#160833,1.); +#160833 = DIRECTION('',(0.,-1.,0.)); +#160834 = ORIENTED_EDGE('',*,*,#160835,.T.); +#160835 = EDGE_CURVE('',#160828,#160836,#160838,.T.); +#160836 = VERTEX_POINT('',#160837); +#160837 = CARTESIAN_POINT('',(84.605344,-106.242858,1.585)); +#160838 = CIRCLE('',#160839,0.536602209951); +#160839 = AXIS2_PLACEMENT_3D('',#160840,#160841,#160842); +#160840 = CARTESIAN_POINT('',(84.743268433983,-105.7242842036,1.585)); +#160841 = DIRECTION('',(0.,0.,1.)); +#160842 = DIRECTION('',(-0.966401972198,-0.257035460845,0.)); +#160843 = ORIENTED_EDGE('',*,*,#160844,.T.); +#160844 = EDGE_CURVE('',#160836,#160801,#160845,.T.); +#160845 = LINE('',#160846,#160847); +#160846 = CARTESIAN_POINT('',(84.605344,-106.242858,1.585)); +#160847 = VECTOR('',#160848,1.); +#160848 = DIRECTION('',(1.,0.,0.)); +#160849 = PLANE('',#160850); +#160850 = AXIS2_PLACEMENT_3D('',#160851,#160852,#160853); +#160851 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160852 = DIRECTION('',(0.,0.,1.)); +#160853 = DIRECTION('',(1.,0.,-0.)); +#160854 = SHELL_BASED_SURFACE_MODEL('',(#160855)); +#160855 = OPEN_SHELL('',(#160856)); +#160856 = ADVANCED_FACE('',(#160857,#160942),#161001,.T.); +#160857 = FACE_BOUND('',#160858,.F.); +#160858 = EDGE_LOOP('',(#160859,#160870,#160878,#160886,#160894,#160903, + #160911,#160920,#160928,#160936)); +#160859 = ORIENTED_EDGE('',*,*,#160860,.T.); +#160860 = EDGE_CURVE('',#160861,#160863,#160865,.T.); +#160861 = VERTEX_POINT('',#160862); +#160862 = CARTESIAN_POINT('',(206.151866,-105.974267,1.585)); +#160863 = VERTEX_POINT('',#160864); +#160864 = CARTESIAN_POINT('',(206.635776,-106.045163,1.585)); +#160865 = CIRCLE('',#160866,0.34461174713); +#160866 = AXIS2_PLACEMENT_3D('',#160867,#160868,#160869); +#160867 = CARTESIAN_POINT('',(206.35862294377,-106.2499639757,1.585)); +#160868 = DIRECTION('',(0.,0.,-1.)); +#160869 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#160870 = ORIENTED_EDGE('',*,*,#160871,.T.); +#160871 = EDGE_CURVE('',#160863,#160872,#160874,.T.); +#160872 = VERTEX_POINT('',#160873); +#160873 = CARTESIAN_POINT('',(206.693837,-106.16561,1.585)); +#160874 = LINE('',#160875,#160876); +#160875 = CARTESIAN_POINT('',(206.635776,-106.045163,1.585)); +#160876 = VECTOR('',#160877,1.); +#160877 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#160878 = ORIENTED_EDGE('',*,*,#160879,.T.); +#160879 = EDGE_CURVE('',#160872,#160880,#160882,.T.); +#160880 = VERTEX_POINT('',#160881); +#160881 = CARTESIAN_POINT('',(206.695278,-106.486194,1.585)); +#160882 = LINE('',#160883,#160884); +#160883 = CARTESIAN_POINT('',(206.693837,-106.16561,1.585)); +#160884 = VECTOR('',#160885,1.); +#160885 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#160886 = ORIENTED_EDGE('',*,*,#160887,.T.); +#160887 = EDGE_CURVE('',#160880,#160888,#160890,.T.); +#160888 = VERTEX_POINT('',#160889); +#160889 = CARTESIAN_POINT('',(207.111101,-106.487635,1.585)); +#160890 = LINE('',#160891,#160892); +#160891 = CARTESIAN_POINT('',(206.695278,-106.486194,1.585)); +#160892 = VECTOR('',#160893,1.); +#160893 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#160894 = ORIENTED_EDGE('',*,*,#160895,.T.); +#160895 = EDGE_CURVE('',#160888,#160896,#160898,.T.); +#160896 = VERTEX_POINT('',#160897); +#160897 = CARTESIAN_POINT('',(207.096469,-106.636194,1.585)); +#160898 = CIRCLE('',#160899,7.500006711464E-02); +#160899 = AXIS2_PLACEMENT_3D('',#160900,#160901,#160902); +#160900 = CARTESIAN_POINT('',(207.09646906711,-106.5611939328,1.585)); +#160901 = DIRECTION('',(0.,0.,-1.)); +#160902 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#160903 = ORIENTED_EDGE('',*,*,#160904,.T.); +#160904 = EDGE_CURVE('',#160896,#160905,#160907,.T.); +#160905 = VERTEX_POINT('',#160906); +#160906 = CARTESIAN_POINT('',(206.081837,-106.634753,1.585)); +#160907 = LINE('',#160908,#160909); +#160908 = CARTESIAN_POINT('',(207.096469,-106.636194,1.585)); +#160909 = VECTOR('',#160910,1.); +#160910 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#160911 = ORIENTED_EDGE('',*,*,#160912,.T.); +#160912 = EDGE_CURVE('',#160905,#160913,#160915,.T.); +#160913 = VERTEX_POINT('',#160914); +#160914 = CARTESIAN_POINT('',(206.021469,-106.561194,1.585)); +#160915 = CIRCLE('',#160916,7.500074938985E-02); +#160916 = AXIS2_PLACEMENT_3D('',#160917,#160918,#160919); +#160917 = CARTESIAN_POINT('',(206.09646974938,-106.5611935338,1.585)); +#160918 = DIRECTION('',(0.,0.,-1.)); +#160919 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#160920 = ORIENTED_EDGE('',*,*,#160921,.T.); +#160921 = EDGE_CURVE('',#160913,#160922,#160924,.T.); +#160922 = VERTEX_POINT('',#160923); +#160923 = CARTESIAN_POINT('',(206.024132,-106.160433,1.585)); +#160924 = LINE('',#160925,#160926); +#160925 = CARTESIAN_POINT('',(206.021469,-106.561194,1.585)); +#160926 = VECTOR('',#160927,1.); +#160927 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#160928 = ORIENTED_EDGE('',*,*,#160929,.T.); +#160929 = EDGE_CURVE('',#160922,#160930,#160932,.T.); +#160930 = VERTEX_POINT('',#160931); +#160931 = CARTESIAN_POINT('',(206.086336,-106.03772,1.585)); +#160932 = LINE('',#160933,#160934); +#160933 = CARTESIAN_POINT('',(206.024132,-106.160433,1.585)); +#160934 = VECTOR('',#160935,1.); +#160935 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#160936 = ORIENTED_EDGE('',*,*,#160937,.T.); +#160937 = EDGE_CURVE('',#160930,#160861,#160938,.T.); +#160938 = LINE('',#160939,#160940); +#160939 = CARTESIAN_POINT('',(206.086336,-106.03772,1.585)); +#160940 = VECTOR('',#160941,1.); +#160941 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#160942 = FACE_BOUND('',#160943,.F.); +#160943 = EDGE_LOOP('',(#160944,#160955,#160963,#160971,#160979,#160987, + #160995)); +#160944 = ORIENTED_EDGE('',*,*,#160945,.T.); +#160945 = EDGE_CURVE('',#160946,#160948,#160950,.T.); +#160946 = VERTEX_POINT('',#160947); +#160947 = CARTESIAN_POINT('',(206.480613,-106.099024,1.585)); +#160948 = VERTEX_POINT('',#160949); +#160949 = CARTESIAN_POINT('',(206.205727,-106.129431,1.585)); +#160950 = CIRCLE('',#160951,0.198386215365); +#160951 = AXIS2_PLACEMENT_3D('',#160952,#160953,#160954); +#160952 = CARTESIAN_POINT('',(206.35880995783,-106.2556161753,1.585)); +#160953 = DIRECTION('',(0.,0.,1.)); +#160954 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#160955 = ORIENTED_EDGE('',*,*,#160956,.T.); +#160956 = EDGE_CURVE('',#160948,#160957,#160959,.T.); +#160957 = VERTEX_POINT('',#160958); +#160958 = CARTESIAN_POINT('',(206.171469,-106.197947,1.585)); +#160959 = LINE('',#160960,#160961); +#160960 = CARTESIAN_POINT('',(206.205727,-106.129431,1.585)); +#160961 = VECTOR('',#160962,1.); +#160962 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#160963 = ORIENTED_EDGE('',*,*,#160964,.T.); +#160964 = EDGE_CURVE('',#160957,#160965,#160967,.T.); +#160965 = VERTEX_POINT('',#160966); +#160966 = CARTESIAN_POINT('',(206.171469,-106.486194,1.585)); +#160967 = LINE('',#160968,#160969); +#160968 = CARTESIAN_POINT('',(206.171469,-106.197947,1.585)); +#160969 = VECTOR('',#160970,1.); +#160970 = DIRECTION('',(0.,-1.,0.)); +#160971 = ORIENTED_EDGE('',*,*,#160972,.T.); +#160972 = EDGE_CURVE('',#160965,#160973,#160975,.T.); +#160973 = VERTEX_POINT('',#160974); +#160974 = CARTESIAN_POINT('',(206.545278,-106.486194,1.585)); +#160975 = LINE('',#160976,#160977); +#160976 = CARTESIAN_POINT('',(206.171469,-106.486194,1.585)); +#160977 = VECTOR('',#160978,1.); +#160978 = DIRECTION('',(1.,0.,0.)); +#160979 = ORIENTED_EDGE('',*,*,#160980,.T.); +#160980 = EDGE_CURVE('',#160973,#160981,#160983,.T.); +#160981 = VERTEX_POINT('',#160982); +#160982 = CARTESIAN_POINT('',(206.545278,-106.197947,1.585)); +#160983 = LINE('',#160984,#160985); +#160984 = CARTESIAN_POINT('',(206.545278,-106.486194,1.585)); +#160985 = VECTOR('',#160986,1.); +#160986 = DIRECTION('',(0.,1.,0.)); +#160987 = ORIENTED_EDGE('',*,*,#160988,.T.); +#160988 = EDGE_CURVE('',#160981,#160989,#160991,.T.); +#160989 = VERTEX_POINT('',#160990); +#160990 = CARTESIAN_POINT('',(206.51102,-106.129431,1.585)); +#160991 = LINE('',#160992,#160993); +#160992 = CARTESIAN_POINT('',(206.545278,-106.197947,1.585)); +#160993 = VECTOR('',#160994,1.); +#160994 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#160995 = ORIENTED_EDGE('',*,*,#160996,.T.); +#160996 = EDGE_CURVE('',#160989,#160946,#160997,.T.); +#160997 = LINE('',#160998,#160999); +#160998 = CARTESIAN_POINT('',(206.51102,-106.129431,1.585)); +#160999 = VECTOR('',#161000,1.); +#161000 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#161001 = PLANE('',#161002); +#161002 = AXIS2_PLACEMENT_3D('',#161003,#161004,#161005); +#161003 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161004 = DIRECTION('',(0.,0.,1.)); +#161005 = DIRECTION('',(1.,0.,-0.)); +#161006 = SHELL_BASED_SURFACE_MODEL('',(#161007)); +#161007 = OPEN_SHELL('',(#161008)); +#161008 = ADVANCED_FACE('',(#161009),#161143,.T.); +#161009 = FACE_BOUND('',#161010,.F.); +#161010 = EDGE_LOOP('',(#161011,#161021,#161029,#161038,#161046,#161054, + #161063,#161071,#161080,#161088,#161096,#161104,#161112,#161121, + #161129,#161137)); +#161011 = ORIENTED_EDGE('',*,*,#161012,.T.); +#161012 = EDGE_CURVE('',#161013,#161015,#161017,.T.); +#161013 = VERTEX_POINT('',#161014); +#161014 = CARTESIAN_POINT('',(180.439752,-105.294941,1.585)); +#161015 = VERTEX_POINT('',#161016); +#161016 = CARTESIAN_POINT('',(180.478208,-105.27436,1.585)); +#161017 = LINE('',#161018,#161019); +#161018 = CARTESIAN_POINT('',(180.439752,-105.294941,1.585)); +#161019 = VECTOR('',#161020,1.); +#161020 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#161021 = ORIENTED_EDGE('',*,*,#161022,.T.); +#161022 = EDGE_CURVE('',#161015,#161023,#161025,.T.); +#161023 = VERTEX_POINT('',#161024); +#161024 = CARTESIAN_POINT('',(180.500045,-105.27436,1.585)); +#161025 = LINE('',#161026,#161027); +#161026 = CARTESIAN_POINT('',(180.478208,-105.27436,1.585)); +#161027 = VECTOR('',#161028,1.); +#161028 = DIRECTION('',(1.,0.,0.)); +#161029 = ORIENTED_EDGE('',*,*,#161030,.T.); +#161030 = EDGE_CURVE('',#161023,#161031,#161033,.T.); +#161031 = VERTEX_POINT('',#161032); +#161032 = CARTESIAN_POINT('',(180.56784,-105.347919,1.585)); +#161033 = CIRCLE('',#161034,7.216898094231E-02); +#161034 = AXIS2_PLACEMENT_3D('',#161035,#161036,#161037); +#161035 = CARTESIAN_POINT('',(180.49568706389,-105.3463972834,1.585)); +#161036 = DIRECTION('',(0.,0.,-1.)); +#161037 = DIRECTION('',(6.038516895301E-02,0.998175150648,0.)); +#161038 = ORIENTED_EDGE('',*,*,#161039,.T.); +#161039 = EDGE_CURVE('',#161031,#161040,#161042,.T.); +#161040 = VERTEX_POINT('',#161041); +#161041 = CARTESIAN_POINT('',(180.56784,-106.272919,1.585)); +#161042 = LINE('',#161043,#161044); +#161043 = CARTESIAN_POINT('',(180.56784,-105.347919,1.585)); +#161044 = VECTOR('',#161045,1.); +#161045 = DIRECTION('',(0.,-1.,0.)); +#161046 = ORIENTED_EDGE('',*,*,#161047,.T.); +#161047 = EDGE_CURVE('',#161040,#161048,#161050,.T.); +#161048 = VERTEX_POINT('',#161049); +#161049 = CARTESIAN_POINT('',(180.793186,-106.27436,1.585)); +#161050 = LINE('',#161051,#161052); +#161051 = CARTESIAN_POINT('',(180.56784,-106.272919,1.585)); +#161052 = VECTOR('',#161053,1.); +#161053 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#161054 = ORIENTED_EDGE('',*,*,#161055,.T.); +#161055 = EDGE_CURVE('',#161048,#161056,#161058,.T.); +#161056 = VERTEX_POINT('',#161057); +#161057 = CARTESIAN_POINT('',(180.778554,-106.422919,1.585)); +#161058 = CIRCLE('',#161059,7.500006711463E-02); +#161059 = AXIS2_PLACEMENT_3D('',#161060,#161061,#161062); +#161060 = CARTESIAN_POINT('',(180.77855406711,-106.3479189328,1.585)); +#161061 = DIRECTION('',(0.,0.,-1.)); +#161062 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#161063 = ORIENTED_EDGE('',*,*,#161064,.T.); +#161064 = EDGE_CURVE('',#161056,#161065,#161067,.T.); +#161065 = VERTEX_POINT('',#161066); +#161066 = CARTESIAN_POINT('',(180.192494,-106.421478,1.585)); +#161067 = LINE('',#161068,#161069); +#161068 = CARTESIAN_POINT('',(180.778554,-106.422919,1.585)); +#161069 = VECTOR('',#161070,1.); +#161070 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#161071 = ORIENTED_EDGE('',*,*,#161072,.T.); +#161072 = EDGE_CURVE('',#161065,#161073,#161075,.T.); +#161073 = VERTEX_POINT('',#161074); +#161074 = CARTESIAN_POINT('',(180.207126,-106.272919,1.585)); +#161075 = CIRCLE('',#161076,7.500006711462E-02); +#161076 = AXIS2_PLACEMENT_3D('',#161077,#161078,#161079); +#161077 = CARTESIAN_POINT('',(180.20712593288,-106.3479190671,1.585)); +#161078 = DIRECTION('',(0.,0.,-1.)); +#161079 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#161080 = ORIENTED_EDGE('',*,*,#161081,.T.); +#161081 = EDGE_CURVE('',#161073,#161082,#161084,.T.); +#161082 = VERTEX_POINT('',#161083); +#161083 = CARTESIAN_POINT('',(180.41784,-106.272919,1.585)); +#161084 = LINE('',#161085,#161086); +#161085 = CARTESIAN_POINT('',(180.207126,-106.272919,1.585)); +#161086 = VECTOR('',#161087,1.); +#161087 = DIRECTION('',(1.,0.,0.)); +#161088 = ORIENTED_EDGE('',*,*,#161089,.T.); +#161089 = EDGE_CURVE('',#161082,#161090,#161092,.T.); +#161090 = VERTEX_POINT('',#161091); +#161091 = CARTESIAN_POINT('',(180.41784,-105.576604,1.585)); +#161092 = LINE('',#161093,#161094); +#161093 = CARTESIAN_POINT('',(180.41784,-106.272919,1.585)); +#161094 = VECTOR('',#161095,1.); +#161095 = DIRECTION('',(0.,1.,0.)); +#161096 = ORIENTED_EDGE('',*,*,#161097,.T.); +#161097 = EDGE_CURVE('',#161090,#161098,#161100,.T.); +#161098 = VERTEX_POINT('',#161099); +#161099 = CARTESIAN_POINT('',(180.342204,-105.649131,1.585)); +#161100 = LINE('',#161101,#161102); +#161101 = CARTESIAN_POINT('',(180.41784,-105.576604,1.585)); +#161102 = VECTOR('',#161103,1.); +#161103 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#161104 = ORIENTED_EDGE('',*,*,#161105,.T.); +#161105 = EDGE_CURVE('',#161098,#161106,#161108,.T.); +#161106 = VERTEX_POINT('',#161107); +#161107 = CARTESIAN_POINT('',(180.226935,-105.70597,1.585)); +#161108 = LINE('',#161109,#161110); +#161109 = CARTESIAN_POINT('',(180.342204,-105.649131,1.585)); +#161110 = VECTOR('',#161111,1.); +#161111 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#161112 = ORIENTED_EDGE('',*,*,#161113,.T.); +#161113 = EDGE_CURVE('',#161106,#161114,#161116,.T.); +#161114 = VERTEX_POINT('',#161115); +#161115 = CARTESIAN_POINT('',(180.173585,-105.566551,1.585)); +#161116 = CIRCLE('',#161117,7.500005272361E-02); +#161117 = AXIS2_PLACEMENT_3D('',#161118,#161119,#161120); +#161118 = CARTESIAN_POINT('',(180.20712555676,-105.6336333297,1.585)); +#161119 = DIRECTION('',(0.,0.,-1.)); +#161120 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#161121 = ORIENTED_EDGE('',*,*,#161122,.T.); +#161122 = EDGE_CURVE('',#161114,#161123,#161125,.T.); +#161123 = VERTEX_POINT('',#161124); +#161124 = CARTESIAN_POINT('',(180.257937,-105.524375,1.585)); +#161125 = LINE('',#161126,#161127); +#161126 = CARTESIAN_POINT('',(180.173585,-105.566551,1.585)); +#161127 = VECTOR('',#161128,1.); +#161128 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#161129 = ORIENTED_EDGE('',*,*,#161130,.T.); +#161130 = EDGE_CURVE('',#161123,#161131,#161133,.T.); +#161131 = VERTEX_POINT('',#161132); +#161132 = CARTESIAN_POINT('',(180.339316,-105.442996,1.585)); +#161133 = LINE('',#161134,#161135); +#161134 = CARTESIAN_POINT('',(180.257937,-105.524375,1.585)); +#161135 = VECTOR('',#161136,1.); +#161136 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#161137 = ORIENTED_EDGE('',*,*,#161138,.T.); +#161138 = EDGE_CURVE('',#161131,#161013,#161139,.T.); +#161139 = LINE('',#161140,#161141); +#161140 = CARTESIAN_POINT('',(180.339316,-105.442996,1.585)); +#161141 = VECTOR('',#161142,1.); +#161142 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#161143 = PLANE('',#161144); +#161144 = AXIS2_PLACEMENT_3D('',#161145,#161146,#161147); +#161145 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161146 = DIRECTION('',(0.,0.,1.)); +#161147 = DIRECTION('',(1.,0.,-0.)); +#161148 = SHELL_BASED_SURFACE_MODEL('',(#161149)); +#161149 = OPEN_SHELL('',(#161150)); +#161150 = ADVANCED_FACE('',(#161151,#161262),#161314,.T.); +#161151 = FACE_BOUND('',#161152,.F.); +#161152 = EDGE_LOOP('',(#161153,#161164,#161172,#161181,#161189,#161198, + #161206,#161214,#161223,#161231,#161239,#161247,#161256)); +#161153 = ORIENTED_EDGE('',*,*,#161154,.T.); +#161154 = EDGE_CURVE('',#161155,#161157,#161159,.T.); +#161155 = VERTEX_POINT('',#161156); +#161156 = CARTESIAN_POINT('',(97.054996,-105.333287,1.585)); +#161157 = VERTEX_POINT('',#161158); +#161158 = CARTESIAN_POINT('',(97.128555,-105.272919,1.585)); +#161159 = CIRCLE('',#161160,7.500074938983E-02); +#161160 = AXIS2_PLACEMENT_3D('',#161161,#161162,#161163); +#161161 = CARTESIAN_POINT('',(97.12855546611,-105.3479197493,1.585)); +#161162 = DIRECTION('',(0.,0.,-1.)); +#161163 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#161164 = ORIENTED_EDGE('',*,*,#161165,.T.); +#161165 = EDGE_CURVE('',#161157,#161166,#161168,.T.); +#161166 = VERTEX_POINT('',#161167); +#161167 = CARTESIAN_POINT('',(97.524139,-105.27436,1.585)); +#161168 = LINE('',#161169,#161170); +#161169 = CARTESIAN_POINT('',(97.128555,-105.272919,1.585)); +#161170 = VECTOR('',#161171,1.); +#161171 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#161172 = ORIENTED_EDGE('',*,*,#161173,.T.); +#161173 = EDGE_CURVE('',#161166,#161174,#161176,.T.); +#161174 = VERTEX_POINT('',#161175); +#161175 = CARTESIAN_POINT('',(97.773542,-105.523763,1.585)); +#161176 = CIRCLE('',#161177,0.347870264855); +#161177 = AXIS2_PLACEMENT_3D('',#161178,#161179,#161180); +#161178 = CARTESIAN_POINT('',(97.436811265028,-105.6110907349,1.585)); +#161179 = DIRECTION('',(0.,0.,-1.)); +#161180 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161181 = ORIENTED_EDGE('',*,*,#161182,.T.); +#161182 = EDGE_CURVE('',#161174,#161183,#161185,.T.); +#161183 = VERTEX_POINT('',#161184); +#161184 = CARTESIAN_POINT('',(97.77232,-105.701062,1.585)); +#161185 = LINE('',#161186,#161187); +#161186 = CARTESIAN_POINT('',(97.773542,-105.523763,1.585)); +#161187 = VECTOR('',#161188,1.); +#161188 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#161189 = ORIENTED_EDGE('',*,*,#161190,.T.); +#161190 = EDGE_CURVE('',#161183,#161191,#161193,.T.); +#161191 = VERTEX_POINT('',#161192); +#161192 = CARTESIAN_POINT('',(97.524139,-105.945287,1.585)); +#161193 = CIRCLE('',#161194,0.348632345848); +#161194 = AXIS2_PLACEMENT_3D('',#161195,#161196,#161197); +#161195 = CARTESIAN_POINT('',(97.436370194038,-105.6078834593,1.585)); +#161196 = DIRECTION('',(0.,0.,-1.)); +#161197 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161198 = ORIENTED_EDGE('',*,*,#161199,.T.); +#161199 = EDGE_CURVE('',#161191,#161200,#161202,.T.); +#161200 = VERTEX_POINT('',#161201); +#161201 = CARTESIAN_POINT('',(97.510622,-105.946618,1.585)); +#161202 = LINE('',#161203,#161204); +#161203 = CARTESIAN_POINT('',(97.524139,-105.945287,1.585)); +#161204 = VECTOR('',#161205,1.); +#161205 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161206 = ORIENTED_EDGE('',*,*,#161207,.T.); +#161207 = EDGE_CURVE('',#161200,#161208,#161210,.T.); +#161208 = VERTEX_POINT('',#161209); +#161209 = CARTESIAN_POINT('',(97.768636,-106.317723,1.585)); +#161210 = LINE('',#161211,#161212); +#161211 = CARTESIAN_POINT('',(97.510622,-105.946618,1.585)); +#161212 = VECTOR('',#161213,1.); +#161213 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161214 = ORIENTED_EDGE('',*,*,#161215,.T.); +#161215 = EDGE_CURVE('',#161208,#161216,#161218,.T.); +#161216 = VERTEX_POINT('',#161217); +#161217 = CARTESIAN_POINT('',(97.638541,-106.390929,1.585)); +#161218 = CIRCLE('',#161219,7.500005951702E-02); +#161219 = AXIS2_PLACEMENT_3D('',#161220,#161221,#161222); +#161220 = CARTESIAN_POINT('',(97.699983062942,-106.3479187473,1.585)); +#161221 = DIRECTION('',(0.,0.,-1.)); +#161222 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161223 = ORIENTED_EDGE('',*,*,#161224,.T.); +#161224 = EDGE_CURVE('',#161216,#161225,#161227,.T.); +#161225 = VERTEX_POINT('',#161226); +#161226 = CARTESIAN_POINT('',(97.327601,-105.946728,1.585)); +#161227 = LINE('',#161228,#161229); +#161228 = CARTESIAN_POINT('',(97.638541,-106.390929,1.585)); +#161229 = VECTOR('',#161230,1.); +#161230 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161231 = ORIENTED_EDGE('',*,*,#161232,.T.); +#161232 = EDGE_CURVE('',#161225,#161233,#161235,.T.); +#161233 = VERTEX_POINT('',#161234); +#161234 = CARTESIAN_POINT('',(97.203555,-105.946728,1.585)); +#161235 = LINE('',#161236,#161237); +#161236 = CARTESIAN_POINT('',(97.327601,-105.946728,1.585)); +#161237 = VECTOR('',#161238,1.); +#161238 = DIRECTION('',(-1.,0.,0.)); +#161239 = ORIENTED_EDGE('',*,*,#161240,.T.); +#161240 = EDGE_CURVE('',#161233,#161241,#161243,.T.); +#161241 = VERTEX_POINT('',#161242); +#161242 = CARTESIAN_POINT('',(97.202114,-106.362551,1.585)); +#161243 = LINE('',#161244,#161245); +#161244 = CARTESIAN_POINT('',(97.203555,-105.946728,1.585)); +#161245 = VECTOR('',#161246,1.); +#161246 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161247 = ORIENTED_EDGE('',*,*,#161248,.T.); +#161248 = EDGE_CURVE('',#161241,#161249,#161251,.T.); +#161249 = VERTEX_POINT('',#161250); +#161250 = CARTESIAN_POINT('',(97.053555,-106.347919,1.585)); +#161251 = CIRCLE('',#161252,7.500006711463E-02); +#161252 = AXIS2_PLACEMENT_3D('',#161253,#161254,#161255); +#161253 = CARTESIAN_POINT('',(97.128555067115,-106.3479190671,1.585)); +#161254 = DIRECTION('',(-0.,0.,-1.)); +#161255 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161256 = ORIENTED_EDGE('',*,*,#161257,.T.); +#161257 = EDGE_CURVE('',#161249,#161155,#161258,.T.); +#161258 = LINE('',#161259,#161260); +#161259 = CARTESIAN_POINT('',(97.053555,-106.347919,1.585)); +#161260 = VECTOR('',#161261,1.); +#161261 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161262 = FACE_BOUND('',#161263,.F.); +#161263 = EDGE_LOOP('',(#161264,#161275,#161283,#161291,#161299,#161308) + ); +#161264 = ORIENTED_EDGE('',*,*,#161265,.T.); +#161265 = EDGE_CURVE('',#161266,#161268,#161270,.T.); +#161266 = VERTEX_POINT('',#161267); +#161267 = CARTESIAN_POINT('',(97.624983,-105.5561,1.585)); +#161268 = VERTEX_POINT('',#161269); +#161269 = CARTESIAN_POINT('',(97.491802,-105.422919,1.585)); +#161270 = CIRCLE('',#161271,0.18686440374); +#161271 = AXIS2_PLACEMENT_3D('',#161272,#161273,#161274); +#161272 = CARTESIAN_POINT('',(97.444266,-105.603636,1.585)); +#161273 = DIRECTION('',(0.,0.,1.)); +#161274 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161275 = ORIENTED_EDGE('',*,*,#161276,.T.); +#161276 = EDGE_CURVE('',#161268,#161277,#161279,.T.); +#161277 = VERTEX_POINT('',#161278); +#161278 = CARTESIAN_POINT('',(97.203555,-105.422919,1.585)); +#161279 = LINE('',#161280,#161281); +#161280 = CARTESIAN_POINT('',(97.491802,-105.422919,1.585)); +#161281 = VECTOR('',#161282,1.); +#161282 = DIRECTION('',(-1.,0.,0.)); +#161283 = ORIENTED_EDGE('',*,*,#161284,.T.); +#161284 = EDGE_CURVE('',#161277,#161285,#161287,.T.); +#161285 = VERTEX_POINT('',#161286); +#161286 = CARTESIAN_POINT('',(97.203555,-105.796728,1.585)); +#161287 = LINE('',#161288,#161289); +#161288 = CARTESIAN_POINT('',(97.203555,-105.422919,1.585)); +#161289 = VECTOR('',#161290,1.); +#161290 = DIRECTION('',(0.,-1.,0.)); +#161291 = ORIENTED_EDGE('',*,*,#161292,.T.); +#161292 = EDGE_CURVE('',#161285,#161293,#161295,.T.); +#161293 = VERTEX_POINT('',#161294); +#161294 = CARTESIAN_POINT('',(97.491802,-105.796728,1.585)); +#161295 = LINE('',#161296,#161297); +#161296 = CARTESIAN_POINT('',(97.203555,-105.796728,1.585)); +#161297 = VECTOR('',#161298,1.); +#161298 = DIRECTION('',(1.,0.,0.)); +#161299 = ORIENTED_EDGE('',*,*,#161300,.T.); +#161300 = EDGE_CURVE('',#161293,#161301,#161303,.T.); +#161301 = VERTEX_POINT('',#161302); +#161302 = CARTESIAN_POINT('',(97.624983,-105.663547,1.585)); +#161303 = CIRCLE('',#161304,0.18686440374); +#161304 = AXIS2_PLACEMENT_3D('',#161305,#161306,#161307); +#161305 = CARTESIAN_POINT('',(97.444266,-105.616011,1.585)); +#161306 = DIRECTION('',(0.,0.,1.)); +#161307 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161308 = ORIENTED_EDGE('',*,*,#161309,.T.); +#161309 = EDGE_CURVE('',#161301,#161266,#161310,.T.); +#161310 = LINE('',#161311,#161312); +#161311 = CARTESIAN_POINT('',(97.624983,-105.663547,1.585)); +#161312 = VECTOR('',#161313,1.); +#161313 = DIRECTION('',(0.,1.,0.)); +#161314 = PLANE('',#161315); +#161315 = AXIS2_PLACEMENT_3D('',#161316,#161317,#161318); +#161316 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161317 = DIRECTION('',(0.,0.,1.)); +#161318 = DIRECTION('',(1.,0.,-0.)); +#161319 = SHELL_BASED_SURFACE_MODEL('',(#161320)); +#161320 = OPEN_SHELL('',(#161321)); +#161321 = ADVANCED_FACE('',(#161322,#161433),#161485,.T.); +#161322 = FACE_BOUND('',#161323,.F.); +#161323 = EDGE_LOOP('',(#161324,#161335,#161343,#161352,#161360,#161369, + #161377,#161385,#161394,#161402,#161410,#161418,#161427)); +#161324 = ORIENTED_EDGE('',*,*,#161325,.T.); +#161325 = EDGE_CURVE('',#161326,#161328,#161330,.T.); +#161326 = VERTEX_POINT('',#161327); +#161327 = CARTESIAN_POINT('',(100.578805,-105.333287,1.585)); +#161328 = VERTEX_POINT('',#161329); +#161329 = CARTESIAN_POINT('',(100.652364,-105.272919,1.585)); +#161330 = CIRCLE('',#161331,7.500074938983E-02); +#161331 = AXIS2_PLACEMENT_3D('',#161332,#161333,#161334); +#161332 = CARTESIAN_POINT('',(100.65236446611,-105.3479197493,1.585)); +#161333 = DIRECTION('',(0.,0.,-1.)); +#161334 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#161335 = ORIENTED_EDGE('',*,*,#161336,.T.); +#161336 = EDGE_CURVE('',#161328,#161337,#161339,.T.); +#161337 = VERTEX_POINT('',#161338); +#161338 = CARTESIAN_POINT('',(101.047948,-105.27436,1.585)); +#161339 = LINE('',#161340,#161341); +#161340 = CARTESIAN_POINT('',(100.652364,-105.272919,1.585)); +#161341 = VECTOR('',#161342,1.); +#161342 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#161343 = ORIENTED_EDGE('',*,*,#161344,.T.); +#161344 = EDGE_CURVE('',#161337,#161345,#161347,.T.); +#161345 = VERTEX_POINT('',#161346); +#161346 = CARTESIAN_POINT('',(101.297351,-105.523763,1.585)); +#161347 = CIRCLE('',#161348,0.347870264855); +#161348 = AXIS2_PLACEMENT_3D('',#161349,#161350,#161351); +#161349 = CARTESIAN_POINT('',(100.96062026502,-105.6110907349,1.585)); +#161350 = DIRECTION('',(0.,0.,-1.)); +#161351 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161352 = ORIENTED_EDGE('',*,*,#161353,.T.); +#161353 = EDGE_CURVE('',#161345,#161354,#161356,.T.); +#161354 = VERTEX_POINT('',#161355); +#161355 = CARTESIAN_POINT('',(101.296129,-105.701062,1.585)); +#161356 = LINE('',#161357,#161358); +#161357 = CARTESIAN_POINT('',(101.297351,-105.523763,1.585)); +#161358 = VECTOR('',#161359,1.); +#161359 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#161360 = ORIENTED_EDGE('',*,*,#161361,.T.); +#161361 = EDGE_CURVE('',#161354,#161362,#161364,.T.); +#161362 = VERTEX_POINT('',#161363); +#161363 = CARTESIAN_POINT('',(101.047948,-105.945287,1.585)); +#161364 = CIRCLE('',#161365,0.348632345848); +#161365 = AXIS2_PLACEMENT_3D('',#161366,#161367,#161368); +#161366 = CARTESIAN_POINT('',(100.96017919403,-105.6078834593,1.585)); +#161367 = DIRECTION('',(0.,0.,-1.)); +#161368 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161369 = ORIENTED_EDGE('',*,*,#161370,.T.); +#161370 = EDGE_CURVE('',#161362,#161371,#161373,.T.); +#161371 = VERTEX_POINT('',#161372); +#161372 = CARTESIAN_POINT('',(101.034431,-105.946618,1.585)); +#161373 = LINE('',#161374,#161375); +#161374 = CARTESIAN_POINT('',(101.047948,-105.945287,1.585)); +#161375 = VECTOR('',#161376,1.); +#161376 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161377 = ORIENTED_EDGE('',*,*,#161378,.T.); +#161378 = EDGE_CURVE('',#161371,#161379,#161381,.T.); +#161379 = VERTEX_POINT('',#161380); +#161380 = CARTESIAN_POINT('',(101.292445,-106.317723,1.585)); +#161381 = LINE('',#161382,#161383); +#161382 = CARTESIAN_POINT('',(101.034431,-105.946618,1.585)); +#161383 = VECTOR('',#161384,1.); +#161384 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161385 = ORIENTED_EDGE('',*,*,#161386,.T.); +#161386 = EDGE_CURVE('',#161379,#161387,#161389,.T.); +#161387 = VERTEX_POINT('',#161388); +#161388 = CARTESIAN_POINT('',(101.16235,-106.390929,1.585)); +#161389 = CIRCLE('',#161390,7.500005951702E-02); +#161390 = AXIS2_PLACEMENT_3D('',#161391,#161392,#161393); +#161391 = CARTESIAN_POINT('',(101.22379206294,-106.3479187473,1.585)); +#161392 = DIRECTION('',(0.,0.,-1.)); +#161393 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161394 = ORIENTED_EDGE('',*,*,#161395,.T.); +#161395 = EDGE_CURVE('',#161387,#161396,#161398,.T.); +#161396 = VERTEX_POINT('',#161397); +#161397 = CARTESIAN_POINT('',(100.85141,-105.946728,1.585)); +#161398 = LINE('',#161399,#161400); +#161399 = CARTESIAN_POINT('',(101.16235,-106.390929,1.585)); +#161400 = VECTOR('',#161401,1.); +#161401 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161402 = ORIENTED_EDGE('',*,*,#161403,.T.); +#161403 = EDGE_CURVE('',#161396,#161404,#161406,.T.); +#161404 = VERTEX_POINT('',#161405); +#161405 = CARTESIAN_POINT('',(100.727364,-105.946728,1.585)); +#161406 = LINE('',#161407,#161408); +#161407 = CARTESIAN_POINT('',(100.85141,-105.946728,1.585)); +#161408 = VECTOR('',#161409,1.); +#161409 = DIRECTION('',(-1.,0.,0.)); +#161410 = ORIENTED_EDGE('',*,*,#161411,.T.); +#161411 = EDGE_CURVE('',#161404,#161412,#161414,.T.); +#161412 = VERTEX_POINT('',#161413); +#161413 = CARTESIAN_POINT('',(100.725923,-106.362551,1.585)); +#161414 = LINE('',#161415,#161416); +#161415 = CARTESIAN_POINT('',(100.727364,-105.946728,1.585)); +#161416 = VECTOR('',#161417,1.); +#161417 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161418 = ORIENTED_EDGE('',*,*,#161419,.T.); +#161419 = EDGE_CURVE('',#161412,#161420,#161422,.T.); +#161420 = VERTEX_POINT('',#161421); +#161421 = CARTESIAN_POINT('',(100.577364,-106.347919,1.585)); +#161422 = CIRCLE('',#161423,7.500006711463E-02); +#161423 = AXIS2_PLACEMENT_3D('',#161424,#161425,#161426); +#161424 = CARTESIAN_POINT('',(100.65236406711,-106.3479190671,1.585)); +#161425 = DIRECTION('',(-0.,0.,-1.)); +#161426 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161427 = ORIENTED_EDGE('',*,*,#161428,.T.); +#161428 = EDGE_CURVE('',#161420,#161326,#161429,.T.); +#161429 = LINE('',#161430,#161431); +#161430 = CARTESIAN_POINT('',(100.577364,-106.347919,1.585)); +#161431 = VECTOR('',#161432,1.); +#161432 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161433 = FACE_BOUND('',#161434,.F.); +#161434 = EDGE_LOOP('',(#161435,#161446,#161454,#161462,#161470,#161479) + ); +#161435 = ORIENTED_EDGE('',*,*,#161436,.T.); +#161436 = EDGE_CURVE('',#161437,#161439,#161441,.T.); +#161437 = VERTEX_POINT('',#161438); +#161438 = CARTESIAN_POINT('',(101.148792,-105.5561,1.585)); +#161439 = VERTEX_POINT('',#161440); +#161440 = CARTESIAN_POINT('',(101.015611,-105.422919,1.585)); +#161441 = CIRCLE('',#161442,0.18686440374); +#161442 = AXIS2_PLACEMENT_3D('',#161443,#161444,#161445); +#161443 = CARTESIAN_POINT('',(100.968075,-105.603636,1.585)); +#161444 = DIRECTION('',(0.,0.,1.)); +#161445 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161446 = ORIENTED_EDGE('',*,*,#161447,.T.); +#161447 = EDGE_CURVE('',#161439,#161448,#161450,.T.); +#161448 = VERTEX_POINT('',#161449); +#161449 = CARTESIAN_POINT('',(100.727364,-105.422919,1.585)); +#161450 = LINE('',#161451,#161452); +#161451 = CARTESIAN_POINT('',(101.015611,-105.422919,1.585)); +#161452 = VECTOR('',#161453,1.); +#161453 = DIRECTION('',(-1.,0.,0.)); +#161454 = ORIENTED_EDGE('',*,*,#161455,.T.); +#161455 = EDGE_CURVE('',#161448,#161456,#161458,.T.); +#161456 = VERTEX_POINT('',#161457); +#161457 = CARTESIAN_POINT('',(100.727364,-105.796728,1.585)); +#161458 = LINE('',#161459,#161460); +#161459 = CARTESIAN_POINT('',(100.727364,-105.422919,1.585)); +#161460 = VECTOR('',#161461,1.); +#161461 = DIRECTION('',(0.,-1.,0.)); +#161462 = ORIENTED_EDGE('',*,*,#161463,.T.); +#161463 = EDGE_CURVE('',#161456,#161464,#161466,.T.); +#161464 = VERTEX_POINT('',#161465); +#161465 = CARTESIAN_POINT('',(101.015611,-105.796728,1.585)); +#161466 = LINE('',#161467,#161468); +#161467 = CARTESIAN_POINT('',(100.727364,-105.796728,1.585)); +#161468 = VECTOR('',#161469,1.); +#161469 = DIRECTION('',(1.,0.,0.)); +#161470 = ORIENTED_EDGE('',*,*,#161471,.T.); +#161471 = EDGE_CURVE('',#161464,#161472,#161474,.T.); +#161472 = VERTEX_POINT('',#161473); +#161473 = CARTESIAN_POINT('',(101.148792,-105.663547,1.585)); +#161474 = CIRCLE('',#161475,0.18686440374); +#161475 = AXIS2_PLACEMENT_3D('',#161476,#161477,#161478); +#161476 = CARTESIAN_POINT('',(100.968075,-105.616011,1.585)); +#161477 = DIRECTION('',(0.,0.,1.)); +#161478 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161479 = ORIENTED_EDGE('',*,*,#161480,.T.); +#161480 = EDGE_CURVE('',#161472,#161437,#161481,.T.); +#161481 = LINE('',#161482,#161483); +#161482 = CARTESIAN_POINT('',(101.148792,-105.663547,1.585)); +#161483 = VECTOR('',#161484,1.); +#161484 = DIRECTION('',(0.,1.,0.)); +#161485 = PLANE('',#161486); +#161486 = AXIS2_PLACEMENT_3D('',#161487,#161488,#161489); +#161487 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161488 = DIRECTION('',(0.,0.,1.)); +#161489 = DIRECTION('',(1.,0.,-0.)); +#161490 = SHELL_BASED_SURFACE_MODEL('',(#161491)); +#161491 = OPEN_SHELL('',(#161492)); +#161492 = ADVANCED_FACE('',(#161493,#161604),#161656,.T.); +#161493 = FACE_BOUND('',#161494,.F.); +#161494 = EDGE_LOOP('',(#161495,#161506,#161514,#161523,#161531,#161540, + #161548,#161556,#161565,#161573,#161581,#161589,#161598)); +#161495 = ORIENTED_EDGE('',*,*,#161496,.T.); +#161496 = EDGE_CURVE('',#161497,#161499,#161501,.T.); +#161497 = VERTEX_POINT('',#161498); +#161498 = CARTESIAN_POINT('',(104.578805,-105.333287,1.585)); +#161499 = VERTEX_POINT('',#161500); +#161500 = CARTESIAN_POINT('',(104.652364,-105.272919,1.585)); +#161501 = CIRCLE('',#161502,7.500074938983E-02); +#161502 = AXIS2_PLACEMENT_3D('',#161503,#161504,#161505); +#161503 = CARTESIAN_POINT('',(104.65236446611,-105.3479197493,1.585)); +#161504 = DIRECTION('',(0.,0.,-1.)); +#161505 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#161506 = ORIENTED_EDGE('',*,*,#161507,.T.); +#161507 = EDGE_CURVE('',#161499,#161508,#161510,.T.); +#161508 = VERTEX_POINT('',#161509); +#161509 = CARTESIAN_POINT('',(105.047948,-105.27436,1.585)); +#161510 = LINE('',#161511,#161512); +#161511 = CARTESIAN_POINT('',(104.652364,-105.272919,1.585)); +#161512 = VECTOR('',#161513,1.); +#161513 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#161514 = ORIENTED_EDGE('',*,*,#161515,.T.); +#161515 = EDGE_CURVE('',#161508,#161516,#161518,.T.); +#161516 = VERTEX_POINT('',#161517); +#161517 = CARTESIAN_POINT('',(105.297351,-105.523763,1.585)); +#161518 = CIRCLE('',#161519,0.347870264855); +#161519 = AXIS2_PLACEMENT_3D('',#161520,#161521,#161522); +#161520 = CARTESIAN_POINT('',(104.96062026502,-105.6110907349,1.585)); +#161521 = DIRECTION('',(0.,0.,-1.)); +#161522 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161523 = ORIENTED_EDGE('',*,*,#161524,.T.); +#161524 = EDGE_CURVE('',#161516,#161525,#161527,.T.); +#161525 = VERTEX_POINT('',#161526); +#161526 = CARTESIAN_POINT('',(105.296129,-105.701062,1.585)); +#161527 = LINE('',#161528,#161529); +#161528 = CARTESIAN_POINT('',(105.297351,-105.523763,1.585)); +#161529 = VECTOR('',#161530,1.); +#161530 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#161531 = ORIENTED_EDGE('',*,*,#161532,.T.); +#161532 = EDGE_CURVE('',#161525,#161533,#161535,.T.); +#161533 = VERTEX_POINT('',#161534); +#161534 = CARTESIAN_POINT('',(105.047948,-105.945287,1.585)); +#161535 = CIRCLE('',#161536,0.348632345848); +#161536 = AXIS2_PLACEMENT_3D('',#161537,#161538,#161539); +#161537 = CARTESIAN_POINT('',(104.96017919403,-105.6078834593,1.585)); +#161538 = DIRECTION('',(0.,0.,-1.)); +#161539 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161540 = ORIENTED_EDGE('',*,*,#161541,.T.); +#161541 = EDGE_CURVE('',#161533,#161542,#161544,.T.); +#161542 = VERTEX_POINT('',#161543); +#161543 = CARTESIAN_POINT('',(105.034431,-105.946618,1.585)); +#161544 = LINE('',#161545,#161546); +#161545 = CARTESIAN_POINT('',(105.047948,-105.945287,1.585)); +#161546 = VECTOR('',#161547,1.); +#161547 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161548 = ORIENTED_EDGE('',*,*,#161549,.T.); +#161549 = EDGE_CURVE('',#161542,#161550,#161552,.T.); +#161550 = VERTEX_POINT('',#161551); +#161551 = CARTESIAN_POINT('',(105.292445,-106.317723,1.585)); +#161552 = LINE('',#161553,#161554); +#161553 = CARTESIAN_POINT('',(105.034431,-105.946618,1.585)); +#161554 = VECTOR('',#161555,1.); +#161555 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161556 = ORIENTED_EDGE('',*,*,#161557,.T.); +#161557 = EDGE_CURVE('',#161550,#161558,#161560,.T.); +#161558 = VERTEX_POINT('',#161559); +#161559 = CARTESIAN_POINT('',(105.16235,-106.390929,1.585)); +#161560 = CIRCLE('',#161561,7.500005951702E-02); +#161561 = AXIS2_PLACEMENT_3D('',#161562,#161563,#161564); +#161562 = CARTESIAN_POINT('',(105.22379206294,-106.3479187473,1.585)); +#161563 = DIRECTION('',(0.,0.,-1.)); +#161564 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161565 = ORIENTED_EDGE('',*,*,#161566,.T.); +#161566 = EDGE_CURVE('',#161558,#161567,#161569,.T.); +#161567 = VERTEX_POINT('',#161568); +#161568 = CARTESIAN_POINT('',(104.85141,-105.946728,1.585)); +#161569 = LINE('',#161570,#161571); +#161570 = CARTESIAN_POINT('',(105.16235,-106.390929,1.585)); +#161571 = VECTOR('',#161572,1.); +#161572 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161573 = ORIENTED_EDGE('',*,*,#161574,.T.); +#161574 = EDGE_CURVE('',#161567,#161575,#161577,.T.); +#161575 = VERTEX_POINT('',#161576); +#161576 = CARTESIAN_POINT('',(104.727364,-105.946728,1.585)); +#161577 = LINE('',#161578,#161579); +#161578 = CARTESIAN_POINT('',(104.85141,-105.946728,1.585)); +#161579 = VECTOR('',#161580,1.); +#161580 = DIRECTION('',(-1.,0.,0.)); +#161581 = ORIENTED_EDGE('',*,*,#161582,.T.); +#161582 = EDGE_CURVE('',#161575,#161583,#161585,.T.); +#161583 = VERTEX_POINT('',#161584); +#161584 = CARTESIAN_POINT('',(104.725923,-106.362551,1.585)); +#161585 = LINE('',#161586,#161587); +#161586 = CARTESIAN_POINT('',(104.727364,-105.946728,1.585)); +#161587 = VECTOR('',#161588,1.); +#161588 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161589 = ORIENTED_EDGE('',*,*,#161590,.T.); +#161590 = EDGE_CURVE('',#161583,#161591,#161593,.T.); +#161591 = VERTEX_POINT('',#161592); +#161592 = CARTESIAN_POINT('',(104.577364,-106.347919,1.585)); +#161593 = CIRCLE('',#161594,7.500006711463E-02); +#161594 = AXIS2_PLACEMENT_3D('',#161595,#161596,#161597); +#161595 = CARTESIAN_POINT('',(104.65236406711,-106.3479190671,1.585)); +#161596 = DIRECTION('',(-0.,0.,-1.)); +#161597 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161598 = ORIENTED_EDGE('',*,*,#161599,.T.); +#161599 = EDGE_CURVE('',#161591,#161497,#161600,.T.); +#161600 = LINE('',#161601,#161602); +#161601 = CARTESIAN_POINT('',(104.577364,-106.347919,1.585)); +#161602 = VECTOR('',#161603,1.); +#161603 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161604 = FACE_BOUND('',#161605,.F.); +#161605 = EDGE_LOOP('',(#161606,#161617,#161625,#161633,#161641,#161650) + ); +#161606 = ORIENTED_EDGE('',*,*,#161607,.T.); +#161607 = EDGE_CURVE('',#161608,#161610,#161612,.T.); +#161608 = VERTEX_POINT('',#161609); +#161609 = CARTESIAN_POINT('',(105.148792,-105.5561,1.585)); +#161610 = VERTEX_POINT('',#161611); +#161611 = CARTESIAN_POINT('',(105.015611,-105.422919,1.585)); +#161612 = CIRCLE('',#161613,0.18686440374); +#161613 = AXIS2_PLACEMENT_3D('',#161614,#161615,#161616); +#161614 = CARTESIAN_POINT('',(104.968075,-105.603636,1.585)); +#161615 = DIRECTION('',(0.,0.,1.)); +#161616 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161617 = ORIENTED_EDGE('',*,*,#161618,.T.); +#161618 = EDGE_CURVE('',#161610,#161619,#161621,.T.); +#161619 = VERTEX_POINT('',#161620); +#161620 = CARTESIAN_POINT('',(104.727364,-105.422919,1.585)); +#161621 = LINE('',#161622,#161623); +#161622 = CARTESIAN_POINT('',(105.015611,-105.422919,1.585)); +#161623 = VECTOR('',#161624,1.); +#161624 = DIRECTION('',(-1.,0.,0.)); +#161625 = ORIENTED_EDGE('',*,*,#161626,.T.); +#161626 = EDGE_CURVE('',#161619,#161627,#161629,.T.); +#161627 = VERTEX_POINT('',#161628); +#161628 = CARTESIAN_POINT('',(104.727364,-105.796728,1.585)); +#161629 = LINE('',#161630,#161631); +#161630 = CARTESIAN_POINT('',(104.727364,-105.422919,1.585)); +#161631 = VECTOR('',#161632,1.); +#161632 = DIRECTION('',(0.,-1.,0.)); +#161633 = ORIENTED_EDGE('',*,*,#161634,.T.); +#161634 = EDGE_CURVE('',#161627,#161635,#161637,.T.); +#161635 = VERTEX_POINT('',#161636); +#161636 = CARTESIAN_POINT('',(105.015611,-105.796728,1.585)); +#161637 = LINE('',#161638,#161639); +#161638 = CARTESIAN_POINT('',(104.727364,-105.796728,1.585)); +#161639 = VECTOR('',#161640,1.); +#161640 = DIRECTION('',(1.,0.,0.)); +#161641 = ORIENTED_EDGE('',*,*,#161642,.T.); +#161642 = EDGE_CURVE('',#161635,#161643,#161645,.T.); +#161643 = VERTEX_POINT('',#161644); +#161644 = CARTESIAN_POINT('',(105.148792,-105.663547,1.585)); +#161645 = CIRCLE('',#161646,0.18686440374); +#161646 = AXIS2_PLACEMENT_3D('',#161647,#161648,#161649); +#161647 = CARTESIAN_POINT('',(104.968075,-105.616011,1.585)); +#161648 = DIRECTION('',(0.,0.,1.)); +#161649 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161650 = ORIENTED_EDGE('',*,*,#161651,.T.); +#161651 = EDGE_CURVE('',#161643,#161608,#161652,.T.); +#161652 = LINE('',#161653,#161654); +#161653 = CARTESIAN_POINT('',(105.148792,-105.663547,1.585)); +#161654 = VECTOR('',#161655,1.); +#161655 = DIRECTION('',(0.,1.,0.)); +#161656 = PLANE('',#161657); +#161657 = AXIS2_PLACEMENT_3D('',#161658,#161659,#161660); +#161658 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161659 = DIRECTION('',(0.,0.,1.)); +#161660 = DIRECTION('',(1.,0.,-0.)); +#161661 = SHELL_BASED_SURFACE_MODEL('',(#161662)); +#161662 = OPEN_SHELL('',(#161663)); +#161663 = ADVANCED_FACE('',(#161664,#161775),#161827,.T.); +#161664 = FACE_BOUND('',#161665,.F.); +#161665 = EDGE_LOOP('',(#161666,#161677,#161685,#161694,#161702,#161711, + #161719,#161727,#161736,#161744,#161752,#161760,#161769)); +#161666 = ORIENTED_EDGE('',*,*,#161667,.T.); +#161667 = EDGE_CURVE('',#161668,#161670,#161672,.T.); +#161668 = VERTEX_POINT('',#161669); +#161669 = CARTESIAN_POINT('',(178.228805,-105.333287,1.585)); +#161670 = VERTEX_POINT('',#161671); +#161671 = CARTESIAN_POINT('',(178.302364,-105.272919,1.585)); +#161672 = CIRCLE('',#161673,7.500074938989E-02); +#161673 = AXIS2_PLACEMENT_3D('',#161674,#161675,#161676); +#161674 = CARTESIAN_POINT('',(178.30236446611,-105.3479197493,1.585)); +#161675 = DIRECTION('',(0.,0.,-1.)); +#161676 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#161677 = ORIENTED_EDGE('',*,*,#161678,.T.); +#161678 = EDGE_CURVE('',#161670,#161679,#161681,.T.); +#161679 = VERTEX_POINT('',#161680); +#161680 = CARTESIAN_POINT('',(178.697948,-105.27436,1.585)); +#161681 = LINE('',#161682,#161683); +#161682 = CARTESIAN_POINT('',(178.302364,-105.272919,1.585)); +#161683 = VECTOR('',#161684,1.); +#161684 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#161685 = ORIENTED_EDGE('',*,*,#161686,.T.); +#161686 = EDGE_CURVE('',#161679,#161687,#161689,.T.); +#161687 = VERTEX_POINT('',#161688); +#161688 = CARTESIAN_POINT('',(178.947351,-105.523763,1.585)); +#161689 = CIRCLE('',#161690,0.347870264855); +#161690 = AXIS2_PLACEMENT_3D('',#161691,#161692,#161693); +#161691 = CARTESIAN_POINT('',(178.61062026502,-105.6110907349,1.585)); +#161692 = DIRECTION('',(0.,0.,-1.)); +#161693 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161694 = ORIENTED_EDGE('',*,*,#161695,.T.); +#161695 = EDGE_CURVE('',#161687,#161696,#161698,.T.); +#161696 = VERTEX_POINT('',#161697); +#161697 = CARTESIAN_POINT('',(178.946129,-105.701062,1.585)); +#161698 = LINE('',#161699,#161700); +#161699 = CARTESIAN_POINT('',(178.947351,-105.523763,1.585)); +#161700 = VECTOR('',#161701,1.); +#161701 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#161702 = ORIENTED_EDGE('',*,*,#161703,.T.); +#161703 = EDGE_CURVE('',#161696,#161704,#161706,.T.); +#161704 = VERTEX_POINT('',#161705); +#161705 = CARTESIAN_POINT('',(178.697948,-105.945287,1.585)); +#161706 = CIRCLE('',#161707,0.348632345849); +#161707 = AXIS2_PLACEMENT_3D('',#161708,#161709,#161710); +#161708 = CARTESIAN_POINT('',(178.61017919403,-105.6078834593,1.585)); +#161709 = DIRECTION('',(0.,0.,-1.)); +#161710 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161711 = ORIENTED_EDGE('',*,*,#161712,.T.); +#161712 = EDGE_CURVE('',#161704,#161713,#161715,.T.); +#161713 = VERTEX_POINT('',#161714); +#161714 = CARTESIAN_POINT('',(178.684431,-105.946618,1.585)); +#161715 = LINE('',#161716,#161717); +#161716 = CARTESIAN_POINT('',(178.697948,-105.945287,1.585)); +#161717 = VECTOR('',#161718,1.); +#161718 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161719 = ORIENTED_EDGE('',*,*,#161720,.T.); +#161720 = EDGE_CURVE('',#161713,#161721,#161723,.T.); +#161721 = VERTEX_POINT('',#161722); +#161722 = CARTESIAN_POINT('',(178.942445,-106.317723,1.585)); +#161723 = LINE('',#161724,#161725); +#161724 = CARTESIAN_POINT('',(178.684431,-105.946618,1.585)); +#161725 = VECTOR('',#161726,1.); +#161726 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161727 = ORIENTED_EDGE('',*,*,#161728,.T.); +#161728 = EDGE_CURVE('',#161721,#161729,#161731,.T.); +#161729 = VERTEX_POINT('',#161730); +#161730 = CARTESIAN_POINT('',(178.81235,-106.390929,1.585)); +#161731 = CIRCLE('',#161732,7.500005951702E-02); +#161732 = AXIS2_PLACEMENT_3D('',#161733,#161734,#161735); +#161733 = CARTESIAN_POINT('',(178.87379206294,-106.3479187473,1.585)); +#161734 = DIRECTION('',(0.,0.,-1.)); +#161735 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161736 = ORIENTED_EDGE('',*,*,#161737,.T.); +#161737 = EDGE_CURVE('',#161729,#161738,#161740,.T.); +#161738 = VERTEX_POINT('',#161739); +#161739 = CARTESIAN_POINT('',(178.50141,-105.946728,1.585)); +#161740 = LINE('',#161741,#161742); +#161741 = CARTESIAN_POINT('',(178.81235,-106.390929,1.585)); +#161742 = VECTOR('',#161743,1.); +#161743 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161744 = ORIENTED_EDGE('',*,*,#161745,.T.); +#161745 = EDGE_CURVE('',#161738,#161746,#161748,.T.); +#161746 = VERTEX_POINT('',#161747); +#161747 = CARTESIAN_POINT('',(178.377364,-105.946728,1.585)); +#161748 = LINE('',#161749,#161750); +#161749 = CARTESIAN_POINT('',(178.50141,-105.946728,1.585)); +#161750 = VECTOR('',#161751,1.); +#161751 = DIRECTION('',(-1.,0.,0.)); +#161752 = ORIENTED_EDGE('',*,*,#161753,.T.); +#161753 = EDGE_CURVE('',#161746,#161754,#161756,.T.); +#161754 = VERTEX_POINT('',#161755); +#161755 = CARTESIAN_POINT('',(178.375923,-106.362551,1.585)); +#161756 = LINE('',#161757,#161758); +#161757 = CARTESIAN_POINT('',(178.377364,-105.946728,1.585)); +#161758 = VECTOR('',#161759,1.); +#161759 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161760 = ORIENTED_EDGE('',*,*,#161761,.T.); +#161761 = EDGE_CURVE('',#161754,#161762,#161764,.T.); +#161762 = VERTEX_POINT('',#161763); +#161763 = CARTESIAN_POINT('',(178.227364,-106.347919,1.585)); +#161764 = CIRCLE('',#161765,7.500006711464E-02); +#161765 = AXIS2_PLACEMENT_3D('',#161766,#161767,#161768); +#161766 = CARTESIAN_POINT('',(178.30236406711,-106.3479190671,1.585)); +#161767 = DIRECTION('',(-0.,0.,-1.)); +#161768 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161769 = ORIENTED_EDGE('',*,*,#161770,.T.); +#161770 = EDGE_CURVE('',#161762,#161668,#161771,.T.); +#161771 = LINE('',#161772,#161773); +#161772 = CARTESIAN_POINT('',(178.227364,-106.347919,1.585)); +#161773 = VECTOR('',#161774,1.); +#161774 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161775 = FACE_BOUND('',#161776,.F.); +#161776 = EDGE_LOOP('',(#161777,#161788,#161796,#161804,#161812,#161821) + ); +#161777 = ORIENTED_EDGE('',*,*,#161778,.T.); +#161778 = EDGE_CURVE('',#161779,#161781,#161783,.T.); +#161779 = VERTEX_POINT('',#161780); +#161780 = CARTESIAN_POINT('',(178.798792,-105.5561,1.585)); +#161781 = VERTEX_POINT('',#161782); +#161782 = CARTESIAN_POINT('',(178.665611,-105.422919,1.585)); +#161783 = CIRCLE('',#161784,0.18686440374); +#161784 = AXIS2_PLACEMENT_3D('',#161785,#161786,#161787); +#161785 = CARTESIAN_POINT('',(178.618075,-105.603636,1.585)); +#161786 = DIRECTION('',(0.,0.,1.)); +#161787 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161788 = ORIENTED_EDGE('',*,*,#161789,.T.); +#161789 = EDGE_CURVE('',#161781,#161790,#161792,.T.); +#161790 = VERTEX_POINT('',#161791); +#161791 = CARTESIAN_POINT('',(178.377364,-105.422919,1.585)); +#161792 = LINE('',#161793,#161794); +#161793 = CARTESIAN_POINT('',(178.665611,-105.422919,1.585)); +#161794 = VECTOR('',#161795,1.); +#161795 = DIRECTION('',(-1.,0.,0.)); +#161796 = ORIENTED_EDGE('',*,*,#161797,.T.); +#161797 = EDGE_CURVE('',#161790,#161798,#161800,.T.); +#161798 = VERTEX_POINT('',#161799); +#161799 = CARTESIAN_POINT('',(178.377364,-105.796728,1.585)); +#161800 = LINE('',#161801,#161802); +#161801 = CARTESIAN_POINT('',(178.377364,-105.422919,1.585)); +#161802 = VECTOR('',#161803,1.); +#161803 = DIRECTION('',(0.,-1.,0.)); +#161804 = ORIENTED_EDGE('',*,*,#161805,.T.); +#161805 = EDGE_CURVE('',#161798,#161806,#161808,.T.); +#161806 = VERTEX_POINT('',#161807); +#161807 = CARTESIAN_POINT('',(178.665611,-105.796728,1.585)); +#161808 = LINE('',#161809,#161810); +#161809 = CARTESIAN_POINT('',(178.377364,-105.796728,1.585)); +#161810 = VECTOR('',#161811,1.); +#161811 = DIRECTION('',(1.,0.,0.)); +#161812 = ORIENTED_EDGE('',*,*,#161813,.T.); +#161813 = EDGE_CURVE('',#161806,#161814,#161816,.T.); +#161814 = VERTEX_POINT('',#161815); +#161815 = CARTESIAN_POINT('',(178.798792,-105.663547,1.585)); +#161816 = CIRCLE('',#161817,0.18686440374); +#161817 = AXIS2_PLACEMENT_3D('',#161818,#161819,#161820); +#161818 = CARTESIAN_POINT('',(178.618075,-105.616011,1.585)); +#161819 = DIRECTION('',(0.,0.,1.)); +#161820 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161821 = ORIENTED_EDGE('',*,*,#161822,.T.); +#161822 = EDGE_CURVE('',#161814,#161779,#161823,.T.); +#161823 = LINE('',#161824,#161825); +#161824 = CARTESIAN_POINT('',(178.798792,-105.663547,1.585)); +#161825 = VECTOR('',#161826,1.); +#161826 = DIRECTION('',(0.,1.,0.)); +#161827 = PLANE('',#161828); +#161828 = AXIS2_PLACEMENT_3D('',#161829,#161830,#161831); +#161829 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161830 = DIRECTION('',(0.,0.,1.)); +#161831 = DIRECTION('',(1.,0.,-0.)); +#161832 = SHELL_BASED_SURFACE_MODEL('',(#161833)); +#161833 = OPEN_SHELL('',(#161834)); +#161834 = ADVANCED_FACE('',(#161835),#162021,.T.); +#161835 = FACE_BOUND('',#161836,.F.); +#161836 = EDGE_LOOP('',(#161837,#161848,#161856,#161865,#161873,#161881, + #161890,#161898,#161907,#161915,#161923,#161931,#161940,#161948, + #161957,#161965,#161974,#161982,#161990,#161998,#162007,#162015)); +#161837 = ORIENTED_EDGE('',*,*,#161838,.T.); +#161838 = EDGE_CURVE('',#161839,#161841,#161843,.T.); +#161839 = VERTEX_POINT('',#161840); +#161840 = CARTESIAN_POINT('',(98.018685,-105.421478,1.585)); +#161841 = VERTEX_POINT('',#161842); +#161842 = CARTESIAN_POINT('',(98.033317,-105.272919,1.585)); +#161843 = CIRCLE('',#161844,7.500006711463E-02); +#161844 = AXIS2_PLACEMENT_3D('',#161845,#161846,#161847); +#161845 = CARTESIAN_POINT('',(98.033316932885,-105.3479190671,1.585)); +#161846 = DIRECTION('',(0.,0.,-1.)); +#161847 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#161848 = ORIENTED_EDGE('',*,*,#161849,.T.); +#161849 = EDGE_CURVE('',#161841,#161850,#161852,.T.); +#161850 = VERTEX_POINT('',#161851); +#161851 = CARTESIAN_POINT('',(98.660102,-105.273681,1.585)); +#161852 = LINE('',#161853,#161854); +#161853 = CARTESIAN_POINT('',(98.033317,-105.272919,1.585)); +#161854 = VECTOR('',#161855,1.); +#161855 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#161856 = ORIENTED_EDGE('',*,*,#161857,.T.); +#161857 = EDGE_CURVE('',#161850,#161858,#161860,.T.); +#161858 = VERTEX_POINT('',#161859); +#161859 = CARTESIAN_POINT('',(98.725923,-105.362551,1.585)); +#161860 = CIRCLE('',#161861,7.447391611625E-02); +#161861 = AXIS2_PLACEMENT_3D('',#161862,#161863,#161864); +#161862 = CARTESIAN_POINT('',(98.652922926644,-105.3478080874,1.585)); +#161863 = DIRECTION('',(0.,0.,-1.)); +#161864 = DIRECTION('',(9.639715124797E-02,0.995342950561,0.)); +#161865 = ORIENTED_EDGE('',*,*,#161866,.T.); +#161866 = EDGE_CURVE('',#161858,#161867,#161869,.T.); +#161867 = VERTEX_POINT('',#161868); +#161868 = CARTESIAN_POINT('',(98.708807,-105.397307,1.585)); +#161869 = LINE('',#161870,#161871); +#161870 = CARTESIAN_POINT('',(98.725923,-105.362551,1.585)); +#161871 = VECTOR('',#161872,1.); +#161872 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#161873 = ORIENTED_EDGE('',*,*,#161874,.T.); +#161874 = EDGE_CURVE('',#161867,#161875,#161877,.T.); +#161875 = VERTEX_POINT('',#161876); +#161876 = CARTESIAN_POINT('',(98.481911,-105.656616,1.585)); +#161877 = LINE('',#161878,#161879); +#161878 = CARTESIAN_POINT('',(98.708807,-105.397307,1.585)); +#161879 = VECTOR('',#161880,1.); +#161880 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#161881 = ORIENTED_EDGE('',*,*,#161882,.T.); +#161882 = EDGE_CURVE('',#161875,#161883,#161885,.T.); +#161883 = VERTEX_POINT('',#161884); +#161884 = CARTESIAN_POINT('',(98.725923,-105.904715,1.585)); +#161885 = CIRCLE('',#161886,0.348520834816); +#161886 = AXIS2_PLACEMENT_3D('',#161887,#161888,#161889); +#161887 = CARTESIAN_POINT('',(98.3886176174,-105.9924181993,1.585)); +#161888 = DIRECTION('',(0.,0.,-1.)); +#161889 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#161890 = ORIENTED_EDGE('',*,*,#161891,.T.); +#161891 = EDGE_CURVE('',#161883,#161892,#161894,.T.); +#161892 = VERTEX_POINT('',#161893); +#161893 = CARTESIAN_POINT('',(98.724701,-106.177252,1.585)); +#161894 = LINE('',#161895,#161896); +#161895 = CARTESIAN_POINT('',(98.725923,-105.904715,1.585)); +#161896 = VECTOR('',#161897,1.); +#161897 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#161898 = ORIENTED_EDGE('',*,*,#161899,.T.); +#161899 = EDGE_CURVE('',#161892,#161900,#161902,.T.); +#161900 = VERTEX_POINT('',#161901); +#161901 = CARTESIAN_POINT('',(98.47652,-106.421478,1.585)); +#161902 = CIRCLE('',#161903,0.348635327447); +#161903 = AXIS2_PLACEMENT_3D('',#161904,#161905,#161906); +#161904 = CARTESIAN_POINT('',(98.388748481291,-106.0840720841,1.585)); +#161905 = DIRECTION('',(0.,0.,-1.)); +#161906 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#161907 = ORIENTED_EDGE('',*,*,#161908,.T.); +#161908 = EDGE_CURVE('',#161900,#161909,#161911,.T.); +#161909 = VERTEX_POINT('',#161910); +#161910 = CARTESIAN_POINT('',(98.156364,-106.420256,1.585)); +#161911 = LINE('',#161912,#161913); +#161912 = CARTESIAN_POINT('',(98.47652,-106.421478,1.585)); +#161913 = VECTOR('',#161914,1.); +#161914 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#161915 = ORIENTED_EDGE('',*,*,#161916,.T.); +#161916 = EDGE_CURVE('',#161909,#161917,#161919,.T.); +#161917 = VERTEX_POINT('',#161918); +#161918 = CARTESIAN_POINT('',(98.033651,-106.35805,1.585)); +#161919 = LINE('',#161920,#161921); +#161920 = CARTESIAN_POINT('',(98.156364,-106.420256,1.585)); +#161921 = VECTOR('',#161922,1.); +#161922 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#161923 = ORIENTED_EDGE('',*,*,#161924,.T.); +#161924 = EDGE_CURVE('',#161917,#161925,#161927,.T.); +#161925 = VERTEX_POINT('',#161926); +#161926 = CARTESIAN_POINT('',(97.970956,-106.294347,1.585)); +#161927 = LINE('',#161928,#161929); +#161928 = CARTESIAN_POINT('',(98.033651,-106.35805,1.585)); +#161929 = VECTOR('',#161930,1.); +#161930 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#161931 = ORIENTED_EDGE('',*,*,#161932,.T.); +#161932 = EDGE_CURVE('',#161925,#161933,#161935,.T.); +#161933 = VERTEX_POINT('',#161934); +#161934 = CARTESIAN_POINT('',(98.086351,-106.199648,1.585)); +#161935 = CIRCLE('',#161936,7.500012668039E-02); +#161936 = AXIS2_PLACEMENT_3D('',#161937,#161938,#161939); +#161937 = CARTESIAN_POINT('',(98.033317051994,-106.2526802483,1.585)); +#161938 = DIRECTION('',(0.,0.,-1.)); +#161939 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#161940 = ORIENTED_EDGE('',*,*,#161941,.T.); +#161941 = EDGE_CURVE('',#161933,#161942,#161944,.T.); +#161942 = VERTEX_POINT('',#161943); +#161943 = CARTESIAN_POINT('',(98.125363,-106.238661,1.585)); +#161944 = LINE('',#161945,#161946); +#161945 = CARTESIAN_POINT('',(98.086351,-106.199648,1.585)); +#161946 = VECTOR('',#161947,1.); +#161947 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#161948 = ORIENTED_EDGE('',*,*,#161949,.T.); +#161949 = EDGE_CURVE('',#161942,#161950,#161952,.T.); +#161950 = VERTEX_POINT('',#161951); +#161951 = CARTESIAN_POINT('',(98.512698,-106.238661,1.585)); +#161952 = CIRCLE('',#161953,0.358502380266); +#161953 = AXIS2_PLACEMENT_3D('',#161954,#161955,#161956); +#161954 = CARTESIAN_POINT('',(98.3190305,-105.936971,1.585)); +#161955 = DIRECTION('',(0.,0.,1.)); +#161956 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#161957 = ORIENTED_EDGE('',*,*,#161958,.T.); +#161958 = EDGE_CURVE('',#161950,#161959,#161961,.T.); +#161959 = VERTEX_POINT('',#161960); +#161960 = CARTESIAN_POINT('',(98.543105,-106.208253,1.585)); +#161961 = LINE('',#161962,#161963); +#161962 = CARTESIAN_POINT('',(98.512698,-106.238661,1.585)); +#161963 = VECTOR('',#161964,1.); +#161964 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#161965 = ORIENTED_EDGE('',*,*,#161966,.T.); +#161966 = EDGE_CURVE('',#161959,#161967,#161969,.T.); +#161967 = VERTEX_POINT('',#161968); +#161968 = CARTESIAN_POINT('',(98.543106,-105.868536,1.585)); +#161969 = CIRCLE('',#161970,0.305616146029); +#161970 = AXIS2_PLACEMENT_3D('',#161971,#161972,#161973); +#161971 = CARTESIAN_POINT('',(98.289039920493,-106.0383937521,1.585)); +#161972 = DIRECTION('',(0.,-0.,1.)); +#161973 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#161974 = ORIENTED_EDGE('',*,*,#161975,.T.); +#161975 = EDGE_CURVE('',#161967,#161976,#161978,.T.); +#161976 = VERTEX_POINT('',#161977); +#161977 = CARTESIAN_POINT('',(98.512699,-105.838129,1.585)); +#161978 = LINE('',#161979,#161980); +#161979 = CARTESIAN_POINT('',(98.543106,-105.868536,1.585)); +#161980 = VECTOR('',#161981,1.); +#161981 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#161982 = ORIENTED_EDGE('',*,*,#161983,.T.); +#161983 = EDGE_CURVE('',#161976,#161984,#161986,.T.); +#161984 = VERTEX_POINT('',#161985); +#161985 = CARTESIAN_POINT('',(98.444183,-105.803871,1.585)); +#161986 = LINE('',#161987,#161988); +#161987 = CARTESIAN_POINT('',(98.512699,-105.838129,1.585)); +#161988 = VECTOR('',#161989,1.); +#161989 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#161990 = ORIENTED_EDGE('',*,*,#161991,.T.); +#161991 = EDGE_CURVE('',#161984,#161992,#161994,.T.); +#161992 = VERTEX_POINT('',#161993); +#161993 = CARTESIAN_POINT('',(98.304399,-105.80243,1.585)); +#161994 = LINE('',#161995,#161996); +#161995 = CARTESIAN_POINT('',(98.444183,-105.803871,1.585)); +#161996 = VECTOR('',#161997,1.); +#161997 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#161998 = ORIENTED_EDGE('',*,*,#161999,.T.); +#161999 = EDGE_CURVE('',#161992,#162000,#162002,.T.); +#162000 = VERTEX_POINT('',#162001); +#162001 = CARTESIAN_POINT('',(98.262588,-105.679483,1.585)); +#162002 = CIRCLE('',#162003,7.500015628755E-02); +#162003 = AXIS2_PLACEMENT_3D('',#162004,#162005,#162006); +#162004 = CARTESIAN_POINT('',(98.319031284325,-105.7288710461,1.585)); +#162005 = DIRECTION('',(0.,0.,-1.)); +#162006 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#162007 = ORIENTED_EDGE('',*,*,#162008,.T.); +#162008 = EDGE_CURVE('',#162000,#162009,#162011,.T.); +#162009 = VERTEX_POINT('',#162010); +#162010 = CARTESIAN_POINT('',(98.487082,-105.422919,1.585)); +#162011 = LINE('',#162012,#162013); +#162012 = CARTESIAN_POINT('',(98.262588,-105.679483,1.585)); +#162013 = VECTOR('',#162014,1.); +#162014 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#162015 = ORIENTED_EDGE('',*,*,#162016,.T.); +#162016 = EDGE_CURVE('',#162009,#161839,#162017,.T.); +#162017 = LINE('',#162018,#162019); +#162018 = CARTESIAN_POINT('',(98.487082,-105.422919,1.585)); +#162019 = VECTOR('',#162020,1.); +#162020 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#162021 = PLANE('',#162022); +#162022 = AXIS2_PLACEMENT_3D('',#162023,#162024,#162025); +#162023 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162024 = DIRECTION('',(0.,0.,1.)); +#162025 = DIRECTION('',(1.,0.,-0.)); +#162026 = SHELL_BASED_SURFACE_MODEL('',(#162027)); +#162027 = OPEN_SHELL('',(#162028)); +#162028 = ADVANCED_FACE('',(#162029),#162224,.T.); +#162029 = FACE_BOUND('',#162030,.F.); +#162030 = EDGE_LOOP('',(#162031,#162042,#162050,#162059,#162067,#162075, + #162083,#162091,#162100,#162108,#162117,#162125,#162133,#162141, + #162150,#162158,#162167,#162175,#162184,#162192,#162201,#162209, + #162218)); +#162031 = ORIENTED_EDGE('',*,*,#162032,.T.); +#162032 = EDGE_CURVE('',#162033,#162035,#162037,.T.); +#162033 = VERTEX_POINT('',#162034); +#162034 = CARTESIAN_POINT('',(101.580626,-105.32604,1.585)); +#162035 = VERTEX_POINT('',#162036); +#162036 = CARTESIAN_POINT('',(101.652364,-105.272919,1.585)); +#162037 = CIRCLE('',#162038,7.50033610077E-02); +#162038 = AXIS2_PLACEMENT_3D('',#162039,#162040,#162041); +#162039 = CARTESIAN_POINT('',(101.6523662707,-105.3479223609,1.585)); +#162040 = DIRECTION('',(0.,0.,-1.)); +#162041 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#162042 = ORIENTED_EDGE('',*,*,#162043,.T.); +#162043 = EDGE_CURVE('',#162035,#162044,#162046,.T.); +#162044 = VERTEX_POINT('',#162045); +#162045 = CARTESIAN_POINT('',(102.143186,-105.27436,1.585)); +#162046 = LINE('',#162047,#162048); +#162047 = CARTESIAN_POINT('',(101.652364,-105.272919,1.585)); +#162048 = VECTOR('',#162049,1.); +#162049 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#162050 = ORIENTED_EDGE('',*,*,#162051,.T.); +#162051 = EDGE_CURVE('',#162044,#162052,#162054,.T.); +#162052 = VERTEX_POINT('',#162053); +#162053 = CARTESIAN_POINT('',(102.128554,-105.422919,1.585)); +#162054 = CIRCLE('',#162055,7.500006711464E-02); +#162055 = AXIS2_PLACEMENT_3D('',#162056,#162057,#162058); +#162056 = CARTESIAN_POINT('',(102.12855406711,-105.3479189328,1.585)); +#162057 = DIRECTION('',(0.,0.,-1.)); +#162058 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162059 = ORIENTED_EDGE('',*,*,#162060,.T.); +#162060 = EDGE_CURVE('',#162052,#162061,#162063,.T.); +#162061 = VERTEX_POINT('',#162062); +#162062 = CARTESIAN_POINT('',(101.720238,-105.422919,1.585)); +#162063 = LINE('',#162064,#162065); +#162064 = CARTESIAN_POINT('',(102.128554,-105.422919,1.585)); +#162065 = VECTOR('',#162066,1.); +#162066 = DIRECTION('',(-1.,0.,0.)); +#162067 = ORIENTED_EDGE('',*,*,#162068,.T.); +#162068 = EDGE_CURVE('',#162061,#162069,#162071,.T.); +#162069 = VERTEX_POINT('',#162070); +#162070 = CARTESIAN_POINT('',(101.695419,-105.671109,1.585)); +#162071 = LINE('',#162072,#162073); +#162072 = CARTESIAN_POINT('',(101.720238,-105.422919,1.585)); +#162073 = VECTOR('',#162074,1.); +#162074 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#162075 = ORIENTED_EDGE('',*,*,#162076,.T.); +#162076 = EDGE_CURVE('',#162069,#162077,#162079,.T.); +#162077 = VERTEX_POINT('',#162078); +#162078 = CARTESIAN_POINT('',(101.73297,-105.655312,1.585)); +#162079 = LINE('',#162080,#162081); +#162080 = CARTESIAN_POINT('',(101.695419,-105.671109,1.585)); +#162081 = VECTOR('',#162082,1.); +#162082 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#162083 = ORIENTED_EDGE('',*,*,#162084,.T.); +#162084 = EDGE_CURVE('',#162077,#162085,#162087,.T.); +#162085 = VERTEX_POINT('',#162086); +#162086 = CARTESIAN_POINT('',(102.005506,-105.656534,1.585)); +#162087 = LINE('',#162088,#162089); +#162088 = CARTESIAN_POINT('',(101.73297,-105.655312,1.585)); +#162089 = VECTOR('',#162090,1.); +#162090 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#162091 = ORIENTED_EDGE('',*,*,#162092,.T.); +#162092 = EDGE_CURVE('',#162085,#162093,#162095,.T.); +#162093 = VERTEX_POINT('',#162094); +#162094 = CARTESIAN_POINT('',(102.249732,-105.904715,1.585)); +#162095 = CIRCLE('',#162096,0.348625649748); +#162096 = AXIS2_PLACEMENT_3D('',#162097,#162098,#162099); +#162097 = CARTESIAN_POINT('',(101.91233404586,-105.9924786838,1.585)); +#162098 = DIRECTION('',(0.,0.,-1.)); +#162099 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162100 = ORIENTED_EDGE('',*,*,#162101,.T.); +#162101 = EDGE_CURVE('',#162093,#162102,#162104,.T.); +#162102 = VERTEX_POINT('',#162103); +#162103 = CARTESIAN_POINT('',(102.24851,-106.177252,1.585)); +#162104 = LINE('',#162105,#162106); +#162105 = CARTESIAN_POINT('',(102.249732,-105.904715,1.585)); +#162106 = VECTOR('',#162107,1.); +#162107 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162108 = ORIENTED_EDGE('',*,*,#162109,.T.); +#162109 = EDGE_CURVE('',#162102,#162110,#162112,.T.); +#162110 = VERTEX_POINT('',#162111); +#162111 = CARTESIAN_POINT('',(102.000329,-106.421478,1.585)); +#162112 = CIRCLE('',#162113,0.348635327447); +#162113 = AXIS2_PLACEMENT_3D('',#162114,#162115,#162116); +#162114 = CARTESIAN_POINT('',(101.91255748129,-106.0840720841,1.585)); +#162115 = DIRECTION('',(0.,0.,-1.)); +#162116 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162117 = ORIENTED_EDGE('',*,*,#162118,.T.); +#162118 = EDGE_CURVE('',#162110,#162119,#162121,.T.); +#162119 = VERTEX_POINT('',#162120); +#162120 = CARTESIAN_POINT('',(101.727792,-106.420256,1.585)); +#162121 = LINE('',#162122,#162123); +#162122 = CARTESIAN_POINT('',(102.000329,-106.421478,1.585)); +#162123 = VECTOR('',#162124,1.); +#162124 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#162125 = ORIENTED_EDGE('',*,*,#162126,.T.); +#162126 = EDGE_CURVE('',#162119,#162127,#162129,.T.); +#162127 = VERTEX_POINT('',#162128); +#162128 = CARTESIAN_POINT('',(101.605079,-106.35805,1.585)); +#162129 = LINE('',#162130,#162131); +#162130 = CARTESIAN_POINT('',(101.727792,-106.420256,1.585)); +#162131 = VECTOR('',#162132,1.); +#162132 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#162133 = ORIENTED_EDGE('',*,*,#162134,.T.); +#162134 = EDGE_CURVE('',#162127,#162135,#162137,.T.); +#162135 = VERTEX_POINT('',#162136); +#162136 = CARTESIAN_POINT('',(101.542384,-106.294347,1.585)); +#162137 = LINE('',#162138,#162139); +#162138 = CARTESIAN_POINT('',(101.605079,-106.35805,1.585)); +#162139 = VECTOR('',#162140,1.); +#162140 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#162141 = ORIENTED_EDGE('',*,*,#162142,.T.); +#162142 = EDGE_CURVE('',#162135,#162143,#162145,.T.); +#162143 = VERTEX_POINT('',#162144); +#162144 = CARTESIAN_POINT('',(101.657779,-106.199648,1.585)); +#162145 = CIRCLE('',#162146,7.50001266804E-02); +#162146 = AXIS2_PLACEMENT_3D('',#162147,#162148,#162149); +#162147 = CARTESIAN_POINT('',(101.60474505199,-106.2526802483,1.585)); +#162148 = DIRECTION('',(0.,0.,-1.)); +#162149 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#162150 = ORIENTED_EDGE('',*,*,#162151,.T.); +#162151 = EDGE_CURVE('',#162143,#162152,#162154,.T.); +#162152 = VERTEX_POINT('',#162153); +#162153 = CARTESIAN_POINT('',(101.696791,-106.238661,1.585)); +#162154 = LINE('',#162155,#162156); +#162155 = CARTESIAN_POINT('',(101.657779,-106.199648,1.585)); +#162156 = VECTOR('',#162157,1.); +#162157 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#162158 = ORIENTED_EDGE('',*,*,#162159,.T.); +#162159 = EDGE_CURVE('',#162152,#162160,#162162,.T.); +#162160 = VERTEX_POINT('',#162161); +#162161 = CARTESIAN_POINT('',(102.036507,-106.238661,1.585)); +#162162 = CIRCLE('',#162163,0.305620374329); +#162163 = AXIS2_PLACEMENT_3D('',#162164,#162165,#162166); +#162164 = CARTESIAN_POINT('',(101.866649,-105.98459,1.585)); +#162165 = DIRECTION('',(0.,0.,1.)); +#162166 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#162167 = ORIENTED_EDGE('',*,*,#162168,.T.); +#162168 = EDGE_CURVE('',#162160,#162169,#162171,.T.); +#162169 = VERTEX_POINT('',#162170); +#162170 = CARTESIAN_POINT('',(102.066914,-106.208253,1.585)); +#162171 = LINE('',#162172,#162173); +#162172 = CARTESIAN_POINT('',(102.036507,-106.238661,1.585)); +#162173 = VECTOR('',#162174,1.); +#162174 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162175 = ORIENTED_EDGE('',*,*,#162176,.T.); +#162176 = EDGE_CURVE('',#162169,#162177,#162179,.T.); +#162177 = VERTEX_POINT('',#162178); +#162178 = CARTESIAN_POINT('',(102.066915,-105.868536,1.585)); +#162179 = CIRCLE('',#162180,0.305616146029); +#162180 = AXIS2_PLACEMENT_3D('',#162181,#162182,#162183); +#162181 = CARTESIAN_POINT('',(101.81284892049,-106.0383937521,1.585)); +#162182 = DIRECTION('',(0.,-0.,1.)); +#162183 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162184 = ORIENTED_EDGE('',*,*,#162185,.T.); +#162185 = EDGE_CURVE('',#162177,#162186,#162188,.T.); +#162186 = VERTEX_POINT('',#162187); +#162187 = CARTESIAN_POINT('',(102.036508,-105.838129,1.585)); +#162188 = LINE('',#162189,#162190); +#162189 = CARTESIAN_POINT('',(102.066915,-105.868536,1.585)); +#162190 = VECTOR('',#162191,1.); +#162191 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162192 = ORIENTED_EDGE('',*,*,#162193,.T.); +#162193 = EDGE_CURVE('',#162186,#162194,#162196,.T.); +#162194 = VERTEX_POINT('',#162195); +#162195 = CARTESIAN_POINT('',(101.696791,-105.838129,1.585)); +#162196 = CIRCLE('',#162197,0.305621483548); +#162197 = AXIS2_PLACEMENT_3D('',#162198,#162199,#162200); +#162198 = CARTESIAN_POINT('',(101.8666495,-106.092201,1.585)); +#162199 = DIRECTION('',(0.,0.,1.)); +#162200 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#162201 = ORIENTED_EDGE('',*,*,#162202,.T.); +#162202 = EDGE_CURVE('',#162194,#162203,#162205,.T.); +#162203 = VERTEX_POINT('',#162204); +#162204 = CARTESIAN_POINT('',(101.640001,-105.890306,1.585)); +#162205 = LINE('',#162206,#162207); +#162206 = CARTESIAN_POINT('',(101.696791,-105.838129,1.585)); +#162207 = VECTOR('',#162208,1.); +#162208 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#162209 = ORIENTED_EDGE('',*,*,#162210,.T.); +#162210 = EDGE_CURVE('',#162203,#162211,#162213,.T.); +#162211 = VERTEX_POINT('',#162212); +#162212 = CARTESIAN_POINT('',(101.530095,-105.831349,1.585)); +#162213 = CIRCLE('',#162214,7.500024172471E-02); +#162214 = AXIS2_PLACEMENT_3D('',#162215,#162216,#162217); +#162215 = CARTESIAN_POINT('',(101.60474497002,-105.8241089561,1.585)); +#162216 = DIRECTION('',(-0.,0.,-1.)); +#162217 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#162218 = ORIENTED_EDGE('',*,*,#162219,.T.); +#162219 = EDGE_CURVE('',#162211,#162033,#162220,.T.); +#162220 = LINE('',#162221,#162222); +#162221 = CARTESIAN_POINT('',(101.530095,-105.831349,1.585)); +#162222 = VECTOR('',#162223,1.); +#162223 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#162224 = PLANE('',#162225); +#162225 = AXIS2_PLACEMENT_3D('',#162226,#162227,#162228); +#162226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162227 = DIRECTION('',(0.,0.,1.)); +#162228 = DIRECTION('',(1.,0.,-0.)); +#162229 = SHELL_BASED_SURFACE_MODEL('',(#162230)); +#162230 = OPEN_SHELL('',(#162231)); +#162231 = ADVANCED_FACE('',(#162232),#162427,.T.); +#162232 = FACE_BOUND('',#162233,.F.); +#162233 = EDGE_LOOP('',(#162234,#162245,#162253,#162262,#162270,#162278, + #162286,#162294,#162303,#162311,#162320,#162328,#162336,#162344, + #162353,#162361,#162370,#162378,#162387,#162395,#162404,#162412, + #162421)); +#162234 = ORIENTED_EDGE('',*,*,#162235,.T.); +#162235 = EDGE_CURVE('',#162236,#162238,#162240,.T.); +#162236 = VERTEX_POINT('',#162237); +#162237 = CARTESIAN_POINT('',(102.533007,-105.32604,1.585)); +#162238 = VERTEX_POINT('',#162239); +#162239 = CARTESIAN_POINT('',(102.604745,-105.272919,1.585)); +#162240 = CIRCLE('',#162241,7.50033610077E-02); +#162241 = AXIS2_PLACEMENT_3D('',#162242,#162243,#162244); +#162242 = CARTESIAN_POINT('',(102.6047472707,-105.3479223609,1.585)); +#162243 = DIRECTION('',(0.,0.,-1.)); +#162244 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#162245 = ORIENTED_EDGE('',*,*,#162246,.T.); +#162246 = EDGE_CURVE('',#162238,#162247,#162249,.T.); +#162247 = VERTEX_POINT('',#162248); +#162248 = CARTESIAN_POINT('',(103.095567,-105.27436,1.585)); +#162249 = LINE('',#162250,#162251); +#162250 = CARTESIAN_POINT('',(102.604745,-105.272919,1.585)); +#162251 = VECTOR('',#162252,1.); +#162252 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#162253 = ORIENTED_EDGE('',*,*,#162254,.T.); +#162254 = EDGE_CURVE('',#162247,#162255,#162257,.T.); +#162255 = VERTEX_POINT('',#162256); +#162256 = CARTESIAN_POINT('',(103.080935,-105.422919,1.585)); +#162257 = CIRCLE('',#162258,7.500006711464E-02); +#162258 = AXIS2_PLACEMENT_3D('',#162259,#162260,#162261); +#162259 = CARTESIAN_POINT('',(103.08093506711,-105.3479189328,1.585)); +#162260 = DIRECTION('',(0.,0.,-1.)); +#162261 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162262 = ORIENTED_EDGE('',*,*,#162263,.T.); +#162263 = EDGE_CURVE('',#162255,#162264,#162266,.T.); +#162264 = VERTEX_POINT('',#162265); +#162265 = CARTESIAN_POINT('',(102.672619,-105.422919,1.585)); +#162266 = LINE('',#162267,#162268); +#162267 = CARTESIAN_POINT('',(103.080935,-105.422919,1.585)); +#162268 = VECTOR('',#162269,1.); +#162269 = DIRECTION('',(-1.,0.,0.)); +#162270 = ORIENTED_EDGE('',*,*,#162271,.T.); +#162271 = EDGE_CURVE('',#162264,#162272,#162274,.T.); +#162272 = VERTEX_POINT('',#162273); +#162273 = CARTESIAN_POINT('',(102.6478,-105.671109,1.585)); +#162274 = LINE('',#162275,#162276); +#162275 = CARTESIAN_POINT('',(102.672619,-105.422919,1.585)); +#162276 = VECTOR('',#162277,1.); +#162277 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#162278 = ORIENTED_EDGE('',*,*,#162279,.T.); +#162279 = EDGE_CURVE('',#162272,#162280,#162282,.T.); +#162280 = VERTEX_POINT('',#162281); +#162281 = CARTESIAN_POINT('',(102.685351,-105.655312,1.585)); +#162282 = LINE('',#162283,#162284); +#162283 = CARTESIAN_POINT('',(102.6478,-105.671109,1.585)); +#162284 = VECTOR('',#162285,1.); +#162285 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#162286 = ORIENTED_EDGE('',*,*,#162287,.T.); +#162287 = EDGE_CURVE('',#162280,#162288,#162290,.T.); +#162288 = VERTEX_POINT('',#162289); +#162289 = CARTESIAN_POINT('',(102.957887,-105.656534,1.585)); +#162290 = LINE('',#162291,#162292); +#162291 = CARTESIAN_POINT('',(102.685351,-105.655312,1.585)); +#162292 = VECTOR('',#162293,1.); +#162293 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#162294 = ORIENTED_EDGE('',*,*,#162295,.T.); +#162295 = EDGE_CURVE('',#162288,#162296,#162298,.T.); +#162296 = VERTEX_POINT('',#162297); +#162297 = CARTESIAN_POINT('',(103.202113,-105.904715,1.585)); +#162298 = CIRCLE('',#162299,0.348625649748); +#162299 = AXIS2_PLACEMENT_3D('',#162300,#162301,#162302); +#162300 = CARTESIAN_POINT('',(102.86471504586,-105.9924786838,1.585)); +#162301 = DIRECTION('',(0.,0.,-1.)); +#162302 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162303 = ORIENTED_EDGE('',*,*,#162304,.T.); +#162304 = EDGE_CURVE('',#162296,#162305,#162307,.T.); +#162305 = VERTEX_POINT('',#162306); +#162306 = CARTESIAN_POINT('',(103.200891,-106.177252,1.585)); +#162307 = LINE('',#162308,#162309); +#162308 = CARTESIAN_POINT('',(103.202113,-105.904715,1.585)); +#162309 = VECTOR('',#162310,1.); +#162310 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162311 = ORIENTED_EDGE('',*,*,#162312,.T.); +#162312 = EDGE_CURVE('',#162305,#162313,#162315,.T.); +#162313 = VERTEX_POINT('',#162314); +#162314 = CARTESIAN_POINT('',(102.95271,-106.421478,1.585)); +#162315 = CIRCLE('',#162316,0.348635327447); +#162316 = AXIS2_PLACEMENT_3D('',#162317,#162318,#162319); +#162317 = CARTESIAN_POINT('',(102.86493848129,-106.0840720841,1.585)); +#162318 = DIRECTION('',(0.,0.,-1.)); +#162319 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162320 = ORIENTED_EDGE('',*,*,#162321,.T.); +#162321 = EDGE_CURVE('',#162313,#162322,#162324,.T.); +#162322 = VERTEX_POINT('',#162323); +#162323 = CARTESIAN_POINT('',(102.680173,-106.420256,1.585)); +#162324 = LINE('',#162325,#162326); +#162325 = CARTESIAN_POINT('',(102.95271,-106.421478,1.585)); +#162326 = VECTOR('',#162327,1.); +#162327 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#162328 = ORIENTED_EDGE('',*,*,#162329,.T.); +#162329 = EDGE_CURVE('',#162322,#162330,#162332,.T.); +#162330 = VERTEX_POINT('',#162331); +#162331 = CARTESIAN_POINT('',(102.55746,-106.35805,1.585)); +#162332 = LINE('',#162333,#162334); +#162333 = CARTESIAN_POINT('',(102.680173,-106.420256,1.585)); +#162334 = VECTOR('',#162335,1.); +#162335 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#162336 = ORIENTED_EDGE('',*,*,#162337,.T.); +#162337 = EDGE_CURVE('',#162330,#162338,#162340,.T.); +#162338 = VERTEX_POINT('',#162339); +#162339 = CARTESIAN_POINT('',(102.494765,-106.294347,1.585)); +#162340 = LINE('',#162341,#162342); +#162341 = CARTESIAN_POINT('',(102.55746,-106.35805,1.585)); +#162342 = VECTOR('',#162343,1.); +#162343 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#162344 = ORIENTED_EDGE('',*,*,#162345,.T.); +#162345 = EDGE_CURVE('',#162338,#162346,#162348,.T.); +#162346 = VERTEX_POINT('',#162347); +#162347 = CARTESIAN_POINT('',(102.61016,-106.199648,1.585)); +#162348 = CIRCLE('',#162349,7.500012668039E-02); +#162349 = AXIS2_PLACEMENT_3D('',#162350,#162351,#162352); +#162350 = CARTESIAN_POINT('',(102.55712605199,-106.2526802483,1.585)); +#162351 = DIRECTION('',(0.,0.,-1.)); +#162352 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#162353 = ORIENTED_EDGE('',*,*,#162354,.T.); +#162354 = EDGE_CURVE('',#162346,#162355,#162357,.T.); +#162355 = VERTEX_POINT('',#162356); +#162356 = CARTESIAN_POINT('',(102.649172,-106.238661,1.585)); +#162357 = LINE('',#162358,#162359); +#162358 = CARTESIAN_POINT('',(102.61016,-106.199648,1.585)); +#162359 = VECTOR('',#162360,1.); +#162360 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#162361 = ORIENTED_EDGE('',*,*,#162362,.T.); +#162362 = EDGE_CURVE('',#162355,#162363,#162365,.T.); +#162363 = VERTEX_POINT('',#162364); +#162364 = CARTESIAN_POINT('',(102.988888,-106.238661,1.585)); +#162365 = CIRCLE('',#162366,0.305620374329); +#162366 = AXIS2_PLACEMENT_3D('',#162367,#162368,#162369); +#162367 = CARTESIAN_POINT('',(102.81903,-105.98459,1.585)); +#162368 = DIRECTION('',(0.,0.,1.)); +#162369 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#162370 = ORIENTED_EDGE('',*,*,#162371,.T.); +#162371 = EDGE_CURVE('',#162363,#162372,#162374,.T.); +#162372 = VERTEX_POINT('',#162373); +#162373 = CARTESIAN_POINT('',(103.019295,-106.208253,1.585)); +#162374 = LINE('',#162375,#162376); +#162375 = CARTESIAN_POINT('',(102.988888,-106.238661,1.585)); +#162376 = VECTOR('',#162377,1.); +#162377 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162378 = ORIENTED_EDGE('',*,*,#162379,.T.); +#162379 = EDGE_CURVE('',#162372,#162380,#162382,.T.); +#162380 = VERTEX_POINT('',#162381); +#162381 = CARTESIAN_POINT('',(103.019296,-105.868536,1.585)); +#162382 = CIRCLE('',#162383,0.305616146029); +#162383 = AXIS2_PLACEMENT_3D('',#162384,#162385,#162386); +#162384 = CARTESIAN_POINT('',(102.76522992049,-106.0383937521,1.585)); +#162385 = DIRECTION('',(0.,-0.,1.)); +#162386 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162387 = ORIENTED_EDGE('',*,*,#162388,.T.); +#162388 = EDGE_CURVE('',#162380,#162389,#162391,.T.); +#162389 = VERTEX_POINT('',#162390); +#162390 = CARTESIAN_POINT('',(102.988889,-105.838129,1.585)); +#162391 = LINE('',#162392,#162393); +#162392 = CARTESIAN_POINT('',(103.019296,-105.868536,1.585)); +#162393 = VECTOR('',#162394,1.); +#162394 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162395 = ORIENTED_EDGE('',*,*,#162396,.T.); +#162396 = EDGE_CURVE('',#162389,#162397,#162399,.T.); +#162397 = VERTEX_POINT('',#162398); +#162398 = CARTESIAN_POINT('',(102.649172,-105.838129,1.585)); +#162399 = CIRCLE('',#162400,0.305621483548); +#162400 = AXIS2_PLACEMENT_3D('',#162401,#162402,#162403); +#162401 = CARTESIAN_POINT('',(102.8190305,-106.092201,1.585)); +#162402 = DIRECTION('',(0.,0.,1.)); +#162403 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#162404 = ORIENTED_EDGE('',*,*,#162405,.T.); +#162405 = EDGE_CURVE('',#162397,#162406,#162408,.T.); +#162406 = VERTEX_POINT('',#162407); +#162407 = CARTESIAN_POINT('',(102.592382,-105.890306,1.585)); +#162408 = LINE('',#162409,#162410); +#162409 = CARTESIAN_POINT('',(102.649172,-105.838129,1.585)); +#162410 = VECTOR('',#162411,1.); +#162411 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#162412 = ORIENTED_EDGE('',*,*,#162413,.T.); +#162413 = EDGE_CURVE('',#162406,#162414,#162416,.T.); +#162414 = VERTEX_POINT('',#162415); +#162415 = CARTESIAN_POINT('',(102.482476,-105.831349,1.585)); +#162416 = CIRCLE('',#162417,7.500024172471E-02); +#162417 = AXIS2_PLACEMENT_3D('',#162418,#162419,#162420); +#162418 = CARTESIAN_POINT('',(102.55712597002,-105.8241089561,1.585)); +#162419 = DIRECTION('',(-0.,0.,-1.)); +#162420 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#162421 = ORIENTED_EDGE('',*,*,#162422,.T.); +#162422 = EDGE_CURVE('',#162414,#162236,#162423,.T.); +#162423 = LINE('',#162424,#162425); +#162424 = CARTESIAN_POINT('',(102.482476,-105.831349,1.585)); +#162425 = VECTOR('',#162426,1.); +#162426 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#162427 = PLANE('',#162428); +#162428 = AXIS2_PLACEMENT_3D('',#162429,#162430,#162431); +#162429 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162430 = DIRECTION('',(0.,0.,1.)); +#162431 = DIRECTION('',(1.,0.,-0.)); +#162432 = SHELL_BASED_SURFACE_MODEL('',(#162433)); +#162433 = OPEN_SHELL('',(#162434)); +#162434 = ADVANCED_FACE('',(#162435),#162655,.T.); +#162435 = FACE_BOUND('',#162436,.F.); +#162436 = EDGE_LOOP('',(#162437,#162448,#162456,#162465,#162473,#162481, + #162489,#162497,#162506,#162514,#162523,#162531,#162539,#162547, + #162556,#162564,#162572,#162581,#162589,#162598,#162606,#162615, + #162623,#162632,#162640,#162649)); +#162437 = ORIENTED_EDGE('',*,*,#162438,.T.); +#162438 = EDGE_CURVE('',#162439,#162441,#162443,.T.); +#162439 = VERTEX_POINT('',#162440); +#162440 = CARTESIAN_POINT('',(105.580626,-105.32604,1.585)); +#162441 = VERTEX_POINT('',#162442); +#162442 = CARTESIAN_POINT('',(105.652364,-105.272919,1.585)); +#162443 = CIRCLE('',#162444,7.50033610077E-02); +#162444 = AXIS2_PLACEMENT_3D('',#162445,#162446,#162447); +#162445 = CARTESIAN_POINT('',(105.6523662707,-105.3479223609,1.585)); +#162446 = DIRECTION('',(0.,0.,-1.)); +#162447 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#162448 = ORIENTED_EDGE('',*,*,#162449,.T.); +#162449 = EDGE_CURVE('',#162441,#162450,#162452,.T.); +#162450 = VERTEX_POINT('',#162451); +#162451 = CARTESIAN_POINT('',(106.143186,-105.27436,1.585)); +#162452 = LINE('',#162453,#162454); +#162453 = CARTESIAN_POINT('',(105.652364,-105.272919,1.585)); +#162454 = VECTOR('',#162455,1.); +#162455 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#162456 = ORIENTED_EDGE('',*,*,#162457,.T.); +#162457 = EDGE_CURVE('',#162450,#162458,#162460,.T.); +#162458 = VERTEX_POINT('',#162459); +#162459 = CARTESIAN_POINT('',(106.128554,-105.422919,1.585)); +#162460 = CIRCLE('',#162461,7.500006711464E-02); +#162461 = AXIS2_PLACEMENT_3D('',#162462,#162463,#162464); +#162462 = CARTESIAN_POINT('',(106.12855406711,-105.3479189328,1.585)); +#162463 = DIRECTION('',(0.,0.,-1.)); +#162464 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162465 = ORIENTED_EDGE('',*,*,#162466,.T.); +#162466 = EDGE_CURVE('',#162458,#162467,#162469,.T.); +#162467 = VERTEX_POINT('',#162468); +#162468 = CARTESIAN_POINT('',(105.720238,-105.422919,1.585)); +#162469 = LINE('',#162470,#162471); +#162470 = CARTESIAN_POINT('',(106.128554,-105.422919,1.585)); +#162471 = VECTOR('',#162472,1.); +#162472 = DIRECTION('',(-1.,0.,0.)); +#162473 = ORIENTED_EDGE('',*,*,#162474,.T.); +#162474 = EDGE_CURVE('',#162467,#162475,#162477,.T.); +#162475 = VERTEX_POINT('',#162476); +#162476 = CARTESIAN_POINT('',(105.695419,-105.671109,1.585)); +#162477 = LINE('',#162478,#162479); +#162478 = CARTESIAN_POINT('',(105.720238,-105.422919,1.585)); +#162479 = VECTOR('',#162480,1.); +#162480 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#162481 = ORIENTED_EDGE('',*,*,#162482,.T.); +#162482 = EDGE_CURVE('',#162475,#162483,#162485,.T.); +#162483 = VERTEX_POINT('',#162484); +#162484 = CARTESIAN_POINT('',(105.73297,-105.655312,1.585)); +#162485 = LINE('',#162486,#162487); +#162486 = CARTESIAN_POINT('',(105.695419,-105.671109,1.585)); +#162487 = VECTOR('',#162488,1.); +#162488 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#162489 = ORIENTED_EDGE('',*,*,#162490,.T.); +#162490 = EDGE_CURVE('',#162483,#162491,#162493,.T.); +#162491 = VERTEX_POINT('',#162492); +#162492 = CARTESIAN_POINT('',(106.005506,-105.656534,1.585)); +#162493 = LINE('',#162494,#162495); +#162494 = CARTESIAN_POINT('',(105.73297,-105.655312,1.585)); +#162495 = VECTOR('',#162496,1.); +#162496 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#162497 = ORIENTED_EDGE('',*,*,#162498,.T.); +#162498 = EDGE_CURVE('',#162491,#162499,#162501,.T.); +#162499 = VERTEX_POINT('',#162500); +#162500 = CARTESIAN_POINT('',(106.249732,-105.904715,1.585)); +#162501 = CIRCLE('',#162502,0.348625649748); +#162502 = AXIS2_PLACEMENT_3D('',#162503,#162504,#162505); +#162503 = CARTESIAN_POINT('',(105.91233404586,-105.9924786838,1.585)); +#162504 = DIRECTION('',(0.,0.,-1.)); +#162505 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162506 = ORIENTED_EDGE('',*,*,#162507,.T.); +#162507 = EDGE_CURVE('',#162499,#162508,#162510,.T.); +#162508 = VERTEX_POINT('',#162509); +#162509 = CARTESIAN_POINT('',(106.24851,-106.177252,1.585)); +#162510 = LINE('',#162511,#162512); +#162511 = CARTESIAN_POINT('',(106.249732,-105.904715,1.585)); +#162512 = VECTOR('',#162513,1.); +#162513 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162514 = ORIENTED_EDGE('',*,*,#162515,.T.); +#162515 = EDGE_CURVE('',#162508,#162516,#162518,.T.); +#162516 = VERTEX_POINT('',#162517); +#162517 = CARTESIAN_POINT('',(106.000329,-106.421478,1.585)); +#162518 = CIRCLE('',#162519,0.348635327447); +#162519 = AXIS2_PLACEMENT_3D('',#162520,#162521,#162522); +#162520 = CARTESIAN_POINT('',(105.91255748129,-106.0840720841,1.585)); +#162521 = DIRECTION('',(0.,0.,-1.)); +#162522 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162523 = ORIENTED_EDGE('',*,*,#162524,.T.); +#162524 = EDGE_CURVE('',#162516,#162525,#162527,.T.); +#162525 = VERTEX_POINT('',#162526); +#162526 = CARTESIAN_POINT('',(105.727792,-106.420256,1.585)); +#162527 = LINE('',#162528,#162529); +#162528 = CARTESIAN_POINT('',(106.000329,-106.421478,1.585)); +#162529 = VECTOR('',#162530,1.); +#162530 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#162531 = ORIENTED_EDGE('',*,*,#162532,.T.); +#162532 = EDGE_CURVE('',#162525,#162533,#162535,.T.); +#162533 = VERTEX_POINT('',#162534); +#162534 = CARTESIAN_POINT('',(105.626787,-106.369054,1.585)); +#162535 = LINE('',#162536,#162537); +#162536 = CARTESIAN_POINT('',(105.727792,-106.420256,1.585)); +#162537 = VECTOR('',#162538,1.); +#162538 = DIRECTION('',(-0.891942715827,0.452148417759,0.)); +#162539 = ORIENTED_EDGE('',*,*,#162540,.T.); +#162540 = EDGE_CURVE('',#162533,#162541,#162543,.T.); +#162541 = VERTEX_POINT('',#162542); +#162542 = CARTESIAN_POINT('',(105.628068,-106.365964,1.585)); +#162543 = LINE('',#162544,#162545); +#162544 = CARTESIAN_POINT('',(105.626787,-106.369054,1.585)); +#162545 = VECTOR('',#162546,1.); +#162546 = DIRECTION('',(0.382959025184,0.923765330065,0.)); +#162547 = ORIENTED_EDGE('',*,*,#162548,.T.); +#162548 = EDGE_CURVE('',#162541,#162549,#162551,.T.); +#162549 = VERTEX_POINT('',#162550); +#162550 = CARTESIAN_POINT('',(105.564286,-106.21198,1.585)); +#162551 = CIRCLE('',#162552,0.149999366947); +#162552 = AXIS2_PLACEMENT_3D('',#162553,#162554,#162555); +#162553 = CARTESIAN_POINT('',(105.48095094324,-106.3367,1.585)); +#162554 = DIRECTION('',(0.,-0.,1.)); +#162555 = DIRECTION('',(0.980784517629,-0.1950941567,-0.)); +#162556 = ORIENTED_EDGE('',*,*,#162557,.T.); +#162557 = EDGE_CURVE('',#162549,#162558,#162560,.T.); +#162558 = VERTEX_POINT('',#162559); +#162559 = CARTESIAN_POINT('',(105.548115,-106.205281,1.585)); +#162560 = LINE('',#162561,#162562); +#162561 = CARTESIAN_POINT('',(105.564286,-106.21198,1.585)); +#162562 = VECTOR('',#162563,1.); +#162563 = DIRECTION('',(-0.923864332505,0.382720126365,0.)); +#162564 = ORIENTED_EDGE('',*,*,#162565,.T.); +#162565 = EDGE_CURVE('',#162558,#162566,#162568,.T.); +#162566 = VERTEX_POINT('',#162567); +#162567 = CARTESIAN_POINT('',(105.563078,-106.190319,1.585)); +#162568 = LINE('',#162569,#162570); +#162569 = CARTESIAN_POINT('',(105.548115,-106.205281,1.585)); +#162570 = VECTOR('',#162571,1.); +#162571 = DIRECTION('',(0.707130410091,0.707083151492,0.)); +#162572 = ORIENTED_EDGE('',*,*,#162573,.T.); +#162573 = EDGE_CURVE('',#162566,#162574,#162576,.T.); +#162574 = VERTEX_POINT('',#162575); +#162575 = CARTESIAN_POINT('',(105.657779,-106.199648,1.585)); +#162576 = CIRCLE('',#162577,7.500097510826E-02); +#162577 = AXIS2_PLACEMENT_3D('',#162578,#162579,#162580); +#162578 = CARTESIAN_POINT('',(105.60474470643,-106.2526811026,1.585)); +#162579 = DIRECTION('',(0.,0.,-1.)); +#162580 = DIRECTION('',(-0.555548862809,0.831483891024,0.)); +#162581 = ORIENTED_EDGE('',*,*,#162582,.T.); +#162582 = EDGE_CURVE('',#162574,#162583,#162585,.T.); +#162583 = VERTEX_POINT('',#162584); +#162584 = CARTESIAN_POINT('',(105.696791,-106.238661,1.585)); +#162585 = LINE('',#162586,#162587); +#162586 = CARTESIAN_POINT('',(105.657779,-106.199648,1.585)); +#162587 = VECTOR('',#162588,1.); +#162588 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#162589 = ORIENTED_EDGE('',*,*,#162590,.T.); +#162590 = EDGE_CURVE('',#162583,#162591,#162593,.T.); +#162591 = VERTEX_POINT('',#162592); +#162592 = CARTESIAN_POINT('',(106.036507,-106.238661,1.585)); +#162593 = CIRCLE('',#162594,0.305620374329); +#162594 = AXIS2_PLACEMENT_3D('',#162595,#162596,#162597); +#162595 = CARTESIAN_POINT('',(105.866649,-105.98459,1.585)); +#162596 = DIRECTION('',(0.,0.,1.)); +#162597 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#162598 = ORIENTED_EDGE('',*,*,#162599,.T.); +#162599 = EDGE_CURVE('',#162591,#162600,#162602,.T.); +#162600 = VERTEX_POINT('',#162601); +#162601 = CARTESIAN_POINT('',(106.066914,-106.208253,1.585)); +#162602 = LINE('',#162603,#162604); +#162603 = CARTESIAN_POINT('',(106.036507,-106.238661,1.585)); +#162604 = VECTOR('',#162605,1.); +#162605 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162606 = ORIENTED_EDGE('',*,*,#162607,.T.); +#162607 = EDGE_CURVE('',#162600,#162608,#162610,.T.); +#162608 = VERTEX_POINT('',#162609); +#162609 = CARTESIAN_POINT('',(106.066915,-105.868536,1.585)); +#162610 = CIRCLE('',#162611,0.305616146029); +#162611 = AXIS2_PLACEMENT_3D('',#162612,#162613,#162614); +#162612 = CARTESIAN_POINT('',(105.81284892049,-106.0383937521,1.585)); +#162613 = DIRECTION('',(0.,-0.,1.)); +#162614 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162615 = ORIENTED_EDGE('',*,*,#162616,.T.); +#162616 = EDGE_CURVE('',#162608,#162617,#162619,.T.); +#162617 = VERTEX_POINT('',#162618); +#162618 = CARTESIAN_POINT('',(106.036508,-105.838129,1.585)); +#162619 = LINE('',#162620,#162621); +#162620 = CARTESIAN_POINT('',(106.066915,-105.868536,1.585)); +#162621 = VECTOR('',#162622,1.); +#162622 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162623 = ORIENTED_EDGE('',*,*,#162624,.T.); +#162624 = EDGE_CURVE('',#162617,#162625,#162627,.T.); +#162625 = VERTEX_POINT('',#162626); +#162626 = CARTESIAN_POINT('',(105.696791,-105.838129,1.585)); +#162627 = CIRCLE('',#162628,0.305621483548); +#162628 = AXIS2_PLACEMENT_3D('',#162629,#162630,#162631); +#162629 = CARTESIAN_POINT('',(105.8666495,-106.092201,1.585)); +#162630 = DIRECTION('',(0.,0.,1.)); +#162631 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#162632 = ORIENTED_EDGE('',*,*,#162633,.T.); +#162633 = EDGE_CURVE('',#162625,#162634,#162636,.T.); +#162634 = VERTEX_POINT('',#162635); +#162635 = CARTESIAN_POINT('',(105.640001,-105.890306,1.585)); +#162636 = LINE('',#162637,#162638); +#162637 = CARTESIAN_POINT('',(105.696791,-105.838129,1.585)); +#162638 = VECTOR('',#162639,1.); +#162639 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#162640 = ORIENTED_EDGE('',*,*,#162641,.T.); +#162641 = EDGE_CURVE('',#162634,#162642,#162644,.T.); +#162642 = VERTEX_POINT('',#162643); +#162643 = CARTESIAN_POINT('',(105.530095,-105.831349,1.585)); +#162644 = CIRCLE('',#162645,7.500024172471E-02); +#162645 = AXIS2_PLACEMENT_3D('',#162646,#162647,#162648); +#162646 = CARTESIAN_POINT('',(105.60474497002,-105.8241089561,1.585)); +#162647 = DIRECTION('',(-0.,0.,-1.)); +#162648 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#162649 = ORIENTED_EDGE('',*,*,#162650,.T.); +#162650 = EDGE_CURVE('',#162642,#162439,#162651,.T.); +#162651 = LINE('',#162652,#162653); +#162652 = CARTESIAN_POINT('',(105.530095,-105.831349,1.585)); +#162653 = VECTOR('',#162654,1.); +#162654 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#162655 = PLANE('',#162656); +#162656 = AXIS2_PLACEMENT_3D('',#162657,#162658,#162659); +#162657 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162658 = DIRECTION('',(0.,0.,1.)); +#162659 = DIRECTION('',(1.,0.,-0.)); +#162660 = SHELL_BASED_SURFACE_MODEL('',(#162661)); +#162661 = OPEN_SHELL('',(#162662)); +#162662 = ADVANCED_FACE('',(#162663,#162806),#162876,.T.); +#162663 = FACE_BOUND('',#162664,.F.); +#162664 = EDGE_LOOP('',(#162665,#162676,#162684,#162692,#162701,#162709, + #162717,#162725,#162733,#162741,#162749,#162757,#162766,#162774, + #162783,#162791,#162800)); +#162665 = ORIENTED_EDGE('',*,*,#162666,.T.); +#162666 = EDGE_CURVE('',#162667,#162669,#162671,.T.); +#162667 = VERTEX_POINT('',#162668); +#162668 = CARTESIAN_POINT('',(106.484365,-105.7583,1.585)); +#162669 = VERTEX_POINT('',#162670); +#162670 = CARTESIAN_POINT('',(106.714061,-105.328456,1.585)); +#162671 = CIRCLE('',#162672,0.610092147705); +#162672 = AXIS2_PLACEMENT_3D('',#162673,#162674,#162675); +#162673 = CARTESIAN_POINT('',(107.09251174024,-105.8069823481,1.585)); +#162674 = DIRECTION('',(0.,0.,-1.)); +#162675 = DIRECTION('',(-0.99681128913,7.97950741736E-02,0.)); +#162676 = ORIENTED_EDGE('',*,*,#162677,.T.); +#162677 = EDGE_CURVE('',#162669,#162678,#162680,.T.); +#162678 = VERTEX_POINT('',#162679); +#162679 = CARTESIAN_POINT('',(106.828208,-105.27436,1.585)); +#162680 = LINE('',#162681,#162682); +#162681 = CARTESIAN_POINT('',(106.714061,-105.328456,1.585)); +#162682 = VECTOR('',#162683,1.); +#162683 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#162684 = ORIENTED_EDGE('',*,*,#162685,.T.); +#162685 = EDGE_CURVE('',#162678,#162686,#162688,.T.); +#162686 = VERTEX_POINT('',#162687); +#162687 = CARTESIAN_POINT('',(107.047948,-105.27436,1.585)); +#162688 = LINE('',#162689,#162690); +#162689 = CARTESIAN_POINT('',(106.828208,-105.27436,1.585)); +#162690 = VECTOR('',#162691,1.); +#162691 = DIRECTION('',(1.,0.,0.)); +#162692 = ORIENTED_EDGE('',*,*,#162693,.T.); +#162693 = EDGE_CURVE('',#162686,#162694,#162696,.T.); +#162694 = VERTEX_POINT('',#162695); +#162695 = CARTESIAN_POINT('',(107.033316,-105.422919,1.585)); +#162696 = CIRCLE('',#162697,7.500006711464E-02); +#162697 = AXIS2_PLACEMENT_3D('',#162698,#162699,#162700); +#162698 = CARTESIAN_POINT('',(107.03331606711,-105.3479189328,1.585)); +#162699 = DIRECTION('',(0.,0.,-1.)); +#162700 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162701 = ORIENTED_EDGE('',*,*,#162702,.T.); +#162702 = EDGE_CURVE('',#162694,#162703,#162705,.T.); +#162703 = VERTEX_POINT('',#162704); +#162704 = CARTESIAN_POINT('',(106.860545,-105.422919,1.585)); +#162705 = LINE('',#162706,#162707); +#162706 = CARTESIAN_POINT('',(107.033316,-105.422919,1.585)); +#162707 = VECTOR('',#162708,1.); +#162708 = DIRECTION('',(-1.,0.,0.)); +#162709 = ORIENTED_EDGE('',*,*,#162710,.T.); +#162710 = EDGE_CURVE('',#162703,#162711,#162713,.T.); +#162711 = VERTEX_POINT('',#162712); +#162712 = CARTESIAN_POINT('',(106.792029,-105.457177,1.585)); +#162713 = LINE('',#162714,#162715); +#162714 = CARTESIAN_POINT('',(106.860545,-105.422919,1.585)); +#162715 = VECTOR('',#162716,1.); +#162716 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#162717 = ORIENTED_EDGE('',*,*,#162718,.T.); +#162718 = EDGE_CURVE('',#162711,#162719,#162721,.T.); +#162719 = VERTEX_POINT('',#162720); +#162720 = CARTESIAN_POINT('',(106.758267,-105.490938,1.585)); +#162721 = LINE('',#162722,#162723); +#162722 = CARTESIAN_POINT('',(106.792029,-105.457177,1.585)); +#162723 = VECTOR('',#162724,1.); +#162724 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#162725 = ORIENTED_EDGE('',*,*,#162726,.T.); +#162726 = EDGE_CURVE('',#162719,#162727,#162729,.T.); +#162727 = VERTEX_POINT('',#162728); +#162728 = CARTESIAN_POINT('',(106.674355,-105.616807,1.585)); +#162729 = LINE('',#162730,#162731); +#162730 = CARTESIAN_POINT('',(106.758267,-105.490938,1.585)); +#162731 = VECTOR('',#162732,1.); +#162732 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#162733 = ORIENTED_EDGE('',*,*,#162734,.T.); +#162734 = EDGE_CURVE('',#162727,#162735,#162737,.T.); +#162735 = VERTEX_POINT('',#162736); +#162736 = CARTESIAN_POINT('',(106.655831,-105.690904,1.585)); +#162737 = LINE('',#162738,#162739); +#162738 = CARTESIAN_POINT('',(106.674355,-105.616807,1.585)); +#162739 = VECTOR('',#162740,1.); +#162740 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#162741 = ORIENTED_EDGE('',*,*,#162742,.T.); +#162742 = EDGE_CURVE('',#162735,#162743,#162745,.T.); +#162743 = VERTEX_POINT('',#162744); +#162744 = CARTESIAN_POINT('',(106.73297,-105.655312,1.585)); +#162745 = LINE('',#162746,#162747); +#162746 = CARTESIAN_POINT('',(106.655831,-105.690904,1.585)); +#162747 = VECTOR('',#162748,1.); +#162748 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#162749 = ORIENTED_EDGE('',*,*,#162750,.T.); +#162750 = EDGE_CURVE('',#162743,#162751,#162753,.T.); +#162751 = VERTEX_POINT('',#162752); +#162752 = CARTESIAN_POINT('',(106.957887,-105.656534,1.585)); +#162753 = LINE('',#162754,#162755); +#162754 = CARTESIAN_POINT('',(106.73297,-105.655312,1.585)); +#162755 = VECTOR('',#162756,1.); +#162756 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#162757 = ORIENTED_EDGE('',*,*,#162758,.T.); +#162758 = EDGE_CURVE('',#162751,#162759,#162761,.T.); +#162759 = VERTEX_POINT('',#162760); +#162760 = CARTESIAN_POINT('',(107.202113,-105.904715,1.585)); +#162761 = CIRCLE('',#162762,0.348625649748); +#162762 = AXIS2_PLACEMENT_3D('',#162763,#162764,#162765); +#162763 = CARTESIAN_POINT('',(106.86471504586,-105.9924786838,1.585)); +#162764 = DIRECTION('',(0.,0.,-1.)); +#162765 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162766 = ORIENTED_EDGE('',*,*,#162767,.T.); +#162767 = EDGE_CURVE('',#162759,#162768,#162770,.T.); +#162768 = VERTEX_POINT('',#162769); +#162769 = CARTESIAN_POINT('',(107.200891,-106.177252,1.585)); +#162770 = LINE('',#162771,#162772); +#162771 = CARTESIAN_POINT('',(107.202113,-105.904715,1.585)); +#162772 = VECTOR('',#162773,1.); +#162773 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162774 = ORIENTED_EDGE('',*,*,#162775,.T.); +#162775 = EDGE_CURVE('',#162768,#162776,#162778,.T.); +#162776 = VERTEX_POINT('',#162777); +#162777 = CARTESIAN_POINT('',(106.95271,-106.421478,1.585)); +#162778 = CIRCLE('',#162779,0.348635327447); +#162779 = AXIS2_PLACEMENT_3D('',#162780,#162781,#162782); +#162780 = CARTESIAN_POINT('',(106.86493848129,-106.0840720841,1.585)); +#162781 = DIRECTION('',(0.,0.,-1.)); +#162782 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162783 = ORIENTED_EDGE('',*,*,#162784,.T.); +#162784 = EDGE_CURVE('',#162776,#162785,#162787,.T.); +#162785 = VERTEX_POINT('',#162786); +#162786 = CARTESIAN_POINT('',(106.727792,-106.420256,1.585)); +#162787 = LINE('',#162788,#162789); +#162788 = CARTESIAN_POINT('',(106.95271,-106.421478,1.585)); +#162789 = VECTOR('',#162790,1.); +#162790 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#162791 = ORIENTED_EDGE('',*,*,#162792,.T.); +#162792 = EDGE_CURVE('',#162785,#162793,#162795,.T.); +#162793 = VERTEX_POINT('',#162794); +#162794 = CARTESIAN_POINT('',(106.483567,-106.172074,1.585)); +#162795 = CIRCLE('',#162796,0.348628446662); +#162796 = AXIS2_PLACEMENT_3D('',#162797,#162798,#162799); +#162797 = CARTESIAN_POINT('',(106.82096761322,-106.0843094284,1.585)); +#162798 = DIRECTION('',(0.,0.,-1.)); +#162799 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#162800 = ORIENTED_EDGE('',*,*,#162801,.T.); +#162801 = EDGE_CURVE('',#162793,#162667,#162802,.T.); +#162802 = LINE('',#162803,#162804); +#162803 = CARTESIAN_POINT('',(106.483567,-106.172074,1.585)); +#162804 = VECTOR('',#162805,1.); +#162805 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#162806 = FACE_BOUND('',#162807,.F.); +#162807 = EDGE_LOOP('',(#162808,#162819,#162827,#162836,#162844,#162853, + #162861,#162870)); +#162808 = ORIENTED_EDGE('',*,*,#162809,.T.); +#162809 = EDGE_CURVE('',#162810,#162812,#162814,.T.); +#162810 = VERTEX_POINT('',#162811); +#162811 = CARTESIAN_POINT('',(106.988889,-105.838129,1.585)); +#162812 = VERTEX_POINT('',#162813); +#162813 = CARTESIAN_POINT('',(106.696791,-105.838129,1.585)); +#162814 = CIRCLE('',#162815,0.252889603602); +#162815 = AXIS2_PLACEMENT_3D('',#162816,#162817,#162818); +#162816 = CARTESIAN_POINT('',(106.84284,-106.044582,1.585)); +#162817 = DIRECTION('',(0.,0.,1.)); +#162818 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#162819 = ORIENTED_EDGE('',*,*,#162820,.T.); +#162820 = EDGE_CURVE('',#162812,#162821,#162823,.T.); +#162821 = VERTEX_POINT('',#162822); +#162822 = CARTESIAN_POINT('',(106.666384,-105.868536,1.585)); +#162823 = LINE('',#162824,#162825); +#162824 = CARTESIAN_POINT('',(106.696791,-105.838129,1.585)); +#162825 = VECTOR('',#162826,1.); +#162826 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#162827 = ORIENTED_EDGE('',*,*,#162828,.T.); +#162828 = EDGE_CURVE('',#162821,#162829,#162831,.T.); +#162829 = VERTEX_POINT('',#162830); +#162830 = CARTESIAN_POINT('',(106.666384,-106.208253,1.585)); +#162831 = CIRCLE('',#162832,0.305621483548); +#162832 = AXIS2_PLACEMENT_3D('',#162833,#162834,#162835); +#162833 = CARTESIAN_POINT('',(106.920456,-106.0383945,1.585)); +#162834 = DIRECTION('',(0.,0.,1.)); +#162835 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#162836 = ORIENTED_EDGE('',*,*,#162837,.T.); +#162837 = EDGE_CURVE('',#162829,#162838,#162840,.T.); +#162838 = VERTEX_POINT('',#162839); +#162839 = CARTESIAN_POINT('',(106.696791,-106.238661,1.585)); +#162840 = LINE('',#162841,#162842); +#162841 = CARTESIAN_POINT('',(106.666384,-106.208253,1.585)); +#162842 = VECTOR('',#162843,1.); +#162843 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#162844 = ORIENTED_EDGE('',*,*,#162845,.T.); +#162845 = EDGE_CURVE('',#162838,#162846,#162848,.T.); +#162846 = VERTEX_POINT('',#162847); +#162847 = CARTESIAN_POINT('',(106.988888,-106.238661,1.585)); +#162848 = CIRCLE('',#162849,0.252888498466); +#162849 = AXIS2_PLACEMENT_3D('',#162850,#162851,#162852); +#162850 = CARTESIAN_POINT('',(106.8428395,-106.032209,1.585)); +#162851 = DIRECTION('',(0.,0.,1.)); +#162852 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#162853 = ORIENTED_EDGE('',*,*,#162854,.T.); +#162854 = EDGE_CURVE('',#162846,#162855,#162857,.T.); +#162855 = VERTEX_POINT('',#162856); +#162856 = CARTESIAN_POINT('',(107.019295,-106.208253,1.585)); +#162857 = LINE('',#162858,#162859); +#162858 = CARTESIAN_POINT('',(106.988888,-106.238661,1.585)); +#162859 = VECTOR('',#162860,1.); +#162860 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162861 = ORIENTED_EDGE('',*,*,#162862,.T.); +#162862 = EDGE_CURVE('',#162855,#162863,#162865,.T.); +#162863 = VERTEX_POINT('',#162864); +#162864 = CARTESIAN_POINT('',(107.019296,-105.868536,1.585)); +#162865 = CIRCLE('',#162866,0.305616146029); +#162866 = AXIS2_PLACEMENT_3D('',#162867,#162868,#162869); +#162867 = CARTESIAN_POINT('',(106.76522992049,-106.0383937521,1.585)); +#162868 = DIRECTION('',(0.,-0.,1.)); +#162869 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162870 = ORIENTED_EDGE('',*,*,#162871,.T.); +#162871 = EDGE_CURVE('',#162863,#162810,#162872,.T.); +#162872 = LINE('',#162873,#162874); +#162873 = CARTESIAN_POINT('',(107.019296,-105.868536,1.585)); +#162874 = VECTOR('',#162875,1.); +#162875 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162876 = PLANE('',#162877); +#162877 = AXIS2_PLACEMENT_3D('',#162878,#162879,#162880); +#162878 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162879 = DIRECTION('',(0.,0.,1.)); +#162880 = DIRECTION('',(1.,0.,-0.)); +#162881 = SHELL_BASED_SURFACE_MODEL('',(#162882)); +#162882 = OPEN_SHELL('',(#162883)); +#162883 = ADVANCED_FACE('',(#162884,#163027),#163097,.T.); +#162884 = FACE_BOUND('',#162885,.F.); +#162885 = EDGE_LOOP('',(#162886,#162897,#162905,#162913,#162922,#162930, + #162938,#162946,#162954,#162962,#162970,#162978,#162987,#162995, + #163004,#163012,#163021)); +#162886 = ORIENTED_EDGE('',*,*,#162887,.T.); +#162887 = EDGE_CURVE('',#162888,#162890,#162892,.T.); +#162888 = VERTEX_POINT('',#162889); +#162889 = CARTESIAN_POINT('',(179.181984,-105.7583,1.585)); +#162890 = VERTEX_POINT('',#162891); +#162891 = CARTESIAN_POINT('',(179.41168,-105.328456,1.585)); +#162892 = CIRCLE('',#162893,0.610092147705); +#162893 = AXIS2_PLACEMENT_3D('',#162894,#162895,#162896); +#162894 = CARTESIAN_POINT('',(179.79013074024,-105.8069823481,1.585)); +#162895 = DIRECTION('',(0.,0.,-1.)); +#162896 = DIRECTION('',(-0.99681128913,7.979507417374E-02,0.)); +#162897 = ORIENTED_EDGE('',*,*,#162898,.T.); +#162898 = EDGE_CURVE('',#162890,#162899,#162901,.T.); +#162899 = VERTEX_POINT('',#162900); +#162900 = CARTESIAN_POINT('',(179.525827,-105.27436,1.585)); +#162901 = LINE('',#162902,#162903); +#162902 = CARTESIAN_POINT('',(179.41168,-105.328456,1.585)); +#162903 = VECTOR('',#162904,1.); +#162904 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#162905 = ORIENTED_EDGE('',*,*,#162906,.T.); +#162906 = EDGE_CURVE('',#162899,#162907,#162909,.T.); +#162907 = VERTEX_POINT('',#162908); +#162908 = CARTESIAN_POINT('',(179.745567,-105.27436,1.585)); +#162909 = LINE('',#162910,#162911); +#162910 = CARTESIAN_POINT('',(179.525827,-105.27436,1.585)); +#162911 = VECTOR('',#162912,1.); +#162912 = DIRECTION('',(1.,0.,0.)); +#162913 = ORIENTED_EDGE('',*,*,#162914,.T.); +#162914 = EDGE_CURVE('',#162907,#162915,#162917,.T.); +#162915 = VERTEX_POINT('',#162916); +#162916 = CARTESIAN_POINT('',(179.730935,-105.422919,1.585)); +#162917 = CIRCLE('',#162918,7.500006711462E-02); +#162918 = AXIS2_PLACEMENT_3D('',#162919,#162920,#162921); +#162919 = CARTESIAN_POINT('',(179.73093506711,-105.3479189328,1.585)); +#162920 = DIRECTION('',(0.,0.,-1.)); +#162921 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162922 = ORIENTED_EDGE('',*,*,#162923,.T.); +#162923 = EDGE_CURVE('',#162915,#162924,#162926,.T.); +#162924 = VERTEX_POINT('',#162925); +#162925 = CARTESIAN_POINT('',(179.558164,-105.422919,1.585)); +#162926 = LINE('',#162927,#162928); +#162927 = CARTESIAN_POINT('',(179.730935,-105.422919,1.585)); +#162928 = VECTOR('',#162929,1.); +#162929 = DIRECTION('',(-1.,0.,0.)); +#162930 = ORIENTED_EDGE('',*,*,#162931,.T.); +#162931 = EDGE_CURVE('',#162924,#162932,#162934,.T.); +#162932 = VERTEX_POINT('',#162933); +#162933 = CARTESIAN_POINT('',(179.489648,-105.457177,1.585)); +#162934 = LINE('',#162935,#162936); +#162935 = CARTESIAN_POINT('',(179.558164,-105.422919,1.585)); +#162936 = VECTOR('',#162937,1.); +#162937 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#162938 = ORIENTED_EDGE('',*,*,#162939,.T.); +#162939 = EDGE_CURVE('',#162932,#162940,#162942,.T.); +#162940 = VERTEX_POINT('',#162941); +#162941 = CARTESIAN_POINT('',(179.455886,-105.490938,1.585)); +#162942 = LINE('',#162943,#162944); +#162943 = CARTESIAN_POINT('',(179.489648,-105.457177,1.585)); +#162944 = VECTOR('',#162945,1.); +#162945 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#162946 = ORIENTED_EDGE('',*,*,#162947,.T.); +#162947 = EDGE_CURVE('',#162940,#162948,#162950,.T.); +#162948 = VERTEX_POINT('',#162949); +#162949 = CARTESIAN_POINT('',(179.371974,-105.616807,1.585)); +#162950 = LINE('',#162951,#162952); +#162951 = CARTESIAN_POINT('',(179.455886,-105.490938,1.585)); +#162952 = VECTOR('',#162953,1.); +#162953 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#162954 = ORIENTED_EDGE('',*,*,#162955,.T.); +#162955 = EDGE_CURVE('',#162948,#162956,#162958,.T.); +#162956 = VERTEX_POINT('',#162957); +#162957 = CARTESIAN_POINT('',(179.35345,-105.690904,1.585)); +#162958 = LINE('',#162959,#162960); +#162959 = CARTESIAN_POINT('',(179.371974,-105.616807,1.585)); +#162960 = VECTOR('',#162961,1.); +#162961 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#162962 = ORIENTED_EDGE('',*,*,#162963,.T.); +#162963 = EDGE_CURVE('',#162956,#162964,#162966,.T.); +#162964 = VERTEX_POINT('',#162965); +#162965 = CARTESIAN_POINT('',(179.430589,-105.655312,1.585)); +#162966 = LINE('',#162967,#162968); +#162967 = CARTESIAN_POINT('',(179.35345,-105.690904,1.585)); +#162968 = VECTOR('',#162969,1.); +#162969 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#162970 = ORIENTED_EDGE('',*,*,#162971,.T.); +#162971 = EDGE_CURVE('',#162964,#162972,#162974,.T.); +#162972 = VERTEX_POINT('',#162973); +#162973 = CARTESIAN_POINT('',(179.655506,-105.656534,1.585)); +#162974 = LINE('',#162975,#162976); +#162975 = CARTESIAN_POINT('',(179.430589,-105.655312,1.585)); +#162976 = VECTOR('',#162977,1.); +#162977 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#162978 = ORIENTED_EDGE('',*,*,#162979,.T.); +#162979 = EDGE_CURVE('',#162972,#162980,#162982,.T.); +#162980 = VERTEX_POINT('',#162981); +#162981 = CARTESIAN_POINT('',(179.899732,-105.904715,1.585)); +#162982 = CIRCLE('',#162983,0.348625649748); +#162983 = AXIS2_PLACEMENT_3D('',#162984,#162985,#162986); +#162984 = CARTESIAN_POINT('',(179.56233404586,-105.9924786838,1.585)); +#162985 = DIRECTION('',(0.,0.,-1.)); +#162986 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162987 = ORIENTED_EDGE('',*,*,#162988,.T.); +#162988 = EDGE_CURVE('',#162980,#162989,#162991,.T.); +#162989 = VERTEX_POINT('',#162990); +#162990 = CARTESIAN_POINT('',(179.89851,-106.177252,1.585)); +#162991 = LINE('',#162992,#162993); +#162992 = CARTESIAN_POINT('',(179.899732,-105.904715,1.585)); +#162993 = VECTOR('',#162994,1.); +#162994 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#162995 = ORIENTED_EDGE('',*,*,#162996,.T.); +#162996 = EDGE_CURVE('',#162989,#162997,#162999,.T.); +#162997 = VERTEX_POINT('',#162998); +#162998 = CARTESIAN_POINT('',(179.650329,-106.421478,1.585)); +#162999 = CIRCLE('',#163000,0.348635327447); +#163000 = AXIS2_PLACEMENT_3D('',#163001,#163002,#163003); +#163001 = CARTESIAN_POINT('',(179.56255748129,-106.0840720841,1.585)); +#163002 = DIRECTION('',(0.,0.,-1.)); +#163003 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#163004 = ORIENTED_EDGE('',*,*,#163005,.T.); +#163005 = EDGE_CURVE('',#162997,#163006,#163008,.T.); +#163006 = VERTEX_POINT('',#163007); +#163007 = CARTESIAN_POINT('',(179.425411,-106.420256,1.585)); +#163008 = LINE('',#163009,#163010); +#163009 = CARTESIAN_POINT('',(179.650329,-106.421478,1.585)); +#163010 = VECTOR('',#163011,1.); +#163011 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#163012 = ORIENTED_EDGE('',*,*,#163013,.T.); +#163013 = EDGE_CURVE('',#163006,#163014,#163016,.T.); +#163014 = VERTEX_POINT('',#163015); +#163015 = CARTESIAN_POINT('',(179.181186,-106.172074,1.585)); +#163016 = CIRCLE('',#163017,0.348628446662); +#163017 = AXIS2_PLACEMENT_3D('',#163018,#163019,#163020); +#163018 = CARTESIAN_POINT('',(179.51858661322,-106.0843094284,1.585)); +#163019 = DIRECTION('',(0.,0.,-1.)); +#163020 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#163021 = ORIENTED_EDGE('',*,*,#163022,.T.); +#163022 = EDGE_CURVE('',#163014,#162888,#163023,.T.); +#163023 = LINE('',#163024,#163025); +#163024 = CARTESIAN_POINT('',(179.181186,-106.172074,1.585)); +#163025 = VECTOR('',#163026,1.); +#163026 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#163027 = FACE_BOUND('',#163028,.F.); +#163028 = EDGE_LOOP('',(#163029,#163040,#163048,#163057,#163065,#163074, + #163082,#163091)); +#163029 = ORIENTED_EDGE('',*,*,#163030,.T.); +#163030 = EDGE_CURVE('',#163031,#163033,#163035,.T.); +#163031 = VERTEX_POINT('',#163032); +#163032 = CARTESIAN_POINT('',(179.686508,-105.838129,1.585)); +#163033 = VERTEX_POINT('',#163034); +#163034 = CARTESIAN_POINT('',(179.39441,-105.838129,1.585)); +#163035 = CIRCLE('',#163036,0.252889603602); +#163036 = AXIS2_PLACEMENT_3D('',#163037,#163038,#163039); +#163037 = CARTESIAN_POINT('',(179.540459,-106.044582,1.585)); +#163038 = DIRECTION('',(0.,0.,1.)); +#163039 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#163040 = ORIENTED_EDGE('',*,*,#163041,.T.); +#163041 = EDGE_CURVE('',#163033,#163042,#163044,.T.); +#163042 = VERTEX_POINT('',#163043); +#163043 = CARTESIAN_POINT('',(179.364003,-105.868536,1.585)); +#163044 = LINE('',#163045,#163046); +#163045 = CARTESIAN_POINT('',(179.39441,-105.838129,1.585)); +#163046 = VECTOR('',#163047,1.); +#163047 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#163048 = ORIENTED_EDGE('',*,*,#163049,.T.); +#163049 = EDGE_CURVE('',#163042,#163050,#163052,.T.); +#163050 = VERTEX_POINT('',#163051); +#163051 = CARTESIAN_POINT('',(179.364003,-106.208253,1.585)); +#163052 = CIRCLE('',#163053,0.305621483548); +#163053 = AXIS2_PLACEMENT_3D('',#163054,#163055,#163056); +#163054 = CARTESIAN_POINT('',(179.618075,-106.0383945,1.585)); +#163055 = DIRECTION('',(0.,0.,1.)); +#163056 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#163057 = ORIENTED_EDGE('',*,*,#163058,.T.); +#163058 = EDGE_CURVE('',#163050,#163059,#163061,.T.); +#163059 = VERTEX_POINT('',#163060); +#163060 = CARTESIAN_POINT('',(179.39441,-106.238661,1.585)); +#163061 = LINE('',#163062,#163063); +#163062 = CARTESIAN_POINT('',(179.364003,-106.208253,1.585)); +#163063 = VECTOR('',#163064,1.); +#163064 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#163065 = ORIENTED_EDGE('',*,*,#163066,.T.); +#163066 = EDGE_CURVE('',#163059,#163067,#163069,.T.); +#163067 = VERTEX_POINT('',#163068); +#163068 = CARTESIAN_POINT('',(179.686507,-106.238661,1.585)); +#163069 = CIRCLE('',#163070,0.252888498466); +#163070 = AXIS2_PLACEMENT_3D('',#163071,#163072,#163073); +#163071 = CARTESIAN_POINT('',(179.5404585,-106.032209,1.585)); +#163072 = DIRECTION('',(0.,0.,1.)); +#163073 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#163074 = ORIENTED_EDGE('',*,*,#163075,.T.); +#163075 = EDGE_CURVE('',#163067,#163076,#163078,.T.); +#163076 = VERTEX_POINT('',#163077); +#163077 = CARTESIAN_POINT('',(179.716914,-106.208253,1.585)); +#163078 = LINE('',#163079,#163080); +#163079 = CARTESIAN_POINT('',(179.686507,-106.238661,1.585)); +#163080 = VECTOR('',#163081,1.); +#163081 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#163082 = ORIENTED_EDGE('',*,*,#163083,.T.); +#163083 = EDGE_CURVE('',#163076,#163084,#163086,.T.); +#163084 = VERTEX_POINT('',#163085); +#163085 = CARTESIAN_POINT('',(179.716915,-105.868536,1.585)); +#163086 = CIRCLE('',#163087,0.305616146029); +#163087 = AXIS2_PLACEMENT_3D('',#163088,#163089,#163090); +#163088 = CARTESIAN_POINT('',(179.46284892049,-106.0383937521,1.585)); +#163089 = DIRECTION('',(0.,-0.,1.)); +#163090 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#163091 = ORIENTED_EDGE('',*,*,#163092,.T.); +#163092 = EDGE_CURVE('',#163084,#163031,#163093,.T.); +#163093 = LINE('',#163094,#163095); +#163094 = CARTESIAN_POINT('',(179.716915,-105.868536,1.585)); +#163095 = VECTOR('',#163096,1.); +#163096 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#163097 = PLANE('',#163098); +#163098 = AXIS2_PLACEMENT_3D('',#163099,#163100,#163101); +#163099 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163100 = DIRECTION('',(0.,0.,1.)); +#163101 = DIRECTION('',(1.,0.,-0.)); +#163102 = SHELL_BASED_SURFACE_MODEL('',(#163103)); +#163103 = OPEN_SHELL('',(#163104)); +#163104 = ADVANCED_FACE('',(#163105),#163149,.T.); +#163105 = FACE_BOUND('',#163106,.F.); +#163106 = EDGE_LOOP('',(#163107,#163118,#163126,#163135,#163143)); +#163107 = ORIENTED_EDGE('',*,*,#163108,.T.); +#163108 = EDGE_CURVE('',#163109,#163111,#163113,.T.); +#163109 = VERTEX_POINT('',#163110); +#163110 = CARTESIAN_POINT('',(91.938717,-105.410139,1.585)); +#163111 = VERTEX_POINT('',#163112); +#163112 = CARTESIAN_POINT('',(92.05415,-105.4331,1.585)); +#163113 = CIRCLE('',#163114,6.000007318648E-02); +#163114 = AXIS2_PLACEMENT_3D('',#163115,#163116,#163117); +#163115 = CARTESIAN_POINT('',(91.994149926814,-105.4330998233,1.585)); +#163116 = DIRECTION('',(0.,0.,-1.)); +#163117 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#163118 = ORIENTED_EDGE('',*,*,#163119,.T.); +#163119 = EDGE_CURVE('',#163111,#163120,#163122,.T.); +#163120 = VERTEX_POINT('',#163121); +#163121 = CARTESIAN_POINT('',(92.05415,-106.2131,1.585)); +#163122 = LINE('',#163123,#163124); +#163123 = CARTESIAN_POINT('',(92.05415,-105.4331,1.585)); +#163124 = VECTOR('',#163125,1.); +#163125 = DIRECTION('',(0.,-1.,0.)); +#163126 = ORIENTED_EDGE('',*,*,#163127,.T.); +#163127 = EDGE_CURVE('',#163120,#163128,#163130,.T.); +#163128 = VERTEX_POINT('',#163129); +#163129 = CARTESIAN_POINT('',(91.93415,-106.2131,1.585)); +#163130 = CIRCLE('',#163131,6.000000000043E-02); +#163131 = AXIS2_PLACEMENT_3D('',#163132,#163133,#163134); +#163132 = CARTESIAN_POINT('',(91.99415,-106.2131002255,1.585)); +#163133 = DIRECTION('',(0.,0.,-1.)); +#163134 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#163135 = ORIENTED_EDGE('',*,*,#163136,.T.); +#163136 = EDGE_CURVE('',#163128,#163137,#163139,.T.); +#163137 = VERTEX_POINT('',#163138); +#163138 = CARTESIAN_POINT('',(91.93415,-105.4331,1.585)); +#163139 = LINE('',#163140,#163141); +#163140 = CARTESIAN_POINT('',(91.93415,-106.2131,1.585)); +#163141 = VECTOR('',#163142,1.); +#163142 = DIRECTION('',(0.,1.,0.)); +#163143 = ORIENTED_EDGE('',*,*,#163144,.T.); +#163144 = EDGE_CURVE('',#163137,#163109,#163145,.T.); +#163145 = LINE('',#163146,#163147); +#163146 = CARTESIAN_POINT('',(91.93415,-105.4331,1.585)); +#163147 = VECTOR('',#163148,1.); +#163148 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#163149 = PLANE('',#163150); +#163150 = AXIS2_PLACEMENT_3D('',#163151,#163152,#163153); +#163151 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163152 = DIRECTION('',(0.,0.,1.)); +#163153 = DIRECTION('',(1.,0.,-0.)); +#163154 = SHELL_BASED_SURFACE_MODEL('',(#163155)); +#163155 = OPEN_SHELL('',(#163156)); +#163156 = ADVANCED_FACE('',(#163157),#163291,.T.); +#163157 = FACE_BOUND('',#163158,.F.); +#163158 = EDGE_LOOP('',(#163159,#163169,#163177,#163186,#163194,#163202, + #163211,#163219,#163228,#163236,#163244,#163252,#163260,#163269, + #163277,#163285)); +#163159 = ORIENTED_EDGE('',*,*,#163160,.T.); +#163160 = EDGE_CURVE('',#163161,#163163,#163165,.T.); +#163161 = VERTEX_POINT('',#163162); +#163162 = CARTESIAN_POINT('',(114.019514,-105.076941,1.585)); +#163163 = VERTEX_POINT('',#163164); +#163164 = CARTESIAN_POINT('',(114.05797,-105.05636,1.585)); +#163165 = LINE('',#163166,#163167); +#163166 = CARTESIAN_POINT('',(114.019514,-105.076941,1.585)); +#163167 = VECTOR('',#163168,1.); +#163168 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#163169 = ORIENTED_EDGE('',*,*,#163170,.T.); +#163170 = EDGE_CURVE('',#163163,#163171,#163173,.T.); +#163171 = VERTEX_POINT('',#163172); +#163172 = CARTESIAN_POINT('',(114.079807,-105.05636,1.585)); +#163173 = LINE('',#163174,#163175); +#163174 = CARTESIAN_POINT('',(114.05797,-105.05636,1.585)); +#163175 = VECTOR('',#163176,1.); +#163176 = DIRECTION('',(1.,0.,0.)); +#163177 = ORIENTED_EDGE('',*,*,#163178,.T.); +#163178 = EDGE_CURVE('',#163171,#163179,#163181,.T.); +#163179 = VERTEX_POINT('',#163180); +#163180 = CARTESIAN_POINT('',(114.147602,-105.129919,1.585)); +#163181 = CIRCLE('',#163182,7.216898094229E-02); +#163182 = AXIS2_PLACEMENT_3D('',#163183,#163184,#163185); +#163183 = CARTESIAN_POINT('',(114.07544906389,-105.1283972834,1.585)); +#163184 = DIRECTION('',(0.,0.,-1.)); +#163185 = DIRECTION('',(6.038516895284E-02,0.998175150648,0.)); +#163186 = ORIENTED_EDGE('',*,*,#163187,.T.); +#163187 = EDGE_CURVE('',#163179,#163188,#163190,.T.); +#163188 = VERTEX_POINT('',#163189); +#163189 = CARTESIAN_POINT('',(114.147602,-106.054919,1.585)); +#163190 = LINE('',#163191,#163192); +#163191 = CARTESIAN_POINT('',(114.147602,-105.129919,1.585)); +#163192 = VECTOR('',#163193,1.); +#163193 = DIRECTION('',(0.,-1.,0.)); +#163194 = ORIENTED_EDGE('',*,*,#163195,.T.); +#163195 = EDGE_CURVE('',#163188,#163196,#163198,.T.); +#163196 = VERTEX_POINT('',#163197); +#163197 = CARTESIAN_POINT('',(114.372948,-106.05636,1.585)); +#163198 = LINE('',#163199,#163200); +#163199 = CARTESIAN_POINT('',(114.147602,-106.054919,1.585)); +#163200 = VECTOR('',#163201,1.); +#163201 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#163202 = ORIENTED_EDGE('',*,*,#163203,.T.); +#163203 = EDGE_CURVE('',#163196,#163204,#163206,.T.); +#163204 = VERTEX_POINT('',#163205); +#163205 = CARTESIAN_POINT('',(114.358316,-106.204919,1.585)); +#163206 = CIRCLE('',#163207,7.500006711464E-02); +#163207 = AXIS2_PLACEMENT_3D('',#163208,#163209,#163210); +#163208 = CARTESIAN_POINT('',(114.35831606711,-106.1299189328,1.585)); +#163209 = DIRECTION('',(0.,0.,-1.)); +#163210 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#163211 = ORIENTED_EDGE('',*,*,#163212,.T.); +#163212 = EDGE_CURVE('',#163204,#163213,#163215,.T.); +#163213 = VERTEX_POINT('',#163214); +#163214 = CARTESIAN_POINT('',(113.772256,-106.203478,1.585)); +#163215 = LINE('',#163216,#163217); +#163216 = CARTESIAN_POINT('',(114.358316,-106.204919,1.585)); +#163217 = VECTOR('',#163218,1.); +#163218 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#163219 = ORIENTED_EDGE('',*,*,#163220,.T.); +#163220 = EDGE_CURVE('',#163213,#163221,#163223,.T.); +#163221 = VERTEX_POINT('',#163222); +#163222 = CARTESIAN_POINT('',(113.786888,-106.054919,1.585)); +#163223 = CIRCLE('',#163224,7.500006711464E-02); +#163224 = AXIS2_PLACEMENT_3D('',#163225,#163226,#163227); +#163225 = CARTESIAN_POINT('',(113.78688793288,-106.1299190671,1.585)); +#163226 = DIRECTION('',(0.,0.,-1.)); +#163227 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#163228 = ORIENTED_EDGE('',*,*,#163229,.T.); +#163229 = EDGE_CURVE('',#163221,#163230,#163232,.T.); +#163230 = VERTEX_POINT('',#163231); +#163231 = CARTESIAN_POINT('',(113.997602,-106.054919,1.585)); +#163232 = LINE('',#163233,#163234); +#163233 = CARTESIAN_POINT('',(113.786888,-106.054919,1.585)); +#163234 = VECTOR('',#163235,1.); +#163235 = DIRECTION('',(1.,0.,0.)); +#163236 = ORIENTED_EDGE('',*,*,#163237,.T.); +#163237 = EDGE_CURVE('',#163230,#163238,#163240,.T.); +#163238 = VERTEX_POINT('',#163239); +#163239 = CARTESIAN_POINT('',(113.997602,-105.358604,1.585)); +#163240 = LINE('',#163241,#163242); +#163241 = CARTESIAN_POINT('',(113.997602,-106.054919,1.585)); +#163242 = VECTOR('',#163243,1.); +#163243 = DIRECTION('',(0.,1.,0.)); +#163244 = ORIENTED_EDGE('',*,*,#163245,.T.); +#163245 = EDGE_CURVE('',#163238,#163246,#163248,.T.); +#163246 = VERTEX_POINT('',#163247); +#163247 = CARTESIAN_POINT('',(113.921966,-105.431131,1.585)); +#163248 = LINE('',#163249,#163250); +#163249 = CARTESIAN_POINT('',(113.997602,-105.358604,1.585)); +#163250 = VECTOR('',#163251,1.); +#163251 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#163252 = ORIENTED_EDGE('',*,*,#163253,.T.); +#163253 = EDGE_CURVE('',#163246,#163254,#163256,.T.); +#163254 = VERTEX_POINT('',#163255); +#163255 = CARTESIAN_POINT('',(113.806697,-105.48797,1.585)); +#163256 = LINE('',#163257,#163258); +#163257 = CARTESIAN_POINT('',(113.921966,-105.431131,1.585)); +#163258 = VECTOR('',#163259,1.); +#163259 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#163260 = ORIENTED_EDGE('',*,*,#163261,.T.); +#163261 = EDGE_CURVE('',#163254,#163262,#163264,.T.); +#163262 = VERTEX_POINT('',#163263); +#163263 = CARTESIAN_POINT('',(113.753347,-105.348551,1.585)); +#163264 = CIRCLE('',#163265,7.500005272361E-02); +#163265 = AXIS2_PLACEMENT_3D('',#163266,#163267,#163268); +#163266 = CARTESIAN_POINT('',(113.78688755676,-105.4156333297,1.585)); +#163267 = DIRECTION('',(0.,0.,-1.)); +#163268 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#163269 = ORIENTED_EDGE('',*,*,#163270,.T.); +#163270 = EDGE_CURVE('',#163262,#163271,#163273,.T.); +#163271 = VERTEX_POINT('',#163272); +#163272 = CARTESIAN_POINT('',(113.837699,-105.306375,1.585)); +#163273 = LINE('',#163274,#163275); +#163274 = CARTESIAN_POINT('',(113.753347,-105.348551,1.585)); +#163275 = VECTOR('',#163276,1.); +#163276 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#163277 = ORIENTED_EDGE('',*,*,#163278,.T.); +#163278 = EDGE_CURVE('',#163271,#163279,#163281,.T.); +#163279 = VERTEX_POINT('',#163280); +#163280 = CARTESIAN_POINT('',(113.919078,-105.224996,1.585)); +#163281 = LINE('',#163282,#163283); +#163282 = CARTESIAN_POINT('',(113.837699,-105.306375,1.585)); +#163283 = VECTOR('',#163284,1.); +#163284 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163285 = ORIENTED_EDGE('',*,*,#163286,.T.); +#163286 = EDGE_CURVE('',#163279,#163161,#163287,.T.); +#163287 = LINE('',#163288,#163289); +#163288 = CARTESIAN_POINT('',(113.919078,-105.224996,1.585)); +#163289 = VECTOR('',#163290,1.); +#163290 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#163291 = PLANE('',#163292); +#163292 = AXIS2_PLACEMENT_3D('',#163293,#163294,#163295); +#163293 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163294 = DIRECTION('',(0.,0.,1.)); +#163295 = DIRECTION('',(1.,0.,-0.)); +#163296 = SHELL_BASED_SURFACE_MODEL('',(#163297)); +#163297 = OPEN_SHELL('',(#163298)); +#163298 = ADVANCED_FACE('',(#163299),#163368,.T.); +#163299 = FACE_BOUND('',#163300,.F.); +#163300 = EDGE_LOOP('',(#163301,#163312,#163320,#163329,#163337,#163345, + #163354,#163362)); +#163301 = ORIENTED_EDGE('',*,*,#163302,.T.); +#163302 = EDGE_CURVE('',#163303,#163305,#163307,.T.); +#163303 = VERTEX_POINT('',#163304); +#163304 = CARTESIAN_POINT('',(111.915113,-105.203478,1.585)); +#163305 = VERTEX_POINT('',#163306); +#163306 = CARTESIAN_POINT('',(111.929745,-105.054919,1.585)); +#163307 = CIRCLE('',#163308,7.500006711464E-02); +#163308 = AXIS2_PLACEMENT_3D('',#163309,#163310,#163311); +#163309 = CARTESIAN_POINT('',(111.92974493288,-105.1299190671,1.585)); +#163310 = DIRECTION('',(0.,0.,-1.)); +#163311 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#163312 = ORIENTED_EDGE('',*,*,#163313,.T.); +#163313 = EDGE_CURVE('',#163305,#163314,#163316,.T.); +#163314 = VERTEX_POINT('',#163315); +#163315 = CARTESIAN_POINT('',(112.515805,-105.05636,1.585)); +#163316 = LINE('',#163317,#163318); +#163317 = CARTESIAN_POINT('',(111.929745,-105.054919,1.585)); +#163318 = VECTOR('',#163319,1.); +#163319 = DIRECTION('',(0.999996977183,-2.45878518261E-03,0.)); +#163320 = ORIENTED_EDGE('',*,*,#163321,.T.); +#163321 = EDGE_CURVE('',#163314,#163322,#163324,.T.); +#163322 = VERTEX_POINT('',#163323); +#163323 = CARTESIAN_POINT('',(112.501173,-105.204919,1.585)); +#163324 = CIRCLE('',#163325,7.500006711464E-02); +#163325 = AXIS2_PLACEMENT_3D('',#163326,#163327,#163328); +#163326 = CARTESIAN_POINT('',(112.50117306711,-105.1299189328,1.585)); +#163327 = DIRECTION('',(0.,0.,-1.)); +#163328 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#163329 = ORIENTED_EDGE('',*,*,#163330,.T.); +#163330 = EDGE_CURVE('',#163322,#163331,#163333,.T.); +#163331 = VERTEX_POINT('',#163332); +#163332 = CARTESIAN_POINT('',(112.290459,-105.204919,1.585)); +#163333 = LINE('',#163334,#163335); +#163334 = CARTESIAN_POINT('',(112.501173,-105.204919,1.585)); +#163335 = VECTOR('',#163336,1.); +#163336 = DIRECTION('',(-1.,0.,0.)); +#163337 = ORIENTED_EDGE('',*,*,#163338,.T.); +#163338 = EDGE_CURVE('',#163331,#163339,#163341,.T.); +#163339 = VERTEX_POINT('',#163340); +#163340 = CARTESIAN_POINT('',(112.289018,-106.144551,1.585)); +#163341 = LINE('',#163342,#163343); +#163342 = CARTESIAN_POINT('',(112.290459,-105.204919,1.585)); +#163343 = VECTOR('',#163344,1.); +#163344 = DIRECTION('',(-1.533577299926E-03,-0.99999882407,0.)); +#163345 = ORIENTED_EDGE('',*,*,#163346,.T.); +#163346 = EDGE_CURVE('',#163339,#163347,#163349,.T.); +#163347 = VERTEX_POINT('',#163348); +#163348 = CARTESIAN_POINT('',(112.140459,-106.129919,1.585)); +#163349 = CIRCLE('',#163350,7.500006711464E-02); +#163350 = AXIS2_PLACEMENT_3D('',#163351,#163352,#163353); +#163351 = CARTESIAN_POINT('',(112.21545906711,-106.1299190671,1.585)); +#163352 = DIRECTION('',(-0.,0.,-1.)); +#163353 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#163354 = ORIENTED_EDGE('',*,*,#163355,.T.); +#163355 = EDGE_CURVE('',#163347,#163356,#163358,.T.); +#163356 = VERTEX_POINT('',#163357); +#163357 = CARTESIAN_POINT('',(112.140459,-105.204919,1.585)); +#163358 = LINE('',#163359,#163360); +#163359 = CARTESIAN_POINT('',(112.140459,-106.129919,1.585)); +#163360 = VECTOR('',#163361,1.); +#163361 = DIRECTION('',(0.,1.,0.)); +#163362 = ORIENTED_EDGE('',*,*,#163363,.T.); +#163363 = EDGE_CURVE('',#163356,#163303,#163364,.T.); +#163364 = LINE('',#163365,#163366); +#163365 = CARTESIAN_POINT('',(112.140459,-105.204919,1.585)); +#163366 = VECTOR('',#163367,1.); +#163367 = DIRECTION('',(-0.999979555102,6.394480216655E-03,0.)); +#163368 = PLANE('',#163369); +#163369 = AXIS2_PLACEMENT_3D('',#163370,#163371,#163372); +#163370 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163371 = DIRECTION('',(0.,0.,1.)); +#163372 = DIRECTION('',(1.,0.,-0.)); +#163373 = SHELL_BASED_SURFACE_MODEL('',(#163374)); +#163374 = OPEN_SHELL('',(#163375)); +#163375 = ADVANCED_FACE('',(#163376,#163454),#163506,.T.); +#163376 = FACE_BOUND('',#163377,.F.); +#163377 = EDGE_LOOP('',(#163378,#163389,#163397,#163406,#163414,#163423, + #163431,#163439,#163448)); +#163378 = ORIENTED_EDGE('',*,*,#163379,.T.); +#163379 = EDGE_CURVE('',#163380,#163382,#163384,.T.); +#163380 = VERTEX_POINT('',#163381); +#163381 = CARTESIAN_POINT('',(112.760948,-105.115287,1.585)); +#163382 = VERTEX_POINT('',#163383); +#163383 = CARTESIAN_POINT('',(112.834507,-105.054919,1.585)); +#163384 = CIRCLE('',#163385,7.500074938986E-02); +#163385 = AXIS2_PLACEMENT_3D('',#163386,#163387,#163388); +#163386 = CARTESIAN_POINT('',(112.83450746611,-105.1299197493,1.585)); +#163387 = DIRECTION('',(0.,0.,-1.)); +#163388 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#163389 = ORIENTED_EDGE('',*,*,#163390,.T.); +#163390 = EDGE_CURVE('',#163382,#163391,#163393,.T.); +#163391 = VERTEX_POINT('',#163392); +#163392 = CARTESIAN_POINT('',(113.230091,-105.05636,1.585)); +#163393 = LINE('',#163394,#163395); +#163394 = CARTESIAN_POINT('',(112.834507,-105.054919,1.585)); +#163395 = VECTOR('',#163396,1.); +#163396 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#163397 = ORIENTED_EDGE('',*,*,#163398,.T.); +#163398 = EDGE_CURVE('',#163391,#163399,#163401,.T.); +#163399 = VERTEX_POINT('',#163400); +#163400 = CARTESIAN_POINT('',(113.479494,-105.305763,1.585)); +#163401 = CIRCLE('',#163402,0.347870264855); +#163402 = AXIS2_PLACEMENT_3D('',#163403,#163404,#163405); +#163403 = CARTESIAN_POINT('',(113.14276326502,-105.3930907349,1.585)); +#163404 = DIRECTION('',(0.,0.,-1.)); +#163405 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#163406 = ORIENTED_EDGE('',*,*,#163407,.T.); +#163407 = EDGE_CURVE('',#163399,#163408,#163410,.T.); +#163408 = VERTEX_POINT('',#163409); +#163409 = CARTESIAN_POINT('',(113.478272,-105.483062,1.585)); +#163410 = LINE('',#163411,#163412); +#163411 = CARTESIAN_POINT('',(113.479494,-105.305763,1.585)); +#163412 = VECTOR('',#163413,1.); +#163413 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#163414 = ORIENTED_EDGE('',*,*,#163415,.T.); +#163415 = EDGE_CURVE('',#163408,#163416,#163418,.T.); +#163416 = VERTEX_POINT('',#163417); +#163417 = CARTESIAN_POINT('',(113.230091,-105.727287,1.585)); +#163418 = CIRCLE('',#163419,0.348632345849); +#163419 = AXIS2_PLACEMENT_3D('',#163420,#163421,#163422); +#163420 = CARTESIAN_POINT('',(113.14232219403,-105.3898834593,1.585)); +#163421 = DIRECTION('',(0.,0.,-1.)); +#163422 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#163423 = ORIENTED_EDGE('',*,*,#163424,.T.); +#163424 = EDGE_CURVE('',#163416,#163425,#163427,.T.); +#163425 = VERTEX_POINT('',#163426); +#163426 = CARTESIAN_POINT('',(112.909507,-105.728728,1.585)); +#163427 = LINE('',#163428,#163429); +#163428 = CARTESIAN_POINT('',(113.230091,-105.727287,1.585)); +#163429 = VECTOR('',#163430,1.); +#163430 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#163431 = ORIENTED_EDGE('',*,*,#163432,.T.); +#163432 = EDGE_CURVE('',#163425,#163433,#163435,.T.); +#163433 = VERTEX_POINT('',#163434); +#163434 = CARTESIAN_POINT('',(112.908066,-106.144551,1.585)); +#163435 = LINE('',#163436,#163437); +#163436 = CARTESIAN_POINT('',(112.909507,-105.728728,1.585)); +#163437 = VECTOR('',#163438,1.); +#163438 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#163439 = ORIENTED_EDGE('',*,*,#163440,.T.); +#163440 = EDGE_CURVE('',#163433,#163441,#163443,.T.); +#163441 = VERTEX_POINT('',#163442); +#163442 = CARTESIAN_POINT('',(112.759507,-106.129919,1.585)); +#163443 = CIRCLE('',#163444,7.500006711464E-02); +#163444 = AXIS2_PLACEMENT_3D('',#163445,#163446,#163447); +#163445 = CARTESIAN_POINT('',(112.83450706711,-106.1299190671,1.585)); +#163446 = DIRECTION('',(-0.,0.,-1.)); +#163447 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#163448 = ORIENTED_EDGE('',*,*,#163449,.T.); +#163449 = EDGE_CURVE('',#163441,#163380,#163450,.T.); +#163450 = LINE('',#163451,#163452); +#163451 = CARTESIAN_POINT('',(112.759507,-106.129919,1.585)); +#163452 = VECTOR('',#163453,1.); +#163453 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#163454 = FACE_BOUND('',#163455,.F.); +#163455 = EDGE_LOOP('',(#163456,#163467,#163475,#163483,#163491,#163500) + ); +#163456 = ORIENTED_EDGE('',*,*,#163457,.T.); +#163457 = EDGE_CURVE('',#163458,#163460,#163462,.T.); +#163458 = VERTEX_POINT('',#163459); +#163459 = CARTESIAN_POINT('',(113.330935,-105.3381,1.585)); +#163460 = VERTEX_POINT('',#163461); +#163461 = CARTESIAN_POINT('',(113.197754,-105.204919,1.585)); +#163462 = CIRCLE('',#163463,0.18686440374); +#163463 = AXIS2_PLACEMENT_3D('',#163464,#163465,#163466); +#163464 = CARTESIAN_POINT('',(113.150218,-105.385636,1.585)); +#163465 = DIRECTION('',(0.,0.,1.)); +#163466 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#163467 = ORIENTED_EDGE('',*,*,#163468,.T.); +#163468 = EDGE_CURVE('',#163460,#163469,#163471,.T.); +#163469 = VERTEX_POINT('',#163470); +#163470 = CARTESIAN_POINT('',(112.909507,-105.204919,1.585)); +#163471 = LINE('',#163472,#163473); +#163472 = CARTESIAN_POINT('',(113.197754,-105.204919,1.585)); +#163473 = VECTOR('',#163474,1.); +#163474 = DIRECTION('',(-1.,0.,0.)); +#163475 = ORIENTED_EDGE('',*,*,#163476,.T.); +#163476 = EDGE_CURVE('',#163469,#163477,#163479,.T.); +#163477 = VERTEX_POINT('',#163478); +#163478 = CARTESIAN_POINT('',(112.909507,-105.578728,1.585)); +#163479 = LINE('',#163480,#163481); +#163480 = CARTESIAN_POINT('',(112.909507,-105.204919,1.585)); +#163481 = VECTOR('',#163482,1.); +#163482 = DIRECTION('',(0.,-1.,0.)); +#163483 = ORIENTED_EDGE('',*,*,#163484,.T.); +#163484 = EDGE_CURVE('',#163477,#163485,#163487,.T.); +#163485 = VERTEX_POINT('',#163486); +#163486 = CARTESIAN_POINT('',(113.197754,-105.578728,1.585)); +#163487 = LINE('',#163488,#163489); +#163488 = CARTESIAN_POINT('',(112.909507,-105.578728,1.585)); +#163489 = VECTOR('',#163490,1.); +#163490 = DIRECTION('',(1.,0.,0.)); +#163491 = ORIENTED_EDGE('',*,*,#163492,.T.); +#163492 = EDGE_CURVE('',#163485,#163493,#163495,.T.); +#163493 = VERTEX_POINT('',#163494); +#163494 = CARTESIAN_POINT('',(113.330935,-105.445547,1.585)); +#163495 = CIRCLE('',#163496,0.18686440374); +#163496 = AXIS2_PLACEMENT_3D('',#163497,#163498,#163499); +#163497 = CARTESIAN_POINT('',(113.150218,-105.398011,1.585)); +#163498 = DIRECTION('',(0.,0.,1.)); +#163499 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#163500 = ORIENTED_EDGE('',*,*,#163501,.T.); +#163501 = EDGE_CURVE('',#163493,#163458,#163502,.T.); +#163502 = LINE('',#163503,#163504); +#163503 = CARTESIAN_POINT('',(113.330935,-105.445547,1.585)); +#163504 = VECTOR('',#163505,1.); +#163505 = DIRECTION('',(0.,1.,0.)); +#163506 = PLANE('',#163507); +#163507 = AXIS2_PLACEMENT_3D('',#163508,#163509,#163510); +#163508 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163509 = DIRECTION('',(0.,0.,1.)); +#163510 = DIRECTION('',(1.,0.,-0.)); +#163511 = SHELL_BASED_SURFACE_MODEL('',(#163512)); +#163512 = OPEN_SHELL('',(#163513)); +#163513 = ADVANCED_FACE('',(#163514),#163574,.T.); +#163514 = FACE_BOUND('',#163515,.F.); +#163515 = EDGE_LOOP('',(#163516,#163527,#163535,#163543,#163551,#163559, + #163568)); +#163516 = ORIENTED_EDGE('',*,*,#163517,.T.); +#163517 = EDGE_CURVE('',#163518,#163520,#163522,.T.); +#163518 = VERTEX_POINT('',#163519); +#163519 = CARTESIAN_POINT('',(91.21415,-105.8331,1.585)); +#163520 = VERTEX_POINT('',#163521); +#163521 = CARTESIAN_POINT('',(91.165626,-105.73781,1.585)); +#163522 = CIRCLE('',#163523,6.000027696174E-02); +#163523 = AXIS2_PLACEMENT_3D('',#163524,#163525,#163526); +#163524 = CARTESIAN_POINT('',(91.214150928468,-105.773099723,1.585)); +#163525 = DIRECTION('',(0.,0.,-1.)); +#163526 = DIRECTION('',(-1.547440135436E-05,-0.99999999988,-0.)); +#163527 = ORIENTED_EDGE('',*,*,#163528,.T.); +#163528 = EDGE_CURVE('',#163520,#163529,#163531,.T.); +#163529 = VERTEX_POINT('',#163530); +#163530 = CARTESIAN_POINT('',(91.405626,-105.40781,1.585)); +#163531 = LINE('',#163532,#163533); +#163532 = CARTESIAN_POINT('',(91.165626,-105.73781,1.585)); +#163533 = VECTOR('',#163534,1.); +#163534 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#163535 = ORIENTED_EDGE('',*,*,#163536,.T.); +#163536 = EDGE_CURVE('',#163529,#163537,#163539,.T.); +#163537 = VERTEX_POINT('',#163538); +#163538 = CARTESIAN_POINT('',(91.444792,-105.383834,1.585)); +#163539 = LINE('',#163540,#163541); +#163540 = CARTESIAN_POINT('',(91.405626,-105.40781,1.585)); +#163541 = VECTOR('',#163542,1.); +#163542 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#163543 = ORIENTED_EDGE('',*,*,#163544,.T.); +#163544 = EDGE_CURVE('',#163537,#163545,#163547,.T.); +#163545 = VERTEX_POINT('',#163546); +#163546 = CARTESIAN_POINT('',(91.48944,-105.394576,1.585)); +#163547 = LINE('',#163548,#163549); +#163548 = CARTESIAN_POINT('',(91.444792,-105.383834,1.585)); +#163549 = VECTOR('',#163550,1.); +#163550 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#163551 = ORIENTED_EDGE('',*,*,#163552,.T.); +#163552 = EDGE_CURVE('',#163545,#163553,#163555,.T.); +#163553 = VERTEX_POINT('',#163554); +#163554 = CARTESIAN_POINT('',(91.742674,-105.73781,1.585)); +#163555 = LINE('',#163556,#163557); +#163556 = CARTESIAN_POINT('',(91.48944,-105.394576,1.585)); +#163557 = VECTOR('',#163558,1.); +#163558 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#163559 = ORIENTED_EDGE('',*,*,#163560,.T.); +#163560 = EDGE_CURVE('',#163553,#163561,#163563,.T.); +#163561 = VERTEX_POINT('',#163562); +#163562 = CARTESIAN_POINT('',(91.69415,-105.8331,1.585)); +#163563 = CIRCLE('',#163564,5.999941814204E-02); +#163564 = AXIS2_PLACEMENT_3D('',#163565,#163566,#163567); +#163565 = CARTESIAN_POINT('',(91.694150758052,-105.7731005818,1.585)); +#163566 = DIRECTION('',(0.,0.,-1.)); +#163567 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#163568 = ORIENTED_EDGE('',*,*,#163569,.T.); +#163569 = EDGE_CURVE('',#163561,#163518,#163570,.T.); +#163570 = LINE('',#163571,#163572); +#163571 = CARTESIAN_POINT('',(91.69415,-105.8331,1.585)); +#163572 = VECTOR('',#163573,1.); +#163573 = DIRECTION('',(-1.,0.,0.)); +#163574 = PLANE('',#163575); +#163575 = AXIS2_PLACEMENT_3D('',#163576,#163577,#163578); +#163576 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163577 = DIRECTION('',(0.,0.,1.)); +#163578 = DIRECTION('',(1.,0.,-0.)); +#163579 = SHELL_BASED_SURFACE_MODEL('',(#163580)); +#163580 = OPEN_SHELL('',(#163581)); +#163581 = ADVANCED_FACE('',(#163582),#163618,.T.); +#163582 = FACE_BOUND('',#163583,.F.); +#163583 = EDGE_LOOP('',(#163584,#163595,#163603,#163612)); +#163584 = ORIENTED_EDGE('',*,*,#163585,.T.); +#163585 = EDGE_CURVE('',#163586,#163588,#163590,.T.); +#163586 = VERTEX_POINT('',#163587); +#163587 = CARTESIAN_POINT('',(119.955398,-105.7431,1.585)); +#163588 = VERTEX_POINT('',#163589); +#163589 = CARTESIAN_POINT('',(119.955398,-105.6231,1.585)); +#163590 = CIRCLE('',#163591,6.000000000043E-02); +#163591 = AXIS2_PLACEMENT_3D('',#163592,#163593,#163594); +#163592 = CARTESIAN_POINT('',(119.95539777441,-105.6831,1.585)); +#163593 = DIRECTION('',(0.,0.,-1.)); +#163594 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#163595 = ORIENTED_EDGE('',*,*,#163596,.T.); +#163596 = EDGE_CURVE('',#163588,#163597,#163599,.T.); +#163597 = VERTEX_POINT('',#163598); +#163598 = CARTESIAN_POINT('',(121.377902,-105.6231,1.585)); +#163599 = LINE('',#163600,#163601); +#163600 = CARTESIAN_POINT('',(119.955398,-105.6231,1.585)); +#163601 = VECTOR('',#163602,1.); +#163602 = DIRECTION('',(1.,0.,0.)); +#163603 = ORIENTED_EDGE('',*,*,#163604,.T.); +#163604 = EDGE_CURVE('',#163597,#163605,#163607,.T.); +#163605 = VERTEX_POINT('',#163606); +#163606 = CARTESIAN_POINT('',(121.377902,-105.7431,1.585)); +#163607 = CIRCLE('',#163608,6.000000000042E-02); +#163608 = AXIS2_PLACEMENT_3D('',#163609,#163610,#163611); +#163609 = CARTESIAN_POINT('',(121.37790222558,-105.6831,1.585)); +#163610 = DIRECTION('',(0.,0.,-1.)); +#163611 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#163612 = ORIENTED_EDGE('',*,*,#163613,.T.); +#163613 = EDGE_CURVE('',#163605,#163586,#163614,.T.); +#163614 = LINE('',#163615,#163616); +#163615 = CARTESIAN_POINT('',(121.377902,-105.7431,1.585)); +#163616 = VECTOR('',#163617,1.); +#163617 = DIRECTION('',(-1.,0.,0.)); +#163618 = PLANE('',#163619); +#163619 = AXIS2_PLACEMENT_3D('',#163620,#163621,#163622); +#163620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163621 = DIRECTION('',(0.,0.,1.)); +#163622 = DIRECTION('',(1.,0.,-0.)); +#163623 = SHELL_BASED_SURFACE_MODEL('',(#163624)); +#163624 = OPEN_SHELL('',(#163625)); +#163625 = ADVANCED_FACE('',(#163626),#163662,.T.); +#163626 = FACE_BOUND('',#163627,.F.); +#163627 = EDGE_LOOP('',(#163628,#163639,#163647,#163656)); +#163628 = ORIENTED_EDGE('',*,*,#163629,.T.); +#163629 = EDGE_CURVE('',#163630,#163632,#163634,.T.); +#163630 = VERTEX_POINT('',#163631); +#163631 = CARTESIAN_POINT('',(125.455398,-105.7431,1.585)); +#163632 = VERTEX_POINT('',#163633); +#163633 = CARTESIAN_POINT('',(125.455398,-105.6231,1.585)); +#163634 = CIRCLE('',#163635,6.000000000043E-02); +#163635 = AXIS2_PLACEMENT_3D('',#163636,#163637,#163638); +#163636 = CARTESIAN_POINT('',(125.45539777441,-105.6831,1.585)); +#163637 = DIRECTION('',(0.,0.,-1.)); +#163638 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#163639 = ORIENTED_EDGE('',*,*,#163640,.T.); +#163640 = EDGE_CURVE('',#163632,#163641,#163643,.T.); +#163641 = VERTEX_POINT('',#163642); +#163642 = CARTESIAN_POINT('',(126.877902,-105.6231,1.585)); +#163643 = LINE('',#163644,#163645); +#163644 = CARTESIAN_POINT('',(125.455398,-105.6231,1.585)); +#163645 = VECTOR('',#163646,1.); +#163646 = DIRECTION('',(1.,0.,0.)); +#163647 = ORIENTED_EDGE('',*,*,#163648,.T.); +#163648 = EDGE_CURVE('',#163641,#163649,#163651,.T.); +#163649 = VERTEX_POINT('',#163650); +#163650 = CARTESIAN_POINT('',(126.877902,-105.7431,1.585)); +#163651 = CIRCLE('',#163652,6.000000000042E-02); +#163652 = AXIS2_PLACEMENT_3D('',#163653,#163654,#163655); +#163653 = CARTESIAN_POINT('',(126.87790222558,-105.6831,1.585)); +#163654 = DIRECTION('',(0.,0.,-1.)); +#163655 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#163656 = ORIENTED_EDGE('',*,*,#163657,.T.); +#163657 = EDGE_CURVE('',#163649,#163630,#163658,.T.); +#163658 = LINE('',#163659,#163660); +#163659 = CARTESIAN_POINT('',(126.877902,-105.7431,1.585)); +#163660 = VECTOR('',#163661,1.); +#163661 = DIRECTION('',(-1.,0.,0.)); +#163662 = PLANE('',#163663); +#163663 = AXIS2_PLACEMENT_3D('',#163664,#163665,#163666); +#163664 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163665 = DIRECTION('',(0.,0.,1.)); +#163666 = DIRECTION('',(1.,0.,-0.)); +#163667 = SHELL_BASED_SURFACE_MODEL('',(#163668)); +#163668 = OPEN_SHELL('',(#163669)); +#163669 = ADVANCED_FACE('',(#163670),#163813,.T.); +#163670 = FACE_BOUND('',#163671,.F.); +#163671 = EDGE_LOOP('',(#163672,#163683,#163691,#163699,#163708,#163716, + #163724,#163733,#163741,#163750,#163758,#163766,#163774,#163783, + #163791,#163799,#163807)); +#163672 = ORIENTED_EDGE('',*,*,#163673,.T.); +#163673 = EDGE_CURVE('',#163674,#163676,#163678,.T.); +#163674 = VERTEX_POINT('',#163675); +#163675 = CARTESIAN_POINT('',(206.721467,-104.927406,1.585)); +#163676 = VERTEX_POINT('',#163677); +#163677 = CARTESIAN_POINT('',(206.838135,-104.989766,1.585)); +#163678 = CIRCLE('',#163679,7.500000000003E-02); +#163679 = AXIS2_PLACEMENT_3D('',#163680,#163681,#163682); +#163680 = CARTESIAN_POINT('',(206.763135,-104.9897660655,1.585)); +#163681 = DIRECTION('',(0.,0.,-1.)); +#163682 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#163683 = ORIENTED_EDGE('',*,*,#163684,.T.); +#163684 = EDGE_CURVE('',#163676,#163685,#163687,.T.); +#163685 = VERTEX_POINT('',#163686); +#163686 = CARTESIAN_POINT('',(206.838135,-105.057623,1.585)); +#163687 = LINE('',#163688,#163689); +#163688 = CARTESIAN_POINT('',(206.838135,-104.989766,1.585)); +#163689 = VECTOR('',#163690,1.); +#163690 = DIRECTION('',(0.,-1.,0.)); +#163691 = ORIENTED_EDGE('',*,*,#163692,.T.); +#163692 = EDGE_CURVE('',#163685,#163693,#163695,.T.); +#163693 = VERTEX_POINT('',#163694); +#163694 = CARTESIAN_POINT('',(207.111101,-105.059064,1.585)); +#163695 = LINE('',#163696,#163697); +#163696 = CARTESIAN_POINT('',(206.838135,-105.057623,1.585)); +#163697 = VECTOR('',#163698,1.); +#163698 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#163699 = ORIENTED_EDGE('',*,*,#163700,.T.); +#163700 = EDGE_CURVE('',#163693,#163701,#163703,.T.); +#163701 = VERTEX_POINT('',#163702); +#163702 = CARTESIAN_POINT('',(207.096469,-105.207623,1.585)); +#163703 = CIRCLE('',#163704,7.500006711463E-02); +#163704 = AXIS2_PLACEMENT_3D('',#163705,#163706,#163707); +#163705 = CARTESIAN_POINT('',(207.09646906711,-105.1326229328,1.585)); +#163706 = DIRECTION('',(0.,0.,-1.)); +#163707 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#163708 = ORIENTED_EDGE('',*,*,#163709,.T.); +#163709 = EDGE_CURVE('',#163701,#163710,#163712,.T.); +#163710 = VERTEX_POINT('',#163711); +#163711 = CARTESIAN_POINT('',(206.838135,-105.207623,1.585)); +#163712 = LINE('',#163713,#163714); +#163713 = CARTESIAN_POINT('',(207.096469,-105.207623,1.585)); +#163714 = VECTOR('',#163715,1.); +#163715 = DIRECTION('',(-1.,0.,0.)); +#163716 = ORIENTED_EDGE('',*,*,#163717,.T.); +#163717 = EDGE_CURVE('',#163710,#163718,#163720,.T.); +#163718 = VERTEX_POINT('',#163719); +#163719 = CARTESIAN_POINT('',(206.836694,-105.623445,1.585)); +#163720 = LINE('',#163721,#163722); +#163721 = CARTESIAN_POINT('',(206.838135,-105.207623,1.585)); +#163722 = VECTOR('',#163723,1.); +#163723 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#163724 = ORIENTED_EDGE('',*,*,#163725,.T.); +#163725 = EDGE_CURVE('',#163718,#163726,#163728,.T.); +#163726 = VERTEX_POINT('',#163727); +#163727 = CARTESIAN_POINT('',(206.739417,-105.679964,1.585)); +#163728 = CIRCLE('',#163729,7.500041328201E-02); +#163729 = AXIS2_PLACEMENT_3D('',#163730,#163731,#163732); +#163730 = CARTESIAN_POINT('',(206.76313481481,-105.6088125611,1.585)); +#163731 = DIRECTION('',(0.,0.,-1.)); +#163732 = DIRECTION('',(0.980783731279,-0.195098109828,0.)); +#163733 = ORIENTED_EDGE('',*,*,#163734,.T.); +#163734 = EDGE_CURVE('',#163726,#163735,#163737,.T.); +#163735 = VERTEX_POINT('',#163736); +#163736 = CARTESIAN_POINT('',(206.011707,-105.435875,1.585)); +#163737 = LINE('',#163738,#163739); +#163738 = CARTESIAN_POINT('',(206.739417,-105.679964,1.585)); +#163739 = VECTOR('',#163740,1.); +#163740 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#163741 = ORIENTED_EDGE('',*,*,#163742,.T.); +#163742 = EDGE_CURVE('',#163735,#163743,#163745,.T.); +#163743 = VERTEX_POINT('',#163744); +#163744 = CARTESIAN_POINT('',(206.072567,-105.299567,1.585)); +#163745 = CIRCLE('',#163746,7.50000151955E-02); +#163746 = AXIS2_PLACEMENT_3D('',#163747,#163748,#163749); +#163747 = CARTESIAN_POINT('',(206.04885009996,-105.3707183241,1.585)); +#163748 = DIRECTION('',(0.,0.,-1.)); +#163749 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#163750 = ORIENTED_EDGE('',*,*,#163751,.T.); +#163751 = EDGE_CURVE('',#163743,#163752,#163754,.T.); +#163752 = VERTEX_POINT('',#163753); +#163753 = CARTESIAN_POINT('',(206.688135,-105.504756,1.585)); +#163754 = LINE('',#163755,#163756); +#163755 = CARTESIAN_POINT('',(206.072567,-105.299567,1.585)); +#163756 = VECTOR('',#163757,1.); +#163757 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#163758 = ORIENTED_EDGE('',*,*,#163759,.T.); +#163759 = EDGE_CURVE('',#163752,#163760,#163762,.T.); +#163760 = VERTEX_POINT('',#163761); +#163761 = CARTESIAN_POINT('',(206.688135,-105.207623,1.585)); +#163762 = LINE('',#163763,#163764); +#163763 = CARTESIAN_POINT('',(206.688135,-105.504756,1.585)); +#163764 = VECTOR('',#163765,1.); +#163765 = DIRECTION('',(0.,1.,0.)); +#163766 = ORIENTED_EDGE('',*,*,#163767,.T.); +#163767 = EDGE_CURVE('',#163760,#163768,#163770,.T.); +#163768 = VERTEX_POINT('',#163769); +#163769 = CARTESIAN_POINT('',(206.41517,-105.206182,1.585)); +#163770 = LINE('',#163771,#163772); +#163771 = CARTESIAN_POINT('',(206.688135,-105.207623,1.585)); +#163772 = VECTOR('',#163773,1.); +#163773 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#163774 = ORIENTED_EDGE('',*,*,#163775,.T.); +#163775 = EDGE_CURVE('',#163768,#163776,#163778,.T.); +#163776 = VERTEX_POINT('',#163777); +#163777 = CARTESIAN_POINT('',(206.429802,-105.057623,1.585)); +#163778 = CIRCLE('',#163779,7.500006711464E-02); +#163779 = AXIS2_PLACEMENT_3D('',#163780,#163781,#163782); +#163780 = CARTESIAN_POINT('',(206.42980193288,-105.1326230671,1.585)); +#163781 = DIRECTION('',(0.,0.,-1.)); +#163782 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#163783 = ORIENTED_EDGE('',*,*,#163784,.T.); +#163784 = EDGE_CURVE('',#163776,#163785,#163787,.T.); +#163785 = VERTEX_POINT('',#163786); +#163786 = CARTESIAN_POINT('',(206.688135,-105.057623,1.585)); +#163787 = LINE('',#163788,#163789); +#163788 = CARTESIAN_POINT('',(206.429802,-105.057623,1.585)); +#163789 = VECTOR('',#163790,1.); +#163790 = DIRECTION('',(1.,0.,0.)); +#163791 = ORIENTED_EDGE('',*,*,#163792,.T.); +#163792 = EDGE_CURVE('',#163785,#163793,#163795,.T.); +#163793 = VERTEX_POINT('',#163794); +#163794 = CARTESIAN_POINT('',(206.689576,-104.975134,1.585)); +#163795 = LINE('',#163796,#163797); +#163796 = CARTESIAN_POINT('',(206.688135,-105.057623,1.585)); +#163797 = VECTOR('',#163798,1.); +#163798 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#163799 = ORIENTED_EDGE('',*,*,#163800,.T.); +#163800 = EDGE_CURVE('',#163793,#163801,#163803,.T.); +#163801 = VERTEX_POINT('',#163802); +#163802 = CARTESIAN_POINT('',(206.700775,-104.948098,1.585)); +#163803 = LINE('',#163804,#163805); +#163804 = CARTESIAN_POINT('',(206.689576,-104.975134,1.585)); +#163805 = VECTOR('',#163806,1.); +#163806 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#163807 = ORIENTED_EDGE('',*,*,#163808,.T.); +#163808 = EDGE_CURVE('',#163801,#163674,#163809,.T.); +#163809 = LINE('',#163810,#163811); +#163810 = CARTESIAN_POINT('',(206.700775,-104.948098,1.585)); +#163811 = VECTOR('',#163812,1.); +#163812 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163813 = PLANE('',#163814); +#163814 = AXIS2_PLACEMENT_3D('',#163815,#163816,#163817); +#163815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163816 = DIRECTION('',(0.,0.,1.)); +#163817 = DIRECTION('',(1.,0.,-0.)); +#163818 = SHELL_BASED_SURFACE_MODEL('',(#163819)); +#163819 = OPEN_SHELL('',(#163820)); +#163820 = ADVANCED_FACE('',(#163821),#163948,.T.); +#163821 = FACE_BOUND('',#163822,.F.); +#163822 = EDGE_LOOP('',(#163823,#163834,#163842,#163851,#163859,#163868, + #163876,#163884,#163892,#163900,#163908,#163916,#163925,#163933, + #163942)); +#163823 = ORIENTED_EDGE('',*,*,#163824,.T.); +#163824 = EDGE_CURVE('',#163825,#163827,#163829,.T.); +#163825 = VERTEX_POINT('',#163826); +#163826 = CARTESIAN_POINT('',(184.92165,-102.1731,1.585)); +#163827 = VERTEX_POINT('',#163828); +#163828 = CARTESIAN_POINT('',(184.98165,-102.1131,1.585)); +#163829 = CIRCLE('',#163830,5.999932016262E-02); +#163830 = AXIS2_PLACEMENT_3D('',#163831,#163832,#163833); +#163831 = CARTESIAN_POINT('',(184.98164932015,-102.1730993201,1.585)); +#163832 = DIRECTION('',(0.,0.,-1.)); +#163833 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#163834 = ORIENTED_EDGE('',*,*,#163835,.T.); +#163835 = EDGE_CURVE('',#163827,#163836,#163838,.T.); +#163836 = VERTEX_POINT('',#163837); +#163837 = CARTESIAN_POINT('',(190.49165,-102.1131,1.585)); +#163838 = LINE('',#163839,#163840); +#163839 = CARTESIAN_POINT('',(184.98165,-102.1131,1.585)); +#163840 = VECTOR('',#163841,1.); +#163841 = DIRECTION('',(1.,0.,0.)); +#163842 = ORIENTED_EDGE('',*,*,#163843,.T.); +#163843 = EDGE_CURVE('',#163836,#163844,#163846,.T.); +#163844 = VERTEX_POINT('',#163845); +#163845 = CARTESIAN_POINT('',(190.49165,-102.2331,1.585)); +#163846 = CIRCLE('',#163847,6.000000000042E-02); +#163847 = AXIS2_PLACEMENT_3D('',#163848,#163849,#163850); +#163848 = CARTESIAN_POINT('',(190.49165022558,-102.1731,1.585)); +#163849 = DIRECTION('',(0.,0.,-1.)); +#163850 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#163851 = ORIENTED_EDGE('',*,*,#163852,.T.); +#163852 = EDGE_CURVE('',#163844,#163853,#163855,.T.); +#163853 = VERTEX_POINT('',#163854); +#163854 = CARTESIAN_POINT('',(188.787806,-102.2331,1.585)); +#163855 = LINE('',#163856,#163857); +#163856 = CARTESIAN_POINT('',(190.49165,-102.2331,1.585)); +#163857 = VECTOR('',#163858,1.); +#163858 = DIRECTION('',(-1.,0.,0.)); +#163859 = ORIENTED_EDGE('',*,*,#163860,.T.); +#163860 = EDGE_CURVE('',#163853,#163861,#163863,.T.); +#163861 = VERTEX_POINT('',#163862); +#163862 = CARTESIAN_POINT('',(188.66975,-102.1731,1.585)); +#163863 = CIRCLE('',#163864,0.140464469153); +#163864 = AXIS2_PLACEMENT_3D('',#163865,#163866,#163867); +#163865 = CARTESIAN_POINT('',(188.67265150144,-102.3135344985,1.585)); +#163866 = DIRECTION('',(0.,0.,1.)); +#163867 = DIRECTION('',(0.819812293082,0.572632346372,-0.)); +#163868 = ORIENTED_EDGE('',*,*,#163869,.T.); +#163869 = EDGE_CURVE('',#163861,#163870,#163872,.T.); +#163870 = VERTEX_POINT('',#163871); +#163871 = CARTESIAN_POINT('',(188.640486,-102.175982,1.585)); +#163872 = LINE('',#163873,#163874); +#163873 = CARTESIAN_POINT('',(188.66975,-102.1731,1.585)); +#163874 = VECTOR('',#163875,1.); +#163875 = DIRECTION('',(-0.995185563998,-9.800863844463E-02,0.)); +#163876 = ORIENTED_EDGE('',*,*,#163877,.T.); +#163877 = EDGE_CURVE('',#163870,#163878,#163880,.T.); +#163878 = VERTEX_POINT('',#163879); +#163879 = CARTESIAN_POINT('',(188.586414,-102.19838,1.585)); +#163880 = LINE('',#163881,#163882); +#163881 = CARTESIAN_POINT('',(188.640486,-102.175982,1.585)); +#163882 = VECTOR('',#163883,1.); +#163883 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#163884 = ORIENTED_EDGE('',*,*,#163885,.T.); +#163885 = EDGE_CURVE('',#163878,#163886,#163888,.T.); +#163886 = VERTEX_POINT('',#163887); +#163887 = CARTESIAN_POINT('',(188.551694,-102.2331,1.585)); +#163888 = LINE('',#163889,#163890); +#163889 = CARTESIAN_POINT('',(188.586414,-102.19838,1.585)); +#163890 = VECTOR('',#163891,1.); +#163891 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#163892 = ORIENTED_EDGE('',*,*,#163893,.T.); +#163893 = EDGE_CURVE('',#163886,#163894,#163896,.T.); +#163894 = VERTEX_POINT('',#163895); +#163895 = CARTESIAN_POINT('',(185.04165,-102.2331,1.585)); +#163896 = LINE('',#163897,#163898); +#163897 = CARTESIAN_POINT('',(188.551694,-102.2331,1.585)); +#163898 = VECTOR('',#163899,1.); +#163899 = DIRECTION('',(-1.,0.,0.)); +#163900 = ORIENTED_EDGE('',*,*,#163901,.T.); +#163901 = EDGE_CURVE('',#163894,#163902,#163904,.T.); +#163902 = VERTEX_POINT('',#163903); +#163903 = CARTESIAN_POINT('',(185.04165,-105.4131,1.585)); +#163904 = LINE('',#163905,#163906); +#163905 = CARTESIAN_POINT('',(185.04165,-102.2331,1.585)); +#163906 = VECTOR('',#163907,1.); +#163907 = DIRECTION('',(0.,-1.,0.)); +#163908 = ORIENTED_EDGE('',*,*,#163909,.T.); +#163909 = EDGE_CURVE('',#163902,#163910,#163912,.T.); +#163910 = VERTEX_POINT('',#163911); +#163911 = CARTESIAN_POINT('',(190.49165,-105.4131,1.585)); +#163912 = LINE('',#163913,#163914); +#163913 = CARTESIAN_POINT('',(185.04165,-105.4131,1.585)); +#163914 = VECTOR('',#163915,1.); +#163915 = DIRECTION('',(1.,0.,0.)); +#163916 = ORIENTED_EDGE('',*,*,#163917,.T.); +#163917 = EDGE_CURVE('',#163910,#163918,#163920,.T.); +#163918 = VERTEX_POINT('',#163919); +#163919 = CARTESIAN_POINT('',(190.49165,-105.5331,1.585)); +#163920 = CIRCLE('',#163921,6.000000000042E-02); +#163921 = AXIS2_PLACEMENT_3D('',#163922,#163923,#163924); +#163922 = CARTESIAN_POINT('',(190.49165022558,-105.4731,1.585)); +#163923 = DIRECTION('',(0.,0.,-1.)); +#163924 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#163925 = ORIENTED_EDGE('',*,*,#163926,.T.); +#163926 = EDGE_CURVE('',#163918,#163927,#163929,.T.); +#163927 = VERTEX_POINT('',#163928); +#163928 = CARTESIAN_POINT('',(184.98165,-105.5331,1.585)); +#163929 = LINE('',#163930,#163931); +#163930 = CARTESIAN_POINT('',(190.49165,-105.5331,1.585)); +#163931 = VECTOR('',#163932,1.); +#163932 = DIRECTION('',(-1.,0.,0.)); +#163933 = ORIENTED_EDGE('',*,*,#163934,.T.); +#163934 = EDGE_CURVE('',#163927,#163935,#163937,.T.); +#163935 = VERTEX_POINT('',#163936); +#163936 = CARTESIAN_POINT('',(184.92165,-105.4731,1.585)); +#163937 = CIRCLE('',#163938,5.999932016262E-02); +#163938 = AXIS2_PLACEMENT_3D('',#163939,#163940,#163941); +#163939 = CARTESIAN_POINT('',(184.98164932015,-105.4731006798,1.585)); +#163940 = DIRECTION('',(0.,0.,-1.)); +#163941 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#163942 = ORIENTED_EDGE('',*,*,#163943,.T.); +#163943 = EDGE_CURVE('',#163935,#163825,#163944,.T.); +#163944 = LINE('',#163945,#163946); +#163945 = CARTESIAN_POINT('',(184.92165,-105.4731,1.585)); +#163946 = VECTOR('',#163947,1.); +#163947 = DIRECTION('',(0.,1.,0.)); +#163948 = PLANE('',#163949); +#163949 = AXIS2_PLACEMENT_3D('',#163950,#163951,#163952); +#163950 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163951 = DIRECTION('',(0.,0.,1.)); +#163952 = DIRECTION('',(1.,0.,-0.)); +#163953 = SHELL_BASED_SURFACE_MODEL('',(#163954)); +#163954 = OPEN_SHELL('',(#163955)); +#163955 = ADVANCED_FACE('',(#163956),#164042,.T.); +#163956 = FACE_BOUND('',#163957,.F.); +#163957 = EDGE_LOOP('',(#163958,#163969,#163977,#163986,#163994,#164003, + #164011,#164019,#164027,#164036)); +#163958 = ORIENTED_EDGE('',*,*,#163959,.T.); +#163959 = EDGE_CURVE('',#163960,#163962,#163964,.T.); +#163960 = VERTEX_POINT('',#163961); +#163961 = CARTESIAN_POINT('',(91.93415,-104.2631,1.585)); +#163962 = VERTEX_POINT('',#163963); +#163963 = CARTESIAN_POINT('',(91.99415,-104.2031,1.585)); +#163964 = CIRCLE('',#163965,5.999932016258E-02); +#163965 = AXIS2_PLACEMENT_3D('',#163966,#163967,#163968); +#163966 = CARTESIAN_POINT('',(91.994149320159,-104.2630993201,1.585)); +#163967 = DIRECTION('',(0.,0.,-1.)); +#163968 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#163969 = ORIENTED_EDGE('',*,*,#163970,.T.); +#163970 = EDGE_CURVE('',#163962,#163971,#163973,.T.); +#163971 = VERTEX_POINT('',#163972); +#163972 = CARTESIAN_POINT('',(93.51415,-104.2031,1.585)); +#163973 = LINE('',#163974,#163975); +#163974 = CARTESIAN_POINT('',(91.99415,-104.2031,1.585)); +#163975 = VECTOR('',#163976,1.); +#163976 = DIRECTION('',(1.,0.,0.)); +#163977 = ORIENTED_EDGE('',*,*,#163978,.T.); +#163978 = EDGE_CURVE('',#163971,#163979,#163981,.T.); +#163979 = VERTEX_POINT('',#163980); +#163980 = CARTESIAN_POINT('',(93.57415,-104.2631,1.585)); +#163981 = CIRCLE('',#163982,5.999932016258E-02); +#163982 = AXIS2_PLACEMENT_3D('',#163983,#163984,#163985); +#163983 = CARTESIAN_POINT('',(93.514150679841,-104.2630993201,1.585)); +#163984 = DIRECTION('',(0.,0.,-1.)); +#163985 = DIRECTION('',(-1.133081635828E-05,0.999999999936,0.)); +#163986 = ORIENTED_EDGE('',*,*,#163987,.T.); +#163987 = EDGE_CURVE('',#163979,#163988,#163990,.T.); +#163988 = VERTEX_POINT('',#163989); +#163989 = CARTESIAN_POINT('',(93.57415,-105.2631,1.585)); +#163990 = LINE('',#163991,#163992); +#163991 = CARTESIAN_POINT('',(93.57415,-104.2631,1.585)); +#163992 = VECTOR('',#163993,1.); +#163993 = DIRECTION('',(0.,-1.,0.)); +#163994 = ORIENTED_EDGE('',*,*,#163995,.T.); +#163995 = EDGE_CURVE('',#163988,#163996,#163998,.T.); +#163996 = VERTEX_POINT('',#163997); +#163997 = CARTESIAN_POINT('',(93.45415,-105.2631,1.585)); +#163998 = CIRCLE('',#163999,6.000000000042E-02); +#163999 = AXIS2_PLACEMENT_3D('',#164000,#164001,#164002); +#164000 = CARTESIAN_POINT('',(93.51415,-105.2631002255,1.585)); +#164001 = DIRECTION('',(0.,0.,-1.)); +#164002 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#164003 = ORIENTED_EDGE('',*,*,#164004,.T.); +#164004 = EDGE_CURVE('',#163996,#164005,#164007,.T.); +#164005 = VERTEX_POINT('',#164006); +#164006 = CARTESIAN_POINT('',(93.45415,-104.3231,1.585)); +#164007 = LINE('',#164008,#164009); +#164008 = CARTESIAN_POINT('',(93.45415,-105.2631,1.585)); +#164009 = VECTOR('',#164010,1.); +#164010 = DIRECTION('',(0.,1.,0.)); +#164011 = ORIENTED_EDGE('',*,*,#164012,.T.); +#164012 = EDGE_CURVE('',#164005,#164013,#164015,.T.); +#164013 = VERTEX_POINT('',#164014); +#164014 = CARTESIAN_POINT('',(92.052161,-104.3231,1.585)); +#164015 = LINE('',#164016,#164017); +#164016 = CARTESIAN_POINT('',(93.45415,-104.3231,1.585)); +#164017 = VECTOR('',#164018,1.); +#164018 = DIRECTION('',(-1.,0.,0.)); +#164019 = ORIENTED_EDGE('',*,*,#164020,.T.); +#164020 = EDGE_CURVE('',#164013,#164021,#164023,.T.); +#164021 = VERTEX_POINT('',#164022); +#164022 = CARTESIAN_POINT('',(92.049583,-104.336061,1.585)); +#164023 = LINE('',#164024,#164025); +#164024 = CARTESIAN_POINT('',(92.052161,-104.3231,1.585)); +#164025 = VECTOR('',#164026,1.); +#164026 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#164027 = ORIENTED_EDGE('',*,*,#164028,.T.); +#164028 = EDGE_CURVE('',#164021,#164029,#164031,.T.); +#164029 = VERTEX_POINT('',#164030); +#164030 = CARTESIAN_POINT('',(91.93415,-104.3131,1.585)); +#164031 = CIRCLE('',#164032,6.000007318647E-02); +#164032 = AXIS2_PLACEMENT_3D('',#164033,#164034,#164035); +#164033 = CARTESIAN_POINT('',(91.994150073186,-104.3131001766,1.585)); +#164034 = DIRECTION('',(-0.,0.,-1.)); +#164035 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#164036 = ORIENTED_EDGE('',*,*,#164037,.T.); +#164037 = EDGE_CURVE('',#164029,#163960,#164038,.T.); +#164038 = LINE('',#164039,#164040); +#164039 = CARTESIAN_POINT('',(91.93415,-104.3131,1.585)); +#164040 = VECTOR('',#164041,1.); +#164041 = DIRECTION('',(0.,1.,0.)); +#164042 = PLANE('',#164043); +#164043 = AXIS2_PLACEMENT_3D('',#164044,#164045,#164046); +#164044 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164045 = DIRECTION('',(0.,0.,1.)); +#164046 = DIRECTION('',(1.,0.,-0.)); +#164047 = SHELL_BASED_SURFACE_MODEL('',(#164048)); +#164048 = OPEN_SHELL('',(#164049)); +#164049 = ADVANCED_FACE('',(#164050),#164086,.T.); +#164050 = FACE_BOUND('',#164051,.F.); +#164051 = EDGE_LOOP('',(#164052,#164063,#164071,#164080)); +#164052 = ORIENTED_EDGE('',*,*,#164053,.T.); +#164053 = EDGE_CURVE('',#164054,#164056,#164058,.T.); +#164054 = VERTEX_POINT('',#164055); +#164055 = CARTESIAN_POINT('',(130.730398,-105.1181,1.585)); +#164056 = VERTEX_POINT('',#164057); +#164057 = CARTESIAN_POINT('',(130.730398,-104.9981,1.585)); +#164058 = CIRCLE('',#164059,6.000000000042E-02); +#164059 = AXIS2_PLACEMENT_3D('',#164060,#164061,#164062); +#164060 = CARTESIAN_POINT('',(130.73039777441,-105.0581,1.585)); +#164061 = DIRECTION('',(0.,0.,-1.)); +#164062 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#164063 = ORIENTED_EDGE('',*,*,#164064,.T.); +#164064 = EDGE_CURVE('',#164056,#164065,#164067,.T.); +#164065 = VERTEX_POINT('',#164066); +#164066 = CARTESIAN_POINT('',(131.252902,-104.9981,1.585)); +#164067 = LINE('',#164068,#164069); +#164068 = CARTESIAN_POINT('',(130.730398,-104.9981,1.585)); +#164069 = VECTOR('',#164070,1.); +#164070 = DIRECTION('',(1.,0.,0.)); +#164071 = ORIENTED_EDGE('',*,*,#164072,.T.); +#164072 = EDGE_CURVE('',#164065,#164073,#164075,.T.); +#164073 = VERTEX_POINT('',#164074); +#164074 = CARTESIAN_POINT('',(131.252902,-105.1181,1.585)); +#164075 = CIRCLE('',#164076,6.000000000043E-02); +#164076 = AXIS2_PLACEMENT_3D('',#164077,#164078,#164079); +#164077 = CARTESIAN_POINT('',(131.25290222558,-105.0581,1.585)); +#164078 = DIRECTION('',(0.,0.,-1.)); +#164079 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#164080 = ORIENTED_EDGE('',*,*,#164081,.T.); +#164081 = EDGE_CURVE('',#164073,#164054,#164082,.T.); +#164082 = LINE('',#164083,#164084); +#164083 = CARTESIAN_POINT('',(131.252902,-105.1181,1.585)); +#164084 = VECTOR('',#164085,1.); +#164085 = DIRECTION('',(-1.,0.,0.)); +#164086 = PLANE('',#164087); +#164087 = AXIS2_PLACEMENT_3D('',#164088,#164089,#164090); +#164088 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164089 = DIRECTION('',(0.,0.,1.)); +#164090 = DIRECTION('',(1.,0.,-0.)); +#164091 = SHELL_BASED_SURFACE_MODEL('',(#164092)); +#164092 = OPEN_SHELL('',(#164093)); +#164093 = ADVANCED_FACE('',(#164094),#164130,.T.); +#164094 = FACE_BOUND('',#164095,.F.); +#164095 = EDGE_LOOP('',(#164096,#164107,#164115,#164124)); +#164096 = ORIENTED_EDGE('',*,*,#164097,.T.); +#164097 = EDGE_CURVE('',#164098,#164100,#164102,.T.); +#164098 = VERTEX_POINT('',#164099); +#164099 = CARTESIAN_POINT('',(134.754392,-104.9056,1.585)); +#164100 = VERTEX_POINT('',#164101); +#164101 = CARTESIAN_POINT('',(134.754392,-104.7856,1.585)); +#164102 = CIRCLE('',#164103,6.000000000043E-02); +#164103 = AXIS2_PLACEMENT_3D('',#164104,#164105,#164106); +#164104 = CARTESIAN_POINT('',(134.75439177441,-104.8456,1.585)); +#164105 = DIRECTION('',(0.,0.,-1.)); +#164106 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#164107 = ORIENTED_EDGE('',*,*,#164108,.T.); +#164108 = EDGE_CURVE('',#164100,#164109,#164111,.T.); +#164109 = VERTEX_POINT('',#164110); +#164110 = CARTESIAN_POINT('',(135.228908,-104.7856,1.585)); +#164111 = LINE('',#164112,#164113); +#164112 = CARTESIAN_POINT('',(134.754392,-104.7856,1.585)); +#164113 = VECTOR('',#164114,1.); +#164114 = DIRECTION('',(1.,0.,0.)); +#164115 = ORIENTED_EDGE('',*,*,#164116,.T.); +#164116 = EDGE_CURVE('',#164109,#164117,#164119,.T.); +#164117 = VERTEX_POINT('',#164118); +#164118 = CARTESIAN_POINT('',(135.228908,-104.9056,1.585)); +#164119 = CIRCLE('',#164120,6.000000000043E-02); +#164120 = AXIS2_PLACEMENT_3D('',#164121,#164122,#164123); +#164121 = CARTESIAN_POINT('',(135.22890822558,-104.8456,1.585)); +#164122 = DIRECTION('',(0.,0.,-1.)); +#164123 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#164124 = ORIENTED_EDGE('',*,*,#164125,.T.); +#164125 = EDGE_CURVE('',#164117,#164098,#164126,.T.); +#164126 = LINE('',#164127,#164128); +#164127 = CARTESIAN_POINT('',(135.228908,-104.9056,1.585)); +#164128 = VECTOR('',#164129,1.); +#164129 = DIRECTION('',(-1.,0.,0.)); +#164130 = PLANE('',#164131); +#164131 = AXIS2_PLACEMENT_3D('',#164132,#164133,#164134); +#164132 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164133 = DIRECTION('',(0.,0.,1.)); +#164134 = DIRECTION('',(1.,0.,-0.)); +#164135 = SHELL_BASED_SURFACE_MODEL('',(#164136)); +#164136 = OPEN_SHELL('',(#164137)); +#164137 = ADVANCED_FACE('',(#164138),#164323,.T.); +#164138 = FACE_BOUND('',#164139,.F.); +#164139 = EDGE_LOOP('',(#164140,#164151,#164159,#164168,#164176,#164185, + #164193,#164201,#164209,#164218,#164226,#164235,#164243,#164252, + #164260,#164268,#164276,#164284,#164292,#164300,#164308,#164317)); +#164140 = ORIENTED_EDGE('',*,*,#164141,.T.); +#164141 = EDGE_CURVE('',#164142,#164144,#164146,.T.); +#164142 = VERTEX_POINT('',#164143); +#164143 = CARTESIAN_POINT('',(199.880039,-103.853597,1.585)); +#164144 = VERTEX_POINT('',#164145); +#164145 = CARTESIAN_POINT('',(199.97474,-103.96899,1.585)); +#164146 = CIRCLE('',#164147,7.500003178656E-02); +#164147 = AXIS2_PLACEMENT_3D('',#164148,#164149,#164150); +#164148 = CARTESIAN_POINT('',(199.9217065,-103.9159574378,1.585)); +#164149 = DIRECTION('',(0.,0.,-1.)); +#164150 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#164151 = ORIENTED_EDGE('',*,*,#164152,.T.); +#164152 = EDGE_CURVE('',#164144,#164153,#164155,.T.); +#164153 = VERTEX_POINT('',#164154); +#164154 = CARTESIAN_POINT('',(199.93964,-104.004089,1.585)); +#164155 = LINE('',#164156,#164157); +#164156 = CARTESIAN_POINT('',(199.97474,-103.96899,1.585)); +#164157 = VECTOR('',#164158,1.); +#164158 = DIRECTION('',(-0.707116854005,-0.707096708225,0.)); +#164159 = ORIENTED_EDGE('',*,*,#164160,.T.); +#164160 = EDGE_CURVE('',#164153,#164161,#164163,.T.); +#164161 = VERTEX_POINT('',#164162); +#164162 = CARTESIAN_POINT('',(199.93964,-104.304014,1.585)); +#164163 = CIRCLE('',#164164,0.299310989749); +#164164 = AXIS2_PLACEMENT_3D('',#164165,#164166,#164167); +#164165 = CARTESIAN_POINT('',(200.19867342868,-104.1540515,1.585)); +#164166 = DIRECTION('',(0.,0.,1.)); +#164167 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#164168 = ORIENTED_EDGE('',*,*,#164169,.T.); +#164169 = EDGE_CURVE('',#164161,#164170,#164172,.T.); +#164170 = VERTEX_POINT('',#164171); +#164171 = CARTESIAN_POINT('',(200.013753,-104.378127,1.585)); +#164172 = LINE('',#164173,#164174); +#164173 = CARTESIAN_POINT('',(199.93964,-104.304014,1.585)); +#164174 = VECTOR('',#164175,1.); +#164175 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#164176 = ORIENTED_EDGE('',*,*,#164177,.T.); +#164177 = EDGE_CURVE('',#164170,#164178,#164180,.T.); +#164178 = VERTEX_POINT('',#164179); +#164179 = CARTESIAN_POINT('',(200.388663,-104.460004,1.585)); +#164180 = CIRCLE('',#164181,0.611738044646); +#164181 = AXIS2_PLACEMENT_3D('',#164182,#164183,#164184); +#164182 = CARTESIAN_POINT('',(200.32514337395,-103.8515726625,1.585)); +#164183 = DIRECTION('',(0.,0.,1.)); +#164184 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#164185 = ORIENTED_EDGE('',*,*,#164186,.T.); +#164186 = EDGE_CURVE('',#164178,#164187,#164189,.T.); +#164187 = VERTEX_POINT('',#164188); +#164188 = CARTESIAN_POINT('',(200.562197,-104.41662,1.585)); +#164189 = LINE('',#164190,#164191); +#164190 = CARTESIAN_POINT('',(200.388663,-104.460004,1.585)); +#164191 = VECTOR('',#164192,1.); +#164192 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#164193 = ORIENTED_EDGE('',*,*,#164194,.T.); +#164194 = EDGE_CURVE('',#164187,#164195,#164197,.T.); +#164195 = VERTEX_POINT('',#164196); +#164196 = CARTESIAN_POINT('',(200.639184,-104.378126,1.585)); +#164197 = LINE('',#164198,#164199); +#164198 = CARTESIAN_POINT('',(200.562197,-104.41662,1.585)); +#164199 = VECTOR('',#164200,1.); +#164200 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#164201 = ORIENTED_EDGE('',*,*,#164202,.T.); +#164202 = EDGE_CURVE('',#164195,#164203,#164205,.T.); +#164203 = VERTEX_POINT('',#164204); +#164204 = CARTESIAN_POINT('',(200.713298,-104.304013,1.585)); +#164205 = LINE('',#164206,#164207); +#164206 = CARTESIAN_POINT('',(200.639184,-104.378126,1.585)); +#164207 = VECTOR('',#164208,1.); +#164208 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#164209 = ORIENTED_EDGE('',*,*,#164210,.T.); +#164210 = EDGE_CURVE('',#164203,#164211,#164213,.T.); +#164211 = VERTEX_POINT('',#164212); +#164212 = CARTESIAN_POINT('',(200.713298,-104.00409,1.585)); +#164213 = CIRCLE('',#164214,0.299306284995); +#164214 = AXIS2_PLACEMENT_3D('',#164215,#164216,#164217); +#164215 = CARTESIAN_POINT('',(200.45426942868,-104.1540515,1.585)); +#164216 = DIRECTION('',(0.,-0.,1.)); +#164217 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#164218 = ORIENTED_EDGE('',*,*,#164219,.T.); +#164219 = EDGE_CURVE('',#164211,#164220,#164222,.T.); +#164220 = VERTEX_POINT('',#164221); +#164221 = CARTESIAN_POINT('',(200.66887,-103.957625,1.585)); +#164222 = LINE('',#164223,#164224); +#164223 = CARTESIAN_POINT('',(200.713298,-104.00409,1.585)); +#164224 = VECTOR('',#164225,1.); +#164225 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#164226 = ORIENTED_EDGE('',*,*,#164227,.T.); +#164227 = EDGE_CURVE('',#164220,#164228,#164230,.T.); +#164228 = VERTEX_POINT('',#164229); +#164229 = CARTESIAN_POINT('',(200.784262,-103.862923,1.585)); +#164230 = CIRCLE('',#164231,7.499993690526E-02); +#164231 = AXIS2_PLACEMENT_3D('',#164232,#164233,#164234); +#164232 = CARTESIAN_POINT('',(200.73122982375,-103.9159567516,1.585)); +#164233 = DIRECTION('',(0.,0.,-1.)); +#164234 = DIRECTION('',(-0.831465016204,-0.555577111506,-0.)); +#164235 = ORIENTED_EDGE('',*,*,#164236,.T.); +#164236 = EDGE_CURVE('',#164228,#164237,#164239,.T.); +#164237 = VERTEX_POINT('',#164238); +#164238 = CARTESIAN_POINT('',(200.844007,-103.926433,1.585)); +#164239 = LINE('',#164240,#164241); +#164240 = CARTESIAN_POINT('',(200.784262,-103.862923,1.585)); +#164241 = VECTOR('',#164242,1.); +#164242 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#164243 = ORIENTED_EDGE('',*,*,#164244,.T.); +#164244 = EDGE_CURVE('',#164237,#164245,#164247,.T.); +#164245 = VERTEX_POINT('',#164246); +#164246 = CARTESIAN_POINT('',(200.841211,-104.386196,1.585)); +#164247 = CIRCLE('',#164248,0.461068563463); +#164248 = AXIS2_PLACEMENT_3D('',#164249,#164250,#164251); +#164249 = CARTESIAN_POINT('',(200.44294557362,-104.1538839891,1.585)); +#164250 = DIRECTION('',(0.,0.,-1.)); +#164251 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#164252 = ORIENTED_EDGE('',*,*,#164253,.T.); +#164253 = EDGE_CURVE('',#164245,#164254,#164256,.T.); +#164254 = VERTEX_POINT('',#164255); +#164255 = CARTESIAN_POINT('',(200.723448,-104.502884,1.585)); +#164256 = LINE('',#164257,#164258); +#164257 = CARTESIAN_POINT('',(200.841211,-104.386196,1.585)); +#164258 = VECTOR('',#164259,1.); +#164259 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#164260 = ORIENTED_EDGE('',*,*,#164261,.T.); +#164261 = EDGE_CURVE('',#164254,#164262,#164264,.T.); +#164262 = VERTEX_POINT('',#164263); +#164263 = CARTESIAN_POINT('',(200.606563,-104.560146,1.585)); +#164264 = LINE('',#164265,#164266); +#164265 = CARTESIAN_POINT('',(200.723448,-104.502884,1.585)); +#164266 = VECTOR('',#164267,1.); +#164267 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#164268 = ORIENTED_EDGE('',*,*,#164269,.T.); +#164269 = EDGE_CURVE('',#164262,#164270,#164272,.T.); +#164270 = VERTEX_POINT('',#164271); +#164271 = CARTESIAN_POINT('',(200.397897,-104.610004,1.585)); +#164272 = LINE('',#164273,#164274); +#164273 = CARTESIAN_POINT('',(200.606563,-104.560146,1.585)); +#164274 = VECTOR('',#164275,1.); +#164275 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#164276 = ORIENTED_EDGE('',*,*,#164277,.T.); +#164277 = EDGE_CURVE('',#164270,#164278,#164280,.T.); +#164278 = VERTEX_POINT('',#164279); +#164279 = CARTESIAN_POINT('',(200.23685,-104.607765,1.585)); +#164280 = LINE('',#164281,#164282); +#164281 = CARTESIAN_POINT('',(200.397897,-104.610004,1.585)); +#164282 = VECTOR('',#164283,1.); +#164283 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#164284 = ORIENTED_EDGE('',*,*,#164285,.T.); +#164285 = EDGE_CURVE('',#164278,#164286,#164288,.T.); +#164286 = VERTEX_POINT('',#164287); +#164287 = CARTESIAN_POINT('',(200.031023,-104.554467,1.585)); +#164288 = LINE('',#164289,#164290); +#164289 = CARTESIAN_POINT('',(200.23685,-104.607765,1.585)); +#164290 = VECTOR('',#164291,1.); +#164291 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#164292 = ORIENTED_EDGE('',*,*,#164293,.T.); +#164293 = EDGE_CURVE('',#164286,#164294,#164296,.T.); +#164294 = VERTEX_POINT('',#164295); +#164295 = CARTESIAN_POINT('',(199.922043,-104.497519,1.585)); +#164296 = LINE('',#164297,#164298); +#164297 = CARTESIAN_POINT('',(200.031023,-104.554467,1.585)); +#164298 = VECTOR('',#164299,1.); +#164299 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#164300 = ORIENTED_EDGE('',*,*,#164301,.T.); +#164301 = EDGE_CURVE('',#164294,#164302,#164304,.T.); +#164302 = VERTEX_POINT('',#164303); +#164303 = CARTESIAN_POINT('',(199.808931,-104.38167,1.585)); +#164304 = LINE('',#164305,#164306); +#164305 = CARTESIAN_POINT('',(199.922043,-104.497519,1.585)); +#164306 = VECTOR('',#164307,1.); +#164307 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#164308 = ORIENTED_EDGE('',*,*,#164309,.T.); +#164309 = EDGE_CURVE('',#164302,#164310,#164312,.T.); +#164310 = VERTEX_POINT('',#164311); +#164311 = CARTESIAN_POINT('',(199.811728,-103.921908,1.585)); +#164312 = CIRCLE('',#164313,0.461058290907); +#164313 = AXIS2_PLACEMENT_3D('',#164314,#164315,#164316); +#164314 = CARTESIAN_POINT('',(200.20998135644,-104.1542203149,1.585)); +#164315 = DIRECTION('',(0.,0.,-1.)); +#164316 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#164317 = ORIENTED_EDGE('',*,*,#164318,.T.); +#164318 = EDGE_CURVE('',#164310,#164142,#164319,.T.); +#164319 = LINE('',#164320,#164321); +#164320 = CARTESIAN_POINT('',(199.811728,-103.921908,1.585)); +#164321 = VECTOR('',#164322,1.); +#164322 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#164323 = PLANE('',#164324); +#164324 = AXIS2_PLACEMENT_3D('',#164325,#164326,#164327); +#164325 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164326 = DIRECTION('',(0.,0.,1.)); +#164327 = DIRECTION('',(1.,0.,-0.)); +#164328 = SHELL_BASED_SURFACE_MODEL('',(#164329)); +#164329 = OPEN_SHELL('',(#164330)); +#164330 = ADVANCED_FACE('',(#164331,#164519),#164653,.T.); +#164331 = FACE_BOUND('',#164332,.F.); +#164332 = EDGE_LOOP('',(#164333,#164344,#164352,#164360,#164368,#164376, + #164384,#164392,#164400,#164408,#164416,#164425,#164433,#164441, + #164449,#164457,#164465,#164473,#164481,#164489,#164497,#164505, + #164513)); +#164333 = ORIENTED_EDGE('',*,*,#164334,.T.); +#164334 = EDGE_CURVE('',#164335,#164337,#164339,.T.); +#164335 = VERTEX_POINT('',#164336); +#164336 = CARTESIAN_POINT('',(92.047647,-102.862418,1.585)); +#164337 = VERTEX_POINT('',#164338); +#164338 = CARTESIAN_POINT('',(92.515718,-102.867786,1.585)); +#164339 = CIRCLE('',#164340,0.397578964435); +#164340 = AXIS2_PLACEMENT_3D('',#164341,#164342,#164343); +#164341 = CARTESIAN_POINT('',(92.277996972123,-103.1864672606,1.585)); +#164342 = DIRECTION('',(0.,0.,-1.)); +#164343 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#164344 = ORIENTED_EDGE('',*,*,#164345,.T.); +#164345 = EDGE_CURVE('',#164337,#164346,#164348,.T.); +#164346 = VERTEX_POINT('',#164347); +#164347 = CARTESIAN_POINT('',(92.626034,-102.979108,1.585)); +#164348 = LINE('',#164349,#164350); +#164349 = CARTESIAN_POINT('',(92.515718,-102.867786,1.585)); +#164350 = VECTOR('',#164351,1.); +#164351 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#164352 = ORIENTED_EDGE('',*,*,#164353,.T.); +#164353 = EDGE_CURVE('',#164346,#164354,#164356,.T.); +#164354 = VERTEX_POINT('',#164355); +#164355 = CARTESIAN_POINT('',(92.636434,-103.002586,1.585)); +#164356 = LINE('',#164357,#164358); +#164357 = CARTESIAN_POINT('',(92.626034,-102.979108,1.585)); +#164358 = VECTOR('',#164359,1.); +#164359 = DIRECTION('',(0.405010807319,-0.914311897524,0.)); +#164360 = ORIENTED_EDGE('',*,*,#164361,.T.); +#164361 = EDGE_CURVE('',#164354,#164362,#164364,.T.); +#164362 = VERTEX_POINT('',#164363); +#164363 = CARTESIAN_POINT('',(92.686292,-103.211252,1.585)); +#164364 = LINE('',#164365,#164366); +#164365 = CARTESIAN_POINT('',(92.636434,-103.002586,1.585)); +#164366 = VECTOR('',#164367,1.); +#164367 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#164368 = ORIENTED_EDGE('',*,*,#164369,.T.); +#164369 = EDGE_CURVE('',#164362,#164370,#164372,.T.); +#164370 = VERTEX_POINT('',#164371); +#164371 = CARTESIAN_POINT('',(92.684053,-103.562775,1.585)); +#164372 = LINE('',#164373,#164374); +#164373 = CARTESIAN_POINT('',(92.686292,-103.211252,1.585)); +#164374 = VECTOR('',#164375,1.); +#164375 = DIRECTION('',(-6.369297552953E-03,-0.999979715819,0.)); +#164376 = ORIENTED_EDGE('',*,*,#164377,.T.); +#164377 = EDGE_CURVE('',#164370,#164378,#164380,.T.); +#164378 = VERTEX_POINT('',#164379); +#164379 = CARTESIAN_POINT('',(92.631487,-103.767097,1.585)); +#164380 = LINE('',#164381,#164382); +#164381 = CARTESIAN_POINT('',(92.684053,-103.562775,1.585)); +#164382 = VECTOR('',#164383,1.); +#164383 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#164384 = ORIENTED_EDGE('',*,*,#164385,.T.); +#164385 = EDGE_CURVE('',#164378,#164386,#164388,.T.); +#164386 = VERTEX_POINT('',#164387); +#164387 = CARTESIAN_POINT('',(92.616707,-103.788093,1.585)); +#164388 = LINE('',#164389,#164390); +#164389 = CARTESIAN_POINT('',(92.631487,-103.767097,1.585)); +#164390 = VECTOR('',#164391,1.); +#164391 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#164392 = ORIENTED_EDGE('',*,*,#164393,.T.); +#164393 = EDGE_CURVE('',#164386,#164394,#164396,.T.); +#164394 = VERTEX_POINT('',#164395); +#164395 = CARTESIAN_POINT('',(92.5745,-103.830299,1.585)); +#164396 = LINE('',#164397,#164398); +#164397 = CARTESIAN_POINT('',(92.616707,-103.788093,1.585)); +#164398 = VECTOR('',#164399,1.); +#164399 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#164400 = ORIENTED_EDGE('',*,*,#164401,.T.); +#164401 = EDGE_CURVE('',#164394,#164402,#164404,.T.); +#164402 = VERTEX_POINT('',#164403); +#164403 = CARTESIAN_POINT('',(92.6081,-103.863899,1.585)); +#164404 = LINE('',#164405,#164406); +#164405 = CARTESIAN_POINT('',(92.5745,-103.830299,1.585)); +#164406 = VECTOR('',#164407,1.); +#164407 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#164408 = ORIENTED_EDGE('',*,*,#164409,.T.); +#164409 = EDGE_CURVE('',#164402,#164410,#164412,.T.); +#164410 = VERTEX_POINT('',#164411); +#164411 = CARTESIAN_POINT('',(92.704895,-103.913907,1.585)); +#164412 = LINE('',#164413,#164414); +#164413 = CARTESIAN_POINT('',(92.6081,-103.863899,1.585)); +#164414 = VECTOR('',#164415,1.); +#164415 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#164416 = ORIENTED_EDGE('',*,*,#164417,.T.); +#164417 = EDGE_CURVE('',#164410,#164418,#164420,.T.); +#164418 = VERTEX_POINT('',#164419); +#164419 = CARTESIAN_POINT('',(92.62537,-104.040239,1.585)); +#164420 = CIRCLE('',#164421,7.500029440362E-02); +#164421 = AXIS2_PLACEMENT_3D('',#164422,#164423,#164424); +#164422 = CARTESIAN_POINT('',(92.658911053971,-103.9731566486,1.585)); +#164423 = DIRECTION('',(0.,0.,-1.)); +#164424 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#164425 = ORIENTED_EDGE('',*,*,#164426,.T.); +#164426 = EDGE_CURVE('',#164418,#164427,#164429,.T.); +#164427 = VERTEX_POINT('',#164428); +#164428 = CARTESIAN_POINT('',(92.51639,-103.983291,1.585)); +#164429 = LINE('',#164430,#164431); +#164430 = CARTESIAN_POINT('',(92.62537,-104.040239,1.585)); +#164431 = VECTOR('',#164432,1.); +#164432 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#164433 = ORIENTED_EDGE('',*,*,#164434,.T.); +#164434 = EDGE_CURVE('',#164427,#164435,#164437,.T.); +#164435 = VERTEX_POINT('',#164436); +#164436 = CARTESIAN_POINT('',(92.453626,-103.921557,1.585)); +#164437 = LINE('',#164438,#164439); +#164438 = CARTESIAN_POINT('',(92.51639,-103.983291,1.585)); +#164439 = VECTOR('',#164440,1.); +#164440 = DIRECTION('',(-0.712932436519,0.701232729527,0.)); +#164441 = ORIENTED_EDGE('',*,*,#164442,.T.); +#164442 = EDGE_CURVE('',#164435,#164443,#164445,.T.); +#164443 = VERTEX_POINT('',#164444); +#164444 = CARTESIAN_POINT('',(92.387829,-103.951478,1.585)); +#164445 = LINE('',#164446,#164447); +#164446 = CARTESIAN_POINT('',(92.453626,-103.921557,1.585)); +#164447 = VECTOR('',#164448,1.); +#164448 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#164449 = ORIENTED_EDGE('',*,*,#164450,.T.); +#164450 = EDGE_CURVE('',#164443,#164451,#164453,.T.); +#164451 = VERTEX_POINT('',#164452); +#164452 = CARTESIAN_POINT('',(92.162911,-103.950256,1.585)); +#164453 = LINE('',#164454,#164455); +#164454 = CARTESIAN_POINT('',(92.387829,-103.951478,1.585)); +#164455 = VECTOR('',#164456,1.); +#164456 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#164457 = ORIENTED_EDGE('',*,*,#164458,.T.); +#164458 = EDGE_CURVE('',#164451,#164459,#164461,.T.); +#164459 = VERTEX_POINT('',#164460); +#164460 = CARTESIAN_POINT('',(92.0402,-103.888053,1.585)); +#164461 = LINE('',#164462,#164463); +#164462 = CARTESIAN_POINT('',(92.162911,-103.950256,1.585)); +#164463 = VECTOR('',#164464,1.); +#164464 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#164465 = ORIENTED_EDGE('',*,*,#164466,.T.); +#164466 = EDGE_CURVE('',#164459,#164467,#164469,.T.); +#164467 = VERTEX_POINT('',#164468); +#164468 = CARTESIAN_POINT('',(91.929884,-103.776728,1.585)); +#164469 = LINE('',#164470,#164471); +#164470 = CARTESIAN_POINT('',(92.0402,-103.888053,1.585)); +#164471 = VECTOR('',#164472,1.); +#164472 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#164473 = ORIENTED_EDGE('',*,*,#164474,.T.); +#164474 = EDGE_CURVE('',#164467,#164475,#164477,.T.); +#164475 = VERTEX_POINT('',#164476); +#164476 = CARTESIAN_POINT('',(91.919484,-103.753251,1.585)); +#164477 = LINE('',#164478,#164479); +#164478 = CARTESIAN_POINT('',(91.929884,-103.776728,1.585)); +#164479 = VECTOR('',#164480,1.); +#164480 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#164481 = ORIENTED_EDGE('',*,*,#164482,.T.); +#164482 = EDGE_CURVE('',#164475,#164483,#164485,.T.); +#164483 = VERTEX_POINT('',#164484); +#164484 = CARTESIAN_POINT('',(91.869626,-103.544585,1.585)); +#164485 = LINE('',#164486,#164487); +#164486 = CARTESIAN_POINT('',(91.919484,-103.753251,1.585)); +#164487 = VECTOR('',#164488,1.); +#164488 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#164489 = ORIENTED_EDGE('',*,*,#164490,.T.); +#164490 = EDGE_CURVE('',#164483,#164491,#164493,.T.); +#164491 = VERTEX_POINT('',#164492); +#164492 = CARTESIAN_POINT('',(91.871865,-103.193062,1.585)); +#164493 = LINE('',#164494,#164495); +#164494 = CARTESIAN_POINT('',(91.869626,-103.544585,1.585)); +#164495 = VECTOR('',#164496,1.); +#164496 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#164497 = ORIENTED_EDGE('',*,*,#164498,.T.); +#164498 = EDGE_CURVE('',#164491,#164499,#164501,.T.); +#164499 = VERTEX_POINT('',#164500); +#164500 = CARTESIAN_POINT('',(91.924431,-102.98874,1.585)); +#164501 = LINE('',#164502,#164503); +#164502 = CARTESIAN_POINT('',(91.871865,-103.193062,1.585)); +#164503 = VECTOR('',#164504,1.); +#164504 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#164505 = ORIENTED_EDGE('',*,*,#164506,.T.); +#164506 = EDGE_CURVE('',#164499,#164507,#164509,.T.); +#164507 = VERTEX_POINT('',#164508); +#164508 = CARTESIAN_POINT('',(91.939212,-102.967743,1.585)); +#164509 = LINE('',#164510,#164511); +#164510 = CARTESIAN_POINT('',(91.924431,-102.98874,1.585)); +#164511 = VECTOR('',#164512,1.); +#164512 = DIRECTION('',(0.575632310301,0.817708654313,0.)); +#164513 = ORIENTED_EDGE('',*,*,#164514,.T.); +#164514 = EDGE_CURVE('',#164507,#164335,#164515,.T.); +#164515 = LINE('',#164516,#164517); +#164516 = CARTESIAN_POINT('',(91.939212,-102.967743,1.585)); +#164517 = VECTOR('',#164518,1.); +#164518 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#164519 = FACE_BOUND('',#164520,.F.); +#164520 = EDGE_LOOP('',(#164521,#164532,#164540,#164549,#164557,#164565, + #164573,#164581,#164589,#164597,#164606,#164614,#164622,#164630, + #164638,#164647)); +#164521 = ORIENTED_EDGE('',*,*,#164522,.T.); +#164522 = EDGE_CURVE('',#164523,#164525,#164527,.T.); +#164523 = VERTEX_POINT('',#164524); +#164524 = CARTESIAN_POINT('',(92.424008,-102.987177,1.585)); +#164525 = VERTEX_POINT('',#164526); +#164526 = CARTESIAN_POINT('',(92.13191,-102.987177,1.585)); +#164527 = CIRCLE('',#164528,0.252889603602); +#164528 = AXIS2_PLACEMENT_3D('',#164529,#164530,#164531); +#164529 = CARTESIAN_POINT('',(92.277959,-103.19363,1.585)); +#164530 = DIRECTION('',(0.,0.,1.)); +#164531 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#164532 = ORIENTED_EDGE('',*,*,#164533,.T.); +#164533 = EDGE_CURVE('',#164525,#164534,#164536,.T.); +#164534 = VERTEX_POINT('',#164535); +#164535 = CARTESIAN_POINT('',(92.059967,-103.059119,1.585)); +#164536 = LINE('',#164537,#164538); +#164537 = CARTESIAN_POINT('',(92.13191,-102.987177,1.585)); +#164538 = VECTOR('',#164539,1.); +#164539 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#164540 = ORIENTED_EDGE('',*,*,#164541,.T.); +#164541 = EDGE_CURVE('',#164534,#164542,#164544,.T.); +#164542 = VERTEX_POINT('',#164543); +#164543 = CARTESIAN_POINT('',(92.059967,-103.696717,1.585)); +#164544 = CIRCLE('',#164545,0.985308713638); +#164545 = AXIS2_PLACEMENT_3D('',#164546,#164547,#164548); +#164546 = CARTESIAN_POINT('',(92.992276207704,-103.377918,1.585)); +#164547 = DIRECTION('',(0.,0.,1.)); +#164548 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#164549 = ORIENTED_EDGE('',*,*,#164550,.T.); +#164550 = EDGE_CURVE('',#164542,#164551,#164553,.T.); +#164551 = VERTEX_POINT('',#164552); +#164552 = CARTESIAN_POINT('',(92.13191,-103.768661,1.585)); +#164553 = LINE('',#164554,#164555); +#164554 = CARTESIAN_POINT('',(92.059967,-103.696717,1.585)); +#164555 = VECTOR('',#164556,1.); +#164556 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#164557 = ORIENTED_EDGE('',*,*,#164558,.T.); +#164558 = EDGE_CURVE('',#164551,#164559,#164561,.T.); +#164559 = VERTEX_POINT('',#164560); +#164560 = CARTESIAN_POINT('',(92.200426,-103.802919,1.585)); +#164561 = LINE('',#164562,#164563); +#164562 = CARTESIAN_POINT('',(92.13191,-103.768661,1.585)); +#164563 = VECTOR('',#164564,1.); +#164564 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#164565 = ORIENTED_EDGE('',*,*,#164566,.T.); +#164566 = EDGE_CURVE('',#164559,#164567,#164569,.T.); +#164567 = VERTEX_POINT('',#164568); +#164568 = CARTESIAN_POINT('',(92.334989,-103.802919,1.585)); +#164569 = LINE('',#164570,#164571); +#164570 = CARTESIAN_POINT('',(92.200426,-103.802919,1.585)); +#164571 = VECTOR('',#164572,1.); +#164572 = DIRECTION('',(1.,0.,0.)); +#164573 = ORIENTED_EDGE('',*,*,#164574,.T.); +#164574 = EDGE_CURVE('',#164567,#164575,#164577,.T.); +#164575 = VERTEX_POINT('',#164576); +#164576 = CARTESIAN_POINT('',(92.28115,-103.74908,1.585)); +#164577 = LINE('',#164578,#164579); +#164578 = CARTESIAN_POINT('',(92.334989,-103.802919,1.585)); +#164579 = VECTOR('',#164580,1.); +#164580 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164581 = ORIENTED_EDGE('',*,*,#164582,.T.); +#164582 = EDGE_CURVE('',#164575,#164583,#164585,.T.); +#164583 = VERTEX_POINT('',#164584); +#164584 = CARTESIAN_POINT('',(92.212635,-103.714823,1.585)); +#164585 = LINE('',#164586,#164587); +#164586 = CARTESIAN_POINT('',(92.28115,-103.74908,1.585)); +#164587 = VECTOR('',#164588,1.); +#164588 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#164589 = ORIENTED_EDGE('',*,*,#164590,.T.); +#164590 = EDGE_CURVE('',#164583,#164591,#164593,.T.); +#164591 = VERTEX_POINT('',#164592); +#164592 = CARTESIAN_POINT('',(92.12047,-103.713382,1.585)); +#164593 = LINE('',#164594,#164595); +#164594 = CARTESIAN_POINT('',(92.212635,-103.714823,1.585)); +#164595 = VECTOR('',#164596,1.); +#164596 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#164597 = ORIENTED_EDGE('',*,*,#164598,.T.); +#164598 = EDGE_CURVE('',#164591,#164599,#164601,.T.); +#164599 = VERTEX_POINT('',#164600); +#164600 = CARTESIAN_POINT('',(92.135102,-103.564823,1.585)); +#164601 = CIRCLE('',#164602,7.500006711464E-02); +#164602 = AXIS2_PLACEMENT_3D('',#164603,#164604,#164605); +#164603 = CARTESIAN_POINT('',(92.135101932885,-103.6398230671,1.585)); +#164604 = DIRECTION('',(0.,0.,-1.)); +#164605 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#164606 = ORIENTED_EDGE('',*,*,#164607,.T.); +#164607 = EDGE_CURVE('',#164599,#164608,#164610,.T.); +#164608 = VERTEX_POINT('',#164609); +#164609 = CARTESIAN_POINT('',(92.250149,-103.567486,1.585)); +#164610 = LINE('',#164611,#164612); +#164611 = CARTESIAN_POINT('',(92.135102,-103.564823,1.585)); +#164612 = VECTOR('',#164613,1.); +#164613 = DIRECTION('',(0.999732214371,-2.314086318521E-02,0.)); +#164614 = ORIENTED_EDGE('',*,*,#164615,.T.); +#164615 = EDGE_CURVE('',#164608,#164616,#164618,.T.); +#164616 = VERTEX_POINT('',#164617); +#164617 = CARTESIAN_POINT('',(92.372861,-103.62969,1.585)); +#164618 = LINE('',#164619,#164620); +#164619 = CARTESIAN_POINT('',(92.250149,-103.567486,1.585)); +#164620 = VECTOR('',#164621,1.); +#164621 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#164622 = ORIENTED_EDGE('',*,*,#164623,.T.); +#164623 = EDGE_CURVE('',#164616,#164624,#164626,.T.); +#164624 = VERTEX_POINT('',#164625); +#164625 = CARTESIAN_POINT('',(92.468434,-103.724233,1.585)); +#164626 = LINE('',#164627,#164628); +#164627 = CARTESIAN_POINT('',(92.372861,-103.62969,1.585)); +#164628 = VECTOR('',#164629,1.); +#164629 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#164630 = ORIENTED_EDGE('',*,*,#164631,.T.); +#164631 = EDGE_CURVE('',#164624,#164632,#164634,.T.); +#164632 = VERTEX_POINT('',#164633); +#164633 = CARTESIAN_POINT('',(92.49595,-103.696717,1.585)); +#164634 = LINE('',#164635,#164636); +#164635 = CARTESIAN_POINT('',(92.468434,-103.724233,1.585)); +#164636 = VECTOR('',#164637,1.); +#164637 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#164638 = ORIENTED_EDGE('',*,*,#164639,.T.); +#164639 = EDGE_CURVE('',#164632,#164640,#164642,.T.); +#164640 = VERTEX_POINT('',#164641); +#164641 = CARTESIAN_POINT('',(92.49595,-103.059119,1.585)); +#164642 = CIRCLE('',#164643,0.985282207896); +#164643 = AXIS2_PLACEMENT_3D('',#164644,#164645,#164646); +#164644 = CARTESIAN_POINT('',(91.563668804869,-103.377918,1.585)); +#164645 = DIRECTION('',(0.,-0.,1.)); +#164646 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#164647 = ORIENTED_EDGE('',*,*,#164648,.T.); +#164648 = EDGE_CURVE('',#164640,#164523,#164649,.T.); +#164649 = LINE('',#164650,#164651); +#164650 = CARTESIAN_POINT('',(92.49595,-103.059119,1.585)); +#164651 = VECTOR('',#164652,1.); +#164652 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164653 = PLANE('',#164654); +#164654 = AXIS2_PLACEMENT_3D('',#164655,#164656,#164657); +#164655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164656 = DIRECTION('',(0.,0.,1.)); +#164657 = DIRECTION('',(1.,0.,-0.)); +#164658 = SHELL_BASED_SURFACE_MODEL('',(#164659)); +#164659 = OPEN_SHELL('',(#164660)); +#164660 = ADVANCED_FACE('',(#164661),#164796,.T.); +#164661 = FACE_BOUND('',#164662,.F.); +#164662 = EDGE_LOOP('',(#164663,#164674,#164682,#164690,#164698,#164707, + #164715,#164723,#164732,#164740,#164748,#164757,#164765,#164773, + #164782,#164790)); +#164663 = ORIENTED_EDGE('',*,*,#164664,.T.); +#164664 = EDGE_CURVE('',#164665,#164667,#164669,.T.); +#164665 = VERTEX_POINT('',#164666); +#164666 = CARTESIAN_POINT('',(93.184357,-102.771051,1.585)); +#164667 = VERTEX_POINT('',#164668); +#164668 = CARTESIAN_POINT('',(93.301491,-102.854018,1.585)); +#164669 = CIRCLE('',#164670,7.499955990671E-02); +#164670 = AXIS2_PLACEMENT_3D('',#164671,#164672,#164673); +#164671 = CARTESIAN_POINT('',(93.230340500953,-102.8303000643,1.585)); +#164672 = DIRECTION('',(0.,0.,-1.)); +#164673 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#164674 = ORIENTED_EDGE('',*,*,#164675,.T.); +#164675 = EDGE_CURVE('',#164667,#164676,#164678,.T.); +#164676 = VERTEX_POINT('',#164677); +#164677 = CARTESIAN_POINT('',(93.096302,-103.469585,1.585)); +#164678 = LINE('',#164679,#164680); +#164679 = CARTESIAN_POINT('',(93.301491,-102.854018,1.585)); +#164680 = VECTOR('',#164681,1.); +#164681 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#164682 = ORIENTED_EDGE('',*,*,#164683,.T.); +#164683 = EDGE_CURVE('',#164676,#164684,#164686,.T.); +#164684 = VERTEX_POINT('',#164685); +#164685 = CARTESIAN_POINT('',(93.393435,-103.469585,1.585)); +#164686 = LINE('',#164687,#164688); +#164687 = CARTESIAN_POINT('',(93.096302,-103.469585,1.585)); +#164688 = VECTOR('',#164689,1.); +#164689 = DIRECTION('',(1.,0.,0.)); +#164690 = ORIENTED_EDGE('',*,*,#164691,.T.); +#164691 = EDGE_CURVE('',#164684,#164692,#164694,.T.); +#164692 = VERTEX_POINT('',#164693); +#164693 = CARTESIAN_POINT('',(93.394876,-103.19662,1.585)); +#164694 = LINE('',#164695,#164696); +#164695 = CARTESIAN_POINT('',(93.393435,-103.469585,1.585)); +#164696 = VECTOR('',#164697,1.); +#164697 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#164698 = ORIENTED_EDGE('',*,*,#164699,.T.); +#164699 = EDGE_CURVE('',#164692,#164700,#164702,.T.); +#164700 = VERTEX_POINT('',#164701); +#164701 = CARTESIAN_POINT('',(93.543435,-103.211252,1.585)); +#164702 = CIRCLE('',#164703,7.500006711464E-02); +#164703 = AXIS2_PLACEMENT_3D('',#164704,#164705,#164706); +#164704 = CARTESIAN_POINT('',(93.468434932885,-103.2112519328,1.585)); +#164705 = DIRECTION('',(0.,0.,-1.)); +#164706 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#164707 = ORIENTED_EDGE('',*,*,#164708,.T.); +#164708 = EDGE_CURVE('',#164700,#164709,#164711,.T.); +#164709 = VERTEX_POINT('',#164710); +#164710 = CARTESIAN_POINT('',(93.543435,-103.469585,1.585)); +#164711 = LINE('',#164712,#164713); +#164712 = CARTESIAN_POINT('',(93.543435,-103.211252,1.585)); +#164713 = VECTOR('',#164714,1.); +#164714 = DIRECTION('',(0.,-1.,0.)); +#164715 = ORIENTED_EDGE('',*,*,#164716,.T.); +#164716 = EDGE_CURVE('',#164709,#164717,#164719,.T.); +#164717 = VERTEX_POINT('',#164718); +#164718 = CARTESIAN_POINT('',(93.625924,-103.471026,1.585)); +#164719 = LINE('',#164720,#164721); +#164720 = CARTESIAN_POINT('',(93.543435,-103.469585,1.585)); +#164721 = VECTOR('',#164722,1.); +#164722 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#164723 = ORIENTED_EDGE('',*,*,#164724,.T.); +#164724 = EDGE_CURVE('',#164717,#164725,#164727,.T.); +#164725 = VERTEX_POINT('',#164726); +#164726 = CARTESIAN_POINT('',(93.611292,-103.619585,1.585)); +#164727 = CIRCLE('',#164728,7.500006711464E-02); +#164728 = AXIS2_PLACEMENT_3D('',#164729,#164730,#164731); +#164729 = CARTESIAN_POINT('',(93.611292067115,-103.5445849328,1.585)); +#164730 = DIRECTION('',(0.,0.,-1.)); +#164731 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#164732 = ORIENTED_EDGE('',*,*,#164733,.T.); +#164733 = EDGE_CURVE('',#164725,#164734,#164736,.T.); +#164734 = VERTEX_POINT('',#164735); +#164735 = CARTESIAN_POINT('',(93.543435,-103.619585,1.585)); +#164736 = LINE('',#164737,#164738); +#164737 = CARTESIAN_POINT('',(93.611292,-103.619585,1.585)); +#164738 = VECTOR('',#164739,1.); +#164739 = DIRECTION('',(-1.,0.,0.)); +#164740 = ORIENTED_EDGE('',*,*,#164741,.T.); +#164741 = EDGE_CURVE('',#164734,#164742,#164744,.T.); +#164742 = VERTEX_POINT('',#164743); +#164743 = CARTESIAN_POINT('',(93.541994,-103.892551,1.585)); +#164744 = LINE('',#164745,#164746); +#164745 = CARTESIAN_POINT('',(93.543435,-103.619585,1.585)); +#164746 = VECTOR('',#164747,1.); +#164747 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#164748 = ORIENTED_EDGE('',*,*,#164749,.T.); +#164749 = EDGE_CURVE('',#164742,#164750,#164752,.T.); +#164750 = VERTEX_POINT('',#164751); +#164751 = CARTESIAN_POINT('',(93.393435,-103.877919,1.585)); +#164752 = CIRCLE('',#164753,7.500006711464E-02); +#164753 = AXIS2_PLACEMENT_3D('',#164754,#164755,#164756); +#164754 = CARTESIAN_POINT('',(93.468435067115,-103.8779190671,1.585)); +#164755 = DIRECTION('',(-0.,0.,-1.)); +#164756 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#164757 = ORIENTED_EDGE('',*,*,#164758,.T.); +#164758 = EDGE_CURVE('',#164750,#164759,#164761,.T.); +#164759 = VERTEX_POINT('',#164760); +#164760 = CARTESIAN_POINT('',(93.393435,-103.619585,1.585)); +#164761 = LINE('',#164762,#164763); +#164762 = CARTESIAN_POINT('',(93.393435,-103.877919,1.585)); +#164763 = VECTOR('',#164764,1.); +#164764 = DIRECTION('',(0.,1.,0.)); +#164765 = ORIENTED_EDGE('',*,*,#164766,.T.); +#164766 = EDGE_CURVE('',#164759,#164767,#164769,.T.); +#164767 = VERTEX_POINT('',#164768); +#164768 = CARTESIAN_POINT('',(92.977613,-103.618144,1.585)); +#164769 = LINE('',#164770,#164771); +#164770 = CARTESIAN_POINT('',(93.393435,-103.619585,1.585)); +#164771 = VECTOR('',#164772,1.); +#164772 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#164773 = ORIENTED_EDGE('',*,*,#164774,.T.); +#164774 = EDGE_CURVE('',#164767,#164775,#164777,.T.); +#164775 = VERTEX_POINT('',#164776); +#164776 = CARTESIAN_POINT('',(92.921094,-103.520868,1.585)); +#164777 = CIRCLE('',#164778,7.499997045037E-02); +#164778 = AXIS2_PLACEMENT_3D('',#164779,#164780,#164781); +#164779 = CARTESIAN_POINT('',(92.992245172573,-103.5445852133,1.585)); +#164780 = DIRECTION('',(0.,0.,-1.)); +#164781 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#164782 = ORIENTED_EDGE('',*,*,#164783,.T.); +#164783 = EDGE_CURVE('',#164775,#164784,#164786,.T.); +#164784 = VERTEX_POINT('',#164785); +#164785 = CARTESIAN_POINT('',(93.165183,-102.793158,1.585)); +#164786 = LINE('',#164787,#164788); +#164787 = CARTESIAN_POINT('',(92.921094,-103.520868,1.585)); +#164788 = VECTOR('',#164789,1.); +#164789 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#164790 = ORIENTED_EDGE('',*,*,#164791,.T.); +#164791 = EDGE_CURVE('',#164784,#164665,#164792,.T.); +#164792 = LINE('',#164793,#164794); +#164793 = CARTESIAN_POINT('',(93.165183,-102.793158,1.585)); +#164794 = VECTOR('',#164795,1.); +#164795 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#164796 = PLANE('',#164797); +#164797 = AXIS2_PLACEMENT_3D('',#164798,#164799,#164800); +#164798 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164799 = DIRECTION('',(0.,0.,1.)); +#164800 = DIRECTION('',(1.,0.,-0.)); +#164801 = SHELL_BASED_SURFACE_MODEL('',(#164802)); +#164802 = OPEN_SHELL('',(#164803)); +#164803 = ADVANCED_FACE('',(#164804),#164906,.T.); +#164804 = FACE_BOUND('',#164805,.F.); +#164805 = EDGE_LOOP('',(#164806,#164817,#164825,#164834,#164842,#164850, + #164858,#164867,#164875,#164884,#164892,#164900)); +#164806 = ORIENTED_EDGE('',*,*,#164807,.T.); +#164807 = EDGE_CURVE('',#164808,#164810,#164812,.T.); +#164808 = VERTEX_POINT('',#164809); +#164809 = CARTESIAN_POINT('',(82.683526,-102.454261,1.585)); +#164810 = VERTEX_POINT('',#164811); +#164811 = CARTESIAN_POINT('',(82.683526,-102.160025,1.585)); +#164812 = CIRCLE('',#164813,0.150000292066); +#164813 = AXIS2_PLACEMENT_3D('',#164814,#164815,#164816); +#164814 = CARTESIAN_POINT('',(82.71279,-102.307143,1.585)); +#164815 = DIRECTION('',(0.,0.,-1.)); +#164816 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#164817 = ORIENTED_EDGE('',*,*,#164818,.T.); +#164818 = EDGE_CURVE('',#164810,#164819,#164821,.T.); +#164819 = VERTEX_POINT('',#164820); +#164820 = CARTESIAN_POINT('',(85.342054,-102.160025,1.585)); +#164821 = LINE('',#164822,#164823); +#164822 = CARTESIAN_POINT('',(82.683526,-102.160025,1.585)); +#164823 = VECTOR('',#164824,1.); +#164824 = DIRECTION('',(1.,0.,0.)); +#164825 = ORIENTED_EDGE('',*,*,#164826,.T.); +#164826 = EDGE_CURVE('',#164819,#164827,#164829,.T.); +#164827 = VERTEX_POINT('',#164828); +#164828 = CARTESIAN_POINT('',(85.342054,-102.454261,1.585)); +#164829 = CIRCLE('',#164830,0.150000292066); +#164830 = AXIS2_PLACEMENT_3D('',#164831,#164832,#164833); +#164831 = CARTESIAN_POINT('',(85.31279,-102.307143,1.585)); +#164832 = DIRECTION('',(0.,0.,-1.)); +#164833 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#164834 = ORIENTED_EDGE('',*,*,#164835,.T.); +#164835 = EDGE_CURVE('',#164827,#164836,#164838,.T.); +#164836 = VERTEX_POINT('',#164837); +#164837 = CARTESIAN_POINT('',(84.224695,-102.457143,1.585)); +#164838 = LINE('',#164839,#164840); +#164839 = CARTESIAN_POINT('',(85.342054,-102.454261,1.585)); +#164840 = VECTOR('',#164841,1.); +#164841 = DIRECTION('',(-0.999996673632,-2.579287778956E-03,0.)); +#164842 = ORIENTED_EDGE('',*,*,#164843,.T.); +#164843 = EDGE_CURVE('',#164836,#164844,#164846,.T.); +#164844 = VERTEX_POINT('',#164845); +#164845 = CARTESIAN_POINT('',(84.224695,-103.642857,1.585)); +#164846 = LINE('',#164847,#164848); +#164847 = CARTESIAN_POINT('',(84.224695,-102.457143,1.585)); +#164848 = VECTOR('',#164849,1.); +#164849 = DIRECTION('',(0.,-1.,0.)); +#164850 = ORIENTED_EDGE('',*,*,#164851,.T.); +#164851 = EDGE_CURVE('',#164844,#164852,#164854,.T.); +#164852 = VERTEX_POINT('',#164853); +#164853 = CARTESIAN_POINT('',(85.342054,-103.645739,1.585)); +#164854 = LINE('',#164855,#164856); +#164855 = CARTESIAN_POINT('',(84.224695,-103.642857,1.585)); +#164856 = VECTOR('',#164857,1.); +#164857 = DIRECTION('',(0.999996673632,-2.579287778956E-03,0.)); +#164858 = ORIENTED_EDGE('',*,*,#164859,.T.); +#164859 = EDGE_CURVE('',#164852,#164860,#164862,.T.); +#164860 = VERTEX_POINT('',#164861); +#164861 = CARTESIAN_POINT('',(85.342054,-103.939975,1.585)); +#164862 = CIRCLE('',#164863,0.150000292066); +#164863 = AXIS2_PLACEMENT_3D('',#164864,#164865,#164866); +#164864 = CARTESIAN_POINT('',(85.31279,-103.792857,1.585)); +#164865 = DIRECTION('',(0.,0.,-1.)); +#164866 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#164867 = ORIENTED_EDGE('',*,*,#164868,.T.); +#164868 = EDGE_CURVE('',#164860,#164869,#164871,.T.); +#164869 = VERTEX_POINT('',#164870); +#164870 = CARTESIAN_POINT('',(82.683526,-103.939975,1.585)); +#164871 = LINE('',#164872,#164873); +#164872 = CARTESIAN_POINT('',(85.342054,-103.939975,1.585)); +#164873 = VECTOR('',#164874,1.); +#164874 = DIRECTION('',(-1.,0.,0.)); +#164875 = ORIENTED_EDGE('',*,*,#164876,.T.); +#164876 = EDGE_CURVE('',#164869,#164877,#164879,.T.); +#164877 = VERTEX_POINT('',#164878); +#164878 = CARTESIAN_POINT('',(82.683526,-103.645739,1.585)); +#164879 = CIRCLE('',#164880,0.150000292066); +#164880 = AXIS2_PLACEMENT_3D('',#164881,#164882,#164883); +#164881 = CARTESIAN_POINT('',(82.71279,-103.792857,1.585)); +#164882 = DIRECTION('',(0.,0.,-1.)); +#164883 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#164884 = ORIENTED_EDGE('',*,*,#164885,.T.); +#164885 = EDGE_CURVE('',#164877,#164886,#164888,.T.); +#164886 = VERTEX_POINT('',#164887); +#164887 = CARTESIAN_POINT('',(83.924695,-103.642857,1.585)); +#164888 = LINE('',#164889,#164890); +#164889 = CARTESIAN_POINT('',(82.683526,-103.645739,1.585)); +#164890 = VECTOR('',#164891,1.); +#164891 = DIRECTION('',(0.999997304158,2.321998237617E-03,0.)); +#164892 = ORIENTED_EDGE('',*,*,#164893,.T.); +#164893 = EDGE_CURVE('',#164886,#164894,#164896,.T.); +#164894 = VERTEX_POINT('',#164895); +#164895 = CARTESIAN_POINT('',(83.924695,-102.457143,1.585)); +#164896 = LINE('',#164897,#164898); +#164897 = CARTESIAN_POINT('',(83.924695,-103.642857,1.585)); +#164898 = VECTOR('',#164899,1.); +#164899 = DIRECTION('',(0.,1.,0.)); +#164900 = ORIENTED_EDGE('',*,*,#164901,.T.); +#164901 = EDGE_CURVE('',#164894,#164808,#164902,.T.); +#164902 = LINE('',#164903,#164904); +#164903 = CARTESIAN_POINT('',(83.924695,-102.457143,1.585)); +#164904 = VECTOR('',#164905,1.); +#164905 = DIRECTION('',(-0.999997304158,2.321998237617E-03,0.)); +#164906 = PLANE('',#164907); +#164907 = AXIS2_PLACEMENT_3D('',#164908,#164909,#164910); +#164908 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164909 = DIRECTION('',(0.,0.,1.)); +#164910 = DIRECTION('',(1.,0.,-0.)); +#164911 = SHELL_BASED_SURFACE_MODEL('',(#164912)); +#164912 = OPEN_SHELL('',(#164913)); +#164913 = ADVANCED_FACE('',(#164914),#164950,.T.); +#164914 = FACE_BOUND('',#164915,.F.); +#164915 = EDGE_LOOP('',(#164916,#164927,#164935,#164944)); +#164916 = ORIENTED_EDGE('',*,*,#164917,.T.); +#164917 = EDGE_CURVE('',#164918,#164920,#164922,.T.); +#164918 = VERTEX_POINT('',#164919); +#164919 = CARTESIAN_POINT('',(134.754392,-103.8606,1.585)); +#164920 = VERTEX_POINT('',#164921); +#164921 = CARTESIAN_POINT('',(134.754392,-103.7406,1.585)); +#164922 = CIRCLE('',#164923,6.000000000043E-02); +#164923 = AXIS2_PLACEMENT_3D('',#164924,#164925,#164926); +#164924 = CARTESIAN_POINT('',(134.75439177441,-103.8006,1.585)); +#164925 = DIRECTION('',(0.,0.,-1.)); +#164926 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#164927 = ORIENTED_EDGE('',*,*,#164928,.T.); +#164928 = EDGE_CURVE('',#164920,#164929,#164931,.T.); +#164929 = VERTEX_POINT('',#164930); +#164930 = CARTESIAN_POINT('',(135.228908,-103.7406,1.585)); +#164931 = LINE('',#164932,#164933); +#164932 = CARTESIAN_POINT('',(134.754392,-103.7406,1.585)); +#164933 = VECTOR('',#164934,1.); +#164934 = DIRECTION('',(1.,0.,0.)); +#164935 = ORIENTED_EDGE('',*,*,#164936,.T.); +#164936 = EDGE_CURVE('',#164929,#164937,#164939,.T.); +#164937 = VERTEX_POINT('',#164938); +#164938 = CARTESIAN_POINT('',(135.228908,-103.8606,1.585)); +#164939 = CIRCLE('',#164940,6.000000000043E-02); +#164940 = AXIS2_PLACEMENT_3D('',#164941,#164942,#164943); +#164941 = CARTESIAN_POINT('',(135.22890822558,-103.8006,1.585)); +#164942 = DIRECTION('',(0.,0.,-1.)); +#164943 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#164944 = ORIENTED_EDGE('',*,*,#164945,.T.); +#164945 = EDGE_CURVE('',#164937,#164918,#164946,.T.); +#164946 = LINE('',#164947,#164948); +#164947 = CARTESIAN_POINT('',(135.228908,-103.8606,1.585)); +#164948 = VECTOR('',#164949,1.); +#164949 = DIRECTION('',(-1.,0.,0.)); +#164950 = PLANE('',#164951); +#164951 = AXIS2_PLACEMENT_3D('',#164952,#164953,#164954); +#164952 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164953 = DIRECTION('',(0.,0.,1.)); +#164954 = DIRECTION('',(1.,0.,-0.)); +#164955 = SHELL_BASED_SURFACE_MODEL('',(#164956)); +#164956 = OPEN_SHELL('',(#164957)); +#164957 = ADVANCED_FACE('',(#164958),#164994,.T.); +#164958 = FACE_BOUND('',#164959,.F.); +#164959 = EDGE_LOOP('',(#164960,#164971,#164979,#164988)); +#164960 = ORIENTED_EDGE('',*,*,#164961,.T.); +#164961 = EDGE_CURVE('',#164962,#164964,#164966,.T.); +#164962 = VERTEX_POINT('',#164963); +#164963 = CARTESIAN_POINT('',(130.730398,-103.6481,1.585)); +#164964 = VERTEX_POINT('',#164965); +#164965 = CARTESIAN_POINT('',(130.730398,-103.5281,1.585)); +#164966 = CIRCLE('',#164967,6.000000000042E-02); +#164967 = AXIS2_PLACEMENT_3D('',#164968,#164969,#164970); +#164968 = CARTESIAN_POINT('',(130.73039777441,-103.5881,1.585)); +#164969 = DIRECTION('',(0.,0.,-1.)); +#164970 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#164971 = ORIENTED_EDGE('',*,*,#164972,.T.); +#164972 = EDGE_CURVE('',#164964,#164973,#164975,.T.); +#164973 = VERTEX_POINT('',#164974); +#164974 = CARTESIAN_POINT('',(131.252902,-103.5281,1.585)); +#164975 = LINE('',#164976,#164977); +#164976 = CARTESIAN_POINT('',(130.730398,-103.5281,1.585)); +#164977 = VECTOR('',#164978,1.); +#164978 = DIRECTION('',(1.,0.,0.)); +#164979 = ORIENTED_EDGE('',*,*,#164980,.T.); +#164980 = EDGE_CURVE('',#164973,#164981,#164983,.T.); +#164981 = VERTEX_POINT('',#164982); +#164982 = CARTESIAN_POINT('',(131.252902,-103.6481,1.585)); +#164983 = CIRCLE('',#164984,6.000000000043E-02); +#164984 = AXIS2_PLACEMENT_3D('',#164985,#164986,#164987); +#164985 = CARTESIAN_POINT('',(131.25290222558,-103.5881,1.585)); +#164986 = DIRECTION('',(0.,0.,-1.)); +#164987 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#164988 = ORIENTED_EDGE('',*,*,#164989,.T.); +#164989 = EDGE_CURVE('',#164981,#164962,#164990,.T.); +#164990 = LINE('',#164991,#164992); +#164991 = CARTESIAN_POINT('',(131.252902,-103.6481,1.585)); +#164992 = VECTOR('',#164993,1.); +#164993 = DIRECTION('',(-1.,0.,0.)); +#164994 = PLANE('',#164995); +#164995 = AXIS2_PLACEMENT_3D('',#164996,#164997,#164998); +#164996 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164997 = DIRECTION('',(0.,0.,1.)); +#164998 = DIRECTION('',(1.,0.,-0.)); +#164999 = SHELL_BASED_SURFACE_MODEL('',(#165000)); +#165000 = OPEN_SHELL('',(#165001)); +#165001 = ADVANCED_FACE('',(#165002),#165145,.T.); +#165002 = FACE_BOUND('',#165003,.F.); +#165003 = EDGE_LOOP('',(#165004,#165015,#165023,#165031,#165040,#165048, + #165056,#165065,#165073,#165082,#165090,#165098,#165106,#165115, + #165123,#165131,#165139)); +#165004 = ORIENTED_EDGE('',*,*,#165005,.T.); +#165005 = EDGE_CURVE('',#165006,#165008,#165010,.T.); +#165006 = VERTEX_POINT('',#165007); +#165007 = CARTESIAN_POINT('',(200.451467,-102.853597,1.585)); +#165008 = VERTEX_POINT('',#165009); +#165009 = CARTESIAN_POINT('',(200.568135,-102.915957,1.585)); +#165010 = CIRCLE('',#165011,7.500000000003E-02); +#165011 = AXIS2_PLACEMENT_3D('',#165012,#165013,#165014); +#165012 = CARTESIAN_POINT('',(200.493135,-102.9159570655,1.585)); +#165013 = DIRECTION('',(0.,0.,-1.)); +#165014 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#165015 = ORIENTED_EDGE('',*,*,#165016,.T.); +#165016 = EDGE_CURVE('',#165008,#165017,#165019,.T.); +#165017 = VERTEX_POINT('',#165018); +#165018 = CARTESIAN_POINT('',(200.568135,-102.983814,1.585)); +#165019 = LINE('',#165020,#165021); +#165020 = CARTESIAN_POINT('',(200.568135,-102.915957,1.585)); +#165021 = VECTOR('',#165022,1.); +#165022 = DIRECTION('',(0.,-1.,0.)); +#165023 = ORIENTED_EDGE('',*,*,#165024,.T.); +#165024 = EDGE_CURVE('',#165017,#165025,#165027,.T.); +#165025 = VERTEX_POINT('',#165026); +#165026 = CARTESIAN_POINT('',(200.841101,-102.985255,1.585)); +#165027 = LINE('',#165028,#165029); +#165028 = CARTESIAN_POINT('',(200.568135,-102.983814,1.585)); +#165029 = VECTOR('',#165030,1.); +#165030 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#165031 = ORIENTED_EDGE('',*,*,#165032,.T.); +#165032 = EDGE_CURVE('',#165025,#165033,#165035,.T.); +#165033 = VERTEX_POINT('',#165034); +#165034 = CARTESIAN_POINT('',(200.826469,-103.133814,1.585)); +#165035 = CIRCLE('',#165036,7.500006711464E-02); +#165036 = AXIS2_PLACEMENT_3D('',#165037,#165038,#165039); +#165037 = CARTESIAN_POINT('',(200.82646906711,-103.0588139328,1.585)); +#165038 = DIRECTION('',(0.,0.,-1.)); +#165039 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#165040 = ORIENTED_EDGE('',*,*,#165041,.T.); +#165041 = EDGE_CURVE('',#165033,#165042,#165044,.T.); +#165042 = VERTEX_POINT('',#165043); +#165043 = CARTESIAN_POINT('',(200.568135,-103.133814,1.585)); +#165044 = LINE('',#165045,#165046); +#165045 = CARTESIAN_POINT('',(200.826469,-103.133814,1.585)); +#165046 = VECTOR('',#165047,1.); +#165047 = DIRECTION('',(-1.,0.,0.)); +#165048 = ORIENTED_EDGE('',*,*,#165049,.T.); +#165049 = EDGE_CURVE('',#165042,#165050,#165052,.T.); +#165050 = VERTEX_POINT('',#165051); +#165051 = CARTESIAN_POINT('',(200.566694,-103.549636,1.585)); +#165052 = LINE('',#165053,#165054); +#165053 = CARTESIAN_POINT('',(200.568135,-103.133814,1.585)); +#165054 = VECTOR('',#165055,1.); +#165055 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#165056 = ORIENTED_EDGE('',*,*,#165057,.T.); +#165057 = EDGE_CURVE('',#165050,#165058,#165060,.T.); +#165058 = VERTEX_POINT('',#165059); +#165059 = CARTESIAN_POINT('',(200.469417,-103.606155,1.585)); +#165060 = CIRCLE('',#165061,7.500041328202E-02); +#165061 = AXIS2_PLACEMENT_3D('',#165062,#165063,#165064); +#165062 = CARTESIAN_POINT('',(200.49313481481,-103.5350035611,1.585)); +#165063 = DIRECTION('',(0.,0.,-1.)); +#165064 = DIRECTION('',(0.980783731279,-0.195098109828,0.)); +#165065 = ORIENTED_EDGE('',*,*,#165066,.T.); +#165066 = EDGE_CURVE('',#165058,#165067,#165069,.T.); +#165067 = VERTEX_POINT('',#165068); +#165068 = CARTESIAN_POINT('',(199.741707,-103.362066,1.585)); +#165069 = LINE('',#165070,#165071); +#165070 = CARTESIAN_POINT('',(200.469417,-103.606155,1.585)); +#165071 = VECTOR('',#165072,1.); +#165072 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#165073 = ORIENTED_EDGE('',*,*,#165074,.T.); +#165074 = EDGE_CURVE('',#165067,#165075,#165077,.T.); +#165075 = VERTEX_POINT('',#165076); +#165076 = CARTESIAN_POINT('',(199.802567,-103.225758,1.585)); +#165077 = CIRCLE('',#165078,7.500001519552E-02); +#165078 = AXIS2_PLACEMENT_3D('',#165079,#165080,#165081); +#165079 = CARTESIAN_POINT('',(199.77885009996,-103.2969093241,1.585)); +#165080 = DIRECTION('',(0.,0.,-1.)); +#165081 = DIRECTION('',(-0.4952412325,-0.868755501641,-0.)); +#165082 = ORIENTED_EDGE('',*,*,#165083,.T.); +#165083 = EDGE_CURVE('',#165075,#165084,#165086,.T.); +#165084 = VERTEX_POINT('',#165085); +#165085 = CARTESIAN_POINT('',(200.418135,-103.430947,1.585)); +#165086 = LINE('',#165087,#165088); +#165087 = CARTESIAN_POINT('',(199.802567,-103.225758,1.585)); +#165088 = VECTOR('',#165089,1.); +#165089 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#165090 = ORIENTED_EDGE('',*,*,#165091,.T.); +#165091 = EDGE_CURVE('',#165084,#165092,#165094,.T.); +#165092 = VERTEX_POINT('',#165093); +#165093 = CARTESIAN_POINT('',(200.418135,-103.133814,1.585)); +#165094 = LINE('',#165095,#165096); +#165095 = CARTESIAN_POINT('',(200.418135,-103.430947,1.585)); +#165096 = VECTOR('',#165097,1.); +#165097 = DIRECTION('',(0.,1.,0.)); +#165098 = ORIENTED_EDGE('',*,*,#165099,.T.); +#165099 = EDGE_CURVE('',#165092,#165100,#165102,.T.); +#165100 = VERTEX_POINT('',#165101); +#165101 = CARTESIAN_POINT('',(200.14517,-103.132373,1.585)); +#165102 = LINE('',#165103,#165104); +#165103 = CARTESIAN_POINT('',(200.418135,-103.133814,1.585)); +#165104 = VECTOR('',#165105,1.); +#165105 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#165106 = ORIENTED_EDGE('',*,*,#165107,.T.); +#165107 = EDGE_CURVE('',#165100,#165108,#165110,.T.); +#165108 = VERTEX_POINT('',#165109); +#165109 = CARTESIAN_POINT('',(200.159802,-102.983814,1.585)); +#165110 = CIRCLE('',#165111,7.500006711464E-02); +#165111 = AXIS2_PLACEMENT_3D('',#165112,#165113,#165114); +#165112 = CARTESIAN_POINT('',(200.15980193288,-103.0588140671,1.585)); +#165113 = DIRECTION('',(0.,0.,-1.)); +#165114 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#165115 = ORIENTED_EDGE('',*,*,#165116,.T.); +#165116 = EDGE_CURVE('',#165108,#165117,#165119,.T.); +#165117 = VERTEX_POINT('',#165118); +#165118 = CARTESIAN_POINT('',(200.418135,-102.983814,1.585)); +#165119 = LINE('',#165120,#165121); +#165120 = CARTESIAN_POINT('',(200.159802,-102.983814,1.585)); +#165121 = VECTOR('',#165122,1.); +#165122 = DIRECTION('',(1.,0.,0.)); +#165123 = ORIENTED_EDGE('',*,*,#165124,.T.); +#165124 = EDGE_CURVE('',#165117,#165125,#165127,.T.); +#165125 = VERTEX_POINT('',#165126); +#165126 = CARTESIAN_POINT('',(200.419576,-102.901325,1.585)); +#165127 = LINE('',#165128,#165129); +#165128 = CARTESIAN_POINT('',(200.418135,-102.983814,1.585)); +#165129 = VECTOR('',#165130,1.); +#165130 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#165131 = ORIENTED_EDGE('',*,*,#165132,.T.); +#165132 = EDGE_CURVE('',#165125,#165133,#165135,.T.); +#165133 = VERTEX_POINT('',#165134); +#165134 = CARTESIAN_POINT('',(200.430775,-102.874289,1.585)); +#165135 = LINE('',#165136,#165137); +#165136 = CARTESIAN_POINT('',(200.419576,-102.901325,1.585)); +#165137 = VECTOR('',#165138,1.); +#165138 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#165139 = ORIENTED_EDGE('',*,*,#165140,.T.); +#165140 = EDGE_CURVE('',#165133,#165006,#165141,.T.); +#165141 = LINE('',#165142,#165143); +#165142 = CARTESIAN_POINT('',(200.430775,-102.874289,1.585)); +#165143 = VECTOR('',#165144,1.); +#165144 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#165145 = PLANE('',#165146); +#165146 = AXIS2_PLACEMENT_3D('',#165147,#165148,#165149); +#165147 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165148 = DIRECTION('',(0.,0.,1.)); +#165149 = DIRECTION('',(1.,0.,-0.)); +#165150 = SHELL_BASED_SURFACE_MODEL('',(#165151)); +#165151 = OPEN_SHELL('',(#165152)); +#165152 = ADVANCED_FACE('',(#165153),#165197,.T.); +#165153 = FACE_BOUND('',#165154,.F.); +#165154 = EDGE_LOOP('',(#165155,#165166,#165174,#165183,#165191)); +#165155 = ORIENTED_EDGE('',*,*,#165156,.T.); +#165156 = EDGE_CURVE('',#165157,#165159,#165161,.T.); +#165157 = VERTEX_POINT('',#165158); +#165158 = CARTESIAN_POINT('',(197.901217,-102.988887,1.585)); +#165159 = VERTEX_POINT('',#165160); +#165160 = CARTESIAN_POINT('',(198.01665,-103.011848,1.585)); +#165161 = CIRCLE('',#165162,6.000007318647E-02); +#165162 = AXIS2_PLACEMENT_3D('',#165163,#165164,#165165); +#165163 = CARTESIAN_POINT('',(197.95664992681,-103.0118478233,1.585)); +#165164 = DIRECTION('',(0.,0.,-1.)); +#165165 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#165166 = ORIENTED_EDGE('',*,*,#165167,.T.); +#165167 = EDGE_CURVE('',#165159,#165168,#165170,.T.); +#165168 = VERTEX_POINT('',#165169); +#165169 = CARTESIAN_POINT('',(198.01665,-103.534352,1.585)); +#165170 = LINE('',#165171,#165172); +#165171 = CARTESIAN_POINT('',(198.01665,-103.011848,1.585)); +#165172 = VECTOR('',#165173,1.); +#165173 = DIRECTION('',(0.,-1.,0.)); +#165174 = ORIENTED_EDGE('',*,*,#165175,.T.); +#165175 = EDGE_CURVE('',#165168,#165176,#165178,.T.); +#165176 = VERTEX_POINT('',#165177); +#165177 = CARTESIAN_POINT('',(197.89665,-103.534352,1.585)); +#165178 = CIRCLE('',#165179,6.000000000042E-02); +#165179 = AXIS2_PLACEMENT_3D('',#165180,#165181,#165182); +#165180 = CARTESIAN_POINT('',(197.95665,-103.5343522255,1.585)); +#165181 = DIRECTION('',(0.,0.,-1.)); +#165182 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#165183 = ORIENTED_EDGE('',*,*,#165184,.T.); +#165184 = EDGE_CURVE('',#165176,#165185,#165187,.T.); +#165185 = VERTEX_POINT('',#165186); +#165186 = CARTESIAN_POINT('',(197.89665,-103.011848,1.585)); +#165187 = LINE('',#165188,#165189); +#165188 = CARTESIAN_POINT('',(197.89665,-103.534352,1.585)); +#165189 = VECTOR('',#165190,1.); +#165190 = DIRECTION('',(0.,1.,0.)); +#165191 = ORIENTED_EDGE('',*,*,#165192,.T.); +#165192 = EDGE_CURVE('',#165185,#165157,#165193,.T.); +#165193 = LINE('',#165194,#165195); +#165194 = CARTESIAN_POINT('',(197.89665,-103.011848,1.585)); +#165195 = VECTOR('',#165196,1.); +#165196 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#165197 = PLANE('',#165198); +#165198 = AXIS2_PLACEMENT_3D('',#165199,#165200,#165201); +#165199 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165200 = DIRECTION('',(0.,0.,1.)); +#165201 = DIRECTION('',(1.,0.,-0.)); +#165202 = SHELL_BASED_SURFACE_MODEL('',(#165203)); +#165203 = OPEN_SHELL('',(#165204)); +#165204 = ADVANCED_FACE('',(#165205),#165249,.T.); +#165205 = FACE_BOUND('',#165206,.F.); +#165206 = EDGE_LOOP('',(#165207,#165218,#165226,#165235,#165243)); +#165207 = ORIENTED_EDGE('',*,*,#165208,.T.); +#165208 = EDGE_CURVE('',#165209,#165211,#165213,.T.); +#165209 = VERTEX_POINT('',#165210); +#165210 = CARTESIAN_POINT('',(199.371217,-102.988887,1.585)); +#165211 = VERTEX_POINT('',#165212); +#165212 = CARTESIAN_POINT('',(199.48665,-103.011848,1.585)); +#165213 = CIRCLE('',#165214,6.000007318647E-02); +#165214 = AXIS2_PLACEMENT_3D('',#165215,#165216,#165217); +#165215 = CARTESIAN_POINT('',(199.42664992681,-103.0118478233,1.585)); +#165216 = DIRECTION('',(0.,0.,-1.)); +#165217 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#165218 = ORIENTED_EDGE('',*,*,#165219,.T.); +#165219 = EDGE_CURVE('',#165211,#165220,#165222,.T.); +#165220 = VERTEX_POINT('',#165221); +#165221 = CARTESIAN_POINT('',(199.48665,-103.534352,1.585)); +#165222 = LINE('',#165223,#165224); +#165223 = CARTESIAN_POINT('',(199.48665,-103.011848,1.585)); +#165224 = VECTOR('',#165225,1.); +#165225 = DIRECTION('',(0.,-1.,0.)); +#165226 = ORIENTED_EDGE('',*,*,#165227,.T.); +#165227 = EDGE_CURVE('',#165220,#165228,#165230,.T.); +#165228 = VERTEX_POINT('',#165229); +#165229 = CARTESIAN_POINT('',(199.36665,-103.534352,1.585)); +#165230 = CIRCLE('',#165231,6.000000000042E-02); +#165231 = AXIS2_PLACEMENT_3D('',#165232,#165233,#165234); +#165232 = CARTESIAN_POINT('',(199.42665,-103.5343522255,1.585)); +#165233 = DIRECTION('',(0.,0.,-1.)); +#165234 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#165235 = ORIENTED_EDGE('',*,*,#165236,.T.); +#165236 = EDGE_CURVE('',#165228,#165237,#165239,.T.); +#165237 = VERTEX_POINT('',#165238); +#165238 = CARTESIAN_POINT('',(199.36665,-103.011848,1.585)); +#165239 = LINE('',#165240,#165241); +#165240 = CARTESIAN_POINT('',(199.36665,-103.534352,1.585)); +#165241 = VECTOR('',#165242,1.); +#165242 = DIRECTION('',(0.,1.,0.)); +#165243 = ORIENTED_EDGE('',*,*,#165244,.T.); +#165244 = EDGE_CURVE('',#165237,#165209,#165245,.T.); +#165245 = LINE('',#165246,#165247); +#165246 = CARTESIAN_POINT('',(199.36665,-103.011848,1.585)); +#165247 = VECTOR('',#165248,1.); +#165248 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#165249 = PLANE('',#165250); +#165250 = AXIS2_PLACEMENT_3D('',#165251,#165252,#165253); +#165251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165252 = DIRECTION('',(0.,0.,1.)); +#165253 = DIRECTION('',(1.,0.,-0.)); +#165254 = SHELL_BASED_SURFACE_MODEL('',(#165255)); +#165255 = OPEN_SHELL('',(#165256)); +#165256 = ADVANCED_FACE('',(#165257,#165368),#165420,.T.); +#165257 = FACE_BOUND('',#165258,.F.); +#165258 = EDGE_LOOP('',(#165259,#165270,#165278,#165287,#165295,#165304, + #165312,#165320,#165329,#165337,#165345,#165353,#165362)); +#165259 = ORIENTED_EDGE('',*,*,#165260,.T.); +#165260 = EDGE_CURVE('',#165261,#165263,#165265,.T.); +#165261 = VERTEX_POINT('',#165262); +#165262 = CARTESIAN_POINT('',(133.703805,-102.333287,1.585)); +#165263 = VERTEX_POINT('',#165264); +#165264 = CARTESIAN_POINT('',(133.777364,-102.272919,1.585)); +#165265 = CIRCLE('',#165266,7.500074938989E-02); +#165266 = AXIS2_PLACEMENT_3D('',#165267,#165268,#165269); +#165267 = CARTESIAN_POINT('',(133.77736446611,-102.3479197493,1.585)); +#165268 = DIRECTION('',(0.,0.,-1.)); +#165269 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#165270 = ORIENTED_EDGE('',*,*,#165271,.T.); +#165271 = EDGE_CURVE('',#165263,#165272,#165274,.T.); +#165272 = VERTEX_POINT('',#165273); +#165273 = CARTESIAN_POINT('',(134.172948,-102.27436,1.585)); +#165274 = LINE('',#165275,#165276); +#165275 = CARTESIAN_POINT('',(133.777364,-102.272919,1.585)); +#165276 = VECTOR('',#165277,1.); +#165277 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#165278 = ORIENTED_EDGE('',*,*,#165279,.T.); +#165279 = EDGE_CURVE('',#165272,#165280,#165282,.T.); +#165280 = VERTEX_POINT('',#165281); +#165281 = CARTESIAN_POINT('',(134.422351,-102.523763,1.585)); +#165282 = CIRCLE('',#165283,0.347870264855); +#165283 = AXIS2_PLACEMENT_3D('',#165284,#165285,#165286); +#165284 = CARTESIAN_POINT('',(134.08562026502,-102.6110907349,1.585)); +#165285 = DIRECTION('',(0.,0.,-1.)); +#165286 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#165287 = ORIENTED_EDGE('',*,*,#165288,.T.); +#165288 = EDGE_CURVE('',#165280,#165289,#165291,.T.); +#165289 = VERTEX_POINT('',#165290); +#165290 = CARTESIAN_POINT('',(134.421129,-102.701062,1.585)); +#165291 = LINE('',#165292,#165293); +#165292 = CARTESIAN_POINT('',(134.422351,-102.523763,1.585)); +#165293 = VECTOR('',#165294,1.); +#165294 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#165295 = ORIENTED_EDGE('',*,*,#165296,.T.); +#165296 = EDGE_CURVE('',#165289,#165297,#165299,.T.); +#165297 = VERTEX_POINT('',#165298); +#165298 = CARTESIAN_POINT('',(134.172948,-102.945287,1.585)); +#165299 = CIRCLE('',#165300,0.348632345848); +#165300 = AXIS2_PLACEMENT_3D('',#165301,#165302,#165303); +#165301 = CARTESIAN_POINT('',(134.08517919403,-102.6078834593,1.585)); +#165302 = DIRECTION('',(0.,0.,-1.)); +#165303 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#165304 = ORIENTED_EDGE('',*,*,#165305,.T.); +#165305 = EDGE_CURVE('',#165297,#165306,#165308,.T.); +#165306 = VERTEX_POINT('',#165307); +#165307 = CARTESIAN_POINT('',(134.159431,-102.946618,1.585)); +#165308 = LINE('',#165309,#165310); +#165309 = CARTESIAN_POINT('',(134.172948,-102.945287,1.585)); +#165310 = VECTOR('',#165311,1.); +#165311 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#165312 = ORIENTED_EDGE('',*,*,#165313,.T.); +#165313 = EDGE_CURVE('',#165306,#165314,#165316,.T.); +#165314 = VERTEX_POINT('',#165315); +#165315 = CARTESIAN_POINT('',(134.417445,-103.317723,1.585)); +#165316 = LINE('',#165317,#165318); +#165317 = CARTESIAN_POINT('',(134.159431,-102.946618,1.585)); +#165318 = VECTOR('',#165319,1.); +#165319 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#165320 = ORIENTED_EDGE('',*,*,#165321,.T.); +#165321 = EDGE_CURVE('',#165314,#165322,#165324,.T.); +#165322 = VERTEX_POINT('',#165323); +#165323 = CARTESIAN_POINT('',(134.28735,-103.390929,1.585)); +#165324 = CIRCLE('',#165325,7.500005951702E-02); +#165325 = AXIS2_PLACEMENT_3D('',#165326,#165327,#165328); +#165326 = CARTESIAN_POINT('',(134.34879206294,-103.3479187473,1.585)); +#165327 = DIRECTION('',(0.,0.,-1.)); +#165328 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#165329 = ORIENTED_EDGE('',*,*,#165330,.T.); +#165330 = EDGE_CURVE('',#165322,#165331,#165333,.T.); +#165331 = VERTEX_POINT('',#165332); +#165332 = CARTESIAN_POINT('',(133.97641,-102.946728,1.585)); +#165333 = LINE('',#165334,#165335); +#165334 = CARTESIAN_POINT('',(134.28735,-103.390929,1.585)); +#165335 = VECTOR('',#165336,1.); +#165336 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#165337 = ORIENTED_EDGE('',*,*,#165338,.T.); +#165338 = EDGE_CURVE('',#165331,#165339,#165341,.T.); +#165339 = VERTEX_POINT('',#165340); +#165340 = CARTESIAN_POINT('',(133.852364,-102.946728,1.585)); +#165341 = LINE('',#165342,#165343); +#165342 = CARTESIAN_POINT('',(133.97641,-102.946728,1.585)); +#165343 = VECTOR('',#165344,1.); +#165344 = DIRECTION('',(-1.,0.,0.)); +#165345 = ORIENTED_EDGE('',*,*,#165346,.T.); +#165346 = EDGE_CURVE('',#165339,#165347,#165349,.T.); +#165347 = VERTEX_POINT('',#165348); +#165348 = CARTESIAN_POINT('',(133.850923,-103.362551,1.585)); +#165349 = LINE('',#165350,#165351); +#165350 = CARTESIAN_POINT('',(133.852364,-102.946728,1.585)); +#165351 = VECTOR('',#165352,1.); +#165352 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#165353 = ORIENTED_EDGE('',*,*,#165354,.T.); +#165354 = EDGE_CURVE('',#165347,#165355,#165357,.T.); +#165355 = VERTEX_POINT('',#165356); +#165356 = CARTESIAN_POINT('',(133.702364,-103.347919,1.585)); +#165357 = CIRCLE('',#165358,7.500006711464E-02); +#165358 = AXIS2_PLACEMENT_3D('',#165359,#165360,#165361); +#165359 = CARTESIAN_POINT('',(133.77736406711,-103.3479190671,1.585)); +#165360 = DIRECTION('',(-0.,0.,-1.)); +#165361 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#165362 = ORIENTED_EDGE('',*,*,#165363,.T.); +#165363 = EDGE_CURVE('',#165355,#165261,#165364,.T.); +#165364 = LINE('',#165365,#165366); +#165365 = CARTESIAN_POINT('',(133.702364,-103.347919,1.585)); +#165366 = VECTOR('',#165367,1.); +#165367 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#165368 = FACE_BOUND('',#165369,.F.); +#165369 = EDGE_LOOP('',(#165370,#165381,#165389,#165397,#165405,#165414) + ); +#165370 = ORIENTED_EDGE('',*,*,#165371,.T.); +#165371 = EDGE_CURVE('',#165372,#165374,#165376,.T.); +#165372 = VERTEX_POINT('',#165373); +#165373 = CARTESIAN_POINT('',(134.273792,-102.5561,1.585)); +#165374 = VERTEX_POINT('',#165375); +#165375 = CARTESIAN_POINT('',(134.140611,-102.422919,1.585)); +#165376 = CIRCLE('',#165377,0.18686440374); +#165377 = AXIS2_PLACEMENT_3D('',#165378,#165379,#165380); +#165378 = CARTESIAN_POINT('',(134.093075,-102.603636,1.585)); +#165379 = DIRECTION('',(0.,0.,1.)); +#165380 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#165381 = ORIENTED_EDGE('',*,*,#165382,.T.); +#165382 = EDGE_CURVE('',#165374,#165383,#165385,.T.); +#165383 = VERTEX_POINT('',#165384); +#165384 = CARTESIAN_POINT('',(133.852364,-102.422919,1.585)); +#165385 = LINE('',#165386,#165387); +#165386 = CARTESIAN_POINT('',(134.140611,-102.422919,1.585)); +#165387 = VECTOR('',#165388,1.); +#165388 = DIRECTION('',(-1.,0.,0.)); +#165389 = ORIENTED_EDGE('',*,*,#165390,.T.); +#165390 = EDGE_CURVE('',#165383,#165391,#165393,.T.); +#165391 = VERTEX_POINT('',#165392); +#165392 = CARTESIAN_POINT('',(133.852364,-102.796728,1.585)); +#165393 = LINE('',#165394,#165395); +#165394 = CARTESIAN_POINT('',(133.852364,-102.422919,1.585)); +#165395 = VECTOR('',#165396,1.); +#165396 = DIRECTION('',(0.,-1.,0.)); +#165397 = ORIENTED_EDGE('',*,*,#165398,.T.); +#165398 = EDGE_CURVE('',#165391,#165399,#165401,.T.); +#165399 = VERTEX_POINT('',#165400); +#165400 = CARTESIAN_POINT('',(134.140611,-102.796728,1.585)); +#165401 = LINE('',#165402,#165403); +#165402 = CARTESIAN_POINT('',(133.852364,-102.796728,1.585)); +#165403 = VECTOR('',#165404,1.); +#165404 = DIRECTION('',(1.,0.,0.)); +#165405 = ORIENTED_EDGE('',*,*,#165406,.T.); +#165406 = EDGE_CURVE('',#165399,#165407,#165409,.T.); +#165407 = VERTEX_POINT('',#165408); +#165408 = CARTESIAN_POINT('',(134.273792,-102.663547,1.585)); +#165409 = CIRCLE('',#165410,0.18686440374); +#165410 = AXIS2_PLACEMENT_3D('',#165411,#165412,#165413); +#165411 = CARTESIAN_POINT('',(134.093075,-102.616011,1.585)); +#165412 = DIRECTION('',(0.,0.,1.)); +#165413 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#165414 = ORIENTED_EDGE('',*,*,#165415,.T.); +#165415 = EDGE_CURVE('',#165407,#165372,#165416,.T.); +#165416 = LINE('',#165417,#165418); +#165417 = CARTESIAN_POINT('',(134.273792,-102.663547,1.585)); +#165418 = VECTOR('',#165419,1.); +#165419 = DIRECTION('',(0.,1.,0.)); +#165420 = PLANE('',#165421); +#165421 = AXIS2_PLACEMENT_3D('',#165422,#165423,#165424); +#165422 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165423 = DIRECTION('',(0.,0.,1.)); +#165424 = DIRECTION('',(1.,0.,-0.)); +#165425 = SHELL_BASED_SURFACE_MODEL('',(#165426)); +#165426 = OPEN_SHELL('',(#165427)); +#165427 = ADVANCED_FACE('',(#165428),#165623,.T.); +#165428 = FACE_BOUND('',#165429,.F.); +#165429 = EDGE_LOOP('',(#165430,#165441,#165449,#165458,#165466,#165474, + #165482,#165490,#165499,#165507,#165516,#165524,#165532,#165540, + #165549,#165557,#165566,#165574,#165583,#165591,#165600,#165608, + #165617)); +#165430 = ORIENTED_EDGE('',*,*,#165431,.T.); +#165431 = EDGE_CURVE('',#165432,#165434,#165436,.T.); +#165432 = VERTEX_POINT('',#165433); +#165433 = CARTESIAN_POINT('',(134.705626,-102.32604,1.585)); +#165434 = VERTEX_POINT('',#165435); +#165435 = CARTESIAN_POINT('',(134.777364,-102.272919,1.585)); +#165436 = CIRCLE('',#165437,7.50033610077E-02); +#165437 = AXIS2_PLACEMENT_3D('',#165438,#165439,#165440); +#165438 = CARTESIAN_POINT('',(134.7773662707,-102.3479223609,1.585)); +#165439 = DIRECTION('',(0.,0.,-1.)); +#165440 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#165441 = ORIENTED_EDGE('',*,*,#165442,.T.); +#165442 = EDGE_CURVE('',#165434,#165443,#165445,.T.); +#165443 = VERTEX_POINT('',#165444); +#165444 = CARTESIAN_POINT('',(135.268186,-102.27436,1.585)); +#165445 = LINE('',#165446,#165447); +#165446 = CARTESIAN_POINT('',(134.777364,-102.272919,1.585)); +#165447 = VECTOR('',#165448,1.); +#165448 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#165449 = ORIENTED_EDGE('',*,*,#165450,.T.); +#165450 = EDGE_CURVE('',#165443,#165451,#165453,.T.); +#165451 = VERTEX_POINT('',#165452); +#165452 = CARTESIAN_POINT('',(135.253554,-102.422919,1.585)); +#165453 = CIRCLE('',#165454,7.500006711463E-02); +#165454 = AXIS2_PLACEMENT_3D('',#165455,#165456,#165457); +#165455 = CARTESIAN_POINT('',(135.25355406711,-102.3479189328,1.585)); +#165456 = DIRECTION('',(0.,0.,-1.)); +#165457 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#165458 = ORIENTED_EDGE('',*,*,#165459,.T.); +#165459 = EDGE_CURVE('',#165451,#165460,#165462,.T.); +#165460 = VERTEX_POINT('',#165461); +#165461 = CARTESIAN_POINT('',(134.845238,-102.422919,1.585)); +#165462 = LINE('',#165463,#165464); +#165463 = CARTESIAN_POINT('',(135.253554,-102.422919,1.585)); +#165464 = VECTOR('',#165465,1.); +#165465 = DIRECTION('',(-1.,0.,0.)); +#165466 = ORIENTED_EDGE('',*,*,#165467,.T.); +#165467 = EDGE_CURVE('',#165460,#165468,#165470,.T.); +#165468 = VERTEX_POINT('',#165469); +#165469 = CARTESIAN_POINT('',(134.820419,-102.671109,1.585)); +#165470 = LINE('',#165471,#165472); +#165471 = CARTESIAN_POINT('',(134.845238,-102.422919,1.585)); +#165472 = VECTOR('',#165473,1.); +#165473 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#165474 = ORIENTED_EDGE('',*,*,#165475,.T.); +#165475 = EDGE_CURVE('',#165468,#165476,#165478,.T.); +#165476 = VERTEX_POINT('',#165477); +#165477 = CARTESIAN_POINT('',(134.85797,-102.655312,1.585)); +#165478 = LINE('',#165479,#165480); +#165479 = CARTESIAN_POINT('',(134.820419,-102.671109,1.585)); +#165480 = VECTOR('',#165481,1.); +#165481 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#165482 = ORIENTED_EDGE('',*,*,#165483,.T.); +#165483 = EDGE_CURVE('',#165476,#165484,#165486,.T.); +#165484 = VERTEX_POINT('',#165485); +#165485 = CARTESIAN_POINT('',(135.130506,-102.656534,1.585)); +#165486 = LINE('',#165487,#165488); +#165487 = CARTESIAN_POINT('',(134.85797,-102.655312,1.585)); +#165488 = VECTOR('',#165489,1.); +#165489 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#165490 = ORIENTED_EDGE('',*,*,#165491,.T.); +#165491 = EDGE_CURVE('',#165484,#165492,#165494,.T.); +#165492 = VERTEX_POINT('',#165493); +#165493 = CARTESIAN_POINT('',(135.374732,-102.904715,1.585)); +#165494 = CIRCLE('',#165495,0.348625649748); +#165495 = AXIS2_PLACEMENT_3D('',#165496,#165497,#165498); +#165496 = CARTESIAN_POINT('',(135.03733404586,-102.9924786838,1.585)); +#165497 = DIRECTION('',(0.,0.,-1.)); +#165498 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#165499 = ORIENTED_EDGE('',*,*,#165500,.T.); +#165500 = EDGE_CURVE('',#165492,#165501,#165503,.T.); +#165501 = VERTEX_POINT('',#165502); +#165502 = CARTESIAN_POINT('',(135.37351,-103.177252,1.585)); +#165503 = LINE('',#165504,#165505); +#165504 = CARTESIAN_POINT('',(135.374732,-102.904715,1.585)); +#165505 = VECTOR('',#165506,1.); +#165506 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#165507 = ORIENTED_EDGE('',*,*,#165508,.T.); +#165508 = EDGE_CURVE('',#165501,#165509,#165511,.T.); +#165509 = VERTEX_POINT('',#165510); +#165510 = CARTESIAN_POINT('',(135.125329,-103.421478,1.585)); +#165511 = CIRCLE('',#165512,0.348635327447); +#165512 = AXIS2_PLACEMENT_3D('',#165513,#165514,#165515); +#165513 = CARTESIAN_POINT('',(135.03755748129,-103.0840720841,1.585)); +#165514 = DIRECTION('',(0.,0.,-1.)); +#165515 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#165516 = ORIENTED_EDGE('',*,*,#165517,.T.); +#165517 = EDGE_CURVE('',#165509,#165518,#165520,.T.); +#165518 = VERTEX_POINT('',#165519); +#165519 = CARTESIAN_POINT('',(134.852792,-103.420256,1.585)); +#165520 = LINE('',#165521,#165522); +#165521 = CARTESIAN_POINT('',(135.125329,-103.421478,1.585)); +#165522 = VECTOR('',#165523,1.); +#165523 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#165524 = ORIENTED_EDGE('',*,*,#165525,.T.); +#165525 = EDGE_CURVE('',#165518,#165526,#165528,.T.); +#165526 = VERTEX_POINT('',#165527); +#165527 = CARTESIAN_POINT('',(134.730079,-103.35805,1.585)); +#165528 = LINE('',#165529,#165530); +#165529 = CARTESIAN_POINT('',(134.852792,-103.420256,1.585)); +#165530 = VECTOR('',#165531,1.); +#165531 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#165532 = ORIENTED_EDGE('',*,*,#165533,.T.); +#165533 = EDGE_CURVE('',#165526,#165534,#165536,.T.); +#165534 = VERTEX_POINT('',#165535); +#165535 = CARTESIAN_POINT('',(134.667384,-103.294347,1.585)); +#165536 = LINE('',#165537,#165538); +#165537 = CARTESIAN_POINT('',(134.730079,-103.35805,1.585)); +#165538 = VECTOR('',#165539,1.); +#165539 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#165540 = ORIENTED_EDGE('',*,*,#165541,.T.); +#165541 = EDGE_CURVE('',#165534,#165542,#165544,.T.); +#165542 = VERTEX_POINT('',#165543); +#165543 = CARTESIAN_POINT('',(134.782779,-103.199648,1.585)); +#165544 = CIRCLE('',#165545,7.50001266804E-02); +#165545 = AXIS2_PLACEMENT_3D('',#165546,#165547,#165548); +#165546 = CARTESIAN_POINT('',(134.72974505199,-103.2526802483,1.585)); +#165547 = DIRECTION('',(0.,0.,-1.)); +#165548 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#165549 = ORIENTED_EDGE('',*,*,#165550,.T.); +#165550 = EDGE_CURVE('',#165542,#165551,#165553,.T.); +#165551 = VERTEX_POINT('',#165552); +#165552 = CARTESIAN_POINT('',(134.821791,-103.238661,1.585)); +#165553 = LINE('',#165554,#165555); +#165554 = CARTESIAN_POINT('',(134.782779,-103.199648,1.585)); +#165555 = VECTOR('',#165556,1.); +#165556 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#165557 = ORIENTED_EDGE('',*,*,#165558,.T.); +#165558 = EDGE_CURVE('',#165551,#165559,#165561,.T.); +#165559 = VERTEX_POINT('',#165560); +#165560 = CARTESIAN_POINT('',(135.161507,-103.238661,1.585)); +#165561 = CIRCLE('',#165562,0.305620374329); +#165562 = AXIS2_PLACEMENT_3D('',#165563,#165564,#165565); +#165563 = CARTESIAN_POINT('',(134.991649,-102.98459,1.585)); +#165564 = DIRECTION('',(0.,0.,1.)); +#165565 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#165566 = ORIENTED_EDGE('',*,*,#165567,.T.); +#165567 = EDGE_CURVE('',#165559,#165568,#165570,.T.); +#165568 = VERTEX_POINT('',#165569); +#165569 = CARTESIAN_POINT('',(135.191914,-103.208253,1.585)); +#165570 = LINE('',#165571,#165572); +#165571 = CARTESIAN_POINT('',(135.161507,-103.238661,1.585)); +#165572 = VECTOR('',#165573,1.); +#165573 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#165574 = ORIENTED_EDGE('',*,*,#165575,.T.); +#165575 = EDGE_CURVE('',#165568,#165576,#165578,.T.); +#165576 = VERTEX_POINT('',#165577); +#165577 = CARTESIAN_POINT('',(135.191915,-102.868536,1.585)); +#165578 = CIRCLE('',#165579,0.305616146029); +#165579 = AXIS2_PLACEMENT_3D('',#165580,#165581,#165582); +#165580 = CARTESIAN_POINT('',(134.93784892049,-103.0383937521,1.585)); +#165581 = DIRECTION('',(0.,-0.,1.)); +#165582 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#165583 = ORIENTED_EDGE('',*,*,#165584,.T.); +#165584 = EDGE_CURVE('',#165576,#165585,#165587,.T.); +#165585 = VERTEX_POINT('',#165586); +#165586 = CARTESIAN_POINT('',(135.161508,-102.838129,1.585)); +#165587 = LINE('',#165588,#165589); +#165588 = CARTESIAN_POINT('',(135.191915,-102.868536,1.585)); +#165589 = VECTOR('',#165590,1.); +#165590 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#165591 = ORIENTED_EDGE('',*,*,#165592,.T.); +#165592 = EDGE_CURVE('',#165585,#165593,#165595,.T.); +#165593 = VERTEX_POINT('',#165594); +#165594 = CARTESIAN_POINT('',(134.821791,-102.838129,1.585)); +#165595 = CIRCLE('',#165596,0.305621483548); +#165596 = AXIS2_PLACEMENT_3D('',#165597,#165598,#165599); +#165597 = CARTESIAN_POINT('',(134.9916495,-103.092201,1.585)); +#165598 = DIRECTION('',(0.,0.,1.)); +#165599 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#165600 = ORIENTED_EDGE('',*,*,#165601,.T.); +#165601 = EDGE_CURVE('',#165593,#165602,#165604,.T.); +#165602 = VERTEX_POINT('',#165603); +#165603 = CARTESIAN_POINT('',(134.765001,-102.890306,1.585)); +#165604 = LINE('',#165605,#165606); +#165605 = CARTESIAN_POINT('',(134.821791,-102.838129,1.585)); +#165606 = VECTOR('',#165607,1.); +#165607 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#165608 = ORIENTED_EDGE('',*,*,#165609,.T.); +#165609 = EDGE_CURVE('',#165602,#165610,#165612,.T.); +#165610 = VERTEX_POINT('',#165611); +#165611 = CARTESIAN_POINT('',(134.655095,-102.831349,1.585)); +#165612 = CIRCLE('',#165613,7.500024172472E-02); +#165613 = AXIS2_PLACEMENT_3D('',#165614,#165615,#165616); +#165614 = CARTESIAN_POINT('',(134.72974497002,-102.8241089561,1.585)); +#165615 = DIRECTION('',(-0.,0.,-1.)); +#165616 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#165617 = ORIENTED_EDGE('',*,*,#165618,.T.); +#165618 = EDGE_CURVE('',#165610,#165432,#165619,.T.); +#165619 = LINE('',#165620,#165621); +#165620 = CARTESIAN_POINT('',(134.655095,-102.831349,1.585)); +#165621 = VECTOR('',#165622,1.); +#165622 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#165623 = PLANE('',#165624); +#165624 = AXIS2_PLACEMENT_3D('',#165625,#165626,#165627); +#165625 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165626 = DIRECTION('',(0.,0.,1.)); +#165627 = DIRECTION('',(1.,0.,-0.)); +#165628 = SHELL_BASED_SURFACE_MODEL('',(#165629)); +#165629 = OPEN_SHELL('',(#165630)); +#165630 = ADVANCED_FACE('',(#165631,#165781,#165851),#165936,.T.); +#165631 = FACE_BOUND('',#165632,.F.); +#165632 = EDGE_LOOP('',(#165633,#165644,#165652,#165660,#165668,#165676, + #165684,#165692,#165701,#165709,#165718,#165726,#165735,#165743, + #165751,#165759,#165767,#165775)); +#165633 = ORIENTED_EDGE('',*,*,#165634,.T.); +#165634 = EDGE_CURVE('',#165635,#165637,#165639,.T.); +#165635 = VERTEX_POINT('',#165636); +#165636 = CARTESIAN_POINT('',(135.737523,-102.33242,1.585)); +#165637 = VERTEX_POINT('',#165638); +#165638 = CARTESIAN_POINT('',(136.205599,-102.337786,1.585)); +#165639 = CIRCLE('',#165640,0.397581403297); +#165640 = AXIS2_PLACEMENT_3D('',#165641,#165642,#165643); +#165641 = CARTESIAN_POINT('',(135.96787687062,-102.6564694816,1.585)); +#165642 = DIRECTION('',(0.,0.,-1.)); +#165643 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#165644 = ORIENTED_EDGE('',*,*,#165645,.T.); +#165645 = EDGE_CURVE('',#165637,#165646,#165648,.T.); +#165646 = VERTEX_POINT('',#165647); +#165647 = CARTESIAN_POINT('',(136.269052,-102.403316,1.585)); +#165648 = LINE('',#165649,#165650); +#165649 = CARTESIAN_POINT('',(136.205599,-102.337786,1.585)); +#165650 = VECTOR('',#165651,1.); +#165651 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#165652 = ORIENTED_EDGE('',*,*,#165653,.T.); +#165653 = EDGE_CURVE('',#165646,#165654,#165656,.T.); +#165654 = VERTEX_POINT('',#165655); +#165655 = CARTESIAN_POINT('',(136.327113,-102.523763,1.585)); +#165656 = LINE('',#165657,#165658); +#165657 = CARTESIAN_POINT('',(136.269052,-102.403316,1.585)); +#165658 = VECTOR('',#165659,1.); +#165659 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#165660 = ORIENTED_EDGE('',*,*,#165661,.T.); +#165661 = EDGE_CURVE('',#165654,#165662,#165664,.T.); +#165662 = VERTEX_POINT('',#165663); +#165663 = CARTESIAN_POINT('',(136.325891,-102.605824,1.585)); +#165664 = LINE('',#165665,#165666); +#165665 = CARTESIAN_POINT('',(136.327113,-102.523763,1.585)); +#165666 = VECTOR('',#165667,1.); +#165667 = DIRECTION('',(-1.48897104794E-02,-0.999889142116,0.)); +#165668 = ORIENTED_EDGE('',*,*,#165669,.T.); +#165669 = EDGE_CURVE('',#165662,#165670,#165672,.T.); +#165670 = VERTEX_POINT('',#165671); +#165671 = CARTESIAN_POINT('',(136.263686,-102.728535,1.585)); +#165672 = LINE('',#165673,#165674); +#165673 = CARTESIAN_POINT('',(136.325891,-102.605824,1.585)); +#165674 = VECTOR('',#165675,1.); +#165675 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#165676 = ORIENTED_EDGE('',*,*,#165677,.T.); +#165677 = EDGE_CURVE('',#165670,#165678,#165680,.T.); +#165678 = VERTEX_POINT('',#165679); +#165679 = CARTESIAN_POINT('',(136.216763,-102.77649,1.585)); +#165680 = LINE('',#165681,#165682); +#165681 = CARTESIAN_POINT('',(136.263686,-102.728535,1.585)); +#165682 = VECTOR('',#165683,1.); +#165683 = DIRECTION('',(-0.699374120429,-0.714755790234,0.)); +#165684 = ORIENTED_EDGE('',*,*,#165685,.T.); +#165685 = EDGE_CURVE('',#165678,#165686,#165688,.T.); +#165686 = VERTEX_POINT('',#165687); +#165687 = CARTESIAN_POINT('',(136.273017,-102.838187,1.585)); +#165688 = LINE('',#165689,#165690); +#165689 = CARTESIAN_POINT('',(136.216763,-102.77649,1.585)); +#165690 = VECTOR('',#165691,1.); +#165691 = DIRECTION('',(0.673759436039,-0.738950757729,0.)); +#165692 = ORIENTED_EDGE('',*,*,#165693,.T.); +#165693 = EDGE_CURVE('',#165686,#165694,#165696,.T.); +#165694 = VERTEX_POINT('',#165695); +#165695 = CARTESIAN_POINT('',(136.263686,-103.299963,1.585)); +#165696 = CIRCLE('',#165697,0.395774657874); +#165697 = AXIS2_PLACEMENT_3D('',#165698,#165699,#165700); +#165698 = CARTESIAN_POINT('',(135.94700374421,-103.0625816007,1.585)); +#165699 = DIRECTION('',(0.,0.,-1.)); +#165700 = DIRECTION('',(0.823734540094,0.566975667428,0.)); +#165701 = ORIENTED_EDGE('',*,*,#165702,.T.); +#165702 = EDGE_CURVE('',#165694,#165703,#165705,.T.); +#165703 = VERTEX_POINT('',#165704); +#165704 = CARTESIAN_POINT('',(136.198156,-103.363417,1.585)); +#165705 = LINE('',#165706,#165707); +#165706 = CARTESIAN_POINT('',(136.263686,-103.299963,1.585)); +#165707 = VECTOR('',#165708,1.); +#165708 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#165709 = ORIENTED_EDGE('',*,*,#165710,.T.); +#165710 = EDGE_CURVE('',#165703,#165711,#165713,.T.); +#165711 = VERTEX_POINT('',#165712); +#165712 = CARTESIAN_POINT('',(135.730079,-103.35805,1.585)); +#165713 = CIRCLE('',#165714,0.397464151365); +#165714 = AXIS2_PLACEMENT_3D('',#165715,#165716,#165717); +#165715 = CARTESIAN_POINT('',(135.96780064058,-103.0395124461,1.585)); +#165716 = DIRECTION('',(-0.,0.,-1.)); +#165717 = DIRECTION('',(0.579562606145,-0.814927717996,-0.)); +#165718 = ORIENTED_EDGE('',*,*,#165719,.T.); +#165719 = EDGE_CURVE('',#165711,#165720,#165722,.T.); +#165720 = VERTEX_POINT('',#165721); +#165721 = CARTESIAN_POINT('',(135.666626,-103.292517,1.585)); +#165722 = LINE('',#165723,#165724); +#165723 = CARTESIAN_POINT('',(135.730079,-103.35805,1.585)); +#165724 = VECTOR('',#165725,1.); +#165725 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#165726 = ORIENTED_EDGE('',*,*,#165727,.T.); +#165727 = EDGE_CURVE('',#165720,#165728,#165730,.T.); +#165728 = VERTEX_POINT('',#165729); +#165729 = CARTESIAN_POINT('',(135.671993,-102.824444,1.585)); +#165730 = CIRCLE('',#165731,0.397465551155); +#165731 = AXIS2_PLACEMENT_3D('',#165732,#165733,#165734); +#165732 = CARTESIAN_POINT('',(135.99053374227,-103.0621637086,1.585)); +#165733 = DIRECTION('',(0.,0.,-1.)); +#165734 = DIRECTION('',(-0.814932869863,-0.579555361995,-0.)); +#165735 = ORIENTED_EDGE('',*,*,#165736,.T.); +#165736 = EDGE_CURVE('',#165728,#165737,#165739,.T.); +#165737 = VERTEX_POINT('',#165738); +#165738 = CARTESIAN_POINT('',(135.718917,-102.77649,1.585)); +#165739 = LINE('',#165740,#165741); +#165740 = CARTESIAN_POINT('',(135.671993,-102.824444,1.585)); +#165741 = VECTOR('',#165742,1.); +#165742 = DIRECTION('',(0.699389185334,0.714741049218,0.)); +#165743 = ORIENTED_EDGE('',*,*,#165744,.T.); +#165744 = EDGE_CURVE('',#165737,#165745,#165747,.T.); +#165745 = VERTEX_POINT('',#165746); +#165746 = CARTESIAN_POINT('',(135.662663,-102.714793,1.585)); +#165747 = LINE('',#165748,#165749); +#165748 = CARTESIAN_POINT('',(135.718917,-102.77649,1.585)); +#165749 = VECTOR('',#165750,1.); +#165750 = DIRECTION('',(-0.673759436039,0.738950757729,0.)); +#165751 = ORIENTED_EDGE('',*,*,#165752,.T.); +#165752 = EDGE_CURVE('',#165745,#165753,#165755,.T.); +#165753 = VERTEX_POINT('',#165754); +#165754 = CARTESIAN_POINT('',(135.608567,-102.600646,1.585)); +#165755 = LINE('',#165756,#165757); +#165756 = CARTESIAN_POINT('',(135.662663,-102.714793,1.585)); +#165757 = VECTOR('',#165758,1.); +#165758 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#165759 = ORIENTED_EDGE('',*,*,#165760,.T.); +#165760 = EDGE_CURVE('',#165753,#165761,#165763,.T.); +#165761 = VERTEX_POINT('',#165762); +#165762 = CARTESIAN_POINT('',(135.609789,-102.518586,1.585)); +#165763 = LINE('',#165764,#165765); +#165764 = CARTESIAN_POINT('',(135.608567,-102.600646,1.585)); +#165765 = VECTOR('',#165766,1.); +#165766 = DIRECTION('',(1.488989188859E-02,0.999889139415,0.)); +#165767 = ORIENTED_EDGE('',*,*,#165768,.T.); +#165768 = EDGE_CURVE('',#165761,#165769,#165771,.T.); +#165769 = VERTEX_POINT('',#165770); +#165770 = CARTESIAN_POINT('',(135.671993,-102.395873,1.585)); +#165771 = LINE('',#165772,#165773); +#165772 = CARTESIAN_POINT('',(135.609789,-102.518586,1.585)); +#165773 = VECTOR('',#165774,1.); +#165774 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#165775 = ORIENTED_EDGE('',*,*,#165776,.T.); +#165776 = EDGE_CURVE('',#165769,#165635,#165777,.T.); +#165777 = LINE('',#165778,#165779); +#165778 = CARTESIAN_POINT('',(135.671993,-102.395873,1.585)); +#165779 = VECTOR('',#165780,1.); +#165780 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#165781 = FACE_BOUND('',#165782,.F.); +#165782 = EDGE_LOOP('',(#165783,#165794,#165802,#165811,#165819,#165828, + #165836,#165845)); +#165783 = ORIENTED_EDGE('',*,*,#165784,.T.); +#165784 = EDGE_CURVE('',#165785,#165787,#165789,.T.); +#165785 = VERTEX_POINT('',#165786); +#165786 = CARTESIAN_POINT('',(136.113889,-102.885748,1.585)); +#165787 = VERTEX_POINT('',#165788); +#165788 = CARTESIAN_POINT('',(135.821791,-102.885748,1.585)); +#165789 = CIRCLE('',#165790,0.252889603602); +#165790 = AXIS2_PLACEMENT_3D('',#165791,#165792,#165793); +#165791 = CARTESIAN_POINT('',(135.96784,-103.092201,1.585)); +#165792 = DIRECTION('',(0.,0.,1.)); +#165793 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#165794 = ORIENTED_EDGE('',*,*,#165795,.T.); +#165795 = EDGE_CURVE('',#165787,#165796,#165798,.T.); +#165796 = VERTEX_POINT('',#165797); +#165797 = CARTESIAN_POINT('',(135.791384,-102.916155,1.585)); +#165798 = LINE('',#165799,#165800); +#165799 = CARTESIAN_POINT('',(135.821791,-102.885748,1.585)); +#165800 = VECTOR('',#165801,1.); +#165801 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#165802 = ORIENTED_EDGE('',*,*,#165803,.T.); +#165803 = EDGE_CURVE('',#165796,#165804,#165806,.T.); +#165804 = VERTEX_POINT('',#165805); +#165805 = CARTESIAN_POINT('',(135.791384,-103.208253,1.585)); +#165806 = CIRCLE('',#165807,0.252889603602); +#165807 = AXIS2_PLACEMENT_3D('',#165808,#165809,#165810); +#165808 = CARTESIAN_POINT('',(135.997837,-103.062204,1.585)); +#165809 = DIRECTION('',(0.,0.,1.)); +#165810 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#165811 = ORIENTED_EDGE('',*,*,#165812,.T.); +#165812 = EDGE_CURVE('',#165804,#165813,#165815,.T.); +#165813 = VERTEX_POINT('',#165814); +#165814 = CARTESIAN_POINT('',(135.821791,-103.238661,1.585)); +#165815 = LINE('',#165816,#165817); +#165816 = CARTESIAN_POINT('',(135.791384,-103.208253,1.585)); +#165817 = VECTOR('',#165818,1.); +#165818 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#165819 = ORIENTED_EDGE('',*,*,#165820,.T.); +#165820 = EDGE_CURVE('',#165813,#165821,#165823,.T.); +#165821 = VERTEX_POINT('',#165822); +#165822 = CARTESIAN_POINT('',(136.113888,-103.238661,1.585)); +#165823 = CIRCLE('',#165824,0.252888498466); +#165824 = AXIS2_PLACEMENT_3D('',#165825,#165826,#165827); +#165825 = CARTESIAN_POINT('',(135.9678395,-103.032209,1.585)); +#165826 = DIRECTION('',(0.,0.,1.)); +#165827 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#165828 = ORIENTED_EDGE('',*,*,#165829,.T.); +#165829 = EDGE_CURVE('',#165821,#165830,#165832,.T.); +#165830 = VERTEX_POINT('',#165831); +#165831 = CARTESIAN_POINT('',(136.144295,-103.208253,1.585)); +#165832 = LINE('',#165833,#165834); +#165833 = CARTESIAN_POINT('',(136.113888,-103.238661,1.585)); +#165834 = VECTOR('',#165835,1.); +#165835 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#165836 = ORIENTED_EDGE('',*,*,#165837,.T.); +#165837 = EDGE_CURVE('',#165830,#165838,#165840,.T.); +#165838 = VERTEX_POINT('',#165839); +#165839 = CARTESIAN_POINT('',(136.144296,-102.916155,1.585)); +#165840 = CIRCLE('',#165841,0.252885429722); +#165841 = AXIS2_PLACEMENT_3D('',#165842,#165843,#165844); +#165842 = CARTESIAN_POINT('',(135.93784761271,-103.0622032932,1.585)); +#165843 = DIRECTION('',(0.,-0.,1.)); +#165844 = DIRECTION('',(0.816367267623,-0.577533102387,-0.)); +#165845 = ORIENTED_EDGE('',*,*,#165846,.T.); +#165846 = EDGE_CURVE('',#165838,#165785,#165847,.T.); +#165847 = LINE('',#165848,#165849); +#165848 = CARTESIAN_POINT('',(136.144296,-102.916155,1.585)); +#165849 = VECTOR('',#165850,1.); +#165850 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165851 = FACE_BOUND('',#165852,.F.); +#165852 = EDGE_LOOP('',(#165853,#165864,#165872,#165880,#165888,#165897, + #165905,#165914,#165922,#165930)); +#165853 = ORIENTED_EDGE('',*,*,#165854,.T.); +#165854 = EDGE_CURVE('',#165855,#165857,#165859,.T.); +#165855 = VERTEX_POINT('',#165856); +#165856 = CARTESIAN_POINT('',(136.113889,-102.457177,1.585)); +#165857 = VERTEX_POINT('',#165858); +#165858 = CARTESIAN_POINT('',(135.821791,-102.457177,1.585)); +#165859 = CIRCLE('',#165860,0.252889603602); +#165860 = AXIS2_PLACEMENT_3D('',#165861,#165862,#165863); +#165861 = CARTESIAN_POINT('',(135.96784,-102.66363,1.585)); +#165862 = DIRECTION('',(0.,0.,1.)); +#165863 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#165864 = ORIENTED_EDGE('',*,*,#165865,.T.); +#165865 = EDGE_CURVE('',#165857,#165866,#165868,.T.); +#165866 = VERTEX_POINT('',#165867); +#165867 = CARTESIAN_POINT('',(135.791384,-102.487584,1.585)); +#165868 = LINE('',#165869,#165870); +#165869 = CARTESIAN_POINT('',(135.821791,-102.457177,1.585)); +#165870 = VECTOR('',#165871,1.); +#165871 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#165872 = ORIENTED_EDGE('',*,*,#165873,.T.); +#165873 = EDGE_CURVE('',#165866,#165874,#165876,.T.); +#165874 = VERTEX_POINT('',#165875); +#165875 = CARTESIAN_POINT('',(135.757126,-102.5561,1.585)); +#165876 = LINE('',#165877,#165878); +#165877 = CARTESIAN_POINT('',(135.791384,-102.487584,1.585)); +#165878 = VECTOR('',#165879,1.); +#165879 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#165880 = ORIENTED_EDGE('',*,*,#165881,.T.); +#165881 = EDGE_CURVE('',#165874,#165882,#165884,.T.); +#165882 = VERTEX_POINT('',#165883); +#165883 = CARTESIAN_POINT('',(135.757126,-102.568309,1.585)); +#165884 = LINE('',#165885,#165886); +#165885 = CARTESIAN_POINT('',(135.757126,-102.5561,1.585)); +#165886 = VECTOR('',#165887,1.); +#165887 = DIRECTION('',(0.,-1.,0.)); +#165888 = ORIENTED_EDGE('',*,*,#165889,.T.); +#165889 = EDGE_CURVE('',#165882,#165890,#165892,.T.); +#165890 = VERTEX_POINT('',#165891); +#165891 = CARTESIAN_POINT('',(135.890307,-102.70149,1.585)); +#165892 = CIRCLE('',#165893,0.18686440374); +#165893 = AXIS2_PLACEMENT_3D('',#165894,#165895,#165896); +#165894 = CARTESIAN_POINT('',(135.937843,-102.520773,1.585)); +#165895 = DIRECTION('',(0.,0.,1.)); +#165896 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#165897 = ORIENTED_EDGE('',*,*,#165898,.T.); +#165898 = EDGE_CURVE('',#165890,#165899,#165901,.T.); +#165899 = VERTEX_POINT('',#165900); +#165900 = CARTESIAN_POINT('',(136.045373,-102.70149,1.585)); +#165901 = LINE('',#165902,#165903); +#165902 = CARTESIAN_POINT('',(135.890307,-102.70149,1.585)); +#165903 = VECTOR('',#165904,1.); +#165904 = DIRECTION('',(1.,0.,0.)); +#165905 = ORIENTED_EDGE('',*,*,#165906,.T.); +#165906 = EDGE_CURVE('',#165899,#165907,#165909,.T.); +#165907 = VERTEX_POINT('',#165908); +#165908 = CARTESIAN_POINT('',(136.178554,-102.568309,1.585)); +#165909 = CIRCLE('',#165910,0.18686440374); +#165910 = AXIS2_PLACEMENT_3D('',#165911,#165912,#165913); +#165911 = CARTESIAN_POINT('',(135.997837,-102.520773,1.585)); +#165912 = DIRECTION('',(0.,0.,1.)); +#165913 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#165914 = ORIENTED_EDGE('',*,*,#165915,.T.); +#165915 = EDGE_CURVE('',#165907,#165916,#165918,.T.); +#165916 = VERTEX_POINT('',#165917); +#165917 = CARTESIAN_POINT('',(136.178554,-102.5561,1.585)); +#165918 = LINE('',#165919,#165920); +#165919 = CARTESIAN_POINT('',(136.178554,-102.568309,1.585)); +#165920 = VECTOR('',#165921,1.); +#165921 = DIRECTION('',(0.,1.,0.)); +#165922 = ORIENTED_EDGE('',*,*,#165923,.T.); +#165923 = EDGE_CURVE('',#165916,#165924,#165926,.T.); +#165924 = VERTEX_POINT('',#165925); +#165925 = CARTESIAN_POINT('',(136.144296,-102.487584,1.585)); +#165926 = LINE('',#165927,#165928); +#165927 = CARTESIAN_POINT('',(136.178554,-102.5561,1.585)); +#165928 = VECTOR('',#165929,1.); +#165929 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#165930 = ORIENTED_EDGE('',*,*,#165931,.T.); +#165931 = EDGE_CURVE('',#165924,#165855,#165932,.T.); +#165932 = LINE('',#165933,#165934); +#165933 = CARTESIAN_POINT('',(136.144296,-102.487584,1.585)); +#165934 = VECTOR('',#165935,1.); +#165935 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165936 = PLANE('',#165937); +#165937 = AXIS2_PLACEMENT_3D('',#165938,#165939,#165940); +#165938 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165939 = DIRECTION('',(0.,0.,1.)); +#165940 = DIRECTION('',(1.,0.,-0.)); +#165941 = SHELL_BASED_SURFACE_MODEL('',(#165942)); +#165942 = OPEN_SHELL('',(#165943)); +#165943 = ADVANCED_FACE('',(#165944),#166129,.T.); +#165944 = FACE_BOUND('',#165945,.F.); +#165945 = EDGE_LOOP('',(#165946,#165957,#165965,#165974,#165982,#165991, + #165999,#166008,#166016,#166024,#166032,#166041,#166049,#166058, + #166066,#166075,#166083,#166091,#166099,#166107,#166115,#166123)); +#165946 = ORIENTED_EDGE('',*,*,#165947,.T.); +#165947 = EDGE_CURVE('',#165948,#165950,#165952,.T.); +#165948 = VERTEX_POINT('',#165949); +#165949 = CARTESIAN_POINT('',(129.883078,-102.080381,1.585)); +#165950 = VERTEX_POINT('',#165951); +#165951 = CARTESIAN_POINT('',(130.342841,-102.083178,1.585)); +#165952 = CIRCLE('',#165953,0.46078517582); +#165953 = AXIS2_PLACEMENT_3D('',#165954,#165955,#165956); +#165954 = CARTESIAN_POINT('',(130.11053010897,-102.4811159702,1.585)); +#165955 = DIRECTION('',(0.,0.,-1.)); +#165956 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#165957 = ORIENTED_EDGE('',*,*,#165958,.T.); +#165958 = EDGE_CURVE('',#165950,#165959,#165961,.T.); +#165959 = VERTEX_POINT('',#165960); +#165960 = CARTESIAN_POINT('',(130.411152,-102.151489,1.585)); +#165961 = LINE('',#165962,#165963); +#165962 = CARTESIAN_POINT('',(130.342841,-102.083178,1.585)); +#165963 = VECTOR('',#165964,1.); +#165964 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#165965 = ORIENTED_EDGE('',*,*,#165966,.T.); +#165966 = EDGE_CURVE('',#165959,#165967,#165969,.T.); +#165967 = VERTEX_POINT('',#165968); +#165968 = CARTESIAN_POINT('',(130.295759,-102.24619,1.585)); +#165969 = CIRCLE('',#165970,7.500003178655E-02); +#165970 = AXIS2_PLACEMENT_3D('',#165971,#165972,#165973); +#165971 = CARTESIAN_POINT('',(130.34879156212,-102.1931565,1.585)); +#165972 = DIRECTION('',(0.,0.,-1.)); +#165973 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#165974 = ORIENTED_EDGE('',*,*,#165975,.T.); +#165975 = EDGE_CURVE('',#165967,#165976,#165978,.T.); +#165976 = VERTEX_POINT('',#165977); +#165977 = CARTESIAN_POINT('',(130.260659,-102.21109,1.585)); +#165978 = LINE('',#165979,#165980); +#165979 = CARTESIAN_POINT('',(130.295759,-102.24619,1.585)); +#165980 = VECTOR('',#165981,1.); +#165981 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165982 = ORIENTED_EDGE('',*,*,#165983,.T.); +#165983 = EDGE_CURVE('',#165976,#165984,#165986,.T.); +#165984 = VERTEX_POINT('',#165985); +#165985 = CARTESIAN_POINT('',(129.960735,-102.21109,1.585)); +#165986 = CIRCLE('',#165987,0.299308637371); +#165987 = AXIS2_PLACEMENT_3D('',#165988,#165989,#165990); +#165988 = CARTESIAN_POINT('',(130.110697,-102.470121,1.585)); +#165989 = DIRECTION('',(0.,0.,1.)); +#165990 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#165991 = ORIENTED_EDGE('',*,*,#165992,.T.); +#165992 = EDGE_CURVE('',#165984,#165993,#165995,.T.); +#165993 = VERTEX_POINT('',#165994); +#165994 = CARTESIAN_POINT('',(129.886622,-102.285203,1.585)); +#165995 = LINE('',#165996,#165997); +#165996 = CARTESIAN_POINT('',(129.960735,-102.21109,1.585)); +#165997 = VECTOR('',#165998,1.); +#165998 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#165999 = ORIENTED_EDGE('',*,*,#166000,.T.); +#166000 = EDGE_CURVE('',#165993,#166001,#166003,.T.); +#166001 = VERTEX_POINT('',#166002); +#166002 = CARTESIAN_POINT('',(129.804745,-102.660113,1.585)); +#166003 = CIRCLE('',#166004,0.611712714363); +#166004 = AXIS2_PLACEMENT_3D('',#166005,#166006,#166007); +#166005 = CARTESIAN_POINT('',(130.41315027521,-102.5965876822,1.585)); +#166006 = DIRECTION('',(0.,0.,1.)); +#166007 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#166008 = ORIENTED_EDGE('',*,*,#166009,.T.); +#166009 = EDGE_CURVE('',#166001,#166010,#166012,.T.); +#166010 = VERTEX_POINT('',#166011); +#166011 = CARTESIAN_POINT('',(129.848128,-102.833647,1.585)); +#166012 = LINE('',#166013,#166014); +#166013 = CARTESIAN_POINT('',(129.804745,-102.660113,1.585)); +#166014 = VECTOR('',#166015,1.); +#166015 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#166016 = ORIENTED_EDGE('',*,*,#166017,.T.); +#166017 = EDGE_CURVE('',#166010,#166018,#166020,.T.); +#166018 = VERTEX_POINT('',#166019); +#166019 = CARTESIAN_POINT('',(129.886622,-102.910634,1.585)); +#166020 = LINE('',#166021,#166022); +#166021 = CARTESIAN_POINT('',(129.848128,-102.833647,1.585)); +#166022 = VECTOR('',#166023,1.); +#166023 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#166024 = ORIENTED_EDGE('',*,*,#166025,.T.); +#166025 = EDGE_CURVE('',#166018,#166026,#166028,.T.); +#166026 = VERTEX_POINT('',#166027); +#166027 = CARTESIAN_POINT('',(129.960735,-102.984748,1.585)); +#166028 = LINE('',#166029,#166030); +#166029 = CARTESIAN_POINT('',(129.886622,-102.910634,1.585)); +#166030 = VECTOR('',#166031,1.); +#166031 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#166032 = ORIENTED_EDGE('',*,*,#166033,.T.); +#166033 = EDGE_CURVE('',#166026,#166034,#166036,.T.); +#166034 = VERTEX_POINT('',#166035); +#166035 = CARTESIAN_POINT('',(130.260659,-102.984747,1.585)); +#166036 = CIRCLE('',#166037,0.299305962385); +#166037 = AXIS2_PLACEMENT_3D('',#166038,#166039,#166040); +#166038 = CARTESIAN_POINT('',(130.11069613635,-102.7257195909,1.585)); +#166039 = DIRECTION('',(0.,0.,1.)); +#166040 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#166041 = ORIENTED_EDGE('',*,*,#166042,.T.); +#166042 = EDGE_CURVE('',#166034,#166043,#166045,.T.); +#166043 = VERTEX_POINT('',#166044); +#166044 = CARTESIAN_POINT('',(130.307124,-102.94032,1.585)); +#166045 = LINE('',#166046,#166047); +#166046 = CARTESIAN_POINT('',(130.260659,-102.984747,1.585)); +#166047 = VECTOR('',#166048,1.); +#166048 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#166049 = ORIENTED_EDGE('',*,*,#166050,.T.); +#166050 = EDGE_CURVE('',#166043,#166051,#166053,.T.); +#166051 = VERTEX_POINT('',#166052); +#166052 = CARTESIAN_POINT('',(130.401825,-103.055713,1.585)); +#166053 = CIRCLE('',#166054,7.499993690112E-02); +#166054 = AXIS2_PLACEMENT_3D('',#166055,#166056,#166057); +#166055 = CARTESIAN_POINT('',(130.3487922483,-103.0026798237,1.585)); +#166056 = DIRECTION('',(0.,0.,-1.)); +#166057 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#166058 = ORIENTED_EDGE('',*,*,#166059,.T.); +#166059 = EDGE_CURVE('',#166051,#166060,#166062,.T.); +#166060 = VERTEX_POINT('',#166061); +#166061 = CARTESIAN_POINT('',(130.338315,-103.115457,1.585)); +#166062 = LINE('',#166063,#166064); +#166063 = CARTESIAN_POINT('',(130.401825,-103.055713,1.585)); +#166064 = VECTOR('',#166065,1.); +#166065 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#166066 = ORIENTED_EDGE('',*,*,#166067,.T.); +#166067 = EDGE_CURVE('',#166060,#166068,#166070,.T.); +#166068 = VERTEX_POINT('',#166069); +#166069 = CARTESIAN_POINT('',(129.878553,-103.112661,1.585)); +#166070 = CIRCLE('',#166071,0.461067828848); +#166071 = AXIS2_PLACEMENT_3D('',#166072,#166073,#166074); +#166072 = CARTESIAN_POINT('',(130.11086451268,-102.7143961335,1.585)); +#166073 = DIRECTION('',(-0.,0.,-1.)); +#166074 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#166075 = ORIENTED_EDGE('',*,*,#166076,.T.); +#166076 = EDGE_CURVE('',#166068,#166077,#166079,.T.); +#166077 = VERTEX_POINT('',#166078); +#166078 = CARTESIAN_POINT('',(129.761864,-102.994898,1.585)); +#166079 = LINE('',#166080,#166081); +#166080 = CARTESIAN_POINT('',(129.878553,-103.112661,1.585)); +#166081 = VECTOR('',#166082,1.); +#166082 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#166083 = ORIENTED_EDGE('',*,*,#166084,.T.); +#166084 = EDGE_CURVE('',#166077,#166085,#166087,.T.); +#166085 = VERTEX_POINT('',#166086); +#166086 = CARTESIAN_POINT('',(129.704603,-102.878013,1.585)); +#166087 = LINE('',#166088,#166089); +#166088 = CARTESIAN_POINT('',(129.761864,-102.994898,1.585)); +#166089 = VECTOR('',#166090,1.); +#166090 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#166091 = ORIENTED_EDGE('',*,*,#166092,.T.); +#166092 = EDGE_CURVE('',#166085,#166093,#166095,.T.); +#166093 = VERTEX_POINT('',#166094); +#166094 = CARTESIAN_POINT('',(129.654745,-102.669347,1.585)); +#166095 = LINE('',#166096,#166097); +#166096 = CARTESIAN_POINT('',(129.704603,-102.878013,1.585)); +#166097 = VECTOR('',#166098,1.); +#166098 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#166099 = ORIENTED_EDGE('',*,*,#166100,.T.); +#166100 = EDGE_CURVE('',#166093,#166101,#166103,.T.); +#166101 = VERTEX_POINT('',#166102); +#166102 = CARTESIAN_POINT('',(129.656984,-102.5083,1.585)); +#166103 = LINE('',#166104,#166105); +#166104 = CARTESIAN_POINT('',(129.654745,-102.669347,1.585)); +#166105 = VECTOR('',#166106,1.); +#166106 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#166107 = ORIENTED_EDGE('',*,*,#166108,.T.); +#166108 = EDGE_CURVE('',#166101,#166109,#166111,.T.); +#166109 = VERTEX_POINT('',#166110); +#166110 = CARTESIAN_POINT('',(129.710282,-102.302473,1.585)); +#166111 = LINE('',#166112,#166113); +#166112 = CARTESIAN_POINT('',(129.656984,-102.5083,1.585)); +#166113 = VECTOR('',#166114,1.); +#166114 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#166115 = ORIENTED_EDGE('',*,*,#166116,.T.); +#166116 = EDGE_CURVE('',#166109,#166117,#166119,.T.); +#166117 = VERTEX_POINT('',#166118); +#166118 = CARTESIAN_POINT('',(129.767231,-102.193492,1.585)); +#166119 = LINE('',#166120,#166121); +#166120 = CARTESIAN_POINT('',(129.710282,-102.302473,1.585)); +#166121 = VECTOR('',#166122,1.); +#166122 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#166123 = ORIENTED_EDGE('',*,*,#166124,.T.); +#166124 = EDGE_CURVE('',#166117,#165948,#166125,.T.); +#166125 = LINE('',#166126,#166127); +#166126 = CARTESIAN_POINT('',(129.767231,-102.193492,1.585)); +#166127 = VECTOR('',#166128,1.); +#166128 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#166129 = PLANE('',#166130); +#166130 = AXIS2_PLACEMENT_3D('',#166131,#166132,#166133); +#166131 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166132 = DIRECTION('',(0.,0.,1.)); +#166133 = DIRECTION('',(1.,0.,-0.)); +#166134 = SHELL_BASED_SURFACE_MODEL('',(#166135)); +#166135 = OPEN_SHELL('',(#166136)); +#166136 = ADVANCED_FACE('',(#166137),#166323,.T.); +#166137 = FACE_BOUND('',#166138,.F.); +#166138 = EDGE_LOOP('',(#166139,#166150,#166158,#166167,#166175,#166183, + #166192,#166200,#166209,#166217,#166225,#166233,#166242,#166250, + #166259,#166267,#166276,#166284,#166292,#166300,#166309,#166317)); +#166139 = ORIENTED_EDGE('',*,*,#166140,.T.); +#166140 = EDGE_CURVE('',#166141,#166143,#166145,.T.); +#166141 = VERTEX_POINT('',#166142); +#166142 = CARTESIAN_POINT('',(130.667494,-102.171478,1.585)); +#166143 = VERTEX_POINT('',#166144); +#166144 = CARTESIAN_POINT('',(130.682126,-102.022919,1.585)); +#166145 = CIRCLE('',#166146,7.500006711463E-02); +#166146 = AXIS2_PLACEMENT_3D('',#166147,#166148,#166149); +#166147 = CARTESIAN_POINT('',(130.68212593288,-102.0979190671,1.585)); +#166148 = DIRECTION('',(0.,0.,-1.)); +#166149 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#166150 = ORIENTED_EDGE('',*,*,#166151,.T.); +#166151 = EDGE_CURVE('',#166143,#166152,#166154,.T.); +#166152 = VERTEX_POINT('',#166153); +#166153 = CARTESIAN_POINT('',(131.308911,-102.023681,1.585)); +#166154 = LINE('',#166155,#166156); +#166155 = CARTESIAN_POINT('',(130.682126,-102.022919,1.585)); +#166156 = VECTOR('',#166157,1.); +#166157 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#166158 = ORIENTED_EDGE('',*,*,#166159,.T.); +#166159 = EDGE_CURVE('',#166152,#166160,#166162,.T.); +#166160 = VERTEX_POINT('',#166161); +#166161 = CARTESIAN_POINT('',(131.374732,-102.112551,1.585)); +#166162 = CIRCLE('',#166163,7.447391611626E-02); +#166163 = AXIS2_PLACEMENT_3D('',#166164,#166165,#166166); +#166164 = CARTESIAN_POINT('',(131.30173192664,-102.0978080874,1.585)); +#166165 = DIRECTION('',(0.,0.,-1.)); +#166166 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#166167 = ORIENTED_EDGE('',*,*,#166168,.T.); +#166168 = EDGE_CURVE('',#166160,#166169,#166171,.T.); +#166169 = VERTEX_POINT('',#166170); +#166170 = CARTESIAN_POINT('',(131.357616,-102.147307,1.585)); +#166171 = LINE('',#166172,#166173); +#166172 = CARTESIAN_POINT('',(131.374732,-102.112551,1.585)); +#166173 = VECTOR('',#166174,1.); +#166174 = DIRECTION('',(-0.441795255026,-0.897115908139,0.)); +#166175 = ORIENTED_EDGE('',*,*,#166176,.T.); +#166176 = EDGE_CURVE('',#166169,#166177,#166179,.T.); +#166177 = VERTEX_POINT('',#166178); +#166178 = CARTESIAN_POINT('',(131.13072,-102.406616,1.585)); +#166179 = LINE('',#166180,#166181); +#166180 = CARTESIAN_POINT('',(131.357616,-102.147307,1.585)); +#166181 = VECTOR('',#166182,1.); +#166182 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#166183 = ORIENTED_EDGE('',*,*,#166184,.T.); +#166184 = EDGE_CURVE('',#166177,#166185,#166187,.T.); +#166185 = VERTEX_POINT('',#166186); +#166186 = CARTESIAN_POINT('',(131.374732,-102.654715,1.585)); +#166187 = CIRCLE('',#166188,0.348520834816); +#166188 = AXIS2_PLACEMENT_3D('',#166189,#166190,#166191); +#166189 = CARTESIAN_POINT('',(131.0374266174,-102.7424181993,1.585)); +#166190 = DIRECTION('',(0.,0.,-1.)); +#166191 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#166192 = ORIENTED_EDGE('',*,*,#166193,.T.); +#166193 = EDGE_CURVE('',#166185,#166194,#166196,.T.); +#166194 = VERTEX_POINT('',#166195); +#166195 = CARTESIAN_POINT('',(131.37351,-102.927252,1.585)); +#166196 = LINE('',#166197,#166198); +#166197 = CARTESIAN_POINT('',(131.374732,-102.654715,1.585)); +#166198 = VECTOR('',#166199,1.); +#166199 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#166200 = ORIENTED_EDGE('',*,*,#166201,.T.); +#166201 = EDGE_CURVE('',#166194,#166202,#166204,.T.); +#166202 = VERTEX_POINT('',#166203); +#166203 = CARTESIAN_POINT('',(131.125329,-103.171478,1.585)); +#166204 = CIRCLE('',#166205,0.348635327447); +#166205 = AXIS2_PLACEMENT_3D('',#166206,#166207,#166208); +#166206 = CARTESIAN_POINT('',(131.03755748129,-102.8340720841,1.585)); +#166207 = DIRECTION('',(0.,0.,-1.)); +#166208 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#166209 = ORIENTED_EDGE('',*,*,#166210,.T.); +#166210 = EDGE_CURVE('',#166202,#166211,#166213,.T.); +#166211 = VERTEX_POINT('',#166212); +#166212 = CARTESIAN_POINT('',(130.805173,-103.170256,1.585)); +#166213 = LINE('',#166214,#166215); +#166214 = CARTESIAN_POINT('',(131.125329,-103.171478,1.585)); +#166215 = VECTOR('',#166216,1.); +#166216 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#166217 = ORIENTED_EDGE('',*,*,#166218,.T.); +#166218 = EDGE_CURVE('',#166211,#166219,#166221,.T.); +#166219 = VERTEX_POINT('',#166220); +#166220 = CARTESIAN_POINT('',(130.68246,-103.10805,1.585)); +#166221 = LINE('',#166222,#166223); +#166222 = CARTESIAN_POINT('',(130.805173,-103.170256,1.585)); +#166223 = VECTOR('',#166224,1.); +#166224 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#166225 = ORIENTED_EDGE('',*,*,#166226,.T.); +#166226 = EDGE_CURVE('',#166219,#166227,#166229,.T.); +#166227 = VERTEX_POINT('',#166228); +#166228 = CARTESIAN_POINT('',(130.619765,-103.044347,1.585)); +#166229 = LINE('',#166230,#166231); +#166230 = CARTESIAN_POINT('',(130.68246,-103.10805,1.585)); +#166231 = VECTOR('',#166232,1.); +#166232 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#166233 = ORIENTED_EDGE('',*,*,#166234,.T.); +#166234 = EDGE_CURVE('',#166227,#166235,#166237,.T.); +#166235 = VERTEX_POINT('',#166236); +#166236 = CARTESIAN_POINT('',(130.73516,-102.949648,1.585)); +#166237 = CIRCLE('',#166238,7.50001266804E-02); +#166238 = AXIS2_PLACEMENT_3D('',#166239,#166240,#166241); +#166239 = CARTESIAN_POINT('',(130.68212605199,-103.0026802483,1.585)); +#166240 = DIRECTION('',(0.,0.,-1.)); +#166241 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#166242 = ORIENTED_EDGE('',*,*,#166243,.T.); +#166243 = EDGE_CURVE('',#166235,#166244,#166246,.T.); +#166244 = VERTEX_POINT('',#166245); +#166245 = CARTESIAN_POINT('',(130.774172,-102.988661,1.585)); +#166246 = LINE('',#166247,#166248); +#166247 = CARTESIAN_POINT('',(130.73516,-102.949648,1.585)); +#166248 = VECTOR('',#166249,1.); +#166249 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#166250 = ORIENTED_EDGE('',*,*,#166251,.T.); +#166251 = EDGE_CURVE('',#166244,#166252,#166254,.T.); +#166252 = VERTEX_POINT('',#166253); +#166253 = CARTESIAN_POINT('',(131.161507,-102.988661,1.585)); +#166254 = CIRCLE('',#166255,0.358502380266); +#166255 = AXIS2_PLACEMENT_3D('',#166256,#166257,#166258); +#166256 = CARTESIAN_POINT('',(130.9678395,-102.686971,1.585)); +#166257 = DIRECTION('',(0.,0.,1.)); +#166258 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#166259 = ORIENTED_EDGE('',*,*,#166260,.T.); +#166260 = EDGE_CURVE('',#166252,#166261,#166263,.T.); +#166261 = VERTEX_POINT('',#166262); +#166262 = CARTESIAN_POINT('',(131.191914,-102.958253,1.585)); +#166263 = LINE('',#166264,#166265); +#166264 = CARTESIAN_POINT('',(131.161507,-102.988661,1.585)); +#166265 = VECTOR('',#166266,1.); +#166266 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#166267 = ORIENTED_EDGE('',*,*,#166268,.T.); +#166268 = EDGE_CURVE('',#166261,#166269,#166271,.T.); +#166269 = VERTEX_POINT('',#166270); +#166270 = CARTESIAN_POINT('',(131.191915,-102.618536,1.585)); +#166271 = CIRCLE('',#166272,0.305616146029); +#166272 = AXIS2_PLACEMENT_3D('',#166273,#166274,#166275); +#166273 = CARTESIAN_POINT('',(130.93784892049,-102.7883937521,1.585)); +#166274 = DIRECTION('',(0.,-0.,1.)); +#166275 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#166276 = ORIENTED_EDGE('',*,*,#166277,.T.); +#166277 = EDGE_CURVE('',#166269,#166278,#166280,.T.); +#166278 = VERTEX_POINT('',#166279); +#166279 = CARTESIAN_POINT('',(131.161508,-102.588129,1.585)); +#166280 = LINE('',#166281,#166282); +#166281 = CARTESIAN_POINT('',(131.191915,-102.618536,1.585)); +#166282 = VECTOR('',#166283,1.); +#166283 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#166284 = ORIENTED_EDGE('',*,*,#166285,.T.); +#166285 = EDGE_CURVE('',#166278,#166286,#166288,.T.); +#166286 = VERTEX_POINT('',#166287); +#166287 = CARTESIAN_POINT('',(131.092992,-102.553871,1.585)); +#166288 = LINE('',#166289,#166290); +#166289 = CARTESIAN_POINT('',(131.161508,-102.588129,1.585)); +#166290 = VECTOR('',#166291,1.); +#166291 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#166292 = ORIENTED_EDGE('',*,*,#166293,.T.); +#166293 = EDGE_CURVE('',#166286,#166294,#166296,.T.); +#166294 = VERTEX_POINT('',#166295); +#166295 = CARTESIAN_POINT('',(130.953208,-102.55243,1.585)); +#166296 = LINE('',#166297,#166298); +#166297 = CARTESIAN_POINT('',(131.092992,-102.553871,1.585)); +#166298 = VECTOR('',#166299,1.); +#166299 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#166300 = ORIENTED_EDGE('',*,*,#166301,.T.); +#166301 = EDGE_CURVE('',#166294,#166302,#166304,.T.); +#166302 = VERTEX_POINT('',#166303); +#166303 = CARTESIAN_POINT('',(130.911397,-102.429483,1.585)); +#166304 = CIRCLE('',#166305,7.500015628759E-02); +#166305 = AXIS2_PLACEMENT_3D('',#166306,#166307,#166308); +#166306 = CARTESIAN_POINT('',(130.96784028432,-102.4788710461,1.585)); +#166307 = DIRECTION('',(0.,0.,-1.)); +#166308 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#166309 = ORIENTED_EDGE('',*,*,#166310,.T.); +#166310 = EDGE_CURVE('',#166302,#166311,#166313,.T.); +#166311 = VERTEX_POINT('',#166312); +#166312 = CARTESIAN_POINT('',(131.135891,-102.172919,1.585)); +#166313 = LINE('',#166314,#166315); +#166314 = CARTESIAN_POINT('',(130.911397,-102.429483,1.585)); +#166315 = VECTOR('',#166316,1.); +#166316 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#166317 = ORIENTED_EDGE('',*,*,#166318,.T.); +#166318 = EDGE_CURVE('',#166311,#166141,#166319,.T.); +#166319 = LINE('',#166320,#166321); +#166320 = CARTESIAN_POINT('',(131.135891,-102.172919,1.585)); +#166321 = VECTOR('',#166322,1.); +#166322 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#166323 = PLANE('',#166324); +#166324 = AXIS2_PLACEMENT_3D('',#166325,#166326,#166327); +#166325 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166326 = DIRECTION('',(0.,0.,1.)); +#166327 = DIRECTION('',(1.,0.,-0.)); +#166328 = SHELL_BASED_SURFACE_MODEL('',(#166329)); +#166329 = OPEN_SHELL('',(#166330)); +#166330 = ADVANCED_FACE('',(#166331),#166466,.T.); +#166331 = FACE_BOUND('',#166332,.F.); +#166332 = EDGE_LOOP('',(#166333,#166344,#166352,#166360,#166368,#166377, + #166385,#166393,#166402,#166410,#166418,#166427,#166435,#166443, + #166452,#166460)); +#166333 = ORIENTED_EDGE('',*,*,#166334,.T.); +#166334 = EDGE_CURVE('',#166335,#166337,#166339,.T.); +#166335 = VERTEX_POINT('',#166336); +#166336 = CARTESIAN_POINT('',(131.874238,-101.991051,1.585)); +#166337 = VERTEX_POINT('',#166338); +#166338 = CARTESIAN_POINT('',(131.991372,-102.074018,1.585)); +#166339 = CIRCLE('',#166340,7.499955990673E-02); +#166340 = AXIS2_PLACEMENT_3D('',#166341,#166342,#166343); +#166341 = CARTESIAN_POINT('',(131.92022150095,-102.0503000643,1.585)); +#166342 = DIRECTION('',(0.,0.,-1.)); +#166343 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#166344 = ORIENTED_EDGE('',*,*,#166345,.T.); +#166345 = EDGE_CURVE('',#166337,#166346,#166348,.T.); +#166346 = VERTEX_POINT('',#166347); +#166347 = CARTESIAN_POINT('',(131.786183,-102.689585,1.585)); +#166348 = LINE('',#166349,#166350); +#166349 = CARTESIAN_POINT('',(131.991372,-102.074018,1.585)); +#166350 = VECTOR('',#166351,1.); +#166351 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#166352 = ORIENTED_EDGE('',*,*,#166353,.T.); +#166353 = EDGE_CURVE('',#166346,#166354,#166356,.T.); +#166354 = VERTEX_POINT('',#166355); +#166355 = CARTESIAN_POINT('',(132.083316,-102.689585,1.585)); +#166356 = LINE('',#166357,#166358); +#166357 = CARTESIAN_POINT('',(131.786183,-102.689585,1.585)); +#166358 = VECTOR('',#166359,1.); +#166359 = DIRECTION('',(1.,0.,0.)); +#166360 = ORIENTED_EDGE('',*,*,#166361,.T.); +#166361 = EDGE_CURVE('',#166354,#166362,#166364,.T.); +#166362 = VERTEX_POINT('',#166363); +#166363 = CARTESIAN_POINT('',(132.084757,-102.41662,1.585)); +#166364 = LINE('',#166365,#166366); +#166365 = CARTESIAN_POINT('',(132.083316,-102.689585,1.585)); +#166366 = VECTOR('',#166367,1.); +#166367 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#166368 = ORIENTED_EDGE('',*,*,#166369,.T.); +#166369 = EDGE_CURVE('',#166362,#166370,#166372,.T.); +#166370 = VERTEX_POINT('',#166371); +#166371 = CARTESIAN_POINT('',(132.233316,-102.431252,1.585)); +#166372 = CIRCLE('',#166373,7.500006711465E-02); +#166373 = AXIS2_PLACEMENT_3D('',#166374,#166375,#166376); +#166374 = CARTESIAN_POINT('',(132.15831593288,-102.4312519328,1.585)); +#166375 = DIRECTION('',(0.,0.,-1.)); +#166376 = DIRECTION('',(-0.980784894138,0.195092263892,0.)); +#166377 = ORIENTED_EDGE('',*,*,#166378,.T.); +#166378 = EDGE_CURVE('',#166370,#166379,#166381,.T.); +#166379 = VERTEX_POINT('',#166380); +#166380 = CARTESIAN_POINT('',(132.233316,-102.689585,1.585)); +#166381 = LINE('',#166382,#166383); +#166382 = CARTESIAN_POINT('',(132.233316,-102.431252,1.585)); +#166383 = VECTOR('',#166384,1.); +#166384 = DIRECTION('',(0.,-1.,0.)); +#166385 = ORIENTED_EDGE('',*,*,#166386,.T.); +#166386 = EDGE_CURVE('',#166379,#166387,#166389,.T.); +#166387 = VERTEX_POINT('',#166388); +#166388 = CARTESIAN_POINT('',(132.315805,-102.691026,1.585)); +#166389 = LINE('',#166390,#166391); +#166390 = CARTESIAN_POINT('',(132.233316,-102.689585,1.585)); +#166391 = VECTOR('',#166392,1.); +#166392 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#166393 = ORIENTED_EDGE('',*,*,#166394,.T.); +#166394 = EDGE_CURVE('',#166387,#166395,#166397,.T.); +#166395 = VERTEX_POINT('',#166396); +#166396 = CARTESIAN_POINT('',(132.301173,-102.839585,1.585)); +#166397 = CIRCLE('',#166398,7.500006711464E-02); +#166398 = AXIS2_PLACEMENT_3D('',#166399,#166400,#166401); +#166399 = CARTESIAN_POINT('',(132.30117306711,-102.7645849328,1.585)); +#166400 = DIRECTION('',(0.,0.,-1.)); +#166401 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#166402 = ORIENTED_EDGE('',*,*,#166403,.T.); +#166403 = EDGE_CURVE('',#166395,#166404,#166406,.T.); +#166404 = VERTEX_POINT('',#166405); +#166405 = CARTESIAN_POINT('',(132.233316,-102.839585,1.585)); +#166406 = LINE('',#166407,#166408); +#166407 = CARTESIAN_POINT('',(132.301173,-102.839585,1.585)); +#166408 = VECTOR('',#166409,1.); +#166409 = DIRECTION('',(-1.,0.,0.)); +#166410 = ORIENTED_EDGE('',*,*,#166411,.T.); +#166411 = EDGE_CURVE('',#166404,#166412,#166414,.T.); +#166412 = VERTEX_POINT('',#166413); +#166413 = CARTESIAN_POINT('',(132.231875,-103.112551,1.585)); +#166414 = LINE('',#166415,#166416); +#166415 = CARTESIAN_POINT('',(132.233316,-102.839585,1.585)); +#166416 = VECTOR('',#166417,1.); +#166417 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#166418 = ORIENTED_EDGE('',*,*,#166419,.T.); +#166419 = EDGE_CURVE('',#166412,#166420,#166422,.T.); +#166420 = VERTEX_POINT('',#166421); +#166421 = CARTESIAN_POINT('',(132.083316,-103.097919,1.585)); +#166422 = CIRCLE('',#166423,7.500006711464E-02); +#166423 = AXIS2_PLACEMENT_3D('',#166424,#166425,#166426); +#166424 = CARTESIAN_POINT('',(132.15831606711,-103.0979190671,1.585)); +#166425 = DIRECTION('',(-0.,0.,-1.)); +#166426 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#166427 = ORIENTED_EDGE('',*,*,#166428,.T.); +#166428 = EDGE_CURVE('',#166420,#166429,#166431,.T.); +#166429 = VERTEX_POINT('',#166430); +#166430 = CARTESIAN_POINT('',(132.083316,-102.839585,1.585)); +#166431 = LINE('',#166432,#166433); +#166432 = CARTESIAN_POINT('',(132.083316,-103.097919,1.585)); +#166433 = VECTOR('',#166434,1.); +#166434 = DIRECTION('',(0.,1.,0.)); +#166435 = ORIENTED_EDGE('',*,*,#166436,.T.); +#166436 = EDGE_CURVE('',#166429,#166437,#166439,.T.); +#166437 = VERTEX_POINT('',#166438); +#166438 = CARTESIAN_POINT('',(131.667494,-102.838144,1.585)); +#166439 = LINE('',#166440,#166441); +#166440 = CARTESIAN_POINT('',(132.083316,-102.839585,1.585)); +#166441 = VECTOR('',#166442,1.); +#166442 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#166443 = ORIENTED_EDGE('',*,*,#166444,.T.); +#166444 = EDGE_CURVE('',#166437,#166445,#166447,.T.); +#166445 = VERTEX_POINT('',#166446); +#166446 = CARTESIAN_POINT('',(131.610975,-102.740868,1.585)); +#166447 = CIRCLE('',#166448,7.499997045039E-02); +#166448 = AXIS2_PLACEMENT_3D('',#166449,#166450,#166451); +#166449 = CARTESIAN_POINT('',(131.68212617257,-102.7645852133,1.585)); +#166450 = DIRECTION('',(0.,0.,-1.)); +#166451 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#166452 = ORIENTED_EDGE('',*,*,#166453,.T.); +#166453 = EDGE_CURVE('',#166445,#166454,#166456,.T.); +#166454 = VERTEX_POINT('',#166455); +#166455 = CARTESIAN_POINT('',(131.855064,-102.013158,1.585)); +#166456 = LINE('',#166457,#166458); +#166457 = CARTESIAN_POINT('',(131.610975,-102.740868,1.585)); +#166458 = VECTOR('',#166459,1.); +#166459 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#166460 = ORIENTED_EDGE('',*,*,#166461,.T.); +#166461 = EDGE_CURVE('',#166454,#166335,#166462,.T.); +#166462 = LINE('',#166463,#166464); +#166463 = CARTESIAN_POINT('',(131.855064,-102.013158,1.585)); +#166464 = VECTOR('',#166465,1.); +#166465 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#166466 = PLANE('',#166467); +#166467 = AXIS2_PLACEMENT_3D('',#166468,#166469,#166470); +#166468 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166469 = DIRECTION('',(0.,0.,1.)); +#166470 = DIRECTION('',(1.,0.,-0.)); +#166471 = SHELL_BASED_SURFACE_MODEL('',(#166472)); +#166472 = OPEN_SHELL('',(#166473)); +#166473 = ADVANCED_FACE('',(#166474),#166510,.T.); +#166474 = FACE_BOUND('',#166475,.F.); +#166475 = EDGE_LOOP('',(#166476,#166487,#166495,#166504)); +#166476 = ORIENTED_EDGE('',*,*,#166477,.T.); +#166477 = EDGE_CURVE('',#166478,#166480,#166482,.T.); +#166478 = VERTEX_POINT('',#166479); +#166479 = CARTESIAN_POINT('',(119.955398,-103.0231,1.585)); +#166480 = VERTEX_POINT('',#166481); +#166481 = CARTESIAN_POINT('',(119.955398,-102.9031,1.585)); +#166482 = CIRCLE('',#166483,6.000000000043E-02); +#166483 = AXIS2_PLACEMENT_3D('',#166484,#166485,#166486); +#166484 = CARTESIAN_POINT('',(119.95539777441,-102.9631,1.585)); +#166485 = DIRECTION('',(0.,0.,-1.)); +#166486 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#166487 = ORIENTED_EDGE('',*,*,#166488,.T.); +#166488 = EDGE_CURVE('',#166480,#166489,#166491,.T.); +#166489 = VERTEX_POINT('',#166490); +#166490 = CARTESIAN_POINT('',(121.377902,-102.9031,1.585)); +#166491 = LINE('',#166492,#166493); +#166492 = CARTESIAN_POINT('',(119.955398,-102.9031,1.585)); +#166493 = VECTOR('',#166494,1.); +#166494 = DIRECTION('',(1.,0.,0.)); +#166495 = ORIENTED_EDGE('',*,*,#166496,.T.); +#166496 = EDGE_CURVE('',#166489,#166497,#166499,.T.); +#166497 = VERTEX_POINT('',#166498); +#166498 = CARTESIAN_POINT('',(121.377902,-103.0231,1.585)); +#166499 = CIRCLE('',#166500,6.000000000042E-02); +#166500 = AXIS2_PLACEMENT_3D('',#166501,#166502,#166503); +#166501 = CARTESIAN_POINT('',(121.37790222558,-102.9631,1.585)); +#166502 = DIRECTION('',(0.,0.,-1.)); +#166503 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166504 = ORIENTED_EDGE('',*,*,#166505,.T.); +#166505 = EDGE_CURVE('',#166497,#166478,#166506,.T.); +#166506 = LINE('',#166507,#166508); +#166507 = CARTESIAN_POINT('',(121.377902,-103.0231,1.585)); +#166508 = VECTOR('',#166509,1.); +#166509 = DIRECTION('',(-1.,0.,0.)); +#166510 = PLANE('',#166511); +#166511 = AXIS2_PLACEMENT_3D('',#166512,#166513,#166514); +#166512 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166513 = DIRECTION('',(0.,0.,1.)); +#166514 = DIRECTION('',(1.,0.,-0.)); +#166515 = SHELL_BASED_SURFACE_MODEL('',(#166516)); +#166516 = OPEN_SHELL('',(#166517)); +#166517 = ADVANCED_FACE('',(#166518),#166554,.T.); +#166518 = FACE_BOUND('',#166519,.F.); +#166519 = EDGE_LOOP('',(#166520,#166531,#166539,#166548)); +#166520 = ORIENTED_EDGE('',*,*,#166521,.T.); +#166521 = EDGE_CURVE('',#166522,#166524,#166526,.T.); +#166522 = VERTEX_POINT('',#166523); +#166523 = CARTESIAN_POINT('',(125.455398,-103.0231,1.585)); +#166524 = VERTEX_POINT('',#166525); +#166525 = CARTESIAN_POINT('',(125.455398,-102.9031,1.585)); +#166526 = CIRCLE('',#166527,6.000000000043E-02); +#166527 = AXIS2_PLACEMENT_3D('',#166528,#166529,#166530); +#166528 = CARTESIAN_POINT('',(125.45539777441,-102.9631,1.585)); +#166529 = DIRECTION('',(0.,0.,-1.)); +#166530 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#166531 = ORIENTED_EDGE('',*,*,#166532,.T.); +#166532 = EDGE_CURVE('',#166524,#166533,#166535,.T.); +#166533 = VERTEX_POINT('',#166534); +#166534 = CARTESIAN_POINT('',(126.877902,-102.9031,1.585)); +#166535 = LINE('',#166536,#166537); +#166536 = CARTESIAN_POINT('',(125.455398,-102.9031,1.585)); +#166537 = VECTOR('',#166538,1.); +#166538 = DIRECTION('',(1.,0.,0.)); +#166539 = ORIENTED_EDGE('',*,*,#166540,.T.); +#166540 = EDGE_CURVE('',#166533,#166541,#166543,.T.); +#166541 = VERTEX_POINT('',#166542); +#166542 = CARTESIAN_POINT('',(126.877902,-103.0231,1.585)); +#166543 = CIRCLE('',#166544,6.000000000042E-02); +#166544 = AXIS2_PLACEMENT_3D('',#166545,#166546,#166547); +#166545 = CARTESIAN_POINT('',(126.87790222558,-102.9631,1.585)); +#166546 = DIRECTION('',(0.,0.,-1.)); +#166547 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166548 = ORIENTED_EDGE('',*,*,#166549,.T.); +#166549 = EDGE_CURVE('',#166541,#166522,#166550,.T.); +#166550 = LINE('',#166551,#166552); +#166551 = CARTESIAN_POINT('',(126.877902,-103.0231,1.585)); +#166552 = VECTOR('',#166553,1.); +#166553 = DIRECTION('',(-1.,0.,0.)); +#166554 = PLANE('',#166555); +#166555 = AXIS2_PLACEMENT_3D('',#166556,#166557,#166558); +#166556 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166557 = DIRECTION('',(0.,0.,1.)); +#166558 = DIRECTION('',(1.,0.,-0.)); +#166559 = SHELL_BASED_SURFACE_MODEL('',(#166560)); +#166560 = OPEN_SHELL('',(#166561)); +#166561 = ADVANCED_FACE('',(#166562),#166598,.T.); +#166562 = FACE_BOUND('',#166563,.F.); +#166563 = EDGE_LOOP('',(#166564,#166575,#166583,#166592)); +#166564 = ORIENTED_EDGE('',*,*,#166565,.T.); +#166565 = EDGE_CURVE('',#166566,#166568,#166570,.T.); +#166566 = VERTEX_POINT('',#166567); +#166567 = CARTESIAN_POINT('',(96.629392,-102.9056,1.585)); +#166568 = VERTEX_POINT('',#166569); +#166569 = CARTESIAN_POINT('',(96.629392,-102.7856,1.585)); +#166570 = CIRCLE('',#166571,6.000000000043E-02); +#166571 = AXIS2_PLACEMENT_3D('',#166572,#166573,#166574); +#166572 = CARTESIAN_POINT('',(96.629391774412,-102.8456,1.585)); +#166573 = DIRECTION('',(0.,0.,-1.)); +#166574 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166575 = ORIENTED_EDGE('',*,*,#166576,.T.); +#166576 = EDGE_CURVE('',#166568,#166577,#166579,.T.); +#166577 = VERTEX_POINT('',#166578); +#166578 = CARTESIAN_POINT('',(97.103908,-102.7856,1.585)); +#166579 = LINE('',#166580,#166581); +#166580 = CARTESIAN_POINT('',(96.629392,-102.7856,1.585)); +#166581 = VECTOR('',#166582,1.); +#166582 = DIRECTION('',(1.,0.,0.)); +#166583 = ORIENTED_EDGE('',*,*,#166584,.T.); +#166584 = EDGE_CURVE('',#166577,#166585,#166587,.T.); +#166585 = VERTEX_POINT('',#166586); +#166586 = CARTESIAN_POINT('',(97.103908,-102.9056,1.585)); +#166587 = CIRCLE('',#166588,6.000000000043E-02); +#166588 = AXIS2_PLACEMENT_3D('',#166589,#166590,#166591); +#166589 = CARTESIAN_POINT('',(97.103908225588,-102.8456,1.585)); +#166590 = DIRECTION('',(0.,0.,-1.)); +#166591 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166592 = ORIENTED_EDGE('',*,*,#166593,.T.); +#166593 = EDGE_CURVE('',#166585,#166566,#166594,.T.); +#166594 = LINE('',#166595,#166596); +#166595 = CARTESIAN_POINT('',(97.103908,-102.9056,1.585)); +#166596 = VECTOR('',#166597,1.); +#166597 = DIRECTION('',(-1.,0.,0.)); +#166598 = PLANE('',#166599); +#166599 = AXIS2_PLACEMENT_3D('',#166600,#166601,#166602); +#166600 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166601 = DIRECTION('',(0.,0.,1.)); +#166602 = DIRECTION('',(1.,0.,-0.)); +#166603 = SHELL_BASED_SURFACE_MODEL('',(#166604)); +#166604 = OPEN_SHELL('',(#166605)); +#166605 = ADVANCED_FACE('',(#166606),#166642,.T.); +#166606 = FACE_BOUND('',#166607,.F.); +#166607 = EDGE_LOOP('',(#166608,#166619,#166627,#166636)); +#166608 = ORIENTED_EDGE('',*,*,#166609,.T.); +#166609 = EDGE_CURVE('',#166610,#166612,#166614,.T.); +#166610 = VERTEX_POINT('',#166611); +#166611 = CARTESIAN_POINT('',(100.629392,-102.9056,1.585)); +#166612 = VERTEX_POINT('',#166613); +#166613 = CARTESIAN_POINT('',(100.629392,-102.7856,1.585)); +#166614 = CIRCLE('',#166615,6.000000000043E-02); +#166615 = AXIS2_PLACEMENT_3D('',#166616,#166617,#166618); +#166616 = CARTESIAN_POINT('',(100.62939177441,-102.8456,1.585)); +#166617 = DIRECTION('',(0.,0.,-1.)); +#166618 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166619 = ORIENTED_EDGE('',*,*,#166620,.T.); +#166620 = EDGE_CURVE('',#166612,#166621,#166623,.T.); +#166621 = VERTEX_POINT('',#166622); +#166622 = CARTESIAN_POINT('',(101.103908,-102.7856,1.585)); +#166623 = LINE('',#166624,#166625); +#166624 = CARTESIAN_POINT('',(100.629392,-102.7856,1.585)); +#166625 = VECTOR('',#166626,1.); +#166626 = DIRECTION('',(1.,0.,0.)); +#166627 = ORIENTED_EDGE('',*,*,#166628,.T.); +#166628 = EDGE_CURVE('',#166621,#166629,#166631,.T.); +#166629 = VERTEX_POINT('',#166630); +#166630 = CARTESIAN_POINT('',(101.103908,-102.9056,1.585)); +#166631 = CIRCLE('',#166632,6.000000000043E-02); +#166632 = AXIS2_PLACEMENT_3D('',#166633,#166634,#166635); +#166633 = CARTESIAN_POINT('',(101.10390822558,-102.8456,1.585)); +#166634 = DIRECTION('',(0.,0.,-1.)); +#166635 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166636 = ORIENTED_EDGE('',*,*,#166637,.T.); +#166637 = EDGE_CURVE('',#166629,#166610,#166638,.T.); +#166638 = LINE('',#166639,#166640); +#166639 = CARTESIAN_POINT('',(101.103908,-102.9056,1.585)); +#166640 = VECTOR('',#166641,1.); +#166641 = DIRECTION('',(-1.,0.,0.)); +#166642 = PLANE('',#166643); +#166643 = AXIS2_PLACEMENT_3D('',#166644,#166645,#166646); +#166644 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166645 = DIRECTION('',(0.,0.,1.)); +#166646 = DIRECTION('',(1.,0.,-0.)); +#166647 = SHELL_BASED_SURFACE_MODEL('',(#166648)); +#166648 = OPEN_SHELL('',(#166649)); +#166649 = ADVANCED_FACE('',(#166650),#166686,.T.); +#166650 = FACE_BOUND('',#166651,.F.); +#166651 = EDGE_LOOP('',(#166652,#166663,#166671,#166680)); +#166652 = ORIENTED_EDGE('',*,*,#166653,.T.); +#166653 = EDGE_CURVE('',#166654,#166656,#166658,.T.); +#166654 = VERTEX_POINT('',#166655); +#166655 = CARTESIAN_POINT('',(104.629392,-102.9056,1.585)); +#166656 = VERTEX_POINT('',#166657); +#166657 = CARTESIAN_POINT('',(104.629392,-102.7856,1.585)); +#166658 = CIRCLE('',#166659,6.000000000043E-02); +#166659 = AXIS2_PLACEMENT_3D('',#166660,#166661,#166662); +#166660 = CARTESIAN_POINT('',(104.62939177441,-102.8456,1.585)); +#166661 = DIRECTION('',(0.,0.,-1.)); +#166662 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166663 = ORIENTED_EDGE('',*,*,#166664,.T.); +#166664 = EDGE_CURVE('',#166656,#166665,#166667,.T.); +#166665 = VERTEX_POINT('',#166666); +#166666 = CARTESIAN_POINT('',(105.103908,-102.7856,1.585)); +#166667 = LINE('',#166668,#166669); +#166668 = CARTESIAN_POINT('',(104.629392,-102.7856,1.585)); +#166669 = VECTOR('',#166670,1.); +#166670 = DIRECTION('',(1.,0.,0.)); +#166671 = ORIENTED_EDGE('',*,*,#166672,.T.); +#166672 = EDGE_CURVE('',#166665,#166673,#166675,.T.); +#166673 = VERTEX_POINT('',#166674); +#166674 = CARTESIAN_POINT('',(105.103908,-102.9056,1.585)); +#166675 = CIRCLE('',#166676,6.000000000043E-02); +#166676 = AXIS2_PLACEMENT_3D('',#166677,#166678,#166679); +#166677 = CARTESIAN_POINT('',(105.10390822558,-102.8456,1.585)); +#166678 = DIRECTION('',(0.,0.,-1.)); +#166679 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166680 = ORIENTED_EDGE('',*,*,#166681,.T.); +#166681 = EDGE_CURVE('',#166673,#166654,#166682,.T.); +#166682 = LINE('',#166683,#166684); +#166683 = CARTESIAN_POINT('',(105.103908,-102.9056,1.585)); +#166684 = VECTOR('',#166685,1.); +#166685 = DIRECTION('',(-1.,0.,0.)); +#166686 = PLANE('',#166687); +#166687 = AXIS2_PLACEMENT_3D('',#166688,#166689,#166690); +#166688 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166689 = DIRECTION('',(0.,0.,1.)); +#166690 = DIRECTION('',(1.,0.,-0.)); +#166691 = SHELL_BASED_SURFACE_MODEL('',(#166692)); +#166692 = OPEN_SHELL('',(#166693)); +#166693 = ADVANCED_FACE('',(#166694),#166730,.T.); +#166694 = FACE_BOUND('',#166695,.F.); +#166695 = EDGE_LOOP('',(#166696,#166707,#166715,#166724)); +#166696 = ORIENTED_EDGE('',*,*,#166697,.T.); +#166697 = EDGE_CURVE('',#166698,#166700,#166702,.T.); +#166698 = VERTEX_POINT('',#166699); +#166699 = CARTESIAN_POINT('',(108.129392,-102.9056,1.585)); +#166700 = VERTEX_POINT('',#166701); +#166701 = CARTESIAN_POINT('',(108.129392,-102.7856,1.585)); +#166702 = CIRCLE('',#166703,6.000000000043E-02); +#166703 = AXIS2_PLACEMENT_3D('',#166704,#166705,#166706); +#166704 = CARTESIAN_POINT('',(108.12939177441,-102.8456,1.585)); +#166705 = DIRECTION('',(0.,0.,-1.)); +#166706 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166707 = ORIENTED_EDGE('',*,*,#166708,.T.); +#166708 = EDGE_CURVE('',#166700,#166709,#166711,.T.); +#166709 = VERTEX_POINT('',#166710); +#166710 = CARTESIAN_POINT('',(108.603908,-102.7856,1.585)); +#166711 = LINE('',#166712,#166713); +#166712 = CARTESIAN_POINT('',(108.129392,-102.7856,1.585)); +#166713 = VECTOR('',#166714,1.); +#166714 = DIRECTION('',(1.,0.,0.)); +#166715 = ORIENTED_EDGE('',*,*,#166716,.T.); +#166716 = EDGE_CURVE('',#166709,#166717,#166719,.T.); +#166717 = VERTEX_POINT('',#166718); +#166718 = CARTESIAN_POINT('',(108.603908,-102.9056,1.585)); +#166719 = CIRCLE('',#166720,6.000000000043E-02); +#166720 = AXIS2_PLACEMENT_3D('',#166721,#166722,#166723); +#166721 = CARTESIAN_POINT('',(108.60390822558,-102.8456,1.585)); +#166722 = DIRECTION('',(0.,0.,-1.)); +#166723 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166724 = ORIENTED_EDGE('',*,*,#166725,.T.); +#166725 = EDGE_CURVE('',#166717,#166698,#166726,.T.); +#166726 = LINE('',#166727,#166728); +#166727 = CARTESIAN_POINT('',(108.603908,-102.9056,1.585)); +#166728 = VECTOR('',#166729,1.); +#166729 = DIRECTION('',(-1.,0.,0.)); +#166730 = PLANE('',#166731); +#166731 = AXIS2_PLACEMENT_3D('',#166732,#166733,#166734); +#166732 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166733 = DIRECTION('',(0.,0.,1.)); +#166734 = DIRECTION('',(1.,0.,-0.)); +#166735 = SHELL_BASED_SURFACE_MODEL('',(#166736)); +#166736 = OPEN_SHELL('',(#166737)); +#166737 = ADVANCED_FACE('',(#166738),#166774,.T.); +#166738 = FACE_BOUND('',#166739,.F.); +#166739 = EDGE_LOOP('',(#166740,#166751,#166759,#166768)); +#166740 = ORIENTED_EDGE('',*,*,#166741,.T.); +#166741 = EDGE_CURVE('',#166742,#166744,#166746,.T.); +#166742 = VERTEX_POINT('',#166743); +#166743 = CARTESIAN_POINT('',(112.129392,-102.9056,1.585)); +#166744 = VERTEX_POINT('',#166745); +#166745 = CARTESIAN_POINT('',(112.129392,-102.7856,1.585)); +#166746 = CIRCLE('',#166747,6.000000000043E-02); +#166747 = AXIS2_PLACEMENT_3D('',#166748,#166749,#166750); +#166748 = CARTESIAN_POINT('',(112.12939177441,-102.8456,1.585)); +#166749 = DIRECTION('',(0.,0.,-1.)); +#166750 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166751 = ORIENTED_EDGE('',*,*,#166752,.T.); +#166752 = EDGE_CURVE('',#166744,#166753,#166755,.T.); +#166753 = VERTEX_POINT('',#166754); +#166754 = CARTESIAN_POINT('',(112.603908,-102.7856,1.585)); +#166755 = LINE('',#166756,#166757); +#166756 = CARTESIAN_POINT('',(112.129392,-102.7856,1.585)); +#166757 = VECTOR('',#166758,1.); +#166758 = DIRECTION('',(1.,0.,0.)); +#166759 = ORIENTED_EDGE('',*,*,#166760,.T.); +#166760 = EDGE_CURVE('',#166753,#166761,#166763,.T.); +#166761 = VERTEX_POINT('',#166762); +#166762 = CARTESIAN_POINT('',(112.603908,-102.9056,1.585)); +#166763 = CIRCLE('',#166764,6.000000000043E-02); +#166764 = AXIS2_PLACEMENT_3D('',#166765,#166766,#166767); +#166765 = CARTESIAN_POINT('',(112.60390822558,-102.8456,1.585)); +#166766 = DIRECTION('',(0.,0.,-1.)); +#166767 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166768 = ORIENTED_EDGE('',*,*,#166769,.T.); +#166769 = EDGE_CURVE('',#166761,#166742,#166770,.T.); +#166770 = LINE('',#166771,#166772); +#166771 = CARTESIAN_POINT('',(112.603908,-102.9056,1.585)); +#166772 = VECTOR('',#166773,1.); +#166773 = DIRECTION('',(-1.,0.,0.)); +#166774 = PLANE('',#166775); +#166775 = AXIS2_PLACEMENT_3D('',#166776,#166777,#166778); +#166776 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166777 = DIRECTION('',(0.,0.,1.)); +#166778 = DIRECTION('',(1.,0.,-0.)); +#166779 = SHELL_BASED_SURFACE_MODEL('',(#166780)); +#166780 = OPEN_SHELL('',(#166781)); +#166781 = ADVANCED_FACE('',(#166782),#166818,.T.); +#166782 = FACE_BOUND('',#166783,.F.); +#166783 = EDGE_LOOP('',(#166784,#166795,#166803,#166812)); +#166784 = ORIENTED_EDGE('',*,*,#166785,.T.); +#166785 = EDGE_CURVE('',#166786,#166788,#166790,.T.); +#166786 = VERTEX_POINT('',#166787); +#166787 = CARTESIAN_POINT('',(179.279392,-102.9056,1.585)); +#166788 = VERTEX_POINT('',#166789); +#166789 = CARTESIAN_POINT('',(179.279392,-102.7856,1.585)); +#166790 = CIRCLE('',#166791,6.000000000043E-02); +#166791 = AXIS2_PLACEMENT_3D('',#166792,#166793,#166794); +#166792 = CARTESIAN_POINT('',(179.27939177441,-102.8456,1.585)); +#166793 = DIRECTION('',(0.,0.,-1.)); +#166794 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#166795 = ORIENTED_EDGE('',*,*,#166796,.T.); +#166796 = EDGE_CURVE('',#166788,#166797,#166799,.T.); +#166797 = VERTEX_POINT('',#166798); +#166798 = CARTESIAN_POINT('',(179.753908,-102.7856,1.585)); +#166799 = LINE('',#166800,#166801); +#166800 = CARTESIAN_POINT('',(179.279392,-102.7856,1.585)); +#166801 = VECTOR('',#166802,1.); +#166802 = DIRECTION('',(1.,0.,0.)); +#166803 = ORIENTED_EDGE('',*,*,#166804,.T.); +#166804 = EDGE_CURVE('',#166797,#166805,#166807,.T.); +#166805 = VERTEX_POINT('',#166806); +#166806 = CARTESIAN_POINT('',(179.753908,-102.9056,1.585)); +#166807 = CIRCLE('',#166808,6.000000000042E-02); +#166808 = AXIS2_PLACEMENT_3D('',#166809,#166810,#166811); +#166809 = CARTESIAN_POINT('',(179.75390822558,-102.8456,1.585)); +#166810 = DIRECTION('',(0.,0.,-1.)); +#166811 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#166812 = ORIENTED_EDGE('',*,*,#166813,.T.); +#166813 = EDGE_CURVE('',#166805,#166786,#166814,.T.); +#166814 = LINE('',#166815,#166816); +#166815 = CARTESIAN_POINT('',(179.753908,-102.9056,1.585)); +#166816 = VECTOR('',#166817,1.); +#166817 = DIRECTION('',(-1.,0.,0.)); +#166818 = PLANE('',#166819); +#166819 = AXIS2_PLACEMENT_3D('',#166820,#166821,#166822); +#166820 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166821 = DIRECTION('',(0.,0.,1.)); +#166822 = DIRECTION('',(1.,0.,-0.)); +#166823 = SHELL_BASED_SURFACE_MODEL('',(#166824)); +#166824 = OPEN_SHELL('',(#166825)); +#166825 = ADVANCED_FACE('',(#166826),#166894,.T.); +#166826 = FACE_BOUND('',#166827,.F.); +#166827 = EDGE_LOOP('',(#166828,#166839,#166847,#166855,#166863,#166871, + #166880,#166888)); +#166828 = ORIENTED_EDGE('',*,*,#166829,.T.); +#166829 = EDGE_CURVE('',#166830,#166832,#166834,.T.); +#166830 = VERTEX_POINT('',#166831); +#166831 = CARTESIAN_POINT('',(165.64165,-100.7331,1.585)); +#166832 = VERTEX_POINT('',#166833); +#166833 = CARTESIAN_POINT('',(165.64165,-100.6131,1.585)); +#166834 = CIRCLE('',#166835,6.000000000042E-02); +#166835 = AXIS2_PLACEMENT_3D('',#166836,#166837,#166838); +#166836 = CARTESIAN_POINT('',(165.64164977441,-100.6731,1.585)); +#166837 = DIRECTION('',(0.,0.,-1.)); +#166838 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#166839 = ORIENTED_EDGE('',*,*,#166840,.T.); +#166840 = EDGE_CURVE('',#166832,#166841,#166843,.T.); +#166841 = VERTEX_POINT('',#166842); +#166842 = CARTESIAN_POINT('',(169.74165,-100.6131,1.585)); +#166843 = LINE('',#166844,#166845); +#166844 = CARTESIAN_POINT('',(165.64165,-100.6131,1.585)); +#166845 = VECTOR('',#166846,1.); +#166846 = DIRECTION('',(1.,0.,0.)); +#166847 = ORIENTED_EDGE('',*,*,#166848,.T.); +#166848 = EDGE_CURVE('',#166841,#166849,#166851,.T.); +#166849 = VERTEX_POINT('',#166850); +#166850 = CARTESIAN_POINT('',(169.764611,-100.617667,1.585)); +#166851 = LINE('',#166852,#166853); +#166852 = CARTESIAN_POINT('',(169.74165,-100.6131,1.585)); +#166853 = VECTOR('',#166854,1.); +#166854 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#166855 = ORIENTED_EDGE('',*,*,#166856,.T.); +#166856 = EDGE_CURVE('',#166849,#166857,#166859,.T.); +#166857 = VERTEX_POINT('',#166858); +#166858 = CARTESIAN_POINT('',(169.784076,-100.630674,1.585)); +#166859 = LINE('',#166860,#166861); +#166860 = CARTESIAN_POINT('',(169.764611,-100.617667,1.585)); +#166861 = VECTOR('',#166862,1.); +#166862 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#166863 = ORIENTED_EDGE('',*,*,#166864,.T.); +#166864 = EDGE_CURVE('',#166857,#166865,#166867,.T.); +#166865 = VERTEX_POINT('',#166866); +#166866 = CARTESIAN_POINT('',(171.884076,-102.730673,1.585)); +#166867 = LINE('',#166868,#166869); +#166868 = CARTESIAN_POINT('',(169.784076,-100.630674,1.585)); +#166869 = VECTOR('',#166870,1.); +#166870 = DIRECTION('',(0.707106949545,-0.707106612828,0.)); +#166871 = ORIENTED_EDGE('',*,*,#166872,.T.); +#166872 = EDGE_CURVE('',#166865,#166873,#166875,.T.); +#166873 = VERTEX_POINT('',#166874); +#166874 = CARTESIAN_POINT('',(171.799223,-102.815526,1.585)); +#166875 = CIRCLE('',#166876,6.000013170922E-02); +#166876 = AXIS2_PLACEMENT_3D('',#166877,#166878,#166879); +#166877 = CARTESIAN_POINT('',(171.8416500587,-102.7731000587,1.585)); +#166878 = DIRECTION('',(0.,0.,-1.)); +#166879 = DIRECTION('',(0.707097469327,0.707116092923,0.)); +#166880 = ORIENTED_EDGE('',*,*,#166881,.T.); +#166881 = EDGE_CURVE('',#166873,#166882,#166884,.T.); +#166882 = VERTEX_POINT('',#166883); +#166883 = CARTESIAN_POINT('',(169.716798,-100.7331,1.585)); +#166884 = LINE('',#166885,#166886); +#166885 = CARTESIAN_POINT('',(171.799223,-102.815526,1.585)); +#166886 = VECTOR('',#166887,1.); +#166887 = DIRECTION('',(-0.707106611407,0.707106950966,0.)); +#166888 = ORIENTED_EDGE('',*,*,#166889,.T.); +#166889 = EDGE_CURVE('',#166882,#166830,#166890,.T.); +#166890 = LINE('',#166891,#166892); +#166891 = CARTESIAN_POINT('',(169.716798,-100.7331,1.585)); +#166892 = VECTOR('',#166893,1.); +#166893 = DIRECTION('',(-1.,0.,0.)); +#166894 = PLANE('',#166895); +#166895 = AXIS2_PLACEMENT_3D('',#166896,#166897,#166898); +#166896 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166897 = DIRECTION('',(0.,0.,1.)); +#166898 = DIRECTION('',(1.,0.,-0.)); +#166899 = SHELL_BASED_SURFACE_MODEL('',(#166900)); +#166900 = OPEN_SHELL('',(#166901)); +#166901 = ADVANCED_FACE('',(#166902),#167036,.T.); +#166902 = FACE_BOUND('',#166903,.F.); +#166903 = EDGE_LOOP('',(#166904,#166915,#166923,#166932,#166940,#166948, + #166956,#166964,#166973,#166981,#166989,#166997,#167006,#167014, + #167022,#167030)); +#166904 = ORIENTED_EDGE('',*,*,#166905,.T.); +#166905 = EDGE_CURVE('',#166906,#166908,#166910,.T.); +#166906 = VERTEX_POINT('',#166907); +#166907 = CARTESIAN_POINT('',(200.784801,-101.948835,1.585)); +#166908 = VERTEX_POINT('',#166909); +#166909 = CARTESIAN_POINT('',(200.901469,-102.011195,1.585)); +#166910 = CIRCLE('',#166911,7.500000000004E-02); +#166911 = AXIS2_PLACEMENT_3D('',#166912,#166913,#166914); +#166912 = CARTESIAN_POINT('',(200.826469,-102.0111950655,1.585)); +#166913 = DIRECTION('',(0.,0.,-1.)); +#166914 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#166915 = ORIENTED_EDGE('',*,*,#166916,.T.); +#166916 = EDGE_CURVE('',#166908,#166917,#166919,.T.); +#166917 = VERTEX_POINT('',#166918); +#166918 = CARTESIAN_POINT('',(200.900028,-102.597255,1.585)); +#166919 = LINE('',#166920,#166921); +#166920 = CARTESIAN_POINT('',(200.901469,-102.011195,1.585)); +#166921 = VECTOR('',#166922,1.); +#166922 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#166923 = ORIENTED_EDGE('',*,*,#166924,.T.); +#166924 = EDGE_CURVE('',#166917,#166925,#166927,.T.); +#166925 = VERTEX_POINT('',#166926); +#166926 = CARTESIAN_POINT('',(200.751469,-102.582623,1.585)); +#166927 = CIRCLE('',#166928,7.500006711464E-02); +#166928 = AXIS2_PLACEMENT_3D('',#166929,#166930,#166931); +#166929 = CARTESIAN_POINT('',(200.82646906711,-102.5826230671,1.585)); +#166930 = DIRECTION('',(-0.,0.,-1.)); +#166931 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#166932 = ORIENTED_EDGE('',*,*,#166933,.T.); +#166933 = EDGE_CURVE('',#166925,#166934,#166936,.T.); +#166934 = VERTEX_POINT('',#166935); +#166935 = CARTESIAN_POINT('',(200.751469,-102.371909,1.585)); +#166936 = LINE('',#166937,#166938); +#166937 = CARTESIAN_POINT('',(200.751469,-102.582623,1.585)); +#166938 = VECTOR('',#166939,1.); +#166939 = DIRECTION('',(0.,1.,0.)); +#166940 = ORIENTED_EDGE('',*,*,#166941,.T.); +#166941 = EDGE_CURVE('',#166934,#166942,#166944,.T.); +#166942 = VERTEX_POINT('',#166943); +#166943 = CARTESIAN_POINT('',(200.055154,-102.371909,1.585)); +#166944 = LINE('',#166945,#166946); +#166945 = CARTESIAN_POINT('',(200.751469,-102.371909,1.585)); +#166946 = VECTOR('',#166947,1.); +#166947 = DIRECTION('',(-1.,0.,0.)); +#166948 = ORIENTED_EDGE('',*,*,#166949,.T.); +#166949 = EDGE_CURVE('',#166942,#166950,#166952,.T.); +#166950 = VERTEX_POINT('',#166951); +#166951 = CARTESIAN_POINT('',(200.127683,-102.447549,1.585)); +#166952 = LINE('',#166953,#166954); +#166953 = CARTESIAN_POINT('',(200.055154,-102.371909,1.585)); +#166954 = VECTOR('',#166955,1.); +#166955 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#166956 = ORIENTED_EDGE('',*,*,#166957,.T.); +#166957 = EDGE_CURVE('',#166950,#166958,#166960,.T.); +#166958 = VERTEX_POINT('',#166959); +#166959 = CARTESIAN_POINT('',(200.18452,-102.562813,1.585)); +#166960 = LINE('',#166961,#166962); +#166961 = CARTESIAN_POINT('',(200.127683,-102.447549,1.585)); +#166962 = VECTOR('',#166963,1.); +#166963 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#166964 = ORIENTED_EDGE('',*,*,#166965,.T.); +#166965 = EDGE_CURVE('',#166958,#166966,#166968,.T.); +#166966 = VERTEX_POINT('',#166967); +#166967 = CARTESIAN_POINT('',(200.045101,-102.616164,1.585)); +#166968 = CIRCLE('',#166969,7.500029440469E-02); +#166969 = AXIS2_PLACEMENT_3D('',#166970,#166971,#166972); +#166970 = CARTESIAN_POINT('',(200.11218305397,-102.5826223513,1.585)); +#166971 = DIRECTION('',(0.,0.,-1.)); +#166972 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#166973 = ORIENTED_EDGE('',*,*,#166974,.T.); +#166974 = EDGE_CURVE('',#166966,#166975,#166977,.T.); +#166975 = VERTEX_POINT('',#166976); +#166976 = CARTESIAN_POINT('',(200.002925,-102.531812,1.585)); +#166977 = LINE('',#166978,#166979); +#166978 = CARTESIAN_POINT('',(200.045101,-102.616164,1.585)); +#166979 = VECTOR('',#166980,1.); +#166980 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#166981 = ORIENTED_EDGE('',*,*,#166982,.T.); +#166982 = EDGE_CURVE('',#166975,#166983,#166985,.T.); +#166983 = VERTEX_POINT('',#166984); +#166984 = CARTESIAN_POINT('',(199.921544,-102.450431,1.585)); +#166985 = LINE('',#166986,#166987); +#166986 = CARTESIAN_POINT('',(200.002925,-102.531812,1.585)); +#166987 = VECTOR('',#166988,1.); +#166988 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#166989 = ORIENTED_EDGE('',*,*,#166990,.T.); +#166990 = EDGE_CURVE('',#166983,#166991,#166993,.T.); +#166991 = VERTEX_POINT('',#166992); +#166992 = CARTESIAN_POINT('',(199.773491,-102.349997,1.585)); +#166993 = LINE('',#166994,#166995); +#166994 = CARTESIAN_POINT('',(199.921544,-102.450431,1.585)); +#166995 = VECTOR('',#166996,1.); +#166996 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#166997 = ORIENTED_EDGE('',*,*,#166998,.T.); +#166998 = EDGE_CURVE('',#166991,#166999,#167001,.T.); +#166999 = VERTEX_POINT('',#167000); +#167000 = CARTESIAN_POINT('',(199.826469,-102.221909,1.585)); +#167001 = CIRCLE('',#167002,7.499993751709E-02); +#167002 = AXIS2_PLACEMENT_3D('',#167003,#167004,#167005); +#167003 = CARTESIAN_POINT('',(199.82646880902,-102.2969089375,1.585)); +#167004 = DIRECTION('',(0.,0.,-1.)); +#167005 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#167006 = ORIENTED_EDGE('',*,*,#167007,.T.); +#167007 = EDGE_CURVE('',#166999,#167008,#167010,.T.); +#167008 = VERTEX_POINT('',#167009); +#167009 = CARTESIAN_POINT('',(200.751469,-102.221909,1.585)); +#167010 = LINE('',#167011,#167012); +#167011 = CARTESIAN_POINT('',(199.826469,-102.221909,1.585)); +#167012 = VECTOR('',#167013,1.); +#167013 = DIRECTION('',(1.,0.,0.)); +#167014 = ORIENTED_EDGE('',*,*,#167015,.T.); +#167015 = EDGE_CURVE('',#167008,#167016,#167018,.T.); +#167016 = VERTEX_POINT('',#167017); +#167017 = CARTESIAN_POINT('',(200.75291,-101.996563,1.585)); +#167018 = LINE('',#167019,#167020); +#167019 = CARTESIAN_POINT('',(200.751469,-102.221909,1.585)); +#167020 = VECTOR('',#167021,1.); +#167021 = DIRECTION('',(6.394480216781E-03,0.999979555102,0.)); +#167022 = ORIENTED_EDGE('',*,*,#167023,.T.); +#167023 = EDGE_CURVE('',#167016,#167024,#167026,.T.); +#167024 = VERTEX_POINT('',#167025); +#167025 = CARTESIAN_POINT('',(200.764109,-101.969527,1.585)); +#167026 = LINE('',#167027,#167028); +#167027 = CARTESIAN_POINT('',(200.75291,-101.996563,1.585)); +#167028 = VECTOR('',#167029,1.); +#167029 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#167030 = ORIENTED_EDGE('',*,*,#167031,.T.); +#167031 = EDGE_CURVE('',#167024,#166906,#167032,.T.); +#167032 = LINE('',#167033,#167034); +#167033 = CARTESIAN_POINT('',(200.764109,-101.969527,1.585)); +#167034 = VECTOR('',#167035,1.); +#167035 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#167036 = PLANE('',#167037); +#167037 = AXIS2_PLACEMENT_3D('',#167038,#167039,#167040); +#167038 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167039 = DIRECTION('',(0.,0.,1.)); +#167040 = DIRECTION('',(1.,0.,-0.)); +#167041 = SHELL_BASED_SURFACE_MODEL('',(#167042)); +#167042 = OPEN_SHELL('',(#167043)); +#167043 = ADVANCED_FACE('',(#167044),#167203,.T.); +#167044 = FACE_BOUND('',#167045,.F.); +#167045 = EDGE_LOOP('',(#167046,#167057,#167065,#167073,#167081,#167089, + #167097,#167105,#167114,#167122,#167131,#167139,#167147,#167155, + #167164,#167172,#167180,#167188,#167197)); +#167046 = ORIENTED_EDGE('',*,*,#167047,.T.); +#167047 = EDGE_CURVE('',#167048,#167050,#167052,.T.); +#167048 = VERTEX_POINT('',#167049); +#167049 = CARTESIAN_POINT('',(121.371204,-101.458456,1.585)); +#167050 = VERTEX_POINT('',#167051); +#167051 = CARTESIAN_POINT('',(121.880599,-101.467786,1.585)); +#167052 = CIRCLE('',#167053,0.450326844012); +#167053 = AXIS2_PLACEMENT_3D('',#167054,#167055,#167056); +#167054 = CARTESIAN_POINT('',(121.6191010301,-101.8344098919,1.585)); +#167055 = DIRECTION('',(0.,0.,-1.)); +#167056 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#167057 = ORIENTED_EDGE('',*,*,#167058,.T.); +#167058 = EDGE_CURVE('',#167050,#167059,#167061,.T.); +#167059 = VERTEX_POINT('',#167060); +#167060 = CARTESIAN_POINT('',(121.944052,-101.533316,1.585)); +#167061 = LINE('',#167062,#167063); +#167062 = CARTESIAN_POINT('',(121.880599,-101.467786,1.585)); +#167063 = VECTOR('',#167064,1.); +#167064 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#167065 = ORIENTED_EDGE('',*,*,#167066,.T.); +#167066 = EDGE_CURVE('',#167059,#167067,#167069,.T.); +#167067 = VERTEX_POINT('',#167068); +#167068 = CARTESIAN_POINT('',(122.002113,-101.653763,1.585)); +#167069 = LINE('',#167070,#167071); +#167070 = CARTESIAN_POINT('',(121.944052,-101.533316,1.585)); +#167071 = VECTOR('',#167072,1.); +#167072 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#167073 = ORIENTED_EDGE('',*,*,#167074,.T.); +#167074 = EDGE_CURVE('',#167067,#167075,#167077,.T.); +#167075 = VERTEX_POINT('',#167076); +#167076 = CARTESIAN_POINT('',(122.001354,-101.780095,1.585)); +#167077 = LINE('',#167078,#167079); +#167078 = CARTESIAN_POINT('',(122.002113,-101.653763,1.585)); +#167079 = VECTOR('',#167080,1.); +#167080 = DIRECTION('',(-6.007870547433E-03,-0.999981952583,0.)); +#167081 = ORIENTED_EDGE('',*,*,#167082,.T.); +#167082 = EDGE_CURVE('',#167075,#167083,#167085,.T.); +#167083 = VERTEX_POINT('',#167084); +#167084 = CARTESIAN_POINT('',(121.943296,-101.948158,1.585)); +#167085 = LINE('',#167086,#167087); +#167086 = CARTESIAN_POINT('',(122.001354,-101.780095,1.585)); +#167087 = VECTOR('',#167088,1.); +#167088 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#167089 = ORIENTED_EDGE('',*,*,#167090,.T.); +#167090 = EDGE_CURVE('',#167083,#167091,#167093,.T.); +#167091 = VERTEX_POINT('',#167092); +#167092 = CARTESIAN_POINT('',(121.490573,-102.402919,1.585)); +#167093 = LINE('',#167094,#167095); +#167094 = CARTESIAN_POINT('',(121.943296,-101.948158,1.585)); +#167095 = VECTOR('',#167096,1.); +#167096 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#167097 = ORIENTED_EDGE('',*,*,#167098,.T.); +#167098 = EDGE_CURVE('',#167091,#167099,#167101,.T.); +#167099 = VERTEX_POINT('',#167100); +#167100 = CARTESIAN_POINT('',(121.943186,-102.40436,1.585)); +#167101 = LINE('',#167102,#167103); +#167102 = CARTESIAN_POINT('',(121.490573,-102.402919,1.585)); +#167103 = VECTOR('',#167104,1.); +#167104 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#167105 = ORIENTED_EDGE('',*,*,#167106,.T.); +#167106 = EDGE_CURVE('',#167099,#167107,#167109,.T.); +#167107 = VERTEX_POINT('',#167108); +#167108 = CARTESIAN_POINT('',(121.928554,-102.552919,1.585)); +#167109 = CIRCLE('',#167110,7.500006711465E-02); +#167110 = AXIS2_PLACEMENT_3D('',#167111,#167112,#167113); +#167111 = CARTESIAN_POINT('',(121.92855406711,-102.4779189328,1.585)); +#167112 = DIRECTION('',(0.,0.,-1.)); +#167113 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#167114 = ORIENTED_EDGE('',*,*,#167115,.T.); +#167115 = EDGE_CURVE('',#167107,#167116,#167118,.T.); +#167116 = VERTEX_POINT('',#167117); +#167117 = CARTESIAN_POINT('',(121.294875,-102.551478,1.585)); +#167118 = LINE('',#167119,#167120); +#167119 = CARTESIAN_POINT('',(121.928554,-102.552919,1.585)); +#167120 = VECTOR('',#167121,1.); +#167121 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#167122 = ORIENTED_EDGE('',*,*,#167123,.T.); +#167123 = EDGE_CURVE('',#167116,#167124,#167126,.T.); +#167124 = VERTEX_POINT('',#167125); +#167125 = CARTESIAN_POINT('',(121.256474,-102.424886,1.585)); +#167126 = CIRCLE('',#167127,7.50002101311E-02); +#167127 = AXIS2_PLACEMENT_3D('',#167128,#167129,#167130); +#167128 = CARTESIAN_POINT('',(121.3095073167,-102.4779189976,1.585)); +#167129 = DIRECTION('',(0.,0.,-1.)); +#167130 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#167131 = ORIENTED_EDGE('',*,*,#167132,.T.); +#167132 = EDGE_CURVE('',#167124,#167133,#167135,.T.); +#167133 = VERTEX_POINT('',#167134); +#167134 = CARTESIAN_POINT('',(121.815382,-101.865976,1.585)); +#167135 = LINE('',#167136,#167137); +#167136 = CARTESIAN_POINT('',(121.256474,-102.424886,1.585)); +#167137 = VECTOR('',#167138,1.); +#167138 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#167139 = ORIENTED_EDGE('',*,*,#167140,.T.); +#167140 = EDGE_CURVE('',#167133,#167141,#167143,.T.); +#167141 = VERTEX_POINT('',#167142); +#167142 = CARTESIAN_POINT('',(121.853554,-101.751463,1.585)); +#167143 = LINE('',#167144,#167145); +#167144 = CARTESIAN_POINT('',(121.815382,-101.865976,1.585)); +#167145 = VECTOR('',#167146,1.); +#167146 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#167147 = ORIENTED_EDGE('',*,*,#167148,.T.); +#167148 = EDGE_CURVE('',#167141,#167149,#167151,.T.); +#167149 = VERTEX_POINT('',#167150); +#167150 = CARTESIAN_POINT('',(121.853554,-101.6861,1.585)); +#167151 = LINE('',#167152,#167153); +#167152 = CARTESIAN_POINT('',(121.853554,-101.751463,1.585)); +#167153 = VECTOR('',#167154,1.); +#167154 = DIRECTION('',(0.,1.,0.)); +#167155 = ORIENTED_EDGE('',*,*,#167156,.T.); +#167156 = EDGE_CURVE('',#167149,#167157,#167159,.T.); +#167157 = VERTEX_POINT('',#167158); +#167158 = CARTESIAN_POINT('',(121.720373,-101.552919,1.585)); +#167159 = CIRCLE('',#167160,0.18686440374); +#167160 = AXIS2_PLACEMENT_3D('',#167161,#167162,#167163); +#167161 = CARTESIAN_POINT('',(121.672837,-101.733636,1.585)); +#167162 = DIRECTION('',(0.,0.,1.)); +#167163 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#167164 = ORIENTED_EDGE('',*,*,#167165,.T.); +#167165 = EDGE_CURVE('',#167157,#167166,#167168,.T.); +#167166 = VERTEX_POINT('',#167167); +#167167 = CARTESIAN_POINT('',(121.517688,-101.552919,1.585)); +#167168 = LINE('',#167169,#167170); +#167169 = CARTESIAN_POINT('',(121.720373,-101.552919,1.585)); +#167170 = VECTOR('',#167171,1.); +#167171 = DIRECTION('',(-1.,0.,0.)); +#167172 = ORIENTED_EDGE('',*,*,#167173,.T.); +#167173 = EDGE_CURVE('',#167166,#167174,#167176,.T.); +#167174 = VERTEX_POINT('',#167175); +#167175 = CARTESIAN_POINT('',(121.449172,-101.587177,1.585)); +#167176 = LINE('',#167177,#167178); +#167177 = CARTESIAN_POINT('',(121.517688,-101.552919,1.585)); +#167178 = VECTOR('',#167179,1.); +#167179 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#167180 = ORIENTED_EDGE('',*,*,#167181,.T.); +#167181 = EDGE_CURVE('',#167174,#167182,#167184,.T.); +#167182 = VERTEX_POINT('',#167183); +#167183 = CARTESIAN_POINT('',(121.398794,-101.635517,1.585)); +#167184 = LINE('',#167185,#167186); +#167185 = CARTESIAN_POINT('',(121.449172,-101.587177,1.585)); +#167186 = VECTOR('',#167187,1.); +#167187 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#167188 = ORIENTED_EDGE('',*,*,#167189,.T.); +#167189 = EDGE_CURVE('',#167182,#167190,#167192,.T.); +#167190 = VERTEX_POINT('',#167191); +#167191 = CARTESIAN_POINT('',(121.304093,-101.520124,1.585)); +#167192 = CIRCLE('',#167193,7.499996838527E-02); +#167193 = AXIS2_PLACEMENT_3D('',#167194,#167195,#167196); +#167194 = CARTESIAN_POINT('',(121.357126,-101.5731569724,1.585)); +#167195 = DIRECTION('',(0.,0.,-1.)); +#167196 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#167197 = ORIENTED_EDGE('',*,*,#167198,.T.); +#167198 = EDGE_CURVE('',#167190,#167048,#167199,.T.); +#167199 = LINE('',#167200,#167201); +#167200 = CARTESIAN_POINT('',(121.304093,-101.520124,1.585)); +#167201 = VECTOR('',#167202,1.); +#167202 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#167203 = PLANE('',#167204); +#167204 = AXIS2_PLACEMENT_3D('',#167205,#167206,#167207); +#167205 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167206 = DIRECTION('',(0.,0.,1.)); +#167207 = DIRECTION('',(1.,0.,-0.)); +#167208 = SHELL_BASED_SURFACE_MODEL('',(#167209)); +#167209 = OPEN_SHELL('',(#167210)); +#167210 = ADVANCED_FACE('',(#167211),#167396,.T.); +#167211 = FACE_BOUND('',#167212,.F.); +#167212 = EDGE_LOOP('',(#167213,#167224,#167232,#167241,#167249,#167258, + #167266,#167275,#167283,#167291,#167299,#167308,#167316,#167325, + #167333,#167342,#167350,#167358,#167366,#167374,#167382,#167390)); +#167213 = ORIENTED_EDGE('',*,*,#167214,.T.); +#167214 = EDGE_CURVE('',#167215,#167217,#167219,.T.); +#167215 = VERTEX_POINT('',#167216); +#167216 = CARTESIAN_POINT('',(119.558078,-101.460381,1.585)); +#167217 = VERTEX_POINT('',#167218); +#167218 = CARTESIAN_POINT('',(120.017841,-101.463178,1.585)); +#167219 = CIRCLE('',#167220,0.460785175821); +#167220 = AXIS2_PLACEMENT_3D('',#167221,#167222,#167223); +#167221 = CARTESIAN_POINT('',(119.78553010897,-101.8611159702,1.585)); +#167222 = DIRECTION('',(0.,0.,-1.)); +#167223 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#167224 = ORIENTED_EDGE('',*,*,#167225,.T.); +#167225 = EDGE_CURVE('',#167217,#167226,#167228,.T.); +#167226 = VERTEX_POINT('',#167227); +#167227 = CARTESIAN_POINT('',(120.086152,-101.531489,1.585)); +#167228 = LINE('',#167229,#167230); +#167229 = CARTESIAN_POINT('',(120.017841,-101.463178,1.585)); +#167230 = VECTOR('',#167231,1.); +#167231 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#167232 = ORIENTED_EDGE('',*,*,#167233,.T.); +#167233 = EDGE_CURVE('',#167226,#167234,#167236,.T.); +#167234 = VERTEX_POINT('',#167235); +#167235 = CARTESIAN_POINT('',(119.970759,-101.62619,1.585)); +#167236 = CIRCLE('',#167237,7.500003178655E-02); +#167237 = AXIS2_PLACEMENT_3D('',#167238,#167239,#167240); +#167238 = CARTESIAN_POINT('',(120.02379156212,-101.5731565,1.585)); +#167239 = DIRECTION('',(0.,0.,-1.)); +#167240 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#167241 = ORIENTED_EDGE('',*,*,#167242,.T.); +#167242 = EDGE_CURVE('',#167234,#167243,#167245,.T.); +#167243 = VERTEX_POINT('',#167244); +#167244 = CARTESIAN_POINT('',(119.935659,-101.59109,1.585)); +#167245 = LINE('',#167246,#167247); +#167246 = CARTESIAN_POINT('',(119.970759,-101.62619,1.585)); +#167247 = VECTOR('',#167248,1.); +#167248 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#167249 = ORIENTED_EDGE('',*,*,#167250,.T.); +#167250 = EDGE_CURVE('',#167243,#167251,#167253,.T.); +#167251 = VERTEX_POINT('',#167252); +#167252 = CARTESIAN_POINT('',(119.635735,-101.59109,1.585)); +#167253 = CIRCLE('',#167254,0.299308637371); +#167254 = AXIS2_PLACEMENT_3D('',#167255,#167256,#167257); +#167255 = CARTESIAN_POINT('',(119.785697,-101.850121,1.585)); +#167256 = DIRECTION('',(0.,0.,1.)); +#167257 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#167258 = ORIENTED_EDGE('',*,*,#167259,.T.); +#167259 = EDGE_CURVE('',#167251,#167260,#167262,.T.); +#167260 = VERTEX_POINT('',#167261); +#167261 = CARTESIAN_POINT('',(119.561622,-101.665203,1.585)); +#167262 = LINE('',#167263,#167264); +#167263 = CARTESIAN_POINT('',(119.635735,-101.59109,1.585)); +#167264 = VECTOR('',#167265,1.); +#167265 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#167266 = ORIENTED_EDGE('',*,*,#167267,.T.); +#167267 = EDGE_CURVE('',#167260,#167268,#167270,.T.); +#167268 = VERTEX_POINT('',#167269); +#167269 = CARTESIAN_POINT('',(119.479745,-102.040113,1.585)); +#167270 = CIRCLE('',#167271,0.611712714363); +#167271 = AXIS2_PLACEMENT_3D('',#167272,#167273,#167274); +#167272 = CARTESIAN_POINT('',(120.08815027521,-101.9765876822,1.585)); +#167273 = DIRECTION('',(0.,0.,1.)); +#167274 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#167275 = ORIENTED_EDGE('',*,*,#167276,.T.); +#167276 = EDGE_CURVE('',#167268,#167277,#167279,.T.); +#167277 = VERTEX_POINT('',#167278); +#167278 = CARTESIAN_POINT('',(119.523128,-102.213647,1.585)); +#167279 = LINE('',#167280,#167281); +#167280 = CARTESIAN_POINT('',(119.479745,-102.040113,1.585)); +#167281 = VECTOR('',#167282,1.); +#167282 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#167283 = ORIENTED_EDGE('',*,*,#167284,.T.); +#167284 = EDGE_CURVE('',#167277,#167285,#167287,.T.); +#167285 = VERTEX_POINT('',#167286); +#167286 = CARTESIAN_POINT('',(119.561622,-102.290634,1.585)); +#167287 = LINE('',#167288,#167289); +#167288 = CARTESIAN_POINT('',(119.523128,-102.213647,1.585)); +#167289 = VECTOR('',#167290,1.); +#167290 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#167291 = ORIENTED_EDGE('',*,*,#167292,.T.); +#167292 = EDGE_CURVE('',#167285,#167293,#167295,.T.); +#167293 = VERTEX_POINT('',#167294); +#167294 = CARTESIAN_POINT('',(119.635735,-102.364748,1.585)); +#167295 = LINE('',#167296,#167297); +#167296 = CARTESIAN_POINT('',(119.561622,-102.290634,1.585)); +#167297 = VECTOR('',#167298,1.); +#167298 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#167299 = ORIENTED_EDGE('',*,*,#167300,.T.); +#167300 = EDGE_CURVE('',#167293,#167301,#167303,.T.); +#167301 = VERTEX_POINT('',#167302); +#167302 = CARTESIAN_POINT('',(119.935659,-102.364747,1.585)); +#167303 = CIRCLE('',#167304,0.299305962385); +#167304 = AXIS2_PLACEMENT_3D('',#167305,#167306,#167307); +#167305 = CARTESIAN_POINT('',(119.78569613635,-102.1057195909,1.585)); +#167306 = DIRECTION('',(0.,0.,1.)); +#167307 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#167308 = ORIENTED_EDGE('',*,*,#167309,.T.); +#167309 = EDGE_CURVE('',#167301,#167310,#167312,.T.); +#167310 = VERTEX_POINT('',#167311); +#167311 = CARTESIAN_POINT('',(119.982124,-102.32032,1.585)); +#167312 = LINE('',#167313,#167314); +#167313 = CARTESIAN_POINT('',(119.935659,-102.364747,1.585)); +#167314 = VECTOR('',#167315,1.); +#167315 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#167316 = ORIENTED_EDGE('',*,*,#167317,.T.); +#167317 = EDGE_CURVE('',#167310,#167318,#167320,.T.); +#167318 = VERTEX_POINT('',#167319); +#167319 = CARTESIAN_POINT('',(120.076825,-102.435713,1.585)); +#167320 = CIRCLE('',#167321,7.499993690112E-02); +#167321 = AXIS2_PLACEMENT_3D('',#167322,#167323,#167324); +#167322 = CARTESIAN_POINT('',(120.0237922483,-102.3826798237,1.585)); +#167323 = DIRECTION('',(0.,0.,-1.)); +#167324 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#167325 = ORIENTED_EDGE('',*,*,#167326,.T.); +#167326 = EDGE_CURVE('',#167318,#167327,#167329,.T.); +#167327 = VERTEX_POINT('',#167328); +#167328 = CARTESIAN_POINT('',(120.013315,-102.495457,1.585)); +#167329 = LINE('',#167330,#167331); +#167330 = CARTESIAN_POINT('',(120.076825,-102.435713,1.585)); +#167331 = VECTOR('',#167332,1.); +#167332 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#167333 = ORIENTED_EDGE('',*,*,#167334,.T.); +#167334 = EDGE_CURVE('',#167327,#167335,#167337,.T.); +#167335 = VERTEX_POINT('',#167336); +#167336 = CARTESIAN_POINT('',(119.553553,-102.492661,1.585)); +#167337 = CIRCLE('',#167338,0.461067828848); +#167338 = AXIS2_PLACEMENT_3D('',#167339,#167340,#167341); +#167339 = CARTESIAN_POINT('',(119.78586451268,-102.0943961335,1.585)); +#167340 = DIRECTION('',(-0.,0.,-1.)); +#167341 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#167342 = ORIENTED_EDGE('',*,*,#167343,.T.); +#167343 = EDGE_CURVE('',#167335,#167344,#167346,.T.); +#167344 = VERTEX_POINT('',#167345); +#167345 = CARTESIAN_POINT('',(119.436864,-102.374898,1.585)); +#167346 = LINE('',#167347,#167348); +#167347 = CARTESIAN_POINT('',(119.553553,-102.492661,1.585)); +#167348 = VECTOR('',#167349,1.); +#167349 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#167350 = ORIENTED_EDGE('',*,*,#167351,.T.); +#167351 = EDGE_CURVE('',#167344,#167352,#167354,.T.); +#167352 = VERTEX_POINT('',#167353); +#167353 = CARTESIAN_POINT('',(119.379603,-102.258013,1.585)); +#167354 = LINE('',#167355,#167356); +#167355 = CARTESIAN_POINT('',(119.436864,-102.374898,1.585)); +#167356 = VECTOR('',#167357,1.); +#167357 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#167358 = ORIENTED_EDGE('',*,*,#167359,.T.); +#167359 = EDGE_CURVE('',#167352,#167360,#167362,.T.); +#167360 = VERTEX_POINT('',#167361); +#167361 = CARTESIAN_POINT('',(119.329745,-102.049347,1.585)); +#167362 = LINE('',#167363,#167364); +#167363 = CARTESIAN_POINT('',(119.379603,-102.258013,1.585)); +#167364 = VECTOR('',#167365,1.); +#167365 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#167366 = ORIENTED_EDGE('',*,*,#167367,.T.); +#167367 = EDGE_CURVE('',#167360,#167368,#167370,.T.); +#167368 = VERTEX_POINT('',#167369); +#167369 = CARTESIAN_POINT('',(119.331984,-101.8883,1.585)); +#167370 = LINE('',#167371,#167372); +#167371 = CARTESIAN_POINT('',(119.329745,-102.049347,1.585)); +#167372 = VECTOR('',#167373,1.); +#167373 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#167374 = ORIENTED_EDGE('',*,*,#167375,.T.); +#167375 = EDGE_CURVE('',#167368,#167376,#167378,.T.); +#167376 = VERTEX_POINT('',#167377); +#167377 = CARTESIAN_POINT('',(119.385282,-101.682473,1.585)); +#167378 = LINE('',#167379,#167380); +#167379 = CARTESIAN_POINT('',(119.331984,-101.8883,1.585)); +#167380 = VECTOR('',#167381,1.); +#167381 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#167382 = ORIENTED_EDGE('',*,*,#167383,.T.); +#167383 = EDGE_CURVE('',#167376,#167384,#167386,.T.); +#167384 = VERTEX_POINT('',#167385); +#167385 = CARTESIAN_POINT('',(119.442231,-101.573492,1.585)); +#167386 = LINE('',#167387,#167388); +#167387 = CARTESIAN_POINT('',(119.385282,-101.682473,1.585)); +#167388 = VECTOR('',#167389,1.); +#167389 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#167390 = ORIENTED_EDGE('',*,*,#167391,.T.); +#167391 = EDGE_CURVE('',#167384,#167215,#167392,.T.); +#167392 = LINE('',#167393,#167394); +#167393 = CARTESIAN_POINT('',(119.442231,-101.573492,1.585)); +#167394 = VECTOR('',#167395,1.); +#167395 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#167396 = PLANE('',#167397); +#167397 = AXIS2_PLACEMENT_3D('',#167398,#167399,#167400); +#167398 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167399 = DIRECTION('',(0.,0.,1.)); +#167400 = DIRECTION('',(1.,0.,-0.)); +#167401 = SHELL_BASED_SURFACE_MODEL('',(#167402)); +#167402 = OPEN_SHELL('',(#167403)); +#167403 = ADVANCED_FACE('',(#167404),#167589,.T.); +#167404 = FACE_BOUND('',#167405,.F.); +#167405 = EDGE_LOOP('',(#167406,#167417,#167425,#167434,#167442,#167451, + #167459,#167468,#167476,#167484,#167492,#167501,#167509,#167518, + #167526,#167535,#167543,#167551,#167559,#167567,#167575,#167583)); +#167406 = ORIENTED_EDGE('',*,*,#167407,.T.); +#167407 = EDGE_CURVE('',#167408,#167410,#167412,.T.); +#167408 = VERTEX_POINT('',#167409); +#167409 = CARTESIAN_POINT('',(125.058078,-101.460381,1.585)); +#167410 = VERTEX_POINT('',#167411); +#167411 = CARTESIAN_POINT('',(125.517841,-101.463178,1.585)); +#167412 = CIRCLE('',#167413,0.460785175821); +#167413 = AXIS2_PLACEMENT_3D('',#167414,#167415,#167416); +#167414 = CARTESIAN_POINT('',(125.28553010897,-101.8611159702,1.585)); +#167415 = DIRECTION('',(0.,0.,-1.)); +#167416 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#167417 = ORIENTED_EDGE('',*,*,#167418,.T.); +#167418 = EDGE_CURVE('',#167410,#167419,#167421,.T.); +#167419 = VERTEX_POINT('',#167420); +#167420 = CARTESIAN_POINT('',(125.586152,-101.531489,1.585)); +#167421 = LINE('',#167422,#167423); +#167422 = CARTESIAN_POINT('',(125.517841,-101.463178,1.585)); +#167423 = VECTOR('',#167424,1.); +#167424 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#167425 = ORIENTED_EDGE('',*,*,#167426,.T.); +#167426 = EDGE_CURVE('',#167419,#167427,#167429,.T.); +#167427 = VERTEX_POINT('',#167428); +#167428 = CARTESIAN_POINT('',(125.470759,-101.62619,1.585)); +#167429 = CIRCLE('',#167430,7.500003178655E-02); +#167430 = AXIS2_PLACEMENT_3D('',#167431,#167432,#167433); +#167431 = CARTESIAN_POINT('',(125.52379156212,-101.5731565,1.585)); +#167432 = DIRECTION('',(0.,0.,-1.)); +#167433 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#167434 = ORIENTED_EDGE('',*,*,#167435,.T.); +#167435 = EDGE_CURVE('',#167427,#167436,#167438,.T.); +#167436 = VERTEX_POINT('',#167437); +#167437 = CARTESIAN_POINT('',(125.435659,-101.59109,1.585)); +#167438 = LINE('',#167439,#167440); +#167439 = CARTESIAN_POINT('',(125.470759,-101.62619,1.585)); +#167440 = VECTOR('',#167441,1.); +#167441 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#167442 = ORIENTED_EDGE('',*,*,#167443,.T.); +#167443 = EDGE_CURVE('',#167436,#167444,#167446,.T.); +#167444 = VERTEX_POINT('',#167445); +#167445 = CARTESIAN_POINT('',(125.135735,-101.59109,1.585)); +#167446 = CIRCLE('',#167447,0.299308637371); +#167447 = AXIS2_PLACEMENT_3D('',#167448,#167449,#167450); +#167448 = CARTESIAN_POINT('',(125.285697,-101.850121,1.585)); +#167449 = DIRECTION('',(0.,0.,1.)); +#167450 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#167451 = ORIENTED_EDGE('',*,*,#167452,.T.); +#167452 = EDGE_CURVE('',#167444,#167453,#167455,.T.); +#167453 = VERTEX_POINT('',#167454); +#167454 = CARTESIAN_POINT('',(125.061622,-101.665203,1.585)); +#167455 = LINE('',#167456,#167457); +#167456 = CARTESIAN_POINT('',(125.135735,-101.59109,1.585)); +#167457 = VECTOR('',#167458,1.); +#167458 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#167459 = ORIENTED_EDGE('',*,*,#167460,.T.); +#167460 = EDGE_CURVE('',#167453,#167461,#167463,.T.); +#167461 = VERTEX_POINT('',#167462); +#167462 = CARTESIAN_POINT('',(124.979745,-102.040113,1.585)); +#167463 = CIRCLE('',#167464,0.611712714363); +#167464 = AXIS2_PLACEMENT_3D('',#167465,#167466,#167467); +#167465 = CARTESIAN_POINT('',(125.58815027521,-101.9765876822,1.585)); +#167466 = DIRECTION('',(0.,0.,1.)); +#167467 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#167468 = ORIENTED_EDGE('',*,*,#167469,.T.); +#167469 = EDGE_CURVE('',#167461,#167470,#167472,.T.); +#167470 = VERTEX_POINT('',#167471); +#167471 = CARTESIAN_POINT('',(125.023128,-102.213647,1.585)); +#167472 = LINE('',#167473,#167474); +#167473 = CARTESIAN_POINT('',(124.979745,-102.040113,1.585)); +#167474 = VECTOR('',#167475,1.); +#167475 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#167476 = ORIENTED_EDGE('',*,*,#167477,.T.); +#167477 = EDGE_CURVE('',#167470,#167478,#167480,.T.); +#167478 = VERTEX_POINT('',#167479); +#167479 = CARTESIAN_POINT('',(125.061622,-102.290634,1.585)); +#167480 = LINE('',#167481,#167482); +#167481 = CARTESIAN_POINT('',(125.023128,-102.213647,1.585)); +#167482 = VECTOR('',#167483,1.); +#167483 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#167484 = ORIENTED_EDGE('',*,*,#167485,.T.); +#167485 = EDGE_CURVE('',#167478,#167486,#167488,.T.); +#167486 = VERTEX_POINT('',#167487); +#167487 = CARTESIAN_POINT('',(125.135735,-102.364748,1.585)); +#167488 = LINE('',#167489,#167490); +#167489 = CARTESIAN_POINT('',(125.061622,-102.290634,1.585)); +#167490 = VECTOR('',#167491,1.); +#167491 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#167492 = ORIENTED_EDGE('',*,*,#167493,.T.); +#167493 = EDGE_CURVE('',#167486,#167494,#167496,.T.); +#167494 = VERTEX_POINT('',#167495); +#167495 = CARTESIAN_POINT('',(125.435659,-102.364747,1.585)); +#167496 = CIRCLE('',#167497,0.299305962385); +#167497 = AXIS2_PLACEMENT_3D('',#167498,#167499,#167500); +#167498 = CARTESIAN_POINT('',(125.28569613635,-102.1057195909,1.585)); +#167499 = DIRECTION('',(0.,0.,1.)); +#167500 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#167501 = ORIENTED_EDGE('',*,*,#167502,.T.); +#167502 = EDGE_CURVE('',#167494,#167503,#167505,.T.); +#167503 = VERTEX_POINT('',#167504); +#167504 = CARTESIAN_POINT('',(125.482124,-102.32032,1.585)); +#167505 = LINE('',#167506,#167507); +#167506 = CARTESIAN_POINT('',(125.435659,-102.364747,1.585)); +#167507 = VECTOR('',#167508,1.); +#167508 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#167509 = ORIENTED_EDGE('',*,*,#167510,.T.); +#167510 = EDGE_CURVE('',#167503,#167511,#167513,.T.); +#167511 = VERTEX_POINT('',#167512); +#167512 = CARTESIAN_POINT('',(125.576825,-102.435713,1.585)); +#167513 = CIRCLE('',#167514,7.499993690112E-02); +#167514 = AXIS2_PLACEMENT_3D('',#167515,#167516,#167517); +#167515 = CARTESIAN_POINT('',(125.5237922483,-102.3826798237,1.585)); +#167516 = DIRECTION('',(0.,0.,-1.)); +#167517 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#167518 = ORIENTED_EDGE('',*,*,#167519,.T.); +#167519 = EDGE_CURVE('',#167511,#167520,#167522,.T.); +#167520 = VERTEX_POINT('',#167521); +#167521 = CARTESIAN_POINT('',(125.513315,-102.495457,1.585)); +#167522 = LINE('',#167523,#167524); +#167523 = CARTESIAN_POINT('',(125.576825,-102.435713,1.585)); +#167524 = VECTOR('',#167525,1.); +#167525 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#167526 = ORIENTED_EDGE('',*,*,#167527,.T.); +#167527 = EDGE_CURVE('',#167520,#167528,#167530,.T.); +#167528 = VERTEX_POINT('',#167529); +#167529 = CARTESIAN_POINT('',(125.053553,-102.492661,1.585)); +#167530 = CIRCLE('',#167531,0.461067828848); +#167531 = AXIS2_PLACEMENT_3D('',#167532,#167533,#167534); +#167532 = CARTESIAN_POINT('',(125.28586451268,-102.0943961335,1.585)); +#167533 = DIRECTION('',(-0.,0.,-1.)); +#167534 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#167535 = ORIENTED_EDGE('',*,*,#167536,.T.); +#167536 = EDGE_CURVE('',#167528,#167537,#167539,.T.); +#167537 = VERTEX_POINT('',#167538); +#167538 = CARTESIAN_POINT('',(124.936864,-102.374898,1.585)); +#167539 = LINE('',#167540,#167541); +#167540 = CARTESIAN_POINT('',(125.053553,-102.492661,1.585)); +#167541 = VECTOR('',#167542,1.); +#167542 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#167543 = ORIENTED_EDGE('',*,*,#167544,.T.); +#167544 = EDGE_CURVE('',#167537,#167545,#167547,.T.); +#167545 = VERTEX_POINT('',#167546); +#167546 = CARTESIAN_POINT('',(124.879603,-102.258013,1.585)); +#167547 = LINE('',#167548,#167549); +#167548 = CARTESIAN_POINT('',(124.936864,-102.374898,1.585)); +#167549 = VECTOR('',#167550,1.); +#167550 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#167551 = ORIENTED_EDGE('',*,*,#167552,.T.); +#167552 = EDGE_CURVE('',#167545,#167553,#167555,.T.); +#167553 = VERTEX_POINT('',#167554); +#167554 = CARTESIAN_POINT('',(124.829745,-102.049347,1.585)); +#167555 = LINE('',#167556,#167557); +#167556 = CARTESIAN_POINT('',(124.879603,-102.258013,1.585)); +#167557 = VECTOR('',#167558,1.); +#167558 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#167559 = ORIENTED_EDGE('',*,*,#167560,.T.); +#167560 = EDGE_CURVE('',#167553,#167561,#167563,.T.); +#167561 = VERTEX_POINT('',#167562); +#167562 = CARTESIAN_POINT('',(124.831984,-101.8883,1.585)); +#167563 = LINE('',#167564,#167565); +#167564 = CARTESIAN_POINT('',(124.829745,-102.049347,1.585)); +#167565 = VECTOR('',#167566,1.); +#167566 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#167567 = ORIENTED_EDGE('',*,*,#167568,.T.); +#167568 = EDGE_CURVE('',#167561,#167569,#167571,.T.); +#167569 = VERTEX_POINT('',#167570); +#167570 = CARTESIAN_POINT('',(124.885282,-101.682473,1.585)); +#167571 = LINE('',#167572,#167573); +#167572 = CARTESIAN_POINT('',(124.831984,-101.8883,1.585)); +#167573 = VECTOR('',#167574,1.); +#167574 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#167575 = ORIENTED_EDGE('',*,*,#167576,.T.); +#167576 = EDGE_CURVE('',#167569,#167577,#167579,.T.); +#167577 = VERTEX_POINT('',#167578); +#167578 = CARTESIAN_POINT('',(124.942231,-101.573492,1.585)); +#167579 = LINE('',#167580,#167581); +#167580 = CARTESIAN_POINT('',(124.885282,-101.682473,1.585)); +#167581 = VECTOR('',#167582,1.); +#167582 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#167583 = ORIENTED_EDGE('',*,*,#167584,.T.); +#167584 = EDGE_CURVE('',#167577,#167408,#167585,.T.); +#167585 = LINE('',#167586,#167587); +#167586 = CARTESIAN_POINT('',(124.942231,-101.573492,1.585)); +#167587 = VECTOR('',#167588,1.); +#167588 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#167589 = PLANE('',#167590); +#167590 = AXIS2_PLACEMENT_3D('',#167591,#167592,#167593); +#167591 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167592 = DIRECTION('',(0.,0.,1.)); +#167593 = DIRECTION('',(1.,0.,-0.)); +#167594 = SHELL_BASED_SURFACE_MODEL('',(#167595)); +#167595 = OPEN_SHELL('',(#167596)); +#167596 = ADVANCED_FACE('',(#167597),#167783,.T.); +#167597 = FACE_BOUND('',#167598,.F.); +#167598 = EDGE_LOOP('',(#167599,#167610,#167618,#167627,#167635,#167643, + #167652,#167660,#167669,#167677,#167685,#167693,#167702,#167710, + #167719,#167727,#167736,#167744,#167752,#167760,#167769,#167777)); +#167599 = ORIENTED_EDGE('',*,*,#167600,.T.); +#167600 = EDGE_CURVE('',#167601,#167603,#167605,.T.); +#167601 = VERTEX_POINT('',#167602); +#167602 = CARTESIAN_POINT('',(120.342494,-101.551478,1.585)); +#167603 = VERTEX_POINT('',#167604); +#167604 = CARTESIAN_POINT('',(120.357126,-101.402919,1.585)); +#167605 = CIRCLE('',#167606,7.500006711465E-02); +#167606 = AXIS2_PLACEMENT_3D('',#167607,#167608,#167609); +#167607 = CARTESIAN_POINT('',(120.35712593288,-101.4779190671,1.585)); +#167608 = DIRECTION('',(0.,0.,-1.)); +#167609 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#167610 = ORIENTED_EDGE('',*,*,#167611,.T.); +#167611 = EDGE_CURVE('',#167603,#167612,#167614,.T.); +#167612 = VERTEX_POINT('',#167613); +#167613 = CARTESIAN_POINT('',(120.983911,-101.403681,1.585)); +#167614 = LINE('',#167615,#167616); +#167615 = CARTESIAN_POINT('',(120.357126,-101.402919,1.585)); +#167616 = VECTOR('',#167617,1.); +#167617 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#167618 = ORIENTED_EDGE('',*,*,#167619,.T.); +#167619 = EDGE_CURVE('',#167612,#167620,#167622,.T.); +#167620 = VERTEX_POINT('',#167621); +#167621 = CARTESIAN_POINT('',(121.049732,-101.492551,1.585)); +#167622 = CIRCLE('',#167623,7.447391611625E-02); +#167623 = AXIS2_PLACEMENT_3D('',#167624,#167625,#167626); +#167624 = CARTESIAN_POINT('',(120.97673192664,-101.4778080874,1.585)); +#167625 = DIRECTION('',(0.,0.,-1.)); +#167626 = DIRECTION('',(9.639715124795E-02,0.995342950561,0.)); +#167627 = ORIENTED_EDGE('',*,*,#167628,.T.); +#167628 = EDGE_CURVE('',#167620,#167629,#167631,.T.); +#167629 = VERTEX_POINT('',#167630); +#167630 = CARTESIAN_POINT('',(121.032616,-101.527307,1.585)); +#167631 = LINE('',#167632,#167633); +#167632 = CARTESIAN_POINT('',(121.049732,-101.492551,1.585)); +#167633 = VECTOR('',#167634,1.); +#167634 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#167635 = ORIENTED_EDGE('',*,*,#167636,.T.); +#167636 = EDGE_CURVE('',#167629,#167637,#167639,.T.); +#167637 = VERTEX_POINT('',#167638); +#167638 = CARTESIAN_POINT('',(120.80572,-101.786616,1.585)); +#167639 = LINE('',#167640,#167641); +#167640 = CARTESIAN_POINT('',(121.032616,-101.527307,1.585)); +#167641 = VECTOR('',#167642,1.); +#167642 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#167643 = ORIENTED_EDGE('',*,*,#167644,.T.); +#167644 = EDGE_CURVE('',#167637,#167645,#167647,.T.); +#167645 = VERTEX_POINT('',#167646); +#167646 = CARTESIAN_POINT('',(121.049732,-102.034715,1.585)); +#167647 = CIRCLE('',#167648,0.348520834816); +#167648 = AXIS2_PLACEMENT_3D('',#167649,#167650,#167651); +#167649 = CARTESIAN_POINT('',(120.7124266174,-102.1224181993,1.585)); +#167650 = DIRECTION('',(0.,0.,-1.)); +#167651 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#167652 = ORIENTED_EDGE('',*,*,#167653,.T.); +#167653 = EDGE_CURVE('',#167645,#167654,#167656,.T.); +#167654 = VERTEX_POINT('',#167655); +#167655 = CARTESIAN_POINT('',(121.04851,-102.307252,1.585)); +#167656 = LINE('',#167657,#167658); +#167657 = CARTESIAN_POINT('',(121.049732,-102.034715,1.585)); +#167658 = VECTOR('',#167659,1.); +#167659 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#167660 = ORIENTED_EDGE('',*,*,#167661,.T.); +#167661 = EDGE_CURVE('',#167654,#167662,#167664,.T.); +#167662 = VERTEX_POINT('',#167663); +#167663 = CARTESIAN_POINT('',(120.800329,-102.551478,1.585)); +#167664 = CIRCLE('',#167665,0.348635327447); +#167665 = AXIS2_PLACEMENT_3D('',#167666,#167667,#167668); +#167666 = CARTESIAN_POINT('',(120.71255748129,-102.2140720841,1.585)); +#167667 = DIRECTION('',(0.,0.,-1.)); +#167668 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#167669 = ORIENTED_EDGE('',*,*,#167670,.T.); +#167670 = EDGE_CURVE('',#167662,#167671,#167673,.T.); +#167671 = VERTEX_POINT('',#167672); +#167672 = CARTESIAN_POINT('',(120.480173,-102.550256,1.585)); +#167673 = LINE('',#167674,#167675); +#167674 = CARTESIAN_POINT('',(120.800329,-102.551478,1.585)); +#167675 = VECTOR('',#167676,1.); +#167676 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#167677 = ORIENTED_EDGE('',*,*,#167678,.T.); +#167678 = EDGE_CURVE('',#167671,#167679,#167681,.T.); +#167679 = VERTEX_POINT('',#167680); +#167680 = CARTESIAN_POINT('',(120.35746,-102.48805,1.585)); +#167681 = LINE('',#167682,#167683); +#167682 = CARTESIAN_POINT('',(120.480173,-102.550256,1.585)); +#167683 = VECTOR('',#167684,1.); +#167684 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#167685 = ORIENTED_EDGE('',*,*,#167686,.T.); +#167686 = EDGE_CURVE('',#167679,#167687,#167689,.T.); +#167687 = VERTEX_POINT('',#167688); +#167688 = CARTESIAN_POINT('',(120.294765,-102.424347,1.585)); +#167689 = LINE('',#167690,#167691); +#167690 = CARTESIAN_POINT('',(120.35746,-102.48805,1.585)); +#167691 = VECTOR('',#167692,1.); +#167692 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#167693 = ORIENTED_EDGE('',*,*,#167694,.T.); +#167694 = EDGE_CURVE('',#167687,#167695,#167697,.T.); +#167695 = VERTEX_POINT('',#167696); +#167696 = CARTESIAN_POINT('',(120.41016,-102.329648,1.585)); +#167697 = CIRCLE('',#167698,7.50001266804E-02); +#167698 = AXIS2_PLACEMENT_3D('',#167699,#167700,#167701); +#167699 = CARTESIAN_POINT('',(120.35712605199,-102.3826802483,1.585)); +#167700 = DIRECTION('',(0.,0.,-1.)); +#167701 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#167702 = ORIENTED_EDGE('',*,*,#167703,.T.); +#167703 = EDGE_CURVE('',#167695,#167704,#167706,.T.); +#167704 = VERTEX_POINT('',#167705); +#167705 = CARTESIAN_POINT('',(120.449172,-102.368661,1.585)); +#167706 = LINE('',#167707,#167708); +#167707 = CARTESIAN_POINT('',(120.41016,-102.329648,1.585)); +#167708 = VECTOR('',#167709,1.); +#167709 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#167710 = ORIENTED_EDGE('',*,*,#167711,.T.); +#167711 = EDGE_CURVE('',#167704,#167712,#167714,.T.); +#167712 = VERTEX_POINT('',#167713); +#167713 = CARTESIAN_POINT('',(120.836507,-102.368661,1.585)); +#167714 = CIRCLE('',#167715,0.358502380266); +#167715 = AXIS2_PLACEMENT_3D('',#167716,#167717,#167718); +#167716 = CARTESIAN_POINT('',(120.6428395,-102.066971,1.585)); +#167717 = DIRECTION('',(0.,0.,1.)); +#167718 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#167719 = ORIENTED_EDGE('',*,*,#167720,.T.); +#167720 = EDGE_CURVE('',#167712,#167721,#167723,.T.); +#167721 = VERTEX_POINT('',#167722); +#167722 = CARTESIAN_POINT('',(120.866914,-102.338253,1.585)); +#167723 = LINE('',#167724,#167725); +#167724 = CARTESIAN_POINT('',(120.836507,-102.368661,1.585)); +#167725 = VECTOR('',#167726,1.); +#167726 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#167727 = ORIENTED_EDGE('',*,*,#167728,.T.); +#167728 = EDGE_CURVE('',#167721,#167729,#167731,.T.); +#167729 = VERTEX_POINT('',#167730); +#167730 = CARTESIAN_POINT('',(120.866915,-101.998536,1.585)); +#167731 = CIRCLE('',#167732,0.305616146029); +#167732 = AXIS2_PLACEMENT_3D('',#167733,#167734,#167735); +#167733 = CARTESIAN_POINT('',(120.61284892049,-102.1683937521,1.585)); +#167734 = DIRECTION('',(0.,-0.,1.)); +#167735 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#167736 = ORIENTED_EDGE('',*,*,#167737,.T.); +#167737 = EDGE_CURVE('',#167729,#167738,#167740,.T.); +#167738 = VERTEX_POINT('',#167739); +#167739 = CARTESIAN_POINT('',(120.836508,-101.968129,1.585)); +#167740 = LINE('',#167741,#167742); +#167741 = CARTESIAN_POINT('',(120.866915,-101.998536,1.585)); +#167742 = VECTOR('',#167743,1.); +#167743 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#167744 = ORIENTED_EDGE('',*,*,#167745,.T.); +#167745 = EDGE_CURVE('',#167738,#167746,#167748,.T.); +#167746 = VERTEX_POINT('',#167747); +#167747 = CARTESIAN_POINT('',(120.767992,-101.933871,1.585)); +#167748 = LINE('',#167749,#167750); +#167749 = CARTESIAN_POINT('',(120.836508,-101.968129,1.585)); +#167750 = VECTOR('',#167751,1.); +#167751 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#167752 = ORIENTED_EDGE('',*,*,#167753,.T.); +#167753 = EDGE_CURVE('',#167746,#167754,#167756,.T.); +#167754 = VERTEX_POINT('',#167755); +#167755 = CARTESIAN_POINT('',(120.628208,-101.93243,1.585)); +#167756 = LINE('',#167757,#167758); +#167757 = CARTESIAN_POINT('',(120.767992,-101.933871,1.585)); +#167758 = VECTOR('',#167759,1.); +#167759 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#167760 = ORIENTED_EDGE('',*,*,#167761,.T.); +#167761 = EDGE_CURVE('',#167754,#167762,#167764,.T.); +#167762 = VERTEX_POINT('',#167763); +#167763 = CARTESIAN_POINT('',(120.586397,-101.809483,1.585)); +#167764 = CIRCLE('',#167765,7.500015628755E-02); +#167765 = AXIS2_PLACEMENT_3D('',#167766,#167767,#167768); +#167766 = CARTESIAN_POINT('',(120.64284028432,-101.8588710461,1.585)); +#167767 = DIRECTION('',(0.,0.,-1.)); +#167768 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#167769 = ORIENTED_EDGE('',*,*,#167770,.T.); +#167770 = EDGE_CURVE('',#167762,#167771,#167773,.T.); +#167771 = VERTEX_POINT('',#167772); +#167772 = CARTESIAN_POINT('',(120.810891,-101.552919,1.585)); +#167773 = LINE('',#167774,#167775); +#167774 = CARTESIAN_POINT('',(120.586397,-101.809483,1.585)); +#167775 = VECTOR('',#167776,1.); +#167776 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#167777 = ORIENTED_EDGE('',*,*,#167778,.T.); +#167778 = EDGE_CURVE('',#167771,#167601,#167779,.T.); +#167779 = LINE('',#167780,#167781); +#167780 = CARTESIAN_POINT('',(120.810891,-101.552919,1.585)); +#167781 = VECTOR('',#167782,1.); +#167782 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#167783 = PLANE('',#167784); +#167784 = AXIS2_PLACEMENT_3D('',#167785,#167786,#167787); +#167785 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167786 = DIRECTION('',(0.,0.,1.)); +#167787 = DIRECTION('',(1.,0.,-0.)); +#167788 = SHELL_BASED_SURFACE_MODEL('',(#167789)); +#167789 = OPEN_SHELL('',(#167790)); +#167790 = ADVANCED_FACE('',(#167791),#167977,.T.); +#167791 = FACE_BOUND('',#167792,.F.); +#167792 = EDGE_LOOP('',(#167793,#167804,#167812,#167821,#167829,#167837, + #167846,#167854,#167863,#167871,#167879,#167887,#167896,#167904, + #167913,#167921,#167930,#167938,#167946,#167954,#167963,#167971)); +#167793 = ORIENTED_EDGE('',*,*,#167794,.T.); +#167794 = EDGE_CURVE('',#167795,#167797,#167799,.T.); +#167795 = VERTEX_POINT('',#167796); +#167796 = CARTESIAN_POINT('',(125.842494,-101.551478,1.585)); +#167797 = VERTEX_POINT('',#167798); +#167798 = CARTESIAN_POINT('',(125.857126,-101.402919,1.585)); +#167799 = CIRCLE('',#167800,7.500006711465E-02); +#167800 = AXIS2_PLACEMENT_3D('',#167801,#167802,#167803); +#167801 = CARTESIAN_POINT('',(125.85712593288,-101.4779190671,1.585)); +#167802 = DIRECTION('',(0.,0.,-1.)); +#167803 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#167804 = ORIENTED_EDGE('',*,*,#167805,.T.); +#167805 = EDGE_CURVE('',#167797,#167806,#167808,.T.); +#167806 = VERTEX_POINT('',#167807); +#167807 = CARTESIAN_POINT('',(126.483911,-101.403681,1.585)); +#167808 = LINE('',#167809,#167810); +#167809 = CARTESIAN_POINT('',(125.857126,-101.402919,1.585)); +#167810 = VECTOR('',#167811,1.); +#167811 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#167812 = ORIENTED_EDGE('',*,*,#167813,.T.); +#167813 = EDGE_CURVE('',#167806,#167814,#167816,.T.); +#167814 = VERTEX_POINT('',#167815); +#167815 = CARTESIAN_POINT('',(126.549732,-101.492551,1.585)); +#167816 = CIRCLE('',#167817,7.447391611625E-02); +#167817 = AXIS2_PLACEMENT_3D('',#167818,#167819,#167820); +#167818 = CARTESIAN_POINT('',(126.47673192664,-101.4778080874,1.585)); +#167819 = DIRECTION('',(0.,0.,-1.)); +#167820 = DIRECTION('',(9.639715124795E-02,0.995342950561,0.)); +#167821 = ORIENTED_EDGE('',*,*,#167822,.T.); +#167822 = EDGE_CURVE('',#167814,#167823,#167825,.T.); +#167823 = VERTEX_POINT('',#167824); +#167824 = CARTESIAN_POINT('',(126.532616,-101.527307,1.585)); +#167825 = LINE('',#167826,#167827); +#167826 = CARTESIAN_POINT('',(126.549732,-101.492551,1.585)); +#167827 = VECTOR('',#167828,1.); +#167828 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#167829 = ORIENTED_EDGE('',*,*,#167830,.T.); +#167830 = EDGE_CURVE('',#167823,#167831,#167833,.T.); +#167831 = VERTEX_POINT('',#167832); +#167832 = CARTESIAN_POINT('',(126.30572,-101.786616,1.585)); +#167833 = LINE('',#167834,#167835); +#167834 = CARTESIAN_POINT('',(126.532616,-101.527307,1.585)); +#167835 = VECTOR('',#167836,1.); +#167836 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#167837 = ORIENTED_EDGE('',*,*,#167838,.T.); +#167838 = EDGE_CURVE('',#167831,#167839,#167841,.T.); +#167839 = VERTEX_POINT('',#167840); +#167840 = CARTESIAN_POINT('',(126.549732,-102.034715,1.585)); +#167841 = CIRCLE('',#167842,0.348520834816); +#167842 = AXIS2_PLACEMENT_3D('',#167843,#167844,#167845); +#167843 = CARTESIAN_POINT('',(126.2124266174,-102.1224181993,1.585)); +#167844 = DIRECTION('',(0.,0.,-1.)); +#167845 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#167846 = ORIENTED_EDGE('',*,*,#167847,.T.); +#167847 = EDGE_CURVE('',#167839,#167848,#167850,.T.); +#167848 = VERTEX_POINT('',#167849); +#167849 = CARTESIAN_POINT('',(126.54851,-102.307252,1.585)); +#167850 = LINE('',#167851,#167852); +#167851 = CARTESIAN_POINT('',(126.549732,-102.034715,1.585)); +#167852 = VECTOR('',#167853,1.); +#167853 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#167854 = ORIENTED_EDGE('',*,*,#167855,.T.); +#167855 = EDGE_CURVE('',#167848,#167856,#167858,.T.); +#167856 = VERTEX_POINT('',#167857); +#167857 = CARTESIAN_POINT('',(126.300329,-102.551478,1.585)); +#167858 = CIRCLE('',#167859,0.348635327447); +#167859 = AXIS2_PLACEMENT_3D('',#167860,#167861,#167862); +#167860 = CARTESIAN_POINT('',(126.21255748129,-102.2140720841,1.585)); +#167861 = DIRECTION('',(0.,0.,-1.)); +#167862 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#167863 = ORIENTED_EDGE('',*,*,#167864,.T.); +#167864 = EDGE_CURVE('',#167856,#167865,#167867,.T.); +#167865 = VERTEX_POINT('',#167866); +#167866 = CARTESIAN_POINT('',(125.980173,-102.550256,1.585)); +#167867 = LINE('',#167868,#167869); +#167868 = CARTESIAN_POINT('',(126.300329,-102.551478,1.585)); +#167869 = VECTOR('',#167870,1.); +#167870 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#167871 = ORIENTED_EDGE('',*,*,#167872,.T.); +#167872 = EDGE_CURVE('',#167865,#167873,#167875,.T.); +#167873 = VERTEX_POINT('',#167874); +#167874 = CARTESIAN_POINT('',(125.85746,-102.48805,1.585)); +#167875 = LINE('',#167876,#167877); +#167876 = CARTESIAN_POINT('',(125.980173,-102.550256,1.585)); +#167877 = VECTOR('',#167878,1.); +#167878 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#167879 = ORIENTED_EDGE('',*,*,#167880,.T.); +#167880 = EDGE_CURVE('',#167873,#167881,#167883,.T.); +#167881 = VERTEX_POINT('',#167882); +#167882 = CARTESIAN_POINT('',(125.794765,-102.424347,1.585)); +#167883 = LINE('',#167884,#167885); +#167884 = CARTESIAN_POINT('',(125.85746,-102.48805,1.585)); +#167885 = VECTOR('',#167886,1.); +#167886 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#167887 = ORIENTED_EDGE('',*,*,#167888,.T.); +#167888 = EDGE_CURVE('',#167881,#167889,#167891,.T.); +#167889 = VERTEX_POINT('',#167890); +#167890 = CARTESIAN_POINT('',(125.91016,-102.329648,1.585)); +#167891 = CIRCLE('',#167892,7.50001266804E-02); +#167892 = AXIS2_PLACEMENT_3D('',#167893,#167894,#167895); +#167893 = CARTESIAN_POINT('',(125.85712605199,-102.3826802483,1.585)); +#167894 = DIRECTION('',(0.,0.,-1.)); +#167895 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#167896 = ORIENTED_EDGE('',*,*,#167897,.T.); +#167897 = EDGE_CURVE('',#167889,#167898,#167900,.T.); +#167898 = VERTEX_POINT('',#167899); +#167899 = CARTESIAN_POINT('',(125.949172,-102.368661,1.585)); +#167900 = LINE('',#167901,#167902); +#167901 = CARTESIAN_POINT('',(125.91016,-102.329648,1.585)); +#167902 = VECTOR('',#167903,1.); +#167903 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#167904 = ORIENTED_EDGE('',*,*,#167905,.T.); +#167905 = EDGE_CURVE('',#167898,#167906,#167908,.T.); +#167906 = VERTEX_POINT('',#167907); +#167907 = CARTESIAN_POINT('',(126.336507,-102.368661,1.585)); +#167908 = CIRCLE('',#167909,0.358502380266); +#167909 = AXIS2_PLACEMENT_3D('',#167910,#167911,#167912); +#167910 = CARTESIAN_POINT('',(126.1428395,-102.066971,1.585)); +#167911 = DIRECTION('',(0.,0.,1.)); +#167912 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#167913 = ORIENTED_EDGE('',*,*,#167914,.T.); +#167914 = EDGE_CURVE('',#167906,#167915,#167917,.T.); +#167915 = VERTEX_POINT('',#167916); +#167916 = CARTESIAN_POINT('',(126.366914,-102.338253,1.585)); +#167917 = LINE('',#167918,#167919); +#167918 = CARTESIAN_POINT('',(126.336507,-102.368661,1.585)); +#167919 = VECTOR('',#167920,1.); +#167920 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#167921 = ORIENTED_EDGE('',*,*,#167922,.T.); +#167922 = EDGE_CURVE('',#167915,#167923,#167925,.T.); +#167923 = VERTEX_POINT('',#167924); +#167924 = CARTESIAN_POINT('',(126.366915,-101.998536,1.585)); +#167925 = CIRCLE('',#167926,0.305616146029); +#167926 = AXIS2_PLACEMENT_3D('',#167927,#167928,#167929); +#167927 = CARTESIAN_POINT('',(126.11284892049,-102.1683937521,1.585)); +#167928 = DIRECTION('',(0.,-0.,1.)); +#167929 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#167930 = ORIENTED_EDGE('',*,*,#167931,.T.); +#167931 = EDGE_CURVE('',#167923,#167932,#167934,.T.); +#167932 = VERTEX_POINT('',#167933); +#167933 = CARTESIAN_POINT('',(126.336508,-101.968129,1.585)); +#167934 = LINE('',#167935,#167936); +#167935 = CARTESIAN_POINT('',(126.366915,-101.998536,1.585)); +#167936 = VECTOR('',#167937,1.); +#167937 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#167938 = ORIENTED_EDGE('',*,*,#167939,.T.); +#167939 = EDGE_CURVE('',#167932,#167940,#167942,.T.); +#167940 = VERTEX_POINT('',#167941); +#167941 = CARTESIAN_POINT('',(126.267992,-101.933871,1.585)); +#167942 = LINE('',#167943,#167944); +#167943 = CARTESIAN_POINT('',(126.336508,-101.968129,1.585)); +#167944 = VECTOR('',#167945,1.); +#167945 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#167946 = ORIENTED_EDGE('',*,*,#167947,.T.); +#167947 = EDGE_CURVE('',#167940,#167948,#167950,.T.); +#167948 = VERTEX_POINT('',#167949); +#167949 = CARTESIAN_POINT('',(126.128208,-101.93243,1.585)); +#167950 = LINE('',#167951,#167952); +#167951 = CARTESIAN_POINT('',(126.267992,-101.933871,1.585)); +#167952 = VECTOR('',#167953,1.); +#167953 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#167954 = ORIENTED_EDGE('',*,*,#167955,.T.); +#167955 = EDGE_CURVE('',#167948,#167956,#167958,.T.); +#167956 = VERTEX_POINT('',#167957); +#167957 = CARTESIAN_POINT('',(126.086397,-101.809483,1.585)); +#167958 = CIRCLE('',#167959,7.500015628755E-02); +#167959 = AXIS2_PLACEMENT_3D('',#167960,#167961,#167962); +#167960 = CARTESIAN_POINT('',(126.14284028432,-101.8588710461,1.585)); +#167961 = DIRECTION('',(0.,0.,-1.)); +#167962 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#167963 = ORIENTED_EDGE('',*,*,#167964,.T.); +#167964 = EDGE_CURVE('',#167956,#167965,#167967,.T.); +#167965 = VERTEX_POINT('',#167966); +#167966 = CARTESIAN_POINT('',(126.310891,-101.552919,1.585)); +#167967 = LINE('',#167968,#167969); +#167968 = CARTESIAN_POINT('',(126.086397,-101.809483,1.585)); +#167969 = VECTOR('',#167970,1.); +#167970 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#167971 = ORIENTED_EDGE('',*,*,#167972,.T.); +#167972 = EDGE_CURVE('',#167965,#167795,#167973,.T.); +#167973 = LINE('',#167974,#167975); +#167974 = CARTESIAN_POINT('',(126.310891,-101.552919,1.585)); +#167975 = VECTOR('',#167976,1.); +#167976 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#167977 = PLANE('',#167978); +#167978 = AXIS2_PLACEMENT_3D('',#167979,#167980,#167981); +#167979 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167980 = DIRECTION('',(0.,0.,1.)); +#167981 = DIRECTION('',(1.,0.,-0.)); +#167982 = SHELL_BASED_SURFACE_MODEL('',(#167983)); +#167983 = OPEN_SHELL('',(#167984)); +#167984 = ADVANCED_FACE('',(#167985),#168171,.T.); +#167985 = FACE_BOUND('',#167986,.F.); +#167986 = EDGE_LOOP('',(#167987,#167998,#168006,#168015,#168023,#168031, + #168040,#168048,#168057,#168065,#168073,#168081,#168090,#168098, + #168107,#168115,#168124,#168132,#168140,#168148,#168157,#168165)); +#167987 = ORIENTED_EDGE('',*,*,#167988,.T.); +#167988 = EDGE_CURVE('',#167989,#167991,#167993,.T.); +#167989 = VERTEX_POINT('',#167990); +#167990 = CARTESIAN_POINT('',(126.794875,-101.551478,1.585)); +#167991 = VERTEX_POINT('',#167992); +#167992 = CARTESIAN_POINT('',(126.809507,-101.402919,1.585)); +#167993 = CIRCLE('',#167994,7.500006711465E-02); +#167994 = AXIS2_PLACEMENT_3D('',#167995,#167996,#167997); +#167995 = CARTESIAN_POINT('',(126.80950693288,-101.4779190671,1.585)); +#167996 = DIRECTION('',(0.,0.,-1.)); +#167997 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#167998 = ORIENTED_EDGE('',*,*,#167999,.T.); +#167999 = EDGE_CURVE('',#167991,#168000,#168002,.T.); +#168000 = VERTEX_POINT('',#168001); +#168001 = CARTESIAN_POINT('',(127.436292,-101.403681,1.585)); +#168002 = LINE('',#168003,#168004); +#168003 = CARTESIAN_POINT('',(126.809507,-101.402919,1.585)); +#168004 = VECTOR('',#168005,1.); +#168005 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#168006 = ORIENTED_EDGE('',*,*,#168007,.T.); +#168007 = EDGE_CURVE('',#168000,#168008,#168010,.T.); +#168008 = VERTEX_POINT('',#168009); +#168009 = CARTESIAN_POINT('',(127.502113,-101.492551,1.585)); +#168010 = CIRCLE('',#168011,7.447391611623E-02); +#168011 = AXIS2_PLACEMENT_3D('',#168012,#168013,#168014); +#168012 = CARTESIAN_POINT('',(127.42911292664,-101.4778080874,1.585)); +#168013 = DIRECTION('',(0.,0.,-1.)); +#168014 = DIRECTION('',(9.639715124761E-02,0.995342950561,0.)); +#168015 = ORIENTED_EDGE('',*,*,#168016,.T.); +#168016 = EDGE_CURVE('',#168008,#168017,#168019,.T.); +#168017 = VERTEX_POINT('',#168018); +#168018 = CARTESIAN_POINT('',(127.484997,-101.527307,1.585)); +#168019 = LINE('',#168020,#168021); +#168020 = CARTESIAN_POINT('',(127.502113,-101.492551,1.585)); +#168021 = VECTOR('',#168022,1.); +#168022 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#168023 = ORIENTED_EDGE('',*,*,#168024,.T.); +#168024 = EDGE_CURVE('',#168017,#168025,#168027,.T.); +#168025 = VERTEX_POINT('',#168026); +#168026 = CARTESIAN_POINT('',(127.258101,-101.786616,1.585)); +#168027 = LINE('',#168028,#168029); +#168028 = CARTESIAN_POINT('',(127.484997,-101.527307,1.585)); +#168029 = VECTOR('',#168030,1.); +#168030 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#168031 = ORIENTED_EDGE('',*,*,#168032,.T.); +#168032 = EDGE_CURVE('',#168025,#168033,#168035,.T.); +#168033 = VERTEX_POINT('',#168034); +#168034 = CARTESIAN_POINT('',(127.502113,-102.034715,1.585)); +#168035 = CIRCLE('',#168036,0.348520834816); +#168036 = AXIS2_PLACEMENT_3D('',#168037,#168038,#168039); +#168037 = CARTESIAN_POINT('',(127.1648076174,-102.1224181993,1.585)); +#168038 = DIRECTION('',(0.,0.,-1.)); +#168039 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#168040 = ORIENTED_EDGE('',*,*,#168041,.T.); +#168041 = EDGE_CURVE('',#168033,#168042,#168044,.T.); +#168042 = VERTEX_POINT('',#168043); +#168043 = CARTESIAN_POINT('',(127.500891,-102.307252,1.585)); +#168044 = LINE('',#168045,#168046); +#168045 = CARTESIAN_POINT('',(127.502113,-102.034715,1.585)); +#168046 = VECTOR('',#168047,1.); +#168047 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#168048 = ORIENTED_EDGE('',*,*,#168049,.T.); +#168049 = EDGE_CURVE('',#168042,#168050,#168052,.T.); +#168050 = VERTEX_POINT('',#168051); +#168051 = CARTESIAN_POINT('',(127.25271,-102.551478,1.585)); +#168052 = CIRCLE('',#168053,0.348635327447); +#168053 = AXIS2_PLACEMENT_3D('',#168054,#168055,#168056); +#168054 = CARTESIAN_POINT('',(127.16493848129,-102.2140720841,1.585)); +#168055 = DIRECTION('',(0.,0.,-1.)); +#168056 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#168057 = ORIENTED_EDGE('',*,*,#168058,.T.); +#168058 = EDGE_CURVE('',#168050,#168059,#168061,.T.); +#168059 = VERTEX_POINT('',#168060); +#168060 = CARTESIAN_POINT('',(126.932554,-102.550256,1.585)); +#168061 = LINE('',#168062,#168063); +#168062 = CARTESIAN_POINT('',(127.25271,-102.551478,1.585)); +#168063 = VECTOR('',#168064,1.); +#168064 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#168065 = ORIENTED_EDGE('',*,*,#168066,.T.); +#168066 = EDGE_CURVE('',#168059,#168067,#168069,.T.); +#168067 = VERTEX_POINT('',#168068); +#168068 = CARTESIAN_POINT('',(126.809841,-102.48805,1.585)); +#168069 = LINE('',#168070,#168071); +#168070 = CARTESIAN_POINT('',(126.932554,-102.550256,1.585)); +#168071 = VECTOR('',#168072,1.); +#168072 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#168073 = ORIENTED_EDGE('',*,*,#168074,.T.); +#168074 = EDGE_CURVE('',#168067,#168075,#168077,.T.); +#168075 = VERTEX_POINT('',#168076); +#168076 = CARTESIAN_POINT('',(126.747146,-102.424347,1.585)); +#168077 = LINE('',#168078,#168079); +#168078 = CARTESIAN_POINT('',(126.809841,-102.48805,1.585)); +#168079 = VECTOR('',#168080,1.); +#168080 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#168081 = ORIENTED_EDGE('',*,*,#168082,.T.); +#168082 = EDGE_CURVE('',#168075,#168083,#168085,.T.); +#168083 = VERTEX_POINT('',#168084); +#168084 = CARTESIAN_POINT('',(126.862541,-102.329648,1.585)); +#168085 = CIRCLE('',#168086,7.500012668039E-02); +#168086 = AXIS2_PLACEMENT_3D('',#168087,#168088,#168089); +#168087 = CARTESIAN_POINT('',(126.80950705199,-102.3826802483,1.585)); +#168088 = DIRECTION('',(0.,0.,-1.)); +#168089 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#168090 = ORIENTED_EDGE('',*,*,#168091,.T.); +#168091 = EDGE_CURVE('',#168083,#168092,#168094,.T.); +#168092 = VERTEX_POINT('',#168093); +#168093 = CARTESIAN_POINT('',(126.901553,-102.368661,1.585)); +#168094 = LINE('',#168095,#168096); +#168095 = CARTESIAN_POINT('',(126.862541,-102.329648,1.585)); +#168096 = VECTOR('',#168097,1.); +#168097 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#168098 = ORIENTED_EDGE('',*,*,#168099,.T.); +#168099 = EDGE_CURVE('',#168092,#168100,#168102,.T.); +#168100 = VERTEX_POINT('',#168101); +#168101 = CARTESIAN_POINT('',(127.288888,-102.368661,1.585)); +#168102 = CIRCLE('',#168103,0.358502380266); +#168103 = AXIS2_PLACEMENT_3D('',#168104,#168105,#168106); +#168104 = CARTESIAN_POINT('',(127.0952205,-102.066971,1.585)); +#168105 = DIRECTION('',(0.,0.,1.)); +#168106 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#168107 = ORIENTED_EDGE('',*,*,#168108,.T.); +#168108 = EDGE_CURVE('',#168100,#168109,#168111,.T.); +#168109 = VERTEX_POINT('',#168110); +#168110 = CARTESIAN_POINT('',(127.319295,-102.338253,1.585)); +#168111 = LINE('',#168112,#168113); +#168112 = CARTESIAN_POINT('',(127.288888,-102.368661,1.585)); +#168113 = VECTOR('',#168114,1.); +#168114 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#168115 = ORIENTED_EDGE('',*,*,#168116,.T.); +#168116 = EDGE_CURVE('',#168109,#168117,#168119,.T.); +#168117 = VERTEX_POINT('',#168118); +#168118 = CARTESIAN_POINT('',(127.319296,-101.998536,1.585)); +#168119 = CIRCLE('',#168120,0.305616146029); +#168120 = AXIS2_PLACEMENT_3D('',#168121,#168122,#168123); +#168121 = CARTESIAN_POINT('',(127.06522992049,-102.1683937521,1.585)); +#168122 = DIRECTION('',(0.,-0.,1.)); +#168123 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#168124 = ORIENTED_EDGE('',*,*,#168125,.T.); +#168125 = EDGE_CURVE('',#168117,#168126,#168128,.T.); +#168126 = VERTEX_POINT('',#168127); +#168127 = CARTESIAN_POINT('',(127.288889,-101.968129,1.585)); +#168128 = LINE('',#168129,#168130); +#168129 = CARTESIAN_POINT('',(127.319296,-101.998536,1.585)); +#168130 = VECTOR('',#168131,1.); +#168131 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#168132 = ORIENTED_EDGE('',*,*,#168133,.T.); +#168133 = EDGE_CURVE('',#168126,#168134,#168136,.T.); +#168134 = VERTEX_POINT('',#168135); +#168135 = CARTESIAN_POINT('',(127.220373,-101.933871,1.585)); +#168136 = LINE('',#168137,#168138); +#168137 = CARTESIAN_POINT('',(127.288889,-101.968129,1.585)); +#168138 = VECTOR('',#168139,1.); +#168139 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#168140 = ORIENTED_EDGE('',*,*,#168141,.T.); +#168141 = EDGE_CURVE('',#168134,#168142,#168144,.T.); +#168142 = VERTEX_POINT('',#168143); +#168143 = CARTESIAN_POINT('',(127.080589,-101.93243,1.585)); +#168144 = LINE('',#168145,#168146); +#168145 = CARTESIAN_POINT('',(127.220373,-101.933871,1.585)); +#168146 = VECTOR('',#168147,1.); +#168147 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#168148 = ORIENTED_EDGE('',*,*,#168149,.T.); +#168149 = EDGE_CURVE('',#168142,#168150,#168152,.T.); +#168150 = VERTEX_POINT('',#168151); +#168151 = CARTESIAN_POINT('',(127.038778,-101.809483,1.585)); +#168152 = CIRCLE('',#168153,7.500015628755E-02); +#168153 = AXIS2_PLACEMENT_3D('',#168154,#168155,#168156); +#168154 = CARTESIAN_POINT('',(127.09522128432,-101.8588710461,1.585)); +#168155 = DIRECTION('',(0.,0.,-1.)); +#168156 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#168157 = ORIENTED_EDGE('',*,*,#168158,.T.); +#168158 = EDGE_CURVE('',#168150,#168159,#168161,.T.); +#168159 = VERTEX_POINT('',#168160); +#168160 = CARTESIAN_POINT('',(127.263272,-101.552919,1.585)); +#168161 = LINE('',#168162,#168163); +#168162 = CARTESIAN_POINT('',(127.038778,-101.809483,1.585)); +#168163 = VECTOR('',#168164,1.); +#168164 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#168165 = ORIENTED_EDGE('',*,*,#168166,.T.); +#168166 = EDGE_CURVE('',#168159,#167989,#168167,.T.); +#168167 = LINE('',#168168,#168169); +#168168 = CARTESIAN_POINT('',(127.263272,-101.552919,1.585)); +#168169 = VECTOR('',#168170,1.); +#168170 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#168171 = PLANE('',#168172); +#168172 = AXIS2_PLACEMENT_3D('',#168173,#168174,#168175); +#168173 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168174 = DIRECTION('',(0.,0.,1.)); +#168175 = DIRECTION('',(1.,0.,-0.)); +#168176 = SHELL_BASED_SURFACE_MODEL('',(#168177)); +#168177 = OPEN_SHELL('',(#168178)); +#168178 = ADVANCED_FACE('',(#168179),#168215,.T.); +#168179 = FACE_BOUND('',#168180,.F.); +#168180 = EDGE_LOOP('',(#168181,#168192,#168200,#168209)); +#168181 = ORIENTED_EDGE('',*,*,#168182,.T.); +#168182 = EDGE_CURVE('',#168183,#168185,#168187,.T.); +#168183 = VERTEX_POINT('',#168184); +#168184 = CARTESIAN_POINT('',(96.629392,-101.8606,1.585)); +#168185 = VERTEX_POINT('',#168186); +#168186 = CARTESIAN_POINT('',(96.629392,-101.7406,1.585)); +#168187 = CIRCLE('',#168188,6.000000000042E-02); +#168188 = AXIS2_PLACEMENT_3D('',#168189,#168190,#168191); +#168189 = CARTESIAN_POINT('',(96.629391774412,-101.8006,1.585)); +#168190 = DIRECTION('',(0.,0.,-1.)); +#168191 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168192 = ORIENTED_EDGE('',*,*,#168193,.T.); +#168193 = EDGE_CURVE('',#168185,#168194,#168196,.T.); +#168194 = VERTEX_POINT('',#168195); +#168195 = CARTESIAN_POINT('',(97.103908,-101.7406,1.585)); +#168196 = LINE('',#168197,#168198); +#168197 = CARTESIAN_POINT('',(96.629392,-101.7406,1.585)); +#168198 = VECTOR('',#168199,1.); +#168199 = DIRECTION('',(1.,0.,0.)); +#168200 = ORIENTED_EDGE('',*,*,#168201,.T.); +#168201 = EDGE_CURVE('',#168194,#168202,#168204,.T.); +#168202 = VERTEX_POINT('',#168203); +#168203 = CARTESIAN_POINT('',(97.103908,-101.8606,1.585)); +#168204 = CIRCLE('',#168205,6.000000000043E-02); +#168205 = AXIS2_PLACEMENT_3D('',#168206,#168207,#168208); +#168206 = CARTESIAN_POINT('',(97.103908225588,-101.8006,1.585)); +#168207 = DIRECTION('',(0.,0.,-1.)); +#168208 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168209 = ORIENTED_EDGE('',*,*,#168210,.T.); +#168210 = EDGE_CURVE('',#168202,#168183,#168211,.T.); +#168211 = LINE('',#168212,#168213); +#168212 = CARTESIAN_POINT('',(97.103908,-101.8606,1.585)); +#168213 = VECTOR('',#168214,1.); +#168214 = DIRECTION('',(-1.,0.,0.)); +#168215 = PLANE('',#168216); +#168216 = AXIS2_PLACEMENT_3D('',#168217,#168218,#168219); +#168217 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168218 = DIRECTION('',(0.,0.,1.)); +#168219 = DIRECTION('',(1.,0.,-0.)); +#168220 = SHELL_BASED_SURFACE_MODEL('',(#168221)); +#168221 = OPEN_SHELL('',(#168222)); +#168222 = ADVANCED_FACE('',(#168223),#168259,.T.); +#168223 = FACE_BOUND('',#168224,.F.); +#168224 = EDGE_LOOP('',(#168225,#168236,#168244,#168253)); +#168225 = ORIENTED_EDGE('',*,*,#168226,.T.); +#168226 = EDGE_CURVE('',#168227,#168229,#168231,.T.); +#168227 = VERTEX_POINT('',#168228); +#168228 = CARTESIAN_POINT('',(100.629392,-101.8606,1.585)); +#168229 = VERTEX_POINT('',#168230); +#168230 = CARTESIAN_POINT('',(100.629392,-101.7406,1.585)); +#168231 = CIRCLE('',#168232,6.000000000042E-02); +#168232 = AXIS2_PLACEMENT_3D('',#168233,#168234,#168235); +#168233 = CARTESIAN_POINT('',(100.62939177441,-101.8006,1.585)); +#168234 = DIRECTION('',(0.,0.,-1.)); +#168235 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168236 = ORIENTED_EDGE('',*,*,#168237,.T.); +#168237 = EDGE_CURVE('',#168229,#168238,#168240,.T.); +#168238 = VERTEX_POINT('',#168239); +#168239 = CARTESIAN_POINT('',(101.103908,-101.7406,1.585)); +#168240 = LINE('',#168241,#168242); +#168241 = CARTESIAN_POINT('',(100.629392,-101.7406,1.585)); +#168242 = VECTOR('',#168243,1.); +#168243 = DIRECTION('',(1.,0.,0.)); +#168244 = ORIENTED_EDGE('',*,*,#168245,.T.); +#168245 = EDGE_CURVE('',#168238,#168246,#168248,.T.); +#168246 = VERTEX_POINT('',#168247); +#168247 = CARTESIAN_POINT('',(101.103908,-101.8606,1.585)); +#168248 = CIRCLE('',#168249,6.000000000043E-02); +#168249 = AXIS2_PLACEMENT_3D('',#168250,#168251,#168252); +#168250 = CARTESIAN_POINT('',(101.10390822558,-101.8006,1.585)); +#168251 = DIRECTION('',(0.,0.,-1.)); +#168252 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168253 = ORIENTED_EDGE('',*,*,#168254,.T.); +#168254 = EDGE_CURVE('',#168246,#168227,#168255,.T.); +#168255 = LINE('',#168256,#168257); +#168256 = CARTESIAN_POINT('',(101.103908,-101.8606,1.585)); +#168257 = VECTOR('',#168258,1.); +#168258 = DIRECTION('',(-1.,0.,0.)); +#168259 = PLANE('',#168260); +#168260 = AXIS2_PLACEMENT_3D('',#168261,#168262,#168263); +#168261 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168262 = DIRECTION('',(0.,0.,1.)); +#168263 = DIRECTION('',(1.,0.,-0.)); +#168264 = SHELL_BASED_SURFACE_MODEL('',(#168265)); +#168265 = OPEN_SHELL('',(#168266)); +#168266 = ADVANCED_FACE('',(#168267),#168303,.T.); +#168267 = FACE_BOUND('',#168268,.F.); +#168268 = EDGE_LOOP('',(#168269,#168280,#168288,#168297)); +#168269 = ORIENTED_EDGE('',*,*,#168270,.T.); +#168270 = EDGE_CURVE('',#168271,#168273,#168275,.T.); +#168271 = VERTEX_POINT('',#168272); +#168272 = CARTESIAN_POINT('',(104.629392,-101.8606,1.585)); +#168273 = VERTEX_POINT('',#168274); +#168274 = CARTESIAN_POINT('',(104.629392,-101.7406,1.585)); +#168275 = CIRCLE('',#168276,6.000000000042E-02); +#168276 = AXIS2_PLACEMENT_3D('',#168277,#168278,#168279); +#168277 = CARTESIAN_POINT('',(104.62939177441,-101.8006,1.585)); +#168278 = DIRECTION('',(0.,0.,-1.)); +#168279 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168280 = ORIENTED_EDGE('',*,*,#168281,.T.); +#168281 = EDGE_CURVE('',#168273,#168282,#168284,.T.); +#168282 = VERTEX_POINT('',#168283); +#168283 = CARTESIAN_POINT('',(105.103908,-101.7406,1.585)); +#168284 = LINE('',#168285,#168286); +#168285 = CARTESIAN_POINT('',(104.629392,-101.7406,1.585)); +#168286 = VECTOR('',#168287,1.); +#168287 = DIRECTION('',(1.,0.,0.)); +#168288 = ORIENTED_EDGE('',*,*,#168289,.T.); +#168289 = EDGE_CURVE('',#168282,#168290,#168292,.T.); +#168290 = VERTEX_POINT('',#168291); +#168291 = CARTESIAN_POINT('',(105.103908,-101.8606,1.585)); +#168292 = CIRCLE('',#168293,6.000000000043E-02); +#168293 = AXIS2_PLACEMENT_3D('',#168294,#168295,#168296); +#168294 = CARTESIAN_POINT('',(105.10390822558,-101.8006,1.585)); +#168295 = DIRECTION('',(0.,0.,-1.)); +#168296 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168297 = ORIENTED_EDGE('',*,*,#168298,.T.); +#168298 = EDGE_CURVE('',#168290,#168271,#168299,.T.); +#168299 = LINE('',#168300,#168301); +#168300 = CARTESIAN_POINT('',(105.103908,-101.8606,1.585)); +#168301 = VECTOR('',#168302,1.); +#168302 = DIRECTION('',(-1.,0.,0.)); +#168303 = PLANE('',#168304); +#168304 = AXIS2_PLACEMENT_3D('',#168305,#168306,#168307); +#168305 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168306 = DIRECTION('',(0.,0.,1.)); +#168307 = DIRECTION('',(1.,0.,-0.)); +#168308 = SHELL_BASED_SURFACE_MODEL('',(#168309)); +#168309 = OPEN_SHELL('',(#168310)); +#168310 = ADVANCED_FACE('',(#168311),#168347,.T.); +#168311 = FACE_BOUND('',#168312,.F.); +#168312 = EDGE_LOOP('',(#168313,#168324,#168332,#168341)); +#168313 = ORIENTED_EDGE('',*,*,#168314,.T.); +#168314 = EDGE_CURVE('',#168315,#168317,#168319,.T.); +#168315 = VERTEX_POINT('',#168316); +#168316 = CARTESIAN_POINT('',(108.129392,-101.8606,1.585)); +#168317 = VERTEX_POINT('',#168318); +#168318 = CARTESIAN_POINT('',(108.129392,-101.7406,1.585)); +#168319 = CIRCLE('',#168320,6.000000000042E-02); +#168320 = AXIS2_PLACEMENT_3D('',#168321,#168322,#168323); +#168321 = CARTESIAN_POINT('',(108.12939177441,-101.8006,1.585)); +#168322 = DIRECTION('',(0.,0.,-1.)); +#168323 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168324 = ORIENTED_EDGE('',*,*,#168325,.T.); +#168325 = EDGE_CURVE('',#168317,#168326,#168328,.T.); +#168326 = VERTEX_POINT('',#168327); +#168327 = CARTESIAN_POINT('',(108.603908,-101.7406,1.585)); +#168328 = LINE('',#168329,#168330); +#168329 = CARTESIAN_POINT('',(108.129392,-101.7406,1.585)); +#168330 = VECTOR('',#168331,1.); +#168331 = DIRECTION('',(1.,0.,0.)); +#168332 = ORIENTED_EDGE('',*,*,#168333,.T.); +#168333 = EDGE_CURVE('',#168326,#168334,#168336,.T.); +#168334 = VERTEX_POINT('',#168335); +#168335 = CARTESIAN_POINT('',(108.603908,-101.8606,1.585)); +#168336 = CIRCLE('',#168337,6.000000000043E-02); +#168337 = AXIS2_PLACEMENT_3D('',#168338,#168339,#168340); +#168338 = CARTESIAN_POINT('',(108.60390822558,-101.8006,1.585)); +#168339 = DIRECTION('',(0.,0.,-1.)); +#168340 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168341 = ORIENTED_EDGE('',*,*,#168342,.T.); +#168342 = EDGE_CURVE('',#168334,#168315,#168343,.T.); +#168343 = LINE('',#168344,#168345); +#168344 = CARTESIAN_POINT('',(108.603908,-101.8606,1.585)); +#168345 = VECTOR('',#168346,1.); +#168346 = DIRECTION('',(-1.,0.,0.)); +#168347 = PLANE('',#168348); +#168348 = AXIS2_PLACEMENT_3D('',#168349,#168350,#168351); +#168349 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168350 = DIRECTION('',(0.,0.,1.)); +#168351 = DIRECTION('',(1.,0.,-0.)); +#168352 = SHELL_BASED_SURFACE_MODEL('',(#168353)); +#168353 = OPEN_SHELL('',(#168354)); +#168354 = ADVANCED_FACE('',(#168355),#168391,.T.); +#168355 = FACE_BOUND('',#168356,.F.); +#168356 = EDGE_LOOP('',(#168357,#168368,#168376,#168385)); +#168357 = ORIENTED_EDGE('',*,*,#168358,.T.); +#168358 = EDGE_CURVE('',#168359,#168361,#168363,.T.); +#168359 = VERTEX_POINT('',#168360); +#168360 = CARTESIAN_POINT('',(112.129392,-101.8606,1.585)); +#168361 = VERTEX_POINT('',#168362); +#168362 = CARTESIAN_POINT('',(112.129392,-101.7406,1.585)); +#168363 = CIRCLE('',#168364,6.000000000042E-02); +#168364 = AXIS2_PLACEMENT_3D('',#168365,#168366,#168367); +#168365 = CARTESIAN_POINT('',(112.12939177441,-101.8006,1.585)); +#168366 = DIRECTION('',(0.,0.,-1.)); +#168367 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168368 = ORIENTED_EDGE('',*,*,#168369,.T.); +#168369 = EDGE_CURVE('',#168361,#168370,#168372,.T.); +#168370 = VERTEX_POINT('',#168371); +#168371 = CARTESIAN_POINT('',(112.603908,-101.7406,1.585)); +#168372 = LINE('',#168373,#168374); +#168373 = CARTESIAN_POINT('',(112.129392,-101.7406,1.585)); +#168374 = VECTOR('',#168375,1.); +#168375 = DIRECTION('',(1.,0.,0.)); +#168376 = ORIENTED_EDGE('',*,*,#168377,.T.); +#168377 = EDGE_CURVE('',#168370,#168378,#168380,.T.); +#168378 = VERTEX_POINT('',#168379); +#168379 = CARTESIAN_POINT('',(112.603908,-101.8606,1.585)); +#168380 = CIRCLE('',#168381,6.000000000043E-02); +#168381 = AXIS2_PLACEMENT_3D('',#168382,#168383,#168384); +#168382 = CARTESIAN_POINT('',(112.60390822558,-101.8006,1.585)); +#168383 = DIRECTION('',(0.,0.,-1.)); +#168384 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168385 = ORIENTED_EDGE('',*,*,#168386,.T.); +#168386 = EDGE_CURVE('',#168378,#168359,#168387,.T.); +#168387 = LINE('',#168388,#168389); +#168388 = CARTESIAN_POINT('',(112.603908,-101.8606,1.585)); +#168389 = VECTOR('',#168390,1.); +#168390 = DIRECTION('',(-1.,0.,0.)); +#168391 = PLANE('',#168392); +#168392 = AXIS2_PLACEMENT_3D('',#168393,#168394,#168395); +#168393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168394 = DIRECTION('',(0.,0.,1.)); +#168395 = DIRECTION('',(1.,0.,-0.)); +#168396 = SHELL_BASED_SURFACE_MODEL('',(#168397)); +#168397 = OPEN_SHELL('',(#168398)); +#168398 = ADVANCED_FACE('',(#168399),#168435,.T.); +#168399 = FACE_BOUND('',#168400,.F.); +#168400 = EDGE_LOOP('',(#168401,#168412,#168420,#168429)); +#168401 = ORIENTED_EDGE('',*,*,#168402,.T.); +#168402 = EDGE_CURVE('',#168403,#168405,#168407,.T.); +#168403 = VERTEX_POINT('',#168404); +#168404 = CARTESIAN_POINT('',(179.279392,-101.8606,1.585)); +#168405 = VERTEX_POINT('',#168406); +#168406 = CARTESIAN_POINT('',(179.279392,-101.7406,1.585)); +#168407 = CIRCLE('',#168408,6.000000000043E-02); +#168408 = AXIS2_PLACEMENT_3D('',#168409,#168410,#168411); +#168409 = CARTESIAN_POINT('',(179.27939177441,-101.8006,1.585)); +#168410 = DIRECTION('',(0.,0.,-1.)); +#168411 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#168412 = ORIENTED_EDGE('',*,*,#168413,.T.); +#168413 = EDGE_CURVE('',#168405,#168414,#168416,.T.); +#168414 = VERTEX_POINT('',#168415); +#168415 = CARTESIAN_POINT('',(179.753908,-101.7406,1.585)); +#168416 = LINE('',#168417,#168418); +#168417 = CARTESIAN_POINT('',(179.279392,-101.7406,1.585)); +#168418 = VECTOR('',#168419,1.); +#168419 = DIRECTION('',(1.,0.,0.)); +#168420 = ORIENTED_EDGE('',*,*,#168421,.T.); +#168421 = EDGE_CURVE('',#168414,#168422,#168424,.T.); +#168422 = VERTEX_POINT('',#168423); +#168423 = CARTESIAN_POINT('',(179.753908,-101.8606,1.585)); +#168424 = CIRCLE('',#168425,6.000000000042E-02); +#168425 = AXIS2_PLACEMENT_3D('',#168426,#168427,#168428); +#168426 = CARTESIAN_POINT('',(179.75390822558,-101.8006,1.585)); +#168427 = DIRECTION('',(0.,0.,-1.)); +#168428 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#168429 = ORIENTED_EDGE('',*,*,#168430,.T.); +#168430 = EDGE_CURVE('',#168422,#168403,#168431,.T.); +#168431 = LINE('',#168432,#168433); +#168432 = CARTESIAN_POINT('',(179.753908,-101.8606,1.585)); +#168433 = VECTOR('',#168434,1.); +#168434 = DIRECTION('',(-1.,0.,0.)); +#168435 = PLANE('',#168436); +#168436 = AXIS2_PLACEMENT_3D('',#168437,#168438,#168439); +#168437 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168438 = DIRECTION('',(0.,0.,1.)); +#168439 = DIRECTION('',(1.,0.,-0.)); +#168440 = SHELL_BASED_SURFACE_MODEL('',(#168441)); +#168441 = OPEN_SHELL('',(#168442)); +#168442 = ADVANCED_FACE('',(#168443),#168602,.T.); +#168443 = FACE_BOUND('',#168444,.F.); +#168444 = EDGE_LOOP('',(#168445,#168456,#168464,#168472,#168480,#168488, + #168496,#168504,#168513,#168521,#168530,#168538,#168546,#168554, + #168563,#168571,#168579,#168587,#168596)); +#168445 = ORIENTED_EDGE('',*,*,#168446,.T.); +#168446 = EDGE_CURVE('',#168447,#168449,#168451,.T.); +#168447 = VERTEX_POINT('',#168448); +#168448 = CARTESIAN_POINT('',(189.577157,-100.758456,1.585)); +#168449 = VERTEX_POINT('',#168450); +#168450 = CARTESIAN_POINT('',(190.086552,-100.767786,1.585)); +#168451 = CIRCLE('',#168452,0.450326844012); +#168452 = AXIS2_PLACEMENT_3D('',#168453,#168454,#168455); +#168453 = CARTESIAN_POINT('',(189.8250540301,-101.1344098919,1.585)); +#168454 = DIRECTION('',(0.,0.,-1.)); +#168455 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#168456 = ORIENTED_EDGE('',*,*,#168457,.T.); +#168457 = EDGE_CURVE('',#168449,#168458,#168460,.T.); +#168458 = VERTEX_POINT('',#168459); +#168459 = CARTESIAN_POINT('',(190.150005,-100.833316,1.585)); +#168460 = LINE('',#168461,#168462); +#168461 = CARTESIAN_POINT('',(190.086552,-100.767786,1.585)); +#168462 = VECTOR('',#168463,1.); +#168463 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#168464 = ORIENTED_EDGE('',*,*,#168465,.T.); +#168465 = EDGE_CURVE('',#168458,#168466,#168468,.T.); +#168466 = VERTEX_POINT('',#168467); +#168467 = CARTESIAN_POINT('',(190.208066,-100.953763,1.585)); +#168468 = LINE('',#168469,#168470); +#168469 = CARTESIAN_POINT('',(190.150005,-100.833316,1.585)); +#168470 = VECTOR('',#168471,1.); +#168471 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#168472 = ORIENTED_EDGE('',*,*,#168473,.T.); +#168473 = EDGE_CURVE('',#168466,#168474,#168476,.T.); +#168474 = VERTEX_POINT('',#168475); +#168475 = CARTESIAN_POINT('',(190.207307,-101.080095,1.585)); +#168476 = LINE('',#168477,#168478); +#168477 = CARTESIAN_POINT('',(190.208066,-100.953763,1.585)); +#168478 = VECTOR('',#168479,1.); +#168479 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#168480 = ORIENTED_EDGE('',*,*,#168481,.T.); +#168481 = EDGE_CURVE('',#168474,#168482,#168484,.T.); +#168482 = VERTEX_POINT('',#168483); +#168483 = CARTESIAN_POINT('',(190.149249,-101.248158,1.585)); +#168484 = LINE('',#168485,#168486); +#168485 = CARTESIAN_POINT('',(190.207307,-101.080095,1.585)); +#168486 = VECTOR('',#168487,1.); +#168487 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#168488 = ORIENTED_EDGE('',*,*,#168489,.T.); +#168489 = EDGE_CURVE('',#168482,#168490,#168492,.T.); +#168490 = VERTEX_POINT('',#168491); +#168491 = CARTESIAN_POINT('',(189.696526,-101.702919,1.585)); +#168492 = LINE('',#168493,#168494); +#168493 = CARTESIAN_POINT('',(190.149249,-101.248158,1.585)); +#168494 = VECTOR('',#168495,1.); +#168495 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#168496 = ORIENTED_EDGE('',*,*,#168497,.T.); +#168497 = EDGE_CURVE('',#168490,#168498,#168500,.T.); +#168498 = VERTEX_POINT('',#168499); +#168499 = CARTESIAN_POINT('',(190.149139,-101.70436,1.585)); +#168500 = LINE('',#168501,#168502); +#168501 = CARTESIAN_POINT('',(189.696526,-101.702919,1.585)); +#168502 = VECTOR('',#168503,1.); +#168503 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#168504 = ORIENTED_EDGE('',*,*,#168505,.T.); +#168505 = EDGE_CURVE('',#168498,#168506,#168508,.T.); +#168506 = VERTEX_POINT('',#168507); +#168507 = CARTESIAN_POINT('',(190.134507,-101.852919,1.585)); +#168508 = CIRCLE('',#168509,7.500006711464E-02); +#168509 = AXIS2_PLACEMENT_3D('',#168510,#168511,#168512); +#168510 = CARTESIAN_POINT('',(190.13450706711,-101.7779189328,1.585)); +#168511 = DIRECTION('',(0.,0.,-1.)); +#168512 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#168513 = ORIENTED_EDGE('',*,*,#168514,.T.); +#168514 = EDGE_CURVE('',#168506,#168515,#168517,.T.); +#168515 = VERTEX_POINT('',#168516); +#168516 = CARTESIAN_POINT('',(189.500828,-101.851478,1.585)); +#168517 = LINE('',#168518,#168519); +#168518 = CARTESIAN_POINT('',(190.134507,-101.852919,1.585)); +#168519 = VECTOR('',#168520,1.); +#168520 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#168521 = ORIENTED_EDGE('',*,*,#168522,.T.); +#168522 = EDGE_CURVE('',#168515,#168523,#168525,.T.); +#168523 = VERTEX_POINT('',#168524); +#168524 = CARTESIAN_POINT('',(189.462427,-101.724886,1.585)); +#168525 = CIRCLE('',#168526,7.500021013112E-02); +#168526 = AXIS2_PLACEMENT_3D('',#168527,#168528,#168529); +#168527 = CARTESIAN_POINT('',(189.5154603167,-101.7779189976,1.585)); +#168528 = DIRECTION('',(0.,0.,-1.)); +#168529 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#168530 = ORIENTED_EDGE('',*,*,#168531,.T.); +#168531 = EDGE_CURVE('',#168523,#168532,#168534,.T.); +#168532 = VERTEX_POINT('',#168533); +#168533 = CARTESIAN_POINT('',(190.021335,-101.165976,1.585)); +#168534 = LINE('',#168535,#168536); +#168535 = CARTESIAN_POINT('',(189.462427,-101.724886,1.585)); +#168536 = VECTOR('',#168537,1.); +#168537 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#168538 = ORIENTED_EDGE('',*,*,#168539,.T.); +#168539 = EDGE_CURVE('',#168532,#168540,#168542,.T.); +#168540 = VERTEX_POINT('',#168541); +#168541 = CARTESIAN_POINT('',(190.059507,-101.051463,1.585)); +#168542 = LINE('',#168543,#168544); +#168543 = CARTESIAN_POINT('',(190.021335,-101.165976,1.585)); +#168544 = VECTOR('',#168545,1.); +#168545 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#168546 = ORIENTED_EDGE('',*,*,#168547,.T.); +#168547 = EDGE_CURVE('',#168540,#168548,#168550,.T.); +#168548 = VERTEX_POINT('',#168549); +#168549 = CARTESIAN_POINT('',(190.059507,-100.9861,1.585)); +#168550 = LINE('',#168551,#168552); +#168551 = CARTESIAN_POINT('',(190.059507,-101.051463,1.585)); +#168552 = VECTOR('',#168553,1.); +#168553 = DIRECTION('',(0.,1.,0.)); +#168554 = ORIENTED_EDGE('',*,*,#168555,.T.); +#168555 = EDGE_CURVE('',#168548,#168556,#168558,.T.); +#168556 = VERTEX_POINT('',#168557); +#168557 = CARTESIAN_POINT('',(189.926326,-100.852919,1.585)); +#168558 = CIRCLE('',#168559,0.18686440374); +#168559 = AXIS2_PLACEMENT_3D('',#168560,#168561,#168562); +#168560 = CARTESIAN_POINT('',(189.87879,-101.033636,1.585)); +#168561 = DIRECTION('',(0.,0.,1.)); +#168562 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#168563 = ORIENTED_EDGE('',*,*,#168564,.T.); +#168564 = EDGE_CURVE('',#168556,#168565,#168567,.T.); +#168565 = VERTEX_POINT('',#168566); +#168566 = CARTESIAN_POINT('',(189.723641,-100.852919,1.585)); +#168567 = LINE('',#168568,#168569); +#168568 = CARTESIAN_POINT('',(189.926326,-100.852919,1.585)); +#168569 = VECTOR('',#168570,1.); +#168570 = DIRECTION('',(-1.,0.,0.)); +#168571 = ORIENTED_EDGE('',*,*,#168572,.T.); +#168572 = EDGE_CURVE('',#168565,#168573,#168575,.T.); +#168573 = VERTEX_POINT('',#168574); +#168574 = CARTESIAN_POINT('',(189.655125,-100.887177,1.585)); +#168575 = LINE('',#168576,#168577); +#168576 = CARTESIAN_POINT('',(189.723641,-100.852919,1.585)); +#168577 = VECTOR('',#168578,1.); +#168578 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#168579 = ORIENTED_EDGE('',*,*,#168580,.T.); +#168580 = EDGE_CURVE('',#168573,#168581,#168583,.T.); +#168581 = VERTEX_POINT('',#168582); +#168582 = CARTESIAN_POINT('',(189.604747,-100.935517,1.585)); +#168583 = LINE('',#168584,#168585); +#168584 = CARTESIAN_POINT('',(189.655125,-100.887177,1.585)); +#168585 = VECTOR('',#168586,1.); +#168586 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#168587 = ORIENTED_EDGE('',*,*,#168588,.T.); +#168588 = EDGE_CURVE('',#168581,#168589,#168591,.T.); +#168589 = VERTEX_POINT('',#168590); +#168590 = CARTESIAN_POINT('',(189.510046,-100.820124,1.585)); +#168591 = CIRCLE('',#168592,7.499996838528E-02); +#168592 = AXIS2_PLACEMENT_3D('',#168593,#168594,#168595); +#168593 = CARTESIAN_POINT('',(189.563079,-100.8731569724,1.585)); +#168594 = DIRECTION('',(0.,0.,-1.)); +#168595 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#168596 = ORIENTED_EDGE('',*,*,#168597,.T.); +#168597 = EDGE_CURVE('',#168589,#168447,#168598,.T.); +#168598 = LINE('',#168599,#168600); +#168599 = CARTESIAN_POINT('',(189.510046,-100.820124,1.585)); +#168600 = VECTOR('',#168601,1.); +#168601 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#168602 = PLANE('',#168603); +#168603 = AXIS2_PLACEMENT_3D('',#168604,#168605,#168606); +#168604 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168605 = DIRECTION('',(0.,0.,1.)); +#168606 = DIRECTION('',(1.,0.,-0.)); +#168607 = SHELL_BASED_SURFACE_MODEL('',(#168608)); +#168608 = OPEN_SHELL('',(#168609)); +#168609 = ADVANCED_FACE('',(#168610),#168728,.T.); +#168610 = FACE_BOUND('',#168611,.F.); +#168611 = EDGE_LOOP('',(#168612,#168623,#168631,#168639,#168648,#168656, + #168664,#168673,#168681,#168689,#168697,#168706,#168714,#168722)); +#168612 = ORIENTED_EDGE('',*,*,#168613,.T.); +#168613 = EDGE_CURVE('',#168614,#168616,#168618,.T.); +#168614 = VERTEX_POINT('',#168615); +#168615 = CARTESIAN_POINT('',(188.759506,-100.715559,1.585)); +#168616 = VERTEX_POINT('',#168617); +#168617 = CARTESIAN_POINT('',(188.876174,-100.777919,1.585)); +#168618 = CIRCLE('',#168619,7.500000000002E-02); +#168619 = AXIS2_PLACEMENT_3D('',#168620,#168621,#168622); +#168620 = CARTESIAN_POINT('',(188.801174,-100.7779190655,1.585)); +#168621 = DIRECTION('',(0.,0.,-1.)); +#168622 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#168623 = ORIENTED_EDGE('',*,*,#168624,.T.); +#168624 = EDGE_CURVE('',#168616,#168625,#168627,.T.); +#168625 = VERTEX_POINT('',#168626); +#168626 = CARTESIAN_POINT('',(188.876174,-101.311138,1.585)); +#168627 = LINE('',#168628,#168629); +#168628 = CARTESIAN_POINT('',(188.876174,-100.777919,1.585)); +#168629 = VECTOR('',#168630,1.); +#168630 = DIRECTION('',(0.,-1.,0.)); +#168631 = ORIENTED_EDGE('',*,*,#168632,.T.); +#168632 = EDGE_CURVE('',#168625,#168633,#168635,.T.); +#168633 = VERTEX_POINT('',#168634); +#168634 = CARTESIAN_POINT('',(189.140458,-101.048892,1.585)); +#168635 = LINE('',#168636,#168637); +#168636 = CARTESIAN_POINT('',(188.876174,-101.311138,1.585)); +#168637 = VECTOR('',#168638,1.); +#168638 = DIRECTION('',(0.709838408842,0.704364559963,0.)); +#168639 = ORIENTED_EDGE('',*,*,#168640,.T.); +#168640 = EDGE_CURVE('',#168633,#168641,#168643,.T.); +#168641 = VERTEX_POINT('',#168642); +#168642 = CARTESIAN_POINT('',(189.235159,-101.164285,1.585)); +#168643 = CIRCLE('',#168644,7.500003178657E-02); +#168644 = AXIS2_PLACEMENT_3D('',#168645,#168646,#168647); +#168645 = CARTESIAN_POINT('',(189.1821255,-101.1112524378,1.585)); +#168646 = DIRECTION('',(0.,0.,-1.)); +#168647 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#168648 = ORIENTED_EDGE('',*,*,#168649,.T.); +#168649 = EDGE_CURVE('',#168641,#168650,#168652,.T.); +#168650 = VERTEX_POINT('',#168651); +#168651 = CARTESIAN_POINT('',(188.99544,-101.404003,1.585)); +#168652 = LINE('',#168653,#168654); +#168653 = CARTESIAN_POINT('',(189.235159,-101.164285,1.585)); +#168654 = VECTOR('',#168655,1.); +#168655 = DIRECTION('',(-0.707108256054,-0.707105306316,0.)); +#168656 = ORIENTED_EDGE('',*,*,#168657,.T.); +#168657 = EDGE_CURVE('',#168650,#168658,#168660,.T.); +#168658 = VERTEX_POINT('',#168659); +#168659 = CARTESIAN_POINT('',(189.249753,-101.745489,1.585)); +#168660 = LINE('',#168661,#168662); +#168661 = CARTESIAN_POINT('',(188.99544,-101.404003,1.585)); +#168662 = VECTOR('',#168663,1.); +#168663 = DIRECTION('',(0.5972886794,-0.802026329655,0.)); +#168664 = ORIENTED_EDGE('',*,*,#168665,.T.); +#168665 = EDGE_CURVE('',#168658,#168666,#168668,.T.); +#168666 = VERTEX_POINT('',#168667); +#168667 = CARTESIAN_POINT('',(189.122126,-101.822919,1.585)); +#168668 = CIRCLE('',#168669,7.500042710846E-02); +#168669 = AXIS2_PLACEMENT_3D('',#168670,#168671,#168672); +#168670 = CARTESIAN_POINT('',(189.18212611876,-101.7779184465,1.585)); +#168671 = DIRECTION('',(0.,0.,-1.)); +#168672 = DIRECTION('',(0.901686614921,0.432390157695,0.)); +#168673 = ORIENTED_EDGE('',*,*,#168674,.T.); +#168674 = EDGE_CURVE('',#168666,#168675,#168677,.T.); +#168675 = VERTEX_POINT('',#168676); +#168676 = CARTESIAN_POINT('',(188.888297,-101.511146,1.585)); +#168677 = LINE('',#168678,#168679); +#168678 = CARTESIAN_POINT('',(189.122126,-101.822919,1.585)); +#168679 = VECTOR('',#168680,1.); +#168680 = DIRECTION('',(-0.599998768333,0.800000923749,0.)); +#168681 = ORIENTED_EDGE('',*,*,#168682,.T.); +#168682 = EDGE_CURVE('',#168675,#168683,#168685,.T.); +#168683 = VERTEX_POINT('',#168684); +#168684 = CARTESIAN_POINT('',(188.876174,-101.52327,1.585)); +#168685 = LINE('',#168686,#168687); +#168686 = CARTESIAN_POINT('',(188.888297,-101.511146,1.585)); +#168687 = VECTOR('',#168688,1.); +#168688 = DIRECTION('',(-0.707077617935,-0.707135943235,0.)); +#168689 = ORIENTED_EDGE('',*,*,#168690,.T.); +#168690 = EDGE_CURVE('',#168683,#168691,#168693,.T.); +#168691 = VERTEX_POINT('',#168692); +#168692 = CARTESIAN_POINT('',(188.874733,-101.792551,1.585)); +#168693 = LINE('',#168694,#168695); +#168694 = CARTESIAN_POINT('',(188.876174,-101.52327,1.585)); +#168695 = VECTOR('',#168696,1.); +#168696 = DIRECTION('',(-5.351210698141E-03,-0.99998568217,0.)); +#168697 = ORIENTED_EDGE('',*,*,#168698,.T.); +#168698 = EDGE_CURVE('',#168691,#168699,#168701,.T.); +#168699 = VERTEX_POINT('',#168700); +#168700 = CARTESIAN_POINT('',(188.726174,-101.777919,1.585)); +#168701 = CIRCLE('',#168702,7.500006711465E-02); +#168702 = AXIS2_PLACEMENT_3D('',#168703,#168704,#168705); +#168703 = CARTESIAN_POINT('',(188.80117406711,-101.7779190671,1.585)); +#168704 = DIRECTION('',(-0.,0.,-1.)); +#168705 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#168706 = ORIENTED_EDGE('',*,*,#168707,.T.); +#168707 = EDGE_CURVE('',#168699,#168708,#168710,.T.); +#168708 = VERTEX_POINT('',#168709); +#168709 = CARTESIAN_POINT('',(188.727615,-100.763287,1.585)); +#168710 = LINE('',#168711,#168712); +#168711 = CARTESIAN_POINT('',(188.726174,-101.777919,1.585)); +#168712 = VECTOR('',#168713,1.); +#168713 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#168714 = ORIENTED_EDGE('',*,*,#168715,.T.); +#168715 = EDGE_CURVE('',#168708,#168716,#168718,.T.); +#168716 = VERTEX_POINT('',#168717); +#168717 = CARTESIAN_POINT('',(188.738814,-100.736251,1.585)); +#168718 = LINE('',#168719,#168720); +#168719 = CARTESIAN_POINT('',(188.727615,-100.763287,1.585)); +#168720 = VECTOR('',#168721,1.); +#168721 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#168722 = ORIENTED_EDGE('',*,*,#168723,.T.); +#168723 = EDGE_CURVE('',#168716,#168614,#168724,.T.); +#168724 = LINE('',#168725,#168726); +#168725 = CARTESIAN_POINT('',(188.738814,-100.736251,1.585)); +#168726 = VECTOR('',#168727,1.); +#168727 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#168728 = PLANE('',#168729); +#168729 = AXIS2_PLACEMENT_3D('',#168730,#168731,#168732); +#168730 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168731 = DIRECTION('',(0.,0.,1.)); +#168732 = DIRECTION('',(1.,0.,-0.)); +#168733 = SHELL_BASED_SURFACE_MODEL('',(#168734)); +#168734 = OPEN_SHELL('',(#168735)); +#168735 = ADVANCED_FACE('',(#168736,#168852),#168935,.T.); +#168736 = FACE_BOUND('',#168737,.F.); +#168737 = EDGE_LOOP('',(#168738,#168749,#168757,#168765,#168773,#168781, + #168789,#168797,#168805,#168813,#168821,#168829,#168837,#168846)); +#168738 = ORIENTED_EDGE('',*,*,#168739,.T.); +#168739 = EDGE_CURVE('',#168740,#168742,#168744,.T.); +#168740 = VERTEX_POINT('',#168741); +#168741 = CARTESIAN_POINT('',(186.822853,-100.763287,1.585)); +#168742 = VERTEX_POINT('',#168743); +#168743 = CARTESIAN_POINT('',(186.896412,-100.702919,1.585)); +#168744 = CIRCLE('',#168745,7.500074938985E-02); +#168745 = AXIS2_PLACEMENT_3D('',#168746,#168747,#168748); +#168746 = CARTESIAN_POINT('',(186.89641246611,-100.7779197493,1.585)); +#168747 = DIRECTION('',(0.,0.,-1.)); +#168748 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#168749 = ORIENTED_EDGE('',*,*,#168750,.T.); +#168750 = EDGE_CURVE('',#168742,#168751,#168753,.T.); +#168751 = VERTEX_POINT('',#168752); +#168752 = CARTESIAN_POINT('',(187.141912,-100.703648,1.585)); +#168753 = LINE('',#168754,#168755); +#168754 = CARTESIAN_POINT('',(186.896412,-100.702919,1.585)); +#168755 = VECTOR('',#168756,1.); +#168756 = DIRECTION('',(0.999995591212,-2.969437010186E-03,0.)); +#168757 = ORIENTED_EDGE('',*,*,#168758,.T.); +#168758 = EDGE_CURVE('',#168751,#168759,#168761,.T.); +#168759 = VERTEX_POINT('',#168760); +#168760 = CARTESIAN_POINT('',(187.319032,-100.763178,1.585)); +#168761 = LINE('',#168762,#168763); +#168762 = CARTESIAN_POINT('',(187.141912,-100.703648,1.585)); +#168763 = VECTOR('',#168764,1.); +#168764 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#168765 = ORIENTED_EDGE('',*,*,#168766,.T.); +#168766 = EDGE_CURVE('',#168759,#168767,#168769,.T.); +#168767 = VERTEX_POINT('',#168768); +#168768 = CARTESIAN_POINT('',(187.435721,-100.88094,1.585)); +#168769 = LINE('',#168770,#168771); +#168770 = CARTESIAN_POINT('',(187.319032,-100.763178,1.585)); +#168771 = VECTOR('',#168772,1.); +#168772 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#168773 = ORIENTED_EDGE('',*,*,#168774,.T.); +#168774 = EDGE_CURVE('',#168767,#168775,#168777,.T.); +#168775 = VERTEX_POINT('',#168776); +#168776 = CARTESIAN_POINT('',(187.492982,-100.997824,1.585)); +#168777 = LINE('',#168778,#168779); +#168778 = CARTESIAN_POINT('',(187.435721,-100.88094,1.585)); +#168779 = VECTOR('',#168780,1.); +#168780 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#168781 = ORIENTED_EDGE('',*,*,#168782,.T.); +#168782 = EDGE_CURVE('',#168775,#168783,#168785,.T.); +#168783 = VERTEX_POINT('',#168784); +#168784 = CARTESIAN_POINT('',(187.54284,-101.20649,1.585)); +#168785 = LINE('',#168786,#168787); +#168786 = CARTESIAN_POINT('',(187.492982,-100.997824,1.585)); +#168787 = VECTOR('',#168788,1.); +#168788 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#168789 = ORIENTED_EDGE('',*,*,#168790,.T.); +#168790 = EDGE_CURVE('',#168783,#168791,#168793,.T.); +#168791 = VERTEX_POINT('',#168792); +#168792 = CARTESIAN_POINT('',(187.540601,-101.367537,1.585)); +#168793 = LINE('',#168794,#168795); +#168794 = CARTESIAN_POINT('',(187.54284,-101.20649,1.585)); +#168795 = VECTOR('',#168796,1.); +#168796 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#168797 = ORIENTED_EDGE('',*,*,#168798,.T.); +#168798 = EDGE_CURVE('',#168791,#168799,#168801,.T.); +#168799 = VERTEX_POINT('',#168800); +#168800 = CARTESIAN_POINT('',(187.487303,-101.573364,1.585)); +#168801 = LINE('',#168802,#168803); +#168802 = CARTESIAN_POINT('',(187.540601,-101.367537,1.585)); +#168803 = VECTOR('',#168804,1.); +#168804 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#168805 = ORIENTED_EDGE('',*,*,#168806,.T.); +#168806 = EDGE_CURVE('',#168799,#168807,#168809,.T.); +#168807 = VERTEX_POINT('',#168808); +#168808 = CARTESIAN_POINT('',(187.430353,-101.682344,1.585)); +#168809 = LINE('',#168810,#168811); +#168810 = CARTESIAN_POINT('',(187.487303,-101.573364,1.585)); +#168811 = VECTOR('',#168812,1.); +#168812 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#168813 = ORIENTED_EDGE('',*,*,#168814,.T.); +#168814 = EDGE_CURVE('',#168807,#168815,#168817,.T.); +#168815 = VERTEX_POINT('',#168816); +#168816 = CARTESIAN_POINT('',(187.314506,-101.795457,1.585)); +#168817 = LINE('',#168818,#168819); +#168818 = CARTESIAN_POINT('',(187.430353,-101.682344,1.585)); +#168819 = VECTOR('',#168820,1.); +#168820 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#168821 = ORIENTED_EDGE('',*,*,#168822,.T.); +#168822 = EDGE_CURVE('',#168815,#168823,#168825,.T.); +#168823 = VERTEX_POINT('',#168824); +#168824 = CARTESIAN_POINT('',(187.141912,-101.852189,1.585)); +#168825 = LINE('',#168826,#168827); +#168826 = CARTESIAN_POINT('',(187.314506,-101.795457,1.585)); +#168827 = VECTOR('',#168828,1.); +#168828 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#168829 = ORIENTED_EDGE('',*,*,#168830,.T.); +#168830 = EDGE_CURVE('',#168823,#168831,#168833,.T.); +#168831 = VERTEX_POINT('',#168832); +#168832 = CARTESIAN_POINT('',(186.88178,-101.851478,1.585)); +#168833 = LINE('',#168834,#168835); +#168834 = CARTESIAN_POINT('',(187.141912,-101.852189,1.585)); +#168835 = VECTOR('',#168836,1.); +#168836 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#168837 = ORIENTED_EDGE('',*,*,#168838,.T.); +#168838 = EDGE_CURVE('',#168831,#168839,#168841,.T.); +#168839 = VERTEX_POINT('',#168840); +#168840 = CARTESIAN_POINT('',(186.821412,-101.777919,1.585)); +#168841 = CIRCLE('',#168842,7.500074938991E-02); +#168842 = AXIS2_PLACEMENT_3D('',#168843,#168844,#168845); +#168843 = CARTESIAN_POINT('',(186.89641274938,-101.7779185338,1.585)); +#168844 = DIRECTION('',(0.,0.,-1.)); +#168845 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#168846 = ORIENTED_EDGE('',*,*,#168847,.T.); +#168847 = EDGE_CURVE('',#168839,#168740,#168848,.T.); +#168848 = LINE('',#168849,#168850); +#168849 = CARTESIAN_POINT('',(186.821412,-101.777919,1.585)); +#168850 = VECTOR('',#168851,1.); +#168851 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#168852 = FACE_BOUND('',#168853,.F.); +#168853 = EDGE_LOOP('',(#168854,#168864,#168872,#168880,#168888,#168896, + #168904,#168913,#168921,#168929)); +#168854 = ORIENTED_EDGE('',*,*,#168855,.T.); +#168855 = EDGE_CURVE('',#168856,#168858,#168860,.T.); +#168856 = VERTEX_POINT('',#168857); +#168857 = CARTESIAN_POINT('',(187.23685,-100.89109,1.585)); +#168858 = VERTEX_POINT('',#168859); +#168859 = CARTESIAN_POINT('',(187.122337,-100.852919,1.585)); +#168860 = LINE('',#168861,#168862); +#168861 = CARTESIAN_POINT('',(187.23685,-100.89109,1.585)); +#168862 = VECTOR('',#168863,1.); +#168863 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#168864 = ORIENTED_EDGE('',*,*,#168865,.T.); +#168865 = EDGE_CURVE('',#168858,#168866,#168868,.T.); +#168866 = VERTEX_POINT('',#168867); +#168867 = CARTESIAN_POINT('',(186.971412,-100.852919,1.585)); +#168868 = LINE('',#168869,#168870); +#168869 = CARTESIAN_POINT('',(187.122337,-100.852919,1.585)); +#168870 = VECTOR('',#168871,1.); +#168871 = DIRECTION('',(-1.,0.,0.)); +#168872 = ORIENTED_EDGE('',*,*,#168873,.T.); +#168873 = EDGE_CURVE('',#168866,#168874,#168876,.T.); +#168874 = VERTEX_POINT('',#168875); +#168875 = CARTESIAN_POINT('',(186.971412,-101.702919,1.585)); +#168876 = LINE('',#168877,#168878); +#168877 = CARTESIAN_POINT('',(186.971412,-100.852919,1.585)); +#168878 = VECTOR('',#168879,1.); +#168879 = DIRECTION('',(0.,-1.,0.)); +#168880 = ORIENTED_EDGE('',*,*,#168881,.T.); +#168881 = EDGE_CURVE('',#168874,#168882,#168884,.T.); +#168882 = VERTEX_POINT('',#168883); +#168883 = CARTESIAN_POINT('',(187.122337,-101.702919,1.585)); +#168884 = LINE('',#168885,#168886); +#168885 = CARTESIAN_POINT('',(186.971412,-101.702919,1.585)); +#168886 = VECTOR('',#168887,1.); +#168887 = DIRECTION('',(1.,0.,0.)); +#168888 = ORIENTED_EDGE('',*,*,#168889,.T.); +#168889 = EDGE_CURVE('',#168882,#168890,#168892,.T.); +#168890 = VERTEX_POINT('',#168891); +#168891 = CARTESIAN_POINT('',(187.23685,-101.664747,1.585)); +#168892 = LINE('',#168893,#168894); +#168893 = CARTESIAN_POINT('',(187.122337,-101.702919,1.585)); +#168894 = VECTOR('',#168895,1.); +#168895 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#168896 = ORIENTED_EDGE('',*,*,#168897,.T.); +#168897 = EDGE_CURVE('',#168890,#168898,#168900,.T.); +#168898 = VERTEX_POINT('',#168899); +#168899 = CARTESIAN_POINT('',(187.310962,-101.590634,1.585)); +#168900 = LINE('',#168901,#168902); +#168901 = CARTESIAN_POINT('',(187.23685,-101.664747,1.585)); +#168902 = VECTOR('',#168903,1.); +#168903 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#168904 = ORIENTED_EDGE('',*,*,#168905,.T.); +#168905 = EDGE_CURVE('',#168898,#168906,#168908,.T.); +#168906 = VERTEX_POINT('',#168907); +#168907 = CARTESIAN_POINT('',(187.39284,-101.215724,1.585)); +#168908 = CIRCLE('',#168909,0.611719141131); +#168909 = AXIS2_PLACEMENT_3D('',#168910,#168911,#168912); +#168910 = CARTESIAN_POINT('',(186.78442796224,-101.2792464364,1.585)); +#168911 = DIRECTION('',(0.,0.,1.)); +#168912 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#168913 = ORIENTED_EDGE('',*,*,#168914,.T.); +#168914 = EDGE_CURVE('',#168906,#168915,#168917,.T.); +#168915 = VERTEX_POINT('',#168916); +#168916 = CARTESIAN_POINT('',(187.349456,-101.04219,1.585)); +#168917 = LINE('',#168918,#168919); +#168918 = CARTESIAN_POINT('',(187.39284,-101.215724,1.585)); +#168919 = VECTOR('',#168920,1.); +#168920 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#168921 = ORIENTED_EDGE('',*,*,#168922,.T.); +#168922 = EDGE_CURVE('',#168915,#168923,#168925,.T.); +#168923 = VERTEX_POINT('',#168924); +#168924 = CARTESIAN_POINT('',(187.310963,-100.965203,1.585)); +#168925 = LINE('',#168926,#168927); +#168926 = CARTESIAN_POINT('',(187.349456,-101.04219,1.585)); +#168927 = VECTOR('',#168928,1.); +#168928 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#168929 = ORIENTED_EDGE('',*,*,#168930,.T.); +#168930 = EDGE_CURVE('',#168923,#168856,#168931,.T.); +#168931 = LINE('',#168932,#168933); +#168932 = CARTESIAN_POINT('',(187.310963,-100.965203,1.585)); +#168933 = VECTOR('',#168934,1.); +#168934 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#168935 = PLANE('',#168936); +#168936 = AXIS2_PLACEMENT_3D('',#168937,#168938,#168939); +#168937 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168938 = DIRECTION('',(0.,0.,1.)); +#168939 = DIRECTION('',(1.,0.,-0.)); +#168940 = SHELL_BASED_SURFACE_MODEL('',(#168941)); +#168941 = OPEN_SHELL('',(#168942)); +#168942 = ADVANCED_FACE('',(#168943,#169061),#169129,.T.); +#168943 = FACE_BOUND('',#168944,.F.); +#168944 = EDGE_LOOP('',(#168945,#168956,#168964,#168972,#168981,#168989, + #168998,#169006,#169014,#169023,#169031,#169039,#169047,#169055)); +#168945 = ORIENTED_EDGE('',*,*,#168946,.T.); +#168946 = EDGE_CURVE('',#168947,#168949,#168951,.T.); +#168947 = VERTEX_POINT('',#168948); +#168948 = CARTESIAN_POINT('',(187.854744,-100.715559,1.585)); +#168949 = VERTEX_POINT('',#168950); +#168950 = CARTESIAN_POINT('',(187.971412,-100.777919,1.585)); +#168951 = CIRCLE('',#168952,7.500000000001E-02); +#168952 = AXIS2_PLACEMENT_3D('',#168953,#168954,#168955); +#168953 = CARTESIAN_POINT('',(187.896412,-100.7779190655,1.585)); +#168954 = DIRECTION('',(0.,0.,-1.)); +#168955 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#168956 = ORIENTED_EDGE('',*,*,#168957,.T.); +#168957 = EDGE_CURVE('',#168949,#168958,#168960,.T.); +#168958 = VERTEX_POINT('',#168959); +#168959 = CARTESIAN_POINT('',(187.97184,-101.038915,1.585)); +#168960 = LINE('',#168961,#168962); +#168961 = CARTESIAN_POINT('',(187.971412,-100.777919,1.585)); +#168962 = VECTOR('',#168963,1.); +#168963 = DIRECTION('',(1.639869670478E-03,-0.999998655413,0.)); +#168964 = ORIENTED_EDGE('',*,*,#168965,.T.); +#168965 = EDGE_CURVE('',#168958,#168966,#168968,.T.); +#168966 = VERTEX_POINT('',#168967); +#168967 = CARTESIAN_POINT('',(188.201935,-101.038915,1.585)); +#168968 = LINE('',#168969,#168970); +#168969 = CARTESIAN_POINT('',(187.97184,-101.038915,1.585)); +#168970 = VECTOR('',#168971,1.); +#168971 = DIRECTION('',(1.,0.,0.)); +#168972 = ORIENTED_EDGE('',*,*,#168973,.T.); +#168973 = EDGE_CURVE('',#168966,#168974,#168976,.T.); +#168974 = VERTEX_POINT('',#168975); +#168975 = CARTESIAN_POINT('',(188.446161,-101.287096,1.585)); +#168976 = CIRCLE('',#168977,0.348625649748); +#168977 = AXIS2_PLACEMENT_3D('',#168978,#168979,#168980); +#168978 = CARTESIAN_POINT('',(188.10876304586,-101.3748596838,1.585)); +#168979 = DIRECTION('',(0.,0.,-1.)); +#168980 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#168981 = ORIENTED_EDGE('',*,*,#168982,.T.); +#168982 = EDGE_CURVE('',#168974,#168983,#168985,.T.); +#168983 = VERTEX_POINT('',#168984); +#168984 = CARTESIAN_POINT('',(188.444939,-101.607252,1.585)); +#168985 = LINE('',#168986,#168987); +#168986 = CARTESIAN_POINT('',(188.446161,-101.287096,1.585)); +#168987 = VECTOR('',#168988,1.); +#168988 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#168989 = ORIENTED_EDGE('',*,*,#168990,.T.); +#168990 = EDGE_CURVE('',#168983,#168991,#168993,.T.); +#168991 = VERTEX_POINT('',#168992); +#168992 = CARTESIAN_POINT('',(188.196758,-101.851478,1.585)); +#168993 = CIRCLE('',#168994,0.348635327447); +#168994 = AXIS2_PLACEMENT_3D('',#168995,#168996,#168997); +#168995 = CARTESIAN_POINT('',(188.10898648129,-101.5140720841,1.585)); +#168996 = DIRECTION('',(0.,0.,-1.)); +#168997 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#168998 = ORIENTED_EDGE('',*,*,#168999,.T.); +#168999 = EDGE_CURVE('',#168991,#169000,#169002,.T.); +#169000 = VERTEX_POINT('',#169001); +#169001 = CARTESIAN_POINT('',(187.97184,-101.850256,1.585)); +#169002 = LINE('',#169003,#169004); +#169003 = CARTESIAN_POINT('',(188.196758,-101.851478,1.585)); +#169004 = VECTOR('',#169005,1.); +#169005 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#169006 = ORIENTED_EDGE('',*,*,#169007,.T.); +#169007 = EDGE_CURVE('',#169000,#169008,#169010,.T.); +#169008 = VERTEX_POINT('',#169009); +#169009 = CARTESIAN_POINT('',(187.941608,-101.83675,1.585)); +#169010 = LINE('',#169011,#169012); +#169011 = CARTESIAN_POINT('',(187.97184,-101.850256,1.585)); +#169012 = VECTOR('',#169013,1.); +#169013 = DIRECTION('',(-0.913030248774,0.407891854325,0.)); +#169014 = ORIENTED_EDGE('',*,*,#169015,.T.); +#169015 = EDGE_CURVE('',#169008,#169016,#169018,.T.); +#169016 = VERTEX_POINT('',#169017); +#169017 = CARTESIAN_POINT('',(187.854744,-101.840279,1.585)); +#169018 = CIRCLE('',#169019,7.226397606084E-02); +#169019 = AXIS2_PLACEMENT_3D('',#169020,#169021,#169022); +#169020 = CARTESIAN_POINT('',(187.89583259538,-101.7808331459,1.585)); +#169021 = DIRECTION('',(-0.,0.,-1.)); +#169022 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#169023 = ORIENTED_EDGE('',*,*,#169024,.T.); +#169024 = EDGE_CURVE('',#169016,#169025,#169027,.T.); +#169025 = VERTEX_POINT('',#169026); +#169026 = CARTESIAN_POINT('',(187.834052,-101.819587,1.585)); +#169027 = LINE('',#169028,#169029); +#169028 = CARTESIAN_POINT('',(187.854744,-101.840279,1.585)); +#169029 = VECTOR('',#169030,1.); +#169030 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#169031 = ORIENTED_EDGE('',*,*,#169032,.T.); +#169032 = EDGE_CURVE('',#169025,#169033,#169035,.T.); +#169033 = VERTEX_POINT('',#169034); +#169034 = CARTESIAN_POINT('',(187.821412,-101.777919,1.585)); +#169035 = LINE('',#169036,#169037); +#169036 = CARTESIAN_POINT('',(187.834052,-101.819587,1.585)); +#169037 = VECTOR('',#169038,1.); +#169038 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#169039 = ORIENTED_EDGE('',*,*,#169040,.T.); +#169040 = EDGE_CURVE('',#169033,#169041,#169043,.T.); +#169041 = VERTEX_POINT('',#169042); +#169042 = CARTESIAN_POINT('',(187.822853,-100.763287,1.585)); +#169043 = LINE('',#169044,#169045); +#169044 = CARTESIAN_POINT('',(187.821412,-101.777919,1.585)); +#169045 = VECTOR('',#169046,1.); +#169046 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#169047 = ORIENTED_EDGE('',*,*,#169048,.T.); +#169048 = EDGE_CURVE('',#169041,#169049,#169051,.T.); +#169049 = VERTEX_POINT('',#169050); +#169050 = CARTESIAN_POINT('',(187.834052,-100.736251,1.585)); +#169051 = LINE('',#169052,#169053); +#169052 = CARTESIAN_POINT('',(187.822853,-100.763287,1.585)); +#169053 = VECTOR('',#169054,1.); +#169054 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169055 = ORIENTED_EDGE('',*,*,#169056,.T.); +#169056 = EDGE_CURVE('',#169049,#168947,#169057,.T.); +#169057 = LINE('',#169058,#169059); +#169058 = CARTESIAN_POINT('',(187.834052,-100.736251,1.585)); +#169059 = VECTOR('',#169060,1.); +#169060 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#169061 = FACE_BOUND('',#169062,.F.); +#169062 = EDGE_LOOP('',(#169063,#169074,#169082,#169090,#169098,#169106, + #169114,#169123)); +#169063 = ORIENTED_EDGE('',*,*,#169064,.T.); +#169064 = EDGE_CURVE('',#169065,#169067,#169069,.T.); +#169065 = VERTEX_POINT('',#169066); +#169066 = CARTESIAN_POINT('',(188.297602,-101.319433,1.585)); +#169067 = VERTEX_POINT('',#169068); +#169068 = CARTESIAN_POINT('',(188.164421,-101.186252,1.585)); +#169069 = CIRCLE('',#169070,0.18686440374); +#169070 = AXIS2_PLACEMENT_3D('',#169071,#169072,#169073); +#169071 = CARTESIAN_POINT('',(188.116885,-101.366969,1.585)); +#169072 = DIRECTION('',(0.,0.,1.)); +#169073 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#169074 = ORIENTED_EDGE('',*,*,#169075,.T.); +#169075 = EDGE_CURVE('',#169067,#169076,#169078,.T.); +#169076 = VERTEX_POINT('',#169077); +#169077 = CARTESIAN_POINT('',(188.009355,-101.186252,1.585)); +#169078 = LINE('',#169079,#169080); +#169079 = CARTESIAN_POINT('',(188.164421,-101.186252,1.585)); +#169080 = VECTOR('',#169081,1.); +#169081 = DIRECTION('',(-1.,0.,0.)); +#169082 = ORIENTED_EDGE('',*,*,#169083,.T.); +#169083 = EDGE_CURVE('',#169076,#169084,#169086,.T.); +#169084 = VERTEX_POINT('',#169085); +#169085 = CARTESIAN_POINT('',(187.971412,-101.205223,1.585)); +#169086 = LINE('',#169087,#169088); +#169087 = CARTESIAN_POINT('',(188.009355,-101.186252,1.585)); +#169088 = VECTOR('',#169089,1.); +#169089 = DIRECTION('',(-0.894431905558,-0.447204166259,0.)); +#169090 = ORIENTED_EDGE('',*,*,#169091,.T.); +#169091 = EDGE_CURVE('',#169084,#169092,#169094,.T.); +#169092 = VERTEX_POINT('',#169093); +#169093 = CARTESIAN_POINT('',(187.971412,-101.683947,1.585)); +#169094 = LINE('',#169095,#169096); +#169095 = CARTESIAN_POINT('',(187.971412,-101.205223,1.585)); +#169096 = VECTOR('',#169097,1.); +#169097 = DIRECTION('',(0.,-1.,0.)); +#169098 = ORIENTED_EDGE('',*,*,#169099,.T.); +#169099 = EDGE_CURVE('',#169092,#169100,#169102,.T.); +#169100 = VERTEX_POINT('',#169101); +#169101 = CARTESIAN_POINT('',(188.009355,-101.702919,1.585)); +#169102 = LINE('',#169103,#169104); +#169103 = CARTESIAN_POINT('',(187.971412,-101.683947,1.585)); +#169104 = VECTOR('',#169105,1.); +#169105 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#169106 = ORIENTED_EDGE('',*,*,#169107,.T.); +#169107 = EDGE_CURVE('',#169100,#169108,#169110,.T.); +#169108 = VERTEX_POINT('',#169109); +#169109 = CARTESIAN_POINT('',(188.164421,-101.702919,1.585)); +#169110 = LINE('',#169111,#169112); +#169111 = CARTESIAN_POINT('',(188.009355,-101.702919,1.585)); +#169112 = VECTOR('',#169113,1.); +#169113 = DIRECTION('',(1.,0.,0.)); +#169114 = ORIENTED_EDGE('',*,*,#169115,.T.); +#169115 = EDGE_CURVE('',#169108,#169116,#169118,.T.); +#169116 = VERTEX_POINT('',#169117); +#169117 = CARTESIAN_POINT('',(188.297602,-101.569737,1.585)); +#169118 = CIRCLE('',#169119,0.186867760544); +#169119 = AXIS2_PLACEMENT_3D('',#169120,#169121,#169122); +#169120 = CARTESIAN_POINT('',(188.11688196928,-101.5221993262,1.585)); +#169121 = DIRECTION('',(0.,0.,1.)); +#169122 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#169123 = ORIENTED_EDGE('',*,*,#169124,.T.); +#169124 = EDGE_CURVE('',#169116,#169065,#169125,.T.); +#169125 = LINE('',#169126,#169127); +#169126 = CARTESIAN_POINT('',(188.297602,-101.569737,1.585)); +#169127 = VECTOR('',#169128,1.); +#169128 = DIRECTION('',(0.,1.,0.)); +#169129 = PLANE('',#169130); +#169130 = AXIS2_PLACEMENT_3D('',#169131,#169132,#169133); +#169131 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169132 = DIRECTION('',(0.,0.,1.)); +#169133 = DIRECTION('',(1.,0.,-0.)); +#169134 = SHELL_BASED_SURFACE_MODEL('',(#169135)); +#169135 = OPEN_SHELL('',(#169136)); +#169136 = ADVANCED_FACE('',(#169137,#169239),#169307,.T.); +#169137 = FACE_BOUND('',#169138,.F.); +#169138 = EDGE_LOOP('',(#169139,#169150,#169158,#169166,#169175,#169183, + #169192,#169200,#169208,#169217,#169225,#169233)); +#169139 = ORIENTED_EDGE('',*,*,#169140,.T.); +#169140 = EDGE_CURVE('',#169141,#169143,#169145,.T.); +#169141 = VERTEX_POINT('',#169142); +#169142 = CARTESIAN_POINT('',(101.396411,-100.618892,1.585)); +#169143 = VERTEX_POINT('',#169144); +#169144 = CARTESIAN_POINT('',(101.483275,-100.62242,1.585)); +#169145 = CIRCLE('',#169146,7.22664907968E-02); +#169146 = AXIS2_PLACEMENT_3D('',#169147,#169148,#169149); +#169147 = CARTESIAN_POINT('',(101.43750012996,-100.6783405415,1.585)); +#169148 = DIRECTION('',(0.,0.,-1.)); +#169149 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#169150 = ORIENTED_EDGE('',*,*,#169151,.T.); +#169151 = EDGE_CURVE('',#169143,#169152,#169154,.T.); +#169152 = VERTEX_POINT('',#169153); +#169153 = CARTESIAN_POINT('',(101.518685,-100.607693,1.585)); +#169154 = LINE('',#169155,#169156); +#169155 = CARTESIAN_POINT('',(101.483275,-100.62242,1.585)); +#169156 = VECTOR('',#169157,1.); +#169157 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#169158 = ORIENTED_EDGE('',*,*,#169159,.T.); +#169159 = EDGE_CURVE('',#169152,#169160,#169162,.T.); +#169160 = VERTEX_POINT('',#169161); +#169161 = CARTESIAN_POINT('',(101.738425,-100.607693,1.585)); +#169162 = LINE('',#169163,#169164); +#169163 = CARTESIAN_POINT('',(101.518685,-100.607693,1.585)); +#169164 = VECTOR('',#169165,1.); +#169165 = DIRECTION('',(1.,0.,0.)); +#169166 = ORIENTED_EDGE('',*,*,#169167,.T.); +#169167 = EDGE_CURVE('',#169160,#169168,#169170,.T.); +#169168 = VERTEX_POINT('',#169169); +#169169 = CARTESIAN_POINT('',(101.987828,-100.857096,1.585)); +#169170 = CIRCLE('',#169171,0.347870264855); +#169171 = AXIS2_PLACEMENT_3D('',#169172,#169173,#169174); +#169172 = CARTESIAN_POINT('',(101.65109726502,-100.9444237349,1.585)); +#169173 = DIRECTION('',(0.,0.,-1.)); +#169174 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#169175 = ORIENTED_EDGE('',*,*,#169176,.T.); +#169176 = EDGE_CURVE('',#169168,#169177,#169179,.T.); +#169177 = VERTEX_POINT('',#169178); +#169178 = CARTESIAN_POINT('',(101.986606,-101.177252,1.585)); +#169179 = LINE('',#169180,#169181); +#169180 = CARTESIAN_POINT('',(101.987828,-100.857096,1.585)); +#169181 = VECTOR('',#169182,1.); +#169182 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#169183 = ORIENTED_EDGE('',*,*,#169184,.T.); +#169184 = EDGE_CURVE('',#169177,#169185,#169187,.T.); +#169185 = VERTEX_POINT('',#169186); +#169186 = CARTESIAN_POINT('',(101.738425,-101.421478,1.585)); +#169187 = CIRCLE('',#169188,0.348635327447); +#169188 = AXIS2_PLACEMENT_3D('',#169189,#169190,#169191); +#169189 = CARTESIAN_POINT('',(101.65065348129,-101.0840720841,1.585)); +#169190 = DIRECTION('',(0.,0.,-1.)); +#169191 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#169192 = ORIENTED_EDGE('',*,*,#169193,.T.); +#169193 = EDGE_CURVE('',#169185,#169194,#169196,.T.); +#169194 = VERTEX_POINT('',#169195); +#169195 = CARTESIAN_POINT('',(101.513079,-101.420092,1.585)); +#169196 = LINE('',#169197,#169198); +#169197 = CARTESIAN_POINT('',(101.738425,-101.421478,1.585)); +#169198 = VECTOR('',#169199,1.); +#169199 = DIRECTION('',(-0.999981085954,6.150425501802E-03,0.)); +#169200 = ORIENTED_EDGE('',*,*,#169201,.T.); +#169201 = EDGE_CURVE('',#169194,#169202,#169204,.T.); +#169202 = VERTEX_POINT('',#169203); +#169203 = CARTESIAN_POINT('',(101.511638,-101.695884,1.585)); +#169204 = LINE('',#169205,#169206); +#169205 = CARTESIAN_POINT('',(101.513079,-101.420092,1.585)); +#169206 = VECTOR('',#169207,1.); +#169207 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#169208 = ORIENTED_EDGE('',*,*,#169209,.T.); +#169209 = EDGE_CURVE('',#169202,#169210,#169212,.T.); +#169210 = VERTEX_POINT('',#169211); +#169211 = CARTESIAN_POINT('',(101.363079,-101.681252,1.585)); +#169212 = CIRCLE('',#169213,7.500006711464E-02); +#169213 = AXIS2_PLACEMENT_3D('',#169214,#169215,#169216); +#169214 = CARTESIAN_POINT('',(101.43807906711,-101.6812520671,1.585)); +#169215 = DIRECTION('',(-0.,0.,-1.)); +#169216 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#169217 = ORIENTED_EDGE('',*,*,#169218,.T.); +#169218 = EDGE_CURVE('',#169210,#169219,#169221,.T.); +#169219 = VERTEX_POINT('',#169220); +#169220 = CARTESIAN_POINT('',(101.36452,-100.66662,1.585)); +#169221 = LINE('',#169222,#169223); +#169222 = CARTESIAN_POINT('',(101.363079,-101.681252,1.585)); +#169223 = VECTOR('',#169224,1.); +#169224 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#169225 = ORIENTED_EDGE('',*,*,#169226,.T.); +#169226 = EDGE_CURVE('',#169219,#169227,#169229,.T.); +#169227 = VERTEX_POINT('',#169228); +#169228 = CARTESIAN_POINT('',(101.375719,-100.639584,1.585)); +#169229 = LINE('',#169230,#169231); +#169230 = CARTESIAN_POINT('',(101.36452,-100.66662,1.585)); +#169231 = VECTOR('',#169232,1.); +#169232 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169233 = ORIENTED_EDGE('',*,*,#169234,.T.); +#169234 = EDGE_CURVE('',#169227,#169141,#169235,.T.); +#169235 = LINE('',#169236,#169237); +#169236 = CARTESIAN_POINT('',(101.375719,-100.639584,1.585)); +#169237 = VECTOR('',#169238,1.); +#169238 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#169239 = FACE_BOUND('',#169240,.F.); +#169240 = EDGE_LOOP('',(#169241,#169252,#169260,#169268,#169276,#169284, + #169292,#169301)); +#169241 = ORIENTED_EDGE('',*,*,#169242,.T.); +#169242 = EDGE_CURVE('',#169243,#169245,#169247,.T.); +#169243 = VERTEX_POINT('',#169244); +#169244 = CARTESIAN_POINT('',(101.839269,-100.889433,1.585)); +#169245 = VERTEX_POINT('',#169246); +#169246 = CARTESIAN_POINT('',(101.706088,-100.756252,1.585)); +#169247 = CIRCLE('',#169248,0.18686440374); +#169248 = AXIS2_PLACEMENT_3D('',#169249,#169250,#169251); +#169249 = CARTESIAN_POINT('',(101.658552,-100.936969,1.585)); +#169250 = DIRECTION('',(0.,0.,1.)); +#169251 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#169252 = ORIENTED_EDGE('',*,*,#169253,.T.); +#169253 = EDGE_CURVE('',#169245,#169254,#169256,.T.); +#169254 = VERTEX_POINT('',#169255); +#169255 = CARTESIAN_POINT('',(101.551022,-100.756252,1.585)); +#169256 = LINE('',#169257,#169258); +#169257 = CARTESIAN_POINT('',(101.706088,-100.756252,1.585)); +#169258 = VECTOR('',#169259,1.); +#169259 = DIRECTION('',(-1.,0.,0.)); +#169260 = ORIENTED_EDGE('',*,*,#169261,.T.); +#169261 = EDGE_CURVE('',#169254,#169262,#169264,.T.); +#169262 = VERTEX_POINT('',#169263); +#169263 = CARTESIAN_POINT('',(101.513079,-100.775223,1.585)); +#169264 = LINE('',#169265,#169266); +#169265 = CARTESIAN_POINT('',(101.551022,-100.756252,1.585)); +#169266 = VECTOR('',#169267,1.); +#169267 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#169268 = ORIENTED_EDGE('',*,*,#169269,.T.); +#169269 = EDGE_CURVE('',#169262,#169270,#169272,.T.); +#169270 = VERTEX_POINT('',#169271); +#169271 = CARTESIAN_POINT('',(101.513079,-101.253947,1.585)); +#169272 = LINE('',#169273,#169274); +#169273 = CARTESIAN_POINT('',(101.513079,-100.775223,1.585)); +#169274 = VECTOR('',#169275,1.); +#169275 = DIRECTION('',(0.,-1.,0.)); +#169276 = ORIENTED_EDGE('',*,*,#169277,.T.); +#169277 = EDGE_CURVE('',#169270,#169278,#169280,.T.); +#169278 = VERTEX_POINT('',#169279); +#169279 = CARTESIAN_POINT('',(101.551022,-101.272919,1.585)); +#169280 = LINE('',#169281,#169282); +#169281 = CARTESIAN_POINT('',(101.513079,-101.253947,1.585)); +#169282 = VECTOR('',#169283,1.); +#169283 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#169284 = ORIENTED_EDGE('',*,*,#169285,.T.); +#169285 = EDGE_CURVE('',#169278,#169286,#169288,.T.); +#169286 = VERTEX_POINT('',#169287); +#169287 = CARTESIAN_POINT('',(101.706088,-101.272919,1.585)); +#169288 = LINE('',#169289,#169290); +#169289 = CARTESIAN_POINT('',(101.551022,-101.272919,1.585)); +#169290 = VECTOR('',#169291,1.); +#169291 = DIRECTION('',(1.,0.,0.)); +#169292 = ORIENTED_EDGE('',*,*,#169293,.T.); +#169293 = EDGE_CURVE('',#169286,#169294,#169296,.T.); +#169294 = VERTEX_POINT('',#169295); +#169295 = CARTESIAN_POINT('',(101.839269,-101.139737,1.585)); +#169296 = CIRCLE('',#169297,0.186867760544); +#169297 = AXIS2_PLACEMENT_3D('',#169298,#169299,#169300); +#169298 = CARTESIAN_POINT('',(101.65854896928,-101.0921993262,1.585)); +#169299 = DIRECTION('',(0.,0.,1.)); +#169300 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#169301 = ORIENTED_EDGE('',*,*,#169302,.T.); +#169302 = EDGE_CURVE('',#169294,#169243,#169303,.T.); +#169303 = LINE('',#169304,#169305); +#169304 = CARTESIAN_POINT('',(101.839269,-101.139737,1.585)); +#169305 = VECTOR('',#169306,1.); +#169306 = DIRECTION('',(0.,1.,0.)); +#169307 = PLANE('',#169308); +#169308 = AXIS2_PLACEMENT_3D('',#169309,#169310,#169311); +#169309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169310 = DIRECTION('',(0.,0.,1.)); +#169311 = DIRECTION('',(1.,0.,-0.)); +#169312 = SHELL_BASED_SURFACE_MODEL('',(#169313)); +#169313 = OPEN_SHELL('',(#169314)); +#169314 = ADVANCED_FACE('',(#169315),#169489,.T.); +#169315 = FACE_BOUND('',#169316,.F.); +#169316 = EDGE_LOOP('',(#169317,#169328,#169336,#169344,#169353,#169361, + #169369,#169377,#169385,#169393,#169402,#169410,#169418,#169426, + #169434,#169442,#169450,#169459,#169467,#169475,#169483)); +#169317 = ORIENTED_EDGE('',*,*,#169318,.T.); +#169318 = EDGE_CURVE('',#169319,#169321,#169323,.T.); +#169319 = VERTEX_POINT('',#169320); +#169320 = CARTESIAN_POINT('',(96.872601,-100.285559,1.585)); +#169321 = VERTEX_POINT('',#169322); +#169322 = CARTESIAN_POINT('',(96.989269,-100.347919,1.585)); +#169323 = CIRCLE('',#169324,7.500000000002E-02); +#169324 = AXIS2_PLACEMENT_3D('',#169325,#169326,#169327); +#169325 = CARTESIAN_POINT('',(96.914269,-100.3479190655,1.585)); +#169326 = DIRECTION('',(0.,0.,-1.)); +#169327 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#169328 = ORIENTED_EDGE('',*,*,#169329,.T.); +#169329 = EDGE_CURVE('',#169321,#169330,#169332,.T.); +#169330 = VERTEX_POINT('',#169331); +#169331 = CARTESIAN_POINT('',(96.989269,-100.606252,1.585)); +#169332 = LINE('',#169333,#169334); +#169333 = CARTESIAN_POINT('',(96.989269,-100.347919,1.585)); +#169334 = VECTOR('',#169335,1.); +#169335 = DIRECTION('',(0.,-1.,0.)); +#169336 = ORIENTED_EDGE('',*,*,#169337,.T.); +#169337 = EDGE_CURVE('',#169330,#169338,#169340,.T.); +#169338 = VERTEX_POINT('',#169339); +#169339 = CARTESIAN_POINT('',(97.166996,-100.607693,1.585)); +#169340 = LINE('',#169341,#169342); +#169341 = CARTESIAN_POINT('',(96.989269,-100.606252,1.585)); +#169342 = VECTOR('',#169343,1.); +#169343 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#169344 = ORIENTED_EDGE('',*,*,#169345,.T.); +#169345 = EDGE_CURVE('',#169338,#169346,#169348,.T.); +#169346 = VERTEX_POINT('',#169347); +#169347 = CARTESIAN_POINT('',(97.152364,-100.756252,1.585)); +#169348 = CIRCLE('',#169349,7.500006711463E-02); +#169349 = AXIS2_PLACEMENT_3D('',#169350,#169351,#169352); +#169350 = CARTESIAN_POINT('',(97.152364067115,-100.6812519328,1.585)); +#169351 = DIRECTION('',(0.,0.,-1.)); +#169352 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169353 = ORIENTED_EDGE('',*,*,#169354,.T.); +#169354 = EDGE_CURVE('',#169346,#169355,#169357,.T.); +#169355 = VERTEX_POINT('',#169356); +#169356 = CARTESIAN_POINT('',(96.989269,-100.756252,1.585)); +#169357 = LINE('',#169358,#169359); +#169358 = CARTESIAN_POINT('',(97.152364,-100.756252,1.585)); +#169359 = VECTOR('',#169360,1.); +#169360 = DIRECTION('',(-1.,0.,0.)); +#169361 = ORIENTED_EDGE('',*,*,#169362,.T.); +#169362 = EDGE_CURVE('',#169355,#169363,#169365,.T.); +#169363 = VERTEX_POINT('',#169364); +#169364 = CARTESIAN_POINT('',(96.989269,-101.187356,1.585)); +#169365 = LINE('',#169366,#169367); +#169366 = CARTESIAN_POINT('',(96.989269,-100.756252,1.585)); +#169367 = VECTOR('',#169368,1.); +#169368 = DIRECTION('',(0.,-1.,0.)); +#169369 = ORIENTED_EDGE('',*,*,#169370,.T.); +#169370 = EDGE_CURVE('',#169363,#169371,#169373,.T.); +#169371 = VERTEX_POINT('',#169372); +#169372 = CARTESIAN_POINT('',(97.017789,-101.244398,1.585)); +#169373 = LINE('',#169374,#169375); +#169374 = CARTESIAN_POINT('',(96.989269,-101.187356,1.585)); +#169375 = VECTOR('',#169376,1.); +#169376 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#169377 = ORIENTED_EDGE('',*,*,#169378,.T.); +#169378 = EDGE_CURVE('',#169371,#169379,#169381,.T.); +#169379 = VERTEX_POINT('',#169380); +#169380 = CARTESIAN_POINT('',(97.074831,-101.272919,1.585)); +#169381 = LINE('',#169382,#169383); +#169382 = CARTESIAN_POINT('',(97.017789,-101.244398,1.585)); +#169383 = VECTOR('',#169384,1.); +#169384 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#169385 = ORIENTED_EDGE('',*,*,#169386,.T.); +#169386 = EDGE_CURVE('',#169379,#169387,#169389,.T.); +#169387 = VERTEX_POINT('',#169388); +#169388 = CARTESIAN_POINT('',(97.166996,-101.27436,1.585)); +#169389 = LINE('',#169390,#169391); +#169390 = CARTESIAN_POINT('',(97.074831,-101.272919,1.585)); +#169391 = VECTOR('',#169392,1.); +#169392 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#169393 = ORIENTED_EDGE('',*,*,#169394,.T.); +#169394 = EDGE_CURVE('',#169387,#169395,#169397,.T.); +#169395 = VERTEX_POINT('',#169396); +#169396 = CARTESIAN_POINT('',(97.152364,-101.422919,1.585)); +#169397 = CIRCLE('',#169398,7.500006711464E-02); +#169398 = AXIS2_PLACEMENT_3D('',#169399,#169400,#169401); +#169399 = CARTESIAN_POINT('',(97.152364067115,-101.3479189328,1.585)); +#169400 = DIRECTION('',(0.,0.,-1.)); +#169401 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169402 = ORIENTED_EDGE('',*,*,#169403,.T.); +#169403 = EDGE_CURVE('',#169395,#169404,#169406,.T.); +#169404 = VERTEX_POINT('',#169405); +#169405 = CARTESIAN_POINT('',(97.037316,-101.420256,1.585)); +#169406 = LINE('',#169407,#169408); +#169407 = CARTESIAN_POINT('',(97.152364,-101.422919,1.585)); +#169408 = VECTOR('',#169409,1.); +#169409 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#169410 = ORIENTED_EDGE('',*,*,#169411,.T.); +#169411 = EDGE_CURVE('',#169404,#169412,#169414,.T.); +#169412 = VERTEX_POINT('',#169413); +#169413 = CARTESIAN_POINT('',(96.915904,-101.35955,1.585)); +#169414 = LINE('',#169415,#169416); +#169415 = CARTESIAN_POINT('',(97.037316,-101.420256,1.585)); +#169416 = VECTOR('',#169417,1.); +#169417 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#169418 = ORIENTED_EDGE('',*,*,#169419,.T.); +#169419 = EDGE_CURVE('',#169412,#169420,#169422,.T.); +#169420 = VERTEX_POINT('',#169421); +#169421 = CARTESIAN_POINT('',(96.894806,-101.333841,1.585)); +#169422 = LINE('',#169423,#169424); +#169423 = CARTESIAN_POINT('',(96.915904,-101.35955,1.585)); +#169424 = VECTOR('',#169425,1.); +#169425 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#169426 = ORIENTED_EDGE('',*,*,#169427,.T.); +#169427 = EDGE_CURVE('',#169420,#169428,#169430,.T.); +#169428 = VERTEX_POINT('',#169429); +#169429 = CARTESIAN_POINT('',(96.84071,-101.219693,1.585)); +#169430 = LINE('',#169431,#169432); +#169431 = CARTESIAN_POINT('',(96.894806,-101.333841,1.585)); +#169432 = VECTOR('',#169433,1.); +#169433 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#169434 = ORIENTED_EDGE('',*,*,#169435,.T.); +#169435 = EDGE_CURVE('',#169428,#169436,#169438,.T.); +#169436 = VERTEX_POINT('',#169437); +#169437 = CARTESIAN_POINT('',(96.839269,-100.756252,1.585)); +#169438 = LINE('',#169439,#169440); +#169439 = CARTESIAN_POINT('',(96.84071,-101.219693,1.585)); +#169440 = VECTOR('',#169441,1.); +#169441 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#169442 = ORIENTED_EDGE('',*,*,#169443,.T.); +#169443 = EDGE_CURVE('',#169436,#169444,#169446,.T.); +#169444 = VERTEX_POINT('',#169445); +#169445 = CARTESIAN_POINT('',(96.75678,-100.754811,1.585)); +#169446 = LINE('',#169447,#169448); +#169447 = CARTESIAN_POINT('',(96.839269,-100.756252,1.585)); +#169448 = VECTOR('',#169449,1.); +#169449 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#169450 = ORIENTED_EDGE('',*,*,#169451,.T.); +#169451 = EDGE_CURVE('',#169444,#169452,#169454,.T.); +#169452 = VERTEX_POINT('',#169453); +#169453 = CARTESIAN_POINT('',(96.771412,-100.606252,1.585)); +#169454 = CIRCLE('',#169455,7.500006711464E-02); +#169455 = AXIS2_PLACEMENT_3D('',#169456,#169457,#169458); +#169456 = CARTESIAN_POINT('',(96.771411932885,-100.6812520671,1.585)); +#169457 = DIRECTION('',(0.,0.,-1.)); +#169458 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#169459 = ORIENTED_EDGE('',*,*,#169460,.T.); +#169460 = EDGE_CURVE('',#169452,#169461,#169463,.T.); +#169461 = VERTEX_POINT('',#169462); +#169462 = CARTESIAN_POINT('',(96.839269,-100.606252,1.585)); +#169463 = LINE('',#169464,#169465); +#169464 = CARTESIAN_POINT('',(96.771412,-100.606252,1.585)); +#169465 = VECTOR('',#169466,1.); +#169466 = DIRECTION('',(1.,0.,0.)); +#169467 = ORIENTED_EDGE('',*,*,#169468,.T.); +#169468 = EDGE_CURVE('',#169461,#169469,#169471,.T.); +#169469 = VERTEX_POINT('',#169470); +#169470 = CARTESIAN_POINT('',(96.84071,-100.333287,1.585)); +#169471 = LINE('',#169472,#169473); +#169472 = CARTESIAN_POINT('',(96.839269,-100.606252,1.585)); +#169473 = VECTOR('',#169474,1.); +#169474 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#169475 = ORIENTED_EDGE('',*,*,#169476,.T.); +#169476 = EDGE_CURVE('',#169469,#169477,#169479,.T.); +#169477 = VERTEX_POINT('',#169478); +#169478 = CARTESIAN_POINT('',(96.851909,-100.306251,1.585)); +#169479 = LINE('',#169480,#169481); +#169480 = CARTESIAN_POINT('',(96.84071,-100.333287,1.585)); +#169481 = VECTOR('',#169482,1.); +#169482 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169483 = ORIENTED_EDGE('',*,*,#169484,.T.); +#169484 = EDGE_CURVE('',#169477,#169319,#169485,.T.); +#169485 = LINE('',#169486,#169487); +#169486 = CARTESIAN_POINT('',(96.851909,-100.306251,1.585)); +#169487 = VECTOR('',#169488,1.); +#169488 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#169489 = PLANE('',#169490); +#169490 = AXIS2_PLACEMENT_3D('',#169491,#169492,#169493); +#169491 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169492 = DIRECTION('',(0.,0.,1.)); +#169493 = DIRECTION('',(1.,0.,-0.)); +#169494 = SHELL_BASED_SURFACE_MODEL('',(#169495)); +#169495 = OPEN_SHELL('',(#169496)); +#169496 = ADVANCED_FACE('',(#169497),#169671,.T.); +#169497 = FACE_BOUND('',#169498,.F.); +#169498 = EDGE_LOOP('',(#169499,#169510,#169518,#169526,#169535,#169543, + #169551,#169559,#169567,#169575,#169584,#169592,#169600,#169608, + #169616,#169624,#169632,#169641,#169649,#169657,#169665)); +#169499 = ORIENTED_EDGE('',*,*,#169500,.T.); +#169500 = EDGE_CURVE('',#169501,#169503,#169505,.T.); +#169501 = VERTEX_POINT('',#169502); +#169502 = CARTESIAN_POINT('',(100.824982,-100.285559,1.585)); +#169503 = VERTEX_POINT('',#169504); +#169504 = CARTESIAN_POINT('',(100.94165,-100.347919,1.585)); +#169505 = CIRCLE('',#169506,7.500000000003E-02); +#169506 = AXIS2_PLACEMENT_3D('',#169507,#169508,#169509); +#169507 = CARTESIAN_POINT('',(100.86665,-100.3479190655,1.585)); +#169508 = DIRECTION('',(0.,0.,-1.)); +#169509 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#169510 = ORIENTED_EDGE('',*,*,#169511,.T.); +#169511 = EDGE_CURVE('',#169503,#169512,#169514,.T.); +#169512 = VERTEX_POINT('',#169513); +#169513 = CARTESIAN_POINT('',(100.94165,-100.606252,1.585)); +#169514 = LINE('',#169515,#169516); +#169515 = CARTESIAN_POINT('',(100.94165,-100.347919,1.585)); +#169516 = VECTOR('',#169517,1.); +#169517 = DIRECTION('',(0.,-1.,0.)); +#169518 = ORIENTED_EDGE('',*,*,#169519,.T.); +#169519 = EDGE_CURVE('',#169512,#169520,#169522,.T.); +#169520 = VERTEX_POINT('',#169521); +#169521 = CARTESIAN_POINT('',(101.119377,-100.607693,1.585)); +#169522 = LINE('',#169523,#169524); +#169523 = CARTESIAN_POINT('',(100.94165,-100.606252,1.585)); +#169524 = VECTOR('',#169525,1.); +#169525 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#169526 = ORIENTED_EDGE('',*,*,#169527,.T.); +#169527 = EDGE_CURVE('',#169520,#169528,#169530,.T.); +#169528 = VERTEX_POINT('',#169529); +#169529 = CARTESIAN_POINT('',(101.104745,-100.756252,1.585)); +#169530 = CIRCLE('',#169531,7.500006711463E-02); +#169531 = AXIS2_PLACEMENT_3D('',#169532,#169533,#169534); +#169532 = CARTESIAN_POINT('',(101.10474506711,-100.6812519328,1.585)); +#169533 = DIRECTION('',(0.,0.,-1.)); +#169534 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169535 = ORIENTED_EDGE('',*,*,#169536,.T.); +#169536 = EDGE_CURVE('',#169528,#169537,#169539,.T.); +#169537 = VERTEX_POINT('',#169538); +#169538 = CARTESIAN_POINT('',(100.94165,-100.756252,1.585)); +#169539 = LINE('',#169540,#169541); +#169540 = CARTESIAN_POINT('',(101.104745,-100.756252,1.585)); +#169541 = VECTOR('',#169542,1.); +#169542 = DIRECTION('',(-1.,0.,0.)); +#169543 = ORIENTED_EDGE('',*,*,#169544,.T.); +#169544 = EDGE_CURVE('',#169537,#169545,#169547,.T.); +#169545 = VERTEX_POINT('',#169546); +#169546 = CARTESIAN_POINT('',(100.94165,-101.187356,1.585)); +#169547 = LINE('',#169548,#169549); +#169548 = CARTESIAN_POINT('',(100.94165,-100.756252,1.585)); +#169549 = VECTOR('',#169550,1.); +#169550 = DIRECTION('',(0.,-1.,0.)); +#169551 = ORIENTED_EDGE('',*,*,#169552,.T.); +#169552 = EDGE_CURVE('',#169545,#169553,#169555,.T.); +#169553 = VERTEX_POINT('',#169554); +#169554 = CARTESIAN_POINT('',(100.97017,-101.244398,1.585)); +#169555 = LINE('',#169556,#169557); +#169556 = CARTESIAN_POINT('',(100.94165,-101.187356,1.585)); +#169557 = VECTOR('',#169558,1.); +#169558 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#169559 = ORIENTED_EDGE('',*,*,#169560,.T.); +#169560 = EDGE_CURVE('',#169553,#169561,#169563,.T.); +#169561 = VERTEX_POINT('',#169562); +#169562 = CARTESIAN_POINT('',(101.027212,-101.272919,1.585)); +#169563 = LINE('',#169564,#169565); +#169564 = CARTESIAN_POINT('',(100.97017,-101.244398,1.585)); +#169565 = VECTOR('',#169566,1.); +#169566 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#169567 = ORIENTED_EDGE('',*,*,#169568,.T.); +#169568 = EDGE_CURVE('',#169561,#169569,#169571,.T.); +#169569 = VERTEX_POINT('',#169570); +#169570 = CARTESIAN_POINT('',(101.119377,-101.27436,1.585)); +#169571 = LINE('',#169572,#169573); +#169572 = CARTESIAN_POINT('',(101.027212,-101.272919,1.585)); +#169573 = VECTOR('',#169574,1.); +#169574 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#169575 = ORIENTED_EDGE('',*,*,#169576,.T.); +#169576 = EDGE_CURVE('',#169569,#169577,#169579,.T.); +#169577 = VERTEX_POINT('',#169578); +#169578 = CARTESIAN_POINT('',(101.104745,-101.422919,1.585)); +#169579 = CIRCLE('',#169580,7.500006711464E-02); +#169580 = AXIS2_PLACEMENT_3D('',#169581,#169582,#169583); +#169581 = CARTESIAN_POINT('',(101.10474506711,-101.3479189328,1.585)); +#169582 = DIRECTION('',(0.,0.,-1.)); +#169583 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169584 = ORIENTED_EDGE('',*,*,#169585,.T.); +#169585 = EDGE_CURVE('',#169577,#169586,#169588,.T.); +#169586 = VERTEX_POINT('',#169587); +#169587 = CARTESIAN_POINT('',(100.989697,-101.420256,1.585)); +#169588 = LINE('',#169589,#169590); +#169589 = CARTESIAN_POINT('',(101.104745,-101.422919,1.585)); +#169590 = VECTOR('',#169591,1.); +#169591 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#169592 = ORIENTED_EDGE('',*,*,#169593,.T.); +#169593 = EDGE_CURVE('',#169586,#169594,#169596,.T.); +#169594 = VERTEX_POINT('',#169595); +#169595 = CARTESIAN_POINT('',(100.868285,-101.35955,1.585)); +#169596 = LINE('',#169597,#169598); +#169597 = CARTESIAN_POINT('',(100.989697,-101.420256,1.585)); +#169598 = VECTOR('',#169599,1.); +#169599 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#169600 = ORIENTED_EDGE('',*,*,#169601,.T.); +#169601 = EDGE_CURVE('',#169594,#169602,#169604,.T.); +#169602 = VERTEX_POINT('',#169603); +#169603 = CARTESIAN_POINT('',(100.847187,-101.333841,1.585)); +#169604 = LINE('',#169605,#169606); +#169605 = CARTESIAN_POINT('',(100.868285,-101.35955,1.585)); +#169606 = VECTOR('',#169607,1.); +#169607 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#169608 = ORIENTED_EDGE('',*,*,#169609,.T.); +#169609 = EDGE_CURVE('',#169602,#169610,#169612,.T.); +#169610 = VERTEX_POINT('',#169611); +#169611 = CARTESIAN_POINT('',(100.793091,-101.219693,1.585)); +#169612 = LINE('',#169613,#169614); +#169613 = CARTESIAN_POINT('',(100.847187,-101.333841,1.585)); +#169614 = VECTOR('',#169615,1.); +#169615 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#169616 = ORIENTED_EDGE('',*,*,#169617,.T.); +#169617 = EDGE_CURVE('',#169610,#169618,#169620,.T.); +#169618 = VERTEX_POINT('',#169619); +#169619 = CARTESIAN_POINT('',(100.79165,-100.756252,1.585)); +#169620 = LINE('',#169621,#169622); +#169621 = CARTESIAN_POINT('',(100.793091,-101.219693,1.585)); +#169622 = VECTOR('',#169623,1.); +#169623 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#169624 = ORIENTED_EDGE('',*,*,#169625,.T.); +#169625 = EDGE_CURVE('',#169618,#169626,#169628,.T.); +#169626 = VERTEX_POINT('',#169627); +#169627 = CARTESIAN_POINT('',(100.709161,-100.754811,1.585)); +#169628 = LINE('',#169629,#169630); +#169629 = CARTESIAN_POINT('',(100.79165,-100.756252,1.585)); +#169630 = VECTOR('',#169631,1.); +#169631 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#169632 = ORIENTED_EDGE('',*,*,#169633,.T.); +#169633 = EDGE_CURVE('',#169626,#169634,#169636,.T.); +#169634 = VERTEX_POINT('',#169635); +#169635 = CARTESIAN_POINT('',(100.723793,-100.606252,1.585)); +#169636 = CIRCLE('',#169637,7.500006711464E-02); +#169637 = AXIS2_PLACEMENT_3D('',#169638,#169639,#169640); +#169638 = CARTESIAN_POINT('',(100.72379293288,-100.6812520671,1.585)); +#169639 = DIRECTION('',(0.,0.,-1.)); +#169640 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#169641 = ORIENTED_EDGE('',*,*,#169642,.T.); +#169642 = EDGE_CURVE('',#169634,#169643,#169645,.T.); +#169643 = VERTEX_POINT('',#169644); +#169644 = CARTESIAN_POINT('',(100.79165,-100.606252,1.585)); +#169645 = LINE('',#169646,#169647); +#169646 = CARTESIAN_POINT('',(100.723793,-100.606252,1.585)); +#169647 = VECTOR('',#169648,1.); +#169648 = DIRECTION('',(1.,0.,0.)); +#169649 = ORIENTED_EDGE('',*,*,#169650,.T.); +#169650 = EDGE_CURVE('',#169643,#169651,#169653,.T.); +#169651 = VERTEX_POINT('',#169652); +#169652 = CARTESIAN_POINT('',(100.793091,-100.333287,1.585)); +#169653 = LINE('',#169654,#169655); +#169654 = CARTESIAN_POINT('',(100.79165,-100.606252,1.585)); +#169655 = VECTOR('',#169656,1.); +#169656 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#169657 = ORIENTED_EDGE('',*,*,#169658,.T.); +#169658 = EDGE_CURVE('',#169651,#169659,#169661,.T.); +#169659 = VERTEX_POINT('',#169660); +#169660 = CARTESIAN_POINT('',(100.80429,-100.306251,1.585)); +#169661 = LINE('',#169662,#169663); +#169662 = CARTESIAN_POINT('',(100.793091,-100.333287,1.585)); +#169663 = VECTOR('',#169664,1.); +#169664 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169665 = ORIENTED_EDGE('',*,*,#169666,.T.); +#169666 = EDGE_CURVE('',#169659,#169501,#169667,.T.); +#169667 = LINE('',#169668,#169669); +#169668 = CARTESIAN_POINT('',(100.80429,-100.306251,1.585)); +#169669 = VECTOR('',#169670,1.); +#169670 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#169671 = PLANE('',#169672); +#169672 = AXIS2_PLACEMENT_3D('',#169673,#169674,#169675); +#169673 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169674 = DIRECTION('',(0.,0.,1.)); +#169675 = DIRECTION('',(1.,0.,-0.)); +#169676 = SHELL_BASED_SURFACE_MODEL('',(#169677)); +#169677 = OPEN_SHELL('',(#169678)); +#169678 = ADVANCED_FACE('',(#169679),#169813,.T.); +#169679 = FACE_BOUND('',#169680,.F.); +#169680 = EDGE_LOOP('',(#169681,#169691,#169699,#169708,#169716,#169724, + #169733,#169741,#169750,#169758,#169766,#169774,#169782,#169791, + #169799,#169807)); +#169681 = ORIENTED_EDGE('',*,*,#169682,.T.); +#169682 = EDGE_CURVE('',#169683,#169685,#169687,.T.); +#169683 = VERTEX_POINT('',#169684); +#169684 = CARTESIAN_POINT('',(105.789752,-100.294941,1.585)); +#169685 = VERTEX_POINT('',#169686); +#169686 = CARTESIAN_POINT('',(105.828208,-100.27436,1.585)); +#169687 = LINE('',#169688,#169689); +#169688 = CARTESIAN_POINT('',(105.789752,-100.294941,1.585)); +#169689 = VECTOR('',#169690,1.); +#169690 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#169691 = ORIENTED_EDGE('',*,*,#169692,.T.); +#169692 = EDGE_CURVE('',#169685,#169693,#169695,.T.); +#169693 = VERTEX_POINT('',#169694); +#169694 = CARTESIAN_POINT('',(105.850045,-100.27436,1.585)); +#169695 = LINE('',#169696,#169697); +#169696 = CARTESIAN_POINT('',(105.828208,-100.27436,1.585)); +#169697 = VECTOR('',#169698,1.); +#169698 = DIRECTION('',(1.,0.,0.)); +#169699 = ORIENTED_EDGE('',*,*,#169700,.T.); +#169700 = EDGE_CURVE('',#169693,#169701,#169703,.T.); +#169701 = VERTEX_POINT('',#169702); +#169702 = CARTESIAN_POINT('',(105.91784,-100.347919,1.585)); +#169703 = CIRCLE('',#169704,7.216898094229E-02); +#169704 = AXIS2_PLACEMENT_3D('',#169705,#169706,#169707); +#169705 = CARTESIAN_POINT('',(105.84568706389,-100.3463972834,1.585)); +#169706 = DIRECTION('',(0.,0.,-1.)); +#169707 = DIRECTION('',(6.038516895263E-02,0.998175150648,0.)); +#169708 = ORIENTED_EDGE('',*,*,#169709,.T.); +#169709 = EDGE_CURVE('',#169701,#169710,#169712,.T.); +#169710 = VERTEX_POINT('',#169711); +#169711 = CARTESIAN_POINT('',(105.91784,-101.272919,1.585)); +#169712 = LINE('',#169713,#169714); +#169713 = CARTESIAN_POINT('',(105.91784,-100.347919,1.585)); +#169714 = VECTOR('',#169715,1.); +#169715 = DIRECTION('',(0.,-1.,0.)); +#169716 = ORIENTED_EDGE('',*,*,#169717,.T.); +#169717 = EDGE_CURVE('',#169710,#169718,#169720,.T.); +#169718 = VERTEX_POINT('',#169719); +#169719 = CARTESIAN_POINT('',(106.143186,-101.27436,1.585)); +#169720 = LINE('',#169721,#169722); +#169721 = CARTESIAN_POINT('',(105.91784,-101.272919,1.585)); +#169722 = VECTOR('',#169723,1.); +#169723 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#169724 = ORIENTED_EDGE('',*,*,#169725,.T.); +#169725 = EDGE_CURVE('',#169718,#169726,#169728,.T.); +#169726 = VERTEX_POINT('',#169727); +#169727 = CARTESIAN_POINT('',(106.128554,-101.422919,1.585)); +#169728 = CIRCLE('',#169729,7.500006711464E-02); +#169729 = AXIS2_PLACEMENT_3D('',#169730,#169731,#169732); +#169730 = CARTESIAN_POINT('',(106.12855406711,-101.3479189328,1.585)); +#169731 = DIRECTION('',(0.,0.,-1.)); +#169732 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169733 = ORIENTED_EDGE('',*,*,#169734,.T.); +#169734 = EDGE_CURVE('',#169726,#169735,#169737,.T.); +#169735 = VERTEX_POINT('',#169736); +#169736 = CARTESIAN_POINT('',(105.542494,-101.421478,1.585)); +#169737 = LINE('',#169738,#169739); +#169738 = CARTESIAN_POINT('',(106.128554,-101.422919,1.585)); +#169739 = VECTOR('',#169740,1.); +#169740 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#169741 = ORIENTED_EDGE('',*,*,#169742,.T.); +#169742 = EDGE_CURVE('',#169735,#169743,#169745,.T.); +#169743 = VERTEX_POINT('',#169744); +#169744 = CARTESIAN_POINT('',(105.557126,-101.272919,1.585)); +#169745 = CIRCLE('',#169746,7.500006711463E-02); +#169746 = AXIS2_PLACEMENT_3D('',#169747,#169748,#169749); +#169747 = CARTESIAN_POINT('',(105.55712593288,-101.3479190671,1.585)); +#169748 = DIRECTION('',(0.,0.,-1.)); +#169749 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#169750 = ORIENTED_EDGE('',*,*,#169751,.T.); +#169751 = EDGE_CURVE('',#169743,#169752,#169754,.T.); +#169752 = VERTEX_POINT('',#169753); +#169753 = CARTESIAN_POINT('',(105.76784,-101.272919,1.585)); +#169754 = LINE('',#169755,#169756); +#169755 = CARTESIAN_POINT('',(105.557126,-101.272919,1.585)); +#169756 = VECTOR('',#169757,1.); +#169757 = DIRECTION('',(1.,0.,0.)); +#169758 = ORIENTED_EDGE('',*,*,#169759,.T.); +#169759 = EDGE_CURVE('',#169752,#169760,#169762,.T.); +#169760 = VERTEX_POINT('',#169761); +#169761 = CARTESIAN_POINT('',(105.76784,-100.576604,1.585)); +#169762 = LINE('',#169763,#169764); +#169763 = CARTESIAN_POINT('',(105.76784,-101.272919,1.585)); +#169764 = VECTOR('',#169765,1.); +#169765 = DIRECTION('',(0.,1.,0.)); +#169766 = ORIENTED_EDGE('',*,*,#169767,.T.); +#169767 = EDGE_CURVE('',#169760,#169768,#169770,.T.); +#169768 = VERTEX_POINT('',#169769); +#169769 = CARTESIAN_POINT('',(105.692204,-100.649131,1.585)); +#169770 = LINE('',#169771,#169772); +#169771 = CARTESIAN_POINT('',(105.76784,-100.576604,1.585)); +#169772 = VECTOR('',#169773,1.); +#169773 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#169774 = ORIENTED_EDGE('',*,*,#169775,.T.); +#169775 = EDGE_CURVE('',#169768,#169776,#169778,.T.); +#169776 = VERTEX_POINT('',#169777); +#169777 = CARTESIAN_POINT('',(105.576935,-100.70597,1.585)); +#169778 = LINE('',#169779,#169780); +#169779 = CARTESIAN_POINT('',(105.692204,-100.649131,1.585)); +#169780 = VECTOR('',#169781,1.); +#169781 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#169782 = ORIENTED_EDGE('',*,*,#169783,.T.); +#169783 = EDGE_CURVE('',#169776,#169784,#169786,.T.); +#169784 = VERTEX_POINT('',#169785); +#169785 = CARTESIAN_POINT('',(105.523585,-100.566551,1.585)); +#169786 = CIRCLE('',#169787,7.500005272361E-02); +#169787 = AXIS2_PLACEMENT_3D('',#169788,#169789,#169790); +#169788 = CARTESIAN_POINT('',(105.55712555676,-100.6336333297,1.585)); +#169789 = DIRECTION('',(0.,0.,-1.)); +#169790 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#169791 = ORIENTED_EDGE('',*,*,#169792,.T.); +#169792 = EDGE_CURVE('',#169784,#169793,#169795,.T.); +#169793 = VERTEX_POINT('',#169794); +#169794 = CARTESIAN_POINT('',(105.607937,-100.524375,1.585)); +#169795 = LINE('',#169796,#169797); +#169796 = CARTESIAN_POINT('',(105.523585,-100.566551,1.585)); +#169797 = VECTOR('',#169798,1.); +#169798 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#169799 = ORIENTED_EDGE('',*,*,#169800,.T.); +#169800 = EDGE_CURVE('',#169793,#169801,#169803,.T.); +#169801 = VERTEX_POINT('',#169802); +#169802 = CARTESIAN_POINT('',(105.689316,-100.442996,1.585)); +#169803 = LINE('',#169804,#169805); +#169804 = CARTESIAN_POINT('',(105.607937,-100.524375,1.585)); +#169805 = VECTOR('',#169806,1.); +#169806 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#169807 = ORIENTED_EDGE('',*,*,#169808,.T.); +#169808 = EDGE_CURVE('',#169801,#169683,#169809,.T.); +#169809 = LINE('',#169810,#169811); +#169810 = CARTESIAN_POINT('',(105.689316,-100.442996,1.585)); +#169811 = VECTOR('',#169812,1.); +#169812 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#169813 = PLANE('',#169814); +#169814 = AXIS2_PLACEMENT_3D('',#169815,#169816,#169817); +#169815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169816 = DIRECTION('',(0.,0.,1.)); +#169817 = DIRECTION('',(1.,0.,-0.)); +#169818 = SHELL_BASED_SURFACE_MODEL('',(#169819)); +#169819 = OPEN_SHELL('',(#169820)); +#169820 = ADVANCED_FACE('',(#169821),#169980,.T.); +#169821 = FACE_BOUND('',#169822,.F.); +#169822 = EDGE_LOOP('',(#169823,#169834,#169842,#169850,#169858,#169866, + #169874,#169882,#169891,#169899,#169908,#169916,#169924,#169932, + #169941,#169949,#169957,#169965,#169974)); +#169823 = ORIENTED_EDGE('',*,*,#169824,.T.); +#169824 = EDGE_CURVE('',#169825,#169827,#169829,.T.); +#169825 = VERTEX_POINT('',#169826); +#169826 = CARTESIAN_POINT('',(109.071204,-100.328456,1.585)); +#169827 = VERTEX_POINT('',#169828); +#169828 = CARTESIAN_POINT('',(109.580599,-100.337786,1.585)); +#169829 = CIRCLE('',#169830,0.450326844012); +#169830 = AXIS2_PLACEMENT_3D('',#169831,#169832,#169833); +#169831 = CARTESIAN_POINT('',(109.3191010301,-100.7044098919,1.585)); +#169832 = DIRECTION('',(0.,0.,-1.)); +#169833 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#169834 = ORIENTED_EDGE('',*,*,#169835,.T.); +#169835 = EDGE_CURVE('',#169827,#169836,#169838,.T.); +#169836 = VERTEX_POINT('',#169837); +#169837 = CARTESIAN_POINT('',(109.644052,-100.403316,1.585)); +#169838 = LINE('',#169839,#169840); +#169839 = CARTESIAN_POINT('',(109.580599,-100.337786,1.585)); +#169840 = VECTOR('',#169841,1.); +#169841 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#169842 = ORIENTED_EDGE('',*,*,#169843,.T.); +#169843 = EDGE_CURVE('',#169836,#169844,#169846,.T.); +#169844 = VERTEX_POINT('',#169845); +#169845 = CARTESIAN_POINT('',(109.702113,-100.523763,1.585)); +#169846 = LINE('',#169847,#169848); +#169847 = CARTESIAN_POINT('',(109.644052,-100.403316,1.585)); +#169848 = VECTOR('',#169849,1.); +#169849 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#169850 = ORIENTED_EDGE('',*,*,#169851,.T.); +#169851 = EDGE_CURVE('',#169844,#169852,#169854,.T.); +#169852 = VERTEX_POINT('',#169853); +#169853 = CARTESIAN_POINT('',(109.701354,-100.650095,1.585)); +#169854 = LINE('',#169855,#169856); +#169855 = CARTESIAN_POINT('',(109.702113,-100.523763,1.585)); +#169856 = VECTOR('',#169857,1.); +#169857 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#169858 = ORIENTED_EDGE('',*,*,#169859,.T.); +#169859 = EDGE_CURVE('',#169852,#169860,#169862,.T.); +#169860 = VERTEX_POINT('',#169861); +#169861 = CARTESIAN_POINT('',(109.643296,-100.818158,1.585)); +#169862 = LINE('',#169863,#169864); +#169863 = CARTESIAN_POINT('',(109.701354,-100.650095,1.585)); +#169864 = VECTOR('',#169865,1.); +#169865 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#169866 = ORIENTED_EDGE('',*,*,#169867,.T.); +#169867 = EDGE_CURVE('',#169860,#169868,#169870,.T.); +#169868 = VERTEX_POINT('',#169869); +#169869 = CARTESIAN_POINT('',(109.190573,-101.272919,1.585)); +#169870 = LINE('',#169871,#169872); +#169871 = CARTESIAN_POINT('',(109.643296,-100.818158,1.585)); +#169872 = VECTOR('',#169873,1.); +#169873 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#169874 = ORIENTED_EDGE('',*,*,#169875,.T.); +#169875 = EDGE_CURVE('',#169868,#169876,#169878,.T.); +#169876 = VERTEX_POINT('',#169877); +#169877 = CARTESIAN_POINT('',(109.643186,-101.27436,1.585)); +#169878 = LINE('',#169879,#169880); +#169879 = CARTESIAN_POINT('',(109.190573,-101.272919,1.585)); +#169880 = VECTOR('',#169881,1.); +#169881 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#169882 = ORIENTED_EDGE('',*,*,#169883,.T.); +#169883 = EDGE_CURVE('',#169876,#169884,#169886,.T.); +#169884 = VERTEX_POINT('',#169885); +#169885 = CARTESIAN_POINT('',(109.628554,-101.422919,1.585)); +#169886 = CIRCLE('',#169887,7.500006711464E-02); +#169887 = AXIS2_PLACEMENT_3D('',#169888,#169889,#169890); +#169888 = CARTESIAN_POINT('',(109.62855406711,-101.3479189328,1.585)); +#169889 = DIRECTION('',(0.,0.,-1.)); +#169890 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169891 = ORIENTED_EDGE('',*,*,#169892,.T.); +#169892 = EDGE_CURVE('',#169884,#169893,#169895,.T.); +#169893 = VERTEX_POINT('',#169894); +#169894 = CARTESIAN_POINT('',(108.994875,-101.421478,1.585)); +#169895 = LINE('',#169896,#169897); +#169896 = CARTESIAN_POINT('',(109.628554,-101.422919,1.585)); +#169897 = VECTOR('',#169898,1.); +#169898 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#169899 = ORIENTED_EDGE('',*,*,#169900,.T.); +#169900 = EDGE_CURVE('',#169893,#169901,#169903,.T.); +#169901 = VERTEX_POINT('',#169902); +#169902 = CARTESIAN_POINT('',(108.956474,-101.294886,1.585)); +#169903 = CIRCLE('',#169904,7.500021013109E-02); +#169904 = AXIS2_PLACEMENT_3D('',#169905,#169906,#169907); +#169905 = CARTESIAN_POINT('',(109.0095073167,-101.3479189976,1.585)); +#169906 = DIRECTION('',(0.,0.,-1.)); +#169907 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#169908 = ORIENTED_EDGE('',*,*,#169909,.T.); +#169909 = EDGE_CURVE('',#169901,#169910,#169912,.T.); +#169910 = VERTEX_POINT('',#169911); +#169911 = CARTESIAN_POINT('',(109.515382,-100.735976,1.585)); +#169912 = LINE('',#169913,#169914); +#169913 = CARTESIAN_POINT('',(108.956474,-101.294886,1.585)); +#169914 = VECTOR('',#169915,1.); +#169915 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#169916 = ORIENTED_EDGE('',*,*,#169917,.T.); +#169917 = EDGE_CURVE('',#169910,#169918,#169920,.T.); +#169918 = VERTEX_POINT('',#169919); +#169919 = CARTESIAN_POINT('',(109.553554,-100.621463,1.585)); +#169920 = LINE('',#169921,#169922); +#169921 = CARTESIAN_POINT('',(109.515382,-100.735976,1.585)); +#169922 = VECTOR('',#169923,1.); +#169923 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#169924 = ORIENTED_EDGE('',*,*,#169925,.T.); +#169925 = EDGE_CURVE('',#169918,#169926,#169928,.T.); +#169926 = VERTEX_POINT('',#169927); +#169927 = CARTESIAN_POINT('',(109.553554,-100.5561,1.585)); +#169928 = LINE('',#169929,#169930); +#169929 = CARTESIAN_POINT('',(109.553554,-100.621463,1.585)); +#169930 = VECTOR('',#169931,1.); +#169931 = DIRECTION('',(0.,1.,0.)); +#169932 = ORIENTED_EDGE('',*,*,#169933,.T.); +#169933 = EDGE_CURVE('',#169926,#169934,#169936,.T.); +#169934 = VERTEX_POINT('',#169935); +#169935 = CARTESIAN_POINT('',(109.420373,-100.422919,1.585)); +#169936 = CIRCLE('',#169937,0.18686440374); +#169937 = AXIS2_PLACEMENT_3D('',#169938,#169939,#169940); +#169938 = CARTESIAN_POINT('',(109.372837,-100.603636,1.585)); +#169939 = DIRECTION('',(0.,0.,1.)); +#169940 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#169941 = ORIENTED_EDGE('',*,*,#169942,.T.); +#169942 = EDGE_CURVE('',#169934,#169943,#169945,.T.); +#169943 = VERTEX_POINT('',#169944); +#169944 = CARTESIAN_POINT('',(109.217688,-100.422919,1.585)); +#169945 = LINE('',#169946,#169947); +#169946 = CARTESIAN_POINT('',(109.420373,-100.422919,1.585)); +#169947 = VECTOR('',#169948,1.); +#169948 = DIRECTION('',(-1.,0.,0.)); +#169949 = ORIENTED_EDGE('',*,*,#169950,.T.); +#169950 = EDGE_CURVE('',#169943,#169951,#169953,.T.); +#169951 = VERTEX_POINT('',#169952); +#169952 = CARTESIAN_POINT('',(109.149172,-100.457177,1.585)); +#169953 = LINE('',#169954,#169955); +#169954 = CARTESIAN_POINT('',(109.217688,-100.422919,1.585)); +#169955 = VECTOR('',#169956,1.); +#169956 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#169957 = ORIENTED_EDGE('',*,*,#169958,.T.); +#169958 = EDGE_CURVE('',#169951,#169959,#169961,.T.); +#169959 = VERTEX_POINT('',#169960); +#169960 = CARTESIAN_POINT('',(109.098794,-100.505517,1.585)); +#169961 = LINE('',#169962,#169963); +#169962 = CARTESIAN_POINT('',(109.149172,-100.457177,1.585)); +#169963 = VECTOR('',#169964,1.); +#169964 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#169965 = ORIENTED_EDGE('',*,*,#169966,.T.); +#169966 = EDGE_CURVE('',#169959,#169967,#169969,.T.); +#169967 = VERTEX_POINT('',#169968); +#169968 = CARTESIAN_POINT('',(109.004093,-100.390124,1.585)); +#169969 = CIRCLE('',#169970,7.499996838527E-02); +#169970 = AXIS2_PLACEMENT_3D('',#169971,#169972,#169973); +#169971 = CARTESIAN_POINT('',(109.057126,-100.4431569724,1.585)); +#169972 = DIRECTION('',(0.,0.,-1.)); +#169973 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#169974 = ORIENTED_EDGE('',*,*,#169975,.T.); +#169975 = EDGE_CURVE('',#169967,#169825,#169976,.T.); +#169976 = LINE('',#169977,#169978); +#169977 = CARTESIAN_POINT('',(109.004093,-100.390124,1.585)); +#169978 = VECTOR('',#169979,1.); +#169979 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#169980 = PLANE('',#169981); +#169981 = AXIS2_PLACEMENT_3D('',#169982,#169983,#169984); +#169982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169983 = DIRECTION('',(0.,0.,1.)); +#169984 = DIRECTION('',(1.,0.,-0.)); +#169985 = SHELL_BASED_SURFACE_MODEL('',(#169986)); +#169986 = OPEN_SHELL('',(#169987)); +#169987 = ADVANCED_FACE('',(#169988,#170099),#170151,.T.); +#169988 = FACE_BOUND('',#169989,.F.); +#169989 = EDGE_LOOP('',(#169990,#170001,#170009,#170018,#170026,#170035, + #170043,#170051,#170060,#170068,#170076,#170084,#170093)); +#169990 = ORIENTED_EDGE('',*,*,#169991,.T.); +#169991 = EDGE_CURVE('',#169992,#169994,#169996,.T.); +#169992 = VERTEX_POINT('',#169993); +#169993 = CARTESIAN_POINT('',(95.84071,-100.333287,1.585)); +#169994 = VERTEX_POINT('',#169995); +#169995 = CARTESIAN_POINT('',(95.914269,-100.272919,1.585)); +#169996 = CIRCLE('',#169997,7.500074938989E-02); +#169997 = AXIS2_PLACEMENT_3D('',#169998,#169999,#170000); +#169998 = CARTESIAN_POINT('',(95.91426946611,-100.3479197493,1.585)); +#169999 = DIRECTION('',(0.,0.,-1.)); +#170000 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#170001 = ORIENTED_EDGE('',*,*,#170002,.T.); +#170002 = EDGE_CURVE('',#169994,#170003,#170005,.T.); +#170003 = VERTEX_POINT('',#170004); +#170004 = CARTESIAN_POINT('',(96.309853,-100.27436,1.585)); +#170005 = LINE('',#170006,#170007); +#170006 = CARTESIAN_POINT('',(95.914269,-100.272919,1.585)); +#170007 = VECTOR('',#170008,1.); +#170008 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170009 = ORIENTED_EDGE('',*,*,#170010,.T.); +#170010 = EDGE_CURVE('',#170003,#170011,#170013,.T.); +#170011 = VERTEX_POINT('',#170012); +#170012 = CARTESIAN_POINT('',(96.559256,-100.523763,1.585)); +#170013 = CIRCLE('',#170014,0.347870264855); +#170014 = AXIS2_PLACEMENT_3D('',#170015,#170016,#170017); +#170015 = CARTESIAN_POINT('',(96.222525265028,-100.6110907349,1.585)); +#170016 = DIRECTION('',(0.,0.,-1.)); +#170017 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170018 = ORIENTED_EDGE('',*,*,#170019,.T.); +#170019 = EDGE_CURVE('',#170011,#170020,#170022,.T.); +#170020 = VERTEX_POINT('',#170021); +#170021 = CARTESIAN_POINT('',(96.558034,-100.701062,1.585)); +#170022 = LINE('',#170023,#170024); +#170023 = CARTESIAN_POINT('',(96.559256,-100.523763,1.585)); +#170024 = VECTOR('',#170025,1.); +#170025 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#170026 = ORIENTED_EDGE('',*,*,#170027,.T.); +#170027 = EDGE_CURVE('',#170020,#170028,#170030,.T.); +#170028 = VERTEX_POINT('',#170029); +#170029 = CARTESIAN_POINT('',(96.309853,-100.945287,1.585)); +#170030 = CIRCLE('',#170031,0.348632345849); +#170031 = AXIS2_PLACEMENT_3D('',#170032,#170033,#170034); +#170032 = CARTESIAN_POINT('',(96.222084194037,-100.6078834593,1.585)); +#170033 = DIRECTION('',(0.,0.,-1.)); +#170034 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170035 = ORIENTED_EDGE('',*,*,#170036,.T.); +#170036 = EDGE_CURVE('',#170028,#170037,#170039,.T.); +#170037 = VERTEX_POINT('',#170038); +#170038 = CARTESIAN_POINT('',(96.296336,-100.946618,1.585)); +#170039 = LINE('',#170040,#170041); +#170040 = CARTESIAN_POINT('',(96.309853,-100.945287,1.585)); +#170041 = VECTOR('',#170042,1.); +#170042 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170043 = ORIENTED_EDGE('',*,*,#170044,.T.); +#170044 = EDGE_CURVE('',#170037,#170045,#170047,.T.); +#170045 = VERTEX_POINT('',#170046); +#170046 = CARTESIAN_POINT('',(96.55435,-101.317723,1.585)); +#170047 = LINE('',#170048,#170049); +#170048 = CARTESIAN_POINT('',(96.296336,-100.946618,1.585)); +#170049 = VECTOR('',#170050,1.); +#170050 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170051 = ORIENTED_EDGE('',*,*,#170052,.T.); +#170052 = EDGE_CURVE('',#170045,#170053,#170055,.T.); +#170053 = VERTEX_POINT('',#170054); +#170054 = CARTESIAN_POINT('',(96.424255,-101.390929,1.585)); +#170055 = CIRCLE('',#170056,7.500005951702E-02); +#170056 = AXIS2_PLACEMENT_3D('',#170057,#170058,#170059); +#170057 = CARTESIAN_POINT('',(96.485697062942,-101.3479187473,1.585)); +#170058 = DIRECTION('',(0.,0.,-1.)); +#170059 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170060 = ORIENTED_EDGE('',*,*,#170061,.T.); +#170061 = EDGE_CURVE('',#170053,#170062,#170064,.T.); +#170062 = VERTEX_POINT('',#170063); +#170063 = CARTESIAN_POINT('',(96.113315,-100.946728,1.585)); +#170064 = LINE('',#170065,#170066); +#170065 = CARTESIAN_POINT('',(96.424255,-101.390929,1.585)); +#170066 = VECTOR('',#170067,1.); +#170067 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170068 = ORIENTED_EDGE('',*,*,#170069,.T.); +#170069 = EDGE_CURVE('',#170062,#170070,#170072,.T.); +#170070 = VERTEX_POINT('',#170071); +#170071 = CARTESIAN_POINT('',(95.989269,-100.946728,1.585)); +#170072 = LINE('',#170073,#170074); +#170073 = CARTESIAN_POINT('',(96.113315,-100.946728,1.585)); +#170074 = VECTOR('',#170075,1.); +#170075 = DIRECTION('',(-1.,0.,0.)); +#170076 = ORIENTED_EDGE('',*,*,#170077,.T.); +#170077 = EDGE_CURVE('',#170070,#170078,#170080,.T.); +#170078 = VERTEX_POINT('',#170079); +#170079 = CARTESIAN_POINT('',(95.987828,-101.362551,1.585)); +#170080 = LINE('',#170081,#170082); +#170081 = CARTESIAN_POINT('',(95.989269,-100.946728,1.585)); +#170082 = VECTOR('',#170083,1.); +#170083 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170084 = ORIENTED_EDGE('',*,*,#170085,.T.); +#170085 = EDGE_CURVE('',#170078,#170086,#170088,.T.); +#170086 = VERTEX_POINT('',#170087); +#170087 = CARTESIAN_POINT('',(95.839269,-101.347919,1.585)); +#170088 = CIRCLE('',#170089,7.500006711464E-02); +#170089 = AXIS2_PLACEMENT_3D('',#170090,#170091,#170092); +#170090 = CARTESIAN_POINT('',(95.914269067115,-101.3479190671,1.585)); +#170091 = DIRECTION('',(-0.,0.,-1.)); +#170092 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170093 = ORIENTED_EDGE('',*,*,#170094,.T.); +#170094 = EDGE_CURVE('',#170086,#169992,#170095,.T.); +#170095 = LINE('',#170096,#170097); +#170096 = CARTESIAN_POINT('',(95.839269,-101.347919,1.585)); +#170097 = VECTOR('',#170098,1.); +#170098 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170099 = FACE_BOUND('',#170100,.F.); +#170100 = EDGE_LOOP('',(#170101,#170112,#170120,#170128,#170136,#170145) + ); +#170101 = ORIENTED_EDGE('',*,*,#170102,.T.); +#170102 = EDGE_CURVE('',#170103,#170105,#170107,.T.); +#170103 = VERTEX_POINT('',#170104); +#170104 = CARTESIAN_POINT('',(96.410697,-100.5561,1.585)); +#170105 = VERTEX_POINT('',#170106); +#170106 = CARTESIAN_POINT('',(96.277516,-100.422919,1.585)); +#170107 = CIRCLE('',#170108,0.18686440374); +#170108 = AXIS2_PLACEMENT_3D('',#170109,#170110,#170111); +#170109 = CARTESIAN_POINT('',(96.22998,-100.603636,1.585)); +#170110 = DIRECTION('',(0.,0.,1.)); +#170111 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170112 = ORIENTED_EDGE('',*,*,#170113,.T.); +#170113 = EDGE_CURVE('',#170105,#170114,#170116,.T.); +#170114 = VERTEX_POINT('',#170115); +#170115 = CARTESIAN_POINT('',(95.989269,-100.422919,1.585)); +#170116 = LINE('',#170117,#170118); +#170117 = CARTESIAN_POINT('',(96.277516,-100.422919,1.585)); +#170118 = VECTOR('',#170119,1.); +#170119 = DIRECTION('',(-1.,0.,0.)); +#170120 = ORIENTED_EDGE('',*,*,#170121,.T.); +#170121 = EDGE_CURVE('',#170114,#170122,#170124,.T.); +#170122 = VERTEX_POINT('',#170123); +#170123 = CARTESIAN_POINT('',(95.989269,-100.796728,1.585)); +#170124 = LINE('',#170125,#170126); +#170125 = CARTESIAN_POINT('',(95.989269,-100.422919,1.585)); +#170126 = VECTOR('',#170127,1.); +#170127 = DIRECTION('',(0.,-1.,0.)); +#170128 = ORIENTED_EDGE('',*,*,#170129,.T.); +#170129 = EDGE_CURVE('',#170122,#170130,#170132,.T.); +#170130 = VERTEX_POINT('',#170131); +#170131 = CARTESIAN_POINT('',(96.277516,-100.796728,1.585)); +#170132 = LINE('',#170133,#170134); +#170133 = CARTESIAN_POINT('',(95.989269,-100.796728,1.585)); +#170134 = VECTOR('',#170135,1.); +#170135 = DIRECTION('',(1.,0.,0.)); +#170136 = ORIENTED_EDGE('',*,*,#170137,.T.); +#170137 = EDGE_CURVE('',#170130,#170138,#170140,.T.); +#170138 = VERTEX_POINT('',#170139); +#170139 = CARTESIAN_POINT('',(96.410697,-100.663547,1.585)); +#170140 = CIRCLE('',#170141,0.18686440374); +#170141 = AXIS2_PLACEMENT_3D('',#170142,#170143,#170144); +#170142 = CARTESIAN_POINT('',(96.22998,-100.616011,1.585)); +#170143 = DIRECTION('',(0.,0.,1.)); +#170144 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170145 = ORIENTED_EDGE('',*,*,#170146,.T.); +#170146 = EDGE_CURVE('',#170138,#170103,#170147,.T.); +#170147 = LINE('',#170148,#170149); +#170148 = CARTESIAN_POINT('',(96.410697,-100.663547,1.585)); +#170149 = VECTOR('',#170150,1.); +#170150 = DIRECTION('',(0.,1.,0.)); +#170151 = PLANE('',#170152); +#170152 = AXIS2_PLACEMENT_3D('',#170153,#170154,#170155); +#170153 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170154 = DIRECTION('',(0.,0.,1.)); +#170155 = DIRECTION('',(1.,0.,-0.)); +#170156 = SHELL_BASED_SURFACE_MODEL('',(#170157)); +#170157 = OPEN_SHELL('',(#170158)); +#170158 = ADVANCED_FACE('',(#170159,#170270),#170322,.T.); +#170159 = FACE_BOUND('',#170160,.F.); +#170160 = EDGE_LOOP('',(#170161,#170172,#170180,#170189,#170197,#170206, + #170214,#170222,#170231,#170239,#170247,#170255,#170264)); +#170161 = ORIENTED_EDGE('',*,*,#170162,.T.); +#170162 = EDGE_CURVE('',#170163,#170165,#170167,.T.); +#170163 = VERTEX_POINT('',#170164); +#170164 = CARTESIAN_POINT('',(99.793091,-100.333287,1.585)); +#170165 = VERTEX_POINT('',#170166); +#170166 = CARTESIAN_POINT('',(99.86665,-100.272919,1.585)); +#170167 = CIRCLE('',#170168,7.500074938984E-02); +#170168 = AXIS2_PLACEMENT_3D('',#170169,#170170,#170171); +#170169 = CARTESIAN_POINT('',(99.86665046611,-100.3479197493,1.585)); +#170170 = DIRECTION('',(0.,0.,-1.)); +#170171 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170172 = ORIENTED_EDGE('',*,*,#170173,.T.); +#170173 = EDGE_CURVE('',#170165,#170174,#170176,.T.); +#170174 = VERTEX_POINT('',#170175); +#170175 = CARTESIAN_POINT('',(100.262234,-100.27436,1.585)); +#170176 = LINE('',#170177,#170178); +#170177 = CARTESIAN_POINT('',(99.86665,-100.272919,1.585)); +#170178 = VECTOR('',#170179,1.); +#170179 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170180 = ORIENTED_EDGE('',*,*,#170181,.T.); +#170181 = EDGE_CURVE('',#170174,#170182,#170184,.T.); +#170182 = VERTEX_POINT('',#170183); +#170183 = CARTESIAN_POINT('',(100.511637,-100.523763,1.585)); +#170184 = CIRCLE('',#170185,0.347870264855); +#170185 = AXIS2_PLACEMENT_3D('',#170186,#170187,#170188); +#170186 = CARTESIAN_POINT('',(100.17490626502,-100.6110907349,1.585)); +#170187 = DIRECTION('',(0.,0.,-1.)); +#170188 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170189 = ORIENTED_EDGE('',*,*,#170190,.T.); +#170190 = EDGE_CURVE('',#170182,#170191,#170193,.T.); +#170191 = VERTEX_POINT('',#170192); +#170192 = CARTESIAN_POINT('',(100.510415,-100.701062,1.585)); +#170193 = LINE('',#170194,#170195); +#170194 = CARTESIAN_POINT('',(100.511637,-100.523763,1.585)); +#170195 = VECTOR('',#170196,1.); +#170196 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#170197 = ORIENTED_EDGE('',*,*,#170198,.T.); +#170198 = EDGE_CURVE('',#170191,#170199,#170201,.T.); +#170199 = VERTEX_POINT('',#170200); +#170200 = CARTESIAN_POINT('',(100.262234,-100.945287,1.585)); +#170201 = CIRCLE('',#170202,0.348632345848); +#170202 = AXIS2_PLACEMENT_3D('',#170203,#170204,#170205); +#170203 = CARTESIAN_POINT('',(100.17446519403,-100.6078834593,1.585)); +#170204 = DIRECTION('',(0.,0.,-1.)); +#170205 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170206 = ORIENTED_EDGE('',*,*,#170207,.T.); +#170207 = EDGE_CURVE('',#170199,#170208,#170210,.T.); +#170208 = VERTEX_POINT('',#170209); +#170209 = CARTESIAN_POINT('',(100.248717,-100.946618,1.585)); +#170210 = LINE('',#170211,#170212); +#170211 = CARTESIAN_POINT('',(100.262234,-100.945287,1.585)); +#170212 = VECTOR('',#170213,1.); +#170213 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170214 = ORIENTED_EDGE('',*,*,#170215,.T.); +#170215 = EDGE_CURVE('',#170208,#170216,#170218,.T.); +#170216 = VERTEX_POINT('',#170217); +#170217 = CARTESIAN_POINT('',(100.506731,-101.317723,1.585)); +#170218 = LINE('',#170219,#170220); +#170219 = CARTESIAN_POINT('',(100.248717,-100.946618,1.585)); +#170220 = VECTOR('',#170221,1.); +#170221 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170222 = ORIENTED_EDGE('',*,*,#170223,.T.); +#170223 = EDGE_CURVE('',#170216,#170224,#170226,.T.); +#170224 = VERTEX_POINT('',#170225); +#170225 = CARTESIAN_POINT('',(100.376636,-101.390929,1.585)); +#170226 = CIRCLE('',#170227,7.500005951702E-02); +#170227 = AXIS2_PLACEMENT_3D('',#170228,#170229,#170230); +#170228 = CARTESIAN_POINT('',(100.43807806294,-101.3479187473,1.585)); +#170229 = DIRECTION('',(0.,0.,-1.)); +#170230 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170231 = ORIENTED_EDGE('',*,*,#170232,.T.); +#170232 = EDGE_CURVE('',#170224,#170233,#170235,.T.); +#170233 = VERTEX_POINT('',#170234); +#170234 = CARTESIAN_POINT('',(100.065696,-100.946728,1.585)); +#170235 = LINE('',#170236,#170237); +#170236 = CARTESIAN_POINT('',(100.376636,-101.390929,1.585)); +#170237 = VECTOR('',#170238,1.); +#170238 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170239 = ORIENTED_EDGE('',*,*,#170240,.T.); +#170240 = EDGE_CURVE('',#170233,#170241,#170243,.T.); +#170241 = VERTEX_POINT('',#170242); +#170242 = CARTESIAN_POINT('',(99.94165,-100.946728,1.585)); +#170243 = LINE('',#170244,#170245); +#170244 = CARTESIAN_POINT('',(100.065696,-100.946728,1.585)); +#170245 = VECTOR('',#170246,1.); +#170246 = DIRECTION('',(-1.,0.,0.)); +#170247 = ORIENTED_EDGE('',*,*,#170248,.T.); +#170248 = EDGE_CURVE('',#170241,#170249,#170251,.T.); +#170249 = VERTEX_POINT('',#170250); +#170250 = CARTESIAN_POINT('',(99.940209,-101.362551,1.585)); +#170251 = LINE('',#170252,#170253); +#170252 = CARTESIAN_POINT('',(99.94165,-100.946728,1.585)); +#170253 = VECTOR('',#170254,1.); +#170254 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170255 = ORIENTED_EDGE('',*,*,#170256,.T.); +#170256 = EDGE_CURVE('',#170249,#170257,#170259,.T.); +#170257 = VERTEX_POINT('',#170258); +#170258 = CARTESIAN_POINT('',(99.79165,-101.347919,1.585)); +#170259 = CIRCLE('',#170260,7.500006711464E-02); +#170260 = AXIS2_PLACEMENT_3D('',#170261,#170262,#170263); +#170261 = CARTESIAN_POINT('',(99.866650067115,-101.3479190671,1.585)); +#170262 = DIRECTION('',(-0.,0.,-1.)); +#170263 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170264 = ORIENTED_EDGE('',*,*,#170265,.T.); +#170265 = EDGE_CURVE('',#170257,#170163,#170266,.T.); +#170266 = LINE('',#170267,#170268); +#170267 = CARTESIAN_POINT('',(99.79165,-101.347919,1.585)); +#170268 = VECTOR('',#170269,1.); +#170269 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170270 = FACE_BOUND('',#170271,.F.); +#170271 = EDGE_LOOP('',(#170272,#170283,#170291,#170299,#170307,#170316) + ); +#170272 = ORIENTED_EDGE('',*,*,#170273,.T.); +#170273 = EDGE_CURVE('',#170274,#170276,#170278,.T.); +#170274 = VERTEX_POINT('',#170275); +#170275 = CARTESIAN_POINT('',(100.363078,-100.5561,1.585)); +#170276 = VERTEX_POINT('',#170277); +#170277 = CARTESIAN_POINT('',(100.229897,-100.422919,1.585)); +#170278 = CIRCLE('',#170279,0.18686440374); +#170279 = AXIS2_PLACEMENT_3D('',#170280,#170281,#170282); +#170280 = CARTESIAN_POINT('',(100.182361,-100.603636,1.585)); +#170281 = DIRECTION('',(0.,0.,1.)); +#170282 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#170283 = ORIENTED_EDGE('',*,*,#170284,.T.); +#170284 = EDGE_CURVE('',#170276,#170285,#170287,.T.); +#170285 = VERTEX_POINT('',#170286); +#170286 = CARTESIAN_POINT('',(99.94165,-100.422919,1.585)); +#170287 = LINE('',#170288,#170289); +#170288 = CARTESIAN_POINT('',(100.229897,-100.422919,1.585)); +#170289 = VECTOR('',#170290,1.); +#170290 = DIRECTION('',(-1.,0.,0.)); +#170291 = ORIENTED_EDGE('',*,*,#170292,.T.); +#170292 = EDGE_CURVE('',#170285,#170293,#170295,.T.); +#170293 = VERTEX_POINT('',#170294); +#170294 = CARTESIAN_POINT('',(99.94165,-100.796728,1.585)); +#170295 = LINE('',#170296,#170297); +#170296 = CARTESIAN_POINT('',(99.94165,-100.422919,1.585)); +#170297 = VECTOR('',#170298,1.); +#170298 = DIRECTION('',(0.,-1.,0.)); +#170299 = ORIENTED_EDGE('',*,*,#170300,.T.); +#170300 = EDGE_CURVE('',#170293,#170301,#170303,.T.); +#170301 = VERTEX_POINT('',#170302); +#170302 = CARTESIAN_POINT('',(100.229897,-100.796728,1.585)); +#170303 = LINE('',#170304,#170305); +#170304 = CARTESIAN_POINT('',(99.94165,-100.796728,1.585)); +#170305 = VECTOR('',#170306,1.); +#170306 = DIRECTION('',(1.,0.,0.)); +#170307 = ORIENTED_EDGE('',*,*,#170308,.T.); +#170308 = EDGE_CURVE('',#170301,#170309,#170311,.T.); +#170309 = VERTEX_POINT('',#170310); +#170310 = CARTESIAN_POINT('',(100.363078,-100.663547,1.585)); +#170311 = CIRCLE('',#170312,0.18686440374); +#170312 = AXIS2_PLACEMENT_3D('',#170313,#170314,#170315); +#170313 = CARTESIAN_POINT('',(100.182361,-100.616011,1.585)); +#170314 = DIRECTION('',(0.,0.,1.)); +#170315 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170316 = ORIENTED_EDGE('',*,*,#170317,.T.); +#170317 = EDGE_CURVE('',#170309,#170274,#170318,.T.); +#170318 = LINE('',#170319,#170320); +#170319 = CARTESIAN_POINT('',(100.363078,-100.663547,1.585)); +#170320 = VECTOR('',#170321,1.); +#170321 = DIRECTION('',(0.,1.,0.)); +#170322 = PLANE('',#170323); +#170323 = AXIS2_PLACEMENT_3D('',#170324,#170325,#170326); +#170324 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170325 = DIRECTION('',(0.,0.,1.)); +#170326 = DIRECTION('',(1.,0.,-0.)); +#170327 = SHELL_BASED_SURFACE_MODEL('',(#170328)); +#170328 = OPEN_SHELL('',(#170329)); +#170329 = ADVANCED_FACE('',(#170330,#170441),#170493,.T.); +#170330 = FACE_BOUND('',#170331,.F.); +#170331 = EDGE_LOOP('',(#170332,#170343,#170351,#170360,#170368,#170377, + #170385,#170393,#170402,#170410,#170418,#170426,#170435)); +#170332 = ORIENTED_EDGE('',*,*,#170333,.T.); +#170333 = EDGE_CURVE('',#170334,#170336,#170338,.T.); +#170334 = VERTEX_POINT('',#170335); +#170335 = CARTESIAN_POINT('',(103.578805,-100.333287,1.585)); +#170336 = VERTEX_POINT('',#170337); +#170337 = CARTESIAN_POINT('',(103.652364,-100.272919,1.585)); +#170338 = CIRCLE('',#170339,7.500074938983E-02); +#170339 = AXIS2_PLACEMENT_3D('',#170340,#170341,#170342); +#170340 = CARTESIAN_POINT('',(103.65236446611,-100.3479197493,1.585)); +#170341 = DIRECTION('',(0.,0.,-1.)); +#170342 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170343 = ORIENTED_EDGE('',*,*,#170344,.T.); +#170344 = EDGE_CURVE('',#170336,#170345,#170347,.T.); +#170345 = VERTEX_POINT('',#170346); +#170346 = CARTESIAN_POINT('',(104.047948,-100.27436,1.585)); +#170347 = LINE('',#170348,#170349); +#170348 = CARTESIAN_POINT('',(103.652364,-100.272919,1.585)); +#170349 = VECTOR('',#170350,1.); +#170350 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170351 = ORIENTED_EDGE('',*,*,#170352,.T.); +#170352 = EDGE_CURVE('',#170345,#170353,#170355,.T.); +#170353 = VERTEX_POINT('',#170354); +#170354 = CARTESIAN_POINT('',(104.297351,-100.523763,1.585)); +#170355 = CIRCLE('',#170356,0.347870264855); +#170356 = AXIS2_PLACEMENT_3D('',#170357,#170358,#170359); +#170357 = CARTESIAN_POINT('',(103.96062026502,-100.6110907349,1.585)); +#170358 = DIRECTION('',(0.,0.,-1.)); +#170359 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170360 = ORIENTED_EDGE('',*,*,#170361,.T.); +#170361 = EDGE_CURVE('',#170353,#170362,#170364,.T.); +#170362 = VERTEX_POINT('',#170363); +#170363 = CARTESIAN_POINT('',(104.296129,-100.701062,1.585)); +#170364 = LINE('',#170365,#170366); +#170365 = CARTESIAN_POINT('',(104.297351,-100.523763,1.585)); +#170366 = VECTOR('',#170367,1.); +#170367 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#170368 = ORIENTED_EDGE('',*,*,#170369,.T.); +#170369 = EDGE_CURVE('',#170362,#170370,#170372,.T.); +#170370 = VERTEX_POINT('',#170371); +#170371 = CARTESIAN_POINT('',(104.047948,-100.945287,1.585)); +#170372 = CIRCLE('',#170373,0.348632345848); +#170373 = AXIS2_PLACEMENT_3D('',#170374,#170375,#170376); +#170374 = CARTESIAN_POINT('',(103.96017919403,-100.6078834593,1.585)); +#170375 = DIRECTION('',(0.,0.,-1.)); +#170376 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170377 = ORIENTED_EDGE('',*,*,#170378,.T.); +#170378 = EDGE_CURVE('',#170370,#170379,#170381,.T.); +#170379 = VERTEX_POINT('',#170380); +#170380 = CARTESIAN_POINT('',(104.034431,-100.946618,1.585)); +#170381 = LINE('',#170382,#170383); +#170382 = CARTESIAN_POINT('',(104.047948,-100.945287,1.585)); +#170383 = VECTOR('',#170384,1.); +#170384 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170385 = ORIENTED_EDGE('',*,*,#170386,.T.); +#170386 = EDGE_CURVE('',#170379,#170387,#170389,.T.); +#170387 = VERTEX_POINT('',#170388); +#170388 = CARTESIAN_POINT('',(104.292445,-101.317723,1.585)); +#170389 = LINE('',#170390,#170391); +#170390 = CARTESIAN_POINT('',(104.034431,-100.946618,1.585)); +#170391 = VECTOR('',#170392,1.); +#170392 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170393 = ORIENTED_EDGE('',*,*,#170394,.T.); +#170394 = EDGE_CURVE('',#170387,#170395,#170397,.T.); +#170395 = VERTEX_POINT('',#170396); +#170396 = CARTESIAN_POINT('',(104.16235,-101.390929,1.585)); +#170397 = CIRCLE('',#170398,7.500005951702E-02); +#170398 = AXIS2_PLACEMENT_3D('',#170399,#170400,#170401); +#170399 = CARTESIAN_POINT('',(104.22379206294,-101.3479187473,1.585)); +#170400 = DIRECTION('',(0.,0.,-1.)); +#170401 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170402 = ORIENTED_EDGE('',*,*,#170403,.T.); +#170403 = EDGE_CURVE('',#170395,#170404,#170406,.T.); +#170404 = VERTEX_POINT('',#170405); +#170405 = CARTESIAN_POINT('',(103.85141,-100.946728,1.585)); +#170406 = LINE('',#170407,#170408); +#170407 = CARTESIAN_POINT('',(104.16235,-101.390929,1.585)); +#170408 = VECTOR('',#170409,1.); +#170409 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170410 = ORIENTED_EDGE('',*,*,#170411,.T.); +#170411 = EDGE_CURVE('',#170404,#170412,#170414,.T.); +#170412 = VERTEX_POINT('',#170413); +#170413 = CARTESIAN_POINT('',(103.727364,-100.946728,1.585)); +#170414 = LINE('',#170415,#170416); +#170415 = CARTESIAN_POINT('',(103.85141,-100.946728,1.585)); +#170416 = VECTOR('',#170417,1.); +#170417 = DIRECTION('',(-1.,0.,0.)); +#170418 = ORIENTED_EDGE('',*,*,#170419,.T.); +#170419 = EDGE_CURVE('',#170412,#170420,#170422,.T.); +#170420 = VERTEX_POINT('',#170421); +#170421 = CARTESIAN_POINT('',(103.725923,-101.362551,1.585)); +#170422 = LINE('',#170423,#170424); +#170423 = CARTESIAN_POINT('',(103.727364,-100.946728,1.585)); +#170424 = VECTOR('',#170425,1.); +#170425 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170426 = ORIENTED_EDGE('',*,*,#170427,.T.); +#170427 = EDGE_CURVE('',#170420,#170428,#170430,.T.); +#170428 = VERTEX_POINT('',#170429); +#170429 = CARTESIAN_POINT('',(103.577364,-101.347919,1.585)); +#170430 = CIRCLE('',#170431,7.500006711463E-02); +#170431 = AXIS2_PLACEMENT_3D('',#170432,#170433,#170434); +#170432 = CARTESIAN_POINT('',(103.65236406711,-101.3479190671,1.585)); +#170433 = DIRECTION('',(-0.,0.,-1.)); +#170434 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170435 = ORIENTED_EDGE('',*,*,#170436,.T.); +#170436 = EDGE_CURVE('',#170428,#170334,#170437,.T.); +#170437 = LINE('',#170438,#170439); +#170438 = CARTESIAN_POINT('',(103.577364,-101.347919,1.585)); +#170439 = VECTOR('',#170440,1.); +#170440 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170441 = FACE_BOUND('',#170442,.F.); +#170442 = EDGE_LOOP('',(#170443,#170454,#170462,#170470,#170478,#170487) + ); +#170443 = ORIENTED_EDGE('',*,*,#170444,.T.); +#170444 = EDGE_CURVE('',#170445,#170447,#170449,.T.); +#170445 = VERTEX_POINT('',#170446); +#170446 = CARTESIAN_POINT('',(104.148792,-100.5561,1.585)); +#170447 = VERTEX_POINT('',#170448); +#170448 = CARTESIAN_POINT('',(104.015611,-100.422919,1.585)); +#170449 = CIRCLE('',#170450,0.18686440374); +#170450 = AXIS2_PLACEMENT_3D('',#170451,#170452,#170453); +#170451 = CARTESIAN_POINT('',(103.968075,-100.603636,1.585)); +#170452 = DIRECTION('',(0.,0.,1.)); +#170453 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170454 = ORIENTED_EDGE('',*,*,#170455,.T.); +#170455 = EDGE_CURVE('',#170447,#170456,#170458,.T.); +#170456 = VERTEX_POINT('',#170457); +#170457 = CARTESIAN_POINT('',(103.727364,-100.422919,1.585)); +#170458 = LINE('',#170459,#170460); +#170459 = CARTESIAN_POINT('',(104.015611,-100.422919,1.585)); +#170460 = VECTOR('',#170461,1.); +#170461 = DIRECTION('',(-1.,0.,0.)); +#170462 = ORIENTED_EDGE('',*,*,#170463,.T.); +#170463 = EDGE_CURVE('',#170456,#170464,#170466,.T.); +#170464 = VERTEX_POINT('',#170465); +#170465 = CARTESIAN_POINT('',(103.727364,-100.796728,1.585)); +#170466 = LINE('',#170467,#170468); +#170467 = CARTESIAN_POINT('',(103.727364,-100.422919,1.585)); +#170468 = VECTOR('',#170469,1.); +#170469 = DIRECTION('',(0.,-1.,0.)); +#170470 = ORIENTED_EDGE('',*,*,#170471,.T.); +#170471 = EDGE_CURVE('',#170464,#170472,#170474,.T.); +#170472 = VERTEX_POINT('',#170473); +#170473 = CARTESIAN_POINT('',(104.015611,-100.796728,1.585)); +#170474 = LINE('',#170475,#170476); +#170475 = CARTESIAN_POINT('',(103.727364,-100.796728,1.585)); +#170476 = VECTOR('',#170477,1.); +#170477 = DIRECTION('',(1.,0.,0.)); +#170478 = ORIENTED_EDGE('',*,*,#170479,.T.); +#170479 = EDGE_CURVE('',#170472,#170480,#170482,.T.); +#170480 = VERTEX_POINT('',#170481); +#170481 = CARTESIAN_POINT('',(104.148792,-100.663547,1.585)); +#170482 = CIRCLE('',#170483,0.18686440374); +#170483 = AXIS2_PLACEMENT_3D('',#170484,#170485,#170486); +#170484 = CARTESIAN_POINT('',(103.968075,-100.616011,1.585)); +#170485 = DIRECTION('',(0.,0.,1.)); +#170486 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170487 = ORIENTED_EDGE('',*,*,#170488,.T.); +#170488 = EDGE_CURVE('',#170480,#170445,#170489,.T.); +#170489 = LINE('',#170490,#170491); +#170490 = CARTESIAN_POINT('',(104.148792,-100.663547,1.585)); +#170491 = VECTOR('',#170492,1.); +#170492 = DIRECTION('',(0.,1.,0.)); +#170493 = PLANE('',#170494); +#170494 = AXIS2_PLACEMENT_3D('',#170495,#170496,#170497); +#170495 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170496 = DIRECTION('',(0.,0.,1.)); +#170497 = DIRECTION('',(1.,0.,-0.)); +#170498 = SHELL_BASED_SURFACE_MODEL('',(#170499)); +#170499 = OPEN_SHELL('',(#170500)); +#170500 = ADVANCED_FACE('',(#170501,#170612),#170664,.T.); +#170501 = FACE_BOUND('',#170502,.F.); +#170502 = EDGE_LOOP('',(#170503,#170514,#170522,#170531,#170539,#170548, + #170556,#170564,#170573,#170581,#170589,#170597,#170606)); +#170503 = ORIENTED_EDGE('',*,*,#170504,.T.); +#170504 = EDGE_CURVE('',#170505,#170507,#170509,.T.); +#170505 = VERTEX_POINT('',#170506); +#170506 = CARTESIAN_POINT('',(107.078805,-100.333287,1.585)); +#170507 = VERTEX_POINT('',#170508); +#170508 = CARTESIAN_POINT('',(107.152364,-100.272919,1.585)); +#170509 = CIRCLE('',#170510,7.500074938983E-02); +#170510 = AXIS2_PLACEMENT_3D('',#170511,#170512,#170513); +#170511 = CARTESIAN_POINT('',(107.15236446611,-100.3479197493,1.585)); +#170512 = DIRECTION('',(0.,0.,-1.)); +#170513 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170514 = ORIENTED_EDGE('',*,*,#170515,.T.); +#170515 = EDGE_CURVE('',#170507,#170516,#170518,.T.); +#170516 = VERTEX_POINT('',#170517); +#170517 = CARTESIAN_POINT('',(107.547948,-100.27436,1.585)); +#170518 = LINE('',#170519,#170520); +#170519 = CARTESIAN_POINT('',(107.152364,-100.272919,1.585)); +#170520 = VECTOR('',#170521,1.); +#170521 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170522 = ORIENTED_EDGE('',*,*,#170523,.T.); +#170523 = EDGE_CURVE('',#170516,#170524,#170526,.T.); +#170524 = VERTEX_POINT('',#170525); +#170525 = CARTESIAN_POINT('',(107.797351,-100.523763,1.585)); +#170526 = CIRCLE('',#170527,0.347870264855); +#170527 = AXIS2_PLACEMENT_3D('',#170528,#170529,#170530); +#170528 = CARTESIAN_POINT('',(107.46062026502,-100.6110907349,1.585)); +#170529 = DIRECTION('',(0.,0.,-1.)); +#170530 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170531 = ORIENTED_EDGE('',*,*,#170532,.T.); +#170532 = EDGE_CURVE('',#170524,#170533,#170535,.T.); +#170533 = VERTEX_POINT('',#170534); +#170534 = CARTESIAN_POINT('',(107.796129,-100.701062,1.585)); +#170535 = LINE('',#170536,#170537); +#170536 = CARTESIAN_POINT('',(107.797351,-100.523763,1.585)); +#170537 = VECTOR('',#170538,1.); +#170538 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#170539 = ORIENTED_EDGE('',*,*,#170540,.T.); +#170540 = EDGE_CURVE('',#170533,#170541,#170543,.T.); +#170541 = VERTEX_POINT('',#170542); +#170542 = CARTESIAN_POINT('',(107.547948,-100.945287,1.585)); +#170543 = CIRCLE('',#170544,0.348632345848); +#170544 = AXIS2_PLACEMENT_3D('',#170545,#170546,#170547); +#170545 = CARTESIAN_POINT('',(107.46017919403,-100.6078834593,1.585)); +#170546 = DIRECTION('',(0.,0.,-1.)); +#170547 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170548 = ORIENTED_EDGE('',*,*,#170549,.T.); +#170549 = EDGE_CURVE('',#170541,#170550,#170552,.T.); +#170550 = VERTEX_POINT('',#170551); +#170551 = CARTESIAN_POINT('',(107.534431,-100.946618,1.585)); +#170552 = LINE('',#170553,#170554); +#170553 = CARTESIAN_POINT('',(107.547948,-100.945287,1.585)); +#170554 = VECTOR('',#170555,1.); +#170555 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170556 = ORIENTED_EDGE('',*,*,#170557,.T.); +#170557 = EDGE_CURVE('',#170550,#170558,#170560,.T.); +#170558 = VERTEX_POINT('',#170559); +#170559 = CARTESIAN_POINT('',(107.792445,-101.317723,1.585)); +#170560 = LINE('',#170561,#170562); +#170561 = CARTESIAN_POINT('',(107.534431,-100.946618,1.585)); +#170562 = VECTOR('',#170563,1.); +#170563 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170564 = ORIENTED_EDGE('',*,*,#170565,.T.); +#170565 = EDGE_CURVE('',#170558,#170566,#170568,.T.); +#170566 = VERTEX_POINT('',#170567); +#170567 = CARTESIAN_POINT('',(107.66235,-101.390929,1.585)); +#170568 = CIRCLE('',#170569,7.500005951702E-02); +#170569 = AXIS2_PLACEMENT_3D('',#170570,#170571,#170572); +#170570 = CARTESIAN_POINT('',(107.72379206294,-101.3479187473,1.585)); +#170571 = DIRECTION('',(0.,0.,-1.)); +#170572 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170573 = ORIENTED_EDGE('',*,*,#170574,.T.); +#170574 = EDGE_CURVE('',#170566,#170575,#170577,.T.); +#170575 = VERTEX_POINT('',#170576); +#170576 = CARTESIAN_POINT('',(107.35141,-100.946728,1.585)); +#170577 = LINE('',#170578,#170579); +#170578 = CARTESIAN_POINT('',(107.66235,-101.390929,1.585)); +#170579 = VECTOR('',#170580,1.); +#170580 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170581 = ORIENTED_EDGE('',*,*,#170582,.T.); +#170582 = EDGE_CURVE('',#170575,#170583,#170585,.T.); +#170583 = VERTEX_POINT('',#170584); +#170584 = CARTESIAN_POINT('',(107.227364,-100.946728,1.585)); +#170585 = LINE('',#170586,#170587); +#170586 = CARTESIAN_POINT('',(107.35141,-100.946728,1.585)); +#170587 = VECTOR('',#170588,1.); +#170588 = DIRECTION('',(-1.,0.,0.)); +#170589 = ORIENTED_EDGE('',*,*,#170590,.T.); +#170590 = EDGE_CURVE('',#170583,#170591,#170593,.T.); +#170591 = VERTEX_POINT('',#170592); +#170592 = CARTESIAN_POINT('',(107.225923,-101.362551,1.585)); +#170593 = LINE('',#170594,#170595); +#170594 = CARTESIAN_POINT('',(107.227364,-100.946728,1.585)); +#170595 = VECTOR('',#170596,1.); +#170596 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170597 = ORIENTED_EDGE('',*,*,#170598,.T.); +#170598 = EDGE_CURVE('',#170591,#170599,#170601,.T.); +#170599 = VERTEX_POINT('',#170600); +#170600 = CARTESIAN_POINT('',(107.077364,-101.347919,1.585)); +#170601 = CIRCLE('',#170602,7.500006711463E-02); +#170602 = AXIS2_PLACEMENT_3D('',#170603,#170604,#170605); +#170603 = CARTESIAN_POINT('',(107.15236406711,-101.3479190671,1.585)); +#170604 = DIRECTION('',(-0.,0.,-1.)); +#170605 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170606 = ORIENTED_EDGE('',*,*,#170607,.T.); +#170607 = EDGE_CURVE('',#170599,#170505,#170608,.T.); +#170608 = LINE('',#170609,#170610); +#170609 = CARTESIAN_POINT('',(107.077364,-101.347919,1.585)); +#170610 = VECTOR('',#170611,1.); +#170611 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170612 = FACE_BOUND('',#170613,.F.); +#170613 = EDGE_LOOP('',(#170614,#170625,#170633,#170641,#170649,#170658) + ); +#170614 = ORIENTED_EDGE('',*,*,#170615,.T.); +#170615 = EDGE_CURVE('',#170616,#170618,#170620,.T.); +#170616 = VERTEX_POINT('',#170617); +#170617 = CARTESIAN_POINT('',(107.648792,-100.5561,1.585)); +#170618 = VERTEX_POINT('',#170619); +#170619 = CARTESIAN_POINT('',(107.515611,-100.422919,1.585)); +#170620 = CIRCLE('',#170621,0.18686440374); +#170621 = AXIS2_PLACEMENT_3D('',#170622,#170623,#170624); +#170622 = CARTESIAN_POINT('',(107.468075,-100.603636,1.585)); +#170623 = DIRECTION('',(0.,0.,1.)); +#170624 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170625 = ORIENTED_EDGE('',*,*,#170626,.T.); +#170626 = EDGE_CURVE('',#170618,#170627,#170629,.T.); +#170627 = VERTEX_POINT('',#170628); +#170628 = CARTESIAN_POINT('',(107.227364,-100.422919,1.585)); +#170629 = LINE('',#170630,#170631); +#170630 = CARTESIAN_POINT('',(107.515611,-100.422919,1.585)); +#170631 = VECTOR('',#170632,1.); +#170632 = DIRECTION('',(-1.,0.,0.)); +#170633 = ORIENTED_EDGE('',*,*,#170634,.T.); +#170634 = EDGE_CURVE('',#170627,#170635,#170637,.T.); +#170635 = VERTEX_POINT('',#170636); +#170636 = CARTESIAN_POINT('',(107.227364,-100.796728,1.585)); +#170637 = LINE('',#170638,#170639); +#170638 = CARTESIAN_POINT('',(107.227364,-100.422919,1.585)); +#170639 = VECTOR('',#170640,1.); +#170640 = DIRECTION('',(0.,-1.,0.)); +#170641 = ORIENTED_EDGE('',*,*,#170642,.T.); +#170642 = EDGE_CURVE('',#170635,#170643,#170645,.T.); +#170643 = VERTEX_POINT('',#170644); +#170644 = CARTESIAN_POINT('',(107.515611,-100.796728,1.585)); +#170645 = LINE('',#170646,#170647); +#170646 = CARTESIAN_POINT('',(107.227364,-100.796728,1.585)); +#170647 = VECTOR('',#170648,1.); +#170648 = DIRECTION('',(1.,0.,0.)); +#170649 = ORIENTED_EDGE('',*,*,#170650,.T.); +#170650 = EDGE_CURVE('',#170643,#170651,#170653,.T.); +#170651 = VERTEX_POINT('',#170652); +#170652 = CARTESIAN_POINT('',(107.648792,-100.663547,1.585)); +#170653 = CIRCLE('',#170654,0.18686440374); +#170654 = AXIS2_PLACEMENT_3D('',#170655,#170656,#170657); +#170655 = CARTESIAN_POINT('',(107.468075,-100.616011,1.585)); +#170656 = DIRECTION('',(0.,0.,1.)); +#170657 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170658 = ORIENTED_EDGE('',*,*,#170659,.T.); +#170659 = EDGE_CURVE('',#170651,#170616,#170660,.T.); +#170660 = LINE('',#170661,#170662); +#170661 = CARTESIAN_POINT('',(107.648792,-100.663547,1.585)); +#170662 = VECTOR('',#170663,1.); +#170663 = DIRECTION('',(0.,1.,0.)); +#170664 = PLANE('',#170665); +#170665 = AXIS2_PLACEMENT_3D('',#170666,#170667,#170668); +#170666 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170667 = DIRECTION('',(0.,0.,1.)); +#170668 = DIRECTION('',(1.,0.,-0.)); +#170669 = SHELL_BASED_SURFACE_MODEL('',(#170670)); +#170670 = OPEN_SHELL('',(#170671)); +#170671 = ADVANCED_FACE('',(#170672,#170783),#170835,.T.); +#170672 = FACE_BOUND('',#170673,.F.); +#170673 = EDGE_LOOP('',(#170674,#170685,#170693,#170702,#170710,#170719, + #170727,#170735,#170744,#170752,#170760,#170768,#170777)); +#170674 = ORIENTED_EDGE('',*,*,#170675,.T.); +#170675 = EDGE_CURVE('',#170676,#170678,#170680,.T.); +#170676 = VERTEX_POINT('',#170677); +#170677 = CARTESIAN_POINT('',(111.078805,-100.333287,1.585)); +#170678 = VERTEX_POINT('',#170679); +#170679 = CARTESIAN_POINT('',(111.152364,-100.272919,1.585)); +#170680 = CIRCLE('',#170681,7.500074938983E-02); +#170681 = AXIS2_PLACEMENT_3D('',#170682,#170683,#170684); +#170682 = CARTESIAN_POINT('',(111.15236446611,-100.3479197493,1.585)); +#170683 = DIRECTION('',(0.,0.,-1.)); +#170684 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170685 = ORIENTED_EDGE('',*,*,#170686,.T.); +#170686 = EDGE_CURVE('',#170678,#170687,#170689,.T.); +#170687 = VERTEX_POINT('',#170688); +#170688 = CARTESIAN_POINT('',(111.547948,-100.27436,1.585)); +#170689 = LINE('',#170690,#170691); +#170690 = CARTESIAN_POINT('',(111.152364,-100.272919,1.585)); +#170691 = VECTOR('',#170692,1.); +#170692 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170693 = ORIENTED_EDGE('',*,*,#170694,.T.); +#170694 = EDGE_CURVE('',#170687,#170695,#170697,.T.); +#170695 = VERTEX_POINT('',#170696); +#170696 = CARTESIAN_POINT('',(111.797351,-100.523763,1.585)); +#170697 = CIRCLE('',#170698,0.347870264855); +#170698 = AXIS2_PLACEMENT_3D('',#170699,#170700,#170701); +#170699 = CARTESIAN_POINT('',(111.46062026502,-100.6110907349,1.585)); +#170700 = DIRECTION('',(0.,0.,-1.)); +#170701 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170702 = ORIENTED_EDGE('',*,*,#170703,.T.); +#170703 = EDGE_CURVE('',#170695,#170704,#170706,.T.); +#170704 = VERTEX_POINT('',#170705); +#170705 = CARTESIAN_POINT('',(111.796129,-100.701062,1.585)); +#170706 = LINE('',#170707,#170708); +#170707 = CARTESIAN_POINT('',(111.797351,-100.523763,1.585)); +#170708 = VECTOR('',#170709,1.); +#170709 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#170710 = ORIENTED_EDGE('',*,*,#170711,.T.); +#170711 = EDGE_CURVE('',#170704,#170712,#170714,.T.); +#170712 = VERTEX_POINT('',#170713); +#170713 = CARTESIAN_POINT('',(111.547948,-100.945287,1.585)); +#170714 = CIRCLE('',#170715,0.348632345848); +#170715 = AXIS2_PLACEMENT_3D('',#170716,#170717,#170718); +#170716 = CARTESIAN_POINT('',(111.46017919403,-100.6078834593,1.585)); +#170717 = DIRECTION('',(0.,0.,-1.)); +#170718 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170719 = ORIENTED_EDGE('',*,*,#170720,.T.); +#170720 = EDGE_CURVE('',#170712,#170721,#170723,.T.); +#170721 = VERTEX_POINT('',#170722); +#170722 = CARTESIAN_POINT('',(111.534431,-100.946618,1.585)); +#170723 = LINE('',#170724,#170725); +#170724 = CARTESIAN_POINT('',(111.547948,-100.945287,1.585)); +#170725 = VECTOR('',#170726,1.); +#170726 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170727 = ORIENTED_EDGE('',*,*,#170728,.T.); +#170728 = EDGE_CURVE('',#170721,#170729,#170731,.T.); +#170729 = VERTEX_POINT('',#170730); +#170730 = CARTESIAN_POINT('',(111.792445,-101.317723,1.585)); +#170731 = LINE('',#170732,#170733); +#170732 = CARTESIAN_POINT('',(111.534431,-100.946618,1.585)); +#170733 = VECTOR('',#170734,1.); +#170734 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170735 = ORIENTED_EDGE('',*,*,#170736,.T.); +#170736 = EDGE_CURVE('',#170729,#170737,#170739,.T.); +#170737 = VERTEX_POINT('',#170738); +#170738 = CARTESIAN_POINT('',(111.66235,-101.390929,1.585)); +#170739 = CIRCLE('',#170740,7.500005951702E-02); +#170740 = AXIS2_PLACEMENT_3D('',#170741,#170742,#170743); +#170741 = CARTESIAN_POINT('',(111.72379206294,-101.3479187473,1.585)); +#170742 = DIRECTION('',(0.,0.,-1.)); +#170743 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170744 = ORIENTED_EDGE('',*,*,#170745,.T.); +#170745 = EDGE_CURVE('',#170737,#170746,#170748,.T.); +#170746 = VERTEX_POINT('',#170747); +#170747 = CARTESIAN_POINT('',(111.35141,-100.946728,1.585)); +#170748 = LINE('',#170749,#170750); +#170749 = CARTESIAN_POINT('',(111.66235,-101.390929,1.585)); +#170750 = VECTOR('',#170751,1.); +#170751 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170752 = ORIENTED_EDGE('',*,*,#170753,.T.); +#170753 = EDGE_CURVE('',#170746,#170754,#170756,.T.); +#170754 = VERTEX_POINT('',#170755); +#170755 = CARTESIAN_POINT('',(111.227364,-100.946728,1.585)); +#170756 = LINE('',#170757,#170758); +#170757 = CARTESIAN_POINT('',(111.35141,-100.946728,1.585)); +#170758 = VECTOR('',#170759,1.); +#170759 = DIRECTION('',(-1.,0.,0.)); +#170760 = ORIENTED_EDGE('',*,*,#170761,.T.); +#170761 = EDGE_CURVE('',#170754,#170762,#170764,.T.); +#170762 = VERTEX_POINT('',#170763); +#170763 = CARTESIAN_POINT('',(111.225923,-101.362551,1.585)); +#170764 = LINE('',#170765,#170766); +#170765 = CARTESIAN_POINT('',(111.227364,-100.946728,1.585)); +#170766 = VECTOR('',#170767,1.); +#170767 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170768 = ORIENTED_EDGE('',*,*,#170769,.T.); +#170769 = EDGE_CURVE('',#170762,#170770,#170772,.T.); +#170770 = VERTEX_POINT('',#170771); +#170771 = CARTESIAN_POINT('',(111.077364,-101.347919,1.585)); +#170772 = CIRCLE('',#170773,7.500006711463E-02); +#170773 = AXIS2_PLACEMENT_3D('',#170774,#170775,#170776); +#170774 = CARTESIAN_POINT('',(111.15236406711,-101.3479190671,1.585)); +#170775 = DIRECTION('',(-0.,0.,-1.)); +#170776 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170777 = ORIENTED_EDGE('',*,*,#170778,.T.); +#170778 = EDGE_CURVE('',#170770,#170676,#170779,.T.); +#170779 = LINE('',#170780,#170781); +#170780 = CARTESIAN_POINT('',(111.077364,-101.347919,1.585)); +#170781 = VECTOR('',#170782,1.); +#170782 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170783 = FACE_BOUND('',#170784,.F.); +#170784 = EDGE_LOOP('',(#170785,#170796,#170804,#170812,#170820,#170829) + ); +#170785 = ORIENTED_EDGE('',*,*,#170786,.T.); +#170786 = EDGE_CURVE('',#170787,#170789,#170791,.T.); +#170787 = VERTEX_POINT('',#170788); +#170788 = CARTESIAN_POINT('',(111.648792,-100.5561,1.585)); +#170789 = VERTEX_POINT('',#170790); +#170790 = CARTESIAN_POINT('',(111.515611,-100.422919,1.585)); +#170791 = CIRCLE('',#170792,0.18686440374); +#170792 = AXIS2_PLACEMENT_3D('',#170793,#170794,#170795); +#170793 = CARTESIAN_POINT('',(111.468075,-100.603636,1.585)); +#170794 = DIRECTION('',(0.,0.,1.)); +#170795 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170796 = ORIENTED_EDGE('',*,*,#170797,.T.); +#170797 = EDGE_CURVE('',#170789,#170798,#170800,.T.); +#170798 = VERTEX_POINT('',#170799); +#170799 = CARTESIAN_POINT('',(111.227364,-100.422919,1.585)); +#170800 = LINE('',#170801,#170802); +#170801 = CARTESIAN_POINT('',(111.515611,-100.422919,1.585)); +#170802 = VECTOR('',#170803,1.); +#170803 = DIRECTION('',(-1.,0.,0.)); +#170804 = ORIENTED_EDGE('',*,*,#170805,.T.); +#170805 = EDGE_CURVE('',#170798,#170806,#170808,.T.); +#170806 = VERTEX_POINT('',#170807); +#170807 = CARTESIAN_POINT('',(111.227364,-100.796728,1.585)); +#170808 = LINE('',#170809,#170810); +#170809 = CARTESIAN_POINT('',(111.227364,-100.422919,1.585)); +#170810 = VECTOR('',#170811,1.); +#170811 = DIRECTION('',(0.,-1.,0.)); +#170812 = ORIENTED_EDGE('',*,*,#170813,.T.); +#170813 = EDGE_CURVE('',#170806,#170814,#170816,.T.); +#170814 = VERTEX_POINT('',#170815); +#170815 = CARTESIAN_POINT('',(111.515611,-100.796728,1.585)); +#170816 = LINE('',#170817,#170818); +#170817 = CARTESIAN_POINT('',(111.227364,-100.796728,1.585)); +#170818 = VECTOR('',#170819,1.); +#170819 = DIRECTION('',(1.,0.,0.)); +#170820 = ORIENTED_EDGE('',*,*,#170821,.T.); +#170821 = EDGE_CURVE('',#170814,#170822,#170824,.T.); +#170822 = VERTEX_POINT('',#170823); +#170823 = CARTESIAN_POINT('',(111.648792,-100.663547,1.585)); +#170824 = CIRCLE('',#170825,0.18686440374); +#170825 = AXIS2_PLACEMENT_3D('',#170826,#170827,#170828); +#170826 = CARTESIAN_POINT('',(111.468075,-100.616011,1.585)); +#170827 = DIRECTION('',(0.,0.,1.)); +#170828 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170829 = ORIENTED_EDGE('',*,*,#170830,.T.); +#170830 = EDGE_CURVE('',#170822,#170787,#170831,.T.); +#170831 = LINE('',#170832,#170833); +#170832 = CARTESIAN_POINT('',(111.648792,-100.663547,1.585)); +#170833 = VECTOR('',#170834,1.); +#170834 = DIRECTION('',(0.,1.,0.)); +#170835 = PLANE('',#170836); +#170836 = AXIS2_PLACEMENT_3D('',#170837,#170838,#170839); +#170837 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170838 = DIRECTION('',(0.,0.,1.)); +#170839 = DIRECTION('',(1.,0.,-0.)); +#170840 = SHELL_BASED_SURFACE_MODEL('',(#170841)); +#170841 = OPEN_SHELL('',(#170842)); +#170842 = ADVANCED_FACE('',(#170843,#170954),#171006,.T.); +#170843 = FACE_BOUND('',#170844,.F.); +#170844 = EDGE_LOOP('',(#170845,#170856,#170864,#170873,#170881,#170890, + #170898,#170906,#170915,#170923,#170931,#170939,#170948)); +#170845 = ORIENTED_EDGE('',*,*,#170846,.T.); +#170846 = EDGE_CURVE('',#170847,#170849,#170851,.T.); +#170847 = VERTEX_POINT('',#170848); +#170848 = CARTESIAN_POINT('',(178.228805,-100.333287,1.585)); +#170849 = VERTEX_POINT('',#170850); +#170850 = CARTESIAN_POINT('',(178.302364,-100.272919,1.585)); +#170851 = CIRCLE('',#170852,7.500074938989E-02); +#170852 = AXIS2_PLACEMENT_3D('',#170853,#170854,#170855); +#170853 = CARTESIAN_POINT('',(178.30236446611,-100.3479197493,1.585)); +#170854 = DIRECTION('',(0.,0.,-1.)); +#170855 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#170856 = ORIENTED_EDGE('',*,*,#170857,.T.); +#170857 = EDGE_CURVE('',#170849,#170858,#170860,.T.); +#170858 = VERTEX_POINT('',#170859); +#170859 = CARTESIAN_POINT('',(178.697948,-100.27436,1.585)); +#170860 = LINE('',#170861,#170862); +#170861 = CARTESIAN_POINT('',(178.302364,-100.272919,1.585)); +#170862 = VECTOR('',#170863,1.); +#170863 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#170864 = ORIENTED_EDGE('',*,*,#170865,.T.); +#170865 = EDGE_CURVE('',#170858,#170866,#170868,.T.); +#170866 = VERTEX_POINT('',#170867); +#170867 = CARTESIAN_POINT('',(178.947351,-100.523763,1.585)); +#170868 = CIRCLE('',#170869,0.347870264855); +#170869 = AXIS2_PLACEMENT_3D('',#170870,#170871,#170872); +#170870 = CARTESIAN_POINT('',(178.61062026502,-100.6110907349,1.585)); +#170871 = DIRECTION('',(0.,0.,-1.)); +#170872 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170873 = ORIENTED_EDGE('',*,*,#170874,.T.); +#170874 = EDGE_CURVE('',#170866,#170875,#170877,.T.); +#170875 = VERTEX_POINT('',#170876); +#170876 = CARTESIAN_POINT('',(178.946129,-100.701062,1.585)); +#170877 = LINE('',#170878,#170879); +#170878 = CARTESIAN_POINT('',(178.947351,-100.523763,1.585)); +#170879 = VECTOR('',#170880,1.); +#170880 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#170881 = ORIENTED_EDGE('',*,*,#170882,.T.); +#170882 = EDGE_CURVE('',#170875,#170883,#170885,.T.); +#170883 = VERTEX_POINT('',#170884); +#170884 = CARTESIAN_POINT('',(178.697948,-100.945287,1.585)); +#170885 = CIRCLE('',#170886,0.348632345849); +#170886 = AXIS2_PLACEMENT_3D('',#170887,#170888,#170889); +#170887 = CARTESIAN_POINT('',(178.61017919403,-100.6078834593,1.585)); +#170888 = DIRECTION('',(0.,0.,-1.)); +#170889 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170890 = ORIENTED_EDGE('',*,*,#170891,.T.); +#170891 = EDGE_CURVE('',#170883,#170892,#170894,.T.); +#170892 = VERTEX_POINT('',#170893); +#170893 = CARTESIAN_POINT('',(178.684431,-100.946618,1.585)); +#170894 = LINE('',#170895,#170896); +#170895 = CARTESIAN_POINT('',(178.697948,-100.945287,1.585)); +#170896 = VECTOR('',#170897,1.); +#170897 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170898 = ORIENTED_EDGE('',*,*,#170899,.T.); +#170899 = EDGE_CURVE('',#170892,#170900,#170902,.T.); +#170900 = VERTEX_POINT('',#170901); +#170901 = CARTESIAN_POINT('',(178.942445,-101.317723,1.585)); +#170902 = LINE('',#170903,#170904); +#170903 = CARTESIAN_POINT('',(178.684431,-100.946618,1.585)); +#170904 = VECTOR('',#170905,1.); +#170905 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170906 = ORIENTED_EDGE('',*,*,#170907,.T.); +#170907 = EDGE_CURVE('',#170900,#170908,#170910,.T.); +#170908 = VERTEX_POINT('',#170909); +#170909 = CARTESIAN_POINT('',(178.81235,-101.390929,1.585)); +#170910 = CIRCLE('',#170911,7.500005951702E-02); +#170911 = AXIS2_PLACEMENT_3D('',#170912,#170913,#170914); +#170912 = CARTESIAN_POINT('',(178.87379206294,-101.3479187473,1.585)); +#170913 = DIRECTION('',(0.,0.,-1.)); +#170914 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170915 = ORIENTED_EDGE('',*,*,#170916,.T.); +#170916 = EDGE_CURVE('',#170908,#170917,#170919,.T.); +#170917 = VERTEX_POINT('',#170918); +#170918 = CARTESIAN_POINT('',(178.50141,-100.946728,1.585)); +#170919 = LINE('',#170920,#170921); +#170920 = CARTESIAN_POINT('',(178.81235,-101.390929,1.585)); +#170921 = VECTOR('',#170922,1.); +#170922 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170923 = ORIENTED_EDGE('',*,*,#170924,.T.); +#170924 = EDGE_CURVE('',#170917,#170925,#170927,.T.); +#170925 = VERTEX_POINT('',#170926); +#170926 = CARTESIAN_POINT('',(178.377364,-100.946728,1.585)); +#170927 = LINE('',#170928,#170929); +#170928 = CARTESIAN_POINT('',(178.50141,-100.946728,1.585)); +#170929 = VECTOR('',#170930,1.); +#170930 = DIRECTION('',(-1.,0.,0.)); +#170931 = ORIENTED_EDGE('',*,*,#170932,.T.); +#170932 = EDGE_CURVE('',#170925,#170933,#170935,.T.); +#170933 = VERTEX_POINT('',#170934); +#170934 = CARTESIAN_POINT('',(178.375923,-101.362551,1.585)); +#170935 = LINE('',#170936,#170937); +#170936 = CARTESIAN_POINT('',(178.377364,-100.946728,1.585)); +#170937 = VECTOR('',#170938,1.); +#170938 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170939 = ORIENTED_EDGE('',*,*,#170940,.T.); +#170940 = EDGE_CURVE('',#170933,#170941,#170943,.T.); +#170941 = VERTEX_POINT('',#170942); +#170942 = CARTESIAN_POINT('',(178.227364,-101.347919,1.585)); +#170943 = CIRCLE('',#170944,7.500006711464E-02); +#170944 = AXIS2_PLACEMENT_3D('',#170945,#170946,#170947); +#170945 = CARTESIAN_POINT('',(178.30236406711,-101.3479190671,1.585)); +#170946 = DIRECTION('',(-0.,0.,-1.)); +#170947 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170948 = ORIENTED_EDGE('',*,*,#170949,.T.); +#170949 = EDGE_CURVE('',#170941,#170847,#170950,.T.); +#170950 = LINE('',#170951,#170952); +#170951 = CARTESIAN_POINT('',(178.227364,-101.347919,1.585)); +#170952 = VECTOR('',#170953,1.); +#170953 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170954 = FACE_BOUND('',#170955,.F.); +#170955 = EDGE_LOOP('',(#170956,#170967,#170975,#170983,#170991,#171000) + ); +#170956 = ORIENTED_EDGE('',*,*,#170957,.T.); +#170957 = EDGE_CURVE('',#170958,#170960,#170962,.T.); +#170958 = VERTEX_POINT('',#170959); +#170959 = CARTESIAN_POINT('',(178.798792,-100.5561,1.585)); +#170960 = VERTEX_POINT('',#170961); +#170961 = CARTESIAN_POINT('',(178.665611,-100.422919,1.585)); +#170962 = CIRCLE('',#170963,0.18686440374); +#170963 = AXIS2_PLACEMENT_3D('',#170964,#170965,#170966); +#170964 = CARTESIAN_POINT('',(178.618075,-100.603636,1.585)); +#170965 = DIRECTION('',(0.,0.,1.)); +#170966 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170967 = ORIENTED_EDGE('',*,*,#170968,.T.); +#170968 = EDGE_CURVE('',#170960,#170969,#170971,.T.); +#170969 = VERTEX_POINT('',#170970); +#170970 = CARTESIAN_POINT('',(178.377364,-100.422919,1.585)); +#170971 = LINE('',#170972,#170973); +#170972 = CARTESIAN_POINT('',(178.665611,-100.422919,1.585)); +#170973 = VECTOR('',#170974,1.); +#170974 = DIRECTION('',(-1.,0.,0.)); +#170975 = ORIENTED_EDGE('',*,*,#170976,.T.); +#170976 = EDGE_CURVE('',#170969,#170977,#170979,.T.); +#170977 = VERTEX_POINT('',#170978); +#170978 = CARTESIAN_POINT('',(178.377364,-100.796728,1.585)); +#170979 = LINE('',#170980,#170981); +#170980 = CARTESIAN_POINT('',(178.377364,-100.422919,1.585)); +#170981 = VECTOR('',#170982,1.); +#170982 = DIRECTION('',(0.,-1.,0.)); +#170983 = ORIENTED_EDGE('',*,*,#170984,.T.); +#170984 = EDGE_CURVE('',#170977,#170985,#170987,.T.); +#170985 = VERTEX_POINT('',#170986); +#170986 = CARTESIAN_POINT('',(178.665611,-100.796728,1.585)); +#170987 = LINE('',#170988,#170989); +#170988 = CARTESIAN_POINT('',(178.377364,-100.796728,1.585)); +#170989 = VECTOR('',#170990,1.); +#170990 = DIRECTION('',(1.,0.,0.)); +#170991 = ORIENTED_EDGE('',*,*,#170992,.T.); +#170992 = EDGE_CURVE('',#170985,#170993,#170995,.T.); +#170993 = VERTEX_POINT('',#170994); +#170994 = CARTESIAN_POINT('',(178.798792,-100.663547,1.585)); +#170995 = CIRCLE('',#170996,0.18686440374); +#170996 = AXIS2_PLACEMENT_3D('',#170997,#170998,#170999); +#170997 = CARTESIAN_POINT('',(178.618075,-100.616011,1.585)); +#170998 = DIRECTION('',(0.,0.,1.)); +#170999 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#171000 = ORIENTED_EDGE('',*,*,#171001,.T.); +#171001 = EDGE_CURVE('',#170993,#170958,#171002,.T.); +#171002 = LINE('',#171003,#171004); +#171003 = CARTESIAN_POINT('',(178.798792,-100.663547,1.585)); +#171004 = VECTOR('',#171005,1.); +#171005 = DIRECTION('',(0.,1.,0.)); +#171006 = PLANE('',#171007); +#171007 = AXIS2_PLACEMENT_3D('',#171008,#171009,#171010); +#171008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171009 = DIRECTION('',(0.,0.,1.)); +#171010 = DIRECTION('',(1.,0.,-0.)); +#171011 = SHELL_BASED_SURFACE_MODEL('',(#171012)); +#171012 = OPEN_SHELL('',(#171013)); +#171013 = ADVANCED_FACE('',(#171014),#171299,.T.); +#171014 = FACE_BOUND('',#171015,.F.); +#171015 = EDGE_LOOP('',(#171016,#171026,#171034,#171042,#171051,#171059, + #171067,#171075,#171083,#171091,#171099,#171107,#171115,#171123, + #171131,#171139,#171147,#171155,#171163,#171172,#171180,#171189, + #171197,#171205,#171213,#171221,#171229,#171237,#171245,#171253, + #171261,#171269,#171277,#171285,#171293)); +#171016 = ORIENTED_EDGE('',*,*,#171017,.T.); +#171017 = EDGE_CURVE('',#171018,#171020,#171022,.T.); +#171018 = VERTEX_POINT('',#171019); +#171019 = CARTESIAN_POINT('',(97.452157,-100.661789,1.585)); +#171020 = VERTEX_POINT('',#171021); +#171021 = CARTESIAN_POINT('',(97.566304,-100.607693,1.585)); +#171022 = LINE('',#171023,#171024); +#171023 = CARTESIAN_POINT('',(97.452157,-100.661789,1.585)); +#171024 = VECTOR('',#171025,1.); +#171025 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#171026 = ORIENTED_EDGE('',*,*,#171027,.T.); +#171027 = EDGE_CURVE('',#171020,#171028,#171030,.T.); +#171028 = VERTEX_POINT('',#171029); +#171029 = CARTESIAN_POINT('',(97.738425,-100.607693,1.585)); +#171030 = LINE('',#171031,#171032); +#171031 = CARTESIAN_POINT('',(97.566304,-100.607693,1.585)); +#171032 = VECTOR('',#171033,1.); +#171033 = DIRECTION('',(1.,0.,0.)); +#171034 = ORIENTED_EDGE('',*,*,#171035,.T.); +#171035 = EDGE_CURVE('',#171028,#171036,#171038,.T.); +#171036 = VERTEX_POINT('',#171037); +#171037 = CARTESIAN_POINT('',(97.865015,-100.669621,1.585)); +#171038 = LINE('',#171039,#171040); +#171039 = CARTESIAN_POINT('',(97.738425,-100.607693,1.585)); +#171040 = VECTOR('',#171041,1.); +#171041 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#171042 = ORIENTED_EDGE('',*,*,#171043,.T.); +#171043 = EDGE_CURVE('',#171036,#171044,#171046,.T.); +#171044 = VERTEX_POINT('',#171045); +#171045 = CARTESIAN_POINT('',(97.78549,-100.795953,1.585)); +#171046 = CIRCLE('',#171047,7.500029440362E-02); +#171047 = AXIS2_PLACEMENT_3D('',#171048,#171049,#171050); +#171048 = CARTESIAN_POINT('',(97.819031053971,-100.7288706486,1.585)); +#171049 = DIRECTION('',(0.,0.,-1.)); +#171050 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#171051 = ORIENTED_EDGE('',*,*,#171052,.T.); +#171052 = EDGE_CURVE('',#171044,#171053,#171055,.T.); +#171053 = VERTEX_POINT('',#171054); +#171054 = CARTESIAN_POINT('',(97.706088,-100.756252,1.585)); +#171055 = LINE('',#171056,#171057); +#171056 = CARTESIAN_POINT('',(97.78549,-100.795953,1.585)); +#171057 = VECTOR('',#171058,1.); +#171058 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#171059 = ORIENTED_EDGE('',*,*,#171060,.T.); +#171060 = EDGE_CURVE('',#171053,#171061,#171063,.T.); +#171061 = VERTEX_POINT('',#171062); +#171062 = CARTESIAN_POINT('',(97.598641,-100.756252,1.585)); +#171063 = LINE('',#171064,#171065); +#171064 = CARTESIAN_POINT('',(97.706088,-100.756252,1.585)); +#171065 = VECTOR('',#171066,1.); +#171066 = DIRECTION('',(-1.,0.,0.)); +#171067 = ORIENTED_EDGE('',*,*,#171068,.T.); +#171068 = EDGE_CURVE('',#171061,#171069,#171071,.T.); +#171069 = VERTEX_POINT('',#171070); +#171070 = CARTESIAN_POINT('',(97.541599,-100.784772,1.585)); +#171071 = LINE('',#171072,#171073); +#171072 = CARTESIAN_POINT('',(97.598641,-100.756252,1.585)); +#171073 = VECTOR('',#171074,1.); +#171074 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#171075 = ORIENTED_EDGE('',*,*,#171076,.T.); +#171076 = EDGE_CURVE('',#171069,#171077,#171079,.T.); +#171077 = VERTEX_POINT('',#171078); +#171078 = CARTESIAN_POINT('',(97.513079,-100.841814,1.585)); +#171079 = LINE('',#171080,#171081); +#171080 = CARTESIAN_POINT('',(97.541599,-100.784772,1.585)); +#171081 = VECTOR('',#171082,1.); +#171082 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#171083 = ORIENTED_EDGE('',*,*,#171084,.T.); +#171084 = EDGE_CURVE('',#171077,#171085,#171087,.T.); +#171085 = VERTEX_POINT('',#171086); +#171086 = CARTESIAN_POINT('',(97.513079,-100.854023,1.585)); +#171087 = LINE('',#171088,#171089); +#171088 = CARTESIAN_POINT('',(97.513079,-100.841814,1.585)); +#171089 = VECTOR('',#171090,1.); +#171090 = DIRECTION('',(0.,-1.,0.)); +#171091 = ORIENTED_EDGE('',*,*,#171092,.T.); +#171092 = EDGE_CURVE('',#171085,#171093,#171095,.T.); +#171093 = VERTEX_POINT('',#171094); +#171094 = CARTESIAN_POINT('',(97.541599,-100.911064,1.585)); +#171095 = LINE('',#171096,#171097); +#171096 = CARTESIAN_POINT('',(97.513079,-100.854023,1.585)); +#171097 = VECTOR('',#171098,1.); +#171098 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#171099 = ORIENTED_EDGE('',*,*,#171100,.T.); +#171100 = EDGE_CURVE('',#171093,#171101,#171103,.T.); +#171101 = VERTEX_POINT('',#171102); +#171102 = CARTESIAN_POINT('',(97.598641,-100.939585,1.585)); +#171103 = LINE('',#171104,#171105); +#171104 = CARTESIAN_POINT('',(97.541599,-100.911064,1.585)); +#171105 = VECTOR('',#171106,1.); +#171106 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#171107 = ORIENTED_EDGE('',*,*,#171108,.T.); +#171108 = EDGE_CURVE('',#171101,#171109,#171111,.T.); +#171109 = VERTEX_POINT('',#171110); +#171110 = CARTESIAN_POINT('',(97.743602,-100.942248,1.585)); +#171111 = LINE('',#171112,#171113); +#171112 = CARTESIAN_POINT('',(97.598641,-100.939585,1.585)); +#171113 = VECTOR('',#171114,1.); +#171114 = DIRECTION('',(0.999831305828,-1.836735927203E-02,0.)); +#171115 = ORIENTED_EDGE('',*,*,#171116,.T.); +#171116 = EDGE_CURVE('',#171109,#171117,#171119,.T.); +#171117 = VERTEX_POINT('',#171118); +#171118 = CARTESIAN_POINT('',(97.865015,-101.002954,1.585)); +#171119 = LINE('',#171120,#171121); +#171120 = CARTESIAN_POINT('',(97.743602,-100.942248,1.585)); +#171121 = VECTOR('',#171122,1.); +#171122 = DIRECTION('',(0.894428664361,-0.447210648766,0.)); +#171123 = ORIENTED_EDGE('',*,*,#171124,.T.); +#171124 = EDGE_CURVE('',#171117,#171125,#171127,.T.); +#171125 = VERTEX_POINT('',#171126); +#171126 = CARTESIAN_POINT('',(97.886113,-101.028663,1.585)); +#171127 = LINE('',#171128,#171129); +#171128 = CARTESIAN_POINT('',(97.865015,-101.002954,1.585)); +#171129 = VECTOR('',#171130,1.); +#171130 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#171131 = ORIENTED_EDGE('',*,*,#171132,.T.); +#171132 = EDGE_CURVE('',#171125,#171133,#171135,.T.); +#171133 = VERTEX_POINT('',#171134); +#171134 = CARTESIAN_POINT('',(97.940209,-101.14281,1.585)); +#171135 = LINE('',#171136,#171137); +#171136 = CARTESIAN_POINT('',(97.886113,-101.028663,1.585)); +#171137 = VECTOR('',#171138,1.); +#171138 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#171139 = ORIENTED_EDGE('',*,*,#171140,.T.); +#171140 = EDGE_CURVE('',#171133,#171141,#171143,.T.); +#171141 = VERTEX_POINT('',#171142); +#171142 = CARTESIAN_POINT('',(97.938987,-101.22487,1.585)); +#171143 = LINE('',#171144,#171145); +#171144 = CARTESIAN_POINT('',(97.940209,-101.14281,1.585)); +#171145 = VECTOR('',#171146,1.); +#171146 = DIRECTION('',(-1.488989188842E-02,-0.999889139415,0.)); +#171147 = ORIENTED_EDGE('',*,*,#171148,.T.); +#171148 = EDGE_CURVE('',#171141,#171149,#171151,.T.); +#171149 = VERTEX_POINT('',#171150); +#171150 = CARTESIAN_POINT('',(97.878281,-101.346284,1.585)); +#171151 = LINE('',#171152,#171153); +#171152 = CARTESIAN_POINT('',(97.938987,-101.22487,1.585)); +#171153 = VECTOR('',#171154,1.); +#171154 = DIRECTION('',(-0.447207702067,-0.894430137692,0.)); +#171155 = ORIENTED_EDGE('',*,*,#171156,.T.); +#171156 = EDGE_CURVE('',#171149,#171157,#171159,.T.); +#171157 = VERTEX_POINT('',#171158); +#171158 = CARTESIAN_POINT('',(97.852572,-101.367382,1.585)); +#171159 = LINE('',#171160,#171161); +#171160 = CARTESIAN_POINT('',(97.878281,-101.346284,1.585)); +#171161 = VECTOR('',#171162,1.); +#171162 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#171163 = ORIENTED_EDGE('',*,*,#171164,.T.); +#171164 = EDGE_CURVE('',#171157,#171165,#171167,.T.); +#171165 = VERTEX_POINT('',#171166); +#171166 = CARTESIAN_POINT('',(97.392095,-101.35955,1.585)); +#171167 = CIRCLE('',#171168,0.396588066051); +#171168 = AXIS2_PLACEMENT_3D('',#171169,#171170,#171171); +#171169 = CARTESIAN_POINT('',(97.62782453893,-101.04062418,1.585)); +#171170 = DIRECTION('',(-0.,0.,-1.)); +#171171 = DIRECTION('',(0.566702531691,-0.82392247243,-0.)); +#171172 = ORIENTED_EDGE('',*,*,#171173,.T.); +#171173 = EDGE_CURVE('',#171165,#171174,#171176,.T.); +#171174 = VERTEX_POINT('',#171175); +#171175 = CARTESIAN_POINT('',(97.372922,-101.337442,1.585)); +#171176 = LINE('',#171177,#171178); +#171177 = CARTESIAN_POINT('',(97.392095,-101.35955,1.585)); +#171178 = VECTOR('',#171179,1.); +#171179 = DIRECTION('',(-0.655178986933,0.755473689205,0.)); +#171180 = ORIENTED_EDGE('',*,*,#171181,.T.); +#171181 = EDGE_CURVE('',#171174,#171182,#171184,.T.); +#171182 = VERTEX_POINT('',#171183); +#171183 = CARTESIAN_POINT('',(97.47162,-101.233218,1.585)); +#171184 = CIRCLE('',#171185,7.499954050662E-02); +#171185 = AXIS2_PLACEMENT_3D('',#171186,#171187,#171188); +#171186 = CARTESIAN_POINT('',(97.438078288962,-101.3002991799,1.585)); +#171187 = DIRECTION('',(0.,0.,-1.)); +#171188 = DIRECTION('',(-0.868755841989,-0.495240635459,-0.)); +#171189 = ORIENTED_EDGE('',*,*,#171190,.T.); +#171190 = EDGE_CURVE('',#171182,#171191,#171193,.T.); +#171191 = VERTEX_POINT('',#171192); +#171192 = CARTESIAN_POINT('',(97.551022,-101.272919,1.585)); +#171193 = LINE('',#171194,#171195); +#171194 = CARTESIAN_POINT('',(97.47162,-101.233218,1.585)); +#171195 = VECTOR('',#171196,1.); +#171196 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#171197 = ORIENTED_EDGE('',*,*,#171198,.T.); +#171198 = EDGE_CURVE('',#171191,#171199,#171201,.T.); +#171199 = VERTEX_POINT('',#171200); +#171200 = CARTESIAN_POINT('',(97.706088,-101.272919,1.585)); +#171201 = LINE('',#171202,#171203); +#171202 = CARTESIAN_POINT('',(97.551022,-101.272919,1.585)); +#171203 = VECTOR('',#171204,1.); +#171204 = DIRECTION('',(1.,0.,0.)); +#171205 = ORIENTED_EDGE('',*,*,#171206,.T.); +#171206 = EDGE_CURVE('',#171199,#171207,#171209,.T.); +#171207 = VERTEX_POINT('',#171208); +#171208 = CARTESIAN_POINT('',(97.763129,-101.244398,1.585)); +#171209 = LINE('',#171210,#171211); +#171210 = CARTESIAN_POINT('',(97.706088,-101.272919,1.585)); +#171211 = VECTOR('',#171212,1.); +#171212 = DIRECTION('',(0.894424054904,0.447219867637,0.)); +#171213 = ORIENTED_EDGE('',*,*,#171214,.T.); +#171214 = EDGE_CURVE('',#171207,#171215,#171217,.T.); +#171215 = VERTEX_POINT('',#171216); +#171216 = CARTESIAN_POINT('',(97.79165,-101.187356,1.585)); +#171217 = LINE('',#171218,#171219); +#171218 = CARTESIAN_POINT('',(97.763129,-101.244398,1.585)); +#171219 = VECTOR('',#171220,1.); +#171220 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#171221 = ORIENTED_EDGE('',*,*,#171222,.T.); +#171222 = EDGE_CURVE('',#171215,#171223,#171225,.T.); +#171223 = VERTEX_POINT('',#171224); +#171224 = CARTESIAN_POINT('',(97.79165,-101.175147,1.585)); +#171225 = LINE('',#171226,#171227); +#171226 = CARTESIAN_POINT('',(97.79165,-101.187356,1.585)); +#171227 = VECTOR('',#171228,1.); +#171228 = DIRECTION('',(0.,1.,0.)); +#171229 = ORIENTED_EDGE('',*,*,#171230,.T.); +#171230 = EDGE_CURVE('',#171223,#171231,#171233,.T.); +#171231 = VERTEX_POINT('',#171232); +#171232 = CARTESIAN_POINT('',(97.763129,-101.118105,1.585)); +#171233 = LINE('',#171234,#171235); +#171234 = CARTESIAN_POINT('',(97.79165,-101.175147,1.585)); +#171235 = VECTOR('',#171236,1.); +#171236 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#171237 = ORIENTED_EDGE('',*,*,#171238,.T.); +#171238 = EDGE_CURVE('',#171231,#171239,#171241,.T.); +#171239 = VERTEX_POINT('',#171240); +#171240 = CARTESIAN_POINT('',(97.706088,-101.089585,1.585)); +#171241 = LINE('',#171242,#171243); +#171242 = CARTESIAN_POINT('',(97.763129,-101.118105,1.585)); +#171243 = VECTOR('',#171244,1.); +#171244 = DIRECTION('',(-0.894430327074,0.447207323296,0.)); +#171245 = ORIENTED_EDGE('',*,*,#171246,.T.); +#171246 = EDGE_CURVE('',#171239,#171247,#171249,.T.); +#171247 = VERTEX_POINT('',#171248); +#171248 = CARTESIAN_POINT('',(97.561126,-101.086922,1.585)); +#171249 = LINE('',#171250,#171251); +#171250 = CARTESIAN_POINT('',(97.706088,-101.089585,1.585)); +#171251 = VECTOR('',#171252,1.); +#171252 = DIRECTION('',(-0.999831308155,1.836723261002E-02,0.)); +#171253 = ORIENTED_EDGE('',*,*,#171254,.T.); +#171254 = EDGE_CURVE('',#171247,#171255,#171257,.T.); +#171255 = VERTEX_POINT('',#171256); +#171256 = CARTESIAN_POINT('',(97.439714,-101.026216,1.585)); +#171257 = LINE('',#171258,#171259); +#171258 = CARTESIAN_POINT('',(97.561126,-101.086922,1.585)); +#171259 = VECTOR('',#171260,1.); +#171260 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#171261 = ORIENTED_EDGE('',*,*,#171262,.T.); +#171262 = EDGE_CURVE('',#171255,#171263,#171265,.T.); +#171263 = VERTEX_POINT('',#171264); +#171264 = CARTESIAN_POINT('',(97.418616,-101.000507,1.585)); +#171265 = LINE('',#171266,#171267); +#171266 = CARTESIAN_POINT('',(97.439714,-101.026216,1.585)); +#171267 = VECTOR('',#171268,1.); +#171268 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#171269 = ORIENTED_EDGE('',*,*,#171270,.T.); +#171270 = EDGE_CURVE('',#171263,#171271,#171273,.T.); +#171271 = VERTEX_POINT('',#171272); +#171272 = CARTESIAN_POINT('',(97.36452,-100.88636,1.585)); +#171273 = LINE('',#171274,#171275); +#171274 = CARTESIAN_POINT('',(97.418616,-101.000507,1.585)); +#171275 = VECTOR('',#171276,1.); +#171276 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#171277 = ORIENTED_EDGE('',*,*,#171278,.T.); +#171278 = EDGE_CURVE('',#171271,#171279,#171281,.T.); +#171279 = VERTEX_POINT('',#171280); +#171280 = CARTESIAN_POINT('',(97.365742,-100.8043,1.585)); +#171281 = LINE('',#171282,#171283); +#171282 = CARTESIAN_POINT('',(97.36452,-100.88636,1.585)); +#171283 = VECTOR('',#171284,1.); +#171284 = DIRECTION('',(1.488989188842E-02,0.999889139415,0.)); +#171285 = ORIENTED_EDGE('',*,*,#171286,.T.); +#171286 = EDGE_CURVE('',#171279,#171287,#171289,.T.); +#171287 = VERTEX_POINT('',#171288); +#171288 = CARTESIAN_POINT('',(97.426448,-100.682887,1.585)); +#171289 = LINE('',#171290,#171291); +#171290 = CARTESIAN_POINT('',(97.365742,-100.8043,1.585)); +#171291 = VECTOR('',#171292,1.); +#171292 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#171293 = ORIENTED_EDGE('',*,*,#171294,.T.); +#171294 = EDGE_CURVE('',#171287,#171018,#171295,.T.); +#171295 = LINE('',#171296,#171297); +#171296 = CARTESIAN_POINT('',(97.426448,-100.682887,1.585)); +#171297 = VECTOR('',#171298,1.); +#171298 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#171299 = PLANE('',#171300); +#171300 = AXIS2_PLACEMENT_3D('',#171301,#171302,#171303); +#171301 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171302 = DIRECTION('',(0.,0.,1.)); +#171303 = DIRECTION('',(1.,0.,-0.)); +#171304 = SHELL_BASED_SURFACE_MODEL('',(#171305)); +#171305 = OPEN_SHELL('',(#171306)); +#171306 = ADVANCED_FACE('',(#171307),#171502,.T.); +#171307 = FACE_BOUND('',#171308,.F.); +#171308 = EDGE_LOOP('',(#171309,#171320,#171328,#171337,#171345,#171353, + #171361,#171369,#171378,#171386,#171395,#171403,#171411,#171419, + #171428,#171436,#171445,#171453,#171462,#171470,#171479,#171487, + #171496)); +#171309 = ORIENTED_EDGE('',*,*,#171310,.T.); +#171310 = EDGE_CURVE('',#171311,#171313,#171315,.T.); +#171311 = VERTEX_POINT('',#171312); +#171312 = CARTESIAN_POINT('',(104.580626,-100.32604,1.585)); +#171313 = VERTEX_POINT('',#171314); +#171314 = CARTESIAN_POINT('',(104.652364,-100.272919,1.585)); +#171315 = CIRCLE('',#171316,7.50033610077E-02); +#171316 = AXIS2_PLACEMENT_3D('',#171317,#171318,#171319); +#171317 = CARTESIAN_POINT('',(104.6523662707,-100.3479223609,1.585)); +#171318 = DIRECTION('',(0.,0.,-1.)); +#171319 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#171320 = ORIENTED_EDGE('',*,*,#171321,.T.); +#171321 = EDGE_CURVE('',#171313,#171322,#171324,.T.); +#171322 = VERTEX_POINT('',#171323); +#171323 = CARTESIAN_POINT('',(105.143186,-100.27436,1.585)); +#171324 = LINE('',#171325,#171326); +#171325 = CARTESIAN_POINT('',(104.652364,-100.272919,1.585)); +#171326 = VECTOR('',#171327,1.); +#171327 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#171328 = ORIENTED_EDGE('',*,*,#171329,.T.); +#171329 = EDGE_CURVE('',#171322,#171330,#171332,.T.); +#171330 = VERTEX_POINT('',#171331); +#171331 = CARTESIAN_POINT('',(105.128554,-100.422919,1.585)); +#171332 = CIRCLE('',#171333,7.500006711464E-02); +#171333 = AXIS2_PLACEMENT_3D('',#171334,#171335,#171336); +#171334 = CARTESIAN_POINT('',(105.12855406711,-100.3479189328,1.585)); +#171335 = DIRECTION('',(0.,0.,-1.)); +#171336 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#171337 = ORIENTED_EDGE('',*,*,#171338,.T.); +#171338 = EDGE_CURVE('',#171330,#171339,#171341,.T.); +#171339 = VERTEX_POINT('',#171340); +#171340 = CARTESIAN_POINT('',(104.720238,-100.422919,1.585)); +#171341 = LINE('',#171342,#171343); +#171342 = CARTESIAN_POINT('',(105.128554,-100.422919,1.585)); +#171343 = VECTOR('',#171344,1.); +#171344 = DIRECTION('',(-1.,0.,0.)); +#171345 = ORIENTED_EDGE('',*,*,#171346,.T.); +#171346 = EDGE_CURVE('',#171339,#171347,#171349,.T.); +#171347 = VERTEX_POINT('',#171348); +#171348 = CARTESIAN_POINT('',(104.695419,-100.671109,1.585)); +#171349 = LINE('',#171350,#171351); +#171350 = CARTESIAN_POINT('',(104.720238,-100.422919,1.585)); +#171351 = VECTOR('',#171352,1.); +#171352 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#171353 = ORIENTED_EDGE('',*,*,#171354,.T.); +#171354 = EDGE_CURVE('',#171347,#171355,#171357,.T.); +#171355 = VERTEX_POINT('',#171356); +#171356 = CARTESIAN_POINT('',(104.73297,-100.655312,1.585)); +#171357 = LINE('',#171358,#171359); +#171358 = CARTESIAN_POINT('',(104.695419,-100.671109,1.585)); +#171359 = VECTOR('',#171360,1.); +#171360 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#171361 = ORIENTED_EDGE('',*,*,#171362,.T.); +#171362 = EDGE_CURVE('',#171355,#171363,#171365,.T.); +#171363 = VERTEX_POINT('',#171364); +#171364 = CARTESIAN_POINT('',(105.005506,-100.656534,1.585)); +#171365 = LINE('',#171366,#171367); +#171366 = CARTESIAN_POINT('',(104.73297,-100.655312,1.585)); +#171367 = VECTOR('',#171368,1.); +#171368 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#171369 = ORIENTED_EDGE('',*,*,#171370,.T.); +#171370 = EDGE_CURVE('',#171363,#171371,#171373,.T.); +#171371 = VERTEX_POINT('',#171372); +#171372 = CARTESIAN_POINT('',(105.249732,-100.904715,1.585)); +#171373 = CIRCLE('',#171374,0.348625649748); +#171374 = AXIS2_PLACEMENT_3D('',#171375,#171376,#171377); +#171375 = CARTESIAN_POINT('',(104.91233404586,-100.9924786838,1.585)); +#171376 = DIRECTION('',(0.,0.,-1.)); +#171377 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#171378 = ORIENTED_EDGE('',*,*,#171379,.T.); +#171379 = EDGE_CURVE('',#171371,#171380,#171382,.T.); +#171380 = VERTEX_POINT('',#171381); +#171381 = CARTESIAN_POINT('',(105.24851,-101.177252,1.585)); +#171382 = LINE('',#171383,#171384); +#171383 = CARTESIAN_POINT('',(105.249732,-100.904715,1.585)); +#171384 = VECTOR('',#171385,1.); +#171385 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#171386 = ORIENTED_EDGE('',*,*,#171387,.T.); +#171387 = EDGE_CURVE('',#171380,#171388,#171390,.T.); +#171388 = VERTEX_POINT('',#171389); +#171389 = CARTESIAN_POINT('',(105.000329,-101.421478,1.585)); +#171390 = CIRCLE('',#171391,0.348635327447); +#171391 = AXIS2_PLACEMENT_3D('',#171392,#171393,#171394); +#171392 = CARTESIAN_POINT('',(104.91255748129,-101.0840720841,1.585)); +#171393 = DIRECTION('',(0.,0.,-1.)); +#171394 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#171395 = ORIENTED_EDGE('',*,*,#171396,.T.); +#171396 = EDGE_CURVE('',#171388,#171397,#171399,.T.); +#171397 = VERTEX_POINT('',#171398); +#171398 = CARTESIAN_POINT('',(104.727792,-101.420256,1.585)); +#171399 = LINE('',#171400,#171401); +#171400 = CARTESIAN_POINT('',(105.000329,-101.421478,1.585)); +#171401 = VECTOR('',#171402,1.); +#171402 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#171403 = ORIENTED_EDGE('',*,*,#171404,.T.); +#171404 = EDGE_CURVE('',#171397,#171405,#171407,.T.); +#171405 = VERTEX_POINT('',#171406); +#171406 = CARTESIAN_POINT('',(104.605079,-101.35805,1.585)); +#171407 = LINE('',#171408,#171409); +#171408 = CARTESIAN_POINT('',(104.727792,-101.420256,1.585)); +#171409 = VECTOR('',#171410,1.); +#171410 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#171411 = ORIENTED_EDGE('',*,*,#171412,.T.); +#171412 = EDGE_CURVE('',#171405,#171413,#171415,.T.); +#171413 = VERTEX_POINT('',#171414); +#171414 = CARTESIAN_POINT('',(104.542384,-101.294347,1.585)); +#171415 = LINE('',#171416,#171417); +#171416 = CARTESIAN_POINT('',(104.605079,-101.35805,1.585)); +#171417 = VECTOR('',#171418,1.); +#171418 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#171419 = ORIENTED_EDGE('',*,*,#171420,.T.); +#171420 = EDGE_CURVE('',#171413,#171421,#171423,.T.); +#171421 = VERTEX_POINT('',#171422); +#171422 = CARTESIAN_POINT('',(104.657779,-101.199648,1.585)); +#171423 = CIRCLE('',#171424,7.50001266804E-02); +#171424 = AXIS2_PLACEMENT_3D('',#171425,#171426,#171427); +#171425 = CARTESIAN_POINT('',(104.60474505199,-101.2526802483,1.585)); +#171426 = DIRECTION('',(0.,0.,-1.)); +#171427 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#171428 = ORIENTED_EDGE('',*,*,#171429,.T.); +#171429 = EDGE_CURVE('',#171421,#171430,#171432,.T.); +#171430 = VERTEX_POINT('',#171431); +#171431 = CARTESIAN_POINT('',(104.696791,-101.238661,1.585)); +#171432 = LINE('',#171433,#171434); +#171433 = CARTESIAN_POINT('',(104.657779,-101.199648,1.585)); +#171434 = VECTOR('',#171435,1.); +#171435 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#171436 = ORIENTED_EDGE('',*,*,#171437,.T.); +#171437 = EDGE_CURVE('',#171430,#171438,#171440,.T.); +#171438 = VERTEX_POINT('',#171439); +#171439 = CARTESIAN_POINT('',(105.036507,-101.238661,1.585)); +#171440 = CIRCLE('',#171441,0.305620374329); +#171441 = AXIS2_PLACEMENT_3D('',#171442,#171443,#171444); +#171442 = CARTESIAN_POINT('',(104.866649,-100.98459,1.585)); +#171443 = DIRECTION('',(0.,0.,1.)); +#171444 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#171445 = ORIENTED_EDGE('',*,*,#171446,.T.); +#171446 = EDGE_CURVE('',#171438,#171447,#171449,.T.); +#171447 = VERTEX_POINT('',#171448); +#171448 = CARTESIAN_POINT('',(105.066914,-101.208253,1.585)); +#171449 = LINE('',#171450,#171451); +#171450 = CARTESIAN_POINT('',(105.036507,-101.238661,1.585)); +#171451 = VECTOR('',#171452,1.); +#171452 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#171453 = ORIENTED_EDGE('',*,*,#171454,.T.); +#171454 = EDGE_CURVE('',#171447,#171455,#171457,.T.); +#171455 = VERTEX_POINT('',#171456); +#171456 = CARTESIAN_POINT('',(105.066915,-100.868536,1.585)); +#171457 = CIRCLE('',#171458,0.305616146029); +#171458 = AXIS2_PLACEMENT_3D('',#171459,#171460,#171461); +#171459 = CARTESIAN_POINT('',(104.81284892049,-101.0383937521,1.585)); +#171460 = DIRECTION('',(0.,-0.,1.)); +#171461 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#171462 = ORIENTED_EDGE('',*,*,#171463,.T.); +#171463 = EDGE_CURVE('',#171455,#171464,#171466,.T.); +#171464 = VERTEX_POINT('',#171465); +#171465 = CARTESIAN_POINT('',(105.036508,-100.838129,1.585)); +#171466 = LINE('',#171467,#171468); +#171467 = CARTESIAN_POINT('',(105.066915,-100.868536,1.585)); +#171468 = VECTOR('',#171469,1.); +#171469 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#171470 = ORIENTED_EDGE('',*,*,#171471,.T.); +#171471 = EDGE_CURVE('',#171464,#171472,#171474,.T.); +#171472 = VERTEX_POINT('',#171473); +#171473 = CARTESIAN_POINT('',(104.696791,-100.838129,1.585)); +#171474 = CIRCLE('',#171475,0.305621483548); +#171475 = AXIS2_PLACEMENT_3D('',#171476,#171477,#171478); +#171476 = CARTESIAN_POINT('',(104.8666495,-101.092201,1.585)); +#171477 = DIRECTION('',(0.,0.,1.)); +#171478 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#171479 = ORIENTED_EDGE('',*,*,#171480,.T.); +#171480 = EDGE_CURVE('',#171472,#171481,#171483,.T.); +#171481 = VERTEX_POINT('',#171482); +#171482 = CARTESIAN_POINT('',(104.640001,-100.890306,1.585)); +#171483 = LINE('',#171484,#171485); +#171484 = CARTESIAN_POINT('',(104.696791,-100.838129,1.585)); +#171485 = VECTOR('',#171486,1.); +#171486 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#171487 = ORIENTED_EDGE('',*,*,#171488,.T.); +#171488 = EDGE_CURVE('',#171481,#171489,#171491,.T.); +#171489 = VERTEX_POINT('',#171490); +#171490 = CARTESIAN_POINT('',(104.530095,-100.831349,1.585)); +#171491 = CIRCLE('',#171492,7.500024172471E-02); +#171492 = AXIS2_PLACEMENT_3D('',#171493,#171494,#171495); +#171493 = CARTESIAN_POINT('',(104.60474497002,-100.8241089561,1.585)); +#171494 = DIRECTION('',(-0.,0.,-1.)); +#171495 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#171496 = ORIENTED_EDGE('',*,*,#171497,.T.); +#171497 = EDGE_CURVE('',#171489,#171311,#171498,.T.); +#171498 = LINE('',#171499,#171500); +#171499 = CARTESIAN_POINT('',(104.530095,-100.831349,1.585)); +#171500 = VECTOR('',#171501,1.); +#171501 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#171502 = PLANE('',#171503); +#171503 = AXIS2_PLACEMENT_3D('',#171504,#171505,#171506); +#171504 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171505 = DIRECTION('',(0.,0.,1.)); +#171506 = DIRECTION('',(1.,0.,-0.)); +#171507 = SHELL_BASED_SURFACE_MODEL('',(#171508)); +#171508 = OPEN_SHELL('',(#171509)); +#171509 = ADVANCED_FACE('',(#171510),#171705,.T.); +#171510 = FACE_BOUND('',#171511,.F.); +#171511 = EDGE_LOOP('',(#171512,#171523,#171531,#171540,#171548,#171556, + #171564,#171572,#171581,#171589,#171598,#171606,#171614,#171622, + #171631,#171639,#171648,#171656,#171665,#171673,#171682,#171690, + #171699)); +#171512 = ORIENTED_EDGE('',*,*,#171513,.T.); +#171513 = EDGE_CURVE('',#171514,#171516,#171518,.T.); +#171514 = VERTEX_POINT('',#171515); +#171515 = CARTESIAN_POINT('',(108.080626,-100.32604,1.585)); +#171516 = VERTEX_POINT('',#171517); +#171517 = CARTESIAN_POINT('',(108.152364,-100.272919,1.585)); +#171518 = CIRCLE('',#171519,7.50033610077E-02); +#171519 = AXIS2_PLACEMENT_3D('',#171520,#171521,#171522); +#171520 = CARTESIAN_POINT('',(108.1523662707,-100.3479223609,1.585)); +#171521 = DIRECTION('',(0.,0.,-1.)); +#171522 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#171523 = ORIENTED_EDGE('',*,*,#171524,.T.); +#171524 = EDGE_CURVE('',#171516,#171525,#171527,.T.); +#171525 = VERTEX_POINT('',#171526); +#171526 = CARTESIAN_POINT('',(108.643186,-100.27436,1.585)); +#171527 = LINE('',#171528,#171529); +#171528 = CARTESIAN_POINT('',(108.152364,-100.272919,1.585)); +#171529 = VECTOR('',#171530,1.); +#171530 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#171531 = ORIENTED_EDGE('',*,*,#171532,.T.); +#171532 = EDGE_CURVE('',#171525,#171533,#171535,.T.); +#171533 = VERTEX_POINT('',#171534); +#171534 = CARTESIAN_POINT('',(108.628554,-100.422919,1.585)); +#171535 = CIRCLE('',#171536,7.500006711464E-02); +#171536 = AXIS2_PLACEMENT_3D('',#171537,#171538,#171539); +#171537 = CARTESIAN_POINT('',(108.62855406711,-100.3479189328,1.585)); +#171538 = DIRECTION('',(0.,0.,-1.)); +#171539 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#171540 = ORIENTED_EDGE('',*,*,#171541,.T.); +#171541 = EDGE_CURVE('',#171533,#171542,#171544,.T.); +#171542 = VERTEX_POINT('',#171543); +#171543 = CARTESIAN_POINT('',(108.220238,-100.422919,1.585)); +#171544 = LINE('',#171545,#171546); +#171545 = CARTESIAN_POINT('',(108.628554,-100.422919,1.585)); +#171546 = VECTOR('',#171547,1.); +#171547 = DIRECTION('',(-1.,0.,0.)); +#171548 = ORIENTED_EDGE('',*,*,#171549,.T.); +#171549 = EDGE_CURVE('',#171542,#171550,#171552,.T.); +#171550 = VERTEX_POINT('',#171551); +#171551 = CARTESIAN_POINT('',(108.195419,-100.671109,1.585)); +#171552 = LINE('',#171553,#171554); +#171553 = CARTESIAN_POINT('',(108.220238,-100.422919,1.585)); +#171554 = VECTOR('',#171555,1.); +#171555 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#171556 = ORIENTED_EDGE('',*,*,#171557,.T.); +#171557 = EDGE_CURVE('',#171550,#171558,#171560,.T.); +#171558 = VERTEX_POINT('',#171559); +#171559 = CARTESIAN_POINT('',(108.23297,-100.655312,1.585)); +#171560 = LINE('',#171561,#171562); +#171561 = CARTESIAN_POINT('',(108.195419,-100.671109,1.585)); +#171562 = VECTOR('',#171563,1.); +#171563 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#171564 = ORIENTED_EDGE('',*,*,#171565,.T.); +#171565 = EDGE_CURVE('',#171558,#171566,#171568,.T.); +#171566 = VERTEX_POINT('',#171567); +#171567 = CARTESIAN_POINT('',(108.505506,-100.656534,1.585)); +#171568 = LINE('',#171569,#171570); +#171569 = CARTESIAN_POINT('',(108.23297,-100.655312,1.585)); +#171570 = VECTOR('',#171571,1.); +#171571 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#171572 = ORIENTED_EDGE('',*,*,#171573,.T.); +#171573 = EDGE_CURVE('',#171566,#171574,#171576,.T.); +#171574 = VERTEX_POINT('',#171575); +#171575 = CARTESIAN_POINT('',(108.749732,-100.904715,1.585)); +#171576 = CIRCLE('',#171577,0.348625649748); +#171577 = AXIS2_PLACEMENT_3D('',#171578,#171579,#171580); +#171578 = CARTESIAN_POINT('',(108.41233404586,-100.9924786838,1.585)); +#171579 = DIRECTION('',(0.,0.,-1.)); +#171580 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#171581 = ORIENTED_EDGE('',*,*,#171582,.T.); +#171582 = EDGE_CURVE('',#171574,#171583,#171585,.T.); +#171583 = VERTEX_POINT('',#171584); +#171584 = CARTESIAN_POINT('',(108.74851,-101.177252,1.585)); +#171585 = LINE('',#171586,#171587); +#171586 = CARTESIAN_POINT('',(108.749732,-100.904715,1.585)); +#171587 = VECTOR('',#171588,1.); +#171588 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#171589 = ORIENTED_EDGE('',*,*,#171590,.T.); +#171590 = EDGE_CURVE('',#171583,#171591,#171593,.T.); +#171591 = VERTEX_POINT('',#171592); +#171592 = CARTESIAN_POINT('',(108.500329,-101.421478,1.585)); +#171593 = CIRCLE('',#171594,0.348635327447); +#171594 = AXIS2_PLACEMENT_3D('',#171595,#171596,#171597); +#171595 = CARTESIAN_POINT('',(108.41255748129,-101.0840720841,1.585)); +#171596 = DIRECTION('',(0.,0.,-1.)); +#171597 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#171598 = ORIENTED_EDGE('',*,*,#171599,.T.); +#171599 = EDGE_CURVE('',#171591,#171600,#171602,.T.); +#171600 = VERTEX_POINT('',#171601); +#171601 = CARTESIAN_POINT('',(108.227792,-101.420256,1.585)); +#171602 = LINE('',#171603,#171604); +#171603 = CARTESIAN_POINT('',(108.500329,-101.421478,1.585)); +#171604 = VECTOR('',#171605,1.); +#171605 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#171606 = ORIENTED_EDGE('',*,*,#171607,.T.); +#171607 = EDGE_CURVE('',#171600,#171608,#171610,.T.); +#171608 = VERTEX_POINT('',#171609); +#171609 = CARTESIAN_POINT('',(108.105079,-101.35805,1.585)); +#171610 = LINE('',#171611,#171612); +#171611 = CARTESIAN_POINT('',(108.227792,-101.420256,1.585)); +#171612 = VECTOR('',#171613,1.); +#171613 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#171614 = ORIENTED_EDGE('',*,*,#171615,.T.); +#171615 = EDGE_CURVE('',#171608,#171616,#171618,.T.); +#171616 = VERTEX_POINT('',#171617); +#171617 = CARTESIAN_POINT('',(108.042384,-101.294347,1.585)); +#171618 = LINE('',#171619,#171620); +#171619 = CARTESIAN_POINT('',(108.105079,-101.35805,1.585)); +#171620 = VECTOR('',#171621,1.); +#171621 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#171622 = ORIENTED_EDGE('',*,*,#171623,.T.); +#171623 = EDGE_CURVE('',#171616,#171624,#171626,.T.); +#171624 = VERTEX_POINT('',#171625); +#171625 = CARTESIAN_POINT('',(108.157779,-101.199648,1.585)); +#171626 = CIRCLE('',#171627,7.50001266804E-02); +#171627 = AXIS2_PLACEMENT_3D('',#171628,#171629,#171630); +#171628 = CARTESIAN_POINT('',(108.10474505199,-101.2526802483,1.585)); +#171629 = DIRECTION('',(0.,0.,-1.)); +#171630 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#171631 = ORIENTED_EDGE('',*,*,#171632,.T.); +#171632 = EDGE_CURVE('',#171624,#171633,#171635,.T.); +#171633 = VERTEX_POINT('',#171634); +#171634 = CARTESIAN_POINT('',(108.196791,-101.238661,1.585)); +#171635 = LINE('',#171636,#171637); +#171636 = CARTESIAN_POINT('',(108.157779,-101.199648,1.585)); +#171637 = VECTOR('',#171638,1.); +#171638 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#171639 = ORIENTED_EDGE('',*,*,#171640,.T.); +#171640 = EDGE_CURVE('',#171633,#171641,#171643,.T.); +#171641 = VERTEX_POINT('',#171642); +#171642 = CARTESIAN_POINT('',(108.536507,-101.238661,1.585)); +#171643 = CIRCLE('',#171644,0.305620374329); +#171644 = AXIS2_PLACEMENT_3D('',#171645,#171646,#171647); +#171645 = CARTESIAN_POINT('',(108.366649,-100.98459,1.585)); +#171646 = DIRECTION('',(0.,0.,1.)); +#171647 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#171648 = ORIENTED_EDGE('',*,*,#171649,.T.); +#171649 = EDGE_CURVE('',#171641,#171650,#171652,.T.); +#171650 = VERTEX_POINT('',#171651); +#171651 = CARTESIAN_POINT('',(108.566914,-101.208253,1.585)); +#171652 = LINE('',#171653,#171654); +#171653 = CARTESIAN_POINT('',(108.536507,-101.238661,1.585)); +#171654 = VECTOR('',#171655,1.); +#171655 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#171656 = ORIENTED_EDGE('',*,*,#171657,.T.); +#171657 = EDGE_CURVE('',#171650,#171658,#171660,.T.); +#171658 = VERTEX_POINT('',#171659); +#171659 = CARTESIAN_POINT('',(108.566915,-100.868536,1.585)); +#171660 = CIRCLE('',#171661,0.305616146029); +#171661 = AXIS2_PLACEMENT_3D('',#171662,#171663,#171664); +#171662 = CARTESIAN_POINT('',(108.31284892049,-101.0383937521,1.585)); +#171663 = DIRECTION('',(0.,-0.,1.)); +#171664 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#171665 = ORIENTED_EDGE('',*,*,#171666,.T.); +#171666 = EDGE_CURVE('',#171658,#171667,#171669,.T.); +#171667 = VERTEX_POINT('',#171668); +#171668 = CARTESIAN_POINT('',(108.536508,-100.838129,1.585)); +#171669 = LINE('',#171670,#171671); +#171670 = CARTESIAN_POINT('',(108.566915,-100.868536,1.585)); +#171671 = VECTOR('',#171672,1.); +#171672 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#171673 = ORIENTED_EDGE('',*,*,#171674,.T.); +#171674 = EDGE_CURVE('',#171667,#171675,#171677,.T.); +#171675 = VERTEX_POINT('',#171676); +#171676 = CARTESIAN_POINT('',(108.196791,-100.838129,1.585)); +#171677 = CIRCLE('',#171678,0.305621483548); +#171678 = AXIS2_PLACEMENT_3D('',#171679,#171680,#171681); +#171679 = CARTESIAN_POINT('',(108.3666495,-101.092201,1.585)); +#171680 = DIRECTION('',(0.,0.,1.)); +#171681 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#171682 = ORIENTED_EDGE('',*,*,#171683,.T.); +#171683 = EDGE_CURVE('',#171675,#171684,#171686,.T.); +#171684 = VERTEX_POINT('',#171685); +#171685 = CARTESIAN_POINT('',(108.140001,-100.890306,1.585)); +#171686 = LINE('',#171687,#171688); +#171687 = CARTESIAN_POINT('',(108.196791,-100.838129,1.585)); +#171688 = VECTOR('',#171689,1.); +#171689 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#171690 = ORIENTED_EDGE('',*,*,#171691,.T.); +#171691 = EDGE_CURVE('',#171684,#171692,#171694,.T.); +#171692 = VERTEX_POINT('',#171693); +#171693 = CARTESIAN_POINT('',(108.030095,-100.831349,1.585)); +#171694 = CIRCLE('',#171695,7.500024172471E-02); +#171695 = AXIS2_PLACEMENT_3D('',#171696,#171697,#171698); +#171696 = CARTESIAN_POINT('',(108.10474497002,-100.8241089561,1.585)); +#171697 = DIRECTION('',(-0.,0.,-1.)); +#171698 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#171699 = ORIENTED_EDGE('',*,*,#171700,.T.); +#171700 = EDGE_CURVE('',#171692,#171514,#171701,.T.); +#171701 = LINE('',#171702,#171703); +#171702 = CARTESIAN_POINT('',(108.030095,-100.831349,1.585)); +#171703 = VECTOR('',#171704,1.); +#171704 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#171705 = PLANE('',#171706); +#171706 = AXIS2_PLACEMENT_3D('',#171707,#171708,#171709); +#171707 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171708 = DIRECTION('',(0.,0.,1.)); +#171709 = DIRECTION('',(1.,0.,-0.)); +#171710 = SHELL_BASED_SURFACE_MODEL('',(#171711)); +#171711 = OPEN_SHELL('',(#171712)); +#171712 = ADVANCED_FACE('',(#171713),#171908,.T.); +#171713 = FACE_BOUND('',#171714,.F.); +#171714 = EDGE_LOOP('',(#171715,#171726,#171734,#171743,#171751,#171759, + #171767,#171775,#171784,#171792,#171801,#171809,#171817,#171825, + #171834,#171842,#171851,#171859,#171868,#171876,#171885,#171893, + #171902)); +#171715 = ORIENTED_EDGE('',*,*,#171716,.T.); +#171716 = EDGE_CURVE('',#171717,#171719,#171721,.T.); +#171717 = VERTEX_POINT('',#171718); +#171718 = CARTESIAN_POINT('',(112.080626,-100.32604,1.585)); +#171719 = VERTEX_POINT('',#171720); +#171720 = CARTESIAN_POINT('',(112.152364,-100.272919,1.585)); +#171721 = CIRCLE('',#171722,7.50033610077E-02); +#171722 = AXIS2_PLACEMENT_3D('',#171723,#171724,#171725); +#171723 = CARTESIAN_POINT('',(112.1523662707,-100.3479223609,1.585)); +#171724 = DIRECTION('',(0.,0.,-1.)); +#171725 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#171726 = ORIENTED_EDGE('',*,*,#171727,.T.); +#171727 = EDGE_CURVE('',#171719,#171728,#171730,.T.); +#171728 = VERTEX_POINT('',#171729); +#171729 = CARTESIAN_POINT('',(112.643186,-100.27436,1.585)); +#171730 = LINE('',#171731,#171732); +#171731 = CARTESIAN_POINT('',(112.152364,-100.272919,1.585)); +#171732 = VECTOR('',#171733,1.); +#171733 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#171734 = ORIENTED_EDGE('',*,*,#171735,.T.); +#171735 = EDGE_CURVE('',#171728,#171736,#171738,.T.); +#171736 = VERTEX_POINT('',#171737); +#171737 = CARTESIAN_POINT('',(112.628554,-100.422919,1.585)); +#171738 = CIRCLE('',#171739,7.500006711464E-02); +#171739 = AXIS2_PLACEMENT_3D('',#171740,#171741,#171742); +#171740 = CARTESIAN_POINT('',(112.62855406711,-100.3479189328,1.585)); +#171741 = DIRECTION('',(0.,0.,-1.)); +#171742 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#171743 = ORIENTED_EDGE('',*,*,#171744,.T.); +#171744 = EDGE_CURVE('',#171736,#171745,#171747,.T.); +#171745 = VERTEX_POINT('',#171746); +#171746 = CARTESIAN_POINT('',(112.220238,-100.422919,1.585)); +#171747 = LINE('',#171748,#171749); +#171748 = CARTESIAN_POINT('',(112.628554,-100.422919,1.585)); +#171749 = VECTOR('',#171750,1.); +#171750 = DIRECTION('',(-1.,0.,0.)); +#171751 = ORIENTED_EDGE('',*,*,#171752,.T.); +#171752 = EDGE_CURVE('',#171745,#171753,#171755,.T.); +#171753 = VERTEX_POINT('',#171754); +#171754 = CARTESIAN_POINT('',(112.195419,-100.671109,1.585)); +#171755 = LINE('',#171756,#171757); +#171756 = CARTESIAN_POINT('',(112.220238,-100.422919,1.585)); +#171757 = VECTOR('',#171758,1.); +#171758 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#171759 = ORIENTED_EDGE('',*,*,#171760,.T.); +#171760 = EDGE_CURVE('',#171753,#171761,#171763,.T.); +#171761 = VERTEX_POINT('',#171762); +#171762 = CARTESIAN_POINT('',(112.23297,-100.655312,1.585)); +#171763 = LINE('',#171764,#171765); +#171764 = CARTESIAN_POINT('',(112.195419,-100.671109,1.585)); +#171765 = VECTOR('',#171766,1.); +#171766 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#171767 = ORIENTED_EDGE('',*,*,#171768,.T.); +#171768 = EDGE_CURVE('',#171761,#171769,#171771,.T.); +#171769 = VERTEX_POINT('',#171770); +#171770 = CARTESIAN_POINT('',(112.505506,-100.656534,1.585)); +#171771 = LINE('',#171772,#171773); +#171772 = CARTESIAN_POINT('',(112.23297,-100.655312,1.585)); +#171773 = VECTOR('',#171774,1.); +#171774 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#171775 = ORIENTED_EDGE('',*,*,#171776,.T.); +#171776 = EDGE_CURVE('',#171769,#171777,#171779,.T.); +#171777 = VERTEX_POINT('',#171778); +#171778 = CARTESIAN_POINT('',(112.749732,-100.904715,1.585)); +#171779 = CIRCLE('',#171780,0.348625649748); +#171780 = AXIS2_PLACEMENT_3D('',#171781,#171782,#171783); +#171781 = CARTESIAN_POINT('',(112.41233404586,-100.9924786838,1.585)); +#171782 = DIRECTION('',(0.,0.,-1.)); +#171783 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#171784 = ORIENTED_EDGE('',*,*,#171785,.T.); +#171785 = EDGE_CURVE('',#171777,#171786,#171788,.T.); +#171786 = VERTEX_POINT('',#171787); +#171787 = CARTESIAN_POINT('',(112.74851,-101.177252,1.585)); +#171788 = LINE('',#171789,#171790); +#171789 = CARTESIAN_POINT('',(112.749732,-100.904715,1.585)); +#171790 = VECTOR('',#171791,1.); +#171791 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#171792 = ORIENTED_EDGE('',*,*,#171793,.T.); +#171793 = EDGE_CURVE('',#171786,#171794,#171796,.T.); +#171794 = VERTEX_POINT('',#171795); +#171795 = CARTESIAN_POINT('',(112.500329,-101.421478,1.585)); +#171796 = CIRCLE('',#171797,0.348635327447); +#171797 = AXIS2_PLACEMENT_3D('',#171798,#171799,#171800); +#171798 = CARTESIAN_POINT('',(112.41255748129,-101.0840720841,1.585)); +#171799 = DIRECTION('',(0.,0.,-1.)); +#171800 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#171801 = ORIENTED_EDGE('',*,*,#171802,.T.); +#171802 = EDGE_CURVE('',#171794,#171803,#171805,.T.); +#171803 = VERTEX_POINT('',#171804); +#171804 = CARTESIAN_POINT('',(112.227792,-101.420256,1.585)); +#171805 = LINE('',#171806,#171807); +#171806 = CARTESIAN_POINT('',(112.500329,-101.421478,1.585)); +#171807 = VECTOR('',#171808,1.); +#171808 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#171809 = ORIENTED_EDGE('',*,*,#171810,.T.); +#171810 = EDGE_CURVE('',#171803,#171811,#171813,.T.); +#171811 = VERTEX_POINT('',#171812); +#171812 = CARTESIAN_POINT('',(112.105079,-101.35805,1.585)); +#171813 = LINE('',#171814,#171815); +#171814 = CARTESIAN_POINT('',(112.227792,-101.420256,1.585)); +#171815 = VECTOR('',#171816,1.); +#171816 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#171817 = ORIENTED_EDGE('',*,*,#171818,.T.); +#171818 = EDGE_CURVE('',#171811,#171819,#171821,.T.); +#171819 = VERTEX_POINT('',#171820); +#171820 = CARTESIAN_POINT('',(112.042384,-101.294347,1.585)); +#171821 = LINE('',#171822,#171823); +#171822 = CARTESIAN_POINT('',(112.105079,-101.35805,1.585)); +#171823 = VECTOR('',#171824,1.); +#171824 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#171825 = ORIENTED_EDGE('',*,*,#171826,.T.); +#171826 = EDGE_CURVE('',#171819,#171827,#171829,.T.); +#171827 = VERTEX_POINT('',#171828); +#171828 = CARTESIAN_POINT('',(112.157779,-101.199648,1.585)); +#171829 = CIRCLE('',#171830,7.50001266804E-02); +#171830 = AXIS2_PLACEMENT_3D('',#171831,#171832,#171833); +#171831 = CARTESIAN_POINT('',(112.10474505199,-101.2526802483,1.585)); +#171832 = DIRECTION('',(0.,0.,-1.)); +#171833 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#171834 = ORIENTED_EDGE('',*,*,#171835,.T.); +#171835 = EDGE_CURVE('',#171827,#171836,#171838,.T.); +#171836 = VERTEX_POINT('',#171837); +#171837 = CARTESIAN_POINT('',(112.196791,-101.238661,1.585)); +#171838 = LINE('',#171839,#171840); +#171839 = CARTESIAN_POINT('',(112.157779,-101.199648,1.585)); +#171840 = VECTOR('',#171841,1.); +#171841 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#171842 = ORIENTED_EDGE('',*,*,#171843,.T.); +#171843 = EDGE_CURVE('',#171836,#171844,#171846,.T.); +#171844 = VERTEX_POINT('',#171845); +#171845 = CARTESIAN_POINT('',(112.536507,-101.238661,1.585)); +#171846 = CIRCLE('',#171847,0.305620374329); +#171847 = AXIS2_PLACEMENT_3D('',#171848,#171849,#171850); +#171848 = CARTESIAN_POINT('',(112.366649,-100.98459,1.585)); +#171849 = DIRECTION('',(0.,0.,1.)); +#171850 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#171851 = ORIENTED_EDGE('',*,*,#171852,.T.); +#171852 = EDGE_CURVE('',#171844,#171853,#171855,.T.); +#171853 = VERTEX_POINT('',#171854); +#171854 = CARTESIAN_POINT('',(112.566914,-101.208253,1.585)); +#171855 = LINE('',#171856,#171857); +#171856 = CARTESIAN_POINT('',(112.536507,-101.238661,1.585)); +#171857 = VECTOR('',#171858,1.); +#171858 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#171859 = ORIENTED_EDGE('',*,*,#171860,.T.); +#171860 = EDGE_CURVE('',#171853,#171861,#171863,.T.); +#171861 = VERTEX_POINT('',#171862); +#171862 = CARTESIAN_POINT('',(112.566915,-100.868536,1.585)); +#171863 = CIRCLE('',#171864,0.305616146029); +#171864 = AXIS2_PLACEMENT_3D('',#171865,#171866,#171867); +#171865 = CARTESIAN_POINT('',(112.31284892049,-101.0383937521,1.585)); +#171866 = DIRECTION('',(0.,-0.,1.)); +#171867 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#171868 = ORIENTED_EDGE('',*,*,#171869,.T.); +#171869 = EDGE_CURVE('',#171861,#171870,#171872,.T.); +#171870 = VERTEX_POINT('',#171871); +#171871 = CARTESIAN_POINT('',(112.536508,-100.838129,1.585)); +#171872 = LINE('',#171873,#171874); +#171873 = CARTESIAN_POINT('',(112.566915,-100.868536,1.585)); +#171874 = VECTOR('',#171875,1.); +#171875 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#171876 = ORIENTED_EDGE('',*,*,#171877,.T.); +#171877 = EDGE_CURVE('',#171870,#171878,#171880,.T.); +#171878 = VERTEX_POINT('',#171879); +#171879 = CARTESIAN_POINT('',(112.196791,-100.838129,1.585)); +#171880 = CIRCLE('',#171881,0.305621483548); +#171881 = AXIS2_PLACEMENT_3D('',#171882,#171883,#171884); +#171882 = CARTESIAN_POINT('',(112.3666495,-101.092201,1.585)); +#171883 = DIRECTION('',(0.,0.,1.)); +#171884 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#171885 = ORIENTED_EDGE('',*,*,#171886,.T.); +#171886 = EDGE_CURVE('',#171878,#171887,#171889,.T.); +#171887 = VERTEX_POINT('',#171888); +#171888 = CARTESIAN_POINT('',(112.140001,-100.890306,1.585)); +#171889 = LINE('',#171890,#171891); +#171890 = CARTESIAN_POINT('',(112.196791,-100.838129,1.585)); +#171891 = VECTOR('',#171892,1.); +#171892 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#171893 = ORIENTED_EDGE('',*,*,#171894,.T.); +#171894 = EDGE_CURVE('',#171887,#171895,#171897,.T.); +#171895 = VERTEX_POINT('',#171896); +#171896 = CARTESIAN_POINT('',(112.030095,-100.831349,1.585)); +#171897 = CIRCLE('',#171898,7.500024172471E-02); +#171898 = AXIS2_PLACEMENT_3D('',#171899,#171900,#171901); +#171899 = CARTESIAN_POINT('',(112.10474497002,-100.8241089561,1.585)); +#171900 = DIRECTION('',(-0.,0.,-1.)); +#171901 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#171902 = ORIENTED_EDGE('',*,*,#171903,.T.); +#171903 = EDGE_CURVE('',#171895,#171717,#171904,.T.); +#171904 = LINE('',#171905,#171906); +#171905 = CARTESIAN_POINT('',(112.030095,-100.831349,1.585)); +#171906 = VECTOR('',#171907,1.); +#171907 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#171908 = PLANE('',#171909); +#171909 = AXIS2_PLACEMENT_3D('',#171910,#171911,#171912); +#171910 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171911 = DIRECTION('',(0.,0.,1.)); +#171912 = DIRECTION('',(1.,0.,-0.)); +#171913 = SHELL_BASED_SURFACE_MODEL('',(#171914)); +#171914 = OPEN_SHELL('',(#171915)); +#171915 = ADVANCED_FACE('',(#171916,#172018),#172120,.T.); +#171916 = FACE_BOUND('',#171917,.F.); +#171917 = EDGE_LOOP('',(#171918,#171929,#171937,#171945,#171954,#171962, + #171970,#171979,#171987,#171995,#172004,#172012)); +#171918 = ORIENTED_EDGE('',*,*,#171919,.T.); +#171919 = EDGE_CURVE('',#171920,#171922,#171924,.T.); +#171920 = VERTEX_POINT('',#171921); +#171921 = CARTESIAN_POINT('',(113.160142,-100.33242,1.585)); +#171922 = VERTEX_POINT('',#171923); +#171923 = CARTESIAN_POINT('',(113.53298,-100.337786,1.585)); +#171924 = CIRCLE('',#171925,0.291788488016); +#171925 = AXIS2_PLACEMENT_3D('',#171926,#171927,#171928); +#171926 = CARTESIAN_POINT('',(113.34333086911,-100.5595375025,1.585)); +#171927 = DIRECTION('',(0.,0.,-1.)); +#171928 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#171929 = ORIENTED_EDGE('',*,*,#171930,.T.); +#171930 = EDGE_CURVE('',#171922,#171931,#171933,.T.); +#171931 = VERTEX_POINT('',#171932); +#171932 = CARTESIAN_POINT('',(113.596433,-100.403316,1.585)); +#171933 = LINE('',#171934,#171935); +#171934 = CARTESIAN_POINT('',(113.53298,-100.337786,1.585)); +#171935 = VECTOR('',#171936,1.); +#171936 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#171937 = ORIENTED_EDGE('',*,*,#171938,.T.); +#171938 = EDGE_CURVE('',#171931,#171939,#171941,.T.); +#171939 = VERTEX_POINT('',#171940); +#171940 = CARTESIAN_POINT('',(113.653696,-100.520205,1.585)); +#171941 = LINE('',#171942,#171943); +#171942 = CARTESIAN_POINT('',(113.596433,-100.403316,1.585)); +#171943 = VECTOR('',#171944,1.); +#171944 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#171945 = ORIENTED_EDGE('',*,*,#171946,.T.); +#171946 = EDGE_CURVE('',#171939,#171947,#171949,.T.); +#171947 = VERTEX_POINT('',#171948); +#171948 = CARTESIAN_POINT('',(113.648017,-101.190983,1.585)); +#171949 = CIRCLE('',#171950,0.967158496826); +#171950 = AXIS2_PLACEMENT_3D('',#171951,#171952,#171953); +#171951 = CARTESIAN_POINT('',(112.74374970686,-100.8479141722,1.585)); +#171952 = DIRECTION('',(0.,0.,-1.)); +#171953 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#171954 = ORIENTED_EDGE('',*,*,#171955,.T.); +#171955 = EDGE_CURVE('',#171947,#171956,#171958,.T.); +#171956 = VERTEX_POINT('',#171957); +#171957 = CARTESIAN_POINT('',(113.591067,-101.299963,1.585)); +#171958 = LINE('',#171959,#171960); +#171959 = CARTESIAN_POINT('',(113.648017,-101.190983,1.585)); +#171960 = VECTOR('',#171961,1.); +#171961 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#171962 = ORIENTED_EDGE('',*,*,#171963,.T.); +#171963 = EDGE_CURVE('',#171956,#171964,#171966,.T.); +#171964 = VERTEX_POINT('',#171965); +#171965 = CARTESIAN_POINT('',(113.525537,-101.363417,1.585)); +#171966 = LINE('',#171967,#171968); +#171967 = CARTESIAN_POINT('',(113.591067,-101.299963,1.585)); +#171968 = VECTOR('',#171969,1.); +#171969 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#171970 = ORIENTED_EDGE('',*,*,#171971,.T.); +#171971 = EDGE_CURVE('',#171964,#171972,#171974,.T.); +#171972 = VERTEX_POINT('',#171973); +#171973 = CARTESIAN_POINT('',(113.152698,-101.35805,1.585)); +#171974 = CIRCLE('',#171975,0.290998264264); +#171975 = AXIS2_PLACEMENT_3D('',#171976,#171977,#171978); +#171976 = CARTESIAN_POINT('',(113.34233341815,-101.1373275544,1.585)); +#171977 = DIRECTION('',(-0.,0.,-1.)); +#171978 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#171979 = ORIENTED_EDGE('',*,*,#171980,.T.); +#171980 = EDGE_CURVE('',#171972,#171981,#171983,.T.); +#171981 = VERTEX_POINT('',#171982); +#171982 = CARTESIAN_POINT('',(113.089245,-101.292517,1.585)); +#171983 = LINE('',#171984,#171985); +#171984 = CARTESIAN_POINT('',(113.152698,-101.35805,1.585)); +#171985 = VECTOR('',#171986,1.); +#171986 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#171987 = ORIENTED_EDGE('',*,*,#171988,.T.); +#171988 = EDGE_CURVE('',#171981,#171989,#171991,.T.); +#171989 = VERTEX_POINT('',#171990); +#171990 = CARTESIAN_POINT('',(113.031984,-101.175632,1.585)); +#171991 = LINE('',#171992,#171993); +#171992 = CARTESIAN_POINT('',(113.089245,-101.292517,1.585)); +#171993 = VECTOR('',#171994,1.); +#171994 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#171995 = ORIENTED_EDGE('',*,*,#171996,.T.); +#171996 = EDGE_CURVE('',#171989,#171997,#171999,.T.); +#171997 = VERTEX_POINT('',#171998); +#171998 = CARTESIAN_POINT('',(113.037663,-100.504854,1.585)); +#171999 = CIRCLE('',#172000,0.967158496826); +#172000 = AXIS2_PLACEMENT_3D('',#172001,#172002,#172003); +#172001 = CARTESIAN_POINT('',(113.94193029313,-100.8479228277,1.585)); +#172002 = DIRECTION('',(0.,0.,-1.)); +#172003 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#172004 = ORIENTED_EDGE('',*,*,#172005,.T.); +#172005 = EDGE_CURVE('',#171997,#172006,#172008,.T.); +#172006 = VERTEX_POINT('',#172007); +#172007 = CARTESIAN_POINT('',(113.094612,-100.395873,1.585)); +#172008 = LINE('',#172009,#172010); +#172009 = CARTESIAN_POINT('',(113.037663,-100.504854,1.585)); +#172010 = VECTOR('',#172011,1.); +#172011 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#172012 = ORIENTED_EDGE('',*,*,#172013,.T.); +#172013 = EDGE_CURVE('',#172006,#171920,#172014,.T.); +#172014 = LINE('',#172015,#172016); +#172015 = CARTESIAN_POINT('',(113.094612,-100.395873,1.585)); +#172016 = VECTOR('',#172017,1.); +#172017 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#172018 = FACE_BOUND('',#172019,.F.); +#172019 = EDGE_LOOP('',(#172020,#172031,#172039,#172047,#172056,#172064, + #172072,#172081,#172089,#172097,#172106,#172114)); +#172020 = ORIENTED_EDGE('',*,*,#172021,.T.); +#172021 = EDGE_CURVE('',#172022,#172024,#172026,.T.); +#172022 = VERTEX_POINT('',#172023); +#172023 = CARTESIAN_POINT('',(113.44127,-100.457177,1.585)); +#172024 = VERTEX_POINT('',#172025); +#172025 = CARTESIAN_POINT('',(113.24441,-100.457177,1.585)); +#172026 = CIRCLE('',#172027,0.148516804184); +#172027 = AXIS2_PLACEMENT_3D('',#172028,#172029,#172030); +#172028 = CARTESIAN_POINT('',(113.34284,-100.568392,1.585)); +#172029 = DIRECTION('',(0.,0.,1.)); +#172030 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#172031 = ORIENTED_EDGE('',*,*,#172032,.T.); +#172032 = EDGE_CURVE('',#172024,#172033,#172035,.T.); +#172033 = VERTEX_POINT('',#172034); +#172034 = CARTESIAN_POINT('',(113.214003,-100.487584,1.585)); +#172035 = LINE('',#172036,#172037); +#172036 = CARTESIAN_POINT('',(113.24441,-100.457177,1.585)); +#172037 = VECTOR('',#172038,1.); +#172038 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#172039 = ORIENTED_EDGE('',*,*,#172040,.T.); +#172040 = EDGE_CURVE('',#172033,#172041,#172043,.T.); +#172041 = VERTEX_POINT('',#172042); +#172042 = CARTESIAN_POINT('',(113.175509,-100.564571,1.585)); +#172043 = LINE('',#172044,#172045); +#172044 = CARTESIAN_POINT('',(113.214003,-100.487584,1.585)); +#172045 = VECTOR('',#172046,1.); +#172046 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#172047 = ORIENTED_EDGE('',*,*,#172048,.T.); +#172048 = EDGE_CURVE('',#172041,#172049,#172051,.T.); +#172049 = VERTEX_POINT('',#172050); +#172050 = CARTESIAN_POINT('',(113.175509,-101.131266,1.585)); +#172051 = CIRCLE('',#172052,0.815450468383); +#172052 = AXIS2_PLACEMENT_3D('',#172053,#172054,#172055); +#172053 = CARTESIAN_POINT('',(113.94014856255,-100.8479185,1.585)); +#172054 = DIRECTION('',(0.,0.,1.)); +#172055 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#172056 = ORIENTED_EDGE('',*,*,#172057,.T.); +#172057 = EDGE_CURVE('',#172049,#172058,#172060,.T.); +#172058 = VERTEX_POINT('',#172059); +#172059 = CARTESIAN_POINT('',(113.214003,-101.208253,1.585)); +#172060 = LINE('',#172061,#172062); +#172061 = CARTESIAN_POINT('',(113.175509,-101.131266,1.585)); +#172062 = VECTOR('',#172063,1.); +#172063 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#172064 = ORIENTED_EDGE('',*,*,#172065,.T.); +#172065 = EDGE_CURVE('',#172058,#172066,#172068,.T.); +#172066 = VERTEX_POINT('',#172067); +#172067 = CARTESIAN_POINT('',(113.24441,-101.238661,1.585)); +#172068 = LINE('',#172069,#172070); +#172069 = CARTESIAN_POINT('',(113.214003,-101.208253,1.585)); +#172070 = VECTOR('',#172071,1.); +#172071 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#172072 = ORIENTED_EDGE('',*,*,#172073,.T.); +#172073 = EDGE_CURVE('',#172066,#172074,#172076,.T.); +#172074 = VERTEX_POINT('',#172075); +#172075 = CARTESIAN_POINT('',(113.441269,-101.238661,1.585)); +#172076 = CIRCLE('',#172077,0.14851572397); +#172077 = AXIS2_PLACEMENT_3D('',#172078,#172079,#172080); +#172078 = CARTESIAN_POINT('',(113.3428395,-101.127447,1.585)); +#172079 = DIRECTION('',(0.,0.,1.)); +#172080 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#172081 = ORIENTED_EDGE('',*,*,#172082,.T.); +#172082 = EDGE_CURVE('',#172074,#172083,#172085,.T.); +#172083 = VERTEX_POINT('',#172084); +#172084 = CARTESIAN_POINT('',(113.471676,-101.208253,1.585)); +#172085 = LINE('',#172086,#172087); +#172086 = CARTESIAN_POINT('',(113.441269,-101.238661,1.585)); +#172087 = VECTOR('',#172088,1.); +#172088 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#172089 = ORIENTED_EDGE('',*,*,#172090,.T.); +#172090 = EDGE_CURVE('',#172083,#172091,#172093,.T.); +#172091 = VERTEX_POINT('',#172092); +#172092 = CARTESIAN_POINT('',(113.51017,-101.131266,1.585)); +#172093 = LINE('',#172094,#172095); +#172094 = CARTESIAN_POINT('',(113.471676,-101.208253,1.585)); +#172095 = VECTOR('',#172096,1.); +#172096 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#172097 = ORIENTED_EDGE('',*,*,#172098,.T.); +#172098 = EDGE_CURVE('',#172091,#172099,#172101,.T.); +#172099 = VERTEX_POINT('',#172100); +#172100 = CARTESIAN_POINT('',(113.51017,-100.564571,1.585)); +#172101 = CIRCLE('',#172102,0.815433004022); +#172102 = AXIS2_PLACEMENT_3D('',#172103,#172104,#172105); +#172103 = CARTESIAN_POINT('',(112.74554906235,-100.8479185,1.585)); +#172104 = DIRECTION('',(0.,-0.,1.)); +#172105 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#172106 = ORIENTED_EDGE('',*,*,#172107,.T.); +#172107 = EDGE_CURVE('',#172099,#172108,#172110,.T.); +#172108 = VERTEX_POINT('',#172109); +#172109 = CARTESIAN_POINT('',(113.471677,-100.487584,1.585)); +#172110 = LINE('',#172111,#172112); +#172111 = CARTESIAN_POINT('',(113.51017,-100.564571,1.585)); +#172112 = VECTOR('',#172113,1.); +#172113 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#172114 = ORIENTED_EDGE('',*,*,#172115,.T.); +#172115 = EDGE_CURVE('',#172108,#172022,#172116,.T.); +#172116 = LINE('',#172117,#172118); +#172117 = CARTESIAN_POINT('',(113.471677,-100.487584,1.585)); +#172118 = VECTOR('',#172119,1.); +#172119 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#172120 = PLANE('',#172121); +#172121 = AXIS2_PLACEMENT_3D('',#172122,#172123,#172124); +#172122 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172123 = DIRECTION('',(0.,0.,1.)); +#172124 = DIRECTION('',(1.,0.,-0.)); +#172125 = SHELL_BASED_SURFACE_MODEL('',(#172126)); +#172126 = OPEN_SHELL('',(#172127)); +#172127 = ADVANCED_FACE('',(#172128,#172271),#172341,.T.); +#172128 = FACE_BOUND('',#172129,.F.); +#172129 = EDGE_LOOP('',(#172130,#172141,#172149,#172157,#172166,#172174, + #172182,#172190,#172198,#172206,#172214,#172222,#172231,#172239, + #172248,#172256,#172265)); +#172130 = ORIENTED_EDGE('',*,*,#172131,.T.); +#172131 = EDGE_CURVE('',#172132,#172134,#172136,.T.); +#172132 = VERTEX_POINT('',#172133); +#172133 = CARTESIAN_POINT('',(179.181984,-100.7583,1.585)); +#172134 = VERTEX_POINT('',#172135); +#172135 = CARTESIAN_POINT('',(179.41168,-100.328456,1.585)); +#172136 = CIRCLE('',#172137,0.610092147705); +#172137 = AXIS2_PLACEMENT_3D('',#172138,#172139,#172140); +#172138 = CARTESIAN_POINT('',(179.79013074024,-100.8069823481,1.585)); +#172139 = DIRECTION('',(0.,0.,-1.)); +#172140 = DIRECTION('',(-0.99681128913,7.979507417374E-02,0.)); +#172141 = ORIENTED_EDGE('',*,*,#172142,.T.); +#172142 = EDGE_CURVE('',#172134,#172143,#172145,.T.); +#172143 = VERTEX_POINT('',#172144); +#172144 = CARTESIAN_POINT('',(179.525827,-100.27436,1.585)); +#172145 = LINE('',#172146,#172147); +#172146 = CARTESIAN_POINT('',(179.41168,-100.328456,1.585)); +#172147 = VECTOR('',#172148,1.); +#172148 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#172149 = ORIENTED_EDGE('',*,*,#172150,.T.); +#172150 = EDGE_CURVE('',#172143,#172151,#172153,.T.); +#172151 = VERTEX_POINT('',#172152); +#172152 = CARTESIAN_POINT('',(179.745567,-100.27436,1.585)); +#172153 = LINE('',#172154,#172155); +#172154 = CARTESIAN_POINT('',(179.525827,-100.27436,1.585)); +#172155 = VECTOR('',#172156,1.); +#172156 = DIRECTION('',(1.,0.,0.)); +#172157 = ORIENTED_EDGE('',*,*,#172158,.T.); +#172158 = EDGE_CURVE('',#172151,#172159,#172161,.T.); +#172159 = VERTEX_POINT('',#172160); +#172160 = CARTESIAN_POINT('',(179.730935,-100.422919,1.585)); +#172161 = CIRCLE('',#172162,7.500006711462E-02); +#172162 = AXIS2_PLACEMENT_3D('',#172163,#172164,#172165); +#172163 = CARTESIAN_POINT('',(179.73093506711,-100.3479189328,1.585)); +#172164 = DIRECTION('',(0.,0.,-1.)); +#172165 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#172166 = ORIENTED_EDGE('',*,*,#172167,.T.); +#172167 = EDGE_CURVE('',#172159,#172168,#172170,.T.); +#172168 = VERTEX_POINT('',#172169); +#172169 = CARTESIAN_POINT('',(179.558164,-100.422919,1.585)); +#172170 = LINE('',#172171,#172172); +#172171 = CARTESIAN_POINT('',(179.730935,-100.422919,1.585)); +#172172 = VECTOR('',#172173,1.); +#172173 = DIRECTION('',(-1.,0.,0.)); +#172174 = ORIENTED_EDGE('',*,*,#172175,.T.); +#172175 = EDGE_CURVE('',#172168,#172176,#172178,.T.); +#172176 = VERTEX_POINT('',#172177); +#172177 = CARTESIAN_POINT('',(179.489648,-100.457177,1.585)); +#172178 = LINE('',#172179,#172180); +#172179 = CARTESIAN_POINT('',(179.558164,-100.422919,1.585)); +#172180 = VECTOR('',#172181,1.); +#172181 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#172182 = ORIENTED_EDGE('',*,*,#172183,.T.); +#172183 = EDGE_CURVE('',#172176,#172184,#172186,.T.); +#172184 = VERTEX_POINT('',#172185); +#172185 = CARTESIAN_POINT('',(179.455886,-100.490938,1.585)); +#172186 = LINE('',#172187,#172188); +#172187 = CARTESIAN_POINT('',(179.489648,-100.457177,1.585)); +#172188 = VECTOR('',#172189,1.); +#172189 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#172190 = ORIENTED_EDGE('',*,*,#172191,.T.); +#172191 = EDGE_CURVE('',#172184,#172192,#172194,.T.); +#172192 = VERTEX_POINT('',#172193); +#172193 = CARTESIAN_POINT('',(179.371974,-100.616807,1.585)); +#172194 = LINE('',#172195,#172196); +#172195 = CARTESIAN_POINT('',(179.455886,-100.490938,1.585)); +#172196 = VECTOR('',#172197,1.); +#172197 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#172198 = ORIENTED_EDGE('',*,*,#172199,.T.); +#172199 = EDGE_CURVE('',#172192,#172200,#172202,.T.); +#172200 = VERTEX_POINT('',#172201); +#172201 = CARTESIAN_POINT('',(179.35345,-100.690904,1.585)); +#172202 = LINE('',#172203,#172204); +#172203 = CARTESIAN_POINT('',(179.371974,-100.616807,1.585)); +#172204 = VECTOR('',#172205,1.); +#172205 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#172206 = ORIENTED_EDGE('',*,*,#172207,.T.); +#172207 = EDGE_CURVE('',#172200,#172208,#172210,.T.); +#172208 = VERTEX_POINT('',#172209); +#172209 = CARTESIAN_POINT('',(179.430589,-100.655312,1.585)); +#172210 = LINE('',#172211,#172212); +#172211 = CARTESIAN_POINT('',(179.35345,-100.690904,1.585)); +#172212 = VECTOR('',#172213,1.); +#172213 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#172214 = ORIENTED_EDGE('',*,*,#172215,.T.); +#172215 = EDGE_CURVE('',#172208,#172216,#172218,.T.); +#172216 = VERTEX_POINT('',#172217); +#172217 = CARTESIAN_POINT('',(179.655506,-100.656534,1.585)); +#172218 = LINE('',#172219,#172220); +#172219 = CARTESIAN_POINT('',(179.430589,-100.655312,1.585)); +#172220 = VECTOR('',#172221,1.); +#172221 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#172222 = ORIENTED_EDGE('',*,*,#172223,.T.); +#172223 = EDGE_CURVE('',#172216,#172224,#172226,.T.); +#172224 = VERTEX_POINT('',#172225); +#172225 = CARTESIAN_POINT('',(179.899732,-100.904715,1.585)); +#172226 = CIRCLE('',#172227,0.348625649748); +#172227 = AXIS2_PLACEMENT_3D('',#172228,#172229,#172230); +#172228 = CARTESIAN_POINT('',(179.56233404586,-100.9924786838,1.585)); +#172229 = DIRECTION('',(0.,0.,-1.)); +#172230 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#172231 = ORIENTED_EDGE('',*,*,#172232,.T.); +#172232 = EDGE_CURVE('',#172224,#172233,#172235,.T.); +#172233 = VERTEX_POINT('',#172234); +#172234 = CARTESIAN_POINT('',(179.89851,-101.177252,1.585)); +#172235 = LINE('',#172236,#172237); +#172236 = CARTESIAN_POINT('',(179.899732,-100.904715,1.585)); +#172237 = VECTOR('',#172238,1.); +#172238 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#172239 = ORIENTED_EDGE('',*,*,#172240,.T.); +#172240 = EDGE_CURVE('',#172233,#172241,#172243,.T.); +#172241 = VERTEX_POINT('',#172242); +#172242 = CARTESIAN_POINT('',(179.650329,-101.421478,1.585)); +#172243 = CIRCLE('',#172244,0.348635327447); +#172244 = AXIS2_PLACEMENT_3D('',#172245,#172246,#172247); +#172245 = CARTESIAN_POINT('',(179.56255748129,-101.0840720841,1.585)); +#172246 = DIRECTION('',(0.,0.,-1.)); +#172247 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#172248 = ORIENTED_EDGE('',*,*,#172249,.T.); +#172249 = EDGE_CURVE('',#172241,#172250,#172252,.T.); +#172250 = VERTEX_POINT('',#172251); +#172251 = CARTESIAN_POINT('',(179.425411,-101.420256,1.585)); +#172252 = LINE('',#172253,#172254); +#172253 = CARTESIAN_POINT('',(179.650329,-101.421478,1.585)); +#172254 = VECTOR('',#172255,1.); +#172255 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#172256 = ORIENTED_EDGE('',*,*,#172257,.T.); +#172257 = EDGE_CURVE('',#172250,#172258,#172260,.T.); +#172258 = VERTEX_POINT('',#172259); +#172259 = CARTESIAN_POINT('',(179.181186,-101.172074,1.585)); +#172260 = CIRCLE('',#172261,0.348628446662); +#172261 = AXIS2_PLACEMENT_3D('',#172262,#172263,#172264); +#172262 = CARTESIAN_POINT('',(179.51858661322,-101.0843094284,1.585)); +#172263 = DIRECTION('',(0.,0.,-1.)); +#172264 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#172265 = ORIENTED_EDGE('',*,*,#172266,.T.); +#172266 = EDGE_CURVE('',#172258,#172132,#172267,.T.); +#172267 = LINE('',#172268,#172269); +#172268 = CARTESIAN_POINT('',(179.181186,-101.172074,1.585)); +#172269 = VECTOR('',#172270,1.); +#172270 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#172271 = FACE_BOUND('',#172272,.F.); +#172272 = EDGE_LOOP('',(#172273,#172284,#172292,#172301,#172309,#172318, + #172326,#172335)); +#172273 = ORIENTED_EDGE('',*,*,#172274,.T.); +#172274 = EDGE_CURVE('',#172275,#172277,#172279,.T.); +#172275 = VERTEX_POINT('',#172276); +#172276 = CARTESIAN_POINT('',(179.686508,-100.838129,1.585)); +#172277 = VERTEX_POINT('',#172278); +#172278 = CARTESIAN_POINT('',(179.39441,-100.838129,1.585)); +#172279 = CIRCLE('',#172280,0.252889603602); +#172280 = AXIS2_PLACEMENT_3D('',#172281,#172282,#172283); +#172281 = CARTESIAN_POINT('',(179.540459,-101.044582,1.585)); +#172282 = DIRECTION('',(0.,0.,1.)); +#172283 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#172284 = ORIENTED_EDGE('',*,*,#172285,.T.); +#172285 = EDGE_CURVE('',#172277,#172286,#172288,.T.); +#172286 = VERTEX_POINT('',#172287); +#172287 = CARTESIAN_POINT('',(179.364003,-100.868536,1.585)); +#172288 = LINE('',#172289,#172290); +#172289 = CARTESIAN_POINT('',(179.39441,-100.838129,1.585)); +#172290 = VECTOR('',#172291,1.); +#172291 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#172292 = ORIENTED_EDGE('',*,*,#172293,.T.); +#172293 = EDGE_CURVE('',#172286,#172294,#172296,.T.); +#172294 = VERTEX_POINT('',#172295); +#172295 = CARTESIAN_POINT('',(179.364003,-101.208253,1.585)); +#172296 = CIRCLE('',#172297,0.305621483548); +#172297 = AXIS2_PLACEMENT_3D('',#172298,#172299,#172300); +#172298 = CARTESIAN_POINT('',(179.618075,-101.0383945,1.585)); +#172299 = DIRECTION('',(0.,0.,1.)); +#172300 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#172301 = ORIENTED_EDGE('',*,*,#172302,.T.); +#172302 = EDGE_CURVE('',#172294,#172303,#172305,.T.); +#172303 = VERTEX_POINT('',#172304); +#172304 = CARTESIAN_POINT('',(179.39441,-101.238661,1.585)); +#172305 = LINE('',#172306,#172307); +#172306 = CARTESIAN_POINT('',(179.364003,-101.208253,1.585)); +#172307 = VECTOR('',#172308,1.); +#172308 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#172309 = ORIENTED_EDGE('',*,*,#172310,.T.); +#172310 = EDGE_CURVE('',#172303,#172311,#172313,.T.); +#172311 = VERTEX_POINT('',#172312); +#172312 = CARTESIAN_POINT('',(179.686507,-101.238661,1.585)); +#172313 = CIRCLE('',#172314,0.252888498466); +#172314 = AXIS2_PLACEMENT_3D('',#172315,#172316,#172317); +#172315 = CARTESIAN_POINT('',(179.5404585,-101.032209,1.585)); +#172316 = DIRECTION('',(0.,0.,1.)); +#172317 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#172318 = ORIENTED_EDGE('',*,*,#172319,.T.); +#172319 = EDGE_CURVE('',#172311,#172320,#172322,.T.); +#172320 = VERTEX_POINT('',#172321); +#172321 = CARTESIAN_POINT('',(179.716914,-101.208253,1.585)); +#172322 = LINE('',#172323,#172324); +#172323 = CARTESIAN_POINT('',(179.686507,-101.238661,1.585)); +#172324 = VECTOR('',#172325,1.); +#172325 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#172326 = ORIENTED_EDGE('',*,*,#172327,.T.); +#172327 = EDGE_CURVE('',#172320,#172328,#172330,.T.); +#172328 = VERTEX_POINT('',#172329); +#172329 = CARTESIAN_POINT('',(179.716915,-100.868536,1.585)); +#172330 = CIRCLE('',#172331,0.305616146029); +#172331 = AXIS2_PLACEMENT_3D('',#172332,#172333,#172334); +#172332 = CARTESIAN_POINT('',(179.46284892049,-101.0383937521,1.585)); +#172333 = DIRECTION('',(0.,-0.,1.)); +#172334 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#172335 = ORIENTED_EDGE('',*,*,#172336,.T.); +#172336 = EDGE_CURVE('',#172328,#172275,#172337,.T.); +#172337 = LINE('',#172338,#172339); +#172338 = CARTESIAN_POINT('',(179.716915,-100.868536,1.585)); +#172339 = VECTOR('',#172340,1.); +#172340 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#172341 = PLANE('',#172342); +#172342 = AXIS2_PLACEMENT_3D('',#172343,#172344,#172345); +#172343 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172344 = DIRECTION('',(0.,0.,1.)); +#172345 = DIRECTION('',(1.,0.,-0.)); +#172346 = SHELL_BASED_SURFACE_MODEL('',(#172347)); +#172347 = OPEN_SHELL('',(#172348)); +#172348 = ADVANCED_FACE('',(#172349,#172451),#172553,.T.); +#172349 = FACE_BOUND('',#172350,.F.); +#172350 = EDGE_LOOP('',(#172351,#172362,#172370,#172378,#172387,#172395, + #172403,#172412,#172420,#172428,#172437,#172445)); +#172351 = ORIENTED_EDGE('',*,*,#172352,.T.); +#172352 = EDGE_CURVE('',#172353,#172355,#172357,.T.); +#172353 = VERTEX_POINT('',#172354); +#172354 = CARTESIAN_POINT('',(180.310142,-100.33242,1.585)); +#172355 = VERTEX_POINT('',#172356); +#172356 = CARTESIAN_POINT('',(180.68298,-100.337786,1.585)); +#172357 = CIRCLE('',#172358,0.291788488016); +#172358 = AXIS2_PLACEMENT_3D('',#172359,#172360,#172361); +#172359 = CARTESIAN_POINT('',(180.49333086911,-100.5595375025,1.585)); +#172360 = DIRECTION('',(0.,0.,-1.)); +#172361 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#172362 = ORIENTED_EDGE('',*,*,#172363,.T.); +#172363 = EDGE_CURVE('',#172355,#172364,#172366,.T.); +#172364 = VERTEX_POINT('',#172365); +#172365 = CARTESIAN_POINT('',(180.746433,-100.403316,1.585)); +#172366 = LINE('',#172367,#172368); +#172367 = CARTESIAN_POINT('',(180.68298,-100.337786,1.585)); +#172368 = VECTOR('',#172369,1.); +#172369 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#172370 = ORIENTED_EDGE('',*,*,#172371,.T.); +#172371 = EDGE_CURVE('',#172364,#172372,#172374,.T.); +#172372 = VERTEX_POINT('',#172373); +#172373 = CARTESIAN_POINT('',(180.803696,-100.520205,1.585)); +#172374 = LINE('',#172375,#172376); +#172375 = CARTESIAN_POINT('',(180.746433,-100.403316,1.585)); +#172376 = VECTOR('',#172377,1.); +#172377 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#172378 = ORIENTED_EDGE('',*,*,#172379,.T.); +#172379 = EDGE_CURVE('',#172372,#172380,#172382,.T.); +#172380 = VERTEX_POINT('',#172381); +#172381 = CARTESIAN_POINT('',(180.798017,-101.190983,1.585)); +#172382 = CIRCLE('',#172383,0.967158496826); +#172383 = AXIS2_PLACEMENT_3D('',#172384,#172385,#172386); +#172384 = CARTESIAN_POINT('',(179.89374970686,-100.8479141722,1.585)); +#172385 = DIRECTION('',(0.,0.,-1.)); +#172386 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#172387 = ORIENTED_EDGE('',*,*,#172388,.T.); +#172388 = EDGE_CURVE('',#172380,#172389,#172391,.T.); +#172389 = VERTEX_POINT('',#172390); +#172390 = CARTESIAN_POINT('',(180.741067,-101.299963,1.585)); +#172391 = LINE('',#172392,#172393); +#172392 = CARTESIAN_POINT('',(180.798017,-101.190983,1.585)); +#172393 = VECTOR('',#172394,1.); +#172394 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#172395 = ORIENTED_EDGE('',*,*,#172396,.T.); +#172396 = EDGE_CURVE('',#172389,#172397,#172399,.T.); +#172397 = VERTEX_POINT('',#172398); +#172398 = CARTESIAN_POINT('',(180.675537,-101.363417,1.585)); +#172399 = LINE('',#172400,#172401); +#172400 = CARTESIAN_POINT('',(180.741067,-101.299963,1.585)); +#172401 = VECTOR('',#172402,1.); +#172402 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#172403 = ORIENTED_EDGE('',*,*,#172404,.T.); +#172404 = EDGE_CURVE('',#172397,#172405,#172407,.T.); +#172405 = VERTEX_POINT('',#172406); +#172406 = CARTESIAN_POINT('',(180.302698,-101.35805,1.585)); +#172407 = CIRCLE('',#172408,0.290998264264); +#172408 = AXIS2_PLACEMENT_3D('',#172409,#172410,#172411); +#172409 = CARTESIAN_POINT('',(180.49233341815,-101.1373275544,1.585)); +#172410 = DIRECTION('',(-0.,0.,-1.)); +#172411 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#172412 = ORIENTED_EDGE('',*,*,#172413,.T.); +#172413 = EDGE_CURVE('',#172405,#172414,#172416,.T.); +#172414 = VERTEX_POINT('',#172415); +#172415 = CARTESIAN_POINT('',(180.239245,-101.292517,1.585)); +#172416 = LINE('',#172417,#172418); +#172417 = CARTESIAN_POINT('',(180.302698,-101.35805,1.585)); +#172418 = VECTOR('',#172419,1.); +#172419 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#172420 = ORIENTED_EDGE('',*,*,#172421,.T.); +#172421 = EDGE_CURVE('',#172414,#172422,#172424,.T.); +#172422 = VERTEX_POINT('',#172423); +#172423 = CARTESIAN_POINT('',(180.181984,-101.175632,1.585)); +#172424 = LINE('',#172425,#172426); +#172425 = CARTESIAN_POINT('',(180.239245,-101.292517,1.585)); +#172426 = VECTOR('',#172427,1.); +#172427 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#172428 = ORIENTED_EDGE('',*,*,#172429,.T.); +#172429 = EDGE_CURVE('',#172422,#172430,#172432,.T.); +#172430 = VERTEX_POINT('',#172431); +#172431 = CARTESIAN_POINT('',(180.187663,-100.504854,1.585)); +#172432 = CIRCLE('',#172433,0.967158496826); +#172433 = AXIS2_PLACEMENT_3D('',#172434,#172435,#172436); +#172434 = CARTESIAN_POINT('',(181.09193029313,-100.8479228277,1.585)); +#172435 = DIRECTION('',(0.,0.,-1.)); +#172436 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#172437 = ORIENTED_EDGE('',*,*,#172438,.T.); +#172438 = EDGE_CURVE('',#172430,#172439,#172441,.T.); +#172439 = VERTEX_POINT('',#172440); +#172440 = CARTESIAN_POINT('',(180.244612,-100.395873,1.585)); +#172441 = LINE('',#172442,#172443); +#172442 = CARTESIAN_POINT('',(180.187663,-100.504854,1.585)); +#172443 = VECTOR('',#172444,1.); +#172444 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#172445 = ORIENTED_EDGE('',*,*,#172446,.T.); +#172446 = EDGE_CURVE('',#172439,#172353,#172447,.T.); +#172447 = LINE('',#172448,#172449); +#172448 = CARTESIAN_POINT('',(180.244612,-100.395873,1.585)); +#172449 = VECTOR('',#172450,1.); +#172450 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#172451 = FACE_BOUND('',#172452,.F.); +#172452 = EDGE_LOOP('',(#172453,#172464,#172472,#172480,#172489,#172497, + #172505,#172514,#172522,#172530,#172539,#172547)); +#172453 = ORIENTED_EDGE('',*,*,#172454,.T.); +#172454 = EDGE_CURVE('',#172455,#172457,#172459,.T.); +#172455 = VERTEX_POINT('',#172456); +#172456 = CARTESIAN_POINT('',(180.59127,-100.457177,1.585)); +#172457 = VERTEX_POINT('',#172458); +#172458 = CARTESIAN_POINT('',(180.39441,-100.457177,1.585)); +#172459 = CIRCLE('',#172460,0.148516804184); +#172460 = AXIS2_PLACEMENT_3D('',#172461,#172462,#172463); +#172461 = CARTESIAN_POINT('',(180.49284,-100.568392,1.585)); +#172462 = DIRECTION('',(0.,0.,1.)); +#172463 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#172464 = ORIENTED_EDGE('',*,*,#172465,.T.); +#172465 = EDGE_CURVE('',#172457,#172466,#172468,.T.); +#172466 = VERTEX_POINT('',#172467); +#172467 = CARTESIAN_POINT('',(180.364003,-100.487584,1.585)); +#172468 = LINE('',#172469,#172470); +#172469 = CARTESIAN_POINT('',(180.39441,-100.457177,1.585)); +#172470 = VECTOR('',#172471,1.); +#172471 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#172472 = ORIENTED_EDGE('',*,*,#172473,.T.); +#172473 = EDGE_CURVE('',#172466,#172474,#172476,.T.); +#172474 = VERTEX_POINT('',#172475); +#172475 = CARTESIAN_POINT('',(180.325509,-100.564571,1.585)); +#172476 = LINE('',#172477,#172478); +#172477 = CARTESIAN_POINT('',(180.364003,-100.487584,1.585)); +#172478 = VECTOR('',#172479,1.); +#172479 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#172480 = ORIENTED_EDGE('',*,*,#172481,.T.); +#172481 = EDGE_CURVE('',#172474,#172482,#172484,.T.); +#172482 = VERTEX_POINT('',#172483); +#172483 = CARTESIAN_POINT('',(180.325509,-101.131266,1.585)); +#172484 = CIRCLE('',#172485,0.815450468383); +#172485 = AXIS2_PLACEMENT_3D('',#172486,#172487,#172488); +#172486 = CARTESIAN_POINT('',(181.09014856255,-100.8479185,1.585)); +#172487 = DIRECTION('',(0.,0.,1.)); +#172488 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#172489 = ORIENTED_EDGE('',*,*,#172490,.T.); +#172490 = EDGE_CURVE('',#172482,#172491,#172493,.T.); +#172491 = VERTEX_POINT('',#172492); +#172492 = CARTESIAN_POINT('',(180.364003,-101.208253,1.585)); +#172493 = LINE('',#172494,#172495); +#172494 = CARTESIAN_POINT('',(180.325509,-101.131266,1.585)); +#172495 = VECTOR('',#172496,1.); +#172496 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#172497 = ORIENTED_EDGE('',*,*,#172498,.T.); +#172498 = EDGE_CURVE('',#172491,#172499,#172501,.T.); +#172499 = VERTEX_POINT('',#172500); +#172500 = CARTESIAN_POINT('',(180.39441,-101.238661,1.585)); +#172501 = LINE('',#172502,#172503); +#172502 = CARTESIAN_POINT('',(180.364003,-101.208253,1.585)); +#172503 = VECTOR('',#172504,1.); +#172504 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#172505 = ORIENTED_EDGE('',*,*,#172506,.T.); +#172506 = EDGE_CURVE('',#172499,#172507,#172509,.T.); +#172507 = VERTEX_POINT('',#172508); +#172508 = CARTESIAN_POINT('',(180.591269,-101.238661,1.585)); +#172509 = CIRCLE('',#172510,0.14851572397); +#172510 = AXIS2_PLACEMENT_3D('',#172511,#172512,#172513); +#172511 = CARTESIAN_POINT('',(180.4928395,-101.127447,1.585)); +#172512 = DIRECTION('',(0.,0.,1.)); +#172513 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#172514 = ORIENTED_EDGE('',*,*,#172515,.T.); +#172515 = EDGE_CURVE('',#172507,#172516,#172518,.T.); +#172516 = VERTEX_POINT('',#172517); +#172517 = CARTESIAN_POINT('',(180.621676,-101.208253,1.585)); +#172518 = LINE('',#172519,#172520); +#172519 = CARTESIAN_POINT('',(180.591269,-101.238661,1.585)); +#172520 = VECTOR('',#172521,1.); +#172521 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#172522 = ORIENTED_EDGE('',*,*,#172523,.T.); +#172523 = EDGE_CURVE('',#172516,#172524,#172526,.T.); +#172524 = VERTEX_POINT('',#172525); +#172525 = CARTESIAN_POINT('',(180.66017,-101.131266,1.585)); +#172526 = LINE('',#172527,#172528); +#172527 = CARTESIAN_POINT('',(180.621676,-101.208253,1.585)); +#172528 = VECTOR('',#172529,1.); +#172529 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#172530 = ORIENTED_EDGE('',*,*,#172531,.T.); +#172531 = EDGE_CURVE('',#172524,#172532,#172534,.T.); +#172532 = VERTEX_POINT('',#172533); +#172533 = CARTESIAN_POINT('',(180.66017,-100.564571,1.585)); +#172534 = CIRCLE('',#172535,0.815433004022); +#172535 = AXIS2_PLACEMENT_3D('',#172536,#172537,#172538); +#172536 = CARTESIAN_POINT('',(179.89554906235,-100.8479185,1.585)); +#172537 = DIRECTION('',(0.,-0.,1.)); +#172538 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#172539 = ORIENTED_EDGE('',*,*,#172540,.T.); +#172540 = EDGE_CURVE('',#172532,#172541,#172543,.T.); +#172541 = VERTEX_POINT('',#172542); +#172542 = CARTESIAN_POINT('',(180.621677,-100.487584,1.585)); +#172543 = LINE('',#172544,#172545); +#172544 = CARTESIAN_POINT('',(180.66017,-100.564571,1.585)); +#172545 = VECTOR('',#172546,1.); +#172546 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#172547 = ORIENTED_EDGE('',*,*,#172548,.T.); +#172548 = EDGE_CURVE('',#172541,#172455,#172549,.T.); +#172549 = LINE('',#172550,#172551); +#172550 = CARTESIAN_POINT('',(180.621677,-100.487584,1.585)); +#172551 = VECTOR('',#172552,1.); +#172552 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#172553 = PLANE('',#172554); +#172554 = AXIS2_PLACEMENT_3D('',#172555,#172556,#172557); +#172555 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172556 = DIRECTION('',(0.,0.,1.)); +#172557 = DIRECTION('',(1.,0.,-0.)); +#172558 = SHELL_BASED_SURFACE_MODEL('',(#172559)); +#172559 = OPEN_SHELL('',(#172560)); +#172560 = ADVANCED_FACE('',(#172561,#172614),#172640,.T.); +#172561 = FACE_BOUND('',#172562,.F.); +#172562 = EDGE_LOOP('',(#172563,#172574,#172582,#172591,#172599,#172608) + ); +#172563 = ORIENTED_EDGE('',*,*,#172564,.T.); +#172564 = EDGE_CURVE('',#172565,#172567,#172569,.T.); +#172565 = VERTEX_POINT('',#172566); +#172566 = CARTESIAN_POINT('',(140.149224,-100.980674,1.585)); +#172567 = VERTEX_POINT('',#172568); +#172568 = CARTESIAN_POINT('',(140.234076,-100.980674,1.585)); +#172569 = CIRCLE('',#172570,5.999686798802E-02); +#172570 = AXIS2_PLACEMENT_3D('',#172571,#172572,#172573); +#172571 = CARTESIAN_POINT('',(140.19165,-101.0230963843,1.585)); +#172572 = DIRECTION('',(0.,0.,-1.)); +#172573 = DIRECTION('',(-0.707136912688,0.707076648401,0.)); +#172574 = ORIENTED_EDGE('',*,*,#172575,.T.); +#172575 = EDGE_CURVE('',#172567,#172576,#172578,.T.); +#172576 = VERTEX_POINT('',#172577); +#172577 = CARTESIAN_POINT('',(140.534076,-101.280674,1.585)); +#172578 = LINE('',#172579,#172580); +#172579 = CARTESIAN_POINT('',(140.234076,-100.980674,1.585)); +#172580 = VECTOR('',#172581,1.); +#172581 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#172582 = ORIENTED_EDGE('',*,*,#172583,.T.); +#172583 = EDGE_CURVE('',#172576,#172584,#172586,.T.); +#172584 = VERTEX_POINT('',#172585); +#172585 = CARTESIAN_POINT('',(140.49165,-101.3831,1.585)); +#172586 = CIRCLE('',#172587,5.999940475497E-02); +#172587 = AXIS2_PLACEMENT_3D('',#172588,#172589,#172590); +#172588 = CARTESIAN_POINT('',(140.49165062331,-101.3231005952,1.585)); +#172589 = DIRECTION('',(0.,0.,-1.)); +#172590 = DIRECTION('',(0.707096626292,0.707116935935,0.)); +#172591 = ORIENTED_EDGE('',*,*,#172592,.T.); +#172592 = EDGE_CURVE('',#172584,#172593,#172595,.T.); +#172593 = VERTEX_POINT('',#172594); +#172594 = CARTESIAN_POINT('',(139.89165,-101.3831,1.585)); +#172595 = LINE('',#172596,#172597); +#172596 = CARTESIAN_POINT('',(140.49165,-101.3831,1.585)); +#172597 = VECTOR('',#172598,1.); +#172598 = DIRECTION('',(-1.,0.,0.)); +#172599 = ORIENTED_EDGE('',*,*,#172600,.T.); +#172600 = EDGE_CURVE('',#172593,#172601,#172603,.T.); +#172601 = VERTEX_POINT('',#172602); +#172602 = CARTESIAN_POINT('',(139.849224,-101.280674,1.585)); +#172603 = CIRCLE('',#172604,5.999940475496E-02); +#172604 = AXIS2_PLACEMENT_3D('',#172605,#172606,#172607); +#172605 = CARTESIAN_POINT('',(139.89164937668,-101.3231005952,1.585)); +#172606 = DIRECTION('',(0.,0.,-1.)); +#172607 = DIRECTION('',(1.038874045148E-05,-0.999999999946,0.)); +#172608 = ORIENTED_EDGE('',*,*,#172609,.T.); +#172609 = EDGE_CURVE('',#172601,#172565,#172610,.T.); +#172610 = LINE('',#172611,#172612); +#172611 = CARTESIAN_POINT('',(139.849224,-101.280674,1.585)); +#172612 = VECTOR('',#172613,1.); +#172613 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#172614 = FACE_BOUND('',#172615,.F.); +#172615 = EDGE_LOOP('',(#172616,#172626,#172634)); +#172616 = ORIENTED_EDGE('',*,*,#172617,.T.); +#172617 = EDGE_CURVE('',#172618,#172620,#172622,.T.); +#172618 = VERTEX_POINT('',#172619); +#172619 = CARTESIAN_POINT('',(140.036502,-101.2631,1.585)); +#172620 = VERTEX_POINT('',#172621); +#172621 = CARTESIAN_POINT('',(140.346798,-101.2631,1.585)); +#172622 = LINE('',#172623,#172624); +#172623 = CARTESIAN_POINT('',(140.036502,-101.2631,1.585)); +#172624 = VECTOR('',#172625,1.); +#172625 = DIRECTION('',(1.,0.,0.)); +#172626 = ORIENTED_EDGE('',*,*,#172627,.T.); +#172627 = EDGE_CURVE('',#172620,#172628,#172630,.T.); +#172628 = VERTEX_POINT('',#172629); +#172629 = CARTESIAN_POINT('',(140.19165,-101.107952,1.585)); +#172630 = LINE('',#172631,#172632); +#172631 = CARTESIAN_POINT('',(140.346798,-101.2631,1.585)); +#172632 = VECTOR('',#172633,1.); +#172633 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#172634 = ORIENTED_EDGE('',*,*,#172635,.T.); +#172635 = EDGE_CURVE('',#172628,#172618,#172636,.T.); +#172636 = LINE('',#172637,#172638); +#172637 = CARTESIAN_POINT('',(140.19165,-101.107952,1.585)); +#172638 = VECTOR('',#172639,1.); +#172639 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#172640 = PLANE('',#172641); +#172641 = AXIS2_PLACEMENT_3D('',#172642,#172643,#172644); +#172642 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172643 = DIRECTION('',(0.,0.,1.)); +#172644 = DIRECTION('',(1.,0.,-0.)); +#172645 = SHELL_BASED_SURFACE_MODEL('',(#172646)); +#172646 = OPEN_SHELL('',(#172647)); +#172647 = ADVANCED_FACE('',(#172648,#172782),#172860,.T.); +#172648 = FACE_BOUND('',#172649,.F.); +#172649 = EDGE_LOOP('',(#172650,#172660,#172668,#172676,#172684,#172693, + #172701,#172710,#172718,#172726,#172734,#172742,#172750,#172759, + #172767,#172776)); +#172650 = ORIENTED_EDGE('',*,*,#172651,.T.); +#172651 = EDGE_CURVE('',#172652,#172654,#172656,.T.); +#172652 = VERTEX_POINT('',#172653); +#172653 = CARTESIAN_POINT('',(139.968689,-98.767667,1.585)); +#172654 = VERTEX_POINT('',#172655); +#172655 = CARTESIAN_POINT('',(139.99165,-98.7631,1.585)); +#172656 = LINE('',#172657,#172658); +#172657 = CARTESIAN_POINT('',(139.968689,-98.767667,1.585)); +#172658 = VECTOR('',#172659,1.); +#172659 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#172660 = ORIENTED_EDGE('',*,*,#172661,.T.); +#172661 = EDGE_CURVE('',#172654,#172662,#172664,.T.); +#172662 = VERTEX_POINT('',#172663); +#172663 = CARTESIAN_POINT('',(142.79165,-98.7631,1.585)); +#172664 = LINE('',#172665,#172666); +#172665 = CARTESIAN_POINT('',(139.99165,-98.7631,1.585)); +#172666 = VECTOR('',#172667,1.); +#172667 = DIRECTION('',(1.,0.,0.)); +#172668 = ORIENTED_EDGE('',*,*,#172669,.T.); +#172669 = EDGE_CURVE('',#172662,#172670,#172672,.T.); +#172670 = VERTEX_POINT('',#172671); +#172671 = CARTESIAN_POINT('',(142.814611,-98.767667,1.585)); +#172672 = LINE('',#172673,#172674); +#172673 = CARTESIAN_POINT('',(142.79165,-98.7631,1.585)); +#172674 = VECTOR('',#172675,1.); +#172675 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#172676 = ORIENTED_EDGE('',*,*,#172677,.T.); +#172677 = EDGE_CURVE('',#172670,#172678,#172680,.T.); +#172678 = VERTEX_POINT('',#172679); +#172679 = CARTESIAN_POINT('',(142.889919,-98.777703,1.585)); +#172680 = LINE('',#172681,#172682); +#172681 = CARTESIAN_POINT('',(142.814611,-98.767667,1.585)); +#172682 = VECTOR('',#172683,1.); +#172683 = DIRECTION('',(0.991236635155,-0.132098195018,0.)); +#172684 = ORIENTED_EDGE('',*,*,#172685,.T.); +#172685 = EDGE_CURVE('',#172678,#172686,#172688,.T.); +#172686 = VERTEX_POINT('',#172687); +#172687 = CARTESIAN_POINT('',(143.50165,-99.5231,1.585)); +#172688 = CIRCLE('',#172689,0.760001389949); +#172689 = AXIS2_PLACEMENT_3D('',#172690,#172691,#172692); +#172690 = CARTESIAN_POINT('',(142.74164861005,-99.52310088314,1.585)); +#172691 = DIRECTION('',(0.,0.,-1.)); +#172692 = DIRECTION('',(0.195092261553,0.980784894603,0.)); +#172693 = ORIENTED_EDGE('',*,*,#172694,.T.); +#172694 = EDGE_CURVE('',#172686,#172695,#172697,.T.); +#172695 = VERTEX_POINT('',#172696); +#172696 = CARTESIAN_POINT('',(143.50165,-100.1231,1.585)); +#172697 = LINE('',#172698,#172699); +#172698 = CARTESIAN_POINT('',(143.50165,-99.5231,1.585)); +#172699 = VECTOR('',#172700,1.); +#172700 = DIRECTION('',(0.,-1.,0.)); +#172701 = ORIENTED_EDGE('',*,*,#172702,.T.); +#172702 = EDGE_CURVE('',#172695,#172703,#172705,.T.); +#172703 = VERTEX_POINT('',#172704); +#172704 = CARTESIAN_POINT('',(142.889919,-100.868497,1.585)); +#172705 = CIRCLE('',#172706,0.759999019977); +#172706 = AXIS2_PLACEMENT_3D('',#172707,#172708,#172709); +#172707 = CARTESIAN_POINT('',(142.74165098002,-100.1231010618,1.585)); +#172708 = DIRECTION('',(0.,0.,-1.)); +#172709 = DIRECTION('',(0.999999999999,1.397165543076E-06,0.)); +#172710 = ORIENTED_EDGE('',*,*,#172711,.T.); +#172711 = EDGE_CURVE('',#172703,#172712,#172714,.T.); +#172712 = VERTEX_POINT('',#172713); +#172713 = CARTESIAN_POINT('',(142.814611,-100.878533,1.585)); +#172714 = LINE('',#172715,#172716); +#172715 = CARTESIAN_POINT('',(142.889919,-100.868497,1.585)); +#172716 = VECTOR('',#172717,1.); +#172717 = DIRECTION('',(-0.991236635155,-0.132098195018,0.)); +#172718 = ORIENTED_EDGE('',*,*,#172719,.T.); +#172719 = EDGE_CURVE('',#172712,#172720,#172722,.T.); +#172720 = VERTEX_POINT('',#172721); +#172721 = CARTESIAN_POINT('',(142.79165,-100.8831,1.585)); +#172722 = LINE('',#172723,#172724); +#172723 = CARTESIAN_POINT('',(142.814611,-100.878533,1.585)); +#172724 = VECTOR('',#172725,1.); +#172725 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#172726 = ORIENTED_EDGE('',*,*,#172727,.T.); +#172727 = EDGE_CURVE('',#172720,#172728,#172730,.T.); +#172728 = VERTEX_POINT('',#172729); +#172729 = CARTESIAN_POINT('',(139.99165,-100.8831,1.585)); +#172730 = LINE('',#172731,#172732); +#172731 = CARTESIAN_POINT('',(142.79165,-100.8831,1.585)); +#172732 = VECTOR('',#172733,1.); +#172733 = DIRECTION('',(-1.,0.,0.)); +#172734 = ORIENTED_EDGE('',*,*,#172735,.T.); +#172735 = EDGE_CURVE('',#172728,#172736,#172738,.T.); +#172736 = VERTEX_POINT('',#172737); +#172737 = CARTESIAN_POINT('',(139.965783,-100.875627,1.585)); +#172738 = LINE('',#172739,#172740); +#172739 = CARTESIAN_POINT('',(139.99165,-100.8831,1.585)); +#172740 = VECTOR('',#172741,1.); +#172741 = DIRECTION('',(-0.960711101854,0.277550317554,0.)); +#172742 = ORIENTED_EDGE('',*,*,#172743,.T.); +#172743 = EDGE_CURVE('',#172736,#172744,#172746,.T.); +#172744 = VERTEX_POINT('',#172745); +#172745 = CARTESIAN_POINT('',(139.893381,-100.868497,1.585)); +#172746 = LINE('',#172747,#172748); +#172747 = CARTESIAN_POINT('',(139.965783,-100.875627,1.585)); +#172748 = VECTOR('',#172749,1.); +#172749 = DIRECTION('',(-0.995186033295,9.800387306128E-02,0.)); +#172750 = ORIENTED_EDGE('',*,*,#172751,.T.); +#172751 = EDGE_CURVE('',#172744,#172752,#172754,.T.); +#172752 = VERTEX_POINT('',#172753); +#172753 = CARTESIAN_POINT('',(139.28165,-100.1231,1.585)); +#172754 = CIRCLE('',#172755,0.760001389949); +#172755 = AXIS2_PLACEMENT_3D('',#172756,#172757,#172758); +#172756 = CARTESIAN_POINT('',(140.04165138994,-100.1230991168,1.585)); +#172757 = DIRECTION('',(0.,0.,-1.)); +#172758 = DIRECTION('',(-0.195092261553,-0.980784894603,-0.)); +#172759 = ORIENTED_EDGE('',*,*,#172760,.T.); +#172760 = EDGE_CURVE('',#172752,#172761,#172763,.T.); +#172761 = VERTEX_POINT('',#172762); +#172762 = CARTESIAN_POINT('',(139.28165,-99.5231,1.585)); +#172763 = LINE('',#172764,#172765); +#172764 = CARTESIAN_POINT('',(139.28165,-100.1231,1.585)); +#172765 = VECTOR('',#172766,1.); +#172766 = DIRECTION('',(0.,1.,0.)); +#172767 = ORIENTED_EDGE('',*,*,#172768,.T.); +#172768 = EDGE_CURVE('',#172761,#172769,#172771,.T.); +#172769 = VERTEX_POINT('',#172770); +#172770 = CARTESIAN_POINT('',(139.893381,-98.777703,1.585)); +#172771 = CIRCLE('',#172772,0.759999019977); +#172772 = AXIS2_PLACEMENT_3D('',#172773,#172774,#172775); +#172773 = CARTESIAN_POINT('',(140.04164901997,-99.52309893815,1.585)); +#172774 = DIRECTION('',(0.,0.,-1.)); +#172775 = DIRECTION('',(-0.999999999999,-1.397165636569E-06,-0.)); +#172776 = ORIENTED_EDGE('',*,*,#172777,.T.); +#172777 = EDGE_CURVE('',#172769,#172652,#172778,.T.); +#172778 = LINE('',#172779,#172780); +#172779 = CARTESIAN_POINT('',(139.893381,-98.777703,1.585)); +#172780 = VECTOR('',#172781,1.); +#172781 = DIRECTION('',(0.991236635155,0.132098195018,0.)); +#172782 = FACE_BOUND('',#172783,.F.); +#172783 = EDGE_LOOP('',(#172784,#172795,#172803,#172811,#172820,#172828, + #172837,#172845,#172854)); +#172784 = ORIENTED_EDGE('',*,*,#172785,.T.); +#172785 = EDGE_CURVE('',#172786,#172788,#172790,.T.); +#172786 = VERTEX_POINT('',#172787); +#172787 = CARTESIAN_POINT('',(143.38165,-99.450989,1.585)); +#172788 = VERTEX_POINT('',#172789); +#172789 = CARTESIAN_POINT('',(142.813761,-98.8831,1.585)); +#172790 = CIRCLE('',#172791,0.64404917508); +#172791 = AXIS2_PLACEMENT_3D('',#172792,#172793,#172794); +#172792 = CARTESIAN_POINT('',(142.74165046088,-99.52309953911,1.585)); +#172793 = DIRECTION('',(0.,0.,1.)); +#172794 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#172795 = ORIENTED_EDGE('',*,*,#172796,.T.); +#172796 = EDGE_CURVE('',#172788,#172797,#172799,.T.); +#172797 = VERTEX_POINT('',#172798); +#172798 = CARTESIAN_POINT('',(140.04165,-98.8831,1.585)); +#172799 = LINE('',#172800,#172801); +#172800 = CARTESIAN_POINT('',(142.813761,-98.8831,1.585)); +#172801 = VECTOR('',#172802,1.); +#172802 = DIRECTION('',(-1.,0.,0.)); +#172803 = ORIENTED_EDGE('',*,*,#172804,.T.); +#172804 = EDGE_CURVE('',#172797,#172805,#172807,.T.); +#172805 = VERTEX_POINT('',#172806); +#172806 = CARTESIAN_POINT('',(139.969539,-98.8831,1.585)); +#172807 = LINE('',#172808,#172809); +#172808 = CARTESIAN_POINT('',(140.04165,-98.8831,1.585)); +#172809 = VECTOR('',#172810,1.); +#172810 = DIRECTION('',(-1.,0.,0.)); +#172811 = ORIENTED_EDGE('',*,*,#172812,.T.); +#172812 = EDGE_CURVE('',#172805,#172813,#172815,.T.); +#172813 = VERTEX_POINT('',#172814); +#172814 = CARTESIAN_POINT('',(139.40165,-99.450989,1.585)); +#172815 = CIRCLE('',#172816,0.64404917508); +#172816 = AXIS2_PLACEMENT_3D('',#172817,#172818,#172819); +#172817 = CARTESIAN_POINT('',(140.04164953911,-99.52309953911,1.585)); +#172818 = DIRECTION('',(0.,0.,1.)); +#172819 = DIRECTION('',(-0.111964337363,0.993712225526,0.)); +#172820 = ORIENTED_EDGE('',*,*,#172821,.T.); +#172821 = EDGE_CURVE('',#172813,#172822,#172824,.T.); +#172822 = VERTEX_POINT('',#172823); +#172823 = CARTESIAN_POINT('',(139.40165,-100.195211,1.585)); +#172824 = LINE('',#172825,#172826); +#172825 = CARTESIAN_POINT('',(139.40165,-99.450989,1.585)); +#172826 = VECTOR('',#172827,1.); +#172827 = DIRECTION('',(0.,-1.,0.)); +#172828 = ORIENTED_EDGE('',*,*,#172829,.T.); +#172829 = EDGE_CURVE('',#172822,#172830,#172832,.T.); +#172830 = VERTEX_POINT('',#172831); +#172831 = CARTESIAN_POINT('',(139.969539,-100.7631,1.585)); +#172832 = CIRCLE('',#172833,0.64404917508); +#172833 = AXIS2_PLACEMENT_3D('',#172834,#172835,#172836); +#172834 = CARTESIAN_POINT('',(140.04164953911,-100.1231004608,1.585)); +#172835 = DIRECTION('',(0.,0.,1.)); +#172836 = DIRECTION('',(-0.993712225526,-0.111964337363,0.)); +#172837 = ORIENTED_EDGE('',*,*,#172838,.T.); +#172838 = EDGE_CURVE('',#172830,#172839,#172841,.T.); +#172839 = VERTEX_POINT('',#172840); +#172840 = CARTESIAN_POINT('',(142.813761,-100.7631,1.585)); +#172841 = LINE('',#172842,#172843); +#172842 = CARTESIAN_POINT('',(139.969539,-100.7631,1.585)); +#172843 = VECTOR('',#172844,1.); +#172844 = DIRECTION('',(1.,0.,0.)); +#172845 = ORIENTED_EDGE('',*,*,#172846,.T.); +#172846 = EDGE_CURVE('',#172839,#172847,#172849,.T.); +#172847 = VERTEX_POINT('',#172848); +#172848 = CARTESIAN_POINT('',(143.38165,-100.195211,1.585)); +#172849 = CIRCLE('',#172850,0.64404917508); +#172850 = AXIS2_PLACEMENT_3D('',#172851,#172852,#172853); +#172851 = CARTESIAN_POINT('',(142.74165046088,-100.1231004608,1.585)); +#172852 = DIRECTION('',(0.,0.,1.)); +#172853 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#172854 = ORIENTED_EDGE('',*,*,#172855,.T.); +#172855 = EDGE_CURVE('',#172847,#172786,#172856,.T.); +#172856 = LINE('',#172857,#172858); +#172857 = CARTESIAN_POINT('',(143.38165,-100.195211,1.585)); +#172858 = VECTOR('',#172859,1.); +#172859 = DIRECTION('',(0.,1.,0.)); +#172860 = PLANE('',#172861); +#172861 = AXIS2_PLACEMENT_3D('',#172862,#172863,#172864); +#172862 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172863 = DIRECTION('',(0.,0.,1.)); +#172864 = DIRECTION('',(1.,0.,-0.)); +#172865 = SHELL_BASED_SURFACE_MODEL('',(#172866)); +#172866 = OPEN_SHELL('',(#172867)); +#172867 = ADVANCED_FACE('',(#172868),#172904,.T.); +#172868 = FACE_BOUND('',#172869,.F.); +#172869 = EDGE_LOOP('',(#172870,#172881,#172889,#172898)); +#172870 = ORIENTED_EDGE('',*,*,#172871,.T.); +#172871 = EDGE_CURVE('',#172872,#172874,#172876,.T.); +#172872 = VERTEX_POINT('',#172873); +#172873 = CARTESIAN_POINT('',(134.629392,-100.4056,1.585)); +#172874 = VERTEX_POINT('',#172875); +#172875 = CARTESIAN_POINT('',(134.629392,-100.2856,1.585)); +#172876 = CIRCLE('',#172877,6.000000000043E-02); +#172877 = AXIS2_PLACEMENT_3D('',#172878,#172879,#172880); +#172878 = CARTESIAN_POINT('',(134.62939177441,-100.3456,1.585)); +#172879 = DIRECTION('',(0.,0.,-1.)); +#172880 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#172881 = ORIENTED_EDGE('',*,*,#172882,.T.); +#172882 = EDGE_CURVE('',#172874,#172883,#172885,.T.); +#172883 = VERTEX_POINT('',#172884); +#172884 = CARTESIAN_POINT('',(135.103908,-100.2856,1.585)); +#172885 = LINE('',#172886,#172887); +#172886 = CARTESIAN_POINT('',(134.629392,-100.2856,1.585)); +#172887 = VECTOR('',#172888,1.); +#172888 = DIRECTION('',(1.,0.,0.)); +#172889 = ORIENTED_EDGE('',*,*,#172890,.T.); +#172890 = EDGE_CURVE('',#172883,#172891,#172893,.T.); +#172891 = VERTEX_POINT('',#172892); +#172892 = CARTESIAN_POINT('',(135.103908,-100.4056,1.585)); +#172893 = CIRCLE('',#172894,6.000000000043E-02); +#172894 = AXIS2_PLACEMENT_3D('',#172895,#172896,#172897); +#172895 = CARTESIAN_POINT('',(135.10390822558,-100.3456,1.585)); +#172896 = DIRECTION('',(0.,0.,-1.)); +#172897 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#172898 = ORIENTED_EDGE('',*,*,#172899,.T.); +#172899 = EDGE_CURVE('',#172891,#172872,#172900,.T.); +#172900 = LINE('',#172901,#172902); +#172901 = CARTESIAN_POINT('',(135.103908,-100.4056,1.585)); +#172902 = VECTOR('',#172903,1.); +#172903 = DIRECTION('',(-1.,0.,0.)); +#172904 = PLANE('',#172905); +#172905 = AXIS2_PLACEMENT_3D('',#172906,#172907,#172908); +#172906 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172907 = DIRECTION('',(0.,0.,1.)); +#172908 = DIRECTION('',(1.,0.,-0.)); +#172909 = SHELL_BASED_SURFACE_MODEL('',(#172910)); +#172910 = OPEN_SHELL('',(#172911)); +#172911 = ADVANCED_FACE('',(#172912),#172998,.T.); +#172912 = FACE_BOUND('',#172913,.F.); +#172913 = EDGE_LOOP('',(#172914,#172925,#172933,#172942,#172950,#172958, + #172966,#172975,#172983,#172992)); +#172914 = ORIENTED_EDGE('',*,*,#172915,.T.); +#172915 = EDGE_CURVE('',#172916,#172918,#172920,.T.); +#172916 = VERTEX_POINT('',#172917); +#172917 = CARTESIAN_POINT('',(90.62165,-96.6731,1.585)); +#172918 = VERTEX_POINT('',#172919); +#172919 = CARTESIAN_POINT('',(90.68165,-96.6131,1.585)); +#172920 = CIRCLE('',#172921,5.999932016257E-02); +#172921 = AXIS2_PLACEMENT_3D('',#172922,#172923,#172924); +#172922 = CARTESIAN_POINT('',(90.681649320159,-96.67309932015,1.585)); +#172923 = DIRECTION('',(0.,0.,-1.)); +#172924 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#172925 = ORIENTED_EDGE('',*,*,#172926,.T.); +#172926 = EDGE_CURVE('',#172918,#172927,#172929,.T.); +#172927 = VERTEX_POINT('',#172928); +#172928 = CARTESIAN_POINT('',(96.19165,-96.6131,1.585)); +#172929 = LINE('',#172930,#172931); +#172930 = CARTESIAN_POINT('',(90.68165,-96.6131,1.585)); +#172931 = VECTOR('',#172932,1.); +#172932 = DIRECTION('',(1.,0.,0.)); +#172933 = ORIENTED_EDGE('',*,*,#172934,.T.); +#172934 = EDGE_CURVE('',#172927,#172935,#172937,.T.); +#172935 = VERTEX_POINT('',#172936); +#172936 = CARTESIAN_POINT('',(96.19165,-96.7331,1.585)); +#172937 = CIRCLE('',#172938,6.000000000042E-02); +#172938 = AXIS2_PLACEMENT_3D('',#172939,#172940,#172941); +#172939 = CARTESIAN_POINT('',(96.191650225588,-96.6731,1.585)); +#172940 = DIRECTION('',(0.,0.,-1.)); +#172941 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#172942 = ORIENTED_EDGE('',*,*,#172943,.T.); +#172943 = EDGE_CURVE('',#172935,#172944,#172946,.T.); +#172944 = VERTEX_POINT('',#172945); +#172945 = CARTESIAN_POINT('',(90.74165,-96.7331,1.585)); +#172946 = LINE('',#172947,#172948); +#172947 = CARTESIAN_POINT('',(96.19165,-96.7331,1.585)); +#172948 = VECTOR('',#172949,1.); +#172949 = DIRECTION('',(-1.,0.,0.)); +#172950 = ORIENTED_EDGE('',*,*,#172951,.T.); +#172951 = EDGE_CURVE('',#172944,#172952,#172954,.T.); +#172952 = VERTEX_POINT('',#172953); +#172953 = CARTESIAN_POINT('',(90.74165,-99.9131,1.585)); +#172954 = LINE('',#172955,#172956); +#172955 = CARTESIAN_POINT('',(90.74165,-96.7331,1.585)); +#172956 = VECTOR('',#172957,1.); +#172957 = DIRECTION('',(0.,-1.,0.)); +#172958 = ORIENTED_EDGE('',*,*,#172959,.T.); +#172959 = EDGE_CURVE('',#172952,#172960,#172962,.T.); +#172960 = VERTEX_POINT('',#172961); +#172961 = CARTESIAN_POINT('',(96.19165,-99.9131,1.585)); +#172962 = LINE('',#172963,#172964); +#172963 = CARTESIAN_POINT('',(90.74165,-99.9131,1.585)); +#172964 = VECTOR('',#172965,1.); +#172965 = DIRECTION('',(1.,0.,0.)); +#172966 = ORIENTED_EDGE('',*,*,#172967,.T.); +#172967 = EDGE_CURVE('',#172960,#172968,#172970,.T.); +#172968 = VERTEX_POINT('',#172969); +#172969 = CARTESIAN_POINT('',(96.19165,-100.0331,1.585)); +#172970 = CIRCLE('',#172971,6.000000000042E-02); +#172971 = AXIS2_PLACEMENT_3D('',#172972,#172973,#172974); +#172972 = CARTESIAN_POINT('',(96.191650225588,-99.9731,1.585)); +#172973 = DIRECTION('',(0.,0.,-1.)); +#172974 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#172975 = ORIENTED_EDGE('',*,*,#172976,.T.); +#172976 = EDGE_CURVE('',#172968,#172977,#172979,.T.); +#172977 = VERTEX_POINT('',#172978); +#172978 = CARTESIAN_POINT('',(90.68165,-100.0331,1.585)); +#172979 = LINE('',#172980,#172981); +#172980 = CARTESIAN_POINT('',(96.19165,-100.0331,1.585)); +#172981 = VECTOR('',#172982,1.); +#172982 = DIRECTION('',(-1.,0.,0.)); +#172983 = ORIENTED_EDGE('',*,*,#172984,.T.); +#172984 = EDGE_CURVE('',#172977,#172985,#172987,.T.); +#172985 = VERTEX_POINT('',#172986); +#172986 = CARTESIAN_POINT('',(90.62165,-99.9731,1.585)); +#172987 = CIRCLE('',#172988,5.999932016262E-02); +#172988 = AXIS2_PLACEMENT_3D('',#172989,#172990,#172991); +#172989 = CARTESIAN_POINT('',(90.681649320159,-99.97310067984,1.585)); +#172990 = DIRECTION('',(0.,0.,-1.)); +#172991 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#172992 = ORIENTED_EDGE('',*,*,#172993,.T.); +#172993 = EDGE_CURVE('',#172985,#172916,#172994,.T.); +#172994 = LINE('',#172995,#172996); +#172995 = CARTESIAN_POINT('',(90.62165,-99.9731,1.585)); +#172996 = VECTOR('',#172997,1.); +#172997 = DIRECTION('',(0.,1.,0.)); +#172998 = PLANE('',#172999); +#172999 = AXIS2_PLACEMENT_3D('',#173000,#173001,#173002); +#173000 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173001 = DIRECTION('',(0.,0.,1.)); +#173002 = DIRECTION('',(1.,0.,-0.)); +#173003 = SHELL_BASED_SURFACE_MODEL('',(#173004)); +#173004 = OPEN_SHELL('',(#173005)); +#173005 = ADVANCED_FACE('',(#173006),#173042,.T.); +#173006 = FACE_BOUND('',#173007,.F.); +#173007 = EDGE_LOOP('',(#173008,#173019,#173027,#173036)); +#173008 = ORIENTED_EDGE('',*,*,#173009,.T.); +#173009 = EDGE_CURVE('',#173010,#173012,#173014,.T.); +#173010 = VERTEX_POINT('',#173011); +#173011 = CARTESIAN_POINT('',(134.629392,-99.3606,1.585)); +#173012 = VERTEX_POINT('',#173013); +#173013 = CARTESIAN_POINT('',(134.629392,-99.2406,1.585)); +#173014 = CIRCLE('',#173015,6.000000000043E-02); +#173015 = AXIS2_PLACEMENT_3D('',#173016,#173017,#173018); +#173016 = CARTESIAN_POINT('',(134.62939177441,-99.3006,1.585)); +#173017 = DIRECTION('',(0.,0.,-1.)); +#173018 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#173019 = ORIENTED_EDGE('',*,*,#173020,.T.); +#173020 = EDGE_CURVE('',#173012,#173021,#173023,.T.); +#173021 = VERTEX_POINT('',#173022); +#173022 = CARTESIAN_POINT('',(135.103908,-99.2406,1.585)); +#173023 = LINE('',#173024,#173025); +#173024 = CARTESIAN_POINT('',(134.629392,-99.2406,1.585)); +#173025 = VECTOR('',#173026,1.); +#173026 = DIRECTION('',(1.,0.,0.)); +#173027 = ORIENTED_EDGE('',*,*,#173028,.T.); +#173028 = EDGE_CURVE('',#173021,#173029,#173031,.T.); +#173029 = VERTEX_POINT('',#173030); +#173030 = CARTESIAN_POINT('',(135.103908,-99.3606,1.585)); +#173031 = CIRCLE('',#173032,6.000000000043E-02); +#173032 = AXIS2_PLACEMENT_3D('',#173033,#173034,#173035); +#173033 = CARTESIAN_POINT('',(135.10390822558,-99.3006,1.585)); +#173034 = DIRECTION('',(0.,0.,-1.)); +#173035 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#173036 = ORIENTED_EDGE('',*,*,#173037,.T.); +#173037 = EDGE_CURVE('',#173029,#173010,#173038,.T.); +#173038 = LINE('',#173039,#173040); +#173039 = CARTESIAN_POINT('',(135.103908,-99.3606,1.585)); +#173040 = VECTOR('',#173041,1.); +#173041 = DIRECTION('',(-1.,0.,0.)); +#173042 = PLANE('',#173043); +#173043 = AXIS2_PLACEMENT_3D('',#173044,#173045,#173046); +#173044 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173045 = DIRECTION('',(0.,0.,1.)); +#173046 = DIRECTION('',(1.,0.,-0.)); +#173047 = SHELL_BASED_SURFACE_MODEL('',(#173048)); +#173048 = OPEN_SHELL('',(#173049)); +#173049 = ADVANCED_FACE('',(#173050),#173086,.T.); +#173050 = FACE_BOUND('',#173051,.F.); +#173051 = EDGE_LOOP('',(#173052,#173063,#173071,#173080)); +#173052 = ORIENTED_EDGE('',*,*,#173053,.T.); +#173053 = EDGE_CURVE('',#173054,#173056,#173058,.T.); +#173054 = VERTEX_POINT('',#173055); +#173055 = CARTESIAN_POINT('',(99.930398,-99.1181,1.585)); +#173056 = VERTEX_POINT('',#173057); +#173057 = CARTESIAN_POINT('',(99.930398,-98.9981,1.585)); +#173058 = CIRCLE('',#173059,6.000000000043E-02); +#173059 = AXIS2_PLACEMENT_3D('',#173060,#173061,#173062); +#173060 = CARTESIAN_POINT('',(99.930397774412,-99.0581,1.585)); +#173061 = DIRECTION('',(0.,0.,-1.)); +#173062 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#173063 = ORIENTED_EDGE('',*,*,#173064,.T.); +#173064 = EDGE_CURVE('',#173056,#173065,#173067,.T.); +#173065 = VERTEX_POINT('',#173066); +#173066 = CARTESIAN_POINT('',(100.452902,-98.9981,1.585)); +#173067 = LINE('',#173068,#173069); +#173068 = CARTESIAN_POINT('',(99.930398,-98.9981,1.585)); +#173069 = VECTOR('',#173070,1.); +#173070 = DIRECTION('',(1.,0.,0.)); +#173071 = ORIENTED_EDGE('',*,*,#173072,.T.); +#173072 = EDGE_CURVE('',#173065,#173073,#173075,.T.); +#173073 = VERTEX_POINT('',#173074); +#173074 = CARTESIAN_POINT('',(100.452902,-99.1181,1.585)); +#173075 = CIRCLE('',#173076,6.000000000043E-02); +#173076 = AXIS2_PLACEMENT_3D('',#173077,#173078,#173079); +#173077 = CARTESIAN_POINT('',(100.45290222558,-99.0581,1.585)); +#173078 = DIRECTION('',(0.,0.,-1.)); +#173079 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#173080 = ORIENTED_EDGE('',*,*,#173081,.T.); +#173081 = EDGE_CURVE('',#173073,#173054,#173082,.T.); +#173082 = LINE('',#173083,#173084); +#173083 = CARTESIAN_POINT('',(100.452902,-99.1181,1.585)); +#173084 = VECTOR('',#173085,1.); +#173085 = DIRECTION('',(-1.,0.,0.)); +#173086 = PLANE('',#173087); +#173087 = AXIS2_PLACEMENT_3D('',#173088,#173089,#173090); +#173088 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173089 = DIRECTION('',(0.,0.,1.)); +#173090 = DIRECTION('',(1.,0.,-0.)); +#173091 = SHELL_BASED_SURFACE_MODEL('',(#173092)); +#173092 = OPEN_SHELL('',(#173093)); +#173093 = ADVANCED_FACE('',(#173094,#173205),#173257,.T.); +#173094 = FACE_BOUND('',#173095,.F.); +#173095 = EDGE_LOOP('',(#173096,#173107,#173115,#173124,#173132,#173141, + #173149,#173157,#173166,#173174,#173182,#173190,#173199)); +#173096 = ORIENTED_EDGE('',*,*,#173097,.T.); +#173097 = EDGE_CURVE('',#173098,#173100,#173102,.T.); +#173098 = VERTEX_POINT('',#173099); +#173099 = CARTESIAN_POINT('',(133.578805,-97.833287,1.585)); +#173100 = VERTEX_POINT('',#173101); +#173101 = CARTESIAN_POINT('',(133.652364,-97.772919,1.585)); +#173102 = CIRCLE('',#173103,7.500074938989E-02); +#173103 = AXIS2_PLACEMENT_3D('',#173104,#173105,#173106); +#173104 = CARTESIAN_POINT('',(133.65236446611,-97.84791974938,1.585)); +#173105 = DIRECTION('',(0.,0.,-1.)); +#173106 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#173107 = ORIENTED_EDGE('',*,*,#173108,.T.); +#173108 = EDGE_CURVE('',#173100,#173109,#173111,.T.); +#173109 = VERTEX_POINT('',#173110); +#173110 = CARTESIAN_POINT('',(134.047948,-97.77436,1.585)); +#173111 = LINE('',#173112,#173113); +#173112 = CARTESIAN_POINT('',(133.652364,-97.772919,1.585)); +#173113 = VECTOR('',#173114,1.); +#173114 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#173115 = ORIENTED_EDGE('',*,*,#173116,.T.); +#173116 = EDGE_CURVE('',#173109,#173117,#173119,.T.); +#173117 = VERTEX_POINT('',#173118); +#173118 = CARTESIAN_POINT('',(134.297351,-98.023763,1.585)); +#173119 = CIRCLE('',#173120,0.347870264855); +#173120 = AXIS2_PLACEMENT_3D('',#173121,#173122,#173123); +#173121 = CARTESIAN_POINT('',(133.96062026502,-98.11109073497,1.585)); +#173122 = DIRECTION('',(0.,0.,-1.)); +#173123 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#173124 = ORIENTED_EDGE('',*,*,#173125,.T.); +#173125 = EDGE_CURVE('',#173117,#173126,#173128,.T.); +#173126 = VERTEX_POINT('',#173127); +#173127 = CARTESIAN_POINT('',(134.296129,-98.201062,1.585)); +#173128 = LINE('',#173129,#173130); +#173129 = CARTESIAN_POINT('',(134.297351,-98.023763,1.585)); +#173130 = VECTOR('',#173131,1.); +#173131 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#173132 = ORIENTED_EDGE('',*,*,#173133,.T.); +#173133 = EDGE_CURVE('',#173126,#173134,#173136,.T.); +#173134 = VERTEX_POINT('',#173135); +#173135 = CARTESIAN_POINT('',(134.047948,-98.445287,1.585)); +#173136 = CIRCLE('',#173137,0.348632345848); +#173137 = AXIS2_PLACEMENT_3D('',#173138,#173139,#173140); +#173138 = CARTESIAN_POINT('',(133.96017919403,-98.1078834593,1.585)); +#173139 = DIRECTION('',(0.,0.,-1.)); +#173140 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#173141 = ORIENTED_EDGE('',*,*,#173142,.T.); +#173142 = EDGE_CURVE('',#173134,#173143,#173145,.T.); +#173143 = VERTEX_POINT('',#173144); +#173144 = CARTESIAN_POINT('',(134.034431,-98.446618,1.585)); +#173145 = LINE('',#173146,#173147); +#173146 = CARTESIAN_POINT('',(134.047948,-98.445287,1.585)); +#173147 = VECTOR('',#173148,1.); +#173148 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#173149 = ORIENTED_EDGE('',*,*,#173150,.T.); +#173150 = EDGE_CURVE('',#173143,#173151,#173153,.T.); +#173151 = VERTEX_POINT('',#173152); +#173152 = CARTESIAN_POINT('',(134.292445,-98.817723,1.585)); +#173153 = LINE('',#173154,#173155); +#173154 = CARTESIAN_POINT('',(134.034431,-98.446618,1.585)); +#173155 = VECTOR('',#173156,1.); +#173156 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#173157 = ORIENTED_EDGE('',*,*,#173158,.T.); +#173158 = EDGE_CURVE('',#173151,#173159,#173161,.T.); +#173159 = VERTEX_POINT('',#173160); +#173160 = CARTESIAN_POINT('',(134.16235,-98.890929,1.585)); +#173161 = CIRCLE('',#173162,7.500005951702E-02); +#173162 = AXIS2_PLACEMENT_3D('',#173163,#173164,#173165); +#173163 = CARTESIAN_POINT('',(134.22379206294,-98.84791874739,1.585)); +#173164 = DIRECTION('',(0.,0.,-1.)); +#173165 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#173166 = ORIENTED_EDGE('',*,*,#173167,.T.); +#173167 = EDGE_CURVE('',#173159,#173168,#173170,.T.); +#173168 = VERTEX_POINT('',#173169); +#173169 = CARTESIAN_POINT('',(133.85141,-98.446728,1.585)); +#173170 = LINE('',#173171,#173172); +#173171 = CARTESIAN_POINT('',(134.16235,-98.890929,1.585)); +#173172 = VECTOR('',#173173,1.); +#173173 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#173174 = ORIENTED_EDGE('',*,*,#173175,.T.); +#173175 = EDGE_CURVE('',#173168,#173176,#173178,.T.); +#173176 = VERTEX_POINT('',#173177); +#173177 = CARTESIAN_POINT('',(133.727364,-98.446728,1.585)); +#173178 = LINE('',#173179,#173180); +#173179 = CARTESIAN_POINT('',(133.85141,-98.446728,1.585)); +#173180 = VECTOR('',#173181,1.); +#173181 = DIRECTION('',(-1.,0.,0.)); +#173182 = ORIENTED_EDGE('',*,*,#173183,.T.); +#173183 = EDGE_CURVE('',#173176,#173184,#173186,.T.); +#173184 = VERTEX_POINT('',#173185); +#173185 = CARTESIAN_POINT('',(133.725923,-98.862551,1.585)); +#173186 = LINE('',#173187,#173188); +#173187 = CARTESIAN_POINT('',(133.727364,-98.446728,1.585)); +#173188 = VECTOR('',#173189,1.); +#173189 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#173190 = ORIENTED_EDGE('',*,*,#173191,.T.); +#173191 = EDGE_CURVE('',#173184,#173192,#173194,.T.); +#173192 = VERTEX_POINT('',#173193); +#173193 = CARTESIAN_POINT('',(133.577364,-98.847919,1.585)); +#173194 = CIRCLE('',#173195,7.500006711464E-02); +#173195 = AXIS2_PLACEMENT_3D('',#173196,#173197,#173198); +#173196 = CARTESIAN_POINT('',(133.65236406711,-98.84791906711,1.585)); +#173197 = DIRECTION('',(-0.,0.,-1.)); +#173198 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#173199 = ORIENTED_EDGE('',*,*,#173200,.T.); +#173200 = EDGE_CURVE('',#173192,#173098,#173201,.T.); +#173201 = LINE('',#173202,#173203); +#173202 = CARTESIAN_POINT('',(133.577364,-98.847919,1.585)); +#173203 = VECTOR('',#173204,1.); +#173204 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#173205 = FACE_BOUND('',#173206,.F.); +#173206 = EDGE_LOOP('',(#173207,#173218,#173226,#173234,#173242,#173251) + ); +#173207 = ORIENTED_EDGE('',*,*,#173208,.T.); +#173208 = EDGE_CURVE('',#173209,#173211,#173213,.T.); +#173209 = VERTEX_POINT('',#173210); +#173210 = CARTESIAN_POINT('',(134.148792,-98.0561,1.585)); +#173211 = VERTEX_POINT('',#173212); +#173212 = CARTESIAN_POINT('',(134.015611,-97.922919,1.585)); +#173213 = CIRCLE('',#173214,0.18686440374); +#173214 = AXIS2_PLACEMENT_3D('',#173215,#173216,#173217); +#173215 = CARTESIAN_POINT('',(133.968075,-98.103636,1.585)); +#173216 = DIRECTION('',(0.,0.,1.)); +#173217 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#173218 = ORIENTED_EDGE('',*,*,#173219,.T.); +#173219 = EDGE_CURVE('',#173211,#173220,#173222,.T.); +#173220 = VERTEX_POINT('',#173221); +#173221 = CARTESIAN_POINT('',(133.727364,-97.922919,1.585)); +#173222 = LINE('',#173223,#173224); +#173223 = CARTESIAN_POINT('',(134.015611,-97.922919,1.585)); +#173224 = VECTOR('',#173225,1.); +#173225 = DIRECTION('',(-1.,0.,0.)); +#173226 = ORIENTED_EDGE('',*,*,#173227,.T.); +#173227 = EDGE_CURVE('',#173220,#173228,#173230,.T.); +#173228 = VERTEX_POINT('',#173229); +#173229 = CARTESIAN_POINT('',(133.727364,-98.296728,1.585)); +#173230 = LINE('',#173231,#173232); +#173231 = CARTESIAN_POINT('',(133.727364,-97.922919,1.585)); +#173232 = VECTOR('',#173233,1.); +#173233 = DIRECTION('',(0.,-1.,0.)); +#173234 = ORIENTED_EDGE('',*,*,#173235,.T.); +#173235 = EDGE_CURVE('',#173228,#173236,#173238,.T.); +#173236 = VERTEX_POINT('',#173237); +#173237 = CARTESIAN_POINT('',(134.015611,-98.296728,1.585)); +#173238 = LINE('',#173239,#173240); +#173239 = CARTESIAN_POINT('',(133.727364,-98.296728,1.585)); +#173240 = VECTOR('',#173241,1.); +#173241 = DIRECTION('',(1.,0.,0.)); +#173242 = ORIENTED_EDGE('',*,*,#173243,.T.); +#173243 = EDGE_CURVE('',#173236,#173244,#173246,.T.); +#173244 = VERTEX_POINT('',#173245); +#173245 = CARTESIAN_POINT('',(134.148792,-98.163547,1.585)); +#173246 = CIRCLE('',#173247,0.18686440374); +#173247 = AXIS2_PLACEMENT_3D('',#173248,#173249,#173250); +#173248 = CARTESIAN_POINT('',(133.968075,-98.116011,1.585)); +#173249 = DIRECTION('',(0.,0.,1.)); +#173250 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#173251 = ORIENTED_EDGE('',*,*,#173252,.T.); +#173252 = EDGE_CURVE('',#173244,#173209,#173253,.T.); +#173253 = LINE('',#173254,#173255); +#173254 = CARTESIAN_POINT('',(134.148792,-98.163547,1.585)); +#173255 = VECTOR('',#173256,1.); +#173256 = DIRECTION('',(0.,1.,0.)); +#173257 = PLANE('',#173258); +#173258 = AXIS2_PLACEMENT_3D('',#173259,#173260,#173261); +#173259 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173260 = DIRECTION('',(0.,0.,1.)); +#173261 = DIRECTION('',(1.,0.,-0.)); +#173262 = SHELL_BASED_SURFACE_MODEL('',(#173263)); +#173263 = OPEN_SHELL('',(#173264)); +#173264 = ADVANCED_FACE('',(#173265),#173326,.T.); +#173265 = FACE_BOUND('',#173266,.F.); +#173266 = EDGE_LOOP('',(#173267,#173278,#173286,#173295,#173303,#173312, + #173320)); +#173267 = ORIENTED_EDGE('',*,*,#173268,.T.); +#173268 = EDGE_CURVE('',#173269,#173271,#173273,.T.); +#173269 = VERTEX_POINT('',#173270); +#173270 = CARTESIAN_POINT('',(135.494875,-97.921478,1.585)); +#173271 = VERTEX_POINT('',#173272); +#173272 = CARTESIAN_POINT('',(135.509507,-97.772919,1.585)); +#173273 = CIRCLE('',#173274,7.500006711463E-02); +#173274 = AXIS2_PLACEMENT_3D('',#173275,#173276,#173277); +#173275 = CARTESIAN_POINT('',(135.50950693288,-97.84791906711,1.585)); +#173276 = DIRECTION('',(0.,0.,-1.)); +#173277 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#173278 = ORIENTED_EDGE('',*,*,#173279,.T.); +#173279 = EDGE_CURVE('',#173271,#173280,#173282,.T.); +#173280 = VERTEX_POINT('',#173281); +#173281 = CARTESIAN_POINT('',(136.190805,-97.77436,1.585)); +#173282 = LINE('',#173283,#173284); +#173283 = CARTESIAN_POINT('',(135.509507,-97.772919,1.585)); +#173284 = VECTOR('',#173285,1.); +#173285 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#173286 = ORIENTED_EDGE('',*,*,#173287,.T.); +#173287 = EDGE_CURVE('',#173280,#173288,#173290,.T.); +#173288 = VERTEX_POINT('',#173289); +#173289 = CARTESIAN_POINT('',(136.245109,-97.877463,1.585)); +#173290 = CIRCLE('',#173291,7.500015546837E-02); +#173291 = AXIS2_PLACEMENT_3D('',#173292,#173293,#173294); +#173292 = CARTESIAN_POINT('',(136.17617297422,-97.84791900449,1.585)); +#173293 = DIRECTION('',(0.,0.,-1.)); +#173294 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#173295 = ORIENTED_EDGE('',*,*,#173296,.T.); +#173296 = EDGE_CURVE('',#173288,#173297,#173299,.T.); +#173297 = VERTEX_POINT('',#173298); +#173298 = CARTESIAN_POINT('',(135.80945,-98.890344,1.585)); +#173299 = LINE('',#173300,#173301); +#173300 = CARTESIAN_POINT('',(136.245109,-97.877463,1.585)); +#173301 = VECTOR('',#173302,1.); +#173302 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#173303 = ORIENTED_EDGE('',*,*,#173304,.T.); +#173304 = EDGE_CURVE('',#173297,#173305,#173307,.T.); +#173305 = VERTEX_POINT('',#173306); +#173306 = CARTESIAN_POINT('',(135.678666,-98.818375,1.585)); +#173307 = CIRCLE('',#173308,7.50003017842E-02); +#173308 = AXIS2_PLACEMENT_3D('',#173309,#173310,#173311); +#173309 = CARTESIAN_POINT('',(135.74760234698,-98.84791861745,1.585)); +#173310 = DIRECTION('',(-0.,0.,-1.)); +#173311 = DIRECTION('',(0.82463205542,-0.565669491111,-0.)); +#173312 = ORIENTED_EDGE('',*,*,#173313,.T.); +#173313 = EDGE_CURVE('',#173305,#173314,#173316,.T.); +#173314 = VERTEX_POINT('',#173315); +#173315 = CARTESIAN_POINT('',(136.062432,-97.922919,1.585)); +#173316 = LINE('',#173317,#173318); +#173317 = CARTESIAN_POINT('',(135.678666,-98.818375,1.585)); +#173318 = VECTOR('',#173319,1.); +#173319 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#173320 = ORIENTED_EDGE('',*,*,#173321,.T.); +#173321 = EDGE_CURVE('',#173314,#173269,#173322,.T.); +#173322 = LINE('',#173323,#173324); +#173323 = CARTESIAN_POINT('',(136.062432,-97.922919,1.585)); +#173324 = VECTOR('',#173325,1.); +#173325 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#173326 = PLANE('',#173327); +#173327 = AXIS2_PLACEMENT_3D('',#173328,#173329,#173330); +#173328 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173329 = DIRECTION('',(0.,0.,1.)); +#173330 = DIRECTION('',(1.,0.,-0.)); +#173331 = SHELL_BASED_SURFACE_MODEL('',(#173332)); +#173332 = OPEN_SHELL('',(#173333)); +#173333 = ADVANCED_FACE('',(#173334),#173570,.T.); +#173334 = FACE_BOUND('',#173335,.F.); +#173335 = EDGE_LOOP('',(#173336,#173347,#173355,#173364,#173372,#173380, + #173388,#173396,#173404,#173412,#173420,#173429,#173437,#173446, + #173454,#173462,#173470,#173479,#173487,#173496,#173504,#173513, + #173521,#173530,#173538,#173547,#173555,#173564)); +#173336 = ORIENTED_EDGE('',*,*,#173337,.T.); +#173337 = EDGE_CURVE('',#173338,#173340,#173342,.T.); +#173338 = VERTEX_POINT('',#173339); +#173339 = CARTESIAN_POINT('',(134.580626,-97.82604,1.585)); +#173340 = VERTEX_POINT('',#173341); +#173341 = CARTESIAN_POINT('',(134.652364,-97.772919,1.585)); +#173342 = CIRCLE('',#173343,7.50033610077E-02); +#173343 = AXIS2_PLACEMENT_3D('',#173344,#173345,#173346); +#173344 = CARTESIAN_POINT('',(134.6523662707,-97.84792236097,1.585)); +#173345 = DIRECTION('',(0.,0.,-1.)); +#173346 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#173347 = ORIENTED_EDGE('',*,*,#173348,.T.); +#173348 = EDGE_CURVE('',#173340,#173349,#173351,.T.); +#173349 = VERTEX_POINT('',#173350); +#173350 = CARTESIAN_POINT('',(135.143186,-97.77436,1.585)); +#173351 = LINE('',#173352,#173353); +#173352 = CARTESIAN_POINT('',(134.652364,-97.772919,1.585)); +#173353 = VECTOR('',#173354,1.); +#173354 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#173355 = ORIENTED_EDGE('',*,*,#173356,.T.); +#173356 = EDGE_CURVE('',#173349,#173357,#173359,.T.); +#173357 = VERTEX_POINT('',#173358); +#173358 = CARTESIAN_POINT('',(135.202113,-97.862551,1.585)); +#173359 = CIRCLE('',#173360,7.500063018462E-02); +#173360 = AXIS2_PLACEMENT_3D('',#173361,#173362,#173363); +#173361 = CARTESIAN_POINT('',(135.12855343069,-97.84791938039,1.585)); +#173362 = DIRECTION('',(0.,0.,-1.)); +#173363 = DIRECTION('',(0.195099284699,0.980783497572,0.)); +#173364 = ORIENTED_EDGE('',*,*,#173365,.T.); +#173365 = EDGE_CURVE('',#173357,#173366,#173368,.T.); +#173366 = VERTEX_POINT('',#173367); +#173367 = CARTESIAN_POINT('',(135.200211,-97.867141,1.585)); +#173368 = LINE('',#173369,#173370); +#173369 = CARTESIAN_POINT('',(135.202113,-97.862551,1.585)); +#173370 = VECTOR('',#173371,1.); +#173371 = DIRECTION('',(-0.382813948798,-0.923825460033,0.)); +#173372 = ORIENTED_EDGE('',*,*,#173373,.T.); +#173373 = EDGE_CURVE('',#173366,#173374,#173376,.T.); +#173374 = VERTEX_POINT('',#173375); +#173375 = CARTESIAN_POINT('',(135.148214,-97.88868,1.585)); +#173376 = LINE('',#173377,#173378); +#173377 = CARTESIAN_POINT('',(135.200211,-97.867141,1.585)); +#173378 = VECTOR('',#173379,1.); +#173379 = DIRECTION('',(-0.923872387372,-0.382700681801,0.)); +#173380 = ORIENTED_EDGE('',*,*,#173381,.T.); +#173381 = EDGE_CURVE('',#173374,#173382,#173384,.T.); +#173382 = VERTEX_POINT('',#173383); +#173383 = CARTESIAN_POINT('',(135.113975,-97.922919,1.585)); +#173384 = LINE('',#173385,#173386); +#173385 = CARTESIAN_POINT('',(135.148214,-97.88868,1.585)); +#173386 = VECTOR('',#173387,1.); +#173387 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#173388 = ORIENTED_EDGE('',*,*,#173389,.T.); +#173389 = EDGE_CURVE('',#173382,#173390,#173392,.T.); +#173390 = VERTEX_POINT('',#173391); +#173391 = CARTESIAN_POINT('',(134.720238,-97.922919,1.585)); +#173392 = LINE('',#173393,#173394); +#173393 = CARTESIAN_POINT('',(135.113975,-97.922919,1.585)); +#173394 = VECTOR('',#173395,1.); +#173395 = DIRECTION('',(-1.,0.,0.)); +#173396 = ORIENTED_EDGE('',*,*,#173397,.T.); +#173397 = EDGE_CURVE('',#173390,#173398,#173400,.T.); +#173398 = VERTEX_POINT('',#173399); +#173399 = CARTESIAN_POINT('',(134.695419,-98.171109,1.585)); +#173400 = LINE('',#173401,#173402); +#173401 = CARTESIAN_POINT('',(134.720238,-97.922919,1.585)); +#173402 = VECTOR('',#173403,1.); +#173403 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#173404 = ORIENTED_EDGE('',*,*,#173405,.T.); +#173405 = EDGE_CURVE('',#173398,#173406,#173408,.T.); +#173406 = VERTEX_POINT('',#173407); +#173407 = CARTESIAN_POINT('',(134.73297,-98.155312,1.585)); +#173408 = LINE('',#173409,#173410); +#173409 = CARTESIAN_POINT('',(134.695419,-98.171109,1.585)); +#173410 = VECTOR('',#173411,1.); +#173411 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#173412 = ORIENTED_EDGE('',*,*,#173413,.T.); +#173413 = EDGE_CURVE('',#173406,#173414,#173416,.T.); +#173414 = VERTEX_POINT('',#173415); +#173415 = CARTESIAN_POINT('',(135.005506,-98.156534,1.585)); +#173416 = LINE('',#173417,#173418); +#173417 = CARTESIAN_POINT('',(134.73297,-98.155312,1.585)); +#173418 = VECTOR('',#173419,1.); +#173419 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#173420 = ORIENTED_EDGE('',*,*,#173421,.T.); +#173421 = EDGE_CURVE('',#173414,#173422,#173424,.T.); +#173422 = VERTEX_POINT('',#173423); +#173423 = CARTESIAN_POINT('',(135.249732,-98.404715,1.585)); +#173424 = CIRCLE('',#173425,0.348625649748); +#173425 = AXIS2_PLACEMENT_3D('',#173426,#173427,#173428); +#173426 = CARTESIAN_POINT('',(134.91233404586,-98.49247868387,1.585)); +#173427 = DIRECTION('',(0.,0.,-1.)); +#173428 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#173429 = ORIENTED_EDGE('',*,*,#173430,.T.); +#173430 = EDGE_CURVE('',#173422,#173431,#173433,.T.); +#173431 = VERTEX_POINT('',#173432); +#173432 = CARTESIAN_POINT('',(135.24851,-98.677252,1.585)); +#173433 = LINE('',#173434,#173435); +#173434 = CARTESIAN_POINT('',(135.249732,-98.404715,1.585)); +#173435 = VECTOR('',#173436,1.); +#173436 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#173437 = ORIENTED_EDGE('',*,*,#173438,.T.); +#173438 = EDGE_CURVE('',#173431,#173439,#173441,.T.); +#173439 = VERTEX_POINT('',#173440); +#173440 = CARTESIAN_POINT('',(135.000329,-98.921478,1.585)); +#173441 = CIRCLE('',#173442,0.348635327447); +#173442 = AXIS2_PLACEMENT_3D('',#173443,#173444,#173445); +#173443 = CARTESIAN_POINT('',(134.91255748129,-98.58407208415,1.585)); +#173444 = DIRECTION('',(0.,0.,-1.)); +#173445 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#173446 = ORIENTED_EDGE('',*,*,#173447,.T.); +#173447 = EDGE_CURVE('',#173439,#173448,#173450,.T.); +#173448 = VERTEX_POINT('',#173449); +#173449 = CARTESIAN_POINT('',(134.727792,-98.920256,1.585)); +#173450 = LINE('',#173451,#173452); +#173451 = CARTESIAN_POINT('',(135.000329,-98.921478,1.585)); +#173452 = VECTOR('',#173453,1.); +#173453 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#173454 = ORIENTED_EDGE('',*,*,#173455,.T.); +#173455 = EDGE_CURVE('',#173448,#173456,#173458,.T.); +#173456 = VERTEX_POINT('',#173457); +#173457 = CARTESIAN_POINT('',(134.629996,-98.870681,1.585)); +#173458 = LINE('',#173459,#173460); +#173459 = CARTESIAN_POINT('',(134.727792,-98.920256,1.585)); +#173460 = VECTOR('',#173461,1.); +#173461 = DIRECTION('',(-0.891943732449,0.452146412288,0.)); +#173462 = ORIENTED_EDGE('',*,*,#173463,.T.); +#173463 = EDGE_CURVE('',#173456,#173464,#173466,.T.); +#173464 = VERTEX_POINT('',#173465); +#173465 = CARTESIAN_POINT('',(134.638868,-98.849264,1.585)); +#173466 = LINE('',#173467,#173468); +#173467 = CARTESIAN_POINT('',(134.629996,-98.870681,1.585)); +#173468 = VECTOR('',#173469,1.); +#173469 = DIRECTION('',(0.382712451158,0.923867512,0.)); +#173470 = ORIENTED_EDGE('',*,*,#173471,.T.); +#173471 = EDGE_CURVE('',#173464,#173472,#173474,.T.); +#173472 = VERTEX_POINT('',#173473); +#173473 = CARTESIAN_POINT('',(134.575086,-98.69528,1.585)); +#173474 = CIRCLE('',#173475,0.149999366947); +#173475 = AXIS2_PLACEMENT_3D('',#173476,#173477,#173478); +#173476 = CARTESIAN_POINT('',(134.49175094324,-98.82,1.585)); +#173477 = DIRECTION('',(0.,-0.,1.)); +#173478 = DIRECTION('',(0.980784517629,-0.1950941567,-0.)); +#173479 = ORIENTED_EDGE('',*,*,#173480,.T.); +#173480 = EDGE_CURVE('',#173472,#173481,#173483,.T.); +#173481 = VERTEX_POINT('',#173482); +#173482 = CARTESIAN_POINT('',(134.563093,-98.690312,1.585)); +#173483 = LINE('',#173484,#173485); +#173484 = CARTESIAN_POINT('',(134.575086,-98.69528,1.585)); +#173485 = VECTOR('',#173486,1.); +#173486 = DIRECTION('',(-0.923870360728,0.382705574259,0.)); +#173487 = ORIENTED_EDGE('',*,*,#173488,.T.); +#173488 = EDGE_CURVE('',#173481,#173489,#173491,.T.); +#173489 = VERTEX_POINT('',#173490); +#173490 = CARTESIAN_POINT('',(134.657779,-98.699648,1.585)); +#173491 = CIRCLE('',#173492,7.499202309587E-02); +#173492 = AXIS2_PLACEMENT_3D('',#173493,#173494,#173495); +#173493 = CARTESIAN_POINT('',(134.60474765317,-98.752671389,1.585)); +#173494 = DIRECTION('',(0.,0.,-1.)); +#173495 = DIRECTION('',(-0.555454453052,0.831546962344,0.)); +#173496 = ORIENTED_EDGE('',*,*,#173497,.T.); +#173497 = EDGE_CURVE('',#173489,#173498,#173500,.T.); +#173498 = VERTEX_POINT('',#173499); +#173499 = CARTESIAN_POINT('',(134.696791,-98.738661,1.585)); +#173500 = LINE('',#173501,#173502); +#173501 = CARTESIAN_POINT('',(134.657779,-98.699648,1.585)); +#173502 = VECTOR('',#173503,1.); +#173503 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#173504 = ORIENTED_EDGE('',*,*,#173505,.T.); +#173505 = EDGE_CURVE('',#173498,#173506,#173508,.T.); +#173506 = VERTEX_POINT('',#173507); +#173507 = CARTESIAN_POINT('',(135.036507,-98.738661,1.585)); +#173508 = CIRCLE('',#173509,0.305620374329); +#173509 = AXIS2_PLACEMENT_3D('',#173510,#173511,#173512); +#173510 = CARTESIAN_POINT('',(134.866649,-98.48459,1.585)); +#173511 = DIRECTION('',(0.,0.,1.)); +#173512 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#173513 = ORIENTED_EDGE('',*,*,#173514,.T.); +#173514 = EDGE_CURVE('',#173506,#173515,#173517,.T.); +#173515 = VERTEX_POINT('',#173516); +#173516 = CARTESIAN_POINT('',(135.066914,-98.708253,1.585)); +#173517 = LINE('',#173518,#173519); +#173518 = CARTESIAN_POINT('',(135.036507,-98.738661,1.585)); +#173519 = VECTOR('',#173520,1.); +#173520 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#173521 = ORIENTED_EDGE('',*,*,#173522,.T.); +#173522 = EDGE_CURVE('',#173515,#173523,#173525,.T.); +#173523 = VERTEX_POINT('',#173524); +#173524 = CARTESIAN_POINT('',(135.066915,-98.368536,1.585)); +#173525 = CIRCLE('',#173526,0.305616146029); +#173526 = AXIS2_PLACEMENT_3D('',#173527,#173528,#173529); +#173527 = CARTESIAN_POINT('',(134.81284892049,-98.53839375212,1.585)); +#173528 = DIRECTION('',(0.,-0.,1.)); +#173529 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#173530 = ORIENTED_EDGE('',*,*,#173531,.T.); +#173531 = EDGE_CURVE('',#173523,#173532,#173534,.T.); +#173532 = VERTEX_POINT('',#173533); +#173533 = CARTESIAN_POINT('',(135.036508,-98.338129,1.585)); +#173534 = LINE('',#173535,#173536); +#173535 = CARTESIAN_POINT('',(135.066915,-98.368536,1.585)); +#173536 = VECTOR('',#173537,1.); +#173537 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#173538 = ORIENTED_EDGE('',*,*,#173539,.T.); +#173539 = EDGE_CURVE('',#173532,#173540,#173542,.T.); +#173540 = VERTEX_POINT('',#173541); +#173541 = CARTESIAN_POINT('',(134.696791,-98.338129,1.585)); +#173542 = CIRCLE('',#173543,0.305621483548); +#173543 = AXIS2_PLACEMENT_3D('',#173544,#173545,#173546); +#173544 = CARTESIAN_POINT('',(134.8666495,-98.592201,1.585)); +#173545 = DIRECTION('',(0.,0.,1.)); +#173546 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#173547 = ORIENTED_EDGE('',*,*,#173548,.T.); +#173548 = EDGE_CURVE('',#173540,#173549,#173551,.T.); +#173549 = VERTEX_POINT('',#173550); +#173550 = CARTESIAN_POINT('',(134.640001,-98.390306,1.585)); +#173551 = LINE('',#173552,#173553); +#173552 = CARTESIAN_POINT('',(134.696791,-98.338129,1.585)); +#173553 = VECTOR('',#173554,1.); +#173554 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#173555 = ORIENTED_EDGE('',*,*,#173556,.T.); +#173556 = EDGE_CURVE('',#173549,#173557,#173559,.T.); +#173557 = VERTEX_POINT('',#173558); +#173558 = CARTESIAN_POINT('',(134.530095,-98.331349,1.585)); +#173559 = CIRCLE('',#173560,7.500024172472E-02); +#173560 = AXIS2_PLACEMENT_3D('',#173561,#173562,#173563); +#173561 = CARTESIAN_POINT('',(134.60474497002,-98.32410895619,1.585)); +#173562 = DIRECTION('',(-0.,0.,-1.)); +#173563 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#173564 = ORIENTED_EDGE('',*,*,#173565,.T.); +#173565 = EDGE_CURVE('',#173557,#173338,#173566,.T.); +#173566 = LINE('',#173567,#173568); +#173567 = CARTESIAN_POINT('',(134.530095,-98.331349,1.585)); +#173568 = VECTOR('',#173569,1.); +#173569 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#173570 = PLANE('',#173571); +#173571 = AXIS2_PLACEMENT_3D('',#173572,#173573,#173574); +#173572 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173573 = DIRECTION('',(0.,0.,1.)); +#173574 = DIRECTION('',(1.,0.,-0.)); +#173575 = SHELL_BASED_SURFACE_MODEL('',(#173576)); +#173576 = OPEN_SHELL('',(#173577)); +#173577 = ADVANCED_FACE('',(#173578),#173737,.T.); +#173578 = FACE_BOUND('',#173579,.F.); +#173579 = EDGE_LOOP('',(#173580,#173591,#173599,#173607,#173615,#173623, + #173631,#173639,#173648,#173656,#173665,#173673,#173681,#173689, + #173698,#173706,#173714,#173722,#173731)); +#173580 = ORIENTED_EDGE('',*,*,#173581,.T.); +#173581 = EDGE_CURVE('',#173582,#173584,#173586,.T.); +#173582 = VERTEX_POINT('',#173583); +#173583 = CARTESIAN_POINT('',(89.778364,-97.635356,1.585)); +#173584 = VERTEX_POINT('',#173585); +#173585 = CARTESIAN_POINT('',(90.287759,-97.644686,1.585)); +#173586 = CIRCLE('',#173587,0.450326844012); +#173587 = AXIS2_PLACEMENT_3D('',#173588,#173589,#173590); +#173588 = CARTESIAN_POINT('',(90.026261030105,-98.01130989199,1.585)); +#173589 = DIRECTION('',(0.,0.,-1.)); +#173590 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#173591 = ORIENTED_EDGE('',*,*,#173592,.T.); +#173592 = EDGE_CURVE('',#173584,#173593,#173595,.T.); +#173593 = VERTEX_POINT('',#173594); +#173594 = CARTESIAN_POINT('',(90.351212,-97.710216,1.585)); +#173595 = LINE('',#173596,#173597); +#173596 = CARTESIAN_POINT('',(90.287759,-97.644686,1.585)); +#173597 = VECTOR('',#173598,1.); +#173598 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#173599 = ORIENTED_EDGE('',*,*,#173600,.T.); +#173600 = EDGE_CURVE('',#173593,#173601,#173603,.T.); +#173601 = VERTEX_POINT('',#173602); +#173602 = CARTESIAN_POINT('',(90.409273,-97.830663,1.585)); +#173603 = LINE('',#173604,#173605); +#173604 = CARTESIAN_POINT('',(90.351212,-97.710216,1.585)); +#173605 = VECTOR('',#173606,1.); +#173606 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#173607 = ORIENTED_EDGE('',*,*,#173608,.T.); +#173608 = EDGE_CURVE('',#173601,#173609,#173611,.T.); +#173609 = VERTEX_POINT('',#173610); +#173610 = CARTESIAN_POINT('',(90.408514,-97.956995,1.585)); +#173611 = LINE('',#173612,#173613); +#173612 = CARTESIAN_POINT('',(90.409273,-97.830663,1.585)); +#173613 = VECTOR('',#173614,1.); +#173614 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#173615 = ORIENTED_EDGE('',*,*,#173616,.T.); +#173616 = EDGE_CURVE('',#173609,#173617,#173619,.T.); +#173617 = VERTEX_POINT('',#173618); +#173618 = CARTESIAN_POINT('',(90.350456,-98.125058,1.585)); +#173619 = LINE('',#173620,#173621); +#173620 = CARTESIAN_POINT('',(90.408514,-97.956995,1.585)); +#173621 = VECTOR('',#173622,1.); +#173622 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#173623 = ORIENTED_EDGE('',*,*,#173624,.T.); +#173624 = EDGE_CURVE('',#173617,#173625,#173627,.T.); +#173625 = VERTEX_POINT('',#173626); +#173626 = CARTESIAN_POINT('',(89.897733,-98.579819,1.585)); +#173627 = LINE('',#173628,#173629); +#173628 = CARTESIAN_POINT('',(90.350456,-98.125058,1.585)); +#173629 = VECTOR('',#173630,1.); +#173630 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#173631 = ORIENTED_EDGE('',*,*,#173632,.T.); +#173632 = EDGE_CURVE('',#173625,#173633,#173635,.T.); +#173633 = VERTEX_POINT('',#173634); +#173634 = CARTESIAN_POINT('',(90.350346,-98.58126,1.585)); +#173635 = LINE('',#173636,#173637); +#173636 = CARTESIAN_POINT('',(89.897733,-98.579819,1.585)); +#173637 = VECTOR('',#173638,1.); +#173638 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#173639 = ORIENTED_EDGE('',*,*,#173640,.T.); +#173640 = EDGE_CURVE('',#173633,#173641,#173643,.T.); +#173641 = VERTEX_POINT('',#173642); +#173642 = CARTESIAN_POINT('',(90.335714,-98.729819,1.585)); +#173643 = CIRCLE('',#173644,7.500006711464E-02); +#173644 = AXIS2_PLACEMENT_3D('',#173645,#173646,#173647); +#173645 = CARTESIAN_POINT('',(90.335714067115,-98.65481893288,1.585)); +#173646 = DIRECTION('',(0.,0.,-1.)); +#173647 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#173648 = ORIENTED_EDGE('',*,*,#173649,.T.); +#173649 = EDGE_CURVE('',#173641,#173650,#173652,.T.); +#173650 = VERTEX_POINT('',#173651); +#173651 = CARTESIAN_POINT('',(89.702035,-98.728378,1.585)); +#173652 = LINE('',#173653,#173654); +#173653 = CARTESIAN_POINT('',(90.335714,-98.729819,1.585)); +#173654 = VECTOR('',#173655,1.); +#173655 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#173656 = ORIENTED_EDGE('',*,*,#173657,.T.); +#173657 = EDGE_CURVE('',#173650,#173658,#173660,.T.); +#173658 = VERTEX_POINT('',#173659); +#173659 = CARTESIAN_POINT('',(89.663634,-98.601786,1.585)); +#173660 = CIRCLE('',#173661,7.50002101311E-02); +#173661 = AXIS2_PLACEMENT_3D('',#173662,#173663,#173664); +#173662 = CARTESIAN_POINT('',(89.716667316704,-98.65481899764,1.585)); +#173663 = DIRECTION('',(0.,0.,-1.)); +#173664 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#173665 = ORIENTED_EDGE('',*,*,#173666,.T.); +#173666 = EDGE_CURVE('',#173658,#173667,#173669,.T.); +#173667 = VERTEX_POINT('',#173668); +#173668 = CARTESIAN_POINT('',(90.222542,-98.042876,1.585)); +#173669 = LINE('',#173670,#173671); +#173670 = CARTESIAN_POINT('',(89.663634,-98.601786,1.585)); +#173671 = VECTOR('',#173672,1.); +#173672 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#173673 = ORIENTED_EDGE('',*,*,#173674,.T.); +#173674 = EDGE_CURVE('',#173667,#173675,#173677,.T.); +#173675 = VERTEX_POINT('',#173676); +#173676 = CARTESIAN_POINT('',(90.260714,-97.928363,1.585)); +#173677 = LINE('',#173678,#173679); +#173678 = CARTESIAN_POINT('',(90.222542,-98.042876,1.585)); +#173679 = VECTOR('',#173680,1.); +#173680 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#173681 = ORIENTED_EDGE('',*,*,#173682,.T.); +#173682 = EDGE_CURVE('',#173675,#173683,#173685,.T.); +#173683 = VERTEX_POINT('',#173684); +#173684 = CARTESIAN_POINT('',(90.260714,-97.863,1.585)); +#173685 = LINE('',#173686,#173687); +#173686 = CARTESIAN_POINT('',(90.260714,-97.928363,1.585)); +#173687 = VECTOR('',#173688,1.); +#173688 = DIRECTION('',(0.,1.,0.)); +#173689 = ORIENTED_EDGE('',*,*,#173690,.T.); +#173690 = EDGE_CURVE('',#173683,#173691,#173693,.T.); +#173691 = VERTEX_POINT('',#173692); +#173692 = CARTESIAN_POINT('',(90.127533,-97.729819,1.585)); +#173693 = CIRCLE('',#173694,0.18686440374); +#173694 = AXIS2_PLACEMENT_3D('',#173695,#173696,#173697); +#173695 = CARTESIAN_POINT('',(90.079997,-97.910536,1.585)); +#173696 = DIRECTION('',(0.,0.,1.)); +#173697 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#173698 = ORIENTED_EDGE('',*,*,#173699,.T.); +#173699 = EDGE_CURVE('',#173691,#173700,#173702,.T.); +#173700 = VERTEX_POINT('',#173701); +#173701 = CARTESIAN_POINT('',(89.924848,-97.729819,1.585)); +#173702 = LINE('',#173703,#173704); +#173703 = CARTESIAN_POINT('',(90.127533,-97.729819,1.585)); +#173704 = VECTOR('',#173705,1.); +#173705 = DIRECTION('',(-1.,0.,0.)); +#173706 = ORIENTED_EDGE('',*,*,#173707,.T.); +#173707 = EDGE_CURVE('',#173700,#173708,#173710,.T.); +#173708 = VERTEX_POINT('',#173709); +#173709 = CARTESIAN_POINT('',(89.856332,-97.764077,1.585)); +#173710 = LINE('',#173711,#173712); +#173711 = CARTESIAN_POINT('',(89.924848,-97.729819,1.585)); +#173712 = VECTOR('',#173713,1.); +#173713 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#173714 = ORIENTED_EDGE('',*,*,#173715,.T.); +#173715 = EDGE_CURVE('',#173708,#173716,#173718,.T.); +#173716 = VERTEX_POINT('',#173717); +#173717 = CARTESIAN_POINT('',(89.805954,-97.812417,1.585)); +#173718 = LINE('',#173719,#173720); +#173719 = CARTESIAN_POINT('',(89.856332,-97.764077,1.585)); +#173720 = VECTOR('',#173721,1.); +#173721 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#173722 = ORIENTED_EDGE('',*,*,#173723,.T.); +#173723 = EDGE_CURVE('',#173716,#173724,#173726,.T.); +#173724 = VERTEX_POINT('',#173725); +#173725 = CARTESIAN_POINT('',(89.711253,-97.697024,1.585)); +#173726 = CIRCLE('',#173727,7.499996838527E-02); +#173727 = AXIS2_PLACEMENT_3D('',#173728,#173729,#173730); +#173728 = CARTESIAN_POINT('',(89.764286,-97.75005697246,1.585)); +#173729 = DIRECTION('',(0.,0.,-1.)); +#173730 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#173731 = ORIENTED_EDGE('',*,*,#173732,.T.); +#173732 = EDGE_CURVE('',#173724,#173582,#173733,.T.); +#173733 = LINE('',#173734,#173735); +#173734 = CARTESIAN_POINT('',(89.711253,-97.697024,1.585)); +#173735 = VECTOR('',#173736,1.); +#173736 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#173737 = PLANE('',#173738); +#173738 = AXIS2_PLACEMENT_3D('',#173739,#173740,#173741); +#173739 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173740 = DIRECTION('',(0.,0.,1.)); +#173741 = DIRECTION('',(1.,0.,-0.)); +#173742 = SHELL_BASED_SURFACE_MODEL('',(#173743)); +#173743 = OPEN_SHELL('',(#173744)); +#173744 = ADVANCED_FACE('',(#173745,#173894),#173977,.T.); +#173745 = FACE_BOUND('',#173746,.F.); +#173746 = EDGE_LOOP('',(#173747,#173758,#173766,#173774,#173782,#173790, + #173798,#173806,#173814,#173822,#173830,#173838,#173846,#173855, + #173863,#173871,#173880,#173888)); +#173747 = ORIENTED_EDGE('',*,*,#173748,.T.); +#173748 = EDGE_CURVE('',#173749,#173751,#173753,.T.); +#173749 = VERTEX_POINT('',#173750); +#173750 = CARTESIAN_POINT('',(88.738346,-97.640187,1.585)); +#173751 = VERTEX_POINT('',#173752); +#173752 = CARTESIAN_POINT('',(88.811905,-97.579819,1.585)); +#173753 = CIRCLE('',#173754,7.500074938981E-02); +#173754 = AXIS2_PLACEMENT_3D('',#173755,#173756,#173757); +#173755 = CARTESIAN_POINT('',(88.81190546611,-97.65481974938,1.585)); +#173756 = DIRECTION('',(0.,0.,-1.)); +#173757 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#173758 = ORIENTED_EDGE('',*,*,#173759,.T.); +#173759 = EDGE_CURVE('',#173751,#173760,#173762,.T.); +#173760 = VERTEX_POINT('',#173761); +#173761 = CARTESIAN_POINT('',(89.057405,-97.580548,1.585)); +#173762 = LINE('',#173763,#173764); +#173763 = CARTESIAN_POINT('',(88.811905,-97.579819,1.585)); +#173764 = VECTOR('',#173765,1.); +#173765 = DIRECTION('',(0.999995591212,-2.969437010128E-03,0.)); +#173766 = ORIENTED_EDGE('',*,*,#173767,.T.); +#173767 = EDGE_CURVE('',#173760,#173768,#173770,.T.); +#173768 = VERTEX_POINT('',#173769); +#173769 = CARTESIAN_POINT('',(89.234525,-97.640078,1.585)); +#173770 = LINE('',#173771,#173772); +#173771 = CARTESIAN_POINT('',(89.057405,-97.580548,1.585)); +#173772 = VECTOR('',#173773,1.); +#173773 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#173774 = ORIENTED_EDGE('',*,*,#173775,.T.); +#173775 = EDGE_CURVE('',#173768,#173776,#173778,.T.); +#173776 = VERTEX_POINT('',#173777); +#173777 = CARTESIAN_POINT('',(89.351214,-97.75784,1.585)); +#173778 = LINE('',#173779,#173780); +#173779 = CARTESIAN_POINT('',(89.234525,-97.640078,1.585)); +#173780 = VECTOR('',#173781,1.); +#173781 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#173782 = ORIENTED_EDGE('',*,*,#173783,.T.); +#173783 = EDGE_CURVE('',#173776,#173784,#173786,.T.); +#173784 = VERTEX_POINT('',#173785); +#173785 = CARTESIAN_POINT('',(89.408475,-97.874724,1.585)); +#173786 = LINE('',#173787,#173788); +#173787 = CARTESIAN_POINT('',(89.351214,-97.75784,1.585)); +#173788 = VECTOR('',#173789,1.); +#173789 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#173790 = ORIENTED_EDGE('',*,*,#173791,.T.); +#173791 = EDGE_CURVE('',#173784,#173792,#173794,.T.); +#173792 = VERTEX_POINT('',#173793); +#173793 = CARTESIAN_POINT('',(89.458333,-98.08339,1.585)); +#173794 = LINE('',#173795,#173796); +#173795 = CARTESIAN_POINT('',(89.408475,-97.874724,1.585)); +#173796 = VECTOR('',#173797,1.); +#173797 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#173798 = ORIENTED_EDGE('',*,*,#173799,.T.); +#173799 = EDGE_CURVE('',#173792,#173800,#173802,.T.); +#173800 = VERTEX_POINT('',#173801); +#173801 = CARTESIAN_POINT('',(89.456094,-98.244437,1.585)); +#173802 = LINE('',#173803,#173804); +#173803 = CARTESIAN_POINT('',(89.458333,-98.08339,1.585)); +#173804 = VECTOR('',#173805,1.); +#173805 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#173806 = ORIENTED_EDGE('',*,*,#173807,.T.); +#173807 = EDGE_CURVE('',#173800,#173808,#173810,.T.); +#173808 = VERTEX_POINT('',#173809); +#173809 = CARTESIAN_POINT('',(89.402796,-98.450264,1.585)); +#173810 = LINE('',#173811,#173812); +#173811 = CARTESIAN_POINT('',(89.456094,-98.244437,1.585)); +#173812 = VECTOR('',#173813,1.); +#173813 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#173814 = ORIENTED_EDGE('',*,*,#173815,.T.); +#173815 = EDGE_CURVE('',#173808,#173816,#173818,.T.); +#173816 = VERTEX_POINT('',#173817); +#173817 = CARTESIAN_POINT('',(89.345846,-98.559244,1.585)); +#173818 = LINE('',#173819,#173820); +#173819 = CARTESIAN_POINT('',(89.402796,-98.450264,1.585)); +#173820 = VECTOR('',#173821,1.); +#173821 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#173822 = ORIENTED_EDGE('',*,*,#173823,.T.); +#173823 = EDGE_CURVE('',#173816,#173824,#173826,.T.); +#173824 = VERTEX_POINT('',#173825); +#173825 = CARTESIAN_POINT('',(89.229999,-98.672357,1.585)); +#173826 = LINE('',#173827,#173828); +#173827 = CARTESIAN_POINT('',(89.345846,-98.559244,1.585)); +#173828 = VECTOR('',#173829,1.); +#173829 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#173830 = ORIENTED_EDGE('',*,*,#173831,.T.); +#173831 = EDGE_CURVE('',#173824,#173832,#173834,.T.); +#173832 = VERTEX_POINT('',#173833); +#173833 = CARTESIAN_POINT('',(89.057405,-98.729089,1.585)); +#173834 = LINE('',#173835,#173836); +#173835 = CARTESIAN_POINT('',(89.229999,-98.672357,1.585)); +#173836 = VECTOR('',#173837,1.); +#173837 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#173838 = ORIENTED_EDGE('',*,*,#173839,.T.); +#173839 = EDGE_CURVE('',#173832,#173840,#173842,.T.); +#173840 = VERTEX_POINT('',#173841); +#173841 = CARTESIAN_POINT('',(88.797273,-98.728378,1.585)); +#173842 = LINE('',#173843,#173844); +#173843 = CARTESIAN_POINT('',(89.057405,-98.729089,1.585)); +#173844 = VECTOR('',#173845,1.); +#173845 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#173846 = ORIENTED_EDGE('',*,*,#173847,.T.); +#173847 = EDGE_CURVE('',#173840,#173848,#173850,.T.); +#173848 = VERTEX_POINT('',#173849); +#173849 = CARTESIAN_POINT('',(88.736905,-98.654819,1.585)); +#173850 = CIRCLE('',#173851,7.500074938985E-02); +#173851 = AXIS2_PLACEMENT_3D('',#173852,#173853,#173854); +#173852 = CARTESIAN_POINT('',(88.811905749388,-98.65481853389,1.585)); +#173853 = DIRECTION('',(0.,0.,-1.)); +#173854 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#173855 = ORIENTED_EDGE('',*,*,#173856,.T.); +#173856 = EDGE_CURVE('',#173848,#173857,#173859,.T.); +#173857 = VERTEX_POINT('',#173858); +#173858 = CARTESIAN_POINT('',(88.737998,-97.884807,1.585)); +#173859 = LINE('',#173860,#173861); +#173860 = CARTESIAN_POINT('',(88.736905,-98.654819,1.585)); +#173861 = VECTOR('',#173862,1.); +#173862 = DIRECTION('',(1.419456968062E-03,0.99999899257,0.)); +#173863 = ORIENTED_EDGE('',*,*,#173864,.T.); +#173864 = EDGE_CURVE('',#173857,#173865,#173867,.T.); +#173865 = VERTEX_POINT('',#173866); +#173866 = CARTESIAN_POINT('',(88.76637,-97.856436,1.585)); +#173867 = LINE('',#173868,#173869); +#173868 = CARTESIAN_POINT('',(88.737998,-97.884807,1.585)); +#173869 = VECTOR('',#173870,1.); +#173870 = DIRECTION('',(0.707119242645,0.707094319508,0.)); +#173871 = ORIENTED_EDGE('',*,*,#173872,.T.); +#173872 = EDGE_CURVE('',#173865,#173873,#173875,.T.); +#173873 = VERTEX_POINT('',#173874); +#173874 = CARTESIAN_POINT('',(88.76637,-97.689764,1.585)); +#173875 = CIRCLE('',#173876,0.149997657637); +#173876 = AXIS2_PLACEMENT_3D('',#173877,#173878,#173879); +#173877 = CARTESIAN_POINT('',(88.641652686043,-97.7731,1.585)); +#173878 = DIRECTION('',(0.,-0.,1.)); +#173879 = DIRECTION('',(0.831461743613,-0.555582009166,-0.)); +#173880 = ORIENTED_EDGE('',*,*,#173881,.T.); +#173881 = EDGE_CURVE('',#173873,#173882,#173884,.T.); +#173882 = VERTEX_POINT('',#173883); +#173883 = CARTESIAN_POINT('',(88.738315,-97.661709,1.585)); +#173884 = LINE('',#173885,#173886); +#173885 = CARTESIAN_POINT('',(88.76637,-97.689764,1.585)); +#173886 = VECTOR('',#173887,1.); +#173887 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#173888 = ORIENTED_EDGE('',*,*,#173889,.T.); +#173889 = EDGE_CURVE('',#173882,#173749,#173890,.T.); +#173890 = LINE('',#173891,#173892); +#173891 = CARTESIAN_POINT('',(88.738315,-97.661709,1.585)); +#173892 = VECTOR('',#173893,1.); +#173893 = DIRECTION('',(1.440385087305E-03,0.999998962645,0.)); +#173894 = FACE_BOUND('',#173895,.F.); +#173895 = EDGE_LOOP('',(#173896,#173906,#173914,#173922,#173930,#173938, + #173946,#173955,#173963,#173971)); +#173896 = ORIENTED_EDGE('',*,*,#173897,.T.); +#173897 = EDGE_CURVE('',#173898,#173900,#173902,.T.); +#173898 = VERTEX_POINT('',#173899); +#173899 = CARTESIAN_POINT('',(89.152343,-97.76799,1.585)); +#173900 = VERTEX_POINT('',#173901); +#173901 = CARTESIAN_POINT('',(89.03783,-97.729819,1.585)); +#173902 = LINE('',#173903,#173904); +#173903 = CARTESIAN_POINT('',(89.152343,-97.76799,1.585)); +#173904 = VECTOR('',#173905,1.); +#173905 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#173906 = ORIENTED_EDGE('',*,*,#173907,.T.); +#173907 = EDGE_CURVE('',#173900,#173908,#173910,.T.); +#173908 = VERTEX_POINT('',#173909); +#173909 = CARTESIAN_POINT('',(88.886905,-97.729819,1.585)); +#173910 = LINE('',#173911,#173912); +#173911 = CARTESIAN_POINT('',(89.03783,-97.729819,1.585)); +#173912 = VECTOR('',#173913,1.); +#173913 = DIRECTION('',(-1.,0.,0.)); +#173914 = ORIENTED_EDGE('',*,*,#173915,.T.); +#173915 = EDGE_CURVE('',#173908,#173916,#173918,.T.); +#173916 = VERTEX_POINT('',#173917); +#173917 = CARTESIAN_POINT('',(88.886905,-98.579819,1.585)); +#173918 = LINE('',#173919,#173920); +#173919 = CARTESIAN_POINT('',(88.886905,-97.729819,1.585)); +#173920 = VECTOR('',#173921,1.); +#173921 = DIRECTION('',(0.,-1.,0.)); +#173922 = ORIENTED_EDGE('',*,*,#173923,.T.); +#173923 = EDGE_CURVE('',#173916,#173924,#173926,.T.); +#173924 = VERTEX_POINT('',#173925); +#173925 = CARTESIAN_POINT('',(89.03783,-98.579819,1.585)); +#173926 = LINE('',#173927,#173928); +#173927 = CARTESIAN_POINT('',(88.886905,-98.579819,1.585)); +#173928 = VECTOR('',#173929,1.); +#173929 = DIRECTION('',(1.,0.,0.)); +#173930 = ORIENTED_EDGE('',*,*,#173931,.T.); +#173931 = EDGE_CURVE('',#173924,#173932,#173934,.T.); +#173932 = VERTEX_POINT('',#173933); +#173933 = CARTESIAN_POINT('',(89.152343,-98.541647,1.585)); +#173934 = LINE('',#173935,#173936); +#173935 = CARTESIAN_POINT('',(89.03783,-98.579819,1.585)); +#173936 = VECTOR('',#173937,1.); +#173937 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#173938 = ORIENTED_EDGE('',*,*,#173939,.T.); +#173939 = EDGE_CURVE('',#173932,#173940,#173942,.T.); +#173940 = VERTEX_POINT('',#173941); +#173941 = CARTESIAN_POINT('',(89.226455,-98.467534,1.585)); +#173942 = LINE('',#173943,#173944); +#173943 = CARTESIAN_POINT('',(89.152343,-98.541647,1.585)); +#173944 = VECTOR('',#173945,1.); +#173945 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#173946 = ORIENTED_EDGE('',*,*,#173947,.T.); +#173947 = EDGE_CURVE('',#173940,#173948,#173950,.T.); +#173948 = VERTEX_POINT('',#173949); +#173949 = CARTESIAN_POINT('',(89.308333,-98.092624,1.585)); +#173950 = CIRCLE('',#173951,0.611719141131); +#173951 = AXIS2_PLACEMENT_3D('',#173952,#173953,#173954); +#173952 = CARTESIAN_POINT('',(88.699920962242,-98.15614643649,1.585)); +#173953 = DIRECTION('',(0.,0.,1.)); +#173954 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#173955 = ORIENTED_EDGE('',*,*,#173956,.T.); +#173956 = EDGE_CURVE('',#173948,#173957,#173959,.T.); +#173957 = VERTEX_POINT('',#173958); +#173958 = CARTESIAN_POINT('',(89.264949,-97.91909,1.585)); +#173959 = LINE('',#173960,#173961); +#173960 = CARTESIAN_POINT('',(89.308333,-98.092624,1.585)); +#173961 = VECTOR('',#173962,1.); +#173962 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#173963 = ORIENTED_EDGE('',*,*,#173964,.T.); +#173964 = EDGE_CURVE('',#173957,#173965,#173967,.T.); +#173965 = VERTEX_POINT('',#173966); +#173966 = CARTESIAN_POINT('',(89.226456,-97.842103,1.585)); +#173967 = LINE('',#173968,#173969); +#173968 = CARTESIAN_POINT('',(89.264949,-97.91909,1.585)); +#173969 = VECTOR('',#173970,1.); +#173970 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#173971 = ORIENTED_EDGE('',*,*,#173972,.T.); +#173972 = EDGE_CURVE('',#173965,#173898,#173973,.T.); +#173973 = LINE('',#173974,#173975); +#173974 = CARTESIAN_POINT('',(89.226456,-97.842103,1.585)); +#173975 = VECTOR('',#173976,1.); +#173976 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#173977 = PLANE('',#173978); +#173978 = AXIS2_PLACEMENT_3D('',#173979,#173980,#173981); +#173979 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173980 = DIRECTION('',(0.,0.,1.)); +#173981 = DIRECTION('',(1.,0.,-0.)); +#173982 = SHELL_BASED_SURFACE_MODEL('',(#173983)); +#173983 = OPEN_SHELL('',(#173984)); +#173984 = ADVANCED_FACE('',(#173985),#174071,.T.); +#173985 = FACE_BOUND('',#173986,.F.); +#173986 = EDGE_LOOP('',(#173987,#173998,#174006,#174015,#174023,#174032, + #174040,#174049,#174057,#174065)); +#173987 = ORIENTED_EDGE('',*,*,#173988,.T.); +#173988 = EDGE_CURVE('',#173989,#173991,#173993,.T.); +#173989 = VERTEX_POINT('',#173990); +#173990 = CARTESIAN_POINT('',(140.516648,-97.415559,1.585)); +#173991 = VERTEX_POINT('',#173992); +#173992 = CARTESIAN_POINT('',(140.633316,-97.477919,1.585)); +#173993 = CIRCLE('',#173994,7.500000000004E-02); +#173994 = AXIS2_PLACEMENT_3D('',#173995,#173996,#173997); +#173995 = CARTESIAN_POINT('',(140.558316,-97.47791906555,1.585)); +#173996 = DIRECTION('',(0.,0.,-1.)); +#173997 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#173998 = ORIENTED_EDGE('',*,*,#173999,.T.); +#173999 = EDGE_CURVE('',#173991,#174000,#174002,.T.); +#174000 = VERTEX_POINT('',#174001); +#174001 = CARTESIAN_POINT('',(140.631116,-98.208666,1.585)); +#174002 = LINE('',#174003,#174004); +#174003 = CARTESIAN_POINT('',(140.633316,-97.477919,1.585)); +#174004 = VECTOR('',#174005,1.); +#174005 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#174006 = ORIENTED_EDGE('',*,*,#174007,.T.); +#174007 = EDGE_CURVE('',#174000,#174008,#174010,.T.); +#174008 = VERTEX_POINT('',#174009); +#174009 = CARTESIAN_POINT('',(140.280007,-98.552189,1.585)); +#174010 = CIRCLE('',#174011,0.38184101318); +#174011 = AXIS2_PLACEMENT_3D('',#174012,#174013,#174014); +#174012 = CARTESIAN_POINT('',(140.25109350032,-98.17144424444,1.585)); +#174013 = DIRECTION('',(0.,0.,-1.)); +#174014 = DIRECTION('',(0.995237511316,-9.747972132576E-02,0.)); +#174015 = ORIENTED_EDGE('',*,*,#174016,.T.); +#174016 = EDGE_CURVE('',#174008,#174017,#174019,.T.); +#174017 = VERTEX_POINT('',#174018); +#174018 = CARTESIAN_POINT('',(140.162732,-98.551478,1.585)); +#174019 = LINE('',#174020,#174021); +#174020 = CARTESIAN_POINT('',(140.280007,-98.552189,1.585)); +#174021 = VECTOR('',#174022,1.); +#174022 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#174023 = ORIENTED_EDGE('',*,*,#174024,.T.); +#174024 = EDGE_CURVE('',#174017,#174025,#174027,.T.); +#174025 = VERTEX_POINT('',#174026); +#174026 = CARTESIAN_POINT('',(140.177364,-98.402919,1.585)); +#174027 = CIRCLE('',#174028,7.500006711464E-02); +#174028 = AXIS2_PLACEMENT_3D('',#174029,#174030,#174031); +#174029 = CARTESIAN_POINT('',(140.17736393288,-98.47791906711,1.585)); +#174030 = DIRECTION('',(0.,0.,-1.)); +#174031 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#174032 = ORIENTED_EDGE('',*,*,#174033,.T.); +#174033 = EDGE_CURVE('',#174025,#174034,#174036,.T.); +#174034 = VERTEX_POINT('',#174035); +#174035 = CARTESIAN_POINT('',(140.260432,-98.402919,1.585)); +#174036 = LINE('',#174037,#174038); +#174037 = CARTESIAN_POINT('',(140.177364,-98.402919,1.585)); +#174038 = VECTOR('',#174039,1.); +#174039 = DIRECTION('',(1.,0.,0.)); +#174040 = ORIENTED_EDGE('',*,*,#174041,.T.); +#174041 = EDGE_CURVE('',#174034,#174042,#174044,.T.); +#174042 = VERTEX_POINT('',#174043); +#174043 = CARTESIAN_POINT('',(140.483316,-98.180034,1.585)); +#174044 = CIRCLE('',#174045,0.239437351684); +#174045 = AXIS2_PLACEMENT_3D('',#174046,#174047,#174048); +#174046 = CARTESIAN_POINT('',(140.24441490658,-98.16401797844,1.585)); +#174047 = DIRECTION('',(0.,0.,1.)); +#174048 = DIRECTION('',(6.689471506024E-02,-0.997760039838,0.)); +#174049 = ORIENTED_EDGE('',*,*,#174050,.T.); +#174050 = EDGE_CURVE('',#174042,#174051,#174053,.T.); +#174051 = VERTEX_POINT('',#174052); +#174052 = CARTESIAN_POINT('',(140.484757,-97.463287,1.585)); +#174053 = LINE('',#174054,#174055); +#174054 = CARTESIAN_POINT('',(140.483316,-98.180034,1.585)); +#174055 = VECTOR('',#174056,1.); +#174056 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#174057 = ORIENTED_EDGE('',*,*,#174058,.T.); +#174058 = EDGE_CURVE('',#174051,#174059,#174061,.T.); +#174059 = VERTEX_POINT('',#174060); +#174060 = CARTESIAN_POINT('',(140.495956,-97.436251,1.585)); +#174061 = LINE('',#174062,#174063); +#174062 = CARTESIAN_POINT('',(140.484757,-97.463287,1.585)); +#174063 = VECTOR('',#174064,1.); +#174064 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#174065 = ORIENTED_EDGE('',*,*,#174066,.T.); +#174066 = EDGE_CURVE('',#174059,#173989,#174067,.T.); +#174067 = LINE('',#174068,#174069); +#174068 = CARTESIAN_POINT('',(140.495956,-97.436251,1.585)); +#174069 = VECTOR('',#174070,1.); +#174070 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#174071 = PLANE('',#174072); +#174072 = AXIS2_PLACEMENT_3D('',#174073,#174074,#174075); +#174073 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174074 = DIRECTION('',(0.,0.,1.)); +#174075 = DIRECTION('',(1.,0.,-0.)); +#174076 = SHELL_BASED_SURFACE_MODEL('',(#174077)); +#174077 = OPEN_SHELL('',(#174078)); +#174078 = ADVANCED_FACE('',(#174079,#174157),#174209,.T.); +#174079 = FACE_BOUND('',#174080,.F.); +#174080 = EDGE_LOOP('',(#174081,#174092,#174100,#174109,#174117,#174126, + #174134,#174142,#174151)); +#174081 = ORIENTED_EDGE('',*,*,#174082,.T.); +#174082 = EDGE_CURVE('',#174083,#174085,#174087,.T.); +#174083 = VERTEX_POINT('',#174084); +#174084 = CARTESIAN_POINT('',(140.960948,-97.463287,1.585)); +#174085 = VERTEX_POINT('',#174086); +#174086 = CARTESIAN_POINT('',(141.034507,-97.402919,1.585)); +#174087 = CIRCLE('',#174088,7.500074938991E-02); +#174088 = AXIS2_PLACEMENT_3D('',#174089,#174090,#174091); +#174089 = CARTESIAN_POINT('',(141.03450746611,-97.47791974938,1.585)); +#174090 = DIRECTION('',(0.,0.,-1.)); +#174091 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#174092 = ORIENTED_EDGE('',*,*,#174093,.T.); +#174093 = EDGE_CURVE('',#174085,#174094,#174096,.T.); +#174094 = VERTEX_POINT('',#174095); +#174095 = CARTESIAN_POINT('',(141.430091,-97.40436,1.585)); +#174096 = LINE('',#174097,#174098); +#174097 = CARTESIAN_POINT('',(141.034507,-97.402919,1.585)); +#174098 = VECTOR('',#174099,1.); +#174099 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#174100 = ORIENTED_EDGE('',*,*,#174101,.T.); +#174101 = EDGE_CURVE('',#174094,#174102,#174104,.T.); +#174102 = VERTEX_POINT('',#174103); +#174103 = CARTESIAN_POINT('',(141.679494,-97.653763,1.585)); +#174104 = CIRCLE('',#174105,0.347870264855); +#174105 = AXIS2_PLACEMENT_3D('',#174106,#174107,#174108); +#174106 = CARTESIAN_POINT('',(141.34276326502,-97.74109073497,1.585)); +#174107 = DIRECTION('',(0.,0.,-1.)); +#174108 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#174109 = ORIENTED_EDGE('',*,*,#174110,.T.); +#174110 = EDGE_CURVE('',#174102,#174111,#174113,.T.); +#174111 = VERTEX_POINT('',#174112); +#174112 = CARTESIAN_POINT('',(141.678272,-97.831062,1.585)); +#174113 = LINE('',#174114,#174115); +#174114 = CARTESIAN_POINT('',(141.679494,-97.653763,1.585)); +#174115 = VECTOR('',#174116,1.); +#174116 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#174117 = ORIENTED_EDGE('',*,*,#174118,.T.); +#174118 = EDGE_CURVE('',#174111,#174119,#174121,.T.); +#174119 = VERTEX_POINT('',#174120); +#174120 = CARTESIAN_POINT('',(141.430091,-98.075287,1.585)); +#174121 = CIRCLE('',#174122,0.348632345849); +#174122 = AXIS2_PLACEMENT_3D('',#174123,#174124,#174125); +#174123 = CARTESIAN_POINT('',(141.34232219403,-97.7378834593,1.585)); +#174124 = DIRECTION('',(0.,0.,-1.)); +#174125 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#174126 = ORIENTED_EDGE('',*,*,#174127,.T.); +#174127 = EDGE_CURVE('',#174119,#174128,#174130,.T.); +#174128 = VERTEX_POINT('',#174129); +#174129 = CARTESIAN_POINT('',(141.109507,-98.076728,1.585)); +#174130 = LINE('',#174131,#174132); +#174131 = CARTESIAN_POINT('',(141.430091,-98.075287,1.585)); +#174132 = VECTOR('',#174133,1.); +#174133 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#174134 = ORIENTED_EDGE('',*,*,#174135,.T.); +#174135 = EDGE_CURVE('',#174128,#174136,#174138,.T.); +#174136 = VERTEX_POINT('',#174137); +#174137 = CARTESIAN_POINT('',(141.108066,-98.492551,1.585)); +#174138 = LINE('',#174139,#174140); +#174139 = CARTESIAN_POINT('',(141.109507,-98.076728,1.585)); +#174140 = VECTOR('',#174141,1.); +#174141 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#174142 = ORIENTED_EDGE('',*,*,#174143,.T.); +#174143 = EDGE_CURVE('',#174136,#174144,#174146,.T.); +#174144 = VERTEX_POINT('',#174145); +#174145 = CARTESIAN_POINT('',(140.959507,-98.477919,1.585)); +#174146 = CIRCLE('',#174147,7.500006711463E-02); +#174147 = AXIS2_PLACEMENT_3D('',#174148,#174149,#174150); +#174148 = CARTESIAN_POINT('',(141.03450706711,-98.47791906711,1.585)); +#174149 = DIRECTION('',(-0.,0.,-1.)); +#174150 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#174151 = ORIENTED_EDGE('',*,*,#174152,.T.); +#174152 = EDGE_CURVE('',#174144,#174083,#174153,.T.); +#174153 = LINE('',#174154,#174155); +#174154 = CARTESIAN_POINT('',(140.959507,-98.477919,1.585)); +#174155 = VECTOR('',#174156,1.); +#174156 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#174157 = FACE_BOUND('',#174158,.F.); +#174158 = EDGE_LOOP('',(#174159,#174170,#174178,#174186,#174194,#174203) + ); +#174159 = ORIENTED_EDGE('',*,*,#174160,.T.); +#174160 = EDGE_CURVE('',#174161,#174163,#174165,.T.); +#174161 = VERTEX_POINT('',#174162); +#174162 = CARTESIAN_POINT('',(141.530935,-97.6861,1.585)); +#174163 = VERTEX_POINT('',#174164); +#174164 = CARTESIAN_POINT('',(141.397754,-97.552919,1.585)); +#174165 = CIRCLE('',#174166,0.18686440374); +#174166 = AXIS2_PLACEMENT_3D('',#174167,#174168,#174169); +#174167 = CARTESIAN_POINT('',(141.350218,-97.733636,1.585)); +#174168 = DIRECTION('',(0.,0.,1.)); +#174169 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#174170 = ORIENTED_EDGE('',*,*,#174171,.T.); +#174171 = EDGE_CURVE('',#174163,#174172,#174174,.T.); +#174172 = VERTEX_POINT('',#174173); +#174173 = CARTESIAN_POINT('',(141.109507,-97.552919,1.585)); +#174174 = LINE('',#174175,#174176); +#174175 = CARTESIAN_POINT('',(141.397754,-97.552919,1.585)); +#174176 = VECTOR('',#174177,1.); +#174177 = DIRECTION('',(-1.,0.,0.)); +#174178 = ORIENTED_EDGE('',*,*,#174179,.T.); +#174179 = EDGE_CURVE('',#174172,#174180,#174182,.T.); +#174180 = VERTEX_POINT('',#174181); +#174181 = CARTESIAN_POINT('',(141.109507,-97.926728,1.585)); +#174182 = LINE('',#174183,#174184); +#174183 = CARTESIAN_POINT('',(141.109507,-97.552919,1.585)); +#174184 = VECTOR('',#174185,1.); +#174185 = DIRECTION('',(0.,-1.,0.)); +#174186 = ORIENTED_EDGE('',*,*,#174187,.T.); +#174187 = EDGE_CURVE('',#174180,#174188,#174190,.T.); +#174188 = VERTEX_POINT('',#174189); +#174189 = CARTESIAN_POINT('',(141.397754,-97.926728,1.585)); +#174190 = LINE('',#174191,#174192); +#174191 = CARTESIAN_POINT('',(141.109507,-97.926728,1.585)); +#174192 = VECTOR('',#174193,1.); +#174193 = DIRECTION('',(1.,0.,0.)); +#174194 = ORIENTED_EDGE('',*,*,#174195,.T.); +#174195 = EDGE_CURVE('',#174188,#174196,#174198,.T.); +#174196 = VERTEX_POINT('',#174197); +#174197 = CARTESIAN_POINT('',(141.530935,-97.793547,1.585)); +#174198 = CIRCLE('',#174199,0.18686440374); +#174199 = AXIS2_PLACEMENT_3D('',#174200,#174201,#174202); +#174200 = CARTESIAN_POINT('',(141.350218,-97.746011,1.585)); +#174201 = DIRECTION('',(0.,0.,1.)); +#174202 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#174203 = ORIENTED_EDGE('',*,*,#174204,.T.); +#174204 = EDGE_CURVE('',#174196,#174161,#174205,.T.); +#174205 = LINE('',#174206,#174207); +#174206 = CARTESIAN_POINT('',(141.530935,-97.793547,1.585)); +#174207 = VECTOR('',#174208,1.); +#174208 = DIRECTION('',(0.,1.,0.)); +#174209 = PLANE('',#174210); +#174210 = AXIS2_PLACEMENT_3D('',#174211,#174212,#174213); +#174211 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174212 = DIRECTION('',(0.,0.,1.)); +#174213 = DIRECTION('',(1.,0.,-0.)); +#174214 = SHELL_BASED_SURFACE_MODEL('',(#174215)); +#174215 = OPEN_SHELL('',(#174216)); +#174216 = ADVANCED_FACE('',(#174217),#174352,.T.); +#174217 = FACE_BOUND('',#174218,.F.); +#174218 = EDGE_LOOP('',(#174219,#174230,#174238,#174246,#174254,#174263, + #174271,#174279,#174288,#174296,#174304,#174313,#174321,#174329, + #174338,#174346)); +#174219 = ORIENTED_EDGE('',*,*,#174220,.T.); +#174220 = EDGE_CURVE('',#174221,#174223,#174225,.T.); +#174221 = VERTEX_POINT('',#174222); +#174222 = CARTESIAN_POINT('',(142.179,-97.371051,1.585)); +#174223 = VERTEX_POINT('',#174224); +#174224 = CARTESIAN_POINT('',(142.296134,-97.454018,1.585)); +#174225 = CIRCLE('',#174226,7.499955990672E-02); +#174226 = AXIS2_PLACEMENT_3D('',#174227,#174228,#174229); +#174227 = CARTESIAN_POINT('',(142.22498350095,-97.43030006435,1.585)); +#174228 = DIRECTION('',(0.,0.,-1.)); +#174229 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#174230 = ORIENTED_EDGE('',*,*,#174231,.T.); +#174231 = EDGE_CURVE('',#174223,#174232,#174234,.T.); +#174232 = VERTEX_POINT('',#174233); +#174233 = CARTESIAN_POINT('',(142.090945,-98.069585,1.585)); +#174234 = LINE('',#174235,#174236); +#174235 = CARTESIAN_POINT('',(142.296134,-97.454018,1.585)); +#174236 = VECTOR('',#174237,1.); +#174237 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#174238 = ORIENTED_EDGE('',*,*,#174239,.T.); +#174239 = EDGE_CURVE('',#174232,#174240,#174242,.T.); +#174240 = VERTEX_POINT('',#174241); +#174241 = CARTESIAN_POINT('',(142.388078,-98.069585,1.585)); +#174242 = LINE('',#174243,#174244); +#174243 = CARTESIAN_POINT('',(142.090945,-98.069585,1.585)); +#174244 = VECTOR('',#174245,1.); +#174245 = DIRECTION('',(1.,0.,0.)); +#174246 = ORIENTED_EDGE('',*,*,#174247,.T.); +#174247 = EDGE_CURVE('',#174240,#174248,#174250,.T.); +#174248 = VERTEX_POINT('',#174249); +#174249 = CARTESIAN_POINT('',(142.389519,-97.79662,1.585)); +#174250 = LINE('',#174251,#174252); +#174251 = CARTESIAN_POINT('',(142.388078,-98.069585,1.585)); +#174252 = VECTOR('',#174253,1.); +#174253 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#174254 = ORIENTED_EDGE('',*,*,#174255,.T.); +#174255 = EDGE_CURVE('',#174248,#174256,#174258,.T.); +#174256 = VERTEX_POINT('',#174257); +#174257 = CARTESIAN_POINT('',(142.538078,-97.811252,1.585)); +#174258 = CIRCLE('',#174259,7.500006711465E-02); +#174259 = AXIS2_PLACEMENT_3D('',#174260,#174261,#174262); +#174260 = CARTESIAN_POINT('',(142.46307793288,-97.81125193288,1.585)); +#174261 = DIRECTION('',(0.,0.,-1.)); +#174262 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#174263 = ORIENTED_EDGE('',*,*,#174264,.T.); +#174264 = EDGE_CURVE('',#174256,#174265,#174267,.T.); +#174265 = VERTEX_POINT('',#174266); +#174266 = CARTESIAN_POINT('',(142.538078,-98.069585,1.585)); +#174267 = LINE('',#174268,#174269); +#174268 = CARTESIAN_POINT('',(142.538078,-97.811252,1.585)); +#174269 = VECTOR('',#174270,1.); +#174270 = DIRECTION('',(0.,-1.,0.)); +#174271 = ORIENTED_EDGE('',*,*,#174272,.T.); +#174272 = EDGE_CURVE('',#174265,#174273,#174275,.T.); +#174273 = VERTEX_POINT('',#174274); +#174274 = CARTESIAN_POINT('',(142.620567,-98.071026,1.585)); +#174275 = LINE('',#174276,#174277); +#174276 = CARTESIAN_POINT('',(142.538078,-98.069585,1.585)); +#174277 = VECTOR('',#174278,1.); +#174278 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#174279 = ORIENTED_EDGE('',*,*,#174280,.T.); +#174280 = EDGE_CURVE('',#174273,#174281,#174283,.T.); +#174281 = VERTEX_POINT('',#174282); +#174282 = CARTESIAN_POINT('',(142.605935,-98.219585,1.585)); +#174283 = CIRCLE('',#174284,7.500006711462E-02); +#174284 = AXIS2_PLACEMENT_3D('',#174285,#174286,#174287); +#174285 = CARTESIAN_POINT('',(142.60593506711,-98.14458493288,1.585)); +#174286 = DIRECTION('',(0.,0.,-1.)); +#174287 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#174288 = ORIENTED_EDGE('',*,*,#174289,.T.); +#174289 = EDGE_CURVE('',#174281,#174290,#174292,.T.); +#174290 = VERTEX_POINT('',#174291); +#174291 = CARTESIAN_POINT('',(142.538078,-98.219585,1.585)); +#174292 = LINE('',#174293,#174294); +#174293 = CARTESIAN_POINT('',(142.605935,-98.219585,1.585)); +#174294 = VECTOR('',#174295,1.); +#174295 = DIRECTION('',(-1.,0.,0.)); +#174296 = ORIENTED_EDGE('',*,*,#174297,.T.); +#174297 = EDGE_CURVE('',#174290,#174298,#174300,.T.); +#174298 = VERTEX_POINT('',#174299); +#174299 = CARTESIAN_POINT('',(142.536637,-98.492551,1.585)); +#174300 = LINE('',#174301,#174302); +#174301 = CARTESIAN_POINT('',(142.538078,-98.219585,1.585)); +#174302 = VECTOR('',#174303,1.); +#174303 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#174304 = ORIENTED_EDGE('',*,*,#174305,.T.); +#174305 = EDGE_CURVE('',#174298,#174306,#174308,.T.); +#174306 = VERTEX_POINT('',#174307); +#174307 = CARTESIAN_POINT('',(142.388078,-98.477919,1.585)); +#174308 = CIRCLE('',#174309,7.500006711464E-02); +#174309 = AXIS2_PLACEMENT_3D('',#174310,#174311,#174312); +#174310 = CARTESIAN_POINT('',(142.46307806711,-98.47791906711,1.585)); +#174311 = DIRECTION('',(-0.,0.,-1.)); +#174312 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#174313 = ORIENTED_EDGE('',*,*,#174314,.T.); +#174314 = EDGE_CURVE('',#174306,#174315,#174317,.T.); +#174315 = VERTEX_POINT('',#174316); +#174316 = CARTESIAN_POINT('',(142.388078,-98.219585,1.585)); +#174317 = LINE('',#174318,#174319); +#174318 = CARTESIAN_POINT('',(142.388078,-98.477919,1.585)); +#174319 = VECTOR('',#174320,1.); +#174320 = DIRECTION('',(0.,1.,0.)); +#174321 = ORIENTED_EDGE('',*,*,#174322,.T.); +#174322 = EDGE_CURVE('',#174315,#174323,#174325,.T.); +#174323 = VERTEX_POINT('',#174324); +#174324 = CARTESIAN_POINT('',(141.972256,-98.218144,1.585)); +#174325 = LINE('',#174326,#174327); +#174326 = CARTESIAN_POINT('',(142.388078,-98.219585,1.585)); +#174327 = VECTOR('',#174328,1.); +#174328 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#174329 = ORIENTED_EDGE('',*,*,#174330,.T.); +#174330 = EDGE_CURVE('',#174323,#174331,#174333,.T.); +#174331 = VERTEX_POINT('',#174332); +#174332 = CARTESIAN_POINT('',(141.915737,-98.120868,1.585)); +#174333 = CIRCLE('',#174334,7.499997045039E-02); +#174334 = AXIS2_PLACEMENT_3D('',#174335,#174336,#174337); +#174335 = CARTESIAN_POINT('',(141.98688817257,-98.14458521335,1.585)); +#174336 = DIRECTION('',(0.,0.,-1.)); +#174337 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#174338 = ORIENTED_EDGE('',*,*,#174339,.T.); +#174339 = EDGE_CURVE('',#174331,#174340,#174342,.T.); +#174340 = VERTEX_POINT('',#174341); +#174341 = CARTESIAN_POINT('',(142.159826,-97.393158,1.585)); +#174342 = LINE('',#174343,#174344); +#174343 = CARTESIAN_POINT('',(141.915737,-98.120868,1.585)); +#174344 = VECTOR('',#174345,1.); +#174345 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#174346 = ORIENTED_EDGE('',*,*,#174347,.T.); +#174347 = EDGE_CURVE('',#174340,#174221,#174348,.T.); +#174348 = LINE('',#174349,#174350); +#174349 = CARTESIAN_POINT('',(142.159826,-97.393158,1.585)); +#174350 = VECTOR('',#174351,1.); +#174351 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#174352 = PLANE('',#174353); +#174353 = AXIS2_PLACEMENT_3D('',#174354,#174355,#174356); +#174354 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174355 = DIRECTION('',(0.,0.,1.)); +#174356 = DIRECTION('',(1.,0.,-0.)); +#174357 = SHELL_BASED_SURFACE_MODEL('',(#174358)); +#174358 = OPEN_SHELL('',(#174359)); +#174359 = ADVANCED_FACE('',(#174360),#174429,.T.); +#174360 = FACE_BOUND('',#174361,.F.); +#174361 = EDGE_LOOP('',(#174362,#174373,#174381,#174389,#174398,#174406, + #174415,#174423)); +#174362 = ORIENTED_EDGE('',*,*,#174363,.T.); +#174363 = EDGE_CURVE('',#174364,#174366,#174368,.T.); +#174364 = VERTEX_POINT('',#174365); +#174365 = CARTESIAN_POINT('',(207.386217,-96.900139,1.585)); +#174366 = VERTEX_POINT('',#174367); +#174367 = CARTESIAN_POINT('',(207.50165,-96.9231,1.585)); +#174368 = CIRCLE('',#174369,6.000007318649E-02); +#174369 = AXIS2_PLACEMENT_3D('',#174370,#174371,#174372); +#174370 = CARTESIAN_POINT('',(207.44164992681,-96.92309982331,1.585)); +#174371 = DIRECTION('',(0.,0.,-1.)); +#174372 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#174373 = ORIENTED_EDGE('',*,*,#174374,.T.); +#174374 = EDGE_CURVE('',#174366,#174375,#174377,.T.); +#174375 = VERTEX_POINT('',#174376); +#174376 = CARTESIAN_POINT('',(207.50165,-98.1131,1.585)); +#174377 = LINE('',#174378,#174379); +#174378 = CARTESIAN_POINT('',(207.50165,-96.9231,1.585)); +#174379 = VECTOR('',#174380,1.); +#174380 = DIRECTION('',(0.,-1.,0.)); +#174381 = ORIENTED_EDGE('',*,*,#174382,.T.); +#174382 = EDGE_CURVE('',#174375,#174383,#174385,.T.); +#174383 = VERTEX_POINT('',#174384); +#174384 = CARTESIAN_POINT('',(208.69165,-98.1131,1.585)); +#174385 = LINE('',#174386,#174387); +#174386 = CARTESIAN_POINT('',(207.50165,-98.1131,1.585)); +#174387 = VECTOR('',#174388,1.); +#174388 = DIRECTION('',(1.,0.,0.)); +#174389 = ORIENTED_EDGE('',*,*,#174390,.T.); +#174390 = EDGE_CURVE('',#174383,#174391,#174393,.T.); +#174391 = VERTEX_POINT('',#174392); +#174392 = CARTESIAN_POINT('',(208.69165,-98.2331,1.585)); +#174393 = CIRCLE('',#174394,6.000000000042E-02); +#174394 = AXIS2_PLACEMENT_3D('',#174395,#174396,#174397); +#174395 = CARTESIAN_POINT('',(208.69165022558,-98.1731,1.585)); +#174396 = DIRECTION('',(0.,0.,-1.)); +#174397 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#174398 = ORIENTED_EDGE('',*,*,#174399,.T.); +#174399 = EDGE_CURVE('',#174391,#174400,#174402,.T.); +#174400 = VERTEX_POINT('',#174401); +#174401 = CARTESIAN_POINT('',(207.44165,-98.2331,1.585)); +#174402 = LINE('',#174403,#174404); +#174403 = CARTESIAN_POINT('',(208.69165,-98.2331,1.585)); +#174404 = VECTOR('',#174405,1.); +#174405 = DIRECTION('',(-1.,0.,0.)); +#174406 = ORIENTED_EDGE('',*,*,#174407,.T.); +#174407 = EDGE_CURVE('',#174400,#174408,#174410,.T.); +#174408 = VERTEX_POINT('',#174409); +#174409 = CARTESIAN_POINT('',(207.38165,-98.1731,1.585)); +#174410 = CIRCLE('',#174411,5.999932016257E-02); +#174411 = AXIS2_PLACEMENT_3D('',#174412,#174413,#174414); +#174412 = CARTESIAN_POINT('',(207.44164932015,-98.17310067984,1.585)); +#174413 = DIRECTION('',(0.,0.,-1.)); +#174414 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#174415 = ORIENTED_EDGE('',*,*,#174416,.T.); +#174416 = EDGE_CURVE('',#174408,#174417,#174419,.T.); +#174417 = VERTEX_POINT('',#174418); +#174418 = CARTESIAN_POINT('',(207.38165,-96.9231,1.585)); +#174419 = LINE('',#174420,#174421); +#174420 = CARTESIAN_POINT('',(207.38165,-98.1731,1.585)); +#174421 = VECTOR('',#174422,1.); +#174422 = DIRECTION('',(0.,1.,0.)); +#174423 = ORIENTED_EDGE('',*,*,#174424,.T.); +#174424 = EDGE_CURVE('',#174417,#174364,#174425,.T.); +#174425 = LINE('',#174426,#174427); +#174426 = CARTESIAN_POINT('',(207.38165,-96.9231,1.585)); +#174427 = VECTOR('',#174428,1.); +#174428 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#174429 = PLANE('',#174430); +#174430 = AXIS2_PLACEMENT_3D('',#174431,#174432,#174433); +#174431 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174432 = DIRECTION('',(0.,0.,1.)); +#174433 = DIRECTION('',(1.,0.,-0.)); +#174434 = SHELL_BASED_SURFACE_MODEL('',(#174435)); +#174435 = OPEN_SHELL('',(#174436)); +#174436 = ADVANCED_FACE('',(#174437),#174531,.T.); +#174437 = FACE_BOUND('',#174438,.F.); +#174438 = EDGE_LOOP('',(#174439,#174450,#174458,#174467,#174475,#174484, + #174492,#174501,#174509,#174517,#174525)); +#174439 = ORIENTED_EDGE('',*,*,#174440,.T.); +#174440 = EDGE_CURVE('',#174441,#174443,#174445,.T.); +#174441 = VERTEX_POINT('',#174442); +#174442 = CARTESIAN_POINT('',(106.896217,-96.860139,1.585)); +#174443 = VERTEX_POINT('',#174444); +#174444 = CARTESIAN_POINT('',(107.01165,-96.8831,1.585)); +#174445 = CIRCLE('',#174446,6.000007318648E-02); +#174446 = AXIS2_PLACEMENT_3D('',#174447,#174448,#174449); +#174447 = CARTESIAN_POINT('',(106.95164992681,-96.88309982331,1.585)); +#174448 = DIRECTION('',(0.,0.,-1.)); +#174449 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#174450 = ORIENTED_EDGE('',*,*,#174451,.T.); +#174451 = EDGE_CURVE('',#174443,#174452,#174454,.T.); +#174452 = VERTEX_POINT('',#174453); +#174453 = CARTESIAN_POINT('',(107.01165,-97.8831,1.585)); +#174454 = LINE('',#174455,#174456); +#174455 = CARTESIAN_POINT('',(107.01165,-96.8831,1.585)); +#174456 = VECTOR('',#174457,1.); +#174457 = DIRECTION('',(0.,-1.,0.)); +#174458 = ORIENTED_EDGE('',*,*,#174459,.T.); +#174459 = EDGE_CURVE('',#174452,#174460,#174462,.T.); +#174460 = VERTEX_POINT('',#174461); +#174461 = CARTESIAN_POINT('',(106.95165,-97.9431,1.585)); +#174462 = CIRCLE('',#174463,5.999932016264E-02); +#174463 = AXIS2_PLACEMENT_3D('',#174464,#174465,#174466); +#174464 = CARTESIAN_POINT('',(106.95165067984,-97.88310067984,1.585)); +#174465 = DIRECTION('',(0.,0.,-1.)); +#174466 = DIRECTION('',(0.999999999936,1.133081517402E-05,0.)); +#174467 = ORIENTED_EDGE('',*,*,#174468,.T.); +#174468 = EDGE_CURVE('',#174460,#174469,#174471,.T.); +#174469 = VERTEX_POINT('',#174470); +#174470 = CARTESIAN_POINT('',(105.43165,-97.9431,1.585)); +#174471 = LINE('',#174472,#174473); +#174472 = CARTESIAN_POINT('',(106.95165,-97.9431,1.585)); +#174473 = VECTOR('',#174474,1.); +#174474 = DIRECTION('',(-1.,0.,0.)); +#174475 = ORIENTED_EDGE('',*,*,#174476,.T.); +#174476 = EDGE_CURVE('',#174469,#174477,#174479,.T.); +#174477 = VERTEX_POINT('',#174478); +#174478 = CARTESIAN_POINT('',(105.37165,-97.8831,1.585)); +#174479 = CIRCLE('',#174480,5.999932016257E-02); +#174480 = AXIS2_PLACEMENT_3D('',#174481,#174482,#174483); +#174481 = CARTESIAN_POINT('',(105.43164932015,-97.88310067984,1.585)); +#174482 = DIRECTION('',(0.,0.,-1.)); +#174483 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#174484 = ORIENTED_EDGE('',*,*,#174485,.T.); +#174485 = EDGE_CURVE('',#174477,#174486,#174488,.T.); +#174486 = VERTEX_POINT('',#174487); +#174487 = CARTESIAN_POINT('',(105.37165,-97.8331,1.585)); +#174488 = LINE('',#174489,#174490); +#174489 = CARTESIAN_POINT('',(105.37165,-97.8831,1.585)); +#174490 = VECTOR('',#174491,1.); +#174491 = DIRECTION('',(0.,1.,0.)); +#174492 = ORIENTED_EDGE('',*,*,#174493,.T.); +#174493 = EDGE_CURVE('',#174486,#174494,#174496,.T.); +#174494 = VERTEX_POINT('',#174495); +#174495 = CARTESIAN_POINT('',(105.487083,-97.810139,1.585)); +#174496 = CIRCLE('',#174497,6.000007318647E-02); +#174497 = AXIS2_PLACEMENT_3D('',#174498,#174499,#174500); +#174498 = CARTESIAN_POINT('',(105.43165007318,-97.83309982331,1.585)); +#174499 = DIRECTION('',(0.,0.,-1.)); +#174500 = DIRECTION('',(-0.999999999996,-2.944769485282E-06,-0.)); +#174501 = ORIENTED_EDGE('',*,*,#174502,.T.); +#174502 = EDGE_CURVE('',#174494,#174503,#174505,.T.); +#174503 = VERTEX_POINT('',#174504); +#174504 = CARTESIAN_POINT('',(105.489661,-97.8231,1.585)); +#174505 = LINE('',#174506,#174507); +#174506 = CARTESIAN_POINT('',(105.487083,-97.810139,1.585)); +#174507 = VECTOR('',#174508,1.); +#174508 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#174509 = ORIENTED_EDGE('',*,*,#174510,.T.); +#174510 = EDGE_CURVE('',#174503,#174511,#174513,.T.); +#174511 = VERTEX_POINT('',#174512); +#174512 = CARTESIAN_POINT('',(106.89165,-97.8231,1.585)); +#174513 = LINE('',#174514,#174515); +#174514 = CARTESIAN_POINT('',(105.489661,-97.8231,1.585)); +#174515 = VECTOR('',#174516,1.); +#174516 = DIRECTION('',(1.,0.,0.)); +#174517 = ORIENTED_EDGE('',*,*,#174518,.T.); +#174518 = EDGE_CURVE('',#174511,#174519,#174521,.T.); +#174519 = VERTEX_POINT('',#174520); +#174520 = CARTESIAN_POINT('',(106.89165,-96.8831,1.585)); +#174521 = LINE('',#174522,#174523); +#174522 = CARTESIAN_POINT('',(106.89165,-97.8231,1.585)); +#174523 = VECTOR('',#174524,1.); +#174524 = DIRECTION('',(0.,1.,0.)); +#174525 = ORIENTED_EDGE('',*,*,#174526,.T.); +#174526 = EDGE_CURVE('',#174519,#174441,#174527,.T.); +#174527 = LINE('',#174528,#174529); +#174528 = CARTESIAN_POINT('',(106.89165,-96.8831,1.585)); +#174529 = VECTOR('',#174530,1.); +#174530 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#174531 = PLANE('',#174532); +#174532 = AXIS2_PLACEMENT_3D('',#174533,#174534,#174535); +#174533 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174534 = DIRECTION('',(0.,0.,1.)); +#174535 = DIRECTION('',(1.,0.,-0.)); +#174536 = SHELL_BASED_SURFACE_MODEL('',(#174537)); +#174537 = OPEN_SHELL('',(#174538)); +#174538 = ADVANCED_FACE('',(#174539,#174609,#174793,#174877,#174911, + #174945),#174979,.T.); +#174539 = FACE_BOUND('',#174540,.F.); +#174540 = EDGE_LOOP('',(#174541,#174552,#174560,#174569,#174577,#174586, + #174594,#174603)); +#174541 = ORIENTED_EDGE('',*,*,#174542,.T.); +#174542 = EDGE_CURVE('',#174543,#174545,#174547,.T.); +#174543 = VERTEX_POINT('',#174544); +#174544 = CARTESIAN_POINT('',(207.67165,-85.2631,1.585)); +#174545 = VERTEX_POINT('',#174546); +#174546 = CARTESIAN_POINT('',(207.73165,-85.2031,1.585)); +#174547 = CIRCLE('',#174548,5.999932016262E-02); +#174548 = AXIS2_PLACEMENT_3D('',#174549,#174550,#174551); +#174549 = CARTESIAN_POINT('',(207.73164932015,-85.26309932015,1.585)); +#174550 = DIRECTION('',(0.,0.,-1.)); +#174551 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#174552 = ORIENTED_EDGE('',*,*,#174553,.T.); +#174553 = EDGE_CURVE('',#174545,#174554,#174556,.T.); +#174554 = VERTEX_POINT('',#174555); +#174555 = CARTESIAN_POINT('',(213.70165,-85.2031,1.585)); +#174556 = LINE('',#174557,#174558); +#174557 = CARTESIAN_POINT('',(207.73165,-85.2031,1.585)); +#174558 = VECTOR('',#174559,1.); +#174559 = DIRECTION('',(1.,0.,0.)); +#174560 = ORIENTED_EDGE('',*,*,#174561,.T.); +#174561 = EDGE_CURVE('',#174554,#174562,#174564,.T.); +#174562 = VERTEX_POINT('',#174563); +#174563 = CARTESIAN_POINT('',(213.76165,-85.2631,1.585)); +#174564 = CIRCLE('',#174565,5.999932016257E-02); +#174565 = AXIS2_PLACEMENT_3D('',#174566,#174567,#174568); +#174566 = CARTESIAN_POINT('',(213.70165067984,-85.26309932015,1.585)); +#174567 = DIRECTION('',(0.,0.,-1.)); +#174568 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#174569 = ORIENTED_EDGE('',*,*,#174570,.T.); +#174570 = EDGE_CURVE('',#174562,#174571,#174573,.T.); +#174571 = VERTEX_POINT('',#174572); +#174572 = CARTESIAN_POINT('',(213.76165,-97.8831,1.585)); +#174573 = LINE('',#174574,#174575); +#174574 = CARTESIAN_POINT('',(213.76165,-85.2631,1.585)); +#174575 = VECTOR('',#174576,1.); +#174576 = DIRECTION('',(0.,-1.,0.)); +#174577 = ORIENTED_EDGE('',*,*,#174578,.T.); +#174578 = EDGE_CURVE('',#174571,#174579,#174581,.T.); +#174579 = VERTEX_POINT('',#174580); +#174580 = CARTESIAN_POINT('',(213.70165,-97.9431,1.585)); +#174581 = CIRCLE('',#174582,5.999932016265E-02); +#174582 = AXIS2_PLACEMENT_3D('',#174583,#174584,#174585); +#174583 = CARTESIAN_POINT('',(213.70165067984,-97.88310067984,1.585)); +#174584 = DIRECTION('',(0.,0.,-1.)); +#174585 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#174586 = ORIENTED_EDGE('',*,*,#174587,.T.); +#174587 = EDGE_CURVE('',#174579,#174588,#174590,.T.); +#174588 = VERTEX_POINT('',#174589); +#174589 = CARTESIAN_POINT('',(207.73165,-97.9431,1.585)); +#174590 = LINE('',#174591,#174592); +#174591 = CARTESIAN_POINT('',(213.70165,-97.9431,1.585)); +#174592 = VECTOR('',#174593,1.); +#174593 = DIRECTION('',(-1.,0.,0.)); +#174594 = ORIENTED_EDGE('',*,*,#174595,.T.); +#174595 = EDGE_CURVE('',#174588,#174596,#174598,.T.); +#174596 = VERTEX_POINT('',#174597); +#174597 = CARTESIAN_POINT('',(207.67165,-97.8831,1.585)); +#174598 = CIRCLE('',#174599,5.999932016256E-02); +#174599 = AXIS2_PLACEMENT_3D('',#174600,#174601,#174602); +#174600 = CARTESIAN_POINT('',(207.73164932015,-97.88310067984,1.585)); +#174601 = DIRECTION('',(0.,0.,-1.)); +#174602 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#174603 = ORIENTED_EDGE('',*,*,#174604,.T.); +#174604 = EDGE_CURVE('',#174596,#174543,#174605,.T.); +#174605 = LINE('',#174606,#174607); +#174606 = CARTESIAN_POINT('',(207.67165,-97.8831,1.585)); +#174607 = VECTOR('',#174608,1.); +#174608 = DIRECTION('',(0.,1.,0.)); +#174609 = FACE_BOUND('',#174610,.F.); +#174610 = EDGE_LOOP('',(#174611,#174622,#174630,#174638,#174646,#174655, + #174663,#174671,#174679,#174688,#174696,#174705,#174713,#174721, + #174729,#174738,#174746,#174754,#174762,#174771,#174779,#174787)); +#174611 = ORIENTED_EDGE('',*,*,#174612,.T.); +#174612 = EDGE_CURVE('',#174613,#174615,#174617,.T.); +#174613 = VERTEX_POINT('',#174614); +#174614 = CARTESIAN_POINT('',(209.99165,-86.0831,1.585)); +#174615 = VERTEX_POINT('',#174616); +#174616 = CARTESIAN_POINT('',(209.93165,-86.0231,1.585)); +#174617 = CIRCLE('',#174618,5.999932016264E-02); +#174618 = AXIS2_PLACEMENT_3D('',#174619,#174620,#174621); +#174619 = CARTESIAN_POINT('',(209.99164932015,-86.02310067984,1.585)); +#174620 = DIRECTION('',(0.,0.,-1.)); +#174621 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#174622 = ORIENTED_EDGE('',*,*,#174623,.T.); +#174623 = EDGE_CURVE('',#174615,#174624,#174626,.T.); +#174624 = VERTEX_POINT('',#174625); +#174625 = CARTESIAN_POINT('',(209.93165,-85.3231,1.585)); +#174626 = LINE('',#174627,#174628); +#174627 = CARTESIAN_POINT('',(209.93165,-86.0231,1.585)); +#174628 = VECTOR('',#174629,1.); +#174629 = DIRECTION('',(0.,1.,0.)); +#174630 = ORIENTED_EDGE('',*,*,#174631,.T.); +#174631 = EDGE_CURVE('',#174624,#174632,#174634,.T.); +#174632 = VERTEX_POINT('',#174633); +#174633 = CARTESIAN_POINT('',(208.55165,-85.3231,1.585)); +#174634 = LINE('',#174635,#174636); +#174635 = CARTESIAN_POINT('',(209.93165,-85.3231,1.585)); +#174636 = VECTOR('',#174637,1.); +#174637 = DIRECTION('',(-1.,0.,0.)); +#174638 = ORIENTED_EDGE('',*,*,#174639,.T.); +#174639 = EDGE_CURVE('',#174632,#174640,#174642,.T.); +#174640 = VERTEX_POINT('',#174641); +#174641 = CARTESIAN_POINT('',(208.55165,-87.0731,1.585)); +#174642 = LINE('',#174643,#174644); +#174643 = CARTESIAN_POINT('',(208.55165,-85.3231,1.585)); +#174644 = VECTOR('',#174645,1.); +#174645 = DIRECTION('',(0.,-1.,0.)); +#174646 = ORIENTED_EDGE('',*,*,#174647,.T.); +#174647 = EDGE_CURVE('',#174640,#174648,#174650,.T.); +#174648 = VERTEX_POINT('',#174649); +#174649 = CARTESIAN_POINT('',(208.49165,-87.1331,1.585)); +#174650 = CIRCLE('',#174651,5.999932016262E-02); +#174651 = AXIS2_PLACEMENT_3D('',#174652,#174653,#174654); +#174652 = CARTESIAN_POINT('',(208.49165067984,-87.07310067984,1.585)); +#174653 = DIRECTION('',(0.,0.,-1.)); +#174654 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#174655 = ORIENTED_EDGE('',*,*,#174656,.T.); +#174656 = EDGE_CURVE('',#174648,#174657,#174659,.T.); +#174657 = VERTEX_POINT('',#174658); +#174658 = CARTESIAN_POINT('',(207.79165,-87.1331,1.585)); +#174659 = LINE('',#174660,#174661); +#174660 = CARTESIAN_POINT('',(208.49165,-87.1331,1.585)); +#174661 = VECTOR('',#174662,1.); +#174662 = DIRECTION('',(-1.,0.,0.)); +#174663 = ORIENTED_EDGE('',*,*,#174664,.T.); +#174664 = EDGE_CURVE('',#174657,#174665,#174667,.T.); +#174665 = VERTEX_POINT('',#174666); +#174666 = CARTESIAN_POINT('',(207.79165,-88.5131,1.585)); +#174667 = LINE('',#174668,#174669); +#174668 = CARTESIAN_POINT('',(207.79165,-87.1331,1.585)); +#174669 = VECTOR('',#174670,1.); +#174670 = DIRECTION('',(0.,-1.,0.)); +#174671 = ORIENTED_EDGE('',*,*,#174672,.T.); +#174672 = EDGE_CURVE('',#174665,#174673,#174675,.T.); +#174673 = VERTEX_POINT('',#174674); +#174674 = CARTESIAN_POINT('',(208.49165,-88.5131,1.585)); +#174675 = LINE('',#174676,#174677); +#174676 = CARTESIAN_POINT('',(207.79165,-88.5131,1.585)); +#174677 = VECTOR('',#174678,1.); +#174678 = DIRECTION('',(1.,0.,0.)); +#174679 = ORIENTED_EDGE('',*,*,#174680,.T.); +#174680 = EDGE_CURVE('',#174673,#174681,#174683,.T.); +#174681 = VERTEX_POINT('',#174682); +#174682 = CARTESIAN_POINT('',(208.55165,-88.5731,1.585)); +#174683 = CIRCLE('',#174684,5.999932016262E-02); +#174684 = AXIS2_PLACEMENT_3D('',#174685,#174686,#174687); +#174685 = CARTESIAN_POINT('',(208.49165067984,-88.57309932015,1.585)); +#174686 = DIRECTION('',(0.,0.,-1.)); +#174687 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#174688 = ORIENTED_EDGE('',*,*,#174689,.T.); +#174689 = EDGE_CURVE('',#174681,#174690,#174692,.T.); +#174690 = VERTEX_POINT('',#174691); +#174691 = CARTESIAN_POINT('',(208.55165,-94.5731,1.585)); +#174692 = LINE('',#174693,#174694); +#174693 = CARTESIAN_POINT('',(208.55165,-88.5731,1.585)); +#174694 = VECTOR('',#174695,1.); +#174695 = DIRECTION('',(0.,-1.,0.)); +#174696 = ORIENTED_EDGE('',*,*,#174697,.T.); +#174697 = EDGE_CURVE('',#174690,#174698,#174700,.T.); +#174698 = VERTEX_POINT('',#174699); +#174699 = CARTESIAN_POINT('',(208.49165,-94.6331,1.585)); +#174700 = CIRCLE('',#174701,5.999932016262E-02); +#174701 = AXIS2_PLACEMENT_3D('',#174702,#174703,#174704); +#174702 = CARTESIAN_POINT('',(208.49165067984,-94.57310067984,1.585)); +#174703 = DIRECTION('',(0.,0.,-1.)); +#174704 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#174705 = ORIENTED_EDGE('',*,*,#174706,.T.); +#174706 = EDGE_CURVE('',#174698,#174707,#174709,.T.); +#174707 = VERTEX_POINT('',#174708); +#174708 = CARTESIAN_POINT('',(207.79165,-94.6331,1.585)); +#174709 = LINE('',#174710,#174711); +#174710 = CARTESIAN_POINT('',(208.49165,-94.6331,1.585)); +#174711 = VECTOR('',#174712,1.); +#174712 = DIRECTION('',(-1.,0.,0.)); +#174713 = ORIENTED_EDGE('',*,*,#174714,.T.); +#174714 = EDGE_CURVE('',#174707,#174715,#174717,.T.); +#174715 = VERTEX_POINT('',#174716); +#174716 = CARTESIAN_POINT('',(207.79165,-96.0131,1.585)); +#174717 = LINE('',#174718,#174719); +#174718 = CARTESIAN_POINT('',(207.79165,-94.6331,1.585)); +#174719 = VECTOR('',#174720,1.); +#174720 = DIRECTION('',(0.,-1.,0.)); +#174721 = ORIENTED_EDGE('',*,*,#174722,.T.); +#174722 = EDGE_CURVE('',#174715,#174723,#174725,.T.); +#174723 = VERTEX_POINT('',#174724); +#174724 = CARTESIAN_POINT('',(208.49165,-96.0131,1.585)); +#174725 = LINE('',#174726,#174727); +#174726 = CARTESIAN_POINT('',(207.79165,-96.0131,1.585)); +#174727 = VECTOR('',#174728,1.); +#174728 = DIRECTION('',(1.,0.,0.)); +#174729 = ORIENTED_EDGE('',*,*,#174730,.T.); +#174730 = EDGE_CURVE('',#174723,#174731,#174733,.T.); +#174731 = VERTEX_POINT('',#174732); +#174732 = CARTESIAN_POINT('',(208.55165,-96.0731,1.585)); +#174733 = CIRCLE('',#174734,5.999932016262E-02); +#174734 = AXIS2_PLACEMENT_3D('',#174735,#174736,#174737); +#174735 = CARTESIAN_POINT('',(208.49165067984,-96.07309932015,1.585)); +#174736 = DIRECTION('',(0.,0.,-1.)); +#174737 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#174738 = ORIENTED_EDGE('',*,*,#174739,.T.); +#174739 = EDGE_CURVE('',#174731,#174740,#174742,.T.); +#174740 = VERTEX_POINT('',#174741); +#174741 = CARTESIAN_POINT('',(208.55165,-97.8231,1.585)); +#174742 = LINE('',#174743,#174744); +#174743 = CARTESIAN_POINT('',(208.55165,-96.0731,1.585)); +#174744 = VECTOR('',#174745,1.); +#174745 = DIRECTION('',(0.,-1.,0.)); +#174746 = ORIENTED_EDGE('',*,*,#174747,.T.); +#174747 = EDGE_CURVE('',#174740,#174748,#174750,.T.); +#174748 = VERTEX_POINT('',#174749); +#174749 = CARTESIAN_POINT('',(209.93165,-97.8231,1.585)); +#174750 = LINE('',#174751,#174752); +#174751 = CARTESIAN_POINT('',(208.55165,-97.8231,1.585)); +#174752 = VECTOR('',#174753,1.); +#174753 = DIRECTION('',(1.,0.,0.)); +#174754 = ORIENTED_EDGE('',*,*,#174755,.T.); +#174755 = EDGE_CURVE('',#174748,#174756,#174758,.T.); +#174756 = VERTEX_POINT('',#174757); +#174757 = CARTESIAN_POINT('',(209.93165,-97.1231,1.585)); +#174758 = LINE('',#174759,#174760); +#174759 = CARTESIAN_POINT('',(209.93165,-97.8231,1.585)); +#174760 = VECTOR('',#174761,1.); +#174761 = DIRECTION('',(0.,1.,0.)); +#174762 = ORIENTED_EDGE('',*,*,#174763,.T.); +#174763 = EDGE_CURVE('',#174756,#174764,#174766,.T.); +#174764 = VERTEX_POINT('',#174765); +#174765 = CARTESIAN_POINT('',(209.99165,-97.0631,1.585)); +#174766 = CIRCLE('',#174767,5.999932016261E-02); +#174767 = AXIS2_PLACEMENT_3D('',#174768,#174769,#174770); +#174768 = CARTESIAN_POINT('',(209.99164932015,-97.12309932015,1.585)); +#174769 = DIRECTION('',(0.,0.,-1.)); +#174770 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#174771 = ORIENTED_EDGE('',*,*,#174772,.T.); +#174772 = EDGE_CURVE('',#174764,#174773,#174775,.T.); +#174773 = VERTEX_POINT('',#174774); +#174774 = CARTESIAN_POINT('',(212.88165,-97.0631,1.585)); +#174775 = LINE('',#174776,#174777); +#174776 = CARTESIAN_POINT('',(209.99165,-97.0631,1.585)); +#174777 = VECTOR('',#174778,1.); +#174778 = DIRECTION('',(1.,0.,0.)); +#174779 = ORIENTED_EDGE('',*,*,#174780,.T.); +#174780 = EDGE_CURVE('',#174773,#174781,#174783,.T.); +#174781 = VERTEX_POINT('',#174782); +#174782 = CARTESIAN_POINT('',(212.88165,-86.0831,1.585)); +#174783 = LINE('',#174784,#174785); +#174784 = CARTESIAN_POINT('',(212.88165,-97.0631,1.585)); +#174785 = VECTOR('',#174786,1.); +#174786 = DIRECTION('',(0.,1.,0.)); +#174787 = ORIENTED_EDGE('',*,*,#174788,.T.); +#174788 = EDGE_CURVE('',#174781,#174613,#174789,.T.); +#174789 = LINE('',#174790,#174791); +#174790 = CARTESIAN_POINT('',(212.88165,-86.0831,1.585)); +#174791 = VECTOR('',#174792,1.); +#174792 = DIRECTION('',(-1.,0.,0.)); +#174793 = FACE_BOUND('',#174794,.F.); +#174794 = EDGE_LOOP('',(#174795,#174805,#174813,#174821,#174829,#174838, + #174846,#174855,#174863,#174871)); +#174795 = ORIENTED_EDGE('',*,*,#174796,.T.); +#174796 = EDGE_CURVE('',#174797,#174799,#174801,.T.); +#174797 = VERTEX_POINT('',#174798); +#174798 = CARTESIAN_POINT('',(213.64165,-97.8231,1.585)); +#174799 = VERTEX_POINT('',#174800); +#174800 = CARTESIAN_POINT('',(213.64165,-85.3231,1.585)); +#174801 = LINE('',#174802,#174803); +#174802 = CARTESIAN_POINT('',(213.64165,-97.8231,1.585)); +#174803 = VECTOR('',#174804,1.); +#174804 = DIRECTION('',(0.,1.,0.)); +#174805 = ORIENTED_EDGE('',*,*,#174806,.T.); +#174806 = EDGE_CURVE('',#174799,#174807,#174809,.T.); +#174807 = VERTEX_POINT('',#174808); +#174808 = CARTESIAN_POINT('',(210.05165,-85.3231,1.585)); +#174809 = LINE('',#174810,#174811); +#174810 = CARTESIAN_POINT('',(213.64165,-85.3231,1.585)); +#174811 = VECTOR('',#174812,1.); +#174812 = DIRECTION('',(-1.,0.,0.)); +#174813 = ORIENTED_EDGE('',*,*,#174814,.T.); +#174814 = EDGE_CURVE('',#174807,#174815,#174817,.T.); +#174815 = VERTEX_POINT('',#174816); +#174816 = CARTESIAN_POINT('',(210.05165,-85.9631,1.585)); +#174817 = LINE('',#174818,#174819); +#174818 = CARTESIAN_POINT('',(210.05165,-85.3231,1.585)); +#174819 = VECTOR('',#174820,1.); +#174820 = DIRECTION('',(0.,-1.,0.)); +#174821 = ORIENTED_EDGE('',*,*,#174822,.T.); +#174822 = EDGE_CURVE('',#174815,#174823,#174825,.T.); +#174823 = VERTEX_POINT('',#174824); +#174824 = CARTESIAN_POINT('',(212.94165,-85.9631,1.585)); +#174825 = LINE('',#174826,#174827); +#174826 = CARTESIAN_POINT('',(210.05165,-85.9631,1.585)); +#174827 = VECTOR('',#174828,1.); +#174828 = DIRECTION('',(1.,0.,0.)); +#174829 = ORIENTED_EDGE('',*,*,#174830,.T.); +#174830 = EDGE_CURVE('',#174823,#174831,#174833,.T.); +#174831 = VERTEX_POINT('',#174832); +#174832 = CARTESIAN_POINT('',(213.00165,-86.0231,1.585)); +#174833 = CIRCLE('',#174834,5.999932016268E-02); +#174834 = AXIS2_PLACEMENT_3D('',#174835,#174836,#174837); +#174835 = CARTESIAN_POINT('',(212.94165067984,-86.02309932015,1.585)); +#174836 = DIRECTION('',(0.,0.,-1.)); +#174837 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#174838 = ORIENTED_EDGE('',*,*,#174839,.T.); +#174839 = EDGE_CURVE('',#174831,#174840,#174842,.T.); +#174840 = VERTEX_POINT('',#174841); +#174841 = CARTESIAN_POINT('',(213.00165,-97.1231,1.585)); +#174842 = LINE('',#174843,#174844); +#174843 = CARTESIAN_POINT('',(213.00165,-86.0231,1.585)); +#174844 = VECTOR('',#174845,1.); +#174845 = DIRECTION('',(0.,-1.,0.)); +#174846 = ORIENTED_EDGE('',*,*,#174847,.T.); +#174847 = EDGE_CURVE('',#174840,#174848,#174850,.T.); +#174848 = VERTEX_POINT('',#174849); +#174849 = CARTESIAN_POINT('',(212.94165,-97.1831,1.585)); +#174850 = CIRCLE('',#174851,5.999932016262E-02); +#174851 = AXIS2_PLACEMENT_3D('',#174852,#174853,#174854); +#174852 = CARTESIAN_POINT('',(212.94165067984,-97.12310067984,1.585)); +#174853 = DIRECTION('',(0.,0.,-1.)); +#174854 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#174855 = ORIENTED_EDGE('',*,*,#174856,.T.); +#174856 = EDGE_CURVE('',#174848,#174857,#174859,.T.); +#174857 = VERTEX_POINT('',#174858); +#174858 = CARTESIAN_POINT('',(210.05165,-97.1831,1.585)); +#174859 = LINE('',#174860,#174861); +#174860 = CARTESIAN_POINT('',(212.94165,-97.1831,1.585)); +#174861 = VECTOR('',#174862,1.); +#174862 = DIRECTION('',(-1.,0.,0.)); +#174863 = ORIENTED_EDGE('',*,*,#174864,.T.); +#174864 = EDGE_CURVE('',#174857,#174865,#174867,.T.); +#174865 = VERTEX_POINT('',#174866); +#174866 = CARTESIAN_POINT('',(210.05165,-97.8231,1.585)); +#174867 = LINE('',#174868,#174869); +#174868 = CARTESIAN_POINT('',(210.05165,-97.1831,1.585)); +#174869 = VECTOR('',#174870,1.); +#174870 = DIRECTION('',(0.,-1.,0.)); +#174871 = ORIENTED_EDGE('',*,*,#174872,.T.); +#174872 = EDGE_CURVE('',#174865,#174797,#174873,.T.); +#174873 = LINE('',#174874,#174875); +#174874 = CARTESIAN_POINT('',(210.05165,-97.8231,1.585)); +#174875 = VECTOR('',#174876,1.); +#174876 = DIRECTION('',(1.,0.,0.)); +#174877 = FACE_BOUND('',#174878,.F.); +#174878 = EDGE_LOOP('',(#174879,#174889,#174897,#174905)); +#174879 = ORIENTED_EDGE('',*,*,#174880,.T.); +#174880 = EDGE_CURVE('',#174881,#174883,#174885,.T.); +#174881 = VERTEX_POINT('',#174882); +#174882 = CARTESIAN_POINT('',(208.43165,-97.8131,1.585)); +#174883 = VERTEX_POINT('',#174884); +#174884 = CARTESIAN_POINT('',(208.43165,-96.1331,1.585)); +#174885 = LINE('',#174886,#174887); +#174886 = CARTESIAN_POINT('',(208.43165,-97.8131,1.585)); +#174887 = VECTOR('',#174888,1.); +#174888 = DIRECTION('',(0.,1.,0.)); +#174889 = ORIENTED_EDGE('',*,*,#174890,.T.); +#174890 = EDGE_CURVE('',#174883,#174891,#174893,.T.); +#174891 = VERTEX_POINT('',#174892); +#174892 = CARTESIAN_POINT('',(207.80165,-96.1331,1.585)); +#174893 = LINE('',#174894,#174895); +#174894 = CARTESIAN_POINT('',(208.43165,-96.1331,1.585)); +#174895 = VECTOR('',#174896,1.); +#174896 = DIRECTION('',(-1.,0.,0.)); +#174897 = ORIENTED_EDGE('',*,*,#174898,.T.); +#174898 = EDGE_CURVE('',#174891,#174899,#174901,.T.); +#174899 = VERTEX_POINT('',#174900); +#174900 = CARTESIAN_POINT('',(207.80165,-97.8131,1.585)); +#174901 = LINE('',#174902,#174903); +#174902 = CARTESIAN_POINT('',(207.80165,-96.1331,1.585)); +#174903 = VECTOR('',#174904,1.); +#174904 = DIRECTION('',(0.,-1.,0.)); +#174905 = ORIENTED_EDGE('',*,*,#174906,.T.); +#174906 = EDGE_CURVE('',#174899,#174881,#174907,.T.); +#174907 = LINE('',#174908,#174909); +#174908 = CARTESIAN_POINT('',(207.80165,-97.8131,1.585)); +#174909 = VECTOR('',#174910,1.); +#174910 = DIRECTION('',(1.,0.,0.)); +#174911 = FACE_BOUND('',#174912,.F.); +#174912 = EDGE_LOOP('',(#174913,#174923,#174931,#174939)); +#174913 = ORIENTED_EDGE('',*,*,#174914,.T.); +#174914 = EDGE_CURVE('',#174915,#174917,#174919,.T.); +#174915 = VERTEX_POINT('',#174916); +#174916 = CARTESIAN_POINT('',(208.43165,-94.5131,1.585)); +#174917 = VERTEX_POINT('',#174918); +#174918 = CARTESIAN_POINT('',(208.43165,-88.6331,1.585)); +#174919 = LINE('',#174920,#174921); +#174920 = CARTESIAN_POINT('',(208.43165,-94.5131,1.585)); +#174921 = VECTOR('',#174922,1.); +#174922 = DIRECTION('',(0.,1.,0.)); +#174923 = ORIENTED_EDGE('',*,*,#174924,.T.); +#174924 = EDGE_CURVE('',#174917,#174925,#174927,.T.); +#174925 = VERTEX_POINT('',#174926); +#174926 = CARTESIAN_POINT('',(207.80165,-88.6331,1.585)); +#174927 = LINE('',#174928,#174929); +#174928 = CARTESIAN_POINT('',(208.43165,-88.6331,1.585)); +#174929 = VECTOR('',#174930,1.); +#174930 = DIRECTION('',(-1.,0.,0.)); +#174931 = ORIENTED_EDGE('',*,*,#174932,.T.); +#174932 = EDGE_CURVE('',#174925,#174933,#174935,.T.); +#174933 = VERTEX_POINT('',#174934); +#174934 = CARTESIAN_POINT('',(207.80165,-94.5131,1.585)); +#174935 = LINE('',#174936,#174937); +#174936 = CARTESIAN_POINT('',(207.80165,-88.6331,1.585)); +#174937 = VECTOR('',#174938,1.); +#174938 = DIRECTION('',(0.,-1.,0.)); +#174939 = ORIENTED_EDGE('',*,*,#174940,.T.); +#174940 = EDGE_CURVE('',#174933,#174915,#174941,.T.); +#174941 = LINE('',#174942,#174943); +#174942 = CARTESIAN_POINT('',(207.80165,-94.5131,1.585)); +#174943 = VECTOR('',#174944,1.); +#174944 = DIRECTION('',(1.,0.,0.)); +#174945 = FACE_BOUND('',#174946,.F.); +#174946 = EDGE_LOOP('',(#174947,#174957,#174965,#174973)); +#174947 = ORIENTED_EDGE('',*,*,#174948,.T.); +#174948 = EDGE_CURVE('',#174949,#174951,#174953,.T.); +#174949 = VERTEX_POINT('',#174950); +#174950 = CARTESIAN_POINT('',(208.43165,-87.0131,1.585)); +#174951 = VERTEX_POINT('',#174952); +#174952 = CARTESIAN_POINT('',(208.43165,-85.3331,1.585)); +#174953 = LINE('',#174954,#174955); +#174954 = CARTESIAN_POINT('',(208.43165,-87.0131,1.585)); +#174955 = VECTOR('',#174956,1.); +#174956 = DIRECTION('',(0.,1.,0.)); +#174957 = ORIENTED_EDGE('',*,*,#174958,.T.); +#174958 = EDGE_CURVE('',#174951,#174959,#174961,.T.); +#174959 = VERTEX_POINT('',#174960); +#174960 = CARTESIAN_POINT('',(207.80165,-85.3331,1.585)); +#174961 = LINE('',#174962,#174963); +#174962 = CARTESIAN_POINT('',(208.43165,-85.3331,1.585)); +#174963 = VECTOR('',#174964,1.); +#174964 = DIRECTION('',(-1.,0.,0.)); +#174965 = ORIENTED_EDGE('',*,*,#174966,.T.); +#174966 = EDGE_CURVE('',#174959,#174967,#174969,.T.); +#174967 = VERTEX_POINT('',#174968); +#174968 = CARTESIAN_POINT('',(207.80165,-87.0131,1.585)); +#174969 = LINE('',#174970,#174971); +#174970 = CARTESIAN_POINT('',(207.80165,-85.3331,1.585)); +#174971 = VECTOR('',#174972,1.); +#174972 = DIRECTION('',(0.,-1.,0.)); +#174973 = ORIENTED_EDGE('',*,*,#174974,.T.); +#174974 = EDGE_CURVE('',#174967,#174949,#174975,.T.); +#174975 = LINE('',#174976,#174977); +#174976 = CARTESIAN_POINT('',(207.80165,-87.0131,1.585)); +#174977 = VECTOR('',#174978,1.); +#174978 = DIRECTION('',(1.,0.,0.)); +#174979 = PLANE('',#174980); +#174980 = AXIS2_PLACEMENT_3D('',#174981,#174982,#174983); +#174981 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174982 = DIRECTION('',(0.,0.,1.)); +#174983 = DIRECTION('',(1.,0.,-0.)); +#174984 = SHELL_BASED_SURFACE_MODEL('',(#174985)); +#174985 = OPEN_SHELL('',(#174986)); +#174986 = ADVANCED_FACE('',(#174987),#175023,.T.); +#174987 = FACE_BOUND('',#174988,.F.); +#174988 = EDGE_LOOP('',(#174989,#175000,#175008,#175017)); +#174989 = ORIENTED_EDGE('',*,*,#174990,.T.); +#174990 = EDGE_CURVE('',#174991,#174993,#174995,.T.); +#174991 = VERTEX_POINT('',#174992); +#174992 = CARTESIAN_POINT('',(112.27607,-97.8931,1.585)); +#174993 = VERTEX_POINT('',#174994); +#174994 = CARTESIAN_POINT('',(112.27607,-97.7731,1.585)); +#174995 = CIRCLE('',#174996,6.000000000043E-02); +#174996 = AXIS2_PLACEMENT_3D('',#174997,#174998,#174999); +#174997 = CARTESIAN_POINT('',(112.27606977441,-97.8331,1.585)); +#174998 = DIRECTION('',(0.,0.,-1.)); +#174999 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#175000 = ORIENTED_EDGE('',*,*,#175001,.T.); +#175001 = EDGE_CURVE('',#174993,#175002,#175004,.T.); +#175002 = VERTEX_POINT('',#175003); +#175003 = CARTESIAN_POINT('',(112.55723,-97.7731,1.585)); +#175004 = LINE('',#175005,#175006); +#175005 = CARTESIAN_POINT('',(112.27607,-97.7731,1.585)); +#175006 = VECTOR('',#175007,1.); +#175007 = DIRECTION('',(1.,0.,0.)); +#175008 = ORIENTED_EDGE('',*,*,#175009,.T.); +#175009 = EDGE_CURVE('',#175002,#175010,#175012,.T.); +#175010 = VERTEX_POINT('',#175011); +#175011 = CARTESIAN_POINT('',(112.55723,-97.8931,1.585)); +#175012 = CIRCLE('',#175013,6.000000000042E-02); +#175013 = AXIS2_PLACEMENT_3D('',#175014,#175015,#175016); +#175014 = CARTESIAN_POINT('',(112.55723022558,-97.8331,1.585)); +#175015 = DIRECTION('',(0.,0.,-1.)); +#175016 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#175017 = ORIENTED_EDGE('',*,*,#175018,.T.); +#175018 = EDGE_CURVE('',#175010,#174991,#175019,.T.); +#175019 = LINE('',#175020,#175021); +#175020 = CARTESIAN_POINT('',(112.55723,-97.8931,1.585)); +#175021 = VECTOR('',#175022,1.); +#175022 = DIRECTION('',(-1.,0.,0.)); +#175023 = PLANE('',#175024); +#175024 = AXIS2_PLACEMENT_3D('',#175025,#175026,#175027); +#175025 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175026 = DIRECTION('',(0.,0.,1.)); +#175027 = DIRECTION('',(1.,0.,-0.)); +#175028 = SHELL_BASED_SURFACE_MODEL('',(#175029)); +#175029 = OPEN_SHELL('',(#175030)); +#175030 = ADVANCED_FACE('',(#175031),#175216,.T.); +#175031 = FACE_BOUND('',#175032,.F.); +#175032 = EDGE_LOOP('',(#175033,#175044,#175052,#175061,#175069,#175078, + #175086,#175094,#175102,#175111,#175119,#175128,#175136,#175145, + #175153,#175161,#175169,#175177,#175185,#175193,#175201,#175210)); +#175033 = ORIENTED_EDGE('',*,*,#175034,.T.); +#175034 = EDGE_CURVE('',#175035,#175037,#175039,.T.); +#175035 = VERTEX_POINT('',#175036); +#175036 = CARTESIAN_POINT('',(180.880039,-96.903597,1.585)); +#175037 = VERTEX_POINT('',#175038); +#175038 = CARTESIAN_POINT('',(180.97474,-97.01899,1.585)); +#175039 = CIRCLE('',#175040,7.500003178656E-02); +#175040 = AXIS2_PLACEMENT_3D('',#175041,#175042,#175043); +#175041 = CARTESIAN_POINT('',(180.9217065,-96.96595743787,1.585)); +#175042 = DIRECTION('',(0.,0.,-1.)); +#175043 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#175044 = ORIENTED_EDGE('',*,*,#175045,.T.); +#175045 = EDGE_CURVE('',#175037,#175046,#175048,.T.); +#175046 = VERTEX_POINT('',#175047); +#175047 = CARTESIAN_POINT('',(180.93964,-97.054089,1.585)); +#175048 = LINE('',#175049,#175050); +#175049 = CARTESIAN_POINT('',(180.97474,-97.01899,1.585)); +#175050 = VECTOR('',#175051,1.); +#175051 = DIRECTION('',(-0.707116854004,-0.707096708225,0.)); +#175052 = ORIENTED_EDGE('',*,*,#175053,.T.); +#175053 = EDGE_CURVE('',#175046,#175054,#175056,.T.); +#175054 = VERTEX_POINT('',#175055); +#175055 = CARTESIAN_POINT('',(180.93964,-97.354014,1.585)); +#175056 = CIRCLE('',#175057,0.299310989749); +#175057 = AXIS2_PLACEMENT_3D('',#175058,#175059,#175060); +#175058 = CARTESIAN_POINT('',(181.19867342868,-97.2040515,1.585)); +#175059 = DIRECTION('',(0.,0.,1.)); +#175060 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#175061 = ORIENTED_EDGE('',*,*,#175062,.T.); +#175062 = EDGE_CURVE('',#175054,#175063,#175065,.T.); +#175063 = VERTEX_POINT('',#175064); +#175064 = CARTESIAN_POINT('',(181.013753,-97.428127,1.585)); +#175065 = LINE('',#175066,#175067); +#175066 = CARTESIAN_POINT('',(180.93964,-97.354014,1.585)); +#175067 = VECTOR('',#175068,1.); +#175068 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#175069 = ORIENTED_EDGE('',*,*,#175070,.T.); +#175070 = EDGE_CURVE('',#175063,#175071,#175073,.T.); +#175071 = VERTEX_POINT('',#175072); +#175072 = CARTESIAN_POINT('',(181.388663,-97.510004,1.585)); +#175073 = CIRCLE('',#175074,0.611738044646); +#175074 = AXIS2_PLACEMENT_3D('',#175075,#175076,#175077); +#175075 = CARTESIAN_POINT('',(181.32514337395,-96.90157266256,1.585)); +#175076 = DIRECTION('',(0.,0.,1.)); +#175077 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#175078 = ORIENTED_EDGE('',*,*,#175079,.T.); +#175079 = EDGE_CURVE('',#175071,#175080,#175082,.T.); +#175080 = VERTEX_POINT('',#175081); +#175081 = CARTESIAN_POINT('',(181.562197,-97.46662,1.585)); +#175082 = LINE('',#175083,#175084); +#175083 = CARTESIAN_POINT('',(181.388663,-97.510004,1.585)); +#175084 = VECTOR('',#175085,1.); +#175085 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#175086 = ORIENTED_EDGE('',*,*,#175087,.T.); +#175087 = EDGE_CURVE('',#175080,#175088,#175090,.T.); +#175088 = VERTEX_POINT('',#175089); +#175089 = CARTESIAN_POINT('',(181.639184,-97.428126,1.585)); +#175090 = LINE('',#175091,#175092); +#175091 = CARTESIAN_POINT('',(181.562197,-97.46662,1.585)); +#175092 = VECTOR('',#175093,1.); +#175093 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#175094 = ORIENTED_EDGE('',*,*,#175095,.T.); +#175095 = EDGE_CURVE('',#175088,#175096,#175098,.T.); +#175096 = VERTEX_POINT('',#175097); +#175097 = CARTESIAN_POINT('',(181.713298,-97.354013,1.585)); +#175098 = LINE('',#175099,#175100); +#175099 = CARTESIAN_POINT('',(181.639184,-97.428126,1.585)); +#175100 = VECTOR('',#175101,1.); +#175101 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#175102 = ORIENTED_EDGE('',*,*,#175103,.T.); +#175103 = EDGE_CURVE('',#175096,#175104,#175106,.T.); +#175104 = VERTEX_POINT('',#175105); +#175105 = CARTESIAN_POINT('',(181.713298,-97.05409,1.585)); +#175106 = CIRCLE('',#175107,0.299306284995); +#175107 = AXIS2_PLACEMENT_3D('',#175108,#175109,#175110); +#175108 = CARTESIAN_POINT('',(181.45426942868,-97.2040515,1.585)); +#175109 = DIRECTION('',(0.,-0.,1.)); +#175110 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#175111 = ORIENTED_EDGE('',*,*,#175112,.T.); +#175112 = EDGE_CURVE('',#175104,#175113,#175115,.T.); +#175113 = VERTEX_POINT('',#175114); +#175114 = CARTESIAN_POINT('',(181.66887,-97.007625,1.585)); +#175115 = LINE('',#175116,#175117); +#175116 = CARTESIAN_POINT('',(181.713298,-97.05409,1.585)); +#175117 = VECTOR('',#175118,1.); +#175118 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#175119 = ORIENTED_EDGE('',*,*,#175120,.T.); +#175120 = EDGE_CURVE('',#175113,#175121,#175123,.T.); +#175121 = VERTEX_POINT('',#175122); +#175122 = CARTESIAN_POINT('',(181.784262,-96.912923,1.585)); +#175123 = CIRCLE('',#175124,7.499993690526E-02); +#175124 = AXIS2_PLACEMENT_3D('',#175125,#175126,#175127); +#175125 = CARTESIAN_POINT('',(181.73122982375,-96.96595675169,1.585)); +#175126 = DIRECTION('',(0.,0.,-1.)); +#175127 = DIRECTION('',(-0.831465016204,-0.555577111506,-0.)); +#175128 = ORIENTED_EDGE('',*,*,#175129,.T.); +#175129 = EDGE_CURVE('',#175121,#175130,#175132,.T.); +#175130 = VERTEX_POINT('',#175131); +#175131 = CARTESIAN_POINT('',(181.844007,-96.976433,1.585)); +#175132 = LINE('',#175133,#175134); +#175133 = CARTESIAN_POINT('',(181.784262,-96.912923,1.585)); +#175134 = VECTOR('',#175135,1.); +#175135 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#175136 = ORIENTED_EDGE('',*,*,#175137,.T.); +#175137 = EDGE_CURVE('',#175130,#175138,#175140,.T.); +#175138 = VERTEX_POINT('',#175139); +#175139 = CARTESIAN_POINT('',(181.841211,-97.436196,1.585)); +#175140 = CIRCLE('',#175141,0.461068563463); +#175141 = AXIS2_PLACEMENT_3D('',#175142,#175143,#175144); +#175142 = CARTESIAN_POINT('',(181.44294557362,-97.20388398919,1.585)); +#175143 = DIRECTION('',(0.,0.,-1.)); +#175144 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#175145 = ORIENTED_EDGE('',*,*,#175146,.T.); +#175146 = EDGE_CURVE('',#175138,#175147,#175149,.T.); +#175147 = VERTEX_POINT('',#175148); +#175148 = CARTESIAN_POINT('',(181.723448,-97.552884,1.585)); +#175149 = LINE('',#175150,#175151); +#175150 = CARTESIAN_POINT('',(181.841211,-97.436196,1.585)); +#175151 = VECTOR('',#175152,1.); +#175152 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#175153 = ORIENTED_EDGE('',*,*,#175154,.T.); +#175154 = EDGE_CURVE('',#175147,#175155,#175157,.T.); +#175155 = VERTEX_POINT('',#175156); +#175156 = CARTESIAN_POINT('',(181.606563,-97.610146,1.585)); +#175157 = LINE('',#175158,#175159); +#175158 = CARTESIAN_POINT('',(181.723448,-97.552884,1.585)); +#175159 = VECTOR('',#175160,1.); +#175160 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#175161 = ORIENTED_EDGE('',*,*,#175162,.T.); +#175162 = EDGE_CURVE('',#175155,#175163,#175165,.T.); +#175163 = VERTEX_POINT('',#175164); +#175164 = CARTESIAN_POINT('',(181.397897,-97.660004,1.585)); +#175165 = LINE('',#175166,#175167); +#175166 = CARTESIAN_POINT('',(181.606563,-97.610146,1.585)); +#175167 = VECTOR('',#175168,1.); +#175168 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#175169 = ORIENTED_EDGE('',*,*,#175170,.T.); +#175170 = EDGE_CURVE('',#175163,#175171,#175173,.T.); +#175171 = VERTEX_POINT('',#175172); +#175172 = CARTESIAN_POINT('',(181.23685,-97.657765,1.585)); +#175173 = LINE('',#175174,#175175); +#175174 = CARTESIAN_POINT('',(181.397897,-97.660004,1.585)); +#175175 = VECTOR('',#175176,1.); +#175176 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#175177 = ORIENTED_EDGE('',*,*,#175178,.T.); +#175178 = EDGE_CURVE('',#175171,#175179,#175181,.T.); +#175179 = VERTEX_POINT('',#175180); +#175180 = CARTESIAN_POINT('',(181.031023,-97.604467,1.585)); +#175181 = LINE('',#175182,#175183); +#175182 = CARTESIAN_POINT('',(181.23685,-97.657765,1.585)); +#175183 = VECTOR('',#175184,1.); +#175184 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#175185 = ORIENTED_EDGE('',*,*,#175186,.T.); +#175186 = EDGE_CURVE('',#175179,#175187,#175189,.T.); +#175187 = VERTEX_POINT('',#175188); +#175188 = CARTESIAN_POINT('',(180.922043,-97.547519,1.585)); +#175189 = LINE('',#175190,#175191); +#175190 = CARTESIAN_POINT('',(181.031023,-97.604467,1.585)); +#175191 = VECTOR('',#175192,1.); +#175192 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#175193 = ORIENTED_EDGE('',*,*,#175194,.T.); +#175194 = EDGE_CURVE('',#175187,#175195,#175197,.T.); +#175195 = VERTEX_POINT('',#175196); +#175196 = CARTESIAN_POINT('',(180.808931,-97.43167,1.585)); +#175197 = LINE('',#175198,#175199); +#175198 = CARTESIAN_POINT('',(180.922043,-97.547519,1.585)); +#175199 = VECTOR('',#175200,1.); +#175200 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#175201 = ORIENTED_EDGE('',*,*,#175202,.T.); +#175202 = EDGE_CURVE('',#175195,#175203,#175205,.T.); +#175203 = VERTEX_POINT('',#175204); +#175204 = CARTESIAN_POINT('',(180.811728,-96.971908,1.585)); +#175205 = CIRCLE('',#175206,0.461058290907); +#175206 = AXIS2_PLACEMENT_3D('',#175207,#175208,#175209); +#175207 = CARTESIAN_POINT('',(181.20998135644,-97.20422031499,1.585)); +#175208 = DIRECTION('',(0.,0.,-1.)); +#175209 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#175210 = ORIENTED_EDGE('',*,*,#175211,.T.); +#175211 = EDGE_CURVE('',#175203,#175035,#175212,.T.); +#175212 = LINE('',#175213,#175214); +#175213 = CARTESIAN_POINT('',(180.811728,-96.971908,1.585)); +#175214 = VECTOR('',#175215,1.); +#175215 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#175216 = PLANE('',#175217); +#175217 = AXIS2_PLACEMENT_3D('',#175218,#175219,#175220); +#175218 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175219 = DIRECTION('',(0.,0.,1.)); +#175220 = DIRECTION('',(1.,0.,-0.)); +#175221 = SHELL_BASED_SURFACE_MODEL('',(#175222)); +#175222 = OPEN_SHELL('',(#175223)); +#175223 = ADVANCED_FACE('',(#175224),#175260,.T.); +#175224 = FACE_BOUND('',#175225,.F.); +#175225 = EDGE_LOOP('',(#175226,#175237,#175245,#175254)); +#175226 = ORIENTED_EDGE('',*,*,#175227,.T.); +#175227 = EDGE_CURVE('',#175228,#175230,#175232,.T.); +#175228 = VERTEX_POINT('',#175229); +#175229 = CARTESIAN_POINT('',(99.930398,-97.6481,1.585)); +#175230 = VERTEX_POINT('',#175231); +#175231 = CARTESIAN_POINT('',(99.930398,-97.5281,1.585)); +#175232 = CIRCLE('',#175233,6.000000000043E-02); +#175233 = AXIS2_PLACEMENT_3D('',#175234,#175235,#175236); +#175234 = CARTESIAN_POINT('',(99.930397774412,-97.5881,1.585)); +#175235 = DIRECTION('',(0.,0.,-1.)); +#175236 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#175237 = ORIENTED_EDGE('',*,*,#175238,.T.); +#175238 = EDGE_CURVE('',#175230,#175239,#175241,.T.); +#175239 = VERTEX_POINT('',#175240); +#175240 = CARTESIAN_POINT('',(100.452902,-97.5281,1.585)); +#175241 = LINE('',#175242,#175243); +#175242 = CARTESIAN_POINT('',(99.930398,-97.5281,1.585)); +#175243 = VECTOR('',#175244,1.); +#175244 = DIRECTION('',(1.,0.,0.)); +#175245 = ORIENTED_EDGE('',*,*,#175246,.T.); +#175246 = EDGE_CURVE('',#175239,#175247,#175249,.T.); +#175247 = VERTEX_POINT('',#175248); +#175248 = CARTESIAN_POINT('',(100.452902,-97.6481,1.585)); +#175249 = CIRCLE('',#175250,6.000000000043E-02); +#175250 = AXIS2_PLACEMENT_3D('',#175251,#175252,#175253); +#175251 = CARTESIAN_POINT('',(100.45290222558,-97.5881,1.585)); +#175252 = DIRECTION('',(0.,0.,-1.)); +#175253 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#175254 = ORIENTED_EDGE('',*,*,#175255,.T.); +#175255 = EDGE_CURVE('',#175247,#175228,#175256,.T.); +#175256 = LINE('',#175257,#175258); +#175257 = CARTESIAN_POINT('',(100.452902,-97.6481,1.585)); +#175258 = VECTOR('',#175259,1.); +#175259 = DIRECTION('',(-1.,0.,0.)); +#175260 = PLANE('',#175261); +#175261 = AXIS2_PLACEMENT_3D('',#175262,#175263,#175264); +#175262 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175263 = DIRECTION('',(0.,0.,1.)); +#175264 = DIRECTION('',(1.,0.,-0.)); +#175265 = SHELL_BASED_SURFACE_MODEL('',(#175266)); +#175266 = OPEN_SHELL('',(#175267)); +#175267 = ADVANCED_FACE('',(#175268,#175440),#175523,.T.); +#175268 = FACE_BOUND('',#175269,.F.); +#175269 = EDGE_LOOP('',(#175270,#175280,#175288,#175296,#175304,#175312, + #175320,#175328,#175336,#175344,#175352,#175360,#175369,#175377, + #175386,#175394,#175402,#175410,#175418,#175426,#175434)); +#175270 = ORIENTED_EDGE('',*,*,#175271,.T.); +#175271 = EDGE_CURVE('',#175272,#175274,#175276,.T.); +#175272 = VERTEX_POINT('',#175273); +#175273 = CARTESIAN_POINT('',(82.877073,-95.868137,1.585)); +#175274 = VERTEX_POINT('',#175275); +#175275 = CARTESIAN_POINT('',(83.168409,-95.724375,1.585)); +#175276 = LINE('',#175277,#175278); +#175277 = CARTESIAN_POINT('',(82.877073,-95.868137,1.585)); +#175278 = VECTOR('',#175279,1.); +#175279 = DIRECTION('',(0.896761620593,0.442513949871,0.)); +#175280 = ORIENTED_EDGE('',*,*,#175281,.T.); +#175281 = EDGE_CURVE('',#175274,#175282,#175284,.T.); +#175282 = VERTEX_POINT('',#175283); +#175283 = CARTESIAN_POINT('',(83.208028,-95.719049,1.585)); +#175284 = LINE('',#175285,#175286); +#175285 = CARTESIAN_POINT('',(83.168409,-95.724375,1.585)); +#175286 = VECTOR('',#175287,1.); +#175287 = DIRECTION('',(0.991084879219,0.133231986338,0.)); +#175288 = ORIENTED_EDGE('',*,*,#175289,.T.); +#175289 = EDGE_CURVE('',#175282,#175290,#175292,.T.); +#175290 = VERTEX_POINT('',#175291); +#175291 = CARTESIAN_POINT('',(83.980149,-95.721931,1.585)); +#175292 = LINE('',#175293,#175294); +#175293 = CARTESIAN_POINT('',(83.208028,-95.719049,1.585)); +#175294 = VECTOR('',#175295,1.); +#175295 = DIRECTION('',(0.999993034013,-3.732549592646E-03,0.)); +#175296 = ORIENTED_EDGE('',*,*,#175297,.T.); +#175297 = EDGE_CURVE('',#175290,#175298,#175300,.T.); +#175298 = VERTEX_POINT('',#175299); +#175299 = CARTESIAN_POINT('',(84.017967,-95.734885,1.585)); +#175300 = LINE('',#175301,#175302); +#175301 = CARTESIAN_POINT('',(83.980149,-95.721931,1.585)); +#175302 = VECTOR('',#175303,1.); +#175303 = DIRECTION('',(0.946039317712,-0.32405186212,0.)); +#175304 = ORIENTED_EDGE('',*,*,#175305,.T.); +#175305 = EDGE_CURVE('',#175298,#175306,#175308,.T.); +#175306 = VERTEX_POINT('',#175307); +#175307 = CARTESIAN_POINT('',(84.290471,-95.874359,1.585)); +#175308 = LINE('',#175309,#175310); +#175309 = CARTESIAN_POINT('',(84.017967,-95.734885,1.585)); +#175310 = VECTOR('',#175311,1.); +#175311 = DIRECTION('',(0.890177487146,-0.455613917015,0.)); +#175312 = ORIENTED_EDGE('',*,*,#175313,.T.); +#175313 = EDGE_CURVE('',#175306,#175314,#175316,.T.); +#175314 = VERTEX_POINT('',#175315); +#175315 = CARTESIAN_POINT('',(84.447035,-96.033333,1.585)); +#175316 = LINE('',#175317,#175318); +#175317 = CARTESIAN_POINT('',(84.290471,-95.874359,1.585)); +#175318 = VECTOR('',#175319,1.); +#175319 = DIRECTION('',(0.701685610985,-0.712486703972,0.)); +#175320 = ORIENTED_EDGE('',*,*,#175321,.T.); +#175321 = EDGE_CURVE('',#175314,#175322,#175324,.T.); +#175322 = VERTEX_POINT('',#175323); +#175323 = CARTESIAN_POINT('',(84.590797,-96.324668,1.585)); +#175324 = LINE('',#175325,#175326); +#175325 = CARTESIAN_POINT('',(84.447035,-96.033333,1.585)); +#175326 = VECTOR('',#175327,1.); +#175327 = DIRECTION('',(0.442515171356,-0.896761017841,0.)); +#175328 = ORIENTED_EDGE('',*,*,#175329,.T.); +#175329 = EDGE_CURVE('',#175322,#175330,#175332,.T.); +#175330 = VERTEX_POINT('',#175331); +#175331 = CARTESIAN_POINT('',(84.596123,-96.364287,1.585)); +#175332 = LINE('',#175333,#175334); +#175333 = CARTESIAN_POINT('',(84.590797,-96.324668,1.585)); +#175334 = VECTOR('',#175335,1.); +#175335 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#175336 = ORIENTED_EDGE('',*,*,#175337,.T.); +#175337 = EDGE_CURVE('',#175330,#175338,#175340,.T.); +#175338 = VERTEX_POINT('',#175339); +#175339 = CARTESIAN_POINT('',(84.593241,-96.888789,1.585)); +#175340 = LINE('',#175341,#175342); +#175341 = CARTESIAN_POINT('',(84.596123,-96.364287,1.585)); +#175342 = VECTOR('',#175343,1.); +#175343 = DIRECTION('',(-5.494653012067E-03,-0.99998490428,0.)); +#175344 = ORIENTED_EDGE('',*,*,#175345,.T.); +#175345 = EDGE_CURVE('',#175338,#175346,#175348,.T.); +#175346 = VERTEX_POINT('',#175347); +#175347 = CARTESIAN_POINT('',(84.565019,-96.957144,1.585)); +#175348 = LINE('',#175349,#175350); +#175349 = CARTESIAN_POINT('',(84.593241,-96.888789,1.585)); +#175350 = VECTOR('',#175351,1.); +#175351 = DIRECTION('',(-0.381626303138,-0.924316701544,0.)); +#175352 = ORIENTED_EDGE('',*,*,#175353,.T.); +#175353 = EDGE_CURVE('',#175346,#175354,#175356,.T.); +#175354 = VERTEX_POINT('',#175355); +#175355 = CARTESIAN_POINT('',(85.342054,-96.960026,1.585)); +#175356 = LINE('',#175357,#175358); +#175357 = CARTESIAN_POINT('',(84.565019,-96.957144,1.585)); +#175358 = VECTOR('',#175359,1.); +#175359 = DIRECTION('',(0.999993121839,-3.708945127492E-03,0.)); +#175360 = ORIENTED_EDGE('',*,*,#175361,.T.); +#175361 = EDGE_CURVE('',#175354,#175362,#175364,.T.); +#175362 = VERTEX_POINT('',#175363); +#175363 = CARTESIAN_POINT('',(85.342054,-97.254262,1.585)); +#175364 = CIRCLE('',#175365,0.150000292066); +#175365 = AXIS2_PLACEMENT_3D('',#175366,#175367,#175368); +#175366 = CARTESIAN_POINT('',(85.31279,-97.107144,1.585)); +#175367 = DIRECTION('',(0.,0.,-1.)); +#175368 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#175369 = ORIENTED_EDGE('',*,*,#175370,.T.); +#175370 = EDGE_CURVE('',#175362,#175371,#175373,.T.); +#175371 = VERTEX_POINT('',#175372); +#175372 = CARTESIAN_POINT('',(82.683526,-97.254262,1.585)); +#175373 = LINE('',#175374,#175375); +#175374 = CARTESIAN_POINT('',(85.342054,-97.254262,1.585)); +#175375 = VECTOR('',#175376,1.); +#175376 = DIRECTION('',(-1.,0.,0.)); +#175377 = ORIENTED_EDGE('',*,*,#175378,.T.); +#175378 = EDGE_CURVE('',#175371,#175379,#175381,.T.); +#175379 = VERTEX_POINT('',#175380); +#175380 = CARTESIAN_POINT('',(82.58807,-97.023808,1.585)); +#175381 = CIRCLE('',#175382,0.150000415027); +#175382 = AXIS2_PLACEMENT_3D('',#175383,#175384,#175385); +#175383 = CARTESIAN_POINT('',(82.712790630259,-97.107144,1.585)); +#175384 = DIRECTION('',(0.,0.,-1.)); +#175385 = DIRECTION('',(-0.195096995257,-0.98078395299,-0.)); +#175386 = ORIENTED_EDGE('',*,*,#175387,.T.); +#175387 = EDGE_CURVE('',#175379,#175388,#175390,.T.); +#175388 = VERTEX_POINT('',#175389); +#175389 = CARTESIAN_POINT('',(82.614174,-96.997703,1.585)); +#175390 = LINE('',#175391,#175392); +#175391 = CARTESIAN_POINT('',(82.58807,-97.023808,1.585)); +#175392 = VECTOR('',#175393,1.); +#175393 = DIRECTION('',(0.707093237285,0.707120324829,0.)); +#175394 = ORIENTED_EDGE('',*,*,#175395,.T.); +#175395 = EDGE_CURVE('',#175388,#175396,#175398,.T.); +#175396 = VERTEX_POINT('',#175397); +#175397 = CARTESIAN_POINT('',(82.568116,-96.899144,1.585)); +#175398 = LINE('',#175399,#175400); +#175399 = CARTESIAN_POINT('',(82.614174,-96.997703,1.585)); +#175400 = VECTOR('',#175401,1.); +#175401 = DIRECTION('',(-0.423366981291,0.905958276717,0.)); +#175402 = ORIENTED_EDGE('',*,*,#175403,.T.); +#175403 = EDGE_CURVE('',#175396,#175404,#175406,.T.); +#175404 = VERTEX_POINT('',#175405); +#175405 = CARTESIAN_POINT('',(82.56279,-96.859525,1.585)); +#175406 = LINE('',#175407,#175408); +#175407 = CARTESIAN_POINT('',(82.568116,-96.899144,1.585)); +#175408 = VECTOR('',#175409,1.); +#175409 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#175410 = ORIENTED_EDGE('',*,*,#175411,.T.); +#175411 = EDGE_CURVE('',#175404,#175412,#175414,.T.); +#175412 = VERTEX_POINT('',#175413); +#175413 = CARTESIAN_POINT('',(82.565672,-96.335023,1.585)); +#175414 = LINE('',#175415,#175416); +#175415 = CARTESIAN_POINT('',(82.56279,-96.859525,1.585)); +#175416 = VECTOR('',#175417,1.); +#175417 = DIRECTION('',(5.494653012067E-03,0.99998490428,0.)); +#175418 = ORIENTED_EDGE('',*,*,#175419,.T.); +#175419 = EDGE_CURVE('',#175412,#175420,#175422,.T.); +#175420 = VERTEX_POINT('',#175421); +#175421 = CARTESIAN_POINT('',(82.578626,-96.297205,1.585)); +#175422 = LINE('',#175423,#175424); +#175423 = CARTESIAN_POINT('',(82.565672,-96.335023,1.585)); +#175424 = VECTOR('',#175425,1.); +#175425 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#175426 = ORIENTED_EDGE('',*,*,#175427,.T.); +#175427 = EDGE_CURVE('',#175420,#175428,#175430,.T.); +#175428 = VERTEX_POINT('',#175429); +#175429 = CARTESIAN_POINT('',(82.718101,-96.0247,1.585)); +#175430 = LINE('',#175431,#175432); +#175431 = CARTESIAN_POINT('',(82.578626,-96.297205,1.585)); +#175432 = VECTOR('',#175433,1.); +#175433 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#175434 = ORIENTED_EDGE('',*,*,#175435,.T.); +#175435 = EDGE_CURVE('',#175428,#175272,#175436,.T.); +#175436 = LINE('',#175437,#175438); +#175437 = CARTESIAN_POINT('',(82.718101,-96.0247,1.585)); +#175438 = VECTOR('',#175439,1.); +#175439 = DIRECTION('',(0.712484531253,0.701687817141,0.)); +#175440 = FACE_BOUND('',#175441,.F.); +#175441 = EDGE_LOOP('',(#175442,#175453,#175461,#175469,#175477,#175485, + #175493,#175501,#175509,#175517)); +#175442 = ORIENTED_EDGE('',*,*,#175443,.T.); +#175443 = EDGE_CURVE('',#175444,#175446,#175448,.T.); +#175444 = VERTEX_POINT('',#175445); +#175445 = CARTESIAN_POINT('',(84.10965,-96.116136,1.585)); +#175446 = VERTEX_POINT('',#175447); +#175447 = CARTESIAN_POINT('',(83.049263,-96.116135,1.585)); +#175448 = CIRCLE('',#175449,0.974528751426); +#175449 = AXIS2_PLACEMENT_3D('',#175450,#175451,#175452); +#175450 = CARTESIAN_POINT('',(83.579455728885,-96.93381584091,1.585)); +#175451 = DIRECTION('',(0.,0.,1.)); +#175452 = DIRECTION('',(0.544051953664,0.839051531025,-0.)); +#175453 = ORIENTED_EDGE('',*,*,#175454,.T.); +#175454 = EDGE_CURVE('',#175446,#175455,#175457,.T.); +#175455 = VERTEX_POINT('',#175456); +#175456 = CARTESIAN_POINT('',(82.959878,-96.205521,1.585)); +#175457 = LINE('',#175458,#175459); +#175458 = CARTESIAN_POINT('',(83.049263,-96.116135,1.585)); +#175459 = VECTOR('',#175460,1.); +#175460 = DIRECTION('',(-0.707102825798,-0.707110736553,0.)); +#175461 = ORIENTED_EDGE('',*,*,#175462,.T.); +#175462 = EDGE_CURVE('',#175455,#175463,#175465,.T.); +#175463 = VERTEX_POINT('',#175464); +#175464 = CARTESIAN_POINT('',(82.86279,-96.399697,1.585)); +#175465 = LINE('',#175466,#175467); +#175466 = CARTESIAN_POINT('',(82.959878,-96.205521,1.585)); +#175467 = VECTOR('',#175468,1.); +#175468 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#175469 = ORIENTED_EDGE('',*,*,#175470,.T.); +#175470 = EDGE_CURVE('',#175463,#175471,#175473,.T.); +#175471 = VERTEX_POINT('',#175472); +#175472 = CARTESIAN_POINT('',(82.86279,-96.824114,1.585)); +#175473 = LINE('',#175474,#175475); +#175474 = CARTESIAN_POINT('',(82.86279,-96.399697,1.585)); +#175475 = VECTOR('',#175476,1.); +#175476 = DIRECTION('',(0.,-1.,0.)); +#175477 = ORIENTED_EDGE('',*,*,#175478,.T.); +#175478 = EDGE_CURVE('',#175471,#175479,#175481,.T.); +#175479 = VERTEX_POINT('',#175480); +#175480 = CARTESIAN_POINT('',(82.929305,-96.957144,1.585)); +#175481 = LINE('',#175482,#175483); +#175482 = CARTESIAN_POINT('',(82.86279,-96.824114,1.585)); +#175483 = VECTOR('',#175484,1.); +#175484 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#175485 = ORIENTED_EDGE('',*,*,#175486,.T.); +#175486 = EDGE_CURVE('',#175479,#175487,#175489,.T.); +#175487 = VERTEX_POINT('',#175488); +#175488 = CARTESIAN_POINT('',(84.229609,-96.957144,1.585)); +#175489 = LINE('',#175490,#175491); +#175490 = CARTESIAN_POINT('',(82.929305,-96.957144,1.585)); +#175491 = VECTOR('',#175492,1.); +#175492 = DIRECTION('',(1.,0.,0.)); +#175493 = ORIENTED_EDGE('',*,*,#175494,.T.); +#175494 = EDGE_CURVE('',#175487,#175495,#175497,.T.); +#175495 = VERTEX_POINT('',#175496); +#175496 = CARTESIAN_POINT('',(84.296123,-96.824115,1.585)); +#175497 = LINE('',#175498,#175499); +#175498 = CARTESIAN_POINT('',(84.229609,-96.957144,1.585)); +#175499 = VECTOR('',#175500,1.); +#175500 = DIRECTION('',(0.447210906074,0.894428535708,0.)); +#175501 = ORIENTED_EDGE('',*,*,#175502,.T.); +#175502 = EDGE_CURVE('',#175495,#175503,#175505,.T.); +#175503 = VERTEX_POINT('',#175504); +#175504 = CARTESIAN_POINT('',(84.296123,-96.399696,1.585)); +#175505 = LINE('',#175506,#175507); +#175506 = CARTESIAN_POINT('',(84.296123,-96.824115,1.585)); +#175507 = VECTOR('',#175508,1.); +#175508 = DIRECTION('',(0.,1.,0.)); +#175509 = ORIENTED_EDGE('',*,*,#175510,.T.); +#175510 = EDGE_CURVE('',#175503,#175511,#175513,.T.); +#175511 = VERTEX_POINT('',#175512); +#175512 = CARTESIAN_POINT('',(84.199035,-96.205521,1.585)); +#175513 = LINE('',#175514,#175515); +#175514 = CARTESIAN_POINT('',(84.296123,-96.399696,1.585)); +#175515 = VECTOR('',#175516,1.); +#175516 = DIRECTION('',(-0.447215438015,0.89442626974,0.)); +#175517 = ORIENTED_EDGE('',*,*,#175518,.T.); +#175518 = EDGE_CURVE('',#175511,#175444,#175519,.T.); +#175519 = LINE('',#175520,#175521); +#175520 = CARTESIAN_POINT('',(84.199035,-96.205521,1.585)); +#175521 = VECTOR('',#175522,1.); +#175522 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#175523 = PLANE('',#175524); +#175524 = AXIS2_PLACEMENT_3D('',#175525,#175526,#175527); +#175525 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175526 = DIRECTION('',(0.,0.,1.)); +#175527 = DIRECTION('',(1.,0.,-0.)); +#175528 = SHELL_BASED_SURFACE_MODEL('',(#175529)); +#175529 = OPEN_SHELL('',(#175530)); +#175530 = ADVANCED_FACE('',(#175531),#175716,.T.); +#175531 = FACE_BOUND('',#175532,.F.); +#175532 = EDGE_LOOP('',(#175533,#175544,#175552,#175561,#175569,#175578, + #175586,#175595,#175603,#175611,#175619,#175628,#175636,#175645, + #175653,#175662,#175670,#175678,#175686,#175694,#175702,#175710)); +#175533 = ORIENTED_EDGE('',*,*,#175534,.T.); +#175534 = EDGE_CURVE('',#175535,#175537,#175539,.T.); +#175535 = VERTEX_POINT('',#175536); +#175536 = CARTESIAN_POINT('',(99.083078,-96.080381,1.585)); +#175537 = VERTEX_POINT('',#175538); +#175538 = CARTESIAN_POINT('',(99.542841,-96.083178,1.585)); +#175539 = CIRCLE('',#175540,0.460785175821); +#175540 = AXIS2_PLACEMENT_3D('',#175541,#175542,#175543); +#175541 = CARTESIAN_POINT('',(99.310530108972,-96.48111597024,1.585)); +#175542 = DIRECTION('',(0.,0.,-1.)); +#175543 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#175544 = ORIENTED_EDGE('',*,*,#175545,.T.); +#175545 = EDGE_CURVE('',#175537,#175546,#175548,.T.); +#175546 = VERTEX_POINT('',#175547); +#175547 = CARTESIAN_POINT('',(99.611152,-96.151489,1.585)); +#175548 = LINE('',#175549,#175550); +#175549 = CARTESIAN_POINT('',(99.542841,-96.083178,1.585)); +#175550 = VECTOR('',#175551,1.); +#175551 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#175552 = ORIENTED_EDGE('',*,*,#175553,.T.); +#175553 = EDGE_CURVE('',#175546,#175554,#175556,.T.); +#175554 = VERTEX_POINT('',#175555); +#175555 = CARTESIAN_POINT('',(99.495759,-96.24619,1.585)); +#175556 = CIRCLE('',#175557,7.500003178655E-02); +#175557 = AXIS2_PLACEMENT_3D('',#175558,#175559,#175560); +#175558 = CARTESIAN_POINT('',(99.548791562127,-96.1931565,1.585)); +#175559 = DIRECTION('',(0.,0.,-1.)); +#175560 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#175561 = ORIENTED_EDGE('',*,*,#175562,.T.); +#175562 = EDGE_CURVE('',#175554,#175563,#175565,.T.); +#175563 = VERTEX_POINT('',#175564); +#175564 = CARTESIAN_POINT('',(99.460659,-96.21109,1.585)); +#175565 = LINE('',#175566,#175567); +#175566 = CARTESIAN_POINT('',(99.495759,-96.24619,1.585)); +#175567 = VECTOR('',#175568,1.); +#175568 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#175569 = ORIENTED_EDGE('',*,*,#175570,.T.); +#175570 = EDGE_CURVE('',#175563,#175571,#175573,.T.); +#175571 = VERTEX_POINT('',#175572); +#175572 = CARTESIAN_POINT('',(99.160735,-96.21109,1.585)); +#175573 = CIRCLE('',#175574,0.299308637371); +#175574 = AXIS2_PLACEMENT_3D('',#175575,#175576,#175577); +#175575 = CARTESIAN_POINT('',(99.310697,-96.470121,1.585)); +#175576 = DIRECTION('',(0.,0.,1.)); +#175577 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#175578 = ORIENTED_EDGE('',*,*,#175579,.T.); +#175579 = EDGE_CURVE('',#175571,#175580,#175582,.T.); +#175580 = VERTEX_POINT('',#175581); +#175581 = CARTESIAN_POINT('',(99.086622,-96.285203,1.585)); +#175582 = LINE('',#175583,#175584); +#175583 = CARTESIAN_POINT('',(99.160735,-96.21109,1.585)); +#175584 = VECTOR('',#175585,1.); +#175585 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#175586 = ORIENTED_EDGE('',*,*,#175587,.T.); +#175587 = EDGE_CURVE('',#175580,#175588,#175590,.T.); +#175588 = VERTEX_POINT('',#175589); +#175589 = CARTESIAN_POINT('',(99.004745,-96.660113,1.585)); +#175590 = CIRCLE('',#175591,0.611712714363); +#175591 = AXIS2_PLACEMENT_3D('',#175592,#175593,#175594); +#175592 = CARTESIAN_POINT('',(99.613150275217,-96.5965876822,1.585)); +#175593 = DIRECTION('',(0.,0.,1.)); +#175594 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#175595 = ORIENTED_EDGE('',*,*,#175596,.T.); +#175596 = EDGE_CURVE('',#175588,#175597,#175599,.T.); +#175597 = VERTEX_POINT('',#175598); +#175598 = CARTESIAN_POINT('',(99.048128,-96.833647,1.585)); +#175599 = LINE('',#175600,#175601); +#175600 = CARTESIAN_POINT('',(99.004745,-96.660113,1.585)); +#175601 = VECTOR('',#175602,1.); +#175602 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#175603 = ORIENTED_EDGE('',*,*,#175604,.T.); +#175604 = EDGE_CURVE('',#175597,#175605,#175607,.T.); +#175605 = VERTEX_POINT('',#175606); +#175606 = CARTESIAN_POINT('',(99.086622,-96.910634,1.585)); +#175607 = LINE('',#175608,#175609); +#175608 = CARTESIAN_POINT('',(99.048128,-96.833647,1.585)); +#175609 = VECTOR('',#175610,1.); +#175610 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#175611 = ORIENTED_EDGE('',*,*,#175612,.T.); +#175612 = EDGE_CURVE('',#175605,#175613,#175615,.T.); +#175613 = VERTEX_POINT('',#175614); +#175614 = CARTESIAN_POINT('',(99.160735,-96.984748,1.585)); +#175615 = LINE('',#175616,#175617); +#175616 = CARTESIAN_POINT('',(99.086622,-96.910634,1.585)); +#175617 = VECTOR('',#175618,1.); +#175618 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#175619 = ORIENTED_EDGE('',*,*,#175620,.T.); +#175620 = EDGE_CURVE('',#175613,#175621,#175623,.T.); +#175621 = VERTEX_POINT('',#175622); +#175622 = CARTESIAN_POINT('',(99.460659,-96.984747,1.585)); +#175623 = CIRCLE('',#175624,0.299305962385); +#175624 = AXIS2_PLACEMENT_3D('',#175625,#175626,#175627); +#175625 = CARTESIAN_POINT('',(99.310696136355,-96.72571959093,1.585)); +#175626 = DIRECTION('',(0.,0.,1.)); +#175627 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#175628 = ORIENTED_EDGE('',*,*,#175629,.T.); +#175629 = EDGE_CURVE('',#175621,#175630,#175632,.T.); +#175630 = VERTEX_POINT('',#175631); +#175631 = CARTESIAN_POINT('',(99.507124,-96.94032,1.585)); +#175632 = LINE('',#175633,#175634); +#175633 = CARTESIAN_POINT('',(99.460659,-96.984747,1.585)); +#175634 = VECTOR('',#175635,1.); +#175635 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#175636 = ORIENTED_EDGE('',*,*,#175637,.T.); +#175637 = EDGE_CURVE('',#175630,#175638,#175640,.T.); +#175638 = VERTEX_POINT('',#175639); +#175639 = CARTESIAN_POINT('',(99.601825,-97.055713,1.585)); +#175640 = CIRCLE('',#175641,7.499993690112E-02); +#175641 = AXIS2_PLACEMENT_3D('',#175642,#175643,#175644); +#175642 = CARTESIAN_POINT('',(99.548792248309,-97.00267982374,1.585)); +#175643 = DIRECTION('',(0.,0.,-1.)); +#175644 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#175645 = ORIENTED_EDGE('',*,*,#175646,.T.); +#175646 = EDGE_CURVE('',#175638,#175647,#175649,.T.); +#175647 = VERTEX_POINT('',#175648); +#175648 = CARTESIAN_POINT('',(99.538315,-97.115457,1.585)); +#175649 = LINE('',#175650,#175651); +#175650 = CARTESIAN_POINT('',(99.601825,-97.055713,1.585)); +#175651 = VECTOR('',#175652,1.); +#175652 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#175653 = ORIENTED_EDGE('',*,*,#175654,.T.); +#175654 = EDGE_CURVE('',#175647,#175655,#175657,.T.); +#175655 = VERTEX_POINT('',#175656); +#175656 = CARTESIAN_POINT('',(99.078553,-97.112661,1.585)); +#175657 = CIRCLE('',#175658,0.461067828848); +#175658 = AXIS2_PLACEMENT_3D('',#175659,#175660,#175661); +#175659 = CARTESIAN_POINT('',(99.310864512688,-96.71439613352,1.585)); +#175660 = DIRECTION('',(-0.,0.,-1.)); +#175661 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#175662 = ORIENTED_EDGE('',*,*,#175663,.T.); +#175663 = EDGE_CURVE('',#175655,#175664,#175666,.T.); +#175664 = VERTEX_POINT('',#175665); +#175665 = CARTESIAN_POINT('',(98.961864,-96.994898,1.585)); +#175666 = LINE('',#175667,#175668); +#175667 = CARTESIAN_POINT('',(99.078553,-97.112661,1.585)); +#175668 = VECTOR('',#175669,1.); +#175669 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#175670 = ORIENTED_EDGE('',*,*,#175671,.T.); +#175671 = EDGE_CURVE('',#175664,#175672,#175674,.T.); +#175672 = VERTEX_POINT('',#175673); +#175673 = CARTESIAN_POINT('',(98.904603,-96.878013,1.585)); +#175674 = LINE('',#175675,#175676); +#175675 = CARTESIAN_POINT('',(98.961864,-96.994898,1.585)); +#175676 = VECTOR('',#175677,1.); +#175677 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#175678 = ORIENTED_EDGE('',*,*,#175679,.T.); +#175679 = EDGE_CURVE('',#175672,#175680,#175682,.T.); +#175680 = VERTEX_POINT('',#175681); +#175681 = CARTESIAN_POINT('',(98.854745,-96.669347,1.585)); +#175682 = LINE('',#175683,#175684); +#175683 = CARTESIAN_POINT('',(98.904603,-96.878013,1.585)); +#175684 = VECTOR('',#175685,1.); +#175685 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#175686 = ORIENTED_EDGE('',*,*,#175687,.T.); +#175687 = EDGE_CURVE('',#175680,#175688,#175690,.T.); +#175688 = VERTEX_POINT('',#175689); +#175689 = CARTESIAN_POINT('',(98.856984,-96.5083,1.585)); +#175690 = LINE('',#175691,#175692); +#175691 = CARTESIAN_POINT('',(98.854745,-96.669347,1.585)); +#175692 = VECTOR('',#175693,1.); +#175693 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#175694 = ORIENTED_EDGE('',*,*,#175695,.T.); +#175695 = EDGE_CURVE('',#175688,#175696,#175698,.T.); +#175696 = VERTEX_POINT('',#175697); +#175697 = CARTESIAN_POINT('',(98.910282,-96.302473,1.585)); +#175698 = LINE('',#175699,#175700); +#175699 = CARTESIAN_POINT('',(98.856984,-96.5083,1.585)); +#175700 = VECTOR('',#175701,1.); +#175701 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#175702 = ORIENTED_EDGE('',*,*,#175703,.T.); +#175703 = EDGE_CURVE('',#175696,#175704,#175706,.T.); +#175704 = VERTEX_POINT('',#175705); +#175705 = CARTESIAN_POINT('',(98.967231,-96.193492,1.585)); +#175706 = LINE('',#175707,#175708); +#175707 = CARTESIAN_POINT('',(98.910282,-96.302473,1.585)); +#175708 = VECTOR('',#175709,1.); +#175709 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#175710 = ORIENTED_EDGE('',*,*,#175711,.T.); +#175711 = EDGE_CURVE('',#175704,#175535,#175712,.T.); +#175712 = LINE('',#175713,#175714); +#175713 = CARTESIAN_POINT('',(98.967231,-96.193492,1.585)); +#175714 = VECTOR('',#175715,1.); +#175715 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#175716 = PLANE('',#175717); +#175717 = AXIS2_PLACEMENT_3D('',#175718,#175719,#175720); +#175718 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175719 = DIRECTION('',(0.,0.,1.)); +#175720 = DIRECTION('',(1.,0.,-0.)); +#175721 = SHELL_BASED_SURFACE_MODEL('',(#175722)); +#175722 = OPEN_SHELL('',(#175723)); +#175723 = ADVANCED_FACE('',(#175724),#175910,.T.); +#175724 = FACE_BOUND('',#175725,.F.); +#175725 = EDGE_LOOP('',(#175726,#175737,#175745,#175754,#175762,#175770, + #175779,#175787,#175796,#175804,#175812,#175820,#175829,#175837, + #175846,#175854,#175863,#175871,#175879,#175887,#175896,#175904)); +#175726 = ORIENTED_EDGE('',*,*,#175727,.T.); +#175727 = EDGE_CURVE('',#175728,#175730,#175732,.T.); +#175728 = VERTEX_POINT('',#175729); +#175729 = CARTESIAN_POINT('',(99.867494,-96.171478,1.585)); +#175730 = VERTEX_POINT('',#175731); +#175731 = CARTESIAN_POINT('',(99.882126,-96.022919,1.585)); +#175732 = CIRCLE('',#175733,7.500006711464E-02); +#175733 = AXIS2_PLACEMENT_3D('',#175734,#175735,#175736); +#175734 = CARTESIAN_POINT('',(99.882125932885,-96.09791906711,1.585)); +#175735 = DIRECTION('',(0.,0.,-1.)); +#175736 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#175737 = ORIENTED_EDGE('',*,*,#175738,.T.); +#175738 = EDGE_CURVE('',#175730,#175739,#175741,.T.); +#175739 = VERTEX_POINT('',#175740); +#175740 = CARTESIAN_POINT('',(100.508911,-96.023681,1.585)); +#175741 = LINE('',#175742,#175743); +#175742 = CARTESIAN_POINT('',(99.882126,-96.022919,1.585)); +#175743 = VECTOR('',#175744,1.); +#175744 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#175745 = ORIENTED_EDGE('',*,*,#175746,.T.); +#175746 = EDGE_CURVE('',#175739,#175747,#175749,.T.); +#175747 = VERTEX_POINT('',#175748); +#175748 = CARTESIAN_POINT('',(100.574732,-96.112551,1.585)); +#175749 = CIRCLE('',#175750,7.447391611624E-02); +#175750 = AXIS2_PLACEMENT_3D('',#175751,#175752,#175753); +#175751 = CARTESIAN_POINT('',(100.50173192664,-96.0978080874,1.585)); +#175752 = DIRECTION('',(0.,0.,-1.)); +#175753 = DIRECTION('',(9.639715124778E-02,0.995342950561,0.)); +#175754 = ORIENTED_EDGE('',*,*,#175755,.T.); +#175755 = EDGE_CURVE('',#175747,#175756,#175758,.T.); +#175756 = VERTEX_POINT('',#175757); +#175757 = CARTESIAN_POINT('',(100.557616,-96.147307,1.585)); +#175758 = LINE('',#175759,#175760); +#175759 = CARTESIAN_POINT('',(100.574732,-96.112551,1.585)); +#175760 = VECTOR('',#175761,1.); +#175761 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#175762 = ORIENTED_EDGE('',*,*,#175763,.T.); +#175763 = EDGE_CURVE('',#175756,#175764,#175766,.T.); +#175764 = VERTEX_POINT('',#175765); +#175765 = CARTESIAN_POINT('',(100.33072,-96.406616,1.585)); +#175766 = LINE('',#175767,#175768); +#175767 = CARTESIAN_POINT('',(100.557616,-96.147307,1.585)); +#175768 = VECTOR('',#175769,1.); +#175769 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#175770 = ORIENTED_EDGE('',*,*,#175771,.T.); +#175771 = EDGE_CURVE('',#175764,#175772,#175774,.T.); +#175772 = VERTEX_POINT('',#175773); +#175773 = CARTESIAN_POINT('',(100.574732,-96.654715,1.585)); +#175774 = CIRCLE('',#175775,0.348520834816); +#175775 = AXIS2_PLACEMENT_3D('',#175776,#175777,#175778); +#175776 = CARTESIAN_POINT('',(100.2374266174,-96.74241819931,1.585)); +#175777 = DIRECTION('',(0.,0.,-1.)); +#175778 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#175779 = ORIENTED_EDGE('',*,*,#175780,.T.); +#175780 = EDGE_CURVE('',#175772,#175781,#175783,.T.); +#175781 = VERTEX_POINT('',#175782); +#175782 = CARTESIAN_POINT('',(100.57351,-96.927252,1.585)); +#175783 = LINE('',#175784,#175785); +#175784 = CARTESIAN_POINT('',(100.574732,-96.654715,1.585)); +#175785 = VECTOR('',#175786,1.); +#175786 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#175787 = ORIENTED_EDGE('',*,*,#175788,.T.); +#175788 = EDGE_CURVE('',#175781,#175789,#175791,.T.); +#175789 = VERTEX_POINT('',#175790); +#175790 = CARTESIAN_POINT('',(100.325329,-97.171478,1.585)); +#175791 = CIRCLE('',#175792,0.348635327447); +#175792 = AXIS2_PLACEMENT_3D('',#175793,#175794,#175795); +#175793 = CARTESIAN_POINT('',(100.23755748129,-96.83407208415,1.585)); +#175794 = DIRECTION('',(0.,0.,-1.)); +#175795 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#175796 = ORIENTED_EDGE('',*,*,#175797,.T.); +#175797 = EDGE_CURVE('',#175789,#175798,#175800,.T.); +#175798 = VERTEX_POINT('',#175799); +#175799 = CARTESIAN_POINT('',(100.005173,-97.170256,1.585)); +#175800 = LINE('',#175801,#175802); +#175801 = CARTESIAN_POINT('',(100.325329,-97.171478,1.585)); +#175802 = VECTOR('',#175803,1.); +#175803 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#175804 = ORIENTED_EDGE('',*,*,#175805,.T.); +#175805 = EDGE_CURVE('',#175798,#175806,#175808,.T.); +#175806 = VERTEX_POINT('',#175807); +#175807 = CARTESIAN_POINT('',(99.88246,-97.10805,1.585)); +#175808 = LINE('',#175809,#175810); +#175809 = CARTESIAN_POINT('',(100.005173,-97.170256,1.585)); +#175810 = VECTOR('',#175811,1.); +#175811 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#175812 = ORIENTED_EDGE('',*,*,#175813,.T.); +#175813 = EDGE_CURVE('',#175806,#175814,#175816,.T.); +#175814 = VERTEX_POINT('',#175815); +#175815 = CARTESIAN_POINT('',(99.819765,-97.044347,1.585)); +#175816 = LINE('',#175817,#175818); +#175817 = CARTESIAN_POINT('',(99.88246,-97.10805,1.585)); +#175818 = VECTOR('',#175819,1.); +#175819 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#175820 = ORIENTED_EDGE('',*,*,#175821,.T.); +#175821 = EDGE_CURVE('',#175814,#175822,#175824,.T.); +#175822 = VERTEX_POINT('',#175823); +#175823 = CARTESIAN_POINT('',(99.93516,-96.949648,1.585)); +#175824 = CIRCLE('',#175825,7.50001266804E-02); +#175825 = AXIS2_PLACEMENT_3D('',#175826,#175827,#175828); +#175826 = CARTESIAN_POINT('',(99.882126051994,-97.00268024831,1.585)); +#175827 = DIRECTION('',(0.,0.,-1.)); +#175828 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#175829 = ORIENTED_EDGE('',*,*,#175830,.T.); +#175830 = EDGE_CURVE('',#175822,#175831,#175833,.T.); +#175831 = VERTEX_POINT('',#175832); +#175832 = CARTESIAN_POINT('',(99.974172,-96.988661,1.585)); +#175833 = LINE('',#175834,#175835); +#175834 = CARTESIAN_POINT('',(99.93516,-96.949648,1.585)); +#175835 = VECTOR('',#175836,1.); +#175836 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#175837 = ORIENTED_EDGE('',*,*,#175838,.T.); +#175838 = EDGE_CURVE('',#175831,#175839,#175841,.T.); +#175839 = VERTEX_POINT('',#175840); +#175840 = CARTESIAN_POINT('',(100.361507,-96.988661,1.585)); +#175841 = CIRCLE('',#175842,0.358502380266); +#175842 = AXIS2_PLACEMENT_3D('',#175843,#175844,#175845); +#175843 = CARTESIAN_POINT('',(100.1678395,-96.686971,1.585)); +#175844 = DIRECTION('',(0.,0.,1.)); +#175845 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#175846 = ORIENTED_EDGE('',*,*,#175847,.T.); +#175847 = EDGE_CURVE('',#175839,#175848,#175850,.T.); +#175848 = VERTEX_POINT('',#175849); +#175849 = CARTESIAN_POINT('',(100.391914,-96.958253,1.585)); +#175850 = LINE('',#175851,#175852); +#175851 = CARTESIAN_POINT('',(100.361507,-96.988661,1.585)); +#175852 = VECTOR('',#175853,1.); +#175853 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#175854 = ORIENTED_EDGE('',*,*,#175855,.T.); +#175855 = EDGE_CURVE('',#175848,#175856,#175858,.T.); +#175856 = VERTEX_POINT('',#175857); +#175857 = CARTESIAN_POINT('',(100.391915,-96.618536,1.585)); +#175858 = CIRCLE('',#175859,0.305616146029); +#175859 = AXIS2_PLACEMENT_3D('',#175860,#175861,#175862); +#175860 = CARTESIAN_POINT('',(100.13784892049,-96.78839375212,1.585)); +#175861 = DIRECTION('',(0.,-0.,1.)); +#175862 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#175863 = ORIENTED_EDGE('',*,*,#175864,.T.); +#175864 = EDGE_CURVE('',#175856,#175865,#175867,.T.); +#175865 = VERTEX_POINT('',#175866); +#175866 = CARTESIAN_POINT('',(100.361508,-96.588129,1.585)); +#175867 = LINE('',#175868,#175869); +#175868 = CARTESIAN_POINT('',(100.391915,-96.618536,1.585)); +#175869 = VECTOR('',#175870,1.); +#175870 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#175871 = ORIENTED_EDGE('',*,*,#175872,.T.); +#175872 = EDGE_CURVE('',#175865,#175873,#175875,.T.); +#175873 = VERTEX_POINT('',#175874); +#175874 = CARTESIAN_POINT('',(100.292992,-96.553871,1.585)); +#175875 = LINE('',#175876,#175877); +#175876 = CARTESIAN_POINT('',(100.361508,-96.588129,1.585)); +#175877 = VECTOR('',#175878,1.); +#175878 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#175879 = ORIENTED_EDGE('',*,*,#175880,.T.); +#175880 = EDGE_CURVE('',#175873,#175881,#175883,.T.); +#175881 = VERTEX_POINT('',#175882); +#175882 = CARTESIAN_POINT('',(100.153208,-96.55243,1.585)); +#175883 = LINE('',#175884,#175885); +#175884 = CARTESIAN_POINT('',(100.292992,-96.553871,1.585)); +#175885 = VECTOR('',#175886,1.); +#175886 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#175887 = ORIENTED_EDGE('',*,*,#175888,.T.); +#175888 = EDGE_CURVE('',#175881,#175889,#175891,.T.); +#175889 = VERTEX_POINT('',#175890); +#175890 = CARTESIAN_POINT('',(100.111397,-96.429483,1.585)); +#175891 = CIRCLE('',#175892,7.500015628755E-02); +#175892 = AXIS2_PLACEMENT_3D('',#175893,#175894,#175895); +#175893 = CARTESIAN_POINT('',(100.16784028432,-96.4788710461,1.585)); +#175894 = DIRECTION('',(0.,0.,-1.)); +#175895 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#175896 = ORIENTED_EDGE('',*,*,#175897,.T.); +#175897 = EDGE_CURVE('',#175889,#175898,#175900,.T.); +#175898 = VERTEX_POINT('',#175899); +#175899 = CARTESIAN_POINT('',(100.335891,-96.172919,1.585)); +#175900 = LINE('',#175901,#175902); +#175901 = CARTESIAN_POINT('',(100.111397,-96.429483,1.585)); +#175902 = VECTOR('',#175903,1.); +#175903 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#175904 = ORIENTED_EDGE('',*,*,#175905,.T.); +#175905 = EDGE_CURVE('',#175898,#175728,#175906,.T.); +#175906 = LINE('',#175907,#175908); +#175907 = CARTESIAN_POINT('',(100.335891,-96.172919,1.585)); +#175908 = VECTOR('',#175909,1.); +#175909 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#175910 = PLANE('',#175911); +#175911 = AXIS2_PLACEMENT_3D('',#175912,#175913,#175914); +#175912 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175913 = DIRECTION('',(0.,0.,1.)); +#175914 = DIRECTION('',(1.,0.,-0.)); +#175915 = SHELL_BASED_SURFACE_MODEL('',(#175916)); +#175916 = OPEN_SHELL('',(#175917)); +#175917 = ADVANCED_FACE('',(#175918,#176020),#176122,.T.); +#175918 = FACE_BOUND('',#175919,.F.); +#175919 = EDGE_LOOP('',(#175920,#175931,#175939,#175947,#175956,#175964, + #175972,#175981,#175989,#175997,#176006,#176014)); +#175920 = ORIENTED_EDGE('',*,*,#175921,.T.); +#175921 = EDGE_CURVE('',#175922,#175924,#175926,.T.); +#175922 = VERTEX_POINT('',#175923); +#175923 = CARTESIAN_POINT('',(100.985142,-96.08242,1.585)); +#175924 = VERTEX_POINT('',#175925); +#175925 = CARTESIAN_POINT('',(101.35798,-96.087786,1.585)); +#175926 = CIRCLE('',#175927,0.291788488016); +#175927 = AXIS2_PLACEMENT_3D('',#175928,#175929,#175930); +#175928 = CARTESIAN_POINT('',(101.16833086911,-96.30953750256,1.585)); +#175929 = DIRECTION('',(0.,0.,-1.)); +#175930 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#175931 = ORIENTED_EDGE('',*,*,#175932,.T.); +#175932 = EDGE_CURVE('',#175924,#175933,#175935,.T.); +#175933 = VERTEX_POINT('',#175934); +#175934 = CARTESIAN_POINT('',(101.421433,-96.153316,1.585)); +#175935 = LINE('',#175936,#175937); +#175936 = CARTESIAN_POINT('',(101.35798,-96.087786,1.585)); +#175937 = VECTOR('',#175938,1.); +#175938 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#175939 = ORIENTED_EDGE('',*,*,#175940,.T.); +#175940 = EDGE_CURVE('',#175933,#175941,#175943,.T.); +#175941 = VERTEX_POINT('',#175942); +#175942 = CARTESIAN_POINT('',(101.478696,-96.270205,1.585)); +#175943 = LINE('',#175944,#175945); +#175944 = CARTESIAN_POINT('',(101.421433,-96.153316,1.585)); +#175945 = VECTOR('',#175946,1.); +#175946 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#175947 = ORIENTED_EDGE('',*,*,#175948,.T.); +#175948 = EDGE_CURVE('',#175941,#175949,#175951,.T.); +#175949 = VERTEX_POINT('',#175950); +#175950 = CARTESIAN_POINT('',(101.473017,-96.940983,1.585)); +#175951 = CIRCLE('',#175952,0.967158496826); +#175952 = AXIS2_PLACEMENT_3D('',#175953,#175954,#175955); +#175953 = CARTESIAN_POINT('',(100.56874970686,-96.59791417228,1.585)); +#175954 = DIRECTION('',(0.,0.,-1.)); +#175955 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#175956 = ORIENTED_EDGE('',*,*,#175957,.T.); +#175957 = EDGE_CURVE('',#175949,#175958,#175960,.T.); +#175958 = VERTEX_POINT('',#175959); +#175959 = CARTESIAN_POINT('',(101.416067,-97.049963,1.585)); +#175960 = LINE('',#175961,#175962); +#175961 = CARTESIAN_POINT('',(101.473017,-96.940983,1.585)); +#175962 = VECTOR('',#175963,1.); +#175963 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#175964 = ORIENTED_EDGE('',*,*,#175965,.T.); +#175965 = EDGE_CURVE('',#175958,#175966,#175968,.T.); +#175966 = VERTEX_POINT('',#175967); +#175967 = CARTESIAN_POINT('',(101.350537,-97.113417,1.585)); +#175968 = LINE('',#175969,#175970); +#175969 = CARTESIAN_POINT('',(101.416067,-97.049963,1.585)); +#175970 = VECTOR('',#175971,1.); +#175971 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#175972 = ORIENTED_EDGE('',*,*,#175973,.T.); +#175973 = EDGE_CURVE('',#175966,#175974,#175976,.T.); +#175974 = VERTEX_POINT('',#175975); +#175975 = CARTESIAN_POINT('',(100.977698,-97.10805,1.585)); +#175976 = CIRCLE('',#175977,0.290998264264); +#175977 = AXIS2_PLACEMENT_3D('',#175978,#175979,#175980); +#175978 = CARTESIAN_POINT('',(101.16733341815,-96.88732755441,1.585)); +#175979 = DIRECTION('',(-0.,0.,-1.)); +#175980 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#175981 = ORIENTED_EDGE('',*,*,#175982,.T.); +#175982 = EDGE_CURVE('',#175974,#175983,#175985,.T.); +#175983 = VERTEX_POINT('',#175984); +#175984 = CARTESIAN_POINT('',(100.914245,-97.042517,1.585)); +#175985 = LINE('',#175986,#175987); +#175986 = CARTESIAN_POINT('',(100.977698,-97.10805,1.585)); +#175987 = VECTOR('',#175988,1.); +#175988 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#175989 = ORIENTED_EDGE('',*,*,#175990,.T.); +#175990 = EDGE_CURVE('',#175983,#175991,#175993,.T.); +#175991 = VERTEX_POINT('',#175992); +#175992 = CARTESIAN_POINT('',(100.856984,-96.925632,1.585)); +#175993 = LINE('',#175994,#175995); +#175994 = CARTESIAN_POINT('',(100.914245,-97.042517,1.585)); +#175995 = VECTOR('',#175996,1.); +#175996 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#175997 = ORIENTED_EDGE('',*,*,#175998,.T.); +#175998 = EDGE_CURVE('',#175991,#175999,#176001,.T.); +#175999 = VERTEX_POINT('',#176000); +#176000 = CARTESIAN_POINT('',(100.862663,-96.254854,1.585)); +#176001 = CIRCLE('',#176002,0.967158496826); +#176002 = AXIS2_PLACEMENT_3D('',#176003,#176004,#176005); +#176003 = CARTESIAN_POINT('',(101.76693029313,-96.59792282772,1.585)); +#176004 = DIRECTION('',(0.,0.,-1.)); +#176005 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#176006 = ORIENTED_EDGE('',*,*,#176007,.T.); +#176007 = EDGE_CURVE('',#175999,#176008,#176010,.T.); +#176008 = VERTEX_POINT('',#176009); +#176009 = CARTESIAN_POINT('',(100.919612,-96.145873,1.585)); +#176010 = LINE('',#176011,#176012); +#176011 = CARTESIAN_POINT('',(100.862663,-96.254854,1.585)); +#176012 = VECTOR('',#176013,1.); +#176013 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#176014 = ORIENTED_EDGE('',*,*,#176015,.T.); +#176015 = EDGE_CURVE('',#176008,#175922,#176016,.T.); +#176016 = LINE('',#176017,#176018); +#176017 = CARTESIAN_POINT('',(100.919612,-96.145873,1.585)); +#176018 = VECTOR('',#176019,1.); +#176019 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#176020 = FACE_BOUND('',#176021,.F.); +#176021 = EDGE_LOOP('',(#176022,#176033,#176041,#176049,#176058,#176066, + #176074,#176083,#176091,#176099,#176108,#176116)); +#176022 = ORIENTED_EDGE('',*,*,#176023,.T.); +#176023 = EDGE_CURVE('',#176024,#176026,#176028,.T.); +#176024 = VERTEX_POINT('',#176025); +#176025 = CARTESIAN_POINT('',(101.26627,-96.207177,1.585)); +#176026 = VERTEX_POINT('',#176027); +#176027 = CARTESIAN_POINT('',(101.06941,-96.207177,1.585)); +#176028 = CIRCLE('',#176029,0.148516804184); +#176029 = AXIS2_PLACEMENT_3D('',#176030,#176031,#176032); +#176030 = CARTESIAN_POINT('',(101.16784,-96.318392,1.585)); +#176031 = DIRECTION('',(0.,0.,1.)); +#176032 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#176033 = ORIENTED_EDGE('',*,*,#176034,.T.); +#176034 = EDGE_CURVE('',#176026,#176035,#176037,.T.); +#176035 = VERTEX_POINT('',#176036); +#176036 = CARTESIAN_POINT('',(101.039003,-96.237584,1.585)); +#176037 = LINE('',#176038,#176039); +#176038 = CARTESIAN_POINT('',(101.06941,-96.207177,1.585)); +#176039 = VECTOR('',#176040,1.); +#176040 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#176041 = ORIENTED_EDGE('',*,*,#176042,.T.); +#176042 = EDGE_CURVE('',#176035,#176043,#176045,.T.); +#176043 = VERTEX_POINT('',#176044); +#176044 = CARTESIAN_POINT('',(101.000509,-96.314571,1.585)); +#176045 = LINE('',#176046,#176047); +#176046 = CARTESIAN_POINT('',(101.039003,-96.237584,1.585)); +#176047 = VECTOR('',#176048,1.); +#176048 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#176049 = ORIENTED_EDGE('',*,*,#176050,.T.); +#176050 = EDGE_CURVE('',#176043,#176051,#176053,.T.); +#176051 = VERTEX_POINT('',#176052); +#176052 = CARTESIAN_POINT('',(101.000509,-96.881266,1.585)); +#176053 = CIRCLE('',#176054,0.815450468384); +#176054 = AXIS2_PLACEMENT_3D('',#176055,#176056,#176057); +#176055 = CARTESIAN_POINT('',(101.76514856255,-96.5979185,1.585)); +#176056 = DIRECTION('',(0.,0.,1.)); +#176057 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#176058 = ORIENTED_EDGE('',*,*,#176059,.T.); +#176059 = EDGE_CURVE('',#176051,#176060,#176062,.T.); +#176060 = VERTEX_POINT('',#176061); +#176061 = CARTESIAN_POINT('',(101.039003,-96.958253,1.585)); +#176062 = LINE('',#176063,#176064); +#176063 = CARTESIAN_POINT('',(101.000509,-96.881266,1.585)); +#176064 = VECTOR('',#176065,1.); +#176065 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#176066 = ORIENTED_EDGE('',*,*,#176067,.T.); +#176067 = EDGE_CURVE('',#176060,#176068,#176070,.T.); +#176068 = VERTEX_POINT('',#176069); +#176069 = CARTESIAN_POINT('',(101.06941,-96.988661,1.585)); +#176070 = LINE('',#176071,#176072); +#176071 = CARTESIAN_POINT('',(101.039003,-96.958253,1.585)); +#176072 = VECTOR('',#176073,1.); +#176073 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#176074 = ORIENTED_EDGE('',*,*,#176075,.T.); +#176075 = EDGE_CURVE('',#176068,#176076,#176078,.T.); +#176076 = VERTEX_POINT('',#176077); +#176077 = CARTESIAN_POINT('',(101.266269,-96.988661,1.585)); +#176078 = CIRCLE('',#176079,0.14851572397); +#176079 = AXIS2_PLACEMENT_3D('',#176080,#176081,#176082); +#176080 = CARTESIAN_POINT('',(101.1678395,-96.877447,1.585)); +#176081 = DIRECTION('',(0.,0.,1.)); +#176082 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#176083 = ORIENTED_EDGE('',*,*,#176084,.T.); +#176084 = EDGE_CURVE('',#176076,#176085,#176087,.T.); +#176085 = VERTEX_POINT('',#176086); +#176086 = CARTESIAN_POINT('',(101.296676,-96.958253,1.585)); +#176087 = LINE('',#176088,#176089); +#176088 = CARTESIAN_POINT('',(101.266269,-96.988661,1.585)); +#176089 = VECTOR('',#176090,1.); +#176090 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#176091 = ORIENTED_EDGE('',*,*,#176092,.T.); +#176092 = EDGE_CURVE('',#176085,#176093,#176095,.T.); +#176093 = VERTEX_POINT('',#176094); +#176094 = CARTESIAN_POINT('',(101.33517,-96.881266,1.585)); +#176095 = LINE('',#176096,#176097); +#176096 = CARTESIAN_POINT('',(101.296676,-96.958253,1.585)); +#176097 = VECTOR('',#176098,1.); +#176098 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#176099 = ORIENTED_EDGE('',*,*,#176100,.T.); +#176100 = EDGE_CURVE('',#176093,#176101,#176103,.T.); +#176101 = VERTEX_POINT('',#176102); +#176102 = CARTESIAN_POINT('',(101.33517,-96.314571,1.585)); +#176103 = CIRCLE('',#176104,0.815433004022); +#176104 = AXIS2_PLACEMENT_3D('',#176105,#176106,#176107); +#176105 = CARTESIAN_POINT('',(100.57054906235,-96.5979185,1.585)); +#176106 = DIRECTION('',(0.,-0.,1.)); +#176107 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#176108 = ORIENTED_EDGE('',*,*,#176109,.T.); +#176109 = EDGE_CURVE('',#176101,#176110,#176112,.T.); +#176110 = VERTEX_POINT('',#176111); +#176111 = CARTESIAN_POINT('',(101.296677,-96.237584,1.585)); +#176112 = LINE('',#176113,#176114); +#176113 = CARTESIAN_POINT('',(101.33517,-96.314571,1.585)); +#176114 = VECTOR('',#176115,1.); +#176115 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#176116 = ORIENTED_EDGE('',*,*,#176117,.T.); +#176117 = EDGE_CURVE('',#176110,#176024,#176118,.T.); +#176118 = LINE('',#176119,#176120); +#176119 = CARTESIAN_POINT('',(101.296677,-96.237584,1.585)); +#176120 = VECTOR('',#176121,1.); +#176121 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176122 = PLANE('',#176123); +#176123 = AXIS2_PLACEMENT_3D('',#176124,#176125,#176126); +#176124 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176125 = DIRECTION('',(0.,0.,1.)); +#176126 = DIRECTION('',(1.,0.,-0.)); +#176127 = SHELL_BASED_SURFACE_MODEL('',(#176128)); +#176128 = OPEN_SHELL('',(#176129)); +#176129 = ADVANCED_FACE('',(#176130),#176166,.T.); +#176130 = FACE_BOUND('',#176131,.F.); +#176131 = EDGE_LOOP('',(#176132,#176143,#176151,#176160)); +#176132 = ORIENTED_EDGE('',*,*,#176133,.T.); +#176133 = EDGE_CURVE('',#176134,#176136,#176138,.T.); +#176134 = VERTEX_POINT('',#176135); +#176135 = CARTESIAN_POINT('',(129.930398,-97.1181,1.585)); +#176136 = VERTEX_POINT('',#176137); +#176137 = CARTESIAN_POINT('',(129.930398,-96.9981,1.585)); +#176138 = CIRCLE('',#176139,6.000000000042E-02); +#176139 = AXIS2_PLACEMENT_3D('',#176140,#176141,#176142); +#176140 = CARTESIAN_POINT('',(129.93039777441,-97.0581,1.585)); +#176141 = DIRECTION('',(0.,0.,-1.)); +#176142 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#176143 = ORIENTED_EDGE('',*,*,#176144,.T.); +#176144 = EDGE_CURVE('',#176136,#176145,#176147,.T.); +#176145 = VERTEX_POINT('',#176146); +#176146 = CARTESIAN_POINT('',(130.452902,-96.9981,1.585)); +#176147 = LINE('',#176148,#176149); +#176148 = CARTESIAN_POINT('',(129.930398,-96.9981,1.585)); +#176149 = VECTOR('',#176150,1.); +#176150 = DIRECTION('',(1.,0.,0.)); +#176151 = ORIENTED_EDGE('',*,*,#176152,.T.); +#176152 = EDGE_CURVE('',#176145,#176153,#176155,.T.); +#176153 = VERTEX_POINT('',#176154); +#176154 = CARTESIAN_POINT('',(130.452902,-97.1181,1.585)); +#176155 = CIRCLE('',#176156,6.000000000043E-02); +#176156 = AXIS2_PLACEMENT_3D('',#176157,#176158,#176159); +#176157 = CARTESIAN_POINT('',(130.45290222558,-97.0581,1.585)); +#176158 = DIRECTION('',(0.,0.,-1.)); +#176159 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#176160 = ORIENTED_EDGE('',*,*,#176161,.T.); +#176161 = EDGE_CURVE('',#176153,#176134,#176162,.T.); +#176162 = LINE('',#176163,#176164); +#176163 = CARTESIAN_POINT('',(130.452902,-97.1181,1.585)); +#176164 = VECTOR('',#176165,1.); +#176165 = DIRECTION('',(-1.,0.,0.)); +#176166 = PLANE('',#176167); +#176167 = AXIS2_PLACEMENT_3D('',#176168,#176169,#176170); +#176168 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176169 = DIRECTION('',(0.,0.,1.)); +#176170 = DIRECTION('',(1.,0.,-0.)); +#176171 = SHELL_BASED_SURFACE_MODEL('',(#176172)); +#176172 = OPEN_SHELL('',(#176173)); +#176173 = ADVANCED_FACE('',(#176174),#176243,.T.); +#176174 = FACE_BOUND('',#176175,.F.); +#176175 = EDGE_LOOP('',(#176176,#176187,#176195,#176203,#176212,#176220, + #176229,#176237)); +#176176 = ORIENTED_EDGE('',*,*,#176177,.T.); +#176177 = EDGE_CURVE('',#176178,#176180,#176182,.T.); +#176178 = VERTEX_POINT('',#176179); +#176179 = CARTESIAN_POINT('',(119.576217,-96.185139,1.585)); +#176180 = VERTEX_POINT('',#176181); +#176181 = CARTESIAN_POINT('',(119.69165,-96.2081,1.585)); +#176182 = CIRCLE('',#176183,6.000007318647E-02); +#176183 = AXIS2_PLACEMENT_3D('',#176184,#176185,#176186); +#176184 = CARTESIAN_POINT('',(119.63164992681,-96.20809982331,1.585)); +#176185 = DIRECTION('',(0.,0.,-1.)); +#176186 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176187 = ORIENTED_EDGE('',*,*,#176188,.T.); +#176188 = EDGE_CURVE('',#176180,#176189,#176191,.T.); +#176189 = VERTEX_POINT('',#176190); +#176190 = CARTESIAN_POINT('',(119.69165,-96.8731,1.585)); +#176191 = LINE('',#176192,#176193); +#176192 = CARTESIAN_POINT('',(119.69165,-96.2081,1.585)); +#176193 = VECTOR('',#176194,1.); +#176194 = DIRECTION('',(0.,-1.,0.)); +#176195 = ORIENTED_EDGE('',*,*,#176196,.T.); +#176196 = EDGE_CURVE('',#176189,#176197,#176199,.T.); +#176197 = VERTEX_POINT('',#176198); +#176198 = CARTESIAN_POINT('',(120.35665,-96.8731,1.585)); +#176199 = LINE('',#176200,#176201); +#176200 = CARTESIAN_POINT('',(119.69165,-96.8731,1.585)); +#176201 = VECTOR('',#176202,1.); +#176202 = DIRECTION('',(1.,0.,0.)); +#176203 = ORIENTED_EDGE('',*,*,#176204,.T.); +#176204 = EDGE_CURVE('',#176197,#176205,#176207,.T.); +#176205 = VERTEX_POINT('',#176206); +#176206 = CARTESIAN_POINT('',(120.35665,-96.9931,1.585)); +#176207 = CIRCLE('',#176208,6.000000000042E-02); +#176208 = AXIS2_PLACEMENT_3D('',#176209,#176210,#176211); +#176209 = CARTESIAN_POINT('',(120.35665022558,-96.9331,1.585)); +#176210 = DIRECTION('',(0.,0.,-1.)); +#176211 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#176212 = ORIENTED_EDGE('',*,*,#176213,.T.); +#176213 = EDGE_CURVE('',#176205,#176214,#176216,.T.); +#176214 = VERTEX_POINT('',#176215); +#176215 = CARTESIAN_POINT('',(119.63165,-96.9931,1.585)); +#176216 = LINE('',#176217,#176218); +#176217 = CARTESIAN_POINT('',(120.35665,-96.9931,1.585)); +#176218 = VECTOR('',#176219,1.); +#176219 = DIRECTION('',(-1.,0.,0.)); +#176220 = ORIENTED_EDGE('',*,*,#176221,.T.); +#176221 = EDGE_CURVE('',#176214,#176222,#176224,.T.); +#176222 = VERTEX_POINT('',#176223); +#176223 = CARTESIAN_POINT('',(119.57165,-96.9331,1.585)); +#176224 = CIRCLE('',#176225,5.999932016258E-02); +#176225 = AXIS2_PLACEMENT_3D('',#176226,#176227,#176228); +#176226 = CARTESIAN_POINT('',(119.63164932015,-96.93310067984,1.585)); +#176227 = DIRECTION('',(0.,0.,-1.)); +#176228 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#176229 = ORIENTED_EDGE('',*,*,#176230,.T.); +#176230 = EDGE_CURVE('',#176222,#176231,#176233,.T.); +#176231 = VERTEX_POINT('',#176232); +#176232 = CARTESIAN_POINT('',(119.57165,-96.2081,1.585)); +#176233 = LINE('',#176234,#176235); +#176234 = CARTESIAN_POINT('',(119.57165,-96.9331,1.585)); +#176235 = VECTOR('',#176236,1.); +#176236 = DIRECTION('',(0.,1.,0.)); +#176237 = ORIENTED_EDGE('',*,*,#176238,.T.); +#176238 = EDGE_CURVE('',#176231,#176178,#176239,.T.); +#176239 = LINE('',#176240,#176241); +#176240 = CARTESIAN_POINT('',(119.57165,-96.2081,1.585)); +#176241 = VECTOR('',#176242,1.); +#176242 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176243 = PLANE('',#176244); +#176244 = AXIS2_PLACEMENT_3D('',#176245,#176246,#176247); +#176245 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176246 = DIRECTION('',(0.,0.,1.)); +#176247 = DIRECTION('',(1.,0.,-0.)); +#176248 = SHELL_BASED_SURFACE_MODEL('',(#176249)); +#176249 = OPEN_SHELL('',(#176250)); +#176250 = ADVANCED_FACE('',(#176251),#176320,.T.); +#176251 = FACE_BOUND('',#176252,.F.); +#176252 = EDGE_LOOP('',(#176253,#176264,#176272,#176281,#176289,#176298, + #176306,#176314)); +#176253 = ORIENTED_EDGE('',*,*,#176254,.T.); +#176254 = EDGE_CURVE('',#176255,#176257,#176259,.T.); +#176255 = VERTEX_POINT('',#176256); +#176256 = CARTESIAN_POINT('',(123.796217,-96.185139,1.585)); +#176257 = VERTEX_POINT('',#176258); +#176258 = CARTESIAN_POINT('',(123.91165,-96.2081,1.585)); +#176259 = CIRCLE('',#176260,6.000007318647E-02); +#176260 = AXIS2_PLACEMENT_3D('',#176261,#176262,#176263); +#176261 = CARTESIAN_POINT('',(123.85164992681,-96.20809982331,1.585)); +#176262 = DIRECTION('',(0.,0.,-1.)); +#176263 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176264 = ORIENTED_EDGE('',*,*,#176265,.T.); +#176265 = EDGE_CURVE('',#176257,#176266,#176268,.T.); +#176266 = VERTEX_POINT('',#176267); +#176267 = CARTESIAN_POINT('',(123.91165,-96.9331,1.585)); +#176268 = LINE('',#176269,#176270); +#176269 = CARTESIAN_POINT('',(123.91165,-96.2081,1.585)); +#176270 = VECTOR('',#176271,1.); +#176271 = DIRECTION('',(0.,-1.,0.)); +#176272 = ORIENTED_EDGE('',*,*,#176273,.T.); +#176273 = EDGE_CURVE('',#176266,#176274,#176276,.T.); +#176274 = VERTEX_POINT('',#176275); +#176275 = CARTESIAN_POINT('',(123.85165,-96.9931,1.585)); +#176276 = CIRCLE('',#176277,5.999932016258E-02); +#176277 = AXIS2_PLACEMENT_3D('',#176278,#176279,#176280); +#176278 = CARTESIAN_POINT('',(123.85165067984,-96.93310067984,1.585)); +#176279 = DIRECTION('',(0.,0.,-1.)); +#176280 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#176281 = ORIENTED_EDGE('',*,*,#176282,.T.); +#176282 = EDGE_CURVE('',#176274,#176283,#176285,.T.); +#176283 = VERTEX_POINT('',#176284); +#176284 = CARTESIAN_POINT('',(123.12665,-96.9931,1.585)); +#176285 = LINE('',#176286,#176287); +#176286 = CARTESIAN_POINT('',(123.85165,-96.9931,1.585)); +#176287 = VECTOR('',#176288,1.); +#176288 = DIRECTION('',(-1.,0.,0.)); +#176289 = ORIENTED_EDGE('',*,*,#176290,.T.); +#176290 = EDGE_CURVE('',#176283,#176291,#176293,.T.); +#176291 = VERTEX_POINT('',#176292); +#176292 = CARTESIAN_POINT('',(123.12665,-96.8731,1.585)); +#176293 = CIRCLE('',#176294,6.000000000043E-02); +#176294 = AXIS2_PLACEMENT_3D('',#176295,#176296,#176297); +#176295 = CARTESIAN_POINT('',(123.12664977441,-96.9331,1.585)); +#176296 = DIRECTION('',(0.,0.,-1.)); +#176297 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#176298 = ORIENTED_EDGE('',*,*,#176299,.T.); +#176299 = EDGE_CURVE('',#176291,#176300,#176302,.T.); +#176300 = VERTEX_POINT('',#176301); +#176301 = CARTESIAN_POINT('',(123.79165,-96.8731,1.585)); +#176302 = LINE('',#176303,#176304); +#176303 = CARTESIAN_POINT('',(123.12665,-96.8731,1.585)); +#176304 = VECTOR('',#176305,1.); +#176305 = DIRECTION('',(1.,0.,0.)); +#176306 = ORIENTED_EDGE('',*,*,#176307,.T.); +#176307 = EDGE_CURVE('',#176300,#176308,#176310,.T.); +#176308 = VERTEX_POINT('',#176309); +#176309 = CARTESIAN_POINT('',(123.79165,-96.2081,1.585)); +#176310 = LINE('',#176311,#176312); +#176311 = CARTESIAN_POINT('',(123.79165,-96.8731,1.585)); +#176312 = VECTOR('',#176313,1.); +#176313 = DIRECTION('',(0.,1.,0.)); +#176314 = ORIENTED_EDGE('',*,*,#176315,.T.); +#176315 = EDGE_CURVE('',#176308,#176255,#176316,.T.); +#176316 = LINE('',#176317,#176318); +#176317 = CARTESIAN_POINT('',(123.79165,-96.2081,1.585)); +#176318 = VECTOR('',#176319,1.); +#176319 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176320 = PLANE('',#176321); +#176321 = AXIS2_PLACEMENT_3D('',#176322,#176323,#176324); +#176322 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176323 = DIRECTION('',(0.,0.,1.)); +#176324 = DIRECTION('',(1.,0.,-0.)); +#176325 = SHELL_BASED_SURFACE_MODEL('',(#176326)); +#176326 = OPEN_SHELL('',(#176327)); +#176327 = ADVANCED_FACE('',(#176328),#176364,.T.); +#176328 = FACE_BOUND('',#176329,.F.); +#176329 = EDGE_LOOP('',(#176330,#176341,#176349,#176358)); +#176330 = ORIENTED_EDGE('',*,*,#176331,.T.); +#176331 = EDGE_CURVE('',#176332,#176334,#176336,.T.); +#176332 = VERTEX_POINT('',#176333); +#176333 = CARTESIAN_POINT('',(112.27607,-96.8731,1.585)); +#176334 = VERTEX_POINT('',#176335); +#176335 = CARTESIAN_POINT('',(112.27607,-96.7531,1.585)); +#176336 = CIRCLE('',#176337,6.000000000042E-02); +#176337 = AXIS2_PLACEMENT_3D('',#176338,#176339,#176340); +#176338 = CARTESIAN_POINT('',(112.27606977441,-96.8131,1.585)); +#176339 = DIRECTION('',(0.,0.,-1.)); +#176340 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#176341 = ORIENTED_EDGE('',*,*,#176342,.T.); +#176342 = EDGE_CURVE('',#176334,#176343,#176345,.T.); +#176343 = VERTEX_POINT('',#176344); +#176344 = CARTESIAN_POINT('',(112.55723,-96.7531,1.585)); +#176345 = LINE('',#176346,#176347); +#176346 = CARTESIAN_POINT('',(112.27607,-96.7531,1.585)); +#176347 = VECTOR('',#176348,1.); +#176348 = DIRECTION('',(1.,0.,0.)); +#176349 = ORIENTED_EDGE('',*,*,#176350,.T.); +#176350 = EDGE_CURVE('',#176343,#176351,#176353,.T.); +#176351 = VERTEX_POINT('',#176352); +#176352 = CARTESIAN_POINT('',(112.55723,-96.8731,1.585)); +#176353 = CIRCLE('',#176354,6.000000000042E-02); +#176354 = AXIS2_PLACEMENT_3D('',#176355,#176356,#176357); +#176355 = CARTESIAN_POINT('',(112.55723022558,-96.8131,1.585)); +#176356 = DIRECTION('',(0.,0.,-1.)); +#176357 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#176358 = ORIENTED_EDGE('',*,*,#176359,.T.); +#176359 = EDGE_CURVE('',#176351,#176332,#176360,.T.); +#176360 = LINE('',#176361,#176362); +#176361 = CARTESIAN_POINT('',(112.55723,-96.8731,1.585)); +#176362 = VECTOR('',#176363,1.); +#176363 = DIRECTION('',(-1.,0.,0.)); +#176364 = PLANE('',#176365); +#176365 = AXIS2_PLACEMENT_3D('',#176366,#176367,#176368); +#176366 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176367 = DIRECTION('',(0.,0.,1.)); +#176368 = DIRECTION('',(1.,0.,-0.)); +#176369 = SHELL_BASED_SURFACE_MODEL('',(#176370)); +#176370 = OPEN_SHELL('',(#176371)); +#176371 = ADVANCED_FACE('',(#176372),#176416,.T.); +#176372 = FACE_BOUND('',#176373,.F.); +#176373 = EDGE_LOOP('',(#176374,#176385,#176393,#176402,#176410)); +#176374 = ORIENTED_EDGE('',*,*,#176375,.T.); +#176375 = EDGE_CURVE('',#176376,#176378,#176380,.T.); +#176376 = VERTEX_POINT('',#176377); +#176377 = CARTESIAN_POINT('',(105.376217,-95.910139,1.585)); +#176378 = VERTEX_POINT('',#176379); +#176379 = CARTESIAN_POINT('',(105.49165,-95.9331,1.585)); +#176380 = CIRCLE('',#176381,6.000007318648E-02); +#176381 = AXIS2_PLACEMENT_3D('',#176382,#176383,#176384); +#176382 = CARTESIAN_POINT('',(105.43164992681,-95.93309982331,1.585)); +#176383 = DIRECTION('',(0.,0.,-1.)); +#176384 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176385 = ORIENTED_EDGE('',*,*,#176386,.T.); +#176386 = EDGE_CURVE('',#176378,#176387,#176389,.T.); +#176387 = VERTEX_POINT('',#176388); +#176388 = CARTESIAN_POINT('',(105.49165,-96.7131,1.585)); +#176389 = LINE('',#176390,#176391); +#176390 = CARTESIAN_POINT('',(105.49165,-95.9331,1.585)); +#176391 = VECTOR('',#176392,1.); +#176392 = DIRECTION('',(0.,-1.,0.)); +#176393 = ORIENTED_EDGE('',*,*,#176394,.T.); +#176394 = EDGE_CURVE('',#176387,#176395,#176397,.T.); +#176395 = VERTEX_POINT('',#176396); +#176396 = CARTESIAN_POINT('',(105.37165,-96.7131,1.585)); +#176397 = CIRCLE('',#176398,6.000000000043E-02); +#176398 = AXIS2_PLACEMENT_3D('',#176399,#176400,#176401); +#176399 = CARTESIAN_POINT('',(105.43165,-96.71310022558,1.585)); +#176400 = DIRECTION('',(0.,0.,-1.)); +#176401 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#176402 = ORIENTED_EDGE('',*,*,#176403,.T.); +#176403 = EDGE_CURVE('',#176395,#176404,#176406,.T.); +#176404 = VERTEX_POINT('',#176405); +#176405 = CARTESIAN_POINT('',(105.37165,-95.9331,1.585)); +#176406 = LINE('',#176407,#176408); +#176407 = CARTESIAN_POINT('',(105.37165,-96.7131,1.585)); +#176408 = VECTOR('',#176409,1.); +#176409 = DIRECTION('',(0.,1.,0.)); +#176410 = ORIENTED_EDGE('',*,*,#176411,.T.); +#176411 = EDGE_CURVE('',#176404,#176376,#176412,.T.); +#176412 = LINE('',#176413,#176414); +#176413 = CARTESIAN_POINT('',(105.37165,-95.9331,1.585)); +#176414 = VECTOR('',#176415,1.); +#176415 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176416 = PLANE('',#176417); +#176417 = AXIS2_PLACEMENT_3D('',#176418,#176419,#176420); +#176418 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176419 = DIRECTION('',(0.,0.,1.)); +#176420 = DIRECTION('',(1.,0.,-0.)); +#176421 = SHELL_BASED_SURFACE_MODEL('',(#176422)); +#176422 = OPEN_SHELL('',(#176423)); +#176423 = ADVANCED_FACE('',(#176424),#176567,.T.); +#176424 = FACE_BOUND('',#176425,.F.); +#176425 = EDGE_LOOP('',(#176426,#176437,#176445,#176453,#176462,#176470, + #176478,#176487,#176495,#176504,#176512,#176520,#176528,#176537, + #176545,#176553,#176561)); +#176426 = ORIENTED_EDGE('',*,*,#176427,.T.); +#176427 = EDGE_CURVE('',#176428,#176430,#176432,.T.); +#176428 = VERTEX_POINT('',#176429); +#176429 = CARTESIAN_POINT('',(181.451467,-95.903597,1.585)); +#176430 = VERTEX_POINT('',#176431); +#176431 = CARTESIAN_POINT('',(181.568135,-95.965957,1.585)); +#176432 = CIRCLE('',#176433,7.500000000003E-02); +#176433 = AXIS2_PLACEMENT_3D('',#176434,#176435,#176436); +#176434 = CARTESIAN_POINT('',(181.493135,-95.96595706555,1.585)); +#176435 = DIRECTION('',(0.,0.,-1.)); +#176436 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#176437 = ORIENTED_EDGE('',*,*,#176438,.T.); +#176438 = EDGE_CURVE('',#176430,#176439,#176441,.T.); +#176439 = VERTEX_POINT('',#176440); +#176440 = CARTESIAN_POINT('',(181.568135,-96.033814,1.585)); +#176441 = LINE('',#176442,#176443); +#176442 = CARTESIAN_POINT('',(181.568135,-95.965957,1.585)); +#176443 = VECTOR('',#176444,1.); +#176444 = DIRECTION('',(0.,-1.,0.)); +#176445 = ORIENTED_EDGE('',*,*,#176446,.T.); +#176446 = EDGE_CURVE('',#176439,#176447,#176449,.T.); +#176447 = VERTEX_POINT('',#176448); +#176448 = CARTESIAN_POINT('',(181.841101,-96.035255,1.585)); +#176449 = LINE('',#176450,#176451); +#176450 = CARTESIAN_POINT('',(181.568135,-96.033814,1.585)); +#176451 = VECTOR('',#176452,1.); +#176452 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#176453 = ORIENTED_EDGE('',*,*,#176454,.T.); +#176454 = EDGE_CURVE('',#176447,#176455,#176457,.T.); +#176455 = VERTEX_POINT('',#176456); +#176456 = CARTESIAN_POINT('',(181.826469,-96.183814,1.585)); +#176457 = CIRCLE('',#176458,7.500006711464E-02); +#176458 = AXIS2_PLACEMENT_3D('',#176459,#176460,#176461); +#176459 = CARTESIAN_POINT('',(181.82646906711,-96.10881393288,1.585)); +#176460 = DIRECTION('',(0.,0.,-1.)); +#176461 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#176462 = ORIENTED_EDGE('',*,*,#176463,.T.); +#176463 = EDGE_CURVE('',#176455,#176464,#176466,.T.); +#176464 = VERTEX_POINT('',#176465); +#176465 = CARTESIAN_POINT('',(181.568135,-96.183814,1.585)); +#176466 = LINE('',#176467,#176468); +#176467 = CARTESIAN_POINT('',(181.826469,-96.183814,1.585)); +#176468 = VECTOR('',#176469,1.); +#176469 = DIRECTION('',(-1.,0.,0.)); +#176470 = ORIENTED_EDGE('',*,*,#176471,.T.); +#176471 = EDGE_CURVE('',#176464,#176472,#176474,.T.); +#176472 = VERTEX_POINT('',#176473); +#176473 = CARTESIAN_POINT('',(181.566694,-96.599636,1.585)); +#176474 = LINE('',#176475,#176476); +#176475 = CARTESIAN_POINT('',(181.568135,-96.183814,1.585)); +#176476 = VECTOR('',#176477,1.); +#176477 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#176478 = ORIENTED_EDGE('',*,*,#176479,.T.); +#176479 = EDGE_CURVE('',#176472,#176480,#176482,.T.); +#176480 = VERTEX_POINT('',#176481); +#176481 = CARTESIAN_POINT('',(181.469417,-96.656155,1.585)); +#176482 = CIRCLE('',#176483,7.5000413282E-02); +#176483 = AXIS2_PLACEMENT_3D('',#176484,#176485,#176486); +#176484 = CARTESIAN_POINT('',(181.49313481481,-96.58500356113,1.585)); +#176485 = DIRECTION('',(0.,0.,-1.)); +#176486 = DIRECTION('',(0.980783731279,-0.195098109827,0.)); +#176487 = ORIENTED_EDGE('',*,*,#176488,.T.); +#176488 = EDGE_CURVE('',#176480,#176489,#176491,.T.); +#176489 = VERTEX_POINT('',#176490); +#176490 = CARTESIAN_POINT('',(180.741707,-96.412066,1.585)); +#176491 = LINE('',#176492,#176493); +#176492 = CARTESIAN_POINT('',(181.469417,-96.656155,1.585)); +#176493 = VECTOR('',#176494,1.); +#176494 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#176495 = ORIENTED_EDGE('',*,*,#176496,.T.); +#176496 = EDGE_CURVE('',#176489,#176497,#176499,.T.); +#176497 = VERTEX_POINT('',#176498); +#176498 = CARTESIAN_POINT('',(180.802567,-96.275758,1.585)); +#176499 = CIRCLE('',#176500,7.500001519551E-02); +#176500 = AXIS2_PLACEMENT_3D('',#176501,#176502,#176503); +#176501 = CARTESIAN_POINT('',(180.77885009996,-96.34690932417,1.585)); +#176502 = DIRECTION('',(0.,0.,-1.)); +#176503 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#176504 = ORIENTED_EDGE('',*,*,#176505,.T.); +#176505 = EDGE_CURVE('',#176497,#176506,#176508,.T.); +#176506 = VERTEX_POINT('',#176507); +#176507 = CARTESIAN_POINT('',(181.418135,-96.480947,1.585)); +#176508 = LINE('',#176509,#176510); +#176509 = CARTESIAN_POINT('',(180.802567,-96.275758,1.585)); +#176510 = VECTOR('',#176511,1.); +#176511 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#176512 = ORIENTED_EDGE('',*,*,#176513,.T.); +#176513 = EDGE_CURVE('',#176506,#176514,#176516,.T.); +#176514 = VERTEX_POINT('',#176515); +#176515 = CARTESIAN_POINT('',(181.418135,-96.183814,1.585)); +#176516 = LINE('',#176517,#176518); +#176517 = CARTESIAN_POINT('',(181.418135,-96.480947,1.585)); +#176518 = VECTOR('',#176519,1.); +#176519 = DIRECTION('',(0.,1.,0.)); +#176520 = ORIENTED_EDGE('',*,*,#176521,.T.); +#176521 = EDGE_CURVE('',#176514,#176522,#176524,.T.); +#176522 = VERTEX_POINT('',#176523); +#176523 = CARTESIAN_POINT('',(181.14517,-96.182373,1.585)); +#176524 = LINE('',#176525,#176526); +#176525 = CARTESIAN_POINT('',(181.418135,-96.183814,1.585)); +#176526 = VECTOR('',#176527,1.); +#176527 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#176528 = ORIENTED_EDGE('',*,*,#176529,.T.); +#176529 = EDGE_CURVE('',#176522,#176530,#176532,.T.); +#176530 = VERTEX_POINT('',#176531); +#176531 = CARTESIAN_POINT('',(181.159802,-96.033814,1.585)); +#176532 = CIRCLE('',#176533,7.500006711462E-02); +#176533 = AXIS2_PLACEMENT_3D('',#176534,#176535,#176536); +#176534 = CARTESIAN_POINT('',(181.15980193288,-96.10881406711,1.585)); +#176535 = DIRECTION('',(0.,0.,-1.)); +#176536 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#176537 = ORIENTED_EDGE('',*,*,#176538,.T.); +#176538 = EDGE_CURVE('',#176530,#176539,#176541,.T.); +#176539 = VERTEX_POINT('',#176540); +#176540 = CARTESIAN_POINT('',(181.418135,-96.033814,1.585)); +#176541 = LINE('',#176542,#176543); +#176542 = CARTESIAN_POINT('',(181.159802,-96.033814,1.585)); +#176543 = VECTOR('',#176544,1.); +#176544 = DIRECTION('',(1.,0.,0.)); +#176545 = ORIENTED_EDGE('',*,*,#176546,.T.); +#176546 = EDGE_CURVE('',#176539,#176547,#176549,.T.); +#176547 = VERTEX_POINT('',#176548); +#176548 = CARTESIAN_POINT('',(181.419576,-95.951325,1.585)); +#176549 = LINE('',#176550,#176551); +#176550 = CARTESIAN_POINT('',(181.418135,-96.033814,1.585)); +#176551 = VECTOR('',#176552,1.); +#176552 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#176553 = ORIENTED_EDGE('',*,*,#176554,.T.); +#176554 = EDGE_CURVE('',#176547,#176555,#176557,.T.); +#176555 = VERTEX_POINT('',#176556); +#176556 = CARTESIAN_POINT('',(181.430775,-95.924289,1.585)); +#176557 = LINE('',#176558,#176559); +#176558 = CARTESIAN_POINT('',(181.419576,-95.951325,1.585)); +#176559 = VECTOR('',#176560,1.); +#176560 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#176561 = ORIENTED_EDGE('',*,*,#176562,.T.); +#176562 = EDGE_CURVE('',#176555,#176428,#176563,.T.); +#176563 = LINE('',#176564,#176565); +#176564 = CARTESIAN_POINT('',(181.430775,-95.924289,1.585)); +#176565 = VECTOR('',#176566,1.); +#176566 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176567 = PLANE('',#176568); +#176568 = AXIS2_PLACEMENT_3D('',#176569,#176570,#176571); +#176569 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176570 = DIRECTION('',(0.,0.,1.)); +#176571 = DIRECTION('',(1.,0.,-0.)); +#176572 = SHELL_BASED_SURFACE_MODEL('',(#176573)); +#176573 = OPEN_SHELL('',(#176574)); +#176574 = ADVANCED_FACE('',(#176575),#176619,.T.); +#176575 = FACE_BOUND('',#176576,.F.); +#176576 = EDGE_LOOP('',(#176577,#176588,#176596,#176605,#176613)); +#176577 = ORIENTED_EDGE('',*,*,#176578,.T.); +#176578 = EDGE_CURVE('',#176579,#176581,#176583,.T.); +#176579 = VERTEX_POINT('',#176580); +#176580 = CARTESIAN_POINT('',(178.901217,-96.038887,1.585)); +#176581 = VERTEX_POINT('',#176582); +#176582 = CARTESIAN_POINT('',(179.01665,-96.061848,1.585)); +#176583 = CIRCLE('',#176584,6.000007318647E-02); +#176584 = AXIS2_PLACEMENT_3D('',#176585,#176586,#176587); +#176585 = CARTESIAN_POINT('',(178.95664992681,-96.06184782331,1.585)); +#176586 = DIRECTION('',(0.,0.,-1.)); +#176587 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176588 = ORIENTED_EDGE('',*,*,#176589,.T.); +#176589 = EDGE_CURVE('',#176581,#176590,#176592,.T.); +#176590 = VERTEX_POINT('',#176591); +#176591 = CARTESIAN_POINT('',(179.01665,-96.584352,1.585)); +#176592 = LINE('',#176593,#176594); +#176593 = CARTESIAN_POINT('',(179.01665,-96.061848,1.585)); +#176594 = VECTOR('',#176595,1.); +#176595 = DIRECTION('',(0.,-1.,0.)); +#176596 = ORIENTED_EDGE('',*,*,#176597,.T.); +#176597 = EDGE_CURVE('',#176590,#176598,#176600,.T.); +#176598 = VERTEX_POINT('',#176599); +#176599 = CARTESIAN_POINT('',(178.89665,-96.584352,1.585)); +#176600 = CIRCLE('',#176601,6.000000000043E-02); +#176601 = AXIS2_PLACEMENT_3D('',#176602,#176603,#176604); +#176602 = CARTESIAN_POINT('',(178.95665,-96.58435222558,1.585)); +#176603 = DIRECTION('',(0.,0.,-1.)); +#176604 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#176605 = ORIENTED_EDGE('',*,*,#176606,.T.); +#176606 = EDGE_CURVE('',#176598,#176607,#176609,.T.); +#176607 = VERTEX_POINT('',#176608); +#176608 = CARTESIAN_POINT('',(178.89665,-96.061848,1.585)); +#176609 = LINE('',#176610,#176611); +#176610 = CARTESIAN_POINT('',(178.89665,-96.584352,1.585)); +#176611 = VECTOR('',#176612,1.); +#176612 = DIRECTION('',(0.,1.,0.)); +#176613 = ORIENTED_EDGE('',*,*,#176614,.T.); +#176614 = EDGE_CURVE('',#176607,#176579,#176615,.T.); +#176615 = LINE('',#176616,#176617); +#176616 = CARTESIAN_POINT('',(178.89665,-96.061848,1.585)); +#176617 = VECTOR('',#176618,1.); +#176618 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176619 = PLANE('',#176620); +#176620 = AXIS2_PLACEMENT_3D('',#176621,#176622,#176623); +#176621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176622 = DIRECTION('',(0.,0.,1.)); +#176623 = DIRECTION('',(1.,0.,-0.)); +#176624 = SHELL_BASED_SURFACE_MODEL('',(#176625)); +#176625 = OPEN_SHELL('',(#176626)); +#176626 = ADVANCED_FACE('',(#176627),#176671,.T.); +#176627 = FACE_BOUND('',#176628,.F.); +#176628 = EDGE_LOOP('',(#176629,#176640,#176648,#176657,#176665)); +#176629 = ORIENTED_EDGE('',*,*,#176630,.T.); +#176630 = EDGE_CURVE('',#176631,#176633,#176635,.T.); +#176631 = VERTEX_POINT('',#176632); +#176632 = CARTESIAN_POINT('',(180.371217,-96.038887,1.585)); +#176633 = VERTEX_POINT('',#176634); +#176634 = CARTESIAN_POINT('',(180.48665,-96.061848,1.585)); +#176635 = CIRCLE('',#176636,6.000007318647E-02); +#176636 = AXIS2_PLACEMENT_3D('',#176637,#176638,#176639); +#176637 = CARTESIAN_POINT('',(180.42664992681,-96.06184782331,1.585)); +#176638 = DIRECTION('',(0.,0.,-1.)); +#176639 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176640 = ORIENTED_EDGE('',*,*,#176641,.T.); +#176641 = EDGE_CURVE('',#176633,#176642,#176644,.T.); +#176642 = VERTEX_POINT('',#176643); +#176643 = CARTESIAN_POINT('',(180.48665,-96.584352,1.585)); +#176644 = LINE('',#176645,#176646); +#176645 = CARTESIAN_POINT('',(180.48665,-96.061848,1.585)); +#176646 = VECTOR('',#176647,1.); +#176647 = DIRECTION('',(0.,-1.,0.)); +#176648 = ORIENTED_EDGE('',*,*,#176649,.T.); +#176649 = EDGE_CURVE('',#176642,#176650,#176652,.T.); +#176650 = VERTEX_POINT('',#176651); +#176651 = CARTESIAN_POINT('',(180.36665,-96.584352,1.585)); +#176652 = CIRCLE('',#176653,6.000000000043E-02); +#176653 = AXIS2_PLACEMENT_3D('',#176654,#176655,#176656); +#176654 = CARTESIAN_POINT('',(180.42665,-96.58435222558,1.585)); +#176655 = DIRECTION('',(0.,0.,-1.)); +#176656 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#176657 = ORIENTED_EDGE('',*,*,#176658,.T.); +#176658 = EDGE_CURVE('',#176650,#176659,#176661,.T.); +#176659 = VERTEX_POINT('',#176660); +#176660 = CARTESIAN_POINT('',(180.36665,-96.061848,1.585)); +#176661 = LINE('',#176662,#176663); +#176662 = CARTESIAN_POINT('',(180.36665,-96.584352,1.585)); +#176663 = VECTOR('',#176664,1.); +#176664 = DIRECTION('',(0.,1.,0.)); +#176665 = ORIENTED_EDGE('',*,*,#176666,.T.); +#176666 = EDGE_CURVE('',#176659,#176631,#176667,.T.); +#176667 = LINE('',#176668,#176669); +#176668 = CARTESIAN_POINT('',(180.36665,-96.061848,1.585)); +#176669 = VECTOR('',#176670,1.); +#176670 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176671 = PLANE('',#176672); +#176672 = AXIS2_PLACEMENT_3D('',#176673,#176674,#176675); +#176673 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176674 = DIRECTION('',(0.,0.,1.)); +#176675 = DIRECTION('',(1.,0.,-0.)); +#176676 = SHELL_BASED_SURFACE_MODEL('',(#176677)); +#176677 = OPEN_SHELL('',(#176678)); +#176678 = ADVANCED_FACE('',(#176679),#176813,.T.); +#176679 = FACE_BOUND('',#176680,.F.); +#176680 = EDGE_LOOP('',(#176681,#176691,#176699,#176708,#176716,#176724, + #176733,#176741,#176750,#176758,#176766,#176774,#176782,#176791, + #176799,#176807)); +#176681 = ORIENTED_EDGE('',*,*,#176682,.T.); +#176682 = EDGE_CURVE('',#176683,#176685,#176687,.T.); +#176683 = VERTEX_POINT('',#176684); +#176684 = CARTESIAN_POINT('',(113.339752,-95.294941,1.585)); +#176685 = VERTEX_POINT('',#176686); +#176686 = CARTESIAN_POINT('',(113.378208,-95.27436,1.585)); +#176687 = LINE('',#176688,#176689); +#176688 = CARTESIAN_POINT('',(113.339752,-95.294941,1.585)); +#176689 = VECTOR('',#176690,1.); +#176690 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#176691 = ORIENTED_EDGE('',*,*,#176692,.T.); +#176692 = EDGE_CURVE('',#176685,#176693,#176695,.T.); +#176693 = VERTEX_POINT('',#176694); +#176694 = CARTESIAN_POINT('',(113.400045,-95.27436,1.585)); +#176695 = LINE('',#176696,#176697); +#176696 = CARTESIAN_POINT('',(113.378208,-95.27436,1.585)); +#176697 = VECTOR('',#176698,1.); +#176698 = DIRECTION('',(1.,0.,0.)); +#176699 = ORIENTED_EDGE('',*,*,#176700,.T.); +#176700 = EDGE_CURVE('',#176693,#176701,#176703,.T.); +#176701 = VERTEX_POINT('',#176702); +#176702 = CARTESIAN_POINT('',(113.46784,-95.347919,1.585)); +#176703 = CIRCLE('',#176704,7.21689809423E-02); +#176704 = AXIS2_PLACEMENT_3D('',#176705,#176706,#176707); +#176705 = CARTESIAN_POINT('',(113.39568706389,-95.34639728342,1.585)); +#176706 = DIRECTION('',(0.,0.,-1.)); +#176707 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#176708 = ORIENTED_EDGE('',*,*,#176709,.T.); +#176709 = EDGE_CURVE('',#176701,#176710,#176712,.T.); +#176710 = VERTEX_POINT('',#176711); +#176711 = CARTESIAN_POINT('',(113.46784,-96.272919,1.585)); +#176712 = LINE('',#176713,#176714); +#176713 = CARTESIAN_POINT('',(113.46784,-95.347919,1.585)); +#176714 = VECTOR('',#176715,1.); +#176715 = DIRECTION('',(0.,-1.,0.)); +#176716 = ORIENTED_EDGE('',*,*,#176717,.T.); +#176717 = EDGE_CURVE('',#176710,#176718,#176720,.T.); +#176718 = VERTEX_POINT('',#176719); +#176719 = CARTESIAN_POINT('',(113.693186,-96.27436,1.585)); +#176720 = LINE('',#176721,#176722); +#176721 = CARTESIAN_POINT('',(113.46784,-96.272919,1.585)); +#176722 = VECTOR('',#176723,1.); +#176723 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#176724 = ORIENTED_EDGE('',*,*,#176725,.T.); +#176725 = EDGE_CURVE('',#176718,#176726,#176728,.T.); +#176726 = VERTEX_POINT('',#176727); +#176727 = CARTESIAN_POINT('',(113.678554,-96.422919,1.585)); +#176728 = CIRCLE('',#176729,7.500006711463E-02); +#176729 = AXIS2_PLACEMENT_3D('',#176730,#176731,#176732); +#176730 = CARTESIAN_POINT('',(113.67855406711,-96.34791893288,1.585)); +#176731 = DIRECTION('',(0.,0.,-1.)); +#176732 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#176733 = ORIENTED_EDGE('',*,*,#176734,.T.); +#176734 = EDGE_CURVE('',#176726,#176735,#176737,.T.); +#176735 = VERTEX_POINT('',#176736); +#176736 = CARTESIAN_POINT('',(113.092494,-96.421478,1.585)); +#176737 = LINE('',#176738,#176739); +#176738 = CARTESIAN_POINT('',(113.678554,-96.422919,1.585)); +#176739 = VECTOR('',#176740,1.); +#176740 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#176741 = ORIENTED_EDGE('',*,*,#176742,.T.); +#176742 = EDGE_CURVE('',#176735,#176743,#176745,.T.); +#176743 = VERTEX_POINT('',#176744); +#176744 = CARTESIAN_POINT('',(113.107126,-96.272919,1.585)); +#176745 = CIRCLE('',#176746,7.500006711463E-02); +#176746 = AXIS2_PLACEMENT_3D('',#176747,#176748,#176749); +#176747 = CARTESIAN_POINT('',(113.10712593288,-96.34791906711,1.585)); +#176748 = DIRECTION('',(0.,0.,-1.)); +#176749 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#176750 = ORIENTED_EDGE('',*,*,#176751,.T.); +#176751 = EDGE_CURVE('',#176743,#176752,#176754,.T.); +#176752 = VERTEX_POINT('',#176753); +#176753 = CARTESIAN_POINT('',(113.31784,-96.272919,1.585)); +#176754 = LINE('',#176755,#176756); +#176755 = CARTESIAN_POINT('',(113.107126,-96.272919,1.585)); +#176756 = VECTOR('',#176757,1.); +#176757 = DIRECTION('',(1.,0.,0.)); +#176758 = ORIENTED_EDGE('',*,*,#176759,.T.); +#176759 = EDGE_CURVE('',#176752,#176760,#176762,.T.); +#176760 = VERTEX_POINT('',#176761); +#176761 = CARTESIAN_POINT('',(113.31784,-95.576604,1.585)); +#176762 = LINE('',#176763,#176764); +#176763 = CARTESIAN_POINT('',(113.31784,-96.272919,1.585)); +#176764 = VECTOR('',#176765,1.); +#176765 = DIRECTION('',(0.,1.,0.)); +#176766 = ORIENTED_EDGE('',*,*,#176767,.T.); +#176767 = EDGE_CURVE('',#176760,#176768,#176770,.T.); +#176768 = VERTEX_POINT('',#176769); +#176769 = CARTESIAN_POINT('',(113.242204,-95.649131,1.585)); +#176770 = LINE('',#176771,#176772); +#176771 = CARTESIAN_POINT('',(113.31784,-95.576604,1.585)); +#176772 = VECTOR('',#176773,1.); +#176773 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#176774 = ORIENTED_EDGE('',*,*,#176775,.T.); +#176775 = EDGE_CURVE('',#176768,#176776,#176778,.T.); +#176776 = VERTEX_POINT('',#176777); +#176777 = CARTESIAN_POINT('',(113.126935,-95.70597,1.585)); +#176778 = LINE('',#176779,#176780); +#176779 = CARTESIAN_POINT('',(113.242204,-95.649131,1.585)); +#176780 = VECTOR('',#176781,1.); +#176781 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#176782 = ORIENTED_EDGE('',*,*,#176783,.T.); +#176783 = EDGE_CURVE('',#176776,#176784,#176786,.T.); +#176784 = VERTEX_POINT('',#176785); +#176785 = CARTESIAN_POINT('',(113.073585,-95.566551,1.585)); +#176786 = CIRCLE('',#176787,7.500005272361E-02); +#176787 = AXIS2_PLACEMENT_3D('',#176788,#176789,#176790); +#176788 = CARTESIAN_POINT('',(113.10712555676,-95.63363332972,1.585)); +#176789 = DIRECTION('',(0.,0.,-1.)); +#176790 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#176791 = ORIENTED_EDGE('',*,*,#176792,.T.); +#176792 = EDGE_CURVE('',#176784,#176793,#176795,.T.); +#176793 = VERTEX_POINT('',#176794); +#176794 = CARTESIAN_POINT('',(113.157937,-95.524375,1.585)); +#176795 = LINE('',#176796,#176797); +#176796 = CARTESIAN_POINT('',(113.073585,-95.566551,1.585)); +#176797 = VECTOR('',#176798,1.); +#176798 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#176799 = ORIENTED_EDGE('',*,*,#176800,.T.); +#176800 = EDGE_CURVE('',#176793,#176801,#176803,.T.); +#176801 = VERTEX_POINT('',#176802); +#176802 = CARTESIAN_POINT('',(113.239316,-95.442996,1.585)); +#176803 = LINE('',#176804,#176805); +#176804 = CARTESIAN_POINT('',(113.157937,-95.524375,1.585)); +#176805 = VECTOR('',#176806,1.); +#176806 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#176807 = ORIENTED_EDGE('',*,*,#176808,.T.); +#176808 = EDGE_CURVE('',#176801,#176683,#176809,.T.); +#176809 = LINE('',#176810,#176811); +#176810 = CARTESIAN_POINT('',(113.239316,-95.442996,1.585)); +#176811 = VECTOR('',#176812,1.); +#176812 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#176813 = PLANE('',#176814); +#176814 = AXIS2_PLACEMENT_3D('',#176815,#176816,#176817); +#176815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176816 = DIRECTION('',(0.,0.,1.)); +#176817 = DIRECTION('',(1.,0.,-0.)); +#176818 = SHELL_BASED_SURFACE_MODEL('',(#176819)); +#176819 = OPEN_SHELL('',(#176820)); +#176820 = ADVANCED_FACE('',(#176821),#177006,.T.); +#176821 = FACE_BOUND('',#176822,.F.); +#176822 = EDGE_LOOP('',(#176823,#176834,#176842,#176851,#176859,#176868, + #176876,#176885,#176893,#176901,#176909,#176918,#176926,#176935, + #176943,#176952,#176960,#176968,#176976,#176984,#176992,#177000)); +#176823 = ORIENTED_EDGE('',*,*,#176824,.T.); +#176824 = EDGE_CURVE('',#176825,#176827,#176829,.T.); +#176825 = VERTEX_POINT('',#176826); +#176826 = CARTESIAN_POINT('',(111.308078,-95.330381,1.585)); +#176827 = VERTEX_POINT('',#176828); +#176828 = CARTESIAN_POINT('',(111.767841,-95.333178,1.585)); +#176829 = CIRCLE('',#176830,0.460785175821); +#176830 = AXIS2_PLACEMENT_3D('',#176831,#176832,#176833); +#176831 = CARTESIAN_POINT('',(111.53553010897,-95.73111597024,1.585)); +#176832 = DIRECTION('',(0.,0.,-1.)); +#176833 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#176834 = ORIENTED_EDGE('',*,*,#176835,.T.); +#176835 = EDGE_CURVE('',#176827,#176836,#176838,.T.); +#176836 = VERTEX_POINT('',#176837); +#176837 = CARTESIAN_POINT('',(111.836152,-95.401489,1.585)); +#176838 = LINE('',#176839,#176840); +#176839 = CARTESIAN_POINT('',(111.767841,-95.333178,1.585)); +#176840 = VECTOR('',#176841,1.); +#176841 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176842 = ORIENTED_EDGE('',*,*,#176843,.T.); +#176843 = EDGE_CURVE('',#176836,#176844,#176846,.T.); +#176844 = VERTEX_POINT('',#176845); +#176845 = CARTESIAN_POINT('',(111.720759,-95.49619,1.585)); +#176846 = CIRCLE('',#176847,7.500003178655E-02); +#176847 = AXIS2_PLACEMENT_3D('',#176848,#176849,#176850); +#176848 = CARTESIAN_POINT('',(111.77379156212,-95.4431565,1.585)); +#176849 = DIRECTION('',(0.,0.,-1.)); +#176850 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#176851 = ORIENTED_EDGE('',*,*,#176852,.T.); +#176852 = EDGE_CURVE('',#176844,#176853,#176855,.T.); +#176853 = VERTEX_POINT('',#176854); +#176854 = CARTESIAN_POINT('',(111.685659,-95.46109,1.585)); +#176855 = LINE('',#176856,#176857); +#176856 = CARTESIAN_POINT('',(111.720759,-95.49619,1.585)); +#176857 = VECTOR('',#176858,1.); +#176858 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176859 = ORIENTED_EDGE('',*,*,#176860,.T.); +#176860 = EDGE_CURVE('',#176853,#176861,#176863,.T.); +#176861 = VERTEX_POINT('',#176862); +#176862 = CARTESIAN_POINT('',(111.385735,-95.46109,1.585)); +#176863 = CIRCLE('',#176864,0.299308637371); +#176864 = AXIS2_PLACEMENT_3D('',#176865,#176866,#176867); +#176865 = CARTESIAN_POINT('',(111.535697,-95.720121,1.585)); +#176866 = DIRECTION('',(0.,0.,1.)); +#176867 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#176868 = ORIENTED_EDGE('',*,*,#176869,.T.); +#176869 = EDGE_CURVE('',#176861,#176870,#176872,.T.); +#176870 = VERTEX_POINT('',#176871); +#176871 = CARTESIAN_POINT('',(111.311622,-95.535203,1.585)); +#176872 = LINE('',#176873,#176874); +#176873 = CARTESIAN_POINT('',(111.385735,-95.46109,1.585)); +#176874 = VECTOR('',#176875,1.); +#176875 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#176876 = ORIENTED_EDGE('',*,*,#176877,.T.); +#176877 = EDGE_CURVE('',#176870,#176878,#176880,.T.); +#176878 = VERTEX_POINT('',#176879); +#176879 = CARTESIAN_POINT('',(111.229745,-95.910113,1.585)); +#176880 = CIRCLE('',#176881,0.611712714363); +#176881 = AXIS2_PLACEMENT_3D('',#176882,#176883,#176884); +#176882 = CARTESIAN_POINT('',(111.83815027521,-95.8465876822,1.585)); +#176883 = DIRECTION('',(0.,0.,1.)); +#176884 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#176885 = ORIENTED_EDGE('',*,*,#176886,.T.); +#176886 = EDGE_CURVE('',#176878,#176887,#176889,.T.); +#176887 = VERTEX_POINT('',#176888); +#176888 = CARTESIAN_POINT('',(111.273128,-96.083647,1.585)); +#176889 = LINE('',#176890,#176891); +#176890 = CARTESIAN_POINT('',(111.229745,-95.910113,1.585)); +#176891 = VECTOR('',#176892,1.); +#176892 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#176893 = ORIENTED_EDGE('',*,*,#176894,.T.); +#176894 = EDGE_CURVE('',#176887,#176895,#176897,.T.); +#176895 = VERTEX_POINT('',#176896); +#176896 = CARTESIAN_POINT('',(111.311622,-96.160634,1.585)); +#176897 = LINE('',#176898,#176899); +#176898 = CARTESIAN_POINT('',(111.273128,-96.083647,1.585)); +#176899 = VECTOR('',#176900,1.); +#176900 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#176901 = ORIENTED_EDGE('',*,*,#176902,.T.); +#176902 = EDGE_CURVE('',#176895,#176903,#176905,.T.); +#176903 = VERTEX_POINT('',#176904); +#176904 = CARTESIAN_POINT('',(111.385735,-96.234748,1.585)); +#176905 = LINE('',#176906,#176907); +#176906 = CARTESIAN_POINT('',(111.311622,-96.160634,1.585)); +#176907 = VECTOR('',#176908,1.); +#176908 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#176909 = ORIENTED_EDGE('',*,*,#176910,.T.); +#176910 = EDGE_CURVE('',#176903,#176911,#176913,.T.); +#176911 = VERTEX_POINT('',#176912); +#176912 = CARTESIAN_POINT('',(111.685659,-96.234747,1.585)); +#176913 = CIRCLE('',#176914,0.299305962385); +#176914 = AXIS2_PLACEMENT_3D('',#176915,#176916,#176917); +#176915 = CARTESIAN_POINT('',(111.53569613635,-95.97571959093,1.585)); +#176916 = DIRECTION('',(0.,0.,1.)); +#176917 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#176918 = ORIENTED_EDGE('',*,*,#176919,.T.); +#176919 = EDGE_CURVE('',#176911,#176920,#176922,.T.); +#176920 = VERTEX_POINT('',#176921); +#176921 = CARTESIAN_POINT('',(111.732124,-96.19032,1.585)); +#176922 = LINE('',#176923,#176924); +#176923 = CARTESIAN_POINT('',(111.685659,-96.234747,1.585)); +#176924 = VECTOR('',#176925,1.); +#176925 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#176926 = ORIENTED_EDGE('',*,*,#176927,.T.); +#176927 = EDGE_CURVE('',#176920,#176928,#176930,.T.); +#176928 = VERTEX_POINT('',#176929); +#176929 = CARTESIAN_POINT('',(111.826825,-96.305713,1.585)); +#176930 = CIRCLE('',#176931,7.499993690112E-02); +#176931 = AXIS2_PLACEMENT_3D('',#176932,#176933,#176934); +#176932 = CARTESIAN_POINT('',(111.7737922483,-96.25267982374,1.585)); +#176933 = DIRECTION('',(0.,0.,-1.)); +#176934 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#176935 = ORIENTED_EDGE('',*,*,#176936,.T.); +#176936 = EDGE_CURVE('',#176928,#176937,#176939,.T.); +#176937 = VERTEX_POINT('',#176938); +#176938 = CARTESIAN_POINT('',(111.763315,-96.365457,1.585)); +#176939 = LINE('',#176940,#176941); +#176940 = CARTESIAN_POINT('',(111.826825,-96.305713,1.585)); +#176941 = VECTOR('',#176942,1.); +#176942 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#176943 = ORIENTED_EDGE('',*,*,#176944,.T.); +#176944 = EDGE_CURVE('',#176937,#176945,#176947,.T.); +#176945 = VERTEX_POINT('',#176946); +#176946 = CARTESIAN_POINT('',(111.303553,-96.362661,1.585)); +#176947 = CIRCLE('',#176948,0.461067828848); +#176948 = AXIS2_PLACEMENT_3D('',#176949,#176950,#176951); +#176949 = CARTESIAN_POINT('',(111.53586451268,-95.96439613352,1.585)); +#176950 = DIRECTION('',(-0.,0.,-1.)); +#176951 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#176952 = ORIENTED_EDGE('',*,*,#176953,.T.); +#176953 = EDGE_CURVE('',#176945,#176954,#176956,.T.); +#176954 = VERTEX_POINT('',#176955); +#176955 = CARTESIAN_POINT('',(111.186864,-96.244898,1.585)); +#176956 = LINE('',#176957,#176958); +#176957 = CARTESIAN_POINT('',(111.303553,-96.362661,1.585)); +#176958 = VECTOR('',#176959,1.); +#176959 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#176960 = ORIENTED_EDGE('',*,*,#176961,.T.); +#176961 = EDGE_CURVE('',#176954,#176962,#176964,.T.); +#176962 = VERTEX_POINT('',#176963); +#176963 = CARTESIAN_POINT('',(111.129603,-96.128013,1.585)); +#176964 = LINE('',#176965,#176966); +#176965 = CARTESIAN_POINT('',(111.186864,-96.244898,1.585)); +#176966 = VECTOR('',#176967,1.); +#176967 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#176968 = ORIENTED_EDGE('',*,*,#176969,.T.); +#176969 = EDGE_CURVE('',#176962,#176970,#176972,.T.); +#176970 = VERTEX_POINT('',#176971); +#176971 = CARTESIAN_POINT('',(111.079745,-95.919347,1.585)); +#176972 = LINE('',#176973,#176974); +#176973 = CARTESIAN_POINT('',(111.129603,-96.128013,1.585)); +#176974 = VECTOR('',#176975,1.); +#176975 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#176976 = ORIENTED_EDGE('',*,*,#176977,.T.); +#176977 = EDGE_CURVE('',#176970,#176978,#176980,.T.); +#176978 = VERTEX_POINT('',#176979); +#176979 = CARTESIAN_POINT('',(111.081984,-95.7583,1.585)); +#176980 = LINE('',#176981,#176982); +#176981 = CARTESIAN_POINT('',(111.079745,-95.919347,1.585)); +#176982 = VECTOR('',#176983,1.); +#176983 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#176984 = ORIENTED_EDGE('',*,*,#176985,.T.); +#176985 = EDGE_CURVE('',#176978,#176986,#176988,.T.); +#176986 = VERTEX_POINT('',#176987); +#176987 = CARTESIAN_POINT('',(111.135282,-95.552473,1.585)); +#176988 = LINE('',#176989,#176990); +#176989 = CARTESIAN_POINT('',(111.081984,-95.7583,1.585)); +#176990 = VECTOR('',#176991,1.); +#176991 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#176992 = ORIENTED_EDGE('',*,*,#176993,.T.); +#176993 = EDGE_CURVE('',#176986,#176994,#176996,.T.); +#176994 = VERTEX_POINT('',#176995); +#176995 = CARTESIAN_POINT('',(111.192231,-95.443492,1.585)); +#176996 = LINE('',#176997,#176998); +#176997 = CARTESIAN_POINT('',(111.135282,-95.552473,1.585)); +#176998 = VECTOR('',#176999,1.); +#176999 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#177000 = ORIENTED_EDGE('',*,*,#177001,.T.); +#177001 = EDGE_CURVE('',#176994,#176825,#177002,.T.); +#177002 = LINE('',#177003,#177004); +#177003 = CARTESIAN_POINT('',(111.192231,-95.443492,1.585)); +#177004 = VECTOR('',#177005,1.); +#177005 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#177006 = PLANE('',#177007); +#177007 = AXIS2_PLACEMENT_3D('',#177008,#177009,#177010); +#177008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177009 = DIRECTION('',(0.,0.,1.)); +#177010 = DIRECTION('',(1.,0.,-0.)); +#177011 = SHELL_BASED_SURFACE_MODEL('',(#177012)); +#177012 = OPEN_SHELL('',(#177013)); +#177013 = ADVANCED_FACE('',(#177014),#177200,.T.); +#177014 = FACE_BOUND('',#177015,.F.); +#177015 = EDGE_LOOP('',(#177016,#177027,#177035,#177044,#177052,#177060, + #177069,#177077,#177086,#177094,#177102,#177110,#177119,#177127, + #177136,#177144,#177153,#177161,#177169,#177177,#177186,#177194)); +#177016 = ORIENTED_EDGE('',*,*,#177017,.T.); +#177017 = EDGE_CURVE('',#177018,#177020,#177022,.T.); +#177018 = VERTEX_POINT('',#177019); +#177019 = CARTESIAN_POINT('',(112.092494,-95.421478,1.585)); +#177020 = VERTEX_POINT('',#177021); +#177021 = CARTESIAN_POINT('',(112.107126,-95.272919,1.585)); +#177022 = CIRCLE('',#177023,7.500006711463E-02); +#177023 = AXIS2_PLACEMENT_3D('',#177024,#177025,#177026); +#177024 = CARTESIAN_POINT('',(112.10712593288,-95.34791906711,1.585)); +#177025 = DIRECTION('',(0.,0.,-1.)); +#177026 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#177027 = ORIENTED_EDGE('',*,*,#177028,.T.); +#177028 = EDGE_CURVE('',#177020,#177029,#177031,.T.); +#177029 = VERTEX_POINT('',#177030); +#177030 = CARTESIAN_POINT('',(112.733911,-95.273681,1.585)); +#177031 = LINE('',#177032,#177033); +#177032 = CARTESIAN_POINT('',(112.107126,-95.272919,1.585)); +#177033 = VECTOR('',#177034,1.); +#177034 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#177035 = ORIENTED_EDGE('',*,*,#177036,.T.); +#177036 = EDGE_CURVE('',#177029,#177037,#177039,.T.); +#177037 = VERTEX_POINT('',#177038); +#177038 = CARTESIAN_POINT('',(112.799732,-95.362551,1.585)); +#177039 = CIRCLE('',#177040,7.447391611627E-02); +#177040 = AXIS2_PLACEMENT_3D('',#177041,#177042,#177043); +#177041 = CARTESIAN_POINT('',(112.72673192664,-95.3478080874,1.585)); +#177042 = DIRECTION('',(0.,0.,-1.)); +#177043 = DIRECTION('',(9.639715124831E-02,0.995342950561,0.)); +#177044 = ORIENTED_EDGE('',*,*,#177045,.T.); +#177045 = EDGE_CURVE('',#177037,#177046,#177048,.T.); +#177046 = VERTEX_POINT('',#177047); +#177047 = CARTESIAN_POINT('',(112.782616,-95.397307,1.585)); +#177048 = LINE('',#177049,#177050); +#177049 = CARTESIAN_POINT('',(112.799732,-95.362551,1.585)); +#177050 = VECTOR('',#177051,1.); +#177051 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#177052 = ORIENTED_EDGE('',*,*,#177053,.T.); +#177053 = EDGE_CURVE('',#177046,#177054,#177056,.T.); +#177054 = VERTEX_POINT('',#177055); +#177055 = CARTESIAN_POINT('',(112.55572,-95.656616,1.585)); +#177056 = LINE('',#177057,#177058); +#177057 = CARTESIAN_POINT('',(112.782616,-95.397307,1.585)); +#177058 = VECTOR('',#177059,1.); +#177059 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#177060 = ORIENTED_EDGE('',*,*,#177061,.T.); +#177061 = EDGE_CURVE('',#177054,#177062,#177064,.T.); +#177062 = VERTEX_POINT('',#177063); +#177063 = CARTESIAN_POINT('',(112.799732,-95.904715,1.585)); +#177064 = CIRCLE('',#177065,0.348520834816); +#177065 = AXIS2_PLACEMENT_3D('',#177066,#177067,#177068); +#177066 = CARTESIAN_POINT('',(112.4624266174,-95.99241819931,1.585)); +#177067 = DIRECTION('',(0.,0.,-1.)); +#177068 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#177069 = ORIENTED_EDGE('',*,*,#177070,.T.); +#177070 = EDGE_CURVE('',#177062,#177071,#177073,.T.); +#177071 = VERTEX_POINT('',#177072); +#177072 = CARTESIAN_POINT('',(112.79851,-96.177252,1.585)); +#177073 = LINE('',#177074,#177075); +#177074 = CARTESIAN_POINT('',(112.799732,-95.904715,1.585)); +#177075 = VECTOR('',#177076,1.); +#177076 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#177077 = ORIENTED_EDGE('',*,*,#177078,.T.); +#177078 = EDGE_CURVE('',#177071,#177079,#177081,.T.); +#177079 = VERTEX_POINT('',#177080); +#177080 = CARTESIAN_POINT('',(112.550329,-96.421478,1.585)); +#177081 = CIRCLE('',#177082,0.348635327447); +#177082 = AXIS2_PLACEMENT_3D('',#177083,#177084,#177085); +#177083 = CARTESIAN_POINT('',(112.46255748129,-96.08407208415,1.585)); +#177084 = DIRECTION('',(0.,0.,-1.)); +#177085 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#177086 = ORIENTED_EDGE('',*,*,#177087,.T.); +#177087 = EDGE_CURVE('',#177079,#177088,#177090,.T.); +#177088 = VERTEX_POINT('',#177089); +#177089 = CARTESIAN_POINT('',(112.230173,-96.420256,1.585)); +#177090 = LINE('',#177091,#177092); +#177091 = CARTESIAN_POINT('',(112.550329,-96.421478,1.585)); +#177092 = VECTOR('',#177093,1.); +#177093 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#177094 = ORIENTED_EDGE('',*,*,#177095,.T.); +#177095 = EDGE_CURVE('',#177088,#177096,#177098,.T.); +#177096 = VERTEX_POINT('',#177097); +#177097 = CARTESIAN_POINT('',(112.10746,-96.35805,1.585)); +#177098 = LINE('',#177099,#177100); +#177099 = CARTESIAN_POINT('',(112.230173,-96.420256,1.585)); +#177100 = VECTOR('',#177101,1.); +#177101 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#177102 = ORIENTED_EDGE('',*,*,#177103,.T.); +#177103 = EDGE_CURVE('',#177096,#177104,#177106,.T.); +#177104 = VERTEX_POINT('',#177105); +#177105 = CARTESIAN_POINT('',(112.044765,-96.294347,1.585)); +#177106 = LINE('',#177107,#177108); +#177107 = CARTESIAN_POINT('',(112.10746,-96.35805,1.585)); +#177108 = VECTOR('',#177109,1.); +#177109 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#177110 = ORIENTED_EDGE('',*,*,#177111,.T.); +#177111 = EDGE_CURVE('',#177104,#177112,#177114,.T.); +#177112 = VERTEX_POINT('',#177113); +#177113 = CARTESIAN_POINT('',(112.16016,-96.199648,1.585)); +#177114 = CIRCLE('',#177115,7.50001266804E-02); +#177115 = AXIS2_PLACEMENT_3D('',#177116,#177117,#177118); +#177116 = CARTESIAN_POINT('',(112.10712605199,-96.25268024831,1.585)); +#177117 = DIRECTION('',(0.,0.,-1.)); +#177118 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#177119 = ORIENTED_EDGE('',*,*,#177120,.T.); +#177120 = EDGE_CURVE('',#177112,#177121,#177123,.T.); +#177121 = VERTEX_POINT('',#177122); +#177122 = CARTESIAN_POINT('',(112.199172,-96.238661,1.585)); +#177123 = LINE('',#177124,#177125); +#177124 = CARTESIAN_POINT('',(112.16016,-96.199648,1.585)); +#177125 = VECTOR('',#177126,1.); +#177126 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#177127 = ORIENTED_EDGE('',*,*,#177128,.T.); +#177128 = EDGE_CURVE('',#177121,#177129,#177131,.T.); +#177129 = VERTEX_POINT('',#177130); +#177130 = CARTESIAN_POINT('',(112.586507,-96.238661,1.585)); +#177131 = CIRCLE('',#177132,0.358502380266); +#177132 = AXIS2_PLACEMENT_3D('',#177133,#177134,#177135); +#177133 = CARTESIAN_POINT('',(112.3928395,-95.936971,1.585)); +#177134 = DIRECTION('',(0.,0.,1.)); +#177135 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#177136 = ORIENTED_EDGE('',*,*,#177137,.T.); +#177137 = EDGE_CURVE('',#177129,#177138,#177140,.T.); +#177138 = VERTEX_POINT('',#177139); +#177139 = CARTESIAN_POINT('',(112.616914,-96.208253,1.585)); +#177140 = LINE('',#177141,#177142); +#177141 = CARTESIAN_POINT('',(112.586507,-96.238661,1.585)); +#177142 = VECTOR('',#177143,1.); +#177143 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#177144 = ORIENTED_EDGE('',*,*,#177145,.T.); +#177145 = EDGE_CURVE('',#177138,#177146,#177148,.T.); +#177146 = VERTEX_POINT('',#177147); +#177147 = CARTESIAN_POINT('',(112.616915,-95.868536,1.585)); +#177148 = CIRCLE('',#177149,0.305616146029); +#177149 = AXIS2_PLACEMENT_3D('',#177150,#177151,#177152); +#177150 = CARTESIAN_POINT('',(112.36284892049,-96.03839375212,1.585)); +#177151 = DIRECTION('',(0.,-0.,1.)); +#177152 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#177153 = ORIENTED_EDGE('',*,*,#177154,.T.); +#177154 = EDGE_CURVE('',#177146,#177155,#177157,.T.); +#177155 = VERTEX_POINT('',#177156); +#177156 = CARTESIAN_POINT('',(112.586508,-95.838129,1.585)); +#177157 = LINE('',#177158,#177159); +#177158 = CARTESIAN_POINT('',(112.616915,-95.868536,1.585)); +#177159 = VECTOR('',#177160,1.); +#177160 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#177161 = ORIENTED_EDGE('',*,*,#177162,.T.); +#177162 = EDGE_CURVE('',#177155,#177163,#177165,.T.); +#177163 = VERTEX_POINT('',#177164); +#177164 = CARTESIAN_POINT('',(112.517992,-95.803871,1.585)); +#177165 = LINE('',#177166,#177167); +#177166 = CARTESIAN_POINT('',(112.586508,-95.838129,1.585)); +#177167 = VECTOR('',#177168,1.); +#177168 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#177169 = ORIENTED_EDGE('',*,*,#177170,.T.); +#177170 = EDGE_CURVE('',#177163,#177171,#177173,.T.); +#177171 = VERTEX_POINT('',#177172); +#177172 = CARTESIAN_POINT('',(112.378208,-95.80243,1.585)); +#177173 = LINE('',#177174,#177175); +#177174 = CARTESIAN_POINT('',(112.517992,-95.803871,1.585)); +#177175 = VECTOR('',#177176,1.); +#177176 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#177177 = ORIENTED_EDGE('',*,*,#177178,.T.); +#177178 = EDGE_CURVE('',#177171,#177179,#177181,.T.); +#177179 = VERTEX_POINT('',#177180); +#177180 = CARTESIAN_POINT('',(112.336397,-95.679483,1.585)); +#177181 = CIRCLE('',#177182,7.500015628755E-02); +#177182 = AXIS2_PLACEMENT_3D('',#177183,#177184,#177185); +#177183 = CARTESIAN_POINT('',(112.39284028432,-95.7288710461,1.585)); +#177184 = DIRECTION('',(0.,0.,-1.)); +#177185 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#177186 = ORIENTED_EDGE('',*,*,#177187,.T.); +#177187 = EDGE_CURVE('',#177179,#177188,#177190,.T.); +#177188 = VERTEX_POINT('',#177189); +#177189 = CARTESIAN_POINT('',(112.560891,-95.422919,1.585)); +#177190 = LINE('',#177191,#177192); +#177191 = CARTESIAN_POINT('',(112.336397,-95.679483,1.585)); +#177192 = VECTOR('',#177193,1.); +#177193 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#177194 = ORIENTED_EDGE('',*,*,#177195,.T.); +#177195 = EDGE_CURVE('',#177188,#177018,#177196,.T.); +#177196 = LINE('',#177197,#177198); +#177197 = CARTESIAN_POINT('',(112.560891,-95.422919,1.585)); +#177198 = VECTOR('',#177199,1.); +#177199 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#177200 = PLANE('',#177201); +#177201 = AXIS2_PLACEMENT_3D('',#177202,#177203,#177204); +#177202 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177203 = DIRECTION('',(0.,0.,1.)); +#177204 = DIRECTION('',(1.,0.,-0.)); +#177205 = SHELL_BASED_SURFACE_MODEL('',(#177206)); +#177206 = OPEN_SHELL('',(#177207)); +#177207 = ADVANCED_FACE('',(#177208,#177261),#177287,.T.); +#177208 = FACE_BOUND('',#177209,.F.); +#177209 = EDGE_LOOP('',(#177210,#177221,#177229,#177238,#177246,#177255) + ); +#177210 = ORIENTED_EDGE('',*,*,#177211,.T.); +#177211 = EDGE_CURVE('',#177212,#177214,#177216,.T.); +#177212 = VERTEX_POINT('',#177213); +#177213 = CARTESIAN_POINT('',(140.149224,-95.980674,1.585)); +#177214 = VERTEX_POINT('',#177215); +#177215 = CARTESIAN_POINT('',(140.234076,-95.980674,1.585)); +#177216 = CIRCLE('',#177217,5.999686798802E-02); +#177217 = AXIS2_PLACEMENT_3D('',#177218,#177219,#177220); +#177218 = CARTESIAN_POINT('',(140.19165,-96.02309638433,1.585)); +#177219 = DIRECTION('',(0.,0.,-1.)); +#177220 = DIRECTION('',(-0.707136912688,0.707076648401,0.)); +#177221 = ORIENTED_EDGE('',*,*,#177222,.T.); +#177222 = EDGE_CURVE('',#177214,#177223,#177225,.T.); +#177223 = VERTEX_POINT('',#177224); +#177224 = CARTESIAN_POINT('',(140.534076,-96.280674,1.585)); +#177225 = LINE('',#177226,#177227); +#177226 = CARTESIAN_POINT('',(140.234076,-95.980674,1.585)); +#177227 = VECTOR('',#177228,1.); +#177228 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#177229 = ORIENTED_EDGE('',*,*,#177230,.T.); +#177230 = EDGE_CURVE('',#177223,#177231,#177233,.T.); +#177231 = VERTEX_POINT('',#177232); +#177232 = CARTESIAN_POINT('',(140.49165,-96.3831,1.585)); +#177233 = CIRCLE('',#177234,5.999940475497E-02); +#177234 = AXIS2_PLACEMENT_3D('',#177235,#177236,#177237); +#177235 = CARTESIAN_POINT('',(140.49165062331,-96.32310059524,1.585)); +#177236 = DIRECTION('',(0.,0.,-1.)); +#177237 = DIRECTION('',(0.707096626292,0.707116935935,0.)); +#177238 = ORIENTED_EDGE('',*,*,#177239,.T.); +#177239 = EDGE_CURVE('',#177231,#177240,#177242,.T.); +#177240 = VERTEX_POINT('',#177241); +#177241 = CARTESIAN_POINT('',(139.89165,-96.3831,1.585)); +#177242 = LINE('',#177243,#177244); +#177243 = CARTESIAN_POINT('',(140.49165,-96.3831,1.585)); +#177244 = VECTOR('',#177245,1.); +#177245 = DIRECTION('',(-1.,0.,0.)); +#177246 = ORIENTED_EDGE('',*,*,#177247,.T.); +#177247 = EDGE_CURVE('',#177240,#177248,#177250,.T.); +#177248 = VERTEX_POINT('',#177249); +#177249 = CARTESIAN_POINT('',(139.849224,-96.280674,1.585)); +#177250 = CIRCLE('',#177251,5.999940475496E-02); +#177251 = AXIS2_PLACEMENT_3D('',#177252,#177253,#177254); +#177252 = CARTESIAN_POINT('',(139.89164937668,-96.32310059524,1.585)); +#177253 = DIRECTION('',(0.,0.,-1.)); +#177254 = DIRECTION('',(1.038874045148E-05,-0.999999999946,0.)); +#177255 = ORIENTED_EDGE('',*,*,#177256,.T.); +#177256 = EDGE_CURVE('',#177248,#177212,#177257,.T.); +#177257 = LINE('',#177258,#177259); +#177258 = CARTESIAN_POINT('',(139.849224,-96.280674,1.585)); +#177259 = VECTOR('',#177260,1.); +#177260 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#177261 = FACE_BOUND('',#177262,.F.); +#177262 = EDGE_LOOP('',(#177263,#177273,#177281)); +#177263 = ORIENTED_EDGE('',*,*,#177264,.T.); +#177264 = EDGE_CURVE('',#177265,#177267,#177269,.T.); +#177265 = VERTEX_POINT('',#177266); +#177266 = CARTESIAN_POINT('',(140.036502,-96.2631,1.585)); +#177267 = VERTEX_POINT('',#177268); +#177268 = CARTESIAN_POINT('',(140.346798,-96.2631,1.585)); +#177269 = LINE('',#177270,#177271); +#177270 = CARTESIAN_POINT('',(140.036502,-96.2631,1.585)); +#177271 = VECTOR('',#177272,1.); +#177272 = DIRECTION('',(1.,0.,0.)); +#177273 = ORIENTED_EDGE('',*,*,#177274,.T.); +#177274 = EDGE_CURVE('',#177267,#177275,#177277,.T.); +#177275 = VERTEX_POINT('',#177276); +#177276 = CARTESIAN_POINT('',(140.19165,-96.107952,1.585)); +#177277 = LINE('',#177278,#177279); +#177278 = CARTESIAN_POINT('',(140.346798,-96.2631,1.585)); +#177279 = VECTOR('',#177280,1.); +#177280 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#177281 = ORIENTED_EDGE('',*,*,#177282,.T.); +#177282 = EDGE_CURVE('',#177275,#177265,#177283,.T.); +#177283 = LINE('',#177284,#177285); +#177284 = CARTESIAN_POINT('',(140.19165,-96.107952,1.585)); +#177285 = VECTOR('',#177286,1.); +#177286 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#177287 = PLANE('',#177288); +#177288 = AXIS2_PLACEMENT_3D('',#177289,#177290,#177291); +#177289 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177290 = DIRECTION('',(0.,0.,1.)); +#177291 = DIRECTION('',(1.,0.,-0.)); +#177292 = SHELL_BASED_SURFACE_MODEL('',(#177293)); +#177293 = OPEN_SHELL('',(#177294)); +#177294 = ADVANCED_FACE('',(#177295),#177355,.T.); +#177295 = FACE_BOUND('',#177296,.F.); +#177296 = EDGE_LOOP('',(#177297,#177308,#177316,#177324,#177332,#177340, + #177349)); +#177297 = ORIENTED_EDGE('',*,*,#177298,.T.); +#177298 = EDGE_CURVE('',#177299,#177301,#177303,.T.); +#177299 = VERTEX_POINT('',#177300); +#177300 = CARTESIAN_POINT('',(104.65165,-96.3331,1.585)); +#177301 = VERTEX_POINT('',#177302); +#177302 = CARTESIAN_POINT('',(104.603126,-96.23781,1.585)); +#177303 = CIRCLE('',#177304,6.000027696174E-02); +#177304 = AXIS2_PLACEMENT_3D('',#177305,#177306,#177307); +#177305 = CARTESIAN_POINT('',(104.65165092846,-96.27309972304,1.585)); +#177306 = DIRECTION('',(0.,0.,-1.)); +#177307 = DIRECTION('',(-1.547440135436E-05,-0.99999999988,-0.)); +#177308 = ORIENTED_EDGE('',*,*,#177309,.T.); +#177309 = EDGE_CURVE('',#177301,#177310,#177312,.T.); +#177310 = VERTEX_POINT('',#177311); +#177311 = CARTESIAN_POINT('',(104.843126,-95.90781,1.585)); +#177312 = LINE('',#177313,#177314); +#177313 = CARTESIAN_POINT('',(104.603126,-96.23781,1.585)); +#177314 = VECTOR('',#177315,1.); +#177315 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#177316 = ORIENTED_EDGE('',*,*,#177317,.T.); +#177317 = EDGE_CURVE('',#177310,#177318,#177320,.T.); +#177318 = VERTEX_POINT('',#177319); +#177319 = CARTESIAN_POINT('',(104.882292,-95.883834,1.585)); +#177320 = LINE('',#177321,#177322); +#177321 = CARTESIAN_POINT('',(104.843126,-95.90781,1.585)); +#177322 = VECTOR('',#177323,1.); +#177323 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#177324 = ORIENTED_EDGE('',*,*,#177325,.T.); +#177325 = EDGE_CURVE('',#177318,#177326,#177328,.T.); +#177326 = VERTEX_POINT('',#177327); +#177327 = CARTESIAN_POINT('',(104.92694,-95.894576,1.585)); +#177328 = LINE('',#177329,#177330); +#177329 = CARTESIAN_POINT('',(104.882292,-95.883834,1.585)); +#177330 = VECTOR('',#177331,1.); +#177331 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#177332 = ORIENTED_EDGE('',*,*,#177333,.T.); +#177333 = EDGE_CURVE('',#177326,#177334,#177336,.T.); +#177334 = VERTEX_POINT('',#177335); +#177335 = CARTESIAN_POINT('',(105.180174,-96.23781,1.585)); +#177336 = LINE('',#177337,#177338); +#177337 = CARTESIAN_POINT('',(104.92694,-95.894576,1.585)); +#177338 = VECTOR('',#177339,1.); +#177339 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#177340 = ORIENTED_EDGE('',*,*,#177341,.T.); +#177341 = EDGE_CURVE('',#177334,#177342,#177344,.T.); +#177342 = VERTEX_POINT('',#177343); +#177343 = CARTESIAN_POINT('',(105.13165,-96.3331,1.585)); +#177344 = CIRCLE('',#177345,5.999941814204E-02); +#177345 = AXIS2_PLACEMENT_3D('',#177346,#177347,#177348); +#177346 = CARTESIAN_POINT('',(105.13165075805,-96.27310058186,1.585)); +#177347 = DIRECTION('',(0.,0.,-1.)); +#177348 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#177349 = ORIENTED_EDGE('',*,*,#177350,.T.); +#177350 = EDGE_CURVE('',#177342,#177299,#177351,.T.); +#177351 = LINE('',#177352,#177353); +#177352 = CARTESIAN_POINT('',(105.13165,-96.3331,1.585)); +#177353 = VECTOR('',#177354,1.); +#177354 = DIRECTION('',(-1.,0.,0.)); +#177355 = PLANE('',#177356); +#177356 = AXIS2_PLACEMENT_3D('',#177357,#177358,#177359); +#177357 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177358 = DIRECTION('',(0.,0.,1.)); +#177359 = DIRECTION('',(1.,0.,-0.)); +#177360 = SHELL_BASED_SURFACE_MODEL('',(#177361)); +#177361 = OPEN_SHELL('',(#177362)); +#177362 = ADVANCED_FACE('',(#177363),#177399,.T.); +#177363 = FACE_BOUND('',#177364,.F.); +#177364 = EDGE_LOOP('',(#177365,#177376,#177384,#177393)); +#177365 = ORIENTED_EDGE('',*,*,#177366,.T.); +#177366 = EDGE_CURVE('',#177367,#177369,#177371,.T.); +#177367 = VERTEX_POINT('',#177368); +#177368 = CARTESIAN_POINT('',(134.629392,-95.9056,1.585)); +#177369 = VERTEX_POINT('',#177370); +#177370 = CARTESIAN_POINT('',(134.629392,-95.7856,1.585)); +#177371 = CIRCLE('',#177372,6.000000000043E-02); +#177372 = AXIS2_PLACEMENT_3D('',#177373,#177374,#177375); +#177373 = CARTESIAN_POINT('',(134.62939177441,-95.8456,1.585)); +#177374 = DIRECTION('',(0.,0.,-1.)); +#177375 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#177376 = ORIENTED_EDGE('',*,*,#177377,.T.); +#177377 = EDGE_CURVE('',#177369,#177378,#177380,.T.); +#177378 = VERTEX_POINT('',#177379); +#177379 = CARTESIAN_POINT('',(135.103908,-95.7856,1.585)); +#177380 = LINE('',#177381,#177382); +#177381 = CARTESIAN_POINT('',(134.629392,-95.7856,1.585)); +#177382 = VECTOR('',#177383,1.); +#177383 = DIRECTION('',(1.,0.,0.)); +#177384 = ORIENTED_EDGE('',*,*,#177385,.T.); +#177385 = EDGE_CURVE('',#177378,#177386,#177388,.T.); +#177386 = VERTEX_POINT('',#177387); +#177387 = CARTESIAN_POINT('',(135.103908,-95.9056,1.585)); +#177388 = CIRCLE('',#177389,6.000000000043E-02); +#177389 = AXIS2_PLACEMENT_3D('',#177390,#177391,#177392); +#177390 = CARTESIAN_POINT('',(135.10390822558,-95.8456,1.585)); +#177391 = DIRECTION('',(0.,0.,-1.)); +#177392 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#177393 = ORIENTED_EDGE('',*,*,#177394,.T.); +#177394 = EDGE_CURVE('',#177386,#177367,#177395,.T.); +#177395 = LINE('',#177396,#177397); +#177396 = CARTESIAN_POINT('',(135.103908,-95.9056,1.585)); +#177397 = VECTOR('',#177398,1.); +#177398 = DIRECTION('',(-1.,0.,0.)); +#177399 = PLANE('',#177400); +#177400 = AXIS2_PLACEMENT_3D('',#177401,#177402,#177403); +#177401 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177402 = DIRECTION('',(0.,0.,1.)); +#177403 = DIRECTION('',(1.,0.,-0.)); +#177404 = SHELL_BASED_SURFACE_MODEL('',(#177405)); +#177405 = OPEN_SHELL('',(#177406)); +#177406 = ADVANCED_FACE('',(#177407,#177541),#177619,.T.); +#177407 = FACE_BOUND('',#177408,.F.); +#177408 = EDGE_LOOP('',(#177409,#177419,#177427,#177435,#177443,#177452, + #177460,#177469,#177477,#177485,#177493,#177501,#177509,#177518, + #177526,#177535)); +#177409 = ORIENTED_EDGE('',*,*,#177410,.T.); +#177410 = EDGE_CURVE('',#177411,#177413,#177415,.T.); +#177411 = VERTEX_POINT('',#177412); +#177412 = CARTESIAN_POINT('',(139.968689,-93.767667,1.585)); +#177413 = VERTEX_POINT('',#177414); +#177414 = CARTESIAN_POINT('',(139.99165,-93.7631,1.585)); +#177415 = LINE('',#177416,#177417); +#177416 = CARTESIAN_POINT('',(139.968689,-93.767667,1.585)); +#177417 = VECTOR('',#177418,1.); +#177418 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#177419 = ORIENTED_EDGE('',*,*,#177420,.T.); +#177420 = EDGE_CURVE('',#177413,#177421,#177423,.T.); +#177421 = VERTEX_POINT('',#177422); +#177422 = CARTESIAN_POINT('',(142.79165,-93.7631,1.585)); +#177423 = LINE('',#177424,#177425); +#177424 = CARTESIAN_POINT('',(139.99165,-93.7631,1.585)); +#177425 = VECTOR('',#177426,1.); +#177426 = DIRECTION('',(1.,0.,0.)); +#177427 = ORIENTED_EDGE('',*,*,#177428,.T.); +#177428 = EDGE_CURVE('',#177421,#177429,#177431,.T.); +#177429 = VERTEX_POINT('',#177430); +#177430 = CARTESIAN_POINT('',(142.814611,-93.767667,1.585)); +#177431 = LINE('',#177432,#177433); +#177432 = CARTESIAN_POINT('',(142.79165,-93.7631,1.585)); +#177433 = VECTOR('',#177434,1.); +#177434 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#177435 = ORIENTED_EDGE('',*,*,#177436,.T.); +#177436 = EDGE_CURVE('',#177429,#177437,#177439,.T.); +#177437 = VERTEX_POINT('',#177438); +#177438 = CARTESIAN_POINT('',(142.889919,-93.777703,1.585)); +#177439 = LINE('',#177440,#177441); +#177440 = CARTESIAN_POINT('',(142.814611,-93.767667,1.585)); +#177441 = VECTOR('',#177442,1.); +#177442 = DIRECTION('',(0.991236635155,-0.132098195018,0.)); +#177443 = ORIENTED_EDGE('',*,*,#177444,.T.); +#177444 = EDGE_CURVE('',#177437,#177445,#177447,.T.); +#177445 = VERTEX_POINT('',#177446); +#177446 = CARTESIAN_POINT('',(143.50165,-94.5231,1.585)); +#177447 = CIRCLE('',#177448,0.760001389949); +#177448 = AXIS2_PLACEMENT_3D('',#177449,#177450,#177451); +#177449 = CARTESIAN_POINT('',(142.74164861005,-94.52310088314,1.585)); +#177450 = DIRECTION('',(0.,0.,-1.)); +#177451 = DIRECTION('',(0.195092261553,0.980784894603,0.)); +#177452 = ORIENTED_EDGE('',*,*,#177453,.T.); +#177453 = EDGE_CURVE('',#177445,#177454,#177456,.T.); +#177454 = VERTEX_POINT('',#177455); +#177455 = CARTESIAN_POINT('',(143.50165,-95.1231,1.585)); +#177456 = LINE('',#177457,#177458); +#177457 = CARTESIAN_POINT('',(143.50165,-94.5231,1.585)); +#177458 = VECTOR('',#177459,1.); +#177459 = DIRECTION('',(0.,-1.,0.)); +#177460 = ORIENTED_EDGE('',*,*,#177461,.T.); +#177461 = EDGE_CURVE('',#177454,#177462,#177464,.T.); +#177462 = VERTEX_POINT('',#177463); +#177463 = CARTESIAN_POINT('',(142.889919,-95.868497,1.585)); +#177464 = CIRCLE('',#177465,0.759999019977); +#177465 = AXIS2_PLACEMENT_3D('',#177466,#177467,#177468); +#177466 = CARTESIAN_POINT('',(142.74165098002,-95.12310106184,1.585)); +#177467 = DIRECTION('',(0.,0.,-1.)); +#177468 = DIRECTION('',(0.999999999999,1.397165543076E-06,0.)); +#177469 = ORIENTED_EDGE('',*,*,#177470,.T.); +#177470 = EDGE_CURVE('',#177462,#177471,#177473,.T.); +#177471 = VERTEX_POINT('',#177472); +#177472 = CARTESIAN_POINT('',(142.814611,-95.878533,1.585)); +#177473 = LINE('',#177474,#177475); +#177474 = CARTESIAN_POINT('',(142.889919,-95.868497,1.585)); +#177475 = VECTOR('',#177476,1.); +#177476 = DIRECTION('',(-0.991236635155,-0.132098195018,0.)); +#177477 = ORIENTED_EDGE('',*,*,#177478,.T.); +#177478 = EDGE_CURVE('',#177471,#177479,#177481,.T.); +#177479 = VERTEX_POINT('',#177480); +#177480 = CARTESIAN_POINT('',(142.79165,-95.8831,1.585)); +#177481 = LINE('',#177482,#177483); +#177482 = CARTESIAN_POINT('',(142.814611,-95.878533,1.585)); +#177483 = VECTOR('',#177484,1.); +#177484 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#177485 = ORIENTED_EDGE('',*,*,#177486,.T.); +#177486 = EDGE_CURVE('',#177479,#177487,#177489,.T.); +#177487 = VERTEX_POINT('',#177488); +#177488 = CARTESIAN_POINT('',(139.99165,-95.8831,1.585)); +#177489 = LINE('',#177490,#177491); +#177490 = CARTESIAN_POINT('',(142.79165,-95.8831,1.585)); +#177491 = VECTOR('',#177492,1.); +#177492 = DIRECTION('',(-1.,0.,0.)); +#177493 = ORIENTED_EDGE('',*,*,#177494,.T.); +#177494 = EDGE_CURVE('',#177487,#177495,#177497,.T.); +#177495 = VERTEX_POINT('',#177496); +#177496 = CARTESIAN_POINT('',(139.965783,-95.875627,1.585)); +#177497 = LINE('',#177498,#177499); +#177498 = CARTESIAN_POINT('',(139.99165,-95.8831,1.585)); +#177499 = VECTOR('',#177500,1.); +#177500 = DIRECTION('',(-0.960711101854,0.277550317554,0.)); +#177501 = ORIENTED_EDGE('',*,*,#177502,.T.); +#177502 = EDGE_CURVE('',#177495,#177503,#177505,.T.); +#177503 = VERTEX_POINT('',#177504); +#177504 = CARTESIAN_POINT('',(139.893381,-95.868497,1.585)); +#177505 = LINE('',#177506,#177507); +#177506 = CARTESIAN_POINT('',(139.965783,-95.875627,1.585)); +#177507 = VECTOR('',#177508,1.); +#177508 = DIRECTION('',(-0.995186033295,9.800387306128E-02,0.)); +#177509 = ORIENTED_EDGE('',*,*,#177510,.T.); +#177510 = EDGE_CURVE('',#177503,#177511,#177513,.T.); +#177511 = VERTEX_POINT('',#177512); +#177512 = CARTESIAN_POINT('',(139.28165,-95.1231,1.585)); +#177513 = CIRCLE('',#177514,0.760001389949); +#177514 = AXIS2_PLACEMENT_3D('',#177515,#177516,#177517); +#177515 = CARTESIAN_POINT('',(140.04165138994,-95.12309911686,1.585)); +#177516 = DIRECTION('',(0.,0.,-1.)); +#177517 = DIRECTION('',(-0.195092261553,-0.980784894603,-0.)); +#177518 = ORIENTED_EDGE('',*,*,#177519,.T.); +#177519 = EDGE_CURVE('',#177511,#177520,#177522,.T.); +#177520 = VERTEX_POINT('',#177521); +#177521 = CARTESIAN_POINT('',(139.28165,-94.5231,1.585)); +#177522 = LINE('',#177523,#177524); +#177523 = CARTESIAN_POINT('',(139.28165,-95.1231,1.585)); +#177524 = VECTOR('',#177525,1.); +#177525 = DIRECTION('',(0.,1.,0.)); +#177526 = ORIENTED_EDGE('',*,*,#177527,.T.); +#177527 = EDGE_CURVE('',#177520,#177528,#177530,.T.); +#177528 = VERTEX_POINT('',#177529); +#177529 = CARTESIAN_POINT('',(139.893381,-93.777703,1.585)); +#177530 = CIRCLE('',#177531,0.759999019977); +#177531 = AXIS2_PLACEMENT_3D('',#177532,#177533,#177534); +#177532 = CARTESIAN_POINT('',(140.04164901997,-94.52309893815,1.585)); +#177533 = DIRECTION('',(0.,0.,-1.)); +#177534 = DIRECTION('',(-0.999999999999,-1.397165636569E-06,-0.)); +#177535 = ORIENTED_EDGE('',*,*,#177536,.T.); +#177536 = EDGE_CURVE('',#177528,#177411,#177537,.T.); +#177537 = LINE('',#177538,#177539); +#177538 = CARTESIAN_POINT('',(139.893381,-93.777703,1.585)); +#177539 = VECTOR('',#177540,1.); +#177540 = DIRECTION('',(0.991236635155,0.132098195018,0.)); +#177541 = FACE_BOUND('',#177542,.F.); +#177542 = EDGE_LOOP('',(#177543,#177554,#177562,#177570,#177579,#177587, + #177596,#177604,#177613)); +#177543 = ORIENTED_EDGE('',*,*,#177544,.T.); +#177544 = EDGE_CURVE('',#177545,#177547,#177549,.T.); +#177545 = VERTEX_POINT('',#177546); +#177546 = CARTESIAN_POINT('',(143.38165,-94.450989,1.585)); +#177547 = VERTEX_POINT('',#177548); +#177548 = CARTESIAN_POINT('',(142.813761,-93.8831,1.585)); +#177549 = CIRCLE('',#177550,0.64404917508); +#177550 = AXIS2_PLACEMENT_3D('',#177551,#177552,#177553); +#177551 = CARTESIAN_POINT('',(142.74165046088,-94.52309953911,1.585)); +#177552 = DIRECTION('',(0.,0.,1.)); +#177553 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#177554 = ORIENTED_EDGE('',*,*,#177555,.T.); +#177555 = EDGE_CURVE('',#177547,#177556,#177558,.T.); +#177556 = VERTEX_POINT('',#177557); +#177557 = CARTESIAN_POINT('',(140.04165,-93.8831,1.585)); +#177558 = LINE('',#177559,#177560); +#177559 = CARTESIAN_POINT('',(142.813761,-93.8831,1.585)); +#177560 = VECTOR('',#177561,1.); +#177561 = DIRECTION('',(-1.,0.,0.)); +#177562 = ORIENTED_EDGE('',*,*,#177563,.T.); +#177563 = EDGE_CURVE('',#177556,#177564,#177566,.T.); +#177564 = VERTEX_POINT('',#177565); +#177565 = CARTESIAN_POINT('',(139.969539,-93.8831,1.585)); +#177566 = LINE('',#177567,#177568); +#177567 = CARTESIAN_POINT('',(140.04165,-93.8831,1.585)); +#177568 = VECTOR('',#177569,1.); +#177569 = DIRECTION('',(-1.,0.,0.)); +#177570 = ORIENTED_EDGE('',*,*,#177571,.T.); +#177571 = EDGE_CURVE('',#177564,#177572,#177574,.T.); +#177572 = VERTEX_POINT('',#177573); +#177573 = CARTESIAN_POINT('',(139.40165,-94.450989,1.585)); +#177574 = CIRCLE('',#177575,0.64404917508); +#177575 = AXIS2_PLACEMENT_3D('',#177576,#177577,#177578); +#177576 = CARTESIAN_POINT('',(140.04164953911,-94.52309953911,1.585)); +#177577 = DIRECTION('',(0.,0.,1.)); +#177578 = DIRECTION('',(-0.111964337363,0.993712225526,0.)); +#177579 = ORIENTED_EDGE('',*,*,#177580,.T.); +#177580 = EDGE_CURVE('',#177572,#177581,#177583,.T.); +#177581 = VERTEX_POINT('',#177582); +#177582 = CARTESIAN_POINT('',(139.40165,-95.195211,1.585)); +#177583 = LINE('',#177584,#177585); +#177584 = CARTESIAN_POINT('',(139.40165,-94.450989,1.585)); +#177585 = VECTOR('',#177586,1.); +#177586 = DIRECTION('',(0.,-1.,0.)); +#177587 = ORIENTED_EDGE('',*,*,#177588,.T.); +#177588 = EDGE_CURVE('',#177581,#177589,#177591,.T.); +#177589 = VERTEX_POINT('',#177590); +#177590 = CARTESIAN_POINT('',(139.969539,-95.7631,1.585)); +#177591 = CIRCLE('',#177592,0.64404917508); +#177592 = AXIS2_PLACEMENT_3D('',#177593,#177594,#177595); +#177593 = CARTESIAN_POINT('',(140.04164953911,-95.12310046088,1.585)); +#177594 = DIRECTION('',(0.,0.,1.)); +#177595 = DIRECTION('',(-0.993712225526,-0.111964337363,0.)); +#177596 = ORIENTED_EDGE('',*,*,#177597,.T.); +#177597 = EDGE_CURVE('',#177589,#177598,#177600,.T.); +#177598 = VERTEX_POINT('',#177599); +#177599 = CARTESIAN_POINT('',(142.813761,-95.7631,1.585)); +#177600 = LINE('',#177601,#177602); +#177601 = CARTESIAN_POINT('',(139.969539,-95.7631,1.585)); +#177602 = VECTOR('',#177603,1.); +#177603 = DIRECTION('',(1.,0.,0.)); +#177604 = ORIENTED_EDGE('',*,*,#177605,.T.); +#177605 = EDGE_CURVE('',#177598,#177606,#177608,.T.); +#177606 = VERTEX_POINT('',#177607); +#177607 = CARTESIAN_POINT('',(143.38165,-95.195211,1.585)); +#177608 = CIRCLE('',#177609,0.64404917508); +#177609 = AXIS2_PLACEMENT_3D('',#177610,#177611,#177612); +#177610 = CARTESIAN_POINT('',(142.74165046088,-95.12310046088,1.585)); +#177611 = DIRECTION('',(0.,0.,1.)); +#177612 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#177613 = ORIENTED_EDGE('',*,*,#177614,.T.); +#177614 = EDGE_CURVE('',#177606,#177545,#177615,.T.); +#177615 = LINE('',#177616,#177617); +#177616 = CARTESIAN_POINT('',(143.38165,-95.195211,1.585)); +#177617 = VECTOR('',#177618,1.); +#177618 = DIRECTION('',(0.,1.,0.)); +#177619 = PLANE('',#177620); +#177620 = AXIS2_PLACEMENT_3D('',#177621,#177622,#177623); +#177621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177622 = DIRECTION('',(0.,0.,1.)); +#177623 = DIRECTION('',(1.,0.,-0.)); +#177624 = SHELL_BASED_SURFACE_MODEL('',(#177625)); +#177625 = OPEN_SHELL('',(#177626)); +#177626 = ADVANCED_FACE('',(#177627),#177713,.T.); +#177627 = FACE_BOUND('',#177628,.F.); +#177628 = EDGE_LOOP('',(#177629,#177640,#177648,#177657,#177665,#177674, + #177682,#177690,#177698,#177707)); +#177629 = ORIENTED_EDGE('',*,*,#177630,.T.); +#177630 = EDGE_CURVE('',#177631,#177633,#177635,.T.); +#177631 = VERTEX_POINT('',#177632); +#177632 = CARTESIAN_POINT('',(105.37165,-94.7631,1.585)); +#177633 = VERTEX_POINT('',#177634); +#177634 = CARTESIAN_POINT('',(105.43165,-94.7031,1.585)); +#177635 = CIRCLE('',#177636,5.999932016258E-02); +#177636 = AXIS2_PLACEMENT_3D('',#177637,#177638,#177639); +#177637 = CARTESIAN_POINT('',(105.43164932015,-94.76309932015,1.585)); +#177638 = DIRECTION('',(0.,0.,-1.)); +#177639 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#177640 = ORIENTED_EDGE('',*,*,#177641,.T.); +#177641 = EDGE_CURVE('',#177633,#177642,#177644,.T.); +#177642 = VERTEX_POINT('',#177643); +#177643 = CARTESIAN_POINT('',(106.95165,-94.7031,1.585)); +#177644 = LINE('',#177645,#177646); +#177645 = CARTESIAN_POINT('',(105.43165,-94.7031,1.585)); +#177646 = VECTOR('',#177647,1.); +#177647 = DIRECTION('',(1.,0.,0.)); +#177648 = ORIENTED_EDGE('',*,*,#177649,.T.); +#177649 = EDGE_CURVE('',#177642,#177650,#177652,.T.); +#177650 = VERTEX_POINT('',#177651); +#177651 = CARTESIAN_POINT('',(107.01165,-94.7631,1.585)); +#177652 = CIRCLE('',#177653,5.999932016258E-02); +#177653 = AXIS2_PLACEMENT_3D('',#177654,#177655,#177656); +#177654 = CARTESIAN_POINT('',(106.95165067984,-94.76309932015,1.585)); +#177655 = DIRECTION('',(0.,0.,-1.)); +#177656 = DIRECTION('',(-1.133081635828E-05,0.999999999936,0.)); +#177657 = ORIENTED_EDGE('',*,*,#177658,.T.); +#177658 = EDGE_CURVE('',#177650,#177659,#177661,.T.); +#177659 = VERTEX_POINT('',#177660); +#177660 = CARTESIAN_POINT('',(107.01165,-95.7631,1.585)); +#177661 = LINE('',#177662,#177663); +#177662 = CARTESIAN_POINT('',(107.01165,-94.7631,1.585)); +#177663 = VECTOR('',#177664,1.); +#177664 = DIRECTION('',(0.,-1.,0.)); +#177665 = ORIENTED_EDGE('',*,*,#177666,.T.); +#177666 = EDGE_CURVE('',#177659,#177667,#177669,.T.); +#177667 = VERTEX_POINT('',#177668); +#177668 = CARTESIAN_POINT('',(106.89165,-95.7631,1.585)); +#177669 = CIRCLE('',#177670,6.000000000042E-02); +#177670 = AXIS2_PLACEMENT_3D('',#177671,#177672,#177673); +#177671 = CARTESIAN_POINT('',(106.95165,-95.76310022558,1.585)); +#177672 = DIRECTION('',(0.,0.,-1.)); +#177673 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#177674 = ORIENTED_EDGE('',*,*,#177675,.T.); +#177675 = EDGE_CURVE('',#177667,#177676,#177678,.T.); +#177676 = VERTEX_POINT('',#177677); +#177677 = CARTESIAN_POINT('',(106.89165,-94.8231,1.585)); +#177678 = LINE('',#177679,#177680); +#177679 = CARTESIAN_POINT('',(106.89165,-95.7631,1.585)); +#177680 = VECTOR('',#177681,1.); +#177681 = DIRECTION('',(0.,1.,0.)); +#177682 = ORIENTED_EDGE('',*,*,#177683,.T.); +#177683 = EDGE_CURVE('',#177676,#177684,#177686,.T.); +#177684 = VERTEX_POINT('',#177685); +#177685 = CARTESIAN_POINT('',(105.489661,-94.8231,1.585)); +#177686 = LINE('',#177687,#177688); +#177687 = CARTESIAN_POINT('',(106.89165,-94.8231,1.585)); +#177688 = VECTOR('',#177689,1.); +#177689 = DIRECTION('',(-1.,0.,0.)); +#177690 = ORIENTED_EDGE('',*,*,#177691,.T.); +#177691 = EDGE_CURVE('',#177684,#177692,#177694,.T.); +#177692 = VERTEX_POINT('',#177693); +#177693 = CARTESIAN_POINT('',(105.487083,-94.836061,1.585)); +#177694 = LINE('',#177695,#177696); +#177695 = CARTESIAN_POINT('',(105.489661,-94.8231,1.585)); +#177696 = VECTOR('',#177697,1.); +#177697 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#177698 = ORIENTED_EDGE('',*,*,#177699,.T.); +#177699 = EDGE_CURVE('',#177692,#177700,#177702,.T.); +#177700 = VERTEX_POINT('',#177701); +#177701 = CARTESIAN_POINT('',(105.37165,-94.8131,1.585)); +#177702 = CIRCLE('',#177703,6.000007318647E-02); +#177703 = AXIS2_PLACEMENT_3D('',#177704,#177705,#177706); +#177704 = CARTESIAN_POINT('',(105.43165007318,-94.81310017668,1.585)); +#177705 = DIRECTION('',(-0.,0.,-1.)); +#177706 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#177707 = ORIENTED_EDGE('',*,*,#177708,.T.); +#177708 = EDGE_CURVE('',#177700,#177631,#177709,.T.); +#177709 = LINE('',#177710,#177711); +#177710 = CARTESIAN_POINT('',(105.37165,-94.8131,1.585)); +#177711 = VECTOR('',#177712,1.); +#177712 = DIRECTION('',(0.,1.,0.)); +#177713 = PLANE('',#177714); +#177714 = AXIS2_PLACEMENT_3D('',#177715,#177716,#177717); +#177715 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177716 = DIRECTION('',(0.,0.,1.)); +#177717 = DIRECTION('',(1.,0.,-0.)); +#177718 = SHELL_BASED_SURFACE_MODEL('',(#177719)); +#177719 = OPEN_SHELL('',(#177720)); +#177720 = ADVANCED_FACE('',(#177721,#177823),#177925,.T.); +#177721 = FACE_BOUND('',#177722,.F.); +#177722 = EDGE_LOOP('',(#177723,#177733,#177742,#177750,#177758,#177767, + #177775,#177783,#177792,#177800,#177808,#177817)); +#177723 = ORIENTED_EDGE('',*,*,#177724,.T.); +#177724 = EDGE_CURVE('',#177725,#177727,#177729,.T.); +#177725 = VERTEX_POINT('',#177726); +#177726 = CARTESIAN_POINT('',(180.881866,-95.093315,1.585)); +#177727 = VERTEX_POINT('',#177728); +#177728 = CARTESIAN_POINT('',(180.998755,-95.036053,1.585)); +#177729 = LINE('',#177730,#177731); +#177730 = CARTESIAN_POINT('',(180.881866,-95.093315,1.585)); +#177731 = VECTOR('',#177732,1.); +#177732 = DIRECTION('',(0.898031613354,0.439930928007,0.)); +#177733 = ORIENTED_EDGE('',*,*,#177734,.T.); +#177734 = EDGE_CURVE('',#177727,#177735,#177737,.T.); +#177735 = VERTEX_POINT('',#177736); +#177736 = CARTESIAN_POINT('',(181.669533,-95.041732,1.585)); +#177737 = CIRCLE('',#177738,0.965975843555); +#177738 = AXIS2_PLACEMENT_3D('',#177739,#177740,#177741); +#177739 = CARTESIAN_POINT('',(181.32647484794,-95.94473833145,1.585)); +#177740 = DIRECTION('',(0.,0.,-1.)); +#177741 = DIRECTION('',(-0.339262984817,0.940691568546,0.)); +#177742 = ORIENTED_EDGE('',*,*,#177743,.T.); +#177743 = EDGE_CURVE('',#177735,#177744,#177746,.T.); +#177744 = VERTEX_POINT('',#177745); +#177745 = CARTESIAN_POINT('',(181.778513,-95.098681,1.585)); +#177746 = LINE('',#177747,#177748); +#177747 = CARTESIAN_POINT('',(181.669533,-95.041732,1.585)); +#177748 = VECTOR('',#177749,1.); +#177749 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#177750 = ORIENTED_EDGE('',*,*,#177751,.T.); +#177751 = EDGE_CURVE('',#177744,#177752,#177754,.T.); +#177752 = VERTEX_POINT('',#177753); +#177753 = CARTESIAN_POINT('',(181.841967,-95.164211,1.585)); +#177754 = LINE('',#177755,#177756); +#177755 = CARTESIAN_POINT('',(181.778513,-95.098681,1.585)); +#177756 = VECTOR('',#177757,1.); +#177757 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#177758 = ORIENTED_EDGE('',*,*,#177759,.T.); +#177759 = EDGE_CURVE('',#177752,#177760,#177762,.T.); +#177760 = VERTEX_POINT('',#177761); +#177761 = CARTESIAN_POINT('',(181.8366,-95.53705,1.585)); +#177762 = CIRCLE('',#177763,0.290999070188); +#177763 = AXIS2_PLACEMENT_3D('',#177764,#177765,#177766); +#177764 = CARTESIAN_POINT('',(181.61587650487,-95.34741456673,1.585)); +#177765 = DIRECTION('',(0.,0.,-1.)); +#177766 = DIRECTION('',(0.776945764738,0.629567533038,0.)); +#177767 = ORIENTED_EDGE('',*,*,#177768,.T.); +#177768 = EDGE_CURVE('',#177760,#177769,#177771,.T.); +#177769 = VERTEX_POINT('',#177770); +#177770 = CARTESIAN_POINT('',(181.771067,-95.600503,1.585)); +#177771 = LINE('',#177772,#177773); +#177772 = CARTESIAN_POINT('',(181.8366,-95.53705,1.585)); +#177773 = VECTOR('',#177774,1.); +#177774 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#177775 = ORIENTED_EDGE('',*,*,#177776,.T.); +#177776 = EDGE_CURVE('',#177769,#177777,#177779,.T.); +#177777 = VERTEX_POINT('',#177778); +#177778 = CARTESIAN_POINT('',(181.654182,-95.657765,1.585)); +#177779 = LINE('',#177780,#177781); +#177780 = CARTESIAN_POINT('',(181.771067,-95.600503,1.585)); +#177781 = VECTOR('',#177782,1.); +#177782 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#177783 = ORIENTED_EDGE('',*,*,#177784,.T.); +#177784 = EDGE_CURVE('',#177777,#177785,#177787,.T.); +#177785 = VERTEX_POINT('',#177786); +#177786 = CARTESIAN_POINT('',(180.983404,-95.652086,1.585)); +#177787 = CIRCLE('',#177788,0.967158496826); +#177788 = AXIS2_PLACEMENT_3D('',#177789,#177790,#177791); +#177789 = CARTESIAN_POINT('',(181.32647282772,-94.74781870686,1.585)); +#177790 = DIRECTION('',(-0.,0.,-1.)); +#177791 = DIRECTION('',(0.338837091703,-0.940845059128,-0.)); +#177792 = ORIENTED_EDGE('',*,*,#177793,.T.); +#177793 = EDGE_CURVE('',#177785,#177794,#177796,.T.); +#177794 = VERTEX_POINT('',#177795); +#177795 = CARTESIAN_POINT('',(180.874423,-95.595136,1.585)); +#177796 = LINE('',#177797,#177798); +#177797 = CARTESIAN_POINT('',(180.983404,-95.652086,1.585)); +#177798 = VECTOR('',#177799,1.); +#177799 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#177800 = ORIENTED_EDGE('',*,*,#177801,.T.); +#177801 = EDGE_CURVE('',#177794,#177802,#177804,.T.); +#177802 = VERTEX_POINT('',#177803); +#177803 = CARTESIAN_POINT('',(180.81097,-95.529606,1.585)); +#177804 = LINE('',#177805,#177806); +#177805 = CARTESIAN_POINT('',(180.874423,-95.595136,1.585)); +#177806 = VECTOR('',#177807,1.); +#177807 = DIRECTION('',(-0.695630129574,0.718400113327,0.)); +#177808 = ORIENTED_EDGE('',*,*,#177809,.T.); +#177809 = EDGE_CURVE('',#177802,#177810,#177812,.T.); +#177810 = VERTEX_POINT('',#177811); +#177811 = CARTESIAN_POINT('',(180.816336,-95.156768,1.585)); +#177812 = CIRCLE('',#177813,0.291002094877); +#177813 = AXIS2_PLACEMENT_3D('',#177814,#177815,#177816); +#177814 = CARTESIAN_POINT('',(181.03706436573,-95.34640240558,1.585)); +#177815 = DIRECTION('',(0.,0.,-1.)); +#177816 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#177817 = ORIENTED_EDGE('',*,*,#177818,.T.); +#177818 = EDGE_CURVE('',#177810,#177725,#177819,.T.); +#177819 = LINE('',#177820,#177821); +#177820 = CARTESIAN_POINT('',(180.816336,-95.156768,1.585)); +#177821 = VECTOR('',#177822,1.); +#177822 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#177823 = FACE_BOUND('',#177824,.F.); +#177824 = EDGE_LOOP('',(#177825,#177836,#177844,#177852,#177861,#177869, + #177877,#177886,#177894,#177902,#177911,#177919)); +#177825 = ORIENTED_EDGE('',*,*,#177826,.T.); +#177826 = EDGE_CURVE('',#177827,#177829,#177831,.T.); +#177827 = VERTEX_POINT('',#177828); +#177828 = CARTESIAN_POINT('',(181.609816,-95.179578,1.585)); +#177829 = VERTEX_POINT('',#177830); +#177830 = CARTESIAN_POINT('',(181.043121,-95.179578,1.585)); +#177831 = CIRCLE('',#177832,0.815450468383); +#177832 = AXIS2_PLACEMENT_3D('',#177833,#177834,#177835); +#177833 = CARTESIAN_POINT('',(181.3264685,-95.94421756255,1.585)); +#177834 = DIRECTION('',(0.,0.,1.)); +#177835 = DIRECTION('',(0.347473587895,0.937689770508,-0.)); +#177836 = ORIENTED_EDGE('',*,*,#177837,.T.); +#177837 = EDGE_CURVE('',#177829,#177838,#177840,.T.); +#177838 = VERTEX_POINT('',#177839); +#177839 = CARTESIAN_POINT('',(180.966134,-95.218072,1.585)); +#177840 = LINE('',#177841,#177842); +#177841 = CARTESIAN_POINT('',(181.043121,-95.179578,1.585)); +#177842 = VECTOR('',#177843,1.); +#177843 = DIRECTION('',(-0.894424867414,-0.447218242641,0.)); +#177844 = ORIENTED_EDGE('',*,*,#177845,.T.); +#177845 = EDGE_CURVE('',#177838,#177846,#177848,.T.); +#177846 = VERTEX_POINT('',#177847); +#177847 = CARTESIAN_POINT('',(180.935727,-95.248479,1.585)); +#177848 = LINE('',#177849,#177850); +#177849 = CARTESIAN_POINT('',(180.966134,-95.218072,1.585)); +#177850 = VECTOR('',#177851,1.); +#177851 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#177852 = ORIENTED_EDGE('',*,*,#177853,.T.); +#177853 = EDGE_CURVE('',#177846,#177854,#177856,.T.); +#177854 = VERTEX_POINT('',#177855); +#177855 = CARTESIAN_POINT('',(180.935727,-95.445339,1.585)); +#177856 = CIRCLE('',#177857,0.148516804184); +#177857 = AXIS2_PLACEMENT_3D('',#177858,#177859,#177860); +#177858 = CARTESIAN_POINT('',(181.046942,-95.346909,1.585)); +#177859 = DIRECTION('',(0.,0.,1.)); +#177860 = DIRECTION('',(-0.748837820818,0.662753286006,0.)); +#177861 = ORIENTED_EDGE('',*,*,#177862,.T.); +#177862 = EDGE_CURVE('',#177854,#177863,#177865,.T.); +#177863 = VERTEX_POINT('',#177864); +#177864 = CARTESIAN_POINT('',(180.966134,-95.475746,1.585)); +#177865 = LINE('',#177866,#177867); +#177866 = CARTESIAN_POINT('',(180.935727,-95.445339,1.585)); +#177867 = VECTOR('',#177868,1.); +#177868 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#177869 = ORIENTED_EDGE('',*,*,#177870,.T.); +#177870 = EDGE_CURVE('',#177863,#177871,#177873,.T.); +#177871 = VERTEX_POINT('',#177872); +#177872 = CARTESIAN_POINT('',(181.043121,-95.514239,1.585)); +#177873 = LINE('',#177874,#177875); +#177874 = CARTESIAN_POINT('',(180.966134,-95.475746,1.585)); +#177875 = VECTOR('',#177876,1.); +#177876 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#177877 = ORIENTED_EDGE('',*,*,#177878,.T.); +#177878 = EDGE_CURVE('',#177871,#177879,#177881,.T.); +#177879 = VERTEX_POINT('',#177880); +#177880 = CARTESIAN_POINT('',(181.609816,-95.514239,1.585)); +#177881 = CIRCLE('',#177882,0.815433004022); +#177882 = AXIS2_PLACEMENT_3D('',#177883,#177884,#177885); +#177883 = CARTESIAN_POINT('',(181.3264685,-94.74961806235,1.585)); +#177884 = DIRECTION('',(0.,0.,1.)); +#177885 = DIRECTION('',(-0.347481029836,-0.937687012763,0.)); +#177886 = ORIENTED_EDGE('',*,*,#177887,.T.); +#177887 = EDGE_CURVE('',#177879,#177888,#177890,.T.); +#177888 = VERTEX_POINT('',#177889); +#177889 = CARTESIAN_POINT('',(181.686803,-95.475745,1.585)); +#177890 = LINE('',#177891,#177892); +#177891 = CARTESIAN_POINT('',(181.609816,-95.514239,1.585)); +#177892 = VECTOR('',#177893,1.); +#177893 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#177894 = ORIENTED_EDGE('',*,*,#177895,.T.); +#177895 = EDGE_CURVE('',#177888,#177896,#177898,.T.); +#177896 = VERTEX_POINT('',#177897); +#177897 = CARTESIAN_POINT('',(181.717211,-95.445338,1.585)); +#177898 = LINE('',#177899,#177900); +#177899 = CARTESIAN_POINT('',(181.686803,-95.475745,1.585)); +#177900 = VECTOR('',#177901,1.); +#177901 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#177902 = ORIENTED_EDGE('',*,*,#177903,.T.); +#177903 = EDGE_CURVE('',#177896,#177904,#177906,.T.); +#177904 = VERTEX_POINT('',#177905); +#177905 = CARTESIAN_POINT('',(181.717211,-95.248479,1.585)); +#177906 = CIRCLE('',#177907,0.148515070089); +#177907 = AXIS2_PLACEMENT_3D('',#177908,#177909,#177910); +#177908 = CARTESIAN_POINT('',(181.60599787319,-95.3469085,1.585)); +#177909 = DIRECTION('',(0.,-0.,1.)); +#177910 = DIRECTION('',(0.748833951572,-0.6627576578,-0.)); +#177911 = ORIENTED_EDGE('',*,*,#177912,.T.); +#177912 = EDGE_CURVE('',#177904,#177913,#177915,.T.); +#177913 = VERTEX_POINT('',#177914); +#177914 = CARTESIAN_POINT('',(181.686803,-95.218072,1.585)); +#177915 = LINE('',#177916,#177917); +#177916 = CARTESIAN_POINT('',(181.717211,-95.248479,1.585)); +#177917 = VECTOR('',#177918,1.); +#177918 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#177919 = ORIENTED_EDGE('',*,*,#177920,.T.); +#177920 = EDGE_CURVE('',#177913,#177827,#177921,.T.); +#177921 = LINE('',#177922,#177923); +#177922 = CARTESIAN_POINT('',(181.686803,-95.218072,1.585)); +#177923 = VECTOR('',#177924,1.); +#177924 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#177925 = PLANE('',#177926); +#177926 = AXIS2_PLACEMENT_3D('',#177927,#177928,#177929); +#177927 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177928 = DIRECTION('',(0.,0.,1.)); +#177929 = DIRECTION('',(1.,0.,-0.)); +#177930 = SHELL_BASED_SURFACE_MODEL('',(#177931)); +#177931 = OPEN_SHELL('',(#177932)); +#177932 = ADVANCED_FACE('',(#177933),#177969,.T.); +#177933 = FACE_BOUND('',#177934,.F.); +#177934 = EDGE_LOOP('',(#177935,#177946,#177954,#177963)); +#177935 = ORIENTED_EDGE('',*,*,#177936,.T.); +#177936 = EDGE_CURVE('',#177937,#177939,#177941,.T.); +#177937 = VERTEX_POINT('',#177938); +#177938 = CARTESIAN_POINT('',(129.930398,-95.6481,1.585)); +#177939 = VERTEX_POINT('',#177940); +#177940 = CARTESIAN_POINT('',(129.930398,-95.5281,1.585)); +#177941 = CIRCLE('',#177942,6.000000000042E-02); +#177942 = AXIS2_PLACEMENT_3D('',#177943,#177944,#177945); +#177943 = CARTESIAN_POINT('',(129.93039777441,-95.5881,1.585)); +#177944 = DIRECTION('',(0.,0.,-1.)); +#177945 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#177946 = ORIENTED_EDGE('',*,*,#177947,.T.); +#177947 = EDGE_CURVE('',#177939,#177948,#177950,.T.); +#177948 = VERTEX_POINT('',#177949); +#177949 = CARTESIAN_POINT('',(130.452902,-95.5281,1.585)); +#177950 = LINE('',#177951,#177952); +#177951 = CARTESIAN_POINT('',(129.930398,-95.5281,1.585)); +#177952 = VECTOR('',#177953,1.); +#177953 = DIRECTION('',(1.,0.,0.)); +#177954 = ORIENTED_EDGE('',*,*,#177955,.T.); +#177955 = EDGE_CURVE('',#177948,#177956,#177958,.T.); +#177956 = VERTEX_POINT('',#177957); +#177957 = CARTESIAN_POINT('',(130.452902,-95.6481,1.585)); +#177958 = CIRCLE('',#177959,6.000000000043E-02); +#177959 = AXIS2_PLACEMENT_3D('',#177960,#177961,#177962); +#177960 = CARTESIAN_POINT('',(130.45290222558,-95.5881,1.585)); +#177961 = DIRECTION('',(0.,0.,-1.)); +#177962 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#177963 = ORIENTED_EDGE('',*,*,#177964,.T.); +#177964 = EDGE_CURVE('',#177956,#177937,#177965,.T.); +#177965 = LINE('',#177966,#177967); +#177966 = CARTESIAN_POINT('',(130.452902,-95.6481,1.585)); +#177967 = VECTOR('',#177968,1.); +#177968 = DIRECTION('',(-1.,0.,0.)); +#177969 = PLANE('',#177970); +#177970 = AXIS2_PLACEMENT_3D('',#177971,#177972,#177973); +#177971 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177972 = DIRECTION('',(0.,0.,1.)); +#177973 = DIRECTION('',(1.,0.,-0.)); +#177974 = SHELL_BASED_SURFACE_MODEL('',(#177975)); +#177975 = OPEN_SHELL('',(#177976)); +#177976 = ADVANCED_FACE('',(#177977,#178088),#178147,.T.); +#177977 = FACE_BOUND('',#177978,.F.); +#177978 = EDGE_LOOP('',(#177979,#177989,#177998,#178006,#178014,#178022, + #178031,#178039,#178048,#178056,#178065,#178073,#178082)); +#177979 = ORIENTED_EDGE('',*,*,#177980,.T.); +#177980 = EDGE_CURVE('',#177981,#177983,#177985,.T.); +#177981 = VERTEX_POINT('',#177982); +#177982 = CARTESIAN_POINT('',(96.803518,-95.086979,1.585)); +#177983 = VERTEX_POINT('',#177984); +#177984 = CARTESIAN_POINT('',(97.174623,-94.828966,1.585)); +#177985 = LINE('',#177986,#177987); +#177986 = CARTESIAN_POINT('',(96.803518,-95.086979,1.585)); +#177987 = VECTOR('',#177988,1.); +#177988 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#177989 = ORIENTED_EDGE('',*,*,#177990,.T.); +#177990 = EDGE_CURVE('',#177983,#177991,#177993,.T.); +#177991 = VERTEX_POINT('',#177992); +#177992 = CARTESIAN_POINT('',(97.247829,-94.959061,1.585)); +#177993 = CIRCLE('',#177994,7.500005951703E-02); +#177994 = AXIS2_PLACEMENT_3D('',#177995,#177996,#177997); +#177995 = CARTESIAN_POINT('',(97.204818747396,-94.89761893705,1.585)); +#177996 = DIRECTION('',(0.,0.,-1.)); +#177997 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#177998 = ORIENTED_EDGE('',*,*,#177999,.T.); +#177999 = EDGE_CURVE('',#177991,#178000,#178002,.T.); +#178000 = VERTEX_POINT('',#178001); +#178001 = CARTESIAN_POINT('',(96.803628,-95.270001,1.585)); +#178002 = LINE('',#178003,#178004); +#178003 = CARTESIAN_POINT('',(97.247829,-94.959061,1.585)); +#178004 = VECTOR('',#178005,1.); +#178005 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#178006 = ORIENTED_EDGE('',*,*,#178007,.T.); +#178007 = EDGE_CURVE('',#178000,#178008,#178010,.T.); +#178008 = VERTEX_POINT('',#178009); +#178009 = CARTESIAN_POINT('',(96.803628,-95.394047,1.585)); +#178010 = LINE('',#178011,#178012); +#178011 = CARTESIAN_POINT('',(96.803628,-95.270001,1.585)); +#178012 = VECTOR('',#178013,1.); +#178013 = DIRECTION('',(0.,-1.,0.)); +#178014 = ORIENTED_EDGE('',*,*,#178015,.T.); +#178015 = EDGE_CURVE('',#178008,#178016,#178018,.T.); +#178016 = VERTEX_POINT('',#178017); +#178017 = CARTESIAN_POINT('',(97.219451,-95.395488,1.585)); +#178018 = LINE('',#178019,#178020); +#178019 = CARTESIAN_POINT('',(96.803628,-95.394047,1.585)); +#178020 = VECTOR('',#178021,1.); +#178021 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#178022 = ORIENTED_EDGE('',*,*,#178023,.T.); +#178023 = EDGE_CURVE('',#178016,#178024,#178026,.T.); +#178024 = VERTEX_POINT('',#178025); +#178025 = CARTESIAN_POINT('',(97.204819,-95.544047,1.585)); +#178026 = CIRCLE('',#178027,7.500006711464E-02); +#178027 = AXIS2_PLACEMENT_3D('',#178028,#178029,#178030); +#178028 = CARTESIAN_POINT('',(97.204819067115,-95.46904693288,1.585)); +#178029 = DIRECTION('',(0.,0.,-1.)); +#178030 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#178031 = ORIENTED_EDGE('',*,*,#178032,.T.); +#178032 = EDGE_CURVE('',#178024,#178033,#178035,.T.); +#178033 = VERTEX_POINT('',#178034); +#178034 = CARTESIAN_POINT('',(96.190187,-95.542606,1.585)); +#178035 = LINE('',#178036,#178037); +#178036 = CARTESIAN_POINT('',(97.204819,-95.544047,1.585)); +#178037 = VECTOR('',#178038,1.); +#178038 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#178039 = ORIENTED_EDGE('',*,*,#178040,.T.); +#178040 = EDGE_CURVE('',#178033,#178041,#178043,.T.); +#178041 = VERTEX_POINT('',#178042); +#178042 = CARTESIAN_POINT('',(96.129819,-95.469047,1.585)); +#178043 = CIRCLE('',#178044,7.500074938989E-02); +#178044 = AXIS2_PLACEMENT_3D('',#178045,#178046,#178047); +#178045 = CARTESIAN_POINT('',(96.204819749388,-95.46904653389,1.585)); +#178046 = DIRECTION('',(0.,0.,-1.)); +#178047 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#178048 = ORIENTED_EDGE('',*,*,#178049,.T.); +#178049 = EDGE_CURVE('',#178041,#178050,#178052,.T.); +#178050 = VERTEX_POINT('',#178051); +#178051 = CARTESIAN_POINT('',(96.132482,-95.068286,1.585)); +#178052 = LINE('',#178053,#178054); +#178053 = CARTESIAN_POINT('',(96.129819,-95.469047,1.585)); +#178054 = VECTOR('',#178055,1.); +#178055 = DIRECTION('',(6.644711463211E-03,0.999977923661,0.)); +#178056 = ORIENTED_EDGE('',*,*,#178057,.T.); +#178057 = EDGE_CURVE('',#178050,#178058,#178060,.T.); +#178058 = VERTEX_POINT('',#178059); +#178059 = CARTESIAN_POINT('',(96.380663,-94.82406,1.585)); +#178060 = CIRCLE('',#178061,0.3486213829); +#178061 = AXIS2_PLACEMENT_3D('',#178062,#178063,#178064); +#178062 = CARTESIAN_POINT('',(96.468423229516,-95.16145444383,1.585)); +#178063 = DIRECTION('',(0.,0.,-1.)); +#178064 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#178065 = ORIENTED_EDGE('',*,*,#178066,.T.); +#178066 = EDGE_CURVE('',#178058,#178067,#178069,.T.); +#178067 = VERTEX_POINT('',#178068); +#178068 = CARTESIAN_POINT('',(96.552784,-94.82406,1.585)); +#178069 = LINE('',#178070,#178071); +#178070 = CARTESIAN_POINT('',(96.380663,-94.82406,1.585)); +#178071 = VECTOR('',#178072,1.); +#178072 = DIRECTION('',(1.,0.,0.)); +#178073 = ORIENTED_EDGE('',*,*,#178074,.T.); +#178074 = EDGE_CURVE('',#178067,#178075,#178077,.T.); +#178075 = VERTEX_POINT('',#178076); +#178076 = CARTESIAN_POINT('',(96.802187,-95.073463,1.585)); +#178077 = CIRCLE('',#178078,0.347870264855); +#178078 = AXIS2_PLACEMENT_3D('',#178079,#178080,#178081); +#178079 = CARTESIAN_POINT('',(96.465456265028,-95.16079073497,1.585)); +#178080 = DIRECTION('',(0.,0.,-1.)); +#178081 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#178082 = ORIENTED_EDGE('',*,*,#178083,.T.); +#178083 = EDGE_CURVE('',#178075,#177981,#178084,.T.); +#178084 = LINE('',#178085,#178086); +#178085 = CARTESIAN_POINT('',(96.802187,-95.073463,1.585)); +#178086 = VECTOR('',#178087,1.); +#178087 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#178088 = FACE_BOUND('',#178089,.F.); +#178089 = EDGE_LOOP('',(#178090,#178101,#178109,#178117,#178125,#178133, + #178141)); +#178090 = ORIENTED_EDGE('',*,*,#178091,.T.); +#178091 = EDGE_CURVE('',#178092,#178094,#178096,.T.); +#178092 = VERTEX_POINT('',#178093); +#178093 = CARTESIAN_POINT('',(96.588963,-95.006877,1.585)); +#178094 = VERTEX_POINT('',#178095); +#178095 = CARTESIAN_POINT('',(96.314077,-95.037284,1.585)); +#178096 = CIRCLE('',#178097,0.198386215365); +#178097 = AXIS2_PLACEMENT_3D('',#178098,#178099,#178100); +#178098 = CARTESIAN_POINT('',(96.467159957837,-95.1634691753,1.585)); +#178099 = DIRECTION('',(0.,0.,1.)); +#178100 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#178101 = ORIENTED_EDGE('',*,*,#178102,.T.); +#178102 = EDGE_CURVE('',#178094,#178103,#178105,.T.); +#178103 = VERTEX_POINT('',#178104); +#178104 = CARTESIAN_POINT('',(96.279819,-95.1058,1.585)); +#178105 = LINE('',#178106,#178107); +#178106 = CARTESIAN_POINT('',(96.314077,-95.037284,1.585)); +#178107 = VECTOR('',#178108,1.); +#178108 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#178109 = ORIENTED_EDGE('',*,*,#178110,.T.); +#178110 = EDGE_CURVE('',#178103,#178111,#178113,.T.); +#178111 = VERTEX_POINT('',#178112); +#178112 = CARTESIAN_POINT('',(96.279819,-95.394047,1.585)); +#178113 = LINE('',#178114,#178115); +#178114 = CARTESIAN_POINT('',(96.279819,-95.1058,1.585)); +#178115 = VECTOR('',#178116,1.); +#178116 = DIRECTION('',(0.,-1.,0.)); +#178117 = ORIENTED_EDGE('',*,*,#178118,.T.); +#178118 = EDGE_CURVE('',#178111,#178119,#178121,.T.); +#178119 = VERTEX_POINT('',#178120); +#178120 = CARTESIAN_POINT('',(96.653628,-95.394047,1.585)); +#178121 = LINE('',#178122,#178123); +#178122 = CARTESIAN_POINT('',(96.279819,-95.394047,1.585)); +#178123 = VECTOR('',#178124,1.); +#178124 = DIRECTION('',(1.,0.,0.)); +#178125 = ORIENTED_EDGE('',*,*,#178126,.T.); +#178126 = EDGE_CURVE('',#178119,#178127,#178129,.T.); +#178127 = VERTEX_POINT('',#178128); +#178128 = CARTESIAN_POINT('',(96.653628,-95.1058,1.585)); +#178129 = LINE('',#178130,#178131); +#178130 = CARTESIAN_POINT('',(96.653628,-95.394047,1.585)); +#178131 = VECTOR('',#178132,1.); +#178132 = DIRECTION('',(0.,1.,0.)); +#178133 = ORIENTED_EDGE('',*,*,#178134,.T.); +#178134 = EDGE_CURVE('',#178127,#178135,#178137,.T.); +#178135 = VERTEX_POINT('',#178136); +#178136 = CARTESIAN_POINT('',(96.61937,-95.037284,1.585)); +#178137 = LINE('',#178138,#178139); +#178138 = CARTESIAN_POINT('',(96.653628,-95.1058,1.585)); +#178139 = VECTOR('',#178140,1.); +#178140 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#178141 = ORIENTED_EDGE('',*,*,#178142,.T.); +#178142 = EDGE_CURVE('',#178135,#178092,#178143,.T.); +#178143 = LINE('',#178144,#178145); +#178144 = CARTESIAN_POINT('',(96.61937,-95.037284,1.585)); +#178145 = VECTOR('',#178146,1.); +#178146 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#178147 = PLANE('',#178148); +#178148 = AXIS2_PLACEMENT_3D('',#178149,#178150,#178151); +#178149 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178150 = DIRECTION('',(0.,0.,1.)); +#178151 = DIRECTION('',(1.,0.,-0.)); +#178152 = SHELL_BASED_SURFACE_MODEL('',(#178153)); +#178153 = OPEN_SHELL('',(#178154)); +#178154 = ADVANCED_FACE('',(#178155),#178249,.T.); +#178155 = FACE_BOUND('',#178156,.F.); +#178156 = EDGE_LOOP('',(#178157,#178168,#178176,#178185,#178193,#178201, + #178209,#178217,#178226,#178234,#178243)); +#178157 = ORIENTED_EDGE('',*,*,#178158,.T.); +#178158 = EDGE_CURVE('',#178159,#178161,#178163,.T.); +#178159 = VERTEX_POINT('',#178160); +#178160 = CARTESIAN_POINT('',(82.683526,-94.530452,1.585)); +#178161 = VERTEX_POINT('',#178162); +#178162 = CARTESIAN_POINT('',(82.683526,-94.236216,1.585)); +#178163 = CIRCLE('',#178164,0.150000292066); +#178164 = AXIS2_PLACEMENT_3D('',#178165,#178166,#178167); +#178165 = CARTESIAN_POINT('',(82.71279,-94.383334,1.585)); +#178166 = DIRECTION('',(0.,0.,-1.)); +#178167 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#178168 = ORIENTED_EDGE('',*,*,#178169,.T.); +#178169 = EDGE_CURVE('',#178161,#178170,#178172,.T.); +#178170 = VERTEX_POINT('',#178171); +#178171 = CARTESIAN_POINT('',(84.475387,-94.236216,1.585)); +#178172 = LINE('',#178173,#178174); +#178173 = CARTESIAN_POINT('',(82.683526,-94.236216,1.585)); +#178174 = VECTOR('',#178175,1.); +#178175 = DIRECTION('',(1.,0.,0.)); +#178176 = ORIENTED_EDGE('',*,*,#178177,.T.); +#178177 = EDGE_CURVE('',#178170,#178178,#178180,.T.); +#178178 = VERTEX_POINT('',#178179); +#178179 = CARTESIAN_POINT('',(84.435313,-94.533334,1.585)); +#178180 = CIRCLE('',#178181,0.150208531225); +#178181 = AXIS2_PLACEMENT_3D('',#178182,#178183,#178184); +#178182 = CARTESIAN_POINT('',(84.445878305712,-94.38349749854,1.585)); +#178183 = DIRECTION('',(0.,0.,-1.)); +#178184 = DIRECTION('',(0.196451520079,0.980513539049,0.)); +#178185 = ORIENTED_EDGE('',*,*,#178186,.T.); +#178186 = EDGE_CURVE('',#178178,#178187,#178189,.T.); +#178187 = VERTEX_POINT('',#178188); +#178188 = CARTESIAN_POINT('',(84.456478,-94.563871,1.585)); +#178189 = LINE('',#178190,#178191); +#178190 = CARTESIAN_POINT('',(84.435313,-94.533334,1.585)); +#178191 = VECTOR('',#178192,1.); +#178192 = DIRECTION('',(0.569646560297,-0.821889771406,0.)); +#178193 = ORIENTED_EDGE('',*,*,#178194,.T.); +#178194 = EDGE_CURVE('',#178187,#178195,#178197,.T.); +#178195 = VERTEX_POINT('',#178196); +#178196 = CARTESIAN_POINT('',(84.590797,-94.838953,1.585)); +#178197 = LINE('',#178198,#178199); +#178198 = CARTESIAN_POINT('',(84.456478,-94.563871,1.585)); +#178199 = VECTOR('',#178200,1.); +#178200 = DIRECTION('',(0.438773651866,-0.898597619865,0.)); +#178201 = ORIENTED_EDGE('',*,*,#178202,.T.); +#178202 = EDGE_CURVE('',#178195,#178203,#178205,.T.); +#178203 = VERTEX_POINT('',#178204); +#178204 = CARTESIAN_POINT('',(84.596123,-94.878572,1.585)); +#178205 = LINE('',#178206,#178207); +#178206 = CARTESIAN_POINT('',(84.590797,-94.838953,1.585)); +#178207 = VECTOR('',#178208,1.); +#178208 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#178209 = ORIENTED_EDGE('',*,*,#178210,.T.); +#178210 = EDGE_CURVE('',#178203,#178211,#178213,.T.); +#178211 = VERTEX_POINT('',#178212); +#178212 = CARTESIAN_POINT('',(84.593241,-95.155455,1.585)); +#178213 = LINE('',#178214,#178215); +#178214 = CARTESIAN_POINT('',(84.596123,-94.878572,1.585)); +#178215 = VECTOR('',#178216,1.); +#178216 = DIRECTION('',(-1.040816479305E-02,-0.999945833586,0.)); +#178217 = ORIENTED_EDGE('',*,*,#178218,.T.); +#178218 = EDGE_CURVE('',#178211,#178219,#178221,.T.); +#178219 = VERTEX_POINT('',#178220); +#178220 = CARTESIAN_POINT('',(84.299005,-95.155455,1.585)); +#178221 = CIRCLE('',#178222,0.150000292066); +#178222 = AXIS2_PLACEMENT_3D('',#178223,#178224,#178225); +#178223 = CARTESIAN_POINT('',(84.446123,-95.126191,1.585)); +#178224 = DIRECTION('',(-0.,0.,-1.)); +#178225 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#178226 = ORIENTED_EDGE('',*,*,#178227,.T.); +#178227 = EDGE_CURVE('',#178219,#178228,#178230,.T.); +#178228 = VERTEX_POINT('',#178229); +#178229 = CARTESIAN_POINT('',(84.296123,-94.913981,1.585)); +#178230 = LINE('',#178231,#178232); +#178231 = CARTESIAN_POINT('',(84.299005,-95.155455,1.585)); +#178232 = VECTOR('',#178233,1.); +#178233 = DIRECTION('',(-1.1934182391E-02,0.99992878511,0.)); +#178234 = ORIENTED_EDGE('',*,*,#178235,.T.); +#178235 = EDGE_CURVE('',#178228,#178236,#178238,.T.); +#178236 = VERTEX_POINT('',#178237); +#178237 = CARTESIAN_POINT('',(83.915475,-94.533334,1.585)); +#178238 = CIRCLE('',#178239,0.536605331445); +#178239 = AXIS2_PLACEMENT_3D('',#178240,#178241,#178242); +#178240 = CARTESIAN_POINT('',(83.777547224704,-95.05191013764,1.585)); +#178241 = DIRECTION('',(0.,0.,1.)); +#178242 = DIRECTION('',(0.966400713721,0.257040192419,-0.)); +#178243 = ORIENTED_EDGE('',*,*,#178244,.T.); +#178244 = EDGE_CURVE('',#178236,#178159,#178245,.T.); +#178245 = LINE('',#178246,#178247); +#178246 = CARTESIAN_POINT('',(83.915475,-94.533334,1.585)); +#178247 = VECTOR('',#178248,1.); +#178248 = DIRECTION('',(-0.999997263656,2.339376154253E-03,0.)); +#178249 = PLANE('',#178250); +#178250 = AXIS2_PLACEMENT_3D('',#178251,#178252,#178253); +#178251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178252 = DIRECTION('',(0.,0.,1.)); +#178253 = DIRECTION('',(1.,0.,-0.)); +#178254 = SHELL_BASED_SURFACE_MODEL('',(#178255)); +#178255 = OPEN_SHELL('',(#178256)); +#178256 = ADVANCED_FACE('',(#178257),#178442,.T.); +#178257 = FACE_BOUND('',#178258,.F.); +#178258 = EDGE_LOOP('',(#178259,#178270,#178278,#178287,#178295,#178304, + #178312,#178321,#178329,#178337,#178345,#178354,#178362,#178371, + #178379,#178388,#178396,#178404,#178412,#178420,#178428,#178436)); +#178259 = ORIENTED_EDGE('',*,*,#178260,.T.); +#178260 = EDGE_CURVE('',#178261,#178263,#178265,.T.); +#178261 = VERTEX_POINT('',#178262); +#178262 = CARTESIAN_POINT('',(129.083078,-94.080381,1.585)); +#178263 = VERTEX_POINT('',#178264); +#178264 = CARTESIAN_POINT('',(129.542841,-94.083178,1.585)); +#178265 = CIRCLE('',#178266,0.460785175821); +#178266 = AXIS2_PLACEMENT_3D('',#178267,#178268,#178269); +#178267 = CARTESIAN_POINT('',(129.31053010897,-94.48111597024,1.585)); +#178268 = DIRECTION('',(0.,0.,-1.)); +#178269 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#178270 = ORIENTED_EDGE('',*,*,#178271,.T.); +#178271 = EDGE_CURVE('',#178263,#178272,#178274,.T.); +#178272 = VERTEX_POINT('',#178273); +#178273 = CARTESIAN_POINT('',(129.611152,-94.151489,1.585)); +#178274 = LINE('',#178275,#178276); +#178275 = CARTESIAN_POINT('',(129.542841,-94.083178,1.585)); +#178276 = VECTOR('',#178277,1.); +#178277 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#178278 = ORIENTED_EDGE('',*,*,#178279,.T.); +#178279 = EDGE_CURVE('',#178272,#178280,#178282,.T.); +#178280 = VERTEX_POINT('',#178281); +#178281 = CARTESIAN_POINT('',(129.495759,-94.24619,1.585)); +#178282 = CIRCLE('',#178283,7.500003178657E-02); +#178283 = AXIS2_PLACEMENT_3D('',#178284,#178285,#178286); +#178284 = CARTESIAN_POINT('',(129.54879156212,-94.1931565,1.585)); +#178285 = DIRECTION('',(0.,0.,-1.)); +#178286 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#178287 = ORIENTED_EDGE('',*,*,#178288,.T.); +#178288 = EDGE_CURVE('',#178280,#178289,#178291,.T.); +#178289 = VERTEX_POINT('',#178290); +#178290 = CARTESIAN_POINT('',(129.460659,-94.21109,1.585)); +#178291 = LINE('',#178292,#178293); +#178292 = CARTESIAN_POINT('',(129.495759,-94.24619,1.585)); +#178293 = VECTOR('',#178294,1.); +#178294 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#178295 = ORIENTED_EDGE('',*,*,#178296,.T.); +#178296 = EDGE_CURVE('',#178289,#178297,#178299,.T.); +#178297 = VERTEX_POINT('',#178298); +#178298 = CARTESIAN_POINT('',(129.160735,-94.21109,1.585)); +#178299 = CIRCLE('',#178300,0.299308637371); +#178300 = AXIS2_PLACEMENT_3D('',#178301,#178302,#178303); +#178301 = CARTESIAN_POINT('',(129.310697,-94.470121,1.585)); +#178302 = DIRECTION('',(0.,0.,1.)); +#178303 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#178304 = ORIENTED_EDGE('',*,*,#178305,.T.); +#178305 = EDGE_CURVE('',#178297,#178306,#178308,.T.); +#178306 = VERTEX_POINT('',#178307); +#178307 = CARTESIAN_POINT('',(129.086622,-94.285203,1.585)); +#178308 = LINE('',#178309,#178310); +#178309 = CARTESIAN_POINT('',(129.160735,-94.21109,1.585)); +#178310 = VECTOR('',#178311,1.); +#178311 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#178312 = ORIENTED_EDGE('',*,*,#178313,.T.); +#178313 = EDGE_CURVE('',#178306,#178314,#178316,.T.); +#178314 = VERTEX_POINT('',#178315); +#178315 = CARTESIAN_POINT('',(129.004745,-94.660113,1.585)); +#178316 = CIRCLE('',#178317,0.611712714363); +#178317 = AXIS2_PLACEMENT_3D('',#178318,#178319,#178320); +#178318 = CARTESIAN_POINT('',(129.61315027521,-94.5965876822,1.585)); +#178319 = DIRECTION('',(0.,0.,1.)); +#178320 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#178321 = ORIENTED_EDGE('',*,*,#178322,.T.); +#178322 = EDGE_CURVE('',#178314,#178323,#178325,.T.); +#178323 = VERTEX_POINT('',#178324); +#178324 = CARTESIAN_POINT('',(129.048128,-94.833647,1.585)); +#178325 = LINE('',#178326,#178327); +#178326 = CARTESIAN_POINT('',(129.004745,-94.660113,1.585)); +#178327 = VECTOR('',#178328,1.); +#178328 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#178329 = ORIENTED_EDGE('',*,*,#178330,.T.); +#178330 = EDGE_CURVE('',#178323,#178331,#178333,.T.); +#178331 = VERTEX_POINT('',#178332); +#178332 = CARTESIAN_POINT('',(129.086622,-94.910634,1.585)); +#178333 = LINE('',#178334,#178335); +#178334 = CARTESIAN_POINT('',(129.048128,-94.833647,1.585)); +#178335 = VECTOR('',#178336,1.); +#178336 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#178337 = ORIENTED_EDGE('',*,*,#178338,.T.); +#178338 = EDGE_CURVE('',#178331,#178339,#178341,.T.); +#178339 = VERTEX_POINT('',#178340); +#178340 = CARTESIAN_POINT('',(129.160735,-94.984748,1.585)); +#178341 = LINE('',#178342,#178343); +#178342 = CARTESIAN_POINT('',(129.086622,-94.910634,1.585)); +#178343 = VECTOR('',#178344,1.); +#178344 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#178345 = ORIENTED_EDGE('',*,*,#178346,.T.); +#178346 = EDGE_CURVE('',#178339,#178347,#178349,.T.); +#178347 = VERTEX_POINT('',#178348); +#178348 = CARTESIAN_POINT('',(129.460659,-94.984747,1.585)); +#178349 = CIRCLE('',#178350,0.299305962385); +#178350 = AXIS2_PLACEMENT_3D('',#178351,#178352,#178353); +#178351 = CARTESIAN_POINT('',(129.31069613635,-94.72571959093,1.585)); +#178352 = DIRECTION('',(0.,0.,1.)); +#178353 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#178354 = ORIENTED_EDGE('',*,*,#178355,.T.); +#178355 = EDGE_CURVE('',#178347,#178356,#178358,.T.); +#178356 = VERTEX_POINT('',#178357); +#178357 = CARTESIAN_POINT('',(129.507124,-94.94032,1.585)); +#178358 = LINE('',#178359,#178360); +#178359 = CARTESIAN_POINT('',(129.460659,-94.984747,1.585)); +#178360 = VECTOR('',#178361,1.); +#178361 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#178362 = ORIENTED_EDGE('',*,*,#178363,.T.); +#178363 = EDGE_CURVE('',#178356,#178364,#178366,.T.); +#178364 = VERTEX_POINT('',#178365); +#178365 = CARTESIAN_POINT('',(129.601825,-95.055713,1.585)); +#178366 = CIRCLE('',#178367,7.499993690112E-02); +#178367 = AXIS2_PLACEMENT_3D('',#178368,#178369,#178370); +#178368 = CARTESIAN_POINT('',(129.5487922483,-95.00267982374,1.585)); +#178369 = DIRECTION('',(0.,0.,-1.)); +#178370 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#178371 = ORIENTED_EDGE('',*,*,#178372,.T.); +#178372 = EDGE_CURVE('',#178364,#178373,#178375,.T.); +#178373 = VERTEX_POINT('',#178374); +#178374 = CARTESIAN_POINT('',(129.538315,-95.115457,1.585)); +#178375 = LINE('',#178376,#178377); +#178376 = CARTESIAN_POINT('',(129.601825,-95.055713,1.585)); +#178377 = VECTOR('',#178378,1.); +#178378 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#178379 = ORIENTED_EDGE('',*,*,#178380,.T.); +#178380 = EDGE_CURVE('',#178373,#178381,#178383,.T.); +#178381 = VERTEX_POINT('',#178382); +#178382 = CARTESIAN_POINT('',(129.078553,-95.112661,1.585)); +#178383 = CIRCLE('',#178384,0.461067828848); +#178384 = AXIS2_PLACEMENT_3D('',#178385,#178386,#178387); +#178385 = CARTESIAN_POINT('',(129.31086451268,-94.71439613352,1.585)); +#178386 = DIRECTION('',(-0.,0.,-1.)); +#178387 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#178388 = ORIENTED_EDGE('',*,*,#178389,.T.); +#178389 = EDGE_CURVE('',#178381,#178390,#178392,.T.); +#178390 = VERTEX_POINT('',#178391); +#178391 = CARTESIAN_POINT('',(128.961864,-94.994898,1.585)); +#178392 = LINE('',#178393,#178394); +#178393 = CARTESIAN_POINT('',(129.078553,-95.112661,1.585)); +#178394 = VECTOR('',#178395,1.); +#178395 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#178396 = ORIENTED_EDGE('',*,*,#178397,.T.); +#178397 = EDGE_CURVE('',#178390,#178398,#178400,.T.); +#178398 = VERTEX_POINT('',#178399); +#178399 = CARTESIAN_POINT('',(128.904603,-94.878013,1.585)); +#178400 = LINE('',#178401,#178402); +#178401 = CARTESIAN_POINT('',(128.961864,-94.994898,1.585)); +#178402 = VECTOR('',#178403,1.); +#178403 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#178404 = ORIENTED_EDGE('',*,*,#178405,.T.); +#178405 = EDGE_CURVE('',#178398,#178406,#178408,.T.); +#178406 = VERTEX_POINT('',#178407); +#178407 = CARTESIAN_POINT('',(128.854745,-94.669347,1.585)); +#178408 = LINE('',#178409,#178410); +#178409 = CARTESIAN_POINT('',(128.904603,-94.878013,1.585)); +#178410 = VECTOR('',#178411,1.); +#178411 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#178412 = ORIENTED_EDGE('',*,*,#178413,.T.); +#178413 = EDGE_CURVE('',#178406,#178414,#178416,.T.); +#178414 = VERTEX_POINT('',#178415); +#178415 = CARTESIAN_POINT('',(128.856984,-94.5083,1.585)); +#178416 = LINE('',#178417,#178418); +#178417 = CARTESIAN_POINT('',(128.854745,-94.669347,1.585)); +#178418 = VECTOR('',#178419,1.); +#178419 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#178420 = ORIENTED_EDGE('',*,*,#178421,.T.); +#178421 = EDGE_CURVE('',#178414,#178422,#178424,.T.); +#178422 = VERTEX_POINT('',#178423); +#178423 = CARTESIAN_POINT('',(128.910282,-94.302473,1.585)); +#178424 = LINE('',#178425,#178426); +#178425 = CARTESIAN_POINT('',(128.856984,-94.5083,1.585)); +#178426 = VECTOR('',#178427,1.); +#178427 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#178428 = ORIENTED_EDGE('',*,*,#178429,.T.); +#178429 = EDGE_CURVE('',#178422,#178430,#178432,.T.); +#178430 = VERTEX_POINT('',#178431); +#178431 = CARTESIAN_POINT('',(128.967231,-94.193492,1.585)); +#178432 = LINE('',#178433,#178434); +#178433 = CARTESIAN_POINT('',(128.910282,-94.302473,1.585)); +#178434 = VECTOR('',#178435,1.); +#178435 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#178436 = ORIENTED_EDGE('',*,*,#178437,.T.); +#178437 = EDGE_CURVE('',#178430,#178261,#178438,.T.); +#178438 = LINE('',#178439,#178440); +#178439 = CARTESIAN_POINT('',(128.967231,-94.193492,1.585)); +#178440 = VECTOR('',#178441,1.); +#178441 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#178442 = PLANE('',#178443); +#178443 = AXIS2_PLACEMENT_3D('',#178444,#178445,#178446); +#178444 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178445 = DIRECTION('',(0.,0.,1.)); +#178446 = DIRECTION('',(1.,0.,-0.)); +#178447 = SHELL_BASED_SURFACE_MODEL('',(#178448)); +#178448 = OPEN_SHELL('',(#178449)); +#178449 = ADVANCED_FACE('',(#178450),#178636,.T.); +#178450 = FACE_BOUND('',#178451,.F.); +#178451 = EDGE_LOOP('',(#178452,#178463,#178471,#178480,#178488,#178496, + #178505,#178513,#178522,#178530,#178538,#178546,#178555,#178563, + #178572,#178580,#178589,#178597,#178605,#178613,#178622,#178630)); +#178452 = ORIENTED_EDGE('',*,*,#178453,.T.); +#178453 = EDGE_CURVE('',#178454,#178456,#178458,.T.); +#178454 = VERTEX_POINT('',#178455); +#178455 = CARTESIAN_POINT('',(129.867494,-94.171478,1.585)); +#178456 = VERTEX_POINT('',#178457); +#178457 = CARTESIAN_POINT('',(129.882126,-94.022919,1.585)); +#178458 = CIRCLE('',#178459,7.500006711464E-02); +#178459 = AXIS2_PLACEMENT_3D('',#178460,#178461,#178462); +#178460 = CARTESIAN_POINT('',(129.88212593288,-94.09791906711,1.585)); +#178461 = DIRECTION('',(0.,0.,-1.)); +#178462 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#178463 = ORIENTED_EDGE('',*,*,#178464,.T.); +#178464 = EDGE_CURVE('',#178456,#178465,#178467,.T.); +#178465 = VERTEX_POINT('',#178466); +#178466 = CARTESIAN_POINT('',(130.508911,-94.023681,1.585)); +#178467 = LINE('',#178468,#178469); +#178468 = CARTESIAN_POINT('',(129.882126,-94.022919,1.585)); +#178469 = VECTOR('',#178470,1.); +#178470 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#178471 = ORIENTED_EDGE('',*,*,#178472,.T.); +#178472 = EDGE_CURVE('',#178465,#178473,#178475,.T.); +#178473 = VERTEX_POINT('',#178474); +#178474 = CARTESIAN_POINT('',(130.574732,-94.112551,1.585)); +#178475 = CIRCLE('',#178476,7.447391611627E-02); +#178476 = AXIS2_PLACEMENT_3D('',#178477,#178478,#178479); +#178477 = CARTESIAN_POINT('',(130.50173192664,-94.0978080874,1.585)); +#178478 = DIRECTION('',(0.,0.,-1.)); +#178479 = DIRECTION('',(9.639715124812E-02,0.995342950561,0.)); +#178480 = ORIENTED_EDGE('',*,*,#178481,.T.); +#178481 = EDGE_CURVE('',#178473,#178482,#178484,.T.); +#178482 = VERTEX_POINT('',#178483); +#178483 = CARTESIAN_POINT('',(130.557616,-94.147307,1.585)); +#178484 = LINE('',#178485,#178486); +#178485 = CARTESIAN_POINT('',(130.574732,-94.112551,1.585)); +#178486 = VECTOR('',#178487,1.); +#178487 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#178488 = ORIENTED_EDGE('',*,*,#178489,.T.); +#178489 = EDGE_CURVE('',#178482,#178490,#178492,.T.); +#178490 = VERTEX_POINT('',#178491); +#178491 = CARTESIAN_POINT('',(130.33072,-94.406616,1.585)); +#178492 = LINE('',#178493,#178494); +#178493 = CARTESIAN_POINT('',(130.557616,-94.147307,1.585)); +#178494 = VECTOR('',#178495,1.); +#178495 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#178496 = ORIENTED_EDGE('',*,*,#178497,.T.); +#178497 = EDGE_CURVE('',#178490,#178498,#178500,.T.); +#178498 = VERTEX_POINT('',#178499); +#178499 = CARTESIAN_POINT('',(130.574732,-94.654715,1.585)); +#178500 = CIRCLE('',#178501,0.348520834816); +#178501 = AXIS2_PLACEMENT_3D('',#178502,#178503,#178504); +#178502 = CARTESIAN_POINT('',(130.2374266174,-94.74241819931,1.585)); +#178503 = DIRECTION('',(0.,0.,-1.)); +#178504 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#178505 = ORIENTED_EDGE('',*,*,#178506,.T.); +#178506 = EDGE_CURVE('',#178498,#178507,#178509,.T.); +#178507 = VERTEX_POINT('',#178508); +#178508 = CARTESIAN_POINT('',(130.57351,-94.927252,1.585)); +#178509 = LINE('',#178510,#178511); +#178510 = CARTESIAN_POINT('',(130.574732,-94.654715,1.585)); +#178511 = VECTOR('',#178512,1.); +#178512 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#178513 = ORIENTED_EDGE('',*,*,#178514,.T.); +#178514 = EDGE_CURVE('',#178507,#178515,#178517,.T.); +#178515 = VERTEX_POINT('',#178516); +#178516 = CARTESIAN_POINT('',(130.325329,-95.171478,1.585)); +#178517 = CIRCLE('',#178518,0.348635327447); +#178518 = AXIS2_PLACEMENT_3D('',#178519,#178520,#178521); +#178519 = CARTESIAN_POINT('',(130.23755748129,-94.83407208415,1.585)); +#178520 = DIRECTION('',(0.,0.,-1.)); +#178521 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#178522 = ORIENTED_EDGE('',*,*,#178523,.T.); +#178523 = EDGE_CURVE('',#178515,#178524,#178526,.T.); +#178524 = VERTEX_POINT('',#178525); +#178525 = CARTESIAN_POINT('',(130.005173,-95.170256,1.585)); +#178526 = LINE('',#178527,#178528); +#178527 = CARTESIAN_POINT('',(130.325329,-95.171478,1.585)); +#178528 = VECTOR('',#178529,1.); +#178529 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#178530 = ORIENTED_EDGE('',*,*,#178531,.T.); +#178531 = EDGE_CURVE('',#178524,#178532,#178534,.T.); +#178532 = VERTEX_POINT('',#178533); +#178533 = CARTESIAN_POINT('',(129.88246,-95.10805,1.585)); +#178534 = LINE('',#178535,#178536); +#178535 = CARTESIAN_POINT('',(130.005173,-95.170256,1.585)); +#178536 = VECTOR('',#178537,1.); +#178537 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#178538 = ORIENTED_EDGE('',*,*,#178539,.T.); +#178539 = EDGE_CURVE('',#178532,#178540,#178542,.T.); +#178540 = VERTEX_POINT('',#178541); +#178541 = CARTESIAN_POINT('',(129.819765,-95.044347,1.585)); +#178542 = LINE('',#178543,#178544); +#178543 = CARTESIAN_POINT('',(129.88246,-95.10805,1.585)); +#178544 = VECTOR('',#178545,1.); +#178545 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#178546 = ORIENTED_EDGE('',*,*,#178547,.T.); +#178547 = EDGE_CURVE('',#178540,#178548,#178550,.T.); +#178548 = VERTEX_POINT('',#178549); +#178549 = CARTESIAN_POINT('',(129.93516,-94.949648,1.585)); +#178550 = CIRCLE('',#178551,7.50001266804E-02); +#178551 = AXIS2_PLACEMENT_3D('',#178552,#178553,#178554); +#178552 = CARTESIAN_POINT('',(129.88212605199,-95.00268024831,1.585)); +#178553 = DIRECTION('',(0.,0.,-1.)); +#178554 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#178555 = ORIENTED_EDGE('',*,*,#178556,.T.); +#178556 = EDGE_CURVE('',#178548,#178557,#178559,.T.); +#178557 = VERTEX_POINT('',#178558); +#178558 = CARTESIAN_POINT('',(129.974172,-94.988661,1.585)); +#178559 = LINE('',#178560,#178561); +#178560 = CARTESIAN_POINT('',(129.93516,-94.949648,1.585)); +#178561 = VECTOR('',#178562,1.); +#178562 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#178563 = ORIENTED_EDGE('',*,*,#178564,.T.); +#178564 = EDGE_CURVE('',#178557,#178565,#178567,.T.); +#178565 = VERTEX_POINT('',#178566); +#178566 = CARTESIAN_POINT('',(130.361507,-94.988661,1.585)); +#178567 = CIRCLE('',#178568,0.358502380266); +#178568 = AXIS2_PLACEMENT_3D('',#178569,#178570,#178571); +#178569 = CARTESIAN_POINT('',(130.1678395,-94.686971,1.585)); +#178570 = DIRECTION('',(0.,0.,1.)); +#178571 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#178572 = ORIENTED_EDGE('',*,*,#178573,.T.); +#178573 = EDGE_CURVE('',#178565,#178574,#178576,.T.); +#178574 = VERTEX_POINT('',#178575); +#178575 = CARTESIAN_POINT('',(130.391914,-94.958253,1.585)); +#178576 = LINE('',#178577,#178578); +#178577 = CARTESIAN_POINT('',(130.361507,-94.988661,1.585)); +#178578 = VECTOR('',#178579,1.); +#178579 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#178580 = ORIENTED_EDGE('',*,*,#178581,.T.); +#178581 = EDGE_CURVE('',#178574,#178582,#178584,.T.); +#178582 = VERTEX_POINT('',#178583); +#178583 = CARTESIAN_POINT('',(130.391915,-94.618536,1.585)); +#178584 = CIRCLE('',#178585,0.305616146029); +#178585 = AXIS2_PLACEMENT_3D('',#178586,#178587,#178588); +#178586 = CARTESIAN_POINT('',(130.13784892049,-94.78839375212,1.585)); +#178587 = DIRECTION('',(0.,-0.,1.)); +#178588 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#178589 = ORIENTED_EDGE('',*,*,#178590,.T.); +#178590 = EDGE_CURVE('',#178582,#178591,#178593,.T.); +#178591 = VERTEX_POINT('',#178592); +#178592 = CARTESIAN_POINT('',(130.361508,-94.588129,1.585)); +#178593 = LINE('',#178594,#178595); +#178594 = CARTESIAN_POINT('',(130.391915,-94.618536,1.585)); +#178595 = VECTOR('',#178596,1.); +#178596 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#178597 = ORIENTED_EDGE('',*,*,#178598,.T.); +#178598 = EDGE_CURVE('',#178591,#178599,#178601,.T.); +#178599 = VERTEX_POINT('',#178600); +#178600 = CARTESIAN_POINT('',(130.292992,-94.553871,1.585)); +#178601 = LINE('',#178602,#178603); +#178602 = CARTESIAN_POINT('',(130.361508,-94.588129,1.585)); +#178603 = VECTOR('',#178604,1.); +#178604 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#178605 = ORIENTED_EDGE('',*,*,#178606,.T.); +#178606 = EDGE_CURVE('',#178599,#178607,#178609,.T.); +#178607 = VERTEX_POINT('',#178608); +#178608 = CARTESIAN_POINT('',(130.153208,-94.55243,1.585)); +#178609 = LINE('',#178610,#178611); +#178610 = CARTESIAN_POINT('',(130.292992,-94.553871,1.585)); +#178611 = VECTOR('',#178612,1.); +#178612 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#178613 = ORIENTED_EDGE('',*,*,#178614,.T.); +#178614 = EDGE_CURVE('',#178607,#178615,#178617,.T.); +#178615 = VERTEX_POINT('',#178616); +#178616 = CARTESIAN_POINT('',(130.111397,-94.429483,1.585)); +#178617 = CIRCLE('',#178618,7.500015628756E-02); +#178618 = AXIS2_PLACEMENT_3D('',#178619,#178620,#178621); +#178619 = CARTESIAN_POINT('',(130.16784028432,-94.4788710461,1.585)); +#178620 = DIRECTION('',(0.,0.,-1.)); +#178621 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#178622 = ORIENTED_EDGE('',*,*,#178623,.T.); +#178623 = EDGE_CURVE('',#178615,#178624,#178626,.T.); +#178624 = VERTEX_POINT('',#178625); +#178625 = CARTESIAN_POINT('',(130.335891,-94.172919,1.585)); +#178626 = LINE('',#178627,#178628); +#178627 = CARTESIAN_POINT('',(130.111397,-94.429483,1.585)); +#178628 = VECTOR('',#178629,1.); +#178629 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#178630 = ORIENTED_EDGE('',*,*,#178631,.T.); +#178631 = EDGE_CURVE('',#178624,#178454,#178632,.T.); +#178632 = LINE('',#178633,#178634); +#178633 = CARTESIAN_POINT('',(130.335891,-94.172919,1.585)); +#178634 = VECTOR('',#178635,1.); +#178635 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#178636 = PLANE('',#178637); +#178637 = AXIS2_PLACEMENT_3D('',#178638,#178639,#178640); +#178638 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178639 = DIRECTION('',(0.,0.,1.)); +#178640 = DIRECTION('',(1.,0.,-0.)); +#178641 = SHELL_BASED_SURFACE_MODEL('',(#178642)); +#178642 = OPEN_SHELL('',(#178643)); +#178643 = ADVANCED_FACE('',(#178644),#178839,.T.); +#178644 = FACE_BOUND('',#178645,.F.); +#178645 = EDGE_LOOP('',(#178646,#178657,#178665,#178674,#178682,#178690, + #178698,#178706,#178715,#178723,#178732,#178740,#178748,#178756, + #178765,#178773,#178782,#178790,#178799,#178807,#178816,#178824, + #178833)); +#178646 = ORIENTED_EDGE('',*,*,#178647,.T.); +#178647 = EDGE_CURVE('',#178648,#178650,#178652,.T.); +#178648 = VERTEX_POINT('',#178649); +#178649 = CARTESIAN_POINT('',(130.858007,-94.07604,1.585)); +#178650 = VERTEX_POINT('',#178651); +#178651 = CARTESIAN_POINT('',(130.929745,-94.022919,1.585)); +#178652 = CIRCLE('',#178653,7.50033610077E-02); +#178653 = AXIS2_PLACEMENT_3D('',#178654,#178655,#178656); +#178654 = CARTESIAN_POINT('',(130.9297472707,-94.09792236097,1.585)); +#178655 = DIRECTION('',(0.,0.,-1.)); +#178656 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#178657 = ORIENTED_EDGE('',*,*,#178658,.T.); +#178658 = EDGE_CURVE('',#178650,#178659,#178661,.T.); +#178659 = VERTEX_POINT('',#178660); +#178660 = CARTESIAN_POINT('',(131.420567,-94.02436,1.585)); +#178661 = LINE('',#178662,#178663); +#178662 = CARTESIAN_POINT('',(130.929745,-94.022919,1.585)); +#178663 = VECTOR('',#178664,1.); +#178664 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#178665 = ORIENTED_EDGE('',*,*,#178666,.T.); +#178666 = EDGE_CURVE('',#178659,#178667,#178669,.T.); +#178667 = VERTEX_POINT('',#178668); +#178668 = CARTESIAN_POINT('',(131.405935,-94.172919,1.585)); +#178669 = CIRCLE('',#178670,7.500006711464E-02); +#178670 = AXIS2_PLACEMENT_3D('',#178671,#178672,#178673); +#178671 = CARTESIAN_POINT('',(131.40593506711,-94.09791893288,1.585)); +#178672 = DIRECTION('',(0.,0.,-1.)); +#178673 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#178674 = ORIENTED_EDGE('',*,*,#178675,.T.); +#178675 = EDGE_CURVE('',#178667,#178676,#178678,.T.); +#178676 = VERTEX_POINT('',#178677); +#178677 = CARTESIAN_POINT('',(130.997619,-94.172919,1.585)); +#178678 = LINE('',#178679,#178680); +#178679 = CARTESIAN_POINT('',(131.405935,-94.172919,1.585)); +#178680 = VECTOR('',#178681,1.); +#178681 = DIRECTION('',(-1.,0.,0.)); +#178682 = ORIENTED_EDGE('',*,*,#178683,.T.); +#178683 = EDGE_CURVE('',#178676,#178684,#178686,.T.); +#178684 = VERTEX_POINT('',#178685); +#178685 = CARTESIAN_POINT('',(130.9728,-94.421109,1.585)); +#178686 = LINE('',#178687,#178688); +#178687 = CARTESIAN_POINT('',(130.997619,-94.172919,1.585)); +#178688 = VECTOR('',#178689,1.); +#178689 = DIRECTION('',(-9.950371902091E-02,-0.99503719021,0.)); +#178690 = ORIENTED_EDGE('',*,*,#178691,.T.); +#178691 = EDGE_CURVE('',#178684,#178692,#178694,.T.); +#178692 = VERTEX_POINT('',#178693); +#178693 = CARTESIAN_POINT('',(131.010351,-94.405312,1.585)); +#178694 = LINE('',#178695,#178696); +#178695 = CARTESIAN_POINT('',(130.9728,-94.421109,1.585)); +#178696 = VECTOR('',#178697,1.); +#178697 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#178698 = ORIENTED_EDGE('',*,*,#178699,.T.); +#178699 = EDGE_CURVE('',#178692,#178700,#178702,.T.); +#178700 = VERTEX_POINT('',#178701); +#178701 = CARTESIAN_POINT('',(131.282887,-94.406534,1.585)); +#178702 = LINE('',#178703,#178704); +#178703 = CARTESIAN_POINT('',(131.010351,-94.405312,1.585)); +#178704 = VECTOR('',#178705,1.); +#178705 = DIRECTION('',(0.99998994787,-4.48376624114E-03,0.)); +#178706 = ORIENTED_EDGE('',*,*,#178707,.T.); +#178707 = EDGE_CURVE('',#178700,#178708,#178710,.T.); +#178708 = VERTEX_POINT('',#178709); +#178709 = CARTESIAN_POINT('',(131.527113,-94.654715,1.585)); +#178710 = CIRCLE('',#178711,0.348625649748); +#178711 = AXIS2_PLACEMENT_3D('',#178712,#178713,#178714); +#178712 = CARTESIAN_POINT('',(131.18971504586,-94.74247868387,1.585)); +#178713 = DIRECTION('',(0.,0.,-1.)); +#178714 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#178715 = ORIENTED_EDGE('',*,*,#178716,.T.); +#178716 = EDGE_CURVE('',#178708,#178717,#178719,.T.); +#178717 = VERTEX_POINT('',#178718); +#178718 = CARTESIAN_POINT('',(131.525891,-94.927252,1.585)); +#178719 = LINE('',#178720,#178721); +#178720 = CARTESIAN_POINT('',(131.527113,-94.654715,1.585)); +#178721 = VECTOR('',#178722,1.); +#178722 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#178723 = ORIENTED_EDGE('',*,*,#178724,.T.); +#178724 = EDGE_CURVE('',#178717,#178725,#178727,.T.); +#178725 = VERTEX_POINT('',#178726); +#178726 = CARTESIAN_POINT('',(131.27771,-95.171478,1.585)); +#178727 = CIRCLE('',#178728,0.348635327447); +#178728 = AXIS2_PLACEMENT_3D('',#178729,#178730,#178731); +#178729 = CARTESIAN_POINT('',(131.18993848129,-94.83407208415,1.585)); +#178730 = DIRECTION('',(0.,0.,-1.)); +#178731 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#178732 = ORIENTED_EDGE('',*,*,#178733,.T.); +#178733 = EDGE_CURVE('',#178725,#178734,#178736,.T.); +#178734 = VERTEX_POINT('',#178735); +#178735 = CARTESIAN_POINT('',(131.005173,-95.170256,1.585)); +#178736 = LINE('',#178737,#178738); +#178737 = CARTESIAN_POINT('',(131.27771,-95.171478,1.585)); +#178738 = VECTOR('',#178739,1.); +#178739 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#178740 = ORIENTED_EDGE('',*,*,#178741,.T.); +#178741 = EDGE_CURVE('',#178734,#178742,#178744,.T.); +#178742 = VERTEX_POINT('',#178743); +#178743 = CARTESIAN_POINT('',(130.88246,-95.10805,1.585)); +#178744 = LINE('',#178745,#178746); +#178745 = CARTESIAN_POINT('',(131.005173,-95.170256,1.585)); +#178746 = VECTOR('',#178747,1.); +#178747 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#178748 = ORIENTED_EDGE('',*,*,#178749,.T.); +#178749 = EDGE_CURVE('',#178742,#178750,#178752,.T.); +#178750 = VERTEX_POINT('',#178751); +#178751 = CARTESIAN_POINT('',(130.819765,-95.044347,1.585)); +#178752 = LINE('',#178753,#178754); +#178753 = CARTESIAN_POINT('',(130.88246,-95.10805,1.585)); +#178754 = VECTOR('',#178755,1.); +#178755 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#178756 = ORIENTED_EDGE('',*,*,#178757,.T.); +#178757 = EDGE_CURVE('',#178750,#178758,#178760,.T.); +#178758 = VERTEX_POINT('',#178759); +#178759 = CARTESIAN_POINT('',(130.93516,-94.949648,1.585)); +#178760 = CIRCLE('',#178761,7.50001266804E-02); +#178761 = AXIS2_PLACEMENT_3D('',#178762,#178763,#178764); +#178762 = CARTESIAN_POINT('',(130.88212605199,-95.00268024831,1.585)); +#178763 = DIRECTION('',(0.,0.,-1.)); +#178764 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#178765 = ORIENTED_EDGE('',*,*,#178766,.T.); +#178766 = EDGE_CURVE('',#178758,#178767,#178769,.T.); +#178767 = VERTEX_POINT('',#178768); +#178768 = CARTESIAN_POINT('',(130.974172,-94.988661,1.585)); +#178769 = LINE('',#178770,#178771); +#178770 = CARTESIAN_POINT('',(130.93516,-94.949648,1.585)); +#178771 = VECTOR('',#178772,1.); +#178772 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#178773 = ORIENTED_EDGE('',*,*,#178774,.T.); +#178774 = EDGE_CURVE('',#178767,#178775,#178777,.T.); +#178775 = VERTEX_POINT('',#178776); +#178776 = CARTESIAN_POINT('',(131.313888,-94.988661,1.585)); +#178777 = CIRCLE('',#178778,0.305620374329); +#178778 = AXIS2_PLACEMENT_3D('',#178779,#178780,#178781); +#178779 = CARTESIAN_POINT('',(131.14403,-94.73459,1.585)); +#178780 = DIRECTION('',(0.,0.,1.)); +#178781 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#178782 = ORIENTED_EDGE('',*,*,#178783,.T.); +#178783 = EDGE_CURVE('',#178775,#178784,#178786,.T.); +#178784 = VERTEX_POINT('',#178785); +#178785 = CARTESIAN_POINT('',(131.344295,-94.958253,1.585)); +#178786 = LINE('',#178787,#178788); +#178787 = CARTESIAN_POINT('',(131.313888,-94.988661,1.585)); +#178788 = VECTOR('',#178789,1.); +#178789 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#178790 = ORIENTED_EDGE('',*,*,#178791,.T.); +#178791 = EDGE_CURVE('',#178784,#178792,#178794,.T.); +#178792 = VERTEX_POINT('',#178793); +#178793 = CARTESIAN_POINT('',(131.344296,-94.618536,1.585)); +#178794 = CIRCLE('',#178795,0.305616146029); +#178795 = AXIS2_PLACEMENT_3D('',#178796,#178797,#178798); +#178796 = CARTESIAN_POINT('',(131.09022992049,-94.78839375212,1.585)); +#178797 = DIRECTION('',(0.,-0.,1.)); +#178798 = DIRECTION('',(0.83132086707,-0.555792781505,-0.)); +#178799 = ORIENTED_EDGE('',*,*,#178800,.T.); +#178800 = EDGE_CURVE('',#178792,#178801,#178803,.T.); +#178801 = VERTEX_POINT('',#178802); +#178802 = CARTESIAN_POINT('',(131.313889,-94.588129,1.585)); +#178803 = LINE('',#178804,#178805); +#178804 = CARTESIAN_POINT('',(131.344296,-94.618536,1.585)); +#178805 = VECTOR('',#178806,1.); +#178806 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#178807 = ORIENTED_EDGE('',*,*,#178808,.T.); +#178808 = EDGE_CURVE('',#178801,#178809,#178811,.T.); +#178809 = VERTEX_POINT('',#178810); +#178810 = CARTESIAN_POINT('',(130.974172,-94.588129,1.585)); +#178811 = CIRCLE('',#178812,0.305621483548); +#178812 = AXIS2_PLACEMENT_3D('',#178813,#178814,#178815); +#178813 = CARTESIAN_POINT('',(131.1440305,-94.842201,1.585)); +#178814 = DIRECTION('',(0.,0.,1.)); +#178815 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#178816 = ORIENTED_EDGE('',*,*,#178817,.T.); +#178817 = EDGE_CURVE('',#178809,#178818,#178820,.T.); +#178818 = VERTEX_POINT('',#178819); +#178819 = CARTESIAN_POINT('',(130.917382,-94.640306,1.585)); +#178820 = LINE('',#178821,#178822); +#178821 = CARTESIAN_POINT('',(130.974172,-94.588129,1.585)); +#178822 = VECTOR('',#178823,1.); +#178823 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#178824 = ORIENTED_EDGE('',*,*,#178825,.T.); +#178825 = EDGE_CURVE('',#178818,#178826,#178828,.T.); +#178826 = VERTEX_POINT('',#178827); +#178827 = CARTESIAN_POINT('',(130.807476,-94.581349,1.585)); +#178828 = CIRCLE('',#178829,7.500024172469E-02); +#178829 = AXIS2_PLACEMENT_3D('',#178830,#178831,#178832); +#178830 = CARTESIAN_POINT('',(130.88212597002,-94.57410895619,1.585)); +#178831 = DIRECTION('',(-0.,0.,-1.)); +#178832 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#178833 = ORIENTED_EDGE('',*,*,#178834,.T.); +#178834 = EDGE_CURVE('',#178826,#178648,#178835,.T.); +#178835 = LINE('',#178836,#178837); +#178836 = CARTESIAN_POINT('',(130.807476,-94.581349,1.585)); +#178837 = VECTOR('',#178838,1.); +#178838 = DIRECTION('',(9.950391398786E-02,0.995037170713,0.)); +#178839 = PLANE('',#178840); +#178840 = AXIS2_PLACEMENT_3D('',#178841,#178842,#178843); +#178841 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178842 = DIRECTION('',(0.,0.,1.)); +#178843 = DIRECTION('',(1.,0.,-0.)); +#178844 = SHELL_BASED_SURFACE_MODEL('',(#178845)); +#178845 = OPEN_SHELL('',(#178846)); +#178846 = ADVANCED_FACE('',(#178847,#178958),#179017,.T.); +#178847 = FACE_BOUND('',#178848,.F.); +#178848 = EDGE_LOOP('',(#178849,#178859,#178868,#178876,#178884,#178892, + #178901,#178909,#178918,#178926,#178935,#178943,#178952)); +#178849 = ORIENTED_EDGE('',*,*,#178850,.T.); +#178850 = EDGE_CURVE('',#178851,#178853,#178855,.T.); +#178851 = VERTEX_POINT('',#178852); +#178852 = CARTESIAN_POINT('',(91.753518,-94.632217,1.585)); +#178853 = VERTEX_POINT('',#178854); +#178854 = CARTESIAN_POINT('',(92.124623,-94.374204,1.585)); +#178855 = LINE('',#178856,#178857); +#178856 = CARTESIAN_POINT('',(91.753518,-94.632217,1.585)); +#178857 = VECTOR('',#178858,1.); +#178858 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#178859 = ORIENTED_EDGE('',*,*,#178860,.T.); +#178860 = EDGE_CURVE('',#178853,#178861,#178863,.T.); +#178861 = VERTEX_POINT('',#178862); +#178862 = CARTESIAN_POINT('',(92.197829,-94.504299,1.585)); +#178863 = CIRCLE('',#178864,7.500005951702E-02); +#178864 = AXIS2_PLACEMENT_3D('',#178865,#178866,#178867); +#178865 = CARTESIAN_POINT('',(92.154818747396,-94.44285693705,1.585)); +#178866 = DIRECTION('',(0.,0.,-1.)); +#178867 = DIRECTION('',(-0.402609645791,0.915371767707,-0.)); +#178868 = ORIENTED_EDGE('',*,*,#178869,.T.); +#178869 = EDGE_CURVE('',#178861,#178870,#178872,.T.); +#178870 = VERTEX_POINT('',#178871); +#178871 = CARTESIAN_POINT('',(91.753628,-94.815239,1.585)); +#178872 = LINE('',#178873,#178874); +#178873 = CARTESIAN_POINT('',(92.197829,-94.504299,1.585)); +#178874 = VECTOR('',#178875,1.); +#178875 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#178876 = ORIENTED_EDGE('',*,*,#178877,.T.); +#178877 = EDGE_CURVE('',#178870,#178878,#178880,.T.); +#178878 = VERTEX_POINT('',#178879); +#178879 = CARTESIAN_POINT('',(91.753628,-94.939285,1.585)); +#178880 = LINE('',#178881,#178882); +#178881 = CARTESIAN_POINT('',(91.753628,-94.815239,1.585)); +#178882 = VECTOR('',#178883,1.); +#178883 = DIRECTION('',(0.,-1.,0.)); +#178884 = ORIENTED_EDGE('',*,*,#178885,.T.); +#178885 = EDGE_CURVE('',#178878,#178886,#178888,.T.); +#178886 = VERTEX_POINT('',#178887); +#178887 = CARTESIAN_POINT('',(92.169451,-94.940726,1.585)); +#178888 = LINE('',#178889,#178890); +#178889 = CARTESIAN_POINT('',(91.753628,-94.939285,1.585)); +#178890 = VECTOR('',#178891,1.); +#178891 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#178892 = ORIENTED_EDGE('',*,*,#178893,.T.); +#178893 = EDGE_CURVE('',#178886,#178894,#178896,.T.); +#178894 = VERTEX_POINT('',#178895); +#178895 = CARTESIAN_POINT('',(92.154819,-95.089285,1.585)); +#178896 = CIRCLE('',#178897,7.500006711464E-02); +#178897 = AXIS2_PLACEMENT_3D('',#178898,#178899,#178900); +#178898 = CARTESIAN_POINT('',(92.154819067115,-95.01428493288,1.585)); +#178899 = DIRECTION('',(0.,0.,-1.)); +#178900 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#178901 = ORIENTED_EDGE('',*,*,#178902,.T.); +#178902 = EDGE_CURVE('',#178894,#178903,#178905,.T.); +#178903 = VERTEX_POINT('',#178904); +#178904 = CARTESIAN_POINT('',(91.140187,-95.087844,1.585)); +#178905 = LINE('',#178906,#178907); +#178906 = CARTESIAN_POINT('',(92.154819,-95.089285,1.585)); +#178907 = VECTOR('',#178908,1.); +#178908 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#178909 = ORIENTED_EDGE('',*,*,#178910,.T.); +#178910 = EDGE_CURVE('',#178903,#178911,#178913,.T.); +#178911 = VERTEX_POINT('',#178912); +#178912 = CARTESIAN_POINT('',(91.079819,-95.014285,1.585)); +#178913 = CIRCLE('',#178914,7.500074938986E-02); +#178914 = AXIS2_PLACEMENT_3D('',#178915,#178916,#178917); +#178915 = CARTESIAN_POINT('',(91.154819749388,-95.01428453389,1.585)); +#178916 = DIRECTION('',(0.,0.,-1.)); +#178917 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#178918 = ORIENTED_EDGE('',*,*,#178919,.T.); +#178919 = EDGE_CURVE('',#178911,#178920,#178922,.T.); +#178920 = VERTEX_POINT('',#178921); +#178921 = CARTESIAN_POINT('',(91.082482,-94.613524,1.585)); +#178922 = LINE('',#178923,#178924); +#178923 = CARTESIAN_POINT('',(91.079819,-95.014285,1.585)); +#178924 = VECTOR('',#178925,1.); +#178925 = DIRECTION('',(6.644711463211E-03,0.999977923661,0.)); +#178926 = ORIENTED_EDGE('',*,*,#178927,.T.); +#178927 = EDGE_CURVE('',#178920,#178928,#178930,.T.); +#178928 = VERTEX_POINT('',#178929); +#178929 = CARTESIAN_POINT('',(91.330663,-94.369298,1.585)); +#178930 = CIRCLE('',#178931,0.3486213829); +#178931 = AXIS2_PLACEMENT_3D('',#178932,#178933,#178934); +#178932 = CARTESIAN_POINT('',(91.418423229516,-94.70669244383,1.585)); +#178933 = DIRECTION('',(0.,0.,-1.)); +#178934 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#178935 = ORIENTED_EDGE('',*,*,#178936,.T.); +#178936 = EDGE_CURVE('',#178928,#178937,#178939,.T.); +#178937 = VERTEX_POINT('',#178938); +#178938 = CARTESIAN_POINT('',(91.502784,-94.369298,1.585)); +#178939 = LINE('',#178940,#178941); +#178940 = CARTESIAN_POINT('',(91.330663,-94.369298,1.585)); +#178941 = VECTOR('',#178942,1.); +#178942 = DIRECTION('',(1.,0.,0.)); +#178943 = ORIENTED_EDGE('',*,*,#178944,.T.); +#178944 = EDGE_CURVE('',#178937,#178945,#178947,.T.); +#178945 = VERTEX_POINT('',#178946); +#178946 = CARTESIAN_POINT('',(91.752187,-94.618701,1.585)); +#178947 = CIRCLE('',#178948,0.347870264855); +#178948 = AXIS2_PLACEMENT_3D('',#178949,#178950,#178951); +#178949 = CARTESIAN_POINT('',(91.415456265028,-94.70602873497,1.585)); +#178950 = DIRECTION('',(0.,0.,-1.)); +#178951 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#178952 = ORIENTED_EDGE('',*,*,#178953,.T.); +#178953 = EDGE_CURVE('',#178945,#178851,#178954,.T.); +#178954 = LINE('',#178955,#178956); +#178955 = CARTESIAN_POINT('',(91.752187,-94.618701,1.585)); +#178956 = VECTOR('',#178957,1.); +#178957 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#178958 = FACE_BOUND('',#178959,.F.); +#178959 = EDGE_LOOP('',(#178960,#178971,#178979,#178987,#178995,#179003, + #179011)); +#178960 = ORIENTED_EDGE('',*,*,#178961,.T.); +#178961 = EDGE_CURVE('',#178962,#178964,#178966,.T.); +#178962 = VERTEX_POINT('',#178963); +#178963 = CARTESIAN_POINT('',(91.538963,-94.552115,1.585)); +#178964 = VERTEX_POINT('',#178965); +#178965 = CARTESIAN_POINT('',(91.264077,-94.582522,1.585)); +#178966 = CIRCLE('',#178967,0.198386215365); +#178967 = AXIS2_PLACEMENT_3D('',#178968,#178969,#178970); +#178968 = CARTESIAN_POINT('',(91.417159957837,-94.7087071753,1.585)); +#178969 = DIRECTION('',(0.,0.,1.)); +#178970 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#178971 = ORIENTED_EDGE('',*,*,#178972,.T.); +#178972 = EDGE_CURVE('',#178964,#178973,#178975,.T.); +#178973 = VERTEX_POINT('',#178974); +#178974 = CARTESIAN_POINT('',(91.229819,-94.651038,1.585)); +#178975 = LINE('',#178976,#178977); +#178976 = CARTESIAN_POINT('',(91.264077,-94.582522,1.585)); +#178977 = VECTOR('',#178978,1.); +#178978 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#178979 = ORIENTED_EDGE('',*,*,#178980,.T.); +#178980 = EDGE_CURVE('',#178973,#178981,#178983,.T.); +#178981 = VERTEX_POINT('',#178982); +#178982 = CARTESIAN_POINT('',(91.229819,-94.939285,1.585)); +#178983 = LINE('',#178984,#178985); +#178984 = CARTESIAN_POINT('',(91.229819,-94.651038,1.585)); +#178985 = VECTOR('',#178986,1.); +#178986 = DIRECTION('',(0.,-1.,0.)); +#178987 = ORIENTED_EDGE('',*,*,#178988,.T.); +#178988 = EDGE_CURVE('',#178981,#178989,#178991,.T.); +#178989 = VERTEX_POINT('',#178990); +#178990 = CARTESIAN_POINT('',(91.603628,-94.939285,1.585)); +#178991 = LINE('',#178992,#178993); +#178992 = CARTESIAN_POINT('',(91.229819,-94.939285,1.585)); +#178993 = VECTOR('',#178994,1.); +#178994 = DIRECTION('',(1.,0.,0.)); +#178995 = ORIENTED_EDGE('',*,*,#178996,.T.); +#178996 = EDGE_CURVE('',#178989,#178997,#178999,.T.); +#178997 = VERTEX_POINT('',#178998); +#178998 = CARTESIAN_POINT('',(91.603628,-94.651038,1.585)); +#178999 = LINE('',#179000,#179001); +#179000 = CARTESIAN_POINT('',(91.603628,-94.939285,1.585)); +#179001 = VECTOR('',#179002,1.); +#179002 = DIRECTION('',(0.,1.,0.)); +#179003 = ORIENTED_EDGE('',*,*,#179004,.T.); +#179004 = EDGE_CURVE('',#178997,#179005,#179007,.T.); +#179005 = VERTEX_POINT('',#179006); +#179006 = CARTESIAN_POINT('',(91.56937,-94.582522,1.585)); +#179007 = LINE('',#179008,#179009); +#179008 = CARTESIAN_POINT('',(91.603628,-94.651038,1.585)); +#179009 = VECTOR('',#179010,1.); +#179010 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#179011 = ORIENTED_EDGE('',*,*,#179012,.T.); +#179012 = EDGE_CURVE('',#179005,#178962,#179013,.T.); +#179013 = LINE('',#179014,#179015); +#179014 = CARTESIAN_POINT('',(91.56937,-94.582522,1.585)); +#179015 = VECTOR('',#179016,1.); +#179016 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#179017 = PLANE('',#179018); +#179018 = AXIS2_PLACEMENT_3D('',#179019,#179020,#179021); +#179019 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179020 = DIRECTION('',(0.,0.,1.)); +#179021 = DIRECTION('',(1.,0.,-0.)); +#179022 = SHELL_BASED_SURFACE_MODEL('',(#179023)); +#179023 = OPEN_SHELL('',(#179024)); +#179024 = ADVANCED_FACE('',(#179025),#179061,.T.); +#179025 = FACE_BOUND('',#179026,.F.); +#179026 = EDGE_LOOP('',(#179027,#179038,#179046,#179055)); +#179027 = ORIENTED_EDGE('',*,*,#179028,.T.); +#179028 = EDGE_CURVE('',#179029,#179031,#179033,.T.); +#179029 = VERTEX_POINT('',#179030); +#179030 = CARTESIAN_POINT('',(93.954392,-94.9056,1.585)); +#179031 = VERTEX_POINT('',#179032); +#179032 = CARTESIAN_POINT('',(93.954392,-94.7856,1.585)); +#179033 = CIRCLE('',#179034,6.000000000043E-02); +#179034 = AXIS2_PLACEMENT_3D('',#179035,#179036,#179037); +#179035 = CARTESIAN_POINT('',(93.954391774412,-94.8456,1.585)); +#179036 = DIRECTION('',(0.,0.,-1.)); +#179037 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#179038 = ORIENTED_EDGE('',*,*,#179039,.T.); +#179039 = EDGE_CURVE('',#179031,#179040,#179042,.T.); +#179040 = VERTEX_POINT('',#179041); +#179041 = CARTESIAN_POINT('',(94.428908,-94.7856,1.585)); +#179042 = LINE('',#179043,#179044); +#179043 = CARTESIAN_POINT('',(93.954392,-94.7856,1.585)); +#179044 = VECTOR('',#179045,1.); +#179045 = DIRECTION('',(1.,0.,0.)); +#179046 = ORIENTED_EDGE('',*,*,#179047,.T.); +#179047 = EDGE_CURVE('',#179040,#179048,#179050,.T.); +#179048 = VERTEX_POINT('',#179049); +#179049 = CARTESIAN_POINT('',(94.428908,-94.9056,1.585)); +#179050 = CIRCLE('',#179051,6.000000000043E-02); +#179051 = AXIS2_PLACEMENT_3D('',#179052,#179053,#179054); +#179052 = CARTESIAN_POINT('',(94.428908225588,-94.8456,1.585)); +#179053 = DIRECTION('',(0.,0.,-1.)); +#179054 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#179055 = ORIENTED_EDGE('',*,*,#179056,.T.); +#179056 = EDGE_CURVE('',#179048,#179029,#179057,.T.); +#179057 = LINE('',#179058,#179059); +#179058 = CARTESIAN_POINT('',(94.428908,-94.9056,1.585)); +#179059 = VECTOR('',#179060,1.); +#179060 = DIRECTION('',(-1.,0.,0.)); +#179061 = PLANE('',#179062); +#179062 = AXIS2_PLACEMENT_3D('',#179063,#179064,#179065); +#179063 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179064 = DIRECTION('',(0.,0.,1.)); +#179065 = DIRECTION('',(1.,0.,-0.)); +#179066 = SHELL_BASED_SURFACE_MODEL('',(#179067)); +#179067 = OPEN_SHELL('',(#179068)); +#179068 = ADVANCED_FACE('',(#179069),#179105,.T.); +#179069 = FACE_BOUND('',#179070,.F.); +#179070 = EDGE_LOOP('',(#179071,#179082,#179090,#179099)); +#179071 = ORIENTED_EDGE('',*,*,#179072,.T.); +#179072 = EDGE_CURVE('',#179073,#179075,#179077,.T.); +#179073 = VERTEX_POINT('',#179074); +#179074 = CARTESIAN_POINT('',(98.954392,-94.9056,1.585)); +#179075 = VERTEX_POINT('',#179076); +#179076 = CARTESIAN_POINT('',(98.954392,-94.7856,1.585)); +#179077 = CIRCLE('',#179078,6.000000000043E-02); +#179078 = AXIS2_PLACEMENT_3D('',#179079,#179080,#179081); +#179079 = CARTESIAN_POINT('',(98.954391774412,-94.8456,1.585)); +#179080 = DIRECTION('',(0.,0.,-1.)); +#179081 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#179082 = ORIENTED_EDGE('',*,*,#179083,.T.); +#179083 = EDGE_CURVE('',#179075,#179084,#179086,.T.); +#179084 = VERTEX_POINT('',#179085); +#179085 = CARTESIAN_POINT('',(99.428908,-94.7856,1.585)); +#179086 = LINE('',#179087,#179088); +#179087 = CARTESIAN_POINT('',(98.954392,-94.7856,1.585)); +#179088 = VECTOR('',#179089,1.); +#179089 = DIRECTION('',(1.,0.,0.)); +#179090 = ORIENTED_EDGE('',*,*,#179091,.T.); +#179091 = EDGE_CURVE('',#179084,#179092,#179094,.T.); +#179092 = VERTEX_POINT('',#179093); +#179093 = CARTESIAN_POINT('',(99.428908,-94.9056,1.585)); +#179094 = CIRCLE('',#179095,6.000000000043E-02); +#179095 = AXIS2_PLACEMENT_3D('',#179096,#179097,#179098); +#179096 = CARTESIAN_POINT('',(99.428908225588,-94.8456,1.585)); +#179097 = DIRECTION('',(0.,0.,-1.)); +#179098 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#179099 = ORIENTED_EDGE('',*,*,#179100,.T.); +#179100 = EDGE_CURVE('',#179092,#179073,#179101,.T.); +#179101 = LINE('',#179102,#179103); +#179102 = CARTESIAN_POINT('',(99.428908,-94.9056,1.585)); +#179103 = VECTOR('',#179104,1.); +#179104 = DIRECTION('',(-1.,0.,0.)); +#179105 = PLANE('',#179106); +#179106 = AXIS2_PLACEMENT_3D('',#179107,#179108,#179109); +#179107 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179108 = DIRECTION('',(0.,0.,1.)); +#179109 = DIRECTION('',(1.,0.,-0.)); +#179110 = SHELL_BASED_SURFACE_MODEL('',(#179111)); +#179111 = OPEN_SHELL('',(#179112)); +#179112 = ADVANCED_FACE('',(#179113),#179149,.T.); +#179113 = FACE_BOUND('',#179114,.F.); +#179114 = EDGE_LOOP('',(#179115,#179126,#179134,#179143)); +#179115 = ORIENTED_EDGE('',*,*,#179116,.T.); +#179116 = EDGE_CURVE('',#179117,#179119,#179121,.T.); +#179117 = VERTEX_POINT('',#179118); +#179118 = CARTESIAN_POINT('',(134.629392,-94.8606,1.585)); +#179119 = VERTEX_POINT('',#179120); +#179120 = CARTESIAN_POINT('',(134.629392,-94.7406,1.585)); +#179121 = CIRCLE('',#179122,6.000000000043E-02); +#179122 = AXIS2_PLACEMENT_3D('',#179123,#179124,#179125); +#179123 = CARTESIAN_POINT('',(134.62939177441,-94.8006,1.585)); +#179124 = DIRECTION('',(0.,0.,-1.)); +#179125 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#179126 = ORIENTED_EDGE('',*,*,#179127,.T.); +#179127 = EDGE_CURVE('',#179119,#179128,#179130,.T.); +#179128 = VERTEX_POINT('',#179129); +#179129 = CARTESIAN_POINT('',(135.103908,-94.7406,1.585)); +#179130 = LINE('',#179131,#179132); +#179131 = CARTESIAN_POINT('',(134.629392,-94.7406,1.585)); +#179132 = VECTOR('',#179133,1.); +#179133 = DIRECTION('',(1.,0.,0.)); +#179134 = ORIENTED_EDGE('',*,*,#179135,.T.); +#179135 = EDGE_CURVE('',#179128,#179136,#179138,.T.); +#179136 = VERTEX_POINT('',#179137); +#179137 = CARTESIAN_POINT('',(135.103908,-94.8606,1.585)); +#179138 = CIRCLE('',#179139,6.000000000043E-02); +#179139 = AXIS2_PLACEMENT_3D('',#179140,#179141,#179142); +#179140 = CARTESIAN_POINT('',(135.10390822558,-94.8006,1.585)); +#179141 = DIRECTION('',(0.,0.,-1.)); +#179142 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#179143 = ORIENTED_EDGE('',*,*,#179144,.T.); +#179144 = EDGE_CURVE('',#179136,#179117,#179145,.T.); +#179145 = LINE('',#179146,#179147); +#179146 = CARTESIAN_POINT('',(135.103908,-94.8606,1.585)); +#179147 = VECTOR('',#179148,1.); +#179148 = DIRECTION('',(-1.,0.,0.)); +#179149 = PLANE('',#179150); +#179150 = AXIS2_PLACEMENT_3D('',#179151,#179152,#179153); +#179151 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179152 = DIRECTION('',(0.,0.,1.)); +#179153 = DIRECTION('',(1.,0.,-0.)); +#179154 = SHELL_BASED_SURFACE_MODEL('',(#179155)); +#179155 = OPEN_SHELL('',(#179156)); +#179156 = ADVANCED_FACE('',(#179157,#179309),#179377,.T.); +#179157 = FACE_BOUND('',#179158,.F.); +#179158 = EDGE_LOOP('',(#179159,#179170,#179178,#179186,#179194,#179203, + #179211,#179219,#179228,#179236,#179245,#179253,#179261,#179269, + #179278,#179286,#179295,#179303)); +#179159 = ORIENTED_EDGE('',*,*,#179160,.T.); +#179160 = EDGE_CURVE('',#179161,#179163,#179165,.T.); +#179161 = VERTEX_POINT('',#179162); +#179162 = CARTESIAN_POINT('',(96.47932,-94.085672,1.585)); +#179163 = VERTEX_POINT('',#179164); +#179164 = CARTESIAN_POINT('',(96.475792,-93.998808,1.585)); +#179165 = CIRCLE('',#179166,7.226649079677E-02); +#179166 = AXIS2_PLACEMENT_3D('',#179167,#179168,#179169); +#179167 = CARTESIAN_POINT('',(96.535240541535,-94.03989712996,1.585)); +#179168 = DIRECTION('',(0.,0.,-1.)); +#179169 = DIRECTION('',(-0.773810114734,-0.633417639741,-0.)); +#179170 = ORIENTED_EDGE('',*,*,#179171,.T.); +#179171 = EDGE_CURVE('',#179163,#179172,#179174,.T.); +#179172 = VERTEX_POINT('',#179173); +#179173 = CARTESIAN_POINT('',(96.496484,-93.978116,1.585)); +#179174 = LINE('',#179175,#179176); +#179175 = CARTESIAN_POINT('',(96.475792,-93.998808,1.585)); +#179176 = VECTOR('',#179177,1.); +#179177 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#179178 = ORIENTED_EDGE('',*,*,#179179,.T.); +#179179 = EDGE_CURVE('',#179172,#179180,#179182,.T.); +#179180 = VERTEX_POINT('',#179181); +#179181 = CARTESIAN_POINT('',(96.538152,-93.965476,1.585)); +#179182 = LINE('',#179183,#179184); +#179183 = CARTESIAN_POINT('',(96.496484,-93.978116,1.585)); +#179184 = VECTOR('',#179185,1.); +#179185 = DIRECTION('',(0.956939376321,0.29028783999,0.)); +#179186 = ORIENTED_EDGE('',*,*,#179187,.T.); +#179187 = EDGE_CURVE('',#179180,#179188,#179190,.T.); +#179188 = VERTEX_POINT('',#179189); +#179189 = CARTESIAN_POINT('',(97.362308,-93.966917,1.585)); +#179190 = LINE('',#179191,#179192); +#179191 = CARTESIAN_POINT('',(96.538152,-93.965476,1.585)); +#179192 = VECTOR('',#179193,1.); +#179193 = DIRECTION('',(0.999998471455,-1.748452716921E-03,0.)); +#179194 = ORIENTED_EDGE('',*,*,#179195,.T.); +#179195 = EDGE_CURVE('',#179188,#179196,#179198,.T.); +#179196 = VERTEX_POINT('',#179197); +#179197 = CARTESIAN_POINT('',(97.611711,-94.21632,1.585)); +#179198 = CIRCLE('',#179199,0.347870264855); +#179199 = AXIS2_PLACEMENT_3D('',#179200,#179201,#179202); +#179200 = CARTESIAN_POINT('',(97.274980265028,-94.30364773497,1.585)); +#179201 = DIRECTION('',(0.,0.,-1.)); +#179202 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#179203 = ORIENTED_EDGE('',*,*,#179204,.T.); +#179204 = EDGE_CURVE('',#179196,#179205,#179207,.T.); +#179205 = VERTEX_POINT('',#179206); +#179206 = CARTESIAN_POINT('',(97.610489,-94.393619,1.585)); +#179207 = LINE('',#179208,#179209); +#179208 = CARTESIAN_POINT('',(97.611711,-94.21632,1.585)); +#179209 = VECTOR('',#179210,1.); +#179210 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#179211 = ORIENTED_EDGE('',*,*,#179212,.T.); +#179212 = EDGE_CURVE('',#179205,#179213,#179215,.T.); +#179213 = VERTEX_POINT('',#179214); +#179214 = CARTESIAN_POINT('',(97.549783,-94.515031,1.585)); +#179215 = LINE('',#179216,#179217); +#179216 = CARTESIAN_POINT('',(97.610489,-94.393619,1.585)); +#179217 = VECTOR('',#179218,1.); +#179218 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#179219 = ORIENTED_EDGE('',*,*,#179220,.T.); +#179220 = EDGE_CURVE('',#179213,#179221,#179223,.T.); +#179221 = VERTEX_POINT('',#179222); +#179222 = CARTESIAN_POINT('',(97.423451,-94.435506,1.585)); +#179223 = CIRCLE('',#179224,7.500029440362E-02); +#179224 = AXIS2_PLACEMENT_3D('',#179225,#179226,#179227); +#179225 = CARTESIAN_POINT('',(97.490533351324,-94.46904705397,1.585)); +#179226 = DIRECTION('',(-0.,0.,-1.)); +#179227 = DIRECTION('',(0.789992214662,-0.613116873665,-0.)); +#179228 = ORIENTED_EDGE('',*,*,#179229,.T.); +#179229 = EDGE_CURVE('',#179221,#179230,#179232,.T.); +#179230 = VERTEX_POINT('',#179231); +#179231 = CARTESIAN_POINT('',(97.463152,-94.356104,1.585)); +#179232 = LINE('',#179233,#179234); +#179233 = CARTESIAN_POINT('',(97.423451,-94.435506,1.585)); +#179234 = VECTOR('',#179235,1.); +#179235 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#179236 = ORIENTED_EDGE('',*,*,#179237,.T.); +#179237 = EDGE_CURVE('',#179230,#179238,#179240,.T.); +#179238 = VERTEX_POINT('',#179239); +#179239 = CARTESIAN_POINT('',(97.398487,-94.149734,1.585)); +#179240 = CIRCLE('',#179241,0.197624884179); +#179241 = AXIS2_PLACEMENT_3D('',#179242,#179243,#179244); +#179242 = CARTESIAN_POINT('',(97.272969507655,-94.3023805,1.585)); +#179243 = DIRECTION('',(0.,-0.,1.)); +#179244 = DIRECTION('',(0.962340816213,-0.271845826618,-0.)); +#179245 = ORIENTED_EDGE('',*,*,#179246,.T.); +#179246 = EDGE_CURVE('',#179238,#179247,#179249,.T.); +#179247 = VERTEX_POINT('',#179248); +#179248 = CARTESIAN_POINT('',(97.329971,-94.115476,1.585)); +#179249 = LINE('',#179250,#179251); +#179250 = CARTESIAN_POINT('',(97.398487,-94.149734,1.585)); +#179251 = VECTOR('',#179252,1.); +#179252 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#179253 = ORIENTED_EDGE('',*,*,#179254,.T.); +#179254 = EDGE_CURVE('',#179247,#179255,#179257,.T.); +#179255 = VERTEX_POINT('',#179256); +#179256 = CARTESIAN_POINT('',(97.277156,-94.115904,1.585)); +#179257 = LINE('',#179258,#179259); +#179258 = CARTESIAN_POINT('',(97.329971,-94.115476,1.585)); +#179259 = VECTOR('',#179260,1.); +#179260 = DIRECTION('',(-0.999967166167,-8.103492324509E-03,0.)); +#179261 = ORIENTED_EDGE('',*,*,#179262,.T.); +#179262 = EDGE_CURVE('',#179255,#179263,#179265,.T.); +#179263 = VERTEX_POINT('',#179264); +#179264 = CARTESIAN_POINT('',(97.277156,-94.346,1.585)); +#179265 = LINE('',#179266,#179267); +#179266 = CARTESIAN_POINT('',(97.277156,-94.115904,1.585)); +#179267 = VECTOR('',#179268,1.); +#179268 = DIRECTION('',(0.,-1.,0.)); +#179269 = ORIENTED_EDGE('',*,*,#179270,.T.); +#179270 = EDGE_CURVE('',#179263,#179271,#179273,.T.); +#179271 = VERTEX_POINT('',#179272); +#179272 = CARTESIAN_POINT('',(97.028974,-94.590225,1.585)); +#179273 = CIRCLE('',#179274,0.348632713765); +#179274 = AXIS2_PLACEMENT_3D('',#179275,#179276,#179277); +#179275 = CARTESIAN_POINT('',(96.941205973942,-94.25282087627,1.585)); +#179276 = DIRECTION('',(0.,0.,-1.)); +#179277 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#179278 = ORIENTED_EDGE('',*,*,#179279,.T.); +#179279 = EDGE_CURVE('',#179271,#179280,#179282,.T.); +#179280 = VERTEX_POINT('',#179281); +#179281 = CARTESIAN_POINT('',(96.708818,-94.589003,1.585)); +#179282 = LINE('',#179283,#179284); +#179283 = CARTESIAN_POINT('',(97.028974,-94.590225,1.585)); +#179284 = VECTOR('',#179285,1.); +#179285 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#179286 = ORIENTED_EDGE('',*,*,#179287,.T.); +#179287 = EDGE_CURVE('',#179280,#179288,#179290,.T.); +#179288 = VERTEX_POINT('',#179289); +#179289 = CARTESIAN_POINT('',(96.464593,-94.340822,1.585)); +#179290 = CIRCLE('',#179291,0.348628078749); +#179291 = AXIS2_PLACEMENT_3D('',#179292,#179293,#179294); +#179292 = CARTESIAN_POINT('',(96.801993030202,-94.25305664857,1.585)); +#179293 = DIRECTION('',(0.,0.,-1.)); +#179294 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#179295 = ORIENTED_EDGE('',*,*,#179296,.T.); +#179296 = EDGE_CURVE('',#179288,#179297,#179299,.T.); +#179297 = VERTEX_POINT('',#179298); +#179298 = CARTESIAN_POINT('',(96.465815,-94.115905,1.585)); +#179299 = LINE('',#179300,#179301); +#179300 = CARTESIAN_POINT('',(96.464593,-94.340822,1.585)); +#179301 = VECTOR('',#179302,1.); +#179302 = DIRECTION('',(5.433035139454E-03,0.999985240956,0.)); +#179303 = ORIENTED_EDGE('',*,*,#179304,.T.); +#179304 = EDGE_CURVE('',#179297,#179161,#179305,.T.); +#179305 = LINE('',#179306,#179307); +#179306 = CARTESIAN_POINT('',(96.465815,-94.115905,1.585)); +#179307 = VECTOR('',#179308,1.); +#179308 = DIRECTION('',(0.407855431141,0.913046519784,0.)); +#179309 = FACE_BOUND('',#179310,.F.); +#179310 = EDGE_LOOP('',(#179311,#179321,#179329,#179337,#179345,#179354, + #179362,#179371)); +#179311 = ORIENTED_EDGE('',*,*,#179312,.T.); +#179312 = EDGE_CURVE('',#179313,#179315,#179317,.T.); +#179313 = VERTEX_POINT('',#179314); +#179314 = CARTESIAN_POINT('',(97.129819,-94.153419,1.585)); +#179315 = VERTEX_POINT('',#179316); +#179316 = CARTESIAN_POINT('',(97.110847,-94.115476,1.585)); +#179317 = LINE('',#179318,#179319); +#179318 = CARTESIAN_POINT('',(97.129819,-94.153419,1.585)); +#179319 = VECTOR('',#179320,1.); +#179320 = DIRECTION('',(-0.447223024592,0.894422476392,0.)); +#179321 = ORIENTED_EDGE('',*,*,#179322,.T.); +#179322 = EDGE_CURVE('',#179315,#179323,#179325,.T.); +#179323 = VERTEX_POINT('',#179324); +#179324 = CARTESIAN_POINT('',(96.632124,-94.115476,1.585)); +#179325 = LINE('',#179326,#179327); +#179326 = CARTESIAN_POINT('',(97.110847,-94.115476,1.585)); +#179327 = VECTOR('',#179328,1.); +#179328 = DIRECTION('',(-1.,0.,0.)); +#179329 = ORIENTED_EDGE('',*,*,#179330,.T.); +#179330 = EDGE_CURVE('',#179323,#179331,#179333,.T.); +#179331 = VERTEX_POINT('',#179332); +#179332 = CARTESIAN_POINT('',(96.613152,-94.153419,1.585)); +#179333 = LINE('',#179334,#179335); +#179334 = CARTESIAN_POINT('',(96.632124,-94.115476,1.585)); +#179335 = VECTOR('',#179336,1.); +#179336 = DIRECTION('',(-0.447223024592,-0.894422476392,0.)); +#179337 = ORIENTED_EDGE('',*,*,#179338,.T.); +#179338 = EDGE_CURVE('',#179331,#179339,#179341,.T.); +#179339 = VERTEX_POINT('',#179340); +#179340 = CARTESIAN_POINT('',(96.613152,-94.308485,1.585)); +#179341 = LINE('',#179342,#179343); +#179342 = CARTESIAN_POINT('',(96.613152,-94.153419,1.585)); +#179343 = VECTOR('',#179344,1.); +#179344 = DIRECTION('',(0.,-1.,0.)); +#179345 = ORIENTED_EDGE('',*,*,#179346,.T.); +#179346 = EDGE_CURVE('',#179339,#179347,#179349,.T.); +#179347 = VERTEX_POINT('',#179348); +#179348 = CARTESIAN_POINT('',(96.746333,-94.441666,1.585)); +#179349 = CIRCLE('',#179350,0.18686440374); +#179350 = AXIS2_PLACEMENT_3D('',#179351,#179352,#179353); +#179351 = CARTESIAN_POINT('',(96.793869,-94.260949,1.585)); +#179352 = DIRECTION('',(0.,0.,1.)); +#179353 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#179354 = ORIENTED_EDGE('',*,*,#179355,.T.); +#179355 = EDGE_CURVE('',#179347,#179356,#179358,.T.); +#179356 = VERTEX_POINT('',#179357); +#179357 = CARTESIAN_POINT('',(96.996637,-94.441666,1.585)); +#179358 = LINE('',#179359,#179360); +#179359 = CARTESIAN_POINT('',(96.746333,-94.441666,1.585)); +#179360 = VECTOR('',#179361,1.); +#179361 = DIRECTION('',(1.,0.,0.)); +#179362 = ORIENTED_EDGE('',*,*,#179363,.T.); +#179363 = EDGE_CURVE('',#179356,#179364,#179366,.T.); +#179364 = VERTEX_POINT('',#179365); +#179365 = CARTESIAN_POINT('',(97.129819,-94.308485,1.585)); +#179366 = CIRCLE('',#179367,0.186872595955); +#179367 = AXIS2_PLACEMENT_3D('',#179368,#179369,#179370); +#179368 = CARTESIAN_POINT('',(96.94909536766,-94.26094201068,1.585)); +#179369 = DIRECTION('',(0.,0.,1.)); +#179370 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#179371 = ORIENTED_EDGE('',*,*,#179372,.T.); +#179372 = EDGE_CURVE('',#179364,#179313,#179373,.T.); +#179373 = LINE('',#179374,#179375); +#179374 = CARTESIAN_POINT('',(97.129819,-94.308485,1.585)); +#179375 = VECTOR('',#179376,1.); +#179376 = DIRECTION('',(0.,1.,0.)); +#179377 = PLANE('',#179378); +#179378 = AXIS2_PLACEMENT_3D('',#179379,#179380,#179381); +#179379 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179380 = DIRECTION('',(0.,0.,1.)); +#179381 = DIRECTION('',(1.,0.,-0.)); +#179382 = SHELL_BASED_SURFACE_MODEL('',(#179383)); +#179383 = OPEN_SHELL('',(#179384)); +#179384 = ADVANCED_FACE('',(#179385,#179573),#179707,.T.); +#179385 = FACE_BOUND('',#179386,.F.); +#179386 = EDGE_LOOP('',(#179387,#179398,#179406,#179414,#179422,#179430, + #179438,#179446,#179454,#179462,#179470,#179479,#179487,#179495, + #179503,#179511,#179519,#179527,#179535,#179543,#179551,#179559, + #179567)); +#179387 = ORIENTED_EDGE('',*,*,#179388,.T.); +#179388 = EDGE_CURVE('',#179389,#179391,#179393,.T.); +#179389 = VERTEX_POINT('',#179390); +#179390 = CARTESIAN_POINT('',(105.485147,-93.362418,1.585)); +#179391 = VERTEX_POINT('',#179392); +#179392 = CARTESIAN_POINT('',(105.953218,-93.367786,1.585)); +#179393 = CIRCLE('',#179394,0.397578964435); +#179394 = AXIS2_PLACEMENT_3D('',#179395,#179396,#179397); +#179395 = CARTESIAN_POINT('',(105.71549697212,-93.68646726061,1.585)); +#179396 = DIRECTION('',(0.,0.,-1.)); +#179397 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#179398 = ORIENTED_EDGE('',*,*,#179399,.T.); +#179399 = EDGE_CURVE('',#179391,#179400,#179402,.T.); +#179400 = VERTEX_POINT('',#179401); +#179401 = CARTESIAN_POINT('',(106.063534,-93.479108,1.585)); +#179402 = LINE('',#179403,#179404); +#179403 = CARTESIAN_POINT('',(105.953218,-93.367786,1.585)); +#179404 = VECTOR('',#179405,1.); +#179405 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#179406 = ORIENTED_EDGE('',*,*,#179407,.T.); +#179407 = EDGE_CURVE('',#179400,#179408,#179410,.T.); +#179408 = VERTEX_POINT('',#179409); +#179409 = CARTESIAN_POINT('',(106.073934,-93.502586,1.585)); +#179410 = LINE('',#179411,#179412); +#179411 = CARTESIAN_POINT('',(106.063534,-93.479108,1.585)); +#179412 = VECTOR('',#179413,1.); +#179413 = DIRECTION('',(0.405010807319,-0.914311897524,0.)); +#179414 = ORIENTED_EDGE('',*,*,#179415,.T.); +#179415 = EDGE_CURVE('',#179408,#179416,#179418,.T.); +#179416 = VERTEX_POINT('',#179417); +#179417 = CARTESIAN_POINT('',(106.123792,-93.711252,1.585)); +#179418 = LINE('',#179419,#179420); +#179419 = CARTESIAN_POINT('',(106.073934,-93.502586,1.585)); +#179420 = VECTOR('',#179421,1.); +#179421 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#179422 = ORIENTED_EDGE('',*,*,#179423,.T.); +#179423 = EDGE_CURVE('',#179416,#179424,#179426,.T.); +#179424 = VERTEX_POINT('',#179425); +#179425 = CARTESIAN_POINT('',(106.121553,-94.062775,1.585)); +#179426 = LINE('',#179427,#179428); +#179427 = CARTESIAN_POINT('',(106.123792,-93.711252,1.585)); +#179428 = VECTOR('',#179429,1.); +#179429 = DIRECTION('',(-6.369297552953E-03,-0.999979715819,0.)); +#179430 = ORIENTED_EDGE('',*,*,#179431,.T.); +#179431 = EDGE_CURVE('',#179424,#179432,#179434,.T.); +#179432 = VERTEX_POINT('',#179433); +#179433 = CARTESIAN_POINT('',(106.068987,-94.267097,1.585)); +#179434 = LINE('',#179435,#179436); +#179435 = CARTESIAN_POINT('',(106.121553,-94.062775,1.585)); +#179436 = VECTOR('',#179437,1.); +#179437 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#179438 = ORIENTED_EDGE('',*,*,#179439,.T.); +#179439 = EDGE_CURVE('',#179432,#179440,#179442,.T.); +#179440 = VERTEX_POINT('',#179441); +#179441 = CARTESIAN_POINT('',(106.054207,-94.288093,1.585)); +#179442 = LINE('',#179443,#179444); +#179443 = CARTESIAN_POINT('',(106.068987,-94.267097,1.585)); +#179444 = VECTOR('',#179445,1.); +#179445 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#179446 = ORIENTED_EDGE('',*,*,#179447,.T.); +#179447 = EDGE_CURVE('',#179440,#179448,#179450,.T.); +#179448 = VERTEX_POINT('',#179449); +#179449 = CARTESIAN_POINT('',(106.012,-94.330299,1.585)); +#179450 = LINE('',#179451,#179452); +#179451 = CARTESIAN_POINT('',(106.054207,-94.288093,1.585)); +#179452 = VECTOR('',#179453,1.); +#179453 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#179454 = ORIENTED_EDGE('',*,*,#179455,.T.); +#179455 = EDGE_CURVE('',#179448,#179456,#179458,.T.); +#179456 = VERTEX_POINT('',#179457); +#179457 = CARTESIAN_POINT('',(106.0456,-94.363899,1.585)); +#179458 = LINE('',#179459,#179460); +#179459 = CARTESIAN_POINT('',(106.012,-94.330299,1.585)); +#179460 = VECTOR('',#179461,1.); +#179461 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#179462 = ORIENTED_EDGE('',*,*,#179463,.T.); +#179463 = EDGE_CURVE('',#179456,#179464,#179466,.T.); +#179464 = VERTEX_POINT('',#179465); +#179465 = CARTESIAN_POINT('',(106.142395,-94.413907,1.585)); +#179466 = LINE('',#179467,#179468); +#179467 = CARTESIAN_POINT('',(106.0456,-94.363899,1.585)); +#179468 = VECTOR('',#179469,1.); +#179469 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#179470 = ORIENTED_EDGE('',*,*,#179471,.T.); +#179471 = EDGE_CURVE('',#179464,#179472,#179474,.T.); +#179472 = VERTEX_POINT('',#179473); +#179473 = CARTESIAN_POINT('',(106.06287,-94.540239,1.585)); +#179474 = CIRCLE('',#179475,7.500029440362E-02); +#179475 = AXIS2_PLACEMENT_3D('',#179476,#179477,#179478); +#179476 = CARTESIAN_POINT('',(106.09641105397,-94.47315664867,1.585)); +#179477 = DIRECTION('',(0.,0.,-1.)); +#179478 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#179479 = ORIENTED_EDGE('',*,*,#179480,.T.); +#179480 = EDGE_CURVE('',#179472,#179481,#179483,.T.); +#179481 = VERTEX_POINT('',#179482); +#179482 = CARTESIAN_POINT('',(105.95389,-94.483291,1.585)); +#179483 = LINE('',#179484,#179485); +#179484 = CARTESIAN_POINT('',(106.06287,-94.540239,1.585)); +#179485 = VECTOR('',#179486,1.); +#179486 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#179487 = ORIENTED_EDGE('',*,*,#179488,.T.); +#179488 = EDGE_CURVE('',#179481,#179489,#179491,.T.); +#179489 = VERTEX_POINT('',#179490); +#179490 = CARTESIAN_POINT('',(105.891126,-94.421557,1.585)); +#179491 = LINE('',#179492,#179493); +#179492 = CARTESIAN_POINT('',(105.95389,-94.483291,1.585)); +#179493 = VECTOR('',#179494,1.); +#179494 = DIRECTION('',(-0.712932436519,0.701232729527,0.)); +#179495 = ORIENTED_EDGE('',*,*,#179496,.T.); +#179496 = EDGE_CURVE('',#179489,#179497,#179499,.T.); +#179497 = VERTEX_POINT('',#179498); +#179498 = CARTESIAN_POINT('',(105.825329,-94.451478,1.585)); +#179499 = LINE('',#179500,#179501); +#179500 = CARTESIAN_POINT('',(105.891126,-94.421557,1.585)); +#179501 = VECTOR('',#179502,1.); +#179502 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#179503 = ORIENTED_EDGE('',*,*,#179504,.T.); +#179504 = EDGE_CURVE('',#179497,#179505,#179507,.T.); +#179505 = VERTEX_POINT('',#179506); +#179506 = CARTESIAN_POINT('',(105.600411,-94.450256,1.585)); +#179507 = LINE('',#179508,#179509); +#179508 = CARTESIAN_POINT('',(105.825329,-94.451478,1.585)); +#179509 = VECTOR('',#179510,1.); +#179510 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#179511 = ORIENTED_EDGE('',*,*,#179512,.T.); +#179512 = EDGE_CURVE('',#179505,#179513,#179515,.T.); +#179513 = VERTEX_POINT('',#179514); +#179514 = CARTESIAN_POINT('',(105.4777,-94.388053,1.585)); +#179515 = LINE('',#179516,#179517); +#179516 = CARTESIAN_POINT('',(105.600411,-94.450256,1.585)); +#179517 = VECTOR('',#179518,1.); +#179518 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#179519 = ORIENTED_EDGE('',*,*,#179520,.T.); +#179520 = EDGE_CURVE('',#179513,#179521,#179523,.T.); +#179521 = VERTEX_POINT('',#179522); +#179522 = CARTESIAN_POINT('',(105.367384,-94.276728,1.585)); +#179523 = LINE('',#179524,#179525); +#179524 = CARTESIAN_POINT('',(105.4777,-94.388053,1.585)); +#179525 = VECTOR('',#179526,1.); +#179526 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#179527 = ORIENTED_EDGE('',*,*,#179528,.T.); +#179528 = EDGE_CURVE('',#179521,#179529,#179531,.T.); +#179529 = VERTEX_POINT('',#179530); +#179530 = CARTESIAN_POINT('',(105.356984,-94.253251,1.585)); +#179531 = LINE('',#179532,#179533); +#179532 = CARTESIAN_POINT('',(105.367384,-94.276728,1.585)); +#179533 = VECTOR('',#179534,1.); +#179534 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#179535 = ORIENTED_EDGE('',*,*,#179536,.T.); +#179536 = EDGE_CURVE('',#179529,#179537,#179539,.T.); +#179537 = VERTEX_POINT('',#179538); +#179538 = CARTESIAN_POINT('',(105.307126,-94.044585,1.585)); +#179539 = LINE('',#179540,#179541); +#179540 = CARTESIAN_POINT('',(105.356984,-94.253251,1.585)); +#179541 = VECTOR('',#179542,1.); +#179542 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#179543 = ORIENTED_EDGE('',*,*,#179544,.T.); +#179544 = EDGE_CURVE('',#179537,#179545,#179547,.T.); +#179545 = VERTEX_POINT('',#179546); +#179546 = CARTESIAN_POINT('',(105.309365,-93.693062,1.585)); +#179547 = LINE('',#179548,#179549); +#179548 = CARTESIAN_POINT('',(105.307126,-94.044585,1.585)); +#179549 = VECTOR('',#179550,1.); +#179550 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#179551 = ORIENTED_EDGE('',*,*,#179552,.T.); +#179552 = EDGE_CURVE('',#179545,#179553,#179555,.T.); +#179553 = VERTEX_POINT('',#179554); +#179554 = CARTESIAN_POINT('',(105.361931,-93.48874,1.585)); +#179555 = LINE('',#179556,#179557); +#179556 = CARTESIAN_POINT('',(105.309365,-93.693062,1.585)); +#179557 = VECTOR('',#179558,1.); +#179558 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#179559 = ORIENTED_EDGE('',*,*,#179560,.T.); +#179560 = EDGE_CURVE('',#179553,#179561,#179563,.T.); +#179561 = VERTEX_POINT('',#179562); +#179562 = CARTESIAN_POINT('',(105.376712,-93.467743,1.585)); +#179563 = LINE('',#179564,#179565); +#179564 = CARTESIAN_POINT('',(105.361931,-93.48874,1.585)); +#179565 = VECTOR('',#179566,1.); +#179566 = DIRECTION('',(0.575632310301,0.817708654313,0.)); +#179567 = ORIENTED_EDGE('',*,*,#179568,.T.); +#179568 = EDGE_CURVE('',#179561,#179389,#179569,.T.); +#179569 = LINE('',#179570,#179571); +#179570 = CARTESIAN_POINT('',(105.376712,-93.467743,1.585)); +#179571 = VECTOR('',#179572,1.); +#179572 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#179573 = FACE_BOUND('',#179574,.F.); +#179574 = EDGE_LOOP('',(#179575,#179586,#179594,#179603,#179611,#179619, + #179627,#179635,#179643,#179651,#179660,#179668,#179676,#179684, + #179692,#179701)); +#179575 = ORIENTED_EDGE('',*,*,#179576,.T.); +#179576 = EDGE_CURVE('',#179577,#179579,#179581,.T.); +#179577 = VERTEX_POINT('',#179578); +#179578 = CARTESIAN_POINT('',(105.861508,-93.487177,1.585)); +#179579 = VERTEX_POINT('',#179580); +#179580 = CARTESIAN_POINT('',(105.56941,-93.487177,1.585)); +#179581 = CIRCLE('',#179582,0.252889603602); +#179582 = AXIS2_PLACEMENT_3D('',#179583,#179584,#179585); +#179583 = CARTESIAN_POINT('',(105.715459,-93.69363,1.585)); +#179584 = DIRECTION('',(0.,0.,1.)); +#179585 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#179586 = ORIENTED_EDGE('',*,*,#179587,.T.); +#179587 = EDGE_CURVE('',#179579,#179588,#179590,.T.); +#179588 = VERTEX_POINT('',#179589); +#179589 = CARTESIAN_POINT('',(105.497467,-93.559119,1.585)); +#179590 = LINE('',#179591,#179592); +#179591 = CARTESIAN_POINT('',(105.56941,-93.487177,1.585)); +#179592 = VECTOR('',#179593,1.); +#179593 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#179594 = ORIENTED_EDGE('',*,*,#179595,.T.); +#179595 = EDGE_CURVE('',#179588,#179596,#179598,.T.); +#179596 = VERTEX_POINT('',#179597); +#179597 = CARTESIAN_POINT('',(105.497467,-94.196717,1.585)); +#179598 = CIRCLE('',#179599,0.985308713638); +#179599 = AXIS2_PLACEMENT_3D('',#179600,#179601,#179602); +#179600 = CARTESIAN_POINT('',(106.4297762077,-93.877918,1.585)); +#179601 = DIRECTION('',(0.,0.,1.)); +#179602 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#179603 = ORIENTED_EDGE('',*,*,#179604,.T.); +#179604 = EDGE_CURVE('',#179596,#179605,#179607,.T.); +#179605 = VERTEX_POINT('',#179606); +#179606 = CARTESIAN_POINT('',(105.56941,-94.268661,1.585)); +#179607 = LINE('',#179608,#179609); +#179608 = CARTESIAN_POINT('',(105.497467,-94.196717,1.585)); +#179609 = VECTOR('',#179610,1.); +#179610 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#179611 = ORIENTED_EDGE('',*,*,#179612,.T.); +#179612 = EDGE_CURVE('',#179605,#179613,#179615,.T.); +#179613 = VERTEX_POINT('',#179614); +#179614 = CARTESIAN_POINT('',(105.637926,-94.302919,1.585)); +#179615 = LINE('',#179616,#179617); +#179616 = CARTESIAN_POINT('',(105.56941,-94.268661,1.585)); +#179617 = VECTOR('',#179618,1.); +#179618 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#179619 = ORIENTED_EDGE('',*,*,#179620,.T.); +#179620 = EDGE_CURVE('',#179613,#179621,#179623,.T.); +#179621 = VERTEX_POINT('',#179622); +#179622 = CARTESIAN_POINT('',(105.772489,-94.302919,1.585)); +#179623 = LINE('',#179624,#179625); +#179624 = CARTESIAN_POINT('',(105.637926,-94.302919,1.585)); +#179625 = VECTOR('',#179626,1.); +#179626 = DIRECTION('',(1.,0.,0.)); +#179627 = ORIENTED_EDGE('',*,*,#179628,.T.); +#179628 = EDGE_CURVE('',#179621,#179629,#179631,.T.); +#179629 = VERTEX_POINT('',#179630); +#179630 = CARTESIAN_POINT('',(105.71865,-94.24908,1.585)); +#179631 = LINE('',#179632,#179633); +#179632 = CARTESIAN_POINT('',(105.772489,-94.302919,1.585)); +#179633 = VECTOR('',#179634,1.); +#179634 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179635 = ORIENTED_EDGE('',*,*,#179636,.T.); +#179636 = EDGE_CURVE('',#179629,#179637,#179639,.T.); +#179637 = VERTEX_POINT('',#179638); +#179638 = CARTESIAN_POINT('',(105.650135,-94.214823,1.585)); +#179639 = LINE('',#179640,#179641); +#179640 = CARTESIAN_POINT('',(105.71865,-94.24908,1.585)); +#179641 = VECTOR('',#179642,1.); +#179642 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#179643 = ORIENTED_EDGE('',*,*,#179644,.T.); +#179644 = EDGE_CURVE('',#179637,#179645,#179647,.T.); +#179645 = VERTEX_POINT('',#179646); +#179646 = CARTESIAN_POINT('',(105.55797,-94.213382,1.585)); +#179647 = LINE('',#179648,#179649); +#179648 = CARTESIAN_POINT('',(105.650135,-94.214823,1.585)); +#179649 = VECTOR('',#179650,1.); +#179650 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#179651 = ORIENTED_EDGE('',*,*,#179652,.T.); +#179652 = EDGE_CURVE('',#179645,#179653,#179655,.T.); +#179653 = VERTEX_POINT('',#179654); +#179654 = CARTESIAN_POINT('',(105.572602,-94.064823,1.585)); +#179655 = CIRCLE('',#179656,7.500006711464E-02); +#179656 = AXIS2_PLACEMENT_3D('',#179657,#179658,#179659); +#179657 = CARTESIAN_POINT('',(105.57260193288,-94.13982306711,1.585)); +#179658 = DIRECTION('',(0.,0.,-1.)); +#179659 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#179660 = ORIENTED_EDGE('',*,*,#179661,.T.); +#179661 = EDGE_CURVE('',#179653,#179662,#179664,.T.); +#179662 = VERTEX_POINT('',#179663); +#179663 = CARTESIAN_POINT('',(105.687649,-94.067486,1.585)); +#179664 = LINE('',#179665,#179666); +#179665 = CARTESIAN_POINT('',(105.572602,-94.064823,1.585)); +#179666 = VECTOR('',#179667,1.); +#179667 = DIRECTION('',(0.999732214371,-2.314086318521E-02,0.)); +#179668 = ORIENTED_EDGE('',*,*,#179669,.T.); +#179669 = EDGE_CURVE('',#179662,#179670,#179672,.T.); +#179670 = VERTEX_POINT('',#179671); +#179671 = CARTESIAN_POINT('',(105.810361,-94.12969,1.585)); +#179672 = LINE('',#179673,#179674); +#179673 = CARTESIAN_POINT('',(105.687649,-94.067486,1.585)); +#179674 = VECTOR('',#179675,1.); +#179675 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#179676 = ORIENTED_EDGE('',*,*,#179677,.T.); +#179677 = EDGE_CURVE('',#179670,#179678,#179680,.T.); +#179678 = VERTEX_POINT('',#179679); +#179679 = CARTESIAN_POINT('',(105.905934,-94.224233,1.585)); +#179680 = LINE('',#179681,#179682); +#179681 = CARTESIAN_POINT('',(105.810361,-94.12969,1.585)); +#179682 = VECTOR('',#179683,1.); +#179683 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#179684 = ORIENTED_EDGE('',*,*,#179685,.T.); +#179685 = EDGE_CURVE('',#179678,#179686,#179688,.T.); +#179686 = VERTEX_POINT('',#179687); +#179687 = CARTESIAN_POINT('',(105.93345,-94.196717,1.585)); +#179688 = LINE('',#179689,#179690); +#179689 = CARTESIAN_POINT('',(105.905934,-94.224233,1.585)); +#179690 = VECTOR('',#179691,1.); +#179691 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#179692 = ORIENTED_EDGE('',*,*,#179693,.T.); +#179693 = EDGE_CURVE('',#179686,#179694,#179696,.T.); +#179694 = VERTEX_POINT('',#179695); +#179695 = CARTESIAN_POINT('',(105.93345,-93.559119,1.585)); +#179696 = CIRCLE('',#179697,0.985282207896); +#179697 = AXIS2_PLACEMENT_3D('',#179698,#179699,#179700); +#179698 = CARTESIAN_POINT('',(105.00116880486,-93.877918,1.585)); +#179699 = DIRECTION('',(0.,-0.,1.)); +#179700 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#179701 = ORIENTED_EDGE('',*,*,#179702,.T.); +#179702 = EDGE_CURVE('',#179694,#179577,#179703,.T.); +#179703 = LINE('',#179704,#179705); +#179704 = CARTESIAN_POINT('',(105.93345,-93.559119,1.585)); +#179705 = VECTOR('',#179706,1.); +#179706 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179707 = PLANE('',#179708); +#179708 = AXIS2_PLACEMENT_3D('',#179709,#179710,#179711); +#179709 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179710 = DIRECTION('',(0.,0.,1.)); +#179711 = DIRECTION('',(1.,0.,-0.)); +#179712 = SHELL_BASED_SURFACE_MODEL('',(#179713)); +#179713 = OPEN_SHELL('',(#179714)); +#179714 = ADVANCED_FACE('',(#179715),#179874,.T.); +#179715 = FACE_BOUND('',#179716,.F.); +#179716 = EDGE_LOOP('',(#179717,#179728,#179736,#179744,#179752,#179760, + #179768,#179776,#179785,#179793,#179802,#179810,#179818,#179826, + #179835,#179843,#179851,#179859,#179868)); +#179717 = ORIENTED_EDGE('',*,*,#179718,.T.); +#179718 = EDGE_CURVE('',#179719,#179721,#179723,.T.); +#179719 = VERTEX_POINT('',#179720); +#179720 = CARTESIAN_POINT('',(106.443823,-93.358456,1.585)); +#179721 = VERTEX_POINT('',#179722); +#179722 = CARTESIAN_POINT('',(106.953218,-93.367786,1.585)); +#179723 = CIRCLE('',#179724,0.450326844012); +#179724 = AXIS2_PLACEMENT_3D('',#179725,#179726,#179727); +#179725 = CARTESIAN_POINT('',(106.6917200301,-93.73440989199,1.585)); +#179726 = DIRECTION('',(0.,0.,-1.)); +#179727 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#179728 = ORIENTED_EDGE('',*,*,#179729,.T.); +#179729 = EDGE_CURVE('',#179721,#179730,#179732,.T.); +#179730 = VERTEX_POINT('',#179731); +#179731 = CARTESIAN_POINT('',(107.016671,-93.433316,1.585)); +#179732 = LINE('',#179733,#179734); +#179733 = CARTESIAN_POINT('',(106.953218,-93.367786,1.585)); +#179734 = VECTOR('',#179735,1.); +#179735 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#179736 = ORIENTED_EDGE('',*,*,#179737,.T.); +#179737 = EDGE_CURVE('',#179730,#179738,#179740,.T.); +#179738 = VERTEX_POINT('',#179739); +#179739 = CARTESIAN_POINT('',(107.074732,-93.553763,1.585)); +#179740 = LINE('',#179741,#179742); +#179741 = CARTESIAN_POINT('',(107.016671,-93.433316,1.585)); +#179742 = VECTOR('',#179743,1.); +#179743 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#179744 = ORIENTED_EDGE('',*,*,#179745,.T.); +#179745 = EDGE_CURVE('',#179738,#179746,#179748,.T.); +#179746 = VERTEX_POINT('',#179747); +#179747 = CARTESIAN_POINT('',(107.073973,-93.680095,1.585)); +#179748 = LINE('',#179749,#179750); +#179749 = CARTESIAN_POINT('',(107.074732,-93.553763,1.585)); +#179750 = VECTOR('',#179751,1.); +#179751 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#179752 = ORIENTED_EDGE('',*,*,#179753,.T.); +#179753 = EDGE_CURVE('',#179746,#179754,#179756,.T.); +#179754 = VERTEX_POINT('',#179755); +#179755 = CARTESIAN_POINT('',(107.015915,-93.848158,1.585)); +#179756 = LINE('',#179757,#179758); +#179757 = CARTESIAN_POINT('',(107.073973,-93.680095,1.585)); +#179758 = VECTOR('',#179759,1.); +#179759 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#179760 = ORIENTED_EDGE('',*,*,#179761,.T.); +#179761 = EDGE_CURVE('',#179754,#179762,#179764,.T.); +#179762 = VERTEX_POINT('',#179763); +#179763 = CARTESIAN_POINT('',(106.563192,-94.302919,1.585)); +#179764 = LINE('',#179765,#179766); +#179765 = CARTESIAN_POINT('',(107.015915,-93.848158,1.585)); +#179766 = VECTOR('',#179767,1.); +#179767 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#179768 = ORIENTED_EDGE('',*,*,#179769,.T.); +#179769 = EDGE_CURVE('',#179762,#179770,#179772,.T.); +#179770 = VERTEX_POINT('',#179771); +#179771 = CARTESIAN_POINT('',(107.015805,-94.30436,1.585)); +#179772 = LINE('',#179773,#179774); +#179773 = CARTESIAN_POINT('',(106.563192,-94.302919,1.585)); +#179774 = VECTOR('',#179775,1.); +#179775 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#179776 = ORIENTED_EDGE('',*,*,#179777,.T.); +#179777 = EDGE_CURVE('',#179770,#179778,#179780,.T.); +#179778 = VERTEX_POINT('',#179779); +#179779 = CARTESIAN_POINT('',(107.001173,-94.452919,1.585)); +#179780 = CIRCLE('',#179781,7.500006711464E-02); +#179781 = AXIS2_PLACEMENT_3D('',#179782,#179783,#179784); +#179782 = CARTESIAN_POINT('',(107.00117306711,-94.37791893288,1.585)); +#179783 = DIRECTION('',(0.,0.,-1.)); +#179784 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#179785 = ORIENTED_EDGE('',*,*,#179786,.T.); +#179786 = EDGE_CURVE('',#179778,#179787,#179789,.T.); +#179787 = VERTEX_POINT('',#179788); +#179788 = CARTESIAN_POINT('',(106.367494,-94.451478,1.585)); +#179789 = LINE('',#179790,#179791); +#179790 = CARTESIAN_POINT('',(107.001173,-94.452919,1.585)); +#179791 = VECTOR('',#179792,1.); +#179792 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#179793 = ORIENTED_EDGE('',*,*,#179794,.T.); +#179794 = EDGE_CURVE('',#179787,#179795,#179797,.T.); +#179795 = VERTEX_POINT('',#179796); +#179796 = CARTESIAN_POINT('',(106.329093,-94.324886,1.585)); +#179797 = CIRCLE('',#179798,7.500021013108E-02); +#179798 = AXIS2_PLACEMENT_3D('',#179799,#179800,#179801); +#179799 = CARTESIAN_POINT('',(106.3821263167,-94.37791899764,1.585)); +#179800 = DIRECTION('',(0.,0.,-1.)); +#179801 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#179802 = ORIENTED_EDGE('',*,*,#179803,.T.); +#179803 = EDGE_CURVE('',#179795,#179804,#179806,.T.); +#179804 = VERTEX_POINT('',#179805); +#179805 = CARTESIAN_POINT('',(106.888001,-93.765976,1.585)); +#179806 = LINE('',#179807,#179808); +#179807 = CARTESIAN_POINT('',(106.329093,-94.324886,1.585)); +#179808 = VECTOR('',#179809,1.); +#179809 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#179810 = ORIENTED_EDGE('',*,*,#179811,.T.); +#179811 = EDGE_CURVE('',#179804,#179812,#179814,.T.); +#179812 = VERTEX_POINT('',#179813); +#179813 = CARTESIAN_POINT('',(106.926173,-93.651463,1.585)); +#179814 = LINE('',#179815,#179816); +#179815 = CARTESIAN_POINT('',(106.888001,-93.765976,1.585)); +#179816 = VECTOR('',#179817,1.); +#179817 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#179818 = ORIENTED_EDGE('',*,*,#179819,.T.); +#179819 = EDGE_CURVE('',#179812,#179820,#179822,.T.); +#179820 = VERTEX_POINT('',#179821); +#179821 = CARTESIAN_POINT('',(106.926173,-93.5861,1.585)); +#179822 = LINE('',#179823,#179824); +#179823 = CARTESIAN_POINT('',(106.926173,-93.651463,1.585)); +#179824 = VECTOR('',#179825,1.); +#179825 = DIRECTION('',(0.,1.,0.)); +#179826 = ORIENTED_EDGE('',*,*,#179827,.T.); +#179827 = EDGE_CURVE('',#179820,#179828,#179830,.T.); +#179828 = VERTEX_POINT('',#179829); +#179829 = CARTESIAN_POINT('',(106.792992,-93.452919,1.585)); +#179830 = CIRCLE('',#179831,0.18686440374); +#179831 = AXIS2_PLACEMENT_3D('',#179832,#179833,#179834); +#179832 = CARTESIAN_POINT('',(106.745456,-93.633636,1.585)); +#179833 = DIRECTION('',(0.,0.,1.)); +#179834 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#179835 = ORIENTED_EDGE('',*,*,#179836,.T.); +#179836 = EDGE_CURVE('',#179828,#179837,#179839,.T.); +#179837 = VERTEX_POINT('',#179838); +#179838 = CARTESIAN_POINT('',(106.590307,-93.452919,1.585)); +#179839 = LINE('',#179840,#179841); +#179840 = CARTESIAN_POINT('',(106.792992,-93.452919,1.585)); +#179841 = VECTOR('',#179842,1.); +#179842 = DIRECTION('',(-1.,0.,0.)); +#179843 = ORIENTED_EDGE('',*,*,#179844,.T.); +#179844 = EDGE_CURVE('',#179837,#179845,#179847,.T.); +#179845 = VERTEX_POINT('',#179846); +#179846 = CARTESIAN_POINT('',(106.521791,-93.487177,1.585)); +#179847 = LINE('',#179848,#179849); +#179848 = CARTESIAN_POINT('',(106.590307,-93.452919,1.585)); +#179849 = VECTOR('',#179850,1.); +#179850 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#179851 = ORIENTED_EDGE('',*,*,#179852,.T.); +#179852 = EDGE_CURVE('',#179845,#179853,#179855,.T.); +#179853 = VERTEX_POINT('',#179854); +#179854 = CARTESIAN_POINT('',(106.471413,-93.535517,1.585)); +#179855 = LINE('',#179856,#179857); +#179856 = CARTESIAN_POINT('',(106.521791,-93.487177,1.585)); +#179857 = VECTOR('',#179858,1.); +#179858 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#179859 = ORIENTED_EDGE('',*,*,#179860,.T.); +#179860 = EDGE_CURVE('',#179853,#179861,#179863,.T.); +#179861 = VERTEX_POINT('',#179862); +#179862 = CARTESIAN_POINT('',(106.376712,-93.420124,1.585)); +#179863 = CIRCLE('',#179864,7.499996838527E-02); +#179864 = AXIS2_PLACEMENT_3D('',#179865,#179866,#179867); +#179865 = CARTESIAN_POINT('',(106.429745,-93.47315697246,1.585)); +#179866 = DIRECTION('',(0.,0.,-1.)); +#179867 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#179868 = ORIENTED_EDGE('',*,*,#179869,.T.); +#179869 = EDGE_CURVE('',#179861,#179719,#179870,.T.); +#179870 = LINE('',#179871,#179872); +#179871 = CARTESIAN_POINT('',(106.376712,-93.420124,1.585)); +#179872 = VECTOR('',#179873,1.); +#179873 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#179874 = PLANE('',#179875); +#179875 = AXIS2_PLACEMENT_3D('',#179876,#179877,#179878); +#179876 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179877 = DIRECTION('',(0.,0.,1.)); +#179878 = DIRECTION('',(1.,0.,-0.)); +#179879 = SHELL_BASED_SURFACE_MODEL('',(#179880)); +#179880 = OPEN_SHELL('',(#179881)); +#179881 = ADVANCED_FACE('',(#179882,#179993),#180045,.T.); +#179882 = FACE_BOUND('',#179883,.F.); +#179883 = EDGE_LOOP('',(#179884,#179895,#179903,#179912,#179920,#179929, + #179937,#179945,#179954,#179962,#179970,#179978,#179987)); +#179884 = ORIENTED_EDGE('',*,*,#179885,.T.); +#179885 = EDGE_CURVE('',#179886,#179888,#179890,.T.); +#179886 = VERTEX_POINT('',#179887); +#179887 = CARTESIAN_POINT('',(133.578805,-93.333287,1.585)); +#179888 = VERTEX_POINT('',#179889); +#179889 = CARTESIAN_POINT('',(133.652364,-93.272919,1.585)); +#179890 = CIRCLE('',#179891,7.500074938989E-02); +#179891 = AXIS2_PLACEMENT_3D('',#179892,#179893,#179894); +#179892 = CARTESIAN_POINT('',(133.65236446611,-93.34791974938,1.585)); +#179893 = DIRECTION('',(0.,0.,-1.)); +#179894 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#179895 = ORIENTED_EDGE('',*,*,#179896,.T.); +#179896 = EDGE_CURVE('',#179888,#179897,#179899,.T.); +#179897 = VERTEX_POINT('',#179898); +#179898 = CARTESIAN_POINT('',(134.047948,-93.27436,1.585)); +#179899 = LINE('',#179900,#179901); +#179900 = CARTESIAN_POINT('',(133.652364,-93.272919,1.585)); +#179901 = VECTOR('',#179902,1.); +#179902 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#179903 = ORIENTED_EDGE('',*,*,#179904,.T.); +#179904 = EDGE_CURVE('',#179897,#179905,#179907,.T.); +#179905 = VERTEX_POINT('',#179906); +#179906 = CARTESIAN_POINT('',(134.297351,-93.523763,1.585)); +#179907 = CIRCLE('',#179908,0.347870264855); +#179908 = AXIS2_PLACEMENT_3D('',#179909,#179910,#179911); +#179909 = CARTESIAN_POINT('',(133.96062026502,-93.61109073497,1.585)); +#179910 = DIRECTION('',(0.,0.,-1.)); +#179911 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#179912 = ORIENTED_EDGE('',*,*,#179913,.T.); +#179913 = EDGE_CURVE('',#179905,#179914,#179916,.T.); +#179914 = VERTEX_POINT('',#179915); +#179915 = CARTESIAN_POINT('',(134.296129,-93.701062,1.585)); +#179916 = LINE('',#179917,#179918); +#179917 = CARTESIAN_POINT('',(134.297351,-93.523763,1.585)); +#179918 = VECTOR('',#179919,1.); +#179919 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#179920 = ORIENTED_EDGE('',*,*,#179921,.T.); +#179921 = EDGE_CURVE('',#179914,#179922,#179924,.T.); +#179922 = VERTEX_POINT('',#179923); +#179923 = CARTESIAN_POINT('',(134.047948,-93.945287,1.585)); +#179924 = CIRCLE('',#179925,0.348632345848); +#179925 = AXIS2_PLACEMENT_3D('',#179926,#179927,#179928); +#179926 = CARTESIAN_POINT('',(133.96017919403,-93.6078834593,1.585)); +#179927 = DIRECTION('',(0.,0.,-1.)); +#179928 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#179929 = ORIENTED_EDGE('',*,*,#179930,.T.); +#179930 = EDGE_CURVE('',#179922,#179931,#179933,.T.); +#179931 = VERTEX_POINT('',#179932); +#179932 = CARTESIAN_POINT('',(134.034431,-93.946618,1.585)); +#179933 = LINE('',#179934,#179935); +#179934 = CARTESIAN_POINT('',(134.047948,-93.945287,1.585)); +#179935 = VECTOR('',#179936,1.); +#179936 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#179937 = ORIENTED_EDGE('',*,*,#179938,.T.); +#179938 = EDGE_CURVE('',#179931,#179939,#179941,.T.); +#179939 = VERTEX_POINT('',#179940); +#179940 = CARTESIAN_POINT('',(134.292445,-94.317723,1.585)); +#179941 = LINE('',#179942,#179943); +#179942 = CARTESIAN_POINT('',(134.034431,-93.946618,1.585)); +#179943 = VECTOR('',#179944,1.); +#179944 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#179945 = ORIENTED_EDGE('',*,*,#179946,.T.); +#179946 = EDGE_CURVE('',#179939,#179947,#179949,.T.); +#179947 = VERTEX_POINT('',#179948); +#179948 = CARTESIAN_POINT('',(134.16235,-94.390929,1.585)); +#179949 = CIRCLE('',#179950,7.500005951702E-02); +#179950 = AXIS2_PLACEMENT_3D('',#179951,#179952,#179953); +#179951 = CARTESIAN_POINT('',(134.22379206294,-94.34791874739,1.585)); +#179952 = DIRECTION('',(0.,0.,-1.)); +#179953 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#179954 = ORIENTED_EDGE('',*,*,#179955,.T.); +#179955 = EDGE_CURVE('',#179947,#179956,#179958,.T.); +#179956 = VERTEX_POINT('',#179957); +#179957 = CARTESIAN_POINT('',(133.85141,-93.946728,1.585)); +#179958 = LINE('',#179959,#179960); +#179959 = CARTESIAN_POINT('',(134.16235,-94.390929,1.585)); +#179960 = VECTOR('',#179961,1.); +#179961 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#179962 = ORIENTED_EDGE('',*,*,#179963,.T.); +#179963 = EDGE_CURVE('',#179956,#179964,#179966,.T.); +#179964 = VERTEX_POINT('',#179965); +#179965 = CARTESIAN_POINT('',(133.727364,-93.946728,1.585)); +#179966 = LINE('',#179967,#179968); +#179967 = CARTESIAN_POINT('',(133.85141,-93.946728,1.585)); +#179968 = VECTOR('',#179969,1.); +#179969 = DIRECTION('',(-1.,0.,0.)); +#179970 = ORIENTED_EDGE('',*,*,#179971,.T.); +#179971 = EDGE_CURVE('',#179964,#179972,#179974,.T.); +#179972 = VERTEX_POINT('',#179973); +#179973 = CARTESIAN_POINT('',(133.725923,-94.362551,1.585)); +#179974 = LINE('',#179975,#179976); +#179975 = CARTESIAN_POINT('',(133.727364,-93.946728,1.585)); +#179976 = VECTOR('',#179977,1.); +#179977 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#179978 = ORIENTED_EDGE('',*,*,#179979,.T.); +#179979 = EDGE_CURVE('',#179972,#179980,#179982,.T.); +#179980 = VERTEX_POINT('',#179981); +#179981 = CARTESIAN_POINT('',(133.577364,-94.347919,1.585)); +#179982 = CIRCLE('',#179983,7.500006711464E-02); +#179983 = AXIS2_PLACEMENT_3D('',#179984,#179985,#179986); +#179984 = CARTESIAN_POINT('',(133.65236406711,-94.34791906711,1.585)); +#179985 = DIRECTION('',(-0.,0.,-1.)); +#179986 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#179987 = ORIENTED_EDGE('',*,*,#179988,.T.); +#179988 = EDGE_CURVE('',#179980,#179886,#179989,.T.); +#179989 = LINE('',#179990,#179991); +#179990 = CARTESIAN_POINT('',(133.577364,-94.347919,1.585)); +#179991 = VECTOR('',#179992,1.); +#179992 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#179993 = FACE_BOUND('',#179994,.F.); +#179994 = EDGE_LOOP('',(#179995,#180006,#180014,#180022,#180030,#180039) + ); +#179995 = ORIENTED_EDGE('',*,*,#179996,.T.); +#179996 = EDGE_CURVE('',#179997,#179999,#180001,.T.); +#179997 = VERTEX_POINT('',#179998); +#179998 = CARTESIAN_POINT('',(134.148792,-93.5561,1.585)); +#179999 = VERTEX_POINT('',#180000); +#180000 = CARTESIAN_POINT('',(134.015611,-93.422919,1.585)); +#180001 = CIRCLE('',#180002,0.18686440374); +#180002 = AXIS2_PLACEMENT_3D('',#180003,#180004,#180005); +#180003 = CARTESIAN_POINT('',(133.968075,-93.603636,1.585)); +#180004 = DIRECTION('',(0.,0.,1.)); +#180005 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#180006 = ORIENTED_EDGE('',*,*,#180007,.T.); +#180007 = EDGE_CURVE('',#179999,#180008,#180010,.T.); +#180008 = VERTEX_POINT('',#180009); +#180009 = CARTESIAN_POINT('',(133.727364,-93.422919,1.585)); +#180010 = LINE('',#180011,#180012); +#180011 = CARTESIAN_POINT('',(134.015611,-93.422919,1.585)); +#180012 = VECTOR('',#180013,1.); +#180013 = DIRECTION('',(-1.,0.,0.)); +#180014 = ORIENTED_EDGE('',*,*,#180015,.T.); +#180015 = EDGE_CURVE('',#180008,#180016,#180018,.T.); +#180016 = VERTEX_POINT('',#180017); +#180017 = CARTESIAN_POINT('',(133.727364,-93.796728,1.585)); +#180018 = LINE('',#180019,#180020); +#180019 = CARTESIAN_POINT('',(133.727364,-93.422919,1.585)); +#180020 = VECTOR('',#180021,1.); +#180021 = DIRECTION('',(0.,-1.,0.)); +#180022 = ORIENTED_EDGE('',*,*,#180023,.T.); +#180023 = EDGE_CURVE('',#180016,#180024,#180026,.T.); +#180024 = VERTEX_POINT('',#180025); +#180025 = CARTESIAN_POINT('',(134.015611,-93.796728,1.585)); +#180026 = LINE('',#180027,#180028); +#180027 = CARTESIAN_POINT('',(133.727364,-93.796728,1.585)); +#180028 = VECTOR('',#180029,1.); +#180029 = DIRECTION('',(1.,0.,0.)); +#180030 = ORIENTED_EDGE('',*,*,#180031,.T.); +#180031 = EDGE_CURVE('',#180024,#180032,#180034,.T.); +#180032 = VERTEX_POINT('',#180033); +#180033 = CARTESIAN_POINT('',(134.148792,-93.663547,1.585)); +#180034 = CIRCLE('',#180035,0.18686440374); +#180035 = AXIS2_PLACEMENT_3D('',#180036,#180037,#180038); +#180036 = CARTESIAN_POINT('',(133.968075,-93.616011,1.585)); +#180037 = DIRECTION('',(0.,0.,1.)); +#180038 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#180039 = ORIENTED_EDGE('',*,*,#180040,.T.); +#180040 = EDGE_CURVE('',#180032,#179997,#180041,.T.); +#180041 = LINE('',#180042,#180043); +#180042 = CARTESIAN_POINT('',(134.148792,-93.663547,1.585)); +#180043 = VECTOR('',#180044,1.); +#180044 = DIRECTION('',(0.,1.,0.)); +#180045 = PLANE('',#180046); +#180046 = AXIS2_PLACEMENT_3D('',#180047,#180048,#180049); +#180047 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180048 = DIRECTION('',(0.,0.,1.)); +#180049 = DIRECTION('',(1.,0.,-0.)); +#180050 = SHELL_BASED_SURFACE_MODEL('',(#180051)); +#180051 = OPEN_SHELL('',(#180052)); +#180052 = ADVANCED_FACE('',(#180053),#180248,.T.); +#180053 = FACE_BOUND('',#180054,.F.); +#180054 = EDGE_LOOP('',(#180055,#180066,#180074,#180083,#180091,#180099, + #180107,#180115,#180124,#180132,#180141,#180149,#180157,#180165, + #180174,#180182,#180191,#180199,#180208,#180216,#180225,#180233, + #180242)); +#180055 = ORIENTED_EDGE('',*,*,#180056,.T.); +#180056 = EDGE_CURVE('',#180057,#180059,#180061,.T.); +#180057 = VERTEX_POINT('',#180058); +#180058 = CARTESIAN_POINT('',(134.580626,-93.32604,1.585)); +#180059 = VERTEX_POINT('',#180060); +#180060 = CARTESIAN_POINT('',(134.652364,-93.272919,1.585)); +#180061 = CIRCLE('',#180062,7.50033610077E-02); +#180062 = AXIS2_PLACEMENT_3D('',#180063,#180064,#180065); +#180063 = CARTESIAN_POINT('',(134.6523662707,-93.34792236097,1.585)); +#180064 = DIRECTION('',(0.,0.,-1.)); +#180065 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#180066 = ORIENTED_EDGE('',*,*,#180067,.T.); +#180067 = EDGE_CURVE('',#180059,#180068,#180070,.T.); +#180068 = VERTEX_POINT('',#180069); +#180069 = CARTESIAN_POINT('',(135.143186,-93.27436,1.585)); +#180070 = LINE('',#180071,#180072); +#180071 = CARTESIAN_POINT('',(134.652364,-93.272919,1.585)); +#180072 = VECTOR('',#180073,1.); +#180073 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#180074 = ORIENTED_EDGE('',*,*,#180075,.T.); +#180075 = EDGE_CURVE('',#180068,#180076,#180078,.T.); +#180076 = VERTEX_POINT('',#180077); +#180077 = CARTESIAN_POINT('',(135.128554,-93.422919,1.585)); +#180078 = CIRCLE('',#180079,7.500006711463E-02); +#180079 = AXIS2_PLACEMENT_3D('',#180080,#180081,#180082); +#180080 = CARTESIAN_POINT('',(135.12855406711,-93.34791893288,1.585)); +#180081 = DIRECTION('',(0.,0.,-1.)); +#180082 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#180083 = ORIENTED_EDGE('',*,*,#180084,.T.); +#180084 = EDGE_CURVE('',#180076,#180085,#180087,.T.); +#180085 = VERTEX_POINT('',#180086); +#180086 = CARTESIAN_POINT('',(134.720238,-93.422919,1.585)); +#180087 = LINE('',#180088,#180089); +#180088 = CARTESIAN_POINT('',(135.128554,-93.422919,1.585)); +#180089 = VECTOR('',#180090,1.); +#180090 = DIRECTION('',(-1.,0.,0.)); +#180091 = ORIENTED_EDGE('',*,*,#180092,.T.); +#180092 = EDGE_CURVE('',#180085,#180093,#180095,.T.); +#180093 = VERTEX_POINT('',#180094); +#180094 = CARTESIAN_POINT('',(134.695419,-93.671109,1.585)); +#180095 = LINE('',#180096,#180097); +#180096 = CARTESIAN_POINT('',(134.720238,-93.422919,1.585)); +#180097 = VECTOR('',#180098,1.); +#180098 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#180099 = ORIENTED_EDGE('',*,*,#180100,.T.); +#180100 = EDGE_CURVE('',#180093,#180101,#180103,.T.); +#180101 = VERTEX_POINT('',#180102); +#180102 = CARTESIAN_POINT('',(134.73297,-93.655312,1.585)); +#180103 = LINE('',#180104,#180105); +#180104 = CARTESIAN_POINT('',(134.695419,-93.671109,1.585)); +#180105 = VECTOR('',#180106,1.); +#180106 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#180107 = ORIENTED_EDGE('',*,*,#180108,.T.); +#180108 = EDGE_CURVE('',#180101,#180109,#180111,.T.); +#180109 = VERTEX_POINT('',#180110); +#180110 = CARTESIAN_POINT('',(135.005506,-93.656534,1.585)); +#180111 = LINE('',#180112,#180113); +#180112 = CARTESIAN_POINT('',(134.73297,-93.655312,1.585)); +#180113 = VECTOR('',#180114,1.); +#180114 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#180115 = ORIENTED_EDGE('',*,*,#180116,.T.); +#180116 = EDGE_CURVE('',#180109,#180117,#180119,.T.); +#180117 = VERTEX_POINT('',#180118); +#180118 = CARTESIAN_POINT('',(135.249732,-93.904715,1.585)); +#180119 = CIRCLE('',#180120,0.348625649748); +#180120 = AXIS2_PLACEMENT_3D('',#180121,#180122,#180123); +#180121 = CARTESIAN_POINT('',(134.91233404586,-93.99247868387,1.585)); +#180122 = DIRECTION('',(0.,0.,-1.)); +#180123 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#180124 = ORIENTED_EDGE('',*,*,#180125,.T.); +#180125 = EDGE_CURVE('',#180117,#180126,#180128,.T.); +#180126 = VERTEX_POINT('',#180127); +#180127 = CARTESIAN_POINT('',(135.24851,-94.177252,1.585)); +#180128 = LINE('',#180129,#180130); +#180129 = CARTESIAN_POINT('',(135.249732,-93.904715,1.585)); +#180130 = VECTOR('',#180131,1.); +#180131 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#180132 = ORIENTED_EDGE('',*,*,#180133,.T.); +#180133 = EDGE_CURVE('',#180126,#180134,#180136,.T.); +#180134 = VERTEX_POINT('',#180135); +#180135 = CARTESIAN_POINT('',(135.000329,-94.421478,1.585)); +#180136 = CIRCLE('',#180137,0.348635327447); +#180137 = AXIS2_PLACEMENT_3D('',#180138,#180139,#180140); +#180138 = CARTESIAN_POINT('',(134.91255748129,-94.08407208415,1.585)); +#180139 = DIRECTION('',(0.,0.,-1.)); +#180140 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#180141 = ORIENTED_EDGE('',*,*,#180142,.T.); +#180142 = EDGE_CURVE('',#180134,#180143,#180145,.T.); +#180143 = VERTEX_POINT('',#180144); +#180144 = CARTESIAN_POINT('',(134.727792,-94.420256,1.585)); +#180145 = LINE('',#180146,#180147); +#180146 = CARTESIAN_POINT('',(135.000329,-94.421478,1.585)); +#180147 = VECTOR('',#180148,1.); +#180148 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#180149 = ORIENTED_EDGE('',*,*,#180150,.T.); +#180150 = EDGE_CURVE('',#180143,#180151,#180153,.T.); +#180151 = VERTEX_POINT('',#180152); +#180152 = CARTESIAN_POINT('',(134.605079,-94.35805,1.585)); +#180153 = LINE('',#180154,#180155); +#180154 = CARTESIAN_POINT('',(134.727792,-94.420256,1.585)); +#180155 = VECTOR('',#180156,1.); +#180156 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#180157 = ORIENTED_EDGE('',*,*,#180158,.T.); +#180158 = EDGE_CURVE('',#180151,#180159,#180161,.T.); +#180159 = VERTEX_POINT('',#180160); +#180160 = CARTESIAN_POINT('',(134.542384,-94.294347,1.585)); +#180161 = LINE('',#180162,#180163); +#180162 = CARTESIAN_POINT('',(134.605079,-94.35805,1.585)); +#180163 = VECTOR('',#180164,1.); +#180164 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#180165 = ORIENTED_EDGE('',*,*,#180166,.T.); +#180166 = EDGE_CURVE('',#180159,#180167,#180169,.T.); +#180167 = VERTEX_POINT('',#180168); +#180168 = CARTESIAN_POINT('',(134.657779,-94.199648,1.585)); +#180169 = CIRCLE('',#180170,7.50001266804E-02); +#180170 = AXIS2_PLACEMENT_3D('',#180171,#180172,#180173); +#180171 = CARTESIAN_POINT('',(134.60474505199,-94.25268024831,1.585)); +#180172 = DIRECTION('',(0.,0.,-1.)); +#180173 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#180174 = ORIENTED_EDGE('',*,*,#180175,.T.); +#180175 = EDGE_CURVE('',#180167,#180176,#180178,.T.); +#180176 = VERTEX_POINT('',#180177); +#180177 = CARTESIAN_POINT('',(134.696791,-94.238661,1.585)); +#180178 = LINE('',#180179,#180180); +#180179 = CARTESIAN_POINT('',(134.657779,-94.199648,1.585)); +#180180 = VECTOR('',#180181,1.); +#180181 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#180182 = ORIENTED_EDGE('',*,*,#180183,.T.); +#180183 = EDGE_CURVE('',#180176,#180184,#180186,.T.); +#180184 = VERTEX_POINT('',#180185); +#180185 = CARTESIAN_POINT('',(135.036507,-94.238661,1.585)); +#180186 = CIRCLE('',#180187,0.305620374329); +#180187 = AXIS2_PLACEMENT_3D('',#180188,#180189,#180190); +#180188 = CARTESIAN_POINT('',(134.866649,-93.98459,1.585)); +#180189 = DIRECTION('',(0.,0.,1.)); +#180190 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#180191 = ORIENTED_EDGE('',*,*,#180192,.T.); +#180192 = EDGE_CURVE('',#180184,#180193,#180195,.T.); +#180193 = VERTEX_POINT('',#180194); +#180194 = CARTESIAN_POINT('',(135.066914,-94.208253,1.585)); +#180195 = LINE('',#180196,#180197); +#180196 = CARTESIAN_POINT('',(135.036507,-94.238661,1.585)); +#180197 = VECTOR('',#180198,1.); +#180198 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#180199 = ORIENTED_EDGE('',*,*,#180200,.T.); +#180200 = EDGE_CURVE('',#180193,#180201,#180203,.T.); +#180201 = VERTEX_POINT('',#180202); +#180202 = CARTESIAN_POINT('',(135.066915,-93.868536,1.585)); +#180203 = CIRCLE('',#180204,0.305616146029); +#180204 = AXIS2_PLACEMENT_3D('',#180205,#180206,#180207); +#180205 = CARTESIAN_POINT('',(134.81284892049,-94.03839375212,1.585)); +#180206 = DIRECTION('',(0.,-0.,1.)); +#180207 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#180208 = ORIENTED_EDGE('',*,*,#180209,.T.); +#180209 = EDGE_CURVE('',#180201,#180210,#180212,.T.); +#180210 = VERTEX_POINT('',#180211); +#180211 = CARTESIAN_POINT('',(135.036508,-93.838129,1.585)); +#180212 = LINE('',#180213,#180214); +#180213 = CARTESIAN_POINT('',(135.066915,-93.868536,1.585)); +#180214 = VECTOR('',#180215,1.); +#180215 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#180216 = ORIENTED_EDGE('',*,*,#180217,.T.); +#180217 = EDGE_CURVE('',#180210,#180218,#180220,.T.); +#180218 = VERTEX_POINT('',#180219); +#180219 = CARTESIAN_POINT('',(134.696791,-93.838129,1.585)); +#180220 = CIRCLE('',#180221,0.305621483548); +#180221 = AXIS2_PLACEMENT_3D('',#180222,#180223,#180224); +#180222 = CARTESIAN_POINT('',(134.8666495,-94.092201,1.585)); +#180223 = DIRECTION('',(0.,0.,1.)); +#180224 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#180225 = ORIENTED_EDGE('',*,*,#180226,.T.); +#180226 = EDGE_CURVE('',#180218,#180227,#180229,.T.); +#180227 = VERTEX_POINT('',#180228); +#180228 = CARTESIAN_POINT('',(134.640001,-93.890306,1.585)); +#180229 = LINE('',#180230,#180231); +#180230 = CARTESIAN_POINT('',(134.696791,-93.838129,1.585)); +#180231 = VECTOR('',#180232,1.); +#180232 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#180233 = ORIENTED_EDGE('',*,*,#180234,.T.); +#180234 = EDGE_CURVE('',#180227,#180235,#180237,.T.); +#180235 = VERTEX_POINT('',#180236); +#180236 = CARTESIAN_POINT('',(134.530095,-93.831349,1.585)); +#180237 = CIRCLE('',#180238,7.500024172472E-02); +#180238 = AXIS2_PLACEMENT_3D('',#180239,#180240,#180241); +#180239 = CARTESIAN_POINT('',(134.60474497002,-93.82410895619,1.585)); +#180240 = DIRECTION('',(-0.,0.,-1.)); +#180241 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#180242 = ORIENTED_EDGE('',*,*,#180243,.T.); +#180243 = EDGE_CURVE('',#180235,#180057,#180244,.T.); +#180244 = LINE('',#180245,#180246); +#180245 = CARTESIAN_POINT('',(134.530095,-93.831349,1.585)); +#180246 = VECTOR('',#180247,1.); +#180247 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#180248 = PLANE('',#180249); +#180249 = AXIS2_PLACEMENT_3D('',#180250,#180251,#180252); +#180250 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180251 = DIRECTION('',(0.,0.,1.)); +#180252 = DIRECTION('',(1.,0.,-0.)); +#180253 = SHELL_BASED_SURFACE_MODEL('',(#180254)); +#180254 = OPEN_SHELL('',(#180255)); +#180255 = ADVANCED_FACE('',(#180256),#180391,.T.); +#180256 = FACE_BOUND('',#180257,.F.); +#180257 = EDGE_LOOP('',(#180258,#180269,#180277,#180285,#180293,#180302, + #180310,#180318,#180327,#180335,#180343,#180352,#180360,#180368, + #180377,#180385)); +#180258 = ORIENTED_EDGE('',*,*,#180259,.T.); +#180259 = EDGE_CURVE('',#180260,#180262,#180264,.T.); +#180260 = VERTEX_POINT('',#180261); +#180261 = CARTESIAN_POINT('',(135.749238,-93.241051,1.585)); +#180262 = VERTEX_POINT('',#180263); +#180263 = CARTESIAN_POINT('',(135.866372,-93.324018,1.585)); +#180264 = CIRCLE('',#180265,7.499955990673E-02); +#180265 = AXIS2_PLACEMENT_3D('',#180266,#180267,#180268); +#180266 = CARTESIAN_POINT('',(135.79522150095,-93.30030006435,1.585)); +#180267 = DIRECTION('',(0.,0.,-1.)); +#180268 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#180269 = ORIENTED_EDGE('',*,*,#180270,.T.); +#180270 = EDGE_CURVE('',#180262,#180271,#180273,.T.); +#180271 = VERTEX_POINT('',#180272); +#180272 = CARTESIAN_POINT('',(135.661183,-93.939585,1.585)); +#180273 = LINE('',#180274,#180275); +#180274 = CARTESIAN_POINT('',(135.866372,-93.324018,1.585)); +#180275 = VECTOR('',#180276,1.); +#180276 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#180277 = ORIENTED_EDGE('',*,*,#180278,.T.); +#180278 = EDGE_CURVE('',#180271,#180279,#180281,.T.); +#180279 = VERTEX_POINT('',#180280); +#180280 = CARTESIAN_POINT('',(135.958316,-93.939585,1.585)); +#180281 = LINE('',#180282,#180283); +#180282 = CARTESIAN_POINT('',(135.661183,-93.939585,1.585)); +#180283 = VECTOR('',#180284,1.); +#180284 = DIRECTION('',(1.,0.,0.)); +#180285 = ORIENTED_EDGE('',*,*,#180286,.T.); +#180286 = EDGE_CURVE('',#180279,#180287,#180289,.T.); +#180287 = VERTEX_POINT('',#180288); +#180288 = CARTESIAN_POINT('',(135.959757,-93.66662,1.585)); +#180289 = LINE('',#180290,#180291); +#180290 = CARTESIAN_POINT('',(135.958316,-93.939585,1.585)); +#180291 = VECTOR('',#180292,1.); +#180292 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#180293 = ORIENTED_EDGE('',*,*,#180294,.T.); +#180294 = EDGE_CURVE('',#180287,#180295,#180297,.T.); +#180295 = VERTEX_POINT('',#180296); +#180296 = CARTESIAN_POINT('',(136.108316,-93.681252,1.585)); +#180297 = CIRCLE('',#180298,7.500006711465E-02); +#180298 = AXIS2_PLACEMENT_3D('',#180299,#180300,#180301); +#180299 = CARTESIAN_POINT('',(136.03331593288,-93.68125193288,1.585)); +#180300 = DIRECTION('',(0.,0.,-1.)); +#180301 = DIRECTION('',(-0.980784894138,0.195092263892,0.)); +#180302 = ORIENTED_EDGE('',*,*,#180303,.T.); +#180303 = EDGE_CURVE('',#180295,#180304,#180306,.T.); +#180304 = VERTEX_POINT('',#180305); +#180305 = CARTESIAN_POINT('',(136.108316,-93.939585,1.585)); +#180306 = LINE('',#180307,#180308); +#180307 = CARTESIAN_POINT('',(136.108316,-93.681252,1.585)); +#180308 = VECTOR('',#180309,1.); +#180309 = DIRECTION('',(0.,-1.,0.)); +#180310 = ORIENTED_EDGE('',*,*,#180311,.T.); +#180311 = EDGE_CURVE('',#180304,#180312,#180314,.T.); +#180312 = VERTEX_POINT('',#180313); +#180313 = CARTESIAN_POINT('',(136.190805,-93.941026,1.585)); +#180314 = LINE('',#180315,#180316); +#180315 = CARTESIAN_POINT('',(136.108316,-93.939585,1.585)); +#180316 = VECTOR('',#180317,1.); +#180317 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#180318 = ORIENTED_EDGE('',*,*,#180319,.T.); +#180319 = EDGE_CURVE('',#180312,#180320,#180322,.T.); +#180320 = VERTEX_POINT('',#180321); +#180321 = CARTESIAN_POINT('',(136.176173,-94.089585,1.585)); +#180322 = CIRCLE('',#180323,7.500006711464E-02); +#180323 = AXIS2_PLACEMENT_3D('',#180324,#180325,#180326); +#180324 = CARTESIAN_POINT('',(136.17617306711,-94.01458493288,1.585)); +#180325 = DIRECTION('',(0.,0.,-1.)); +#180326 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#180327 = ORIENTED_EDGE('',*,*,#180328,.T.); +#180328 = EDGE_CURVE('',#180320,#180329,#180331,.T.); +#180329 = VERTEX_POINT('',#180330); +#180330 = CARTESIAN_POINT('',(136.108316,-94.089585,1.585)); +#180331 = LINE('',#180332,#180333); +#180332 = CARTESIAN_POINT('',(136.176173,-94.089585,1.585)); +#180333 = VECTOR('',#180334,1.); +#180334 = DIRECTION('',(-1.,0.,0.)); +#180335 = ORIENTED_EDGE('',*,*,#180336,.T.); +#180336 = EDGE_CURVE('',#180329,#180337,#180339,.T.); +#180337 = VERTEX_POINT('',#180338); +#180338 = CARTESIAN_POINT('',(136.106875,-94.362551,1.585)); +#180339 = LINE('',#180340,#180341); +#180340 = CARTESIAN_POINT('',(136.108316,-94.089585,1.585)); +#180341 = VECTOR('',#180342,1.); +#180342 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#180343 = ORIENTED_EDGE('',*,*,#180344,.T.); +#180344 = EDGE_CURVE('',#180337,#180345,#180347,.T.); +#180345 = VERTEX_POINT('',#180346); +#180346 = CARTESIAN_POINT('',(135.958316,-94.347919,1.585)); +#180347 = CIRCLE('',#180348,7.500006711464E-02); +#180348 = AXIS2_PLACEMENT_3D('',#180349,#180350,#180351); +#180349 = CARTESIAN_POINT('',(136.03331606711,-94.34791906711,1.585)); +#180350 = DIRECTION('',(-0.,0.,-1.)); +#180351 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#180352 = ORIENTED_EDGE('',*,*,#180353,.T.); +#180353 = EDGE_CURVE('',#180345,#180354,#180356,.T.); +#180354 = VERTEX_POINT('',#180355); +#180355 = CARTESIAN_POINT('',(135.958316,-94.089585,1.585)); +#180356 = LINE('',#180357,#180358); +#180357 = CARTESIAN_POINT('',(135.958316,-94.347919,1.585)); +#180358 = VECTOR('',#180359,1.); +#180359 = DIRECTION('',(0.,1.,0.)); +#180360 = ORIENTED_EDGE('',*,*,#180361,.T.); +#180361 = EDGE_CURVE('',#180354,#180362,#180364,.T.); +#180362 = VERTEX_POINT('',#180363); +#180363 = CARTESIAN_POINT('',(135.542494,-94.088144,1.585)); +#180364 = LINE('',#180365,#180366); +#180365 = CARTESIAN_POINT('',(135.958316,-94.089585,1.585)); +#180366 = VECTOR('',#180367,1.); +#180367 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#180368 = ORIENTED_EDGE('',*,*,#180369,.T.); +#180369 = EDGE_CURVE('',#180362,#180370,#180372,.T.); +#180370 = VERTEX_POINT('',#180371); +#180371 = CARTESIAN_POINT('',(135.485975,-93.990868,1.585)); +#180372 = CIRCLE('',#180373,7.499997045039E-02); +#180373 = AXIS2_PLACEMENT_3D('',#180374,#180375,#180376); +#180374 = CARTESIAN_POINT('',(135.55712617257,-94.01458521335,1.585)); +#180375 = DIRECTION('',(0.,0.,-1.)); +#180376 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#180377 = ORIENTED_EDGE('',*,*,#180378,.T.); +#180378 = EDGE_CURVE('',#180370,#180379,#180381,.T.); +#180379 = VERTEX_POINT('',#180380); +#180380 = CARTESIAN_POINT('',(135.730064,-93.263158,1.585)); +#180381 = LINE('',#180382,#180383); +#180382 = CARTESIAN_POINT('',(135.485975,-93.990868,1.585)); +#180383 = VECTOR('',#180384,1.); +#180384 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#180385 = ORIENTED_EDGE('',*,*,#180386,.T.); +#180386 = EDGE_CURVE('',#180379,#180260,#180387,.T.); +#180387 = LINE('',#180388,#180389); +#180388 = CARTESIAN_POINT('',(135.730064,-93.263158,1.585)); +#180389 = VECTOR('',#180390,1.); +#180390 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#180391 = PLANE('',#180392); +#180392 = AXIS2_PLACEMENT_3D('',#180393,#180394,#180395); +#180393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180394 = DIRECTION('',(0.,0.,1.)); +#180395 = DIRECTION('',(1.,0.,-0.)); +#180396 = SHELL_BASED_SURFACE_MODEL('',(#180397)); +#180397 = OPEN_SHELL('',(#180398)); +#180398 = ADVANCED_FACE('',(#180399,#180551),#180619,.T.); +#180399 = FACE_BOUND('',#180400,.F.); +#180400 = EDGE_LOOP('',(#180401,#180412,#180420,#180428,#180436,#180445, + #180453,#180461,#180470,#180478,#180487,#180495,#180503,#180511, + #180520,#180528,#180537,#180545)); +#180401 = ORIENTED_EDGE('',*,*,#180402,.T.); +#180402 = EDGE_CURVE('',#180403,#180405,#180407,.T.); +#180403 = VERTEX_POINT('',#180404); +#180404 = CARTESIAN_POINT('',(91.42932,-93.63091,1.585)); +#180405 = VERTEX_POINT('',#180406); +#180406 = CARTESIAN_POINT('',(91.425792,-93.544046,1.585)); +#180407 = CIRCLE('',#180408,7.226649079678E-02); +#180408 = AXIS2_PLACEMENT_3D('',#180409,#180410,#180411); +#180409 = CARTESIAN_POINT('',(91.485240541535,-93.58513512996,1.585)); +#180410 = DIRECTION('',(0.,0.,-1.)); +#180411 = DIRECTION('',(-0.773810114734,-0.633417639741,-0.)); +#180412 = ORIENTED_EDGE('',*,*,#180413,.T.); +#180413 = EDGE_CURVE('',#180405,#180414,#180416,.T.); +#180414 = VERTEX_POINT('',#180415); +#180415 = CARTESIAN_POINT('',(91.446484,-93.523354,1.585)); +#180416 = LINE('',#180417,#180418); +#180417 = CARTESIAN_POINT('',(91.425792,-93.544046,1.585)); +#180418 = VECTOR('',#180419,1.); +#180419 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#180420 = ORIENTED_EDGE('',*,*,#180421,.T.); +#180421 = EDGE_CURVE('',#180414,#180422,#180424,.T.); +#180422 = VERTEX_POINT('',#180423); +#180423 = CARTESIAN_POINT('',(91.488152,-93.510714,1.585)); +#180424 = LINE('',#180425,#180426); +#180425 = CARTESIAN_POINT('',(91.446484,-93.523354,1.585)); +#180426 = VECTOR('',#180427,1.); +#180427 = DIRECTION('',(0.956939376321,0.29028783999,0.)); +#180428 = ORIENTED_EDGE('',*,*,#180429,.T.); +#180429 = EDGE_CURVE('',#180422,#180430,#180432,.T.); +#180430 = VERTEX_POINT('',#180431); +#180431 = CARTESIAN_POINT('',(92.312308,-93.512155,1.585)); +#180432 = LINE('',#180433,#180434); +#180433 = CARTESIAN_POINT('',(91.488152,-93.510714,1.585)); +#180434 = VECTOR('',#180435,1.); +#180435 = DIRECTION('',(0.999998471455,-1.748452716939E-03,0.)); +#180436 = ORIENTED_EDGE('',*,*,#180437,.T.); +#180437 = EDGE_CURVE('',#180430,#180438,#180440,.T.); +#180438 = VERTEX_POINT('',#180439); +#180439 = CARTESIAN_POINT('',(92.561711,-93.761558,1.585)); +#180440 = CIRCLE('',#180441,0.347870264855); +#180441 = AXIS2_PLACEMENT_3D('',#180442,#180443,#180444); +#180442 = CARTESIAN_POINT('',(92.224980265028,-93.84888573497,1.585)); +#180443 = DIRECTION('',(0.,0.,-1.)); +#180444 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#180445 = ORIENTED_EDGE('',*,*,#180446,.T.); +#180446 = EDGE_CURVE('',#180438,#180447,#180449,.T.); +#180447 = VERTEX_POINT('',#180448); +#180448 = CARTESIAN_POINT('',(92.560489,-93.938857,1.585)); +#180449 = LINE('',#180450,#180451); +#180450 = CARTESIAN_POINT('',(92.561711,-93.761558,1.585)); +#180451 = VECTOR('',#180452,1.); +#180452 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#180453 = ORIENTED_EDGE('',*,*,#180454,.T.); +#180454 = EDGE_CURVE('',#180447,#180455,#180457,.T.); +#180455 = VERTEX_POINT('',#180456); +#180456 = CARTESIAN_POINT('',(92.499783,-94.060269,1.585)); +#180457 = LINE('',#180458,#180459); +#180458 = CARTESIAN_POINT('',(92.560489,-93.938857,1.585)); +#180459 = VECTOR('',#180460,1.); +#180460 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#180461 = ORIENTED_EDGE('',*,*,#180462,.T.); +#180462 = EDGE_CURVE('',#180455,#180463,#180465,.T.); +#180463 = VERTEX_POINT('',#180464); +#180464 = CARTESIAN_POINT('',(92.373451,-93.980744,1.585)); +#180465 = CIRCLE('',#180466,7.500029440361E-02); +#180466 = AXIS2_PLACEMENT_3D('',#180467,#180468,#180469); +#180467 = CARTESIAN_POINT('',(92.440533351324,-94.01428505397,1.585)); +#180468 = DIRECTION('',(-0.,0.,-1.)); +#180469 = DIRECTION('',(0.789992214662,-0.613116873665,-0.)); +#180470 = ORIENTED_EDGE('',*,*,#180471,.T.); +#180471 = EDGE_CURVE('',#180463,#180472,#180474,.T.); +#180472 = VERTEX_POINT('',#180473); +#180473 = CARTESIAN_POINT('',(92.413152,-93.901342,1.585)); +#180474 = LINE('',#180475,#180476); +#180475 = CARTESIAN_POINT('',(92.373451,-93.980744,1.585)); +#180476 = VECTOR('',#180477,1.); +#180477 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#180478 = ORIENTED_EDGE('',*,*,#180479,.T.); +#180479 = EDGE_CURVE('',#180472,#180480,#180482,.T.); +#180480 = VERTEX_POINT('',#180481); +#180481 = CARTESIAN_POINT('',(92.348487,-93.694972,1.585)); +#180482 = CIRCLE('',#180483,0.197624884179); +#180483 = AXIS2_PLACEMENT_3D('',#180484,#180485,#180486); +#180484 = CARTESIAN_POINT('',(92.222969507655,-93.8476185,1.585)); +#180485 = DIRECTION('',(0.,-0.,1.)); +#180486 = DIRECTION('',(0.962340816213,-0.271845826618,-0.)); +#180487 = ORIENTED_EDGE('',*,*,#180488,.T.); +#180488 = EDGE_CURVE('',#180480,#180489,#180491,.T.); +#180489 = VERTEX_POINT('',#180490); +#180490 = CARTESIAN_POINT('',(92.279971,-93.660714,1.585)); +#180491 = LINE('',#180492,#180493); +#180492 = CARTESIAN_POINT('',(92.348487,-93.694972,1.585)); +#180493 = VECTOR('',#180494,1.); +#180494 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#180495 = ORIENTED_EDGE('',*,*,#180496,.T.); +#180496 = EDGE_CURVE('',#180489,#180497,#180499,.T.); +#180497 = VERTEX_POINT('',#180498); +#180498 = CARTESIAN_POINT('',(92.227156,-93.661142,1.585)); +#180499 = LINE('',#180500,#180501); +#180500 = CARTESIAN_POINT('',(92.279971,-93.660714,1.585)); +#180501 = VECTOR('',#180502,1.); +#180502 = DIRECTION('',(-0.999967166167,-8.103492324507E-03,0.)); +#180503 = ORIENTED_EDGE('',*,*,#180504,.T.); +#180504 = EDGE_CURVE('',#180497,#180505,#180507,.T.); +#180505 = VERTEX_POINT('',#180506); +#180506 = CARTESIAN_POINT('',(92.227156,-93.891238,1.585)); +#180507 = LINE('',#180508,#180509); +#180508 = CARTESIAN_POINT('',(92.227156,-93.661142,1.585)); +#180509 = VECTOR('',#180510,1.); +#180510 = DIRECTION('',(0.,-1.,0.)); +#180511 = ORIENTED_EDGE('',*,*,#180512,.T.); +#180512 = EDGE_CURVE('',#180505,#180513,#180515,.T.); +#180513 = VERTEX_POINT('',#180514); +#180514 = CARTESIAN_POINT('',(91.978974,-94.135463,1.585)); +#180515 = CIRCLE('',#180516,0.348632713765); +#180516 = AXIS2_PLACEMENT_3D('',#180517,#180518,#180519); +#180517 = CARTESIAN_POINT('',(91.891205973942,-93.79805887627,1.585)); +#180518 = DIRECTION('',(0.,0.,-1.)); +#180519 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#180520 = ORIENTED_EDGE('',*,*,#180521,.T.); +#180521 = EDGE_CURVE('',#180513,#180522,#180524,.T.); +#180522 = VERTEX_POINT('',#180523); +#180523 = CARTESIAN_POINT('',(91.658818,-94.134241,1.585)); +#180524 = LINE('',#180525,#180526); +#180525 = CARTESIAN_POINT('',(91.978974,-94.135463,1.585)); +#180526 = VECTOR('',#180527,1.); +#180527 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#180528 = ORIENTED_EDGE('',*,*,#180529,.T.); +#180529 = EDGE_CURVE('',#180522,#180530,#180532,.T.); +#180530 = VERTEX_POINT('',#180531); +#180531 = CARTESIAN_POINT('',(91.414593,-93.88606,1.585)); +#180532 = CIRCLE('',#180533,0.348628078749); +#180533 = AXIS2_PLACEMENT_3D('',#180534,#180535,#180536); +#180534 = CARTESIAN_POINT('',(91.751993030202,-93.79829464857,1.585)); +#180535 = DIRECTION('',(0.,0.,-1.)); +#180536 = DIRECTION('',(-0.267261978831,-0.963623907275,-0.)); +#180537 = ORIENTED_EDGE('',*,*,#180538,.T.); +#180538 = EDGE_CURVE('',#180530,#180539,#180541,.T.); +#180539 = VERTEX_POINT('',#180540); +#180540 = CARTESIAN_POINT('',(91.415815,-93.661143,1.585)); +#180541 = LINE('',#180542,#180543); +#180542 = CARTESIAN_POINT('',(91.414593,-93.88606,1.585)); +#180543 = VECTOR('',#180544,1.); +#180544 = DIRECTION('',(5.433035139391E-03,0.999985240956,0.)); +#180545 = ORIENTED_EDGE('',*,*,#180546,.T.); +#180546 = EDGE_CURVE('',#180539,#180403,#180547,.T.); +#180547 = LINE('',#180548,#180549); +#180548 = CARTESIAN_POINT('',(91.415815,-93.661143,1.585)); +#180549 = VECTOR('',#180550,1.); +#180550 = DIRECTION('',(0.407855431141,0.913046519784,0.)); +#180551 = FACE_BOUND('',#180552,.F.); +#180552 = EDGE_LOOP('',(#180553,#180563,#180571,#180579,#180587,#180596, + #180604,#180613)); +#180553 = ORIENTED_EDGE('',*,*,#180554,.T.); +#180554 = EDGE_CURVE('',#180555,#180557,#180559,.T.); +#180555 = VERTEX_POINT('',#180556); +#180556 = CARTESIAN_POINT('',(92.079819,-93.698657,1.585)); +#180557 = VERTEX_POINT('',#180558); +#180558 = CARTESIAN_POINT('',(92.060847,-93.660714,1.585)); +#180559 = LINE('',#180560,#180561); +#180560 = CARTESIAN_POINT('',(92.079819,-93.698657,1.585)); +#180561 = VECTOR('',#180562,1.); +#180562 = DIRECTION('',(-0.447223024592,0.894422476392,0.)); +#180563 = ORIENTED_EDGE('',*,*,#180564,.T.); +#180564 = EDGE_CURVE('',#180557,#180565,#180567,.T.); +#180565 = VERTEX_POINT('',#180566); +#180566 = CARTESIAN_POINT('',(91.582124,-93.660714,1.585)); +#180567 = LINE('',#180568,#180569); +#180568 = CARTESIAN_POINT('',(92.060847,-93.660714,1.585)); +#180569 = VECTOR('',#180570,1.); +#180570 = DIRECTION('',(-1.,0.,0.)); +#180571 = ORIENTED_EDGE('',*,*,#180572,.T.); +#180572 = EDGE_CURVE('',#180565,#180573,#180575,.T.); +#180573 = VERTEX_POINT('',#180574); +#180574 = CARTESIAN_POINT('',(91.563152,-93.698657,1.585)); +#180575 = LINE('',#180576,#180577); +#180576 = CARTESIAN_POINT('',(91.582124,-93.660714,1.585)); +#180577 = VECTOR('',#180578,1.); +#180578 = DIRECTION('',(-0.447223024592,-0.894422476392,0.)); +#180579 = ORIENTED_EDGE('',*,*,#180580,.T.); +#180580 = EDGE_CURVE('',#180573,#180581,#180583,.T.); +#180581 = VERTEX_POINT('',#180582); +#180582 = CARTESIAN_POINT('',(91.563152,-93.853723,1.585)); +#180583 = LINE('',#180584,#180585); +#180584 = CARTESIAN_POINT('',(91.563152,-93.698657,1.585)); +#180585 = VECTOR('',#180586,1.); +#180586 = DIRECTION('',(0.,-1.,0.)); +#180587 = ORIENTED_EDGE('',*,*,#180588,.T.); +#180588 = EDGE_CURVE('',#180581,#180589,#180591,.T.); +#180589 = VERTEX_POINT('',#180590); +#180590 = CARTESIAN_POINT('',(91.696333,-93.986904,1.585)); +#180591 = CIRCLE('',#180592,0.18686440374); +#180592 = AXIS2_PLACEMENT_3D('',#180593,#180594,#180595); +#180593 = CARTESIAN_POINT('',(91.743869,-93.806187,1.585)); +#180594 = DIRECTION('',(0.,0.,1.)); +#180595 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#180596 = ORIENTED_EDGE('',*,*,#180597,.T.); +#180597 = EDGE_CURVE('',#180589,#180598,#180600,.T.); +#180598 = VERTEX_POINT('',#180599); +#180599 = CARTESIAN_POINT('',(91.946637,-93.986904,1.585)); +#180600 = LINE('',#180601,#180602); +#180601 = CARTESIAN_POINT('',(91.696333,-93.986904,1.585)); +#180602 = VECTOR('',#180603,1.); +#180603 = DIRECTION('',(1.,0.,0.)); +#180604 = ORIENTED_EDGE('',*,*,#180605,.T.); +#180605 = EDGE_CURVE('',#180598,#180606,#180608,.T.); +#180606 = VERTEX_POINT('',#180607); +#180607 = CARTESIAN_POINT('',(92.079819,-93.853723,1.585)); +#180608 = CIRCLE('',#180609,0.186872595955); +#180609 = AXIS2_PLACEMENT_3D('',#180610,#180611,#180612); +#180610 = CARTESIAN_POINT('',(91.89909536766,-93.80618001068,1.585)); +#180611 = DIRECTION('',(0.,0.,1.)); +#180612 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#180613 = ORIENTED_EDGE('',*,*,#180614,.T.); +#180614 = EDGE_CURVE('',#180606,#180555,#180615,.T.); +#180615 = LINE('',#180616,#180617); +#180616 = CARTESIAN_POINT('',(92.079819,-93.853723,1.585)); +#180617 = VECTOR('',#180618,1.); +#180618 = DIRECTION('',(0.,1.,0.)); +#180619 = PLANE('',#180620); +#180620 = AXIS2_PLACEMENT_3D('',#180621,#180622,#180623); +#180621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180622 = DIRECTION('',(0.,0.,1.)); +#180623 = DIRECTION('',(1.,0.,-0.)); +#180624 = SHELL_BASED_SURFACE_MODEL('',(#180625)); +#180625 = OPEN_SHELL('',(#180626)); +#180626 = ADVANCED_FACE('',(#180627,#180697),#180731,.T.); +#180627 = FACE_BOUND('',#180628,.F.); +#180628 = EDGE_LOOP('',(#180629,#180640,#180648,#180657,#180665,#180674, + #180682,#180691)); +#180629 = ORIENTED_EDGE('',*,*,#180630,.T.); +#180630 = EDGE_CURVE('',#180631,#180633,#180635,.T.); +#180631 = VERTEX_POINT('',#180632); +#180632 = CARTESIAN_POINT('',(173.07165,-75.8231,1.585)); +#180633 = VERTEX_POINT('',#180634); +#180634 = CARTESIAN_POINT('',(173.13165,-75.7631,1.585)); +#180635 = CIRCLE('',#180636,5.999932016265E-02); +#180636 = AXIS2_PLACEMENT_3D('',#180637,#180638,#180639); +#180637 = CARTESIAN_POINT('',(173.13164932015,-75.82309932015,1.585)); +#180638 = DIRECTION('',(0.,0.,-1.)); +#180639 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#180640 = ORIENTED_EDGE('',*,*,#180641,.T.); +#180641 = EDGE_CURVE('',#180633,#180642,#180644,.T.); +#180642 = VERTEX_POINT('',#180643); +#180643 = CARTESIAN_POINT('',(175.25165,-75.7631,1.585)); +#180644 = LINE('',#180645,#180646); +#180645 = CARTESIAN_POINT('',(173.13165,-75.7631,1.585)); +#180646 = VECTOR('',#180647,1.); +#180647 = DIRECTION('',(1.,0.,0.)); +#180648 = ORIENTED_EDGE('',*,*,#180649,.T.); +#180649 = EDGE_CURVE('',#180642,#180650,#180652,.T.); +#180650 = VERTEX_POINT('',#180651); +#180651 = CARTESIAN_POINT('',(175.31165,-75.8231,1.585)); +#180652 = CIRCLE('',#180653,5.999932016264E-02); +#180653 = AXIS2_PLACEMENT_3D('',#180654,#180655,#180656); +#180654 = CARTESIAN_POINT('',(175.25165067984,-75.82309932015,1.585)); +#180655 = DIRECTION('',(0.,0.,-1.)); +#180656 = DIRECTION('',(-1.133081470032E-05,0.999999999936,0.)); +#180657 = ORIENTED_EDGE('',*,*,#180658,.T.); +#180658 = EDGE_CURVE('',#180650,#180659,#180661,.T.); +#180659 = VERTEX_POINT('',#180660); +#180660 = CARTESIAN_POINT('',(175.31165,-93.8831,1.585)); +#180661 = LINE('',#180662,#180663); +#180662 = CARTESIAN_POINT('',(175.31165,-75.8231,1.585)); +#180663 = VECTOR('',#180664,1.); +#180664 = DIRECTION('',(0.,-1.,0.)); +#180665 = ORIENTED_EDGE('',*,*,#180666,.T.); +#180666 = EDGE_CURVE('',#180659,#180667,#180669,.T.); +#180667 = VERTEX_POINT('',#180668); +#180668 = CARTESIAN_POINT('',(175.25165,-93.9431,1.585)); +#180669 = CIRCLE('',#180670,5.999932016256E-02); +#180670 = AXIS2_PLACEMENT_3D('',#180671,#180672,#180673); +#180671 = CARTESIAN_POINT('',(175.25165067984,-93.88310067984,1.585)); +#180672 = DIRECTION('',(0.,0.,-1.)); +#180673 = DIRECTION('',(0.999999999936,1.133081659513E-05,0.)); +#180674 = ORIENTED_EDGE('',*,*,#180675,.T.); +#180675 = EDGE_CURVE('',#180667,#180676,#180678,.T.); +#180676 = VERTEX_POINT('',#180677); +#180677 = CARTESIAN_POINT('',(173.13165,-93.9431,1.585)); +#180678 = LINE('',#180679,#180680); +#180679 = CARTESIAN_POINT('',(175.25165,-93.9431,1.585)); +#180680 = VECTOR('',#180681,1.); +#180681 = DIRECTION('',(-1.,0.,0.)); +#180682 = ORIENTED_EDGE('',*,*,#180683,.T.); +#180683 = EDGE_CURVE('',#180676,#180684,#180686,.T.); +#180684 = VERTEX_POINT('',#180685); +#180685 = CARTESIAN_POINT('',(173.07165,-93.8831,1.585)); +#180686 = CIRCLE('',#180687,5.999932016256E-02); +#180687 = AXIS2_PLACEMENT_3D('',#180688,#180689,#180690); +#180688 = CARTESIAN_POINT('',(173.13164932015,-93.88310067984,1.585)); +#180689 = DIRECTION('',(0.,0.,-1.)); +#180690 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#180691 = ORIENTED_EDGE('',*,*,#180692,.T.); +#180692 = EDGE_CURVE('',#180684,#180631,#180693,.T.); +#180693 = LINE('',#180694,#180695); +#180694 = CARTESIAN_POINT('',(173.07165,-93.8831,1.585)); +#180695 = VECTOR('',#180696,1.); +#180696 = DIRECTION('',(0.,1.,0.)); +#180697 = FACE_BOUND('',#180698,.F.); +#180698 = EDGE_LOOP('',(#180699,#180709,#180717,#180725)); +#180699 = ORIENTED_EDGE('',*,*,#180700,.T.); +#180700 = EDGE_CURVE('',#180701,#180703,#180705,.T.); +#180701 = VERTEX_POINT('',#180702); +#180702 = CARTESIAN_POINT('',(175.19165,-93.8231,1.585)); +#180703 = VERTEX_POINT('',#180704); +#180704 = CARTESIAN_POINT('',(175.19165,-75.8831,1.585)); +#180705 = LINE('',#180706,#180707); +#180706 = CARTESIAN_POINT('',(175.19165,-93.8231,1.585)); +#180707 = VECTOR('',#180708,1.); +#180708 = DIRECTION('',(0.,1.,0.)); +#180709 = ORIENTED_EDGE('',*,*,#180710,.T.); +#180710 = EDGE_CURVE('',#180703,#180711,#180713,.T.); +#180711 = VERTEX_POINT('',#180712); +#180712 = CARTESIAN_POINT('',(173.19165,-75.8831,1.585)); +#180713 = LINE('',#180714,#180715); +#180714 = CARTESIAN_POINT('',(175.19165,-75.8831,1.585)); +#180715 = VECTOR('',#180716,1.); +#180716 = DIRECTION('',(-1.,0.,0.)); +#180717 = ORIENTED_EDGE('',*,*,#180718,.T.); +#180718 = EDGE_CURVE('',#180711,#180719,#180721,.T.); +#180719 = VERTEX_POINT('',#180720); +#180720 = CARTESIAN_POINT('',(173.19165,-93.8231,1.585)); +#180721 = LINE('',#180722,#180723); +#180722 = CARTESIAN_POINT('',(173.19165,-75.8831,1.585)); +#180723 = VECTOR('',#180724,1.); +#180724 = DIRECTION('',(0.,-1.,0.)); +#180725 = ORIENTED_EDGE('',*,*,#180726,.T.); +#180726 = EDGE_CURVE('',#180719,#180701,#180727,.T.); +#180727 = LINE('',#180728,#180729); +#180728 = CARTESIAN_POINT('',(173.19165,-93.8231,1.585)); +#180729 = VECTOR('',#180730,1.); +#180730 = DIRECTION('',(1.,0.,0.)); +#180731 = PLANE('',#180732); +#180732 = AXIS2_PLACEMENT_3D('',#180733,#180734,#180735); +#180733 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180734 = DIRECTION('',(0.,0.,1.)); +#180735 = DIRECTION('',(1.,0.,-0.)); +#180736 = SHELL_BASED_SURFACE_MODEL('',(#180737)); +#180737 = OPEN_SHELL('',(#180738)); +#180738 = ADVANCED_FACE('',(#180739,#180809),#180843,.T.); +#180739 = FACE_BOUND('',#180740,.F.); +#180740 = EDGE_LOOP('',(#180741,#180752,#180760,#180769,#180777,#180786, + #180794,#180803)); +#180741 = ORIENTED_EDGE('',*,*,#180742,.T.); +#180742 = EDGE_CURVE('',#180743,#180745,#180747,.T.); +#180743 = VERTEX_POINT('',#180744); +#180744 = CARTESIAN_POINT('',(195.42165,-75.8231,1.585)); +#180745 = VERTEX_POINT('',#180746); +#180746 = CARTESIAN_POINT('',(195.48165,-75.7631,1.585)); +#180747 = CIRCLE('',#180748,5.999932016265E-02); +#180748 = AXIS2_PLACEMENT_3D('',#180749,#180750,#180751); +#180749 = CARTESIAN_POINT('',(195.48164932015,-75.82309932015,1.585)); +#180750 = DIRECTION('',(0.,0.,-1.)); +#180751 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#180752 = ORIENTED_EDGE('',*,*,#180753,.T.); +#180753 = EDGE_CURVE('',#180745,#180754,#180756,.T.); +#180754 = VERTEX_POINT('',#180755); +#180755 = CARTESIAN_POINT('',(197.60165,-75.7631,1.585)); +#180756 = LINE('',#180757,#180758); +#180757 = CARTESIAN_POINT('',(195.48165,-75.7631,1.585)); +#180758 = VECTOR('',#180759,1.); +#180759 = DIRECTION('',(1.,0.,0.)); +#180760 = ORIENTED_EDGE('',*,*,#180761,.T.); +#180761 = EDGE_CURVE('',#180754,#180762,#180764,.T.); +#180762 = VERTEX_POINT('',#180763); +#180763 = CARTESIAN_POINT('',(197.66165,-75.8231,1.585)); +#180764 = CIRCLE('',#180765,5.999932016264E-02); +#180765 = AXIS2_PLACEMENT_3D('',#180766,#180767,#180768); +#180766 = CARTESIAN_POINT('',(197.60165067984,-75.82309932015,1.585)); +#180767 = DIRECTION('',(0.,0.,-1.)); +#180768 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#180769 = ORIENTED_EDGE('',*,*,#180770,.T.); +#180770 = EDGE_CURVE('',#180762,#180771,#180773,.T.); +#180771 = VERTEX_POINT('',#180772); +#180772 = CARTESIAN_POINT('',(197.66165,-93.8831,1.585)); +#180773 = LINE('',#180774,#180775); +#180774 = CARTESIAN_POINT('',(197.66165,-75.8231,1.585)); +#180775 = VECTOR('',#180776,1.); +#180776 = DIRECTION('',(0.,-1.,0.)); +#180777 = ORIENTED_EDGE('',*,*,#180778,.T.); +#180778 = EDGE_CURVE('',#180771,#180779,#180781,.T.); +#180779 = VERTEX_POINT('',#180780); +#180780 = CARTESIAN_POINT('',(197.60165,-93.9431,1.585)); +#180781 = CIRCLE('',#180782,5.999932016265E-02); +#180782 = AXIS2_PLACEMENT_3D('',#180783,#180784,#180785); +#180783 = CARTESIAN_POINT('',(197.60165067984,-93.88310067984,1.585)); +#180784 = DIRECTION('',(0.,0.,-1.)); +#180785 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#180786 = ORIENTED_EDGE('',*,*,#180787,.T.); +#180787 = EDGE_CURVE('',#180779,#180788,#180790,.T.); +#180788 = VERTEX_POINT('',#180789); +#180789 = CARTESIAN_POINT('',(195.48165,-93.9431,1.585)); +#180790 = LINE('',#180791,#180792); +#180791 = CARTESIAN_POINT('',(197.60165,-93.9431,1.585)); +#180792 = VECTOR('',#180793,1.); +#180793 = DIRECTION('',(-1.,0.,0.)); +#180794 = ORIENTED_EDGE('',*,*,#180795,.T.); +#180795 = EDGE_CURVE('',#180788,#180796,#180798,.T.); +#180796 = VERTEX_POINT('',#180797); +#180797 = CARTESIAN_POINT('',(195.42165,-93.8831,1.585)); +#180798 = CIRCLE('',#180799,5.999932016256E-02); +#180799 = AXIS2_PLACEMENT_3D('',#180800,#180801,#180802); +#180800 = CARTESIAN_POINT('',(195.48164932015,-93.88310067984,1.585)); +#180801 = DIRECTION('',(0.,0.,-1.)); +#180802 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#180803 = ORIENTED_EDGE('',*,*,#180804,.T.); +#180804 = EDGE_CURVE('',#180796,#180743,#180805,.T.); +#180805 = LINE('',#180806,#180807); +#180806 = CARTESIAN_POINT('',(195.42165,-93.8831,1.585)); +#180807 = VECTOR('',#180808,1.); +#180808 = DIRECTION('',(0.,1.,0.)); +#180809 = FACE_BOUND('',#180810,.F.); +#180810 = EDGE_LOOP('',(#180811,#180821,#180829,#180837)); +#180811 = ORIENTED_EDGE('',*,*,#180812,.T.); +#180812 = EDGE_CURVE('',#180813,#180815,#180817,.T.); +#180813 = VERTEX_POINT('',#180814); +#180814 = CARTESIAN_POINT('',(197.54165,-93.8231,1.585)); +#180815 = VERTEX_POINT('',#180816); +#180816 = CARTESIAN_POINT('',(197.54165,-75.8831,1.585)); +#180817 = LINE('',#180818,#180819); +#180818 = CARTESIAN_POINT('',(197.54165,-93.8231,1.585)); +#180819 = VECTOR('',#180820,1.); +#180820 = DIRECTION('',(0.,1.,0.)); +#180821 = ORIENTED_EDGE('',*,*,#180822,.T.); +#180822 = EDGE_CURVE('',#180815,#180823,#180825,.T.); +#180823 = VERTEX_POINT('',#180824); +#180824 = CARTESIAN_POINT('',(195.54165,-75.8831,1.585)); +#180825 = LINE('',#180826,#180827); +#180826 = CARTESIAN_POINT('',(197.54165,-75.8831,1.585)); +#180827 = VECTOR('',#180828,1.); +#180828 = DIRECTION('',(-1.,0.,0.)); +#180829 = ORIENTED_EDGE('',*,*,#180830,.T.); +#180830 = EDGE_CURVE('',#180823,#180831,#180833,.T.); +#180831 = VERTEX_POINT('',#180832); +#180832 = CARTESIAN_POINT('',(195.54165,-93.8231,1.585)); +#180833 = LINE('',#180834,#180835); +#180834 = CARTESIAN_POINT('',(195.54165,-75.8831,1.585)); +#180835 = VECTOR('',#180836,1.); +#180836 = DIRECTION('',(0.,-1.,0.)); +#180837 = ORIENTED_EDGE('',*,*,#180838,.T.); +#180838 = EDGE_CURVE('',#180831,#180813,#180839,.T.); +#180839 = LINE('',#180840,#180841); +#180840 = CARTESIAN_POINT('',(195.54165,-93.8231,1.585)); +#180841 = VECTOR('',#180842,1.); +#180842 = DIRECTION('',(1.,0.,0.)); +#180843 = PLANE('',#180844); +#180844 = AXIS2_PLACEMENT_3D('',#180845,#180846,#180847); +#180845 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180846 = DIRECTION('',(0.,0.,1.)); +#180847 = DIRECTION('',(1.,0.,-0.)); +#180848 = SHELL_BASED_SURFACE_MODEL('',(#180849)); +#180849 = OPEN_SHELL('',(#180850)); +#180850 = ADVANCED_FACE('',(#180851),#180887,.T.); +#180851 = FACE_BOUND('',#180852,.F.); +#180852 = EDGE_LOOP('',(#180853,#180864,#180872,#180881)); +#180853 = ORIENTED_EDGE('',*,*,#180854,.T.); +#180854 = EDGE_CURVE('',#180855,#180857,#180859,.T.); +#180855 = VERTEX_POINT('',#180856); +#180856 = CARTESIAN_POINT('',(93.954392,-93.8606,1.585)); +#180857 = VERTEX_POINT('',#180858); +#180858 = CARTESIAN_POINT('',(93.954392,-93.7406,1.585)); +#180859 = CIRCLE('',#180860,6.000000000042E-02); +#180860 = AXIS2_PLACEMENT_3D('',#180861,#180862,#180863); +#180861 = CARTESIAN_POINT('',(93.954391774412,-93.8006,1.585)); +#180862 = DIRECTION('',(0.,0.,-1.)); +#180863 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#180864 = ORIENTED_EDGE('',*,*,#180865,.T.); +#180865 = EDGE_CURVE('',#180857,#180866,#180868,.T.); +#180866 = VERTEX_POINT('',#180867); +#180867 = CARTESIAN_POINT('',(94.428908,-93.7406,1.585)); +#180868 = LINE('',#180869,#180870); +#180869 = CARTESIAN_POINT('',(93.954392,-93.7406,1.585)); +#180870 = VECTOR('',#180871,1.); +#180871 = DIRECTION('',(1.,0.,0.)); +#180872 = ORIENTED_EDGE('',*,*,#180873,.T.); +#180873 = EDGE_CURVE('',#180866,#180874,#180876,.T.); +#180874 = VERTEX_POINT('',#180875); +#180875 = CARTESIAN_POINT('',(94.428908,-93.8606,1.585)); +#180876 = CIRCLE('',#180877,6.000000000043E-02); +#180877 = AXIS2_PLACEMENT_3D('',#180878,#180879,#180880); +#180878 = CARTESIAN_POINT('',(94.428908225588,-93.8006,1.585)); +#180879 = DIRECTION('',(0.,0.,-1.)); +#180880 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#180881 = ORIENTED_EDGE('',*,*,#180882,.T.); +#180882 = EDGE_CURVE('',#180874,#180855,#180883,.T.); +#180883 = LINE('',#180884,#180885); +#180884 = CARTESIAN_POINT('',(94.428908,-93.8606,1.585)); +#180885 = VECTOR('',#180886,1.); +#180886 = DIRECTION('',(-1.,0.,0.)); +#180887 = PLANE('',#180888); +#180888 = AXIS2_PLACEMENT_3D('',#180889,#180890,#180891); +#180889 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180890 = DIRECTION('',(0.,0.,1.)); +#180891 = DIRECTION('',(1.,0.,-0.)); +#180892 = SHELL_BASED_SURFACE_MODEL('',(#180893)); +#180893 = OPEN_SHELL('',(#180894)); +#180894 = ADVANCED_FACE('',(#180895),#180931,.T.); +#180895 = FACE_BOUND('',#180896,.F.); +#180896 = EDGE_LOOP('',(#180897,#180908,#180916,#180925)); +#180897 = ORIENTED_EDGE('',*,*,#180898,.T.); +#180898 = EDGE_CURVE('',#180899,#180901,#180903,.T.); +#180899 = VERTEX_POINT('',#180900); +#180900 = CARTESIAN_POINT('',(98.954392,-93.8606,1.585)); +#180901 = VERTEX_POINT('',#180902); +#180902 = CARTESIAN_POINT('',(98.954392,-93.7406,1.585)); +#180903 = CIRCLE('',#180904,6.000000000042E-02); +#180904 = AXIS2_PLACEMENT_3D('',#180905,#180906,#180907); +#180905 = CARTESIAN_POINT('',(98.954391774412,-93.8006,1.585)); +#180906 = DIRECTION('',(0.,0.,-1.)); +#180907 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#180908 = ORIENTED_EDGE('',*,*,#180909,.T.); +#180909 = EDGE_CURVE('',#180901,#180910,#180912,.T.); +#180910 = VERTEX_POINT('',#180911); +#180911 = CARTESIAN_POINT('',(99.428908,-93.7406,1.585)); +#180912 = LINE('',#180913,#180914); +#180913 = CARTESIAN_POINT('',(98.954392,-93.7406,1.585)); +#180914 = VECTOR('',#180915,1.); +#180915 = DIRECTION('',(1.,0.,0.)); +#180916 = ORIENTED_EDGE('',*,*,#180917,.T.); +#180917 = EDGE_CURVE('',#180910,#180918,#180920,.T.); +#180918 = VERTEX_POINT('',#180919); +#180919 = CARTESIAN_POINT('',(99.428908,-93.8606,1.585)); +#180920 = CIRCLE('',#180921,6.000000000043E-02); +#180921 = AXIS2_PLACEMENT_3D('',#180922,#180923,#180924); +#180922 = CARTESIAN_POINT('',(99.428908225588,-93.8006,1.585)); +#180923 = DIRECTION('',(0.,0.,-1.)); +#180924 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#180925 = ORIENTED_EDGE('',*,*,#180926,.T.); +#180926 = EDGE_CURVE('',#180918,#180899,#180927,.T.); +#180927 = LINE('',#180928,#180929); +#180928 = CARTESIAN_POINT('',(99.428908,-93.8606,1.585)); +#180929 = VECTOR('',#180930,1.); +#180930 = DIRECTION('',(-1.,0.,0.)); +#180931 = PLANE('',#180932); +#180932 = AXIS2_PLACEMENT_3D('',#180933,#180934,#180935); +#180933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180934 = DIRECTION('',(0.,0.,1.)); +#180935 = DIRECTION('',(1.,0.,-0.)); +#180936 = SHELL_BASED_SURFACE_MODEL('',(#180937)); +#180937 = OPEN_SHELL('',(#180938)); +#180938 = ADVANCED_FACE('',(#180939),#181217,.T.); +#180939 = FACE_BOUND('',#180940,.F.); +#180940 = EDGE_LOOP('',(#180941,#180951,#180959,#180967,#180975,#180984, + #180992,#181001,#181009,#181017,#181025,#181033,#181041,#181049, + #181057,#181065,#181073,#181081,#181089,#181097,#181105,#181113, + #181122,#181130,#181139,#181147,#181155,#181163,#181171,#181179, + #181187,#181195,#181203,#181211)); +#180941 = ORIENTED_EDGE('',*,*,#180942,.T.); +#180942 = EDGE_CURVE('',#180943,#180945,#180947,.T.); +#180943 = VERTEX_POINT('',#180944); +#180944 = CARTESIAN_POINT('',(96.885563,-93.16387,1.585)); +#180945 = VERTEX_POINT('',#180946); +#180946 = CARTESIAN_POINT('',(96.99971,-93.109774,1.585)); +#180947 = LINE('',#180948,#180949); +#180948 = CARTESIAN_POINT('',(96.885563,-93.16387,1.585)); +#180949 = VECTOR('',#180950,1.); +#180950 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#180951 = ORIENTED_EDGE('',*,*,#180952,.T.); +#180952 = EDGE_CURVE('',#180945,#180953,#180955,.T.); +#180953 = VERTEX_POINT('',#180954); +#180954 = CARTESIAN_POINT('',(97.076593,-93.109774,1.585)); +#180955 = LINE('',#180956,#180957); +#180956 = CARTESIAN_POINT('',(96.99971,-93.109774,1.585)); +#180957 = VECTOR('',#180958,1.); +#180958 = DIRECTION('',(1.,0.,0.)); +#180959 = ORIENTED_EDGE('',*,*,#180960,.T.); +#180960 = EDGE_CURVE('',#180953,#180961,#180963,.T.); +#180961 = VERTEX_POINT('',#180962); +#180962 = CARTESIAN_POINT('',(97.203183,-93.171702,1.585)); +#180963 = LINE('',#180964,#180965); +#180964 = CARTESIAN_POINT('',(97.076593,-93.109774,1.585)); +#180965 = VECTOR('',#180966,1.); +#180966 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#180967 = ORIENTED_EDGE('',*,*,#180968,.T.); +#180968 = EDGE_CURVE('',#180961,#180969,#180971,.T.); +#180969 = VERTEX_POINT('',#180970); +#180970 = CARTESIAN_POINT('',(97.224282,-93.197411,1.585)); +#180971 = LINE('',#180972,#180973); +#180972 = CARTESIAN_POINT('',(97.203183,-93.171702,1.585)); +#180973 = VECTOR('',#180974,1.); +#180974 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#180975 = ORIENTED_EDGE('',*,*,#180976,.T.); +#180976 = EDGE_CURVE('',#180969,#180977,#180979,.T.); +#180977 = VERTEX_POINT('',#180978); +#180978 = CARTESIAN_POINT('',(97.21645,-93.657888,1.585)); +#180979 = CIRCLE('',#180980,0.396588066051); +#180980 = AXIS2_PLACEMENT_3D('',#180981,#180982,#180983); +#180981 = CARTESIAN_POINT('',(96.897524180083,-93.42215846107,1.585)); +#180982 = DIRECTION('',(0.,0.,-1.)); +#180983 = DIRECTION('',(0.82392247243,0.566702531691,0.)); +#180984 = ORIENTED_EDGE('',*,*,#180985,.T.); +#180985 = EDGE_CURVE('',#180977,#180986,#180988,.T.); +#180986 = VERTEX_POINT('',#180987); +#180987 = CARTESIAN_POINT('',(97.194342,-93.677061,1.585)); +#180988 = LINE('',#180989,#180990); +#180989 = CARTESIAN_POINT('',(97.21645,-93.657888,1.585)); +#180990 = VECTOR('',#180991,1.); +#180991 = DIRECTION('',(-0.755473689205,-0.655178986934,0.)); +#180992 = ORIENTED_EDGE('',*,*,#180993,.T.); +#180993 = EDGE_CURVE('',#180986,#180994,#180996,.T.); +#180994 = VERTEX_POINT('',#180995); +#180995 = CARTESIAN_POINT('',(97.090118,-93.578363,1.585)); +#180996 = CIRCLE('',#180997,7.499954050663E-02); +#180997 = AXIS2_PLACEMENT_3D('',#180998,#180999,#181000); +#180998 = CARTESIAN_POINT('',(97.1571991799,-93.61190471103,1.585)); +#180999 = DIRECTION('',(0.,0.,-1.)); +#181000 = DIRECTION('',(0.495240635459,-0.868755841989,0.)); +#181001 = ORIENTED_EDGE('',*,*,#181002,.T.); +#181002 = EDGE_CURVE('',#180994,#181003,#181005,.T.); +#181003 = VERTEX_POINT('',#181004); +#181004 = CARTESIAN_POINT('',(97.129819,-93.498961,1.585)); +#181005 = LINE('',#181006,#181007); +#181006 = CARTESIAN_POINT('',(97.090118,-93.578363,1.585)); +#181007 = VECTOR('',#181008,1.); +#181008 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#181009 = ORIENTED_EDGE('',*,*,#181010,.T.); +#181010 = EDGE_CURVE('',#181003,#181011,#181013,.T.); +#181011 = VERTEX_POINT('',#181012); +#181012 = CARTESIAN_POINT('',(97.129819,-93.343895,1.585)); +#181013 = LINE('',#181014,#181015); +#181014 = CARTESIAN_POINT('',(97.129819,-93.498961,1.585)); +#181015 = VECTOR('',#181016,1.); +#181016 = DIRECTION('',(0.,1.,0.)); +#181017 = ORIENTED_EDGE('',*,*,#181018,.T.); +#181018 = EDGE_CURVE('',#181011,#181019,#181021,.T.); +#181019 = VERTEX_POINT('',#181020); +#181020 = CARTESIAN_POINT('',(97.101298,-93.286853,1.585)); +#181021 = LINE('',#181022,#181023); +#181022 = CARTESIAN_POINT('',(97.129819,-93.343895,1.585)); +#181023 = VECTOR('',#181024,1.); +#181024 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#181025 = ORIENTED_EDGE('',*,*,#181026,.T.); +#181026 = EDGE_CURVE('',#181019,#181027,#181029,.T.); +#181027 = VERTEX_POINT('',#181028); +#181028 = CARTESIAN_POINT('',(97.044256,-93.258333,1.585)); +#181029 = LINE('',#181030,#181031); +#181030 = CARTESIAN_POINT('',(97.101298,-93.286853,1.585)); +#181031 = VECTOR('',#181032,1.); +#181032 = DIRECTION('',(-0.894433463016,0.447201051247,0.)); +#181033 = ORIENTED_EDGE('',*,*,#181034,.T.); +#181034 = EDGE_CURVE('',#181027,#181035,#181037,.T.); +#181035 = VERTEX_POINT('',#181036); +#181036 = CARTESIAN_POINT('',(97.032047,-93.258333,1.585)); +#181037 = LINE('',#181038,#181039); +#181038 = CARTESIAN_POINT('',(97.044256,-93.258333,1.585)); +#181039 = VECTOR('',#181040,1.); +#181040 = DIRECTION('',(-1.,0.,0.)); +#181041 = ORIENTED_EDGE('',*,*,#181042,.T.); +#181042 = EDGE_CURVE('',#181035,#181043,#181045,.T.); +#181043 = VERTEX_POINT('',#181044); +#181044 = CARTESIAN_POINT('',(96.975005,-93.286853,1.585)); +#181045 = LINE('',#181046,#181047); +#181046 = CARTESIAN_POINT('',(97.032047,-93.258333,1.585)); +#181047 = VECTOR('',#181048,1.); +#181048 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#181049 = ORIENTED_EDGE('',*,*,#181050,.T.); +#181050 = EDGE_CURVE('',#181043,#181051,#181053,.T.); +#181051 = VERTEX_POINT('',#181052); +#181052 = CARTESIAN_POINT('',(96.946485,-93.343895,1.585)); +#181053 = LINE('',#181054,#181055); +#181054 = CARTESIAN_POINT('',(96.975005,-93.286853,1.585)); +#181055 = VECTOR('',#181056,1.); +#181056 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#181057 = ORIENTED_EDGE('',*,*,#181058,.T.); +#181058 = EDGE_CURVE('',#181051,#181059,#181061,.T.); +#181059 = VERTEX_POINT('',#181060); +#181060 = CARTESIAN_POINT('',(96.943822,-93.488857,1.585)); +#181061 = LINE('',#181062,#181063); +#181062 = CARTESIAN_POINT('',(96.946485,-93.343895,1.585)); +#181063 = VECTOR('',#181064,1.); +#181064 = DIRECTION('',(-1.836723261002E-02,-0.999831308155,0.)); +#181065 = ORIENTED_EDGE('',*,*,#181066,.T.); +#181066 = EDGE_CURVE('',#181059,#181067,#181069,.T.); +#181067 = VERTEX_POINT('',#181068); +#181068 = CARTESIAN_POINT('',(96.883116,-93.610269,1.585)); +#181069 = LINE('',#181070,#181071); +#181070 = CARTESIAN_POINT('',(96.943822,-93.488857,1.585)); +#181071 = VECTOR('',#181072,1.); +#181072 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#181073 = ORIENTED_EDGE('',*,*,#181074,.T.); +#181074 = EDGE_CURVE('',#181067,#181075,#181077,.T.); +#181075 = VERTEX_POINT('',#181076); +#181076 = CARTESIAN_POINT('',(96.857407,-93.631367,1.585)); +#181077 = LINE('',#181078,#181079); +#181078 = CARTESIAN_POINT('',(96.883116,-93.610269,1.585)); +#181079 = VECTOR('',#181080,1.); +#181080 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#181081 = ORIENTED_EDGE('',*,*,#181082,.T.); +#181082 = EDGE_CURVE('',#181075,#181083,#181085,.T.); +#181083 = VERTEX_POINT('',#181084); +#181084 = CARTESIAN_POINT('',(96.74326,-93.685463,1.585)); +#181085 = LINE('',#181086,#181087); +#181086 = CARTESIAN_POINT('',(96.857407,-93.631367,1.585)); +#181087 = VECTOR('',#181088,1.); +#181088 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#181089 = ORIENTED_EDGE('',*,*,#181090,.T.); +#181090 = EDGE_CURVE('',#181083,#181091,#181093,.T.); +#181091 = VERTEX_POINT('',#181092); +#181092 = CARTESIAN_POINT('',(96.661199,-93.684241,1.585)); +#181093 = LINE('',#181094,#181095); +#181094 = CARTESIAN_POINT('',(96.74326,-93.685463,1.585)); +#181095 = VECTOR('',#181096,1.); +#181096 = DIRECTION('',(-0.999889142116,1.488971047957E-02,0.)); +#181097 = ORIENTED_EDGE('',*,*,#181098,.T.); +#181098 = EDGE_CURVE('',#181091,#181099,#181101,.T.); +#181099 = VERTEX_POINT('',#181100); +#181100 = CARTESIAN_POINT('',(96.539787,-93.623535,1.585)); +#181101 = LINE('',#181102,#181103); +#181102 = CARTESIAN_POINT('',(96.661199,-93.684241,1.585)); +#181103 = VECTOR('',#181104,1.); +#181104 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#181105 = ORIENTED_EDGE('',*,*,#181106,.T.); +#181106 = EDGE_CURVE('',#181099,#181107,#181109,.T.); +#181107 = VERTEX_POINT('',#181108); +#181108 = CARTESIAN_POINT('',(96.518689,-93.597826,1.585)); +#181109 = LINE('',#181110,#181111); +#181110 = CARTESIAN_POINT('',(96.539787,-93.623535,1.585)); +#181111 = VECTOR('',#181112,1.); +#181112 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#181113 = ORIENTED_EDGE('',*,*,#181114,.T.); +#181114 = EDGE_CURVE('',#181107,#181115,#181117,.T.); +#181115 = VERTEX_POINT('',#181116); +#181116 = CARTESIAN_POINT('',(96.526521,-93.184968,1.585)); +#181117 = CIRCLE('',#181118,0.342521496488); +#181118 = AXIS2_PLACEMENT_3D('',#181119,#181120,#181121); +#181119 = CARTESIAN_POINT('',(96.795855505158,-93.3965806175,1.585)); +#181120 = DIRECTION('',(0.,0.,-1.)); +#181121 = DIRECTION('',(-0.809194482681,-0.587540883002,-0.)); +#181122 = ORIENTED_EDGE('',*,*,#181123,.T.); +#181123 = EDGE_CURVE('',#181115,#181124,#181126,.T.); +#181124 = VERTEX_POINT('',#181125); +#181125 = CARTESIAN_POINT('',(96.548629,-93.165795,1.585)); +#181126 = LINE('',#181127,#181128); +#181127 = CARTESIAN_POINT('',(96.526521,-93.184968,1.585)); +#181128 = VECTOR('',#181129,1.); +#181129 = DIRECTION('',(0.755473689205,0.655178986933,0.)); +#181130 = ORIENTED_EDGE('',*,*,#181131,.T.); +#181131 = EDGE_CURVE('',#181124,#181132,#181134,.T.); +#181132 = VERTEX_POINT('',#181133); +#181133 = CARTESIAN_POINT('',(96.652853,-93.264493,1.585)); +#181134 = CIRCLE('',#181135,7.499986582492E-02); +#181135 = AXIS2_PLACEMENT_3D('',#181136,#181137,#181138); +#181136 = CARTESIAN_POINT('',(96.585771049506,-93.2309521027,1.585)); +#181137 = DIRECTION('',(0.,0.,-1.)); +#181138 = DIRECTION('',(-0.495228212713,0.868762923549,0.)); +#181139 = ORIENTED_EDGE('',*,*,#181140,.T.); +#181140 = EDGE_CURVE('',#181132,#181141,#181143,.T.); +#181141 = VERTEX_POINT('',#181142); +#181142 = CARTESIAN_POINT('',(96.613152,-93.343895,1.585)); +#181143 = LINE('',#181144,#181145); +#181144 = CARTESIAN_POINT('',(96.652853,-93.264493,1.585)); +#181145 = VECTOR('',#181146,1.); +#181146 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#181147 = ORIENTED_EDGE('',*,*,#181148,.T.); +#181148 = EDGE_CURVE('',#181141,#181149,#181151,.T.); +#181149 = VERTEX_POINT('',#181150); +#181150 = CARTESIAN_POINT('',(96.613152,-93.451342,1.585)); +#181151 = LINE('',#181152,#181153); +#181152 = CARTESIAN_POINT('',(96.613152,-93.343895,1.585)); +#181153 = VECTOR('',#181154,1.); +#181154 = DIRECTION('',(0.,-1.,0.)); +#181155 = ORIENTED_EDGE('',*,*,#181156,.T.); +#181156 = EDGE_CURVE('',#181149,#181157,#181159,.T.); +#181157 = VERTEX_POINT('',#181158); +#181158 = CARTESIAN_POINT('',(96.641672,-93.508383,1.585)); +#181159 = LINE('',#181160,#181161); +#181160 = CARTESIAN_POINT('',(96.613152,-93.451342,1.585)); +#181161 = VECTOR('',#181162,1.); +#181162 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#181163 = ORIENTED_EDGE('',*,*,#181164,.T.); +#181164 = EDGE_CURVE('',#181157,#181165,#181167,.T.); +#181165 = VERTEX_POINT('',#181166); +#181166 = CARTESIAN_POINT('',(96.698714,-93.536904,1.585)); +#181167 = LINE('',#181168,#181169); +#181168 = CARTESIAN_POINT('',(96.641672,-93.508383,1.585)); +#181169 = VECTOR('',#181170,1.); +#181170 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#181171 = ORIENTED_EDGE('',*,*,#181172,.T.); +#181172 = EDGE_CURVE('',#181165,#181173,#181175,.T.); +#181173 = VERTEX_POINT('',#181174); +#181174 = CARTESIAN_POINT('',(96.710923,-93.536904,1.585)); +#181175 = LINE('',#181176,#181177); +#181176 = CARTESIAN_POINT('',(96.698714,-93.536904,1.585)); +#181177 = VECTOR('',#181178,1.); +#181178 = DIRECTION('',(1.,0.,0.)); +#181179 = ORIENTED_EDGE('',*,*,#181180,.T.); +#181180 = EDGE_CURVE('',#181173,#181181,#181183,.T.); +#181181 = VERTEX_POINT('',#181182); +#181182 = CARTESIAN_POINT('',(96.767964,-93.508383,1.585)); +#181183 = LINE('',#181184,#181185); +#181184 = CARTESIAN_POINT('',(96.710923,-93.536904,1.585)); +#181185 = VECTOR('',#181186,1.); +#181186 = DIRECTION('',(0.894424054904,0.447219867638,0.)); +#181187 = ORIENTED_EDGE('',*,*,#181188,.T.); +#181188 = EDGE_CURVE('',#181181,#181189,#181191,.T.); +#181189 = VERTEX_POINT('',#181190); +#181190 = CARTESIAN_POINT('',(96.796485,-93.451342,1.585)); +#181191 = LINE('',#181192,#181193); +#181192 = CARTESIAN_POINT('',(96.767964,-93.508383,1.585)); +#181193 = VECTOR('',#181194,1.); +#181194 = DIRECTION('',(0.447219867637,0.894424054904,0.)); +#181195 = ORIENTED_EDGE('',*,*,#181196,.T.); +#181196 = EDGE_CURVE('',#181189,#181197,#181199,.T.); +#181197 = VERTEX_POINT('',#181198); +#181198 = CARTESIAN_POINT('',(96.799148,-93.306381,1.585)); +#181199 = LINE('',#181200,#181201); +#181200 = CARTESIAN_POINT('',(96.796485,-93.451342,1.585)); +#181201 = VECTOR('',#181202,1.); +#181202 = DIRECTION('',(1.836735927193E-02,0.999831305828,0.)); +#181203 = ORIENTED_EDGE('',*,*,#181204,.T.); +#181204 = EDGE_CURVE('',#181197,#181205,#181207,.T.); +#181205 = VERTEX_POINT('',#181206); +#181206 = CARTESIAN_POINT('',(96.859854,-93.184968,1.585)); +#181207 = LINE('',#181208,#181209); +#181208 = CARTESIAN_POINT('',(96.799148,-93.306381,1.585)); +#181209 = VECTOR('',#181210,1.); +#181210 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#181211 = ORIENTED_EDGE('',*,*,#181212,.T.); +#181212 = EDGE_CURVE('',#181205,#180943,#181213,.T.); +#181213 = LINE('',#181214,#181215); +#181214 = CARTESIAN_POINT('',(96.859854,-93.184968,1.585)); +#181215 = VECTOR('',#181216,1.); +#181216 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#181217 = PLANE('',#181218); +#181218 = AXIS2_PLACEMENT_3D('',#181219,#181220,#181221); +#181219 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181220 = DIRECTION('',(0.,0.,1.)); +#181221 = DIRECTION('',(1.,0.,-0.)); +#181222 = SHELL_BASED_SURFACE_MODEL('',(#181223)); +#181223 = OPEN_SHELL('',(#181224)); +#181224 = ADVANCED_FACE('',(#181225),#181311,.T.); +#181225 = FACE_BOUND('',#181226,.F.); +#181226 = EDGE_LOOP('',(#181227,#181238,#181246,#181254,#181263,#181271, + #181280,#181288,#181297,#181305)); +#181227 = ORIENTED_EDGE('',*,*,#181228,.T.); +#181228 = EDGE_CURVE('',#181229,#181231,#181233,.T.); +#181229 = VERTEX_POINT('',#181230); +#181230 = CARTESIAN_POINT('',(140.513686,-92.626918,1.585)); +#181231 = VERTEX_POINT('',#181232); +#181232 = CARTESIAN_POINT('',(140.626286,-92.60452,1.585)); +#181233 = CIRCLE('',#181234,0.150003237278); +#181234 = AXIS2_PLACEMENT_3D('',#181235,#181236,#181237); +#181235 = CARTESIAN_POINT('',(140.54294882175,-92.47979676272,1.585)); +#181236 = DIRECTION('',(0.,0.,1.)); +#181237 = DIRECTION('',(-0.195081268148,-0.980787081286,0.)); +#181238 = ORIENTED_EDGE('',*,*,#181239,.T.); +#181239 = EDGE_CURVE('',#181231,#181240,#181242,.T.); +#181240 = VERTEX_POINT('',#181241); +#181241 = CARTESIAN_POINT('',(140.632954,-92.597851,1.585)); +#181242 = LINE('',#181243,#181244); +#181243 = CARTESIAN_POINT('',(140.626286,-92.60452,1.585)); +#181244 = VECTOR('',#181245,1.); +#181245 = DIRECTION('',(0.707053760772,0.707159797626,0.)); +#181246 = ORIENTED_EDGE('',*,*,#181247,.T.); +#181247 = EDGE_CURVE('',#181240,#181248,#181250,.T.); +#181248 = VERTEX_POINT('',#181249); +#181249 = CARTESIAN_POINT('',(140.631116,-93.208666,1.585)); +#181250 = LINE('',#181251,#181252); +#181251 = CARTESIAN_POINT('',(140.632954,-92.597851,1.585)); +#181252 = VECTOR('',#181253,1.); +#181253 = DIRECTION('',(-3.009080783633E-03,-0.999995472706,0.)); +#181254 = ORIENTED_EDGE('',*,*,#181255,.T.); +#181255 = EDGE_CURVE('',#181248,#181256,#181258,.T.); +#181256 = VERTEX_POINT('',#181257); +#181257 = CARTESIAN_POINT('',(140.280007,-93.552189,1.585)); +#181258 = CIRCLE('',#181259,0.38184101318); +#181259 = AXIS2_PLACEMENT_3D('',#181260,#181261,#181262); +#181260 = CARTESIAN_POINT('',(140.25109350032,-93.17144424444,1.585)); +#181261 = DIRECTION('',(0.,0.,-1.)); +#181262 = DIRECTION('',(0.995237511316,-9.747972132576E-02,0.)); +#181263 = ORIENTED_EDGE('',*,*,#181264,.T.); +#181264 = EDGE_CURVE('',#181256,#181265,#181267,.T.); +#181265 = VERTEX_POINT('',#181266); +#181266 = CARTESIAN_POINT('',(140.162732,-93.551478,1.585)); +#181267 = LINE('',#181268,#181269); +#181268 = CARTESIAN_POINT('',(140.280007,-93.552189,1.585)); +#181269 = VECTOR('',#181270,1.); +#181270 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#181271 = ORIENTED_EDGE('',*,*,#181272,.T.); +#181272 = EDGE_CURVE('',#181265,#181273,#181275,.T.); +#181273 = VERTEX_POINT('',#181274); +#181274 = CARTESIAN_POINT('',(140.177364,-93.402919,1.585)); +#181275 = CIRCLE('',#181276,7.500006711464E-02); +#181276 = AXIS2_PLACEMENT_3D('',#181277,#181278,#181279); +#181277 = CARTESIAN_POINT('',(140.17736393288,-93.47791906711,1.585)); +#181278 = DIRECTION('',(0.,0.,-1.)); +#181279 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#181280 = ORIENTED_EDGE('',*,*,#181281,.T.); +#181281 = EDGE_CURVE('',#181273,#181282,#181284,.T.); +#181282 = VERTEX_POINT('',#181283); +#181283 = CARTESIAN_POINT('',(140.260432,-93.402919,1.585)); +#181284 = LINE('',#181285,#181286); +#181285 = CARTESIAN_POINT('',(140.177364,-93.402919,1.585)); +#181286 = VECTOR('',#181287,1.); +#181287 = DIRECTION('',(1.,0.,0.)); +#181288 = ORIENTED_EDGE('',*,*,#181289,.T.); +#181289 = EDGE_CURVE('',#181282,#181290,#181292,.T.); +#181290 = VERTEX_POINT('',#181291); +#181291 = CARTESIAN_POINT('',(140.483316,-93.180034,1.585)); +#181292 = CIRCLE('',#181293,0.239437351684); +#181293 = AXIS2_PLACEMENT_3D('',#181294,#181295,#181296); +#181294 = CARTESIAN_POINT('',(140.24441490658,-93.16401797844,1.585)); +#181295 = DIRECTION('',(0.,0.,1.)); +#181296 = DIRECTION('',(6.689471506024E-02,-0.997760039838,0.)); +#181297 = ORIENTED_EDGE('',*,*,#181298,.T.); +#181298 = EDGE_CURVE('',#181290,#181299,#181301,.T.); +#181299 = VERTEX_POINT('',#181300); +#181300 = CARTESIAN_POINT('',(140.484452,-92.614808,1.585)); +#181301 = LINE('',#181302,#181303); +#181302 = CARTESIAN_POINT('',(140.483316,-93.180034,1.585)); +#181303 = VECTOR('',#181304,1.); +#181304 = DIRECTION('',(2.009811483643E-03,0.999997980327,0.)); +#181305 = ORIENTED_EDGE('',*,*,#181306,.T.); +#181306 = EDGE_CURVE('',#181299,#181229,#181307,.T.); +#181307 = LINE('',#181308,#181309); +#181308 = CARTESIAN_POINT('',(140.484452,-92.614808,1.585)); +#181309 = VECTOR('',#181310,1.); +#181310 = DIRECTION('',(0.923869691774,-0.382707189142,0.)); +#181311 = PLANE('',#181312); +#181312 = AXIS2_PLACEMENT_3D('',#181313,#181314,#181315); +#181313 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181314 = DIRECTION('',(0.,0.,1.)); +#181315 = DIRECTION('',(1.,0.,-0.)); +#181316 = SHELL_BASED_SURFACE_MODEL('',(#181317)); +#181317 = OPEN_SHELL('',(#181318)); +#181318 = ADVANCED_FACE('',(#181319,#181397),#181449,.T.); +#181319 = FACE_BOUND('',#181320,.F.); +#181320 = EDGE_LOOP('',(#181321,#181332,#181340,#181349,#181357,#181366, + #181374,#181382,#181391)); +#181321 = ORIENTED_EDGE('',*,*,#181322,.T.); +#181322 = EDGE_CURVE('',#181323,#181325,#181327,.T.); +#181323 = VERTEX_POINT('',#181324); +#181324 = CARTESIAN_POINT('',(140.960948,-92.463287,1.585)); +#181325 = VERTEX_POINT('',#181326); +#181326 = CARTESIAN_POINT('',(141.034507,-92.402919,1.585)); +#181327 = CIRCLE('',#181328,7.500074938991E-02); +#181328 = AXIS2_PLACEMENT_3D('',#181329,#181330,#181331); +#181329 = CARTESIAN_POINT('',(141.03450746611,-92.47791974938,1.585)); +#181330 = DIRECTION('',(0.,0.,-1.)); +#181331 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#181332 = ORIENTED_EDGE('',*,*,#181333,.T.); +#181333 = EDGE_CURVE('',#181325,#181334,#181336,.T.); +#181334 = VERTEX_POINT('',#181335); +#181335 = CARTESIAN_POINT('',(141.430091,-92.40436,1.585)); +#181336 = LINE('',#181337,#181338); +#181337 = CARTESIAN_POINT('',(141.034507,-92.402919,1.585)); +#181338 = VECTOR('',#181339,1.); +#181339 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#181340 = ORIENTED_EDGE('',*,*,#181341,.T.); +#181341 = EDGE_CURVE('',#181334,#181342,#181344,.T.); +#181342 = VERTEX_POINT('',#181343); +#181343 = CARTESIAN_POINT('',(141.679494,-92.653763,1.585)); +#181344 = CIRCLE('',#181345,0.347870264855); +#181345 = AXIS2_PLACEMENT_3D('',#181346,#181347,#181348); +#181346 = CARTESIAN_POINT('',(141.34276326502,-92.74109073497,1.585)); +#181347 = DIRECTION('',(0.,0.,-1.)); +#181348 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#181349 = ORIENTED_EDGE('',*,*,#181350,.T.); +#181350 = EDGE_CURVE('',#181342,#181351,#181353,.T.); +#181351 = VERTEX_POINT('',#181352); +#181352 = CARTESIAN_POINT('',(141.678272,-92.831062,1.585)); +#181353 = LINE('',#181354,#181355); +#181354 = CARTESIAN_POINT('',(141.679494,-92.653763,1.585)); +#181355 = VECTOR('',#181356,1.); +#181356 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#181357 = ORIENTED_EDGE('',*,*,#181358,.T.); +#181358 = EDGE_CURVE('',#181351,#181359,#181361,.T.); +#181359 = VERTEX_POINT('',#181360); +#181360 = CARTESIAN_POINT('',(141.430091,-93.075287,1.585)); +#181361 = CIRCLE('',#181362,0.348632345849); +#181362 = AXIS2_PLACEMENT_3D('',#181363,#181364,#181365); +#181363 = CARTESIAN_POINT('',(141.34232219403,-92.7378834593,1.585)); +#181364 = DIRECTION('',(0.,0.,-1.)); +#181365 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#181366 = ORIENTED_EDGE('',*,*,#181367,.T.); +#181367 = EDGE_CURVE('',#181359,#181368,#181370,.T.); +#181368 = VERTEX_POINT('',#181369); +#181369 = CARTESIAN_POINT('',(141.109507,-93.076728,1.585)); +#181370 = LINE('',#181371,#181372); +#181371 = CARTESIAN_POINT('',(141.430091,-93.075287,1.585)); +#181372 = VECTOR('',#181373,1.); +#181373 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#181374 = ORIENTED_EDGE('',*,*,#181375,.T.); +#181375 = EDGE_CURVE('',#181368,#181376,#181378,.T.); +#181376 = VERTEX_POINT('',#181377); +#181377 = CARTESIAN_POINT('',(141.108066,-93.492551,1.585)); +#181378 = LINE('',#181379,#181380); +#181379 = CARTESIAN_POINT('',(141.109507,-93.076728,1.585)); +#181380 = VECTOR('',#181381,1.); +#181381 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#181382 = ORIENTED_EDGE('',*,*,#181383,.T.); +#181383 = EDGE_CURVE('',#181376,#181384,#181386,.T.); +#181384 = VERTEX_POINT('',#181385); +#181385 = CARTESIAN_POINT('',(140.959507,-93.477919,1.585)); +#181386 = CIRCLE('',#181387,7.500006711463E-02); +#181387 = AXIS2_PLACEMENT_3D('',#181388,#181389,#181390); +#181388 = CARTESIAN_POINT('',(141.03450706711,-93.47791906711,1.585)); +#181389 = DIRECTION('',(-0.,0.,-1.)); +#181390 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#181391 = ORIENTED_EDGE('',*,*,#181392,.T.); +#181392 = EDGE_CURVE('',#181384,#181323,#181393,.T.); +#181393 = LINE('',#181394,#181395); +#181394 = CARTESIAN_POINT('',(140.959507,-93.477919,1.585)); +#181395 = VECTOR('',#181396,1.); +#181396 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#181397 = FACE_BOUND('',#181398,.F.); +#181398 = EDGE_LOOP('',(#181399,#181410,#181418,#181426,#181434,#181443) + ); +#181399 = ORIENTED_EDGE('',*,*,#181400,.T.); +#181400 = EDGE_CURVE('',#181401,#181403,#181405,.T.); +#181401 = VERTEX_POINT('',#181402); +#181402 = CARTESIAN_POINT('',(141.530935,-92.6861,1.585)); +#181403 = VERTEX_POINT('',#181404); +#181404 = CARTESIAN_POINT('',(141.397754,-92.552919,1.585)); +#181405 = CIRCLE('',#181406,0.18686440374); +#181406 = AXIS2_PLACEMENT_3D('',#181407,#181408,#181409); +#181407 = CARTESIAN_POINT('',(141.350218,-92.733636,1.585)); +#181408 = DIRECTION('',(0.,0.,1.)); +#181409 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#181410 = ORIENTED_EDGE('',*,*,#181411,.T.); +#181411 = EDGE_CURVE('',#181403,#181412,#181414,.T.); +#181412 = VERTEX_POINT('',#181413); +#181413 = CARTESIAN_POINT('',(141.109507,-92.552919,1.585)); +#181414 = LINE('',#181415,#181416); +#181415 = CARTESIAN_POINT('',(141.397754,-92.552919,1.585)); +#181416 = VECTOR('',#181417,1.); +#181417 = DIRECTION('',(-1.,0.,0.)); +#181418 = ORIENTED_EDGE('',*,*,#181419,.T.); +#181419 = EDGE_CURVE('',#181412,#181420,#181422,.T.); +#181420 = VERTEX_POINT('',#181421); +#181421 = CARTESIAN_POINT('',(141.109507,-92.926728,1.585)); +#181422 = LINE('',#181423,#181424); +#181423 = CARTESIAN_POINT('',(141.109507,-92.552919,1.585)); +#181424 = VECTOR('',#181425,1.); +#181425 = DIRECTION('',(0.,-1.,0.)); +#181426 = ORIENTED_EDGE('',*,*,#181427,.T.); +#181427 = EDGE_CURVE('',#181420,#181428,#181430,.T.); +#181428 = VERTEX_POINT('',#181429); +#181429 = CARTESIAN_POINT('',(141.397754,-92.926728,1.585)); +#181430 = LINE('',#181431,#181432); +#181431 = CARTESIAN_POINT('',(141.109507,-92.926728,1.585)); +#181432 = VECTOR('',#181433,1.); +#181433 = DIRECTION('',(1.,0.,0.)); +#181434 = ORIENTED_EDGE('',*,*,#181435,.T.); +#181435 = EDGE_CURVE('',#181428,#181436,#181438,.T.); +#181436 = VERTEX_POINT('',#181437); +#181437 = CARTESIAN_POINT('',(141.530935,-92.793547,1.585)); +#181438 = CIRCLE('',#181439,0.18686440374); +#181439 = AXIS2_PLACEMENT_3D('',#181440,#181441,#181442); +#181440 = CARTESIAN_POINT('',(141.350218,-92.746011,1.585)); +#181441 = DIRECTION('',(0.,0.,1.)); +#181442 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#181443 = ORIENTED_EDGE('',*,*,#181444,.T.); +#181444 = EDGE_CURVE('',#181436,#181401,#181445,.T.); +#181445 = LINE('',#181446,#181447); +#181446 = CARTESIAN_POINT('',(141.530935,-92.793547,1.585)); +#181447 = VECTOR('',#181448,1.); +#181448 = DIRECTION('',(0.,1.,0.)); +#181449 = PLANE('',#181450); +#181450 = AXIS2_PLACEMENT_3D('',#181451,#181452,#181453); +#181451 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181452 = DIRECTION('',(0.,0.,1.)); +#181453 = DIRECTION('',(1.,0.,-0.)); +#181454 = SHELL_BASED_SURFACE_MODEL('',(#181455)); +#181455 = OPEN_SHELL('',(#181456)); +#181456 = ADVANCED_FACE('',(#181457),#181643,.T.); +#181457 = FACE_BOUND('',#181458,.F.); +#181458 = EDGE_LOOP('',(#181459,#181470,#181478,#181487,#181495,#181503, + #181512,#181520,#181529,#181537,#181545,#181553,#181562,#181570, + #181579,#181587,#181596,#181604,#181612,#181620,#181629,#181637)); +#181459 = ORIENTED_EDGE('',*,*,#181460,.T.); +#181460 = EDGE_CURVE('',#181461,#181463,#181465,.T.); +#181461 = VERTEX_POINT('',#181462); +#181462 = CARTESIAN_POINT('',(141.924637,-92.551478,1.585)); +#181463 = VERTEX_POINT('',#181464); +#181464 = CARTESIAN_POINT('',(141.939269,-92.402919,1.585)); +#181465 = CIRCLE('',#181466,7.500006711464E-02); +#181466 = AXIS2_PLACEMENT_3D('',#181467,#181468,#181469); +#181467 = CARTESIAN_POINT('',(141.93926893288,-92.47791906711,1.585)); +#181468 = DIRECTION('',(0.,0.,-1.)); +#181469 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#181470 = ORIENTED_EDGE('',*,*,#181471,.T.); +#181471 = EDGE_CURVE('',#181463,#181472,#181474,.T.); +#181472 = VERTEX_POINT('',#181473); +#181473 = CARTESIAN_POINT('',(142.566054,-92.403681,1.585)); +#181474 = LINE('',#181475,#181476); +#181475 = CARTESIAN_POINT('',(141.939269,-92.402919,1.585)); +#181476 = VECTOR('',#181477,1.); +#181477 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#181478 = ORIENTED_EDGE('',*,*,#181479,.T.); +#181479 = EDGE_CURVE('',#181472,#181480,#181482,.T.); +#181480 = VERTEX_POINT('',#181481); +#181481 = CARTESIAN_POINT('',(142.631875,-92.492551,1.585)); +#181482 = CIRCLE('',#181483,7.447391611626E-02); +#181483 = AXIS2_PLACEMENT_3D('',#181484,#181485,#181486); +#181484 = CARTESIAN_POINT('',(142.55887492664,-92.4778080874,1.585)); +#181485 = DIRECTION('',(0.,0.,-1.)); +#181486 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#181487 = ORIENTED_EDGE('',*,*,#181488,.T.); +#181488 = EDGE_CURVE('',#181480,#181489,#181491,.T.); +#181489 = VERTEX_POINT('',#181490); +#181490 = CARTESIAN_POINT('',(142.614759,-92.527307,1.585)); +#181491 = LINE('',#181492,#181493); +#181492 = CARTESIAN_POINT('',(142.631875,-92.492551,1.585)); +#181493 = VECTOR('',#181494,1.); +#181494 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#181495 = ORIENTED_EDGE('',*,*,#181496,.T.); +#181496 = EDGE_CURVE('',#181489,#181497,#181499,.T.); +#181497 = VERTEX_POINT('',#181498); +#181498 = CARTESIAN_POINT('',(142.387863,-92.786616,1.585)); +#181499 = LINE('',#181500,#181501); +#181500 = CARTESIAN_POINT('',(142.614759,-92.527307,1.585)); +#181501 = VECTOR('',#181502,1.); +#181502 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#181503 = ORIENTED_EDGE('',*,*,#181504,.T.); +#181504 = EDGE_CURVE('',#181497,#181505,#181507,.T.); +#181505 = VERTEX_POINT('',#181506); +#181506 = CARTESIAN_POINT('',(142.631875,-93.034715,1.585)); +#181507 = CIRCLE('',#181508,0.348520834816); +#181508 = AXIS2_PLACEMENT_3D('',#181509,#181510,#181511); +#181509 = CARTESIAN_POINT('',(142.2945696174,-93.12241819931,1.585)); +#181510 = DIRECTION('',(0.,0.,-1.)); +#181511 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#181512 = ORIENTED_EDGE('',*,*,#181513,.T.); +#181513 = EDGE_CURVE('',#181505,#181514,#181516,.T.); +#181514 = VERTEX_POINT('',#181515); +#181515 = CARTESIAN_POINT('',(142.630653,-93.307252,1.585)); +#181516 = LINE('',#181517,#181518); +#181517 = CARTESIAN_POINT('',(142.631875,-93.034715,1.585)); +#181518 = VECTOR('',#181519,1.); +#181519 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#181520 = ORIENTED_EDGE('',*,*,#181521,.T.); +#181521 = EDGE_CURVE('',#181514,#181522,#181524,.T.); +#181522 = VERTEX_POINT('',#181523); +#181523 = CARTESIAN_POINT('',(142.382472,-93.551478,1.585)); +#181524 = CIRCLE('',#181525,0.348635327447); +#181525 = AXIS2_PLACEMENT_3D('',#181526,#181527,#181528); +#181526 = CARTESIAN_POINT('',(142.29470048129,-93.21407208415,1.585)); +#181527 = DIRECTION('',(0.,0.,-1.)); +#181528 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#181529 = ORIENTED_EDGE('',*,*,#181530,.T.); +#181530 = EDGE_CURVE('',#181522,#181531,#181533,.T.); +#181531 = VERTEX_POINT('',#181532); +#181532 = CARTESIAN_POINT('',(142.062316,-93.550256,1.585)); +#181533 = LINE('',#181534,#181535); +#181534 = CARTESIAN_POINT('',(142.382472,-93.551478,1.585)); +#181535 = VECTOR('',#181536,1.); +#181536 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#181537 = ORIENTED_EDGE('',*,*,#181538,.T.); +#181538 = EDGE_CURVE('',#181531,#181539,#181541,.T.); +#181539 = VERTEX_POINT('',#181540); +#181540 = CARTESIAN_POINT('',(141.939603,-93.48805,1.585)); +#181541 = LINE('',#181542,#181543); +#181542 = CARTESIAN_POINT('',(142.062316,-93.550256,1.585)); +#181543 = VECTOR('',#181544,1.); +#181544 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#181545 = ORIENTED_EDGE('',*,*,#181546,.T.); +#181546 = EDGE_CURVE('',#181539,#181547,#181549,.T.); +#181547 = VERTEX_POINT('',#181548); +#181548 = CARTESIAN_POINT('',(141.876908,-93.424347,1.585)); +#181549 = LINE('',#181550,#181551); +#181550 = CARTESIAN_POINT('',(141.939603,-93.48805,1.585)); +#181551 = VECTOR('',#181552,1.); +#181552 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#181553 = ORIENTED_EDGE('',*,*,#181554,.T.); +#181554 = EDGE_CURVE('',#181547,#181555,#181557,.T.); +#181555 = VERTEX_POINT('',#181556); +#181556 = CARTESIAN_POINT('',(141.992303,-93.329648,1.585)); +#181557 = CIRCLE('',#181558,7.50001266804E-02); +#181558 = AXIS2_PLACEMENT_3D('',#181559,#181560,#181561); +#181559 = CARTESIAN_POINT('',(141.93926905199,-93.38268024831,1.585)); +#181560 = DIRECTION('',(0.,0.,-1.)); +#181561 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#181562 = ORIENTED_EDGE('',*,*,#181563,.T.); +#181563 = EDGE_CURVE('',#181555,#181564,#181566,.T.); +#181564 = VERTEX_POINT('',#181565); +#181565 = CARTESIAN_POINT('',(142.031315,-93.368661,1.585)); +#181566 = LINE('',#181567,#181568); +#181567 = CARTESIAN_POINT('',(141.992303,-93.329648,1.585)); +#181568 = VECTOR('',#181569,1.); +#181569 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#181570 = ORIENTED_EDGE('',*,*,#181571,.T.); +#181571 = EDGE_CURVE('',#181564,#181572,#181574,.T.); +#181572 = VERTEX_POINT('',#181573); +#181573 = CARTESIAN_POINT('',(142.41865,-93.368661,1.585)); +#181574 = CIRCLE('',#181575,0.358502380266); +#181575 = AXIS2_PLACEMENT_3D('',#181576,#181577,#181578); +#181576 = CARTESIAN_POINT('',(142.2249825,-93.066971,1.585)); +#181577 = DIRECTION('',(0.,0.,1.)); +#181578 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#181579 = ORIENTED_EDGE('',*,*,#181580,.T.); +#181580 = EDGE_CURVE('',#181572,#181581,#181583,.T.); +#181581 = VERTEX_POINT('',#181582); +#181582 = CARTESIAN_POINT('',(142.449057,-93.338253,1.585)); +#181583 = LINE('',#181584,#181585); +#181584 = CARTESIAN_POINT('',(142.41865,-93.368661,1.585)); +#181585 = VECTOR('',#181586,1.); +#181586 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#181587 = ORIENTED_EDGE('',*,*,#181588,.T.); +#181588 = EDGE_CURVE('',#181581,#181589,#181591,.T.); +#181589 = VERTEX_POINT('',#181590); +#181590 = CARTESIAN_POINT('',(142.449058,-92.998536,1.585)); +#181591 = CIRCLE('',#181592,0.305616146029); +#181592 = AXIS2_PLACEMENT_3D('',#181593,#181594,#181595); +#181593 = CARTESIAN_POINT('',(142.19499192049,-93.16839375212,1.585)); +#181594 = DIRECTION('',(0.,-0.,1.)); +#181595 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#181596 = ORIENTED_EDGE('',*,*,#181597,.T.); +#181597 = EDGE_CURVE('',#181589,#181598,#181600,.T.); +#181598 = VERTEX_POINT('',#181599); +#181599 = CARTESIAN_POINT('',(142.418651,-92.968129,1.585)); +#181600 = LINE('',#181601,#181602); +#181601 = CARTESIAN_POINT('',(142.449058,-92.998536,1.585)); +#181602 = VECTOR('',#181603,1.); +#181603 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#181604 = ORIENTED_EDGE('',*,*,#181605,.T.); +#181605 = EDGE_CURVE('',#181598,#181606,#181608,.T.); +#181606 = VERTEX_POINT('',#181607); +#181607 = CARTESIAN_POINT('',(142.350135,-92.933871,1.585)); +#181608 = LINE('',#181609,#181610); +#181609 = CARTESIAN_POINT('',(142.418651,-92.968129,1.585)); +#181610 = VECTOR('',#181611,1.); +#181611 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#181612 = ORIENTED_EDGE('',*,*,#181613,.T.); +#181613 = EDGE_CURVE('',#181606,#181614,#181616,.T.); +#181614 = VERTEX_POINT('',#181615); +#181615 = CARTESIAN_POINT('',(142.210351,-92.93243,1.585)); +#181616 = LINE('',#181617,#181618); +#181617 = CARTESIAN_POINT('',(142.350135,-92.933871,1.585)); +#181618 = VECTOR('',#181619,1.); +#181619 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#181620 = ORIENTED_EDGE('',*,*,#181621,.T.); +#181621 = EDGE_CURVE('',#181614,#181622,#181624,.T.); +#181622 = VERTEX_POINT('',#181623); +#181623 = CARTESIAN_POINT('',(142.16854,-92.809483,1.585)); +#181624 = CIRCLE('',#181625,7.500015628756E-02); +#181625 = AXIS2_PLACEMENT_3D('',#181626,#181627,#181628); +#181626 = CARTESIAN_POINT('',(142.22498328432,-92.8588710461,1.585)); +#181627 = DIRECTION('',(0.,0.,-1.)); +#181628 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#181629 = ORIENTED_EDGE('',*,*,#181630,.T.); +#181630 = EDGE_CURVE('',#181622,#181631,#181633,.T.); +#181631 = VERTEX_POINT('',#181632); +#181632 = CARTESIAN_POINT('',(142.393034,-92.552919,1.585)); +#181633 = LINE('',#181634,#181635); +#181634 = CARTESIAN_POINT('',(142.16854,-92.809483,1.585)); +#181635 = VECTOR('',#181636,1.); +#181636 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#181637 = ORIENTED_EDGE('',*,*,#181638,.T.); +#181638 = EDGE_CURVE('',#181631,#181461,#181639,.T.); +#181639 = LINE('',#181640,#181641); +#181640 = CARTESIAN_POINT('',(142.393034,-92.552919,1.585)); +#181641 = VECTOR('',#181642,1.); +#181642 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#181643 = PLANE('',#181644); +#181644 = AXIS2_PLACEMENT_3D('',#181645,#181646,#181647); +#181645 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181646 = DIRECTION('',(0.,0.,1.)); +#181647 = DIRECTION('',(1.,0.,-0.)); +#181648 = SHELL_BASED_SURFACE_MODEL('',(#181649)); +#181649 = OPEN_SHELL('',(#181650)); +#181650 = ADVANCED_FACE('',(#181651),#181794,.T.); +#181651 = FACE_BOUND('',#181652,.F.); +#181652 = EDGE_LOOP('',(#181653,#181664,#181672,#181680,#181689,#181697, + #181705,#181714,#181722,#181731,#181739,#181747,#181755,#181764, + #181772,#181780,#181788)); +#181653 = ORIENTED_EDGE('',*,*,#181654,.T.); +#181654 = EDGE_CURVE('',#181655,#181657,#181659,.T.); +#181655 = VERTEX_POINT('',#181656); +#181656 = CARTESIAN_POINT('',(186.075954,-92.191162,1.585)); +#181657 = VERTEX_POINT('',#181658); +#181658 = CARTESIAN_POINT('',(186.244953,-92.261164,1.585)); +#181659 = CIRCLE('',#181660,0.109999394362); +#181660 = AXIS2_PLACEMENT_3D('',#181661,#181662,#181663); +#181661 = CARTESIAN_POINT('',(186.137067,-92.28262274562,1.585)); +#181662 = DIRECTION('',(0.,0.,-1.)); +#181663 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#181664 = ORIENTED_EDGE('',*,*,#181665,.T.); +#181665 = EDGE_CURVE('',#181657,#181666,#181668,.T.); +#181666 = VERTEX_POINT('',#181667); +#181667 = CARTESIAN_POINT('',(186.247067,-92.401196,1.585)); +#181668 = LINE('',#181669,#181670); +#181669 = CARTESIAN_POINT('',(186.244953,-92.261164,1.585)); +#181670 = VECTOR('',#181671,1.); +#181671 = DIRECTION('',(1.509482935838E-02,-0.999886066573,0.)); +#181672 = ORIENTED_EDGE('',*,*,#181673,.T.); +#181673 = EDGE_CURVE('',#181666,#181674,#181676,.T.); +#181674 = VERTEX_POINT('',#181675); +#181675 = CARTESIAN_POINT('',(186.69186,-92.40331,1.585)); +#181676 = LINE('',#181677,#181678); +#181677 = CARTESIAN_POINT('',(186.247067,-92.401196,1.585)); +#181678 = VECTOR('',#181679,1.); +#181679 = DIRECTION('',(0.999988705767,-4.752718959153E-03,0.)); +#181680 = ORIENTED_EDGE('',*,*,#181681,.T.); +#181681 = EDGE_CURVE('',#181674,#181682,#181684,.T.); +#181682 = VERTEX_POINT('',#181683); +#181683 = CARTESIAN_POINT('',(186.69186,-92.619082,1.585)); +#181684 = CIRCLE('',#181685,0.109999639072); +#181685 = AXIS2_PLACEMENT_3D('',#181686,#181687,#181688); +#181686 = CARTESIAN_POINT('',(186.6704,-92.511196,1.585)); +#181687 = DIRECTION('',(0.,0.,-1.)); +#181688 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#181689 = ORIENTED_EDGE('',*,*,#181690,.T.); +#181690 = EDGE_CURVE('',#181682,#181691,#181693,.T.); +#181691 = VERTEX_POINT('',#181692); +#181692 = CARTESIAN_POINT('',(186.247067,-92.621196,1.585)); +#181693 = LINE('',#181694,#181695); +#181694 = CARTESIAN_POINT('',(186.69186,-92.619082,1.585)); +#181695 = VECTOR('',#181696,1.); +#181696 = DIRECTION('',(-0.999988705767,-4.752718959121E-03,0.)); +#181697 = ORIENTED_EDGE('',*,*,#181698,.T.); +#181698 = EDGE_CURVE('',#181691,#181699,#181701,.T.); +#181699 = VERTEX_POINT('',#181700); +#181700 = CARTESIAN_POINT('',(186.244953,-93.294561,1.585)); +#181701 = LINE('',#181702,#181703); +#181702 = CARTESIAN_POINT('',(186.247067,-92.621196,1.585)); +#181703 = VECTOR('',#181704,1.); +#181704 = DIRECTION('',(-3.139440841247E-03,-0.999995071943,0.)); +#181705 = ORIENTED_EDGE('',*,*,#181706,.T.); +#181706 = EDGE_CURVE('',#181699,#181707,#181709,.T.); +#181707 = VERTEX_POINT('',#181708); +#181708 = CARTESIAN_POINT('',(186.112923,-93.379875,1.585)); +#181709 = CIRCLE('',#181710,0.109137188848); +#181710 = AXIS2_PLACEMENT_3D('',#181711,#181712,#181713); +#181711 = CARTESIAN_POINT('',(186.1378434959,-93.27362108302,1.585)); +#181712 = DIRECTION('',(0.,0.,-1.)); +#181713 = DIRECTION('',(0.981420771612,-0.191867842664,0.)); +#181714 = ORIENTED_EDGE('',*,*,#181715,.T.); +#181715 = EDGE_CURVE('',#181707,#181716,#181718,.T.); +#181716 = VERTEX_POINT('',#181717); +#181717 = CARTESIAN_POINT('',(184.939735,-92.987711,1.585)); +#181718 = LINE('',#181719,#181720); +#181719 = CARTESIAN_POINT('',(186.112923,-93.379875,1.585)); +#181720 = VECTOR('',#181721,1.); +#181721 = DIRECTION('',(-0.948415861279,0.317028948321,0.)); +#181722 = ORIENTED_EDGE('',*,*,#181723,.T.); +#181723 = EDGE_CURVE('',#181716,#181724,#181726,.T.); +#181724 = VERTEX_POINT('',#181725); +#181725 = CARTESIAN_POINT('',(185.007968,-92.783012,1.585)); +#181726 = CIRCLE('',#181727,0.109999365974); +#181727 = AXIS2_PLACEMENT_3D('',#181728,#181729,#181730); +#181728 = CARTESIAN_POINT('',(184.99420965101,-92.89214755034,1.585)); +#181729 = DIRECTION('',(0.,0.,-1.)); +#181730 = DIRECTION('',(-0.495226954596,-0.868763640723,-0.)); +#181731 = ORIENTED_EDGE('',*,*,#181732,.T.); +#181732 = EDGE_CURVE('',#181724,#181733,#181735,.T.); +#181733 = VERTEX_POINT('',#181734); +#181734 = CARTESIAN_POINT('',(186.027067,-93.120484,1.585)); +#181735 = LINE('',#181736,#181737); +#181736 = CARTESIAN_POINT('',(185.007968,-92.783012,1.585)); +#181737 = VECTOR('',#181738,1.); +#181738 = DIRECTION('',(0.94930398992,-0.314359562797,0.)); +#181739 = ORIENTED_EDGE('',*,*,#181740,.T.); +#181740 = EDGE_CURVE('',#181733,#181741,#181743,.T.); +#181741 = VERTEX_POINT('',#181742); +#181742 = CARTESIAN_POINT('',(186.027067,-92.621196,1.585)); +#181743 = LINE('',#181744,#181745); +#181744 = CARTESIAN_POINT('',(186.027067,-93.120484,1.585)); +#181745 = VECTOR('',#181746,1.); +#181746 = DIRECTION('',(0.,1.,0.)); +#181747 = ORIENTED_EDGE('',*,*,#181748,.T.); +#181748 = EDGE_CURVE('',#181741,#181749,#181751,.T.); +#181749 = VERTEX_POINT('',#181750); +#181750 = CARTESIAN_POINT('',(185.582273,-92.619082,1.585)); +#181751 = LINE('',#181752,#181753); +#181752 = CARTESIAN_POINT('',(186.027067,-92.621196,1.585)); +#181753 = VECTOR('',#181754,1.); +#181754 = DIRECTION('',(-0.999988705818,4.752708274148E-03,0.)); +#181755 = ORIENTED_EDGE('',*,*,#181756,.T.); +#181756 = EDGE_CURVE('',#181749,#181757,#181759,.T.); +#181757 = VERTEX_POINT('',#181758); +#181758 = CARTESIAN_POINT('',(185.582273,-92.40331,1.585)); +#181759 = CIRCLE('',#181760,0.109999639072); +#181760 = AXIS2_PLACEMENT_3D('',#181761,#181762,#181763); +#181761 = CARTESIAN_POINT('',(185.603733,-92.511196,1.585)); +#181762 = DIRECTION('',(0.,0.,-1.)); +#181763 = DIRECTION('',(-0.195091549218,-0.980785036297,-0.)); +#181764 = ORIENTED_EDGE('',*,*,#181765,.T.); +#181765 = EDGE_CURVE('',#181757,#181766,#181768,.T.); +#181766 = VERTEX_POINT('',#181767); +#181767 = CARTESIAN_POINT('',(186.027067,-92.401196,1.585)); +#181768 = LINE('',#181769,#181770); +#181769 = CARTESIAN_POINT('',(185.582273,-92.40331,1.585)); +#181770 = VECTOR('',#181771,1.); +#181771 = DIRECTION('',(0.999988705818,4.75270827418E-03,0.)); +#181772 = ORIENTED_EDGE('',*,*,#181773,.T.); +#181773 = EDGE_CURVE('',#181766,#181774,#181776,.T.); +#181774 = VERTEX_POINT('',#181775); +#181775 = CARTESIAN_POINT('',(186.029181,-92.261164,1.585)); +#181776 = LINE('',#181777,#181778); +#181777 = CARTESIAN_POINT('',(186.027067,-92.401196,1.585)); +#181778 = VECTOR('',#181779,1.); +#181779 = DIRECTION('',(1.509482935858E-02,0.999886066573,0.)); +#181780 = ORIENTED_EDGE('',*,*,#181781,.T.); +#181781 = EDGE_CURVE('',#181774,#181782,#181784,.T.); +#181782 = VERTEX_POINT('',#181783); +#181783 = CARTESIAN_POINT('',(186.045605,-92.221511,1.585)); +#181784 = LINE('',#181785,#181786); +#181785 = CARTESIAN_POINT('',(186.029181,-92.261164,1.585)); +#181786 = VECTOR('',#181787,1.); +#181787 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#181788 = ORIENTED_EDGE('',*,*,#181789,.T.); +#181789 = EDGE_CURVE('',#181782,#181655,#181790,.T.); +#181790 = LINE('',#181791,#181792); +#181791 = CARTESIAN_POINT('',(186.045605,-92.221511,1.585)); +#181792 = VECTOR('',#181793,1.); +#181793 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#181794 = PLANE('',#181795); +#181795 = AXIS2_PLACEMENT_3D('',#181796,#181797,#181798); +#181796 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181797 = DIRECTION('',(0.,0.,1.)); +#181798 = DIRECTION('',(1.,0.,-0.)); +#181799 = SHELL_BASED_SURFACE_MODEL('',(#181800)); +#181800 = OPEN_SHELL('',(#181801)); +#181801 = ADVANCED_FACE('',(#181802,#181903),#181986,.T.); +#181802 = FACE_BOUND('',#181803,.F.); +#181803 = EDGE_LOOP('',(#181804,#181815,#181823,#181831,#181839,#181848, + #181856,#181864,#181872,#181880,#181888,#181897)); +#181804 = ORIENTED_EDGE('',*,*,#181805,.T.); +#181805 = EDGE_CURVE('',#181806,#181808,#181810,.T.); +#181806 = VERTEX_POINT('',#181807); +#181807 = CARTESIAN_POINT('',(199.870714,-92.359597,1.585)); +#181808 = VERTEX_POINT('',#181809); +#181809 = CARTESIAN_POINT('',(199.935714,-92.294597,1.585)); +#181810 = CIRCLE('',#181811,6.500103935393E-02); +#181811 = AXIS2_PLACEMENT_3D('',#181812,#181813,#181814); +#181812 = CARTESIAN_POINT('',(199.93571503934,-92.35959803934,1.585)); +#181813 = DIRECTION('',(0.,0.,-1.)); +#181814 = DIRECTION('',(-0.999999999872,1.598967714806E-05,0.)); +#181815 = ORIENTED_EDGE('',*,*,#181816,.T.); +#181816 = EDGE_CURVE('',#181808,#181817,#181819,.T.); +#181817 = VERTEX_POINT('',#181818); +#181818 = CARTESIAN_POINT('',(200.160222,-92.29663,1.585)); +#181819 = LINE('',#181820,#181821); +#181820 = CARTESIAN_POINT('',(199.935714,-92.294597,1.585)); +#181821 = VECTOR('',#181822,1.); +#181822 = DIRECTION('',(0.99995900278,-9.05498535753E-03,0.)); +#181823 = ORIENTED_EDGE('',*,*,#181824,.T.); +#181824 = EDGE_CURVE('',#181817,#181825,#181827,.T.); +#181825 = VERTEX_POINT('',#181826); +#181826 = CARTESIAN_POINT('',(200.31211,-92.348191,1.585)); +#181827 = LINE('',#181828,#181829); +#181828 = CARTESIAN_POINT('',(200.160222,-92.29663,1.585)); +#181829 = VECTOR('',#181830,1.); +#181830 = DIRECTION('',(0.946926388211,-0.32145048656,0.)); +#181831 = ORIENTED_EDGE('',*,*,#181832,.T.); +#181832 = EDGE_CURVE('',#181825,#181833,#181835,.T.); +#181833 = VERTEX_POINT('',#181834); +#181834 = CARTESIAN_POINT('',(200.416037,-92.45087,1.585)); +#181835 = LINE('',#181836,#181837); +#181836 = CARTESIAN_POINT('',(200.31211,-92.348191,1.585)); +#181837 = VECTOR('',#181838,1.); +#181838 = DIRECTION('',(0.711365069748,-0.70282269282,0.)); +#181839 = ORIENTED_EDGE('',*,*,#181840,.T.); +#181840 = EDGE_CURVE('',#181833,#181841,#181843,.T.); +#181841 = VERTEX_POINT('',#181842); +#181842 = CARTESIAN_POINT('',(200.513059,-92.889647,1.585)); +#181843 = CIRCLE('',#181844,0.67543082859); +#181844 = AXIS2_PLACEMENT_3D('',#181845,#181846,#181847); +#181845 = CARTESIAN_POINT('',(199.84260778858,-92.80778139475,1.585)); +#181846 = DIRECTION('',(0.,0.,-1.)); +#181847 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#181848 = ORIENTED_EDGE('',*,*,#181849,.T.); +#181849 = EDGE_CURVE('',#181841,#181850,#181852,.T.); +#181850 = VERTEX_POINT('',#181851); +#181851 = CARTESIAN_POINT('',(200.465281,-93.07438,1.585)); +#181852 = LINE('',#181853,#181854); +#181853 = CARTESIAN_POINT('',(200.513059,-92.889647,1.585)); +#181854 = VECTOR('',#181855,1.); +#181855 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#181856 = ORIENTED_EDGE('',*,*,#181857,.T.); +#181857 = EDGE_CURVE('',#181850,#181858,#181860,.T.); +#181858 = VERTEX_POINT('',#181859); +#181859 = CARTESIAN_POINT('',(200.410248,-93.176987,1.585)); +#181860 = LINE('',#181861,#181862); +#181861 = CARTESIAN_POINT('',(200.465281,-93.07438,1.585)); +#181862 = VECTOR('',#181863,1.); +#181863 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#181864 = ORIENTED_EDGE('',*,*,#181865,.T.); +#181865 = EDGE_CURVE('',#181858,#181866,#181868,.T.); +#181866 = VERTEX_POINT('',#181867); +#181867 = CARTESIAN_POINT('',(200.312114,-93.270999,1.585)); +#181868 = LINE('',#181869,#181870); +#181869 = CARTESIAN_POINT('',(200.410248,-93.176987,1.585)); +#181870 = VECTOR('',#181871,1.); +#181871 = DIRECTION('',(-0.722109804107,-0.691778455008,0.)); +#181872 = ORIENTED_EDGE('',*,*,#181873,.T.); +#181873 = EDGE_CURVE('',#181866,#181874,#181876,.T.); +#181874 = VERTEX_POINT('',#181875); +#181875 = CARTESIAN_POINT('',(200.160222,-93.322563,1.585)); +#181876 = LINE('',#181877,#181878); +#181877 = CARTESIAN_POINT('',(200.312114,-93.270999,1.585)); +#181878 = VECTOR('',#181879,1.); +#181879 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#181880 = ORIENTED_EDGE('',*,*,#181881,.T.); +#181881 = EDGE_CURVE('',#181874,#181882,#181884,.T.); +#181882 = VERTEX_POINT('',#181883); +#181883 = CARTESIAN_POINT('',(199.935714,-93.324597,1.585)); +#181884 = LINE('',#181885,#181886); +#181885 = CARTESIAN_POINT('',(200.160222,-93.322563,1.585)); +#181886 = VECTOR('',#181887,1.); +#181887 = DIRECTION('',(-0.999958962441,-9.059438993705E-03,0.)); +#181888 = ORIENTED_EDGE('',*,*,#181889,.T.); +#181889 = EDGE_CURVE('',#181882,#181890,#181892,.T.); +#181890 = VERTEX_POINT('',#181891); +#181891 = CARTESIAN_POINT('',(199.870714,-93.259597,1.585)); +#181892 = CIRCLE('',#181893,6.500103935388E-02); +#181893 = AXIS2_PLACEMENT_3D('',#181894,#181895,#181896); +#181894 = CARTESIAN_POINT('',(199.93571503934,-93.25959596065,1.585)); +#181895 = DIRECTION('',(0.,0.,-1.)); +#181896 = DIRECTION('',(-1.59896764922E-05,-0.999999999872,-0.)); +#181897 = ORIENTED_EDGE('',*,*,#181898,.T.); +#181898 = EDGE_CURVE('',#181890,#181806,#181899,.T.); +#181899 = LINE('',#181900,#181901); +#181900 = CARTESIAN_POINT('',(199.870714,-93.259597,1.585)); +#181901 = VECTOR('',#181902,1.); +#181902 = DIRECTION('',(0.,1.,0.)); +#181903 = FACE_BOUND('',#181904,.F.); +#181904 = EDGE_LOOP('',(#181905,#181915,#181923,#181931,#181939,#181947, + #181955,#181964,#181972,#181980)); +#181905 = ORIENTED_EDGE('',*,*,#181906,.T.); +#181906 = EDGE_CURVE('',#181907,#181909,#181911,.T.); +#181907 = VERTEX_POINT('',#181908); +#181908 = CARTESIAN_POINT('',(200.243458,-92.459265,1.585)); +#181909 = VERTEX_POINT('',#181910); +#181910 = CARTESIAN_POINT('',(200.139453,-92.424597,1.585)); +#181911 = LINE('',#181912,#181913); +#181912 = CARTESIAN_POINT('',(200.243458,-92.459265,1.585)); +#181913 = VECTOR('',#181914,1.); +#181914 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#181915 = ORIENTED_EDGE('',*,*,#181916,.T.); +#181916 = EDGE_CURVE('',#181909,#181917,#181919,.T.); +#181917 = VERTEX_POINT('',#181918); +#181918 = CARTESIAN_POINT('',(200.000714,-92.424597,1.585)); +#181919 = LINE('',#181920,#181921); +#181920 = CARTESIAN_POINT('',(200.139453,-92.424597,1.585)); +#181921 = VECTOR('',#181922,1.); +#181922 = DIRECTION('',(-1.,0.,0.)); +#181923 = ORIENTED_EDGE('',*,*,#181924,.T.); +#181924 = EDGE_CURVE('',#181917,#181925,#181927,.T.); +#181925 = VERTEX_POINT('',#181926); +#181926 = CARTESIAN_POINT('',(200.000714,-93.194597,1.585)); +#181927 = LINE('',#181928,#181929); +#181928 = CARTESIAN_POINT('',(200.000714,-92.424597,1.585)); +#181929 = VECTOR('',#181930,1.); +#181930 = DIRECTION('',(0.,-1.,0.)); +#181931 = ORIENTED_EDGE('',*,*,#181932,.T.); +#181932 = EDGE_CURVE('',#181925,#181933,#181935,.T.); +#181933 = VERTEX_POINT('',#181934); +#181934 = CARTESIAN_POINT('',(200.139453,-93.194597,1.585)); +#181935 = LINE('',#181936,#181937); +#181936 = CARTESIAN_POINT('',(200.000714,-93.194597,1.585)); +#181937 = VECTOR('',#181938,1.); +#181938 = DIRECTION('',(1.,0.,0.)); +#181939 = ORIENTED_EDGE('',*,*,#181940,.T.); +#181940 = EDGE_CURVE('',#181933,#181941,#181943,.T.); +#181941 = VERTEX_POINT('',#181942); +#181942 = CARTESIAN_POINT('',(200.243458,-93.159928,1.585)); +#181943 = LINE('',#181944,#181945); +#181944 = CARTESIAN_POINT('',(200.139453,-93.194597,1.585)); +#181945 = VECTOR('',#181946,1.); +#181946 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#181947 = ORIENTED_EDGE('',*,*,#181948,.T.); +#181948 = EDGE_CURVE('',#181941,#181949,#181951,.T.); +#181949 = VERTEX_POINT('',#181950); +#181950 = CARTESIAN_POINT('',(200.310865,-93.092522,1.585)); +#181951 = LINE('',#181952,#181953); +#181952 = CARTESIAN_POINT('',(200.243458,-93.159928,1.585)); +#181953 = VECTOR('',#181954,1.); +#181954 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#181955 = ORIENTED_EDGE('',*,*,#181956,.T.); +#181956 = EDGE_CURVE('',#181949,#181957,#181959,.T.); +#181957 = VERTEX_POINT('',#181958); +#181958 = CARTESIAN_POINT('',(200.385,-92.753311,1.585)); +#181959 = CIRCLE('',#181960,0.553325470753); +#181960 = AXIS2_PLACEMENT_3D('',#181961,#181962,#181963); +#181961 = CARTESIAN_POINT('',(199.83466292366,-92.81074077444,1.585)); +#181962 = DIRECTION('',(0.,0.,1.)); +#181963 = DIRECTION('',(0.860618390997,-0.509250414901,0.)); +#181964 = ORIENTED_EDGE('',*,*,#181965,.T.); +#181965 = EDGE_CURVE('',#181957,#181966,#181968,.T.); +#181966 = VERTEX_POINT('',#181967); +#181967 = CARTESIAN_POINT('',(200.345814,-92.59657,1.585)); +#181968 = LINE('',#181969,#181970); +#181969 = CARTESIAN_POINT('',(200.385,-92.753311,1.585)); +#181970 = VECTOR('',#181971,1.); +#181971 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#181972 = ORIENTED_EDGE('',*,*,#181973,.T.); +#181973 = EDGE_CURVE('',#181966,#181974,#181976,.T.); +#181974 = VERTEX_POINT('',#181975); +#181975 = CARTESIAN_POINT('',(200.310864,-92.526669,1.585)); +#181976 = LINE('',#181977,#181978); +#181977 = CARTESIAN_POINT('',(200.345814,-92.59657,1.585)); +#181978 = VECTOR('',#181979,1.); +#181979 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#181980 = ORIENTED_EDGE('',*,*,#181981,.T.); +#181981 = EDGE_CURVE('',#181974,#181907,#181982,.T.); +#181982 = LINE('',#181983,#181984); +#181983 = CARTESIAN_POINT('',(200.310864,-92.526669,1.585)); +#181984 = VECTOR('',#181985,1.); +#181985 = DIRECTION('',(-0.707117271529,0.707096290688,0.)); +#181986 = PLANE('',#181987); +#181987 = AXIS2_PLACEMENT_3D('',#181988,#181989,#181990); +#181988 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181989 = DIRECTION('',(0.,0.,1.)); +#181990 = DIRECTION('',(1.,0.,-0.)); +#181991 = SHELL_BASED_SURFACE_MODEL('',(#181992)); +#181992 = OPEN_SHELL('',(#181993)); +#181993 = ADVANCED_FACE('',(#181994),#182112,.T.); +#181994 = FACE_BOUND('',#181995,.F.); +#181995 = EDGE_LOOP('',(#181996,#182007,#182015,#182023,#182031,#182039, + #182047,#182055,#182064,#182072,#182081,#182089,#182097,#182106)); +#181996 = ORIENTED_EDGE('',*,*,#181997,.T.); +#181997 = EDGE_CURVE('',#181998,#182000,#182002,.T.); +#181998 = VERTEX_POINT('',#181999); +#181999 = CARTESIAN_POINT('',(198.927857,-92.359597,1.585)); +#182000 = VERTEX_POINT('',#182001); +#182001 = CARTESIAN_POINT('',(198.98466,-92.295116,1.585)); +#182002 = CIRCLE('',#182003,6.499996854975E-02); +#182003 = AXIS2_PLACEMENT_3D('',#182004,#182005,#182006); +#182004 = CARTESIAN_POINT('',(198.99285696855,-92.35959704851,1.585)); +#182005 = DIRECTION('',(0.,0.,-1.)); +#182006 = DIRECTION('',(-1.,7.464412463361E-07,0.)); +#182007 = ORIENTED_EDGE('',*,*,#182008,.T.); +#182008 = EDGE_CURVE('',#182000,#182009,#182011,.T.); +#182009 = VERTEX_POINT('',#182010); +#182010 = CARTESIAN_POINT('',(199.000899,-92.299545,1.585)); +#182011 = LINE('',#182012,#182013); +#182012 = CARTESIAN_POINT('',(198.98466,-92.295116,1.585)); +#182013 = VECTOR('',#182014,1.); +#182014 = DIRECTION('',(0.964761079179,-0.263127459799,0.)); +#182015 = ORIENTED_EDGE('',*,*,#182016,.T.); +#182016 = EDGE_CURVE('',#182009,#182017,#182019,.T.); +#182017 = VERTEX_POINT('',#182018); +#182018 = CARTESIAN_POINT('',(199.017731,-92.299545,1.585)); +#182019 = LINE('',#182020,#182021); +#182020 = CARTESIAN_POINT('',(199.000899,-92.299545,1.585)); +#182021 = VECTOR('',#182022,1.); +#182022 = DIRECTION('',(1.,0.,0.)); +#182023 = ORIENTED_EDGE('',*,*,#182024,.T.); +#182024 = EDGE_CURVE('',#182017,#182025,#182027,.T.); +#182025 = VERTEX_POINT('',#182026); +#182026 = CARTESIAN_POINT('',(199.032656,-92.308206,1.585)); +#182027 = LINE('',#182028,#182029); +#182028 = CARTESIAN_POINT('',(199.017731,-92.299545,1.585)); +#182029 = VECTOR('',#182030,1.); +#182030 = DIRECTION('',(0.864917988571,-0.501913212664,0.)); +#182031 = ORIENTED_EDGE('',*,*,#182032,.T.); +#182032 = EDGE_CURVE('',#182025,#182033,#182035,.T.); +#182033 = VERTEX_POINT('',#182034); +#182034 = CARTESIAN_POINT('',(199.049293,-92.327348,1.585)); +#182035 = LINE('',#182036,#182037); +#182036 = CARTESIAN_POINT('',(199.032656,-92.308206,1.585)); +#182037 = VECTOR('',#182038,1.); +#182038 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#182039 = ORIENTED_EDGE('',*,*,#182040,.T.); +#182040 = EDGE_CURVE('',#182033,#182041,#182043,.T.); +#182041 = VERTEX_POINT('',#182042); +#182042 = CARTESIAN_POINT('',(199.442143,-93.014835,1.585)); +#182043 = LINE('',#182044,#182045); +#182044 = CARTESIAN_POINT('',(199.049293,-92.327348,1.585)); +#182045 = VECTOR('',#182046,1.); +#182046 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#182047 = ORIENTED_EDGE('',*,*,#182048,.T.); +#182048 = EDGE_CURVE('',#182041,#182049,#182051,.T.); +#182049 = VERTEX_POINT('',#182050); +#182050 = CARTESIAN_POINT('',(199.442143,-92.359597,1.585)); +#182051 = LINE('',#182052,#182053); +#182052 = CARTESIAN_POINT('',(199.442143,-93.014835,1.585)); +#182053 = VECTOR('',#182054,1.); +#182054 = DIRECTION('',(0.,1.,0.)); +#182055 = ORIENTED_EDGE('',*,*,#182056,.T.); +#182056 = EDGE_CURVE('',#182049,#182057,#182059,.T.); +#182057 = VERTEX_POINT('',#182058); +#182058 = CARTESIAN_POINT('',(199.572143,-92.359597,1.585)); +#182059 = CIRCLE('',#182060,6.500000000093E-02); +#182060 = AXIS2_PLACEMENT_3D('',#182061,#182062,#182063); +#182061 = CARTESIAN_POINT('',(199.507143,-92.35959734486,1.585)); +#182062 = DIRECTION('',(0.,0.,-1.)); +#182063 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#182064 = ORIENTED_EDGE('',*,*,#182065,.T.); +#182065 = EDGE_CURVE('',#182057,#182066,#182068,.T.); +#182066 = VERTEX_POINT('',#182067); +#182067 = CARTESIAN_POINT('',(199.572143,-93.259597,1.585)); +#182068 = LINE('',#182069,#182070); +#182069 = CARTESIAN_POINT('',(199.572143,-92.359597,1.585)); +#182070 = VECTOR('',#182071,1.); +#182071 = DIRECTION('',(0.,-1.,0.)); +#182072 = ORIENTED_EDGE('',*,*,#182073,.T.); +#182073 = EDGE_CURVE('',#182066,#182074,#182076,.T.); +#182074 = VERTEX_POINT('',#182075); +#182075 = CARTESIAN_POINT('',(199.450707,-93.291846,1.585)); +#182076 = CIRCLE('',#182077,6.500021194143E-02); +#182077 = AXIS2_PLACEMENT_3D('',#182078,#182079,#182080); +#182078 = CARTESIAN_POINT('',(199.50714278806,-93.25959651351,1.585)); +#182079 = DIRECTION('',(-0.,0.,-1.)); +#182080 = DIRECTION('',(0.999999999972,-7.484332334086E-06,-0.)); +#182081 = ORIENTED_EDGE('',*,*,#182082,.T.); +#182082 = EDGE_CURVE('',#182074,#182083,#182085,.T.); +#182083 = VERTEX_POINT('',#182084); +#182084 = CARTESIAN_POINT('',(199.057857,-92.604358,1.585)); +#182085 = LINE('',#182086,#182087); +#182086 = CARTESIAN_POINT('',(199.450707,-93.291846,1.585)); +#182087 = VECTOR('',#182088,1.); +#182088 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#182089 = ORIENTED_EDGE('',*,*,#182090,.T.); +#182090 = EDGE_CURVE('',#182083,#182091,#182093,.T.); +#182091 = VERTEX_POINT('',#182092); +#182092 = CARTESIAN_POINT('',(199.057857,-93.259597,1.585)); +#182093 = LINE('',#182094,#182095); +#182094 = CARTESIAN_POINT('',(199.057857,-92.604358,1.585)); +#182095 = VECTOR('',#182096,1.); +#182096 = DIRECTION('',(0.,-1.,0.)); +#182097 = ORIENTED_EDGE('',*,*,#182098,.T.); +#182098 = EDGE_CURVE('',#182091,#182099,#182101,.T.); +#182099 = VERTEX_POINT('',#182100); +#182100 = CARTESIAN_POINT('',(198.927857,-93.259597,1.585)); +#182101 = CIRCLE('',#182102,6.500000000093E-02); +#182102 = AXIS2_PLACEMENT_3D('',#182103,#182104,#182105); +#182103 = CARTESIAN_POINT('',(198.992857,-93.25959665513,1.585)); +#182104 = DIRECTION('',(-0.,0.,-1.)); +#182105 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#182106 = ORIENTED_EDGE('',*,*,#182107,.T.); +#182107 = EDGE_CURVE('',#182099,#181998,#182108,.T.); +#182108 = LINE('',#182109,#182110); +#182109 = CARTESIAN_POINT('',(198.927857,-93.259597,1.585)); +#182110 = VECTOR('',#182111,1.); +#182111 = DIRECTION('',(0.,1.,0.)); +#182112 = PLANE('',#182113); +#182113 = AXIS2_PLACEMENT_3D('',#182114,#182115,#182116); +#182114 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182115 = DIRECTION('',(0.,0.,1.)); +#182116 = DIRECTION('',(1.,0.,-0.)); +#182117 = SHELL_BASED_SURFACE_MODEL('',(#182118)); +#182118 = OPEN_SHELL('',(#182119)); +#182119 = ADVANCED_FACE('',(#182120),#182370,.T.); +#182120 = FACE_BOUND('',#182121,.F.); +#182121 = EDGE_LOOP('',(#182122,#182132,#182140,#182149,#182157,#182166, + #182174,#182182,#182190,#182198,#182207,#182215,#182223,#182231, + #182240,#182248,#182256,#182264,#182273,#182281,#182290,#182298, + #182306,#182314,#182322,#182331,#182339,#182348,#182356,#182364)); +#182122 = ORIENTED_EDGE('',*,*,#182123,.T.); +#182123 = EDGE_CURVE('',#182124,#182126,#182128,.T.); +#182124 = VERTEX_POINT('',#182125); +#182125 = CARTESIAN_POINT('',(198.187892,-92.34819,1.585)); +#182126 = VERTEX_POINT('',#182127); +#182127 = CARTESIAN_POINT('',(198.339777,-92.29663,1.585)); +#182128 = LINE('',#182129,#182130); +#182129 = CARTESIAN_POINT('',(198.187892,-92.34819,1.585)); +#182130 = VECTOR('',#182131,1.); +#182131 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#182132 = ORIENTED_EDGE('',*,*,#182133,.T.); +#182133 = EDGE_CURVE('',#182126,#182134,#182136,.T.); +#182134 = VERTEX_POINT('',#182135); +#182135 = CARTESIAN_POINT('',(198.481765,-92.295232,1.585)); +#182136 = LINE('',#182137,#182138); +#182137 = CARTESIAN_POINT('',(198.339777,-92.29663,1.585)); +#182138 = VECTOR('',#182139,1.); +#182139 = DIRECTION('',(0.999951532626,9.845425265558E-03,0.)); +#182140 = ORIENTED_EDGE('',*,*,#182141,.T.); +#182141 = EDGE_CURVE('',#182134,#182142,#182144,.T.); +#182142 = VERTEX_POINT('',#182143); +#182143 = CARTESIAN_POINT('',(198.61339,-92.359866,1.585)); +#182144 = CIRCLE('',#182145,0.276414597198); +#182145 = AXIS2_PLACEMENT_3D('',#182146,#182147,#182148); +#182146 = CARTESIAN_POINT('',(198.43010572555,-92.56677637741,1.585)); +#182147 = DIRECTION('',(0.,0.,-1.)); +#182148 = DIRECTION('',(0.186890544038,0.982380743169,0.)); +#182149 = ORIENTED_EDGE('',*,*,#182150,.T.); +#182150 = EDGE_CURVE('',#182142,#182151,#182153,.T.); +#182151 = VERTEX_POINT('',#182152); +#182152 = CARTESIAN_POINT('',(198.629122,-92.407062,1.585)); +#182153 = LINE('',#182154,#182155); +#182154 = CARTESIAN_POINT('',(198.61339,-92.359866,1.585)); +#182155 = VECTOR('',#182156,1.); +#182156 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#182157 = ORIENTED_EDGE('',*,*,#182158,.T.); +#182158 = EDGE_CURVE('',#182151,#182159,#182161,.T.); +#182159 = VERTEX_POINT('',#182160); +#182160 = CARTESIAN_POINT('',(198.535217,-92.460592,1.585)); +#182161 = CIRCLE('',#182162,6.500026004257E-02); +#182162 = AXIS2_PLACEMENT_3D('',#182163,#182164,#182165); +#182163 = CARTESIAN_POINT('',(198.56428530559,-92.40245365279,1.585)); +#182164 = DIRECTION('',(0.,0.,-1.)); +#182165 = DIRECTION('',(0.997483615677,-7.089736565004E-02,0.)); +#182166 = ORIENTED_EDGE('',*,*,#182167,.T.); +#182167 = EDGE_CURVE('',#182159,#182168,#182170,.T.); +#182168 = VERTEX_POINT('',#182169); +#182169 = CARTESIAN_POINT('',(198.463227,-92.424597,1.585)); +#182170 = LINE('',#182171,#182172); +#182171 = CARTESIAN_POINT('',(198.535217,-92.460592,1.585)); +#182172 = VECTOR('',#182173,1.); +#182173 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#182174 = ORIENTED_EDGE('',*,*,#182175,.T.); +#182175 = EDGE_CURVE('',#182168,#182176,#182178,.T.); +#182176 = VERTEX_POINT('',#182177); +#182177 = CARTESIAN_POINT('',(198.360547,-92.424597,1.585)); +#182178 = LINE('',#182179,#182180); +#182179 = CARTESIAN_POINT('',(198.463227,-92.424597,1.585)); +#182180 = VECTOR('',#182181,1.); +#182181 = DIRECTION('',(-1.,0.,0.)); +#182182 = ORIENTED_EDGE('',*,*,#182183,.T.); +#182183 = EDGE_CURVE('',#182176,#182184,#182186,.T.); +#182184 = VERTEX_POINT('',#182185); +#182185 = CARTESIAN_POINT('',(198.256541,-92.459265,1.585)); +#182186 = LINE('',#182187,#182188); +#182187 = CARTESIAN_POINT('',(198.360547,-92.424597,1.585)); +#182188 = VECTOR('',#182189,1.); +#182189 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#182190 = ORIENTED_EDGE('',*,*,#182191,.T.); +#182191 = EDGE_CURVE('',#182184,#182192,#182194,.T.); +#182192 = VERTEX_POINT('',#182193); +#182193 = CARTESIAN_POINT('',(198.189134,-92.526671,1.585)); +#182194 = LINE('',#182195,#182196); +#182195 = CARTESIAN_POINT('',(198.256541,-92.459265,1.585)); +#182196 = VECTOR('',#182197,1.); +#182197 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#182198 = ORIENTED_EDGE('',*,*,#182199,.T.); +#182199 = EDGE_CURVE('',#182192,#182200,#182202,.T.); +#182200 = VERTEX_POINT('',#182201); +#182201 = CARTESIAN_POINT('',(198.115,-92.865881,1.585)); +#182202 = CIRCLE('',#182203,0.553307903116); +#182203 = AXIS2_PLACEMENT_3D('',#182204,#182205,#182206); +#182204 = CARTESIAN_POINT('',(198.66531893982,-92.80844668868,1.585)); +#182205 = DIRECTION('',(0.,0.,1.)); +#182206 = DIRECTION('',(-0.860614744786,0.509256576841,0.)); +#182207 = ORIENTED_EDGE('',*,*,#182208,.T.); +#182208 = EDGE_CURVE('',#182200,#182209,#182211,.T.); +#182209 = VERTEX_POINT('',#182210); +#182210 = CARTESIAN_POINT('',(198.154185,-93.022622,1.585)); +#182211 = LINE('',#182212,#182213); +#182212 = CARTESIAN_POINT('',(198.115,-92.865881,1.585)); +#182213 = VECTOR('',#182214,1.); +#182214 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#182215 = ORIENTED_EDGE('',*,*,#182216,.T.); +#182216 = EDGE_CURVE('',#182209,#182217,#182219,.T.); +#182217 = VERTEX_POINT('',#182218); +#182218 = CARTESIAN_POINT('',(198.189135,-93.092522,1.585)); +#182219 = LINE('',#182220,#182221); +#182220 = CARTESIAN_POINT('',(198.154185,-93.022622,1.585)); +#182221 = VECTOR('',#182222,1.); +#182222 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#182223 = ORIENTED_EDGE('',*,*,#182224,.T.); +#182224 = EDGE_CURVE('',#182217,#182225,#182227,.T.); +#182225 = VERTEX_POINT('',#182226); +#182226 = CARTESIAN_POINT('',(198.256541,-93.159928,1.585)); +#182227 = LINE('',#182228,#182229); +#182228 = CARTESIAN_POINT('',(198.189135,-93.092522,1.585)); +#182229 = VECTOR('',#182230,1.); +#182230 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#182231 = ORIENTED_EDGE('',*,*,#182232,.T.); +#182232 = EDGE_CURVE('',#182225,#182233,#182235,.T.); +#182233 = VERTEX_POINT('',#182234); +#182234 = CARTESIAN_POINT('',(198.529175,-93.159927,1.585)); +#182235 = CIRCLE('',#182236,0.272195913582); +#182236 = AXIS2_PLACEMENT_3D('',#182237,#182238,#182239); +#182237 = CARTESIAN_POINT('',(198.39285713583,-92.92432552445,1.585)); +#182238 = DIRECTION('',(0.,0.,1.)); +#182239 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#182240 = ORIENTED_EDGE('',*,*,#182241,.T.); +#182241 = EDGE_CURVE('',#182233,#182242,#182244,.T.); +#182242 = VERTEX_POINT('',#182243); +#182243 = CARTESIAN_POINT('',(198.542143,-93.146958,1.585)); +#182244 = LINE('',#182245,#182246); +#182245 = CARTESIAN_POINT('',(198.529175,-93.159927,1.585)); +#182246 = VECTOR('',#182247,1.); +#182247 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#182248 = ORIENTED_EDGE('',*,*,#182249,.T.); +#182249 = EDGE_CURVE('',#182242,#182250,#182252,.T.); +#182250 = VERTEX_POINT('',#182251); +#182251 = CARTESIAN_POINT('',(198.542143,-92.938882,1.585)); +#182252 = LINE('',#182253,#182254); +#182253 = CARTESIAN_POINT('',(198.542143,-93.146958,1.585)); +#182254 = VECTOR('',#182255,1.); +#182255 = DIRECTION('',(0.,1.,0.)); +#182256 = ORIENTED_EDGE('',*,*,#182257,.T.); +#182257 = EDGE_CURVE('',#182250,#182258,#182260,.T.); +#182258 = VERTEX_POINT('',#182259); +#182259 = CARTESIAN_POINT('',(198.435714,-92.938882,1.585)); +#182260 = LINE('',#182261,#182262); +#182261 = CARTESIAN_POINT('',(198.542143,-92.938882,1.585)); +#182262 = VECTOR('',#182263,1.); +#182263 = DIRECTION('',(-1.,0.,0.)); +#182264 = ORIENTED_EDGE('',*,*,#182265,.T.); +#182265 = EDGE_CURVE('',#182258,#182266,#182268,.T.); +#182266 = VERTEX_POINT('',#182267); +#182267 = CARTESIAN_POINT('',(198.435714,-92.808882,1.585)); +#182268 = CIRCLE('',#182269,6.500000000092E-02); +#182269 = AXIS2_PLACEMENT_3D('',#182270,#182271,#182272); +#182270 = CARTESIAN_POINT('',(198.43571434486,-92.873882,1.585)); +#182271 = DIRECTION('',(0.,0.,-1.)); +#182272 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#182273 = ORIENTED_EDGE('',*,*,#182274,.T.); +#182274 = EDGE_CURVE('',#182266,#182275,#182277,.T.); +#182275 = VERTEX_POINT('',#182276); +#182276 = CARTESIAN_POINT('',(198.607143,-92.808882,1.585)); +#182277 = LINE('',#182278,#182279); +#182278 = CARTESIAN_POINT('',(198.435714,-92.808882,1.585)); +#182279 = VECTOR('',#182280,1.); +#182280 = DIRECTION('',(1.,0.,0.)); +#182281 = ORIENTED_EDGE('',*,*,#182282,.T.); +#182282 = EDGE_CURVE('',#182275,#182283,#182285,.T.); +#182283 = VERTEX_POINT('',#182284); +#182284 = CARTESIAN_POINT('',(198.672143,-92.873882,1.585)); +#182285 = CIRCLE('',#182286,6.500103935392E-02); +#182286 = AXIS2_PLACEMENT_3D('',#182287,#182288,#182289); +#182287 = CARTESIAN_POINT('',(198.60714196065,-92.87388303934,1.585)); +#182288 = DIRECTION('',(0.,0.,-1.)); +#182289 = DIRECTION('',(1.598967692944E-05,0.999999999872,0.)); +#182290 = ORIENTED_EDGE('',*,*,#182291,.T.); +#182291 = EDGE_CURVE('',#182283,#182292,#182294,.T.); +#182292 = VERTEX_POINT('',#182293); +#182293 = CARTESIAN_POINT('',(198.672143,-93.173882,1.585)); +#182294 = LINE('',#182295,#182296); +#182295 = CARTESIAN_POINT('',(198.672143,-92.873882,1.585)); +#182296 = VECTOR('',#182297,1.); +#182297 = DIRECTION('',(0.,-1.,0.)); +#182298 = ORIENTED_EDGE('',*,*,#182299,.T.); +#182299 = EDGE_CURVE('',#182292,#182300,#182302,.T.); +#182300 = VERTEX_POINT('',#182301); +#182301 = CARTESIAN_POINT('',(198.667195,-93.198756,1.585)); +#182302 = LINE('',#182303,#182304); +#182303 = CARTESIAN_POINT('',(198.672143,-93.173882,1.585)); +#182304 = VECTOR('',#182305,1.); +#182305 = DIRECTION('',(-0.195099947481,-0.98078336573,0.)); +#182306 = ORIENTED_EDGE('',*,*,#182307,.T.); +#182307 = EDGE_CURVE('',#182300,#182308,#182310,.T.); +#182308 = VERTEX_POINT('',#182309); +#182309 = CARTESIAN_POINT('',(198.653106,-93.219843,1.585)); +#182310 = LINE('',#182311,#182312); +#182311 = CARTESIAN_POINT('',(198.667195,-93.198756,1.585)); +#182312 = VECTOR('',#182313,1.); +#182313 = DIRECTION('',(-0.55554616352,-0.831485694524,0.)); +#182314 = ORIENTED_EDGE('',*,*,#182315,.T.); +#182315 = EDGE_CURVE('',#182308,#182316,#182318,.T.); +#182316 = VERTEX_POINT('',#182317); +#182317 = CARTESIAN_POINT('',(198.597819,-93.271005,1.585)); +#182318 = LINE('',#182319,#182320); +#182319 = CARTESIAN_POINT('',(198.653106,-93.219843,1.585)); +#182320 = VECTOR('',#182321,1.); +#182321 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#182322 = ORIENTED_EDGE('',*,*,#182323,.T.); +#182323 = EDGE_CURVE('',#182316,#182324,#182326,.T.); +#182324 = VERTEX_POINT('',#182325); +#182325 = CARTESIAN_POINT('',(198.187885,-93.270999,1.585)); +#182326 = CIRCLE('',#182327,0.409311833232); +#182327 = AXIS2_PLACEMENT_3D('',#182328,#182329,#182330); +#182328 = CARTESIAN_POINT('',(198.39285718563,-92.91670734057,1.585)); +#182329 = DIRECTION('',(-0.,0.,-1.)); +#182330 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#182331 = ORIENTED_EDGE('',*,*,#182332,.T.); +#182332 = EDGE_CURVE('',#182324,#182333,#182335,.T.); +#182333 = VERTEX_POINT('',#182334); +#182334 = CARTESIAN_POINT('',(198.083962,-93.168322,1.585)); +#182335 = LINE('',#182336,#182337); +#182336 = CARTESIAN_POINT('',(198.187885,-93.270999,1.585)); +#182337 = VECTOR('',#182338,1.); +#182338 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#182339 = ORIENTED_EDGE('',*,*,#182340,.T.); +#182340 = EDGE_CURVE('',#182333,#182341,#182343,.T.); +#182341 = VERTEX_POINT('',#182342); +#182342 = CARTESIAN_POINT('',(197.986941,-92.729546,1.585)); +#182343 = CIRCLE('',#182344,0.675436077441); +#182344 = AXIS2_PLACEMENT_3D('',#182345,#182346,#182347); +#182345 = CARTESIAN_POINT('',(198.65739758405,-92.81141091072,1.585)); +#182346 = DIRECTION('',(0.,0.,-1.)); +#182347 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#182348 = ORIENTED_EDGE('',*,*,#182349,.T.); +#182349 = EDGE_CURVE('',#182341,#182350,#182352,.T.); +#182350 = VERTEX_POINT('',#182351); +#182351 = CARTESIAN_POINT('',(198.034719,-92.544813,1.585)); +#182352 = LINE('',#182353,#182354); +#182353 = CARTESIAN_POINT('',(197.986941,-92.729546,1.585)); +#182354 = VECTOR('',#182355,1.); +#182355 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#182356 = ORIENTED_EDGE('',*,*,#182357,.T.); +#182357 = EDGE_CURVE('',#182350,#182358,#182360,.T.); +#182358 = VERTEX_POINT('',#182359); +#182359 = CARTESIAN_POINT('',(198.089752,-92.442206,1.585)); +#182360 = LINE('',#182361,#182362); +#182361 = CARTESIAN_POINT('',(198.034719,-92.544813,1.585)); +#182362 = VECTOR('',#182363,1.); +#182363 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#182364 = ORIENTED_EDGE('',*,*,#182365,.T.); +#182365 = EDGE_CURVE('',#182358,#182124,#182366,.T.); +#182366 = LINE('',#182367,#182368); +#182367 = CARTESIAN_POINT('',(198.089752,-92.442206,1.585)); +#182368 = VECTOR('',#182369,1.); +#182369 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#182370 = PLANE('',#182371); +#182371 = AXIS2_PLACEMENT_3D('',#182372,#182373,#182374); +#182372 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182373 = DIRECTION('',(0.,0.,1.)); +#182374 = DIRECTION('',(1.,0.,-0.)); +#182375 = SHELL_BASED_SURFACE_MODEL('',(#182376)); +#182376 = OPEN_SHELL('',(#182377)); +#182377 = ADVANCED_FACE('',(#182378,#182646),#182713,.T.); +#182378 = FACE_BOUND('',#182379,.F.); +#182379 = EDGE_LOOP('',(#182380,#182390,#182398,#182406,#182414,#182422, + #182430,#182438,#182446,#182454,#182462,#182470,#182478,#182486, + #182494,#182502,#182511,#182519,#182527,#182535,#182543,#182551, + #182559,#182567,#182575,#182583,#182592,#182600,#182608,#182616, + #182624,#182632,#182640)); +#182380 = ORIENTED_EDGE('',*,*,#182381,.T.); +#182381 = EDGE_CURVE('',#182382,#182384,#182386,.T.); +#182382 = VERTEX_POINT('',#182383); +#182383 = CARTESIAN_POINT('',(82.762316,-91.900638,1.585)); +#182384 = VERTEX_POINT('',#182385); +#182385 = CARTESIAN_POINT('',(83.0446,-91.76247,1.585)); +#182386 = LINE('',#182387,#182388); +#182387 = CARTESIAN_POINT('',(82.762316,-91.900638,1.585)); +#182388 = VECTOR('',#182389,1.); +#182389 = DIRECTION('',(0.898180261532,0.439627362427,0.)); +#182390 = ORIENTED_EDGE('',*,*,#182391,.T.); +#182391 = EDGE_CURVE('',#182384,#182392,#182394,.T.); +#182392 = VERTEX_POINT('',#182393); +#182393 = CARTESIAN_POINT('',(83.084219,-91.757144,1.585)); +#182394 = LINE('',#182395,#182396); +#182395 = CARTESIAN_POINT('',(83.0446,-91.76247,1.585)); +#182396 = VECTOR('',#182397,1.); +#182397 = DIRECTION('',(0.991084879219,0.133231986338,0.)); +#182398 = ORIENTED_EDGE('',*,*,#182399,.T.); +#182399 = EDGE_CURVE('',#182392,#182400,#182402,.T.); +#182400 = VERTEX_POINT('',#182401); +#182401 = CARTESIAN_POINT('',(83.361102,-91.760026,1.585)); +#182402 = LINE('',#182403,#182404); +#182403 = CARTESIAN_POINT('',(83.084219,-91.757144,1.585)); +#182404 = VECTOR('',#182405,1.); +#182405 = DIRECTION('',(0.999945833586,-1.040816479305E-02,0.)); +#182406 = ORIENTED_EDGE('',*,*,#182407,.T.); +#182407 = EDGE_CURVE('',#182400,#182408,#182410,.T.); +#182408 = VERTEX_POINT('',#182409); +#182409 = CARTESIAN_POINT('',(83.39892,-91.77298,1.585)); +#182410 = LINE('',#182411,#182412); +#182411 = CARTESIAN_POINT('',(83.361102,-91.760026,1.585)); +#182412 = VECTOR('',#182413,1.); +#182413 = DIRECTION('',(0.946039317712,-0.32405186212,0.)); +#182414 = ORIENTED_EDGE('',*,*,#182415,.T.); +#182415 = EDGE_CURVE('',#182408,#182416,#182418,.T.); +#182416 = VERTEX_POINT('',#182417); +#182417 = CARTESIAN_POINT('',(83.671424,-91.912454,1.585)); +#182418 = LINE('',#182419,#182420); +#182419 = CARTESIAN_POINT('',(83.39892,-91.77298,1.585)); +#182420 = VECTOR('',#182421,1.); +#182421 = DIRECTION('',(0.890177487146,-0.455613917015,0.)); +#182422 = ORIENTED_EDGE('',*,*,#182423,.T.); +#182423 = EDGE_CURVE('',#182416,#182424,#182426,.T.); +#182424 = VERTEX_POINT('',#182425); +#182425 = CARTESIAN_POINT('',(83.709771,-91.956669,1.585)); +#182426 = LINE('',#182427,#182428); +#182427 = CARTESIAN_POINT('',(83.671424,-91.912454,1.585)); +#182428 = VECTOR('',#182429,1.); +#182429 = DIRECTION('',(0.655197195491,-0.755457897583,0.)); +#182430 = ORIENTED_EDGE('',*,*,#182431,.T.); +#182431 = EDGE_CURVE('',#182424,#182432,#182434,.T.); +#182432 = VERTEX_POINT('',#182433); +#182433 = CARTESIAN_POINT('',(83.84794,-92.238953,1.585)); +#182434 = LINE('',#182435,#182436); +#182435 = CARTESIAN_POINT('',(83.709771,-91.956669,1.585)); +#182436 = VECTOR('',#182437,1.); +#182437 = DIRECTION('',(0.439629929294,-0.898179005137,0.)); +#182438 = ORIENTED_EDGE('',*,*,#182439,.T.); +#182439 = EDGE_CURVE('',#182432,#182440,#182442,.T.); +#182440 = VERTEX_POINT('',#182441); +#182441 = CARTESIAN_POINT('',(83.853266,-92.278572,1.585)); +#182442 = LINE('',#182443,#182444); +#182443 = CARTESIAN_POINT('',(83.84794,-92.238953,1.585)); +#182444 = VECTOR('',#182445,1.); +#182445 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#182446 = ORIENTED_EDGE('',*,*,#182447,.T.); +#182447 = EDGE_CURVE('',#182440,#182448,#182450,.T.); +#182448 = VERTEX_POINT('',#182449); +#182449 = CARTESIAN_POINT('',(83.853266,-92.862209,1.585)); +#182450 = LINE('',#182451,#182452); +#182451 = CARTESIAN_POINT('',(83.853266,-92.278572,1.585)); +#182452 = VECTOR('',#182453,1.); +#182453 = DIRECTION('',(0.,-1.,0.)); +#182454 = ORIENTED_EDGE('',*,*,#182455,.T.); +#182455 = EDGE_CURVE('',#182448,#182456,#182458,.T.); +#182456 = VERTEX_POINT('',#182457); +#182457 = CARTESIAN_POINT('',(83.919781,-92.995239,1.585)); +#182458 = LINE('',#182459,#182460); +#182459 = CARTESIAN_POINT('',(83.853266,-92.862209,1.585)); +#182460 = VECTOR('',#182461,1.); +#182461 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#182462 = ORIENTED_EDGE('',*,*,#182463,.T.); +#182463 = EDGE_CURVE('',#182456,#182464,#182466,.T.); +#182464 = VERTEX_POINT('',#182465); +#182465 = CARTESIAN_POINT('',(84.039285,-92.995239,1.585)); +#182466 = LINE('',#182467,#182468); +#182467 = CARTESIAN_POINT('',(83.919781,-92.995239,1.585)); +#182468 = VECTOR('',#182469,1.); +#182469 = DIRECTION('',(1.,0.,0.)); +#182470 = ORIENTED_EDGE('',*,*,#182471,.T.); +#182471 = EDGE_CURVE('',#182464,#182472,#182474,.T.); +#182472 = VERTEX_POINT('',#182473); +#182473 = CARTESIAN_POINT('',(84.21051,-92.909625,1.585)); +#182474 = LINE('',#182475,#182476); +#182475 = CARTESIAN_POINT('',(84.039285,-92.995239,1.585)); +#182476 = VECTOR('',#182477,1.); +#182477 = DIRECTION('',(0.894424056772,0.447219863901,0.)); +#182478 = ORIENTED_EDGE('',*,*,#182479,.T.); +#182479 = EDGE_CURVE('',#182472,#182480,#182482,.T.); +#182480 = VERTEX_POINT('',#182481); +#182481 = CARTESIAN_POINT('',(84.296123,-92.7384,1.585)); +#182482 = LINE('',#182483,#182484); +#182483 = CARTESIAN_POINT('',(84.21051,-92.909625,1.585)); +#182484 = VECTOR('',#182485,1.); +#182485 = DIRECTION('',(0.447215684974,0.89442614626,0.)); +#182486 = ORIENTED_EDGE('',*,*,#182487,.T.); +#182487 = EDGE_CURVE('',#182480,#182488,#182490,.T.); +#182488 = VERTEX_POINT('',#182489); +#182489 = CARTESIAN_POINT('',(84.296123,-92.313981,1.585)); +#182490 = LINE('',#182491,#182492); +#182491 = CARTESIAN_POINT('',(84.296123,-92.7384,1.585)); +#182492 = VECTOR('',#182493,1.); +#182493 = DIRECTION('',(0.,1.,0.)); +#182494 = ORIENTED_EDGE('',*,*,#182495,.T.); +#182495 = EDGE_CURVE('',#182488,#182496,#182498,.T.); +#182496 = VERTEX_POINT('',#182497); +#182497 = CARTESIAN_POINT('',(84.17764,-92.070571,1.585)); +#182498 = LINE('',#182499,#182500); +#182499 = CARTESIAN_POINT('',(84.296123,-92.313981,1.585)); +#182500 = VECTOR('',#182501,1.); +#182501 = DIRECTION('',(-0.437666805127,0.899137235181,0.)); +#182502 = ORIENTED_EDGE('',*,*,#182503,.T.); +#182503 = EDGE_CURVE('',#182496,#182504,#182506,.T.); +#182504 = VERTEX_POINT('',#182505); +#182505 = CARTESIAN_POINT('',(84.440813,-91.938986,1.585)); +#182506 = CIRCLE('',#182507,0.1500002614); +#182507 = AXIS2_PLACEMENT_3D('',#182508,#182509,#182510); +#182508 = CARTESIAN_POINT('',(84.32231391962,-92.03095363761,1.585)); +#182509 = DIRECTION('',(0.,0.,-1.)); +#182510 = DIRECTION('',(-0.964491116676,-0.264115288941,-0.)); +#182511 = ORIENTED_EDGE('',*,*,#182512,.T.); +#182512 = EDGE_CURVE('',#182504,#182513,#182515,.T.); +#182513 = VERTEX_POINT('',#182514); +#182514 = CARTESIAN_POINT('',(84.590797,-92.238953,1.585)); +#182515 = LINE('',#182516,#182517); +#182516 = CARTESIAN_POINT('',(84.440813,-91.938986,1.585)); +#182517 = VECTOR('',#182518,1.); +#182518 = DIRECTION('',(0.4472147882,-0.894426594649,0.)); +#182519 = ORIENTED_EDGE('',*,*,#182520,.T.); +#182520 = EDGE_CURVE('',#182513,#182521,#182523,.T.); +#182521 = VERTEX_POINT('',#182522); +#182522 = CARTESIAN_POINT('',(84.596123,-92.278572,1.585)); +#182523 = LINE('',#182524,#182525); +#182524 = CARTESIAN_POINT('',(84.590797,-92.238953,1.585)); +#182525 = VECTOR('',#182526,1.); +#182526 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#182527 = ORIENTED_EDGE('',*,*,#182528,.T.); +#182528 = EDGE_CURVE('',#182521,#182529,#182531,.T.); +#182529 = VERTEX_POINT('',#182530); +#182530 = CARTESIAN_POINT('',(84.593241,-92.803074,1.585)); +#182531 = LINE('',#182532,#182533); +#182532 = CARTESIAN_POINT('',(84.596123,-92.278572,1.585)); +#182533 = VECTOR('',#182534,1.); +#182534 = DIRECTION('',(-5.494653012067E-03,-0.99998490428,0.)); +#182535 = ORIENTED_EDGE('',*,*,#182536,.T.); +#182536 = EDGE_CURVE('',#182529,#182537,#182539,.T.); +#182537 = VERTEX_POINT('',#182538); +#182538 = CARTESIAN_POINT('',(84.580287,-92.840892,1.585)); +#182539 = LINE('',#182540,#182541); +#182540 = CARTESIAN_POINT('',(84.593241,-92.803074,1.585)); +#182541 = VECTOR('',#182542,1.); +#182542 = DIRECTION('',(-0.32405186212,-0.946039317712,0.)); +#182543 = ORIENTED_EDGE('',*,*,#182544,.T.); +#182544 = EDGE_CURVE('',#182537,#182545,#182547,.T.); +#182545 = VERTEX_POINT('',#182546); +#182546 = CARTESIAN_POINT('',(84.440813,-93.113396,1.585)); +#182547 = LINE('',#182548,#182549); +#182548 = CARTESIAN_POINT('',(84.580287,-92.840892,1.585)); +#182549 = VECTOR('',#182550,1.); +#182550 = DIRECTION('',(-0.455613917015,-0.890177487146,0.)); +#182551 = ORIENTED_EDGE('',*,*,#182552,.T.); +#182552 = EDGE_CURVE('',#182545,#182553,#182555,.T.); +#182553 = VERTEX_POINT('',#182554); +#182554 = CARTESIAN_POINT('',(84.396598,-93.151743,1.585)); +#182555 = LINE('',#182556,#182557); +#182556 = CARTESIAN_POINT('',(84.440813,-93.113396,1.585)); +#182557 = VECTOR('',#182558,1.); +#182558 = DIRECTION('',(-0.755457897583,-0.655197195491,0.)); +#182559 = ORIENTED_EDGE('',*,*,#182560,.T.); +#182560 = EDGE_CURVE('',#182553,#182561,#182563,.T.); +#182561 = VERTEX_POINT('',#182562); +#182562 = CARTESIAN_POINT('',(84.114314,-93.289913,1.585)); +#182563 = LINE('',#182564,#182565); +#182564 = CARTESIAN_POINT('',(84.396598,-93.151743,1.585)); +#182565 = VECTOR('',#182566,1.); +#182566 = DIRECTION('',(-0.898177748738,-0.43963249615,0.)); +#182567 = ORIENTED_EDGE('',*,*,#182568,.T.); +#182568 = EDGE_CURVE('',#182561,#182569,#182571,.T.); +#182569 = VERTEX_POINT('',#182570); +#182570 = CARTESIAN_POINT('',(84.074695,-93.295239,1.585)); +#182571 = LINE('',#182572,#182573); +#182572 = CARTESIAN_POINT('',(84.114314,-93.289913,1.585)); +#182573 = VECTOR('',#182574,1.); +#182574 = DIRECTION('',(-0.991084879219,-0.133231986338,0.)); +#182575 = ORIENTED_EDGE('',*,*,#182576,.T.); +#182576 = EDGE_CURVE('',#182569,#182577,#182579,.T.); +#182577 = VERTEX_POINT('',#182578); +#182578 = CARTESIAN_POINT('',(82.683526,-93.292357,1.585)); +#182579 = LINE('',#182580,#182581); +#182580 = CARTESIAN_POINT('',(84.074695,-93.295239,1.585)); +#182581 = VECTOR('',#182582,1.); +#182582 = DIRECTION('',(-0.999997854163,2.071634586234E-03,0.)); +#182583 = ORIENTED_EDGE('',*,*,#182584,.T.); +#182584 = EDGE_CURVE('',#182577,#182585,#182587,.T.); +#182585 = VERTEX_POINT('',#182586); +#182586 = CARTESIAN_POINT('',(82.58807,-93.061903,1.585)); +#182587 = CIRCLE('',#182588,0.150000415027); +#182588 = AXIS2_PLACEMENT_3D('',#182589,#182590,#182591); +#182589 = CARTESIAN_POINT('',(82.712790630259,-93.145239,1.585)); +#182590 = DIRECTION('',(0.,0.,-1.)); +#182591 = DIRECTION('',(-0.195096995257,-0.98078395299,-0.)); +#182592 = ORIENTED_EDGE('',*,*,#182593,.T.); +#182593 = EDGE_CURVE('',#182585,#182594,#182596,.T.); +#182594 = VERTEX_POINT('',#182595); +#182595 = CARTESIAN_POINT('',(82.614174,-93.035798,1.585)); +#182596 = LINE('',#182597,#182598); +#182597 = CARTESIAN_POINT('',(82.58807,-93.061903,1.585)); +#182598 = VECTOR('',#182599,1.); +#182599 = DIRECTION('',(0.707093237285,0.707120324829,0.)); +#182600 = ORIENTED_EDGE('',*,*,#182601,.T.); +#182601 = EDGE_CURVE('',#182594,#182602,#182604,.T.); +#182602 = VERTEX_POINT('',#182603); +#182603 = CARTESIAN_POINT('',(82.568116,-92.937239,1.585)); +#182604 = LINE('',#182605,#182606); +#182605 = CARTESIAN_POINT('',(82.614174,-93.035798,1.585)); +#182606 = VECTOR('',#182607,1.); +#182607 = DIRECTION('',(-0.423366981291,0.905958276717,0.)); +#182608 = ORIENTED_EDGE('',*,*,#182609,.T.); +#182609 = EDGE_CURVE('',#182602,#182610,#182612,.T.); +#182610 = VERTEX_POINT('',#182611); +#182611 = CARTESIAN_POINT('',(82.56279,-92.89762,1.585)); +#182612 = LINE('',#182613,#182614); +#182613 = CARTESIAN_POINT('',(82.568116,-92.937239,1.585)); +#182614 = VECTOR('',#182615,1.); +#182615 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#182616 = ORIENTED_EDGE('',*,*,#182617,.T.); +#182617 = EDGE_CURVE('',#182610,#182618,#182620,.T.); +#182618 = VERTEX_POINT('',#182619); +#182619 = CARTESIAN_POINT('',(82.565672,-92.249308,1.585)); +#182620 = LINE('',#182621,#182622); +#182621 = CARTESIAN_POINT('',(82.56279,-92.89762,1.585)); +#182622 = VECTOR('',#182623,1.); +#182623 = DIRECTION('',(4.445346567864E-03,0.999990119398,0.)); +#182624 = ORIENTED_EDGE('',*,*,#182625,.T.); +#182625 = EDGE_CURVE('',#182618,#182626,#182628,.T.); +#182626 = VERTEX_POINT('',#182627); +#182627 = CARTESIAN_POINT('',(82.578626,-92.21149,1.585)); +#182628 = LINE('',#182629,#182630); +#182629 = CARTESIAN_POINT('',(82.565672,-92.249308,1.585)); +#182630 = VECTOR('',#182631,1.); +#182631 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#182632 = ORIENTED_EDGE('',*,*,#182633,.T.); +#182633 = EDGE_CURVE('',#182626,#182634,#182636,.T.); +#182634 = VERTEX_POINT('',#182635); +#182635 = CARTESIAN_POINT('',(82.718101,-91.938985,1.585)); +#182636 = LINE('',#182637,#182638); +#182637 = CARTESIAN_POINT('',(82.578626,-92.21149,1.585)); +#182638 = VECTOR('',#182639,1.); +#182639 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#182640 = ORIENTED_EDGE('',*,*,#182641,.T.); +#182641 = EDGE_CURVE('',#182634,#182382,#182642,.T.); +#182642 = LINE('',#182643,#182644); +#182643 = CARTESIAN_POINT('',(82.718101,-91.938985,1.585)); +#182644 = VECTOR('',#182645,1.); +#182645 = DIRECTION('',(0.755457897583,0.655197195491,0.)); +#182646 = FACE_BOUND('',#182647,.F.); +#182647 = EDGE_LOOP('',(#182648,#182659,#182667,#182675,#182683,#182691, + #182699,#182707)); +#182648 = ORIENTED_EDGE('',*,*,#182649,.T.); +#182649 = EDGE_CURVE('',#182650,#182652,#182654,.T.); +#182650 = VERTEX_POINT('',#182651); +#182651 = CARTESIAN_POINT('',(83.467653,-92.142756,1.585)); +#182652 = VERTEX_POINT('',#182653); +#182653 = CARTESIAN_POINT('',(82.948403,-92.142756,1.585)); +#182654 = CIRCLE('',#182655,0.400706438266); +#182655 = AXIS2_PLACEMENT_3D('',#182656,#182657,#182658); +#182656 = CARTESIAN_POINT('',(83.208028,-92.44797806513,1.585)); +#182657 = DIRECTION('',(0.,0.,1.)); +#182658 = DIRECTION('',(0.64791821445,0.761709910257,-0.)); +#182659 = ORIENTED_EDGE('',*,*,#182660,.T.); +#182660 = EDGE_CURVE('',#182652,#182661,#182663,.T.); +#182661 = VERTEX_POINT('',#182662); +#182662 = CARTESIAN_POINT('',(82.86279,-92.313982,1.585)); +#182663 = LINE('',#182664,#182665); +#182664 = CARTESIAN_POINT('',(82.948403,-92.142756,1.585)); +#182665 = VECTOR('',#182666,1.); +#182666 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#182667 = ORIENTED_EDGE('',*,*,#182668,.T.); +#182668 = EDGE_CURVE('',#182661,#182669,#182671,.T.); +#182669 = VERTEX_POINT('',#182670); +#182670 = CARTESIAN_POINT('',(82.86279,-92.862209,1.585)); +#182671 = LINE('',#182672,#182673); +#182672 = CARTESIAN_POINT('',(82.86279,-92.313982,1.585)); +#182673 = VECTOR('',#182674,1.); +#182674 = DIRECTION('',(0.,-1.,0.)); +#182675 = ORIENTED_EDGE('',*,*,#182676,.T.); +#182676 = EDGE_CURVE('',#182669,#182677,#182679,.T.); +#182677 = VERTEX_POINT('',#182678); +#182678 = CARTESIAN_POINT('',(82.929305,-92.995239,1.585)); +#182679 = LINE('',#182680,#182681); +#182680 = CARTESIAN_POINT('',(82.86279,-92.862209,1.585)); +#182681 = VECTOR('',#182682,1.); +#182682 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#182683 = ORIENTED_EDGE('',*,*,#182684,.T.); +#182684 = EDGE_CURVE('',#182677,#182685,#182687,.T.); +#182685 = VERTEX_POINT('',#182686); +#182686 = CARTESIAN_POINT('',(83.58437,-92.995239,1.585)); +#182687 = LINE('',#182688,#182689); +#182688 = CARTESIAN_POINT('',(82.929305,-92.995239,1.585)); +#182689 = VECTOR('',#182690,1.); +#182690 = DIRECTION('',(1.,0.,0.)); +#182691 = ORIENTED_EDGE('',*,*,#182692,.T.); +#182692 = EDGE_CURVE('',#182685,#182693,#182695,.T.); +#182693 = VERTEX_POINT('',#182694); +#182694 = CARTESIAN_POINT('',(83.556148,-92.926884,1.585)); +#182695 = LINE('',#182696,#182697); +#182696 = CARTESIAN_POINT('',(83.58437,-92.995239,1.585)); +#182697 = VECTOR('',#182698,1.); +#182698 = DIRECTION('',(-0.381626303138,0.924316701544,0.)); +#182699 = ORIENTED_EDGE('',*,*,#182700,.T.); +#182700 = EDGE_CURVE('',#182693,#182701,#182703,.T.); +#182701 = VERTEX_POINT('',#182702); +#182702 = CARTESIAN_POINT('',(83.553266,-92.313981,1.585)); +#182703 = LINE('',#182704,#182705); +#182704 = CARTESIAN_POINT('',(83.556148,-92.926884,1.585)); +#182705 = VECTOR('',#182706,1.); +#182706 = DIRECTION('',(-4.702160274733E-03,0.999988944783,0.)); +#182707 = ORIENTED_EDGE('',*,*,#182708,.T.); +#182708 = EDGE_CURVE('',#182701,#182650,#182709,.T.); +#182709 = LINE('',#182710,#182711); +#182710 = CARTESIAN_POINT('',(83.553266,-92.313981,1.585)); +#182711 = VECTOR('',#182712,1.); +#182712 = DIRECTION('',(-0.447215684974,0.89442614626,0.)); +#182713 = PLANE('',#182714); +#182714 = AXIS2_PLACEMENT_3D('',#182715,#182716,#182717); +#182715 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182716 = DIRECTION('',(0.,0.,1.)); +#182717 = DIRECTION('',(1.,0.,-0.)); +#182718 = SHELL_BASED_SURFACE_MODEL('',(#182719)); +#182719 = OPEN_SHELL('',(#182720)); +#182720 = ADVANCED_FACE('',(#182721,#182822),#182905,.T.); +#182721 = FACE_BOUND('',#182722,.F.); +#182722 = EDGE_LOOP('',(#182723,#182734,#182742,#182750,#182758,#182767, + #182775,#182783,#182791,#182799,#182807,#182816)); +#182723 = ORIENTED_EDGE('',*,*,#182724,.T.); +#182724 = EDGE_CURVE('',#182725,#182727,#182729,.T.); +#182725 = VERTEX_POINT('',#182726); +#182726 = CARTESIAN_POINT('',(171.920714,-92.329597,1.585)); +#182727 = VERTEX_POINT('',#182728); +#182728 = CARTESIAN_POINT('',(171.985714,-92.264597,1.585)); +#182729 = CIRCLE('',#182730,6.500103935386E-02); +#182730 = AXIS2_PLACEMENT_3D('',#182731,#182732,#182733); +#182731 = CARTESIAN_POINT('',(171.98571503934,-92.32959803934,1.585)); +#182732 = DIRECTION('',(0.,0.,-1.)); +#182733 = DIRECTION('',(-0.999999999872,1.598967539908E-05,0.)); +#182734 = ORIENTED_EDGE('',*,*,#182735,.T.); +#182735 = EDGE_CURVE('',#182727,#182736,#182738,.T.); +#182736 = VERTEX_POINT('',#182737); +#182737 = CARTESIAN_POINT('',(172.210222,-92.26663,1.585)); +#182738 = LINE('',#182739,#182740); +#182739 = CARTESIAN_POINT('',(171.985714,-92.264597,1.585)); +#182740 = VECTOR('',#182741,1.); +#182741 = DIRECTION('',(0.99995900278,-9.054985357594E-03,0.)); +#182742 = ORIENTED_EDGE('',*,*,#182743,.T.); +#182743 = EDGE_CURVE('',#182736,#182744,#182746,.T.); +#182744 = VERTEX_POINT('',#182745); +#182745 = CARTESIAN_POINT('',(172.36211,-92.318191,1.585)); +#182746 = LINE('',#182747,#182748); +#182747 = CARTESIAN_POINT('',(172.210222,-92.26663,1.585)); +#182748 = VECTOR('',#182749,1.); +#182749 = DIRECTION('',(0.946926388211,-0.321450486559,0.)); +#182750 = ORIENTED_EDGE('',*,*,#182751,.T.); +#182751 = EDGE_CURVE('',#182744,#182752,#182754,.T.); +#182752 = VERTEX_POINT('',#182753); +#182753 = CARTESIAN_POINT('',(172.466037,-92.42087,1.585)); +#182754 = LINE('',#182755,#182756); +#182755 = CARTESIAN_POINT('',(172.36211,-92.318191,1.585)); +#182756 = VECTOR('',#182757,1.); +#182757 = DIRECTION('',(0.711365069748,-0.70282269282,0.)); +#182758 = ORIENTED_EDGE('',*,*,#182759,.T.); +#182759 = EDGE_CURVE('',#182752,#182760,#182762,.T.); +#182760 = VERTEX_POINT('',#182761); +#182761 = CARTESIAN_POINT('',(172.563059,-92.859647,1.585)); +#182762 = CIRCLE('',#182763,0.67543082859); +#182763 = AXIS2_PLACEMENT_3D('',#182764,#182765,#182766); +#182764 = CARTESIAN_POINT('',(171.89260778858,-92.77778139475,1.585)); +#182765 = DIRECTION('',(0.,0.,-1.)); +#182766 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#182767 = ORIENTED_EDGE('',*,*,#182768,.T.); +#182768 = EDGE_CURVE('',#182760,#182769,#182771,.T.); +#182769 = VERTEX_POINT('',#182770); +#182770 = CARTESIAN_POINT('',(172.515281,-93.04438,1.585)); +#182771 = LINE('',#182772,#182773); +#182772 = CARTESIAN_POINT('',(172.563059,-92.859647,1.585)); +#182773 = VECTOR('',#182774,1.); +#182774 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#182775 = ORIENTED_EDGE('',*,*,#182776,.T.); +#182776 = EDGE_CURVE('',#182769,#182777,#182779,.T.); +#182777 = VERTEX_POINT('',#182778); +#182778 = CARTESIAN_POINT('',(172.460248,-93.146987,1.585)); +#182779 = LINE('',#182780,#182781); +#182780 = CARTESIAN_POINT('',(172.515281,-93.04438,1.585)); +#182781 = VECTOR('',#182782,1.); +#182782 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#182783 = ORIENTED_EDGE('',*,*,#182784,.T.); +#182784 = EDGE_CURVE('',#182777,#182785,#182787,.T.); +#182785 = VERTEX_POINT('',#182786); +#182786 = CARTESIAN_POINT('',(172.362114,-93.240999,1.585)); +#182787 = LINE('',#182788,#182789); +#182788 = CARTESIAN_POINT('',(172.460248,-93.146987,1.585)); +#182789 = VECTOR('',#182790,1.); +#182790 = DIRECTION('',(-0.722109804107,-0.691778455007,0.)); +#182791 = ORIENTED_EDGE('',*,*,#182792,.T.); +#182792 = EDGE_CURVE('',#182785,#182793,#182795,.T.); +#182793 = VERTEX_POINT('',#182794); +#182794 = CARTESIAN_POINT('',(172.210222,-93.292563,1.585)); +#182795 = LINE('',#182796,#182797); +#182796 = CARTESIAN_POINT('',(172.362114,-93.240999,1.585)); +#182797 = VECTOR('',#182798,1.); +#182798 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#182799 = ORIENTED_EDGE('',*,*,#182800,.T.); +#182800 = EDGE_CURVE('',#182793,#182801,#182803,.T.); +#182801 = VERTEX_POINT('',#182802); +#182802 = CARTESIAN_POINT('',(171.985714,-93.294597,1.585)); +#182803 = LINE('',#182804,#182805); +#182804 = CARTESIAN_POINT('',(172.210222,-93.292563,1.585)); +#182805 = VECTOR('',#182806,1.); +#182806 = DIRECTION('',(-0.999958962441,-9.059438993706E-03,0.)); +#182807 = ORIENTED_EDGE('',*,*,#182808,.T.); +#182808 = EDGE_CURVE('',#182801,#182809,#182811,.T.); +#182809 = VERTEX_POINT('',#182810); +#182810 = CARTESIAN_POINT('',(171.920714,-93.229597,1.585)); +#182811 = CIRCLE('',#182812,6.500103935386E-02); +#182812 = AXIS2_PLACEMENT_3D('',#182813,#182814,#182815); +#182813 = CARTESIAN_POINT('',(171.98571503934,-93.22959596065,1.585)); +#182814 = DIRECTION('',(0.,0.,-1.)); +#182815 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#182816 = ORIENTED_EDGE('',*,*,#182817,.T.); +#182817 = EDGE_CURVE('',#182809,#182725,#182818,.T.); +#182818 = LINE('',#182819,#182820); +#182819 = CARTESIAN_POINT('',(171.920714,-93.229597,1.585)); +#182820 = VECTOR('',#182821,1.); +#182821 = DIRECTION('',(0.,1.,0.)); +#182822 = FACE_BOUND('',#182823,.F.); +#182823 = EDGE_LOOP('',(#182824,#182834,#182842,#182850,#182858,#182866, + #182874,#182883,#182891,#182899)); +#182824 = ORIENTED_EDGE('',*,*,#182825,.T.); +#182825 = EDGE_CURVE('',#182826,#182828,#182830,.T.); +#182826 = VERTEX_POINT('',#182827); +#182827 = CARTESIAN_POINT('',(172.293458,-92.429265,1.585)); +#182828 = VERTEX_POINT('',#182829); +#182829 = CARTESIAN_POINT('',(172.189453,-92.394597,1.585)); +#182830 = LINE('',#182831,#182832); +#182831 = CARTESIAN_POINT('',(172.293458,-92.429265,1.585)); +#182832 = VECTOR('',#182833,1.); +#182833 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#182834 = ORIENTED_EDGE('',*,*,#182835,.T.); +#182835 = EDGE_CURVE('',#182828,#182836,#182838,.T.); +#182836 = VERTEX_POINT('',#182837); +#182837 = CARTESIAN_POINT('',(172.050714,-92.394597,1.585)); +#182838 = LINE('',#182839,#182840); +#182839 = CARTESIAN_POINT('',(172.189453,-92.394597,1.585)); +#182840 = VECTOR('',#182841,1.); +#182841 = DIRECTION('',(-1.,0.,0.)); +#182842 = ORIENTED_EDGE('',*,*,#182843,.T.); +#182843 = EDGE_CURVE('',#182836,#182844,#182846,.T.); +#182844 = VERTEX_POINT('',#182845); +#182845 = CARTESIAN_POINT('',(172.050714,-93.164597,1.585)); +#182846 = LINE('',#182847,#182848); +#182847 = CARTESIAN_POINT('',(172.050714,-92.394597,1.585)); +#182848 = VECTOR('',#182849,1.); +#182849 = DIRECTION('',(0.,-1.,0.)); +#182850 = ORIENTED_EDGE('',*,*,#182851,.T.); +#182851 = EDGE_CURVE('',#182844,#182852,#182854,.T.); +#182852 = VERTEX_POINT('',#182853); +#182853 = CARTESIAN_POINT('',(172.189453,-93.164597,1.585)); +#182854 = LINE('',#182855,#182856); +#182855 = CARTESIAN_POINT('',(172.050714,-93.164597,1.585)); +#182856 = VECTOR('',#182857,1.); +#182857 = DIRECTION('',(1.,0.,0.)); +#182858 = ORIENTED_EDGE('',*,*,#182859,.T.); +#182859 = EDGE_CURVE('',#182852,#182860,#182862,.T.); +#182860 = VERTEX_POINT('',#182861); +#182861 = CARTESIAN_POINT('',(172.293458,-93.129928,1.585)); +#182862 = LINE('',#182863,#182864); +#182863 = CARTESIAN_POINT('',(172.189453,-93.164597,1.585)); +#182864 = VECTOR('',#182865,1.); +#182865 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#182866 = ORIENTED_EDGE('',*,*,#182867,.T.); +#182867 = EDGE_CURVE('',#182860,#182868,#182870,.T.); +#182868 = VERTEX_POINT('',#182869); +#182869 = CARTESIAN_POINT('',(172.360865,-93.062522,1.585)); +#182870 = LINE('',#182871,#182872); +#182871 = CARTESIAN_POINT('',(172.293458,-93.129928,1.585)); +#182872 = VECTOR('',#182873,1.); +#182873 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#182874 = ORIENTED_EDGE('',*,*,#182875,.T.); +#182875 = EDGE_CURVE('',#182868,#182876,#182878,.T.); +#182876 = VERTEX_POINT('',#182877); +#182877 = CARTESIAN_POINT('',(172.435,-92.723311,1.585)); +#182878 = CIRCLE('',#182879,0.553325470752); +#182879 = AXIS2_PLACEMENT_3D('',#182880,#182881,#182882); +#182880 = CARTESIAN_POINT('',(171.88466292366,-92.78074077444,1.585)); +#182881 = DIRECTION('',(0.,0.,1.)); +#182882 = DIRECTION('',(0.860618390997,-0.509250414902,0.)); +#182883 = ORIENTED_EDGE('',*,*,#182884,.T.); +#182884 = EDGE_CURVE('',#182876,#182885,#182887,.T.); +#182885 = VERTEX_POINT('',#182886); +#182886 = CARTESIAN_POINT('',(172.395814,-92.56657,1.585)); +#182887 = LINE('',#182888,#182889); +#182888 = CARTESIAN_POINT('',(172.435,-92.723311,1.585)); +#182889 = VECTOR('',#182890,1.); +#182890 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#182891 = ORIENTED_EDGE('',*,*,#182892,.T.); +#182892 = EDGE_CURVE('',#182885,#182893,#182895,.T.); +#182893 = VERTEX_POINT('',#182894); +#182894 = CARTESIAN_POINT('',(172.360864,-92.496669,1.585)); +#182895 = LINE('',#182896,#182897); +#182896 = CARTESIAN_POINT('',(172.395814,-92.56657,1.585)); +#182897 = VECTOR('',#182898,1.); +#182898 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#182899 = ORIENTED_EDGE('',*,*,#182900,.T.); +#182900 = EDGE_CURVE('',#182893,#182826,#182901,.T.); +#182901 = LINE('',#182902,#182903); +#182902 = CARTESIAN_POINT('',(172.360864,-92.496669,1.585)); +#182903 = VECTOR('',#182904,1.); +#182904 = DIRECTION('',(-0.707117271529,0.707096290688,0.)); +#182905 = PLANE('',#182906); +#182906 = AXIS2_PLACEMENT_3D('',#182907,#182908,#182909); +#182907 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182908 = DIRECTION('',(0.,0.,1.)); +#182909 = DIRECTION('',(1.,0.,-0.)); +#182910 = SHELL_BASED_SURFACE_MODEL('',(#182911)); +#182911 = OPEN_SHELL('',(#182912)); +#182912 = ADVANCED_FACE('',(#182913),#183031,.T.); +#182913 = FACE_BOUND('',#182914,.F.); +#182914 = EDGE_LOOP('',(#182915,#182926,#182934,#182942,#182950,#182958, + #182966,#182974,#182983,#182991,#183000,#183008,#183016,#183025)); +#182915 = ORIENTED_EDGE('',*,*,#182916,.T.); +#182916 = EDGE_CURVE('',#182917,#182919,#182921,.T.); +#182917 = VERTEX_POINT('',#182918); +#182918 = CARTESIAN_POINT('',(170.977857,-92.329597,1.585)); +#182919 = VERTEX_POINT('',#182920); +#182920 = CARTESIAN_POINT('',(171.03466,-92.265116,1.585)); +#182921 = CIRCLE('',#182922,6.499996854972E-02); +#182922 = AXIS2_PLACEMENT_3D('',#182923,#182924,#182925); +#182923 = CARTESIAN_POINT('',(171.04285696855,-92.32959704851,1.585)); +#182924 = DIRECTION('',(0.,0.,-1.)); +#182925 = DIRECTION('',(-1.,7.464405904505E-07,0.)); +#182926 = ORIENTED_EDGE('',*,*,#182927,.T.); +#182927 = EDGE_CURVE('',#182919,#182928,#182930,.T.); +#182928 = VERTEX_POINT('',#182929); +#182929 = CARTESIAN_POINT('',(171.050899,-92.269545,1.585)); +#182930 = LINE('',#182931,#182932); +#182931 = CARTESIAN_POINT('',(171.03466,-92.265116,1.585)); +#182932 = VECTOR('',#182933,1.); +#182933 = DIRECTION('',(0.96476107918,-0.263127459799,0.)); +#182934 = ORIENTED_EDGE('',*,*,#182935,.T.); +#182935 = EDGE_CURVE('',#182928,#182936,#182938,.T.); +#182936 = VERTEX_POINT('',#182937); +#182937 = CARTESIAN_POINT('',(171.067731,-92.269545,1.585)); +#182938 = LINE('',#182939,#182940); +#182939 = CARTESIAN_POINT('',(171.050899,-92.269545,1.585)); +#182940 = VECTOR('',#182941,1.); +#182941 = DIRECTION('',(1.,0.,0.)); +#182942 = ORIENTED_EDGE('',*,*,#182943,.T.); +#182943 = EDGE_CURVE('',#182936,#182944,#182946,.T.); +#182944 = VERTEX_POINT('',#182945); +#182945 = CARTESIAN_POINT('',(171.082656,-92.278206,1.585)); +#182946 = LINE('',#182947,#182948); +#182947 = CARTESIAN_POINT('',(171.067731,-92.269545,1.585)); +#182948 = VECTOR('',#182949,1.); +#182949 = DIRECTION('',(0.86491798857,-0.501913212665,0.)); +#182950 = ORIENTED_EDGE('',*,*,#182951,.T.); +#182951 = EDGE_CURVE('',#182944,#182952,#182954,.T.); +#182952 = VERTEX_POINT('',#182953); +#182953 = CARTESIAN_POINT('',(171.099293,-92.297348,1.585)); +#182954 = LINE('',#182955,#182956); +#182955 = CARTESIAN_POINT('',(171.082656,-92.278206,1.585)); +#182956 = VECTOR('',#182957,1.); +#182957 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#182958 = ORIENTED_EDGE('',*,*,#182959,.T.); +#182959 = EDGE_CURVE('',#182952,#182960,#182962,.T.); +#182960 = VERTEX_POINT('',#182961); +#182961 = CARTESIAN_POINT('',(171.492143,-92.984835,1.585)); +#182962 = LINE('',#182963,#182964); +#182963 = CARTESIAN_POINT('',(171.099293,-92.297348,1.585)); +#182964 = VECTOR('',#182965,1.); +#182965 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#182966 = ORIENTED_EDGE('',*,*,#182967,.T.); +#182967 = EDGE_CURVE('',#182960,#182968,#182970,.T.); +#182968 = VERTEX_POINT('',#182969); +#182969 = CARTESIAN_POINT('',(171.492143,-92.329597,1.585)); +#182970 = LINE('',#182971,#182972); +#182971 = CARTESIAN_POINT('',(171.492143,-92.984835,1.585)); +#182972 = VECTOR('',#182973,1.); +#182973 = DIRECTION('',(0.,1.,0.)); +#182974 = ORIENTED_EDGE('',*,*,#182975,.T.); +#182975 = EDGE_CURVE('',#182968,#182976,#182978,.T.); +#182976 = VERTEX_POINT('',#182977); +#182977 = CARTESIAN_POINT('',(171.622143,-92.329597,1.585)); +#182978 = CIRCLE('',#182979,6.500000000091E-02); +#182979 = AXIS2_PLACEMENT_3D('',#182980,#182981,#182982); +#182980 = CARTESIAN_POINT('',(171.557143,-92.32959734486,1.585)); +#182981 = DIRECTION('',(0.,0.,-1.)); +#182982 = DIRECTION('',(-0.999999999986,5.305658025669E-06,0.)); +#182983 = ORIENTED_EDGE('',*,*,#182984,.T.); +#182984 = EDGE_CURVE('',#182976,#182985,#182987,.T.); +#182985 = VERTEX_POINT('',#182986); +#182986 = CARTESIAN_POINT('',(171.622143,-93.229597,1.585)); +#182987 = LINE('',#182988,#182989); +#182988 = CARTESIAN_POINT('',(171.622143,-92.329597,1.585)); +#182989 = VECTOR('',#182990,1.); +#182990 = DIRECTION('',(0.,-1.,0.)); +#182991 = ORIENTED_EDGE('',*,*,#182992,.T.); +#182992 = EDGE_CURVE('',#182985,#182993,#182995,.T.); +#182993 = VERTEX_POINT('',#182994); +#182994 = CARTESIAN_POINT('',(171.500707,-93.261846,1.585)); +#182995 = CIRCLE('',#182996,6.500021194141E-02); +#182996 = AXIS2_PLACEMENT_3D('',#182997,#182998,#182999); +#182997 = CARTESIAN_POINT('',(171.55714278806,-93.22959651351,1.585)); +#182998 = DIRECTION('',(-0.,0.,-1.)); +#182999 = DIRECTION('',(0.999999999972,-7.484332115461E-06,-0.)); +#183000 = ORIENTED_EDGE('',*,*,#183001,.T.); +#183001 = EDGE_CURVE('',#182993,#183002,#183004,.T.); +#183002 = VERTEX_POINT('',#183003); +#183003 = CARTESIAN_POINT('',(171.107857,-92.574358,1.585)); +#183004 = LINE('',#183005,#183006); +#183005 = CARTESIAN_POINT('',(171.500707,-93.261846,1.585)); +#183006 = VECTOR('',#183007,1.); +#183007 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#183008 = ORIENTED_EDGE('',*,*,#183009,.T.); +#183009 = EDGE_CURVE('',#183002,#183010,#183012,.T.); +#183010 = VERTEX_POINT('',#183011); +#183011 = CARTESIAN_POINT('',(171.107857,-93.229597,1.585)); +#183012 = LINE('',#183013,#183014); +#183013 = CARTESIAN_POINT('',(171.107857,-92.574358,1.585)); +#183014 = VECTOR('',#183015,1.); +#183015 = DIRECTION('',(0.,-1.,0.)); +#183016 = ORIENTED_EDGE('',*,*,#183017,.T.); +#183017 = EDGE_CURVE('',#183010,#183018,#183020,.T.); +#183018 = VERTEX_POINT('',#183019); +#183019 = CARTESIAN_POINT('',(170.977857,-93.229597,1.585)); +#183020 = CIRCLE('',#183021,6.500000000091E-02); +#183021 = AXIS2_PLACEMENT_3D('',#183022,#183023,#183024); +#183022 = CARTESIAN_POINT('',(171.042857,-93.22959665513,1.585)); +#183023 = DIRECTION('',(-0.,0.,-1.)); +#183024 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#183025 = ORIENTED_EDGE('',*,*,#183026,.T.); +#183026 = EDGE_CURVE('',#183018,#182917,#183027,.T.); +#183027 = LINE('',#183028,#183029); +#183028 = CARTESIAN_POINT('',(170.977857,-93.229597,1.585)); +#183029 = VECTOR('',#183030,1.); +#183030 = DIRECTION('',(0.,1.,0.)); +#183031 = PLANE('',#183032); +#183032 = AXIS2_PLACEMENT_3D('',#183033,#183034,#183035); +#183033 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183034 = DIRECTION('',(0.,0.,1.)); +#183035 = DIRECTION('',(1.,0.,-0.)); +#183036 = SHELL_BASED_SURFACE_MODEL('',(#183037)); +#183037 = OPEN_SHELL('',(#183038)); +#183038 = ADVANCED_FACE('',(#183039),#183289,.T.); +#183039 = FACE_BOUND('',#183040,.F.); +#183040 = EDGE_LOOP('',(#183041,#183051,#183059,#183068,#183076,#183085, + #183093,#183101,#183109,#183117,#183126,#183134,#183142,#183150, + #183159,#183167,#183175,#183183,#183192,#183200,#183209,#183217, + #183225,#183233,#183241,#183250,#183258,#183267,#183275,#183283)); +#183041 = ORIENTED_EDGE('',*,*,#183042,.T.); +#183042 = EDGE_CURVE('',#183043,#183045,#183047,.T.); +#183043 = VERTEX_POINT('',#183044); +#183044 = CARTESIAN_POINT('',(170.237892,-92.31819,1.585)); +#183045 = VERTEX_POINT('',#183046); +#183046 = CARTESIAN_POINT('',(170.389777,-92.26663,1.585)); +#183047 = LINE('',#183048,#183049); +#183048 = CARTESIAN_POINT('',(170.237892,-92.31819,1.585)); +#183049 = VECTOR('',#183050,1.); +#183050 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#183051 = ORIENTED_EDGE('',*,*,#183052,.T.); +#183052 = EDGE_CURVE('',#183045,#183053,#183055,.T.); +#183053 = VERTEX_POINT('',#183054); +#183054 = CARTESIAN_POINT('',(170.531765,-92.265232,1.585)); +#183055 = LINE('',#183056,#183057); +#183056 = CARTESIAN_POINT('',(170.389777,-92.26663,1.585)); +#183057 = VECTOR('',#183058,1.); +#183058 = DIRECTION('',(0.999951532626,9.845425265658E-03,0.)); +#183059 = ORIENTED_EDGE('',*,*,#183060,.T.); +#183060 = EDGE_CURVE('',#183053,#183061,#183063,.T.); +#183061 = VERTEX_POINT('',#183062); +#183062 = CARTESIAN_POINT('',(170.66339,-92.329866,1.585)); +#183063 = CIRCLE('',#183064,0.276414597198); +#183064 = AXIS2_PLACEMENT_3D('',#183065,#183066,#183067); +#183065 = CARTESIAN_POINT('',(170.48010572554,-92.53677637741,1.585)); +#183066 = DIRECTION('',(0.,0.,-1.)); +#183067 = DIRECTION('',(0.186890544039,0.982380743169,0.)); +#183068 = ORIENTED_EDGE('',*,*,#183069,.T.); +#183069 = EDGE_CURVE('',#183061,#183070,#183072,.T.); +#183070 = VERTEX_POINT('',#183071); +#183071 = CARTESIAN_POINT('',(170.679122,-92.377062,1.585)); +#183072 = LINE('',#183073,#183074); +#183073 = CARTESIAN_POINT('',(170.66339,-92.329866,1.585)); +#183074 = VECTOR('',#183075,1.); +#183075 = DIRECTION('',(0.316227766017,-0.94868329805,0.)); +#183076 = ORIENTED_EDGE('',*,*,#183077,.T.); +#183077 = EDGE_CURVE('',#183070,#183078,#183080,.T.); +#183078 = VERTEX_POINT('',#183079); +#183079 = CARTESIAN_POINT('',(170.585217,-92.430592,1.585)); +#183080 = CIRCLE('',#183081,6.50002600426E-02); +#183081 = AXIS2_PLACEMENT_3D('',#183082,#183083,#183084); +#183082 = CARTESIAN_POINT('',(170.61428530559,-92.37245365279,1.585)); +#183083 = DIRECTION('',(0.,0.,-1.)); +#183084 = DIRECTION('',(0.997483615677,-7.089736565066E-02,0.)); +#183085 = ORIENTED_EDGE('',*,*,#183086,.T.); +#183086 = EDGE_CURVE('',#183078,#183087,#183089,.T.); +#183087 = VERTEX_POINT('',#183088); +#183088 = CARTESIAN_POINT('',(170.513227,-92.394597,1.585)); +#183089 = LINE('',#183090,#183091); +#183090 = CARTESIAN_POINT('',(170.585217,-92.430592,1.585)); +#183091 = VECTOR('',#183092,1.); +#183092 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#183093 = ORIENTED_EDGE('',*,*,#183094,.T.); +#183094 = EDGE_CURVE('',#183087,#183095,#183097,.T.); +#183095 = VERTEX_POINT('',#183096); +#183096 = CARTESIAN_POINT('',(170.410547,-92.394597,1.585)); +#183097 = LINE('',#183098,#183099); +#183098 = CARTESIAN_POINT('',(170.513227,-92.394597,1.585)); +#183099 = VECTOR('',#183100,1.); +#183100 = DIRECTION('',(-1.,0.,0.)); +#183101 = ORIENTED_EDGE('',*,*,#183102,.T.); +#183102 = EDGE_CURVE('',#183095,#183103,#183105,.T.); +#183103 = VERTEX_POINT('',#183104); +#183104 = CARTESIAN_POINT('',(170.306541,-92.429265,1.585)); +#183105 = LINE('',#183106,#183107); +#183106 = CARTESIAN_POINT('',(170.410547,-92.394597,1.585)); +#183107 = VECTOR('',#183108,1.); +#183108 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#183109 = ORIENTED_EDGE('',*,*,#183110,.T.); +#183110 = EDGE_CURVE('',#183103,#183111,#183113,.T.); +#183111 = VERTEX_POINT('',#183112); +#183112 = CARTESIAN_POINT('',(170.239134,-92.496671,1.585)); +#183113 = LINE('',#183114,#183115); +#183114 = CARTESIAN_POINT('',(170.306541,-92.429265,1.585)); +#183115 = VECTOR('',#183116,1.); +#183116 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#183117 = ORIENTED_EDGE('',*,*,#183118,.T.); +#183118 = EDGE_CURVE('',#183111,#183119,#183121,.T.); +#183119 = VERTEX_POINT('',#183120); +#183120 = CARTESIAN_POINT('',(170.165,-92.835881,1.585)); +#183121 = CIRCLE('',#183122,0.553307903116); +#183122 = AXIS2_PLACEMENT_3D('',#183123,#183124,#183125); +#183123 = CARTESIAN_POINT('',(170.71531893982,-92.77844668868,1.585)); +#183124 = DIRECTION('',(0.,0.,1.)); +#183125 = DIRECTION('',(-0.860614744786,0.509256576842,0.)); +#183126 = ORIENTED_EDGE('',*,*,#183127,.T.); +#183127 = EDGE_CURVE('',#183119,#183128,#183130,.T.); +#183128 = VERTEX_POINT('',#183129); +#183129 = CARTESIAN_POINT('',(170.204185,-92.992622,1.585)); +#183130 = LINE('',#183131,#183132); +#183131 = CARTESIAN_POINT('',(170.165,-92.835881,1.585)); +#183132 = VECTOR('',#183133,1.); +#183133 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#183134 = ORIENTED_EDGE('',*,*,#183135,.T.); +#183135 = EDGE_CURVE('',#183128,#183136,#183138,.T.); +#183136 = VERTEX_POINT('',#183137); +#183137 = CARTESIAN_POINT('',(170.239135,-93.062522,1.585)); +#183138 = LINE('',#183139,#183140); +#183139 = CARTESIAN_POINT('',(170.204185,-92.992622,1.585)); +#183140 = VECTOR('',#183141,1.); +#183141 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#183142 = ORIENTED_EDGE('',*,*,#183143,.T.); +#183143 = EDGE_CURVE('',#183136,#183144,#183146,.T.); +#183144 = VERTEX_POINT('',#183145); +#183145 = CARTESIAN_POINT('',(170.306541,-93.129928,1.585)); +#183146 = LINE('',#183147,#183148); +#183147 = CARTESIAN_POINT('',(170.239135,-93.062522,1.585)); +#183148 = VECTOR('',#183149,1.); +#183149 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183150 = ORIENTED_EDGE('',*,*,#183151,.T.); +#183151 = EDGE_CURVE('',#183144,#183152,#183154,.T.); +#183152 = VERTEX_POINT('',#183153); +#183153 = CARTESIAN_POINT('',(170.579175,-93.129927,1.585)); +#183154 = CIRCLE('',#183155,0.272195913583); +#183155 = AXIS2_PLACEMENT_3D('',#183156,#183157,#183158); +#183156 = CARTESIAN_POINT('',(170.44285713583,-92.89432552445,1.585)); +#183157 = DIRECTION('',(0.,0.,1.)); +#183158 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#183159 = ORIENTED_EDGE('',*,*,#183160,.T.); +#183160 = EDGE_CURVE('',#183152,#183161,#183163,.T.); +#183161 = VERTEX_POINT('',#183162); +#183162 = CARTESIAN_POINT('',(170.592143,-93.116958,1.585)); +#183163 = LINE('',#183164,#183165); +#183164 = CARTESIAN_POINT('',(170.579175,-93.129927,1.585)); +#183165 = VECTOR('',#183166,1.); +#183166 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#183167 = ORIENTED_EDGE('',*,*,#183168,.T.); +#183168 = EDGE_CURVE('',#183161,#183169,#183171,.T.); +#183169 = VERTEX_POINT('',#183170); +#183170 = CARTESIAN_POINT('',(170.592143,-92.908882,1.585)); +#183171 = LINE('',#183172,#183173); +#183172 = CARTESIAN_POINT('',(170.592143,-93.116958,1.585)); +#183173 = VECTOR('',#183174,1.); +#183174 = DIRECTION('',(0.,1.,0.)); +#183175 = ORIENTED_EDGE('',*,*,#183176,.T.); +#183176 = EDGE_CURVE('',#183169,#183177,#183179,.T.); +#183177 = VERTEX_POINT('',#183178); +#183178 = CARTESIAN_POINT('',(170.485714,-92.908882,1.585)); +#183179 = LINE('',#183180,#183181); +#183180 = CARTESIAN_POINT('',(170.592143,-92.908882,1.585)); +#183181 = VECTOR('',#183182,1.); +#183182 = DIRECTION('',(-1.,0.,0.)); +#183183 = ORIENTED_EDGE('',*,*,#183184,.T.); +#183184 = EDGE_CURVE('',#183177,#183185,#183187,.T.); +#183185 = VERTEX_POINT('',#183186); +#183186 = CARTESIAN_POINT('',(170.485714,-92.778882,1.585)); +#183187 = CIRCLE('',#183188,6.500000000093E-02); +#183188 = AXIS2_PLACEMENT_3D('',#183189,#183190,#183191); +#183189 = CARTESIAN_POINT('',(170.48571434486,-92.843882,1.585)); +#183190 = DIRECTION('',(0.,0.,-1.)); +#183191 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#183192 = ORIENTED_EDGE('',*,*,#183193,.T.); +#183193 = EDGE_CURVE('',#183185,#183194,#183196,.T.); +#183194 = VERTEX_POINT('',#183195); +#183195 = CARTESIAN_POINT('',(170.657143,-92.778882,1.585)); +#183196 = LINE('',#183197,#183198); +#183197 = CARTESIAN_POINT('',(170.485714,-92.778882,1.585)); +#183198 = VECTOR('',#183199,1.); +#183199 = DIRECTION('',(1.,0.,0.)); +#183200 = ORIENTED_EDGE('',*,*,#183201,.T.); +#183201 = EDGE_CURVE('',#183194,#183202,#183204,.T.); +#183202 = VERTEX_POINT('',#183203); +#183203 = CARTESIAN_POINT('',(170.722143,-92.843882,1.585)); +#183204 = CIRCLE('',#183205,6.500103935386E-02); +#183205 = AXIS2_PLACEMENT_3D('',#183206,#183207,#183208); +#183206 = CARTESIAN_POINT('',(170.65714196065,-92.84388303934,1.585)); +#183207 = DIRECTION('',(0.,0.,-1.)); +#183208 = DIRECTION('',(1.598967605495E-05,0.999999999872,0.)); +#183209 = ORIENTED_EDGE('',*,*,#183210,.T.); +#183210 = EDGE_CURVE('',#183202,#183211,#183213,.T.); +#183211 = VERTEX_POINT('',#183212); +#183212 = CARTESIAN_POINT('',(170.722143,-93.143882,1.585)); +#183213 = LINE('',#183214,#183215); +#183214 = CARTESIAN_POINT('',(170.722143,-92.843882,1.585)); +#183215 = VECTOR('',#183216,1.); +#183216 = DIRECTION('',(0.,-1.,0.)); +#183217 = ORIENTED_EDGE('',*,*,#183218,.T.); +#183218 = EDGE_CURVE('',#183211,#183219,#183221,.T.); +#183219 = VERTEX_POINT('',#183220); +#183220 = CARTESIAN_POINT('',(170.717195,-93.168756,1.585)); +#183221 = LINE('',#183222,#183223); +#183222 = CARTESIAN_POINT('',(170.722143,-93.143882,1.585)); +#183223 = VECTOR('',#183224,1.); +#183224 = DIRECTION('',(-0.19509994748,-0.98078336573,0.)); +#183225 = ORIENTED_EDGE('',*,*,#183226,.T.); +#183226 = EDGE_CURVE('',#183219,#183227,#183229,.T.); +#183227 = VERTEX_POINT('',#183228); +#183228 = CARTESIAN_POINT('',(170.703106,-93.189843,1.585)); +#183229 = LINE('',#183230,#183231); +#183230 = CARTESIAN_POINT('',(170.717195,-93.168756,1.585)); +#183231 = VECTOR('',#183232,1.); +#183232 = DIRECTION('',(-0.555546163521,-0.831485694524,0.)); +#183233 = ORIENTED_EDGE('',*,*,#183234,.T.); +#183234 = EDGE_CURVE('',#183227,#183235,#183237,.T.); +#183235 = VERTEX_POINT('',#183236); +#183236 = CARTESIAN_POINT('',(170.647819,-93.241005,1.585)); +#183237 = LINE('',#183238,#183239); +#183238 = CARTESIAN_POINT('',(170.703106,-93.189843,1.585)); +#183239 = VECTOR('',#183240,1.); +#183240 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#183241 = ORIENTED_EDGE('',*,*,#183242,.T.); +#183242 = EDGE_CURVE('',#183235,#183243,#183245,.T.); +#183243 = VERTEX_POINT('',#183244); +#183244 = CARTESIAN_POINT('',(170.237885,-93.240999,1.585)); +#183245 = CIRCLE('',#183246,0.409311833232); +#183246 = AXIS2_PLACEMENT_3D('',#183247,#183248,#183249); +#183247 = CARTESIAN_POINT('',(170.44285718563,-92.88670734057,1.585)); +#183248 = DIRECTION('',(-0.,0.,-1.)); +#183249 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#183250 = ORIENTED_EDGE('',*,*,#183251,.T.); +#183251 = EDGE_CURVE('',#183243,#183252,#183254,.T.); +#183252 = VERTEX_POINT('',#183253); +#183253 = CARTESIAN_POINT('',(170.133962,-93.138322,1.585)); +#183254 = LINE('',#183255,#183256); +#183255 = CARTESIAN_POINT('',(170.237885,-93.240999,1.585)); +#183256 = VECTOR('',#183257,1.); +#183257 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#183258 = ORIENTED_EDGE('',*,*,#183259,.T.); +#183259 = EDGE_CURVE('',#183252,#183260,#183262,.T.); +#183260 = VERTEX_POINT('',#183261); +#183261 = CARTESIAN_POINT('',(170.036941,-92.699546,1.585)); +#183262 = CIRCLE('',#183263,0.675436077441); +#183263 = AXIS2_PLACEMENT_3D('',#183264,#183265,#183266); +#183264 = CARTESIAN_POINT('',(170.70739758405,-92.78141091072,1.585)); +#183265 = DIRECTION('',(0.,0.,-1.)); +#183266 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#183267 = ORIENTED_EDGE('',*,*,#183268,.T.); +#183268 = EDGE_CURVE('',#183260,#183269,#183271,.T.); +#183269 = VERTEX_POINT('',#183270); +#183270 = CARTESIAN_POINT('',(170.084719,-92.514813,1.585)); +#183271 = LINE('',#183272,#183273); +#183272 = CARTESIAN_POINT('',(170.036941,-92.699546,1.585)); +#183273 = VECTOR('',#183274,1.); +#183274 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#183275 = ORIENTED_EDGE('',*,*,#183276,.T.); +#183276 = EDGE_CURVE('',#183269,#183277,#183279,.T.); +#183277 = VERTEX_POINT('',#183278); +#183278 = CARTESIAN_POINT('',(170.139752,-92.412206,1.585)); +#183279 = LINE('',#183280,#183281); +#183280 = CARTESIAN_POINT('',(170.084719,-92.514813,1.585)); +#183281 = VECTOR('',#183282,1.); +#183282 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#183283 = ORIENTED_EDGE('',*,*,#183284,.T.); +#183284 = EDGE_CURVE('',#183277,#183043,#183285,.T.); +#183285 = LINE('',#183286,#183287); +#183286 = CARTESIAN_POINT('',(170.139752,-92.412206,1.585)); +#183287 = VECTOR('',#183288,1.); +#183288 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#183289 = PLANE('',#183290); +#183290 = AXIS2_PLACEMENT_3D('',#183291,#183292,#183293); +#183291 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183292 = DIRECTION('',(0.,0.,1.)); +#183293 = DIRECTION('',(1.,0.,-0.)); +#183294 = SHELL_BASED_SURFACE_MODEL('',(#183295)); +#183295 = OPEN_SHELL('',(#183296)); +#183296 = ADVANCED_FACE('',(#183297),#183357,.T.); +#183297 = FACE_BOUND('',#183298,.F.); +#183298 = EDGE_LOOP('',(#183299,#183310,#183318,#183326,#183334,#183342, + #183351)); +#183299 = ORIENTED_EDGE('',*,*,#183300,.T.); +#183300 = EDGE_CURVE('',#183301,#183303,#183305,.T.); +#183301 = VERTEX_POINT('',#183302); +#183302 = CARTESIAN_POINT('',(118.71165,-92.5831,1.585)); +#183303 = VERTEX_POINT('',#183304); +#183304 = CARTESIAN_POINT('',(118.80694,-92.534576,1.585)); +#183305 = CIRCLE('',#183306,5.999960095073E-02); +#183306 = AXIS2_PLACEMENT_3D('',#183307,#183308,#183309); +#183307 = CARTESIAN_POINT('',(118.77164960094,-92.58309960094,1.585)); +#183308 = DIRECTION('',(0.,0.,-1.)); +#183309 = DIRECTION('',(-0.999999999978,-6.65088742856E-06,-0.)); +#183310 = ORIENTED_EDGE('',*,*,#183311,.T.); +#183311 = EDGE_CURVE('',#183303,#183312,#183314,.T.); +#183312 = VERTEX_POINT('',#183313); +#183313 = CARTESIAN_POINT('',(119.13694,-92.774576,1.585)); +#183314 = LINE('',#183315,#183316); +#183315 = CARTESIAN_POINT('',(118.80694,-92.534576,1.585)); +#183316 = VECTOR('',#183317,1.); +#183317 = DIRECTION('',(0.808736084303,-0.588171697675,0.)); +#183318 = ORIENTED_EDGE('',*,*,#183319,.T.); +#183319 = EDGE_CURVE('',#183312,#183320,#183322,.T.); +#183320 = VERTEX_POINT('',#183321); +#183321 = CARTESIAN_POINT('',(119.160916,-92.813742,1.585)); +#183322 = LINE('',#183323,#183324); +#183323 = CARTESIAN_POINT('',(119.13694,-92.774576,1.585)); +#183324 = VECTOR('',#183325,1.); +#183325 = DIRECTION('',(0.522103432673,-0.852882175679,0.)); +#183326 = ORIENTED_EDGE('',*,*,#183327,.T.); +#183327 = EDGE_CURVE('',#183320,#183328,#183330,.T.); +#183328 = VERTEX_POINT('',#183329); +#183329 = CARTESIAN_POINT('',(119.150174,-92.85839,1.585)); +#183330 = LINE('',#183331,#183332); +#183331 = CARTESIAN_POINT('',(119.160916,-92.813742,1.585)); +#183332 = VECTOR('',#183333,1.); +#183333 = DIRECTION('',(-0.233918140202,-0.972256295266,0.)); +#183334 = ORIENTED_EDGE('',*,*,#183335,.T.); +#183335 = EDGE_CURVE('',#183328,#183336,#183338,.T.); +#183336 = VERTEX_POINT('',#183337); +#183337 = CARTESIAN_POINT('',(118.80694,-93.111624,1.585)); +#183338 = LINE('',#183339,#183340); +#183339 = CARTESIAN_POINT('',(119.150174,-92.85839,1.585)); +#183340 = VECTOR('',#183341,1.); +#183341 = DIRECTION('',(-0.804692108267,-0.593692353743,0.)); +#183342 = ORIENTED_EDGE('',*,*,#183343,.T.); +#183343 = EDGE_CURVE('',#183336,#183344,#183346,.T.); +#183344 = VERTEX_POINT('',#183345); +#183345 = CARTESIAN_POINT('',(118.71165,-93.0631,1.585)); +#183346 = CIRCLE('',#183347,5.999941814203E-02); +#183347 = AXIS2_PLACEMENT_3D('',#183348,#183349,#183350); +#183348 = CARTESIAN_POINT('',(118.77164941813,-93.06310075805,1.585)); +#183349 = DIRECTION('',(-0.,0.,-1.)); +#183350 = DIRECTION('',(0.588182068353,-0.80872854189,-0.)); +#183351 = ORIENTED_EDGE('',*,*,#183352,.T.); +#183352 = EDGE_CURVE('',#183344,#183301,#183353,.T.); +#183353 = LINE('',#183354,#183355); +#183354 = CARTESIAN_POINT('',(118.71165,-93.0631,1.585)); +#183355 = VECTOR('',#183356,1.); +#183356 = DIRECTION('',(0.,1.,0.)); +#183357 = PLANE('',#183358); +#183358 = AXIS2_PLACEMENT_3D('',#183359,#183360,#183361); +#183359 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183360 = DIRECTION('',(0.,0.,1.)); +#183361 = DIRECTION('',(1.,0.,-0.)); +#183362 = SHELL_BASED_SURFACE_MODEL('',(#183363)); +#183363 = OPEN_SHELL('',(#183364)); +#183364 = ADVANCED_FACE('',(#183365),#183451,.T.); +#183365 = FACE_BOUND('',#183366,.F.); +#183366 = EDGE_LOOP('',(#183367,#183378,#183386,#183395,#183403,#183411, + #183419,#183428,#183436,#183445)); +#183367 = ORIENTED_EDGE('',*,*,#183368,.T.); +#183368 = EDGE_CURVE('',#183369,#183371,#183373,.T.); +#183369 = VERTEX_POINT('',#183370); +#183370 = CARTESIAN_POINT('',(201.355,-91.14,1.585)); +#183371 = VERTEX_POINT('',#183372); +#183372 = CARTESIAN_POINT('',(201.415,-91.08,1.585)); +#183373 = CIRCLE('',#183374,5.999932016265E-02); +#183374 = AXIS2_PLACEMENT_3D('',#183375,#183376,#183377); +#183375 = CARTESIAN_POINT('',(201.41499932015,-91.13999932015,1.585)); +#183376 = DIRECTION('',(0.,0.,-1.)); +#183377 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#183378 = ORIENTED_EDGE('',*,*,#183379,.T.); +#183379 = EDGE_CURVE('',#183371,#183380,#183382,.T.); +#183380 = VERTEX_POINT('',#183381); +#183381 = CARTESIAN_POINT('',(204.1,-91.08,1.585)); +#183382 = LINE('',#183383,#183384); +#183383 = CARTESIAN_POINT('',(201.415,-91.08,1.585)); +#183384 = VECTOR('',#183385,1.); +#183385 = DIRECTION('',(1.,0.,0.)); +#183386 = ORIENTED_EDGE('',*,*,#183387,.T.); +#183387 = EDGE_CURVE('',#183380,#183388,#183390,.T.); +#183388 = VERTEX_POINT('',#183389); +#183389 = CARTESIAN_POINT('',(204.1,-91.2,1.585)); +#183390 = CIRCLE('',#183391,6.000000000043E-02); +#183391 = AXIS2_PLACEMENT_3D('',#183392,#183393,#183394); +#183392 = CARTESIAN_POINT('',(204.10000022558,-91.14,1.585)); +#183393 = DIRECTION('',(0.,0.,-1.)); +#183394 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#183395 = ORIENTED_EDGE('',*,*,#183396,.T.); +#183396 = EDGE_CURVE('',#183388,#183397,#183399,.T.); +#183397 = VERTEX_POINT('',#183398); +#183398 = CARTESIAN_POINT('',(201.475,-91.2,1.585)); +#183399 = LINE('',#183400,#183401); +#183400 = CARTESIAN_POINT('',(204.1,-91.2,1.585)); +#183401 = VECTOR('',#183402,1.); +#183402 = DIRECTION('',(-1.,0.,0.)); +#183403 = ORIENTED_EDGE('',*,*,#183404,.T.); +#183404 = EDGE_CURVE('',#183397,#183405,#183407,.T.); +#183405 = VERTEX_POINT('',#183406); +#183406 = CARTESIAN_POINT('',(201.475,-93.,1.585)); +#183407 = LINE('',#183408,#183409); +#183408 = CARTESIAN_POINT('',(201.475,-91.2,1.585)); +#183409 = VECTOR('',#183410,1.); +#183410 = DIRECTION('',(0.,-1.,0.)); +#183411 = ORIENTED_EDGE('',*,*,#183412,.T.); +#183412 = EDGE_CURVE('',#183405,#183413,#183415,.T.); +#183413 = VERTEX_POINT('',#183414); +#183414 = CARTESIAN_POINT('',(204.1,-93.,1.585)); +#183415 = LINE('',#183416,#183417); +#183416 = CARTESIAN_POINT('',(201.475,-93.,1.585)); +#183417 = VECTOR('',#183418,1.); +#183418 = DIRECTION('',(1.,0.,0.)); +#183419 = ORIENTED_EDGE('',*,*,#183420,.T.); +#183420 = EDGE_CURVE('',#183413,#183421,#183423,.T.); +#183421 = VERTEX_POINT('',#183422); +#183422 = CARTESIAN_POINT('',(204.1,-93.12,1.585)); +#183423 = CIRCLE('',#183424,6.000000000042E-02); +#183424 = AXIS2_PLACEMENT_3D('',#183425,#183426,#183427); +#183425 = CARTESIAN_POINT('',(204.10000022558,-93.06,1.585)); +#183426 = DIRECTION('',(0.,0.,-1.)); +#183427 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#183428 = ORIENTED_EDGE('',*,*,#183429,.T.); +#183429 = EDGE_CURVE('',#183421,#183430,#183432,.T.); +#183430 = VERTEX_POINT('',#183431); +#183431 = CARTESIAN_POINT('',(201.415,-93.12,1.585)); +#183432 = LINE('',#183433,#183434); +#183433 = CARTESIAN_POINT('',(204.1,-93.12,1.585)); +#183434 = VECTOR('',#183435,1.); +#183435 = DIRECTION('',(-1.,0.,0.)); +#183436 = ORIENTED_EDGE('',*,*,#183437,.T.); +#183437 = EDGE_CURVE('',#183430,#183438,#183440,.T.); +#183438 = VERTEX_POINT('',#183439); +#183439 = CARTESIAN_POINT('',(201.355,-93.06,1.585)); +#183440 = CIRCLE('',#183441,5.999932016268E-02); +#183441 = AXIS2_PLACEMENT_3D('',#183442,#183443,#183444); +#183442 = CARTESIAN_POINT('',(201.41499932015,-93.06000067984,1.585)); +#183443 = DIRECTION('',(0.,0.,-1.)); +#183444 = DIRECTION('',(1.133081470031E-05,-0.999999999936,0.)); +#183445 = ORIENTED_EDGE('',*,*,#183446,.T.); +#183446 = EDGE_CURVE('',#183438,#183369,#183447,.T.); +#183447 = LINE('',#183448,#183449); +#183448 = CARTESIAN_POINT('',(201.355,-93.06,1.585)); +#183449 = VECTOR('',#183450,1.); +#183450 = DIRECTION('',(0.,1.,0.)); +#183451 = PLANE('',#183452); +#183452 = AXIS2_PLACEMENT_3D('',#183453,#183454,#183455); +#183453 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183454 = DIRECTION('',(0.,0.,1.)); +#183455 = DIRECTION('',(1.,0.,-0.)); +#183456 = SHELL_BASED_SURFACE_MODEL('',(#183457)); +#183457 = OPEN_SHELL('',(#183458)); +#183458 = ADVANCED_FACE('',(#183459),#183520,.T.); +#183459 = FACE_BOUND('',#183460,.F.); +#183460 = EDGE_LOOP('',(#183461,#183472,#183480,#183489,#183497,#183505, + #183514)); +#183461 = ORIENTED_EDGE('',*,*,#183462,.T.); +#183462 = EDGE_CURVE('',#183463,#183465,#183467,.T.); +#183463 = VERTEX_POINT('',#183464); +#183464 = CARTESIAN_POINT('',(119.57165,-91.7131,1.585)); +#183465 = VERTEX_POINT('',#183466); +#183466 = CARTESIAN_POINT('',(119.63165,-91.6531,1.585)); +#183467 = CIRCLE('',#183468,5.999932016258E-02); +#183468 = AXIS2_PLACEMENT_3D('',#183469,#183470,#183471); +#183469 = CARTESIAN_POINT('',(119.63164932015,-91.71309932015,1.585)); +#183470 = DIRECTION('',(0.,0.,-1.)); +#183471 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#183472 = ORIENTED_EDGE('',*,*,#183473,.T.); +#183473 = EDGE_CURVE('',#183465,#183474,#183476,.T.); +#183474 = VERTEX_POINT('',#183475); +#183475 = CARTESIAN_POINT('',(120.35665,-91.6531,1.585)); +#183476 = LINE('',#183477,#183478); +#183477 = CARTESIAN_POINT('',(119.63165,-91.6531,1.585)); +#183478 = VECTOR('',#183479,1.); +#183479 = DIRECTION('',(1.,0.,0.)); +#183480 = ORIENTED_EDGE('',*,*,#183481,.T.); +#183481 = EDGE_CURVE('',#183474,#183482,#183484,.T.); +#183482 = VERTEX_POINT('',#183483); +#183483 = CARTESIAN_POINT('',(120.35665,-91.7731,1.585)); +#183484 = CIRCLE('',#183485,6.000000000042E-02); +#183485 = AXIS2_PLACEMENT_3D('',#183486,#183487,#183488); +#183486 = CARTESIAN_POINT('',(120.35665022558,-91.7131,1.585)); +#183487 = DIRECTION('',(0.,0.,-1.)); +#183488 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#183489 = ORIENTED_EDGE('',*,*,#183490,.T.); +#183490 = EDGE_CURVE('',#183482,#183491,#183493,.T.); +#183491 = VERTEX_POINT('',#183492); +#183492 = CARTESIAN_POINT('',(119.69165,-91.7731,1.585)); +#183493 = LINE('',#183494,#183495); +#183494 = CARTESIAN_POINT('',(120.35665,-91.7731,1.585)); +#183495 = VECTOR('',#183496,1.); +#183496 = DIRECTION('',(-1.,0.,0.)); +#183497 = ORIENTED_EDGE('',*,*,#183498,.T.); +#183498 = EDGE_CURVE('',#183491,#183499,#183501,.T.); +#183499 = VERTEX_POINT('',#183500); +#183500 = CARTESIAN_POINT('',(119.69165,-92.4381,1.585)); +#183501 = LINE('',#183502,#183503); +#183502 = CARTESIAN_POINT('',(119.69165,-91.7731,1.585)); +#183503 = VECTOR('',#183504,1.); +#183504 = DIRECTION('',(0.,-1.,0.)); +#183505 = ORIENTED_EDGE('',*,*,#183506,.T.); +#183506 = EDGE_CURVE('',#183499,#183507,#183509,.T.); +#183507 = VERTEX_POINT('',#183508); +#183508 = CARTESIAN_POINT('',(119.57165,-92.4381,1.585)); +#183509 = CIRCLE('',#183510,6.000000000042E-02); +#183510 = AXIS2_PLACEMENT_3D('',#183511,#183512,#183513); +#183511 = CARTESIAN_POINT('',(119.63165,-92.43810022558,1.585)); +#183512 = DIRECTION('',(0.,0.,-1.)); +#183513 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#183514 = ORIENTED_EDGE('',*,*,#183515,.T.); +#183515 = EDGE_CURVE('',#183507,#183463,#183516,.T.); +#183516 = LINE('',#183517,#183518); +#183517 = CARTESIAN_POINT('',(119.57165,-92.4381,1.585)); +#183518 = VECTOR('',#183519,1.); +#183519 = DIRECTION('',(0.,1.,0.)); +#183520 = PLANE('',#183521); +#183521 = AXIS2_PLACEMENT_3D('',#183522,#183523,#183524); +#183522 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183523 = DIRECTION('',(0.,0.,1.)); +#183524 = DIRECTION('',(1.,0.,-0.)); +#183525 = SHELL_BASED_SURFACE_MODEL('',(#183526)); +#183526 = OPEN_SHELL('',(#183527)); +#183527 = ADVANCED_FACE('',(#183528),#183589,.T.); +#183528 = FACE_BOUND('',#183529,.F.); +#183529 = EDGE_LOOP('',(#183530,#183541,#183549,#183558,#183566,#183575, + #183583)); +#183530 = ORIENTED_EDGE('',*,*,#183531,.T.); +#183531 = EDGE_CURVE('',#183532,#183534,#183536,.T.); +#183532 = VERTEX_POINT('',#183533); +#183533 = CARTESIAN_POINT('',(123.12665,-91.7731,1.585)); +#183534 = VERTEX_POINT('',#183535); +#183535 = CARTESIAN_POINT('',(123.12665,-91.6531,1.585)); +#183536 = CIRCLE('',#183537,6.000000000043E-02); +#183537 = AXIS2_PLACEMENT_3D('',#183538,#183539,#183540); +#183538 = CARTESIAN_POINT('',(123.12664977441,-91.7131,1.585)); +#183539 = DIRECTION('',(0.,0.,-1.)); +#183540 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#183541 = ORIENTED_EDGE('',*,*,#183542,.T.); +#183542 = EDGE_CURVE('',#183534,#183543,#183545,.T.); +#183543 = VERTEX_POINT('',#183544); +#183544 = CARTESIAN_POINT('',(123.85165,-91.6531,1.585)); +#183545 = LINE('',#183546,#183547); +#183546 = CARTESIAN_POINT('',(123.12665,-91.6531,1.585)); +#183547 = VECTOR('',#183548,1.); +#183548 = DIRECTION('',(1.,0.,0.)); +#183549 = ORIENTED_EDGE('',*,*,#183550,.T.); +#183550 = EDGE_CURVE('',#183543,#183551,#183553,.T.); +#183551 = VERTEX_POINT('',#183552); +#183552 = CARTESIAN_POINT('',(123.91165,-91.7131,1.585)); +#183553 = CIRCLE('',#183554,5.99993201626E-02); +#183554 = AXIS2_PLACEMENT_3D('',#183555,#183556,#183557); +#183555 = CARTESIAN_POINT('',(123.85165067984,-91.71309932015,1.585)); +#183556 = DIRECTION('',(0.,0.,-1.)); +#183557 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#183558 = ORIENTED_EDGE('',*,*,#183559,.T.); +#183559 = EDGE_CURVE('',#183551,#183560,#183562,.T.); +#183560 = VERTEX_POINT('',#183561); +#183561 = CARTESIAN_POINT('',(123.91165,-92.4381,1.585)); +#183562 = LINE('',#183563,#183564); +#183563 = CARTESIAN_POINT('',(123.91165,-91.7131,1.585)); +#183564 = VECTOR('',#183565,1.); +#183565 = DIRECTION('',(0.,-1.,0.)); +#183566 = ORIENTED_EDGE('',*,*,#183567,.T.); +#183567 = EDGE_CURVE('',#183560,#183568,#183570,.T.); +#183568 = VERTEX_POINT('',#183569); +#183569 = CARTESIAN_POINT('',(123.79165,-92.4381,1.585)); +#183570 = CIRCLE('',#183571,6.000000000042E-02); +#183571 = AXIS2_PLACEMENT_3D('',#183572,#183573,#183574); +#183572 = CARTESIAN_POINT('',(123.85165,-92.43810022558,1.585)); +#183573 = DIRECTION('',(0.,0.,-1.)); +#183574 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#183575 = ORIENTED_EDGE('',*,*,#183576,.T.); +#183576 = EDGE_CURVE('',#183568,#183577,#183579,.T.); +#183577 = VERTEX_POINT('',#183578); +#183578 = CARTESIAN_POINT('',(123.79165,-91.7731,1.585)); +#183579 = LINE('',#183580,#183581); +#183580 = CARTESIAN_POINT('',(123.79165,-92.4381,1.585)); +#183581 = VECTOR('',#183582,1.); +#183582 = DIRECTION('',(0.,1.,0.)); +#183583 = ORIENTED_EDGE('',*,*,#183584,.T.); +#183584 = EDGE_CURVE('',#183577,#183532,#183585,.T.); +#183585 = LINE('',#183586,#183587); +#183586 = CARTESIAN_POINT('',(123.79165,-91.7731,1.585)); +#183587 = VECTOR('',#183588,1.); +#183588 = DIRECTION('',(-1.,0.,0.)); +#183589 = PLANE('',#183590); +#183590 = AXIS2_PLACEMENT_3D('',#183591,#183592,#183593); +#183591 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183592 = DIRECTION('',(0.,0.,1.)); +#183593 = DIRECTION('',(1.,0.,-0.)); +#183594 = SHELL_BASED_SURFACE_MODEL('',(#183595)); +#183595 = OPEN_SHELL('',(#183596)); +#183596 = ADVANCED_FACE('',(#183597,#183682),#183741,.T.); +#183597 = FACE_BOUND('',#183598,.F.); +#183598 = EDGE_LOOP('',(#183599,#183610,#183618,#183626,#183634,#183643, + #183651,#183660,#183668,#183676)); +#183599 = ORIENTED_EDGE('',*,*,#183600,.T.); +#183600 = EDGE_CURVE('',#183601,#183603,#183605,.T.); +#183601 = VERTEX_POINT('',#183602); +#183602 = CARTESIAN_POINT('',(206.151866,-91.724267,1.585)); +#183603 = VERTEX_POINT('',#183604); +#183604 = CARTESIAN_POINT('',(206.635776,-91.795163,1.585)); +#183605 = CIRCLE('',#183606,0.34461174713); +#183606 = AXIS2_PLACEMENT_3D('',#183607,#183608,#183609); +#183607 = CARTESIAN_POINT('',(206.35862294377,-91.99996397579,1.585)); +#183608 = DIRECTION('',(0.,0.,-1.)); +#183609 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#183610 = ORIENTED_EDGE('',*,*,#183611,.T.); +#183611 = EDGE_CURVE('',#183603,#183612,#183614,.T.); +#183612 = VERTEX_POINT('',#183613); +#183613 = CARTESIAN_POINT('',(206.693837,-91.91561,1.585)); +#183614 = LINE('',#183615,#183616); +#183615 = CARTESIAN_POINT('',(206.635776,-91.795163,1.585)); +#183616 = VECTOR('',#183617,1.); +#183617 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#183618 = ORIENTED_EDGE('',*,*,#183619,.T.); +#183619 = EDGE_CURVE('',#183612,#183620,#183622,.T.); +#183620 = VERTEX_POINT('',#183621); +#183621 = CARTESIAN_POINT('',(206.695278,-92.236194,1.585)); +#183622 = LINE('',#183623,#183624); +#183623 = CARTESIAN_POINT('',(206.693837,-91.91561,1.585)); +#183624 = VECTOR('',#183625,1.); +#183625 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#183626 = ORIENTED_EDGE('',*,*,#183627,.T.); +#183627 = EDGE_CURVE('',#183620,#183628,#183630,.T.); +#183628 = VERTEX_POINT('',#183629); +#183629 = CARTESIAN_POINT('',(207.111101,-92.237635,1.585)); +#183630 = LINE('',#183631,#183632); +#183631 = CARTESIAN_POINT('',(206.695278,-92.236194,1.585)); +#183632 = VECTOR('',#183633,1.); +#183633 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#183634 = ORIENTED_EDGE('',*,*,#183635,.T.); +#183635 = EDGE_CURVE('',#183628,#183636,#183638,.T.); +#183636 = VERTEX_POINT('',#183637); +#183637 = CARTESIAN_POINT('',(207.096469,-92.386194,1.585)); +#183638 = CIRCLE('',#183639,7.500006711464E-02); +#183639 = AXIS2_PLACEMENT_3D('',#183640,#183641,#183642); +#183640 = CARTESIAN_POINT('',(207.09646906711,-92.31119393288,1.585)); +#183641 = DIRECTION('',(0.,0.,-1.)); +#183642 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#183643 = ORIENTED_EDGE('',*,*,#183644,.T.); +#183644 = EDGE_CURVE('',#183636,#183645,#183647,.T.); +#183645 = VERTEX_POINT('',#183646); +#183646 = CARTESIAN_POINT('',(206.081837,-92.384753,1.585)); +#183647 = LINE('',#183648,#183649); +#183648 = CARTESIAN_POINT('',(207.096469,-92.386194,1.585)); +#183649 = VECTOR('',#183650,1.); +#183650 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#183651 = ORIENTED_EDGE('',*,*,#183652,.T.); +#183652 = EDGE_CURVE('',#183645,#183653,#183655,.T.); +#183653 = VERTEX_POINT('',#183654); +#183654 = CARTESIAN_POINT('',(206.021469,-92.311194,1.585)); +#183655 = CIRCLE('',#183656,7.500074938985E-02); +#183656 = AXIS2_PLACEMENT_3D('',#183657,#183658,#183659); +#183657 = CARTESIAN_POINT('',(206.09646974938,-92.31119353389,1.585)); +#183658 = DIRECTION('',(0.,0.,-1.)); +#183659 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#183660 = ORIENTED_EDGE('',*,*,#183661,.T.); +#183661 = EDGE_CURVE('',#183653,#183662,#183664,.T.); +#183662 = VERTEX_POINT('',#183663); +#183663 = CARTESIAN_POINT('',(206.024132,-91.910433,1.585)); +#183664 = LINE('',#183665,#183666); +#183665 = CARTESIAN_POINT('',(206.021469,-92.311194,1.585)); +#183666 = VECTOR('',#183667,1.); +#183667 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#183668 = ORIENTED_EDGE('',*,*,#183669,.T.); +#183669 = EDGE_CURVE('',#183662,#183670,#183672,.T.); +#183670 = VERTEX_POINT('',#183671); +#183671 = CARTESIAN_POINT('',(206.086336,-91.78772,1.585)); +#183672 = LINE('',#183673,#183674); +#183673 = CARTESIAN_POINT('',(206.024132,-91.910433,1.585)); +#183674 = VECTOR('',#183675,1.); +#183675 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#183676 = ORIENTED_EDGE('',*,*,#183677,.T.); +#183677 = EDGE_CURVE('',#183670,#183601,#183678,.T.); +#183678 = LINE('',#183679,#183680); +#183679 = CARTESIAN_POINT('',(206.086336,-91.78772,1.585)); +#183680 = VECTOR('',#183681,1.); +#183681 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#183682 = FACE_BOUND('',#183683,.F.); +#183683 = EDGE_LOOP('',(#183684,#183695,#183703,#183711,#183719,#183727, + #183735)); +#183684 = ORIENTED_EDGE('',*,*,#183685,.T.); +#183685 = EDGE_CURVE('',#183686,#183688,#183690,.T.); +#183686 = VERTEX_POINT('',#183687); +#183687 = CARTESIAN_POINT('',(206.480613,-91.849024,1.585)); +#183688 = VERTEX_POINT('',#183689); +#183689 = CARTESIAN_POINT('',(206.205727,-91.879431,1.585)); +#183690 = CIRCLE('',#183691,0.198386215365); +#183691 = AXIS2_PLACEMENT_3D('',#183692,#183693,#183694); +#183692 = CARTESIAN_POINT('',(206.35880995783,-92.0056161753,1.585)); +#183693 = DIRECTION('',(0.,0.,1.)); +#183694 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#183695 = ORIENTED_EDGE('',*,*,#183696,.T.); +#183696 = EDGE_CURVE('',#183688,#183697,#183699,.T.); +#183697 = VERTEX_POINT('',#183698); +#183698 = CARTESIAN_POINT('',(206.171469,-91.947947,1.585)); +#183699 = LINE('',#183700,#183701); +#183700 = CARTESIAN_POINT('',(206.205727,-91.879431,1.585)); +#183701 = VECTOR('',#183702,1.); +#183702 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#183703 = ORIENTED_EDGE('',*,*,#183704,.T.); +#183704 = EDGE_CURVE('',#183697,#183705,#183707,.T.); +#183705 = VERTEX_POINT('',#183706); +#183706 = CARTESIAN_POINT('',(206.171469,-92.236194,1.585)); +#183707 = LINE('',#183708,#183709); +#183708 = CARTESIAN_POINT('',(206.171469,-91.947947,1.585)); +#183709 = VECTOR('',#183710,1.); +#183710 = DIRECTION('',(0.,-1.,0.)); +#183711 = ORIENTED_EDGE('',*,*,#183712,.T.); +#183712 = EDGE_CURVE('',#183705,#183713,#183715,.T.); +#183713 = VERTEX_POINT('',#183714); +#183714 = CARTESIAN_POINT('',(206.545278,-92.236194,1.585)); +#183715 = LINE('',#183716,#183717); +#183716 = CARTESIAN_POINT('',(206.171469,-92.236194,1.585)); +#183717 = VECTOR('',#183718,1.); +#183718 = DIRECTION('',(1.,0.,0.)); +#183719 = ORIENTED_EDGE('',*,*,#183720,.T.); +#183720 = EDGE_CURVE('',#183713,#183721,#183723,.T.); +#183721 = VERTEX_POINT('',#183722); +#183722 = CARTESIAN_POINT('',(206.545278,-91.947947,1.585)); +#183723 = LINE('',#183724,#183725); +#183724 = CARTESIAN_POINT('',(206.545278,-92.236194,1.585)); +#183725 = VECTOR('',#183726,1.); +#183726 = DIRECTION('',(0.,1.,0.)); +#183727 = ORIENTED_EDGE('',*,*,#183728,.T.); +#183728 = EDGE_CURVE('',#183721,#183729,#183731,.T.); +#183729 = VERTEX_POINT('',#183730); +#183730 = CARTESIAN_POINT('',(206.51102,-91.879431,1.585)); +#183731 = LINE('',#183732,#183733); +#183732 = CARTESIAN_POINT('',(206.545278,-91.947947,1.585)); +#183733 = VECTOR('',#183734,1.); +#183734 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#183735 = ORIENTED_EDGE('',*,*,#183736,.T.); +#183736 = EDGE_CURVE('',#183729,#183686,#183737,.T.); +#183737 = LINE('',#183738,#183739); +#183738 = CARTESIAN_POINT('',(206.51102,-91.879431,1.585)); +#183739 = VECTOR('',#183740,1.); +#183740 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#183741 = PLANE('',#183742); +#183742 = AXIS2_PLACEMENT_3D('',#183743,#183744,#183745); +#183743 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183744 = DIRECTION('',(0.,0.,1.)); +#183745 = DIRECTION('',(1.,0.,-0.)); +#183746 = SHELL_BASED_SURFACE_MODEL('',(#183747)); +#183747 = OPEN_SHELL('',(#183748)); +#183748 = ADVANCED_FACE('',(#183749),#183785,.T.); +#183749 = FACE_BOUND('',#183750,.F.); +#183750 = EDGE_LOOP('',(#183751,#183762,#183770,#183779)); +#183751 = ORIENTED_EDGE('',*,*,#183752,.T.); +#183752 = EDGE_CURVE('',#183753,#183755,#183757,.T.); +#183753 = VERTEX_POINT('',#183754); +#183754 = CARTESIAN_POINT('',(134.629392,-91.9056,1.585)); +#183755 = VERTEX_POINT('',#183756); +#183756 = CARTESIAN_POINT('',(134.629392,-91.7856,1.585)); +#183757 = CIRCLE('',#183758,6.000000000043E-02); +#183758 = AXIS2_PLACEMENT_3D('',#183759,#183760,#183761); +#183759 = CARTESIAN_POINT('',(134.62939177441,-91.8456,1.585)); +#183760 = DIRECTION('',(0.,0.,-1.)); +#183761 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#183762 = ORIENTED_EDGE('',*,*,#183763,.T.); +#183763 = EDGE_CURVE('',#183755,#183764,#183766,.T.); +#183764 = VERTEX_POINT('',#183765); +#183765 = CARTESIAN_POINT('',(135.103908,-91.7856,1.585)); +#183766 = LINE('',#183767,#183768); +#183767 = CARTESIAN_POINT('',(134.629392,-91.7856,1.585)); +#183768 = VECTOR('',#183769,1.); +#183769 = DIRECTION('',(1.,0.,0.)); +#183770 = ORIENTED_EDGE('',*,*,#183771,.T.); +#183771 = EDGE_CURVE('',#183764,#183772,#183774,.T.); +#183772 = VERTEX_POINT('',#183773); +#183773 = CARTESIAN_POINT('',(135.103908,-91.9056,1.585)); +#183774 = CIRCLE('',#183775,6.000000000043E-02); +#183775 = AXIS2_PLACEMENT_3D('',#183776,#183777,#183778); +#183776 = CARTESIAN_POINT('',(135.10390822558,-91.8456,1.585)); +#183777 = DIRECTION('',(0.,0.,-1.)); +#183778 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#183779 = ORIENTED_EDGE('',*,*,#183780,.T.); +#183780 = EDGE_CURVE('',#183772,#183753,#183781,.T.); +#183781 = LINE('',#183782,#183783); +#183782 = CARTESIAN_POINT('',(135.103908,-91.9056,1.585)); +#183783 = VECTOR('',#183784,1.); +#183784 = DIRECTION('',(-1.,0.,0.)); +#183785 = PLANE('',#183786); +#183786 = AXIS2_PLACEMENT_3D('',#183787,#183788,#183789); +#183787 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183788 = DIRECTION('',(0.,0.,1.)); +#183789 = DIRECTION('',(1.,0.,-0.)); +#183790 = SHELL_BASED_SURFACE_MODEL('',(#183791)); +#183791 = OPEN_SHELL('',(#183792)); +#183792 = ADVANCED_FACE('',(#183793,#183846),#183872,.T.); +#183793 = FACE_BOUND('',#183794,.F.); +#183794 = EDGE_LOOP('',(#183795,#183806,#183814,#183823,#183831,#183840) + ); +#183795 = ORIENTED_EDGE('',*,*,#183796,.T.); +#183796 = EDGE_CURVE('',#183797,#183799,#183801,.T.); +#183797 = VERTEX_POINT('',#183798); +#183798 = CARTESIAN_POINT('',(140.149224,-91.480674,1.585)); +#183799 = VERTEX_POINT('',#183800); +#183800 = CARTESIAN_POINT('',(140.234076,-91.480674,1.585)); +#183801 = CIRCLE('',#183802,5.999686798802E-02); +#183802 = AXIS2_PLACEMENT_3D('',#183803,#183804,#183805); +#183803 = CARTESIAN_POINT('',(140.19165,-91.52309638433,1.585)); +#183804 = DIRECTION('',(0.,0.,-1.)); +#183805 = DIRECTION('',(-0.707136912688,0.707076648401,0.)); +#183806 = ORIENTED_EDGE('',*,*,#183807,.T.); +#183807 = EDGE_CURVE('',#183799,#183808,#183810,.T.); +#183808 = VERTEX_POINT('',#183809); +#183809 = CARTESIAN_POINT('',(140.534076,-91.780674,1.585)); +#183810 = LINE('',#183811,#183812); +#183811 = CARTESIAN_POINT('',(140.234076,-91.480674,1.585)); +#183812 = VECTOR('',#183813,1.); +#183813 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183814 = ORIENTED_EDGE('',*,*,#183815,.T.); +#183815 = EDGE_CURVE('',#183808,#183816,#183818,.T.); +#183816 = VERTEX_POINT('',#183817); +#183817 = CARTESIAN_POINT('',(140.49165,-91.8831,1.585)); +#183818 = CIRCLE('',#183819,5.999940475497E-02); +#183819 = AXIS2_PLACEMENT_3D('',#183820,#183821,#183822); +#183820 = CARTESIAN_POINT('',(140.49165062331,-91.82310059524,1.585)); +#183821 = DIRECTION('',(0.,0.,-1.)); +#183822 = DIRECTION('',(0.707096626292,0.707116935935,0.)); +#183823 = ORIENTED_EDGE('',*,*,#183824,.T.); +#183824 = EDGE_CURVE('',#183816,#183825,#183827,.T.); +#183825 = VERTEX_POINT('',#183826); +#183826 = CARTESIAN_POINT('',(139.89165,-91.8831,1.585)); +#183827 = LINE('',#183828,#183829); +#183828 = CARTESIAN_POINT('',(140.49165,-91.8831,1.585)); +#183829 = VECTOR('',#183830,1.); +#183830 = DIRECTION('',(-1.,0.,0.)); +#183831 = ORIENTED_EDGE('',*,*,#183832,.T.); +#183832 = EDGE_CURVE('',#183825,#183833,#183835,.T.); +#183833 = VERTEX_POINT('',#183834); +#183834 = CARTESIAN_POINT('',(139.849224,-91.780674,1.585)); +#183835 = CIRCLE('',#183836,5.999940475496E-02); +#183836 = AXIS2_PLACEMENT_3D('',#183837,#183838,#183839); +#183837 = CARTESIAN_POINT('',(139.89164937668,-91.82310059524,1.585)); +#183838 = DIRECTION('',(0.,0.,-1.)); +#183839 = DIRECTION('',(1.038874045148E-05,-0.999999999946,0.)); +#183840 = ORIENTED_EDGE('',*,*,#183841,.T.); +#183841 = EDGE_CURVE('',#183833,#183797,#183842,.T.); +#183842 = LINE('',#183843,#183844); +#183843 = CARTESIAN_POINT('',(139.849224,-91.780674,1.585)); +#183844 = VECTOR('',#183845,1.); +#183845 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#183846 = FACE_BOUND('',#183847,.F.); +#183847 = EDGE_LOOP('',(#183848,#183858,#183866)); +#183848 = ORIENTED_EDGE('',*,*,#183849,.T.); +#183849 = EDGE_CURVE('',#183850,#183852,#183854,.T.); +#183850 = VERTEX_POINT('',#183851); +#183851 = CARTESIAN_POINT('',(140.036502,-91.7631,1.585)); +#183852 = VERTEX_POINT('',#183853); +#183853 = CARTESIAN_POINT('',(140.346798,-91.7631,1.585)); +#183854 = LINE('',#183855,#183856); +#183855 = CARTESIAN_POINT('',(140.036502,-91.7631,1.585)); +#183856 = VECTOR('',#183857,1.); +#183857 = DIRECTION('',(1.,0.,0.)); +#183858 = ORIENTED_EDGE('',*,*,#183859,.T.); +#183859 = EDGE_CURVE('',#183852,#183860,#183862,.T.); +#183860 = VERTEX_POINT('',#183861); +#183861 = CARTESIAN_POINT('',(140.19165,-91.607952,1.585)); +#183862 = LINE('',#183863,#183864); +#183863 = CARTESIAN_POINT('',(140.346798,-91.7631,1.585)); +#183864 = VECTOR('',#183865,1.); +#183865 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#183866 = ORIENTED_EDGE('',*,*,#183867,.T.); +#183867 = EDGE_CURVE('',#183860,#183850,#183868,.T.); +#183868 = LINE('',#183869,#183870); +#183869 = CARTESIAN_POINT('',(140.19165,-91.607952,1.585)); +#183870 = VECTOR('',#183871,1.); +#183871 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#183872 = PLANE('',#183873); +#183873 = AXIS2_PLACEMENT_3D('',#183874,#183875,#183876); +#183874 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183875 = DIRECTION('',(0.,0.,1.)); +#183876 = DIRECTION('',(1.,0.,-0.)); +#183877 = SHELL_BASED_SURFACE_MODEL('',(#183878)); +#183878 = OPEN_SHELL('',(#183879)); +#183879 = ADVANCED_FACE('',(#183880),#184175,.T.); +#183880 = FACE_BOUND('',#183881,.F.); +#183881 = EDGE_LOOP('',(#183882,#183893,#183901,#183909,#183917,#183925, + #183933,#183941,#183949,#183957,#183965,#183973,#183981,#183989, + #183997,#184005,#184013,#184021,#184029,#184037,#184045,#184053, + #184062,#184070,#184078,#184086,#184094,#184103,#184111,#184119, + #184127,#184136,#184144,#184152,#184160,#184169)); +#183882 = ORIENTED_EDGE('',*,*,#183883,.T.); +#183883 = EDGE_CURVE('',#183884,#183886,#183888,.T.); +#183884 = VERTEX_POINT('',#183885); +#183885 = CARTESIAN_POINT('',(185.8768,-90.737354,1.585)); +#183886 = VERTEX_POINT('',#183887); +#183887 = CARTESIAN_POINT('',(185.963226,-90.650928,1.585)); +#183888 = CIRCLE('',#183889,0.109995194153); +#183889 = AXIS2_PLACEMENT_3D('',#183890,#183891,#183892); +#183890 = CARTESIAN_POINT('',(185.98468221987,-90.75881021987,1.585)); +#183891 = DIRECTION('',(0.,0.,-1.)); +#183892 = DIRECTION('',(-0.980790303675,0.195065066626,0.)); +#183893 = ORIENTED_EDGE('',*,*,#183894,.T.); +#183894 = EDGE_CURVE('',#183886,#183895,#183897,.T.); +#183895 = VERTEX_POINT('',#183896); +#183896 = CARTESIAN_POINT('',(186.539469,-90.650927,1.585)); +#183897 = LINE('',#183898,#183899); +#183898 = CARTESIAN_POINT('',(185.963226,-90.650928,1.585)); +#183899 = VECTOR('',#183900,1.); +#183900 = DIRECTION('',(0.999999999998,1.735378993712E-06,0.)); +#183901 = ORIENTED_EDGE('',*,*,#183902,.T.); +#183902 = EDGE_CURVE('',#183895,#183903,#183905,.T.); +#183903 = VERTEX_POINT('',#183904); +#183904 = CARTESIAN_POINT('',(186.579142,-90.667362,1.585)); +#183905 = LINE('',#183906,#183907); +#183906 = CARTESIAN_POINT('',(186.539469,-90.650927,1.585)); +#183907 = VECTOR('',#183908,1.); +#183908 = DIRECTION('',(0.923863844716,-0.382721303857,0.)); +#183909 = ORIENTED_EDGE('',*,*,#183910,.T.); +#183910 = EDGE_CURVE('',#183903,#183911,#183913,.T.); +#183911 = VERTEX_POINT('',#183912); +#183912 = CARTESIAN_POINT('',(186.685671,-90.773892,1.585)); +#183913 = LINE('',#183914,#183915); +#183914 = CARTESIAN_POINT('',(186.579142,-90.667362,1.585)); +#183915 = VECTOR('',#183916,1.); +#183916 = DIRECTION('',(0.707103462348,-0.70711010001,0.)); +#183917 = ORIENTED_EDGE('',*,*,#183918,.T.); +#183918 = EDGE_CURVE('',#183911,#183919,#183921,.T.); +#183919 = VERTEX_POINT('',#183920); +#183920 = CARTESIAN_POINT('',(186.698565,-90.80022,1.585)); +#183921 = LINE('',#183922,#183923); +#183922 = CARTESIAN_POINT('',(186.685671,-90.773892,1.585)); +#183923 = VECTOR('',#183924,1.); +#183924 = DIRECTION('',(0.439830392417,-0.898080857109,0.)); +#183925 = ORIENTED_EDGE('',*,*,#183926,.T.); +#183926 = EDGE_CURVE('',#183919,#183927,#183929,.T.); +#183927 = VERTEX_POINT('',#183928); +#183928 = CARTESIAN_POINT('',(186.77933,-91.052715,1.585)); +#183929 = LINE('',#183930,#183931); +#183930 = CARTESIAN_POINT('',(186.698565,-90.80022,1.585)); +#183931 = VECTOR('',#183932,1.); +#183932 = DIRECTION('',(0.304661436668,-0.952460712579,0.)); +#183933 = ORIENTED_EDGE('',*,*,#183934,.T.); +#183934 = EDGE_CURVE('',#183927,#183935,#183937,.T.); +#183935 = VERTEX_POINT('',#183936); +#183936 = CARTESIAN_POINT('',(186.777174,-91.2401,1.585)); +#183937 = LINE('',#183938,#183939); +#183938 = CARTESIAN_POINT('',(186.77933,-91.052715,1.585)); +#183939 = VECTOR('',#183940,1.); +#183940 = DIRECTION('',(-1.150496201248E-02,-0.999933815734,0.)); +#183941 = ORIENTED_EDGE('',*,*,#183942,.T.); +#183942 = EDGE_CURVE('',#183935,#183943,#183945,.T.); +#183943 = VERTEX_POINT('',#183944); +#183944 = CARTESIAN_POINT('',(186.689774,-91.499004,1.585)); +#183945 = LINE('',#183946,#183947); +#183946 = CARTESIAN_POINT('',(186.777174,-91.2401,1.585)); +#183947 = VECTOR('',#183948,1.); +#183948 = DIRECTION('',(-0.319844021338,-0.947470211676,0.)); +#183949 = ORIENTED_EDGE('',*,*,#183950,.T.); +#183950 = EDGE_CURVE('',#183943,#183951,#183953,.T.); +#183951 = VERTEX_POINT('',#183952); +#183952 = CARTESIAN_POINT('',(186.671992,-91.522311,1.585)); +#183953 = LINE('',#183954,#183955); +#183954 = CARTESIAN_POINT('',(186.689774,-91.499004,1.585)); +#183955 = VECTOR('',#183956,1.); +#183956 = DIRECTION('',(-0.606567233014,-0.79503219547,0.)); +#183957 = ORIENTED_EDGE('',*,*,#183958,.T.); +#183958 = EDGE_CURVE('',#183951,#183959,#183961,.T.); +#183959 = VERTEX_POINT('',#183960); +#183960 = CARTESIAN_POINT('',(186.500259,-91.689481,1.585)); +#183961 = LINE('',#183962,#183963); +#183962 = CARTESIAN_POINT('',(186.671992,-91.522311,1.585)); +#183963 = VECTOR('',#183964,1.); +#183964 = DIRECTION('',(-0.71656234147,-0.697523053947,0.)); +#183965 = ORIENTED_EDGE('',*,*,#183966,.T.); +#183966 = EDGE_CURVE('',#183959,#183967,#183969,.T.); +#183967 = VERTEX_POINT('',#183968); +#183968 = CARTESIAN_POINT('',(186.316127,-91.779816,1.585)); +#183969 = LINE('',#183970,#183971); +#183970 = CARTESIAN_POINT('',(186.500259,-91.689481,1.585)); +#183971 = VECTOR('',#183972,1.); +#183972 = DIRECTION('',(-0.897777660506,-0.440448944028,0.)); +#183973 = ORIENTED_EDGE('',*,*,#183974,.T.); +#183974 = EDGE_CURVE('',#183967,#183975,#183977,.T.); +#183975 = VERTEX_POINT('',#183976); +#183976 = CARTESIAN_POINT('',(185.988428,-91.858922,1.585)); +#183977 = LINE('',#183978,#183979); +#183978 = CARTESIAN_POINT('',(186.316127,-91.779816,1.585)); +#183979 = VECTOR('',#183980,1.); +#183980 = DIRECTION('',(-0.972077985498,-0.23465802801,0.)); +#183981 = ORIENTED_EDGE('',*,*,#183982,.T.); +#183982 = EDGE_CURVE('',#183975,#183983,#183985,.T.); +#183983 = VERTEX_POINT('',#183984); +#183984 = CARTESIAN_POINT('',(185.729435,-91.856007,1.585)); +#183985 = LINE('',#183986,#183987); +#183986 = CARTESIAN_POINT('',(185.988428,-91.858922,1.585)); +#183987 = VECTOR('',#183988,1.); +#183988 = DIRECTION('',(-0.999936667036,1.125441762678E-02,0.)); +#183989 = ORIENTED_EDGE('',*,*,#183990,.T.); +#183990 = EDGE_CURVE('',#183983,#183991,#183993,.T.); +#183991 = VERTEX_POINT('',#183992); +#183992 = CARTESIAN_POINT('',(185.402159,-91.771487,1.585)); +#183993 = LINE('',#183994,#183995); +#183994 = CARTESIAN_POINT('',(185.729435,-91.856007,1.585)); +#183995 = VECTOR('',#183996,1.); +#183996 = DIRECTION('',(-0.968233159705,0.250049092076,0.)); +#183997 = ORIENTED_EDGE('',*,*,#183998,.T.); +#183998 = EDGE_CURVE('',#183991,#183999,#184001,.T.); +#183999 = VERTEX_POINT('',#184000); +#184000 = CARTESIAN_POINT('',(185.229627,-91.681617,1.585)); +#184001 = LINE('',#184002,#184003); +#184002 = CARTESIAN_POINT('',(185.402159,-91.771487,1.585)); +#184003 = VECTOR('',#184004,1.); +#184004 = DIRECTION('',(-0.886893900564,0.461973169288,0.)); +#184005 = ORIENTED_EDGE('',*,*,#184006,.T.); +#184006 = EDGE_CURVE('',#183999,#184007,#184009,.T.); +#184007 = VERTEX_POINT('',#184008); +#184008 = CARTESIAN_POINT('',(185.055129,-91.505641,1.585)); +#184009 = LINE('',#184010,#184011); +#184010 = CARTESIAN_POINT('',(185.229627,-91.681617,1.585)); +#184011 = VECTOR('',#184012,1.); +#184012 = DIRECTION('',(-0.704118547601,0.710082439527,0.)); +#184013 = ORIENTED_EDGE('',*,*,#184014,.T.); +#184014 = EDGE_CURVE('',#184007,#184015,#184017,.T.); +#184015 = VERTEX_POINT('',#184016); +#184016 = CARTESIAN_POINT('',(185.042235,-91.479314,1.585)); +#184017 = LINE('',#184018,#184019); +#184018 = CARTESIAN_POINT('',(185.055129,-91.505641,1.585)); +#184019 = VECTOR('',#184020,1.); +#184020 = DIRECTION('',(-0.439843866833,0.898074257959,0.)); +#184021 = ORIENTED_EDGE('',*,*,#184022,.T.); +#184022 = EDGE_CURVE('',#184015,#184023,#184025,.T.); +#184023 = VERTEX_POINT('',#184024); +#184024 = CARTESIAN_POINT('',(184.961469,-91.226817,1.585)); +#184025 = LINE('',#184026,#184027); +#184026 = CARTESIAN_POINT('',(185.042235,-91.479314,1.585)); +#184027 = VECTOR('',#184028,1.); +#184028 = DIRECTION('',(-0.304662669507,0.952460318233,0.)); +#184029 = ORIENTED_EDGE('',*,*,#184030,.T.); +#184030 = EDGE_CURVE('',#184023,#184031,#184033,.T.); +#184031 = VERTEX_POINT('',#184032); +#184032 = CARTESIAN_POINT('',(184.962514,-90.965926,1.585)); +#184033 = LINE('',#184034,#184035); +#184034 = CARTESIAN_POINT('',(184.961469,-91.226817,1.585)); +#184035 = VECTOR('',#184036,1.); +#184036 = DIRECTION('',(4.005472082526E-03,0.999991978065,0.)); +#184037 = ORIENTED_EDGE('',*,*,#184038,.T.); +#184038 = EDGE_CURVE('',#184031,#184039,#184041,.T.); +#184039 = VERTEX_POINT('',#184040); +#184040 = CARTESIAN_POINT('',(184.972013,-90.938193,1.585)); +#184041 = LINE('',#184042,#184043); +#184042 = CARTESIAN_POINT('',(184.962514,-90.965926,1.585)); +#184043 = VECTOR('',#184044,1.); +#184044 = DIRECTION('',(0.324035635352,0.946044875797,0.)); +#184045 = ORIENTED_EDGE('',*,*,#184046,.T.); +#184046 = EDGE_CURVE('',#184039,#184047,#184049,.T.); +#184047 = VERTEX_POINT('',#184048); +#184048 = CARTESIAN_POINT('',(185.059691,-90.767563,1.585)); +#184049 = LINE('',#184050,#184051); +#184050 = CARTESIAN_POINT('',(184.972013,-90.938193,1.585)); +#184051 = VECTOR('',#184052,1.); +#184052 = DIRECTION('',(0.457040572984,0.889445846944,0.)); +#184053 = ORIENTED_EDGE('',*,*,#184054,.T.); +#184054 = EDGE_CURVE('',#184047,#184055,#184057,.T.); +#184055 = VERTEX_POINT('',#184056); +#184056 = CARTESIAN_POINT('',(185.252683,-90.864058,1.585)); +#184057 = CIRCLE('',#184058,0.109999029427); +#184058 = AXIS2_PLACEMENT_3D('',#184059,#184060,#184061); +#184059 = CARTESIAN_POINT('',(185.14659033842,-90.83500402206,1.585)); +#184060 = DIRECTION('',(0.,0.,-1.)); +#184061 = DIRECTION('',(-0.790000956144,0.613105610227,0.)); +#184062 = ORIENTED_EDGE('',*,*,#184063,.T.); +#184063 = EDGE_CURVE('',#184055,#184064,#184066,.T.); +#184064 = VERTEX_POINT('',#184065); +#184065 = CARTESIAN_POINT('',(185.1804,-91.013352,1.585)); +#184066 = LINE('',#184067,#184068); +#184067 = CARTESIAN_POINT('',(185.252683,-90.864058,1.585)); +#184068 = VECTOR('',#184069,1.); +#184069 = DIRECTION('',(-0.435775698604,-0.900055298582,0.)); +#184070 = ORIENTED_EDGE('',*,*,#184071,.T.); +#184071 = EDGE_CURVE('',#184064,#184072,#184074,.T.); +#184072 = VERTEX_POINT('',#184073); +#184073 = CARTESIAN_POINT('',(185.1804,-91.198107,1.585)); +#184074 = LINE('',#184075,#184076); +#184075 = CARTESIAN_POINT('',(185.1804,-91.013352,1.585)); +#184076 = VECTOR('',#184077,1.); +#184077 = DIRECTION('',(0.,-1.,0.)); +#184078 = ORIENTED_EDGE('',*,*,#184079,.T.); +#184079 = EDGE_CURVE('',#184072,#184080,#184082,.T.); +#184080 = VERTEX_POINT('',#184081); +#184081 = CARTESIAN_POINT('',(185.242733,-91.385108,1.585)); +#184082 = LINE('',#184083,#184084); +#184083 = CARTESIAN_POINT('',(185.1804,-91.198107,1.585)); +#184084 = VECTOR('',#184085,1.); +#184085 = DIRECTION('',(0.316224722125,-0.948684312676,0.)); +#184086 = ORIENTED_EDGE('',*,*,#184087,.T.); +#184087 = EDGE_CURVE('',#184080,#184088,#184090,.T.); +#184088 = VERTEX_POINT('',#184089); +#184089 = CARTESIAN_POINT('',(185.364131,-91.506506,1.585)); +#184090 = LINE('',#184091,#184092); +#184091 = CARTESIAN_POINT('',(185.242733,-91.385108,1.585)); +#184092 = VECTOR('',#184093,1.); +#184093 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#184094 = ORIENTED_EDGE('',*,*,#184095,.T.); +#184095 = EDGE_CURVE('',#184088,#184096,#184098,.T.); +#184096 = VERTEX_POINT('',#184097); +#184097 = CARTESIAN_POINT('',(185.971143,-91.639291,1.585)); +#184098 = CIRCLE('',#184099,0.989754923038); +#184099 = AXIS2_PLACEMENT_3D('',#184100,#184101,#184102); +#184100 = CARTESIAN_POINT('',(185.86845581865,-90.65487739258,1.585)); +#184101 = DIRECTION('',(0.,0.,1.)); +#184102 = DIRECTION('',(-0.509545147909,-0.860443921614,0.)); +#184103 = ORIENTED_EDGE('',*,*,#184104,.T.); +#184104 = EDGE_CURVE('',#184096,#184105,#184107,.T.); +#184105 = VERTEX_POINT('',#184106); +#184106 = CARTESIAN_POINT('',(186.251057,-91.569312,1.585)); +#184107 = LINE('',#184108,#184109); +#184108 = CARTESIAN_POINT('',(185.971143,-91.639291,1.585)); +#184109 = VECTOR('',#184110,1.); +#184110 = DIRECTION('',(0.970142092396,0.242537256028,0.)); +#184111 = ORIENTED_EDGE('',*,*,#184112,.T.); +#184112 = EDGE_CURVE('',#184105,#184113,#184115,.T.); +#184113 = VERTEX_POINT('',#184114); +#184114 = CARTESIAN_POINT('',(186.376668,-91.506506,1.585)); +#184115 = LINE('',#184116,#184117); +#184116 = CARTESIAN_POINT('',(186.251057,-91.569312,1.585)); +#184117 = VECTOR('',#184118,1.); +#184118 = DIRECTION('',(0.894425766875,0.447216443738,0.)); +#184119 = ORIENTED_EDGE('',*,*,#184120,.T.); +#184120 = EDGE_CURVE('',#184113,#184121,#184123,.T.); +#184121 = VERTEX_POINT('',#184122); +#184122 = CARTESIAN_POINT('',(186.498066,-91.385108,1.585)); +#184123 = LINE('',#184124,#184125); +#184124 = CARTESIAN_POINT('',(186.376668,-91.506506,1.585)); +#184125 = VECTOR('',#184126,1.); +#184126 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184127 = ORIENTED_EDGE('',*,*,#184128,.T.); +#184128 = EDGE_CURVE('',#184121,#184129,#184131,.T.); +#184129 = VERTEX_POINT('',#184130); +#184130 = CARTESIAN_POINT('',(186.498066,-90.894425,1.585)); +#184131 = CIRCLE('',#184132,0.490171805559); +#184132 = AXIS2_PLACEMENT_3D('',#184133,#184134,#184135); +#184133 = CARTESIAN_POINT('',(186.07371243592,-91.1397665,1.585)); +#184134 = DIRECTION('',(0.,-0.,1.)); +#184135 = DIRECTION('',(0.865724138479,-0.50052144415,-0.)); +#184136 = ORIENTED_EDGE('',*,*,#184137,.T.); +#184137 = EDGE_CURVE('',#184129,#184138,#184140,.T.); +#184138 = VERTEX_POINT('',#184139); +#184139 = CARTESIAN_POINT('',(186.472455,-90.868814,1.585)); +#184140 = LINE('',#184141,#184142); +#184141 = CARTESIAN_POINT('',(186.498066,-90.894425,1.585)); +#184142 = VECTOR('',#184143,1.); +#184143 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184144 = ORIENTED_EDGE('',*,*,#184145,.T.); +#184145 = EDGE_CURVE('',#184138,#184146,#184148,.T.); +#184146 = VERTEX_POINT('',#184147); +#184147 = CARTESIAN_POINT('',(186.094686,-90.868814,1.585)); +#184148 = LINE('',#184149,#184150); +#184149 = CARTESIAN_POINT('',(186.472455,-90.868814,1.585)); +#184150 = VECTOR('',#184151,1.); +#184151 = DIRECTION('',(-1.,0.,0.)); +#184152 = ORIENTED_EDGE('',*,*,#184153,.T.); +#184153 = EDGE_CURVE('',#184146,#184154,#184156,.T.); +#184154 = VERTEX_POINT('',#184155); +#184155 = CARTESIAN_POINT('',(186.092572,-91.085036,1.585)); +#184156 = LINE('',#184157,#184158); +#184157 = CARTESIAN_POINT('',(186.094686,-90.868814,1.585)); +#184158 = VECTOR('',#184159,1.); +#184159 = DIRECTION('',(-9.776521210348E-03,-0.999952208675,0.)); +#184160 = ORIENTED_EDGE('',*,*,#184161,.T.); +#184161 = EDGE_CURVE('',#184154,#184162,#184164,.T.); +#184162 = VERTEX_POINT('',#184163); +#184163 = CARTESIAN_POINT('',(185.8768,-91.085036,1.585)); +#184164 = CIRCLE('',#184165,0.109999639072); +#184165 = AXIS2_PLACEMENT_3D('',#184166,#184167,#184168); +#184166 = CARTESIAN_POINT('',(185.984686,-91.063576,1.585)); +#184167 = DIRECTION('',(-0.,0.,-1.)); +#184168 = DIRECTION('',(0.980785036297,-0.195091549218,-0.)); +#184169 = ORIENTED_EDGE('',*,*,#184170,.T.); +#184170 = EDGE_CURVE('',#184162,#183884,#184171,.T.); +#184171 = LINE('',#184172,#184173); +#184172 = CARTESIAN_POINT('',(185.8768,-91.085036,1.585)); +#184173 = VECTOR('',#184174,1.); +#184174 = DIRECTION('',(0.,1.,0.)); +#184175 = PLANE('',#184176); +#184176 = AXIS2_PLACEMENT_3D('',#184177,#184178,#184179); +#184177 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184178 = DIRECTION('',(0.,0.,1.)); +#184179 = DIRECTION('',(1.,0.,-0.)); +#184180 = SHELL_BASED_SURFACE_MODEL('',(#184181)); +#184181 = OPEN_SHELL('',(#184182)); +#184182 = ADVANCED_FACE('',(#184183),#184377,.T.); +#184183 = FACE_BOUND('',#184184,.F.); +#184184 = EDGE_LOOP('',(#184185,#184196,#184204,#184213,#184221,#184230, + #184238,#184246,#184254,#184263,#184271,#184280,#184288,#184297, + #184305,#184313,#184321,#184330,#184338,#184346,#184355,#184363, + #184371)); +#184185 = ORIENTED_EDGE('',*,*,#184186,.T.); +#184186 = EDGE_CURVE('',#184187,#184189,#184191,.T.); +#184187 = VERTEX_POINT('',#184188); +#184188 = CARTESIAN_POINT('',(206.054801,-90.725025,1.585)); +#184189 = VERTEX_POINT('',#184190); +#184190 = CARTESIAN_POINT('',(206.145857,-90.730942,1.585)); +#184191 = CIRCLE('',#184192,7.499904172406E-02); +#184192 = AXIS2_PLACEMENT_3D('',#184193,#184194,#184195); +#184193 = CARTESIAN_POINT('',(206.09646904495,-90.78738388299,1.585)); +#184194 = DIRECTION('',(0.,0.,-1.)); +#184195 = DIRECTION('',(-0.555581031454,0.831462396918,0.)); +#184196 = ORIENTED_EDGE('',*,*,#184197,.T.); +#184197 = EDGE_CURVE('',#184189,#184198,#184200,.T.); +#184198 = VERTEX_POINT('',#184199); +#184199 = CARTESIAN_POINT('',(206.405166,-90.957837,1.585)); +#184200 = LINE('',#184201,#184202); +#184201 = CARTESIAN_POINT('',(206.145857,-90.730942,1.585)); +#184202 = VECTOR('',#184203,1.); +#184203 = DIRECTION('',(0.752577234061,-0.658503991463,0.)); +#184204 = ORIENTED_EDGE('',*,*,#184205,.T.); +#184205 = EDGE_CURVE('',#184198,#184206,#184208,.T.); +#184206 = VERTEX_POINT('',#184207); +#184207 = CARTESIAN_POINT('',(206.653265,-90.713826,1.585)); +#184208 = CIRCLE('',#184209,0.348517853143); +#184209 = AXIS2_PLACEMENT_3D('',#184210,#184211,#184212); +#184210 = CARTESIAN_POINT('',(206.74096548686,-91.05112900704,1.585)); +#184211 = DIRECTION('',(0.,0.,-1.)); +#184212 = DIRECTION('',(-0.963507274705,0.267682146568,0.)); +#184213 = ORIENTED_EDGE('',*,*,#184214,.T.); +#184214 = EDGE_CURVE('',#184206,#184215,#184217,.T.); +#184215 = VERTEX_POINT('',#184216); +#184216 = CARTESIAN_POINT('',(206.920624,-90.713826,1.585)); +#184217 = LINE('',#184218,#184219); +#184218 = CARTESIAN_POINT('',(206.653265,-90.713826,1.585)); +#184219 = VECTOR('',#184220,1.); +#184220 = DIRECTION('',(1.,0.,0.)); +#184221 = ORIENTED_EDGE('',*,*,#184222,.T.); +#184222 = EDGE_CURVE('',#184215,#184223,#184225,.T.); +#184223 = VERTEX_POINT('',#184224); +#184224 = CARTESIAN_POINT('',(207.170028,-90.963229,1.585)); +#184225 = CIRCLE('',#184226,0.347873191155); +#184226 = AXIS2_PLACEMENT_3D('',#184227,#184228,#184229); +#184227 = CARTESIAN_POINT('',(206.83329493659,-91.05055941356,1.585)); +#184228 = DIRECTION('',(0.,0.,-1.)); +#184229 = DIRECTION('',(0.251037060709,0.967977476055,0.)); +#184230 = ORIENTED_EDGE('',*,*,#184231,.T.); +#184231 = EDGE_CURVE('',#184223,#184232,#184234,.T.); +#184232 = VERTEX_POINT('',#184233); +#184233 = CARTESIAN_POINT('',(207.168806,-91.283385,1.585)); +#184234 = LINE('',#184235,#184236); +#184235 = CARTESIAN_POINT('',(207.170028,-90.963229,1.585)); +#184236 = VECTOR('',#184237,1.); +#184237 = DIRECTION('',(-3.816861463376E-03,-0.999992715758,0.)); +#184238 = ORIENTED_EDGE('',*,*,#184239,.T.); +#184239 = EDGE_CURVE('',#184232,#184240,#184242,.T.); +#184240 = VERTEX_POINT('',#184241); +#184241 = CARTESIAN_POINT('',(207.1066,-91.406097,1.585)); +#184242 = LINE('',#184243,#184244); +#184243 = CARTESIAN_POINT('',(207.168806,-91.283385,1.585)); +#184244 = VECTOR('',#184245,1.); +#184245 = DIRECTION('',(-0.452149402815,-0.891942216477,0.)); +#184246 = ORIENTED_EDGE('',*,*,#184247,.T.); +#184247 = EDGE_CURVE('',#184240,#184248,#184250,.T.); +#184248 = VERTEX_POINT('',#184249); +#184249 = CARTESIAN_POINT('',(207.042897,-91.468793,1.585)); +#184250 = LINE('',#184251,#184252); +#184251 = CARTESIAN_POINT('',(207.1066,-91.406097,1.585)); +#184252 = VECTOR('',#184253,1.); +#184253 = DIRECTION('',(-0.712717566469,-0.701451117646,0.)); +#184254 = ORIENTED_EDGE('',*,*,#184255,.T.); +#184255 = EDGE_CURVE('',#184248,#184256,#184258,.T.); +#184256 = VERTEX_POINT('',#184257); +#184257 = CARTESIAN_POINT('',(206.948198,-91.353398,1.585)); +#184258 = CIRCLE('',#184259,7.500012668042E-02); +#184259 = AXIS2_PLACEMENT_3D('',#184260,#184261,#184262); +#184260 = CARTESIAN_POINT('',(207.00123024831,-91.406431948,1.585)); +#184261 = DIRECTION('',(0.,0.,-1.)); +#184262 = DIRECTION('',(0.555555750804,-0.831479288827,0.)); +#184263 = ORIENTED_EDGE('',*,*,#184264,.T.); +#184264 = EDGE_CURVE('',#184256,#184265,#184267,.T.); +#184265 = VERTEX_POINT('',#184266); +#184266 = CARTESIAN_POINT('',(206.987211,-91.314385,1.585)); +#184267 = LINE('',#184268,#184269); +#184268 = CARTESIAN_POINT('',(206.948198,-91.353398,1.585)); +#184269 = VECTOR('',#184270,1.); +#184270 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#184271 = ORIENTED_EDGE('',*,*,#184272,.T.); +#184272 = EDGE_CURVE('',#184265,#184273,#184275,.T.); +#184273 = VERTEX_POINT('',#184274); +#184274 = CARTESIAN_POINT('',(206.987211,-90.92705,1.585)); +#184275 = CIRCLE('',#184276,0.358499305983); +#184276 = AXIS2_PLACEMENT_3D('',#184277,#184278,#184279); +#184277 = CARTESIAN_POINT('',(206.68552465322,-91.1207175,1.585)); +#184278 = DIRECTION('',(0.,-0.,1.)); +#184279 = DIRECTION('',(0.841525608965,-0.540217224324,-0.)); +#184280 = ORIENTED_EDGE('',*,*,#184281,.T.); +#184281 = EDGE_CURVE('',#184273,#184282,#184284,.T.); +#184282 = VERTEX_POINT('',#184283); +#184283 = CARTESIAN_POINT('',(206.956803,-90.896643,1.585)); +#184284 = LINE('',#184285,#184286); +#184285 = CARTESIAN_POINT('',(206.987211,-90.92705,1.585)); +#184286 = VECTOR('',#184287,1.); +#184287 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#184288 = ORIENTED_EDGE('',*,*,#184289,.T.); +#184289 = EDGE_CURVE('',#184282,#184290,#184292,.T.); +#184290 = VERTEX_POINT('',#184291); +#184291 = CARTESIAN_POINT('',(206.617086,-90.896643,1.585)); +#184292 = CIRCLE('',#184293,0.305621483548); +#184293 = AXIS2_PLACEMENT_3D('',#184294,#184295,#184296); +#184294 = CARTESIAN_POINT('',(206.7869445,-91.150715,1.585)); +#184295 = DIRECTION('',(0.,0.,1.)); +#184296 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#184297 = ORIENTED_EDGE('',*,*,#184298,.T.); +#184298 = EDGE_CURVE('',#184290,#184299,#184301,.T.); +#184299 = VERTEX_POINT('',#184300); +#184300 = CARTESIAN_POINT('',(206.586679,-90.92705,1.585)); +#184301 = LINE('',#184302,#184303); +#184302 = CARTESIAN_POINT('',(206.617086,-90.896643,1.585)); +#184303 = VECTOR('',#184304,1.); +#184304 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184305 = ORIENTED_EDGE('',*,*,#184306,.T.); +#184306 = EDGE_CURVE('',#184299,#184307,#184309,.T.); +#184307 = VERTEX_POINT('',#184308); +#184308 = CARTESIAN_POINT('',(206.552421,-90.995566,1.585)); +#184309 = LINE('',#184310,#184311); +#184310 = CARTESIAN_POINT('',(206.586679,-90.92705,1.585)); +#184311 = VECTOR('',#184312,1.); +#184312 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#184313 = ORIENTED_EDGE('',*,*,#184314,.T.); +#184314 = EDGE_CURVE('',#184307,#184315,#184317,.T.); +#184315 = VERTEX_POINT('',#184316); +#184316 = CARTESIAN_POINT('',(206.55098,-91.13535,1.585)); +#184317 = LINE('',#184318,#184319); +#184318 = CARTESIAN_POINT('',(206.552421,-90.995566,1.585)); +#184319 = VECTOR('',#184320,1.); +#184320 = DIRECTION('',(-1.030821437469E-02,-0.999946868947,0.)); +#184321 = ORIENTED_EDGE('',*,*,#184322,.T.); +#184322 = EDGE_CURVE('',#184315,#184323,#184325,.T.); +#184323 = VERTEX_POINT('',#184324); +#184324 = CARTESIAN_POINT('',(206.428033,-91.177161,1.585)); +#184325 = CIRCLE('',#184326,7.500015628755E-02); +#184326 = AXIS2_PLACEMENT_3D('',#184327,#184328,#184329); +#184327 = CARTESIAN_POINT('',(206.4774210461,-91.12071771567,1.585)); +#184328 = DIRECTION('',(-0.,0.,-1.)); +#184329 = DIRECTION('',(0.980784008184,-0.195096717785,-0.)); +#184330 = ORIENTED_EDGE('',*,*,#184331,.T.); +#184331 = EDGE_CURVE('',#184323,#184332,#184334,.T.); +#184332 = VERTEX_POINT('',#184333); +#184333 = CARTESIAN_POINT('',(206.171469,-90.952667,1.585)); +#184334 = LINE('',#184335,#184336); +#184335 = CARTESIAN_POINT('',(206.428033,-91.177161,1.585)); +#184336 = VECTOR('',#184337,1.); +#184337 = DIRECTION('',(-0.752575967874,0.658505438534,0.)); +#184338 = ORIENTED_EDGE('',*,*,#184339,.T.); +#184339 = EDGE_CURVE('',#184332,#184340,#184342,.T.); +#184340 = VERTEX_POINT('',#184341); +#184341 = CARTESIAN_POINT('',(206.170028,-91.421064,1.585)); +#184342 = LINE('',#184343,#184344); +#184343 = CARTESIAN_POINT('',(206.171469,-90.952667,1.585)); +#184344 = VECTOR('',#184345,1.); +#184345 = DIRECTION('',(-3.076435546862E-03,-0.999995267761,0.)); +#184346 = ORIENTED_EDGE('',*,*,#184347,.T.); +#184347 = EDGE_CURVE('',#184340,#184348,#184350,.T.); +#184348 = VERTEX_POINT('',#184349); +#184349 = CARTESIAN_POINT('',(206.021469,-91.406432,1.585)); +#184350 = CIRCLE('',#184351,7.500006711464E-02); +#184351 = AXIS2_PLACEMENT_3D('',#184352,#184353,#184354); +#184352 = CARTESIAN_POINT('',(206.09646906711,-91.40643206711,1.585)); +#184353 = DIRECTION('',(-0.,0.,-1.)); +#184354 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#184355 = ORIENTED_EDGE('',*,*,#184356,.T.); +#184356 = EDGE_CURVE('',#184348,#184357,#184359,.T.); +#184357 = VERTEX_POINT('',#184358); +#184358 = CARTESIAN_POINT('',(206.02291,-90.772753,1.585)); +#184359 = LINE('',#184360,#184361); +#184360 = CARTESIAN_POINT('',(206.021469,-91.406432,1.585)); +#184361 = VECTOR('',#184362,1.); +#184362 = DIRECTION('',(2.274016140951E-03,0.999997414422,0.)); +#184363 = ORIENTED_EDGE('',*,*,#184364,.T.); +#184364 = EDGE_CURVE('',#184357,#184365,#184367,.T.); +#184365 = VERTEX_POINT('',#184366); +#184366 = CARTESIAN_POINT('',(206.034109,-90.745717,1.585)); +#184367 = LINE('',#184368,#184369); +#184368 = CARTESIAN_POINT('',(206.02291,-90.772753,1.585)); +#184369 = VECTOR('',#184370,1.); +#184370 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#184371 = ORIENTED_EDGE('',*,*,#184372,.T.); +#184372 = EDGE_CURVE('',#184365,#184187,#184373,.T.); +#184373 = LINE('',#184374,#184375); +#184374 = CARTESIAN_POINT('',(206.034109,-90.745717,1.585)); +#184375 = VECTOR('',#184376,1.); +#184376 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184377 = PLANE('',#184378); +#184378 = AXIS2_PLACEMENT_3D('',#184379,#184380,#184381); +#184379 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184380 = DIRECTION('',(0.,0.,1.)); +#184381 = DIRECTION('',(1.,0.,-0.)); +#184382 = SHELL_BASED_SURFACE_MODEL('',(#184383)); +#184383 = OPEN_SHELL('',(#184384)); +#184384 = ADVANCED_FACE('',(#184385,#184519),#184597,.T.); +#184385 = FACE_BOUND('',#184386,.F.); +#184386 = EDGE_LOOP('',(#184387,#184397,#184405,#184413,#184421,#184430, + #184438,#184447,#184455,#184463,#184471,#184479,#184487,#184496, + #184504,#184513)); +#184387 = ORIENTED_EDGE('',*,*,#184388,.T.); +#184388 = EDGE_CURVE('',#184389,#184391,#184393,.T.); +#184389 = VERTEX_POINT('',#184390); +#184390 = CARTESIAN_POINT('',(139.968689,-89.267667,1.585)); +#184391 = VERTEX_POINT('',#184392); +#184392 = CARTESIAN_POINT('',(139.99165,-89.2631,1.585)); +#184393 = LINE('',#184394,#184395); +#184394 = CARTESIAN_POINT('',(139.968689,-89.267667,1.585)); +#184395 = VECTOR('',#184396,1.); +#184396 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#184397 = ORIENTED_EDGE('',*,*,#184398,.T.); +#184398 = EDGE_CURVE('',#184391,#184399,#184401,.T.); +#184399 = VERTEX_POINT('',#184400); +#184400 = CARTESIAN_POINT('',(142.79165,-89.2631,1.585)); +#184401 = LINE('',#184402,#184403); +#184402 = CARTESIAN_POINT('',(139.99165,-89.2631,1.585)); +#184403 = VECTOR('',#184404,1.); +#184404 = DIRECTION('',(1.,0.,0.)); +#184405 = ORIENTED_EDGE('',*,*,#184406,.T.); +#184406 = EDGE_CURVE('',#184399,#184407,#184409,.T.); +#184407 = VERTEX_POINT('',#184408); +#184408 = CARTESIAN_POINT('',(142.814611,-89.267667,1.585)); +#184409 = LINE('',#184410,#184411); +#184410 = CARTESIAN_POINT('',(142.79165,-89.2631,1.585)); +#184411 = VECTOR('',#184412,1.); +#184412 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#184413 = ORIENTED_EDGE('',*,*,#184414,.T.); +#184414 = EDGE_CURVE('',#184407,#184415,#184417,.T.); +#184415 = VERTEX_POINT('',#184416); +#184416 = CARTESIAN_POINT('',(142.889919,-89.277703,1.585)); +#184417 = LINE('',#184418,#184419); +#184418 = CARTESIAN_POINT('',(142.814611,-89.267667,1.585)); +#184419 = VECTOR('',#184420,1.); +#184420 = DIRECTION('',(0.991236635155,-0.132098195018,0.)); +#184421 = ORIENTED_EDGE('',*,*,#184422,.T.); +#184422 = EDGE_CURVE('',#184415,#184423,#184425,.T.); +#184423 = VERTEX_POINT('',#184424); +#184424 = CARTESIAN_POINT('',(143.50165,-90.0231,1.585)); +#184425 = CIRCLE('',#184426,0.760001389949); +#184426 = AXIS2_PLACEMENT_3D('',#184427,#184428,#184429); +#184427 = CARTESIAN_POINT('',(142.74164861005,-90.02310088314,1.585)); +#184428 = DIRECTION('',(0.,0.,-1.)); +#184429 = DIRECTION('',(0.195092261553,0.980784894603,0.)); +#184430 = ORIENTED_EDGE('',*,*,#184431,.T.); +#184431 = EDGE_CURVE('',#184423,#184432,#184434,.T.); +#184432 = VERTEX_POINT('',#184433); +#184433 = CARTESIAN_POINT('',(143.50165,-90.6231,1.585)); +#184434 = LINE('',#184435,#184436); +#184435 = CARTESIAN_POINT('',(143.50165,-90.0231,1.585)); +#184436 = VECTOR('',#184437,1.); +#184437 = DIRECTION('',(0.,-1.,0.)); +#184438 = ORIENTED_EDGE('',*,*,#184439,.T.); +#184439 = EDGE_CURVE('',#184432,#184440,#184442,.T.); +#184440 = VERTEX_POINT('',#184441); +#184441 = CARTESIAN_POINT('',(142.889919,-91.368497,1.585)); +#184442 = CIRCLE('',#184443,0.759999019977); +#184443 = AXIS2_PLACEMENT_3D('',#184444,#184445,#184446); +#184444 = CARTESIAN_POINT('',(142.74165098002,-90.62310106184,1.585)); +#184445 = DIRECTION('',(0.,0.,-1.)); +#184446 = DIRECTION('',(0.999999999999,1.397165543076E-06,0.)); +#184447 = ORIENTED_EDGE('',*,*,#184448,.T.); +#184448 = EDGE_CURVE('',#184440,#184449,#184451,.T.); +#184449 = VERTEX_POINT('',#184450); +#184450 = CARTESIAN_POINT('',(142.814611,-91.378533,1.585)); +#184451 = LINE('',#184452,#184453); +#184452 = CARTESIAN_POINT('',(142.889919,-91.368497,1.585)); +#184453 = VECTOR('',#184454,1.); +#184454 = DIRECTION('',(-0.991236635155,-0.132098195018,0.)); +#184455 = ORIENTED_EDGE('',*,*,#184456,.T.); +#184456 = EDGE_CURVE('',#184449,#184457,#184459,.T.); +#184457 = VERTEX_POINT('',#184458); +#184458 = CARTESIAN_POINT('',(142.79165,-91.3831,1.585)); +#184459 = LINE('',#184460,#184461); +#184460 = CARTESIAN_POINT('',(142.814611,-91.378533,1.585)); +#184461 = VECTOR('',#184462,1.); +#184462 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#184463 = ORIENTED_EDGE('',*,*,#184464,.T.); +#184464 = EDGE_CURVE('',#184457,#184465,#184467,.T.); +#184465 = VERTEX_POINT('',#184466); +#184466 = CARTESIAN_POINT('',(139.99165,-91.3831,1.585)); +#184467 = LINE('',#184468,#184469); +#184468 = CARTESIAN_POINT('',(142.79165,-91.3831,1.585)); +#184469 = VECTOR('',#184470,1.); +#184470 = DIRECTION('',(-1.,0.,0.)); +#184471 = ORIENTED_EDGE('',*,*,#184472,.T.); +#184472 = EDGE_CURVE('',#184465,#184473,#184475,.T.); +#184473 = VERTEX_POINT('',#184474); +#184474 = CARTESIAN_POINT('',(139.965783,-91.375627,1.585)); +#184475 = LINE('',#184476,#184477); +#184476 = CARTESIAN_POINT('',(139.99165,-91.3831,1.585)); +#184477 = VECTOR('',#184478,1.); +#184478 = DIRECTION('',(-0.960711101854,0.277550317554,0.)); +#184479 = ORIENTED_EDGE('',*,*,#184480,.T.); +#184480 = EDGE_CURVE('',#184473,#184481,#184483,.T.); +#184481 = VERTEX_POINT('',#184482); +#184482 = CARTESIAN_POINT('',(139.893381,-91.368497,1.585)); +#184483 = LINE('',#184484,#184485); +#184484 = CARTESIAN_POINT('',(139.965783,-91.375627,1.585)); +#184485 = VECTOR('',#184486,1.); +#184486 = DIRECTION('',(-0.995186033295,9.800387306128E-02,0.)); +#184487 = ORIENTED_EDGE('',*,*,#184488,.T.); +#184488 = EDGE_CURVE('',#184481,#184489,#184491,.T.); +#184489 = VERTEX_POINT('',#184490); +#184490 = CARTESIAN_POINT('',(139.28165,-90.6231,1.585)); +#184491 = CIRCLE('',#184492,0.760001389949); +#184492 = AXIS2_PLACEMENT_3D('',#184493,#184494,#184495); +#184493 = CARTESIAN_POINT('',(140.04165138994,-90.62309911686,1.585)); +#184494 = DIRECTION('',(0.,0.,-1.)); +#184495 = DIRECTION('',(-0.195092261553,-0.980784894603,-0.)); +#184496 = ORIENTED_EDGE('',*,*,#184497,.T.); +#184497 = EDGE_CURVE('',#184489,#184498,#184500,.T.); +#184498 = VERTEX_POINT('',#184499); +#184499 = CARTESIAN_POINT('',(139.28165,-90.0231,1.585)); +#184500 = LINE('',#184501,#184502); +#184501 = CARTESIAN_POINT('',(139.28165,-90.6231,1.585)); +#184502 = VECTOR('',#184503,1.); +#184503 = DIRECTION('',(0.,1.,0.)); +#184504 = ORIENTED_EDGE('',*,*,#184505,.T.); +#184505 = EDGE_CURVE('',#184498,#184506,#184508,.T.); +#184506 = VERTEX_POINT('',#184507); +#184507 = CARTESIAN_POINT('',(139.893381,-89.277703,1.585)); +#184508 = CIRCLE('',#184509,0.759999019977); +#184509 = AXIS2_PLACEMENT_3D('',#184510,#184511,#184512); +#184510 = CARTESIAN_POINT('',(140.04164901997,-90.02309893815,1.585)); +#184511 = DIRECTION('',(0.,0.,-1.)); +#184512 = DIRECTION('',(-0.999999999999,-1.397165636569E-06,-0.)); +#184513 = ORIENTED_EDGE('',*,*,#184514,.T.); +#184514 = EDGE_CURVE('',#184506,#184389,#184515,.T.); +#184515 = LINE('',#184516,#184517); +#184516 = CARTESIAN_POINT('',(139.893381,-89.277703,1.585)); +#184517 = VECTOR('',#184518,1.); +#184518 = DIRECTION('',(0.991236635155,0.132098195018,0.)); +#184519 = FACE_BOUND('',#184520,.F.); +#184520 = EDGE_LOOP('',(#184521,#184532,#184540,#184548,#184557,#184565, + #184574,#184582,#184591)); +#184521 = ORIENTED_EDGE('',*,*,#184522,.T.); +#184522 = EDGE_CURVE('',#184523,#184525,#184527,.T.); +#184523 = VERTEX_POINT('',#184524); +#184524 = CARTESIAN_POINT('',(143.38165,-89.950989,1.585)); +#184525 = VERTEX_POINT('',#184526); +#184526 = CARTESIAN_POINT('',(142.813761,-89.3831,1.585)); +#184527 = CIRCLE('',#184528,0.64404917508); +#184528 = AXIS2_PLACEMENT_3D('',#184529,#184530,#184531); +#184529 = CARTESIAN_POINT('',(142.74165046088,-90.02309953911,1.585)); +#184530 = DIRECTION('',(0.,0.,1.)); +#184531 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#184532 = ORIENTED_EDGE('',*,*,#184533,.T.); +#184533 = EDGE_CURVE('',#184525,#184534,#184536,.T.); +#184534 = VERTEX_POINT('',#184535); +#184535 = CARTESIAN_POINT('',(140.04165,-89.3831,1.585)); +#184536 = LINE('',#184537,#184538); +#184537 = CARTESIAN_POINT('',(142.813761,-89.3831,1.585)); +#184538 = VECTOR('',#184539,1.); +#184539 = DIRECTION('',(-1.,0.,0.)); +#184540 = ORIENTED_EDGE('',*,*,#184541,.T.); +#184541 = EDGE_CURVE('',#184534,#184542,#184544,.T.); +#184542 = VERTEX_POINT('',#184543); +#184543 = CARTESIAN_POINT('',(139.969539,-89.3831,1.585)); +#184544 = LINE('',#184545,#184546); +#184545 = CARTESIAN_POINT('',(140.04165,-89.3831,1.585)); +#184546 = VECTOR('',#184547,1.); +#184547 = DIRECTION('',(-1.,0.,0.)); +#184548 = ORIENTED_EDGE('',*,*,#184549,.T.); +#184549 = EDGE_CURVE('',#184542,#184550,#184552,.T.); +#184550 = VERTEX_POINT('',#184551); +#184551 = CARTESIAN_POINT('',(139.40165,-89.950989,1.585)); +#184552 = CIRCLE('',#184553,0.64404917508); +#184553 = AXIS2_PLACEMENT_3D('',#184554,#184555,#184556); +#184554 = CARTESIAN_POINT('',(140.04164953911,-90.02309953911,1.585)); +#184555 = DIRECTION('',(0.,0.,1.)); +#184556 = DIRECTION('',(-0.111964337363,0.993712225526,0.)); +#184557 = ORIENTED_EDGE('',*,*,#184558,.T.); +#184558 = EDGE_CURVE('',#184550,#184559,#184561,.T.); +#184559 = VERTEX_POINT('',#184560); +#184560 = CARTESIAN_POINT('',(139.40165,-90.695211,1.585)); +#184561 = LINE('',#184562,#184563); +#184562 = CARTESIAN_POINT('',(139.40165,-89.950989,1.585)); +#184563 = VECTOR('',#184564,1.); +#184564 = DIRECTION('',(0.,-1.,0.)); +#184565 = ORIENTED_EDGE('',*,*,#184566,.T.); +#184566 = EDGE_CURVE('',#184559,#184567,#184569,.T.); +#184567 = VERTEX_POINT('',#184568); +#184568 = CARTESIAN_POINT('',(139.969539,-91.2631,1.585)); +#184569 = CIRCLE('',#184570,0.64404917508); +#184570 = AXIS2_PLACEMENT_3D('',#184571,#184572,#184573); +#184571 = CARTESIAN_POINT('',(140.04164953911,-90.62310046088,1.585)); +#184572 = DIRECTION('',(0.,0.,1.)); +#184573 = DIRECTION('',(-0.993712225526,-0.111964337363,0.)); +#184574 = ORIENTED_EDGE('',*,*,#184575,.T.); +#184575 = EDGE_CURVE('',#184567,#184576,#184578,.T.); +#184576 = VERTEX_POINT('',#184577); +#184577 = CARTESIAN_POINT('',(142.813761,-91.2631,1.585)); +#184578 = LINE('',#184579,#184580); +#184579 = CARTESIAN_POINT('',(139.969539,-91.2631,1.585)); +#184580 = VECTOR('',#184581,1.); +#184581 = DIRECTION('',(1.,0.,0.)); +#184582 = ORIENTED_EDGE('',*,*,#184583,.T.); +#184583 = EDGE_CURVE('',#184576,#184584,#184586,.T.); +#184584 = VERTEX_POINT('',#184585); +#184585 = CARTESIAN_POINT('',(143.38165,-90.695211,1.585)); +#184586 = CIRCLE('',#184587,0.64404917508); +#184587 = AXIS2_PLACEMENT_3D('',#184588,#184589,#184590); +#184588 = CARTESIAN_POINT('',(142.74165046088,-90.62310046088,1.585)); +#184589 = DIRECTION('',(0.,0.,1.)); +#184590 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#184591 = ORIENTED_EDGE('',*,*,#184592,.T.); +#184592 = EDGE_CURVE('',#184584,#184523,#184593,.T.); +#184593 = LINE('',#184594,#184595); +#184594 = CARTESIAN_POINT('',(143.38165,-90.695211,1.585)); +#184595 = VECTOR('',#184596,1.); +#184596 = DIRECTION('',(0.,1.,0.)); +#184597 = PLANE('',#184598); +#184598 = AXIS2_PLACEMENT_3D('',#184599,#184600,#184601); +#184599 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184600 = DIRECTION('',(0.,0.,1.)); +#184601 = DIRECTION('',(1.,0.,-0.)); +#184602 = SHELL_BASED_SURFACE_MODEL('',(#184603)); +#184603 = OPEN_SHELL('',(#184604)); +#184604 = ADVANCED_FACE('',(#184605,#184799),#184869,.T.); +#184605 = FACE_BOUND('',#184606,.F.); +#184606 = EDGE_LOOP('',(#184607,#184617,#184625,#184633,#184641,#184649, + #184657,#184665,#184673,#184681,#184689,#184697,#184705,#184713, + #184721,#184729,#184737,#184745,#184753,#184761,#184769,#184777, + #184785,#184793)); +#184607 = ORIENTED_EDGE('',*,*,#184608,.T.); +#184608 = EDGE_CURVE('',#184609,#184611,#184613,.T.); +#184609 = VERTEX_POINT('',#184610); +#184610 = CARTESIAN_POINT('',(82.877073,-89.553851,1.585)); +#184611 = VERTEX_POINT('',#184612); +#184612 = CARTESIAN_POINT('',(83.168409,-89.410089,1.585)); +#184613 = LINE('',#184614,#184615); +#184614 = CARTESIAN_POINT('',(82.877073,-89.553851,1.585)); +#184615 = VECTOR('',#184616,1.); +#184616 = DIRECTION('',(0.896761620593,0.442513949871,0.)); +#184617 = ORIENTED_EDGE('',*,*,#184618,.T.); +#184618 = EDGE_CURVE('',#184611,#184619,#184621,.T.); +#184619 = VERTEX_POINT('',#184620); +#184620 = CARTESIAN_POINT('',(83.208028,-89.404763,1.585)); +#184621 = LINE('',#184622,#184623); +#184622 = CARTESIAN_POINT('',(83.168409,-89.410089,1.585)); +#184623 = VECTOR('',#184624,1.); +#184624 = DIRECTION('',(0.991084879219,0.133231986338,0.)); +#184625 = ORIENTED_EDGE('',*,*,#184626,.T.); +#184626 = EDGE_CURVE('',#184619,#184627,#184629,.T.); +#184627 = VERTEX_POINT('',#184628); +#184628 = CARTESIAN_POINT('',(83.980149,-89.407645,1.585)); +#184629 = LINE('',#184630,#184631); +#184630 = CARTESIAN_POINT('',(83.208028,-89.404763,1.585)); +#184631 = VECTOR('',#184632,1.); +#184632 = DIRECTION('',(0.999993034013,-3.732549592646E-03,0.)); +#184633 = ORIENTED_EDGE('',*,*,#184634,.T.); +#184634 = EDGE_CURVE('',#184627,#184635,#184637,.T.); +#184635 = VERTEX_POINT('',#184636); +#184636 = CARTESIAN_POINT('',(84.017967,-89.420599,1.585)); +#184637 = LINE('',#184638,#184639); +#184638 = CARTESIAN_POINT('',(83.980149,-89.407645,1.585)); +#184639 = VECTOR('',#184640,1.); +#184640 = DIRECTION('',(0.946039317712,-0.324051862119,0.)); +#184641 = ORIENTED_EDGE('',*,*,#184642,.T.); +#184642 = EDGE_CURVE('',#184635,#184643,#184645,.T.); +#184643 = VERTEX_POINT('',#184644); +#184644 = CARTESIAN_POINT('',(84.290471,-89.560073,1.585)); +#184645 = LINE('',#184646,#184647); +#184646 = CARTESIAN_POINT('',(84.017967,-89.420599,1.585)); +#184647 = VECTOR('',#184648,1.); +#184648 = DIRECTION('',(0.890177487146,-0.455613917015,0.)); +#184649 = ORIENTED_EDGE('',*,*,#184650,.T.); +#184650 = EDGE_CURVE('',#184643,#184651,#184653,.T.); +#184651 = VERTEX_POINT('',#184652); +#184652 = CARTESIAN_POINT('',(84.447035,-89.719047,1.585)); +#184653 = LINE('',#184654,#184655); +#184654 = CARTESIAN_POINT('',(84.290471,-89.560073,1.585)); +#184655 = VECTOR('',#184656,1.); +#184656 = DIRECTION('',(0.701685610985,-0.712486703972,0.)); +#184657 = ORIENTED_EDGE('',*,*,#184658,.T.); +#184658 = EDGE_CURVE('',#184651,#184659,#184661,.T.); +#184659 = VERTEX_POINT('',#184660); +#184660 = CARTESIAN_POINT('',(84.590797,-90.010382,1.585)); +#184661 = LINE('',#184662,#184663); +#184662 = CARTESIAN_POINT('',(84.447035,-89.719047,1.585)); +#184663 = VECTOR('',#184664,1.); +#184664 = DIRECTION('',(0.442515171356,-0.896761017841,0.)); +#184665 = ORIENTED_EDGE('',*,*,#184666,.T.); +#184666 = EDGE_CURVE('',#184659,#184667,#184669,.T.); +#184667 = VERTEX_POINT('',#184668); +#184668 = CARTESIAN_POINT('',(84.596123,-90.050001,1.585)); +#184669 = LINE('',#184670,#184671); +#184670 = CARTESIAN_POINT('',(84.590797,-90.010382,1.585)); +#184671 = VECTOR('',#184672,1.); +#184672 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#184673 = ORIENTED_EDGE('',*,*,#184674,.T.); +#184674 = EDGE_CURVE('',#184667,#184675,#184677,.T.); +#184675 = VERTEX_POINT('',#184676); +#184676 = CARTESIAN_POINT('',(84.593241,-90.450693,1.585)); +#184677 = LINE('',#184678,#184679); +#184678 = CARTESIAN_POINT('',(84.596123,-90.050001,1.585)); +#184679 = VECTOR('',#184680,1.); +#184680 = DIRECTION('',(-7.192370838E-03,-0.999974134566,0.)); +#184681 = ORIENTED_EDGE('',*,*,#184682,.T.); +#184682 = EDGE_CURVE('',#184675,#184683,#184685,.T.); +#184683 = VERTEX_POINT('',#184684); +#184684 = CARTESIAN_POINT('',(84.580287,-90.488511,1.585)); +#184685 = LINE('',#184686,#184687); +#184686 = CARTESIAN_POINT('',(84.593241,-90.450693,1.585)); +#184687 = VECTOR('',#184688,1.); +#184688 = DIRECTION('',(-0.32405186212,-0.946039317712,0.)); +#184689 = ORIENTED_EDGE('',*,*,#184690,.T.); +#184690 = EDGE_CURVE('',#184683,#184691,#184693,.T.); +#184691 = VERTEX_POINT('',#184692); +#184692 = CARTESIAN_POINT('',(84.440813,-90.761015,1.585)); +#184693 = LINE('',#184694,#184695); +#184694 = CARTESIAN_POINT('',(84.580287,-90.488511,1.585)); +#184695 = VECTOR('',#184696,1.); +#184696 = DIRECTION('',(-0.455613917015,-0.890177487146,0.)); +#184697 = ORIENTED_EDGE('',*,*,#184698,.T.); +#184698 = EDGE_CURVE('',#184691,#184699,#184701,.T.); +#184699 = VERTEX_POINT('',#184700); +#184700 = CARTESIAN_POINT('',(84.281839,-90.917579,1.585)); +#184701 = LINE('',#184702,#184703); +#184702 = CARTESIAN_POINT('',(84.440813,-90.761015,1.585)); +#184703 = VECTOR('',#184704,1.); +#184704 = DIRECTION('',(-0.712486703972,-0.701685610985,0.)); +#184705 = ORIENTED_EDGE('',*,*,#184706,.T.); +#184706 = EDGE_CURVE('',#184699,#184707,#184709,.T.); +#184707 = VERTEX_POINT('',#184708); +#184708 = CARTESIAN_POINT('',(83.990503,-91.061341,1.585)); +#184709 = LINE('',#184710,#184711); +#184710 = CARTESIAN_POINT('',(84.281839,-90.917579,1.585)); +#184711 = VECTOR('',#184712,1.); +#184712 = DIRECTION('',(-0.896761620593,-0.442513949871,0.)); +#184713 = ORIENTED_EDGE('',*,*,#184714,.T.); +#184714 = EDGE_CURVE('',#184707,#184715,#184717,.T.); +#184715 = VERTEX_POINT('',#184716); +#184716 = CARTESIAN_POINT('',(83.950885,-91.066667,1.585)); +#184717 = LINE('',#184718,#184719); +#184718 = CARTESIAN_POINT('',(83.990503,-91.061341,1.585)); +#184719 = VECTOR('',#184720,1.); +#184720 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#184721 = ORIENTED_EDGE('',*,*,#184722,.T.); +#184722 = EDGE_CURVE('',#184715,#184723,#184725,.T.); +#184723 = VERTEX_POINT('',#184724); +#184724 = CARTESIAN_POINT('',(83.178764,-91.063785,1.585)); +#184725 = LINE('',#184726,#184727); +#184726 = CARTESIAN_POINT('',(83.950885,-91.066667,1.585)); +#184727 = VECTOR('',#184728,1.); +#184728 = DIRECTION('',(-0.999993034013,3.732549592646E-03,0.)); +#184729 = ORIENTED_EDGE('',*,*,#184730,.T.); +#184730 = EDGE_CURVE('',#184723,#184731,#184733,.T.); +#184731 = VERTEX_POINT('',#184732); +#184732 = CARTESIAN_POINT('',(83.140946,-91.050831,1.585)); +#184733 = LINE('',#184734,#184735); +#184734 = CARTESIAN_POINT('',(83.178764,-91.063785,1.585)); +#184735 = VECTOR('',#184736,1.); +#184736 = DIRECTION('',(-0.946039317712,0.324051862119,0.)); +#184737 = ORIENTED_EDGE('',*,*,#184738,.T.); +#184738 = EDGE_CURVE('',#184731,#184739,#184741,.T.); +#184739 = VERTEX_POINT('',#184740); +#184740 = CARTESIAN_POINT('',(82.868442,-90.911357,1.585)); +#184741 = LINE('',#184742,#184743); +#184742 = CARTESIAN_POINT('',(83.140946,-91.050831,1.585)); +#184743 = VECTOR('',#184744,1.); +#184744 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#184745 = ORIENTED_EDGE('',*,*,#184746,.T.); +#184746 = EDGE_CURVE('',#184739,#184747,#184749,.T.); +#184747 = VERTEX_POINT('',#184748); +#184748 = CARTESIAN_POINT('',(82.711879,-90.752383,1.585)); +#184749 = LINE('',#184750,#184751); +#184750 = CARTESIAN_POINT('',(82.868442,-90.911357,1.585)); +#184751 = VECTOR('',#184752,1.); +#184752 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#184753 = ORIENTED_EDGE('',*,*,#184754,.T.); +#184754 = EDGE_CURVE('',#184747,#184755,#184757,.T.); +#184755 = VERTEX_POINT('',#184756); +#184756 = CARTESIAN_POINT('',(82.568116,-90.461048,1.585)); +#184757 = LINE('',#184758,#184759); +#184758 = CARTESIAN_POINT('',(82.711879,-90.752383,1.585)); +#184759 = VECTOR('',#184760,1.); +#184760 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#184761 = ORIENTED_EDGE('',*,*,#184762,.T.); +#184762 = EDGE_CURVE('',#184755,#184763,#184765,.T.); +#184763 = VERTEX_POINT('',#184764); +#184764 = CARTESIAN_POINT('',(82.56279,-90.421429,1.585)); +#184765 = LINE('',#184766,#184767); +#184766 = CARTESIAN_POINT('',(82.568116,-90.461048,1.585)); +#184767 = VECTOR('',#184768,1.); +#184768 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#184769 = ORIENTED_EDGE('',*,*,#184770,.T.); +#184770 = EDGE_CURVE('',#184763,#184771,#184773,.T.); +#184771 = VERTEX_POINT('',#184772); +#184772 = CARTESIAN_POINT('',(82.565672,-90.020737,1.585)); +#184773 = LINE('',#184774,#184775); +#184774 = CARTESIAN_POINT('',(82.56279,-90.421429,1.585)); +#184775 = VECTOR('',#184776,1.); +#184776 = DIRECTION('',(7.192370838E-03,0.999974134566,0.)); +#184777 = ORIENTED_EDGE('',*,*,#184778,.T.); +#184778 = EDGE_CURVE('',#184771,#184779,#184781,.T.); +#184779 = VERTEX_POINT('',#184780); +#184780 = CARTESIAN_POINT('',(82.578626,-89.982919,1.585)); +#184781 = LINE('',#184782,#184783); +#184782 = CARTESIAN_POINT('',(82.565672,-90.020737,1.585)); +#184783 = VECTOR('',#184784,1.); +#184784 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#184785 = ORIENTED_EDGE('',*,*,#184786,.T.); +#184786 = EDGE_CURVE('',#184779,#184787,#184789,.T.); +#184787 = VERTEX_POINT('',#184788); +#184788 = CARTESIAN_POINT('',(82.718101,-89.710414,1.585)); +#184789 = LINE('',#184790,#184791); +#184790 = CARTESIAN_POINT('',(82.578626,-89.982919,1.585)); +#184791 = VECTOR('',#184792,1.); +#184792 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#184793 = ORIENTED_EDGE('',*,*,#184794,.T.); +#184794 = EDGE_CURVE('',#184787,#184609,#184795,.T.); +#184795 = LINE('',#184796,#184797); +#184796 = CARTESIAN_POINT('',(82.718101,-89.710414,1.585)); +#184797 = VECTOR('',#184798,1.); +#184798 = DIRECTION('',(0.712484531253,0.701687817141,0.)); +#184799 = FACE_BOUND('',#184800,.F.); +#184800 = EDGE_LOOP('',(#184801,#184812,#184820,#184829,#184837,#184846, + #184854,#184863)); +#184801 = ORIENTED_EDGE('',*,*,#184802,.T.); +#184802 = EDGE_CURVE('',#184803,#184805,#184807,.T.); +#184803 = VERTEX_POINT('',#184804); +#184804 = CARTESIAN_POINT('',(84.10965,-89.80185,1.585)); +#184805 = VERTEX_POINT('',#184806); +#184806 = CARTESIAN_POINT('',(83.049263,-89.801849,1.585)); +#184807 = CIRCLE('',#184808,0.974528751426); +#184808 = AXIS2_PLACEMENT_3D('',#184809,#184810,#184811); +#184809 = CARTESIAN_POINT('',(83.579455728885,-90.61952984091,1.585)); +#184810 = DIRECTION('',(0.,0.,1.)); +#184811 = DIRECTION('',(0.544051953664,0.839051531025,-0.)); +#184812 = ORIENTED_EDGE('',*,*,#184813,.T.); +#184813 = EDGE_CURVE('',#184805,#184814,#184816,.T.); +#184814 = VERTEX_POINT('',#184815); +#184815 = CARTESIAN_POINT('',(82.959878,-89.891235,1.585)); +#184816 = LINE('',#184817,#184818); +#184817 = CARTESIAN_POINT('',(83.049263,-89.801849,1.585)); +#184818 = VECTOR('',#184819,1.); +#184819 = DIRECTION('',(-0.707102825798,-0.707110736553,0.)); +#184820 = ORIENTED_EDGE('',*,*,#184821,.T.); +#184821 = EDGE_CURVE('',#184814,#184822,#184824,.T.); +#184822 = VERTEX_POINT('',#184823); +#184823 = CARTESIAN_POINT('',(82.959878,-90.580194,1.585)); +#184824 = CIRCLE('',#184825,0.563733421966); +#184825 = AXIS2_PLACEMENT_3D('',#184826,#184827,#184828); +#184826 = CARTESIAN_POINT('',(83.406117,-90.2357145,1.585)); +#184827 = DIRECTION('',(0.,0.,1.)); +#184828 = DIRECTION('',(-0.791578044892,0.611068080368,0.)); +#184829 = ORIENTED_EDGE('',*,*,#184830,.T.); +#184830 = EDGE_CURVE('',#184822,#184831,#184833,.T.); +#184831 = VERTEX_POINT('',#184832); +#184832 = CARTESIAN_POINT('',(83.049263,-90.66958,1.585)); +#184833 = LINE('',#184834,#184835); +#184834 = CARTESIAN_POINT('',(82.959878,-90.580194,1.585)); +#184835 = VECTOR('',#184836,1.); +#184836 = DIRECTION('',(0.707102825798,-0.707110736553,0.)); +#184837 = ORIENTED_EDGE('',*,*,#184838,.T.); +#184838 = EDGE_CURVE('',#184831,#184839,#184841,.T.); +#184839 = VERTEX_POINT('',#184840); +#184840 = CARTESIAN_POINT('',(84.10965,-90.669579,1.585)); +#184841 = CIRCLE('',#184842,0.974520845789); +#184842 = AXIS2_PLACEMENT_3D('',#184843,#184844,#184845); +#184843 = CARTESIAN_POINT('',(83.579455728894,-89.85190858121,1.585)); +#184844 = DIRECTION('',(0.,0.,1.)); +#184845 = DIRECTION('',(-0.544054784652,-0.839049695368,0.)); +#184846 = ORIENTED_EDGE('',*,*,#184847,.T.); +#184847 = EDGE_CURVE('',#184839,#184848,#184850,.T.); +#184848 = VERTEX_POINT('',#184849); +#184849 = CARTESIAN_POINT('',(84.199035,-90.580194,1.585)); +#184850 = LINE('',#184851,#184852); +#184851 = CARTESIAN_POINT('',(84.10965,-90.669579,1.585)); +#184852 = VECTOR('',#184853,1.); +#184853 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184854 = ORIENTED_EDGE('',*,*,#184855,.T.); +#184855 = EDGE_CURVE('',#184848,#184856,#184858,.T.); +#184856 = VERTEX_POINT('',#184857); +#184857 = CARTESIAN_POINT('',(84.199035,-89.891235,1.585)); +#184858 = CIRCLE('',#184859,0.563732196508); +#184859 = AXIS2_PLACEMENT_3D('',#184860,#184861,#184862); +#184860 = CARTESIAN_POINT('',(83.752797548121,-90.2357145,1.585)); +#184861 = DIRECTION('',(0.,-0.,1.)); +#184862 = DIRECTION('',(0.791577019448,-0.611069408726,-0.)); +#184863 = ORIENTED_EDGE('',*,*,#184864,.T.); +#184864 = EDGE_CURVE('',#184856,#184803,#184865,.T.); +#184865 = LINE('',#184866,#184867); +#184866 = CARTESIAN_POINT('',(84.199035,-89.891235,1.585)); +#184867 = VECTOR('',#184868,1.); +#184868 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184869 = PLANE('',#184870); +#184870 = AXIS2_PLACEMENT_3D('',#184871,#184872,#184873); +#184871 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184872 = DIRECTION('',(0.,0.,1.)); +#184873 = DIRECTION('',(1.,0.,-0.)); +#184874 = SHELL_BASED_SURFACE_MODEL('',(#184875)); +#184875 = OPEN_SHELL('',(#184876)); +#184876 = ADVANCED_FACE('',(#184877),#184997,.T.); +#184877 = FACE_BOUND('',#184878,.F.); +#184878 = EDGE_LOOP('',(#184879,#184890,#184898,#184907,#184915,#184924, + #184932,#184941,#184949,#184958,#184966,#184975,#184983,#184991)); +#184879 = ORIENTED_EDGE('',*,*,#184880,.T.); +#184880 = EDGE_CURVE('',#184881,#184883,#184885,.T.); +#184881 = VERTEX_POINT('',#184882); +#184882 = CARTESIAN_POINT('',(120.938077,-89.885559,1.585)); +#184883 = VERTEX_POINT('',#184884); +#184884 = CARTESIAN_POINT('',(121.054745,-89.947919,1.585)); +#184885 = CIRCLE('',#184886,7.500000000002E-02); +#184886 = AXIS2_PLACEMENT_3D('',#184887,#184888,#184889); +#184887 = CARTESIAN_POINT('',(120.979745,-89.94791906555,1.585)); +#184888 = DIRECTION('',(0.,0.,-1.)); +#184889 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#184890 = ORIENTED_EDGE('',*,*,#184891,.T.); +#184891 = EDGE_CURVE('',#184883,#184892,#184894,.T.); +#184892 = VERTEX_POINT('',#184893); +#184893 = CARTESIAN_POINT('',(121.054745,-90.739737,1.585)); +#184894 = LINE('',#184895,#184896); +#184895 = CARTESIAN_POINT('',(121.054745,-89.947919,1.585)); +#184896 = VECTOR('',#184897,1.); +#184897 = DIRECTION('',(0.,-1.,0.)); +#184898 = ORIENTED_EDGE('',*,*,#184899,.T.); +#184899 = EDGE_CURVE('',#184892,#184900,#184902,.T.); +#184900 = VERTEX_POINT('',#184901); +#184901 = CARTESIAN_POINT('',(121.187926,-90.872919,1.585)); +#184902 = CIRCLE('',#184903,0.186867373533); +#184903 = AXIS2_PLACEMENT_3D('',#184904,#184905,#184906); +#184904 = CARTESIAN_POINT('',(121.23546471388,-90.69219964305,1.585)); +#184905 = DIRECTION('',(0.,0.,1.)); +#184906 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#184907 = ORIENTED_EDGE('',*,*,#184908,.T.); +#184908 = EDGE_CURVE('',#184900,#184909,#184911,.T.); +#184909 = VERTEX_POINT('',#184910); +#184910 = CARTESIAN_POINT('',(121.342992,-90.872919,1.585)); +#184911 = LINE('',#184912,#184913); +#184912 = CARTESIAN_POINT('',(121.187926,-90.872919,1.585)); +#184913 = VECTOR('',#184914,1.); +#184914 = DIRECTION('',(1.,0.,0.)); +#184915 = ORIENTED_EDGE('',*,*,#184916,.T.); +#184916 = EDGE_CURVE('',#184909,#184917,#184919,.T.); +#184917 = VERTEX_POINT('',#184918); +#184918 = CARTESIAN_POINT('',(121.476173,-90.739737,1.585)); +#184919 = CIRCLE('',#184920,0.186867760544); +#184920 = AXIS2_PLACEMENT_3D('',#184921,#184922,#184923); +#184921 = CARTESIAN_POINT('',(121.29545296928,-90.69219932622,1.585)); +#184922 = DIRECTION('',(0.,0.,1.)); +#184923 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#184924 = ORIENTED_EDGE('',*,*,#184925,.T.); +#184925 = EDGE_CURVE('',#184917,#184926,#184928,.T.); +#184926 = VERTEX_POINT('',#184927); +#184927 = CARTESIAN_POINT('',(121.477614,-89.933287,1.585)); +#184928 = LINE('',#184929,#184930); +#184929 = CARTESIAN_POINT('',(121.476173,-90.739737,1.585)); +#184930 = VECTOR('',#184931,1.); +#184931 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#184932 = ORIENTED_EDGE('',*,*,#184933,.T.); +#184933 = EDGE_CURVE('',#184926,#184934,#184936,.T.); +#184934 = VERTEX_POINT('',#184935); +#184935 = CARTESIAN_POINT('',(121.626173,-89.947919,1.585)); +#184936 = CIRCLE('',#184937,7.500006711463E-02); +#184937 = AXIS2_PLACEMENT_3D('',#184938,#184939,#184940); +#184938 = CARTESIAN_POINT('',(121.55117293288,-89.94791893288,1.585)); +#184939 = DIRECTION('',(0.,0.,-1.)); +#184940 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#184941 = ORIENTED_EDGE('',*,*,#184942,.T.); +#184942 = EDGE_CURVE('',#184934,#184943,#184945,.T.); +#184943 = VERTEX_POINT('',#184944); +#184944 = CARTESIAN_POINT('',(121.62351,-90.777252,1.585)); +#184945 = LINE('',#184946,#184947); +#184946 = CARTESIAN_POINT('',(121.626173,-89.947919,1.585)); +#184947 = VECTOR('',#184948,1.); +#184948 = DIRECTION('',(-3.210997598702E-03,-0.999994844734,0.)); +#184949 = ORIENTED_EDGE('',*,*,#184950,.T.); +#184950 = EDGE_CURVE('',#184943,#184951,#184953,.T.); +#184951 = VERTEX_POINT('',#184952); +#184952 = CARTESIAN_POINT('',(121.375329,-91.021478,1.585)); +#184953 = CIRCLE('',#184954,0.348635327447); +#184954 = AXIS2_PLACEMENT_3D('',#184955,#184956,#184957); +#184955 = CARTESIAN_POINT('',(121.28755748129,-90.68407208415,1.585)); +#184956 = DIRECTION('',(0.,0.,-1.)); +#184957 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#184958 = ORIENTED_EDGE('',*,*,#184959,.T.); +#184959 = EDGE_CURVE('',#184951,#184960,#184962,.T.); +#184960 = VERTEX_POINT('',#184961); +#184961 = CARTESIAN_POINT('',(121.150411,-91.020256,1.585)); +#184962 = LINE('',#184963,#184964); +#184963 = CARTESIAN_POINT('',(121.375329,-91.021478,1.585)); +#184964 = VECTOR('',#184965,1.); +#184965 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#184966 = ORIENTED_EDGE('',*,*,#184967,.T.); +#184967 = EDGE_CURVE('',#184960,#184968,#184970,.T.); +#184968 = VERTEX_POINT('',#184969); +#184969 = CARTESIAN_POINT('',(120.906186,-90.772074,1.585)); +#184970 = CIRCLE('',#184971,0.348628446662); +#184971 = AXIS2_PLACEMENT_3D('',#184972,#184973,#184974); +#184972 = CARTESIAN_POINT('',(121.24358661322,-90.68430942847,1.585)); +#184973 = DIRECTION('',(0.,0.,-1.)); +#184974 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#184975 = ORIENTED_EDGE('',*,*,#184976,.T.); +#184976 = EDGE_CURVE('',#184968,#184977,#184979,.T.); +#184977 = VERTEX_POINT('',#184978); +#184978 = CARTESIAN_POINT('',(120.906186,-89.933287,1.585)); +#184979 = LINE('',#184980,#184981); +#184980 = CARTESIAN_POINT('',(120.906186,-90.772074,1.585)); +#184981 = VECTOR('',#184982,1.); +#184982 = DIRECTION('',(0.,1.,0.)); +#184983 = ORIENTED_EDGE('',*,*,#184984,.T.); +#184984 = EDGE_CURVE('',#184977,#184985,#184987,.T.); +#184985 = VERTEX_POINT('',#184986); +#184986 = CARTESIAN_POINT('',(120.917385,-89.906251,1.585)); +#184987 = LINE('',#184988,#184989); +#184988 = CARTESIAN_POINT('',(120.906186,-89.933287,1.585)); +#184989 = VECTOR('',#184990,1.); +#184990 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#184991 = ORIENTED_EDGE('',*,*,#184992,.T.); +#184992 = EDGE_CURVE('',#184985,#184881,#184993,.T.); +#184993 = LINE('',#184994,#184995); +#184994 = CARTESIAN_POINT('',(120.917385,-89.906251,1.585)); +#184995 = VECTOR('',#184996,1.); +#184996 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#184997 = PLANE('',#184998); +#184998 = AXIS2_PLACEMENT_3D('',#184999,#185000,#185001); +#184999 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185000 = DIRECTION('',(0.,0.,1.)); +#185001 = DIRECTION('',(1.,0.,-0.)); +#185002 = SHELL_BASED_SURFACE_MODEL('',(#185003)); +#185003 = OPEN_SHELL('',(#185004)); +#185004 = ADVANCED_FACE('',(#185005,#185148),#185218,.T.); +#185005 = FACE_BOUND('',#185006,.F.); +#185006 = EDGE_LOOP('',(#185007,#185018,#185026,#185034,#185043,#185051, + #185059,#185067,#185075,#185083,#185091,#185099,#185108,#185116, + #185125,#185133,#185142)); +#185007 = ORIENTED_EDGE('',*,*,#185008,.T.); +#185008 = EDGE_CURVE('',#185009,#185011,#185013,.T.); +#185009 = VERTEX_POINT('',#185010); +#185010 = CARTESIAN_POINT('',(121.906984,-90.3583,1.585)); +#185011 = VERTEX_POINT('',#185012); +#185012 = CARTESIAN_POINT('',(122.13668,-89.928456,1.585)); +#185013 = CIRCLE('',#185014,0.610092147705); +#185014 = AXIS2_PLACEMENT_3D('',#185015,#185016,#185017); +#185015 = CARTESIAN_POINT('',(122.51513074024,-90.40698234817,1.585)); +#185016 = DIRECTION('',(0.,0.,-1.)); +#185017 = DIRECTION('',(-0.99681128913,7.979507417364E-02,0.)); +#185018 = ORIENTED_EDGE('',*,*,#185019,.T.); +#185019 = EDGE_CURVE('',#185011,#185020,#185022,.T.); +#185020 = VERTEX_POINT('',#185021); +#185021 = CARTESIAN_POINT('',(122.250827,-89.87436,1.585)); +#185022 = LINE('',#185023,#185024); +#185023 = CARTESIAN_POINT('',(122.13668,-89.928456,1.585)); +#185024 = VECTOR('',#185025,1.); +#185025 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#185026 = ORIENTED_EDGE('',*,*,#185027,.T.); +#185027 = EDGE_CURVE('',#185020,#185028,#185030,.T.); +#185028 = VERTEX_POINT('',#185029); +#185029 = CARTESIAN_POINT('',(122.470567,-89.87436,1.585)); +#185030 = LINE('',#185031,#185032); +#185031 = CARTESIAN_POINT('',(122.250827,-89.87436,1.585)); +#185032 = VECTOR('',#185033,1.); +#185033 = DIRECTION('',(1.,0.,0.)); +#185034 = ORIENTED_EDGE('',*,*,#185035,.T.); +#185035 = EDGE_CURVE('',#185028,#185036,#185038,.T.); +#185036 = VERTEX_POINT('',#185037); +#185037 = CARTESIAN_POINT('',(122.455935,-90.022919,1.585)); +#185038 = CIRCLE('',#185039,7.500006711464E-02); +#185039 = AXIS2_PLACEMENT_3D('',#185040,#185041,#185042); +#185040 = CARTESIAN_POINT('',(122.45593506711,-89.94791893288,1.585)); +#185041 = DIRECTION('',(0.,0.,-1.)); +#185042 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#185043 = ORIENTED_EDGE('',*,*,#185044,.T.); +#185044 = EDGE_CURVE('',#185036,#185045,#185047,.T.); +#185045 = VERTEX_POINT('',#185046); +#185046 = CARTESIAN_POINT('',(122.283164,-90.022919,1.585)); +#185047 = LINE('',#185048,#185049); +#185048 = CARTESIAN_POINT('',(122.455935,-90.022919,1.585)); +#185049 = VECTOR('',#185050,1.); +#185050 = DIRECTION('',(-1.,0.,0.)); +#185051 = ORIENTED_EDGE('',*,*,#185052,.T.); +#185052 = EDGE_CURVE('',#185045,#185053,#185055,.T.); +#185053 = VERTEX_POINT('',#185054); +#185054 = CARTESIAN_POINT('',(122.214648,-90.057177,1.585)); +#185055 = LINE('',#185056,#185057); +#185056 = CARTESIAN_POINT('',(122.283164,-90.022919,1.585)); +#185057 = VECTOR('',#185058,1.); +#185058 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#185059 = ORIENTED_EDGE('',*,*,#185060,.T.); +#185060 = EDGE_CURVE('',#185053,#185061,#185063,.T.); +#185061 = VERTEX_POINT('',#185062); +#185062 = CARTESIAN_POINT('',(122.180886,-90.090938,1.585)); +#185063 = LINE('',#185064,#185065); +#185064 = CARTESIAN_POINT('',(122.214648,-90.057177,1.585)); +#185065 = VECTOR('',#185066,1.); +#185066 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#185067 = ORIENTED_EDGE('',*,*,#185068,.T.); +#185068 = EDGE_CURVE('',#185061,#185069,#185071,.T.); +#185069 = VERTEX_POINT('',#185070); +#185070 = CARTESIAN_POINT('',(122.096974,-90.216807,1.585)); +#185071 = LINE('',#185072,#185073); +#185072 = CARTESIAN_POINT('',(122.180886,-90.090938,1.585)); +#185073 = VECTOR('',#185074,1.); +#185074 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#185075 = ORIENTED_EDGE('',*,*,#185076,.T.); +#185076 = EDGE_CURVE('',#185069,#185077,#185079,.T.); +#185077 = VERTEX_POINT('',#185078); +#185078 = CARTESIAN_POINT('',(122.07845,-90.290904,1.585)); +#185079 = LINE('',#185080,#185081); +#185080 = CARTESIAN_POINT('',(122.096974,-90.216807,1.585)); +#185081 = VECTOR('',#185082,1.); +#185082 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#185083 = ORIENTED_EDGE('',*,*,#185084,.T.); +#185084 = EDGE_CURVE('',#185077,#185085,#185087,.T.); +#185085 = VERTEX_POINT('',#185086); +#185086 = CARTESIAN_POINT('',(122.155589,-90.255312,1.585)); +#185087 = LINE('',#185088,#185089); +#185088 = CARTESIAN_POINT('',(122.07845,-90.290904,1.585)); +#185089 = VECTOR('',#185090,1.); +#185090 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#185091 = ORIENTED_EDGE('',*,*,#185092,.T.); +#185092 = EDGE_CURVE('',#185085,#185093,#185095,.T.); +#185093 = VERTEX_POINT('',#185094); +#185094 = CARTESIAN_POINT('',(122.380506,-90.256534,1.585)); +#185095 = LINE('',#185096,#185097); +#185096 = CARTESIAN_POINT('',(122.155589,-90.255312,1.585)); +#185097 = VECTOR('',#185098,1.); +#185098 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#185099 = ORIENTED_EDGE('',*,*,#185100,.T.); +#185100 = EDGE_CURVE('',#185093,#185101,#185103,.T.); +#185101 = VERTEX_POINT('',#185102); +#185102 = CARTESIAN_POINT('',(122.624732,-90.504715,1.585)); +#185103 = CIRCLE('',#185104,0.348625649748); +#185104 = AXIS2_PLACEMENT_3D('',#185105,#185106,#185107); +#185105 = CARTESIAN_POINT('',(122.28733404586,-90.59247868387,1.585)); +#185106 = DIRECTION('',(0.,0.,-1.)); +#185107 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#185108 = ORIENTED_EDGE('',*,*,#185109,.T.); +#185109 = EDGE_CURVE('',#185101,#185110,#185112,.T.); +#185110 = VERTEX_POINT('',#185111); +#185111 = CARTESIAN_POINT('',(122.62351,-90.777252,1.585)); +#185112 = LINE('',#185113,#185114); +#185113 = CARTESIAN_POINT('',(122.624732,-90.504715,1.585)); +#185114 = VECTOR('',#185115,1.); +#185115 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#185116 = ORIENTED_EDGE('',*,*,#185117,.T.); +#185117 = EDGE_CURVE('',#185110,#185118,#185120,.T.); +#185118 = VERTEX_POINT('',#185119); +#185119 = CARTESIAN_POINT('',(122.375329,-91.021478,1.585)); +#185120 = CIRCLE('',#185121,0.348635327447); +#185121 = AXIS2_PLACEMENT_3D('',#185122,#185123,#185124); +#185122 = CARTESIAN_POINT('',(122.28755748129,-90.68407208415,1.585)); +#185123 = DIRECTION('',(0.,0.,-1.)); +#185124 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#185125 = ORIENTED_EDGE('',*,*,#185126,.T.); +#185126 = EDGE_CURVE('',#185118,#185127,#185129,.T.); +#185127 = VERTEX_POINT('',#185128); +#185128 = CARTESIAN_POINT('',(122.150411,-91.020256,1.585)); +#185129 = LINE('',#185130,#185131); +#185130 = CARTESIAN_POINT('',(122.375329,-91.021478,1.585)); +#185131 = VECTOR('',#185132,1.); +#185132 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#185133 = ORIENTED_EDGE('',*,*,#185134,.T.); +#185134 = EDGE_CURVE('',#185127,#185135,#185137,.T.); +#185135 = VERTEX_POINT('',#185136); +#185136 = CARTESIAN_POINT('',(121.906186,-90.772074,1.585)); +#185137 = CIRCLE('',#185138,0.348628446662); +#185138 = AXIS2_PLACEMENT_3D('',#185139,#185140,#185141); +#185139 = CARTESIAN_POINT('',(122.24358661322,-90.68430942847,1.585)); +#185140 = DIRECTION('',(0.,0.,-1.)); +#185141 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#185142 = ORIENTED_EDGE('',*,*,#185143,.T.); +#185143 = EDGE_CURVE('',#185135,#185009,#185144,.T.); +#185144 = LINE('',#185145,#185146); +#185145 = CARTESIAN_POINT('',(121.906186,-90.772074,1.585)); +#185146 = VECTOR('',#185147,1.); +#185147 = DIRECTION('',(1.92858544986E-03,0.999998140277,0.)); +#185148 = FACE_BOUND('',#185149,.F.); +#185149 = EDGE_LOOP('',(#185150,#185161,#185169,#185178,#185186,#185195, + #185203,#185212)); +#185150 = ORIENTED_EDGE('',*,*,#185151,.T.); +#185151 = EDGE_CURVE('',#185152,#185154,#185156,.T.); +#185152 = VERTEX_POINT('',#185153); +#185153 = CARTESIAN_POINT('',(122.411508,-90.438129,1.585)); +#185154 = VERTEX_POINT('',#185155); +#185155 = CARTESIAN_POINT('',(122.11941,-90.438129,1.585)); +#185156 = CIRCLE('',#185157,0.252889603602); +#185157 = AXIS2_PLACEMENT_3D('',#185158,#185159,#185160); +#185158 = CARTESIAN_POINT('',(122.265459,-90.644582,1.585)); +#185159 = DIRECTION('',(0.,0.,1.)); +#185160 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#185161 = ORIENTED_EDGE('',*,*,#185162,.T.); +#185162 = EDGE_CURVE('',#185154,#185163,#185165,.T.); +#185163 = VERTEX_POINT('',#185164); +#185164 = CARTESIAN_POINT('',(122.089003,-90.468536,1.585)); +#185165 = LINE('',#185166,#185167); +#185166 = CARTESIAN_POINT('',(122.11941,-90.438129,1.585)); +#185167 = VECTOR('',#185168,1.); +#185168 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#185169 = ORIENTED_EDGE('',*,*,#185170,.T.); +#185170 = EDGE_CURVE('',#185163,#185171,#185173,.T.); +#185171 = VERTEX_POINT('',#185172); +#185172 = CARTESIAN_POINT('',(122.089003,-90.808253,1.585)); +#185173 = CIRCLE('',#185174,0.305621483548); +#185174 = AXIS2_PLACEMENT_3D('',#185175,#185176,#185177); +#185175 = CARTESIAN_POINT('',(122.343075,-90.6383945,1.585)); +#185176 = DIRECTION('',(0.,0.,1.)); +#185177 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#185178 = ORIENTED_EDGE('',*,*,#185179,.T.); +#185179 = EDGE_CURVE('',#185171,#185180,#185182,.T.); +#185180 = VERTEX_POINT('',#185181); +#185181 = CARTESIAN_POINT('',(122.11941,-90.838661,1.585)); +#185182 = LINE('',#185183,#185184); +#185183 = CARTESIAN_POINT('',(122.089003,-90.808253,1.585)); +#185184 = VECTOR('',#185185,1.); +#185185 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#185186 = ORIENTED_EDGE('',*,*,#185187,.T.); +#185187 = EDGE_CURVE('',#185180,#185188,#185190,.T.); +#185188 = VERTEX_POINT('',#185189); +#185189 = CARTESIAN_POINT('',(122.411507,-90.838661,1.585)); +#185190 = CIRCLE('',#185191,0.252888498466); +#185191 = AXIS2_PLACEMENT_3D('',#185192,#185193,#185194); +#185192 = CARTESIAN_POINT('',(122.2654585,-90.632209,1.585)); +#185193 = DIRECTION('',(0.,0.,1.)); +#185194 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#185195 = ORIENTED_EDGE('',*,*,#185196,.T.); +#185196 = EDGE_CURVE('',#185188,#185197,#185199,.T.); +#185197 = VERTEX_POINT('',#185198); +#185198 = CARTESIAN_POINT('',(122.441914,-90.808253,1.585)); +#185199 = LINE('',#185200,#185201); +#185200 = CARTESIAN_POINT('',(122.411507,-90.838661,1.585)); +#185201 = VECTOR('',#185202,1.); +#185202 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#185203 = ORIENTED_EDGE('',*,*,#185204,.T.); +#185204 = EDGE_CURVE('',#185197,#185205,#185207,.T.); +#185205 = VERTEX_POINT('',#185206); +#185206 = CARTESIAN_POINT('',(122.441915,-90.468536,1.585)); +#185207 = CIRCLE('',#185208,0.305616146029); +#185208 = AXIS2_PLACEMENT_3D('',#185209,#185210,#185211); +#185209 = CARTESIAN_POINT('',(122.18784892049,-90.63839375212,1.585)); +#185210 = DIRECTION('',(0.,-0.,1.)); +#185211 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#185212 = ORIENTED_EDGE('',*,*,#185213,.T.); +#185213 = EDGE_CURVE('',#185205,#185152,#185214,.T.); +#185214 = LINE('',#185215,#185216); +#185215 = CARTESIAN_POINT('',(122.441915,-90.468536,1.585)); +#185216 = VECTOR('',#185217,1.); +#185217 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#185218 = PLANE('',#185219); +#185219 = AXIS2_PLACEMENT_3D('',#185220,#185221,#185222); +#185220 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185221 = DIRECTION('',(0.,0.,1.)); +#185222 = DIRECTION('',(1.,0.,-0.)); +#185223 = SHELL_BASED_SURFACE_MODEL('',(#185224)); +#185224 = OPEN_SHELL('',(#185225)); +#185225 = ADVANCED_FACE('',(#185226),#185262,.T.); +#185226 = FACE_BOUND('',#185227,.F.); +#185227 = EDGE_LOOP('',(#185228,#185239,#185247,#185256)); +#185228 = ORIENTED_EDGE('',*,*,#185229,.T.); +#185229 = EDGE_CURVE('',#185230,#185232,#185234,.T.); +#185230 = VERTEX_POINT('',#185231); +#185231 = CARTESIAN_POINT('',(134.629392,-90.8606,1.585)); +#185232 = VERTEX_POINT('',#185233); +#185233 = CARTESIAN_POINT('',(134.629392,-90.7406,1.585)); +#185234 = CIRCLE('',#185235,6.000000000043E-02); +#185235 = AXIS2_PLACEMENT_3D('',#185236,#185237,#185238); +#185236 = CARTESIAN_POINT('',(134.62939177441,-90.8006,1.585)); +#185237 = DIRECTION('',(0.,0.,-1.)); +#185238 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#185239 = ORIENTED_EDGE('',*,*,#185240,.T.); +#185240 = EDGE_CURVE('',#185232,#185241,#185243,.T.); +#185241 = VERTEX_POINT('',#185242); +#185242 = CARTESIAN_POINT('',(135.103908,-90.7406,1.585)); +#185243 = LINE('',#185244,#185245); +#185244 = CARTESIAN_POINT('',(134.629392,-90.7406,1.585)); +#185245 = VECTOR('',#185246,1.); +#185246 = DIRECTION('',(1.,0.,0.)); +#185247 = ORIENTED_EDGE('',*,*,#185248,.T.); +#185248 = EDGE_CURVE('',#185241,#185249,#185251,.T.); +#185249 = VERTEX_POINT('',#185250); +#185250 = CARTESIAN_POINT('',(135.103908,-90.8606,1.585)); +#185251 = CIRCLE('',#185252,6.000000000043E-02); +#185252 = AXIS2_PLACEMENT_3D('',#185253,#185254,#185255); +#185253 = CARTESIAN_POINT('',(135.10390822558,-90.8006,1.585)); +#185254 = DIRECTION('',(0.,0.,-1.)); +#185255 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#185256 = ORIENTED_EDGE('',*,*,#185257,.T.); +#185257 = EDGE_CURVE('',#185249,#185230,#185258,.T.); +#185258 = LINE('',#185259,#185260); +#185259 = CARTESIAN_POINT('',(135.103908,-90.8606,1.585)); +#185260 = VECTOR('',#185261,1.); +#185261 = DIRECTION('',(-1.,0.,0.)); +#185262 = PLANE('',#185263); +#185263 = AXIS2_PLACEMENT_3D('',#185264,#185265,#185266); +#185264 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185265 = DIRECTION('',(0.,0.,1.)); +#185266 = DIRECTION('',(1.,0.,-0.)); +#185267 = SHELL_BASED_SURFACE_MODEL('',(#185268)); +#185268 = OPEN_SHELL('',(#185269)); +#185269 = ADVANCED_FACE('',(#185270,#185386),#185469,.T.); +#185270 = FACE_BOUND('',#185271,.F.); +#185271 = EDGE_LOOP('',(#185272,#185283,#185291,#185299,#185307,#185315, + #185323,#185331,#185339,#185347,#185355,#185363,#185371,#185380)); +#185272 = ORIENTED_EDGE('',*,*,#185273,.T.); +#185273 = EDGE_CURVE('',#185274,#185276,#185278,.T.); +#185274 = VERTEX_POINT('',#185275); +#185275 = CARTESIAN_POINT('',(201.588346,-89.740187,1.585)); +#185276 = VERTEX_POINT('',#185277); +#185277 = CARTESIAN_POINT('',(201.661905,-89.679819,1.585)); +#185278 = CIRCLE('',#185279,7.500074938985E-02); +#185279 = AXIS2_PLACEMENT_3D('',#185280,#185281,#185282); +#185280 = CARTESIAN_POINT('',(201.66190546611,-89.75481974938,1.585)); +#185281 = DIRECTION('',(0.,0.,-1.)); +#185282 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#185283 = ORIENTED_EDGE('',*,*,#185284,.T.); +#185284 = EDGE_CURVE('',#185276,#185285,#185287,.T.); +#185285 = VERTEX_POINT('',#185286); +#185286 = CARTESIAN_POINT('',(201.907405,-89.680548,1.585)); +#185287 = LINE('',#185288,#185289); +#185288 = CARTESIAN_POINT('',(201.661905,-89.679819,1.585)); +#185289 = VECTOR('',#185290,1.); +#185290 = DIRECTION('',(0.999995591212,-2.969437010185E-03,0.)); +#185291 = ORIENTED_EDGE('',*,*,#185292,.T.); +#185292 = EDGE_CURVE('',#185285,#185293,#185295,.T.); +#185293 = VERTEX_POINT('',#185294); +#185294 = CARTESIAN_POINT('',(202.084525,-89.740078,1.585)); +#185295 = LINE('',#185296,#185297); +#185296 = CARTESIAN_POINT('',(201.907405,-89.680548,1.585)); +#185297 = VECTOR('',#185298,1.); +#185298 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#185299 = ORIENTED_EDGE('',*,*,#185300,.T.); +#185300 = EDGE_CURVE('',#185293,#185301,#185303,.T.); +#185301 = VERTEX_POINT('',#185302); +#185302 = CARTESIAN_POINT('',(202.201214,-89.85784,1.585)); +#185303 = LINE('',#185304,#185305); +#185304 = CARTESIAN_POINT('',(202.084525,-89.740078,1.585)); +#185305 = VECTOR('',#185306,1.); +#185306 = DIRECTION('',(0.703863230025,-0.710335521722,0.)); +#185307 = ORIENTED_EDGE('',*,*,#185308,.T.); +#185308 = EDGE_CURVE('',#185301,#185309,#185311,.T.); +#185309 = VERTEX_POINT('',#185310); +#185310 = CARTESIAN_POINT('',(202.258475,-89.974724,1.585)); +#185311 = LINE('',#185312,#185313); +#185312 = CARTESIAN_POINT('',(202.201214,-89.85784,1.585)); +#185313 = VECTOR('',#185314,1.); +#185314 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#185315 = ORIENTED_EDGE('',*,*,#185316,.T.); +#185316 = EDGE_CURVE('',#185309,#185317,#185319,.T.); +#185317 = VERTEX_POINT('',#185318); +#185318 = CARTESIAN_POINT('',(202.308333,-90.18339,1.585)); +#185319 = LINE('',#185320,#185321); +#185320 = CARTESIAN_POINT('',(202.258475,-89.974724,1.585)); +#185321 = VECTOR('',#185322,1.); +#185322 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#185323 = ORIENTED_EDGE('',*,*,#185324,.T.); +#185324 = EDGE_CURVE('',#185317,#185325,#185327,.T.); +#185325 = VERTEX_POINT('',#185326); +#185326 = CARTESIAN_POINT('',(202.306094,-90.344437,1.585)); +#185327 = LINE('',#185328,#185329); +#185328 = CARTESIAN_POINT('',(202.308333,-90.18339,1.585)); +#185329 = VECTOR('',#185330,1.); +#185330 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#185331 = ORIENTED_EDGE('',*,*,#185332,.T.); +#185332 = EDGE_CURVE('',#185325,#185333,#185335,.T.); +#185333 = VERTEX_POINT('',#185334); +#185334 = CARTESIAN_POINT('',(202.252796,-90.550264,1.585)); +#185335 = LINE('',#185336,#185337); +#185336 = CARTESIAN_POINT('',(202.306094,-90.344437,1.585)); +#185337 = VECTOR('',#185338,1.); +#185338 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#185339 = ORIENTED_EDGE('',*,*,#185340,.T.); +#185340 = EDGE_CURVE('',#185333,#185341,#185343,.T.); +#185341 = VERTEX_POINT('',#185342); +#185342 = CARTESIAN_POINT('',(202.195846,-90.659244,1.585)); +#185343 = LINE('',#185344,#185345); +#185344 = CARTESIAN_POINT('',(202.252796,-90.550264,1.585)); +#185345 = VECTOR('',#185346,1.); +#185346 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#185347 = ORIENTED_EDGE('',*,*,#185348,.T.); +#185348 = EDGE_CURVE('',#185341,#185349,#185351,.T.); +#185349 = VERTEX_POINT('',#185350); +#185350 = CARTESIAN_POINT('',(202.079999,-90.772357,1.585)); +#185351 = LINE('',#185352,#185353); +#185352 = CARTESIAN_POINT('',(202.195846,-90.659244,1.585)); +#185353 = VECTOR('',#185354,1.); +#185354 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#185355 = ORIENTED_EDGE('',*,*,#185356,.T.); +#185356 = EDGE_CURVE('',#185349,#185357,#185359,.T.); +#185357 = VERTEX_POINT('',#185358); +#185358 = CARTESIAN_POINT('',(201.907405,-90.829089,1.585)); +#185359 = LINE('',#185360,#185361); +#185360 = CARTESIAN_POINT('',(202.079999,-90.772357,1.585)); +#185361 = VECTOR('',#185362,1.); +#185362 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#185363 = ORIENTED_EDGE('',*,*,#185364,.T.); +#185364 = EDGE_CURVE('',#185357,#185365,#185367,.T.); +#185365 = VERTEX_POINT('',#185366); +#185366 = CARTESIAN_POINT('',(201.647273,-90.828378,1.585)); +#185367 = LINE('',#185368,#185369); +#185368 = CARTESIAN_POINT('',(201.907405,-90.829089,1.585)); +#185369 = VECTOR('',#185370,1.); +#185370 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#185371 = ORIENTED_EDGE('',*,*,#185372,.T.); +#185372 = EDGE_CURVE('',#185365,#185373,#185375,.T.); +#185373 = VERTEX_POINT('',#185374); +#185374 = CARTESIAN_POINT('',(201.586905,-90.754819,1.585)); +#185375 = CIRCLE('',#185376,7.500074938986E-02); +#185376 = AXIS2_PLACEMENT_3D('',#185377,#185378,#185379); +#185377 = CARTESIAN_POINT('',(201.66190574938,-90.75481853389,1.585)); +#185378 = DIRECTION('',(0.,0.,-1.)); +#185379 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#185380 = ORIENTED_EDGE('',*,*,#185381,.T.); +#185381 = EDGE_CURVE('',#185373,#185274,#185382,.T.); +#185382 = LINE('',#185383,#185384); +#185383 = CARTESIAN_POINT('',(201.586905,-90.754819,1.585)); +#185384 = VECTOR('',#185385,1.); +#185385 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#185386 = FACE_BOUND('',#185387,.F.); +#185387 = EDGE_LOOP('',(#185388,#185398,#185406,#185414,#185422,#185430, + #185438,#185447,#185455,#185463)); +#185388 = ORIENTED_EDGE('',*,*,#185389,.T.); +#185389 = EDGE_CURVE('',#185390,#185392,#185394,.T.); +#185390 = VERTEX_POINT('',#185391); +#185391 = CARTESIAN_POINT('',(202.002343,-89.86799,1.585)); +#185392 = VERTEX_POINT('',#185393); +#185393 = CARTESIAN_POINT('',(201.88783,-89.829819,1.585)); +#185394 = LINE('',#185395,#185396); +#185395 = CARTESIAN_POINT('',(202.002343,-89.86799,1.585)); +#185396 = VECTOR('',#185397,1.); +#185397 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#185398 = ORIENTED_EDGE('',*,*,#185399,.T.); +#185399 = EDGE_CURVE('',#185392,#185400,#185402,.T.); +#185400 = VERTEX_POINT('',#185401); +#185401 = CARTESIAN_POINT('',(201.736905,-89.829819,1.585)); +#185402 = LINE('',#185403,#185404); +#185403 = CARTESIAN_POINT('',(201.88783,-89.829819,1.585)); +#185404 = VECTOR('',#185405,1.); +#185405 = DIRECTION('',(-1.,0.,0.)); +#185406 = ORIENTED_EDGE('',*,*,#185407,.T.); +#185407 = EDGE_CURVE('',#185400,#185408,#185410,.T.); +#185408 = VERTEX_POINT('',#185409); +#185409 = CARTESIAN_POINT('',(201.736905,-90.679819,1.585)); +#185410 = LINE('',#185411,#185412); +#185411 = CARTESIAN_POINT('',(201.736905,-89.829819,1.585)); +#185412 = VECTOR('',#185413,1.); +#185413 = DIRECTION('',(0.,-1.,0.)); +#185414 = ORIENTED_EDGE('',*,*,#185415,.T.); +#185415 = EDGE_CURVE('',#185408,#185416,#185418,.T.); +#185416 = VERTEX_POINT('',#185417); +#185417 = CARTESIAN_POINT('',(201.88783,-90.679819,1.585)); +#185418 = LINE('',#185419,#185420); +#185419 = CARTESIAN_POINT('',(201.736905,-90.679819,1.585)); +#185420 = VECTOR('',#185421,1.); +#185421 = DIRECTION('',(1.,0.,0.)); +#185422 = ORIENTED_EDGE('',*,*,#185423,.T.); +#185423 = EDGE_CURVE('',#185416,#185424,#185426,.T.); +#185424 = VERTEX_POINT('',#185425); +#185425 = CARTESIAN_POINT('',(202.002343,-90.641647,1.585)); +#185426 = LINE('',#185427,#185428); +#185427 = CARTESIAN_POINT('',(201.88783,-90.679819,1.585)); +#185428 = VECTOR('',#185429,1.); +#185429 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#185430 = ORIENTED_EDGE('',*,*,#185431,.T.); +#185431 = EDGE_CURVE('',#185424,#185432,#185434,.T.); +#185432 = VERTEX_POINT('',#185433); +#185433 = CARTESIAN_POINT('',(202.076455,-90.567534,1.585)); +#185434 = LINE('',#185435,#185436); +#185435 = CARTESIAN_POINT('',(202.002343,-90.641647,1.585)); +#185436 = VECTOR('',#185437,1.); +#185437 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#185438 = ORIENTED_EDGE('',*,*,#185439,.T.); +#185439 = EDGE_CURVE('',#185432,#185440,#185442,.T.); +#185440 = VERTEX_POINT('',#185441); +#185441 = CARTESIAN_POINT('',(202.158333,-90.192624,1.585)); +#185442 = CIRCLE('',#185443,0.611719141131); +#185443 = AXIS2_PLACEMENT_3D('',#185444,#185445,#185446); +#185444 = CARTESIAN_POINT('',(201.54992096224,-90.25614643649,1.585)); +#185445 = DIRECTION('',(0.,0.,1.)); +#185446 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#185447 = ORIENTED_EDGE('',*,*,#185448,.T.); +#185448 = EDGE_CURVE('',#185440,#185449,#185451,.T.); +#185449 = VERTEX_POINT('',#185450); +#185450 = CARTESIAN_POINT('',(202.114949,-90.01909,1.585)); +#185451 = LINE('',#185452,#185453); +#185452 = CARTESIAN_POINT('',(202.158333,-90.192624,1.585)); +#185453 = VECTOR('',#185454,1.); +#185454 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#185455 = ORIENTED_EDGE('',*,*,#185456,.T.); +#185456 = EDGE_CURVE('',#185449,#185457,#185459,.T.); +#185457 = VERTEX_POINT('',#185458); +#185458 = CARTESIAN_POINT('',(202.076456,-89.942103,1.585)); +#185459 = LINE('',#185460,#185461); +#185460 = CARTESIAN_POINT('',(202.114949,-90.01909,1.585)); +#185461 = VECTOR('',#185462,1.); +#185462 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#185463 = ORIENTED_EDGE('',*,*,#185464,.T.); +#185464 = EDGE_CURVE('',#185457,#185390,#185465,.T.); +#185465 = LINE('',#185466,#185467); +#185466 = CARTESIAN_POINT('',(202.076456,-89.942103,1.585)); +#185467 = VECTOR('',#185468,1.); +#185468 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#185469 = PLANE('',#185470); +#185470 = AXIS2_PLACEMENT_3D('',#185471,#185472,#185473); +#185471 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185472 = DIRECTION('',(0.,0.,1.)); +#185473 = DIRECTION('',(1.,0.,-0.)); +#185474 = SHELL_BASED_SURFACE_MODEL('',(#185475)); +#185475 = OPEN_SHELL('',(#185476)); +#185476 = ADVANCED_FACE('',(#185477),#185750,.T.); +#185477 = FACE_BOUND('',#185478,.F.); +#185478 = EDGE_LOOP('',(#185479,#185490,#185498,#185506,#185514,#185523, + #185531,#185539,#185547,#185555,#185564,#185572,#185580,#185588, + #185597,#185605,#185613,#185621,#185630,#185638,#185647,#185655, + #185663,#185671,#185680,#185688,#185696,#185704,#185712,#185720, + #185728,#185736,#185744)); +#185479 = ORIENTED_EDGE('',*,*,#185480,.T.); +#185480 = EDGE_CURVE('',#185481,#185483,#185485,.T.); +#185481 = VERTEX_POINT('',#185482); +#185482 = CARTESIAN_POINT('',(203.816664,-89.72472,1.585)); +#185483 = VERTEX_POINT('',#185484); +#185484 = CARTESIAN_POINT('',(204.02472,-89.683336,1.585)); +#185485 = CIRCLE('',#185486,0.149999609329); +#185486 = AXIS2_PLACEMENT_3D('',#185487,#185488,#185489); +#185487 = CARTESIAN_POINT('',(203.9000000777,-89.60000039067,1.585)); +#185488 = DIRECTION('',(0.,0.,1.)); +#185489 = DIRECTION('',(-0.555575298365,-0.831466227725,0.)); +#185490 = ORIENTED_EDGE('',*,*,#185491,.T.); +#185491 = EDGE_CURVE('',#185483,#185492,#185494,.T.); +#185492 = VERTEX_POINT('',#185493); +#185493 = CARTESIAN_POINT('',(204.025636,-89.681122,1.585)); +#185494 = LINE('',#185495,#185496); +#185495 = CARTESIAN_POINT('',(204.02472,-89.683336,1.585)); +#185496 = VECTOR('',#185497,1.); +#185497 = DIRECTION('',(0.382302641044,0.924037169518,0.)); +#185498 = ORIENTED_EDGE('',*,*,#185499,.T.); +#185499 = EDGE_CURVE('',#185492,#185500,#185502,.T.); +#185500 = VERTEX_POINT('',#185501); +#185501 = CARTESIAN_POINT('',(204.057489,-89.68126,1.585)); +#185502 = LINE('',#185503,#185504); +#185503 = CARTESIAN_POINT('',(204.025636,-89.681122,1.585)); +#185504 = VECTOR('',#185505,1.); +#185505 = DIRECTION('',(0.999990615279,-4.332361312939E-03,0.)); +#185506 = ORIENTED_EDGE('',*,*,#185507,.T.); +#185507 = EDGE_CURVE('',#185500,#185508,#185510,.T.); +#185508 = VERTEX_POINT('',#185509); +#185509 = CARTESIAN_POINT('',(204.184079,-89.743188,1.585)); +#185510 = LINE('',#185511,#185512); +#185511 = CARTESIAN_POINT('',(204.057489,-89.68126,1.585)); +#185512 = VECTOR('',#185513,1.); +#185513 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#185514 = ORIENTED_EDGE('',*,*,#185515,.T.); +#185515 = EDGE_CURVE('',#185508,#185516,#185518,.T.); +#185516 = VERTEX_POINT('',#185517); +#185517 = CARTESIAN_POINT('',(204.104554,-89.86952,1.585)); +#185518 = CIRCLE('',#185519,7.500029440361E-02); +#185519 = AXIS2_PLACEMENT_3D('',#185520,#185521,#185522); +#185520 = CARTESIAN_POINT('',(204.13809505397,-89.80243764867,1.585)); +#185521 = DIRECTION('',(0.,0.,-1.)); +#185522 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#185523 = ORIENTED_EDGE('',*,*,#185524,.T.); +#185524 = EDGE_CURVE('',#185516,#185525,#185527,.T.); +#185525 = VERTEX_POINT('',#185526); +#185526 = CARTESIAN_POINT('',(204.025152,-89.829819,1.585)); +#185527 = LINE('',#185528,#185529); +#185528 = CARTESIAN_POINT('',(204.104554,-89.86952,1.585)); +#185529 = VECTOR('',#185530,1.); +#185530 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#185531 = ORIENTED_EDGE('',*,*,#185532,.T.); +#185532 = EDGE_CURVE('',#185525,#185533,#185535,.T.); +#185533 = VERTEX_POINT('',#185534); +#185534 = CARTESIAN_POINT('',(203.91217,-89.829819,1.585)); +#185535 = LINE('',#185536,#185537); +#185536 = CARTESIAN_POINT('',(204.025152,-89.829819,1.585)); +#185537 = VECTOR('',#185538,1.); +#185538 = DIRECTION('',(-1.,0.,0.)); +#185539 = ORIENTED_EDGE('',*,*,#185540,.T.); +#185540 = EDGE_CURVE('',#185533,#185541,#185543,.T.); +#185541 = VERTEX_POINT('',#185542); +#185542 = CARTESIAN_POINT('',(203.797657,-89.86799,1.585)); +#185543 = LINE('',#185544,#185545); +#185544 = CARTESIAN_POINT('',(203.91217,-89.829819,1.585)); +#185545 = VECTOR('',#185546,1.); +#185546 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#185547 = ORIENTED_EDGE('',*,*,#185548,.T.); +#185548 = EDGE_CURVE('',#185541,#185549,#185551,.T.); +#185549 = VERTEX_POINT('',#185550); +#185550 = CARTESIAN_POINT('',(203.723544,-89.942103,1.585)); +#185551 = LINE('',#185552,#185553); +#185552 = CARTESIAN_POINT('',(203.797657,-89.86799,1.585)); +#185553 = VECTOR('',#185554,1.); +#185554 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#185555 = ORIENTED_EDGE('',*,*,#185556,.T.); +#185556 = EDGE_CURVE('',#185549,#185557,#185559,.T.); +#185557 = VERTEX_POINT('',#185558); +#185558 = CARTESIAN_POINT('',(203.641667,-90.317013,1.585)); +#185559 = CIRCLE('',#185560,0.611712714362); +#185560 = AXIS2_PLACEMENT_3D('',#185561,#185562,#185563); +#185561 = CARTESIAN_POINT('',(204.25007227521,-90.2534876822,1.585)); +#185562 = DIRECTION('',(0.,0.,1.)); +#185563 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#185564 = ORIENTED_EDGE('',*,*,#185565,.T.); +#185565 = EDGE_CURVE('',#185557,#185566,#185568,.T.); +#185566 = VERTEX_POINT('',#185567); +#185567 = CARTESIAN_POINT('',(203.68505,-90.490547,1.585)); +#185568 = LINE('',#185569,#185570); +#185569 = CARTESIAN_POINT('',(203.641667,-90.317013,1.585)); +#185570 = VECTOR('',#185571,1.); +#185571 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#185572 = ORIENTED_EDGE('',*,*,#185573,.T.); +#185573 = EDGE_CURVE('',#185566,#185574,#185576,.T.); +#185574 = VERTEX_POINT('',#185575); +#185575 = CARTESIAN_POINT('',(203.723544,-90.567534,1.585)); +#185576 = LINE('',#185577,#185578); +#185577 = CARTESIAN_POINT('',(203.68505,-90.490547,1.585)); +#185578 = VECTOR('',#185579,1.); +#185579 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#185580 = ORIENTED_EDGE('',*,*,#185581,.T.); +#185581 = EDGE_CURVE('',#185574,#185582,#185584,.T.); +#185582 = VERTEX_POINT('',#185583); +#185583 = CARTESIAN_POINT('',(203.797657,-90.641648,1.585)); +#185584 = LINE('',#185585,#185586); +#185585 = CARTESIAN_POINT('',(203.723544,-90.567534,1.585)); +#185586 = VECTOR('',#185587,1.); +#185587 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#185588 = ORIENTED_EDGE('',*,*,#185589,.T.); +#185589 = EDGE_CURVE('',#185582,#185590,#185592,.T.); +#185590 = VERTEX_POINT('',#185591); +#185591 = CARTESIAN_POINT('',(204.097581,-90.641647,1.585)); +#185592 = CIRCLE('',#185593,0.299305962385); +#185593 = AXIS2_PLACEMENT_3D('',#185594,#185595,#185596); +#185594 = CARTESIAN_POINT('',(203.94761813635,-90.38261959093,1.585)); +#185595 = DIRECTION('',(0.,0.,1.)); +#185596 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#185597 = ORIENTED_EDGE('',*,*,#185598,.T.); +#185598 = EDGE_CURVE('',#185590,#185599,#185601,.T.); +#185599 = VERTEX_POINT('',#185600); +#185600 = CARTESIAN_POINT('',(204.110714,-90.628514,1.585)); +#185601 = LINE('',#185602,#185603); +#185602 = CARTESIAN_POINT('',(204.097581,-90.641647,1.585)); +#185603 = VECTOR('',#185604,1.); +#185604 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#185605 = ORIENTED_EDGE('',*,*,#185606,.T.); +#185606 = EDGE_CURVE('',#185599,#185607,#185609,.T.); +#185607 = VERTEX_POINT('',#185608); +#185608 = CARTESIAN_POINT('',(204.110714,-90.401247,1.585)); +#185609 = LINE('',#185610,#185611); +#185610 = CARTESIAN_POINT('',(204.110714,-90.628514,1.585)); +#185611 = VECTOR('',#185612,1.); +#185612 = DIRECTION('',(0.,1.,0.)); +#185613 = ORIENTED_EDGE('',*,*,#185614,.T.); +#185614 = EDGE_CURVE('',#185607,#185615,#185617,.T.); +#185615 = VERTEX_POINT('',#185616); +#185616 = CARTESIAN_POINT('',(203.980606,-90.399806,1.585)); +#185617 = LINE('',#185618,#185619); +#185618 = CARTESIAN_POINT('',(204.110714,-90.401247,1.585)); +#185619 = VECTOR('',#185620,1.); +#185620 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#185621 = ORIENTED_EDGE('',*,*,#185622,.T.); +#185622 = EDGE_CURVE('',#185615,#185623,#185625,.T.); +#185623 = VERTEX_POINT('',#185624); +#185624 = CARTESIAN_POINT('',(203.995238,-90.251247,1.585)); +#185625 = CIRCLE('',#185626,7.500006711464E-02); +#185626 = AXIS2_PLACEMENT_3D('',#185627,#185628,#185629); +#185627 = CARTESIAN_POINT('',(203.99523793288,-90.32624706711,1.585)); +#185628 = DIRECTION('',(0.,0.,-1.)); +#185629 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#185630 = ORIENTED_EDGE('',*,*,#185631,.T.); +#185631 = EDGE_CURVE('',#185623,#185632,#185634,.T.); +#185632 = VERTEX_POINT('',#185633); +#185633 = CARTESIAN_POINT('',(204.200346,-90.252688,1.585)); +#185634 = LINE('',#185635,#185636); +#185635 = CARTESIAN_POINT('',(203.995238,-90.251247,1.585)); +#185636 = VECTOR('',#185637,1.); +#185637 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#185638 = ORIENTED_EDGE('',*,*,#185639,.T.); +#185639 = EDGE_CURVE('',#185632,#185640,#185642,.T.); +#185640 = VERTEX_POINT('',#185641); +#185641 = CARTESIAN_POINT('',(204.260714,-90.326247,1.585)); +#185642 = CIRCLE('',#185643,7.500074938982E-02); +#185643 = AXIS2_PLACEMENT_3D('',#185644,#185645,#185646); +#185644 = CARTESIAN_POINT('',(204.18571325061,-90.32624746611,1.585)); +#185645 = DIRECTION('',(0.,0.,-1.)); +#185646 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#185647 = ORIENTED_EDGE('',*,*,#185648,.T.); +#185648 = EDGE_CURVE('',#185640,#185649,#185651,.T.); +#185649 = VERTEX_POINT('',#185650); +#185650 = CARTESIAN_POINT('',(204.259273,-90.674212,1.585)); +#185651 = LINE('',#185652,#185653); +#185652 = CARTESIAN_POINT('',(204.260714,-90.326247,1.585)); +#185653 = VECTOR('',#185654,1.); +#185654 = DIRECTION('',(-4.141185589904E-03,-0.999991425254,0.)); +#185655 = ORIENTED_EDGE('',*,*,#185656,.T.); +#185656 = EDGE_CURVE('',#185649,#185657,#185659,.T.); +#185657 = VERTEX_POINT('',#185658); +#185658 = CARTESIAN_POINT('',(204.238747,-90.712613,1.585)); +#185659 = LINE('',#185660,#185661); +#185660 = CARTESIAN_POINT('',(204.259273,-90.674212,1.585)); +#185661 = VECTOR('',#185662,1.); +#185662 = DIRECTION('',(-0.471400985779,-0.881918993223,0.)); +#185663 = ORIENTED_EDGE('',*,*,#185664,.T.); +#185664 = EDGE_CURVE('',#185657,#185665,#185667,.T.); +#185665 = VERTEX_POINT('',#185666); +#185666 = CARTESIAN_POINT('',(204.175237,-90.772357,1.585)); +#185667 = LINE('',#185668,#185669); +#185668 = CARTESIAN_POINT('',(204.238747,-90.712613,1.585)); +#185669 = VECTOR('',#185670,1.); +#185670 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#185671 = ORIENTED_EDGE('',*,*,#185672,.T.); +#185672 = EDGE_CURVE('',#185665,#185673,#185675,.T.); +#185673 = VERTEX_POINT('',#185674); +#185674 = CARTESIAN_POINT('',(203.715475,-90.769561,1.585)); +#185675 = CIRCLE('',#185676,0.461067828848); +#185676 = AXIS2_PLACEMENT_3D('',#185677,#185678,#185679); +#185677 = CARTESIAN_POINT('',(203.94778651268,-90.37129613352,1.585)); +#185678 = DIRECTION('',(-0.,0.,-1.)); +#185679 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#185680 = ORIENTED_EDGE('',*,*,#185681,.T.); +#185681 = EDGE_CURVE('',#185673,#185682,#185684,.T.); +#185682 = VERTEX_POINT('',#185683); +#185683 = CARTESIAN_POINT('',(203.598786,-90.651798,1.585)); +#185684 = LINE('',#185685,#185686); +#185685 = CARTESIAN_POINT('',(203.715475,-90.769561,1.585)); +#185686 = VECTOR('',#185687,1.); +#185687 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#185688 = ORIENTED_EDGE('',*,*,#185689,.T.); +#185689 = EDGE_CURVE('',#185682,#185690,#185692,.T.); +#185690 = VERTEX_POINT('',#185691); +#185691 = CARTESIAN_POINT('',(203.541525,-90.534913,1.585)); +#185692 = LINE('',#185693,#185694); +#185693 = CARTESIAN_POINT('',(203.598786,-90.651798,1.585)); +#185694 = VECTOR('',#185695,1.); +#185695 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#185696 = ORIENTED_EDGE('',*,*,#185697,.T.); +#185697 = EDGE_CURVE('',#185690,#185698,#185700,.T.); +#185698 = VERTEX_POINT('',#185699); +#185699 = CARTESIAN_POINT('',(203.491667,-90.326247,1.585)); +#185700 = LINE('',#185701,#185702); +#185701 = CARTESIAN_POINT('',(203.541525,-90.534913,1.585)); +#185702 = VECTOR('',#185703,1.); +#185703 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#185704 = ORIENTED_EDGE('',*,*,#185705,.T.); +#185705 = EDGE_CURVE('',#185698,#185706,#185708,.T.); +#185706 = VERTEX_POINT('',#185707); +#185707 = CARTESIAN_POINT('',(203.493906,-90.1652,1.585)); +#185708 = LINE('',#185709,#185710); +#185709 = CARTESIAN_POINT('',(203.491667,-90.326247,1.585)); +#185710 = VECTOR('',#185711,1.); +#185711 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#185712 = ORIENTED_EDGE('',*,*,#185713,.T.); +#185713 = EDGE_CURVE('',#185706,#185714,#185716,.T.); +#185714 = VERTEX_POINT('',#185715); +#185715 = CARTESIAN_POINT('',(203.547204,-89.959373,1.585)); +#185716 = LINE('',#185717,#185718); +#185717 = CARTESIAN_POINT('',(203.493906,-90.1652,1.585)); +#185718 = VECTOR('',#185719,1.); +#185719 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#185720 = ORIENTED_EDGE('',*,*,#185721,.T.); +#185721 = EDGE_CURVE('',#185714,#185722,#185724,.T.); +#185722 = VERTEX_POINT('',#185723); +#185723 = CARTESIAN_POINT('',(203.604153,-89.850392,1.585)); +#185724 = LINE('',#185725,#185726); +#185725 = CARTESIAN_POINT('',(203.547204,-89.959373,1.585)); +#185726 = VECTOR('',#185727,1.); +#185727 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#185728 = ORIENTED_EDGE('',*,*,#185729,.T.); +#185729 = EDGE_CURVE('',#185722,#185730,#185732,.T.); +#185730 = VERTEX_POINT('',#185731); +#185731 = CARTESIAN_POINT('',(203.72,-89.737281,1.585)); +#185732 = LINE('',#185733,#185734); +#185733 = CARTESIAN_POINT('',(203.604153,-89.850392,1.585)); +#185734 = VECTOR('',#185735,1.); +#185735 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#185736 = ORIENTED_EDGE('',*,*,#185737,.T.); +#185737 = EDGE_CURVE('',#185730,#185738,#185740,.T.); +#185738 = VERTEX_POINT('',#185739); +#185739 = CARTESIAN_POINT('',(203.802203,-89.710259,1.585)); +#185740 = LINE('',#185741,#185742); +#185741 = CARTESIAN_POINT('',(203.72,-89.737281,1.585)); +#185742 = VECTOR('',#185743,1.); +#185743 = DIRECTION('',(0.949989096257,0.312283071896,0.)); +#185744 = ORIENTED_EDGE('',*,*,#185745,.T.); +#185745 = EDGE_CURVE('',#185738,#185481,#185746,.T.); +#185746 = LINE('',#185747,#185748); +#185747 = CARTESIAN_POINT('',(203.802203,-89.710259,1.585)); +#185748 = VECTOR('',#185749,1.); +#185749 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#185750 = PLANE('',#185751); +#185751 = AXIS2_PLACEMENT_3D('',#185752,#185753,#185754); +#185752 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185753 = DIRECTION('',(0.,0.,1.)); +#185754 = DIRECTION('',(1.,0.,-0.)); +#185755 = SHELL_BASED_SURFACE_MODEL('',(#185756)); +#185756 = OPEN_SHELL('',(#185757)); +#185757 = ADVANCED_FACE('',(#185758),#185893,.T.); +#185758 = FACE_BOUND('',#185759,.F.); +#185759 = EDGE_LOOP('',(#185760,#185771,#185779,#185787,#185795,#185804, + #185812,#185820,#185829,#185837,#185845,#185854,#185862,#185870, + #185879,#185887)); +#185760 = ORIENTED_EDGE('',*,*,#185761,.T.); +#185761 = EDGE_CURVE('',#185762,#185764,#185766,.T.); +#185762 = VERTEX_POINT('',#185763); +#185763 = CARTESIAN_POINT('',(202.806398,-89.647951,1.585)); +#185764 = VERTEX_POINT('',#185765); +#185765 = CARTESIAN_POINT('',(202.923532,-89.730918,1.585)); +#185766 = CIRCLE('',#185767,7.499955990671E-02); +#185767 = AXIS2_PLACEMENT_3D('',#185768,#185769,#185770); +#185768 = CARTESIAN_POINT('',(202.85238150095,-89.70720006435,1.585)); +#185769 = DIRECTION('',(0.,0.,-1.)); +#185770 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#185771 = ORIENTED_EDGE('',*,*,#185772,.T.); +#185772 = EDGE_CURVE('',#185764,#185773,#185775,.T.); +#185773 = VERTEX_POINT('',#185774); +#185774 = CARTESIAN_POINT('',(202.718343,-90.346485,1.585)); +#185775 = LINE('',#185776,#185777); +#185776 = CARTESIAN_POINT('',(202.923532,-89.730918,1.585)); +#185777 = VECTOR('',#185778,1.); +#185778 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#185779 = ORIENTED_EDGE('',*,*,#185780,.T.); +#185780 = EDGE_CURVE('',#185773,#185781,#185783,.T.); +#185781 = VERTEX_POINT('',#185782); +#185782 = CARTESIAN_POINT('',(203.015476,-90.346485,1.585)); +#185783 = LINE('',#185784,#185785); +#185784 = CARTESIAN_POINT('',(202.718343,-90.346485,1.585)); +#185785 = VECTOR('',#185786,1.); +#185786 = DIRECTION('',(1.,0.,0.)); +#185787 = ORIENTED_EDGE('',*,*,#185788,.T.); +#185788 = EDGE_CURVE('',#185781,#185789,#185791,.T.); +#185789 = VERTEX_POINT('',#185790); +#185790 = CARTESIAN_POINT('',(203.016917,-90.07352,1.585)); +#185791 = LINE('',#185792,#185793); +#185792 = CARTESIAN_POINT('',(203.015476,-90.346485,1.585)); +#185793 = VECTOR('',#185794,1.); +#185794 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#185795 = ORIENTED_EDGE('',*,*,#185796,.T.); +#185796 = EDGE_CURVE('',#185789,#185797,#185799,.T.); +#185797 = VERTEX_POINT('',#185798); +#185798 = CARTESIAN_POINT('',(203.165476,-90.088152,1.585)); +#185799 = CIRCLE('',#185800,7.500006711464E-02); +#185800 = AXIS2_PLACEMENT_3D('',#185801,#185802,#185803); +#185801 = CARTESIAN_POINT('',(203.09047593288,-90.08815193288,1.585)); +#185802 = DIRECTION('',(0.,0.,-1.)); +#185803 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#185804 = ORIENTED_EDGE('',*,*,#185805,.T.); +#185805 = EDGE_CURVE('',#185797,#185806,#185808,.T.); +#185806 = VERTEX_POINT('',#185807); +#185807 = CARTESIAN_POINT('',(203.165476,-90.346485,1.585)); +#185808 = LINE('',#185809,#185810); +#185809 = CARTESIAN_POINT('',(203.165476,-90.088152,1.585)); +#185810 = VECTOR('',#185811,1.); +#185811 = DIRECTION('',(0.,-1.,0.)); +#185812 = ORIENTED_EDGE('',*,*,#185813,.T.); +#185813 = EDGE_CURVE('',#185806,#185814,#185816,.T.); +#185814 = VERTEX_POINT('',#185815); +#185815 = CARTESIAN_POINT('',(203.247965,-90.347926,1.585)); +#185816 = LINE('',#185817,#185818); +#185817 = CARTESIAN_POINT('',(203.165476,-90.346485,1.585)); +#185818 = VECTOR('',#185819,1.); +#185819 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#185820 = ORIENTED_EDGE('',*,*,#185821,.T.); +#185821 = EDGE_CURVE('',#185814,#185822,#185824,.T.); +#185822 = VERTEX_POINT('',#185823); +#185823 = CARTESIAN_POINT('',(203.233333,-90.496485,1.585)); +#185824 = CIRCLE('',#185825,7.500006711465E-02); +#185825 = AXIS2_PLACEMENT_3D('',#185826,#185827,#185828); +#185826 = CARTESIAN_POINT('',(203.23333306711,-90.42148493288,1.585)); +#185827 = DIRECTION('',(0.,0.,-1.)); +#185828 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#185829 = ORIENTED_EDGE('',*,*,#185830,.T.); +#185830 = EDGE_CURVE('',#185822,#185831,#185833,.T.); +#185831 = VERTEX_POINT('',#185832); +#185832 = CARTESIAN_POINT('',(203.165476,-90.496485,1.585)); +#185833 = LINE('',#185834,#185835); +#185834 = CARTESIAN_POINT('',(203.233333,-90.496485,1.585)); +#185835 = VECTOR('',#185836,1.); +#185836 = DIRECTION('',(-1.,0.,0.)); +#185837 = ORIENTED_EDGE('',*,*,#185838,.T.); +#185838 = EDGE_CURVE('',#185831,#185839,#185841,.T.); +#185839 = VERTEX_POINT('',#185840); +#185840 = CARTESIAN_POINT('',(203.164035,-90.769451,1.585)); +#185841 = LINE('',#185842,#185843); +#185842 = CARTESIAN_POINT('',(203.165476,-90.496485,1.585)); +#185843 = VECTOR('',#185844,1.); +#185844 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#185845 = ORIENTED_EDGE('',*,*,#185846,.T.); +#185846 = EDGE_CURVE('',#185839,#185847,#185849,.T.); +#185847 = VERTEX_POINT('',#185848); +#185848 = CARTESIAN_POINT('',(203.015476,-90.754819,1.585)); +#185849 = CIRCLE('',#185850,7.500006711464E-02); +#185850 = AXIS2_PLACEMENT_3D('',#185851,#185852,#185853); +#185851 = CARTESIAN_POINT('',(203.09047606711,-90.75481906711,1.585)); +#185852 = DIRECTION('',(-0.,0.,-1.)); +#185853 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#185854 = ORIENTED_EDGE('',*,*,#185855,.T.); +#185855 = EDGE_CURVE('',#185847,#185856,#185858,.T.); +#185856 = VERTEX_POINT('',#185857); +#185857 = CARTESIAN_POINT('',(203.015476,-90.496485,1.585)); +#185858 = LINE('',#185859,#185860); +#185859 = CARTESIAN_POINT('',(203.015476,-90.754819,1.585)); +#185860 = VECTOR('',#185861,1.); +#185861 = DIRECTION('',(0.,1.,0.)); +#185862 = ORIENTED_EDGE('',*,*,#185863,.T.); +#185863 = EDGE_CURVE('',#185856,#185864,#185866,.T.); +#185864 = VERTEX_POINT('',#185865); +#185865 = CARTESIAN_POINT('',(202.599654,-90.495044,1.585)); +#185866 = LINE('',#185867,#185868); +#185867 = CARTESIAN_POINT('',(203.015476,-90.496485,1.585)); +#185868 = VECTOR('',#185869,1.); +#185869 = DIRECTION('',(-0.999993995468,3.465404301562E-03,0.)); +#185870 = ORIENTED_EDGE('',*,*,#185871,.T.); +#185871 = EDGE_CURVE('',#185864,#185872,#185874,.T.); +#185872 = VERTEX_POINT('',#185873); +#185873 = CARTESIAN_POINT('',(202.543135,-90.397768,1.585)); +#185874 = CIRCLE('',#185875,7.499997045034E-02); +#185875 = AXIS2_PLACEMENT_3D('',#185876,#185877,#185878); +#185876 = CARTESIAN_POINT('',(202.61428617257,-90.42148521335,1.585)); +#185877 = DIRECTION('',(0.,0.,-1.)); +#185878 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#185879 = ORIENTED_EDGE('',*,*,#185880,.T.); +#185880 = EDGE_CURVE('',#185872,#185881,#185883,.T.); +#185881 = VERTEX_POINT('',#185882); +#185882 = CARTESIAN_POINT('',(202.787224,-89.670058,1.585)); +#185883 = LINE('',#185884,#185885); +#185884 = CARTESIAN_POINT('',(202.543135,-90.397768,1.585)); +#185885 = VECTOR('',#185886,1.); +#185886 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#185887 = ORIENTED_EDGE('',*,*,#185888,.T.); +#185888 = EDGE_CURVE('',#185881,#185762,#185889,.T.); +#185889 = LINE('',#185890,#185891); +#185890 = CARTESIAN_POINT('',(202.787224,-89.670058,1.585)); +#185891 = VECTOR('',#185892,1.); +#185892 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#185893 = PLANE('',#185894); +#185894 = AXIS2_PLACEMENT_3D('',#185895,#185896,#185897); +#185895 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185896 = DIRECTION('',(0.,0.,1.)); +#185897 = DIRECTION('',(1.,0.,-0.)); +#185898 = SHELL_BASED_SURFACE_MODEL('',(#185899)); +#185899 = OPEN_SHELL('',(#185900)); +#185900 = ADVANCED_FACE('',(#185901,#186012),#186064,.T.); +#185901 = FACE_BOUND('',#185902,.F.); +#185902 = EDGE_LOOP('',(#185903,#185914,#185922,#185931,#185939,#185948, + #185956,#185964,#185973,#185981,#185989,#185997,#186006)); +#185903 = ORIENTED_EDGE('',*,*,#185904,.T.); +#185904 = EDGE_CURVE('',#185905,#185907,#185909,.T.); +#185905 = VERTEX_POINT('',#185906); +#185906 = CARTESIAN_POINT('',(133.578805,-89.333287,1.585)); +#185907 = VERTEX_POINT('',#185908); +#185908 = CARTESIAN_POINT('',(133.652364,-89.272919,1.585)); +#185909 = CIRCLE('',#185910,7.500074938989E-02); +#185910 = AXIS2_PLACEMENT_3D('',#185911,#185912,#185913); +#185911 = CARTESIAN_POINT('',(133.65236446611,-89.34791974938,1.585)); +#185912 = DIRECTION('',(0.,0.,-1.)); +#185913 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#185914 = ORIENTED_EDGE('',*,*,#185915,.T.); +#185915 = EDGE_CURVE('',#185907,#185916,#185918,.T.); +#185916 = VERTEX_POINT('',#185917); +#185917 = CARTESIAN_POINT('',(134.047948,-89.27436,1.585)); +#185918 = LINE('',#185919,#185920); +#185919 = CARTESIAN_POINT('',(133.652364,-89.272919,1.585)); +#185920 = VECTOR('',#185921,1.); +#185921 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#185922 = ORIENTED_EDGE('',*,*,#185923,.T.); +#185923 = EDGE_CURVE('',#185916,#185924,#185926,.T.); +#185924 = VERTEX_POINT('',#185925); +#185925 = CARTESIAN_POINT('',(134.297351,-89.523763,1.585)); +#185926 = CIRCLE('',#185927,0.347870264855); +#185927 = AXIS2_PLACEMENT_3D('',#185928,#185929,#185930); +#185928 = CARTESIAN_POINT('',(133.96062026502,-89.61109073497,1.585)); +#185929 = DIRECTION('',(0.,0.,-1.)); +#185930 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#185931 = ORIENTED_EDGE('',*,*,#185932,.T.); +#185932 = EDGE_CURVE('',#185924,#185933,#185935,.T.); +#185933 = VERTEX_POINT('',#185934); +#185934 = CARTESIAN_POINT('',(134.296129,-89.701062,1.585)); +#185935 = LINE('',#185936,#185937); +#185936 = CARTESIAN_POINT('',(134.297351,-89.523763,1.585)); +#185937 = VECTOR('',#185938,1.); +#185938 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#185939 = ORIENTED_EDGE('',*,*,#185940,.T.); +#185940 = EDGE_CURVE('',#185933,#185941,#185943,.T.); +#185941 = VERTEX_POINT('',#185942); +#185942 = CARTESIAN_POINT('',(134.047948,-89.945287,1.585)); +#185943 = CIRCLE('',#185944,0.348632345848); +#185944 = AXIS2_PLACEMENT_3D('',#185945,#185946,#185947); +#185945 = CARTESIAN_POINT('',(133.96017919403,-89.6078834593,1.585)); +#185946 = DIRECTION('',(0.,0.,-1.)); +#185947 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#185948 = ORIENTED_EDGE('',*,*,#185949,.T.); +#185949 = EDGE_CURVE('',#185941,#185950,#185952,.T.); +#185950 = VERTEX_POINT('',#185951); +#185951 = CARTESIAN_POINT('',(134.034431,-89.946618,1.585)); +#185952 = LINE('',#185953,#185954); +#185953 = CARTESIAN_POINT('',(134.047948,-89.945287,1.585)); +#185954 = VECTOR('',#185955,1.); +#185955 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#185956 = ORIENTED_EDGE('',*,*,#185957,.T.); +#185957 = EDGE_CURVE('',#185950,#185958,#185960,.T.); +#185958 = VERTEX_POINT('',#185959); +#185959 = CARTESIAN_POINT('',(134.292445,-90.317723,1.585)); +#185960 = LINE('',#185961,#185962); +#185961 = CARTESIAN_POINT('',(134.034431,-89.946618,1.585)); +#185962 = VECTOR('',#185963,1.); +#185963 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#185964 = ORIENTED_EDGE('',*,*,#185965,.T.); +#185965 = EDGE_CURVE('',#185958,#185966,#185968,.T.); +#185966 = VERTEX_POINT('',#185967); +#185967 = CARTESIAN_POINT('',(134.16235,-90.390929,1.585)); +#185968 = CIRCLE('',#185969,7.500005951702E-02); +#185969 = AXIS2_PLACEMENT_3D('',#185970,#185971,#185972); +#185970 = CARTESIAN_POINT('',(134.22379206294,-90.34791874739,1.585)); +#185971 = DIRECTION('',(0.,0.,-1.)); +#185972 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#185973 = ORIENTED_EDGE('',*,*,#185974,.T.); +#185974 = EDGE_CURVE('',#185966,#185975,#185977,.T.); +#185975 = VERTEX_POINT('',#185976); +#185976 = CARTESIAN_POINT('',(133.85141,-89.946728,1.585)); +#185977 = LINE('',#185978,#185979); +#185978 = CARTESIAN_POINT('',(134.16235,-90.390929,1.585)); +#185979 = VECTOR('',#185980,1.); +#185980 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#185981 = ORIENTED_EDGE('',*,*,#185982,.T.); +#185982 = EDGE_CURVE('',#185975,#185983,#185985,.T.); +#185983 = VERTEX_POINT('',#185984); +#185984 = CARTESIAN_POINT('',(133.727364,-89.946728,1.585)); +#185985 = LINE('',#185986,#185987); +#185986 = CARTESIAN_POINT('',(133.85141,-89.946728,1.585)); +#185987 = VECTOR('',#185988,1.); +#185988 = DIRECTION('',(-1.,0.,0.)); +#185989 = ORIENTED_EDGE('',*,*,#185990,.T.); +#185990 = EDGE_CURVE('',#185983,#185991,#185993,.T.); +#185991 = VERTEX_POINT('',#185992); +#185992 = CARTESIAN_POINT('',(133.725923,-90.362551,1.585)); +#185993 = LINE('',#185994,#185995); +#185994 = CARTESIAN_POINT('',(133.727364,-89.946728,1.585)); +#185995 = VECTOR('',#185996,1.); +#185996 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#185997 = ORIENTED_EDGE('',*,*,#185998,.T.); +#185998 = EDGE_CURVE('',#185991,#185999,#186001,.T.); +#185999 = VERTEX_POINT('',#186000); +#186000 = CARTESIAN_POINT('',(133.577364,-90.347919,1.585)); +#186001 = CIRCLE('',#186002,7.500006711464E-02); +#186002 = AXIS2_PLACEMENT_3D('',#186003,#186004,#186005); +#186003 = CARTESIAN_POINT('',(133.65236406711,-90.34791906711,1.585)); +#186004 = DIRECTION('',(-0.,0.,-1.)); +#186005 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#186006 = ORIENTED_EDGE('',*,*,#186007,.T.); +#186007 = EDGE_CURVE('',#185999,#185905,#186008,.T.); +#186008 = LINE('',#186009,#186010); +#186009 = CARTESIAN_POINT('',(133.577364,-90.347919,1.585)); +#186010 = VECTOR('',#186011,1.); +#186011 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#186012 = FACE_BOUND('',#186013,.F.); +#186013 = EDGE_LOOP('',(#186014,#186025,#186033,#186041,#186049,#186058) + ); +#186014 = ORIENTED_EDGE('',*,*,#186015,.T.); +#186015 = EDGE_CURVE('',#186016,#186018,#186020,.T.); +#186016 = VERTEX_POINT('',#186017); +#186017 = CARTESIAN_POINT('',(134.148792,-89.5561,1.585)); +#186018 = VERTEX_POINT('',#186019); +#186019 = CARTESIAN_POINT('',(134.015611,-89.422919,1.585)); +#186020 = CIRCLE('',#186021,0.18686440374); +#186021 = AXIS2_PLACEMENT_3D('',#186022,#186023,#186024); +#186022 = CARTESIAN_POINT('',(133.968075,-89.603636,1.585)); +#186023 = DIRECTION('',(0.,0.,1.)); +#186024 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#186025 = ORIENTED_EDGE('',*,*,#186026,.T.); +#186026 = EDGE_CURVE('',#186018,#186027,#186029,.T.); +#186027 = VERTEX_POINT('',#186028); +#186028 = CARTESIAN_POINT('',(133.727364,-89.422919,1.585)); +#186029 = LINE('',#186030,#186031); +#186030 = CARTESIAN_POINT('',(134.015611,-89.422919,1.585)); +#186031 = VECTOR('',#186032,1.); +#186032 = DIRECTION('',(-1.,0.,0.)); +#186033 = ORIENTED_EDGE('',*,*,#186034,.T.); +#186034 = EDGE_CURVE('',#186027,#186035,#186037,.T.); +#186035 = VERTEX_POINT('',#186036); +#186036 = CARTESIAN_POINT('',(133.727364,-89.796728,1.585)); +#186037 = LINE('',#186038,#186039); +#186038 = CARTESIAN_POINT('',(133.727364,-89.422919,1.585)); +#186039 = VECTOR('',#186040,1.); +#186040 = DIRECTION('',(0.,-1.,0.)); +#186041 = ORIENTED_EDGE('',*,*,#186042,.T.); +#186042 = EDGE_CURVE('',#186035,#186043,#186045,.T.); +#186043 = VERTEX_POINT('',#186044); +#186044 = CARTESIAN_POINT('',(134.015611,-89.796728,1.585)); +#186045 = LINE('',#186046,#186047); +#186046 = CARTESIAN_POINT('',(133.727364,-89.796728,1.585)); +#186047 = VECTOR('',#186048,1.); +#186048 = DIRECTION('',(1.,0.,0.)); +#186049 = ORIENTED_EDGE('',*,*,#186050,.T.); +#186050 = EDGE_CURVE('',#186043,#186051,#186053,.T.); +#186051 = VERTEX_POINT('',#186052); +#186052 = CARTESIAN_POINT('',(134.148792,-89.663547,1.585)); +#186053 = CIRCLE('',#186054,0.18686440374); +#186054 = AXIS2_PLACEMENT_3D('',#186055,#186056,#186057); +#186055 = CARTESIAN_POINT('',(133.968075,-89.616011,1.585)); +#186056 = DIRECTION('',(0.,0.,1.)); +#186057 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#186058 = ORIENTED_EDGE('',*,*,#186059,.T.); +#186059 = EDGE_CURVE('',#186051,#186016,#186060,.T.); +#186060 = LINE('',#186061,#186062); +#186061 = CARTESIAN_POINT('',(134.148792,-89.663547,1.585)); +#186062 = VECTOR('',#186063,1.); +#186063 = DIRECTION('',(0.,1.,0.)); +#186064 = PLANE('',#186065); +#186065 = AXIS2_PLACEMENT_3D('',#186066,#186067,#186068); +#186066 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186067 = DIRECTION('',(0.,0.,1.)); +#186068 = DIRECTION('',(1.,0.,-0.)); +#186069 = SHELL_BASED_SURFACE_MODEL('',(#186070)); +#186070 = OPEN_SHELL('',(#186071)); +#186071 = ADVANCED_FACE('',(#186072),#186267,.T.); +#186072 = FACE_BOUND('',#186073,.F.); +#186073 = EDGE_LOOP('',(#186074,#186085,#186093,#186102,#186110,#186118, + #186126,#186134,#186143,#186151,#186160,#186168,#186176,#186184, + #186193,#186201,#186210,#186218,#186227,#186235,#186244,#186252, + #186261)); +#186074 = ORIENTED_EDGE('',*,*,#186075,.T.); +#186075 = EDGE_CURVE('',#186076,#186078,#186080,.T.); +#186076 = VERTEX_POINT('',#186077); +#186077 = CARTESIAN_POINT('',(134.580626,-89.32604,1.585)); +#186078 = VERTEX_POINT('',#186079); +#186079 = CARTESIAN_POINT('',(134.652364,-89.272919,1.585)); +#186080 = CIRCLE('',#186081,7.50033610077E-02); +#186081 = AXIS2_PLACEMENT_3D('',#186082,#186083,#186084); +#186082 = CARTESIAN_POINT('',(134.6523662707,-89.34792236097,1.585)); +#186083 = DIRECTION('',(0.,0.,-1.)); +#186084 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#186085 = ORIENTED_EDGE('',*,*,#186086,.T.); +#186086 = EDGE_CURVE('',#186078,#186087,#186089,.T.); +#186087 = VERTEX_POINT('',#186088); +#186088 = CARTESIAN_POINT('',(135.143186,-89.27436,1.585)); +#186089 = LINE('',#186090,#186091); +#186090 = CARTESIAN_POINT('',(134.652364,-89.272919,1.585)); +#186091 = VECTOR('',#186092,1.); +#186092 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#186093 = ORIENTED_EDGE('',*,*,#186094,.T.); +#186094 = EDGE_CURVE('',#186087,#186095,#186097,.T.); +#186095 = VERTEX_POINT('',#186096); +#186096 = CARTESIAN_POINT('',(135.128554,-89.422919,1.585)); +#186097 = CIRCLE('',#186098,7.500006711463E-02); +#186098 = AXIS2_PLACEMENT_3D('',#186099,#186100,#186101); +#186099 = CARTESIAN_POINT('',(135.12855406711,-89.34791893288,1.585)); +#186100 = DIRECTION('',(0.,0.,-1.)); +#186101 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#186102 = ORIENTED_EDGE('',*,*,#186103,.T.); +#186103 = EDGE_CURVE('',#186095,#186104,#186106,.T.); +#186104 = VERTEX_POINT('',#186105); +#186105 = CARTESIAN_POINT('',(134.720238,-89.422919,1.585)); +#186106 = LINE('',#186107,#186108); +#186107 = CARTESIAN_POINT('',(135.128554,-89.422919,1.585)); +#186108 = VECTOR('',#186109,1.); +#186109 = DIRECTION('',(-1.,0.,0.)); +#186110 = ORIENTED_EDGE('',*,*,#186111,.T.); +#186111 = EDGE_CURVE('',#186104,#186112,#186114,.T.); +#186112 = VERTEX_POINT('',#186113); +#186113 = CARTESIAN_POINT('',(134.695419,-89.671109,1.585)); +#186114 = LINE('',#186115,#186116); +#186115 = CARTESIAN_POINT('',(134.720238,-89.422919,1.585)); +#186116 = VECTOR('',#186117,1.); +#186117 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#186118 = ORIENTED_EDGE('',*,*,#186119,.T.); +#186119 = EDGE_CURVE('',#186112,#186120,#186122,.T.); +#186120 = VERTEX_POINT('',#186121); +#186121 = CARTESIAN_POINT('',(134.73297,-89.655312,1.585)); +#186122 = LINE('',#186123,#186124); +#186123 = CARTESIAN_POINT('',(134.695419,-89.671109,1.585)); +#186124 = VECTOR('',#186125,1.); +#186125 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#186126 = ORIENTED_EDGE('',*,*,#186127,.T.); +#186127 = EDGE_CURVE('',#186120,#186128,#186130,.T.); +#186128 = VERTEX_POINT('',#186129); +#186129 = CARTESIAN_POINT('',(135.005506,-89.656534,1.585)); +#186130 = LINE('',#186131,#186132); +#186131 = CARTESIAN_POINT('',(134.73297,-89.655312,1.585)); +#186132 = VECTOR('',#186133,1.); +#186133 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#186134 = ORIENTED_EDGE('',*,*,#186135,.T.); +#186135 = EDGE_CURVE('',#186128,#186136,#186138,.T.); +#186136 = VERTEX_POINT('',#186137); +#186137 = CARTESIAN_POINT('',(135.249732,-89.904715,1.585)); +#186138 = CIRCLE('',#186139,0.348625649748); +#186139 = AXIS2_PLACEMENT_3D('',#186140,#186141,#186142); +#186140 = CARTESIAN_POINT('',(134.91233404586,-89.99247868387,1.585)); +#186141 = DIRECTION('',(0.,0.,-1.)); +#186142 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#186143 = ORIENTED_EDGE('',*,*,#186144,.T.); +#186144 = EDGE_CURVE('',#186136,#186145,#186147,.T.); +#186145 = VERTEX_POINT('',#186146); +#186146 = CARTESIAN_POINT('',(135.24851,-90.177252,1.585)); +#186147 = LINE('',#186148,#186149); +#186148 = CARTESIAN_POINT('',(135.249732,-89.904715,1.585)); +#186149 = VECTOR('',#186150,1.); +#186150 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#186151 = ORIENTED_EDGE('',*,*,#186152,.T.); +#186152 = EDGE_CURVE('',#186145,#186153,#186155,.T.); +#186153 = VERTEX_POINT('',#186154); +#186154 = CARTESIAN_POINT('',(135.000329,-90.421478,1.585)); +#186155 = CIRCLE('',#186156,0.348635327447); +#186156 = AXIS2_PLACEMENT_3D('',#186157,#186158,#186159); +#186157 = CARTESIAN_POINT('',(134.91255748129,-90.08407208415,1.585)); +#186158 = DIRECTION('',(0.,0.,-1.)); +#186159 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#186160 = ORIENTED_EDGE('',*,*,#186161,.T.); +#186161 = EDGE_CURVE('',#186153,#186162,#186164,.T.); +#186162 = VERTEX_POINT('',#186163); +#186163 = CARTESIAN_POINT('',(134.727792,-90.420256,1.585)); +#186164 = LINE('',#186165,#186166); +#186165 = CARTESIAN_POINT('',(135.000329,-90.421478,1.585)); +#186166 = VECTOR('',#186167,1.); +#186167 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#186168 = ORIENTED_EDGE('',*,*,#186169,.T.); +#186169 = EDGE_CURVE('',#186162,#186170,#186172,.T.); +#186170 = VERTEX_POINT('',#186171); +#186171 = CARTESIAN_POINT('',(134.605079,-90.35805,1.585)); +#186172 = LINE('',#186173,#186174); +#186173 = CARTESIAN_POINT('',(134.727792,-90.420256,1.585)); +#186174 = VECTOR('',#186175,1.); +#186175 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#186176 = ORIENTED_EDGE('',*,*,#186177,.T.); +#186177 = EDGE_CURVE('',#186170,#186178,#186180,.T.); +#186178 = VERTEX_POINT('',#186179); +#186179 = CARTESIAN_POINT('',(134.542384,-90.294347,1.585)); +#186180 = LINE('',#186181,#186182); +#186181 = CARTESIAN_POINT('',(134.605079,-90.35805,1.585)); +#186182 = VECTOR('',#186183,1.); +#186183 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#186184 = ORIENTED_EDGE('',*,*,#186185,.T.); +#186185 = EDGE_CURVE('',#186178,#186186,#186188,.T.); +#186186 = VERTEX_POINT('',#186187); +#186187 = CARTESIAN_POINT('',(134.657779,-90.199648,1.585)); +#186188 = CIRCLE('',#186189,7.50001266804E-02); +#186189 = AXIS2_PLACEMENT_3D('',#186190,#186191,#186192); +#186190 = CARTESIAN_POINT('',(134.60474505199,-90.25268024831,1.585)); +#186191 = DIRECTION('',(0.,0.,-1.)); +#186192 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#186193 = ORIENTED_EDGE('',*,*,#186194,.T.); +#186194 = EDGE_CURVE('',#186186,#186195,#186197,.T.); +#186195 = VERTEX_POINT('',#186196); +#186196 = CARTESIAN_POINT('',(134.696791,-90.238661,1.585)); +#186197 = LINE('',#186198,#186199); +#186198 = CARTESIAN_POINT('',(134.657779,-90.199648,1.585)); +#186199 = VECTOR('',#186200,1.); +#186200 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#186201 = ORIENTED_EDGE('',*,*,#186202,.T.); +#186202 = EDGE_CURVE('',#186195,#186203,#186205,.T.); +#186203 = VERTEX_POINT('',#186204); +#186204 = CARTESIAN_POINT('',(135.036507,-90.238661,1.585)); +#186205 = CIRCLE('',#186206,0.305620374329); +#186206 = AXIS2_PLACEMENT_3D('',#186207,#186208,#186209); +#186207 = CARTESIAN_POINT('',(134.866649,-89.98459,1.585)); +#186208 = DIRECTION('',(0.,0.,1.)); +#186209 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#186210 = ORIENTED_EDGE('',*,*,#186211,.T.); +#186211 = EDGE_CURVE('',#186203,#186212,#186214,.T.); +#186212 = VERTEX_POINT('',#186213); +#186213 = CARTESIAN_POINT('',(135.066914,-90.208253,1.585)); +#186214 = LINE('',#186215,#186216); +#186215 = CARTESIAN_POINT('',(135.036507,-90.238661,1.585)); +#186216 = VECTOR('',#186217,1.); +#186217 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#186218 = ORIENTED_EDGE('',*,*,#186219,.T.); +#186219 = EDGE_CURVE('',#186212,#186220,#186222,.T.); +#186220 = VERTEX_POINT('',#186221); +#186221 = CARTESIAN_POINT('',(135.066915,-89.868536,1.585)); +#186222 = CIRCLE('',#186223,0.305616146029); +#186223 = AXIS2_PLACEMENT_3D('',#186224,#186225,#186226); +#186224 = CARTESIAN_POINT('',(134.81284892049,-90.03839375212,1.585)); +#186225 = DIRECTION('',(0.,-0.,1.)); +#186226 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#186227 = ORIENTED_EDGE('',*,*,#186228,.T.); +#186228 = EDGE_CURVE('',#186220,#186229,#186231,.T.); +#186229 = VERTEX_POINT('',#186230); +#186230 = CARTESIAN_POINT('',(135.036508,-89.838129,1.585)); +#186231 = LINE('',#186232,#186233); +#186232 = CARTESIAN_POINT('',(135.066915,-89.868536,1.585)); +#186233 = VECTOR('',#186234,1.); +#186234 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#186235 = ORIENTED_EDGE('',*,*,#186236,.T.); +#186236 = EDGE_CURVE('',#186229,#186237,#186239,.T.); +#186237 = VERTEX_POINT('',#186238); +#186238 = CARTESIAN_POINT('',(134.696791,-89.838129,1.585)); +#186239 = CIRCLE('',#186240,0.305621483548); +#186240 = AXIS2_PLACEMENT_3D('',#186241,#186242,#186243); +#186241 = CARTESIAN_POINT('',(134.8666495,-90.092201,1.585)); +#186242 = DIRECTION('',(0.,0.,1.)); +#186243 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#186244 = ORIENTED_EDGE('',*,*,#186245,.T.); +#186245 = EDGE_CURVE('',#186237,#186246,#186248,.T.); +#186246 = VERTEX_POINT('',#186247); +#186247 = CARTESIAN_POINT('',(134.640001,-89.890306,1.585)); +#186248 = LINE('',#186249,#186250); +#186249 = CARTESIAN_POINT('',(134.696791,-89.838129,1.585)); +#186250 = VECTOR('',#186251,1.); +#186251 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#186252 = ORIENTED_EDGE('',*,*,#186253,.T.); +#186253 = EDGE_CURVE('',#186246,#186254,#186256,.T.); +#186254 = VERTEX_POINT('',#186255); +#186255 = CARTESIAN_POINT('',(134.530095,-89.831349,1.585)); +#186256 = CIRCLE('',#186257,7.500024172472E-02); +#186257 = AXIS2_PLACEMENT_3D('',#186258,#186259,#186260); +#186258 = CARTESIAN_POINT('',(134.60474497002,-89.82410895619,1.585)); +#186259 = DIRECTION('',(-0.,0.,-1.)); +#186260 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#186261 = ORIENTED_EDGE('',*,*,#186262,.T.); +#186262 = EDGE_CURVE('',#186254,#186076,#186263,.T.); +#186263 = LINE('',#186264,#186265); +#186264 = CARTESIAN_POINT('',(134.530095,-89.831349,1.585)); +#186265 = VECTOR('',#186266,1.); +#186266 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#186267 = PLANE('',#186268); +#186268 = AXIS2_PLACEMENT_3D('',#186269,#186270,#186271); +#186269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186270 = DIRECTION('',(0.,0.,1.)); +#186271 = DIRECTION('',(1.,0.,-0.)); +#186272 = SHELL_BASED_SURFACE_MODEL('',(#186273)); +#186273 = OPEN_SHELL('',(#186274)); +#186274 = ADVANCED_FACE('',(#186275),#186461,.T.); +#186275 = FACE_BOUND('',#186276,.F.); +#186276 = EDGE_LOOP('',(#186277,#186288,#186296,#186305,#186313,#186321, + #186330,#186338,#186347,#186355,#186363,#186371,#186380,#186388, + #186397,#186405,#186414,#186422,#186430,#186438,#186447,#186455)); +#186277 = ORIENTED_EDGE('',*,*,#186278,.T.); +#186278 = EDGE_CURVE('',#186279,#186281,#186283,.T.); +#186279 = VERTEX_POINT('',#186280); +#186280 = CARTESIAN_POINT('',(135.494875,-89.421478,1.585)); +#186281 = VERTEX_POINT('',#186282); +#186282 = CARTESIAN_POINT('',(135.509507,-89.272919,1.585)); +#186283 = CIRCLE('',#186284,7.500006711463E-02); +#186284 = AXIS2_PLACEMENT_3D('',#186285,#186286,#186287); +#186285 = CARTESIAN_POINT('',(135.50950693288,-89.34791906711,1.585)); +#186286 = DIRECTION('',(0.,0.,-1.)); +#186287 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#186288 = ORIENTED_EDGE('',*,*,#186289,.T.); +#186289 = EDGE_CURVE('',#186281,#186290,#186292,.T.); +#186290 = VERTEX_POINT('',#186291); +#186291 = CARTESIAN_POINT('',(136.136292,-89.273681,1.585)); +#186292 = LINE('',#186293,#186294); +#186293 = CARTESIAN_POINT('',(135.509507,-89.272919,1.585)); +#186294 = VECTOR('',#186295,1.); +#186295 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#186296 = ORIENTED_EDGE('',*,*,#186297,.T.); +#186297 = EDGE_CURVE('',#186290,#186298,#186300,.T.); +#186298 = VERTEX_POINT('',#186299); +#186299 = CARTESIAN_POINT('',(136.202113,-89.362551,1.585)); +#186300 = CIRCLE('',#186301,7.447391611626E-02); +#186301 = AXIS2_PLACEMENT_3D('',#186302,#186303,#186304); +#186302 = CARTESIAN_POINT('',(136.12911292664,-89.3478080874,1.585)); +#186303 = DIRECTION('',(0.,0.,-1.)); +#186304 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#186305 = ORIENTED_EDGE('',*,*,#186306,.T.); +#186306 = EDGE_CURVE('',#186298,#186307,#186309,.T.); +#186307 = VERTEX_POINT('',#186308); +#186308 = CARTESIAN_POINT('',(136.184997,-89.397307,1.585)); +#186309 = LINE('',#186310,#186311); +#186310 = CARTESIAN_POINT('',(136.202113,-89.362551,1.585)); +#186311 = VECTOR('',#186312,1.); +#186312 = DIRECTION('',(-0.441795255026,-0.897115908139,0.)); +#186313 = ORIENTED_EDGE('',*,*,#186314,.T.); +#186314 = EDGE_CURVE('',#186307,#186315,#186317,.T.); +#186315 = VERTEX_POINT('',#186316); +#186316 = CARTESIAN_POINT('',(135.958101,-89.656616,1.585)); +#186317 = LINE('',#186318,#186319); +#186318 = CARTESIAN_POINT('',(136.184997,-89.397307,1.585)); +#186319 = VECTOR('',#186320,1.); +#186320 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#186321 = ORIENTED_EDGE('',*,*,#186322,.T.); +#186322 = EDGE_CURVE('',#186315,#186323,#186325,.T.); +#186323 = VERTEX_POINT('',#186324); +#186324 = CARTESIAN_POINT('',(136.202113,-89.904715,1.585)); +#186325 = CIRCLE('',#186326,0.348520834816); +#186326 = AXIS2_PLACEMENT_3D('',#186327,#186328,#186329); +#186327 = CARTESIAN_POINT('',(135.8648076174,-89.99241819931,1.585)); +#186328 = DIRECTION('',(0.,0.,-1.)); +#186329 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#186330 = ORIENTED_EDGE('',*,*,#186331,.T.); +#186331 = EDGE_CURVE('',#186323,#186332,#186334,.T.); +#186332 = VERTEX_POINT('',#186333); +#186333 = CARTESIAN_POINT('',(136.200891,-90.177252,1.585)); +#186334 = LINE('',#186335,#186336); +#186335 = CARTESIAN_POINT('',(136.202113,-89.904715,1.585)); +#186336 = VECTOR('',#186337,1.); +#186337 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#186338 = ORIENTED_EDGE('',*,*,#186339,.T.); +#186339 = EDGE_CURVE('',#186332,#186340,#186342,.T.); +#186340 = VERTEX_POINT('',#186341); +#186341 = CARTESIAN_POINT('',(135.95271,-90.421478,1.585)); +#186342 = CIRCLE('',#186343,0.348635327447); +#186343 = AXIS2_PLACEMENT_3D('',#186344,#186345,#186346); +#186344 = CARTESIAN_POINT('',(135.86493848129,-90.08407208415,1.585)); +#186345 = DIRECTION('',(0.,0.,-1.)); +#186346 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#186347 = ORIENTED_EDGE('',*,*,#186348,.T.); +#186348 = EDGE_CURVE('',#186340,#186349,#186351,.T.); +#186349 = VERTEX_POINT('',#186350); +#186350 = CARTESIAN_POINT('',(135.632554,-90.420256,1.585)); +#186351 = LINE('',#186352,#186353); +#186352 = CARTESIAN_POINT('',(135.95271,-90.421478,1.585)); +#186353 = VECTOR('',#186354,1.); +#186354 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#186355 = ORIENTED_EDGE('',*,*,#186356,.T.); +#186356 = EDGE_CURVE('',#186349,#186357,#186359,.T.); +#186357 = VERTEX_POINT('',#186358); +#186358 = CARTESIAN_POINT('',(135.509841,-90.35805,1.585)); +#186359 = LINE('',#186360,#186361); +#186360 = CARTESIAN_POINT('',(135.632554,-90.420256,1.585)); +#186361 = VECTOR('',#186362,1.); +#186362 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#186363 = ORIENTED_EDGE('',*,*,#186364,.T.); +#186364 = EDGE_CURVE('',#186357,#186365,#186367,.T.); +#186365 = VERTEX_POINT('',#186366); +#186366 = CARTESIAN_POINT('',(135.447146,-90.294347,1.585)); +#186367 = LINE('',#186368,#186369); +#186368 = CARTESIAN_POINT('',(135.509841,-90.35805,1.585)); +#186369 = VECTOR('',#186370,1.); +#186370 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#186371 = ORIENTED_EDGE('',*,*,#186372,.T.); +#186372 = EDGE_CURVE('',#186365,#186373,#186375,.T.); +#186373 = VERTEX_POINT('',#186374); +#186374 = CARTESIAN_POINT('',(135.562541,-90.199648,1.585)); +#186375 = CIRCLE('',#186376,7.50001266804E-02); +#186376 = AXIS2_PLACEMENT_3D('',#186377,#186378,#186379); +#186377 = CARTESIAN_POINT('',(135.50950705199,-90.25268024831,1.585)); +#186378 = DIRECTION('',(0.,0.,-1.)); +#186379 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#186380 = ORIENTED_EDGE('',*,*,#186381,.T.); +#186381 = EDGE_CURVE('',#186373,#186382,#186384,.T.); +#186382 = VERTEX_POINT('',#186383); +#186383 = CARTESIAN_POINT('',(135.601553,-90.238661,1.585)); +#186384 = LINE('',#186385,#186386); +#186385 = CARTESIAN_POINT('',(135.562541,-90.199648,1.585)); +#186386 = VECTOR('',#186387,1.); +#186387 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#186388 = ORIENTED_EDGE('',*,*,#186389,.T.); +#186389 = EDGE_CURVE('',#186382,#186390,#186392,.T.); +#186390 = VERTEX_POINT('',#186391); +#186391 = CARTESIAN_POINT('',(135.988888,-90.238661,1.585)); +#186392 = CIRCLE('',#186393,0.358502380266); +#186393 = AXIS2_PLACEMENT_3D('',#186394,#186395,#186396); +#186394 = CARTESIAN_POINT('',(135.7952205,-89.936971,1.585)); +#186395 = DIRECTION('',(0.,0.,1.)); +#186396 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#186397 = ORIENTED_EDGE('',*,*,#186398,.T.); +#186398 = EDGE_CURVE('',#186390,#186399,#186401,.T.); +#186399 = VERTEX_POINT('',#186400); +#186400 = CARTESIAN_POINT('',(136.019295,-90.208253,1.585)); +#186401 = LINE('',#186402,#186403); +#186402 = CARTESIAN_POINT('',(135.988888,-90.238661,1.585)); +#186403 = VECTOR('',#186404,1.); +#186404 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#186405 = ORIENTED_EDGE('',*,*,#186406,.T.); +#186406 = EDGE_CURVE('',#186399,#186407,#186409,.T.); +#186407 = VERTEX_POINT('',#186408); +#186408 = CARTESIAN_POINT('',(136.019296,-89.868536,1.585)); +#186409 = CIRCLE('',#186410,0.305616146029); +#186410 = AXIS2_PLACEMENT_3D('',#186411,#186412,#186413); +#186411 = CARTESIAN_POINT('',(135.76522992049,-90.03839375212,1.585)); +#186412 = DIRECTION('',(0.,-0.,1.)); +#186413 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#186414 = ORIENTED_EDGE('',*,*,#186415,.T.); +#186415 = EDGE_CURVE('',#186407,#186416,#186418,.T.); +#186416 = VERTEX_POINT('',#186417); +#186417 = CARTESIAN_POINT('',(135.988889,-89.838129,1.585)); +#186418 = LINE('',#186419,#186420); +#186419 = CARTESIAN_POINT('',(136.019296,-89.868536,1.585)); +#186420 = VECTOR('',#186421,1.); +#186421 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#186422 = ORIENTED_EDGE('',*,*,#186423,.T.); +#186423 = EDGE_CURVE('',#186416,#186424,#186426,.T.); +#186424 = VERTEX_POINT('',#186425); +#186425 = CARTESIAN_POINT('',(135.920373,-89.803871,1.585)); +#186426 = LINE('',#186427,#186428); +#186427 = CARTESIAN_POINT('',(135.988889,-89.838129,1.585)); +#186428 = VECTOR('',#186429,1.); +#186429 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#186430 = ORIENTED_EDGE('',*,*,#186431,.T.); +#186431 = EDGE_CURVE('',#186424,#186432,#186434,.T.); +#186432 = VERTEX_POINT('',#186433); +#186433 = CARTESIAN_POINT('',(135.780589,-89.80243,1.585)); +#186434 = LINE('',#186435,#186436); +#186435 = CARTESIAN_POINT('',(135.920373,-89.803871,1.585)); +#186436 = VECTOR('',#186437,1.); +#186437 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#186438 = ORIENTED_EDGE('',*,*,#186439,.T.); +#186439 = EDGE_CURVE('',#186432,#186440,#186442,.T.); +#186440 = VERTEX_POINT('',#186441); +#186441 = CARTESIAN_POINT('',(135.738778,-89.679483,1.585)); +#186442 = CIRCLE('',#186443,7.500015628759E-02); +#186443 = AXIS2_PLACEMENT_3D('',#186444,#186445,#186446); +#186444 = CARTESIAN_POINT('',(135.79522128432,-89.7288710461,1.585)); +#186445 = DIRECTION('',(0.,0.,-1.)); +#186446 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#186447 = ORIENTED_EDGE('',*,*,#186448,.T.); +#186448 = EDGE_CURVE('',#186440,#186449,#186451,.T.); +#186449 = VERTEX_POINT('',#186450); +#186450 = CARTESIAN_POINT('',(135.963272,-89.422919,1.585)); +#186451 = LINE('',#186452,#186453); +#186452 = CARTESIAN_POINT('',(135.738778,-89.679483,1.585)); +#186453 = VECTOR('',#186454,1.); +#186454 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#186455 = ORIENTED_EDGE('',*,*,#186456,.T.); +#186456 = EDGE_CURVE('',#186449,#186279,#186457,.T.); +#186457 = LINE('',#186458,#186459); +#186458 = CARTESIAN_POINT('',(135.963272,-89.422919,1.585)); +#186459 = VECTOR('',#186460,1.); +#186460 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#186461 = PLANE('',#186462); +#186462 = AXIS2_PLACEMENT_3D('',#186463,#186464,#186465); +#186463 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186464 = DIRECTION('',(0.,0.,1.)); +#186465 = DIRECTION('',(1.,0.,-0.)); +#186466 = SHELL_BASED_SURFACE_MODEL('',(#186467)); +#186467 = OPEN_SHELL('',(#186468)); +#186468 = ADVANCED_FACE('',(#186469),#186563,.T.); +#186469 = FACE_BOUND('',#186470,.F.); +#186470 = EDGE_LOOP('',(#186471,#186482,#186490,#186498,#186506,#186515, + #186523,#186532,#186540,#186549,#186557)); +#186471 = ORIENTED_EDGE('',*,*,#186472,.T.); +#186472 = EDGE_CURVE('',#186473,#186475,#186477,.T.); +#186473 = VERTEX_POINT('',#186474); +#186474 = CARTESIAN_POINT('',(110.601217,-89.670139,1.585)); +#186475 = VERTEX_POINT('',#186476); +#186476 = CARTESIAN_POINT('',(110.712083,-89.670139,1.585)); +#186477 = CIRCLE('',#186478,6.000020841631E-02); +#186478 = AXIS2_PLACEMENT_3D('',#186479,#186480,#186481); +#186479 = CARTESIAN_POINT('',(110.65665,-89.6931,1.585)); +#186480 = DIRECTION('',(0.,0.,-1.)); +#186481 = DIRECTION('',(-0.923880124139,0.382682004047,0.)); +#186482 = ORIENTED_EDGE('',*,*,#186483,.T.); +#186483 = EDGE_CURVE('',#186475,#186484,#186486,.T.); +#186484 = VERTEX_POINT('',#186485); +#186485 = CARTESIAN_POINT('',(110.71665,-89.7281,1.585)); +#186486 = LINE('',#186487,#186488); +#186487 = CARTESIAN_POINT('',(110.712083,-89.670139,1.585)); +#186488 = VECTOR('',#186489,1.); +#186489 = DIRECTION('',(7.855089539712E-02,-0.99691010469,0.)); +#186490 = ORIENTED_EDGE('',*,*,#186491,.T.); +#186491 = EDGE_CURVE('',#186484,#186492,#186494,.T.); +#186492 = VERTEX_POINT('',#186493); +#186493 = CARTESIAN_POINT('',(114.71665,-89.7281,1.585)); +#186494 = LINE('',#186495,#186496); +#186495 = CARTESIAN_POINT('',(110.71665,-89.7281,1.585)); +#186496 = VECTOR('',#186497,1.); +#186497 = DIRECTION('',(1.,0.,0.)); +#186498 = ORIENTED_EDGE('',*,*,#186499,.T.); +#186499 = EDGE_CURVE('',#186492,#186500,#186502,.T.); +#186500 = VERTEX_POINT('',#186501); +#186501 = CARTESIAN_POINT('',(114.721217,-89.670139,1.585)); +#186502 = LINE('',#186503,#186504); +#186503 = CARTESIAN_POINT('',(114.71665,-89.7281,1.585)); +#186504 = VECTOR('',#186505,1.); +#186505 = DIRECTION('',(7.855089539712E-02,0.99691010469,0.)); +#186506 = ORIENTED_EDGE('',*,*,#186507,.T.); +#186507 = EDGE_CURVE('',#186500,#186508,#186510,.T.); +#186508 = VERTEX_POINT('',#186509); +#186509 = CARTESIAN_POINT('',(114.83665,-89.6931,1.585)); +#186510 = CIRCLE('',#186511,6.000007318647E-02); +#186511 = AXIS2_PLACEMENT_3D('',#186512,#186513,#186514); +#186512 = CARTESIAN_POINT('',(114.77664992681,-89.69309982331,1.585)); +#186513 = DIRECTION('',(0.,0.,-1.)); +#186514 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#186515 = ORIENTED_EDGE('',*,*,#186516,.T.); +#186516 = EDGE_CURVE('',#186508,#186517,#186519,.T.); +#186517 = VERTEX_POINT('',#186518); +#186518 = CARTESIAN_POINT('',(114.83665,-89.7881,1.585)); +#186519 = LINE('',#186520,#186521); +#186520 = CARTESIAN_POINT('',(114.83665,-89.6931,1.585)); +#186521 = VECTOR('',#186522,1.); +#186522 = DIRECTION('',(0.,-1.,0.)); +#186523 = ORIENTED_EDGE('',*,*,#186524,.T.); +#186524 = EDGE_CURVE('',#186517,#186525,#186527,.T.); +#186525 = VERTEX_POINT('',#186526); +#186526 = CARTESIAN_POINT('',(114.77665,-89.8481,1.585)); +#186527 = CIRCLE('',#186528,5.999932016264E-02); +#186528 = AXIS2_PLACEMENT_3D('',#186529,#186530,#186531); +#186529 = CARTESIAN_POINT('',(114.77665067984,-89.78810067984,1.585)); +#186530 = DIRECTION('',(0.,0.,-1.)); +#186531 = DIRECTION('',(0.999999999936,1.133081517402E-05,0.)); +#186532 = ORIENTED_EDGE('',*,*,#186533,.T.); +#186533 = EDGE_CURVE('',#186525,#186534,#186536,.T.); +#186534 = VERTEX_POINT('',#186535); +#186535 = CARTESIAN_POINT('',(110.65665,-89.8481,1.585)); +#186536 = LINE('',#186537,#186538); +#186537 = CARTESIAN_POINT('',(114.77665,-89.8481,1.585)); +#186538 = VECTOR('',#186539,1.); +#186539 = DIRECTION('',(-1.,0.,0.)); +#186540 = ORIENTED_EDGE('',*,*,#186541,.T.); +#186541 = EDGE_CURVE('',#186534,#186542,#186544,.T.); +#186542 = VERTEX_POINT('',#186543); +#186543 = CARTESIAN_POINT('',(110.59665,-89.7881,1.585)); +#186544 = CIRCLE('',#186545,5.999932016264E-02); +#186545 = AXIS2_PLACEMENT_3D('',#186546,#186547,#186548); +#186546 = CARTESIAN_POINT('',(110.65664932015,-89.78810067984,1.585)); +#186547 = DIRECTION('',(0.,0.,-1.)); +#186548 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#186549 = ORIENTED_EDGE('',*,*,#186550,.T.); +#186550 = EDGE_CURVE('',#186542,#186551,#186553,.T.); +#186551 = VERTEX_POINT('',#186552); +#186552 = CARTESIAN_POINT('',(110.59665,-89.6931,1.585)); +#186553 = LINE('',#186554,#186555); +#186554 = CARTESIAN_POINT('',(110.59665,-89.7881,1.585)); +#186555 = VECTOR('',#186556,1.); +#186556 = DIRECTION('',(0.,1.,0.)); +#186557 = ORIENTED_EDGE('',*,*,#186558,.T.); +#186558 = EDGE_CURVE('',#186551,#186473,#186559,.T.); +#186559 = LINE('',#186560,#186561); +#186560 = CARTESIAN_POINT('',(110.59665,-89.6931,1.585)); +#186561 = VECTOR('',#186562,1.); +#186562 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#186563 = PLANE('',#186564); +#186564 = AXIS2_PLACEMENT_3D('',#186565,#186566,#186567); +#186565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186566 = DIRECTION('',(0.,0.,1.)); +#186567 = DIRECTION('',(1.,0.,-0.)); +#186568 = SHELL_BASED_SURFACE_MODEL('',(#186569)); +#186569 = OPEN_SHELL('',(#186570)); +#186570 = ADVANCED_FACE('',(#186571),#186607,.T.); +#186571 = FACE_BOUND('',#186572,.F.); +#186572 = EDGE_LOOP('',(#186573,#186584,#186592,#186601)); +#186573 = ORIENTED_EDGE('',*,*,#186574,.T.); +#186574 = EDGE_CURVE('',#186575,#186577,#186579,.T.); +#186575 = VERTEX_POINT('',#186576); +#186576 = CARTESIAN_POINT('',(99.464586,-89.2931,1.585)); +#186577 = VERTEX_POINT('',#186578); +#186578 = CARTESIAN_POINT('',(99.464586,-89.1731,1.585)); +#186579 = CIRCLE('',#186580,6.000000000042E-02); +#186580 = AXIS2_PLACEMENT_3D('',#186581,#186582,#186583); +#186581 = CARTESIAN_POINT('',(99.464585774412,-89.2331,1.585)); +#186582 = DIRECTION('',(0.,0.,-1.)); +#186583 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#186584 = ORIENTED_EDGE('',*,*,#186585,.T.); +#186585 = EDGE_CURVE('',#186577,#186586,#186588,.T.); +#186586 = VERTEX_POINT('',#186587); +#186587 = CARTESIAN_POINT('',(100.918714,-89.1731,1.585)); +#186588 = LINE('',#186589,#186590); +#186589 = CARTESIAN_POINT('',(99.464586,-89.1731,1.585)); +#186590 = VECTOR('',#186591,1.); +#186591 = DIRECTION('',(1.,0.,0.)); +#186592 = ORIENTED_EDGE('',*,*,#186593,.T.); +#186593 = EDGE_CURVE('',#186586,#186594,#186596,.T.); +#186594 = VERTEX_POINT('',#186595); +#186595 = CARTESIAN_POINT('',(100.918714,-89.2931,1.585)); +#186596 = CIRCLE('',#186597,6.000000000042E-02); +#186597 = AXIS2_PLACEMENT_3D('',#186598,#186599,#186600); +#186598 = CARTESIAN_POINT('',(100.91871422558,-89.2331,1.585)); +#186599 = DIRECTION('',(0.,0.,-1.)); +#186600 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#186601 = ORIENTED_EDGE('',*,*,#186602,.T.); +#186602 = EDGE_CURVE('',#186594,#186575,#186603,.T.); +#186603 = LINE('',#186604,#186605); +#186604 = CARTESIAN_POINT('',(100.918714,-89.2931,1.585)); +#186605 = VECTOR('',#186606,1.); +#186606 = DIRECTION('',(-1.,0.,0.)); +#186607 = PLANE('',#186608); +#186608 = AXIS2_PLACEMENT_3D('',#186609,#186610,#186611); +#186609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186610 = DIRECTION('',(0.,0.,1.)); +#186611 = DIRECTION('',(1.,0.,-0.)); +#186612 = SHELL_BASED_SURFACE_MODEL('',(#186613)); +#186613 = OPEN_SHELL('',(#186614)); +#186614 = ADVANCED_FACE('',(#186615,#186741,#186808),#186860,.T.); +#186615 = FACE_BOUND('',#186616,.F.); +#186616 = EDGE_LOOP('',(#186617,#186628,#186636,#186644,#186652,#186660, + #186669,#186677,#186685,#186694,#186702,#186710,#186718,#186726, + #186735)); +#186617 = ORIENTED_EDGE('',*,*,#186618,.T.); +#186618 = EDGE_CURVE('',#186619,#186621,#186623,.T.); +#186619 = VERTEX_POINT('',#186620); +#186620 = CARTESIAN_POINT('',(171.242142,-88.309597,1.585)); +#186621 = VERTEX_POINT('',#186622); +#186622 = CARTESIAN_POINT('',(171.307142,-88.244597,1.585)); +#186623 = CIRCLE('',#186624,6.500103935382E-02); +#186624 = AXIS2_PLACEMENT_3D('',#186625,#186626,#186627); +#186625 = CARTESIAN_POINT('',(171.30714303934,-88.30959803934,1.585)); +#186626 = DIRECTION('',(0.,0.,-1.)); +#186627 = DIRECTION('',(-0.999999999872,1.598967539909E-05,0.)); +#186628 = ORIENTED_EDGE('',*,*,#186629,.T.); +#186629 = EDGE_CURVE('',#186621,#186630,#186632,.T.); +#186630 = VERTEX_POINT('',#186631); +#186631 = CARTESIAN_POINT('',(171.610335,-88.245232,1.585)); +#186632 = LINE('',#186633,#186634); +#186633 = CARTESIAN_POINT('',(171.307142,-88.244597,1.585)); +#186634 = VECTOR('',#186635,1.); +#186635 = DIRECTION('',(0.999997806803,-2.094370936408E-03,0.)); +#186636 = ORIENTED_EDGE('',*,*,#186637,.T.); +#186637 = EDGE_CURVE('',#186630,#186638,#186640,.T.); +#186638 = VERTEX_POINT('',#186639); +#186639 = CARTESIAN_POINT('',(171.636211,-88.251459,1.585)); +#186640 = LINE('',#186641,#186642); +#186641 = CARTESIAN_POINT('',(171.610335,-88.245232,1.585)); +#186642 = VECTOR('',#186643,1.); +#186643 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#186644 = ORIENTED_EDGE('',*,*,#186645,.T.); +#186645 = EDGE_CURVE('',#186638,#186646,#186648,.T.); +#186646 = VERTEX_POINT('',#186647); +#186647 = CARTESIAN_POINT('',(171.738819,-88.306492,1.585)); +#186648 = LINE('',#186649,#186650); +#186649 = CARTESIAN_POINT('',(171.636211,-88.251459,1.585)); +#186650 = VECTOR('',#186651,1.); +#186651 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#186652 = ORIENTED_EDGE('',*,*,#186653,.T.); +#186653 = EDGE_CURVE('',#186646,#186654,#186656,.T.); +#186654 = VERTEX_POINT('',#186655); +#186655 = CARTESIAN_POINT('',(171.793852,-88.366242,1.585)); +#186656 = LINE('',#186657,#186658); +#186657 = CARTESIAN_POINT('',(171.738819,-88.306492,1.585)); +#186658 = VECTOR('',#186659,1.); +#186659 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#186660 = ORIENTED_EDGE('',*,*,#186661,.T.); +#186661 = EDGE_CURVE('',#186654,#186662,#186664,.T.); +#186662 = VERTEX_POINT('',#186663); +#186663 = CARTESIAN_POINT('',(171.787465,-88.689751,1.585)); +#186664 = CIRCLE('',#186665,0.260195634991); +#186665 = AXIS2_PLACEMENT_3D('',#186666,#186667,#186668); +#186666 = CARTESIAN_POINT('',(171.5869163306,-88.52397404239,1.585)); +#186667 = DIRECTION('',(0.,0.,-1.)); +#186668 = DIRECTION('',(0.795307997401,0.606205566842,0.)); +#186669 = ORIENTED_EDGE('',*,*,#186670,.T.); +#186670 = EDGE_CURVE('',#186662,#186671,#186673,.T.); +#186671 = VERTEX_POINT('',#186672); +#186672 = CARTESIAN_POINT('',(171.760589,-88.720973,1.585)); +#186673 = LINE('',#186674,#186675); +#186674 = CARTESIAN_POINT('',(171.787465,-88.689751,1.585)); +#186675 = VECTOR('',#186676,1.); +#186676 = DIRECTION('',(-0.652389160842,-0.757884148677,0.)); +#186677 = ORIENTED_EDGE('',*,*,#186678,.T.); +#186678 = EDGE_CURVE('',#186671,#186679,#186681,.T.); +#186679 = VERTEX_POINT('',#186680); +#186680 = CARTESIAN_POINT('',(171.781676,-88.735063,1.585)); +#186681 = LINE('',#186682,#186683); +#186682 = CARTESIAN_POINT('',(171.760589,-88.720973,1.585)); +#186683 = VECTOR('',#186684,1.); +#186684 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#186685 = ORIENTED_EDGE('',*,*,#186686,.T.); +#186686 = EDGE_CURVE('',#186679,#186687,#186689,.T.); +#186687 = VERTEX_POINT('',#186688); +#186688 = CARTESIAN_POINT('',(171.883512,-89.052824,1.585)); +#186689 = CIRCLE('',#186690,0.311668456373); +#186690 = AXIS2_PLACEMENT_3D('',#186691,#186692,#186693); +#186691 = CARTESIAN_POINT('',(171.58190146242,-88.97428540872,1.585)); +#186692 = DIRECTION('',(0.,0.,-1.)); +#186693 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#186694 = ORIENTED_EDGE('',*,*,#186695,.T.); +#186695 = EDGE_CURVE('',#186687,#186696,#186698,.T.); +#186696 = VERTEX_POINT('',#186697); +#186697 = CARTESIAN_POINT('',(171.830321,-89.16118,1.585)); +#186698 = LINE('',#186699,#186700); +#186699 = CARTESIAN_POINT('',(171.883512,-89.052824,1.585)); +#186700 = VECTOR('',#186701,1.); +#186701 = DIRECTION('',(-0.440660203323,-0.897673986037,0.)); +#186702 = ORIENTED_EDGE('',*,*,#186703,.T.); +#186703 = EDGE_CURVE('',#186696,#186704,#186706,.T.); +#186704 = VERTEX_POINT('',#186705); +#186705 = CARTESIAN_POINT('',(171.773021,-89.218484,1.585)); +#186706 = LINE('',#186707,#186708); +#186707 = CARTESIAN_POINT('',(171.830321,-89.16118,1.585)); +#186708 = VECTOR('',#186709,1.); +#186709 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#186710 = ORIENTED_EDGE('',*,*,#186711,.T.); +#186711 = EDGE_CURVE('',#186704,#186712,#186714,.T.); +#186712 = VERTEX_POINT('',#186713); +#186713 = CARTESIAN_POINT('',(171.664655,-89.271681,1.585)); +#186714 = LINE('',#186715,#186716); +#186715 = CARTESIAN_POINT('',(171.773021,-89.218484,1.585)); +#186716 = VECTOR('',#186717,1.); +#186717 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#186718 = ORIENTED_EDGE('',*,*,#186719,.T.); +#186719 = EDGE_CURVE('',#186712,#186720,#186722,.T.); +#186720 = VERTEX_POINT('',#186721); +#186721 = CARTESIAN_POINT('',(171.307142,-89.274597,1.585)); +#186722 = LINE('',#186723,#186724); +#186723 = CARTESIAN_POINT('',(171.664655,-89.271681,1.585)); +#186724 = VECTOR('',#186725,1.); +#186725 = DIRECTION('',(-0.999966738663,-8.156075471217E-03,0.)); +#186726 = ORIENTED_EDGE('',*,*,#186727,.T.); +#186727 = EDGE_CURVE('',#186720,#186728,#186730,.T.); +#186728 = VERTEX_POINT('',#186729); +#186729 = CARTESIAN_POINT('',(171.242142,-89.209597,1.585)); +#186730 = CIRCLE('',#186731,6.500103935387E-02); +#186731 = AXIS2_PLACEMENT_3D('',#186732,#186733,#186734); +#186732 = CARTESIAN_POINT('',(171.30714303934,-89.20959596065,1.585)); +#186733 = DIRECTION('',(0.,0.,-1.)); +#186734 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#186735 = ORIENTED_EDGE('',*,*,#186736,.T.); +#186736 = EDGE_CURVE('',#186728,#186619,#186737,.T.); +#186737 = LINE('',#186738,#186739); +#186738 = CARTESIAN_POINT('',(171.242142,-89.209597,1.585)); +#186739 = VECTOR('',#186740,1.); +#186740 = DIRECTION('',(0.,1.,0.)); +#186741 = FACE_BOUND('',#186742,.F.); +#186742 = EDGE_LOOP('',(#186743,#186753,#186761,#186769,#186777,#186786, + #186794,#186802)); +#186743 = ORIENTED_EDGE('',*,*,#186744,.T.); +#186744 = EDGE_CURVE('',#186745,#186747,#186749,.T.); +#186745 = VERTEX_POINT('',#186746); +#186746 = CARTESIAN_POINT('',(171.700602,-88.837837,1.585)); +#186747 = VERTEX_POINT('',#186748); +#186748 = CARTESIAN_POINT('',(171.596595,-88.803168,1.585)); +#186749 = LINE('',#186750,#186751); +#186750 = CARTESIAN_POINT('',(171.700602,-88.837837,1.585)); +#186751 = VECTOR('',#186752,1.); +#186752 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#186753 = ORIENTED_EDGE('',*,*,#186754,.T.); +#186754 = EDGE_CURVE('',#186747,#186755,#186757,.T.); +#186755 = VERTEX_POINT('',#186756); +#186756 = CARTESIAN_POINT('',(171.372142,-88.803168,1.585)); +#186757 = LINE('',#186758,#186759); +#186758 = CARTESIAN_POINT('',(171.596595,-88.803168,1.585)); +#186759 = VECTOR('',#186760,1.); +#186760 = DIRECTION('',(-1.,0.,0.)); +#186761 = ORIENTED_EDGE('',*,*,#186762,.T.); +#186762 = EDGE_CURVE('',#186755,#186763,#186765,.T.); +#186763 = VERTEX_POINT('',#186764); +#186764 = CARTESIAN_POINT('',(171.372142,-89.144597,1.585)); +#186765 = LINE('',#186766,#186767); +#186766 = CARTESIAN_POINT('',(171.372142,-88.803168,1.585)); +#186767 = VECTOR('',#186768,1.); +#186768 = DIRECTION('',(0.,-1.,0.)); +#186769 = ORIENTED_EDGE('',*,*,#186770,.T.); +#186770 = EDGE_CURVE('',#186763,#186771,#186773,.T.); +#186771 = VERTEX_POINT('',#186772); +#186772 = CARTESIAN_POINT('',(171.634654,-89.144597,1.585)); +#186773 = LINE('',#186774,#186775); +#186774 = CARTESIAN_POINT('',(171.372142,-89.144597,1.585)); +#186775 = VECTOR('',#186776,1.); +#186776 = DIRECTION('',(1.,0.,0.)); +#186777 = ORIENTED_EDGE('',*,*,#186778,.T.); +#186778 = EDGE_CURVE('',#186771,#186779,#186781,.T.); +#186779 = VERTEX_POINT('',#186780); +#186780 = CARTESIAN_POINT('',(171.756428,-89.022823,1.585)); +#186781 = CIRCLE('',#186782,0.170996196456); +#186782 = AXIS2_PLACEMENT_3D('',#186783,#186784,#186785); +#186783 = CARTESIAN_POINT('',(171.5910775,-88.9792465,1.585)); +#186784 = DIRECTION('',(0.,0.,1.)); +#186785 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#186786 = ORIENTED_EDGE('',*,*,#186787,.T.); +#186787 = EDGE_CURVE('',#186779,#186788,#186790,.T.); +#186788 = VERTEX_POINT('',#186789); +#186789 = CARTESIAN_POINT('',(171.756428,-88.924941,1.585)); +#186790 = LINE('',#186791,#186792); +#186791 = CARTESIAN_POINT('',(171.756428,-89.022823,1.585)); +#186792 = VECTOR('',#186793,1.); +#186793 = DIRECTION('',(0.,1.,0.)); +#186794 = ORIENTED_EDGE('',*,*,#186795,.T.); +#186795 = EDGE_CURVE('',#186788,#186796,#186798,.T.); +#186796 = VERTEX_POINT('',#186797); +#186797 = CARTESIAN_POINT('',(171.725149,-88.862384,1.585)); +#186798 = LINE('',#186799,#186800); +#186799 = CARTESIAN_POINT('',(171.756428,-88.924941,1.585)); +#186800 = VECTOR('',#186801,1.); +#186801 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#186802 = ORIENTED_EDGE('',*,*,#186803,.T.); +#186803 = EDGE_CURVE('',#186796,#186745,#186804,.T.); +#186804 = LINE('',#186805,#186806); +#186805 = CARTESIAN_POINT('',(171.725149,-88.862384,1.585)); +#186806 = VECTOR('',#186807,1.); +#186807 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#186808 = FACE_BOUND('',#186809,.F.); +#186809 = EDGE_LOOP('',(#186810,#186821,#186829,#186837,#186845,#186854) + ); +#186810 = ORIENTED_EDGE('',*,*,#186811,.T.); +#186811 = EDGE_CURVE('',#186812,#186814,#186816,.T.); +#186812 = VERTEX_POINT('',#186813); +#186813 = CARTESIAN_POINT('',(171.713571,-88.49637,1.585)); +#186814 = VERTEX_POINT('',#186815); +#186815 = CARTESIAN_POINT('',(171.591797,-88.374597,1.585)); +#186816 = CIRCLE('',#186817,0.170996278941); +#186817 = AXIS2_PLACEMENT_3D('',#186818,#186819,#186820); +#186818 = CARTESIAN_POINT('',(171.5482207157,-88.53994764214,1.585)); +#186819 = DIRECTION('',(0.,0.,1.)); +#186820 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#186821 = ORIENTED_EDGE('',*,*,#186822,.T.); +#186822 = EDGE_CURVE('',#186814,#186823,#186825,.T.); +#186823 = VERTEX_POINT('',#186824); +#186824 = CARTESIAN_POINT('',(171.372142,-88.374597,1.585)); +#186825 = LINE('',#186826,#186827); +#186826 = CARTESIAN_POINT('',(171.591797,-88.374597,1.585)); +#186827 = VECTOR('',#186828,1.); +#186828 = DIRECTION('',(-1.,0.,0.)); +#186829 = ORIENTED_EDGE('',*,*,#186830,.T.); +#186830 = EDGE_CURVE('',#186823,#186831,#186833,.T.); +#186831 = VERTEX_POINT('',#186832); +#186832 = CARTESIAN_POINT('',(171.372142,-88.673168,1.585)); +#186833 = LINE('',#186834,#186835); +#186834 = CARTESIAN_POINT('',(171.372142,-88.374597,1.585)); +#186835 = VECTOR('',#186836,1.); +#186836 = DIRECTION('',(0.,-1.,0.)); +#186837 = ORIENTED_EDGE('',*,*,#186838,.T.); +#186838 = EDGE_CURVE('',#186831,#186839,#186841,.T.); +#186839 = VERTEX_POINT('',#186840); +#186840 = CARTESIAN_POINT('',(171.591797,-88.673168,1.585)); +#186841 = LINE('',#186842,#186843); +#186842 = CARTESIAN_POINT('',(171.372142,-88.673168,1.585)); +#186843 = VECTOR('',#186844,1.); +#186844 = DIRECTION('',(1.,0.,0.)); +#186845 = ORIENTED_EDGE('',*,*,#186846,.T.); +#186846 = EDGE_CURVE('',#186839,#186847,#186849,.T.); +#186847 = VERTEX_POINT('',#186848); +#186848 = CARTESIAN_POINT('',(171.713571,-88.551395,1.585)); +#186849 = CIRCLE('',#186850,0.171001125777); +#186850 = AXIS2_PLACEMENT_3D('',#186851,#186852,#186853); +#186851 = CARTESIAN_POINT('',(171.54821674885,-88.50781339097,1.585)); +#186852 = DIRECTION('',(0.,0.,1.)); +#186853 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#186854 = ORIENTED_EDGE('',*,*,#186855,.T.); +#186855 = EDGE_CURVE('',#186847,#186812,#186856,.T.); +#186856 = LINE('',#186857,#186858); +#186857 = CARTESIAN_POINT('',(171.713571,-88.551395,1.585)); +#186858 = VECTOR('',#186859,1.); +#186859 = DIRECTION('',(0.,1.,0.)); +#186860 = PLANE('',#186861); +#186861 = AXIS2_PLACEMENT_3D('',#186862,#186863,#186864); +#186862 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186863 = DIRECTION('',(0.,0.,1.)); +#186864 = DIRECTION('',(1.,0.,-0.)); +#186865 = SHELL_BASED_SURFACE_MODEL('',(#186866)); +#186866 = OPEN_SHELL('',(#186867)); +#186867 = ADVANCED_FACE('',(#186868),#187132,.T.); +#186868 = FACE_BOUND('',#186869,.F.); +#186869 = EDGE_LOOP('',(#186870,#186880,#186888,#186896,#186905,#186913, + #186921,#186930,#186938,#186946,#186954,#186962,#186970,#186978, + #186986,#186995,#187003,#187011,#187019,#187027,#187036,#187044, + #187052,#187061,#187069,#187077,#187085,#187093,#187101,#187109, + #187117,#187126)); +#186870 = ORIENTED_EDGE('',*,*,#186871,.T.); +#186871 = EDGE_CURVE('',#186872,#186874,#186876,.T.); +#186872 = VERTEX_POINT('',#186873); +#186873 = CARTESIAN_POINT('',(170.455558,-88.300702,1.585)); +#186874 = VERTEX_POINT('',#186875); +#186875 = CARTESIAN_POINT('',(170.563914,-88.247512,1.585)); +#186876 = LINE('',#186877,#186878); +#186877 = CARTESIAN_POINT('',(170.455558,-88.300702,1.585)); +#186878 = VECTOR('',#186879,1.); +#186879 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#186880 = ORIENTED_EDGE('',*,*,#186881,.T.); +#186881 = EDGE_CURVE('',#186874,#186882,#186884,.T.); +#186882 = VERTEX_POINT('',#186883); +#186883 = CARTESIAN_POINT('',(170.803078,-88.24663,1.585)); +#186884 = LINE('',#186885,#186886); +#186885 = CARTESIAN_POINT('',(170.563914,-88.247512,1.585)); +#186886 = VECTOR('',#186887,1.); +#186887 = DIRECTION('',(0.999993199965,3.687820919426E-03,0.)); +#186888 = ORIENTED_EDGE('',*,*,#186889,.T.); +#186889 = EDGE_CURVE('',#186882,#186890,#186892,.T.); +#186890 = VERTEX_POINT('',#186891); +#186891 = CARTESIAN_POINT('',(170.941983,-88.29079,1.585)); +#186892 = LINE('',#186893,#186894); +#186893 = CARTESIAN_POINT('',(170.803078,-88.24663,1.585)); +#186894 = VECTOR('',#186895,1.); +#186895 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#186896 = ORIENTED_EDGE('',*,*,#186897,.T.); +#186897 = EDGE_CURVE('',#186890,#186898,#186900,.T.); +#186898 = VERTEX_POINT('',#186899); +#186899 = CARTESIAN_POINT('',(170.900874,-88.414119,1.585)); +#186900 = CIRCLE('',#186901,6.499998485858E-02); +#186901 = AXIS2_PLACEMENT_3D('',#186902,#186903,#186904); +#186902 = CARTESIAN_POINT('',(170.92142749751,-88.35245416584,1.585)); +#186903 = DIRECTION('',(0.,0.,-1.)); +#186904 = DIRECTION('',(0.316238573437,0.948679695509,0.)); +#186905 = ORIENTED_EDGE('',*,*,#186906,.T.); +#186906 = EDGE_CURVE('',#186898,#186907,#186909,.T.); +#186907 = VERTEX_POINT('',#186908); +#186908 = CARTESIAN_POINT('',(170.782309,-88.374597,1.585)); +#186909 = LINE('',#186910,#186911); +#186910 = CARTESIAN_POINT('',(170.900874,-88.414119,1.585)); +#186911 = VECTOR('',#186912,1.); +#186912 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#186913 = ORIENTED_EDGE('',*,*,#186914,.T.); +#186914 = EDGE_CURVE('',#186907,#186915,#186917,.T.); +#186915 = VERTEX_POINT('',#186916); +#186916 = CARTESIAN_POINT('',(170.593916,-88.374597,1.585)); +#186917 = LINE('',#186918,#186919); +#186918 = CARTESIAN_POINT('',(170.782309,-88.374597,1.585)); +#186919 = VECTOR('',#186920,1.); +#186920 = DIRECTION('',(-1.,0.,0.)); +#186921 = ORIENTED_EDGE('',*,*,#186922,.T.); +#186922 = EDGE_CURVE('',#186915,#186923,#186925,.T.); +#186923 = VERTEX_POINT('',#186924); +#186924 = CARTESIAN_POINT('',(170.472142,-88.49637,1.585)); +#186925 = CIRCLE('',#186926,0.170991742693); +#186926 = AXIS2_PLACEMENT_3D('',#186927,#186928,#186929); +#186927 = CARTESIAN_POINT('',(170.63748857161,-88.53994392943,1.585)); +#186928 = DIRECTION('',(0.,0.,1.)); +#186929 = DIRECTION('',(-0.254822665256,0.966987802028,0.)); +#186930 = ORIENTED_EDGE('',*,*,#186931,.T.); +#186931 = EDGE_CURVE('',#186923,#186932,#186934,.T.); +#186932 = VERTEX_POINT('',#186933); +#186933 = CARTESIAN_POINT('',(170.472142,-88.551395,1.585)); +#186934 = LINE('',#186935,#186936); +#186935 = CARTESIAN_POINT('',(170.472142,-88.49637,1.585)); +#186936 = VECTOR('',#186937,1.); +#186937 = DIRECTION('',(0.,-1.,0.)); +#186938 = ORIENTED_EDGE('',*,*,#186939,.T.); +#186939 = EDGE_CURVE('',#186932,#186940,#186942,.T.); +#186940 = VERTEX_POINT('',#186941); +#186941 = CARTESIAN_POINT('',(170.50342,-88.613951,1.585)); +#186942 = LINE('',#186943,#186944); +#186943 = CARTESIAN_POINT('',(170.472142,-88.551395,1.585)); +#186944 = VECTOR('',#186945,1.); +#186945 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#186946 = ORIENTED_EDGE('',*,*,#186947,.T.); +#186947 = EDGE_CURVE('',#186940,#186948,#186950,.T.); +#186948 = VERTEX_POINT('',#186949); +#186949 = CARTESIAN_POINT('',(170.531358,-88.641889,1.585)); +#186950 = LINE('',#186951,#186952); +#186951 = CARTESIAN_POINT('',(170.50342,-88.613951,1.585)); +#186952 = VECTOR('',#186953,1.); +#186953 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#186954 = ORIENTED_EDGE('',*,*,#186955,.T.); +#186955 = EDGE_CURVE('',#186948,#186956,#186958,.T.); +#186956 = VERTEX_POINT('',#186957); +#186957 = CARTESIAN_POINT('',(170.601259,-88.676839,1.585)); +#186958 = LINE('',#186959,#186960); +#186959 = CARTESIAN_POINT('',(170.531358,-88.641889,1.585)); +#186960 = VECTOR('',#186961,1.); +#186961 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#186962 = ORIENTED_EDGE('',*,*,#186963,.T.); +#186963 = EDGE_CURVE('',#186956,#186964,#186966,.T.); +#186964 = VERTEX_POINT('',#186965); +#186965 = CARTESIAN_POINT('',(170.779068,-88.722887,1.585)); +#186966 = LINE('',#186967,#186968); +#186967 = CARTESIAN_POINT('',(170.601259,-88.676839,1.585)); +#186968 = VECTOR('',#186969,1.); +#186969 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#186970 = ORIENTED_EDGE('',*,*,#186971,.T.); +#186971 = EDGE_CURVE('',#186964,#186972,#186974,.T.); +#186972 = VERTEX_POINT('',#186973); +#186973 = CARTESIAN_POINT('',(170.881676,-88.777921,1.585)); +#186974 = LINE('',#186975,#186976); +#186975 = CARTESIAN_POINT('',(170.779068,-88.722887,1.585)); +#186976 = VECTOR('',#186977,1.); +#186977 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#186978 = ORIENTED_EDGE('',*,*,#186979,.T.); +#186979 = EDGE_CURVE('',#186972,#186980,#186982,.T.); +#186980 = VERTEX_POINT('',#186981); +#186981 = CARTESIAN_POINT('',(170.936709,-88.837671,1.585)); +#186982 = LINE('',#186983,#186984); +#186983 = CARTESIAN_POINT('',(170.881676,-88.777921,1.585)); +#186984 = VECTOR('',#186985,1.); +#186985 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#186986 = ORIENTED_EDGE('',*,*,#186987,.T.); +#186987 = EDGE_CURVE('',#186980,#186988,#186990,.T.); +#186988 = VERTEX_POINT('',#186989); +#186989 = CARTESIAN_POINT('',(170.930321,-89.16118,1.585)); +#186990 = CIRCLE('',#186991,0.260194262446); +#186991 = AXIS2_PLACEMENT_3D('',#186992,#186993,#186994); +#186992 = CARTESIAN_POINT('',(170.72977460304,-88.99540244761,1.585)); +#186993 = DIRECTION('',(0.,0.,-1.)); +#186994 = DIRECTION('',(0.795307302373,0.606206478678,0.)); +#186995 = ORIENTED_EDGE('',*,*,#186996,.T.); +#186996 = EDGE_CURVE('',#186988,#186997,#186999,.T.); +#186997 = VERTEX_POINT('',#186998); +#186998 = CARTESIAN_POINT('',(170.873021,-89.218484,1.585)); +#186999 = LINE('',#187000,#187001); +#187000 = CARTESIAN_POINT('',(170.930321,-89.16118,1.585)); +#187001 = VECTOR('',#187002,1.); +#187002 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#187003 = ORIENTED_EDGE('',*,*,#187004,.T.); +#187004 = EDGE_CURVE('',#186997,#187005,#187007,.T.); +#187005 = VERTEX_POINT('',#187006); +#187006 = CARTESIAN_POINT('',(170.764655,-89.271681,1.585)); +#187007 = LINE('',#187008,#187009); +#187008 = CARTESIAN_POINT('',(170.873021,-89.218484,1.585)); +#187009 = VECTOR('',#187010,1.); +#187010 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#187011 = ORIENTED_EDGE('',*,*,#187012,.T.); +#187012 = EDGE_CURVE('',#187005,#187013,#187015,.T.); +#187013 = VERTEX_POINT('',#187014); +#187014 = CARTESIAN_POINT('',(170.525498,-89.272564,1.585)); +#187015 = LINE('',#187016,#187017); +#187016 = CARTESIAN_POINT('',(170.764655,-89.271681,1.585)); +#187017 = VECTOR('',#187018,1.); +#187018 = DIRECTION('',(-0.999993184138,-3.692110126803E-03,0.)); +#187019 = ORIENTED_EDGE('',*,*,#187020,.T.); +#187020 = EDGE_CURVE('',#187013,#187021,#187023,.T.); +#187021 = VERTEX_POINT('',#187022); +#187022 = CARTESIAN_POINT('',(170.386587,-89.228404,1.585)); +#187023 = LINE('',#187024,#187025); +#187024 = CARTESIAN_POINT('',(170.525498,-89.272564,1.585)); +#187025 = VECTOR('',#187026,1.); +#187026 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#187027 = ORIENTED_EDGE('',*,*,#187028,.T.); +#187028 = EDGE_CURVE('',#187021,#187029,#187031,.T.); +#187029 = VERTEX_POINT('',#187030); +#187030 = CARTESIAN_POINT('',(170.427697,-89.105076,1.585)); +#187031 = CIRCLE('',#187032,6.499966862237E-02); +#187032 = AXIS2_PLACEMENT_3D('',#187033,#187034,#187035); +#187033 = CARTESIAN_POINT('',(170.40714212923,-89.16674004307,1.585)); +#187034 = DIRECTION('',(0.,0.,-1.)); +#187035 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#187036 = ORIENTED_EDGE('',*,*,#187037,.T.); +#187037 = EDGE_CURVE('',#187029,#187038,#187040,.T.); +#187038 = VERTEX_POINT('',#187039); +#187039 = CARTESIAN_POINT('',(170.546261,-89.144597,1.585)); +#187040 = LINE('',#187041,#187042); +#187041 = CARTESIAN_POINT('',(170.427697,-89.105076,1.585)); +#187042 = VECTOR('',#187043,1.); +#187043 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#187044 = ORIENTED_EDGE('',*,*,#187045,.T.); +#187045 = EDGE_CURVE('',#187038,#187046,#187048,.T.); +#187046 = VERTEX_POINT('',#187047); +#187047 = CARTESIAN_POINT('',(170.734654,-89.144597,1.585)); +#187048 = LINE('',#187049,#187050); +#187049 = CARTESIAN_POINT('',(170.546261,-89.144597,1.585)); +#187050 = VECTOR('',#187051,1.); +#187051 = DIRECTION('',(1.,0.,0.)); +#187052 = ORIENTED_EDGE('',*,*,#187053,.T.); +#187053 = EDGE_CURVE('',#187046,#187054,#187056,.T.); +#187054 = VERTEX_POINT('',#187055); +#187055 = CARTESIAN_POINT('',(170.856428,-89.022823,1.585)); +#187056 = CIRCLE('',#187057,0.170996196456); +#187057 = AXIS2_PLACEMENT_3D('',#187058,#187059,#187060); +#187058 = CARTESIAN_POINT('',(170.6910775,-88.9792465,1.585)); +#187059 = DIRECTION('',(0.,0.,1.)); +#187060 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#187061 = ORIENTED_EDGE('',*,*,#187062,.T.); +#187062 = EDGE_CURVE('',#187054,#187063,#187065,.T.); +#187063 = VERTEX_POINT('',#187064); +#187064 = CARTESIAN_POINT('',(170.856428,-88.967799,1.585)); +#187065 = LINE('',#187066,#187067); +#187066 = CARTESIAN_POINT('',(170.856428,-89.022823,1.585)); +#187067 = VECTOR('',#187068,1.); +#187068 = DIRECTION('',(0.,1.,0.)); +#187069 = ORIENTED_EDGE('',*,*,#187070,.T.); +#187070 = EDGE_CURVE('',#187063,#187071,#187073,.T.); +#187071 = VERTEX_POINT('',#187072); +#187072 = CARTESIAN_POINT('',(170.825149,-88.905242,1.585)); +#187073 = LINE('',#187074,#187075); +#187074 = CARTESIAN_POINT('',(170.856428,-88.967799,1.585)); +#187075 = VECTOR('',#187076,1.); +#187076 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#187077 = ORIENTED_EDGE('',*,*,#187078,.T.); +#187078 = EDGE_CURVE('',#187071,#187079,#187081,.T.); +#187079 = VERTEX_POINT('',#187080); +#187080 = CARTESIAN_POINT('',(170.797212,-88.877303,1.585)); +#187081 = LINE('',#187082,#187083); +#187082 = CARTESIAN_POINT('',(170.825149,-88.905242,1.585)); +#187083 = VECTOR('',#187084,1.); +#187084 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#187085 = ORIENTED_EDGE('',*,*,#187086,.T.); +#187086 = EDGE_CURVE('',#187079,#187087,#187089,.T.); +#187087 = VERTEX_POINT('',#187088); +#187088 = CARTESIAN_POINT('',(170.72731,-88.842353,1.585)); +#187089 = LINE('',#187090,#187091); +#187090 = CARTESIAN_POINT('',(170.797212,-88.877303,1.585)); +#187091 = VECTOR('',#187092,1.); +#187092 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#187093 = ORIENTED_EDGE('',*,*,#187094,.T.); +#187094 = EDGE_CURVE('',#187087,#187095,#187097,.T.); +#187095 = VERTEX_POINT('',#187096); +#187096 = CARTESIAN_POINT('',(170.549502,-88.796306,1.585)); +#187097 = LINE('',#187098,#187099); +#187098 = CARTESIAN_POINT('',(170.72731,-88.842353,1.585)); +#187099 = VECTOR('',#187100,1.); +#187100 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#187101 = ORIENTED_EDGE('',*,*,#187102,.T.); +#187102 = EDGE_CURVE('',#187095,#187103,#187105,.T.); +#187103 = VERTEX_POINT('',#187104); +#187104 = CARTESIAN_POINT('',(170.446894,-88.741273,1.585)); +#187105 = LINE('',#187106,#187107); +#187106 = CARTESIAN_POINT('',(170.549502,-88.796306,1.585)); +#187107 = VECTOR('',#187108,1.); +#187108 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#187109 = ORIENTED_EDGE('',*,*,#187110,.T.); +#187110 = EDGE_CURVE('',#187103,#187111,#187113,.T.); +#187111 = VERTEX_POINT('',#187112); +#187112 = CARTESIAN_POINT('',(170.391861,-88.681523,1.585)); +#187113 = LINE('',#187114,#187115); +#187114 = CARTESIAN_POINT('',(170.446894,-88.741273,1.585)); +#187115 = VECTOR('',#187116,1.); +#187116 = DIRECTION('',(-0.677476455829,0.73554445943,0.)); +#187117 = ORIENTED_EDGE('',*,*,#187118,.T.); +#187118 = EDGE_CURVE('',#187111,#187119,#187121,.T.); +#187119 = VERTEX_POINT('',#187120); +#187120 = CARTESIAN_POINT('',(170.398247,-88.358013,1.585)); +#187121 = CIRCLE('',#187122,0.260194992516); +#187122 = AXIS2_PLACEMENT_3D('',#187123,#187124,#187125); +#187123 = CARTESIAN_POINT('',(170.59879497292,-88.52378979176,1.585)); +#187124 = DIRECTION('',(0.,0.,-1.)); +#187125 = DIRECTION('',(-0.795303441168,-0.606211544319,-0.)); +#187126 = ORIENTED_EDGE('',*,*,#187127,.T.); +#187127 = EDGE_CURVE('',#187119,#186872,#187128,.T.); +#187128 = LINE('',#187129,#187130); +#187129 = CARTESIAN_POINT('',(170.398247,-88.358013,1.585)); +#187130 = VECTOR('',#187131,1.); +#187131 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#187132 = PLANE('',#187133); +#187133 = AXIS2_PLACEMENT_3D('',#187134,#187135,#187136); +#187134 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187135 = DIRECTION('',(0.,0.,1.)); +#187136 = DIRECTION('',(1.,0.,-0.)); +#187137 = SHELL_BASED_SURFACE_MODEL('',(#187138)); +#187138 = OPEN_SHELL('',(#187139)); +#187139 = ADVANCED_FACE('',(#187140),#187252,.T.); +#187140 = FACE_BOUND('',#187141,.F.); +#187141 = EDGE_LOOP('',(#187142,#187153,#187161,#187170,#187178,#187187, + #187195,#187204,#187212,#187221,#187229,#187238,#187246)); +#187142 = ORIENTED_EDGE('',*,*,#187143,.T.); +#187143 = EDGE_CURVE('',#187144,#187146,#187148,.T.); +#187144 = VERTEX_POINT('',#187145); +#187145 = CARTESIAN_POINT('',(169.44709,-88.284723,1.585)); +#187146 = VERTEX_POINT('',#187147); +#187147 = CARTESIAN_POINT('',(169.572142,-88.309597,1.585)); +#187148 = CIRCLE('',#187149,6.499988811649E-02); +#187149 = AXIS2_PLACEMENT_3D('',#187150,#187151,#187152); +#187150 = CARTESIAN_POINT('',(169.50714211188,-88.3095972701,1.585)); +#187151 = DIRECTION('',(0.,0.,-1.)); +#187152 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#187153 = ORIENTED_EDGE('',*,*,#187154,.T.); +#187154 = EDGE_CURVE('',#187146,#187155,#187157,.T.); +#187155 = VERTEX_POINT('',#187156); +#187156 = CARTESIAN_POINT('',(169.572142,-89.022823,1.585)); +#187157 = LINE('',#187158,#187159); +#187158 = CARTESIAN_POINT('',(169.572142,-88.309597,1.585)); +#187159 = VECTOR('',#187160,1.); +#187160 = DIRECTION('',(0.,-1.,0.)); +#187161 = ORIENTED_EDGE('',*,*,#187162,.T.); +#187162 = EDGE_CURVE('',#187155,#187163,#187165,.T.); +#187163 = VERTEX_POINT('',#187164); +#187164 = CARTESIAN_POINT('',(169.693916,-89.144597,1.585)); +#187165 = CIRCLE('',#187166,0.170999251022); +#187166 = AXIS2_PLACEMENT_3D('',#187167,#187168,#187169); +#187167 = CARTESIAN_POINT('',(169.737495,-88.979244,1.585)); +#187168 = DIRECTION('',(0.,0.,1.)); +#187169 = DIRECTION('',(-0.966980843553,-0.254849069452,0.)); +#187170 = ORIENTED_EDGE('',*,*,#187171,.T.); +#187171 = EDGE_CURVE('',#187163,#187172,#187174,.T.); +#187172 = VERTEX_POINT('',#187173); +#187173 = CARTESIAN_POINT('',(169.834654,-89.144597,1.585)); +#187174 = LINE('',#187175,#187176); +#187175 = CARTESIAN_POINT('',(169.693916,-89.144597,1.585)); +#187176 = VECTOR('',#187177,1.); +#187177 = DIRECTION('',(1.,0.,0.)); +#187178 = ORIENTED_EDGE('',*,*,#187179,.T.); +#187179 = EDGE_CURVE('',#187172,#187180,#187182,.T.); +#187180 = VERTEX_POINT('',#187181); +#187181 = CARTESIAN_POINT('',(169.956428,-89.022823,1.585)); +#187182 = CIRCLE('',#187183,0.170996196456); +#187183 = AXIS2_PLACEMENT_3D('',#187184,#187185,#187186); +#187184 = CARTESIAN_POINT('',(169.7910775,-88.9792465,1.585)); +#187185 = DIRECTION('',(0.,0.,1.)); +#187186 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#187187 = ORIENTED_EDGE('',*,*,#187188,.T.); +#187188 = EDGE_CURVE('',#187180,#187189,#187191,.T.); +#187189 = VERTEX_POINT('',#187190); +#187190 = CARTESIAN_POINT('',(169.956428,-88.309597,1.585)); +#187191 = LINE('',#187192,#187193); +#187192 = CARTESIAN_POINT('',(169.956428,-89.022823,1.585)); +#187193 = VECTOR('',#187194,1.); +#187194 = DIRECTION('',(0.,1.,0.)); +#187195 = ORIENTED_EDGE('',*,*,#187196,.T.); +#187196 = EDGE_CURVE('',#187189,#187197,#187199,.T.); +#187197 = VERTEX_POINT('',#187198); +#187198 = CARTESIAN_POINT('',(170.086428,-88.309597,1.585)); +#187199 = CIRCLE('',#187200,6.500000000093E-02); +#187200 = AXIS2_PLACEMENT_3D('',#187201,#187202,#187203); +#187201 = CARTESIAN_POINT('',(170.021428,-88.30959734486,1.585)); +#187202 = DIRECTION('',(0.,0.,-1.)); +#187203 = DIRECTION('',(-0.999999999986,5.305658462923E-06,0.)); +#187204 = ORIENTED_EDGE('',*,*,#187205,.T.); +#187205 = EDGE_CURVE('',#187197,#187206,#187208,.T.); +#187206 = VERTEX_POINT('',#187207); +#187207 = CARTESIAN_POINT('',(170.083512,-89.052824,1.585)); +#187208 = LINE('',#187209,#187210); +#187209 = CARTESIAN_POINT('',(170.086428,-88.309597,1.585)); +#187210 = VECTOR('',#187211,1.); +#187211 = DIRECTION('',(-3.923401002397E-03,-0.999992303433,0.)); +#187212 = ORIENTED_EDGE('',*,*,#187213,.T.); +#187213 = EDGE_CURVE('',#187206,#187214,#187216,.T.); +#187214 = VERTEX_POINT('',#187215); +#187215 = CARTESIAN_POINT('',(169.864655,-89.271681,1.585)); +#187216 = CIRCLE('',#187217,0.308111908981); +#187217 = AXIS2_PLACEMENT_3D('',#187218,#187219,#187220); +#187218 = CARTESIAN_POINT('',(169.78569061898,-88.97385961898,1.585)); +#187219 = DIRECTION('',(0.,0.,-1.)); +#187220 = DIRECTION('',(0.966601330004,-0.256284741712,0.)); +#187221 = ORIENTED_EDGE('',*,*,#187222,.T.); +#187222 = EDGE_CURVE('',#187214,#187223,#187225,.T.); +#187223 = VERTEX_POINT('',#187224); +#187224 = CARTESIAN_POINT('',(169.663914,-89.271681,1.585)); +#187225 = LINE('',#187226,#187227); +#187226 = CARTESIAN_POINT('',(169.864655,-89.271681,1.585)); +#187227 = VECTOR('',#187228,1.); +#187228 = DIRECTION('',(-1.,0.,0.)); +#187229 = ORIENTED_EDGE('',*,*,#187230,.T.); +#187230 = EDGE_CURVE('',#187223,#187231,#187233,.T.); +#187231 = VERTEX_POINT('',#187232); +#187232 = CARTESIAN_POINT('',(169.445057,-89.052824,1.585)); +#187233 = CIRCLE('',#187234,0.308110297261); +#187234 = AXIS2_PLACEMENT_3D('',#187235,#187236,#187237); +#187235 = CARTESIAN_POINT('',(169.74287706304,-88.97386093695,1.585)); +#187236 = DIRECTION('',(0.,0.,-1.)); +#187237 = DIRECTION('',(-0.256281804756,-0.966602108704,-0.)); +#187238 = ORIENTED_EDGE('',*,*,#187239,.T.); +#187239 = EDGE_CURVE('',#187231,#187240,#187242,.T.); +#187240 = VERTEX_POINT('',#187241); +#187241 = CARTESIAN_POINT('',(169.442142,-88.309597,1.585)); +#187242 = LINE('',#187243,#187244); +#187243 = CARTESIAN_POINT('',(169.445057,-89.052824,1.585)); +#187244 = VECTOR('',#187245,1.); +#187245 = DIRECTION('',(-3.922055549506E-03,0.999992308711,0.)); +#187246 = ORIENTED_EDGE('',*,*,#187247,.T.); +#187247 = EDGE_CURVE('',#187240,#187144,#187248,.T.); +#187248 = LINE('',#187249,#187250); +#187249 = CARTESIAN_POINT('',(169.442142,-88.309597,1.585)); +#187250 = VECTOR('',#187251,1.); +#187251 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#187252 = PLANE('',#187253); +#187253 = AXIS2_PLACEMENT_3D('',#187254,#187255,#187256); +#187254 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187255 = DIRECTION('',(0.,0.,1.)); +#187256 = DIRECTION('',(1.,0.,-0.)); +#187257 = SHELL_BASED_SURFACE_MODEL('',(#187258)); +#187258 = OPEN_SHELL('',(#187259)); +#187259 = ADVANCED_FACE('',(#187260),#187419,.T.); +#187260 = FACE_BOUND('',#187261,.F.); +#187261 = EDGE_LOOP('',(#187262,#187273,#187281,#187289,#187297,#187305, + #187313,#187321,#187330,#187338,#187347,#187355,#187363,#187371, + #187380,#187388,#187396,#187404,#187413)); +#187262 = ORIENTED_EDGE('',*,*,#187263,.T.); +#187263 = EDGE_CURVE('',#187264,#187266,#187268,.T.); +#187264 = VERTEX_POINT('',#187265); +#187265 = CARTESIAN_POINT('',(142.000966,-87.958456,1.585)); +#187266 = VERTEX_POINT('',#187267); +#187267 = CARTESIAN_POINT('',(142.510361,-87.967786,1.585)); +#187268 = CIRCLE('',#187269,0.450326844012); +#187269 = AXIS2_PLACEMENT_3D('',#187270,#187271,#187272); +#187270 = CARTESIAN_POINT('',(142.2488630301,-88.33440989199,1.585)); +#187271 = DIRECTION('',(0.,0.,-1.)); +#187272 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#187273 = ORIENTED_EDGE('',*,*,#187274,.T.); +#187274 = EDGE_CURVE('',#187266,#187275,#187277,.T.); +#187275 = VERTEX_POINT('',#187276); +#187276 = CARTESIAN_POINT('',(142.573814,-88.033316,1.585)); +#187277 = LINE('',#187278,#187279); +#187278 = CARTESIAN_POINT('',(142.510361,-87.967786,1.585)); +#187279 = VECTOR('',#187280,1.); +#187280 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#187281 = ORIENTED_EDGE('',*,*,#187282,.T.); +#187282 = EDGE_CURVE('',#187275,#187283,#187285,.T.); +#187283 = VERTEX_POINT('',#187284); +#187284 = CARTESIAN_POINT('',(142.631875,-88.153763,1.585)); +#187285 = LINE('',#187286,#187287); +#187286 = CARTESIAN_POINT('',(142.573814,-88.033316,1.585)); +#187287 = VECTOR('',#187288,1.); +#187288 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#187289 = ORIENTED_EDGE('',*,*,#187290,.T.); +#187290 = EDGE_CURVE('',#187283,#187291,#187293,.T.); +#187291 = VERTEX_POINT('',#187292); +#187292 = CARTESIAN_POINT('',(142.631116,-88.280095,1.585)); +#187293 = LINE('',#187294,#187295); +#187294 = CARTESIAN_POINT('',(142.631875,-88.153763,1.585)); +#187295 = VECTOR('',#187296,1.); +#187296 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#187297 = ORIENTED_EDGE('',*,*,#187298,.T.); +#187298 = EDGE_CURVE('',#187291,#187299,#187301,.T.); +#187299 = VERTEX_POINT('',#187300); +#187300 = CARTESIAN_POINT('',(142.573058,-88.448158,1.585)); +#187301 = LINE('',#187302,#187303); +#187302 = CARTESIAN_POINT('',(142.631116,-88.280095,1.585)); +#187303 = VECTOR('',#187304,1.); +#187304 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#187305 = ORIENTED_EDGE('',*,*,#187306,.T.); +#187306 = EDGE_CURVE('',#187299,#187307,#187309,.T.); +#187307 = VERTEX_POINT('',#187308); +#187308 = CARTESIAN_POINT('',(142.120335,-88.902919,1.585)); +#187309 = LINE('',#187310,#187311); +#187310 = CARTESIAN_POINT('',(142.573058,-88.448158,1.585)); +#187311 = VECTOR('',#187312,1.); +#187312 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#187313 = ORIENTED_EDGE('',*,*,#187314,.T.); +#187314 = EDGE_CURVE('',#187307,#187315,#187317,.T.); +#187315 = VERTEX_POINT('',#187316); +#187316 = CARTESIAN_POINT('',(142.572948,-88.90436,1.585)); +#187317 = LINE('',#187318,#187319); +#187318 = CARTESIAN_POINT('',(142.120335,-88.902919,1.585)); +#187319 = VECTOR('',#187320,1.); +#187320 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#187321 = ORIENTED_EDGE('',*,*,#187322,.T.); +#187322 = EDGE_CURVE('',#187315,#187323,#187325,.T.); +#187323 = VERTEX_POINT('',#187324); +#187324 = CARTESIAN_POINT('',(142.558316,-89.052919,1.585)); +#187325 = CIRCLE('',#187326,7.500006711464E-02); +#187326 = AXIS2_PLACEMENT_3D('',#187327,#187328,#187329); +#187327 = CARTESIAN_POINT('',(142.55831606711,-88.97791893288,1.585)); +#187328 = DIRECTION('',(0.,0.,-1.)); +#187329 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#187330 = ORIENTED_EDGE('',*,*,#187331,.T.); +#187331 = EDGE_CURVE('',#187323,#187332,#187334,.T.); +#187332 = VERTEX_POINT('',#187333); +#187333 = CARTESIAN_POINT('',(141.924637,-89.051478,1.585)); +#187334 = LINE('',#187335,#187336); +#187335 = CARTESIAN_POINT('',(142.558316,-89.052919,1.585)); +#187336 = VECTOR('',#187337,1.); +#187337 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#187338 = ORIENTED_EDGE('',*,*,#187339,.T.); +#187339 = EDGE_CURVE('',#187332,#187340,#187342,.T.); +#187340 = VERTEX_POINT('',#187341); +#187341 = CARTESIAN_POINT('',(141.886236,-88.924886,1.585)); +#187342 = CIRCLE('',#187343,7.500021013112E-02); +#187343 = AXIS2_PLACEMENT_3D('',#187344,#187345,#187346); +#187344 = CARTESIAN_POINT('',(141.9392693167,-88.97791899764,1.585)); +#187345 = DIRECTION('',(0.,0.,-1.)); +#187346 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#187347 = ORIENTED_EDGE('',*,*,#187348,.T.); +#187348 = EDGE_CURVE('',#187340,#187349,#187351,.T.); +#187349 = VERTEX_POINT('',#187350); +#187350 = CARTESIAN_POINT('',(142.445144,-88.365976,1.585)); +#187351 = LINE('',#187352,#187353); +#187352 = CARTESIAN_POINT('',(141.886236,-88.924886,1.585)); +#187353 = VECTOR('',#187354,1.); +#187354 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#187355 = ORIENTED_EDGE('',*,*,#187356,.T.); +#187356 = EDGE_CURVE('',#187349,#187357,#187359,.T.); +#187357 = VERTEX_POINT('',#187358); +#187358 = CARTESIAN_POINT('',(142.483316,-88.251463,1.585)); +#187359 = LINE('',#187360,#187361); +#187360 = CARTESIAN_POINT('',(142.445144,-88.365976,1.585)); +#187361 = VECTOR('',#187362,1.); +#187362 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#187363 = ORIENTED_EDGE('',*,*,#187364,.T.); +#187364 = EDGE_CURVE('',#187357,#187365,#187367,.T.); +#187365 = VERTEX_POINT('',#187366); +#187366 = CARTESIAN_POINT('',(142.483316,-88.1861,1.585)); +#187367 = LINE('',#187368,#187369); +#187368 = CARTESIAN_POINT('',(142.483316,-88.251463,1.585)); +#187369 = VECTOR('',#187370,1.); +#187370 = DIRECTION('',(0.,1.,0.)); +#187371 = ORIENTED_EDGE('',*,*,#187372,.T.); +#187372 = EDGE_CURVE('',#187365,#187373,#187375,.T.); +#187373 = VERTEX_POINT('',#187374); +#187374 = CARTESIAN_POINT('',(142.350135,-88.052919,1.585)); +#187375 = CIRCLE('',#187376,0.18686440374); +#187376 = AXIS2_PLACEMENT_3D('',#187377,#187378,#187379); +#187377 = CARTESIAN_POINT('',(142.302599,-88.233636,1.585)); +#187378 = DIRECTION('',(0.,0.,1.)); +#187379 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#187380 = ORIENTED_EDGE('',*,*,#187381,.T.); +#187381 = EDGE_CURVE('',#187373,#187382,#187384,.T.); +#187382 = VERTEX_POINT('',#187383); +#187383 = CARTESIAN_POINT('',(142.14745,-88.052919,1.585)); +#187384 = LINE('',#187385,#187386); +#187385 = CARTESIAN_POINT('',(142.350135,-88.052919,1.585)); +#187386 = VECTOR('',#187387,1.); +#187387 = DIRECTION('',(-1.,0.,0.)); +#187388 = ORIENTED_EDGE('',*,*,#187389,.T.); +#187389 = EDGE_CURVE('',#187382,#187390,#187392,.T.); +#187390 = VERTEX_POINT('',#187391); +#187391 = CARTESIAN_POINT('',(142.078934,-88.087177,1.585)); +#187392 = LINE('',#187393,#187394); +#187393 = CARTESIAN_POINT('',(142.14745,-88.052919,1.585)); +#187394 = VECTOR('',#187395,1.); +#187395 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#187396 = ORIENTED_EDGE('',*,*,#187397,.T.); +#187397 = EDGE_CURVE('',#187390,#187398,#187400,.T.); +#187398 = VERTEX_POINT('',#187399); +#187399 = CARTESIAN_POINT('',(142.028556,-88.135517,1.585)); +#187400 = LINE('',#187401,#187402); +#187401 = CARTESIAN_POINT('',(142.078934,-88.087177,1.585)); +#187402 = VECTOR('',#187403,1.); +#187403 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#187404 = ORIENTED_EDGE('',*,*,#187405,.T.); +#187405 = EDGE_CURVE('',#187398,#187406,#187408,.T.); +#187406 = VERTEX_POINT('',#187407); +#187407 = CARTESIAN_POINT('',(141.933855,-88.020124,1.585)); +#187408 = CIRCLE('',#187409,7.499996838528E-02); +#187409 = AXIS2_PLACEMENT_3D('',#187410,#187411,#187412); +#187410 = CARTESIAN_POINT('',(141.986888,-88.07315697246,1.585)); +#187411 = DIRECTION('',(0.,0.,-1.)); +#187412 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#187413 = ORIENTED_EDGE('',*,*,#187414,.T.); +#187414 = EDGE_CURVE('',#187406,#187264,#187415,.T.); +#187415 = LINE('',#187416,#187417); +#187416 = CARTESIAN_POINT('',(141.933855,-88.020124,1.585)); +#187417 = VECTOR('',#187418,1.); +#187418 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#187419 = PLANE('',#187420); +#187420 = AXIS2_PLACEMENT_3D('',#187421,#187422,#187423); +#187421 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187422 = DIRECTION('',(0.,0.,1.)); +#187423 = DIRECTION('',(1.,0.,-0.)); +#187424 = SHELL_BASED_SURFACE_MODEL('',(#187425)); +#187425 = OPEN_SHELL('',(#187426)); +#187426 = ADVANCED_FACE('',(#187427),#187513,.T.); +#187427 = FACE_BOUND('',#187428,.F.); +#187428 = EDGE_LOOP('',(#187429,#187440,#187448,#187457,#187465,#187474, + #187482,#187491,#187499,#187507)); +#187429 = ORIENTED_EDGE('',*,*,#187430,.T.); +#187430 = EDGE_CURVE('',#187431,#187433,#187435,.T.); +#187431 = VERTEX_POINT('',#187432); +#187432 = CARTESIAN_POINT('',(140.516648,-87.915559,1.585)); +#187433 = VERTEX_POINT('',#187434); +#187434 = CARTESIAN_POINT('',(140.633316,-87.977919,1.585)); +#187435 = CIRCLE('',#187436,7.500000000004E-02); +#187436 = AXIS2_PLACEMENT_3D('',#187437,#187438,#187439); +#187437 = CARTESIAN_POINT('',(140.558316,-87.97791906555,1.585)); +#187438 = DIRECTION('',(0.,0.,-1.)); +#187439 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#187440 = ORIENTED_EDGE('',*,*,#187441,.T.); +#187441 = EDGE_CURVE('',#187433,#187442,#187444,.T.); +#187442 = VERTEX_POINT('',#187443); +#187443 = CARTESIAN_POINT('',(140.631116,-88.708666,1.585)); +#187444 = LINE('',#187445,#187446); +#187445 = CARTESIAN_POINT('',(140.633316,-87.977919,1.585)); +#187446 = VECTOR('',#187447,1.); +#187447 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#187448 = ORIENTED_EDGE('',*,*,#187449,.T.); +#187449 = EDGE_CURVE('',#187442,#187450,#187452,.T.); +#187450 = VERTEX_POINT('',#187451); +#187451 = CARTESIAN_POINT('',(140.280007,-89.052189,1.585)); +#187452 = CIRCLE('',#187453,0.38184101318); +#187453 = AXIS2_PLACEMENT_3D('',#187454,#187455,#187456); +#187454 = CARTESIAN_POINT('',(140.25109350032,-88.67144424444,1.585)); +#187455 = DIRECTION('',(0.,0.,-1.)); +#187456 = DIRECTION('',(0.995237511316,-9.747972132576E-02,0.)); +#187457 = ORIENTED_EDGE('',*,*,#187458,.T.); +#187458 = EDGE_CURVE('',#187450,#187459,#187461,.T.); +#187459 = VERTEX_POINT('',#187460); +#187460 = CARTESIAN_POINT('',(140.162732,-89.051478,1.585)); +#187461 = LINE('',#187462,#187463); +#187462 = CARTESIAN_POINT('',(140.280007,-89.052189,1.585)); +#187463 = VECTOR('',#187464,1.); +#187464 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#187465 = ORIENTED_EDGE('',*,*,#187466,.T.); +#187466 = EDGE_CURVE('',#187459,#187467,#187469,.T.); +#187467 = VERTEX_POINT('',#187468); +#187468 = CARTESIAN_POINT('',(140.177364,-88.902919,1.585)); +#187469 = CIRCLE('',#187470,7.500006711464E-02); +#187470 = AXIS2_PLACEMENT_3D('',#187471,#187472,#187473); +#187471 = CARTESIAN_POINT('',(140.17736393288,-88.97791906711,1.585)); +#187472 = DIRECTION('',(0.,0.,-1.)); +#187473 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#187474 = ORIENTED_EDGE('',*,*,#187475,.T.); +#187475 = EDGE_CURVE('',#187467,#187476,#187478,.T.); +#187476 = VERTEX_POINT('',#187477); +#187477 = CARTESIAN_POINT('',(140.260432,-88.902919,1.585)); +#187478 = LINE('',#187479,#187480); +#187479 = CARTESIAN_POINT('',(140.177364,-88.902919,1.585)); +#187480 = VECTOR('',#187481,1.); +#187481 = DIRECTION('',(1.,0.,0.)); +#187482 = ORIENTED_EDGE('',*,*,#187483,.T.); +#187483 = EDGE_CURVE('',#187476,#187484,#187486,.T.); +#187484 = VERTEX_POINT('',#187485); +#187485 = CARTESIAN_POINT('',(140.483316,-88.680034,1.585)); +#187486 = CIRCLE('',#187487,0.239437351684); +#187487 = AXIS2_PLACEMENT_3D('',#187488,#187489,#187490); +#187488 = CARTESIAN_POINT('',(140.24441490658,-88.66401797844,1.585)); +#187489 = DIRECTION('',(0.,0.,1.)); +#187490 = DIRECTION('',(6.689471506024E-02,-0.997760039838,0.)); +#187491 = ORIENTED_EDGE('',*,*,#187492,.T.); +#187492 = EDGE_CURVE('',#187484,#187493,#187495,.T.); +#187493 = VERTEX_POINT('',#187494); +#187494 = CARTESIAN_POINT('',(140.484757,-87.963287,1.585)); +#187495 = LINE('',#187496,#187497); +#187496 = CARTESIAN_POINT('',(140.483316,-88.680034,1.585)); +#187497 = VECTOR('',#187498,1.); +#187498 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#187499 = ORIENTED_EDGE('',*,*,#187500,.T.); +#187500 = EDGE_CURVE('',#187493,#187501,#187503,.T.); +#187501 = VERTEX_POINT('',#187502); +#187502 = CARTESIAN_POINT('',(140.495956,-87.936251,1.585)); +#187503 = LINE('',#187504,#187505); +#187504 = CARTESIAN_POINT('',(140.484757,-87.963287,1.585)); +#187505 = VECTOR('',#187506,1.); +#187506 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#187507 = ORIENTED_EDGE('',*,*,#187508,.T.); +#187508 = EDGE_CURVE('',#187501,#187431,#187509,.T.); +#187509 = LINE('',#187510,#187511); +#187510 = CARTESIAN_POINT('',(140.495956,-87.936251,1.585)); +#187511 = VECTOR('',#187512,1.); +#187512 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#187513 = PLANE('',#187514); +#187514 = AXIS2_PLACEMENT_3D('',#187515,#187516,#187517); +#187515 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187516 = DIRECTION('',(0.,0.,1.)); +#187517 = DIRECTION('',(1.,0.,-0.)); +#187518 = SHELL_BASED_SURFACE_MODEL('',(#187519)); +#187519 = OPEN_SHELL('',(#187520)); +#187520 = ADVANCED_FACE('',(#187521,#187599),#187651,.T.); +#187521 = FACE_BOUND('',#187522,.F.); +#187522 = EDGE_LOOP('',(#187523,#187534,#187542,#187551,#187559,#187568, + #187576,#187584,#187593)); +#187523 = ORIENTED_EDGE('',*,*,#187524,.T.); +#187524 = EDGE_CURVE('',#187525,#187527,#187529,.T.); +#187525 = VERTEX_POINT('',#187526); +#187526 = CARTESIAN_POINT('',(140.960948,-87.963287,1.585)); +#187527 = VERTEX_POINT('',#187528); +#187528 = CARTESIAN_POINT('',(141.034507,-87.902919,1.585)); +#187529 = CIRCLE('',#187530,7.500074938991E-02); +#187530 = AXIS2_PLACEMENT_3D('',#187531,#187532,#187533); +#187531 = CARTESIAN_POINT('',(141.03450746611,-87.97791974938,1.585)); +#187532 = DIRECTION('',(0.,0.,-1.)); +#187533 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#187534 = ORIENTED_EDGE('',*,*,#187535,.T.); +#187535 = EDGE_CURVE('',#187527,#187536,#187538,.T.); +#187536 = VERTEX_POINT('',#187537); +#187537 = CARTESIAN_POINT('',(141.430091,-87.90436,1.585)); +#187538 = LINE('',#187539,#187540); +#187539 = CARTESIAN_POINT('',(141.034507,-87.902919,1.585)); +#187540 = VECTOR('',#187541,1.); +#187541 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#187542 = ORIENTED_EDGE('',*,*,#187543,.T.); +#187543 = EDGE_CURVE('',#187536,#187544,#187546,.T.); +#187544 = VERTEX_POINT('',#187545); +#187545 = CARTESIAN_POINT('',(141.679494,-88.153763,1.585)); +#187546 = CIRCLE('',#187547,0.347870264855); +#187547 = AXIS2_PLACEMENT_3D('',#187548,#187549,#187550); +#187548 = CARTESIAN_POINT('',(141.34276326502,-88.24109073497,1.585)); +#187549 = DIRECTION('',(0.,0.,-1.)); +#187550 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#187551 = ORIENTED_EDGE('',*,*,#187552,.T.); +#187552 = EDGE_CURVE('',#187544,#187553,#187555,.T.); +#187553 = VERTEX_POINT('',#187554); +#187554 = CARTESIAN_POINT('',(141.678272,-88.331062,1.585)); +#187555 = LINE('',#187556,#187557); +#187556 = CARTESIAN_POINT('',(141.679494,-88.153763,1.585)); +#187557 = VECTOR('',#187558,1.); +#187558 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#187559 = ORIENTED_EDGE('',*,*,#187560,.T.); +#187560 = EDGE_CURVE('',#187553,#187561,#187563,.T.); +#187561 = VERTEX_POINT('',#187562); +#187562 = CARTESIAN_POINT('',(141.430091,-88.575287,1.585)); +#187563 = CIRCLE('',#187564,0.348632345849); +#187564 = AXIS2_PLACEMENT_3D('',#187565,#187566,#187567); +#187565 = CARTESIAN_POINT('',(141.34232219403,-88.2378834593,1.585)); +#187566 = DIRECTION('',(0.,0.,-1.)); +#187567 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#187568 = ORIENTED_EDGE('',*,*,#187569,.T.); +#187569 = EDGE_CURVE('',#187561,#187570,#187572,.T.); +#187570 = VERTEX_POINT('',#187571); +#187571 = CARTESIAN_POINT('',(141.109507,-88.576728,1.585)); +#187572 = LINE('',#187573,#187574); +#187573 = CARTESIAN_POINT('',(141.430091,-88.575287,1.585)); +#187574 = VECTOR('',#187575,1.); +#187575 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#187576 = ORIENTED_EDGE('',*,*,#187577,.T.); +#187577 = EDGE_CURVE('',#187570,#187578,#187580,.T.); +#187578 = VERTEX_POINT('',#187579); +#187579 = CARTESIAN_POINT('',(141.108066,-88.992551,1.585)); +#187580 = LINE('',#187581,#187582); +#187581 = CARTESIAN_POINT('',(141.109507,-88.576728,1.585)); +#187582 = VECTOR('',#187583,1.); +#187583 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#187584 = ORIENTED_EDGE('',*,*,#187585,.T.); +#187585 = EDGE_CURVE('',#187578,#187586,#187588,.T.); +#187586 = VERTEX_POINT('',#187587); +#187587 = CARTESIAN_POINT('',(140.959507,-88.977919,1.585)); +#187588 = CIRCLE('',#187589,7.500006711463E-02); +#187589 = AXIS2_PLACEMENT_3D('',#187590,#187591,#187592); +#187590 = CARTESIAN_POINT('',(141.03450706711,-88.97791906711,1.585)); +#187591 = DIRECTION('',(-0.,0.,-1.)); +#187592 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#187593 = ORIENTED_EDGE('',*,*,#187594,.T.); +#187594 = EDGE_CURVE('',#187586,#187525,#187595,.T.); +#187595 = LINE('',#187596,#187597); +#187596 = CARTESIAN_POINT('',(140.959507,-88.977919,1.585)); +#187597 = VECTOR('',#187598,1.); +#187598 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#187599 = FACE_BOUND('',#187600,.F.); +#187600 = EDGE_LOOP('',(#187601,#187612,#187620,#187628,#187636,#187645) + ); +#187601 = ORIENTED_EDGE('',*,*,#187602,.T.); +#187602 = EDGE_CURVE('',#187603,#187605,#187607,.T.); +#187603 = VERTEX_POINT('',#187604); +#187604 = CARTESIAN_POINT('',(141.530935,-88.1861,1.585)); +#187605 = VERTEX_POINT('',#187606); +#187606 = CARTESIAN_POINT('',(141.397754,-88.052919,1.585)); +#187607 = CIRCLE('',#187608,0.18686440374); +#187608 = AXIS2_PLACEMENT_3D('',#187609,#187610,#187611); +#187609 = CARTESIAN_POINT('',(141.350218,-88.233636,1.585)); +#187610 = DIRECTION('',(0.,0.,1.)); +#187611 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#187612 = ORIENTED_EDGE('',*,*,#187613,.T.); +#187613 = EDGE_CURVE('',#187605,#187614,#187616,.T.); +#187614 = VERTEX_POINT('',#187615); +#187615 = CARTESIAN_POINT('',(141.109507,-88.052919,1.585)); +#187616 = LINE('',#187617,#187618); +#187617 = CARTESIAN_POINT('',(141.397754,-88.052919,1.585)); +#187618 = VECTOR('',#187619,1.); +#187619 = DIRECTION('',(-1.,0.,0.)); +#187620 = ORIENTED_EDGE('',*,*,#187621,.T.); +#187621 = EDGE_CURVE('',#187614,#187622,#187624,.T.); +#187622 = VERTEX_POINT('',#187623); +#187623 = CARTESIAN_POINT('',(141.109507,-88.426728,1.585)); +#187624 = LINE('',#187625,#187626); +#187625 = CARTESIAN_POINT('',(141.109507,-88.052919,1.585)); +#187626 = VECTOR('',#187627,1.); +#187627 = DIRECTION('',(0.,-1.,0.)); +#187628 = ORIENTED_EDGE('',*,*,#187629,.T.); +#187629 = EDGE_CURVE('',#187622,#187630,#187632,.T.); +#187630 = VERTEX_POINT('',#187631); +#187631 = CARTESIAN_POINT('',(141.397754,-88.426728,1.585)); +#187632 = LINE('',#187633,#187634); +#187633 = CARTESIAN_POINT('',(141.109507,-88.426728,1.585)); +#187634 = VECTOR('',#187635,1.); +#187635 = DIRECTION('',(1.,0.,0.)); +#187636 = ORIENTED_EDGE('',*,*,#187637,.T.); +#187637 = EDGE_CURVE('',#187630,#187638,#187640,.T.); +#187638 = VERTEX_POINT('',#187639); +#187639 = CARTESIAN_POINT('',(141.530935,-88.293547,1.585)); +#187640 = CIRCLE('',#187641,0.18686440374); +#187641 = AXIS2_PLACEMENT_3D('',#187642,#187643,#187644); +#187642 = CARTESIAN_POINT('',(141.350218,-88.246011,1.585)); +#187643 = DIRECTION('',(0.,0.,1.)); +#187644 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#187645 = ORIENTED_EDGE('',*,*,#187646,.T.); +#187646 = EDGE_CURVE('',#187638,#187603,#187647,.T.); +#187647 = LINE('',#187648,#187649); +#187648 = CARTESIAN_POINT('',(141.530935,-88.293547,1.585)); +#187649 = VECTOR('',#187650,1.); +#187650 = DIRECTION('',(0.,1.,0.)); +#187651 = PLANE('',#187652); +#187652 = AXIS2_PLACEMENT_3D('',#187653,#187654,#187655); +#187653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187654 = DIRECTION('',(0.,0.,1.)); +#187655 = DIRECTION('',(1.,0.,-0.)); +#187656 = SHELL_BASED_SURFACE_MODEL('',(#187657)); +#187657 = OPEN_SHELL('',(#187658)); +#187658 = ADVANCED_FACE('',(#187659),#187769,.T.); +#187659 = FACE_BOUND('',#187660,.F.); +#187660 = EDGE_LOOP('',(#187661,#187672,#187680,#187689,#187697,#187705, + #187713,#187721,#187729,#187738,#187746,#187755,#187763)); +#187661 = ORIENTED_EDGE('',*,*,#187662,.T.); +#187662 = EDGE_CURVE('',#187663,#187665,#187667,.T.); +#187663 = VERTEX_POINT('',#187664); +#187664 = CARTESIAN_POINT('',(185.04894,-88.047652,1.585)); +#187665 = VERTEX_POINT('',#187666); +#187666 = CARTESIAN_POINT('',(185.04894,-87.83188,1.585)); +#187667 = CIRCLE('',#187668,0.109999639072); +#187668 = AXIS2_PLACEMENT_3D('',#187669,#187670,#187671); +#187669 = CARTESIAN_POINT('',(185.0704,-87.939766,1.585)); +#187670 = DIRECTION('',(0.,0.,-1.)); +#187671 = DIRECTION('',(-0.195091549218,-0.980785036297,-0.)); +#187672 = ORIENTED_EDGE('',*,*,#187673,.T.); +#187673 = EDGE_CURVE('',#187665,#187674,#187676,.T.); +#187674 = VERTEX_POINT('',#187675); +#187675 = CARTESIAN_POINT('',(186.675916,-87.830309,1.585)); +#187676 = LINE('',#187677,#187678); +#187677 = CARTESIAN_POINT('',(185.04894,-87.83188,1.585)); +#187678 = VECTOR('',#187679,1.); +#187679 = DIRECTION('',(0.999999533813,9.655946170191E-04,0.)); +#187680 = ORIENTED_EDGE('',*,*,#187681,.T.); +#187681 = EDGE_CURVE('',#187674,#187682,#187684,.T.); +#187682 = VERTEX_POINT('',#187683); +#187683 = CARTESIAN_POINT('',(186.778286,-87.918306,1.585)); +#187684 = CIRCLE('',#187685,0.108572695323); +#187685 = AXIS2_PLACEMENT_3D('',#187686,#187687,#187688); +#187686 = CARTESIAN_POINT('',(186.67166475277,-87.93879843297,1.585)); +#187687 = DIRECTION('',(0.,0.,-1.)); +#187688 = DIRECTION('',(3.915576762808E-02,0.999233118877,0.)); +#187689 = ORIENTED_EDGE('',*,*,#187690,.T.); +#187690 = EDGE_CURVE('',#187682,#187691,#187693,.T.); +#187691 = VERTEX_POINT('',#187692); +#187692 = CARTESIAN_POINT('',(186.778286,-87.961226,1.585)); +#187693 = LINE('',#187694,#187695); +#187694 = CARTESIAN_POINT('',(186.778286,-87.918306,1.585)); +#187695 = VECTOR('',#187696,1.); +#187696 = DIRECTION('',(0.,-1.,0.)); +#187697 = ORIENTED_EDGE('',*,*,#187698,.T.); +#187698 = EDGE_CURVE('',#187691,#187699,#187701,.T.); +#187699 = VERTEX_POINT('',#187700); +#187700 = CARTESIAN_POINT('',(186.761862,-88.000879,1.585)); +#187701 = LINE('',#187702,#187703); +#187702 = CARTESIAN_POINT('',(186.778286,-87.961226,1.585)); +#187703 = VECTOR('',#187704,1.); +#187704 = DIRECTION('',(-0.382667315962,-0.923886207979,0.)); +#187705 = ORIENTED_EDGE('',*,*,#187706,.T.); +#187706 = EDGE_CURVE('',#187699,#187707,#187709,.T.); +#187707 = VERTEX_POINT('',#187708); +#187708 = CARTESIAN_POINT('',(186.724975,-88.035273,1.585)); +#187709 = LINE('',#187710,#187711); +#187710 = CARTESIAN_POINT('',(186.761862,-88.000879,1.585)); +#187711 = VECTOR('',#187712,1.); +#187712 = DIRECTION('',(-0.731390134344,-0.681959288656,0.)); +#187713 = ORIENTED_EDGE('',*,*,#187714,.T.); +#187714 = EDGE_CURVE('',#187707,#187715,#187717,.T.); +#187715 = VERTEX_POINT('',#187716); +#187716 = CARTESIAN_POINT('',(185.484612,-88.744052,1.585)); +#187717 = LINE('',#187718,#187719); +#187718 = CARTESIAN_POINT('',(186.724975,-88.035273,1.585)); +#187719 = VECTOR('',#187720,1.); +#187720 = DIRECTION('',(-0.868243099048,-0.49613901374,0.)); +#187721 = ORIENTED_EDGE('',*,*,#187722,.T.); +#187722 = EDGE_CURVE('',#187715,#187723,#187725,.T.); +#187723 = VERTEX_POINT('',#187724); +#187724 = CARTESIAN_POINT('',(186.69186,-88.746166,1.585)); +#187725 = LINE('',#187726,#187727); +#187726 = CARTESIAN_POINT('',(185.484612,-88.744052,1.585)); +#187727 = VECTOR('',#187728,1.); +#187728 = DIRECTION('',(0.999998466845,-1.751087397881E-03,0.)); +#187729 = ORIENTED_EDGE('',*,*,#187730,.T.); +#187730 = EDGE_CURVE('',#187723,#187731,#187733,.T.); +#187731 = VERTEX_POINT('',#187732); +#187732 = CARTESIAN_POINT('',(186.69186,-88.961938,1.585)); +#187733 = CIRCLE('',#187734,0.109999639072); +#187734 = AXIS2_PLACEMENT_3D('',#187735,#187736,#187737); +#187735 = CARTESIAN_POINT('',(186.6704,-88.854052,1.585)); +#187736 = DIRECTION('',(0.,0.,-1.)); +#187737 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#187738 = ORIENTED_EDGE('',*,*,#187739,.T.); +#187739 = EDGE_CURVE('',#187731,#187740,#187742,.T.); +#187740 = VERTEX_POINT('',#187741); +#187741 = CARTESIAN_POINT('',(185.04894,-88.961938,1.585)); +#187742 = LINE('',#187743,#187744); +#187743 = CARTESIAN_POINT('',(186.69186,-88.961938,1.585)); +#187744 = VECTOR('',#187745,1.); +#187745 = DIRECTION('',(-1.,0.,0.)); +#187746 = ORIENTED_EDGE('',*,*,#187747,.T.); +#187747 = EDGE_CURVE('',#187740,#187748,#187750,.T.); +#187748 = VERTEX_POINT('',#187749); +#187749 = CARTESIAN_POINT('',(185.015825,-88.758545,1.585)); +#187750 = CIRCLE('',#187751,0.109999974265); +#187751 = AXIS2_PLACEMENT_3D('',#187752,#187753,#187754); +#187752 = CARTESIAN_POINT('',(185.07040028505,-88.85405171494,1.585)); +#187753 = DIRECTION('',(0.,0.,-1.)); +#187754 = DIRECTION('',(-0.195093546165,-0.980784639075,-0.)); +#187755 = ORIENTED_EDGE('',*,*,#187756,.T.); +#187756 = EDGE_CURVE('',#187748,#187757,#187759,.T.); +#187757 = VERTEX_POINT('',#187758); +#187758 = CARTESIAN_POINT('',(186.256188,-88.049766,1.585)); +#187759 = LINE('',#187760,#187761); +#187760 = CARTESIAN_POINT('',(185.015825,-88.758545,1.585)); +#187761 = VECTOR('',#187762,1.); +#187762 = DIRECTION('',(0.868243099048,0.49613901374,0.)); +#187763 = ORIENTED_EDGE('',*,*,#187764,.T.); +#187764 = EDGE_CURVE('',#187757,#187663,#187765,.T.); +#187765 = LINE('',#187766,#187767); +#187766 = CARTESIAN_POINT('',(186.256188,-88.049766,1.585)); +#187767 = VECTOR('',#187768,1.); +#187768 = DIRECTION('',(-0.999998466845,1.751087397881E-03,0.)); +#187769 = PLANE('',#187770); +#187770 = AXIS2_PLACEMENT_3D('',#187771,#187772,#187773); +#187771 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187772 = DIRECTION('',(0.,0.,1.)); +#187773 = DIRECTION('',(1.,0.,-0.)); +#187774 = SHELL_BASED_SURFACE_MODEL('',(#187775)); +#187775 = OPEN_SHELL('',(#187776)); +#187776 = ADVANCED_FACE('',(#187777),#187813,.T.); +#187777 = FACE_BOUND('',#187778,.F.); +#187778 = EDGE_LOOP('',(#187779,#187790,#187798,#187807)); +#187779 = ORIENTED_EDGE('',*,*,#187780,.T.); +#187780 = EDGE_CURVE('',#187781,#187783,#187785,.T.); +#187781 = VERTEX_POINT('',#187782); +#187782 = CARTESIAN_POINT('',(172.207142,-88.93174,1.585)); +#187783 = VERTEX_POINT('',#187784); +#187784 = CARTESIAN_POINT('',(172.207142,-88.80174,1.585)); +#187785 = CIRCLE('',#187786,6.500000000092E-02); +#187786 = AXIS2_PLACEMENT_3D('',#187787,#187788,#187789); +#187787 = CARTESIAN_POINT('',(172.20714234486,-88.86674,1.585)); +#187788 = DIRECTION('',(0.,0.,-1.)); +#187789 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#187790 = ORIENTED_EDGE('',*,*,#187791,.T.); +#187791 = EDGE_CURVE('',#187783,#187792,#187794,.T.); +#187792 = VERTEX_POINT('',#187793); +#187793 = CARTESIAN_POINT('',(172.892857,-88.80174,1.585)); +#187794 = LINE('',#187795,#187796); +#187795 = CARTESIAN_POINT('',(172.207142,-88.80174,1.585)); +#187796 = VECTOR('',#187797,1.); +#187797 = DIRECTION('',(1.,0.,0.)); +#187798 = ORIENTED_EDGE('',*,*,#187799,.T.); +#187799 = EDGE_CURVE('',#187792,#187800,#187802,.T.); +#187800 = VERTEX_POINT('',#187801); +#187801 = CARTESIAN_POINT('',(172.892857,-88.93174,1.585)); +#187802 = CIRCLE('',#187803,6.500000000092E-02); +#187803 = AXIS2_PLACEMENT_3D('',#187804,#187805,#187806); +#187804 = CARTESIAN_POINT('',(172.89285665513,-88.86674,1.585)); +#187805 = DIRECTION('',(0.,0.,-1.)); +#187806 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#187807 = ORIENTED_EDGE('',*,*,#187808,.T.); +#187808 = EDGE_CURVE('',#187800,#187781,#187809,.T.); +#187809 = LINE('',#187810,#187811); +#187810 = CARTESIAN_POINT('',(172.892857,-88.93174,1.585)); +#187811 = VECTOR('',#187812,1.); +#187812 = DIRECTION('',(-1.,0.,0.)); +#187813 = PLANE('',#187814); +#187814 = AXIS2_PLACEMENT_3D('',#187815,#187816,#187817); +#187815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187816 = DIRECTION('',(0.,0.,1.)); +#187817 = DIRECTION('',(1.,0.,-0.)); +#187818 = SHELL_BASED_SURFACE_MODEL('',(#187819)); +#187819 = OPEN_SHELL('',(#187820)); +#187820 = ADVANCED_FACE('',(#187821,#188017,#188084),#188136,.T.); +#187821 = FACE_BOUND('',#187822,.F.); +#187822 = EDGE_LOOP('',(#187823,#187834,#187842,#187851,#187859,#187867, + #187875,#187883,#187891,#187899,#187907,#187915,#187923,#187931, + #187939,#187947,#187955,#187963,#187971,#187979,#187987,#187995, + #188003,#188011)); +#187823 = ORIENTED_EDGE('',*,*,#187824,.T.); +#187824 = EDGE_CURVE('',#187825,#187827,#187829,.T.); +#187825 = VERTEX_POINT('',#187826); +#187826 = CARTESIAN_POINT('',(82.565672,-87.049308,1.585)); +#187827 = VERTEX_POINT('',#187828); +#187828 = CARTESIAN_POINT('',(82.683526,-86.931454,1.585)); +#187829 = CIRCLE('',#187830,0.150002525551); +#187830 = AXIS2_PLACEMENT_3D('',#187831,#187832,#187833); +#187831 = CARTESIAN_POINT('',(82.712791899413,-87.07857389941,1.585)); +#187832 = DIRECTION('',(0.,0.,-1.)); +#187833 = DIRECTION('',(-0.980782815972,0.19510271114,0.)); +#187834 = ORIENTED_EDGE('',*,*,#187835,.T.); +#187835 = EDGE_CURVE('',#187827,#187836,#187838,.T.); +#187836 = VERTEX_POINT('',#187837); +#187837 = CARTESIAN_POINT('',(85.342054,-86.931454,1.585)); +#187838 = LINE('',#187839,#187840); +#187839 = CARTESIAN_POINT('',(82.683526,-86.931454,1.585)); +#187840 = VECTOR('',#187841,1.); +#187841 = DIRECTION('',(1.,0.,0.)); +#187842 = ORIENTED_EDGE('',*,*,#187843,.T.); +#187843 = EDGE_CURVE('',#187836,#187844,#187846,.T.); +#187844 = VERTEX_POINT('',#187845); +#187845 = CARTESIAN_POINT('',(85.459908,-87.049308,1.585)); +#187846 = CIRCLE('',#187847,0.150002525551); +#187847 = AXIS2_PLACEMENT_3D('',#187848,#187849,#187850); +#187848 = CARTESIAN_POINT('',(85.312788100587,-87.07857389941,1.585)); +#187849 = DIRECTION('',(0.,0.,-1.)); +#187850 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#187851 = ORIENTED_EDGE('',*,*,#187852,.T.); +#187852 = EDGE_CURVE('',#187844,#187853,#187855,.T.); +#187853 = VERTEX_POINT('',#187854); +#187854 = CARTESIAN_POINT('',(85.459908,-87.974503,1.585)); +#187855 = LINE('',#187856,#187857); +#187856 = CARTESIAN_POINT('',(85.459908,-87.049308,1.585)); +#187857 = VECTOR('',#187858,1.); +#187858 = DIRECTION('',(0.,-1.,0.)); +#187859 = ORIENTED_EDGE('',*,*,#187860,.T.); +#187860 = EDGE_CURVE('',#187853,#187861,#187863,.T.); +#187861 = VERTEX_POINT('',#187862); +#187862 = CARTESIAN_POINT('',(85.446954,-88.012321,1.585)); +#187863 = LINE('',#187864,#187865); +#187864 = CARTESIAN_POINT('',(85.459908,-87.974503,1.585)); +#187865 = VECTOR('',#187866,1.); +#187866 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#187867 = ORIENTED_EDGE('',*,*,#187868,.T.); +#187868 = EDGE_CURVE('',#187861,#187869,#187871,.T.); +#187869 = VERTEX_POINT('',#187870); +#187870 = CARTESIAN_POINT('',(85.307479,-88.284826,1.585)); +#187871 = LINE('',#187872,#187873); +#187872 = CARTESIAN_POINT('',(85.446954,-88.012321,1.585)); +#187873 = VECTOR('',#187874,1.); +#187874 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#187875 = ORIENTED_EDGE('',*,*,#187876,.T.); +#187876 = EDGE_CURVE('',#187869,#187877,#187879,.T.); +#187877 = VERTEX_POINT('',#187878); +#187878 = CARTESIAN_POINT('',(85.148506,-88.441388,1.585)); +#187879 = LINE('',#187880,#187881); +#187880 = CARTESIAN_POINT('',(85.307479,-88.284826,1.585)); +#187881 = VECTOR('',#187882,1.); +#187882 = DIRECTION('',(-0.712488978586,-0.70168330135,0.)); +#187883 = ORIENTED_EDGE('',*,*,#187884,.T.); +#187884 = EDGE_CURVE('',#187877,#187885,#187887,.T.); +#187885 = VERTEX_POINT('',#187886); +#187886 = CARTESIAN_POINT('',(84.857171,-88.585151,1.585)); +#187887 = LINE('',#187888,#187889); +#187888 = CARTESIAN_POINT('',(85.148506,-88.441388,1.585)); +#187889 = VECTOR('',#187890,1.); +#187890 = DIRECTION('',(-0.896759796352,-0.442517646706,0.)); +#187891 = ORIENTED_EDGE('',*,*,#187892,.T.); +#187892 = EDGE_CURVE('',#187885,#187893,#187895,.T.); +#187893 = VERTEX_POINT('',#187894); +#187894 = CARTESIAN_POINT('',(84.817552,-88.590477,1.585)); +#187895 = LINE('',#187896,#187897); +#187896 = CARTESIAN_POINT('',(84.857171,-88.585151,1.585)); +#187897 = VECTOR('',#187898,1.); +#187898 = DIRECTION('',(-0.991084879219,-0.133231986338,0.)); +#187899 = ORIENTED_EDGE('',*,*,#187900,.T.); +#187900 = EDGE_CURVE('',#187893,#187901,#187903,.T.); +#187901 = VERTEX_POINT('',#187902); +#187902 = CARTESIAN_POINT('',(84.540669,-88.587595,1.585)); +#187903 = LINE('',#187904,#187905); +#187904 = CARTESIAN_POINT('',(84.817552,-88.590477,1.585)); +#187905 = VECTOR('',#187906,1.); +#187906 = DIRECTION('',(-0.999945833586,1.04081647931E-02,0.)); +#187907 = ORIENTED_EDGE('',*,*,#187908,.T.); +#187908 = EDGE_CURVE('',#187901,#187909,#187911,.T.); +#187909 = VERTEX_POINT('',#187910); +#187910 = CARTESIAN_POINT('',(84.502851,-88.574641,1.585)); +#187911 = LINE('',#187912,#187913); +#187912 = CARTESIAN_POINT('',(84.540669,-88.587595,1.585)); +#187913 = VECTOR('',#187914,1.); +#187914 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#187915 = ORIENTED_EDGE('',*,*,#187916,.T.); +#187916 = EDGE_CURVE('',#187909,#187917,#187919,.T.); +#187917 = VERTEX_POINT('',#187918); +#187918 = CARTESIAN_POINT('',(84.230346,-88.435166,1.585)); +#187919 = LINE('',#187920,#187921); +#187920 = CARTESIAN_POINT('',(84.502851,-88.574641,1.585)); +#187921 = VECTOR('',#187922,1.); +#187922 = DIRECTION('',(-0.890176840372,0.455615180679,0.)); +#187923 = ORIENTED_EDGE('',*,*,#187924,.T.); +#187924 = EDGE_CURVE('',#187917,#187925,#187927,.T.); +#187925 = VERTEX_POINT('',#187926); +#187926 = CARTESIAN_POINT('',(84.109294,-88.31578,1.585)); +#187927 = LINE('',#187928,#187929); +#187928 = CARTESIAN_POINT('',(84.230346,-88.435166,1.585)); +#187929 = VECTOR('',#187930,1.); +#187930 = DIRECTION('',(-0.711989247494,0.702190366961,0.)); +#187931 = ORIENTED_EDGE('',*,*,#187932,.T.); +#187932 = EDGE_CURVE('',#187925,#187933,#187935,.T.); +#187933 = VERTEX_POINT('',#187934); +#187934 = CARTESIAN_POINT('',(84.075606,-88.400002,1.585)); +#187935 = LINE('',#187936,#187937); +#187936 = CARTESIAN_POINT('',(84.109294,-88.31578,1.585)); +#187937 = VECTOR('',#187938,1.); +#187938 = DIRECTION('',(-0.371383073449,-0.928479732011,0.)); +#187939 = ORIENTED_EDGE('',*,*,#187940,.T.); +#187940 = EDGE_CURVE('',#187933,#187941,#187943,.T.); +#187941 = VERTEX_POINT('',#187942); +#187942 = CARTESIAN_POINT('',(83.910412,-88.565198,1.585)); +#187943 = LINE('',#187944,#187945); +#187944 = CARTESIAN_POINT('',(84.075606,-88.400002,1.585)); +#187945 = VECTOR('',#187946,1.); +#187946 = DIRECTION('',(-0.707102500737,-0.707111061611,0.)); +#187947 = ORIENTED_EDGE('',*,*,#187948,.T.); +#187948 = EDGE_CURVE('',#187941,#187949,#187951,.T.); +#187949 = VERTEX_POINT('',#187950); +#187950 = CARTESIAN_POINT('',(83.619075,-88.70896,1.585)); +#187951 = LINE('',#187952,#187953); +#187952 = CARTESIAN_POINT('',(83.910412,-88.565198,1.585)); +#187953 = VECTOR('',#187954,1.); +#187954 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#187955 = ORIENTED_EDGE('',*,*,#187956,.T.); +#187956 = EDGE_CURVE('',#187949,#187957,#187959,.T.); +#187957 = VERTEX_POINT('',#187958); +#187958 = CARTESIAN_POINT('',(83.579457,-88.714286,1.585)); +#187959 = LINE('',#187960,#187961); +#187960 = CARTESIAN_POINT('',(83.619075,-88.70896,1.585)); +#187961 = VECTOR('',#187962,1.); +#187962 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#187963 = ORIENTED_EDGE('',*,*,#187964,.T.); +#187964 = EDGE_CURVE('',#187957,#187965,#187967,.T.); +#187965 = VERTEX_POINT('',#187966); +#187966 = CARTESIAN_POINT('',(83.178764,-88.711404,1.585)); +#187967 = LINE('',#187968,#187969); +#187968 = CARTESIAN_POINT('',(83.579457,-88.714286,1.585)); +#187969 = VECTOR('',#187970,1.); +#187970 = DIRECTION('',(-0.999974134695,7.192352889099E-03,0.)); +#187971 = ORIENTED_EDGE('',*,*,#187972,.T.); +#187972 = EDGE_CURVE('',#187965,#187973,#187975,.T.); +#187973 = VERTEX_POINT('',#187974); +#187974 = CARTESIAN_POINT('',(83.140946,-88.69845,1.585)); +#187975 = LINE('',#187976,#187977); +#187976 = CARTESIAN_POINT('',(83.178764,-88.711404,1.585)); +#187977 = VECTOR('',#187978,1.); +#187978 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#187979 = ORIENTED_EDGE('',*,*,#187980,.T.); +#187980 = EDGE_CURVE('',#187973,#187981,#187983,.T.); +#187981 = VERTEX_POINT('',#187982); +#187982 = CARTESIAN_POINT('',(82.868442,-88.558976,1.585)); +#187983 = LINE('',#187984,#187985); +#187984 = CARTESIAN_POINT('',(83.140946,-88.69845,1.585)); +#187985 = VECTOR('',#187986,1.); +#187986 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#187987 = ORIENTED_EDGE('',*,*,#187988,.T.); +#187988 = EDGE_CURVE('',#187981,#187989,#187991,.T.); +#187989 = VERTEX_POINT('',#187990); +#187990 = CARTESIAN_POINT('',(82.711879,-88.400002,1.585)); +#187991 = LINE('',#187992,#187993); +#187992 = CARTESIAN_POINT('',(82.868442,-88.558976,1.585)); +#187993 = VECTOR('',#187994,1.); +#187994 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#187995 = ORIENTED_EDGE('',*,*,#187996,.T.); +#187996 = EDGE_CURVE('',#187989,#187997,#187999,.T.); +#187997 = VERTEX_POINT('',#187998); +#187998 = CARTESIAN_POINT('',(82.568116,-88.108667,1.585)); +#187999 = LINE('',#188000,#188001); +#188000 = CARTESIAN_POINT('',(82.711879,-88.400002,1.585)); +#188001 = VECTOR('',#188002,1.); +#188002 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#188003 = ORIENTED_EDGE('',*,*,#188004,.T.); +#188004 = EDGE_CURVE('',#187997,#188005,#188007,.T.); +#188005 = VERTEX_POINT('',#188006); +#188006 = CARTESIAN_POINT('',(82.56279,-88.069048,1.585)); +#188007 = LINE('',#188008,#188009); +#188008 = CARTESIAN_POINT('',(82.568116,-88.108667,1.585)); +#188009 = VECTOR('',#188010,1.); +#188010 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#188011 = ORIENTED_EDGE('',*,*,#188012,.T.); +#188012 = EDGE_CURVE('',#188005,#187825,#188013,.T.); +#188013 = LINE('',#188014,#188015); +#188014 = CARTESIAN_POINT('',(82.56279,-88.069048,1.585)); +#188015 = VECTOR('',#188016,1.); +#188016 = DIRECTION('',(2.826199315639E-03,0.999996006291,0.)); +#188017 = FACE_BOUND('',#188018,.F.); +#188018 = EDGE_LOOP('',(#188019,#188029,#188037,#188045,#188054,#188062, + #188070,#188078)); +#188019 = ORIENTED_EDGE('',*,*,#188020,.T.); +#188020 = EDGE_CURVE('',#188021,#188023,#188025,.T.); +#188021 = VERTEX_POINT('',#188022); +#188022 = CARTESIAN_POINT('',(83.924695,-87.920897,1.585)); +#188023 = VERTEX_POINT('',#188024); +#188024 = CARTESIAN_POINT('',(83.924695,-87.228572,1.585)); +#188025 = LINE('',#188026,#188027); +#188026 = CARTESIAN_POINT('',(83.924695,-87.920897,1.585)); +#188027 = VECTOR('',#188028,1.); +#188028 = DIRECTION('',(0.,1.,0.)); +#188029 = ORIENTED_EDGE('',*,*,#188030,.T.); +#188030 = EDGE_CURVE('',#188023,#188031,#188033,.T.); +#188031 = VERTEX_POINT('',#188032); +#188032 = CARTESIAN_POINT('',(82.86279,-87.228572,1.585)); +#188033 = LINE('',#188034,#188035); +#188034 = CARTESIAN_POINT('',(83.924695,-87.228572,1.585)); +#188035 = VECTOR('',#188036,1.); +#188036 = DIRECTION('',(-1.,0.,0.)); +#188037 = ORIENTED_EDGE('',*,*,#188038,.T.); +#188038 = EDGE_CURVE('',#188031,#188039,#188041,.T.); +#188039 = VERTEX_POINT('',#188040); +#188040 = CARTESIAN_POINT('',(82.86279,-88.033637,1.585)); +#188041 = LINE('',#188042,#188043); +#188042 = CARTESIAN_POINT('',(82.86279,-87.228572,1.585)); +#188043 = VECTOR('',#188044,1.); +#188044 = DIRECTION('',(0.,-1.,0.)); +#188045 = ORIENTED_EDGE('',*,*,#188046,.T.); +#188046 = EDGE_CURVE('',#188039,#188047,#188049,.T.); +#188047 = VERTEX_POINT('',#188048); +#188048 = CARTESIAN_POINT('',(83.243438,-88.414286,1.585)); +#188049 = CIRCLE('',#188050,0.536608239522); +#188050 = AXIS2_PLACEMENT_3D('',#188051,#188052,#188053); +#188051 = CARTESIAN_POINT('',(83.381368724711,-87.89570763764,1.585)); +#188052 = DIRECTION('',(0.,0.,1.)); +#188053 = DIRECTION('',(-0.966400972846,-0.25703921818,0.)); +#188054 = ORIENTED_EDGE('',*,*,#188055,.T.); +#188055 = EDGE_CURVE('',#188047,#188056,#188058,.T.); +#188056 = VERTEX_POINT('',#188057); +#188057 = CARTESIAN_POINT('',(83.544047,-88.414286,1.585)); +#188058 = LINE('',#188059,#188060); +#188059 = CARTESIAN_POINT('',(83.243438,-88.414286,1.585)); +#188060 = VECTOR('',#188061,1.); +#188061 = DIRECTION('',(1.,0.,0.)); +#188062 = ORIENTED_EDGE('',*,*,#188063,.T.); +#188063 = EDGE_CURVE('',#188056,#188064,#188066,.T.); +#188064 = VERTEX_POINT('',#188065); +#188065 = CARTESIAN_POINT('',(83.738221,-88.317199,1.585)); +#188066 = LINE('',#188067,#188068); +#188067 = CARTESIAN_POINT('',(83.544047,-88.414286,1.585)); +#188068 = VECTOR('',#188069,1.); +#188069 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#188070 = ORIENTED_EDGE('',*,*,#188071,.T.); +#188071 = EDGE_CURVE('',#188064,#188072,#188074,.T.); +#188072 = VERTEX_POINT('',#188073); +#188073 = CARTESIAN_POINT('',(83.81978,-88.235639,1.585)); +#188074 = LINE('',#188075,#188076); +#188075 = CARTESIAN_POINT('',(83.738221,-88.317199,1.585)); +#188076 = VECTOR('',#188077,1.); +#188077 = DIRECTION('',(0.70710244626,0.707111116087,0.)); +#188078 = ORIENTED_EDGE('',*,*,#188079,.T.); +#188079 = EDGE_CURVE('',#188072,#188021,#188080,.T.); +#188080 = LINE('',#188081,#188082); +#188081 = CARTESIAN_POINT('',(83.81978,-88.235639,1.585)); +#188082 = VECTOR('',#188083,1.); +#188083 = DIRECTION('',(0.316230478759,0.948682393799,0.)); +#188084 = FACE_BOUND('',#188085,.F.); +#188085 = EDGE_LOOP('',(#188086,#188097,#188105,#188113,#188121,#188130) + ); +#188086 = ORIENTED_EDGE('',*,*,#188087,.T.); +#188087 = EDGE_CURVE('',#188088,#188090,#188092,.T.); +#188088 = VERTEX_POINT('',#188089); +#188089 = CARTESIAN_POINT('',(84.782142,-88.290477,1.585)); +#188090 = VERTEX_POINT('',#188091); +#188091 = CARTESIAN_POINT('',(85.16279,-87.909828,1.585)); +#188092 = CIRCLE('',#188093,0.53661283273); +#188093 = AXIS2_PLACEMENT_3D('',#188094,#188095,#188096); +#188094 = CARTESIAN_POINT('',(84.644207520954,-87.77189488331,1.585)); +#188095 = DIRECTION('',(0.,0.,1.)); +#188096 = DIRECTION('',(0.257046553181,-0.966399021884,0.)); +#188097 = ORIENTED_EDGE('',*,*,#188098,.T.); +#188098 = EDGE_CURVE('',#188090,#188099,#188101,.T.); +#188099 = VERTEX_POINT('',#188100); +#188100 = CARTESIAN_POINT('',(85.16279,-87.228572,1.585)); +#188101 = LINE('',#188102,#188103); +#188102 = CARTESIAN_POINT('',(85.16279,-87.909828,1.585)); +#188103 = VECTOR('',#188104,1.); +#188104 = DIRECTION('',(0.,1.,0.)); +#188105 = ORIENTED_EDGE('',*,*,#188106,.T.); +#188106 = EDGE_CURVE('',#188099,#188107,#188109,.T.); +#188107 = VERTEX_POINT('',#188108); +#188108 = CARTESIAN_POINT('',(84.224695,-87.228572,1.585)); +#188109 = LINE('',#188110,#188111); +#188110 = CARTESIAN_POINT('',(85.16279,-87.228572,1.585)); +#188111 = VECTOR('',#188112,1.); +#188112 = DIRECTION('',(-1.,0.,0.)); +#188113 = ORIENTED_EDGE('',*,*,#188114,.T.); +#188114 = EDGE_CURVE('',#188107,#188115,#188117,.T.); +#188115 = VERTEX_POINT('',#188116); +#188116 = CARTESIAN_POINT('',(84.224695,-87.909829,1.585)); +#188117 = LINE('',#188118,#188119); +#188118 = CARTESIAN_POINT('',(84.224695,-87.228572,1.585)); +#188119 = VECTOR('',#188120,1.); +#188120 = DIRECTION('',(0.,-1.,0.)); +#188121 = ORIENTED_EDGE('',*,*,#188122,.T.); +#188122 = EDGE_CURVE('',#188115,#188123,#188125,.T.); +#188123 = VERTEX_POINT('',#188124); +#188124 = CARTESIAN_POINT('',(84.605344,-88.290477,1.585)); +#188125 = CIRCLE('',#188126,0.536602209951); +#188126 = AXIS2_PLACEMENT_3D('',#188127,#188128,#188129); +#188127 = CARTESIAN_POINT('',(84.743268433983,-87.77190320367,1.585)); +#188128 = DIRECTION('',(0.,0.,1.)); +#188129 = DIRECTION('',(-0.966401972198,-0.257035460845,0.)); +#188130 = ORIENTED_EDGE('',*,*,#188131,.T.); +#188131 = EDGE_CURVE('',#188123,#188088,#188132,.T.); +#188132 = LINE('',#188133,#188134); +#188133 = CARTESIAN_POINT('',(84.605344,-88.290477,1.585)); +#188134 = VECTOR('',#188135,1.); +#188135 = DIRECTION('',(1.,0.,0.)); +#188136 = PLANE('',#188137); +#188137 = AXIS2_PLACEMENT_3D('',#188138,#188139,#188140); +#188138 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188139 = DIRECTION('',(0.,0.,1.)); +#188140 = DIRECTION('',(1.,0.,-0.)); +#188141 = SHELL_BASED_SURFACE_MODEL('',(#188142)); +#188142 = OPEN_SHELL('',(#188143)); +#188143 = ADVANCED_FACE('',(#188144,#188155),#188166,.T.); +#188144 = FACE_BOUND('',#188145,.T.); +#188145 = EDGE_LOOP('',(#188146)); +#188146 = ORIENTED_EDGE('',*,*,#188147,.T.); +#188147 = EDGE_CURVE('',#188148,#188148,#188150,.T.); +#188148 = VERTEX_POINT('',#188149); +#188149 = CARTESIAN_POINT('',(128.70165,-87.3231,1.585)); +#188150 = CIRCLE('',#188151,1.01); +#188151 = AXIS2_PLACEMENT_3D('',#188152,#188153,#188154); +#188152 = CARTESIAN_POINT('',(127.69165,-87.3231,1.585)); +#188153 = DIRECTION('',(0.,0.,1.)); +#188154 = DIRECTION('',(1.,0.,-0.)); +#188155 = FACE_BOUND('',#188156,.F.); +#188156 = EDGE_LOOP('',(#188157)); +#188157 = ORIENTED_EDGE('',*,*,#188158,.T.); +#188158 = EDGE_CURVE('',#188159,#188159,#188161,.T.); +#188159 = VERTEX_POINT('',#188160); +#188160 = CARTESIAN_POINT('',(128.585955,-87.3231,1.585)); +#188161 = CIRCLE('',#188162,0.894305); +#188162 = AXIS2_PLACEMENT_3D('',#188163,#188164,#188165); +#188163 = CARTESIAN_POINT('',(127.69165,-87.3231,1.585)); +#188164 = DIRECTION('',(0.,0.,1.)); +#188165 = DIRECTION('',(1.,0.,-0.)); +#188166 = PLANE('',#188167); +#188167 = AXIS2_PLACEMENT_3D('',#188168,#188169,#188170); +#188168 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188169 = DIRECTION('',(0.,0.,1.)); +#188170 = DIRECTION('',(1.,0.,-0.)); +#188171 = SHELL_BASED_SURFACE_MODEL('',(#188172)); +#188172 = OPEN_SHELL('',(#188173)); +#188173 = ADVANCED_FACE('',(#188174),#188259,.T.); +#188174 = FACE_BOUND('',#188175,.F.); +#188175 = EDGE_LOOP('',(#188176,#188187,#188195,#188203,#188212,#188220, + #188228,#188237,#188245,#188253)); +#188176 = ORIENTED_EDGE('',*,*,#188177,.T.); +#188177 = EDGE_CURVE('',#188178,#188180,#188182,.T.); +#188178 = VERTEX_POINT('',#188179); +#188179 = CARTESIAN_POINT('',(185.009287,-86.400686,1.585)); +#188180 = VERTEX_POINT('',#188181); +#188181 = CARTESIAN_POINT('',(185.178286,-86.470688,1.585)); +#188182 = CIRCLE('',#188183,0.109999394362); +#188183 = AXIS2_PLACEMENT_3D('',#188184,#188185,#188186); +#188184 = CARTESIAN_POINT('',(185.0704,-86.49214674562,1.585)); +#188185 = DIRECTION('',(0.,0.,-1.)); +#188186 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#188187 = ORIENTED_EDGE('',*,*,#188188,.T.); +#188188 = EDGE_CURVE('',#188180,#188189,#188191,.T.); +#188189 = VERTEX_POINT('',#188190); +#188190 = CARTESIAN_POINT('',(185.1804,-86.839291,1.585)); +#188191 = LINE('',#188192,#188193); +#188192 = CARTESIAN_POINT('',(185.178286,-86.470688,1.585)); +#188193 = VECTOR('',#188194,1.); +#188194 = DIRECTION('',(5.735073327767E-03,-0.999983554332,0.)); +#188195 = ORIENTED_EDGE('',*,*,#188196,.T.); +#188196 = EDGE_CURVE('',#188189,#188197,#188199,.T.); +#188197 = VERTEX_POINT('',#188198); +#188198 = CARTESIAN_POINT('',(186.69186,-86.841405,1.585)); +#188199 = LINE('',#188200,#188201); +#188200 = CARTESIAN_POINT('',(185.1804,-86.839291,1.585)); +#188201 = VECTOR('',#188202,1.); +#188202 = DIRECTION('',(0.999999021894,-1.39864629714E-03,0.)); +#188203 = ORIENTED_EDGE('',*,*,#188204,.T.); +#188204 = EDGE_CURVE('',#188197,#188205,#188207,.T.); +#188205 = VERTEX_POINT('',#188206); +#188206 = CARTESIAN_POINT('',(186.69186,-87.057177,1.585)); +#188207 = CIRCLE('',#188208,0.109999639072); +#188208 = AXIS2_PLACEMENT_3D('',#188209,#188210,#188211); +#188209 = CARTESIAN_POINT('',(186.6704,-86.949291,1.585)); +#188210 = DIRECTION('',(0.,0.,-1.)); +#188211 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#188212 = ORIENTED_EDGE('',*,*,#188213,.T.); +#188213 = EDGE_CURVE('',#188205,#188214,#188216,.T.); +#188214 = VERTEX_POINT('',#188215); +#188215 = CARTESIAN_POINT('',(185.1804,-87.059291,1.585)); +#188216 = LINE('',#188217,#188218); +#188217 = CARTESIAN_POINT('',(186.69186,-87.057177,1.585)); +#188218 = VECTOR('',#188219,1.); +#188219 = DIRECTION('',(-0.999999021894,-1.398646297149E-03,0.)); +#188220 = ORIENTED_EDGE('',*,*,#188221,.T.); +#188221 = EDGE_CURVE('',#188214,#188222,#188224,.T.); +#188222 = VERTEX_POINT('',#188223); +#188223 = CARTESIAN_POINT('',(185.178286,-87.427894,1.585)); +#188224 = LINE('',#188225,#188226); +#188225 = CARTESIAN_POINT('',(185.1804,-87.059291,1.585)); +#188226 = VECTOR('',#188227,1.); +#188227 = DIRECTION('',(-5.735073327767E-03,-0.999983554332,0.)); +#188228 = ORIENTED_EDGE('',*,*,#188229,.T.); +#188229 = EDGE_CURVE('',#188222,#188230,#188232,.T.); +#188230 = VERTEX_POINT('',#188231); +#188231 = CARTESIAN_POINT('',(184.962514,-87.427894,1.585)); +#188232 = CIRCLE('',#188233,0.109999639072); +#188233 = AXIS2_PLACEMENT_3D('',#188234,#188235,#188236); +#188234 = CARTESIAN_POINT('',(185.0704,-87.406434,1.585)); +#188235 = DIRECTION('',(-0.,0.,-1.)); +#188236 = DIRECTION('',(0.980785036297,-0.195091549218,-0.)); +#188237 = ORIENTED_EDGE('',*,*,#188238,.T.); +#188238 = EDGE_CURVE('',#188230,#188239,#188241,.T.); +#188239 = VERTEX_POINT('',#188240); +#188240 = CARTESIAN_POINT('',(184.962514,-86.470688,1.585)); +#188241 = LINE('',#188242,#188243); +#188242 = CARTESIAN_POINT('',(184.962514,-87.427894,1.585)); +#188243 = VECTOR('',#188244,1.); +#188244 = DIRECTION('',(0.,1.,0.)); +#188245 = ORIENTED_EDGE('',*,*,#188246,.T.); +#188246 = EDGE_CURVE('',#188239,#188247,#188249,.T.); +#188247 = VERTEX_POINT('',#188248); +#188248 = CARTESIAN_POINT('',(184.978938,-86.431035,1.585)); +#188249 = LINE('',#188250,#188251); +#188250 = CARTESIAN_POINT('',(184.962514,-86.470688,1.585)); +#188251 = VECTOR('',#188252,1.); +#188252 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#188253 = ORIENTED_EDGE('',*,*,#188254,.T.); +#188254 = EDGE_CURVE('',#188247,#188178,#188255,.T.); +#188255 = LINE('',#188256,#188257); +#188256 = CARTESIAN_POINT('',(184.978938,-86.431035,1.585)); +#188257 = VECTOR('',#188258,1.); +#188258 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#188259 = PLANE('',#188260); +#188260 = AXIS2_PLACEMENT_3D('',#188261,#188262,#188263); +#188261 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188262 = DIRECTION('',(0.,0.,1.)); +#188263 = DIRECTION('',(1.,0.,-0.)); +#188264 = SHELL_BASED_SURFACE_MODEL('',(#188265)); +#188265 = OPEN_SHELL('',(#188266)); +#188266 = ADVANCED_FACE('',(#188267),#188303,.T.); +#188267 = FACE_BOUND('',#188268,.F.); +#188268 = EDGE_LOOP('',(#188269,#188280,#188288,#188297)); +#188269 = ORIENTED_EDGE('',*,*,#188270,.T.); +#188270 = EDGE_CURVE('',#188271,#188273,#188275,.T.); +#188271 = VERTEX_POINT('',#188272); +#188272 = CARTESIAN_POINT('',(99.464586,-87.4731,1.585)); +#188273 = VERTEX_POINT('',#188274); +#188274 = CARTESIAN_POINT('',(99.464586,-87.3531,1.585)); +#188275 = CIRCLE('',#188276,6.000000000043E-02); +#188276 = AXIS2_PLACEMENT_3D('',#188277,#188278,#188279); +#188277 = CARTESIAN_POINT('',(99.464585774412,-87.4131,1.585)); +#188278 = DIRECTION('',(0.,0.,-1.)); +#188279 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#188280 = ORIENTED_EDGE('',*,*,#188281,.T.); +#188281 = EDGE_CURVE('',#188273,#188282,#188284,.T.); +#188282 = VERTEX_POINT('',#188283); +#188283 = CARTESIAN_POINT('',(100.918714,-87.3531,1.585)); +#188284 = LINE('',#188285,#188286); +#188285 = CARTESIAN_POINT('',(99.464586,-87.3531,1.585)); +#188286 = VECTOR('',#188287,1.); +#188287 = DIRECTION('',(1.,0.,0.)); +#188288 = ORIENTED_EDGE('',*,*,#188289,.T.); +#188289 = EDGE_CURVE('',#188282,#188290,#188292,.T.); +#188290 = VERTEX_POINT('',#188291); +#188291 = CARTESIAN_POINT('',(100.918714,-87.4731,1.585)); +#188292 = CIRCLE('',#188293,6.000000000043E-02); +#188293 = AXIS2_PLACEMENT_3D('',#188294,#188295,#188296); +#188294 = CARTESIAN_POINT('',(100.91871422558,-87.4131,1.585)); +#188295 = DIRECTION('',(0.,0.,-1.)); +#188296 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#188297 = ORIENTED_EDGE('',*,*,#188298,.T.); +#188298 = EDGE_CURVE('',#188290,#188271,#188299,.T.); +#188299 = LINE('',#188300,#188301); +#188300 = CARTESIAN_POINT('',(100.918714,-87.4731,1.585)); +#188301 = VECTOR('',#188302,1.); +#188302 = DIRECTION('',(-1.,0.,0.)); +#188303 = PLANE('',#188304); +#188304 = AXIS2_PLACEMENT_3D('',#188305,#188306,#188307); +#188305 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188306 = DIRECTION('',(0.,0.,1.)); +#188307 = DIRECTION('',(1.,0.,-0.)); +#188308 = SHELL_BASED_SURFACE_MODEL('',(#188309)); +#188309 = OPEN_SHELL('',(#188310)); +#188310 = ADVANCED_FACE('',(#188311,#188437,#188504),#188556,.T.); +#188311 = FACE_BOUND('',#188312,.F.); +#188312 = EDGE_LOOP('',(#188313,#188324,#188332,#188340,#188348,#188356, + #188365,#188373,#188381,#188390,#188398,#188406,#188414,#188422, + #188431)); +#188313 = ORIENTED_EDGE('',*,*,#188314,.T.); +#188314 = EDGE_CURVE('',#188315,#188317,#188319,.T.); +#188315 = VERTEX_POINT('',#188316); +#188316 = CARTESIAN_POINT('',(170.992142,-86.409597,1.585)); +#188317 = VERTEX_POINT('',#188318); +#188318 = CARTESIAN_POINT('',(171.057142,-86.344597,1.585)); +#188319 = CIRCLE('',#188320,6.500103935384E-02); +#188320 = AXIS2_PLACEMENT_3D('',#188321,#188322,#188323); +#188321 = CARTESIAN_POINT('',(171.05714303934,-86.40959803934,1.585)); +#188322 = DIRECTION('',(0.,0.,-1.)); +#188323 = DIRECTION('',(-0.999999999872,1.598967539908E-05,0.)); +#188324 = ORIENTED_EDGE('',*,*,#188325,.T.); +#188325 = EDGE_CURVE('',#188317,#188326,#188328,.T.); +#188326 = VERTEX_POINT('',#188327); +#188327 = CARTESIAN_POINT('',(171.360335,-86.345232,1.585)); +#188328 = LINE('',#188329,#188330); +#188329 = CARTESIAN_POINT('',(171.057142,-86.344597,1.585)); +#188330 = VECTOR('',#188331,1.); +#188331 = DIRECTION('',(0.999997806803,-2.094370936408E-03,0.)); +#188332 = ORIENTED_EDGE('',*,*,#188333,.T.); +#188333 = EDGE_CURVE('',#188326,#188334,#188336,.T.); +#188334 = VERTEX_POINT('',#188335); +#188335 = CARTESIAN_POINT('',(171.386211,-86.351459,1.585)); +#188336 = LINE('',#188337,#188338); +#188337 = CARTESIAN_POINT('',(171.360335,-86.345232,1.585)); +#188338 = VECTOR('',#188339,1.); +#188339 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#188340 = ORIENTED_EDGE('',*,*,#188341,.T.); +#188341 = EDGE_CURVE('',#188334,#188342,#188344,.T.); +#188342 = VERTEX_POINT('',#188343); +#188343 = CARTESIAN_POINT('',(171.488819,-86.406492,1.585)); +#188344 = LINE('',#188345,#188346); +#188345 = CARTESIAN_POINT('',(171.386211,-86.351459,1.585)); +#188346 = VECTOR('',#188347,1.); +#188347 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#188348 = ORIENTED_EDGE('',*,*,#188349,.T.); +#188349 = EDGE_CURVE('',#188342,#188350,#188352,.T.); +#188350 = VERTEX_POINT('',#188351); +#188351 = CARTESIAN_POINT('',(171.543852,-86.466242,1.585)); +#188352 = LINE('',#188353,#188354); +#188353 = CARTESIAN_POINT('',(171.488819,-86.406492,1.585)); +#188354 = VECTOR('',#188355,1.); +#188355 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#188356 = ORIENTED_EDGE('',*,*,#188357,.T.); +#188357 = EDGE_CURVE('',#188350,#188358,#188360,.T.); +#188358 = VERTEX_POINT('',#188359); +#188359 = CARTESIAN_POINT('',(171.537465,-86.789751,1.585)); +#188360 = CIRCLE('',#188361,0.260195634991); +#188361 = AXIS2_PLACEMENT_3D('',#188362,#188363,#188364); +#188362 = CARTESIAN_POINT('',(171.3369163306,-86.62397404239,1.585)); +#188363 = DIRECTION('',(0.,0.,-1.)); +#188364 = DIRECTION('',(0.795307997401,0.606205566842,0.)); +#188365 = ORIENTED_EDGE('',*,*,#188366,.T.); +#188366 = EDGE_CURVE('',#188358,#188367,#188369,.T.); +#188367 = VERTEX_POINT('',#188368); +#188368 = CARTESIAN_POINT('',(171.510589,-86.820973,1.585)); +#188369 = LINE('',#188370,#188371); +#188370 = CARTESIAN_POINT('',(171.537465,-86.789751,1.585)); +#188371 = VECTOR('',#188372,1.); +#188372 = DIRECTION('',(-0.652389160842,-0.757884148677,0.)); +#188373 = ORIENTED_EDGE('',*,*,#188374,.T.); +#188374 = EDGE_CURVE('',#188367,#188375,#188377,.T.); +#188375 = VERTEX_POINT('',#188376); +#188376 = CARTESIAN_POINT('',(171.531676,-86.835063,1.585)); +#188377 = LINE('',#188378,#188379); +#188378 = CARTESIAN_POINT('',(171.510589,-86.820973,1.585)); +#188379 = VECTOR('',#188380,1.); +#188380 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#188381 = ORIENTED_EDGE('',*,*,#188382,.T.); +#188382 = EDGE_CURVE('',#188375,#188383,#188385,.T.); +#188383 = VERTEX_POINT('',#188384); +#188384 = CARTESIAN_POINT('',(171.633512,-87.152824,1.585)); +#188385 = CIRCLE('',#188386,0.311668456373); +#188386 = AXIS2_PLACEMENT_3D('',#188387,#188388,#188389); +#188387 = CARTESIAN_POINT('',(171.33190146242,-87.07428540872,1.585)); +#188388 = DIRECTION('',(0.,0.,-1.)); +#188389 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#188390 = ORIENTED_EDGE('',*,*,#188391,.T.); +#188391 = EDGE_CURVE('',#188383,#188392,#188394,.T.); +#188392 = VERTEX_POINT('',#188393); +#188393 = CARTESIAN_POINT('',(171.580321,-87.26118,1.585)); +#188394 = LINE('',#188395,#188396); +#188395 = CARTESIAN_POINT('',(171.633512,-87.152824,1.585)); +#188396 = VECTOR('',#188397,1.); +#188397 = DIRECTION('',(-0.440660203323,-0.897673986037,0.)); +#188398 = ORIENTED_EDGE('',*,*,#188399,.T.); +#188399 = EDGE_CURVE('',#188392,#188400,#188402,.T.); +#188400 = VERTEX_POINT('',#188401); +#188401 = CARTESIAN_POINT('',(171.523021,-87.318484,1.585)); +#188402 = LINE('',#188403,#188404); +#188403 = CARTESIAN_POINT('',(171.580321,-87.26118,1.585)); +#188404 = VECTOR('',#188405,1.); +#188405 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#188406 = ORIENTED_EDGE('',*,*,#188407,.T.); +#188407 = EDGE_CURVE('',#188400,#188408,#188410,.T.); +#188408 = VERTEX_POINT('',#188409); +#188409 = CARTESIAN_POINT('',(171.414655,-87.371681,1.585)); +#188410 = LINE('',#188411,#188412); +#188411 = CARTESIAN_POINT('',(171.523021,-87.318484,1.585)); +#188412 = VECTOR('',#188413,1.); +#188413 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#188414 = ORIENTED_EDGE('',*,*,#188415,.T.); +#188415 = EDGE_CURVE('',#188408,#188416,#188418,.T.); +#188416 = VERTEX_POINT('',#188417); +#188417 = CARTESIAN_POINT('',(171.057142,-87.374597,1.585)); +#188418 = LINE('',#188419,#188420); +#188419 = CARTESIAN_POINT('',(171.414655,-87.371681,1.585)); +#188420 = VECTOR('',#188421,1.); +#188421 = DIRECTION('',(-0.999966738663,-8.156075471217E-03,0.)); +#188422 = ORIENTED_EDGE('',*,*,#188423,.T.); +#188423 = EDGE_CURVE('',#188416,#188424,#188426,.T.); +#188424 = VERTEX_POINT('',#188425); +#188425 = CARTESIAN_POINT('',(170.992142,-87.309597,1.585)); +#188426 = CIRCLE('',#188427,6.500103935387E-02); +#188427 = AXIS2_PLACEMENT_3D('',#188428,#188429,#188430); +#188428 = CARTESIAN_POINT('',(171.05714303934,-87.30959596065,1.585)); +#188429 = DIRECTION('',(0.,0.,-1.)); +#188430 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#188431 = ORIENTED_EDGE('',*,*,#188432,.T.); +#188432 = EDGE_CURVE('',#188424,#188315,#188433,.T.); +#188433 = LINE('',#188434,#188435); +#188434 = CARTESIAN_POINT('',(170.992142,-87.309597,1.585)); +#188435 = VECTOR('',#188436,1.); +#188436 = DIRECTION('',(0.,1.,0.)); +#188437 = FACE_BOUND('',#188438,.F.); +#188438 = EDGE_LOOP('',(#188439,#188449,#188457,#188465,#188473,#188482, + #188490,#188498)); +#188439 = ORIENTED_EDGE('',*,*,#188440,.T.); +#188440 = EDGE_CURVE('',#188441,#188443,#188445,.T.); +#188441 = VERTEX_POINT('',#188442); +#188442 = CARTESIAN_POINT('',(171.450602,-86.937837,1.585)); +#188443 = VERTEX_POINT('',#188444); +#188444 = CARTESIAN_POINT('',(171.346595,-86.903168,1.585)); +#188445 = LINE('',#188446,#188447); +#188446 = CARTESIAN_POINT('',(171.450602,-86.937837,1.585)); +#188447 = VECTOR('',#188448,1.); +#188448 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#188449 = ORIENTED_EDGE('',*,*,#188450,.T.); +#188450 = EDGE_CURVE('',#188443,#188451,#188453,.T.); +#188451 = VERTEX_POINT('',#188452); +#188452 = CARTESIAN_POINT('',(171.122142,-86.903168,1.585)); +#188453 = LINE('',#188454,#188455); +#188454 = CARTESIAN_POINT('',(171.346595,-86.903168,1.585)); +#188455 = VECTOR('',#188456,1.); +#188456 = DIRECTION('',(-1.,0.,0.)); +#188457 = ORIENTED_EDGE('',*,*,#188458,.T.); +#188458 = EDGE_CURVE('',#188451,#188459,#188461,.T.); +#188459 = VERTEX_POINT('',#188460); +#188460 = CARTESIAN_POINT('',(171.122142,-87.244597,1.585)); +#188461 = LINE('',#188462,#188463); +#188462 = CARTESIAN_POINT('',(171.122142,-86.903168,1.585)); +#188463 = VECTOR('',#188464,1.); +#188464 = DIRECTION('',(0.,-1.,0.)); +#188465 = ORIENTED_EDGE('',*,*,#188466,.T.); +#188466 = EDGE_CURVE('',#188459,#188467,#188469,.T.); +#188467 = VERTEX_POINT('',#188468); +#188468 = CARTESIAN_POINT('',(171.384654,-87.244597,1.585)); +#188469 = LINE('',#188470,#188471); +#188470 = CARTESIAN_POINT('',(171.122142,-87.244597,1.585)); +#188471 = VECTOR('',#188472,1.); +#188472 = DIRECTION('',(1.,0.,0.)); +#188473 = ORIENTED_EDGE('',*,*,#188474,.T.); +#188474 = EDGE_CURVE('',#188467,#188475,#188477,.T.); +#188475 = VERTEX_POINT('',#188476); +#188476 = CARTESIAN_POINT('',(171.506428,-87.122823,1.585)); +#188477 = CIRCLE('',#188478,0.170996196456); +#188478 = AXIS2_PLACEMENT_3D('',#188479,#188480,#188481); +#188479 = CARTESIAN_POINT('',(171.3410775,-87.0792465,1.585)); +#188480 = DIRECTION('',(0.,0.,1.)); +#188481 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#188482 = ORIENTED_EDGE('',*,*,#188483,.T.); +#188483 = EDGE_CURVE('',#188475,#188484,#188486,.T.); +#188484 = VERTEX_POINT('',#188485); +#188485 = CARTESIAN_POINT('',(171.506428,-87.024941,1.585)); +#188486 = LINE('',#188487,#188488); +#188487 = CARTESIAN_POINT('',(171.506428,-87.122823,1.585)); +#188488 = VECTOR('',#188489,1.); +#188489 = DIRECTION('',(0.,1.,0.)); +#188490 = ORIENTED_EDGE('',*,*,#188491,.T.); +#188491 = EDGE_CURVE('',#188484,#188492,#188494,.T.); +#188492 = VERTEX_POINT('',#188493); +#188493 = CARTESIAN_POINT('',(171.475149,-86.962384,1.585)); +#188494 = LINE('',#188495,#188496); +#188495 = CARTESIAN_POINT('',(171.506428,-87.024941,1.585)); +#188496 = VECTOR('',#188497,1.); +#188497 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#188498 = ORIENTED_EDGE('',*,*,#188499,.T.); +#188499 = EDGE_CURVE('',#188492,#188441,#188500,.T.); +#188500 = LINE('',#188501,#188502); +#188501 = CARTESIAN_POINT('',(171.475149,-86.962384,1.585)); +#188502 = VECTOR('',#188503,1.); +#188503 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#188504 = FACE_BOUND('',#188505,.F.); +#188505 = EDGE_LOOP('',(#188506,#188517,#188525,#188533,#188541,#188550) + ); +#188506 = ORIENTED_EDGE('',*,*,#188507,.T.); +#188507 = EDGE_CURVE('',#188508,#188510,#188512,.T.); +#188508 = VERTEX_POINT('',#188509); +#188509 = CARTESIAN_POINT('',(171.463571,-86.59637,1.585)); +#188510 = VERTEX_POINT('',#188511); +#188511 = CARTESIAN_POINT('',(171.341797,-86.474597,1.585)); +#188512 = CIRCLE('',#188513,0.170996278941); +#188513 = AXIS2_PLACEMENT_3D('',#188514,#188515,#188516); +#188514 = CARTESIAN_POINT('',(171.2982207157,-86.63994764214,1.585)); +#188515 = DIRECTION('',(0.,0.,1.)); +#188516 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#188517 = ORIENTED_EDGE('',*,*,#188518,.T.); +#188518 = EDGE_CURVE('',#188510,#188519,#188521,.T.); +#188519 = VERTEX_POINT('',#188520); +#188520 = CARTESIAN_POINT('',(171.122142,-86.474597,1.585)); +#188521 = LINE('',#188522,#188523); +#188522 = CARTESIAN_POINT('',(171.341797,-86.474597,1.585)); +#188523 = VECTOR('',#188524,1.); +#188524 = DIRECTION('',(-1.,0.,0.)); +#188525 = ORIENTED_EDGE('',*,*,#188526,.T.); +#188526 = EDGE_CURVE('',#188519,#188527,#188529,.T.); +#188527 = VERTEX_POINT('',#188528); +#188528 = CARTESIAN_POINT('',(171.122142,-86.773168,1.585)); +#188529 = LINE('',#188530,#188531); +#188530 = CARTESIAN_POINT('',(171.122142,-86.474597,1.585)); +#188531 = VECTOR('',#188532,1.); +#188532 = DIRECTION('',(0.,-1.,0.)); +#188533 = ORIENTED_EDGE('',*,*,#188534,.T.); +#188534 = EDGE_CURVE('',#188527,#188535,#188537,.T.); +#188535 = VERTEX_POINT('',#188536); +#188536 = CARTESIAN_POINT('',(171.341797,-86.773168,1.585)); +#188537 = LINE('',#188538,#188539); +#188538 = CARTESIAN_POINT('',(171.122142,-86.773168,1.585)); +#188539 = VECTOR('',#188540,1.); +#188540 = DIRECTION('',(1.,0.,0.)); +#188541 = ORIENTED_EDGE('',*,*,#188542,.T.); +#188542 = EDGE_CURVE('',#188535,#188543,#188545,.T.); +#188543 = VERTEX_POINT('',#188544); +#188544 = CARTESIAN_POINT('',(171.463571,-86.651395,1.585)); +#188545 = CIRCLE('',#188546,0.171001125777); +#188546 = AXIS2_PLACEMENT_3D('',#188547,#188548,#188549); +#188547 = CARTESIAN_POINT('',(171.29821674885,-86.60781339097,1.585)); +#188548 = DIRECTION('',(0.,0.,1.)); +#188549 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#188550 = ORIENTED_EDGE('',*,*,#188551,.T.); +#188551 = EDGE_CURVE('',#188543,#188508,#188552,.T.); +#188552 = LINE('',#188553,#188554); +#188553 = CARTESIAN_POINT('',(171.463571,-86.651395,1.585)); +#188554 = VECTOR('',#188555,1.); +#188555 = DIRECTION('',(0.,1.,0.)); +#188556 = PLANE('',#188557); +#188557 = AXIS2_PLACEMENT_3D('',#188558,#188559,#188560); +#188558 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188559 = DIRECTION('',(0.,0.,1.)); +#188560 = DIRECTION('',(1.,0.,-0.)); +#188561 = SHELL_BASED_SURFACE_MODEL('',(#188562)); +#188562 = OPEN_SHELL('',(#188563)); +#188563 = ADVANCED_FACE('',(#188564),#188828,.T.); +#188564 = FACE_BOUND('',#188565,.F.); +#188565 = EDGE_LOOP('',(#188566,#188576,#188584,#188592,#188601,#188609, + #188617,#188626,#188634,#188642,#188650,#188658,#188666,#188674, + #188682,#188691,#188699,#188707,#188715,#188723,#188732,#188740, + #188748,#188757,#188765,#188773,#188781,#188789,#188797,#188805, + #188813,#188822)); +#188566 = ORIENTED_EDGE('',*,*,#188567,.T.); +#188567 = EDGE_CURVE('',#188568,#188570,#188572,.T.); +#188568 = VERTEX_POINT('',#188569); +#188569 = CARTESIAN_POINT('',(170.205558,-86.400702,1.585)); +#188570 = VERTEX_POINT('',#188571); +#188571 = CARTESIAN_POINT('',(170.313914,-86.347512,1.585)); +#188572 = LINE('',#188573,#188574); +#188573 = CARTESIAN_POINT('',(170.205558,-86.400702,1.585)); +#188574 = VECTOR('',#188575,1.); +#188575 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#188576 = ORIENTED_EDGE('',*,*,#188577,.T.); +#188577 = EDGE_CURVE('',#188570,#188578,#188580,.T.); +#188578 = VERTEX_POINT('',#188579); +#188579 = CARTESIAN_POINT('',(170.553078,-86.34663,1.585)); +#188580 = LINE('',#188581,#188582); +#188581 = CARTESIAN_POINT('',(170.313914,-86.347512,1.585)); +#188582 = VECTOR('',#188583,1.); +#188583 = DIRECTION('',(0.999993199965,3.687820919367E-03,0.)); +#188584 = ORIENTED_EDGE('',*,*,#188585,.T.); +#188585 = EDGE_CURVE('',#188578,#188586,#188588,.T.); +#188586 = VERTEX_POINT('',#188587); +#188587 = CARTESIAN_POINT('',(170.691983,-86.39079,1.585)); +#188588 = LINE('',#188589,#188590); +#188589 = CARTESIAN_POINT('',(170.553078,-86.34663,1.585)); +#188590 = VECTOR('',#188591,1.); +#188591 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#188592 = ORIENTED_EDGE('',*,*,#188593,.T.); +#188593 = EDGE_CURVE('',#188586,#188594,#188596,.T.); +#188594 = VERTEX_POINT('',#188595); +#188595 = CARTESIAN_POINT('',(170.650874,-86.514119,1.585)); +#188596 = CIRCLE('',#188597,6.499998485858E-02); +#188597 = AXIS2_PLACEMENT_3D('',#188598,#188599,#188600); +#188598 = CARTESIAN_POINT('',(170.67142749751,-86.45245416584,1.585)); +#188599 = DIRECTION('',(0.,0.,-1.)); +#188600 = DIRECTION('',(0.316238573437,0.948679695509,0.)); +#188601 = ORIENTED_EDGE('',*,*,#188602,.T.); +#188602 = EDGE_CURVE('',#188594,#188603,#188605,.T.); +#188603 = VERTEX_POINT('',#188604); +#188604 = CARTESIAN_POINT('',(170.532309,-86.474597,1.585)); +#188605 = LINE('',#188606,#188607); +#188606 = CARTESIAN_POINT('',(170.650874,-86.514119,1.585)); +#188607 = VECTOR('',#188608,1.); +#188608 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#188609 = ORIENTED_EDGE('',*,*,#188610,.T.); +#188610 = EDGE_CURVE('',#188603,#188611,#188613,.T.); +#188611 = VERTEX_POINT('',#188612); +#188612 = CARTESIAN_POINT('',(170.343916,-86.474597,1.585)); +#188613 = LINE('',#188614,#188615); +#188614 = CARTESIAN_POINT('',(170.532309,-86.474597,1.585)); +#188615 = VECTOR('',#188616,1.); +#188616 = DIRECTION('',(-1.,0.,0.)); +#188617 = ORIENTED_EDGE('',*,*,#188618,.T.); +#188618 = EDGE_CURVE('',#188611,#188619,#188621,.T.); +#188619 = VERTEX_POINT('',#188620); +#188620 = CARTESIAN_POINT('',(170.222142,-86.59637,1.585)); +#188621 = CIRCLE('',#188622,0.170991742693); +#188622 = AXIS2_PLACEMENT_3D('',#188623,#188624,#188625); +#188623 = CARTESIAN_POINT('',(170.38748857161,-86.63994392943,1.585)); +#188624 = DIRECTION('',(0.,0.,1.)); +#188625 = DIRECTION('',(-0.254822665256,0.966987802028,0.)); +#188626 = ORIENTED_EDGE('',*,*,#188627,.T.); +#188627 = EDGE_CURVE('',#188619,#188628,#188630,.T.); +#188628 = VERTEX_POINT('',#188629); +#188629 = CARTESIAN_POINT('',(170.222142,-86.651395,1.585)); +#188630 = LINE('',#188631,#188632); +#188631 = CARTESIAN_POINT('',(170.222142,-86.59637,1.585)); +#188632 = VECTOR('',#188633,1.); +#188633 = DIRECTION('',(0.,-1.,0.)); +#188634 = ORIENTED_EDGE('',*,*,#188635,.T.); +#188635 = EDGE_CURVE('',#188628,#188636,#188638,.T.); +#188636 = VERTEX_POINT('',#188637); +#188637 = CARTESIAN_POINT('',(170.25342,-86.713951,1.585)); +#188638 = LINE('',#188639,#188640); +#188639 = CARTESIAN_POINT('',(170.222142,-86.651395,1.585)); +#188640 = VECTOR('',#188641,1.); +#188641 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#188642 = ORIENTED_EDGE('',*,*,#188643,.T.); +#188643 = EDGE_CURVE('',#188636,#188644,#188646,.T.); +#188644 = VERTEX_POINT('',#188645); +#188645 = CARTESIAN_POINT('',(170.281358,-86.741889,1.585)); +#188646 = LINE('',#188647,#188648); +#188647 = CARTESIAN_POINT('',(170.25342,-86.713951,1.585)); +#188648 = VECTOR('',#188649,1.); +#188649 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#188650 = ORIENTED_EDGE('',*,*,#188651,.T.); +#188651 = EDGE_CURVE('',#188644,#188652,#188654,.T.); +#188652 = VERTEX_POINT('',#188653); +#188653 = CARTESIAN_POINT('',(170.351259,-86.776839,1.585)); +#188654 = LINE('',#188655,#188656); +#188655 = CARTESIAN_POINT('',(170.281358,-86.741889,1.585)); +#188656 = VECTOR('',#188657,1.); +#188657 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#188658 = ORIENTED_EDGE('',*,*,#188659,.T.); +#188659 = EDGE_CURVE('',#188652,#188660,#188662,.T.); +#188660 = VERTEX_POINT('',#188661); +#188661 = CARTESIAN_POINT('',(170.529068,-86.822887,1.585)); +#188662 = LINE('',#188663,#188664); +#188663 = CARTESIAN_POINT('',(170.351259,-86.776839,1.585)); +#188664 = VECTOR('',#188665,1.); +#188665 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#188666 = ORIENTED_EDGE('',*,*,#188667,.T.); +#188667 = EDGE_CURVE('',#188660,#188668,#188670,.T.); +#188668 = VERTEX_POINT('',#188669); +#188669 = CARTESIAN_POINT('',(170.631676,-86.877921,1.585)); +#188670 = LINE('',#188671,#188672); +#188671 = CARTESIAN_POINT('',(170.529068,-86.822887,1.585)); +#188672 = VECTOR('',#188673,1.); +#188673 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#188674 = ORIENTED_EDGE('',*,*,#188675,.T.); +#188675 = EDGE_CURVE('',#188668,#188676,#188678,.T.); +#188676 = VERTEX_POINT('',#188677); +#188677 = CARTESIAN_POINT('',(170.686709,-86.937671,1.585)); +#188678 = LINE('',#188679,#188680); +#188679 = CARTESIAN_POINT('',(170.631676,-86.877921,1.585)); +#188680 = VECTOR('',#188681,1.); +#188681 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#188682 = ORIENTED_EDGE('',*,*,#188683,.T.); +#188683 = EDGE_CURVE('',#188676,#188684,#188686,.T.); +#188684 = VERTEX_POINT('',#188685); +#188685 = CARTESIAN_POINT('',(170.680321,-87.26118,1.585)); +#188686 = CIRCLE('',#188687,0.260194262446); +#188687 = AXIS2_PLACEMENT_3D('',#188688,#188689,#188690); +#188688 = CARTESIAN_POINT('',(170.47977460304,-87.09540244761,1.585)); +#188689 = DIRECTION('',(0.,0.,-1.)); +#188690 = DIRECTION('',(0.795307302373,0.606206478678,0.)); +#188691 = ORIENTED_EDGE('',*,*,#188692,.T.); +#188692 = EDGE_CURVE('',#188684,#188693,#188695,.T.); +#188693 = VERTEX_POINT('',#188694); +#188694 = CARTESIAN_POINT('',(170.623021,-87.318484,1.585)); +#188695 = LINE('',#188696,#188697); +#188696 = CARTESIAN_POINT('',(170.680321,-87.26118,1.585)); +#188697 = VECTOR('',#188698,1.); +#188698 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#188699 = ORIENTED_EDGE('',*,*,#188700,.T.); +#188700 = EDGE_CURVE('',#188693,#188701,#188703,.T.); +#188701 = VERTEX_POINT('',#188702); +#188702 = CARTESIAN_POINT('',(170.514655,-87.371681,1.585)); +#188703 = LINE('',#188704,#188705); +#188704 = CARTESIAN_POINT('',(170.623021,-87.318484,1.585)); +#188705 = VECTOR('',#188706,1.); +#188706 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#188707 = ORIENTED_EDGE('',*,*,#188708,.T.); +#188708 = EDGE_CURVE('',#188701,#188709,#188711,.T.); +#188709 = VERTEX_POINT('',#188710); +#188710 = CARTESIAN_POINT('',(170.275498,-87.372564,1.585)); +#188711 = LINE('',#188712,#188713); +#188712 = CARTESIAN_POINT('',(170.514655,-87.371681,1.585)); +#188713 = VECTOR('',#188714,1.); +#188714 = DIRECTION('',(-0.999993184138,-3.692110126803E-03,0.)); +#188715 = ORIENTED_EDGE('',*,*,#188716,.T.); +#188716 = EDGE_CURVE('',#188709,#188717,#188719,.T.); +#188717 = VERTEX_POINT('',#188718); +#188718 = CARTESIAN_POINT('',(170.136587,-87.328404,1.585)); +#188719 = LINE('',#188720,#188721); +#188720 = CARTESIAN_POINT('',(170.275498,-87.372564,1.585)); +#188721 = VECTOR('',#188722,1.); +#188722 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#188723 = ORIENTED_EDGE('',*,*,#188724,.T.); +#188724 = EDGE_CURVE('',#188717,#188725,#188727,.T.); +#188725 = VERTEX_POINT('',#188726); +#188726 = CARTESIAN_POINT('',(170.177697,-87.205076,1.585)); +#188727 = CIRCLE('',#188728,6.499966862237E-02); +#188728 = AXIS2_PLACEMENT_3D('',#188729,#188730,#188731); +#188729 = CARTESIAN_POINT('',(170.15714212923,-87.26674004307,1.585)); +#188730 = DIRECTION('',(0.,0.,-1.)); +#188731 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#188732 = ORIENTED_EDGE('',*,*,#188733,.T.); +#188733 = EDGE_CURVE('',#188725,#188734,#188736,.T.); +#188734 = VERTEX_POINT('',#188735); +#188735 = CARTESIAN_POINT('',(170.296261,-87.244597,1.585)); +#188736 = LINE('',#188737,#188738); +#188737 = CARTESIAN_POINT('',(170.177697,-87.205076,1.585)); +#188738 = VECTOR('',#188739,1.); +#188739 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#188740 = ORIENTED_EDGE('',*,*,#188741,.T.); +#188741 = EDGE_CURVE('',#188734,#188742,#188744,.T.); +#188742 = VERTEX_POINT('',#188743); +#188743 = CARTESIAN_POINT('',(170.484654,-87.244597,1.585)); +#188744 = LINE('',#188745,#188746); +#188745 = CARTESIAN_POINT('',(170.296261,-87.244597,1.585)); +#188746 = VECTOR('',#188747,1.); +#188747 = DIRECTION('',(1.,0.,0.)); +#188748 = ORIENTED_EDGE('',*,*,#188749,.T.); +#188749 = EDGE_CURVE('',#188742,#188750,#188752,.T.); +#188750 = VERTEX_POINT('',#188751); +#188751 = CARTESIAN_POINT('',(170.606428,-87.122823,1.585)); +#188752 = CIRCLE('',#188753,0.170996196456); +#188753 = AXIS2_PLACEMENT_3D('',#188754,#188755,#188756); +#188754 = CARTESIAN_POINT('',(170.4410775,-87.0792465,1.585)); +#188755 = DIRECTION('',(0.,0.,1.)); +#188756 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#188757 = ORIENTED_EDGE('',*,*,#188758,.T.); +#188758 = EDGE_CURVE('',#188750,#188759,#188761,.T.); +#188759 = VERTEX_POINT('',#188760); +#188760 = CARTESIAN_POINT('',(170.606428,-87.067799,1.585)); +#188761 = LINE('',#188762,#188763); +#188762 = CARTESIAN_POINT('',(170.606428,-87.122823,1.585)); +#188763 = VECTOR('',#188764,1.); +#188764 = DIRECTION('',(0.,1.,0.)); +#188765 = ORIENTED_EDGE('',*,*,#188766,.T.); +#188766 = EDGE_CURVE('',#188759,#188767,#188769,.T.); +#188767 = VERTEX_POINT('',#188768); +#188768 = CARTESIAN_POINT('',(170.575149,-87.005242,1.585)); +#188769 = LINE('',#188770,#188771); +#188770 = CARTESIAN_POINT('',(170.606428,-87.067799,1.585)); +#188771 = VECTOR('',#188772,1.); +#188772 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#188773 = ORIENTED_EDGE('',*,*,#188774,.T.); +#188774 = EDGE_CURVE('',#188767,#188775,#188777,.T.); +#188775 = VERTEX_POINT('',#188776); +#188776 = CARTESIAN_POINT('',(170.547212,-86.977303,1.585)); +#188777 = LINE('',#188778,#188779); +#188778 = CARTESIAN_POINT('',(170.575149,-87.005242,1.585)); +#188779 = VECTOR('',#188780,1.); +#188780 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#188781 = ORIENTED_EDGE('',*,*,#188782,.T.); +#188782 = EDGE_CURVE('',#188775,#188783,#188785,.T.); +#188783 = VERTEX_POINT('',#188784); +#188784 = CARTESIAN_POINT('',(170.47731,-86.942353,1.585)); +#188785 = LINE('',#188786,#188787); +#188786 = CARTESIAN_POINT('',(170.547212,-86.977303,1.585)); +#188787 = VECTOR('',#188788,1.); +#188788 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#188789 = ORIENTED_EDGE('',*,*,#188790,.T.); +#188790 = EDGE_CURVE('',#188783,#188791,#188793,.T.); +#188791 = VERTEX_POINT('',#188792); +#188792 = CARTESIAN_POINT('',(170.299502,-86.896306,1.585)); +#188793 = LINE('',#188794,#188795); +#188794 = CARTESIAN_POINT('',(170.47731,-86.942353,1.585)); +#188795 = VECTOR('',#188796,1.); +#188796 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#188797 = ORIENTED_EDGE('',*,*,#188798,.T.); +#188798 = EDGE_CURVE('',#188791,#188799,#188801,.T.); +#188799 = VERTEX_POINT('',#188800); +#188800 = CARTESIAN_POINT('',(170.196894,-86.841273,1.585)); +#188801 = LINE('',#188802,#188803); +#188802 = CARTESIAN_POINT('',(170.299502,-86.896306,1.585)); +#188803 = VECTOR('',#188804,1.); +#188804 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#188805 = ORIENTED_EDGE('',*,*,#188806,.T.); +#188806 = EDGE_CURVE('',#188799,#188807,#188809,.T.); +#188807 = VERTEX_POINT('',#188808); +#188808 = CARTESIAN_POINT('',(170.141861,-86.781523,1.585)); +#188809 = LINE('',#188810,#188811); +#188810 = CARTESIAN_POINT('',(170.196894,-86.841273,1.585)); +#188811 = VECTOR('',#188812,1.); +#188812 = DIRECTION('',(-0.677476455829,0.73554445943,0.)); +#188813 = ORIENTED_EDGE('',*,*,#188814,.T.); +#188814 = EDGE_CURVE('',#188807,#188815,#188817,.T.); +#188815 = VERTEX_POINT('',#188816); +#188816 = CARTESIAN_POINT('',(170.148247,-86.458013,1.585)); +#188817 = CIRCLE('',#188818,0.260194992516); +#188818 = AXIS2_PLACEMENT_3D('',#188819,#188820,#188821); +#188819 = CARTESIAN_POINT('',(170.34879497292,-86.62378979176,1.585)); +#188820 = DIRECTION('',(0.,0.,-1.)); +#188821 = DIRECTION('',(-0.795303441168,-0.606211544319,-0.)); +#188822 = ORIENTED_EDGE('',*,*,#188823,.T.); +#188823 = EDGE_CURVE('',#188815,#188568,#188824,.T.); +#188824 = LINE('',#188825,#188826); +#188825 = CARTESIAN_POINT('',(170.148247,-86.458013,1.585)); +#188826 = VECTOR('',#188827,1.); +#188827 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#188828 = PLANE('',#188829); +#188829 = AXIS2_PLACEMENT_3D('',#188830,#188831,#188832); +#188830 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188831 = DIRECTION('',(0.,0.,1.)); +#188832 = DIRECTION('',(1.,0.,-0.)); +#188833 = SHELL_BASED_SURFACE_MODEL('',(#188834)); +#188834 = OPEN_SHELL('',(#188835)); +#188835 = ADVANCED_FACE('',(#188836),#188948,.T.); +#188836 = FACE_BOUND('',#188837,.F.); +#188837 = EDGE_LOOP('',(#188838,#188849,#188857,#188866,#188874,#188883, + #188891,#188900,#188908,#188917,#188925,#188934,#188942)); +#188838 = ORIENTED_EDGE('',*,*,#188839,.T.); +#188839 = EDGE_CURVE('',#188840,#188842,#188844,.T.); +#188840 = VERTEX_POINT('',#188841); +#188841 = CARTESIAN_POINT('',(169.19709,-86.384723,1.585)); +#188842 = VERTEX_POINT('',#188843); +#188843 = CARTESIAN_POINT('',(169.322142,-86.409597,1.585)); +#188844 = CIRCLE('',#188845,6.499988811648E-02); +#188845 = AXIS2_PLACEMENT_3D('',#188846,#188847,#188848); +#188846 = CARTESIAN_POINT('',(169.25714211188,-86.4095972701,1.585)); +#188847 = DIRECTION('',(0.,0.,-1.)); +#188848 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#188849 = ORIENTED_EDGE('',*,*,#188850,.T.); +#188850 = EDGE_CURVE('',#188842,#188851,#188853,.T.); +#188851 = VERTEX_POINT('',#188852); +#188852 = CARTESIAN_POINT('',(169.322142,-87.122823,1.585)); +#188853 = LINE('',#188854,#188855); +#188854 = CARTESIAN_POINT('',(169.322142,-86.409597,1.585)); +#188855 = VECTOR('',#188856,1.); +#188856 = DIRECTION('',(0.,-1.,0.)); +#188857 = ORIENTED_EDGE('',*,*,#188858,.T.); +#188858 = EDGE_CURVE('',#188851,#188859,#188861,.T.); +#188859 = VERTEX_POINT('',#188860); +#188860 = CARTESIAN_POINT('',(169.443916,-87.244597,1.585)); +#188861 = CIRCLE('',#188862,0.170999251022); +#188862 = AXIS2_PLACEMENT_3D('',#188863,#188864,#188865); +#188863 = CARTESIAN_POINT('',(169.487495,-87.079244,1.585)); +#188864 = DIRECTION('',(0.,0.,1.)); +#188865 = DIRECTION('',(-0.966980843553,-0.254849069452,0.)); +#188866 = ORIENTED_EDGE('',*,*,#188867,.T.); +#188867 = EDGE_CURVE('',#188859,#188868,#188870,.T.); +#188868 = VERTEX_POINT('',#188869); +#188869 = CARTESIAN_POINT('',(169.584654,-87.244597,1.585)); +#188870 = LINE('',#188871,#188872); +#188871 = CARTESIAN_POINT('',(169.443916,-87.244597,1.585)); +#188872 = VECTOR('',#188873,1.); +#188873 = DIRECTION('',(1.,0.,0.)); +#188874 = ORIENTED_EDGE('',*,*,#188875,.T.); +#188875 = EDGE_CURVE('',#188868,#188876,#188878,.T.); +#188876 = VERTEX_POINT('',#188877); +#188877 = CARTESIAN_POINT('',(169.706428,-87.122823,1.585)); +#188878 = CIRCLE('',#188879,0.170996196456); +#188879 = AXIS2_PLACEMENT_3D('',#188880,#188881,#188882); +#188880 = CARTESIAN_POINT('',(169.5410775,-87.0792465,1.585)); +#188881 = DIRECTION('',(0.,0.,1.)); +#188882 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#188883 = ORIENTED_EDGE('',*,*,#188884,.T.); +#188884 = EDGE_CURVE('',#188876,#188885,#188887,.T.); +#188885 = VERTEX_POINT('',#188886); +#188886 = CARTESIAN_POINT('',(169.706428,-86.409597,1.585)); +#188887 = LINE('',#188888,#188889); +#188888 = CARTESIAN_POINT('',(169.706428,-87.122823,1.585)); +#188889 = VECTOR('',#188890,1.); +#188890 = DIRECTION('',(0.,1.,0.)); +#188891 = ORIENTED_EDGE('',*,*,#188892,.T.); +#188892 = EDGE_CURVE('',#188885,#188893,#188895,.T.); +#188893 = VERTEX_POINT('',#188894); +#188894 = CARTESIAN_POINT('',(169.836428,-86.409597,1.585)); +#188895 = CIRCLE('',#188896,6.500000000093E-02); +#188896 = AXIS2_PLACEMENT_3D('',#188897,#188898,#188899); +#188897 = CARTESIAN_POINT('',(169.771428,-86.40959734486,1.585)); +#188898 = DIRECTION('',(0.,0.,-1.)); +#188899 = DIRECTION('',(-0.999999999986,5.305658244295E-06,0.)); +#188900 = ORIENTED_EDGE('',*,*,#188901,.T.); +#188901 = EDGE_CURVE('',#188893,#188902,#188904,.T.); +#188902 = VERTEX_POINT('',#188903); +#188903 = CARTESIAN_POINT('',(169.833512,-87.152824,1.585)); +#188904 = LINE('',#188905,#188906); +#188905 = CARTESIAN_POINT('',(169.836428,-86.409597,1.585)); +#188906 = VECTOR('',#188907,1.); +#188907 = DIRECTION('',(-3.923401002397E-03,-0.999992303433,0.)); +#188908 = ORIENTED_EDGE('',*,*,#188909,.T.); +#188909 = EDGE_CURVE('',#188902,#188910,#188912,.T.); +#188910 = VERTEX_POINT('',#188911); +#188911 = CARTESIAN_POINT('',(169.614655,-87.371681,1.585)); +#188912 = CIRCLE('',#188913,0.308111908981); +#188913 = AXIS2_PLACEMENT_3D('',#188914,#188915,#188916); +#188914 = CARTESIAN_POINT('',(169.53569061898,-87.07385961898,1.585)); +#188915 = DIRECTION('',(0.,0.,-1.)); +#188916 = DIRECTION('',(0.966601330004,-0.256284741712,0.)); +#188917 = ORIENTED_EDGE('',*,*,#188918,.T.); +#188918 = EDGE_CURVE('',#188910,#188919,#188921,.T.); +#188919 = VERTEX_POINT('',#188920); +#188920 = CARTESIAN_POINT('',(169.413914,-87.371681,1.585)); +#188921 = LINE('',#188922,#188923); +#188922 = CARTESIAN_POINT('',(169.614655,-87.371681,1.585)); +#188923 = VECTOR('',#188924,1.); +#188924 = DIRECTION('',(-1.,0.,0.)); +#188925 = ORIENTED_EDGE('',*,*,#188926,.T.); +#188926 = EDGE_CURVE('',#188919,#188927,#188929,.T.); +#188927 = VERTEX_POINT('',#188928); +#188928 = CARTESIAN_POINT('',(169.195057,-87.152824,1.585)); +#188929 = CIRCLE('',#188930,0.308110297261); +#188930 = AXIS2_PLACEMENT_3D('',#188931,#188932,#188933); +#188931 = CARTESIAN_POINT('',(169.49287706304,-87.07386093695,1.585)); +#188932 = DIRECTION('',(0.,0.,-1.)); +#188933 = DIRECTION('',(-0.256281804756,-0.966602108704,-0.)); +#188934 = ORIENTED_EDGE('',*,*,#188935,.T.); +#188935 = EDGE_CURVE('',#188927,#188936,#188938,.T.); +#188936 = VERTEX_POINT('',#188937); +#188937 = CARTESIAN_POINT('',(169.192142,-86.409597,1.585)); +#188938 = LINE('',#188939,#188940); +#188939 = CARTESIAN_POINT('',(169.195057,-87.152824,1.585)); +#188940 = VECTOR('',#188941,1.); +#188941 = DIRECTION('',(-3.922055549506E-03,0.999992308711,0.)); +#188942 = ORIENTED_EDGE('',*,*,#188943,.T.); +#188943 = EDGE_CURVE('',#188936,#188840,#188944,.T.); +#188944 = LINE('',#188945,#188946); +#188945 = CARTESIAN_POINT('',(169.192142,-86.409597,1.585)); +#188946 = VECTOR('',#188947,1.); +#188947 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#188948 = PLANE('',#188949); +#188949 = AXIS2_PLACEMENT_3D('',#188950,#188951,#188952); +#188950 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188951 = DIRECTION('',(0.,0.,1.)); +#188952 = DIRECTION('',(1.,0.,-0.)); +#188953 = SHELL_BASED_SURFACE_MODEL('',(#188954)); +#188954 = OPEN_SHELL('',(#188955)); +#188955 = ADVANCED_FACE('',(#188956),#189066,.T.); +#188956 = FACE_BOUND('',#188957,.F.); +#188957 = EDGE_LOOP('',(#188958,#188969,#188977,#188985,#188994,#189002, + #189010,#189019,#189027,#189035,#189044,#189052,#189060)); +#188958 = ORIENTED_EDGE('',*,*,#188959,.T.); +#188959 = EDGE_CURVE('',#188960,#188962,#188964,.T.); +#188960 = VERTEX_POINT('',#188961); +#188961 = CARTESIAN_POINT('',(172.239947,-86.599008,1.585)); +#188962 = VERTEX_POINT('',#188963); +#188963 = CARTESIAN_POINT('',(172.364999,-86.623882,1.585)); +#188964 = CIRCLE('',#188965,6.499988811649E-02); +#188965 = AXIS2_PLACEMENT_3D('',#188966,#188967,#188968); +#188966 = CARTESIAN_POINT('',(172.29999911188,-86.6238822701,1.585)); +#188967 = DIRECTION('',(0.,0.,-1.)); +#188968 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#188969 = ORIENTED_EDGE('',*,*,#188970,.T.); +#188970 = EDGE_CURVE('',#188962,#188971,#188973,.T.); +#188971 = VERTEX_POINT('',#188972); +#188972 = CARTESIAN_POINT('',(172.364999,-86.90174,1.585)); +#188973 = LINE('',#188974,#188975); +#188974 = CARTESIAN_POINT('',(172.364999,-86.623882,1.585)); +#188975 = VECTOR('',#188976,1.); +#188976 = DIRECTION('',(0.,-1.,0.)); +#188977 = ORIENTED_EDGE('',*,*,#188978,.T.); +#188978 = EDGE_CURVE('',#188971,#188979,#188981,.T.); +#188979 = VERTEX_POINT('',#188980); +#188980 = CARTESIAN_POINT('',(172.642857,-86.90174,1.585)); +#188981 = LINE('',#188982,#188983); +#188982 = CARTESIAN_POINT('',(172.364999,-86.90174,1.585)); +#188983 = VECTOR('',#188984,1.); +#188984 = DIRECTION('',(1.,0.,0.)); +#188985 = ORIENTED_EDGE('',*,*,#188986,.T.); +#188986 = EDGE_CURVE('',#188979,#188987,#188989,.T.); +#188987 = VERTEX_POINT('',#188988); +#188988 = CARTESIAN_POINT('',(172.642857,-87.03174,1.585)); +#188989 = CIRCLE('',#188990,6.500000000091E-02); +#188990 = AXIS2_PLACEMENT_3D('',#188991,#188992,#188993); +#188991 = CARTESIAN_POINT('',(172.64285665513,-86.96674,1.585)); +#188992 = DIRECTION('',(0.,0.,-1.)); +#188993 = DIRECTION('',(5.30565758841E-06,0.999999999986,0.)); +#188994 = ORIENTED_EDGE('',*,*,#188995,.T.); +#188995 = EDGE_CURVE('',#188987,#188996,#188998,.T.); +#188996 = VERTEX_POINT('',#188997); +#188997 = CARTESIAN_POINT('',(172.364999,-87.03174,1.585)); +#188998 = LINE('',#188999,#189000); +#188999 = CARTESIAN_POINT('',(172.642857,-87.03174,1.585)); +#189000 = VECTOR('',#189001,1.); +#189001 = DIRECTION('',(-1.,0.,0.)); +#189002 = ORIENTED_EDGE('',*,*,#189003,.T.); +#189003 = EDGE_CURVE('',#188996,#189004,#189006,.T.); +#189004 = VERTEX_POINT('',#189005); +#189005 = CARTESIAN_POINT('',(172.364999,-87.309597,1.585)); +#189006 = LINE('',#189007,#189008); +#189007 = CARTESIAN_POINT('',(172.364999,-87.03174,1.585)); +#189008 = VECTOR('',#189009,1.); +#189009 = DIRECTION('',(0.,-1.,0.)); +#189010 = ORIENTED_EDGE('',*,*,#189011,.T.); +#189011 = EDGE_CURVE('',#189004,#189012,#189014,.T.); +#189012 = VERTEX_POINT('',#189013); +#189013 = CARTESIAN_POINT('',(172.234999,-87.309597,1.585)); +#189014 = CIRCLE('',#189015,6.500000000093E-02); +#189015 = AXIS2_PLACEMENT_3D('',#189016,#189017,#189018); +#189016 = CARTESIAN_POINT('',(172.299999,-87.30959665513,1.585)); +#189017 = DIRECTION('',(-0.,0.,-1.)); +#189018 = DIRECTION('',(0.999999999986,-5.305658681554E-06,-0.)); +#189019 = ORIENTED_EDGE('',*,*,#189020,.T.); +#189020 = EDGE_CURVE('',#189012,#189021,#189023,.T.); +#189021 = VERTEX_POINT('',#189022); +#189022 = CARTESIAN_POINT('',(172.234999,-87.03174,1.585)); +#189023 = LINE('',#189024,#189025); +#189024 = CARTESIAN_POINT('',(172.234999,-87.309597,1.585)); +#189025 = VECTOR('',#189026,1.); +#189026 = DIRECTION('',(0.,1.,0.)); +#189027 = ORIENTED_EDGE('',*,*,#189028,.T.); +#189028 = EDGE_CURVE('',#189021,#189029,#189031,.T.); +#189029 = VERTEX_POINT('',#189030); +#189030 = CARTESIAN_POINT('',(171.957142,-87.03174,1.585)); +#189031 = LINE('',#189032,#189033); +#189032 = CARTESIAN_POINT('',(172.234999,-87.03174,1.585)); +#189033 = VECTOR('',#189034,1.); +#189034 = DIRECTION('',(-1.,0.,0.)); +#189035 = ORIENTED_EDGE('',*,*,#189036,.T.); +#189036 = EDGE_CURVE('',#189029,#189037,#189039,.T.); +#189037 = VERTEX_POINT('',#189038); +#189038 = CARTESIAN_POINT('',(171.957142,-86.90174,1.585)); +#189039 = CIRCLE('',#189040,6.500000000092E-02); +#189040 = AXIS2_PLACEMENT_3D('',#189041,#189042,#189043); +#189041 = CARTESIAN_POINT('',(171.95714234486,-86.96674,1.585)); +#189042 = DIRECTION('',(0.,0.,-1.)); +#189043 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#189044 = ORIENTED_EDGE('',*,*,#189045,.T.); +#189045 = EDGE_CURVE('',#189037,#189046,#189048,.T.); +#189046 = VERTEX_POINT('',#189047); +#189047 = CARTESIAN_POINT('',(172.234999,-86.90174,1.585)); +#189048 = LINE('',#189049,#189050); +#189049 = CARTESIAN_POINT('',(171.957142,-86.90174,1.585)); +#189050 = VECTOR('',#189051,1.); +#189051 = DIRECTION('',(1.,0.,0.)); +#189052 = ORIENTED_EDGE('',*,*,#189053,.T.); +#189053 = EDGE_CURVE('',#189046,#189054,#189056,.T.); +#189054 = VERTEX_POINT('',#189055); +#189055 = CARTESIAN_POINT('',(172.234999,-86.623882,1.585)); +#189056 = LINE('',#189057,#189058); +#189057 = CARTESIAN_POINT('',(172.234999,-86.90174,1.585)); +#189058 = VECTOR('',#189059,1.); +#189059 = DIRECTION('',(0.,1.,0.)); +#189060 = ORIENTED_EDGE('',*,*,#189061,.T.); +#189061 = EDGE_CURVE('',#189054,#188960,#189062,.T.); +#189062 = LINE('',#189063,#189064); +#189063 = CARTESIAN_POINT('',(172.234999,-86.623882,1.585)); +#189064 = VECTOR('',#189065,1.); +#189065 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#189066 = PLANE('',#189067); +#189067 = AXIS2_PLACEMENT_3D('',#189068,#189069,#189070); +#189068 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189069 = DIRECTION('',(0.,0.,1.)); +#189070 = DIRECTION('',(1.,0.,-0.)); +#189071 = SHELL_BASED_SURFACE_MODEL('',(#189072)); +#189072 = OPEN_SHELL('',(#189073)); +#189073 = ADVANCED_FACE('',(#189074),#189193,.T.); +#189074 = FACE_BOUND('',#189075,.F.); +#189075 = EDGE_LOOP('',(#189076,#189087,#189095,#189104,#189112,#189120, + #189128,#189137,#189145,#189153,#189161,#189170,#189178,#189187)); +#189076 = ORIENTED_EDGE('',*,*,#189077,.T.); +#189077 = EDGE_CURVE('',#189078,#189080,#189082,.T.); +#189078 = VERTEX_POINT('',#189079); +#189079 = CARTESIAN_POINT('',(199.692142,-86.309597,1.585)); +#189080 = VERTEX_POINT('',#189081); +#189081 = CARTESIAN_POINT('',(199.757142,-86.244597,1.585)); +#189082 = CIRCLE('',#189083,6.500103935393E-02); +#189083 = AXIS2_PLACEMENT_3D('',#189084,#189085,#189086); +#189084 = CARTESIAN_POINT('',(199.75714303934,-86.30959803934,1.585)); +#189085 = DIRECTION('',(0.,0.,-1.)); +#189086 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#189087 = ORIENTED_EDGE('',*,*,#189088,.T.); +#189088 = EDGE_CURVE('',#189080,#189089,#189091,.T.); +#189089 = VERTEX_POINT('',#189090); +#189090 = CARTESIAN_POINT('',(200.185714,-86.244597,1.585)); +#189091 = LINE('',#189092,#189093); +#189092 = CARTESIAN_POINT('',(199.757142,-86.244597,1.585)); +#189093 = VECTOR('',#189094,1.); +#189094 = DIRECTION('',(1.,0.,0.)); +#189095 = ORIENTED_EDGE('',*,*,#189096,.T.); +#189096 = EDGE_CURVE('',#189089,#189097,#189099,.T.); +#189097 = VERTEX_POINT('',#189098); +#189098 = CARTESIAN_POINT('',(200.185714,-86.374597,1.585)); +#189099 = CIRCLE('',#189100,6.500000000091E-02); +#189100 = AXIS2_PLACEMENT_3D('',#189101,#189102,#189103); +#189101 = CARTESIAN_POINT('',(200.18571365513,-86.309597,1.585)); +#189102 = DIRECTION('',(0.,0.,-1.)); +#189103 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#189104 = ORIENTED_EDGE('',*,*,#189105,.T.); +#189105 = EDGE_CURVE('',#189097,#189106,#189108,.T.); +#189106 = VERTEX_POINT('',#189107); +#189107 = CARTESIAN_POINT('',(199.822142,-86.374597,1.585)); +#189108 = LINE('',#189109,#189110); +#189109 = CARTESIAN_POINT('',(200.185714,-86.374597,1.585)); +#189110 = VECTOR('',#189111,1.); +#189111 = DIRECTION('',(-1.,0.,0.)); +#189112 = ORIENTED_EDGE('',*,*,#189113,.T.); +#189113 = EDGE_CURVE('',#189106,#189114,#189116,.T.); +#189114 = VERTEX_POINT('',#189115); +#189115 = CARTESIAN_POINT('',(199.822142,-86.673168,1.585)); +#189116 = LINE('',#189117,#189118); +#189117 = CARTESIAN_POINT('',(199.822142,-86.374597,1.585)); +#189118 = VECTOR('',#189119,1.); +#189119 = DIRECTION('',(0.,-1.,0.)); +#189120 = ORIENTED_EDGE('',*,*,#189121,.T.); +#189121 = EDGE_CURVE('',#189114,#189122,#189124,.T.); +#189122 = VERTEX_POINT('',#189123); +#189123 = CARTESIAN_POINT('',(200.057142,-86.673168,1.585)); +#189124 = LINE('',#189125,#189126); +#189125 = CARTESIAN_POINT('',(199.822142,-86.673168,1.585)); +#189126 = VECTOR('',#189127,1.); +#189127 = DIRECTION('',(1.,0.,0.)); +#189128 = ORIENTED_EDGE('',*,*,#189129,.T.); +#189129 = EDGE_CURVE('',#189122,#189130,#189132,.T.); +#189130 = VERTEX_POINT('',#189131); +#189131 = CARTESIAN_POINT('',(200.057142,-86.803168,1.585)); +#189132 = CIRCLE('',#189133,6.500000000091E-02); +#189133 = AXIS2_PLACEMENT_3D('',#189134,#189135,#189136); +#189134 = CARTESIAN_POINT('',(200.05714165513,-86.738168,1.585)); +#189135 = DIRECTION('',(0.,0.,-1.)); +#189136 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#189137 = ORIENTED_EDGE('',*,*,#189138,.T.); +#189138 = EDGE_CURVE('',#189130,#189139,#189141,.T.); +#189139 = VERTEX_POINT('',#189140); +#189140 = CARTESIAN_POINT('',(199.822142,-86.803168,1.585)); +#189141 = LINE('',#189142,#189143); +#189142 = CARTESIAN_POINT('',(200.057142,-86.803168,1.585)); +#189143 = VECTOR('',#189144,1.); +#189144 = DIRECTION('',(-1.,0.,0.)); +#189145 = ORIENTED_EDGE('',*,*,#189146,.T.); +#189146 = EDGE_CURVE('',#189139,#189147,#189149,.T.); +#189147 = VERTEX_POINT('',#189148); +#189148 = CARTESIAN_POINT('',(199.822142,-87.144597,1.585)); +#189149 = LINE('',#189150,#189151); +#189150 = CARTESIAN_POINT('',(199.822142,-86.803168,1.585)); +#189151 = VECTOR('',#189152,1.); +#189152 = DIRECTION('',(0.,-1.,0.)); +#189153 = ORIENTED_EDGE('',*,*,#189154,.T.); +#189154 = EDGE_CURVE('',#189147,#189155,#189157,.T.); +#189155 = VERTEX_POINT('',#189156); +#189156 = CARTESIAN_POINT('',(200.185714,-87.144597,1.585)); +#189157 = LINE('',#189158,#189159); +#189158 = CARTESIAN_POINT('',(199.822142,-87.144597,1.585)); +#189159 = VECTOR('',#189160,1.); +#189160 = DIRECTION('',(1.,0.,0.)); +#189161 = ORIENTED_EDGE('',*,*,#189162,.T.); +#189162 = EDGE_CURVE('',#189155,#189163,#189165,.T.); +#189163 = VERTEX_POINT('',#189164); +#189164 = CARTESIAN_POINT('',(200.185714,-87.274597,1.585)); +#189165 = CIRCLE('',#189166,6.500000000091E-02); +#189166 = AXIS2_PLACEMENT_3D('',#189167,#189168,#189169); +#189167 = CARTESIAN_POINT('',(200.18571365513,-87.209597,1.585)); +#189168 = DIRECTION('',(0.,0.,-1.)); +#189169 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#189170 = ORIENTED_EDGE('',*,*,#189171,.T.); +#189171 = EDGE_CURVE('',#189163,#189172,#189174,.T.); +#189172 = VERTEX_POINT('',#189173); +#189173 = CARTESIAN_POINT('',(199.757142,-87.274597,1.585)); +#189174 = LINE('',#189175,#189176); +#189175 = CARTESIAN_POINT('',(200.185714,-87.274597,1.585)); +#189176 = VECTOR('',#189177,1.); +#189177 = DIRECTION('',(-1.,0.,0.)); +#189178 = ORIENTED_EDGE('',*,*,#189179,.T.); +#189179 = EDGE_CURVE('',#189172,#189180,#189182,.T.); +#189180 = VERTEX_POINT('',#189181); +#189181 = CARTESIAN_POINT('',(199.692142,-87.209597,1.585)); +#189182 = CIRCLE('',#189183,6.500103935393E-02); +#189183 = AXIS2_PLACEMENT_3D('',#189184,#189185,#189186); +#189184 = CARTESIAN_POINT('',(199.75714303934,-87.20959596065,1.585)); +#189185 = DIRECTION('',(0.,0.,-1.)); +#189186 = DIRECTION('',(-1.598967692944E-05,-0.999999999872,-0.)); +#189187 = ORIENTED_EDGE('',*,*,#189188,.T.); +#189188 = EDGE_CURVE('',#189180,#189078,#189189,.T.); +#189189 = LINE('',#189190,#189191); +#189190 = CARTESIAN_POINT('',(199.692142,-87.209597,1.585)); +#189191 = VECTOR('',#189192,1.); +#189192 = DIRECTION('',(0.,1.,0.)); +#189193 = PLANE('',#189194); +#189194 = AXIS2_PLACEMENT_3D('',#189195,#189196,#189197); +#189195 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189196 = DIRECTION('',(0.,0.,1.)); +#189197 = DIRECTION('',(1.,0.,-0.)); +#189198 = SHELL_BASED_SURFACE_MODEL('',(#189199)); +#189199 = OPEN_SHELL('',(#189200)); +#189200 = ADVANCED_FACE('',(#189201),#189262,.T.); +#189201 = FACE_BOUND('',#189202,.F.); +#189202 = EDGE_LOOP('',(#189203,#189214,#189222,#189231,#189239,#189248, + #189256)); +#189203 = ORIENTED_EDGE('',*,*,#189204,.T.); +#189204 = EDGE_CURVE('',#189205,#189207,#189209,.T.); +#189205 = VERTEX_POINT('',#189206); +#189206 = CARTESIAN_POINT('',(198.495477,-86.289042,1.585)); +#189207 = VERTEX_POINT('',#189208); +#189208 = CARTESIAN_POINT('',(198.618806,-86.330152,1.585)); +#189209 = CIRCLE('',#189210,6.500014296398E-02); +#189210 = AXIS2_PLACEMENT_3D('',#189211,#189212,#189213); +#189211 = CARTESIAN_POINT('',(198.55714140669,-86.30959727991,1.585)); +#189212 = DIRECTION('',(0.,0.,-1.)); +#189213 = DIRECTION('',(-0.948681093355,0.316234380027,0.)); +#189214 = ORIENTED_EDGE('',*,*,#189215,.T.); +#189215 = EDGE_CURVE('',#189207,#189216,#189218,.T.); +#189216 = VERTEX_POINT('',#189217); +#189217 = CARTESIAN_POINT('',(198.318806,-87.230152,1.585)); +#189218 = LINE('',#189219,#189220); +#189219 = CARTESIAN_POINT('',(198.618806,-86.330152,1.585)); +#189220 = VECTOR('',#189221,1.); +#189221 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#189222 = ORIENTED_EDGE('',*,*,#189223,.T.); +#189223 = EDGE_CURVE('',#189216,#189224,#189226,.T.); +#189224 = VERTEX_POINT('',#189225); +#189225 = CARTESIAN_POINT('',(198.195477,-87.230152,1.585)); +#189226 = CIRCLE('',#189227,6.500043802859E-02); +#189227 = AXIS2_PLACEMENT_3D('',#189228,#189229,#189230); +#189228 = CARTESIAN_POINT('',(198.2571415,-87.20959606694,1.585)); +#189229 = DIRECTION('',(-0.,0.,-1.)); +#189230 = DIRECTION('',(0.948678222336,-0.316242992755,-0.)); +#189231 = ORIENTED_EDGE('',*,*,#189232,.T.); +#189232 = EDGE_CURVE('',#189224,#189233,#189235,.T.); +#189233 = VERTEX_POINT('',#189234); +#189234 = CARTESIAN_POINT('',(197.895478,-86.330152,1.585)); +#189235 = LINE('',#189236,#189237); +#189236 = CARTESIAN_POINT('',(198.195477,-87.230152,1.585)); +#189237 = VECTOR('',#189238,1.); +#189238 = DIRECTION('',(-0.316226817333,0.948683614278,0.)); +#189239 = ORIENTED_EDGE('',*,*,#189240,.T.); +#189240 = EDGE_CURVE('',#189233,#189241,#189243,.T.); +#189241 = VERTEX_POINT('',#189242); +#189242 = CARTESIAN_POINT('',(198.018806,-86.289042,1.585)); +#189243 = CIRCLE('',#189244,6.499966862238E-02); +#189244 = AXIS2_PLACEMENT_3D('',#189245,#189246,#189247); +#189245 = CARTESIAN_POINT('',(197.95714204307,-86.30959712923,1.585)); +#189246 = DIRECTION('',(0.,0.,-1.)); +#189247 = DIRECTION('',(-0.948682422317,-0.316230393205,-0.)); +#189248 = ORIENTED_EDGE('',*,*,#189249,.T.); +#189249 = EDGE_CURVE('',#189241,#189250,#189252,.T.); +#189250 = VERTEX_POINT('',#189251); +#189251 = CARTESIAN_POINT('',(198.257141,-87.004049,1.585)); +#189252 = LINE('',#189253,#189254); +#189253 = CARTESIAN_POINT('',(198.018806,-86.289042,1.585)); +#189254 = VECTOR('',#189255,1.); +#189255 = DIRECTION('',(0.316226969926,-0.948683563414,0.)); +#189256 = ORIENTED_EDGE('',*,*,#189257,.T.); +#189257 = EDGE_CURVE('',#189250,#189205,#189258,.T.); +#189258 = LINE('',#189259,#189260); +#189259 = CARTESIAN_POINT('',(198.257141,-87.004049,1.585)); +#189260 = VECTOR('',#189261,1.); +#189261 = DIRECTION('',(0.316228164062,0.948683165369,0.)); +#189262 = PLANE('',#189263); +#189263 = AXIS2_PLACEMENT_3D('',#189264,#189265,#189266); +#189264 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189265 = DIRECTION('',(0.,0.,1.)); +#189266 = DIRECTION('',(1.,0.,-0.)); +#189267 = SHELL_BASED_SURFACE_MODEL('',(#189268)); +#189268 = OPEN_SHELL('',(#189269)); +#189269 = ADVANCED_FACE('',(#189270,#189404),#189456,.T.); +#189270 = FACE_BOUND('',#189271,.F.); +#189271 = EDGE_LOOP('',(#189272,#189283,#189291,#189299,#189307,#189316, + #189324,#189332,#189340,#189348,#189356,#189365,#189373,#189381, + #189389,#189398)); +#189272 = ORIENTED_EDGE('',*,*,#189273,.T.); +#189273 = EDGE_CURVE('',#189274,#189276,#189278,.T.); +#189274 = VERTEX_POINT('',#189275); +#189275 = CARTESIAN_POINT('',(198.792142,-86.309597,1.585)); +#189276 = VERTEX_POINT('',#189277); +#189277 = CARTESIAN_POINT('',(198.857142,-86.244597,1.585)); +#189278 = CIRCLE('',#189279,6.500103935382E-02); +#189279 = AXIS2_PLACEMENT_3D('',#189280,#189281,#189282); +#189280 = CARTESIAN_POINT('',(198.85714303934,-86.30959803934,1.585)); +#189281 = DIRECTION('',(0.,0.,-1.)); +#189282 = DIRECTION('',(-0.999999999872,1.598967539909E-05,0.)); +#189283 = ORIENTED_EDGE('',*,*,#189284,.T.); +#189284 = EDGE_CURVE('',#189276,#189285,#189287,.T.); +#189285 = VERTEX_POINT('',#189286); +#189286 = CARTESIAN_POINT('',(199.203192,-86.245232,1.585)); +#189287 = LINE('',#189288,#189289); +#189288 = CARTESIAN_POINT('',(198.857142,-86.244597,1.585)); +#189289 = VECTOR('',#189290,1.); +#189290 = DIRECTION('',(0.999998316401,-1.834991853539E-03,0.)); +#189291 = ORIENTED_EDGE('',*,*,#189292,.T.); +#189292 = EDGE_CURVE('',#189285,#189293,#189295,.T.); +#189293 = VERTEX_POINT('',#189294); +#189294 = CARTESIAN_POINT('',(199.229068,-86.251459,1.585)); +#189295 = LINE('',#189296,#189297); +#189296 = CARTESIAN_POINT('',(199.203192,-86.245232,1.585)); +#189297 = VECTOR('',#189298,1.); +#189298 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#189299 = ORIENTED_EDGE('',*,*,#189300,.T.); +#189300 = EDGE_CURVE('',#189293,#189301,#189303,.T.); +#189301 = VERTEX_POINT('',#189302); +#189302 = CARTESIAN_POINT('',(199.331676,-86.306492,1.585)); +#189303 = LINE('',#189304,#189305); +#189304 = CARTESIAN_POINT('',(199.229068,-86.251459,1.585)); +#189305 = VECTOR('',#189306,1.); +#189306 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#189307 = ORIENTED_EDGE('',*,*,#189308,.T.); +#189308 = EDGE_CURVE('',#189301,#189309,#189311,.T.); +#189309 = VERTEX_POINT('',#189310); +#189310 = CARTESIAN_POINT('',(199.433512,-86.624253,1.585)); +#189311 = CIRCLE('',#189312,0.311668456373); +#189312 = AXIS2_PLACEMENT_3D('',#189313,#189314,#189315); +#189313 = CARTESIAN_POINT('',(199.13190146242,-86.54571440872,1.585)); +#189314 = DIRECTION('',(0.,0.,-1.)); +#189315 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#189316 = ORIENTED_EDGE('',*,*,#189317,.T.); +#189317 = EDGE_CURVE('',#189309,#189318,#189320,.T.); +#189318 = VERTEX_POINT('',#189319); +#189319 = CARTESIAN_POINT('',(199.380322,-86.732608,1.585)); +#189320 = LINE('',#189321,#189322); +#189321 = CARTESIAN_POINT('',(199.433512,-86.624253,1.585)); +#189322 = VECTOR('',#189323,1.); +#189323 = DIRECTION('',(-0.440656804576,-0.897675654444,0.)); +#189324 = ORIENTED_EDGE('',*,*,#189325,.T.); +#189325 = EDGE_CURVE('',#189318,#189326,#189328,.T.); +#189326 = VERTEX_POINT('',#189327); +#189327 = CARTESIAN_POINT('',(199.323011,-86.789919,1.585)); +#189328 = LINE('',#189329,#189330); +#189329 = CARTESIAN_POINT('',(199.380322,-86.732608,1.585)); +#189330 = VECTOR('',#189331,1.); +#189331 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#189332 = ORIENTED_EDGE('',*,*,#189333,.T.); +#189333 = EDGE_CURVE('',#189326,#189334,#189336,.T.); +#189334 = VERTEX_POINT('',#189335); +#189335 = CARTESIAN_POINT('',(199.214655,-86.843109,1.585)); +#189336 = LINE('',#189337,#189338); +#189337 = CARTESIAN_POINT('',(199.323011,-86.789919,1.585)); +#189338 = VECTOR('',#189339,1.); +#189339 = DIRECTION('',(-0.897677263112,-0.440653527492,0.)); +#189340 = ORIENTED_EDGE('',*,*,#189341,.T.); +#189341 = EDGE_CURVE('',#189334,#189342,#189344,.T.); +#189342 = VERTEX_POINT('',#189343); +#189343 = CARTESIAN_POINT('',(199.19627,-86.846025,1.585)); +#189344 = LINE('',#189345,#189346); +#189345 = CARTESIAN_POINT('',(199.214655,-86.843109,1.585)); +#189346 = VECTOR('',#189347,1.); +#189347 = DIRECTION('',(-0.987654268842,-0.15664943421,0.)); +#189348 = ORIENTED_EDGE('',*,*,#189349,.T.); +#189349 = EDGE_CURVE('',#189342,#189350,#189352,.T.); +#189350 = VERTEX_POINT('',#189351); +#189351 = CARTESIAN_POINT('',(199.424678,-87.172322,1.585)); +#189352 = LINE('',#189353,#189354); +#189353 = CARTESIAN_POINT('',(199.19627,-86.846025,1.585)); +#189354 = VECTOR('',#189355,1.); +#189355 = DIRECTION('',(0.573462512866,-0.819231802567,0.)); +#189356 = ORIENTED_EDGE('',*,*,#189357,.T.); +#189357 = EDGE_CURVE('',#189350,#189358,#189360,.T.); +#189358 = VERTEX_POINT('',#189359); +#189359 = CARTESIAN_POINT('',(199.318178,-87.246872,1.585)); +#189360 = CIRCLE('',#189361,6.499990865385E-02); +#189361 = AXIS2_PLACEMENT_3D('',#189362,#189363,#189364); +#189362 = CARTESIAN_POINT('',(199.37142805055,-87.20959707222,1.585)); +#189363 = DIRECTION('',(0.,0.,-1.)); +#189364 = DIRECTION('',(0.819231142687,0.573463455551,0.)); +#189365 = ORIENTED_EDGE('',*,*,#189366,.T.); +#189366 = EDGE_CURVE('',#189358,#189367,#189369,.T.); +#189367 = VERTEX_POINT('',#189368); +#189368 = CARTESIAN_POINT('',(199.037585,-86.846025,1.585)); +#189369 = LINE('',#189370,#189371); +#189370 = CARTESIAN_POINT('',(199.318178,-87.246872,1.585)); +#189371 = VECTOR('',#189372,1.); +#189372 = DIRECTION('',(-0.573462481528,0.819231824504,0.)); +#189373 = ORIENTED_EDGE('',*,*,#189374,.T.); +#189374 = EDGE_CURVE('',#189367,#189375,#189377,.T.); +#189375 = VERTEX_POINT('',#189376); +#189376 = CARTESIAN_POINT('',(198.922142,-86.846025,1.585)); +#189377 = LINE('',#189378,#189379); +#189378 = CARTESIAN_POINT('',(199.037585,-86.846025,1.585)); +#189379 = VECTOR('',#189380,1.); +#189380 = DIRECTION('',(-1.,0.,0.)); +#189381 = ORIENTED_EDGE('',*,*,#189382,.T.); +#189382 = EDGE_CURVE('',#189375,#189383,#189385,.T.); +#189383 = VERTEX_POINT('',#189384); +#189384 = CARTESIAN_POINT('',(198.922142,-87.209597,1.585)); +#189385 = LINE('',#189386,#189387); +#189386 = CARTESIAN_POINT('',(198.922142,-86.846025,1.585)); +#189387 = VECTOR('',#189388,1.); +#189388 = DIRECTION('',(0.,-1.,0.)); +#189389 = ORIENTED_EDGE('',*,*,#189390,.T.); +#189390 = EDGE_CURVE('',#189383,#189391,#189393,.T.); +#189391 = VERTEX_POINT('',#189392); +#189392 = CARTESIAN_POINT('',(198.792142,-87.209597,1.585)); +#189393 = CIRCLE('',#189394,6.500000000092E-02); +#189394 = AXIS2_PLACEMENT_3D('',#189395,#189396,#189397); +#189395 = CARTESIAN_POINT('',(198.857142,-87.20959665513,1.585)); +#189396 = DIRECTION('',(-0.,0.,-1.)); +#189397 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#189398 = ORIENTED_EDGE('',*,*,#189399,.T.); +#189399 = EDGE_CURVE('',#189391,#189274,#189400,.T.); +#189400 = LINE('',#189401,#189402); +#189401 = CARTESIAN_POINT('',(198.792142,-87.209597,1.585)); +#189402 = VECTOR('',#189403,1.); +#189403 = DIRECTION('',(0.,1.,0.)); +#189404 = FACE_BOUND('',#189405,.F.); +#189405 = EDGE_LOOP('',(#189406,#189417,#189425,#189433,#189441,#189450) + ); +#189406 = ORIENTED_EDGE('',*,*,#189407,.T.); +#189407 = EDGE_CURVE('',#189408,#189410,#189412,.T.); +#189408 = VERTEX_POINT('',#189409); +#189409 = CARTESIAN_POINT('',(199.306428,-86.49637,1.585)); +#189410 = VERTEX_POINT('',#189411); +#189411 = CARTESIAN_POINT('',(199.184654,-86.374597,1.585)); +#189412 = CIRCLE('',#189413,0.170996278941); +#189413 = AXIS2_PLACEMENT_3D('',#189414,#189415,#189416); +#189414 = CARTESIAN_POINT('',(199.1410777157,-86.53994764214,1.585)); +#189415 = DIRECTION('',(0.,0.,1.)); +#189416 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#189417 = ORIENTED_EDGE('',*,*,#189418,.T.); +#189418 = EDGE_CURVE('',#189410,#189419,#189421,.T.); +#189419 = VERTEX_POINT('',#189420); +#189420 = CARTESIAN_POINT('',(198.922142,-86.374597,1.585)); +#189421 = LINE('',#189422,#189423); +#189422 = CARTESIAN_POINT('',(199.184654,-86.374597,1.585)); +#189423 = VECTOR('',#189424,1.); +#189424 = DIRECTION('',(-1.,0.,0.)); +#189425 = ORIENTED_EDGE('',*,*,#189426,.T.); +#189426 = EDGE_CURVE('',#189419,#189427,#189429,.T.); +#189427 = VERTEX_POINT('',#189428); +#189428 = CARTESIAN_POINT('',(198.922142,-86.716025,1.585)); +#189429 = LINE('',#189430,#189431); +#189430 = CARTESIAN_POINT('',(198.922142,-86.374597,1.585)); +#189431 = VECTOR('',#189432,1.); +#189432 = DIRECTION('',(0.,-1.,0.)); +#189433 = ORIENTED_EDGE('',*,*,#189434,.T.); +#189434 = EDGE_CURVE('',#189427,#189435,#189437,.T.); +#189435 = VERTEX_POINT('',#189436); +#189436 = CARTESIAN_POINT('',(199.184654,-86.716025,1.585)); +#189437 = LINE('',#189438,#189439); +#189438 = CARTESIAN_POINT('',(198.922142,-86.716025,1.585)); +#189439 = VECTOR('',#189440,1.); +#189440 = DIRECTION('',(1.,0.,0.)); +#189441 = ORIENTED_EDGE('',*,*,#189442,.T.); +#189442 = EDGE_CURVE('',#189435,#189443,#189445,.T.); +#189443 = VERTEX_POINT('',#189444); +#189444 = CARTESIAN_POINT('',(199.306428,-86.594252,1.585)); +#189445 = CIRCLE('',#189446,0.171001125777); +#189446 = AXIS2_PLACEMENT_3D('',#189447,#189448,#189449); +#189447 = CARTESIAN_POINT('',(199.14107374885,-86.55067039097,1.585)); +#189448 = DIRECTION('',(0.,0.,1.)); +#189449 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#189450 = ORIENTED_EDGE('',*,*,#189451,.T.); +#189451 = EDGE_CURVE('',#189443,#189408,#189452,.T.); +#189452 = LINE('',#189453,#189454); +#189453 = CARTESIAN_POINT('',(199.306428,-86.594252,1.585)); +#189454 = VECTOR('',#189455,1.); +#189455 = DIRECTION('',(0.,1.,0.)); +#189456 = PLANE('',#189457); +#189457 = AXIS2_PLACEMENT_3D('',#189458,#189459,#189460); +#189458 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189459 = DIRECTION('',(0.,0.,1.)); +#189460 = DIRECTION('',(1.,0.,-0.)); +#189461 = SHELL_BASED_SURFACE_MODEL('',(#189462)); +#189462 = OPEN_SHELL('',(#189463)); +#189463 = ADVANCED_FACE('',(#189464),#189558,.T.); +#189464 = FACE_BOUND('',#189465,.F.); +#189465 = EDGE_LOOP('',(#189466,#189477,#189485,#189494,#189502,#189510, + #189518,#189527,#189535,#189543,#189552)); +#189466 = ORIENTED_EDGE('',*,*,#189467,.T.); +#189467 = EDGE_CURVE('',#189468,#189470,#189472,.T.); +#189468 = VERTEX_POINT('',#189469); +#189469 = CARTESIAN_POINT('',(200.506428,-86.309597,1.585)); +#189470 = VERTEX_POINT('',#189471); +#189471 = CARTESIAN_POINT('',(200.571428,-86.244597,1.585)); +#189472 = CIRCLE('',#189473,6.500103935393E-02); +#189473 = AXIS2_PLACEMENT_3D('',#189474,#189475,#189476); +#189474 = CARTESIAN_POINT('',(200.57142903934,-86.30959803934,1.585)); +#189475 = DIRECTION('',(0.,0.,-1.)); +#189476 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#189477 = ORIENTED_EDGE('',*,*,#189478,.T.); +#189478 = EDGE_CURVE('',#189470,#189479,#189481,.T.); +#189479 = VERTEX_POINT('',#189480); +#189480 = CARTESIAN_POINT('',(201.,-86.244597,1.585)); +#189481 = LINE('',#189482,#189483); +#189482 = CARTESIAN_POINT('',(200.571428,-86.244597,1.585)); +#189483 = VECTOR('',#189484,1.); +#189484 = DIRECTION('',(1.,0.,0.)); +#189485 = ORIENTED_EDGE('',*,*,#189486,.T.); +#189486 = EDGE_CURVE('',#189479,#189487,#189489,.T.); +#189487 = VERTEX_POINT('',#189488); +#189488 = CARTESIAN_POINT('',(201.,-86.374597,1.585)); +#189489 = CIRCLE('',#189490,6.500000000091E-02); +#189490 = AXIS2_PLACEMENT_3D('',#189491,#189492,#189493); +#189491 = CARTESIAN_POINT('',(200.99999965513,-86.309597,1.585)); +#189492 = DIRECTION('',(0.,0.,-1.)); +#189493 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#189494 = ORIENTED_EDGE('',*,*,#189495,.T.); +#189495 = EDGE_CURVE('',#189487,#189496,#189498,.T.); +#189496 = VERTEX_POINT('',#189497); +#189497 = CARTESIAN_POINT('',(200.636428,-86.374597,1.585)); +#189498 = LINE('',#189499,#189500); +#189499 = CARTESIAN_POINT('',(201.,-86.374597,1.585)); +#189500 = VECTOR('',#189501,1.); +#189501 = DIRECTION('',(-1.,0.,0.)); +#189502 = ORIENTED_EDGE('',*,*,#189503,.T.); +#189503 = EDGE_CURVE('',#189496,#189504,#189506,.T.); +#189504 = VERTEX_POINT('',#189505); +#189505 = CARTESIAN_POINT('',(200.636428,-86.673168,1.585)); +#189506 = LINE('',#189507,#189508); +#189507 = CARTESIAN_POINT('',(200.636428,-86.374597,1.585)); +#189508 = VECTOR('',#189509,1.); +#189509 = DIRECTION('',(0.,-1.,0.)); +#189510 = ORIENTED_EDGE('',*,*,#189511,.T.); +#189511 = EDGE_CURVE('',#189504,#189512,#189514,.T.); +#189512 = VERTEX_POINT('',#189513); +#189513 = CARTESIAN_POINT('',(200.871428,-86.673168,1.585)); +#189514 = LINE('',#189515,#189516); +#189515 = CARTESIAN_POINT('',(200.636428,-86.673168,1.585)); +#189516 = VECTOR('',#189517,1.); +#189517 = DIRECTION('',(1.,0.,0.)); +#189518 = ORIENTED_EDGE('',*,*,#189519,.T.); +#189519 = EDGE_CURVE('',#189512,#189520,#189522,.T.); +#189520 = VERTEX_POINT('',#189521); +#189521 = CARTESIAN_POINT('',(200.871428,-86.803168,1.585)); +#189522 = CIRCLE('',#189523,6.500000000091E-02); +#189523 = AXIS2_PLACEMENT_3D('',#189524,#189525,#189526); +#189524 = CARTESIAN_POINT('',(200.87142765513,-86.738168,1.585)); +#189525 = DIRECTION('',(0.,0.,-1.)); +#189526 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#189527 = ORIENTED_EDGE('',*,*,#189528,.T.); +#189528 = EDGE_CURVE('',#189520,#189529,#189531,.T.); +#189529 = VERTEX_POINT('',#189530); +#189530 = CARTESIAN_POINT('',(200.636428,-86.803168,1.585)); +#189531 = LINE('',#189532,#189533); +#189532 = CARTESIAN_POINT('',(200.871428,-86.803168,1.585)); +#189533 = VECTOR('',#189534,1.); +#189534 = DIRECTION('',(-1.,0.,0.)); +#189535 = ORIENTED_EDGE('',*,*,#189536,.T.); +#189536 = EDGE_CURVE('',#189529,#189537,#189539,.T.); +#189537 = VERTEX_POINT('',#189538); +#189538 = CARTESIAN_POINT('',(200.636428,-87.209597,1.585)); +#189539 = LINE('',#189540,#189541); +#189540 = CARTESIAN_POINT('',(200.636428,-86.803168,1.585)); +#189541 = VECTOR('',#189542,1.); +#189542 = DIRECTION('',(0.,-1.,0.)); +#189543 = ORIENTED_EDGE('',*,*,#189544,.T.); +#189544 = EDGE_CURVE('',#189537,#189545,#189547,.T.); +#189545 = VERTEX_POINT('',#189546); +#189546 = CARTESIAN_POINT('',(200.506428,-87.209597,1.585)); +#189547 = CIRCLE('',#189548,6.500000000092E-02); +#189548 = AXIS2_PLACEMENT_3D('',#189549,#189550,#189551); +#189549 = CARTESIAN_POINT('',(200.571428,-87.20959665513,1.585)); +#189550 = DIRECTION('',(-0.,0.,-1.)); +#189551 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#189552 = ORIENTED_EDGE('',*,*,#189553,.T.); +#189553 = EDGE_CURVE('',#189545,#189468,#189554,.T.); +#189554 = LINE('',#189555,#189556); +#189555 = CARTESIAN_POINT('',(200.506428,-87.209597,1.585)); +#189556 = VECTOR('',#189557,1.); +#189557 = DIRECTION('',(0.,1.,0.)); +#189558 = PLANE('',#189559); +#189559 = AXIS2_PLACEMENT_3D('',#189560,#189561,#189562); +#189560 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189561 = DIRECTION('',(0.,0.,1.)); +#189562 = DIRECTION('',(1.,0.,-0.)); +#189563 = SHELL_BASED_SURFACE_MODEL('',(#189564)); +#189564 = OPEN_SHELL('',(#189565)); +#189565 = ADVANCED_FACE('',(#189566),#189700,.T.); +#189566 = FACE_BOUND('',#189567,.F.); +#189567 = EDGE_LOOP('',(#189568,#189578,#189586,#189595,#189603,#189611, + #189620,#189628,#189637,#189645,#189653,#189661,#189669,#189678, + #189686,#189694)); +#189568 = ORIENTED_EDGE('',*,*,#189569,.T.); +#189569 = EDGE_CURVE('',#189570,#189572,#189574,.T.); +#189570 = VERTEX_POINT('',#189571); +#189571 = CARTESIAN_POINT('',(101.114752,-85.894941,1.585)); +#189572 = VERTEX_POINT('',#189573); +#189573 = CARTESIAN_POINT('',(101.153208,-85.87436,1.585)); +#189574 = LINE('',#189575,#189576); +#189575 = CARTESIAN_POINT('',(101.114752,-85.894941,1.585)); +#189576 = VECTOR('',#189577,1.); +#189577 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#189578 = ORIENTED_EDGE('',*,*,#189579,.T.); +#189579 = EDGE_CURVE('',#189572,#189580,#189582,.T.); +#189580 = VERTEX_POINT('',#189581); +#189581 = CARTESIAN_POINT('',(101.175045,-85.87436,1.585)); +#189582 = LINE('',#189583,#189584); +#189583 = CARTESIAN_POINT('',(101.153208,-85.87436,1.585)); +#189584 = VECTOR('',#189585,1.); +#189585 = DIRECTION('',(1.,0.,0.)); +#189586 = ORIENTED_EDGE('',*,*,#189587,.T.); +#189587 = EDGE_CURVE('',#189580,#189588,#189590,.T.); +#189588 = VERTEX_POINT('',#189589); +#189589 = CARTESIAN_POINT('',(101.24284,-85.947919,1.585)); +#189590 = CIRCLE('',#189591,7.21689809423E-02); +#189591 = AXIS2_PLACEMENT_3D('',#189592,#189593,#189594); +#189592 = CARTESIAN_POINT('',(101.17068706389,-85.94639728342,1.585)); +#189593 = DIRECTION('',(0.,0.,-1.)); +#189594 = DIRECTION('',(6.038516895283E-02,0.998175150648,0.)); +#189595 = ORIENTED_EDGE('',*,*,#189596,.T.); +#189596 = EDGE_CURVE('',#189588,#189597,#189599,.T.); +#189597 = VERTEX_POINT('',#189598); +#189598 = CARTESIAN_POINT('',(101.24284,-86.872919,1.585)); +#189599 = LINE('',#189600,#189601); +#189600 = CARTESIAN_POINT('',(101.24284,-85.947919,1.585)); +#189601 = VECTOR('',#189602,1.); +#189602 = DIRECTION('',(0.,-1.,0.)); +#189603 = ORIENTED_EDGE('',*,*,#189604,.T.); +#189604 = EDGE_CURVE('',#189597,#189605,#189607,.T.); +#189605 = VERTEX_POINT('',#189606); +#189606 = CARTESIAN_POINT('',(101.468186,-86.87436,1.585)); +#189607 = LINE('',#189608,#189609); +#189608 = CARTESIAN_POINT('',(101.24284,-86.872919,1.585)); +#189609 = VECTOR('',#189610,1.); +#189610 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#189611 = ORIENTED_EDGE('',*,*,#189612,.T.); +#189612 = EDGE_CURVE('',#189605,#189613,#189615,.T.); +#189613 = VERTEX_POINT('',#189614); +#189614 = CARTESIAN_POINT('',(101.453554,-87.022919,1.585)); +#189615 = CIRCLE('',#189616,7.500006711464E-02); +#189616 = AXIS2_PLACEMENT_3D('',#189617,#189618,#189619); +#189617 = CARTESIAN_POINT('',(101.45355406711,-86.94791893288,1.585)); +#189618 = DIRECTION('',(0.,0.,-1.)); +#189619 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#189620 = ORIENTED_EDGE('',*,*,#189621,.T.); +#189621 = EDGE_CURVE('',#189613,#189622,#189624,.T.); +#189622 = VERTEX_POINT('',#189623); +#189623 = CARTESIAN_POINT('',(100.867494,-87.021478,1.585)); +#189624 = LINE('',#189625,#189626); +#189625 = CARTESIAN_POINT('',(101.453554,-87.022919,1.585)); +#189626 = VECTOR('',#189627,1.); +#189627 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#189628 = ORIENTED_EDGE('',*,*,#189629,.T.); +#189629 = EDGE_CURVE('',#189622,#189630,#189632,.T.); +#189630 = VERTEX_POINT('',#189631); +#189631 = CARTESIAN_POINT('',(100.882126,-86.872919,1.585)); +#189632 = CIRCLE('',#189633,7.500006711465E-02); +#189633 = AXIS2_PLACEMENT_3D('',#189634,#189635,#189636); +#189634 = CARTESIAN_POINT('',(100.88212593288,-86.94791906711,1.585)); +#189635 = DIRECTION('',(0.,0.,-1.)); +#189636 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#189637 = ORIENTED_EDGE('',*,*,#189638,.T.); +#189638 = EDGE_CURVE('',#189630,#189639,#189641,.T.); +#189639 = VERTEX_POINT('',#189640); +#189640 = CARTESIAN_POINT('',(101.09284,-86.872919,1.585)); +#189641 = LINE('',#189642,#189643); +#189642 = CARTESIAN_POINT('',(100.882126,-86.872919,1.585)); +#189643 = VECTOR('',#189644,1.); +#189644 = DIRECTION('',(1.,0.,0.)); +#189645 = ORIENTED_EDGE('',*,*,#189646,.T.); +#189646 = EDGE_CURVE('',#189639,#189647,#189649,.T.); +#189647 = VERTEX_POINT('',#189648); +#189648 = CARTESIAN_POINT('',(101.09284,-86.176604,1.585)); +#189649 = LINE('',#189650,#189651); +#189650 = CARTESIAN_POINT('',(101.09284,-86.872919,1.585)); +#189651 = VECTOR('',#189652,1.); +#189652 = DIRECTION('',(0.,1.,0.)); +#189653 = ORIENTED_EDGE('',*,*,#189654,.T.); +#189654 = EDGE_CURVE('',#189647,#189655,#189657,.T.); +#189655 = VERTEX_POINT('',#189656); +#189656 = CARTESIAN_POINT('',(101.017204,-86.249131,1.585)); +#189657 = LINE('',#189658,#189659); +#189658 = CARTESIAN_POINT('',(101.09284,-86.176604,1.585)); +#189659 = VECTOR('',#189660,1.); +#189660 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#189661 = ORIENTED_EDGE('',*,*,#189662,.T.); +#189662 = EDGE_CURVE('',#189655,#189663,#189665,.T.); +#189663 = VERTEX_POINT('',#189664); +#189664 = CARTESIAN_POINT('',(100.901935,-86.30597,1.585)); +#189665 = LINE('',#189666,#189667); +#189666 = CARTESIAN_POINT('',(101.017204,-86.249131,1.585)); +#189667 = VECTOR('',#189668,1.); +#189668 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#189669 = ORIENTED_EDGE('',*,*,#189670,.T.); +#189670 = EDGE_CURVE('',#189663,#189671,#189673,.T.); +#189671 = VERTEX_POINT('',#189672); +#189672 = CARTESIAN_POINT('',(100.848585,-86.166551,1.585)); +#189673 = CIRCLE('',#189674,7.500005272361E-02); +#189674 = AXIS2_PLACEMENT_3D('',#189675,#189676,#189677); +#189675 = CARTESIAN_POINT('',(100.88212555676,-86.23363332972,1.585)); +#189676 = DIRECTION('',(0.,0.,-1.)); +#189677 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#189678 = ORIENTED_EDGE('',*,*,#189679,.T.); +#189679 = EDGE_CURVE('',#189671,#189680,#189682,.T.); +#189680 = VERTEX_POINT('',#189681); +#189681 = CARTESIAN_POINT('',(100.932937,-86.124375,1.585)); +#189682 = LINE('',#189683,#189684); +#189683 = CARTESIAN_POINT('',(100.848585,-86.166551,1.585)); +#189684 = VECTOR('',#189685,1.); +#189685 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#189686 = ORIENTED_EDGE('',*,*,#189687,.T.); +#189687 = EDGE_CURVE('',#189680,#189688,#189690,.T.); +#189688 = VERTEX_POINT('',#189689); +#189689 = CARTESIAN_POINT('',(101.014316,-86.042996,1.585)); +#189690 = LINE('',#189691,#189692); +#189691 = CARTESIAN_POINT('',(100.932937,-86.124375,1.585)); +#189692 = VECTOR('',#189693,1.); +#189693 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#189694 = ORIENTED_EDGE('',*,*,#189695,.T.); +#189695 = EDGE_CURVE('',#189688,#189570,#189696,.T.); +#189696 = LINE('',#189697,#189698); +#189697 = CARTESIAN_POINT('',(101.014316,-86.042996,1.585)); +#189698 = VECTOR('',#189699,1.); +#189699 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#189700 = PLANE('',#189701); +#189701 = AXIS2_PLACEMENT_3D('',#189702,#189703,#189704); +#189702 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189703 = DIRECTION('',(0.,0.,1.)); +#189704 = DIRECTION('',(1.,0.,-0.)); +#189705 = SHELL_BASED_SURFACE_MODEL('',(#189706)); +#189706 = OPEN_SHELL('',(#189707)); +#189707 = ADVANCED_FACE('',(#189708,#189819),#189871,.T.); +#189708 = FACE_BOUND('',#189709,.F.); +#189709 = EDGE_LOOP('',(#189710,#189721,#189729,#189738,#189746,#189755, + #189763,#189771,#189780,#189788,#189796,#189804,#189813)); +#189710 = ORIENTED_EDGE('',*,*,#189711,.T.); +#189711 = EDGE_CURVE('',#189712,#189714,#189716,.T.); +#189712 = VERTEX_POINT('',#189713); +#189713 = CARTESIAN_POINT('',(98.903805,-85.933287,1.585)); +#189714 = VERTEX_POINT('',#189715); +#189715 = CARTESIAN_POINT('',(98.977364,-85.872919,1.585)); +#189716 = CIRCLE('',#189717,7.500074938981E-02); +#189717 = AXIS2_PLACEMENT_3D('',#189718,#189719,#189720); +#189718 = CARTESIAN_POINT('',(98.97736446611,-85.94791974938,1.585)); +#189719 = DIRECTION('',(0.,0.,-1.)); +#189720 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#189721 = ORIENTED_EDGE('',*,*,#189722,.T.); +#189722 = EDGE_CURVE('',#189714,#189723,#189725,.T.); +#189723 = VERTEX_POINT('',#189724); +#189724 = CARTESIAN_POINT('',(99.372948,-85.87436,1.585)); +#189725 = LINE('',#189726,#189727); +#189726 = CARTESIAN_POINT('',(98.977364,-85.872919,1.585)); +#189727 = VECTOR('',#189728,1.); +#189728 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#189729 = ORIENTED_EDGE('',*,*,#189730,.T.); +#189730 = EDGE_CURVE('',#189723,#189731,#189733,.T.); +#189731 = VERTEX_POINT('',#189732); +#189732 = CARTESIAN_POINT('',(99.622351,-86.123763,1.585)); +#189733 = CIRCLE('',#189734,0.347870264855); +#189734 = AXIS2_PLACEMENT_3D('',#189735,#189736,#189737); +#189735 = CARTESIAN_POINT('',(99.285620265028,-86.21109073497,1.585)); +#189736 = DIRECTION('',(0.,0.,-1.)); +#189737 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#189738 = ORIENTED_EDGE('',*,*,#189739,.T.); +#189739 = EDGE_CURVE('',#189731,#189740,#189742,.T.); +#189740 = VERTEX_POINT('',#189741); +#189741 = CARTESIAN_POINT('',(99.621129,-86.301062,1.585)); +#189742 = LINE('',#189743,#189744); +#189743 = CARTESIAN_POINT('',(99.622351,-86.123763,1.585)); +#189744 = VECTOR('',#189745,1.); +#189745 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#189746 = ORIENTED_EDGE('',*,*,#189747,.T.); +#189747 = EDGE_CURVE('',#189740,#189748,#189750,.T.); +#189748 = VERTEX_POINT('',#189749); +#189749 = CARTESIAN_POINT('',(99.372948,-86.545287,1.585)); +#189750 = CIRCLE('',#189751,0.348632345848); +#189751 = AXIS2_PLACEMENT_3D('',#189752,#189753,#189754); +#189752 = CARTESIAN_POINT('',(99.285179194037,-86.2078834593,1.585)); +#189753 = DIRECTION('',(0.,0.,-1.)); +#189754 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#189755 = ORIENTED_EDGE('',*,*,#189756,.T.); +#189756 = EDGE_CURVE('',#189748,#189757,#189759,.T.); +#189757 = VERTEX_POINT('',#189758); +#189758 = CARTESIAN_POINT('',(99.359431,-86.546618,1.585)); +#189759 = LINE('',#189760,#189761); +#189760 = CARTESIAN_POINT('',(99.372948,-86.545287,1.585)); +#189761 = VECTOR('',#189762,1.); +#189762 = DIRECTION('',(-0.995186940545,-9.799465989934E-02,0.)); +#189763 = ORIENTED_EDGE('',*,*,#189764,.T.); +#189764 = EDGE_CURVE('',#189757,#189765,#189767,.T.); +#189765 = VERTEX_POINT('',#189766); +#189766 = CARTESIAN_POINT('',(99.617445,-86.917723,1.585)); +#189767 = LINE('',#189768,#189769); +#189768 = CARTESIAN_POINT('',(99.359431,-86.546618,1.585)); +#189769 = VECTOR('',#189770,1.); +#189770 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#189771 = ORIENTED_EDGE('',*,*,#189772,.T.); +#189772 = EDGE_CURVE('',#189765,#189773,#189775,.T.); +#189773 = VERTEX_POINT('',#189774); +#189774 = CARTESIAN_POINT('',(99.48735,-86.990929,1.585)); +#189775 = CIRCLE('',#189776,7.500005951702E-02); +#189776 = AXIS2_PLACEMENT_3D('',#189777,#189778,#189779); +#189777 = CARTESIAN_POINT('',(99.548792062942,-86.94791874739,1.585)); +#189778 = DIRECTION('',(0.,0.,-1.)); +#189779 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#189780 = ORIENTED_EDGE('',*,*,#189781,.T.); +#189781 = EDGE_CURVE('',#189773,#189782,#189784,.T.); +#189782 = VERTEX_POINT('',#189783); +#189783 = CARTESIAN_POINT('',(99.17641,-86.546728,1.585)); +#189784 = LINE('',#189785,#189786); +#189785 = CARTESIAN_POINT('',(99.48735,-86.990929,1.585)); +#189786 = VECTOR('',#189787,1.); +#189787 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#189788 = ORIENTED_EDGE('',*,*,#189789,.T.); +#189789 = EDGE_CURVE('',#189782,#189790,#189792,.T.); +#189790 = VERTEX_POINT('',#189791); +#189791 = CARTESIAN_POINT('',(99.052364,-86.546728,1.585)); +#189792 = LINE('',#189793,#189794); +#189793 = CARTESIAN_POINT('',(99.17641,-86.546728,1.585)); +#189794 = VECTOR('',#189795,1.); +#189795 = DIRECTION('',(-1.,0.,0.)); +#189796 = ORIENTED_EDGE('',*,*,#189797,.T.); +#189797 = EDGE_CURVE('',#189790,#189798,#189800,.T.); +#189798 = VERTEX_POINT('',#189799); +#189799 = CARTESIAN_POINT('',(99.050923,-86.962551,1.585)); +#189800 = LINE('',#189801,#189802); +#189801 = CARTESIAN_POINT('',(99.052364,-86.546728,1.585)); +#189802 = VECTOR('',#189803,1.); +#189803 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#189804 = ORIENTED_EDGE('',*,*,#189805,.T.); +#189805 = EDGE_CURVE('',#189798,#189806,#189808,.T.); +#189806 = VERTEX_POINT('',#189807); +#189807 = CARTESIAN_POINT('',(98.902364,-86.947919,1.585)); +#189808 = CIRCLE('',#189809,7.500006711463E-02); +#189809 = AXIS2_PLACEMENT_3D('',#189810,#189811,#189812); +#189810 = CARTESIAN_POINT('',(98.977364067115,-86.94791906711,1.585)); +#189811 = DIRECTION('',(-0.,0.,-1.)); +#189812 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#189813 = ORIENTED_EDGE('',*,*,#189814,.T.); +#189814 = EDGE_CURVE('',#189806,#189712,#189815,.T.); +#189815 = LINE('',#189816,#189817); +#189816 = CARTESIAN_POINT('',(98.902364,-86.947919,1.585)); +#189817 = VECTOR('',#189818,1.); +#189818 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#189819 = FACE_BOUND('',#189820,.F.); +#189820 = EDGE_LOOP('',(#189821,#189832,#189840,#189848,#189856,#189865) + ); +#189821 = ORIENTED_EDGE('',*,*,#189822,.T.); +#189822 = EDGE_CURVE('',#189823,#189825,#189827,.T.); +#189823 = VERTEX_POINT('',#189824); +#189824 = CARTESIAN_POINT('',(99.473792,-86.1561,1.585)); +#189825 = VERTEX_POINT('',#189826); +#189826 = CARTESIAN_POINT('',(99.340611,-86.022919,1.585)); +#189827 = CIRCLE('',#189828,0.18686440374); +#189828 = AXIS2_PLACEMENT_3D('',#189829,#189830,#189831); +#189829 = CARTESIAN_POINT('',(99.293075,-86.203636,1.585)); +#189830 = DIRECTION('',(0.,0.,1.)); +#189831 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#189832 = ORIENTED_EDGE('',*,*,#189833,.T.); +#189833 = EDGE_CURVE('',#189825,#189834,#189836,.T.); +#189834 = VERTEX_POINT('',#189835); +#189835 = CARTESIAN_POINT('',(99.052364,-86.022919,1.585)); +#189836 = LINE('',#189837,#189838); +#189837 = CARTESIAN_POINT('',(99.340611,-86.022919,1.585)); +#189838 = VECTOR('',#189839,1.); +#189839 = DIRECTION('',(-1.,0.,0.)); +#189840 = ORIENTED_EDGE('',*,*,#189841,.T.); +#189841 = EDGE_CURVE('',#189834,#189842,#189844,.T.); +#189842 = VERTEX_POINT('',#189843); +#189843 = CARTESIAN_POINT('',(99.052364,-86.396728,1.585)); +#189844 = LINE('',#189845,#189846); +#189845 = CARTESIAN_POINT('',(99.052364,-86.022919,1.585)); +#189846 = VECTOR('',#189847,1.); +#189847 = DIRECTION('',(0.,-1.,0.)); +#189848 = ORIENTED_EDGE('',*,*,#189849,.T.); +#189849 = EDGE_CURVE('',#189842,#189850,#189852,.T.); +#189850 = VERTEX_POINT('',#189851); +#189851 = CARTESIAN_POINT('',(99.340611,-86.396728,1.585)); +#189852 = LINE('',#189853,#189854); +#189853 = CARTESIAN_POINT('',(99.052364,-86.396728,1.585)); +#189854 = VECTOR('',#189855,1.); +#189855 = DIRECTION('',(1.,0.,0.)); +#189856 = ORIENTED_EDGE('',*,*,#189857,.T.); +#189857 = EDGE_CURVE('',#189850,#189858,#189860,.T.); +#189858 = VERTEX_POINT('',#189859); +#189859 = CARTESIAN_POINT('',(99.473792,-86.263547,1.585)); +#189860 = CIRCLE('',#189861,0.18686440374); +#189861 = AXIS2_PLACEMENT_3D('',#189862,#189863,#189864); +#189862 = CARTESIAN_POINT('',(99.293075,-86.216011,1.585)); +#189863 = DIRECTION('',(0.,0.,1.)); +#189864 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#189865 = ORIENTED_EDGE('',*,*,#189866,.T.); +#189866 = EDGE_CURVE('',#189858,#189823,#189867,.T.); +#189867 = LINE('',#189868,#189869); +#189868 = CARTESIAN_POINT('',(99.473792,-86.263547,1.585)); +#189869 = VECTOR('',#189870,1.); +#189870 = DIRECTION('',(0.,1.,0.)); +#189871 = PLANE('',#189872); +#189872 = AXIS2_PLACEMENT_3D('',#189873,#189874,#189875); +#189873 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189874 = DIRECTION('',(0.,0.,1.)); +#189875 = DIRECTION('',(1.,0.,-0.)); +#189876 = SHELL_BASED_SURFACE_MODEL('',(#189877)); +#189877 = OPEN_SHELL('',(#189878)); +#189878 = ADVANCED_FACE('',(#189879),#190143,.T.); +#189879 = FACE_BOUND('',#189880,.F.); +#189880 = EDGE_LOOP('',(#189881,#189891,#189899,#189907,#189916,#189924, + #189932,#189941,#189949,#189957,#189965,#189973,#189981,#189989, + #189997,#190006,#190014,#190022,#190030,#190038,#190047,#190055, + #190063,#190072,#190080,#190088,#190096,#190104,#190112,#190120, + #190128,#190137)); +#189881 = ORIENTED_EDGE('',*,*,#189882,.T.); +#189882 = EDGE_CURVE('',#189883,#189885,#189887,.T.); +#189883 = VERTEX_POINT('',#189884); +#189884 = CARTESIAN_POINT('',(99.985142,-85.93242,1.585)); +#189885 = VERTEX_POINT('',#189886); +#189886 = CARTESIAN_POINT('',(100.105589,-85.87436,1.585)); +#189887 = LINE('',#189888,#189889); +#189888 = CARTESIAN_POINT('',(99.985142,-85.93242,1.585)); +#189889 = VECTOR('',#189890,1.); +#189890 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#189891 = ORIENTED_EDGE('',*,*,#189892,.T.); +#189892 = EDGE_CURVE('',#189885,#189893,#189895,.T.); +#189893 = VERTEX_POINT('',#189894); +#189894 = CARTESIAN_POINT('',(100.365721,-85.873648,1.585)); +#189895 = LINE('',#189896,#189897); +#189896 = CARTESIAN_POINT('',(100.105589,-85.87436,1.585)); +#189897 = VECTOR('',#189898,1.); +#189898 = DIRECTION('',(0.99999625424,2.737061695645E-03,0.)); +#189899 = ORIENTED_EDGE('',*,*,#189900,.T.); +#189900 = EDGE_CURVE('',#189893,#189901,#189903,.T.); +#189901 = VERTEX_POINT('',#189902); +#189902 = CARTESIAN_POINT('',(100.538315,-85.930381,1.585)); +#189903 = LINE('',#189904,#189905); +#189904 = CARTESIAN_POINT('',(100.365721,-85.873648,1.585)); +#189905 = VECTOR('',#189906,1.); +#189906 = DIRECTION('',(0.949993312755,-0.312270244693,0.)); +#189907 = ORIENTED_EDGE('',*,*,#189908,.T.); +#189908 = EDGE_CURVE('',#189901,#189909,#189911,.T.); +#189909 = VERTEX_POINT('',#189910); +#189910 = CARTESIAN_POINT('',(100.477455,-86.066689,1.585)); +#189911 = CIRCLE('',#189912,7.499990197505E-02); +#189912 = AXIS2_PLACEMENT_3D('',#189913,#189914,#189915); +#189913 = CARTESIAN_POINT('',(100.50117295478,-85.99553814675,1.585)); +#189914 = DIRECTION('',(0.,0.,-1.)); +#189915 = DIRECTION('',(0.495227916747,0.868763092261,0.)); +#189916 = ORIENTED_EDGE('',*,*,#189917,.T.); +#189917 = EDGE_CURVE('',#189909,#189918,#189920,.T.); +#189918 = VERTEX_POINT('',#189919); +#189919 = CARTESIAN_POINT('',(100.346146,-86.022919,1.585)); +#189920 = LINE('',#189921,#189922); +#189921 = CARTESIAN_POINT('',(100.477455,-86.066689,1.585)); +#189922 = VECTOR('',#189923,1.); +#189923 = DIRECTION('',(-0.948682575567,0.316229933459,0.)); +#189924 = ORIENTED_EDGE('',*,*,#189925,.T.); +#189925 = EDGE_CURVE('',#189918,#189926,#189928,.T.); +#189926 = VERTEX_POINT('',#189927); +#189927 = CARTESIAN_POINT('',(100.137926,-86.022919,1.585)); +#189928 = LINE('',#189929,#189930); +#189929 = CARTESIAN_POINT('',(100.346146,-86.022919,1.585)); +#189930 = VECTOR('',#189931,1.); +#189931 = DIRECTION('',(-1.,0.,0.)); +#189932 = ORIENTED_EDGE('',*,*,#189933,.T.); +#189933 = EDGE_CURVE('',#189926,#189934,#189936,.T.); +#189934 = VERTEX_POINT('',#189935); +#189935 = CARTESIAN_POINT('',(100.004745,-86.1561,1.585)); +#189936 = CIRCLE('',#189937,0.18686440374); +#189937 = AXIS2_PLACEMENT_3D('',#189938,#189939,#189940); +#189938 = CARTESIAN_POINT('',(100.185462,-86.203636,1.585)); +#189939 = DIRECTION('',(0.,0.,1.)); +#189940 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#189941 = ORIENTED_EDGE('',*,*,#189942,.T.); +#189942 = EDGE_CURVE('',#189934,#189943,#189945,.T.); +#189943 = VERTEX_POINT('',#189944); +#189944 = CARTESIAN_POINT('',(100.004745,-86.215928,1.585)); +#189945 = LINE('',#189946,#189947); +#189946 = CARTESIAN_POINT('',(100.004745,-86.1561,1.585)); +#189947 = VECTOR('',#189948,1.); +#189948 = DIRECTION('',(0.,-1.,0.)); +#189949 = ORIENTED_EDGE('',*,*,#189950,.T.); +#189950 = EDGE_CURVE('',#189943,#189951,#189953,.T.); +#189951 = VERTEX_POINT('',#189952); +#189952 = CARTESIAN_POINT('',(100.039003,-86.284444,1.585)); +#189953 = LINE('',#189954,#189955); +#189954 = CARTESIAN_POINT('',(100.004745,-86.215928,1.585)); +#189955 = VECTOR('',#189956,1.); +#189956 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#189957 = ORIENTED_EDGE('',*,*,#189958,.T.); +#189958 = EDGE_CURVE('',#189951,#189959,#189961,.T.); +#189959 = VERTEX_POINT('',#189960); +#189960 = CARTESIAN_POINT('',(100.06941,-86.314851,1.585)); +#189961 = LINE('',#189962,#189963); +#189962 = CARTESIAN_POINT('',(100.039003,-86.284444,1.585)); +#189963 = VECTOR('',#189964,1.); +#189964 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#189965 = ORIENTED_EDGE('',*,*,#189966,.T.); +#189966 = EDGE_CURVE('',#189959,#189967,#189969,.T.); +#189967 = VERTEX_POINT('',#189968); +#189968 = CARTESIAN_POINT('',(100.146397,-86.353344,1.585)); +#189969 = LINE('',#189970,#189971); +#189970 = CARTESIAN_POINT('',(100.06941,-86.314851,1.585)); +#189971 = VECTOR('',#189972,1.); +#189972 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#189973 = ORIENTED_EDGE('',*,*,#189974,.T.); +#189974 = EDGE_CURVE('',#189967,#189975,#189977,.T.); +#189975 = VERTEX_POINT('',#189976); +#189976 = CARTESIAN_POINT('',(100.344238,-86.404646,1.585)); +#189977 = LINE('',#189978,#189979); +#189978 = CARTESIAN_POINT('',(100.146397,-86.353344,1.585)); +#189979 = VECTOR('',#189980,1.); +#189980 = DIRECTION('',(0.967985143201,-0.251007494991,0.)); +#189981 = ORIENTED_EDGE('',*,*,#189982,.T.); +#189982 = EDGE_CURVE('',#189975,#189983,#189985,.T.); +#189983 = VERTEX_POINT('',#189984); +#189984 = CARTESIAN_POINT('',(100.453218,-86.461595,1.585)); +#189985 = LINE('',#189986,#189987); +#189986 = CARTESIAN_POINT('',(100.344238,-86.404646,1.585)); +#189987 = VECTOR('',#189988,1.); +#189988 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#189989 = ORIENTED_EDGE('',*,*,#189990,.T.); +#189990 = EDGE_CURVE('',#189983,#189991,#189993,.T.); +#189991 = VERTEX_POINT('',#189992); +#189992 = CARTESIAN_POINT('',(100.516671,-86.527125,1.585)); +#189993 = LINE('',#189994,#189995); +#189994 = CARTESIAN_POINT('',(100.453218,-86.461595,1.585)); +#189995 = VECTOR('',#189996,1.); +#189996 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#189997 = ORIENTED_EDGE('',*,*,#189998,.T.); +#189998 = EDGE_CURVE('',#189991,#189999,#190001,.T.); +#189999 = VERTEX_POINT('',#190000); +#190000 = CARTESIAN_POINT('',(100.511305,-86.899963,1.585)); +#190001 = CIRCLE('',#190002,0.290999251663); +#190002 = AXIS2_PLACEMENT_3D('',#190003,#190004,#190005); +#190003 = CARTESIAN_POINT('',(100.2905803369,-86.7103286477,1.585)); +#190004 = DIRECTION('',(0.,0.,-1.)); +#190005 = DIRECTION('',(0.776945857418,0.629567418662,0.)); +#190006 = ORIENTED_EDGE('',*,*,#190007,.T.); +#190007 = EDGE_CURVE('',#189999,#190008,#190010,.T.); +#190008 = VERTEX_POINT('',#190009); +#190009 = CARTESIAN_POINT('',(100.445775,-86.963417,1.585)); +#190010 = LINE('',#190011,#190012); +#190011 = CARTESIAN_POINT('',(100.511305,-86.899963,1.585)); +#190012 = VECTOR('',#190013,1.); +#190013 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#190014 = ORIENTED_EDGE('',*,*,#190015,.T.); +#190015 = EDGE_CURVE('',#190008,#190016,#190018,.T.); +#190016 = VERTEX_POINT('',#190017); +#190017 = CARTESIAN_POINT('',(100.325329,-87.021478,1.585)); +#190018 = LINE('',#190019,#190020); +#190019 = CARTESIAN_POINT('',(100.445775,-86.963417,1.585)); +#190020 = VECTOR('',#190021,1.); +#190021 = DIRECTION('',(-0.900801384651,-0.434231350101,0.)); +#190022 = ORIENTED_EDGE('',*,*,#190023,.T.); +#190023 = EDGE_CURVE('',#190016,#190024,#190026,.T.); +#190024 = VERTEX_POINT('',#190025); +#190025 = CARTESIAN_POINT('',(100.056139,-87.020719,1.585)); +#190026 = LINE('',#190027,#190028); +#190027 = CARTESIAN_POINT('',(100.325329,-87.021478,1.585)); +#190028 = VECTOR('',#190029,1.); +#190029 = DIRECTION('',(-0.999996025037,2.819558612894E-03,0.)); +#190030 = ORIENTED_EDGE('',*,*,#190031,.T.); +#190031 = EDGE_CURVE('',#190024,#190032,#190034,.T.); +#190032 = VERTEX_POINT('',#190033); +#190033 = CARTESIAN_POINT('',(99.892602,-86.965457,1.585)); +#190034 = LINE('',#190035,#190036); +#190035 = CARTESIAN_POINT('',(100.056139,-87.020719,1.585)); +#190036 = VECTOR('',#190037,1.); +#190037 = DIRECTION('',(-0.94737239725,0.320133629801,0.)); +#190038 = ORIENTED_EDGE('',*,*,#190039,.T.); +#190039 = EDGE_CURVE('',#190032,#190040,#190042,.T.); +#190040 = VERTEX_POINT('',#190041); +#190041 = CARTESIAN_POINT('',(99.953462,-86.829149,1.585)); +#190042 = CIRCLE('',#190043,7.50000151955E-02); +#190043 = AXIS2_PLACEMENT_3D('',#190044,#190045,#190046); +#190044 = CARTESIAN_POINT('',(99.929745099963,-86.90030032417,1.585)); +#190045 = DIRECTION('',(0.,0.,-1.)); +#190046 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#190047 = ORIENTED_EDGE('',*,*,#190048,.T.); +#190048 = EDGE_CURVE('',#190040,#190049,#190051,.T.); +#190049 = VERTEX_POINT('',#190050); +#190050 = CARTESIAN_POINT('',(100.084772,-86.872919,1.585)); +#190051 = LINE('',#190052,#190053); +#190052 = CARTESIAN_POINT('',(99.953462,-86.829149,1.585)); +#190053 = VECTOR('',#190054,1.); +#190054 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#190055 = ORIENTED_EDGE('',*,*,#190056,.T.); +#190056 = EDGE_CURVE('',#190049,#190057,#190059,.T.); +#190057 = VERTEX_POINT('',#190058); +#190058 = CARTESIAN_POINT('',(100.292992,-86.872919,1.585)); +#190059 = LINE('',#190060,#190061); +#190060 = CARTESIAN_POINT('',(100.084772,-86.872919,1.585)); +#190061 = VECTOR('',#190062,1.); +#190062 = DIRECTION('',(1.,0.,0.)); +#190063 = ORIENTED_EDGE('',*,*,#190064,.T.); +#190064 = EDGE_CURVE('',#190057,#190065,#190067,.T.); +#190065 = VERTEX_POINT('',#190066); +#190066 = CARTESIAN_POINT('',(100.426173,-86.739737,1.585)); +#190067 = CIRCLE('',#190068,0.186867760544); +#190068 = AXIS2_PLACEMENT_3D('',#190069,#190070,#190071); +#190069 = CARTESIAN_POINT('',(100.24545296928,-86.69219932622,1.585)); +#190070 = DIRECTION('',(0.,0.,1.)); +#190071 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#190072 = ORIENTED_EDGE('',*,*,#190073,.T.); +#190073 = EDGE_CURVE('',#190065,#190074,#190076,.T.); +#190074 = VERTEX_POINT('',#190075); +#190075 = CARTESIAN_POINT('',(100.426173,-86.679909,1.585)); +#190076 = LINE('',#190077,#190078); +#190077 = CARTESIAN_POINT('',(100.426173,-86.739737,1.585)); +#190078 = VECTOR('',#190079,1.); +#190079 = DIRECTION('',(0.,1.,0.)); +#190080 = ORIENTED_EDGE('',*,*,#190081,.T.); +#190081 = EDGE_CURVE('',#190074,#190082,#190084,.T.); +#190082 = VERTEX_POINT('',#190083); +#190083 = CARTESIAN_POINT('',(100.391915,-86.611393,1.585)); +#190084 = LINE('',#190085,#190086); +#190085 = CARTESIAN_POINT('',(100.426173,-86.679909,1.585)); +#190086 = VECTOR('',#190087,1.); +#190087 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#190088 = ORIENTED_EDGE('',*,*,#190089,.T.); +#190089 = EDGE_CURVE('',#190082,#190090,#190092,.T.); +#190090 = VERTEX_POINT('',#190091); +#190091 = CARTESIAN_POINT('',(100.361508,-86.580986,1.585)); +#190092 = LINE('',#190093,#190094); +#190093 = CARTESIAN_POINT('',(100.391915,-86.611393,1.585)); +#190094 = VECTOR('',#190095,1.); +#190095 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#190096 = ORIENTED_EDGE('',*,*,#190097,.T.); +#190097 = EDGE_CURVE('',#190090,#190098,#190100,.T.); +#190098 = VERTEX_POINT('',#190099); +#190099 = CARTESIAN_POINT('',(100.284521,-86.542492,1.585)); +#190100 = LINE('',#190101,#190102); +#190101 = CARTESIAN_POINT('',(100.361508,-86.580986,1.585)); +#190102 = VECTOR('',#190103,1.); +#190103 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#190104 = ORIENTED_EDGE('',*,*,#190105,.T.); +#190105 = EDGE_CURVE('',#190098,#190106,#190108,.T.); +#190106 = VERTEX_POINT('',#190107); +#190107 = CARTESIAN_POINT('',(100.08668,-86.491191,1.585)); +#190108 = LINE('',#190109,#190110); +#190109 = CARTESIAN_POINT('',(100.284521,-86.542492,1.585)); +#190110 = VECTOR('',#190111,1.); +#190111 = DIRECTION('',(-0.967986331989,0.251002910506,0.)); +#190112 = ORIENTED_EDGE('',*,*,#190113,.T.); +#190113 = EDGE_CURVE('',#190106,#190114,#190116,.T.); +#190114 = VERTEX_POINT('',#190115); +#190115 = CARTESIAN_POINT('',(99.977699,-86.434241,1.585)); +#190116 = LINE('',#190117,#190118); +#190117 = CARTESIAN_POINT('',(100.08668,-86.491191,1.585)); +#190118 = VECTOR('',#190119,1.); +#190119 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#190120 = ORIENTED_EDGE('',*,*,#190121,.T.); +#190121 = EDGE_CURVE('',#190114,#190122,#190124,.T.); +#190122 = VERTEX_POINT('',#190123); +#190123 = CARTESIAN_POINT('',(99.914246,-86.368711,1.585)); +#190124 = LINE('',#190125,#190126); +#190125 = CARTESIAN_POINT('',(99.977699,-86.434241,1.585)); +#190126 = VECTOR('',#190127,1.); +#190127 = DIRECTION('',(-0.695630129574,0.718400113328,0.)); +#190128 = ORIENTED_EDGE('',*,*,#190129,.T.); +#190129 = EDGE_CURVE('',#190122,#190130,#190132,.T.); +#190130 = VERTEX_POINT('',#190131); +#190131 = CARTESIAN_POINT('',(99.919612,-85.995873,1.585)); +#190132 = CIRCLE('',#190133,0.291002094877); +#190133 = AXIS2_PLACEMENT_3D('',#190134,#190135,#190136); +#190134 = CARTESIAN_POINT('',(100.14034036573,-86.18550740558,1.585)); +#190135 = DIRECTION('',(0.,0.,-1.)); +#190136 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#190137 = ORIENTED_EDGE('',*,*,#190138,.T.); +#190138 = EDGE_CURVE('',#190130,#189883,#190139,.T.); +#190139 = LINE('',#190140,#190141); +#190140 = CARTESIAN_POINT('',(99.919612,-85.995873,1.585)); +#190141 = VECTOR('',#190142,1.); +#190142 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#190143 = PLANE('',#190144); +#190144 = AXIS2_PLACEMENT_3D('',#190145,#190146,#190147); +#190145 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190146 = DIRECTION('',(0.,0.,1.)); +#190147 = DIRECTION('',(1.,0.,-0.)); +#190148 = SHELL_BASED_SURFACE_MODEL('',(#190149)); +#190149 = OPEN_SHELL('',(#190150)); +#190150 = ADVANCED_FACE('',(#190151),#190392,.T.); +#190151 = FACE_BOUND('',#190152,.F.); +#190152 = EDGE_LOOP('',(#190153,#190164,#190172,#190180,#190188,#190196, + #190205,#190213,#190222,#190230,#190238,#190246,#190254,#190262, + #190270,#190279,#190287,#190295,#190303,#190311,#190320,#190328, + #190336,#190344,#190353,#190361,#190369,#190377,#190386)); +#190153 = ORIENTED_EDGE('',*,*,#190154,.T.); +#190154 = EDGE_CURVE('',#190155,#190157,#190159,.T.); +#190155 = VERTEX_POINT('',#190156); +#190156 = CARTESIAN_POINT('',(151.008882,-85.757142,1.585)); +#190157 = VERTEX_POINT('',#190158); +#190158 = CARTESIAN_POINT('',(151.073882,-85.692142,1.585)); +#190159 = CIRCLE('',#190160,6.500103935393E-02); +#190160 = AXIS2_PLACEMENT_3D('',#190161,#190162,#190163); +#190161 = CARTESIAN_POINT('',(151.07388303934,-85.75714303934,1.585)); +#190162 = DIRECTION('',(0.,0.,-1.)); +#190163 = DIRECTION('',(-0.999999999872,1.598967714806E-05,0.)); +#190164 = ORIENTED_EDGE('',*,*,#190165,.T.); +#190165 = EDGE_CURVE('',#190157,#190166,#190168,.T.); +#190166 = VERTEX_POINT('',#190167); +#190167 = CARTESIAN_POINT('',(151.373882,-85.692142,1.585)); +#190168 = LINE('',#190169,#190170); +#190169 = CARTESIAN_POINT('',(151.073882,-85.692142,1.585)); +#190170 = VECTOR('',#190171,1.); +#190171 = DIRECTION('',(1.,0.,0.)); +#190172 = ORIENTED_EDGE('',*,*,#190173,.T.); +#190173 = EDGE_CURVE('',#190166,#190174,#190176,.T.); +#190174 = VERTEX_POINT('',#190175); +#190175 = CARTESIAN_POINT('',(151.398756,-85.69709,1.585)); +#190176 = LINE('',#190177,#190178); +#190177 = CARTESIAN_POINT('',(151.373882,-85.692142,1.585)); +#190178 = VECTOR('',#190179,1.); +#190179 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#190180 = ORIENTED_EDGE('',*,*,#190181,.T.); +#190181 = EDGE_CURVE('',#190174,#190182,#190184,.T.); +#190182 = VERTEX_POINT('',#190183); +#190183 = CARTESIAN_POINT('',(151.419843,-85.71118,1.585)); +#190184 = LINE('',#190185,#190186); +#190185 = CARTESIAN_POINT('',(151.398756,-85.69709,1.585)); +#190186 = VECTOR('',#190187,1.); +#190187 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#190188 = ORIENTED_EDGE('',*,*,#190189,.T.); +#190189 = EDGE_CURVE('',#190182,#190190,#190192,.T.); +#190190 = VERTEX_POINT('',#190191); +#190191 = CARTESIAN_POINT('',(151.471003,-85.766461,1.585)); +#190192 = LINE('',#190193,#190194); +#190193 = CARTESIAN_POINT('',(151.419843,-85.71118,1.585)); +#190194 = VECTOR('',#190195,1.); +#190195 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#190196 = ORIENTED_EDGE('',*,*,#190197,.T.); +#190197 = EDGE_CURVE('',#190190,#190198,#190200,.T.); +#190198 = VERTEX_POINT('',#190199); +#190199 = CARTESIAN_POINT('',(151.470999,-86.176399,1.585)); +#190200 = CIRCLE('',#190201,0.409312568567); +#190201 = AXIS2_PLACEMENT_3D('',#190202,#190203,#190204); +#190202 = CARTESIAN_POINT('',(151.11670664806,-85.97142654294,1.585)); +#190203 = DIRECTION('',(0.,0.,-1.)); +#190204 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#190205 = ORIENTED_EDGE('',*,*,#190206,.T.); +#190206 = EDGE_CURVE('',#190198,#190207,#190209,.T.); +#190207 = VERTEX_POINT('',#190208); +#190208 = CARTESIAN_POINT('',(151.368322,-86.280322,1.585)); +#190209 = LINE('',#190210,#190211); +#190210 = CARTESIAN_POINT('',(151.470999,-86.176399,1.585)); +#190211 = VECTOR('',#190212,1.); +#190212 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#190213 = ORIENTED_EDGE('',*,*,#190214,.T.); +#190214 = EDGE_CURVE('',#190207,#190215,#190217,.T.); +#190215 = VERTEX_POINT('',#190216); +#190216 = CARTESIAN_POINT('',(150.929546,-86.377344,1.585)); +#190217 = CIRCLE('',#190218,0.675422176574); +#190218 = AXIS2_PLACEMENT_3D('',#190219,#190220,#190221); +#190219 = CARTESIAN_POINT('',(151.01141275007,-85.70690164465,1.585)); +#190220 = DIRECTION('',(0.,0.,-1.)); +#190221 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#190222 = ORIENTED_EDGE('',*,*,#190223,.T.); +#190223 = EDGE_CURVE('',#190215,#190224,#190226,.T.); +#190224 = VERTEX_POINT('',#190225); +#190225 = CARTESIAN_POINT('',(150.744813,-86.329566,1.585)); +#190226 = LINE('',#190227,#190228); +#190227 = CARTESIAN_POINT('',(150.929546,-86.377344,1.585)); +#190228 = VECTOR('',#190229,1.); +#190229 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#190230 = ORIENTED_EDGE('',*,*,#190231,.T.); +#190231 = EDGE_CURVE('',#190224,#190232,#190234,.T.); +#190232 = VERTEX_POINT('',#190233); +#190233 = CARTESIAN_POINT('',(150.642206,-86.274533,1.585)); +#190234 = LINE('',#190235,#190236); +#190235 = CARTESIAN_POINT('',(150.744813,-86.329566,1.585)); +#190236 = VECTOR('',#190237,1.); +#190237 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#190238 = ORIENTED_EDGE('',*,*,#190239,.T.); +#190239 = EDGE_CURVE('',#190232,#190240,#190242,.T.); +#190240 = VERTEX_POINT('',#190241); +#190241 = CARTESIAN_POINT('',(150.548191,-86.176395,1.585)); +#190242 = LINE('',#190243,#190244); +#190243 = CARTESIAN_POINT('',(150.642206,-86.274533,1.585)); +#190244 = VECTOR('',#190245,1.); +#190245 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#190246 = ORIENTED_EDGE('',*,*,#190247,.T.); +#190247 = EDGE_CURVE('',#190240,#190248,#190250,.T.); +#190248 = VERTEX_POINT('',#190249); +#190249 = CARTESIAN_POINT('',(150.49663,-86.024507,1.585)); +#190250 = LINE('',#190251,#190252); +#190251 = CARTESIAN_POINT('',(150.548191,-86.176395,1.585)); +#190252 = VECTOR('',#190253,1.); +#190253 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#190254 = ORIENTED_EDGE('',*,*,#190255,.T.); +#190255 = EDGE_CURVE('',#190248,#190256,#190258,.T.); +#190256 = VERTEX_POINT('',#190257); +#190257 = CARTESIAN_POINT('',(150.497512,-85.871057,1.585)); +#190258 = LINE('',#190259,#190260); +#190259 = CARTESIAN_POINT('',(150.49663,-86.024507,1.585)); +#190260 = VECTOR('',#190261,1.); +#190261 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#190262 = ORIENTED_EDGE('',*,*,#190263,.T.); +#190263 = EDGE_CURVE('',#190256,#190264,#190266,.T.); +#190264 = VERTEX_POINT('',#190265); +#190265 = CARTESIAN_POINT('',(150.544316,-85.77093,1.585)); +#190266 = LINE('',#190267,#190268); +#190267 = CARTESIAN_POINT('',(150.497512,-85.871057,1.585)); +#190268 = VECTOR('',#190269,1.); +#190269 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#190270 = ORIENTED_EDGE('',*,*,#190271,.T.); +#190271 = EDGE_CURVE('',#190264,#190272,#190274,.T.); +#190272 = VERTEX_POINT('',#190273); +#190273 = CARTESIAN_POINT('',(150.660592,-85.829068,1.585)); +#190274 = CIRCLE('',#190275,6.500026004258E-02); +#190275 = AXIS2_PLACEMENT_3D('',#190276,#190277,#190278); +#190276 = CARTESIAN_POINT('',(150.60245365279,-85.7999996944,1.585)); +#190277 = DIRECTION('',(0.,0.,-1.)); +#190278 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#190279 = ORIENTED_EDGE('',*,*,#190280,.T.); +#190280 = EDGE_CURVE('',#190272,#190281,#190283,.T.); +#190281 = VERTEX_POINT('',#190282); +#190282 = CARTESIAN_POINT('',(150.624597,-85.901058,1.585)); +#190283 = LINE('',#190284,#190285); +#190284 = CARTESIAN_POINT('',(150.660592,-85.829068,1.585)); +#190285 = VECTOR('',#190286,1.); +#190286 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#190287 = ORIENTED_EDGE('',*,*,#190288,.T.); +#190288 = EDGE_CURVE('',#190281,#190289,#190291,.T.); +#190289 = VERTEX_POINT('',#190290); +#190290 = CARTESIAN_POINT('',(150.624597,-86.003738,1.585)); +#190291 = LINE('',#190292,#190293); +#190292 = CARTESIAN_POINT('',(150.624597,-85.901058,1.585)); +#190293 = VECTOR('',#190294,1.); +#190294 = DIRECTION('',(0.,-1.,0.)); +#190295 = ORIENTED_EDGE('',*,*,#190296,.T.); +#190296 = EDGE_CURVE('',#190289,#190297,#190299,.T.); +#190297 = VERTEX_POINT('',#190298); +#190298 = CARTESIAN_POINT('',(150.659265,-86.107743,1.585)); +#190299 = LINE('',#190300,#190301); +#190300 = CARTESIAN_POINT('',(150.624597,-86.003738,1.585)); +#190301 = VECTOR('',#190302,1.); +#190302 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#190303 = ORIENTED_EDGE('',*,*,#190304,.T.); +#190304 = EDGE_CURVE('',#190297,#190305,#190307,.T.); +#190305 = VERTEX_POINT('',#190306); +#190306 = CARTESIAN_POINT('',(150.726669,-86.175149,1.585)); +#190307 = LINE('',#190308,#190309); +#190308 = CARTESIAN_POINT('',(150.659265,-86.107743,1.585)); +#190309 = VECTOR('',#190310,1.); +#190310 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#190311 = ORIENTED_EDGE('',*,*,#190312,.T.); +#190312 = EDGE_CURVE('',#190305,#190313,#190315,.T.); +#190313 = VERTEX_POINT('',#190314); +#190314 = CARTESIAN_POINT('',(151.065881,-86.249285,1.585)); +#190315 = CIRCLE('',#190316,0.553317785495); +#190316 = AXIS2_PLACEMENT_3D('',#190317,#190318,#190319); +#190317 = CARTESIAN_POINT('',(151.0084500839,-85.69895576979,1.585)); +#190318 = DIRECTION('',(0.,0.,1.)); +#190319 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#190320 = ORIENTED_EDGE('',*,*,#190321,.T.); +#190321 = EDGE_CURVE('',#190313,#190322,#190324,.T.); +#190322 = VERTEX_POINT('',#190323); +#190323 = CARTESIAN_POINT('',(151.222622,-86.210099,1.585)); +#190324 = LINE('',#190325,#190326); +#190325 = CARTESIAN_POINT('',(151.065881,-86.249285,1.585)); +#190326 = VECTOR('',#190327,1.); +#190327 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#190328 = ORIENTED_EDGE('',*,*,#190329,.T.); +#190329 = EDGE_CURVE('',#190322,#190330,#190332,.T.); +#190330 = VERTEX_POINT('',#190331); +#190331 = CARTESIAN_POINT('',(151.292522,-86.17515,1.585)); +#190332 = LINE('',#190333,#190334); +#190333 = CARTESIAN_POINT('',(151.222622,-86.210099,1.585)); +#190334 = VECTOR('',#190335,1.); +#190335 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#190336 = ORIENTED_EDGE('',*,*,#190337,.T.); +#190337 = EDGE_CURVE('',#190330,#190338,#190340,.T.); +#190338 = VERTEX_POINT('',#190339); +#190339 = CARTESIAN_POINT('',(151.359928,-86.107743,1.585)); +#190340 = LINE('',#190341,#190342); +#190341 = CARTESIAN_POINT('',(151.292522,-86.17515,1.585)); +#190342 = VECTOR('',#190343,1.); +#190343 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#190344 = ORIENTED_EDGE('',*,*,#190345,.T.); +#190345 = EDGE_CURVE('',#190338,#190346,#190348,.T.); +#190346 = VERTEX_POINT('',#190347); +#190347 = CARTESIAN_POINT('',(151.359928,-85.835111,1.585)); +#190348 = CIRCLE('',#190349,0.272194686174); +#190349 = AXIS2_PLACEMENT_3D('',#190350,#190351,#190352); +#190350 = CARTESIAN_POINT('',(151.12432686391,-85.971427,1.585)); +#190351 = DIRECTION('',(0.,-0.,1.)); +#190352 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#190353 = ORIENTED_EDGE('',*,*,#190354,.T.); +#190354 = EDGE_CURVE('',#190346,#190355,#190357,.T.); +#190355 = VERTEX_POINT('',#190356); +#190356 = CARTESIAN_POINT('',(151.346959,-85.822142,1.585)); +#190357 = LINE('',#190358,#190359); +#190358 = CARTESIAN_POINT('',(151.359928,-85.835111,1.585)); +#190359 = VECTOR('',#190360,1.); +#190360 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#190361 = ORIENTED_EDGE('',*,*,#190362,.T.); +#190362 = EDGE_CURVE('',#190355,#190363,#190365,.T.); +#190363 = VERTEX_POINT('',#190364); +#190364 = CARTESIAN_POINT('',(151.138882,-85.822142,1.585)); +#190365 = LINE('',#190366,#190367); +#190366 = CARTESIAN_POINT('',(151.346959,-85.822142,1.585)); +#190367 = VECTOR('',#190368,1.); +#190368 = DIRECTION('',(-1.,0.,0.)); +#190369 = ORIENTED_EDGE('',*,*,#190370,.T.); +#190370 = EDGE_CURVE('',#190363,#190371,#190373,.T.); +#190371 = VERTEX_POINT('',#190372); +#190372 = CARTESIAN_POINT('',(151.138882,-85.928571,1.585)); +#190373 = LINE('',#190374,#190375); +#190374 = CARTESIAN_POINT('',(151.138882,-85.822142,1.585)); +#190375 = VECTOR('',#190376,1.); +#190376 = DIRECTION('',(0.,-1.,0.)); +#190377 = ORIENTED_EDGE('',*,*,#190378,.T.); +#190378 = EDGE_CURVE('',#190371,#190379,#190381,.T.); +#190379 = VERTEX_POINT('',#190380); +#190380 = CARTESIAN_POINT('',(151.008882,-85.928571,1.585)); +#190381 = CIRCLE('',#190382,6.500000000092E-02); +#190382 = AXIS2_PLACEMENT_3D('',#190383,#190384,#190385); +#190383 = CARTESIAN_POINT('',(151.073882,-85.92857065513,1.585)); +#190384 = DIRECTION('',(-0.,0.,-1.)); +#190385 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#190386 = ORIENTED_EDGE('',*,*,#190387,.T.); +#190387 = EDGE_CURVE('',#190379,#190155,#190388,.T.); +#190388 = LINE('',#190389,#190390); +#190389 = CARTESIAN_POINT('',(151.008882,-85.928571,1.585)); +#190390 = VECTOR('',#190391,1.); +#190391 = DIRECTION('',(0.,1.,0.)); +#190392 = PLANE('',#190393); +#190393 = AXIS2_PLACEMENT_3D('',#190394,#190395,#190396); +#190394 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190395 = DIRECTION('',(0.,0.,1.)); +#190396 = DIRECTION('',(1.,0.,-0.)); +#190397 = SHELL_BASED_SURFACE_MODEL('',(#190398)); +#190398 = OPEN_SHELL('',(#190399)); +#190399 = ADVANCED_FACE('',(#190400),#190559,.T.); +#190400 = FACE_BOUND('',#190401,.F.); +#190401 = EDGE_LOOP('',(#190402,#190413,#190421,#190429,#190437,#190445, + #190453,#190461,#190470,#190478,#190487,#190495,#190503,#190511, + #190520,#190528,#190536,#190544,#190553)); +#190402 = ORIENTED_EDGE('',*,*,#190403,.T.); +#190403 = EDGE_CURVE('',#190404,#190406,#190408,.T.); +#190404 = VERTEX_POINT('',#190405); +#190405 = CARTESIAN_POINT('',(128.300966,-85.110456,1.585)); +#190406 = VERTEX_POINT('',#190407); +#190407 = CARTESIAN_POINT('',(128.810361,-85.119786,1.585)); +#190408 = CIRCLE('',#190409,0.450326844012); +#190409 = AXIS2_PLACEMENT_3D('',#190410,#190411,#190412); +#190410 = CARTESIAN_POINT('',(128.5488630301,-85.48640989199,1.585)); +#190411 = DIRECTION('',(0.,0.,-1.)); +#190412 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#190413 = ORIENTED_EDGE('',*,*,#190414,.T.); +#190414 = EDGE_CURVE('',#190406,#190415,#190417,.T.); +#190415 = VERTEX_POINT('',#190416); +#190416 = CARTESIAN_POINT('',(128.873814,-85.185316,1.585)); +#190417 = LINE('',#190418,#190419); +#190418 = CARTESIAN_POINT('',(128.810361,-85.119786,1.585)); +#190419 = VECTOR('',#190420,1.); +#190420 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#190421 = ORIENTED_EDGE('',*,*,#190422,.T.); +#190422 = EDGE_CURVE('',#190415,#190423,#190425,.T.); +#190423 = VERTEX_POINT('',#190424); +#190424 = CARTESIAN_POINT('',(128.931875,-85.305763,1.585)); +#190425 = LINE('',#190426,#190427); +#190426 = CARTESIAN_POINT('',(128.873814,-85.185316,1.585)); +#190427 = VECTOR('',#190428,1.); +#190428 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#190429 = ORIENTED_EDGE('',*,*,#190430,.T.); +#190430 = EDGE_CURVE('',#190423,#190431,#190433,.T.); +#190431 = VERTEX_POINT('',#190432); +#190432 = CARTESIAN_POINT('',(128.931116,-85.432095,1.585)); +#190433 = LINE('',#190434,#190435); +#190434 = CARTESIAN_POINT('',(128.931875,-85.305763,1.585)); +#190435 = VECTOR('',#190436,1.); +#190436 = DIRECTION('',(-6.007870547433E-03,-0.999981952583,0.)); +#190437 = ORIENTED_EDGE('',*,*,#190438,.T.); +#190438 = EDGE_CURVE('',#190431,#190439,#190441,.T.); +#190439 = VERTEX_POINT('',#190440); +#190440 = CARTESIAN_POINT('',(128.873058,-85.600158,1.585)); +#190441 = LINE('',#190442,#190443); +#190442 = CARTESIAN_POINT('',(128.931116,-85.432095,1.585)); +#190443 = VECTOR('',#190444,1.); +#190444 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#190445 = ORIENTED_EDGE('',*,*,#190446,.T.); +#190446 = EDGE_CURVE('',#190439,#190447,#190449,.T.); +#190447 = VERTEX_POINT('',#190448); +#190448 = CARTESIAN_POINT('',(128.420335,-86.054919,1.585)); +#190449 = LINE('',#190450,#190451); +#190450 = CARTESIAN_POINT('',(128.873058,-85.600158,1.585)); +#190451 = VECTOR('',#190452,1.); +#190452 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#190453 = ORIENTED_EDGE('',*,*,#190454,.T.); +#190454 = EDGE_CURVE('',#190447,#190455,#190457,.T.); +#190455 = VERTEX_POINT('',#190456); +#190456 = CARTESIAN_POINT('',(128.872948,-86.05636,1.585)); +#190457 = LINE('',#190458,#190459); +#190458 = CARTESIAN_POINT('',(128.420335,-86.054919,1.585)); +#190459 = VECTOR('',#190460,1.); +#190460 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#190461 = ORIENTED_EDGE('',*,*,#190462,.T.); +#190462 = EDGE_CURVE('',#190455,#190463,#190465,.T.); +#190463 = VERTEX_POINT('',#190464); +#190464 = CARTESIAN_POINT('',(128.858316,-86.204919,1.585)); +#190465 = CIRCLE('',#190466,7.500006711464E-02); +#190466 = AXIS2_PLACEMENT_3D('',#190467,#190468,#190469); +#190467 = CARTESIAN_POINT('',(128.85831606711,-86.12991893288,1.585)); +#190468 = DIRECTION('',(0.,0.,-1.)); +#190469 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#190470 = ORIENTED_EDGE('',*,*,#190471,.T.); +#190471 = EDGE_CURVE('',#190463,#190472,#190474,.T.); +#190472 = VERTEX_POINT('',#190473); +#190473 = CARTESIAN_POINT('',(128.224637,-86.203478,1.585)); +#190474 = LINE('',#190475,#190476); +#190475 = CARTESIAN_POINT('',(128.858316,-86.204919,1.585)); +#190476 = VECTOR('',#190477,1.); +#190477 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#190478 = ORIENTED_EDGE('',*,*,#190479,.T.); +#190479 = EDGE_CURVE('',#190472,#190480,#190482,.T.); +#190480 = VERTEX_POINT('',#190481); +#190481 = CARTESIAN_POINT('',(128.186236,-86.076886,1.585)); +#190482 = CIRCLE('',#190483,7.500021013111E-02); +#190483 = AXIS2_PLACEMENT_3D('',#190484,#190485,#190486); +#190484 = CARTESIAN_POINT('',(128.2392693167,-86.12991899764,1.585)); +#190485 = DIRECTION('',(0.,0.,-1.)); +#190486 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#190487 = ORIENTED_EDGE('',*,*,#190488,.T.); +#190488 = EDGE_CURVE('',#190480,#190489,#190491,.T.); +#190489 = VERTEX_POINT('',#190490); +#190490 = CARTESIAN_POINT('',(128.745144,-85.517976,1.585)); +#190491 = LINE('',#190492,#190493); +#190492 = CARTESIAN_POINT('',(128.186236,-86.076886,1.585)); +#190493 = VECTOR('',#190494,1.); +#190494 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#190495 = ORIENTED_EDGE('',*,*,#190496,.T.); +#190496 = EDGE_CURVE('',#190489,#190497,#190499,.T.); +#190497 = VERTEX_POINT('',#190498); +#190498 = CARTESIAN_POINT('',(128.783316,-85.403463,1.585)); +#190499 = LINE('',#190500,#190501); +#190500 = CARTESIAN_POINT('',(128.745144,-85.517976,1.585)); +#190501 = VECTOR('',#190502,1.); +#190502 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#190503 = ORIENTED_EDGE('',*,*,#190504,.T.); +#190504 = EDGE_CURVE('',#190497,#190505,#190507,.T.); +#190505 = VERTEX_POINT('',#190506); +#190506 = CARTESIAN_POINT('',(128.783316,-85.3381,1.585)); +#190507 = LINE('',#190508,#190509); +#190508 = CARTESIAN_POINT('',(128.783316,-85.403463,1.585)); +#190509 = VECTOR('',#190510,1.); +#190510 = DIRECTION('',(0.,1.,0.)); +#190511 = ORIENTED_EDGE('',*,*,#190512,.T.); +#190512 = EDGE_CURVE('',#190505,#190513,#190515,.T.); +#190513 = VERTEX_POINT('',#190514); +#190514 = CARTESIAN_POINT('',(128.650135,-85.204919,1.585)); +#190515 = CIRCLE('',#190516,0.18686440374); +#190516 = AXIS2_PLACEMENT_3D('',#190517,#190518,#190519); +#190517 = CARTESIAN_POINT('',(128.602599,-85.385636,1.585)); +#190518 = DIRECTION('',(0.,0.,1.)); +#190519 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#190520 = ORIENTED_EDGE('',*,*,#190521,.T.); +#190521 = EDGE_CURVE('',#190513,#190522,#190524,.T.); +#190522 = VERTEX_POINT('',#190523); +#190523 = CARTESIAN_POINT('',(128.44745,-85.204919,1.585)); +#190524 = LINE('',#190525,#190526); +#190525 = CARTESIAN_POINT('',(128.650135,-85.204919,1.585)); +#190526 = VECTOR('',#190527,1.); +#190527 = DIRECTION('',(-1.,0.,0.)); +#190528 = ORIENTED_EDGE('',*,*,#190529,.T.); +#190529 = EDGE_CURVE('',#190522,#190530,#190532,.T.); +#190530 = VERTEX_POINT('',#190531); +#190531 = CARTESIAN_POINT('',(128.378934,-85.239177,1.585)); +#190532 = LINE('',#190533,#190534); +#190533 = CARTESIAN_POINT('',(128.44745,-85.204919,1.585)); +#190534 = VECTOR('',#190535,1.); +#190535 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#190536 = ORIENTED_EDGE('',*,*,#190537,.T.); +#190537 = EDGE_CURVE('',#190530,#190538,#190540,.T.); +#190538 = VERTEX_POINT('',#190539); +#190539 = CARTESIAN_POINT('',(128.328556,-85.287517,1.585)); +#190540 = LINE('',#190541,#190542); +#190541 = CARTESIAN_POINT('',(128.378934,-85.239177,1.585)); +#190542 = VECTOR('',#190543,1.); +#190543 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#190544 = ORIENTED_EDGE('',*,*,#190545,.T.); +#190545 = EDGE_CURVE('',#190538,#190546,#190548,.T.); +#190546 = VERTEX_POINT('',#190547); +#190547 = CARTESIAN_POINT('',(128.233855,-85.172124,1.585)); +#190548 = CIRCLE('',#190549,7.499996838526E-02); +#190549 = AXIS2_PLACEMENT_3D('',#190550,#190551,#190552); +#190550 = CARTESIAN_POINT('',(128.286888,-85.22515697246,1.585)); +#190551 = DIRECTION('',(0.,0.,-1.)); +#190552 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#190553 = ORIENTED_EDGE('',*,*,#190554,.T.); +#190554 = EDGE_CURVE('',#190546,#190404,#190555,.T.); +#190555 = LINE('',#190556,#190557); +#190556 = CARTESIAN_POINT('',(128.233855,-85.172124,1.585)); +#190557 = VECTOR('',#190558,1.); +#190558 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#190559 = PLANE('',#190560); +#190560 = AXIS2_PLACEMENT_3D('',#190561,#190562,#190563); +#190561 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190562 = DIRECTION('',(0.,0.,1.)); +#190563 = DIRECTION('',(1.,0.,-0.)); +#190564 = SHELL_BASED_SURFACE_MODEL('',(#190565)); +#190565 = OPEN_SHELL('',(#190566)); +#190566 = ADVANCED_FACE('',(#190567),#190636,.T.); +#190567 = FACE_BOUND('',#190568,.F.); +#190568 = EDGE_LOOP('',(#190569,#190580,#190588,#190597,#190605,#190613, + #190622,#190630)); +#190569 = ORIENTED_EDGE('',*,*,#190570,.T.); +#190570 = EDGE_CURVE('',#190571,#190573,#190575,.T.); +#190571 = VERTEX_POINT('',#190572); +#190572 = CARTESIAN_POINT('',(126.415113,-85.203478,1.585)); +#190573 = VERTEX_POINT('',#190574); +#190574 = CARTESIAN_POINT('',(126.429745,-85.054919,1.585)); +#190575 = CIRCLE('',#190576,7.500006711464E-02); +#190576 = AXIS2_PLACEMENT_3D('',#190577,#190578,#190579); +#190577 = CARTESIAN_POINT('',(126.42974493288,-85.12991906711,1.585)); +#190578 = DIRECTION('',(0.,0.,-1.)); +#190579 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#190580 = ORIENTED_EDGE('',*,*,#190581,.T.); +#190581 = EDGE_CURVE('',#190573,#190582,#190584,.T.); +#190582 = VERTEX_POINT('',#190583); +#190583 = CARTESIAN_POINT('',(127.015805,-85.05636,1.585)); +#190584 = LINE('',#190585,#190586); +#190585 = CARTESIAN_POINT('',(126.429745,-85.054919,1.585)); +#190586 = VECTOR('',#190587,1.); +#190587 = DIRECTION('',(0.999996977183,-2.45878518261E-03,0.)); +#190588 = ORIENTED_EDGE('',*,*,#190589,.T.); +#190589 = EDGE_CURVE('',#190582,#190590,#190592,.T.); +#190590 = VERTEX_POINT('',#190591); +#190591 = CARTESIAN_POINT('',(127.001173,-85.204919,1.585)); +#190592 = CIRCLE('',#190593,7.500006711464E-02); +#190593 = AXIS2_PLACEMENT_3D('',#190594,#190595,#190596); +#190594 = CARTESIAN_POINT('',(127.00117306711,-85.12991893288,1.585)); +#190595 = DIRECTION('',(0.,0.,-1.)); +#190596 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#190597 = ORIENTED_EDGE('',*,*,#190598,.T.); +#190598 = EDGE_CURVE('',#190590,#190599,#190601,.T.); +#190599 = VERTEX_POINT('',#190600); +#190600 = CARTESIAN_POINT('',(126.790459,-85.204919,1.585)); +#190601 = LINE('',#190602,#190603); +#190602 = CARTESIAN_POINT('',(127.001173,-85.204919,1.585)); +#190603 = VECTOR('',#190604,1.); +#190604 = DIRECTION('',(-1.,0.,0.)); +#190605 = ORIENTED_EDGE('',*,*,#190606,.T.); +#190606 = EDGE_CURVE('',#190599,#190607,#190609,.T.); +#190607 = VERTEX_POINT('',#190608); +#190608 = CARTESIAN_POINT('',(126.789018,-86.144551,1.585)); +#190609 = LINE('',#190610,#190611); +#190610 = CARTESIAN_POINT('',(126.790459,-85.204919,1.585)); +#190611 = VECTOR('',#190612,1.); +#190612 = DIRECTION('',(-1.533577299926E-03,-0.99999882407,0.)); +#190613 = ORIENTED_EDGE('',*,*,#190614,.T.); +#190614 = EDGE_CURVE('',#190607,#190615,#190617,.T.); +#190615 = VERTEX_POINT('',#190616); +#190616 = CARTESIAN_POINT('',(126.640459,-86.129919,1.585)); +#190617 = CIRCLE('',#190618,7.500006711464E-02); +#190618 = AXIS2_PLACEMENT_3D('',#190619,#190620,#190621); +#190619 = CARTESIAN_POINT('',(126.71545906711,-86.12991906711,1.585)); +#190620 = DIRECTION('',(-0.,0.,-1.)); +#190621 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#190622 = ORIENTED_EDGE('',*,*,#190623,.T.); +#190623 = EDGE_CURVE('',#190615,#190624,#190626,.T.); +#190624 = VERTEX_POINT('',#190625); +#190625 = CARTESIAN_POINT('',(126.640459,-85.204919,1.585)); +#190626 = LINE('',#190627,#190628); +#190627 = CARTESIAN_POINT('',(126.640459,-86.129919,1.585)); +#190628 = VECTOR('',#190629,1.); +#190629 = DIRECTION('',(0.,1.,0.)); +#190630 = ORIENTED_EDGE('',*,*,#190631,.T.); +#190631 = EDGE_CURVE('',#190624,#190571,#190632,.T.); +#190632 = LINE('',#190633,#190634); +#190633 = CARTESIAN_POINT('',(126.640459,-85.204919,1.585)); +#190634 = VECTOR('',#190635,1.); +#190635 = DIRECTION('',(-0.999979555102,6.394480216655E-03,0.)); +#190636 = PLANE('',#190637); +#190637 = AXIS2_PLACEMENT_3D('',#190638,#190639,#190640); +#190638 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190639 = DIRECTION('',(0.,0.,1.)); +#190640 = DIRECTION('',(1.,0.,-0.)); +#190641 = SHELL_BASED_SURFACE_MODEL('',(#190642)); +#190642 = OPEN_SHELL('',(#190643)); +#190643 = ADVANCED_FACE('',(#190644,#190722),#190774,.T.); +#190644 = FACE_BOUND('',#190645,.F.); +#190645 = EDGE_LOOP('',(#190646,#190657,#190665,#190674,#190682,#190691, + #190699,#190707,#190716)); +#190646 = ORIENTED_EDGE('',*,*,#190647,.T.); +#190647 = EDGE_CURVE('',#190648,#190650,#190652,.T.); +#190648 = VERTEX_POINT('',#190649); +#190649 = CARTESIAN_POINT('',(127.260948,-85.115287,1.585)); +#190650 = VERTEX_POINT('',#190651); +#190651 = CARTESIAN_POINT('',(127.334507,-85.054919,1.585)); +#190652 = CIRCLE('',#190653,7.500074938986E-02); +#190653 = AXIS2_PLACEMENT_3D('',#190654,#190655,#190656); +#190654 = CARTESIAN_POINT('',(127.33450746611,-85.12991974938,1.585)); +#190655 = DIRECTION('',(0.,0.,-1.)); +#190656 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#190657 = ORIENTED_EDGE('',*,*,#190658,.T.); +#190658 = EDGE_CURVE('',#190650,#190659,#190661,.T.); +#190659 = VERTEX_POINT('',#190660); +#190660 = CARTESIAN_POINT('',(127.730091,-85.05636,1.585)); +#190661 = LINE('',#190662,#190663); +#190662 = CARTESIAN_POINT('',(127.334507,-85.054919,1.585)); +#190663 = VECTOR('',#190664,1.); +#190664 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#190665 = ORIENTED_EDGE('',*,*,#190666,.T.); +#190666 = EDGE_CURVE('',#190659,#190667,#190669,.T.); +#190667 = VERTEX_POINT('',#190668); +#190668 = CARTESIAN_POINT('',(127.979494,-85.305763,1.585)); +#190669 = CIRCLE('',#190670,0.347870264855); +#190670 = AXIS2_PLACEMENT_3D('',#190671,#190672,#190673); +#190671 = CARTESIAN_POINT('',(127.64276326502,-85.39309073497,1.585)); +#190672 = DIRECTION('',(0.,0.,-1.)); +#190673 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#190674 = ORIENTED_EDGE('',*,*,#190675,.T.); +#190675 = EDGE_CURVE('',#190667,#190676,#190678,.T.); +#190676 = VERTEX_POINT('',#190677); +#190677 = CARTESIAN_POINT('',(127.978272,-85.483062,1.585)); +#190678 = LINE('',#190679,#190680); +#190679 = CARTESIAN_POINT('',(127.979494,-85.305763,1.585)); +#190680 = VECTOR('',#190681,1.); +#190681 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#190682 = ORIENTED_EDGE('',*,*,#190683,.T.); +#190683 = EDGE_CURVE('',#190676,#190684,#190686,.T.); +#190684 = VERTEX_POINT('',#190685); +#190685 = CARTESIAN_POINT('',(127.730091,-85.727287,1.585)); +#190686 = CIRCLE('',#190687,0.348632345849); +#190687 = AXIS2_PLACEMENT_3D('',#190688,#190689,#190690); +#190688 = CARTESIAN_POINT('',(127.64232219403,-85.3898834593,1.585)); +#190689 = DIRECTION('',(0.,0.,-1.)); +#190690 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#190691 = ORIENTED_EDGE('',*,*,#190692,.T.); +#190692 = EDGE_CURVE('',#190684,#190693,#190695,.T.); +#190693 = VERTEX_POINT('',#190694); +#190694 = CARTESIAN_POINT('',(127.409507,-85.728728,1.585)); +#190695 = LINE('',#190696,#190697); +#190696 = CARTESIAN_POINT('',(127.730091,-85.727287,1.585)); +#190697 = VECTOR('',#190698,1.); +#190698 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#190699 = ORIENTED_EDGE('',*,*,#190700,.T.); +#190700 = EDGE_CURVE('',#190693,#190701,#190703,.T.); +#190701 = VERTEX_POINT('',#190702); +#190702 = CARTESIAN_POINT('',(127.408066,-86.144551,1.585)); +#190703 = LINE('',#190704,#190705); +#190704 = CARTESIAN_POINT('',(127.409507,-85.728728,1.585)); +#190705 = VECTOR('',#190706,1.); +#190706 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#190707 = ORIENTED_EDGE('',*,*,#190708,.T.); +#190708 = EDGE_CURVE('',#190701,#190709,#190711,.T.); +#190709 = VERTEX_POINT('',#190710); +#190710 = CARTESIAN_POINT('',(127.259507,-86.129919,1.585)); +#190711 = CIRCLE('',#190712,7.500006711464E-02); +#190712 = AXIS2_PLACEMENT_3D('',#190713,#190714,#190715); +#190713 = CARTESIAN_POINT('',(127.33450706711,-86.12991906711,1.585)); +#190714 = DIRECTION('',(-0.,0.,-1.)); +#190715 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#190716 = ORIENTED_EDGE('',*,*,#190717,.T.); +#190717 = EDGE_CURVE('',#190709,#190648,#190718,.T.); +#190718 = LINE('',#190719,#190720); +#190719 = CARTESIAN_POINT('',(127.259507,-86.129919,1.585)); +#190720 = VECTOR('',#190721,1.); +#190721 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#190722 = FACE_BOUND('',#190723,.F.); +#190723 = EDGE_LOOP('',(#190724,#190735,#190743,#190751,#190759,#190768) + ); +#190724 = ORIENTED_EDGE('',*,*,#190725,.T.); +#190725 = EDGE_CURVE('',#190726,#190728,#190730,.T.); +#190726 = VERTEX_POINT('',#190727); +#190727 = CARTESIAN_POINT('',(127.830935,-85.3381,1.585)); +#190728 = VERTEX_POINT('',#190729); +#190729 = CARTESIAN_POINT('',(127.697754,-85.204919,1.585)); +#190730 = CIRCLE('',#190731,0.18686440374); +#190731 = AXIS2_PLACEMENT_3D('',#190732,#190733,#190734); +#190732 = CARTESIAN_POINT('',(127.650218,-85.385636,1.585)); +#190733 = DIRECTION('',(0.,0.,1.)); +#190734 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#190735 = ORIENTED_EDGE('',*,*,#190736,.T.); +#190736 = EDGE_CURVE('',#190728,#190737,#190739,.T.); +#190737 = VERTEX_POINT('',#190738); +#190738 = CARTESIAN_POINT('',(127.409507,-85.204919,1.585)); +#190739 = LINE('',#190740,#190741); +#190740 = CARTESIAN_POINT('',(127.697754,-85.204919,1.585)); +#190741 = VECTOR('',#190742,1.); +#190742 = DIRECTION('',(-1.,0.,0.)); +#190743 = ORIENTED_EDGE('',*,*,#190744,.T.); +#190744 = EDGE_CURVE('',#190737,#190745,#190747,.T.); +#190745 = VERTEX_POINT('',#190746); +#190746 = CARTESIAN_POINT('',(127.409507,-85.578728,1.585)); +#190747 = LINE('',#190748,#190749); +#190748 = CARTESIAN_POINT('',(127.409507,-85.204919,1.585)); +#190749 = VECTOR('',#190750,1.); +#190750 = DIRECTION('',(0.,-1.,0.)); +#190751 = ORIENTED_EDGE('',*,*,#190752,.T.); +#190752 = EDGE_CURVE('',#190745,#190753,#190755,.T.); +#190753 = VERTEX_POINT('',#190754); +#190754 = CARTESIAN_POINT('',(127.697754,-85.578728,1.585)); +#190755 = LINE('',#190756,#190757); +#190756 = CARTESIAN_POINT('',(127.409507,-85.578728,1.585)); +#190757 = VECTOR('',#190758,1.); +#190758 = DIRECTION('',(1.,0.,0.)); +#190759 = ORIENTED_EDGE('',*,*,#190760,.T.); +#190760 = EDGE_CURVE('',#190753,#190761,#190763,.T.); +#190761 = VERTEX_POINT('',#190762); +#190762 = CARTESIAN_POINT('',(127.830935,-85.445547,1.585)); +#190763 = CIRCLE('',#190764,0.18686440374); +#190764 = AXIS2_PLACEMENT_3D('',#190765,#190766,#190767); +#190765 = CARTESIAN_POINT('',(127.650218,-85.398011,1.585)); +#190766 = DIRECTION('',(0.,0.,1.)); +#190767 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#190768 = ORIENTED_EDGE('',*,*,#190769,.T.); +#190769 = EDGE_CURVE('',#190761,#190726,#190770,.T.); +#190770 = LINE('',#190771,#190772); +#190771 = CARTESIAN_POINT('',(127.830935,-85.445547,1.585)); +#190772 = VECTOR('',#190773,1.); +#190773 = DIRECTION('',(0.,1.,0.)); +#190774 = PLANE('',#190775); +#190775 = AXIS2_PLACEMENT_3D('',#190776,#190777,#190778); +#190776 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190777 = DIRECTION('',(0.,0.,1.)); +#190778 = DIRECTION('',(1.,0.,-0.)); +#190779 = SHELL_BASED_SURFACE_MODEL('',(#190780)); +#190780 = OPEN_SHELL('',(#190781)); +#190781 = ADVANCED_FACE('',(#190782),#191023,.T.); +#190782 = FACE_BOUND('',#190783,.F.); +#190783 = EDGE_LOOP('',(#190784,#190795,#190803,#190811,#190819,#190827, + #190836,#190844,#190853,#190861,#190869,#190877,#190885,#190893, + #190901,#190910,#190918,#190926,#190934,#190942,#190951,#190959, + #190967,#190975,#190984,#190992,#191000,#191008,#191017)); +#190784 = ORIENTED_EDGE('',*,*,#190785,.T.); +#190785 = EDGE_CURVE('',#190786,#190788,#190790,.T.); +#190786 = VERTEX_POINT('',#190787); +#190787 = CARTESIAN_POINT('',(148.258882,-85.549999,1.585)); +#190788 = VERTEX_POINT('',#190789); +#190789 = CARTESIAN_POINT('',(148.323882,-85.484999,1.585)); +#190790 = CIRCLE('',#190791,6.500103935393E-02); +#190791 = AXIS2_PLACEMENT_3D('',#190792,#190793,#190794); +#190792 = CARTESIAN_POINT('',(148.32388303934,-85.55000003934,1.585)); +#190793 = DIRECTION('',(0.,0.,-1.)); +#190794 = DIRECTION('',(-0.999999999872,1.598967714806E-05,0.)); +#190795 = ORIENTED_EDGE('',*,*,#190796,.T.); +#190796 = EDGE_CURVE('',#190788,#190797,#190799,.T.); +#190797 = VERTEX_POINT('',#190798); +#190798 = CARTESIAN_POINT('',(148.623882,-85.484999,1.585)); +#190799 = LINE('',#190800,#190801); +#190800 = CARTESIAN_POINT('',(148.323882,-85.484999,1.585)); +#190801 = VECTOR('',#190802,1.); +#190802 = DIRECTION('',(1.,0.,0.)); +#190803 = ORIENTED_EDGE('',*,*,#190804,.T.); +#190804 = EDGE_CURVE('',#190797,#190805,#190807,.T.); +#190805 = VERTEX_POINT('',#190806); +#190806 = CARTESIAN_POINT('',(148.648756,-85.489947,1.585)); +#190807 = LINE('',#190808,#190809); +#190808 = CARTESIAN_POINT('',(148.623882,-85.484999,1.585)); +#190809 = VECTOR('',#190810,1.); +#190810 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#190811 = ORIENTED_EDGE('',*,*,#190812,.T.); +#190812 = EDGE_CURVE('',#190805,#190813,#190815,.T.); +#190813 = VERTEX_POINT('',#190814); +#190814 = CARTESIAN_POINT('',(148.669843,-85.504037,1.585)); +#190815 = LINE('',#190816,#190817); +#190816 = CARTESIAN_POINT('',(148.648756,-85.489947,1.585)); +#190817 = VECTOR('',#190818,1.); +#190818 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#190819 = ORIENTED_EDGE('',*,*,#190820,.T.); +#190820 = EDGE_CURVE('',#190813,#190821,#190823,.T.); +#190821 = VERTEX_POINT('',#190822); +#190822 = CARTESIAN_POINT('',(148.721003,-85.559318,1.585)); +#190823 = LINE('',#190824,#190825); +#190824 = CARTESIAN_POINT('',(148.669843,-85.504037,1.585)); +#190825 = VECTOR('',#190826,1.); +#190826 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#190827 = ORIENTED_EDGE('',*,*,#190828,.T.); +#190828 = EDGE_CURVE('',#190821,#190829,#190831,.T.); +#190829 = VERTEX_POINT('',#190830); +#190830 = CARTESIAN_POINT('',(148.720999,-85.969256,1.585)); +#190831 = CIRCLE('',#190832,0.409312568567); +#190832 = AXIS2_PLACEMENT_3D('',#190833,#190834,#190835); +#190833 = CARTESIAN_POINT('',(148.36670664806,-85.76428354294,1.585)); +#190834 = DIRECTION('',(0.,0.,-1.)); +#190835 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#190836 = ORIENTED_EDGE('',*,*,#190837,.T.); +#190837 = EDGE_CURVE('',#190829,#190838,#190840,.T.); +#190838 = VERTEX_POINT('',#190839); +#190839 = CARTESIAN_POINT('',(148.618322,-86.073179,1.585)); +#190840 = LINE('',#190841,#190842); +#190841 = CARTESIAN_POINT('',(148.720999,-85.969256,1.585)); +#190842 = VECTOR('',#190843,1.); +#190843 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#190844 = ORIENTED_EDGE('',*,*,#190845,.T.); +#190845 = EDGE_CURVE('',#190838,#190846,#190848,.T.); +#190846 = VERTEX_POINT('',#190847); +#190847 = CARTESIAN_POINT('',(148.179546,-86.170201,1.585)); +#190848 = CIRCLE('',#190849,0.675422176574); +#190849 = AXIS2_PLACEMENT_3D('',#190850,#190851,#190852); +#190850 = CARTESIAN_POINT('',(148.26141275007,-85.49975864465,1.585)); +#190851 = DIRECTION('',(0.,0.,-1.)); +#190852 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#190853 = ORIENTED_EDGE('',*,*,#190854,.T.); +#190854 = EDGE_CURVE('',#190846,#190855,#190857,.T.); +#190855 = VERTEX_POINT('',#190856); +#190856 = CARTESIAN_POINT('',(147.994813,-86.122423,1.585)); +#190857 = LINE('',#190858,#190859); +#190858 = CARTESIAN_POINT('',(148.179546,-86.170201,1.585)); +#190859 = VECTOR('',#190860,1.); +#190860 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#190861 = ORIENTED_EDGE('',*,*,#190862,.T.); +#190862 = EDGE_CURVE('',#190855,#190863,#190865,.T.); +#190863 = VERTEX_POINT('',#190864); +#190864 = CARTESIAN_POINT('',(147.892206,-86.06739,1.585)); +#190865 = LINE('',#190866,#190867); +#190866 = CARTESIAN_POINT('',(147.994813,-86.122423,1.585)); +#190867 = VECTOR('',#190868,1.); +#190868 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#190869 = ORIENTED_EDGE('',*,*,#190870,.T.); +#190870 = EDGE_CURVE('',#190863,#190871,#190873,.T.); +#190871 = VERTEX_POINT('',#190872); +#190872 = CARTESIAN_POINT('',(147.798191,-85.969252,1.585)); +#190873 = LINE('',#190874,#190875); +#190874 = CARTESIAN_POINT('',(147.892206,-86.06739,1.585)); +#190875 = VECTOR('',#190876,1.); +#190876 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#190877 = ORIENTED_EDGE('',*,*,#190878,.T.); +#190878 = EDGE_CURVE('',#190871,#190879,#190881,.T.); +#190879 = VERTEX_POINT('',#190880); +#190880 = CARTESIAN_POINT('',(147.74663,-85.817364,1.585)); +#190881 = LINE('',#190882,#190883); +#190882 = CARTESIAN_POINT('',(147.798191,-85.969252,1.585)); +#190883 = VECTOR('',#190884,1.); +#190884 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#190885 = ORIENTED_EDGE('',*,*,#190886,.T.); +#190886 = EDGE_CURVE('',#190879,#190887,#190889,.T.); +#190887 = VERTEX_POINT('',#190888); +#190888 = CARTESIAN_POINT('',(147.747512,-85.663914,1.585)); +#190889 = LINE('',#190890,#190891); +#190890 = CARTESIAN_POINT('',(147.74663,-85.817364,1.585)); +#190891 = VECTOR('',#190892,1.); +#190892 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#190893 = ORIENTED_EDGE('',*,*,#190894,.T.); +#190894 = EDGE_CURVE('',#190887,#190895,#190897,.T.); +#190895 = VERTEX_POINT('',#190896); +#190896 = CARTESIAN_POINT('',(147.794316,-85.563787,1.585)); +#190897 = LINE('',#190898,#190899); +#190898 = CARTESIAN_POINT('',(147.747512,-85.663914,1.585)); +#190899 = VECTOR('',#190900,1.); +#190900 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#190901 = ORIENTED_EDGE('',*,*,#190902,.T.); +#190902 = EDGE_CURVE('',#190895,#190903,#190905,.T.); +#190903 = VERTEX_POINT('',#190904); +#190904 = CARTESIAN_POINT('',(147.910592,-85.621925,1.585)); +#190905 = CIRCLE('',#190906,6.500026004258E-02); +#190906 = AXIS2_PLACEMENT_3D('',#190907,#190908,#190909); +#190907 = CARTESIAN_POINT('',(147.85245365279,-85.5928566944,1.585)); +#190908 = DIRECTION('',(0.,0.,-1.)); +#190909 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#190910 = ORIENTED_EDGE('',*,*,#190911,.T.); +#190911 = EDGE_CURVE('',#190903,#190912,#190914,.T.); +#190912 = VERTEX_POINT('',#190913); +#190913 = CARTESIAN_POINT('',(147.874597,-85.693915,1.585)); +#190914 = LINE('',#190915,#190916); +#190915 = CARTESIAN_POINT('',(147.910592,-85.621925,1.585)); +#190916 = VECTOR('',#190917,1.); +#190917 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#190918 = ORIENTED_EDGE('',*,*,#190919,.T.); +#190919 = EDGE_CURVE('',#190912,#190920,#190922,.T.); +#190920 = VERTEX_POINT('',#190921); +#190921 = CARTESIAN_POINT('',(147.874597,-85.796595,1.585)); +#190922 = LINE('',#190923,#190924); +#190923 = CARTESIAN_POINT('',(147.874597,-85.693915,1.585)); +#190924 = VECTOR('',#190925,1.); +#190925 = DIRECTION('',(0.,-1.,0.)); +#190926 = ORIENTED_EDGE('',*,*,#190927,.T.); +#190927 = EDGE_CURVE('',#190920,#190928,#190930,.T.); +#190928 = VERTEX_POINT('',#190929); +#190929 = CARTESIAN_POINT('',(147.909265,-85.9006,1.585)); +#190930 = LINE('',#190931,#190932); +#190931 = CARTESIAN_POINT('',(147.874597,-85.796595,1.585)); +#190932 = VECTOR('',#190933,1.); +#190933 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#190934 = ORIENTED_EDGE('',*,*,#190935,.T.); +#190935 = EDGE_CURVE('',#190928,#190936,#190938,.T.); +#190936 = VERTEX_POINT('',#190937); +#190937 = CARTESIAN_POINT('',(147.976669,-85.968006,1.585)); +#190938 = LINE('',#190939,#190940); +#190939 = CARTESIAN_POINT('',(147.909265,-85.9006,1.585)); +#190940 = VECTOR('',#190941,1.); +#190941 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#190942 = ORIENTED_EDGE('',*,*,#190943,.T.); +#190943 = EDGE_CURVE('',#190936,#190944,#190946,.T.); +#190944 = VERTEX_POINT('',#190945); +#190945 = CARTESIAN_POINT('',(148.315881,-86.042142,1.585)); +#190946 = CIRCLE('',#190947,0.553317785495); +#190947 = AXIS2_PLACEMENT_3D('',#190948,#190949,#190950); +#190948 = CARTESIAN_POINT('',(148.2584500839,-85.49181276979,1.585)); +#190949 = DIRECTION('',(0.,0.,1.)); +#190950 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#190951 = ORIENTED_EDGE('',*,*,#190952,.T.); +#190952 = EDGE_CURVE('',#190944,#190953,#190955,.T.); +#190953 = VERTEX_POINT('',#190954); +#190954 = CARTESIAN_POINT('',(148.472622,-86.002956,1.585)); +#190955 = LINE('',#190956,#190957); +#190956 = CARTESIAN_POINT('',(148.315881,-86.042142,1.585)); +#190957 = VECTOR('',#190958,1.); +#190958 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#190959 = ORIENTED_EDGE('',*,*,#190960,.T.); +#190960 = EDGE_CURVE('',#190953,#190961,#190963,.T.); +#190961 = VERTEX_POINT('',#190962); +#190962 = CARTESIAN_POINT('',(148.542522,-85.968007,1.585)); +#190963 = LINE('',#190964,#190965); +#190964 = CARTESIAN_POINT('',(148.472622,-86.002956,1.585)); +#190965 = VECTOR('',#190966,1.); +#190966 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#190967 = ORIENTED_EDGE('',*,*,#190968,.T.); +#190968 = EDGE_CURVE('',#190961,#190969,#190971,.T.); +#190969 = VERTEX_POINT('',#190970); +#190970 = CARTESIAN_POINT('',(148.609928,-85.9006,1.585)); +#190971 = LINE('',#190972,#190973); +#190972 = CARTESIAN_POINT('',(148.542522,-85.968007,1.585)); +#190973 = VECTOR('',#190974,1.); +#190974 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#190975 = ORIENTED_EDGE('',*,*,#190976,.T.); +#190976 = EDGE_CURVE('',#190969,#190977,#190979,.T.); +#190977 = VERTEX_POINT('',#190978); +#190978 = CARTESIAN_POINT('',(148.609928,-85.627968,1.585)); +#190979 = CIRCLE('',#190980,0.272194686174); +#190980 = AXIS2_PLACEMENT_3D('',#190981,#190982,#190983); +#190981 = CARTESIAN_POINT('',(148.37432686391,-85.764284,1.585)); +#190982 = DIRECTION('',(0.,-0.,1.)); +#190983 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#190984 = ORIENTED_EDGE('',*,*,#190985,.T.); +#190985 = EDGE_CURVE('',#190977,#190986,#190988,.T.); +#190986 = VERTEX_POINT('',#190987); +#190987 = CARTESIAN_POINT('',(148.596959,-85.614999,1.585)); +#190988 = LINE('',#190989,#190990); +#190989 = CARTESIAN_POINT('',(148.609928,-85.627968,1.585)); +#190990 = VECTOR('',#190991,1.); +#190991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#190992 = ORIENTED_EDGE('',*,*,#190993,.T.); +#190993 = EDGE_CURVE('',#190986,#190994,#190996,.T.); +#190994 = VERTEX_POINT('',#190995); +#190995 = CARTESIAN_POINT('',(148.388882,-85.614999,1.585)); +#190996 = LINE('',#190997,#190998); +#190997 = CARTESIAN_POINT('',(148.596959,-85.614999,1.585)); +#190998 = VECTOR('',#190999,1.); +#190999 = DIRECTION('',(-1.,0.,0.)); +#191000 = ORIENTED_EDGE('',*,*,#191001,.T.); +#191001 = EDGE_CURVE('',#190994,#191002,#191004,.T.); +#191002 = VERTEX_POINT('',#191003); +#191003 = CARTESIAN_POINT('',(148.388882,-85.721428,1.585)); +#191004 = LINE('',#191005,#191006); +#191005 = CARTESIAN_POINT('',(148.388882,-85.614999,1.585)); +#191006 = VECTOR('',#191007,1.); +#191007 = DIRECTION('',(0.,-1.,0.)); +#191008 = ORIENTED_EDGE('',*,*,#191009,.T.); +#191009 = EDGE_CURVE('',#191002,#191010,#191012,.T.); +#191010 = VERTEX_POINT('',#191011); +#191011 = CARTESIAN_POINT('',(148.258882,-85.721428,1.585)); +#191012 = CIRCLE('',#191013,6.500000000092E-02); +#191013 = AXIS2_PLACEMENT_3D('',#191014,#191015,#191016); +#191014 = CARTESIAN_POINT('',(148.323882,-85.72142765513,1.585)); +#191015 = DIRECTION('',(-0.,0.,-1.)); +#191016 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#191017 = ORIENTED_EDGE('',*,*,#191018,.T.); +#191018 = EDGE_CURVE('',#191010,#190786,#191019,.T.); +#191019 = LINE('',#191020,#191021); +#191020 = CARTESIAN_POINT('',(148.258882,-85.721428,1.585)); +#191021 = VECTOR('',#191022,1.); +#191022 = DIRECTION('',(0.,1.,0.)); +#191023 = PLANE('',#191024); +#191024 = AXIS2_PLACEMENT_3D('',#191025,#191026,#191027); +#191025 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191026 = DIRECTION('',(0.,0.,1.)); +#191027 = DIRECTION('',(1.,0.,-0.)); +#191028 = SHELL_BASED_SURFACE_MODEL('',(#191029)); +#191029 = OPEN_SHELL('',(#191030)); +#191030 = ADVANCED_FACE('',(#191031,#191204),#191256,.T.); +#191031 = FACE_BOUND('',#191032,.F.); +#191032 = EDGE_LOOP('',(#191033,#191044,#191052,#191061,#191069,#191077, + #191085,#191093,#191101,#191109,#191117,#191125,#191133,#191141, + #191149,#191157,#191165,#191173,#191182,#191190,#191198)); +#191033 = ORIENTED_EDGE('',*,*,#191034,.T.); +#191034 = EDGE_CURVE('',#191035,#191037,#191039,.T.); +#191035 = VERTEX_POINT('',#191036); +#191036 = CARTESIAN_POINT('',(82.683526,-84.62569,1.585)); +#191037 = VERTEX_POINT('',#191038); +#191038 = CARTESIAN_POINT('',(82.683526,-84.331454,1.585)); +#191039 = CIRCLE('',#191040,0.150000292066); +#191040 = AXIS2_PLACEMENT_3D('',#191041,#191042,#191043); +#191041 = CARTESIAN_POINT('',(82.71279,-84.478572,1.585)); +#191042 = DIRECTION('',(0.,0.,-1.)); +#191043 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#191044 = ORIENTED_EDGE('',*,*,#191045,.T.); +#191045 = EDGE_CURVE('',#191037,#191046,#191048,.T.); +#191046 = VERTEX_POINT('',#191047); +#191047 = CARTESIAN_POINT('',(85.342054,-84.331454,1.585)); +#191048 = LINE('',#191049,#191050); +#191049 = CARTESIAN_POINT('',(82.683526,-84.331454,1.585)); +#191050 = VECTOR('',#191051,1.); +#191051 = DIRECTION('',(1.,0.,0.)); +#191052 = ORIENTED_EDGE('',*,*,#191053,.T.); +#191053 = EDGE_CURVE('',#191046,#191054,#191056,.T.); +#191054 = VERTEX_POINT('',#191055); +#191055 = CARTESIAN_POINT('',(85.459908,-84.449308,1.585)); +#191056 = CIRCLE('',#191057,0.150002525551); +#191057 = AXIS2_PLACEMENT_3D('',#191058,#191059,#191060); +#191058 = CARTESIAN_POINT('',(85.312788100587,-84.47857389941,1.585)); +#191059 = DIRECTION('',(0.,0.,-1.)); +#191060 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#191061 = ORIENTED_EDGE('',*,*,#191062,.T.); +#191062 = EDGE_CURVE('',#191054,#191063,#191065,.T.); +#191063 = VERTEX_POINT('',#191064); +#191064 = CARTESIAN_POINT('',(85.459908,-85.498312,1.585)); +#191065 = LINE('',#191066,#191067); +#191066 = CARTESIAN_POINT('',(85.459908,-84.449308,1.585)); +#191067 = VECTOR('',#191068,1.); +#191068 = DIRECTION('',(0.,-1.,0.)); +#191069 = ORIENTED_EDGE('',*,*,#191070,.T.); +#191070 = EDGE_CURVE('',#191063,#191071,#191073,.T.); +#191071 = VERTEX_POINT('',#191072); +#191072 = CARTESIAN_POINT('',(85.446954,-85.53613,1.585)); +#191073 = LINE('',#191074,#191075); +#191074 = CARTESIAN_POINT('',(85.459908,-85.498312,1.585)); +#191075 = VECTOR('',#191076,1.); +#191076 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#191077 = ORIENTED_EDGE('',*,*,#191078,.T.); +#191078 = EDGE_CURVE('',#191071,#191079,#191081,.T.); +#191079 = VERTEX_POINT('',#191080); +#191080 = CARTESIAN_POINT('',(85.307479,-85.808635,1.585)); +#191081 = LINE('',#191082,#191083); +#191082 = CARTESIAN_POINT('',(85.446954,-85.53613,1.585)); +#191083 = VECTOR('',#191084,1.); +#191084 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#191085 = ORIENTED_EDGE('',*,*,#191086,.T.); +#191086 = EDGE_CURVE('',#191079,#191087,#191089,.T.); +#191087 = VERTEX_POINT('',#191088); +#191088 = CARTESIAN_POINT('',(85.148507,-85.965198,1.585)); +#191089 = LINE('',#191090,#191091); +#191090 = CARTESIAN_POINT('',(85.307479,-85.808635,1.585)); +#191091 = VECTOR('',#191092,1.); +#191092 = DIRECTION('',(-0.712484531253,-0.701687817141,0.)); +#191093 = ORIENTED_EDGE('',*,*,#191094,.T.); +#191094 = EDGE_CURVE('',#191087,#191095,#191097,.T.); +#191095 = VERTEX_POINT('',#191096); +#191096 = CARTESIAN_POINT('',(84.85717,-86.10896,1.585)); +#191097 = LINE('',#191098,#191099); +#191098 = CARTESIAN_POINT('',(85.148507,-85.965198,1.585)); +#191099 = VECTOR('',#191100,1.); +#191100 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#191101 = ORIENTED_EDGE('',*,*,#191102,.T.); +#191102 = EDGE_CURVE('',#191095,#191103,#191105,.T.); +#191103 = VERTEX_POINT('',#191104); +#191104 = CARTESIAN_POINT('',(84.817552,-86.114286,1.585)); +#191105 = LINE('',#191106,#191107); +#191106 = CARTESIAN_POINT('',(84.85717,-86.10896,1.585)); +#191107 = VECTOR('',#191108,1.); +#191108 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#191109 = ORIENTED_EDGE('',*,*,#191110,.T.); +#191110 = EDGE_CURVE('',#191103,#191111,#191113,.T.); +#191111 = VERTEX_POINT('',#191112); +#191112 = CARTESIAN_POINT('',(84.416859,-86.111404,1.585)); +#191113 = LINE('',#191114,#191115); +#191114 = CARTESIAN_POINT('',(84.817552,-86.114286,1.585)); +#191115 = VECTOR('',#191116,1.); +#191116 = DIRECTION('',(-0.999974134695,7.192352889135E-03,0.)); +#191117 = ORIENTED_EDGE('',*,*,#191118,.T.); +#191118 = EDGE_CURVE('',#191111,#191119,#191121,.T.); +#191119 = VERTEX_POINT('',#191120); +#191120 = CARTESIAN_POINT('',(84.379041,-86.09845,1.585)); +#191121 = LINE('',#191122,#191123); +#191122 = CARTESIAN_POINT('',(84.416859,-86.111404,1.585)); +#191123 = VECTOR('',#191124,1.); +#191124 = DIRECTION('',(-0.946039317712,0.324051862119,0.)); +#191125 = ORIENTED_EDGE('',*,*,#191126,.T.); +#191126 = EDGE_CURVE('',#191119,#191127,#191129,.T.); +#191127 = VERTEX_POINT('',#191128); +#191128 = CARTESIAN_POINT('',(84.106537,-85.958976,1.585)); +#191129 = LINE('',#191130,#191131); +#191130 = CARTESIAN_POINT('',(84.379041,-86.09845,1.585)); +#191131 = VECTOR('',#191132,1.); +#191132 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#191133 = ORIENTED_EDGE('',*,*,#191134,.T.); +#191134 = EDGE_CURVE('',#191127,#191135,#191137,.T.); +#191135 = VERTEX_POINT('',#191136); +#191136 = CARTESIAN_POINT('',(83.949974,-85.800002,1.585)); +#191137 = LINE('',#191138,#191139); +#191138 = CARTESIAN_POINT('',(84.106537,-85.958976,1.585)); +#191139 = VECTOR('',#191140,1.); +#191140 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#191141 = ORIENTED_EDGE('',*,*,#191142,.T.); +#191142 = EDGE_CURVE('',#191135,#191143,#191145,.T.); +#191143 = VERTEX_POINT('',#191144); +#191144 = CARTESIAN_POINT('',(83.806211,-85.508667,1.585)); +#191145 = LINE('',#191146,#191147); +#191146 = CARTESIAN_POINT('',(83.949974,-85.800002,1.585)); +#191147 = VECTOR('',#191148,1.); +#191148 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#191149 = ORIENTED_EDGE('',*,*,#191150,.T.); +#191150 = EDGE_CURVE('',#191143,#191151,#191153,.T.); +#191151 = VERTEX_POINT('',#191152); +#191152 = CARTESIAN_POINT('',(83.800885,-85.469048,1.585)); +#191153 = LINE('',#191154,#191155); +#191154 = CARTESIAN_POINT('',(83.806211,-85.508667,1.585)); +#191155 = VECTOR('',#191156,1.); +#191156 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#191157 = ORIENTED_EDGE('',*,*,#191158,.T.); +#191158 = EDGE_CURVE('',#191151,#191159,#191161,.T.); +#191159 = VERTEX_POINT('',#191160); +#191160 = CARTESIAN_POINT('',(83.800885,-85.385718,1.585)); +#191161 = LINE('',#191162,#191163); +#191162 = CARTESIAN_POINT('',(83.800885,-85.469048,1.585)); +#191163 = VECTOR('',#191164,1.); +#191164 = DIRECTION('',(0.,1.,0.)); +#191165 = ORIENTED_EDGE('',*,*,#191166,.T.); +#191166 = EDGE_CURVE('',#191159,#191167,#191169,.T.); +#191167 = VERTEX_POINT('',#191168); +#191168 = CARTESIAN_POINT('',(82.773183,-86.101592,1.585)); +#191169 = LINE('',#191170,#191171); +#191170 = CARTESIAN_POINT('',(83.800885,-85.385718,1.585)); +#191171 = VECTOR('',#191172,1.); +#191172 = DIRECTION('',(-0.820549135382,-0.571575993569,0.)); +#191173 = ORIENTED_EDGE('',*,*,#191174,.T.); +#191174 = EDGE_CURVE('',#191167,#191175,#191177,.T.); +#191175 = VERTEX_POINT('',#191176); +#191176 = CARTESIAN_POINT('',(82.604449,-85.860544,1.585)); +#191177 = CIRCLE('',#191178,0.150000749872); +#191178 = AXIS2_PLACEMENT_3D('',#191179,#191180,#191181); +#191179 = CARTESIAN_POINT('',(82.712790236198,-85.96428599487,1.585)); +#191180 = DIRECTION('',(0.,0.,-1.)); +#191181 = DIRECTION('',(0.402616412608,-0.915368791416,0.)); +#191182 = ORIENTED_EDGE('',*,*,#191183,.T.); +#191183 = EDGE_CURVE('',#191175,#191184,#191186,.T.); +#191184 = VERTEX_POINT('',#191185); +#191185 = CARTESIAN_POINT('',(83.800885,-85.019521,1.585)); +#191186 = LINE('',#191187,#191188); +#191187 = CARTESIAN_POINT('',(82.604449,-85.860544,1.585)); +#191188 = VECTOR('',#191189,1.); +#191189 = DIRECTION('',(0.818100273852,0.575075596702,0.)); +#191190 = ORIENTED_EDGE('',*,*,#191191,.T.); +#191191 = EDGE_CURVE('',#191184,#191192,#191194,.T.); +#191192 = VERTEX_POINT('',#191193); +#191193 = CARTESIAN_POINT('',(83.800885,-84.628572,1.585)); +#191194 = LINE('',#191195,#191196); +#191195 = CARTESIAN_POINT('',(83.800885,-85.019521,1.585)); +#191196 = VECTOR('',#191197,1.); +#191197 = DIRECTION('',(0.,1.,0.)); +#191198 = ORIENTED_EDGE('',*,*,#191199,.T.); +#191199 = EDGE_CURVE('',#191192,#191035,#191200,.T.); +#191200 = LINE('',#191201,#191202); +#191201 = CARTESIAN_POINT('',(83.800885,-84.628572,1.585)); +#191202 = VECTOR('',#191203,1.); +#191203 = DIRECTION('',(-0.999996673632,2.579287778956E-03,0.)); +#191204 = FACE_BOUND('',#191205,.F.); +#191205 = EDGE_LOOP('',(#191206,#191217,#191225,#191233,#191241,#191250) + ); +#191206 = ORIENTED_EDGE('',*,*,#191207,.T.); +#191207 = EDGE_CURVE('',#191208,#191210,#191212,.T.); +#191208 = VERTEX_POINT('',#191209); +#191209 = CARTESIAN_POINT('',(84.782142,-85.814286,1.585)); +#191210 = VERTEX_POINT('',#191211); +#191211 = CARTESIAN_POINT('',(85.16279,-85.433637,1.585)); +#191212 = CIRCLE('',#191213,0.536607521284); +#191213 = AXIS2_PLACEMENT_3D('',#191214,#191215,#191216); +#191214 = CARTESIAN_POINT('',(84.644211862354,-85.2957082247,1.585)); +#191215 = DIRECTION('',(0.,0.,1.)); +#191216 = DIRECTION('',(0.257041007022,-0.966400497056,0.)); +#191217 = ORIENTED_EDGE('',*,*,#191218,.T.); +#191218 = EDGE_CURVE('',#191210,#191219,#191221,.T.); +#191219 = VERTEX_POINT('',#191220); +#191220 = CARTESIAN_POINT('',(85.16279,-84.628572,1.585)); +#191221 = LINE('',#191222,#191223); +#191222 = CARTESIAN_POINT('',(85.16279,-85.433637,1.585)); +#191223 = VECTOR('',#191224,1.); +#191224 = DIRECTION('',(0.,1.,0.)); +#191225 = ORIENTED_EDGE('',*,*,#191226,.T.); +#191226 = EDGE_CURVE('',#191219,#191227,#191229,.T.); +#191227 = VERTEX_POINT('',#191228); +#191228 = CARTESIAN_POINT('',(84.100885,-84.628572,1.585)); +#191229 = LINE('',#191230,#191231); +#191230 = CARTESIAN_POINT('',(85.16279,-84.628572,1.585)); +#191231 = VECTOR('',#191232,1.); +#191232 = DIRECTION('',(-1.,0.,0.)); +#191233 = ORIENTED_EDGE('',*,*,#191234,.T.); +#191234 = EDGE_CURVE('',#191227,#191235,#191237,.T.); +#191235 = VERTEX_POINT('',#191236); +#191236 = CARTESIAN_POINT('',(84.100885,-85.433637,1.585)); +#191237 = LINE('',#191238,#191239); +#191238 = CARTESIAN_POINT('',(84.100885,-84.628572,1.585)); +#191239 = VECTOR('',#191240,1.); +#191240 = DIRECTION('',(0.,-1.,0.)); +#191241 = ORIENTED_EDGE('',*,*,#191242,.T.); +#191242 = EDGE_CURVE('',#191235,#191243,#191245,.T.); +#191243 = VERTEX_POINT('',#191244); +#191244 = CARTESIAN_POINT('',(84.481533,-85.814286,1.585)); +#191245 = CIRCLE('',#191246,0.536608239522); +#191246 = AXIS2_PLACEMENT_3D('',#191247,#191248,#191249); +#191247 = CARTESIAN_POINT('',(84.619463724711,-85.29570763764,1.585)); +#191248 = DIRECTION('',(0.,0.,1.)); +#191249 = DIRECTION('',(-0.966400972846,-0.25703921818,0.)); +#191250 = ORIENTED_EDGE('',*,*,#191251,.T.); +#191251 = EDGE_CURVE('',#191243,#191208,#191252,.T.); +#191252 = LINE('',#191253,#191254); +#191253 = CARTESIAN_POINT('',(84.481533,-85.814286,1.585)); +#191254 = VECTOR('',#191255,1.); +#191255 = DIRECTION('',(1.,0.,0.)); +#191256 = PLANE('',#191257); +#191257 = AXIS2_PLACEMENT_3D('',#191258,#191259,#191260); +#191258 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191259 = DIRECTION('',(0.,0.,1.)); +#191260 = DIRECTION('',(1.,0.,-0.)); +#191261 = SHELL_BASED_SURFACE_MODEL('',(#191262)); +#191262 = OPEN_SHELL('',(#191263)); +#191263 = ADVANCED_FACE('',(#191264,#191429),#191496,.T.); +#191264 = FACE_BOUND('',#191265,.F.); +#191265 = EDGE_LOOP('',(#191266,#191276,#191284,#191292,#191300,#191308, + #191316,#191324,#191332,#191340,#191349,#191357,#191365,#191373, + #191382,#191390,#191399,#191407,#191415,#191423)); +#191266 = ORIENTED_EDGE('',*,*,#191267,.T.); +#191267 = EDGE_CURVE('',#191268,#191270,#191272,.T.); +#191268 = VERTEX_POINT('',#191269); +#191269 = CARTESIAN_POINT('',(185.164351,-85.028145,1.585)); +#191270 = VERTEX_POINT('',#191271); +#191271 = CARTESIAN_POINT('',(185.346108,-84.938435,1.585)); +#191272 = LINE('',#191273,#191274); +#191273 = CARTESIAN_POINT('',(185.164351,-85.028145,1.585)); +#191274 = VECTOR('',#191275,1.); +#191275 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#191276 = ORIENTED_EDGE('',*,*,#191277,.T.); +#191277 = EDGE_CURVE('',#191270,#191278,#191280,.T.); +#191278 = VERTEX_POINT('',#191279); +#191279 = CARTESIAN_POINT('',(185.375162,-84.934528,1.585)); +#191280 = LINE('',#191281,#191282); +#191281 = CARTESIAN_POINT('',(185.346108,-84.938435,1.585)); +#191282 = VECTOR('',#191283,1.); +#191283 = DIRECTION('',(0.991079213316,0.133274127019,0.)); +#191284 = ORIENTED_EDGE('',*,*,#191285,.T.); +#191285 = EDGE_CURVE('',#191278,#191286,#191288,.T.); +#191286 = VERTEX_POINT('',#191287); +#191287 = CARTESIAN_POINT('',(185.625193,-84.936642,1.585)); +#191288 = LINE('',#191289,#191290); +#191289 = CARTESIAN_POINT('',(185.375162,-84.934528,1.585)); +#191290 = VECTOR('',#191291,1.); +#191291 = DIRECTION('',(0.999964258813,-8.454649396022E-03,0.)); +#191292 = ORIENTED_EDGE('',*,*,#191293,.T.); +#191293 = EDGE_CURVE('',#191286,#191294,#191296,.T.); +#191294 = VERTEX_POINT('',#191295); +#191295 = CARTESIAN_POINT('',(185.652927,-84.946141,1.585)); +#191296 = LINE('',#191297,#191298); +#191297 = CARTESIAN_POINT('',(185.625193,-84.936642,1.585)); +#191298 = VECTOR('',#191299,1.); +#191299 = DIRECTION('',(0.946048457417,-0.324025178373,0.)); +#191300 = ORIENTED_EDGE('',*,*,#191301,.T.); +#191301 = EDGE_CURVE('',#191294,#191302,#191304,.T.); +#191302 = VERTEX_POINT('',#191303); +#191303 = CARTESIAN_POINT('',(185.825457,-85.036012,1.585)); +#191304 = LINE('',#191305,#191306); +#191305 = CARTESIAN_POINT('',(185.652927,-84.946141,1.585)); +#191306 = VECTOR('',#191307,1.); +#191307 = DIRECTION('',(0.886889600195,-0.461981425023,0.)); +#191308 = ORIENTED_EDGE('',*,*,#191309,.T.); +#191309 = EDGE_CURVE('',#191302,#191310,#191312,.T.); +#191310 = VERTEX_POINT('',#191311); +#191311 = CARTESIAN_POINT('',(185.924877,-85.13848,1.585)); +#191312 = LINE('',#191313,#191314); +#191313 = CARTESIAN_POINT('',(185.825457,-85.036012,1.585)); +#191314 = VECTOR('',#191315,1.); +#191315 = DIRECTION('',(0.696351894269,-0.717700522048,0.)); +#191316 = ORIENTED_EDGE('',*,*,#191317,.T.); +#191317 = EDGE_CURVE('',#191310,#191318,#191320,.T.); +#191318 = VERTEX_POINT('',#191319); +#191319 = CARTESIAN_POINT('',(186.014588,-85.320237,1.585)); +#191320 = LINE('',#191321,#191322); +#191321 = CARTESIAN_POINT('',(185.924877,-85.13848,1.585)); +#191322 = VECTOR('',#191323,1.); +#191323 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#191324 = ORIENTED_EDGE('',*,*,#191325,.T.); +#191325 = EDGE_CURVE('',#191318,#191326,#191328,.T.); +#191326 = VERTEX_POINT('',#191327); +#191327 = CARTESIAN_POINT('',(186.018495,-85.366589,1.585)); +#191328 = LINE('',#191329,#191330); +#191329 = CARTESIAN_POINT('',(186.014588,-85.320237,1.585)); +#191330 = VECTOR('',#191331,1.); +#191331 = DIRECTION('',(8.39919390277E-02,-0.996466434045,0.)); +#191332 = ORIENTED_EDGE('',*,*,#191333,.T.); +#191333 = EDGE_CURVE('',#191326,#191334,#191336,.T.); +#191334 = VERTEX_POINT('',#191335); +#191335 = CARTESIAN_POINT('',(186.626112,-84.943838,1.585)); +#191336 = LINE('',#191337,#191338); +#191337 = CARTESIAN_POINT('',(186.018495,-85.366589,1.585)); +#191338 = VECTOR('',#191339,1.); +#191339 = DIRECTION('',(0.820866622673,0.571119941677,0.)); +#191340 = ORIENTED_EDGE('',*,*,#191341,.T.); +#191341 = EDGE_CURVE('',#191334,#191342,#191344,.T.); +#191342 = VERTEX_POINT('',#191343); +#191343 = CARTESIAN_POINT('',(186.749849,-85.120605,1.585)); +#191344 = CIRCLE('',#191345,0.109999480258); +#191345 = AXIS2_PLACEMENT_3D('',#191346,#191347,#191348); +#191346 = CARTESIAN_POINT('',(186.67039979352,-85.04452800447,1.585)); +#191347 = DIRECTION('',(0.,0.,-1.)); +#191348 = DIRECTION('',(-0.402618207135,0.915368002108,0.)); +#191349 = ORIENTED_EDGE('',*,*,#191350,.T.); +#191350 = EDGE_CURVE('',#191342,#191351,#191353,.T.); +#191351 = VERTEX_POINT('',#191352); +#191352 = CARTESIAN_POINT('',(186.018495,-85.635133,1.585)); +#191353 = LINE('',#191354,#191355); +#191354 = CARTESIAN_POINT('',(186.749849,-85.120605,1.585)); +#191355 = VECTOR('',#191356,1.); +#191356 = DIRECTION('',(-0.817874055485,-0.575397279594,0.)); +#191357 = ORIENTED_EDGE('',*,*,#191358,.T.); +#191358 = EDGE_CURVE('',#191351,#191359,#191361,.T.); +#191359 = VERTEX_POINT('',#191360); +#191360 = CARTESIAN_POINT('',(186.018495,-85.848814,1.585)); +#191361 = LINE('',#191362,#191363); +#191362 = CARTESIAN_POINT('',(186.018495,-85.635133,1.585)); +#191363 = VECTOR('',#191364,1.); +#191364 = DIRECTION('',(0.,-1.,0.)); +#191365 = ORIENTED_EDGE('',*,*,#191366,.T.); +#191366 = EDGE_CURVE('',#191359,#191367,#191369,.T.); +#191367 = VERTEX_POINT('',#191368); +#191368 = CARTESIAN_POINT('',(186.69186,-85.850928,1.585)); +#191369 = LINE('',#191370,#191371); +#191370 = CARTESIAN_POINT('',(186.018495,-85.848814,1.585)); +#191371 = VECTOR('',#191372,1.); +#191372 = DIRECTION('',(0.999995071943,-3.139440841268E-03,0.)); +#191373 = ORIENTED_EDGE('',*,*,#191374,.T.); +#191374 = EDGE_CURVE('',#191367,#191375,#191377,.T.); +#191375 = VERTEX_POINT('',#191376); +#191376 = CARTESIAN_POINT('',(186.69186,-86.0667,1.585)); +#191377 = CIRCLE('',#191378,0.109999639072); +#191378 = AXIS2_PLACEMENT_3D('',#191379,#191380,#191381); +#191379 = CARTESIAN_POINT('',(186.6704,-85.958814,1.585)); +#191380 = DIRECTION('',(0.,0.,-1.)); +#191381 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#191382 = ORIENTED_EDGE('',*,*,#191383,.T.); +#191383 = EDGE_CURVE('',#191375,#191384,#191386,.T.); +#191384 = VERTEX_POINT('',#191385); +#191385 = CARTESIAN_POINT('',(185.04894,-86.0667,1.585)); +#191386 = LINE('',#191387,#191388); +#191387 = CARTESIAN_POINT('',(186.69186,-86.0667,1.585)); +#191388 = VECTOR('',#191389,1.); +#191389 = DIRECTION('',(-1.,0.,0.)); +#191390 = ORIENTED_EDGE('',*,*,#191391,.T.); +#191391 = EDGE_CURVE('',#191384,#191392,#191394,.T.); +#191392 = VERTEX_POINT('',#191393); +#191393 = CARTESIAN_POINT('',(184.962514,-85.980274,1.585)); +#191394 = CIRCLE('',#191395,0.109995194153); +#191395 = AXIS2_PLACEMENT_3D('',#191396,#191397,#191398); +#191396 = CARTESIAN_POINT('',(185.07039621987,-85.95881778012,1.585)); +#191397 = DIRECTION('',(0.,0.,-1.)); +#191398 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#191399 = ORIENTED_EDGE('',*,*,#191400,.T.); +#191400 = EDGE_CURVE('',#191392,#191401,#191403,.T.); +#191401 = VERTEX_POINT('',#191402); +#191402 = CARTESIAN_POINT('',(184.962514,-85.32783,1.585)); +#191403 = LINE('',#191404,#191405); +#191404 = CARTESIAN_POINT('',(184.962514,-85.980274,1.585)); +#191405 = VECTOR('',#191406,1.); +#191406 = DIRECTION('',(0.,1.,0.)); +#191407 = ORIENTED_EDGE('',*,*,#191408,.T.); +#191408 = EDGE_CURVE('',#191401,#191409,#191411,.T.); +#191409 = VERTEX_POINT('',#191410); +#191410 = CARTESIAN_POINT('',(184.972013,-85.300097,1.585)); +#191411 = LINE('',#191412,#191413); +#191412 = CARTESIAN_POINT('',(184.962514,-85.32783,1.585)); +#191413 = VECTOR('',#191414,1.); +#191414 = DIRECTION('',(0.324035635351,0.946044875797,0.)); +#191415 = ORIENTED_EDGE('',*,*,#191416,.T.); +#191416 = EDGE_CURVE('',#191409,#191417,#191419,.T.); +#191417 = VERTEX_POINT('',#191418); +#191418 = CARTESIAN_POINT('',(185.061884,-85.127564,1.585)); +#191419 = LINE('',#191420,#191421); +#191420 = CARTESIAN_POINT('',(184.972013,-85.300097,1.585)); +#191421 = VECTOR('',#191422,1.); +#191422 = DIRECTION('',(0.461975106506,0.886892891486,0.)); +#191423 = ORIENTED_EDGE('',*,*,#191424,.T.); +#191424 = EDGE_CURVE('',#191417,#191268,#191425,.T.); +#191425 = LINE('',#191426,#191427); +#191426 = CARTESIAN_POINT('',(185.061884,-85.127564,1.585)); +#191427 = VECTOR('',#191428,1.); +#191428 = DIRECTION('',(0.717700626173,0.696351786951,0.)); +#191429 = FACE_BOUND('',#191430,.F.); +#191430 = EDGE_LOOP('',(#191431,#191442,#191450,#191458,#191466,#191474, + #191482,#191490)); +#191431 = ORIENTED_EDGE('',*,*,#191432,.T.); +#191432 = EDGE_CURVE('',#191433,#191435,#191437,.T.); +#191433 = VERTEX_POINT('',#191434); +#191434 = CARTESIAN_POINT('',(185.690955,-85.211123,1.585)); +#191435 = VERTEX_POINT('',#191436); +#191436 = CARTESIAN_POINT('',(185.287938,-85.211123,1.585)); +#191437 = CIRCLE('',#191438,0.330157797413); +#191438 = AXIS2_PLACEMENT_3D('',#191439,#191440,#191441); +#191439 = CARTESIAN_POINT('',(185.4894465,-85.47265406052,1.585)); +#191440 = DIRECTION('',(0.,0.,1.)); +#191441 = DIRECTION('',(0.610339969491,0.792139584696,-0.)); +#191442 = ORIENTED_EDGE('',*,*,#191443,.T.); +#191443 = EDGE_CURVE('',#191435,#191444,#191446,.T.); +#191444 = VERTEX_POINT('',#191445); +#191445 = CARTESIAN_POINT('',(185.236993,-85.262068,1.585)); +#191446 = LINE('',#191447,#191448); +#191447 = CARTESIAN_POINT('',(185.287938,-85.211123,1.585)); +#191448 = VECTOR('',#191449,1.); +#191449 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#191450 = ORIENTED_EDGE('',*,*,#191451,.T.); +#191451 = EDGE_CURVE('',#191444,#191452,#191454,.T.); +#191452 = VERTEX_POINT('',#191453); +#191453 = CARTESIAN_POINT('',(185.1804,-85.375256,1.585)); +#191454 = LINE('',#191455,#191456); +#191455 = CARTESIAN_POINT('',(185.236993,-85.262068,1.585)); +#191456 = VECTOR('',#191457,1.); +#191457 = DIRECTION('',(-0.447207273756,-0.894430351844,0.)); +#191458 = ORIENTED_EDGE('',*,*,#191459,.T.); +#191459 = EDGE_CURVE('',#191452,#191460,#191462,.T.); +#191460 = VERTEX_POINT('',#191461); +#191461 = CARTESIAN_POINT('',(185.1804,-85.848814,1.585)); +#191462 = LINE('',#191463,#191464); +#191463 = CARTESIAN_POINT('',(185.1804,-85.375256,1.585)); +#191464 = VECTOR('',#191465,1.); +#191465 = DIRECTION('',(0.,-1.,0.)); +#191466 = ORIENTED_EDGE('',*,*,#191467,.T.); +#191467 = EDGE_CURVE('',#191460,#191468,#191470,.T.); +#191468 = VERTEX_POINT('',#191469); +#191469 = CARTESIAN_POINT('',(185.798495,-85.848814,1.585)); +#191470 = LINE('',#191471,#191472); +#191471 = CARTESIAN_POINT('',(185.1804,-85.848814,1.585)); +#191472 = VECTOR('',#191473,1.); +#191473 = DIRECTION('',(1.,0.,0.)); +#191474 = ORIENTED_EDGE('',*,*,#191475,.T.); +#191475 = EDGE_CURVE('',#191468,#191476,#191478,.T.); +#191476 = VERTEX_POINT('',#191477); +#191477 = CARTESIAN_POINT('',(185.798495,-85.375256,1.585)); +#191478 = LINE('',#191479,#191480); +#191479 = CARTESIAN_POINT('',(185.798495,-85.848814,1.585)); +#191480 = VECTOR('',#191481,1.); +#191481 = DIRECTION('',(0.,1.,0.)); +#191482 = ORIENTED_EDGE('',*,*,#191483,.T.); +#191483 = EDGE_CURVE('',#191476,#191484,#191486,.T.); +#191484 = VERTEX_POINT('',#191485); +#191485 = CARTESIAN_POINT('',(185.741901,-85.262069,1.585)); +#191486 = LINE('',#191487,#191488); +#191487 = CARTESIAN_POINT('',(185.798495,-85.375256,1.585)); +#191488 = VECTOR('',#191489,1.); +#191489 = DIRECTION('',(-0.447216756375,0.894425610556,0.)); +#191490 = ORIENTED_EDGE('',*,*,#191491,.T.); +#191491 = EDGE_CURVE('',#191484,#191433,#191492,.T.); +#191492 = LINE('',#191493,#191494); +#191493 = CARTESIAN_POINT('',(185.741901,-85.262069,1.585)); +#191494 = VECTOR('',#191495,1.); +#191495 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#191496 = PLANE('',#191497); +#191497 = AXIS2_PLACEMENT_3D('',#191498,#191499,#191500); +#191498 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191499 = DIRECTION('',(0.,0.,1.)); +#191500 = DIRECTION('',(1.,0.,-0.)); +#191501 = SHELL_BASED_SURFACE_MODEL('',(#191502)); +#191502 = OPEN_SHELL('',(#191503)); +#191503 = ADVANCED_FACE('',(#191504),#191540,.T.); +#191504 = FACE_BOUND('',#191505,.F.); +#191505 = EDGE_LOOP('',(#191506,#191517,#191525,#191534)); +#191506 = ORIENTED_EDGE('',*,*,#191507,.T.); +#191507 = EDGE_CURVE('',#191508,#191510,#191512,.T.); +#191508 = VERTEX_POINT('',#191509); +#191509 = CARTESIAN_POINT('',(169.642858,-85.460311,1.585)); +#191510 = VERTEX_POINT('',#191511); +#191511 = CARTESIAN_POINT('',(169.642858,-85.330311,1.585)); +#191512 = CIRCLE('',#191513,6.500000000092E-02); +#191513 = AXIS2_PLACEMENT_3D('',#191514,#191515,#191516); +#191514 = CARTESIAN_POINT('',(169.64285834486,-85.395311,1.585)); +#191515 = DIRECTION('',(0.,0.,-1.)); +#191516 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#191517 = ORIENTED_EDGE('',*,*,#191518,.T.); +#191518 = EDGE_CURVE('',#191510,#191519,#191521,.T.); +#191519 = VERTEX_POINT('',#191520); +#191520 = CARTESIAN_POINT('',(170.328572,-85.330311,1.585)); +#191521 = LINE('',#191522,#191523); +#191522 = CARTESIAN_POINT('',(169.642858,-85.330311,1.585)); +#191523 = VECTOR('',#191524,1.); +#191524 = DIRECTION('',(1.,0.,0.)); +#191525 = ORIENTED_EDGE('',*,*,#191526,.T.); +#191526 = EDGE_CURVE('',#191519,#191527,#191529,.T.); +#191527 = VERTEX_POINT('',#191528); +#191528 = CARTESIAN_POINT('',(170.328572,-85.460311,1.585)); +#191529 = CIRCLE('',#191530,6.500000000092E-02); +#191530 = AXIS2_PLACEMENT_3D('',#191531,#191532,#191533); +#191531 = CARTESIAN_POINT('',(170.32857165513,-85.395311,1.585)); +#191532 = DIRECTION('',(0.,0.,-1.)); +#191533 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#191534 = ORIENTED_EDGE('',*,*,#191535,.T.); +#191535 = EDGE_CURVE('',#191527,#191508,#191536,.T.); +#191536 = LINE('',#191537,#191538); +#191537 = CARTESIAN_POINT('',(170.328572,-85.460311,1.585)); +#191538 = VECTOR('',#191539,1.); +#191539 = DIRECTION('',(-1.,0.,0.)); +#191540 = PLANE('',#191541); +#191541 = AXIS2_PLACEMENT_3D('',#191542,#191543,#191544); +#191542 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191543 = DIRECTION('',(0.,0.,1.)); +#191544 = DIRECTION('',(1.,0.,-0.)); +#191545 = SHELL_BASED_SURFACE_MODEL('',(#191546)); +#191546 = OPEN_SHELL('',(#191547)); +#191547 = ADVANCED_FACE('',(#191548),#191592,.T.); +#191548 = FACE_BOUND('',#191549,.F.); +#191549 = EDGE_LOOP('',(#191550,#191561,#191569,#191578,#191586)); +#191550 = ORIENTED_EDGE('',*,*,#191551,.T.); +#191551 = EDGE_CURVE('',#191552,#191554,#191556,.T.); +#191552 = VERTEX_POINT('',#191553); +#191553 = CARTESIAN_POINT('',(151.056688,-84.66084,1.585)); +#191554 = VERTEX_POINT('',#191555); +#191555 = CARTESIAN_POINT('',(151.18174,-84.685714,1.585)); +#191556 = CIRCLE('',#191557,6.499988811647E-02); +#191557 = AXIS2_PLACEMENT_3D('',#191558,#191559,#191560); +#191558 = CARTESIAN_POINT('',(151.11674011188,-84.6857142701,1.585)); +#191559 = DIRECTION('',(0.,0.,-1.)); +#191560 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#191561 = ORIENTED_EDGE('',*,*,#191562,.T.); +#191562 = EDGE_CURVE('',#191554,#191563,#191565,.T.); +#191563 = VERTEX_POINT('',#191564); +#191564 = CARTESIAN_POINT('',(151.18174,-85.371428,1.585)); +#191565 = LINE('',#191566,#191567); +#191566 = CARTESIAN_POINT('',(151.18174,-84.685714,1.585)); +#191567 = VECTOR('',#191568,1.); +#191568 = DIRECTION('',(0.,-1.,0.)); +#191569 = ORIENTED_EDGE('',*,*,#191570,.T.); +#191570 = EDGE_CURVE('',#191563,#191571,#191573,.T.); +#191571 = VERTEX_POINT('',#191572); +#191572 = CARTESIAN_POINT('',(151.05174,-85.371428,1.585)); +#191573 = CIRCLE('',#191574,6.500000000091E-02); +#191574 = AXIS2_PLACEMENT_3D('',#191575,#191576,#191577); +#191575 = CARTESIAN_POINT('',(151.11674,-85.37142765513,1.585)); +#191576 = DIRECTION('',(-0.,0.,-1.)); +#191577 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#191578 = ORIENTED_EDGE('',*,*,#191579,.T.); +#191579 = EDGE_CURVE('',#191571,#191580,#191582,.T.); +#191580 = VERTEX_POINT('',#191581); +#191581 = CARTESIAN_POINT('',(151.05174,-84.685714,1.585)); +#191582 = LINE('',#191583,#191584); +#191583 = CARTESIAN_POINT('',(151.05174,-85.371428,1.585)); +#191584 = VECTOR('',#191585,1.); +#191585 = DIRECTION('',(0.,1.,0.)); +#191586 = ORIENTED_EDGE('',*,*,#191587,.T.); +#191587 = EDGE_CURVE('',#191580,#191552,#191588,.T.); +#191588 = LINE('',#191589,#191590); +#191589 = CARTESIAN_POINT('',(151.05174,-84.685714,1.585)); +#191590 = VECTOR('',#191591,1.); +#191591 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#191592 = PLANE('',#191593); +#191593 = AXIS2_PLACEMENT_3D('',#191594,#191595,#191596); +#191594 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191595 = DIRECTION('',(0.,0.,1.)); +#191596 = DIRECTION('',(1.,0.,-0.)); +#191597 = SHELL_BASED_SURFACE_MODEL('',(#191598)); +#191598 = OPEN_SHELL('',(#191599)); +#191599 = ADVANCED_FACE('',(#191600),#191814,.T.); +#191600 = FACE_BOUND('',#191601,.F.); +#191601 = EDGE_LOOP('',(#191602,#191613,#191621,#191629,#191637,#191645, + #191653,#191661,#191669,#191677,#191685,#191694,#191702,#191710, + #191718,#191726,#191734,#191742,#191750,#191759,#191767,#191775, + #191783,#191791,#191799,#191808)); +#191602 = ORIENTED_EDGE('',*,*,#191603,.T.); +#191603 = EDGE_CURVE('',#191604,#191606,#191608,.T.); +#191604 = VERTEX_POINT('',#191605); +#191605 = CARTESIAN_POINT('',(199.670714,-84.459597,1.585)); +#191606 = VERTEX_POINT('',#191607); +#191607 = CARTESIAN_POINT('',(199.735714,-84.394597,1.585)); +#191608 = CIRCLE('',#191609,6.500103935386E-02); +#191609 = AXIS2_PLACEMENT_3D('',#191610,#191611,#191612); +#191610 = CARTESIAN_POINT('',(199.73571503934,-84.45959803934,1.585)); +#191611 = DIRECTION('',(0.,0.,-1.)); +#191612 = DIRECTION('',(-0.999999999872,1.59896756177E-05,0.)); +#191613 = ORIENTED_EDGE('',*,*,#191614,.T.); +#191614 = EDGE_CURVE('',#191606,#191615,#191617,.T.); +#191615 = VERTEX_POINT('',#191616); +#191616 = CARTESIAN_POINT('',(199.913044,-84.396202,1.585)); +#191617 = LINE('',#191618,#191619); +#191618 = CARTESIAN_POINT('',(199.735714,-84.394597,1.585)); +#191619 = VECTOR('',#191620,1.); +#191620 = DIRECTION('',(0.999959042922,-9.050551310479E-03,0.)); +#191621 = ORIENTED_EDGE('',*,*,#191622,.T.); +#191622 = EDGE_CURVE('',#191615,#191623,#191625,.T.); +#191623 = VERTEX_POINT('',#191624); +#191624 = CARTESIAN_POINT('',(199.902882,-84.420736,1.585)); +#191625 = LINE('',#191626,#191627); +#191626 = CARTESIAN_POINT('',(199.913044,-84.396202,1.585)); +#191627 = VECTOR('',#191628,1.); +#191628 = DIRECTION('',(-0.382673290122,-0.923883733501,0.)); +#191629 = ORIENTED_EDGE('',*,*,#191630,.T.); +#191630 = EDGE_CURVE('',#191623,#191631,#191633,.T.); +#191631 = VERTEX_POINT('',#191632); +#191632 = CARTESIAN_POINT('',(199.902882,-84.479264,1.585)); +#191633 = LINE('',#191634,#191635); +#191634 = CARTESIAN_POINT('',(199.902882,-84.420736,1.585)); +#191635 = VECTOR('',#191636,1.); +#191636 = DIRECTION('',(0.,-1.,0.)); +#191637 = ORIENTED_EDGE('',*,*,#191638,.T.); +#191638 = EDGE_CURVE('',#191631,#191639,#191641,.T.); +#191639 = VERTEX_POINT('',#191640); +#191640 = CARTESIAN_POINT('',(199.92166,-84.524597,1.585)); +#191641 = LINE('',#191642,#191643); +#191642 = CARTESIAN_POINT('',(199.902882,-84.479264,1.585)); +#191643 = VECTOR('',#191644,1.); +#191644 = DIRECTION('',(0.382691374609,-0.923876242686,0.)); +#191645 = ORIENTED_EDGE('',*,*,#191646,.T.); +#191646 = EDGE_CURVE('',#191639,#191647,#191649,.T.); +#191647 = VERTEX_POINT('',#191648); +#191648 = CARTESIAN_POINT('',(199.800714,-84.524597,1.585)); +#191649 = LINE('',#191650,#191651); +#191650 = CARTESIAN_POINT('',(199.92166,-84.524597,1.585)); +#191651 = VECTOR('',#191652,1.); +#191652 = DIRECTION('',(-1.,0.,0.)); +#191653 = ORIENTED_EDGE('',*,*,#191654,.T.); +#191654 = EDGE_CURVE('',#191647,#191655,#191657,.T.); +#191655 = VERTEX_POINT('',#191656); +#191656 = CARTESIAN_POINT('',(199.800714,-85.294597,1.585)); +#191657 = LINE('',#191658,#191659); +#191658 = CARTESIAN_POINT('',(199.800714,-84.524597,1.585)); +#191659 = VECTOR('',#191660,1.); +#191660 = DIRECTION('',(0.,-1.,0.)); +#191661 = ORIENTED_EDGE('',*,*,#191662,.T.); +#191662 = EDGE_CURVE('',#191655,#191663,#191665,.T.); +#191663 = VERTEX_POINT('',#191664); +#191664 = CARTESIAN_POINT('',(199.939453,-85.294597,1.585)); +#191665 = LINE('',#191666,#191667); +#191666 = CARTESIAN_POINT('',(199.800714,-85.294597,1.585)); +#191667 = VECTOR('',#191668,1.); +#191668 = DIRECTION('',(1.,0.,0.)); +#191669 = ORIENTED_EDGE('',*,*,#191670,.T.); +#191670 = EDGE_CURVE('',#191663,#191671,#191673,.T.); +#191671 = VERTEX_POINT('',#191672); +#191672 = CARTESIAN_POINT('',(200.043458,-85.259928,1.585)); +#191673 = LINE('',#191674,#191675); +#191674 = CARTESIAN_POINT('',(199.939453,-85.294597,1.585)); +#191675 = VECTOR('',#191676,1.); +#191676 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#191677 = ORIENTED_EDGE('',*,*,#191678,.T.); +#191678 = EDGE_CURVE('',#191671,#191679,#191681,.T.); +#191679 = VERTEX_POINT('',#191680); +#191680 = CARTESIAN_POINT('',(200.110865,-85.192522,1.585)); +#191681 = LINE('',#191682,#191683); +#191682 = CARTESIAN_POINT('',(200.043458,-85.259928,1.585)); +#191683 = VECTOR('',#191684,1.); +#191684 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#191685 = ORIENTED_EDGE('',*,*,#191686,.T.); +#191686 = EDGE_CURVE('',#191679,#191687,#191689,.T.); +#191687 = VERTEX_POINT('',#191688); +#191688 = CARTESIAN_POINT('',(200.185,-84.853311,1.585)); +#191689 = CIRCLE('',#191690,0.553325470752); +#191690 = AXIS2_PLACEMENT_3D('',#191691,#191692,#191693); +#191691 = CARTESIAN_POINT('',(199.63466292366,-84.91074077444,1.585)); +#191692 = DIRECTION('',(0.,0.,1.)); +#191693 = DIRECTION('',(0.860618390997,-0.509250414902,0.)); +#191694 = ORIENTED_EDGE('',*,*,#191695,.T.); +#191695 = EDGE_CURVE('',#191687,#191696,#191698,.T.); +#191696 = VERTEX_POINT('',#191697); +#191697 = CARTESIAN_POINT('',(200.145814,-84.69657,1.585)); +#191698 = LINE('',#191699,#191700); +#191699 = CARTESIAN_POINT('',(200.185,-84.853311,1.585)); +#191700 = VECTOR('',#191701,1.); +#191701 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#191702 = ORIENTED_EDGE('',*,*,#191703,.T.); +#191703 = EDGE_CURVE('',#191696,#191704,#191706,.T.); +#191704 = VERTEX_POINT('',#191705); +#191705 = CARTESIAN_POINT('',(200.110864,-84.626669,1.585)); +#191706 = LINE('',#191707,#191708); +#191707 = CARTESIAN_POINT('',(200.145814,-84.69657,1.585)); +#191708 = VECTOR('',#191709,1.); +#191709 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#191710 = ORIENTED_EDGE('',*,*,#191711,.T.); +#191711 = EDGE_CURVE('',#191704,#191712,#191714,.T.); +#191712 = VERTEX_POINT('',#191713); +#191713 = CARTESIAN_POINT('',(200.080712,-84.596518,1.585)); +#191714 = LINE('',#191715,#191716); +#191715 = CARTESIAN_POINT('',(200.110864,-84.626669,1.585)); +#191716 = VECTOR('',#191717,1.); +#191717 = DIRECTION('',(-0.707118506986,0.707095055192,0.)); +#191718 = ORIENTED_EDGE('',*,*,#191719,.T.); +#191719 = EDGE_CURVE('',#191712,#191720,#191722,.T.); +#191720 = VERTEX_POINT('',#191721); +#191721 = CARTESIAN_POINT('',(200.133336,-84.57472,1.585)); +#191722 = LINE('',#191723,#191724); +#191723 = CARTESIAN_POINT('',(200.080712,-84.596518,1.585)); +#191724 = VECTOR('',#191725,1.); +#191725 = DIRECTION('',(0.923876891429,0.38268980844,0.)); +#191726 = ORIENTED_EDGE('',*,*,#191727,.T.); +#191727 = EDGE_CURVE('',#191720,#191728,#191730,.T.); +#191728 = VERTEX_POINT('',#191729); +#191729 = CARTESIAN_POINT('',(200.17472,-84.533336,1.585)); +#191730 = LINE('',#191731,#191732); +#191731 = CARTESIAN_POINT('',(200.133336,-84.57472,1.585)); +#191732 = VECTOR('',#191733,1.); +#191733 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#191734 = ORIENTED_EDGE('',*,*,#191735,.T.); +#191735 = EDGE_CURVE('',#191728,#191736,#191738,.T.); +#191736 = VERTEX_POINT('',#191737); +#191737 = CARTESIAN_POINT('',(200.181564,-84.516811,1.585)); +#191738 = LINE('',#191739,#191740); +#191739 = CARTESIAN_POINT('',(200.17472,-84.533336,1.585)); +#191740 = VECTOR('',#191741,1.); +#191741 = DIRECTION('',(0.382641479261,0.92389690894,0.)); +#191742 = ORIENTED_EDGE('',*,*,#191743,.T.); +#191743 = EDGE_CURVE('',#191736,#191744,#191746,.T.); +#191744 = VERTEX_POINT('',#191745); +#191745 = CARTESIAN_POINT('',(200.216037,-84.55087,1.585)); +#191746 = LINE('',#191747,#191748); +#191747 = CARTESIAN_POINT('',(200.181564,-84.516811,1.585)); +#191748 = VECTOR('',#191749,1.); +#191749 = DIRECTION('',(0.711365414616,-0.70282234376,0.)); +#191750 = ORIENTED_EDGE('',*,*,#191751,.T.); +#191751 = EDGE_CURVE('',#191744,#191752,#191754,.T.); +#191752 = VERTEX_POINT('',#191753); +#191753 = CARTESIAN_POINT('',(200.313059,-84.989647,1.585)); +#191754 = CIRCLE('',#191755,0.67543082859); +#191755 = AXIS2_PLACEMENT_3D('',#191756,#191757,#191758); +#191756 = CARTESIAN_POINT('',(199.64260778858,-84.90778139475,1.585)); +#191757 = DIRECTION('',(0.,0.,-1.)); +#191758 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#191759 = ORIENTED_EDGE('',*,*,#191760,.T.); +#191760 = EDGE_CURVE('',#191752,#191761,#191763,.T.); +#191761 = VERTEX_POINT('',#191762); +#191762 = CARTESIAN_POINT('',(200.265281,-85.17438,1.585)); +#191763 = LINE('',#191764,#191765); +#191764 = CARTESIAN_POINT('',(200.313059,-84.989647,1.585)); +#191765 = VECTOR('',#191766,1.); +#191766 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#191767 = ORIENTED_EDGE('',*,*,#191768,.T.); +#191768 = EDGE_CURVE('',#191761,#191769,#191771,.T.); +#191769 = VERTEX_POINT('',#191770); +#191770 = CARTESIAN_POINT('',(200.210248,-85.276987,1.585)); +#191771 = LINE('',#191772,#191773); +#191772 = CARTESIAN_POINT('',(200.265281,-85.17438,1.585)); +#191773 = VECTOR('',#191774,1.); +#191774 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#191775 = ORIENTED_EDGE('',*,*,#191776,.T.); +#191776 = EDGE_CURVE('',#191769,#191777,#191779,.T.); +#191777 = VERTEX_POINT('',#191778); +#191778 = CARTESIAN_POINT('',(200.112114,-85.370999,1.585)); +#191779 = LINE('',#191780,#191781); +#191780 = CARTESIAN_POINT('',(200.210248,-85.276987,1.585)); +#191781 = VECTOR('',#191782,1.); +#191782 = DIRECTION('',(-0.722109804107,-0.691778455007,0.)); +#191783 = ORIENTED_EDGE('',*,*,#191784,.T.); +#191784 = EDGE_CURVE('',#191777,#191785,#191787,.T.); +#191785 = VERTEX_POINT('',#191786); +#191786 = CARTESIAN_POINT('',(199.960222,-85.422563,1.585)); +#191787 = LINE('',#191788,#191789); +#191788 = CARTESIAN_POINT('',(200.112114,-85.370999,1.585)); +#191789 = VECTOR('',#191790,1.); +#191790 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#191791 = ORIENTED_EDGE('',*,*,#191792,.T.); +#191792 = EDGE_CURVE('',#191785,#191793,#191795,.T.); +#191793 = VERTEX_POINT('',#191794); +#191794 = CARTESIAN_POINT('',(199.735714,-85.424597,1.585)); +#191795 = LINE('',#191796,#191797); +#191796 = CARTESIAN_POINT('',(199.960222,-85.422563,1.585)); +#191797 = VECTOR('',#191798,1.); +#191798 = DIRECTION('',(-0.999958962441,-9.059438993769E-03,0.)); +#191799 = ORIENTED_EDGE('',*,*,#191800,.T.); +#191800 = EDGE_CURVE('',#191793,#191801,#191803,.T.); +#191801 = VERTEX_POINT('',#191802); +#191802 = CARTESIAN_POINT('',(199.670714,-85.359597,1.585)); +#191803 = CIRCLE('',#191804,6.500103935387E-02); +#191804 = AXIS2_PLACEMENT_3D('',#191805,#191806,#191807); +#191805 = CARTESIAN_POINT('',(199.73571503934,-85.35959596065,1.585)); +#191806 = DIRECTION('',(0.,0.,-1.)); +#191807 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#191808 = ORIENTED_EDGE('',*,*,#191809,.T.); +#191809 = EDGE_CURVE('',#191801,#191604,#191810,.T.); +#191810 = LINE('',#191811,#191812); +#191811 = CARTESIAN_POINT('',(199.670714,-85.359597,1.585)); +#191812 = VECTOR('',#191813,1.); +#191813 = DIRECTION('',(0.,1.,0.)); +#191814 = PLANE('',#191815); +#191815 = AXIS2_PLACEMENT_3D('',#191816,#191817,#191818); +#191816 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191817 = DIRECTION('',(0.,0.,1.)); +#191818 = DIRECTION('',(1.,0.,-0.)); +#191819 = SHELL_BASED_SURFACE_MODEL('',(#191820)); +#191820 = OPEN_SHELL('',(#191821)); +#191821 = ADVANCED_FACE('',(#191822),#191940,.T.); +#191822 = FACE_BOUND('',#191823,.F.); +#191823 = EDGE_LOOP('',(#191824,#191835,#191843,#191851,#191859,#191867, + #191875,#191883,#191892,#191900,#191909,#191917,#191925,#191934)); +#191824 = ORIENTED_EDGE('',*,*,#191825,.T.); +#191825 = EDGE_CURVE('',#191826,#191828,#191830,.T.); +#191826 = VERTEX_POINT('',#191827); +#191827 = CARTESIAN_POINT('',(198.727857,-84.459597,1.585)); +#191828 = VERTEX_POINT('',#191829); +#191829 = CARTESIAN_POINT('',(198.78466,-84.395116,1.585)); +#191830 = CIRCLE('',#191831,6.499996854972E-02); +#191831 = AXIS2_PLACEMENT_3D('',#191832,#191833,#191834); +#191832 = CARTESIAN_POINT('',(198.79285696855,-84.45959704851,1.585)); +#191833 = DIRECTION('',(0.,0.,-1.)); +#191834 = DIRECTION('',(-1.,7.464405904505E-07,0.)); +#191835 = ORIENTED_EDGE('',*,*,#191836,.T.); +#191836 = EDGE_CURVE('',#191828,#191837,#191839,.T.); +#191837 = VERTEX_POINT('',#191838); +#191838 = CARTESIAN_POINT('',(198.800899,-84.399545,1.585)); +#191839 = LINE('',#191840,#191841); +#191840 = CARTESIAN_POINT('',(198.78466,-84.395116,1.585)); +#191841 = VECTOR('',#191842,1.); +#191842 = DIRECTION('',(0.964761079179,-0.2631274598,0.)); +#191843 = ORIENTED_EDGE('',*,*,#191844,.T.); +#191844 = EDGE_CURVE('',#191837,#191845,#191847,.T.); +#191845 = VERTEX_POINT('',#191846); +#191846 = CARTESIAN_POINT('',(198.817731,-84.399545,1.585)); +#191847 = LINE('',#191848,#191849); +#191848 = CARTESIAN_POINT('',(198.800899,-84.399545,1.585)); +#191849 = VECTOR('',#191850,1.); +#191850 = DIRECTION('',(1.,0.,0.)); +#191851 = ORIENTED_EDGE('',*,*,#191852,.T.); +#191852 = EDGE_CURVE('',#191845,#191853,#191855,.T.); +#191853 = VERTEX_POINT('',#191854); +#191854 = CARTESIAN_POINT('',(198.832656,-84.408206,1.585)); +#191855 = LINE('',#191856,#191857); +#191856 = CARTESIAN_POINT('',(198.817731,-84.399545,1.585)); +#191857 = VECTOR('',#191858,1.); +#191858 = DIRECTION('',(0.86491798857,-0.501913212665,0.)); +#191859 = ORIENTED_EDGE('',*,*,#191860,.T.); +#191860 = EDGE_CURVE('',#191853,#191861,#191863,.T.); +#191861 = VERTEX_POINT('',#191862); +#191862 = CARTESIAN_POINT('',(198.849293,-84.427348,1.585)); +#191863 = LINE('',#191864,#191865); +#191864 = CARTESIAN_POINT('',(198.832656,-84.408206,1.585)); +#191865 = VECTOR('',#191866,1.); +#191866 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#191867 = ORIENTED_EDGE('',*,*,#191868,.T.); +#191868 = EDGE_CURVE('',#191861,#191869,#191871,.T.); +#191869 = VERTEX_POINT('',#191870); +#191870 = CARTESIAN_POINT('',(199.242143,-85.114835,1.585)); +#191871 = LINE('',#191872,#191873); +#191872 = CARTESIAN_POINT('',(198.849293,-84.427348,1.585)); +#191873 = VECTOR('',#191874,1.); +#191874 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#191875 = ORIENTED_EDGE('',*,*,#191876,.T.); +#191876 = EDGE_CURVE('',#191869,#191877,#191879,.T.); +#191877 = VERTEX_POINT('',#191878); +#191878 = CARTESIAN_POINT('',(199.242143,-84.459597,1.585)); +#191879 = LINE('',#191880,#191881); +#191880 = CARTESIAN_POINT('',(199.242143,-85.114835,1.585)); +#191881 = VECTOR('',#191882,1.); +#191882 = DIRECTION('',(0.,1.,0.)); +#191883 = ORIENTED_EDGE('',*,*,#191884,.T.); +#191884 = EDGE_CURVE('',#191877,#191885,#191887,.T.); +#191885 = VERTEX_POINT('',#191886); +#191886 = CARTESIAN_POINT('',(199.372143,-84.459597,1.585)); +#191887 = CIRCLE('',#191888,6.500000000092E-02); +#191888 = AXIS2_PLACEMENT_3D('',#191889,#191890,#191891); +#191889 = CARTESIAN_POINT('',(199.307143,-84.45959734486,1.585)); +#191890 = DIRECTION('',(0.,0.,-1.)); +#191891 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#191892 = ORIENTED_EDGE('',*,*,#191893,.T.); +#191893 = EDGE_CURVE('',#191885,#191894,#191896,.T.); +#191894 = VERTEX_POINT('',#191895); +#191895 = CARTESIAN_POINT('',(199.372143,-85.359597,1.585)); +#191896 = LINE('',#191897,#191898); +#191897 = CARTESIAN_POINT('',(199.372143,-84.459597,1.585)); +#191898 = VECTOR('',#191899,1.); +#191899 = DIRECTION('',(0.,-1.,0.)); +#191900 = ORIENTED_EDGE('',*,*,#191901,.T.); +#191901 = EDGE_CURVE('',#191894,#191902,#191904,.T.); +#191902 = VERTEX_POINT('',#191903); +#191903 = CARTESIAN_POINT('',(199.250707,-85.391846,1.585)); +#191904 = CIRCLE('',#191905,6.500021194141E-02); +#191905 = AXIS2_PLACEMENT_3D('',#191906,#191907,#191908); +#191906 = CARTESIAN_POINT('',(199.30714278806,-85.35959651351,1.585)); +#191907 = DIRECTION('',(-0.,0.,-1.)); +#191908 = DIRECTION('',(0.999999999972,-7.484331896833E-06,-0.)); +#191909 = ORIENTED_EDGE('',*,*,#191910,.T.); +#191910 = EDGE_CURVE('',#191902,#191911,#191913,.T.); +#191911 = VERTEX_POINT('',#191912); +#191912 = CARTESIAN_POINT('',(198.857857,-84.704358,1.585)); +#191913 = LINE('',#191914,#191915); +#191914 = CARTESIAN_POINT('',(199.250707,-85.391846,1.585)); +#191915 = VECTOR('',#191916,1.); +#191916 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#191917 = ORIENTED_EDGE('',*,*,#191918,.T.); +#191918 = EDGE_CURVE('',#191911,#191919,#191921,.T.); +#191919 = VERTEX_POINT('',#191920); +#191920 = CARTESIAN_POINT('',(198.857857,-85.359597,1.585)); +#191921 = LINE('',#191922,#191923); +#191922 = CARTESIAN_POINT('',(198.857857,-84.704358,1.585)); +#191923 = VECTOR('',#191924,1.); +#191924 = DIRECTION('',(0.,-1.,0.)); +#191925 = ORIENTED_EDGE('',*,*,#191926,.T.); +#191926 = EDGE_CURVE('',#191919,#191927,#191929,.T.); +#191927 = VERTEX_POINT('',#191928); +#191928 = CARTESIAN_POINT('',(198.727857,-85.359597,1.585)); +#191929 = CIRCLE('',#191930,6.500000000091E-02); +#191930 = AXIS2_PLACEMENT_3D('',#191931,#191932,#191933); +#191931 = CARTESIAN_POINT('',(198.792857,-85.35959665513,1.585)); +#191932 = DIRECTION('',(-0.,0.,-1.)); +#191933 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#191934 = ORIENTED_EDGE('',*,*,#191935,.T.); +#191935 = EDGE_CURVE('',#191927,#191826,#191936,.T.); +#191936 = LINE('',#191937,#191938); +#191937 = CARTESIAN_POINT('',(198.727857,-85.359597,1.585)); +#191938 = VECTOR('',#191939,1.); +#191939 = DIRECTION('',(0.,1.,0.)); +#191940 = PLANE('',#191941); +#191941 = AXIS2_PLACEMENT_3D('',#191942,#191943,#191944); +#191942 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191943 = DIRECTION('',(0.,0.,1.)); +#191944 = DIRECTION('',(1.,0.,-0.)); +#191945 = SHELL_BASED_SURFACE_MODEL('',(#191946)); +#191946 = OPEN_SHELL('',(#191947)); +#191947 = ADVANCED_FACE('',(#191948),#192198,.T.); +#191948 = FACE_BOUND('',#191949,.F.); +#191949 = EDGE_LOOP('',(#191950,#191960,#191968,#191977,#191985,#191994, + #192002,#192010,#192018,#192026,#192035,#192043,#192051,#192059, + #192068,#192076,#192084,#192092,#192101,#192109,#192118,#192126, + #192134,#192142,#192150,#192159,#192167,#192176,#192184,#192192)); +#191950 = ORIENTED_EDGE('',*,*,#191951,.T.); +#191951 = EDGE_CURVE('',#191952,#191954,#191956,.T.); +#191952 = VERTEX_POINT('',#191953); +#191953 = CARTESIAN_POINT('',(197.987892,-84.44819,1.585)); +#191954 = VERTEX_POINT('',#191955); +#191955 = CARTESIAN_POINT('',(198.139777,-84.39663,1.585)); +#191956 = LINE('',#191957,#191958); +#191957 = CARTESIAN_POINT('',(197.987892,-84.44819,1.585)); +#191958 = VECTOR('',#191959,1.); +#191959 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#191960 = ORIENTED_EDGE('',*,*,#191961,.T.); +#191961 = EDGE_CURVE('',#191954,#191962,#191964,.T.); +#191962 = VERTEX_POINT('',#191963); +#191963 = CARTESIAN_POINT('',(198.281765,-84.395232,1.585)); +#191964 = LINE('',#191965,#191966); +#191965 = CARTESIAN_POINT('',(198.139777,-84.39663,1.585)); +#191966 = VECTOR('',#191967,1.); +#191967 = DIRECTION('',(0.999951532626,9.845425265658E-03,0.)); +#191968 = ORIENTED_EDGE('',*,*,#191969,.T.); +#191969 = EDGE_CURVE('',#191962,#191970,#191972,.T.); +#191970 = VERTEX_POINT('',#191971); +#191971 = CARTESIAN_POINT('',(198.41339,-84.459866,1.585)); +#191972 = CIRCLE('',#191973,0.276414597199); +#191973 = AXIS2_PLACEMENT_3D('',#191974,#191975,#191976); +#191974 = CARTESIAN_POINT('',(198.23010572554,-84.66677637741,1.585)); +#191975 = DIRECTION('',(0.,0.,-1.)); +#191976 = DIRECTION('',(0.186890544039,0.982380743169,0.)); +#191977 = ORIENTED_EDGE('',*,*,#191978,.T.); +#191978 = EDGE_CURVE('',#191970,#191979,#191981,.T.); +#191979 = VERTEX_POINT('',#191980); +#191980 = CARTESIAN_POINT('',(198.429122,-84.507062,1.585)); +#191981 = LINE('',#191982,#191983); +#191982 = CARTESIAN_POINT('',(198.41339,-84.459866,1.585)); +#191983 = VECTOR('',#191984,1.); +#191984 = DIRECTION('',(0.316227766017,-0.94868329805,0.)); +#191985 = ORIENTED_EDGE('',*,*,#191986,.T.); +#191986 = EDGE_CURVE('',#191979,#191987,#191989,.T.); +#191987 = VERTEX_POINT('',#191988); +#191988 = CARTESIAN_POINT('',(198.335217,-84.560592,1.585)); +#191989 = CIRCLE('',#191990,6.50002600426E-02); +#191990 = AXIS2_PLACEMENT_3D('',#191991,#191992,#191993); +#191991 = CARTESIAN_POINT('',(198.36428530559,-84.50245365279,1.585)); +#191992 = DIRECTION('',(0.,0.,-1.)); +#191993 = DIRECTION('',(0.997483615677,-7.089736565088E-02,0.)); +#191994 = ORIENTED_EDGE('',*,*,#191995,.T.); +#191995 = EDGE_CURVE('',#191987,#191996,#191998,.T.); +#191996 = VERTEX_POINT('',#191997); +#191997 = CARTESIAN_POINT('',(198.263227,-84.524597,1.585)); +#191998 = LINE('',#191999,#192000); +#191999 = CARTESIAN_POINT('',(198.335217,-84.560592,1.585)); +#192000 = VECTOR('',#192001,1.); +#192001 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#192002 = ORIENTED_EDGE('',*,*,#192003,.T.); +#192003 = EDGE_CURVE('',#191996,#192004,#192006,.T.); +#192004 = VERTEX_POINT('',#192005); +#192005 = CARTESIAN_POINT('',(198.160547,-84.524597,1.585)); +#192006 = LINE('',#192007,#192008); +#192007 = CARTESIAN_POINT('',(198.263227,-84.524597,1.585)); +#192008 = VECTOR('',#192009,1.); +#192009 = DIRECTION('',(-1.,0.,0.)); +#192010 = ORIENTED_EDGE('',*,*,#192011,.T.); +#192011 = EDGE_CURVE('',#192004,#192012,#192014,.T.); +#192012 = VERTEX_POINT('',#192013); +#192013 = CARTESIAN_POINT('',(198.056541,-84.559265,1.585)); +#192014 = LINE('',#192015,#192016); +#192015 = CARTESIAN_POINT('',(198.160547,-84.524597,1.585)); +#192016 = VECTOR('',#192017,1.); +#192017 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#192018 = ORIENTED_EDGE('',*,*,#192019,.T.); +#192019 = EDGE_CURVE('',#192012,#192020,#192022,.T.); +#192020 = VERTEX_POINT('',#192021); +#192021 = CARTESIAN_POINT('',(197.989134,-84.626671,1.585)); +#192022 = LINE('',#192023,#192024); +#192023 = CARTESIAN_POINT('',(198.056541,-84.559265,1.585)); +#192024 = VECTOR('',#192025,1.); +#192025 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#192026 = ORIENTED_EDGE('',*,*,#192027,.T.); +#192027 = EDGE_CURVE('',#192020,#192028,#192030,.T.); +#192028 = VERTEX_POINT('',#192029); +#192029 = CARTESIAN_POINT('',(197.915,-84.965881,1.585)); +#192030 = CIRCLE('',#192031,0.553307903116); +#192031 = AXIS2_PLACEMENT_3D('',#192032,#192033,#192034); +#192032 = CARTESIAN_POINT('',(198.46531893982,-84.90844668868,1.585)); +#192033 = DIRECTION('',(0.,0.,1.)); +#192034 = DIRECTION('',(-0.860614744786,0.509256576842,0.)); +#192035 = ORIENTED_EDGE('',*,*,#192036,.T.); +#192036 = EDGE_CURVE('',#192028,#192037,#192039,.T.); +#192037 = VERTEX_POINT('',#192038); +#192038 = CARTESIAN_POINT('',(197.954185,-85.122622,1.585)); +#192039 = LINE('',#192040,#192041); +#192040 = CARTESIAN_POINT('',(197.915,-84.965881,1.585)); +#192041 = VECTOR('',#192042,1.); +#192042 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#192043 = ORIENTED_EDGE('',*,*,#192044,.T.); +#192044 = EDGE_CURVE('',#192037,#192045,#192047,.T.); +#192045 = VERTEX_POINT('',#192046); +#192046 = CARTESIAN_POINT('',(197.989135,-85.192522,1.585)); +#192047 = LINE('',#192048,#192049); +#192048 = CARTESIAN_POINT('',(197.954185,-85.122622,1.585)); +#192049 = VECTOR('',#192050,1.); +#192050 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#192051 = ORIENTED_EDGE('',*,*,#192052,.T.); +#192052 = EDGE_CURVE('',#192045,#192053,#192055,.T.); +#192053 = VERTEX_POINT('',#192054); +#192054 = CARTESIAN_POINT('',(198.056541,-85.259928,1.585)); +#192055 = LINE('',#192056,#192057); +#192056 = CARTESIAN_POINT('',(197.989135,-85.192522,1.585)); +#192057 = VECTOR('',#192058,1.); +#192058 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#192059 = ORIENTED_EDGE('',*,*,#192060,.T.); +#192060 = EDGE_CURVE('',#192053,#192061,#192063,.T.); +#192061 = VERTEX_POINT('',#192062); +#192062 = CARTESIAN_POINT('',(198.329175,-85.259927,1.585)); +#192063 = CIRCLE('',#192064,0.272195913583); +#192064 = AXIS2_PLACEMENT_3D('',#192065,#192066,#192067); +#192065 = CARTESIAN_POINT('',(198.19285713583,-85.02432552445,1.585)); +#192066 = DIRECTION('',(0.,0.,1.)); +#192067 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#192068 = ORIENTED_EDGE('',*,*,#192069,.T.); +#192069 = EDGE_CURVE('',#192061,#192070,#192072,.T.); +#192070 = VERTEX_POINT('',#192071); +#192071 = CARTESIAN_POINT('',(198.342143,-85.246958,1.585)); +#192072 = LINE('',#192073,#192074); +#192073 = CARTESIAN_POINT('',(198.329175,-85.259927,1.585)); +#192074 = VECTOR('',#192075,1.); +#192075 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#192076 = ORIENTED_EDGE('',*,*,#192077,.T.); +#192077 = EDGE_CURVE('',#192070,#192078,#192080,.T.); +#192078 = VERTEX_POINT('',#192079); +#192079 = CARTESIAN_POINT('',(198.342143,-85.038882,1.585)); +#192080 = LINE('',#192081,#192082); +#192081 = CARTESIAN_POINT('',(198.342143,-85.246958,1.585)); +#192082 = VECTOR('',#192083,1.); +#192083 = DIRECTION('',(0.,1.,0.)); +#192084 = ORIENTED_EDGE('',*,*,#192085,.T.); +#192085 = EDGE_CURVE('',#192078,#192086,#192088,.T.); +#192086 = VERTEX_POINT('',#192087); +#192087 = CARTESIAN_POINT('',(198.235714,-85.038882,1.585)); +#192088 = LINE('',#192089,#192090); +#192089 = CARTESIAN_POINT('',(198.342143,-85.038882,1.585)); +#192090 = VECTOR('',#192091,1.); +#192091 = DIRECTION('',(-1.,0.,0.)); +#192092 = ORIENTED_EDGE('',*,*,#192093,.T.); +#192093 = EDGE_CURVE('',#192086,#192094,#192096,.T.); +#192094 = VERTEX_POINT('',#192095); +#192095 = CARTESIAN_POINT('',(198.235714,-84.908882,1.585)); +#192096 = CIRCLE('',#192097,6.500000000091E-02); +#192097 = AXIS2_PLACEMENT_3D('',#192098,#192099,#192100); +#192098 = CARTESIAN_POINT('',(198.23571434486,-84.973882,1.585)); +#192099 = DIRECTION('',(0.,0.,-1.)); +#192100 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#192101 = ORIENTED_EDGE('',*,*,#192102,.T.); +#192102 = EDGE_CURVE('',#192094,#192103,#192105,.T.); +#192103 = VERTEX_POINT('',#192104); +#192104 = CARTESIAN_POINT('',(198.407143,-84.908882,1.585)); +#192105 = LINE('',#192106,#192107); +#192106 = CARTESIAN_POINT('',(198.235714,-84.908882,1.585)); +#192107 = VECTOR('',#192108,1.); +#192108 = DIRECTION('',(1.,0.,0.)); +#192109 = ORIENTED_EDGE('',*,*,#192110,.T.); +#192110 = EDGE_CURVE('',#192103,#192111,#192113,.T.); +#192111 = VERTEX_POINT('',#192112); +#192112 = CARTESIAN_POINT('',(198.472143,-84.973882,1.585)); +#192113 = CIRCLE('',#192114,6.500103935387E-02); +#192114 = AXIS2_PLACEMENT_3D('',#192115,#192116,#192117); +#192115 = CARTESIAN_POINT('',(198.40714196065,-84.97388303934,1.585)); +#192116 = DIRECTION('',(0.,0.,-1.)); +#192117 = DIRECTION('',(1.598967605495E-05,0.999999999872,0.)); +#192118 = ORIENTED_EDGE('',*,*,#192119,.T.); +#192119 = EDGE_CURVE('',#192111,#192120,#192122,.T.); +#192120 = VERTEX_POINT('',#192121); +#192121 = CARTESIAN_POINT('',(198.472143,-85.273882,1.585)); +#192122 = LINE('',#192123,#192124); +#192123 = CARTESIAN_POINT('',(198.472143,-84.973882,1.585)); +#192124 = VECTOR('',#192125,1.); +#192125 = DIRECTION('',(0.,-1.,0.)); +#192126 = ORIENTED_EDGE('',*,*,#192127,.T.); +#192127 = EDGE_CURVE('',#192120,#192128,#192130,.T.); +#192128 = VERTEX_POINT('',#192129); +#192129 = CARTESIAN_POINT('',(198.467195,-85.298756,1.585)); +#192130 = LINE('',#192131,#192132); +#192131 = CARTESIAN_POINT('',(198.472143,-85.273882,1.585)); +#192132 = VECTOR('',#192133,1.); +#192133 = DIRECTION('',(-0.19509994748,-0.98078336573,0.)); +#192134 = ORIENTED_EDGE('',*,*,#192135,.T.); +#192135 = EDGE_CURVE('',#192128,#192136,#192138,.T.); +#192136 = VERTEX_POINT('',#192137); +#192137 = CARTESIAN_POINT('',(198.453106,-85.319843,1.585)); +#192138 = LINE('',#192139,#192140); +#192139 = CARTESIAN_POINT('',(198.467195,-85.298756,1.585)); +#192140 = VECTOR('',#192141,1.); +#192141 = DIRECTION('',(-0.55554616352,-0.831485694524,0.)); +#192142 = ORIENTED_EDGE('',*,*,#192143,.T.); +#192143 = EDGE_CURVE('',#192136,#192144,#192146,.T.); +#192144 = VERTEX_POINT('',#192145); +#192145 = CARTESIAN_POINT('',(198.397819,-85.371005,1.585)); +#192146 = LINE('',#192147,#192148); +#192147 = CARTESIAN_POINT('',(198.453106,-85.319843,1.585)); +#192148 = VECTOR('',#192149,1.); +#192149 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#192150 = ORIENTED_EDGE('',*,*,#192151,.T.); +#192151 = EDGE_CURVE('',#192144,#192152,#192154,.T.); +#192152 = VERTEX_POINT('',#192153); +#192153 = CARTESIAN_POINT('',(197.987885,-85.370999,1.585)); +#192154 = CIRCLE('',#192155,0.409311833232); +#192155 = AXIS2_PLACEMENT_3D('',#192156,#192157,#192158); +#192156 = CARTESIAN_POINT('',(198.19285718563,-85.01670734057,1.585)); +#192157 = DIRECTION('',(-0.,0.,-1.)); +#192158 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#192159 = ORIENTED_EDGE('',*,*,#192160,.T.); +#192160 = EDGE_CURVE('',#192152,#192161,#192163,.T.); +#192161 = VERTEX_POINT('',#192162); +#192162 = CARTESIAN_POINT('',(197.883962,-85.268322,1.585)); +#192163 = LINE('',#192164,#192165); +#192164 = CARTESIAN_POINT('',(197.987885,-85.370999,1.585)); +#192165 = VECTOR('',#192166,1.); +#192166 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#192167 = ORIENTED_EDGE('',*,*,#192168,.T.); +#192168 = EDGE_CURVE('',#192161,#192169,#192171,.T.); +#192169 = VERTEX_POINT('',#192170); +#192170 = CARTESIAN_POINT('',(197.786941,-84.829546,1.585)); +#192171 = CIRCLE('',#192172,0.675436077441); +#192172 = AXIS2_PLACEMENT_3D('',#192173,#192174,#192175); +#192173 = CARTESIAN_POINT('',(198.45739758405,-84.91141091072,1.585)); +#192174 = DIRECTION('',(0.,0.,-1.)); +#192175 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#192176 = ORIENTED_EDGE('',*,*,#192177,.T.); +#192177 = EDGE_CURVE('',#192169,#192178,#192180,.T.); +#192178 = VERTEX_POINT('',#192179); +#192179 = CARTESIAN_POINT('',(197.834719,-84.644813,1.585)); +#192180 = LINE('',#192181,#192182); +#192181 = CARTESIAN_POINT('',(197.786941,-84.829546,1.585)); +#192182 = VECTOR('',#192183,1.); +#192183 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#192184 = ORIENTED_EDGE('',*,*,#192185,.T.); +#192185 = EDGE_CURVE('',#192178,#192186,#192188,.T.); +#192186 = VERTEX_POINT('',#192187); +#192187 = CARTESIAN_POINT('',(197.889752,-84.542206,1.585)); +#192188 = LINE('',#192189,#192190); +#192189 = CARTESIAN_POINT('',(197.834719,-84.644813,1.585)); +#192190 = VECTOR('',#192191,1.); +#192191 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#192192 = ORIENTED_EDGE('',*,*,#192193,.T.); +#192193 = EDGE_CURVE('',#192186,#191952,#192194,.T.); +#192194 = LINE('',#192195,#192196); +#192195 = CARTESIAN_POINT('',(197.889752,-84.542206,1.585)); +#192196 = VECTOR('',#192197,1.); +#192197 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#192198 = PLANE('',#192199); +#192199 = AXIS2_PLACEMENT_3D('',#192200,#192201,#192202); +#192200 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192201 = DIRECTION('',(0.,0.,1.)); +#192202 = DIRECTION('',(1.,0.,-0.)); +#192203 = SHELL_BASED_SURFACE_MODEL('',(#192204)); +#192204 = OPEN_SHELL('',(#192205)); +#192205 = ADVANCED_FACE('',(#192206,#192332,#192399),#192451,.T.); +#192206 = FACE_BOUND('',#192207,.F.); +#192207 = EDGE_LOOP('',(#192208,#192219,#192227,#192235,#192243,#192251, + #192260,#192268,#192276,#192285,#192293,#192301,#192309,#192317, + #192326)); +#192208 = ORIENTED_EDGE('',*,*,#192209,.T.); +#192209 = EDGE_CURVE('',#192210,#192212,#192214,.T.); +#192210 = VERTEX_POINT('',#192211); +#192211 = CARTESIAN_POINT('',(172.277857,-84.409597,1.585)); +#192212 = VERTEX_POINT('',#192213); +#192213 = CARTESIAN_POINT('',(172.342857,-84.344597,1.585)); +#192214 = CIRCLE('',#192215,6.500103935387E-02); +#192215 = AXIS2_PLACEMENT_3D('',#192216,#192217,#192218); +#192216 = CARTESIAN_POINT('',(172.34285803934,-84.40959803934,1.585)); +#192217 = DIRECTION('',(0.,0.,-1.)); +#192218 = DIRECTION('',(-0.999999999872,1.59896756177E-05,0.)); +#192219 = ORIENTED_EDGE('',*,*,#192220,.T.); +#192220 = EDGE_CURVE('',#192212,#192221,#192223,.T.); +#192221 = VERTEX_POINT('',#192222); +#192222 = CARTESIAN_POINT('',(172.64605,-84.345232,1.585)); +#192223 = LINE('',#192224,#192225); +#192224 = CARTESIAN_POINT('',(172.342857,-84.344597,1.585)); +#192225 = VECTOR('',#192226,1.); +#192226 = DIRECTION('',(0.999997806803,-2.094370936408E-03,0.)); +#192227 = ORIENTED_EDGE('',*,*,#192228,.T.); +#192228 = EDGE_CURVE('',#192221,#192229,#192231,.T.); +#192229 = VERTEX_POINT('',#192230); +#192230 = CARTESIAN_POINT('',(172.671926,-84.351459,1.585)); +#192231 = LINE('',#192232,#192233); +#192232 = CARTESIAN_POINT('',(172.64605,-84.345232,1.585)); +#192233 = VECTOR('',#192234,1.); +#192234 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#192235 = ORIENTED_EDGE('',*,*,#192236,.T.); +#192236 = EDGE_CURVE('',#192229,#192237,#192239,.T.); +#192237 = VERTEX_POINT('',#192238); +#192238 = CARTESIAN_POINT('',(172.774534,-84.406492,1.585)); +#192239 = LINE('',#192240,#192241); +#192240 = CARTESIAN_POINT('',(172.671926,-84.351459,1.585)); +#192241 = VECTOR('',#192242,1.); +#192242 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#192243 = ORIENTED_EDGE('',*,*,#192244,.T.); +#192244 = EDGE_CURVE('',#192237,#192245,#192247,.T.); +#192245 = VERTEX_POINT('',#192246); +#192246 = CARTESIAN_POINT('',(172.829567,-84.466242,1.585)); +#192247 = LINE('',#192248,#192249); +#192248 = CARTESIAN_POINT('',(172.774534,-84.406492,1.585)); +#192249 = VECTOR('',#192250,1.); +#192250 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#192251 = ORIENTED_EDGE('',*,*,#192252,.T.); +#192252 = EDGE_CURVE('',#192245,#192253,#192255,.T.); +#192253 = VERTEX_POINT('',#192254); +#192254 = CARTESIAN_POINT('',(172.82318,-84.789751,1.585)); +#192255 = CIRCLE('',#192256,0.260195634991); +#192256 = AXIS2_PLACEMENT_3D('',#192257,#192258,#192259); +#192257 = CARTESIAN_POINT('',(172.6226313306,-84.62397404239,1.585)); +#192258 = DIRECTION('',(0.,0.,-1.)); +#192259 = DIRECTION('',(0.795307997401,0.606205566842,0.)); +#192260 = ORIENTED_EDGE('',*,*,#192261,.T.); +#192261 = EDGE_CURVE('',#192253,#192262,#192264,.T.); +#192262 = VERTEX_POINT('',#192263); +#192263 = CARTESIAN_POINT('',(172.796304,-84.820973,1.585)); +#192264 = LINE('',#192265,#192266); +#192265 = CARTESIAN_POINT('',(172.82318,-84.789751,1.585)); +#192266 = VECTOR('',#192267,1.); +#192267 = DIRECTION('',(-0.652389160843,-0.757884148676,0.)); +#192268 = ORIENTED_EDGE('',*,*,#192269,.T.); +#192269 = EDGE_CURVE('',#192262,#192270,#192272,.T.); +#192270 = VERTEX_POINT('',#192271); +#192271 = CARTESIAN_POINT('',(172.817391,-84.835063,1.585)); +#192272 = LINE('',#192273,#192274); +#192273 = CARTESIAN_POINT('',(172.796304,-84.820973,1.585)); +#192274 = VECTOR('',#192275,1.); +#192275 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#192276 = ORIENTED_EDGE('',*,*,#192277,.T.); +#192277 = EDGE_CURVE('',#192270,#192278,#192280,.T.); +#192278 = VERTEX_POINT('',#192279); +#192279 = CARTESIAN_POINT('',(172.919227,-85.152824,1.585)); +#192280 = CIRCLE('',#192281,0.311668456373); +#192281 = AXIS2_PLACEMENT_3D('',#192282,#192283,#192284); +#192282 = CARTESIAN_POINT('',(172.61761646242,-85.07428540872,1.585)); +#192283 = DIRECTION('',(0.,0.,-1.)); +#192284 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#192285 = ORIENTED_EDGE('',*,*,#192286,.T.); +#192286 = EDGE_CURVE('',#192278,#192287,#192289,.T.); +#192287 = VERTEX_POINT('',#192288); +#192288 = CARTESIAN_POINT('',(172.866036,-85.26118,1.585)); +#192289 = LINE('',#192290,#192291); +#192290 = CARTESIAN_POINT('',(172.919227,-85.152824,1.585)); +#192291 = VECTOR('',#192292,1.); +#192292 = DIRECTION('',(-0.440660203323,-0.897673986037,0.)); +#192293 = ORIENTED_EDGE('',*,*,#192294,.T.); +#192294 = EDGE_CURVE('',#192287,#192295,#192297,.T.); +#192295 = VERTEX_POINT('',#192296); +#192296 = CARTESIAN_POINT('',(172.808736,-85.318484,1.585)); +#192297 = LINE('',#192298,#192299); +#192298 = CARTESIAN_POINT('',(172.866036,-85.26118,1.585)); +#192299 = VECTOR('',#192300,1.); +#192300 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#192301 = ORIENTED_EDGE('',*,*,#192302,.T.); +#192302 = EDGE_CURVE('',#192295,#192303,#192305,.T.); +#192303 = VERTEX_POINT('',#192304); +#192304 = CARTESIAN_POINT('',(172.70037,-85.371681,1.585)); +#192305 = LINE('',#192306,#192307); +#192306 = CARTESIAN_POINT('',(172.808736,-85.318484,1.585)); +#192307 = VECTOR('',#192308,1.); +#192308 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#192309 = ORIENTED_EDGE('',*,*,#192310,.T.); +#192310 = EDGE_CURVE('',#192303,#192311,#192313,.T.); +#192311 = VERTEX_POINT('',#192312); +#192312 = CARTESIAN_POINT('',(172.342857,-85.374597,1.585)); +#192313 = LINE('',#192314,#192315); +#192314 = CARTESIAN_POINT('',(172.70037,-85.371681,1.585)); +#192315 = VECTOR('',#192316,1.); +#192316 = DIRECTION('',(-0.999966738663,-8.156075471217E-03,0.)); +#192317 = ORIENTED_EDGE('',*,*,#192318,.T.); +#192318 = EDGE_CURVE('',#192311,#192319,#192321,.T.); +#192319 = VERTEX_POINT('',#192320); +#192320 = CARTESIAN_POINT('',(172.277857,-85.309597,1.585)); +#192321 = CIRCLE('',#192322,6.500103935387E-02); +#192322 = AXIS2_PLACEMENT_3D('',#192323,#192324,#192325); +#192323 = CARTESIAN_POINT('',(172.34285803934,-85.30959596065,1.585)); +#192324 = DIRECTION('',(0.,0.,-1.)); +#192325 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#192326 = ORIENTED_EDGE('',*,*,#192327,.T.); +#192327 = EDGE_CURVE('',#192319,#192210,#192328,.T.); +#192328 = LINE('',#192329,#192330); +#192329 = CARTESIAN_POINT('',(172.277857,-85.309597,1.585)); +#192330 = VECTOR('',#192331,1.); +#192331 = DIRECTION('',(0.,1.,0.)); +#192332 = FACE_BOUND('',#192333,.F.); +#192333 = EDGE_LOOP('',(#192334,#192344,#192352,#192360,#192368,#192377, + #192385,#192393)); +#192334 = ORIENTED_EDGE('',*,*,#192335,.T.); +#192335 = EDGE_CURVE('',#192336,#192338,#192340,.T.); +#192336 = VERTEX_POINT('',#192337); +#192337 = CARTESIAN_POINT('',(172.736317,-84.937837,1.585)); +#192338 = VERTEX_POINT('',#192339); +#192339 = CARTESIAN_POINT('',(172.63231,-84.903168,1.585)); +#192340 = LINE('',#192341,#192342); +#192341 = CARTESIAN_POINT('',(172.736317,-84.937837,1.585)); +#192342 = VECTOR('',#192343,1.); +#192343 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#192344 = ORIENTED_EDGE('',*,*,#192345,.T.); +#192345 = EDGE_CURVE('',#192338,#192346,#192348,.T.); +#192346 = VERTEX_POINT('',#192347); +#192347 = CARTESIAN_POINT('',(172.407857,-84.903168,1.585)); +#192348 = LINE('',#192349,#192350); +#192349 = CARTESIAN_POINT('',(172.63231,-84.903168,1.585)); +#192350 = VECTOR('',#192351,1.); +#192351 = DIRECTION('',(-1.,0.,0.)); +#192352 = ORIENTED_EDGE('',*,*,#192353,.T.); +#192353 = EDGE_CURVE('',#192346,#192354,#192356,.T.); +#192354 = VERTEX_POINT('',#192355); +#192355 = CARTESIAN_POINT('',(172.407857,-85.244597,1.585)); +#192356 = LINE('',#192357,#192358); +#192357 = CARTESIAN_POINT('',(172.407857,-84.903168,1.585)); +#192358 = VECTOR('',#192359,1.); +#192359 = DIRECTION('',(0.,-1.,0.)); +#192360 = ORIENTED_EDGE('',*,*,#192361,.T.); +#192361 = EDGE_CURVE('',#192354,#192362,#192364,.T.); +#192362 = VERTEX_POINT('',#192363); +#192363 = CARTESIAN_POINT('',(172.670369,-85.244597,1.585)); +#192364 = LINE('',#192365,#192366); +#192365 = CARTESIAN_POINT('',(172.407857,-85.244597,1.585)); +#192366 = VECTOR('',#192367,1.); +#192367 = DIRECTION('',(1.,0.,0.)); +#192368 = ORIENTED_EDGE('',*,*,#192369,.T.); +#192369 = EDGE_CURVE('',#192362,#192370,#192372,.T.); +#192370 = VERTEX_POINT('',#192371); +#192371 = CARTESIAN_POINT('',(172.792143,-85.122823,1.585)); +#192372 = CIRCLE('',#192373,0.170996196456); +#192373 = AXIS2_PLACEMENT_3D('',#192374,#192375,#192376); +#192374 = CARTESIAN_POINT('',(172.6267925,-85.0792465,1.585)); +#192375 = DIRECTION('',(0.,0.,1.)); +#192376 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#192377 = ORIENTED_EDGE('',*,*,#192378,.T.); +#192378 = EDGE_CURVE('',#192370,#192379,#192381,.T.); +#192379 = VERTEX_POINT('',#192380); +#192380 = CARTESIAN_POINT('',(172.792143,-85.024941,1.585)); +#192381 = LINE('',#192382,#192383); +#192382 = CARTESIAN_POINT('',(172.792143,-85.122823,1.585)); +#192383 = VECTOR('',#192384,1.); +#192384 = DIRECTION('',(0.,1.,0.)); +#192385 = ORIENTED_EDGE('',*,*,#192386,.T.); +#192386 = EDGE_CURVE('',#192379,#192387,#192389,.T.); +#192387 = VERTEX_POINT('',#192388); +#192388 = CARTESIAN_POINT('',(172.760864,-84.962384,1.585)); +#192389 = LINE('',#192390,#192391); +#192390 = CARTESIAN_POINT('',(172.792143,-85.024941,1.585)); +#192391 = VECTOR('',#192392,1.); +#192392 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#192393 = ORIENTED_EDGE('',*,*,#192394,.T.); +#192394 = EDGE_CURVE('',#192387,#192336,#192395,.T.); +#192395 = LINE('',#192396,#192397); +#192396 = CARTESIAN_POINT('',(172.760864,-84.962384,1.585)); +#192397 = VECTOR('',#192398,1.); +#192398 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#192399 = FACE_BOUND('',#192400,.F.); +#192400 = EDGE_LOOP('',(#192401,#192412,#192420,#192428,#192436,#192445) + ); +#192401 = ORIENTED_EDGE('',*,*,#192402,.T.); +#192402 = EDGE_CURVE('',#192403,#192405,#192407,.T.); +#192403 = VERTEX_POINT('',#192404); +#192404 = CARTESIAN_POINT('',(172.749286,-84.59637,1.585)); +#192405 = VERTEX_POINT('',#192406); +#192406 = CARTESIAN_POINT('',(172.627512,-84.474597,1.585)); +#192407 = CIRCLE('',#192408,0.170996278941); +#192408 = AXIS2_PLACEMENT_3D('',#192409,#192410,#192411); +#192409 = CARTESIAN_POINT('',(172.5839357157,-84.63994764214,1.585)); +#192410 = DIRECTION('',(0.,0.,1.)); +#192411 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#192412 = ORIENTED_EDGE('',*,*,#192413,.T.); +#192413 = EDGE_CURVE('',#192405,#192414,#192416,.T.); +#192414 = VERTEX_POINT('',#192415); +#192415 = CARTESIAN_POINT('',(172.407857,-84.474597,1.585)); +#192416 = LINE('',#192417,#192418); +#192417 = CARTESIAN_POINT('',(172.627512,-84.474597,1.585)); +#192418 = VECTOR('',#192419,1.); +#192419 = DIRECTION('',(-1.,0.,0.)); +#192420 = ORIENTED_EDGE('',*,*,#192421,.T.); +#192421 = EDGE_CURVE('',#192414,#192422,#192424,.T.); +#192422 = VERTEX_POINT('',#192423); +#192423 = CARTESIAN_POINT('',(172.407857,-84.773168,1.585)); +#192424 = LINE('',#192425,#192426); +#192425 = CARTESIAN_POINT('',(172.407857,-84.474597,1.585)); +#192426 = VECTOR('',#192427,1.); +#192427 = DIRECTION('',(0.,-1.,0.)); +#192428 = ORIENTED_EDGE('',*,*,#192429,.T.); +#192429 = EDGE_CURVE('',#192422,#192430,#192432,.T.); +#192430 = VERTEX_POINT('',#192431); +#192431 = CARTESIAN_POINT('',(172.627512,-84.773168,1.585)); +#192432 = LINE('',#192433,#192434); +#192433 = CARTESIAN_POINT('',(172.407857,-84.773168,1.585)); +#192434 = VECTOR('',#192435,1.); +#192435 = DIRECTION('',(1.,0.,0.)); +#192436 = ORIENTED_EDGE('',*,*,#192437,.T.); +#192437 = EDGE_CURVE('',#192430,#192438,#192440,.T.); +#192438 = VERTEX_POINT('',#192439); +#192439 = CARTESIAN_POINT('',(172.749286,-84.651395,1.585)); +#192440 = CIRCLE('',#192441,0.171001125777); +#192441 = AXIS2_PLACEMENT_3D('',#192442,#192443,#192444); +#192442 = CARTESIAN_POINT('',(172.58393174885,-84.60781339097,1.585)); +#192443 = DIRECTION('',(0.,0.,1.)); +#192444 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#192445 = ORIENTED_EDGE('',*,*,#192446,.T.); +#192446 = EDGE_CURVE('',#192438,#192403,#192447,.T.); +#192447 = LINE('',#192448,#192449); +#192448 = CARTESIAN_POINT('',(172.749286,-84.651395,1.585)); +#192449 = VECTOR('',#192450,1.); +#192450 = DIRECTION('',(0.,1.,0.)); +#192451 = PLANE('',#192452); +#192452 = AXIS2_PLACEMENT_3D('',#192453,#192454,#192455); +#192453 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192454 = DIRECTION('',(0.,0.,1.)); +#192455 = DIRECTION('',(1.,0.,-0.)); +#192456 = SHELL_BASED_SURFACE_MODEL('',(#192457)); +#192457 = OPEN_SHELL('',(#192458)); +#192458 = ADVANCED_FACE('',(#192459),#192520,.T.); +#192459 = FACE_BOUND('',#192460,.F.); +#192460 = EDGE_LOOP('',(#192461,#192472,#192480,#192489,#192497,#192506, + #192514)); +#192461 = ORIENTED_EDGE('',*,*,#192462,.T.); +#192462 = EDGE_CURVE('',#192463,#192465,#192467,.T.); +#192463 = VERTEX_POINT('',#192464); +#192464 = CARTESIAN_POINT('',(169.495478,-84.389042,1.585)); +#192465 = VERTEX_POINT('',#192466); +#192466 = CARTESIAN_POINT('',(169.618807,-84.430152,1.585)); +#192467 = CIRCLE('',#192468,6.500014296398E-02); +#192468 = AXIS2_PLACEMENT_3D('',#192469,#192470,#192471); +#192469 = CARTESIAN_POINT('',(169.55714240669,-84.40959727991,1.585)); +#192470 = DIRECTION('',(0.,0.,-1.)); +#192471 = DIRECTION('',(-0.948681093355,0.316234380027,0.)); +#192472 = ORIENTED_EDGE('',*,*,#192473,.T.); +#192473 = EDGE_CURVE('',#192465,#192474,#192476,.T.); +#192474 = VERTEX_POINT('',#192475); +#192475 = CARTESIAN_POINT('',(169.318807,-85.330152,1.585)); +#192476 = LINE('',#192477,#192478); +#192477 = CARTESIAN_POINT('',(169.618807,-84.430152,1.585)); +#192478 = VECTOR('',#192479,1.); +#192479 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#192480 = ORIENTED_EDGE('',*,*,#192481,.T.); +#192481 = EDGE_CURVE('',#192474,#192482,#192484,.T.); +#192482 = VERTEX_POINT('',#192483); +#192483 = CARTESIAN_POINT('',(169.195478,-85.330152,1.585)); +#192484 = CIRCLE('',#192485,6.500043802859E-02); +#192485 = AXIS2_PLACEMENT_3D('',#192486,#192487,#192488); +#192486 = CARTESIAN_POINT('',(169.2571425,-85.30959606694,1.585)); +#192487 = DIRECTION('',(-0.,0.,-1.)); +#192488 = DIRECTION('',(0.948678222336,-0.316242992755,-0.)); +#192489 = ORIENTED_EDGE('',*,*,#192490,.T.); +#192490 = EDGE_CURVE('',#192482,#192491,#192493,.T.); +#192491 = VERTEX_POINT('',#192492); +#192492 = CARTESIAN_POINT('',(168.895479,-84.430152,1.585)); +#192493 = LINE('',#192494,#192495); +#192494 = CARTESIAN_POINT('',(169.195478,-85.330152,1.585)); +#192495 = VECTOR('',#192496,1.); +#192496 = DIRECTION('',(-0.316226817333,0.948683614278,0.)); +#192497 = ORIENTED_EDGE('',*,*,#192498,.T.); +#192498 = EDGE_CURVE('',#192491,#192499,#192501,.T.); +#192499 = VERTEX_POINT('',#192500); +#192500 = CARTESIAN_POINT('',(169.018807,-84.389042,1.585)); +#192501 = CIRCLE('',#192502,6.499966862238E-02); +#192502 = AXIS2_PLACEMENT_3D('',#192503,#192504,#192505); +#192503 = CARTESIAN_POINT('',(168.95714304307,-84.40959712923,1.585)); +#192504 = DIRECTION('',(0.,0.,-1.)); +#192505 = DIRECTION('',(-0.948682422317,-0.316230393205,-0.)); +#192506 = ORIENTED_EDGE('',*,*,#192507,.T.); +#192507 = EDGE_CURVE('',#192499,#192508,#192510,.T.); +#192508 = VERTEX_POINT('',#192509); +#192509 = CARTESIAN_POINT('',(169.257142,-85.104049,1.585)); +#192510 = LINE('',#192511,#192512); +#192511 = CARTESIAN_POINT('',(169.018807,-84.389042,1.585)); +#192512 = VECTOR('',#192513,1.); +#192513 = DIRECTION('',(0.316226969926,-0.948683563414,0.)); +#192514 = ORIENTED_EDGE('',*,*,#192515,.T.); +#192515 = EDGE_CURVE('',#192508,#192463,#192516,.T.); +#192516 = LINE('',#192517,#192518); +#192517 = CARTESIAN_POINT('',(169.257142,-85.104049,1.585)); +#192518 = VECTOR('',#192519,1.); +#192519 = DIRECTION('',(0.316228164062,0.948683165369,0.)); +#192520 = PLANE('',#192521); +#192521 = AXIS2_PLACEMENT_3D('',#192522,#192523,#192524); +#192522 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192523 = DIRECTION('',(0.,0.,1.)); +#192524 = DIRECTION('',(1.,0.,-0.)); +#192525 = SHELL_BASED_SURFACE_MODEL('',(#192526)); +#192526 = OPEN_SHELL('',(#192527)); +#192527 = ADVANCED_FACE('',(#192528),#192792,.T.); +#192528 = FACE_BOUND('',#192529,.F.); +#192529 = EDGE_LOOP('',(#192530,#192540,#192548,#192556,#192565,#192573, + #192581,#192590,#192598,#192606,#192614,#192622,#192630,#192638, + #192646,#192655,#192663,#192671,#192679,#192687,#192696,#192704, + #192712,#192721,#192729,#192737,#192745,#192753,#192761,#192769, + #192777,#192786)); +#192530 = ORIENTED_EDGE('',*,*,#192531,.T.); +#192531 = EDGE_CURVE('',#192532,#192534,#192536,.T.); +#192532 = VERTEX_POINT('',#192533); +#192533 = CARTESIAN_POINT('',(171.491273,-84.400702,1.585)); +#192534 = VERTEX_POINT('',#192535); +#192535 = CARTESIAN_POINT('',(171.599629,-84.347512,1.585)); +#192536 = LINE('',#192537,#192538); +#192537 = CARTESIAN_POINT('',(171.491273,-84.400702,1.585)); +#192538 = VECTOR('',#192539,1.); +#192539 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#192540 = ORIENTED_EDGE('',*,*,#192541,.T.); +#192541 = EDGE_CURVE('',#192534,#192542,#192544,.T.); +#192542 = VERTEX_POINT('',#192543); +#192543 = CARTESIAN_POINT('',(171.838793,-84.34663,1.585)); +#192544 = LINE('',#192545,#192546); +#192545 = CARTESIAN_POINT('',(171.599629,-84.347512,1.585)); +#192546 = VECTOR('',#192547,1.); +#192547 = DIRECTION('',(0.999993199965,3.687820919367E-03,0.)); +#192548 = ORIENTED_EDGE('',*,*,#192549,.T.); +#192549 = EDGE_CURVE('',#192542,#192550,#192552,.T.); +#192550 = VERTEX_POINT('',#192551); +#192551 = CARTESIAN_POINT('',(171.977698,-84.39079,1.585)); +#192552 = LINE('',#192553,#192554); +#192553 = CARTESIAN_POINT('',(171.838793,-84.34663,1.585)); +#192554 = VECTOR('',#192555,1.); +#192555 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#192556 = ORIENTED_EDGE('',*,*,#192557,.T.); +#192557 = EDGE_CURVE('',#192550,#192558,#192560,.T.); +#192558 = VERTEX_POINT('',#192559); +#192559 = CARTESIAN_POINT('',(171.936589,-84.514119,1.585)); +#192560 = CIRCLE('',#192561,6.499998485858E-02); +#192561 = AXIS2_PLACEMENT_3D('',#192562,#192563,#192564); +#192562 = CARTESIAN_POINT('',(171.95714249751,-84.45245416584,1.585)); +#192563 = DIRECTION('',(0.,0.,-1.)); +#192564 = DIRECTION('',(0.316238573437,0.948679695509,0.)); +#192565 = ORIENTED_EDGE('',*,*,#192566,.T.); +#192566 = EDGE_CURVE('',#192558,#192567,#192569,.T.); +#192567 = VERTEX_POINT('',#192568); +#192568 = CARTESIAN_POINT('',(171.818024,-84.474597,1.585)); +#192569 = LINE('',#192570,#192571); +#192570 = CARTESIAN_POINT('',(171.936589,-84.514119,1.585)); +#192571 = VECTOR('',#192572,1.); +#192572 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#192573 = ORIENTED_EDGE('',*,*,#192574,.T.); +#192574 = EDGE_CURVE('',#192567,#192575,#192577,.T.); +#192575 = VERTEX_POINT('',#192576); +#192576 = CARTESIAN_POINT('',(171.629631,-84.474597,1.585)); +#192577 = LINE('',#192578,#192579); +#192578 = CARTESIAN_POINT('',(171.818024,-84.474597,1.585)); +#192579 = VECTOR('',#192580,1.); +#192580 = DIRECTION('',(-1.,0.,0.)); +#192581 = ORIENTED_EDGE('',*,*,#192582,.T.); +#192582 = EDGE_CURVE('',#192575,#192583,#192585,.T.); +#192583 = VERTEX_POINT('',#192584); +#192584 = CARTESIAN_POINT('',(171.507857,-84.59637,1.585)); +#192585 = CIRCLE('',#192586,0.170991742693); +#192586 = AXIS2_PLACEMENT_3D('',#192587,#192588,#192589); +#192587 = CARTESIAN_POINT('',(171.67320357161,-84.63994392943,1.585)); +#192588 = DIRECTION('',(0.,0.,1.)); +#192589 = DIRECTION('',(-0.254822665256,0.966987802028,0.)); +#192590 = ORIENTED_EDGE('',*,*,#192591,.T.); +#192591 = EDGE_CURVE('',#192583,#192592,#192594,.T.); +#192592 = VERTEX_POINT('',#192593); +#192593 = CARTESIAN_POINT('',(171.507857,-84.651395,1.585)); +#192594 = LINE('',#192595,#192596); +#192595 = CARTESIAN_POINT('',(171.507857,-84.59637,1.585)); +#192596 = VECTOR('',#192597,1.); +#192597 = DIRECTION('',(0.,-1.,0.)); +#192598 = ORIENTED_EDGE('',*,*,#192599,.T.); +#192599 = EDGE_CURVE('',#192592,#192600,#192602,.T.); +#192600 = VERTEX_POINT('',#192601); +#192601 = CARTESIAN_POINT('',(171.539135,-84.713951,1.585)); +#192602 = LINE('',#192603,#192604); +#192603 = CARTESIAN_POINT('',(171.507857,-84.651395,1.585)); +#192604 = VECTOR('',#192605,1.); +#192605 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#192606 = ORIENTED_EDGE('',*,*,#192607,.T.); +#192607 = EDGE_CURVE('',#192600,#192608,#192610,.T.); +#192608 = VERTEX_POINT('',#192609); +#192609 = CARTESIAN_POINT('',(171.567073,-84.741889,1.585)); +#192610 = LINE('',#192611,#192612); +#192611 = CARTESIAN_POINT('',(171.539135,-84.713951,1.585)); +#192612 = VECTOR('',#192613,1.); +#192613 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#192614 = ORIENTED_EDGE('',*,*,#192615,.T.); +#192615 = EDGE_CURVE('',#192608,#192616,#192618,.T.); +#192616 = VERTEX_POINT('',#192617); +#192617 = CARTESIAN_POINT('',(171.636974,-84.776839,1.585)); +#192618 = LINE('',#192619,#192620); +#192619 = CARTESIAN_POINT('',(171.567073,-84.741889,1.585)); +#192620 = VECTOR('',#192621,1.); +#192621 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#192622 = ORIENTED_EDGE('',*,*,#192623,.T.); +#192623 = EDGE_CURVE('',#192616,#192624,#192626,.T.); +#192624 = VERTEX_POINT('',#192625); +#192625 = CARTESIAN_POINT('',(171.814783,-84.822887,1.585)); +#192626 = LINE('',#192627,#192628); +#192627 = CARTESIAN_POINT('',(171.636974,-84.776839,1.585)); +#192628 = VECTOR('',#192629,1.); +#192629 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#192630 = ORIENTED_EDGE('',*,*,#192631,.T.); +#192631 = EDGE_CURVE('',#192624,#192632,#192634,.T.); +#192632 = VERTEX_POINT('',#192633); +#192633 = CARTESIAN_POINT('',(171.917391,-84.877921,1.585)); +#192634 = LINE('',#192635,#192636); +#192635 = CARTESIAN_POINT('',(171.814783,-84.822887,1.585)); +#192636 = VECTOR('',#192637,1.); +#192637 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#192638 = ORIENTED_EDGE('',*,*,#192639,.T.); +#192639 = EDGE_CURVE('',#192632,#192640,#192642,.T.); +#192640 = VERTEX_POINT('',#192641); +#192641 = CARTESIAN_POINT('',(171.972424,-84.937671,1.585)); +#192642 = LINE('',#192643,#192644); +#192643 = CARTESIAN_POINT('',(171.917391,-84.877921,1.585)); +#192644 = VECTOR('',#192645,1.); +#192645 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#192646 = ORIENTED_EDGE('',*,*,#192647,.T.); +#192647 = EDGE_CURVE('',#192640,#192648,#192650,.T.); +#192648 = VERTEX_POINT('',#192649); +#192649 = CARTESIAN_POINT('',(171.966036,-85.26118,1.585)); +#192650 = CIRCLE('',#192651,0.260194262446); +#192651 = AXIS2_PLACEMENT_3D('',#192652,#192653,#192654); +#192652 = CARTESIAN_POINT('',(171.76548960304,-85.09540244761,1.585)); +#192653 = DIRECTION('',(0.,0.,-1.)); +#192654 = DIRECTION('',(0.795307302373,0.606206478679,0.)); +#192655 = ORIENTED_EDGE('',*,*,#192656,.T.); +#192656 = EDGE_CURVE('',#192648,#192657,#192659,.T.); +#192657 = VERTEX_POINT('',#192658); +#192658 = CARTESIAN_POINT('',(171.908736,-85.318484,1.585)); +#192659 = LINE('',#192660,#192661); +#192660 = CARTESIAN_POINT('',(171.966036,-85.26118,1.585)); +#192661 = VECTOR('',#192662,1.); +#192662 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#192663 = ORIENTED_EDGE('',*,*,#192664,.T.); +#192664 = EDGE_CURVE('',#192657,#192665,#192667,.T.); +#192665 = VERTEX_POINT('',#192666); +#192666 = CARTESIAN_POINT('',(171.80037,-85.371681,1.585)); +#192667 = LINE('',#192668,#192669); +#192668 = CARTESIAN_POINT('',(171.908736,-85.318484,1.585)); +#192669 = VECTOR('',#192670,1.); +#192670 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#192671 = ORIENTED_EDGE('',*,*,#192672,.T.); +#192672 = EDGE_CURVE('',#192665,#192673,#192675,.T.); +#192673 = VERTEX_POINT('',#192674); +#192674 = CARTESIAN_POINT('',(171.561213,-85.372564,1.585)); +#192675 = LINE('',#192676,#192677); +#192676 = CARTESIAN_POINT('',(171.80037,-85.371681,1.585)); +#192677 = VECTOR('',#192678,1.); +#192678 = DIRECTION('',(-0.999993184138,-3.692110126803E-03,0.)); +#192679 = ORIENTED_EDGE('',*,*,#192680,.T.); +#192680 = EDGE_CURVE('',#192673,#192681,#192683,.T.); +#192681 = VERTEX_POINT('',#192682); +#192682 = CARTESIAN_POINT('',(171.422302,-85.328404,1.585)); +#192683 = LINE('',#192684,#192685); +#192684 = CARTESIAN_POINT('',(171.561213,-85.372564,1.585)); +#192685 = VECTOR('',#192686,1.); +#192686 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#192687 = ORIENTED_EDGE('',*,*,#192688,.T.); +#192688 = EDGE_CURVE('',#192681,#192689,#192691,.T.); +#192689 = VERTEX_POINT('',#192690); +#192690 = CARTESIAN_POINT('',(171.463412,-85.205076,1.585)); +#192691 = CIRCLE('',#192692,6.499966862238E-02); +#192692 = AXIS2_PLACEMENT_3D('',#192693,#192694,#192695); +#192693 = CARTESIAN_POINT('',(171.44285712923,-85.26674004307,1.585)); +#192694 = DIRECTION('',(0.,0.,-1.)); +#192695 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#192696 = ORIENTED_EDGE('',*,*,#192697,.T.); +#192697 = EDGE_CURVE('',#192689,#192698,#192700,.T.); +#192698 = VERTEX_POINT('',#192699); +#192699 = CARTESIAN_POINT('',(171.581976,-85.244597,1.585)); +#192700 = LINE('',#192701,#192702); +#192701 = CARTESIAN_POINT('',(171.463412,-85.205076,1.585)); +#192702 = VECTOR('',#192703,1.); +#192703 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#192704 = ORIENTED_EDGE('',*,*,#192705,.T.); +#192705 = EDGE_CURVE('',#192698,#192706,#192708,.T.); +#192706 = VERTEX_POINT('',#192707); +#192707 = CARTESIAN_POINT('',(171.770369,-85.244597,1.585)); +#192708 = LINE('',#192709,#192710); +#192709 = CARTESIAN_POINT('',(171.581976,-85.244597,1.585)); +#192710 = VECTOR('',#192711,1.); +#192711 = DIRECTION('',(1.,0.,0.)); +#192712 = ORIENTED_EDGE('',*,*,#192713,.T.); +#192713 = EDGE_CURVE('',#192706,#192714,#192716,.T.); +#192714 = VERTEX_POINT('',#192715); +#192715 = CARTESIAN_POINT('',(171.892143,-85.122823,1.585)); +#192716 = CIRCLE('',#192717,0.170996196456); +#192717 = AXIS2_PLACEMENT_3D('',#192718,#192719,#192720); +#192718 = CARTESIAN_POINT('',(171.7267925,-85.0792465,1.585)); +#192719 = DIRECTION('',(0.,0.,1.)); +#192720 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#192721 = ORIENTED_EDGE('',*,*,#192722,.T.); +#192722 = EDGE_CURVE('',#192714,#192723,#192725,.T.); +#192723 = VERTEX_POINT('',#192724); +#192724 = CARTESIAN_POINT('',(171.892143,-85.067799,1.585)); +#192725 = LINE('',#192726,#192727); +#192726 = CARTESIAN_POINT('',(171.892143,-85.122823,1.585)); +#192727 = VECTOR('',#192728,1.); +#192728 = DIRECTION('',(0.,1.,0.)); +#192729 = ORIENTED_EDGE('',*,*,#192730,.T.); +#192730 = EDGE_CURVE('',#192723,#192731,#192733,.T.); +#192731 = VERTEX_POINT('',#192732); +#192732 = CARTESIAN_POINT('',(171.860864,-85.005242,1.585)); +#192733 = LINE('',#192734,#192735); +#192734 = CARTESIAN_POINT('',(171.892143,-85.067799,1.585)); +#192735 = VECTOR('',#192736,1.); +#192736 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#192737 = ORIENTED_EDGE('',*,*,#192738,.T.); +#192738 = EDGE_CURVE('',#192731,#192739,#192741,.T.); +#192739 = VERTEX_POINT('',#192740); +#192740 = CARTESIAN_POINT('',(171.832927,-84.977303,1.585)); +#192741 = LINE('',#192742,#192743); +#192742 = CARTESIAN_POINT('',(171.860864,-85.005242,1.585)); +#192743 = VECTOR('',#192744,1.); +#192744 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#192745 = ORIENTED_EDGE('',*,*,#192746,.T.); +#192746 = EDGE_CURVE('',#192739,#192747,#192749,.T.); +#192747 = VERTEX_POINT('',#192748); +#192748 = CARTESIAN_POINT('',(171.763025,-84.942353,1.585)); +#192749 = LINE('',#192750,#192751); +#192750 = CARTESIAN_POINT('',(171.832927,-84.977303,1.585)); +#192751 = VECTOR('',#192752,1.); +#192752 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#192753 = ORIENTED_EDGE('',*,*,#192754,.T.); +#192754 = EDGE_CURVE('',#192747,#192755,#192757,.T.); +#192755 = VERTEX_POINT('',#192756); +#192756 = CARTESIAN_POINT('',(171.585217,-84.896306,1.585)); +#192757 = LINE('',#192758,#192759); +#192758 = CARTESIAN_POINT('',(171.763025,-84.942353,1.585)); +#192759 = VECTOR('',#192760,1.); +#192760 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#192761 = ORIENTED_EDGE('',*,*,#192762,.T.); +#192762 = EDGE_CURVE('',#192755,#192763,#192765,.T.); +#192763 = VERTEX_POINT('',#192764); +#192764 = CARTESIAN_POINT('',(171.482609,-84.841273,1.585)); +#192765 = LINE('',#192766,#192767); +#192766 = CARTESIAN_POINT('',(171.585217,-84.896306,1.585)); +#192767 = VECTOR('',#192768,1.); +#192768 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#192769 = ORIENTED_EDGE('',*,*,#192770,.T.); +#192770 = EDGE_CURVE('',#192763,#192771,#192773,.T.); +#192771 = VERTEX_POINT('',#192772); +#192772 = CARTESIAN_POINT('',(171.427576,-84.781523,1.585)); +#192773 = LINE('',#192774,#192775); +#192774 = CARTESIAN_POINT('',(171.482609,-84.841273,1.585)); +#192775 = VECTOR('',#192776,1.); +#192776 = DIRECTION('',(-0.677476455829,0.735544459429,0.)); +#192777 = ORIENTED_EDGE('',*,*,#192778,.T.); +#192778 = EDGE_CURVE('',#192771,#192779,#192781,.T.); +#192779 = VERTEX_POINT('',#192780); +#192780 = CARTESIAN_POINT('',(171.433962,-84.458013,1.585)); +#192781 = CIRCLE('',#192782,0.260194992517); +#192782 = AXIS2_PLACEMENT_3D('',#192783,#192784,#192785); +#192783 = CARTESIAN_POINT('',(171.63450997292,-84.62378979176,1.585)); +#192784 = DIRECTION('',(0.,0.,-1.)); +#192785 = DIRECTION('',(-0.795303441169,-0.606211544319,-0.)); +#192786 = ORIENTED_EDGE('',*,*,#192787,.T.); +#192787 = EDGE_CURVE('',#192779,#192532,#192788,.T.); +#192788 = LINE('',#192789,#192790); +#192789 = CARTESIAN_POINT('',(171.433962,-84.458013,1.585)); +#192790 = VECTOR('',#192791,1.); +#192791 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#192792 = PLANE('',#192793); +#192793 = AXIS2_PLACEMENT_3D('',#192794,#192795,#192796); +#192794 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192795 = DIRECTION('',(0.,0.,1.)); +#192796 = DIRECTION('',(1.,0.,-0.)); +#192797 = SHELL_BASED_SURFACE_MODEL('',(#192798)); +#192798 = OPEN_SHELL('',(#192799)); +#192799 = ADVANCED_FACE('',(#192800),#192912,.T.); +#192800 = FACE_BOUND('',#192801,.F.); +#192801 = EDGE_LOOP('',(#192802,#192813,#192821,#192830,#192838,#192847, + #192855,#192864,#192872,#192881,#192889,#192898,#192906)); +#192802 = ORIENTED_EDGE('',*,*,#192803,.T.); +#192803 = EDGE_CURVE('',#192804,#192806,#192808,.T.); +#192804 = VERTEX_POINT('',#192805); +#192805 = CARTESIAN_POINT('',(170.482805,-84.384723,1.585)); +#192806 = VERTEX_POINT('',#192807); +#192807 = CARTESIAN_POINT('',(170.607857,-84.409597,1.585)); +#192808 = CIRCLE('',#192809,6.499988811647E-02); +#192809 = AXIS2_PLACEMENT_3D('',#192810,#192811,#192812); +#192810 = CARTESIAN_POINT('',(170.54285711188,-84.4095972701,1.585)); +#192811 = DIRECTION('',(0.,0.,-1.)); +#192812 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#192813 = ORIENTED_EDGE('',*,*,#192814,.T.); +#192814 = EDGE_CURVE('',#192806,#192815,#192817,.T.); +#192815 = VERTEX_POINT('',#192816); +#192816 = CARTESIAN_POINT('',(170.607857,-85.122823,1.585)); +#192817 = LINE('',#192818,#192819); +#192818 = CARTESIAN_POINT('',(170.607857,-84.409597,1.585)); +#192819 = VECTOR('',#192820,1.); +#192820 = DIRECTION('',(0.,-1.,0.)); +#192821 = ORIENTED_EDGE('',*,*,#192822,.T.); +#192822 = EDGE_CURVE('',#192815,#192823,#192825,.T.); +#192823 = VERTEX_POINT('',#192824); +#192824 = CARTESIAN_POINT('',(170.729631,-85.244597,1.585)); +#192825 = CIRCLE('',#192826,0.170999251022); +#192826 = AXIS2_PLACEMENT_3D('',#192827,#192828,#192829); +#192827 = CARTESIAN_POINT('',(170.77321,-85.079244,1.585)); +#192828 = DIRECTION('',(0.,0.,1.)); +#192829 = DIRECTION('',(-0.966980843553,-0.254849069453,0.)); +#192830 = ORIENTED_EDGE('',*,*,#192831,.T.); +#192831 = EDGE_CURVE('',#192823,#192832,#192834,.T.); +#192832 = VERTEX_POINT('',#192833); +#192833 = CARTESIAN_POINT('',(170.870369,-85.244597,1.585)); +#192834 = LINE('',#192835,#192836); +#192835 = CARTESIAN_POINT('',(170.729631,-85.244597,1.585)); +#192836 = VECTOR('',#192837,1.); +#192837 = DIRECTION('',(1.,0.,0.)); +#192838 = ORIENTED_EDGE('',*,*,#192839,.T.); +#192839 = EDGE_CURVE('',#192832,#192840,#192842,.T.); +#192840 = VERTEX_POINT('',#192841); +#192841 = CARTESIAN_POINT('',(170.992143,-85.122823,1.585)); +#192842 = CIRCLE('',#192843,0.170996196456); +#192843 = AXIS2_PLACEMENT_3D('',#192844,#192845,#192846); +#192844 = CARTESIAN_POINT('',(170.8267925,-85.0792465,1.585)); +#192845 = DIRECTION('',(0.,0.,1.)); +#192846 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#192847 = ORIENTED_EDGE('',*,*,#192848,.T.); +#192848 = EDGE_CURVE('',#192840,#192849,#192851,.T.); +#192849 = VERTEX_POINT('',#192850); +#192850 = CARTESIAN_POINT('',(170.992143,-84.409597,1.585)); +#192851 = LINE('',#192852,#192853); +#192852 = CARTESIAN_POINT('',(170.992143,-85.122823,1.585)); +#192853 = VECTOR('',#192854,1.); +#192854 = DIRECTION('',(0.,1.,0.)); +#192855 = ORIENTED_EDGE('',*,*,#192856,.T.); +#192856 = EDGE_CURVE('',#192849,#192857,#192859,.T.); +#192857 = VERTEX_POINT('',#192858); +#192858 = CARTESIAN_POINT('',(171.122143,-84.409597,1.585)); +#192859 = CIRCLE('',#192860,6.500000000091E-02); +#192860 = AXIS2_PLACEMENT_3D('',#192861,#192862,#192863); +#192861 = CARTESIAN_POINT('',(171.057143,-84.40959734486,1.585)); +#192862 = DIRECTION('',(0.,0.,-1.)); +#192863 = DIRECTION('',(-0.999999999986,5.305658244297E-06,0.)); +#192864 = ORIENTED_EDGE('',*,*,#192865,.T.); +#192865 = EDGE_CURVE('',#192857,#192866,#192868,.T.); +#192866 = VERTEX_POINT('',#192867); +#192867 = CARTESIAN_POINT('',(171.119227,-85.152824,1.585)); +#192868 = LINE('',#192869,#192870); +#192869 = CARTESIAN_POINT('',(171.122143,-84.409597,1.585)); +#192870 = VECTOR('',#192871,1.); +#192871 = DIRECTION('',(-3.923401002397E-03,-0.999992303433,0.)); +#192872 = ORIENTED_EDGE('',*,*,#192873,.T.); +#192873 = EDGE_CURVE('',#192866,#192874,#192876,.T.); +#192874 = VERTEX_POINT('',#192875); +#192875 = CARTESIAN_POINT('',(170.90037,-85.371681,1.585)); +#192876 = CIRCLE('',#192877,0.308111908981); +#192877 = AXIS2_PLACEMENT_3D('',#192878,#192879,#192880); +#192878 = CARTESIAN_POINT('',(170.82140561898,-85.07385961898,1.585)); +#192879 = DIRECTION('',(0.,0.,-1.)); +#192880 = DIRECTION('',(0.966601330004,-0.256284741711,0.)); +#192881 = ORIENTED_EDGE('',*,*,#192882,.T.); +#192882 = EDGE_CURVE('',#192874,#192883,#192885,.T.); +#192883 = VERTEX_POINT('',#192884); +#192884 = CARTESIAN_POINT('',(170.699629,-85.371681,1.585)); +#192885 = LINE('',#192886,#192887); +#192886 = CARTESIAN_POINT('',(170.90037,-85.371681,1.585)); +#192887 = VECTOR('',#192888,1.); +#192888 = DIRECTION('',(-1.,0.,0.)); +#192889 = ORIENTED_EDGE('',*,*,#192890,.T.); +#192890 = EDGE_CURVE('',#192883,#192891,#192893,.T.); +#192891 = VERTEX_POINT('',#192892); +#192892 = CARTESIAN_POINT('',(170.480772,-85.152824,1.585)); +#192893 = CIRCLE('',#192894,0.308110297261); +#192894 = AXIS2_PLACEMENT_3D('',#192895,#192896,#192897); +#192895 = CARTESIAN_POINT('',(170.77859206304,-85.07386093695,1.585)); +#192896 = DIRECTION('',(0.,0.,-1.)); +#192897 = DIRECTION('',(-0.256281804756,-0.966602108704,-0.)); +#192898 = ORIENTED_EDGE('',*,*,#192899,.T.); +#192899 = EDGE_CURVE('',#192891,#192900,#192902,.T.); +#192900 = VERTEX_POINT('',#192901); +#192901 = CARTESIAN_POINT('',(170.477857,-84.409597,1.585)); +#192902 = LINE('',#192903,#192904); +#192903 = CARTESIAN_POINT('',(170.480772,-85.152824,1.585)); +#192904 = VECTOR('',#192905,1.); +#192905 = DIRECTION('',(-3.922055549506E-03,0.999992308711,0.)); +#192906 = ORIENTED_EDGE('',*,*,#192907,.T.); +#192907 = EDGE_CURVE('',#192900,#192804,#192908,.T.); +#192908 = LINE('',#192909,#192910); +#192909 = CARTESIAN_POINT('',(170.477857,-84.409597,1.585)); +#192910 = VECTOR('',#192911,1.); +#192911 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#192912 = PLANE('',#192913); +#192913 = AXIS2_PLACEMENT_3D('',#192914,#192915,#192916); +#192914 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192915 = DIRECTION('',(0.,0.,1.)); +#192916 = DIRECTION('',(1.,0.,-0.)); +#192917 = SHELL_BASED_SURFACE_MODEL('',(#192918)); +#192918 = OPEN_SHELL('',(#192919)); +#192919 = ADVANCED_FACE('',(#192920),#192964,.T.); +#192920 = FACE_BOUND('',#192921,.F.); +#192921 = EDGE_LOOP('',(#192922,#192933,#192941,#192950,#192958)); +#192922 = ORIENTED_EDGE('',*,*,#192923,.T.); +#192923 = EDGE_CURVE('',#192924,#192926,#192928,.T.); +#192924 = VERTEX_POINT('',#192925); +#192925 = CARTESIAN_POINT('',(148.306688,-84.453697,1.585)); +#192926 = VERTEX_POINT('',#192927); +#192927 = CARTESIAN_POINT('',(148.43174,-84.478571,1.585)); +#192928 = CIRCLE('',#192929,6.499988811647E-02); +#192929 = AXIS2_PLACEMENT_3D('',#192930,#192931,#192932); +#192930 = CARTESIAN_POINT('',(148.36674011188,-84.4785712701,1.585)); +#192931 = DIRECTION('',(0.,0.,-1.)); +#192932 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#192933 = ORIENTED_EDGE('',*,*,#192934,.T.); +#192934 = EDGE_CURVE('',#192926,#192935,#192937,.T.); +#192935 = VERTEX_POINT('',#192936); +#192936 = CARTESIAN_POINT('',(148.43174,-85.164285,1.585)); +#192937 = LINE('',#192938,#192939); +#192938 = CARTESIAN_POINT('',(148.43174,-84.478571,1.585)); +#192939 = VECTOR('',#192940,1.); +#192940 = DIRECTION('',(0.,-1.,0.)); +#192941 = ORIENTED_EDGE('',*,*,#192942,.T.); +#192942 = EDGE_CURVE('',#192935,#192943,#192945,.T.); +#192943 = VERTEX_POINT('',#192944); +#192944 = CARTESIAN_POINT('',(148.30174,-85.164285,1.585)); +#192945 = CIRCLE('',#192946,6.500000000092E-02); +#192946 = AXIS2_PLACEMENT_3D('',#192947,#192948,#192949); +#192947 = CARTESIAN_POINT('',(148.36674,-85.16428465513,1.585)); +#192948 = DIRECTION('',(-0.,0.,-1.)); +#192949 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#192950 = ORIENTED_EDGE('',*,*,#192951,.T.); +#192951 = EDGE_CURVE('',#192943,#192952,#192954,.T.); +#192952 = VERTEX_POINT('',#192953); +#192953 = CARTESIAN_POINT('',(148.30174,-84.478571,1.585)); +#192954 = LINE('',#192955,#192956); +#192955 = CARTESIAN_POINT('',(148.30174,-85.164285,1.585)); +#192956 = VECTOR('',#192957,1.); +#192957 = DIRECTION('',(0.,1.,0.)); +#192958 = ORIENTED_EDGE('',*,*,#192959,.T.); +#192959 = EDGE_CURVE('',#192952,#192924,#192960,.T.); +#192960 = LINE('',#192961,#192962); +#192961 = CARTESIAN_POINT('',(148.30174,-84.478571,1.585)); +#192962 = VECTOR('',#192963,1.); +#192963 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#192964 = PLANE('',#192965); +#192965 = AXIS2_PLACEMENT_3D('',#192966,#192967,#192968); +#192966 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192967 = DIRECTION('',(0.,0.,1.)); +#192968 = DIRECTION('',(1.,0.,-0.)); +#192969 = SHELL_BASED_SURFACE_MODEL('',(#192970)); +#192970 = OPEN_SHELL('',(#192971)); +#192971 = ADVANCED_FACE('',(#192972),#193008,.T.); +#192972 = FACE_BOUND('',#192973,.F.); +#192973 = EDGE_LOOP('',(#192974,#192985,#192993,#193002)); +#192974 = ORIENTED_EDGE('',*,*,#192975,.T.); +#192975 = EDGE_CURVE('',#192976,#192978,#192980,.T.); +#192976 = VERTEX_POINT('',#192977); +#192977 = CARTESIAN_POINT('',(202.812742,-85.0325,1.585)); +#192978 = VERTEX_POINT('',#192979); +#192979 = CARTESIAN_POINT('',(202.812742,-84.9125,1.585)); +#192980 = CIRCLE('',#192981,6.000000000042E-02); +#192981 = AXIS2_PLACEMENT_3D('',#192982,#192983,#192984); +#192982 = CARTESIAN_POINT('',(202.81274177441,-84.9725,1.585)); +#192983 = DIRECTION('',(0.,0.,-1.)); +#192984 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#192985 = ORIENTED_EDGE('',*,*,#192986,.T.); +#192986 = EDGE_CURVE('',#192978,#192987,#192989,.T.); +#192987 = VERTEX_POINT('',#192988); +#192988 = CARTESIAN_POINT('',(203.287258,-84.9125,1.585)); +#192989 = LINE('',#192990,#192991); +#192990 = CARTESIAN_POINT('',(202.812742,-84.9125,1.585)); +#192991 = VECTOR('',#192992,1.); +#192992 = DIRECTION('',(1.,0.,0.)); +#192993 = ORIENTED_EDGE('',*,*,#192994,.T.); +#192994 = EDGE_CURVE('',#192987,#192995,#192997,.T.); +#192995 = VERTEX_POINT('',#192996); +#192996 = CARTESIAN_POINT('',(203.287258,-85.0325,1.585)); +#192997 = CIRCLE('',#192998,6.000000000043E-02); +#192998 = AXIS2_PLACEMENT_3D('',#192999,#193000,#193001); +#192999 = CARTESIAN_POINT('',(203.28725822558,-84.9725,1.585)); +#193000 = DIRECTION('',(0.,0.,-1.)); +#193001 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#193002 = ORIENTED_EDGE('',*,*,#193003,.T.); +#193003 = EDGE_CURVE('',#192995,#192976,#193004,.T.); +#193004 = LINE('',#193005,#193006); +#193005 = CARTESIAN_POINT('',(203.287258,-85.0325,1.585)); +#193006 = VECTOR('',#193007,1.); +#193007 = DIRECTION('',(-1.,0.,0.)); +#193008 = PLANE('',#193009); +#193009 = AXIS2_PLACEMENT_3D('',#193010,#193011,#193012); +#193010 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193011 = DIRECTION('',(0.,0.,1.)); +#193012 = DIRECTION('',(1.,0.,-0.)); +#193013 = SHELL_BASED_SURFACE_MODEL('',(#193014)); +#193014 = OPEN_SHELL('',(#193015)); +#193015 = ADVANCED_FACE('',(#193016),#193102,.T.); +#193016 = FACE_BOUND('',#193017,.F.); +#193017 = EDGE_LOOP('',(#193018,#193029,#193037,#193046,#193054,#193063, + #193071,#193079,#193087,#193096)); +#193018 = ORIENTED_EDGE('',*,*,#193019,.T.); +#193019 = EDGE_CURVE('',#193020,#193022,#193024,.T.); +#193020 = VERTEX_POINT('',#193021); +#193021 = CARTESIAN_POINT('',(110.59665,-84.6681,1.585)); +#193022 = VERTEX_POINT('',#193023); +#193023 = CARTESIAN_POINT('',(110.65665,-84.6081,1.585)); +#193024 = CIRCLE('',#193025,5.999932016264E-02); +#193025 = AXIS2_PLACEMENT_3D('',#193026,#193027,#193028); +#193026 = CARTESIAN_POINT('',(110.65664932015,-84.66809932015,1.585)); +#193027 = DIRECTION('',(0.,0.,-1.)); +#193028 = DIRECTION('',(-0.999999999936,-1.133081517402E-05,-0.)); +#193029 = ORIENTED_EDGE('',*,*,#193030,.T.); +#193030 = EDGE_CURVE('',#193022,#193031,#193033,.T.); +#193031 = VERTEX_POINT('',#193032); +#193032 = CARTESIAN_POINT('',(114.77665,-84.6081,1.585)); +#193033 = LINE('',#193034,#193035); +#193034 = CARTESIAN_POINT('',(110.65665,-84.6081,1.585)); +#193035 = VECTOR('',#193036,1.); +#193036 = DIRECTION('',(1.,0.,0.)); +#193037 = ORIENTED_EDGE('',*,*,#193038,.T.); +#193038 = EDGE_CURVE('',#193031,#193039,#193041,.T.); +#193039 = VERTEX_POINT('',#193040); +#193040 = CARTESIAN_POINT('',(114.83665,-84.6681,1.585)); +#193041 = CIRCLE('',#193042,5.999932016264E-02); +#193042 = AXIS2_PLACEMENT_3D('',#193043,#193044,#193045); +#193043 = CARTESIAN_POINT('',(114.77665067984,-84.66809932015,1.585)); +#193044 = DIRECTION('',(0.,0.,-1.)); +#193045 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#193046 = ORIENTED_EDGE('',*,*,#193047,.T.); +#193047 = EDGE_CURVE('',#193039,#193048,#193050,.T.); +#193048 = VERTEX_POINT('',#193049); +#193049 = CARTESIAN_POINT('',(114.83665,-84.7631,1.585)); +#193050 = LINE('',#193051,#193052); +#193051 = CARTESIAN_POINT('',(114.83665,-84.6681,1.585)); +#193052 = VECTOR('',#193053,1.); +#193053 = DIRECTION('',(0.,-1.,0.)); +#193054 = ORIENTED_EDGE('',*,*,#193055,.T.); +#193055 = EDGE_CURVE('',#193048,#193056,#193058,.T.); +#193056 = VERTEX_POINT('',#193057); +#193057 = CARTESIAN_POINT('',(114.721217,-84.786061,1.585)); +#193058 = CIRCLE('',#193059,6.000007318648E-02); +#193059 = AXIS2_PLACEMENT_3D('',#193060,#193061,#193062); +#193060 = CARTESIAN_POINT('',(114.77664992681,-84.76310017668,1.585)); +#193061 = DIRECTION('',(0.,0.,-1.)); +#193062 = DIRECTION('',(0.999999999996,2.944769485282E-06,0.)); +#193063 = ORIENTED_EDGE('',*,*,#193064,.T.); +#193064 = EDGE_CURVE('',#193056,#193065,#193067,.T.); +#193065 = VERTEX_POINT('',#193066); +#193066 = CARTESIAN_POINT('',(114.71665,-84.7281,1.585)); +#193067 = LINE('',#193068,#193069); +#193068 = CARTESIAN_POINT('',(114.721217,-84.786061,1.585)); +#193069 = VECTOR('',#193070,1.); +#193070 = DIRECTION('',(-7.85508953971E-02,0.99691010469,0.)); +#193071 = ORIENTED_EDGE('',*,*,#193072,.T.); +#193072 = EDGE_CURVE('',#193065,#193073,#193075,.T.); +#193073 = VERTEX_POINT('',#193074); +#193074 = CARTESIAN_POINT('',(110.71665,-84.7281,1.585)); +#193075 = LINE('',#193076,#193077); +#193076 = CARTESIAN_POINT('',(114.71665,-84.7281,1.585)); +#193077 = VECTOR('',#193078,1.); +#193078 = DIRECTION('',(-1.,0.,0.)); +#193079 = ORIENTED_EDGE('',*,*,#193080,.T.); +#193080 = EDGE_CURVE('',#193073,#193081,#193083,.T.); +#193081 = VERTEX_POINT('',#193082); +#193082 = CARTESIAN_POINT('',(110.712083,-84.786061,1.585)); +#193083 = LINE('',#193084,#193085); +#193084 = CARTESIAN_POINT('',(110.71665,-84.7281,1.585)); +#193085 = VECTOR('',#193086,1.); +#193086 = DIRECTION('',(-7.85508953971E-02,-0.99691010469,0.)); +#193087 = ORIENTED_EDGE('',*,*,#193088,.T.); +#193088 = EDGE_CURVE('',#193081,#193089,#193091,.T.); +#193089 = VERTEX_POINT('',#193090); +#193090 = CARTESIAN_POINT('',(110.59665,-84.7631,1.585)); +#193091 = CIRCLE('',#193092,6.000007318648E-02); +#193092 = AXIS2_PLACEMENT_3D('',#193093,#193094,#193095); +#193093 = CARTESIAN_POINT('',(110.65665007318,-84.76310017668,1.585)); +#193094 = DIRECTION('',(-0.,0.,-1.)); +#193095 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#193096 = ORIENTED_EDGE('',*,*,#193097,.T.); +#193097 = EDGE_CURVE('',#193089,#193020,#193098,.T.); +#193098 = LINE('',#193099,#193100); +#193099 = CARTESIAN_POINT('',(110.59665,-84.7631,1.585)); +#193100 = VECTOR('',#193101,1.); +#193101 = DIRECTION('',(0.,1.,0.)); +#193102 = PLANE('',#193103); +#193103 = AXIS2_PLACEMENT_3D('',#193104,#193105,#193106); +#193104 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193105 = DIRECTION('',(0.,0.,1.)); +#193106 = DIRECTION('',(1.,0.,-0.)); +#193107 = SHELL_BASED_SURFACE_MODEL('',(#193108)); +#193108 = OPEN_SHELL('',(#193109)); +#193109 = ADVANCED_FACE('',(#193110),#193170,.T.); +#193110 = FACE_BOUND('',#193111,.F.); +#193111 = EDGE_LOOP('',(#193112,#193123,#193131,#193140,#193148,#193156, + #193164)); +#193112 = ORIENTED_EDGE('',*,*,#193113,.T.); +#193113 = EDGE_CURVE('',#193114,#193116,#193118,.T.); +#193114 = VERTEX_POINT('',#193115); +#193115 = CARTESIAN_POINT('',(109.828126,-84.46339,1.585)); +#193116 = VERTEX_POINT('',#193117); +#193117 = CARTESIAN_POINT('',(109.87665,-84.3681,1.585)); +#193118 = CIRCLE('',#193119,5.999941814204E-02); +#193119 = AXIS2_PLACEMENT_3D('',#193120,#193121,#193122); +#193120 = CARTESIAN_POINT('',(109.87664924194,-84.42809941813,1.585)); +#193121 = DIRECTION('',(0.,0.,-1.)); +#193122 = DIRECTION('',(-0.80872854189,-0.588182068353,-0.)); +#193123 = ORIENTED_EDGE('',*,*,#193124,.T.); +#193124 = EDGE_CURVE('',#193116,#193125,#193127,.T.); +#193125 = VERTEX_POINT('',#193126); +#193126 = CARTESIAN_POINT('',(110.35665,-84.3681,1.585)); +#193127 = LINE('',#193128,#193129); +#193128 = CARTESIAN_POINT('',(109.87665,-84.3681,1.585)); +#193129 = VECTOR('',#193130,1.); +#193130 = DIRECTION('',(1.,0.,0.)); +#193131 = ORIENTED_EDGE('',*,*,#193132,.T.); +#193132 = EDGE_CURVE('',#193125,#193133,#193135,.T.); +#193133 = VERTEX_POINT('',#193134); +#193134 = CARTESIAN_POINT('',(110.405174,-84.46339,1.585)); +#193135 = CIRCLE('',#193136,6.000027696175E-02); +#193136 = AXIS2_PLACEMENT_3D('',#193137,#193138,#193139); +#193137 = CARTESIAN_POINT('',(110.35664907153,-84.42810027695,1.585)); +#193138 = DIRECTION('',(0.,0.,-1.)); +#193139 = DIRECTION('',(1.547440182805E-05,0.99999999988,0.)); +#193140 = ORIENTED_EDGE('',*,*,#193141,.T.); +#193141 = EDGE_CURVE('',#193133,#193142,#193144,.T.); +#193142 = VERTEX_POINT('',#193143); +#193143 = CARTESIAN_POINT('',(110.165174,-84.79339,1.585)); +#193144 = LINE('',#193145,#193146); +#193145 = CARTESIAN_POINT('',(110.405174,-84.46339,1.585)); +#193146 = VECTOR('',#193147,1.); +#193147 = DIRECTION('',(-0.588171697675,-0.808736084303,0.)); +#193148 = ORIENTED_EDGE('',*,*,#193149,.T.); +#193149 = EDGE_CURVE('',#193142,#193150,#193152,.T.); +#193150 = VERTEX_POINT('',#193151); +#193151 = CARTESIAN_POINT('',(110.126008,-84.817366,1.585)); +#193152 = LINE('',#193153,#193154); +#193153 = CARTESIAN_POINT('',(110.165174,-84.79339,1.585)); +#193154 = VECTOR('',#193155,1.); +#193155 = DIRECTION('',(-0.852882175679,-0.522103432673,0.)); +#193156 = ORIENTED_EDGE('',*,*,#193157,.T.); +#193157 = EDGE_CURVE('',#193150,#193158,#193160,.T.); +#193158 = VERTEX_POINT('',#193159); +#193159 = CARTESIAN_POINT('',(110.08136,-84.806624,1.585)); +#193160 = LINE('',#193161,#193162); +#193161 = CARTESIAN_POINT('',(110.126008,-84.817366,1.585)); +#193162 = VECTOR('',#193163,1.); +#193163 = DIRECTION('',(-0.972256295266,0.233918140202,0.)); +#193164 = ORIENTED_EDGE('',*,*,#193165,.T.); +#193165 = EDGE_CURVE('',#193158,#193114,#193166,.T.); +#193166 = LINE('',#193167,#193168); +#193167 = CARTESIAN_POINT('',(110.08136,-84.806624,1.585)); +#193168 = VECTOR('',#193169,1.); +#193169 = DIRECTION('',(-0.593692353743,0.804692108267,0.)); +#193170 = PLANE('',#193171); +#193171 = AXIS2_PLACEMENT_3D('',#193172,#193173,#193174); +#193172 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193173 = DIRECTION('',(0.,0.,1.)); +#193174 = DIRECTION('',(1.,0.,-0.)); +#193175 = SHELL_BASED_SURFACE_MODEL('',(#193176)); +#193176 = OPEN_SHELL('',(#193177)); +#193177 = ADVANCED_FACE('',(#193178),#193214,.T.); +#193178 = FACE_BOUND('',#193179,.F.); +#193179 = EDGE_LOOP('',(#193180,#193191,#193199,#193208)); +#193180 = ORIENTED_EDGE('',*,*,#193181,.T.); +#193181 = EDGE_CURVE('',#193182,#193184,#193186,.T.); +#193182 = VERTEX_POINT('',#193183); +#193183 = CARTESIAN_POINT('',(185.04894,-84.4667,1.585)); +#193184 = VERTEX_POINT('',#193185); +#193185 = CARTESIAN_POINT('',(185.04894,-84.250928,1.585)); +#193186 = CIRCLE('',#193187,0.109999639072); +#193187 = AXIS2_PLACEMENT_3D('',#193188,#193189,#193190); +#193188 = CARTESIAN_POINT('',(185.0704,-84.358814,1.585)); +#193189 = DIRECTION('',(0.,0.,-1.)); +#193190 = DIRECTION('',(-0.195091549218,-0.980785036297,-0.)); +#193191 = ORIENTED_EDGE('',*,*,#193192,.T.); +#193192 = EDGE_CURVE('',#193184,#193193,#193195,.T.); +#193193 = VERTEX_POINT('',#193194); +#193194 = CARTESIAN_POINT('',(186.69186,-84.250928,1.585)); +#193195 = LINE('',#193196,#193197); +#193196 = CARTESIAN_POINT('',(185.04894,-84.250928,1.585)); +#193197 = VECTOR('',#193198,1.); +#193198 = DIRECTION('',(1.,0.,0.)); +#193199 = ORIENTED_EDGE('',*,*,#193200,.T.); +#193200 = EDGE_CURVE('',#193193,#193201,#193203,.T.); +#193201 = VERTEX_POINT('',#193202); +#193202 = CARTESIAN_POINT('',(186.69186,-84.4667,1.585)); +#193203 = CIRCLE('',#193204,0.109999639072); +#193204 = AXIS2_PLACEMENT_3D('',#193205,#193206,#193207); +#193205 = CARTESIAN_POINT('',(186.6704,-84.358814,1.585)); +#193206 = DIRECTION('',(0.,0.,-1.)); +#193207 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#193208 = ORIENTED_EDGE('',*,*,#193209,.T.); +#193209 = EDGE_CURVE('',#193201,#193182,#193210,.T.); +#193210 = LINE('',#193211,#193212); +#193211 = CARTESIAN_POINT('',(186.69186,-84.4667,1.585)); +#193212 = VECTOR('',#193213,1.); +#193213 = DIRECTION('',(-1.,0.,0.)); +#193214 = PLANE('',#193215); +#193215 = AXIS2_PLACEMENT_3D('',#193216,#193217,#193218); +#193216 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193217 = DIRECTION('',(0.,0.,1.)); +#193218 = DIRECTION('',(1.,0.,-0.)); +#193219 = SHELL_BASED_SURFACE_MODEL('',(#193220)); +#193220 = OPEN_SHELL('',(#193221)); +#193221 = ADVANCED_FACE('',(#193222,#193410),#193544,.T.); +#193222 = FACE_BOUND('',#193223,.F.); +#193223 = EDGE_LOOP('',(#193224,#193235,#193243,#193251,#193259,#193267, + #193275,#193283,#193291,#193299,#193307,#193316,#193324,#193332, + #193340,#193348,#193356,#193364,#193372,#193380,#193388,#193396, + #193404)); +#193224 = ORIENTED_EDGE('',*,*,#193225,.T.); +#193225 = EDGE_CURVE('',#193226,#193228,#193230,.T.); +#193226 = VERTEX_POINT('',#193227); +#193227 = CARTESIAN_POINT('',(112.010147,-83.267418,1.585)); +#193228 = VERTEX_POINT('',#193229); +#193229 = CARTESIAN_POINT('',(112.478218,-83.272786,1.585)); +#193230 = CIRCLE('',#193231,0.397578964435); +#193231 = AXIS2_PLACEMENT_3D('',#193232,#193233,#193234); +#193232 = CARTESIAN_POINT('',(112.24049697212,-83.59146726061,1.585)); +#193233 = DIRECTION('',(0.,0.,-1.)); +#193234 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#193235 = ORIENTED_EDGE('',*,*,#193236,.T.); +#193236 = EDGE_CURVE('',#193228,#193237,#193239,.T.); +#193237 = VERTEX_POINT('',#193238); +#193238 = CARTESIAN_POINT('',(112.588534,-83.384108,1.585)); +#193239 = LINE('',#193240,#193241); +#193240 = CARTESIAN_POINT('',(112.478218,-83.272786,1.585)); +#193241 = VECTOR('',#193242,1.); +#193242 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#193243 = ORIENTED_EDGE('',*,*,#193244,.T.); +#193244 = EDGE_CURVE('',#193237,#193245,#193247,.T.); +#193245 = VERTEX_POINT('',#193246); +#193246 = CARTESIAN_POINT('',(112.598934,-83.407586,1.585)); +#193247 = LINE('',#193248,#193249); +#193248 = CARTESIAN_POINT('',(112.588534,-83.384108,1.585)); +#193249 = VECTOR('',#193250,1.); +#193250 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#193251 = ORIENTED_EDGE('',*,*,#193252,.T.); +#193252 = EDGE_CURVE('',#193245,#193253,#193255,.T.); +#193253 = VERTEX_POINT('',#193254); +#193254 = CARTESIAN_POINT('',(112.648792,-83.616252,1.585)); +#193255 = LINE('',#193256,#193257); +#193256 = CARTESIAN_POINT('',(112.598934,-83.407586,1.585)); +#193257 = VECTOR('',#193258,1.); +#193258 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#193259 = ORIENTED_EDGE('',*,*,#193260,.T.); +#193260 = EDGE_CURVE('',#193253,#193261,#193263,.T.); +#193261 = VERTEX_POINT('',#193262); +#193262 = CARTESIAN_POINT('',(112.646553,-83.967775,1.585)); +#193263 = LINE('',#193264,#193265); +#193264 = CARTESIAN_POINT('',(112.648792,-83.616252,1.585)); +#193265 = VECTOR('',#193266,1.); +#193266 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#193267 = ORIENTED_EDGE('',*,*,#193268,.T.); +#193268 = EDGE_CURVE('',#193261,#193269,#193271,.T.); +#193269 = VERTEX_POINT('',#193270); +#193270 = CARTESIAN_POINT('',(112.593987,-84.172097,1.585)); +#193271 = LINE('',#193272,#193273); +#193272 = CARTESIAN_POINT('',(112.646553,-83.967775,1.585)); +#193273 = VECTOR('',#193274,1.); +#193274 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#193275 = ORIENTED_EDGE('',*,*,#193276,.T.); +#193276 = EDGE_CURVE('',#193269,#193277,#193279,.T.); +#193277 = VERTEX_POINT('',#193278); +#193278 = CARTESIAN_POINT('',(112.579207,-84.193093,1.585)); +#193279 = LINE('',#193280,#193281); +#193280 = CARTESIAN_POINT('',(112.593987,-84.172097,1.585)); +#193281 = VECTOR('',#193282,1.); +#193282 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#193283 = ORIENTED_EDGE('',*,*,#193284,.T.); +#193284 = EDGE_CURVE('',#193277,#193285,#193287,.T.); +#193285 = VERTEX_POINT('',#193286); +#193286 = CARTESIAN_POINT('',(112.537,-84.235299,1.585)); +#193287 = LINE('',#193288,#193289); +#193288 = CARTESIAN_POINT('',(112.579207,-84.193093,1.585)); +#193289 = VECTOR('',#193290,1.); +#193290 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#193291 = ORIENTED_EDGE('',*,*,#193292,.T.); +#193292 = EDGE_CURVE('',#193285,#193293,#193295,.T.); +#193293 = VERTEX_POINT('',#193294); +#193294 = CARTESIAN_POINT('',(112.5706,-84.268899,1.585)); +#193295 = LINE('',#193296,#193297); +#193296 = CARTESIAN_POINT('',(112.537,-84.235299,1.585)); +#193297 = VECTOR('',#193298,1.); +#193298 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#193299 = ORIENTED_EDGE('',*,*,#193300,.T.); +#193300 = EDGE_CURVE('',#193293,#193301,#193303,.T.); +#193301 = VERTEX_POINT('',#193302); +#193302 = CARTESIAN_POINT('',(112.667395,-84.318907,1.585)); +#193303 = LINE('',#193304,#193305); +#193304 = CARTESIAN_POINT('',(112.5706,-84.268899,1.585)); +#193305 = VECTOR('',#193306,1.); +#193306 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#193307 = ORIENTED_EDGE('',*,*,#193308,.T.); +#193308 = EDGE_CURVE('',#193301,#193309,#193311,.T.); +#193309 = VERTEX_POINT('',#193310); +#193310 = CARTESIAN_POINT('',(112.58787,-84.445239,1.585)); +#193311 = CIRCLE('',#193312,7.500029440362E-02); +#193312 = AXIS2_PLACEMENT_3D('',#193313,#193314,#193315); +#193313 = CARTESIAN_POINT('',(112.62141105397,-84.37815664867,1.585)); +#193314 = DIRECTION('',(0.,0.,-1.)); +#193315 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#193316 = ORIENTED_EDGE('',*,*,#193317,.T.); +#193317 = EDGE_CURVE('',#193309,#193318,#193320,.T.); +#193318 = VERTEX_POINT('',#193319); +#193319 = CARTESIAN_POINT('',(112.47889,-84.388291,1.585)); +#193320 = LINE('',#193321,#193322); +#193321 = CARTESIAN_POINT('',(112.58787,-84.445239,1.585)); +#193322 = VECTOR('',#193323,1.); +#193323 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#193324 = ORIENTED_EDGE('',*,*,#193325,.T.); +#193325 = EDGE_CURVE('',#193318,#193326,#193328,.T.); +#193326 = VERTEX_POINT('',#193327); +#193327 = CARTESIAN_POINT('',(112.416126,-84.326557,1.585)); +#193328 = LINE('',#193329,#193330); +#193329 = CARTESIAN_POINT('',(112.47889,-84.388291,1.585)); +#193330 = VECTOR('',#193331,1.); +#193331 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#193332 = ORIENTED_EDGE('',*,*,#193333,.T.); +#193333 = EDGE_CURVE('',#193326,#193334,#193336,.T.); +#193334 = VERTEX_POINT('',#193335); +#193335 = CARTESIAN_POINT('',(112.350329,-84.356478,1.585)); +#193336 = LINE('',#193337,#193338); +#193337 = CARTESIAN_POINT('',(112.416126,-84.326557,1.585)); +#193338 = VECTOR('',#193339,1.); +#193339 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#193340 = ORIENTED_EDGE('',*,*,#193341,.T.); +#193341 = EDGE_CURVE('',#193334,#193342,#193344,.T.); +#193342 = VERTEX_POINT('',#193343); +#193343 = CARTESIAN_POINT('',(112.125411,-84.355256,1.585)); +#193344 = LINE('',#193345,#193346); +#193345 = CARTESIAN_POINT('',(112.350329,-84.356478,1.585)); +#193346 = VECTOR('',#193347,1.); +#193347 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#193348 = ORIENTED_EDGE('',*,*,#193349,.T.); +#193349 = EDGE_CURVE('',#193342,#193350,#193352,.T.); +#193350 = VERTEX_POINT('',#193351); +#193351 = CARTESIAN_POINT('',(112.0027,-84.293053,1.585)); +#193352 = LINE('',#193353,#193354); +#193353 = CARTESIAN_POINT('',(112.125411,-84.355256,1.585)); +#193354 = VECTOR('',#193355,1.); +#193355 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#193356 = ORIENTED_EDGE('',*,*,#193357,.T.); +#193357 = EDGE_CURVE('',#193350,#193358,#193360,.T.); +#193358 = VERTEX_POINT('',#193359); +#193359 = CARTESIAN_POINT('',(111.892384,-84.181728,1.585)); +#193360 = LINE('',#193361,#193362); +#193361 = CARTESIAN_POINT('',(112.0027,-84.293053,1.585)); +#193362 = VECTOR('',#193363,1.); +#193363 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#193364 = ORIENTED_EDGE('',*,*,#193365,.T.); +#193365 = EDGE_CURVE('',#193358,#193366,#193368,.T.); +#193366 = VERTEX_POINT('',#193367); +#193367 = CARTESIAN_POINT('',(111.881984,-84.158251,1.585)); +#193368 = LINE('',#193369,#193370); +#193369 = CARTESIAN_POINT('',(111.892384,-84.181728,1.585)); +#193370 = VECTOR('',#193371,1.); +#193371 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#193372 = ORIENTED_EDGE('',*,*,#193373,.T.); +#193373 = EDGE_CURVE('',#193366,#193374,#193376,.T.); +#193374 = VERTEX_POINT('',#193375); +#193375 = CARTESIAN_POINT('',(111.832126,-83.949585,1.585)); +#193376 = LINE('',#193377,#193378); +#193377 = CARTESIAN_POINT('',(111.881984,-84.158251,1.585)); +#193378 = VECTOR('',#193379,1.); +#193379 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#193380 = ORIENTED_EDGE('',*,*,#193381,.T.); +#193381 = EDGE_CURVE('',#193374,#193382,#193384,.T.); +#193382 = VERTEX_POINT('',#193383); +#193383 = CARTESIAN_POINT('',(111.834365,-83.598062,1.585)); +#193384 = LINE('',#193385,#193386); +#193385 = CARTESIAN_POINT('',(111.832126,-83.949585,1.585)); +#193386 = VECTOR('',#193387,1.); +#193387 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#193388 = ORIENTED_EDGE('',*,*,#193389,.T.); +#193389 = EDGE_CURVE('',#193382,#193390,#193392,.T.); +#193390 = VERTEX_POINT('',#193391); +#193391 = CARTESIAN_POINT('',(111.886931,-83.39374,1.585)); +#193392 = LINE('',#193393,#193394); +#193393 = CARTESIAN_POINT('',(111.834365,-83.598062,1.585)); +#193394 = VECTOR('',#193395,1.); +#193395 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#193396 = ORIENTED_EDGE('',*,*,#193397,.T.); +#193397 = EDGE_CURVE('',#193390,#193398,#193400,.T.); +#193398 = VERTEX_POINT('',#193399); +#193399 = CARTESIAN_POINT('',(111.901712,-83.372743,1.585)); +#193400 = LINE('',#193401,#193402); +#193401 = CARTESIAN_POINT('',(111.886931,-83.39374,1.585)); +#193402 = VECTOR('',#193403,1.); +#193403 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#193404 = ORIENTED_EDGE('',*,*,#193405,.T.); +#193405 = EDGE_CURVE('',#193398,#193226,#193406,.T.); +#193406 = LINE('',#193407,#193408); +#193407 = CARTESIAN_POINT('',(111.901712,-83.372743,1.585)); +#193408 = VECTOR('',#193409,1.); +#193409 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#193410 = FACE_BOUND('',#193411,.F.); +#193411 = EDGE_LOOP('',(#193412,#193423,#193431,#193440,#193448,#193456, + #193464,#193472,#193480,#193488,#193497,#193505,#193513,#193521, + #193529,#193538)); +#193412 = ORIENTED_EDGE('',*,*,#193413,.T.); +#193413 = EDGE_CURVE('',#193414,#193416,#193418,.T.); +#193414 = VERTEX_POINT('',#193415); +#193415 = CARTESIAN_POINT('',(112.386508,-83.392177,1.585)); +#193416 = VERTEX_POINT('',#193417); +#193417 = CARTESIAN_POINT('',(112.09441,-83.392177,1.585)); +#193418 = CIRCLE('',#193419,0.252889603602); +#193419 = AXIS2_PLACEMENT_3D('',#193420,#193421,#193422); +#193420 = CARTESIAN_POINT('',(112.240459,-83.59863,1.585)); +#193421 = DIRECTION('',(0.,0.,1.)); +#193422 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#193423 = ORIENTED_EDGE('',*,*,#193424,.T.); +#193424 = EDGE_CURVE('',#193416,#193425,#193427,.T.); +#193425 = VERTEX_POINT('',#193426); +#193426 = CARTESIAN_POINT('',(112.022467,-83.464119,1.585)); +#193427 = LINE('',#193428,#193429); +#193428 = CARTESIAN_POINT('',(112.09441,-83.392177,1.585)); +#193429 = VECTOR('',#193430,1.); +#193430 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#193431 = ORIENTED_EDGE('',*,*,#193432,.T.); +#193432 = EDGE_CURVE('',#193425,#193433,#193435,.T.); +#193433 = VERTEX_POINT('',#193434); +#193434 = CARTESIAN_POINT('',(112.022467,-84.101717,1.585)); +#193435 = CIRCLE('',#193436,0.985308713638); +#193436 = AXIS2_PLACEMENT_3D('',#193437,#193438,#193439); +#193437 = CARTESIAN_POINT('',(112.9547762077,-83.782918,1.585)); +#193438 = DIRECTION('',(0.,0.,1.)); +#193439 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#193440 = ORIENTED_EDGE('',*,*,#193441,.T.); +#193441 = EDGE_CURVE('',#193433,#193442,#193444,.T.); +#193442 = VERTEX_POINT('',#193443); +#193443 = CARTESIAN_POINT('',(112.09441,-84.173661,1.585)); +#193444 = LINE('',#193445,#193446); +#193445 = CARTESIAN_POINT('',(112.022467,-84.101717,1.585)); +#193446 = VECTOR('',#193447,1.); +#193447 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#193448 = ORIENTED_EDGE('',*,*,#193449,.T.); +#193449 = EDGE_CURVE('',#193442,#193450,#193452,.T.); +#193450 = VERTEX_POINT('',#193451); +#193451 = CARTESIAN_POINT('',(112.162926,-84.207919,1.585)); +#193452 = LINE('',#193453,#193454); +#193453 = CARTESIAN_POINT('',(112.09441,-84.173661,1.585)); +#193454 = VECTOR('',#193455,1.); +#193455 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#193456 = ORIENTED_EDGE('',*,*,#193457,.T.); +#193457 = EDGE_CURVE('',#193450,#193458,#193460,.T.); +#193458 = VERTEX_POINT('',#193459); +#193459 = CARTESIAN_POINT('',(112.297489,-84.207919,1.585)); +#193460 = LINE('',#193461,#193462); +#193461 = CARTESIAN_POINT('',(112.162926,-84.207919,1.585)); +#193462 = VECTOR('',#193463,1.); +#193463 = DIRECTION('',(1.,0.,0.)); +#193464 = ORIENTED_EDGE('',*,*,#193465,.T.); +#193465 = EDGE_CURVE('',#193458,#193466,#193468,.T.); +#193466 = VERTEX_POINT('',#193467); +#193467 = CARTESIAN_POINT('',(112.24365,-84.15408,1.585)); +#193468 = LINE('',#193469,#193470); +#193469 = CARTESIAN_POINT('',(112.297489,-84.207919,1.585)); +#193470 = VECTOR('',#193471,1.); +#193471 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#193472 = ORIENTED_EDGE('',*,*,#193473,.T.); +#193473 = EDGE_CURVE('',#193466,#193474,#193476,.T.); +#193474 = VERTEX_POINT('',#193475); +#193475 = CARTESIAN_POINT('',(112.175135,-84.119823,1.585)); +#193476 = LINE('',#193477,#193478); +#193477 = CARTESIAN_POINT('',(112.24365,-84.15408,1.585)); +#193478 = VECTOR('',#193479,1.); +#193479 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#193480 = ORIENTED_EDGE('',*,*,#193481,.T.); +#193481 = EDGE_CURVE('',#193474,#193482,#193484,.T.); +#193482 = VERTEX_POINT('',#193483); +#193483 = CARTESIAN_POINT('',(112.08297,-84.118382,1.585)); +#193484 = LINE('',#193485,#193486); +#193485 = CARTESIAN_POINT('',(112.175135,-84.119823,1.585)); +#193486 = VECTOR('',#193487,1.); +#193487 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#193488 = ORIENTED_EDGE('',*,*,#193489,.T.); +#193489 = EDGE_CURVE('',#193482,#193490,#193492,.T.); +#193490 = VERTEX_POINT('',#193491); +#193491 = CARTESIAN_POINT('',(112.097602,-83.969823,1.585)); +#193492 = CIRCLE('',#193493,7.500006711464E-02); +#193493 = AXIS2_PLACEMENT_3D('',#193494,#193495,#193496); +#193494 = CARTESIAN_POINT('',(112.09760193288,-84.04482306711,1.585)); +#193495 = DIRECTION('',(0.,0.,-1.)); +#193496 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#193497 = ORIENTED_EDGE('',*,*,#193498,.T.); +#193498 = EDGE_CURVE('',#193490,#193499,#193501,.T.); +#193499 = VERTEX_POINT('',#193500); +#193500 = CARTESIAN_POINT('',(112.212649,-83.972486,1.585)); +#193501 = LINE('',#193502,#193503); +#193502 = CARTESIAN_POINT('',(112.097602,-83.969823,1.585)); +#193503 = VECTOR('',#193504,1.); +#193504 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#193505 = ORIENTED_EDGE('',*,*,#193506,.T.); +#193506 = EDGE_CURVE('',#193499,#193507,#193509,.T.); +#193507 = VERTEX_POINT('',#193508); +#193508 = CARTESIAN_POINT('',(112.335361,-84.03469,1.585)); +#193509 = LINE('',#193510,#193511); +#193510 = CARTESIAN_POINT('',(112.212649,-83.972486,1.585)); +#193511 = VECTOR('',#193512,1.); +#193512 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#193513 = ORIENTED_EDGE('',*,*,#193514,.T.); +#193514 = EDGE_CURVE('',#193507,#193515,#193517,.T.); +#193515 = VERTEX_POINT('',#193516); +#193516 = CARTESIAN_POINT('',(112.430934,-84.129233,1.585)); +#193517 = LINE('',#193518,#193519); +#193518 = CARTESIAN_POINT('',(112.335361,-84.03469,1.585)); +#193519 = VECTOR('',#193520,1.); +#193520 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#193521 = ORIENTED_EDGE('',*,*,#193522,.T.); +#193522 = EDGE_CURVE('',#193515,#193523,#193525,.T.); +#193523 = VERTEX_POINT('',#193524); +#193524 = CARTESIAN_POINT('',(112.45845,-84.101717,1.585)); +#193525 = LINE('',#193526,#193527); +#193526 = CARTESIAN_POINT('',(112.430934,-84.129233,1.585)); +#193527 = VECTOR('',#193528,1.); +#193528 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#193529 = ORIENTED_EDGE('',*,*,#193530,.T.); +#193530 = EDGE_CURVE('',#193523,#193531,#193533,.T.); +#193531 = VERTEX_POINT('',#193532); +#193532 = CARTESIAN_POINT('',(112.45845,-83.464119,1.585)); +#193533 = CIRCLE('',#193534,0.985282207896); +#193534 = AXIS2_PLACEMENT_3D('',#193535,#193536,#193537); +#193535 = CARTESIAN_POINT('',(111.52616880486,-83.782918,1.585)); +#193536 = DIRECTION('',(0.,-0.,1.)); +#193537 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#193538 = ORIENTED_EDGE('',*,*,#193539,.T.); +#193539 = EDGE_CURVE('',#193531,#193414,#193540,.T.); +#193540 = LINE('',#193541,#193542); +#193541 = CARTESIAN_POINT('',(112.45845,-83.464119,1.585)); +#193542 = VECTOR('',#193543,1.); +#193543 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193544 = PLANE('',#193545); +#193545 = AXIS2_PLACEMENT_3D('',#193546,#193547,#193548); +#193546 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193547 = DIRECTION('',(0.,0.,1.)); +#193548 = DIRECTION('',(1.,0.,-0.)); +#193549 = SHELL_BASED_SURFACE_MODEL('',(#193550)); +#193550 = OPEN_SHELL('',(#193551)); +#193551 = ADVANCED_FACE('',(#193552),#193661,.T.); +#193552 = FACE_BOUND('',#193553,.F.); +#193553 = EDGE_LOOP('',(#193554,#193565,#193573,#193582,#193590,#193598, + #193606,#193614,#193622,#193630,#193638,#193646,#193655)); +#193554 = ORIENTED_EDGE('',*,*,#193555,.T.); +#193555 = EDGE_CURVE('',#193556,#193558,#193560,.T.); +#193556 = VERTEX_POINT('',#193557); +#193557 = CARTESIAN_POINT('',(92.77165,-82.3231,1.585)); +#193558 = VERTEX_POINT('',#193559); +#193559 = CARTESIAN_POINT('',(92.83165,-82.2631,1.585)); +#193560 = CIRCLE('',#193561,5.999932016264E-02); +#193561 = AXIS2_PLACEMENT_3D('',#193562,#193563,#193564); +#193562 = CARTESIAN_POINT('',(92.831649320159,-82.32309932015,1.585)); +#193563 = DIRECTION('',(0.,0.,-1.)); +#193564 = DIRECTION('',(-0.999999999936,-1.133081517402E-05,-0.)); +#193565 = ORIENTED_EDGE('',*,*,#193566,.T.); +#193566 = EDGE_CURVE('',#193558,#193567,#193569,.T.); +#193567 = VERTEX_POINT('',#193568); +#193568 = CARTESIAN_POINT('',(96.84165,-82.2631,1.585)); +#193569 = LINE('',#193570,#193571); +#193570 = CARTESIAN_POINT('',(92.83165,-82.2631,1.585)); +#193571 = VECTOR('',#193572,1.); +#193572 = DIRECTION('',(1.,0.,0.)); +#193573 = ORIENTED_EDGE('',*,*,#193574,.T.); +#193574 = EDGE_CURVE('',#193567,#193575,#193577,.T.); +#193575 = VERTEX_POINT('',#193576); +#193576 = CARTESIAN_POINT('',(96.84165,-82.3831,1.585)); +#193577 = CIRCLE('',#193578,6.000000000043E-02); +#193578 = AXIS2_PLACEMENT_3D('',#193579,#193580,#193581); +#193579 = CARTESIAN_POINT('',(96.841650225588,-82.3231,1.585)); +#193580 = DIRECTION('',(0.,0.,-1.)); +#193581 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#193582 = ORIENTED_EDGE('',*,*,#193583,.T.); +#193583 = EDGE_CURVE('',#193575,#193584,#193586,.T.); +#193584 = VERTEX_POINT('',#193585); +#193585 = CARTESIAN_POINT('',(92.89165,-82.3831,1.585)); +#193586 = LINE('',#193587,#193588); +#193587 = CARTESIAN_POINT('',(96.84165,-82.3831,1.585)); +#193588 = VECTOR('',#193589,1.); +#193589 = DIRECTION('',(-1.,0.,0.)); +#193590 = ORIENTED_EDGE('',*,*,#193591,.T.); +#193591 = EDGE_CURVE('',#193584,#193592,#193594,.T.); +#193592 = VERTEX_POINT('',#193593); +#193593 = CARTESIAN_POINT('',(92.89165,-84.2631,1.585)); +#193594 = LINE('',#193595,#193596); +#193595 = CARTESIAN_POINT('',(92.89165,-82.3831,1.585)); +#193596 = VECTOR('',#193597,1.); +#193597 = DIRECTION('',(0.,-1.,0.)); +#193598 = ORIENTED_EDGE('',*,*,#193599,.T.); +#193599 = EDGE_CURVE('',#193592,#193600,#193602,.T.); +#193600 = VERTEX_POINT('',#193601); +#193601 = CARTESIAN_POINT('',(94.099081,-84.2631,1.585)); +#193602 = LINE('',#193603,#193604); +#193603 = CARTESIAN_POINT('',(92.89165,-84.2631,1.585)); +#193604 = VECTOR('',#193605,1.); +#193605 = DIRECTION('',(1.,0.,0.)); +#193606 = ORIENTED_EDGE('',*,*,#193607,.T.); +#193607 = EDGE_CURVE('',#193600,#193608,#193610,.T.); +#193608 = VERTEX_POINT('',#193609); +#193609 = CARTESIAN_POINT('',(94.065814,-84.27688,1.585)); +#193610 = LINE('',#193611,#193612); +#193611 = CARTESIAN_POINT('',(94.099081,-84.2631,1.585)); +#193612 = VECTOR('',#193613,1.); +#193613 = DIRECTION('',(-0.923876023059,-0.382691904823,0.)); +#193614 = ORIENTED_EDGE('',*,*,#193615,.T.); +#193615 = EDGE_CURVE('',#193608,#193616,#193618,.T.); +#193616 = VERTEX_POINT('',#193617); +#193617 = CARTESIAN_POINT('',(94.02443,-84.318264,1.585)); +#193618 = LINE('',#193619,#193620); +#193619 = CARTESIAN_POINT('',(94.065814,-84.27688,1.585)); +#193620 = VECTOR('',#193621,1.); +#193621 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#193622 = ORIENTED_EDGE('',*,*,#193623,.T.); +#193623 = EDGE_CURVE('',#193616,#193624,#193626,.T.); +#193624 = VERTEX_POINT('',#193625); +#193625 = CARTESIAN_POINT('',(94.002032,-84.372336,1.585)); +#193626 = LINE('',#193627,#193628); +#193627 = CARTESIAN_POINT('',(94.02443,-84.318264,1.585)); +#193628 = VECTOR('',#193629,1.); +#193629 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193630 = ORIENTED_EDGE('',*,*,#193631,.T.); +#193631 = EDGE_CURVE('',#193624,#193632,#193634,.T.); +#193632 = VERTEX_POINT('',#193633); +#193633 = CARTESIAN_POINT('',(94.002032,-84.3831,1.585)); +#193634 = LINE('',#193635,#193636); +#193635 = CARTESIAN_POINT('',(94.002032,-84.372336,1.585)); +#193636 = VECTOR('',#193637,1.); +#193637 = DIRECTION('',(0.,-1.,0.)); +#193638 = ORIENTED_EDGE('',*,*,#193639,.T.); +#193639 = EDGE_CURVE('',#193632,#193640,#193642,.T.); +#193640 = VERTEX_POINT('',#193641); +#193641 = CARTESIAN_POINT('',(92.83165,-84.3831,1.585)); +#193642 = LINE('',#193643,#193644); +#193643 = CARTESIAN_POINT('',(94.002032,-84.3831,1.585)); +#193644 = VECTOR('',#193645,1.); +#193645 = DIRECTION('',(-1.,0.,0.)); +#193646 = ORIENTED_EDGE('',*,*,#193647,.T.); +#193647 = EDGE_CURVE('',#193640,#193648,#193650,.T.); +#193648 = VERTEX_POINT('',#193649); +#193649 = CARTESIAN_POINT('',(92.77165,-84.3231,1.585)); +#193650 = CIRCLE('',#193651,5.999932016259E-02); +#193651 = AXIS2_PLACEMENT_3D('',#193652,#193653,#193654); +#193652 = CARTESIAN_POINT('',(92.831649320159,-84.32310067984,1.585)); +#193653 = DIRECTION('',(0.,0.,-1.)); +#193654 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#193655 = ORIENTED_EDGE('',*,*,#193656,.T.); +#193656 = EDGE_CURVE('',#193648,#193556,#193657,.T.); +#193657 = LINE('',#193658,#193659); +#193658 = CARTESIAN_POINT('',(92.77165,-84.3231,1.585)); +#193659 = VECTOR('',#193660,1.); +#193660 = DIRECTION('',(0.,1.,0.)); +#193661 = PLANE('',#193662); +#193662 = AXIS2_PLACEMENT_3D('',#193663,#193664,#193665); +#193663 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193664 = DIRECTION('',(0.,0.,1.)); +#193665 = DIRECTION('',(1.,0.,-0.)); +#193666 = SHELL_BASED_SURFACE_MODEL('',(#193667)); +#193667 = OPEN_SHELL('',(#193668)); +#193668 = ADVANCED_FACE('',(#193669),#193728,.T.); +#193669 = FACE_BOUND('',#193670,.F.); +#193670 = EDGE_LOOP('',(#193671,#193681,#193689,#193698,#193706,#193714, + #193722)); +#193671 = ORIENTED_EDGE('',*,*,#193672,.T.); +#193672 = EDGE_CURVE('',#193673,#193675,#193677,.T.); +#193673 = VERTEX_POINT('',#193674); +#193674 = CARTESIAN_POINT('',(94.232486,-84.27688,1.585)); +#193675 = VERTEX_POINT('',#193676); +#193676 = CARTESIAN_POINT('',(94.199219,-84.2631,1.585)); +#193677 = LINE('',#193678,#193679); +#193678 = CARTESIAN_POINT('',(94.232486,-84.27688,1.585)); +#193679 = VECTOR('',#193680,1.); +#193680 = DIRECTION('',(-0.923876023059,0.382691904823,0.)); +#193681 = ORIENTED_EDGE('',*,*,#193682,.T.); +#193682 = EDGE_CURVE('',#193675,#193683,#193685,.T.); +#193683 = VERTEX_POINT('',#193684); +#193684 = CARTESIAN_POINT('',(96.84165,-84.2631,1.585)); +#193685 = LINE('',#193686,#193687); +#193686 = CARTESIAN_POINT('',(94.199219,-84.2631,1.585)); +#193687 = VECTOR('',#193688,1.); +#193688 = DIRECTION('',(1.,0.,0.)); +#193689 = ORIENTED_EDGE('',*,*,#193690,.T.); +#193690 = EDGE_CURVE('',#193683,#193691,#193693,.T.); +#193691 = VERTEX_POINT('',#193692); +#193692 = CARTESIAN_POINT('',(96.84165,-84.3831,1.585)); +#193693 = CIRCLE('',#193694,6.000000000043E-02); +#193694 = AXIS2_PLACEMENT_3D('',#193695,#193696,#193697); +#193695 = CARTESIAN_POINT('',(96.841650225588,-84.3231,1.585)); +#193696 = DIRECTION('',(0.,0.,-1.)); +#193697 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#193698 = ORIENTED_EDGE('',*,*,#193699,.T.); +#193699 = EDGE_CURVE('',#193691,#193700,#193702,.T.); +#193700 = VERTEX_POINT('',#193701); +#193701 = CARTESIAN_POINT('',(94.296268,-84.3831,1.585)); +#193702 = LINE('',#193703,#193704); +#193703 = CARTESIAN_POINT('',(96.84165,-84.3831,1.585)); +#193704 = VECTOR('',#193705,1.); +#193705 = DIRECTION('',(-1.,0.,0.)); +#193706 = ORIENTED_EDGE('',*,*,#193707,.T.); +#193707 = EDGE_CURVE('',#193700,#193708,#193710,.T.); +#193708 = VERTEX_POINT('',#193709); +#193709 = CARTESIAN_POINT('',(94.296268,-84.372336,1.585)); +#193710 = LINE('',#193711,#193712); +#193711 = CARTESIAN_POINT('',(94.296268,-84.3831,1.585)); +#193712 = VECTOR('',#193713,1.); +#193713 = DIRECTION('',(0.,1.,0.)); +#193714 = ORIENTED_EDGE('',*,*,#193715,.T.); +#193715 = EDGE_CURVE('',#193708,#193716,#193718,.T.); +#193716 = VERTEX_POINT('',#193717); +#193717 = CARTESIAN_POINT('',(94.27387,-84.318264,1.585)); +#193718 = LINE('',#193719,#193720); +#193719 = CARTESIAN_POINT('',(94.296268,-84.372336,1.585)); +#193720 = VECTOR('',#193721,1.); +#193721 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#193722 = ORIENTED_EDGE('',*,*,#193723,.T.); +#193723 = EDGE_CURVE('',#193716,#193673,#193724,.T.); +#193724 = LINE('',#193725,#193726); +#193725 = CARTESIAN_POINT('',(94.27387,-84.318264,1.585)); +#193726 = VECTOR('',#193727,1.); +#193727 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#193728 = PLANE('',#193729); +#193729 = AXIS2_PLACEMENT_3D('',#193730,#193731,#193732); +#193730 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193731 = DIRECTION('',(0.,0.,1.)); +#193732 = DIRECTION('',(1.,0.,-0.)); +#193733 = SHELL_BASED_SURFACE_MODEL('',(#193734)); +#193734 = OPEN_SHELL('',(#193735)); +#193735 = ADVANCED_FACE('',(#193736),#193797,.T.); +#193736 = FACE_BOUND('',#193737,.F.); +#193737 = EDGE_LOOP('',(#193738,#193749,#193757,#193766,#193774,#193783, + #193791)); +#193738 = ORIENTED_EDGE('',*,*,#193739,.T.); +#193739 = EDGE_CURVE('',#193740,#193742,#193744,.T.); +#193740 = VERTEX_POINT('',#193741); +#193741 = CARTESIAN_POINT('',(112.892494,-83.356478,1.585)); +#193742 = VERTEX_POINT('',#193743); +#193743 = CARTESIAN_POINT('',(112.907126,-83.207919,1.585)); +#193744 = CIRCLE('',#193745,7.500006711464E-02); +#193745 = AXIS2_PLACEMENT_3D('',#193746,#193747,#193748); +#193746 = CARTESIAN_POINT('',(112.90712593288,-83.28291906711,1.585)); +#193747 = DIRECTION('',(0.,0.,-1.)); +#193748 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#193749 = ORIENTED_EDGE('',*,*,#193750,.T.); +#193750 = EDGE_CURVE('',#193742,#193751,#193753,.T.); +#193751 = VERTEX_POINT('',#193752); +#193752 = CARTESIAN_POINT('',(113.588424,-83.20936,1.585)); +#193753 = LINE('',#193754,#193755); +#193754 = CARTESIAN_POINT('',(112.907126,-83.207919,1.585)); +#193755 = VECTOR('',#193756,1.); +#193756 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#193757 = ORIENTED_EDGE('',*,*,#193758,.T.); +#193758 = EDGE_CURVE('',#193751,#193759,#193761,.T.); +#193759 = VERTEX_POINT('',#193760); +#193760 = CARTESIAN_POINT('',(113.642728,-83.312463,1.585)); +#193761 = CIRCLE('',#193762,7.500015546833E-02); +#193762 = AXIS2_PLACEMENT_3D('',#193763,#193764,#193765); +#193763 = CARTESIAN_POINT('',(113.57379197422,-83.28291900449,1.585)); +#193764 = DIRECTION('',(0.,0.,-1.)); +#193765 = DIRECTION('',(0.195093272598,0.980784693491,0.)); +#193766 = ORIENTED_EDGE('',*,*,#193767,.T.); +#193767 = EDGE_CURVE('',#193759,#193768,#193770,.T.); +#193768 = VERTEX_POINT('',#193769); +#193769 = CARTESIAN_POINT('',(113.207069,-84.325344,1.585)); +#193770 = LINE('',#193771,#193772); +#193771 = CARTESIAN_POINT('',(113.642728,-83.312463,1.585)); +#193772 = VECTOR('',#193773,1.); +#193773 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#193774 = ORIENTED_EDGE('',*,*,#193775,.T.); +#193775 = EDGE_CURVE('',#193768,#193776,#193778,.T.); +#193776 = VERTEX_POINT('',#193777); +#193777 = CARTESIAN_POINT('',(113.076285,-84.253375,1.585)); +#193778 = CIRCLE('',#193779,7.500030178421E-02); +#193779 = AXIS2_PLACEMENT_3D('',#193780,#193781,#193782); +#193780 = CARTESIAN_POINT('',(113.14522134698,-84.28291861745,1.585)); +#193781 = DIRECTION('',(-0.,0.,-1.)); +#193782 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#193783 = ORIENTED_EDGE('',*,*,#193784,.T.); +#193784 = EDGE_CURVE('',#193776,#193785,#193787,.T.); +#193785 = VERTEX_POINT('',#193786); +#193786 = CARTESIAN_POINT('',(113.460051,-83.357919,1.585)); +#193787 = LINE('',#193788,#193789); +#193788 = CARTESIAN_POINT('',(113.076285,-84.253375,1.585)); +#193789 = VECTOR('',#193790,1.); +#193790 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#193791 = ORIENTED_EDGE('',*,*,#193792,.T.); +#193792 = EDGE_CURVE('',#193785,#193740,#193793,.T.); +#193793 = LINE('',#193794,#193795); +#193794 = CARTESIAN_POINT('',(113.460051,-83.357919,1.585)); +#193795 = VECTOR('',#193796,1.); +#193796 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#193797 = PLANE('',#193798); +#193798 = AXIS2_PLACEMENT_3D('',#193799,#193800,#193801); +#193799 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193800 = DIRECTION('',(0.,0.,1.)); +#193801 = DIRECTION('',(1.,0.,-0.)); +#193802 = SHELL_BASED_SURFACE_MODEL('',(#193803)); +#193803 = OPEN_SHELL('',(#193804)); +#193804 = ADVANCED_FACE('',(#193805,#193939),#193998,.T.); +#193805 = FACE_BOUND('',#193806,.F.); +#193806 = EDGE_LOOP('',(#193807,#193818,#193826,#193834,#193842,#193850, + #193858,#193867,#193875,#193883,#193891,#193900,#193908,#193917, + #193925,#193933)); +#193807 = ORIENTED_EDGE('',*,*,#193808,.T.); +#193808 = EDGE_CURVE('',#193809,#193811,#193813,.T.); +#193809 = VERTEX_POINT('',#193810); +#193810 = CARTESIAN_POINT('',(150.608013,-83.733961,1.585)); +#193811 = VERTEX_POINT('',#193812); +#193812 = CARTESIAN_POINT('',(150.888666,-83.684718,1.585)); +#193813 = CIRCLE('',#193814,0.327183487819); +#193814 = AXIS2_PLACEMENT_3D('',#193815,#193816,#193817); +#193815 = CARTESIAN_POINT('',(150.79924076591,-83.99944353472,1.585)); +#193816 = DIRECTION('',(0.,0.,-1.)); +#193817 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#193818 = ORIENTED_EDGE('',*,*,#193819,.T.); +#193819 = EDGE_CURVE('',#193811,#193820,#193822,.T.); +#193820 = VERTEX_POINT('',#193821); +#193821 = CARTESIAN_POINT('',(150.991273,-83.739751,1.585)); +#193822 = LINE('',#193823,#193824); +#193823 = CARTESIAN_POINT('',(150.888666,-83.684718,1.585)); +#193824 = VECTOR('',#193825,1.); +#193825 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#193826 = ORIENTED_EDGE('',*,*,#193827,.T.); +#193827 = EDGE_CURVE('',#193820,#193828,#193830,.T.); +#193828 = VERTEX_POINT('',#193829); +#193829 = CARTESIAN_POINT('',(151.046306,-83.799501,1.585)); +#193830 = LINE('',#193831,#193832); +#193831 = CARTESIAN_POINT('',(150.991273,-83.739751,1.585)); +#193832 = VECTOR('',#193833,1.); +#193833 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#193834 = ORIENTED_EDGE('',*,*,#193835,.T.); +#193835 = EDGE_CURVE('',#193828,#193836,#193838,.T.); +#193836 = VERTEX_POINT('',#193837); +#193837 = CARTESIAN_POINT('',(151.093109,-83.899628,1.585)); +#193838 = LINE('',#193839,#193840); +#193839 = CARTESIAN_POINT('',(151.046306,-83.799501,1.585)); +#193840 = VECTOR('',#193841,1.); +#193841 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#193842 = ORIENTED_EDGE('',*,*,#193843,.T.); +#193843 = EDGE_CURVE('',#193836,#193844,#193846,.T.); +#193844 = VERTEX_POINT('',#193845); +#193845 = CARTESIAN_POINT('',(151.096025,-83.918013,1.585)); +#193846 = LINE('',#193847,#193848); +#193847 = CARTESIAN_POINT('',(151.093109,-83.899628,1.585)); +#193848 = VECTOR('',#193849,1.); +#193849 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#193850 = ORIENTED_EDGE('',*,*,#193851,.T.); +#193851 = EDGE_CURVE('',#193844,#193852,#193854,.T.); +#193852 = VERTEX_POINT('',#193853); +#193853 = CARTESIAN_POINT('',(151.422322,-83.689606,1.585)); +#193854 = LINE('',#193855,#193856); +#193855 = CARTESIAN_POINT('',(151.096025,-83.918013,1.585)); +#193856 = VECTOR('',#193857,1.); +#193857 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#193858 = ORIENTED_EDGE('',*,*,#193859,.T.); +#193859 = EDGE_CURVE('',#193852,#193860,#193862,.T.); +#193860 = VERTEX_POINT('',#193861); +#193861 = CARTESIAN_POINT('',(151.496872,-83.796106,1.585)); +#193862 = CIRCLE('',#193863,6.499990865384E-02); +#193863 = AXIS2_PLACEMENT_3D('',#193864,#193865,#193866); +#193864 = CARTESIAN_POINT('',(151.45959707222,-83.74285594944,1.585)); +#193865 = DIRECTION('',(0.,0.,-1.)); +#193866 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#193867 = ORIENTED_EDGE('',*,*,#193868,.T.); +#193868 = EDGE_CURVE('',#193860,#193869,#193871,.T.); +#193869 = VERTEX_POINT('',#193870); +#193870 = CARTESIAN_POINT('',(151.096025,-84.076698,1.585)); +#193871 = LINE('',#193872,#193873); +#193872 = CARTESIAN_POINT('',(151.496872,-83.796106,1.585)); +#193873 = VECTOR('',#193874,1.); +#193874 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#193875 = ORIENTED_EDGE('',*,*,#193876,.T.); +#193876 = EDGE_CURVE('',#193869,#193877,#193879,.T.); +#193877 = VERTEX_POINT('',#193878); +#193878 = CARTESIAN_POINT('',(151.096025,-84.192142,1.585)); +#193879 = LINE('',#193880,#193881); +#193880 = CARTESIAN_POINT('',(151.096025,-84.076698,1.585)); +#193881 = VECTOR('',#193882,1.); +#193882 = DIRECTION('',(0.,-1.,0.)); +#193883 = ORIENTED_EDGE('',*,*,#193884,.T.); +#193884 = EDGE_CURVE('',#193877,#193885,#193887,.T.); +#193885 = VERTEX_POINT('',#193886); +#193886 = CARTESIAN_POINT('',(151.459597,-84.192142,1.585)); +#193887 = LINE('',#193888,#193889); +#193888 = CARTESIAN_POINT('',(151.096025,-84.192142,1.585)); +#193889 = VECTOR('',#193890,1.); +#193890 = DIRECTION('',(1.,0.,0.)); +#193891 = ORIENTED_EDGE('',*,*,#193892,.T.); +#193892 = EDGE_CURVE('',#193885,#193893,#193895,.T.); +#193893 = VERTEX_POINT('',#193894); +#193894 = CARTESIAN_POINT('',(151.459597,-84.322142,1.585)); +#193895 = CIRCLE('',#193896,6.500000000092E-02); +#193896 = AXIS2_PLACEMENT_3D('',#193897,#193898,#193899); +#193897 = CARTESIAN_POINT('',(151.45959665513,-84.257142,1.585)); +#193898 = DIRECTION('',(0.,0.,-1.)); +#193899 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#193900 = ORIENTED_EDGE('',*,*,#193901,.T.); +#193901 = EDGE_CURVE('',#193893,#193902,#193904,.T.); +#193902 = VERTEX_POINT('',#193903); +#193903 = CARTESIAN_POINT('',(150.559597,-84.322142,1.585)); +#193904 = LINE('',#193905,#193906); +#193905 = CARTESIAN_POINT('',(151.459597,-84.322142,1.585)); +#193906 = VECTOR('',#193907,1.); +#193907 = DIRECTION('',(-1.,0.,0.)); +#193908 = ORIENTED_EDGE('',*,*,#193909,.T.); +#193909 = EDGE_CURVE('',#193902,#193910,#193912,.T.); +#193910 = VERTEX_POINT('',#193911); +#193911 = CARTESIAN_POINT('',(150.494597,-84.257142,1.585)); +#193912 = CIRCLE('',#193913,6.500103935392E-02); +#193913 = AXIS2_PLACEMENT_3D('',#193914,#193915,#193916); +#193914 = CARTESIAN_POINT('',(150.55959803934,-84.25714096065,1.585)); +#193915 = DIRECTION('',(0.,0.,-1.)); +#193916 = DIRECTION('',(-1.598967692944E-05,-0.999999999872,-0.)); +#193917 = ORIENTED_EDGE('',*,*,#193918,.T.); +#193918 = EDGE_CURVE('',#193910,#193919,#193921,.T.); +#193919 = VERTEX_POINT('',#193920); +#193920 = CARTESIAN_POINT('',(150.497512,-83.899628,1.585)); +#193921 = LINE('',#193922,#193923); +#193922 = CARTESIAN_POINT('',(150.494597,-84.257142,1.585)); +#193923 = VECTOR('',#193924,1.); +#193924 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#193925 = ORIENTED_EDGE('',*,*,#193926,.T.); +#193926 = EDGE_CURVE('',#193919,#193927,#193929,.T.); +#193927 = VERTEX_POINT('',#193928); +#193928 = CARTESIAN_POINT('',(150.550702,-83.791272,1.585)); +#193929 = LINE('',#193930,#193931); +#193930 = CARTESIAN_POINT('',(150.497512,-83.899628,1.585)); +#193931 = VECTOR('',#193932,1.); +#193932 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#193933 = ORIENTED_EDGE('',*,*,#193934,.T.); +#193934 = EDGE_CURVE('',#193927,#193809,#193935,.T.); +#193935 = LINE('',#193936,#193937); +#193936 = CARTESIAN_POINT('',(150.550702,-83.791272,1.585)); +#193937 = VECTOR('',#193938,1.); +#193938 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#193939 = FACE_BOUND('',#193940,.F.); +#193940 = EDGE_LOOP('',(#193941,#193952,#193960,#193968,#193976,#193984, + #193992)); +#193941 = ORIENTED_EDGE('',*,*,#193942,.T.); +#193942 = EDGE_CURVE('',#193943,#193945,#193947,.T.); +#193943 = VERTEX_POINT('',#193944); +#193944 = CARTESIAN_POINT('',(150.906808,-83.839134,1.585)); +#193945 = VERTEX_POINT('',#193946); +#193946 = CARTESIAN_POINT('',(150.655875,-83.867072,1.585)); +#193947 = CIRCLE('',#193948,0.180979134862); +#193948 = AXIS2_PLACEMENT_3D('',#193949,#193950,#193951); +#193949 = CARTESIAN_POINT('',(150.79569076987,-83.98198500078,1.585)); +#193950 = DIRECTION('',(0.,0.,1.)); +#193951 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#193952 = ORIENTED_EDGE('',*,*,#193953,.T.); +#193953 = EDGE_CURVE('',#193945,#193954,#193956,.T.); +#193954 = VERTEX_POINT('',#193955); +#193955 = CARTESIAN_POINT('',(150.624597,-83.929629,1.585)); +#193956 = LINE('',#193957,#193958); +#193957 = CARTESIAN_POINT('',(150.655875,-83.867072,1.585)); +#193958 = VECTOR('',#193959,1.); +#193959 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#193960 = ORIENTED_EDGE('',*,*,#193961,.T.); +#193961 = EDGE_CURVE('',#193954,#193962,#193964,.T.); +#193962 = VERTEX_POINT('',#193963); +#193963 = CARTESIAN_POINT('',(150.624597,-84.192142,1.585)); +#193964 = LINE('',#193965,#193966); +#193965 = CARTESIAN_POINT('',(150.624597,-83.929629,1.585)); +#193966 = VECTOR('',#193967,1.); +#193967 = DIRECTION('',(0.,-1.,0.)); +#193968 = ORIENTED_EDGE('',*,*,#193969,.T.); +#193969 = EDGE_CURVE('',#193962,#193970,#193972,.T.); +#193970 = VERTEX_POINT('',#193971); +#193971 = CARTESIAN_POINT('',(150.966025,-84.192142,1.585)); +#193972 = LINE('',#193973,#193974); +#193973 = CARTESIAN_POINT('',(150.624597,-84.192142,1.585)); +#193974 = VECTOR('',#193975,1.); +#193975 = DIRECTION('',(1.,0.,0.)); +#193976 = ORIENTED_EDGE('',*,*,#193977,.T.); +#193977 = EDGE_CURVE('',#193970,#193978,#193980,.T.); +#193978 = VERTEX_POINT('',#193979); +#193979 = CARTESIAN_POINT('',(150.966025,-83.929629,1.585)); +#193980 = LINE('',#193981,#193982); +#193981 = CARTESIAN_POINT('',(150.966025,-84.192142,1.585)); +#193982 = VECTOR('',#193983,1.); +#193983 = DIRECTION('',(0.,1.,0.)); +#193984 = ORIENTED_EDGE('',*,*,#193985,.T.); +#193985 = EDGE_CURVE('',#193978,#193986,#193988,.T.); +#193986 = VERTEX_POINT('',#193987); +#193987 = CARTESIAN_POINT('',(150.934746,-83.867072,1.585)); +#193988 = LINE('',#193989,#193990); +#193989 = CARTESIAN_POINT('',(150.966025,-83.929629,1.585)); +#193990 = VECTOR('',#193991,1.); +#193991 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#193992 = ORIENTED_EDGE('',*,*,#193993,.T.); +#193993 = EDGE_CURVE('',#193986,#193943,#193994,.T.); +#193994 = LINE('',#193995,#193996); +#193995 = CARTESIAN_POINT('',(150.934746,-83.867072,1.585)); +#193996 = VECTOR('',#193997,1.); +#193997 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#193998 = PLANE('',#193999); +#193999 = AXIS2_PLACEMENT_3D('',#194000,#194001,#194002); +#194000 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194001 = DIRECTION('',(0.,0.,1.)); +#194002 = DIRECTION('',(1.,0.,-0.)); +#194003 = SHELL_BASED_SURFACE_MODEL('',(#194004)); +#194004 = OPEN_SHELL('',(#194005)); +#194005 = ADVANCED_FACE('',(#194006),#194083,.T.); +#194006 = FACE_BOUND('',#194007,.F.); +#194007 = EDGE_LOOP('',(#194008,#194019,#194027,#194035,#194044,#194052, + #194060,#194069,#194077)); +#194008 = ORIENTED_EDGE('',*,*,#194009,.T.); +#194009 = EDGE_CURVE('',#194010,#194012,#194014,.T.); +#194010 = VERTEX_POINT('',#194011); +#194011 = CARTESIAN_POINT('',(147.749545,-83.639411,1.585)); +#194012 = VERTEX_POINT('',#194013); +#194013 = CARTESIAN_POINT('',(147.874597,-83.664285,1.585)); +#194014 = CIRCLE('',#194015,6.499988811647E-02); +#194015 = AXIS2_PLACEMENT_3D('',#194016,#194017,#194018); +#194016 = CARTESIAN_POINT('',(147.80959711188,-83.6642852701,1.585)); +#194017 = DIRECTION('',(0.,0.,-1.)); +#194018 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#194019 = ORIENTED_EDGE('',*,*,#194020,.T.); +#194020 = EDGE_CURVE('',#194012,#194021,#194023,.T.); +#194021 = VERTEX_POINT('',#194022); +#194022 = CARTESIAN_POINT('',(147.874597,-83.856427,1.585)); +#194023 = LINE('',#194024,#194025); +#194024 = CARTESIAN_POINT('',(147.874597,-83.664285,1.585)); +#194025 = VECTOR('',#194026,1.); +#194026 = DIRECTION('',(0.,-1.,0.)); +#194027 = ORIENTED_EDGE('',*,*,#194028,.T.); +#194028 = EDGE_CURVE('',#194021,#194029,#194031,.T.); +#194029 = VERTEX_POINT('',#194030); +#194030 = CARTESIAN_POINT('',(148.709597,-83.856427,1.585)); +#194031 = LINE('',#194032,#194033); +#194032 = CARTESIAN_POINT('',(147.874597,-83.856427,1.585)); +#194033 = VECTOR('',#194034,1.); +#194034 = DIRECTION('',(1.,0.,0.)); +#194035 = ORIENTED_EDGE('',*,*,#194036,.T.); +#194036 = EDGE_CURVE('',#194029,#194037,#194039,.T.); +#194037 = VERTEX_POINT('',#194038); +#194038 = CARTESIAN_POINT('',(148.709597,-83.986427,1.585)); +#194039 = CIRCLE('',#194040,6.500000000092E-02); +#194040 = AXIS2_PLACEMENT_3D('',#194041,#194042,#194043); +#194041 = CARTESIAN_POINT('',(148.70959665513,-83.921427,1.585)); +#194042 = DIRECTION('',(0.,0.,-1.)); +#194043 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#194044 = ORIENTED_EDGE('',*,*,#194045,.T.); +#194045 = EDGE_CURVE('',#194037,#194046,#194048,.T.); +#194046 = VERTEX_POINT('',#194047); +#194047 = CARTESIAN_POINT('',(147.874597,-83.986427,1.585)); +#194048 = LINE('',#194049,#194050); +#194049 = CARTESIAN_POINT('',(148.709597,-83.986427,1.585)); +#194050 = VECTOR('',#194051,1.); +#194051 = DIRECTION('',(-1.,0.,0.)); +#194052 = ORIENTED_EDGE('',*,*,#194053,.T.); +#194053 = EDGE_CURVE('',#194046,#194054,#194056,.T.); +#194054 = VERTEX_POINT('',#194055); +#194055 = CARTESIAN_POINT('',(147.874597,-84.17857,1.585)); +#194056 = LINE('',#194057,#194058); +#194057 = CARTESIAN_POINT('',(147.874597,-83.986427,1.585)); +#194058 = VECTOR('',#194059,1.); +#194059 = DIRECTION('',(0.,-1.,0.)); +#194060 = ORIENTED_EDGE('',*,*,#194061,.T.); +#194061 = EDGE_CURVE('',#194054,#194062,#194064,.T.); +#194062 = VERTEX_POINT('',#194063); +#194063 = CARTESIAN_POINT('',(147.744597,-84.17857,1.585)); +#194064 = CIRCLE('',#194065,6.500000000091E-02); +#194065 = AXIS2_PLACEMENT_3D('',#194066,#194067,#194068); +#194066 = CARTESIAN_POINT('',(147.809597,-84.17856965513,1.585)); +#194067 = DIRECTION('',(-0.,0.,-1.)); +#194068 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#194069 = ORIENTED_EDGE('',*,*,#194070,.T.); +#194070 = EDGE_CURVE('',#194062,#194071,#194073,.T.); +#194071 = VERTEX_POINT('',#194072); +#194072 = CARTESIAN_POINT('',(147.744597,-83.664285,1.585)); +#194073 = LINE('',#194074,#194075); +#194074 = CARTESIAN_POINT('',(147.744597,-84.17857,1.585)); +#194075 = VECTOR('',#194076,1.); +#194076 = DIRECTION('',(0.,1.,0.)); +#194077 = ORIENTED_EDGE('',*,*,#194078,.T.); +#194078 = EDGE_CURVE('',#194071,#194010,#194079,.T.); +#194079 = LINE('',#194080,#194081); +#194080 = CARTESIAN_POINT('',(147.744597,-83.664285,1.585)); +#194081 = VECTOR('',#194082,1.); +#194082 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#194083 = PLANE('',#194084); +#194084 = AXIS2_PLACEMENT_3D('',#194085,#194086,#194087); +#194085 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194086 = DIRECTION('',(0.,0.,1.)); +#194087 = DIRECTION('',(1.,0.,-0.)); +#194088 = SHELL_BASED_SURFACE_MODEL('',(#194089)); +#194089 = OPEN_SHELL('',(#194090)); +#194090 = ADVANCED_FACE('',(#194091),#194127,.T.); +#194091 = FACE_BOUND('',#194092,.F.); +#194092 = EDGE_LOOP('',(#194093,#194104,#194112,#194121)); +#194093 = ORIENTED_EDGE('',*,*,#194094,.T.); +#194094 = EDGE_CURVE('',#194095,#194097,#194099,.T.); +#194095 = VERTEX_POINT('',#194096); +#194096 = CARTESIAN_POINT('',(202.812742,-83.9875,1.585)); +#194097 = VERTEX_POINT('',#194098); +#194098 = CARTESIAN_POINT('',(202.812742,-83.8675,1.585)); +#194099 = CIRCLE('',#194100,6.000000000042E-02); +#194100 = AXIS2_PLACEMENT_3D('',#194101,#194102,#194103); +#194101 = CARTESIAN_POINT('',(202.81274177441,-83.9275,1.585)); +#194102 = DIRECTION('',(0.,0.,-1.)); +#194103 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#194104 = ORIENTED_EDGE('',*,*,#194105,.T.); +#194105 = EDGE_CURVE('',#194097,#194106,#194108,.T.); +#194106 = VERTEX_POINT('',#194107); +#194107 = CARTESIAN_POINT('',(203.287258,-83.8675,1.585)); +#194108 = LINE('',#194109,#194110); +#194109 = CARTESIAN_POINT('',(202.812742,-83.8675,1.585)); +#194110 = VECTOR('',#194111,1.); +#194111 = DIRECTION('',(1.,0.,0.)); +#194112 = ORIENTED_EDGE('',*,*,#194113,.T.); +#194113 = EDGE_CURVE('',#194106,#194114,#194116,.T.); +#194114 = VERTEX_POINT('',#194115); +#194115 = CARTESIAN_POINT('',(203.287258,-83.9875,1.585)); +#194116 = CIRCLE('',#194117,6.000000000042E-02); +#194117 = AXIS2_PLACEMENT_3D('',#194118,#194119,#194120); +#194118 = CARTESIAN_POINT('',(203.28725822558,-83.9275,1.585)); +#194119 = DIRECTION('',(0.,0.,-1.)); +#194120 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#194121 = ORIENTED_EDGE('',*,*,#194122,.T.); +#194122 = EDGE_CURVE('',#194114,#194095,#194123,.T.); +#194123 = LINE('',#194124,#194125); +#194124 = CARTESIAN_POINT('',(203.287258,-83.9875,1.585)); +#194125 = VECTOR('',#194126,1.); +#194126 = DIRECTION('',(-1.,0.,0.)); +#194127 = PLANE('',#194128); +#194128 = AXIS2_PLACEMENT_3D('',#194129,#194130,#194131); +#194129 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194130 = DIRECTION('',(0.,0.,1.)); +#194131 = DIRECTION('',(1.,0.,-0.)); +#194132 = SHELL_BASED_SURFACE_MODEL('',(#194133)); +#194133 = OPEN_SHELL('',(#194134)); +#194134 = ADVANCED_FACE('',(#194135),#194171,.T.); +#194135 = FACE_BOUND('',#194136,.F.); +#194136 = EDGE_LOOP('',(#194137,#194148,#194156,#194165)); +#194137 = ORIENTED_EDGE('',*,*,#194138,.T.); +#194138 = EDGE_CURVE('',#194139,#194141,#194143,.T.); +#194139 = VERTEX_POINT('',#194140); +#194140 = CARTESIAN_POINT('',(101.45107,-83.8931,1.585)); +#194141 = VERTEX_POINT('',#194142); +#194142 = CARTESIAN_POINT('',(101.45107,-83.7731,1.585)); +#194143 = CIRCLE('',#194144,6.000000000042E-02); +#194144 = AXIS2_PLACEMENT_3D('',#194145,#194146,#194147); +#194145 = CARTESIAN_POINT('',(101.45106977441,-83.8331,1.585)); +#194146 = DIRECTION('',(0.,0.,-1.)); +#194147 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#194148 = ORIENTED_EDGE('',*,*,#194149,.T.); +#194149 = EDGE_CURVE('',#194141,#194150,#194152,.T.); +#194150 = VERTEX_POINT('',#194151); +#194151 = CARTESIAN_POINT('',(101.73223,-83.7731,1.585)); +#194152 = LINE('',#194153,#194154); +#194153 = CARTESIAN_POINT('',(101.45107,-83.7731,1.585)); +#194154 = VECTOR('',#194155,1.); +#194155 = DIRECTION('',(1.,0.,0.)); +#194156 = ORIENTED_EDGE('',*,*,#194157,.T.); +#194157 = EDGE_CURVE('',#194150,#194158,#194160,.T.); +#194158 = VERTEX_POINT('',#194159); +#194159 = CARTESIAN_POINT('',(101.73223,-83.8931,1.585)); +#194160 = CIRCLE('',#194161,6.000000000042E-02); +#194161 = AXIS2_PLACEMENT_3D('',#194162,#194163,#194164); +#194162 = CARTESIAN_POINT('',(101.73223022558,-83.8331,1.585)); +#194163 = DIRECTION('',(0.,0.,-1.)); +#194164 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#194165 = ORIENTED_EDGE('',*,*,#194166,.T.); +#194166 = EDGE_CURVE('',#194158,#194139,#194167,.T.); +#194167 = LINE('',#194168,#194169); +#194168 = CARTESIAN_POINT('',(101.73223,-83.8931,1.585)); +#194169 = VECTOR('',#194170,1.); +#194170 = DIRECTION('',(-1.,0.,0.)); +#194171 = PLANE('',#194172); +#194172 = AXIS2_PLACEMENT_3D('',#194173,#194174,#194175); +#194173 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194174 = DIRECTION('',(0.,0.,1.)); +#194175 = DIRECTION('',(1.,0.,-0.)); +#194176 = SHELL_BASED_SURFACE_MODEL('',(#194177)); +#194177 = OPEN_SHELL('',(#194178)); +#194178 = ADVANCED_FACE('',(#194179,#194248),#194274,.T.); +#194179 = FACE_BOUND('',#194180,.F.); +#194180 = EDGE_LOOP('',(#194181,#194192,#194200,#194209,#194217,#194225, + #194233,#194242)); +#194181 = ORIENTED_EDGE('',*,*,#194182,.T.); +#194182 = EDGE_CURVE('',#194183,#194185,#194187,.T.); +#194183 = VERTEX_POINT('',#194184); +#194184 = CARTESIAN_POINT('',(85.387075,-82.614925,1.585)); +#194185 = VERTEX_POINT('',#194186); +#194186 = CARTESIAN_POINT('',(85.360224,-82.887541,1.585)); +#194187 = CIRCLE('',#194188,0.149999725371); +#194188 = AXIS2_PLACEMENT_3D('',#194189,#194190,#194191); +#194189 = CARTESIAN_POINT('',(85.312790061146,-82.74523871942,1.585)); +#194190 = DIRECTION('',(0.,0.,-1.)); +#194191 = DIRECTION('',(0.495233832397,0.868759720089,0.)); +#194192 = ORIENTED_EDGE('',*,*,#194193,.T.); +#194193 = EDGE_CURVE('',#194185,#194194,#194196,.T.); +#194194 = VERTEX_POINT('',#194195); +#194195 = CARTESIAN_POINT('',(82.731551,-83.760728,1.585)); +#194196 = LINE('',#194197,#194198); +#194197 = CARTESIAN_POINT('',(85.360224,-82.887541,1.585)); +#194198 = VECTOR('',#194199,1.); +#194199 = DIRECTION('',(-0.949011749004,-0.315240702087,0.)); +#194200 = ORIENTED_EDGE('',*,*,#194201,.T.); +#194201 = EDGE_CURVE('',#194194,#194202,#194204,.T.); +#194202 = VERTEX_POINT('',#194203); +#194203 = CARTESIAN_POINT('',(82.638505,-83.481592,1.585)); +#194204 = CIRCLE('',#194205,0.149999919344); +#194205 = AXIS2_PLACEMENT_3D('',#194206,#194207,#194208); +#194206 = CARTESIAN_POINT('',(82.7127898908,-83.61190597009,1.585)); +#194207 = DIRECTION('',(0.,0.,-1.)); +#194208 = DIRECTION('',(0.125074128588,-0.992147399512,0.)); +#194209 = ORIENTED_EDGE('',*,*,#194210,.T.); +#194210 = EDGE_CURVE('',#194202,#194211,#194213,.T.); +#194211 = VERTEX_POINT('',#194212); +#194212 = CARTESIAN_POINT('',(83.305647,-83.256173,1.585)); +#194213 = LINE('',#194214,#194215); +#194214 = CARTESIAN_POINT('',(82.638505,-83.481592,1.585)); +#194215 = VECTOR('',#194216,1.); +#194216 = DIRECTION('',(0.947380967027,0.320108268114,0.)); +#194217 = ORIENTED_EDGE('',*,*,#194218,.T.); +#194218 = EDGE_CURVE('',#194211,#194219,#194221,.T.); +#194219 = VERTEX_POINT('',#194220); +#194220 = CARTESIAN_POINT('',(83.305647,-82.234306,1.585)); +#194221 = LINE('',#194222,#194223); +#194222 = CARTESIAN_POINT('',(83.305647,-83.256173,1.585)); +#194223 = VECTOR('',#194224,1.); +#194224 = DIRECTION('',(0.,1.,0.)); +#194225 = ORIENTED_EDGE('',*,*,#194226,.T.); +#194226 = EDGE_CURVE('',#194219,#194227,#194229,.T.); +#194227 = VERTEX_POINT('',#194228); +#194228 = CARTESIAN_POINT('',(82.638505,-82.008887,1.585)); +#194229 = LINE('',#194230,#194231); +#194230 = CARTESIAN_POINT('',(83.305647,-82.234306,1.585)); +#194231 = VECTOR('',#194232,1.); +#194232 = DIRECTION('',(-0.947380967027,0.320108268114,0.)); +#194233 = ORIENTED_EDGE('',*,*,#194234,.T.); +#194234 = EDGE_CURVE('',#194227,#194235,#194237,.T.); +#194235 = VERTEX_POINT('',#194236); +#194236 = CARTESIAN_POINT('',(82.760224,-81.73627,1.585)); +#194237 = CIRCLE('',#194238,0.15000021416); +#194238 = AXIS2_PLACEMENT_3D('',#194239,#194240,#194241); +#194239 = CARTESIAN_POINT('',(82.71279009555,-81.87857280726,1.585)); +#194240 = DIRECTION('',(0.,0.,-1.)); +#194241 = DIRECTION('',(-0.495233263271,-0.868760044517,-0.)); +#194242 = ORIENTED_EDGE('',*,*,#194243,.T.); +#194243 = EDGE_CURVE('',#194235,#194183,#194244,.T.); +#194244 = LINE('',#194245,#194246); +#194245 = CARTESIAN_POINT('',(82.760224,-81.73627,1.585)); +#194246 = VECTOR('',#194247,1.); +#194247 = DIRECTION('',(0.948353748101,-0.317214704046,0.)); +#194248 = FACE_BOUND('',#194249,.F.); +#194249 = EDGE_LOOP('',(#194250,#194260,#194268)); +#194250 = ORIENTED_EDGE('',*,*,#194251,.T.); +#194251 = EDGE_CURVE('',#194252,#194254,#194256,.T.); +#194252 = VERTEX_POINT('',#194253); +#194253 = CARTESIAN_POINT('',(83.605647,-83.156173,1.585)); +#194254 = VERTEX_POINT('',#194255); +#194255 = CARTESIAN_POINT('',(84.838448,-82.745238,1.585)); +#194256 = LINE('',#194257,#194258); +#194257 = CARTESIAN_POINT('',(83.605647,-83.156173,1.585)); +#194258 = VECTOR('',#194259,1.); +#194259 = DIRECTION('',(0.948682990236,0.316228689458,0.)); +#194260 = ORIENTED_EDGE('',*,*,#194261,.T.); +#194261 = EDGE_CURVE('',#194254,#194262,#194264,.T.); +#194262 = VERTEX_POINT('',#194263); +#194263 = CARTESIAN_POINT('',(83.605647,-82.334305,1.585)); +#194264 = LINE('',#194265,#194266); +#194265 = CARTESIAN_POINT('',(84.838448,-82.745238,1.585)); +#194266 = VECTOR('',#194267,1.); +#194267 = DIRECTION('',(-0.948683451957,0.316227304296,0.)); +#194268 = ORIENTED_EDGE('',*,*,#194269,.T.); +#194269 = EDGE_CURVE('',#194262,#194252,#194270,.T.); +#194270 = LINE('',#194271,#194272); +#194271 = CARTESIAN_POINT('',(83.605647,-82.334305,1.585)); +#194272 = VECTOR('',#194273,1.); +#194273 = DIRECTION('',(0.,-1.,0.)); +#194274 = PLANE('',#194275); +#194275 = AXIS2_PLACEMENT_3D('',#194276,#194277,#194278); +#194276 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194277 = DIRECTION('',(0.,0.,1.)); +#194278 = DIRECTION('',(1.,0.,-0.)); +#194279 = SHELL_BASED_SURFACE_MODEL('',(#194280)); +#194280 = OPEN_SHELL('',(#194281)); +#194281 = ADVANCED_FACE('',(#194282,#194422),#194489,.T.); +#194282 = FACE_BOUND('',#194283,.F.); +#194283 = EDGE_LOOP('',(#194284,#194294,#194302,#194310,#194318,#194326, + #194334,#194342,#194350,#194358,#194366,#194375,#194383,#194392, + #194400,#194408,#194416)); +#194284 = ORIENTED_EDGE('',*,*,#194285,.T.); +#194285 = EDGE_CURVE('',#194286,#194288,#194290,.T.); +#194286 = VERTEX_POINT('',#194287); +#194287 = CARTESIAN_POINT('',(185.164351,-82.66624,1.585)); +#194288 = VERTEX_POINT('',#194289); +#194289 = CARTESIAN_POINT('',(185.346108,-82.57653,1.585)); +#194290 = LINE('',#194291,#194292); +#194291 = CARTESIAN_POINT('',(185.164351,-82.66624,1.585)); +#194292 = VECTOR('',#194293,1.); +#194293 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#194294 = ORIENTED_EDGE('',*,*,#194295,.T.); +#194295 = EDGE_CURVE('',#194288,#194296,#194298,.T.); +#194296 = VERTEX_POINT('',#194297); +#194297 = CARTESIAN_POINT('',(185.375162,-82.572623,1.585)); +#194298 = LINE('',#194299,#194300); +#194299 = CARTESIAN_POINT('',(185.346108,-82.57653,1.585)); +#194300 = VECTOR('',#194301,1.); +#194301 = DIRECTION('',(0.991079213316,0.13327412702,0.)); +#194302 = ORIENTED_EDGE('',*,*,#194303,.T.); +#194303 = EDGE_CURVE('',#194296,#194304,#194306,.T.); +#194304 = VERTEX_POINT('',#194305); +#194305 = CARTESIAN_POINT('',(185.625193,-82.574737,1.585)); +#194306 = LINE('',#194307,#194308); +#194307 = CARTESIAN_POINT('',(185.375162,-82.572623,1.585)); +#194308 = VECTOR('',#194309,1.); +#194309 = DIRECTION('',(0.999964258813,-8.454649396022E-03,0.)); +#194310 = ORIENTED_EDGE('',*,*,#194311,.T.); +#194311 = EDGE_CURVE('',#194304,#194312,#194314,.T.); +#194312 = VERTEX_POINT('',#194313); +#194313 = CARTESIAN_POINT('',(185.652927,-82.584236,1.585)); +#194314 = LINE('',#194315,#194316); +#194315 = CARTESIAN_POINT('',(185.625193,-82.574737,1.585)); +#194316 = VECTOR('',#194317,1.); +#194317 = DIRECTION('',(0.946048457417,-0.324025178373,0.)); +#194318 = ORIENTED_EDGE('',*,*,#194319,.T.); +#194319 = EDGE_CURVE('',#194312,#194320,#194322,.T.); +#194320 = VERTEX_POINT('',#194321); +#194321 = CARTESIAN_POINT('',(185.825457,-82.674107,1.585)); +#194322 = LINE('',#194323,#194324); +#194323 = CARTESIAN_POINT('',(185.652927,-82.584236,1.585)); +#194324 = VECTOR('',#194325,1.); +#194325 = DIRECTION('',(0.886889600195,-0.461981425023,0.)); +#194326 = ORIENTED_EDGE('',*,*,#194327,.T.); +#194327 = EDGE_CURVE('',#194320,#194328,#194330,.T.); +#194328 = VERTEX_POINT('',#194329); +#194329 = CARTESIAN_POINT('',(185.924877,-82.776575,1.585)); +#194330 = LINE('',#194331,#194332); +#194331 = CARTESIAN_POINT('',(185.825457,-82.674107,1.585)); +#194332 = VECTOR('',#194333,1.); +#194333 = DIRECTION('',(0.696351894269,-0.717700522048,0.)); +#194334 = ORIENTED_EDGE('',*,*,#194335,.T.); +#194335 = EDGE_CURVE('',#194328,#194336,#194338,.T.); +#194336 = VERTEX_POINT('',#194337); +#194337 = CARTESIAN_POINT('',(186.014588,-82.958332,1.585)); +#194338 = LINE('',#194339,#194340); +#194339 = CARTESIAN_POINT('',(185.924877,-82.776575,1.585)); +#194340 = VECTOR('',#194341,1.); +#194341 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#194342 = ORIENTED_EDGE('',*,*,#194343,.T.); +#194343 = EDGE_CURVE('',#194336,#194344,#194346,.T.); +#194344 = VERTEX_POINT('',#194345); +#194345 = CARTESIAN_POINT('',(186.018495,-82.987385,1.585)); +#194346 = LINE('',#194347,#194348); +#194347 = CARTESIAN_POINT('',(186.014588,-82.958332,1.585)); +#194348 = VECTOR('',#194349,1.); +#194349 = DIRECTION('',(0.133278632812,-0.991078607395,0.)); +#194350 = ORIENTED_EDGE('',*,*,#194351,.T.); +#194351 = EDGE_CURVE('',#194344,#194352,#194354,.T.); +#194352 = VERTEX_POINT('',#194353); +#194353 = CARTESIAN_POINT('',(186.018495,-83.486909,1.585)); +#194354 = LINE('',#194355,#194356); +#194355 = CARTESIAN_POINT('',(186.018495,-82.987385,1.585)); +#194356 = VECTOR('',#194357,1.); +#194357 = DIRECTION('',(0.,-1.,0.)); +#194358 = ORIENTED_EDGE('',*,*,#194359,.T.); +#194359 = EDGE_CURVE('',#194352,#194360,#194362,.T.); +#194360 = VERTEX_POINT('',#194361); +#194361 = CARTESIAN_POINT('',(186.69186,-83.489023,1.585)); +#194362 = LINE('',#194363,#194364); +#194363 = CARTESIAN_POINT('',(186.018495,-83.486909,1.585)); +#194364 = VECTOR('',#194365,1.); +#194365 = DIRECTION('',(0.999995071943,-3.139440841289E-03,0.)); +#194366 = ORIENTED_EDGE('',*,*,#194367,.T.); +#194367 = EDGE_CURVE('',#194360,#194368,#194370,.T.); +#194368 = VERTEX_POINT('',#194369); +#194369 = CARTESIAN_POINT('',(186.69186,-83.704795,1.585)); +#194370 = CIRCLE('',#194371,0.109999639072); +#194371 = AXIS2_PLACEMENT_3D('',#194372,#194373,#194374); +#194372 = CARTESIAN_POINT('',(186.6704,-83.596909,1.585)); +#194373 = DIRECTION('',(0.,0.,-1.)); +#194374 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#194375 = ORIENTED_EDGE('',*,*,#194376,.T.); +#194376 = EDGE_CURVE('',#194368,#194377,#194379,.T.); +#194377 = VERTEX_POINT('',#194378); +#194378 = CARTESIAN_POINT('',(185.04894,-83.704795,1.585)); +#194379 = LINE('',#194380,#194381); +#194380 = CARTESIAN_POINT('',(186.69186,-83.704795,1.585)); +#194381 = VECTOR('',#194382,1.); +#194382 = DIRECTION('',(-1.,0.,0.)); +#194383 = ORIENTED_EDGE('',*,*,#194384,.T.); +#194384 = EDGE_CURVE('',#194377,#194385,#194387,.T.); +#194385 = VERTEX_POINT('',#194386); +#194386 = CARTESIAN_POINT('',(184.962514,-83.618369,1.585)); +#194387 = CIRCLE('',#194388,0.109995194153); +#194388 = AXIS2_PLACEMENT_3D('',#194389,#194390,#194391); +#194389 = CARTESIAN_POINT('',(185.07039621987,-83.59691278012,1.585)); +#194390 = DIRECTION('',(0.,0.,-1.)); +#194391 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#194392 = ORIENTED_EDGE('',*,*,#194393,.T.); +#194393 = EDGE_CURVE('',#194385,#194394,#194396,.T.); +#194394 = VERTEX_POINT('',#194395); +#194395 = CARTESIAN_POINT('',(184.962514,-82.965925,1.585)); +#194396 = LINE('',#194397,#194398); +#194397 = CARTESIAN_POINT('',(184.962514,-83.618369,1.585)); +#194398 = VECTOR('',#194399,1.); +#194399 = DIRECTION('',(0.,1.,0.)); +#194400 = ORIENTED_EDGE('',*,*,#194401,.T.); +#194401 = EDGE_CURVE('',#194394,#194402,#194404,.T.); +#194402 = VERTEX_POINT('',#194403); +#194403 = CARTESIAN_POINT('',(184.972013,-82.938192,1.585)); +#194404 = LINE('',#194405,#194406); +#194405 = CARTESIAN_POINT('',(184.962514,-82.965925,1.585)); +#194406 = VECTOR('',#194407,1.); +#194407 = DIRECTION('',(0.324035635352,0.946044875797,0.)); +#194408 = ORIENTED_EDGE('',*,*,#194409,.T.); +#194409 = EDGE_CURVE('',#194402,#194410,#194412,.T.); +#194410 = VERTEX_POINT('',#194411); +#194411 = CARTESIAN_POINT('',(185.061884,-82.765659,1.585)); +#194412 = LINE('',#194413,#194414); +#194413 = CARTESIAN_POINT('',(184.972013,-82.938192,1.585)); +#194414 = VECTOR('',#194415,1.); +#194415 = DIRECTION('',(0.461975106506,0.886892891486,0.)); +#194416 = ORIENTED_EDGE('',*,*,#194417,.T.); +#194417 = EDGE_CURVE('',#194410,#194286,#194418,.T.); +#194418 = LINE('',#194419,#194420); +#194419 = CARTESIAN_POINT('',(185.061884,-82.765659,1.585)); +#194420 = VECTOR('',#194421,1.); +#194421 = DIRECTION('',(0.717700626174,0.696351786951,0.)); +#194422 = FACE_BOUND('',#194423,.F.); +#194423 = EDGE_LOOP('',(#194424,#194435,#194443,#194451,#194459,#194467, + #194475,#194483)); +#194424 = ORIENTED_EDGE('',*,*,#194425,.T.); +#194425 = EDGE_CURVE('',#194426,#194428,#194430,.T.); +#194426 = VERTEX_POINT('',#194427); +#194427 = CARTESIAN_POINT('',(185.690955,-82.849218,1.585)); +#194428 = VERTEX_POINT('',#194429); +#194429 = CARTESIAN_POINT('',(185.287938,-82.849218,1.585)); +#194430 = CIRCLE('',#194431,0.330157797413); +#194431 = AXIS2_PLACEMENT_3D('',#194432,#194433,#194434); +#194432 = CARTESIAN_POINT('',(185.4894465,-83.11074906052,1.585)); +#194433 = DIRECTION('',(0.,0.,1.)); +#194434 = DIRECTION('',(0.610339969491,0.792139584696,-0.)); +#194435 = ORIENTED_EDGE('',*,*,#194436,.T.); +#194436 = EDGE_CURVE('',#194428,#194437,#194439,.T.); +#194437 = VERTEX_POINT('',#194438); +#194438 = CARTESIAN_POINT('',(185.236993,-82.900163,1.585)); +#194439 = LINE('',#194440,#194441); +#194440 = CARTESIAN_POINT('',(185.287938,-82.849218,1.585)); +#194441 = VECTOR('',#194442,1.); +#194442 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#194443 = ORIENTED_EDGE('',*,*,#194444,.T.); +#194444 = EDGE_CURVE('',#194437,#194445,#194447,.T.); +#194445 = VERTEX_POINT('',#194446); +#194446 = CARTESIAN_POINT('',(185.1804,-83.013351,1.585)); +#194447 = LINE('',#194448,#194449); +#194448 = CARTESIAN_POINT('',(185.236993,-82.900163,1.585)); +#194449 = VECTOR('',#194450,1.); +#194450 = DIRECTION('',(-0.447207273756,-0.894430351844,0.)); +#194451 = ORIENTED_EDGE('',*,*,#194452,.T.); +#194452 = EDGE_CURVE('',#194445,#194453,#194455,.T.); +#194453 = VERTEX_POINT('',#194454); +#194454 = CARTESIAN_POINT('',(185.1804,-83.486909,1.585)); +#194455 = LINE('',#194456,#194457); +#194456 = CARTESIAN_POINT('',(185.1804,-83.013351,1.585)); +#194457 = VECTOR('',#194458,1.); +#194458 = DIRECTION('',(0.,-1.,0.)); +#194459 = ORIENTED_EDGE('',*,*,#194460,.T.); +#194460 = EDGE_CURVE('',#194453,#194461,#194463,.T.); +#194461 = VERTEX_POINT('',#194462); +#194462 = CARTESIAN_POINT('',(185.798495,-83.486909,1.585)); +#194463 = LINE('',#194464,#194465); +#194464 = CARTESIAN_POINT('',(185.1804,-83.486909,1.585)); +#194465 = VECTOR('',#194466,1.); +#194466 = DIRECTION('',(1.,0.,0.)); +#194467 = ORIENTED_EDGE('',*,*,#194468,.T.); +#194468 = EDGE_CURVE('',#194461,#194469,#194471,.T.); +#194469 = VERTEX_POINT('',#194470); +#194470 = CARTESIAN_POINT('',(185.798495,-83.013351,1.585)); +#194471 = LINE('',#194472,#194473); +#194472 = CARTESIAN_POINT('',(185.798495,-83.486909,1.585)); +#194473 = VECTOR('',#194474,1.); +#194474 = DIRECTION('',(0.,1.,0.)); +#194475 = ORIENTED_EDGE('',*,*,#194476,.T.); +#194476 = EDGE_CURVE('',#194469,#194477,#194479,.T.); +#194477 = VERTEX_POINT('',#194478); +#194478 = CARTESIAN_POINT('',(185.741901,-82.900164,1.585)); +#194479 = LINE('',#194480,#194481); +#194480 = CARTESIAN_POINT('',(185.798495,-83.013351,1.585)); +#194481 = VECTOR('',#194482,1.); +#194482 = DIRECTION('',(-0.447216756375,0.894425610556,0.)); +#194483 = ORIENTED_EDGE('',*,*,#194484,.T.); +#194484 = EDGE_CURVE('',#194477,#194426,#194485,.T.); +#194485 = LINE('',#194486,#194487); +#194486 = CARTESIAN_POINT('',(185.741901,-82.900164,1.585)); +#194487 = VECTOR('',#194488,1.); +#194488 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#194489 = PLANE('',#194490); +#194490 = AXIS2_PLACEMENT_3D('',#194491,#194492,#194493); +#194491 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194492 = DIRECTION('',(0.,0.,1.)); +#194493 = DIRECTION('',(1.,0.,-0.)); +#194494 = SHELL_BASED_SURFACE_MODEL('',(#194495)); +#194495 = OPEN_SHELL('',(#194496)); +#194496 = ADVANCED_FACE('',(#194497,#194608),#194660,.T.); +#194497 = FACE_BOUND('',#194498,.F.); +#194498 = EDGE_LOOP('',(#194499,#194510,#194518,#194527,#194535,#194544, + #194552,#194560,#194569,#194577,#194585,#194593,#194602)); +#194499 = ORIENTED_EDGE('',*,*,#194500,.T.); +#194500 = EDGE_CURVE('',#194501,#194503,#194505,.T.); +#194501 = VERTEX_POINT('',#194502); +#194502 = CARTESIAN_POINT('',(200.905012,-82.460187,1.585)); +#194503 = VERTEX_POINT('',#194504); +#194504 = CARTESIAN_POINT('',(200.978571,-82.399819,1.585)); +#194505 = CIRCLE('',#194506,7.500074938985E-02); +#194506 = AXIS2_PLACEMENT_3D('',#194507,#194508,#194509); +#194507 = CARTESIAN_POINT('',(200.97857146611,-82.47481974938,1.585)); +#194508 = DIRECTION('',(0.,0.,-1.)); +#194509 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#194510 = ORIENTED_EDGE('',*,*,#194511,.T.); +#194511 = EDGE_CURVE('',#194503,#194512,#194514,.T.); +#194512 = VERTEX_POINT('',#194513); +#194513 = CARTESIAN_POINT('',(201.374155,-82.40126,1.585)); +#194514 = LINE('',#194515,#194516); +#194515 = CARTESIAN_POINT('',(200.978571,-82.399819,1.585)); +#194516 = VECTOR('',#194517,1.); +#194517 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#194518 = ORIENTED_EDGE('',*,*,#194519,.T.); +#194519 = EDGE_CURVE('',#194512,#194520,#194522,.T.); +#194520 = VERTEX_POINT('',#194521); +#194521 = CARTESIAN_POINT('',(201.623558,-82.650663,1.585)); +#194522 = CIRCLE('',#194523,0.347870264855); +#194523 = AXIS2_PLACEMENT_3D('',#194524,#194525,#194526); +#194524 = CARTESIAN_POINT('',(201.28682726502,-82.73799073497,1.585)); +#194525 = DIRECTION('',(0.,0.,-1.)); +#194526 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#194527 = ORIENTED_EDGE('',*,*,#194528,.T.); +#194528 = EDGE_CURVE('',#194520,#194529,#194531,.T.); +#194529 = VERTEX_POINT('',#194530); +#194530 = CARTESIAN_POINT('',(201.622336,-82.827962,1.585)); +#194531 = LINE('',#194532,#194533); +#194532 = CARTESIAN_POINT('',(201.623558,-82.650663,1.585)); +#194533 = VECTOR('',#194534,1.); +#194534 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#194535 = ORIENTED_EDGE('',*,*,#194536,.T.); +#194536 = EDGE_CURVE('',#194529,#194537,#194539,.T.); +#194537 = VERTEX_POINT('',#194538); +#194538 = CARTESIAN_POINT('',(201.374155,-83.072187,1.585)); +#194539 = CIRCLE('',#194540,0.348632345848); +#194540 = AXIS2_PLACEMENT_3D('',#194541,#194542,#194543); +#194541 = CARTESIAN_POINT('',(201.28638619403,-82.7347834593,1.585)); +#194542 = DIRECTION('',(0.,0.,-1.)); +#194543 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#194544 = ORIENTED_EDGE('',*,*,#194545,.T.); +#194545 = EDGE_CURVE('',#194537,#194546,#194548,.T.); +#194546 = VERTEX_POINT('',#194547); +#194547 = CARTESIAN_POINT('',(201.360638,-83.073518,1.585)); +#194548 = LINE('',#194549,#194550); +#194549 = CARTESIAN_POINT('',(201.374155,-83.072187,1.585)); +#194550 = VECTOR('',#194551,1.); +#194551 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#194552 = ORIENTED_EDGE('',*,*,#194553,.T.); +#194553 = EDGE_CURVE('',#194546,#194554,#194556,.T.); +#194554 = VERTEX_POINT('',#194555); +#194555 = CARTESIAN_POINT('',(201.618652,-83.444623,1.585)); +#194556 = LINE('',#194557,#194558); +#194557 = CARTESIAN_POINT('',(201.360638,-83.073518,1.585)); +#194558 = VECTOR('',#194559,1.); +#194559 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#194560 = ORIENTED_EDGE('',*,*,#194561,.T.); +#194561 = EDGE_CURVE('',#194554,#194562,#194564,.T.); +#194562 = VERTEX_POINT('',#194563); +#194563 = CARTESIAN_POINT('',(201.488557,-83.517829,1.585)); +#194564 = CIRCLE('',#194565,7.500005951703E-02); +#194565 = AXIS2_PLACEMENT_3D('',#194566,#194567,#194568); +#194566 = CARTESIAN_POINT('',(201.54999906294,-83.47481874739,1.585)); +#194567 = DIRECTION('',(0.,0.,-1.)); +#194568 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#194569 = ORIENTED_EDGE('',*,*,#194570,.T.); +#194570 = EDGE_CURVE('',#194562,#194571,#194573,.T.); +#194571 = VERTEX_POINT('',#194572); +#194572 = CARTESIAN_POINT('',(201.177617,-83.073628,1.585)); +#194573 = LINE('',#194574,#194575); +#194574 = CARTESIAN_POINT('',(201.488557,-83.517829,1.585)); +#194575 = VECTOR('',#194576,1.); +#194576 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#194577 = ORIENTED_EDGE('',*,*,#194578,.T.); +#194578 = EDGE_CURVE('',#194571,#194579,#194581,.T.); +#194579 = VERTEX_POINT('',#194580); +#194580 = CARTESIAN_POINT('',(201.053571,-83.073628,1.585)); +#194581 = LINE('',#194582,#194583); +#194582 = CARTESIAN_POINT('',(201.177617,-83.073628,1.585)); +#194583 = VECTOR('',#194584,1.); +#194584 = DIRECTION('',(-1.,0.,0.)); +#194585 = ORIENTED_EDGE('',*,*,#194586,.T.); +#194586 = EDGE_CURVE('',#194579,#194587,#194589,.T.); +#194587 = VERTEX_POINT('',#194588); +#194588 = CARTESIAN_POINT('',(201.05213,-83.489451,1.585)); +#194589 = LINE('',#194590,#194591); +#194590 = CARTESIAN_POINT('',(201.053571,-83.073628,1.585)); +#194591 = VECTOR('',#194592,1.); +#194592 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#194593 = ORIENTED_EDGE('',*,*,#194594,.T.); +#194594 = EDGE_CURVE('',#194587,#194595,#194597,.T.); +#194595 = VERTEX_POINT('',#194596); +#194596 = CARTESIAN_POINT('',(200.903571,-83.474819,1.585)); +#194597 = CIRCLE('',#194598,7.500006711465E-02); +#194598 = AXIS2_PLACEMENT_3D('',#194599,#194600,#194601); +#194599 = CARTESIAN_POINT('',(200.97857106711,-83.47481906711,1.585)); +#194600 = DIRECTION('',(-0.,0.,-1.)); +#194601 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#194602 = ORIENTED_EDGE('',*,*,#194603,.T.); +#194603 = EDGE_CURVE('',#194595,#194501,#194604,.T.); +#194604 = LINE('',#194605,#194606); +#194605 = CARTESIAN_POINT('',(200.903571,-83.474819,1.585)); +#194606 = VECTOR('',#194607,1.); +#194607 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#194608 = FACE_BOUND('',#194609,.F.); +#194609 = EDGE_LOOP('',(#194610,#194621,#194629,#194637,#194645,#194654) + ); +#194610 = ORIENTED_EDGE('',*,*,#194611,.T.); +#194611 = EDGE_CURVE('',#194612,#194614,#194616,.T.); +#194612 = VERTEX_POINT('',#194613); +#194613 = CARTESIAN_POINT('',(201.474999,-82.683,1.585)); +#194614 = VERTEX_POINT('',#194615); +#194615 = CARTESIAN_POINT('',(201.341818,-82.549819,1.585)); +#194616 = CIRCLE('',#194617,0.18686440374); +#194617 = AXIS2_PLACEMENT_3D('',#194618,#194619,#194620); +#194618 = CARTESIAN_POINT('',(201.294282,-82.730536,1.585)); +#194619 = DIRECTION('',(0.,0.,1.)); +#194620 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#194621 = ORIENTED_EDGE('',*,*,#194622,.T.); +#194622 = EDGE_CURVE('',#194614,#194623,#194625,.T.); +#194623 = VERTEX_POINT('',#194624); +#194624 = CARTESIAN_POINT('',(201.053571,-82.549819,1.585)); +#194625 = LINE('',#194626,#194627); +#194626 = CARTESIAN_POINT('',(201.341818,-82.549819,1.585)); +#194627 = VECTOR('',#194628,1.); +#194628 = DIRECTION('',(-1.,0.,0.)); +#194629 = ORIENTED_EDGE('',*,*,#194630,.T.); +#194630 = EDGE_CURVE('',#194623,#194631,#194633,.T.); +#194631 = VERTEX_POINT('',#194632); +#194632 = CARTESIAN_POINT('',(201.053571,-82.923628,1.585)); +#194633 = LINE('',#194634,#194635); +#194634 = CARTESIAN_POINT('',(201.053571,-82.549819,1.585)); +#194635 = VECTOR('',#194636,1.); +#194636 = DIRECTION('',(0.,-1.,0.)); +#194637 = ORIENTED_EDGE('',*,*,#194638,.T.); +#194638 = EDGE_CURVE('',#194631,#194639,#194641,.T.); +#194639 = VERTEX_POINT('',#194640); +#194640 = CARTESIAN_POINT('',(201.341818,-82.923628,1.585)); +#194641 = LINE('',#194642,#194643); +#194642 = CARTESIAN_POINT('',(201.053571,-82.923628,1.585)); +#194643 = VECTOR('',#194644,1.); +#194644 = DIRECTION('',(1.,0.,0.)); +#194645 = ORIENTED_EDGE('',*,*,#194646,.T.); +#194646 = EDGE_CURVE('',#194639,#194647,#194649,.T.); +#194647 = VERTEX_POINT('',#194648); +#194648 = CARTESIAN_POINT('',(201.474999,-82.790447,1.585)); +#194649 = CIRCLE('',#194650,0.18686440374); +#194650 = AXIS2_PLACEMENT_3D('',#194651,#194652,#194653); +#194651 = CARTESIAN_POINT('',(201.294282,-82.742911,1.585)); +#194652 = DIRECTION('',(0.,0.,1.)); +#194653 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#194654 = ORIENTED_EDGE('',*,*,#194655,.T.); +#194655 = EDGE_CURVE('',#194647,#194612,#194656,.T.); +#194656 = LINE('',#194657,#194658); +#194657 = CARTESIAN_POINT('',(201.474999,-82.790447,1.585)); +#194658 = VECTOR('',#194659,1.); +#194659 = DIRECTION('',(0.,1.,0.)); +#194660 = PLANE('',#194661); +#194661 = AXIS2_PLACEMENT_3D('',#194662,#194663,#194664); +#194662 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194663 = DIRECTION('',(0.,0.,1.)); +#194664 = DIRECTION('',(1.,0.,-0.)); +#194665 = SHELL_BASED_SURFACE_MODEL('',(#194666)); +#194666 = OPEN_SHELL('',(#194667)); +#194667 = ADVANCED_FACE('',(#194668),#194760,.T.); +#194668 = FACE_BOUND('',#194669,.F.); +#194669 = EDGE_LOOP('',(#194670,#194681,#194689,#194697,#194705,#194714, + #194722,#194730,#194738,#194746,#194754)); +#194670 = ORIENTED_EDGE('',*,*,#194671,.T.); +#194671 = EDGE_CURVE('',#194672,#194674,#194676,.T.); +#194672 = VERTEX_POINT('',#194673); +#194673 = CARTESIAN_POINT('',(203.270236,-82.412459,1.585)); +#194674 = VERTEX_POINT('',#194675); +#194675 = CARTESIAN_POINT('',(203.386904,-82.474819,1.585)); +#194676 = CIRCLE('',#194677,7.499999999999E-02); +#194677 = AXIS2_PLACEMENT_3D('',#194678,#194679,#194680); +#194678 = CARTESIAN_POINT('',(203.311904,-82.47481906555,1.585)); +#194679 = DIRECTION('',(0.,0.,-1.)); +#194680 = DIRECTION('',(-0.555573333334,0.831467540731,0.)); +#194681 = ORIENTED_EDGE('',*,*,#194682,.T.); +#194682 = EDGE_CURVE('',#194674,#194683,#194685,.T.); +#194683 = VERTEX_POINT('',#194684); +#194684 = CARTESIAN_POINT('',(203.386904,-83.314256,1.585)); +#194685 = LINE('',#194686,#194687); +#194686 = CARTESIAN_POINT('',(203.386904,-82.474819,1.585)); +#194687 = VECTOR('',#194688,1.); +#194688 = DIRECTION('',(0.,-1.,0.)); +#194689 = ORIENTED_EDGE('',*,*,#194690,.T.); +#194690 = EDGE_CURVE('',#194683,#194691,#194693,.T.); +#194691 = VERTEX_POINT('',#194692); +#194692 = CARTESIAN_POINT('',(203.415424,-83.371298,1.585)); +#194693 = LINE('',#194694,#194695); +#194694 = CARTESIAN_POINT('',(203.386904,-83.314256,1.585)); +#194695 = VECTOR('',#194696,1.); +#194696 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#194697 = ORIENTED_EDGE('',*,*,#194698,.T.); +#194698 = EDGE_CURVE('',#194691,#194699,#194701,.T.); +#194699 = VERTEX_POINT('',#194700); +#194700 = CARTESIAN_POINT('',(203.500745,-83.415569,1.585)); +#194701 = LINE('',#194702,#194703); +#194702 = CARTESIAN_POINT('',(203.415424,-83.371298,1.585)); +#194703 = VECTOR('',#194704,1.); +#194704 = DIRECTION('',(0.887624909794,-0.460567062992,0.)); +#194705 = ORIENTED_EDGE('',*,*,#194706,.T.); +#194706 = EDGE_CURVE('',#194699,#194707,#194709,.T.); +#194707 = VERTEX_POINT('',#194708); +#194708 = CARTESIAN_POINT('',(203.42122,-83.541901,1.585)); +#194709 = CIRCLE('',#194710,7.500029440361E-02); +#194710 = AXIS2_PLACEMENT_3D('',#194711,#194712,#194713); +#194711 = CARTESIAN_POINT('',(203.45476105397,-83.47481864867,1.585)); +#194712 = DIRECTION('',(0.,0.,-1.)); +#194713 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#194714 = ORIENTED_EDGE('',*,*,#194715,.T.); +#194715 = EDGE_CURVE('',#194707,#194716,#194718,.T.); +#194716 = VERTEX_POINT('',#194717); +#194717 = CARTESIAN_POINT('',(203.313539,-83.48645,1.585)); +#194718 = LINE('',#194719,#194720); +#194719 = CARTESIAN_POINT('',(203.42122,-83.541901,1.585)); +#194720 = VECTOR('',#194721,1.); +#194721 = DIRECTION('',(-0.889045233553,0.457819366887,0.)); +#194722 = ORIENTED_EDGE('',*,*,#194723,.T.); +#194723 = EDGE_CURVE('',#194716,#194724,#194726,.T.); +#194724 = VERTEX_POINT('',#194725); +#194725 = CARTESIAN_POINT('',(203.292441,-83.460741,1.585)); +#194726 = LINE('',#194727,#194728); +#194727 = CARTESIAN_POINT('',(203.313539,-83.48645,1.585)); +#194728 = VECTOR('',#194729,1.); +#194729 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#194730 = ORIENTED_EDGE('',*,*,#194731,.T.); +#194731 = EDGE_CURVE('',#194724,#194732,#194734,.T.); +#194732 = VERTEX_POINT('',#194733); +#194733 = CARTESIAN_POINT('',(203.238345,-83.346593,1.585)); +#194734 = LINE('',#194735,#194736); +#194735 = CARTESIAN_POINT('',(203.292441,-83.460741,1.585)); +#194736 = VECTOR('',#194737,1.); +#194737 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#194738 = ORIENTED_EDGE('',*,*,#194739,.T.); +#194739 = EDGE_CURVE('',#194732,#194740,#194742,.T.); +#194740 = VERTEX_POINT('',#194741); +#194741 = CARTESIAN_POINT('',(203.238345,-82.460187,1.585)); +#194742 = LINE('',#194743,#194744); +#194743 = CARTESIAN_POINT('',(203.238345,-83.346593,1.585)); +#194744 = VECTOR('',#194745,1.); +#194745 = DIRECTION('',(0.,1.,0.)); +#194746 = ORIENTED_EDGE('',*,*,#194747,.T.); +#194747 = EDGE_CURVE('',#194740,#194748,#194750,.T.); +#194748 = VERTEX_POINT('',#194749); +#194749 = CARTESIAN_POINT('',(203.249544,-82.433151,1.585)); +#194750 = LINE('',#194751,#194752); +#194751 = CARTESIAN_POINT('',(203.238345,-82.460187,1.585)); +#194752 = VECTOR('',#194753,1.); +#194753 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#194754 = ORIENTED_EDGE('',*,*,#194755,.T.); +#194755 = EDGE_CURVE('',#194748,#194672,#194756,.T.); +#194756 = LINE('',#194757,#194758); +#194757 = CARTESIAN_POINT('',(203.249544,-82.433151,1.585)); +#194758 = VECTOR('',#194759,1.); +#194759 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#194760 = PLANE('',#194761); +#194761 = AXIS2_PLACEMENT_3D('',#194762,#194763,#194764); +#194762 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194763 = DIRECTION('',(0.,0.,1.)); +#194764 = DIRECTION('',(1.,0.,-0.)); +#194765 = SHELL_BASED_SURFACE_MODEL('',(#194766)); +#194766 = OPEN_SHELL('',(#194767)); +#194767 = ADVANCED_FACE('',(#194768),#194985,.T.); +#194768 = FACE_BOUND('',#194769,.F.); +#194769 = EDGE_LOOP('',(#194770,#194781,#194789,#194797,#194805,#194814, + #194822,#194831,#194839,#194848,#194856,#194864,#194873,#194881, + #194889,#194898,#194906,#194914,#194922,#194930,#194938,#194946, + #194954,#194963,#194971,#194979)); +#194770 = ORIENTED_EDGE('',*,*,#194771,.T.); +#194771 = EDGE_CURVE('',#194772,#194774,#194776,.T.); +#194772 = VERTEX_POINT('',#194773); +#194773 = CARTESIAN_POINT('',(201.936903,-82.745792,1.585)); +#194774 = VERTEX_POINT('',#194775); +#194775 = CARTESIAN_POINT('',(202.03964,-82.765193,1.585)); +#194776 = CIRCLE('',#194777,7.440760172328E-02); +#194777 = AXIS2_PLACEMENT_3D('',#194778,#194779,#194780); +#194778 = CARTESIAN_POINT('',(201.97844606572,-82.80752258305,1.585)); +#194779 = DIRECTION('',(0.,0.,-1.)); +#194780 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#194781 = ORIENTED_EDGE('',*,*,#194782,.T.); +#194782 = EDGE_CURVE('',#194774,#194783,#194785,.T.); +#194783 = VERTEX_POINT('',#194784); +#194784 = CARTESIAN_POINT('',(202.106796,-82.734593,1.585)); +#194785 = LINE('',#194786,#194787); +#194786 = CARTESIAN_POINT('',(202.03964,-82.765193,1.585)); +#194787 = VECTOR('',#194788,1.); +#194788 = DIRECTION('',(0.90998556975,0.414639919506,0.)); +#194789 = ORIENTED_EDGE('',*,*,#194790,.T.); +#194790 = EDGE_CURVE('',#194783,#194791,#194793,.T.); +#194791 = VERTEX_POINT('',#194792); +#194792 = CARTESIAN_POINT('',(202.278917,-82.734593,1.585)); +#194793 = LINE('',#194794,#194795); +#194794 = CARTESIAN_POINT('',(202.106796,-82.734593,1.585)); +#194795 = VECTOR('',#194796,1.); +#194796 = DIRECTION('',(1.,0.,0.)); +#194797 = ORIENTED_EDGE('',*,*,#194798,.T.); +#194798 = EDGE_CURVE('',#194791,#194799,#194801,.T.); +#194799 = VERTEX_POINT('',#194800); +#194800 = CARTESIAN_POINT('',(202.408777,-82.796521,1.585)); +#194801 = LINE('',#194802,#194803); +#194802 = CARTESIAN_POINT('',(202.278917,-82.734593,1.585)); +#194803 = VECTOR('',#194804,1.); +#194804 = DIRECTION('',(0.902617807283,-0.430442904431,0.)); +#194805 = ORIENTED_EDGE('',*,*,#194806,.T.); +#194806 = EDGE_CURVE('',#194799,#194807,#194809,.T.); +#194807 = VERTEX_POINT('',#194808); +#194808 = CARTESIAN_POINT('',(202.834078,-82.796521,1.585)); +#194809 = CIRCLE('',#194810,0.347106732746); +#194810 = AXIS2_PLACEMENT_3D('',#194811,#194812,#194813); +#194811 = CARTESIAN_POINT('',(202.6214275,-83.07086175302,1.585)); +#194812 = DIRECTION('',(0.,0.,-1.)); +#194813 = DIRECTION('',(-0.612637209073,0.790364251506,0.)); +#194814 = ORIENTED_EDGE('',*,*,#194815,.T.); +#194815 = EDGE_CURVE('',#194807,#194816,#194818,.T.); +#194816 = VERTEX_POINT('',#194817); +#194817 = CARTESIAN_POINT('',(202.855177,-82.82223,1.585)); +#194818 = LINE('',#194819,#194820); +#194819 = CARTESIAN_POINT('',(202.834078,-82.796521,1.585)); +#194820 = VECTOR('',#194821,1.); +#194821 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#194822 = ORIENTED_EDGE('',*,*,#194823,.T.); +#194823 = EDGE_CURVE('',#194816,#194824,#194826,.T.); +#194824 = VERTEX_POINT('',#194825); +#194825 = CARTESIAN_POINT('',(202.898074,-83.516487,1.585)); +#194826 = CIRCLE('',#194827,0.780466291444); +#194827 = AXIS2_PLACEMENT_3D('',#194828,#194829,#194830); +#194828 = CARTESIAN_POINT('',(202.1792642213,-83.21244730828,1.585)); +#194829 = DIRECTION('',(0.,0.,-1.)); +#194830 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#194831 = ORIENTED_EDGE('',*,*,#194832,.T.); +#194832 = EDGE_CURVE('',#194824,#194833,#194835,.T.); +#194833 = VERTEX_POINT('',#194834); +#194834 = CARTESIAN_POINT('',(202.877382,-83.537179,1.585)); +#194835 = LINE('',#194836,#194837); +#194836 = CARTESIAN_POINT('',(202.898074,-83.516487,1.585)); +#194837 = VECTOR('',#194838,1.); +#194838 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194839 = ORIENTED_EDGE('',*,*,#194840,.T.); +#194840 = EDGE_CURVE('',#194833,#194841,#194843,.T.); +#194841 = VERTEX_POINT('',#194842); +#194842 = CARTESIAN_POINT('',(202.760714,-83.474819,1.585)); +#194843 = CIRCLE('',#194844,7.49997958033E-02); +#194844 = AXIS2_PLACEMENT_3D('',#194845,#194846,#194847); +#194845 = CARTESIAN_POINT('',(202.8357137958,-83.47481931647,1.585)); +#194846 = DIRECTION('',(-0.,0.,-1.)); +#194847 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#194848 = ORIENTED_EDGE('',*,*,#194849,.T.); +#194849 = EDGE_CURVE('',#194841,#194850,#194852,.T.); +#194850 = VERTEX_POINT('',#194851); +#194851 = CARTESIAN_POINT('',(202.760714,-82.968714,1.585)); +#194852 = LINE('',#194853,#194854); +#194853 = CARTESIAN_POINT('',(202.760714,-83.474819,1.585)); +#194854 = VECTOR('',#194855,1.); +#194855 = DIRECTION('',(0.,1.,0.)); +#194856 = ORIENTED_EDGE('',*,*,#194857,.T.); +#194857 = EDGE_CURVE('',#194850,#194858,#194860,.T.); +#194858 = VERTEX_POINT('',#194859); +#194859 = CARTESIAN_POINT('',(202.732193,-82.911672,1.585)); +#194860 = LINE('',#194861,#194862); +#194861 = CARTESIAN_POINT('',(202.760714,-82.968714,1.585)); +#194862 = VECTOR('',#194863,1.); +#194863 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#194864 = ORIENTED_EDGE('',*,*,#194865,.T.); +#194865 = EDGE_CURVE('',#194858,#194866,#194868,.T.); +#194866 = VERTEX_POINT('',#194867); +#194867 = CARTESIAN_POINT('',(202.510662,-82.911672,1.585)); +#194868 = CIRCLE('',#194869,0.186653372204); +#194869 = AXIS2_PLACEMENT_3D('',#194870,#194871,#194872); +#194870 = CARTESIAN_POINT('',(202.6214275,-83.06190676749,1.585)); +#194871 = DIRECTION('',(0.,0.,1.)); +#194872 = DIRECTION('',(0.593428871348,0.804886435872,-0.)); +#194873 = ORIENTED_EDGE('',*,*,#194874,.T.); +#194874 = EDGE_CURVE('',#194866,#194875,#194877,.T.); +#194875 = VERTEX_POINT('',#194876); +#194876 = CARTESIAN_POINT('',(202.482142,-82.968714,1.585)); +#194877 = LINE('',#194878,#194879); +#194878 = CARTESIAN_POINT('',(202.510662,-82.911672,1.585)); +#194879 = VECTOR('',#194880,1.); +#194880 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#194881 = ORIENTED_EDGE('',*,*,#194882,.T.); +#194882 = EDGE_CURVE('',#194875,#194883,#194885,.T.); +#194883 = VERTEX_POINT('',#194884); +#194884 = CARTESIAN_POINT('',(202.480701,-83.489451,1.585)); +#194885 = LINE('',#194886,#194887); +#194886 = CARTESIAN_POINT('',(202.482142,-82.968714,1.585)); +#194887 = VECTOR('',#194888,1.); +#194888 = DIRECTION('',(-2.767221232121E-03,-0.999996171236,0.)); +#194889 = ORIENTED_EDGE('',*,*,#194890,.T.); +#194890 = EDGE_CURVE('',#194883,#194891,#194893,.T.); +#194891 = VERTEX_POINT('',#194892); +#194892 = CARTESIAN_POINT('',(202.332142,-83.474819,1.585)); +#194893 = CIRCLE('',#194894,7.500006711464E-02); +#194894 = AXIS2_PLACEMENT_3D('',#194895,#194896,#194897); +#194895 = CARTESIAN_POINT('',(202.40714206711,-83.47481906711,1.585)); +#194896 = DIRECTION('',(-0.,0.,-1.)); +#194897 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#194898 = ORIENTED_EDGE('',*,*,#194899,.T.); +#194899 = EDGE_CURVE('',#194891,#194900,#194902,.T.); +#194900 = VERTEX_POINT('',#194901); +#194901 = CARTESIAN_POINT('',(202.332142,-82.968714,1.585)); +#194902 = LINE('',#194903,#194904); +#194903 = CARTESIAN_POINT('',(202.332142,-83.474819,1.585)); +#194904 = VECTOR('',#194905,1.); +#194905 = DIRECTION('',(0.,1.,0.)); +#194906 = ORIENTED_EDGE('',*,*,#194907,.T.); +#194907 = EDGE_CURVE('',#194900,#194908,#194910,.T.); +#194908 = VERTEX_POINT('',#194909); +#194909 = CARTESIAN_POINT('',(202.303621,-82.911672,1.585)); +#194910 = LINE('',#194911,#194912); +#194911 = CARTESIAN_POINT('',(202.332142,-82.968714,1.585)); +#194912 = VECTOR('',#194913,1.); +#194913 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#194914 = ORIENTED_EDGE('',*,*,#194915,.T.); +#194915 = EDGE_CURVE('',#194908,#194916,#194918,.T.); +#194916 = VERTEX_POINT('',#194917); +#194917 = CARTESIAN_POINT('',(202.24658,-82.883152,1.585)); +#194918 = LINE('',#194919,#194920); +#194919 = CARTESIAN_POINT('',(202.303621,-82.911672,1.585)); +#194920 = VECTOR('',#194921,1.); +#194921 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#194922 = ORIENTED_EDGE('',*,*,#194923,.T.); +#194923 = EDGE_CURVE('',#194916,#194924,#194926,.T.); +#194924 = VERTEX_POINT('',#194925); +#194925 = CARTESIAN_POINT('',(202.139133,-82.883152,1.585)); +#194926 = LINE('',#194927,#194928); +#194927 = CARTESIAN_POINT('',(202.24658,-82.883152,1.585)); +#194928 = VECTOR('',#194929,1.); +#194929 = DIRECTION('',(-1.,0.,0.)); +#194930 = ORIENTED_EDGE('',*,*,#194931,.T.); +#194931 = EDGE_CURVE('',#194924,#194932,#194934,.T.); +#194932 = VERTEX_POINT('',#194933); +#194933 = CARTESIAN_POINT('',(202.070617,-82.91741,1.585)); +#194934 = LINE('',#194935,#194936); +#194935 = CARTESIAN_POINT('',(202.139133,-82.883152,1.585)); +#194936 = VECTOR('',#194937,1.); +#194937 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#194938 = ORIENTED_EDGE('',*,*,#194939,.T.); +#194939 = EDGE_CURVE('',#194932,#194940,#194942,.T.); +#194940 = VERTEX_POINT('',#194941); +#194941 = CARTESIAN_POINT('',(202.053571,-82.934456,1.585)); +#194942 = LINE('',#194943,#194944); +#194943 = CARTESIAN_POINT('',(202.070617,-82.91741,1.585)); +#194944 = VECTOR('',#194945,1.); +#194945 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194946 = ORIENTED_EDGE('',*,*,#194947,.T.); +#194947 = EDGE_CURVE('',#194940,#194948,#194950,.T.); +#194948 = VERTEX_POINT('',#194949); +#194949 = CARTESIAN_POINT('',(202.05213,-83.489451,1.585)); +#194950 = LINE('',#194951,#194952); +#194951 = CARTESIAN_POINT('',(202.053571,-82.934456,1.585)); +#194952 = VECTOR('',#194953,1.); +#194953 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#194954 = ORIENTED_EDGE('',*,*,#194955,.T.); +#194955 = EDGE_CURVE('',#194948,#194956,#194958,.T.); +#194956 = VERTEX_POINT('',#194957); +#194957 = CARTESIAN_POINT('',(201.903571,-83.474819,1.585)); +#194958 = CIRCLE('',#194959,7.500006711465E-02); +#194959 = AXIS2_PLACEMENT_3D('',#194960,#194961,#194962); +#194960 = CARTESIAN_POINT('',(201.97857106711,-83.47481906711,1.585)); +#194961 = DIRECTION('',(-0.,0.,-1.)); +#194962 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#194963 = ORIENTED_EDGE('',*,*,#194964,.T.); +#194964 = EDGE_CURVE('',#194956,#194965,#194967,.T.); +#194965 = VERTEX_POINT('',#194966); +#194966 = CARTESIAN_POINT('',(201.905012,-82.79352,1.585)); +#194967 = LINE('',#194968,#194969); +#194968 = CARTESIAN_POINT('',(201.903571,-83.474819,1.585)); +#194969 = VECTOR('',#194970,1.); +#194970 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#194971 = ORIENTED_EDGE('',*,*,#194972,.T.); +#194972 = EDGE_CURVE('',#194965,#194973,#194975,.T.); +#194973 = VERTEX_POINT('',#194974); +#194974 = CARTESIAN_POINT('',(201.916211,-82.766484,1.585)); +#194975 = LINE('',#194976,#194977); +#194976 = CARTESIAN_POINT('',(201.905012,-82.79352,1.585)); +#194977 = VECTOR('',#194978,1.); +#194978 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194979 = ORIENTED_EDGE('',*,*,#194980,.T.); +#194980 = EDGE_CURVE('',#194973,#194772,#194981,.T.); +#194981 = LINE('',#194982,#194983); +#194982 = CARTESIAN_POINT('',(201.916211,-82.766484,1.585)); +#194983 = VECTOR('',#194984,1.); +#194984 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#194985 = PLANE('',#194986); +#194986 = AXIS2_PLACEMENT_3D('',#194987,#194988,#194989); +#194987 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194988 = DIRECTION('',(0.,0.,1.)); +#194989 = DIRECTION('',(1.,0.,-0.)); +#194990 = SHELL_BASED_SURFACE_MODEL('',(#194991)); +#194991 = OPEN_SHELL('',(#194992)); +#194992 = ADVANCED_FACE('',(#194993,#195165),#195216,.T.); +#194993 = FACE_BOUND('',#194994,.F.); +#194994 = EDGE_LOOP('',(#194995,#195006,#195014,#195022,#195030,#195038, + #195046,#195054,#195062,#195070,#195078,#195086,#195094,#195103, + #195111,#195119,#195127,#195135,#195143,#195151,#195159)); +#194995 = ORIENTED_EDGE('',*,*,#194996,.T.); +#194996 = EDGE_CURVE('',#194997,#194999,#195001,.T.); +#194997 = VERTEX_POINT('',#194998); +#194998 = CARTESIAN_POINT('',(203.802173,-82.788689,1.585)); +#194999 = VERTEX_POINT('',#195000); +#195000 = CARTESIAN_POINT('',(204.26265,-82.796521,1.585)); +#195001 = CIRCLE('',#195002,0.398777683503); +#195002 = AXIS2_PLACEMENT_3D('',#195003,#195004,#195005); +#195003 = CARTESIAN_POINT('',(204.02687478885,-83.11813208604,1.585)); +#195004 = DIRECTION('',(0.,0.,-1.)); +#195005 = DIRECTION('',(-0.563476338197,0.826132202673,0.)); +#195006 = ORIENTED_EDGE('',*,*,#195007,.T.); +#195007 = EDGE_CURVE('',#194999,#195008,#195010,.T.); +#195008 = VERTEX_POINT('',#195009); +#195009 = CARTESIAN_POINT('',(204.283748,-82.82223,1.585)); +#195010 = LINE('',#195011,#195012); +#195011 = CARTESIAN_POINT('',(204.26265,-82.796521,1.585)); +#195012 = VECTOR('',#195013,1.); +#195013 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#195014 = ORIENTED_EDGE('',*,*,#195015,.T.); +#195015 = EDGE_CURVE('',#195008,#195016,#195018,.T.); +#195016 = VERTEX_POINT('',#195017); +#195017 = CARTESIAN_POINT('',(204.337844,-82.936377,1.585)); +#195018 = LINE('',#195019,#195020); +#195019 = CARTESIAN_POINT('',(204.283748,-82.82223,1.585)); +#195020 = VECTOR('',#195021,1.); +#195021 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#195022 = ORIENTED_EDGE('',*,*,#195023,.T.); +#195023 = EDGE_CURVE('',#195016,#195024,#195026,.T.); +#195024 = VERTEX_POINT('',#195025); +#195025 = CARTESIAN_POINT('',(204.337844,-83.060879,1.585)); +#195026 = LINE('',#195027,#195028); +#195027 = CARTESIAN_POINT('',(204.337844,-82.936377,1.585)); +#195028 = VECTOR('',#195029,1.); +#195029 = DIRECTION('',(0.,-1.,0.)); +#195030 = ORIENTED_EDGE('',*,*,#195031,.T.); +#195031 = EDGE_CURVE('',#195024,#195032,#195034,.T.); +#195032 = VERTEX_POINT('',#195033); +#195033 = CARTESIAN_POINT('',(204.317373,-83.099224,1.585)); +#195034 = LINE('',#195035,#195036); +#195035 = CARTESIAN_POINT('',(204.337844,-83.060879,1.585)); +#195036 = VECTOR('',#195037,1.); +#195037 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#195038 = ORIENTED_EDGE('',*,*,#195039,.T.); +#195039 = EDGE_CURVE('',#195032,#195040,#195042,.T.); +#195040 = VERTEX_POINT('',#195041); +#195041 = CARTESIAN_POINT('',(204.278993,-83.119791,1.585)); +#195042 = LINE('',#195043,#195044); +#195043 = CARTESIAN_POINT('',(204.317373,-83.099224,1.585)); +#195044 = VECTOR('',#195045,1.); +#195045 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#195046 = ORIENTED_EDGE('',*,*,#195047,.T.); +#195047 = EDGE_CURVE('',#195040,#195048,#195050,.T.); +#195048 = VERTEX_POINT('',#195049); +#195049 = CARTESIAN_POINT('',(203.863095,-83.20297,1.585)); +#195050 = LINE('',#195051,#195052); +#195051 = CARTESIAN_POINT('',(204.278993,-83.119791,1.585)); +#195052 = VECTOR('',#195053,1.); +#195053 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#195054 = ORIENTED_EDGE('',*,*,#195055,.T.); +#195055 = EDGE_CURVE('',#195048,#195056,#195058,.T.); +#195056 = VERTEX_POINT('',#195057); +#195057 = CARTESIAN_POINT('',(203.863095,-83.314256,1.585)); +#195058 = LINE('',#195059,#195060); +#195059 = CARTESIAN_POINT('',(203.863095,-83.20297,1.585)); +#195060 = VECTOR('',#195061,1.); +#195061 = DIRECTION('',(0.,-1.,0.)); +#195062 = ORIENTED_EDGE('',*,*,#195063,.T.); +#195063 = EDGE_CURVE('',#195056,#195064,#195066,.T.); +#195064 = VERTEX_POINT('',#195065); +#195065 = CARTESIAN_POINT('',(203.891615,-83.371298,1.585)); +#195066 = LINE('',#195067,#195068); +#195067 = CARTESIAN_POINT('',(203.863095,-83.314256,1.585)); +#195068 = VECTOR('',#195069,1.); +#195069 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#195070 = ORIENTED_EDGE('',*,*,#195071,.T.); +#195071 = EDGE_CURVE('',#195064,#195072,#195074,.T.); +#195072 = VERTEX_POINT('',#195073); +#195073 = CARTESIAN_POINT('',(203.948657,-83.399819,1.585)); +#195074 = LINE('',#195075,#195076); +#195075 = CARTESIAN_POINT('',(203.891615,-83.371298,1.585)); +#195076 = VECTOR('',#195077,1.); +#195077 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#195078 = ORIENTED_EDGE('',*,*,#195079,.T.); +#195079 = EDGE_CURVE('',#195072,#195080,#195082,.T.); +#195080 = VERTEX_POINT('',#195081); +#195081 = CARTESIAN_POINT('',(204.103723,-83.399819,1.585)); +#195082 = LINE('',#195083,#195084); +#195083 = CARTESIAN_POINT('',(203.948657,-83.399819,1.585)); +#195084 = VECTOR('',#195085,1.); +#195085 = DIRECTION('',(1.,0.,0.)); +#195086 = ORIENTED_EDGE('',*,*,#195087,.T.); +#195087 = EDGE_CURVE('',#195080,#195088,#195090,.T.); +#195088 = VERTEX_POINT('',#195089); +#195089 = CARTESIAN_POINT('',(204.196856,-83.354863,1.585)); +#195090 = LINE('',#195091,#195092); +#195091 = CARTESIAN_POINT('',(204.103723,-83.399819,1.585)); +#195092 = VECTOR('',#195093,1.); +#195093 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#195094 = ORIENTED_EDGE('',*,*,#195095,.T.); +#195095 = EDGE_CURVE('',#195088,#195096,#195098,.T.); +#195096 = VERTEX_POINT('',#195097); +#195097 = CARTESIAN_POINT('',(204.250207,-83.494282,1.585)); +#195098 = CIRCLE('',#195099,7.500029440469E-02); +#195099 = AXIS2_PLACEMENT_3D('',#195100,#195101,#195102); +#195100 = CARTESIAN_POINT('',(204.21666535132,-83.42719994603,1.585)); +#195101 = DIRECTION('',(0.,0.,-1.)); +#195102 = DIRECTION('',(-0.264123647521,0.964488827732,-0.)); +#195103 = ORIENTED_EDGE('',*,*,#195104,.T.); +#195104 = EDGE_CURVE('',#195096,#195105,#195107,.T.); +#195105 = VERTEX_POINT('',#195106); +#195106 = CARTESIAN_POINT('',(204.13606,-83.548378,1.585)); +#195107 = LINE('',#195108,#195109); +#195108 = CARTESIAN_POINT('',(204.250207,-83.494282,1.585)); +#195109 = VECTOR('',#195110,1.); +#195110 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#195111 = ORIENTED_EDGE('',*,*,#195112,.T.); +#195112 = EDGE_CURVE('',#195105,#195113,#195115,.T.); +#195113 = VERTEX_POINT('',#195114); +#195114 = CARTESIAN_POINT('',(203.911142,-83.547156,1.585)); +#195115 = LINE('',#195116,#195117); +#195116 = CARTESIAN_POINT('',(204.13606,-83.548378,1.585)); +#195117 = VECTOR('',#195118,1.); +#195118 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#195119 = ORIENTED_EDGE('',*,*,#195120,.T.); +#195120 = EDGE_CURVE('',#195113,#195121,#195123,.T.); +#195121 = VERTEX_POINT('',#195122); +#195122 = CARTESIAN_POINT('',(203.78973,-83.48645,1.585)); +#195123 = LINE('',#195124,#195125); +#195124 = CARTESIAN_POINT('',(203.911142,-83.547156,1.585)); +#195125 = VECTOR('',#195126,1.); +#195126 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#195127 = ORIENTED_EDGE('',*,*,#195128,.T.); +#195128 = EDGE_CURVE('',#195121,#195129,#195131,.T.); +#195129 = VERTEX_POINT('',#195130); +#195130 = CARTESIAN_POINT('',(203.768632,-83.460741,1.585)); +#195131 = LINE('',#195132,#195133); +#195132 = CARTESIAN_POINT('',(203.78973,-83.48645,1.585)); +#195133 = VECTOR('',#195134,1.); +#195134 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#195135 = ORIENTED_EDGE('',*,*,#195136,.T.); +#195136 = EDGE_CURVE('',#195129,#195137,#195139,.T.); +#195137 = VERTEX_POINT('',#195138); +#195138 = CARTESIAN_POINT('',(203.714536,-83.346593,1.585)); +#195139 = LINE('',#195140,#195141); +#195140 = CARTESIAN_POINT('',(203.768632,-83.460741,1.585)); +#195141 = VECTOR('',#195142,1.); +#195142 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#195143 = ORIENTED_EDGE('',*,*,#195144,.T.); +#195144 = EDGE_CURVE('',#195137,#195145,#195147,.T.); +#195145 = VERTEX_POINT('',#195146); +#195146 = CARTESIAN_POINT('',(203.715758,-82.9312,1.585)); +#195147 = LINE('',#195148,#195149); +#195148 = CARTESIAN_POINT('',(203.714536,-83.346593,1.585)); +#195149 = VECTOR('',#195150,1.); +#195150 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#195151 = ORIENTED_EDGE('',*,*,#195152,.T.); +#195152 = EDGE_CURVE('',#195145,#195153,#195155,.T.); +#195153 = VERTEX_POINT('',#195154); +#195154 = CARTESIAN_POINT('',(203.776464,-82.809787,1.585)); +#195155 = LINE('',#195156,#195157); +#195156 = CARTESIAN_POINT('',(203.715758,-82.9312,1.585)); +#195157 = VECTOR('',#195158,1.); +#195158 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#195159 = ORIENTED_EDGE('',*,*,#195160,.T.); +#195160 = EDGE_CURVE('',#195153,#194997,#195161,.T.); +#195161 = LINE('',#195162,#195163); +#195162 = CARTESIAN_POINT('',(203.776464,-82.809787,1.585)); +#195163 = VECTOR('',#195164,1.); +#195164 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#195165 = FACE_BOUND('',#195166,.F.); +#195166 = EDGE_LOOP('',(#195167,#195178,#195186,#195194,#195202,#195210) + ); +#195167 = ORIENTED_EDGE('',*,*,#195168,.T.); +#195168 = EDGE_CURVE('',#195169,#195171,#195173,.T.); +#195169 = VERTEX_POINT('',#195170); +#195170 = CARTESIAN_POINT('',(204.160764,-82.911672,1.585)); +#195171 = VERTEX_POINT('',#195172); +#195172 = CARTESIAN_POINT('',(203.891615,-82.911672,1.585)); +#195173 = CIRCLE('',#195174,0.239283669194); +#195174 = AXIS2_PLACEMENT_3D('',#195175,#195176,#195177); +#195175 = CARTESIAN_POINT('',(204.0261895,-83.10952643713,1.585)); +#195176 = DIRECTION('',(0.,0.,1.)); +#195177 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#195178 = ORIENTED_EDGE('',*,*,#195179,.T.); +#195179 = EDGE_CURVE('',#195171,#195180,#195182,.T.); +#195180 = VERTEX_POINT('',#195181); +#195181 = CARTESIAN_POINT('',(203.863095,-82.968714,1.585)); +#195182 = LINE('',#195183,#195184); +#195183 = CARTESIAN_POINT('',(203.891615,-82.911672,1.585)); +#195184 = VECTOR('',#195185,1.); +#195185 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#195186 = ORIENTED_EDGE('',*,*,#195187,.T.); +#195187 = EDGE_CURVE('',#195180,#195188,#195190,.T.); +#195188 = VERTEX_POINT('',#195189); +#195189 = CARTESIAN_POINT('',(203.863095,-83.049999,1.585)); +#195190 = LINE('',#195191,#195192); +#195191 = CARTESIAN_POINT('',(203.863095,-82.968714,1.585)); +#195192 = VECTOR('',#195193,1.); +#195193 = DIRECTION('',(0.,-1.,0.)); +#195194 = ORIENTED_EDGE('',*,*,#195195,.T.); +#195195 = EDGE_CURVE('',#195188,#195196,#195198,.T.); +#195196 = VERTEX_POINT('',#195197); +#195197 = CARTESIAN_POINT('',(204.189285,-82.984762,1.585)); +#195198 = LINE('',#195199,#195200); +#195199 = CARTESIAN_POINT('',(203.863095,-83.049999,1.585)); +#195200 = VECTOR('',#195201,1.); +#195201 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#195202 = ORIENTED_EDGE('',*,*,#195203,.T.); +#195203 = EDGE_CURVE('',#195196,#195204,#195206,.T.); +#195204 = VERTEX_POINT('',#195205); +#195205 = CARTESIAN_POINT('',(204.189285,-82.968714,1.585)); +#195206 = LINE('',#195207,#195208); +#195207 = CARTESIAN_POINT('',(204.189285,-82.984762,1.585)); +#195208 = VECTOR('',#195209,1.); +#195209 = DIRECTION('',(0.,1.,0.)); +#195210 = ORIENTED_EDGE('',*,*,#195211,.T.); +#195211 = EDGE_CURVE('',#195204,#195169,#195212,.T.); +#195212 = LINE('',#195213,#195214); +#195213 = CARTESIAN_POINT('',(204.189285,-82.968714,1.585)); +#195214 = VECTOR('',#195215,1.); +#195215 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#195216 = PLANE('',#195217); +#195217 = AXIS2_PLACEMENT_3D('',#195218,#195219,#195220); +#195218 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195219 = DIRECTION('',(0.,0.,1.)); +#195220 = DIRECTION('',(1.,0.,-0.)); +#195221 = SHELL_BASED_SURFACE_MODEL('',(#195222)); +#195222 = OPEN_SHELL('',(#195223)); +#195223 = ADVANCED_FACE('',(#195224,#195326),#195394,.T.); +#195224 = FACE_BOUND('',#195225,.F.); +#195225 = EDGE_LOOP('',(#195226,#195237,#195245,#195254,#195262,#195270, + #195279,#195287,#195296,#195304,#195312,#195320)); +#195226 = ORIENTED_EDGE('',*,*,#195227,.T.); +#195227 = EDGE_CURVE('',#195228,#195230,#195232,.T.); +#195228 = VERTEX_POINT('',#195229); +#195229 = CARTESIAN_POINT('',(205.07976,-82.412459,1.585)); +#195230 = VERTEX_POINT('',#195231); +#195231 = CARTESIAN_POINT('',(205.196428,-82.474819,1.585)); +#195232 = CIRCLE('',#195233,7.500000000003E-02); +#195233 = AXIS2_PLACEMENT_3D('',#195234,#195235,#195236); +#195234 = CARTESIAN_POINT('',(205.121428,-82.47481906555,1.585)); +#195235 = DIRECTION('',(0.,0.,-1.)); +#195236 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#195237 = ORIENTED_EDGE('',*,*,#195238,.T.); +#195238 = EDGE_CURVE('',#195230,#195239,#195241,.T.); +#195239 = VERTEX_POINT('',#195240); +#195240 = CARTESIAN_POINT('',(205.194987,-83.489451,1.585)); +#195241 = LINE('',#195242,#195243); +#195242 = CARTESIAN_POINT('',(205.196428,-82.474819,1.585)); +#195243 = VECTOR('',#195244,1.); +#195244 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#195245 = ORIENTED_EDGE('',*,*,#195246,.T.); +#195246 = EDGE_CURVE('',#195239,#195247,#195249,.T.); +#195247 = VERTEX_POINT('',#195248); +#195248 = CARTESIAN_POINT('',(205.076231,-83.53365,1.585)); +#195249 = CIRCLE('',#195250,7.4246560927E-02); +#195250 = AXIS2_PLACEMENT_3D('',#195251,#195252,#195253); +#195251 = CARTESIAN_POINT('',(205.12210685331,-83.47527228256,1.585)); +#195252 = DIRECTION('',(-0.,0.,-1.)); +#195253 = DIRECTION('',(0.981596262232,-0.190968002485,-0.)); +#195254 = ORIENTED_EDGE('',*,*,#195255,.T.); +#195255 = EDGE_CURVE('',#195247,#195256,#195258,.T.); +#195256 = VERTEX_POINT('',#195257); +#195257 = CARTESIAN_POINT('',(205.040822,-83.548378,1.585)); +#195258 = LINE('',#195259,#195260); +#195259 = CARTESIAN_POINT('',(205.076231,-83.53365,1.585)); +#195260 = VECTOR('',#195261,1.); +#195261 = DIRECTION('',(-0.923315130307,-0.384043187866,0.)); +#195262 = ORIENTED_EDGE('',*,*,#195263,.T.); +#195263 = EDGE_CURVE('',#195256,#195264,#195266,.T.); +#195264 = VERTEX_POINT('',#195265); +#195265 = CARTESIAN_POINT('',(204.815904,-83.547156,1.585)); +#195266 = LINE('',#195267,#195268); +#195267 = CARTESIAN_POINT('',(205.040822,-83.548378,1.585)); +#195268 = VECTOR('',#195269,1.); +#195269 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#195270 = ORIENTED_EDGE('',*,*,#195271,.T.); +#195271 = EDGE_CURVE('',#195264,#195272,#195274,.T.); +#195272 = VERTEX_POINT('',#195273); +#195273 = CARTESIAN_POINT('',(204.571679,-83.298974,1.585)); +#195274 = CIRCLE('',#195275,0.348628446662); +#195275 = AXIS2_PLACEMENT_3D('',#195276,#195277,#195278); +#195276 = CARTESIAN_POINT('',(204.90907961322,-83.21120942847,1.585)); +#195277 = DIRECTION('',(0.,0.,-1.)); +#195278 = DIRECTION('',(-0.267263369125,-0.963623521674,-0.)); +#195279 = ORIENTED_EDGE('',*,*,#195280,.T.); +#195280 = EDGE_CURVE('',#195272,#195281,#195283,.T.); +#195281 = VERTEX_POINT('',#195282); +#195282 = CARTESIAN_POINT('',(204.572901,-82.978819,1.585)); +#195283 = LINE('',#195284,#195285); +#195284 = CARTESIAN_POINT('',(204.571679,-83.298974,1.585)); +#195285 = VECTOR('',#195286,1.); +#195286 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#195287 = ORIENTED_EDGE('',*,*,#195288,.T.); +#195288 = EDGE_CURVE('',#195281,#195289,#195291,.T.); +#195289 = VERTEX_POINT('',#195290); +#195290 = CARTESIAN_POINT('',(204.821082,-82.734593,1.585)); +#195291 = CIRCLE('',#195292,0.3486213829); +#195292 = AXIS2_PLACEMENT_3D('',#195293,#195294,#195295); +#195293 = CARTESIAN_POINT('',(204.90884222951,-83.07198744383,1.585)); +#195294 = DIRECTION('',(0.,0.,-1.)); +#195295 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#195296 = ORIENTED_EDGE('',*,*,#195297,.T.); +#195297 = EDGE_CURVE('',#195289,#195298,#195300,.T.); +#195298 = VERTEX_POINT('',#195299); +#195299 = CARTESIAN_POINT('',(205.046428,-82.735979,1.585)); +#195300 = LINE('',#195301,#195302); +#195301 = CARTESIAN_POINT('',(204.821082,-82.734593,1.585)); +#195302 = VECTOR('',#195303,1.); +#195303 = DIRECTION('',(0.999981085954,-6.150425501802E-03,0.)); +#195304 = ORIENTED_EDGE('',*,*,#195305,.T.); +#195305 = EDGE_CURVE('',#195298,#195306,#195308,.T.); +#195306 = VERTEX_POINT('',#195307); +#195307 = CARTESIAN_POINT('',(205.047869,-82.460187,1.585)); +#195308 = LINE('',#195309,#195310); +#195309 = CARTESIAN_POINT('',(205.046428,-82.735979,1.585)); +#195310 = VECTOR('',#195311,1.); +#195311 = DIRECTION('',(5.22488081838E-03,0.999986350217,0.)); +#195312 = ORIENTED_EDGE('',*,*,#195313,.T.); +#195313 = EDGE_CURVE('',#195306,#195314,#195316,.T.); +#195314 = VERTEX_POINT('',#195315); +#195315 = CARTESIAN_POINT('',(205.059068,-82.433151,1.585)); +#195316 = LINE('',#195317,#195318); +#195317 = CARTESIAN_POINT('',(205.047869,-82.460187,1.585)); +#195318 = VECTOR('',#195319,1.); +#195319 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#195320 = ORIENTED_EDGE('',*,*,#195321,.T.); +#195321 = EDGE_CURVE('',#195314,#195228,#195322,.T.); +#195322 = LINE('',#195323,#195324); +#195323 = CARTESIAN_POINT('',(205.059068,-82.433151,1.585)); +#195324 = VECTOR('',#195325,1.); +#195325 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#195326 = FACE_BOUND('',#195327,.F.); +#195327 = EDGE_LOOP('',(#195328,#195338,#195346,#195355,#195363,#195372, + #195380,#195388)); +#195328 = ORIENTED_EDGE('',*,*,#195329,.T.); +#195329 = EDGE_CURVE('',#195330,#195332,#195334,.T.); +#195330 = VERTEX_POINT('',#195331); +#195331 = CARTESIAN_POINT('',(205.046428,-82.902123,1.585)); +#195332 = VERTEX_POINT('',#195333); +#195333 = CARTESIAN_POINT('',(205.008485,-82.883152,1.585)); +#195334 = LINE('',#195335,#195336); +#195335 = CARTESIAN_POINT('',(205.046428,-82.902123,1.585)); +#195336 = VECTOR('',#195337,1.); +#195337 = DIRECTION('',(-0.894431905558,0.447204166259,0.)); +#195338 = ORIENTED_EDGE('',*,*,#195339,.T.); +#195339 = EDGE_CURVE('',#195332,#195340,#195342,.T.); +#195340 = VERTEX_POINT('',#195341); +#195341 = CARTESIAN_POINT('',(204.853419,-82.883152,1.585)); +#195342 = LINE('',#195343,#195344); +#195343 = CARTESIAN_POINT('',(205.008485,-82.883152,1.585)); +#195344 = VECTOR('',#195345,1.); +#195345 = DIRECTION('',(-1.,0.,0.)); +#195346 = ORIENTED_EDGE('',*,*,#195347,.T.); +#195347 = EDGE_CURVE('',#195340,#195348,#195350,.T.); +#195348 = VERTEX_POINT('',#195349); +#195349 = CARTESIAN_POINT('',(204.720238,-83.016333,1.585)); +#195350 = CIRCLE('',#195351,0.18686440374); +#195351 = AXIS2_PLACEMENT_3D('',#195352,#195353,#195354); +#195352 = CARTESIAN_POINT('',(204.900955,-83.063869,1.585)); +#195353 = DIRECTION('',(0.,0.,1.)); +#195354 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#195355 = ORIENTED_EDGE('',*,*,#195356,.T.); +#195356 = EDGE_CURVE('',#195348,#195357,#195359,.T.); +#195357 = VERTEX_POINT('',#195358); +#195358 = CARTESIAN_POINT('',(204.720238,-83.266637,1.585)); +#195359 = LINE('',#195360,#195361); +#195360 = CARTESIAN_POINT('',(204.720238,-83.016333,1.585)); +#195361 = VECTOR('',#195362,1.); +#195362 = DIRECTION('',(0.,-1.,0.)); +#195363 = ORIENTED_EDGE('',*,*,#195364,.T.); +#195364 = EDGE_CURVE('',#195357,#195365,#195367,.T.); +#195365 = VERTEX_POINT('',#195366); +#195366 = CARTESIAN_POINT('',(204.853419,-83.399819,1.585)); +#195367 = CIRCLE('',#195368,0.186867373533); +#195368 = AXIS2_PLACEMENT_3D('',#195369,#195370,#195371); +#195369 = CARTESIAN_POINT('',(204.90095771388,-83.21909964305,1.585)); +#195370 = DIRECTION('',(0.,0.,1.)); +#195371 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#195372 = ORIENTED_EDGE('',*,*,#195373,.T.); +#195373 = EDGE_CURVE('',#195365,#195374,#195376,.T.); +#195374 = VERTEX_POINT('',#195375); +#195375 = CARTESIAN_POINT('',(205.008485,-83.399819,1.585)); +#195376 = LINE('',#195377,#195378); +#195377 = CARTESIAN_POINT('',(204.853419,-83.399819,1.585)); +#195378 = VECTOR('',#195379,1.); +#195379 = DIRECTION('',(1.,0.,0.)); +#195380 = ORIENTED_EDGE('',*,*,#195381,.T.); +#195381 = EDGE_CURVE('',#195374,#195382,#195384,.T.); +#195382 = VERTEX_POINT('',#195383); +#195383 = CARTESIAN_POINT('',(205.046428,-83.380847,1.585)); +#195384 = LINE('',#195385,#195386); +#195385 = CARTESIAN_POINT('',(205.008485,-83.399819,1.585)); +#195386 = VECTOR('',#195387,1.); +#195387 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#195388 = ORIENTED_EDGE('',*,*,#195389,.T.); +#195389 = EDGE_CURVE('',#195382,#195330,#195390,.T.); +#195390 = LINE('',#195391,#195392); +#195391 = CARTESIAN_POINT('',(205.046428,-83.380847,1.585)); +#195392 = VECTOR('',#195393,1.); +#195393 = DIRECTION('',(0.,1.,0.)); +#195394 = PLANE('',#195395); +#195395 = AXIS2_PLACEMENT_3D('',#195396,#195397,#195398); +#195396 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195397 = DIRECTION('',(0.,0.,1.)); +#195398 = DIRECTION('',(1.,0.,-0.)); +#195399 = SHELL_BASED_SURFACE_MODEL('',(#195400)); +#195400 = OPEN_SHELL('',(#195401)); +#195401 = ADVANCED_FACE('',(#195402),#195504,.T.); +#195402 = FACE_BOUND('',#195403,.F.); +#195403 = EDGE_LOOP('',(#195404,#195414,#195423,#195431,#195439,#195448, + #195456,#195464,#195473,#195481,#195489,#195498)); +#195404 = ORIENTED_EDGE('',*,*,#195405,.T.); +#195405 = EDGE_CURVE('',#195406,#195408,#195410,.T.); +#195406 = VERTEX_POINT('',#195407); +#195407 = CARTESIAN_POINT('',(148.259596,-83.071878,1.585)); +#195408 = VERTEX_POINT('',#195409); +#195409 = CARTESIAN_POINT('',(148.673541,-82.795916,1.585)); +#195410 = LINE('',#195411,#195412); +#195411 = CARTESIAN_POINT('',(148.259596,-83.071878,1.585)); +#195412 = VECTOR('',#195413,1.); +#195413 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#195414 = ORIENTED_EDGE('',*,*,#195415,.T.); +#195415 = EDGE_CURVE('',#195408,#195416,#195418,.T.); +#195416 = VERTEX_POINT('',#195417); +#195417 = CARTESIAN_POINT('',(148.745652,-82.904082,1.585)); +#195418 = CIRCLE('',#195419,6.499976899535E-02); +#195419 = AXIS2_PLACEMENT_3D('',#195420,#195421,#195422); +#195420 = CARTESIAN_POINT('',(148.70959612917,-82.84999924722,1.585)); +#195421 = DIRECTION('',(0.,0.,-1.)); +#195422 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#195423 = ORIENTED_EDGE('',*,*,#195424,.T.); +#195424 = EDGE_CURVE('',#195416,#195425,#195427,.T.); +#195425 = VERTEX_POINT('',#195426); +#195426 = CARTESIAN_POINT('',(148.376776,-83.149999,1.585)); +#195427 = LINE('',#195428,#195429); +#195428 = CARTESIAN_POINT('',(148.745652,-82.904082,1.585)); +#195429 = VECTOR('',#195430,1.); +#195430 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#195431 = ORIENTED_EDGE('',*,*,#195432,.T.); +#195432 = EDGE_CURVE('',#195425,#195433,#195435,.T.); +#195433 = VERTEX_POINT('',#195434); +#195434 = CARTESIAN_POINT('',(148.745652,-83.395916,1.585)); +#195435 = LINE('',#195436,#195437); +#195436 = CARTESIAN_POINT('',(148.376776,-83.149999,1.585)); +#195437 = VECTOR('',#195438,1.); +#195438 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#195439 = ORIENTED_EDGE('',*,*,#195440,.T.); +#195440 = EDGE_CURVE('',#195433,#195441,#195443,.T.); +#195441 = VERTEX_POINT('',#195442); +#195442 = CARTESIAN_POINT('',(148.673541,-83.504082,1.585)); +#195443 = CIRCLE('',#195444,6.49997689954E-02); +#195444 = AXIS2_PLACEMENT_3D('',#195445,#195446,#195447); +#195445 = CARTESIAN_POINT('',(148.70959687747,-83.44999925164,1.585)); +#195446 = DIRECTION('',(0.,0.,-1.)); +#195447 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#195448 = ORIENTED_EDGE('',*,*,#195449,.T.); +#195449 = EDGE_CURVE('',#195441,#195450,#195452,.T.); +#195450 = VERTEX_POINT('',#195451); +#195451 = CARTESIAN_POINT('',(148.259596,-83.228119,1.585)); +#195452 = LINE('',#195453,#195454); +#195453 = CARTESIAN_POINT('',(148.673541,-83.504082,1.585)); +#195454 = VECTOR('',#195455,1.); +#195455 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#195456 = ORIENTED_EDGE('',*,*,#195457,.T.); +#195457 = EDGE_CURVE('',#195450,#195458,#195460,.T.); +#195458 = VERTEX_POINT('',#195459); +#195459 = CARTESIAN_POINT('',(147.845653,-83.504082,1.585)); +#195460 = LINE('',#195461,#195462); +#195461 = CARTESIAN_POINT('',(148.259596,-83.228119,1.585)); +#195462 = VECTOR('',#195463,1.); +#195463 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#195464 = ORIENTED_EDGE('',*,*,#195465,.T.); +#195465 = EDGE_CURVE('',#195458,#195466,#195468,.T.); +#195466 = VERTEX_POINT('',#195467); +#195467 = CARTESIAN_POINT('',(147.773541,-83.395916,1.585)); +#195468 = CIRCLE('',#195469,6.500004634766E-02); +#195469 = AXIS2_PLACEMENT_3D('',#195470,#195471,#195472); +#195470 = CARTESIAN_POINT('',(147.80959737004,-83.4499987533,1.585)); +#195471 = DIRECTION('',(0.,0.,-1.)); +#195472 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#195473 = ORIENTED_EDGE('',*,*,#195474,.T.); +#195474 = EDGE_CURVE('',#195466,#195475,#195477,.T.); +#195475 = VERTEX_POINT('',#195476); +#195476 = CARTESIAN_POINT('',(148.142416,-83.149999,1.585)); +#195477 = LINE('',#195478,#195479); +#195478 = CARTESIAN_POINT('',(147.773541,-83.395916,1.585)); +#195479 = VECTOR('',#195480,1.); +#195480 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#195481 = ORIENTED_EDGE('',*,*,#195482,.T.); +#195482 = EDGE_CURVE('',#195475,#195483,#195485,.T.); +#195483 = VERTEX_POINT('',#195484); +#195484 = CARTESIAN_POINT('',(147.773541,-82.904082,1.585)); +#195485 = LINE('',#195486,#195487); +#195486 = CARTESIAN_POINT('',(148.142416,-83.149999,1.585)); +#195487 = VECTOR('',#195488,1.); +#195488 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#195489 = ORIENTED_EDGE('',*,*,#195490,.T.); +#195490 = EDGE_CURVE('',#195483,#195491,#195493,.T.); +#195491 = VERTEX_POINT('',#195492); +#195492 = CARTESIAN_POINT('',(147.845653,-82.795916,1.585)); +#195493 = CIRCLE('',#195494,6.500004634723E-02); +#195494 = AXIS2_PLACEMENT_3D('',#195495,#195496,#195497); +#195495 = CARTESIAN_POINT('',(147.80959731405,-82.84999920937,1.585)); +#195496 = DIRECTION('',(0.,0.,-1.)); +#195497 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#195498 = ORIENTED_EDGE('',*,*,#195499,.T.); +#195499 = EDGE_CURVE('',#195491,#195406,#195500,.T.); +#195500 = LINE('',#195501,#195502); +#195501 = CARTESIAN_POINT('',(147.845653,-82.795916,1.585)); +#195502 = VECTOR('',#195503,1.); +#195503 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#195504 = PLANE('',#195505); +#195505 = AXIS2_PLACEMENT_3D('',#195506,#195507,#195508); +#195506 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195507 = DIRECTION('',(0.,0.,1.)); +#195508 = DIRECTION('',(1.,0.,-0.)); +#195509 = SHELL_BASED_SURFACE_MODEL('',(#195510)); +#195510 = OPEN_SHELL('',(#195511)); +#195511 = ADVANCED_FACE('',(#195512),#195614,.T.); +#195512 = FACE_BOUND('',#195513,.F.); +#195513 = EDGE_LOOP('',(#195514,#195524,#195533,#195541,#195549,#195558, + #195566,#195574,#195583,#195591,#195599,#195608)); +#195514 = ORIENTED_EDGE('',*,*,#195515,.T.); +#195515 = EDGE_CURVE('',#195516,#195518,#195520,.T.); +#195516 = VERTEX_POINT('',#195517); +#195517 = CARTESIAN_POINT('',(151.009596,-83.064735,1.585)); +#195518 = VERTEX_POINT('',#195519); +#195519 = CARTESIAN_POINT('',(151.423541,-82.788773,1.585)); +#195520 = LINE('',#195521,#195522); +#195521 = CARTESIAN_POINT('',(151.009596,-83.064735,1.585)); +#195522 = VECTOR('',#195523,1.); +#195523 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#195524 = ORIENTED_EDGE('',*,*,#195525,.T.); +#195525 = EDGE_CURVE('',#195518,#195526,#195528,.T.); +#195526 = VERTEX_POINT('',#195527); +#195527 = CARTESIAN_POINT('',(151.495652,-82.896939,1.585)); +#195528 = CIRCLE('',#195529,6.499976899535E-02); +#195529 = AXIS2_PLACEMENT_3D('',#195530,#195531,#195532); +#195530 = CARTESIAN_POINT('',(151.45959612917,-82.84285624722,1.585)); +#195531 = DIRECTION('',(0.,0.,-1.)); +#195532 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#195533 = ORIENTED_EDGE('',*,*,#195534,.T.); +#195534 = EDGE_CURVE('',#195526,#195535,#195537,.T.); +#195535 = VERTEX_POINT('',#195536); +#195536 = CARTESIAN_POINT('',(151.126776,-83.142856,1.585)); +#195537 = LINE('',#195538,#195539); +#195538 = CARTESIAN_POINT('',(151.495652,-82.896939,1.585)); +#195539 = VECTOR('',#195540,1.); +#195540 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#195541 = ORIENTED_EDGE('',*,*,#195542,.T.); +#195542 = EDGE_CURVE('',#195535,#195543,#195545,.T.); +#195543 = VERTEX_POINT('',#195544); +#195544 = CARTESIAN_POINT('',(151.495652,-83.388773,1.585)); +#195545 = LINE('',#195546,#195547); +#195546 = CARTESIAN_POINT('',(151.126776,-83.142856,1.585)); +#195547 = VECTOR('',#195548,1.); +#195548 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#195549 = ORIENTED_EDGE('',*,*,#195550,.T.); +#195550 = EDGE_CURVE('',#195543,#195551,#195553,.T.); +#195551 = VERTEX_POINT('',#195552); +#195552 = CARTESIAN_POINT('',(151.423541,-83.496939,1.585)); +#195553 = CIRCLE('',#195554,6.49997689954E-02); +#195554 = AXIS2_PLACEMENT_3D('',#195555,#195556,#195557); +#195555 = CARTESIAN_POINT('',(151.45959687747,-83.44285625164,1.585)); +#195556 = DIRECTION('',(0.,0.,-1.)); +#195557 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#195558 = ORIENTED_EDGE('',*,*,#195559,.T.); +#195559 = EDGE_CURVE('',#195551,#195560,#195562,.T.); +#195560 = VERTEX_POINT('',#195561); +#195561 = CARTESIAN_POINT('',(151.009596,-83.220976,1.585)); +#195562 = LINE('',#195563,#195564); +#195563 = CARTESIAN_POINT('',(151.423541,-83.496939,1.585)); +#195564 = VECTOR('',#195565,1.); +#195565 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#195566 = ORIENTED_EDGE('',*,*,#195567,.T.); +#195567 = EDGE_CURVE('',#195560,#195568,#195570,.T.); +#195568 = VERTEX_POINT('',#195569); +#195569 = CARTESIAN_POINT('',(150.595653,-83.496939,1.585)); +#195570 = LINE('',#195571,#195572); +#195571 = CARTESIAN_POINT('',(151.009596,-83.220976,1.585)); +#195572 = VECTOR('',#195573,1.); +#195573 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#195574 = ORIENTED_EDGE('',*,*,#195575,.T.); +#195575 = EDGE_CURVE('',#195568,#195576,#195578,.T.); +#195576 = VERTEX_POINT('',#195577); +#195577 = CARTESIAN_POINT('',(150.523541,-83.388773,1.585)); +#195578 = CIRCLE('',#195579,6.500004634766E-02); +#195579 = AXIS2_PLACEMENT_3D('',#195580,#195581,#195582); +#195580 = CARTESIAN_POINT('',(150.55959737004,-83.4428557533,1.585)); +#195581 = DIRECTION('',(0.,0.,-1.)); +#195582 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#195583 = ORIENTED_EDGE('',*,*,#195584,.T.); +#195584 = EDGE_CURVE('',#195576,#195585,#195587,.T.); +#195585 = VERTEX_POINT('',#195586); +#195586 = CARTESIAN_POINT('',(150.892416,-83.142856,1.585)); +#195587 = LINE('',#195588,#195589); +#195588 = CARTESIAN_POINT('',(150.523541,-83.388773,1.585)); +#195589 = VECTOR('',#195590,1.); +#195590 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#195591 = ORIENTED_EDGE('',*,*,#195592,.T.); +#195592 = EDGE_CURVE('',#195585,#195593,#195595,.T.); +#195593 = VERTEX_POINT('',#195594); +#195594 = CARTESIAN_POINT('',(150.523541,-82.896939,1.585)); +#195595 = LINE('',#195596,#195597); +#195596 = CARTESIAN_POINT('',(150.892416,-83.142856,1.585)); +#195597 = VECTOR('',#195598,1.); +#195598 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#195599 = ORIENTED_EDGE('',*,*,#195600,.T.); +#195600 = EDGE_CURVE('',#195593,#195601,#195603,.T.); +#195601 = VERTEX_POINT('',#195602); +#195602 = CARTESIAN_POINT('',(150.595653,-82.788773,1.585)); +#195603 = CIRCLE('',#195604,6.500004634723E-02); +#195604 = AXIS2_PLACEMENT_3D('',#195605,#195606,#195607); +#195605 = CARTESIAN_POINT('',(150.55959731405,-82.84285620937,1.585)); +#195606 = DIRECTION('',(0.,0.,-1.)); +#195607 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#195608 = ORIENTED_EDGE('',*,*,#195609,.T.); +#195609 = EDGE_CURVE('',#195601,#195516,#195610,.T.); +#195610 = LINE('',#195611,#195612); +#195611 = CARTESIAN_POINT('',(150.595653,-82.788773,1.585)); +#195612 = VECTOR('',#195613,1.); +#195613 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#195614 = PLANE('',#195615); +#195615 = AXIS2_PLACEMENT_3D('',#195616,#195617,#195618); +#195616 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195617 = DIRECTION('',(0.,0.,1.)); +#195618 = DIRECTION('',(1.,0.,-0.)); +#195619 = SHELL_BASED_SURFACE_MODEL('',(#195620)); +#195620 = OPEN_SHELL('',(#195621)); +#195621 = ADVANCED_FACE('',(#195622),#195741,.T.); +#195622 = FACE_BOUND('',#195623,.F.); +#195623 = EDGE_LOOP('',(#195624,#195635,#195643,#195652,#195660,#195668, + #195676,#195685,#195693,#195701,#195709,#195718,#195726,#195735)); +#195624 = ORIENTED_EDGE('',*,*,#195625,.T.); +#195625 = EDGE_CURVE('',#195626,#195628,#195630,.T.); +#195626 = VERTEX_POINT('',#195627); +#195627 = CARTESIAN_POINT('',(169.813571,-82.459597,1.585)); +#195628 = VERTEX_POINT('',#195629); +#195629 = CARTESIAN_POINT('',(169.878571,-82.394597,1.585)); +#195630 = CIRCLE('',#195631,6.500103935393E-02); +#195631 = AXIS2_PLACEMENT_3D('',#195632,#195633,#195634); +#195632 = CARTESIAN_POINT('',(169.87857203934,-82.45959803934,1.585)); +#195633 = DIRECTION('',(0.,0.,-1.)); +#195634 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#195635 = ORIENTED_EDGE('',*,*,#195636,.T.); +#195636 = EDGE_CURVE('',#195628,#195637,#195639,.T.); +#195637 = VERTEX_POINT('',#195638); +#195638 = CARTESIAN_POINT('',(170.307143,-82.394597,1.585)); +#195639 = LINE('',#195640,#195641); +#195640 = CARTESIAN_POINT('',(169.878571,-82.394597,1.585)); +#195641 = VECTOR('',#195642,1.); +#195642 = DIRECTION('',(1.,0.,0.)); +#195643 = ORIENTED_EDGE('',*,*,#195644,.T.); +#195644 = EDGE_CURVE('',#195637,#195645,#195647,.T.); +#195645 = VERTEX_POINT('',#195646); +#195646 = CARTESIAN_POINT('',(170.307143,-82.524597,1.585)); +#195647 = CIRCLE('',#195648,6.500000000091E-02); +#195648 = AXIS2_PLACEMENT_3D('',#195649,#195650,#195651); +#195649 = CARTESIAN_POINT('',(170.30714265513,-82.459597,1.585)); +#195650 = DIRECTION('',(0.,0.,-1.)); +#195651 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#195652 = ORIENTED_EDGE('',*,*,#195653,.T.); +#195653 = EDGE_CURVE('',#195645,#195654,#195656,.T.); +#195654 = VERTEX_POINT('',#195655); +#195655 = CARTESIAN_POINT('',(169.943571,-82.524597,1.585)); +#195656 = LINE('',#195657,#195658); +#195657 = CARTESIAN_POINT('',(170.307143,-82.524597,1.585)); +#195658 = VECTOR('',#195659,1.); +#195659 = DIRECTION('',(-1.,0.,0.)); +#195660 = ORIENTED_EDGE('',*,*,#195661,.T.); +#195661 = EDGE_CURVE('',#195654,#195662,#195664,.T.); +#195662 = VERTEX_POINT('',#195663); +#195663 = CARTESIAN_POINT('',(169.943571,-82.823168,1.585)); +#195664 = LINE('',#195665,#195666); +#195665 = CARTESIAN_POINT('',(169.943571,-82.524597,1.585)); +#195666 = VECTOR('',#195667,1.); +#195667 = DIRECTION('',(0.,-1.,0.)); +#195668 = ORIENTED_EDGE('',*,*,#195669,.T.); +#195669 = EDGE_CURVE('',#195662,#195670,#195672,.T.); +#195670 = VERTEX_POINT('',#195671); +#195671 = CARTESIAN_POINT('',(170.178571,-82.823168,1.585)); +#195672 = LINE('',#195673,#195674); +#195673 = CARTESIAN_POINT('',(169.943571,-82.823168,1.585)); +#195674 = VECTOR('',#195675,1.); +#195675 = DIRECTION('',(1.,0.,0.)); +#195676 = ORIENTED_EDGE('',*,*,#195677,.T.); +#195677 = EDGE_CURVE('',#195670,#195678,#195680,.T.); +#195678 = VERTEX_POINT('',#195679); +#195679 = CARTESIAN_POINT('',(170.178571,-82.953168,1.585)); +#195680 = CIRCLE('',#195681,6.500000000092E-02); +#195681 = AXIS2_PLACEMENT_3D('',#195682,#195683,#195684); +#195682 = CARTESIAN_POINT('',(170.17857065513,-82.888168,1.585)); +#195683 = DIRECTION('',(0.,0.,-1.)); +#195684 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#195685 = ORIENTED_EDGE('',*,*,#195686,.T.); +#195686 = EDGE_CURVE('',#195678,#195687,#195689,.T.); +#195687 = VERTEX_POINT('',#195688); +#195688 = CARTESIAN_POINT('',(169.943571,-82.953168,1.585)); +#195689 = LINE('',#195690,#195691); +#195690 = CARTESIAN_POINT('',(170.178571,-82.953168,1.585)); +#195691 = VECTOR('',#195692,1.); +#195692 = DIRECTION('',(-1.,0.,0.)); +#195693 = ORIENTED_EDGE('',*,*,#195694,.T.); +#195694 = EDGE_CURVE('',#195687,#195695,#195697,.T.); +#195695 = VERTEX_POINT('',#195696); +#195696 = CARTESIAN_POINT('',(169.943571,-83.294597,1.585)); +#195697 = LINE('',#195698,#195699); +#195698 = CARTESIAN_POINT('',(169.943571,-82.953168,1.585)); +#195699 = VECTOR('',#195700,1.); +#195700 = DIRECTION('',(0.,-1.,0.)); +#195701 = ORIENTED_EDGE('',*,*,#195702,.T.); +#195702 = EDGE_CURVE('',#195695,#195703,#195705,.T.); +#195703 = VERTEX_POINT('',#195704); +#195704 = CARTESIAN_POINT('',(170.307143,-83.294597,1.585)); +#195705 = LINE('',#195706,#195707); +#195706 = CARTESIAN_POINT('',(169.943571,-83.294597,1.585)); +#195707 = VECTOR('',#195708,1.); +#195708 = DIRECTION('',(1.,0.,0.)); +#195709 = ORIENTED_EDGE('',*,*,#195710,.T.); +#195710 = EDGE_CURVE('',#195703,#195711,#195713,.T.); +#195711 = VERTEX_POINT('',#195712); +#195712 = CARTESIAN_POINT('',(170.307143,-83.424597,1.585)); +#195713 = CIRCLE('',#195714,6.500000000091E-02); +#195714 = AXIS2_PLACEMENT_3D('',#195715,#195716,#195717); +#195715 = CARTESIAN_POINT('',(170.30714265513,-83.359597,1.585)); +#195716 = DIRECTION('',(0.,0.,-1.)); +#195717 = DIRECTION('',(5.30565758841E-06,0.999999999986,0.)); +#195718 = ORIENTED_EDGE('',*,*,#195719,.T.); +#195719 = EDGE_CURVE('',#195711,#195720,#195722,.T.); +#195720 = VERTEX_POINT('',#195721); +#195721 = CARTESIAN_POINT('',(169.878571,-83.424597,1.585)); +#195722 = LINE('',#195723,#195724); +#195723 = CARTESIAN_POINT('',(170.307143,-83.424597,1.585)); +#195724 = VECTOR('',#195725,1.); +#195725 = DIRECTION('',(-1.,0.,0.)); +#195726 = ORIENTED_EDGE('',*,*,#195727,.T.); +#195727 = EDGE_CURVE('',#195720,#195728,#195730,.T.); +#195728 = VERTEX_POINT('',#195729); +#195729 = CARTESIAN_POINT('',(169.813571,-83.359597,1.585)); +#195730 = CIRCLE('',#195731,6.500103935388E-02); +#195731 = AXIS2_PLACEMENT_3D('',#195732,#195733,#195734); +#195732 = CARTESIAN_POINT('',(169.87857203934,-83.35959596065,1.585)); +#195733 = DIRECTION('',(0.,0.,-1.)); +#195734 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#195735 = ORIENTED_EDGE('',*,*,#195736,.T.); +#195736 = EDGE_CURVE('',#195728,#195626,#195737,.T.); +#195737 = LINE('',#195738,#195739); +#195738 = CARTESIAN_POINT('',(169.813571,-83.359597,1.585)); +#195739 = VECTOR('',#195740,1.); +#195740 = DIRECTION('',(0.,1.,0.)); +#195741 = PLANE('',#195742); +#195742 = AXIS2_PLACEMENT_3D('',#195743,#195744,#195745); +#195743 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195744 = DIRECTION('',(0.,0.,1.)); +#195745 = DIRECTION('',(1.,0.,-0.)); +#195746 = SHELL_BASED_SURFACE_MODEL('',(#195747)); +#195747 = OPEN_SHELL('',(#195748)); +#195748 = ADVANCED_FACE('',(#195749),#195868,.T.); +#195749 = FACE_BOUND('',#195750,.F.); +#195750 = EDGE_LOOP('',(#195751,#195762,#195770,#195779,#195787,#195795, + #195803,#195812,#195820,#195828,#195836,#195845,#195853,#195862)); +#195751 = ORIENTED_EDGE('',*,*,#195752,.T.); +#195752 = EDGE_CURVE('',#195753,#195755,#195757,.T.); +#195753 = VERTEX_POINT('',#195754); +#195754 = CARTESIAN_POINT('',(171.485,-82.459597,1.585)); +#195755 = VERTEX_POINT('',#195756); +#195756 = CARTESIAN_POINT('',(171.55,-82.394597,1.585)); +#195757 = CIRCLE('',#195758,6.500103935382E-02); +#195758 = AXIS2_PLACEMENT_3D('',#195759,#195760,#195761); +#195759 = CARTESIAN_POINT('',(171.55000103934,-82.45959803934,1.585)); +#195760 = DIRECTION('',(0.,0.,-1.)); +#195761 = DIRECTION('',(-0.999999999872,1.598967539909E-05,0.)); +#195762 = ORIENTED_EDGE('',*,*,#195763,.T.); +#195763 = EDGE_CURVE('',#195755,#195764,#195766,.T.); +#195764 = VERTEX_POINT('',#195765); +#195765 = CARTESIAN_POINT('',(171.978572,-82.394597,1.585)); +#195766 = LINE('',#195767,#195768); +#195767 = CARTESIAN_POINT('',(171.55,-82.394597,1.585)); +#195768 = VECTOR('',#195769,1.); +#195769 = DIRECTION('',(1.,0.,0.)); +#195770 = ORIENTED_EDGE('',*,*,#195771,.T.); +#195771 = EDGE_CURVE('',#195764,#195772,#195774,.T.); +#195772 = VERTEX_POINT('',#195773); +#195773 = CARTESIAN_POINT('',(171.978572,-82.524597,1.585)); +#195774 = CIRCLE('',#195775,6.500000000091E-02); +#195775 = AXIS2_PLACEMENT_3D('',#195776,#195777,#195778); +#195776 = CARTESIAN_POINT('',(171.97857165513,-82.459597,1.585)); +#195777 = DIRECTION('',(0.,0.,-1.)); +#195778 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#195779 = ORIENTED_EDGE('',*,*,#195780,.T.); +#195780 = EDGE_CURVE('',#195772,#195781,#195783,.T.); +#195781 = VERTEX_POINT('',#195782); +#195782 = CARTESIAN_POINT('',(171.615,-82.524597,1.585)); +#195783 = LINE('',#195784,#195785); +#195784 = CARTESIAN_POINT('',(171.978572,-82.524597,1.585)); +#195785 = VECTOR('',#195786,1.); +#195786 = DIRECTION('',(-1.,0.,0.)); +#195787 = ORIENTED_EDGE('',*,*,#195788,.T.); +#195788 = EDGE_CURVE('',#195781,#195789,#195791,.T.); +#195789 = VERTEX_POINT('',#195790); +#195790 = CARTESIAN_POINT('',(171.615,-82.823168,1.585)); +#195791 = LINE('',#195792,#195793); +#195792 = CARTESIAN_POINT('',(171.615,-82.524597,1.585)); +#195793 = VECTOR('',#195794,1.); +#195794 = DIRECTION('',(0.,-1.,0.)); +#195795 = ORIENTED_EDGE('',*,*,#195796,.T.); +#195796 = EDGE_CURVE('',#195789,#195797,#195799,.T.); +#195797 = VERTEX_POINT('',#195798); +#195798 = CARTESIAN_POINT('',(171.85,-82.823168,1.585)); +#195799 = LINE('',#195800,#195801); +#195800 = CARTESIAN_POINT('',(171.615,-82.823168,1.585)); +#195801 = VECTOR('',#195802,1.); +#195802 = DIRECTION('',(1.,0.,0.)); +#195803 = ORIENTED_EDGE('',*,*,#195804,.T.); +#195804 = EDGE_CURVE('',#195797,#195805,#195807,.T.); +#195805 = VERTEX_POINT('',#195806); +#195806 = CARTESIAN_POINT('',(171.85,-82.953168,1.585)); +#195807 = CIRCLE('',#195808,6.500000000092E-02); +#195808 = AXIS2_PLACEMENT_3D('',#195809,#195810,#195811); +#195809 = CARTESIAN_POINT('',(171.84999965513,-82.888168,1.585)); +#195810 = DIRECTION('',(0.,0.,-1.)); +#195811 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#195812 = ORIENTED_EDGE('',*,*,#195813,.T.); +#195813 = EDGE_CURVE('',#195805,#195814,#195816,.T.); +#195814 = VERTEX_POINT('',#195815); +#195815 = CARTESIAN_POINT('',(171.615,-82.953168,1.585)); +#195816 = LINE('',#195817,#195818); +#195817 = CARTESIAN_POINT('',(171.85,-82.953168,1.585)); +#195818 = VECTOR('',#195819,1.); +#195819 = DIRECTION('',(-1.,0.,0.)); +#195820 = ORIENTED_EDGE('',*,*,#195821,.T.); +#195821 = EDGE_CURVE('',#195814,#195822,#195824,.T.); +#195822 = VERTEX_POINT('',#195823); +#195823 = CARTESIAN_POINT('',(171.615,-83.294597,1.585)); +#195824 = LINE('',#195825,#195826); +#195825 = CARTESIAN_POINT('',(171.615,-82.953168,1.585)); +#195826 = VECTOR('',#195827,1.); +#195827 = DIRECTION('',(0.,-1.,0.)); +#195828 = ORIENTED_EDGE('',*,*,#195829,.T.); +#195829 = EDGE_CURVE('',#195822,#195830,#195832,.T.); +#195830 = VERTEX_POINT('',#195831); +#195831 = CARTESIAN_POINT('',(171.978572,-83.294597,1.585)); +#195832 = LINE('',#195833,#195834); +#195833 = CARTESIAN_POINT('',(171.615,-83.294597,1.585)); +#195834 = VECTOR('',#195835,1.); +#195835 = DIRECTION('',(1.,0.,0.)); +#195836 = ORIENTED_EDGE('',*,*,#195837,.T.); +#195837 = EDGE_CURVE('',#195830,#195838,#195840,.T.); +#195838 = VERTEX_POINT('',#195839); +#195839 = CARTESIAN_POINT('',(171.978572,-83.424597,1.585)); +#195840 = CIRCLE('',#195841,6.500000000092E-02); +#195841 = AXIS2_PLACEMENT_3D('',#195842,#195843,#195844); +#195842 = CARTESIAN_POINT('',(171.97857165513,-83.359597,1.585)); +#195843 = DIRECTION('',(0.,0.,-1.)); +#195844 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#195845 = ORIENTED_EDGE('',*,*,#195846,.T.); +#195846 = EDGE_CURVE('',#195838,#195847,#195849,.T.); +#195847 = VERTEX_POINT('',#195848); +#195848 = CARTESIAN_POINT('',(171.55,-83.424597,1.585)); +#195849 = LINE('',#195850,#195851); +#195850 = CARTESIAN_POINT('',(171.978572,-83.424597,1.585)); +#195851 = VECTOR('',#195852,1.); +#195852 = DIRECTION('',(-1.,0.,0.)); +#195853 = ORIENTED_EDGE('',*,*,#195854,.T.); +#195854 = EDGE_CURVE('',#195847,#195855,#195857,.T.); +#195855 = VERTEX_POINT('',#195856); +#195856 = CARTESIAN_POINT('',(171.485,-83.359597,1.585)); +#195857 = CIRCLE('',#195858,6.500103935387E-02); +#195858 = AXIS2_PLACEMENT_3D('',#195859,#195860,#195861); +#195859 = CARTESIAN_POINT('',(171.55000103934,-83.35959596065,1.585)); +#195860 = DIRECTION('',(0.,0.,-1.)); +#195861 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#195862 = ORIENTED_EDGE('',*,*,#195863,.T.); +#195863 = EDGE_CURVE('',#195855,#195753,#195864,.T.); +#195864 = LINE('',#195865,#195866); +#195865 = CARTESIAN_POINT('',(171.485,-83.359597,1.585)); +#195866 = VECTOR('',#195867,1.); +#195867 = DIRECTION('',(0.,1.,0.)); +#195868 = PLANE('',#195869); +#195869 = AXIS2_PLACEMENT_3D('',#195870,#195871,#195872); +#195870 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195871 = DIRECTION('',(0.,0.,1.)); +#195872 = DIRECTION('',(1.,0.,-0.)); +#195873 = SHELL_BASED_SURFACE_MODEL('',(#195874)); +#195874 = OPEN_SHELL('',(#195875)); +#195875 = ADVANCED_FACE('',(#195876,#196010),#196062,.T.); +#195876 = FACE_BOUND('',#195877,.F.); +#195877 = EDGE_LOOP('',(#195878,#195889,#195897,#195905,#195913,#195922, + #195930,#195938,#195946,#195954,#195962,#195971,#195979,#195987, + #195995,#196004)); +#195878 = ORIENTED_EDGE('',*,*,#195879,.T.); +#195879 = EDGE_CURVE('',#195880,#195882,#195884,.T.); +#195880 = VERTEX_POINT('',#195881); +#195881 = CARTESIAN_POINT('',(168.913571,-82.459597,1.585)); +#195882 = VERTEX_POINT('',#195883); +#195883 = CARTESIAN_POINT('',(168.978571,-82.394597,1.585)); +#195884 = CIRCLE('',#195885,6.500103935393E-02); +#195885 = AXIS2_PLACEMENT_3D('',#195886,#195887,#195888); +#195886 = CARTESIAN_POINT('',(168.97857203934,-82.45959803934,1.585)); +#195887 = DIRECTION('',(0.,0.,-1.)); +#195888 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#195889 = ORIENTED_EDGE('',*,*,#195890,.T.); +#195890 = EDGE_CURVE('',#195882,#195891,#195893,.T.); +#195891 = VERTEX_POINT('',#195892); +#195892 = CARTESIAN_POINT('',(169.324621,-82.395232,1.585)); +#195893 = LINE('',#195894,#195895); +#195894 = CARTESIAN_POINT('',(168.978571,-82.394597,1.585)); +#195895 = VECTOR('',#195896,1.); +#195896 = DIRECTION('',(0.999998316401,-1.834991853498E-03,0.)); +#195897 = ORIENTED_EDGE('',*,*,#195898,.T.); +#195898 = EDGE_CURVE('',#195891,#195899,#195901,.T.); +#195899 = VERTEX_POINT('',#195900); +#195900 = CARTESIAN_POINT('',(169.350497,-82.401459,1.585)); +#195901 = LINE('',#195902,#195903); +#195902 = CARTESIAN_POINT('',(169.324621,-82.395232,1.585)); +#195903 = VECTOR('',#195904,1.); +#195904 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#195905 = ORIENTED_EDGE('',*,*,#195906,.T.); +#195906 = EDGE_CURVE('',#195899,#195907,#195909,.T.); +#195907 = VERTEX_POINT('',#195908); +#195908 = CARTESIAN_POINT('',(169.453105,-82.456492,1.585)); +#195909 = LINE('',#195910,#195911); +#195910 = CARTESIAN_POINT('',(169.350497,-82.401459,1.585)); +#195911 = VECTOR('',#195912,1.); +#195912 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#195913 = ORIENTED_EDGE('',*,*,#195914,.T.); +#195914 = EDGE_CURVE('',#195907,#195915,#195917,.T.); +#195915 = VERTEX_POINT('',#195916); +#195916 = CARTESIAN_POINT('',(169.554941,-82.774253,1.585)); +#195917 = CIRCLE('',#195918,0.311668456374); +#195918 = AXIS2_PLACEMENT_3D('',#195919,#195920,#195921); +#195919 = CARTESIAN_POINT('',(169.25333046242,-82.69571440872,1.585)); +#195920 = DIRECTION('',(0.,0.,-1.)); +#195921 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#195922 = ORIENTED_EDGE('',*,*,#195923,.T.); +#195923 = EDGE_CURVE('',#195915,#195924,#195926,.T.); +#195924 = VERTEX_POINT('',#195925); +#195925 = CARTESIAN_POINT('',(169.501751,-82.882608,1.585)); +#195926 = LINE('',#195927,#195928); +#195927 = CARTESIAN_POINT('',(169.554941,-82.774253,1.585)); +#195928 = VECTOR('',#195929,1.); +#195929 = DIRECTION('',(-0.440656804576,-0.897675654444,0.)); +#195930 = ORIENTED_EDGE('',*,*,#195931,.T.); +#195931 = EDGE_CURVE('',#195924,#195932,#195934,.T.); +#195932 = VERTEX_POINT('',#195933); +#195933 = CARTESIAN_POINT('',(169.44444,-82.939919,1.585)); +#195934 = LINE('',#195935,#195936); +#195935 = CARTESIAN_POINT('',(169.501751,-82.882608,1.585)); +#195936 = VECTOR('',#195937,1.); +#195937 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#195938 = ORIENTED_EDGE('',*,*,#195939,.T.); +#195939 = EDGE_CURVE('',#195932,#195940,#195942,.T.); +#195940 = VERTEX_POINT('',#195941); +#195941 = CARTESIAN_POINT('',(169.336084,-82.993109,1.585)); +#195942 = LINE('',#195943,#195944); +#195943 = CARTESIAN_POINT('',(169.44444,-82.939919,1.585)); +#195944 = VECTOR('',#195945,1.); +#195945 = DIRECTION('',(-0.897677263112,-0.440653527492,0.)); +#195946 = ORIENTED_EDGE('',*,*,#195947,.T.); +#195947 = EDGE_CURVE('',#195940,#195948,#195950,.T.); +#195948 = VERTEX_POINT('',#195949); +#195949 = CARTESIAN_POINT('',(169.317699,-82.996025,1.585)); +#195950 = LINE('',#195951,#195952); +#195951 = CARTESIAN_POINT('',(169.336084,-82.993109,1.585)); +#195952 = VECTOR('',#195953,1.); +#195953 = DIRECTION('',(-0.987654268842,-0.15664943421,0.)); +#195954 = ORIENTED_EDGE('',*,*,#195955,.T.); +#195955 = EDGE_CURVE('',#195948,#195956,#195958,.T.); +#195956 = VERTEX_POINT('',#195957); +#195957 = CARTESIAN_POINT('',(169.546107,-83.322322,1.585)); +#195958 = LINE('',#195959,#195960); +#195959 = CARTESIAN_POINT('',(169.317699,-82.996025,1.585)); +#195960 = VECTOR('',#195961,1.); +#195961 = DIRECTION('',(0.573462512866,-0.819231802567,0.)); +#195962 = ORIENTED_EDGE('',*,*,#195963,.T.); +#195963 = EDGE_CURVE('',#195956,#195964,#195966,.T.); +#195964 = VERTEX_POINT('',#195965); +#195965 = CARTESIAN_POINT('',(169.439607,-83.396872,1.585)); +#195966 = CIRCLE('',#195967,6.499990865385E-02); +#195967 = AXIS2_PLACEMENT_3D('',#195968,#195969,#195970); +#195968 = CARTESIAN_POINT('',(169.49285705055,-83.35959707222,1.585)); +#195969 = DIRECTION('',(0.,0.,-1.)); +#195970 = DIRECTION('',(0.819231142687,0.573463455551,0.)); +#195971 = ORIENTED_EDGE('',*,*,#195972,.T.); +#195972 = EDGE_CURVE('',#195964,#195973,#195975,.T.); +#195973 = VERTEX_POINT('',#195974); +#195974 = CARTESIAN_POINT('',(169.159014,-82.996025,1.585)); +#195975 = LINE('',#195976,#195977); +#195976 = CARTESIAN_POINT('',(169.439607,-83.396872,1.585)); +#195977 = VECTOR('',#195978,1.); +#195978 = DIRECTION('',(-0.573462481528,0.819231824504,0.)); +#195979 = ORIENTED_EDGE('',*,*,#195980,.T.); +#195980 = EDGE_CURVE('',#195973,#195981,#195983,.T.); +#195981 = VERTEX_POINT('',#195982); +#195982 = CARTESIAN_POINT('',(169.043571,-82.996025,1.585)); +#195983 = LINE('',#195984,#195985); +#195984 = CARTESIAN_POINT('',(169.159014,-82.996025,1.585)); +#195985 = VECTOR('',#195986,1.); +#195986 = DIRECTION('',(-1.,0.,0.)); +#195987 = ORIENTED_EDGE('',*,*,#195988,.T.); +#195988 = EDGE_CURVE('',#195981,#195989,#195991,.T.); +#195989 = VERTEX_POINT('',#195990); +#195990 = CARTESIAN_POINT('',(169.043571,-83.359597,1.585)); +#195991 = LINE('',#195992,#195993); +#195992 = CARTESIAN_POINT('',(169.043571,-82.996025,1.585)); +#195993 = VECTOR('',#195994,1.); +#195994 = DIRECTION('',(0.,-1.,0.)); +#195995 = ORIENTED_EDGE('',*,*,#195996,.T.); +#195996 = EDGE_CURVE('',#195989,#195997,#195999,.T.); +#195997 = VERTEX_POINT('',#195998); +#195998 = CARTESIAN_POINT('',(168.913571,-83.359597,1.585)); +#195999 = CIRCLE('',#196000,6.500000000091E-02); +#196000 = AXIS2_PLACEMENT_3D('',#196001,#196002,#196003); +#196001 = CARTESIAN_POINT('',(168.978571,-83.35959665513,1.585)); +#196002 = DIRECTION('',(-0.,0.,-1.)); +#196003 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#196004 = ORIENTED_EDGE('',*,*,#196005,.T.); +#196005 = EDGE_CURVE('',#195997,#195880,#196006,.T.); +#196006 = LINE('',#196007,#196008); +#196007 = CARTESIAN_POINT('',(168.913571,-83.359597,1.585)); +#196008 = VECTOR('',#196009,1.); +#196009 = DIRECTION('',(0.,1.,0.)); +#196010 = FACE_BOUND('',#196011,.F.); +#196011 = EDGE_LOOP('',(#196012,#196023,#196031,#196039,#196047,#196056) + ); +#196012 = ORIENTED_EDGE('',*,*,#196013,.T.); +#196013 = EDGE_CURVE('',#196014,#196016,#196018,.T.); +#196014 = VERTEX_POINT('',#196015); +#196015 = CARTESIAN_POINT('',(169.427857,-82.64637,1.585)); +#196016 = VERTEX_POINT('',#196017); +#196017 = CARTESIAN_POINT('',(169.306083,-82.524597,1.585)); +#196018 = CIRCLE('',#196019,0.17099627894); +#196019 = AXIS2_PLACEMENT_3D('',#196020,#196021,#196022); +#196020 = CARTESIAN_POINT('',(169.2625067157,-82.68994764214,1.585)); +#196021 = DIRECTION('',(0.,0.,1.)); +#196022 = DIRECTION('',(0.966981768956,0.254845558145,-0.)); +#196023 = ORIENTED_EDGE('',*,*,#196024,.T.); +#196024 = EDGE_CURVE('',#196016,#196025,#196027,.T.); +#196025 = VERTEX_POINT('',#196026); +#196026 = CARTESIAN_POINT('',(169.043571,-82.524597,1.585)); +#196027 = LINE('',#196028,#196029); +#196028 = CARTESIAN_POINT('',(169.306083,-82.524597,1.585)); +#196029 = VECTOR('',#196030,1.); +#196030 = DIRECTION('',(-1.,0.,0.)); +#196031 = ORIENTED_EDGE('',*,*,#196032,.T.); +#196032 = EDGE_CURVE('',#196025,#196033,#196035,.T.); +#196033 = VERTEX_POINT('',#196034); +#196034 = CARTESIAN_POINT('',(169.043571,-82.866025,1.585)); +#196035 = LINE('',#196036,#196037); +#196036 = CARTESIAN_POINT('',(169.043571,-82.524597,1.585)); +#196037 = VECTOR('',#196038,1.); +#196038 = DIRECTION('',(0.,-1.,0.)); +#196039 = ORIENTED_EDGE('',*,*,#196040,.T.); +#196040 = EDGE_CURVE('',#196033,#196041,#196043,.T.); +#196041 = VERTEX_POINT('',#196042); +#196042 = CARTESIAN_POINT('',(169.306083,-82.866025,1.585)); +#196043 = LINE('',#196044,#196045); +#196044 = CARTESIAN_POINT('',(169.043571,-82.866025,1.585)); +#196045 = VECTOR('',#196046,1.); +#196046 = DIRECTION('',(1.,0.,0.)); +#196047 = ORIENTED_EDGE('',*,*,#196048,.T.); +#196048 = EDGE_CURVE('',#196041,#196049,#196051,.T.); +#196049 = VERTEX_POINT('',#196050); +#196050 = CARTESIAN_POINT('',(169.427857,-82.744252,1.585)); +#196051 = CIRCLE('',#196052,0.171001125777); +#196052 = AXIS2_PLACEMENT_3D('',#196053,#196054,#196055); +#196053 = CARTESIAN_POINT('',(169.26250274885,-82.70067039097,1.585)); +#196054 = DIRECTION('',(0.,0.,1.)); +#196055 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#196056 = ORIENTED_EDGE('',*,*,#196057,.T.); +#196057 = EDGE_CURVE('',#196049,#196014,#196058,.T.); +#196058 = LINE('',#196059,#196060); +#196059 = CARTESIAN_POINT('',(169.427857,-82.744252,1.585)); +#196060 = VECTOR('',#196061,1.); +#196061 = DIRECTION('',(0.,1.,0.)); +#196062 = PLANE('',#196063); +#196063 = AXIS2_PLACEMENT_3D('',#196064,#196065,#196066); +#196064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196065 = DIRECTION('',(0.,0.,1.)); +#196066 = DIRECTION('',(1.,0.,-0.)); +#196067 = SHELL_BASED_SURFACE_MODEL('',(#196068)); +#196068 = OPEN_SHELL('',(#196069)); +#196069 = ADVANCED_FACE('',(#196070),#196334,.T.); +#196070 = FACE_BOUND('',#196071,.F.); +#196071 = EDGE_LOOP('',(#196072,#196082,#196090,#196098,#196107,#196115, + #196123,#196132,#196140,#196148,#196156,#196164,#196172,#196180, + #196188,#196197,#196205,#196213,#196221,#196229,#196238,#196246, + #196254,#196263,#196271,#196279,#196287,#196295,#196303,#196311, + #196319,#196328)); +#196072 = ORIENTED_EDGE('',*,*,#196073,.T.); +#196073 = EDGE_CURVE('',#196074,#196076,#196078,.T.); +#196074 = VERTEX_POINT('',#196075); +#196075 = CARTESIAN_POINT('',(170.698416,-82.450702,1.585)); +#196076 = VERTEX_POINT('',#196077); +#196077 = CARTESIAN_POINT('',(170.806772,-82.397512,1.585)); +#196078 = LINE('',#196079,#196080); +#196079 = CARTESIAN_POINT('',(170.698416,-82.450702,1.585)); +#196080 = VECTOR('',#196081,1.); +#196081 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#196082 = ORIENTED_EDGE('',*,*,#196083,.T.); +#196083 = EDGE_CURVE('',#196076,#196084,#196086,.T.); +#196084 = VERTEX_POINT('',#196085); +#196085 = CARTESIAN_POINT('',(171.045936,-82.39663,1.585)); +#196086 = LINE('',#196087,#196088); +#196087 = CARTESIAN_POINT('',(170.806772,-82.397512,1.585)); +#196088 = VECTOR('',#196089,1.); +#196089 = DIRECTION('',(0.999993199965,3.687820919426E-03,0.)); +#196090 = ORIENTED_EDGE('',*,*,#196091,.T.); +#196091 = EDGE_CURVE('',#196084,#196092,#196094,.T.); +#196092 = VERTEX_POINT('',#196093); +#196093 = CARTESIAN_POINT('',(171.184841,-82.44079,1.585)); +#196094 = LINE('',#196095,#196096); +#196095 = CARTESIAN_POINT('',(171.045936,-82.39663,1.585)); +#196096 = VECTOR('',#196097,1.); +#196097 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#196098 = ORIENTED_EDGE('',*,*,#196099,.T.); +#196099 = EDGE_CURVE('',#196092,#196100,#196102,.T.); +#196100 = VERTEX_POINT('',#196101); +#196101 = CARTESIAN_POINT('',(171.143732,-82.564119,1.585)); +#196102 = CIRCLE('',#196103,6.499998485859E-02); +#196103 = AXIS2_PLACEMENT_3D('',#196104,#196105,#196106); +#196104 = CARTESIAN_POINT('',(171.16428549751,-82.50245416584,1.585)); +#196105 = DIRECTION('',(0.,0.,-1.)); +#196106 = DIRECTION('',(0.316238573438,0.948679695508,0.)); +#196107 = ORIENTED_EDGE('',*,*,#196108,.T.); +#196108 = EDGE_CURVE('',#196100,#196109,#196111,.T.); +#196109 = VERTEX_POINT('',#196110); +#196110 = CARTESIAN_POINT('',(171.025167,-82.524597,1.585)); +#196111 = LINE('',#196112,#196113); +#196112 = CARTESIAN_POINT('',(171.143732,-82.564119,1.585)); +#196113 = VECTOR('',#196114,1.); +#196114 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#196115 = ORIENTED_EDGE('',*,*,#196116,.T.); +#196116 = EDGE_CURVE('',#196109,#196117,#196119,.T.); +#196117 = VERTEX_POINT('',#196118); +#196118 = CARTESIAN_POINT('',(170.836774,-82.524597,1.585)); +#196119 = LINE('',#196120,#196121); +#196120 = CARTESIAN_POINT('',(171.025167,-82.524597,1.585)); +#196121 = VECTOR('',#196122,1.); +#196122 = DIRECTION('',(-1.,0.,0.)); +#196123 = ORIENTED_EDGE('',*,*,#196124,.T.); +#196124 = EDGE_CURVE('',#196117,#196125,#196127,.T.); +#196125 = VERTEX_POINT('',#196126); +#196126 = CARTESIAN_POINT('',(170.715,-82.64637,1.585)); +#196127 = CIRCLE('',#196128,0.170991742693); +#196128 = AXIS2_PLACEMENT_3D('',#196129,#196130,#196131); +#196129 = CARTESIAN_POINT('',(170.88034657161,-82.68994392943,1.585)); +#196130 = DIRECTION('',(0.,0.,1.)); +#196131 = DIRECTION('',(-0.254822665257,0.966987802028,0.)); +#196132 = ORIENTED_EDGE('',*,*,#196133,.T.); +#196133 = EDGE_CURVE('',#196125,#196134,#196136,.T.); +#196134 = VERTEX_POINT('',#196135); +#196135 = CARTESIAN_POINT('',(170.715,-82.701395,1.585)); +#196136 = LINE('',#196137,#196138); +#196137 = CARTESIAN_POINT('',(170.715,-82.64637,1.585)); +#196138 = VECTOR('',#196139,1.); +#196139 = DIRECTION('',(0.,-1.,0.)); +#196140 = ORIENTED_EDGE('',*,*,#196141,.T.); +#196141 = EDGE_CURVE('',#196134,#196142,#196144,.T.); +#196142 = VERTEX_POINT('',#196143); +#196143 = CARTESIAN_POINT('',(170.746278,-82.763951,1.585)); +#196144 = LINE('',#196145,#196146); +#196145 = CARTESIAN_POINT('',(170.715,-82.701395,1.585)); +#196146 = VECTOR('',#196147,1.); +#196147 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#196148 = ORIENTED_EDGE('',*,*,#196149,.T.); +#196149 = EDGE_CURVE('',#196142,#196150,#196152,.T.); +#196150 = VERTEX_POINT('',#196151); +#196151 = CARTESIAN_POINT('',(170.774216,-82.791889,1.585)); +#196152 = LINE('',#196153,#196154); +#196153 = CARTESIAN_POINT('',(170.746278,-82.763951,1.585)); +#196154 = VECTOR('',#196155,1.); +#196155 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#196156 = ORIENTED_EDGE('',*,*,#196157,.T.); +#196157 = EDGE_CURVE('',#196150,#196158,#196160,.T.); +#196158 = VERTEX_POINT('',#196159); +#196159 = CARTESIAN_POINT('',(170.844117,-82.826839,1.585)); +#196160 = LINE('',#196161,#196162); +#196161 = CARTESIAN_POINT('',(170.774216,-82.791889,1.585)); +#196162 = VECTOR('',#196163,1.); +#196163 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#196164 = ORIENTED_EDGE('',*,*,#196165,.T.); +#196165 = EDGE_CURVE('',#196158,#196166,#196168,.T.); +#196166 = VERTEX_POINT('',#196167); +#196167 = CARTESIAN_POINT('',(171.021926,-82.872887,1.585)); +#196168 = LINE('',#196169,#196170); +#196169 = CARTESIAN_POINT('',(170.844117,-82.826839,1.585)); +#196170 = VECTOR('',#196171,1.); +#196171 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#196172 = ORIENTED_EDGE('',*,*,#196173,.T.); +#196173 = EDGE_CURVE('',#196166,#196174,#196176,.T.); +#196174 = VERTEX_POINT('',#196175); +#196175 = CARTESIAN_POINT('',(171.124534,-82.927921,1.585)); +#196176 = LINE('',#196177,#196178); +#196177 = CARTESIAN_POINT('',(171.021926,-82.872887,1.585)); +#196178 = VECTOR('',#196179,1.); +#196179 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#196180 = ORIENTED_EDGE('',*,*,#196181,.T.); +#196181 = EDGE_CURVE('',#196174,#196182,#196184,.T.); +#196182 = VERTEX_POINT('',#196183); +#196183 = CARTESIAN_POINT('',(171.179567,-82.987671,1.585)); +#196184 = LINE('',#196185,#196186); +#196185 = CARTESIAN_POINT('',(171.124534,-82.927921,1.585)); +#196186 = VECTOR('',#196187,1.); +#196187 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#196188 = ORIENTED_EDGE('',*,*,#196189,.T.); +#196189 = EDGE_CURVE('',#196182,#196190,#196192,.T.); +#196190 = VERTEX_POINT('',#196191); +#196191 = CARTESIAN_POINT('',(171.173179,-83.31118,1.585)); +#196192 = CIRCLE('',#196193,0.260194262446); +#196193 = AXIS2_PLACEMENT_3D('',#196194,#196195,#196196); +#196194 = CARTESIAN_POINT('',(170.97263260304,-83.14540244761,1.585)); +#196195 = DIRECTION('',(0.,0.,-1.)); +#196196 = DIRECTION('',(0.795307302373,0.606206478679,0.)); +#196197 = ORIENTED_EDGE('',*,*,#196198,.T.); +#196198 = EDGE_CURVE('',#196190,#196199,#196201,.T.); +#196199 = VERTEX_POINT('',#196200); +#196200 = CARTESIAN_POINT('',(171.115879,-83.368484,1.585)); +#196201 = LINE('',#196202,#196203); +#196202 = CARTESIAN_POINT('',(171.173179,-83.31118,1.585)); +#196203 = VECTOR('',#196204,1.); +#196204 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#196205 = ORIENTED_EDGE('',*,*,#196206,.T.); +#196206 = EDGE_CURVE('',#196199,#196207,#196209,.T.); +#196207 = VERTEX_POINT('',#196208); +#196208 = CARTESIAN_POINT('',(171.007513,-83.421681,1.585)); +#196209 = LINE('',#196210,#196211); +#196210 = CARTESIAN_POINT('',(171.115879,-83.368484,1.585)); +#196211 = VECTOR('',#196212,1.); +#196212 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#196213 = ORIENTED_EDGE('',*,*,#196214,.T.); +#196214 = EDGE_CURVE('',#196207,#196215,#196217,.T.); +#196215 = VERTEX_POINT('',#196216); +#196216 = CARTESIAN_POINT('',(170.768356,-83.422564,1.585)); +#196217 = LINE('',#196218,#196219); +#196218 = CARTESIAN_POINT('',(171.007513,-83.421681,1.585)); +#196219 = VECTOR('',#196220,1.); +#196220 = DIRECTION('',(-0.999993184138,-3.692110126744E-03,0.)); +#196221 = ORIENTED_EDGE('',*,*,#196222,.T.); +#196222 = EDGE_CURVE('',#196215,#196223,#196225,.T.); +#196223 = VERTEX_POINT('',#196224); +#196224 = CARTESIAN_POINT('',(170.629445,-83.378404,1.585)); +#196225 = LINE('',#196226,#196227); +#196226 = CARTESIAN_POINT('',(170.768356,-83.422564,1.585)); +#196227 = VECTOR('',#196228,1.); +#196228 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#196229 = ORIENTED_EDGE('',*,*,#196230,.T.); +#196230 = EDGE_CURVE('',#196223,#196231,#196233,.T.); +#196231 = VERTEX_POINT('',#196232); +#196232 = CARTESIAN_POINT('',(170.670555,-83.255076,1.585)); +#196233 = CIRCLE('',#196234,6.499966862238E-02); +#196234 = AXIS2_PLACEMENT_3D('',#196235,#196236,#196237); +#196235 = CARTESIAN_POINT('',(170.65000012923,-83.31674004307,1.585)); +#196236 = DIRECTION('',(0.,0.,-1.)); +#196237 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#196238 = ORIENTED_EDGE('',*,*,#196239,.T.); +#196239 = EDGE_CURVE('',#196231,#196240,#196242,.T.); +#196240 = VERTEX_POINT('',#196241); +#196241 = CARTESIAN_POINT('',(170.789119,-83.294597,1.585)); +#196242 = LINE('',#196243,#196244); +#196243 = CARTESIAN_POINT('',(170.670555,-83.255076,1.585)); +#196244 = VECTOR('',#196245,1.); +#196245 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#196246 = ORIENTED_EDGE('',*,*,#196247,.T.); +#196247 = EDGE_CURVE('',#196240,#196248,#196250,.T.); +#196248 = VERTEX_POINT('',#196249); +#196249 = CARTESIAN_POINT('',(170.977512,-83.294597,1.585)); +#196250 = LINE('',#196251,#196252); +#196251 = CARTESIAN_POINT('',(170.789119,-83.294597,1.585)); +#196252 = VECTOR('',#196253,1.); +#196253 = DIRECTION('',(1.,0.,0.)); +#196254 = ORIENTED_EDGE('',*,*,#196255,.T.); +#196255 = EDGE_CURVE('',#196248,#196256,#196258,.T.); +#196256 = VERTEX_POINT('',#196257); +#196257 = CARTESIAN_POINT('',(171.099286,-83.172823,1.585)); +#196258 = CIRCLE('',#196259,0.170996196456); +#196259 = AXIS2_PLACEMENT_3D('',#196260,#196261,#196262); +#196260 = CARTESIAN_POINT('',(170.9339355,-83.1292465,1.585)); +#196261 = DIRECTION('',(0.,0.,1.)); +#196262 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#196263 = ORIENTED_EDGE('',*,*,#196264,.T.); +#196264 = EDGE_CURVE('',#196256,#196265,#196267,.T.); +#196265 = VERTEX_POINT('',#196266); +#196266 = CARTESIAN_POINT('',(171.099286,-83.117799,1.585)); +#196267 = LINE('',#196268,#196269); +#196268 = CARTESIAN_POINT('',(171.099286,-83.172823,1.585)); +#196269 = VECTOR('',#196270,1.); +#196270 = DIRECTION('',(0.,1.,0.)); +#196271 = ORIENTED_EDGE('',*,*,#196272,.T.); +#196272 = EDGE_CURVE('',#196265,#196273,#196275,.T.); +#196273 = VERTEX_POINT('',#196274); +#196274 = CARTESIAN_POINT('',(171.068007,-83.055242,1.585)); +#196275 = LINE('',#196276,#196277); +#196276 = CARTESIAN_POINT('',(171.099286,-83.117799,1.585)); +#196277 = VECTOR('',#196278,1.); +#196278 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#196279 = ORIENTED_EDGE('',*,*,#196280,.T.); +#196280 = EDGE_CURVE('',#196273,#196281,#196283,.T.); +#196281 = VERTEX_POINT('',#196282); +#196282 = CARTESIAN_POINT('',(171.04007,-83.027303,1.585)); +#196283 = LINE('',#196284,#196285); +#196284 = CARTESIAN_POINT('',(171.068007,-83.055242,1.585)); +#196285 = VECTOR('',#196286,1.); +#196286 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#196287 = ORIENTED_EDGE('',*,*,#196288,.T.); +#196288 = EDGE_CURVE('',#196281,#196289,#196291,.T.); +#196289 = VERTEX_POINT('',#196290); +#196290 = CARTESIAN_POINT('',(170.970168,-82.992353,1.585)); +#196291 = LINE('',#196292,#196293); +#196292 = CARTESIAN_POINT('',(171.04007,-83.027303,1.585)); +#196293 = VECTOR('',#196294,1.); +#196294 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#196295 = ORIENTED_EDGE('',*,*,#196296,.T.); +#196296 = EDGE_CURVE('',#196289,#196297,#196299,.T.); +#196297 = VERTEX_POINT('',#196298); +#196298 = CARTESIAN_POINT('',(170.79236,-82.946306,1.585)); +#196299 = LINE('',#196300,#196301); +#196300 = CARTESIAN_POINT('',(170.970168,-82.992353,1.585)); +#196301 = VECTOR('',#196302,1.); +#196302 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#196303 = ORIENTED_EDGE('',*,*,#196304,.T.); +#196304 = EDGE_CURVE('',#196297,#196305,#196307,.T.); +#196305 = VERTEX_POINT('',#196306); +#196306 = CARTESIAN_POINT('',(170.689752,-82.891273,1.585)); +#196307 = LINE('',#196308,#196309); +#196308 = CARTESIAN_POINT('',(170.79236,-82.946306,1.585)); +#196309 = VECTOR('',#196310,1.); +#196310 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#196311 = ORIENTED_EDGE('',*,*,#196312,.T.); +#196312 = EDGE_CURVE('',#196305,#196313,#196315,.T.); +#196313 = VERTEX_POINT('',#196314); +#196314 = CARTESIAN_POINT('',(170.634719,-82.831523,1.585)); +#196315 = LINE('',#196316,#196317); +#196316 = CARTESIAN_POINT('',(170.689752,-82.891273,1.585)); +#196317 = VECTOR('',#196318,1.); +#196318 = DIRECTION('',(-0.677476455829,0.735544459429,0.)); +#196319 = ORIENTED_EDGE('',*,*,#196320,.T.); +#196320 = EDGE_CURVE('',#196313,#196321,#196323,.T.); +#196321 = VERTEX_POINT('',#196322); +#196322 = CARTESIAN_POINT('',(170.641105,-82.508013,1.585)); +#196323 = CIRCLE('',#196324,0.260194992517); +#196324 = AXIS2_PLACEMENT_3D('',#196325,#196326,#196327); +#196325 = CARTESIAN_POINT('',(170.84165297292,-82.67378979176,1.585)); +#196326 = DIRECTION('',(0.,0.,-1.)); +#196327 = DIRECTION('',(-0.795303441169,-0.606211544319,-0.)); +#196328 = ORIENTED_EDGE('',*,*,#196329,.T.); +#196329 = EDGE_CURVE('',#196321,#196074,#196330,.T.); +#196330 = LINE('',#196331,#196332); +#196331 = CARTESIAN_POINT('',(170.641105,-82.508013,1.585)); +#196332 = VECTOR('',#196333,1.); +#196333 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#196334 = PLANE('',#196335); +#196335 = AXIS2_PLACEMENT_3D('',#196336,#196337,#196338); +#196336 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196337 = DIRECTION('',(0.,0.,1.)); +#196338 = DIRECTION('',(1.,0.,-0.)); +#196339 = SHELL_BASED_SURFACE_MODEL('',(#196340)); +#196340 = OPEN_SHELL('',(#196341)); +#196341 = ADVANCED_FACE('',(#196342),#196411,.T.); +#196342 = FACE_BOUND('',#196343,.F.); +#196343 = EDGE_LOOP('',(#196344,#196355,#196363,#196372,#196380,#196388, + #196397,#196405)); +#196344 = ORIENTED_EDGE('',*,*,#196345,.T.); +#196345 = EDGE_CURVE('',#196346,#196348,#196350,.T.); +#196346 = VERTEX_POINT('',#196347); +#196347 = CARTESIAN_POINT('',(172.235715,-82.524597,1.585)); +#196348 = VERTEX_POINT('',#196349); +#196349 = CARTESIAN_POINT('',(172.235715,-82.394597,1.585)); +#196350 = CIRCLE('',#196351,6.500000000091E-02); +#196351 = AXIS2_PLACEMENT_3D('',#196352,#196353,#196354); +#196352 = CARTESIAN_POINT('',(172.23571534486,-82.459597,1.585)); +#196353 = DIRECTION('',(0.,0.,-1.)); +#196354 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#196355 = ORIENTED_EDGE('',*,*,#196356,.T.); +#196356 = EDGE_CURVE('',#196348,#196357,#196359,.T.); +#196357 = VERTEX_POINT('',#196358); +#196358 = CARTESIAN_POINT('',(172.750001,-82.394597,1.585)); +#196359 = LINE('',#196360,#196361); +#196360 = CARTESIAN_POINT('',(172.235715,-82.394597,1.585)); +#196361 = VECTOR('',#196362,1.); +#196362 = DIRECTION('',(1.,0.,0.)); +#196363 = ORIENTED_EDGE('',*,*,#196364,.T.); +#196364 = EDGE_CURVE('',#196357,#196365,#196367,.T.); +#196365 = VERTEX_POINT('',#196366); +#196366 = CARTESIAN_POINT('',(172.750001,-82.524597,1.585)); +#196367 = CIRCLE('',#196368,6.500000000091E-02); +#196368 = AXIS2_PLACEMENT_3D('',#196369,#196370,#196371); +#196369 = CARTESIAN_POINT('',(172.75000065513,-82.459597,1.585)); +#196370 = DIRECTION('',(0.,0.,-1.)); +#196371 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#196372 = ORIENTED_EDGE('',*,*,#196373,.T.); +#196373 = EDGE_CURVE('',#196365,#196374,#196376,.T.); +#196374 = VERTEX_POINT('',#196375); +#196375 = CARTESIAN_POINT('',(172.557858,-82.524597,1.585)); +#196376 = LINE('',#196377,#196378); +#196377 = CARTESIAN_POINT('',(172.750001,-82.524597,1.585)); +#196378 = VECTOR('',#196379,1.); +#196379 = DIRECTION('',(-1.,0.,0.)); +#196380 = ORIENTED_EDGE('',*,*,#196381,.T.); +#196381 = EDGE_CURVE('',#196374,#196382,#196384,.T.); +#196382 = VERTEX_POINT('',#196383); +#196383 = CARTESIAN_POINT('',(172.557858,-83.359597,1.585)); +#196384 = LINE('',#196385,#196386); +#196385 = CARTESIAN_POINT('',(172.557858,-82.524597,1.585)); +#196386 = VECTOR('',#196387,1.); +#196387 = DIRECTION('',(0.,-1.,0.)); +#196388 = ORIENTED_EDGE('',*,*,#196389,.T.); +#196389 = EDGE_CURVE('',#196382,#196390,#196392,.T.); +#196390 = VERTEX_POINT('',#196391); +#196391 = CARTESIAN_POINT('',(172.427858,-83.359597,1.585)); +#196392 = CIRCLE('',#196393,6.500000000093E-02); +#196393 = AXIS2_PLACEMENT_3D('',#196394,#196395,#196396); +#196394 = CARTESIAN_POINT('',(172.492858,-83.35959665513,1.585)); +#196395 = DIRECTION('',(-0.,0.,-1.)); +#196396 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#196397 = ORIENTED_EDGE('',*,*,#196398,.T.); +#196398 = EDGE_CURVE('',#196390,#196399,#196401,.T.); +#196399 = VERTEX_POINT('',#196400); +#196400 = CARTESIAN_POINT('',(172.427858,-82.524597,1.585)); +#196401 = LINE('',#196402,#196403); +#196402 = CARTESIAN_POINT('',(172.427858,-83.359597,1.585)); +#196403 = VECTOR('',#196404,1.); +#196404 = DIRECTION('',(0.,1.,0.)); +#196405 = ORIENTED_EDGE('',*,*,#196406,.T.); +#196406 = EDGE_CURVE('',#196399,#196346,#196407,.T.); +#196407 = LINE('',#196408,#196409); +#196408 = CARTESIAN_POINT('',(172.427858,-82.524597,1.585)); +#196409 = VECTOR('',#196410,1.); +#196410 = DIRECTION('',(-1.,0.,0.)); +#196411 = PLANE('',#196412); +#196412 = AXIS2_PLACEMENT_3D('',#196413,#196414,#196415); +#196413 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196414 = DIRECTION('',(0.,0.,1.)); +#196415 = DIRECTION('',(1.,0.,-0.)); +#196416 = SHELL_BASED_SURFACE_MODEL('',(#196417)); +#196417 = OPEN_SHELL('',(#196418)); +#196418 = ADVANCED_FACE('',(#196419),#196488,.T.); +#196419 = FACE_BOUND('',#196420,.F.); +#196420 = EDGE_LOOP('',(#196421,#196432,#196440,#196448,#196457,#196465, + #196474,#196482)); +#196421 = ORIENTED_EDGE('',*,*,#196422,.T.); +#196422 = EDGE_CURVE('',#196423,#196425,#196427,.T.); +#196423 = VERTEX_POINT('',#196424); +#196424 = CARTESIAN_POINT('',(207.361217,-81.650139,1.585)); +#196425 = VERTEX_POINT('',#196426); +#196426 = CARTESIAN_POINT('',(207.47665,-81.6731,1.585)); +#196427 = CIRCLE('',#196428,6.000007318647E-02); +#196428 = AXIS2_PLACEMENT_3D('',#196429,#196430,#196431); +#196429 = CARTESIAN_POINT('',(207.41664992681,-81.67309982331,1.585)); +#196430 = DIRECTION('',(0.,0.,-1.)); +#196431 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#196432 = ORIENTED_EDGE('',*,*,#196433,.T.); +#196433 = EDGE_CURVE('',#196425,#196434,#196436,.T.); +#196434 = VERTEX_POINT('',#196435); +#196435 = CARTESIAN_POINT('',(207.47665,-82.8631,1.585)); +#196436 = LINE('',#196437,#196438); +#196437 = CARTESIAN_POINT('',(207.47665,-81.6731,1.585)); +#196438 = VECTOR('',#196439,1.); +#196439 = DIRECTION('',(0.,-1.,0.)); +#196440 = ORIENTED_EDGE('',*,*,#196441,.T.); +#196441 = EDGE_CURVE('',#196434,#196442,#196444,.T.); +#196442 = VERTEX_POINT('',#196443); +#196443 = CARTESIAN_POINT('',(208.66665,-82.8631,1.585)); +#196444 = LINE('',#196445,#196446); +#196445 = CARTESIAN_POINT('',(207.47665,-82.8631,1.585)); +#196446 = VECTOR('',#196447,1.); +#196447 = DIRECTION('',(1.,0.,0.)); +#196448 = ORIENTED_EDGE('',*,*,#196449,.T.); +#196449 = EDGE_CURVE('',#196442,#196450,#196452,.T.); +#196450 = VERTEX_POINT('',#196451); +#196451 = CARTESIAN_POINT('',(208.66665,-82.9831,1.585)); +#196452 = CIRCLE('',#196453,6.000000000042E-02); +#196453 = AXIS2_PLACEMENT_3D('',#196454,#196455,#196456); +#196454 = CARTESIAN_POINT('',(208.66665022558,-82.9231,1.585)); +#196455 = DIRECTION('',(0.,0.,-1.)); +#196456 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#196457 = ORIENTED_EDGE('',*,*,#196458,.T.); +#196458 = EDGE_CURVE('',#196450,#196459,#196461,.T.); +#196459 = VERTEX_POINT('',#196460); +#196460 = CARTESIAN_POINT('',(207.41665,-82.9831,1.585)); +#196461 = LINE('',#196462,#196463); +#196462 = CARTESIAN_POINT('',(208.66665,-82.9831,1.585)); +#196463 = VECTOR('',#196464,1.); +#196464 = DIRECTION('',(-1.,0.,0.)); +#196465 = ORIENTED_EDGE('',*,*,#196466,.T.); +#196466 = EDGE_CURVE('',#196459,#196467,#196469,.T.); +#196467 = VERTEX_POINT('',#196468); +#196468 = CARTESIAN_POINT('',(207.35665,-82.9231,1.585)); +#196469 = CIRCLE('',#196470,5.999932016257E-02); +#196470 = AXIS2_PLACEMENT_3D('',#196471,#196472,#196473); +#196471 = CARTESIAN_POINT('',(207.41664932015,-82.92310067984,1.585)); +#196472 = DIRECTION('',(0.,0.,-1.)); +#196473 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#196474 = ORIENTED_EDGE('',*,*,#196475,.T.); +#196475 = EDGE_CURVE('',#196467,#196476,#196478,.T.); +#196476 = VERTEX_POINT('',#196477); +#196477 = CARTESIAN_POINT('',(207.35665,-81.6731,1.585)); +#196478 = LINE('',#196479,#196480); +#196479 = CARTESIAN_POINT('',(207.35665,-82.9231,1.585)); +#196480 = VECTOR('',#196481,1.); +#196481 = DIRECTION('',(0.,1.,0.)); +#196482 = ORIENTED_EDGE('',*,*,#196483,.T.); +#196483 = EDGE_CURVE('',#196476,#196423,#196484,.T.); +#196484 = LINE('',#196485,#196486); +#196485 = CARTESIAN_POINT('',(207.35665,-81.6731,1.585)); +#196486 = VECTOR('',#196487,1.); +#196487 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#196488 = PLANE('',#196489); +#196489 = AXIS2_PLACEMENT_3D('',#196490,#196491,#196492); +#196490 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196491 = DIRECTION('',(0.,0.,1.)); +#196492 = DIRECTION('',(1.,0.,-0.)); +#196493 = SHELL_BASED_SURFACE_MODEL('',(#196494)); +#196494 = OPEN_SHELL('',(#196495)); +#196495 = ADVANCED_FACE('',(#196496),#196532,.T.); +#196496 = FACE_BOUND('',#196497,.F.); +#196497 = EDGE_LOOP('',(#196498,#196509,#196517,#196526)); +#196498 = ORIENTED_EDGE('',*,*,#196499,.T.); +#196499 = EDGE_CURVE('',#196500,#196502,#196504,.T.); +#196500 = VERTEX_POINT('',#196501); +#196501 = CARTESIAN_POINT('',(101.45107,-82.8731,1.585)); +#196502 = VERTEX_POINT('',#196503); +#196503 = CARTESIAN_POINT('',(101.45107,-82.7531,1.585)); +#196504 = CIRCLE('',#196505,6.000000000042E-02); +#196505 = AXIS2_PLACEMENT_3D('',#196506,#196507,#196508); +#196506 = CARTESIAN_POINT('',(101.45106977441,-82.8131,1.585)); +#196507 = DIRECTION('',(0.,0.,-1.)); +#196508 = DIRECTION('',(3.759794490531E-06,-0.999999999993,0.)); +#196509 = ORIENTED_EDGE('',*,*,#196510,.T.); +#196510 = EDGE_CURVE('',#196502,#196511,#196513,.T.); +#196511 = VERTEX_POINT('',#196512); +#196512 = CARTESIAN_POINT('',(101.73223,-82.7531,1.585)); +#196513 = LINE('',#196514,#196515); +#196514 = CARTESIAN_POINT('',(101.45107,-82.7531,1.585)); +#196515 = VECTOR('',#196516,1.); +#196516 = DIRECTION('',(1.,0.,0.)); +#196517 = ORIENTED_EDGE('',*,*,#196518,.T.); +#196518 = EDGE_CURVE('',#196511,#196519,#196521,.T.); +#196519 = VERTEX_POINT('',#196520); +#196520 = CARTESIAN_POINT('',(101.73223,-82.8731,1.585)); +#196521 = CIRCLE('',#196522,6.000000000042E-02); +#196522 = AXIS2_PLACEMENT_3D('',#196523,#196524,#196525); +#196523 = CARTESIAN_POINT('',(101.73223022558,-82.8131,1.585)); +#196524 = DIRECTION('',(0.,0.,-1.)); +#196525 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#196526 = ORIENTED_EDGE('',*,*,#196527,.T.); +#196527 = EDGE_CURVE('',#196519,#196500,#196528,.T.); +#196528 = LINE('',#196529,#196530); +#196529 = CARTESIAN_POINT('',(101.73223,-82.8731,1.585)); +#196530 = VECTOR('',#196531,1.); +#196531 = DIRECTION('',(-1.,0.,0.)); +#196532 = PLANE('',#196533); +#196533 = AXIS2_PLACEMENT_3D('',#196534,#196535,#196536); +#196534 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196535 = DIRECTION('',(0.,0.,1.)); +#196536 = DIRECTION('',(1.,0.,-0.)); +#196537 = SHELL_BASED_SURFACE_MODEL('',(#196538)); +#196538 = OPEN_SHELL('',(#196539)); +#196539 = ADVANCED_FACE('',(#196540,#196610,#196794,#196878,#196912, + #196946),#196980,.T.); +#196540 = FACE_BOUND('',#196541,.F.); +#196541 = EDGE_LOOP('',(#196542,#196553,#196561,#196570,#196578,#196587, + #196595,#196604)); +#196542 = ORIENTED_EDGE('',*,*,#196543,.T.); +#196543 = EDGE_CURVE('',#196544,#196546,#196548,.T.); +#196544 = VERTEX_POINT('',#196545); +#196545 = CARTESIAN_POINT('',(207.64665,-75.0131,1.585)); +#196546 = VERTEX_POINT('',#196547); +#196547 = CARTESIAN_POINT('',(207.70665,-74.9531,1.585)); +#196548 = CIRCLE('',#196549,5.999932016262E-02); +#196549 = AXIS2_PLACEMENT_3D('',#196550,#196551,#196552); +#196550 = CARTESIAN_POINT('',(207.70664932015,-75.01309932015,1.585)); +#196551 = DIRECTION('',(0.,0.,-1.)); +#196552 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#196553 = ORIENTED_EDGE('',*,*,#196554,.T.); +#196554 = EDGE_CURVE('',#196546,#196555,#196557,.T.); +#196555 = VERTEX_POINT('',#196556); +#196556 = CARTESIAN_POINT('',(213.67665,-74.9531,1.585)); +#196557 = LINE('',#196558,#196559); +#196558 = CARTESIAN_POINT('',(207.70665,-74.9531,1.585)); +#196559 = VECTOR('',#196560,1.); +#196560 = DIRECTION('',(1.,0.,0.)); +#196561 = ORIENTED_EDGE('',*,*,#196562,.T.); +#196562 = EDGE_CURVE('',#196555,#196563,#196565,.T.); +#196563 = VERTEX_POINT('',#196564); +#196564 = CARTESIAN_POINT('',(213.73665,-75.0131,1.585)); +#196565 = CIRCLE('',#196566,5.999932016257E-02); +#196566 = AXIS2_PLACEMENT_3D('',#196567,#196568,#196569); +#196567 = CARTESIAN_POINT('',(213.67665067984,-75.01309932015,1.585)); +#196568 = DIRECTION('',(0.,0.,-1.)); +#196569 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#196570 = ORIENTED_EDGE('',*,*,#196571,.T.); +#196571 = EDGE_CURVE('',#196563,#196572,#196574,.T.); +#196572 = VERTEX_POINT('',#196573); +#196573 = CARTESIAN_POINT('',(213.73665,-82.6331,1.585)); +#196574 = LINE('',#196575,#196576); +#196575 = CARTESIAN_POINT('',(213.73665,-75.0131,1.585)); +#196576 = VECTOR('',#196577,1.); +#196577 = DIRECTION('',(0.,-1.,0.)); +#196578 = ORIENTED_EDGE('',*,*,#196579,.T.); +#196579 = EDGE_CURVE('',#196572,#196580,#196582,.T.); +#196580 = VERTEX_POINT('',#196581); +#196581 = CARTESIAN_POINT('',(213.67665,-82.6931,1.585)); +#196582 = CIRCLE('',#196583,5.999932016265E-02); +#196583 = AXIS2_PLACEMENT_3D('',#196584,#196585,#196586); +#196584 = CARTESIAN_POINT('',(213.67665067984,-82.63310067984,1.585)); +#196585 = DIRECTION('',(0.,0.,-1.)); +#196586 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#196587 = ORIENTED_EDGE('',*,*,#196588,.T.); +#196588 = EDGE_CURVE('',#196580,#196589,#196591,.T.); +#196589 = VERTEX_POINT('',#196590); +#196590 = CARTESIAN_POINT('',(207.70665,-82.6931,1.585)); +#196591 = LINE('',#196592,#196593); +#196592 = CARTESIAN_POINT('',(213.67665,-82.6931,1.585)); +#196593 = VECTOR('',#196594,1.); +#196594 = DIRECTION('',(-1.,0.,0.)); +#196595 = ORIENTED_EDGE('',*,*,#196596,.T.); +#196596 = EDGE_CURVE('',#196589,#196597,#196599,.T.); +#196597 = VERTEX_POINT('',#196598); +#196598 = CARTESIAN_POINT('',(207.64665,-82.6331,1.585)); +#196599 = CIRCLE('',#196600,5.999932016256E-02); +#196600 = AXIS2_PLACEMENT_3D('',#196601,#196602,#196603); +#196601 = CARTESIAN_POINT('',(207.70664932015,-82.63310067984,1.585)); +#196602 = DIRECTION('',(0.,0.,-1.)); +#196603 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#196604 = ORIENTED_EDGE('',*,*,#196605,.T.); +#196605 = EDGE_CURVE('',#196597,#196544,#196606,.T.); +#196606 = LINE('',#196607,#196608); +#196607 = CARTESIAN_POINT('',(207.64665,-82.6331,1.585)); +#196608 = VECTOR('',#196609,1.); +#196609 = DIRECTION('',(0.,1.,0.)); +#196610 = FACE_BOUND('',#196611,.F.); +#196611 = EDGE_LOOP('',(#196612,#196623,#196631,#196639,#196647,#196656, + #196664,#196672,#196680,#196689,#196697,#196706,#196714,#196722, + #196730,#196739,#196747,#196755,#196763,#196772,#196780,#196788)); +#196612 = ORIENTED_EDGE('',*,*,#196613,.T.); +#196613 = EDGE_CURVE('',#196614,#196616,#196618,.T.); +#196614 = VERTEX_POINT('',#196615); +#196615 = CARTESIAN_POINT('',(209.96665,-75.8331,1.585)); +#196616 = VERTEX_POINT('',#196617); +#196617 = CARTESIAN_POINT('',(209.90665,-75.7731,1.585)); +#196618 = CIRCLE('',#196619,5.999932016264E-02); +#196619 = AXIS2_PLACEMENT_3D('',#196620,#196621,#196622); +#196620 = CARTESIAN_POINT('',(209.96664932015,-75.77310067984,1.585)); +#196621 = DIRECTION('',(0.,0.,-1.)); +#196622 = DIRECTION('',(1.133081470032E-05,-0.999999999936,0.)); +#196623 = ORIENTED_EDGE('',*,*,#196624,.T.); +#196624 = EDGE_CURVE('',#196616,#196625,#196627,.T.); +#196625 = VERTEX_POINT('',#196626); +#196626 = CARTESIAN_POINT('',(209.90665,-75.0731,1.585)); +#196627 = LINE('',#196628,#196629); +#196628 = CARTESIAN_POINT('',(209.90665,-75.7731,1.585)); +#196629 = VECTOR('',#196630,1.); +#196630 = DIRECTION('',(0.,1.,0.)); +#196631 = ORIENTED_EDGE('',*,*,#196632,.T.); +#196632 = EDGE_CURVE('',#196625,#196633,#196635,.T.); +#196633 = VERTEX_POINT('',#196634); +#196634 = CARTESIAN_POINT('',(208.52665,-75.0731,1.585)); +#196635 = LINE('',#196636,#196637); +#196636 = CARTESIAN_POINT('',(209.90665,-75.0731,1.585)); +#196637 = VECTOR('',#196638,1.); +#196638 = DIRECTION('',(-1.,0.,0.)); +#196639 = ORIENTED_EDGE('',*,*,#196640,.T.); +#196640 = EDGE_CURVE('',#196633,#196641,#196643,.T.); +#196641 = VERTEX_POINT('',#196642); +#196642 = CARTESIAN_POINT('',(208.52665,-76.8231,1.585)); +#196643 = LINE('',#196644,#196645); +#196644 = CARTESIAN_POINT('',(208.52665,-75.0731,1.585)); +#196645 = VECTOR('',#196646,1.); +#196646 = DIRECTION('',(0.,-1.,0.)); +#196647 = ORIENTED_EDGE('',*,*,#196648,.T.); +#196648 = EDGE_CURVE('',#196641,#196649,#196651,.T.); +#196649 = VERTEX_POINT('',#196650); +#196650 = CARTESIAN_POINT('',(208.46665,-76.8831,1.585)); +#196651 = CIRCLE('',#196652,5.999932016251E-02); +#196652 = AXIS2_PLACEMENT_3D('',#196653,#196654,#196655); +#196653 = CARTESIAN_POINT('',(208.46665067984,-76.82310067984,1.585)); +#196654 = DIRECTION('',(0.,0.,-1.)); +#196655 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#196656 = ORIENTED_EDGE('',*,*,#196657,.T.); +#196657 = EDGE_CURVE('',#196649,#196658,#196660,.T.); +#196658 = VERTEX_POINT('',#196659); +#196659 = CARTESIAN_POINT('',(207.76665,-76.8831,1.585)); +#196660 = LINE('',#196661,#196662); +#196661 = CARTESIAN_POINT('',(208.46665,-76.8831,1.585)); +#196662 = VECTOR('',#196663,1.); +#196663 = DIRECTION('',(-1.,0.,0.)); +#196664 = ORIENTED_EDGE('',*,*,#196665,.T.); +#196665 = EDGE_CURVE('',#196658,#196666,#196668,.T.); +#196666 = VERTEX_POINT('',#196667); +#196667 = CARTESIAN_POINT('',(207.76665,-78.2631,1.585)); +#196668 = LINE('',#196669,#196670); +#196669 = CARTESIAN_POINT('',(207.76665,-76.8831,1.585)); +#196670 = VECTOR('',#196671,1.); +#196671 = DIRECTION('',(0.,-1.,0.)); +#196672 = ORIENTED_EDGE('',*,*,#196673,.T.); +#196673 = EDGE_CURVE('',#196666,#196674,#196676,.T.); +#196674 = VERTEX_POINT('',#196675); +#196675 = CARTESIAN_POINT('',(208.46665,-78.2631,1.585)); +#196676 = LINE('',#196677,#196678); +#196677 = CARTESIAN_POINT('',(207.76665,-78.2631,1.585)); +#196678 = VECTOR('',#196679,1.); +#196679 = DIRECTION('',(1.,0.,0.)); +#196680 = ORIENTED_EDGE('',*,*,#196681,.T.); +#196681 = EDGE_CURVE('',#196674,#196682,#196684,.T.); +#196682 = VERTEX_POINT('',#196683); +#196683 = CARTESIAN_POINT('',(208.52665,-78.3231,1.585)); +#196684 = CIRCLE('',#196685,5.999932016262E-02); +#196685 = AXIS2_PLACEMENT_3D('',#196686,#196687,#196688); +#196686 = CARTESIAN_POINT('',(208.46665067984,-78.32309932015,1.585)); +#196687 = DIRECTION('',(0.,0.,-1.)); +#196688 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#196689 = ORIENTED_EDGE('',*,*,#196690,.T.); +#196690 = EDGE_CURVE('',#196682,#196691,#196693,.T.); +#196691 = VERTEX_POINT('',#196692); +#196692 = CARTESIAN_POINT('',(208.52665,-79.3231,1.585)); +#196693 = LINE('',#196694,#196695); +#196694 = CARTESIAN_POINT('',(208.52665,-78.3231,1.585)); +#196695 = VECTOR('',#196696,1.); +#196696 = DIRECTION('',(0.,-1.,0.)); +#196697 = ORIENTED_EDGE('',*,*,#196698,.T.); +#196698 = EDGE_CURVE('',#196691,#196699,#196701,.T.); +#196699 = VERTEX_POINT('',#196700); +#196700 = CARTESIAN_POINT('',(208.46665,-79.3831,1.585)); +#196701 = CIRCLE('',#196702,5.999932016251E-02); +#196702 = AXIS2_PLACEMENT_3D('',#196703,#196704,#196705); +#196703 = CARTESIAN_POINT('',(208.46665067984,-79.32310067984,1.585)); +#196704 = DIRECTION('',(0.,0.,-1.)); +#196705 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#196706 = ORIENTED_EDGE('',*,*,#196707,.T.); +#196707 = EDGE_CURVE('',#196699,#196708,#196710,.T.); +#196708 = VERTEX_POINT('',#196709); +#196709 = CARTESIAN_POINT('',(207.76665,-79.3831,1.585)); +#196710 = LINE('',#196711,#196712); +#196711 = CARTESIAN_POINT('',(208.46665,-79.3831,1.585)); +#196712 = VECTOR('',#196713,1.); +#196713 = DIRECTION('',(-1.,0.,0.)); +#196714 = ORIENTED_EDGE('',*,*,#196715,.T.); +#196715 = EDGE_CURVE('',#196708,#196716,#196718,.T.); +#196716 = VERTEX_POINT('',#196717); +#196717 = CARTESIAN_POINT('',(207.76665,-80.7631,1.585)); +#196718 = LINE('',#196719,#196720); +#196719 = CARTESIAN_POINT('',(207.76665,-79.3831,1.585)); +#196720 = VECTOR('',#196721,1.); +#196721 = DIRECTION('',(0.,-1.,0.)); +#196722 = ORIENTED_EDGE('',*,*,#196723,.T.); +#196723 = EDGE_CURVE('',#196716,#196724,#196726,.T.); +#196724 = VERTEX_POINT('',#196725); +#196725 = CARTESIAN_POINT('',(208.46665,-80.7631,1.585)); +#196726 = LINE('',#196727,#196728); +#196727 = CARTESIAN_POINT('',(207.76665,-80.7631,1.585)); +#196728 = VECTOR('',#196729,1.); +#196729 = DIRECTION('',(1.,0.,0.)); +#196730 = ORIENTED_EDGE('',*,*,#196731,.T.); +#196731 = EDGE_CURVE('',#196724,#196732,#196734,.T.); +#196732 = VERTEX_POINT('',#196733); +#196733 = CARTESIAN_POINT('',(208.52665,-80.8231,1.585)); +#196734 = CIRCLE('',#196735,5.999932016262E-02); +#196735 = AXIS2_PLACEMENT_3D('',#196736,#196737,#196738); +#196736 = CARTESIAN_POINT('',(208.46665067984,-80.82309932015,1.585)); +#196737 = DIRECTION('',(0.,0.,-1.)); +#196738 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#196739 = ORIENTED_EDGE('',*,*,#196740,.T.); +#196740 = EDGE_CURVE('',#196732,#196741,#196743,.T.); +#196741 = VERTEX_POINT('',#196742); +#196742 = CARTESIAN_POINT('',(208.52665,-82.5731,1.585)); +#196743 = LINE('',#196744,#196745); +#196744 = CARTESIAN_POINT('',(208.52665,-80.8231,1.585)); +#196745 = VECTOR('',#196746,1.); +#196746 = DIRECTION('',(0.,-1.,0.)); +#196747 = ORIENTED_EDGE('',*,*,#196748,.T.); +#196748 = EDGE_CURVE('',#196741,#196749,#196751,.T.); +#196749 = VERTEX_POINT('',#196750); +#196750 = CARTESIAN_POINT('',(209.90665,-82.5731,1.585)); +#196751 = LINE('',#196752,#196753); +#196752 = CARTESIAN_POINT('',(208.52665,-82.5731,1.585)); +#196753 = VECTOR('',#196754,1.); +#196754 = DIRECTION('',(1.,0.,0.)); +#196755 = ORIENTED_EDGE('',*,*,#196756,.T.); +#196756 = EDGE_CURVE('',#196749,#196757,#196759,.T.); +#196757 = VERTEX_POINT('',#196758); +#196758 = CARTESIAN_POINT('',(209.90665,-81.8731,1.585)); +#196759 = LINE('',#196760,#196761); +#196760 = CARTESIAN_POINT('',(209.90665,-82.5731,1.585)); +#196761 = VECTOR('',#196762,1.); +#196762 = DIRECTION('',(0.,1.,0.)); +#196763 = ORIENTED_EDGE('',*,*,#196764,.T.); +#196764 = EDGE_CURVE('',#196757,#196765,#196767,.T.); +#196765 = VERTEX_POINT('',#196766); +#196766 = CARTESIAN_POINT('',(209.96665,-81.8131,1.585)); +#196767 = CIRCLE('',#196768,5.999932016253E-02); +#196768 = AXIS2_PLACEMENT_3D('',#196769,#196770,#196771); +#196769 = CARTESIAN_POINT('',(209.96664932015,-81.87309932015,1.585)); +#196770 = DIRECTION('',(0.,0.,-1.)); +#196771 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#196772 = ORIENTED_EDGE('',*,*,#196773,.T.); +#196773 = EDGE_CURVE('',#196765,#196774,#196776,.T.); +#196774 = VERTEX_POINT('',#196775); +#196775 = CARTESIAN_POINT('',(212.85665,-81.8131,1.585)); +#196776 = LINE('',#196777,#196778); +#196777 = CARTESIAN_POINT('',(209.96665,-81.8131,1.585)); +#196778 = VECTOR('',#196779,1.); +#196779 = DIRECTION('',(1.,0.,0.)); +#196780 = ORIENTED_EDGE('',*,*,#196781,.T.); +#196781 = EDGE_CURVE('',#196774,#196782,#196784,.T.); +#196782 = VERTEX_POINT('',#196783); +#196783 = CARTESIAN_POINT('',(212.85665,-75.8331,1.585)); +#196784 = LINE('',#196785,#196786); +#196785 = CARTESIAN_POINT('',(212.85665,-81.8131,1.585)); +#196786 = VECTOR('',#196787,1.); +#196787 = DIRECTION('',(0.,1.,0.)); +#196788 = ORIENTED_EDGE('',*,*,#196789,.T.); +#196789 = EDGE_CURVE('',#196782,#196614,#196790,.T.); +#196790 = LINE('',#196791,#196792); +#196791 = CARTESIAN_POINT('',(212.85665,-75.8331,1.585)); +#196792 = VECTOR('',#196793,1.); +#196793 = DIRECTION('',(-1.,0.,0.)); +#196794 = FACE_BOUND('',#196795,.F.); +#196795 = EDGE_LOOP('',(#196796,#196806,#196814,#196822,#196830,#196839, + #196847,#196856,#196864,#196872)); +#196796 = ORIENTED_EDGE('',*,*,#196797,.T.); +#196797 = EDGE_CURVE('',#196798,#196800,#196802,.T.); +#196798 = VERTEX_POINT('',#196799); +#196799 = CARTESIAN_POINT('',(213.61665,-82.5731,1.585)); +#196800 = VERTEX_POINT('',#196801); +#196801 = CARTESIAN_POINT('',(213.61665,-75.0731,1.585)); +#196802 = LINE('',#196803,#196804); +#196803 = CARTESIAN_POINT('',(213.61665,-82.5731,1.585)); +#196804 = VECTOR('',#196805,1.); +#196805 = DIRECTION('',(0.,1.,0.)); +#196806 = ORIENTED_EDGE('',*,*,#196807,.T.); +#196807 = EDGE_CURVE('',#196800,#196808,#196810,.T.); +#196808 = VERTEX_POINT('',#196809); +#196809 = CARTESIAN_POINT('',(210.02665,-75.0731,1.585)); +#196810 = LINE('',#196811,#196812); +#196811 = CARTESIAN_POINT('',(213.61665,-75.0731,1.585)); +#196812 = VECTOR('',#196813,1.); +#196813 = DIRECTION('',(-1.,0.,0.)); +#196814 = ORIENTED_EDGE('',*,*,#196815,.T.); +#196815 = EDGE_CURVE('',#196808,#196816,#196818,.T.); +#196816 = VERTEX_POINT('',#196817); +#196817 = CARTESIAN_POINT('',(210.02665,-75.7131,1.585)); +#196818 = LINE('',#196819,#196820); +#196819 = CARTESIAN_POINT('',(210.02665,-75.0731,1.585)); +#196820 = VECTOR('',#196821,1.); +#196821 = DIRECTION('',(0.,-1.,0.)); +#196822 = ORIENTED_EDGE('',*,*,#196823,.T.); +#196823 = EDGE_CURVE('',#196816,#196824,#196826,.T.); +#196824 = VERTEX_POINT('',#196825); +#196825 = CARTESIAN_POINT('',(212.91665,-75.7131,1.585)); +#196826 = LINE('',#196827,#196828); +#196827 = CARTESIAN_POINT('',(210.02665,-75.7131,1.585)); +#196828 = VECTOR('',#196829,1.); +#196829 = DIRECTION('',(1.,0.,0.)); +#196830 = ORIENTED_EDGE('',*,*,#196831,.T.); +#196831 = EDGE_CURVE('',#196824,#196832,#196834,.T.); +#196832 = VERTEX_POINT('',#196833); +#196833 = CARTESIAN_POINT('',(212.97665,-75.7731,1.585)); +#196834 = CIRCLE('',#196835,5.999932016262E-02); +#196835 = AXIS2_PLACEMENT_3D('',#196836,#196837,#196838); +#196836 = CARTESIAN_POINT('',(212.91665067984,-75.77309932015,1.585)); +#196837 = DIRECTION('',(0.,0.,-1.)); +#196838 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#196839 = ORIENTED_EDGE('',*,*,#196840,.T.); +#196840 = EDGE_CURVE('',#196832,#196841,#196843,.T.); +#196841 = VERTEX_POINT('',#196842); +#196842 = CARTESIAN_POINT('',(212.97665,-81.8731,1.585)); +#196843 = LINE('',#196844,#196845); +#196844 = CARTESIAN_POINT('',(212.97665,-75.7731,1.585)); +#196845 = VECTOR('',#196846,1.); +#196846 = DIRECTION('',(0.,-1.,0.)); +#196847 = ORIENTED_EDGE('',*,*,#196848,.T.); +#196848 = EDGE_CURVE('',#196841,#196849,#196851,.T.); +#196849 = VERTEX_POINT('',#196850); +#196850 = CARTESIAN_POINT('',(212.91665,-81.9331,1.585)); +#196851 = CIRCLE('',#196852,5.999932016262E-02); +#196852 = AXIS2_PLACEMENT_3D('',#196853,#196854,#196855); +#196853 = CARTESIAN_POINT('',(212.91665067984,-81.87310067984,1.585)); +#196854 = DIRECTION('',(0.,0.,-1.)); +#196855 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#196856 = ORIENTED_EDGE('',*,*,#196857,.T.); +#196857 = EDGE_CURVE('',#196849,#196858,#196860,.T.); +#196858 = VERTEX_POINT('',#196859); +#196859 = CARTESIAN_POINT('',(210.02665,-81.9331,1.585)); +#196860 = LINE('',#196861,#196862); +#196861 = CARTESIAN_POINT('',(212.91665,-81.9331,1.585)); +#196862 = VECTOR('',#196863,1.); +#196863 = DIRECTION('',(-1.,0.,0.)); +#196864 = ORIENTED_EDGE('',*,*,#196865,.T.); +#196865 = EDGE_CURVE('',#196858,#196866,#196868,.T.); +#196866 = VERTEX_POINT('',#196867); +#196867 = CARTESIAN_POINT('',(210.02665,-82.5731,1.585)); +#196868 = LINE('',#196869,#196870); +#196869 = CARTESIAN_POINT('',(210.02665,-81.9331,1.585)); +#196870 = VECTOR('',#196871,1.); +#196871 = DIRECTION('',(0.,-1.,0.)); +#196872 = ORIENTED_EDGE('',*,*,#196873,.T.); +#196873 = EDGE_CURVE('',#196866,#196798,#196874,.T.); +#196874 = LINE('',#196875,#196876); +#196875 = CARTESIAN_POINT('',(210.02665,-82.5731,1.585)); +#196876 = VECTOR('',#196877,1.); +#196877 = DIRECTION('',(1.,0.,0.)); +#196878 = FACE_BOUND('',#196879,.F.); +#196879 = EDGE_LOOP('',(#196880,#196890,#196898,#196906)); +#196880 = ORIENTED_EDGE('',*,*,#196881,.T.); +#196881 = EDGE_CURVE('',#196882,#196884,#196886,.T.); +#196882 = VERTEX_POINT('',#196883); +#196883 = CARTESIAN_POINT('',(208.40665,-82.5631,1.585)); +#196884 = VERTEX_POINT('',#196885); +#196885 = CARTESIAN_POINT('',(208.40665,-80.8831,1.585)); +#196886 = LINE('',#196887,#196888); +#196887 = CARTESIAN_POINT('',(208.40665,-82.5631,1.585)); +#196888 = VECTOR('',#196889,1.); +#196889 = DIRECTION('',(0.,1.,0.)); +#196890 = ORIENTED_EDGE('',*,*,#196891,.T.); +#196891 = EDGE_CURVE('',#196884,#196892,#196894,.T.); +#196892 = VERTEX_POINT('',#196893); +#196893 = CARTESIAN_POINT('',(207.77665,-80.8831,1.585)); +#196894 = LINE('',#196895,#196896); +#196895 = CARTESIAN_POINT('',(208.40665,-80.8831,1.585)); +#196896 = VECTOR('',#196897,1.); +#196897 = DIRECTION('',(-1.,0.,0.)); +#196898 = ORIENTED_EDGE('',*,*,#196899,.T.); +#196899 = EDGE_CURVE('',#196892,#196900,#196902,.T.); +#196900 = VERTEX_POINT('',#196901); +#196901 = CARTESIAN_POINT('',(207.77665,-82.5631,1.585)); +#196902 = LINE('',#196903,#196904); +#196903 = CARTESIAN_POINT('',(207.77665,-80.8831,1.585)); +#196904 = VECTOR('',#196905,1.); +#196905 = DIRECTION('',(0.,-1.,0.)); +#196906 = ORIENTED_EDGE('',*,*,#196907,.T.); +#196907 = EDGE_CURVE('',#196900,#196882,#196908,.T.); +#196908 = LINE('',#196909,#196910); +#196909 = CARTESIAN_POINT('',(207.77665,-82.5631,1.585)); +#196910 = VECTOR('',#196911,1.); +#196911 = DIRECTION('',(1.,0.,0.)); +#196912 = FACE_BOUND('',#196913,.F.); +#196913 = EDGE_LOOP('',(#196914,#196924,#196932,#196940)); +#196914 = ORIENTED_EDGE('',*,*,#196915,.T.); +#196915 = EDGE_CURVE('',#196916,#196918,#196920,.T.); +#196916 = VERTEX_POINT('',#196917); +#196917 = CARTESIAN_POINT('',(208.40665,-79.2631,1.585)); +#196918 = VERTEX_POINT('',#196919); +#196919 = CARTESIAN_POINT('',(208.40665,-78.3831,1.585)); +#196920 = LINE('',#196921,#196922); +#196921 = CARTESIAN_POINT('',(208.40665,-79.2631,1.585)); +#196922 = VECTOR('',#196923,1.); +#196923 = DIRECTION('',(0.,1.,0.)); +#196924 = ORIENTED_EDGE('',*,*,#196925,.T.); +#196925 = EDGE_CURVE('',#196918,#196926,#196928,.T.); +#196926 = VERTEX_POINT('',#196927); +#196927 = CARTESIAN_POINT('',(207.77665,-78.3831,1.585)); +#196928 = LINE('',#196929,#196930); +#196929 = CARTESIAN_POINT('',(208.40665,-78.3831,1.585)); +#196930 = VECTOR('',#196931,1.); +#196931 = DIRECTION('',(-1.,0.,0.)); +#196932 = ORIENTED_EDGE('',*,*,#196933,.T.); +#196933 = EDGE_CURVE('',#196926,#196934,#196936,.T.); +#196934 = VERTEX_POINT('',#196935); +#196935 = CARTESIAN_POINT('',(207.77665,-79.2631,1.585)); +#196936 = LINE('',#196937,#196938); +#196937 = CARTESIAN_POINT('',(207.77665,-78.3831,1.585)); +#196938 = VECTOR('',#196939,1.); +#196939 = DIRECTION('',(0.,-1.,0.)); +#196940 = ORIENTED_EDGE('',*,*,#196941,.T.); +#196941 = EDGE_CURVE('',#196934,#196916,#196942,.T.); +#196942 = LINE('',#196943,#196944); +#196943 = CARTESIAN_POINT('',(207.77665,-79.2631,1.585)); +#196944 = VECTOR('',#196945,1.); +#196945 = DIRECTION('',(1.,0.,0.)); +#196946 = FACE_BOUND('',#196947,.F.); +#196947 = EDGE_LOOP('',(#196948,#196958,#196966,#196974)); +#196948 = ORIENTED_EDGE('',*,*,#196949,.T.); +#196949 = EDGE_CURVE('',#196950,#196952,#196954,.T.); +#196950 = VERTEX_POINT('',#196951); +#196951 = CARTESIAN_POINT('',(208.40665,-76.7631,1.585)); +#196952 = VERTEX_POINT('',#196953); +#196953 = CARTESIAN_POINT('',(208.40665,-75.0831,1.585)); +#196954 = LINE('',#196955,#196956); +#196955 = CARTESIAN_POINT('',(208.40665,-76.7631,1.585)); +#196956 = VECTOR('',#196957,1.); +#196957 = DIRECTION('',(0.,1.,0.)); +#196958 = ORIENTED_EDGE('',*,*,#196959,.T.); +#196959 = EDGE_CURVE('',#196952,#196960,#196962,.T.); +#196960 = VERTEX_POINT('',#196961); +#196961 = CARTESIAN_POINT('',(207.77665,-75.0831,1.585)); +#196962 = LINE('',#196963,#196964); +#196963 = CARTESIAN_POINT('',(208.40665,-75.0831,1.585)); +#196964 = VECTOR('',#196965,1.); +#196965 = DIRECTION('',(-1.,0.,0.)); +#196966 = ORIENTED_EDGE('',*,*,#196967,.T.); +#196967 = EDGE_CURVE('',#196960,#196968,#196970,.T.); +#196968 = VERTEX_POINT('',#196969); +#196969 = CARTESIAN_POINT('',(207.77665,-76.7631,1.585)); +#196970 = LINE('',#196971,#196972); +#196971 = CARTESIAN_POINT('',(207.77665,-75.0831,1.585)); +#196972 = VECTOR('',#196973,1.); +#196973 = DIRECTION('',(0.,-1.,0.)); +#196974 = ORIENTED_EDGE('',*,*,#196975,.T.); +#196975 = EDGE_CURVE('',#196968,#196950,#196976,.T.); +#196976 = LINE('',#196977,#196978); +#196977 = CARTESIAN_POINT('',(207.77665,-76.7631,1.585)); +#196978 = VECTOR('',#196979,1.); +#196979 = DIRECTION('',(1.,0.,0.)); +#196980 = PLANE('',#196981); +#196981 = AXIS2_PLACEMENT_3D('',#196982,#196983,#196984); +#196982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196983 = DIRECTION('',(0.,0.,1.)); +#196984 = DIRECTION('',(1.,0.,-0.)); +#196985 = SHELL_BASED_SURFACE_MODEL('',(#196986)); +#196986 = OPEN_SHELL('',(#196987)); +#196987 = ADVANCED_FACE('',(#196988),#197173,.T.); +#196988 = FACE_BOUND('',#196989,.F.); +#196989 = EDGE_LOOP('',(#196990,#197001,#197009,#197018,#197026,#197035, + #197043,#197052,#197060,#197068,#197076,#197085,#197093,#197102, + #197110,#197119,#197127,#197135,#197143,#197151,#197159,#197167)); +#196990 = ORIENTED_EDGE('',*,*,#196991,.T.); +#196991 = EDGE_CURVE('',#196992,#196994,#196996,.T.); +#196992 = VERTEX_POINT('',#196993); +#196993 = CARTESIAN_POINT('',(100.959269,-81.330381,1.585)); +#196994 = VERTEX_POINT('',#196995); +#196995 = CARTESIAN_POINT('',(101.419032,-81.333178,1.585)); +#196996 = CIRCLE('',#196997,0.460785175821); +#196997 = AXIS2_PLACEMENT_3D('',#196998,#196999,#197000); +#196998 = CARTESIAN_POINT('',(101.18672110897,-81.73111597024,1.585)); +#196999 = DIRECTION('',(0.,0.,-1.)); +#197000 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#197001 = ORIENTED_EDGE('',*,*,#197002,.T.); +#197002 = EDGE_CURVE('',#196994,#197003,#197005,.T.); +#197003 = VERTEX_POINT('',#197004); +#197004 = CARTESIAN_POINT('',(101.487343,-81.401489,1.585)); +#197005 = LINE('',#197006,#197007); +#197006 = CARTESIAN_POINT('',(101.419032,-81.333178,1.585)); +#197007 = VECTOR('',#197008,1.); +#197008 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#197009 = ORIENTED_EDGE('',*,*,#197010,.T.); +#197010 = EDGE_CURVE('',#197003,#197011,#197013,.T.); +#197011 = VERTEX_POINT('',#197012); +#197012 = CARTESIAN_POINT('',(101.37195,-81.49619,1.585)); +#197013 = CIRCLE('',#197014,7.500003178656E-02); +#197014 = AXIS2_PLACEMENT_3D('',#197015,#197016,#197017); +#197015 = CARTESIAN_POINT('',(101.42498256212,-81.4431565,1.585)); +#197016 = DIRECTION('',(0.,0.,-1.)); +#197017 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#197018 = ORIENTED_EDGE('',*,*,#197019,.T.); +#197019 = EDGE_CURVE('',#197011,#197020,#197022,.T.); +#197020 = VERTEX_POINT('',#197021); +#197021 = CARTESIAN_POINT('',(101.33685,-81.46109,1.585)); +#197022 = LINE('',#197023,#197024); +#197023 = CARTESIAN_POINT('',(101.37195,-81.49619,1.585)); +#197024 = VECTOR('',#197025,1.); +#197025 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197026 = ORIENTED_EDGE('',*,*,#197027,.T.); +#197027 = EDGE_CURVE('',#197020,#197028,#197030,.T.); +#197028 = VERTEX_POINT('',#197029); +#197029 = CARTESIAN_POINT('',(101.036926,-81.46109,1.585)); +#197030 = CIRCLE('',#197031,0.299308637371); +#197031 = AXIS2_PLACEMENT_3D('',#197032,#197033,#197034); +#197032 = CARTESIAN_POINT('',(101.186888,-81.720121,1.585)); +#197033 = DIRECTION('',(0.,0.,1.)); +#197034 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#197035 = ORIENTED_EDGE('',*,*,#197036,.T.); +#197036 = EDGE_CURVE('',#197028,#197037,#197039,.T.); +#197037 = VERTEX_POINT('',#197038); +#197038 = CARTESIAN_POINT('',(100.962813,-81.535203,1.585)); +#197039 = LINE('',#197040,#197041); +#197040 = CARTESIAN_POINT('',(101.036926,-81.46109,1.585)); +#197041 = VECTOR('',#197042,1.); +#197042 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#197043 = ORIENTED_EDGE('',*,*,#197044,.T.); +#197044 = EDGE_CURVE('',#197037,#197045,#197047,.T.); +#197045 = VERTEX_POINT('',#197046); +#197046 = CARTESIAN_POINT('',(100.880936,-81.910113,1.585)); +#197047 = CIRCLE('',#197048,0.611712714363); +#197048 = AXIS2_PLACEMENT_3D('',#197049,#197050,#197051); +#197049 = CARTESIAN_POINT('',(101.48934127521,-81.8465876822,1.585)); +#197050 = DIRECTION('',(0.,0.,1.)); +#197051 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#197052 = ORIENTED_EDGE('',*,*,#197053,.T.); +#197053 = EDGE_CURVE('',#197045,#197054,#197056,.T.); +#197054 = VERTEX_POINT('',#197055); +#197055 = CARTESIAN_POINT('',(100.924319,-82.083647,1.585)); +#197056 = LINE('',#197057,#197058); +#197057 = CARTESIAN_POINT('',(100.880936,-81.910113,1.585)); +#197058 = VECTOR('',#197059,1.); +#197059 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#197060 = ORIENTED_EDGE('',*,*,#197061,.T.); +#197061 = EDGE_CURVE('',#197054,#197062,#197064,.T.); +#197062 = VERTEX_POINT('',#197063); +#197063 = CARTESIAN_POINT('',(100.962813,-82.160634,1.585)); +#197064 = LINE('',#197065,#197066); +#197065 = CARTESIAN_POINT('',(100.924319,-82.083647,1.585)); +#197066 = VECTOR('',#197067,1.); +#197067 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#197068 = ORIENTED_EDGE('',*,*,#197069,.T.); +#197069 = EDGE_CURVE('',#197062,#197070,#197072,.T.); +#197070 = VERTEX_POINT('',#197071); +#197071 = CARTESIAN_POINT('',(101.036926,-82.234748,1.585)); +#197072 = LINE('',#197073,#197074); +#197073 = CARTESIAN_POINT('',(100.962813,-82.160634,1.585)); +#197074 = VECTOR('',#197075,1.); +#197075 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#197076 = ORIENTED_EDGE('',*,*,#197077,.T.); +#197077 = EDGE_CURVE('',#197070,#197078,#197080,.T.); +#197078 = VERTEX_POINT('',#197079); +#197079 = CARTESIAN_POINT('',(101.33685,-82.234747,1.585)); +#197080 = CIRCLE('',#197081,0.299305962385); +#197081 = AXIS2_PLACEMENT_3D('',#197082,#197083,#197084); +#197082 = CARTESIAN_POINT('',(101.18688713635,-81.97571959093,1.585)); +#197083 = DIRECTION('',(0.,0.,1.)); +#197084 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#197085 = ORIENTED_EDGE('',*,*,#197086,.T.); +#197086 = EDGE_CURVE('',#197078,#197087,#197089,.T.); +#197087 = VERTEX_POINT('',#197088); +#197088 = CARTESIAN_POINT('',(101.383315,-82.19032,1.585)); +#197089 = LINE('',#197090,#197091); +#197090 = CARTESIAN_POINT('',(101.33685,-82.234747,1.585)); +#197091 = VECTOR('',#197092,1.); +#197092 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#197093 = ORIENTED_EDGE('',*,*,#197094,.T.); +#197094 = EDGE_CURVE('',#197087,#197095,#197097,.T.); +#197095 = VERTEX_POINT('',#197096); +#197096 = CARTESIAN_POINT('',(101.478016,-82.305713,1.585)); +#197097 = CIRCLE('',#197098,7.499993690111E-02); +#197098 = AXIS2_PLACEMENT_3D('',#197099,#197100,#197101); +#197099 = CARTESIAN_POINT('',(101.4249832483,-82.25267982374,1.585)); +#197100 = DIRECTION('',(0.,0.,-1.)); +#197101 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#197102 = ORIENTED_EDGE('',*,*,#197103,.T.); +#197103 = EDGE_CURVE('',#197095,#197104,#197106,.T.); +#197104 = VERTEX_POINT('',#197105); +#197105 = CARTESIAN_POINT('',(101.414506,-82.365457,1.585)); +#197106 = LINE('',#197107,#197108); +#197107 = CARTESIAN_POINT('',(101.478016,-82.305713,1.585)); +#197108 = VECTOR('',#197109,1.); +#197109 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#197110 = ORIENTED_EDGE('',*,*,#197111,.T.); +#197111 = EDGE_CURVE('',#197104,#197112,#197114,.T.); +#197112 = VERTEX_POINT('',#197113); +#197113 = CARTESIAN_POINT('',(100.954744,-82.362661,1.585)); +#197114 = CIRCLE('',#197115,0.461067828848); +#197115 = AXIS2_PLACEMENT_3D('',#197116,#197117,#197118); +#197116 = CARTESIAN_POINT('',(101.18705551268,-81.96439613352,1.585)); +#197117 = DIRECTION('',(-0.,0.,-1.)); +#197118 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#197119 = ORIENTED_EDGE('',*,*,#197120,.T.); +#197120 = EDGE_CURVE('',#197112,#197121,#197123,.T.); +#197121 = VERTEX_POINT('',#197122); +#197122 = CARTESIAN_POINT('',(100.838055,-82.244898,1.585)); +#197123 = LINE('',#197124,#197125); +#197124 = CARTESIAN_POINT('',(100.954744,-82.362661,1.585)); +#197125 = VECTOR('',#197126,1.); +#197126 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#197127 = ORIENTED_EDGE('',*,*,#197128,.T.); +#197128 = EDGE_CURVE('',#197121,#197129,#197131,.T.); +#197129 = VERTEX_POINT('',#197130); +#197130 = CARTESIAN_POINT('',(100.780794,-82.128013,1.585)); +#197131 = LINE('',#197132,#197133); +#197132 = CARTESIAN_POINT('',(100.838055,-82.244898,1.585)); +#197133 = VECTOR('',#197134,1.); +#197134 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#197135 = ORIENTED_EDGE('',*,*,#197136,.T.); +#197136 = EDGE_CURVE('',#197129,#197137,#197139,.T.); +#197137 = VERTEX_POINT('',#197138); +#197138 = CARTESIAN_POINT('',(100.730936,-81.919347,1.585)); +#197139 = LINE('',#197140,#197141); +#197140 = CARTESIAN_POINT('',(100.780794,-82.128013,1.585)); +#197141 = VECTOR('',#197142,1.); +#197142 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#197143 = ORIENTED_EDGE('',*,*,#197144,.T.); +#197144 = EDGE_CURVE('',#197137,#197145,#197147,.T.); +#197145 = VERTEX_POINT('',#197146); +#197146 = CARTESIAN_POINT('',(100.733175,-81.7583,1.585)); +#197147 = LINE('',#197148,#197149); +#197148 = CARTESIAN_POINT('',(100.730936,-81.919347,1.585)); +#197149 = VECTOR('',#197150,1.); +#197150 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#197151 = ORIENTED_EDGE('',*,*,#197152,.T.); +#197152 = EDGE_CURVE('',#197145,#197153,#197155,.T.); +#197153 = VERTEX_POINT('',#197154); +#197154 = CARTESIAN_POINT('',(100.786473,-81.552473,1.585)); +#197155 = LINE('',#197156,#197157); +#197156 = CARTESIAN_POINT('',(100.733175,-81.7583,1.585)); +#197157 = VECTOR('',#197158,1.); +#197158 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#197159 = ORIENTED_EDGE('',*,*,#197160,.T.); +#197160 = EDGE_CURVE('',#197153,#197161,#197163,.T.); +#197161 = VERTEX_POINT('',#197162); +#197162 = CARTESIAN_POINT('',(100.843422,-81.443492,1.585)); +#197163 = LINE('',#197164,#197165); +#197164 = CARTESIAN_POINT('',(100.786473,-81.552473,1.585)); +#197165 = VECTOR('',#197166,1.); +#197166 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#197167 = ORIENTED_EDGE('',*,*,#197168,.T.); +#197168 = EDGE_CURVE('',#197161,#196992,#197169,.T.); +#197169 = LINE('',#197170,#197171); +#197170 = CARTESIAN_POINT('',(100.843422,-81.443492,1.585)); +#197171 = VECTOR('',#197172,1.); +#197172 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#197173 = PLANE('',#197174); +#197174 = AXIS2_PLACEMENT_3D('',#197175,#197176,#197177); +#197175 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197176 = DIRECTION('',(0.,0.,1.)); +#197177 = DIRECTION('',(1.,0.,-0.)); +#197178 = SHELL_BASED_SURFACE_MODEL('',(#197179)); +#197179 = OPEN_SHELL('',(#197180)); +#197180 = ADVANCED_FACE('',(#197181,#197339),#197409,.T.); +#197181 = FACE_BOUND('',#197182,.F.); +#197182 = EDGE_LOOP('',(#197183,#197194,#197202,#197210,#197218,#197227, + #197235,#197243,#197252,#197260,#197268,#197276,#197284,#197292, + #197300,#197308,#197317,#197325,#197333)); +#197183 = ORIENTED_EDGE('',*,*,#197184,.T.); +#197184 = EDGE_CURVE('',#197185,#197187,#197189,.T.); +#197185 = VERTEX_POINT('',#197186); +#197186 = CARTESIAN_POINT('',(101.861333,-81.33242,1.585)); +#197187 = VERTEX_POINT('',#197188); +#197188 = CARTESIAN_POINT('',(102.329409,-81.337786,1.585)); +#197189 = CIRCLE('',#197190,0.397581403297); +#197190 = AXIS2_PLACEMENT_3D('',#197191,#197192,#197193); +#197191 = CARTESIAN_POINT('',(102.09168687062,-81.65646948161,1.585)); +#197192 = DIRECTION('',(0.,0.,-1.)); +#197193 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#197194 = ORIENTED_EDGE('',*,*,#197195,.T.); +#197195 = EDGE_CURVE('',#197187,#197196,#197198,.T.); +#197196 = VERTEX_POINT('',#197197); +#197197 = CARTESIAN_POINT('',(102.392862,-81.403316,1.585)); +#197198 = LINE('',#197199,#197200); +#197199 = CARTESIAN_POINT('',(102.329409,-81.337786,1.585)); +#197200 = VECTOR('',#197201,1.); +#197201 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#197202 = ORIENTED_EDGE('',*,*,#197203,.T.); +#197203 = EDGE_CURVE('',#197196,#197204,#197206,.T.); +#197204 = VERTEX_POINT('',#197205); +#197205 = CARTESIAN_POINT('',(102.450923,-81.523763,1.585)); +#197206 = LINE('',#197207,#197208); +#197207 = CARTESIAN_POINT('',(102.392862,-81.403316,1.585)); +#197208 = VECTOR('',#197209,1.); +#197209 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#197210 = ORIENTED_EDGE('',*,*,#197211,.T.); +#197211 = EDGE_CURVE('',#197204,#197212,#197214,.T.); +#197212 = VERTEX_POINT('',#197213); +#197213 = CARTESIAN_POINT('',(102.450125,-81.937537,1.585)); +#197214 = LINE('',#197215,#197216); +#197215 = CARTESIAN_POINT('',(102.450923,-81.523763,1.585)); +#197216 = VECTOR('',#197217,1.); +#197217 = DIRECTION('',(-1.928585449894E-03,-0.999998140277,0.)); +#197218 = ORIENTED_EDGE('',*,*,#197219,.T.); +#197219 = EDGE_CURVE('',#197212,#197220,#197222,.T.); +#197220 = VERTEX_POINT('',#197221); +#197221 = CARTESIAN_POINT('',(102.220429,-82.367382,1.585)); +#197222 = CIRCLE('',#197223,0.610117599579); +#197223 = AXIS2_PLACEMENT_3D('',#197224,#197225,#197226); +#197224 = CARTESIAN_POINT('',(101.8419536885,-81.88884263494,1.585)); +#197225 = DIRECTION('',(0.,0.,-1.)); +#197226 = DIRECTION('',(0.996809978793,-7.981144140804E-02,0.)); +#197227 = ORIENTED_EDGE('',*,*,#197228,.T.); +#197228 = EDGE_CURVE('',#197220,#197229,#197231,.T.); +#197229 = VERTEX_POINT('',#197230); +#197230 = CARTESIAN_POINT('',(102.106282,-82.421478,1.585)); +#197231 = LINE('',#197232,#197233); +#197232 = CARTESIAN_POINT('',(102.220429,-82.367382,1.585)); +#197233 = VECTOR('',#197234,1.); +#197234 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#197235 = ORIENTED_EDGE('',*,*,#197236,.T.); +#197236 = EDGE_CURVE('',#197229,#197237,#197239,.T.); +#197237 = VERTEX_POINT('',#197238); +#197238 = CARTESIAN_POINT('',(101.886542,-82.421478,1.585)); +#197239 = LINE('',#197240,#197241); +#197240 = CARTESIAN_POINT('',(102.106282,-82.421478,1.585)); +#197241 = VECTOR('',#197242,1.); +#197242 = DIRECTION('',(-1.,0.,0.)); +#197243 = ORIENTED_EDGE('',*,*,#197244,.T.); +#197244 = EDGE_CURVE('',#197237,#197245,#197247,.T.); +#197245 = VERTEX_POINT('',#197246); +#197246 = CARTESIAN_POINT('',(101.901174,-82.272919,1.585)); +#197247 = CIRCLE('',#197248,7.500006711463E-02); +#197248 = AXIS2_PLACEMENT_3D('',#197249,#197250,#197251); +#197249 = CARTESIAN_POINT('',(101.90117393288,-82.34791906711,1.585)); +#197250 = DIRECTION('',(0.,0.,-1.)); +#197251 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#197252 = ORIENTED_EDGE('',*,*,#197253,.T.); +#197253 = EDGE_CURVE('',#197245,#197254,#197256,.T.); +#197254 = VERTEX_POINT('',#197255); +#197255 = CARTESIAN_POINT('',(102.073945,-82.272919,1.585)); +#197256 = LINE('',#197257,#197258); +#197257 = CARTESIAN_POINT('',(101.901174,-82.272919,1.585)); +#197258 = VECTOR('',#197259,1.); +#197259 = DIRECTION('',(1.,0.,0.)); +#197260 = ORIENTED_EDGE('',*,*,#197261,.T.); +#197261 = EDGE_CURVE('',#197254,#197262,#197264,.T.); +#197262 = VERTEX_POINT('',#197263); +#197263 = CARTESIAN_POINT('',(102.14246,-82.238661,1.585)); +#197264 = LINE('',#197265,#197266); +#197265 = CARTESIAN_POINT('',(102.073945,-82.272919,1.585)); +#197266 = VECTOR('',#197267,1.); +#197267 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#197268 = ORIENTED_EDGE('',*,*,#197269,.T.); +#197269 = EDGE_CURVE('',#197262,#197270,#197272,.T.); +#197270 = VERTEX_POINT('',#197271); +#197271 = CARTESIAN_POINT('',(102.17622,-82.2049,1.585)); +#197272 = LINE('',#197273,#197274); +#197273 = CARTESIAN_POINT('',(102.14246,-82.238661,1.585)); +#197274 = VECTOR('',#197275,1.); +#197275 = DIRECTION('',(0.707096308711,0.707117253507,0.)); +#197276 = ORIENTED_EDGE('',*,*,#197277,.T.); +#197277 = EDGE_CURVE('',#197270,#197278,#197280,.T.); +#197278 = VERTEX_POINT('',#197279); +#197279 = CARTESIAN_POINT('',(102.260135,-82.079029,1.585)); +#197280 = LINE('',#197281,#197282); +#197281 = CARTESIAN_POINT('',(102.17622,-82.2049,1.585)); +#197282 = VECTOR('',#197283,1.); +#197283 = DIRECTION('',(0.55470477259,0.83204724341,0.)); +#197284 = ORIENTED_EDGE('',*,*,#197285,.T.); +#197285 = EDGE_CURVE('',#197278,#197286,#197288,.T.); +#197286 = VERTEX_POINT('',#197287); +#197287 = CARTESIAN_POINT('',(102.278659,-82.004933,1.585)); +#197288 = LINE('',#197289,#197290); +#197289 = CARTESIAN_POINT('',(102.260135,-82.079029,1.585)); +#197290 = VECTOR('',#197291,1.); +#197291 = DIRECTION('',(0.242535625036,0.970142500145,0.)); +#197292 = ORIENTED_EDGE('',*,*,#197293,.T.); +#197293 = EDGE_CURVE('',#197286,#197294,#197296,.T.); +#197294 = VERTEX_POINT('',#197295); +#197295 = CARTESIAN_POINT('',(102.20152,-82.040525,1.585)); +#197296 = LINE('',#197297,#197298); +#197297 = CARTESIAN_POINT('',(102.278659,-82.004933,1.585)); +#197298 = VECTOR('',#197299,1.); +#197299 = DIRECTION('',(-0.90800692221,-0.418955163734,0.)); +#197300 = ORIENTED_EDGE('',*,*,#197301,.T.); +#197301 = EDGE_CURVE('',#197294,#197302,#197304,.T.); +#197302 = VERTEX_POINT('',#197303); +#197303 = CARTESIAN_POINT('',(101.976602,-82.039303,1.585)); +#197304 = LINE('',#197305,#197306); +#197305 = CARTESIAN_POINT('',(102.20152,-82.040525,1.585)); +#197306 = VECTOR('',#197307,1.); +#197307 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#197308 = ORIENTED_EDGE('',*,*,#197309,.T.); +#197309 = EDGE_CURVE('',#197302,#197310,#197312,.T.); +#197310 = VERTEX_POINT('',#197311); +#197311 = CARTESIAN_POINT('',(101.732377,-81.791122,1.585)); +#197312 = CIRCLE('',#197313,0.348628078749); +#197313 = AXIS2_PLACEMENT_3D('',#197314,#197315,#197316); +#197314 = CARTESIAN_POINT('',(102.0697770302,-81.70335664857,1.585)); +#197315 = DIRECTION('',(0.,0.,-1.)); +#197316 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#197317 = ORIENTED_EDGE('',*,*,#197318,.T.); +#197318 = EDGE_CURVE('',#197310,#197319,#197321,.T.); +#197319 = VERTEX_POINT('',#197320); +#197320 = CARTESIAN_POINT('',(101.733599,-81.518586,1.585)); +#197321 = LINE('',#197322,#197323); +#197322 = CARTESIAN_POINT('',(101.732377,-81.791122,1.585)); +#197323 = VECTOR('',#197324,1.); +#197324 = DIRECTION('',(4.483766241139E-03,0.99998994787,0.)); +#197325 = ORIENTED_EDGE('',*,*,#197326,.T.); +#197326 = EDGE_CURVE('',#197319,#197327,#197329,.T.); +#197327 = VERTEX_POINT('',#197328); +#197328 = CARTESIAN_POINT('',(101.795803,-81.395873,1.585)); +#197329 = LINE('',#197330,#197331); +#197330 = CARTESIAN_POINT('',(101.733599,-81.518586,1.585)); +#197331 = VECTOR('',#197332,1.); +#197332 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#197333 = ORIENTED_EDGE('',*,*,#197334,.T.); +#197334 = EDGE_CURVE('',#197327,#197185,#197335,.T.); +#197335 = LINE('',#197336,#197337); +#197336 = CARTESIAN_POINT('',(101.795803,-81.395873,1.585)); +#197337 = VECTOR('',#197338,1.); +#197338 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#197339 = FACE_BOUND('',#197340,.F.); +#197340 = EDGE_LOOP('',(#197341,#197352,#197360,#197369,#197377,#197386, + #197394,#197403)); +#197341 = ORIENTED_EDGE('',*,*,#197342,.T.); +#197342 = EDGE_CURVE('',#197343,#197345,#197347,.T.); +#197343 = VERTEX_POINT('',#197344); +#197344 = CARTESIAN_POINT('',(102.237699,-81.457177,1.585)); +#197345 = VERTEX_POINT('',#197346); +#197346 = CARTESIAN_POINT('',(101.945601,-81.457177,1.585)); +#197347 = CIRCLE('',#197348,0.252889603602); +#197348 = AXIS2_PLACEMENT_3D('',#197349,#197350,#197351); +#197349 = CARTESIAN_POINT('',(102.09165,-81.66363,1.585)); +#197350 = DIRECTION('',(0.,0.,1.)); +#197351 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#197352 = ORIENTED_EDGE('',*,*,#197353,.T.); +#197353 = EDGE_CURVE('',#197345,#197354,#197356,.T.); +#197354 = VERTEX_POINT('',#197355); +#197355 = CARTESIAN_POINT('',(101.915194,-81.487584,1.585)); +#197356 = LINE('',#197357,#197358); +#197357 = CARTESIAN_POINT('',(101.945601,-81.457177,1.585)); +#197358 = VECTOR('',#197359,1.); +#197359 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#197360 = ORIENTED_EDGE('',*,*,#197361,.T.); +#197361 = EDGE_CURVE('',#197354,#197362,#197364,.T.); +#197362 = VERTEX_POINT('',#197363); +#197363 = CARTESIAN_POINT('',(101.915194,-81.827301,1.585)); +#197364 = CIRCLE('',#197365,0.305621483548); +#197365 = AXIS2_PLACEMENT_3D('',#197366,#197367,#197368); +#197366 = CARTESIAN_POINT('',(102.169266,-81.6574425,1.585)); +#197367 = DIRECTION('',(0.,0.,1.)); +#197368 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#197369 = ORIENTED_EDGE('',*,*,#197370,.T.); +#197370 = EDGE_CURVE('',#197362,#197371,#197373,.T.); +#197371 = VERTEX_POINT('',#197372); +#197372 = CARTESIAN_POINT('',(101.945601,-81.857708,1.585)); +#197373 = LINE('',#197374,#197375); +#197374 = CARTESIAN_POINT('',(101.915194,-81.827301,1.585)); +#197375 = VECTOR('',#197376,1.); +#197376 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#197377 = ORIENTED_EDGE('',*,*,#197378,.T.); +#197378 = EDGE_CURVE('',#197371,#197379,#197381,.T.); +#197379 = VERTEX_POINT('',#197380); +#197380 = CARTESIAN_POINT('',(102.237699,-81.857708,1.585)); +#197381 = CIRCLE('',#197382,0.252889603602); +#197382 = AXIS2_PLACEMENT_3D('',#197383,#197384,#197385); +#197383 = CARTESIAN_POINT('',(102.09165,-81.651255,1.585)); +#197384 = DIRECTION('',(0.,0.,1.)); +#197385 = DIRECTION('',(-0.577520775547,-0.816375988018,0.)); +#197386 = ORIENTED_EDGE('',*,*,#197387,.T.); +#197387 = EDGE_CURVE('',#197379,#197388,#197390,.T.); +#197388 = VERTEX_POINT('',#197389); +#197389 = CARTESIAN_POINT('',(102.268106,-81.827301,1.585)); +#197390 = LINE('',#197391,#197392); +#197391 = CARTESIAN_POINT('',(102.237699,-81.857708,1.585)); +#197392 = VECTOR('',#197393,1.); +#197393 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#197394 = ORIENTED_EDGE('',*,*,#197395,.T.); +#197395 = EDGE_CURVE('',#197388,#197396,#197398,.T.); +#197396 = VERTEX_POINT('',#197397); +#197397 = CARTESIAN_POINT('',(102.268106,-81.487584,1.585)); +#197398 = CIRCLE('',#197399,0.305621483548); +#197399 = AXIS2_PLACEMENT_3D('',#197400,#197401,#197402); +#197400 = CARTESIAN_POINT('',(102.014034,-81.6574425,1.585)); +#197401 = DIRECTION('',(0.,-0.,1.)); +#197402 = DIRECTION('',(0.831328992485,-0.555780627814,-0.)); +#197403 = ORIENTED_EDGE('',*,*,#197404,.T.); +#197404 = EDGE_CURVE('',#197396,#197343,#197405,.T.); +#197405 = LINE('',#197406,#197407); +#197406 = CARTESIAN_POINT('',(102.268106,-81.487584,1.585)); +#197407 = VECTOR('',#197408,1.); +#197408 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197409 = PLANE('',#197410); +#197410 = AXIS2_PLACEMENT_3D('',#197411,#197412,#197413); +#197411 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197412 = DIRECTION('',(0.,0.,1.)); +#197413 = DIRECTION('',(1.,0.,-0.)); +#197414 = SHELL_BASED_SURFACE_MODEL('',(#197415)); +#197415 = OPEN_SHELL('',(#197416)); +#197416 = ADVANCED_FACE('',(#197417,#197533),#197616,.T.); +#197417 = FACE_BOUND('',#197418,.F.); +#197418 = EDGE_LOOP('',(#197419,#197430,#197438,#197446,#197454,#197462, + #197470,#197478,#197486,#197494,#197502,#197510,#197518,#197527)); +#197419 = ORIENTED_EDGE('',*,*,#197420,.T.); +#197420 = EDGE_CURVE('',#197421,#197423,#197425,.T.); +#197421 = VERTEX_POINT('',#197422); +#197422 = CARTESIAN_POINT('',(94.379996,-80.763287,1.585)); +#197423 = VERTEX_POINT('',#197424); +#197424 = CARTESIAN_POINT('',(94.453555,-80.702919,1.585)); +#197425 = CIRCLE('',#197426,7.500074938981E-02); +#197426 = AXIS2_PLACEMENT_3D('',#197427,#197428,#197429); +#197427 = CARTESIAN_POINT('',(94.45355546611,-80.77791974938,1.585)); +#197428 = DIRECTION('',(0.,0.,-1.)); +#197429 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#197430 = ORIENTED_EDGE('',*,*,#197431,.T.); +#197431 = EDGE_CURVE('',#197423,#197432,#197434,.T.); +#197432 = VERTEX_POINT('',#197433); +#197433 = CARTESIAN_POINT('',(94.699055,-80.703648,1.585)); +#197434 = LINE('',#197435,#197436); +#197435 = CARTESIAN_POINT('',(94.453555,-80.702919,1.585)); +#197436 = VECTOR('',#197437,1.); +#197437 = DIRECTION('',(0.999995591212,-2.969437010185E-03,0.)); +#197438 = ORIENTED_EDGE('',*,*,#197439,.T.); +#197439 = EDGE_CURVE('',#197432,#197440,#197442,.T.); +#197440 = VERTEX_POINT('',#197441); +#197441 = CARTESIAN_POINT('',(94.876175,-80.763178,1.585)); +#197442 = LINE('',#197443,#197444); +#197443 = CARTESIAN_POINT('',(94.699055,-80.703648,1.585)); +#197444 = VECTOR('',#197445,1.); +#197445 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#197446 = ORIENTED_EDGE('',*,*,#197447,.T.); +#197447 = EDGE_CURVE('',#197440,#197448,#197450,.T.); +#197448 = VERTEX_POINT('',#197449); +#197449 = CARTESIAN_POINT('',(94.992864,-80.88094,1.585)); +#197450 = LINE('',#197451,#197452); +#197451 = CARTESIAN_POINT('',(94.876175,-80.763178,1.585)); +#197452 = VECTOR('',#197453,1.); +#197453 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#197454 = ORIENTED_EDGE('',*,*,#197455,.T.); +#197455 = EDGE_CURVE('',#197448,#197456,#197458,.T.); +#197456 = VERTEX_POINT('',#197457); +#197457 = CARTESIAN_POINT('',(95.050125,-80.997824,1.585)); +#197458 = LINE('',#197459,#197460); +#197459 = CARTESIAN_POINT('',(94.992864,-80.88094,1.585)); +#197460 = VECTOR('',#197461,1.); +#197461 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#197462 = ORIENTED_EDGE('',*,*,#197463,.T.); +#197463 = EDGE_CURVE('',#197456,#197464,#197466,.T.); +#197464 = VERTEX_POINT('',#197465); +#197465 = CARTESIAN_POINT('',(95.099983,-81.20649,1.585)); +#197466 = LINE('',#197467,#197468); +#197467 = CARTESIAN_POINT('',(95.050125,-80.997824,1.585)); +#197468 = VECTOR('',#197469,1.); +#197469 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#197470 = ORIENTED_EDGE('',*,*,#197471,.T.); +#197471 = EDGE_CURVE('',#197464,#197472,#197474,.T.); +#197472 = VERTEX_POINT('',#197473); +#197473 = CARTESIAN_POINT('',(95.097744,-81.367537,1.585)); +#197474 = LINE('',#197475,#197476); +#197475 = CARTESIAN_POINT('',(95.099983,-81.20649,1.585)); +#197476 = VECTOR('',#197477,1.); +#197477 = DIRECTION('',(-1.390143030559E-02,-0.999903370449,0.)); +#197478 = ORIENTED_EDGE('',*,*,#197479,.T.); +#197479 = EDGE_CURVE('',#197472,#197480,#197482,.T.); +#197480 = VERTEX_POINT('',#197481); +#197481 = CARTESIAN_POINT('',(95.044446,-81.573364,1.585)); +#197482 = LINE('',#197483,#197484); +#197483 = CARTESIAN_POINT('',(95.097744,-81.367537,1.585)); +#197484 = VECTOR('',#197485,1.); +#197485 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#197486 = ORIENTED_EDGE('',*,*,#197487,.T.); +#197487 = EDGE_CURVE('',#197480,#197488,#197490,.T.); +#197488 = VERTEX_POINT('',#197489); +#197489 = CARTESIAN_POINT('',(94.987496,-81.682344,1.585)); +#197490 = LINE('',#197491,#197492); +#197491 = CARTESIAN_POINT('',(95.044446,-81.573364,1.585)); +#197492 = VECTOR('',#197493,1.); +#197493 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#197494 = ORIENTED_EDGE('',*,*,#197495,.T.); +#197495 = EDGE_CURVE('',#197488,#197496,#197498,.T.); +#197496 = VERTEX_POINT('',#197497); +#197497 = CARTESIAN_POINT('',(94.871649,-81.795457,1.585)); +#197498 = LINE('',#197499,#197500); +#197499 = CARTESIAN_POINT('',(94.987496,-81.682344,1.585)); +#197500 = VECTOR('',#197501,1.); +#197501 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#197502 = ORIENTED_EDGE('',*,*,#197503,.T.); +#197503 = EDGE_CURVE('',#197496,#197504,#197506,.T.); +#197504 = VERTEX_POINT('',#197505); +#197505 = CARTESIAN_POINT('',(94.699055,-81.852189,1.585)); +#197506 = LINE('',#197507,#197508); +#197507 = CARTESIAN_POINT('',(94.871649,-81.795457,1.585)); +#197508 = VECTOR('',#197509,1.); +#197509 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#197510 = ORIENTED_EDGE('',*,*,#197511,.T.); +#197511 = EDGE_CURVE('',#197504,#197512,#197514,.T.); +#197512 = VERTEX_POINT('',#197513); +#197513 = CARTESIAN_POINT('',(94.438923,-81.851478,1.585)); +#197514 = LINE('',#197515,#197516); +#197515 = CARTESIAN_POINT('',(94.699055,-81.852189,1.585)); +#197516 = VECTOR('',#197517,1.); +#197517 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#197518 = ORIENTED_EDGE('',*,*,#197519,.T.); +#197519 = EDGE_CURVE('',#197512,#197520,#197522,.T.); +#197520 = VERTEX_POINT('',#197521); +#197521 = CARTESIAN_POINT('',(94.378555,-81.777919,1.585)); +#197522 = CIRCLE('',#197523,7.500074938984E-02); +#197523 = AXIS2_PLACEMENT_3D('',#197524,#197525,#197526); +#197524 = CARTESIAN_POINT('',(94.453555749388,-81.77791853389,1.585)); +#197525 = DIRECTION('',(0.,0.,-1.)); +#197526 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#197527 = ORIENTED_EDGE('',*,*,#197528,.T.); +#197528 = EDGE_CURVE('',#197520,#197421,#197529,.T.); +#197529 = LINE('',#197530,#197531); +#197530 = CARTESIAN_POINT('',(94.378555,-81.777919,1.585)); +#197531 = VECTOR('',#197532,1.); +#197532 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#197533 = FACE_BOUND('',#197534,.F.); +#197534 = EDGE_LOOP('',(#197535,#197545,#197553,#197561,#197569,#197577, + #197585,#197594,#197602,#197610)); +#197535 = ORIENTED_EDGE('',*,*,#197536,.T.); +#197536 = EDGE_CURVE('',#197537,#197539,#197541,.T.); +#197537 = VERTEX_POINT('',#197538); +#197538 = CARTESIAN_POINT('',(94.793993,-80.89109,1.585)); +#197539 = VERTEX_POINT('',#197540); +#197540 = CARTESIAN_POINT('',(94.67948,-80.852919,1.585)); +#197541 = LINE('',#197542,#197543); +#197542 = CARTESIAN_POINT('',(94.793993,-80.89109,1.585)); +#197543 = VECTOR('',#197544,1.); +#197544 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#197545 = ORIENTED_EDGE('',*,*,#197546,.T.); +#197546 = EDGE_CURVE('',#197539,#197547,#197549,.T.); +#197547 = VERTEX_POINT('',#197548); +#197548 = CARTESIAN_POINT('',(94.528555,-80.852919,1.585)); +#197549 = LINE('',#197550,#197551); +#197550 = CARTESIAN_POINT('',(94.67948,-80.852919,1.585)); +#197551 = VECTOR('',#197552,1.); +#197552 = DIRECTION('',(-1.,0.,0.)); +#197553 = ORIENTED_EDGE('',*,*,#197554,.T.); +#197554 = EDGE_CURVE('',#197547,#197555,#197557,.T.); +#197555 = VERTEX_POINT('',#197556); +#197556 = CARTESIAN_POINT('',(94.528555,-81.702919,1.585)); +#197557 = LINE('',#197558,#197559); +#197558 = CARTESIAN_POINT('',(94.528555,-80.852919,1.585)); +#197559 = VECTOR('',#197560,1.); +#197560 = DIRECTION('',(0.,-1.,0.)); +#197561 = ORIENTED_EDGE('',*,*,#197562,.T.); +#197562 = EDGE_CURVE('',#197555,#197563,#197565,.T.); +#197563 = VERTEX_POINT('',#197564); +#197564 = CARTESIAN_POINT('',(94.67948,-81.702919,1.585)); +#197565 = LINE('',#197566,#197567); +#197566 = CARTESIAN_POINT('',(94.528555,-81.702919,1.585)); +#197567 = VECTOR('',#197568,1.); +#197568 = DIRECTION('',(1.,0.,0.)); +#197569 = ORIENTED_EDGE('',*,*,#197570,.T.); +#197570 = EDGE_CURVE('',#197563,#197571,#197573,.T.); +#197571 = VERTEX_POINT('',#197572); +#197572 = CARTESIAN_POINT('',(94.793993,-81.664747,1.585)); +#197573 = LINE('',#197574,#197575); +#197574 = CARTESIAN_POINT('',(94.67948,-81.702919,1.585)); +#197575 = VECTOR('',#197576,1.); +#197576 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#197577 = ORIENTED_EDGE('',*,*,#197578,.T.); +#197578 = EDGE_CURVE('',#197571,#197579,#197581,.T.); +#197579 = VERTEX_POINT('',#197580); +#197580 = CARTESIAN_POINT('',(94.868105,-81.590634,1.585)); +#197581 = LINE('',#197582,#197583); +#197582 = CARTESIAN_POINT('',(94.793993,-81.664747,1.585)); +#197583 = VECTOR('',#197584,1.); +#197584 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#197585 = ORIENTED_EDGE('',*,*,#197586,.T.); +#197586 = EDGE_CURVE('',#197579,#197587,#197589,.T.); +#197587 = VERTEX_POINT('',#197588); +#197588 = CARTESIAN_POINT('',(94.949983,-81.215724,1.585)); +#197589 = CIRCLE('',#197590,0.611719141131); +#197590 = AXIS2_PLACEMENT_3D('',#197591,#197592,#197593); +#197591 = CARTESIAN_POINT('',(94.341570962243,-81.27924643649,1.585)); +#197592 = DIRECTION('',(0.,0.,1.)); +#197593 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#197594 = ORIENTED_EDGE('',*,*,#197595,.T.); +#197595 = EDGE_CURVE('',#197587,#197596,#197598,.T.); +#197596 = VERTEX_POINT('',#197597); +#197597 = CARTESIAN_POINT('',(94.906599,-81.04219,1.585)); +#197598 = LINE('',#197599,#197600); +#197599 = CARTESIAN_POINT('',(94.949983,-81.215724,1.585)); +#197600 = VECTOR('',#197601,1.); +#197601 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#197602 = ORIENTED_EDGE('',*,*,#197603,.T.); +#197603 = EDGE_CURVE('',#197596,#197604,#197606,.T.); +#197604 = VERTEX_POINT('',#197605); +#197605 = CARTESIAN_POINT('',(94.868106,-80.965203,1.585)); +#197606 = LINE('',#197607,#197608); +#197607 = CARTESIAN_POINT('',(94.906599,-81.04219,1.585)); +#197608 = VECTOR('',#197609,1.); +#197609 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#197610 = ORIENTED_EDGE('',*,*,#197611,.T.); +#197611 = EDGE_CURVE('',#197604,#197537,#197612,.T.); +#197612 = LINE('',#197613,#197614); +#197613 = CARTESIAN_POINT('',(94.868106,-80.965203,1.585)); +#197614 = VECTOR('',#197615,1.); +#197615 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197616 = PLANE('',#197617); +#197617 = AXIS2_PLACEMENT_3D('',#197618,#197619,#197620); +#197618 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197619 = DIRECTION('',(0.,0.,1.)); +#197620 = DIRECTION('',(1.,0.,-0.)); +#197621 = SHELL_BASED_SURFACE_MODEL('',(#197622)); +#197622 = OPEN_SHELL('',(#197623)); +#197623 = ADVANCED_FACE('',(#197624),#197819,.T.); +#197624 = FACE_BOUND('',#197625,.F.); +#197625 = EDGE_LOOP('',(#197626,#197637,#197645,#197654,#197662,#197670, + #197678,#197686,#197695,#197703,#197712,#197720,#197728,#197736, + #197745,#197753,#197762,#197770,#197779,#197787,#197796,#197804, + #197813)); +#197626 = ORIENTED_EDGE('',*,*,#197627,.T.); +#197627 = EDGE_CURVE('',#197628,#197630,#197632,.T.); +#197628 = VERTEX_POINT('',#197629); +#197629 = CARTESIAN_POINT('',(95.381817,-80.75604,1.585)); +#197630 = VERTEX_POINT('',#197631); +#197631 = CARTESIAN_POINT('',(95.453555,-80.702919,1.585)); +#197632 = CIRCLE('',#197633,7.500336100772E-02); +#197633 = AXIS2_PLACEMENT_3D('',#197634,#197635,#197636); +#197634 = CARTESIAN_POINT('',(95.453557270704,-80.77792236097,1.585)); +#197635 = DIRECTION('',(0.,0.,-1.)); +#197636 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#197637 = ORIENTED_EDGE('',*,*,#197638,.T.); +#197638 = EDGE_CURVE('',#197630,#197639,#197641,.T.); +#197639 = VERTEX_POINT('',#197640); +#197640 = CARTESIAN_POINT('',(95.944377,-80.70436,1.585)); +#197641 = LINE('',#197642,#197643); +#197642 = CARTESIAN_POINT('',(95.453555,-80.702919,1.585)); +#197643 = VECTOR('',#197644,1.); +#197644 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#197645 = ORIENTED_EDGE('',*,*,#197646,.T.); +#197646 = EDGE_CURVE('',#197639,#197647,#197649,.T.); +#197647 = VERTEX_POINT('',#197648); +#197648 = CARTESIAN_POINT('',(95.929745,-80.852919,1.585)); +#197649 = CIRCLE('',#197650,7.500006711464E-02); +#197650 = AXIS2_PLACEMENT_3D('',#197651,#197652,#197653); +#197651 = CARTESIAN_POINT('',(95.929745067115,-80.77791893288,1.585)); +#197652 = DIRECTION('',(0.,0.,-1.)); +#197653 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#197654 = ORIENTED_EDGE('',*,*,#197655,.T.); +#197655 = EDGE_CURVE('',#197647,#197656,#197658,.T.); +#197656 = VERTEX_POINT('',#197657); +#197657 = CARTESIAN_POINT('',(95.521429,-80.852919,1.585)); +#197658 = LINE('',#197659,#197660); +#197659 = CARTESIAN_POINT('',(95.929745,-80.852919,1.585)); +#197660 = VECTOR('',#197661,1.); +#197661 = DIRECTION('',(-1.,0.,0.)); +#197662 = ORIENTED_EDGE('',*,*,#197663,.T.); +#197663 = EDGE_CURVE('',#197656,#197664,#197666,.T.); +#197664 = VERTEX_POINT('',#197665); +#197665 = CARTESIAN_POINT('',(95.49661,-81.101109,1.585)); +#197666 = LINE('',#197667,#197668); +#197667 = CARTESIAN_POINT('',(95.521429,-80.852919,1.585)); +#197668 = VECTOR('',#197669,1.); +#197669 = DIRECTION('',(-9.950371902098E-02,-0.99503719021,0.)); +#197670 = ORIENTED_EDGE('',*,*,#197671,.T.); +#197671 = EDGE_CURVE('',#197664,#197672,#197674,.T.); +#197672 = VERTEX_POINT('',#197673); +#197673 = CARTESIAN_POINT('',(95.534161,-81.085312,1.585)); +#197674 = LINE('',#197675,#197676); +#197675 = CARTESIAN_POINT('',(95.49661,-81.101109,1.585)); +#197676 = VECTOR('',#197677,1.); +#197677 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#197678 = ORIENTED_EDGE('',*,*,#197679,.T.); +#197679 = EDGE_CURVE('',#197672,#197680,#197682,.T.); +#197680 = VERTEX_POINT('',#197681); +#197681 = CARTESIAN_POINT('',(95.806697,-81.086534,1.585)); +#197682 = LINE('',#197683,#197684); +#197683 = CARTESIAN_POINT('',(95.534161,-81.085312,1.585)); +#197684 = VECTOR('',#197685,1.); +#197685 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#197686 = ORIENTED_EDGE('',*,*,#197687,.T.); +#197687 = EDGE_CURVE('',#197680,#197688,#197690,.T.); +#197688 = VERTEX_POINT('',#197689); +#197689 = CARTESIAN_POINT('',(96.050923,-81.334715,1.585)); +#197690 = CIRCLE('',#197691,0.348625649748); +#197691 = AXIS2_PLACEMENT_3D('',#197692,#197693,#197694); +#197692 = CARTESIAN_POINT('',(95.713525045865,-81.42247868387,1.585)); +#197693 = DIRECTION('',(0.,0.,-1.)); +#197694 = DIRECTION('',(0.267255017531,0.963625837971,0.)); +#197695 = ORIENTED_EDGE('',*,*,#197696,.T.); +#197696 = EDGE_CURVE('',#197688,#197697,#197699,.T.); +#197697 = VERTEX_POINT('',#197698); +#197698 = CARTESIAN_POINT('',(96.049701,-81.607252,1.585)); +#197699 = LINE('',#197700,#197701); +#197700 = CARTESIAN_POINT('',(96.050923,-81.334715,1.585)); +#197701 = VECTOR('',#197702,1.); +#197702 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#197703 = ORIENTED_EDGE('',*,*,#197704,.T.); +#197704 = EDGE_CURVE('',#197697,#197705,#197707,.T.); +#197705 = VERTEX_POINT('',#197706); +#197706 = CARTESIAN_POINT('',(95.80152,-81.851478,1.585)); +#197707 = CIRCLE('',#197708,0.348635327447); +#197708 = AXIS2_PLACEMENT_3D('',#197709,#197710,#197711); +#197709 = CARTESIAN_POINT('',(95.713748481291,-81.51407208415,1.585)); +#197710 = DIRECTION('',(0.,0.,-1.)); +#197711 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#197712 = ORIENTED_EDGE('',*,*,#197713,.T.); +#197713 = EDGE_CURVE('',#197705,#197714,#197716,.T.); +#197714 = VERTEX_POINT('',#197715); +#197715 = CARTESIAN_POINT('',(95.528983,-81.850256,1.585)); +#197716 = LINE('',#197717,#197718); +#197717 = CARTESIAN_POINT('',(95.80152,-81.851478,1.585)); +#197718 = VECTOR('',#197719,1.); +#197719 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#197720 = ORIENTED_EDGE('',*,*,#197721,.T.); +#197721 = EDGE_CURVE('',#197714,#197722,#197724,.T.); +#197722 = VERTEX_POINT('',#197723); +#197723 = CARTESIAN_POINT('',(95.40627,-81.78805,1.585)); +#197724 = LINE('',#197725,#197726); +#197725 = CARTESIAN_POINT('',(95.528983,-81.850256,1.585)); +#197726 = VECTOR('',#197727,1.); +#197727 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#197728 = ORIENTED_EDGE('',*,*,#197729,.T.); +#197729 = EDGE_CURVE('',#197722,#197730,#197732,.T.); +#197730 = VERTEX_POINT('',#197731); +#197731 = CARTESIAN_POINT('',(95.343575,-81.724347,1.585)); +#197732 = LINE('',#197733,#197734); +#197733 = CARTESIAN_POINT('',(95.40627,-81.78805,1.585)); +#197734 = VECTOR('',#197735,1.); +#197735 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#197736 = ORIENTED_EDGE('',*,*,#197737,.T.); +#197737 = EDGE_CURVE('',#197730,#197738,#197740,.T.); +#197738 = VERTEX_POINT('',#197739); +#197739 = CARTESIAN_POINT('',(95.45897,-81.629648,1.585)); +#197740 = CIRCLE('',#197741,7.50001266804E-02); +#197741 = AXIS2_PLACEMENT_3D('',#197742,#197743,#197744); +#197742 = CARTESIAN_POINT('',(95.405936051994,-81.68268024831,1.585)); +#197743 = DIRECTION('',(0.,0.,-1.)); +#197744 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#197745 = ORIENTED_EDGE('',*,*,#197746,.T.); +#197746 = EDGE_CURVE('',#197738,#197747,#197749,.T.); +#197747 = VERTEX_POINT('',#197748); +#197748 = CARTESIAN_POINT('',(95.497982,-81.668661,1.585)); +#197749 = LINE('',#197750,#197751); +#197750 = CARTESIAN_POINT('',(95.45897,-81.629648,1.585)); +#197751 = VECTOR('',#197752,1.); +#197752 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#197753 = ORIENTED_EDGE('',*,*,#197754,.T.); +#197754 = EDGE_CURVE('',#197747,#197755,#197757,.T.); +#197755 = VERTEX_POINT('',#197756); +#197756 = CARTESIAN_POINT('',(95.837698,-81.668661,1.585)); +#197757 = CIRCLE('',#197758,0.305620374329); +#197758 = AXIS2_PLACEMENT_3D('',#197759,#197760,#197761); +#197759 = CARTESIAN_POINT('',(95.66784,-81.41459,1.585)); +#197760 = DIRECTION('',(0.,0.,1.)); +#197761 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#197762 = ORIENTED_EDGE('',*,*,#197763,.T.); +#197763 = EDGE_CURVE('',#197755,#197764,#197766,.T.); +#197764 = VERTEX_POINT('',#197765); +#197765 = CARTESIAN_POINT('',(95.868105,-81.638253,1.585)); +#197766 = LINE('',#197767,#197768); +#197767 = CARTESIAN_POINT('',(95.837698,-81.668661,1.585)); +#197768 = VECTOR('',#197769,1.); +#197769 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#197770 = ORIENTED_EDGE('',*,*,#197771,.T.); +#197771 = EDGE_CURVE('',#197764,#197772,#197774,.T.); +#197772 = VERTEX_POINT('',#197773); +#197773 = CARTESIAN_POINT('',(95.868106,-81.298536,1.585)); +#197774 = CIRCLE('',#197775,0.305616146029); +#197775 = AXIS2_PLACEMENT_3D('',#197776,#197777,#197778); +#197776 = CARTESIAN_POINT('',(95.614039920493,-81.46839375212,1.585)); +#197777 = DIRECTION('',(0.,-0.,1.)); +#197778 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#197779 = ORIENTED_EDGE('',*,*,#197780,.T.); +#197780 = EDGE_CURVE('',#197772,#197781,#197783,.T.); +#197781 = VERTEX_POINT('',#197782); +#197782 = CARTESIAN_POINT('',(95.837699,-81.268129,1.585)); +#197783 = LINE('',#197784,#197785); +#197784 = CARTESIAN_POINT('',(95.868106,-81.298536,1.585)); +#197785 = VECTOR('',#197786,1.); +#197786 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197787 = ORIENTED_EDGE('',*,*,#197788,.T.); +#197788 = EDGE_CURVE('',#197781,#197789,#197791,.T.); +#197789 = VERTEX_POINT('',#197790); +#197790 = CARTESIAN_POINT('',(95.497982,-81.268129,1.585)); +#197791 = CIRCLE('',#197792,0.305621483548); +#197792 = AXIS2_PLACEMENT_3D('',#197793,#197794,#197795); +#197793 = CARTESIAN_POINT('',(95.6678405,-81.522201,1.585)); +#197794 = DIRECTION('',(0.,0.,1.)); +#197795 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#197796 = ORIENTED_EDGE('',*,*,#197797,.T.); +#197797 = EDGE_CURVE('',#197789,#197798,#197800,.T.); +#197798 = VERTEX_POINT('',#197799); +#197799 = CARTESIAN_POINT('',(95.441192,-81.320306,1.585)); +#197800 = LINE('',#197801,#197802); +#197801 = CARTESIAN_POINT('',(95.497982,-81.268129,1.585)); +#197802 = VECTOR('',#197803,1.); +#197803 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#197804 = ORIENTED_EDGE('',*,*,#197805,.T.); +#197805 = EDGE_CURVE('',#197798,#197806,#197808,.T.); +#197806 = VERTEX_POINT('',#197807); +#197807 = CARTESIAN_POINT('',(95.331286,-81.261349,1.585)); +#197808 = CIRCLE('',#197809,7.50002417247E-02); +#197809 = AXIS2_PLACEMENT_3D('',#197810,#197811,#197812); +#197810 = CARTESIAN_POINT('',(95.405935970023,-81.25410895619,1.585)); +#197811 = DIRECTION('',(-0.,0.,-1.)); +#197812 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#197813 = ORIENTED_EDGE('',*,*,#197814,.T.); +#197814 = EDGE_CURVE('',#197806,#197628,#197815,.T.); +#197815 = LINE('',#197816,#197817); +#197816 = CARTESIAN_POINT('',(95.331286,-81.261349,1.585)); +#197817 = VECTOR('',#197818,1.); +#197818 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#197819 = PLANE('',#197820); +#197820 = AXIS2_PLACEMENT_3D('',#197821,#197822,#197823); +#197821 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197822 = DIRECTION('',(0.,0.,1.)); +#197823 = DIRECTION('',(1.,0.,-0.)); +#197824 = SHELL_BASED_SURFACE_MODEL('',(#197825)); +#197825 = OPEN_SHELL('',(#197826)); +#197826 = ADVANCED_FACE('',(#197827,#197897),#197975,.T.); +#197827 = FACE_BOUND('',#197828,.F.); +#197828 = EDGE_LOOP('',(#197829,#197840,#197848,#197857,#197865,#197874, + #197882,#197891)); +#197829 = ORIENTED_EDGE('',*,*,#197830,.T.); +#197830 = EDGE_CURVE('',#197831,#197833,#197835,.T.); +#197831 = VERTEX_POINT('',#197832); +#197832 = CARTESIAN_POINT('',(164.08165,-80.0231,1.585)); +#197833 = VERTEX_POINT('',#197834); +#197834 = CARTESIAN_POINT('',(164.84165,-79.2631,1.585)); +#197835 = CIRCLE('',#197836,0.760000524771); +#197836 = AXIS2_PLACEMENT_3D('',#197837,#197838,#197839); +#197837 = CARTESIAN_POINT('',(164.84165052477,-80.02310052477,1.585)); +#197838 = DIRECTION('',(0.,0.,-1.)); +#197839 = DIRECTION('',(-1.,6.90487863415E-07,0.)); +#197840 = ORIENTED_EDGE('',*,*,#197841,.T.); +#197841 = EDGE_CURVE('',#197833,#197842,#197844,.T.); +#197842 = VERTEX_POINT('',#197843); +#197843 = CARTESIAN_POINT('',(166.24165,-79.2631,1.585)); +#197844 = LINE('',#197845,#197846); +#197845 = CARTESIAN_POINT('',(164.84165,-79.2631,1.585)); +#197846 = VECTOR('',#197847,1.); +#197847 = DIRECTION('',(1.,0.,0.)); +#197848 = ORIENTED_EDGE('',*,*,#197849,.T.); +#197849 = EDGE_CURVE('',#197842,#197850,#197852,.T.); +#197850 = VERTEX_POINT('',#197851); +#197851 = CARTESIAN_POINT('',(167.00165,-80.0231,1.585)); +#197852 = CIRCLE('',#197853,0.760000524771); +#197853 = AXIS2_PLACEMENT_3D('',#197854,#197855,#197856); +#197854 = CARTESIAN_POINT('',(166.24164947522,-80.02310052477,1.585)); +#197855 = DIRECTION('',(0.,0.,-1.)); +#197856 = DIRECTION('',(6.904878260181E-07,1.,0.)); +#197857 = ORIENTED_EDGE('',*,*,#197858,.T.); +#197858 = EDGE_CURVE('',#197850,#197859,#197861,.T.); +#197859 = VERTEX_POINT('',#197860); +#197860 = CARTESIAN_POINT('',(167.00165,-80.6231,1.585)); +#197861 = LINE('',#197862,#197863); +#197862 = CARTESIAN_POINT('',(167.00165,-80.0231,1.585)); +#197863 = VECTOR('',#197864,1.); +#197864 = DIRECTION('',(0.,-1.,0.)); +#197865 = ORIENTED_EDGE('',*,*,#197866,.T.); +#197866 = EDGE_CURVE('',#197859,#197867,#197869,.T.); +#197867 = VERTEX_POINT('',#197868); +#197868 = CARTESIAN_POINT('',(166.24165,-81.3831,1.585)); +#197869 = CIRCLE('',#197870,0.760000524771); +#197870 = AXIS2_PLACEMENT_3D('',#197871,#197872,#197873); +#197871 = CARTESIAN_POINT('',(166.24164947522,-80.62309947522,1.585)); +#197872 = DIRECTION('',(0.,0.,-1.)); +#197873 = DIRECTION('',(1.,-6.904878447166E-07,0.)); +#197874 = ORIENTED_EDGE('',*,*,#197875,.T.); +#197875 = EDGE_CURVE('',#197867,#197876,#197878,.T.); +#197876 = VERTEX_POINT('',#197877); +#197877 = CARTESIAN_POINT('',(164.84165,-81.3831,1.585)); +#197878 = LINE('',#197879,#197880); +#197879 = CARTESIAN_POINT('',(166.24165,-81.3831,1.585)); +#197880 = VECTOR('',#197881,1.); +#197881 = DIRECTION('',(-1.,0.,0.)); +#197882 = ORIENTED_EDGE('',*,*,#197883,.T.); +#197883 = EDGE_CURVE('',#197876,#197884,#197886,.T.); +#197884 = VERTEX_POINT('',#197885); +#197885 = CARTESIAN_POINT('',(164.08165,-80.6231,1.585)); +#197886 = CIRCLE('',#197887,0.760000524771); +#197887 = AXIS2_PLACEMENT_3D('',#197888,#197889,#197890); +#197888 = CARTESIAN_POINT('',(164.84165052477,-80.62309947522,1.585)); +#197889 = DIRECTION('',(0.,0.,-1.)); +#197890 = DIRECTION('',(-6.90487863415E-07,-1.,-0.)); +#197891 = ORIENTED_EDGE('',*,*,#197892,.T.); +#197892 = EDGE_CURVE('',#197884,#197831,#197893,.T.); +#197893 = LINE('',#197894,#197895); +#197894 = CARTESIAN_POINT('',(164.08165,-80.6231,1.585)); +#197895 = VECTOR('',#197896,1.); +#197896 = DIRECTION('',(0.,1.,0.)); +#197897 = FACE_BOUND('',#197898,.F.); +#197898 = EDGE_LOOP('',(#197899,#197910,#197918,#197926,#197935,#197943, + #197952,#197960,#197969)); +#197899 = ORIENTED_EDGE('',*,*,#197900,.T.); +#197900 = EDGE_CURVE('',#197901,#197903,#197905,.T.); +#197901 = VERTEX_POINT('',#197902); +#197902 = CARTESIAN_POINT('',(166.88165,-79.950989,1.585)); +#197903 = VERTEX_POINT('',#197904); +#197904 = CARTESIAN_POINT('',(166.313761,-79.3831,1.585)); +#197905 = CIRCLE('',#197906,0.64404917508); +#197906 = AXIS2_PLACEMENT_3D('',#197907,#197908,#197909); +#197907 = CARTESIAN_POINT('',(166.24165046088,-80.02309953911,1.585)); +#197908 = DIRECTION('',(0.,0.,1.)); +#197909 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#197910 = ORIENTED_EDGE('',*,*,#197911,.T.); +#197911 = EDGE_CURVE('',#197903,#197912,#197914,.T.); +#197912 = VERTEX_POINT('',#197913); +#197913 = CARTESIAN_POINT('',(164.84165,-79.3831,1.585)); +#197914 = LINE('',#197915,#197916); +#197915 = CARTESIAN_POINT('',(166.313761,-79.3831,1.585)); +#197916 = VECTOR('',#197917,1.); +#197917 = DIRECTION('',(-1.,0.,0.)); +#197918 = ORIENTED_EDGE('',*,*,#197919,.T.); +#197919 = EDGE_CURVE('',#197912,#197920,#197922,.T.); +#197920 = VERTEX_POINT('',#197921); +#197921 = CARTESIAN_POINT('',(164.769539,-79.3831,1.585)); +#197922 = LINE('',#197923,#197924); +#197923 = CARTESIAN_POINT('',(164.84165,-79.3831,1.585)); +#197924 = VECTOR('',#197925,1.); +#197925 = DIRECTION('',(-1.,0.,0.)); +#197926 = ORIENTED_EDGE('',*,*,#197927,.T.); +#197927 = EDGE_CURVE('',#197920,#197928,#197930,.T.); +#197928 = VERTEX_POINT('',#197929); +#197929 = CARTESIAN_POINT('',(164.20165,-79.950989,1.585)); +#197930 = CIRCLE('',#197931,0.64404917508); +#197931 = AXIS2_PLACEMENT_3D('',#197932,#197933,#197934); +#197932 = CARTESIAN_POINT('',(164.84164953911,-80.02309953911,1.585)); +#197933 = DIRECTION('',(0.,0.,1.)); +#197934 = DIRECTION('',(-0.111964337362,0.993712225526,0.)); +#197935 = ORIENTED_EDGE('',*,*,#197936,.T.); +#197936 = EDGE_CURVE('',#197928,#197937,#197939,.T.); +#197937 = VERTEX_POINT('',#197938); +#197938 = CARTESIAN_POINT('',(164.20165,-80.695211,1.585)); +#197939 = LINE('',#197940,#197941); +#197940 = CARTESIAN_POINT('',(164.20165,-79.950989,1.585)); +#197941 = VECTOR('',#197942,1.); +#197942 = DIRECTION('',(0.,-1.,0.)); +#197943 = ORIENTED_EDGE('',*,*,#197944,.T.); +#197944 = EDGE_CURVE('',#197937,#197945,#197947,.T.); +#197945 = VERTEX_POINT('',#197946); +#197946 = CARTESIAN_POINT('',(164.769539,-81.2631,1.585)); +#197947 = CIRCLE('',#197948,0.64404917508); +#197948 = AXIS2_PLACEMENT_3D('',#197949,#197950,#197951); +#197949 = CARTESIAN_POINT('',(164.84164953911,-80.62310046088,1.585)); +#197950 = DIRECTION('',(0.,0.,1.)); +#197951 = DIRECTION('',(-0.993712225526,-0.111964337362,0.)); +#197952 = ORIENTED_EDGE('',*,*,#197953,.T.); +#197953 = EDGE_CURVE('',#197945,#197954,#197956,.T.); +#197954 = VERTEX_POINT('',#197955); +#197955 = CARTESIAN_POINT('',(166.313761,-81.2631,1.585)); +#197956 = LINE('',#197957,#197958); +#197957 = CARTESIAN_POINT('',(164.769539,-81.2631,1.585)); +#197958 = VECTOR('',#197959,1.); +#197959 = DIRECTION('',(1.,0.,0.)); +#197960 = ORIENTED_EDGE('',*,*,#197961,.T.); +#197961 = EDGE_CURVE('',#197954,#197962,#197964,.T.); +#197962 = VERTEX_POINT('',#197963); +#197963 = CARTESIAN_POINT('',(166.88165,-80.695211,1.585)); +#197964 = CIRCLE('',#197965,0.64404917508); +#197965 = AXIS2_PLACEMENT_3D('',#197966,#197967,#197968); +#197966 = CARTESIAN_POINT('',(166.24165046088,-80.62310046088,1.585)); +#197967 = DIRECTION('',(0.,0.,1.)); +#197968 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#197969 = ORIENTED_EDGE('',*,*,#197970,.T.); +#197970 = EDGE_CURVE('',#197962,#197901,#197971,.T.); +#197971 = LINE('',#197972,#197973); +#197972 = CARTESIAN_POINT('',(166.88165,-80.695211,1.585)); +#197973 = VECTOR('',#197974,1.); +#197974 = DIRECTION('',(0.,1.,0.)); +#197975 = PLANE('',#197976); +#197976 = AXIS2_PLACEMENT_3D('',#197977,#197978,#197979); +#197977 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197978 = DIRECTION('',(0.,0.,1.)); +#197979 = DIRECTION('',(1.,0.,-0.)); +#197980 = SHELL_BASED_SURFACE_MODEL('',(#197981)); +#197981 = OPEN_SHELL('',(#197982)); +#197982 = ADVANCED_FACE('',(#197983,#198084),#198167,.T.); +#197983 = FACE_BOUND('',#197984,.F.); +#197984 = EDGE_LOOP('',(#197985,#197996,#198004,#198012,#198020,#198029, + #198037,#198045,#198053,#198061,#198069,#198078)); +#197985 = ORIENTED_EDGE('',*,*,#197986,.T.); +#197986 = EDGE_CURVE('',#197987,#197989,#197991,.T.); +#197987 = VERTEX_POINT('',#197988); +#197988 = CARTESIAN_POINT('',(172.020714,-80.409597,1.585)); +#197989 = VERTEX_POINT('',#197990); +#197990 = CARTESIAN_POINT('',(172.085714,-80.344597,1.585)); +#197991 = CIRCLE('',#197992,6.500103935393E-02); +#197992 = AXIS2_PLACEMENT_3D('',#197993,#197994,#197995); +#197993 = CARTESIAN_POINT('',(172.08571503934,-80.40959803934,1.585)); +#197994 = DIRECTION('',(0.,0.,-1.)); +#197995 = DIRECTION('',(-0.999999999872,1.598967671081E-05,0.)); +#197996 = ORIENTED_EDGE('',*,*,#197997,.T.); +#197997 = EDGE_CURVE('',#197989,#197998,#198000,.T.); +#197998 = VERTEX_POINT('',#197999); +#197999 = CARTESIAN_POINT('',(172.310222,-80.34663,1.585)); +#198000 = LINE('',#198001,#198002); +#198001 = CARTESIAN_POINT('',(172.085714,-80.344597,1.585)); +#198002 = VECTOR('',#198003,1.); +#198003 = DIRECTION('',(0.99995900278,-9.054985357593E-03,0.)); +#198004 = ORIENTED_EDGE('',*,*,#198005,.T.); +#198005 = EDGE_CURVE('',#197998,#198006,#198008,.T.); +#198006 = VERTEX_POINT('',#198007); +#198007 = CARTESIAN_POINT('',(172.46211,-80.398191,1.585)); +#198008 = LINE('',#198009,#198010); +#198009 = CARTESIAN_POINT('',(172.310222,-80.34663,1.585)); +#198010 = VECTOR('',#198011,1.); +#198011 = DIRECTION('',(0.946926388211,-0.32145048656,0.)); +#198012 = ORIENTED_EDGE('',*,*,#198013,.T.); +#198013 = EDGE_CURVE('',#198006,#198014,#198016,.T.); +#198014 = VERTEX_POINT('',#198015); +#198015 = CARTESIAN_POINT('',(172.566037,-80.50087,1.585)); +#198016 = LINE('',#198017,#198018); +#198017 = CARTESIAN_POINT('',(172.46211,-80.398191,1.585)); +#198018 = VECTOR('',#198019,1.); +#198019 = DIRECTION('',(0.711365069748,-0.70282269282,0.)); +#198020 = ORIENTED_EDGE('',*,*,#198021,.T.); +#198021 = EDGE_CURVE('',#198014,#198022,#198024,.T.); +#198022 = VERTEX_POINT('',#198023); +#198023 = CARTESIAN_POINT('',(172.663059,-80.939647,1.585)); +#198024 = CIRCLE('',#198025,0.67543082859); +#198025 = AXIS2_PLACEMENT_3D('',#198026,#198027,#198028); +#198026 = CARTESIAN_POINT('',(171.99260778858,-80.85778139475,1.585)); +#198027 = DIRECTION('',(0.,0.,-1.)); +#198028 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#198029 = ORIENTED_EDGE('',*,*,#198030,.T.); +#198030 = EDGE_CURVE('',#198022,#198031,#198033,.T.); +#198031 = VERTEX_POINT('',#198032); +#198032 = CARTESIAN_POINT('',(172.615281,-81.12438,1.585)); +#198033 = LINE('',#198034,#198035); +#198034 = CARTESIAN_POINT('',(172.663059,-80.939647,1.585)); +#198035 = VECTOR('',#198036,1.); +#198036 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#198037 = ORIENTED_EDGE('',*,*,#198038,.T.); +#198038 = EDGE_CURVE('',#198031,#198039,#198041,.T.); +#198039 = VERTEX_POINT('',#198040); +#198040 = CARTESIAN_POINT('',(172.560248,-81.226987,1.585)); +#198041 = LINE('',#198042,#198043); +#198042 = CARTESIAN_POINT('',(172.615281,-81.12438,1.585)); +#198043 = VECTOR('',#198044,1.); +#198044 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#198045 = ORIENTED_EDGE('',*,*,#198046,.T.); +#198046 = EDGE_CURVE('',#198039,#198047,#198049,.T.); +#198047 = VERTEX_POINT('',#198048); +#198048 = CARTESIAN_POINT('',(172.462114,-81.320999,1.585)); +#198049 = LINE('',#198050,#198051); +#198050 = CARTESIAN_POINT('',(172.560248,-81.226987,1.585)); +#198051 = VECTOR('',#198052,1.); +#198052 = DIRECTION('',(-0.722109804107,-0.691778455008,0.)); +#198053 = ORIENTED_EDGE('',*,*,#198054,.T.); +#198054 = EDGE_CURVE('',#198047,#198055,#198057,.T.); +#198055 = VERTEX_POINT('',#198056); +#198056 = CARTESIAN_POINT('',(172.310222,-81.372563,1.585)); +#198057 = LINE('',#198058,#198059); +#198058 = CARTESIAN_POINT('',(172.462114,-81.320999,1.585)); +#198059 = VECTOR('',#198060,1.); +#198060 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#198061 = ORIENTED_EDGE('',*,*,#198062,.T.); +#198062 = EDGE_CURVE('',#198055,#198063,#198065,.T.); +#198063 = VERTEX_POINT('',#198064); +#198064 = CARTESIAN_POINT('',(172.085714,-81.374597,1.585)); +#198065 = LINE('',#198066,#198067); +#198066 = CARTESIAN_POINT('',(172.310222,-81.372563,1.585)); +#198067 = VECTOR('',#198068,1.); +#198068 = DIRECTION('',(-0.999958962441,-9.059438993705E-03,0.)); +#198069 = ORIENTED_EDGE('',*,*,#198070,.T.); +#198070 = EDGE_CURVE('',#198063,#198071,#198073,.T.); +#198071 = VERTEX_POINT('',#198072); +#198072 = CARTESIAN_POINT('',(172.020714,-81.309597,1.585)); +#198073 = CIRCLE('',#198074,6.500103935393E-02); +#198074 = AXIS2_PLACEMENT_3D('',#198075,#198076,#198077); +#198075 = CARTESIAN_POINT('',(172.08571503934,-81.30959596065,1.585)); +#198076 = DIRECTION('',(0.,0.,-1.)); +#198077 = DIRECTION('',(-1.598967692944E-05,-0.999999999872,-0.)); +#198078 = ORIENTED_EDGE('',*,*,#198079,.T.); +#198079 = EDGE_CURVE('',#198071,#197987,#198080,.T.); +#198080 = LINE('',#198081,#198082); +#198081 = CARTESIAN_POINT('',(172.020714,-81.309597,1.585)); +#198082 = VECTOR('',#198083,1.); +#198083 = DIRECTION('',(0.,1.,0.)); +#198084 = FACE_BOUND('',#198085,.F.); +#198085 = EDGE_LOOP('',(#198086,#198096,#198104,#198112,#198120,#198128, + #198136,#198145,#198153,#198161)); +#198086 = ORIENTED_EDGE('',*,*,#198087,.T.); +#198087 = EDGE_CURVE('',#198088,#198090,#198092,.T.); +#198088 = VERTEX_POINT('',#198089); +#198089 = CARTESIAN_POINT('',(172.393458,-80.509265,1.585)); +#198090 = VERTEX_POINT('',#198091); +#198091 = CARTESIAN_POINT('',(172.289453,-80.474597,1.585)); +#198092 = LINE('',#198093,#198094); +#198093 = CARTESIAN_POINT('',(172.393458,-80.509265,1.585)); +#198094 = VECTOR('',#198095,1.); +#198095 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#198096 = ORIENTED_EDGE('',*,*,#198097,.T.); +#198097 = EDGE_CURVE('',#198090,#198098,#198100,.T.); +#198098 = VERTEX_POINT('',#198099); +#198099 = CARTESIAN_POINT('',(172.150714,-80.474597,1.585)); +#198100 = LINE('',#198101,#198102); +#198101 = CARTESIAN_POINT('',(172.289453,-80.474597,1.585)); +#198102 = VECTOR('',#198103,1.); +#198103 = DIRECTION('',(-1.,0.,0.)); +#198104 = ORIENTED_EDGE('',*,*,#198105,.T.); +#198105 = EDGE_CURVE('',#198098,#198106,#198108,.T.); +#198106 = VERTEX_POINT('',#198107); +#198107 = CARTESIAN_POINT('',(172.150714,-81.244597,1.585)); +#198108 = LINE('',#198109,#198110); +#198109 = CARTESIAN_POINT('',(172.150714,-80.474597,1.585)); +#198110 = VECTOR('',#198111,1.); +#198111 = DIRECTION('',(0.,-1.,0.)); +#198112 = ORIENTED_EDGE('',*,*,#198113,.T.); +#198113 = EDGE_CURVE('',#198106,#198114,#198116,.T.); +#198114 = VERTEX_POINT('',#198115); +#198115 = CARTESIAN_POINT('',(172.289453,-81.244597,1.585)); +#198116 = LINE('',#198117,#198118); +#198117 = CARTESIAN_POINT('',(172.150714,-81.244597,1.585)); +#198118 = VECTOR('',#198119,1.); +#198119 = DIRECTION('',(1.,0.,0.)); +#198120 = ORIENTED_EDGE('',*,*,#198121,.T.); +#198121 = EDGE_CURVE('',#198114,#198122,#198124,.T.); +#198122 = VERTEX_POINT('',#198123); +#198123 = CARTESIAN_POINT('',(172.393458,-81.209928,1.585)); +#198124 = LINE('',#198125,#198126); +#198125 = CARTESIAN_POINT('',(172.289453,-81.244597,1.585)); +#198126 = VECTOR('',#198127,1.); +#198127 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#198128 = ORIENTED_EDGE('',*,*,#198129,.T.); +#198129 = EDGE_CURVE('',#198122,#198130,#198132,.T.); +#198130 = VERTEX_POINT('',#198131); +#198131 = CARTESIAN_POINT('',(172.460865,-81.142522,1.585)); +#198132 = LINE('',#198133,#198134); +#198133 = CARTESIAN_POINT('',(172.393458,-81.209928,1.585)); +#198134 = VECTOR('',#198135,1.); +#198135 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#198136 = ORIENTED_EDGE('',*,*,#198137,.T.); +#198137 = EDGE_CURVE('',#198130,#198138,#198140,.T.); +#198138 = VERTEX_POINT('',#198139); +#198139 = CARTESIAN_POINT('',(172.535,-80.803311,1.585)); +#198140 = CIRCLE('',#198141,0.553325470753); +#198141 = AXIS2_PLACEMENT_3D('',#198142,#198143,#198144); +#198142 = CARTESIAN_POINT('',(171.98466292366,-80.86074077444,1.585)); +#198143 = DIRECTION('',(0.,0.,1.)); +#198144 = DIRECTION('',(0.860618390997,-0.509250414901,0.)); +#198145 = ORIENTED_EDGE('',*,*,#198146,.T.); +#198146 = EDGE_CURVE('',#198138,#198147,#198149,.T.); +#198147 = VERTEX_POINT('',#198148); +#198148 = CARTESIAN_POINT('',(172.495814,-80.64657,1.585)); +#198149 = LINE('',#198150,#198151); +#198150 = CARTESIAN_POINT('',(172.535,-80.803311,1.585)); +#198151 = VECTOR('',#198152,1.); +#198152 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#198153 = ORIENTED_EDGE('',*,*,#198154,.T.); +#198154 = EDGE_CURVE('',#198147,#198155,#198157,.T.); +#198155 = VERTEX_POINT('',#198156); +#198156 = CARTESIAN_POINT('',(172.460864,-80.576669,1.585)); +#198157 = LINE('',#198158,#198159); +#198158 = CARTESIAN_POINT('',(172.495814,-80.64657,1.585)); +#198159 = VECTOR('',#198160,1.); +#198160 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#198161 = ORIENTED_EDGE('',*,*,#198162,.T.); +#198162 = EDGE_CURVE('',#198155,#198088,#198163,.T.); +#198163 = LINE('',#198164,#198165); +#198164 = CARTESIAN_POINT('',(172.460864,-80.576669,1.585)); +#198165 = VECTOR('',#198166,1.); +#198166 = DIRECTION('',(-0.707117271529,0.707096290689,0.)); +#198167 = PLANE('',#198168); +#198168 = AXIS2_PLACEMENT_3D('',#198169,#198170,#198171); +#198169 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198170 = DIRECTION('',(0.,0.,1.)); +#198171 = DIRECTION('',(1.,0.,-0.)); +#198172 = SHELL_BASED_SURFACE_MODEL('',(#198173)); +#198173 = OPEN_SHELL('',(#198174)); +#198174 = ADVANCED_FACE('',(#198175),#198293,.T.); +#198175 = FACE_BOUND('',#198176,.F.); +#198176 = EDGE_LOOP('',(#198177,#198188,#198196,#198204,#198212,#198220, + #198228,#198236,#198245,#198253,#198262,#198270,#198278,#198287)); +#198177 = ORIENTED_EDGE('',*,*,#198178,.T.); +#198178 = EDGE_CURVE('',#198179,#198181,#198183,.T.); +#198179 = VERTEX_POINT('',#198180); +#198180 = CARTESIAN_POINT('',(171.077857,-80.409597,1.585)); +#198181 = VERTEX_POINT('',#198182); +#198182 = CARTESIAN_POINT('',(171.13466,-80.345116,1.585)); +#198183 = CIRCLE('',#198184,6.499996854978E-02); +#198184 = AXIS2_PLACEMENT_3D('',#198185,#198186,#198187); +#198185 = CARTESIAN_POINT('',(171.14285696855,-80.40959704851,1.585)); +#198186 = DIRECTION('',(0.,0.,-1.)); +#198187 = DIRECTION('',(-1.,7.464412463358E-07,0.)); +#198188 = ORIENTED_EDGE('',*,*,#198189,.T.); +#198189 = EDGE_CURVE('',#198181,#198190,#198192,.T.); +#198190 = VERTEX_POINT('',#198191); +#198191 = CARTESIAN_POINT('',(171.150899,-80.349545,1.585)); +#198192 = LINE('',#198193,#198194); +#198193 = CARTESIAN_POINT('',(171.13466,-80.345116,1.585)); +#198194 = VECTOR('',#198195,1.); +#198195 = DIRECTION('',(0.964761079179,-0.263127459799,0.)); +#198196 = ORIENTED_EDGE('',*,*,#198197,.T.); +#198197 = EDGE_CURVE('',#198190,#198198,#198200,.T.); +#198198 = VERTEX_POINT('',#198199); +#198199 = CARTESIAN_POINT('',(171.167731,-80.349545,1.585)); +#198200 = LINE('',#198201,#198202); +#198201 = CARTESIAN_POINT('',(171.150899,-80.349545,1.585)); +#198202 = VECTOR('',#198203,1.); +#198203 = DIRECTION('',(1.,0.,0.)); +#198204 = ORIENTED_EDGE('',*,*,#198205,.T.); +#198205 = EDGE_CURVE('',#198198,#198206,#198208,.T.); +#198206 = VERTEX_POINT('',#198207); +#198207 = CARTESIAN_POINT('',(171.182656,-80.358206,1.585)); +#198208 = LINE('',#198209,#198210); +#198209 = CARTESIAN_POINT('',(171.167731,-80.349545,1.585)); +#198210 = VECTOR('',#198211,1.); +#198211 = DIRECTION('',(0.864917988571,-0.501913212663,0.)); +#198212 = ORIENTED_EDGE('',*,*,#198213,.T.); +#198213 = EDGE_CURVE('',#198206,#198214,#198216,.T.); +#198214 = VERTEX_POINT('',#198215); +#198215 = CARTESIAN_POINT('',(171.199293,-80.377348,1.585)); +#198216 = LINE('',#198217,#198218); +#198217 = CARTESIAN_POINT('',(171.182656,-80.358206,1.585)); +#198218 = VECTOR('',#198219,1.); +#198219 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#198220 = ORIENTED_EDGE('',*,*,#198221,.T.); +#198221 = EDGE_CURVE('',#198214,#198222,#198224,.T.); +#198222 = VERTEX_POINT('',#198223); +#198223 = CARTESIAN_POINT('',(171.592143,-81.064835,1.585)); +#198224 = LINE('',#198225,#198226); +#198225 = CARTESIAN_POINT('',(171.199293,-80.377348,1.585)); +#198226 = VECTOR('',#198227,1.); +#198227 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#198228 = ORIENTED_EDGE('',*,*,#198229,.T.); +#198229 = EDGE_CURVE('',#198222,#198230,#198232,.T.); +#198230 = VERTEX_POINT('',#198231); +#198231 = CARTESIAN_POINT('',(171.592143,-80.409597,1.585)); +#198232 = LINE('',#198233,#198234); +#198233 = CARTESIAN_POINT('',(171.592143,-81.064835,1.585)); +#198234 = VECTOR('',#198235,1.); +#198235 = DIRECTION('',(0.,1.,0.)); +#198236 = ORIENTED_EDGE('',*,*,#198237,.T.); +#198237 = EDGE_CURVE('',#198230,#198238,#198240,.T.); +#198238 = VERTEX_POINT('',#198239); +#198239 = CARTESIAN_POINT('',(171.722143,-80.409597,1.585)); +#198240 = CIRCLE('',#198241,6.500000000092E-02); +#198241 = AXIS2_PLACEMENT_3D('',#198242,#198243,#198244); +#198242 = CARTESIAN_POINT('',(171.657143,-80.40959734486,1.585)); +#198243 = DIRECTION('',(0.,0.,-1.)); +#198244 = DIRECTION('',(-0.999999999986,5.305658244295E-06,0.)); +#198245 = ORIENTED_EDGE('',*,*,#198246,.T.); +#198246 = EDGE_CURVE('',#198238,#198247,#198249,.T.); +#198247 = VERTEX_POINT('',#198248); +#198248 = CARTESIAN_POINT('',(171.722143,-81.309597,1.585)); +#198249 = LINE('',#198250,#198251); +#198250 = CARTESIAN_POINT('',(171.722143,-80.409597,1.585)); +#198251 = VECTOR('',#198252,1.); +#198252 = DIRECTION('',(0.,-1.,0.)); +#198253 = ORIENTED_EDGE('',*,*,#198254,.T.); +#198254 = EDGE_CURVE('',#198247,#198255,#198257,.T.); +#198255 = VERTEX_POINT('',#198256); +#198256 = CARTESIAN_POINT('',(171.600707,-81.341846,1.585)); +#198257 = CIRCLE('',#198258,6.50002119414E-02); +#198258 = AXIS2_PLACEMENT_3D('',#198259,#198260,#198261); +#198259 = CARTESIAN_POINT('',(171.65714278806,-81.30959651351,1.585)); +#198260 = DIRECTION('',(-0.,0.,-1.)); +#198261 = DIRECTION('',(0.999999999972,-7.484332115465E-06,-0.)); +#198262 = ORIENTED_EDGE('',*,*,#198263,.T.); +#198263 = EDGE_CURVE('',#198255,#198264,#198266,.T.); +#198264 = VERTEX_POINT('',#198265); +#198265 = CARTESIAN_POINT('',(171.207857,-80.654358,1.585)); +#198266 = LINE('',#198267,#198268); +#198267 = CARTESIAN_POINT('',(171.600707,-81.341846,1.585)); +#198268 = VECTOR('',#198269,1.); +#198269 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#198270 = ORIENTED_EDGE('',*,*,#198271,.T.); +#198271 = EDGE_CURVE('',#198264,#198272,#198274,.T.); +#198272 = VERTEX_POINT('',#198273); +#198273 = CARTESIAN_POINT('',(171.207857,-81.309597,1.585)); +#198274 = LINE('',#198275,#198276); +#198275 = CARTESIAN_POINT('',(171.207857,-80.654358,1.585)); +#198276 = VECTOR('',#198277,1.); +#198277 = DIRECTION('',(0.,-1.,0.)); +#198278 = ORIENTED_EDGE('',*,*,#198279,.T.); +#198279 = EDGE_CURVE('',#198272,#198280,#198282,.T.); +#198280 = VERTEX_POINT('',#198281); +#198281 = CARTESIAN_POINT('',(171.077857,-81.309597,1.585)); +#198282 = CIRCLE('',#198283,6.500000000092E-02); +#198283 = AXIS2_PLACEMENT_3D('',#198284,#198285,#198286); +#198284 = CARTESIAN_POINT('',(171.142857,-81.30959665513,1.585)); +#198285 = DIRECTION('',(-0.,0.,-1.)); +#198286 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#198287 = ORIENTED_EDGE('',*,*,#198288,.T.); +#198288 = EDGE_CURVE('',#198280,#198179,#198289,.T.); +#198289 = LINE('',#198290,#198291); +#198290 = CARTESIAN_POINT('',(171.077857,-81.309597,1.585)); +#198291 = VECTOR('',#198292,1.); +#198292 = DIRECTION('',(0.,1.,0.)); +#198293 = PLANE('',#198294); +#198294 = AXIS2_PLACEMENT_3D('',#198295,#198296,#198297); +#198295 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198296 = DIRECTION('',(0.,0.,1.)); +#198297 = DIRECTION('',(1.,0.,-0.)); +#198298 = SHELL_BASED_SURFACE_MODEL('',(#198299)); +#198299 = OPEN_SHELL('',(#198300)); +#198300 = ADVANCED_FACE('',(#198301),#198551,.T.); +#198301 = FACE_BOUND('',#198302,.F.); +#198302 = EDGE_LOOP('',(#198303,#198313,#198321,#198330,#198338,#198347, + #198355,#198363,#198371,#198379,#198388,#198396,#198404,#198412, + #198421,#198429,#198437,#198445,#198454,#198462,#198471,#198479, + #198487,#198495,#198503,#198512,#198520,#198529,#198537,#198545)); +#198303 = ORIENTED_EDGE('',*,*,#198304,.T.); +#198304 = EDGE_CURVE('',#198305,#198307,#198309,.T.); +#198305 = VERTEX_POINT('',#198306); +#198306 = CARTESIAN_POINT('',(170.337892,-80.39819,1.585)); +#198307 = VERTEX_POINT('',#198308); +#198308 = CARTESIAN_POINT('',(170.489777,-80.34663,1.585)); +#198309 = LINE('',#198310,#198311); +#198310 = CARTESIAN_POINT('',(170.337892,-80.39819,1.585)); +#198311 = VECTOR('',#198312,1.); +#198312 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#198313 = ORIENTED_EDGE('',*,*,#198314,.T.); +#198314 = EDGE_CURVE('',#198307,#198315,#198317,.T.); +#198315 = VERTEX_POINT('',#198316); +#198316 = CARTESIAN_POINT('',(170.631765,-80.345232,1.585)); +#198317 = LINE('',#198318,#198319); +#198318 = CARTESIAN_POINT('',(170.489777,-80.34663,1.585)); +#198319 = VECTOR('',#198320,1.); +#198320 = DIRECTION('',(0.999951532626,9.845425265658E-03,0.)); +#198321 = ORIENTED_EDGE('',*,*,#198322,.T.); +#198322 = EDGE_CURVE('',#198315,#198323,#198325,.T.); +#198323 = VERTEX_POINT('',#198324); +#198324 = CARTESIAN_POINT('',(170.76339,-80.409866,1.585)); +#198325 = CIRCLE('',#198326,0.276414597199); +#198326 = AXIS2_PLACEMENT_3D('',#198327,#198328,#198329); +#198327 = CARTESIAN_POINT('',(170.58010572554,-80.61677637741,1.585)); +#198328 = DIRECTION('',(0.,0.,-1.)); +#198329 = DIRECTION('',(0.186890544039,0.982380743169,0.)); +#198330 = ORIENTED_EDGE('',*,*,#198331,.T.); +#198331 = EDGE_CURVE('',#198323,#198332,#198334,.T.); +#198332 = VERTEX_POINT('',#198333); +#198333 = CARTESIAN_POINT('',(170.779122,-80.457062,1.585)); +#198334 = LINE('',#198335,#198336); +#198335 = CARTESIAN_POINT('',(170.76339,-80.409866,1.585)); +#198336 = VECTOR('',#198337,1.); +#198337 = DIRECTION('',(0.316227766017,-0.94868329805,0.)); +#198338 = ORIENTED_EDGE('',*,*,#198339,.T.); +#198339 = EDGE_CURVE('',#198332,#198340,#198342,.T.); +#198340 = VERTEX_POINT('',#198341); +#198341 = CARTESIAN_POINT('',(170.685217,-80.510592,1.585)); +#198342 = CIRCLE('',#198343,6.500026004257E-02); +#198343 = AXIS2_PLACEMENT_3D('',#198344,#198345,#198346); +#198344 = CARTESIAN_POINT('',(170.71428530559,-80.45245365279,1.585)); +#198345 = DIRECTION('',(0.,0.,-1.)); +#198346 = DIRECTION('',(0.997483615677,-7.089736565004E-02,0.)); +#198347 = ORIENTED_EDGE('',*,*,#198348,.T.); +#198348 = EDGE_CURVE('',#198340,#198349,#198351,.T.); +#198349 = VERTEX_POINT('',#198350); +#198350 = CARTESIAN_POINT('',(170.613227,-80.474597,1.585)); +#198351 = LINE('',#198352,#198353); +#198352 = CARTESIAN_POINT('',(170.685217,-80.510592,1.585)); +#198353 = VECTOR('',#198354,1.); +#198354 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#198355 = ORIENTED_EDGE('',*,*,#198356,.T.); +#198356 = EDGE_CURVE('',#198349,#198357,#198359,.T.); +#198357 = VERTEX_POINT('',#198358); +#198358 = CARTESIAN_POINT('',(170.510547,-80.474597,1.585)); +#198359 = LINE('',#198360,#198361); +#198360 = CARTESIAN_POINT('',(170.613227,-80.474597,1.585)); +#198361 = VECTOR('',#198362,1.); +#198362 = DIRECTION('',(-1.,0.,0.)); +#198363 = ORIENTED_EDGE('',*,*,#198364,.T.); +#198364 = EDGE_CURVE('',#198357,#198365,#198367,.T.); +#198365 = VERTEX_POINT('',#198366); +#198366 = CARTESIAN_POINT('',(170.406541,-80.509265,1.585)); +#198367 = LINE('',#198368,#198369); +#198368 = CARTESIAN_POINT('',(170.510547,-80.474597,1.585)); +#198369 = VECTOR('',#198370,1.); +#198370 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#198371 = ORIENTED_EDGE('',*,*,#198372,.T.); +#198372 = EDGE_CURVE('',#198365,#198373,#198375,.T.); +#198373 = VERTEX_POINT('',#198374); +#198374 = CARTESIAN_POINT('',(170.339134,-80.576671,1.585)); +#198375 = LINE('',#198376,#198377); +#198376 = CARTESIAN_POINT('',(170.406541,-80.509265,1.585)); +#198377 = VECTOR('',#198378,1.); +#198378 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#198379 = ORIENTED_EDGE('',*,*,#198380,.T.); +#198380 = EDGE_CURVE('',#198373,#198381,#198383,.T.); +#198381 = VERTEX_POINT('',#198382); +#198382 = CARTESIAN_POINT('',(170.265,-80.915881,1.585)); +#198383 = CIRCLE('',#198384,0.553307903116); +#198384 = AXIS2_PLACEMENT_3D('',#198385,#198386,#198387); +#198385 = CARTESIAN_POINT('',(170.81531893982,-80.85844668868,1.585)); +#198386 = DIRECTION('',(0.,0.,1.)); +#198387 = DIRECTION('',(-0.860614744786,0.509256576842,0.)); +#198388 = ORIENTED_EDGE('',*,*,#198389,.T.); +#198389 = EDGE_CURVE('',#198381,#198390,#198392,.T.); +#198390 = VERTEX_POINT('',#198391); +#198391 = CARTESIAN_POINT('',(170.304185,-81.072622,1.585)); +#198392 = LINE('',#198393,#198394); +#198393 = CARTESIAN_POINT('',(170.265,-80.915881,1.585)); +#198394 = VECTOR('',#198395,1.); +#198395 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#198396 = ORIENTED_EDGE('',*,*,#198397,.T.); +#198397 = EDGE_CURVE('',#198390,#198398,#198400,.T.); +#198398 = VERTEX_POINT('',#198399); +#198399 = CARTESIAN_POINT('',(170.339135,-81.142522,1.585)); +#198400 = LINE('',#198401,#198402); +#198401 = CARTESIAN_POINT('',(170.304185,-81.072622,1.585)); +#198402 = VECTOR('',#198403,1.); +#198403 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#198404 = ORIENTED_EDGE('',*,*,#198405,.T.); +#198405 = EDGE_CURVE('',#198398,#198406,#198408,.T.); +#198406 = VERTEX_POINT('',#198407); +#198407 = CARTESIAN_POINT('',(170.406541,-81.209928,1.585)); +#198408 = LINE('',#198409,#198410); +#198409 = CARTESIAN_POINT('',(170.339135,-81.142522,1.585)); +#198410 = VECTOR('',#198411,1.); +#198411 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#198412 = ORIENTED_EDGE('',*,*,#198413,.T.); +#198413 = EDGE_CURVE('',#198406,#198414,#198416,.T.); +#198414 = VERTEX_POINT('',#198415); +#198415 = CARTESIAN_POINT('',(170.679175,-81.209927,1.585)); +#198416 = CIRCLE('',#198417,0.272195913582); +#198417 = AXIS2_PLACEMENT_3D('',#198418,#198419,#198420); +#198418 = CARTESIAN_POINT('',(170.54285713583,-80.97432552445,1.585)); +#198419 = DIRECTION('',(0.,0.,1.)); +#198420 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#198421 = ORIENTED_EDGE('',*,*,#198422,.T.); +#198422 = EDGE_CURVE('',#198414,#198423,#198425,.T.); +#198423 = VERTEX_POINT('',#198424); +#198424 = CARTESIAN_POINT('',(170.692143,-81.196958,1.585)); +#198425 = LINE('',#198426,#198427); +#198426 = CARTESIAN_POINT('',(170.679175,-81.209927,1.585)); +#198427 = VECTOR('',#198428,1.); +#198428 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#198429 = ORIENTED_EDGE('',*,*,#198430,.T.); +#198430 = EDGE_CURVE('',#198423,#198431,#198433,.T.); +#198431 = VERTEX_POINT('',#198432); +#198432 = CARTESIAN_POINT('',(170.692143,-80.988882,1.585)); +#198433 = LINE('',#198434,#198435); +#198434 = CARTESIAN_POINT('',(170.692143,-81.196958,1.585)); +#198435 = VECTOR('',#198436,1.); +#198436 = DIRECTION('',(0.,1.,0.)); +#198437 = ORIENTED_EDGE('',*,*,#198438,.T.); +#198438 = EDGE_CURVE('',#198431,#198439,#198441,.T.); +#198439 = VERTEX_POINT('',#198440); +#198440 = CARTESIAN_POINT('',(170.585714,-80.988882,1.585)); +#198441 = LINE('',#198442,#198443); +#198442 = CARTESIAN_POINT('',(170.692143,-80.988882,1.585)); +#198443 = VECTOR('',#198444,1.); +#198444 = DIRECTION('',(-1.,0.,0.)); +#198445 = ORIENTED_EDGE('',*,*,#198446,.T.); +#198446 = EDGE_CURVE('',#198439,#198447,#198449,.T.); +#198447 = VERTEX_POINT('',#198448); +#198448 = CARTESIAN_POINT('',(170.585714,-80.858882,1.585)); +#198449 = CIRCLE('',#198450,6.500000000092E-02); +#198450 = AXIS2_PLACEMENT_3D('',#198451,#198452,#198453); +#198451 = CARTESIAN_POINT('',(170.58571434486,-80.923882,1.585)); +#198452 = DIRECTION('',(0.,0.,-1.)); +#198453 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#198454 = ORIENTED_EDGE('',*,*,#198455,.T.); +#198455 = EDGE_CURVE('',#198447,#198456,#198458,.T.); +#198456 = VERTEX_POINT('',#198457); +#198457 = CARTESIAN_POINT('',(170.757143,-80.858882,1.585)); +#198458 = LINE('',#198459,#198460); +#198459 = CARTESIAN_POINT('',(170.585714,-80.858882,1.585)); +#198460 = VECTOR('',#198461,1.); +#198461 = DIRECTION('',(1.,0.,0.)); +#198462 = ORIENTED_EDGE('',*,*,#198463,.T.); +#198463 = EDGE_CURVE('',#198456,#198464,#198466,.T.); +#198464 = VERTEX_POINT('',#198465); +#198465 = CARTESIAN_POINT('',(170.822143,-80.923882,1.585)); +#198466 = CIRCLE('',#198467,6.500103935388E-02); +#198467 = AXIS2_PLACEMENT_3D('',#198468,#198469,#198470); +#198468 = CARTESIAN_POINT('',(170.75714196065,-80.92388303934,1.585)); +#198469 = DIRECTION('',(0.,0.,-1.)); +#198470 = DIRECTION('',(1.598967605495E-05,0.999999999872,0.)); +#198471 = ORIENTED_EDGE('',*,*,#198472,.T.); +#198472 = EDGE_CURVE('',#198464,#198473,#198475,.T.); +#198473 = VERTEX_POINT('',#198474); +#198474 = CARTESIAN_POINT('',(170.822143,-81.223882,1.585)); +#198475 = LINE('',#198476,#198477); +#198476 = CARTESIAN_POINT('',(170.822143,-80.923882,1.585)); +#198477 = VECTOR('',#198478,1.); +#198478 = DIRECTION('',(0.,-1.,0.)); +#198479 = ORIENTED_EDGE('',*,*,#198480,.T.); +#198480 = EDGE_CURVE('',#198473,#198481,#198483,.T.); +#198481 = VERTEX_POINT('',#198482); +#198482 = CARTESIAN_POINT('',(170.817195,-81.248756,1.585)); +#198483 = LINE('',#198484,#198485); +#198484 = CARTESIAN_POINT('',(170.822143,-81.223882,1.585)); +#198485 = VECTOR('',#198486,1.); +#198486 = DIRECTION('',(-0.195099947481,-0.98078336573,0.)); +#198487 = ORIENTED_EDGE('',*,*,#198488,.T.); +#198488 = EDGE_CURVE('',#198481,#198489,#198491,.T.); +#198489 = VERTEX_POINT('',#198490); +#198490 = CARTESIAN_POINT('',(170.803106,-81.269843,1.585)); +#198491 = LINE('',#198492,#198493); +#198492 = CARTESIAN_POINT('',(170.817195,-81.248756,1.585)); +#198493 = VECTOR('',#198494,1.); +#198494 = DIRECTION('',(-0.55554616352,-0.831485694524,0.)); +#198495 = ORIENTED_EDGE('',*,*,#198496,.T.); +#198496 = EDGE_CURVE('',#198489,#198497,#198499,.T.); +#198497 = VERTEX_POINT('',#198498); +#198498 = CARTESIAN_POINT('',(170.747819,-81.321005,1.585)); +#198499 = LINE('',#198500,#198501); +#198500 = CARTESIAN_POINT('',(170.803106,-81.269843,1.585)); +#198501 = VECTOR('',#198502,1.); +#198502 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#198503 = ORIENTED_EDGE('',*,*,#198504,.T.); +#198504 = EDGE_CURVE('',#198497,#198505,#198507,.T.); +#198505 = VERTEX_POINT('',#198506); +#198506 = CARTESIAN_POINT('',(170.337885,-81.320999,1.585)); +#198507 = CIRCLE('',#198508,0.409311833232); +#198508 = AXIS2_PLACEMENT_3D('',#198509,#198510,#198511); +#198509 = CARTESIAN_POINT('',(170.54285718563,-80.96670734057,1.585)); +#198510 = DIRECTION('',(-0.,0.,-1.)); +#198511 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#198512 = ORIENTED_EDGE('',*,*,#198513,.T.); +#198513 = EDGE_CURVE('',#198505,#198514,#198516,.T.); +#198514 = VERTEX_POINT('',#198515); +#198515 = CARTESIAN_POINT('',(170.233962,-81.218322,1.585)); +#198516 = LINE('',#198517,#198518); +#198517 = CARTESIAN_POINT('',(170.337885,-81.320999,1.585)); +#198518 = VECTOR('',#198519,1.); +#198519 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#198520 = ORIENTED_EDGE('',*,*,#198521,.T.); +#198521 = EDGE_CURVE('',#198514,#198522,#198524,.T.); +#198522 = VERTEX_POINT('',#198523); +#198523 = CARTESIAN_POINT('',(170.136941,-80.779546,1.585)); +#198524 = CIRCLE('',#198525,0.675436077441); +#198525 = AXIS2_PLACEMENT_3D('',#198526,#198527,#198528); +#198526 = CARTESIAN_POINT('',(170.80739758405,-80.86141091072,1.585)); +#198527 = DIRECTION('',(0.,0.,-1.)); +#198528 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#198529 = ORIENTED_EDGE('',*,*,#198530,.T.); +#198530 = EDGE_CURVE('',#198522,#198531,#198533,.T.); +#198531 = VERTEX_POINT('',#198532); +#198532 = CARTESIAN_POINT('',(170.184719,-80.594813,1.585)); +#198533 = LINE('',#198534,#198535); +#198534 = CARTESIAN_POINT('',(170.136941,-80.779546,1.585)); +#198535 = VECTOR('',#198536,1.); +#198536 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#198537 = ORIENTED_EDGE('',*,*,#198538,.T.); +#198538 = EDGE_CURVE('',#198531,#198539,#198541,.T.); +#198539 = VERTEX_POINT('',#198540); +#198540 = CARTESIAN_POINT('',(170.239752,-80.492206,1.585)); +#198541 = LINE('',#198542,#198543); +#198542 = CARTESIAN_POINT('',(170.184719,-80.594813,1.585)); +#198543 = VECTOR('',#198544,1.); +#198544 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#198545 = ORIENTED_EDGE('',*,*,#198546,.T.); +#198546 = EDGE_CURVE('',#198539,#198305,#198547,.T.); +#198547 = LINE('',#198548,#198549); +#198548 = CARTESIAN_POINT('',(170.239752,-80.492206,1.585)); +#198549 = VECTOR('',#198550,1.); +#198550 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#198551 = PLANE('',#198552); +#198552 = AXIS2_PLACEMENT_3D('',#198553,#198554,#198555); +#198553 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198554 = DIRECTION('',(0.,0.,1.)); +#198555 = DIRECTION('',(1.,0.,-0.)); +#198556 = SHELL_BASED_SURFACE_MODEL('',(#198557)); +#198557 = OPEN_SHELL('',(#198558)); +#198558 = ADVANCED_FACE('',(#198559),#198653,.T.); +#198559 = FACE_BOUND('',#198560,.F.); +#198560 = EDGE_LOOP('',(#198561,#198572,#198580,#198588,#198597,#198605, + #198613,#198622,#198630,#198639,#198647)); +#198561 = ORIENTED_EDGE('',*,*,#198562,.T.); +#198562 = EDGE_CURVE('',#198563,#198565,#198567,.T.); +#198563 = VERTEX_POINT('',#198564); +#198564 = CARTESIAN_POINT('',(82.683526,-79.673309,1.585)); +#198565 = VERTEX_POINT('',#198566); +#198566 = CARTESIAN_POINT('',(82.683526,-79.379073,1.585)); +#198567 = CIRCLE('',#198568,0.150000292066); +#198568 = AXIS2_PLACEMENT_3D('',#198569,#198570,#198571); +#198569 = CARTESIAN_POINT('',(82.71279,-79.526191,1.585)); +#198570 = DIRECTION('',(0.,0.,-1.)); +#198571 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#198572 = ORIENTED_EDGE('',*,*,#198573,.T.); +#198573 = EDGE_CURVE('',#198565,#198574,#198576,.T.); +#198574 = VERTEX_POINT('',#198575); +#198575 = CARTESIAN_POINT('',(85.320316,-79.376932,1.585)); +#198576 = LINE('',#198577,#198578); +#198577 = CARTESIAN_POINT('',(82.683526,-79.379073,1.585)); +#198578 = VECTOR('',#198579,1.); +#198579 = DIRECTION('',(0.999999670351,8.1197186512E-04,0.)); +#198580 = ORIENTED_EDGE('',*,*,#198581,.T.); +#198581 = EDGE_CURVE('',#198574,#198582,#198584,.T.); +#198582 = VERTEX_POINT('',#198583); +#198583 = CARTESIAN_POINT('',(85.342054,-79.379073,1.585)); +#198584 = LINE('',#198585,#198586); +#198585 = CARTESIAN_POINT('',(85.320316,-79.376932,1.585)); +#198586 = VECTOR('',#198587,1.); +#198587 = DIRECTION('',(0.99518475403,-9.801686256264E-02,0.)); +#198588 = ORIENTED_EDGE('',*,*,#198589,.T.); +#198589 = EDGE_CURVE('',#198582,#198590,#198592,.T.); +#198590 = VERTEX_POINT('',#198591); +#198591 = CARTESIAN_POINT('',(85.396126,-79.650911,1.585)); +#198592 = CIRCLE('',#198593,0.149999967208); +#198593 = AXIS2_PLACEMENT_3D('',#198594,#198595,#198596); +#198594 = CARTESIAN_POINT('',(85.312790276269,-79.52619072373,1.585)); +#198595 = DIRECTION('',(0.,0.,-1.)); +#198596 = DIRECTION('',(0.195091534189,0.980785039286,0.)); +#198597 = ORIENTED_EDGE('',*,*,#198598,.T.); +#198598 = EDGE_CURVE('',#198590,#198599,#198601,.T.); +#198599 = VERTEX_POINT('',#198600); +#198600 = CARTESIAN_POINT('',(83.277624,-80.861905,1.585)); +#198601 = LINE('',#198602,#198603); +#198602 = CARTESIAN_POINT('',(85.396126,-79.650911,1.585)); +#198603 = VECTOR('',#198604,1.); +#198604 = DIRECTION('',(-0.868168737335,-0.496269124079,0.)); +#198605 = ORIENTED_EDGE('',*,*,#198606,.T.); +#198606 = EDGE_CURVE('',#198599,#198607,#198609,.T.); +#198607 = VERTEX_POINT('',#198608); +#198608 = CARTESIAN_POINT('',(85.342054,-80.864787,1.585)); +#198609 = LINE('',#198610,#198611); +#198610 = CARTESIAN_POINT('',(83.277624,-80.861905,1.585)); +#198611 = VECTOR('',#198612,1.); +#198612 = DIRECTION('',(0.999999025556,-1.396025630157E-03,0.)); +#198613 = ORIENTED_EDGE('',*,*,#198614,.T.); +#198614 = EDGE_CURVE('',#198607,#198615,#198617,.T.); +#198615 = VERTEX_POINT('',#198616); +#198616 = CARTESIAN_POINT('',(85.342054,-81.159023,1.585)); +#198617 = CIRCLE('',#198618,0.150000292066); +#198618 = AXIS2_PLACEMENT_3D('',#198619,#198620,#198621); +#198619 = CARTESIAN_POINT('',(85.31279,-81.011905,1.585)); +#198620 = DIRECTION('',(0.,0.,-1.)); +#198621 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#198622 = ORIENTED_EDGE('',*,*,#198623,.T.); +#198623 = EDGE_CURVE('',#198615,#198624,#198626,.T.); +#198624 = VERTEX_POINT('',#198625); +#198625 = CARTESIAN_POINT('',(82.683526,-81.159023,1.585)); +#198626 = LINE('',#198627,#198628); +#198627 = CARTESIAN_POINT('',(85.342054,-81.159023,1.585)); +#198628 = VECTOR('',#198629,1.); +#198629 = DIRECTION('',(-1.,0.,0.)); +#198630 = ORIENTED_EDGE('',*,*,#198631,.T.); +#198631 = EDGE_CURVE('',#198624,#198632,#198634,.T.); +#198632 = VERTEX_POINT('',#198633); +#198633 = CARTESIAN_POINT('',(82.629454,-80.887185,1.585)); +#198634 = CIRCLE('',#198635,0.149999967208); +#198635 = AXIS2_PLACEMENT_3D('',#198636,#198637,#198638); +#198636 = CARTESIAN_POINT('',(82.712789723731,-81.01190527626,1.585)); +#198637 = DIRECTION('',(0.,0.,-1.)); +#198638 = DIRECTION('',(-0.19509153419,-0.980785039286,-0.)); +#198639 = ORIENTED_EDGE('',*,*,#198640,.T.); +#198640 = EDGE_CURVE('',#198632,#198641,#198643,.T.); +#198641 = VERTEX_POINT('',#198642); +#198642 = CARTESIAN_POINT('',(84.747954,-79.676191,1.585)); +#198643 = LINE('',#198644,#198645); +#198644 = CARTESIAN_POINT('',(82.629454,-80.887185,1.585)); +#198645 = VECTOR('',#198646,1.); +#198646 = DIRECTION('',(0.86816853548,0.496269477203,0.)); +#198647 = ORIENTED_EDGE('',*,*,#198648,.T.); +#198648 = EDGE_CURVE('',#198641,#198563,#198649,.T.); +#198649 = LINE('',#198650,#198651); +#198650 = CARTESIAN_POINT('',(84.747954,-79.676191,1.585)); +#198651 = VECTOR('',#198652,1.); +#198652 = DIRECTION('',(-0.999999025554,1.396026982605E-03,0.)); +#198653 = PLANE('',#198654); +#198654 = AXIS2_PLACEMENT_3D('',#198655,#198656,#198657); +#198655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198656 = DIRECTION('',(0.,0.,1.)); +#198657 = DIRECTION('',(1.,0.,-0.)); +#198658 = SHELL_BASED_SURFACE_MODEL('',(#198659)); +#198659 = OPEN_SHELL('',(#198660)); +#198660 = ADVANCED_FACE('',(#198661),#198772,.T.); +#198661 = FACE_BOUND('',#198662,.F.); +#198662 = EDGE_LOOP('',(#198663,#198674,#198682,#198691,#198699,#198707, + #198716,#198724,#198732,#198741,#198749,#198758,#198766)); +#198663 = ORIENTED_EDGE('',*,*,#198664,.T.); +#198664 = EDGE_CURVE('',#198665,#198667,#198669,.T.); +#198665 = VERTEX_POINT('',#198666); +#198666 = CARTESIAN_POINT('',(185.00533,-79.799883,1.585)); +#198667 = VERTEX_POINT('',#198668); +#198668 = CARTESIAN_POINT('',(185.056297,-79.602583,1.585)); +#198669 = CIRCLE('',#198670,0.109622033244); +#198670 = AXIS2_PLACEMENT_3D('',#198671,#198672,#198673); +#198671 = CARTESIAN_POINT('',(185.06997256399,-79.7113486615,1.585)); +#198672 = DIRECTION('',(0.,0.,-1.)); +#198673 = DIRECTION('',(-0.589685869507,-0.807632698263,-0.)); +#198674 = ORIENTED_EDGE('',*,*,#198675,.T.); +#198675 = EDGE_CURVE('',#198667,#198676,#198678,.T.); +#198676 = VERTEX_POINT('',#198677); +#198677 = CARTESIAN_POINT('',(186.69186,-79.603308,1.585)); +#198678 = LINE('',#198679,#198680); +#198679 = CARTESIAN_POINT('',(185.056297,-79.602583,1.585)); +#198680 = VECTOR('',#198681,1.); +#198681 = DIRECTION('',(0.999999901755,-4.432723953617E-04,0.)); +#198682 = ORIENTED_EDGE('',*,*,#198683,.T.); +#198683 = EDGE_CURVE('',#198676,#198684,#198686,.T.); +#198684 = VERTEX_POINT('',#198685); +#198685 = CARTESIAN_POINT('',(186.69186,-79.81908,1.585)); +#198686 = CIRCLE('',#198687,0.109999639072); +#198687 = AXIS2_PLACEMENT_3D('',#198688,#198689,#198690); +#198688 = CARTESIAN_POINT('',(186.6704,-79.711194,1.585)); +#198689 = DIRECTION('',(0.,0.,-1.)); +#198690 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#198691 = ORIENTED_EDGE('',*,*,#198692,.T.); +#198692 = EDGE_CURVE('',#198684,#198693,#198695,.T.); +#198693 = VERTEX_POINT('',#198694); +#198694 = CARTESIAN_POINT('',(185.566231,-79.821194,1.585)); +#198695 = LINE('',#198696,#198697); +#198696 = CARTESIAN_POINT('',(186.69186,-79.81908,1.585)); +#198697 = VECTOR('',#198698,1.); +#198698 = DIRECTION('',(-0.999998236448,-1.878057754248E-03,0.)); +#198699 = ORIENTED_EDGE('',*,*,#198700,.T.); +#198700 = EDGE_CURVE('',#198693,#198701,#198703,.T.); +#198701 = VERTEX_POINT('',#198702); +#198702 = CARTESIAN_POINT('',(186.278327,-80.155839,1.585)); +#198703 = LINE('',#198704,#198705); +#198704 = CARTESIAN_POINT('',(185.566231,-79.821194,1.585)); +#198705 = VECTOR('',#198706,1.); +#198706 = DIRECTION('',(0.905043330299,-0.425319374449,0.)); +#198707 = ORIENTED_EDGE('',*,*,#198708,.T.); +#198708 = EDGE_CURVE('',#198701,#198709,#198711,.T.); +#198709 = VERTEX_POINT('',#198710); +#198710 = CARTESIAN_POINT('',(186.267628,-80.339555,1.585)); +#198711 = CIRCLE('',#198712,0.109495944293); +#198712 = AXIS2_PLACEMENT_3D('',#198713,#198714,#198715); +#198713 = CARTESIAN_POINT('',(186.21372427126,-80.24424629187,1.585)); +#198714 = DIRECTION('',(0.,0.,-1.)); +#198715 = DIRECTION('',(0.590001110588,0.807402433428,0.)); +#198716 = ORIENTED_EDGE('',*,*,#198717,.T.); +#198717 = EDGE_CURVE('',#198709,#198718,#198720,.T.); +#198718 = VERTEX_POINT('',#198719); +#198719 = CARTESIAN_POINT('',(185.566232,-80.667861,1.585)); +#198720 = LINE('',#198721,#198722); +#198721 = CARTESIAN_POINT('',(186.267628,-80.339555,1.585)); +#198722 = VECTOR('',#198723,1.); +#198723 = DIRECTION('',(-0.905693707643,-0.423932669107,0.)); +#198724 = ORIENTED_EDGE('',*,*,#198725,.T.); +#198725 = EDGE_CURVE('',#198718,#198726,#198728,.T.); +#198726 = VERTEX_POINT('',#198727); +#198727 = CARTESIAN_POINT('',(186.69186,-80.669975,1.585)); +#198728 = LINE('',#198729,#198730); +#198729 = CARTESIAN_POINT('',(185.566232,-80.667861,1.585)); +#198730 = VECTOR('',#198731,1.); +#198731 = DIRECTION('',(0.999998236445,-1.878059422683E-03,0.)); +#198732 = ORIENTED_EDGE('',*,*,#198733,.T.); +#198733 = EDGE_CURVE('',#198726,#198734,#198736,.T.); +#198734 = VERTEX_POINT('',#198735); +#198735 = CARTESIAN_POINT('',(186.69186,-80.885747,1.585)); +#198736 = CIRCLE('',#198737,0.109999639072); +#198737 = AXIS2_PLACEMENT_3D('',#198738,#198739,#198740); +#198738 = CARTESIAN_POINT('',(186.6704,-80.777861,1.585)); +#198739 = DIRECTION('',(0.,0.,-1.)); +#198740 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#198741 = ORIENTED_EDGE('',*,*,#198742,.T.); +#198742 = EDGE_CURVE('',#198734,#198743,#198745,.T.); +#198743 = VERTEX_POINT('',#198744); +#198744 = CARTESIAN_POINT('',(185.04894,-80.885747,1.585)); +#198745 = LINE('',#198746,#198747); +#198746 = CARTESIAN_POINT('',(186.69186,-80.885747,1.585)); +#198747 = VECTOR('',#198748,1.); +#198748 = DIRECTION('',(-1.,0.,0.)); +#198749 = ORIENTED_EDGE('',*,*,#198750,.T.); +#198750 = EDGE_CURVE('',#198743,#198751,#198753,.T.); +#198751 = VERTEX_POINT('',#198752); +#198752 = CARTESIAN_POINT('',(185.011693,-80.685402,1.585)); +#198753 = CIRCLE('',#198754,0.109622353499); +#198754 = AXIS2_PLACEMENT_3D('',#198755,#198756,#198757); +#198755 = CARTESIAN_POINT('',(185.07007889837,-80.77818210162,1.585)); +#198756 = DIRECTION('',(0.,0.,-1.)); +#198757 = DIRECTION('',(-0.192833830868,-0.981231427173,-0.)); +#198758 = ORIENTED_EDGE('',*,*,#198759,.T.); +#198759 = EDGE_CURVE('',#198751,#198760,#198762,.T.); +#198760 = VERTEX_POINT('',#198761); +#198761 = CARTESIAN_POINT('',(185.95314,-80.244527,1.585)); +#198762 = LINE('',#198763,#198764); +#198763 = CARTESIAN_POINT('',(185.011693,-80.685402,1.585)); +#198764 = VECTOR('',#198765,1.); +#198765 = DIRECTION('',(0.905617200567,0.424096081139,0.)); +#198766 = ORIENTED_EDGE('',*,*,#198767,.T.); +#198767 = EDGE_CURVE('',#198760,#198665,#198768,.T.); +#198768 = LINE('',#198769,#198770); +#198769 = CARTESIAN_POINT('',(185.95314,-80.244527,1.585)); +#198770 = VECTOR('',#198771,1.); +#198771 = DIRECTION('',(-0.905327454208,0.424714257656,0.)); +#198772 = PLANE('',#198773); +#198773 = AXIS2_PLACEMENT_3D('',#198774,#198775,#198776); +#198774 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198775 = DIRECTION('',(0.,0.,1.)); +#198776 = DIRECTION('',(1.,0.,-0.)); +#198777 = SHELL_BASED_SURFACE_MODEL('',(#198778)); +#198778 = OPEN_SHELL('',(#198779)); +#198779 = ADVANCED_FACE('',(#198780),#199021,.T.); +#198780 = FACE_BOUND('',#198781,.F.); +#198781 = EDGE_LOOP('',(#198782,#198793,#198801,#198809,#198817,#198825, + #198834,#198842,#198851,#198859,#198867,#198875,#198883,#198891, + #198899,#198908,#198916,#198924,#198932,#198940,#198949,#198957, + #198965,#198973,#198982,#198990,#198998,#199006,#199015)); +#198782 = ORIENTED_EDGE('',*,*,#198783,.T.); +#198783 = EDGE_CURVE('',#198784,#198786,#198788,.T.); +#198784 = VERTEX_POINT('',#198785); +#198785 = CARTESIAN_POINT('',(113.688882,-79.792856,1.585)); +#198786 = VERTEX_POINT('',#198787); +#198787 = CARTESIAN_POINT('',(113.753882,-79.727856,1.585)); +#198788 = CIRCLE('',#198789,6.500103935389E-02); +#198789 = AXIS2_PLACEMENT_3D('',#198790,#198791,#198792); +#198790 = CARTESIAN_POINT('',(113.75388303934,-79.79285703934,1.585)); +#198791 = DIRECTION('',(0.,0.,-1.)); +#198792 = DIRECTION('',(-0.999999999872,1.598967627357E-05,0.)); +#198793 = ORIENTED_EDGE('',*,*,#198794,.T.); +#198794 = EDGE_CURVE('',#198786,#198795,#198797,.T.); +#198795 = VERTEX_POINT('',#198796); +#198796 = CARTESIAN_POINT('',(114.053882,-79.727856,1.585)); +#198797 = LINE('',#198798,#198799); +#198798 = CARTESIAN_POINT('',(113.753882,-79.727856,1.585)); +#198799 = VECTOR('',#198800,1.); +#198800 = DIRECTION('',(1.,0.,0.)); +#198801 = ORIENTED_EDGE('',*,*,#198802,.T.); +#198802 = EDGE_CURVE('',#198795,#198803,#198805,.T.); +#198803 = VERTEX_POINT('',#198804); +#198804 = CARTESIAN_POINT('',(114.078756,-79.732804,1.585)); +#198805 = LINE('',#198806,#198807); +#198806 = CARTESIAN_POINT('',(114.053882,-79.727856,1.585)); +#198807 = VECTOR('',#198808,1.); +#198808 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#198809 = ORIENTED_EDGE('',*,*,#198810,.T.); +#198810 = EDGE_CURVE('',#198803,#198811,#198813,.T.); +#198811 = VERTEX_POINT('',#198812); +#198812 = CARTESIAN_POINT('',(114.099843,-79.746894,1.585)); +#198813 = LINE('',#198814,#198815); +#198814 = CARTESIAN_POINT('',(114.078756,-79.732804,1.585)); +#198815 = VECTOR('',#198816,1.); +#198816 = DIRECTION('',(0.831467480074,-0.555573424111,0.)); +#198817 = ORIENTED_EDGE('',*,*,#198818,.T.); +#198818 = EDGE_CURVE('',#198811,#198819,#198821,.T.); +#198819 = VERTEX_POINT('',#198820); +#198820 = CARTESIAN_POINT('',(114.151003,-79.802175,1.585)); +#198821 = LINE('',#198822,#198823); +#198822 = CARTESIAN_POINT('',(114.099843,-79.746894,1.585)); +#198823 = VECTOR('',#198824,1.); +#198824 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#198825 = ORIENTED_EDGE('',*,*,#198826,.T.); +#198826 = EDGE_CURVE('',#198819,#198827,#198829,.T.); +#198827 = VERTEX_POINT('',#198828); +#198828 = CARTESIAN_POINT('',(114.150999,-80.212113,1.585)); +#198829 = CIRCLE('',#198830,0.409312568567); +#198830 = AXIS2_PLACEMENT_3D('',#198831,#198832,#198833); +#198831 = CARTESIAN_POINT('',(113.79670664807,-80.00714054294,1.585)); +#198832 = DIRECTION('',(0.,0.,-1.)); +#198833 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#198834 = ORIENTED_EDGE('',*,*,#198835,.T.); +#198835 = EDGE_CURVE('',#198827,#198836,#198838,.T.); +#198836 = VERTEX_POINT('',#198837); +#198837 = CARTESIAN_POINT('',(114.048322,-80.316036,1.585)); +#198838 = LINE('',#198839,#198840); +#198839 = CARTESIAN_POINT('',(114.150999,-80.212113,1.585)); +#198840 = VECTOR('',#198841,1.); +#198841 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#198842 = ORIENTED_EDGE('',*,*,#198843,.T.); +#198843 = EDGE_CURVE('',#198836,#198844,#198846,.T.); +#198844 = VERTEX_POINT('',#198845); +#198845 = CARTESIAN_POINT('',(113.609546,-80.413058,1.585)); +#198846 = CIRCLE('',#198847,0.675422176574); +#198847 = AXIS2_PLACEMENT_3D('',#198848,#198849,#198850); +#198848 = CARTESIAN_POINT('',(113.69141275007,-79.74261564465,1.585)); +#198849 = DIRECTION('',(0.,0.,-1.)); +#198850 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#198851 = ORIENTED_EDGE('',*,*,#198852,.T.); +#198852 = EDGE_CURVE('',#198844,#198853,#198855,.T.); +#198853 = VERTEX_POINT('',#198854); +#198854 = CARTESIAN_POINT('',(113.424813,-80.36528,1.585)); +#198855 = LINE('',#198856,#198857); +#198856 = CARTESIAN_POINT('',(113.609546,-80.413058,1.585)); +#198857 = VECTOR('',#198858,1.); +#198858 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#198859 = ORIENTED_EDGE('',*,*,#198860,.T.); +#198860 = EDGE_CURVE('',#198853,#198861,#198863,.T.); +#198861 = VERTEX_POINT('',#198862); +#198862 = CARTESIAN_POINT('',(113.322206,-80.310247,1.585)); +#198863 = LINE('',#198864,#198865); +#198864 = CARTESIAN_POINT('',(113.424813,-80.36528,1.585)); +#198865 = VECTOR('',#198866,1.); +#198866 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#198867 = ORIENTED_EDGE('',*,*,#198868,.T.); +#198868 = EDGE_CURVE('',#198861,#198869,#198871,.T.); +#198869 = VERTEX_POINT('',#198870); +#198870 = CARTESIAN_POINT('',(113.228191,-80.212109,1.585)); +#198871 = LINE('',#198872,#198873); +#198872 = CARTESIAN_POINT('',(113.322206,-80.310247,1.585)); +#198873 = VECTOR('',#198874,1.); +#198874 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#198875 = ORIENTED_EDGE('',*,*,#198876,.T.); +#198876 = EDGE_CURVE('',#198869,#198877,#198879,.T.); +#198877 = VERTEX_POINT('',#198878); +#198878 = CARTESIAN_POINT('',(113.17663,-80.060221,1.585)); +#198879 = LINE('',#198880,#198881); +#198880 = CARTESIAN_POINT('',(113.228191,-80.212109,1.585)); +#198881 = VECTOR('',#198882,1.); +#198882 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#198883 = ORIENTED_EDGE('',*,*,#198884,.T.); +#198884 = EDGE_CURVE('',#198877,#198885,#198887,.T.); +#198885 = VERTEX_POINT('',#198886); +#198886 = CARTESIAN_POINT('',(113.177512,-79.906771,1.585)); +#198887 = LINE('',#198888,#198889); +#198888 = CARTESIAN_POINT('',(113.17663,-80.060221,1.585)); +#198889 = VECTOR('',#198890,1.); +#198890 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#198891 = ORIENTED_EDGE('',*,*,#198892,.T.); +#198892 = EDGE_CURVE('',#198885,#198893,#198895,.T.); +#198893 = VERTEX_POINT('',#198894); +#198894 = CARTESIAN_POINT('',(113.224316,-79.806644,1.585)); +#198895 = LINE('',#198896,#198897); +#198896 = CARTESIAN_POINT('',(113.177512,-79.906771,1.585)); +#198897 = VECTOR('',#198898,1.); +#198898 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#198899 = ORIENTED_EDGE('',*,*,#198900,.T.); +#198900 = EDGE_CURVE('',#198893,#198901,#198903,.T.); +#198901 = VERTEX_POINT('',#198902); +#198902 = CARTESIAN_POINT('',(113.340592,-79.864782,1.585)); +#198903 = CIRCLE('',#198904,6.500026004258E-02); +#198904 = AXIS2_PLACEMENT_3D('',#198905,#198906,#198907); +#198905 = CARTESIAN_POINT('',(113.28245365279,-79.8357136944,1.585)); +#198906 = DIRECTION('',(0.,0.,-1.)); +#198907 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#198908 = ORIENTED_EDGE('',*,*,#198909,.T.); +#198909 = EDGE_CURVE('',#198901,#198910,#198912,.T.); +#198910 = VERTEX_POINT('',#198911); +#198911 = CARTESIAN_POINT('',(113.304597,-79.936772,1.585)); +#198912 = LINE('',#198913,#198914); +#198913 = CARTESIAN_POINT('',(113.340592,-79.864782,1.585)); +#198914 = VECTOR('',#198915,1.); +#198915 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#198916 = ORIENTED_EDGE('',*,*,#198917,.T.); +#198917 = EDGE_CURVE('',#198910,#198918,#198920,.T.); +#198918 = VERTEX_POINT('',#198919); +#198919 = CARTESIAN_POINT('',(113.304597,-80.039452,1.585)); +#198920 = LINE('',#198921,#198922); +#198921 = CARTESIAN_POINT('',(113.304597,-79.936772,1.585)); +#198922 = VECTOR('',#198923,1.); +#198923 = DIRECTION('',(0.,-1.,0.)); +#198924 = ORIENTED_EDGE('',*,*,#198925,.T.); +#198925 = EDGE_CURVE('',#198918,#198926,#198928,.T.); +#198926 = VERTEX_POINT('',#198927); +#198927 = CARTESIAN_POINT('',(113.339265,-80.143457,1.585)); +#198928 = LINE('',#198929,#198930); +#198929 = CARTESIAN_POINT('',(113.304597,-80.039452,1.585)); +#198930 = VECTOR('',#198931,1.); +#198931 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#198932 = ORIENTED_EDGE('',*,*,#198933,.T.); +#198933 = EDGE_CURVE('',#198926,#198934,#198936,.T.); +#198934 = VERTEX_POINT('',#198935); +#198935 = CARTESIAN_POINT('',(113.406669,-80.210863,1.585)); +#198936 = LINE('',#198937,#198938); +#198937 = CARTESIAN_POINT('',(113.339265,-80.143457,1.585)); +#198938 = VECTOR('',#198939,1.); +#198939 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#198940 = ORIENTED_EDGE('',*,*,#198941,.T.); +#198941 = EDGE_CURVE('',#198934,#198942,#198944,.T.); +#198942 = VERTEX_POINT('',#198943); +#198943 = CARTESIAN_POINT('',(113.745881,-80.284999,1.585)); +#198944 = CIRCLE('',#198945,0.553317785495); +#198945 = AXIS2_PLACEMENT_3D('',#198946,#198947,#198948); +#198946 = CARTESIAN_POINT('',(113.6884500839,-79.73466976979,1.585)); +#198947 = DIRECTION('',(0.,0.,1.)); +#198948 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#198949 = ORIENTED_EDGE('',*,*,#198950,.T.); +#198950 = EDGE_CURVE('',#198942,#198951,#198953,.T.); +#198951 = VERTEX_POINT('',#198952); +#198952 = CARTESIAN_POINT('',(113.902622,-80.245813,1.585)); +#198953 = LINE('',#198954,#198955); +#198954 = CARTESIAN_POINT('',(113.745881,-80.284999,1.585)); +#198955 = VECTOR('',#198956,1.); +#198956 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#198957 = ORIENTED_EDGE('',*,*,#198958,.T.); +#198958 = EDGE_CURVE('',#198951,#198959,#198961,.T.); +#198959 = VERTEX_POINT('',#198960); +#198960 = CARTESIAN_POINT('',(113.972522,-80.210864,1.585)); +#198961 = LINE('',#198962,#198963); +#198962 = CARTESIAN_POINT('',(113.902622,-80.245813,1.585)); +#198963 = VECTOR('',#198964,1.); +#198964 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#198965 = ORIENTED_EDGE('',*,*,#198966,.T.); +#198966 = EDGE_CURVE('',#198959,#198967,#198969,.T.); +#198967 = VERTEX_POINT('',#198968); +#198968 = CARTESIAN_POINT('',(114.039928,-80.143457,1.585)); +#198969 = LINE('',#198970,#198971); +#198970 = CARTESIAN_POINT('',(113.972522,-80.210864,1.585)); +#198971 = VECTOR('',#198972,1.); +#198972 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#198973 = ORIENTED_EDGE('',*,*,#198974,.T.); +#198974 = EDGE_CURVE('',#198967,#198975,#198977,.T.); +#198975 = VERTEX_POINT('',#198976); +#198976 = CARTESIAN_POINT('',(114.039928,-79.870825,1.585)); +#198977 = CIRCLE('',#198978,0.272194686174); +#198978 = AXIS2_PLACEMENT_3D('',#198979,#198980,#198981); +#198979 = CARTESIAN_POINT('',(113.80432686391,-80.007141,1.585)); +#198980 = DIRECTION('',(0.,-0.,1.)); +#198981 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#198982 = ORIENTED_EDGE('',*,*,#198983,.T.); +#198983 = EDGE_CURVE('',#198975,#198984,#198986,.T.); +#198984 = VERTEX_POINT('',#198985); +#198985 = CARTESIAN_POINT('',(114.026959,-79.857856,1.585)); +#198986 = LINE('',#198987,#198988); +#198987 = CARTESIAN_POINT('',(114.039928,-79.870825,1.585)); +#198988 = VECTOR('',#198989,1.); +#198989 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#198990 = ORIENTED_EDGE('',*,*,#198991,.T.); +#198991 = EDGE_CURVE('',#198984,#198992,#198994,.T.); +#198992 = VERTEX_POINT('',#198993); +#198993 = CARTESIAN_POINT('',(113.818882,-79.857856,1.585)); +#198994 = LINE('',#198995,#198996); +#198995 = CARTESIAN_POINT('',(114.026959,-79.857856,1.585)); +#198996 = VECTOR('',#198997,1.); +#198997 = DIRECTION('',(-1.,0.,0.)); +#198998 = ORIENTED_EDGE('',*,*,#198999,.T.); +#198999 = EDGE_CURVE('',#198992,#199000,#199002,.T.); +#199000 = VERTEX_POINT('',#199001); +#199001 = CARTESIAN_POINT('',(113.818882,-79.964285,1.585)); +#199002 = LINE('',#199003,#199004); +#199003 = CARTESIAN_POINT('',(113.818882,-79.857856,1.585)); +#199004 = VECTOR('',#199005,1.); +#199005 = DIRECTION('',(0.,-1.,0.)); +#199006 = ORIENTED_EDGE('',*,*,#199007,.T.); +#199007 = EDGE_CURVE('',#199000,#199008,#199010,.T.); +#199008 = VERTEX_POINT('',#199009); +#199009 = CARTESIAN_POINT('',(113.688882,-79.964285,1.585)); +#199010 = CIRCLE('',#199011,6.500000000091E-02); +#199011 = AXIS2_PLACEMENT_3D('',#199012,#199013,#199014); +#199012 = CARTESIAN_POINT('',(113.753882,-79.96428465513,1.585)); +#199013 = DIRECTION('',(-0.,0.,-1.)); +#199014 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#199015 = ORIENTED_EDGE('',*,*,#199016,.T.); +#199016 = EDGE_CURVE('',#199008,#198784,#199017,.T.); +#199017 = LINE('',#199018,#199019); +#199018 = CARTESIAN_POINT('',(113.688882,-79.964285,1.585)); +#199019 = VECTOR('',#199020,1.); +#199020 = DIRECTION('',(0.,1.,0.)); +#199021 = PLANE('',#199022); +#199022 = AXIS2_PLACEMENT_3D('',#199023,#199024,#199025); +#199023 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199024 = DIRECTION('',(0.,0.,1.)); +#199025 = DIRECTION('',(1.,0.,-0.)); +#199026 = SHELL_BASED_SURFACE_MODEL('',(#199027)); +#199027 = OPEN_SHELL('',(#199028)); +#199028 = ADVANCED_FACE('',(#199029,#199114),#199173,.T.); +#199029 = FACE_BOUND('',#199030,.F.); +#199030 = EDGE_LOOP('',(#199031,#199042,#199050,#199058,#199066,#199075, + #199083,#199092,#199100,#199108)); +#199031 = ORIENTED_EDGE('',*,*,#199032,.T.); +#199032 = EDGE_CURVE('',#199033,#199035,#199037,.T.); +#199033 = VERTEX_POINT('',#199034); +#199034 = CARTESIAN_POINT('',(206.126866,-79.450458,1.585)); +#199035 = VERTEX_POINT('',#199036); +#199036 = CARTESIAN_POINT('',(206.610776,-79.521354,1.585)); +#199037 = CIRCLE('',#199038,0.34461174713); +#199038 = AXIS2_PLACEMENT_3D('',#199039,#199040,#199041); +#199039 = CARTESIAN_POINT('',(206.33362294377,-79.72615497579,1.585)); +#199040 = DIRECTION('',(0.,0.,-1.)); +#199041 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#199042 = ORIENTED_EDGE('',*,*,#199043,.T.); +#199043 = EDGE_CURVE('',#199035,#199044,#199046,.T.); +#199044 = VERTEX_POINT('',#199045); +#199045 = CARTESIAN_POINT('',(206.668837,-79.641801,1.585)); +#199046 = LINE('',#199047,#199048); +#199047 = CARTESIAN_POINT('',(206.610776,-79.521354,1.585)); +#199048 = VECTOR('',#199049,1.); +#199049 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#199050 = ORIENTED_EDGE('',*,*,#199051,.T.); +#199051 = EDGE_CURVE('',#199044,#199052,#199054,.T.); +#199052 = VERTEX_POINT('',#199053); +#199053 = CARTESIAN_POINT('',(206.670278,-79.962385,1.585)); +#199054 = LINE('',#199055,#199056); +#199055 = CARTESIAN_POINT('',(206.668837,-79.641801,1.585)); +#199056 = VECTOR('',#199057,1.); +#199057 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#199058 = ORIENTED_EDGE('',*,*,#199059,.T.); +#199059 = EDGE_CURVE('',#199052,#199060,#199062,.T.); +#199060 = VERTEX_POINT('',#199061); +#199061 = CARTESIAN_POINT('',(207.086101,-79.963826,1.585)); +#199062 = LINE('',#199063,#199064); +#199063 = CARTESIAN_POINT('',(206.670278,-79.962385,1.585)); +#199064 = VECTOR('',#199065,1.); +#199065 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#199066 = ORIENTED_EDGE('',*,*,#199067,.T.); +#199067 = EDGE_CURVE('',#199060,#199068,#199070,.T.); +#199068 = VERTEX_POINT('',#199069); +#199069 = CARTESIAN_POINT('',(207.071469,-80.112385,1.585)); +#199070 = CIRCLE('',#199071,7.500006711464E-02); +#199071 = AXIS2_PLACEMENT_3D('',#199072,#199073,#199074); +#199072 = CARTESIAN_POINT('',(207.07146906711,-80.03738493288,1.585)); +#199073 = DIRECTION('',(0.,0.,-1.)); +#199074 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#199075 = ORIENTED_EDGE('',*,*,#199076,.T.); +#199076 = EDGE_CURVE('',#199068,#199077,#199079,.T.); +#199077 = VERTEX_POINT('',#199078); +#199078 = CARTESIAN_POINT('',(206.056837,-80.110944,1.585)); +#199079 = LINE('',#199080,#199081); +#199080 = CARTESIAN_POINT('',(207.071469,-80.112385,1.585)); +#199081 = VECTOR('',#199082,1.); +#199082 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#199083 = ORIENTED_EDGE('',*,*,#199084,.T.); +#199084 = EDGE_CURVE('',#199077,#199085,#199087,.T.); +#199085 = VERTEX_POINT('',#199086); +#199086 = CARTESIAN_POINT('',(205.996469,-80.037385,1.585)); +#199087 = CIRCLE('',#199088,7.500074938986E-02); +#199088 = AXIS2_PLACEMENT_3D('',#199089,#199090,#199091); +#199089 = CARTESIAN_POINT('',(206.07146974938,-80.03738453389,1.585)); +#199090 = DIRECTION('',(0.,0.,-1.)); +#199091 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#199092 = ORIENTED_EDGE('',*,*,#199093,.T.); +#199093 = EDGE_CURVE('',#199085,#199094,#199096,.T.); +#199094 = VERTEX_POINT('',#199095); +#199095 = CARTESIAN_POINT('',(205.999132,-79.636624,1.585)); +#199096 = LINE('',#199097,#199098); +#199097 = CARTESIAN_POINT('',(205.996469,-80.037385,1.585)); +#199098 = VECTOR('',#199099,1.); +#199099 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#199100 = ORIENTED_EDGE('',*,*,#199101,.T.); +#199101 = EDGE_CURVE('',#199094,#199102,#199104,.T.); +#199102 = VERTEX_POINT('',#199103); +#199103 = CARTESIAN_POINT('',(206.061336,-79.513911,1.585)); +#199104 = LINE('',#199105,#199106); +#199105 = CARTESIAN_POINT('',(205.999132,-79.636624,1.585)); +#199106 = VECTOR('',#199107,1.); +#199107 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#199108 = ORIENTED_EDGE('',*,*,#199109,.T.); +#199109 = EDGE_CURVE('',#199102,#199033,#199110,.T.); +#199110 = LINE('',#199111,#199112); +#199111 = CARTESIAN_POINT('',(206.061336,-79.513911,1.585)); +#199112 = VECTOR('',#199113,1.); +#199113 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#199114 = FACE_BOUND('',#199115,.F.); +#199115 = EDGE_LOOP('',(#199116,#199127,#199135,#199143,#199151,#199159, + #199167)); +#199116 = ORIENTED_EDGE('',*,*,#199117,.T.); +#199117 = EDGE_CURVE('',#199118,#199120,#199122,.T.); +#199118 = VERTEX_POINT('',#199119); +#199119 = CARTESIAN_POINT('',(206.455613,-79.575215,1.585)); +#199120 = VERTEX_POINT('',#199121); +#199121 = CARTESIAN_POINT('',(206.180727,-79.605622,1.585)); +#199122 = CIRCLE('',#199123,0.198386215365); +#199123 = AXIS2_PLACEMENT_3D('',#199124,#199125,#199126); +#199124 = CARTESIAN_POINT('',(206.33380995783,-79.7318071753,1.585)); +#199125 = DIRECTION('',(0.,0.,1.)); +#199126 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#199127 = ORIENTED_EDGE('',*,*,#199128,.T.); +#199128 = EDGE_CURVE('',#199120,#199129,#199131,.T.); +#199129 = VERTEX_POINT('',#199130); +#199130 = CARTESIAN_POINT('',(206.146469,-79.674138,1.585)); +#199131 = LINE('',#199132,#199133); +#199132 = CARTESIAN_POINT('',(206.180727,-79.605622,1.585)); +#199133 = VECTOR('',#199134,1.); +#199134 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#199135 = ORIENTED_EDGE('',*,*,#199136,.T.); +#199136 = EDGE_CURVE('',#199129,#199137,#199139,.T.); +#199137 = VERTEX_POINT('',#199138); +#199138 = CARTESIAN_POINT('',(206.146469,-79.962385,1.585)); +#199139 = LINE('',#199140,#199141); +#199140 = CARTESIAN_POINT('',(206.146469,-79.674138,1.585)); +#199141 = VECTOR('',#199142,1.); +#199142 = DIRECTION('',(0.,-1.,0.)); +#199143 = ORIENTED_EDGE('',*,*,#199144,.T.); +#199144 = EDGE_CURVE('',#199137,#199145,#199147,.T.); +#199145 = VERTEX_POINT('',#199146); +#199146 = CARTESIAN_POINT('',(206.520278,-79.962385,1.585)); +#199147 = LINE('',#199148,#199149); +#199148 = CARTESIAN_POINT('',(206.146469,-79.962385,1.585)); +#199149 = VECTOR('',#199150,1.); +#199150 = DIRECTION('',(1.,0.,0.)); +#199151 = ORIENTED_EDGE('',*,*,#199152,.T.); +#199152 = EDGE_CURVE('',#199145,#199153,#199155,.T.); +#199153 = VERTEX_POINT('',#199154); +#199154 = CARTESIAN_POINT('',(206.520278,-79.674138,1.585)); +#199155 = LINE('',#199156,#199157); +#199156 = CARTESIAN_POINT('',(206.520278,-79.962385,1.585)); +#199157 = VECTOR('',#199158,1.); +#199158 = DIRECTION('',(0.,1.,0.)); +#199159 = ORIENTED_EDGE('',*,*,#199160,.T.); +#199160 = EDGE_CURVE('',#199153,#199161,#199163,.T.); +#199161 = VERTEX_POINT('',#199162); +#199162 = CARTESIAN_POINT('',(206.48602,-79.605622,1.585)); +#199163 = LINE('',#199164,#199165); +#199164 = CARTESIAN_POINT('',(206.520278,-79.674138,1.585)); +#199165 = VECTOR('',#199166,1.); +#199166 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#199167 = ORIENTED_EDGE('',*,*,#199168,.T.); +#199168 = EDGE_CURVE('',#199161,#199118,#199169,.T.); +#199169 = LINE('',#199170,#199171); +#199170 = CARTESIAN_POINT('',(206.48602,-79.605622,1.585)); +#199171 = VECTOR('',#199172,1.); +#199172 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#199173 = PLANE('',#199174); +#199174 = AXIS2_PLACEMENT_3D('',#199175,#199176,#199177); +#199175 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199176 = DIRECTION('',(0.,0.,1.)); +#199177 = DIRECTION('',(1.,0.,-0.)); +#199178 = SHELL_BASED_SURFACE_MODEL('',(#199179)); +#199179 = OPEN_SHELL('',(#199180)); +#199180 = ADVANCED_FACE('',(#199181),#199308,.T.); +#199181 = FACE_BOUND('',#199182,.F.); +#199182 = EDGE_LOOP('',(#199183,#199194,#199202,#199210,#199218,#199226, + #199235,#199243,#199251,#199259,#199268,#199276,#199285,#199293, + #199302)); +#199183 = ORIENTED_EDGE('',*,*,#199184,.T.); +#199184 = EDGE_CURVE('',#199185,#199187,#199189,.T.); +#199185 = VERTEX_POINT('',#199186); +#199186 = CARTESIAN_POINT('',(128.459597,-79.593571,1.585)); +#199187 = VERTEX_POINT('',#199188); +#199188 = CARTESIAN_POINT('',(128.459597,-79.463571,1.585)); +#199189 = CIRCLE('',#199190,6.500000000091E-02); +#199190 = AXIS2_PLACEMENT_3D('',#199191,#199192,#199193); +#199191 = CARTESIAN_POINT('',(128.45959734486,-79.528571,1.585)); +#199192 = DIRECTION('',(0.,0.,-1.)); +#199193 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#199194 = ORIENTED_EDGE('',*,*,#199195,.T.); +#199195 = EDGE_CURVE('',#199187,#199196,#199198,.T.); +#199196 = VERTEX_POINT('',#199197); +#199197 = CARTESIAN_POINT('',(129.191361,-79.464206,1.585)); +#199198 = LINE('',#199199,#199200); +#199199 = CARTESIAN_POINT('',(128.459597,-79.463571,1.585)); +#199200 = VECTOR('',#199201,1.); +#199201 = DIRECTION('',(0.999999623491,-8.677657836673E-04,0.)); +#199202 = ORIENTED_EDGE('',*,*,#199203,.T.); +#199203 = EDGE_CURVE('',#199196,#199204,#199206,.T.); +#199204 = VERTEX_POINT('',#199205); +#199205 = CARTESIAN_POINT('',(129.217237,-79.470433,1.585)); +#199206 = LINE('',#199207,#199208); +#199207 = CARTESIAN_POINT('',(129.191361,-79.464206,1.585)); +#199208 = VECTOR('',#199209,1.); +#199209 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#199210 = ORIENTED_EDGE('',*,*,#199211,.T.); +#199211 = EDGE_CURVE('',#199204,#199212,#199214,.T.); +#199212 = VERTEX_POINT('',#199213); +#199213 = CARTESIAN_POINT('',(129.319843,-79.525466,1.585)); +#199214 = LINE('',#199215,#199216); +#199215 = CARTESIAN_POINT('',(129.217237,-79.470433,1.585)); +#199216 = VECTOR('',#199217,1.); +#199217 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#199218 = ORIENTED_EDGE('',*,*,#199219,.T.); +#199219 = EDGE_CURVE('',#199212,#199220,#199222,.T.); +#199220 = VERTEX_POINT('',#199221); +#199221 = CARTESIAN_POINT('',(129.374878,-79.585216,1.585)); +#199222 = LINE('',#199223,#199224); +#199223 = CARTESIAN_POINT('',(129.319843,-79.525466,1.585)); +#199224 = VECTOR('',#199225,1.); +#199225 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#199226 = ORIENTED_EDGE('',*,*,#199227,.T.); +#199227 = EDGE_CURVE('',#199220,#199228,#199230,.T.); +#199228 = VERTEX_POINT('',#199229); +#199229 = CARTESIAN_POINT('',(129.368491,-79.99444,1.585)); +#199230 = CIRCLE('',#199231,0.358409955812); +#199231 = AXIS2_PLACEMENT_3D('',#199232,#199233,#199234); +#199232 = CARTESIAN_POINT('',(129.07747311066,-79.78523606955,1.585)); +#199233 = DIRECTION('',(0.,0.,-1.)); +#199234 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#199235 = ORIENTED_EDGE('',*,*,#199236,.T.); +#199236 = EDGE_CURVE('',#199228,#199237,#199239,.T.); +#199237 = VERTEX_POINT('',#199238); +#199238 = CARTESIAN_POINT('',(129.311186,-80.051746,1.585)); +#199239 = LINE('',#199240,#199241); +#199240 = CARTESIAN_POINT('',(129.368491,-79.99444,1.585)); +#199241 = VECTOR('',#199242,1.); +#199242 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#199243 = ORIENTED_EDGE('',*,*,#199244,.T.); +#199244 = EDGE_CURVE('',#199237,#199245,#199247,.T.); +#199245 = VERTEX_POINT('',#199246); +#199246 = CARTESIAN_POINT('',(129.202824,-80.104941,1.585)); +#199247 = LINE('',#199248,#199249); +#199248 = CARTESIAN_POINT('',(129.311186,-80.051746,1.585)); +#199249 = VECTOR('',#199250,1.); +#199250 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#199251 = ORIENTED_EDGE('',*,*,#199252,.T.); +#199252 = EDGE_CURVE('',#199245,#199253,#199255,.T.); +#199253 = VERTEX_POINT('',#199254); +#199254 = CARTESIAN_POINT('',(128.459597,-80.107857,1.585)); +#199255 = LINE('',#199256,#199257); +#199256 = CARTESIAN_POINT('',(129.202824,-80.104941,1.585)); +#199257 = VECTOR('',#199258,1.); +#199258 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#199259 = ORIENTED_EDGE('',*,*,#199260,.T.); +#199260 = EDGE_CURVE('',#199253,#199261,#199263,.T.); +#199261 = VERTEX_POINT('',#199262); +#199262 = CARTESIAN_POINT('',(128.459597,-79.977857,1.585)); +#199263 = CIRCLE('',#199264,6.500000000091E-02); +#199264 = AXIS2_PLACEMENT_3D('',#199265,#199266,#199267); +#199265 = CARTESIAN_POINT('',(128.45959734486,-80.042857,1.585)); +#199266 = DIRECTION('',(0.,0.,-1.)); +#199267 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#199268 = ORIENTED_EDGE('',*,*,#199269,.T.); +#199269 = EDGE_CURVE('',#199261,#199270,#199272,.T.); +#199270 = VERTEX_POINT('',#199271); +#199271 = CARTESIAN_POINT('',(129.172823,-79.977857,1.585)); +#199272 = LINE('',#199273,#199274); +#199273 = CARTESIAN_POINT('',(128.459597,-79.977857,1.585)); +#199274 = VECTOR('',#199275,1.); +#199275 = DIRECTION('',(1.,0.,0.)); +#199276 = ORIENTED_EDGE('',*,*,#199277,.T.); +#199277 = EDGE_CURVE('',#199270,#199278,#199280,.T.); +#199278 = VERTEX_POINT('',#199279); +#199279 = CARTESIAN_POINT('',(129.294597,-79.856083,1.585)); +#199280 = CIRCLE('',#199281,0.170996196456); +#199281 = AXIS2_PLACEMENT_3D('',#199282,#199283,#199284); +#199282 = CARTESIAN_POINT('',(129.1292465,-79.8125065,1.585)); +#199283 = DIRECTION('',(0.,0.,1.)); +#199284 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#199285 = ORIENTED_EDGE('',*,*,#199286,.T.); +#199286 = EDGE_CURVE('',#199278,#199287,#199289,.T.); +#199287 = VERTEX_POINT('',#199288); +#199288 = CARTESIAN_POINT('',(129.294597,-79.715344,1.585)); +#199289 = LINE('',#199290,#199291); +#199290 = CARTESIAN_POINT('',(129.294597,-79.856083,1.585)); +#199291 = VECTOR('',#199292,1.); +#199292 = DIRECTION('',(0.,1.,0.)); +#199293 = ORIENTED_EDGE('',*,*,#199294,.T.); +#199294 = EDGE_CURVE('',#199287,#199295,#199297,.T.); +#199295 = VERTEX_POINT('',#199296); +#199296 = CARTESIAN_POINT('',(129.172823,-79.593571,1.585)); +#199297 = CIRCLE('',#199298,0.170997370267); +#199298 = AXIS2_PLACEMENT_3D('',#199299,#199300,#199301); +#199299 = CARTESIAN_POINT('',(129.12924582251,-79.75892253534,1.585)); +#199300 = DIRECTION('',(0.,0.,1.)); +#199301 = DIRECTION('',(0.966980820969,0.254849155144,-0.)); +#199302 = ORIENTED_EDGE('',*,*,#199303,.T.); +#199303 = EDGE_CURVE('',#199295,#199185,#199304,.T.); +#199304 = LINE('',#199305,#199306); +#199305 = CARTESIAN_POINT('',(129.172823,-79.593571,1.585)); +#199306 = VECTOR('',#199307,1.); +#199307 = DIRECTION('',(-1.,0.,0.)); +#199308 = PLANE('',#199309); +#199309 = AXIS2_PLACEMENT_3D('',#199310,#199311,#199312); +#199310 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199311 = DIRECTION('',(0.,0.,1.)); +#199312 = DIRECTION('',(1.,0.,-0.)); +#199313 = SHELL_BASED_SURFACE_MODEL('',(#199314)); +#199314 = OPEN_SHELL('',(#199315)); +#199315 = ADVANCED_FACE('',(#199316,#199417),#199492,.T.); +#199316 = FACE_BOUND('',#199317,.F.); +#199317 = EDGE_LOOP('',(#199318,#199329,#199337,#199345,#199353,#199361, + #199369,#199378,#199386,#199395,#199403,#199411)); +#199318 = ORIENTED_EDGE('',*,*,#199319,.T.); +#199319 = EDGE_CURVE('',#199320,#199322,#199324,.T.); +#199320 = VERTEX_POINT('',#199321); +#199321 = CARTESIAN_POINT('',(145.33087,-79.241104,1.585)); +#199322 = VERTEX_POINT('',#199323); +#199323 = CARTESIAN_POINT('',(145.761693,-79.143695,1.585)); +#199324 = CIRCLE('',#199325,0.670538401945); +#199325 = AXIS2_PLACEMENT_3D('',#199326,#199327,#199328); +#199326 = CARTESIAN_POINT('',(145.68590657351,-79.80993682249,1.585)); +#199327 = DIRECTION('',(0.,0.,-1.)); +#199328 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#199329 = ORIENTED_EDGE('',*,*,#199330,.T.); +#199330 = EDGE_CURVE('',#199322,#199331,#199333,.T.); +#199331 = VERTEX_POINT('',#199332); +#199332 = CARTESIAN_POINT('',(145.95438,-79.191861,1.585)); +#199333 = LINE('',#199334,#199335); +#199334 = CARTESIAN_POINT('',(145.761693,-79.143695,1.585)); +#199335 = VECTOR('',#199336,1.); +#199336 = DIRECTION('',(0.970149311613,-0.242508377541,0.)); +#199337 = ORIENTED_EDGE('',*,*,#199338,.T.); +#199338 = EDGE_CURVE('',#199331,#199339,#199341,.T.); +#199339 = VERTEX_POINT('',#199340); +#199340 = CARTESIAN_POINT('',(146.056987,-79.246894,1.585)); +#199341 = LINE('',#199342,#199343); +#199342 = CARTESIAN_POINT('',(145.95438,-79.191861,1.585)); +#199343 = VECTOR('',#199344,1.); +#199344 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#199345 = ORIENTED_EDGE('',*,*,#199346,.T.); +#199346 = EDGE_CURVE('',#199339,#199347,#199349,.T.); +#199347 = VERTEX_POINT('',#199348); +#199348 = CARTESIAN_POINT('',(146.150999,-79.345027,1.585)); +#199349 = LINE('',#199350,#199351); +#199350 = CARTESIAN_POINT('',(146.056987,-79.246894,1.585)); +#199351 = VECTOR('',#199352,1.); +#199352 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#199353 = ORIENTED_EDGE('',*,*,#199354,.T.); +#199354 = EDGE_CURVE('',#199347,#199355,#199357,.T.); +#199355 = VERTEX_POINT('',#199356); +#199356 = CARTESIAN_POINT('',(146.202563,-79.496919,1.585)); +#199357 = LINE('',#199358,#199359); +#199358 = CARTESIAN_POINT('',(146.150999,-79.345027,1.585)); +#199359 = VECTOR('',#199360,1.); +#199360 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#199361 = ORIENTED_EDGE('',*,*,#199362,.T.); +#199362 = EDGE_CURVE('',#199355,#199363,#199365,.T.); +#199363 = VERTEX_POINT('',#199364); +#199364 = CARTESIAN_POINT('',(146.204597,-79.721428,1.585)); +#199365 = LINE('',#199366,#199367); +#199366 = CARTESIAN_POINT('',(146.202563,-79.496919,1.585)); +#199367 = VECTOR('',#199368,1.); +#199368 = DIRECTION('',(9.05939864485E-03,-0.999958962806,0.)); +#199369 = ORIENTED_EDGE('',*,*,#199370,.T.); +#199370 = EDGE_CURVE('',#199363,#199371,#199373,.T.); +#199371 = VERTEX_POINT('',#199372); +#199372 = CARTESIAN_POINT('',(146.139597,-79.786428,1.585)); +#199373 = CIRCLE('',#199374,6.500103935393E-02); +#199374 = AXIS2_PLACEMENT_3D('',#199375,#199376,#199377); +#199375 = CARTESIAN_POINT('',(146.13959596065,-79.72142696065,1.585)); +#199376 = DIRECTION('',(0.,0.,-1.)); +#199377 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#199378 = ORIENTED_EDGE('',*,*,#199379,.T.); +#199379 = EDGE_CURVE('',#199371,#199380,#199382,.T.); +#199380 = VERTEX_POINT('',#199381); +#199381 = CARTESIAN_POINT('',(145.239597,-79.786428,1.585)); +#199382 = LINE('',#199383,#199384); +#199383 = CARTESIAN_POINT('',(146.139597,-79.786428,1.585)); +#199384 = VECTOR('',#199385,1.); +#199385 = DIRECTION('',(-1.,0.,0.)); +#199386 = ORIENTED_EDGE('',*,*,#199387,.T.); +#199387 = EDGE_CURVE('',#199380,#199388,#199390,.T.); +#199388 = VERTEX_POINT('',#199389); +#199389 = CARTESIAN_POINT('',(145.174597,-79.721428,1.585)); +#199390 = CIRCLE('',#199391,6.500103935387E-02); +#199391 = AXIS2_PLACEMENT_3D('',#199392,#199393,#199394); +#199392 = CARTESIAN_POINT('',(145.23959803934,-79.72142696065,1.585)); +#199393 = DIRECTION('',(0.,0.,-1.)); +#199394 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#199395 = ORIENTED_EDGE('',*,*,#199396,.T.); +#199396 = EDGE_CURVE('',#199388,#199397,#199399,.T.); +#199397 = VERTEX_POINT('',#199398); +#199398 = CARTESIAN_POINT('',(145.17663,-79.496919,1.585)); +#199399 = LINE('',#199400,#199401); +#199400 = CARTESIAN_POINT('',(145.174597,-79.721428,1.585)); +#199401 = VECTOR('',#199402,1.); +#199402 = DIRECTION('',(9.05494502838E-03,0.999959003145,0.)); +#199403 = ORIENTED_EDGE('',*,*,#199404,.T.); +#199404 = EDGE_CURVE('',#199397,#199405,#199407,.T.); +#199405 = VERTEX_POINT('',#199406); +#199406 = CARTESIAN_POINT('',(145.228191,-79.345031,1.585)); +#199407 = LINE('',#199408,#199409); +#199408 = CARTESIAN_POINT('',(145.17663,-79.496919,1.585)); +#199409 = VECTOR('',#199410,1.); +#199410 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#199411 = ORIENTED_EDGE('',*,*,#199412,.T.); +#199412 = EDGE_CURVE('',#199405,#199320,#199413,.T.); +#199413 = LINE('',#199414,#199415); +#199414 = CARTESIAN_POINT('',(145.228191,-79.345031,1.585)); +#199415 = VECTOR('',#199416,1.); +#199416 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#199417 = FACE_BOUND('',#199418,.F.); +#199418 = EDGE_LOOP('',(#199419,#199430,#199438,#199446,#199454,#199462, + #199470,#199478,#199486)); +#199419 = ORIENTED_EDGE('',*,*,#199420,.T.); +#199420 = EDGE_CURVE('',#199421,#199423,#199425,.T.); +#199421 = VERTEX_POINT('',#199422); +#199422 = CARTESIAN_POINT('',(145.902622,-79.311327,1.585)); +#199423 = VERTEX_POINT('',#199424); +#199424 = CARTESIAN_POINT('',(145.406669,-79.346277,1.585)); +#199425 = CIRCLE('',#199426,0.559258743581); +#199426 = AXIS2_PLACEMENT_3D('',#199427,#199428,#199429); +#199427 = CARTESIAN_POINT('',(145.68986183298,-79.82853436035,1.585)); +#199428 = DIRECTION('',(0.,0.,1.)); +#199429 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#199430 = ORIENTED_EDGE('',*,*,#199431,.T.); +#199431 = EDGE_CURVE('',#199423,#199432,#199434,.T.); +#199432 = VERTEX_POINT('',#199433); +#199433 = CARTESIAN_POINT('',(145.339265,-79.413683,1.585)); +#199434 = LINE('',#199435,#199436); +#199435 = CARTESIAN_POINT('',(145.406669,-79.346277,1.585)); +#199436 = VECTOR('',#199437,1.); +#199437 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#199438 = ORIENTED_EDGE('',*,*,#199439,.T.); +#199439 = EDGE_CURVE('',#199432,#199440,#199442,.T.); +#199440 = VERTEX_POINT('',#199441); +#199441 = CARTESIAN_POINT('',(145.304597,-79.517689,1.585)); +#199442 = LINE('',#199443,#199444); +#199443 = CARTESIAN_POINT('',(145.339265,-79.413683,1.585)); +#199444 = VECTOR('',#199445,1.); +#199445 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#199446 = ORIENTED_EDGE('',*,*,#199447,.T.); +#199447 = EDGE_CURVE('',#199440,#199448,#199450,.T.); +#199448 = VERTEX_POINT('',#199449); +#199449 = CARTESIAN_POINT('',(145.304597,-79.656428,1.585)); +#199450 = LINE('',#199451,#199452); +#199451 = CARTESIAN_POINT('',(145.304597,-79.517689,1.585)); +#199452 = VECTOR('',#199453,1.); +#199453 = DIRECTION('',(0.,-1.,0.)); +#199454 = ORIENTED_EDGE('',*,*,#199455,.T.); +#199455 = EDGE_CURVE('',#199448,#199456,#199458,.T.); +#199456 = VERTEX_POINT('',#199457); +#199457 = CARTESIAN_POINT('',(146.074597,-79.656428,1.585)); +#199458 = LINE('',#199459,#199460); +#199459 = CARTESIAN_POINT('',(145.304597,-79.656428,1.585)); +#199460 = VECTOR('',#199461,1.); +#199461 = DIRECTION('',(1.,0.,0.)); +#199462 = ORIENTED_EDGE('',*,*,#199463,.T.); +#199463 = EDGE_CURVE('',#199456,#199464,#199466,.T.); +#199464 = VERTEX_POINT('',#199465); +#199465 = CARTESIAN_POINT('',(146.074597,-79.517689,1.585)); +#199466 = LINE('',#199467,#199468); +#199467 = CARTESIAN_POINT('',(146.074597,-79.656428,1.585)); +#199468 = VECTOR('',#199469,1.); +#199469 = DIRECTION('',(0.,1.,0.)); +#199470 = ORIENTED_EDGE('',*,*,#199471,.T.); +#199471 = EDGE_CURVE('',#199464,#199472,#199474,.T.); +#199472 = VERTEX_POINT('',#199473); +#199473 = CARTESIAN_POINT('',(146.039928,-79.413683,1.585)); +#199474 = LINE('',#199475,#199476); +#199475 = CARTESIAN_POINT('',(146.074597,-79.517689,1.585)); +#199476 = VECTOR('',#199477,1.); +#199477 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#199478 = ORIENTED_EDGE('',*,*,#199479,.T.); +#199479 = EDGE_CURVE('',#199472,#199480,#199482,.T.); +#199480 = VERTEX_POINT('',#199481); +#199481 = CARTESIAN_POINT('',(145.972522,-79.346277,1.585)); +#199482 = LINE('',#199483,#199484); +#199483 = CARTESIAN_POINT('',(146.039928,-79.413683,1.585)); +#199484 = VECTOR('',#199485,1.); +#199485 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#199486 = ORIENTED_EDGE('',*,*,#199487,.T.); +#199487 = EDGE_CURVE('',#199480,#199421,#199488,.T.); +#199488 = LINE('',#199489,#199490); +#199489 = CARTESIAN_POINT('',(145.972522,-79.346277,1.585)); +#199490 = VECTOR('',#199491,1.); +#199491 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#199492 = PLANE('',#199493); +#199493 = AXIS2_PLACEMENT_3D('',#199494,#199495,#199496); +#199494 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199495 = DIRECTION('',(0.,0.,1.)); +#199496 = DIRECTION('',(1.,0.,-0.)); +#199497 = SHELL_BASED_SURFACE_MODEL('',(#199498)); +#199498 = OPEN_SHELL('',(#199499)); +#199499 = ADVANCED_FACE('',(#199500),#199586,.T.); +#199500 = FACE_BOUND('',#199501,.F.); +#199501 = EDGE_LOOP('',(#199502,#199513,#199521,#199530,#199538,#199546, + #199555,#199563,#199572,#199580)); +#199502 = ORIENTED_EDGE('',*,*,#199503,.T.); +#199503 = EDGE_CURVE('',#199504,#199506,#199508,.T.); +#199504 = VERTEX_POINT('',#199505); +#199505 = CARTESIAN_POINT('',(113.239597,-78.957856,1.585)); +#199506 = VERTEX_POINT('',#199507); +#199507 = CARTESIAN_POINT('',(113.239597,-78.827856,1.585)); +#199508 = CIRCLE('',#199509,6.500000000092E-02); +#199509 = AXIS2_PLACEMENT_3D('',#199510,#199511,#199512); +#199510 = CARTESIAN_POINT('',(113.23959734486,-78.892856,1.585)); +#199511 = DIRECTION('',(0.,0.,-1.)); +#199512 = DIRECTION('',(-5.305658244296E-06,-0.999999999986,-0.)); +#199513 = ORIENTED_EDGE('',*,*,#199514,.T.); +#199514 = EDGE_CURVE('',#199506,#199515,#199517,.T.); +#199515 = VERTEX_POINT('',#199516); +#199516 = CARTESIAN_POINT('',(114.139597,-78.827856,1.585)); +#199517 = LINE('',#199518,#199519); +#199518 = CARTESIAN_POINT('',(113.239597,-78.827856,1.585)); +#199519 = VECTOR('',#199520,1.); +#199520 = DIRECTION('',(1.,0.,0.)); +#199521 = ORIENTED_EDGE('',*,*,#199522,.T.); +#199522 = EDGE_CURVE('',#199515,#199523,#199525,.T.); +#199523 = VERTEX_POINT('',#199524); +#199524 = CARTESIAN_POINT('',(114.171846,-78.949292,1.585)); +#199525 = CIRCLE('',#199526,6.500021194142E-02); +#199526 = AXIS2_PLACEMENT_3D('',#199527,#199528,#199529); +#199527 = CARTESIAN_POINT('',(114.13959651351,-78.89285621194,1.585)); +#199528 = DIRECTION('',(0.,0.,-1.)); +#199529 = DIRECTION('',(7.484332334091E-06,0.999999999972,0.)); +#199530 = ORIENTED_EDGE('',*,*,#199531,.T.); +#199531 = EDGE_CURVE('',#199523,#199532,#199534,.T.); +#199532 = VERTEX_POINT('',#199533); +#199533 = CARTESIAN_POINT('',(113.484359,-79.342142,1.585)); +#199534 = LINE('',#199535,#199536); +#199535 = CARTESIAN_POINT('',(114.171846,-78.949292,1.585)); +#199536 = VECTOR('',#199537,1.); +#199537 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#199538 = ORIENTED_EDGE('',*,*,#199539,.T.); +#199539 = EDGE_CURVE('',#199532,#199540,#199542,.T.); +#199540 = VERTEX_POINT('',#199541); +#199541 = CARTESIAN_POINT('',(114.139597,-79.342142,1.585)); +#199542 = LINE('',#199543,#199544); +#199543 = CARTESIAN_POINT('',(113.484359,-79.342142,1.585)); +#199544 = VECTOR('',#199545,1.); +#199545 = DIRECTION('',(1.,0.,0.)); +#199546 = ORIENTED_EDGE('',*,*,#199547,.T.); +#199547 = EDGE_CURVE('',#199540,#199548,#199550,.T.); +#199548 = VERTEX_POINT('',#199549); +#199549 = CARTESIAN_POINT('',(114.139597,-79.472142,1.585)); +#199550 = CIRCLE('',#199551,6.500000000092E-02); +#199551 = AXIS2_PLACEMENT_3D('',#199552,#199553,#199554); +#199552 = CARTESIAN_POINT('',(114.13959665513,-79.407142,1.585)); +#199553 = DIRECTION('',(0.,0.,-1.)); +#199554 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#199555 = ORIENTED_EDGE('',*,*,#199556,.T.); +#199556 = EDGE_CURVE('',#199548,#199557,#199559,.T.); +#199557 = VERTEX_POINT('',#199558); +#199558 = CARTESIAN_POINT('',(113.239597,-79.472142,1.585)); +#199559 = LINE('',#199560,#199561); +#199560 = CARTESIAN_POINT('',(114.139597,-79.472142,1.585)); +#199561 = VECTOR('',#199562,1.); +#199562 = DIRECTION('',(-1.,0.,0.)); +#199563 = ORIENTED_EDGE('',*,*,#199564,.T.); +#199564 = EDGE_CURVE('',#199557,#199565,#199567,.T.); +#199565 = VERTEX_POINT('',#199566); +#199566 = CARTESIAN_POINT('',(113.207348,-79.350706,1.585)); +#199567 = CIRCLE('',#199568,6.500021194142E-02); +#199568 = AXIS2_PLACEMENT_3D('',#199569,#199570,#199571); +#199569 = CARTESIAN_POINT('',(113.23959748648,-79.40714178806,1.585)); +#199570 = DIRECTION('',(0.,0.,-1.)); +#199571 = DIRECTION('',(-7.484332334091E-06,-0.999999999972,-0.)); +#199572 = ORIENTED_EDGE('',*,*,#199573,.T.); +#199573 = EDGE_CURVE('',#199565,#199574,#199576,.T.); +#199574 = VERTEX_POINT('',#199575); +#199575 = CARTESIAN_POINT('',(113.894835,-78.957856,1.585)); +#199576 = LINE('',#199577,#199578); +#199577 = CARTESIAN_POINT('',(113.207348,-79.350706,1.585)); +#199578 = VECTOR('',#199579,1.); +#199579 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#199580 = ORIENTED_EDGE('',*,*,#199581,.T.); +#199581 = EDGE_CURVE('',#199574,#199504,#199582,.T.); +#199582 = LINE('',#199583,#199584); +#199583 = CARTESIAN_POINT('',(113.894835,-78.957856,1.585)); +#199584 = VECTOR('',#199585,1.); +#199585 = DIRECTION('',(-1.,0.,0.)); +#199586 = PLANE('',#199587); +#199587 = AXIS2_PLACEMENT_3D('',#199588,#199589,#199590); +#199588 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199589 = DIRECTION('',(0.,0.,1.)); +#199590 = DIRECTION('',(1.,0.,-0.)); +#199591 = SHELL_BASED_SURFACE_MODEL('',(#199592)); +#199592 = OPEN_SHELL('',(#199593)); +#199593 = ADVANCED_FACE('',(#199594),#199721,.T.); +#199594 = FACE_BOUND('',#199595,.F.); +#199595 = EDGE_LOOP('',(#199596,#199607,#199615,#199623,#199631,#199639, + #199648,#199656,#199664,#199672,#199681,#199689,#199698,#199706, + #199715)); +#199596 = ORIENTED_EDGE('',*,*,#199597,.T.); +#199597 = EDGE_CURVE('',#199598,#199600,#199602,.T.); +#199598 = VERTEX_POINT('',#199599); +#199599 = CARTESIAN_POINT('',(121.909597,-78.793571,1.585)); +#199600 = VERTEX_POINT('',#199601); +#199601 = CARTESIAN_POINT('',(121.909597,-78.663571,1.585)); +#199602 = CIRCLE('',#199603,6.500000000091E-02); +#199603 = AXIS2_PLACEMENT_3D('',#199604,#199605,#199606); +#199604 = CARTESIAN_POINT('',(121.90959734486,-78.728571,1.585)); +#199605 = DIRECTION('',(0.,0.,-1.)); +#199606 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#199607 = ORIENTED_EDGE('',*,*,#199608,.T.); +#199608 = EDGE_CURVE('',#199600,#199609,#199611,.T.); +#199609 = VERTEX_POINT('',#199610); +#199610 = CARTESIAN_POINT('',(122.641361,-78.664206,1.585)); +#199611 = LINE('',#199612,#199613); +#199612 = CARTESIAN_POINT('',(121.909597,-78.663571,1.585)); +#199613 = VECTOR('',#199614,1.); +#199614 = DIRECTION('',(0.999999623491,-8.677657836479E-04,0.)); +#199615 = ORIENTED_EDGE('',*,*,#199616,.T.); +#199616 = EDGE_CURVE('',#199609,#199617,#199619,.T.); +#199617 = VERTEX_POINT('',#199618); +#199618 = CARTESIAN_POINT('',(122.667237,-78.670433,1.585)); +#199619 = LINE('',#199620,#199621); +#199620 = CARTESIAN_POINT('',(122.641361,-78.664206,1.585)); +#199621 = VECTOR('',#199622,1.); +#199622 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#199623 = ORIENTED_EDGE('',*,*,#199624,.T.); +#199624 = EDGE_CURVE('',#199617,#199625,#199627,.T.); +#199625 = VERTEX_POINT('',#199626); +#199626 = CARTESIAN_POINT('',(122.769843,-78.725466,1.585)); +#199627 = LINE('',#199628,#199629); +#199628 = CARTESIAN_POINT('',(122.667237,-78.670433,1.585)); +#199629 = VECTOR('',#199630,1.); +#199630 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#199631 = ORIENTED_EDGE('',*,*,#199632,.T.); +#199632 = EDGE_CURVE('',#199625,#199633,#199635,.T.); +#199633 = VERTEX_POINT('',#199634); +#199634 = CARTESIAN_POINT('',(122.824878,-78.785216,1.585)); +#199635 = LINE('',#199636,#199637); +#199636 = CARTESIAN_POINT('',(122.769843,-78.725466,1.585)); +#199637 = VECTOR('',#199638,1.); +#199638 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#199639 = ORIENTED_EDGE('',*,*,#199640,.T.); +#199640 = EDGE_CURVE('',#199633,#199641,#199643,.T.); +#199641 = VERTEX_POINT('',#199642); +#199642 = CARTESIAN_POINT('',(122.818491,-79.19444,1.585)); +#199643 = CIRCLE('',#199644,0.358409955812); +#199644 = AXIS2_PLACEMENT_3D('',#199645,#199646,#199647); +#199645 = CARTESIAN_POINT('',(122.52747311066,-78.98523606955,1.585)); +#199646 = DIRECTION('',(0.,0.,-1.)); +#199647 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#199648 = ORIENTED_EDGE('',*,*,#199649,.T.); +#199649 = EDGE_CURVE('',#199641,#199650,#199652,.T.); +#199650 = VERTEX_POINT('',#199651); +#199651 = CARTESIAN_POINT('',(122.761186,-79.251746,1.585)); +#199652 = LINE('',#199653,#199654); +#199653 = CARTESIAN_POINT('',(122.818491,-79.19444,1.585)); +#199654 = VECTOR('',#199655,1.); +#199655 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#199656 = ORIENTED_EDGE('',*,*,#199657,.T.); +#199657 = EDGE_CURVE('',#199650,#199658,#199660,.T.); +#199658 = VERTEX_POINT('',#199659); +#199659 = CARTESIAN_POINT('',(122.652824,-79.304941,1.585)); +#199660 = LINE('',#199661,#199662); +#199661 = CARTESIAN_POINT('',(122.761186,-79.251746,1.585)); +#199662 = VECTOR('',#199663,1.); +#199663 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#199664 = ORIENTED_EDGE('',*,*,#199665,.T.); +#199665 = EDGE_CURVE('',#199658,#199666,#199668,.T.); +#199666 = VERTEX_POINT('',#199667); +#199667 = CARTESIAN_POINT('',(121.909597,-79.307857,1.585)); +#199668 = LINE('',#199669,#199670); +#199669 = CARTESIAN_POINT('',(122.652824,-79.304941,1.585)); +#199670 = VECTOR('',#199671,1.); +#199671 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#199672 = ORIENTED_EDGE('',*,*,#199673,.T.); +#199673 = EDGE_CURVE('',#199666,#199674,#199676,.T.); +#199674 = VERTEX_POINT('',#199675); +#199675 = CARTESIAN_POINT('',(121.909597,-79.177857,1.585)); +#199676 = CIRCLE('',#199677,6.500000000091E-02); +#199677 = AXIS2_PLACEMENT_3D('',#199678,#199679,#199680); +#199678 = CARTESIAN_POINT('',(121.90959734486,-79.242857,1.585)); +#199679 = DIRECTION('',(0.,0.,-1.)); +#199680 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#199681 = ORIENTED_EDGE('',*,*,#199682,.T.); +#199682 = EDGE_CURVE('',#199674,#199683,#199685,.T.); +#199683 = VERTEX_POINT('',#199684); +#199684 = CARTESIAN_POINT('',(122.622823,-79.177857,1.585)); +#199685 = LINE('',#199686,#199687); +#199686 = CARTESIAN_POINT('',(121.909597,-79.177857,1.585)); +#199687 = VECTOR('',#199688,1.); +#199688 = DIRECTION('',(1.,0.,0.)); +#199689 = ORIENTED_EDGE('',*,*,#199690,.T.); +#199690 = EDGE_CURVE('',#199683,#199691,#199693,.T.); +#199691 = VERTEX_POINT('',#199692); +#199692 = CARTESIAN_POINT('',(122.744597,-79.056083,1.585)); +#199693 = CIRCLE('',#199694,0.170996196456); +#199694 = AXIS2_PLACEMENT_3D('',#199695,#199696,#199697); +#199695 = CARTESIAN_POINT('',(122.5792465,-79.0125065,1.585)); +#199696 = DIRECTION('',(0.,0.,1.)); +#199697 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#199698 = ORIENTED_EDGE('',*,*,#199699,.T.); +#199699 = EDGE_CURVE('',#199691,#199700,#199702,.T.); +#199700 = VERTEX_POINT('',#199701); +#199701 = CARTESIAN_POINT('',(122.744597,-78.915344,1.585)); +#199702 = LINE('',#199703,#199704); +#199703 = CARTESIAN_POINT('',(122.744597,-79.056083,1.585)); +#199704 = VECTOR('',#199705,1.); +#199705 = DIRECTION('',(0.,1.,0.)); +#199706 = ORIENTED_EDGE('',*,*,#199707,.T.); +#199707 = EDGE_CURVE('',#199700,#199708,#199710,.T.); +#199708 = VERTEX_POINT('',#199709); +#199709 = CARTESIAN_POINT('',(122.622823,-78.793571,1.585)); +#199710 = CIRCLE('',#199711,0.170997370267); +#199711 = AXIS2_PLACEMENT_3D('',#199712,#199713,#199714); +#199712 = CARTESIAN_POINT('',(122.57924582251,-78.95892253534,1.585)); +#199713 = DIRECTION('',(0.,0.,1.)); +#199714 = DIRECTION('',(0.966980820969,0.254849155144,-0.)); +#199715 = ORIENTED_EDGE('',*,*,#199716,.T.); +#199716 = EDGE_CURVE('',#199708,#199598,#199717,.T.); +#199717 = LINE('',#199718,#199719); +#199718 = CARTESIAN_POINT('',(122.622823,-78.793571,1.585)); +#199719 = VECTOR('',#199720,1.); +#199720 = DIRECTION('',(-1.,0.,0.)); +#199721 = PLANE('',#199722); +#199722 = AXIS2_PLACEMENT_3D('',#199723,#199724,#199725); +#199723 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199724 = DIRECTION('',(0.,0.,1.)); +#199725 = DIRECTION('',(1.,0.,-0.)); +#199726 = SHELL_BASED_SURFACE_MODEL('',(#199727)); +#199727 = OPEN_SHELL('',(#199728)); +#199728 = ADVANCED_FACE('',(#199729),#199831,.T.); +#199729 = FACE_BOUND('',#199730,.F.); +#199730 = EDGE_LOOP('',(#199731,#199742,#199750,#199758,#199767,#199775, + #199783,#199792,#199800,#199808,#199817,#199825)); +#199731 = ORIENTED_EDGE('',*,*,#199732,.T.); +#199732 = EDGE_CURVE('',#199733,#199735,#199737,.T.); +#199733 = VERTEX_POINT('',#199734); +#199734 = CARTESIAN_POINT('',(172.345917,-78.293542,1.585)); +#199735 = VERTEX_POINT('',#199736); +#199736 = CARTESIAN_POINT('',(172.454083,-78.365653,1.585)); +#199737 = CIRCLE('',#199738,6.499976899535E-02); +#199738 = AXIS2_PLACEMENT_3D('',#199739,#199740,#199741); +#199739 = CARTESIAN_POINT('',(172.39999975277,-78.32959787083,1.585)); +#199740 = DIRECTION('',(0.,0.,-1.)); +#199741 = DIRECTION('',(-0.83204530747,0.554707676455,0.)); +#199742 = ORIENTED_EDGE('',*,*,#199743,.T.); +#199743 = EDGE_CURVE('',#199735,#199744,#199746,.T.); +#199744 = VERTEX_POINT('',#199745); +#199745 = CARTESIAN_POINT('',(172.17812,-78.779597,1.585)); +#199746 = LINE('',#199747,#199748); +#199747 = CARTESIAN_POINT('',(172.454083,-78.365653,1.585)); +#199748 = VECTOR('',#199749,1.); +#199749 = DIRECTION('',(-0.554700660084,-0.832049985099,0.)); +#199750 = ORIENTED_EDGE('',*,*,#199751,.T.); +#199751 = EDGE_CURVE('',#199744,#199752,#199754,.T.); +#199752 = VERTEX_POINT('',#199753); +#199753 = CARTESIAN_POINT('',(172.454083,-79.193541,1.585)); +#199754 = LINE('',#199755,#199756); +#199755 = CARTESIAN_POINT('',(172.17812,-78.779597,1.585)); +#199756 = VECTOR('',#199757,1.); +#199757 = DIRECTION('',(0.554700660084,-0.832049985099,0.)); +#199758 = ORIENTED_EDGE('',*,*,#199759,.T.); +#199759 = EDGE_CURVE('',#199752,#199760,#199762,.T.); +#199760 = VERTEX_POINT('',#199761); +#199761 = CARTESIAN_POINT('',(172.345917,-79.265652,1.585)); +#199762 = CIRCLE('',#199763,6.499976899535E-02); +#199763 = AXIS2_PLACEMENT_3D('',#199764,#199765,#199766); +#199764 = CARTESIAN_POINT('',(172.39999975277,-79.22959612917,1.585)); +#199765 = DIRECTION('',(0.,0.,-1.)); +#199766 = DIRECTION('',(0.832052914291,0.554696266276,0.)); +#199767 = ORIENTED_EDGE('',*,*,#199768,.T.); +#199768 = EDGE_CURVE('',#199760,#199769,#199771,.T.); +#199769 = VERTEX_POINT('',#199770); +#199770 = CARTESIAN_POINT('',(172.1,-78.896777,1.585)); +#199771 = LINE('',#199772,#199773); +#199772 = CARTESIAN_POINT('',(172.345917,-79.265652,1.585)); +#199773 = VECTOR('',#199774,1.); +#199774 = DIRECTION('',(-0.554700716758,0.832049947316,0.)); +#199775 = ORIENTED_EDGE('',*,*,#199776,.T.); +#199776 = EDGE_CURVE('',#199769,#199777,#199779,.T.); +#199777 = VERTEX_POINT('',#199778); +#199778 = CARTESIAN_POINT('',(171.854083,-79.265653,1.585)); +#199779 = LINE('',#199780,#199781); +#199780 = CARTESIAN_POINT('',(172.1,-78.896777,1.585)); +#199781 = VECTOR('',#199782,1.); +#199782 = DIRECTION('',(-0.554699675693,-0.832050641359,0.)); +#199783 = ORIENTED_EDGE('',*,*,#199784,.T.); +#199784 = EDGE_CURVE('',#199777,#199785,#199787,.T.); +#199785 = VERTEX_POINT('',#199786); +#199786 = CARTESIAN_POINT('',(171.745917,-79.193541,1.585)); +#199787 = CIRCLE('',#199788,6.500004634724E-02); +#199788 = AXIS2_PLACEMENT_3D('',#199789,#199790,#199791); +#199789 = CARTESIAN_POINT('',(171.80000020937,-79.22959668594,1.585)); +#199790 = DIRECTION('',(-0.,0.,-1.)); +#199791 = DIRECTION('',(0.832042339427,-0.554712128406,-0.)); +#199792 = ORIENTED_EDGE('',*,*,#199793,.T.); +#199793 = EDGE_CURVE('',#199785,#199794,#199796,.T.); +#199794 = VERTEX_POINT('',#199795); +#199795 = CARTESIAN_POINT('',(172.021879,-78.779597,1.585)); +#199796 = LINE('',#199797,#199798); +#199797 = CARTESIAN_POINT('',(171.745917,-79.193541,1.585)); +#199798 = VECTOR('',#199799,1.); +#199799 = DIRECTION('',(0.554699268506,0.832050912816,0.)); +#199800 = ORIENTED_EDGE('',*,*,#199801,.T.); +#199801 = EDGE_CURVE('',#199794,#199802,#199804,.T.); +#199802 = VERTEX_POINT('',#199803); +#199803 = CARTESIAN_POINT('',(171.745917,-78.365653,1.585)); +#199804 = LINE('',#199805,#199806); +#199805 = CARTESIAN_POINT('',(172.021879,-78.779597,1.585)); +#199806 = VECTOR('',#199807,1.); +#199807 = DIRECTION('',(-0.554699268506,0.832050912816,0.)); +#199808 = ORIENTED_EDGE('',*,*,#199809,.T.); +#199809 = EDGE_CURVE('',#199802,#199810,#199812,.T.); +#199810 = VERTEX_POINT('',#199811); +#199811 = CARTESIAN_POINT('',(171.854083,-78.293541,1.585)); +#199812 = CIRCLE('',#199813,6.500004634766E-02); +#199813 = AXIS2_PLACEMENT_3D('',#199814,#199815,#199816); +#199814 = CARTESIAN_POINT('',(171.80000024669,-78.32959737004,1.585)); +#199815 = DIRECTION('',(0.,0.,-1.)); +#199816 = DIRECTION('',(-0.832049355929,-0.554701603836,-0.)); +#199817 = ORIENTED_EDGE('',*,*,#199818,.T.); +#199818 = EDGE_CURVE('',#199810,#199819,#199821,.T.); +#199819 = VERTEX_POINT('',#199820); +#199820 = CARTESIAN_POINT('',(172.1,-78.662416,1.585)); +#199821 = LINE('',#199822,#199823); +#199822 = CARTESIAN_POINT('',(171.854083,-78.293541,1.585)); +#199823 = VECTOR('',#199824,1.); +#199824 = DIRECTION('',(0.554700716758,-0.832049947316,0.)); +#199825 = ORIENTED_EDGE('',*,*,#199826,.T.); +#199826 = EDGE_CURVE('',#199819,#199733,#199827,.T.); +#199827 = LINE('',#199828,#199829); +#199828 = CARTESIAN_POINT('',(172.1,-78.662416,1.585)); +#199829 = VECTOR('',#199830,1.); +#199830 = DIRECTION('',(0.554701757825,0.832049253269,0.)); +#199831 = PLANE('',#199832); +#199832 = AXIS2_PLACEMENT_3D('',#199833,#199834,#199835); +#199833 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199834 = DIRECTION('',(0.,0.,1.)); +#199835 = DIRECTION('',(1.,0.,-0.)); +#199836 = SHELL_BASED_SURFACE_MODEL('',(#199837)); +#199837 = OPEN_SHELL('',(#199838)); +#199838 = ADVANCED_FACE('',(#199839,#199973),#200025,.T.); +#199839 = FACE_BOUND('',#199840,.F.); +#199840 = EDGE_LOOP('',(#199841,#199852,#199860,#199868,#199876,#199885, + #199893,#199901,#199909,#199917,#199925,#199934,#199942,#199950, + #199958,#199967)); +#199841 = ORIENTED_EDGE('',*,*,#199842,.T.); +#199842 = EDGE_CURVE('',#199843,#199845,#199847,.T.); +#199843 = VERTEX_POINT('',#199844); +#199844 = CARTESIAN_POINT('',(170.920714,-78.329597,1.585)); +#199845 = VERTEX_POINT('',#199846); +#199846 = CARTESIAN_POINT('',(170.985714,-78.264597,1.585)); +#199847 = CIRCLE('',#199848,6.500103935386E-02); +#199848 = AXIS2_PLACEMENT_3D('',#199849,#199850,#199851); +#199849 = CARTESIAN_POINT('',(170.98571503934,-78.32959803934,1.585)); +#199850 = DIRECTION('',(0.,0.,-1.)); +#199851 = DIRECTION('',(-0.999999999872,1.598967539908E-05,0.)); +#199852 = ORIENTED_EDGE('',*,*,#199853,.T.); +#199853 = EDGE_CURVE('',#199845,#199854,#199856,.T.); +#199854 = VERTEX_POINT('',#199855); +#199855 = CARTESIAN_POINT('',(171.331764,-78.265232,1.585)); +#199856 = LINE('',#199857,#199858); +#199857 = CARTESIAN_POINT('',(170.985714,-78.264597,1.585)); +#199858 = VECTOR('',#199859,1.); +#199859 = DIRECTION('',(0.999998316401,-1.834991853539E-03,0.)); +#199860 = ORIENTED_EDGE('',*,*,#199861,.T.); +#199861 = EDGE_CURVE('',#199854,#199862,#199864,.T.); +#199862 = VERTEX_POINT('',#199863); +#199863 = CARTESIAN_POINT('',(171.35764,-78.271459,1.585)); +#199864 = LINE('',#199865,#199866); +#199865 = CARTESIAN_POINT('',(171.331764,-78.265232,1.585)); +#199866 = VECTOR('',#199867,1.); +#199867 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#199868 = ORIENTED_EDGE('',*,*,#199869,.T.); +#199869 = EDGE_CURVE('',#199862,#199870,#199872,.T.); +#199870 = VERTEX_POINT('',#199871); +#199871 = CARTESIAN_POINT('',(171.460248,-78.326492,1.585)); +#199872 = LINE('',#199873,#199874); +#199873 = CARTESIAN_POINT('',(171.35764,-78.271459,1.585)); +#199874 = VECTOR('',#199875,1.); +#199875 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#199876 = ORIENTED_EDGE('',*,*,#199877,.T.); +#199877 = EDGE_CURVE('',#199870,#199878,#199880,.T.); +#199878 = VERTEX_POINT('',#199879); +#199879 = CARTESIAN_POINT('',(171.562084,-78.644253,1.585)); +#199880 = CIRCLE('',#199881,0.311668456374); +#199881 = AXIS2_PLACEMENT_3D('',#199882,#199883,#199884); +#199882 = CARTESIAN_POINT('',(171.26047346242,-78.56571440872,1.585)); +#199883 = DIRECTION('',(0.,0.,-1.)); +#199884 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#199885 = ORIENTED_EDGE('',*,*,#199886,.T.); +#199886 = EDGE_CURVE('',#199878,#199887,#199889,.T.); +#199887 = VERTEX_POINT('',#199888); +#199888 = CARTESIAN_POINT('',(171.508894,-78.752608,1.585)); +#199889 = LINE('',#199890,#199891); +#199890 = CARTESIAN_POINT('',(171.562084,-78.644253,1.585)); +#199891 = VECTOR('',#199892,1.); +#199892 = DIRECTION('',(-0.440656804576,-0.897675654444,0.)); +#199893 = ORIENTED_EDGE('',*,*,#199894,.T.); +#199894 = EDGE_CURVE('',#199887,#199895,#199897,.T.); +#199895 = VERTEX_POINT('',#199896); +#199896 = CARTESIAN_POINT('',(171.451583,-78.809919,1.585)); +#199897 = LINE('',#199898,#199899); +#199898 = CARTESIAN_POINT('',(171.508894,-78.752608,1.585)); +#199899 = VECTOR('',#199900,1.); +#199900 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#199901 = ORIENTED_EDGE('',*,*,#199902,.T.); +#199902 = EDGE_CURVE('',#199895,#199903,#199905,.T.); +#199903 = VERTEX_POINT('',#199904); +#199904 = CARTESIAN_POINT('',(171.343227,-78.863109,1.585)); +#199905 = LINE('',#199906,#199907); +#199906 = CARTESIAN_POINT('',(171.451583,-78.809919,1.585)); +#199907 = VECTOR('',#199908,1.); +#199908 = DIRECTION('',(-0.897677263112,-0.440653527492,0.)); +#199909 = ORIENTED_EDGE('',*,*,#199910,.T.); +#199910 = EDGE_CURVE('',#199903,#199911,#199913,.T.); +#199911 = VERTEX_POINT('',#199912); +#199912 = CARTESIAN_POINT('',(171.324842,-78.866025,1.585)); +#199913 = LINE('',#199914,#199915); +#199914 = CARTESIAN_POINT('',(171.343227,-78.863109,1.585)); +#199915 = VECTOR('',#199916,1.); +#199916 = DIRECTION('',(-0.987654268842,-0.156649434209,0.)); +#199917 = ORIENTED_EDGE('',*,*,#199918,.T.); +#199918 = EDGE_CURVE('',#199911,#199919,#199921,.T.); +#199919 = VERTEX_POINT('',#199920); +#199920 = CARTESIAN_POINT('',(171.55325,-79.192322,1.585)); +#199921 = LINE('',#199922,#199923); +#199922 = CARTESIAN_POINT('',(171.324842,-78.866025,1.585)); +#199923 = VECTOR('',#199924,1.); +#199924 = DIRECTION('',(0.573462512866,-0.819231802567,0.)); +#199925 = ORIENTED_EDGE('',*,*,#199926,.T.); +#199926 = EDGE_CURVE('',#199919,#199927,#199929,.T.); +#199927 = VERTEX_POINT('',#199928); +#199928 = CARTESIAN_POINT('',(171.44675,-79.266872,1.585)); +#199929 = CIRCLE('',#199930,6.499990865383E-02); +#199930 = AXIS2_PLACEMENT_3D('',#199931,#199932,#199933); +#199931 = CARTESIAN_POINT('',(171.50000005055,-79.22959707222,1.585)); +#199932 = DIRECTION('',(0.,0.,-1.)); +#199933 = DIRECTION('',(0.819231142687,0.573463455551,0.)); +#199934 = ORIENTED_EDGE('',*,*,#199935,.T.); +#199935 = EDGE_CURVE('',#199927,#199936,#199938,.T.); +#199936 = VERTEX_POINT('',#199937); +#199937 = CARTESIAN_POINT('',(171.166157,-78.866025,1.585)); +#199938 = LINE('',#199939,#199940); +#199939 = CARTESIAN_POINT('',(171.44675,-79.266872,1.585)); +#199940 = VECTOR('',#199941,1.); +#199941 = DIRECTION('',(-0.573462481528,0.819231824504,0.)); +#199942 = ORIENTED_EDGE('',*,*,#199943,.T.); +#199943 = EDGE_CURVE('',#199936,#199944,#199946,.T.); +#199944 = VERTEX_POINT('',#199945); +#199945 = CARTESIAN_POINT('',(171.050714,-78.866025,1.585)); +#199946 = LINE('',#199947,#199948); +#199947 = CARTESIAN_POINT('',(171.166157,-78.866025,1.585)); +#199948 = VECTOR('',#199949,1.); +#199949 = DIRECTION('',(-1.,0.,0.)); +#199950 = ORIENTED_EDGE('',*,*,#199951,.T.); +#199951 = EDGE_CURVE('',#199944,#199952,#199954,.T.); +#199952 = VERTEX_POINT('',#199953); +#199953 = CARTESIAN_POINT('',(171.050714,-79.229597,1.585)); +#199954 = LINE('',#199955,#199956); +#199955 = CARTESIAN_POINT('',(171.050714,-78.866025,1.585)); +#199956 = VECTOR('',#199957,1.); +#199957 = DIRECTION('',(0.,-1.,0.)); +#199958 = ORIENTED_EDGE('',*,*,#199959,.T.); +#199959 = EDGE_CURVE('',#199952,#199960,#199962,.T.); +#199960 = VERTEX_POINT('',#199961); +#199961 = CARTESIAN_POINT('',(170.920714,-79.229597,1.585)); +#199962 = CIRCLE('',#199963,6.500000000091E-02); +#199963 = AXIS2_PLACEMENT_3D('',#199964,#199965,#199966); +#199964 = CARTESIAN_POINT('',(170.985714,-79.22959665513,1.585)); +#199965 = DIRECTION('',(-0.,0.,-1.)); +#199966 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#199967 = ORIENTED_EDGE('',*,*,#199968,.T.); +#199968 = EDGE_CURVE('',#199960,#199843,#199969,.T.); +#199969 = LINE('',#199970,#199971); +#199970 = CARTESIAN_POINT('',(170.920714,-79.229597,1.585)); +#199971 = VECTOR('',#199972,1.); +#199972 = DIRECTION('',(0.,1.,0.)); +#199973 = FACE_BOUND('',#199974,.F.); +#199974 = EDGE_LOOP('',(#199975,#199986,#199994,#200002,#200010,#200019) + ); +#199975 = ORIENTED_EDGE('',*,*,#199976,.T.); +#199976 = EDGE_CURVE('',#199977,#199979,#199981,.T.); +#199977 = VERTEX_POINT('',#199978); +#199978 = CARTESIAN_POINT('',(171.435,-78.51637,1.585)); +#199979 = VERTEX_POINT('',#199980); +#199980 = CARTESIAN_POINT('',(171.313226,-78.394597,1.585)); +#199981 = CIRCLE('',#199982,0.170996278941); +#199982 = AXIS2_PLACEMENT_3D('',#199983,#199984,#199985); +#199983 = CARTESIAN_POINT('',(171.2696497157,-78.55994764214,1.585)); +#199984 = DIRECTION('',(0.,0.,1.)); +#199985 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#199986 = ORIENTED_EDGE('',*,*,#199987,.T.); +#199987 = EDGE_CURVE('',#199979,#199988,#199990,.T.); +#199988 = VERTEX_POINT('',#199989); +#199989 = CARTESIAN_POINT('',(171.050714,-78.394597,1.585)); +#199990 = LINE('',#199991,#199992); +#199991 = CARTESIAN_POINT('',(171.313226,-78.394597,1.585)); +#199992 = VECTOR('',#199993,1.); +#199993 = DIRECTION('',(-1.,0.,0.)); +#199994 = ORIENTED_EDGE('',*,*,#199995,.T.); +#199995 = EDGE_CURVE('',#199988,#199996,#199998,.T.); +#199996 = VERTEX_POINT('',#199997); +#199997 = CARTESIAN_POINT('',(171.050714,-78.736025,1.585)); +#199998 = LINE('',#199999,#200000); +#199999 = CARTESIAN_POINT('',(171.050714,-78.394597,1.585)); +#200000 = VECTOR('',#200001,1.); +#200001 = DIRECTION('',(0.,-1.,0.)); +#200002 = ORIENTED_EDGE('',*,*,#200003,.T.); +#200003 = EDGE_CURVE('',#199996,#200004,#200006,.T.); +#200004 = VERTEX_POINT('',#200005); +#200005 = CARTESIAN_POINT('',(171.313226,-78.736025,1.585)); +#200006 = LINE('',#200007,#200008); +#200007 = CARTESIAN_POINT('',(171.050714,-78.736025,1.585)); +#200008 = VECTOR('',#200009,1.); +#200009 = DIRECTION('',(1.,0.,0.)); +#200010 = ORIENTED_EDGE('',*,*,#200011,.T.); +#200011 = EDGE_CURVE('',#200004,#200012,#200014,.T.); +#200012 = VERTEX_POINT('',#200013); +#200013 = CARTESIAN_POINT('',(171.435,-78.614252,1.585)); +#200014 = CIRCLE('',#200015,0.171001125777); +#200015 = AXIS2_PLACEMENT_3D('',#200016,#200017,#200018); +#200016 = CARTESIAN_POINT('',(171.26964574885,-78.57067039097,1.585)); +#200017 = DIRECTION('',(0.,0.,1.)); +#200018 = DIRECTION('',(0.254853592022,-0.966979651613,0.)); +#200019 = ORIENTED_EDGE('',*,*,#200020,.T.); +#200020 = EDGE_CURVE('',#200012,#199977,#200021,.T.); +#200021 = LINE('',#200022,#200023); +#200022 = CARTESIAN_POINT('',(171.435,-78.614252,1.585)); +#200023 = VECTOR('',#200024,1.); +#200024 = DIRECTION('',(0.,1.,0.)); +#200025 = PLANE('',#200026); +#200026 = AXIS2_PLACEMENT_3D('',#200027,#200028,#200029); +#200027 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200028 = DIRECTION('',(0.,0.,1.)); +#200029 = DIRECTION('',(1.,0.,-0.)); +#200030 = SHELL_BASED_SURFACE_MODEL('',(#200031)); +#200031 = OPEN_SHELL('',(#200032)); +#200032 = ADVANCED_FACE('',(#200033,#200118),#200144,.T.); +#200033 = FACE_BOUND('',#200034,.F.); +#200034 = EDGE_LOOP('',(#200035,#200046,#200054,#200062,#200071,#200079, + #200087,#200095,#200104,#200112)); +#200035 = ORIENTED_EDGE('',*,*,#200036,.T.); +#200036 = EDGE_CURVE('',#200037,#200039,#200041,.T.); +#200037 = VERTEX_POINT('',#200038); +#200038 = CARTESIAN_POINT('',(184.979983,-78.704936,1.585)); +#200039 = VERTEX_POINT('',#200040); +#200040 = CARTESIAN_POINT('',(184.9835,-78.577085,1.585)); +#200041 = CIRCLE('',#200042,0.105824997037); +#200042 = AXIS2_PLACEMENT_3D('',#200043,#200044,#200045); +#200043 = CARTESIAN_POINT('',(185.06602668479,-78.6433290661,1.585)); +#200044 = DIRECTION('',(0.,0.,-1.)); +#200045 = DIRECTION('',(-0.813075239388,-0.582158616783,-0.)); +#200046 = ORIENTED_EDGE('',*,*,#200047,.T.); +#200047 = EDGE_CURVE('',#200039,#200048,#200050,.T.); +#200048 = VERTEX_POINT('',#200049); +#200049 = CARTESIAN_POINT('',(185.015925,-78.548965,1.585)); +#200050 = LINE('',#200051,#200052); +#200051 = CARTESIAN_POINT('',(184.9835,-78.577085,1.585)); +#200052 = VECTOR('',#200053,1.); +#200053 = DIRECTION('',(0.755477635403,0.655174436624,0.)); +#200054 = ORIENTED_EDGE('',*,*,#200055,.T.); +#200055 = EDGE_CURVE('',#200048,#200056,#200058,.T.); +#200056 = VERTEX_POINT('',#200057); +#200057 = CARTESIAN_POINT('',(186.656642,-78.002059,1.585)); +#200058 = LINE('',#200059,#200060); +#200059 = CARTESIAN_POINT('',(185.015925,-78.548965,1.585)); +#200060 = VECTOR('',#200061,1.); +#200061 = DIRECTION('',(0.948683240229,0.316227939481,0.)); +#200062 = ORIENTED_EDGE('',*,*,#200063,.T.); +#200063 = EDGE_CURVE('',#200056,#200064,#200066,.T.); +#200064 = VERTEX_POINT('',#200065); +#200065 = CARTESIAN_POINT('',(186.724875,-78.206758,1.585)); +#200066 = CIRCLE('',#200067,0.109999550634); +#200067 = AXIS2_PLACEMENT_3D('',#200068,#200069,#200070); +#200068 = CARTESIAN_POINT('',(186.67039945101,-78.11119484966,1.585)); +#200069 = DIRECTION('',(0.,0.,-1.)); +#200070 = DIRECTION('',(-0.125068247445,0.992148140895,-0.)); +#200071 = ORIENTED_EDGE('',*,*,#200072,.T.); +#200072 = EDGE_CURVE('',#200064,#200073,#200075,.T.); +#200073 = VERTEX_POINT('',#200074); +#200074 = CARTESIAN_POINT('',(186.323257,-78.342859,1.585)); +#200075 = LINE('',#200076,#200077); +#200076 = CARTESIAN_POINT('',(186.724875,-78.206758,1.585)); +#200077 = VECTOR('',#200078,1.); +#200078 = DIRECTION('',(-0.947095053732,-0.32095320406,0.)); +#200079 = ORIENTED_EDGE('',*,*,#200080,.T.); +#200080 = EDGE_CURVE('',#200073,#200081,#200083,.T.); +#200081 = VERTEX_POINT('',#200082); +#200082 = CARTESIAN_POINT('',(186.323257,-78.946197,1.585)); +#200083 = LINE('',#200084,#200085); +#200084 = CARTESIAN_POINT('',(186.323257,-78.342859,1.585)); +#200085 = VECTOR('',#200086,1.); +#200086 = DIRECTION('',(0.,-1.,0.)); +#200087 = ORIENTED_EDGE('',*,*,#200088,.T.); +#200088 = EDGE_CURVE('',#200081,#200089,#200091,.T.); +#200089 = VERTEX_POINT('',#200090); +#200090 = CARTESIAN_POINT('',(186.724875,-79.082299,1.585)); +#200091 = LINE('',#200092,#200093); +#200092 = CARTESIAN_POINT('',(186.323257,-78.946197,1.585)); +#200093 = VECTOR('',#200094,1.); +#200094 = DIRECTION('',(0.947094336901,-0.320955319336,0.)); +#200095 = ORIENTED_EDGE('',*,*,#200096,.T.); +#200096 = EDGE_CURVE('',#200089,#200097,#200099,.T.); +#200097 = VERTEX_POINT('',#200098); +#200098 = CARTESIAN_POINT('',(186.656642,-79.286998,1.585)); +#200099 = CIRCLE('',#200100,0.109999365974); +#200100 = AXIS2_PLACEMENT_3D('',#200101,#200102,#200103); +#200101 = CARTESIAN_POINT('',(186.67040034898,-79.17786244966,1.585)); +#200102 = DIRECTION('',(0.,0.,-1.)); +#200103 = DIRECTION('',(0.495226954596,0.868763640723,0.)); +#200104 = ORIENTED_EDGE('',*,*,#200105,.T.); +#200105 = EDGE_CURVE('',#200097,#200106,#200108,.T.); +#200106 = VERTEX_POINT('',#200107); +#200107 = CARTESIAN_POINT('',(185.015925,-78.740091,1.585)); +#200108 = LINE('',#200109,#200110); +#200109 = CARTESIAN_POINT('',(186.656642,-79.286998,1.585)); +#200110 = VECTOR('',#200111,1.); +#200111 = DIRECTION('',(-0.948683066765,0.316228459872,0.)); +#200112 = ORIENTED_EDGE('',*,*,#200113,.T.); +#200113 = EDGE_CURVE('',#200106,#200037,#200114,.T.); +#200114 = LINE('',#200115,#200116); +#200115 = CARTESIAN_POINT('',(185.015925,-78.740091,1.585)); +#200116 = VECTOR('',#200117,1.); +#200117 = DIRECTION('',(-0.714890220874,0.699236706773,0.)); +#200118 = FACE_BOUND('',#200119,.F.); +#200119 = EDGE_LOOP('',(#200120,#200130,#200138)); +#200120 = ORIENTED_EDGE('',*,*,#200121,.T.); +#200121 = EDGE_CURVE('',#200122,#200124,#200126,.T.); +#200122 = VERTEX_POINT('',#200123); +#200123 = CARTESIAN_POINT('',(185.418249,-78.644528,1.585)); +#200124 = VERTEX_POINT('',#200125); +#200125 = CARTESIAN_POINT('',(186.103257,-78.872864,1.585)); +#200126 = LINE('',#200127,#200128); +#200127 = CARTESIAN_POINT('',(185.418249,-78.644528,1.585)); +#200128 = VECTOR('',#200129,1.); +#200129 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#200130 = ORIENTED_EDGE('',*,*,#200131,.T.); +#200131 = EDGE_CURVE('',#200124,#200132,#200134,.T.); +#200132 = VERTEX_POINT('',#200133); +#200133 = CARTESIAN_POINT('',(186.103257,-78.416192,1.585)); +#200134 = LINE('',#200135,#200136); +#200135 = CARTESIAN_POINT('',(186.103257,-78.872864,1.585)); +#200136 = VECTOR('',#200137,1.); +#200137 = DIRECTION('',(0.,1.,0.)); +#200138 = ORIENTED_EDGE('',*,*,#200139,.T.); +#200139 = EDGE_CURVE('',#200132,#200122,#200140,.T.); +#200140 = LINE('',#200141,#200142); +#200141 = CARTESIAN_POINT('',(186.103257,-78.416192,1.585)); +#200142 = VECTOR('',#200143,1.); +#200143 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#200144 = PLANE('',#200145); +#200145 = AXIS2_PLACEMENT_3D('',#200146,#200147,#200148); +#200146 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200147 = DIRECTION('',(0.,0.,1.)); +#200148 = DIRECTION('',(1.,0.,-0.)); +#200149 = SHELL_BASED_SURFACE_MODEL('',(#200150)); +#200150 = OPEN_SHELL('',(#200151)); +#200151 = ADVANCED_FACE('',(#200152),#200196,.T.); +#200152 = FACE_BOUND('',#200153,.F.); +#200153 = EDGE_LOOP('',(#200154,#200165,#200173,#200182,#200190)); +#200154 = ORIENTED_EDGE('',*,*,#200155,.T.); +#200155 = EDGE_CURVE('',#200156,#200158,#200160,.T.); +#200156 = VERTEX_POINT('',#200157); +#200157 = CARTESIAN_POINT('',(128.956688,-78.389412,1.585)); +#200158 = VERTEX_POINT('',#200159); +#200159 = CARTESIAN_POINT('',(129.08174,-78.414286,1.585)); +#200160 = CIRCLE('',#200161,6.499988811648E-02); +#200161 = AXIS2_PLACEMENT_3D('',#200162,#200163,#200164); +#200162 = CARTESIAN_POINT('',(129.01674011188,-78.4142862701,1.585)); +#200163 = DIRECTION('',(0.,0.,-1.)); +#200164 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#200165 = ORIENTED_EDGE('',*,*,#200166,.T.); +#200166 = EDGE_CURVE('',#200158,#200167,#200169,.T.); +#200167 = VERTEX_POINT('',#200168); +#200168 = CARTESIAN_POINT('',(129.08174,-79.1,1.585)); +#200169 = LINE('',#200170,#200171); +#200170 = CARTESIAN_POINT('',(129.08174,-78.414286,1.585)); +#200171 = VECTOR('',#200172,1.); +#200172 = DIRECTION('',(0.,-1.,0.)); +#200173 = ORIENTED_EDGE('',*,*,#200174,.T.); +#200174 = EDGE_CURVE('',#200167,#200175,#200177,.T.); +#200175 = VERTEX_POINT('',#200176); +#200176 = CARTESIAN_POINT('',(128.95174,-79.1,1.585)); +#200177 = CIRCLE('',#200178,6.500000000092E-02); +#200178 = AXIS2_PLACEMENT_3D('',#200179,#200180,#200181); +#200179 = CARTESIAN_POINT('',(129.01674,-79.09999965513,1.585)); +#200180 = DIRECTION('',(-0.,0.,-1.)); +#200181 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#200182 = ORIENTED_EDGE('',*,*,#200183,.T.); +#200183 = EDGE_CURVE('',#200175,#200184,#200186,.T.); +#200184 = VERTEX_POINT('',#200185); +#200185 = CARTESIAN_POINT('',(128.95174,-78.414286,1.585)); +#200186 = LINE('',#200187,#200188); +#200187 = CARTESIAN_POINT('',(128.95174,-79.1,1.585)); +#200188 = VECTOR('',#200189,1.); +#200189 = DIRECTION('',(0.,1.,0.)); +#200190 = ORIENTED_EDGE('',*,*,#200191,.T.); +#200191 = EDGE_CURVE('',#200184,#200156,#200192,.T.); +#200192 = LINE('',#200193,#200194); +#200193 = CARTESIAN_POINT('',(128.95174,-78.414286,1.585)); +#200194 = VECTOR('',#200195,1.); +#200195 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#200196 = PLANE('',#200197); +#200197 = AXIS2_PLACEMENT_3D('',#200198,#200199,#200200); +#200198 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200199 = DIRECTION('',(0.,0.,1.)); +#200200 = DIRECTION('',(1.,0.,-0.)); +#200201 = SHELL_BASED_SURFACE_MODEL('',(#200202)); +#200202 = OPEN_SHELL('',(#200203)); +#200203 = ADVANCED_FACE('',(#200204),#200338,.T.); +#200204 = FACE_BOUND('',#200205,.F.); +#200205 = EDGE_LOOP('',(#200206,#200217,#200225,#200234,#200242,#200250, + #200258,#200266,#200275,#200283,#200291,#200299,#200308,#200316, + #200324,#200332)); +#200206 = ORIENTED_EDGE('',*,*,#200207,.T.); +#200207 = EDGE_CURVE('',#200208,#200210,#200212,.T.); +#200208 = VERTEX_POINT('',#200209); +#200209 = CARTESIAN_POINT('',(207.029801,-78.451216,1.585)); +#200210 = VERTEX_POINT('',#200211); +#200211 = CARTESIAN_POINT('',(207.146469,-78.513576,1.585)); +#200212 = CIRCLE('',#200213,7.500000000003E-02); +#200213 = AXIS2_PLACEMENT_3D('',#200214,#200215,#200216); +#200214 = CARTESIAN_POINT('',(207.071469,-78.51357606555,1.585)); +#200215 = DIRECTION('',(0.,0.,-1.)); +#200216 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#200217 = ORIENTED_EDGE('',*,*,#200218,.T.); +#200218 = EDGE_CURVE('',#200210,#200219,#200221,.T.); +#200219 = VERTEX_POINT('',#200220); +#200220 = CARTESIAN_POINT('',(207.145028,-79.099636,1.585)); +#200221 = LINE('',#200222,#200223); +#200222 = CARTESIAN_POINT('',(207.146469,-78.513576,1.585)); +#200223 = VECTOR('',#200224,1.); +#200224 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#200225 = ORIENTED_EDGE('',*,*,#200226,.T.); +#200226 = EDGE_CURVE('',#200219,#200227,#200229,.T.); +#200227 = VERTEX_POINT('',#200228); +#200228 = CARTESIAN_POINT('',(206.996469,-79.085004,1.585)); +#200229 = CIRCLE('',#200230,7.500006711464E-02); +#200230 = AXIS2_PLACEMENT_3D('',#200231,#200232,#200233); +#200231 = CARTESIAN_POINT('',(207.07146906711,-79.08500406711,1.585)); +#200232 = DIRECTION('',(-0.,0.,-1.)); +#200233 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#200234 = ORIENTED_EDGE('',*,*,#200235,.T.); +#200235 = EDGE_CURVE('',#200227,#200236,#200238,.T.); +#200236 = VERTEX_POINT('',#200237); +#200237 = CARTESIAN_POINT('',(206.996469,-78.87429,1.585)); +#200238 = LINE('',#200239,#200240); +#200239 = CARTESIAN_POINT('',(206.996469,-79.085004,1.585)); +#200240 = VECTOR('',#200241,1.); +#200241 = DIRECTION('',(0.,1.,0.)); +#200242 = ORIENTED_EDGE('',*,*,#200243,.T.); +#200243 = EDGE_CURVE('',#200236,#200244,#200246,.T.); +#200244 = VERTEX_POINT('',#200245); +#200245 = CARTESIAN_POINT('',(206.300154,-78.87429,1.585)); +#200246 = LINE('',#200247,#200248); +#200247 = CARTESIAN_POINT('',(206.996469,-78.87429,1.585)); +#200248 = VECTOR('',#200249,1.); +#200249 = DIRECTION('',(-1.,0.,0.)); +#200250 = ORIENTED_EDGE('',*,*,#200251,.T.); +#200251 = EDGE_CURVE('',#200244,#200252,#200254,.T.); +#200252 = VERTEX_POINT('',#200253); +#200253 = CARTESIAN_POINT('',(206.372683,-78.94993,1.585)); +#200254 = LINE('',#200255,#200256); +#200255 = CARTESIAN_POINT('',(206.300154,-78.87429,1.585)); +#200256 = VECTOR('',#200257,1.); +#200257 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#200258 = ORIENTED_EDGE('',*,*,#200259,.T.); +#200259 = EDGE_CURVE('',#200252,#200260,#200262,.T.); +#200260 = VERTEX_POINT('',#200261); +#200261 = CARTESIAN_POINT('',(206.42952,-79.065194,1.585)); +#200262 = LINE('',#200263,#200264); +#200263 = CARTESIAN_POINT('',(206.372683,-78.94993,1.585)); +#200264 = VECTOR('',#200265,1.); +#200265 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#200266 = ORIENTED_EDGE('',*,*,#200267,.T.); +#200267 = EDGE_CURVE('',#200260,#200268,#200270,.T.); +#200268 = VERTEX_POINT('',#200269); +#200269 = CARTESIAN_POINT('',(206.290101,-79.118545,1.585)); +#200270 = CIRCLE('',#200271,7.500029440469E-02); +#200271 = AXIS2_PLACEMENT_3D('',#200272,#200273,#200274); +#200272 = CARTESIAN_POINT('',(206.35718305397,-79.08500335132,1.585)); +#200273 = DIRECTION('',(0.,0.,-1.)); +#200274 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#200275 = ORIENTED_EDGE('',*,*,#200276,.T.); +#200276 = EDGE_CURVE('',#200268,#200277,#200279,.T.); +#200277 = VERTEX_POINT('',#200278); +#200278 = CARTESIAN_POINT('',(206.247925,-79.034193,1.585)); +#200279 = LINE('',#200280,#200281); +#200280 = CARTESIAN_POINT('',(206.290101,-79.118545,1.585)); +#200281 = VECTOR('',#200282,1.); +#200282 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#200283 = ORIENTED_EDGE('',*,*,#200284,.T.); +#200284 = EDGE_CURVE('',#200277,#200285,#200287,.T.); +#200285 = VERTEX_POINT('',#200286); +#200286 = CARTESIAN_POINT('',(206.166544,-78.952812,1.585)); +#200287 = LINE('',#200288,#200289); +#200288 = CARTESIAN_POINT('',(206.247925,-79.034193,1.585)); +#200289 = VECTOR('',#200290,1.); +#200290 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#200291 = ORIENTED_EDGE('',*,*,#200292,.T.); +#200292 = EDGE_CURVE('',#200285,#200293,#200295,.T.); +#200293 = VERTEX_POINT('',#200294); +#200294 = CARTESIAN_POINT('',(206.018491,-78.852378,1.585)); +#200295 = LINE('',#200296,#200297); +#200296 = CARTESIAN_POINT('',(206.166544,-78.952812,1.585)); +#200297 = VECTOR('',#200298,1.); +#200298 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#200299 = ORIENTED_EDGE('',*,*,#200300,.T.); +#200300 = EDGE_CURVE('',#200293,#200301,#200303,.T.); +#200301 = VERTEX_POINT('',#200302); +#200302 = CARTESIAN_POINT('',(206.071469,-78.72429,1.585)); +#200303 = CIRCLE('',#200304,7.499993751709E-02); +#200304 = AXIS2_PLACEMENT_3D('',#200305,#200306,#200307); +#200305 = CARTESIAN_POINT('',(206.07146880902,-78.79928993751,1.585)); +#200306 = DIRECTION('',(0.,0.,-1.)); +#200307 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#200308 = ORIENTED_EDGE('',*,*,#200309,.T.); +#200309 = EDGE_CURVE('',#200301,#200310,#200312,.T.); +#200310 = VERTEX_POINT('',#200311); +#200311 = CARTESIAN_POINT('',(206.996469,-78.72429,1.585)); +#200312 = LINE('',#200313,#200314); +#200313 = CARTESIAN_POINT('',(206.071469,-78.72429,1.585)); +#200314 = VECTOR('',#200315,1.); +#200315 = DIRECTION('',(1.,0.,0.)); +#200316 = ORIENTED_EDGE('',*,*,#200317,.T.); +#200317 = EDGE_CURVE('',#200310,#200318,#200320,.T.); +#200318 = VERTEX_POINT('',#200319); +#200319 = CARTESIAN_POINT('',(206.99791,-78.498944,1.585)); +#200320 = LINE('',#200321,#200322); +#200321 = CARTESIAN_POINT('',(206.996469,-78.72429,1.585)); +#200322 = VECTOR('',#200323,1.); +#200323 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#200324 = ORIENTED_EDGE('',*,*,#200325,.T.); +#200325 = EDGE_CURVE('',#200318,#200326,#200328,.T.); +#200326 = VERTEX_POINT('',#200327); +#200327 = CARTESIAN_POINT('',(207.009109,-78.471908,1.585)); +#200328 = LINE('',#200329,#200330); +#200329 = CARTESIAN_POINT('',(206.99791,-78.498944,1.585)); +#200330 = VECTOR('',#200331,1.); +#200331 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200332 = ORIENTED_EDGE('',*,*,#200333,.T.); +#200333 = EDGE_CURVE('',#200326,#200208,#200334,.T.); +#200334 = LINE('',#200335,#200336); +#200335 = CARTESIAN_POINT('',(207.009109,-78.471908,1.585)); +#200336 = VECTOR('',#200337,1.); +#200337 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200338 = PLANE('',#200339); +#200339 = AXIS2_PLACEMENT_3D('',#200340,#200341,#200342); +#200340 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200341 = DIRECTION('',(0.,0.,1.)); +#200342 = DIRECTION('',(1.,0.,-0.)); +#200343 = SHELL_BASED_SURFACE_MODEL('',(#200344)); +#200344 = OPEN_SHELL('',(#200345)); +#200345 = ADVANCED_FACE('',(#200346),#200516,.T.); +#200346 = FACE_BOUND('',#200347,.F.); +#200347 = EDGE_LOOP('',(#200348,#200359,#200367,#200376,#200384,#200393, + #200401,#200409,#200417,#200426,#200434,#200443,#200451,#200460, + #200468,#200477,#200485,#200493,#200501,#200510)); +#200348 = ORIENTED_EDGE('',*,*,#200349,.T.); +#200349 = EDGE_CURVE('',#200350,#200352,#200354,.T.); +#200350 = VERTEX_POINT('',#200351); +#200351 = CARTESIAN_POINT('',(116.999349,-78.425466,1.585)); +#200352 = VERTEX_POINT('',#200353); +#200353 = CARTESIAN_POINT('',(117.091273,-78.51739,1.585)); +#200354 = CIRCLE('',#200355,6.50000837538E-02); +#200355 = AXIS2_PLACEMENT_3D('',#200356,#200357,#200358); +#200356 = CARTESIAN_POINT('',(117.04531098493,-78.47142801506,1.585)); +#200357 = DIRECTION('',(0.,0.,-1.)); +#200358 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#200359 = ORIENTED_EDGE('',*,*,#200360,.T.); +#200360 = EDGE_CURVE('',#200352,#200361,#200363,.T.); +#200361 = VERTEX_POINT('',#200362); +#200362 = CARTESIAN_POINT('',(117.059266,-78.549396,1.585)); +#200363 = LINE('',#200364,#200365); +#200364 = CARTESIAN_POINT('',(117.091273,-78.51739,1.585)); +#200365 = VECTOR('',#200366,1.); +#200366 = DIRECTION('',(-0.7071178274,-0.7070957348,0.)); +#200367 = ORIENTED_EDGE('',*,*,#200368,.T.); +#200368 = EDGE_CURVE('',#200361,#200369,#200371,.T.); +#200369 = VERTEX_POINT('',#200370); +#200370 = CARTESIAN_POINT('',(117.059265,-78.822029,1.585)); +#200371 = CIRCLE('',#200372,0.272201331757); +#200372 = AXIS2_PLACEMENT_3D('',#200373,#200374,#200375); +#200373 = CARTESIAN_POINT('',(117.29487402454,-78.68571336419,1.585)); +#200374 = DIRECTION('',(0.,0.,1.)); +#200375 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#200376 = ORIENTED_EDGE('',*,*,#200377,.T.); +#200377 = EDGE_CURVE('',#200369,#200378,#200380,.T.); +#200378 = VERTEX_POINT('',#200379); +#200379 = CARTESIAN_POINT('',(117.126669,-78.889435,1.585)); +#200380 = LINE('',#200381,#200382); +#200381 = CARTESIAN_POINT('',(117.059265,-78.822029,1.585)); +#200382 = VECTOR('',#200383,1.); +#200383 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#200384 = ORIENTED_EDGE('',*,*,#200385,.T.); +#200385 = EDGE_CURVE('',#200378,#200386,#200388,.T.); +#200386 = VERTEX_POINT('',#200387); +#200387 = CARTESIAN_POINT('',(117.465881,-78.963571,1.585)); +#200388 = CIRCLE('',#200389,0.553317785495); +#200389 = AXIS2_PLACEMENT_3D('',#200390,#200391,#200392); +#200390 = CARTESIAN_POINT('',(117.4084500839,-78.41324176979,1.585)); +#200391 = DIRECTION('',(0.,0.,1.)); +#200392 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#200393 = ORIENTED_EDGE('',*,*,#200394,.T.); +#200394 = EDGE_CURVE('',#200386,#200395,#200397,.T.); +#200395 = VERTEX_POINT('',#200396); +#200396 = CARTESIAN_POINT('',(117.622622,-78.924385,1.585)); +#200397 = LINE('',#200398,#200399); +#200398 = CARTESIAN_POINT('',(117.465881,-78.963571,1.585)); +#200399 = VECTOR('',#200400,1.); +#200400 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#200401 = ORIENTED_EDGE('',*,*,#200402,.T.); +#200402 = EDGE_CURVE('',#200395,#200403,#200405,.T.); +#200403 = VERTEX_POINT('',#200404); +#200404 = CARTESIAN_POINT('',(117.692522,-78.889436,1.585)); +#200405 = LINE('',#200406,#200407); +#200406 = CARTESIAN_POINT('',(117.622622,-78.924385,1.585)); +#200407 = VECTOR('',#200408,1.); +#200408 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#200409 = ORIENTED_EDGE('',*,*,#200410,.T.); +#200410 = EDGE_CURVE('',#200403,#200411,#200413,.T.); +#200411 = VERTEX_POINT('',#200412); +#200412 = CARTESIAN_POINT('',(117.759928,-78.822029,1.585)); +#200413 = LINE('',#200414,#200415); +#200414 = CARTESIAN_POINT('',(117.692522,-78.889436,1.585)); +#200415 = VECTOR('',#200416,1.); +#200416 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#200417 = ORIENTED_EDGE('',*,*,#200418,.T.); +#200418 = EDGE_CURVE('',#200411,#200419,#200421,.T.); +#200419 = VERTEX_POINT('',#200420); +#200420 = CARTESIAN_POINT('',(117.759928,-78.549397,1.585)); +#200421 = CIRCLE('',#200422,0.272194686174); +#200422 = AXIS2_PLACEMENT_3D('',#200423,#200424,#200425); +#200423 = CARTESIAN_POINT('',(117.52432686391,-78.685713,1.585)); +#200424 = DIRECTION('',(0.,-0.,1.)); +#200425 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#200426 = ORIENTED_EDGE('',*,*,#200427,.T.); +#200427 = EDGE_CURVE('',#200419,#200428,#200430,.T.); +#200428 = VERTEX_POINT('',#200429); +#200429 = CARTESIAN_POINT('',(117.727921,-78.51739,1.585)); +#200430 = LINE('',#200431,#200432); +#200431 = CARTESIAN_POINT('',(117.759928,-78.549397,1.585)); +#200432 = VECTOR('',#200433,1.); +#200433 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#200434 = ORIENTED_EDGE('',*,*,#200435,.T.); +#200435 = EDGE_CURVE('',#200428,#200436,#200438,.T.); +#200436 = VERTEX_POINT('',#200437); +#200437 = CARTESIAN_POINT('',(117.819843,-78.425466,1.585)); +#200438 = CIRCLE('',#200439,6.49993766517E-02); +#200439 = AXIS2_PLACEMENT_3D('',#200440,#200441,#200442); +#200440 = CARTESIAN_POINT('',(117.77388176676,-78.47142776677,1.585)); +#200441 = DIRECTION('',(0.,0.,-1.)); +#200442 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#200443 = ORIENTED_EDGE('',*,*,#200444,.T.); +#200444 = EDGE_CURVE('',#200436,#200445,#200447,.T.); +#200445 = VERTEX_POINT('',#200446); +#200446 = CARTESIAN_POINT('',(117.871003,-78.480747,1.585)); +#200447 = LINE('',#200448,#200449); +#200448 = CARTESIAN_POINT('',(117.819843,-78.425466,1.585)); +#200449 = VECTOR('',#200450,1.); +#200450 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#200451 = ORIENTED_EDGE('',*,*,#200452,.T.); +#200452 = EDGE_CURVE('',#200445,#200453,#200455,.T.); +#200453 = VERTEX_POINT('',#200454); +#200454 = CARTESIAN_POINT('',(117.870999,-78.890685,1.585)); +#200455 = CIRCLE('',#200456,0.409312568567); +#200456 = AXIS2_PLACEMENT_3D('',#200457,#200458,#200459); +#200457 = CARTESIAN_POINT('',(117.51670664806,-78.68571254294,1.585)); +#200458 = DIRECTION('',(0.,0.,-1.)); +#200459 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#200460 = ORIENTED_EDGE('',*,*,#200461,.T.); +#200461 = EDGE_CURVE('',#200453,#200462,#200464,.T.); +#200462 = VERTEX_POINT('',#200463); +#200463 = CARTESIAN_POINT('',(117.768322,-78.994608,1.585)); +#200464 = LINE('',#200465,#200466); +#200465 = CARTESIAN_POINT('',(117.870999,-78.890685,1.585)); +#200466 = VECTOR('',#200467,1.); +#200467 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#200468 = ORIENTED_EDGE('',*,*,#200469,.T.); +#200469 = EDGE_CURVE('',#200462,#200470,#200472,.T.); +#200470 = VERTEX_POINT('',#200471); +#200471 = CARTESIAN_POINT('',(117.329546,-79.09163,1.585)); +#200472 = CIRCLE('',#200473,0.675422176574); +#200473 = AXIS2_PLACEMENT_3D('',#200474,#200475,#200476); +#200474 = CARTESIAN_POINT('',(117.41141275007,-78.42118764465,1.585)); +#200475 = DIRECTION('',(0.,0.,-1.)); +#200476 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#200477 = ORIENTED_EDGE('',*,*,#200478,.T.); +#200478 = EDGE_CURVE('',#200470,#200479,#200481,.T.); +#200479 = VERTEX_POINT('',#200480); +#200480 = CARTESIAN_POINT('',(117.144813,-79.043852,1.585)); +#200481 = LINE('',#200482,#200483); +#200482 = CARTESIAN_POINT('',(117.329546,-79.09163,1.585)); +#200483 = VECTOR('',#200484,1.); +#200484 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#200485 = ORIENTED_EDGE('',*,*,#200486,.T.); +#200486 = EDGE_CURVE('',#200479,#200487,#200489,.T.); +#200487 = VERTEX_POINT('',#200488); +#200488 = CARTESIAN_POINT('',(117.042206,-78.988819,1.585)); +#200489 = LINE('',#200490,#200491); +#200490 = CARTESIAN_POINT('',(117.144813,-79.043852,1.585)); +#200491 = VECTOR('',#200492,1.); +#200492 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#200493 = ORIENTED_EDGE('',*,*,#200494,.T.); +#200494 = EDGE_CURVE('',#200487,#200495,#200497,.T.); +#200495 = VERTEX_POINT('',#200496); +#200496 = CARTESIAN_POINT('',(116.948191,-78.890681,1.585)); +#200497 = LINE('',#200498,#200499); +#200498 = CARTESIAN_POINT('',(117.042206,-78.988819,1.585)); +#200499 = VECTOR('',#200500,1.); +#200500 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#200501 = ORIENTED_EDGE('',*,*,#200502,.T.); +#200502 = EDGE_CURVE('',#200495,#200503,#200505,.T.); +#200503 = VERTEX_POINT('',#200504); +#200504 = CARTESIAN_POINT('',(116.948194,-78.480741,1.585)); +#200505 = CIRCLE('',#200506,0.409312909751); +#200506 = AXIS2_PLACEMENT_3D('',#200507,#200508,#200509); +#200507 = CARTESIAN_POINT('',(117.30248666757,-78.68571359277,1.585)); +#200508 = DIRECTION('',(0.,0.,-1.)); +#200509 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#200510 = ORIENTED_EDGE('',*,*,#200511,.T.); +#200511 = EDGE_CURVE('',#200503,#200350,#200512,.T.); +#200512 = LINE('',#200513,#200514); +#200513 = CARTESIAN_POINT('',(116.948194,-78.480741,1.585)); +#200514 = VECTOR('',#200515,1.); +#200515 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#200516 = PLANE('',#200517); +#200517 = AXIS2_PLACEMENT_3D('',#200518,#200519,#200520); +#200518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200519 = DIRECTION('',(0.,0.,1.)); +#200520 = DIRECTION('',(1.,0.,-0.)); +#200521 = SHELL_BASED_SURFACE_MODEL('',(#200522)); +#200522 = OPEN_SHELL('',(#200523)); +#200523 = ADVANCED_FACE('',(#200524),#200681,.T.); +#200524 = FACE_BOUND('',#200525,.F.); +#200525 = EDGE_LOOP('',(#200526,#200536,#200544,#200553,#200561,#200569, + #200577,#200585,#200593,#200601,#200609,#200618,#200626,#200634, + #200642,#200650,#200659,#200667,#200675)); +#200526 = ORIENTED_EDGE('',*,*,#200527,.T.); +#200527 = EDGE_CURVE('',#200528,#200530,#200532,.T.); +#200528 = VERTEX_POINT('',#200529); +#200529 = CARTESIAN_POINT('',(166.369514,-77.924941,1.585)); +#200530 = VERTEX_POINT('',#200531); +#200531 = CARTESIAN_POINT('',(166.40797,-77.90436,1.585)); +#200532 = LINE('',#200533,#200534); +#200533 = CARTESIAN_POINT('',(166.369514,-77.924941,1.585)); +#200534 = VECTOR('',#200535,1.); +#200535 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#200536 = ORIENTED_EDGE('',*,*,#200537,.T.); +#200537 = EDGE_CURVE('',#200530,#200538,#200540,.T.); +#200538 = VERTEX_POINT('',#200539); +#200539 = CARTESIAN_POINT('',(166.429807,-77.90436,1.585)); +#200540 = LINE('',#200541,#200542); +#200541 = CARTESIAN_POINT('',(166.40797,-77.90436,1.585)); +#200542 = VECTOR('',#200543,1.); +#200543 = DIRECTION('',(1.,0.,0.)); +#200544 = ORIENTED_EDGE('',*,*,#200545,.T.); +#200545 = EDGE_CURVE('',#200538,#200546,#200548,.T.); +#200546 = VERTEX_POINT('',#200547); +#200547 = CARTESIAN_POINT('',(166.497602,-77.977919,1.585)); +#200548 = CIRCLE('',#200549,7.216898094227E-02); +#200549 = AXIS2_PLACEMENT_3D('',#200550,#200551,#200552); +#200550 = CARTESIAN_POINT('',(166.42544906389,-77.97639728342,1.585)); +#200551 = DIRECTION('',(0.,0.,-1.)); +#200552 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#200553 = ORIENTED_EDGE('',*,*,#200554,.T.); +#200554 = EDGE_CURVE('',#200546,#200555,#200557,.T.); +#200555 = VERTEX_POINT('',#200556); +#200556 = CARTESIAN_POINT('',(166.497602,-78.902919,1.585)); +#200557 = LINE('',#200558,#200559); +#200558 = CARTESIAN_POINT('',(166.497602,-77.977919,1.585)); +#200559 = VECTOR('',#200560,1.); +#200560 = DIRECTION('',(0.,-1.,0.)); +#200561 = ORIENTED_EDGE('',*,*,#200562,.T.); +#200562 = EDGE_CURVE('',#200555,#200563,#200565,.T.); +#200563 = VERTEX_POINT('',#200564); +#200564 = CARTESIAN_POINT('',(166.717739,-78.904326,1.585)); +#200565 = LINE('',#200566,#200567); +#200566 = CARTESIAN_POINT('',(166.497602,-78.902919,1.585)); +#200567 = VECTOR('',#200568,1.); +#200568 = DIRECTION('',(0.999979575153,-6.39134385515E-03,0.)); +#200569 = ORIENTED_EDGE('',*,*,#200570,.T.); +#200570 = EDGE_CURVE('',#200563,#200571,#200573,.T.); +#200571 = VERTEX_POINT('',#200572); +#200572 = CARTESIAN_POINT('',(166.714714,-78.90558,1.585)); +#200573 = LINE('',#200574,#200575); +#200574 = CARTESIAN_POINT('',(166.717739,-78.904326,1.585)); +#200575 = VECTOR('',#200576,1.); +#200576 = DIRECTION('',(-0.923771098667,-0.382945109993,0.)); +#200577 = ORIENTED_EDGE('',*,*,#200578,.T.); +#200578 = EDGE_CURVE('',#200571,#200579,#200581,.T.); +#200579 = VERTEX_POINT('',#200580); +#200580 = CARTESIAN_POINT('',(166.67333,-78.946964,1.585)); +#200581 = LINE('',#200582,#200583); +#200582 = CARTESIAN_POINT('',(166.714714,-78.90558,1.585)); +#200583 = VECTOR('',#200584,1.); +#200584 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200585 = ORIENTED_EDGE('',*,*,#200586,.T.); +#200586 = EDGE_CURVE('',#200579,#200587,#200589,.T.); +#200587 = VERTEX_POINT('',#200588); +#200588 = CARTESIAN_POINT('',(166.650932,-79.001036,1.585)); +#200589 = LINE('',#200590,#200591); +#200590 = CARTESIAN_POINT('',(166.67333,-78.946964,1.585)); +#200591 = VECTOR('',#200592,1.); +#200592 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200593 = ORIENTED_EDGE('',*,*,#200594,.T.); +#200594 = EDGE_CURVE('',#200587,#200595,#200597,.T.); +#200595 = VERTEX_POINT('',#200596); +#200596 = CARTESIAN_POINT('',(166.650932,-79.052777,1.585)); +#200597 = LINE('',#200598,#200599); +#200598 = CARTESIAN_POINT('',(166.650932,-79.001036,1.585)); +#200599 = VECTOR('',#200600,1.); +#200600 = DIRECTION('',(0.,-1.,0.)); +#200601 = ORIENTED_EDGE('',*,*,#200602,.T.); +#200602 = EDGE_CURVE('',#200595,#200603,#200605,.T.); +#200603 = VERTEX_POINT('',#200604); +#200604 = CARTESIAN_POINT('',(166.122256,-79.051478,1.585)); +#200605 = LINE('',#200606,#200607); +#200606 = CARTESIAN_POINT('',(166.650932,-79.052777,1.585)); +#200607 = VECTOR('',#200608,1.); +#200608 = DIRECTION('',(-0.999996981389,2.457074046916E-03,0.)); +#200609 = ORIENTED_EDGE('',*,*,#200610,.T.); +#200610 = EDGE_CURVE('',#200603,#200611,#200613,.T.); +#200611 = VERTEX_POINT('',#200612); +#200612 = CARTESIAN_POINT('',(166.136888,-78.902919,1.585)); +#200613 = CIRCLE('',#200614,7.500006711464E-02); +#200614 = AXIS2_PLACEMENT_3D('',#200615,#200616,#200617); +#200615 = CARTESIAN_POINT('',(166.13688793288,-78.97791906711,1.585)); +#200616 = DIRECTION('',(0.,0.,-1.)); +#200617 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#200618 = ORIENTED_EDGE('',*,*,#200619,.T.); +#200619 = EDGE_CURVE('',#200611,#200620,#200622,.T.); +#200620 = VERTEX_POINT('',#200621); +#200621 = CARTESIAN_POINT('',(166.347602,-78.902919,1.585)); +#200622 = LINE('',#200623,#200624); +#200623 = CARTESIAN_POINT('',(166.136888,-78.902919,1.585)); +#200624 = VECTOR('',#200625,1.); +#200625 = DIRECTION('',(1.,0.,0.)); +#200626 = ORIENTED_EDGE('',*,*,#200627,.T.); +#200627 = EDGE_CURVE('',#200620,#200628,#200630,.T.); +#200628 = VERTEX_POINT('',#200629); +#200629 = CARTESIAN_POINT('',(166.347602,-78.206604,1.585)); +#200630 = LINE('',#200631,#200632); +#200631 = CARTESIAN_POINT('',(166.347602,-78.902919,1.585)); +#200632 = VECTOR('',#200633,1.); +#200633 = DIRECTION('',(0.,1.,0.)); +#200634 = ORIENTED_EDGE('',*,*,#200635,.T.); +#200635 = EDGE_CURVE('',#200628,#200636,#200638,.T.); +#200636 = VERTEX_POINT('',#200637); +#200637 = CARTESIAN_POINT('',(166.271966,-78.279131,1.585)); +#200638 = LINE('',#200639,#200640); +#200639 = CARTESIAN_POINT('',(166.347602,-78.206604,1.585)); +#200640 = VECTOR('',#200641,1.); +#200641 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#200642 = ORIENTED_EDGE('',*,*,#200643,.T.); +#200643 = EDGE_CURVE('',#200636,#200644,#200646,.T.); +#200644 = VERTEX_POINT('',#200645); +#200645 = CARTESIAN_POINT('',(166.156697,-78.33597,1.585)); +#200646 = LINE('',#200647,#200648); +#200647 = CARTESIAN_POINT('',(166.271966,-78.279131,1.585)); +#200648 = VECTOR('',#200649,1.); +#200649 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#200650 = ORIENTED_EDGE('',*,*,#200651,.T.); +#200651 = EDGE_CURVE('',#200644,#200652,#200654,.T.); +#200652 = VERTEX_POINT('',#200653); +#200653 = CARTESIAN_POINT('',(166.103347,-78.196551,1.585)); +#200654 = CIRCLE('',#200655,7.500005272361E-02); +#200655 = AXIS2_PLACEMENT_3D('',#200656,#200657,#200658); +#200656 = CARTESIAN_POINT('',(166.13688755676,-78.26363332972,1.585)); +#200657 = DIRECTION('',(0.,0.,-1.)); +#200658 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#200659 = ORIENTED_EDGE('',*,*,#200660,.T.); +#200660 = EDGE_CURVE('',#200652,#200661,#200663,.T.); +#200661 = VERTEX_POINT('',#200662); +#200662 = CARTESIAN_POINT('',(166.187699,-78.154375,1.585)); +#200663 = LINE('',#200664,#200665); +#200664 = CARTESIAN_POINT('',(166.103347,-78.196551,1.585)); +#200665 = VECTOR('',#200666,1.); +#200666 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#200667 = ORIENTED_EDGE('',*,*,#200668,.T.); +#200668 = EDGE_CURVE('',#200661,#200669,#200671,.T.); +#200669 = VERTEX_POINT('',#200670); +#200670 = CARTESIAN_POINT('',(166.269078,-78.072996,1.585)); +#200671 = LINE('',#200672,#200673); +#200672 = CARTESIAN_POINT('',(166.187699,-78.154375,1.585)); +#200673 = VECTOR('',#200674,1.); +#200674 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200675 = ORIENTED_EDGE('',*,*,#200676,.T.); +#200676 = EDGE_CURVE('',#200669,#200528,#200677,.T.); +#200677 = LINE('',#200678,#200679); +#200678 = CARTESIAN_POINT('',(166.269078,-78.072996,1.585)); +#200679 = VECTOR('',#200680,1.); +#200680 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#200681 = PLANE('',#200682); +#200682 = AXIS2_PLACEMENT_3D('',#200683,#200684,#200685); +#200683 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200684 = DIRECTION('',(0.,0.,1.)); +#200685 = DIRECTION('',(1.,0.,-0.)); +#200686 = SHELL_BASED_SURFACE_MODEL('',(#200687)); +#200687 = OPEN_SHELL('',(#200688)); +#200688 = ADVANCED_FACE('',(#200689),#200775,.T.); +#200689 = FACE_BOUND('',#200690,.F.); +#200690 = EDGE_LOOP('',(#200691,#200702,#200710,#200719,#200727,#200736, + #200744,#200753,#200761,#200769)); +#200691 = ORIENTED_EDGE('',*,*,#200692,.T.); +#200692 = EDGE_CURVE('',#200693,#200695,#200697,.T.); +#200693 = VERTEX_POINT('',#200694); +#200694 = CARTESIAN_POINT('',(164.666648,-77.915559,1.585)); +#200695 = VERTEX_POINT('',#200696); +#200696 = CARTESIAN_POINT('',(164.783316,-77.977919,1.585)); +#200697 = CIRCLE('',#200698,7.500000000003E-02); +#200698 = AXIS2_PLACEMENT_3D('',#200699,#200700,#200701); +#200699 = CARTESIAN_POINT('',(164.708316,-77.97791906555,1.585)); +#200700 = DIRECTION('',(0.,0.,-1.)); +#200701 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#200702 = ORIENTED_EDGE('',*,*,#200703,.T.); +#200703 = EDGE_CURVE('',#200695,#200704,#200706,.T.); +#200704 = VERTEX_POINT('',#200705); +#200705 = CARTESIAN_POINT('',(164.781116,-78.708666,1.585)); +#200706 = LINE('',#200707,#200708); +#200707 = CARTESIAN_POINT('',(164.783316,-77.977919,1.585)); +#200708 = VECTOR('',#200709,1.); +#200709 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#200710 = ORIENTED_EDGE('',*,*,#200711,.T.); +#200711 = EDGE_CURVE('',#200704,#200712,#200714,.T.); +#200712 = VERTEX_POINT('',#200713); +#200713 = CARTESIAN_POINT('',(164.430007,-79.052189,1.585)); +#200714 = CIRCLE('',#200715,0.38184101318); +#200715 = AXIS2_PLACEMENT_3D('',#200716,#200717,#200718); +#200716 = CARTESIAN_POINT('',(164.40109350032,-78.67144424444,1.585)); +#200717 = DIRECTION('',(0.,0.,-1.)); +#200718 = DIRECTION('',(0.995237511316,-9.747972132579E-02,0.)); +#200719 = ORIENTED_EDGE('',*,*,#200720,.T.); +#200720 = EDGE_CURVE('',#200712,#200721,#200723,.T.); +#200721 = VERTEX_POINT('',#200722); +#200722 = CARTESIAN_POINT('',(164.312732,-79.051478,1.585)); +#200723 = LINE('',#200724,#200725); +#200724 = CARTESIAN_POINT('',(164.430007,-79.052189,1.585)); +#200725 = VECTOR('',#200726,1.); +#200726 = DIRECTION('',(-0.999981622503,6.062561787214E-03,0.)); +#200727 = ORIENTED_EDGE('',*,*,#200728,.T.); +#200728 = EDGE_CURVE('',#200721,#200729,#200731,.T.); +#200729 = VERTEX_POINT('',#200730); +#200730 = CARTESIAN_POINT('',(164.327364,-78.902919,1.585)); +#200731 = CIRCLE('',#200732,7.500006711465E-02); +#200732 = AXIS2_PLACEMENT_3D('',#200733,#200734,#200735); +#200733 = CARTESIAN_POINT('',(164.32736393288,-78.97791906711,1.585)); +#200734 = DIRECTION('',(0.,0.,-1.)); +#200735 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#200736 = ORIENTED_EDGE('',*,*,#200737,.T.); +#200737 = EDGE_CURVE('',#200729,#200738,#200740,.T.); +#200738 = VERTEX_POINT('',#200739); +#200739 = CARTESIAN_POINT('',(164.410432,-78.902919,1.585)); +#200740 = LINE('',#200741,#200742); +#200741 = CARTESIAN_POINT('',(164.327364,-78.902919,1.585)); +#200742 = VECTOR('',#200743,1.); +#200743 = DIRECTION('',(1.,0.,0.)); +#200744 = ORIENTED_EDGE('',*,*,#200745,.T.); +#200745 = EDGE_CURVE('',#200738,#200746,#200748,.T.); +#200746 = VERTEX_POINT('',#200747); +#200747 = CARTESIAN_POINT('',(164.633316,-78.680034,1.585)); +#200748 = CIRCLE('',#200749,0.239437351684); +#200749 = AXIS2_PLACEMENT_3D('',#200750,#200751,#200752); +#200750 = CARTESIAN_POINT('',(164.39441490658,-78.66401797844,1.585)); +#200751 = DIRECTION('',(0.,0.,1.)); +#200752 = DIRECTION('',(6.689471506001E-02,-0.997760039838,0.)); +#200753 = ORIENTED_EDGE('',*,*,#200754,.T.); +#200754 = EDGE_CURVE('',#200746,#200755,#200757,.T.); +#200755 = VERTEX_POINT('',#200756); +#200756 = CARTESIAN_POINT('',(164.634757,-77.963287,1.585)); +#200757 = LINE('',#200758,#200759); +#200758 = CARTESIAN_POINT('',(164.633316,-78.680034,1.585)); +#200759 = VECTOR('',#200760,1.); +#200760 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#200761 = ORIENTED_EDGE('',*,*,#200762,.T.); +#200762 = EDGE_CURVE('',#200755,#200763,#200765,.T.); +#200763 = VERTEX_POINT('',#200764); +#200764 = CARTESIAN_POINT('',(164.645956,-77.936251,1.585)); +#200765 = LINE('',#200766,#200767); +#200766 = CARTESIAN_POINT('',(164.634757,-77.963287,1.585)); +#200767 = VECTOR('',#200768,1.); +#200768 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200769 = ORIENTED_EDGE('',*,*,#200770,.T.); +#200770 = EDGE_CURVE('',#200763,#200693,#200771,.T.); +#200771 = LINE('',#200772,#200773); +#200772 = CARTESIAN_POINT('',(164.645956,-77.936251,1.585)); +#200773 = VECTOR('',#200774,1.); +#200774 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200775 = PLANE('',#200776); +#200776 = AXIS2_PLACEMENT_3D('',#200777,#200778,#200779); +#200777 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200778 = DIRECTION('',(0.,0.,1.)); +#200779 = DIRECTION('',(1.,0.,-0.)); +#200780 = SHELL_BASED_SURFACE_MODEL('',(#200781)); +#200781 = OPEN_SHELL('',(#200782)); +#200782 = ADVANCED_FACE('',(#200783,#200861),#200913,.T.); +#200783 = FACE_BOUND('',#200784,.F.); +#200784 = EDGE_LOOP('',(#200785,#200796,#200804,#200813,#200821,#200830, + #200838,#200846,#200855)); +#200785 = ORIENTED_EDGE('',*,*,#200786,.T.); +#200786 = EDGE_CURVE('',#200787,#200789,#200791,.T.); +#200787 = VERTEX_POINT('',#200788); +#200788 = CARTESIAN_POINT('',(165.110948,-77.963287,1.585)); +#200789 = VERTEX_POINT('',#200790); +#200790 = CARTESIAN_POINT('',(165.184507,-77.902919,1.585)); +#200791 = CIRCLE('',#200792,7.500074938986E-02); +#200792 = AXIS2_PLACEMENT_3D('',#200793,#200794,#200795); +#200793 = CARTESIAN_POINT('',(165.18450746611,-77.97791974938,1.585)); +#200794 = DIRECTION('',(0.,0.,-1.)); +#200795 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#200796 = ORIENTED_EDGE('',*,*,#200797,.T.); +#200797 = EDGE_CURVE('',#200789,#200798,#200800,.T.); +#200798 = VERTEX_POINT('',#200799); +#200799 = CARTESIAN_POINT('',(165.580091,-77.90436,1.585)); +#200800 = LINE('',#200801,#200802); +#200801 = CARTESIAN_POINT('',(165.184507,-77.902919,1.585)); +#200802 = VECTOR('',#200803,1.); +#200803 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#200804 = ORIENTED_EDGE('',*,*,#200805,.T.); +#200805 = EDGE_CURVE('',#200798,#200806,#200808,.T.); +#200806 = VERTEX_POINT('',#200807); +#200807 = CARTESIAN_POINT('',(165.829494,-78.153763,1.585)); +#200808 = CIRCLE('',#200809,0.347870264855); +#200809 = AXIS2_PLACEMENT_3D('',#200810,#200811,#200812); +#200810 = CARTESIAN_POINT('',(165.49276326502,-78.24109073497,1.585)); +#200811 = DIRECTION('',(0.,0.,-1.)); +#200812 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#200813 = ORIENTED_EDGE('',*,*,#200814,.T.); +#200814 = EDGE_CURVE('',#200806,#200815,#200817,.T.); +#200815 = VERTEX_POINT('',#200816); +#200816 = CARTESIAN_POINT('',(165.828272,-78.331062,1.585)); +#200817 = LINE('',#200818,#200819); +#200818 = CARTESIAN_POINT('',(165.829494,-78.153763,1.585)); +#200819 = VECTOR('',#200820,1.); +#200820 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#200821 = ORIENTED_EDGE('',*,*,#200822,.T.); +#200822 = EDGE_CURVE('',#200815,#200823,#200825,.T.); +#200823 = VERTEX_POINT('',#200824); +#200824 = CARTESIAN_POINT('',(165.580091,-78.575287,1.585)); +#200825 = CIRCLE('',#200826,0.348632345849); +#200826 = AXIS2_PLACEMENT_3D('',#200827,#200828,#200829); +#200827 = CARTESIAN_POINT('',(165.49232219403,-78.2378834593,1.585)); +#200828 = DIRECTION('',(0.,0.,-1.)); +#200829 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#200830 = ORIENTED_EDGE('',*,*,#200831,.T.); +#200831 = EDGE_CURVE('',#200823,#200832,#200834,.T.); +#200832 = VERTEX_POINT('',#200833); +#200833 = CARTESIAN_POINT('',(165.259507,-78.576728,1.585)); +#200834 = LINE('',#200835,#200836); +#200835 = CARTESIAN_POINT('',(165.580091,-78.575287,1.585)); +#200836 = VECTOR('',#200837,1.); +#200837 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#200838 = ORIENTED_EDGE('',*,*,#200839,.T.); +#200839 = EDGE_CURVE('',#200832,#200840,#200842,.T.); +#200840 = VERTEX_POINT('',#200841); +#200841 = CARTESIAN_POINT('',(165.258066,-78.992551,1.585)); +#200842 = LINE('',#200843,#200844); +#200843 = CARTESIAN_POINT('',(165.259507,-78.576728,1.585)); +#200844 = VECTOR('',#200845,1.); +#200845 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#200846 = ORIENTED_EDGE('',*,*,#200847,.T.); +#200847 = EDGE_CURVE('',#200840,#200848,#200850,.T.); +#200848 = VERTEX_POINT('',#200849); +#200849 = CARTESIAN_POINT('',(165.109507,-78.977919,1.585)); +#200850 = CIRCLE('',#200851,7.500006711464E-02); +#200851 = AXIS2_PLACEMENT_3D('',#200852,#200853,#200854); +#200852 = CARTESIAN_POINT('',(165.18450706711,-78.97791906711,1.585)); +#200853 = DIRECTION('',(-0.,0.,-1.)); +#200854 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#200855 = ORIENTED_EDGE('',*,*,#200856,.T.); +#200856 = EDGE_CURVE('',#200848,#200787,#200857,.T.); +#200857 = LINE('',#200858,#200859); +#200858 = CARTESIAN_POINT('',(165.109507,-78.977919,1.585)); +#200859 = VECTOR('',#200860,1.); +#200860 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#200861 = FACE_BOUND('',#200862,.F.); +#200862 = EDGE_LOOP('',(#200863,#200874,#200882,#200890,#200898,#200907) + ); +#200863 = ORIENTED_EDGE('',*,*,#200864,.T.); +#200864 = EDGE_CURVE('',#200865,#200867,#200869,.T.); +#200865 = VERTEX_POINT('',#200866); +#200866 = CARTESIAN_POINT('',(165.680935,-78.1861,1.585)); +#200867 = VERTEX_POINT('',#200868); +#200868 = CARTESIAN_POINT('',(165.547754,-78.052919,1.585)); +#200869 = CIRCLE('',#200870,0.18686440374); +#200870 = AXIS2_PLACEMENT_3D('',#200871,#200872,#200873); +#200871 = CARTESIAN_POINT('',(165.500218,-78.233636,1.585)); +#200872 = DIRECTION('',(0.,0.,1.)); +#200873 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#200874 = ORIENTED_EDGE('',*,*,#200875,.T.); +#200875 = EDGE_CURVE('',#200867,#200876,#200878,.T.); +#200876 = VERTEX_POINT('',#200877); +#200877 = CARTESIAN_POINT('',(165.259507,-78.052919,1.585)); +#200878 = LINE('',#200879,#200880); +#200879 = CARTESIAN_POINT('',(165.547754,-78.052919,1.585)); +#200880 = VECTOR('',#200881,1.); +#200881 = DIRECTION('',(-1.,0.,0.)); +#200882 = ORIENTED_EDGE('',*,*,#200883,.T.); +#200883 = EDGE_CURVE('',#200876,#200884,#200886,.T.); +#200884 = VERTEX_POINT('',#200885); +#200885 = CARTESIAN_POINT('',(165.259507,-78.426728,1.585)); +#200886 = LINE('',#200887,#200888); +#200887 = CARTESIAN_POINT('',(165.259507,-78.052919,1.585)); +#200888 = VECTOR('',#200889,1.); +#200889 = DIRECTION('',(0.,-1.,0.)); +#200890 = ORIENTED_EDGE('',*,*,#200891,.T.); +#200891 = EDGE_CURVE('',#200884,#200892,#200894,.T.); +#200892 = VERTEX_POINT('',#200893); +#200893 = CARTESIAN_POINT('',(165.547754,-78.426728,1.585)); +#200894 = LINE('',#200895,#200896); +#200895 = CARTESIAN_POINT('',(165.259507,-78.426728,1.585)); +#200896 = VECTOR('',#200897,1.); +#200897 = DIRECTION('',(1.,0.,0.)); +#200898 = ORIENTED_EDGE('',*,*,#200899,.T.); +#200899 = EDGE_CURVE('',#200892,#200900,#200902,.T.); +#200900 = VERTEX_POINT('',#200901); +#200901 = CARTESIAN_POINT('',(165.680935,-78.293547,1.585)); +#200902 = CIRCLE('',#200903,0.18686440374); +#200903 = AXIS2_PLACEMENT_3D('',#200904,#200905,#200906); +#200904 = CARTESIAN_POINT('',(165.500218,-78.246011,1.585)); +#200905 = DIRECTION('',(0.,0.,1.)); +#200906 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#200907 = ORIENTED_EDGE('',*,*,#200908,.T.); +#200908 = EDGE_CURVE('',#200900,#200865,#200909,.T.); +#200909 = LINE('',#200910,#200911); +#200910 = CARTESIAN_POINT('',(165.680935,-78.293547,1.585)); +#200911 = VECTOR('',#200912,1.); +#200912 = DIRECTION('',(0.,1.,0.)); +#200913 = PLANE('',#200914); +#200914 = AXIS2_PLACEMENT_3D('',#200915,#200916,#200917); +#200915 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200916 = DIRECTION('',(0.,0.,1.)); +#200917 = DIRECTION('',(1.,0.,-0.)); +#200918 = SHELL_BASED_SURFACE_MODEL('',(#200919)); +#200919 = OPEN_SHELL('',(#200920)); +#200920 = ADVANCED_FACE('',(#200921),#201048,.T.); +#200921 = FACE_BOUND('',#200922,.F.); +#200922 = EDGE_LOOP('',(#200923,#200934,#200942,#200950,#200958,#200966, + #200975,#200983,#200991,#200999,#201008,#201016,#201025,#201033, + #201042)); +#200923 = ORIENTED_EDGE('',*,*,#200924,.T.); +#200924 = EDGE_CURVE('',#200925,#200927,#200929,.T.); +#200925 = VERTEX_POINT('',#200926); +#200926 = CARTESIAN_POINT('',(119.359597,-78.486428,1.585)); +#200927 = VERTEX_POINT('',#200928); +#200928 = CARTESIAN_POINT('',(119.359597,-78.356428,1.585)); +#200929 = CIRCLE('',#200930,6.500000000092E-02); +#200930 = AXIS2_PLACEMENT_3D('',#200931,#200932,#200933); +#200931 = CARTESIAN_POINT('',(119.35959734486,-78.421428,1.585)); +#200932 = DIRECTION('',(0.,0.,-1.)); +#200933 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#200934 = ORIENTED_EDGE('',*,*,#200935,.T.); +#200935 = EDGE_CURVE('',#200927,#200936,#200938,.T.); +#200936 = VERTEX_POINT('',#200937); +#200937 = CARTESIAN_POINT('',(120.091361,-78.357063,1.585)); +#200938 = LINE('',#200939,#200940); +#200939 = CARTESIAN_POINT('',(119.359597,-78.356428,1.585)); +#200940 = VECTOR('',#200941,1.); +#200941 = DIRECTION('',(0.999999623491,-8.677657836673E-04,0.)); +#200942 = ORIENTED_EDGE('',*,*,#200943,.T.); +#200943 = EDGE_CURVE('',#200936,#200944,#200946,.T.); +#200944 = VERTEX_POINT('',#200945); +#200945 = CARTESIAN_POINT('',(120.117237,-78.36329,1.585)); +#200946 = LINE('',#200947,#200948); +#200947 = CARTESIAN_POINT('',(120.091361,-78.357063,1.585)); +#200948 = VECTOR('',#200949,1.); +#200949 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#200950 = ORIENTED_EDGE('',*,*,#200951,.T.); +#200951 = EDGE_CURVE('',#200944,#200952,#200954,.T.); +#200952 = VERTEX_POINT('',#200953); +#200953 = CARTESIAN_POINT('',(120.219843,-78.418323,1.585)); +#200954 = LINE('',#200955,#200956); +#200955 = CARTESIAN_POINT('',(120.117237,-78.36329,1.585)); +#200956 = VECTOR('',#200957,1.); +#200957 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#200958 = ORIENTED_EDGE('',*,*,#200959,.T.); +#200959 = EDGE_CURVE('',#200952,#200960,#200962,.T.); +#200960 = VERTEX_POINT('',#200961); +#200961 = CARTESIAN_POINT('',(120.274878,-78.478073,1.585)); +#200962 = LINE('',#200963,#200964); +#200963 = CARTESIAN_POINT('',(120.219843,-78.418323,1.585)); +#200964 = VECTOR('',#200965,1.); +#200965 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#200966 = ORIENTED_EDGE('',*,*,#200967,.T.); +#200967 = EDGE_CURVE('',#200960,#200968,#200970,.T.); +#200968 = VERTEX_POINT('',#200969); +#200969 = CARTESIAN_POINT('',(120.268491,-78.887297,1.585)); +#200970 = CIRCLE('',#200971,0.358409955812); +#200971 = AXIS2_PLACEMENT_3D('',#200972,#200973,#200974); +#200972 = CARTESIAN_POINT('',(119.97747311066,-78.67809306955,1.585)); +#200973 = DIRECTION('',(0.,0.,-1.)); +#200974 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#200975 = ORIENTED_EDGE('',*,*,#200976,.T.); +#200976 = EDGE_CURVE('',#200968,#200977,#200979,.T.); +#200977 = VERTEX_POINT('',#200978); +#200978 = CARTESIAN_POINT('',(120.211186,-78.944603,1.585)); +#200979 = LINE('',#200980,#200981); +#200980 = CARTESIAN_POINT('',(120.268491,-78.887297,1.585)); +#200981 = VECTOR('',#200982,1.); +#200982 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#200983 = ORIENTED_EDGE('',*,*,#200984,.T.); +#200984 = EDGE_CURVE('',#200977,#200985,#200987,.T.); +#200985 = VERTEX_POINT('',#200986); +#200986 = CARTESIAN_POINT('',(120.102824,-78.997798,1.585)); +#200987 = LINE('',#200988,#200989); +#200988 = CARTESIAN_POINT('',(120.211186,-78.944603,1.585)); +#200989 = VECTOR('',#200990,1.); +#200990 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#200991 = ORIENTED_EDGE('',*,*,#200992,.T.); +#200992 = EDGE_CURVE('',#200985,#200993,#200995,.T.); +#200993 = VERTEX_POINT('',#200994); +#200994 = CARTESIAN_POINT('',(119.359597,-79.000714,1.585)); +#200995 = LINE('',#200996,#200997); +#200996 = CARTESIAN_POINT('',(120.102824,-78.997798,1.585)); +#200997 = VECTOR('',#200998,1.); +#200998 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#200999 = ORIENTED_EDGE('',*,*,#201000,.T.); +#201000 = EDGE_CURVE('',#200993,#201001,#201003,.T.); +#201001 = VERTEX_POINT('',#201002); +#201002 = CARTESIAN_POINT('',(119.359597,-78.870714,1.585)); +#201003 = CIRCLE('',#201004,6.500000000091E-02); +#201004 = AXIS2_PLACEMENT_3D('',#201005,#201006,#201007); +#201005 = CARTESIAN_POINT('',(119.35959734486,-78.935714,1.585)); +#201006 = DIRECTION('',(0.,0.,-1.)); +#201007 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#201008 = ORIENTED_EDGE('',*,*,#201009,.T.); +#201009 = EDGE_CURVE('',#201001,#201010,#201012,.T.); +#201010 = VERTEX_POINT('',#201011); +#201011 = CARTESIAN_POINT('',(120.072823,-78.870714,1.585)); +#201012 = LINE('',#201013,#201014); +#201013 = CARTESIAN_POINT('',(119.359597,-78.870714,1.585)); +#201014 = VECTOR('',#201015,1.); +#201015 = DIRECTION('',(1.,0.,0.)); +#201016 = ORIENTED_EDGE('',*,*,#201017,.T.); +#201017 = EDGE_CURVE('',#201010,#201018,#201020,.T.); +#201018 = VERTEX_POINT('',#201019); +#201019 = CARTESIAN_POINT('',(120.194597,-78.74894,1.585)); +#201020 = CIRCLE('',#201021,0.170996196456); +#201021 = AXIS2_PLACEMENT_3D('',#201022,#201023,#201024); +#201022 = CARTESIAN_POINT('',(120.0292465,-78.7053635,1.585)); +#201023 = DIRECTION('',(0.,0.,1.)); +#201024 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#201025 = ORIENTED_EDGE('',*,*,#201026,.T.); +#201026 = EDGE_CURVE('',#201018,#201027,#201029,.T.); +#201027 = VERTEX_POINT('',#201028); +#201028 = CARTESIAN_POINT('',(120.194597,-78.608201,1.585)); +#201029 = LINE('',#201030,#201031); +#201030 = CARTESIAN_POINT('',(120.194597,-78.74894,1.585)); +#201031 = VECTOR('',#201032,1.); +#201032 = DIRECTION('',(0.,1.,0.)); +#201033 = ORIENTED_EDGE('',*,*,#201034,.T.); +#201034 = EDGE_CURVE('',#201027,#201035,#201037,.T.); +#201035 = VERTEX_POINT('',#201036); +#201036 = CARTESIAN_POINT('',(120.072823,-78.486428,1.585)); +#201037 = CIRCLE('',#201038,0.170997370267); +#201038 = AXIS2_PLACEMENT_3D('',#201039,#201040,#201041); +#201039 = CARTESIAN_POINT('',(120.02924582251,-78.65177953534,1.585)); +#201040 = DIRECTION('',(0.,0.,1.)); +#201041 = DIRECTION('',(0.966980820969,0.254849155143,-0.)); +#201042 = ORIENTED_EDGE('',*,*,#201043,.T.); +#201043 = EDGE_CURVE('',#201035,#200925,#201044,.T.); +#201044 = LINE('',#201045,#201046); +#201045 = CARTESIAN_POINT('',(120.072823,-78.486428,1.585)); +#201046 = VECTOR('',#201047,1.); +#201047 = DIRECTION('',(-1.,0.,0.)); +#201048 = PLANE('',#201049); +#201049 = AXIS2_PLACEMENT_3D('',#201050,#201051,#201052); +#201050 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201051 = DIRECTION('',(0.,0.,1.)); +#201052 = DIRECTION('',(1.,0.,-0.)); +#201053 = SHELL_BASED_SURFACE_MODEL('',(#201054)); +#201054 = OPEN_SHELL('',(#201055)); +#201055 = ADVANCED_FACE('',(#201056),#201226,.T.); +#201056 = FACE_BOUND('',#201057,.F.); +#201057 = EDGE_LOOP('',(#201058,#201069,#201077,#201086,#201094,#201103, + #201111,#201119,#201127,#201136,#201144,#201153,#201161,#201170, + #201178,#201187,#201195,#201203,#201211,#201220)); +#201058 = ORIENTED_EDGE('',*,*,#201059,.T.); +#201059 = EDGE_CURVE('',#201060,#201062,#201064,.T.); +#201060 = VERTEX_POINT('',#201061); +#201061 = CARTESIAN_POINT('',(132.149349,-78.282609,1.585)); +#201062 = VERTEX_POINT('',#201063); +#201063 = CARTESIAN_POINT('',(132.241273,-78.374533,1.585)); +#201064 = CIRCLE('',#201065,6.50000837538E-02); +#201065 = AXIS2_PLACEMENT_3D('',#201066,#201067,#201068); +#201066 = CARTESIAN_POINT('',(132.19531098493,-78.32857101506,1.585)); +#201067 = DIRECTION('',(0.,0.,-1.)); +#201068 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#201069 = ORIENTED_EDGE('',*,*,#201070,.T.); +#201070 = EDGE_CURVE('',#201062,#201071,#201073,.T.); +#201071 = VERTEX_POINT('',#201072); +#201072 = CARTESIAN_POINT('',(132.209266,-78.406539,1.585)); +#201073 = LINE('',#201074,#201075); +#201074 = CARTESIAN_POINT('',(132.241273,-78.374533,1.585)); +#201075 = VECTOR('',#201076,1.); +#201076 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#201077 = ORIENTED_EDGE('',*,*,#201078,.T.); +#201078 = EDGE_CURVE('',#201071,#201079,#201081,.T.); +#201079 = VERTEX_POINT('',#201080); +#201080 = CARTESIAN_POINT('',(132.209265,-78.679172,1.585)); +#201081 = CIRCLE('',#201082,0.272201331757); +#201082 = AXIS2_PLACEMENT_3D('',#201083,#201084,#201085); +#201083 = CARTESIAN_POINT('',(132.44487402454,-78.54285636419,1.585)); +#201084 = DIRECTION('',(0.,0.,1.)); +#201085 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#201086 = ORIENTED_EDGE('',*,*,#201087,.T.); +#201087 = EDGE_CURVE('',#201079,#201088,#201090,.T.); +#201088 = VERTEX_POINT('',#201089); +#201089 = CARTESIAN_POINT('',(132.276669,-78.746578,1.585)); +#201090 = LINE('',#201091,#201092); +#201091 = CARTESIAN_POINT('',(132.209265,-78.679172,1.585)); +#201092 = VECTOR('',#201093,1.); +#201093 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#201094 = ORIENTED_EDGE('',*,*,#201095,.T.); +#201095 = EDGE_CURVE('',#201088,#201096,#201098,.T.); +#201096 = VERTEX_POINT('',#201097); +#201097 = CARTESIAN_POINT('',(132.615881,-78.820714,1.585)); +#201098 = CIRCLE('',#201099,0.553317785495); +#201099 = AXIS2_PLACEMENT_3D('',#201100,#201101,#201102); +#201100 = CARTESIAN_POINT('',(132.5584500839,-78.27038476979,1.585)); +#201101 = DIRECTION('',(0.,0.,1.)); +#201102 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#201103 = ORIENTED_EDGE('',*,*,#201104,.T.); +#201104 = EDGE_CURVE('',#201096,#201105,#201107,.T.); +#201105 = VERTEX_POINT('',#201106); +#201106 = CARTESIAN_POINT('',(132.772622,-78.781528,1.585)); +#201107 = LINE('',#201108,#201109); +#201108 = CARTESIAN_POINT('',(132.615881,-78.820714,1.585)); +#201109 = VECTOR('',#201110,1.); +#201110 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#201111 = ORIENTED_EDGE('',*,*,#201112,.T.); +#201112 = EDGE_CURVE('',#201105,#201113,#201115,.T.); +#201113 = VERTEX_POINT('',#201114); +#201114 = CARTESIAN_POINT('',(132.842522,-78.746579,1.585)); +#201115 = LINE('',#201116,#201117); +#201116 = CARTESIAN_POINT('',(132.772622,-78.781528,1.585)); +#201117 = VECTOR('',#201118,1.); +#201118 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#201119 = ORIENTED_EDGE('',*,*,#201120,.T.); +#201120 = EDGE_CURVE('',#201113,#201121,#201123,.T.); +#201121 = VERTEX_POINT('',#201122); +#201122 = CARTESIAN_POINT('',(132.909928,-78.679172,1.585)); +#201123 = LINE('',#201124,#201125); +#201124 = CARTESIAN_POINT('',(132.842522,-78.746579,1.585)); +#201125 = VECTOR('',#201126,1.); +#201126 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#201127 = ORIENTED_EDGE('',*,*,#201128,.T.); +#201128 = EDGE_CURVE('',#201121,#201129,#201131,.T.); +#201129 = VERTEX_POINT('',#201130); +#201130 = CARTESIAN_POINT('',(132.909928,-78.40654,1.585)); +#201131 = CIRCLE('',#201132,0.272194686174); +#201132 = AXIS2_PLACEMENT_3D('',#201133,#201134,#201135); +#201133 = CARTESIAN_POINT('',(132.67432686391,-78.542856,1.585)); +#201134 = DIRECTION('',(0.,-0.,1.)); +#201135 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#201136 = ORIENTED_EDGE('',*,*,#201137,.T.); +#201137 = EDGE_CURVE('',#201129,#201138,#201140,.T.); +#201138 = VERTEX_POINT('',#201139); +#201139 = CARTESIAN_POINT('',(132.877921,-78.374533,1.585)); +#201140 = LINE('',#201141,#201142); +#201141 = CARTESIAN_POINT('',(132.909928,-78.40654,1.585)); +#201142 = VECTOR('',#201143,1.); +#201143 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#201144 = ORIENTED_EDGE('',*,*,#201145,.T.); +#201145 = EDGE_CURVE('',#201138,#201146,#201148,.T.); +#201146 = VERTEX_POINT('',#201147); +#201147 = CARTESIAN_POINT('',(132.969843,-78.282609,1.585)); +#201148 = CIRCLE('',#201149,6.499937665169E-02); +#201149 = AXIS2_PLACEMENT_3D('',#201150,#201151,#201152); +#201150 = CARTESIAN_POINT('',(132.92388176676,-78.32857076677,1.585)); +#201151 = DIRECTION('',(0.,0.,-1.)); +#201152 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#201153 = ORIENTED_EDGE('',*,*,#201154,.T.); +#201154 = EDGE_CURVE('',#201146,#201155,#201157,.T.); +#201155 = VERTEX_POINT('',#201156); +#201156 = CARTESIAN_POINT('',(133.021003,-78.33789,1.585)); +#201157 = LINE('',#201158,#201159); +#201158 = CARTESIAN_POINT('',(132.969843,-78.282609,1.585)); +#201159 = VECTOR('',#201160,1.); +#201160 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#201161 = ORIENTED_EDGE('',*,*,#201162,.T.); +#201162 = EDGE_CURVE('',#201155,#201163,#201165,.T.); +#201163 = VERTEX_POINT('',#201164); +#201164 = CARTESIAN_POINT('',(133.020999,-78.747828,1.585)); +#201165 = CIRCLE('',#201166,0.409312568567); +#201166 = AXIS2_PLACEMENT_3D('',#201167,#201168,#201169); +#201167 = CARTESIAN_POINT('',(132.66670664807,-78.54285554294,1.585)); +#201168 = DIRECTION('',(0.,0.,-1.)); +#201169 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#201170 = ORIENTED_EDGE('',*,*,#201171,.T.); +#201171 = EDGE_CURVE('',#201163,#201172,#201174,.T.); +#201172 = VERTEX_POINT('',#201173); +#201173 = CARTESIAN_POINT('',(132.918322,-78.851751,1.585)); +#201174 = LINE('',#201175,#201176); +#201175 = CARTESIAN_POINT('',(133.020999,-78.747828,1.585)); +#201176 = VECTOR('',#201177,1.); +#201177 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#201178 = ORIENTED_EDGE('',*,*,#201179,.T.); +#201179 = EDGE_CURVE('',#201172,#201180,#201182,.T.); +#201180 = VERTEX_POINT('',#201181); +#201181 = CARTESIAN_POINT('',(132.479546,-78.948773,1.585)); +#201182 = CIRCLE('',#201183,0.675422176573); +#201183 = AXIS2_PLACEMENT_3D('',#201184,#201185,#201186); +#201184 = CARTESIAN_POINT('',(132.56141275007,-78.27833064465,1.585)); +#201185 = DIRECTION('',(0.,0.,-1.)); +#201186 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#201187 = ORIENTED_EDGE('',*,*,#201188,.T.); +#201188 = EDGE_CURVE('',#201180,#201189,#201191,.T.); +#201189 = VERTEX_POINT('',#201190); +#201190 = CARTESIAN_POINT('',(132.294813,-78.900995,1.585)); +#201191 = LINE('',#201192,#201193); +#201192 = CARTESIAN_POINT('',(132.479546,-78.948773,1.585)); +#201193 = VECTOR('',#201194,1.); +#201194 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#201195 = ORIENTED_EDGE('',*,*,#201196,.T.); +#201196 = EDGE_CURVE('',#201189,#201197,#201199,.T.); +#201197 = VERTEX_POINT('',#201198); +#201198 = CARTESIAN_POINT('',(132.192206,-78.845962,1.585)); +#201199 = LINE('',#201200,#201201); +#201200 = CARTESIAN_POINT('',(132.294813,-78.900995,1.585)); +#201201 = VECTOR('',#201202,1.); +#201202 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#201203 = ORIENTED_EDGE('',*,*,#201204,.T.); +#201204 = EDGE_CURVE('',#201197,#201205,#201207,.T.); +#201205 = VERTEX_POINT('',#201206); +#201206 = CARTESIAN_POINT('',(132.098191,-78.747824,1.585)); +#201207 = LINE('',#201208,#201209); +#201208 = CARTESIAN_POINT('',(132.192206,-78.845962,1.585)); +#201209 = VECTOR('',#201210,1.); +#201210 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#201211 = ORIENTED_EDGE('',*,*,#201212,.T.); +#201212 = EDGE_CURVE('',#201205,#201213,#201215,.T.); +#201213 = VERTEX_POINT('',#201214); +#201214 = CARTESIAN_POINT('',(132.098194,-78.337884,1.585)); +#201215 = CIRCLE('',#201216,0.40931290975); +#201216 = AXIS2_PLACEMENT_3D('',#201217,#201218,#201219); +#201217 = CARTESIAN_POINT('',(132.45248666757,-78.54285659277,1.585)); +#201218 = DIRECTION('',(0.,0.,-1.)); +#201219 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#201220 = ORIENTED_EDGE('',*,*,#201221,.T.); +#201221 = EDGE_CURVE('',#201213,#201060,#201222,.T.); +#201222 = LINE('',#201223,#201224); +#201223 = CARTESIAN_POINT('',(132.098194,-78.337884,1.585)); +#201224 = VECTOR('',#201225,1.); +#201225 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#201226 = PLANE('',#201227); +#201227 = AXIS2_PLACEMENT_3D('',#201228,#201229,#201230); +#201228 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201229 = DIRECTION('',(0.,0.,1.)); +#201230 = DIRECTION('',(1.,0.,-0.)); +#201231 = SHELL_BASED_SURFACE_MODEL('',(#201232)); +#201232 = OPEN_SHELL('',(#201233)); +#201233 = ADVANCED_FACE('',(#201234,#201336),#201406,.T.); +#201234 = FACE_BOUND('',#201235,.F.); +#201235 = EDGE_LOOP('',(#201236,#201246,#201255,#201263,#201271,#201280, + #201288,#201296,#201305,#201313,#201321,#201330)); +#201236 = ORIENTED_EDGE('',*,*,#201237,.T.); +#201237 = EDGE_CURVE('',#201238,#201240,#201242,.T.); +#201238 = VERTEX_POINT('',#201239); +#201239 = CARTESIAN_POINT('',(145.329472,-78.254916,1.585)); +#201240 = VERTEX_POINT('',#201241); +#201241 = CARTESIAN_POINT('',(145.352403,-78.244083,1.585)); +#201242 = LINE('',#201243,#201244); +#201243 = CARTESIAN_POINT('',(145.329472,-78.254916,1.585)); +#201244 = VECTOR('',#201245,1.); +#201245 = DIRECTION('',(0.904180546134,0.427150488695,0.)); +#201246 = ORIENTED_EDGE('',*,*,#201247,.T.); +#201247 = EDGE_CURVE('',#201240,#201248,#201250,.T.); +#201248 = VERTEX_POINT('',#201249); +#201249 = CARTESIAN_POINT('',(146.035899,-78.24709,1.585)); +#201250 = CIRCLE('',#201251,1.061569249271); +#201251 = AXIS2_PLACEMENT_3D('',#201252,#201253,#201254); +#201252 = CARTESIAN_POINT('',(145.68972936361,-79.25063165526,1.585)); +#201253 = DIRECTION('',(0.,0.,-1.)); +#201254 = DIRECTION('',(-0.317761996071,0.94817050885,0.)); +#201255 = ORIENTED_EDGE('',*,*,#201256,.T.); +#201256 = EDGE_CURVE('',#201248,#201257,#201259,.T.); +#201257 = VERTEX_POINT('',#201258); +#201258 = CARTESIAN_POINT('',(146.056987,-78.26118,1.585)); +#201259 = LINE('',#201260,#201261); +#201260 = CARTESIAN_POINT('',(146.035899,-78.24709,1.585)); +#201261 = VECTOR('',#201262,1.); +#201262 = DIRECTION('',(0.831479650115,-0.555555210078,0.)); +#201263 = ORIENTED_EDGE('',*,*,#201264,.T.); +#201264 = EDGE_CURVE('',#201257,#201265,#201267,.T.); +#201265 = VERTEX_POINT('',#201266); +#201266 = CARTESIAN_POINT('',(146.154878,-78.363787,1.585)); +#201267 = LINE('',#201268,#201269); +#201268 = CARTESIAN_POINT('',(146.056987,-78.26118,1.585)); +#201269 = VECTOR('',#201270,1.); +#201270 = DIRECTION('',(0.690283691379,-0.723538820947,0.)); +#201271 = ORIENTED_EDGE('',*,*,#201272,.T.); +#201272 = EDGE_CURVE('',#201265,#201273,#201275,.T.); +#201273 = VERTEX_POINT('',#201274); +#201274 = CARTESIAN_POINT('',(146.148491,-78.773011,1.585)); +#201275 = CIRCLE('',#201276,0.358409955812); +#201276 = AXIS2_PLACEMENT_3D('',#201277,#201278,#201279); +#201277 = CARTESIAN_POINT('',(145.85747311066,-78.56380706955,1.585)); +#201278 = DIRECTION('',(0.,0.,-1.)); +#201279 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#201280 = ORIENTED_EDGE('',*,*,#201281,.T.); +#201281 = EDGE_CURVE('',#201273,#201282,#201284,.T.); +#201282 = VERTEX_POINT('',#201283); +#201283 = CARTESIAN_POINT('',(146.049721,-78.873654,1.585)); +#201284 = LINE('',#201285,#201286); +#201285 = CARTESIAN_POINT('',(146.148491,-78.773011,1.585)); +#201286 = VECTOR('',#201287,1.); +#201287 = DIRECTION('',(-0.700434337649,-0.713716847666,0.)); +#201288 = ORIENTED_EDGE('',*,*,#201289,.T.); +#201289 = EDGE_CURVE('',#201282,#201290,#201292,.T.); +#201290 = VERTEX_POINT('',#201291); +#201291 = CARTESIAN_POINT('',(146.02679,-78.884487,1.585)); +#201292 = LINE('',#201293,#201294); +#201293 = CARTESIAN_POINT('',(146.049721,-78.873654,1.585)); +#201294 = VECTOR('',#201295,1.); +#201295 = DIRECTION('',(-0.904180546134,-0.427150488695,0.)); +#201296 = ORIENTED_EDGE('',*,*,#201297,.T.); +#201297 = EDGE_CURVE('',#201290,#201298,#201300,.T.); +#201298 = VERTEX_POINT('',#201299); +#201299 = CARTESIAN_POINT('',(145.343293,-78.88148,1.585)); +#201300 = CIRCLE('',#201301,1.051817159858); +#201301 = AXIS2_PLACEMENT_3D('',#201302,#201303,#201304); +#201302 = CARTESIAN_POINT('',(145.68941778912,-77.88824439445,1.585)); +#201303 = DIRECTION('',(-0.,0.,-1.)); +#201304 = DIRECTION('',(0.320751765371,-0.947163293742,-0.)); +#201305 = ORIENTED_EDGE('',*,*,#201306,.T.); +#201306 = EDGE_CURVE('',#201298,#201307,#201309,.T.); +#201307 = VERTEX_POINT('',#201308); +#201308 = CARTESIAN_POINT('',(145.322206,-78.86739,1.585)); +#201309 = LINE('',#201310,#201311); +#201310 = CARTESIAN_POINT('',(145.343293,-78.88148,1.585)); +#201311 = VECTOR('',#201312,1.); +#201312 = DIRECTION('',(-0.831467480074,0.555573424112,0.)); +#201313 = ORIENTED_EDGE('',*,*,#201314,.T.); +#201314 = EDGE_CURVE('',#201307,#201315,#201317,.T.); +#201315 = VERTEX_POINT('',#201316); +#201316 = CARTESIAN_POINT('',(145.224316,-78.764783,1.585)); +#201317 = LINE('',#201318,#201319); +#201318 = CARTESIAN_POINT('',(145.322206,-78.86739,1.585)); +#201319 = VECTOR('',#201320,1.); +#201320 = DIRECTION('',(-0.690279999804,0.723542342832,0.)); +#201321 = ORIENTED_EDGE('',*,*,#201322,.T.); +#201322 = EDGE_CURVE('',#201315,#201323,#201325,.T.); +#201323 = VERTEX_POINT('',#201324); +#201324 = CARTESIAN_POINT('',(145.230702,-78.355558,1.585)); +#201325 = CIRCLE('',#201326,0.358408568206); +#201326 = AXIS2_PLACEMENT_3D('',#201327,#201328,#201329); +#201327 = CARTESIAN_POINT('',(145.52171836852,-78.56476166873,1.585)); +#201328 = DIRECTION('',(0.,0.,-1.)); +#201329 = DIRECTION('',(-0.829785878205,-0.558081890345,-0.)); +#201330 = ORIENTED_EDGE('',*,*,#201331,.T.); +#201331 = EDGE_CURVE('',#201323,#201238,#201332,.T.); +#201332 = LINE('',#201333,#201334); +#201333 = CARTESIAN_POINT('',(145.230702,-78.355558,1.585)); +#201334 = VECTOR('',#201335,1.); +#201335 = DIRECTION('',(0.700437882817,0.713713368457,0.)); +#201336 = FACE_BOUND('',#201337,.F.); +#201337 = EDGE_LOOP('',(#201338,#201349,#201357,#201366,#201374,#201383, + #201391,#201400)); +#201338 = ORIENTED_EDGE('',*,*,#201339,.T.); +#201339 = EDGE_CURVE('',#201340,#201342,#201344,.T.); +#201340 = VERTEX_POINT('',#201341); +#201341 = CARTESIAN_POINT('',(145.977793,-78.365834,1.585)); +#201342 = VERTEX_POINT('',#201343); +#201343 = CARTESIAN_POINT('',(145.401399,-78.365834,1.585)); +#201344 = CIRCLE('',#201345,0.890081885265); +#201345 = AXIS2_PLACEMENT_3D('',#201346,#201347,#201348); +#201346 = CARTESIAN_POINT('',(145.689596,-79.20796715554,1.585)); +#201347 = DIRECTION('',(0.,0.,1.)); +#201348 = DIRECTION('',(0.323787063607,0.946129979147,-0.)); +#201349 = ORIENTED_EDGE('',*,*,#201350,.T.); +#201350 = EDGE_CURVE('',#201342,#201351,#201353,.T.); +#201351 = VERTEX_POINT('',#201352); +#201352 = CARTESIAN_POINT('',(145.335875,-78.431358,1.585)); +#201353 = LINE('',#201354,#201355); +#201354 = CARTESIAN_POINT('',(145.401399,-78.365834,1.585)); +#201355 = VECTOR('',#201356,1.); +#201356 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#201357 = ORIENTED_EDGE('',*,*,#201358,.T.); +#201358 = EDGE_CURVE('',#201351,#201359,#201361,.T.); +#201359 = VERTEX_POINT('',#201360); +#201360 = CARTESIAN_POINT('',(145.335875,-78.697211,1.585)); +#201361 = CIRCLE('',#201362,0.229969180036); +#201362 = AXIS2_PLACEMENT_3D('',#201363,#201364,#201365); +#201363 = CARTESIAN_POINT('',(145.52353524982,-78.5642845,1.585)); +#201364 = DIRECTION('',(0.,0.,1.)); +#201365 = DIRECTION('',(-0.816023476689,0.578018758771,0.)); +#201366 = ORIENTED_EDGE('',*,*,#201367,.T.); +#201367 = EDGE_CURVE('',#201359,#201368,#201370,.T.); +#201368 = VERTEX_POINT('',#201369); +#201369 = CARTESIAN_POINT('',(145.401399,-78.762735,1.585)); +#201370 = LINE('',#201371,#201372); +#201371 = CARTESIAN_POINT('',(145.335875,-78.697211,1.585)); +#201372 = VECTOR('',#201373,1.); +#201373 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#201374 = ORIENTED_EDGE('',*,*,#201375,.T.); +#201375 = EDGE_CURVE('',#201368,#201376,#201378,.T.); +#201376 = VERTEX_POINT('',#201377); +#201377 = CARTESIAN_POINT('',(145.977793,-78.762735,1.585)); +#201378 = CIRCLE('',#201379,0.8900591398); +#201379 = AXIS2_PLACEMENT_3D('',#201380,#201381,#201382); +#201380 = CARTESIAN_POINT('',(145.689596,-77.92062588502,1.585)); +#201381 = DIRECTION('',(0.,0.,1.)); +#201382 = DIRECTION('',(-0.323795337987,-0.946127147427,0.)); +#201383 = ORIENTED_EDGE('',*,*,#201384,.T.); +#201384 = EDGE_CURVE('',#201376,#201385,#201387,.T.); +#201385 = VERTEX_POINT('',#201386); +#201386 = CARTESIAN_POINT('',(146.043318,-78.697212,1.585)); +#201387 = LINE('',#201388,#201389); +#201388 = CARTESIAN_POINT('',(145.977793,-78.762735,1.585)); +#201389 = VECTOR('',#201390,1.); +#201390 = DIRECTION('',(0.707117572673,0.707095989535,0.)); +#201391 = ORIENTED_EDGE('',*,*,#201392,.T.); +#201392 = EDGE_CURVE('',#201385,#201393,#201395,.T.); +#201393 = VERTEX_POINT('',#201394); +#201394 = CARTESIAN_POINT('',(146.043318,-78.431357,1.585)); +#201395 = CIRCLE('',#201396,0.229967514146); +#201396 = AXIS2_PLACEMENT_3D('',#201397,#201398,#201399); +#201397 = CARTESIAN_POINT('',(145.8556605,-78.5642845,1.585)); +#201398 = DIRECTION('',(0.,-0.,1.)); +#201399 = DIRECTION('',(0.816017430535,-0.578027294393,-0.)); +#201400 = ORIENTED_EDGE('',*,*,#201401,.T.); +#201401 = EDGE_CURVE('',#201393,#201340,#201402,.T.); +#201402 = LINE('',#201403,#201404); +#201403 = CARTESIAN_POINT('',(146.043318,-78.431357,1.585)); +#201404 = VECTOR('',#201405,1.); +#201405 = DIRECTION('',(-0.707117572673,0.707095989535,0.)); +#201406 = PLANE('',#201407); +#201407 = AXIS2_PLACEMENT_3D('',#201408,#201409,#201410); +#201408 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201409 = DIRECTION('',(0.,0.,1.)); +#201410 = DIRECTION('',(1.,0.,-0.)); +#201411 = SHELL_BASED_SURFACE_MODEL('',(#201412)); +#201412 = OPEN_SHELL('',(#201413)); +#201413 = ADVANCED_FACE('',(#201414),#201584,.T.); +#201414 = FACE_BOUND('',#201415,.F.); +#201415 = EDGE_LOOP('',(#201416,#201427,#201435,#201444,#201452,#201461, + #201469,#201477,#201485,#201494,#201502,#201511,#201519,#201528, + #201536,#201545,#201553,#201561,#201569,#201578)); +#201416 = ORIENTED_EDGE('',*,*,#201417,.T.); +#201417 = EDGE_CURVE('',#201418,#201420,#201422,.T.); +#201418 = VERTEX_POINT('',#201419); +#201419 = CARTESIAN_POINT('',(134.649349,-78.218323,1.585)); +#201420 = VERTEX_POINT('',#201421); +#201421 = CARTESIAN_POINT('',(134.741273,-78.310247,1.585)); +#201422 = CIRCLE('',#201423,6.50000837538E-02); +#201423 = AXIS2_PLACEMENT_3D('',#201424,#201425,#201426); +#201424 = CARTESIAN_POINT('',(134.69531098493,-78.26428501506,1.585)); +#201425 = DIRECTION('',(0.,0.,-1.)); +#201426 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#201427 = ORIENTED_EDGE('',*,*,#201428,.T.); +#201428 = EDGE_CURVE('',#201420,#201429,#201431,.T.); +#201429 = VERTEX_POINT('',#201430); +#201430 = CARTESIAN_POINT('',(134.709266,-78.342253,1.585)); +#201431 = LINE('',#201432,#201433); +#201432 = CARTESIAN_POINT('',(134.741273,-78.310247,1.585)); +#201433 = VECTOR('',#201434,1.); +#201434 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#201435 = ORIENTED_EDGE('',*,*,#201436,.T.); +#201436 = EDGE_CURVE('',#201429,#201437,#201439,.T.); +#201437 = VERTEX_POINT('',#201438); +#201438 = CARTESIAN_POINT('',(134.709265,-78.614886,1.585)); +#201439 = CIRCLE('',#201440,0.272201331757); +#201440 = AXIS2_PLACEMENT_3D('',#201441,#201442,#201443); +#201441 = CARTESIAN_POINT('',(134.94487402454,-78.47857036419,1.585)); +#201442 = DIRECTION('',(0.,0.,1.)); +#201443 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#201444 = ORIENTED_EDGE('',*,*,#201445,.T.); +#201445 = EDGE_CURVE('',#201437,#201446,#201448,.T.); +#201446 = VERTEX_POINT('',#201447); +#201447 = CARTESIAN_POINT('',(134.776669,-78.682292,1.585)); +#201448 = LINE('',#201449,#201450); +#201449 = CARTESIAN_POINT('',(134.709265,-78.614886,1.585)); +#201450 = VECTOR('',#201451,1.); +#201451 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#201452 = ORIENTED_EDGE('',*,*,#201453,.T.); +#201453 = EDGE_CURVE('',#201446,#201454,#201456,.T.); +#201454 = VERTEX_POINT('',#201455); +#201455 = CARTESIAN_POINT('',(135.115881,-78.756428,1.585)); +#201456 = CIRCLE('',#201457,0.553317785495); +#201457 = AXIS2_PLACEMENT_3D('',#201458,#201459,#201460); +#201458 = CARTESIAN_POINT('',(135.0584500839,-78.20609876979,1.585)); +#201459 = DIRECTION('',(0.,0.,1.)); +#201460 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#201461 = ORIENTED_EDGE('',*,*,#201462,.T.); +#201462 = EDGE_CURVE('',#201454,#201463,#201465,.T.); +#201463 = VERTEX_POINT('',#201464); +#201464 = CARTESIAN_POINT('',(135.272622,-78.717242,1.585)); +#201465 = LINE('',#201466,#201467); +#201466 = CARTESIAN_POINT('',(135.115881,-78.756428,1.585)); +#201467 = VECTOR('',#201468,1.); +#201468 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#201469 = ORIENTED_EDGE('',*,*,#201470,.T.); +#201470 = EDGE_CURVE('',#201463,#201471,#201473,.T.); +#201471 = VERTEX_POINT('',#201472); +#201472 = CARTESIAN_POINT('',(135.342522,-78.682293,1.585)); +#201473 = LINE('',#201474,#201475); +#201474 = CARTESIAN_POINT('',(135.272622,-78.717242,1.585)); +#201475 = VECTOR('',#201476,1.); +#201476 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#201477 = ORIENTED_EDGE('',*,*,#201478,.T.); +#201478 = EDGE_CURVE('',#201471,#201479,#201481,.T.); +#201479 = VERTEX_POINT('',#201480); +#201480 = CARTESIAN_POINT('',(135.409928,-78.614886,1.585)); +#201481 = LINE('',#201482,#201483); +#201482 = CARTESIAN_POINT('',(135.342522,-78.682293,1.585)); +#201483 = VECTOR('',#201484,1.); +#201484 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#201485 = ORIENTED_EDGE('',*,*,#201486,.T.); +#201486 = EDGE_CURVE('',#201479,#201487,#201489,.T.); +#201487 = VERTEX_POINT('',#201488); +#201488 = CARTESIAN_POINT('',(135.409928,-78.342254,1.585)); +#201489 = CIRCLE('',#201490,0.272194686174); +#201490 = AXIS2_PLACEMENT_3D('',#201491,#201492,#201493); +#201491 = CARTESIAN_POINT('',(135.17432686391,-78.47857,1.585)); +#201492 = DIRECTION('',(0.,-0.,1.)); +#201493 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#201494 = ORIENTED_EDGE('',*,*,#201495,.T.); +#201495 = EDGE_CURVE('',#201487,#201496,#201498,.T.); +#201496 = VERTEX_POINT('',#201497); +#201497 = CARTESIAN_POINT('',(135.377921,-78.310247,1.585)); +#201498 = LINE('',#201499,#201500); +#201499 = CARTESIAN_POINT('',(135.409928,-78.342254,1.585)); +#201500 = VECTOR('',#201501,1.); +#201501 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#201502 = ORIENTED_EDGE('',*,*,#201503,.T.); +#201503 = EDGE_CURVE('',#201496,#201504,#201506,.T.); +#201504 = VERTEX_POINT('',#201505); +#201505 = CARTESIAN_POINT('',(135.469843,-78.218323,1.585)); +#201506 = CIRCLE('',#201507,6.49993766517E-02); +#201507 = AXIS2_PLACEMENT_3D('',#201508,#201509,#201510); +#201508 = CARTESIAN_POINT('',(135.42388176676,-78.26428476677,1.585)); +#201509 = DIRECTION('',(0.,0.,-1.)); +#201510 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#201511 = ORIENTED_EDGE('',*,*,#201512,.T.); +#201512 = EDGE_CURVE('',#201504,#201513,#201515,.T.); +#201513 = VERTEX_POINT('',#201514); +#201514 = CARTESIAN_POINT('',(135.521003,-78.273604,1.585)); +#201515 = LINE('',#201516,#201517); +#201516 = CARTESIAN_POINT('',(135.469843,-78.218323,1.585)); +#201517 = VECTOR('',#201518,1.); +#201518 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#201519 = ORIENTED_EDGE('',*,*,#201520,.T.); +#201520 = EDGE_CURVE('',#201513,#201521,#201523,.T.); +#201521 = VERTEX_POINT('',#201522); +#201522 = CARTESIAN_POINT('',(135.520999,-78.683542,1.585)); +#201523 = CIRCLE('',#201524,0.409312568567); +#201524 = AXIS2_PLACEMENT_3D('',#201525,#201526,#201527); +#201525 = CARTESIAN_POINT('',(135.16670664807,-78.47856954294,1.585)); +#201526 = DIRECTION('',(0.,0.,-1.)); +#201527 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#201528 = ORIENTED_EDGE('',*,*,#201529,.T.); +#201529 = EDGE_CURVE('',#201521,#201530,#201532,.T.); +#201530 = VERTEX_POINT('',#201531); +#201531 = CARTESIAN_POINT('',(135.418322,-78.787465,1.585)); +#201532 = LINE('',#201533,#201534); +#201533 = CARTESIAN_POINT('',(135.520999,-78.683542,1.585)); +#201534 = VECTOR('',#201535,1.); +#201535 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#201536 = ORIENTED_EDGE('',*,*,#201537,.T.); +#201537 = EDGE_CURVE('',#201530,#201538,#201540,.T.); +#201538 = VERTEX_POINT('',#201539); +#201539 = CARTESIAN_POINT('',(134.979546,-78.884487,1.585)); +#201540 = CIRCLE('',#201541,0.675422176573); +#201541 = AXIS2_PLACEMENT_3D('',#201542,#201543,#201544); +#201542 = CARTESIAN_POINT('',(135.06141275007,-78.21404464465,1.585)); +#201543 = DIRECTION('',(0.,0.,-1.)); +#201544 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#201545 = ORIENTED_EDGE('',*,*,#201546,.T.); +#201546 = EDGE_CURVE('',#201538,#201547,#201549,.T.); +#201547 = VERTEX_POINT('',#201548); +#201548 = CARTESIAN_POINT('',(134.794813,-78.836709,1.585)); +#201549 = LINE('',#201550,#201551); +#201550 = CARTESIAN_POINT('',(134.979546,-78.884487,1.585)); +#201551 = VECTOR('',#201552,1.); +#201552 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#201553 = ORIENTED_EDGE('',*,*,#201554,.T.); +#201554 = EDGE_CURVE('',#201547,#201555,#201557,.T.); +#201555 = VERTEX_POINT('',#201556); +#201556 = CARTESIAN_POINT('',(134.692206,-78.781676,1.585)); +#201557 = LINE('',#201558,#201559); +#201558 = CARTESIAN_POINT('',(134.794813,-78.836709,1.585)); +#201559 = VECTOR('',#201560,1.); +#201560 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#201561 = ORIENTED_EDGE('',*,*,#201562,.T.); +#201562 = EDGE_CURVE('',#201555,#201563,#201565,.T.); +#201563 = VERTEX_POINT('',#201564); +#201564 = CARTESIAN_POINT('',(134.598191,-78.683538,1.585)); +#201565 = LINE('',#201566,#201567); +#201566 = CARTESIAN_POINT('',(134.692206,-78.781676,1.585)); +#201567 = VECTOR('',#201568,1.); +#201568 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#201569 = ORIENTED_EDGE('',*,*,#201570,.T.); +#201570 = EDGE_CURVE('',#201563,#201571,#201573,.T.); +#201571 = VERTEX_POINT('',#201572); +#201572 = CARTESIAN_POINT('',(134.598194,-78.273598,1.585)); +#201573 = CIRCLE('',#201574,0.40931290975); +#201574 = AXIS2_PLACEMENT_3D('',#201575,#201576,#201577); +#201575 = CARTESIAN_POINT('',(134.95248666757,-78.47857059277,1.585)); +#201576 = DIRECTION('',(0.,0.,-1.)); +#201577 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#201578 = ORIENTED_EDGE('',*,*,#201579,.T.); +#201579 = EDGE_CURVE('',#201571,#201418,#201580,.T.); +#201580 = LINE('',#201581,#201582); +#201581 = CARTESIAN_POINT('',(134.598194,-78.273598,1.585)); +#201582 = VECTOR('',#201583,1.); +#201583 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#201584 = PLANE('',#201585); +#201585 = AXIS2_PLACEMENT_3D('',#201586,#201587,#201588); +#201586 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201587 = DIRECTION('',(0.,0.,1.)); +#201588 = DIRECTION('',(1.,0.,-0.)); +#201589 = SHELL_BASED_SURFACE_MODEL('',(#201590)); +#201590 = OPEN_SHELL('',(#201591)); +#201591 = ADVANCED_FACE('',(#201592,#201693),#201768,.T.); +#201592 = FACE_BOUND('',#201593,.F.); +#201593 = EDGE_LOOP('',(#201594,#201605,#201613,#201621,#201629,#201637, + #201645,#201654,#201662,#201671,#201679,#201687)); +#201594 = ORIENTED_EDGE('',*,*,#201595,.T.); +#201595 = EDGE_CURVE('',#201596,#201598,#201600,.T.); +#201596 = VERTEX_POINT('',#201597); +#201597 = CARTESIAN_POINT('',(113.33087,-77.983961,1.585)); +#201598 = VERTEX_POINT('',#201599); +#201599 = CARTESIAN_POINT('',(113.761693,-77.886552,1.585)); +#201600 = CIRCLE('',#201601,0.670538401945); +#201601 = AXIS2_PLACEMENT_3D('',#201602,#201603,#201604); +#201602 = CARTESIAN_POINT('',(113.68590657351,-78.55279382249,1.585)); +#201603 = DIRECTION('',(0.,0.,-1.)); +#201604 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#201605 = ORIENTED_EDGE('',*,*,#201606,.T.); +#201606 = EDGE_CURVE('',#201598,#201607,#201609,.T.); +#201607 = VERTEX_POINT('',#201608); +#201608 = CARTESIAN_POINT('',(113.95438,-77.934718,1.585)); +#201609 = LINE('',#201610,#201611); +#201610 = CARTESIAN_POINT('',(113.761693,-77.886552,1.585)); +#201611 = VECTOR('',#201612,1.); +#201612 = DIRECTION('',(0.970149311613,-0.242508377541,0.)); +#201613 = ORIENTED_EDGE('',*,*,#201614,.T.); +#201614 = EDGE_CURVE('',#201607,#201615,#201617,.T.); +#201615 = VERTEX_POINT('',#201616); +#201616 = CARTESIAN_POINT('',(114.056987,-77.989751,1.585)); +#201617 = LINE('',#201618,#201619); +#201618 = CARTESIAN_POINT('',(113.95438,-77.934718,1.585)); +#201619 = VECTOR('',#201620,1.); +#201620 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#201621 = ORIENTED_EDGE('',*,*,#201622,.T.); +#201622 = EDGE_CURVE('',#201615,#201623,#201625,.T.); +#201623 = VERTEX_POINT('',#201624); +#201624 = CARTESIAN_POINT('',(114.150999,-78.087884,1.585)); +#201625 = LINE('',#201626,#201627); +#201626 = CARTESIAN_POINT('',(114.056987,-77.989751,1.585)); +#201627 = VECTOR('',#201628,1.); +#201628 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#201629 = ORIENTED_EDGE('',*,*,#201630,.T.); +#201630 = EDGE_CURVE('',#201623,#201631,#201633,.T.); +#201631 = VERTEX_POINT('',#201632); +#201632 = CARTESIAN_POINT('',(114.202563,-78.239776,1.585)); +#201633 = LINE('',#201634,#201635); +#201634 = CARTESIAN_POINT('',(114.150999,-78.087884,1.585)); +#201635 = VECTOR('',#201636,1.); +#201636 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#201637 = ORIENTED_EDGE('',*,*,#201638,.T.); +#201638 = EDGE_CURVE('',#201631,#201639,#201641,.T.); +#201639 = VERTEX_POINT('',#201640); +#201640 = CARTESIAN_POINT('',(114.204597,-78.464285,1.585)); +#201641 = LINE('',#201642,#201643); +#201642 = CARTESIAN_POINT('',(114.202563,-78.239776,1.585)); +#201643 = VECTOR('',#201644,1.); +#201644 = DIRECTION('',(9.05939864485E-03,-0.999958962806,0.)); +#201645 = ORIENTED_EDGE('',*,*,#201646,.T.); +#201646 = EDGE_CURVE('',#201639,#201647,#201649,.T.); +#201647 = VERTEX_POINT('',#201648); +#201648 = CARTESIAN_POINT('',(114.139597,-78.529285,1.585)); +#201649 = CIRCLE('',#201650,6.500103935393E-02); +#201650 = AXIS2_PLACEMENT_3D('',#201651,#201652,#201653); +#201651 = CARTESIAN_POINT('',(114.13959596065,-78.46428396065,1.585)); +#201652 = DIRECTION('',(0.,0.,-1.)); +#201653 = DIRECTION('',(0.999999999872,-1.598967714806E-05,0.)); +#201654 = ORIENTED_EDGE('',*,*,#201655,.T.); +#201655 = EDGE_CURVE('',#201647,#201656,#201658,.T.); +#201656 = VERTEX_POINT('',#201657); +#201657 = CARTESIAN_POINT('',(113.239597,-78.529285,1.585)); +#201658 = LINE('',#201659,#201660); +#201659 = CARTESIAN_POINT('',(114.139597,-78.529285,1.585)); +#201660 = VECTOR('',#201661,1.); +#201661 = DIRECTION('',(-1.,0.,0.)); +#201662 = ORIENTED_EDGE('',*,*,#201663,.T.); +#201663 = EDGE_CURVE('',#201656,#201664,#201666,.T.); +#201664 = VERTEX_POINT('',#201665); +#201665 = CARTESIAN_POINT('',(113.174597,-78.464285,1.585)); +#201666 = CIRCLE('',#201667,6.500103935388E-02); +#201667 = AXIS2_PLACEMENT_3D('',#201668,#201669,#201670); +#201668 = CARTESIAN_POINT('',(113.23959803934,-78.46428396065,1.585)); +#201669 = DIRECTION('',(0.,0.,-1.)); +#201670 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#201671 = ORIENTED_EDGE('',*,*,#201672,.T.); +#201672 = EDGE_CURVE('',#201664,#201673,#201675,.T.); +#201673 = VERTEX_POINT('',#201674); +#201674 = CARTESIAN_POINT('',(113.17663,-78.239776,1.585)); +#201675 = LINE('',#201676,#201677); +#201676 = CARTESIAN_POINT('',(113.174597,-78.464285,1.585)); +#201677 = VECTOR('',#201678,1.); +#201678 = DIRECTION('',(9.054945028444E-03,0.999959003145,0.)); +#201679 = ORIENTED_EDGE('',*,*,#201680,.T.); +#201680 = EDGE_CURVE('',#201673,#201681,#201683,.T.); +#201681 = VERTEX_POINT('',#201682); +#201682 = CARTESIAN_POINT('',(113.228191,-78.087888,1.585)); +#201683 = LINE('',#201684,#201685); +#201684 = CARTESIAN_POINT('',(113.17663,-78.239776,1.585)); +#201685 = VECTOR('',#201686,1.); +#201686 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#201687 = ORIENTED_EDGE('',*,*,#201688,.T.); +#201688 = EDGE_CURVE('',#201681,#201596,#201689,.T.); +#201689 = LINE('',#201690,#201691); +#201690 = CARTESIAN_POINT('',(113.228191,-78.087888,1.585)); +#201691 = VECTOR('',#201692,1.); +#201692 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#201693 = FACE_BOUND('',#201694,.F.); +#201694 = EDGE_LOOP('',(#201695,#201706,#201714,#201722,#201730,#201738, + #201746,#201754,#201762)); +#201695 = ORIENTED_EDGE('',*,*,#201696,.T.); +#201696 = EDGE_CURVE('',#201697,#201699,#201701,.T.); +#201697 = VERTEX_POINT('',#201698); +#201698 = CARTESIAN_POINT('',(113.902622,-78.054184,1.585)); +#201699 = VERTEX_POINT('',#201700); +#201700 = CARTESIAN_POINT('',(113.406669,-78.089134,1.585)); +#201701 = CIRCLE('',#201702,0.559258743581); +#201702 = AXIS2_PLACEMENT_3D('',#201703,#201704,#201705); +#201703 = CARTESIAN_POINT('',(113.68986183298,-78.57139136035,1.585)); +#201704 = DIRECTION('',(0.,0.,1.)); +#201705 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#201706 = ORIENTED_EDGE('',*,*,#201707,.T.); +#201707 = EDGE_CURVE('',#201699,#201708,#201710,.T.); +#201708 = VERTEX_POINT('',#201709); +#201709 = CARTESIAN_POINT('',(113.339265,-78.15654,1.585)); +#201710 = LINE('',#201711,#201712); +#201711 = CARTESIAN_POINT('',(113.406669,-78.089134,1.585)); +#201712 = VECTOR('',#201713,1.); +#201713 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#201714 = ORIENTED_EDGE('',*,*,#201715,.T.); +#201715 = EDGE_CURVE('',#201708,#201716,#201718,.T.); +#201716 = VERTEX_POINT('',#201717); +#201717 = CARTESIAN_POINT('',(113.304597,-78.260546,1.585)); +#201718 = LINE('',#201719,#201720); +#201719 = CARTESIAN_POINT('',(113.339265,-78.15654,1.585)); +#201720 = VECTOR('',#201721,1.); +#201721 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#201722 = ORIENTED_EDGE('',*,*,#201723,.T.); +#201723 = EDGE_CURVE('',#201716,#201724,#201726,.T.); +#201724 = VERTEX_POINT('',#201725); +#201725 = CARTESIAN_POINT('',(113.304597,-78.399285,1.585)); +#201726 = LINE('',#201727,#201728); +#201727 = CARTESIAN_POINT('',(113.304597,-78.260546,1.585)); +#201728 = VECTOR('',#201729,1.); +#201729 = DIRECTION('',(0.,-1.,0.)); +#201730 = ORIENTED_EDGE('',*,*,#201731,.T.); +#201731 = EDGE_CURVE('',#201724,#201732,#201734,.T.); +#201732 = VERTEX_POINT('',#201733); +#201733 = CARTESIAN_POINT('',(114.074597,-78.399285,1.585)); +#201734 = LINE('',#201735,#201736); +#201735 = CARTESIAN_POINT('',(113.304597,-78.399285,1.585)); +#201736 = VECTOR('',#201737,1.); +#201737 = DIRECTION('',(1.,0.,0.)); +#201738 = ORIENTED_EDGE('',*,*,#201739,.T.); +#201739 = EDGE_CURVE('',#201732,#201740,#201742,.T.); +#201740 = VERTEX_POINT('',#201741); +#201741 = CARTESIAN_POINT('',(114.074597,-78.260546,1.585)); +#201742 = LINE('',#201743,#201744); +#201743 = CARTESIAN_POINT('',(114.074597,-78.399285,1.585)); +#201744 = VECTOR('',#201745,1.); +#201745 = DIRECTION('',(0.,1.,0.)); +#201746 = ORIENTED_EDGE('',*,*,#201747,.T.); +#201747 = EDGE_CURVE('',#201740,#201748,#201750,.T.); +#201748 = VERTEX_POINT('',#201749); +#201749 = CARTESIAN_POINT('',(114.039928,-78.15654,1.585)); +#201750 = LINE('',#201751,#201752); +#201751 = CARTESIAN_POINT('',(114.074597,-78.260546,1.585)); +#201752 = VECTOR('',#201753,1.); +#201753 = DIRECTION('',(-0.316230502441,0.948682385905,0.)); +#201754 = ORIENTED_EDGE('',*,*,#201755,.T.); +#201755 = EDGE_CURVE('',#201748,#201756,#201758,.T.); +#201756 = VERTEX_POINT('',#201757); +#201757 = CARTESIAN_POINT('',(113.972522,-78.089134,1.585)); +#201758 = LINE('',#201759,#201760); +#201759 = CARTESIAN_POINT('',(114.039928,-78.15654,1.585)); +#201760 = VECTOR('',#201761,1.); +#201761 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#201762 = ORIENTED_EDGE('',*,*,#201763,.T.); +#201763 = EDGE_CURVE('',#201756,#201697,#201764,.T.); +#201764 = LINE('',#201765,#201766); +#201765 = CARTESIAN_POINT('',(113.972522,-78.089134,1.585)); +#201766 = VECTOR('',#201767,1.); +#201767 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#201768 = PLANE('',#201769); +#201769 = AXIS2_PLACEMENT_3D('',#201770,#201771,#201772); +#201770 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201771 = DIRECTION('',(0.,0.,1.)); +#201772 = DIRECTION('',(1.,0.,-0.)); +#201773 = SHELL_BASED_SURFACE_MODEL('',(#201774)); +#201774 = OPEN_SHELL('',(#201775)); +#201775 = ADVANCED_FACE('',(#201776),#201812,.T.); +#201776 = FACE_BOUND('',#201777,.F.); +#201777 = EDGE_LOOP('',(#201778,#201789,#201797,#201806)); +#201778 = ORIENTED_EDGE('',*,*,#201779,.T.); +#201779 = EDGE_CURVE('',#201780,#201782,#201784,.T.); +#201780 = VERTEX_POINT('',#201781); +#201781 = CARTESIAN_POINT('',(82.683526,-78.435214,1.585)); +#201782 = VERTEX_POINT('',#201783); +#201783 = CARTESIAN_POINT('',(82.683526,-78.140978,1.585)); +#201784 = CIRCLE('',#201785,0.150000292066); +#201785 = AXIS2_PLACEMENT_3D('',#201786,#201787,#201788); +#201786 = CARTESIAN_POINT('',(82.71279,-78.288096,1.585)); +#201787 = DIRECTION('',(0.,0.,-1.)); +#201788 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#201789 = ORIENTED_EDGE('',*,*,#201790,.T.); +#201790 = EDGE_CURVE('',#201782,#201791,#201793,.T.); +#201791 = VERTEX_POINT('',#201792); +#201792 = CARTESIAN_POINT('',(85.342054,-78.140978,1.585)); +#201793 = LINE('',#201794,#201795); +#201794 = CARTESIAN_POINT('',(82.683526,-78.140978,1.585)); +#201795 = VECTOR('',#201796,1.); +#201796 = DIRECTION('',(1.,0.,0.)); +#201797 = ORIENTED_EDGE('',*,*,#201798,.T.); +#201798 = EDGE_CURVE('',#201791,#201799,#201801,.T.); +#201799 = VERTEX_POINT('',#201800); +#201800 = CARTESIAN_POINT('',(85.342054,-78.435214,1.585)); +#201801 = CIRCLE('',#201802,0.150000292066); +#201802 = AXIS2_PLACEMENT_3D('',#201803,#201804,#201805); +#201803 = CARTESIAN_POINT('',(85.31279,-78.288096,1.585)); +#201804 = DIRECTION('',(0.,0.,-1.)); +#201805 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#201806 = ORIENTED_EDGE('',*,*,#201807,.T.); +#201807 = EDGE_CURVE('',#201799,#201780,#201808,.T.); +#201808 = LINE('',#201809,#201810); +#201809 = CARTESIAN_POINT('',(85.342054,-78.435214,1.585)); +#201810 = VECTOR('',#201811,1.); +#201811 = DIRECTION('',(-1.,0.,0.)); +#201812 = PLANE('',#201813); +#201813 = AXIS2_PLACEMENT_3D('',#201814,#201815,#201816); +#201814 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201815 = DIRECTION('',(0.,0.,1.)); +#201816 = DIRECTION('',(1.,0.,-0.)); +#201817 = SHELL_BASED_SURFACE_MODEL('',(#201818)); +#201818 = OPEN_SHELL('',(#201819)); +#201819 = ADVANCED_FACE('',(#201820),#201864,.T.); +#201820 = FACE_BOUND('',#201821,.F.); +#201821 = EDGE_LOOP('',(#201822,#201833,#201841,#201850,#201858)); +#201822 = ORIENTED_EDGE('',*,*,#201823,.T.); +#201823 = EDGE_CURVE('',#201824,#201826,#201828,.T.); +#201824 = VERTEX_POINT('',#201825); +#201825 = CARTESIAN_POINT('',(122.406688,-77.589412,1.585)); +#201826 = VERTEX_POINT('',#201827); +#201827 = CARTESIAN_POINT('',(122.53174,-77.614286,1.585)); +#201828 = CIRCLE('',#201829,6.499988811648E-02); +#201829 = AXIS2_PLACEMENT_3D('',#201830,#201831,#201832); +#201830 = CARTESIAN_POINT('',(122.46674011188,-77.6142862701,1.585)); +#201831 = DIRECTION('',(0.,0.,-1.)); +#201832 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#201833 = ORIENTED_EDGE('',*,*,#201834,.T.); +#201834 = EDGE_CURVE('',#201826,#201835,#201837,.T.); +#201835 = VERTEX_POINT('',#201836); +#201836 = CARTESIAN_POINT('',(122.53174,-78.3,1.585)); +#201837 = LINE('',#201838,#201839); +#201838 = CARTESIAN_POINT('',(122.53174,-77.614286,1.585)); +#201839 = VECTOR('',#201840,1.); +#201840 = DIRECTION('',(0.,-1.,0.)); +#201841 = ORIENTED_EDGE('',*,*,#201842,.T.); +#201842 = EDGE_CURVE('',#201835,#201843,#201845,.T.); +#201843 = VERTEX_POINT('',#201844); +#201844 = CARTESIAN_POINT('',(122.40174,-78.3,1.585)); +#201845 = CIRCLE('',#201846,6.500000000091E-02); +#201846 = AXIS2_PLACEMENT_3D('',#201847,#201848,#201849); +#201847 = CARTESIAN_POINT('',(122.46674,-78.29999965513,1.585)); +#201848 = DIRECTION('',(-0.,0.,-1.)); +#201849 = DIRECTION('',(0.999999999986,-5.305658025668E-06,-0.)); +#201850 = ORIENTED_EDGE('',*,*,#201851,.T.); +#201851 = EDGE_CURVE('',#201843,#201852,#201854,.T.); +#201852 = VERTEX_POINT('',#201853); +#201853 = CARTESIAN_POINT('',(122.40174,-77.614286,1.585)); +#201854 = LINE('',#201855,#201856); +#201855 = CARTESIAN_POINT('',(122.40174,-78.3,1.585)); +#201856 = VECTOR('',#201857,1.); +#201857 = DIRECTION('',(0.,1.,0.)); +#201858 = ORIENTED_EDGE('',*,*,#201859,.T.); +#201859 = EDGE_CURVE('',#201852,#201824,#201860,.T.); +#201860 = LINE('',#201861,#201862); +#201861 = CARTESIAN_POINT('',(122.40174,-77.614286,1.585)); +#201862 = VECTOR('',#201863,1.); +#201863 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#201864 = PLANE('',#201865); +#201865 = AXIS2_PLACEMENT_3D('',#201866,#201867,#201868); +#201866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201867 = DIRECTION('',(0.,0.,1.)); +#201868 = DIRECTION('',(1.,0.,-0.)); +#201869 = SHELL_BASED_SURFACE_MODEL('',(#201870)); +#201870 = OPEN_SHELL('',(#201871)); +#201871 = ADVANCED_FACE('',(#201872,#201974),#202076,.T.); +#201872 = FACE_BOUND('',#201873,.F.); +#201873 = EDGE_LOOP('',(#201874,#201884,#201893,#201901,#201909,#201918, + #201926,#201934,#201943,#201951,#201959,#201968)); +#201874 = ORIENTED_EDGE('',*,*,#201875,.T.); +#201875 = EDGE_CURVE('',#201876,#201878,#201880,.T.); +#201876 = VERTEX_POINT('',#201877); +#201877 = CARTESIAN_POINT('',(206.126866,-77.593315,1.585)); +#201878 = VERTEX_POINT('',#201879); +#201879 = CARTESIAN_POINT('',(206.243755,-77.536053,1.585)); +#201880 = LINE('',#201881,#201882); +#201881 = CARTESIAN_POINT('',(206.126866,-77.593315,1.585)); +#201882 = VECTOR('',#201883,1.); +#201883 = DIRECTION('',(0.898031613354,0.439930928007,0.)); +#201884 = ORIENTED_EDGE('',*,*,#201885,.T.); +#201885 = EDGE_CURVE('',#201878,#201886,#201888,.T.); +#201886 = VERTEX_POINT('',#201887); +#201887 = CARTESIAN_POINT('',(206.914533,-77.541732,1.585)); +#201888 = CIRCLE('',#201889,0.965975843555); +#201889 = AXIS2_PLACEMENT_3D('',#201890,#201891,#201892); +#201890 = CARTESIAN_POINT('',(206.57147484794,-78.44473833145,1.585)); +#201891 = DIRECTION('',(0.,0.,-1.)); +#201892 = DIRECTION('',(-0.339262984817,0.940691568546,0.)); +#201893 = ORIENTED_EDGE('',*,*,#201894,.T.); +#201894 = EDGE_CURVE('',#201886,#201895,#201897,.T.); +#201895 = VERTEX_POINT('',#201896); +#201896 = CARTESIAN_POINT('',(207.023513,-77.598681,1.585)); +#201897 = LINE('',#201898,#201899); +#201898 = CARTESIAN_POINT('',(206.914533,-77.541732,1.585)); +#201899 = VECTOR('',#201900,1.); +#201900 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#201901 = ORIENTED_EDGE('',*,*,#201902,.T.); +#201902 = EDGE_CURVE('',#201895,#201903,#201905,.T.); +#201903 = VERTEX_POINT('',#201904); +#201904 = CARTESIAN_POINT('',(207.086967,-77.664211,1.585)); +#201905 = LINE('',#201906,#201907); +#201906 = CARTESIAN_POINT('',(207.023513,-77.598681,1.585)); +#201907 = VECTOR('',#201908,1.); +#201908 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#201909 = ORIENTED_EDGE('',*,*,#201910,.T.); +#201910 = EDGE_CURVE('',#201903,#201911,#201913,.T.); +#201911 = VERTEX_POINT('',#201912); +#201912 = CARTESIAN_POINT('',(207.0816,-78.03705,1.585)); +#201913 = CIRCLE('',#201914,0.290999070188); +#201914 = AXIS2_PLACEMENT_3D('',#201915,#201916,#201917); +#201915 = CARTESIAN_POINT('',(206.86087650487,-77.84741456673,1.585)); +#201916 = DIRECTION('',(0.,0.,-1.)); +#201917 = DIRECTION('',(0.776945764738,0.629567533038,0.)); +#201918 = ORIENTED_EDGE('',*,*,#201919,.T.); +#201919 = EDGE_CURVE('',#201911,#201920,#201922,.T.); +#201920 = VERTEX_POINT('',#201921); +#201921 = CARTESIAN_POINT('',(207.016067,-78.100503,1.585)); +#201922 = LINE('',#201923,#201924); +#201923 = CARTESIAN_POINT('',(207.0816,-78.03705,1.585)); +#201924 = VECTOR('',#201925,1.); +#201925 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#201926 = ORIENTED_EDGE('',*,*,#201927,.T.); +#201927 = EDGE_CURVE('',#201920,#201928,#201930,.T.); +#201928 = VERTEX_POINT('',#201929); +#201929 = CARTESIAN_POINT('',(206.899182,-78.157765,1.585)); +#201930 = LINE('',#201931,#201932); +#201931 = CARTESIAN_POINT('',(207.016067,-78.100503,1.585)); +#201932 = VECTOR('',#201933,1.); +#201933 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#201934 = ORIENTED_EDGE('',*,*,#201935,.T.); +#201935 = EDGE_CURVE('',#201928,#201936,#201938,.T.); +#201936 = VERTEX_POINT('',#201937); +#201937 = CARTESIAN_POINT('',(206.228404,-78.152086,1.585)); +#201938 = CIRCLE('',#201939,0.967158496826); +#201939 = AXIS2_PLACEMENT_3D('',#201940,#201941,#201942); +#201940 = CARTESIAN_POINT('',(206.57147282772,-77.24781870686,1.585)); +#201941 = DIRECTION('',(-0.,0.,-1.)); +#201942 = DIRECTION('',(0.338837091703,-0.940845059128,-0.)); +#201943 = ORIENTED_EDGE('',*,*,#201944,.T.); +#201944 = EDGE_CURVE('',#201936,#201945,#201947,.T.); +#201945 = VERTEX_POINT('',#201946); +#201946 = CARTESIAN_POINT('',(206.119423,-78.095136,1.585)); +#201947 = LINE('',#201948,#201949); +#201948 = CARTESIAN_POINT('',(206.228404,-78.152086,1.585)); +#201949 = VECTOR('',#201950,1.); +#201950 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#201951 = ORIENTED_EDGE('',*,*,#201952,.T.); +#201952 = EDGE_CURVE('',#201945,#201953,#201955,.T.); +#201953 = VERTEX_POINT('',#201954); +#201954 = CARTESIAN_POINT('',(206.05597,-78.029606,1.585)); +#201955 = LINE('',#201956,#201957); +#201956 = CARTESIAN_POINT('',(206.119423,-78.095136,1.585)); +#201957 = VECTOR('',#201958,1.); +#201958 = DIRECTION('',(-0.695630129574,0.718400113327,0.)); +#201959 = ORIENTED_EDGE('',*,*,#201960,.T.); +#201960 = EDGE_CURVE('',#201953,#201961,#201963,.T.); +#201961 = VERTEX_POINT('',#201962); +#201962 = CARTESIAN_POINT('',(206.061336,-77.656768,1.585)); +#201963 = CIRCLE('',#201964,0.291002094877); +#201964 = AXIS2_PLACEMENT_3D('',#201965,#201966,#201967); +#201965 = CARTESIAN_POINT('',(206.28206436573,-77.84640240558,1.585)); +#201966 = DIRECTION('',(0.,0.,-1.)); +#201967 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#201968 = ORIENTED_EDGE('',*,*,#201969,.T.); +#201969 = EDGE_CURVE('',#201961,#201876,#201970,.T.); +#201970 = LINE('',#201971,#201972); +#201971 = CARTESIAN_POINT('',(206.061336,-77.656768,1.585)); +#201972 = VECTOR('',#201973,1.); +#201973 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#201974 = FACE_BOUND('',#201975,.F.); +#201975 = EDGE_LOOP('',(#201976,#201987,#201995,#202003,#202012,#202020, + #202028,#202037,#202045,#202053,#202062,#202070)); +#201976 = ORIENTED_EDGE('',*,*,#201977,.T.); +#201977 = EDGE_CURVE('',#201978,#201980,#201982,.T.); +#201978 = VERTEX_POINT('',#201979); +#201979 = CARTESIAN_POINT('',(206.854816,-77.679578,1.585)); +#201980 = VERTEX_POINT('',#201981); +#201981 = CARTESIAN_POINT('',(206.288121,-77.679578,1.585)); +#201982 = CIRCLE('',#201983,0.815450468383); +#201983 = AXIS2_PLACEMENT_3D('',#201984,#201985,#201986); +#201984 = CARTESIAN_POINT('',(206.5714685,-78.44421756255,1.585)); +#201985 = DIRECTION('',(0.,0.,1.)); +#201986 = DIRECTION('',(0.347473587895,0.937689770508,-0.)); +#201987 = ORIENTED_EDGE('',*,*,#201988,.T.); +#201988 = EDGE_CURVE('',#201980,#201989,#201991,.T.); +#201989 = VERTEX_POINT('',#201990); +#201990 = CARTESIAN_POINT('',(206.211134,-77.718072,1.585)); +#201991 = LINE('',#201992,#201993); +#201992 = CARTESIAN_POINT('',(206.288121,-77.679578,1.585)); +#201993 = VECTOR('',#201994,1.); +#201994 = DIRECTION('',(-0.894424867414,-0.447218242641,0.)); +#201995 = ORIENTED_EDGE('',*,*,#201996,.T.); +#201996 = EDGE_CURVE('',#201989,#201997,#201999,.T.); +#201997 = VERTEX_POINT('',#201998); +#201998 = CARTESIAN_POINT('',(206.180727,-77.748479,1.585)); +#201999 = LINE('',#202000,#202001); +#202000 = CARTESIAN_POINT('',(206.211134,-77.718072,1.585)); +#202001 = VECTOR('',#202002,1.); +#202002 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#202003 = ORIENTED_EDGE('',*,*,#202004,.T.); +#202004 = EDGE_CURVE('',#201997,#202005,#202007,.T.); +#202005 = VERTEX_POINT('',#202006); +#202006 = CARTESIAN_POINT('',(206.180727,-77.945339,1.585)); +#202007 = CIRCLE('',#202008,0.148516804184); +#202008 = AXIS2_PLACEMENT_3D('',#202009,#202010,#202011); +#202009 = CARTESIAN_POINT('',(206.291942,-77.846909,1.585)); +#202010 = DIRECTION('',(0.,0.,1.)); +#202011 = DIRECTION('',(-0.748837820819,0.662753286006,0.)); +#202012 = ORIENTED_EDGE('',*,*,#202013,.T.); +#202013 = EDGE_CURVE('',#202005,#202014,#202016,.T.); +#202014 = VERTEX_POINT('',#202015); +#202015 = CARTESIAN_POINT('',(206.211134,-77.975746,1.585)); +#202016 = LINE('',#202017,#202018); +#202017 = CARTESIAN_POINT('',(206.180727,-77.945339,1.585)); +#202018 = VECTOR('',#202019,1.); +#202019 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#202020 = ORIENTED_EDGE('',*,*,#202021,.T.); +#202021 = EDGE_CURVE('',#202014,#202022,#202024,.T.); +#202022 = VERTEX_POINT('',#202023); +#202023 = CARTESIAN_POINT('',(206.288121,-78.014239,1.585)); +#202024 = LINE('',#202025,#202026); +#202025 = CARTESIAN_POINT('',(206.211134,-77.975746,1.585)); +#202026 = VECTOR('',#202027,1.); +#202027 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#202028 = ORIENTED_EDGE('',*,*,#202029,.T.); +#202029 = EDGE_CURVE('',#202022,#202030,#202032,.T.); +#202030 = VERTEX_POINT('',#202031); +#202031 = CARTESIAN_POINT('',(206.854816,-78.014239,1.585)); +#202032 = CIRCLE('',#202033,0.815433004022); +#202033 = AXIS2_PLACEMENT_3D('',#202034,#202035,#202036); +#202034 = CARTESIAN_POINT('',(206.5714685,-77.24961806235,1.585)); +#202035 = DIRECTION('',(0.,0.,1.)); +#202036 = DIRECTION('',(-0.347481029836,-0.937687012763,0.)); +#202037 = ORIENTED_EDGE('',*,*,#202038,.T.); +#202038 = EDGE_CURVE('',#202030,#202039,#202041,.T.); +#202039 = VERTEX_POINT('',#202040); +#202040 = CARTESIAN_POINT('',(206.931803,-77.975745,1.585)); +#202041 = LINE('',#202042,#202043); +#202042 = CARTESIAN_POINT('',(206.854816,-78.014239,1.585)); +#202043 = VECTOR('',#202044,1.); +#202044 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#202045 = ORIENTED_EDGE('',*,*,#202046,.T.); +#202046 = EDGE_CURVE('',#202039,#202047,#202049,.T.); +#202047 = VERTEX_POINT('',#202048); +#202048 = CARTESIAN_POINT('',(206.962211,-77.945338,1.585)); +#202049 = LINE('',#202050,#202051); +#202050 = CARTESIAN_POINT('',(206.931803,-77.975745,1.585)); +#202051 = VECTOR('',#202052,1.); +#202052 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#202053 = ORIENTED_EDGE('',*,*,#202054,.T.); +#202054 = EDGE_CURVE('',#202047,#202055,#202057,.T.); +#202055 = VERTEX_POINT('',#202056); +#202056 = CARTESIAN_POINT('',(206.962211,-77.748479,1.585)); +#202057 = CIRCLE('',#202058,0.148515070089); +#202058 = AXIS2_PLACEMENT_3D('',#202059,#202060,#202061); +#202059 = CARTESIAN_POINT('',(206.85099787319,-77.8469085,1.585)); +#202060 = DIRECTION('',(0.,-0.,1.)); +#202061 = DIRECTION('',(0.748833951572,-0.6627576578,-0.)); +#202062 = ORIENTED_EDGE('',*,*,#202063,.T.); +#202063 = EDGE_CURVE('',#202055,#202064,#202066,.T.); +#202064 = VERTEX_POINT('',#202065); +#202065 = CARTESIAN_POINT('',(206.931803,-77.718072,1.585)); +#202066 = LINE('',#202067,#202068); +#202067 = CARTESIAN_POINT('',(206.962211,-77.748479,1.585)); +#202068 = VECTOR('',#202069,1.); +#202069 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#202070 = ORIENTED_EDGE('',*,*,#202071,.T.); +#202071 = EDGE_CURVE('',#202064,#201978,#202072,.T.); +#202072 = LINE('',#202073,#202074); +#202073 = CARTESIAN_POINT('',(206.931803,-77.718072,1.585)); +#202074 = VECTOR('',#202075,1.); +#202075 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#202076 = PLANE('',#202077); +#202077 = AXIS2_PLACEMENT_3D('',#202078,#202079,#202080); +#202078 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202079 = DIRECTION('',(0.,0.,1.)); +#202080 = DIRECTION('',(1.,0.,-0.)); +#202081 = SHELL_BASED_SURFACE_MODEL('',(#202082)); +#202082 = OPEN_SHELL('',(#202083)); +#202083 = ADVANCED_FACE('',(#202084),#202325,.T.); +#202084 = FACE_BOUND('',#202085,.F.); +#202085 = EDGE_LOOP('',(#202086,#202097,#202105,#202113,#202121,#202129, + #202138,#202146,#202155,#202163,#202171,#202179,#202187,#202195, + #202203,#202212,#202220,#202228,#202236,#202244,#202253,#202261, + #202269,#202277,#202286,#202294,#202302,#202310,#202319)); +#202086 = ORIENTED_EDGE('',*,*,#202087,.T.); +#202087 = EDGE_CURVE('',#202088,#202090,#202092,.T.); +#202088 = VERTEX_POINT('',#202089); +#202089 = CARTESIAN_POINT('',(152.868882,-77.542856,1.585)); +#202090 = VERTEX_POINT('',#202091); +#202091 = CARTESIAN_POINT('',(152.933882,-77.477856,1.585)); +#202092 = CIRCLE('',#202093,6.500103935386E-02); +#202093 = AXIS2_PLACEMENT_3D('',#202094,#202095,#202096); +#202094 = CARTESIAN_POINT('',(152.93388303934,-77.54285703934,1.585)); +#202095 = DIRECTION('',(0.,0.,-1.)); +#202096 = DIRECTION('',(-0.999999999872,1.59896756177E-05,0.)); +#202097 = ORIENTED_EDGE('',*,*,#202098,.T.); +#202098 = EDGE_CURVE('',#202090,#202099,#202101,.T.); +#202099 = VERTEX_POINT('',#202100); +#202100 = CARTESIAN_POINT('',(153.233882,-77.477856,1.585)); +#202101 = LINE('',#202102,#202103); +#202102 = CARTESIAN_POINT('',(152.933882,-77.477856,1.585)); +#202103 = VECTOR('',#202104,1.); +#202104 = DIRECTION('',(1.,0.,0.)); +#202105 = ORIENTED_EDGE('',*,*,#202106,.T.); +#202106 = EDGE_CURVE('',#202099,#202107,#202109,.T.); +#202107 = VERTEX_POINT('',#202108); +#202108 = CARTESIAN_POINT('',(153.258756,-77.482804,1.585)); +#202109 = LINE('',#202110,#202111); +#202110 = CARTESIAN_POINT('',(153.233882,-77.477856,1.585)); +#202111 = VECTOR('',#202112,1.); +#202112 = DIRECTION('',(0.98078336573,-0.19509994748,0.)); +#202113 = ORIENTED_EDGE('',*,*,#202114,.T.); +#202114 = EDGE_CURVE('',#202107,#202115,#202117,.T.); +#202115 = VERTEX_POINT('',#202116); +#202116 = CARTESIAN_POINT('',(153.279843,-77.496894,1.585)); +#202117 = LINE('',#202118,#202119); +#202118 = CARTESIAN_POINT('',(153.258756,-77.482804,1.585)); +#202119 = VECTOR('',#202120,1.); +#202120 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#202121 = ORIENTED_EDGE('',*,*,#202122,.T.); +#202122 = EDGE_CURVE('',#202115,#202123,#202125,.T.); +#202123 = VERTEX_POINT('',#202124); +#202124 = CARTESIAN_POINT('',(153.331003,-77.552175,1.585)); +#202125 = LINE('',#202126,#202127); +#202126 = CARTESIAN_POINT('',(153.279843,-77.496894,1.585)); +#202127 = VECTOR('',#202128,1.); +#202128 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#202129 = ORIENTED_EDGE('',*,*,#202130,.T.); +#202130 = EDGE_CURVE('',#202123,#202131,#202133,.T.); +#202131 = VERTEX_POINT('',#202132); +#202132 = CARTESIAN_POINT('',(153.330999,-77.962113,1.585)); +#202133 = CIRCLE('',#202134,0.409312568567); +#202134 = AXIS2_PLACEMENT_3D('',#202135,#202136,#202137); +#202135 = CARTESIAN_POINT('',(152.97670664807,-77.75714054294,1.585)); +#202136 = DIRECTION('',(0.,0.,-1.)); +#202137 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#202138 = ORIENTED_EDGE('',*,*,#202139,.T.); +#202139 = EDGE_CURVE('',#202131,#202140,#202142,.T.); +#202140 = VERTEX_POINT('',#202141); +#202141 = CARTESIAN_POINT('',(153.228322,-78.066036,1.585)); +#202142 = LINE('',#202143,#202144); +#202143 = CARTESIAN_POINT('',(153.330999,-77.962113,1.585)); +#202144 = VECTOR('',#202145,1.); +#202145 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#202146 = ORIENTED_EDGE('',*,*,#202147,.T.); +#202147 = EDGE_CURVE('',#202140,#202148,#202150,.T.); +#202148 = VERTEX_POINT('',#202149); +#202149 = CARTESIAN_POINT('',(152.789546,-78.163058,1.585)); +#202150 = CIRCLE('',#202151,0.675422176574); +#202151 = AXIS2_PLACEMENT_3D('',#202152,#202153,#202154); +#202152 = CARTESIAN_POINT('',(152.87141275007,-77.49261564465,1.585)); +#202153 = DIRECTION('',(0.,0.,-1.)); +#202154 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#202155 = ORIENTED_EDGE('',*,*,#202156,.T.); +#202156 = EDGE_CURVE('',#202148,#202157,#202159,.T.); +#202157 = VERTEX_POINT('',#202158); +#202158 = CARTESIAN_POINT('',(152.604813,-78.11528,1.585)); +#202159 = LINE('',#202160,#202161); +#202160 = CARTESIAN_POINT('',(152.789546,-78.163058,1.585)); +#202161 = VECTOR('',#202162,1.); +#202162 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#202163 = ORIENTED_EDGE('',*,*,#202164,.T.); +#202164 = EDGE_CURVE('',#202157,#202165,#202167,.T.); +#202165 = VERTEX_POINT('',#202166); +#202166 = CARTESIAN_POINT('',(152.502206,-78.060247,1.585)); +#202167 = LINE('',#202168,#202169); +#202168 = CARTESIAN_POINT('',(152.604813,-78.11528,1.585)); +#202169 = VECTOR('',#202170,1.); +#202170 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#202171 = ORIENTED_EDGE('',*,*,#202172,.T.); +#202172 = EDGE_CURVE('',#202165,#202173,#202175,.T.); +#202173 = VERTEX_POINT('',#202174); +#202174 = CARTESIAN_POINT('',(152.408191,-77.962109,1.585)); +#202175 = LINE('',#202176,#202177); +#202176 = CARTESIAN_POINT('',(152.502206,-78.060247,1.585)); +#202177 = VECTOR('',#202178,1.); +#202178 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#202179 = ORIENTED_EDGE('',*,*,#202180,.T.); +#202180 = EDGE_CURVE('',#202173,#202181,#202183,.T.); +#202181 = VERTEX_POINT('',#202182); +#202182 = CARTESIAN_POINT('',(152.35663,-77.810221,1.585)); +#202183 = LINE('',#202184,#202185); +#202184 = CARTESIAN_POINT('',(152.408191,-77.962109,1.585)); +#202185 = VECTOR('',#202186,1.); +#202186 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#202187 = ORIENTED_EDGE('',*,*,#202188,.T.); +#202188 = EDGE_CURVE('',#202181,#202189,#202191,.T.); +#202189 = VERTEX_POINT('',#202190); +#202190 = CARTESIAN_POINT('',(152.357512,-77.656771,1.585)); +#202191 = LINE('',#202192,#202193); +#202192 = CARTESIAN_POINT('',(152.35663,-77.810221,1.585)); +#202193 = VECTOR('',#202194,1.); +#202194 = DIRECTION('',(5.747705643331E-03,0.999983481803,0.)); +#202195 = ORIENTED_EDGE('',*,*,#202196,.T.); +#202196 = EDGE_CURVE('',#202189,#202197,#202199,.T.); +#202197 = VERTEX_POINT('',#202198); +#202198 = CARTESIAN_POINT('',(152.404316,-77.556644,1.585)); +#202199 = LINE('',#202200,#202201); +#202200 = CARTESIAN_POINT('',(152.357512,-77.656771,1.585)); +#202201 = VECTOR('',#202202,1.); +#202202 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#202203 = ORIENTED_EDGE('',*,*,#202204,.T.); +#202204 = EDGE_CURVE('',#202197,#202205,#202207,.T.); +#202205 = VERTEX_POINT('',#202206); +#202206 = CARTESIAN_POINT('',(152.520592,-77.614782,1.585)); +#202207 = CIRCLE('',#202208,6.500026004258E-02); +#202208 = AXIS2_PLACEMENT_3D('',#202209,#202210,#202211); +#202209 = CARTESIAN_POINT('',(152.46245365279,-77.5857136944,1.585)); +#202210 = DIRECTION('',(0.,0.,-1.)); +#202211 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#202212 = ORIENTED_EDGE('',*,*,#202213,.T.); +#202213 = EDGE_CURVE('',#202205,#202214,#202216,.T.); +#202214 = VERTEX_POINT('',#202215); +#202215 = CARTESIAN_POINT('',(152.484597,-77.686772,1.585)); +#202216 = LINE('',#202217,#202218); +#202217 = CARTESIAN_POINT('',(152.520592,-77.614782,1.585)); +#202218 = VECTOR('',#202219,1.); +#202219 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#202220 = ORIENTED_EDGE('',*,*,#202221,.T.); +#202221 = EDGE_CURVE('',#202214,#202222,#202224,.T.); +#202222 = VERTEX_POINT('',#202223); +#202223 = CARTESIAN_POINT('',(152.484597,-77.789452,1.585)); +#202224 = LINE('',#202225,#202226); +#202225 = CARTESIAN_POINT('',(152.484597,-77.686772,1.585)); +#202226 = VECTOR('',#202227,1.); +#202227 = DIRECTION('',(0.,-1.,0.)); +#202228 = ORIENTED_EDGE('',*,*,#202229,.T.); +#202229 = EDGE_CURVE('',#202222,#202230,#202232,.T.); +#202230 = VERTEX_POINT('',#202231); +#202231 = CARTESIAN_POINT('',(152.519265,-77.893457,1.585)); +#202232 = LINE('',#202233,#202234); +#202233 = CARTESIAN_POINT('',(152.484597,-77.789452,1.585)); +#202234 = VECTOR('',#202235,1.); +#202235 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#202236 = ORIENTED_EDGE('',*,*,#202237,.T.); +#202237 = EDGE_CURVE('',#202230,#202238,#202240,.T.); +#202238 = VERTEX_POINT('',#202239); +#202239 = CARTESIAN_POINT('',(152.586669,-77.960863,1.585)); +#202240 = LINE('',#202241,#202242); +#202241 = CARTESIAN_POINT('',(152.519265,-77.893457,1.585)); +#202242 = VECTOR('',#202243,1.); +#202243 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#202244 = ORIENTED_EDGE('',*,*,#202245,.T.); +#202245 = EDGE_CURVE('',#202238,#202246,#202248,.T.); +#202246 = VERTEX_POINT('',#202247); +#202247 = CARTESIAN_POINT('',(152.925881,-78.034999,1.585)); +#202248 = CIRCLE('',#202249,0.553317785495); +#202249 = AXIS2_PLACEMENT_3D('',#202250,#202251,#202252); +#202250 = CARTESIAN_POINT('',(152.8684500839,-77.48466976979,1.585)); +#202251 = DIRECTION('',(0.,0.,1.)); +#202252 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#202253 = ORIENTED_EDGE('',*,*,#202254,.T.); +#202254 = EDGE_CURVE('',#202246,#202255,#202257,.T.); +#202255 = VERTEX_POINT('',#202256); +#202256 = CARTESIAN_POINT('',(153.082622,-77.995813,1.585)); +#202257 = LINE('',#202258,#202259); +#202258 = CARTESIAN_POINT('',(152.925881,-78.034999,1.585)); +#202259 = VECTOR('',#202260,1.); +#202260 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#202261 = ORIENTED_EDGE('',*,*,#202262,.T.); +#202262 = EDGE_CURVE('',#202255,#202263,#202265,.T.); +#202263 = VERTEX_POINT('',#202264); +#202264 = CARTESIAN_POINT('',(153.152522,-77.960864,1.585)); +#202265 = LINE('',#202266,#202267); +#202266 = CARTESIAN_POINT('',(153.082622,-77.995813,1.585)); +#202267 = VECTOR('',#202268,1.); +#202268 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#202269 = ORIENTED_EDGE('',*,*,#202270,.T.); +#202270 = EDGE_CURVE('',#202263,#202271,#202273,.T.); +#202271 = VERTEX_POINT('',#202272); +#202272 = CARTESIAN_POINT('',(153.219928,-77.893457,1.585)); +#202273 = LINE('',#202274,#202275); +#202274 = CARTESIAN_POINT('',(153.152522,-77.960864,1.585)); +#202275 = VECTOR('',#202276,1.); +#202276 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#202277 = ORIENTED_EDGE('',*,*,#202278,.T.); +#202278 = EDGE_CURVE('',#202271,#202279,#202281,.T.); +#202279 = VERTEX_POINT('',#202280); +#202280 = CARTESIAN_POINT('',(153.219928,-77.620825,1.585)); +#202281 = CIRCLE('',#202282,0.272194686174); +#202282 = AXIS2_PLACEMENT_3D('',#202283,#202284,#202285); +#202283 = CARTESIAN_POINT('',(152.98432686391,-77.757141,1.585)); +#202284 = DIRECTION('',(0.,-0.,1.)); +#202285 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#202286 = ORIENTED_EDGE('',*,*,#202287,.T.); +#202287 = EDGE_CURVE('',#202279,#202288,#202290,.T.); +#202288 = VERTEX_POINT('',#202289); +#202289 = CARTESIAN_POINT('',(153.206959,-77.607856,1.585)); +#202290 = LINE('',#202291,#202292); +#202291 = CARTESIAN_POINT('',(153.219928,-77.620825,1.585)); +#202292 = VECTOR('',#202293,1.); +#202293 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202294 = ORIENTED_EDGE('',*,*,#202295,.T.); +#202295 = EDGE_CURVE('',#202288,#202296,#202298,.T.); +#202296 = VERTEX_POINT('',#202297); +#202297 = CARTESIAN_POINT('',(152.998882,-77.607856,1.585)); +#202298 = LINE('',#202299,#202300); +#202299 = CARTESIAN_POINT('',(153.206959,-77.607856,1.585)); +#202300 = VECTOR('',#202301,1.); +#202301 = DIRECTION('',(-1.,0.,0.)); +#202302 = ORIENTED_EDGE('',*,*,#202303,.T.); +#202303 = EDGE_CURVE('',#202296,#202304,#202306,.T.); +#202304 = VERTEX_POINT('',#202305); +#202305 = CARTESIAN_POINT('',(152.998882,-77.714285,1.585)); +#202306 = LINE('',#202307,#202308); +#202307 = CARTESIAN_POINT('',(152.998882,-77.607856,1.585)); +#202308 = VECTOR('',#202309,1.); +#202309 = DIRECTION('',(0.,-1.,0.)); +#202310 = ORIENTED_EDGE('',*,*,#202311,.T.); +#202311 = EDGE_CURVE('',#202304,#202312,#202314,.T.); +#202312 = VERTEX_POINT('',#202313); +#202313 = CARTESIAN_POINT('',(152.868882,-77.714285,1.585)); +#202314 = CIRCLE('',#202315,6.500000000092E-02); +#202315 = AXIS2_PLACEMENT_3D('',#202316,#202317,#202318); +#202316 = CARTESIAN_POINT('',(152.933882,-77.71428465513,1.585)); +#202317 = DIRECTION('',(-0.,0.,-1.)); +#202318 = DIRECTION('',(0.999999999986,-5.305658244295E-06,-0.)); +#202319 = ORIENTED_EDGE('',*,*,#202320,.T.); +#202320 = EDGE_CURVE('',#202312,#202088,#202321,.T.); +#202321 = LINE('',#202322,#202323); +#202322 = CARTESIAN_POINT('',(152.868882,-77.714285,1.585)); +#202323 = VECTOR('',#202324,1.); +#202324 = DIRECTION('',(0.,1.,0.)); +#202325 = PLANE('',#202326); +#202326 = AXIS2_PLACEMENT_3D('',#202327,#202328,#202329); +#202327 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202328 = DIRECTION('',(0.,0.,1.)); +#202329 = DIRECTION('',(1.,0.,-0.)); +#202330 = SHELL_BASED_SURFACE_MODEL('',(#202331)); +#202331 = OPEN_SHELL('',(#202332)); +#202332 = ADVANCED_FACE('',(#202333),#202435,.T.); +#202333 = FACE_BOUND('',#202334,.F.); +#202334 = EDGE_LOOP('',(#202335,#202346,#202354,#202363,#202371,#202379, + #202387,#202396,#202404,#202413,#202421,#202429)); +#202335 = ORIENTED_EDGE('',*,*,#202336,.T.); +#202336 = EDGE_CURVE('',#202337,#202339,#202341,.T.); +#202337 = VERTEX_POINT('',#202338); +#202338 = CARTESIAN_POINT('',(116.959597,-77.636428,1.585)); +#202339 = VERTEX_POINT('',#202340); +#202340 = CARTESIAN_POINT('',(116.959597,-77.506428,1.585)); +#202341 = CIRCLE('',#202342,6.500000000091E-02); +#202342 = AXIS2_PLACEMENT_3D('',#202343,#202344,#202345); +#202343 = CARTESIAN_POINT('',(116.95959734486,-77.571428,1.585)); +#202344 = DIRECTION('',(0.,0.,-1.)); +#202345 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#202346 = ORIENTED_EDGE('',*,*,#202347,.T.); +#202347 = EDGE_CURVE('',#202339,#202348,#202350,.T.); +#202348 = VERTEX_POINT('',#202349); +#202349 = CARTESIAN_POINT('',(117.859597,-77.506428,1.585)); +#202350 = LINE('',#202351,#202352); +#202351 = CARTESIAN_POINT('',(116.959597,-77.506428,1.585)); +#202352 = VECTOR('',#202353,1.); +#202353 = DIRECTION('',(1.,0.,0.)); +#202354 = ORIENTED_EDGE('',*,*,#202355,.T.); +#202355 = EDGE_CURVE('',#202348,#202356,#202358,.T.); +#202356 = VERTEX_POINT('',#202357); +#202357 = CARTESIAN_POINT('',(117.859597,-77.636428,1.585)); +#202358 = CIRCLE('',#202359,6.500000000091E-02); +#202359 = AXIS2_PLACEMENT_3D('',#202360,#202361,#202362); +#202360 = CARTESIAN_POINT('',(117.85959665513,-77.571428,1.585)); +#202361 = DIRECTION('',(0.,0.,-1.)); +#202362 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#202363 = ORIENTED_EDGE('',*,*,#202364,.T.); +#202364 = EDGE_CURVE('',#202356,#202365,#202367,.T.); +#202365 = VERTEX_POINT('',#202366); +#202366 = CARTESIAN_POINT('',(117.453168,-77.636428,1.585)); +#202367 = LINE('',#202368,#202369); +#202368 = CARTESIAN_POINT('',(117.859597,-77.636428,1.585)); +#202369 = VECTOR('',#202370,1.); +#202370 = DIRECTION('',(-1.,0.,0.)); +#202371 = ORIENTED_EDGE('',*,*,#202372,.T.); +#202372 = EDGE_CURVE('',#202365,#202373,#202375,.T.); +#202373 = VERTEX_POINT('',#202374); +#202374 = CARTESIAN_POINT('',(117.453168,-78.020714,1.585)); +#202375 = LINE('',#202376,#202377); +#202376 = CARTESIAN_POINT('',(117.453168,-77.636428,1.585)); +#202377 = VECTOR('',#202378,1.); +#202378 = DIRECTION('',(0.,-1.,0.)); +#202379 = ORIENTED_EDGE('',*,*,#202380,.T.); +#202380 = EDGE_CURVE('',#202373,#202381,#202383,.T.); +#202381 = VERTEX_POINT('',#202382); +#202382 = CARTESIAN_POINT('',(117.859597,-78.020714,1.585)); +#202383 = LINE('',#202384,#202385); +#202384 = CARTESIAN_POINT('',(117.453168,-78.020714,1.585)); +#202385 = VECTOR('',#202386,1.); +#202386 = DIRECTION('',(1.,0.,0.)); +#202387 = ORIENTED_EDGE('',*,*,#202388,.T.); +#202388 = EDGE_CURVE('',#202381,#202389,#202391,.T.); +#202389 = VERTEX_POINT('',#202390); +#202390 = CARTESIAN_POINT('',(117.859597,-78.150714,1.585)); +#202391 = CIRCLE('',#202392,6.500000000091E-02); +#202392 = AXIS2_PLACEMENT_3D('',#202393,#202394,#202395); +#202393 = CARTESIAN_POINT('',(117.85959665513,-78.085714,1.585)); +#202394 = DIRECTION('',(0.,0.,-1.)); +#202395 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#202396 = ORIENTED_EDGE('',*,*,#202397,.T.); +#202397 = EDGE_CURVE('',#202389,#202398,#202400,.T.); +#202398 = VERTEX_POINT('',#202399); +#202399 = CARTESIAN_POINT('',(116.959597,-78.150714,1.585)); +#202400 = LINE('',#202401,#202402); +#202401 = CARTESIAN_POINT('',(117.859597,-78.150714,1.585)); +#202402 = VECTOR('',#202403,1.); +#202403 = DIRECTION('',(-1.,0.,0.)); +#202404 = ORIENTED_EDGE('',*,*,#202405,.T.); +#202405 = EDGE_CURVE('',#202398,#202406,#202408,.T.); +#202406 = VERTEX_POINT('',#202407); +#202407 = CARTESIAN_POINT('',(116.959597,-78.020714,1.585)); +#202408 = CIRCLE('',#202409,6.500000000092E-02); +#202409 = AXIS2_PLACEMENT_3D('',#202410,#202411,#202412); +#202410 = CARTESIAN_POINT('',(116.95959734486,-78.085714,1.585)); +#202411 = DIRECTION('',(0.,0.,-1.)); +#202412 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#202413 = ORIENTED_EDGE('',*,*,#202414,.T.); +#202414 = EDGE_CURVE('',#202406,#202415,#202417,.T.); +#202415 = VERTEX_POINT('',#202416); +#202416 = CARTESIAN_POINT('',(117.323168,-78.020714,1.585)); +#202417 = LINE('',#202418,#202419); +#202418 = CARTESIAN_POINT('',(116.959597,-78.020714,1.585)); +#202419 = VECTOR('',#202420,1.); +#202420 = DIRECTION('',(1.,0.,0.)); +#202421 = ORIENTED_EDGE('',*,*,#202422,.T.); +#202422 = EDGE_CURVE('',#202415,#202423,#202425,.T.); +#202423 = VERTEX_POINT('',#202424); +#202424 = CARTESIAN_POINT('',(117.323168,-77.636428,1.585)); +#202425 = LINE('',#202426,#202427); +#202426 = CARTESIAN_POINT('',(117.323168,-78.020714,1.585)); +#202427 = VECTOR('',#202428,1.); +#202428 = DIRECTION('',(0.,1.,0.)); +#202429 = ORIENTED_EDGE('',*,*,#202430,.T.); +#202430 = EDGE_CURVE('',#202423,#202337,#202431,.T.); +#202431 = LINE('',#202432,#202433); +#202432 = CARTESIAN_POINT('',(117.323168,-77.636428,1.585)); +#202433 = VECTOR('',#202434,1.); +#202434 = DIRECTION('',(-1.,0.,0.)); +#202435 = PLANE('',#202436); +#202436 = AXIS2_PLACEMENT_3D('',#202437,#202438,#202439); +#202437 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202438 = DIRECTION('',(0.,0.,1.)); +#202439 = DIRECTION('',(1.,0.,-0.)); +#202440 = SHELL_BASED_SURFACE_MODEL('',(#202441)); +#202441 = OPEN_SHELL('',(#202442)); +#202442 = ADVANCED_FACE('',(#202443),#202629,.T.); +#202443 = FACE_BOUND('',#202444,.F.); +#202444 = EDGE_LOOP('',(#202445,#202456,#202464,#202472,#202480,#202488, + #202497,#202505,#202514,#202522,#202531,#202539,#202548,#202556, + #202564,#202572,#202581,#202589,#202597,#202606,#202614,#202623)); +#202445 = ORIENTED_EDGE('',*,*,#202446,.T.); +#202446 = EDGE_CURVE('',#202447,#202449,#202451,.T.); +#202447 = VERTEX_POINT('',#202448); +#202448 = CARTESIAN_POINT('',(155.240369,-77.613914,1.585)); +#202449 = VERTEX_POINT('',#202450); +#202450 = CARTESIAN_POINT('',(155.459225,-77.395057,1.585)); +#202451 = CIRCLE('',#202452,0.308109459502); +#202452 = AXIS2_PLACEMENT_3D('',#202453,#202454,#202455); +#202453 = CARTESIAN_POINT('',(155.53818845359,-77.69287609279,1.585)); +#202454 = DIRECTION('',(0.,0.,-1.)); +#202455 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#202456 = ORIENTED_EDGE('',*,*,#202457,.T.); +#202457 = EDGE_CURVE('',#202449,#202458,#202460,.T.); +#202458 = VERTEX_POINT('',#202459); +#202459 = CARTESIAN_POINT('',(155.691361,-77.392777,1.585)); +#202460 = LINE('',#202461,#202462); +#202461 = CARTESIAN_POINT('',(155.459225,-77.395057,1.585)); +#202462 = VECTOR('',#202463,1.); +#202463 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#202464 = ORIENTED_EDGE('',*,*,#202465,.T.); +#202465 = EDGE_CURVE('',#202458,#202466,#202468,.T.); +#202466 = VERTEX_POINT('',#202467); +#202467 = CARTESIAN_POINT('',(155.717237,-77.399004,1.585)); +#202468 = LINE('',#202469,#202470); +#202469 = CARTESIAN_POINT('',(155.691361,-77.392777,1.585)); +#202470 = VECTOR('',#202471,1.); +#202471 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#202472 = ORIENTED_EDGE('',*,*,#202473,.T.); +#202473 = EDGE_CURVE('',#202466,#202474,#202476,.T.); +#202474 = VERTEX_POINT('',#202475); +#202475 = CARTESIAN_POINT('',(155.819844,-77.454037,1.585)); +#202476 = LINE('',#202477,#202478); +#202477 = CARTESIAN_POINT('',(155.717237,-77.399004,1.585)); +#202478 = VECTOR('',#202479,1.); +#202479 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#202480 = ORIENTED_EDGE('',*,*,#202481,.T.); +#202481 = EDGE_CURVE('',#202474,#202482,#202484,.T.); +#202482 = VERTEX_POINT('',#202483); +#202483 = CARTESIAN_POINT('',(155.874878,-77.513788,1.585)); +#202484 = LINE('',#202485,#202486); +#202485 = CARTESIAN_POINT('',(155.819844,-77.454037,1.585)); +#202486 = VECTOR('',#202487,1.); +#202487 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#202488 = ORIENTED_EDGE('',*,*,#202489,.T.); +#202489 = EDGE_CURVE('',#202482,#202490,#202492,.T.); +#202490 = VERTEX_POINT('',#202491); +#202491 = CARTESIAN_POINT('',(155.868491,-78.008725,1.585)); +#202492 = CIRCLE('',#202493,0.457783772261); +#202493 = AXIS2_PLACEMENT_3D('',#202494,#202495,#202496); +#202494 = CARTESIAN_POINT('',(155.48659953493,-77.75628710455,1.585)); +#202495 = DIRECTION('',(0.,0.,-1.)); +#202496 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#202497 = ORIENTED_EDGE('',*,*,#202498,.T.); +#202498 = EDGE_CURVE('',#202490,#202499,#202501,.T.); +#202499 = VERTEX_POINT('',#202500); +#202500 = CARTESIAN_POINT('',(155.819843,-78.060247,1.585)); +#202501 = LINE('',#202502,#202503); +#202502 = CARTESIAN_POINT('',(155.868491,-78.008725,1.585)); +#202503 = VECTOR('',#202504,1.); +#202504 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#202505 = ORIENTED_EDGE('',*,*,#202506,.T.); +#202506 = EDGE_CURVE('',#202499,#202507,#202509,.T.); +#202507 = VERTEX_POINT('',#202508); +#202508 = CARTESIAN_POINT('',(155.727921,-77.968323,1.585)); +#202509 = CIRCLE('',#202510,6.499937665135E-02); +#202510 = AXIS2_PLACEMENT_3D('',#202511,#202512,#202513); +#202511 = CARTESIAN_POINT('',(155.77388218097,-78.01428481902,1.585)); +#202512 = DIRECTION('',(-0.,0.,-1.)); +#202513 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#202514 = ORIENTED_EDGE('',*,*,#202515,.T.); +#202515 = EDGE_CURVE('',#202507,#202516,#202518,.T.); +#202516 = VERTEX_POINT('',#202517); +#202517 = CARTESIAN_POINT('',(155.763319,-77.932925,1.585)); +#202518 = LINE('',#202519,#202520); +#202519 = CARTESIAN_POINT('',(155.727921,-77.968323,1.585)); +#202520 = VECTOR('',#202521,1.); +#202521 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#202522 = ORIENTED_EDGE('',*,*,#202523,.T.); +#202523 = EDGE_CURVE('',#202516,#202524,#202526,.T.); +#202524 = VERTEX_POINT('',#202525); +#202525 = CARTESIAN_POINT('',(155.763319,-77.58136,1.585)); +#202526 = CIRCLE('',#202527,0.325008683278); +#202527 = AXIS2_PLACEMENT_3D('',#202528,#202529,#202530); +#202528 = CARTESIAN_POINT('',(155.489949,-77.7571425,1.585)); +#202529 = DIRECTION('',(0.,-0.,1.)); +#202530 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#202531 = ORIENTED_EDGE('',*,*,#202532,.T.); +#202532 = EDGE_CURVE('',#202524,#202533,#202535,.T.); +#202533 = VERTEX_POINT('',#202534); +#202534 = CARTESIAN_POINT('',(155.735379,-77.55342,1.585)); +#202535 = LINE('',#202536,#202537); +#202536 = CARTESIAN_POINT('',(155.763319,-77.58136,1.585)); +#202537 = VECTOR('',#202538,1.); +#202538 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202539 = ORIENTED_EDGE('',*,*,#202540,.T.); +#202540 = EDGE_CURVE('',#202533,#202541,#202543,.T.); +#202541 = VERTEX_POINT('',#202542); +#202542 = CARTESIAN_POINT('',(155.426671,-77.55342,1.585)); +#202543 = CIRCLE('',#202544,0.277419178293); +#202544 = AXIS2_PLACEMENT_3D('',#202545,#202546,#202547); +#202545 = CARTESIAN_POINT('',(155.581025,-77.783933,1.585)); +#202546 = DIRECTION('',(0.,0.,1.)); +#202547 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#202548 = ORIENTED_EDGE('',*,*,#202549,.T.); +#202549 = EDGE_CURVE('',#202541,#202550,#202552,.T.); +#202550 = VERTEX_POINT('',#202551); +#202551 = CARTESIAN_POINT('',(155.398733,-77.581358,1.585)); +#202552 = LINE('',#202553,#202554); +#202553 = CARTESIAN_POINT('',(155.426671,-77.55342,1.585)); +#202554 = VECTOR('',#202555,1.); +#202555 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#202556 = ORIENTED_EDGE('',*,*,#202557,.T.); +#202557 = EDGE_CURVE('',#202550,#202558,#202560,.T.); +#202558 = VERTEX_POINT('',#202559); +#202559 = CARTESIAN_POINT('',(155.367454,-77.643916,1.585)); +#202560 = LINE('',#202561,#202562); +#202561 = CARTESIAN_POINT('',(155.398733,-77.581358,1.585)); +#202562 = VECTOR('',#202563,1.); +#202563 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#202564 = ORIENTED_EDGE('',*,*,#202565,.T.); +#202565 = EDGE_CURVE('',#202558,#202566,#202568,.T.); +#202566 = VERTEX_POINT('',#202567); +#202567 = CARTESIAN_POINT('',(155.367454,-77.757142,1.585)); +#202568 = LINE('',#202569,#202570); +#202569 = CARTESIAN_POINT('',(155.367454,-77.643916,1.585)); +#202570 = VECTOR('',#202571,1.); +#202571 = DIRECTION('',(0.,-1.,0.)); +#202572 = ORIENTED_EDGE('',*,*,#202573,.T.); +#202573 = EDGE_CURVE('',#202566,#202574,#202576,.T.); +#202574 = VERTEX_POINT('',#202575); +#202575 = CARTESIAN_POINT('',(155.259652,-77.80606,1.585)); +#202576 = CIRCLE('',#202577,6.500010429715E-02); +#202577 = AXIS2_PLACEMENT_3D('',#202578,#202579,#202580); +#202578 = CARTESIAN_POINT('',(155.3024538957,-77.75714158544,1.585)); +#202579 = DIRECTION('',(-0.,0.,-1.)); +#202580 = DIRECTION('',(0.99999999998,-6.37778922417E-06,-0.)); +#202581 = ORIENTED_EDGE('',*,*,#202582,.T.); +#202582 = EDGE_CURVE('',#202574,#202583,#202585,.T.); +#202583 = VERTEX_POINT('',#202584); +#202584 = CARTESIAN_POINT('',(155.024597,-77.600386,1.585)); +#202585 = LINE('',#202586,#202587); +#202586 = CARTESIAN_POINT('',(155.259652,-77.80606,1.585)); +#202587 = VECTOR('',#202588,1.); +#202588 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#202589 = ORIENTED_EDGE('',*,*,#202590,.T.); +#202590 = EDGE_CURVE('',#202583,#202591,#202593,.T.); +#202591 = VERTEX_POINT('',#202592); +#202592 = CARTESIAN_POINT('',(155.024597,-78.014285,1.585)); +#202593 = LINE('',#202594,#202595); +#202594 = CARTESIAN_POINT('',(155.024597,-77.600386,1.585)); +#202595 = VECTOR('',#202596,1.); +#202596 = DIRECTION('',(0.,-1.,0.)); +#202597 = ORIENTED_EDGE('',*,*,#202598,.T.); +#202598 = EDGE_CURVE('',#202591,#202599,#202601,.T.); +#202599 = VERTEX_POINT('',#202600); +#202600 = CARTESIAN_POINT('',(154.894597,-78.014285,1.585)); +#202601 = CIRCLE('',#202602,6.500000000092E-02); +#202602 = AXIS2_PLACEMENT_3D('',#202603,#202604,#202605); +#202603 = CARTESIAN_POINT('',(154.959597,-78.01428465513,1.585)); +#202604 = DIRECTION('',(-0.,0.,-1.)); +#202605 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#202606 = ORIENTED_EDGE('',*,*,#202607,.T.); +#202607 = EDGE_CURVE('',#202599,#202608,#202610,.T.); +#202608 = VERTEX_POINT('',#202609); +#202609 = CARTESIAN_POINT('',(154.894597,-77.457142,1.585)); +#202610 = LINE('',#202611,#202612); +#202611 = CARTESIAN_POINT('',(154.894597,-78.014285,1.585)); +#202612 = VECTOR('',#202613,1.); +#202613 = DIRECTION('',(0.,1.,0.)); +#202614 = ORIENTED_EDGE('',*,*,#202615,.T.); +#202615 = EDGE_CURVE('',#202608,#202616,#202618,.T.); +#202616 = VERTEX_POINT('',#202617); +#202617 = CARTESIAN_POINT('',(155.0024,-77.408225,1.585)); +#202618 = CIRCLE('',#202619,6.500002288385E-02); +#202619 = AXIS2_PLACEMENT_3D('',#202620,#202621,#202622); +#202620 = CARTESIAN_POINT('',(154.95959702288,-77.45714236015,1.585)); +#202621 = DIRECTION('',(0.,0.,-1.)); +#202622 = DIRECTION('',(-0.999999999985,5.540887478609E-06,0.)); +#202623 = ORIENTED_EDGE('',*,*,#202624,.T.); +#202624 = EDGE_CURVE('',#202616,#202447,#202625,.T.); +#202625 = LINE('',#202626,#202627); +#202626 = CARTESIAN_POINT('',(155.0024,-77.408225,1.585)); +#202627 = VECTOR('',#202628,1.); +#202628 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#202629 = PLANE('',#202630); +#202630 = AXIS2_PLACEMENT_3D('',#202631,#202632,#202633); +#202631 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202632 = DIRECTION('',(0.,0.,1.)); +#202633 = DIRECTION('',(1.,0.,-0.)); +#202634 = SHELL_BASED_SURFACE_MODEL('',(#202635)); +#202635 = OPEN_SHELL('',(#202636)); +#202636 = ADVANCED_FACE('',(#202637),#202909,.T.); +#202637 = FACE_BOUND('',#202638,.F.); +#202638 = EDGE_LOOP('',(#202639,#202650,#202658,#202666,#202675,#202683, + #202691,#202699,#202707,#202715,#202723,#202731,#202740,#202748, + #202756,#202764,#202772,#202780,#202789,#202797,#202805,#202814, + #202822,#202830,#202838,#202846,#202854,#202862,#202870,#202879, + #202887,#202895,#202903)); +#202639 = ORIENTED_EDGE('',*,*,#202640,.T.); +#202640 = EDGE_CURVE('',#202641,#202643,#202645,.T.); +#202641 = VERTEX_POINT('',#202642); +#202642 = CARTESIAN_POINT('',(142.24079,-77.458016,1.585)); +#202643 = VERTEX_POINT('',#202644); +#202644 = CARTESIAN_POINT('',(142.364119,-77.499125,1.585)); +#202645 = CIRCLE('',#202646,6.499998485138E-02); +#202646 = AXIS2_PLACEMENT_3D('',#202647,#202648,#202649); +#202647 = CARTESIAN_POINT('',(142.30245436584,-77.47857090248,1.585)); +#202648 = DIRECTION('',(0.,0.,-1.)); +#202649 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#202650 = ORIENTED_EDGE('',*,*,#202651,.T.); +#202651 = EDGE_CURVE('',#202643,#202652,#202654,.T.); +#202652 = VERTEX_POINT('',#202653); +#202653 = CARTESIAN_POINT('',(142.324597,-77.61769,1.585)); +#202654 = LINE('',#202655,#202656); +#202655 = CARTESIAN_POINT('',(142.364119,-77.499125,1.585)); +#202656 = VECTOR('',#202657,1.); +#202657 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#202658 = ORIENTED_EDGE('',*,*,#202659,.T.); +#202659 = EDGE_CURVE('',#202652,#202660,#202662,.T.); +#202660 = VERTEX_POINT('',#202661); +#202661 = CARTESIAN_POINT('',(142.324597,-77.806083,1.585)); +#202662 = LINE('',#202663,#202664); +#202663 = CARTESIAN_POINT('',(142.324597,-77.61769,1.585)); +#202664 = VECTOR('',#202665,1.); +#202665 = DIRECTION('',(0.,-1.,0.)); +#202666 = ORIENTED_EDGE('',*,*,#202667,.T.); +#202667 = EDGE_CURVE('',#202660,#202668,#202670,.T.); +#202668 = VERTEX_POINT('',#202669); +#202669 = CARTESIAN_POINT('',(142.44637,-77.927857,1.585)); +#202670 = CIRCLE('',#202671,0.170995888391); +#202671 = AXIS2_PLACEMENT_3D('',#202672,#202673,#202674); +#202672 = CARTESIAN_POINT('',(142.4899473225,-77.76250703534,1.585)); +#202673 = DIRECTION('',(0.,0.,1.)); +#202674 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#202675 = ORIENTED_EDGE('',*,*,#202676,.T.); +#202676 = EDGE_CURVE('',#202668,#202677,#202679,.T.); +#202677 = VERTEX_POINT('',#202678); +#202678 = CARTESIAN_POINT('',(142.501395,-77.927857,1.585)); +#202679 = LINE('',#202680,#202681); +#202680 = CARTESIAN_POINT('',(142.44637,-77.927857,1.585)); +#202681 = VECTOR('',#202682,1.); +#202682 = DIRECTION('',(1.,0.,0.)); +#202683 = ORIENTED_EDGE('',*,*,#202684,.T.); +#202684 = EDGE_CURVE('',#202677,#202685,#202687,.T.); +#202685 = VERTEX_POINT('',#202686); +#202686 = CARTESIAN_POINT('',(142.563951,-77.896579,1.585)); +#202687 = LINE('',#202688,#202689); +#202688 = CARTESIAN_POINT('',(142.501395,-77.927857,1.585)); +#202689 = VECTOR('',#202690,1.); +#202690 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#202691 = ORIENTED_EDGE('',*,*,#202692,.T.); +#202692 = EDGE_CURVE('',#202685,#202693,#202695,.T.); +#202693 = VERTEX_POINT('',#202694); +#202694 = CARTESIAN_POINT('',(142.591889,-77.86864,1.585)); +#202695 = LINE('',#202696,#202697); +#202696 = CARTESIAN_POINT('',(142.563951,-77.896579,1.585)); +#202697 = VECTOR('',#202698,1.); +#202698 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#202699 = ORIENTED_EDGE('',*,*,#202700,.T.); +#202700 = EDGE_CURVE('',#202693,#202701,#202703,.T.); +#202701 = VERTEX_POINT('',#202702); +#202702 = CARTESIAN_POINT('',(142.626839,-77.798739,1.585)); +#202703 = LINE('',#202704,#202705); +#202704 = CARTESIAN_POINT('',(142.591889,-77.86864,1.585)); +#202705 = VECTOR('',#202706,1.); +#202706 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#202707 = ORIENTED_EDGE('',*,*,#202708,.T.); +#202708 = EDGE_CURVE('',#202701,#202709,#202711,.T.); +#202709 = VERTEX_POINT('',#202710); +#202710 = CARTESIAN_POINT('',(142.672887,-77.620931,1.585)); +#202711 = LINE('',#202712,#202713); +#202712 = CARTESIAN_POINT('',(142.626839,-77.798739,1.585)); +#202713 = VECTOR('',#202714,1.); +#202714 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#202715 = ORIENTED_EDGE('',*,*,#202716,.T.); +#202716 = EDGE_CURVE('',#202709,#202717,#202719,.T.); +#202717 = VERTEX_POINT('',#202718); +#202718 = CARTESIAN_POINT('',(142.72792,-77.518324,1.585)); +#202719 = LINE('',#202720,#202721); +#202720 = CARTESIAN_POINT('',(142.672887,-77.620931,1.585)); +#202721 = VECTOR('',#202722,1.); +#202722 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#202723 = ORIENTED_EDGE('',*,*,#202724,.T.); +#202724 = EDGE_CURVE('',#202717,#202725,#202727,.T.); +#202725 = VERTEX_POINT('',#202726); +#202726 = CARTESIAN_POINT('',(142.787671,-77.46329,1.585)); +#202727 = LINE('',#202728,#202729); +#202728 = CARTESIAN_POINT('',(142.72792,-77.518324,1.585)); +#202729 = VECTOR('',#202730,1.); +#202730 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#202731 = ORIENTED_EDGE('',*,*,#202732,.T.); +#202732 = EDGE_CURVE('',#202725,#202733,#202735,.T.); +#202733 = VERTEX_POINT('',#202734); +#202734 = CARTESIAN_POINT('',(143.017237,-77.420433,1.585)); +#202735 = CIRCLE('',#202736,0.258971949836); +#202736 = AXIS2_PLACEMENT_3D('',#202737,#202738,#202739); +#202737 = CARTESIAN_POINT('',(142.94487456064,-77.66908968736,1.585)); +#202738 = DIRECTION('',(0.,0.,-1.)); +#202739 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#202740 = ORIENTED_EDGE('',*,*,#202741,.T.); +#202741 = EDGE_CURVE('',#202733,#202742,#202744,.T.); +#202742 = VERTEX_POINT('',#202743); +#202743 = CARTESIAN_POINT('',(143.119844,-77.475466,1.585)); +#202744 = LINE('',#202745,#202746); +#202745 = CARTESIAN_POINT('',(143.017237,-77.420433,1.585)); +#202746 = VECTOR('',#202747,1.); +#202747 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#202748 = ORIENTED_EDGE('',*,*,#202749,.T.); +#202749 = EDGE_CURVE('',#202742,#202750,#202752,.T.); +#202750 = VERTEX_POINT('',#202751); +#202751 = CARTESIAN_POINT('',(143.174878,-77.535217,1.585)); +#202752 = LINE('',#202753,#202754); +#202753 = CARTESIAN_POINT('',(143.119844,-77.475466,1.585)); +#202754 = VECTOR('',#202755,1.); +#202755 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#202756 = ORIENTED_EDGE('',*,*,#202757,.T.); +#202757 = EDGE_CURVE('',#202750,#202758,#202760,.T.); +#202758 = VERTEX_POINT('',#202759); +#202759 = CARTESIAN_POINT('',(143.221681,-77.635343,1.585)); +#202760 = LINE('',#202761,#202762); +#202761 = CARTESIAN_POINT('',(143.174878,-77.535217,1.585)); +#202762 = VECTOR('',#202763,1.); +#202763 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#202764 = ORIENTED_EDGE('',*,*,#202765,.T.); +#202765 = EDGE_CURVE('',#202758,#202766,#202768,.T.); +#202766 = VERTEX_POINT('',#202767); +#202767 = CARTESIAN_POINT('',(143.222563,-77.874508,1.585)); +#202768 = LINE('',#202769,#202770); +#202769 = CARTESIAN_POINT('',(143.221681,-77.635343,1.585)); +#202770 = VECTOR('',#202771,1.); +#202771 = DIRECTION('',(3.687805500128E-03,-0.999993200022,0.)); +#202772 = ORIENTED_EDGE('',*,*,#202773,.T.); +#202773 = EDGE_CURVE('',#202766,#202774,#202776,.T.); +#202774 = VERTEX_POINT('',#202775); +#202775 = CARTESIAN_POINT('',(143.178404,-78.013412,1.585)); +#202776 = LINE('',#202777,#202778); +#202777 = CARTESIAN_POINT('',(143.222563,-77.874508,1.585)); +#202778 = VECTOR('',#202779,1.); +#202779 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#202780 = ORIENTED_EDGE('',*,*,#202781,.T.); +#202781 = EDGE_CURVE('',#202774,#202782,#202784,.T.); +#202782 = VERTEX_POINT('',#202783); +#202783 = CARTESIAN_POINT('',(143.055076,-77.972302,1.585)); +#202784 = CIRCLE('',#202785,6.499966862258E-02); +#202785 = AXIS2_PLACEMENT_3D('',#202786,#202787,#202788); +#202786 = CARTESIAN_POINT('',(143.11674006734,-77.99285679797,1.585)); +#202787 = DIRECTION('',(-0.,0.,-1.)); +#202788 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#202789 = ORIENTED_EDGE('',*,*,#202790,.T.); +#202790 = EDGE_CURVE('',#202782,#202791,#202793,.T.); +#202791 = VERTEX_POINT('',#202792); +#202792 = CARTESIAN_POINT('',(143.094597,-77.853739,1.585)); +#202793 = LINE('',#202794,#202795); +#202794 = CARTESIAN_POINT('',(143.055076,-77.972302,1.585)); +#202795 = VECTOR('',#202796,1.); +#202796 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#202797 = ORIENTED_EDGE('',*,*,#202798,.T.); +#202798 = EDGE_CURVE('',#202791,#202799,#202801,.T.); +#202799 = VERTEX_POINT('',#202800); +#202800 = CARTESIAN_POINT('',(143.094597,-77.665345,1.585)); +#202801 = LINE('',#202802,#202803); +#202802 = CARTESIAN_POINT('',(143.094597,-77.853739,1.585)); +#202803 = VECTOR('',#202804,1.); +#202804 = DIRECTION('',(0.,1.,0.)); +#202805 = ORIENTED_EDGE('',*,*,#202806,.T.); +#202806 = EDGE_CURVE('',#202799,#202807,#202809,.T.); +#202807 = VERTEX_POINT('',#202808); +#202808 = CARTESIAN_POINT('',(142.972823,-77.543571,1.585)); +#202809 = CIRCLE('',#202810,0.170999251022); +#202810 = AXIS2_PLACEMENT_3D('',#202811,#202812,#202813); +#202811 = CARTESIAN_POINT('',(142.929244,-77.708924,1.585)); +#202812 = DIRECTION('',(0.,0.,1.)); +#202813 = DIRECTION('',(0.966980843553,0.254849069452,-0.)); +#202814 = ORIENTED_EDGE('',*,*,#202815,.T.); +#202815 = EDGE_CURVE('',#202807,#202816,#202818,.T.); +#202816 = VERTEX_POINT('',#202817); +#202817 = CARTESIAN_POINT('',(142.917799,-77.543571,1.585)); +#202818 = LINE('',#202819,#202820); +#202819 = CARTESIAN_POINT('',(142.972823,-77.543571,1.585)); +#202820 = VECTOR('',#202821,1.); +#202821 = DIRECTION('',(-1.,0.,0.)); +#202822 = ORIENTED_EDGE('',*,*,#202823,.T.); +#202823 = EDGE_CURVE('',#202816,#202824,#202826,.T.); +#202824 = VERTEX_POINT('',#202825); +#202825 = CARTESIAN_POINT('',(142.855243,-77.574849,1.585)); +#202826 = LINE('',#202827,#202828); +#202827 = CARTESIAN_POINT('',(142.917799,-77.543571,1.585)); +#202828 = VECTOR('',#202829,1.); +#202829 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#202830 = ORIENTED_EDGE('',*,*,#202831,.T.); +#202831 = EDGE_CURVE('',#202824,#202832,#202834,.T.); +#202832 = VERTEX_POINT('',#202833); +#202833 = CARTESIAN_POINT('',(142.827303,-77.602789,1.585)); +#202834 = LINE('',#202835,#202836); +#202835 = CARTESIAN_POINT('',(142.855243,-77.574849,1.585)); +#202836 = VECTOR('',#202837,1.); +#202837 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#202838 = ORIENTED_EDGE('',*,*,#202839,.T.); +#202839 = EDGE_CURVE('',#202832,#202840,#202842,.T.); +#202840 = VERTEX_POINT('',#202841); +#202841 = CARTESIAN_POINT('',(142.792353,-77.672689,1.585)); +#202842 = LINE('',#202843,#202844); +#202843 = CARTESIAN_POINT('',(142.827303,-77.602789,1.585)); +#202844 = VECTOR('',#202845,1.); +#202845 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#202846 = ORIENTED_EDGE('',*,*,#202847,.T.); +#202847 = EDGE_CURVE('',#202840,#202848,#202850,.T.); +#202848 = VERTEX_POINT('',#202849); +#202849 = CARTESIAN_POINT('',(142.746306,-77.850497,1.585)); +#202850 = LINE('',#202851,#202852); +#202851 = CARTESIAN_POINT('',(142.792353,-77.672689,1.585)); +#202852 = VECTOR('',#202853,1.); +#202853 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#202854 = ORIENTED_EDGE('',*,*,#202855,.T.); +#202855 = EDGE_CURVE('',#202848,#202856,#202858,.T.); +#202856 = VERTEX_POINT('',#202857); +#202857 = CARTESIAN_POINT('',(142.691273,-77.953105,1.585)); +#202858 = LINE('',#202859,#202860); +#202859 = CARTESIAN_POINT('',(142.746306,-77.850497,1.585)); +#202860 = VECTOR('',#202861,1.); +#202861 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#202862 = ORIENTED_EDGE('',*,*,#202863,.T.); +#202863 = EDGE_CURVE('',#202856,#202864,#202866,.T.); +#202864 = VERTEX_POINT('',#202865); +#202865 = CARTESIAN_POINT('',(142.631523,-78.008138,1.585)); +#202866 = LINE('',#202867,#202868); +#202867 = CARTESIAN_POINT('',(142.691273,-77.953105,1.585)); +#202868 = VECTOR('',#202869,1.); +#202869 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#202870 = ORIENTED_EDGE('',*,*,#202871,.T.); +#202871 = EDGE_CURVE('',#202864,#202872,#202874,.T.); +#202872 = VERTEX_POINT('',#202873); +#202873 = CARTESIAN_POINT('',(142.308013,-78.001751,1.585)); +#202874 = CIRCLE('',#202875,0.260197694649); +#202875 = AXIS2_PLACEMENT_3D('',#202876,#202877,#202878); +#202876 = CARTESIAN_POINT('',(142.47379048924,-77.80120009783,1.585)); +#202877 = DIRECTION('',(-0.,0.,-1.)); +#202878 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#202879 = ORIENTED_EDGE('',*,*,#202880,.T.); +#202880 = EDGE_CURVE('',#202872,#202881,#202883,.T.); +#202881 = VERTEX_POINT('',#202882); +#202882 = CARTESIAN_POINT('',(142.250702,-77.94444,1.585)); +#202883 = LINE('',#202884,#202885); +#202884 = CARTESIAN_POINT('',(142.308013,-78.001751,1.585)); +#202885 = VECTOR('',#202886,1.); +#202886 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202887 = ORIENTED_EDGE('',*,*,#202888,.T.); +#202888 = EDGE_CURVE('',#202881,#202889,#202891,.T.); +#202889 = VERTEX_POINT('',#202890); +#202890 = CARTESIAN_POINT('',(142.197512,-77.836084,1.585)); +#202891 = LINE('',#202892,#202893); +#202892 = CARTESIAN_POINT('',(142.250702,-77.94444,1.585)); +#202893 = VECTOR('',#202894,1.); +#202894 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#202895 = ORIENTED_EDGE('',*,*,#202896,.T.); +#202896 = EDGE_CURVE('',#202889,#202897,#202899,.T.); +#202897 = VERTEX_POINT('',#202898); +#202898 = CARTESIAN_POINT('',(142.19663,-77.59692,1.585)); +#202899 = LINE('',#202900,#202901); +#202900 = CARTESIAN_POINT('',(142.197512,-77.836084,1.585)); +#202901 = VECTOR('',#202902,1.); +#202902 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#202903 = ORIENTED_EDGE('',*,*,#202904,.T.); +#202904 = EDGE_CURVE('',#202897,#202641,#202905,.T.); +#202905 = LINE('',#202906,#202907); +#202906 = CARTESIAN_POINT('',(142.19663,-77.59692,1.585)); +#202907 = VECTOR('',#202908,1.); +#202908 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#202909 = PLANE('',#202910); +#202910 = AXIS2_PLACEMENT_3D('',#202911,#202912,#202913); +#202911 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202912 = DIRECTION('',(0.,0.,1.)); +#202913 = DIRECTION('',(1.,0.,-0.)); +#202914 = SHELL_BASED_SURFACE_MODEL('',(#202915)); +#202915 = OPEN_SHELL('',(#202916)); +#202916 = ADVANCED_FACE('',(#202917),#202961,.T.); +#202917 = FACE_BOUND('',#202918,.F.); +#202918 = EDGE_LOOP('',(#202919,#202930,#202938,#202947,#202955)); +#202919 = ORIENTED_EDGE('',*,*,#202920,.T.); +#202920 = EDGE_CURVE('',#202921,#202923,#202925,.T.); +#202921 = VERTEX_POINT('',#202922); +#202922 = CARTESIAN_POINT('',(119.856688,-77.282269,1.585)); +#202923 = VERTEX_POINT('',#202924); +#202924 = CARTESIAN_POINT('',(119.98174,-77.307143,1.585)); +#202925 = CIRCLE('',#202926,6.499988811649E-02); +#202926 = AXIS2_PLACEMENT_3D('',#202927,#202928,#202929); +#202927 = CARTESIAN_POINT('',(119.91674011188,-77.3071432701,1.585)); +#202928 = DIRECTION('',(0.,0.,-1.)); +#202929 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#202930 = ORIENTED_EDGE('',*,*,#202931,.T.); +#202931 = EDGE_CURVE('',#202923,#202932,#202934,.T.); +#202932 = VERTEX_POINT('',#202933); +#202933 = CARTESIAN_POINT('',(119.98174,-77.992857,1.585)); +#202934 = LINE('',#202935,#202936); +#202935 = CARTESIAN_POINT('',(119.98174,-77.307143,1.585)); +#202936 = VECTOR('',#202937,1.); +#202937 = DIRECTION('',(0.,-1.,0.)); +#202938 = ORIENTED_EDGE('',*,*,#202939,.T.); +#202939 = EDGE_CURVE('',#202932,#202940,#202942,.T.); +#202940 = VERTEX_POINT('',#202941); +#202941 = CARTESIAN_POINT('',(119.85174,-77.992857,1.585)); +#202942 = CIRCLE('',#202943,6.500000000091E-02); +#202943 = AXIS2_PLACEMENT_3D('',#202944,#202945,#202946); +#202944 = CARTESIAN_POINT('',(119.91674,-77.99285665513,1.585)); +#202945 = DIRECTION('',(-0.,0.,-1.)); +#202946 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#202947 = ORIENTED_EDGE('',*,*,#202948,.T.); +#202948 = EDGE_CURVE('',#202940,#202949,#202951,.T.); +#202949 = VERTEX_POINT('',#202950); +#202950 = CARTESIAN_POINT('',(119.85174,-77.307143,1.585)); +#202951 = LINE('',#202952,#202953); +#202952 = CARTESIAN_POINT('',(119.85174,-77.992857,1.585)); +#202953 = VECTOR('',#202954,1.); +#202954 = DIRECTION('',(0.,1.,0.)); +#202955 = ORIENTED_EDGE('',*,*,#202956,.T.); +#202956 = EDGE_CURVE('',#202949,#202921,#202957,.T.); +#202957 = LINE('',#202958,#202959); +#202958 = CARTESIAN_POINT('',(119.85174,-77.307143,1.585)); +#202959 = VECTOR('',#202960,1.); +#202960 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#202961 = PLANE('',#202962); +#202962 = AXIS2_PLACEMENT_3D('',#202963,#202964,#202965); +#202963 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202964 = DIRECTION('',(0.,0.,1.)); +#202965 = DIRECTION('',(1.,0.,-0.)); +#202966 = SHELL_BASED_SURFACE_MODEL('',(#202967)); +#202967 = OPEN_SHELL('',(#202968)); +#202968 = ADVANCED_FACE('',(#202969,#203103),#203162,.T.); +#202969 = FACE_BOUND('',#202970,.F.); +#202970 = EDGE_LOOP('',(#202971,#202982,#202990,#202998,#203006,#203014, + #203022,#203031,#203039,#203047,#203055,#203064,#203072,#203081, + #203089,#203097)); +#202971 = ORIENTED_EDGE('',*,*,#202972,.T.); +#202972 = EDGE_CURVE('',#202973,#202975,#202977,.T.); +#202973 = VERTEX_POINT('',#202974); +#202974 = CARTESIAN_POINT('',(128.508013,-77.462533,1.585)); +#202975 = VERTEX_POINT('',#202976); +#202976 = CARTESIAN_POINT('',(128.788666,-77.41329,1.585)); +#202977 = CIRCLE('',#202978,0.327183487819); +#202978 = AXIS2_PLACEMENT_3D('',#202979,#202980,#202981); +#202979 = CARTESIAN_POINT('',(128.69924076591,-77.72801553472,1.585)); +#202980 = DIRECTION('',(0.,0.,-1.)); +#202981 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#202982 = ORIENTED_EDGE('',*,*,#202983,.T.); +#202983 = EDGE_CURVE('',#202975,#202984,#202986,.T.); +#202984 = VERTEX_POINT('',#202985); +#202985 = CARTESIAN_POINT('',(128.891273,-77.468323,1.585)); +#202986 = LINE('',#202987,#202988); +#202987 = CARTESIAN_POINT('',(128.788666,-77.41329,1.585)); +#202988 = VECTOR('',#202989,1.); +#202989 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#202990 = ORIENTED_EDGE('',*,*,#202991,.T.); +#202991 = EDGE_CURVE('',#202984,#202992,#202994,.T.); +#202992 = VERTEX_POINT('',#202993); +#202993 = CARTESIAN_POINT('',(128.946306,-77.528073,1.585)); +#202994 = LINE('',#202995,#202996); +#202995 = CARTESIAN_POINT('',(128.891273,-77.468323,1.585)); +#202996 = VECTOR('',#202997,1.); +#202997 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#202998 = ORIENTED_EDGE('',*,*,#202999,.T.); +#202999 = EDGE_CURVE('',#202992,#203000,#203002,.T.); +#203000 = VERTEX_POINT('',#203001); +#203001 = CARTESIAN_POINT('',(128.993109,-77.6282,1.585)); +#203002 = LINE('',#203003,#203004); +#203003 = CARTESIAN_POINT('',(128.946306,-77.528073,1.585)); +#203004 = VECTOR('',#203005,1.); +#203005 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#203006 = ORIENTED_EDGE('',*,*,#203007,.T.); +#203007 = EDGE_CURVE('',#203000,#203008,#203010,.T.); +#203008 = VERTEX_POINT('',#203009); +#203009 = CARTESIAN_POINT('',(128.996025,-77.646585,1.585)); +#203010 = LINE('',#203011,#203012); +#203011 = CARTESIAN_POINT('',(128.993109,-77.6282,1.585)); +#203012 = VECTOR('',#203013,1.); +#203013 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#203014 = ORIENTED_EDGE('',*,*,#203015,.T.); +#203015 = EDGE_CURVE('',#203008,#203016,#203018,.T.); +#203016 = VERTEX_POINT('',#203017); +#203017 = CARTESIAN_POINT('',(129.322322,-77.418178,1.585)); +#203018 = LINE('',#203019,#203020); +#203019 = CARTESIAN_POINT('',(128.996025,-77.646585,1.585)); +#203020 = VECTOR('',#203021,1.); +#203021 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#203022 = ORIENTED_EDGE('',*,*,#203023,.T.); +#203023 = EDGE_CURVE('',#203016,#203024,#203026,.T.); +#203024 = VERTEX_POINT('',#203025); +#203025 = CARTESIAN_POINT('',(129.396872,-77.524678,1.585)); +#203026 = CIRCLE('',#203027,6.499990865383E-02); +#203027 = AXIS2_PLACEMENT_3D('',#203028,#203029,#203030); +#203028 = CARTESIAN_POINT('',(129.35959707222,-77.47142794944,1.585)); +#203029 = DIRECTION('',(0.,0.,-1.)); +#203030 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#203031 = ORIENTED_EDGE('',*,*,#203032,.T.); +#203032 = EDGE_CURVE('',#203024,#203033,#203035,.T.); +#203033 = VERTEX_POINT('',#203034); +#203034 = CARTESIAN_POINT('',(128.996025,-77.80527,1.585)); +#203035 = LINE('',#203036,#203037); +#203036 = CARTESIAN_POINT('',(129.396872,-77.524678,1.585)); +#203037 = VECTOR('',#203038,1.); +#203038 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#203039 = ORIENTED_EDGE('',*,*,#203040,.T.); +#203040 = EDGE_CURVE('',#203033,#203041,#203043,.T.); +#203041 = VERTEX_POINT('',#203042); +#203042 = CARTESIAN_POINT('',(128.996025,-77.920714,1.585)); +#203043 = LINE('',#203044,#203045); +#203044 = CARTESIAN_POINT('',(128.996025,-77.80527,1.585)); +#203045 = VECTOR('',#203046,1.); +#203046 = DIRECTION('',(0.,-1.,0.)); +#203047 = ORIENTED_EDGE('',*,*,#203048,.T.); +#203048 = EDGE_CURVE('',#203041,#203049,#203051,.T.); +#203049 = VERTEX_POINT('',#203050); +#203050 = CARTESIAN_POINT('',(129.359597,-77.920714,1.585)); +#203051 = LINE('',#203052,#203053); +#203052 = CARTESIAN_POINT('',(128.996025,-77.920714,1.585)); +#203053 = VECTOR('',#203054,1.); +#203054 = DIRECTION('',(1.,0.,0.)); +#203055 = ORIENTED_EDGE('',*,*,#203056,.T.); +#203056 = EDGE_CURVE('',#203049,#203057,#203059,.T.); +#203057 = VERTEX_POINT('',#203058); +#203058 = CARTESIAN_POINT('',(129.359597,-78.050714,1.585)); +#203059 = CIRCLE('',#203060,6.500000000091E-02); +#203060 = AXIS2_PLACEMENT_3D('',#203061,#203062,#203063); +#203061 = CARTESIAN_POINT('',(129.35959665513,-77.985714,1.585)); +#203062 = DIRECTION('',(0.,0.,-1.)); +#203063 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#203064 = ORIENTED_EDGE('',*,*,#203065,.T.); +#203065 = EDGE_CURVE('',#203057,#203066,#203068,.T.); +#203066 = VERTEX_POINT('',#203067); +#203067 = CARTESIAN_POINT('',(128.459597,-78.050714,1.585)); +#203068 = LINE('',#203069,#203070); +#203069 = CARTESIAN_POINT('',(129.359597,-78.050714,1.585)); +#203070 = VECTOR('',#203071,1.); +#203071 = DIRECTION('',(-1.,0.,0.)); +#203072 = ORIENTED_EDGE('',*,*,#203073,.T.); +#203073 = EDGE_CURVE('',#203066,#203074,#203076,.T.); +#203074 = VERTEX_POINT('',#203075); +#203075 = CARTESIAN_POINT('',(128.394597,-77.985714,1.585)); +#203076 = CIRCLE('',#203077,6.500103935387E-02); +#203077 = AXIS2_PLACEMENT_3D('',#203078,#203079,#203080); +#203078 = CARTESIAN_POINT('',(128.45959803934,-77.98571296065,1.585)); +#203079 = DIRECTION('',(0.,0.,-1.)); +#203080 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#203081 = ORIENTED_EDGE('',*,*,#203082,.T.); +#203082 = EDGE_CURVE('',#203074,#203083,#203085,.T.); +#203083 = VERTEX_POINT('',#203084); +#203084 = CARTESIAN_POINT('',(128.397512,-77.6282,1.585)); +#203085 = LINE('',#203086,#203087); +#203086 = CARTESIAN_POINT('',(128.394597,-77.985714,1.585)); +#203087 = VECTOR('',#203088,1.); +#203088 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#203089 = ORIENTED_EDGE('',*,*,#203090,.T.); +#203090 = EDGE_CURVE('',#203083,#203091,#203093,.T.); +#203091 = VERTEX_POINT('',#203092); +#203092 = CARTESIAN_POINT('',(128.450702,-77.519844,1.585)); +#203093 = LINE('',#203094,#203095); +#203094 = CARTESIAN_POINT('',(128.397512,-77.6282,1.585)); +#203095 = VECTOR('',#203096,1.); +#203096 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#203097 = ORIENTED_EDGE('',*,*,#203098,.T.); +#203098 = EDGE_CURVE('',#203091,#202973,#203099,.T.); +#203099 = LINE('',#203100,#203101); +#203100 = CARTESIAN_POINT('',(128.450702,-77.519844,1.585)); +#203101 = VECTOR('',#203102,1.); +#203102 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#203103 = FACE_BOUND('',#203104,.F.); +#203104 = EDGE_LOOP('',(#203105,#203116,#203124,#203132,#203140,#203148, + #203156)); +#203105 = ORIENTED_EDGE('',*,*,#203106,.T.); +#203106 = EDGE_CURVE('',#203107,#203109,#203111,.T.); +#203107 = VERTEX_POINT('',#203108); +#203108 = CARTESIAN_POINT('',(128.806808,-77.567706,1.585)); +#203109 = VERTEX_POINT('',#203110); +#203110 = CARTESIAN_POINT('',(128.555875,-77.595644,1.585)); +#203111 = CIRCLE('',#203112,0.180979134862); +#203112 = AXIS2_PLACEMENT_3D('',#203113,#203114,#203115); +#203113 = CARTESIAN_POINT('',(128.69569076987,-77.71055700078,1.585)); +#203114 = DIRECTION('',(0.,0.,1.)); +#203115 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#203116 = ORIENTED_EDGE('',*,*,#203117,.T.); +#203117 = EDGE_CURVE('',#203109,#203118,#203120,.T.); +#203118 = VERTEX_POINT('',#203119); +#203119 = CARTESIAN_POINT('',(128.524597,-77.658201,1.585)); +#203120 = LINE('',#203121,#203122); +#203121 = CARTESIAN_POINT('',(128.555875,-77.595644,1.585)); +#203122 = VECTOR('',#203123,1.); +#203123 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#203124 = ORIENTED_EDGE('',*,*,#203125,.T.); +#203125 = EDGE_CURVE('',#203118,#203126,#203128,.T.); +#203126 = VERTEX_POINT('',#203127); +#203127 = CARTESIAN_POINT('',(128.524597,-77.920714,1.585)); +#203128 = LINE('',#203129,#203130); +#203129 = CARTESIAN_POINT('',(128.524597,-77.658201,1.585)); +#203130 = VECTOR('',#203131,1.); +#203131 = DIRECTION('',(0.,-1.,0.)); +#203132 = ORIENTED_EDGE('',*,*,#203133,.T.); +#203133 = EDGE_CURVE('',#203126,#203134,#203136,.T.); +#203134 = VERTEX_POINT('',#203135); +#203135 = CARTESIAN_POINT('',(128.866025,-77.920714,1.585)); +#203136 = LINE('',#203137,#203138); +#203137 = CARTESIAN_POINT('',(128.524597,-77.920714,1.585)); +#203138 = VECTOR('',#203139,1.); +#203139 = DIRECTION('',(1.,0.,0.)); +#203140 = ORIENTED_EDGE('',*,*,#203141,.T.); +#203141 = EDGE_CURVE('',#203134,#203142,#203144,.T.); +#203142 = VERTEX_POINT('',#203143); +#203143 = CARTESIAN_POINT('',(128.866025,-77.658201,1.585)); +#203144 = LINE('',#203145,#203146); +#203145 = CARTESIAN_POINT('',(128.866025,-77.920714,1.585)); +#203146 = VECTOR('',#203147,1.); +#203147 = DIRECTION('',(0.,1.,0.)); +#203148 = ORIENTED_EDGE('',*,*,#203149,.T.); +#203149 = EDGE_CURVE('',#203142,#203150,#203152,.T.); +#203150 = VERTEX_POINT('',#203151); +#203151 = CARTESIAN_POINT('',(128.834746,-77.595644,1.585)); +#203152 = LINE('',#203153,#203154); +#203153 = CARTESIAN_POINT('',(128.866025,-77.658201,1.585)); +#203154 = VECTOR('',#203155,1.); +#203155 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#203156 = ORIENTED_EDGE('',*,*,#203157,.T.); +#203157 = EDGE_CURVE('',#203150,#203107,#203158,.T.); +#203158 = LINE('',#203159,#203160); +#203159 = CARTESIAN_POINT('',(128.834746,-77.595644,1.585)); +#203160 = VECTOR('',#203161,1.); +#203161 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#203162 = PLANE('',#203163); +#203163 = AXIS2_PLACEMENT_3D('',#203164,#203165,#203166); +#203164 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203165 = DIRECTION('',(0.,0.,1.)); +#203166 = DIRECTION('',(1.,0.,-0.)); +#203167 = SHELL_BASED_SURFACE_MODEL('',(#203168)); +#203168 = OPEN_SHELL('',(#203169)); +#203169 = ADVANCED_FACE('',(#203170),#203442,.T.); +#203170 = FACE_BOUND('',#203171,.F.); +#203171 = EDGE_LOOP('',(#203172,#203183,#203191,#203199,#203208,#203216, + #203224,#203232,#203240,#203248,#203256,#203264,#203273,#203281, + #203289,#203297,#203305,#203313,#203322,#203330,#203338,#203347, + #203355,#203363,#203371,#203379,#203387,#203395,#203403,#203412, + #203420,#203428,#203436)); +#203172 = ORIENTED_EDGE('',*,*,#203173,.T.); +#203173 = EDGE_CURVE('',#203174,#203176,#203178,.T.); +#203174 = VERTEX_POINT('',#203175); +#203175 = CARTESIAN_POINT('',(132.09079,-77.450873,1.585)); +#203176 = VERTEX_POINT('',#203177); +#203177 = CARTESIAN_POINT('',(132.214119,-77.491982,1.585)); +#203178 = CIRCLE('',#203179,6.499998485139E-02); +#203179 = AXIS2_PLACEMENT_3D('',#203180,#203181,#203182); +#203180 = CARTESIAN_POINT('',(132.15245436584,-77.47142790248,1.585)); +#203181 = DIRECTION('',(0.,0.,-1.)); +#203182 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#203183 = ORIENTED_EDGE('',*,*,#203184,.T.); +#203184 = EDGE_CURVE('',#203176,#203185,#203187,.T.); +#203185 = VERTEX_POINT('',#203186); +#203186 = CARTESIAN_POINT('',(132.174597,-77.610547,1.585)); +#203187 = LINE('',#203188,#203189); +#203188 = CARTESIAN_POINT('',(132.214119,-77.491982,1.585)); +#203189 = VECTOR('',#203190,1.); +#203190 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#203191 = ORIENTED_EDGE('',*,*,#203192,.T.); +#203192 = EDGE_CURVE('',#203185,#203193,#203195,.T.); +#203193 = VERTEX_POINT('',#203194); +#203194 = CARTESIAN_POINT('',(132.174597,-77.79894,1.585)); +#203195 = LINE('',#203196,#203197); +#203196 = CARTESIAN_POINT('',(132.174597,-77.610547,1.585)); +#203197 = VECTOR('',#203198,1.); +#203198 = DIRECTION('',(0.,-1.,0.)); +#203199 = ORIENTED_EDGE('',*,*,#203200,.T.); +#203200 = EDGE_CURVE('',#203193,#203201,#203203,.T.); +#203201 = VERTEX_POINT('',#203202); +#203202 = CARTESIAN_POINT('',(132.29637,-77.920714,1.585)); +#203203 = CIRCLE('',#203204,0.170995888391); +#203204 = AXIS2_PLACEMENT_3D('',#203205,#203206,#203207); +#203205 = CARTESIAN_POINT('',(132.3399473225,-77.75536403534,1.585)); +#203206 = DIRECTION('',(0.,0.,1.)); +#203207 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#203208 = ORIENTED_EDGE('',*,*,#203209,.T.); +#203209 = EDGE_CURVE('',#203201,#203210,#203212,.T.); +#203210 = VERTEX_POINT('',#203211); +#203211 = CARTESIAN_POINT('',(132.351395,-77.920714,1.585)); +#203212 = LINE('',#203213,#203214); +#203213 = CARTESIAN_POINT('',(132.29637,-77.920714,1.585)); +#203214 = VECTOR('',#203215,1.); +#203215 = DIRECTION('',(1.,0.,0.)); +#203216 = ORIENTED_EDGE('',*,*,#203217,.T.); +#203217 = EDGE_CURVE('',#203210,#203218,#203220,.T.); +#203218 = VERTEX_POINT('',#203219); +#203219 = CARTESIAN_POINT('',(132.413951,-77.889436,1.585)); +#203220 = LINE('',#203221,#203222); +#203221 = CARTESIAN_POINT('',(132.351395,-77.920714,1.585)); +#203222 = VECTOR('',#203223,1.); +#203223 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#203224 = ORIENTED_EDGE('',*,*,#203225,.T.); +#203225 = EDGE_CURVE('',#203218,#203226,#203228,.T.); +#203226 = VERTEX_POINT('',#203227); +#203227 = CARTESIAN_POINT('',(132.441889,-77.861497,1.585)); +#203228 = LINE('',#203229,#203230); +#203229 = CARTESIAN_POINT('',(132.413951,-77.889436,1.585)); +#203230 = VECTOR('',#203231,1.); +#203231 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#203232 = ORIENTED_EDGE('',*,*,#203233,.T.); +#203233 = EDGE_CURVE('',#203226,#203234,#203236,.T.); +#203234 = VERTEX_POINT('',#203235); +#203235 = CARTESIAN_POINT('',(132.476839,-77.791596,1.585)); +#203236 = LINE('',#203237,#203238); +#203237 = CARTESIAN_POINT('',(132.441889,-77.861497,1.585)); +#203238 = VECTOR('',#203239,1.); +#203239 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#203240 = ORIENTED_EDGE('',*,*,#203241,.T.); +#203241 = EDGE_CURVE('',#203234,#203242,#203244,.T.); +#203242 = VERTEX_POINT('',#203243); +#203243 = CARTESIAN_POINT('',(132.522887,-77.613788,1.585)); +#203244 = LINE('',#203245,#203246); +#203245 = CARTESIAN_POINT('',(132.476839,-77.791596,1.585)); +#203246 = VECTOR('',#203247,1.); +#203247 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#203248 = ORIENTED_EDGE('',*,*,#203249,.T.); +#203249 = EDGE_CURVE('',#203242,#203250,#203252,.T.); +#203250 = VERTEX_POINT('',#203251); +#203251 = CARTESIAN_POINT('',(132.57792,-77.511181,1.585)); +#203252 = LINE('',#203253,#203254); +#203253 = CARTESIAN_POINT('',(132.522887,-77.613788,1.585)); +#203254 = VECTOR('',#203255,1.); +#203255 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#203256 = ORIENTED_EDGE('',*,*,#203257,.T.); +#203257 = EDGE_CURVE('',#203250,#203258,#203260,.T.); +#203258 = VERTEX_POINT('',#203259); +#203259 = CARTESIAN_POINT('',(132.637671,-77.456147,1.585)); +#203260 = LINE('',#203261,#203262); +#203261 = CARTESIAN_POINT('',(132.57792,-77.511181,1.585)); +#203262 = VECTOR('',#203263,1.); +#203263 = DIRECTION('',(0.735543975152,0.677476981615,0.)); +#203264 = ORIENTED_EDGE('',*,*,#203265,.T.); +#203265 = EDGE_CURVE('',#203258,#203266,#203268,.T.); +#203266 = VERTEX_POINT('',#203267); +#203267 = CARTESIAN_POINT('',(132.867237,-77.41329,1.585)); +#203268 = CIRCLE('',#203269,0.258971949836); +#203269 = AXIS2_PLACEMENT_3D('',#203270,#203271,#203272); +#203270 = CARTESIAN_POINT('',(132.79487456064,-77.66194668736,1.585)); +#203271 = DIRECTION('',(0.,0.,-1.)); +#203272 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#203273 = ORIENTED_EDGE('',*,*,#203274,.T.); +#203274 = EDGE_CURVE('',#203266,#203275,#203277,.T.); +#203275 = VERTEX_POINT('',#203276); +#203276 = CARTESIAN_POINT('',(132.969844,-77.468323,1.585)); +#203277 = LINE('',#203278,#203279); +#203278 = CARTESIAN_POINT('',(132.867237,-77.41329,1.585)); +#203279 = VECTOR('',#203280,1.); +#203280 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#203281 = ORIENTED_EDGE('',*,*,#203282,.T.); +#203282 = EDGE_CURVE('',#203275,#203283,#203285,.T.); +#203283 = VERTEX_POINT('',#203284); +#203284 = CARTESIAN_POINT('',(133.024878,-77.528074,1.585)); +#203285 = LINE('',#203286,#203287); +#203286 = CARTESIAN_POINT('',(132.969844,-77.468323,1.585)); +#203287 = VECTOR('',#203288,1.); +#203288 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#203289 = ORIENTED_EDGE('',*,*,#203290,.T.); +#203290 = EDGE_CURVE('',#203283,#203291,#203293,.T.); +#203291 = VERTEX_POINT('',#203292); +#203292 = CARTESIAN_POINT('',(133.071681,-77.6282,1.585)); +#203293 = LINE('',#203294,#203295); +#203294 = CARTESIAN_POINT('',(133.024878,-77.528074,1.585)); +#203295 = VECTOR('',#203296,1.); +#203296 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#203297 = ORIENTED_EDGE('',*,*,#203298,.T.); +#203298 = EDGE_CURVE('',#203291,#203299,#203301,.T.); +#203299 = VERTEX_POINT('',#203300); +#203300 = CARTESIAN_POINT('',(133.072563,-77.867365,1.585)); +#203301 = LINE('',#203302,#203303); +#203302 = CARTESIAN_POINT('',(133.071681,-77.6282,1.585)); +#203303 = VECTOR('',#203304,1.); +#203304 = DIRECTION('',(3.687805500009E-03,-0.999993200022,0.)); +#203305 = ORIENTED_EDGE('',*,*,#203306,.T.); +#203306 = EDGE_CURVE('',#203299,#203307,#203309,.T.); +#203307 = VERTEX_POINT('',#203308); +#203308 = CARTESIAN_POINT('',(133.028404,-78.006269,1.585)); +#203309 = LINE('',#203310,#203311); +#203310 = CARTESIAN_POINT('',(133.072563,-77.867365,1.585)); +#203311 = VECTOR('',#203312,1.); +#203312 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#203313 = ORIENTED_EDGE('',*,*,#203314,.T.); +#203314 = EDGE_CURVE('',#203307,#203315,#203317,.T.); +#203315 = VERTEX_POINT('',#203316); +#203316 = CARTESIAN_POINT('',(132.905076,-77.965159,1.585)); +#203317 = CIRCLE('',#203318,6.499966862257E-02); +#203318 = AXIS2_PLACEMENT_3D('',#203319,#203320,#203321); +#203319 = CARTESIAN_POINT('',(132.96674006734,-77.98571379797,1.585)); +#203320 = DIRECTION('',(-0.,0.,-1.)); +#203321 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#203322 = ORIENTED_EDGE('',*,*,#203323,.T.); +#203323 = EDGE_CURVE('',#203315,#203324,#203326,.T.); +#203324 = VERTEX_POINT('',#203325); +#203325 = CARTESIAN_POINT('',(132.944597,-77.846596,1.585)); +#203326 = LINE('',#203327,#203328); +#203327 = CARTESIAN_POINT('',(132.905076,-77.965159,1.585)); +#203328 = VECTOR('',#203329,1.); +#203329 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#203330 = ORIENTED_EDGE('',*,*,#203331,.T.); +#203331 = EDGE_CURVE('',#203324,#203332,#203334,.T.); +#203332 = VERTEX_POINT('',#203333); +#203333 = CARTESIAN_POINT('',(132.944597,-77.658202,1.585)); +#203334 = LINE('',#203335,#203336); +#203335 = CARTESIAN_POINT('',(132.944597,-77.846596,1.585)); +#203336 = VECTOR('',#203337,1.); +#203337 = DIRECTION('',(0.,1.,0.)); +#203338 = ORIENTED_EDGE('',*,*,#203339,.T.); +#203339 = EDGE_CURVE('',#203332,#203340,#203342,.T.); +#203340 = VERTEX_POINT('',#203341); +#203341 = CARTESIAN_POINT('',(132.822823,-77.536428,1.585)); +#203342 = CIRCLE('',#203343,0.170999251022); +#203343 = AXIS2_PLACEMENT_3D('',#203344,#203345,#203346); +#203344 = CARTESIAN_POINT('',(132.779244,-77.701781,1.585)); +#203345 = DIRECTION('',(0.,0.,1.)); +#203346 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#203347 = ORIENTED_EDGE('',*,*,#203348,.T.); +#203348 = EDGE_CURVE('',#203340,#203349,#203351,.T.); +#203349 = VERTEX_POINT('',#203350); +#203350 = CARTESIAN_POINT('',(132.767799,-77.536428,1.585)); +#203351 = LINE('',#203352,#203353); +#203352 = CARTESIAN_POINT('',(132.822823,-77.536428,1.585)); +#203353 = VECTOR('',#203354,1.); +#203354 = DIRECTION('',(-1.,0.,0.)); +#203355 = ORIENTED_EDGE('',*,*,#203356,.T.); +#203356 = EDGE_CURVE('',#203349,#203357,#203359,.T.); +#203357 = VERTEX_POINT('',#203358); +#203358 = CARTESIAN_POINT('',(132.705243,-77.567706,1.585)); +#203359 = LINE('',#203360,#203361); +#203360 = CARTESIAN_POINT('',(132.767799,-77.536428,1.585)); +#203361 = VECTOR('',#203362,1.); +#203362 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#203363 = ORIENTED_EDGE('',*,*,#203364,.T.); +#203364 = EDGE_CURVE('',#203357,#203365,#203367,.T.); +#203365 = VERTEX_POINT('',#203366); +#203366 = CARTESIAN_POINT('',(132.677303,-77.595646,1.585)); +#203367 = LINE('',#203368,#203369); +#203368 = CARTESIAN_POINT('',(132.705243,-77.567706,1.585)); +#203369 = VECTOR('',#203370,1.); +#203370 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203371 = ORIENTED_EDGE('',*,*,#203372,.T.); +#203372 = EDGE_CURVE('',#203365,#203373,#203375,.T.); +#203373 = VERTEX_POINT('',#203374); +#203374 = CARTESIAN_POINT('',(132.642353,-77.665546,1.585)); +#203375 = LINE('',#203376,#203377); +#203376 = CARTESIAN_POINT('',(132.677303,-77.595646,1.585)); +#203377 = VECTOR('',#203378,1.); +#203378 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#203379 = ORIENTED_EDGE('',*,*,#203380,.T.); +#203380 = EDGE_CURVE('',#203373,#203381,#203383,.T.); +#203381 = VERTEX_POINT('',#203382); +#203382 = CARTESIAN_POINT('',(132.596306,-77.843354,1.585)); +#203383 = LINE('',#203384,#203385); +#203384 = CARTESIAN_POINT('',(132.642353,-77.665546,1.585)); +#203385 = VECTOR('',#203386,1.); +#203386 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#203387 = ORIENTED_EDGE('',*,*,#203388,.T.); +#203388 = EDGE_CURVE('',#203381,#203389,#203391,.T.); +#203389 = VERTEX_POINT('',#203390); +#203390 = CARTESIAN_POINT('',(132.541273,-77.945962,1.585)); +#203391 = LINE('',#203392,#203393); +#203392 = CARTESIAN_POINT('',(132.596306,-77.843354,1.585)); +#203393 = VECTOR('',#203394,1.); +#203394 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#203395 = ORIENTED_EDGE('',*,*,#203396,.T.); +#203396 = EDGE_CURVE('',#203389,#203397,#203399,.T.); +#203397 = VERTEX_POINT('',#203398); +#203398 = CARTESIAN_POINT('',(132.481523,-78.000995,1.585)); +#203399 = LINE('',#203400,#203401); +#203400 = CARTESIAN_POINT('',(132.541273,-77.945962,1.585)); +#203401 = VECTOR('',#203402,1.); +#203402 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#203403 = ORIENTED_EDGE('',*,*,#203404,.T.); +#203404 = EDGE_CURVE('',#203397,#203405,#203407,.T.); +#203405 = VERTEX_POINT('',#203406); +#203406 = CARTESIAN_POINT('',(132.158013,-77.994608,1.585)); +#203407 = CIRCLE('',#203408,0.260197694649); +#203408 = AXIS2_PLACEMENT_3D('',#203409,#203410,#203411); +#203409 = CARTESIAN_POINT('',(132.32379048924,-77.79405709783,1.585)); +#203410 = DIRECTION('',(-0.,0.,-1.)); +#203411 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#203412 = ORIENTED_EDGE('',*,*,#203413,.T.); +#203413 = EDGE_CURVE('',#203405,#203414,#203416,.T.); +#203414 = VERTEX_POINT('',#203415); +#203415 = CARTESIAN_POINT('',(132.100702,-77.937297,1.585)); +#203416 = LINE('',#203417,#203418); +#203417 = CARTESIAN_POINT('',(132.158013,-77.994608,1.585)); +#203418 = VECTOR('',#203419,1.); +#203419 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#203420 = ORIENTED_EDGE('',*,*,#203421,.T.); +#203421 = EDGE_CURVE('',#203414,#203422,#203424,.T.); +#203422 = VERTEX_POINT('',#203423); +#203423 = CARTESIAN_POINT('',(132.047512,-77.828941,1.585)); +#203424 = LINE('',#203425,#203426); +#203425 = CARTESIAN_POINT('',(132.100702,-77.937297,1.585)); +#203426 = VECTOR('',#203427,1.); +#203427 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#203428 = ORIENTED_EDGE('',*,*,#203429,.T.); +#203429 = EDGE_CURVE('',#203422,#203430,#203432,.T.); +#203430 = VERTEX_POINT('',#203431); +#203431 = CARTESIAN_POINT('',(132.04663,-77.589777,1.585)); +#203432 = LINE('',#203433,#203434); +#203433 = CARTESIAN_POINT('',(132.047512,-77.828941,1.585)); +#203434 = VECTOR('',#203435,1.); +#203435 = DIRECTION('',(-3.687820919486E-03,0.999993199965,0.)); +#203436 = ORIENTED_EDGE('',*,*,#203437,.T.); +#203437 = EDGE_CURVE('',#203430,#203174,#203438,.T.); +#203438 = LINE('',#203439,#203440); +#203439 = CARTESIAN_POINT('',(132.04663,-77.589777,1.585)); +#203440 = VECTOR('',#203441,1.); +#203441 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#203442 = PLANE('',#203443); +#203443 = AXIS2_PLACEMENT_3D('',#203444,#203445,#203446); +#203444 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203445 = DIRECTION('',(0.,0.,1.)); +#203446 = DIRECTION('',(1.,0.,-0.)); +#203447 = SHELL_BASED_SURFACE_MODEL('',(#203448)); +#203448 = OPEN_SHELL('',(#203449)); +#203449 = ADVANCED_FACE('',(#203450,#203576,#203643),#203710,.T.); +#203450 = FACE_BOUND('',#203451,.F.); +#203451 = EDGE_LOOP('',(#203452,#203463,#203471,#203479,#203487,#203495, + #203504,#203512,#203521,#203529,#203538,#203546,#203554,#203562, + #203570)); +#203452 = ORIENTED_EDGE('',*,*,#203453,.T.); +#203453 = EDGE_CURVE('',#203454,#203456,#203458,.T.); +#203454 = VERTEX_POINT('',#203455); +#203455 = CARTESIAN_POINT('',(137.664813,-77.441861,1.585)); +#203456 = VERTEX_POINT('',#203457); +#203457 = CARTESIAN_POINT('',(137.937237,-77.399004,1.585)); +#203458 = CIRCLE('',#203459,0.328851911789); +#203459 = AXIS2_PLACEMENT_3D('',#203460,#203461,#203462); +#203460 = CARTESIAN_POINT('',(137.84742108589,-77.71535298681,1.585)); +#203461 = DIRECTION('',(0.,0.,-1.)); +#203462 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#203463 = ORIENTED_EDGE('',*,*,#203464,.T.); +#203464 = EDGE_CURVE('',#203456,#203465,#203467,.T.); +#203465 = VERTEX_POINT('',#203466); +#203466 = CARTESIAN_POINT('',(138.039843,-77.454037,1.585)); +#203467 = LINE('',#203468,#203469); +#203468 = CARTESIAN_POINT('',(137.937237,-77.399004,1.585)); +#203469 = VECTOR('',#203470,1.); +#203470 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#203471 = ORIENTED_EDGE('',*,*,#203472,.T.); +#203472 = EDGE_CURVE('',#203465,#203473,#203475,.T.); +#203473 = VERTEX_POINT('',#203474); +#203474 = CARTESIAN_POINT('',(138.094878,-77.513787,1.585)); +#203475 = LINE('',#203476,#203477); +#203476 = CARTESIAN_POINT('',(138.039843,-77.454037,1.585)); +#203477 = VECTOR('',#203478,1.); +#203478 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#203479 = ORIENTED_EDGE('',*,*,#203480,.T.); +#203480 = EDGE_CURVE('',#203473,#203481,#203483,.T.); +#203481 = VERTEX_POINT('',#203482); +#203482 = CARTESIAN_POINT('',(138.141681,-77.613914,1.585)); +#203483 = LINE('',#203484,#203485); +#203484 = CARTESIAN_POINT('',(138.094878,-77.513787,1.585)); +#203485 = VECTOR('',#203486,1.); +#203486 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#203487 = ORIENTED_EDGE('',*,*,#203488,.T.); +#203488 = EDGE_CURVE('',#203481,#203489,#203491,.T.); +#203489 = VERTEX_POINT('',#203490); +#203490 = CARTESIAN_POINT('',(138.144597,-77.971428,1.585)); +#203491 = LINE('',#203492,#203493); +#203492 = CARTESIAN_POINT('',(138.141681,-77.613914,1.585)); +#203493 = VECTOR('',#203494,1.); +#203494 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#203495 = ORIENTED_EDGE('',*,*,#203496,.T.); +#203496 = EDGE_CURVE('',#203489,#203497,#203499,.T.); +#203497 = VERTEX_POINT('',#203498); +#203498 = CARTESIAN_POINT('',(138.079597,-78.036428,1.585)); +#203499 = CIRCLE('',#203500,6.500103935393E-02); +#203500 = AXIS2_PLACEMENT_3D('',#203501,#203502,#203503); +#203501 = CARTESIAN_POINT('',(138.07959596065,-77.97142696065,1.585)); +#203502 = DIRECTION('',(0.,0.,-1.)); +#203503 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#203504 = ORIENTED_EDGE('',*,*,#203505,.T.); +#203505 = EDGE_CURVE('',#203497,#203506,#203508,.T.); +#203506 = VERTEX_POINT('',#203507); +#203507 = CARTESIAN_POINT('',(137.179597,-78.036428,1.585)); +#203508 = LINE('',#203509,#203510); +#203509 = CARTESIAN_POINT('',(138.079597,-78.036428,1.585)); +#203510 = VECTOR('',#203511,1.); +#203511 = DIRECTION('',(-1.,0.,0.)); +#203512 = ORIENTED_EDGE('',*,*,#203513,.T.); +#203513 = EDGE_CURVE('',#203506,#203514,#203516,.T.); +#203514 = VERTEX_POINT('',#203515); +#203515 = CARTESIAN_POINT('',(137.114597,-77.971428,1.585)); +#203516 = CIRCLE('',#203517,6.500103935387E-02); +#203517 = AXIS2_PLACEMENT_3D('',#203518,#203519,#203520); +#203518 = CARTESIAN_POINT('',(137.17959803934,-77.97142696065,1.585)); +#203519 = DIRECTION('',(0.,0.,-1.)); +#203520 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#203521 = ORIENTED_EDGE('',*,*,#203522,.T.); +#203522 = EDGE_CURVE('',#203514,#203523,#203525,.T.); +#203523 = VERTEX_POINT('',#203524); +#203524 = CARTESIAN_POINT('',(137.117512,-77.656771,1.585)); +#203525 = LINE('',#203526,#203527); +#203526 = CARTESIAN_POINT('',(137.114597,-77.971428,1.585)); +#203527 = VECTOR('',#203528,1.); +#203528 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#203529 = ORIENTED_EDGE('',*,*,#203530,.T.); +#203530 = EDGE_CURVE('',#203523,#203531,#203533,.T.); +#203531 = VERTEX_POINT('',#203532); +#203532 = CARTESIAN_POINT('',(137.336368,-77.437914,1.585)); +#203533 = CIRCLE('',#203534,0.308109459502); +#203534 = AXIS2_PLACEMENT_3D('',#203535,#203536,#203537); +#203535 = CARTESIAN_POINT('',(137.41533145359,-77.73573309279,1.585)); +#203536 = DIRECTION('',(0.,0.,-1.)); +#203537 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#203538 = ORIENTED_EDGE('',*,*,#203539,.T.); +#203539 = EDGE_CURVE('',#203531,#203540,#203542,.T.); +#203540 = VERTEX_POINT('',#203541); +#203541 = CARTESIAN_POINT('',(137.451396,-77.437914,1.585)); +#203542 = LINE('',#203543,#203544); +#203543 = CARTESIAN_POINT('',(137.336368,-77.437914,1.585)); +#203544 = VECTOR('',#203545,1.); +#203545 = DIRECTION('',(1.,0.,0.)); +#203546 = ORIENTED_EDGE('',*,*,#203547,.T.); +#203547 = EDGE_CURVE('',#203540,#203548,#203550,.T.); +#203548 = VERTEX_POINT('',#203549); +#203549 = CARTESIAN_POINT('',(137.559761,-77.491111,1.585)); +#203550 = LINE('',#203551,#203552); +#203551 = CARTESIAN_POINT('',(137.451396,-77.437914,1.585)); +#203552 = VECTOR('',#203553,1.); +#203553 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#203554 = ORIENTED_EDGE('',*,*,#203555,.T.); +#203555 = EDGE_CURVE('',#203548,#203556,#203558,.T.); +#203556 = VERTEX_POINT('',#203557); +#203557 = CARTESIAN_POINT('',(137.590973,-77.517981,1.585)); +#203558 = LINE('',#203559,#203560); +#203559 = CARTESIAN_POINT('',(137.559761,-77.491111,1.585)); +#203560 = VECTOR('',#203561,1.); +#203561 = DIRECTION('',(0.7578528376,-0.652425533331,0.)); +#203562 = ORIENTED_EDGE('',*,*,#203563,.T.); +#203563 = EDGE_CURVE('',#203556,#203564,#203566,.T.); +#203564 = VERTEX_POINT('',#203565); +#203565 = CARTESIAN_POINT('',(137.605063,-77.496894,1.585)); +#203566 = LINE('',#203567,#203568); +#203567 = CARTESIAN_POINT('',(137.590973,-77.517981,1.585)); +#203568 = VECTOR('',#203569,1.); +#203569 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#203570 = ORIENTED_EDGE('',*,*,#203571,.T.); +#203571 = EDGE_CURVE('',#203564,#203454,#203572,.T.); +#203572 = LINE('',#203573,#203574); +#203573 = CARTESIAN_POINT('',(137.605063,-77.496894,1.585)); +#203574 = VECTOR('',#203575,1.); +#203575 = DIRECTION('',(0.73554445943,0.677476455829,0.)); +#203576 = FACE_BOUND('',#203577,.F.); +#203577 = EDGE_LOOP('',(#203578,#203589,#203597,#203605,#203613,#203621, + #203629,#203637)); +#203578 = ORIENTED_EDGE('',*,*,#203579,.T.); +#203579 = EDGE_CURVE('',#203580,#203582,#203584,.T.); +#203580 = VERTEX_POINT('',#203581); +#203581 = CARTESIAN_POINT('',(137.483952,-77.596277,1.585)); +#203582 = VERTEX_POINT('',#203583); +#203583 = CARTESIAN_POINT('',(137.303814,-77.596277,1.585)); +#203584 = CIRCLE('',#203585,0.136032349131); +#203585 = AXIS2_PLACEMENT_3D('',#203586,#203587,#203588); +#203586 = CARTESIAN_POINT('',(137.393883,-77.69822,1.585)); +#203587 = DIRECTION('',(0.,0.,1.)); +#203588 = DIRECTION('',(0.662114567422,0.749402628504,-0.)); +#203589 = ORIENTED_EDGE('',*,*,#203590,.T.); +#203590 = EDGE_CURVE('',#203582,#203591,#203593,.T.); +#203591 = VERTEX_POINT('',#203592); +#203592 = CARTESIAN_POINT('',(137.275876,-77.624215,1.585)); +#203593 = LINE('',#203594,#203595); +#203594 = CARTESIAN_POINT('',(137.303814,-77.596277,1.585)); +#203595 = VECTOR('',#203596,1.); +#203596 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#203597 = ORIENTED_EDGE('',*,*,#203598,.T.); +#203598 = EDGE_CURVE('',#203591,#203599,#203601,.T.); +#203599 = VERTEX_POINT('',#203600); +#203600 = CARTESIAN_POINT('',(137.244597,-77.686773,1.585)); +#203601 = LINE('',#203602,#203603); +#203602 = CARTESIAN_POINT('',(137.275876,-77.624215,1.585)); +#203603 = VECTOR('',#203604,1.); +#203604 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#203605 = ORIENTED_EDGE('',*,*,#203606,.T.); +#203606 = EDGE_CURVE('',#203599,#203607,#203609,.T.); +#203607 = VERTEX_POINT('',#203608); +#203608 = CARTESIAN_POINT('',(137.244597,-77.906428,1.585)); +#203609 = LINE('',#203610,#203611); +#203610 = CARTESIAN_POINT('',(137.244597,-77.686773,1.585)); +#203611 = VECTOR('',#203612,1.); +#203612 = DIRECTION('',(0.,-1.,0.)); +#203613 = ORIENTED_EDGE('',*,*,#203614,.T.); +#203614 = EDGE_CURVE('',#203607,#203615,#203617,.T.); +#203615 = VERTEX_POINT('',#203616); +#203616 = CARTESIAN_POINT('',(137.543168,-77.906428,1.585)); +#203617 = LINE('',#203618,#203619); +#203618 = CARTESIAN_POINT('',(137.244597,-77.906428,1.585)); +#203619 = VECTOR('',#203620,1.); +#203620 = DIRECTION('',(1.,0.,0.)); +#203621 = ORIENTED_EDGE('',*,*,#203622,.T.); +#203622 = EDGE_CURVE('',#203615,#203623,#203625,.T.); +#203623 = VERTEX_POINT('',#203624); +#203624 = CARTESIAN_POINT('',(137.543168,-77.686773,1.585)); +#203625 = LINE('',#203626,#203627); +#203626 = CARTESIAN_POINT('',(137.543168,-77.906428,1.585)); +#203627 = VECTOR('',#203628,1.); +#203628 = DIRECTION('',(0.,1.,0.)); +#203629 = ORIENTED_EDGE('',*,*,#203630,.T.); +#203630 = EDGE_CURVE('',#203623,#203631,#203633,.T.); +#203631 = VERTEX_POINT('',#203632); +#203632 = CARTESIAN_POINT('',(137.511889,-77.624216,1.585)); +#203633 = LINE('',#203634,#203635); +#203634 = CARTESIAN_POINT('',(137.543168,-77.686773,1.585)); +#203635 = VECTOR('',#203636,1.); +#203636 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#203637 = ORIENTED_EDGE('',*,*,#203638,.T.); +#203638 = EDGE_CURVE('',#203631,#203580,#203639,.T.); +#203639 = LINE('',#203640,#203641); +#203640 = CARTESIAN_POINT('',(137.511889,-77.624216,1.585)); +#203641 = VECTOR('',#203642,1.); +#203642 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#203643 = FACE_BOUND('',#203644,.F.); +#203644 = EDGE_LOOP('',(#203645,#203656,#203664,#203672,#203680,#203688, + #203696,#203704)); +#203645 = ORIENTED_EDGE('',*,*,#203646,.T.); +#203646 = EDGE_CURVE('',#203647,#203649,#203651,.T.); +#203647 = VERTEX_POINT('',#203648); +#203648 = CARTESIAN_POINT('',(137.955381,-77.553421,1.585)); +#203649 = VERTEX_POINT('',#203650); +#203650 = CARTESIAN_POINT('',(137.732384,-77.55342,1.585)); +#203651 = CIRCLE('',#203652,0.182756450193); +#203652 = AXIS2_PLACEMENT_3D('',#203653,#203654,#203655); +#203653 = CARTESIAN_POINT('',(137.84388185064,-77.6982238307,1.585)); +#203654 = DIRECTION('',(0.,0.,1.)); +#203655 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#203656 = ORIENTED_EDGE('',*,*,#203657,.T.); +#203657 = EDGE_CURVE('',#203649,#203658,#203660,.T.); +#203658 = VERTEX_POINT('',#203659); +#203659 = CARTESIAN_POINT('',(137.707837,-77.577967,1.585)); +#203660 = LINE('',#203661,#203662); +#203661 = CARTESIAN_POINT('',(137.732384,-77.55342,1.585)); +#203662 = VECTOR('',#203663,1.); +#203663 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#203664 = ORIENTED_EDGE('',*,*,#203665,.T.); +#203665 = EDGE_CURVE('',#203658,#203666,#203668,.T.); +#203666 = VERTEX_POINT('',#203667); +#203667 = CARTESIAN_POINT('',(137.673168,-77.681975,1.585)); +#203668 = LINE('',#203669,#203670); +#203669 = CARTESIAN_POINT('',(137.707837,-77.577967,1.585)); +#203670 = VECTOR('',#203671,1.); +#203671 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#203672 = ORIENTED_EDGE('',*,*,#203673,.T.); +#203673 = EDGE_CURVE('',#203666,#203674,#203676,.T.); +#203674 = VERTEX_POINT('',#203675); +#203675 = CARTESIAN_POINT('',(137.673168,-77.906428,1.585)); +#203676 = LINE('',#203677,#203678); +#203677 = CARTESIAN_POINT('',(137.673168,-77.681975,1.585)); +#203678 = VECTOR('',#203679,1.); +#203679 = DIRECTION('',(0.,-1.,0.)); +#203680 = ORIENTED_EDGE('',*,*,#203681,.T.); +#203681 = EDGE_CURVE('',#203674,#203682,#203684,.T.); +#203682 = VERTEX_POINT('',#203683); +#203683 = CARTESIAN_POINT('',(138.014597,-77.906428,1.585)); +#203684 = LINE('',#203685,#203686); +#203685 = CARTESIAN_POINT('',(137.673168,-77.906428,1.585)); +#203686 = VECTOR('',#203687,1.); +#203687 = DIRECTION('',(1.,0.,0.)); +#203688 = ORIENTED_EDGE('',*,*,#203689,.T.); +#203689 = EDGE_CURVE('',#203682,#203690,#203692,.T.); +#203690 = VERTEX_POINT('',#203691); +#203691 = CARTESIAN_POINT('',(138.014597,-77.643915,1.585)); +#203692 = LINE('',#203693,#203694); +#203693 = CARTESIAN_POINT('',(138.014597,-77.906428,1.585)); +#203694 = VECTOR('',#203695,1.); +#203695 = DIRECTION('',(0.,1.,0.)); +#203696 = ORIENTED_EDGE('',*,*,#203697,.T.); +#203697 = EDGE_CURVE('',#203690,#203698,#203700,.T.); +#203698 = VERTEX_POINT('',#203699); +#203699 = CARTESIAN_POINT('',(137.983318,-77.581358,1.585)); +#203700 = LINE('',#203701,#203702); +#203701 = CARTESIAN_POINT('',(138.014597,-77.643915,1.585)); +#203702 = VECTOR('',#203703,1.); +#203703 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#203704 = ORIENTED_EDGE('',*,*,#203705,.T.); +#203705 = EDGE_CURVE('',#203698,#203647,#203706,.T.); +#203706 = LINE('',#203707,#203708); +#203707 = CARTESIAN_POINT('',(137.983318,-77.581358,1.585)); +#203708 = VECTOR('',#203709,1.); +#203709 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#203710 = PLANE('',#203711); +#203711 = AXIS2_PLACEMENT_3D('',#203712,#203713,#203714); +#203712 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203713 = DIRECTION('',(0.,0.,1.)); +#203714 = DIRECTION('',(1.,0.,-0.)); +#203715 = SHELL_BASED_SURFACE_MODEL('',(#203716)); +#203716 = OPEN_SHELL('',(#203717)); +#203717 = ADVANCED_FACE('',(#203718),#203990,.T.); +#203718 = FACE_BOUND('',#203719,.F.); +#203719 = EDGE_LOOP('',(#203720,#203731,#203739,#203747,#203756,#203764, + #203772,#203780,#203788,#203796,#203804,#203812,#203821,#203829, + #203837,#203845,#203853,#203861,#203870,#203878,#203886,#203895, + #203903,#203911,#203919,#203927,#203935,#203943,#203951,#203960, + #203968,#203976,#203984)); +#203720 = ORIENTED_EDGE('',*,*,#203721,.T.); +#203721 = EDGE_CURVE('',#203722,#203724,#203726,.T.); +#203722 = VERTEX_POINT('',#203723); +#203723 = CARTESIAN_POINT('',(139.70079,-77.436587,1.585)); +#203724 = VERTEX_POINT('',#203725); +#203725 = CARTESIAN_POINT('',(139.824119,-77.477696,1.585)); +#203726 = CIRCLE('',#203727,6.499998485138E-02); +#203727 = AXIS2_PLACEMENT_3D('',#203728,#203729,#203730); +#203728 = CARTESIAN_POINT('',(139.76245436584,-77.45714190248,1.585)); +#203729 = DIRECTION('',(0.,0.,-1.)); +#203730 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#203731 = ORIENTED_EDGE('',*,*,#203732,.T.); +#203732 = EDGE_CURVE('',#203724,#203733,#203735,.T.); +#203733 = VERTEX_POINT('',#203734); +#203734 = CARTESIAN_POINT('',(139.784597,-77.596261,1.585)); +#203735 = LINE('',#203736,#203737); +#203736 = CARTESIAN_POINT('',(139.824119,-77.477696,1.585)); +#203737 = VECTOR('',#203738,1.); +#203738 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#203739 = ORIENTED_EDGE('',*,*,#203740,.T.); +#203740 = EDGE_CURVE('',#203733,#203741,#203743,.T.); +#203741 = VERTEX_POINT('',#203742); +#203742 = CARTESIAN_POINT('',(139.784597,-77.784654,1.585)); +#203743 = LINE('',#203744,#203745); +#203744 = CARTESIAN_POINT('',(139.784597,-77.596261,1.585)); +#203745 = VECTOR('',#203746,1.); +#203746 = DIRECTION('',(0.,-1.,0.)); +#203747 = ORIENTED_EDGE('',*,*,#203748,.T.); +#203748 = EDGE_CURVE('',#203741,#203749,#203751,.T.); +#203749 = VERTEX_POINT('',#203750); +#203750 = CARTESIAN_POINT('',(139.90637,-77.906428,1.585)); +#203751 = CIRCLE('',#203752,0.170995888391); +#203752 = AXIS2_PLACEMENT_3D('',#203753,#203754,#203755); +#203753 = CARTESIAN_POINT('',(139.9499473225,-77.74107803534,1.585)); +#203754 = DIRECTION('',(0.,0.,1.)); +#203755 = DIRECTION('',(-0.966984200949,-0.254836330052,0.)); +#203756 = ORIENTED_EDGE('',*,*,#203757,.T.); +#203757 = EDGE_CURVE('',#203749,#203758,#203760,.T.); +#203758 = VERTEX_POINT('',#203759); +#203759 = CARTESIAN_POINT('',(139.961395,-77.906428,1.585)); +#203760 = LINE('',#203761,#203762); +#203761 = CARTESIAN_POINT('',(139.90637,-77.906428,1.585)); +#203762 = VECTOR('',#203763,1.); +#203763 = DIRECTION('',(1.,0.,0.)); +#203764 = ORIENTED_EDGE('',*,*,#203765,.T.); +#203765 = EDGE_CURVE('',#203758,#203766,#203768,.T.); +#203766 = VERTEX_POINT('',#203767); +#203767 = CARTESIAN_POINT('',(140.023951,-77.87515,1.585)); +#203768 = LINE('',#203769,#203770); +#203769 = CARTESIAN_POINT('',(139.961395,-77.906428,1.585)); +#203770 = VECTOR('',#203771,1.); +#203771 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#203772 = ORIENTED_EDGE('',*,*,#203773,.T.); +#203773 = EDGE_CURVE('',#203766,#203774,#203776,.T.); +#203774 = VERTEX_POINT('',#203775); +#203775 = CARTESIAN_POINT('',(140.051889,-77.847211,1.585)); +#203776 = LINE('',#203777,#203778); +#203777 = CARTESIAN_POINT('',(140.023951,-77.87515,1.585)); +#203778 = VECTOR('',#203779,1.); +#203779 = DIRECTION('',(0.707094126371,0.707119435776,0.)); +#203780 = ORIENTED_EDGE('',*,*,#203781,.T.); +#203781 = EDGE_CURVE('',#203774,#203782,#203784,.T.); +#203782 = VERTEX_POINT('',#203783); +#203783 = CARTESIAN_POINT('',(140.086839,-77.77731,1.585)); +#203784 = LINE('',#203785,#203786); +#203785 = CARTESIAN_POINT('',(140.051889,-77.847211,1.585)); +#203786 = VECTOR('',#203787,1.); +#203787 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#203788 = ORIENTED_EDGE('',*,*,#203789,.T.); +#203789 = EDGE_CURVE('',#203782,#203790,#203792,.T.); +#203790 = VERTEX_POINT('',#203791); +#203791 = CARTESIAN_POINT('',(140.132887,-77.599502,1.585)); +#203792 = LINE('',#203793,#203794); +#203793 = CARTESIAN_POINT('',(140.086839,-77.77731,1.585)); +#203794 = VECTOR('',#203795,1.); +#203795 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#203796 = ORIENTED_EDGE('',*,*,#203797,.T.); +#203797 = EDGE_CURVE('',#203790,#203798,#203800,.T.); +#203798 = VERTEX_POINT('',#203799); +#203799 = CARTESIAN_POINT('',(140.18792,-77.496895,1.585)); +#203800 = LINE('',#203801,#203802); +#203801 = CARTESIAN_POINT('',(140.132887,-77.599502,1.585)); +#203802 = VECTOR('',#203803,1.); +#203803 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#203804 = ORIENTED_EDGE('',*,*,#203805,.T.); +#203805 = EDGE_CURVE('',#203798,#203806,#203808,.T.); +#203806 = VERTEX_POINT('',#203807); +#203807 = CARTESIAN_POINT('',(140.247671,-77.441861,1.585)); +#203808 = LINE('',#203809,#203810); +#203809 = CARTESIAN_POINT('',(140.18792,-77.496895,1.585)); +#203810 = VECTOR('',#203811,1.); +#203811 = DIRECTION('',(0.735543975152,0.677476981615,0.)); +#203812 = ORIENTED_EDGE('',*,*,#203813,.T.); +#203813 = EDGE_CURVE('',#203806,#203814,#203816,.T.); +#203814 = VERTEX_POINT('',#203815); +#203815 = CARTESIAN_POINT('',(140.477237,-77.399004,1.585)); +#203816 = CIRCLE('',#203817,0.258971949836); +#203817 = AXIS2_PLACEMENT_3D('',#203818,#203819,#203820); +#203818 = CARTESIAN_POINT('',(140.40487456064,-77.64766068736,1.585)); +#203819 = DIRECTION('',(0.,0.,-1.)); +#203820 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#203821 = ORIENTED_EDGE('',*,*,#203822,.T.); +#203822 = EDGE_CURVE('',#203814,#203823,#203825,.T.); +#203823 = VERTEX_POINT('',#203824); +#203824 = CARTESIAN_POINT('',(140.579844,-77.454037,1.585)); +#203825 = LINE('',#203826,#203827); +#203826 = CARTESIAN_POINT('',(140.477237,-77.399004,1.585)); +#203827 = VECTOR('',#203828,1.); +#203828 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#203829 = ORIENTED_EDGE('',*,*,#203830,.T.); +#203830 = EDGE_CURVE('',#203823,#203831,#203833,.T.); +#203831 = VERTEX_POINT('',#203832); +#203832 = CARTESIAN_POINT('',(140.634878,-77.513788,1.585)); +#203833 = LINE('',#203834,#203835); +#203834 = CARTESIAN_POINT('',(140.579844,-77.454037,1.585)); +#203835 = VECTOR('',#203836,1.); +#203836 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#203837 = ORIENTED_EDGE('',*,*,#203838,.T.); +#203838 = EDGE_CURVE('',#203831,#203839,#203841,.T.); +#203839 = VERTEX_POINT('',#203840); +#203840 = CARTESIAN_POINT('',(140.681681,-77.613914,1.585)); +#203841 = LINE('',#203842,#203843); +#203842 = CARTESIAN_POINT('',(140.634878,-77.513788,1.585)); +#203843 = VECTOR('',#203844,1.); +#203844 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#203845 = ORIENTED_EDGE('',*,*,#203846,.T.); +#203846 = EDGE_CURVE('',#203839,#203847,#203849,.T.); +#203847 = VERTEX_POINT('',#203848); +#203848 = CARTESIAN_POINT('',(140.682563,-77.853079,1.585)); +#203849 = LINE('',#203850,#203851); +#203850 = CARTESIAN_POINT('',(140.681681,-77.613914,1.585)); +#203851 = VECTOR('',#203852,1.); +#203852 = DIRECTION('',(3.687805500009E-03,-0.999993200022,0.)); +#203853 = ORIENTED_EDGE('',*,*,#203854,.T.); +#203854 = EDGE_CURVE('',#203847,#203855,#203857,.T.); +#203855 = VERTEX_POINT('',#203856); +#203856 = CARTESIAN_POINT('',(140.638404,-77.991983,1.585)); +#203857 = LINE('',#203858,#203859); +#203858 = CARTESIAN_POINT('',(140.682563,-77.853079,1.585)); +#203859 = VECTOR('',#203860,1.); +#203860 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#203861 = ORIENTED_EDGE('',*,*,#203862,.T.); +#203862 = EDGE_CURVE('',#203855,#203863,#203865,.T.); +#203863 = VERTEX_POINT('',#203864); +#203864 = CARTESIAN_POINT('',(140.515076,-77.950873,1.585)); +#203865 = CIRCLE('',#203866,6.499966862259E-02); +#203866 = AXIS2_PLACEMENT_3D('',#203867,#203868,#203869); +#203867 = CARTESIAN_POINT('',(140.57674006734,-77.97142779797,1.585)); +#203868 = DIRECTION('',(-0.,0.,-1.)); +#203869 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#203870 = ORIENTED_EDGE('',*,*,#203871,.T.); +#203871 = EDGE_CURVE('',#203863,#203872,#203874,.T.); +#203872 = VERTEX_POINT('',#203873); +#203873 = CARTESIAN_POINT('',(140.554597,-77.83231,1.585)); +#203874 = LINE('',#203875,#203876); +#203875 = CARTESIAN_POINT('',(140.515076,-77.950873,1.585)); +#203876 = VECTOR('',#203877,1.); +#203877 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#203878 = ORIENTED_EDGE('',*,*,#203879,.T.); +#203879 = EDGE_CURVE('',#203872,#203880,#203882,.T.); +#203880 = VERTEX_POINT('',#203881); +#203881 = CARTESIAN_POINT('',(140.554597,-77.643916,1.585)); +#203882 = LINE('',#203883,#203884); +#203883 = CARTESIAN_POINT('',(140.554597,-77.83231,1.585)); +#203884 = VECTOR('',#203885,1.); +#203885 = DIRECTION('',(0.,1.,0.)); +#203886 = ORIENTED_EDGE('',*,*,#203887,.T.); +#203887 = EDGE_CURVE('',#203880,#203888,#203890,.T.); +#203888 = VERTEX_POINT('',#203889); +#203889 = CARTESIAN_POINT('',(140.432823,-77.522142,1.585)); +#203890 = CIRCLE('',#203891,0.170999251022); +#203891 = AXIS2_PLACEMENT_3D('',#203892,#203893,#203894); +#203892 = CARTESIAN_POINT('',(140.389244,-77.687495,1.585)); +#203893 = DIRECTION('',(0.,0.,1.)); +#203894 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#203895 = ORIENTED_EDGE('',*,*,#203896,.T.); +#203896 = EDGE_CURVE('',#203888,#203897,#203899,.T.); +#203897 = VERTEX_POINT('',#203898); +#203898 = CARTESIAN_POINT('',(140.377799,-77.522142,1.585)); +#203899 = LINE('',#203900,#203901); +#203900 = CARTESIAN_POINT('',(140.432823,-77.522142,1.585)); +#203901 = VECTOR('',#203902,1.); +#203902 = DIRECTION('',(-1.,0.,0.)); +#203903 = ORIENTED_EDGE('',*,*,#203904,.T.); +#203904 = EDGE_CURVE('',#203897,#203905,#203907,.T.); +#203905 = VERTEX_POINT('',#203906); +#203906 = CARTESIAN_POINT('',(140.315243,-77.55342,1.585)); +#203907 = LINE('',#203908,#203909); +#203908 = CARTESIAN_POINT('',(140.377799,-77.522142,1.585)); +#203909 = VECTOR('',#203910,1.); +#203910 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#203911 = ORIENTED_EDGE('',*,*,#203912,.T.); +#203912 = EDGE_CURVE('',#203905,#203913,#203915,.T.); +#203913 = VERTEX_POINT('',#203914); +#203914 = CARTESIAN_POINT('',(140.287303,-77.58136,1.585)); +#203915 = LINE('',#203916,#203917); +#203916 = CARTESIAN_POINT('',(140.315243,-77.55342,1.585)); +#203917 = VECTOR('',#203918,1.); +#203918 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203919 = ORIENTED_EDGE('',*,*,#203920,.T.); +#203920 = EDGE_CURVE('',#203913,#203921,#203923,.T.); +#203921 = VERTEX_POINT('',#203922); +#203922 = CARTESIAN_POINT('',(140.252353,-77.65126,1.585)); +#203923 = LINE('',#203924,#203925); +#203924 = CARTESIAN_POINT('',(140.287303,-77.58136,1.585)); +#203925 = VECTOR('',#203926,1.); +#203926 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#203927 = ORIENTED_EDGE('',*,*,#203928,.T.); +#203928 = EDGE_CURVE('',#203921,#203929,#203931,.T.); +#203929 = VERTEX_POINT('',#203930); +#203930 = CARTESIAN_POINT('',(140.206306,-77.829068,1.585)); +#203931 = LINE('',#203932,#203933); +#203932 = CARTESIAN_POINT('',(140.252353,-77.65126,1.585)); +#203933 = VECTOR('',#203934,1.); +#203934 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#203935 = ORIENTED_EDGE('',*,*,#203936,.T.); +#203936 = EDGE_CURVE('',#203929,#203937,#203939,.T.); +#203937 = VERTEX_POINT('',#203938); +#203938 = CARTESIAN_POINT('',(140.151273,-77.931676,1.585)); +#203939 = LINE('',#203940,#203941); +#203940 = CARTESIAN_POINT('',(140.206306,-77.829068,1.585)); +#203941 = VECTOR('',#203942,1.); +#203942 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#203943 = ORIENTED_EDGE('',*,*,#203944,.T.); +#203944 = EDGE_CURVE('',#203937,#203945,#203947,.T.); +#203945 = VERTEX_POINT('',#203946); +#203946 = CARTESIAN_POINT('',(140.091523,-77.986709,1.585)); +#203947 = LINE('',#203948,#203949); +#203948 = CARTESIAN_POINT('',(140.151273,-77.931676,1.585)); +#203949 = VECTOR('',#203950,1.); +#203950 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#203951 = ORIENTED_EDGE('',*,*,#203952,.T.); +#203952 = EDGE_CURVE('',#203945,#203953,#203955,.T.); +#203953 = VERTEX_POINT('',#203954); +#203954 = CARTESIAN_POINT('',(139.768013,-77.980322,1.585)); +#203955 = CIRCLE('',#203956,0.260197694649); +#203956 = AXIS2_PLACEMENT_3D('',#203957,#203958,#203959); +#203957 = CARTESIAN_POINT('',(139.93379048924,-77.77977109783,1.585)); +#203958 = DIRECTION('',(-0.,0.,-1.)); +#203959 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#203960 = ORIENTED_EDGE('',*,*,#203961,.T.); +#203961 = EDGE_CURVE('',#203953,#203962,#203964,.T.); +#203962 = VERTEX_POINT('',#203963); +#203963 = CARTESIAN_POINT('',(139.710702,-77.923011,1.585)); +#203964 = LINE('',#203965,#203966); +#203965 = CARTESIAN_POINT('',(139.768013,-77.980322,1.585)); +#203966 = VECTOR('',#203967,1.); +#203967 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#203968 = ORIENTED_EDGE('',*,*,#203969,.T.); +#203969 = EDGE_CURVE('',#203962,#203970,#203972,.T.); +#203970 = VERTEX_POINT('',#203971); +#203971 = CARTESIAN_POINT('',(139.657512,-77.814655,1.585)); +#203972 = LINE('',#203973,#203974); +#203973 = CARTESIAN_POINT('',(139.710702,-77.923011,1.585)); +#203974 = VECTOR('',#203975,1.); +#203975 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#203976 = ORIENTED_EDGE('',*,*,#203977,.T.); +#203977 = EDGE_CURVE('',#203970,#203978,#203980,.T.); +#203978 = VERTEX_POINT('',#203979); +#203979 = CARTESIAN_POINT('',(139.65663,-77.575491,1.585)); +#203980 = LINE('',#203981,#203982); +#203981 = CARTESIAN_POINT('',(139.657512,-77.814655,1.585)); +#203982 = VECTOR('',#203983,1.); +#203983 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#203984 = ORIENTED_EDGE('',*,*,#203985,.T.); +#203985 = EDGE_CURVE('',#203978,#203722,#203986,.T.); +#203986 = LINE('',#203987,#203988); +#203987 = CARTESIAN_POINT('',(139.65663,-77.575491,1.585)); +#203988 = VECTOR('',#203989,1.); +#203989 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#203990 = PLANE('',#203991); +#203991 = AXIS2_PLACEMENT_3D('',#203992,#203993,#203994); +#203992 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203993 = DIRECTION('',(0.,0.,1.)); +#203994 = DIRECTION('',(1.,0.,-0.)); +#203995 = SHELL_BASED_SURFACE_MODEL('',(#203996)); +#203996 = OPEN_SHELL('',(#203997)); +#203997 = ADVANCED_FACE('',(#203998,#204124,#204191),#204258,.T.); +#203998 = FACE_BOUND('',#203999,.F.); +#203999 = EDGE_LOOP('',(#204000,#204011,#204019,#204027,#204035,#204043, + #204052,#204060,#204069,#204077,#204086,#204094,#204102,#204110, + #204118)); +#204000 = ORIENTED_EDGE('',*,*,#204001,.T.); +#204001 = EDGE_CURVE('',#204002,#204004,#204006,.T.); +#204002 = VERTEX_POINT('',#204003); +#204003 = CARTESIAN_POINT('',(107.184813,-77.399004,1.585)); +#204004 = VERTEX_POINT('',#204005); +#204005 = CARTESIAN_POINT('',(107.457237,-77.356147,1.585)); +#204006 = CIRCLE('',#204007,0.328851911789); +#204007 = AXIS2_PLACEMENT_3D('',#204008,#204009,#204010); +#204008 = CARTESIAN_POINT('',(107.36742108589,-77.67249598681,1.585)); +#204009 = DIRECTION('',(0.,0.,-1.)); +#204010 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204011 = ORIENTED_EDGE('',*,*,#204012,.T.); +#204012 = EDGE_CURVE('',#204004,#204013,#204015,.T.); +#204013 = VERTEX_POINT('',#204014); +#204014 = CARTESIAN_POINT('',(107.559843,-77.41118,1.585)); +#204015 = LINE('',#204016,#204017); +#204016 = CARTESIAN_POINT('',(107.457237,-77.356147,1.585)); +#204017 = VECTOR('',#204018,1.); +#204018 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204019 = ORIENTED_EDGE('',*,*,#204020,.T.); +#204020 = EDGE_CURVE('',#204013,#204021,#204023,.T.); +#204021 = VERTEX_POINT('',#204022); +#204022 = CARTESIAN_POINT('',(107.614878,-77.47093,1.585)); +#204023 = LINE('',#204024,#204025); +#204024 = CARTESIAN_POINT('',(107.559843,-77.41118,1.585)); +#204025 = VECTOR('',#204026,1.); +#204026 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204027 = ORIENTED_EDGE('',*,*,#204028,.T.); +#204028 = EDGE_CURVE('',#204021,#204029,#204031,.T.); +#204029 = VERTEX_POINT('',#204030); +#204030 = CARTESIAN_POINT('',(107.661681,-77.571057,1.585)); +#204031 = LINE('',#204032,#204033); +#204032 = CARTESIAN_POINT('',(107.614878,-77.47093,1.585)); +#204033 = VECTOR('',#204034,1.); +#204034 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204035 = ORIENTED_EDGE('',*,*,#204036,.T.); +#204036 = EDGE_CURVE('',#204029,#204037,#204039,.T.); +#204037 = VERTEX_POINT('',#204038); +#204038 = CARTESIAN_POINT('',(107.664597,-77.928571,1.585)); +#204039 = LINE('',#204040,#204041); +#204040 = CARTESIAN_POINT('',(107.661681,-77.571057,1.585)); +#204041 = VECTOR('',#204042,1.); +#204042 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#204043 = ORIENTED_EDGE('',*,*,#204044,.T.); +#204044 = EDGE_CURVE('',#204037,#204045,#204047,.T.); +#204045 = VERTEX_POINT('',#204046); +#204046 = CARTESIAN_POINT('',(107.599597,-77.993571,1.585)); +#204047 = CIRCLE('',#204048,6.500103935388E-02); +#204048 = AXIS2_PLACEMENT_3D('',#204049,#204050,#204051); +#204049 = CARTESIAN_POINT('',(107.59959596065,-77.92856996065,1.585)); +#204050 = DIRECTION('',(0.,0.,-1.)); +#204051 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#204052 = ORIENTED_EDGE('',*,*,#204053,.T.); +#204053 = EDGE_CURVE('',#204045,#204054,#204056,.T.); +#204054 = VERTEX_POINT('',#204055); +#204055 = CARTESIAN_POINT('',(106.699597,-77.993571,1.585)); +#204056 = LINE('',#204057,#204058); +#204057 = CARTESIAN_POINT('',(107.599597,-77.993571,1.585)); +#204058 = VECTOR('',#204059,1.); +#204059 = DIRECTION('',(-1.,0.,0.)); +#204060 = ORIENTED_EDGE('',*,*,#204061,.T.); +#204061 = EDGE_CURVE('',#204054,#204062,#204064,.T.); +#204062 = VERTEX_POINT('',#204063); +#204063 = CARTESIAN_POINT('',(106.634597,-77.928571,1.585)); +#204064 = CIRCLE('',#204065,6.50010393539E-02); +#204065 = AXIS2_PLACEMENT_3D('',#204066,#204067,#204068); +#204066 = CARTESIAN_POINT('',(106.69959803934,-77.92856996065,1.585)); +#204067 = DIRECTION('',(0.,0.,-1.)); +#204068 = DIRECTION('',(-1.598967649219E-05,-0.999999999872,-0.)); +#204069 = ORIENTED_EDGE('',*,*,#204070,.T.); +#204070 = EDGE_CURVE('',#204062,#204071,#204073,.T.); +#204071 = VERTEX_POINT('',#204072); +#204072 = CARTESIAN_POINT('',(106.637512,-77.613914,1.585)); +#204073 = LINE('',#204074,#204075); +#204074 = CARTESIAN_POINT('',(106.634597,-77.928571,1.585)); +#204075 = VECTOR('',#204076,1.); +#204076 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#204077 = ORIENTED_EDGE('',*,*,#204078,.T.); +#204078 = EDGE_CURVE('',#204071,#204079,#204081,.T.); +#204079 = VERTEX_POINT('',#204080); +#204080 = CARTESIAN_POINT('',(106.856368,-77.395057,1.585)); +#204081 = CIRCLE('',#204082,0.308109459502); +#204082 = AXIS2_PLACEMENT_3D('',#204083,#204084,#204085); +#204083 = CARTESIAN_POINT('',(106.93533145359,-77.69287609279,1.585)); +#204084 = DIRECTION('',(0.,0.,-1.)); +#204085 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204086 = ORIENTED_EDGE('',*,*,#204087,.T.); +#204087 = EDGE_CURVE('',#204079,#204088,#204090,.T.); +#204088 = VERTEX_POINT('',#204089); +#204089 = CARTESIAN_POINT('',(106.971396,-77.395057,1.585)); +#204090 = LINE('',#204091,#204092); +#204091 = CARTESIAN_POINT('',(106.856368,-77.395057,1.585)); +#204092 = VECTOR('',#204093,1.); +#204093 = DIRECTION('',(1.,0.,0.)); +#204094 = ORIENTED_EDGE('',*,*,#204095,.T.); +#204095 = EDGE_CURVE('',#204088,#204096,#204098,.T.); +#204096 = VERTEX_POINT('',#204097); +#204097 = CARTESIAN_POINT('',(107.079761,-77.448254,1.585)); +#204098 = LINE('',#204099,#204100); +#204099 = CARTESIAN_POINT('',(106.971396,-77.395057,1.585)); +#204100 = VECTOR('',#204101,1.); +#204101 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204102 = ORIENTED_EDGE('',*,*,#204103,.T.); +#204103 = EDGE_CURVE('',#204096,#204104,#204106,.T.); +#204104 = VERTEX_POINT('',#204105); +#204105 = CARTESIAN_POINT('',(107.110973,-77.475124,1.585)); +#204106 = LINE('',#204107,#204108); +#204107 = CARTESIAN_POINT('',(107.079761,-77.448254,1.585)); +#204108 = VECTOR('',#204109,1.); +#204109 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204110 = ORIENTED_EDGE('',*,*,#204111,.T.); +#204111 = EDGE_CURVE('',#204104,#204112,#204114,.T.); +#204112 = VERTEX_POINT('',#204113); +#204113 = CARTESIAN_POINT('',(107.125063,-77.454037,1.585)); +#204114 = LINE('',#204115,#204116); +#204115 = CARTESIAN_POINT('',(107.110973,-77.475124,1.585)); +#204116 = VECTOR('',#204117,1.); +#204117 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204118 = ORIENTED_EDGE('',*,*,#204119,.T.); +#204119 = EDGE_CURVE('',#204112,#204002,#204120,.T.); +#204120 = LINE('',#204121,#204122); +#204121 = CARTESIAN_POINT('',(107.125063,-77.454037,1.585)); +#204122 = VECTOR('',#204123,1.); +#204123 = DIRECTION('',(0.73554445943,0.677476455829,0.)); +#204124 = FACE_BOUND('',#204125,.F.); +#204125 = EDGE_LOOP('',(#204126,#204137,#204145,#204153,#204161,#204169, + #204177,#204185)); +#204126 = ORIENTED_EDGE('',*,*,#204127,.T.); +#204127 = EDGE_CURVE('',#204128,#204130,#204132,.T.); +#204128 = VERTEX_POINT('',#204129); +#204129 = CARTESIAN_POINT('',(107.003952,-77.55342,1.585)); +#204130 = VERTEX_POINT('',#204131); +#204131 = CARTESIAN_POINT('',(106.823814,-77.55342,1.585)); +#204132 = CIRCLE('',#204133,0.136032349131); +#204133 = AXIS2_PLACEMENT_3D('',#204134,#204135,#204136); +#204134 = CARTESIAN_POINT('',(106.913883,-77.655363,1.585)); +#204135 = DIRECTION('',(0.,0.,1.)); +#204136 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204137 = ORIENTED_EDGE('',*,*,#204138,.T.); +#204138 = EDGE_CURVE('',#204130,#204139,#204141,.T.); +#204139 = VERTEX_POINT('',#204140); +#204140 = CARTESIAN_POINT('',(106.795876,-77.581358,1.585)); +#204141 = LINE('',#204142,#204143); +#204142 = CARTESIAN_POINT('',(106.823814,-77.55342,1.585)); +#204143 = VECTOR('',#204144,1.); +#204144 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204145 = ORIENTED_EDGE('',*,*,#204146,.T.); +#204146 = EDGE_CURVE('',#204139,#204147,#204149,.T.); +#204147 = VERTEX_POINT('',#204148); +#204148 = CARTESIAN_POINT('',(106.764597,-77.643916,1.585)); +#204149 = LINE('',#204150,#204151); +#204150 = CARTESIAN_POINT('',(106.795876,-77.581358,1.585)); +#204151 = VECTOR('',#204152,1.); +#204152 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204153 = ORIENTED_EDGE('',*,*,#204154,.T.); +#204154 = EDGE_CURVE('',#204147,#204155,#204157,.T.); +#204155 = VERTEX_POINT('',#204156); +#204156 = CARTESIAN_POINT('',(106.764597,-77.863571,1.585)); +#204157 = LINE('',#204158,#204159); +#204158 = CARTESIAN_POINT('',(106.764597,-77.643916,1.585)); +#204159 = VECTOR('',#204160,1.); +#204160 = DIRECTION('',(0.,-1.,0.)); +#204161 = ORIENTED_EDGE('',*,*,#204162,.T.); +#204162 = EDGE_CURVE('',#204155,#204163,#204165,.T.); +#204163 = VERTEX_POINT('',#204164); +#204164 = CARTESIAN_POINT('',(107.063168,-77.863571,1.585)); +#204165 = LINE('',#204166,#204167); +#204166 = CARTESIAN_POINT('',(106.764597,-77.863571,1.585)); +#204167 = VECTOR('',#204168,1.); +#204168 = DIRECTION('',(1.,0.,0.)); +#204169 = ORIENTED_EDGE('',*,*,#204170,.T.); +#204170 = EDGE_CURVE('',#204163,#204171,#204173,.T.); +#204171 = VERTEX_POINT('',#204172); +#204172 = CARTESIAN_POINT('',(107.063168,-77.643916,1.585)); +#204173 = LINE('',#204174,#204175); +#204174 = CARTESIAN_POINT('',(107.063168,-77.863571,1.585)); +#204175 = VECTOR('',#204176,1.); +#204176 = DIRECTION('',(0.,1.,0.)); +#204177 = ORIENTED_EDGE('',*,*,#204178,.T.); +#204178 = EDGE_CURVE('',#204171,#204179,#204181,.T.); +#204179 = VERTEX_POINT('',#204180); +#204180 = CARTESIAN_POINT('',(107.031889,-77.581359,1.585)); +#204181 = LINE('',#204182,#204183); +#204182 = CARTESIAN_POINT('',(107.063168,-77.643916,1.585)); +#204183 = VECTOR('',#204184,1.); +#204184 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204185 = ORIENTED_EDGE('',*,*,#204186,.T.); +#204186 = EDGE_CURVE('',#204179,#204128,#204187,.T.); +#204187 = LINE('',#204188,#204189); +#204188 = CARTESIAN_POINT('',(107.031889,-77.581359,1.585)); +#204189 = VECTOR('',#204190,1.); +#204190 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#204191 = FACE_BOUND('',#204192,.F.); +#204192 = EDGE_LOOP('',(#204193,#204204,#204212,#204220,#204228,#204236, + #204244,#204252)); +#204193 = ORIENTED_EDGE('',*,*,#204194,.T.); +#204194 = EDGE_CURVE('',#204195,#204197,#204199,.T.); +#204195 = VERTEX_POINT('',#204196); +#204196 = CARTESIAN_POINT('',(107.475381,-77.510564,1.585)); +#204197 = VERTEX_POINT('',#204198); +#204198 = CARTESIAN_POINT('',(107.252384,-77.510563,1.585)); +#204199 = CIRCLE('',#204200,0.182756450193); +#204200 = AXIS2_PLACEMENT_3D('',#204201,#204202,#204203); +#204201 = CARTESIAN_POINT('',(107.36388185064,-77.6553668307,1.585)); +#204202 = DIRECTION('',(0.,0.,1.)); +#204203 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#204204 = ORIENTED_EDGE('',*,*,#204205,.T.); +#204205 = EDGE_CURVE('',#204197,#204206,#204208,.T.); +#204206 = VERTEX_POINT('',#204207); +#204207 = CARTESIAN_POINT('',(107.227837,-77.53511,1.585)); +#204208 = LINE('',#204209,#204210); +#204209 = CARTESIAN_POINT('',(107.252384,-77.510563,1.585)); +#204210 = VECTOR('',#204211,1.); +#204211 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#204212 = ORIENTED_EDGE('',*,*,#204213,.T.); +#204213 = EDGE_CURVE('',#204206,#204214,#204216,.T.); +#204214 = VERTEX_POINT('',#204215); +#204215 = CARTESIAN_POINT('',(107.193168,-77.639118,1.585)); +#204216 = LINE('',#204217,#204218); +#204217 = CARTESIAN_POINT('',(107.227837,-77.53511,1.585)); +#204218 = VECTOR('',#204219,1.); +#204219 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#204220 = ORIENTED_EDGE('',*,*,#204221,.T.); +#204221 = EDGE_CURVE('',#204214,#204222,#204224,.T.); +#204222 = VERTEX_POINT('',#204223); +#204223 = CARTESIAN_POINT('',(107.193168,-77.863571,1.585)); +#204224 = LINE('',#204225,#204226); +#204225 = CARTESIAN_POINT('',(107.193168,-77.639118,1.585)); +#204226 = VECTOR('',#204227,1.); +#204227 = DIRECTION('',(0.,-1.,0.)); +#204228 = ORIENTED_EDGE('',*,*,#204229,.T.); +#204229 = EDGE_CURVE('',#204222,#204230,#204232,.T.); +#204230 = VERTEX_POINT('',#204231); +#204231 = CARTESIAN_POINT('',(107.534597,-77.863571,1.585)); +#204232 = LINE('',#204233,#204234); +#204233 = CARTESIAN_POINT('',(107.193168,-77.863571,1.585)); +#204234 = VECTOR('',#204235,1.); +#204235 = DIRECTION('',(1.,0.,0.)); +#204236 = ORIENTED_EDGE('',*,*,#204237,.T.); +#204237 = EDGE_CURVE('',#204230,#204238,#204240,.T.); +#204238 = VERTEX_POINT('',#204239); +#204239 = CARTESIAN_POINT('',(107.534597,-77.601058,1.585)); +#204240 = LINE('',#204241,#204242); +#204241 = CARTESIAN_POINT('',(107.534597,-77.863571,1.585)); +#204242 = VECTOR('',#204243,1.); +#204243 = DIRECTION('',(0.,1.,0.)); +#204244 = ORIENTED_EDGE('',*,*,#204245,.T.); +#204245 = EDGE_CURVE('',#204238,#204246,#204248,.T.); +#204246 = VERTEX_POINT('',#204247); +#204247 = CARTESIAN_POINT('',(107.503318,-77.538501,1.585)); +#204248 = LINE('',#204249,#204250); +#204249 = CARTESIAN_POINT('',(107.534597,-77.601058,1.585)); +#204250 = VECTOR('',#204251,1.); +#204251 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204252 = ORIENTED_EDGE('',*,*,#204253,.T.); +#204253 = EDGE_CURVE('',#204246,#204195,#204254,.T.); +#204254 = LINE('',#204255,#204256); +#204255 = CARTESIAN_POINT('',(107.503318,-77.538501,1.585)); +#204256 = VECTOR('',#204257,1.); +#204257 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204258 = PLANE('',#204259); +#204259 = AXIS2_PLACEMENT_3D('',#204260,#204261,#204262); +#204260 = CARTESIAN_POINT('',(0.,0.,1.585)); +#204261 = DIRECTION('',(0.,0.,1.)); +#204262 = DIRECTION('',(1.,0.,-0.)); +#204263 = SHELL_BASED_SURFACE_MODEL('',(#204264)); +#204264 = OPEN_SHELL('',(#204265)); +#204265 = ADVANCED_FACE('',(#204266,#204392,#204459),#204526,.T.); +#204266 = FACE_BOUND('',#204267,.F.); +#204267 = EDGE_LOOP('',(#204268,#204279,#204287,#204295,#204303,#204311, + #204320,#204328,#204337,#204345,#204354,#204362,#204370,#204378, + #204386)); +#204268 = ORIENTED_EDGE('',*,*,#204269,.T.); +#204269 = EDGE_CURVE('',#204270,#204272,#204274,.T.); +#204270 = VERTEX_POINT('',#204271); +#204271 = CARTESIAN_POINT('',(109.724813,-77.399004,1.585)); +#204272 = VERTEX_POINT('',#204273); +#204273 = CARTESIAN_POINT('',(109.997237,-77.356147,1.585)); +#204274 = CIRCLE('',#204275,0.328851911788); +#204275 = AXIS2_PLACEMENT_3D('',#204276,#204277,#204278); +#204276 = CARTESIAN_POINT('',(109.90742108589,-77.67249598681,1.585)); +#204277 = DIRECTION('',(0.,0.,-1.)); +#204278 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204279 = ORIENTED_EDGE('',*,*,#204280,.T.); +#204280 = EDGE_CURVE('',#204272,#204281,#204283,.T.); +#204281 = VERTEX_POINT('',#204282); +#204282 = CARTESIAN_POINT('',(110.099843,-77.41118,1.585)); +#204283 = LINE('',#204284,#204285); +#204284 = CARTESIAN_POINT('',(109.997237,-77.356147,1.585)); +#204285 = VECTOR('',#204286,1.); +#204286 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204287 = ORIENTED_EDGE('',*,*,#204288,.T.); +#204288 = EDGE_CURVE('',#204281,#204289,#204291,.T.); +#204289 = VERTEX_POINT('',#204290); +#204290 = CARTESIAN_POINT('',(110.154878,-77.47093,1.585)); +#204291 = LINE('',#204292,#204293); +#204292 = CARTESIAN_POINT('',(110.099843,-77.41118,1.585)); +#204293 = VECTOR('',#204294,1.); +#204294 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204295 = ORIENTED_EDGE('',*,*,#204296,.T.); +#204296 = EDGE_CURVE('',#204289,#204297,#204299,.T.); +#204297 = VERTEX_POINT('',#204298); +#204298 = CARTESIAN_POINT('',(110.201681,-77.571057,1.585)); +#204299 = LINE('',#204300,#204301); +#204300 = CARTESIAN_POINT('',(110.154878,-77.47093,1.585)); +#204301 = VECTOR('',#204302,1.); +#204302 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204303 = ORIENTED_EDGE('',*,*,#204304,.T.); +#204304 = EDGE_CURVE('',#204297,#204305,#204307,.T.); +#204305 = VERTEX_POINT('',#204306); +#204306 = CARTESIAN_POINT('',(110.204597,-77.928571,1.585)); +#204307 = LINE('',#204308,#204309); +#204308 = CARTESIAN_POINT('',(110.201681,-77.571057,1.585)); +#204309 = VECTOR('',#204310,1.); +#204310 = DIRECTION('',(8.15605265947E-03,-0.999966738849,0.)); +#204311 = ORIENTED_EDGE('',*,*,#204312,.T.); +#204312 = EDGE_CURVE('',#204305,#204313,#204315,.T.); +#204313 = VERTEX_POINT('',#204314); +#204314 = CARTESIAN_POINT('',(110.139597,-77.993571,1.585)); +#204315 = CIRCLE('',#204316,6.500103935393E-02); +#204316 = AXIS2_PLACEMENT_3D('',#204317,#204318,#204319); +#204317 = CARTESIAN_POINT('',(110.13959596065,-77.92856996065,1.585)); +#204318 = DIRECTION('',(0.,0.,-1.)); +#204319 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#204320 = ORIENTED_EDGE('',*,*,#204321,.T.); +#204321 = EDGE_CURVE('',#204313,#204322,#204324,.T.); +#204322 = VERTEX_POINT('',#204323); +#204323 = CARTESIAN_POINT('',(109.239597,-77.993571,1.585)); +#204324 = LINE('',#204325,#204326); +#204325 = CARTESIAN_POINT('',(110.139597,-77.993571,1.585)); +#204326 = VECTOR('',#204327,1.); +#204327 = DIRECTION('',(-1.,0.,0.)); +#204328 = ORIENTED_EDGE('',*,*,#204329,.T.); +#204329 = EDGE_CURVE('',#204322,#204330,#204332,.T.); +#204330 = VERTEX_POINT('',#204331); +#204331 = CARTESIAN_POINT('',(109.174597,-77.928571,1.585)); +#204332 = CIRCLE('',#204333,6.500103935389E-02); +#204333 = AXIS2_PLACEMENT_3D('',#204334,#204335,#204336); +#204334 = CARTESIAN_POINT('',(109.23959803934,-77.92856996065,1.585)); +#204335 = DIRECTION('',(0.,0.,-1.)); +#204336 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#204337 = ORIENTED_EDGE('',*,*,#204338,.T.); +#204338 = EDGE_CURVE('',#204330,#204339,#204341,.T.); +#204339 = VERTEX_POINT('',#204340); +#204340 = CARTESIAN_POINT('',(109.177512,-77.613914,1.585)); +#204341 = LINE('',#204342,#204343); +#204342 = CARTESIAN_POINT('',(109.174597,-77.928571,1.585)); +#204343 = VECTOR('',#204344,1.); +#204344 = DIRECTION('',(9.263658273644E-03,0.999957091397,0.)); +#204345 = ORIENTED_EDGE('',*,*,#204346,.T.); +#204346 = EDGE_CURVE('',#204339,#204347,#204349,.T.); +#204347 = VERTEX_POINT('',#204348); +#204348 = CARTESIAN_POINT('',(109.396368,-77.395057,1.585)); +#204349 = CIRCLE('',#204350,0.308109459502); +#204350 = AXIS2_PLACEMENT_3D('',#204351,#204352,#204353); +#204351 = CARTESIAN_POINT('',(109.47533145359,-77.69287609279,1.585)); +#204352 = DIRECTION('',(0.,0.,-1.)); +#204353 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204354 = ORIENTED_EDGE('',*,*,#204355,.T.); +#204355 = EDGE_CURVE('',#204347,#204356,#204358,.T.); +#204356 = VERTEX_POINT('',#204357); +#204357 = CARTESIAN_POINT('',(109.511396,-77.395057,1.585)); +#204358 = LINE('',#204359,#204360); +#204359 = CARTESIAN_POINT('',(109.396368,-77.395057,1.585)); +#204360 = VECTOR('',#204361,1.); +#204361 = DIRECTION('',(1.,0.,0.)); +#204362 = ORIENTED_EDGE('',*,*,#204363,.T.); +#204363 = EDGE_CURVE('',#204356,#204364,#204366,.T.); +#204364 = VERTEX_POINT('',#204365); +#204365 = CARTESIAN_POINT('',(109.619761,-77.448254,1.585)); +#204366 = LINE('',#204367,#204368); +#204367 = CARTESIAN_POINT('',(109.511396,-77.395057,1.585)); +#204368 = VECTOR('',#204369,1.); +#204369 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204370 = ORIENTED_EDGE('',*,*,#204371,.T.); +#204371 = EDGE_CURVE('',#204364,#204372,#204374,.T.); +#204372 = VERTEX_POINT('',#204373); +#204373 = CARTESIAN_POINT('',(109.650973,-77.475124,1.585)); +#204374 = LINE('',#204375,#204376); +#204375 = CARTESIAN_POINT('',(109.619761,-77.448254,1.585)); +#204376 = VECTOR('',#204377,1.); +#204377 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204378 = ORIENTED_EDGE('',*,*,#204379,.T.); +#204379 = EDGE_CURVE('',#204372,#204380,#204382,.T.); +#204380 = VERTEX_POINT('',#204381); +#204381 = CARTESIAN_POINT('',(109.665063,-77.454037,1.585)); +#204382 = LINE('',#204383,#204384); +#204383 = CARTESIAN_POINT('',(109.650973,-77.475124,1.585)); +#204384 = VECTOR('',#204385,1.); +#204385 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204386 = ORIENTED_EDGE('',*,*,#204387,.T.); +#204387 = EDGE_CURVE('',#204380,#204270,#204388,.T.); +#204388 = LINE('',#204389,#204390); +#204389 = CARTESIAN_POINT('',(109.665063,-77.454037,1.585)); +#204390 = VECTOR('',#204391,1.); +#204391 = DIRECTION('',(0.735544459429,0.677476455829,0.)); +#204392 = FACE_BOUND('',#204393,.F.); +#204393 = EDGE_LOOP('',(#204394,#204405,#204413,#204421,#204429,#204437, + #204445,#204453)); +#204394 = ORIENTED_EDGE('',*,*,#204395,.T.); +#204395 = EDGE_CURVE('',#204396,#204398,#204400,.T.); +#204396 = VERTEX_POINT('',#204397); +#204397 = CARTESIAN_POINT('',(109.543952,-77.55342,1.585)); +#204398 = VERTEX_POINT('',#204399); +#204399 = CARTESIAN_POINT('',(109.363814,-77.55342,1.585)); +#204400 = CIRCLE('',#204401,0.136032349131); +#204401 = AXIS2_PLACEMENT_3D('',#204402,#204403,#204404); +#204402 = CARTESIAN_POINT('',(109.453883,-77.655363,1.585)); +#204403 = DIRECTION('',(0.,0.,1.)); +#204404 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204405 = ORIENTED_EDGE('',*,*,#204406,.T.); +#204406 = EDGE_CURVE('',#204398,#204407,#204409,.T.); +#204407 = VERTEX_POINT('',#204408); +#204408 = CARTESIAN_POINT('',(109.335876,-77.581358,1.585)); +#204409 = LINE('',#204410,#204411); +#204410 = CARTESIAN_POINT('',(109.363814,-77.55342,1.585)); +#204411 = VECTOR('',#204412,1.); +#204412 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#204413 = ORIENTED_EDGE('',*,*,#204414,.T.); +#204414 = EDGE_CURVE('',#204407,#204415,#204417,.T.); +#204415 = VERTEX_POINT('',#204416); +#204416 = CARTESIAN_POINT('',(109.304597,-77.643916,1.585)); +#204417 = LINE('',#204418,#204419); +#204418 = CARTESIAN_POINT('',(109.335876,-77.581358,1.585)); +#204419 = VECTOR('',#204420,1.); +#204420 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204421 = ORIENTED_EDGE('',*,*,#204422,.T.); +#204422 = EDGE_CURVE('',#204415,#204423,#204425,.T.); +#204423 = VERTEX_POINT('',#204424); +#204424 = CARTESIAN_POINT('',(109.304597,-77.863571,1.585)); +#204425 = LINE('',#204426,#204427); +#204426 = CARTESIAN_POINT('',(109.304597,-77.643916,1.585)); +#204427 = VECTOR('',#204428,1.); +#204428 = DIRECTION('',(0.,-1.,0.)); +#204429 = ORIENTED_EDGE('',*,*,#204430,.T.); +#204430 = EDGE_CURVE('',#204423,#204431,#204433,.T.); +#204431 = VERTEX_POINT('',#204432); +#204432 = CARTESIAN_POINT('',(109.603168,-77.863571,1.585)); +#204433 = LINE('',#204434,#204435); +#204434 = CARTESIAN_POINT('',(109.304597,-77.863571,1.585)); +#204435 = VECTOR('',#204436,1.); +#204436 = DIRECTION('',(1.,0.,0.)); +#204437 = ORIENTED_EDGE('',*,*,#204438,.T.); +#204438 = EDGE_CURVE('',#204431,#204439,#204441,.T.); +#204439 = VERTEX_POINT('',#204440); +#204440 = CARTESIAN_POINT('',(109.603168,-77.643916,1.585)); +#204441 = LINE('',#204442,#204443); +#204442 = CARTESIAN_POINT('',(109.603168,-77.863571,1.585)); +#204443 = VECTOR('',#204444,1.); +#204444 = DIRECTION('',(0.,1.,0.)); +#204445 = ORIENTED_EDGE('',*,*,#204446,.T.); +#204446 = EDGE_CURVE('',#204439,#204447,#204449,.T.); +#204447 = VERTEX_POINT('',#204448); +#204448 = CARTESIAN_POINT('',(109.571889,-77.581359,1.585)); +#204449 = LINE('',#204450,#204451); +#204450 = CARTESIAN_POINT('',(109.603168,-77.643916,1.585)); +#204451 = VECTOR('',#204452,1.); +#204452 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204453 = ORIENTED_EDGE('',*,*,#204454,.T.); +#204454 = EDGE_CURVE('',#204447,#204396,#204455,.T.); +#204455 = LINE('',#204456,#204457); +#204456 = CARTESIAN_POINT('',(109.571889,-77.581359,1.585)); +#204457 = VECTOR('',#204458,1.); +#204458 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#204459 = FACE_BOUND('',#204460,.F.); +#204460 = EDGE_LOOP('',(#204461,#204472,#204480,#204488,#204496,#204504, + #204512,#204520)); +#204461 = ORIENTED_EDGE('',*,*,#204462,.T.); +#204462 = EDGE_CURVE('',#204463,#204465,#204467,.T.); +#204463 = VERTEX_POINT('',#204464); +#204464 = CARTESIAN_POINT('',(110.015381,-77.510564,1.585)); +#204465 = VERTEX_POINT('',#204466); +#204466 = CARTESIAN_POINT('',(109.792384,-77.510563,1.585)); +#204467 = CIRCLE('',#204468,0.182756450193); +#204468 = AXIS2_PLACEMENT_3D('',#204469,#204470,#204471); +#204469 = CARTESIAN_POINT('',(109.90388185064,-77.6553668307,1.585)); +#204470 = DIRECTION('',(0.,0.,1.)); +#204471 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#204472 = ORIENTED_EDGE('',*,*,#204473,.T.); +#204473 = EDGE_CURVE('',#204465,#204474,#204476,.T.); +#204474 = VERTEX_POINT('',#204475); +#204475 = CARTESIAN_POINT('',(109.767837,-77.53511,1.585)); +#204476 = LINE('',#204477,#204478); +#204477 = CARTESIAN_POINT('',(109.792384,-77.510563,1.585)); +#204478 = VECTOR('',#204479,1.); +#204479 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204480 = ORIENTED_EDGE('',*,*,#204481,.T.); +#204481 = EDGE_CURVE('',#204474,#204482,#204484,.T.); +#204482 = VERTEX_POINT('',#204483); +#204483 = CARTESIAN_POINT('',(109.733168,-77.639118,1.585)); +#204484 = LINE('',#204485,#204486); +#204485 = CARTESIAN_POINT('',(109.767837,-77.53511,1.585)); +#204486 = VECTOR('',#204487,1.); +#204487 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#204488 = ORIENTED_EDGE('',*,*,#204489,.T.); +#204489 = EDGE_CURVE('',#204482,#204490,#204492,.T.); +#204490 = VERTEX_POINT('',#204491); +#204491 = CARTESIAN_POINT('',(109.733168,-77.863571,1.585)); +#204492 = LINE('',#204493,#204494); +#204493 = CARTESIAN_POINT('',(109.733168,-77.639118,1.585)); +#204494 = VECTOR('',#204495,1.); +#204495 = DIRECTION('',(0.,-1.,0.)); +#204496 = ORIENTED_EDGE('',*,*,#204497,.T.); +#204497 = EDGE_CURVE('',#204490,#204498,#204500,.T.); +#204498 = VERTEX_POINT('',#204499); +#204499 = CARTESIAN_POINT('',(110.074597,-77.863571,1.585)); +#204500 = LINE('',#204501,#204502); +#204501 = CARTESIAN_POINT('',(109.733168,-77.863571,1.585)); +#204502 = VECTOR('',#204503,1.); +#204503 = DIRECTION('',(1.,0.,0.)); +#204504 = ORIENTED_EDGE('',*,*,#204505,.T.); +#204505 = EDGE_CURVE('',#204498,#204506,#204508,.T.); +#204506 = VERTEX_POINT('',#204507); +#204507 = CARTESIAN_POINT('',(110.074597,-77.601058,1.585)); +#204508 = LINE('',#204509,#204510); +#204509 = CARTESIAN_POINT('',(110.074597,-77.863571,1.585)); +#204510 = VECTOR('',#204511,1.); +#204511 = DIRECTION('',(0.,1.,0.)); +#204512 = ORIENTED_EDGE('',*,*,#204513,.T.); +#204513 = EDGE_CURVE('',#204506,#204514,#204516,.T.); +#204514 = VERTEX_POINT('',#204515); +#204515 = CARTESIAN_POINT('',(110.043318,-77.538501,1.585)); +#204516 = LINE('',#204517,#204518); +#204517 = CARTESIAN_POINT('',(110.074597,-77.601058,1.585)); +#204518 = VECTOR('',#204519,1.); +#204519 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204520 = ORIENTED_EDGE('',*,*,#204521,.T.); +#204521 = EDGE_CURVE('',#204514,#204463,#204522,.T.); +#204522 = LINE('',#204523,#204524); +#204523 = CARTESIAN_POINT('',(110.043318,-77.538501,1.585)); +#204524 = VECTOR('',#204525,1.); +#204525 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204526 = PLANE('',#204527); +#204527 = AXIS2_PLACEMENT_3D('',#204528,#204529,#204530); +#204528 = CARTESIAN_POINT('',(0.,0.,1.585)); +#204529 = DIRECTION('',(0.,0.,1.)); +#204530 = DIRECTION('',(1.,0.,-0.)); +#204531 = SHELL_BASED_SURFACE_MODEL('',(#204532)); +#204532 = OPEN_SHELL('',(#204533)); +#204533 = ADVANCED_FACE('',(#204534,#204660,#204727),#204794,.T.); +#204534 = FACE_BOUND('',#204535,.F.); +#204535 = EDGE_LOOP('',(#204536,#204547,#204555,#204563,#204571,#204579, + #204588,#204596,#204605,#204613,#204622,#204630,#204638,#204646, + #204654)); +#204536 = ORIENTED_EDGE('',*,*,#204537,.T.); +#204537 = EDGE_CURVE('',#204538,#204540,#204542,.T.); +#204538 = VERTEX_POINT('',#204539); +#204539 = CARTESIAN_POINT('',(112.264813,-77.399004,1.585)); +#204540 = VERTEX_POINT('',#204541); +#204541 = CARTESIAN_POINT('',(112.537237,-77.356147,1.585)); +#204542 = CIRCLE('',#204543,0.328851911789); +#204543 = AXIS2_PLACEMENT_3D('',#204544,#204545,#204546); +#204544 = CARTESIAN_POINT('',(112.44742108589,-77.67249598681,1.585)); +#204545 = DIRECTION('',(0.,0.,-1.)); +#204546 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204547 = ORIENTED_EDGE('',*,*,#204548,.T.); +#204548 = EDGE_CURVE('',#204540,#204549,#204551,.T.); +#204549 = VERTEX_POINT('',#204550); +#204550 = CARTESIAN_POINT('',(112.639843,-77.41118,1.585)); +#204551 = LINE('',#204552,#204553); +#204552 = CARTESIAN_POINT('',(112.537237,-77.356147,1.585)); +#204553 = VECTOR('',#204554,1.); +#204554 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204555 = ORIENTED_EDGE('',*,*,#204556,.T.); +#204556 = EDGE_CURVE('',#204549,#204557,#204559,.T.); +#204557 = VERTEX_POINT('',#204558); +#204558 = CARTESIAN_POINT('',(112.694878,-77.47093,1.585)); +#204559 = LINE('',#204560,#204561); +#204560 = CARTESIAN_POINT('',(112.639843,-77.41118,1.585)); +#204561 = VECTOR('',#204562,1.); +#204562 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204563 = ORIENTED_EDGE('',*,*,#204564,.T.); +#204564 = EDGE_CURVE('',#204557,#204565,#204567,.T.); +#204565 = VERTEX_POINT('',#204566); +#204566 = CARTESIAN_POINT('',(112.741681,-77.571057,1.585)); +#204567 = LINE('',#204568,#204569); +#204568 = CARTESIAN_POINT('',(112.694878,-77.47093,1.585)); +#204569 = VECTOR('',#204570,1.); +#204570 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204571 = ORIENTED_EDGE('',*,*,#204572,.T.); +#204572 = EDGE_CURVE('',#204565,#204573,#204575,.T.); +#204573 = VERTEX_POINT('',#204574); +#204574 = CARTESIAN_POINT('',(112.744597,-77.928571,1.585)); +#204575 = LINE('',#204576,#204577); +#204576 = CARTESIAN_POINT('',(112.741681,-77.571057,1.585)); +#204577 = VECTOR('',#204578,1.); +#204578 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#204579 = ORIENTED_EDGE('',*,*,#204580,.T.); +#204580 = EDGE_CURVE('',#204573,#204581,#204583,.T.); +#204581 = VERTEX_POINT('',#204582); +#204582 = CARTESIAN_POINT('',(112.679597,-77.993571,1.585)); +#204583 = CIRCLE('',#204584,6.500103935389E-02); +#204584 = AXIS2_PLACEMENT_3D('',#204585,#204586,#204587); +#204585 = CARTESIAN_POINT('',(112.67959596065,-77.92856996065,1.585)); +#204586 = DIRECTION('',(0.,0.,-1.)); +#204587 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#204588 = ORIENTED_EDGE('',*,*,#204589,.T.); +#204589 = EDGE_CURVE('',#204581,#204590,#204592,.T.); +#204590 = VERTEX_POINT('',#204591); +#204591 = CARTESIAN_POINT('',(111.779597,-77.993571,1.585)); +#204592 = LINE('',#204593,#204594); +#204593 = CARTESIAN_POINT('',(112.679597,-77.993571,1.585)); +#204594 = VECTOR('',#204595,1.); +#204595 = DIRECTION('',(-1.,0.,0.)); +#204596 = ORIENTED_EDGE('',*,*,#204597,.T.); +#204597 = EDGE_CURVE('',#204590,#204598,#204600,.T.); +#204598 = VERTEX_POINT('',#204599); +#204599 = CARTESIAN_POINT('',(111.714597,-77.928571,1.585)); +#204600 = CIRCLE('',#204601,6.500103935389E-02); +#204601 = AXIS2_PLACEMENT_3D('',#204602,#204603,#204604); +#204602 = CARTESIAN_POINT('',(111.77959803934,-77.92856996065,1.585)); +#204603 = DIRECTION('',(0.,0.,-1.)); +#204604 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#204605 = ORIENTED_EDGE('',*,*,#204606,.T.); +#204606 = EDGE_CURVE('',#204598,#204607,#204609,.T.); +#204607 = VERTEX_POINT('',#204608); +#204608 = CARTESIAN_POINT('',(111.717512,-77.613914,1.585)); +#204609 = LINE('',#204610,#204611); +#204610 = CARTESIAN_POINT('',(111.714597,-77.928571,1.585)); +#204611 = VECTOR('',#204612,1.); +#204612 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#204613 = ORIENTED_EDGE('',*,*,#204614,.T.); +#204614 = EDGE_CURVE('',#204607,#204615,#204617,.T.); +#204615 = VERTEX_POINT('',#204616); +#204616 = CARTESIAN_POINT('',(111.936368,-77.395057,1.585)); +#204617 = CIRCLE('',#204618,0.308109459502); +#204618 = AXIS2_PLACEMENT_3D('',#204619,#204620,#204621); +#204619 = CARTESIAN_POINT('',(112.01533145359,-77.69287609279,1.585)); +#204620 = DIRECTION('',(0.,0.,-1.)); +#204621 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204622 = ORIENTED_EDGE('',*,*,#204623,.T.); +#204623 = EDGE_CURVE('',#204615,#204624,#204626,.T.); +#204624 = VERTEX_POINT('',#204625); +#204625 = CARTESIAN_POINT('',(112.051396,-77.395057,1.585)); +#204626 = LINE('',#204627,#204628); +#204627 = CARTESIAN_POINT('',(111.936368,-77.395057,1.585)); +#204628 = VECTOR('',#204629,1.); +#204629 = DIRECTION('',(1.,0.,0.)); +#204630 = ORIENTED_EDGE('',*,*,#204631,.T.); +#204631 = EDGE_CURVE('',#204624,#204632,#204634,.T.); +#204632 = VERTEX_POINT('',#204633); +#204633 = CARTESIAN_POINT('',(112.159761,-77.448254,1.585)); +#204634 = LINE('',#204635,#204636); +#204635 = CARTESIAN_POINT('',(112.051396,-77.395057,1.585)); +#204636 = VECTOR('',#204637,1.); +#204637 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204638 = ORIENTED_EDGE('',*,*,#204639,.T.); +#204639 = EDGE_CURVE('',#204632,#204640,#204642,.T.); +#204640 = VERTEX_POINT('',#204641); +#204641 = CARTESIAN_POINT('',(112.190973,-77.475124,1.585)); +#204642 = LINE('',#204643,#204644); +#204643 = CARTESIAN_POINT('',(112.159761,-77.448254,1.585)); +#204644 = VECTOR('',#204645,1.); +#204645 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204646 = ORIENTED_EDGE('',*,*,#204647,.T.); +#204647 = EDGE_CURVE('',#204640,#204648,#204650,.T.); +#204648 = VERTEX_POINT('',#204649); +#204649 = CARTESIAN_POINT('',(112.205063,-77.454037,1.585)); +#204650 = LINE('',#204651,#204652); +#204651 = CARTESIAN_POINT('',(112.190973,-77.475124,1.585)); +#204652 = VECTOR('',#204653,1.); +#204653 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204654 = ORIENTED_EDGE('',*,*,#204655,.T.); +#204655 = EDGE_CURVE('',#204648,#204538,#204656,.T.); +#204656 = LINE('',#204657,#204658); +#204657 = CARTESIAN_POINT('',(112.205063,-77.454037,1.585)); +#204658 = VECTOR('',#204659,1.); +#204659 = DIRECTION('',(0.73554445943,0.677476455829,0.)); +#204660 = FACE_BOUND('',#204661,.F.); +#204661 = EDGE_LOOP('',(#204662,#204673,#204681,#204689,#204697,#204705, + #204713,#204721)); +#204662 = ORIENTED_EDGE('',*,*,#204663,.T.); +#204663 = EDGE_CURVE('',#204664,#204666,#204668,.T.); +#204664 = VERTEX_POINT('',#204665); +#204665 = CARTESIAN_POINT('',(112.083952,-77.55342,1.585)); +#204666 = VERTEX_POINT('',#204667); +#204667 = CARTESIAN_POINT('',(111.903814,-77.55342,1.585)); +#204668 = CIRCLE('',#204669,0.136032349131); +#204669 = AXIS2_PLACEMENT_3D('',#204670,#204671,#204672); +#204670 = CARTESIAN_POINT('',(111.993883,-77.655363,1.585)); +#204671 = DIRECTION('',(0.,0.,1.)); +#204672 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204673 = ORIENTED_EDGE('',*,*,#204674,.T.); +#204674 = EDGE_CURVE('',#204666,#204675,#204677,.T.); +#204675 = VERTEX_POINT('',#204676); +#204676 = CARTESIAN_POINT('',(111.875876,-77.581358,1.585)); +#204677 = LINE('',#204678,#204679); +#204678 = CARTESIAN_POINT('',(111.903814,-77.55342,1.585)); +#204679 = VECTOR('',#204680,1.); +#204680 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204681 = ORIENTED_EDGE('',*,*,#204682,.T.); +#204682 = EDGE_CURVE('',#204675,#204683,#204685,.T.); +#204683 = VERTEX_POINT('',#204684); +#204684 = CARTESIAN_POINT('',(111.844597,-77.643916,1.585)); +#204685 = LINE('',#204686,#204687); +#204686 = CARTESIAN_POINT('',(111.875876,-77.581358,1.585)); +#204687 = VECTOR('',#204688,1.); +#204688 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204689 = ORIENTED_EDGE('',*,*,#204690,.T.); +#204690 = EDGE_CURVE('',#204683,#204691,#204693,.T.); +#204691 = VERTEX_POINT('',#204692); +#204692 = CARTESIAN_POINT('',(111.844597,-77.863571,1.585)); +#204693 = LINE('',#204694,#204695); +#204694 = CARTESIAN_POINT('',(111.844597,-77.643916,1.585)); +#204695 = VECTOR('',#204696,1.); +#204696 = DIRECTION('',(0.,-1.,0.)); +#204697 = ORIENTED_EDGE('',*,*,#204698,.T.); +#204698 = EDGE_CURVE('',#204691,#204699,#204701,.T.); +#204699 = VERTEX_POINT('',#204700); +#204700 = CARTESIAN_POINT('',(112.143168,-77.863571,1.585)); +#204701 = LINE('',#204702,#204703); +#204702 = CARTESIAN_POINT('',(111.844597,-77.863571,1.585)); +#204703 = VECTOR('',#204704,1.); +#204704 = DIRECTION('',(1.,0.,0.)); +#204705 = ORIENTED_EDGE('',*,*,#204706,.T.); +#204706 = EDGE_CURVE('',#204699,#204707,#204709,.T.); +#204707 = VERTEX_POINT('',#204708); +#204708 = CARTESIAN_POINT('',(112.143168,-77.643916,1.585)); +#204709 = LINE('',#204710,#204711); +#204710 = CARTESIAN_POINT('',(112.143168,-77.863571,1.585)); +#204711 = VECTOR('',#204712,1.); +#204712 = DIRECTION('',(0.,1.,0.)); +#204713 = ORIENTED_EDGE('',*,*,#204714,.T.); +#204714 = EDGE_CURVE('',#204707,#204715,#204717,.T.); +#204715 = VERTEX_POINT('',#204716); +#204716 = CARTESIAN_POINT('',(112.111889,-77.581359,1.585)); +#204717 = LINE('',#204718,#204719); +#204718 = CARTESIAN_POINT('',(112.143168,-77.643916,1.585)); +#204719 = VECTOR('',#204720,1.); +#204720 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204721 = ORIENTED_EDGE('',*,*,#204722,.T.); +#204722 = EDGE_CURVE('',#204715,#204664,#204723,.T.); +#204723 = LINE('',#204724,#204725); +#204724 = CARTESIAN_POINT('',(112.111889,-77.581359,1.585)); +#204725 = VECTOR('',#204726,1.); +#204726 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#204727 = FACE_BOUND('',#204728,.F.); +#204728 = EDGE_LOOP('',(#204729,#204740,#204748,#204756,#204764,#204772, + #204780,#204788)); +#204729 = ORIENTED_EDGE('',*,*,#204730,.T.); +#204730 = EDGE_CURVE('',#204731,#204733,#204735,.T.); +#204731 = VERTEX_POINT('',#204732); +#204732 = CARTESIAN_POINT('',(112.555381,-77.510564,1.585)); +#204733 = VERTEX_POINT('',#204734); +#204734 = CARTESIAN_POINT('',(112.332384,-77.510563,1.585)); +#204735 = CIRCLE('',#204736,0.182756450193); +#204736 = AXIS2_PLACEMENT_3D('',#204737,#204738,#204739); +#204737 = CARTESIAN_POINT('',(112.44388185064,-77.6553668307,1.585)); +#204738 = DIRECTION('',(0.,0.,1.)); +#204739 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#204740 = ORIENTED_EDGE('',*,*,#204741,.T.); +#204741 = EDGE_CURVE('',#204733,#204742,#204744,.T.); +#204742 = VERTEX_POINT('',#204743); +#204743 = CARTESIAN_POINT('',(112.307837,-77.53511,1.585)); +#204744 = LINE('',#204745,#204746); +#204745 = CARTESIAN_POINT('',(112.332384,-77.510563,1.585)); +#204746 = VECTOR('',#204747,1.); +#204747 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204748 = ORIENTED_EDGE('',*,*,#204749,.T.); +#204749 = EDGE_CURVE('',#204742,#204750,#204752,.T.); +#204750 = VERTEX_POINT('',#204751); +#204751 = CARTESIAN_POINT('',(112.273168,-77.639118,1.585)); +#204752 = LINE('',#204753,#204754); +#204753 = CARTESIAN_POINT('',(112.307837,-77.53511,1.585)); +#204754 = VECTOR('',#204755,1.); +#204755 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#204756 = ORIENTED_EDGE('',*,*,#204757,.T.); +#204757 = EDGE_CURVE('',#204750,#204758,#204760,.T.); +#204758 = VERTEX_POINT('',#204759); +#204759 = CARTESIAN_POINT('',(112.273168,-77.863571,1.585)); +#204760 = LINE('',#204761,#204762); +#204761 = CARTESIAN_POINT('',(112.273168,-77.639118,1.585)); +#204762 = VECTOR('',#204763,1.); +#204763 = DIRECTION('',(0.,-1.,0.)); +#204764 = ORIENTED_EDGE('',*,*,#204765,.T.); +#204765 = EDGE_CURVE('',#204758,#204766,#204768,.T.); +#204766 = VERTEX_POINT('',#204767); +#204767 = CARTESIAN_POINT('',(112.614597,-77.863571,1.585)); +#204768 = LINE('',#204769,#204770); +#204769 = CARTESIAN_POINT('',(112.273168,-77.863571,1.585)); +#204770 = VECTOR('',#204771,1.); +#204771 = DIRECTION('',(1.,0.,0.)); +#204772 = ORIENTED_EDGE('',*,*,#204773,.T.); +#204773 = EDGE_CURVE('',#204766,#204774,#204776,.T.); +#204774 = VERTEX_POINT('',#204775); +#204775 = CARTESIAN_POINT('',(112.614597,-77.601058,1.585)); +#204776 = LINE('',#204777,#204778); +#204777 = CARTESIAN_POINT('',(112.614597,-77.863571,1.585)); +#204778 = VECTOR('',#204779,1.); +#204779 = DIRECTION('',(0.,1.,0.)); +#204780 = ORIENTED_EDGE('',*,*,#204781,.T.); +#204781 = EDGE_CURVE('',#204774,#204782,#204784,.T.); +#204782 = VERTEX_POINT('',#204783); +#204783 = CARTESIAN_POINT('',(112.583318,-77.538501,1.585)); +#204784 = LINE('',#204785,#204786); +#204785 = CARTESIAN_POINT('',(112.614597,-77.601058,1.585)); +#204786 = VECTOR('',#204787,1.); +#204787 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204788 = ORIENTED_EDGE('',*,*,#204789,.T.); +#204789 = EDGE_CURVE('',#204782,#204731,#204790,.T.); +#204790 = LINE('',#204791,#204792); +#204791 = CARTESIAN_POINT('',(112.583318,-77.538501,1.585)); +#204792 = VECTOR('',#204793,1.); +#204793 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#204794 = PLANE('',#204795); +#204795 = AXIS2_PLACEMENT_3D('',#204796,#204797,#204798); +#204796 = CARTESIAN_POINT('',(0.,0.,1.585)); +#204797 = DIRECTION('',(0.,0.,1.)); +#204798 = DIRECTION('',(1.,0.,-0.)); +#204799 = SHELL_BASED_SURFACE_MODEL('',(#204800)); +#204800 = OPEN_SHELL('',(#204801)); +#204801 = ADVANCED_FACE('',(#204802,#204928,#204995),#205062,.T.); +#204802 = FACE_BOUND('',#204803,.F.); +#204803 = EDGE_LOOP('',(#204804,#204815,#204823,#204831,#204839,#204847, + #204856,#204864,#204873,#204881,#204890,#204898,#204906,#204914, + #204922)); +#204804 = ORIENTED_EDGE('',*,*,#204805,.T.); +#204805 = EDGE_CURVE('',#204806,#204808,#204810,.T.); +#204806 = VERTEX_POINT('',#204807); +#204807 = CARTESIAN_POINT('',(114.804813,-77.399004,1.585)); +#204808 = VERTEX_POINT('',#204809); +#204809 = CARTESIAN_POINT('',(115.077237,-77.356147,1.585)); +#204810 = CIRCLE('',#204811,0.328851911788); +#204811 = AXIS2_PLACEMENT_3D('',#204812,#204813,#204814); +#204812 = CARTESIAN_POINT('',(114.98742108589,-77.67249598681,1.585)); +#204813 = DIRECTION('',(0.,0.,-1.)); +#204814 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204815 = ORIENTED_EDGE('',*,*,#204816,.T.); +#204816 = EDGE_CURVE('',#204808,#204817,#204819,.T.); +#204817 = VERTEX_POINT('',#204818); +#204818 = CARTESIAN_POINT('',(115.179843,-77.41118,1.585)); +#204819 = LINE('',#204820,#204821); +#204820 = CARTESIAN_POINT('',(115.077237,-77.356147,1.585)); +#204821 = VECTOR('',#204822,1.); +#204822 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204823 = ORIENTED_EDGE('',*,*,#204824,.T.); +#204824 = EDGE_CURVE('',#204817,#204825,#204827,.T.); +#204825 = VERTEX_POINT('',#204826); +#204826 = CARTESIAN_POINT('',(115.234878,-77.47093,1.585)); +#204827 = LINE('',#204828,#204829); +#204828 = CARTESIAN_POINT('',(115.179843,-77.41118,1.585)); +#204829 = VECTOR('',#204830,1.); +#204830 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204831 = ORIENTED_EDGE('',*,*,#204832,.T.); +#204832 = EDGE_CURVE('',#204825,#204833,#204835,.T.); +#204833 = VERTEX_POINT('',#204834); +#204834 = CARTESIAN_POINT('',(115.281681,-77.571057,1.585)); +#204835 = LINE('',#204836,#204837); +#204836 = CARTESIAN_POINT('',(115.234878,-77.47093,1.585)); +#204837 = VECTOR('',#204838,1.); +#204838 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204839 = ORIENTED_EDGE('',*,*,#204840,.T.); +#204840 = EDGE_CURVE('',#204833,#204841,#204843,.T.); +#204841 = VERTEX_POINT('',#204842); +#204842 = CARTESIAN_POINT('',(115.284597,-77.928571,1.585)); +#204843 = LINE('',#204844,#204845); +#204844 = CARTESIAN_POINT('',(115.281681,-77.571057,1.585)); +#204845 = VECTOR('',#204846,1.); +#204846 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#204847 = ORIENTED_EDGE('',*,*,#204848,.T.); +#204848 = EDGE_CURVE('',#204841,#204849,#204851,.T.); +#204849 = VERTEX_POINT('',#204850); +#204850 = CARTESIAN_POINT('',(115.219597,-77.993571,1.585)); +#204851 = CIRCLE('',#204852,6.500103935388E-02); +#204852 = AXIS2_PLACEMENT_3D('',#204853,#204854,#204855); +#204853 = CARTESIAN_POINT('',(115.21959596065,-77.92856996065,1.585)); +#204854 = DIRECTION('',(0.,0.,-1.)); +#204855 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#204856 = ORIENTED_EDGE('',*,*,#204857,.T.); +#204857 = EDGE_CURVE('',#204849,#204858,#204860,.T.); +#204858 = VERTEX_POINT('',#204859); +#204859 = CARTESIAN_POINT('',(114.319597,-77.993571,1.585)); +#204860 = LINE('',#204861,#204862); +#204861 = CARTESIAN_POINT('',(115.219597,-77.993571,1.585)); +#204862 = VECTOR('',#204863,1.); +#204863 = DIRECTION('',(-1.,0.,0.)); +#204864 = ORIENTED_EDGE('',*,*,#204865,.T.); +#204865 = EDGE_CURVE('',#204858,#204866,#204868,.T.); +#204866 = VERTEX_POINT('',#204867); +#204867 = CARTESIAN_POINT('',(114.254597,-77.928571,1.585)); +#204868 = CIRCLE('',#204869,6.50010393539E-02); +#204869 = AXIS2_PLACEMENT_3D('',#204870,#204871,#204872); +#204870 = CARTESIAN_POINT('',(114.31959803934,-77.92856996065,1.585)); +#204871 = DIRECTION('',(0.,0.,-1.)); +#204872 = DIRECTION('',(-1.598967649219E-05,-0.999999999872,-0.)); +#204873 = ORIENTED_EDGE('',*,*,#204874,.T.); +#204874 = EDGE_CURVE('',#204866,#204875,#204877,.T.); +#204875 = VERTEX_POINT('',#204876); +#204876 = CARTESIAN_POINT('',(114.257512,-77.613914,1.585)); +#204877 = LINE('',#204878,#204879); +#204878 = CARTESIAN_POINT('',(114.254597,-77.928571,1.585)); +#204879 = VECTOR('',#204880,1.); +#204880 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#204881 = ORIENTED_EDGE('',*,*,#204882,.T.); +#204882 = EDGE_CURVE('',#204875,#204883,#204885,.T.); +#204883 = VERTEX_POINT('',#204884); +#204884 = CARTESIAN_POINT('',(114.476368,-77.395057,1.585)); +#204885 = CIRCLE('',#204886,0.308109459502); +#204886 = AXIS2_PLACEMENT_3D('',#204887,#204888,#204889); +#204887 = CARTESIAN_POINT('',(114.55533145359,-77.69287609279,1.585)); +#204888 = DIRECTION('',(0.,0.,-1.)); +#204889 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204890 = ORIENTED_EDGE('',*,*,#204891,.T.); +#204891 = EDGE_CURVE('',#204883,#204892,#204894,.T.); +#204892 = VERTEX_POINT('',#204893); +#204893 = CARTESIAN_POINT('',(114.591396,-77.395057,1.585)); +#204894 = LINE('',#204895,#204896); +#204895 = CARTESIAN_POINT('',(114.476368,-77.395057,1.585)); +#204896 = VECTOR('',#204897,1.); +#204897 = DIRECTION('',(1.,0.,0.)); +#204898 = ORIENTED_EDGE('',*,*,#204899,.T.); +#204899 = EDGE_CURVE('',#204892,#204900,#204902,.T.); +#204900 = VERTEX_POINT('',#204901); +#204901 = CARTESIAN_POINT('',(114.699761,-77.448254,1.585)); +#204902 = LINE('',#204903,#204904); +#204903 = CARTESIAN_POINT('',(114.591396,-77.395057,1.585)); +#204904 = VECTOR('',#204905,1.); +#204905 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204906 = ORIENTED_EDGE('',*,*,#204907,.T.); +#204907 = EDGE_CURVE('',#204900,#204908,#204910,.T.); +#204908 = VERTEX_POINT('',#204909); +#204909 = CARTESIAN_POINT('',(114.730973,-77.475124,1.585)); +#204910 = LINE('',#204911,#204912); +#204911 = CARTESIAN_POINT('',(114.699761,-77.448254,1.585)); +#204912 = VECTOR('',#204913,1.); +#204913 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204914 = ORIENTED_EDGE('',*,*,#204915,.T.); +#204915 = EDGE_CURVE('',#204908,#204916,#204918,.T.); +#204916 = VERTEX_POINT('',#204917); +#204917 = CARTESIAN_POINT('',(114.745063,-77.454037,1.585)); +#204918 = LINE('',#204919,#204920); +#204919 = CARTESIAN_POINT('',(114.730973,-77.475124,1.585)); +#204920 = VECTOR('',#204921,1.); +#204921 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204922 = ORIENTED_EDGE('',*,*,#204923,.T.); +#204923 = EDGE_CURVE('',#204916,#204806,#204924,.T.); +#204924 = LINE('',#204925,#204926); +#204925 = CARTESIAN_POINT('',(114.745063,-77.454037,1.585)); +#204926 = VECTOR('',#204927,1.); +#204927 = DIRECTION('',(0.735544459429,0.677476455829,0.)); +#204928 = FACE_BOUND('',#204929,.F.); +#204929 = EDGE_LOOP('',(#204930,#204941,#204949,#204957,#204965,#204973, + #204981,#204989)); +#204930 = ORIENTED_EDGE('',*,*,#204931,.T.); +#204931 = EDGE_CURVE('',#204932,#204934,#204936,.T.); +#204932 = VERTEX_POINT('',#204933); +#204933 = CARTESIAN_POINT('',(114.623952,-77.55342,1.585)); +#204934 = VERTEX_POINT('',#204935); +#204935 = CARTESIAN_POINT('',(114.443814,-77.55342,1.585)); +#204936 = CIRCLE('',#204937,0.136032349131); +#204937 = AXIS2_PLACEMENT_3D('',#204938,#204939,#204940); +#204938 = CARTESIAN_POINT('',(114.533883,-77.655363,1.585)); +#204939 = DIRECTION('',(0.,0.,1.)); +#204940 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204941 = ORIENTED_EDGE('',*,*,#204942,.T.); +#204942 = EDGE_CURVE('',#204934,#204943,#204945,.T.); +#204943 = VERTEX_POINT('',#204944); +#204944 = CARTESIAN_POINT('',(114.415876,-77.581358,1.585)); +#204945 = LINE('',#204946,#204947); +#204946 = CARTESIAN_POINT('',(114.443814,-77.55342,1.585)); +#204947 = VECTOR('',#204948,1.); +#204948 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#204949 = ORIENTED_EDGE('',*,*,#204950,.T.); +#204950 = EDGE_CURVE('',#204943,#204951,#204953,.T.); +#204951 = VERTEX_POINT('',#204952); +#204952 = CARTESIAN_POINT('',(114.384597,-77.643916,1.585)); +#204953 = LINE('',#204954,#204955); +#204954 = CARTESIAN_POINT('',(114.415876,-77.581358,1.585)); +#204955 = VECTOR('',#204956,1.); +#204956 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204957 = ORIENTED_EDGE('',*,*,#204958,.T.); +#204958 = EDGE_CURVE('',#204951,#204959,#204961,.T.); +#204959 = VERTEX_POINT('',#204960); +#204960 = CARTESIAN_POINT('',(114.384597,-77.863571,1.585)); +#204961 = LINE('',#204962,#204963); +#204962 = CARTESIAN_POINT('',(114.384597,-77.643916,1.585)); +#204963 = VECTOR('',#204964,1.); +#204964 = DIRECTION('',(0.,-1.,0.)); +#204965 = ORIENTED_EDGE('',*,*,#204966,.T.); +#204966 = EDGE_CURVE('',#204959,#204967,#204969,.T.); +#204967 = VERTEX_POINT('',#204968); +#204968 = CARTESIAN_POINT('',(114.683168,-77.863571,1.585)); +#204969 = LINE('',#204970,#204971); +#204970 = CARTESIAN_POINT('',(114.384597,-77.863571,1.585)); +#204971 = VECTOR('',#204972,1.); +#204972 = DIRECTION('',(1.,0.,0.)); +#204973 = ORIENTED_EDGE('',*,*,#204974,.T.); +#204974 = EDGE_CURVE('',#204967,#204975,#204977,.T.); +#204975 = VERTEX_POINT('',#204976); +#204976 = CARTESIAN_POINT('',(114.683168,-77.643916,1.585)); +#204977 = LINE('',#204978,#204979); +#204978 = CARTESIAN_POINT('',(114.683168,-77.863571,1.585)); +#204979 = VECTOR('',#204980,1.); +#204980 = DIRECTION('',(0.,1.,0.)); +#204981 = ORIENTED_EDGE('',*,*,#204982,.T.); +#204982 = EDGE_CURVE('',#204975,#204983,#204985,.T.); +#204983 = VERTEX_POINT('',#204984); +#204984 = CARTESIAN_POINT('',(114.651889,-77.581359,1.585)); +#204985 = LINE('',#204986,#204987); +#204986 = CARTESIAN_POINT('',(114.683168,-77.643916,1.585)); +#204987 = VECTOR('',#204988,1.); +#204988 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204989 = ORIENTED_EDGE('',*,*,#204990,.T.); +#204990 = EDGE_CURVE('',#204983,#204932,#204991,.T.); +#204991 = LINE('',#204992,#204993); +#204992 = CARTESIAN_POINT('',(114.651889,-77.581359,1.585)); +#204993 = VECTOR('',#204994,1.); +#204994 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#204995 = FACE_BOUND('',#204996,.F.); +#204996 = EDGE_LOOP('',(#204997,#205008,#205016,#205024,#205032,#205040, + #205048,#205056)); +#204997 = ORIENTED_EDGE('',*,*,#204998,.T.); +#204998 = EDGE_CURVE('',#204999,#205001,#205003,.T.); +#204999 = VERTEX_POINT('',#205000); +#205000 = CARTESIAN_POINT('',(115.095381,-77.510564,1.585)); +#205001 = VERTEX_POINT('',#205002); +#205002 = CARTESIAN_POINT('',(114.872384,-77.510563,1.585)); +#205003 = CIRCLE('',#205004,0.182756450193); +#205004 = AXIS2_PLACEMENT_3D('',#205005,#205006,#205007); +#205005 = CARTESIAN_POINT('',(114.98388185064,-77.6553668307,1.585)); +#205006 = DIRECTION('',(0.,0.,1.)); +#205007 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#205008 = ORIENTED_EDGE('',*,*,#205009,.T.); +#205009 = EDGE_CURVE('',#205001,#205010,#205012,.T.); +#205010 = VERTEX_POINT('',#205011); +#205011 = CARTESIAN_POINT('',(114.847837,-77.53511,1.585)); +#205012 = LINE('',#205013,#205014); +#205013 = CARTESIAN_POINT('',(114.872384,-77.510563,1.585)); +#205014 = VECTOR('',#205015,1.); +#205015 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#205016 = ORIENTED_EDGE('',*,*,#205017,.T.); +#205017 = EDGE_CURVE('',#205010,#205018,#205020,.T.); +#205018 = VERTEX_POINT('',#205019); +#205019 = CARTESIAN_POINT('',(114.813168,-77.639118,1.585)); +#205020 = LINE('',#205021,#205022); +#205021 = CARTESIAN_POINT('',(114.847837,-77.53511,1.585)); +#205022 = VECTOR('',#205023,1.); +#205023 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#205024 = ORIENTED_EDGE('',*,*,#205025,.T.); +#205025 = EDGE_CURVE('',#205018,#205026,#205028,.T.); +#205026 = VERTEX_POINT('',#205027); +#205027 = CARTESIAN_POINT('',(114.813168,-77.863571,1.585)); +#205028 = LINE('',#205029,#205030); +#205029 = CARTESIAN_POINT('',(114.813168,-77.639118,1.585)); +#205030 = VECTOR('',#205031,1.); +#205031 = DIRECTION('',(0.,-1.,0.)); +#205032 = ORIENTED_EDGE('',*,*,#205033,.T.); +#205033 = EDGE_CURVE('',#205026,#205034,#205036,.T.); +#205034 = VERTEX_POINT('',#205035); +#205035 = CARTESIAN_POINT('',(115.154597,-77.863571,1.585)); +#205036 = LINE('',#205037,#205038); +#205037 = CARTESIAN_POINT('',(114.813168,-77.863571,1.585)); +#205038 = VECTOR('',#205039,1.); +#205039 = DIRECTION('',(1.,0.,0.)); +#205040 = ORIENTED_EDGE('',*,*,#205041,.T.); +#205041 = EDGE_CURVE('',#205034,#205042,#205044,.T.); +#205042 = VERTEX_POINT('',#205043); +#205043 = CARTESIAN_POINT('',(115.154597,-77.601058,1.585)); +#205044 = LINE('',#205045,#205046); +#205045 = CARTESIAN_POINT('',(115.154597,-77.863571,1.585)); +#205046 = VECTOR('',#205047,1.); +#205047 = DIRECTION('',(0.,1.,0.)); +#205048 = ORIENTED_EDGE('',*,*,#205049,.T.); +#205049 = EDGE_CURVE('',#205042,#205050,#205052,.T.); +#205050 = VERTEX_POINT('',#205051); +#205051 = CARTESIAN_POINT('',(115.123318,-77.538501,1.585)); +#205052 = LINE('',#205053,#205054); +#205053 = CARTESIAN_POINT('',(115.154597,-77.601058,1.585)); +#205054 = VECTOR('',#205055,1.); +#205055 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#205056 = ORIENTED_EDGE('',*,*,#205057,.T.); +#205057 = EDGE_CURVE('',#205050,#204999,#205058,.T.); +#205058 = LINE('',#205059,#205060); +#205059 = CARTESIAN_POINT('',(115.123318,-77.538501,1.585)); +#205060 = VECTOR('',#205061,1.); +#205061 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#205062 = PLANE('',#205063); +#205063 = AXIS2_PLACEMENT_3D('',#205064,#205065,#205066); +#205064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205065 = DIRECTION('',(0.,0.,1.)); +#205066 = DIRECTION('',(1.,0.,-0.)); +#205067 = SHELL_BASED_SURFACE_MODEL('',(#205068)); +#205068 = OPEN_SHELL('',(#205069)); +#205069 = ADVANCED_FACE('',(#205070),#205172,.T.); +#205070 = FACE_BOUND('',#205071,.F.); +#205071 = EDGE_LOOP('',(#205072,#205083,#205091,#205099,#205107,#205116, + #205124,#205132,#205141,#205149,#205158,#205166)); +#205072 = ORIENTED_EDGE('',*,*,#205073,.T.); +#205073 = EDGE_CURVE('',#205074,#205076,#205078,.T.); +#205074 = VERTEX_POINT('',#205075); +#205075 = CARTESIAN_POINT('',(134.549545,-77.425125,1.585)); +#205076 = VERTEX_POINT('',#205077); +#205077 = CARTESIAN_POINT('',(134.674597,-77.449999,1.585)); +#205078 = CIRCLE('',#205079,6.499988811649E-02); +#205079 = AXIS2_PLACEMENT_3D('',#205080,#205081,#205082); +#205080 = CARTESIAN_POINT('',(134.60959711188,-77.4499992701,1.585)); +#205081 = DIRECTION('',(0.,0.,-1.)); +#205082 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#205083 = ORIENTED_EDGE('',*,*,#205084,.T.); +#205084 = EDGE_CURVE('',#205076,#205085,#205087,.T.); +#205085 = VERTEX_POINT('',#205086); +#205086 = CARTESIAN_POINT('',(134.674597,-77.813571,1.585)); +#205087 = LINE('',#205088,#205089); +#205088 = CARTESIAN_POINT('',(134.674597,-77.449999,1.585)); +#205089 = VECTOR('',#205090,1.); +#205090 = DIRECTION('',(0.,-1.,0.)); +#205091 = ORIENTED_EDGE('',*,*,#205092,.T.); +#205092 = EDGE_CURVE('',#205085,#205093,#205095,.T.); +#205093 = VERTEX_POINT('',#205094); +#205094 = CARTESIAN_POINT('',(134.973168,-77.813571,1.585)); +#205095 = LINE('',#205096,#205097); +#205096 = CARTESIAN_POINT('',(134.674597,-77.813571,1.585)); +#205097 = VECTOR('',#205098,1.); +#205098 = DIRECTION('',(1.,0.,0.)); +#205099 = ORIENTED_EDGE('',*,*,#205100,.T.); +#205100 = EDGE_CURVE('',#205093,#205101,#205103,.T.); +#205101 = VERTEX_POINT('',#205102); +#205102 = CARTESIAN_POINT('',(134.973168,-77.578571,1.585)); +#205103 = LINE('',#205104,#205105); +#205104 = CARTESIAN_POINT('',(134.973168,-77.813571,1.585)); +#205105 = VECTOR('',#205106,1.); +#205106 = DIRECTION('',(0.,1.,0.)); +#205107 = ORIENTED_EDGE('',*,*,#205108,.T.); +#205108 = EDGE_CURVE('',#205101,#205109,#205111,.T.); +#205109 = VERTEX_POINT('',#205110); +#205110 = CARTESIAN_POINT('',(135.103168,-77.578571,1.585)); +#205111 = CIRCLE('',#205112,6.500000000093E-02); +#205112 = AXIS2_PLACEMENT_3D('',#205113,#205114,#205115); +#205113 = CARTESIAN_POINT('',(135.038168,-77.57857134486,1.585)); +#205114 = DIRECTION('',(0.,0.,-1.)); +#205115 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#205116 = ORIENTED_EDGE('',*,*,#205117,.T.); +#205117 = EDGE_CURVE('',#205109,#205118,#205120,.T.); +#205118 = VERTEX_POINT('',#205119); +#205119 = CARTESIAN_POINT('',(135.103168,-77.813571,1.585)); +#205120 = LINE('',#205121,#205122); +#205121 = CARTESIAN_POINT('',(135.103168,-77.578571,1.585)); +#205122 = VECTOR('',#205123,1.); +#205123 = DIRECTION('',(0.,-1.,0.)); +#205124 = ORIENTED_EDGE('',*,*,#205125,.T.); +#205125 = EDGE_CURVE('',#205118,#205126,#205128,.T.); +#205126 = VERTEX_POINT('',#205127); +#205127 = CARTESIAN_POINT('',(135.509597,-77.813571,1.585)); +#205128 = LINE('',#205129,#205130); +#205129 = CARTESIAN_POINT('',(135.103168,-77.813571,1.585)); +#205130 = VECTOR('',#205131,1.); +#205131 = DIRECTION('',(1.,0.,0.)); +#205132 = ORIENTED_EDGE('',*,*,#205133,.T.); +#205133 = EDGE_CURVE('',#205126,#205134,#205136,.T.); +#205134 = VERTEX_POINT('',#205135); +#205135 = CARTESIAN_POINT('',(135.509597,-77.943571,1.585)); +#205136 = CIRCLE('',#205137,6.500000000092E-02); +#205137 = AXIS2_PLACEMENT_3D('',#205138,#205139,#205140); +#205138 = CARTESIAN_POINT('',(135.50959665513,-77.878571,1.585)); +#205139 = DIRECTION('',(0.,0.,-1.)); +#205140 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#205141 = ORIENTED_EDGE('',*,*,#205142,.T.); +#205142 = EDGE_CURVE('',#205134,#205143,#205145,.T.); +#205143 = VERTEX_POINT('',#205144); +#205144 = CARTESIAN_POINT('',(134.609597,-77.943571,1.585)); +#205145 = LINE('',#205146,#205147); +#205146 = CARTESIAN_POINT('',(135.509597,-77.943571,1.585)); +#205147 = VECTOR('',#205148,1.); +#205148 = DIRECTION('',(-1.,0.,0.)); +#205149 = ORIENTED_EDGE('',*,*,#205150,.T.); +#205150 = EDGE_CURVE('',#205143,#205151,#205153,.T.); +#205151 = VERTEX_POINT('',#205152); +#205152 = CARTESIAN_POINT('',(134.544597,-77.878571,1.585)); +#205153 = CIRCLE('',#205154,6.500103935387E-02); +#205154 = AXIS2_PLACEMENT_3D('',#205155,#205156,#205157); +#205155 = CARTESIAN_POINT('',(134.60959803934,-77.87856996065,1.585)); +#205156 = DIRECTION('',(0.,0.,-1.)); +#205157 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#205158 = ORIENTED_EDGE('',*,*,#205159,.T.); +#205159 = EDGE_CURVE('',#205151,#205160,#205162,.T.); +#205160 = VERTEX_POINT('',#205161); +#205161 = CARTESIAN_POINT('',(134.544597,-77.449999,1.585)); +#205162 = LINE('',#205163,#205164); +#205163 = CARTESIAN_POINT('',(134.544597,-77.878571,1.585)); +#205164 = VECTOR('',#205165,1.); +#205165 = DIRECTION('',(0.,1.,0.)); +#205166 = ORIENTED_EDGE('',*,*,#205167,.T.); +#205167 = EDGE_CURVE('',#205160,#205074,#205168,.T.); +#205168 = LINE('',#205169,#205170); +#205169 = CARTESIAN_POINT('',(134.544597,-77.449999,1.585)); +#205170 = VECTOR('',#205171,1.); +#205171 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#205172 = PLANE('',#205173); +#205173 = AXIS2_PLACEMENT_3D('',#205174,#205175,#205176); +#205174 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205175 = DIRECTION('',(0.,0.,1.)); +#205176 = DIRECTION('',(1.,0.,-0.)); +#205177 = SHELL_BASED_SURFACE_MODEL('',(#205178)); +#205178 = OPEN_SHELL('',(#205179)); +#205179 = ADVANCED_FACE('',(#205180),#205307,.T.); +#205180 = FACE_BOUND('',#205181,.F.); +#205181 = EDGE_LOOP('',(#205182,#205193,#205201,#205209,#205217,#205225, + #205234,#205242,#205250,#205258,#205267,#205275,#205284,#205292, + #205301)); +#205182 = ORIENTED_EDGE('',*,*,#205183,.T.); +#205183 = EDGE_CURVE('',#205184,#205186,#205188,.T.); +#205184 = VERTEX_POINT('',#205185); +#205185 = CARTESIAN_POINT('',(145.239597,-77.429285,1.585)); +#205186 = VERTEX_POINT('',#205187); +#205187 = CARTESIAN_POINT('',(145.239597,-77.299285,1.585)); +#205188 = CIRCLE('',#205189,6.500000000091E-02); +#205189 = AXIS2_PLACEMENT_3D('',#205190,#205191,#205192); +#205190 = CARTESIAN_POINT('',(145.23959734486,-77.364285,1.585)); +#205191 = DIRECTION('',(0.,0.,-1.)); +#205192 = DIRECTION('',(-5.305657588412E-06,-0.999999999986,-0.)); +#205193 = ORIENTED_EDGE('',*,*,#205194,.T.); +#205194 = EDGE_CURVE('',#205186,#205195,#205197,.T.); +#205195 = VERTEX_POINT('',#205196); +#205196 = CARTESIAN_POINT('',(145.971361,-77.29992,1.585)); +#205197 = LINE('',#205198,#205199); +#205198 = CARTESIAN_POINT('',(145.239597,-77.299285,1.585)); +#205199 = VECTOR('',#205200,1.); +#205200 = DIRECTION('',(0.999999623491,-8.677657836673E-04,0.)); +#205201 = ORIENTED_EDGE('',*,*,#205202,.T.); +#205202 = EDGE_CURVE('',#205195,#205203,#205205,.T.); +#205203 = VERTEX_POINT('',#205204); +#205204 = CARTESIAN_POINT('',(145.997237,-77.306147,1.585)); +#205205 = LINE('',#205206,#205207); +#205206 = CARTESIAN_POINT('',(145.971361,-77.29992,1.585)); +#205207 = VECTOR('',#205208,1.); +#205208 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#205209 = ORIENTED_EDGE('',*,*,#205210,.T.); +#205210 = EDGE_CURVE('',#205203,#205211,#205213,.T.); +#205211 = VERTEX_POINT('',#205212); +#205212 = CARTESIAN_POINT('',(146.099843,-77.36118,1.585)); +#205213 = LINE('',#205214,#205215); +#205214 = CARTESIAN_POINT('',(145.997237,-77.306147,1.585)); +#205215 = VECTOR('',#205216,1.); +#205216 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#205217 = ORIENTED_EDGE('',*,*,#205218,.T.); +#205218 = EDGE_CURVE('',#205211,#205219,#205221,.T.); +#205219 = VERTEX_POINT('',#205220); +#205220 = CARTESIAN_POINT('',(146.154878,-77.42093,1.585)); +#205221 = LINE('',#205222,#205223); +#205222 = CARTESIAN_POINT('',(146.099843,-77.36118,1.585)); +#205223 = VECTOR('',#205224,1.); +#205224 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#205225 = ORIENTED_EDGE('',*,*,#205226,.T.); +#205226 = EDGE_CURVE('',#205219,#205227,#205229,.T.); +#205227 = VERTEX_POINT('',#205228); +#205228 = CARTESIAN_POINT('',(146.148491,-77.830154,1.585)); +#205229 = CIRCLE('',#205230,0.358409955812); +#205230 = AXIS2_PLACEMENT_3D('',#205231,#205232,#205233); +#205231 = CARTESIAN_POINT('',(145.85747311066,-77.62095006955,1.585)); +#205232 = DIRECTION('',(0.,0.,-1.)); +#205233 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#205234 = ORIENTED_EDGE('',*,*,#205235,.T.); +#205235 = EDGE_CURVE('',#205227,#205236,#205238,.T.); +#205236 = VERTEX_POINT('',#205237); +#205237 = CARTESIAN_POINT('',(146.091186,-77.88746,1.585)); +#205238 = LINE('',#205239,#205240); +#205239 = CARTESIAN_POINT('',(146.148491,-77.830154,1.585)); +#205240 = VECTOR('',#205241,1.); +#205241 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#205242 = ORIENTED_EDGE('',*,*,#205243,.T.); +#205243 = EDGE_CURVE('',#205236,#205244,#205246,.T.); +#205244 = VERTEX_POINT('',#205245); +#205245 = CARTESIAN_POINT('',(145.982824,-77.940655,1.585)); +#205246 = LINE('',#205247,#205248); +#205247 = CARTESIAN_POINT('',(146.091186,-77.88746,1.585)); +#205248 = VECTOR('',#205249,1.); +#205249 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#205250 = ORIENTED_EDGE('',*,*,#205251,.T.); +#205251 = EDGE_CURVE('',#205244,#205252,#205254,.T.); +#205252 = VERTEX_POINT('',#205253); +#205253 = CARTESIAN_POINT('',(145.239597,-77.943571,1.585)); +#205254 = LINE('',#205255,#205256); +#205255 = CARTESIAN_POINT('',(145.982824,-77.940655,1.585)); +#205256 = VECTOR('',#205257,1.); +#205257 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#205258 = ORIENTED_EDGE('',*,*,#205259,.T.); +#205259 = EDGE_CURVE('',#205252,#205260,#205262,.T.); +#205260 = VERTEX_POINT('',#205261); +#205261 = CARTESIAN_POINT('',(145.239597,-77.813571,1.585)); +#205262 = CIRCLE('',#205263,6.500000000091E-02); +#205263 = AXIS2_PLACEMENT_3D('',#205264,#205265,#205266); +#205264 = CARTESIAN_POINT('',(145.23959734486,-77.878571,1.585)); +#205265 = DIRECTION('',(0.,0.,-1.)); +#205266 = DIRECTION('',(-5.30565758841E-06,-0.999999999986,-0.)); +#205267 = ORIENTED_EDGE('',*,*,#205268,.T.); +#205268 = EDGE_CURVE('',#205260,#205269,#205271,.T.); +#205269 = VERTEX_POINT('',#205270); +#205270 = CARTESIAN_POINT('',(145.952823,-77.813571,1.585)); +#205271 = LINE('',#205272,#205273); +#205272 = CARTESIAN_POINT('',(145.239597,-77.813571,1.585)); +#205273 = VECTOR('',#205274,1.); +#205274 = DIRECTION('',(1.,0.,0.)); +#205275 = ORIENTED_EDGE('',*,*,#205276,.T.); +#205276 = EDGE_CURVE('',#205269,#205277,#205279,.T.); +#205277 = VERTEX_POINT('',#205278); +#205278 = CARTESIAN_POINT('',(146.074597,-77.691797,1.585)); +#205279 = CIRCLE('',#205280,0.170996196456); +#205280 = AXIS2_PLACEMENT_3D('',#205281,#205282,#205283); +#205281 = CARTESIAN_POINT('',(145.9092465,-77.6482205,1.585)); +#205282 = DIRECTION('',(0.,0.,1.)); +#205283 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#205284 = ORIENTED_EDGE('',*,*,#205285,.T.); +#205285 = EDGE_CURVE('',#205277,#205286,#205288,.T.); +#205286 = VERTEX_POINT('',#205287); +#205287 = CARTESIAN_POINT('',(146.074597,-77.551058,1.585)); +#205288 = LINE('',#205289,#205290); +#205289 = CARTESIAN_POINT('',(146.074597,-77.691797,1.585)); +#205290 = VECTOR('',#205291,1.); +#205291 = DIRECTION('',(0.,1.,0.)); +#205292 = ORIENTED_EDGE('',*,*,#205293,.T.); +#205293 = EDGE_CURVE('',#205286,#205294,#205296,.T.); +#205294 = VERTEX_POINT('',#205295); +#205295 = CARTESIAN_POINT('',(145.952823,-77.429285,1.585)); +#205296 = CIRCLE('',#205297,0.170997370267); +#205297 = AXIS2_PLACEMENT_3D('',#205298,#205299,#205300); +#205298 = CARTESIAN_POINT('',(145.90924582251,-77.59463653534,1.585)); +#205299 = DIRECTION('',(0.,0.,1.)); +#205300 = DIRECTION('',(0.966980820969,0.254849155144,-0.)); +#205301 = ORIENTED_EDGE('',*,*,#205302,.T.); +#205302 = EDGE_CURVE('',#205294,#205184,#205303,.T.); +#205303 = LINE('',#205304,#205305); +#205304 = CARTESIAN_POINT('',(145.952823,-77.429285,1.585)); +#205305 = VECTOR('',#205306,1.); +#205306 = DIRECTION('',(-1.,0.,0.)); +#205307 = PLANE('',#205308); +#205308 = AXIS2_PLACEMENT_3D('',#205309,#205310,#205311); +#205309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205310 = DIRECTION('',(0.,0.,1.)); +#205311 = DIRECTION('',(1.,0.,-0.)); +#205312 = SHELL_BASED_SURFACE_MODEL('',(#205313)); +#205313 = OPEN_SHELL('',(#205314)); +#205314 = ADVANCED_FACE('',(#205315),#205657,.T.); +#205315 = FACE_BOUND('',#205316,.F.); +#205316 = EDGE_LOOP('',(#205317,#205327,#205335,#205343,#205351,#205359, + #205367,#205375,#205383,#205391,#205399,#205408,#205416,#205424, + #205433,#205441,#205449,#205457,#205465,#205473,#205481,#205489, + #205497,#205505,#205513,#205521,#205529,#205537,#205545,#205553, + #205561,#205569,#205578,#205586,#205594,#205603,#205611,#205619, + #205627,#205635,#205643,#205651)); +#205317 = ORIENTED_EDGE('',*,*,#205318,.T.); +#205318 = EDGE_CURVE('',#205319,#205321,#205323,.T.); +#205319 = VERTEX_POINT('',#205320); +#205320 = CARTESIAN_POINT('',(186.002447,-76.723383,1.585)); +#205321 = VERTEX_POINT('',#205322); +#205322 = CARTESIAN_POINT('',(186.184204,-76.633673,1.585)); +#205323 = LINE('',#205324,#205325); +#205324 = CARTESIAN_POINT('',(186.002447,-76.723383,1.585)); +#205325 = VECTOR('',#205326,1.); +#205326 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#205327 = ORIENTED_EDGE('',*,*,#205328,.T.); +#205328 = EDGE_CURVE('',#205321,#205329,#205331,.T.); +#205329 = VERTEX_POINT('',#205330); +#205330 = CARTESIAN_POINT('',(186.213257,-76.629766,1.585)); +#205331 = LINE('',#205332,#205333); +#205332 = CARTESIAN_POINT('',(186.184204,-76.633673,1.585)); +#205333 = VECTOR('',#205334,1.); +#205334 = DIRECTION('',(0.991078607395,0.133278632812,0.)); +#205335 = ORIENTED_EDGE('',*,*,#205336,.T.); +#205336 = EDGE_CURVE('',#205329,#205337,#205339,.T.); +#205337 = VERTEX_POINT('',#205338); +#205338 = CARTESIAN_POINT('',(186.387098,-76.63188,1.585)); +#205339 = LINE('',#205340,#205341); +#205340 = CARTESIAN_POINT('',(186.213257,-76.629766,1.585)); +#205341 = VECTOR('',#205342,1.); +#205342 = DIRECTION('',(0.999926068863,-1.215963846025E-02,0.)); +#205343 = ORIENTED_EDGE('',*,*,#205344,.T.); +#205344 = EDGE_CURVE('',#205337,#205345,#205347,.T.); +#205345 = VERTEX_POINT('',#205346); +#205346 = CARTESIAN_POINT('',(186.414831,-76.641379,1.585)); +#205347 = LINE('',#205348,#205349); +#205348 = CARTESIAN_POINT('',(186.387098,-76.63188,1.585)); +#205349 = VECTOR('',#205350,1.); +#205350 = DIRECTION('',(0.946044875797,-0.324035635352,0.)); +#205351 = ORIENTED_EDGE('',*,*,#205352,.T.); +#205352 = EDGE_CURVE('',#205345,#205353,#205355,.T.); +#205353 = VERTEX_POINT('',#205354); +#205354 = CARTESIAN_POINT('',(186.587363,-76.73125,1.585)); +#205355 = LINE('',#205356,#205357); +#205356 = CARTESIAN_POINT('',(186.414831,-76.641379,1.585)); +#205357 = VECTOR('',#205358,1.); +#205358 = DIRECTION('',(0.886891794404,-0.461977212661,0.)); +#205359 = ORIENTED_EDGE('',*,*,#205360,.T.); +#205360 = EDGE_CURVE('',#205353,#205361,#205363,.T.); +#205361 = VERTEX_POINT('',#205362); +#205362 = CARTESIAN_POINT('',(186.686782,-76.833718,1.585)); +#205363 = LINE('',#205364,#205365); +#205364 = CARTESIAN_POINT('',(186.587363,-76.73125,1.585)); +#205365 = VECTOR('',#205366,1.); +#205366 = DIRECTION('',(0.696348286451,-0.717704022531,0.)); +#205367 = ORIENTED_EDGE('',*,*,#205368,.T.); +#205368 = EDGE_CURVE('',#205361,#205369,#205371,.T.); +#205369 = VERTEX_POINT('',#205370); +#205370 = CARTESIAN_POINT('',(186.776493,-77.015475,1.585)); +#205371 = LINE('',#205372,#205373); +#205372 = CARTESIAN_POINT('',(186.686782,-76.833718,1.585)); +#205373 = VECTOR('',#205374,1.); +#205374 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#205375 = ORIENTED_EDGE('',*,*,#205376,.T.); +#205376 = EDGE_CURVE('',#205369,#205377,#205379,.T.); +#205377 = VERTEX_POINT('',#205378); +#205378 = CARTESIAN_POINT('',(186.7804,-77.044528,1.585)); +#205379 = LINE('',#205380,#205381); +#205380 = CARTESIAN_POINT('',(186.776493,-77.015475,1.585)); +#205381 = VECTOR('',#205382,1.); +#205382 = DIRECTION('',(0.133278632812,-0.991078607395,0.)); +#205383 = ORIENTED_EDGE('',*,*,#205384,.T.); +#205384 = EDGE_CURVE('',#205377,#205385,#205387,.T.); +#205385 = VERTEX_POINT('',#205386); +#205386 = CARTESIAN_POINT('',(186.778286,-77.44694,1.585)); +#205387 = LINE('',#205388,#205389); +#205388 = CARTESIAN_POINT('',(186.7804,-77.044528,1.585)); +#205389 = VECTOR('',#205390,1.); +#205390 = DIRECTION('',(-5.253249977965E-03,-0.999986201587,0.)); +#205391 = ORIENTED_EDGE('',*,*,#205392,.T.); +#205392 = EDGE_CURVE('',#205385,#205393,#205395,.T.); +#205393 = VERTEX_POINT('',#205394); +#205394 = CARTESIAN_POINT('',(186.689774,-77.708527,1.585)); +#205395 = LINE('',#205396,#205397); +#205396 = CARTESIAN_POINT('',(186.778286,-77.44694,1.585)); +#205397 = VECTOR('',#205398,1.); +#205398 = DIRECTION('',(-0.320514499422,-0.947243609459,0.)); +#205399 = ORIENTED_EDGE('',*,*,#205400,.T.); +#205400 = EDGE_CURVE('',#205393,#205401,#205403,.T.); +#205401 = VERTEX_POINT('',#205402); +#205402 = CARTESIAN_POINT('',(186.485074,-77.640294,1.585)); +#205403 = CIRCLE('',#205404,0.109999929666); +#205404 = AXIS2_PLACEMENT_3D('',#205405,#205406,#205407); +#205405 = CARTESIAN_POINT('',(186.5942101801,-77.65405186021,1.585)); +#205406 = DIRECTION('',(-0.,0.,-1.)); +#205407 = DIRECTION('',(0.868762554498,-0.495228860126,-0.)); +#205408 = ORIENTED_EDGE('',*,*,#205409,.T.); +#205409 = EDGE_CURVE('',#205401,#205410,#205412,.T.); +#205410 = VERTEX_POINT('',#205411); +#205411 = CARTESIAN_POINT('',(186.5604,-77.40763,1.585)); +#205412 = LINE('',#205413,#205414); +#205413 = CARTESIAN_POINT('',(186.485074,-77.640294,1.585)); +#205414 = VECTOR('',#205415,1.); +#205415 = DIRECTION('',(0.30801407006,0.951381801721,0.)); +#205416 = ORIENTED_EDGE('',*,*,#205417,.T.); +#205417 = EDGE_CURVE('',#205410,#205418,#205420,.T.); +#205418 = VERTEX_POINT('',#205419); +#205419 = CARTESIAN_POINT('',(186.5604,-77.070494,1.585)); +#205420 = LINE('',#205421,#205422); +#205421 = CARTESIAN_POINT('',(186.5604,-77.40763,1.585)); +#205422 = VECTOR('',#205423,1.); +#205423 = DIRECTION('',(0.,1.,0.)); +#205424 = ORIENTED_EDGE('',*,*,#205425,.T.); +#205425 = EDGE_CURVE('',#205418,#205426,#205428,.T.); +#205426 = VERTEX_POINT('',#205427); +#205427 = CARTESIAN_POINT('',(186.339671,-76.849766,1.585)); +#205428 = CIRCLE('',#205429,0.310264637157); +#205429 = AXIS2_PLACEMENT_3D('',#205430,#205431,#205432); +#205430 = CARTESIAN_POINT('',(186.26042631778,-77.14974004122,1.585)); +#205431 = DIRECTION('',(0.,0.,1.)); +#205432 = DIRECTION('',(0.966831685881,0.255414351939,-0.)); +#205433 = ORIENTED_EDGE('',*,*,#205434,.T.); +#205434 = EDGE_CURVE('',#205426,#205435,#205437,.T.); +#205435 = VERTEX_POINT('',#205436); +#205436 = CARTESIAN_POINT('',(186.239224,-76.849766,1.585)); +#205437 = LINE('',#205438,#205439); +#205438 = CARTESIAN_POINT('',(186.339671,-76.849766,1.585)); +#205439 = VECTOR('',#205440,1.); +#205440 = DIRECTION('',(-1.,0.,0.)); +#205441 = ORIENTED_EDGE('',*,*,#205442,.T.); +#205442 = EDGE_CURVE('',#205435,#205443,#205445,.T.); +#205443 = VERTEX_POINT('',#205444); +#205444 = CARTESIAN_POINT('',(186.126036,-76.906359,1.585)); +#205445 = LINE('',#205446,#205447); +#205446 = CARTESIAN_POINT('',(186.239224,-76.849766,1.585)); +#205447 = VECTOR('',#205448,1.); +#205448 = DIRECTION('',(-0.894430351844,-0.447207273756,0.)); +#205449 = ORIENTED_EDGE('',*,*,#205450,.T.); +#205450 = EDGE_CURVE('',#205443,#205451,#205453,.T.); +#205451 = VERTEX_POINT('',#205452); +#205452 = CARTESIAN_POINT('',(186.07509,-76.957305,1.585)); +#205453 = LINE('',#205454,#205455); +#205454 = CARTESIAN_POINT('',(186.126036,-76.906359,1.585)); +#205455 = VECTOR('',#205456,1.); +#205456 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#205457 = ORIENTED_EDGE('',*,*,#205458,.T.); +#205458 = EDGE_CURVE('',#205451,#205459,#205461,.T.); +#205459 = VERTEX_POINT('',#205460); +#205460 = CARTESIAN_POINT('',(186.012282,-77.082921,1.585)); +#205461 = LINE('',#205462,#205463); +#205462 = CARTESIAN_POINT('',(186.07509,-76.957305,1.585)); +#205463 = VECTOR('',#205464,1.); +#205464 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#205465 = ORIENTED_EDGE('',*,*,#205466,.T.); +#205466 = EDGE_CURVE('',#205459,#205467,#205469,.T.); +#205467 = VERTEX_POINT('',#205468); +#205468 = CARTESIAN_POINT('',(185.930692,-77.398484,1.585)); +#205469 = LINE('',#205470,#205471); +#205470 = CARTESIAN_POINT('',(186.012282,-77.082921,1.585)); +#205471 = VECTOR('',#205472,1.); +#205472 = DIRECTION('',(-0.250322084543,-0.968162617534,0.)); +#205473 = ORIENTED_EDGE('',*,*,#205474,.T.); +#205474 = EDGE_CURVE('',#205467,#205475,#205477,.T.); +#205475 = VERTEX_POINT('',#205476); +#205476 = CARTESIAN_POINT('',(185.840817,-77.571018,1.585)); +#205477 = LINE('',#205478,#205479); +#205478 = CARTESIAN_POINT('',(185.930692,-77.398484,1.585)); +#205479 = VECTOR('',#205480,1.); +#205480 = DIRECTION('',(-0.461989173503,-0.886885563963,0.)); +#205481 = ORIENTED_EDGE('',*,*,#205482,.T.); +#205482 = EDGE_CURVE('',#205475,#205483,#205485,.T.); +#205483 = VERTEX_POINT('',#205484); +#205484 = CARTESIAN_POINT('',(185.738354,-77.670432,1.585)); +#205485 = LINE('',#205486,#205487); +#205486 = CARTESIAN_POINT('',(185.840817,-77.571018,1.585)); +#205487 = VECTOR('',#205488,1.); +#205488 = DIRECTION('',(-0.717704543353,-0.696347749655,0.)); +#205489 = ORIENTED_EDGE('',*,*,#205490,.T.); +#205490 = EDGE_CURVE('',#205483,#205491,#205493,.T.); +#205491 = VERTEX_POINT('',#205492); +#205492 = CARTESIAN_POINT('',(185.556597,-77.760145,1.585)); +#205493 = LINE('',#205494,#205495); +#205494 = CARTESIAN_POINT('',(185.738354,-77.670432,1.585)); +#205495 = VECTOR('',#205496,1.); +#205496 = DIRECTION('',(-0.896715403621,-0.442607596984,0.)); +#205497 = ORIENTED_EDGE('',*,*,#205498,.T.); +#205498 = EDGE_CURVE('',#205491,#205499,#205501,.T.); +#205499 = VERTEX_POINT('',#205500); +#205500 = CARTESIAN_POINT('',(185.527543,-77.764052,1.585)); +#205501 = LINE('',#205502,#205503); +#205502 = CARTESIAN_POINT('',(185.556597,-77.760145,1.585)); +#205503 = VECTOR('',#205504,1.); +#205504 = DIRECTION('',(-0.991079213316,-0.13327412702,0.)); +#205505 = ORIENTED_EDGE('',*,*,#205506,.T.); +#205506 = EDGE_CURVE('',#205499,#205507,#205509,.T.); +#205507 = VERTEX_POINT('',#205508); +#205508 = CARTESIAN_POINT('',(185.353702,-77.761938,1.585)); +#205509 = LINE('',#205510,#205511); +#205510 = CARTESIAN_POINT('',(185.527543,-77.764052,1.585)); +#205511 = VECTOR('',#205512,1.); +#205512 = DIRECTION('',(-0.999926068863,1.215963846033E-02,0.)); +#205513 = ORIENTED_EDGE('',*,*,#205514,.T.); +#205514 = EDGE_CURVE('',#205507,#205515,#205517,.T.); +#205515 = VERTEX_POINT('',#205516); +#205516 = CARTESIAN_POINT('',(185.325968,-77.752439,1.585)); +#205517 = LINE('',#205518,#205519); +#205518 = CARTESIAN_POINT('',(185.353702,-77.761938,1.585)); +#205519 = VECTOR('',#205520,1.); +#205520 = DIRECTION('',(-0.946048457417,0.324025178373,0.)); +#205521 = ORIENTED_EDGE('',*,*,#205522,.T.); +#205522 = EDGE_CURVE('',#205515,#205523,#205525,.T.); +#205523 = VERTEX_POINT('',#205524); +#205524 = CARTESIAN_POINT('',(185.153435,-77.662566,1.585)); +#205525 = LINE('',#205526,#205527); +#205526 = CARTESIAN_POINT('',(185.325968,-77.752439,1.585)); +#205527 = VECTOR('',#205528,1.); +#205528 = DIRECTION('',(-0.886888679175,0.461983193148,0.)); +#205529 = ORIENTED_EDGE('',*,*,#205530,.T.); +#205530 = EDGE_CURVE('',#205523,#205531,#205533,.T.); +#205531 = VERTEX_POINT('',#205532); +#205532 = CARTESIAN_POINT('',(185.054017,-77.560099,1.585)); +#205533 = LINE('',#205534,#205535); +#205534 = CARTESIAN_POINT('',(185.153435,-77.662566,1.585)); +#205535 = VECTOR('',#205536,1.); +#205536 = DIRECTION('',(-0.696348179096,0.717704126691,0.)); +#205537 = ORIENTED_EDGE('',*,*,#205538,.T.); +#205538 = EDGE_CURVE('',#205531,#205539,#205541,.T.); +#205539 = VERTEX_POINT('',#205540); +#205540 = CARTESIAN_POINT('',(184.964307,-77.378343,1.585)); +#205541 = LINE('',#205542,#205543); +#205542 = CARTESIAN_POINT('',(185.054017,-77.560099,1.585)); +#205543 = VECTOR('',#205544,1.); +#205544 = DIRECTION('',(-0.442597653669,0.89672031145,0.)); +#205545 = ORIENTED_EDGE('',*,*,#205546,.T.); +#205546 = EDGE_CURVE('',#205539,#205547,#205549,.T.); +#205547 = VERTEX_POINT('',#205548); +#205548 = CARTESIAN_POINT('',(184.9604,-77.34929,1.585)); +#205549 = LINE('',#205550,#205551); +#205550 = CARTESIAN_POINT('',(184.964307,-77.378343,1.585)); +#205551 = VECTOR('',#205552,1.); +#205552 = DIRECTION('',(-0.133278632812,0.991078607395,0.)); +#205553 = ORIENTED_EDGE('',*,*,#205554,.T.); +#205554 = EDGE_CURVE('',#205547,#205555,#205557,.T.); +#205555 = VERTEX_POINT('',#205556); +#205556 = CARTESIAN_POINT('',(184.962514,-76.946877,1.585)); +#205557 = LINE('',#205558,#205559); +#205558 = CARTESIAN_POINT('',(184.9604,-77.34929,1.585)); +#205559 = VECTOR('',#205560,1.); +#205560 = DIRECTION('',(5.253236924021E-03,0.999986201656,0.)); +#205561 = ORIENTED_EDGE('',*,*,#205562,.T.); +#205562 = EDGE_CURVE('',#205555,#205563,#205565,.T.); +#205563 = VERTEX_POINT('',#205564); +#205564 = CARTESIAN_POINT('',(185.051027,-76.685291,1.585)); +#205565 = LINE('',#205566,#205567); +#205566 = CARTESIAN_POINT('',(184.962514,-76.946877,1.585)); +#205567 = VECTOR('',#205568,1.); +#205568 = DIRECTION('',(0.32051884797,0.947242138049,0.)); +#205569 = ORIENTED_EDGE('',*,*,#205570,.T.); +#205570 = EDGE_CURVE('',#205563,#205571,#205573,.T.); +#205571 = VERTEX_POINT('',#205572); +#205572 = CARTESIAN_POINT('',(185.255726,-76.753524,1.585)); +#205573 = CIRCLE('',#205574,0.109999365974); +#205574 = AXIS2_PLACEMENT_3D('',#205575,#205576,#205577); +#205575 = CARTESIAN_POINT('',(185.14659044966,-76.73976565101,1.585)); +#205576 = DIRECTION('',(0.,0.,-1.)); +#205577 = DIRECTION('',(-0.868763640723,0.495226954596,0.)); +#205578 = ORIENTED_EDGE('',*,*,#205579,.T.); +#205579 = EDGE_CURVE('',#205571,#205580,#205582,.T.); +#205580 = VERTEX_POINT('',#205581); +#205581 = CARTESIAN_POINT('',(185.1804,-76.986186,1.585)); +#205582 = LINE('',#205583,#205584); +#205583 = CARTESIAN_POINT('',(185.255726,-76.753524,1.585)); +#205584 = VECTOR('',#205585,1.); +#205585 = DIRECTION('',(-0.308016466597,-0.951381025828,0.)); +#205586 = ORIENTED_EDGE('',*,*,#205587,.T.); +#205587 = EDGE_CURVE('',#205580,#205588,#205590,.T.); +#205588 = VERTEX_POINT('',#205589); +#205589 = CARTESIAN_POINT('',(185.1804,-77.323323,1.585)); +#205590 = LINE('',#205591,#205592); +#205591 = CARTESIAN_POINT('',(185.1804,-76.986186,1.585)); +#205592 = VECTOR('',#205593,1.); +#205593 = DIRECTION('',(0.,-1.,0.)); +#205594 = ORIENTED_EDGE('',*,*,#205595,.T.); +#205595 = EDGE_CURVE('',#205588,#205596,#205598,.T.); +#205596 = VERTEX_POINT('',#205597); +#205597 = CARTESIAN_POINT('',(185.401129,-77.544052,1.585)); +#205598 = CIRCLE('',#205599,0.31025820014); +#205599 = AXIS2_PLACEMENT_3D('',#205600,#205601,#205602); +#205600 = CARTESIAN_POINT('',(185.48036869962,-77.24408330037,1.585)); +#205601 = DIRECTION('',(0.,0.,1.)); +#205602 = DIRECTION('',(-0.966835685546,-0.255399211344,0.)); +#205603 = ORIENTED_EDGE('',*,*,#205604,.T.); +#205604 = EDGE_CURVE('',#205596,#205605,#205607,.T.); +#205605 = VERTEX_POINT('',#205606); +#205606 = CARTESIAN_POINT('',(185.501575,-77.544052,1.585)); +#205607 = LINE('',#205608,#205609); +#205608 = CARTESIAN_POINT('',(185.401129,-77.544052,1.585)); +#205609 = VECTOR('',#205610,1.); +#205610 = DIRECTION('',(1.,0.,0.)); +#205611 = ORIENTED_EDGE('',*,*,#205612,.T.); +#205612 = EDGE_CURVE('',#205605,#205613,#205615,.T.); +#205613 = VERTEX_POINT('',#205614); +#205614 = CARTESIAN_POINT('',(185.614763,-77.487457,1.585)); +#205615 = LINE('',#205616,#205617); +#205616 = CARTESIAN_POINT('',(185.501575,-77.544052,1.585)); +#205617 = VECTOR('',#205618,1.); +#205618 = DIRECTION('',(0.894424030134,0.447219917177,0.)); +#205619 = ORIENTED_EDGE('',*,*,#205620,.T.); +#205620 = EDGE_CURVE('',#205613,#205621,#205623,.T.); +#205621 = VERTEX_POINT('',#205622); +#205622 = CARTESIAN_POINT('',(185.66571,-77.43651,1.585)); +#205623 = LINE('',#205624,#205625); +#205624 = CARTESIAN_POINT('',(185.614763,-77.487457,1.585)); +#205625 = VECTOR('',#205626,1.); +#205626 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#205627 = ORIENTED_EDGE('',*,*,#205628,.T.); +#205628 = EDGE_CURVE('',#205621,#205629,#205631,.T.); +#205629 = VERTEX_POINT('',#205630); +#205630 = CARTESIAN_POINT('',(185.728517,-77.310898,1.585)); +#205631 = LINE('',#205632,#205633); +#205632 = CARTESIAN_POINT('',(185.66571,-77.43651,1.585)); +#205633 = VECTOR('',#205634,1.); +#205634 = DIRECTION('',(0.447219291917,0.894424342769,0.)); +#205635 = ORIENTED_EDGE('',*,*,#205636,.T.); +#205636 = EDGE_CURVE('',#205629,#205637,#205639,.T.); +#205637 = VERTEX_POINT('',#205638); +#205638 = CARTESIAN_POINT('',(185.810108,-76.995334,1.585)); +#205639 = LINE('',#205640,#205641); +#205640 = CARTESIAN_POINT('',(185.728517,-77.310898,1.585)); +#205641 = VECTOR('',#205642,1.); +#205642 = DIRECTION('',(0.250324216786,0.968162066232,0.)); +#205643 = ORIENTED_EDGE('',*,*,#205644,.T.); +#205644 = EDGE_CURVE('',#205637,#205645,#205647,.T.); +#205645 = VERTEX_POINT('',#205646); +#205646 = CARTESIAN_POINT('',(185.899979,-76.822803,1.585)); +#205647 = LINE('',#205648,#205649); +#205648 = CARTESIAN_POINT('',(185.810108,-76.995334,1.585)); +#205649 = VECTOR('',#205650,1.); +#205650 = DIRECTION('',(0.461979318834,0.886890697307,0.)); +#205651 = ORIENTED_EDGE('',*,*,#205652,.T.); +#205652 = EDGE_CURVE('',#205645,#205319,#205653,.T.); +#205653 = LINE('',#205654,#205655); +#205654 = CARTESIAN_POINT('',(185.899979,-76.822803,1.585)); +#205655 = VECTOR('',#205656,1.); +#205656 = DIRECTION('',(0.717700522048,0.696351894269,0.)); +#205657 = PLANE('',#205658); +#205658 = AXIS2_PLACEMENT_3D('',#205659,#205660,#205661); +#205659 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205660 = DIRECTION('',(0.,0.,1.)); +#205661 = DIRECTION('',(1.,0.,-0.)); +#205662 = SHELL_BASED_SURFACE_MODEL('',(#205663)); +#205663 = OPEN_SHELL('',(#205664)); +#205664 = ADVANCED_FACE('',(#205665),#205867,.T.); +#205665 = FACE_BOUND('',#205666,.F.); +#205666 = EDGE_LOOP('',(#205667,#205678,#205686,#205694,#205702,#205710, + #205719,#205727,#205736,#205744,#205753,#205761,#205770,#205778, + #205787,#205795,#205804,#205812,#205820,#205828,#205837,#205845, + #205853,#205861)); +#205667 = ORIENTED_EDGE('',*,*,#205668,.T.); +#205668 = EDGE_CURVE('',#205669,#205671,#205673,.T.); +#205669 = VERTEX_POINT('',#205670); +#205670 = CARTESIAN_POINT('',(150.160369,-77.185343,1.585)); +#205671 = VERTEX_POINT('',#205672); +#205672 = CARTESIAN_POINT('',(150.379225,-76.966486,1.585)); +#205673 = CIRCLE('',#205674,0.308109459502); +#205674 = AXIS2_PLACEMENT_3D('',#205675,#205676,#205677); +#205675 = CARTESIAN_POINT('',(150.45818845359,-77.26430509279,1.585)); +#205676 = DIRECTION('',(0.,0.,-1.)); +#205677 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#205678 = ORIENTED_EDGE('',*,*,#205679,.T.); +#205679 = EDGE_CURVE('',#205671,#205680,#205682,.T.); +#205680 = VERTEX_POINT('',#205681); +#205681 = CARTESIAN_POINT('',(150.611361,-76.964206,1.585)); +#205682 = LINE('',#205683,#205684); +#205683 = CARTESIAN_POINT('',(150.379225,-76.966486,1.585)); +#205684 = VECTOR('',#205685,1.); +#205685 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#205686 = ORIENTED_EDGE('',*,*,#205687,.T.); +#205687 = EDGE_CURVE('',#205680,#205688,#205690,.T.); +#205688 = VERTEX_POINT('',#205689); +#205689 = CARTESIAN_POINT('',(150.637237,-76.970433,1.585)); +#205690 = LINE('',#205691,#205692); +#205691 = CARTESIAN_POINT('',(150.611361,-76.964206,1.585)); +#205692 = VECTOR('',#205693,1.); +#205693 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#205694 = ORIENTED_EDGE('',*,*,#205695,.T.); +#205695 = EDGE_CURVE('',#205688,#205696,#205698,.T.); +#205696 = VERTEX_POINT('',#205697); +#205697 = CARTESIAN_POINT('',(150.739844,-77.025466,1.585)); +#205698 = LINE('',#205699,#205700); +#205699 = CARTESIAN_POINT('',(150.637237,-76.970433,1.585)); +#205700 = VECTOR('',#205701,1.); +#205701 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#205702 = ORIENTED_EDGE('',*,*,#205703,.T.); +#205703 = EDGE_CURVE('',#205696,#205704,#205706,.T.); +#205704 = VERTEX_POINT('',#205705); +#205705 = CARTESIAN_POINT('',(150.794878,-77.085217,1.585)); +#205706 = LINE('',#205707,#205708); +#205707 = CARTESIAN_POINT('',(150.739844,-77.025466,1.585)); +#205708 = VECTOR('',#205709,1.); +#205709 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#205710 = ORIENTED_EDGE('',*,*,#205711,.T.); +#205711 = EDGE_CURVE('',#205704,#205712,#205714,.T.); +#205712 = VERTEX_POINT('',#205713); +#205713 = CARTESIAN_POINT('',(150.788491,-77.537297,1.585)); +#205714 = CIRCLE('',#205715,0.407997408492); +#205715 = AXIS2_PLACEMENT_3D('',#205716,#205717,#205718); +#205716 = CARTESIAN_POINT('',(150.4520750414,-77.30645898723,1.585)); +#205717 = DIRECTION('',(0.,0.,-1.)); +#205718 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#205719 = ORIENTED_EDGE('',*,*,#205720,.T.); +#205720 = EDGE_CURVE('',#205712,#205721,#205723,.T.); +#205721 = VERTEX_POINT('',#205722); +#205722 = CARTESIAN_POINT('',(150.739843,-77.588819,1.585)); +#205723 = LINE('',#205724,#205725); +#205724 = CARTESIAN_POINT('',(150.788491,-77.537297,1.585)); +#205725 = VECTOR('',#205726,1.); +#205726 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#205727 = ORIENTED_EDGE('',*,*,#205728,.T.); +#205728 = EDGE_CURVE('',#205721,#205729,#205731,.T.); +#205729 = VERTEX_POINT('',#205730); +#205730 = CARTESIAN_POINT('',(150.647921,-77.496895,1.585)); +#205731 = CIRCLE('',#205732,6.499937665136E-02); +#205732 = AXIS2_PLACEMENT_3D('',#205733,#205734,#205735); +#205733 = CARTESIAN_POINT('',(150.69388218097,-77.54285681902,1.585)); +#205734 = DIRECTION('',(-0.,0.,-1.)); +#205735 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#205736 = ORIENTED_EDGE('',*,*,#205737,.T.); +#205737 = EDGE_CURVE('',#205729,#205738,#205740,.T.); +#205738 = VERTEX_POINT('',#205739); +#205739 = CARTESIAN_POINT('',(150.683319,-77.461497,1.585)); +#205740 = LINE('',#205741,#205742); +#205741 = CARTESIAN_POINT('',(150.647921,-77.496895,1.585)); +#205742 = VECTOR('',#205743,1.); +#205743 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#205744 = ORIENTED_EDGE('',*,*,#205745,.T.); +#205745 = EDGE_CURVE('',#205738,#205746,#205748,.T.); +#205746 = VERTEX_POINT('',#205747); +#205747 = CARTESIAN_POINT('',(150.683319,-77.152789,1.585)); +#205748 = CIRCLE('',#205749,0.277419178294); +#205749 = AXIS2_PLACEMENT_3D('',#205750,#205751,#205752); +#205750 = CARTESIAN_POINT('',(150.452806,-77.307143,1.585)); +#205751 = DIRECTION('',(0.,-0.,1.)); +#205752 = DIRECTION('',(0.830919482273,-0.556392679661,-0.)); +#205753 = ORIENTED_EDGE('',*,*,#205754,.T.); +#205754 = EDGE_CURVE('',#205746,#205755,#205757,.T.); +#205755 = VERTEX_POINT('',#205756); +#205756 = CARTESIAN_POINT('',(150.655379,-77.124849,1.585)); +#205757 = LINE('',#205758,#205759); +#205758 = CARTESIAN_POINT('',(150.683319,-77.152789,1.585)); +#205759 = VECTOR('',#205760,1.); +#205760 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#205761 = ORIENTED_EDGE('',*,*,#205762,.T.); +#205762 = EDGE_CURVE('',#205755,#205763,#205765,.T.); +#205763 = VERTEX_POINT('',#205764); +#205764 = CARTESIAN_POINT('',(150.346671,-77.124849,1.585)); +#205765 = CIRCLE('',#205766,0.277419178293); +#205766 = AXIS2_PLACEMENT_3D('',#205767,#205768,#205769); +#205767 = CARTESIAN_POINT('',(150.501025,-77.355362,1.585)); +#205768 = DIRECTION('',(0.,0.,1.)); +#205769 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#205770 = ORIENTED_EDGE('',*,*,#205771,.T.); +#205771 = EDGE_CURVE('',#205763,#205772,#205774,.T.); +#205772 = VERTEX_POINT('',#205773); +#205773 = CARTESIAN_POINT('',(150.318733,-77.152787,1.585)); +#205774 = LINE('',#205775,#205776); +#205775 = CARTESIAN_POINT('',(150.346671,-77.124849,1.585)); +#205776 = VECTOR('',#205777,1.); +#205777 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#205778 = ORIENTED_EDGE('',*,*,#205779,.T.); +#205779 = EDGE_CURVE('',#205772,#205780,#205782,.T.); +#205780 = VERTEX_POINT('',#205781); +#205781 = CARTESIAN_POINT('',(150.318732,-77.461497,1.585)); +#205782 = CIRCLE('',#205783,0.277420975587); +#205783 = AXIS2_PLACEMENT_3D('',#205784,#205785,#205786); +#205784 = CARTESIAN_POINT('',(150.5492469934,-77.3071427467,1.585)); +#205785 = DIRECTION('',(0.,0.,1.)); +#205786 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#205787 = ORIENTED_EDGE('',*,*,#205788,.T.); +#205788 = EDGE_CURVE('',#205780,#205789,#205791,.T.); +#205789 = VERTEX_POINT('',#205790); +#205790 = CARTESIAN_POINT('',(150.35413,-77.496895,1.585)); +#205791 = LINE('',#205792,#205793); +#205792 = CARTESIAN_POINT('',(150.318732,-77.461497,1.585)); +#205793 = VECTOR('',#205794,1.); +#205794 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#205795 = ORIENTED_EDGE('',*,*,#205796,.T.); +#205796 = EDGE_CURVE('',#205789,#205797,#205799,.T.); +#205797 = VERTEX_POINT('',#205798); +#205798 = CARTESIAN_POINT('',(150.301701,-77.607534,1.585)); +#205799 = CIRCLE('',#205800,6.499980032119E-02); +#205800 = AXIS2_PLACEMENT_3D('',#205801,#205802,#205803); +#205801 = CARTESIAN_POINT('',(150.30816812219,-77.54285672136,1.585)); +#205802 = DIRECTION('',(0.,0.,-1.)); +#205803 = DIRECTION('',(0.707107984623,0.707105577748,0.)); +#205804 = ORIENTED_EDGE('',*,*,#205805,.T.); +#205805 = EDGE_CURVE('',#205797,#205806,#205808,.T.); +#205806 = VERTEX_POINT('',#205807); +#205807 = CARTESIAN_POINT('',(149.854723,-77.560052,1.585)); +#205808 = LINE('',#205809,#205810); +#205809 = CARTESIAN_POINT('',(150.301701,-77.607534,1.585)); +#205810 = VECTOR('',#205811,1.); +#205811 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#205812 = ORIENTED_EDGE('',*,*,#205813,.T.); +#205813 = EDGE_CURVE('',#205806,#205814,#205816,.T.); +#205814 = VERTEX_POINT('',#205815); +#205815 = CARTESIAN_POINT('',(149.817368,-77.518775,1.585)); +#205816 = LINE('',#205817,#205818); +#205817 = CARTESIAN_POINT('',(149.854723,-77.560052,1.585)); +#205818 = VECTOR('',#205819,1.); +#205819 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#205820 = ORIENTED_EDGE('',*,*,#205821,.T.); +#205821 = EDGE_CURVE('',#205814,#205822,#205824,.T.); +#205822 = VERTEX_POINT('',#205823); +#205823 = CARTESIAN_POINT('',(149.814597,-77.071428,1.585)); +#205824 = LINE('',#205825,#205826); +#205825 = CARTESIAN_POINT('',(149.817368,-77.518775,1.585)); +#205826 = VECTOR('',#205827,1.); +#205827 = DIRECTION('',(-6.194177765461E-03,0.999980815897,0.)); +#205828 = ORIENTED_EDGE('',*,*,#205829,.T.); +#205829 = EDGE_CURVE('',#205822,#205830,#205832,.T.); +#205830 = VERTEX_POINT('',#205831); +#205831 = CARTESIAN_POINT('',(149.944597,-77.071428,1.585)); +#205832 = CIRCLE('',#205833,6.500000000092E-02); +#205833 = AXIS2_PLACEMENT_3D('',#205834,#205835,#205836); +#205834 = CARTESIAN_POINT('',(149.879597,-77.07142834486,1.585)); +#205835 = DIRECTION('',(0.,0.,-1.)); +#205836 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#205837 = ORIENTED_EDGE('',*,*,#205838,.T.); +#205838 = EDGE_CURVE('',#205830,#205839,#205841,.T.); +#205839 = VERTEX_POINT('',#205840); +#205840 = CARTESIAN_POINT('',(149.944597,-77.441176,1.585)); +#205841 = LINE('',#205842,#205843); +#205842 = CARTESIAN_POINT('',(149.944597,-77.071428,1.585)); +#205843 = VECTOR('',#205844,1.); +#205844 = DIRECTION('',(0.,-1.,0.)); +#205845 = ORIENTED_EDGE('',*,*,#205846,.T.); +#205846 = EDGE_CURVE('',#205839,#205847,#205849,.T.); +#205847 = VERTEX_POINT('',#205848); +#205848 = CARTESIAN_POINT('',(150.174733,-77.464189,1.585)); +#205849 = LINE('',#205850,#205851); +#205850 = CARTESIAN_POINT('',(149.944597,-77.441176,1.585)); +#205851 = VECTOR('',#205852,1.); +#205852 = DIRECTION('',(0.99503744706,-9.95011504901E-02,0.)); +#205853 = ORIENTED_EDGE('',*,*,#205854,.T.); +#205854 = EDGE_CURVE('',#205847,#205855,#205857,.T.); +#205855 = VERTEX_POINT('',#205856); +#205856 = CARTESIAN_POINT('',(150.157618,-77.418894,1.585)); +#205857 = LINE('',#205858,#205859); +#205858 = CARTESIAN_POINT('',(150.174733,-77.464189,1.585)); +#205859 = VECTOR('',#205860,1.); +#205860 = DIRECTION('',(-0.353464827547,0.935447815587,0.)); +#205861 = ORIENTED_EDGE('',*,*,#205862,.T.); +#205862 = EDGE_CURVE('',#205855,#205669,#205863,.T.); +#205863 = LINE('',#205864,#205865); +#205864 = CARTESIAN_POINT('',(150.157618,-77.418894,1.585)); +#205865 = VECTOR('',#205866,1.); +#205866 = DIRECTION('',(1.177819480941E-02,0.999930634658,0.)); +#205867 = PLANE('',#205868); +#205868 = AXIS2_PLACEMENT_3D('',#205869,#205870,#205871); +#205869 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205870 = DIRECTION('',(0.,0.,1.)); +#205871 = DIRECTION('',(1.,0.,-0.)); +#205872 = SHELL_BASED_SURFACE_MODEL('',(#205873)); +#205873 = OPEN_SHELL('',(#205874)); +#205874 = ADVANCED_FACE('',(#205875),#205977,.T.); +#205875 = FACE_BOUND('',#205876,.F.); +#205876 = EDGE_LOOP('',(#205877,#205888,#205896,#205904,#205913,#205921, + #205929,#205938,#205946,#205954,#205963,#205971)); +#205877 = ORIENTED_EDGE('',*,*,#205878,.T.); +#205878 = EDGE_CURVE('',#205879,#205881,#205883,.T.); +#205879 = VERTEX_POINT('',#205880); +#205880 = CARTESIAN_POINT('',(172.288774,-76.373542,1.585)); +#205881 = VERTEX_POINT('',#205882); +#205882 = CARTESIAN_POINT('',(172.39694,-76.445653,1.585)); +#205883 = CIRCLE('',#205884,6.499976899535E-02); +#205884 = AXIS2_PLACEMENT_3D('',#205885,#205886,#205887); +#205885 = CARTESIAN_POINT('',(172.34285675277,-76.40959787082,1.585)); +#205886 = DIRECTION('',(0.,0.,-1.)); +#205887 = DIRECTION('',(-0.83204530747,0.554707676454,0.)); +#205888 = ORIENTED_EDGE('',*,*,#205889,.T.); +#205889 = EDGE_CURVE('',#205881,#205890,#205892,.T.); +#205890 = VERTEX_POINT('',#205891); +#205891 = CARTESIAN_POINT('',(172.120977,-76.859597,1.585)); +#205892 = LINE('',#205893,#205894); +#205893 = CARTESIAN_POINT('',(172.39694,-76.445653,1.585)); +#205894 = VECTOR('',#205895,1.); +#205895 = DIRECTION('',(-0.554700660084,-0.832049985099,0.)); +#205896 = ORIENTED_EDGE('',*,*,#205897,.T.); +#205897 = EDGE_CURVE('',#205890,#205898,#205900,.T.); +#205898 = VERTEX_POINT('',#205899); +#205899 = CARTESIAN_POINT('',(172.39694,-77.273541,1.585)); +#205900 = LINE('',#205901,#205902); +#205901 = CARTESIAN_POINT('',(172.120977,-76.859597,1.585)); +#205902 = VECTOR('',#205903,1.); +#205903 = DIRECTION('',(0.554700660084,-0.832049985099,0.)); +#205904 = ORIENTED_EDGE('',*,*,#205905,.T.); +#205905 = EDGE_CURVE('',#205898,#205906,#205908,.T.); +#205906 = VERTEX_POINT('',#205907); +#205907 = CARTESIAN_POINT('',(172.288774,-77.345652,1.585)); +#205908 = CIRCLE('',#205909,6.499976899535E-02); +#205909 = AXIS2_PLACEMENT_3D('',#205910,#205911,#205912); +#205910 = CARTESIAN_POINT('',(172.34285675277,-77.30959612917,1.585)); +#205911 = DIRECTION('',(0.,0.,-1.)); +#205912 = DIRECTION('',(0.832052914291,0.554696266276,0.)); +#205913 = ORIENTED_EDGE('',*,*,#205914,.T.); +#205914 = EDGE_CURVE('',#205906,#205915,#205917,.T.); +#205915 = VERTEX_POINT('',#205916); +#205916 = CARTESIAN_POINT('',(172.042857,-76.976777,1.585)); +#205917 = LINE('',#205918,#205919); +#205918 = CARTESIAN_POINT('',(172.288774,-77.345652,1.585)); +#205919 = VECTOR('',#205920,1.); +#205920 = DIRECTION('',(-0.554700716758,0.832049947316,0.)); +#205921 = ORIENTED_EDGE('',*,*,#205922,.T.); +#205922 = EDGE_CURVE('',#205915,#205923,#205925,.T.); +#205923 = VERTEX_POINT('',#205924); +#205924 = CARTESIAN_POINT('',(171.79694,-77.345653,1.585)); +#205925 = LINE('',#205926,#205927); +#205926 = CARTESIAN_POINT('',(172.042857,-76.976777,1.585)); +#205927 = VECTOR('',#205928,1.); +#205928 = DIRECTION('',(-0.554699675693,-0.832050641359,0.)); +#205929 = ORIENTED_EDGE('',*,*,#205930,.T.); +#205930 = EDGE_CURVE('',#205923,#205931,#205933,.T.); +#205931 = VERTEX_POINT('',#205932); +#205932 = CARTESIAN_POINT('',(171.688774,-77.273541,1.585)); +#205933 = CIRCLE('',#205934,6.500004634724E-02); +#205934 = AXIS2_PLACEMENT_3D('',#205935,#205936,#205937); +#205935 = CARTESIAN_POINT('',(171.74285720937,-77.30959668594,1.585)); +#205936 = DIRECTION('',(-0.,0.,-1.)); +#205937 = DIRECTION('',(0.832042339427,-0.554712128406,-0.)); +#205938 = ORIENTED_EDGE('',*,*,#205939,.T.); +#205939 = EDGE_CURVE('',#205931,#205940,#205942,.T.); +#205940 = VERTEX_POINT('',#205941); +#205941 = CARTESIAN_POINT('',(171.964736,-76.859597,1.585)); +#205942 = LINE('',#205943,#205944); +#205943 = CARTESIAN_POINT('',(171.688774,-77.273541,1.585)); +#205944 = VECTOR('',#205945,1.); +#205945 = DIRECTION('',(0.554699268506,0.832050912816,0.)); +#205946 = ORIENTED_EDGE('',*,*,#205947,.T.); +#205947 = EDGE_CURVE('',#205940,#205948,#205950,.T.); +#205948 = VERTEX_POINT('',#205949); +#205949 = CARTESIAN_POINT('',(171.688774,-76.445653,1.585)); +#205950 = LINE('',#205951,#205952); +#205951 = CARTESIAN_POINT('',(171.964736,-76.859597,1.585)); +#205952 = VECTOR('',#205953,1.); +#205953 = DIRECTION('',(-0.554699268506,0.832050912816,0.)); +#205954 = ORIENTED_EDGE('',*,*,#205955,.T.); +#205955 = EDGE_CURVE('',#205948,#205956,#205958,.T.); +#205956 = VERTEX_POINT('',#205957); +#205957 = CARTESIAN_POINT('',(171.79694,-76.373541,1.585)); +#205958 = CIRCLE('',#205959,6.500004634766E-02); +#205959 = AXIS2_PLACEMENT_3D('',#205960,#205961,#205962); +#205960 = CARTESIAN_POINT('',(171.74285724669,-76.40959737004,1.585)); +#205961 = DIRECTION('',(0.,0.,-1.)); +#205962 = DIRECTION('',(-0.832049355929,-0.554701603836,-0.)); +#205963 = ORIENTED_EDGE('',*,*,#205964,.T.); +#205964 = EDGE_CURVE('',#205956,#205965,#205967,.T.); +#205965 = VERTEX_POINT('',#205966); +#205966 = CARTESIAN_POINT('',(172.042857,-76.742416,1.585)); +#205967 = LINE('',#205968,#205969); +#205968 = CARTESIAN_POINT('',(171.79694,-76.373541,1.585)); +#205969 = VECTOR('',#205970,1.); +#205970 = DIRECTION('',(0.554700716758,-0.832049947316,0.)); +#205971 = ORIENTED_EDGE('',*,*,#205972,.T.); +#205972 = EDGE_CURVE('',#205965,#205879,#205973,.T.); +#205973 = LINE('',#205974,#205975); +#205974 = CARTESIAN_POINT('',(172.042857,-76.742416,1.585)); +#205975 = VECTOR('',#205976,1.); +#205976 = DIRECTION('',(0.554701757825,0.832049253269,0.)); +#205977 = PLANE('',#205978); +#205978 = AXIS2_PLACEMENT_3D('',#205979,#205980,#205981); +#205979 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205980 = DIRECTION('',(0.,0.,1.)); +#205981 = DIRECTION('',(1.,0.,-0.)); +#205982 = SHELL_BASED_SURFACE_MODEL('',(#205983)); +#205983 = OPEN_SHELL('',(#205984)); +#205984 = ADVANCED_FACE('',(#205985),#206054,.T.); +#205985 = FACE_BOUND('',#205986,.F.); +#205986 = EDGE_LOOP('',(#205987,#205998,#206006,#206015,#206023,#206031, + #206040,#206048)); +#205987 = ORIENTED_EDGE('',*,*,#205988,.T.); +#205988 = EDGE_CURVE('',#205989,#205991,#205993,.T.); +#205989 = VERTEX_POINT('',#205990); +#205990 = CARTESIAN_POINT('',(171.014286,-76.474597,1.585)); +#205991 = VERTEX_POINT('',#205992); +#205992 = CARTESIAN_POINT('',(171.014286,-76.344597,1.585)); +#205993 = CIRCLE('',#205994,6.500000000092E-02); +#205994 = AXIS2_PLACEMENT_3D('',#205995,#205996,#205997); +#205995 = CARTESIAN_POINT('',(171.01428634486,-76.409597,1.585)); +#205996 = DIRECTION('',(0.,0.,-1.)); +#205997 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#205998 = ORIENTED_EDGE('',*,*,#205999,.T.); +#205999 = EDGE_CURVE('',#205991,#206000,#206002,.T.); +#206000 = VERTEX_POINT('',#206001); +#206001 = CARTESIAN_POINT('',(171.528572,-76.344597,1.585)); +#206002 = LINE('',#206003,#206004); +#206003 = CARTESIAN_POINT('',(171.014286,-76.344597,1.585)); +#206004 = VECTOR('',#206005,1.); +#206005 = DIRECTION('',(1.,0.,0.)); +#206006 = ORIENTED_EDGE('',*,*,#206007,.T.); +#206007 = EDGE_CURVE('',#206000,#206008,#206010,.T.); +#206008 = VERTEX_POINT('',#206009); +#206009 = CARTESIAN_POINT('',(171.528572,-76.474597,1.585)); +#206010 = CIRCLE('',#206011,6.500000000092E-02); +#206011 = AXIS2_PLACEMENT_3D('',#206012,#206013,#206014); +#206012 = CARTESIAN_POINT('',(171.52857165513,-76.409597,1.585)); +#206013 = DIRECTION('',(0.,0.,-1.)); +#206014 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#206015 = ORIENTED_EDGE('',*,*,#206016,.T.); +#206016 = EDGE_CURVE('',#206008,#206017,#206019,.T.); +#206017 = VERTEX_POINT('',#206018); +#206018 = CARTESIAN_POINT('',(171.336429,-76.474597,1.585)); +#206019 = LINE('',#206020,#206021); +#206020 = CARTESIAN_POINT('',(171.528572,-76.474597,1.585)); +#206021 = VECTOR('',#206022,1.); +#206022 = DIRECTION('',(-1.,0.,0.)); +#206023 = ORIENTED_EDGE('',*,*,#206024,.T.); +#206024 = EDGE_CURVE('',#206017,#206025,#206027,.T.); +#206025 = VERTEX_POINT('',#206026); +#206026 = CARTESIAN_POINT('',(171.336429,-77.309597,1.585)); +#206027 = LINE('',#206028,#206029); +#206028 = CARTESIAN_POINT('',(171.336429,-76.474597,1.585)); +#206029 = VECTOR('',#206030,1.); +#206030 = DIRECTION('',(0.,-1.,0.)); +#206031 = ORIENTED_EDGE('',*,*,#206032,.T.); +#206032 = EDGE_CURVE('',#206025,#206033,#206035,.T.); +#206033 = VERTEX_POINT('',#206034); +#206034 = CARTESIAN_POINT('',(171.206429,-77.309597,1.585)); +#206035 = CIRCLE('',#206036,6.500000000092E-02); +#206036 = AXIS2_PLACEMENT_3D('',#206037,#206038,#206039); +#206037 = CARTESIAN_POINT('',(171.271429,-77.30959665513,1.585)); +#206038 = DIRECTION('',(-0.,0.,-1.)); +#206039 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#206040 = ORIENTED_EDGE('',*,*,#206041,.T.); +#206041 = EDGE_CURVE('',#206033,#206042,#206044,.T.); +#206042 = VERTEX_POINT('',#206043); +#206043 = CARTESIAN_POINT('',(171.206429,-76.474597,1.585)); +#206044 = LINE('',#206045,#206046); +#206045 = CARTESIAN_POINT('',(171.206429,-77.309597,1.585)); +#206046 = VECTOR('',#206047,1.); +#206047 = DIRECTION('',(0.,1.,0.)); +#206048 = ORIENTED_EDGE('',*,*,#206049,.T.); +#206049 = EDGE_CURVE('',#206042,#205989,#206050,.T.); +#206050 = LINE('',#206051,#206052); +#206051 = CARTESIAN_POINT('',(171.206429,-76.474597,1.585)); +#206052 = VECTOR('',#206053,1.); +#206053 = DIRECTION('',(-1.,0.,0.)); +#206054 = PLANE('',#206055); +#206055 = AXIS2_PLACEMENT_3D('',#206056,#206057,#206058); +#206056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206057 = DIRECTION('',(0.,0.,1.)); +#206058 = DIRECTION('',(1.,0.,-0.)); +#206059 = SHELL_BASED_SURFACE_MODEL('',(#206060)); +#206060 = OPEN_SHELL('',(#206061)); +#206061 = ADVANCED_FACE('',(#206062),#206181,.T.); +#206062 = FACE_BOUND('',#206063,.F.); +#206063 = EDGE_LOOP('',(#206064,#206075,#206083,#206092,#206100,#206109, + #206117,#206125,#206133,#206142,#206150,#206158,#206166,#206175)); +#206064 = ORIENTED_EDGE('',*,*,#206065,.T.); +#206065 = EDGE_CURVE('',#206066,#206068,#206070,.T.); +#206066 = VERTEX_POINT('',#206067); +#206067 = CARTESIAN_POINT('',(82.565672,-75.906451,1.585)); +#206068 = VERTEX_POINT('',#206069); +#206069 = CARTESIAN_POINT('',(82.683526,-75.788597,1.585)); +#206070 = CIRCLE('',#206071,0.150002525551); +#206071 = AXIS2_PLACEMENT_3D('',#206072,#206073,#206074); +#206072 = CARTESIAN_POINT('',(82.712791899413,-75.93571689941,1.585)); +#206073 = DIRECTION('',(0.,0.,-1.)); +#206074 = DIRECTION('',(-0.980782815972,0.195102711139,0.)); +#206075 = ORIENTED_EDGE('',*,*,#206076,.T.); +#206076 = EDGE_CURVE('',#206068,#206077,#206079,.T.); +#206077 = VERTEX_POINT('',#206078); +#206078 = CARTESIAN_POINT('',(85.342054,-75.788597,1.585)); +#206079 = LINE('',#206080,#206081); +#206080 = CARTESIAN_POINT('',(82.683526,-75.788597,1.585)); +#206081 = VECTOR('',#206082,1.); +#206082 = DIRECTION('',(1.,0.,0.)); +#206083 = ORIENTED_EDGE('',*,*,#206084,.T.); +#206084 = EDGE_CURVE('',#206077,#206085,#206087,.T.); +#206085 = VERTEX_POINT('',#206086); +#206086 = CARTESIAN_POINT('',(85.459908,-75.906451,1.585)); +#206087 = CIRCLE('',#206088,0.150002525551); +#206088 = AXIS2_PLACEMENT_3D('',#206089,#206090,#206091); +#206089 = CARTESIAN_POINT('',(85.312788100587,-75.93571689941,1.585)); +#206090 = DIRECTION('',(0.,0.,-1.)); +#206091 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#206092 = ORIENTED_EDGE('',*,*,#206093,.T.); +#206093 = EDGE_CURVE('',#206085,#206094,#206096,.T.); +#206094 = VERTEX_POINT('',#206095); +#206095 = CARTESIAN_POINT('',(85.459908,-77.203074,1.585)); +#206096 = LINE('',#206097,#206098); +#206097 = CARTESIAN_POINT('',(85.459908,-75.906451,1.585)); +#206098 = VECTOR('',#206099,1.); +#206099 = DIRECTION('',(0.,-1.,0.)); +#206100 = ORIENTED_EDGE('',*,*,#206101,.T.); +#206101 = EDGE_CURVE('',#206094,#206102,#206104,.T.); +#206102 = VERTEX_POINT('',#206103); +#206103 = CARTESIAN_POINT('',(85.165672,-77.203074,1.585)); +#206104 = CIRCLE('',#206105,0.150000292066); +#206105 = AXIS2_PLACEMENT_3D('',#206106,#206107,#206108); +#206106 = CARTESIAN_POINT('',(85.31279,-77.17381,1.585)); +#206107 = DIRECTION('',(-0.,0.,-1.)); +#206108 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#206109 = ORIENTED_EDGE('',*,*,#206110,.T.); +#206110 = EDGE_CURVE('',#206102,#206111,#206113,.T.); +#206111 = VERTEX_POINT('',#206112); +#206112 = CARTESIAN_POINT('',(85.16279,-76.085715,1.585)); +#206113 = LINE('',#206114,#206115); +#206114 = CARTESIAN_POINT('',(85.165672,-77.203074,1.585)); +#206115 = VECTOR('',#206116,1.); +#206116 = DIRECTION('',(-2.579287778956E-03,0.999996673632,0.)); +#206117 = ORIENTED_EDGE('',*,*,#206118,.T.); +#206118 = EDGE_CURVE('',#206111,#206119,#206121,.T.); +#206119 = VERTEX_POINT('',#206120); +#206120 = CARTESIAN_POINT('',(84.224695,-76.085715,1.585)); +#206121 = LINE('',#206122,#206123); +#206122 = CARTESIAN_POINT('',(85.16279,-76.085715,1.585)); +#206123 = VECTOR('',#206124,1.); +#206124 = DIRECTION('',(-1.,0.,0.)); +#206125 = ORIENTED_EDGE('',*,*,#206126,.T.); +#206126 = EDGE_CURVE('',#206119,#206127,#206129,.T.); +#206127 = VERTEX_POINT('',#206128); +#206128 = CARTESIAN_POINT('',(84.221813,-76.831646,1.585)); +#206129 = LINE('',#206130,#206131); +#206130 = CARTESIAN_POINT('',(84.224695,-76.085715,1.585)); +#206131 = VECTOR('',#206132,1.); +#206132 = DIRECTION('',(-3.863599300118E-03,-0.999992536272,0.)); +#206133 = ORIENTED_EDGE('',*,*,#206134,.T.); +#206134 = EDGE_CURVE('',#206127,#206135,#206137,.T.); +#206135 = VERTEX_POINT('',#206136); +#206136 = CARTESIAN_POINT('',(83.927577,-76.831646,1.585)); +#206137 = CIRCLE('',#206138,0.150000292066); +#206138 = AXIS2_PLACEMENT_3D('',#206139,#206140,#206141); +#206139 = CARTESIAN_POINT('',(84.074695,-76.802382,1.585)); +#206140 = DIRECTION('',(-0.,0.,-1.)); +#206141 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#206142 = ORIENTED_EDGE('',*,*,#206143,.T.); +#206143 = EDGE_CURVE('',#206135,#206144,#206146,.T.); +#206144 = VERTEX_POINT('',#206145); +#206145 = CARTESIAN_POINT('',(83.924695,-76.085715,1.585)); +#206146 = LINE('',#206147,#206148); +#206147 = CARTESIAN_POINT('',(83.927577,-76.831646,1.585)); +#206148 = VECTOR('',#206149,1.); +#206149 = DIRECTION('',(-3.863599300118E-03,0.999992536272,0.)); +#206150 = ORIENTED_EDGE('',*,*,#206151,.T.); +#206151 = EDGE_CURVE('',#206144,#206152,#206154,.T.); +#206152 = VERTEX_POINT('',#206153); +#206153 = CARTESIAN_POINT('',(82.86279,-76.085715,1.585)); +#206154 = LINE('',#206155,#206156); +#206155 = CARTESIAN_POINT('',(83.924695,-76.085715,1.585)); +#206156 = VECTOR('',#206157,1.); +#206157 = DIRECTION('',(-1.,0.,0.)); +#206158 = ORIENTED_EDGE('',*,*,#206159,.T.); +#206159 = EDGE_CURVE('',#206152,#206160,#206162,.T.); +#206160 = VERTEX_POINT('',#206161); +#206161 = CARTESIAN_POINT('',(82.859908,-77.203074,1.585)); +#206162 = LINE('',#206163,#206164); +#206163 = CARTESIAN_POINT('',(82.86279,-76.085715,1.585)); +#206164 = VECTOR('',#206165,1.); +#206165 = DIRECTION('',(-2.579287778956E-03,-0.999996673632,0.)); +#206166 = ORIENTED_EDGE('',*,*,#206167,.T.); +#206167 = EDGE_CURVE('',#206160,#206168,#206170,.T.); +#206168 = VERTEX_POINT('',#206169); +#206169 = CARTESIAN_POINT('',(82.565672,-77.203074,1.585)); +#206170 = CIRCLE('',#206171,0.150000292066); +#206171 = AXIS2_PLACEMENT_3D('',#206172,#206173,#206174); +#206172 = CARTESIAN_POINT('',(82.71279,-77.17381,1.585)); +#206173 = DIRECTION('',(-0.,0.,-1.)); +#206174 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#206175 = ORIENTED_EDGE('',*,*,#206176,.T.); +#206176 = EDGE_CURVE('',#206168,#206066,#206177,.T.); +#206177 = LINE('',#206178,#206179); +#206178 = CARTESIAN_POINT('',(82.565672,-77.203074,1.585)); +#206179 = VECTOR('',#206180,1.); +#206180 = DIRECTION('',(0.,1.,0.)); +#206181 = PLANE('',#206182); +#206182 = AXIS2_PLACEMENT_3D('',#206183,#206184,#206185); +#206183 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206184 = DIRECTION('',(0.,0.,1.)); +#206185 = DIRECTION('',(1.,0.,-0.)); +#206186 = SHELL_BASED_SURFACE_MODEL('',(#206187)); +#206187 = OPEN_SHELL('',(#206188)); +#206188 = ADVANCED_FACE('',(#206189),#206266,.T.); +#206189 = FACE_BOUND('',#206190,.F.); +#206190 = EDGE_LOOP('',(#206191,#206202,#206210,#206218,#206227,#206235, + #206243,#206252,#206260)); +#206191 = ORIENTED_EDGE('',*,*,#206192,.T.); +#206192 = EDGE_CURVE('',#206193,#206195,#206197,.T.); +#206193 = VERTEX_POINT('',#206194); +#206194 = CARTESIAN_POINT('',(132.049545,-76.675126,1.585)); +#206195 = VERTEX_POINT('',#206196); +#206196 = CARTESIAN_POINT('',(132.174597,-76.7,1.585)); +#206197 = CIRCLE('',#206198,6.499988811649E-02); +#206198 = AXIS2_PLACEMENT_3D('',#206199,#206200,#206201); +#206199 = CARTESIAN_POINT('',(132.10959711188,-76.7000002701,1.585)); +#206200 = DIRECTION('',(0.,0.,-1.)); +#206201 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#206202 = ORIENTED_EDGE('',*,*,#206203,.T.); +#206203 = EDGE_CURVE('',#206195,#206204,#206206,.T.); +#206204 = VERTEX_POINT('',#206205); +#206205 = CARTESIAN_POINT('',(132.174597,-76.892142,1.585)); +#206206 = LINE('',#206207,#206208); +#206207 = CARTESIAN_POINT('',(132.174597,-76.7,1.585)); +#206208 = VECTOR('',#206209,1.); +#206209 = DIRECTION('',(0.,-1.,0.)); +#206210 = ORIENTED_EDGE('',*,*,#206211,.T.); +#206211 = EDGE_CURVE('',#206204,#206212,#206214,.T.); +#206212 = VERTEX_POINT('',#206213); +#206213 = CARTESIAN_POINT('',(133.009597,-76.892142,1.585)); +#206214 = LINE('',#206215,#206216); +#206215 = CARTESIAN_POINT('',(132.174597,-76.892142,1.585)); +#206216 = VECTOR('',#206217,1.); +#206217 = DIRECTION('',(1.,0.,0.)); +#206218 = ORIENTED_EDGE('',*,*,#206219,.T.); +#206219 = EDGE_CURVE('',#206212,#206220,#206222,.T.); +#206220 = VERTEX_POINT('',#206221); +#206221 = CARTESIAN_POINT('',(133.009597,-77.022142,1.585)); +#206222 = CIRCLE('',#206223,6.500000000092E-02); +#206223 = AXIS2_PLACEMENT_3D('',#206224,#206225,#206226); +#206224 = CARTESIAN_POINT('',(133.00959665513,-76.957142,1.585)); +#206225 = DIRECTION('',(0.,0.,-1.)); +#206226 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#206227 = ORIENTED_EDGE('',*,*,#206228,.T.); +#206228 = EDGE_CURVE('',#206220,#206229,#206231,.T.); +#206229 = VERTEX_POINT('',#206230); +#206230 = CARTESIAN_POINT('',(132.174597,-77.022142,1.585)); +#206231 = LINE('',#206232,#206233); +#206232 = CARTESIAN_POINT('',(133.009597,-77.022142,1.585)); +#206233 = VECTOR('',#206234,1.); +#206234 = DIRECTION('',(-1.,0.,0.)); +#206235 = ORIENTED_EDGE('',*,*,#206236,.T.); +#206236 = EDGE_CURVE('',#206229,#206237,#206239,.T.); +#206237 = VERTEX_POINT('',#206238); +#206238 = CARTESIAN_POINT('',(132.174597,-77.214285,1.585)); +#206239 = LINE('',#206240,#206241); +#206240 = CARTESIAN_POINT('',(132.174597,-77.022142,1.585)); +#206241 = VECTOR('',#206242,1.); +#206242 = DIRECTION('',(0.,-1.,0.)); +#206243 = ORIENTED_EDGE('',*,*,#206244,.T.); +#206244 = EDGE_CURVE('',#206237,#206245,#206247,.T.); +#206245 = VERTEX_POINT('',#206246); +#206246 = CARTESIAN_POINT('',(132.044597,-77.214285,1.585)); +#206247 = CIRCLE('',#206248,6.500000000091E-02); +#206248 = AXIS2_PLACEMENT_3D('',#206249,#206250,#206251); +#206249 = CARTESIAN_POINT('',(132.109597,-77.21428465513,1.585)); +#206250 = DIRECTION('',(-0.,0.,-1.)); +#206251 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#206252 = ORIENTED_EDGE('',*,*,#206253,.T.); +#206253 = EDGE_CURVE('',#206245,#206254,#206256,.T.); +#206254 = VERTEX_POINT('',#206255); +#206255 = CARTESIAN_POINT('',(132.044597,-76.7,1.585)); +#206256 = LINE('',#206257,#206258); +#206257 = CARTESIAN_POINT('',(132.044597,-77.214285,1.585)); +#206258 = VECTOR('',#206259,1.); +#206259 = DIRECTION('',(0.,1.,0.)); +#206260 = ORIENTED_EDGE('',*,*,#206261,.T.); +#206261 = EDGE_CURVE('',#206254,#206193,#206262,.T.); +#206262 = LINE('',#206263,#206264); +#206263 = CARTESIAN_POINT('',(132.044597,-76.7,1.585)); +#206264 = VECTOR('',#206265,1.); +#206265 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#206266 = PLANE('',#206267); +#206267 = AXIS2_PLACEMENT_3D('',#206268,#206269,#206270); +#206268 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206269 = DIRECTION('',(0.,0.,1.)); +#206270 = DIRECTION('',(1.,0.,-0.)); +#206271 = SHELL_BASED_SURFACE_MODEL('',(#206272)); +#206272 = OPEN_SHELL('',(#206273)); +#206273 = ADVANCED_FACE('',(#206274),#206351,.T.); +#206274 = FACE_BOUND('',#206275,.F.); +#206275 = EDGE_LOOP('',(#206276,#206287,#206295,#206304,#206312,#206321, + #206329,#206337,#206345)); +#206276 = ORIENTED_EDGE('',*,*,#206277,.T.); +#206277 = EDGE_CURVE('',#206278,#206280,#206282,.T.); +#206278 = VERTEX_POINT('',#206279); +#206279 = CARTESIAN_POINT('',(154.894761,-76.604606,1.585)); +#206280 = VERTEX_POINT('',#206281); +#206281 = CARTESIAN_POINT('',(154.980152,-76.538335,1.585)); +#206282 = CIRCLE('',#206283,6.499990070439E-02); +#206283 = AXIS2_PLACEMENT_3D('',#206284,#206285,#206286); +#206284 = CARTESIAN_POINT('',(154.95959745813,-76.59999939734,1.585)); +#206285 = DIRECTION('',(0.,0.,-1.)); +#206286 = DIRECTION('',(-0.997485495103,-7.08709182902E-02,-0.)); +#206287 = ORIENTED_EDGE('',*,*,#206288,.T.); +#206288 = EDGE_CURVE('',#206280,#206289,#206291,.T.); +#206289 = VERTEX_POINT('',#206290); +#206290 = CARTESIAN_POINT('',(155.880152,-76.838334,1.585)); +#206291 = LINE('',#206292,#206293); +#206292 = CARTESIAN_POINT('',(154.980152,-76.538335,1.585)); +#206293 = VECTOR('',#206294,1.); +#206294 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#206295 = ORIENTED_EDGE('',*,*,#206296,.T.); +#206296 = EDGE_CURVE('',#206289,#206297,#206299,.T.); +#206297 = VERTEX_POINT('',#206298); +#206298 = CARTESIAN_POINT('',(155.880152,-76.961664,1.585)); +#206299 = CIRCLE('',#206300,6.500111611218E-02); +#206300 = AXIS2_PLACEMENT_3D('',#206301,#206302,#206303); +#206301 = CARTESIAN_POINT('',(155.85959542268,-76.899999,1.585)); +#206302 = DIRECTION('',(0.,0.,-1.)); +#206303 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#206304 = ORIENTED_EDGE('',*,*,#206305,.T.); +#206305 = EDGE_CURVE('',#206297,#206306,#206308,.T.); +#206306 = VERTEX_POINT('',#206307); +#206307 = CARTESIAN_POINT('',(154.980152,-77.261663,1.585)); +#206308 = LINE('',#206309,#206310); +#206309 = CARTESIAN_POINT('',(155.880152,-76.961664,1.585)); +#206310 = VECTOR('',#206311,1.); +#206311 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#206312 = ORIENTED_EDGE('',*,*,#206313,.T.); +#206313 = EDGE_CURVE('',#206306,#206314,#206316,.T.); +#206314 = VERTEX_POINT('',#206315); +#206315 = CARTESIAN_POINT('',(154.939042,-77.138335,1.585)); +#206316 = CIRCLE('',#206317,6.499966862238E-02); +#206317 = AXIS2_PLACEMENT_3D('',#206318,#206319,#206320); +#206318 = CARTESIAN_POINT('',(154.95959712923,-77.19999895692,1.585)); +#206319 = DIRECTION('',(0.,0.,-1.)); +#206320 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#206321 = ORIENTED_EDGE('',*,*,#206322,.T.); +#206322 = EDGE_CURVE('',#206314,#206323,#206325,.T.); +#206323 = VERTEX_POINT('',#206324); +#206324 = CARTESIAN_POINT('',(155.65405,-76.899999,1.585)); +#206325 = LINE('',#206326,#206327); +#206326 = CARTESIAN_POINT('',(154.939042,-77.138335,1.585)); +#206327 = VECTOR('',#206328,1.); +#206328 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#206329 = ORIENTED_EDGE('',*,*,#206330,.T.); +#206330 = EDGE_CURVE('',#206323,#206331,#206333,.T.); +#206331 = VERTEX_POINT('',#206332); +#206332 = CARTESIAN_POINT('',(154.939042,-76.661663,1.585)); +#206333 = LINE('',#206334,#206335); +#206334 = CARTESIAN_POINT('',(155.65405,-76.899999,1.585)); +#206335 = VECTOR('',#206336,1.); +#206336 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#206337 = ORIENTED_EDGE('',*,*,#206338,.T.); +#206338 = EDGE_CURVE('',#206331,#206339,#206341,.T.); +#206339 = VERTEX_POINT('',#206340); +#206340 = CARTESIAN_POINT('',(154.917009,-76.649103,1.585)); +#206341 = LINE('',#206342,#206343); +#206342 = CARTESIAN_POINT('',(154.939042,-76.661663,1.585)); +#206343 = VECTOR('',#206344,1.); +#206344 = DIRECTION('',(-0.868757082858,0.495238458708,0.)); +#206345 = ORIENTED_EDGE('',*,*,#206346,.T.); +#206346 = EDGE_CURVE('',#206339,#206278,#206347,.T.); +#206347 = LINE('',#206348,#206349); +#206348 = CARTESIAN_POINT('',(154.917009,-76.649103,1.585)); +#206349 = VECTOR('',#206350,1.); +#206350 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#206351 = PLANE('',#206352); +#206352 = AXIS2_PLACEMENT_3D('',#206353,#206354,#206355); +#206353 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206354 = DIRECTION('',(0.,0.,1.)); +#206355 = DIRECTION('',(1.,0.,-0.)); +#206356 = SHELL_BASED_SURFACE_MODEL('',(#206357)); +#206357 = OPEN_SHELL('',(#206358)); +#206358 = ADVANCED_FACE('',(#206359),#206452,.T.); +#206359 = FACE_BOUND('',#206360,.F.); +#206360 = EDGE_LOOP('',(#206361,#206372,#206380,#206388,#206397,#206405, + #206413,#206422,#206430,#206438,#206446)); +#206361 = ORIENTED_EDGE('',*,*,#206362,.T.); +#206362 = EDGE_CURVE('',#206363,#206365,#206367,.T.); +#206363 = VERTEX_POINT('',#206364); +#206364 = CARTESIAN_POINT('',(137.115579,-76.588744,1.585)); +#206365 = VERTEX_POINT('',#206366); +#206366 = CARTESIAN_POINT('',(137.214494,-76.545161,1.585)); +#206367 = CIRCLE('',#206368,6.500030228282E-02); +#206368 = AXIS2_PLACEMENT_3D('',#206369,#206370,#206371); +#206369 = CARTESIAN_POINT('',(137.17959737432,-76.59999953401,1.585)); +#206370 = DIRECTION('',(0.,0.,-1.)); +#206371 = DIRECTION('',(-0.984893486242,0.173161256516,0.)); +#206372 = ORIENTED_EDGE('',*,*,#206373,.T.); +#206373 = EDGE_CURVE('',#206365,#206374,#206376,.T.); +#206374 = VERTEX_POINT('',#206375); +#206375 = CARTESIAN_POINT('',(137.669953,-76.834999,1.585)); +#206376 = LINE('',#206377,#206378); +#206377 = CARTESIAN_POINT('',(137.214494,-76.545161,1.585)); +#206378 = VECTOR('',#206379,1.); +#206379 = DIRECTION('',(0.843661106369,-0.536876091477,0.)); +#206380 = ORIENTED_EDGE('',*,*,#206381,.T.); +#206381 = EDGE_CURVE('',#206374,#206382,#206384,.T.); +#206382 = VERTEX_POINT('',#206383); +#206383 = CARTESIAN_POINT('',(138.079597,-76.834999,1.585)); +#206384 = LINE('',#206385,#206386); +#206385 = CARTESIAN_POINT('',(137.669953,-76.834999,1.585)); +#206386 = VECTOR('',#206387,1.); +#206387 = DIRECTION('',(1.,0.,0.)); +#206388 = ORIENTED_EDGE('',*,*,#206389,.T.); +#206389 = EDGE_CURVE('',#206382,#206390,#206392,.T.); +#206390 = VERTEX_POINT('',#206391); +#206391 = CARTESIAN_POINT('',(138.079597,-76.964999,1.585)); +#206392 = CIRCLE('',#206393,6.500000000092E-02); +#206393 = AXIS2_PLACEMENT_3D('',#206394,#206395,#206396); +#206394 = CARTESIAN_POINT('',(138.07959665513,-76.899999,1.585)); +#206395 = DIRECTION('',(0.,0.,-1.)); +#206396 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#206397 = ORIENTED_EDGE('',*,*,#206398,.T.); +#206398 = EDGE_CURVE('',#206390,#206399,#206401,.T.); +#206399 = VERTEX_POINT('',#206400); +#206400 = CARTESIAN_POINT('',(137.669953,-76.964999,1.585)); +#206401 = LINE('',#206402,#206403); +#206402 = CARTESIAN_POINT('',(138.079597,-76.964999,1.585)); +#206403 = VECTOR('',#206404,1.); +#206404 = DIRECTION('',(-1.,0.,0.)); +#206405 = ORIENTED_EDGE('',*,*,#206406,.T.); +#206406 = EDGE_CURVE('',#206399,#206407,#206409,.T.); +#206407 = VERTEX_POINT('',#206408); +#206408 = CARTESIAN_POINT('',(137.214494,-77.254837,1.585)); +#206409 = LINE('',#206410,#206411); +#206410 = CARTESIAN_POINT('',(137.669953,-76.964999,1.585)); +#206411 = VECTOR('',#206412,1.); +#206412 = DIRECTION('',(-0.84366110637,-0.536876091477,0.)); +#206413 = ORIENTED_EDGE('',*,*,#206414,.T.); +#206414 = EDGE_CURVE('',#206407,#206415,#206417,.T.); +#206415 = VERTEX_POINT('',#206416); +#206416 = CARTESIAN_POINT('',(137.1447,-77.145161,1.585)); +#206417 = CIRCLE('',#206418,6.500005271614E-02); +#206418 = AXIS2_PLACEMENT_3D('',#206419,#206420,#206421); +#206419 = CARTESIAN_POINT('',(137.179597269,-77.19999882881,1.585)); +#206420 = DIRECTION('',(0.,0.,-1.)); +#206421 = DIRECTION('',(0.536872349088,-0.843663487882,0.)); +#206422 = ORIENTED_EDGE('',*,*,#206423,.T.); +#206423 = EDGE_CURVE('',#206415,#206424,#206426,.T.); +#206424 = VERTEX_POINT('',#206425); +#206425 = CARTESIAN_POINT('',(137.529954,-76.899999,1.585)); +#206426 = LINE('',#206427,#206428); +#206427 = CARTESIAN_POINT('',(137.1447,-77.145161,1.585)); +#206428 = VECTOR('',#206429,1.); +#206429 = DIRECTION('',(0.843661127045,0.536876058986,0.)); +#206430 = ORIENTED_EDGE('',*,*,#206431,.T.); +#206431 = EDGE_CURVE('',#206424,#206432,#206434,.T.); +#206432 = VERTEX_POINT('',#206433); +#206433 = CARTESIAN_POINT('',(137.1447,-76.654837,1.585)); +#206434 = LINE('',#206435,#206436); +#206435 = CARTESIAN_POINT('',(137.529954,-76.899999,1.585)); +#206436 = VECTOR('',#206437,1.); +#206437 = DIRECTION('',(-0.843661127045,0.536876058986,0.)); +#206438 = ORIENTED_EDGE('',*,*,#206439,.T.); +#206439 = EDGE_CURVE('',#206432,#206440,#206442,.T.); +#206440 = VERTEX_POINT('',#206441); +#206441 = CARTESIAN_POINT('',(137.126371,-76.637308,1.585)); +#206442 = LINE('',#206443,#206444); +#206443 = CARTESIAN_POINT('',(137.1447,-76.654837,1.585)); +#206444 = VECTOR('',#206445,1.); +#206445 = DIRECTION('',(-0.722702652796,0.691159081284,0.)); +#206446 = ORIENTED_EDGE('',*,*,#206447,.T.); +#206447 = EDGE_CURVE('',#206440,#206363,#206448,.T.); +#206448 = LINE('',#206449,#206450); +#206449 = CARTESIAN_POINT('',(137.126371,-76.637308,1.585)); +#206450 = VECTOR('',#206451,1.); +#206451 = DIRECTION('',(-0.216930457819,0.976187060184,0.)); +#206452 = PLANE('',#206453); +#206453 = AXIS2_PLACEMENT_3D('',#206454,#206455,#206456); +#206454 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206455 = DIRECTION('',(0.,0.,1.)); +#206456 = DIRECTION('',(1.,0.,-0.)); +#206457 = SHELL_BASED_SURFACE_MODEL('',(#206458)); +#206458 = OPEN_SHELL('',(#206459)); +#206459 = ADVANCED_FACE('',(#206460,#206594),#206653,.T.); +#206460 = FACE_BOUND('',#206461,.F.); +#206461 = EDGE_LOOP('',(#206462,#206473,#206481,#206489,#206497,#206505, + #206513,#206522,#206530,#206538,#206546,#206555,#206563,#206572, + #206580,#206588)); +#206462 = ORIENTED_EDGE('',*,*,#206463,.T.); +#206463 = EDGE_CURVE('',#206464,#206466,#206468,.T.); +#206464 = VERTEX_POINT('',#206465); +#206465 = CARTESIAN_POINT('',(121.958013,-76.662533,1.585)); +#206466 = VERTEX_POINT('',#206467); +#206467 = CARTESIAN_POINT('',(122.238666,-76.61329,1.585)); +#206468 = CIRCLE('',#206469,0.327183487819); +#206469 = AXIS2_PLACEMENT_3D('',#206470,#206471,#206472); +#206470 = CARTESIAN_POINT('',(122.14924076591,-76.92801553472,1.585)); +#206471 = DIRECTION('',(0.,0.,-1.)); +#206472 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#206473 = ORIENTED_EDGE('',*,*,#206474,.T.); +#206474 = EDGE_CURVE('',#206466,#206475,#206477,.T.); +#206475 = VERTEX_POINT('',#206476); +#206476 = CARTESIAN_POINT('',(122.341273,-76.668323,1.585)); +#206477 = LINE('',#206478,#206479); +#206478 = CARTESIAN_POINT('',(122.238666,-76.61329,1.585)); +#206479 = VECTOR('',#206480,1.); +#206480 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#206481 = ORIENTED_EDGE('',*,*,#206482,.T.); +#206482 = EDGE_CURVE('',#206475,#206483,#206485,.T.); +#206483 = VERTEX_POINT('',#206484); +#206484 = CARTESIAN_POINT('',(122.396306,-76.728073,1.585)); +#206485 = LINE('',#206486,#206487); +#206486 = CARTESIAN_POINT('',(122.341273,-76.668323,1.585)); +#206487 = VECTOR('',#206488,1.); +#206488 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#206489 = ORIENTED_EDGE('',*,*,#206490,.T.); +#206490 = EDGE_CURVE('',#206483,#206491,#206493,.T.); +#206491 = VERTEX_POINT('',#206492); +#206492 = CARTESIAN_POINT('',(122.443109,-76.8282,1.585)); +#206493 = LINE('',#206494,#206495); +#206494 = CARTESIAN_POINT('',(122.396306,-76.728073,1.585)); +#206495 = VECTOR('',#206496,1.); +#206496 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#206497 = ORIENTED_EDGE('',*,*,#206498,.T.); +#206498 = EDGE_CURVE('',#206491,#206499,#206501,.T.); +#206499 = VERTEX_POINT('',#206500); +#206500 = CARTESIAN_POINT('',(122.446025,-76.846585,1.585)); +#206501 = LINE('',#206502,#206503); +#206502 = CARTESIAN_POINT('',(122.443109,-76.8282,1.585)); +#206503 = VECTOR('',#206504,1.); +#206504 = DIRECTION('',(0.156649434209,-0.987654268842,0.)); +#206505 = ORIENTED_EDGE('',*,*,#206506,.T.); +#206506 = EDGE_CURVE('',#206499,#206507,#206509,.T.); +#206507 = VERTEX_POINT('',#206508); +#206508 = CARTESIAN_POINT('',(122.772322,-76.618178,1.585)); +#206509 = LINE('',#206510,#206511); +#206510 = CARTESIAN_POINT('',(122.446025,-76.846585,1.585)); +#206511 = VECTOR('',#206512,1.); +#206512 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#206513 = ORIENTED_EDGE('',*,*,#206514,.T.); +#206514 = EDGE_CURVE('',#206507,#206515,#206517,.T.); +#206515 = VERTEX_POINT('',#206516); +#206516 = CARTESIAN_POINT('',(122.846872,-76.724678,1.585)); +#206517 = CIRCLE('',#206518,6.499990865384E-02); +#206518 = AXIS2_PLACEMENT_3D('',#206519,#206520,#206521); +#206519 = CARTESIAN_POINT('',(122.80959707222,-76.67142794944,1.585)); +#206520 = DIRECTION('',(0.,0.,-1.)); +#206521 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#206522 = ORIENTED_EDGE('',*,*,#206523,.T.); +#206523 = EDGE_CURVE('',#206515,#206524,#206526,.T.); +#206524 = VERTEX_POINT('',#206525); +#206525 = CARTESIAN_POINT('',(122.446025,-77.00527,1.585)); +#206526 = LINE('',#206527,#206528); +#206527 = CARTESIAN_POINT('',(122.846872,-76.724678,1.585)); +#206528 = VECTOR('',#206529,1.); +#206529 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#206530 = ORIENTED_EDGE('',*,*,#206531,.T.); +#206531 = EDGE_CURVE('',#206524,#206532,#206534,.T.); +#206532 = VERTEX_POINT('',#206533); +#206533 = CARTESIAN_POINT('',(122.446025,-77.120714,1.585)); +#206534 = LINE('',#206535,#206536); +#206535 = CARTESIAN_POINT('',(122.446025,-77.00527,1.585)); +#206536 = VECTOR('',#206537,1.); +#206537 = DIRECTION('',(0.,-1.,0.)); +#206538 = ORIENTED_EDGE('',*,*,#206539,.T.); +#206539 = EDGE_CURVE('',#206532,#206540,#206542,.T.); +#206540 = VERTEX_POINT('',#206541); +#206541 = CARTESIAN_POINT('',(122.809597,-77.120714,1.585)); +#206542 = LINE('',#206543,#206544); +#206543 = CARTESIAN_POINT('',(122.446025,-77.120714,1.585)); +#206544 = VECTOR('',#206545,1.); +#206545 = DIRECTION('',(1.,0.,0.)); +#206546 = ORIENTED_EDGE('',*,*,#206547,.T.); +#206547 = EDGE_CURVE('',#206540,#206548,#206550,.T.); +#206548 = VERTEX_POINT('',#206549); +#206549 = CARTESIAN_POINT('',(122.809597,-77.250714,1.585)); +#206550 = CIRCLE('',#206551,6.500000000092E-02); +#206551 = AXIS2_PLACEMENT_3D('',#206552,#206553,#206554); +#206552 = CARTESIAN_POINT('',(122.80959665513,-77.185714,1.585)); +#206553 = DIRECTION('',(0.,0.,-1.)); +#206554 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#206555 = ORIENTED_EDGE('',*,*,#206556,.T.); +#206556 = EDGE_CURVE('',#206548,#206557,#206559,.T.); +#206557 = VERTEX_POINT('',#206558); +#206558 = CARTESIAN_POINT('',(121.909597,-77.250714,1.585)); +#206559 = LINE('',#206560,#206561); +#206560 = CARTESIAN_POINT('',(122.809597,-77.250714,1.585)); +#206561 = VECTOR('',#206562,1.); +#206562 = DIRECTION('',(-1.,0.,0.)); +#206563 = ORIENTED_EDGE('',*,*,#206564,.T.); +#206564 = EDGE_CURVE('',#206557,#206565,#206567,.T.); +#206565 = VERTEX_POINT('',#206566); +#206566 = CARTESIAN_POINT('',(121.844597,-77.185714,1.585)); +#206567 = CIRCLE('',#206568,6.500103935388E-02); +#206568 = AXIS2_PLACEMENT_3D('',#206569,#206570,#206571); +#206569 = CARTESIAN_POINT('',(121.90959803934,-77.18571296065,1.585)); +#206570 = DIRECTION('',(0.,0.,-1.)); +#206571 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#206572 = ORIENTED_EDGE('',*,*,#206573,.T.); +#206573 = EDGE_CURVE('',#206565,#206574,#206576,.T.); +#206574 = VERTEX_POINT('',#206575); +#206575 = CARTESIAN_POINT('',(121.847512,-76.8282,1.585)); +#206576 = LINE('',#206577,#206578); +#206577 = CARTESIAN_POINT('',(121.844597,-77.185714,1.585)); +#206578 = VECTOR('',#206579,1.); +#206579 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#206580 = ORIENTED_EDGE('',*,*,#206581,.T.); +#206581 = EDGE_CURVE('',#206574,#206582,#206584,.T.); +#206582 = VERTEX_POINT('',#206583); +#206583 = CARTESIAN_POINT('',(121.900702,-76.719844,1.585)); +#206584 = LINE('',#206585,#206586); +#206585 = CARTESIAN_POINT('',(121.847512,-76.8282,1.585)); +#206586 = VECTOR('',#206587,1.); +#206587 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#206588 = ORIENTED_EDGE('',*,*,#206589,.T.); +#206589 = EDGE_CURVE('',#206582,#206464,#206590,.T.); +#206590 = LINE('',#206591,#206592); +#206591 = CARTESIAN_POINT('',(121.900702,-76.719844,1.585)); +#206592 = VECTOR('',#206593,1.); +#206593 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206594 = FACE_BOUND('',#206595,.F.); +#206595 = EDGE_LOOP('',(#206596,#206607,#206615,#206623,#206631,#206639, + #206647)); +#206596 = ORIENTED_EDGE('',*,*,#206597,.T.); +#206597 = EDGE_CURVE('',#206598,#206600,#206602,.T.); +#206598 = VERTEX_POINT('',#206599); +#206599 = CARTESIAN_POINT('',(122.256808,-76.767706,1.585)); +#206600 = VERTEX_POINT('',#206601); +#206601 = CARTESIAN_POINT('',(122.005875,-76.795644,1.585)); +#206602 = CIRCLE('',#206603,0.180979134862); +#206603 = AXIS2_PLACEMENT_3D('',#206604,#206605,#206606); +#206604 = CARTESIAN_POINT('',(122.14569076987,-76.91055700078,1.585)); +#206605 = DIRECTION('',(0.,0.,1.)); +#206606 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#206607 = ORIENTED_EDGE('',*,*,#206608,.T.); +#206608 = EDGE_CURVE('',#206600,#206609,#206611,.T.); +#206609 = VERTEX_POINT('',#206610); +#206610 = CARTESIAN_POINT('',(121.974597,-76.858201,1.585)); +#206611 = LINE('',#206612,#206613); +#206612 = CARTESIAN_POINT('',(122.005875,-76.795644,1.585)); +#206613 = VECTOR('',#206614,1.); +#206614 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#206615 = ORIENTED_EDGE('',*,*,#206616,.T.); +#206616 = EDGE_CURVE('',#206609,#206617,#206619,.T.); +#206617 = VERTEX_POINT('',#206618); +#206618 = CARTESIAN_POINT('',(121.974597,-77.120714,1.585)); +#206619 = LINE('',#206620,#206621); +#206620 = CARTESIAN_POINT('',(121.974597,-76.858201,1.585)); +#206621 = VECTOR('',#206622,1.); +#206622 = DIRECTION('',(0.,-1.,0.)); +#206623 = ORIENTED_EDGE('',*,*,#206624,.T.); +#206624 = EDGE_CURVE('',#206617,#206625,#206627,.T.); +#206625 = VERTEX_POINT('',#206626); +#206626 = CARTESIAN_POINT('',(122.316025,-77.120714,1.585)); +#206627 = LINE('',#206628,#206629); +#206628 = CARTESIAN_POINT('',(121.974597,-77.120714,1.585)); +#206629 = VECTOR('',#206630,1.); +#206630 = DIRECTION('',(1.,0.,0.)); +#206631 = ORIENTED_EDGE('',*,*,#206632,.T.); +#206632 = EDGE_CURVE('',#206625,#206633,#206635,.T.); +#206633 = VERTEX_POINT('',#206634); +#206634 = CARTESIAN_POINT('',(122.316025,-76.858201,1.585)); +#206635 = LINE('',#206636,#206637); +#206636 = CARTESIAN_POINT('',(122.316025,-77.120714,1.585)); +#206637 = VECTOR('',#206638,1.); +#206638 = DIRECTION('',(0.,1.,0.)); +#206639 = ORIENTED_EDGE('',*,*,#206640,.T.); +#206640 = EDGE_CURVE('',#206633,#206641,#206643,.T.); +#206641 = VERTEX_POINT('',#206642); +#206642 = CARTESIAN_POINT('',(122.284746,-76.795644,1.585)); +#206643 = LINE('',#206644,#206645); +#206644 = CARTESIAN_POINT('',(122.316025,-76.858201,1.585)); +#206645 = VECTOR('',#206646,1.); +#206646 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#206647 = ORIENTED_EDGE('',*,*,#206648,.T.); +#206648 = EDGE_CURVE('',#206641,#206598,#206649,.T.); +#206649 = LINE('',#206650,#206651); +#206650 = CARTESIAN_POINT('',(122.284746,-76.795644,1.585)); +#206651 = VECTOR('',#206652,1.); +#206652 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206653 = PLANE('',#206654); +#206654 = AXIS2_PLACEMENT_3D('',#206655,#206656,#206657); +#206655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206656 = DIRECTION('',(0.,0.,1.)); +#206657 = DIRECTION('',(1.,0.,-0.)); +#206658 = SHELL_BASED_SURFACE_MODEL('',(#206659)); +#206659 = OPEN_SHELL('',(#206660)); +#206660 = ADVANCED_FACE('',(#206661),#206763,.T.); +#206661 = FACE_BOUND('',#206662,.F.); +#206662 = EDGE_LOOP('',(#206663,#206673,#206682,#206690,#206698,#206707, + #206715,#206723,#206732,#206740,#206748,#206757)); +#206663 = ORIENTED_EDGE('',*,*,#206664,.T.); +#206664 = EDGE_CURVE('',#206665,#206667,#206669,.T.); +#206665 = VERTEX_POINT('',#206666); +#206666 = CARTESIAN_POINT('',(128.909596,-76.793307,1.585)); +#206667 = VERTEX_POINT('',#206668); +#206668 = CARTESIAN_POINT('',(129.323541,-76.517345,1.585)); +#206669 = LINE('',#206670,#206671); +#206670 = CARTESIAN_POINT('',(128.909596,-76.793307,1.585)); +#206671 = VECTOR('',#206672,1.); +#206672 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#206673 = ORIENTED_EDGE('',*,*,#206674,.T.); +#206674 = EDGE_CURVE('',#206667,#206675,#206677,.T.); +#206675 = VERTEX_POINT('',#206676); +#206676 = CARTESIAN_POINT('',(129.395652,-76.625511,1.585)); +#206677 = CIRCLE('',#206678,6.499976899535E-02); +#206678 = AXIS2_PLACEMENT_3D('',#206679,#206680,#206681); +#206679 = CARTESIAN_POINT('',(129.35959612917,-76.57142824722,1.585)); +#206680 = DIRECTION('',(0.,0.,-1.)); +#206681 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#206682 = ORIENTED_EDGE('',*,*,#206683,.T.); +#206683 = EDGE_CURVE('',#206675,#206684,#206686,.T.); +#206684 = VERTEX_POINT('',#206685); +#206685 = CARTESIAN_POINT('',(129.026776,-76.871428,1.585)); +#206686 = LINE('',#206687,#206688); +#206687 = CARTESIAN_POINT('',(129.395652,-76.625511,1.585)); +#206688 = VECTOR('',#206689,1.); +#206689 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#206690 = ORIENTED_EDGE('',*,*,#206691,.T.); +#206691 = EDGE_CURVE('',#206684,#206692,#206694,.T.); +#206692 = VERTEX_POINT('',#206693); +#206693 = CARTESIAN_POINT('',(129.395652,-77.117345,1.585)); +#206694 = LINE('',#206695,#206696); +#206695 = CARTESIAN_POINT('',(129.026776,-76.871428,1.585)); +#206696 = VECTOR('',#206697,1.); +#206697 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#206698 = ORIENTED_EDGE('',*,*,#206699,.T.); +#206699 = EDGE_CURVE('',#206692,#206700,#206702,.T.); +#206700 = VERTEX_POINT('',#206701); +#206701 = CARTESIAN_POINT('',(129.323541,-77.225511,1.585)); +#206702 = CIRCLE('',#206703,6.499976899541E-02); +#206703 = AXIS2_PLACEMENT_3D('',#206704,#206705,#206706); +#206704 = CARTESIAN_POINT('',(129.35959687747,-77.17142825164,1.585)); +#206705 = DIRECTION('',(0.,0.,-1.)); +#206706 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#206707 = ORIENTED_EDGE('',*,*,#206708,.T.); +#206708 = EDGE_CURVE('',#206700,#206709,#206711,.T.); +#206709 = VERTEX_POINT('',#206710); +#206710 = CARTESIAN_POINT('',(128.909596,-76.949548,1.585)); +#206711 = LINE('',#206712,#206713); +#206712 = CARTESIAN_POINT('',(129.323541,-77.225511,1.585)); +#206713 = VECTOR('',#206714,1.); +#206714 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#206715 = ORIENTED_EDGE('',*,*,#206716,.T.); +#206716 = EDGE_CURVE('',#206709,#206717,#206719,.T.); +#206717 = VERTEX_POINT('',#206718); +#206718 = CARTESIAN_POINT('',(128.495653,-77.225511,1.585)); +#206719 = LINE('',#206720,#206721); +#206720 = CARTESIAN_POINT('',(128.909596,-76.949548,1.585)); +#206721 = VECTOR('',#206722,1.); +#206722 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#206723 = ORIENTED_EDGE('',*,*,#206724,.T.); +#206724 = EDGE_CURVE('',#206717,#206725,#206727,.T.); +#206725 = VERTEX_POINT('',#206726); +#206726 = CARTESIAN_POINT('',(128.423541,-77.117345,1.585)); +#206727 = CIRCLE('',#206728,6.500004634766E-02); +#206728 = AXIS2_PLACEMENT_3D('',#206729,#206730,#206731); +#206729 = CARTESIAN_POINT('',(128.45959737004,-77.1714277533,1.585)); +#206730 = DIRECTION('',(0.,0.,-1.)); +#206731 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#206732 = ORIENTED_EDGE('',*,*,#206733,.T.); +#206733 = EDGE_CURVE('',#206725,#206734,#206736,.T.); +#206734 = VERTEX_POINT('',#206735); +#206735 = CARTESIAN_POINT('',(128.792416,-76.871428,1.585)); +#206736 = LINE('',#206737,#206738); +#206737 = CARTESIAN_POINT('',(128.423541,-77.117345,1.585)); +#206738 = VECTOR('',#206739,1.); +#206739 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#206740 = ORIENTED_EDGE('',*,*,#206741,.T.); +#206741 = EDGE_CURVE('',#206734,#206742,#206744,.T.); +#206742 = VERTEX_POINT('',#206743); +#206743 = CARTESIAN_POINT('',(128.423541,-76.625511,1.585)); +#206744 = LINE('',#206745,#206746); +#206745 = CARTESIAN_POINT('',(128.792416,-76.871428,1.585)); +#206746 = VECTOR('',#206747,1.); +#206747 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#206748 = ORIENTED_EDGE('',*,*,#206749,.T.); +#206749 = EDGE_CURVE('',#206742,#206750,#206752,.T.); +#206750 = VERTEX_POINT('',#206751); +#206751 = CARTESIAN_POINT('',(128.495653,-76.517345,1.585)); +#206752 = CIRCLE('',#206753,6.500004634723E-02); +#206753 = AXIS2_PLACEMENT_3D('',#206754,#206755,#206756); +#206754 = CARTESIAN_POINT('',(128.45959731405,-76.57142820937,1.585)); +#206755 = DIRECTION('',(0.,0.,-1.)); +#206756 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#206757 = ORIENTED_EDGE('',*,*,#206758,.T.); +#206758 = EDGE_CURVE('',#206750,#206665,#206759,.T.); +#206759 = LINE('',#206760,#206761); +#206760 = CARTESIAN_POINT('',(128.495653,-76.517345,1.585)); +#206761 = VECTOR('',#206762,1.); +#206762 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#206763 = PLANE('',#206764); +#206764 = AXIS2_PLACEMENT_3D('',#206765,#206766,#206767); +#206765 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206766 = DIRECTION('',(0.,0.,1.)); +#206767 = DIRECTION('',(1.,0.,-0.)); +#206768 = SHELL_BASED_SURFACE_MODEL('',(#206769)); +#206769 = OPEN_SHELL('',(#206770)); +#206770 = ADVANCED_FACE('',(#206771),#206857,.T.); +#206771 = FACE_BOUND('',#206772,.F.); +#206772 = EDGE_LOOP('',(#206773,#206784,#206792,#206801,#206809,#206817, + #206826,#206834,#206843,#206851)); +#206773 = ORIENTED_EDGE('',*,*,#206774,.T.); +#206774 = EDGE_CURVE('',#206775,#206777,#206779,.T.); +#206775 = VERTEX_POINT('',#206776); +#206776 = CARTESIAN_POINT('',(152.419597,-76.707856,1.585)); +#206777 = VERTEX_POINT('',#206778); +#206778 = CARTESIAN_POINT('',(152.419597,-76.577856,1.585)); +#206779 = CIRCLE('',#206780,6.500000000091E-02); +#206780 = AXIS2_PLACEMENT_3D('',#206781,#206782,#206783); +#206781 = CARTESIAN_POINT('',(152.41959734486,-76.642856,1.585)); +#206782 = DIRECTION('',(0.,0.,-1.)); +#206783 = DIRECTION('',(-5.30565758841E-06,-0.999999999986,-0.)); +#206784 = ORIENTED_EDGE('',*,*,#206785,.T.); +#206785 = EDGE_CURVE('',#206777,#206786,#206788,.T.); +#206786 = VERTEX_POINT('',#206787); +#206787 = CARTESIAN_POINT('',(153.319597,-76.577856,1.585)); +#206788 = LINE('',#206789,#206790); +#206789 = CARTESIAN_POINT('',(152.419597,-76.577856,1.585)); +#206790 = VECTOR('',#206791,1.); +#206791 = DIRECTION('',(1.,0.,0.)); +#206792 = ORIENTED_EDGE('',*,*,#206793,.T.); +#206793 = EDGE_CURVE('',#206786,#206794,#206796,.T.); +#206794 = VERTEX_POINT('',#206795); +#206795 = CARTESIAN_POINT('',(153.351846,-76.699292,1.585)); +#206796 = CIRCLE('',#206797,6.500021194141E-02); +#206797 = AXIS2_PLACEMENT_3D('',#206798,#206799,#206800); +#206798 = CARTESIAN_POINT('',(153.31959651351,-76.64285621194,1.585)); +#206799 = DIRECTION('',(0.,0.,-1.)); +#206800 = DIRECTION('',(7.484332115463E-06,0.999999999972,0.)); +#206801 = ORIENTED_EDGE('',*,*,#206802,.T.); +#206802 = EDGE_CURVE('',#206794,#206803,#206805,.T.); +#206803 = VERTEX_POINT('',#206804); +#206804 = CARTESIAN_POINT('',(152.664359,-77.092142,1.585)); +#206805 = LINE('',#206806,#206807); +#206806 = CARTESIAN_POINT('',(153.351846,-76.699292,1.585)); +#206807 = VECTOR('',#206808,1.); +#206808 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#206809 = ORIENTED_EDGE('',*,*,#206810,.T.); +#206810 = EDGE_CURVE('',#206803,#206811,#206813,.T.); +#206811 = VERTEX_POINT('',#206812); +#206812 = CARTESIAN_POINT('',(153.319597,-77.092142,1.585)); +#206813 = LINE('',#206814,#206815); +#206814 = CARTESIAN_POINT('',(152.664359,-77.092142,1.585)); +#206815 = VECTOR('',#206816,1.); +#206816 = DIRECTION('',(1.,0.,0.)); +#206817 = ORIENTED_EDGE('',*,*,#206818,.T.); +#206818 = EDGE_CURVE('',#206811,#206819,#206821,.T.); +#206819 = VERTEX_POINT('',#206820); +#206820 = CARTESIAN_POINT('',(153.319597,-77.222142,1.585)); +#206821 = CIRCLE('',#206822,6.500000000092E-02); +#206822 = AXIS2_PLACEMENT_3D('',#206823,#206824,#206825); +#206823 = CARTESIAN_POINT('',(153.31959665513,-77.157142,1.585)); +#206824 = DIRECTION('',(0.,0.,-1.)); +#206825 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#206826 = ORIENTED_EDGE('',*,*,#206827,.T.); +#206827 = EDGE_CURVE('',#206819,#206828,#206830,.T.); +#206828 = VERTEX_POINT('',#206829); +#206829 = CARTESIAN_POINT('',(152.419597,-77.222142,1.585)); +#206830 = LINE('',#206831,#206832); +#206831 = CARTESIAN_POINT('',(153.319597,-77.222142,1.585)); +#206832 = VECTOR('',#206833,1.); +#206833 = DIRECTION('',(-1.,0.,0.)); +#206834 = ORIENTED_EDGE('',*,*,#206835,.T.); +#206835 = EDGE_CURVE('',#206828,#206836,#206838,.T.); +#206836 = VERTEX_POINT('',#206837); +#206837 = CARTESIAN_POINT('',(152.387348,-77.100706,1.585)); +#206838 = CIRCLE('',#206839,6.50002119414E-02); +#206839 = AXIS2_PLACEMENT_3D('',#206840,#206841,#206842); +#206840 = CARTESIAN_POINT('',(152.41959748648,-77.15714178806,1.585)); +#206841 = DIRECTION('',(0.,0.,-1.)); +#206842 = DIRECTION('',(-7.484331678207E-06,-0.999999999972,-0.)); +#206843 = ORIENTED_EDGE('',*,*,#206844,.T.); +#206844 = EDGE_CURVE('',#206836,#206845,#206847,.T.); +#206845 = VERTEX_POINT('',#206846); +#206846 = CARTESIAN_POINT('',(153.074835,-76.707856,1.585)); +#206847 = LINE('',#206848,#206849); +#206848 = CARTESIAN_POINT('',(152.387348,-77.100706,1.585)); +#206849 = VECTOR('',#206850,1.); +#206850 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#206851 = ORIENTED_EDGE('',*,*,#206852,.T.); +#206852 = EDGE_CURVE('',#206845,#206775,#206853,.T.); +#206853 = LINE('',#206854,#206855); +#206854 = CARTESIAN_POINT('',(153.074835,-76.707856,1.585)); +#206855 = VECTOR('',#206856,1.); +#206856 = DIRECTION('',(-1.,0.,0.)); +#206857 = PLANE('',#206858); +#206858 = AXIS2_PLACEMENT_3D('',#206859,#206860,#206861); +#206859 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206860 = DIRECTION('',(0.,0.,1.)); +#206861 = DIRECTION('',(1.,0.,-0.)); +#206862 = SHELL_BASED_SURFACE_MODEL('',(#206863)); +#206863 = OPEN_SHELL('',(#206864)); +#206864 = ADVANCED_FACE('',(#206865),#206992,.T.); +#206865 = FACE_BOUND('',#206866,.F.); +#206866 = EDGE_LOOP('',(#206867,#206878,#206886,#206894,#206902,#206911, + #206919,#206927,#206935,#206944,#206952,#206961,#206969,#206978, + #206986)); +#206867 = ORIENTED_EDGE('',*,*,#206868,.T.); +#206868 = EDGE_CURVE('',#206869,#206871,#206873,.T.); +#206869 = VERTEX_POINT('',#206870); +#206870 = CARTESIAN_POINT('',(116.899545,-76.689411,1.585)); +#206871 = VERTEX_POINT('',#206872); +#206872 = CARTESIAN_POINT('',(117.024597,-76.714285,1.585)); +#206873 = CIRCLE('',#206874,6.499988811648E-02); +#206874 = AXIS2_PLACEMENT_3D('',#206875,#206876,#206877); +#206875 = CARTESIAN_POINT('',(116.95959711188,-76.7142852701,1.585)); +#206876 = DIRECTION('',(0.,0.,-1.)); +#206877 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#206878 = ORIENTED_EDGE('',*,*,#206879,.T.); +#206879 = EDGE_CURVE('',#206871,#206880,#206882,.T.); +#206880 = VERTEX_POINT('',#206881); +#206881 = CARTESIAN_POINT('',(117.024597,-77.077857,1.585)); +#206882 = LINE('',#206883,#206884); +#206883 = CARTESIAN_POINT('',(117.024597,-76.714285,1.585)); +#206884 = VECTOR('',#206885,1.); +#206885 = DIRECTION('',(0.,-1.,0.)); +#206886 = ORIENTED_EDGE('',*,*,#206887,.T.); +#206887 = EDGE_CURVE('',#206880,#206888,#206890,.T.); +#206888 = VERTEX_POINT('',#206889); +#206889 = CARTESIAN_POINT('',(117.323168,-77.077857,1.585)); +#206890 = LINE('',#206891,#206892); +#206891 = CARTESIAN_POINT('',(117.024597,-77.077857,1.585)); +#206892 = VECTOR('',#206893,1.); +#206893 = DIRECTION('',(1.,0.,0.)); +#206894 = ORIENTED_EDGE('',*,*,#206895,.T.); +#206895 = EDGE_CURVE('',#206888,#206896,#206898,.T.); +#206896 = VERTEX_POINT('',#206897); +#206897 = CARTESIAN_POINT('',(117.323168,-76.842857,1.585)); +#206898 = LINE('',#206899,#206900); +#206899 = CARTESIAN_POINT('',(117.323168,-77.077857,1.585)); +#206900 = VECTOR('',#206901,1.); +#206901 = DIRECTION('',(0.,1.,0.)); +#206902 = ORIENTED_EDGE('',*,*,#206903,.T.); +#206903 = EDGE_CURVE('',#206896,#206904,#206906,.T.); +#206904 = VERTEX_POINT('',#206905); +#206905 = CARTESIAN_POINT('',(117.453168,-76.842857,1.585)); +#206906 = CIRCLE('',#206907,6.500000000092E-02); +#206907 = AXIS2_PLACEMENT_3D('',#206908,#206909,#206910); +#206908 = CARTESIAN_POINT('',(117.388168,-76.84285734486,1.585)); +#206909 = DIRECTION('',(0.,0.,-1.)); +#206910 = DIRECTION('',(-0.999999999986,5.305658025668E-06,0.)); +#206911 = ORIENTED_EDGE('',*,*,#206912,.T.); +#206912 = EDGE_CURVE('',#206904,#206913,#206915,.T.); +#206913 = VERTEX_POINT('',#206914); +#206914 = CARTESIAN_POINT('',(117.453168,-77.077857,1.585)); +#206915 = LINE('',#206916,#206917); +#206916 = CARTESIAN_POINT('',(117.453168,-76.842857,1.585)); +#206917 = VECTOR('',#206918,1.); +#206918 = DIRECTION('',(0.,-1.,0.)); +#206919 = ORIENTED_EDGE('',*,*,#206920,.T.); +#206920 = EDGE_CURVE('',#206913,#206921,#206923,.T.); +#206921 = VERTEX_POINT('',#206922); +#206922 = CARTESIAN_POINT('',(117.794597,-77.077857,1.585)); +#206923 = LINE('',#206924,#206925); +#206924 = CARTESIAN_POINT('',(117.453168,-77.077857,1.585)); +#206925 = VECTOR('',#206926,1.); +#206926 = DIRECTION('',(1.,0.,0.)); +#206927 = ORIENTED_EDGE('',*,*,#206928,.T.); +#206928 = EDGE_CURVE('',#206921,#206929,#206931,.T.); +#206929 = VERTEX_POINT('',#206930); +#206930 = CARTESIAN_POINT('',(117.794597,-76.714285,1.585)); +#206931 = LINE('',#206932,#206933); +#206932 = CARTESIAN_POINT('',(117.794597,-77.077857,1.585)); +#206933 = VECTOR('',#206934,1.); +#206934 = DIRECTION('',(0.,1.,0.)); +#206935 = ORIENTED_EDGE('',*,*,#206936,.T.); +#206936 = EDGE_CURVE('',#206929,#206937,#206939,.T.); +#206937 = VERTEX_POINT('',#206938); +#206938 = CARTESIAN_POINT('',(117.924597,-76.714285,1.585)); +#206939 = CIRCLE('',#206940,6.500000000092E-02); +#206940 = AXIS2_PLACEMENT_3D('',#206941,#206942,#206943); +#206941 = CARTESIAN_POINT('',(117.859597,-76.71428534486,1.585)); +#206942 = DIRECTION('',(0.,0.,-1.)); +#206943 = DIRECTION('',(-0.999999999986,5.305658025668E-06,0.)); +#206944 = ORIENTED_EDGE('',*,*,#206945,.T.); +#206945 = EDGE_CURVE('',#206937,#206946,#206948,.T.); +#206946 = VERTEX_POINT('',#206947); +#206947 = CARTESIAN_POINT('',(117.924597,-77.142857,1.585)); +#206948 = LINE('',#206949,#206950); +#206949 = CARTESIAN_POINT('',(117.924597,-76.714285,1.585)); +#206950 = VECTOR('',#206951,1.); +#206951 = DIRECTION('',(0.,-1.,0.)); +#206952 = ORIENTED_EDGE('',*,*,#206953,.T.); +#206953 = EDGE_CURVE('',#206946,#206954,#206956,.T.); +#206954 = VERTEX_POINT('',#206955); +#206955 = CARTESIAN_POINT('',(117.859597,-77.207857,1.585)); +#206956 = CIRCLE('',#206957,6.500103935389E-02); +#206957 = AXIS2_PLACEMENT_3D('',#206958,#206959,#206960); +#206958 = CARTESIAN_POINT('',(117.85959596065,-77.14285596065,1.585)); +#206959 = DIRECTION('',(0.,0.,-1.)); +#206960 = DIRECTION('',(0.999999999872,-1.59896764922E-05,0.)); +#206961 = ORIENTED_EDGE('',*,*,#206962,.T.); +#206962 = EDGE_CURVE('',#206954,#206963,#206965,.T.); +#206963 = VERTEX_POINT('',#206964); +#206964 = CARTESIAN_POINT('',(116.959597,-77.207857,1.585)); +#206965 = LINE('',#206966,#206967); +#206966 = CARTESIAN_POINT('',(117.859597,-77.207857,1.585)); +#206967 = VECTOR('',#206968,1.); +#206968 = DIRECTION('',(-1.,0.,0.)); +#206969 = ORIENTED_EDGE('',*,*,#206970,.T.); +#206970 = EDGE_CURVE('',#206963,#206971,#206973,.T.); +#206971 = VERTEX_POINT('',#206972); +#206972 = CARTESIAN_POINT('',(116.894597,-77.142857,1.585)); +#206973 = CIRCLE('',#206974,6.500103935388E-02); +#206974 = AXIS2_PLACEMENT_3D('',#206975,#206976,#206977); +#206975 = CARTESIAN_POINT('',(116.95959803934,-77.14285596065,1.585)); +#206976 = DIRECTION('',(0.,0.,-1.)); +#206977 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#206978 = ORIENTED_EDGE('',*,*,#206979,.T.); +#206979 = EDGE_CURVE('',#206971,#206980,#206982,.T.); +#206980 = VERTEX_POINT('',#206981); +#206981 = CARTESIAN_POINT('',(116.894597,-76.714285,1.585)); +#206982 = LINE('',#206983,#206984); +#206983 = CARTESIAN_POINT('',(116.894597,-77.142857,1.585)); +#206984 = VECTOR('',#206985,1.); +#206985 = DIRECTION('',(0.,1.,0.)); +#206986 = ORIENTED_EDGE('',*,*,#206987,.T.); +#206987 = EDGE_CURVE('',#206980,#206869,#206988,.T.); +#206988 = LINE('',#206989,#206990); +#206989 = CARTESIAN_POINT('',(116.894597,-76.714285,1.585)); +#206990 = VECTOR('',#206991,1.); +#206991 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#206992 = PLANE('',#206993); +#206993 = AXIS2_PLACEMENT_3D('',#206994,#206995,#206996); +#206994 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206995 = DIRECTION('',(0.,0.,1.)); +#206996 = DIRECTION('',(1.,0.,-0.)); +#206997 = SHELL_BASED_SURFACE_MODEL('',(#206998)); +#206998 = OPEN_SHELL('',(#206999)); +#206999 = ADVANCED_FACE('',(#207000),#207170,.T.); +#207000 = FACE_BOUND('',#207001,.F.); +#207001 = EDGE_LOOP('',(#207002,#207013,#207021,#207030,#207038,#207047, + #207055,#207063,#207071,#207080,#207088,#207097,#207105,#207114, + #207122,#207131,#207139,#207147,#207155,#207164)); +#207002 = ORIENTED_EDGE('',*,*,#207003,.T.); +#207003 = EDGE_CURVE('',#207004,#207006,#207008,.T.); +#207004 = VERTEX_POINT('',#207005); +#207005 = CARTESIAN_POINT('',(139.759349,-76.51118,1.585)); +#207006 = VERTEX_POINT('',#207007); +#207007 = CARTESIAN_POINT('',(139.851273,-76.603104,1.585)); +#207008 = CIRCLE('',#207009,6.50000837538E-02); +#207009 = AXIS2_PLACEMENT_3D('',#207010,#207011,#207012); +#207010 = CARTESIAN_POINT('',(139.80531098493,-76.55714201506,1.585)); +#207011 = DIRECTION('',(0.,0.,-1.)); +#207012 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#207013 = ORIENTED_EDGE('',*,*,#207014,.T.); +#207014 = EDGE_CURVE('',#207006,#207015,#207017,.T.); +#207015 = VERTEX_POINT('',#207016); +#207016 = CARTESIAN_POINT('',(139.819266,-76.63511,1.585)); +#207017 = LINE('',#207018,#207019); +#207018 = CARTESIAN_POINT('',(139.851273,-76.603104,1.585)); +#207019 = VECTOR('',#207020,1.); +#207020 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#207021 = ORIENTED_EDGE('',*,*,#207022,.T.); +#207022 = EDGE_CURVE('',#207015,#207023,#207025,.T.); +#207023 = VERTEX_POINT('',#207024); +#207024 = CARTESIAN_POINT('',(139.819265,-76.907743,1.585)); +#207025 = CIRCLE('',#207026,0.272201331757); +#207026 = AXIS2_PLACEMENT_3D('',#207027,#207028,#207029); +#207027 = CARTESIAN_POINT('',(140.05487402454,-76.77142736419,1.585)); +#207028 = DIRECTION('',(0.,0.,1.)); +#207029 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#207030 = ORIENTED_EDGE('',*,*,#207031,.T.); +#207031 = EDGE_CURVE('',#207023,#207032,#207034,.T.); +#207032 = VERTEX_POINT('',#207033); +#207033 = CARTESIAN_POINT('',(139.886669,-76.975149,1.585)); +#207034 = LINE('',#207035,#207036); +#207035 = CARTESIAN_POINT('',(139.819265,-76.907743,1.585)); +#207036 = VECTOR('',#207037,1.); +#207037 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#207038 = ORIENTED_EDGE('',*,*,#207039,.T.); +#207039 = EDGE_CURVE('',#207032,#207040,#207042,.T.); +#207040 = VERTEX_POINT('',#207041); +#207041 = CARTESIAN_POINT('',(140.225881,-77.049285,1.585)); +#207042 = CIRCLE('',#207043,0.553317785495); +#207043 = AXIS2_PLACEMENT_3D('',#207044,#207045,#207046); +#207044 = CARTESIAN_POINT('',(140.1684500839,-76.49895576979,1.585)); +#207045 = DIRECTION('',(0.,0.,1.)); +#207046 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#207047 = ORIENTED_EDGE('',*,*,#207048,.T.); +#207048 = EDGE_CURVE('',#207040,#207049,#207051,.T.); +#207049 = VERTEX_POINT('',#207050); +#207050 = CARTESIAN_POINT('',(140.382622,-77.010099,1.585)); +#207051 = LINE('',#207052,#207053); +#207052 = CARTESIAN_POINT('',(140.225881,-77.049285,1.585)); +#207053 = VECTOR('',#207054,1.); +#207054 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#207055 = ORIENTED_EDGE('',*,*,#207056,.T.); +#207056 = EDGE_CURVE('',#207049,#207057,#207059,.T.); +#207057 = VERTEX_POINT('',#207058); +#207058 = CARTESIAN_POINT('',(140.452522,-76.97515,1.585)); +#207059 = LINE('',#207060,#207061); +#207060 = CARTESIAN_POINT('',(140.382622,-77.010099,1.585)); +#207061 = VECTOR('',#207062,1.); +#207062 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#207063 = ORIENTED_EDGE('',*,*,#207064,.T.); +#207064 = EDGE_CURVE('',#207057,#207065,#207067,.T.); +#207065 = VERTEX_POINT('',#207066); +#207066 = CARTESIAN_POINT('',(140.519928,-76.907743,1.585)); +#207067 = LINE('',#207068,#207069); +#207068 = CARTESIAN_POINT('',(140.452522,-76.97515,1.585)); +#207069 = VECTOR('',#207070,1.); +#207070 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#207071 = ORIENTED_EDGE('',*,*,#207072,.T.); +#207072 = EDGE_CURVE('',#207065,#207073,#207075,.T.); +#207073 = VERTEX_POINT('',#207074); +#207074 = CARTESIAN_POINT('',(140.519928,-76.635111,1.585)); +#207075 = CIRCLE('',#207076,0.272194686174); +#207076 = AXIS2_PLACEMENT_3D('',#207077,#207078,#207079); +#207077 = CARTESIAN_POINT('',(140.28432686391,-76.771427,1.585)); +#207078 = DIRECTION('',(0.,-0.,1.)); +#207079 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#207080 = ORIENTED_EDGE('',*,*,#207081,.T.); +#207081 = EDGE_CURVE('',#207073,#207082,#207084,.T.); +#207082 = VERTEX_POINT('',#207083); +#207083 = CARTESIAN_POINT('',(140.487921,-76.603104,1.585)); +#207084 = LINE('',#207085,#207086); +#207085 = CARTESIAN_POINT('',(140.519928,-76.635111,1.585)); +#207086 = VECTOR('',#207087,1.); +#207087 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207088 = ORIENTED_EDGE('',*,*,#207089,.T.); +#207089 = EDGE_CURVE('',#207082,#207090,#207092,.T.); +#207090 = VERTEX_POINT('',#207091); +#207091 = CARTESIAN_POINT('',(140.579843,-76.51118,1.585)); +#207092 = CIRCLE('',#207093,6.49993766517E-02); +#207093 = AXIS2_PLACEMENT_3D('',#207094,#207095,#207096); +#207094 = CARTESIAN_POINT('',(140.53388176676,-76.55714176677,1.585)); +#207095 = DIRECTION('',(0.,0.,-1.)); +#207096 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#207097 = ORIENTED_EDGE('',*,*,#207098,.T.); +#207098 = EDGE_CURVE('',#207090,#207099,#207101,.T.); +#207099 = VERTEX_POINT('',#207100); +#207100 = CARTESIAN_POINT('',(140.631003,-76.566461,1.585)); +#207101 = LINE('',#207102,#207103); +#207102 = CARTESIAN_POINT('',(140.579843,-76.51118,1.585)); +#207103 = VECTOR('',#207104,1.); +#207104 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#207105 = ORIENTED_EDGE('',*,*,#207106,.T.); +#207106 = EDGE_CURVE('',#207099,#207107,#207109,.T.); +#207107 = VERTEX_POINT('',#207108); +#207108 = CARTESIAN_POINT('',(140.630999,-76.976399,1.585)); +#207109 = CIRCLE('',#207110,0.409312568567); +#207110 = AXIS2_PLACEMENT_3D('',#207111,#207112,#207113); +#207111 = CARTESIAN_POINT('',(140.27670664807,-76.77142654294,1.585)); +#207112 = DIRECTION('',(0.,0.,-1.)); +#207113 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#207114 = ORIENTED_EDGE('',*,*,#207115,.T.); +#207115 = EDGE_CURVE('',#207107,#207116,#207118,.T.); +#207116 = VERTEX_POINT('',#207117); +#207117 = CARTESIAN_POINT('',(140.528322,-77.080322,1.585)); +#207118 = LINE('',#207119,#207120); +#207119 = CARTESIAN_POINT('',(140.630999,-76.976399,1.585)); +#207120 = VECTOR('',#207121,1.); +#207121 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#207122 = ORIENTED_EDGE('',*,*,#207123,.T.); +#207123 = EDGE_CURVE('',#207116,#207124,#207126,.T.); +#207124 = VERTEX_POINT('',#207125); +#207125 = CARTESIAN_POINT('',(140.089546,-77.177344,1.585)); +#207126 = CIRCLE('',#207127,0.675422176574); +#207127 = AXIS2_PLACEMENT_3D('',#207128,#207129,#207130); +#207128 = CARTESIAN_POINT('',(140.17141275007,-76.50690164465,1.585)); +#207129 = DIRECTION('',(0.,0.,-1.)); +#207130 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#207131 = ORIENTED_EDGE('',*,*,#207132,.T.); +#207132 = EDGE_CURVE('',#207124,#207133,#207135,.T.); +#207133 = VERTEX_POINT('',#207134); +#207134 = CARTESIAN_POINT('',(139.904813,-77.129566,1.585)); +#207135 = LINE('',#207136,#207137); +#207136 = CARTESIAN_POINT('',(140.089546,-77.177344,1.585)); +#207137 = VECTOR('',#207138,1.); +#207138 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#207139 = ORIENTED_EDGE('',*,*,#207140,.T.); +#207140 = EDGE_CURVE('',#207133,#207141,#207143,.T.); +#207141 = VERTEX_POINT('',#207142); +#207142 = CARTESIAN_POINT('',(139.802206,-77.074533,1.585)); +#207143 = LINE('',#207144,#207145); +#207144 = CARTESIAN_POINT('',(139.904813,-77.129566,1.585)); +#207145 = VECTOR('',#207146,1.); +#207146 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#207147 = ORIENTED_EDGE('',*,*,#207148,.T.); +#207148 = EDGE_CURVE('',#207141,#207149,#207151,.T.); +#207149 = VERTEX_POINT('',#207150); +#207150 = CARTESIAN_POINT('',(139.708191,-76.976395,1.585)); +#207151 = LINE('',#207152,#207153); +#207152 = CARTESIAN_POINT('',(139.802206,-77.074533,1.585)); +#207153 = VECTOR('',#207154,1.); +#207154 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#207155 = ORIENTED_EDGE('',*,*,#207156,.T.); +#207156 = EDGE_CURVE('',#207149,#207157,#207159,.T.); +#207157 = VERTEX_POINT('',#207158); +#207158 = CARTESIAN_POINT('',(139.708194,-76.566455,1.585)); +#207159 = CIRCLE('',#207160,0.409312909751); +#207160 = AXIS2_PLACEMENT_3D('',#207161,#207162,#207163); +#207161 = CARTESIAN_POINT('',(140.06248666757,-76.77142759277,1.585)); +#207162 = DIRECTION('',(0.,0.,-1.)); +#207163 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#207164 = ORIENTED_EDGE('',*,*,#207165,.T.); +#207165 = EDGE_CURVE('',#207157,#207004,#207166,.T.); +#207166 = LINE('',#207167,#207168); +#207167 = CARTESIAN_POINT('',(139.708194,-76.566455,1.585)); +#207168 = VECTOR('',#207169,1.); +#207169 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#207170 = PLANE('',#207171); +#207171 = AXIS2_PLACEMENT_3D('',#207172,#207173,#207174); +#207172 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207173 = DIRECTION('',(0.,0.,1.)); +#207174 = DIRECTION('',(1.,0.,-0.)); +#207175 = SHELL_BASED_SURFACE_MODEL('',(#207176)); +#207176 = OPEN_SHELL('',(#207177)); +#207177 = ADVANCED_FACE('',(#207178),#207247,.T.); +#207178 = FACE_BOUND('',#207179,.F.); +#207179 = EDGE_LOOP('',(#207180,#207191,#207199,#207208,#207216,#207225, + #207233,#207241)); +#207180 = ORIENTED_EDGE('',*,*,#207181,.T.); +#207181 = EDGE_CURVE('',#207182,#207184,#207186,.T.); +#207182 = VERTEX_POINT('',#207183); +#207183 = CARTESIAN_POINT('',(135.449545,-76.653696,1.585)); +#207184 = VERTEX_POINT('',#207185); +#207185 = CARTESIAN_POINT('',(135.574597,-76.67857,1.585)); +#207186 = CIRCLE('',#207187,6.499988811648E-02); +#207187 = AXIS2_PLACEMENT_3D('',#207188,#207189,#207190); +#207188 = CARTESIAN_POINT('',(135.50959711188,-76.6785702701,1.585)); +#207189 = DIRECTION('',(0.,0.,-1.)); +#207190 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207191 = ORIENTED_EDGE('',*,*,#207192,.T.); +#207192 = EDGE_CURVE('',#207184,#207193,#207195,.T.); +#207193 = VERTEX_POINT('',#207194); +#207194 = CARTESIAN_POINT('',(135.574597,-77.107142,1.585)); +#207195 = LINE('',#207196,#207197); +#207196 = CARTESIAN_POINT('',(135.574597,-76.67857,1.585)); +#207197 = VECTOR('',#207198,1.); +#207198 = DIRECTION('',(0.,-1.,0.)); +#207199 = ORIENTED_EDGE('',*,*,#207200,.T.); +#207200 = EDGE_CURVE('',#207193,#207201,#207203,.T.); +#207201 = VERTEX_POINT('',#207202); +#207202 = CARTESIAN_POINT('',(135.509597,-77.172142,1.585)); +#207203 = CIRCLE('',#207204,6.500103935393E-02); +#207204 = AXIS2_PLACEMENT_3D('',#207205,#207206,#207207); +#207205 = CARTESIAN_POINT('',(135.50959596065,-77.10714096065,1.585)); +#207206 = DIRECTION('',(0.,0.,-1.)); +#207207 = DIRECTION('',(0.999999999872,-1.598967714806E-05,0.)); +#207208 = ORIENTED_EDGE('',*,*,#207209,.T.); +#207209 = EDGE_CURVE('',#207201,#207210,#207212,.T.); +#207210 = VERTEX_POINT('',#207211); +#207211 = CARTESIAN_POINT('',(134.609597,-77.172142,1.585)); +#207212 = LINE('',#207213,#207214); +#207213 = CARTESIAN_POINT('',(135.509597,-77.172142,1.585)); +#207214 = VECTOR('',#207215,1.); +#207215 = DIRECTION('',(-1.,0.,0.)); +#207216 = ORIENTED_EDGE('',*,*,#207217,.T.); +#207217 = EDGE_CURVE('',#207210,#207218,#207220,.T.); +#207218 = VERTEX_POINT('',#207219); +#207219 = CARTESIAN_POINT('',(134.609597,-77.042142,1.585)); +#207220 = CIRCLE('',#207221,6.500000000091E-02); +#207221 = AXIS2_PLACEMENT_3D('',#207222,#207223,#207224); +#207222 = CARTESIAN_POINT('',(134.60959734486,-77.107142,1.585)); +#207223 = DIRECTION('',(0.,0.,-1.)); +#207224 = DIRECTION('',(-5.30565758841E-06,-0.999999999986,-0.)); +#207225 = ORIENTED_EDGE('',*,*,#207226,.T.); +#207226 = EDGE_CURVE('',#207218,#207227,#207229,.T.); +#207227 = VERTEX_POINT('',#207228); +#207228 = CARTESIAN_POINT('',(135.444597,-77.042142,1.585)); +#207229 = LINE('',#207230,#207231); +#207230 = CARTESIAN_POINT('',(134.609597,-77.042142,1.585)); +#207231 = VECTOR('',#207232,1.); +#207232 = DIRECTION('',(1.,0.,0.)); +#207233 = ORIENTED_EDGE('',*,*,#207234,.T.); +#207234 = EDGE_CURVE('',#207227,#207235,#207237,.T.); +#207235 = VERTEX_POINT('',#207236); +#207236 = CARTESIAN_POINT('',(135.444597,-76.67857,1.585)); +#207237 = LINE('',#207238,#207239); +#207238 = CARTESIAN_POINT('',(135.444597,-77.042142,1.585)); +#207239 = VECTOR('',#207240,1.); +#207240 = DIRECTION('',(0.,1.,0.)); +#207241 = ORIENTED_EDGE('',*,*,#207242,.T.); +#207242 = EDGE_CURVE('',#207235,#207182,#207243,.T.); +#207243 = LINE('',#207244,#207245); +#207244 = CARTESIAN_POINT('',(135.444597,-76.67857,1.585)); +#207245 = VECTOR('',#207246,1.); +#207246 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207247 = PLANE('',#207248); +#207248 = AXIS2_PLACEMENT_3D('',#207249,#207250,#207251); +#207249 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207250 = DIRECTION('',(0.,0.,1.)); +#207251 = DIRECTION('',(1.,0.,-0.)); +#207252 = SHELL_BASED_SURFACE_MODEL('',(#207253)); +#207253 = OPEN_SHELL('',(#207254)); +#207254 = ADVANCED_FACE('',(#207255,#207356),#207431,.T.); +#207255 = FACE_BOUND('',#207256,.F.); +#207256 = EDGE_LOOP('',(#207257,#207268,#207276,#207284,#207292,#207300, + #207308,#207317,#207325,#207334,#207342,#207350)); +#207257 = ORIENTED_EDGE('',*,*,#207258,.T.); +#207258 = EDGE_CURVE('',#207259,#207261,#207263,.T.); +#207259 = VERTEX_POINT('',#207260); +#207260 = CARTESIAN_POINT('',(142.35087,-76.612533,1.585)); +#207261 = VERTEX_POINT('',#207262); +#207262 = CARTESIAN_POINT('',(142.781693,-76.515124,1.585)); +#207263 = CIRCLE('',#207264,0.670538401945); +#207264 = AXIS2_PLACEMENT_3D('',#207265,#207266,#207267); +#207265 = CARTESIAN_POINT('',(142.70590657351,-77.18136582249,1.585)); +#207266 = DIRECTION('',(0.,0.,-1.)); +#207267 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#207268 = ORIENTED_EDGE('',*,*,#207269,.T.); +#207269 = EDGE_CURVE('',#207261,#207270,#207272,.T.); +#207270 = VERTEX_POINT('',#207271); +#207271 = CARTESIAN_POINT('',(142.97438,-76.56329,1.585)); +#207272 = LINE('',#207273,#207274); +#207273 = CARTESIAN_POINT('',(142.781693,-76.515124,1.585)); +#207274 = VECTOR('',#207275,1.); +#207275 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#207276 = ORIENTED_EDGE('',*,*,#207277,.T.); +#207277 = EDGE_CURVE('',#207270,#207278,#207280,.T.); +#207278 = VERTEX_POINT('',#207279); +#207279 = CARTESIAN_POINT('',(143.076987,-76.618323,1.585)); +#207280 = LINE('',#207281,#207282); +#207281 = CARTESIAN_POINT('',(142.97438,-76.56329,1.585)); +#207282 = VECTOR('',#207283,1.); +#207283 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#207284 = ORIENTED_EDGE('',*,*,#207285,.T.); +#207285 = EDGE_CURVE('',#207278,#207286,#207288,.T.); +#207286 = VERTEX_POINT('',#207287); +#207287 = CARTESIAN_POINT('',(143.170999,-76.716456,1.585)); +#207288 = LINE('',#207289,#207290); +#207289 = CARTESIAN_POINT('',(143.076987,-76.618323,1.585)); +#207290 = VECTOR('',#207291,1.); +#207291 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#207292 = ORIENTED_EDGE('',*,*,#207293,.T.); +#207293 = EDGE_CURVE('',#207286,#207294,#207296,.T.); +#207294 = VERTEX_POINT('',#207295); +#207295 = CARTESIAN_POINT('',(143.222563,-76.868348,1.585)); +#207296 = LINE('',#207297,#207298); +#207297 = CARTESIAN_POINT('',(143.170999,-76.716456,1.585)); +#207298 = VECTOR('',#207299,1.); +#207299 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#207300 = ORIENTED_EDGE('',*,*,#207301,.T.); +#207301 = EDGE_CURVE('',#207294,#207302,#207304,.T.); +#207302 = VERTEX_POINT('',#207303); +#207303 = CARTESIAN_POINT('',(143.224597,-77.092857,1.585)); +#207304 = LINE('',#207305,#207306); +#207305 = CARTESIAN_POINT('',(143.222563,-76.868348,1.585)); +#207306 = VECTOR('',#207307,1.); +#207307 = DIRECTION('',(9.059398644723E-03,-0.999958962806,0.)); +#207308 = ORIENTED_EDGE('',*,*,#207309,.T.); +#207309 = EDGE_CURVE('',#207302,#207310,#207312,.T.); +#207310 = VERTEX_POINT('',#207311); +#207311 = CARTESIAN_POINT('',(143.159597,-77.157857,1.585)); +#207312 = CIRCLE('',#207313,6.500103935387E-02); +#207313 = AXIS2_PLACEMENT_3D('',#207314,#207315,#207316); +#207314 = CARTESIAN_POINT('',(143.15959596065,-77.09285596065,1.585)); +#207315 = DIRECTION('',(0.,0.,-1.)); +#207316 = DIRECTION('',(0.999999999872,-1.59896756177E-05,0.)); +#207317 = ORIENTED_EDGE('',*,*,#207318,.T.); +#207318 = EDGE_CURVE('',#207310,#207319,#207321,.T.); +#207319 = VERTEX_POINT('',#207320); +#207320 = CARTESIAN_POINT('',(142.259597,-77.157857,1.585)); +#207321 = LINE('',#207322,#207323); +#207322 = CARTESIAN_POINT('',(143.159597,-77.157857,1.585)); +#207323 = VECTOR('',#207324,1.); +#207324 = DIRECTION('',(-1.,0.,0.)); +#207325 = ORIENTED_EDGE('',*,*,#207326,.T.); +#207326 = EDGE_CURVE('',#207319,#207327,#207329,.T.); +#207327 = VERTEX_POINT('',#207328); +#207328 = CARTESIAN_POINT('',(142.194597,-77.092857,1.585)); +#207329 = CIRCLE('',#207330,6.500103935396E-02); +#207330 = AXIS2_PLACEMENT_3D('',#207331,#207332,#207333); +#207331 = CARTESIAN_POINT('',(142.25959803934,-77.09285596065,1.585)); +#207332 = DIRECTION('',(0.,0.,-1.)); +#207333 = DIRECTION('',(-1.598967692943E-05,-0.999999999872,-0.)); +#207334 = ORIENTED_EDGE('',*,*,#207335,.T.); +#207335 = EDGE_CURVE('',#207327,#207336,#207338,.T.); +#207336 = VERTEX_POINT('',#207337); +#207337 = CARTESIAN_POINT('',(142.19663,-76.868348,1.585)); +#207338 = LINE('',#207339,#207340); +#207339 = CARTESIAN_POINT('',(142.194597,-77.092857,1.585)); +#207340 = VECTOR('',#207341,1.); +#207341 = DIRECTION('',(9.054945028507E-03,0.999959003145,0.)); +#207342 = ORIENTED_EDGE('',*,*,#207343,.T.); +#207343 = EDGE_CURVE('',#207336,#207344,#207346,.T.); +#207344 = VERTEX_POINT('',#207345); +#207345 = CARTESIAN_POINT('',(142.248191,-76.71646,1.585)); +#207346 = LINE('',#207347,#207348); +#207347 = CARTESIAN_POINT('',(142.19663,-76.868348,1.585)); +#207348 = VECTOR('',#207349,1.); +#207349 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#207350 = ORIENTED_EDGE('',*,*,#207351,.T.); +#207351 = EDGE_CURVE('',#207344,#207259,#207352,.T.); +#207352 = LINE('',#207353,#207354); +#207353 = CARTESIAN_POINT('',(142.248191,-76.71646,1.585)); +#207354 = VECTOR('',#207355,1.); +#207355 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#207356 = FACE_BOUND('',#207357,.F.); +#207357 = EDGE_LOOP('',(#207358,#207369,#207377,#207385,#207393,#207401, + #207409,#207417,#207425)); +#207358 = ORIENTED_EDGE('',*,*,#207359,.T.); +#207359 = EDGE_CURVE('',#207360,#207362,#207364,.T.); +#207360 = VERTEX_POINT('',#207361); +#207361 = CARTESIAN_POINT('',(142.922622,-76.682756,1.585)); +#207362 = VERTEX_POINT('',#207363); +#207363 = CARTESIAN_POINT('',(142.426669,-76.717706,1.585)); +#207364 = CIRCLE('',#207365,0.559258743581); +#207365 = AXIS2_PLACEMENT_3D('',#207366,#207367,#207368); +#207366 = CARTESIAN_POINT('',(142.70986183298,-77.19996336035,1.585)); +#207367 = DIRECTION('',(0.,0.,1.)); +#207368 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#207369 = ORIENTED_EDGE('',*,*,#207370,.T.); +#207370 = EDGE_CURVE('',#207362,#207371,#207373,.T.); +#207371 = VERTEX_POINT('',#207372); +#207372 = CARTESIAN_POINT('',(142.359265,-76.785112,1.585)); +#207373 = LINE('',#207374,#207375); +#207374 = CARTESIAN_POINT('',(142.426669,-76.717706,1.585)); +#207375 = VECTOR('',#207376,1.); +#207376 = DIRECTION('',(-0.707096290689,-0.707117271529,0.)); +#207377 = ORIENTED_EDGE('',*,*,#207378,.T.); +#207378 = EDGE_CURVE('',#207371,#207379,#207381,.T.); +#207379 = VERTEX_POINT('',#207380); +#207380 = CARTESIAN_POINT('',(142.324597,-76.889118,1.585)); +#207381 = LINE('',#207382,#207383); +#207382 = CARTESIAN_POINT('',(142.359265,-76.785112,1.585)); +#207383 = VECTOR('',#207384,1.); +#207384 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#207385 = ORIENTED_EDGE('',*,*,#207386,.T.); +#207386 = EDGE_CURVE('',#207379,#207387,#207389,.T.); +#207387 = VERTEX_POINT('',#207388); +#207388 = CARTESIAN_POINT('',(142.324597,-77.027857,1.585)); +#207389 = LINE('',#207390,#207391); +#207390 = CARTESIAN_POINT('',(142.324597,-76.889118,1.585)); +#207391 = VECTOR('',#207392,1.); +#207392 = DIRECTION('',(0.,-1.,0.)); +#207393 = ORIENTED_EDGE('',*,*,#207394,.T.); +#207394 = EDGE_CURVE('',#207387,#207395,#207397,.T.); +#207395 = VERTEX_POINT('',#207396); +#207396 = CARTESIAN_POINT('',(143.094597,-77.027857,1.585)); +#207397 = LINE('',#207398,#207399); +#207398 = CARTESIAN_POINT('',(142.324597,-77.027857,1.585)); +#207399 = VECTOR('',#207400,1.); +#207400 = DIRECTION('',(1.,0.,0.)); +#207401 = ORIENTED_EDGE('',*,*,#207402,.T.); +#207402 = EDGE_CURVE('',#207395,#207403,#207405,.T.); +#207403 = VERTEX_POINT('',#207404); +#207404 = CARTESIAN_POINT('',(143.094597,-76.889118,1.585)); +#207405 = LINE('',#207406,#207407); +#207406 = CARTESIAN_POINT('',(143.094597,-77.027857,1.585)); +#207407 = VECTOR('',#207408,1.); +#207408 = DIRECTION('',(0.,1.,0.)); +#207409 = ORIENTED_EDGE('',*,*,#207410,.T.); +#207410 = EDGE_CURVE('',#207403,#207411,#207413,.T.); +#207411 = VERTEX_POINT('',#207412); +#207412 = CARTESIAN_POINT('',(143.059928,-76.785112,1.585)); +#207413 = LINE('',#207414,#207415); +#207414 = CARTESIAN_POINT('',(143.094597,-76.889118,1.585)); +#207415 = VECTOR('',#207416,1.); +#207416 = DIRECTION('',(-0.316230502441,0.948682385905,0.)); +#207417 = ORIENTED_EDGE('',*,*,#207418,.T.); +#207418 = EDGE_CURVE('',#207411,#207419,#207421,.T.); +#207419 = VERTEX_POINT('',#207420); +#207420 = CARTESIAN_POINT('',(142.992522,-76.717706,1.585)); +#207421 = LINE('',#207422,#207423); +#207422 = CARTESIAN_POINT('',(143.059928,-76.785112,1.585)); +#207423 = VECTOR('',#207424,1.); +#207424 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#207425 = ORIENTED_EDGE('',*,*,#207426,.T.); +#207426 = EDGE_CURVE('',#207419,#207360,#207427,.T.); +#207427 = LINE('',#207428,#207429); +#207428 = CARTESIAN_POINT('',(142.992522,-76.717706,1.585)); +#207429 = VECTOR('',#207430,1.); +#207430 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#207431 = PLANE('',#207432); +#207432 = AXIS2_PLACEMENT_3D('',#207433,#207434,#207435); +#207433 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207434 = DIRECTION('',(0.,0.,1.)); +#207435 = DIRECTION('',(1.,0.,-0.)); +#207436 = SHELL_BASED_SURFACE_MODEL('',(#207437)); +#207437 = OPEN_SHELL('',(#207438)); +#207438 = ADVANCED_FACE('',(#207439),#207516,.T.); +#207439 = FACE_BOUND('',#207440,.F.); +#207440 = EDGE_LOOP('',(#207441,#207452,#207460,#207468,#207477,#207485, + #207493,#207502,#207510)); +#207441 = ORIENTED_EDGE('',*,*,#207442,.T.); +#207442 = EDGE_CURVE('',#207443,#207445,#207447,.T.); +#207443 = VERTEX_POINT('',#207444); +#207444 = CARTESIAN_POINT('',(145.179545,-76.525126,1.585)); +#207445 = VERTEX_POINT('',#207446); +#207446 = CARTESIAN_POINT('',(145.304597,-76.55,1.585)); +#207447 = CIRCLE('',#207448,6.499988811649E-02); +#207448 = AXIS2_PLACEMENT_3D('',#207449,#207450,#207451); +#207449 = CARTESIAN_POINT('',(145.23959711188,-76.5500002701,1.585)); +#207450 = DIRECTION('',(0.,0.,-1.)); +#207451 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#207452 = ORIENTED_EDGE('',*,*,#207453,.T.); +#207453 = EDGE_CURVE('',#207445,#207454,#207456,.T.); +#207454 = VERTEX_POINT('',#207455); +#207455 = CARTESIAN_POINT('',(145.304597,-76.742142,1.585)); +#207456 = LINE('',#207457,#207458); +#207457 = CARTESIAN_POINT('',(145.304597,-76.55,1.585)); +#207458 = VECTOR('',#207459,1.); +#207459 = DIRECTION('',(0.,-1.,0.)); +#207460 = ORIENTED_EDGE('',*,*,#207461,.T.); +#207461 = EDGE_CURVE('',#207454,#207462,#207464,.T.); +#207462 = VERTEX_POINT('',#207463); +#207463 = CARTESIAN_POINT('',(146.139597,-76.742142,1.585)); +#207464 = LINE('',#207465,#207466); +#207465 = CARTESIAN_POINT('',(145.304597,-76.742142,1.585)); +#207466 = VECTOR('',#207467,1.); +#207467 = DIRECTION('',(1.,0.,0.)); +#207468 = ORIENTED_EDGE('',*,*,#207469,.T.); +#207469 = EDGE_CURVE('',#207462,#207470,#207472,.T.); +#207470 = VERTEX_POINT('',#207471); +#207471 = CARTESIAN_POINT('',(146.139597,-76.872142,1.585)); +#207472 = CIRCLE('',#207473,6.500000000091E-02); +#207473 = AXIS2_PLACEMENT_3D('',#207474,#207475,#207476); +#207474 = CARTESIAN_POINT('',(146.13959665513,-76.807142,1.585)); +#207475 = DIRECTION('',(0.,0.,-1.)); +#207476 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#207477 = ORIENTED_EDGE('',*,*,#207478,.T.); +#207478 = EDGE_CURVE('',#207470,#207479,#207481,.T.); +#207479 = VERTEX_POINT('',#207480); +#207480 = CARTESIAN_POINT('',(145.304597,-76.872142,1.585)); +#207481 = LINE('',#207482,#207483); +#207482 = CARTESIAN_POINT('',(146.139597,-76.872142,1.585)); +#207483 = VECTOR('',#207484,1.); +#207484 = DIRECTION('',(-1.,0.,0.)); +#207485 = ORIENTED_EDGE('',*,*,#207486,.T.); +#207486 = EDGE_CURVE('',#207479,#207487,#207489,.T.); +#207487 = VERTEX_POINT('',#207488); +#207488 = CARTESIAN_POINT('',(145.304597,-77.064285,1.585)); +#207489 = LINE('',#207490,#207491); +#207490 = CARTESIAN_POINT('',(145.304597,-76.872142,1.585)); +#207491 = VECTOR('',#207492,1.); +#207492 = DIRECTION('',(0.,-1.,0.)); +#207493 = ORIENTED_EDGE('',*,*,#207494,.T.); +#207494 = EDGE_CURVE('',#207487,#207495,#207497,.T.); +#207495 = VERTEX_POINT('',#207496); +#207496 = CARTESIAN_POINT('',(145.174597,-77.064285,1.585)); +#207497 = CIRCLE('',#207498,6.500000000091E-02); +#207498 = AXIS2_PLACEMENT_3D('',#207499,#207500,#207501); +#207499 = CARTESIAN_POINT('',(145.239597,-77.06428465513,1.585)); +#207500 = DIRECTION('',(-0.,0.,-1.)); +#207501 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#207502 = ORIENTED_EDGE('',*,*,#207503,.T.); +#207503 = EDGE_CURVE('',#207495,#207504,#207506,.T.); +#207504 = VERTEX_POINT('',#207505); +#207505 = CARTESIAN_POINT('',(145.174597,-76.55,1.585)); +#207506 = LINE('',#207507,#207508); +#207507 = CARTESIAN_POINT('',(145.174597,-77.064285,1.585)); +#207508 = VECTOR('',#207509,1.); +#207509 = DIRECTION('',(0.,1.,0.)); +#207510 = ORIENTED_EDGE('',*,*,#207511,.T.); +#207511 = EDGE_CURVE('',#207504,#207443,#207512,.T.); +#207512 = LINE('',#207513,#207514); +#207513 = CARTESIAN_POINT('',(145.174597,-76.55,1.585)); +#207514 = VECTOR('',#207515,1.); +#207515 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#207516 = PLANE('',#207517); +#207517 = AXIS2_PLACEMENT_3D('',#207518,#207519,#207520); +#207518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207519 = DIRECTION('',(0.,0.,1.)); +#207520 = DIRECTION('',(1.,0.,-0.)); +#207521 = SHELL_BASED_SURFACE_MODEL('',(#207522)); +#207522 = OPEN_SHELL('',(#207523)); +#207523 = ADVANCED_FACE('',(#207524),#207593,.T.); +#207524 = FACE_BOUND('',#207525,.F.); +#207525 = EDGE_LOOP('',(#207526,#207537,#207545,#207554,#207562,#207571, + #207579,#207587)); +#207526 = ORIENTED_EDGE('',*,*,#207527,.T.); +#207527 = EDGE_CURVE('',#207528,#207530,#207532,.T.); +#207528 = VERTEX_POINT('',#207529); +#207529 = CARTESIAN_POINT('',(107.539545,-76.575125,1.585)); +#207530 = VERTEX_POINT('',#207531); +#207531 = CARTESIAN_POINT('',(107.664597,-76.599999,1.585)); +#207532 = CIRCLE('',#207533,6.499988811648E-02); +#207533 = AXIS2_PLACEMENT_3D('',#207534,#207535,#207536); +#207534 = CARTESIAN_POINT('',(107.59959711188,-76.5999992701,1.585)); +#207535 = DIRECTION('',(0.,0.,-1.)); +#207536 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207537 = ORIENTED_EDGE('',*,*,#207538,.T.); +#207538 = EDGE_CURVE('',#207530,#207539,#207541,.T.); +#207539 = VERTEX_POINT('',#207540); +#207540 = CARTESIAN_POINT('',(107.664597,-77.028571,1.585)); +#207541 = LINE('',#207542,#207543); +#207542 = CARTESIAN_POINT('',(107.664597,-76.599999,1.585)); +#207543 = VECTOR('',#207544,1.); +#207544 = DIRECTION('',(0.,-1.,0.)); +#207545 = ORIENTED_EDGE('',*,*,#207546,.T.); +#207546 = EDGE_CURVE('',#207539,#207547,#207549,.T.); +#207547 = VERTEX_POINT('',#207548); +#207548 = CARTESIAN_POINT('',(107.599597,-77.093571,1.585)); +#207549 = CIRCLE('',#207550,6.500103935388E-02); +#207550 = AXIS2_PLACEMENT_3D('',#207551,#207552,#207553); +#207551 = CARTESIAN_POINT('',(107.59959596065,-77.02856996065,1.585)); +#207552 = DIRECTION('',(0.,0.,-1.)); +#207553 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#207554 = ORIENTED_EDGE('',*,*,#207555,.T.); +#207555 = EDGE_CURVE('',#207547,#207556,#207558,.T.); +#207556 = VERTEX_POINT('',#207557); +#207557 = CARTESIAN_POINT('',(106.699597,-77.093571,1.585)); +#207558 = LINE('',#207559,#207560); +#207559 = CARTESIAN_POINT('',(107.599597,-77.093571,1.585)); +#207560 = VECTOR('',#207561,1.); +#207561 = DIRECTION('',(-1.,0.,0.)); +#207562 = ORIENTED_EDGE('',*,*,#207563,.T.); +#207563 = EDGE_CURVE('',#207556,#207564,#207566,.T.); +#207564 = VERTEX_POINT('',#207565); +#207565 = CARTESIAN_POINT('',(106.699597,-76.963571,1.585)); +#207566 = CIRCLE('',#207567,6.500000000091E-02); +#207567 = AXIS2_PLACEMENT_3D('',#207568,#207569,#207570); +#207568 = CARTESIAN_POINT('',(106.69959734486,-77.028571,1.585)); +#207569 = DIRECTION('',(0.,0.,-1.)); +#207570 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#207571 = ORIENTED_EDGE('',*,*,#207572,.T.); +#207572 = EDGE_CURVE('',#207564,#207573,#207575,.T.); +#207573 = VERTEX_POINT('',#207574); +#207574 = CARTESIAN_POINT('',(107.534597,-76.963571,1.585)); +#207575 = LINE('',#207576,#207577); +#207576 = CARTESIAN_POINT('',(106.699597,-76.963571,1.585)); +#207577 = VECTOR('',#207578,1.); +#207578 = DIRECTION('',(1.,0.,0.)); +#207579 = ORIENTED_EDGE('',*,*,#207580,.T.); +#207580 = EDGE_CURVE('',#207573,#207581,#207583,.T.); +#207581 = VERTEX_POINT('',#207582); +#207582 = CARTESIAN_POINT('',(107.534597,-76.599999,1.585)); +#207583 = LINE('',#207584,#207585); +#207584 = CARTESIAN_POINT('',(107.534597,-76.963571,1.585)); +#207585 = VECTOR('',#207586,1.); +#207586 = DIRECTION('',(0.,1.,0.)); +#207587 = ORIENTED_EDGE('',*,*,#207588,.T.); +#207588 = EDGE_CURVE('',#207581,#207528,#207589,.T.); +#207589 = LINE('',#207590,#207591); +#207590 = CARTESIAN_POINT('',(107.534597,-76.599999,1.585)); +#207591 = VECTOR('',#207592,1.); +#207592 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207593 = PLANE('',#207594); +#207594 = AXIS2_PLACEMENT_3D('',#207595,#207596,#207597); +#207595 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207596 = DIRECTION('',(0.,0.,1.)); +#207597 = DIRECTION('',(1.,0.,-0.)); +#207598 = SHELL_BASED_SURFACE_MODEL('',(#207599)); +#207599 = OPEN_SHELL('',(#207600)); +#207600 = ADVANCED_FACE('',(#207601),#207670,.T.); +#207601 = FACE_BOUND('',#207602,.F.); +#207602 = EDGE_LOOP('',(#207603,#207614,#207622,#207631,#207639,#207648, + #207656,#207664)); +#207603 = ORIENTED_EDGE('',*,*,#207604,.T.); +#207604 = EDGE_CURVE('',#207605,#207607,#207609,.T.); +#207605 = VERTEX_POINT('',#207606); +#207606 = CARTESIAN_POINT('',(110.079545,-76.575125,1.585)); +#207607 = VERTEX_POINT('',#207608); +#207608 = CARTESIAN_POINT('',(110.204597,-76.599999,1.585)); +#207609 = CIRCLE('',#207610,6.499988811649E-02); +#207610 = AXIS2_PLACEMENT_3D('',#207611,#207612,#207613); +#207611 = CARTESIAN_POINT('',(110.13959711188,-76.5999992701,1.585)); +#207612 = DIRECTION('',(0.,0.,-1.)); +#207613 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#207614 = ORIENTED_EDGE('',*,*,#207615,.T.); +#207615 = EDGE_CURVE('',#207607,#207616,#207618,.T.); +#207616 = VERTEX_POINT('',#207617); +#207617 = CARTESIAN_POINT('',(110.204597,-77.028571,1.585)); +#207618 = LINE('',#207619,#207620); +#207619 = CARTESIAN_POINT('',(110.204597,-76.599999,1.585)); +#207620 = VECTOR('',#207621,1.); +#207621 = DIRECTION('',(0.,-1.,0.)); +#207622 = ORIENTED_EDGE('',*,*,#207623,.T.); +#207623 = EDGE_CURVE('',#207616,#207624,#207626,.T.); +#207624 = VERTEX_POINT('',#207625); +#207625 = CARTESIAN_POINT('',(110.139597,-77.093571,1.585)); +#207626 = CIRCLE('',#207627,6.500103935393E-02); +#207627 = AXIS2_PLACEMENT_3D('',#207628,#207629,#207630); +#207628 = CARTESIAN_POINT('',(110.13959596065,-77.02856996065,1.585)); +#207629 = DIRECTION('',(0.,0.,-1.)); +#207630 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#207631 = ORIENTED_EDGE('',*,*,#207632,.T.); +#207632 = EDGE_CURVE('',#207624,#207633,#207635,.T.); +#207633 = VERTEX_POINT('',#207634); +#207634 = CARTESIAN_POINT('',(109.239597,-77.093571,1.585)); +#207635 = LINE('',#207636,#207637); +#207636 = CARTESIAN_POINT('',(110.139597,-77.093571,1.585)); +#207637 = VECTOR('',#207638,1.); +#207638 = DIRECTION('',(-1.,0.,0.)); +#207639 = ORIENTED_EDGE('',*,*,#207640,.T.); +#207640 = EDGE_CURVE('',#207633,#207641,#207643,.T.); +#207641 = VERTEX_POINT('',#207642); +#207642 = CARTESIAN_POINT('',(109.239597,-76.963571,1.585)); +#207643 = CIRCLE('',#207644,6.500000000091E-02); +#207644 = AXIS2_PLACEMENT_3D('',#207645,#207646,#207647); +#207645 = CARTESIAN_POINT('',(109.23959734486,-77.028571,1.585)); +#207646 = DIRECTION('',(0.,0.,-1.)); +#207647 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#207648 = ORIENTED_EDGE('',*,*,#207649,.T.); +#207649 = EDGE_CURVE('',#207641,#207650,#207652,.T.); +#207650 = VERTEX_POINT('',#207651); +#207651 = CARTESIAN_POINT('',(110.074597,-76.963571,1.585)); +#207652 = LINE('',#207653,#207654); +#207653 = CARTESIAN_POINT('',(109.239597,-76.963571,1.585)); +#207654 = VECTOR('',#207655,1.); +#207655 = DIRECTION('',(1.,0.,0.)); +#207656 = ORIENTED_EDGE('',*,*,#207657,.T.); +#207657 = EDGE_CURVE('',#207650,#207658,#207660,.T.); +#207658 = VERTEX_POINT('',#207659); +#207659 = CARTESIAN_POINT('',(110.074597,-76.599999,1.585)); +#207660 = LINE('',#207661,#207662); +#207661 = CARTESIAN_POINT('',(110.074597,-76.963571,1.585)); +#207662 = VECTOR('',#207663,1.); +#207663 = DIRECTION('',(0.,1.,0.)); +#207664 = ORIENTED_EDGE('',*,*,#207665,.T.); +#207665 = EDGE_CURVE('',#207658,#207605,#207666,.T.); +#207666 = LINE('',#207667,#207668); +#207667 = CARTESIAN_POINT('',(110.074597,-76.599999,1.585)); +#207668 = VECTOR('',#207669,1.); +#207669 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207670 = PLANE('',#207671); +#207671 = AXIS2_PLACEMENT_3D('',#207672,#207673,#207674); +#207672 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207673 = DIRECTION('',(0.,0.,1.)); +#207674 = DIRECTION('',(1.,0.,-0.)); +#207675 = SHELL_BASED_SURFACE_MODEL('',(#207676)); +#207676 = OPEN_SHELL('',(#207677)); +#207677 = ADVANCED_FACE('',(#207678),#207747,.T.); +#207678 = FACE_BOUND('',#207679,.F.); +#207679 = EDGE_LOOP('',(#207680,#207691,#207699,#207708,#207716,#207725, + #207733,#207741)); +#207680 = ORIENTED_EDGE('',*,*,#207681,.T.); +#207681 = EDGE_CURVE('',#207682,#207684,#207686,.T.); +#207682 = VERTEX_POINT('',#207683); +#207683 = CARTESIAN_POINT('',(112.619545,-76.575125,1.585)); +#207684 = VERTEX_POINT('',#207685); +#207685 = CARTESIAN_POINT('',(112.744597,-76.599999,1.585)); +#207686 = CIRCLE('',#207687,6.499988811649E-02); +#207687 = AXIS2_PLACEMENT_3D('',#207688,#207689,#207690); +#207688 = CARTESIAN_POINT('',(112.67959711188,-76.5999992701,1.585)); +#207689 = DIRECTION('',(0.,0.,-1.)); +#207690 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#207691 = ORIENTED_EDGE('',*,*,#207692,.T.); +#207692 = EDGE_CURVE('',#207684,#207693,#207695,.T.); +#207693 = VERTEX_POINT('',#207694); +#207694 = CARTESIAN_POINT('',(112.744597,-77.028571,1.585)); +#207695 = LINE('',#207696,#207697); +#207696 = CARTESIAN_POINT('',(112.744597,-76.599999,1.585)); +#207697 = VECTOR('',#207698,1.); +#207698 = DIRECTION('',(0.,-1.,0.)); +#207699 = ORIENTED_EDGE('',*,*,#207700,.T.); +#207700 = EDGE_CURVE('',#207693,#207701,#207703,.T.); +#207701 = VERTEX_POINT('',#207702); +#207702 = CARTESIAN_POINT('',(112.679597,-77.093571,1.585)); +#207703 = CIRCLE('',#207704,6.500103935389E-02); +#207704 = AXIS2_PLACEMENT_3D('',#207705,#207706,#207707); +#207705 = CARTESIAN_POINT('',(112.67959596065,-77.02856996065,1.585)); +#207706 = DIRECTION('',(0.,0.,-1.)); +#207707 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#207708 = ORIENTED_EDGE('',*,*,#207709,.T.); +#207709 = EDGE_CURVE('',#207701,#207710,#207712,.T.); +#207710 = VERTEX_POINT('',#207711); +#207711 = CARTESIAN_POINT('',(111.779597,-77.093571,1.585)); +#207712 = LINE('',#207713,#207714); +#207713 = CARTESIAN_POINT('',(112.679597,-77.093571,1.585)); +#207714 = VECTOR('',#207715,1.); +#207715 = DIRECTION('',(-1.,0.,0.)); +#207716 = ORIENTED_EDGE('',*,*,#207717,.T.); +#207717 = EDGE_CURVE('',#207710,#207718,#207720,.T.); +#207718 = VERTEX_POINT('',#207719); +#207719 = CARTESIAN_POINT('',(111.779597,-76.963571,1.585)); +#207720 = CIRCLE('',#207721,6.500000000091E-02); +#207721 = AXIS2_PLACEMENT_3D('',#207722,#207723,#207724); +#207722 = CARTESIAN_POINT('',(111.77959734486,-77.028571,1.585)); +#207723 = DIRECTION('',(0.,0.,-1.)); +#207724 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#207725 = ORIENTED_EDGE('',*,*,#207726,.T.); +#207726 = EDGE_CURVE('',#207718,#207727,#207729,.T.); +#207727 = VERTEX_POINT('',#207728); +#207728 = CARTESIAN_POINT('',(112.614597,-76.963571,1.585)); +#207729 = LINE('',#207730,#207731); +#207730 = CARTESIAN_POINT('',(111.779597,-76.963571,1.585)); +#207731 = VECTOR('',#207732,1.); +#207732 = DIRECTION('',(1.,0.,0.)); +#207733 = ORIENTED_EDGE('',*,*,#207734,.T.); +#207734 = EDGE_CURVE('',#207727,#207735,#207737,.T.); +#207735 = VERTEX_POINT('',#207736); +#207736 = CARTESIAN_POINT('',(112.614597,-76.599999,1.585)); +#207737 = LINE('',#207738,#207739); +#207738 = CARTESIAN_POINT('',(112.614597,-76.963571,1.585)); +#207739 = VECTOR('',#207740,1.); +#207740 = DIRECTION('',(0.,1.,0.)); +#207741 = ORIENTED_EDGE('',*,*,#207742,.T.); +#207742 = EDGE_CURVE('',#207735,#207682,#207743,.T.); +#207743 = LINE('',#207744,#207745); +#207744 = CARTESIAN_POINT('',(112.614597,-76.599999,1.585)); +#207745 = VECTOR('',#207746,1.); +#207746 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207747 = PLANE('',#207748); +#207748 = AXIS2_PLACEMENT_3D('',#207749,#207750,#207751); +#207749 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207750 = DIRECTION('',(0.,0.,1.)); +#207751 = DIRECTION('',(1.,0.,-0.)); +#207752 = SHELL_BASED_SURFACE_MODEL('',(#207753)); +#207753 = OPEN_SHELL('',(#207754)); +#207754 = ADVANCED_FACE('',(#207755),#207824,.T.); +#207755 = FACE_BOUND('',#207756,.F.); +#207756 = EDGE_LOOP('',(#207757,#207768,#207776,#207785,#207793,#207802, + #207810,#207818)); +#207757 = ORIENTED_EDGE('',*,*,#207758,.T.); +#207758 = EDGE_CURVE('',#207759,#207761,#207763,.T.); +#207759 = VERTEX_POINT('',#207760); +#207760 = CARTESIAN_POINT('',(115.159545,-76.575125,1.585)); +#207761 = VERTEX_POINT('',#207762); +#207762 = CARTESIAN_POINT('',(115.284597,-76.599999,1.585)); +#207763 = CIRCLE('',#207764,6.499988811648E-02); +#207764 = AXIS2_PLACEMENT_3D('',#207765,#207766,#207767); +#207765 = CARTESIAN_POINT('',(115.21959711188,-76.5999992701,1.585)); +#207766 = DIRECTION('',(0.,0.,-1.)); +#207767 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207768 = ORIENTED_EDGE('',*,*,#207769,.T.); +#207769 = EDGE_CURVE('',#207761,#207770,#207772,.T.); +#207770 = VERTEX_POINT('',#207771); +#207771 = CARTESIAN_POINT('',(115.284597,-77.028571,1.585)); +#207772 = LINE('',#207773,#207774); +#207773 = CARTESIAN_POINT('',(115.284597,-76.599999,1.585)); +#207774 = VECTOR('',#207775,1.); +#207775 = DIRECTION('',(0.,-1.,0.)); +#207776 = ORIENTED_EDGE('',*,*,#207777,.T.); +#207777 = EDGE_CURVE('',#207770,#207778,#207780,.T.); +#207778 = VERTEX_POINT('',#207779); +#207779 = CARTESIAN_POINT('',(115.219597,-77.093571,1.585)); +#207780 = CIRCLE('',#207781,6.500103935388E-02); +#207781 = AXIS2_PLACEMENT_3D('',#207782,#207783,#207784); +#207782 = CARTESIAN_POINT('',(115.21959596065,-77.02856996065,1.585)); +#207783 = DIRECTION('',(0.,0.,-1.)); +#207784 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#207785 = ORIENTED_EDGE('',*,*,#207786,.T.); +#207786 = EDGE_CURVE('',#207778,#207787,#207789,.T.); +#207787 = VERTEX_POINT('',#207788); +#207788 = CARTESIAN_POINT('',(114.319597,-77.093571,1.585)); +#207789 = LINE('',#207790,#207791); +#207790 = CARTESIAN_POINT('',(115.219597,-77.093571,1.585)); +#207791 = VECTOR('',#207792,1.); +#207792 = DIRECTION('',(-1.,0.,0.)); +#207793 = ORIENTED_EDGE('',*,*,#207794,.T.); +#207794 = EDGE_CURVE('',#207787,#207795,#207797,.T.); +#207795 = VERTEX_POINT('',#207796); +#207796 = CARTESIAN_POINT('',(114.319597,-76.963571,1.585)); +#207797 = CIRCLE('',#207798,6.500000000091E-02); +#207798 = AXIS2_PLACEMENT_3D('',#207799,#207800,#207801); +#207799 = CARTESIAN_POINT('',(114.31959734486,-77.028571,1.585)); +#207800 = DIRECTION('',(0.,0.,-1.)); +#207801 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#207802 = ORIENTED_EDGE('',*,*,#207803,.T.); +#207803 = EDGE_CURVE('',#207795,#207804,#207806,.T.); +#207804 = VERTEX_POINT('',#207805); +#207805 = CARTESIAN_POINT('',(115.154597,-76.963571,1.585)); +#207806 = LINE('',#207807,#207808); +#207807 = CARTESIAN_POINT('',(114.319597,-76.963571,1.585)); +#207808 = VECTOR('',#207809,1.); +#207809 = DIRECTION('',(1.,0.,0.)); +#207810 = ORIENTED_EDGE('',*,*,#207811,.T.); +#207811 = EDGE_CURVE('',#207804,#207812,#207814,.T.); +#207812 = VERTEX_POINT('',#207813); +#207813 = CARTESIAN_POINT('',(115.154597,-76.599999,1.585)); +#207814 = LINE('',#207815,#207816); +#207815 = CARTESIAN_POINT('',(115.154597,-76.963571,1.585)); +#207816 = VECTOR('',#207817,1.); +#207817 = DIRECTION('',(0.,1.,0.)); +#207818 = ORIENTED_EDGE('',*,*,#207819,.T.); +#207819 = EDGE_CURVE('',#207812,#207759,#207820,.T.); +#207820 = LINE('',#207821,#207822); +#207821 = CARTESIAN_POINT('',(115.154597,-76.599999,1.585)); +#207822 = VECTOR('',#207823,1.); +#207823 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207824 = PLANE('',#207825); +#207825 = AXIS2_PLACEMENT_3D('',#207826,#207827,#207828); +#207826 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207827 = DIRECTION('',(0.,0.,1.)); +#207828 = DIRECTION('',(1.,0.,-0.)); +#207829 = SHELL_BASED_SURFACE_MODEL('',(#207830)); +#207830 = OPEN_SHELL('',(#207831)); +#207831 = ADVANCED_FACE('',(#207832),#207909,.T.); +#207832 = FACE_BOUND('',#207833,.F.); +#207833 = EDGE_LOOP('',(#207834,#207845,#207853,#207861,#207870,#207878, + #207886,#207895,#207903)); +#207834 = ORIENTED_EDGE('',*,*,#207835,.T.); +#207835 = EDGE_CURVE('',#207836,#207838,#207840,.T.); +#207836 = VERTEX_POINT('',#207837); +#207837 = CARTESIAN_POINT('',(119.299545,-76.467983,1.585)); +#207838 = VERTEX_POINT('',#207839); +#207839 = CARTESIAN_POINT('',(119.424597,-76.492857,1.585)); +#207840 = CIRCLE('',#207841,6.499988811649E-02); +#207841 = AXIS2_PLACEMENT_3D('',#207842,#207843,#207844); +#207842 = CARTESIAN_POINT('',(119.35959711188,-76.4928572701,1.585)); +#207843 = DIRECTION('',(0.,0.,-1.)); +#207844 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207845 = ORIENTED_EDGE('',*,*,#207846,.T.); +#207846 = EDGE_CURVE('',#207838,#207847,#207849,.T.); +#207847 = VERTEX_POINT('',#207848); +#207848 = CARTESIAN_POINT('',(119.424597,-76.684999,1.585)); +#207849 = LINE('',#207850,#207851); +#207850 = CARTESIAN_POINT('',(119.424597,-76.492857,1.585)); +#207851 = VECTOR('',#207852,1.); +#207852 = DIRECTION('',(0.,-1.,0.)); +#207853 = ORIENTED_EDGE('',*,*,#207854,.T.); +#207854 = EDGE_CURVE('',#207847,#207855,#207857,.T.); +#207855 = VERTEX_POINT('',#207856); +#207856 = CARTESIAN_POINT('',(120.259597,-76.684999,1.585)); +#207857 = LINE('',#207858,#207859); +#207858 = CARTESIAN_POINT('',(119.424597,-76.684999,1.585)); +#207859 = VECTOR('',#207860,1.); +#207860 = DIRECTION('',(1.,0.,0.)); +#207861 = ORIENTED_EDGE('',*,*,#207862,.T.); +#207862 = EDGE_CURVE('',#207855,#207863,#207865,.T.); +#207863 = VERTEX_POINT('',#207864); +#207864 = CARTESIAN_POINT('',(120.259597,-76.814999,1.585)); +#207865 = CIRCLE('',#207866,6.500000000091E-02); +#207866 = AXIS2_PLACEMENT_3D('',#207867,#207868,#207869); +#207867 = CARTESIAN_POINT('',(120.25959665513,-76.749999,1.585)); +#207868 = DIRECTION('',(0.,0.,-1.)); +#207869 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#207870 = ORIENTED_EDGE('',*,*,#207871,.T.); +#207871 = EDGE_CURVE('',#207863,#207872,#207874,.T.); +#207872 = VERTEX_POINT('',#207873); +#207873 = CARTESIAN_POINT('',(119.424597,-76.814999,1.585)); +#207874 = LINE('',#207875,#207876); +#207875 = CARTESIAN_POINT('',(120.259597,-76.814999,1.585)); +#207876 = VECTOR('',#207877,1.); +#207877 = DIRECTION('',(-1.,0.,0.)); +#207878 = ORIENTED_EDGE('',*,*,#207879,.T.); +#207879 = EDGE_CURVE('',#207872,#207880,#207882,.T.); +#207880 = VERTEX_POINT('',#207881); +#207881 = CARTESIAN_POINT('',(119.424597,-77.007142,1.585)); +#207882 = LINE('',#207883,#207884); +#207883 = CARTESIAN_POINT('',(119.424597,-76.814999,1.585)); +#207884 = VECTOR('',#207885,1.); +#207885 = DIRECTION('',(0.,-1.,0.)); +#207886 = ORIENTED_EDGE('',*,*,#207887,.T.); +#207887 = EDGE_CURVE('',#207880,#207888,#207890,.T.); +#207888 = VERTEX_POINT('',#207889); +#207889 = CARTESIAN_POINT('',(119.294597,-77.007142,1.585)); +#207890 = CIRCLE('',#207891,6.500000000092E-02); +#207891 = AXIS2_PLACEMENT_3D('',#207892,#207893,#207894); +#207892 = CARTESIAN_POINT('',(119.359597,-77.00714165513,1.585)); +#207893 = DIRECTION('',(-0.,0.,-1.)); +#207894 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#207895 = ORIENTED_EDGE('',*,*,#207896,.T.); +#207896 = EDGE_CURVE('',#207888,#207897,#207899,.T.); +#207897 = VERTEX_POINT('',#207898); +#207898 = CARTESIAN_POINT('',(119.294597,-76.492857,1.585)); +#207899 = LINE('',#207900,#207901); +#207900 = CARTESIAN_POINT('',(119.294597,-77.007142,1.585)); +#207901 = VECTOR('',#207902,1.); +#207902 = DIRECTION('',(0.,1.,0.)); +#207903 = ORIENTED_EDGE('',*,*,#207904,.T.); +#207904 = EDGE_CURVE('',#207897,#207836,#207905,.T.); +#207905 = LINE('',#207906,#207907); +#207906 = CARTESIAN_POINT('',(119.294597,-76.492857,1.585)); +#207907 = VECTOR('',#207908,1.); +#207908 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207909 = PLANE('',#207910); +#207910 = AXIS2_PLACEMENT_3D('',#207911,#207912,#207913); +#207911 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207912 = DIRECTION('',(0.,0.,1.)); +#207913 = DIRECTION('',(1.,0.,-0.)); +#207914 = SHELL_BASED_SURFACE_MODEL('',(#207915)); +#207915 = OPEN_SHELL('',(#207916)); +#207916 = ADVANCED_FACE('',(#207917),#207994,.T.); +#207917 = FACE_BOUND('',#207918,.F.); +#207918 = EDGE_LOOP('',(#207919,#207930,#207938,#207947,#207955,#207964, + #207972,#207980,#207988)); +#207919 = ORIENTED_EDGE('',*,*,#207920,.T.); +#207920 = EDGE_CURVE('',#207921,#207923,#207925,.T.); +#207921 = VERTEX_POINT('',#207922); +#207922 = CARTESIAN_POINT('',(149.814761,-76.176035,1.585)); +#207923 = VERTEX_POINT('',#207924); +#207924 = CARTESIAN_POINT('',(149.900152,-76.109764,1.585)); +#207925 = CIRCLE('',#207926,6.499990070435E-02); +#207926 = AXIS2_PLACEMENT_3D('',#207927,#207928,#207929); +#207927 = CARTESIAN_POINT('',(149.87959745813,-76.17142839734,1.585)); +#207928 = DIRECTION('',(0.,0.,-1.)); +#207929 = DIRECTION('',(-0.997485495103,-7.087091829067E-02,-0.)); +#207930 = ORIENTED_EDGE('',*,*,#207931,.T.); +#207931 = EDGE_CURVE('',#207923,#207932,#207934,.T.); +#207932 = VERTEX_POINT('',#207933); +#207933 = CARTESIAN_POINT('',(150.800152,-76.409763,1.585)); +#207934 = LINE('',#207935,#207936); +#207935 = CARTESIAN_POINT('',(149.900152,-76.109764,1.585)); +#207936 = VECTOR('',#207937,1.); +#207937 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#207938 = ORIENTED_EDGE('',*,*,#207939,.T.); +#207939 = EDGE_CURVE('',#207932,#207940,#207942,.T.); +#207940 = VERTEX_POINT('',#207941); +#207941 = CARTESIAN_POINT('',(150.800152,-76.533093,1.585)); +#207942 = CIRCLE('',#207943,6.500111611216E-02); +#207943 = AXIS2_PLACEMENT_3D('',#207944,#207945,#207946); +#207944 = CARTESIAN_POINT('',(150.77959542268,-76.471428,1.585)); +#207945 = DIRECTION('',(0.,0.,-1.)); +#207946 = DIRECTION('',(0.316249605277,0.948676018018,0.)); +#207947 = ORIENTED_EDGE('',*,*,#207948,.T.); +#207948 = EDGE_CURVE('',#207940,#207949,#207951,.T.); +#207949 = VERTEX_POINT('',#207950); +#207950 = CARTESIAN_POINT('',(149.900152,-76.833092,1.585)); +#207951 = LINE('',#207952,#207953); +#207952 = CARTESIAN_POINT('',(150.800152,-76.533093,1.585)); +#207953 = VECTOR('',#207954,1.); +#207954 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#207955 = ORIENTED_EDGE('',*,*,#207956,.T.); +#207956 = EDGE_CURVE('',#207949,#207957,#207959,.T.); +#207957 = VERTEX_POINT('',#207958); +#207958 = CARTESIAN_POINT('',(149.859042,-76.709764,1.585)); +#207959 = CIRCLE('',#207960,6.499966862237E-02); +#207960 = AXIS2_PLACEMENT_3D('',#207961,#207962,#207963); +#207961 = CARTESIAN_POINT('',(149.87959712923,-76.77142795692,1.585)); +#207962 = DIRECTION('',(0.,0.,-1.)); +#207963 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#207964 = ORIENTED_EDGE('',*,*,#207965,.T.); +#207965 = EDGE_CURVE('',#207957,#207966,#207968,.T.); +#207966 = VERTEX_POINT('',#207967); +#207967 = CARTESIAN_POINT('',(150.57405,-76.471428,1.585)); +#207968 = LINE('',#207969,#207970); +#207969 = CARTESIAN_POINT('',(149.859042,-76.709764,1.585)); +#207970 = VECTOR('',#207971,1.); +#207971 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#207972 = ORIENTED_EDGE('',*,*,#207973,.T.); +#207973 = EDGE_CURVE('',#207966,#207974,#207976,.T.); +#207974 = VERTEX_POINT('',#207975); +#207975 = CARTESIAN_POINT('',(149.859042,-76.233092,1.585)); +#207976 = LINE('',#207977,#207978); +#207977 = CARTESIAN_POINT('',(150.57405,-76.471428,1.585)); +#207978 = VECTOR('',#207979,1.); +#207979 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#207980 = ORIENTED_EDGE('',*,*,#207981,.T.); +#207981 = EDGE_CURVE('',#207974,#207982,#207984,.T.); +#207982 = VERTEX_POINT('',#207983); +#207983 = CARTESIAN_POINT('',(149.837009,-76.220532,1.585)); +#207984 = LINE('',#207985,#207986); +#207985 = CARTESIAN_POINT('',(149.859042,-76.233092,1.585)); +#207986 = VECTOR('',#207987,1.); +#207987 = DIRECTION('',(-0.868757082859,0.495238458707,0.)); +#207988 = ORIENTED_EDGE('',*,*,#207989,.T.); +#207989 = EDGE_CURVE('',#207982,#207921,#207990,.T.); +#207990 = LINE('',#207991,#207992); +#207991 = CARTESIAN_POINT('',(149.837009,-76.220532,1.585)); +#207992 = VECTOR('',#207993,1.); +#207993 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#207994 = PLANE('',#207995); +#207995 = AXIS2_PLACEMENT_3D('',#207996,#207997,#207998); +#207996 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207997 = DIRECTION('',(0.,0.,1.)); +#207998 = DIRECTION('',(1.,0.,-0.)); +#207999 = SHELL_BASED_SURFACE_MODEL('',(#208000)); +#208000 = OPEN_SHELL('',(#208001)); +#208001 = ADVANCED_FACE('',(#208002,#208169),#208237,.T.); +#208002 = FACE_BOUND('',#208003,.F.); +#208003 = EDGE_LOOP('',(#208004,#208015,#208023,#208031,#208039,#208047, + #208055,#208063,#208071,#208079,#208088,#208096,#208104,#208113, + #208121,#208130,#208138,#208146,#208154,#208163)); +#208004 = ORIENTED_EDGE('',*,*,#208005,.T.); +#208005 = EDGE_CURVE('',#208006,#208008,#208010,.T.); +#208006 = VERTEX_POINT('',#208007); +#208007 = CARTESIAN_POINT('',(101.318122,-75.711919,1.585)); +#208008 = VERTEX_POINT('',#208009); +#208009 = CARTESIAN_POINT('',(101.566303,-75.467693,1.585)); +#208010 = CIRCLE('',#208011,0.3486213829); +#208011 = AXIS2_PLACEMENT_3D('',#208012,#208013,#208014); +#208012 = CARTESIAN_POINT('',(101.65406322951,-75.80508744383,1.585)); +#208013 = DIRECTION('',(0.,0.,-1.)); +#208014 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#208015 = ORIENTED_EDGE('',*,*,#208016,.T.); +#208016 = EDGE_CURVE('',#208008,#208017,#208019,.T.); +#208017 = VERTEX_POINT('',#208018); +#208018 = CARTESIAN_POINT('',(101.786043,-75.467693,1.585)); +#208019 = LINE('',#208020,#208021); +#208020 = CARTESIAN_POINT('',(101.566303,-75.467693,1.585)); +#208021 = VECTOR('',#208022,1.); +#208022 = DIRECTION('',(1.,0.,0.)); +#208023 = ORIENTED_EDGE('',*,*,#208024,.T.); +#208024 = EDGE_CURVE('',#208017,#208025,#208027,.T.); +#208025 = VERTEX_POINT('',#208026); +#208026 = CARTESIAN_POINT('',(101.821452,-75.48242,1.585)); +#208027 = LINE('',#208028,#208029); +#208028 = CARTESIAN_POINT('',(101.786043,-75.467693,1.585)); +#208029 = VECTOR('',#208030,1.); +#208030 = DIRECTION('',(0.923324376396,-0.3840209577,0.)); +#208031 = ORIENTED_EDGE('',*,*,#208032,.T.); +#208032 = EDGE_CURVE('',#208025,#208033,#208035,.T.); +#208033 = VERTEX_POINT('',#208034); +#208034 = CARTESIAN_POINT('',(101.829332,-75.478623,1.585)); +#208035 = LINE('',#208036,#208037); +#208036 = CARTESIAN_POINT('',(101.821452,-75.48242,1.585)); +#208037 = VECTOR('',#208038,1.); +#208038 = DIRECTION('',(0.900870882227,0.434087149724,0.)); +#208039 = ORIENTED_EDGE('',*,*,#208040,.T.); +#208040 = EDGE_CURVE('',#208033,#208041,#208043,.T.); +#208041 = VERTEX_POINT('',#208042); +#208042 = CARTESIAN_POINT('',(101.829332,-75.514564,1.585)); +#208043 = LINE('',#208044,#208045); +#208044 = CARTESIAN_POINT('',(101.829332,-75.478623,1.585)); +#208045 = VECTOR('',#208046,1.); +#208046 = DIRECTION('',(0.,-1.,0.)); +#208047 = ORIENTED_EDGE('',*,*,#208048,.T.); +#208048 = EDGE_CURVE('',#208041,#208049,#208051,.T.); +#208049 = VERTEX_POINT('',#208050); +#208050 = CARTESIAN_POINT('',(101.85173,-75.568636,1.585)); +#208051 = LINE('',#208052,#208053); +#208052 = CARTESIAN_POINT('',(101.829332,-75.514564,1.585)); +#208053 = VECTOR('',#208054,1.); +#208054 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208055 = ORIENTED_EDGE('',*,*,#208056,.T.); +#208056 = EDGE_CURVE('',#208049,#208057,#208059,.T.); +#208057 = VERTEX_POINT('',#208058); +#208058 = CARTESIAN_POINT('',(101.893114,-75.61002,1.585)); +#208059 = LINE('',#208060,#208061); +#208060 = CARTESIAN_POINT('',(101.85173,-75.568636,1.585)); +#208061 = VECTOR('',#208062,1.); +#208062 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#208063 = ORIENTED_EDGE('',*,*,#208064,.T.); +#208064 = EDGE_CURVE('',#208057,#208065,#208067,.T.); +#208065 = VERTEX_POINT('',#208066); +#208066 = CARTESIAN_POINT('',(101.941364,-75.630006,1.585)); +#208067 = LINE('',#208068,#208069); +#208068 = CARTESIAN_POINT('',(101.893114,-75.61002,1.585)); +#208069 = VECTOR('',#208070,1.); +#208070 = DIRECTION('',(0.923878208238,-0.382686629427,0.)); +#208071 = ORIENTED_EDGE('',*,*,#208072,.T.); +#208072 = EDGE_CURVE('',#208065,#208073,#208075,.T.); +#208073 = VERTEX_POINT('',#208074); +#208074 = CARTESIAN_POINT('',(101.938986,-76.370586,1.585)); +#208075 = LINE('',#208076,#208077); +#208076 = CARTESIAN_POINT('',(101.941364,-75.630006,1.585)); +#208077 = VECTOR('',#208078,1.); +#208078 = DIRECTION('',(-3.21098023293E-03,-0.99999484479,0.)); +#208079 = ORIENTED_EDGE('',*,*,#208080,.T.); +#208080 = EDGE_CURVE('',#208073,#208081,#208083,.T.); +#208081 = VERTEX_POINT('',#208082); +#208082 = CARTESIAN_POINT('',(101.690805,-76.614811,1.585)); +#208083 = CIRCLE('',#208084,0.348632345849); +#208084 = AXIS2_PLACEMENT_3D('',#208085,#208086,#208087); +#208085 = CARTESIAN_POINT('',(101.60303619403,-76.2774074593,1.585)); +#208086 = DIRECTION('',(0.,0.,-1.)); +#208087 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#208088 = ORIENTED_EDGE('',*,*,#208089,.T.); +#208089 = EDGE_CURVE('',#208081,#208090,#208092,.T.); +#208090 = VERTEX_POINT('',#208091); +#208091 = CARTESIAN_POINT('',(101.513506,-76.613589,1.585)); +#208092 = LINE('',#208093,#208094); +#208093 = CARTESIAN_POINT('',(101.690805,-76.614811,1.585)); +#208094 = VECTOR('',#208095,1.); +#208095 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#208096 = ORIENTED_EDGE('',*,*,#208097,.T.); +#208097 = EDGE_CURVE('',#208090,#208098,#208100,.T.); +#208098 = VERTEX_POINT('',#208099); +#208099 = CARTESIAN_POINT('',(101.392094,-76.552883,1.585)); +#208100 = LINE('',#208101,#208102); +#208101 = CARTESIAN_POINT('',(101.513506,-76.613589,1.585)); +#208102 = VECTOR('',#208103,1.); +#208103 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#208104 = ORIENTED_EDGE('',*,*,#208105,.T.); +#208105 = EDGE_CURVE('',#208098,#208106,#208108,.T.); +#208106 = VERTEX_POINT('',#208107); +#208107 = CARTESIAN_POINT('',(101.471619,-76.426551,1.585)); +#208108 = CIRCLE('',#208109,7.500029440361E-02); +#208109 = AXIS2_PLACEMENT_3D('',#208110,#208111,#208112); +#208110 = CARTESIAN_POINT('',(101.43807794602,-76.49363335132,1.585)); +#208111 = DIRECTION('',(0.,0.,-1.)); +#208112 = DIRECTION('',(-0.613116873665,-0.789992214662,-0.)); +#208113 = ORIENTED_EDGE('',*,*,#208114,.T.); +#208114 = EDGE_CURVE('',#208106,#208115,#208117,.T.); +#208115 = VERTEX_POINT('',#208116); +#208116 = CARTESIAN_POINT('',(101.551021,-76.466252,1.585)); +#208117 = LINE('',#208118,#208119); +#208118 = CARTESIAN_POINT('',(101.471619,-76.426551,1.585)); +#208119 = VECTOR('',#208120,1.); +#208120 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#208121 = ORIENTED_EDGE('',*,*,#208122,.T.); +#208122 = EDGE_CURVE('',#208115,#208123,#208125,.T.); +#208123 = VERTEX_POINT('',#208124); +#208124 = CARTESIAN_POINT('',(101.757391,-76.401587,1.585)); +#208125 = CIRCLE('',#208126,0.197624884179); +#208126 = AXIS2_PLACEMENT_3D('',#208127,#208128,#208129); +#208127 = CARTESIAN_POINT('',(101.6047445,-76.27606950765,1.585)); +#208128 = DIRECTION('',(0.,0.,1.)); +#208129 = DIRECTION('',(-0.271845826618,-0.962340816213,0.)); +#208130 = ORIENTED_EDGE('',*,*,#208131,.T.); +#208131 = EDGE_CURVE('',#208123,#208132,#208134,.T.); +#208132 = VERTEX_POINT('',#208133); +#208133 = CARTESIAN_POINT('',(101.791649,-76.333071,1.585)); +#208134 = LINE('',#208135,#208136); +#208135 = CARTESIAN_POINT('',(101.757391,-76.401587,1.585)); +#208136 = VECTOR('',#208137,1.); +#208137 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#208138 = ORIENTED_EDGE('',*,*,#208139,.T.); +#208139 = EDGE_CURVE('',#208132,#208140,#208142,.T.); +#208140 = VERTEX_POINT('',#208141); +#208141 = CARTESIAN_POINT('',(101.79122,-76.280256,1.585)); +#208142 = LINE('',#208143,#208144); +#208143 = CARTESIAN_POINT('',(101.791649,-76.333071,1.585)); +#208144 = VECTOR('',#208145,1.); +#208145 = DIRECTION('',(-8.122424470358E-03,0.999967012566,0.)); +#208146 = ORIENTED_EDGE('',*,*,#208147,.T.); +#208147 = EDGE_CURVE('',#208140,#208148,#208150,.T.); +#208148 = VERTEX_POINT('',#208149); +#208149 = CARTESIAN_POINT('',(101.561125,-76.280256,1.585)); +#208150 = LINE('',#208151,#208152); +#208151 = CARTESIAN_POINT('',(101.79122,-76.280256,1.585)); +#208152 = VECTOR('',#208153,1.); +#208153 = DIRECTION('',(-1.,0.,0.)); +#208154 = ORIENTED_EDGE('',*,*,#208155,.T.); +#208155 = EDGE_CURVE('',#208148,#208156,#208158,.T.); +#208156 = VERTEX_POINT('',#208157); +#208157 = CARTESIAN_POINT('',(101.3169,-76.032074,1.585)); +#208158 = CIRCLE('',#208159,0.348628446662); +#208159 = AXIS2_PLACEMENT_3D('',#208160,#208161,#208162); +#208160 = CARTESIAN_POINT('',(101.65430061322,-75.94430942847,1.585)); +#208161 = DIRECTION('',(0.,0.,-1.)); +#208162 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#208163 = ORIENTED_EDGE('',*,*,#208164,.T.); +#208164 = EDGE_CURVE('',#208156,#208006,#208165,.T.); +#208165 = LINE('',#208166,#208167); +#208166 = CARTESIAN_POINT('',(101.3169,-76.032074,1.585)); +#208167 = VECTOR('',#208168,1.); +#208168 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#208169 = FACE_BOUND('',#208170,.F.); +#208170 = EDGE_LOOP('',(#208171,#208181,#208189,#208198,#208206,#208215, + #208223,#208231)); +#208171 = ORIENTED_EDGE('',*,*,#208172,.T.); +#208172 = EDGE_CURVE('',#208173,#208175,#208177,.T.); +#208173 = VERTEX_POINT('',#208174); +#208174 = CARTESIAN_POINT('',(101.791649,-75.635223,1.585)); +#208175 = VERTEX_POINT('',#208176); +#208176 = CARTESIAN_POINT('',(101.753706,-75.616252,1.585)); +#208177 = LINE('',#208178,#208179); +#208178 = CARTESIAN_POINT('',(101.791649,-75.635223,1.585)); +#208179 = VECTOR('',#208180,1.); +#208180 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#208181 = ORIENTED_EDGE('',*,*,#208182,.T.); +#208182 = EDGE_CURVE('',#208175,#208183,#208185,.T.); +#208183 = VERTEX_POINT('',#208184); +#208184 = CARTESIAN_POINT('',(101.59864,-75.616252,1.585)); +#208185 = LINE('',#208186,#208187); +#208186 = CARTESIAN_POINT('',(101.753706,-75.616252,1.585)); +#208187 = VECTOR('',#208188,1.); +#208188 = DIRECTION('',(-1.,0.,0.)); +#208189 = ORIENTED_EDGE('',*,*,#208190,.T.); +#208190 = EDGE_CURVE('',#208183,#208191,#208193,.T.); +#208191 = VERTEX_POINT('',#208192); +#208192 = CARTESIAN_POINT('',(101.465459,-75.749433,1.585)); +#208193 = CIRCLE('',#208194,0.18686440374); +#208194 = AXIS2_PLACEMENT_3D('',#208195,#208196,#208197); +#208195 = CARTESIAN_POINT('',(101.646176,-75.796969,1.585)); +#208196 = DIRECTION('',(0.,0.,1.)); +#208197 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#208198 = ORIENTED_EDGE('',*,*,#208199,.T.); +#208199 = EDGE_CURVE('',#208191,#208200,#208202,.T.); +#208200 = VERTEX_POINT('',#208201); +#208201 = CARTESIAN_POINT('',(101.465459,-75.999737,1.585)); +#208202 = LINE('',#208203,#208204); +#208203 = CARTESIAN_POINT('',(101.465459,-75.749433,1.585)); +#208204 = VECTOR('',#208205,1.); +#208205 = DIRECTION('',(0.,-1.,0.)); +#208206 = ORIENTED_EDGE('',*,*,#208207,.T.); +#208207 = EDGE_CURVE('',#208200,#208208,#208210,.T.); +#208208 = VERTEX_POINT('',#208209); +#208209 = CARTESIAN_POINT('',(101.59864,-76.132919,1.585)); +#208210 = CIRCLE('',#208211,0.186867373533); +#208211 = AXIS2_PLACEMENT_3D('',#208212,#208213,#208214); +#208212 = CARTESIAN_POINT('',(101.64617871388,-75.95219964305,1.585)); +#208213 = DIRECTION('',(0.,0.,1.)); +#208214 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#208215 = ORIENTED_EDGE('',*,*,#208216,.T.); +#208216 = EDGE_CURVE('',#208208,#208217,#208219,.T.); +#208217 = VERTEX_POINT('',#208218); +#208218 = CARTESIAN_POINT('',(101.753706,-76.132919,1.585)); +#208219 = LINE('',#208220,#208221); +#208220 = CARTESIAN_POINT('',(101.59864,-76.132919,1.585)); +#208221 = VECTOR('',#208222,1.); +#208222 = DIRECTION('',(1.,0.,0.)); +#208223 = ORIENTED_EDGE('',*,*,#208224,.T.); +#208224 = EDGE_CURVE('',#208217,#208225,#208227,.T.); +#208225 = VERTEX_POINT('',#208226); +#208226 = CARTESIAN_POINT('',(101.791649,-76.113947,1.585)); +#208227 = LINE('',#208228,#208229); +#208228 = CARTESIAN_POINT('',(101.753706,-76.132919,1.585)); +#208229 = VECTOR('',#208230,1.); +#208230 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#208231 = ORIENTED_EDGE('',*,*,#208232,.T.); +#208232 = EDGE_CURVE('',#208225,#208173,#208233,.T.); +#208233 = LINE('',#208234,#208235); +#208234 = CARTESIAN_POINT('',(101.791649,-76.113947,1.585)); +#208235 = VECTOR('',#208236,1.); +#208236 = DIRECTION('',(0.,1.,0.)); +#208237 = PLANE('',#208238); +#208238 = AXIS2_PLACEMENT_3D('',#208239,#208240,#208241); +#208239 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208240 = DIRECTION('',(0.,0.,1.)); +#208241 = DIRECTION('',(1.,0.,-0.)); +#208242 = SHELL_BASED_SURFACE_MODEL('',(#208243)); +#208243 = OPEN_SHELL('',(#208244)); +#208244 = ADVANCED_FACE('',(#208245,#208314),#208340,.T.); +#208245 = FACE_BOUND('',#208246,.F.); +#208246 = EDGE_LOOP('',(#208247,#208258,#208266,#208275,#208283,#208291, + #208299,#208308)); +#208247 = ORIENTED_EDGE('',*,*,#208248,.T.); +#208248 = EDGE_CURVE('',#208249,#208251,#208253,.T.); +#208249 = VERTEX_POINT('',#208250); +#208250 = CARTESIAN_POINT('',(132.089042,-76.290235,1.585)); +#208251 = VERTEX_POINT('',#208252); +#208252 = CARTESIAN_POINT('',(132.089042,-76.166907,1.585)); +#208253 = CIRCLE('',#208254,6.499975994819E-02); +#208254 = AXIS2_PLACEMENT_3D('',#208255,#208256,#208257); +#208255 = CARTESIAN_POINT('',(132.10959728879,-76.228571,1.585)); +#208256 = DIRECTION('',(0.,0.,-1.)); +#208257 = DIRECTION('',(-0.316236380079,-0.948680426653,-0.)); +#208258 = ORIENTED_EDGE('',*,*,#208259,.T.); +#208259 = EDGE_CURVE('',#208251,#208260,#208262,.T.); +#208260 = VERTEX_POINT('',#208261); +#208261 = CARTESIAN_POINT('',(132.989042,-75.866907,1.585)); +#208262 = LINE('',#208263,#208264); +#208263 = CARTESIAN_POINT('',(132.089042,-76.166907,1.585)); +#208264 = VECTOR('',#208265,1.); +#208265 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#208266 = ORIENTED_EDGE('',*,*,#208267,.T.); +#208267 = EDGE_CURVE('',#208260,#208268,#208270,.T.); +#208268 = VERTEX_POINT('',#208269); +#208269 = CARTESIAN_POINT('',(133.030152,-75.990236,1.585)); +#208270 = CIRCLE('',#208271,6.500014296397E-02); +#208271 = AXIS2_PLACEMENT_3D('',#208272,#208273,#208274); +#208272 = CARTESIAN_POINT('',(133.00959672008,-75.9285715933,1.585)); +#208273 = DIRECTION('',(0.,0.,-1.)); +#208274 = DIRECTION('',(-0.316225767373,0.948683964263,-0.)); +#208275 = ORIENTED_EDGE('',*,*,#208276,.T.); +#208276 = EDGE_CURVE('',#208268,#208277,#208279,.T.); +#208277 = VERTEX_POINT('',#208278); +#208278 = CARTESIAN_POINT('',(132.817454,-76.061135,1.585)); +#208279 = LINE('',#208280,#208281); +#208280 = CARTESIAN_POINT('',(133.030152,-75.990236,1.585)); +#208281 = VECTOR('',#208282,1.); +#208282 = DIRECTION('',(-0.948683744073,-0.316226427945,0.)); +#208283 = ORIENTED_EDGE('',*,*,#208284,.T.); +#208284 = EDGE_CURVE('',#208277,#208285,#208287,.T.); +#208285 = VERTEX_POINT('',#208286); +#208286 = CARTESIAN_POINT('',(132.817454,-76.396006,1.585)); +#208287 = LINE('',#208288,#208289); +#208288 = CARTESIAN_POINT('',(132.817454,-76.061135,1.585)); +#208289 = VECTOR('',#208290,1.); +#208290 = DIRECTION('',(0.,-1.,0.)); +#208291 = ORIENTED_EDGE('',*,*,#208292,.T.); +#208292 = EDGE_CURVE('',#208285,#208293,#208295,.T.); +#208293 = VERTEX_POINT('',#208294); +#208294 = CARTESIAN_POINT('',(133.030152,-76.466906,1.585)); +#208295 = LINE('',#208296,#208297); +#208296 = CARTESIAN_POINT('',(132.817454,-76.396006,1.585)); +#208297 = VECTOR('',#208298,1.); +#208298 = DIRECTION('',(0.948682406,-0.316230442155,0.)); +#208299 = ORIENTED_EDGE('',*,*,#208300,.T.); +#208300 = EDGE_CURVE('',#208293,#208301,#208303,.T.); +#208301 = VERTEX_POINT('',#208302); +#208302 = CARTESIAN_POINT('',(132.989042,-76.590235,1.585)); +#208303 = CIRCLE('',#208304,6.500014296694E-02); +#208304 = AXIS2_PLACEMENT_3D('',#208305,#208306,#208307); +#208305 = CARTESIAN_POINT('',(133.00959634729,-76.52857028242,1.585)); +#208306 = DIRECTION('',(0.,0.,-1.)); +#208307 = DIRECTION('',(0.316240115321,0.948679181527,0.)); +#208308 = ORIENTED_EDGE('',*,*,#208309,.T.); +#208309 = EDGE_CURVE('',#208301,#208249,#208310,.T.); +#208310 = LINE('',#208311,#208312); +#208311 = CARTESIAN_POINT('',(132.989042,-76.590235,1.585)); +#208312 = VECTOR('',#208313,1.); +#208313 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#208314 = FACE_BOUND('',#208315,.F.); +#208315 = EDGE_LOOP('',(#208316,#208326,#208334)); +#208316 = ORIENTED_EDGE('',*,*,#208317,.T.); +#208317 = EDGE_CURVE('',#208318,#208320,#208322,.T.); +#208318 = VERTEX_POINT('',#208319); +#208319 = CARTESIAN_POINT('',(132.315144,-76.228571,1.585)); +#208320 = VERTEX_POINT('',#208321); +#208321 = CARTESIAN_POINT('',(132.687454,-76.352673,1.585)); +#208322 = LINE('',#208323,#208324); +#208323 = CARTESIAN_POINT('',(132.315144,-76.228571,1.585)); +#208324 = VECTOR('',#208325,1.); +#208325 = DIRECTION('',(0.948684317287,-0.316224708291,0.)); +#208326 = ORIENTED_EDGE('',*,*,#208327,.T.); +#208327 = EDGE_CURVE('',#208320,#208328,#208330,.T.); +#208328 = VERTEX_POINT('',#208329); +#208329 = CARTESIAN_POINT('',(132.687454,-76.104468,1.585)); +#208330 = LINE('',#208331,#208332); +#208331 = CARTESIAN_POINT('',(132.687454,-76.352673,1.585)); +#208332 = VECTOR('',#208333,1.); +#208333 = DIRECTION('',(0.,1.,0.)); +#208334 = ORIENTED_EDGE('',*,*,#208335,.T.); +#208335 = EDGE_CURVE('',#208328,#208318,#208336,.T.); +#208336 = LINE('',#208337,#208338); +#208337 = CARTESIAN_POINT('',(132.687454,-76.104468,1.585)); +#208338 = VECTOR('',#208339,1.); +#208339 = DIRECTION('',(-0.94868355286,-0.316227001586,0.)); +#208340 = PLANE('',#208341); +#208341 = AXIS2_PLACEMENT_3D('',#208342,#208343,#208344); +#208342 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208343 = DIRECTION('',(0.,0.,1.)); +#208344 = DIRECTION('',(1.,0.,-0.)); +#208345 = SHELL_BASED_SURFACE_MODEL('',(#208346)); +#208346 = OPEN_SHELL('',(#208347)); +#208347 = ADVANCED_FACE('',(#208348),#208425,.T.); +#208348 = FACE_BOUND('',#208349,.F.); +#208349 = EDGE_LOOP('',(#208350,#208361,#208369,#208377,#208386,#208394, + #208402,#208411,#208419)); +#208350 = ORIENTED_EDGE('',*,*,#208351,.T.); +#208351 = EDGE_CURVE('',#208352,#208354,#208356,.T.); +#208352 = VERTEX_POINT('',#208353); +#208353 = CARTESIAN_POINT('',(134.549545,-75.967983,1.585)); +#208354 = VERTEX_POINT('',#208355); +#208355 = CARTESIAN_POINT('',(134.674597,-75.992857,1.585)); +#208356 = CIRCLE('',#208357,6.499988811649E-02); +#208357 = AXIS2_PLACEMENT_3D('',#208358,#208359,#208360); +#208358 = CARTESIAN_POINT('',(134.60959711188,-75.9928572701,1.585)); +#208359 = DIRECTION('',(0.,0.,-1.)); +#208360 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#208361 = ORIENTED_EDGE('',*,*,#208362,.T.); +#208362 = EDGE_CURVE('',#208354,#208363,#208365,.T.); +#208363 = VERTEX_POINT('',#208364); +#208364 = CARTESIAN_POINT('',(134.674597,-76.184999,1.585)); +#208365 = LINE('',#208366,#208367); +#208366 = CARTESIAN_POINT('',(134.674597,-75.992857,1.585)); +#208367 = VECTOR('',#208368,1.); +#208368 = DIRECTION('',(0.,-1.,0.)); +#208369 = ORIENTED_EDGE('',*,*,#208370,.T.); +#208370 = EDGE_CURVE('',#208363,#208371,#208373,.T.); +#208371 = VERTEX_POINT('',#208372); +#208372 = CARTESIAN_POINT('',(135.509597,-76.184999,1.585)); +#208373 = LINE('',#208374,#208375); +#208374 = CARTESIAN_POINT('',(134.674597,-76.184999,1.585)); +#208375 = VECTOR('',#208376,1.); +#208376 = DIRECTION('',(1.,0.,0.)); +#208377 = ORIENTED_EDGE('',*,*,#208378,.T.); +#208378 = EDGE_CURVE('',#208371,#208379,#208381,.T.); +#208379 = VERTEX_POINT('',#208380); +#208380 = CARTESIAN_POINT('',(135.509597,-76.314999,1.585)); +#208381 = CIRCLE('',#208382,6.500000000091E-02); +#208382 = AXIS2_PLACEMENT_3D('',#208383,#208384,#208385); +#208383 = CARTESIAN_POINT('',(135.50959665513,-76.249999,1.585)); +#208384 = DIRECTION('',(0.,0.,-1.)); +#208385 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#208386 = ORIENTED_EDGE('',*,*,#208387,.T.); +#208387 = EDGE_CURVE('',#208379,#208388,#208390,.T.); +#208388 = VERTEX_POINT('',#208389); +#208389 = CARTESIAN_POINT('',(134.674597,-76.314999,1.585)); +#208390 = LINE('',#208391,#208392); +#208391 = CARTESIAN_POINT('',(135.509597,-76.314999,1.585)); +#208392 = VECTOR('',#208393,1.); +#208393 = DIRECTION('',(-1.,0.,0.)); +#208394 = ORIENTED_EDGE('',*,*,#208395,.T.); +#208395 = EDGE_CURVE('',#208388,#208396,#208398,.T.); +#208396 = VERTEX_POINT('',#208397); +#208397 = CARTESIAN_POINT('',(134.674597,-76.507142,1.585)); +#208398 = LINE('',#208399,#208400); +#208399 = CARTESIAN_POINT('',(134.674597,-76.314999,1.585)); +#208400 = VECTOR('',#208401,1.); +#208401 = DIRECTION('',(0.,-1.,0.)); +#208402 = ORIENTED_EDGE('',*,*,#208403,.T.); +#208403 = EDGE_CURVE('',#208396,#208404,#208406,.T.); +#208404 = VERTEX_POINT('',#208405); +#208405 = CARTESIAN_POINT('',(134.544597,-76.507142,1.585)); +#208406 = CIRCLE('',#208407,6.500000000091E-02); +#208407 = AXIS2_PLACEMENT_3D('',#208408,#208409,#208410); +#208408 = CARTESIAN_POINT('',(134.609597,-76.50714165513,1.585)); +#208409 = DIRECTION('',(-0.,0.,-1.)); +#208410 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#208411 = ORIENTED_EDGE('',*,*,#208412,.T.); +#208412 = EDGE_CURVE('',#208404,#208413,#208415,.T.); +#208413 = VERTEX_POINT('',#208414); +#208414 = CARTESIAN_POINT('',(134.544597,-75.992857,1.585)); +#208415 = LINE('',#208416,#208417); +#208416 = CARTESIAN_POINT('',(134.544597,-76.507142,1.585)); +#208417 = VECTOR('',#208418,1.); +#208418 = DIRECTION('',(0.,1.,0.)); +#208419 = ORIENTED_EDGE('',*,*,#208420,.T.); +#208420 = EDGE_CURVE('',#208413,#208352,#208421,.T.); +#208421 = LINE('',#208422,#208423); +#208422 = CARTESIAN_POINT('',(134.544597,-75.992857,1.585)); +#208423 = VECTOR('',#208424,1.); +#208424 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#208425 = PLANE('',#208426); +#208426 = AXIS2_PLACEMENT_3D('',#208427,#208428,#208429); +#208427 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208428 = DIRECTION('',(0.,0.,1.)); +#208429 = DIRECTION('',(1.,0.,-0.)); +#208430 = SHELL_BASED_SURFACE_MODEL('',(#208431)); +#208431 = OPEN_SHELL('',(#208432)); +#208432 = ADVANCED_FACE('',(#208433),#208592,.T.); +#208433 = FACE_BOUND('',#208434,.F.); +#208434 = EDGE_LOOP('',(#208435,#208445,#208453,#208461,#208469,#208477, + #208486,#208494,#208503,#208511,#208519,#208527,#208536,#208544, + #208552,#208560,#208569,#208577,#208586)); +#208435 = ORIENTED_EDGE('',*,*,#208436,.T.); +#208436 = EDGE_CURVE('',#208437,#208439,#208441,.T.); +#208437 = VERTEX_POINT('',#208438); +#208438 = CARTESIAN_POINT('',(109.288013,-75.819676,1.585)); +#208439 = VERTEX_POINT('',#208440); +#208440 = CARTESIAN_POINT('',(109.396368,-75.766486,1.585)); +#208441 = LINE('',#208442,#208443); +#208442 = CARTESIAN_POINT('',(109.288013,-75.819676,1.585)); +#208443 = VECTOR('',#208444,1.); +#208444 = DIRECTION('',(0.897675654444,0.440656804576,0.)); +#208445 = ORIENTED_EDGE('',*,*,#208446,.T.); +#208446 = EDGE_CURVE('',#208439,#208447,#208449,.T.); +#208447 = VERTEX_POINT('',#208448); +#208448 = CARTESIAN_POINT('',(109.506962,-75.765604,1.585)); +#208449 = LINE('',#208450,#208451); +#208450 = CARTESIAN_POINT('',(109.396368,-75.766486,1.585)); +#208451 = VECTOR('',#208452,1.); +#208452 = DIRECTION('',(0.999968200278,7.97486258431E-03,0.)); +#208453 = ORIENTED_EDGE('',*,*,#208454,.T.); +#208454 = EDGE_CURVE('',#208447,#208455,#208457,.T.); +#208455 = VERTEX_POINT('',#208456); +#208456 = CARTESIAN_POINT('',(109.658854,-75.817168,1.585)); +#208457 = LINE('',#208458,#208459); +#208458 = CARTESIAN_POINT('',(109.506962,-75.765604,1.585)); +#208459 = VECTOR('',#208460,1.); +#208460 = DIRECTION('',(0.946923272019,-0.321459666068,0.)); +#208461 = ORIENTED_EDGE('',*,*,#208462,.T.); +#208462 = EDGE_CURVE('',#208455,#208463,#208465,.T.); +#208463 = VERTEX_POINT('',#208464); +#208464 = CARTESIAN_POINT('',(110.074597,-76.22879,1.585)); +#208465 = LINE('',#208466,#208467); +#208466 = CARTESIAN_POINT('',(109.658854,-75.817168,1.585)); +#208467 = VECTOR('',#208468,1.); +#208468 = DIRECTION('',(0.710619975405,-0.703576044615,0.)); +#208469 = ORIENTED_EDGE('',*,*,#208470,.T.); +#208470 = EDGE_CURVE('',#208463,#208471,#208473,.T.); +#208471 = VERTEX_POINT('',#208472); +#208472 = CARTESIAN_POINT('',(110.074597,-75.828571,1.585)); +#208473 = LINE('',#208474,#208475); +#208474 = CARTESIAN_POINT('',(110.074597,-76.22879,1.585)); +#208475 = VECTOR('',#208476,1.); +#208476 = DIRECTION('',(0.,1.,0.)); +#208477 = ORIENTED_EDGE('',*,*,#208478,.T.); +#208478 = EDGE_CURVE('',#208471,#208479,#208481,.T.); +#208479 = VERTEX_POINT('',#208480); +#208480 = CARTESIAN_POINT('',(110.204597,-75.828571,1.585)); +#208481 = CIRCLE('',#208482,6.500000000092E-02); +#208482 = AXIS2_PLACEMENT_3D('',#208483,#208484,#208485); +#208483 = CARTESIAN_POINT('',(110.139597,-75.82857134486,1.585)); +#208484 = DIRECTION('',(0.,0.,-1.)); +#208485 = DIRECTION('',(-0.999999999986,5.305658025668E-06,0.)); +#208486 = ORIENTED_EDGE('',*,*,#208487,.T.); +#208487 = EDGE_CURVE('',#208479,#208488,#208490,.T.); +#208488 = VERTEX_POINT('',#208489); +#208489 = CARTESIAN_POINT('',(110.204597,-76.385714,1.585)); +#208490 = LINE('',#208491,#208492); +#208491 = CARTESIAN_POINT('',(110.204597,-75.828571,1.585)); +#208492 = VECTOR('',#208493,1.); +#208493 = DIRECTION('',(0.,-1.,0.)); +#208494 = ORIENTED_EDGE('',*,*,#208495,.T.); +#208495 = EDGE_CURVE('',#208488,#208496,#208498,.T.); +#208496 = VERTEX_POINT('',#208497); +#208497 = CARTESIAN_POINT('',(110.093635,-76.431676,1.585)); +#208498 = CIRCLE('',#208499,6.50002653555E-02); +#208499 = AXIS2_PLACEMENT_3D('',#208500,#208501,#208502); +#208500 = CARTESIAN_POINT('',(110.13959673464,-76.38571347782,1.585)); +#208501 = DIRECTION('',(-0.,0.,-1.)); +#208502 = DIRECTION('',(0.999999999968,-8.033407537946E-06,-0.)); +#208503 = ORIENTED_EDGE('',*,*,#208504,.T.); +#208504 = EDGE_CURVE('',#208496,#208505,#208507,.T.); +#208505 = VERTEX_POINT('',#208506); +#208506 = CARTESIAN_POINT('',(109.590198,-75.928239,1.585)); +#208507 = LINE('',#208508,#208509); +#208508 = CARTESIAN_POINT('',(110.093635,-76.431676,1.585)); +#208509 = VECTOR('',#208510,1.); +#208510 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208511 = ORIENTED_EDGE('',*,*,#208512,.T.); +#208512 = EDGE_CURVE('',#208505,#208513,#208515,.T.); +#208513 = VERTEX_POINT('',#208514); +#208514 = CARTESIAN_POINT('',(109.486193,-75.893571,1.585)); +#208515 = LINE('',#208516,#208517); +#208516 = CARTESIAN_POINT('',(109.590198,-75.928239,1.585)); +#208517 = VECTOR('',#208518,1.); +#208518 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#208519 = ORIENTED_EDGE('',*,*,#208520,.T.); +#208520 = EDGE_CURVE('',#208513,#208521,#208523,.T.); +#208521 = VERTEX_POINT('',#208522); +#208522 = CARTESIAN_POINT('',(109.42637,-75.893571,1.585)); +#208523 = LINE('',#208524,#208525); +#208524 = CARTESIAN_POINT('',(109.486193,-75.893571,1.585)); +#208525 = VECTOR('',#208526,1.); +#208526 = DIRECTION('',(-1.,0.,0.)); +#208527 = ORIENTED_EDGE('',*,*,#208528,.T.); +#208528 = EDGE_CURVE('',#208521,#208529,#208531,.T.); +#208529 = VERTEX_POINT('',#208530); +#208530 = CARTESIAN_POINT('',(109.304597,-76.015345,1.585)); +#208531 = CIRCLE('',#208532,0.170996278941); +#208532 = AXIS2_PLACEMENT_3D('',#208533,#208534,#208535); +#208533 = CARTESIAN_POINT('',(109.46994764214,-76.05892128429,1.585)); +#208534 = DIRECTION('',(0.,0.,1.)); +#208535 = DIRECTION('',(-0.254845558146,0.966981768956,0.)); +#208536 = ORIENTED_EDGE('',*,*,#208537,.T.); +#208537 = EDGE_CURVE('',#208529,#208538,#208540,.T.); +#208538 = VERTEX_POINT('',#208539); +#208539 = CARTESIAN_POINT('',(109.304597,-76.198941,1.585)); +#208540 = LINE('',#208541,#208542); +#208541 = CARTESIAN_POINT('',(109.304597,-76.015345,1.585)); +#208542 = VECTOR('',#208543,1.); +#208543 = DIRECTION('',(0.,-1.,0.)); +#208544 = ORIENTED_EDGE('',*,*,#208545,.T.); +#208545 = EDGE_CURVE('',#208538,#208546,#208548,.T.); +#208546 = VERTEX_POINT('',#208547); +#208547 = CARTESIAN_POINT('',(109.335875,-76.261497,1.585)); +#208548 = LINE('',#208549,#208550); +#208549 = CARTESIAN_POINT('',(109.304597,-76.198941,1.585)); +#208550 = VECTOR('',#208551,1.); +#208551 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#208552 = ORIENTED_EDGE('',*,*,#208553,.T.); +#208553 = EDGE_CURVE('',#208546,#208554,#208556,.T.); +#208554 = VERTEX_POINT('',#208555); +#208555 = CARTESIAN_POINT('',(109.371273,-76.296895,1.585)); +#208556 = LINE('',#208557,#208558); +#208557 = CARTESIAN_POINT('',(109.335875,-76.261497,1.585)); +#208558 = VECTOR('',#208559,1.); +#208559 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#208560 = ORIENTED_EDGE('',*,*,#208561,.T.); +#208561 = EDGE_CURVE('',#208554,#208562,#208564,.T.); +#208562 = VERTEX_POINT('',#208563); +#208563 = CARTESIAN_POINT('',(109.279349,-76.388819,1.585)); +#208564 = CIRCLE('',#208565,6.50000837538E-02); +#208565 = AXIS2_PLACEMENT_3D('',#208566,#208567,#208568); +#208566 = CARTESIAN_POINT('',(109.32531098493,-76.34285698493,1.585)); +#208567 = DIRECTION('',(0.,0.,-1.)); +#208568 = DIRECTION('',(0.707107012969,0.707106549404,0.)); +#208569 = ORIENTED_EDGE('',*,*,#208570,.T.); +#208570 = EDGE_CURVE('',#208562,#208571,#208573,.T.); +#208571 = VERTEX_POINT('',#208572); +#208572 = CARTESIAN_POINT('',(109.224316,-76.329069,1.585)); +#208573 = LINE('',#208574,#208575); +#208574 = CARTESIAN_POINT('',(109.279349,-76.388819,1.585)); +#208575 = VECTOR('',#208576,1.); +#208576 = DIRECTION('',(-0.677476455829,0.735544459429,0.)); +#208577 = ORIENTED_EDGE('',*,*,#208578,.T.); +#208578 = EDGE_CURVE('',#208571,#208579,#208581,.T.); +#208579 = VERTEX_POINT('',#208580); +#208580 = CARTESIAN_POINT('',(109.230707,-75.876981,1.585)); +#208581 = CIRCLE('',#208582,0.40799528995); +#208582 = AXIS2_PLACEMENT_3D('',#208583,#208584,#208585); +#208583 = CARTESIAN_POINT('',(109.567115692,-76.10782585822,1.585)); +#208584 = DIRECTION('',(0.,0.,-1.)); +#208585 = DIRECTION('',(-0.840205023064,-0.542268862483,-0.)); +#208586 = ORIENTED_EDGE('',*,*,#208587,.T.); +#208587 = EDGE_CURVE('',#208579,#208437,#208588,.T.); +#208588 = LINE('',#208589,#208590); +#208589 = CARTESIAN_POINT('',(109.230707,-75.876981,1.585)); +#208590 = VECTOR('',#208591,1.); +#208591 = DIRECTION('',(0.707112950784,0.707100611536,0.)); +#208592 = PLANE('',#208593); +#208593 = AXIS2_PLACEMENT_3D('',#208594,#208595,#208596); +#208594 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208595 = DIRECTION('',(0.,0.,1.)); +#208596 = DIRECTION('',(1.,0.,-0.)); +#208597 = SHELL_BASED_SURFACE_MODEL('',(#208598)); +#208598 = OPEN_SHELL('',(#208599)); +#208599 = ADVANCED_FACE('',(#208600),#208786,.T.); +#208600 = FACE_BOUND('',#208601,.F.); +#208601 = EDGE_LOOP('',(#208602,#208613,#208621,#208629,#208637,#208645, + #208654,#208662,#208671,#208679,#208688,#208696,#208705,#208713, + #208721,#208729,#208738,#208746,#208754,#208763,#208771,#208780)); +#208602 = ORIENTED_EDGE('',*,*,#208603,.T.); +#208603 = EDGE_CURVE('',#208604,#208606,#208608,.T.); +#208604 = VERTEX_POINT('',#208605); +#208605 = CARTESIAN_POINT('',(112.060369,-75.985343,1.585)); +#208606 = VERTEX_POINT('',#208607); +#208607 = CARTESIAN_POINT('',(112.279225,-75.766486,1.585)); +#208608 = CIRCLE('',#208609,0.308109459502); +#208609 = AXIS2_PLACEMENT_3D('',#208610,#208611,#208612); +#208610 = CARTESIAN_POINT('',(112.35818845359,-76.06430509279,1.585)); +#208611 = DIRECTION('',(0.,0.,-1.)); +#208612 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#208613 = ORIENTED_EDGE('',*,*,#208614,.T.); +#208614 = EDGE_CURVE('',#208606,#208615,#208617,.T.); +#208615 = VERTEX_POINT('',#208616); +#208616 = CARTESIAN_POINT('',(112.511361,-75.764206,1.585)); +#208617 = LINE('',#208618,#208619); +#208618 = CARTESIAN_POINT('',(112.279225,-75.766486,1.585)); +#208619 = VECTOR('',#208620,1.); +#208620 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#208621 = ORIENTED_EDGE('',*,*,#208622,.T.); +#208622 = EDGE_CURVE('',#208615,#208623,#208625,.T.); +#208623 = VERTEX_POINT('',#208624); +#208624 = CARTESIAN_POINT('',(112.537237,-75.770433,1.585)); +#208625 = LINE('',#208626,#208627); +#208626 = CARTESIAN_POINT('',(112.511361,-75.764206,1.585)); +#208627 = VECTOR('',#208628,1.); +#208628 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#208629 = ORIENTED_EDGE('',*,*,#208630,.T.); +#208630 = EDGE_CURVE('',#208623,#208631,#208633,.T.); +#208631 = VERTEX_POINT('',#208632); +#208632 = CARTESIAN_POINT('',(112.639844,-75.825466,1.585)); +#208633 = LINE('',#208634,#208635); +#208634 = CARTESIAN_POINT('',(112.537237,-75.770433,1.585)); +#208635 = VECTOR('',#208636,1.); +#208636 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#208637 = ORIENTED_EDGE('',*,*,#208638,.T.); +#208638 = EDGE_CURVE('',#208631,#208639,#208641,.T.); +#208639 = VERTEX_POINT('',#208640); +#208640 = CARTESIAN_POINT('',(112.694878,-75.885217,1.585)); +#208641 = LINE('',#208642,#208643); +#208642 = CARTESIAN_POINT('',(112.639844,-75.825466,1.585)); +#208643 = VECTOR('',#208644,1.); +#208644 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#208645 = ORIENTED_EDGE('',*,*,#208646,.T.); +#208646 = EDGE_CURVE('',#208639,#208647,#208649,.T.); +#208647 = VERTEX_POINT('',#208648); +#208648 = CARTESIAN_POINT('',(112.688491,-76.380154,1.585)); +#208649 = CIRCLE('',#208650,0.457783772261); +#208650 = AXIS2_PLACEMENT_3D('',#208651,#208652,#208653); +#208651 = CARTESIAN_POINT('',(112.30659953493,-76.12771610455,1.585)); +#208652 = DIRECTION('',(0.,0.,-1.)); +#208653 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#208654 = ORIENTED_EDGE('',*,*,#208655,.T.); +#208655 = EDGE_CURVE('',#208647,#208656,#208658,.T.); +#208656 = VERTEX_POINT('',#208657); +#208657 = CARTESIAN_POINT('',(112.639843,-76.431676,1.585)); +#208658 = LINE('',#208659,#208660); +#208659 = CARTESIAN_POINT('',(112.688491,-76.380154,1.585)); +#208660 = VECTOR('',#208661,1.); +#208661 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#208662 = ORIENTED_EDGE('',*,*,#208663,.T.); +#208663 = EDGE_CURVE('',#208656,#208664,#208666,.T.); +#208664 = VERTEX_POINT('',#208665); +#208665 = CARTESIAN_POINT('',(112.547921,-76.339752,1.585)); +#208666 = CIRCLE('',#208667,6.499937665136E-02); +#208667 = AXIS2_PLACEMENT_3D('',#208668,#208669,#208670); +#208668 = CARTESIAN_POINT('',(112.59388218097,-76.38571381902,1.585)); +#208669 = DIRECTION('',(-0.,0.,-1.)); +#208670 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#208671 = ORIENTED_EDGE('',*,*,#208672,.T.); +#208672 = EDGE_CURVE('',#208664,#208673,#208675,.T.); +#208673 = VERTEX_POINT('',#208674); +#208674 = CARTESIAN_POINT('',(112.583319,-76.304354,1.585)); +#208675 = LINE('',#208676,#208677); +#208676 = CARTESIAN_POINT('',(112.547921,-76.339752,1.585)); +#208677 = VECTOR('',#208678,1.); +#208678 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#208679 = ORIENTED_EDGE('',*,*,#208680,.T.); +#208680 = EDGE_CURVE('',#208673,#208681,#208683,.T.); +#208681 = VERTEX_POINT('',#208682); +#208682 = CARTESIAN_POINT('',(112.583319,-75.952789,1.585)); +#208683 = CIRCLE('',#208684,0.325008683278); +#208684 = AXIS2_PLACEMENT_3D('',#208685,#208686,#208687); +#208685 = CARTESIAN_POINT('',(112.309949,-76.1285715,1.585)); +#208686 = DIRECTION('',(0.,-0.,1.)); +#208687 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#208688 = ORIENTED_EDGE('',*,*,#208689,.T.); +#208689 = EDGE_CURVE('',#208681,#208690,#208692,.T.); +#208690 = VERTEX_POINT('',#208691); +#208691 = CARTESIAN_POINT('',(112.555379,-75.924849,1.585)); +#208692 = LINE('',#208693,#208694); +#208693 = CARTESIAN_POINT('',(112.583319,-75.952789,1.585)); +#208694 = VECTOR('',#208695,1.); +#208695 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208696 = ORIENTED_EDGE('',*,*,#208697,.T.); +#208697 = EDGE_CURVE('',#208690,#208698,#208700,.T.); +#208698 = VERTEX_POINT('',#208699); +#208699 = CARTESIAN_POINT('',(112.246671,-75.924849,1.585)); +#208700 = CIRCLE('',#208701,0.277419178293); +#208701 = AXIS2_PLACEMENT_3D('',#208702,#208703,#208704); +#208702 = CARTESIAN_POINT('',(112.401025,-76.155362,1.585)); +#208703 = DIRECTION('',(0.,0.,1.)); +#208704 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#208705 = ORIENTED_EDGE('',*,*,#208706,.T.); +#208706 = EDGE_CURVE('',#208698,#208707,#208709,.T.); +#208707 = VERTEX_POINT('',#208708); +#208708 = CARTESIAN_POINT('',(112.218733,-75.952787,1.585)); +#208709 = LINE('',#208710,#208711); +#208710 = CARTESIAN_POINT('',(112.246671,-75.924849,1.585)); +#208711 = VECTOR('',#208712,1.); +#208712 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#208713 = ORIENTED_EDGE('',*,*,#208714,.T.); +#208714 = EDGE_CURVE('',#208707,#208715,#208717,.T.); +#208715 = VERTEX_POINT('',#208716); +#208716 = CARTESIAN_POINT('',(112.187454,-76.015345,1.585)); +#208717 = LINE('',#208718,#208719); +#208718 = CARTESIAN_POINT('',(112.218733,-75.952787,1.585)); +#208719 = VECTOR('',#208720,1.); +#208720 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#208721 = ORIENTED_EDGE('',*,*,#208722,.T.); +#208722 = EDGE_CURVE('',#208715,#208723,#208725,.T.); +#208723 = VERTEX_POINT('',#208724); +#208724 = CARTESIAN_POINT('',(112.187454,-76.128571,1.585)); +#208725 = LINE('',#208726,#208727); +#208726 = CARTESIAN_POINT('',(112.187454,-76.015345,1.585)); +#208727 = VECTOR('',#208728,1.); +#208728 = DIRECTION('',(0.,-1.,0.)); +#208729 = ORIENTED_EDGE('',*,*,#208730,.T.); +#208730 = EDGE_CURVE('',#208723,#208731,#208733,.T.); +#208731 = VERTEX_POINT('',#208732); +#208732 = CARTESIAN_POINT('',(112.079652,-76.177489,1.585)); +#208733 = CIRCLE('',#208734,6.500010429713E-02); +#208734 = AXIS2_PLACEMENT_3D('',#208735,#208736,#208737); +#208735 = CARTESIAN_POINT('',(112.1224538957,-76.12857058544,1.585)); +#208736 = DIRECTION('',(-0.,0.,-1.)); +#208737 = DIRECTION('',(0.99999999998,-6.377788786915E-06,-0.)); +#208738 = ORIENTED_EDGE('',*,*,#208739,.T.); +#208739 = EDGE_CURVE('',#208731,#208740,#208742,.T.); +#208740 = VERTEX_POINT('',#208741); +#208741 = CARTESIAN_POINT('',(111.844597,-75.971815,1.585)); +#208742 = LINE('',#208743,#208744); +#208743 = CARTESIAN_POINT('',(112.079652,-76.177489,1.585)); +#208744 = VECTOR('',#208745,1.); +#208745 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#208746 = ORIENTED_EDGE('',*,*,#208747,.T.); +#208747 = EDGE_CURVE('',#208740,#208748,#208750,.T.); +#208748 = VERTEX_POINT('',#208749); +#208749 = CARTESIAN_POINT('',(111.844597,-76.385714,1.585)); +#208750 = LINE('',#208751,#208752); +#208751 = CARTESIAN_POINT('',(111.844597,-75.971815,1.585)); +#208752 = VECTOR('',#208753,1.); +#208753 = DIRECTION('',(0.,-1.,0.)); +#208754 = ORIENTED_EDGE('',*,*,#208755,.T.); +#208755 = EDGE_CURVE('',#208748,#208756,#208758,.T.); +#208756 = VERTEX_POINT('',#208757); +#208757 = CARTESIAN_POINT('',(111.714597,-76.385714,1.585)); +#208758 = CIRCLE('',#208759,6.500000000091E-02); +#208759 = AXIS2_PLACEMENT_3D('',#208760,#208761,#208762); +#208760 = CARTESIAN_POINT('',(111.779597,-76.38571365513,1.585)); +#208761 = DIRECTION('',(-0.,0.,-1.)); +#208762 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#208763 = ORIENTED_EDGE('',*,*,#208764,.T.); +#208764 = EDGE_CURVE('',#208756,#208765,#208767,.T.); +#208765 = VERTEX_POINT('',#208766); +#208766 = CARTESIAN_POINT('',(111.714597,-75.828571,1.585)); +#208767 = LINE('',#208768,#208769); +#208768 = CARTESIAN_POINT('',(111.714597,-76.385714,1.585)); +#208769 = VECTOR('',#208770,1.); +#208770 = DIRECTION('',(0.,1.,0.)); +#208771 = ORIENTED_EDGE('',*,*,#208772,.T.); +#208772 = EDGE_CURVE('',#208765,#208773,#208775,.T.); +#208773 = VERTEX_POINT('',#208774); +#208774 = CARTESIAN_POINT('',(111.8224,-75.779654,1.585)); +#208775 = CIRCLE('',#208776,6.500002288386E-02); +#208776 = AXIS2_PLACEMENT_3D('',#208777,#208778,#208779); +#208777 = CARTESIAN_POINT('',(111.77959702288,-75.82857136015,1.585)); +#208778 = DIRECTION('',(0.,0.,-1.)); +#208779 = DIRECTION('',(-0.999999999985,5.540887697237E-06,0.)); +#208780 = ORIENTED_EDGE('',*,*,#208781,.T.); +#208781 = EDGE_CURVE('',#208773,#208604,#208782,.T.); +#208782 = LINE('',#208783,#208784); +#208783 = CARTESIAN_POINT('',(111.8224,-75.779654,1.585)); +#208784 = VECTOR('',#208785,1.); +#208785 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#208786 = PLANE('',#208787); +#208787 = AXIS2_PLACEMENT_3D('',#208788,#208789,#208790); +#208788 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208789 = DIRECTION('',(0.,0.,1.)); +#208790 = DIRECTION('',(1.,0.,-0.)); +#208791 = SHELL_BASED_SURFACE_MODEL('',(#208792)); +#208792 = OPEN_SHELL('',(#208793)); +#208793 = ADVANCED_FACE('',(#208794),#208980,.T.); +#208794 = FACE_BOUND('',#208795,.F.); +#208795 = EDGE_LOOP('',(#208796,#208807,#208815,#208823,#208831,#208839, + #208848,#208856,#208865,#208873,#208882,#208890,#208899,#208907, + #208915,#208923,#208932,#208940,#208948,#208957,#208965,#208974)); +#208796 = ORIENTED_EDGE('',*,*,#208797,.T.); +#208797 = EDGE_CURVE('',#208798,#208800,#208802,.T.); +#208798 = VERTEX_POINT('',#208799); +#208799 = CARTESIAN_POINT('',(155.240369,-75.985342,1.585)); +#208800 = VERTEX_POINT('',#208801); +#208801 = CARTESIAN_POINT('',(155.459225,-75.766485,1.585)); +#208802 = CIRCLE('',#208803,0.308109459502); +#208803 = AXIS2_PLACEMENT_3D('',#208804,#208805,#208806); +#208804 = CARTESIAN_POINT('',(155.53818845359,-76.06430409279,1.585)); +#208805 = DIRECTION('',(0.,0.,-1.)); +#208806 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#208807 = ORIENTED_EDGE('',*,*,#208808,.T.); +#208808 = EDGE_CURVE('',#208800,#208809,#208811,.T.); +#208809 = VERTEX_POINT('',#208810); +#208810 = CARTESIAN_POINT('',(155.691361,-75.764205,1.585)); +#208811 = LINE('',#208812,#208813); +#208812 = CARTESIAN_POINT('',(155.459225,-75.766485,1.585)); +#208813 = VECTOR('',#208814,1.); +#208814 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#208815 = ORIENTED_EDGE('',*,*,#208816,.T.); +#208816 = EDGE_CURVE('',#208809,#208817,#208819,.T.); +#208817 = VERTEX_POINT('',#208818); +#208818 = CARTESIAN_POINT('',(155.717237,-75.770432,1.585)); +#208819 = LINE('',#208820,#208821); +#208820 = CARTESIAN_POINT('',(155.691361,-75.764205,1.585)); +#208821 = VECTOR('',#208822,1.); +#208822 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#208823 = ORIENTED_EDGE('',*,*,#208824,.T.); +#208824 = EDGE_CURVE('',#208817,#208825,#208827,.T.); +#208825 = VERTEX_POINT('',#208826); +#208826 = CARTESIAN_POINT('',(155.819844,-75.825465,1.585)); +#208827 = LINE('',#208828,#208829); +#208828 = CARTESIAN_POINT('',(155.717237,-75.770432,1.585)); +#208829 = VECTOR('',#208830,1.); +#208830 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#208831 = ORIENTED_EDGE('',*,*,#208832,.T.); +#208832 = EDGE_CURVE('',#208825,#208833,#208835,.T.); +#208833 = VERTEX_POINT('',#208834); +#208834 = CARTESIAN_POINT('',(155.874878,-75.885216,1.585)); +#208835 = LINE('',#208836,#208837); +#208836 = CARTESIAN_POINT('',(155.819844,-75.825465,1.585)); +#208837 = VECTOR('',#208838,1.); +#208838 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#208839 = ORIENTED_EDGE('',*,*,#208840,.T.); +#208840 = EDGE_CURVE('',#208833,#208841,#208843,.T.); +#208841 = VERTEX_POINT('',#208842); +#208842 = CARTESIAN_POINT('',(155.868491,-76.380153,1.585)); +#208843 = CIRCLE('',#208844,0.457783772261); +#208844 = AXIS2_PLACEMENT_3D('',#208845,#208846,#208847); +#208845 = CARTESIAN_POINT('',(155.48659953493,-76.12771510455,1.585)); +#208846 = DIRECTION('',(0.,0.,-1.)); +#208847 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#208848 = ORIENTED_EDGE('',*,*,#208849,.T.); +#208849 = EDGE_CURVE('',#208841,#208850,#208852,.T.); +#208850 = VERTEX_POINT('',#208851); +#208851 = CARTESIAN_POINT('',(155.819843,-76.431675,1.585)); +#208852 = LINE('',#208853,#208854); +#208853 = CARTESIAN_POINT('',(155.868491,-76.380153,1.585)); +#208854 = VECTOR('',#208855,1.); +#208855 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#208856 = ORIENTED_EDGE('',*,*,#208857,.T.); +#208857 = EDGE_CURVE('',#208850,#208858,#208860,.T.); +#208858 = VERTEX_POINT('',#208859); +#208859 = CARTESIAN_POINT('',(155.727921,-76.339751,1.585)); +#208860 = CIRCLE('',#208861,6.499937665135E-02); +#208861 = AXIS2_PLACEMENT_3D('',#208862,#208863,#208864); +#208862 = CARTESIAN_POINT('',(155.77388218097,-76.38571281902,1.585)); +#208863 = DIRECTION('',(-0.,0.,-1.)); +#208864 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#208865 = ORIENTED_EDGE('',*,*,#208866,.T.); +#208866 = EDGE_CURVE('',#208858,#208867,#208869,.T.); +#208867 = VERTEX_POINT('',#208868); +#208868 = CARTESIAN_POINT('',(155.763319,-76.304353,1.585)); +#208869 = LINE('',#208870,#208871); +#208870 = CARTESIAN_POINT('',(155.727921,-76.339751,1.585)); +#208871 = VECTOR('',#208872,1.); +#208872 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#208873 = ORIENTED_EDGE('',*,*,#208874,.T.); +#208874 = EDGE_CURVE('',#208867,#208875,#208877,.T.); +#208875 = VERTEX_POINT('',#208876); +#208876 = CARTESIAN_POINT('',(155.763319,-75.952788,1.585)); +#208877 = CIRCLE('',#208878,0.325008683278); +#208878 = AXIS2_PLACEMENT_3D('',#208879,#208880,#208881); +#208879 = CARTESIAN_POINT('',(155.489949,-76.1285705,1.585)); +#208880 = DIRECTION('',(0.,-0.,1.)); +#208881 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#208882 = ORIENTED_EDGE('',*,*,#208883,.T.); +#208883 = EDGE_CURVE('',#208875,#208884,#208886,.T.); +#208884 = VERTEX_POINT('',#208885); +#208885 = CARTESIAN_POINT('',(155.735379,-75.924848,1.585)); +#208886 = LINE('',#208887,#208888); +#208887 = CARTESIAN_POINT('',(155.763319,-75.952788,1.585)); +#208888 = VECTOR('',#208889,1.); +#208889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208890 = ORIENTED_EDGE('',*,*,#208891,.T.); +#208891 = EDGE_CURVE('',#208884,#208892,#208894,.T.); +#208892 = VERTEX_POINT('',#208893); +#208893 = CARTESIAN_POINT('',(155.426671,-75.924848,1.585)); +#208894 = CIRCLE('',#208895,0.277419178293); +#208895 = AXIS2_PLACEMENT_3D('',#208896,#208897,#208898); +#208896 = CARTESIAN_POINT('',(155.581025,-76.155361,1.585)); +#208897 = DIRECTION('',(0.,0.,1.)); +#208898 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#208899 = ORIENTED_EDGE('',*,*,#208900,.T.); +#208900 = EDGE_CURVE('',#208892,#208901,#208903,.T.); +#208901 = VERTEX_POINT('',#208902); +#208902 = CARTESIAN_POINT('',(155.398733,-75.952786,1.585)); +#208903 = LINE('',#208904,#208905); +#208904 = CARTESIAN_POINT('',(155.426671,-75.924848,1.585)); +#208905 = VECTOR('',#208906,1.); +#208906 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#208907 = ORIENTED_EDGE('',*,*,#208908,.T.); +#208908 = EDGE_CURVE('',#208901,#208909,#208911,.T.); +#208909 = VERTEX_POINT('',#208910); +#208910 = CARTESIAN_POINT('',(155.367454,-76.015344,1.585)); +#208911 = LINE('',#208912,#208913); +#208912 = CARTESIAN_POINT('',(155.398733,-75.952786,1.585)); +#208913 = VECTOR('',#208914,1.); +#208914 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#208915 = ORIENTED_EDGE('',*,*,#208916,.T.); +#208916 = EDGE_CURVE('',#208909,#208917,#208919,.T.); +#208917 = VERTEX_POINT('',#208918); +#208918 = CARTESIAN_POINT('',(155.367454,-76.12857,1.585)); +#208919 = LINE('',#208920,#208921); +#208920 = CARTESIAN_POINT('',(155.367454,-76.015344,1.585)); +#208921 = VECTOR('',#208922,1.); +#208922 = DIRECTION('',(0.,-1.,0.)); +#208923 = ORIENTED_EDGE('',*,*,#208924,.T.); +#208924 = EDGE_CURVE('',#208917,#208925,#208927,.T.); +#208925 = VERTEX_POINT('',#208926); +#208926 = CARTESIAN_POINT('',(155.259652,-76.177488,1.585)); +#208927 = CIRCLE('',#208928,6.500010429715E-02); +#208928 = AXIS2_PLACEMENT_3D('',#208929,#208930,#208931); +#208929 = CARTESIAN_POINT('',(155.3024538957,-76.12856958544,1.585)); +#208930 = DIRECTION('',(-0.,0.,-1.)); +#208931 = DIRECTION('',(0.99999999998,-6.377789442798E-06,-0.)); +#208932 = ORIENTED_EDGE('',*,*,#208933,.T.); +#208933 = EDGE_CURVE('',#208925,#208934,#208936,.T.); +#208934 = VERTEX_POINT('',#208935); +#208935 = CARTESIAN_POINT('',(155.024597,-75.971814,1.585)); +#208936 = LINE('',#208937,#208938); +#208937 = CARTESIAN_POINT('',(155.259652,-76.177488,1.585)); +#208938 = VECTOR('',#208939,1.); +#208939 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#208940 = ORIENTED_EDGE('',*,*,#208941,.T.); +#208941 = EDGE_CURVE('',#208934,#208942,#208944,.T.); +#208942 = VERTEX_POINT('',#208943); +#208943 = CARTESIAN_POINT('',(155.024597,-76.385713,1.585)); +#208944 = LINE('',#208945,#208946); +#208945 = CARTESIAN_POINT('',(155.024597,-75.971814,1.585)); +#208946 = VECTOR('',#208947,1.); +#208947 = DIRECTION('',(0.,-1.,0.)); +#208948 = ORIENTED_EDGE('',*,*,#208949,.T.); +#208949 = EDGE_CURVE('',#208942,#208950,#208952,.T.); +#208950 = VERTEX_POINT('',#208951); +#208951 = CARTESIAN_POINT('',(154.894597,-76.385713,1.585)); +#208952 = CIRCLE('',#208953,6.500000000091E-02); +#208953 = AXIS2_PLACEMENT_3D('',#208954,#208955,#208956); +#208954 = CARTESIAN_POINT('',(154.959597,-76.38571265513,1.585)); +#208955 = DIRECTION('',(-0.,0.,-1.)); +#208956 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#208957 = ORIENTED_EDGE('',*,*,#208958,.T.); +#208958 = EDGE_CURVE('',#208950,#208959,#208961,.T.); +#208959 = VERTEX_POINT('',#208960); +#208960 = CARTESIAN_POINT('',(154.894597,-75.82857,1.585)); +#208961 = LINE('',#208962,#208963); +#208962 = CARTESIAN_POINT('',(154.894597,-76.385713,1.585)); +#208963 = VECTOR('',#208964,1.); +#208964 = DIRECTION('',(0.,1.,0.)); +#208965 = ORIENTED_EDGE('',*,*,#208966,.T.); +#208966 = EDGE_CURVE('',#208959,#208967,#208969,.T.); +#208967 = VERTEX_POINT('',#208968); +#208968 = CARTESIAN_POINT('',(155.0024,-75.779653,1.585)); +#208969 = CIRCLE('',#208970,6.500002288384E-02); +#208970 = AXIS2_PLACEMENT_3D('',#208971,#208972,#208973); +#208971 = CARTESIAN_POINT('',(154.95959702288,-75.82857036015,1.585)); +#208972 = DIRECTION('',(0.,0.,-1.)); +#208973 = DIRECTION('',(-0.999999999985,5.54088725998E-06,0.)); +#208974 = ORIENTED_EDGE('',*,*,#208975,.T.); +#208975 = EDGE_CURVE('',#208967,#208798,#208976,.T.); +#208976 = LINE('',#208977,#208978); +#208977 = CARTESIAN_POINT('',(155.0024,-75.779653,1.585)); +#208978 = VECTOR('',#208979,1.); +#208979 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#208980 = PLANE('',#208981); +#208981 = AXIS2_PLACEMENT_3D('',#208982,#208983,#208984); +#208982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208983 = DIRECTION('',(0.,0.,1.)); +#208984 = DIRECTION('',(1.,0.,-0.)); +#208985 = SHELL_BASED_SURFACE_MODEL('',(#208986)); +#208986 = OPEN_SHELL('',(#208987)); +#208987 = ADVANCED_FACE('',(#208988),#209090,.T.); +#208988 = FACE_BOUND('',#208989,.F.); +#208989 = EDGE_LOOP('',(#208990,#209000,#209009,#209017,#209025,#209034, + #209042,#209050,#209059,#209067,#209075,#209084)); +#208990 = ORIENTED_EDGE('',*,*,#208991,.T.); +#208991 = EDGE_CURVE('',#208992,#208994,#208996,.T.); +#208992 = VERTEX_POINT('',#208993); +#208993 = CARTESIAN_POINT('',(122.359596,-75.993307,1.585)); +#208994 = VERTEX_POINT('',#208995); +#208995 = CARTESIAN_POINT('',(122.773541,-75.717345,1.585)); +#208996 = LINE('',#208997,#208998); +#208997 = CARTESIAN_POINT('',(122.359596,-75.993307,1.585)); +#208998 = VECTOR('',#208999,1.); +#208999 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#209000 = ORIENTED_EDGE('',*,*,#209001,.T.); +#209001 = EDGE_CURVE('',#208994,#209002,#209004,.T.); +#209002 = VERTEX_POINT('',#209003); +#209003 = CARTESIAN_POINT('',(122.845652,-75.825511,1.585)); +#209004 = CIRCLE('',#209005,6.499976899536E-02); +#209005 = AXIS2_PLACEMENT_3D('',#209006,#209007,#209008); +#209006 = CARTESIAN_POINT('',(122.80959612917,-75.77142824722,1.585)); +#209007 = DIRECTION('',(0.,0.,-1.)); +#209008 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#209009 = ORIENTED_EDGE('',*,*,#209010,.T.); +#209010 = EDGE_CURVE('',#209002,#209011,#209013,.T.); +#209011 = VERTEX_POINT('',#209012); +#209012 = CARTESIAN_POINT('',(122.476776,-76.071428,1.585)); +#209013 = LINE('',#209014,#209015); +#209014 = CARTESIAN_POINT('',(122.845652,-75.825511,1.585)); +#209015 = VECTOR('',#209016,1.); +#209016 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#209017 = ORIENTED_EDGE('',*,*,#209018,.T.); +#209018 = EDGE_CURVE('',#209011,#209019,#209021,.T.); +#209019 = VERTEX_POINT('',#209020); +#209020 = CARTESIAN_POINT('',(122.845652,-76.317345,1.585)); +#209021 = LINE('',#209022,#209023); +#209022 = CARTESIAN_POINT('',(122.476776,-76.071428,1.585)); +#209023 = VECTOR('',#209024,1.); +#209024 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#209025 = ORIENTED_EDGE('',*,*,#209026,.T.); +#209026 = EDGE_CURVE('',#209019,#209027,#209029,.T.); +#209027 = VERTEX_POINT('',#209028); +#209028 = CARTESIAN_POINT('',(122.773541,-76.425511,1.585)); +#209029 = CIRCLE('',#209030,6.49997689954E-02); +#209030 = AXIS2_PLACEMENT_3D('',#209031,#209032,#209033); +#209031 = CARTESIAN_POINT('',(122.80959687747,-76.37142825164,1.585)); +#209032 = DIRECTION('',(0.,0.,-1.)); +#209033 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#209034 = ORIENTED_EDGE('',*,*,#209035,.T.); +#209035 = EDGE_CURVE('',#209027,#209036,#209038,.T.); +#209036 = VERTEX_POINT('',#209037); +#209037 = CARTESIAN_POINT('',(122.359596,-76.149548,1.585)); +#209038 = LINE('',#209039,#209040); +#209039 = CARTESIAN_POINT('',(122.773541,-76.425511,1.585)); +#209040 = VECTOR('',#209041,1.); +#209041 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#209042 = ORIENTED_EDGE('',*,*,#209043,.T.); +#209043 = EDGE_CURVE('',#209036,#209044,#209046,.T.); +#209044 = VERTEX_POINT('',#209045); +#209045 = CARTESIAN_POINT('',(121.945653,-76.425511,1.585)); +#209046 = LINE('',#209047,#209048); +#209047 = CARTESIAN_POINT('',(122.359596,-76.149548,1.585)); +#209048 = VECTOR('',#209049,1.); +#209049 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#209050 = ORIENTED_EDGE('',*,*,#209051,.T.); +#209051 = EDGE_CURVE('',#209044,#209052,#209054,.T.); +#209052 = VERTEX_POINT('',#209053); +#209053 = CARTESIAN_POINT('',(121.873541,-76.317345,1.585)); +#209054 = CIRCLE('',#209055,6.500004634766E-02); +#209055 = AXIS2_PLACEMENT_3D('',#209056,#209057,#209058); +#209056 = CARTESIAN_POINT('',(121.90959737004,-76.3714277533,1.585)); +#209057 = DIRECTION('',(0.,0.,-1.)); +#209058 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#209059 = ORIENTED_EDGE('',*,*,#209060,.T.); +#209060 = EDGE_CURVE('',#209052,#209061,#209063,.T.); +#209061 = VERTEX_POINT('',#209062); +#209062 = CARTESIAN_POINT('',(122.242416,-76.071428,1.585)); +#209063 = LINE('',#209064,#209065); +#209064 = CARTESIAN_POINT('',(121.873541,-76.317345,1.585)); +#209065 = VECTOR('',#209066,1.); +#209066 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#209067 = ORIENTED_EDGE('',*,*,#209068,.T.); +#209068 = EDGE_CURVE('',#209061,#209069,#209071,.T.); +#209069 = VERTEX_POINT('',#209070); +#209070 = CARTESIAN_POINT('',(121.873541,-75.825511,1.585)); +#209071 = LINE('',#209072,#209073); +#209072 = CARTESIAN_POINT('',(122.242416,-76.071428,1.585)); +#209073 = VECTOR('',#209074,1.); +#209074 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#209075 = ORIENTED_EDGE('',*,*,#209076,.T.); +#209076 = EDGE_CURVE('',#209069,#209077,#209079,.T.); +#209077 = VERTEX_POINT('',#209078); +#209078 = CARTESIAN_POINT('',(121.945653,-75.717345,1.585)); +#209079 = CIRCLE('',#209080,6.500004634723E-02); +#209080 = AXIS2_PLACEMENT_3D('',#209081,#209082,#209083); +#209081 = CARTESIAN_POINT('',(121.90959731405,-75.77142820937,1.585)); +#209082 = DIRECTION('',(0.,0.,-1.)); +#209083 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#209084 = ORIENTED_EDGE('',*,*,#209085,.T.); +#209085 = EDGE_CURVE('',#209077,#208992,#209086,.T.); +#209086 = LINE('',#209087,#209088); +#209087 = CARTESIAN_POINT('',(121.945653,-75.717345,1.585)); +#209088 = VECTOR('',#209089,1.); +#209089 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#209090 = PLANE('',#209091); +#209091 = AXIS2_PLACEMENT_3D('',#209092,#209093,#209094); +#209092 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209093 = DIRECTION('',(0.,0.,1.)); +#209094 = DIRECTION('',(1.,0.,-0.)); +#209095 = SHELL_BASED_SURFACE_MODEL('',(#209096)); +#209096 = OPEN_SHELL('',(#209097)); +#209097 = ADVANCED_FACE('',(#209098),#209225,.T.); +#209098 = FACE_BOUND('',#209099,.F.); +#209099 = EDGE_LOOP('',(#209100,#209111,#209119,#209128,#209136,#209144, + #209153,#209161,#209170,#209178,#209186,#209194,#209203,#209211, + #209219)); +#209100 = ORIENTED_EDGE('',*,*,#209101,.T.); +#209101 = EDGE_CURVE('',#209102,#209104,#209106,.T.); +#209102 = VERTEX_POINT('',#209103); +#209103 = CARTESIAN_POINT('',(107.539545,-75.803697,1.585)); +#209104 = VERTEX_POINT('',#209105); +#209105 = CARTESIAN_POINT('',(107.664597,-75.828571,1.585)); +#209106 = CIRCLE('',#209107,6.499988811647E-02); +#209107 = AXIS2_PLACEMENT_3D('',#209108,#209109,#209110); +#209108 = CARTESIAN_POINT('',(107.59959711188,-75.8285712701,1.585)); +#209109 = DIRECTION('',(0.,0.,-1.)); +#209110 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#209111 = ORIENTED_EDGE('',*,*,#209112,.T.); +#209112 = EDGE_CURVE('',#209104,#209113,#209115,.T.); +#209113 = VERTEX_POINT('',#209114); +#209114 = CARTESIAN_POINT('',(107.664597,-76.342857,1.585)); +#209115 = LINE('',#209116,#209117); +#209116 = CARTESIAN_POINT('',(107.664597,-75.828571,1.585)); +#209117 = VECTOR('',#209118,1.); +#209118 = DIRECTION('',(0.,-1.,0.)); +#209119 = ORIENTED_EDGE('',*,*,#209120,.T.); +#209120 = EDGE_CURVE('',#209113,#209121,#209123,.T.); +#209121 = VERTEX_POINT('',#209122); +#209122 = CARTESIAN_POINT('',(107.534597,-76.342857,1.585)); +#209123 = CIRCLE('',#209124,6.500000000091E-02); +#209124 = AXIS2_PLACEMENT_3D('',#209125,#209126,#209127); +#209125 = CARTESIAN_POINT('',(107.599597,-76.34285665513,1.585)); +#209126 = DIRECTION('',(-0.,0.,-1.)); +#209127 = DIRECTION('',(0.999999999986,-5.305658025668E-06,-0.)); +#209128 = ORIENTED_EDGE('',*,*,#209129,.T.); +#209129 = EDGE_CURVE('',#209121,#209130,#209132,.T.); +#209130 = VERTEX_POINT('',#209131); +#209131 = CARTESIAN_POINT('',(107.534597,-76.150714,1.585)); +#209132 = LINE('',#209133,#209134); +#209133 = CARTESIAN_POINT('',(107.534597,-76.342857,1.585)); +#209134 = VECTOR('',#209135,1.); +#209135 = DIRECTION('',(0.,1.,0.)); +#209136 = ORIENTED_EDGE('',*,*,#209137,.T.); +#209137 = EDGE_CURVE('',#209130,#209138,#209140,.T.); +#209138 = VERTEX_POINT('',#209139); +#209139 = CARTESIAN_POINT('',(106.899377,-76.150714,1.585)); +#209140 = LINE('',#209141,#209142); +#209141 = CARTESIAN_POINT('',(107.534597,-76.150714,1.585)); +#209142 = VECTOR('',#209143,1.); +#209143 = DIRECTION('',(-1.,0.,0.)); +#209144 = ORIENTED_EDGE('',*,*,#209145,.T.); +#209145 = EDGE_CURVE('',#209138,#209146,#209148,.T.); +#209146 = VERTEX_POINT('',#209147); +#209147 = CARTESIAN_POINT('',(107.021576,-76.338249,1.585)); +#209148 = CIRCLE('',#209149,0.344106608647); +#209149 = AXIS2_PLACEMENT_3D('',#209150,#209151,#209152); +#209150 = CARTESIAN_POINT('',(106.68784890229,-76.42212737843,1.585)); +#209151 = DIRECTION('',(0.,0.,-1.)); +#209152 = DIRECTION('',(0.614716754616,0.788747939201,0.)); +#209153 = ORIENTED_EDGE('',*,*,#209154,.T.); +#209154 = EDGE_CURVE('',#209146,#209155,#209157,.T.); +#209155 = VERTEX_POINT('',#209156); +#209156 = CARTESIAN_POINT('',(107.005845,-76.385445,1.585)); +#209157 = LINE('',#209158,#209159); +#209158 = CARTESIAN_POINT('',(107.021576,-76.338249,1.585)); +#209159 = VECTOR('',#209160,1.); +#209160 = DIRECTION('',(-0.316209675011,-0.948689328194,0.)); +#209161 = ORIENTED_EDGE('',*,*,#209162,.T.); +#209162 = EDGE_CURVE('',#209155,#209163,#209165,.T.); +#209163 = VERTEX_POINT('',#209164); +#209164 = CARTESIAN_POINT('',(106.898603,-76.371927,1.585)); +#209165 = CIRCLE('',#209166,6.500070728727E-02); +#209166 = AXIS2_PLACEMENT_3D('',#209167,#209168,#209169); +#209167 = CARTESIAN_POINT('',(106.9567404363,-76.3428558726,1.585)); +#209168 = DIRECTION('',(-0.,0.,-1.)); +#209169 = DIRECTION('',(0.755446605822,-0.655210214932,-0.)); +#209170 = ORIENTED_EDGE('',*,*,#209171,.T.); +#209171 = EDGE_CURVE('',#209163,#209172,#209174,.T.); +#209172 = VERTEX_POINT('',#209173); +#209173 = CARTESIAN_POINT('',(106.860463,-76.295647,1.585)); +#209174 = LINE('',#209175,#209176); +#209175 = CARTESIAN_POINT('',(106.898603,-76.371927,1.585)); +#209176 = VECTOR('',#209177,1.); +#209177 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#209178 = ORIENTED_EDGE('',*,*,#209179,.T.); +#209179 = EDGE_CURVE('',#209172,#209180,#209182,.T.); +#209180 = VERTEX_POINT('',#209181); +#209181 = CARTESIAN_POINT('',(106.786756,-76.22194,1.585)); +#209182 = LINE('',#209183,#209184); +#209183 = CARTESIAN_POINT('',(106.860463,-76.295647,1.585)); +#209184 = VECTOR('',#209185,1.); +#209185 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209186 = ORIENTED_EDGE('',*,*,#209187,.T.); +#209187 = EDGE_CURVE('',#209180,#209188,#209190,.T.); +#209188 = VERTEX_POINT('',#209189); +#209189 = CARTESIAN_POINT('',(106.663541,-76.139797,1.585)); +#209190 = LINE('',#209191,#209192); +#209191 = CARTESIAN_POINT('',(106.786756,-76.22194,1.585)); +#209192 = VECTOR('',#209193,1.); +#209193 = DIRECTION('',(-0.832051333235,0.554698637876,0.)); +#209194 = ORIENTED_EDGE('',*,*,#209195,.T.); +#209195 = EDGE_CURVE('',#209188,#209196,#209198,.T.); +#209196 = VERTEX_POINT('',#209197); +#209197 = CARTESIAN_POINT('',(106.699597,-76.020714,1.585)); +#209198 = CIRCLE('',#209199,6.500015790363E-02); +#209199 = AXIS2_PLACEMENT_3D('',#209200,#209201,#209202); +#209200 = CARTESIAN_POINT('',(106.69959743795,-76.0857141579,1.585)); +#209201 = DIRECTION('',(0.,0.,-1.)); +#209202 = DIRECTION('',(-0.554713082544,-0.832041703314,-0.)); +#209203 = ORIENTED_EDGE('',*,*,#209204,.T.); +#209204 = EDGE_CURVE('',#209196,#209205,#209207,.T.); +#209205 = VERTEX_POINT('',#209206); +#209206 = CARTESIAN_POINT('',(107.534597,-76.020714,1.585)); +#209207 = LINE('',#209208,#209209); +#209208 = CARTESIAN_POINT('',(106.699597,-76.020714,1.585)); +#209209 = VECTOR('',#209210,1.); +#209210 = DIRECTION('',(1.,0.,0.)); +#209211 = ORIENTED_EDGE('',*,*,#209212,.T.); +#209212 = EDGE_CURVE('',#209205,#209213,#209215,.T.); +#209213 = VERTEX_POINT('',#209214); +#209214 = CARTESIAN_POINT('',(107.534597,-75.828571,1.585)); +#209215 = LINE('',#209216,#209217); +#209216 = CARTESIAN_POINT('',(107.534597,-76.020714,1.585)); +#209217 = VECTOR('',#209218,1.); +#209218 = DIRECTION('',(0.,1.,0.)); +#209219 = ORIENTED_EDGE('',*,*,#209220,.T.); +#209220 = EDGE_CURVE('',#209213,#209102,#209221,.T.); +#209221 = LINE('',#209222,#209223); +#209222 = CARTESIAN_POINT('',(107.534597,-75.828571,1.585)); +#209223 = VECTOR('',#209224,1.); +#209224 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#209225 = PLANE('',#209226); +#209226 = AXIS2_PLACEMENT_3D('',#209227,#209228,#209229); +#209227 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209228 = DIRECTION('',(0.,0.,1.)); +#209229 = DIRECTION('',(1.,0.,-0.)); +#209230 = SHELL_BASED_SURFACE_MODEL('',(#209231)); +#209231 = OPEN_SHELL('',(#209232)); +#209232 = ADVANCED_FACE('',(#209233),#209368,.T.); +#209233 = FACE_BOUND('',#209234,.F.); +#209234 = EDGE_LOOP('',(#209235,#209246,#209254,#209262,#209271,#209279, + #209287,#209296,#209304,#209313,#209321,#209329,#209337,#209346, + #209354,#209362)); +#209235 = ORIENTED_EDGE('',*,*,#209236,.T.); +#209236 = EDGE_CURVE('',#209237,#209239,#209241,.T.); +#209237 = VERTEX_POINT('',#209238); +#209238 = CARTESIAN_POINT('',(114.859545,-75.76084,1.585)); +#209239 = VERTEX_POINT('',#209240); +#209240 = CARTESIAN_POINT('',(114.984597,-75.785714,1.585)); +#209241 = CIRCLE('',#209242,6.499988811647E-02); +#209242 = AXIS2_PLACEMENT_3D('',#209243,#209244,#209245); +#209243 = CARTESIAN_POINT('',(114.91959711188,-75.7857142701,1.585)); +#209244 = DIRECTION('',(0.,0.,-1.)); +#209245 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#209246 = ORIENTED_EDGE('',*,*,#209247,.T.); +#209247 = EDGE_CURVE('',#209239,#209248,#209250,.T.); +#209248 = VERTEX_POINT('',#209249); +#209249 = CARTESIAN_POINT('',(114.984597,-75.849286,1.585)); +#209250 = LINE('',#209251,#209252); +#209251 = CARTESIAN_POINT('',(114.984597,-75.785714,1.585)); +#209252 = VECTOR('',#209253,1.); +#209253 = DIRECTION('',(0.,-1.,0.)); +#209254 = ORIENTED_EDGE('',*,*,#209255,.T.); +#209255 = EDGE_CURVE('',#209248,#209256,#209258,.T.); +#209256 = VERTEX_POINT('',#209257); +#209257 = CARTESIAN_POINT('',(115.219597,-75.849286,1.585)); +#209258 = LINE('',#209259,#209260); +#209259 = CARTESIAN_POINT('',(114.984597,-75.849286,1.585)); +#209260 = VECTOR('',#209261,1.); +#209261 = DIRECTION('',(1.,0.,0.)); +#209262 = ORIENTED_EDGE('',*,*,#209263,.T.); +#209263 = EDGE_CURVE('',#209256,#209264,#209266,.T.); +#209264 = VERTEX_POINT('',#209265); +#209265 = CARTESIAN_POINT('',(115.219597,-75.979286,1.585)); +#209266 = CIRCLE('',#209267,6.500000000091E-02); +#209267 = AXIS2_PLACEMENT_3D('',#209268,#209269,#209270); +#209268 = CARTESIAN_POINT('',(115.21959665513,-75.914286,1.585)); +#209269 = DIRECTION('',(0.,0.,-1.)); +#209270 = DIRECTION('',(5.30565780704E-06,0.999999999986,0.)); +#209271 = ORIENTED_EDGE('',*,*,#209272,.T.); +#209272 = EDGE_CURVE('',#209264,#209273,#209275,.T.); +#209273 = VERTEX_POINT('',#209274); +#209274 = CARTESIAN_POINT('',(114.984597,-75.979286,1.585)); +#209275 = LINE('',#209276,#209277); +#209276 = CARTESIAN_POINT('',(115.219597,-75.979286,1.585)); +#209277 = VECTOR('',#209278,1.); +#209278 = DIRECTION('',(-1.,0.,0.)); +#209279 = ORIENTED_EDGE('',*,*,#209280,.T.); +#209280 = EDGE_CURVE('',#209273,#209281,#209283,.T.); +#209281 = VERTEX_POINT('',#209282); +#209282 = CARTESIAN_POINT('',(114.984597,-76.342857,1.585)); +#209283 = LINE('',#209284,#209285); +#209284 = CARTESIAN_POINT('',(114.984597,-75.979286,1.585)); +#209285 = VECTOR('',#209286,1.); +#209286 = DIRECTION('',(0.,-1.,0.)); +#209287 = ORIENTED_EDGE('',*,*,#209288,.T.); +#209288 = EDGE_CURVE('',#209281,#209289,#209291,.T.); +#209289 = VERTEX_POINT('',#209290); +#209290 = CARTESIAN_POINT('',(114.899042,-76.404521,1.585)); +#209291 = CIRCLE('',#209292,6.499920680886E-02); +#209292 = AXIS2_PLACEMENT_3D('',#209293,#209294,#209295); +#209293 = CARTESIAN_POINT('',(114.91959779319,-76.3428577512,1.585)); +#209294 = DIRECTION('',(0.,0.,-1.)); +#209295 = DIRECTION('',(0.999999999933,1.15571496736E-05,0.)); +#209296 = ORIENTED_EDGE('',*,*,#209297,.T.); +#209297 = EDGE_CURVE('',#209289,#209298,#209300,.T.); +#209298 = VERTEX_POINT('',#209299); +#209299 = CARTESIAN_POINT('',(114.256185,-76.190235,1.585)); +#209300 = LINE('',#209301,#209302); +#209301 = CARTESIAN_POINT('',(114.899042,-76.404521,1.585)); +#209302 = VECTOR('',#209303,1.); +#209303 = DIRECTION('',(-0.948683150477,0.316228208736,0.)); +#209304 = ORIENTED_EDGE('',*,*,#209305,.T.); +#209305 = EDGE_CURVE('',#209298,#209306,#209308,.T.); +#209306 = VERTEX_POINT('',#209307); +#209307 = CARTESIAN_POINT('',(114.297295,-76.066907,1.585)); +#209308 = CIRCLE('',#209309,6.499966862258E-02); +#209309 = AXIS2_PLACEMENT_3D('',#209310,#209311,#209312); +#209310 = CARTESIAN_POINT('',(114.27674020202,-76.12857106734,1.585)); +#209311 = DIRECTION('',(0.,0.,-1.)); +#209312 = DIRECTION('',(-0.316235489453,-0.948680723537,-0.)); +#209313 = ORIENTED_EDGE('',*,*,#209314,.T.); +#209314 = EDGE_CURVE('',#209306,#209315,#209317,.T.); +#209315 = VERTEX_POINT('',#209316); +#209316 = CARTESIAN_POINT('',(114.854597,-76.252674,1.585)); +#209317 = LINE('',#209318,#209319); +#209318 = CARTESIAN_POINT('',(114.297295,-76.066907,1.585)); +#209319 = VECTOR('',#209320,1.); +#209320 = DIRECTION('',(0.948683468278,-0.316227255333,0.)); +#209321 = ORIENTED_EDGE('',*,*,#209322,.T.); +#209322 = EDGE_CURVE('',#209315,#209323,#209325,.T.); +#209323 = VERTEX_POINT('',#209324); +#209324 = CARTESIAN_POINT('',(114.854597,-75.979286,1.585)); +#209325 = LINE('',#209326,#209327); +#209326 = CARTESIAN_POINT('',(114.854597,-76.252674,1.585)); +#209327 = VECTOR('',#209328,1.); +#209328 = DIRECTION('',(0.,1.,0.)); +#209329 = ORIENTED_EDGE('',*,*,#209330,.T.); +#209330 = EDGE_CURVE('',#209323,#209331,#209333,.T.); +#209331 = VERTEX_POINT('',#209332); +#209332 = CARTESIAN_POINT('',(114.619597,-75.979286,1.585)); +#209333 = LINE('',#209334,#209335); +#209334 = CARTESIAN_POINT('',(114.854597,-75.979286,1.585)); +#209335 = VECTOR('',#209336,1.); +#209336 = DIRECTION('',(-1.,0.,0.)); +#209337 = ORIENTED_EDGE('',*,*,#209338,.T.); +#209338 = EDGE_CURVE('',#209331,#209339,#209341,.T.); +#209339 = VERTEX_POINT('',#209340); +#209340 = CARTESIAN_POINT('',(114.619597,-75.849286,1.585)); +#209341 = CIRCLE('',#209342,6.500000000091E-02); +#209342 = AXIS2_PLACEMENT_3D('',#209343,#209344,#209345); +#209343 = CARTESIAN_POINT('',(114.61959734486,-75.914286,1.585)); +#209344 = DIRECTION('',(0.,0.,-1.)); +#209345 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#209346 = ORIENTED_EDGE('',*,*,#209347,.T.); +#209347 = EDGE_CURVE('',#209339,#209348,#209350,.T.); +#209348 = VERTEX_POINT('',#209349); +#209349 = CARTESIAN_POINT('',(114.854597,-75.849286,1.585)); +#209350 = LINE('',#209351,#209352); +#209351 = CARTESIAN_POINT('',(114.619597,-75.849286,1.585)); +#209352 = VECTOR('',#209353,1.); +#209353 = DIRECTION('',(1.,0.,0.)); +#209354 = ORIENTED_EDGE('',*,*,#209355,.T.); +#209355 = EDGE_CURVE('',#209348,#209356,#209358,.T.); +#209356 = VERTEX_POINT('',#209357); +#209357 = CARTESIAN_POINT('',(114.854597,-75.785714,1.585)); +#209358 = LINE('',#209359,#209360); +#209359 = CARTESIAN_POINT('',(114.854597,-75.849286,1.585)); +#209360 = VECTOR('',#209361,1.); +#209361 = DIRECTION('',(0.,1.,0.)); +#209362 = ORIENTED_EDGE('',*,*,#209363,.T.); +#209363 = EDGE_CURVE('',#209356,#209237,#209364,.T.); +#209364 = LINE('',#209365,#209366); +#209365 = CARTESIAN_POINT('',(114.854597,-75.785714,1.585)); +#209366 = VECTOR('',#209367,1.); +#209367 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#209368 = PLANE('',#209369); +#209369 = AXIS2_PLACEMENT_3D('',#209370,#209371,#209372); +#209370 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209371 = DIRECTION('',(0.,0.,1.)); +#209372 = DIRECTION('',(1.,0.,-0.)); +#209373 = SHELL_BASED_SURFACE_MODEL('',(#209374)); +#209374 = OPEN_SHELL('',(#209375)); +#209375 = ADVANCED_FACE('',(#209376),#209462,.T.); +#209376 = FACE_BOUND('',#209377,.F.); +#209377 = EDGE_LOOP('',(#209378,#209389,#209397,#209406,#209414,#209422, + #209431,#209439,#209448,#209456)); +#209378 = ORIENTED_EDGE('',*,*,#209379,.T.); +#209379 = EDGE_CURVE('',#209380,#209382,#209384,.T.); +#209380 = VERTEX_POINT('',#209381); +#209381 = CARTESIAN_POINT('',(116.959597,-75.879285,1.585)); +#209382 = VERTEX_POINT('',#209383); +#209383 = CARTESIAN_POINT('',(116.959597,-75.749285,1.585)); +#209384 = CIRCLE('',#209385,6.500000000092E-02); +#209385 = AXIS2_PLACEMENT_3D('',#209386,#209387,#209388); +#209386 = CARTESIAN_POINT('',(116.95959734486,-75.814285,1.585)); +#209387 = DIRECTION('',(0.,0.,-1.)); +#209388 = DIRECTION('',(-5.305658244296E-06,-0.999999999986,-0.)); +#209389 = ORIENTED_EDGE('',*,*,#209390,.T.); +#209390 = EDGE_CURVE('',#209382,#209391,#209393,.T.); +#209391 = VERTEX_POINT('',#209392); +#209392 = CARTESIAN_POINT('',(117.859597,-75.749285,1.585)); +#209393 = LINE('',#209394,#209395); +#209394 = CARTESIAN_POINT('',(116.959597,-75.749285,1.585)); +#209395 = VECTOR('',#209396,1.); +#209396 = DIRECTION('',(1.,0.,0.)); +#209397 = ORIENTED_EDGE('',*,*,#209398,.T.); +#209398 = EDGE_CURVE('',#209391,#209399,#209401,.T.); +#209399 = VERTEX_POINT('',#209400); +#209400 = CARTESIAN_POINT('',(117.891846,-75.870721,1.585)); +#209401 = CIRCLE('',#209402,6.500021194141E-02); +#209402 = AXIS2_PLACEMENT_3D('',#209403,#209404,#209405); +#209403 = CARTESIAN_POINT('',(117.85959651351,-75.81428521194,1.585)); +#209404 = DIRECTION('',(0.,0.,-1.)); +#209405 = DIRECTION('',(7.484331896835E-06,0.999999999972,0.)); +#209406 = ORIENTED_EDGE('',*,*,#209407,.T.); +#209407 = EDGE_CURVE('',#209399,#209408,#209410,.T.); +#209408 = VERTEX_POINT('',#209409); +#209409 = CARTESIAN_POINT('',(117.204359,-76.263571,1.585)); +#209410 = LINE('',#209411,#209412); +#209411 = CARTESIAN_POINT('',(117.891846,-75.870721,1.585)); +#209412 = VECTOR('',#209413,1.); +#209413 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#209414 = ORIENTED_EDGE('',*,*,#209415,.T.); +#209415 = EDGE_CURVE('',#209408,#209416,#209418,.T.); +#209416 = VERTEX_POINT('',#209417); +#209417 = CARTESIAN_POINT('',(117.859597,-76.263571,1.585)); +#209418 = LINE('',#209419,#209420); +#209419 = CARTESIAN_POINT('',(117.204359,-76.263571,1.585)); +#209420 = VECTOR('',#209421,1.); +#209421 = DIRECTION('',(1.,0.,0.)); +#209422 = ORIENTED_EDGE('',*,*,#209423,.T.); +#209423 = EDGE_CURVE('',#209416,#209424,#209426,.T.); +#209424 = VERTEX_POINT('',#209425); +#209425 = CARTESIAN_POINT('',(117.859597,-76.393571,1.585)); +#209426 = CIRCLE('',#209427,6.500000000092E-02); +#209427 = AXIS2_PLACEMENT_3D('',#209428,#209429,#209430); +#209428 = CARTESIAN_POINT('',(117.85959665513,-76.328571,1.585)); +#209429 = DIRECTION('',(0.,0.,-1.)); +#209430 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#209431 = ORIENTED_EDGE('',*,*,#209432,.T.); +#209432 = EDGE_CURVE('',#209424,#209433,#209435,.T.); +#209433 = VERTEX_POINT('',#209434); +#209434 = CARTESIAN_POINT('',(116.959597,-76.393571,1.585)); +#209435 = LINE('',#209436,#209437); +#209436 = CARTESIAN_POINT('',(117.859597,-76.393571,1.585)); +#209437 = VECTOR('',#209438,1.); +#209438 = DIRECTION('',(-1.,0.,0.)); +#209439 = ORIENTED_EDGE('',*,*,#209440,.T.); +#209440 = EDGE_CURVE('',#209433,#209441,#209443,.T.); +#209441 = VERTEX_POINT('',#209442); +#209442 = CARTESIAN_POINT('',(116.927348,-76.272135,1.585)); +#209443 = CIRCLE('',#209444,6.50002119414E-02); +#209444 = AXIS2_PLACEMENT_3D('',#209445,#209446,#209447); +#209445 = CARTESIAN_POINT('',(116.95959748648,-76.32857078806,1.585)); +#209446 = DIRECTION('',(0.,0.,-1.)); +#209447 = DIRECTION('',(-7.484332115465E-06,-0.999999999972,-0.)); +#209448 = ORIENTED_EDGE('',*,*,#209449,.T.); +#209449 = EDGE_CURVE('',#209441,#209450,#209452,.T.); +#209450 = VERTEX_POINT('',#209451); +#209451 = CARTESIAN_POINT('',(117.614835,-75.879285,1.585)); +#209452 = LINE('',#209453,#209454); +#209453 = CARTESIAN_POINT('',(116.927348,-76.272135,1.585)); +#209454 = VECTOR('',#209455,1.); +#209455 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#209456 = ORIENTED_EDGE('',*,*,#209457,.T.); +#209457 = EDGE_CURVE('',#209450,#209380,#209458,.T.); +#209458 = LINE('',#209459,#209460); +#209459 = CARTESIAN_POINT('',(117.614835,-75.879285,1.585)); +#209460 = VECTOR('',#209461,1.); +#209461 = DIRECTION('',(-1.,0.,0.)); +#209462 = PLANE('',#209463); +#209463 = AXIS2_PLACEMENT_3D('',#209464,#209465,#209466); +#209464 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209465 = DIRECTION('',(0.,0.,1.)); +#209466 = DIRECTION('',(1.,0.,-0.)); +#209467 = SHELL_BASED_SURFACE_MODEL('',(#209468)); +#209468 = OPEN_SHELL('',(#209469)); +#209469 = ADVANCED_FACE('',(#209470),#209555,.T.); +#209470 = FACE_BOUND('',#209471,.F.); +#209471 = EDGE_LOOP('',(#209472,#209483,#209491,#209499,#209508,#209516, + #209524,#209533,#209541,#209549)); +#209472 = ORIENTED_EDGE('',*,*,#209473,.T.); +#209473 = EDGE_CURVE('',#209474,#209476,#209478,.T.); +#209474 = VERTEX_POINT('',#209475); +#209475 = CARTESIAN_POINT('',(185.009287,-75.276875,1.585)); +#209476 = VERTEX_POINT('',#209477); +#209477 = CARTESIAN_POINT('',(185.178286,-75.346877,1.585)); +#209478 = CIRCLE('',#209479,0.109999394362); +#209479 = AXIS2_PLACEMENT_3D('',#209480,#209481,#209482); +#209480 = CARTESIAN_POINT('',(185.0704,-75.36833574562,1.585)); +#209481 = DIRECTION('',(0.,0.,-1.)); +#209482 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#209483 = ORIENTED_EDGE('',*,*,#209484,.T.); +#209484 = EDGE_CURVE('',#209476,#209485,#209487,.T.); +#209485 = VERTEX_POINT('',#209486); +#209486 = CARTESIAN_POINT('',(185.1804,-75.71548,1.585)); +#209487 = LINE('',#209488,#209489); +#209488 = CARTESIAN_POINT('',(185.178286,-75.346877,1.585)); +#209489 = VECTOR('',#209490,1.); +#209490 = DIRECTION('',(5.735073327767E-03,-0.999983554332,0.)); +#209491 = ORIENTED_EDGE('',*,*,#209492,.T.); +#209492 = EDGE_CURVE('',#209485,#209493,#209495,.T.); +#209493 = VERTEX_POINT('',#209494); +#209494 = CARTESIAN_POINT('',(186.69186,-75.717594,1.585)); +#209495 = LINE('',#209496,#209497); +#209496 = CARTESIAN_POINT('',(185.1804,-75.71548,1.585)); +#209497 = VECTOR('',#209498,1.); +#209498 = DIRECTION('',(0.999999021894,-1.398646297149E-03,0.)); +#209499 = ORIENTED_EDGE('',*,*,#209500,.T.); +#209500 = EDGE_CURVE('',#209493,#209501,#209503,.T.); +#209501 = VERTEX_POINT('',#209502); +#209502 = CARTESIAN_POINT('',(186.69186,-75.933366,1.585)); +#209503 = CIRCLE('',#209504,0.109999639072); +#209504 = AXIS2_PLACEMENT_3D('',#209505,#209506,#209507); +#209505 = CARTESIAN_POINT('',(186.6704,-75.82548,1.585)); +#209506 = DIRECTION('',(0.,0.,-1.)); +#209507 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#209508 = ORIENTED_EDGE('',*,*,#209509,.T.); +#209509 = EDGE_CURVE('',#209501,#209510,#209512,.T.); +#209510 = VERTEX_POINT('',#209511); +#209511 = CARTESIAN_POINT('',(185.1804,-75.93548,1.585)); +#209512 = LINE('',#209513,#209514); +#209513 = CARTESIAN_POINT('',(186.69186,-75.933366,1.585)); +#209514 = VECTOR('',#209515,1.); +#209515 = DIRECTION('',(-0.999999021894,-1.39864629714E-03,0.)); +#209516 = ORIENTED_EDGE('',*,*,#209517,.T.); +#209517 = EDGE_CURVE('',#209510,#209518,#209520,.T.); +#209518 = VERTEX_POINT('',#209519); +#209519 = CARTESIAN_POINT('',(185.178286,-76.304083,1.585)); +#209520 = LINE('',#209521,#209522); +#209521 = CARTESIAN_POINT('',(185.1804,-75.93548,1.585)); +#209522 = VECTOR('',#209523,1.); +#209523 = DIRECTION('',(-5.735073327767E-03,-0.999983554332,0.)); +#209524 = ORIENTED_EDGE('',*,*,#209525,.T.); +#209525 = EDGE_CURVE('',#209518,#209526,#209528,.T.); +#209526 = VERTEX_POINT('',#209527); +#209527 = CARTESIAN_POINT('',(184.962514,-76.304083,1.585)); +#209528 = CIRCLE('',#209529,0.109999639072); +#209529 = AXIS2_PLACEMENT_3D('',#209530,#209531,#209532); +#209530 = CARTESIAN_POINT('',(185.0704,-76.282623,1.585)); +#209531 = DIRECTION('',(-0.,0.,-1.)); +#209532 = DIRECTION('',(0.980785036297,-0.195091549218,-0.)); +#209533 = ORIENTED_EDGE('',*,*,#209534,.T.); +#209534 = EDGE_CURVE('',#209526,#209535,#209537,.T.); +#209535 = VERTEX_POINT('',#209536); +#209536 = CARTESIAN_POINT('',(184.962514,-75.346877,1.585)); +#209537 = LINE('',#209538,#209539); +#209538 = CARTESIAN_POINT('',(184.962514,-76.304083,1.585)); +#209539 = VECTOR('',#209540,1.); +#209540 = DIRECTION('',(0.,1.,0.)); +#209541 = ORIENTED_EDGE('',*,*,#209542,.T.); +#209542 = EDGE_CURVE('',#209535,#209543,#209545,.T.); +#209543 = VERTEX_POINT('',#209544); +#209544 = CARTESIAN_POINT('',(184.978938,-75.307224,1.585)); +#209545 = LINE('',#209546,#209547); +#209546 = CARTESIAN_POINT('',(184.962514,-75.346877,1.585)); +#209547 = VECTOR('',#209548,1.); +#209548 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#209549 = ORIENTED_EDGE('',*,*,#209550,.T.); +#209550 = EDGE_CURVE('',#209543,#209474,#209551,.T.); +#209551 = LINE('',#209552,#209553); +#209552 = CARTESIAN_POINT('',(184.978938,-75.307224,1.585)); +#209553 = VECTOR('',#209554,1.); +#209554 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209555 = PLANE('',#209556); +#209556 = AXIS2_PLACEMENT_3D('',#209557,#209558,#209559); +#209557 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209558 = DIRECTION('',(0.,0.,1.)); +#209559 = DIRECTION('',(1.,0.,-0.)); +#209560 = SHELL_BASED_SURFACE_MODEL('',(#209561)); +#209561 = OPEN_SHELL('',(#209562)); +#209562 = ADVANCED_FACE('',(#209563,#209632),#209658,.T.); +#209563 = FACE_BOUND('',#209564,.F.); +#209564 = EDGE_LOOP('',(#209565,#209576,#209584,#209593,#209601,#209609, + #209617,#209626)); +#209565 = ORIENTED_EDGE('',*,*,#209566,.T.); +#209566 = EDGE_CURVE('',#209567,#209569,#209571,.T.); +#209567 = VERTEX_POINT('',#209568); +#209568 = CARTESIAN_POINT('',(142.239042,-76.083092,1.585)); +#209569 = VERTEX_POINT('',#209570); +#209570 = CARTESIAN_POINT('',(142.239042,-75.959764,1.585)); +#209571 = CIRCLE('',#209572,6.499975994818E-02); +#209572 = AXIS2_PLACEMENT_3D('',#209573,#209574,#209575); +#209573 = CARTESIAN_POINT('',(142.25959728879,-76.021428,1.585)); +#209574 = DIRECTION('',(0.,0.,-1.)); +#209575 = DIRECTION('',(-0.316236380079,-0.948680426653,-0.)); +#209576 = ORIENTED_EDGE('',*,*,#209577,.T.); +#209577 = EDGE_CURVE('',#209569,#209578,#209580,.T.); +#209578 = VERTEX_POINT('',#209579); +#209579 = CARTESIAN_POINT('',(143.139042,-75.659764,1.585)); +#209580 = LINE('',#209581,#209582); +#209581 = CARTESIAN_POINT('',(142.239042,-75.959764,1.585)); +#209582 = VECTOR('',#209583,1.); +#209583 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#209584 = ORIENTED_EDGE('',*,*,#209585,.T.); +#209585 = EDGE_CURVE('',#209578,#209586,#209588,.T.); +#209586 = VERTEX_POINT('',#209587); +#209587 = CARTESIAN_POINT('',(143.180152,-75.783093,1.585)); +#209588 = CIRCLE('',#209589,6.500014296397E-02); +#209589 = AXIS2_PLACEMENT_3D('',#209590,#209591,#209592); +#209590 = CARTESIAN_POINT('',(143.15959672008,-75.7214285933,1.585)); +#209591 = DIRECTION('',(0.,0.,-1.)); +#209592 = DIRECTION('',(-0.316225767373,0.948683964263,-0.)); +#209593 = ORIENTED_EDGE('',*,*,#209594,.T.); +#209594 = EDGE_CURVE('',#209586,#209595,#209597,.T.); +#209595 = VERTEX_POINT('',#209596); +#209596 = CARTESIAN_POINT('',(142.967454,-75.853992,1.585)); +#209597 = LINE('',#209598,#209599); +#209598 = CARTESIAN_POINT('',(143.180152,-75.783093,1.585)); +#209599 = VECTOR('',#209600,1.); +#209600 = DIRECTION('',(-0.948683744073,-0.316226427945,0.)); +#209601 = ORIENTED_EDGE('',*,*,#209602,.T.); +#209602 = EDGE_CURVE('',#209595,#209603,#209605,.T.); +#209603 = VERTEX_POINT('',#209604); +#209604 = CARTESIAN_POINT('',(142.967454,-76.188863,1.585)); +#209605 = LINE('',#209606,#209607); +#209606 = CARTESIAN_POINT('',(142.967454,-75.853992,1.585)); +#209607 = VECTOR('',#209608,1.); +#209608 = DIRECTION('',(0.,-1.,0.)); +#209609 = ORIENTED_EDGE('',*,*,#209610,.T.); +#209610 = EDGE_CURVE('',#209603,#209611,#209613,.T.); +#209611 = VERTEX_POINT('',#209612); +#209612 = CARTESIAN_POINT('',(143.180152,-76.259763,1.585)); +#209613 = LINE('',#209614,#209615); +#209614 = CARTESIAN_POINT('',(142.967454,-76.188863,1.585)); +#209615 = VECTOR('',#209616,1.); +#209616 = DIRECTION('',(0.948682406,-0.316230442155,0.)); +#209617 = ORIENTED_EDGE('',*,*,#209618,.T.); +#209618 = EDGE_CURVE('',#209611,#209619,#209621,.T.); +#209619 = VERTEX_POINT('',#209620); +#209620 = CARTESIAN_POINT('',(143.139042,-76.383092,1.585)); +#209621 = CIRCLE('',#209622,6.500014296694E-02); +#209622 = AXIS2_PLACEMENT_3D('',#209623,#209624,#209625); +#209623 = CARTESIAN_POINT('',(143.15959634729,-76.32142728242,1.585)); +#209624 = DIRECTION('',(0.,0.,-1.)); +#209625 = DIRECTION('',(0.31624011532,0.948679181527,0.)); +#209626 = ORIENTED_EDGE('',*,*,#209627,.T.); +#209627 = EDGE_CURVE('',#209619,#209567,#209628,.T.); +#209628 = LINE('',#209629,#209630); +#209629 = CARTESIAN_POINT('',(143.139042,-76.383092,1.585)); +#209630 = VECTOR('',#209631,1.); +#209631 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#209632 = FACE_BOUND('',#209633,.F.); +#209633 = EDGE_LOOP('',(#209634,#209644,#209652)); +#209634 = ORIENTED_EDGE('',*,*,#209635,.T.); +#209635 = EDGE_CURVE('',#209636,#209638,#209640,.T.); +#209636 = VERTEX_POINT('',#209637); +#209637 = CARTESIAN_POINT('',(142.465144,-76.021428,1.585)); +#209638 = VERTEX_POINT('',#209639); +#209639 = CARTESIAN_POINT('',(142.837454,-76.14553,1.585)); +#209640 = LINE('',#209641,#209642); +#209641 = CARTESIAN_POINT('',(142.465144,-76.021428,1.585)); +#209642 = VECTOR('',#209643,1.); +#209643 = DIRECTION('',(0.948684317287,-0.316224708291,0.)); +#209644 = ORIENTED_EDGE('',*,*,#209645,.T.); +#209645 = EDGE_CURVE('',#209638,#209646,#209648,.T.); +#209646 = VERTEX_POINT('',#209647); +#209647 = CARTESIAN_POINT('',(142.837454,-75.897325,1.585)); +#209648 = LINE('',#209649,#209650); +#209649 = CARTESIAN_POINT('',(142.837454,-76.14553,1.585)); +#209650 = VECTOR('',#209651,1.); +#209651 = DIRECTION('',(0.,1.,0.)); +#209652 = ORIENTED_EDGE('',*,*,#209653,.T.); +#209653 = EDGE_CURVE('',#209646,#209636,#209654,.T.); +#209654 = LINE('',#209655,#209656); +#209655 = CARTESIAN_POINT('',(142.837454,-75.897325,1.585)); +#209656 = VECTOR('',#209657,1.); +#209657 = DIRECTION('',(-0.94868355286,-0.316227001586,0.)); +#209658 = PLANE('',#209659); +#209659 = AXIS2_PLACEMENT_3D('',#209660,#209661,#209662); +#209660 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209661 = DIRECTION('',(0.,0.,1.)); +#209662 = DIRECTION('',(1.,0.,-0.)); +#209663 = SHELL_BASED_SURFACE_MODEL('',(#209664)); +#209664 = OPEN_SHELL('',(#209665)); +#209665 = ADVANCED_FACE('',(#209666,#209767),#209826,.T.); +#209666 = FACE_BOUND('',#209667,.F.); +#209667 = EDGE_LOOP('',(#209668,#209679,#209687,#209695,#209703,#209711, + #209719,#209728,#209736,#209745,#209753,#209761)); +#209668 = ORIENTED_EDGE('',*,*,#209669,.T.); +#209669 = EDGE_CURVE('',#209670,#209672,#209674,.T.); +#209670 = VERTEX_POINT('',#209671); +#209671 = CARTESIAN_POINT('',(137.228013,-75.776818,1.585)); +#209672 = VERTEX_POINT('',#209673); +#209673 = CARTESIAN_POINT('',(137.508666,-75.727575,1.585)); +#209674 = CIRCLE('',#209675,0.327183487819); +#209675 = AXIS2_PLACEMENT_3D('',#209676,#209677,#209678); +#209676 = CARTESIAN_POINT('',(137.41924076591,-76.04230053472,1.585)); +#209677 = DIRECTION('',(0.,0.,-1.)); +#209678 = DIRECTION('',(-0.584466432542,0.811417888163,0.)); +#209679 = ORIENTED_EDGE('',*,*,#209680,.T.); +#209680 = EDGE_CURVE('',#209672,#209681,#209683,.T.); +#209681 = VERTEX_POINT('',#209682); +#209682 = CARTESIAN_POINT('',(137.611273,-75.782608,1.585)); +#209683 = LINE('',#209684,#209685); +#209684 = CARTESIAN_POINT('',(137.508666,-75.727575,1.585)); +#209685 = VECTOR('',#209686,1.); +#209686 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#209687 = ORIENTED_EDGE('',*,*,#209688,.T.); +#209688 = EDGE_CURVE('',#209681,#209689,#209691,.T.); +#209689 = VERTEX_POINT('',#209690); +#209690 = CARTESIAN_POINT('',(137.666306,-75.842358,1.585)); +#209691 = LINE('',#209692,#209693); +#209692 = CARTESIAN_POINT('',(137.611273,-75.782608,1.585)); +#209693 = VECTOR('',#209694,1.); +#209694 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#209695 = ORIENTED_EDGE('',*,*,#209696,.T.); +#209696 = EDGE_CURVE('',#209689,#209697,#209699,.T.); +#209697 = VERTEX_POINT('',#209698); +#209698 = CARTESIAN_POINT('',(137.713109,-75.942485,1.585)); +#209699 = LINE('',#209700,#209701); +#209700 = CARTESIAN_POINT('',(137.666306,-75.842358,1.585)); +#209701 = VECTOR('',#209702,1.); +#209702 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#209703 = ORIENTED_EDGE('',*,*,#209704,.T.); +#209704 = EDGE_CURVE('',#209697,#209705,#209707,.T.); +#209705 = VERTEX_POINT('',#209706); +#209706 = CARTESIAN_POINT('',(137.716025,-76.234999,1.585)); +#209707 = LINE('',#209708,#209709); +#209708 = CARTESIAN_POINT('',(137.713109,-75.942485,1.585)); +#209709 = VECTOR('',#209710,1.); +#209710 = DIRECTION('',(9.968258341542E-03,-0.999950315679,0.)); +#209711 = ORIENTED_EDGE('',*,*,#209712,.T.); +#209712 = EDGE_CURVE('',#209705,#209713,#209715,.T.); +#209713 = VERTEX_POINT('',#209714); +#209714 = CARTESIAN_POINT('',(138.079597,-76.234999,1.585)); +#209715 = LINE('',#209716,#209717); +#209716 = CARTESIAN_POINT('',(137.716025,-76.234999,1.585)); +#209717 = VECTOR('',#209718,1.); +#209718 = DIRECTION('',(1.,0.,0.)); +#209719 = ORIENTED_EDGE('',*,*,#209720,.T.); +#209720 = EDGE_CURVE('',#209713,#209721,#209723,.T.); +#209721 = VERTEX_POINT('',#209722); +#209722 = CARTESIAN_POINT('',(138.079597,-76.364999,1.585)); +#209723 = CIRCLE('',#209724,6.500000000092E-02); +#209724 = AXIS2_PLACEMENT_3D('',#209725,#209726,#209727); +#209725 = CARTESIAN_POINT('',(138.07959665513,-76.299999,1.585)); +#209726 = DIRECTION('',(0.,0.,-1.)); +#209727 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#209728 = ORIENTED_EDGE('',*,*,#209729,.T.); +#209729 = EDGE_CURVE('',#209721,#209730,#209732,.T.); +#209730 = VERTEX_POINT('',#209731); +#209731 = CARTESIAN_POINT('',(137.179597,-76.364999,1.585)); +#209732 = LINE('',#209733,#209734); +#209733 = CARTESIAN_POINT('',(138.079597,-76.364999,1.585)); +#209734 = VECTOR('',#209735,1.); +#209735 = DIRECTION('',(-1.,0.,0.)); +#209736 = ORIENTED_EDGE('',*,*,#209737,.T.); +#209737 = EDGE_CURVE('',#209730,#209738,#209740,.T.); +#209738 = VERTEX_POINT('',#209739); +#209739 = CARTESIAN_POINT('',(137.114597,-76.299999,1.585)); +#209740 = CIRCLE('',#209741,6.500103935386E-02); +#209741 = AXIS2_PLACEMENT_3D('',#209742,#209743,#209744); +#209742 = CARTESIAN_POINT('',(137.17959803934,-76.29999796065,1.585)); +#209743 = DIRECTION('',(0.,0.,-1.)); +#209744 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#209745 = ORIENTED_EDGE('',*,*,#209746,.T.); +#209746 = EDGE_CURVE('',#209738,#209747,#209749,.T.); +#209747 = VERTEX_POINT('',#209748); +#209748 = CARTESIAN_POINT('',(137.117512,-75.942485,1.585)); +#209749 = LINE('',#209750,#209751); +#209750 = CARTESIAN_POINT('',(137.114597,-76.299999,1.585)); +#209751 = VECTOR('',#209752,1.); +#209752 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#209753 = ORIENTED_EDGE('',*,*,#209754,.T.); +#209754 = EDGE_CURVE('',#209747,#209755,#209757,.T.); +#209755 = VERTEX_POINT('',#209756); +#209756 = CARTESIAN_POINT('',(137.170702,-75.834129,1.585)); +#209757 = LINE('',#209758,#209759); +#209758 = CARTESIAN_POINT('',(137.117512,-75.942485,1.585)); +#209759 = VECTOR('',#209760,1.); +#209760 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#209761 = ORIENTED_EDGE('',*,*,#209762,.T.); +#209762 = EDGE_CURVE('',#209755,#209670,#209763,.T.); +#209763 = LINE('',#209764,#209765); +#209764 = CARTESIAN_POINT('',(137.170702,-75.834129,1.585)); +#209765 = VECTOR('',#209766,1.); +#209766 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209767 = FACE_BOUND('',#209768,.F.); +#209768 = EDGE_LOOP('',(#209769,#209780,#209788,#209796,#209804,#209812, + #209820)); +#209769 = ORIENTED_EDGE('',*,*,#209770,.T.); +#209770 = EDGE_CURVE('',#209771,#209773,#209775,.T.); +#209771 = VERTEX_POINT('',#209772); +#209772 = CARTESIAN_POINT('',(137.526808,-75.881991,1.585)); +#209773 = VERTEX_POINT('',#209774); +#209774 = CARTESIAN_POINT('',(137.275875,-75.909929,1.585)); +#209775 = CIRCLE('',#209776,0.180979134862); +#209776 = AXIS2_PLACEMENT_3D('',#209777,#209778,#209779); +#209777 = CARTESIAN_POINT('',(137.41569076987,-76.02484200078,1.585)); +#209778 = DIRECTION('',(0.,0.,1.)); +#209779 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#209780 = ORIENTED_EDGE('',*,*,#209781,.T.); +#209781 = EDGE_CURVE('',#209773,#209782,#209784,.T.); +#209782 = VERTEX_POINT('',#209783); +#209783 = CARTESIAN_POINT('',(137.244597,-75.972486,1.585)); +#209784 = LINE('',#209785,#209786); +#209785 = CARTESIAN_POINT('',(137.275875,-75.909929,1.585)); +#209786 = VECTOR('',#209787,1.); +#209787 = DIRECTION('',(-0.447207876355,-0.89443005055,0.)); +#209788 = ORIENTED_EDGE('',*,*,#209789,.T.); +#209789 = EDGE_CURVE('',#209782,#209790,#209792,.T.); +#209790 = VERTEX_POINT('',#209791); +#209791 = CARTESIAN_POINT('',(137.244597,-76.234999,1.585)); +#209792 = LINE('',#209793,#209794); +#209793 = CARTESIAN_POINT('',(137.244597,-75.972486,1.585)); +#209794 = VECTOR('',#209795,1.); +#209795 = DIRECTION('',(0.,-1.,0.)); +#209796 = ORIENTED_EDGE('',*,*,#209797,.T.); +#209797 = EDGE_CURVE('',#209790,#209798,#209800,.T.); +#209798 = VERTEX_POINT('',#209799); +#209799 = CARTESIAN_POINT('',(137.586025,-76.234999,1.585)); +#209800 = LINE('',#209801,#209802); +#209801 = CARTESIAN_POINT('',(137.244597,-76.234999,1.585)); +#209802 = VECTOR('',#209803,1.); +#209803 = DIRECTION('',(1.,0.,0.)); +#209804 = ORIENTED_EDGE('',*,*,#209805,.T.); +#209805 = EDGE_CURVE('',#209798,#209806,#209808,.T.); +#209806 = VERTEX_POINT('',#209807); +#209807 = CARTESIAN_POINT('',(137.586025,-75.972486,1.585)); +#209808 = LINE('',#209809,#209810); +#209809 = CARTESIAN_POINT('',(137.586025,-76.234999,1.585)); +#209810 = VECTOR('',#209811,1.); +#209811 = DIRECTION('',(0.,1.,0.)); +#209812 = ORIENTED_EDGE('',*,*,#209813,.T.); +#209813 = EDGE_CURVE('',#209806,#209814,#209816,.T.); +#209814 = VERTEX_POINT('',#209815); +#209815 = CARTESIAN_POINT('',(137.554746,-75.909929,1.585)); +#209816 = LINE('',#209817,#209818); +#209817 = CARTESIAN_POINT('',(137.586025,-75.972486,1.585)); +#209818 = VECTOR('',#209819,1.); +#209819 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#209820 = ORIENTED_EDGE('',*,*,#209821,.T.); +#209821 = EDGE_CURVE('',#209814,#209771,#209822,.T.); +#209822 = LINE('',#209823,#209824); +#209823 = CARTESIAN_POINT('',(137.554746,-75.909929,1.585)); +#209824 = VECTOR('',#209825,1.); +#209825 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209826 = PLANE('',#209827); +#209827 = AXIS2_PLACEMENT_3D('',#209828,#209829,#209830); +#209828 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209829 = DIRECTION('',(0.,0.,1.)); +#209830 = DIRECTION('',(1.,0.,-0.)); +#209831 = SHELL_BASED_SURFACE_MODEL('',(#209832)); +#209832 = OPEN_SHELL('',(#209833)); +#209833 = ADVANCED_FACE('',(#209834),#209936,.T.); +#209834 = FACE_BOUND('',#209835,.F.); +#209835 = EDGE_LOOP('',(#209836,#209846,#209855,#209863,#209871,#209880, + #209888,#209896,#209905,#209913,#209921,#209930)); +#209836 = ORIENTED_EDGE('',*,*,#209837,.T.); +#209837 = EDGE_CURVE('',#209838,#209840,#209842,.T.); +#209838 = VERTEX_POINT('',#209839); +#209839 = CARTESIAN_POINT('',(119.809596,-75.90045,1.585)); +#209840 = VERTEX_POINT('',#209841); +#209841 = CARTESIAN_POINT('',(120.223541,-75.624488,1.585)); +#209842 = LINE('',#209843,#209844); +#209843 = CARTESIAN_POINT('',(119.809596,-75.90045,1.585)); +#209844 = VECTOR('',#209845,1.); +#209845 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#209846 = ORIENTED_EDGE('',*,*,#209847,.T.); +#209847 = EDGE_CURVE('',#209840,#209848,#209850,.T.); +#209848 = VERTEX_POINT('',#209849); +#209849 = CARTESIAN_POINT('',(120.295652,-75.732654,1.585)); +#209850 = CIRCLE('',#209851,6.499976899535E-02); +#209851 = AXIS2_PLACEMENT_3D('',#209852,#209853,#209854); +#209852 = CARTESIAN_POINT('',(120.25959612917,-75.67857124722,1.585)); +#209853 = DIRECTION('',(0.,0.,-1.)); +#209854 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#209855 = ORIENTED_EDGE('',*,*,#209856,.T.); +#209856 = EDGE_CURVE('',#209848,#209857,#209859,.T.); +#209857 = VERTEX_POINT('',#209858); +#209858 = CARTESIAN_POINT('',(119.926776,-75.978571,1.585)); +#209859 = LINE('',#209860,#209861); +#209860 = CARTESIAN_POINT('',(120.295652,-75.732654,1.585)); +#209861 = VECTOR('',#209862,1.); +#209862 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#209863 = ORIENTED_EDGE('',*,*,#209864,.T.); +#209864 = EDGE_CURVE('',#209857,#209865,#209867,.T.); +#209865 = VERTEX_POINT('',#209866); +#209866 = CARTESIAN_POINT('',(120.295652,-76.224488,1.585)); +#209867 = LINE('',#209868,#209869); +#209868 = CARTESIAN_POINT('',(119.926776,-75.978571,1.585)); +#209869 = VECTOR('',#209870,1.); +#209870 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#209871 = ORIENTED_EDGE('',*,*,#209872,.T.); +#209872 = EDGE_CURVE('',#209865,#209873,#209875,.T.); +#209873 = VERTEX_POINT('',#209874); +#209874 = CARTESIAN_POINT('',(120.223541,-76.332654,1.585)); +#209875 = CIRCLE('',#209876,6.499976899541E-02); +#209876 = AXIS2_PLACEMENT_3D('',#209877,#209878,#209879); +#209877 = CARTESIAN_POINT('',(120.25959687747,-76.27857125164,1.585)); +#209878 = DIRECTION('',(0.,0.,-1.)); +#209879 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#209880 = ORIENTED_EDGE('',*,*,#209881,.T.); +#209881 = EDGE_CURVE('',#209873,#209882,#209884,.T.); +#209882 = VERTEX_POINT('',#209883); +#209883 = CARTESIAN_POINT('',(119.809596,-76.056691,1.585)); +#209884 = LINE('',#209885,#209886); +#209885 = CARTESIAN_POINT('',(120.223541,-76.332654,1.585)); +#209886 = VECTOR('',#209887,1.); +#209887 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#209888 = ORIENTED_EDGE('',*,*,#209889,.T.); +#209889 = EDGE_CURVE('',#209882,#209890,#209892,.T.); +#209890 = VERTEX_POINT('',#209891); +#209891 = CARTESIAN_POINT('',(119.395653,-76.332654,1.585)); +#209892 = LINE('',#209893,#209894); +#209893 = CARTESIAN_POINT('',(119.809596,-76.056691,1.585)); +#209894 = VECTOR('',#209895,1.); +#209895 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#209896 = ORIENTED_EDGE('',*,*,#209897,.T.); +#209897 = EDGE_CURVE('',#209890,#209898,#209900,.T.); +#209898 = VERTEX_POINT('',#209899); +#209899 = CARTESIAN_POINT('',(119.323541,-76.224488,1.585)); +#209900 = CIRCLE('',#209901,6.500004634766E-02); +#209901 = AXIS2_PLACEMENT_3D('',#209902,#209903,#209904); +#209902 = CARTESIAN_POINT('',(119.35959737004,-76.2785707533,1.585)); +#209903 = DIRECTION('',(0.,0.,-1.)); +#209904 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#209905 = ORIENTED_EDGE('',*,*,#209906,.T.); +#209906 = EDGE_CURVE('',#209898,#209907,#209909,.T.); +#209907 = VERTEX_POINT('',#209908); +#209908 = CARTESIAN_POINT('',(119.692416,-75.978571,1.585)); +#209909 = LINE('',#209910,#209911); +#209910 = CARTESIAN_POINT('',(119.323541,-76.224488,1.585)); +#209911 = VECTOR('',#209912,1.); +#209912 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#209913 = ORIENTED_EDGE('',*,*,#209914,.T.); +#209914 = EDGE_CURVE('',#209907,#209915,#209917,.T.); +#209915 = VERTEX_POINT('',#209916); +#209916 = CARTESIAN_POINT('',(119.323541,-75.732654,1.585)); +#209917 = LINE('',#209918,#209919); +#209918 = CARTESIAN_POINT('',(119.692416,-75.978571,1.585)); +#209919 = VECTOR('',#209920,1.); +#209920 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#209921 = ORIENTED_EDGE('',*,*,#209922,.T.); +#209922 = EDGE_CURVE('',#209915,#209923,#209925,.T.); +#209923 = VERTEX_POINT('',#209924); +#209924 = CARTESIAN_POINT('',(119.395653,-75.624488,1.585)); +#209925 = CIRCLE('',#209926,6.500004634723E-02); +#209926 = AXIS2_PLACEMENT_3D('',#209927,#209928,#209929); +#209927 = CARTESIAN_POINT('',(119.35959731405,-75.67857120937,1.585)); +#209928 = DIRECTION('',(0.,0.,-1.)); +#209929 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#209930 = ORIENTED_EDGE('',*,*,#209931,.T.); +#209931 = EDGE_CURVE('',#209923,#209838,#209932,.T.); +#209932 = LINE('',#209933,#209934); +#209933 = CARTESIAN_POINT('',(119.395653,-75.624488,1.585)); +#209934 = VECTOR('',#209935,1.); +#209935 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#209936 = PLANE('',#209937); +#209937 = AXIS2_PLACEMENT_3D('',#209938,#209939,#209940); +#209938 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209939 = DIRECTION('',(0.,0.,1.)); +#209940 = DIRECTION('',(1.,0.,-0.)); +#209941 = SHELL_BASED_SURFACE_MODEL('',(#209942)); +#209942 = OPEN_SHELL('',(#209943)); +#209943 = ADVANCED_FACE('',(#209944,#210055),#210107,.T.); +#209944 = FACE_BOUND('',#209945,.F.); +#209945 = EDGE_LOOP('',(#209946,#209957,#209965,#209974,#209982,#209991, + #209999,#210007,#210016,#210024,#210032,#210040,#210049)); +#209946 = ORIENTED_EDGE('',*,*,#209947,.T.); +#209947 = EDGE_CURVE('',#209948,#209950,#209952,.T.); +#209948 = VERTEX_POINT('',#209949); +#209949 = CARTESIAN_POINT('',(99.888329,-75.193287,1.585)); +#209950 = VERTEX_POINT('',#209951); +#209951 = CARTESIAN_POINT('',(99.961888,-75.132919,1.585)); +#209952 = CIRCLE('',#209953,7.500074938988E-02); +#209953 = AXIS2_PLACEMENT_3D('',#209954,#209955,#209956); +#209954 = CARTESIAN_POINT('',(99.96188846611,-75.20791974938,1.585)); +#209955 = DIRECTION('',(0.,0.,-1.)); +#209956 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#209957 = ORIENTED_EDGE('',*,*,#209958,.T.); +#209958 = EDGE_CURVE('',#209950,#209959,#209961,.T.); +#209959 = VERTEX_POINT('',#209960); +#209960 = CARTESIAN_POINT('',(100.357472,-75.13436,1.585)); +#209961 = LINE('',#209962,#209963); +#209962 = CARTESIAN_POINT('',(99.961888,-75.132919,1.585)); +#209963 = VECTOR('',#209964,1.); +#209964 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#209965 = ORIENTED_EDGE('',*,*,#209966,.T.); +#209966 = EDGE_CURVE('',#209959,#209967,#209969,.T.); +#209967 = VERTEX_POINT('',#209968); +#209968 = CARTESIAN_POINT('',(100.606875,-75.383763,1.585)); +#209969 = CIRCLE('',#209970,0.347870264855); +#209970 = AXIS2_PLACEMENT_3D('',#209971,#209972,#209973); +#209971 = CARTESIAN_POINT('',(100.27014426502,-75.47109073497,1.585)); +#209972 = DIRECTION('',(0.,0.,-1.)); +#209973 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#209974 = ORIENTED_EDGE('',*,*,#209975,.T.); +#209975 = EDGE_CURVE('',#209967,#209976,#209978,.T.); +#209976 = VERTEX_POINT('',#209977); +#209977 = CARTESIAN_POINT('',(100.605653,-75.561062,1.585)); +#209978 = LINE('',#209979,#209980); +#209979 = CARTESIAN_POINT('',(100.606875,-75.383763,1.585)); +#209980 = VECTOR('',#209981,1.); +#209981 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#209982 = ORIENTED_EDGE('',*,*,#209983,.T.); +#209983 = EDGE_CURVE('',#209976,#209984,#209986,.T.); +#209984 = VERTEX_POINT('',#209985); +#209985 = CARTESIAN_POINT('',(100.357472,-75.805287,1.585)); +#209986 = CIRCLE('',#209987,0.348632345849); +#209987 = AXIS2_PLACEMENT_3D('',#209988,#209989,#209990); +#209988 = CARTESIAN_POINT('',(100.26970319403,-75.4678834593,1.585)); +#209989 = DIRECTION('',(0.,0.,-1.)); +#209990 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#209991 = ORIENTED_EDGE('',*,*,#209992,.T.); +#209992 = EDGE_CURVE('',#209984,#209993,#209995,.T.); +#209993 = VERTEX_POINT('',#209994); +#209994 = CARTESIAN_POINT('',(100.343955,-75.806618,1.585)); +#209995 = LINE('',#209996,#209997); +#209996 = CARTESIAN_POINT('',(100.357472,-75.805287,1.585)); +#209997 = VECTOR('',#209998,1.); +#209998 = DIRECTION('',(-0.995186940545,-9.799465989924E-02,0.)); +#209999 = ORIENTED_EDGE('',*,*,#210000,.T.); +#210000 = EDGE_CURVE('',#209993,#210001,#210003,.T.); +#210001 = VERTEX_POINT('',#210002); +#210002 = CARTESIAN_POINT('',(100.601969,-76.177723,1.585)); +#210003 = LINE('',#210004,#210005); +#210004 = CARTESIAN_POINT('',(100.343955,-75.806618,1.585)); +#210005 = VECTOR('',#210006,1.); +#210006 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#210007 = ORIENTED_EDGE('',*,*,#210008,.T.); +#210008 = EDGE_CURVE('',#210001,#210009,#210011,.T.); +#210009 = VERTEX_POINT('',#210010); +#210010 = CARTESIAN_POINT('',(100.471874,-76.250929,1.585)); +#210011 = CIRCLE('',#210012,7.500005951702E-02); +#210012 = AXIS2_PLACEMENT_3D('',#210013,#210014,#210015); +#210013 = CARTESIAN_POINT('',(100.53331606294,-76.20791874739,1.585)); +#210014 = DIRECTION('',(0.,0.,-1.)); +#210015 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#210016 = ORIENTED_EDGE('',*,*,#210017,.T.); +#210017 = EDGE_CURVE('',#210009,#210018,#210020,.T.); +#210018 = VERTEX_POINT('',#210019); +#210019 = CARTESIAN_POINT('',(100.160934,-75.806728,1.585)); +#210020 = LINE('',#210021,#210022); +#210021 = CARTESIAN_POINT('',(100.471874,-76.250929,1.585)); +#210022 = VECTOR('',#210023,1.); +#210023 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#210024 = ORIENTED_EDGE('',*,*,#210025,.T.); +#210025 = EDGE_CURVE('',#210018,#210026,#210028,.T.); +#210026 = VERTEX_POINT('',#210027); +#210027 = CARTESIAN_POINT('',(100.036888,-75.806728,1.585)); +#210028 = LINE('',#210029,#210030); +#210029 = CARTESIAN_POINT('',(100.160934,-75.806728,1.585)); +#210030 = VECTOR('',#210031,1.); +#210031 = DIRECTION('',(-1.,0.,0.)); +#210032 = ORIENTED_EDGE('',*,*,#210033,.T.); +#210033 = EDGE_CURVE('',#210026,#210034,#210036,.T.); +#210034 = VERTEX_POINT('',#210035); +#210035 = CARTESIAN_POINT('',(100.035447,-76.222551,1.585)); +#210036 = LINE('',#210037,#210038); +#210037 = CARTESIAN_POINT('',(100.036888,-75.806728,1.585)); +#210038 = VECTOR('',#210039,1.); +#210039 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#210040 = ORIENTED_EDGE('',*,*,#210041,.T.); +#210041 = EDGE_CURVE('',#210034,#210042,#210044,.T.); +#210042 = VERTEX_POINT('',#210043); +#210043 = CARTESIAN_POINT('',(99.886888,-76.207919,1.585)); +#210044 = CIRCLE('',#210045,7.500006711464E-02); +#210045 = AXIS2_PLACEMENT_3D('',#210046,#210047,#210048); +#210046 = CARTESIAN_POINT('',(99.961888067115,-76.20791906711,1.585)); +#210047 = DIRECTION('',(-0.,0.,-1.)); +#210048 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#210049 = ORIENTED_EDGE('',*,*,#210050,.T.); +#210050 = EDGE_CURVE('',#210042,#209948,#210051,.T.); +#210051 = LINE('',#210052,#210053); +#210052 = CARTESIAN_POINT('',(99.886888,-76.207919,1.585)); +#210053 = VECTOR('',#210054,1.); +#210054 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#210055 = FACE_BOUND('',#210056,.F.); +#210056 = EDGE_LOOP('',(#210057,#210068,#210076,#210084,#210092,#210101) + ); +#210057 = ORIENTED_EDGE('',*,*,#210058,.T.); +#210058 = EDGE_CURVE('',#210059,#210061,#210063,.T.); +#210059 = VERTEX_POINT('',#210060); +#210060 = CARTESIAN_POINT('',(100.458316,-75.4161,1.585)); +#210061 = VERTEX_POINT('',#210062); +#210062 = CARTESIAN_POINT('',(100.325135,-75.282919,1.585)); +#210063 = CIRCLE('',#210064,0.18686440374); +#210064 = AXIS2_PLACEMENT_3D('',#210065,#210066,#210067); +#210065 = CARTESIAN_POINT('',(100.277599,-75.463636,1.585)); +#210066 = DIRECTION('',(0.,0.,1.)); +#210067 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#210068 = ORIENTED_EDGE('',*,*,#210069,.T.); +#210069 = EDGE_CURVE('',#210061,#210070,#210072,.T.); +#210070 = VERTEX_POINT('',#210071); +#210071 = CARTESIAN_POINT('',(100.036888,-75.282919,1.585)); +#210072 = LINE('',#210073,#210074); +#210073 = CARTESIAN_POINT('',(100.325135,-75.282919,1.585)); +#210074 = VECTOR('',#210075,1.); +#210075 = DIRECTION('',(-1.,0.,0.)); +#210076 = ORIENTED_EDGE('',*,*,#210077,.T.); +#210077 = EDGE_CURVE('',#210070,#210078,#210080,.T.); +#210078 = VERTEX_POINT('',#210079); +#210079 = CARTESIAN_POINT('',(100.036888,-75.656728,1.585)); +#210080 = LINE('',#210081,#210082); +#210081 = CARTESIAN_POINT('',(100.036888,-75.282919,1.585)); +#210082 = VECTOR('',#210083,1.); +#210083 = DIRECTION('',(0.,-1.,0.)); +#210084 = ORIENTED_EDGE('',*,*,#210085,.T.); +#210085 = EDGE_CURVE('',#210078,#210086,#210088,.T.); +#210086 = VERTEX_POINT('',#210087); +#210087 = CARTESIAN_POINT('',(100.325135,-75.656728,1.585)); +#210088 = LINE('',#210089,#210090); +#210089 = CARTESIAN_POINT('',(100.036888,-75.656728,1.585)); +#210090 = VECTOR('',#210091,1.); +#210091 = DIRECTION('',(1.,0.,0.)); +#210092 = ORIENTED_EDGE('',*,*,#210093,.T.); +#210093 = EDGE_CURVE('',#210086,#210094,#210096,.T.); +#210094 = VERTEX_POINT('',#210095); +#210095 = CARTESIAN_POINT('',(100.458316,-75.523547,1.585)); +#210096 = CIRCLE('',#210097,0.18686440374); +#210097 = AXIS2_PLACEMENT_3D('',#210098,#210099,#210100); +#210098 = CARTESIAN_POINT('',(100.277599,-75.476011,1.585)); +#210099 = DIRECTION('',(0.,0.,1.)); +#210100 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#210101 = ORIENTED_EDGE('',*,*,#210102,.T.); +#210102 = EDGE_CURVE('',#210094,#210059,#210103,.T.); +#210103 = LINE('',#210104,#210105); +#210104 = CARTESIAN_POINT('',(100.458316,-75.523547,1.585)); +#210105 = VECTOR('',#210106,1.); +#210106 = DIRECTION('',(0.,1.,0.)); +#210107 = PLANE('',#210108); +#210108 = AXIS2_PLACEMENT_3D('',#210109,#210110,#210111); +#210109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210110 = DIRECTION('',(0.,0.,1.)); +#210111 = DIRECTION('',(1.,0.,-0.)); +#210112 = SHELL_BASED_SURFACE_MODEL('',(#210113)); +#210113 = OPEN_SHELL('',(#210114)); +#210114 = ADVANCED_FACE('',(#210115),#210167,.T.); +#210115 = FACE_BOUND('',#210116,.F.); +#210116 = EDGE_LOOP('',(#210117,#210128,#210136,#210145,#210153,#210161) + ); +#210117 = ORIENTED_EDGE('',*,*,#210118,.T.); +#210118 = EDGE_CURVE('',#210119,#210121,#210123,.T.); +#210119 = VERTEX_POINT('',#210120); +#210120 = CARTESIAN_POINT('',(100.92022,-75.478892,1.585)); +#210121 = VERTEX_POINT('',#210122); +#210122 = CARTESIAN_POINT('',(101.036888,-75.541252,1.585)); +#210123 = CIRCLE('',#210124,7.500000000004E-02); +#210124 = AXIS2_PLACEMENT_3D('',#210125,#210126,#210127); +#210125 = CARTESIAN_POINT('',(100.961888,-75.54125206555,1.585)); +#210126 = DIRECTION('',(0.,0.,-1.)); +#210127 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#210128 = ORIENTED_EDGE('',*,*,#210129,.T.); +#210129 = EDGE_CURVE('',#210121,#210130,#210132,.T.); +#210130 = VERTEX_POINT('',#210131); +#210131 = CARTESIAN_POINT('',(101.035447,-76.222551,1.585)); +#210132 = LINE('',#210133,#210134); +#210133 = CARTESIAN_POINT('',(101.036888,-75.541252,1.585)); +#210134 = VECTOR('',#210135,1.); +#210135 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#210136 = ORIENTED_EDGE('',*,*,#210137,.T.); +#210137 = EDGE_CURVE('',#210130,#210138,#210140,.T.); +#210138 = VERTEX_POINT('',#210139); +#210139 = CARTESIAN_POINT('',(100.886888,-76.207919,1.585)); +#210140 = CIRCLE('',#210141,7.500006711464E-02); +#210141 = AXIS2_PLACEMENT_3D('',#210142,#210143,#210144); +#210142 = CARTESIAN_POINT('',(100.96188806711,-76.20791906711,1.585)); +#210143 = DIRECTION('',(-0.,0.,-1.)); +#210144 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#210145 = ORIENTED_EDGE('',*,*,#210146,.T.); +#210146 = EDGE_CURVE('',#210138,#210147,#210149,.T.); +#210147 = VERTEX_POINT('',#210148); +#210148 = CARTESIAN_POINT('',(100.888329,-75.52662,1.585)); +#210149 = LINE('',#210150,#210151); +#210150 = CARTESIAN_POINT('',(100.886888,-76.207919,1.585)); +#210151 = VECTOR('',#210152,1.); +#210152 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#210153 = ORIENTED_EDGE('',*,*,#210154,.T.); +#210154 = EDGE_CURVE('',#210147,#210155,#210157,.T.); +#210155 = VERTEX_POINT('',#210156); +#210156 = CARTESIAN_POINT('',(100.899528,-75.499584,1.585)); +#210157 = LINE('',#210158,#210159); +#210158 = CARTESIAN_POINT('',(100.888329,-75.52662,1.585)); +#210159 = VECTOR('',#210160,1.); +#210160 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#210161 = ORIENTED_EDGE('',*,*,#210162,.T.); +#210162 = EDGE_CURVE('',#210155,#210119,#210163,.T.); +#210163 = LINE('',#210164,#210165); +#210164 = CARTESIAN_POINT('',(100.899528,-75.499584,1.585)); +#210165 = VECTOR('',#210166,1.); +#210166 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#210167 = PLANE('',#210168); +#210168 = AXIS2_PLACEMENT_3D('',#210169,#210170,#210171); +#210169 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210170 = DIRECTION('',(0.,0.,1.)); +#210171 = DIRECTION('',(1.,0.,-0.)); +#210172 = SHELL_BASED_SURFACE_MODEL('',(#210173)); +#210173 = OPEN_SHELL('',(#210174)); +#210174 = ADVANCED_FACE('',(#210175,#210293),#210361,.T.); +#210175 = FACE_BOUND('',#210176,.F.); +#210176 = EDGE_LOOP('',(#210177,#210188,#210196,#210204,#210213,#210221, + #210230,#210238,#210246,#210255,#210263,#210271,#210279,#210287)); +#210177 = ORIENTED_EDGE('',*,*,#210178,.T.); +#210178 = EDGE_CURVE('',#210179,#210181,#210183,.T.); +#210179 = VERTEX_POINT('',#210180); +#210180 = CARTESIAN_POINT('',(102.301172,-75.145559,1.585)); +#210181 = VERTEX_POINT('',#210182); +#210182 = CARTESIAN_POINT('',(102.41784,-75.207919,1.585)); +#210183 = CIRCLE('',#210184,7.500000000003E-02); +#210184 = AXIS2_PLACEMENT_3D('',#210185,#210186,#210187); +#210185 = CARTESIAN_POINT('',(102.34284,-75.20791906555,1.585)); +#210186 = DIRECTION('',(0.,0.,-1.)); +#210187 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#210188 = ORIENTED_EDGE('',*,*,#210189,.T.); +#210189 = EDGE_CURVE('',#210181,#210190,#210192,.T.); +#210190 = VERTEX_POINT('',#210191); +#210191 = CARTESIAN_POINT('',(102.418268,-75.468915,1.585)); +#210192 = LINE('',#210193,#210194); +#210193 = CARTESIAN_POINT('',(102.41784,-75.207919,1.585)); +#210194 = VECTOR('',#210195,1.); +#210195 = DIRECTION('',(1.639869670478E-03,-0.999998655413,0.)); +#210196 = ORIENTED_EDGE('',*,*,#210197,.T.); +#210197 = EDGE_CURVE('',#210190,#210198,#210200,.T.); +#210198 = VERTEX_POINT('',#210199); +#210199 = CARTESIAN_POINT('',(102.648363,-75.468915,1.585)); +#210200 = LINE('',#210201,#210202); +#210201 = CARTESIAN_POINT('',(102.418268,-75.468915,1.585)); +#210202 = VECTOR('',#210203,1.); +#210203 = DIRECTION('',(1.,0.,0.)); +#210204 = ORIENTED_EDGE('',*,*,#210205,.T.); +#210205 = EDGE_CURVE('',#210198,#210206,#210208,.T.); +#210206 = VERTEX_POINT('',#210207); +#210207 = CARTESIAN_POINT('',(102.892589,-75.717096,1.585)); +#210208 = CIRCLE('',#210209,0.348625649748); +#210209 = AXIS2_PLACEMENT_3D('',#210210,#210211,#210212); +#210210 = CARTESIAN_POINT('',(102.55519104586,-75.80485968387,1.585)); +#210211 = DIRECTION('',(0.,0.,-1.)); +#210212 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#210213 = ORIENTED_EDGE('',*,*,#210214,.T.); +#210214 = EDGE_CURVE('',#210206,#210215,#210217,.T.); +#210215 = VERTEX_POINT('',#210216); +#210216 = CARTESIAN_POINT('',(102.891367,-76.037252,1.585)); +#210217 = LINE('',#210218,#210219); +#210218 = CARTESIAN_POINT('',(102.892589,-75.717096,1.585)); +#210219 = VECTOR('',#210220,1.); +#210220 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#210221 = ORIENTED_EDGE('',*,*,#210222,.T.); +#210222 = EDGE_CURVE('',#210215,#210223,#210225,.T.); +#210223 = VERTEX_POINT('',#210224); +#210224 = CARTESIAN_POINT('',(102.643186,-76.281478,1.585)); +#210225 = CIRCLE('',#210226,0.348635327447); +#210226 = AXIS2_PLACEMENT_3D('',#210227,#210228,#210229); +#210227 = CARTESIAN_POINT('',(102.55541448129,-75.94407208415,1.585)); +#210228 = DIRECTION('',(0.,0.,-1.)); +#210229 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#210230 = ORIENTED_EDGE('',*,*,#210231,.T.); +#210231 = EDGE_CURVE('',#210223,#210232,#210234,.T.); +#210232 = VERTEX_POINT('',#210233); +#210233 = CARTESIAN_POINT('',(102.418268,-76.280256,1.585)); +#210234 = LINE('',#210235,#210236); +#210235 = CARTESIAN_POINT('',(102.643186,-76.281478,1.585)); +#210236 = VECTOR('',#210237,1.); +#210237 = DIRECTION('',(-0.999985241087,5.433010984541E-03,0.)); +#210238 = ORIENTED_EDGE('',*,*,#210239,.T.); +#210239 = EDGE_CURVE('',#210232,#210240,#210242,.T.); +#210240 = VERTEX_POINT('',#210241); +#210241 = CARTESIAN_POINT('',(102.388036,-76.26675,1.585)); +#210242 = LINE('',#210243,#210244); +#210243 = CARTESIAN_POINT('',(102.418268,-76.280256,1.585)); +#210244 = VECTOR('',#210245,1.); +#210245 = DIRECTION('',(-0.913030248774,0.407891854324,0.)); +#210246 = ORIENTED_EDGE('',*,*,#210247,.T.); +#210247 = EDGE_CURVE('',#210240,#210248,#210250,.T.); +#210248 = VERTEX_POINT('',#210249); +#210249 = CARTESIAN_POINT('',(102.301172,-76.270279,1.585)); +#210250 = CIRCLE('',#210251,7.226397606086E-02); +#210251 = AXIS2_PLACEMENT_3D('',#210252,#210253,#210254); +#210252 = CARTESIAN_POINT('',(102.34226059538,-76.21083314593,1.585)); +#210253 = DIRECTION('',(-0.,0.,-1.)); +#210254 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#210255 = ORIENTED_EDGE('',*,*,#210256,.T.); +#210256 = EDGE_CURVE('',#210248,#210257,#210259,.T.); +#210257 = VERTEX_POINT('',#210258); +#210258 = CARTESIAN_POINT('',(102.28048,-76.249587,1.585)); +#210259 = LINE('',#210260,#210261); +#210260 = CARTESIAN_POINT('',(102.301172,-76.270279,1.585)); +#210261 = VECTOR('',#210262,1.); +#210262 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210263 = ORIENTED_EDGE('',*,*,#210264,.T.); +#210264 = EDGE_CURVE('',#210257,#210265,#210267,.T.); +#210265 = VERTEX_POINT('',#210266); +#210266 = CARTESIAN_POINT('',(102.26784,-76.207919,1.585)); +#210267 = LINE('',#210268,#210269); +#210268 = CARTESIAN_POINT('',(102.28048,-76.249587,1.585)); +#210269 = VECTOR('',#210270,1.); +#210270 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#210271 = ORIENTED_EDGE('',*,*,#210272,.T.); +#210272 = EDGE_CURVE('',#210265,#210273,#210275,.T.); +#210273 = VERTEX_POINT('',#210274); +#210274 = CARTESIAN_POINT('',(102.269281,-75.193287,1.585)); +#210275 = LINE('',#210276,#210277); +#210276 = CARTESIAN_POINT('',(102.26784,-76.207919,1.585)); +#210277 = VECTOR('',#210278,1.); +#210278 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#210279 = ORIENTED_EDGE('',*,*,#210280,.T.); +#210280 = EDGE_CURVE('',#210273,#210281,#210283,.T.); +#210281 = VERTEX_POINT('',#210282); +#210282 = CARTESIAN_POINT('',(102.28048,-75.166251,1.585)); +#210283 = LINE('',#210284,#210285); +#210284 = CARTESIAN_POINT('',(102.269281,-75.193287,1.585)); +#210285 = VECTOR('',#210286,1.); +#210286 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#210287 = ORIENTED_EDGE('',*,*,#210288,.T.); +#210288 = EDGE_CURVE('',#210281,#210179,#210289,.T.); +#210289 = LINE('',#210290,#210291); +#210290 = CARTESIAN_POINT('',(102.28048,-75.166251,1.585)); +#210291 = VECTOR('',#210292,1.); +#210292 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#210293 = FACE_BOUND('',#210294,.F.); +#210294 = EDGE_LOOP('',(#210295,#210306,#210314,#210322,#210330,#210338, + #210346,#210355)); +#210295 = ORIENTED_EDGE('',*,*,#210296,.T.); +#210296 = EDGE_CURVE('',#210297,#210299,#210301,.T.); +#210297 = VERTEX_POINT('',#210298); +#210298 = CARTESIAN_POINT('',(102.74403,-75.749433,1.585)); +#210299 = VERTEX_POINT('',#210300); +#210300 = CARTESIAN_POINT('',(102.610849,-75.616252,1.585)); +#210301 = CIRCLE('',#210302,0.18686440374); +#210302 = AXIS2_PLACEMENT_3D('',#210303,#210304,#210305); +#210303 = CARTESIAN_POINT('',(102.563313,-75.796969,1.585)); +#210304 = DIRECTION('',(0.,0.,1.)); +#210305 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#210306 = ORIENTED_EDGE('',*,*,#210307,.T.); +#210307 = EDGE_CURVE('',#210299,#210308,#210310,.T.); +#210308 = VERTEX_POINT('',#210309); +#210309 = CARTESIAN_POINT('',(102.455783,-75.616252,1.585)); +#210310 = LINE('',#210311,#210312); +#210311 = CARTESIAN_POINT('',(102.610849,-75.616252,1.585)); +#210312 = VECTOR('',#210313,1.); +#210313 = DIRECTION('',(-1.,0.,0.)); +#210314 = ORIENTED_EDGE('',*,*,#210315,.T.); +#210315 = EDGE_CURVE('',#210308,#210316,#210318,.T.); +#210316 = VERTEX_POINT('',#210317); +#210317 = CARTESIAN_POINT('',(102.41784,-75.635223,1.585)); +#210318 = LINE('',#210319,#210320); +#210319 = CARTESIAN_POINT('',(102.455783,-75.616252,1.585)); +#210320 = VECTOR('',#210321,1.); +#210321 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#210322 = ORIENTED_EDGE('',*,*,#210323,.T.); +#210323 = EDGE_CURVE('',#210316,#210324,#210326,.T.); +#210324 = VERTEX_POINT('',#210325); +#210325 = CARTESIAN_POINT('',(102.41784,-76.113947,1.585)); +#210326 = LINE('',#210327,#210328); +#210327 = CARTESIAN_POINT('',(102.41784,-75.635223,1.585)); +#210328 = VECTOR('',#210329,1.); +#210329 = DIRECTION('',(0.,-1.,0.)); +#210330 = ORIENTED_EDGE('',*,*,#210331,.T.); +#210331 = EDGE_CURVE('',#210324,#210332,#210334,.T.); +#210332 = VERTEX_POINT('',#210333); +#210333 = CARTESIAN_POINT('',(102.455783,-76.132919,1.585)); +#210334 = LINE('',#210335,#210336); +#210335 = CARTESIAN_POINT('',(102.41784,-76.113947,1.585)); +#210336 = VECTOR('',#210337,1.); +#210337 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#210338 = ORIENTED_EDGE('',*,*,#210339,.T.); +#210339 = EDGE_CURVE('',#210332,#210340,#210342,.T.); +#210340 = VERTEX_POINT('',#210341); +#210341 = CARTESIAN_POINT('',(102.610849,-76.132919,1.585)); +#210342 = LINE('',#210343,#210344); +#210343 = CARTESIAN_POINT('',(102.455783,-76.132919,1.585)); +#210344 = VECTOR('',#210345,1.); +#210345 = DIRECTION('',(1.,0.,0.)); +#210346 = ORIENTED_EDGE('',*,*,#210347,.T.); +#210347 = EDGE_CURVE('',#210340,#210348,#210350,.T.); +#210348 = VERTEX_POINT('',#210349); +#210349 = CARTESIAN_POINT('',(102.74403,-75.999737,1.585)); +#210350 = CIRCLE('',#210351,0.186867760544); +#210351 = AXIS2_PLACEMENT_3D('',#210352,#210353,#210354); +#210352 = CARTESIAN_POINT('',(102.56330996928,-75.95219932622,1.585)); +#210353 = DIRECTION('',(0.,0.,1.)); +#210354 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#210355 = ORIENTED_EDGE('',*,*,#210356,.T.); +#210356 = EDGE_CURVE('',#210348,#210297,#210357,.T.); +#210357 = LINE('',#210358,#210359); +#210358 = CARTESIAN_POINT('',(102.74403,-75.999737,1.585)); +#210359 = VECTOR('',#210360,1.); +#210360 = DIRECTION('',(0.,1.,0.)); +#210361 = PLANE('',#210362); +#210362 = AXIS2_PLACEMENT_3D('',#210363,#210364,#210365); +#210363 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210364 = DIRECTION('',(0.,0.,1.)); +#210365 = DIRECTION('',(1.,0.,-0.)); +#210366 = SHELL_BASED_SURFACE_MODEL('',(#210367)); +#210367 = OPEN_SHELL('',(#210368)); +#210368 = ADVANCED_FACE('',(#210369,#210470),#210545,.T.); +#210369 = FACE_BOUND('',#210370,.F.); +#210370 = EDGE_LOOP('',(#210371,#210382,#210390,#210398,#210406,#210414, + #210422,#210431,#210439,#210448,#210456,#210464)); +#210371 = ORIENTED_EDGE('',*,*,#210372,.T.); +#210372 = EDGE_CURVE('',#210373,#210375,#210377,.T.); +#210373 = VERTEX_POINT('',#210374); +#210374 = CARTESIAN_POINT('',(152.51087,-75.733961,1.585)); +#210375 = VERTEX_POINT('',#210376); +#210376 = CARTESIAN_POINT('',(152.941693,-75.636552,1.585)); +#210377 = CIRCLE('',#210378,0.670538401945); +#210378 = AXIS2_PLACEMENT_3D('',#210379,#210380,#210381); +#210379 = CARTESIAN_POINT('',(152.86590657351,-76.30279382249,1.585)); +#210380 = DIRECTION('',(0.,0.,-1.)); +#210381 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#210382 = ORIENTED_EDGE('',*,*,#210383,.T.); +#210383 = EDGE_CURVE('',#210375,#210384,#210386,.T.); +#210384 = VERTEX_POINT('',#210385); +#210385 = CARTESIAN_POINT('',(153.13438,-75.684718,1.585)); +#210386 = LINE('',#210387,#210388); +#210387 = CARTESIAN_POINT('',(152.941693,-75.636552,1.585)); +#210388 = VECTOR('',#210389,1.); +#210389 = DIRECTION('',(0.970149311613,-0.242508377541,0.)); +#210390 = ORIENTED_EDGE('',*,*,#210391,.T.); +#210391 = EDGE_CURVE('',#210384,#210392,#210394,.T.); +#210392 = VERTEX_POINT('',#210393); +#210393 = CARTESIAN_POINT('',(153.236987,-75.739751,1.585)); +#210394 = LINE('',#210395,#210396); +#210395 = CARTESIAN_POINT('',(153.13438,-75.684718,1.585)); +#210396 = VECTOR('',#210397,1.); +#210397 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#210398 = ORIENTED_EDGE('',*,*,#210399,.T.); +#210399 = EDGE_CURVE('',#210392,#210400,#210402,.T.); +#210400 = VERTEX_POINT('',#210401); +#210401 = CARTESIAN_POINT('',(153.330999,-75.837884,1.585)); +#210402 = LINE('',#210403,#210404); +#210403 = CARTESIAN_POINT('',(153.236987,-75.739751,1.585)); +#210404 = VECTOR('',#210405,1.); +#210405 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#210406 = ORIENTED_EDGE('',*,*,#210407,.T.); +#210407 = EDGE_CURVE('',#210400,#210408,#210410,.T.); +#210408 = VERTEX_POINT('',#210409); +#210409 = CARTESIAN_POINT('',(153.382563,-75.989776,1.585)); +#210410 = LINE('',#210411,#210412); +#210411 = CARTESIAN_POINT('',(153.330999,-75.837884,1.585)); +#210412 = VECTOR('',#210413,1.); +#210413 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#210414 = ORIENTED_EDGE('',*,*,#210415,.T.); +#210415 = EDGE_CURVE('',#210408,#210416,#210418,.T.); +#210416 = VERTEX_POINT('',#210417); +#210417 = CARTESIAN_POINT('',(153.384597,-76.214285,1.585)); +#210418 = LINE('',#210419,#210420); +#210419 = CARTESIAN_POINT('',(153.382563,-75.989776,1.585)); +#210420 = VECTOR('',#210421,1.); +#210421 = DIRECTION('',(9.05939864485E-03,-0.999958962806,0.)); +#210422 = ORIENTED_EDGE('',*,*,#210423,.T.); +#210423 = EDGE_CURVE('',#210416,#210424,#210426,.T.); +#210424 = VERTEX_POINT('',#210425); +#210425 = CARTESIAN_POINT('',(153.319597,-76.279285,1.585)); +#210426 = CIRCLE('',#210427,6.500103935391E-02); +#210427 = AXIS2_PLACEMENT_3D('',#210428,#210429,#210430); +#210428 = CARTESIAN_POINT('',(153.31959596065,-76.21428396065,1.585)); +#210429 = DIRECTION('',(0.,0.,-1.)); +#210430 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#210431 = ORIENTED_EDGE('',*,*,#210432,.T.); +#210432 = EDGE_CURVE('',#210424,#210433,#210435,.T.); +#210433 = VERTEX_POINT('',#210434); +#210434 = CARTESIAN_POINT('',(152.419597,-76.279285,1.585)); +#210435 = LINE('',#210436,#210437); +#210436 = CARTESIAN_POINT('',(153.319597,-76.279285,1.585)); +#210437 = VECTOR('',#210438,1.); +#210438 = DIRECTION('',(-1.,0.,0.)); +#210439 = ORIENTED_EDGE('',*,*,#210440,.T.); +#210440 = EDGE_CURVE('',#210433,#210441,#210443,.T.); +#210441 = VERTEX_POINT('',#210442); +#210442 = CARTESIAN_POINT('',(152.354597,-76.214285,1.585)); +#210443 = CIRCLE('',#210444,6.500103935386E-02); +#210444 = AXIS2_PLACEMENT_3D('',#210445,#210446,#210447); +#210445 = CARTESIAN_POINT('',(152.41959803934,-76.21428396065,1.585)); +#210446 = DIRECTION('',(0.,0.,-1.)); +#210447 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#210448 = ORIENTED_EDGE('',*,*,#210449,.T.); +#210449 = EDGE_CURVE('',#210441,#210450,#210452,.T.); +#210450 = VERTEX_POINT('',#210451); +#210451 = CARTESIAN_POINT('',(152.35663,-75.989776,1.585)); +#210452 = LINE('',#210453,#210454); +#210453 = CARTESIAN_POINT('',(152.354597,-76.214285,1.585)); +#210454 = VECTOR('',#210455,1.); +#210455 = DIRECTION('',(9.05494502838E-03,0.999959003145,0.)); +#210456 = ORIENTED_EDGE('',*,*,#210457,.T.); +#210457 = EDGE_CURVE('',#210450,#210458,#210460,.T.); +#210458 = VERTEX_POINT('',#210459); +#210459 = CARTESIAN_POINT('',(152.408191,-75.837888,1.585)); +#210460 = LINE('',#210461,#210462); +#210461 = CARTESIAN_POINT('',(152.35663,-75.989776,1.585)); +#210462 = VECTOR('',#210463,1.); +#210463 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#210464 = ORIENTED_EDGE('',*,*,#210465,.T.); +#210465 = EDGE_CURVE('',#210458,#210373,#210466,.T.); +#210466 = LINE('',#210467,#210468); +#210467 = CARTESIAN_POINT('',(152.408191,-75.837888,1.585)); +#210468 = VECTOR('',#210469,1.); +#210469 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#210470 = FACE_BOUND('',#210471,.F.); +#210471 = EDGE_LOOP('',(#210472,#210483,#210491,#210499,#210507,#210515, + #210523,#210531,#210539)); +#210472 = ORIENTED_EDGE('',*,*,#210473,.T.); +#210473 = EDGE_CURVE('',#210474,#210476,#210478,.T.); +#210474 = VERTEX_POINT('',#210475); +#210475 = CARTESIAN_POINT('',(153.082622,-75.804184,1.585)); +#210476 = VERTEX_POINT('',#210477); +#210477 = CARTESIAN_POINT('',(152.586669,-75.839134,1.585)); +#210478 = CIRCLE('',#210479,0.559258743581); +#210479 = AXIS2_PLACEMENT_3D('',#210480,#210481,#210482); +#210480 = CARTESIAN_POINT('',(152.86986183298,-76.32139136035,1.585)); +#210481 = DIRECTION('',(0.,0.,1.)); +#210482 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#210483 = ORIENTED_EDGE('',*,*,#210484,.T.); +#210484 = EDGE_CURVE('',#210476,#210485,#210487,.T.); +#210485 = VERTEX_POINT('',#210486); +#210486 = CARTESIAN_POINT('',(152.519265,-75.90654,1.585)); +#210487 = LINE('',#210488,#210489); +#210488 = CARTESIAN_POINT('',(152.586669,-75.839134,1.585)); +#210489 = VECTOR('',#210490,1.); +#210490 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#210491 = ORIENTED_EDGE('',*,*,#210492,.T.); +#210492 = EDGE_CURVE('',#210485,#210493,#210495,.T.); +#210493 = VERTEX_POINT('',#210494); +#210494 = CARTESIAN_POINT('',(152.484597,-76.010546,1.585)); +#210495 = LINE('',#210496,#210497); +#210496 = CARTESIAN_POINT('',(152.519265,-75.90654,1.585)); +#210497 = VECTOR('',#210498,1.); +#210498 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#210499 = ORIENTED_EDGE('',*,*,#210500,.T.); +#210500 = EDGE_CURVE('',#210493,#210501,#210503,.T.); +#210501 = VERTEX_POINT('',#210502); +#210502 = CARTESIAN_POINT('',(152.484597,-76.149285,1.585)); +#210503 = LINE('',#210504,#210505); +#210504 = CARTESIAN_POINT('',(152.484597,-76.010546,1.585)); +#210505 = VECTOR('',#210506,1.); +#210506 = DIRECTION('',(0.,-1.,0.)); +#210507 = ORIENTED_EDGE('',*,*,#210508,.T.); +#210508 = EDGE_CURVE('',#210501,#210509,#210511,.T.); +#210509 = VERTEX_POINT('',#210510); +#210510 = CARTESIAN_POINT('',(153.254597,-76.149285,1.585)); +#210511 = LINE('',#210512,#210513); +#210512 = CARTESIAN_POINT('',(152.484597,-76.149285,1.585)); +#210513 = VECTOR('',#210514,1.); +#210514 = DIRECTION('',(1.,0.,0.)); +#210515 = ORIENTED_EDGE('',*,*,#210516,.T.); +#210516 = EDGE_CURVE('',#210509,#210517,#210519,.T.); +#210517 = VERTEX_POINT('',#210518); +#210518 = CARTESIAN_POINT('',(153.254597,-76.010546,1.585)); +#210519 = LINE('',#210520,#210521); +#210520 = CARTESIAN_POINT('',(153.254597,-76.149285,1.585)); +#210521 = VECTOR('',#210522,1.); +#210522 = DIRECTION('',(0.,1.,0.)); +#210523 = ORIENTED_EDGE('',*,*,#210524,.T.); +#210524 = EDGE_CURVE('',#210517,#210525,#210527,.T.); +#210525 = VERTEX_POINT('',#210526); +#210526 = CARTESIAN_POINT('',(153.219928,-75.90654,1.585)); +#210527 = LINE('',#210528,#210529); +#210528 = CARTESIAN_POINT('',(153.254597,-76.010546,1.585)); +#210529 = VECTOR('',#210530,1.); +#210530 = DIRECTION('',(-0.316230502441,0.948682385905,0.)); +#210531 = ORIENTED_EDGE('',*,*,#210532,.T.); +#210532 = EDGE_CURVE('',#210525,#210533,#210535,.T.); +#210533 = VERTEX_POINT('',#210534); +#210534 = CARTESIAN_POINT('',(153.152522,-75.839134,1.585)); +#210535 = LINE('',#210536,#210537); +#210536 = CARTESIAN_POINT('',(153.219928,-75.90654,1.585)); +#210537 = VECTOR('',#210538,1.); +#210538 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210539 = ORIENTED_EDGE('',*,*,#210540,.T.); +#210540 = EDGE_CURVE('',#210533,#210474,#210541,.T.); +#210541 = LINE('',#210542,#210543); +#210542 = CARTESIAN_POINT('',(153.152522,-75.839134,1.585)); +#210543 = VECTOR('',#210544,1.); +#210544 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#210545 = PLANE('',#210546); +#210546 = AXIS2_PLACEMENT_3D('',#210547,#210548,#210549); +#210547 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210548 = DIRECTION('',(0.,0.,1.)); +#210549 = DIRECTION('',(1.,0.,-0.)); +#210550 = SHELL_BASED_SURFACE_MODEL('',(#210551)); +#210551 = OPEN_SHELL('',(#210552)); +#210552 = ADVANCED_FACE('',(#210553),#210622,.T.); +#210553 = FACE_BOUND('',#210554,.F.); +#210554 = EDGE_LOOP('',(#210555,#210566,#210574,#210583,#210591,#210600, + #210608,#210616)); +#210555 = ORIENTED_EDGE('',*,*,#210556,.T.); +#210556 = EDGE_CURVE('',#210557,#210559,#210561,.T.); +#210557 = VERTEX_POINT('',#210558); +#210558 = CARTESIAN_POINT('',(140.559545,-75.717982,1.585)); +#210559 = VERTEX_POINT('',#210560); +#210560 = CARTESIAN_POINT('',(140.684597,-75.742856,1.585)); +#210561 = CIRCLE('',#210562,6.499988811647E-02); +#210562 = AXIS2_PLACEMENT_3D('',#210563,#210564,#210565); +#210563 = CARTESIAN_POINT('',(140.61959711188,-75.7428562701,1.585)); +#210564 = DIRECTION('',(0.,0.,-1.)); +#210565 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#210566 = ORIENTED_EDGE('',*,*,#210567,.T.); +#210567 = EDGE_CURVE('',#210559,#210568,#210570,.T.); +#210568 = VERTEX_POINT('',#210569); +#210569 = CARTESIAN_POINT('',(140.684597,-76.171428,1.585)); +#210570 = LINE('',#210571,#210572); +#210571 = CARTESIAN_POINT('',(140.684597,-75.742856,1.585)); +#210572 = VECTOR('',#210573,1.); +#210573 = DIRECTION('',(0.,-1.,0.)); +#210574 = ORIENTED_EDGE('',*,*,#210575,.T.); +#210575 = EDGE_CURVE('',#210568,#210576,#210578,.T.); +#210576 = VERTEX_POINT('',#210577); +#210577 = CARTESIAN_POINT('',(140.619597,-76.236428,1.585)); +#210578 = CIRCLE('',#210579,6.500103935382E-02); +#210579 = AXIS2_PLACEMENT_3D('',#210580,#210581,#210582); +#210580 = CARTESIAN_POINT('',(140.61959596065,-76.17142696065,1.585)); +#210581 = DIRECTION('',(0.,0.,-1.)); +#210582 = DIRECTION('',(0.999999999872,-1.598967561772E-05,0.)); +#210583 = ORIENTED_EDGE('',*,*,#210584,.T.); +#210584 = EDGE_CURVE('',#210576,#210585,#210587,.T.); +#210585 = VERTEX_POINT('',#210586); +#210586 = CARTESIAN_POINT('',(139.719597,-76.236428,1.585)); +#210587 = LINE('',#210588,#210589); +#210588 = CARTESIAN_POINT('',(140.619597,-76.236428,1.585)); +#210589 = VECTOR('',#210590,1.); +#210590 = DIRECTION('',(-1.,0.,0.)); +#210591 = ORIENTED_EDGE('',*,*,#210592,.T.); +#210592 = EDGE_CURVE('',#210585,#210593,#210595,.T.); +#210593 = VERTEX_POINT('',#210594); +#210594 = CARTESIAN_POINT('',(139.719597,-76.106428,1.585)); +#210595 = CIRCLE('',#210596,6.500000000092E-02); +#210596 = AXIS2_PLACEMENT_3D('',#210597,#210598,#210599); +#210597 = CARTESIAN_POINT('',(139.71959734486,-76.171428,1.585)); +#210598 = DIRECTION('',(0.,0.,-1.)); +#210599 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#210600 = ORIENTED_EDGE('',*,*,#210601,.T.); +#210601 = EDGE_CURVE('',#210593,#210602,#210604,.T.); +#210602 = VERTEX_POINT('',#210603); +#210603 = CARTESIAN_POINT('',(140.554597,-76.106428,1.585)); +#210604 = LINE('',#210605,#210606); +#210605 = CARTESIAN_POINT('',(139.719597,-76.106428,1.585)); +#210606 = VECTOR('',#210607,1.); +#210607 = DIRECTION('',(1.,0.,0.)); +#210608 = ORIENTED_EDGE('',*,*,#210609,.T.); +#210609 = EDGE_CURVE('',#210602,#210610,#210612,.T.); +#210610 = VERTEX_POINT('',#210611); +#210611 = CARTESIAN_POINT('',(140.554597,-75.742856,1.585)); +#210612 = LINE('',#210613,#210614); +#210613 = CARTESIAN_POINT('',(140.554597,-76.106428,1.585)); +#210614 = VECTOR('',#210615,1.); +#210615 = DIRECTION('',(0.,1.,0.)); +#210616 = ORIENTED_EDGE('',*,*,#210617,.T.); +#210617 = EDGE_CURVE('',#210610,#210557,#210618,.T.); +#210618 = LINE('',#210619,#210620); +#210619 = CARTESIAN_POINT('',(140.554597,-75.742856,1.585)); +#210620 = VECTOR('',#210621,1.); +#210621 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#210622 = PLANE('',#210623); +#210623 = AXIS2_PLACEMENT_3D('',#210624,#210625,#210626); +#210624 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210625 = DIRECTION('',(0.,0.,1.)); +#210626 = DIRECTION('',(1.,0.,-0.)); +#210627 = SHELL_BASED_SURFACE_MODEL('',(#210628)); +#210628 = OPEN_SHELL('',(#210629)); +#210629 = ADVANCED_FACE('',(#210630,#210700),#210734,.T.); +#210630 = FACE_BOUND('',#210631,.F.); +#210631 = EDGE_LOOP('',(#210632,#210643,#210651,#210660,#210668,#210677, + #210685,#210694)); +#210632 = ORIENTED_EDGE('',*,*,#210633,.T.); +#210633 = EDGE_CURVE('',#210634,#210636,#210638,.T.); +#210634 = VERTEX_POINT('',#210635); +#210635 = CARTESIAN_POINT('',(108.40165,-72.7731,1.585)); +#210636 = VERTEX_POINT('',#210637); +#210637 = CARTESIAN_POINT('',(108.46165,-72.7131,1.585)); +#210638 = CIRCLE('',#210639,5.999932016259E-02); +#210639 = AXIS2_PLACEMENT_3D('',#210640,#210641,#210642); +#210640 = CARTESIAN_POINT('',(108.46164932015,-72.77309932015,1.585)); +#210641 = DIRECTION('',(0.,0.,-1.)); +#210642 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#210643 = ORIENTED_EDGE('',*,*,#210644,.T.); +#210644 = EDGE_CURVE('',#210636,#210645,#210647,.T.); +#210645 = VERTEX_POINT('',#210646); +#210646 = CARTESIAN_POINT('',(156.78165,-72.7131,1.585)); +#210647 = LINE('',#210648,#210649); +#210648 = CARTESIAN_POINT('',(108.46165,-72.7131,1.585)); +#210649 = VECTOR('',#210650,1.); +#210650 = DIRECTION('',(1.,0.,0.)); +#210651 = ORIENTED_EDGE('',*,*,#210652,.T.); +#210652 = EDGE_CURVE('',#210645,#210653,#210655,.T.); +#210653 = VERTEX_POINT('',#210654); +#210654 = CARTESIAN_POINT('',(156.84165,-72.7731,1.585)); +#210655 = CIRCLE('',#210656,5.99993201626E-02); +#210656 = AXIS2_PLACEMENT_3D('',#210657,#210658,#210659); +#210657 = CARTESIAN_POINT('',(156.78165067984,-72.77309932015,1.585)); +#210658 = DIRECTION('',(0.,0.,-1.)); +#210659 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#210660 = ORIENTED_EDGE('',*,*,#210661,.T.); +#210661 = EDGE_CURVE('',#210653,#210662,#210664,.T.); +#210662 = VERTEX_POINT('',#210663); +#210663 = CARTESIAN_POINT('',(156.84165,-75.4331,1.585)); +#210664 = LINE('',#210665,#210666); +#210665 = CARTESIAN_POINT('',(156.84165,-72.7731,1.585)); +#210666 = VECTOR('',#210667,1.); +#210667 = DIRECTION('',(0.,-1.,0.)); +#210668 = ORIENTED_EDGE('',*,*,#210669,.T.); +#210669 = EDGE_CURVE('',#210662,#210670,#210672,.T.); +#210670 = VERTEX_POINT('',#210671); +#210671 = CARTESIAN_POINT('',(156.78165,-75.4931,1.585)); +#210672 = CIRCLE('',#210673,5.999932016253E-02); +#210673 = AXIS2_PLACEMENT_3D('',#210674,#210675,#210676); +#210674 = CARTESIAN_POINT('',(156.78165067984,-75.43310067984,1.585)); +#210675 = DIRECTION('',(0.,0.,-1.)); +#210676 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#210677 = ORIENTED_EDGE('',*,*,#210678,.T.); +#210678 = EDGE_CURVE('',#210670,#210679,#210681,.T.); +#210679 = VERTEX_POINT('',#210680); +#210680 = CARTESIAN_POINT('',(108.46165,-75.4931,1.585)); +#210681 = LINE('',#210682,#210683); +#210682 = CARTESIAN_POINT('',(156.78165,-75.4931,1.585)); +#210683 = VECTOR('',#210684,1.); +#210684 = DIRECTION('',(-1.,0.,0.)); +#210685 = ORIENTED_EDGE('',*,*,#210686,.T.); +#210686 = EDGE_CURVE('',#210679,#210687,#210689,.T.); +#210687 = VERTEX_POINT('',#210688); +#210688 = CARTESIAN_POINT('',(108.40165,-75.4331,1.585)); +#210689 = CIRCLE('',#210690,5.999932016258E-02); +#210690 = AXIS2_PLACEMENT_3D('',#210691,#210692,#210693); +#210691 = CARTESIAN_POINT('',(108.46164932015,-75.43310067984,1.585)); +#210692 = DIRECTION('',(0.,0.,-1.)); +#210693 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#210694 = ORIENTED_EDGE('',*,*,#210695,.T.); +#210695 = EDGE_CURVE('',#210687,#210634,#210696,.T.); +#210696 = LINE('',#210697,#210698); +#210697 = CARTESIAN_POINT('',(108.40165,-75.4331,1.585)); +#210698 = VECTOR('',#210699,1.); +#210699 = DIRECTION('',(0.,1.,0.)); +#210700 = FACE_BOUND('',#210701,.F.); +#210701 = EDGE_LOOP('',(#210702,#210712,#210720,#210728)); +#210702 = ORIENTED_EDGE('',*,*,#210703,.T.); +#210703 = EDGE_CURVE('',#210704,#210706,#210708,.T.); +#210704 = VERTEX_POINT('',#210705); +#210705 = CARTESIAN_POINT('',(156.72165,-75.3731,1.585)); +#210706 = VERTEX_POINT('',#210707); +#210707 = CARTESIAN_POINT('',(156.72165,-72.8331,1.585)); +#210708 = LINE('',#210709,#210710); +#210709 = CARTESIAN_POINT('',(156.72165,-75.3731,1.585)); +#210710 = VECTOR('',#210711,1.); +#210711 = DIRECTION('',(0.,1.,0.)); +#210712 = ORIENTED_EDGE('',*,*,#210713,.T.); +#210713 = EDGE_CURVE('',#210706,#210714,#210716,.T.); +#210714 = VERTEX_POINT('',#210715); +#210715 = CARTESIAN_POINT('',(108.52165,-72.8331,1.585)); +#210716 = LINE('',#210717,#210718); +#210717 = CARTESIAN_POINT('',(156.72165,-72.8331,1.585)); +#210718 = VECTOR('',#210719,1.); +#210719 = DIRECTION('',(-1.,0.,0.)); +#210720 = ORIENTED_EDGE('',*,*,#210721,.T.); +#210721 = EDGE_CURVE('',#210714,#210722,#210724,.T.); +#210722 = VERTEX_POINT('',#210723); +#210723 = CARTESIAN_POINT('',(108.52165,-75.3731,1.585)); +#210724 = LINE('',#210725,#210726); +#210725 = CARTESIAN_POINT('',(108.52165,-72.8331,1.585)); +#210726 = VECTOR('',#210727,1.); +#210727 = DIRECTION('',(0.,-1.,0.)); +#210728 = ORIENTED_EDGE('',*,*,#210729,.T.); +#210729 = EDGE_CURVE('',#210722,#210704,#210730,.T.); +#210730 = LINE('',#210731,#210732); +#210731 = CARTESIAN_POINT('',(108.52165,-75.3731,1.585)); +#210732 = VECTOR('',#210733,1.); +#210733 = DIRECTION('',(1.,0.,0.)); +#210734 = PLANE('',#210735); +#210735 = AXIS2_PLACEMENT_3D('',#210736,#210737,#210738); +#210736 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210737 = DIRECTION('',(0.,0.,1.)); +#210738 = DIRECTION('',(1.,0.,-0.)); +#210739 = SHELL_BASED_SURFACE_MODEL('',(#210740)); +#210740 = OPEN_SHELL('',(#210741)); +#210741 = ADVANCED_FACE('',(#210742),#210812,.T.); +#210742 = FACE_BOUND('',#210743,.F.); +#210743 = EDGE_LOOP('',(#210744,#210755,#210763,#210772,#210780,#210789, + #210797,#210806)); +#210744 = ORIENTED_EDGE('',*,*,#210745,.T.); +#210745 = EDGE_CURVE('',#210746,#210748,#210750,.T.); +#210746 = VERTEX_POINT('',#210747); +#210747 = CARTESIAN_POINT('',(100.92022,-75.145559,1.585)); +#210748 = VERTEX_POINT('',#210749); +#210749 = CARTESIAN_POINT('',(101.003556,-75.145559,1.585)); +#210750 = CIRCLE('',#210751,7.499882881843E-02); +#210751 = AXIS2_PLACEMENT_3D('',#210752,#210753,#210754); +#210752 = CARTESIAN_POINT('',(100.961888,-75.20791765697,1.585)); +#210753 = DIRECTION('',(0.,0.,-1.)); +#210754 = DIRECTION('',(-0.555582009165,0.831461743613,0.)); +#210755 = ORIENTED_EDGE('',*,*,#210756,.T.); +#210756 = EDGE_CURVE('',#210748,#210757,#210759,.T.); +#210757 = VERTEX_POINT('',#210758); +#210758 = CARTESIAN_POINT('',(101.071867,-75.21387,1.585)); +#210759 = LINE('',#210760,#210761); +#210760 = CARTESIAN_POINT('',(101.003556,-75.145559,1.585)); +#210761 = VECTOR('',#210762,1.); +#210762 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#210763 = ORIENTED_EDGE('',*,*,#210764,.T.); +#210764 = EDGE_CURVE('',#210757,#210765,#210767,.T.); +#210765 = VERTEX_POINT('',#210766); +#210766 = CARTESIAN_POINT('',(101.06254,-75.308571,1.585)); +#210767 = CIRCLE('',#210768,7.499999203861E-02); +#210768 = AXIS2_PLACEMENT_3D('',#210769,#210770,#210771); +#210769 = CARTESIAN_POINT('',(101.00950696407,-75.25553803,1.585)); +#210770 = DIRECTION('',(0.,0.,-1.)); +#210771 = DIRECTION('',(0.831467233969,0.555573792431,0.)); +#210772 = ORIENTED_EDGE('',*,*,#210773,.T.); +#210773 = EDGE_CURVE('',#210765,#210774,#210776,.T.); +#210774 = VERTEX_POINT('',#210775); +#210775 = CARTESIAN_POINT('',(101.003556,-75.365517,1.585)); +#210776 = LINE('',#210777,#210778); +#210777 = CARTESIAN_POINT('',(101.06254,-75.308571,1.585)); +#210778 = VECTOR('',#210779,1.); +#210779 = DIRECTION('',(-0.71942625942,-0.694568828308,0.)); +#210780 = ORIENTED_EDGE('',*,*,#210781,.T.); +#210781 = EDGE_CURVE('',#210774,#210782,#210784,.T.); +#210782 = VERTEX_POINT('',#210783); +#210783 = CARTESIAN_POINT('',(100.908855,-75.35619,1.585)); +#210784 = CIRCLE('',#210785,7.499999203859E-02); +#210785 = AXIS2_PLACEMENT_3D('',#210786,#210787,#210788); +#210786 = CARTESIAN_POINT('',(100.96188796999,-75.30315696407,1.585)); +#210787 = DIRECTION('',(-0.,0.,-1.)); +#210788 = DIRECTION('',(0.555573792431,-0.831467233969,-0.)); +#210789 = ORIENTED_EDGE('',*,*,#210790,.T.); +#210790 = EDGE_CURVE('',#210782,#210791,#210793,.T.); +#210791 = VERTEX_POINT('',#210792); +#210792 = CARTESIAN_POINT('',(100.851909,-75.297206,1.585)); +#210793 = LINE('',#210794,#210795); +#210794 = CARTESIAN_POINT('',(100.908855,-75.35619,1.585)); +#210795 = VECTOR('',#210796,1.); +#210796 = DIRECTION('',(-0.694568828308,0.71942625942,0.)); +#210797 = ORIENTED_EDGE('',*,*,#210798,.T.); +#210798 = EDGE_CURVE('',#210791,#210799,#210801,.T.); +#210799 = VERTEX_POINT('',#210800); +#210800 = CARTESIAN_POINT('',(100.861236,-75.202505,1.585)); +#210801 = CIRCLE('',#210802,7.499999203861E-02); +#210802 = AXIS2_PLACEMENT_3D('',#210803,#210804,#210805); +#210803 = CARTESIAN_POINT('',(100.91426903592,-75.25553796999,1.585)); +#210804 = DIRECTION('',(0.,0.,-1.)); +#210805 = DIRECTION('',(-0.831467233969,-0.555573792431,-0.)); +#210806 = ORIENTED_EDGE('',*,*,#210807,.T.); +#210807 = EDGE_CURVE('',#210799,#210746,#210808,.T.); +#210808 = LINE('',#210809,#210810); +#210809 = CARTESIAN_POINT('',(100.861236,-75.202505,1.585)); +#210810 = VECTOR('',#210811,1.); +#210811 = DIRECTION('',(0.71942625942,0.694568828308,0.)); +#210812 = PLANE('',#210813); +#210813 = AXIS2_PLACEMENT_3D('',#210814,#210815,#210816); +#210814 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210815 = DIRECTION('',(0.,0.,1.)); +#210816 = DIRECTION('',(1.,0.,-0.)); +#210817 = SHELL_BASED_SURFACE_MODEL('',(#210818)); +#210818 = OPEN_SHELL('',(#210819)); +#210819 = ADVANCED_FACE('',(#210820),#210881,.T.); +#210820 = FACE_BOUND('',#210821,.F.); +#210821 = EDGE_LOOP('',(#210822,#210833,#210841,#210850,#210858,#210867, + #210875)); +#210822 = ORIENTED_EDGE('',*,*,#210823,.T.); +#210823 = EDGE_CURVE('',#210824,#210826,#210828,.T.); +#210824 = VERTEX_POINT('',#210825); +#210825 = CARTESIAN_POINT('',(171.538335,-74.309042,1.585)); +#210826 = VERTEX_POINT('',#210827); +#210827 = CARTESIAN_POINT('',(171.661664,-74.350152,1.585)); +#210828 = CIRCLE('',#210829,6.500014296397E-02); +#210829 = AXIS2_PLACEMENT_3D('',#210830,#210831,#210832); +#210830 = CARTESIAN_POINT('',(171.59999940669,-74.32959727991,1.585)); +#210831 = DIRECTION('',(0.,0.,-1.)); +#210832 = DIRECTION('',(-0.948681093355,0.316234380027,0.)); +#210833 = ORIENTED_EDGE('',*,*,#210834,.T.); +#210834 = EDGE_CURVE('',#210826,#210835,#210837,.T.); +#210835 = VERTEX_POINT('',#210836); +#210836 = CARTESIAN_POINT('',(171.361664,-75.250152,1.585)); +#210837 = LINE('',#210838,#210839); +#210838 = CARTESIAN_POINT('',(171.661664,-74.350152,1.585)); +#210839 = VECTOR('',#210840,1.); +#210840 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#210841 = ORIENTED_EDGE('',*,*,#210842,.T.); +#210842 = EDGE_CURVE('',#210835,#210843,#210845,.T.); +#210843 = VERTEX_POINT('',#210844); +#210844 = CARTESIAN_POINT('',(171.238335,-75.250152,1.585)); +#210845 = CIRCLE('',#210846,6.500043802861E-02); +#210846 = AXIS2_PLACEMENT_3D('',#210847,#210848,#210849); +#210847 = CARTESIAN_POINT('',(171.2999995,-75.22959606694,1.585)); +#210848 = DIRECTION('',(-0.,0.,-1.)); +#210849 = DIRECTION('',(0.948678222335,-0.316242992755,-0.)); +#210850 = ORIENTED_EDGE('',*,*,#210851,.T.); +#210851 = EDGE_CURVE('',#210843,#210852,#210854,.T.); +#210852 = VERTEX_POINT('',#210853); +#210853 = CARTESIAN_POINT('',(170.938336,-74.350152,1.585)); +#210854 = LINE('',#210855,#210856); +#210855 = CARTESIAN_POINT('',(171.238335,-75.250152,1.585)); +#210856 = VECTOR('',#210857,1.); +#210857 = DIRECTION('',(-0.316226817333,0.948683614278,0.)); +#210858 = ORIENTED_EDGE('',*,*,#210859,.T.); +#210859 = EDGE_CURVE('',#210852,#210860,#210862,.T.); +#210860 = VERTEX_POINT('',#210861); +#210861 = CARTESIAN_POINT('',(171.061664,-74.309042,1.585)); +#210862 = CIRCLE('',#210863,6.499966862239E-02); +#210863 = AXIS2_PLACEMENT_3D('',#210864,#210865,#210866); +#210864 = CARTESIAN_POINT('',(171.00000004307,-74.32959712923,1.585)); +#210865 = DIRECTION('',(0.,0.,-1.)); +#210866 = DIRECTION('',(-0.948682422317,-0.316230393205,-0.)); +#210867 = ORIENTED_EDGE('',*,*,#210868,.T.); +#210868 = EDGE_CURVE('',#210860,#210869,#210871,.T.); +#210869 = VERTEX_POINT('',#210870); +#210870 = CARTESIAN_POINT('',(171.299999,-75.024049,1.585)); +#210871 = LINE('',#210872,#210873); +#210872 = CARTESIAN_POINT('',(171.061664,-74.309042,1.585)); +#210873 = VECTOR('',#210874,1.); +#210874 = DIRECTION('',(0.316226969926,-0.948683563414,0.)); +#210875 = ORIENTED_EDGE('',*,*,#210876,.T.); +#210876 = EDGE_CURVE('',#210869,#210824,#210877,.T.); +#210877 = LINE('',#210878,#210879); +#210878 = CARTESIAN_POINT('',(171.299999,-75.024049,1.585)); +#210879 = VECTOR('',#210880,1.); +#210880 = DIRECTION('',(0.316228164062,0.948683165369,0.)); +#210881 = PLANE('',#210882); +#210882 = AXIS2_PLACEMENT_3D('',#210883,#210884,#210885); +#210883 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210884 = DIRECTION('',(0.,0.,1.)); +#210885 = DIRECTION('',(1.,0.,-0.)); +#210886 = SHELL_BASED_SURFACE_MODEL('',(#210887)); +#210887 = OPEN_SHELL('',(#210888)); +#210888 = ADVANCED_FACE('',(#210889),#211022,.T.); +#210889 = FACE_BOUND('',#210890,.F.); +#210890 = EDGE_LOOP('',(#210891,#210902,#210910,#210918,#210926,#210934, + #210943,#210951,#210960,#210968,#210976,#210984,#210992,#211000, + #211008,#211016)); +#210891 = ORIENTED_EDGE('',*,*,#210892,.T.); +#210892 = EDGE_CURVE('',#210893,#210895,#210897,.T.); +#210893 = VERTEX_POINT('',#210894); +#210894 = CARTESIAN_POINT('',(86.226217,-72.860139,1.585)); +#210895 = VERTEX_POINT('',#210896); +#210896 = CARTESIAN_POINT('',(86.34165,-72.8831,1.585)); +#210897 = CIRCLE('',#210898,6.000007318647E-02); +#210898 = AXIS2_PLACEMENT_3D('',#210899,#210900,#210901); +#210899 = CARTESIAN_POINT('',(86.281649926814,-72.88309982331,1.585)); +#210900 = DIRECTION('',(0.,0.,-1.)); +#210901 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#210902 = ORIENTED_EDGE('',*,*,#210903,.T.); +#210903 = EDGE_CURVE('',#210895,#210904,#210906,.T.); +#210904 = VERTEX_POINT('',#210905); +#210905 = CARTESIAN_POINT('',(86.34165,-74.14381,1.585)); +#210906 = LINE('',#210907,#210908); +#210907 = CARTESIAN_POINT('',(86.34165,-72.8831,1.585)); +#210908 = VECTOR('',#210909,1.); +#210909 = DIRECTION('',(0.,-1.,0.)); +#210910 = ORIENTED_EDGE('',*,*,#210911,.T.); +#210911 = EDGE_CURVE('',#210904,#210912,#210914,.T.); +#210912 = VERTEX_POINT('',#210913); +#210913 = CARTESIAN_POINT('',(87.37094,-75.1731,1.585)); +#210914 = LINE('',#210915,#210916); +#210915 = CARTESIAN_POINT('',(86.34165,-74.14381,1.585)); +#210916 = VECTOR('',#210917,1.); +#210917 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#210918 = ORIENTED_EDGE('',*,*,#210919,.T.); +#210919 = EDGE_CURVE('',#210912,#210920,#210922,.T.); +#210920 = VERTEX_POINT('',#210921); +#210921 = CARTESIAN_POINT('',(93.04165,-75.1731,1.585)); +#210922 = LINE('',#210923,#210924); +#210923 = CARTESIAN_POINT('',(87.37094,-75.1731,1.585)); +#210924 = VECTOR('',#210925,1.); +#210925 = DIRECTION('',(1.,0.,0.)); +#210926 = ORIENTED_EDGE('',*,*,#210927,.T.); +#210927 = EDGE_CURVE('',#210920,#210928,#210930,.T.); +#210928 = VERTEX_POINT('',#210929); +#210929 = CARTESIAN_POINT('',(93.04165,-72.8831,1.585)); +#210930 = LINE('',#210931,#210932); +#210931 = CARTESIAN_POINT('',(93.04165,-75.1731,1.585)); +#210932 = VECTOR('',#210933,1.); +#210933 = DIRECTION('',(0.,1.,0.)); +#210934 = ORIENTED_EDGE('',*,*,#210935,.T.); +#210935 = EDGE_CURVE('',#210928,#210936,#210938,.T.); +#210936 = VERTEX_POINT('',#210937); +#210937 = CARTESIAN_POINT('',(93.16165,-72.8831,1.585)); +#210938 = CIRCLE('',#210939,6.000000000042E-02); +#210939 = AXIS2_PLACEMENT_3D('',#210940,#210941,#210942); +#210940 = CARTESIAN_POINT('',(93.10165,-72.88309977441,1.585)); +#210941 = DIRECTION('',(0.,0.,-1.)); +#210942 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#210943 = ORIENTED_EDGE('',*,*,#210944,.T.); +#210944 = EDGE_CURVE('',#210936,#210945,#210947,.T.); +#210945 = VERTEX_POINT('',#210946); +#210946 = CARTESIAN_POINT('',(93.16165,-75.2331,1.585)); +#210947 = LINE('',#210948,#210949); +#210948 = CARTESIAN_POINT('',(93.16165,-72.8831,1.585)); +#210949 = VECTOR('',#210950,1.); +#210950 = DIRECTION('',(0.,-1.,0.)); +#210951 = ORIENTED_EDGE('',*,*,#210952,.T.); +#210952 = EDGE_CURVE('',#210945,#210953,#210955,.T.); +#210953 = VERTEX_POINT('',#210954); +#210954 = CARTESIAN_POINT('',(93.10165,-75.2931,1.585)); +#210955 = CIRCLE('',#210956,5.999932016258E-02); +#210956 = AXIS2_PLACEMENT_3D('',#210957,#210958,#210959); +#210957 = CARTESIAN_POINT('',(93.101650679841,-75.23310067984,1.585)); +#210958 = DIRECTION('',(0.,0.,-1.)); +#210959 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#210960 = ORIENTED_EDGE('',*,*,#210961,.T.); +#210961 = EDGE_CURVE('',#210953,#210962,#210964,.T.); +#210962 = VERTEX_POINT('',#210963); +#210963 = CARTESIAN_POINT('',(87.346087,-75.2931,1.585)); +#210964 = LINE('',#210965,#210966); +#210965 = CARTESIAN_POINT('',(93.10165,-75.2931,1.585)); +#210966 = VECTOR('',#210967,1.); +#210967 = DIRECTION('',(-1.,0.,0.)); +#210968 = ORIENTED_EDGE('',*,*,#210969,.T.); +#210969 = EDGE_CURVE('',#210962,#210970,#210972,.T.); +#210970 = VERTEX_POINT('',#210971); +#210971 = CARTESIAN_POINT('',(87.323126,-75.288533,1.585)); +#210972 = LINE('',#210973,#210974); +#210973 = CARTESIAN_POINT('',(87.346087,-75.2931,1.585)); +#210974 = VECTOR('',#210975,1.); +#210975 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#210976 = ORIENTED_EDGE('',*,*,#210977,.T.); +#210977 = EDGE_CURVE('',#210970,#210978,#210980,.T.); +#210978 = VERTEX_POINT('',#210979); +#210979 = CARTESIAN_POINT('',(87.30366,-75.275526,1.585)); +#210980 = LINE('',#210981,#210982); +#210981 = CARTESIAN_POINT('',(87.323126,-75.288533,1.585)); +#210982 = VECTOR('',#210983,1.); +#210983 = DIRECTION('',(-0.831464982668,0.555577161695,0.)); +#210984 = ORIENTED_EDGE('',*,*,#210985,.T.); +#210985 = EDGE_CURVE('',#210978,#210986,#210988,.T.); +#210986 = VERTEX_POINT('',#210987); +#210987 = CARTESIAN_POINT('',(86.239224,-74.211089,1.585)); +#210988 = LINE('',#210989,#210990); +#210989 = CARTESIAN_POINT('',(87.30366,-75.275526,1.585)); +#210990 = VECTOR('',#210991,1.); +#210991 = DIRECTION('',(-0.707106449036,0.707107113337,0.)); +#210992 = ORIENTED_EDGE('',*,*,#210993,.T.); +#210993 = EDGE_CURVE('',#210986,#210994,#210996,.T.); +#210994 = VERTEX_POINT('',#210995); +#210995 = CARTESIAN_POINT('',(86.226217,-74.191624,1.585)); +#210996 = LINE('',#210997,#210998); +#210997 = CARTESIAN_POINT('',(86.239224,-74.211089,1.585)); +#210998 = VECTOR('',#210999,1.); +#210999 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#211000 = ORIENTED_EDGE('',*,*,#211001,.T.); +#211001 = EDGE_CURVE('',#210994,#211002,#211004,.T.); +#211002 = VERTEX_POINT('',#211003); +#211003 = CARTESIAN_POINT('',(86.22165,-74.168663,1.585)); +#211004 = LINE('',#211005,#211006); +#211005 = CARTESIAN_POINT('',(86.226217,-74.191624,1.585)); +#211006 = VECTOR('',#211007,1.); +#211007 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#211008 = ORIENTED_EDGE('',*,*,#211009,.T.); +#211009 = EDGE_CURVE('',#211002,#211010,#211012,.T.); +#211010 = VERTEX_POINT('',#211011); +#211011 = CARTESIAN_POINT('',(86.22165,-72.8831,1.585)); +#211012 = LINE('',#211013,#211014); +#211013 = CARTESIAN_POINT('',(86.22165,-74.168663,1.585)); +#211014 = VECTOR('',#211015,1.); +#211015 = DIRECTION('',(0.,1.,0.)); +#211016 = ORIENTED_EDGE('',*,*,#211017,.T.); +#211017 = EDGE_CURVE('',#211010,#210893,#211018,.T.); +#211018 = LINE('',#211019,#211020); +#211019 = CARTESIAN_POINT('',(86.22165,-72.8831,1.585)); +#211020 = VECTOR('',#211021,1.); +#211021 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#211022 = PLANE('',#211023); +#211023 = AXIS2_PLACEMENT_3D('',#211024,#211025,#211026); +#211024 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211025 = DIRECTION('',(0.,0.,1.)); +#211026 = DIRECTION('',(1.,0.,-0.)); +#211027 = SHELL_BASED_SURFACE_MODEL('',(#211028)); +#211028 = OPEN_SHELL('',(#211029)); +#211029 = ADVANCED_FACE('',(#211030),#211224,.T.); +#211030 = FACE_BOUND('',#211031,.F.); +#211031 = EDGE_LOOP('',(#211032,#211043,#211051,#211059,#211067,#211076, + #211084,#211093,#211101,#211110,#211118,#211126,#211134,#211143, + #211151,#211160,#211168,#211177,#211185,#211193,#211201,#211210, + #211218)); +#211032 = ORIENTED_EDGE('',*,*,#211033,.T.); +#211033 = EDGE_CURVE('',#211034,#211036,#211038,.T.); +#211034 = VERTEX_POINT('',#211035); +#211035 = CARTESIAN_POINT('',(170.185714,-74.394597,1.585)); +#211036 = VERTEX_POINT('',#211037); +#211037 = CARTESIAN_POINT('',(170.185714,-74.264597,1.585)); +#211038 = CIRCLE('',#211039,6.500000000092E-02); +#211039 = AXIS2_PLACEMENT_3D('',#211040,#211041,#211042); +#211040 = CARTESIAN_POINT('',(170.18571434486,-74.329597,1.585)); +#211041 = DIRECTION('',(0.,0.,-1.)); +#211042 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#211043 = ORIENTED_EDGE('',*,*,#211044,.T.); +#211044 = EDGE_CURVE('',#211036,#211045,#211047,.T.); +#211045 = VERTEX_POINT('',#211046); +#211046 = CARTESIAN_POINT('',(170.742857,-74.264597,1.585)); +#211047 = LINE('',#211048,#211049); +#211048 = CARTESIAN_POINT('',(170.185714,-74.264597,1.585)); +#211049 = VECTOR('',#211050,1.); +#211050 = DIRECTION('',(1.,0.,0.)); +#211051 = ORIENTED_EDGE('',*,*,#211052,.T.); +#211052 = EDGE_CURVE('',#211045,#211053,#211055,.T.); +#211053 = VERTEX_POINT('',#211054); +#211054 = CARTESIAN_POINT('',(170.760984,-74.268202,1.585)); +#211055 = LINE('',#211056,#211057); +#211056 = CARTESIAN_POINT('',(170.742857,-74.264597,1.585)); +#211057 = VECTOR('',#211058,1.); +#211058 = DIRECTION('',(0.980792366126,-0.195054696303,0.)); +#211059 = ORIENTED_EDGE('',*,*,#211060,.T.); +#211060 = EDGE_CURVE('',#211053,#211061,#211063,.T.); +#211061 = VERTEX_POINT('',#211062); +#211062 = CARTESIAN_POINT('',(170.767731,-74.269545,1.585)); +#211063 = LINE('',#211064,#211065); +#211064 = CARTESIAN_POINT('',(170.760984,-74.268202,1.585)); +#211065 = VECTOR('',#211066,1.); +#211066 = DIRECTION('',(0.980759175067,-0.195221516542,0.)); +#211067 = ORIENTED_EDGE('',*,*,#211068,.T.); +#211068 = EDGE_CURVE('',#211061,#211069,#211071,.T.); +#211069 = VERTEX_POINT('',#211070); +#211070 = CARTESIAN_POINT('',(170.791775,-74.372399,1.585)); +#211071 = CIRCLE('',#211072,6.499987492257E-02); +#211072 = AXIS2_PLACEMENT_3D('',#211073,#211074,#211075); +#211073 = CARTESIAN_POINT('',(170.74285685187,-74.32959714812,1.585)); +#211074 = DIRECTION('',(0.,0.,-1.)); +#211075 = DIRECTION('',(0.382679938354,0.92388097977,0.)); +#211076 = ORIENTED_EDGE('',*,*,#211077,.T.); +#211077 = EDGE_CURVE('',#211069,#211078,#211080,.T.); +#211078 = VERTEX_POINT('',#211079); +#211079 = CARTESIAN_POINT('',(170.586084,-74.610369,1.585)); +#211080 = LINE('',#211081,#211082); +#211081 = CARTESIAN_POINT('',(170.791775,-74.372399,1.585)); +#211082 = VECTOR('',#211083,1.); +#211083 = DIRECTION('',(-0.653932030599,-0.756553302389,0.)); +#211084 = ORIENTED_EDGE('',*,*,#211085,.T.); +#211085 = EDGE_CURVE('',#211078,#211086,#211088,.T.); +#211086 = VERTEX_POINT('',#211087); +#211087 = CARTESIAN_POINT('',(170.804941,-74.829225,1.585)); +#211088 = CIRCLE('',#211089,0.308107260308); +#211089 = AXIS2_PLACEMENT_3D('',#211090,#211091,#211092); +#211090 = CARTESIAN_POINT('',(170.50712370557,-74.90818665521,1.585)); +#211091 = DIRECTION('',(0.,0.,-1.)); +#211092 = DIRECTION('',(0.256275344983,0.966603821405,0.)); +#211093 = ORIENTED_EDGE('',*,*,#211094,.T.); +#211094 = EDGE_CURVE('',#211086,#211095,#211097,.T.); +#211095 = VERTEX_POINT('',#211096); +#211096 = CARTESIAN_POINT('',(170.804941,-75.072824,1.585)); +#211097 = LINE('',#211098,#211099); +#211098 = CARTESIAN_POINT('',(170.804941,-74.829225,1.585)); +#211099 = VECTOR('',#211100,1.); +#211100 = DIRECTION('',(0.,-1.,0.)); +#211101 = ORIENTED_EDGE('',*,*,#211102,.T.); +#211102 = EDGE_CURVE('',#211095,#211103,#211105,.T.); +#211103 = VERTEX_POINT('',#211104); +#211104 = CARTESIAN_POINT('',(170.586084,-75.291681,1.585)); +#211105 = CIRCLE('',#211106,0.308111908981); +#211106 = AXIS2_PLACEMENT_3D('',#211107,#211108,#211109); +#211107 = CARTESIAN_POINT('',(170.50711961898,-74.99385961898,1.585)); +#211108 = DIRECTION('',(0.,0.,-1.)); +#211109 = DIRECTION('',(0.966601330004,-0.256284741712,0.)); +#211110 = ORIENTED_EDGE('',*,*,#211111,.T.); +#211111 = EDGE_CURVE('',#211103,#211112,#211114,.T.); +#211112 = VERTEX_POINT('',#211113); +#211113 = CARTESIAN_POINT('',(170.299628,-75.291681,1.585)); +#211114 = LINE('',#211115,#211116); +#211115 = CARTESIAN_POINT('',(170.586084,-75.291681,1.585)); +#211116 = VECTOR('',#211117,1.); +#211117 = DIRECTION('',(-1.,0.,0.)); +#211118 = ORIENTED_EDGE('',*,*,#211119,.T.); +#211119 = EDGE_CURVE('',#211112,#211120,#211122,.T.); +#211120 = VERTEX_POINT('',#211121); +#211121 = CARTESIAN_POINT('',(170.191273,-75.238491,1.585)); +#211122 = LINE('',#211123,#211124); +#211123 = CARTESIAN_POINT('',(170.299628,-75.291681,1.585)); +#211124 = VECTOR('',#211125,1.); +#211125 = DIRECTION('',(-0.897675654444,0.440656804576,0.)); +#211126 = ORIENTED_EDGE('',*,*,#211127,.T.); +#211127 = EDGE_CURVE('',#211120,#211128,#211130,.T.); +#211128 = VERTEX_POINT('',#211129); +#211129 = CARTESIAN_POINT('',(170.139752,-75.189843,1.585)); +#211130 = LINE('',#211131,#211132); +#211131 = CARTESIAN_POINT('',(170.191273,-75.238491,1.585)); +#211132 = VECTOR('',#211133,1.); +#211133 = DIRECTION('',(-0.727088683259,0.686543550459,0.)); +#211134 = ORIENTED_EDGE('',*,*,#211135,.T.); +#211135 = EDGE_CURVE('',#211128,#211136,#211138,.T.); +#211136 = VERTEX_POINT('',#211137); +#211137 = CARTESIAN_POINT('',(170.231676,-75.097921,1.585)); +#211138 = CIRCLE('',#211139,6.499937665137E-02); +#211139 = AXIS2_PLACEMENT_3D('',#211140,#211141,#211142); +#211140 = CARTESIAN_POINT('',(170.18571418097,-75.14388218097,1.585)); +#211141 = DIRECTION('',(0.,0.,-1.)); +#211142 = DIRECTION('',(-0.707117257764,-0.707096304454,-0.)); +#211143 = ORIENTED_EDGE('',*,*,#211144,.T.); +#211144 = EDGE_CURVE('',#211136,#211145,#211147,.T.); +#211145 = VERTEX_POINT('',#211146); +#211146 = CARTESIAN_POINT('',(170.267074,-75.133319,1.585)); +#211147 = LINE('',#211148,#211149); +#211148 = CARTESIAN_POINT('',(170.231676,-75.097921,1.585)); +#211149 = VECTOR('',#211150,1.); +#211150 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#211151 = ORIENTED_EDGE('',*,*,#211152,.T.); +#211152 = EDGE_CURVE('',#211145,#211153,#211155,.T.); +#211153 = VERTEX_POINT('',#211154); +#211154 = CARTESIAN_POINT('',(170.618641,-75.133318,1.585)); +#211155 = CIRCLE('',#211156,0.325009177747); +#211156 = AXIS2_PLACEMENT_3D('',#211157,#211158,#211159); +#211157 = CARTESIAN_POINT('',(170.44285672242,-74.85994855515,1.585)); +#211158 = DIRECTION('',(0.,0.,1.)); +#211159 = DIRECTION('',(-0.540854641838,-0.841116077841,0.)); +#211160 = ORIENTED_EDGE('',*,*,#211161,.T.); +#211161 = EDGE_CURVE('',#211153,#211162,#211164,.T.); +#211162 = VERTEX_POINT('',#211163); +#211163 = CARTESIAN_POINT('',(170.646578,-75.105379,1.585)); +#211164 = LINE('',#211165,#211166); +#211165 = CARTESIAN_POINT('',(170.618641,-75.133318,1.585)); +#211166 = VECTOR('',#211167,1.); +#211167 = DIRECTION('',(0.707081470877,0.70713209059,0.)); +#211168 = ORIENTED_EDGE('',*,*,#211169,.T.); +#211169 = EDGE_CURVE('',#211162,#211170,#211172,.T.); +#211170 = VERTEX_POINT('',#211171); +#211171 = CARTESIAN_POINT('',(170.646579,-74.796671,1.585)); +#211172 = CIRCLE('',#211173,0.277413880171); +#211173 = AXIS2_PLACEMENT_3D('',#211174,#211175,#211176); +#211174 = CARTESIAN_POINT('',(170.41607187624,-74.95102425331,1.585)); +#211175 = DIRECTION('',(0.,-0.,1.)); +#211176 = DIRECTION('',(0.830910564434,-0.556405997373,-0.)); +#211177 = ORIENTED_EDGE('',*,*,#211178,.T.); +#211178 = EDGE_CURVE('',#211170,#211179,#211181,.T.); +#211179 = VERTEX_POINT('',#211180); +#211180 = CARTESIAN_POINT('',(170.61864,-74.768732,1.585)); +#211181 = LINE('',#211182,#211183); +#211182 = CARTESIAN_POINT('',(170.646579,-74.796671,1.585)); +#211183 = VECTOR('',#211184,1.); +#211184 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211185 = ORIENTED_EDGE('',*,*,#211186,.T.); +#211186 = EDGE_CURVE('',#211179,#211187,#211189,.T.); +#211187 = VERTEX_POINT('',#211188); +#211188 = CARTESIAN_POINT('',(170.556083,-74.737454,1.585)); +#211189 = LINE('',#211190,#211191); +#211190 = CARTESIAN_POINT('',(170.61864,-74.768732,1.585)); +#211191 = VECTOR('',#211192,1.); +#211192 = DIRECTION('',(-0.89443005055,0.447207876354,0.)); +#211193 = ORIENTED_EDGE('',*,*,#211194,.T.); +#211194 = EDGE_CURVE('',#211187,#211195,#211197,.T.); +#211195 = VERTEX_POINT('',#211196); +#211196 = CARTESIAN_POINT('',(170.442857,-74.737454,1.585)); +#211197 = LINE('',#211198,#211199); +#211198 = CARTESIAN_POINT('',(170.556083,-74.737454,1.585)); +#211199 = VECTOR('',#211200,1.); +#211200 = DIRECTION('',(-1.,0.,0.)); +#211201 = ORIENTED_EDGE('',*,*,#211202,.T.); +#211202 = EDGE_CURVE('',#211195,#211203,#211205,.T.); +#211203 = VERTEX_POINT('',#211204); +#211204 = CARTESIAN_POINT('',(170.39394,-74.629651,1.585)); +#211205 = CIRCLE('',#211206,6.500002288385E-02); +#211206 = AXIS2_PLACEMENT_3D('',#211207,#211208,#211209); +#211207 = CARTESIAN_POINT('',(170.44285736015,-74.67245397711,1.585)); +#211208 = DIRECTION('',(0.,0.,-1.)); +#211209 = DIRECTION('',(-5.54088725998E-06,-0.999999999985,-0.)); +#211210 = ORIENTED_EDGE('',*,*,#211211,.T.); +#211211 = EDGE_CURVE('',#211203,#211212,#211214,.T.); +#211212 = VERTEX_POINT('',#211213); +#211213 = CARTESIAN_POINT('',(170.599612,-74.394597,1.585)); +#211214 = LINE('',#211215,#211216); +#211215 = CARTESIAN_POINT('',(170.39394,-74.629651,1.585)); +#211216 = VECTOR('',#211217,1.); +#211217 = DIRECTION('',(0.658504154528,0.75257709138,0.)); +#211218 = ORIENTED_EDGE('',*,*,#211219,.T.); +#211219 = EDGE_CURVE('',#211212,#211034,#211220,.T.); +#211220 = LINE('',#211221,#211222); +#211221 = CARTESIAN_POINT('',(170.599612,-74.394597,1.585)); +#211222 = VECTOR('',#211223,1.); +#211223 = DIRECTION('',(-1.,0.,0.)); +#211224 = PLANE('',#211225); +#211225 = AXIS2_PLACEMENT_3D('',#211226,#211227,#211228); +#211226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211227 = DIRECTION('',(0.,0.,1.)); +#211228 = DIRECTION('',(1.,0.,-0.)); +#211229 = SHELL_BASED_SURFACE_MODEL('',(#211230)); +#211230 = OPEN_SHELL('',(#211231)); +#211231 = ADVANCED_FACE('',(#211232),#211426,.T.); +#211232 = FACE_BOUND('',#211233,.F.); +#211233 = EDGE_LOOP('',(#211234,#211245,#211253,#211261,#211269,#211278, + #211286,#211295,#211303,#211312,#211320,#211328,#211336,#211345, + #211353,#211362,#211370,#211379,#211387,#211395,#211403,#211412, + #211420)); +#211234 = ORIENTED_EDGE('',*,*,#211235,.T.); +#211235 = EDGE_CURVE('',#211236,#211238,#211240,.T.); +#211236 = VERTEX_POINT('',#211237); +#211237 = CARTESIAN_POINT('',(171.814286,-74.394597,1.585)); +#211238 = VERTEX_POINT('',#211239); +#211239 = CARTESIAN_POINT('',(171.814286,-74.264597,1.585)); +#211240 = CIRCLE('',#211241,6.500000000093E-02); +#211241 = AXIS2_PLACEMENT_3D('',#211242,#211243,#211244); +#211242 = CARTESIAN_POINT('',(171.81428634486,-74.329597,1.585)); +#211243 = DIRECTION('',(0.,0.,-1.)); +#211244 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#211245 = ORIENTED_EDGE('',*,*,#211246,.T.); +#211246 = EDGE_CURVE('',#211238,#211247,#211249,.T.); +#211247 = VERTEX_POINT('',#211248); +#211248 = CARTESIAN_POINT('',(172.371429,-74.264597,1.585)); +#211249 = LINE('',#211250,#211251); +#211250 = CARTESIAN_POINT('',(171.814286,-74.264597,1.585)); +#211251 = VECTOR('',#211252,1.); +#211252 = DIRECTION('',(1.,0.,0.)); +#211253 = ORIENTED_EDGE('',*,*,#211254,.T.); +#211254 = EDGE_CURVE('',#211247,#211255,#211257,.T.); +#211255 = VERTEX_POINT('',#211256); +#211256 = CARTESIAN_POINT('',(172.389556,-74.268202,1.585)); +#211257 = LINE('',#211258,#211259); +#211258 = CARTESIAN_POINT('',(172.371429,-74.264597,1.585)); +#211259 = VECTOR('',#211260,1.); +#211260 = DIRECTION('',(0.980792366125,-0.195054696303,0.)); +#211261 = ORIENTED_EDGE('',*,*,#211262,.T.); +#211262 = EDGE_CURVE('',#211255,#211263,#211265,.T.); +#211263 = VERTEX_POINT('',#211264); +#211264 = CARTESIAN_POINT('',(172.396303,-74.269545,1.585)); +#211265 = LINE('',#211266,#211267); +#211266 = CARTESIAN_POINT('',(172.389556,-74.268202,1.585)); +#211267 = VECTOR('',#211268,1.); +#211268 = DIRECTION('',(0.980759175067,-0.195221516542,0.)); +#211269 = ORIENTED_EDGE('',*,*,#211270,.T.); +#211270 = EDGE_CURVE('',#211263,#211271,#211273,.T.); +#211271 = VERTEX_POINT('',#211272); +#211272 = CARTESIAN_POINT('',(172.420347,-74.372399,1.585)); +#211273 = CIRCLE('',#211274,6.499987492259E-02); +#211274 = AXIS2_PLACEMENT_3D('',#211275,#211276,#211277); +#211275 = CARTESIAN_POINT('',(172.37142885187,-74.32959714812,1.585)); +#211276 = DIRECTION('',(0.,0.,-1.)); +#211277 = DIRECTION('',(0.382679938354,0.92388097977,0.)); +#211278 = ORIENTED_EDGE('',*,*,#211279,.T.); +#211279 = EDGE_CURVE('',#211271,#211280,#211282,.T.); +#211280 = VERTEX_POINT('',#211281); +#211281 = CARTESIAN_POINT('',(172.214656,-74.610369,1.585)); +#211282 = LINE('',#211283,#211284); +#211283 = CARTESIAN_POINT('',(172.420347,-74.372399,1.585)); +#211284 = VECTOR('',#211285,1.); +#211285 = DIRECTION('',(-0.653932030599,-0.756553302389,0.)); +#211286 = ORIENTED_EDGE('',*,*,#211287,.T.); +#211287 = EDGE_CURVE('',#211280,#211288,#211290,.T.); +#211288 = VERTEX_POINT('',#211289); +#211289 = CARTESIAN_POINT('',(172.433513,-74.829225,1.585)); +#211290 = CIRCLE('',#211291,0.308107260307); +#211291 = AXIS2_PLACEMENT_3D('',#211292,#211293,#211294); +#211292 = CARTESIAN_POINT('',(172.13569570557,-74.90818665521,1.585)); +#211293 = DIRECTION('',(0.,0.,-1.)); +#211294 = DIRECTION('',(0.256275344982,0.966603821405,0.)); +#211295 = ORIENTED_EDGE('',*,*,#211296,.T.); +#211296 = EDGE_CURVE('',#211288,#211297,#211299,.T.); +#211297 = VERTEX_POINT('',#211298); +#211298 = CARTESIAN_POINT('',(172.433513,-75.072824,1.585)); +#211299 = LINE('',#211300,#211301); +#211300 = CARTESIAN_POINT('',(172.433513,-74.829225,1.585)); +#211301 = VECTOR('',#211302,1.); +#211302 = DIRECTION('',(0.,-1.,0.)); +#211303 = ORIENTED_EDGE('',*,*,#211304,.T.); +#211304 = EDGE_CURVE('',#211297,#211305,#211307,.T.); +#211305 = VERTEX_POINT('',#211306); +#211306 = CARTESIAN_POINT('',(172.214656,-75.291681,1.585)); +#211307 = CIRCLE('',#211308,0.308111908981); +#211308 = AXIS2_PLACEMENT_3D('',#211309,#211310,#211311); +#211309 = CARTESIAN_POINT('',(172.13569161898,-74.99385961898,1.585)); +#211310 = DIRECTION('',(0.,0.,-1.)); +#211311 = DIRECTION('',(0.966601330004,-0.256284741711,0.)); +#211312 = ORIENTED_EDGE('',*,*,#211313,.T.); +#211313 = EDGE_CURVE('',#211305,#211314,#211316,.T.); +#211314 = VERTEX_POINT('',#211315); +#211315 = CARTESIAN_POINT('',(171.9282,-75.291681,1.585)); +#211316 = LINE('',#211317,#211318); +#211317 = CARTESIAN_POINT('',(172.214656,-75.291681,1.585)); +#211318 = VECTOR('',#211319,1.); +#211319 = DIRECTION('',(-1.,0.,0.)); +#211320 = ORIENTED_EDGE('',*,*,#211321,.T.); +#211321 = EDGE_CURVE('',#211314,#211322,#211324,.T.); +#211322 = VERTEX_POINT('',#211323); +#211323 = CARTESIAN_POINT('',(171.819845,-75.238491,1.585)); +#211324 = LINE('',#211325,#211326); +#211325 = CARTESIAN_POINT('',(171.9282,-75.291681,1.585)); +#211326 = VECTOR('',#211327,1.); +#211327 = DIRECTION('',(-0.897675654444,0.440656804576,0.)); +#211328 = ORIENTED_EDGE('',*,*,#211329,.T.); +#211329 = EDGE_CURVE('',#211322,#211330,#211332,.T.); +#211330 = VERTEX_POINT('',#211331); +#211331 = CARTESIAN_POINT('',(171.768324,-75.189843,1.585)); +#211332 = LINE('',#211333,#211334); +#211333 = CARTESIAN_POINT('',(171.819845,-75.238491,1.585)); +#211334 = VECTOR('',#211335,1.); +#211335 = DIRECTION('',(-0.727088683259,0.686543550459,0.)); +#211336 = ORIENTED_EDGE('',*,*,#211337,.T.); +#211337 = EDGE_CURVE('',#211330,#211338,#211340,.T.); +#211338 = VERTEX_POINT('',#211339); +#211339 = CARTESIAN_POINT('',(171.860248,-75.097921,1.585)); +#211340 = CIRCLE('',#211341,6.499937665136E-02); +#211341 = AXIS2_PLACEMENT_3D('',#211342,#211343,#211344); +#211342 = CARTESIAN_POINT('',(171.81428618097,-75.14388218097,1.585)); +#211343 = DIRECTION('',(0.,0.,-1.)); +#211344 = DIRECTION('',(-0.707117257763,-0.707096304454,-0.)); +#211345 = ORIENTED_EDGE('',*,*,#211346,.T.); +#211346 = EDGE_CURVE('',#211338,#211347,#211349,.T.); +#211347 = VERTEX_POINT('',#211348); +#211348 = CARTESIAN_POINT('',(171.895646,-75.133319,1.585)); +#211349 = LINE('',#211350,#211351); +#211350 = CARTESIAN_POINT('',(171.860248,-75.097921,1.585)); +#211351 = VECTOR('',#211352,1.); +#211352 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#211353 = ORIENTED_EDGE('',*,*,#211354,.T.); +#211354 = EDGE_CURVE('',#211347,#211355,#211357,.T.); +#211355 = VERTEX_POINT('',#211356); +#211356 = CARTESIAN_POINT('',(172.247213,-75.133318,1.585)); +#211357 = CIRCLE('',#211358,0.325009177747); +#211358 = AXIS2_PLACEMENT_3D('',#211359,#211360,#211361); +#211359 = CARTESIAN_POINT('',(172.07142872242,-74.85994855515,1.585)); +#211360 = DIRECTION('',(0.,0.,1.)); +#211361 = DIRECTION('',(-0.540854641838,-0.841116077841,0.)); +#211362 = ORIENTED_EDGE('',*,*,#211363,.T.); +#211363 = EDGE_CURVE('',#211355,#211364,#211366,.T.); +#211364 = VERTEX_POINT('',#211365); +#211365 = CARTESIAN_POINT('',(172.27515,-75.105379,1.585)); +#211366 = LINE('',#211367,#211368); +#211367 = CARTESIAN_POINT('',(172.247213,-75.133318,1.585)); +#211368 = VECTOR('',#211369,1.); +#211369 = DIRECTION('',(0.707081470877,0.70713209059,0.)); +#211370 = ORIENTED_EDGE('',*,*,#211371,.T.); +#211371 = EDGE_CURVE('',#211364,#211372,#211374,.T.); +#211372 = VERTEX_POINT('',#211373); +#211373 = CARTESIAN_POINT('',(172.275151,-74.796671,1.585)); +#211374 = CIRCLE('',#211375,0.277413880171); +#211375 = AXIS2_PLACEMENT_3D('',#211376,#211377,#211378); +#211376 = CARTESIAN_POINT('',(172.04464387624,-74.95102425331,1.585)); +#211377 = DIRECTION('',(0.,-0.,1.)); +#211378 = DIRECTION('',(0.830910564433,-0.556405997373,-0.)); +#211379 = ORIENTED_EDGE('',*,*,#211380,.T.); +#211380 = EDGE_CURVE('',#211372,#211381,#211383,.T.); +#211381 = VERTEX_POINT('',#211382); +#211382 = CARTESIAN_POINT('',(172.247212,-74.768732,1.585)); +#211383 = LINE('',#211384,#211385); +#211384 = CARTESIAN_POINT('',(172.275151,-74.796671,1.585)); +#211385 = VECTOR('',#211386,1.); +#211386 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211387 = ORIENTED_EDGE('',*,*,#211388,.T.); +#211388 = EDGE_CURVE('',#211381,#211389,#211391,.T.); +#211389 = VERTEX_POINT('',#211390); +#211390 = CARTESIAN_POINT('',(172.184655,-74.737454,1.585)); +#211391 = LINE('',#211392,#211393); +#211392 = CARTESIAN_POINT('',(172.247212,-74.768732,1.585)); +#211393 = VECTOR('',#211394,1.); +#211394 = DIRECTION('',(-0.89443005055,0.447207876354,0.)); +#211395 = ORIENTED_EDGE('',*,*,#211396,.T.); +#211396 = EDGE_CURVE('',#211389,#211397,#211399,.T.); +#211397 = VERTEX_POINT('',#211398); +#211398 = CARTESIAN_POINT('',(172.071429,-74.737454,1.585)); +#211399 = LINE('',#211400,#211401); +#211400 = CARTESIAN_POINT('',(172.184655,-74.737454,1.585)); +#211401 = VECTOR('',#211402,1.); +#211402 = DIRECTION('',(-1.,0.,0.)); +#211403 = ORIENTED_EDGE('',*,*,#211404,.T.); +#211404 = EDGE_CURVE('',#211397,#211405,#211407,.T.); +#211405 = VERTEX_POINT('',#211406); +#211406 = CARTESIAN_POINT('',(172.022512,-74.629651,1.585)); +#211407 = CIRCLE('',#211408,6.500002288385E-02); +#211408 = AXIS2_PLACEMENT_3D('',#211409,#211410,#211411); +#211409 = CARTESIAN_POINT('',(172.07142936015,-74.67245397711,1.585)); +#211410 = DIRECTION('',(0.,0.,-1.)); +#211411 = DIRECTION('',(-5.540887697237E-06,-0.999999999985,-0.)); +#211412 = ORIENTED_EDGE('',*,*,#211413,.T.); +#211413 = EDGE_CURVE('',#211405,#211414,#211416,.T.); +#211414 = VERTEX_POINT('',#211415); +#211415 = CARTESIAN_POINT('',(172.228184,-74.394597,1.585)); +#211416 = LINE('',#211417,#211418); +#211417 = CARTESIAN_POINT('',(172.022512,-74.629651,1.585)); +#211418 = VECTOR('',#211419,1.); +#211419 = DIRECTION('',(0.658504154528,0.75257709138,0.)); +#211420 = ORIENTED_EDGE('',*,*,#211421,.T.); +#211421 = EDGE_CURVE('',#211414,#211236,#211422,.T.); +#211422 = LINE('',#211423,#211424); +#211423 = CARTESIAN_POINT('',(172.228184,-74.394597,1.585)); +#211424 = VECTOR('',#211425,1.); +#211425 = DIRECTION('',(-1.,0.,0.)); +#211426 = PLANE('',#211427); +#211427 = AXIS2_PLACEMENT_3D('',#211428,#211429,#211430); +#211428 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211429 = DIRECTION('',(0.,0.,1.)); +#211430 = DIRECTION('',(1.,0.,-0.)); +#211431 = SHELL_BASED_SURFACE_MODEL('',(#211432)); +#211432 = OPEN_SHELL('',(#211433)); +#211433 = ADVANCED_FACE('',(#211434),#211569,.T.); +#211434 = FACE_BOUND('',#211435,.F.); +#211435 = EDGE_LOOP('',(#211436,#211447,#211455,#211463,#211471,#211480, + #211488,#211496,#211504,#211513,#211521,#211530,#211538,#211547, + #211555,#211563)); +#211436 = ORIENTED_EDGE('',*,*,#211437,.T.); +#211437 = EDGE_CURVE('',#211438,#211440,#211442,.T.); +#211438 = VERTEX_POINT('',#211439); +#211439 = CARTESIAN_POINT('',(185.009287,-73.981636,1.585)); +#211440 = VERTEX_POINT('',#211441); +#211441 = CARTESIAN_POINT('',(185.178286,-74.051638,1.585)); +#211442 = CIRCLE('',#211443,0.109999394362); +#211443 = AXIS2_PLACEMENT_3D('',#211444,#211445,#211446); +#211444 = CARTESIAN_POINT('',(185.0704,-74.07309674562,1.585)); +#211445 = DIRECTION('',(0.,0.,-1.)); +#211446 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#211447 = ORIENTED_EDGE('',*,*,#211448,.T.); +#211448 = EDGE_CURVE('',#211440,#211449,#211451,.T.); +#211449 = VERTEX_POINT('',#211450); +#211450 = CARTESIAN_POINT('',(185.1804,-74.725003,1.585)); +#211451 = LINE('',#211452,#211453); +#211452 = CARTESIAN_POINT('',(185.178286,-74.051638,1.585)); +#211453 = VECTOR('',#211454,1.); +#211454 = DIRECTION('',(3.139440841247E-03,-0.999995071943,0.)); +#211455 = ORIENTED_EDGE('',*,*,#211456,.T.); +#211456 = EDGE_CURVE('',#211449,#211457,#211459,.T.); +#211457 = VERTEX_POINT('',#211458); +#211458 = CARTESIAN_POINT('',(185.722305,-74.725003,1.585)); +#211459 = LINE('',#211460,#211461); +#211460 = CARTESIAN_POINT('',(185.1804,-74.725003,1.585)); +#211461 = VECTOR('',#211462,1.); +#211462 = DIRECTION('',(1.,0.,0.)); +#211463 = ORIENTED_EDGE('',*,*,#211464,.T.); +#211464 = EDGE_CURVE('',#211457,#211465,#211467,.T.); +#211465 = VERTEX_POINT('',#211466); +#211466 = CARTESIAN_POINT('',(185.724419,-74.28021,1.585)); +#211467 = LINE('',#211468,#211469); +#211468 = CARTESIAN_POINT('',(185.722305,-74.725003,1.585)); +#211469 = VECTOR('',#211470,1.); +#211470 = DIRECTION('',(4.752718959153E-03,0.999988705767,0.)); +#211471 = ORIENTED_EDGE('',*,*,#211472,.T.); +#211472 = EDGE_CURVE('',#211465,#211473,#211475,.T.); +#211473 = VERTEX_POINT('',#211474); +#211474 = CARTESIAN_POINT('',(185.940191,-74.28021,1.585)); +#211475 = CIRCLE('',#211476,0.109999639072); +#211476 = AXIS2_PLACEMENT_3D('',#211477,#211478,#211479); +#211477 = CARTESIAN_POINT('',(185.832305,-74.30167,1.585)); +#211478 = DIRECTION('',(0.,0.,-1.)); +#211479 = DIRECTION('',(-0.980785036297,0.195091549218,0.)); +#211480 = ORIENTED_EDGE('',*,*,#211481,.T.); +#211481 = EDGE_CURVE('',#211473,#211482,#211484,.T.); +#211482 = VERTEX_POINT('',#211483); +#211483 = CARTESIAN_POINT('',(185.942305,-74.725003,1.585)); +#211484 = LINE('',#211485,#211486); +#211485 = CARTESIAN_POINT('',(185.940191,-74.28021,1.585)); +#211486 = VECTOR('',#211487,1.); +#211487 = DIRECTION('',(4.752718959153E-03,-0.999988705767,0.)); +#211488 = ORIENTED_EDGE('',*,*,#211489,.T.); +#211489 = EDGE_CURVE('',#211482,#211490,#211492,.T.); +#211490 = VERTEX_POINT('',#211491); +#211491 = CARTESIAN_POINT('',(186.5604,-74.725003,1.585)); +#211492 = LINE('',#211493,#211494); +#211493 = CARTESIAN_POINT('',(185.942305,-74.725003,1.585)); +#211494 = VECTOR('',#211495,1.); +#211495 = DIRECTION('',(1.,0.,0.)); +#211496 = ORIENTED_EDGE('',*,*,#211497,.T.); +#211497 = EDGE_CURVE('',#211490,#211498,#211500,.T.); +#211498 = VERTEX_POINT('',#211499); +#211499 = CARTESIAN_POINT('',(186.562514,-74.051638,1.585)); +#211500 = LINE('',#211501,#211502); +#211501 = CARTESIAN_POINT('',(186.5604,-74.725003,1.585)); +#211502 = VECTOR('',#211503,1.); +#211503 = DIRECTION('',(3.139440841289E-03,0.999995071943,0.)); +#211504 = ORIENTED_EDGE('',*,*,#211505,.T.); +#211505 = EDGE_CURVE('',#211498,#211506,#211508,.T.); +#211506 = VERTEX_POINT('',#211507); +#211507 = CARTESIAN_POINT('',(186.778286,-74.051638,1.585)); +#211508 = CIRCLE('',#211509,0.109999639072); +#211509 = AXIS2_PLACEMENT_3D('',#211510,#211511,#211512); +#211510 = CARTESIAN_POINT('',(186.6704,-74.073098,1.585)); +#211511 = DIRECTION('',(0.,0.,-1.)); +#211512 = DIRECTION('',(-0.980785036297,0.195091549218,0.)); +#211513 = ORIENTED_EDGE('',*,*,#211514,.T.); +#211514 = EDGE_CURVE('',#211506,#211515,#211517,.T.); +#211515 = VERTEX_POINT('',#211516); +#211516 = CARTESIAN_POINT('',(186.778286,-74.856463,1.585)); +#211517 = LINE('',#211518,#211519); +#211518 = CARTESIAN_POINT('',(186.778286,-74.051638,1.585)); +#211519 = VECTOR('',#211520,1.); +#211520 = DIRECTION('',(0.,-1.,0.)); +#211521 = ORIENTED_EDGE('',*,*,#211522,.T.); +#211522 = EDGE_CURVE('',#211515,#211523,#211525,.T.); +#211523 = VERTEX_POINT('',#211524); +#211524 = CARTESIAN_POINT('',(186.69186,-74.942889,1.585)); +#211525 = CIRCLE('',#211526,0.109995194153); +#211526 = AXIS2_PLACEMENT_3D('',#211527,#211528,#211529); +#211527 = CARTESIAN_POINT('',(186.67040378012,-74.83500678012,1.585)); +#211528 = DIRECTION('',(0.,0.,-1.)); +#211529 = DIRECTION('',(0.980790303675,-0.195065066626,0.)); +#211530 = ORIENTED_EDGE('',*,*,#211531,.T.); +#211531 = EDGE_CURVE('',#211523,#211532,#211534,.T.); +#211532 = VERTEX_POINT('',#211533); +#211533 = CARTESIAN_POINT('',(185.04894,-74.942889,1.585)); +#211534 = LINE('',#211535,#211536); +#211535 = CARTESIAN_POINT('',(186.69186,-74.942889,1.585)); +#211536 = VECTOR('',#211537,1.); +#211537 = DIRECTION('',(-1.,0.,0.)); +#211538 = ORIENTED_EDGE('',*,*,#211539,.T.); +#211539 = EDGE_CURVE('',#211532,#211540,#211542,.T.); +#211540 = VERTEX_POINT('',#211541); +#211541 = CARTESIAN_POINT('',(184.962514,-74.856463,1.585)); +#211542 = CIRCLE('',#211543,0.109995194153); +#211543 = AXIS2_PLACEMENT_3D('',#211544,#211545,#211546); +#211544 = CARTESIAN_POINT('',(185.07039621987,-74.83500678012,1.585)); +#211545 = DIRECTION('',(0.,0.,-1.)); +#211546 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#211547 = ORIENTED_EDGE('',*,*,#211548,.T.); +#211548 = EDGE_CURVE('',#211540,#211549,#211551,.T.); +#211549 = VERTEX_POINT('',#211550); +#211550 = CARTESIAN_POINT('',(184.962514,-74.051638,1.585)); +#211551 = LINE('',#211552,#211553); +#211552 = CARTESIAN_POINT('',(184.962514,-74.856463,1.585)); +#211553 = VECTOR('',#211554,1.); +#211554 = DIRECTION('',(0.,1.,0.)); +#211555 = ORIENTED_EDGE('',*,*,#211556,.T.); +#211556 = EDGE_CURVE('',#211549,#211557,#211559,.T.); +#211557 = VERTEX_POINT('',#211558); +#211558 = CARTESIAN_POINT('',(184.978938,-74.011985,1.585)); +#211559 = LINE('',#211560,#211561); +#211560 = CARTESIAN_POINT('',(184.962514,-74.051638,1.585)); +#211561 = VECTOR('',#211562,1.); +#211562 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#211563 = ORIENTED_EDGE('',*,*,#211564,.T.); +#211564 = EDGE_CURVE('',#211557,#211438,#211565,.T.); +#211565 = LINE('',#211566,#211567); +#211566 = CARTESIAN_POINT('',(184.978938,-74.011985,1.585)); +#211567 = VECTOR('',#211568,1.); +#211568 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#211569 = PLANE('',#211570); +#211570 = AXIS2_PLACEMENT_3D('',#211571,#211572,#211573); +#211571 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211572 = DIRECTION('',(0.,0.,1.)); +#211573 = DIRECTION('',(1.,0.,-0.)); +#211574 = SHELL_BASED_SURFACE_MODEL('',(#211575)); +#211575 = OPEN_SHELL('',(#211576)); +#211576 = ADVANCED_FACE('',(#211577),#211613,.T.); +#211577 = FACE_BOUND('',#211578,.F.); +#211578 = EDGE_LOOP('',(#211579,#211590,#211598,#211607)); +#211579 = ORIENTED_EDGE('',*,*,#211580,.T.); +#211580 = EDGE_CURVE('',#211581,#211583,#211585,.T.); +#211581 = VERTEX_POINT('',#211582); +#211582 = CARTESIAN_POINT('',(101.129392,-74.9056,1.585)); +#211583 = VERTEX_POINT('',#211584); +#211584 = CARTESIAN_POINT('',(101.129392,-74.7856,1.585)); +#211585 = CIRCLE('',#211586,6.000000000043E-02); +#211586 = AXIS2_PLACEMENT_3D('',#211587,#211588,#211589); +#211587 = CARTESIAN_POINT('',(101.12939177441,-74.8456,1.585)); +#211588 = DIRECTION('',(0.,0.,-1.)); +#211589 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#211590 = ORIENTED_EDGE('',*,*,#211591,.T.); +#211591 = EDGE_CURVE('',#211583,#211592,#211594,.T.); +#211592 = VERTEX_POINT('',#211593); +#211593 = CARTESIAN_POINT('',(101.603908,-74.7856,1.585)); +#211594 = LINE('',#211595,#211596); +#211595 = CARTESIAN_POINT('',(101.129392,-74.7856,1.585)); +#211596 = VECTOR('',#211597,1.); +#211597 = DIRECTION('',(1.,0.,0.)); +#211598 = ORIENTED_EDGE('',*,*,#211599,.T.); +#211599 = EDGE_CURVE('',#211592,#211600,#211602,.T.); +#211600 = VERTEX_POINT('',#211601); +#211601 = CARTESIAN_POINT('',(101.603908,-74.9056,1.585)); +#211602 = CIRCLE('',#211603,6.000000000043E-02); +#211603 = AXIS2_PLACEMENT_3D('',#211604,#211605,#211606); +#211604 = CARTESIAN_POINT('',(101.60390822558,-74.8456,1.585)); +#211605 = DIRECTION('',(0.,0.,-1.)); +#211606 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#211607 = ORIENTED_EDGE('',*,*,#211608,.T.); +#211608 = EDGE_CURVE('',#211600,#211581,#211609,.T.); +#211609 = LINE('',#211610,#211611); +#211610 = CARTESIAN_POINT('',(101.603908,-74.9056,1.585)); +#211611 = VECTOR('',#211612,1.); +#211612 = DIRECTION('',(-1.,0.,0.)); +#211613 = PLANE('',#211614); +#211614 = AXIS2_PLACEMENT_3D('',#211615,#211616,#211617); +#211615 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211616 = DIRECTION('',(0.,0.,1.)); +#211617 = DIRECTION('',(1.,0.,-0.)); +#211618 = SHELL_BASED_SURFACE_MODEL('',(#211619)); +#211619 = OPEN_SHELL('',(#211620)); +#211620 = ADVANCED_FACE('',(#211621),#211691,.T.); +#211621 = FACE_BOUND('',#211622,.F.); +#211622 = EDGE_LOOP('',(#211623,#211634,#211642,#211651,#211659,#211668, + #211676,#211685)); +#211623 = ORIENTED_EDGE('',*,*,#211624,.T.); +#211624 = EDGE_CURVE('',#211625,#211627,#211629,.T.); +#211625 = VERTEX_POINT('',#211626); +#211626 = CARTESIAN_POINT('',(103.861837,-74.509992,1.585)); +#211627 = VERTEX_POINT('',#211628); +#211628 = CARTESIAN_POINT('',(103.876469,-74.361433,1.585)); +#211629 = CIRCLE('',#211630,7.500006711463E-02); +#211630 = AXIS2_PLACEMENT_3D('',#211631,#211632,#211633); +#211631 = CARTESIAN_POINT('',(103.87646893288,-74.43643306711,1.585)); +#211632 = DIRECTION('',(0.,0.,-1.)); +#211633 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#211634 = ORIENTED_EDGE('',*,*,#211635,.T.); +#211635 = EDGE_CURVE('',#211627,#211636,#211638,.T.); +#211636 = VERTEX_POINT('',#211637); +#211637 = CARTESIAN_POINT('',(104.598159,-74.362162,1.585)); +#211638 = LINE('',#211639,#211640); +#211639 = CARTESIAN_POINT('',(103.876469,-74.361433,1.585)); +#211640 = VECTOR('',#211641,1.); +#211641 = DIRECTION('',(0.99999948982,-1.0101284874E-03,0.)); +#211642 = ORIENTED_EDGE('',*,*,#211643,.T.); +#211643 = EDGE_CURVE('',#211636,#211644,#211646,.T.); +#211644 = VERTEX_POINT('',#211645); +#211645 = CARTESIAN_POINT('',(104.950739,-74.71474,1.585)); +#211646 = CIRCLE('',#211647,0.383787726409); +#211647 = AXIS2_PLACEMENT_3D('',#211648,#211649,#211650); +#211648 = CARTESIAN_POINT('',(104.56812818139,-74.74477298896,1.585)); +#211649 = DIRECTION('',(0.,0.,-1.)); +#211650 = DIRECTION('',(7.824851224108E-02,0.996933884634,0.)); +#211651 = ORIENTED_EDGE('',*,*,#211652,.T.); +#211652 = EDGE_CURVE('',#211644,#211653,#211655,.T.); +#211653 = VERTEX_POINT('',#211654); +#211654 = CARTESIAN_POINT('',(104.950028,-74.832017,1.585)); +#211655 = LINE('',#211656,#211657); +#211656 = CARTESIAN_POINT('',(104.950739,-74.71474,1.585)); +#211657 = VECTOR('',#211658,1.); +#211658 = DIRECTION('',(-6.062458402254E-03,-0.99998162313,0.)); +#211659 = ORIENTED_EDGE('',*,*,#211660,.T.); +#211660 = EDGE_CURVE('',#211653,#211661,#211663,.T.); +#211661 = VERTEX_POINT('',#211662); +#211662 = CARTESIAN_POINT('',(104.801469,-74.817385,1.585)); +#211663 = CIRCLE('',#211664,7.500006711465E-02); +#211664 = AXIS2_PLACEMENT_3D('',#211665,#211666,#211667); +#211665 = CARTESIAN_POINT('',(104.87646906711,-74.81738506711,1.585)); +#211666 = DIRECTION('',(-0.,0.,-1.)); +#211667 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#211668 = ORIENTED_EDGE('',*,*,#211669,.T.); +#211669 = EDGE_CURVE('',#211661,#211670,#211672,.T.); +#211670 = VERTEX_POINT('',#211671); +#211671 = CARTESIAN_POINT('',(104.801469,-74.734317,1.585)); +#211672 = LINE('',#211673,#211674); +#211673 = CARTESIAN_POINT('',(104.801469,-74.817385,1.585)); +#211674 = VECTOR('',#211675,1.); +#211675 = DIRECTION('',(0.,1.,0.)); +#211676 = ORIENTED_EDGE('',*,*,#211677,.T.); +#211677 = EDGE_CURVE('',#211670,#211678,#211680,.T.); +#211678 = VERTEX_POINT('',#211679); +#211679 = CARTESIAN_POINT('',(104.578584,-74.511433,1.585)); +#211680 = CIRCLE('',#211681,0.239434552369); +#211681 = AXIS2_PLACEMENT_3D('',#211682,#211683,#211684); +#211682 = CARTESIAN_POINT('',(104.56257060777,-74.75033146407,1.585)); +#211683 = DIRECTION('',(0.,0.,1.)); +#211684 = DIRECTION('',(0.997760723601,6.688451569435E-02,-0.)); +#211685 = ORIENTED_EDGE('',*,*,#211686,.T.); +#211686 = EDGE_CURVE('',#211678,#211625,#211687,.T.); +#211687 = LINE('',#211688,#211689); +#211688 = CARTESIAN_POINT('',(104.578584,-74.511433,1.585)); +#211689 = VECTOR('',#211690,1.); +#211690 = DIRECTION('',(-0.999997979007,2.010468251347E-03,0.)); +#211691 = PLANE('',#211692); +#211692 = AXIS2_PLACEMENT_3D('',#211693,#211694,#211695); +#211693 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211694 = DIRECTION('',(0.,0.,1.)); +#211695 = DIRECTION('',(1.,0.,-0.)); +#211696 = SHELL_BASED_SURFACE_MODEL('',(#211697)); +#211697 = OPEN_SHELL('',(#211698)); +#211698 = ADVANCED_FACE('',(#211699),#211760,.T.); +#211699 = FACE_BOUND('',#211700,.F.); +#211700 = EDGE_LOOP('',(#211701,#211712,#211720,#211729,#211737,#211746, + #211754)); +#211701 = ORIENTED_EDGE('',*,*,#211702,.T.); +#211702 = EDGE_CURVE('',#211703,#211705,#211707,.T.); +#211703 = VERTEX_POINT('',#211704); +#211704 = CARTESIAN_POINT('',(174.19165,-73.8231,1.585)); +#211705 = VERTEX_POINT('',#211706); +#211706 = CARTESIAN_POINT('',(174.19165,-73.7031,1.585)); +#211707 = CIRCLE('',#211708,6.000000000042E-02); +#211708 = AXIS2_PLACEMENT_3D('',#211709,#211710,#211711); +#211709 = CARTESIAN_POINT('',(174.19164977441,-73.7631,1.585)); +#211710 = DIRECTION('',(0.,0.,-1.)); +#211711 = DIRECTION('',(3.75979472738E-06,-0.999999999993,0.)); +#211712 = ORIENTED_EDGE('',*,*,#211713,.T.); +#211713 = EDGE_CURVE('',#211705,#211714,#211716,.T.); +#211714 = VERTEX_POINT('',#211715); +#211715 = CARTESIAN_POINT('',(175.25165,-73.7031,1.585)); +#211716 = LINE('',#211717,#211718); +#211717 = CARTESIAN_POINT('',(174.19165,-73.7031,1.585)); +#211718 = VECTOR('',#211719,1.); +#211719 = DIRECTION('',(1.,0.,0.)); +#211720 = ORIENTED_EDGE('',*,*,#211721,.T.); +#211721 = EDGE_CURVE('',#211714,#211722,#211724,.T.); +#211722 = VERTEX_POINT('',#211723); +#211723 = CARTESIAN_POINT('',(175.31165,-73.7631,1.585)); +#211724 = CIRCLE('',#211725,5.999932016259E-02); +#211725 = AXIS2_PLACEMENT_3D('',#211726,#211727,#211728); +#211726 = CARTESIAN_POINT('',(175.25165067984,-73.76309932015,1.585)); +#211727 = DIRECTION('',(0.,0.,-1.)); +#211728 = DIRECTION('',(-1.133081564773E-05,0.999999999936,0.)); +#211729 = ORIENTED_EDGE('',*,*,#211730,.T.); +#211730 = EDGE_CURVE('',#211722,#211731,#211733,.T.); +#211731 = VERTEX_POINT('',#211732); +#211732 = CARTESIAN_POINT('',(175.31165,-74.8231,1.585)); +#211733 = LINE('',#211734,#211735); +#211734 = CARTESIAN_POINT('',(175.31165,-73.7631,1.585)); +#211735 = VECTOR('',#211736,1.); +#211736 = DIRECTION('',(0.,-1.,0.)); +#211737 = ORIENTED_EDGE('',*,*,#211738,.T.); +#211738 = EDGE_CURVE('',#211731,#211739,#211741,.T.); +#211739 = VERTEX_POINT('',#211740); +#211740 = CARTESIAN_POINT('',(175.19165,-74.8231,1.585)); +#211741 = CIRCLE('',#211742,6.00000000004E-02); +#211742 = AXIS2_PLACEMENT_3D('',#211743,#211744,#211745); +#211743 = CARTESIAN_POINT('',(175.25165,-74.82310022558,1.585)); +#211744 = DIRECTION('',(0.,0.,-1.)); +#211745 = DIRECTION('',(0.999999999993,3.759794727381E-06,0.)); +#211746 = ORIENTED_EDGE('',*,*,#211747,.T.); +#211747 = EDGE_CURVE('',#211739,#211748,#211750,.T.); +#211748 = VERTEX_POINT('',#211749); +#211749 = CARTESIAN_POINT('',(175.19165,-73.8231,1.585)); +#211750 = LINE('',#211751,#211752); +#211751 = CARTESIAN_POINT('',(175.19165,-74.8231,1.585)); +#211752 = VECTOR('',#211753,1.); +#211753 = DIRECTION('',(0.,1.,0.)); +#211754 = ORIENTED_EDGE('',*,*,#211755,.T.); +#211755 = EDGE_CURVE('',#211748,#211703,#211756,.T.); +#211756 = LINE('',#211757,#211758); +#211757 = CARTESIAN_POINT('',(175.19165,-73.8231,1.585)); +#211758 = VECTOR('',#211759,1.); +#211759 = DIRECTION('',(-1.,0.,0.)); +#211760 = PLANE('',#211761); +#211761 = AXIS2_PLACEMENT_3D('',#211762,#211763,#211764); +#211762 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211763 = DIRECTION('',(0.,0.,1.)); +#211764 = DIRECTION('',(1.,0.,-0.)); +#211765 = SHELL_BASED_SURFACE_MODEL('',(#211766)); +#211766 = OPEN_SHELL('',(#211767)); +#211767 = ADVANCED_FACE('',(#211768),#211829,.T.); +#211768 = FACE_BOUND('',#211769,.F.); +#211769 = EDGE_LOOP('',(#211770,#211781,#211789,#211798,#211806,#211815, + #211823)); +#211770 = ORIENTED_EDGE('',*,*,#211771,.T.); +#211771 = EDGE_CURVE('',#211772,#211774,#211776,.T.); +#211772 = VERTEX_POINT('',#211773); +#211773 = CARTESIAN_POINT('',(196.54165,-73.8231,1.585)); +#211774 = VERTEX_POINT('',#211775); +#211775 = CARTESIAN_POINT('',(196.54165,-73.7031,1.585)); +#211776 = CIRCLE('',#211777,6.000000000042E-02); +#211777 = AXIS2_PLACEMENT_3D('',#211778,#211779,#211780); +#211778 = CARTESIAN_POINT('',(196.54164977441,-73.7631,1.585)); +#211779 = DIRECTION('',(0.,0.,-1.)); +#211780 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#211781 = ORIENTED_EDGE('',*,*,#211782,.T.); +#211782 = EDGE_CURVE('',#211774,#211783,#211785,.T.); +#211783 = VERTEX_POINT('',#211784); +#211784 = CARTESIAN_POINT('',(197.60165,-73.7031,1.585)); +#211785 = LINE('',#211786,#211787); +#211786 = CARTESIAN_POINT('',(196.54165,-73.7031,1.585)); +#211787 = VECTOR('',#211788,1.); +#211788 = DIRECTION('',(1.,0.,0.)); +#211789 = ORIENTED_EDGE('',*,*,#211790,.T.); +#211790 = EDGE_CURVE('',#211783,#211791,#211793,.T.); +#211791 = VERTEX_POINT('',#211792); +#211792 = CARTESIAN_POINT('',(197.66165,-73.7631,1.585)); +#211793 = CIRCLE('',#211794,5.999932016259E-02); +#211794 = AXIS2_PLACEMENT_3D('',#211795,#211796,#211797); +#211795 = CARTESIAN_POINT('',(197.60165067984,-73.76309932015,1.585)); +#211796 = DIRECTION('',(0.,0.,-1.)); +#211797 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#211798 = ORIENTED_EDGE('',*,*,#211799,.T.); +#211799 = EDGE_CURVE('',#211791,#211800,#211802,.T.); +#211800 = VERTEX_POINT('',#211801); +#211801 = CARTESIAN_POINT('',(197.66165,-74.8231,1.585)); +#211802 = LINE('',#211803,#211804); +#211803 = CARTESIAN_POINT('',(197.66165,-73.7631,1.585)); +#211804 = VECTOR('',#211805,1.); +#211805 = DIRECTION('',(0.,-1.,0.)); +#211806 = ORIENTED_EDGE('',*,*,#211807,.T.); +#211807 = EDGE_CURVE('',#211800,#211808,#211810,.T.); +#211808 = VERTEX_POINT('',#211809); +#211809 = CARTESIAN_POINT('',(197.54165,-74.8231,1.585)); +#211810 = CIRCLE('',#211811,6.000000000042E-02); +#211811 = AXIS2_PLACEMENT_3D('',#211812,#211813,#211814); +#211812 = CARTESIAN_POINT('',(197.60165,-74.82310022558,1.585)); +#211813 = DIRECTION('',(0.,0.,-1.)); +#211814 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#211815 = ORIENTED_EDGE('',*,*,#211816,.T.); +#211816 = EDGE_CURVE('',#211808,#211817,#211819,.T.); +#211817 = VERTEX_POINT('',#211818); +#211818 = CARTESIAN_POINT('',(197.54165,-73.8231,1.585)); +#211819 = LINE('',#211820,#211821); +#211820 = CARTESIAN_POINT('',(197.54165,-74.8231,1.585)); +#211821 = VECTOR('',#211822,1.); +#211822 = DIRECTION('',(0.,1.,0.)); +#211823 = ORIENTED_EDGE('',*,*,#211824,.T.); +#211824 = EDGE_CURVE('',#211817,#211772,#211825,.T.); +#211825 = LINE('',#211826,#211827); +#211826 = CARTESIAN_POINT('',(197.54165,-73.8231,1.585)); +#211827 = VECTOR('',#211828,1.); +#211828 = DIRECTION('',(-1.,0.,0.)); +#211829 = PLANE('',#211830); +#211830 = AXIS2_PLACEMENT_3D('',#211831,#211832,#211833); +#211831 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211832 = DIRECTION('',(0.,0.,1.)); +#211833 = DIRECTION('',(1.,0.,-0.)); +#211834 = SHELL_BASED_SURFACE_MODEL('',(#211835)); +#211835 = OPEN_SHELL('',(#211836)); +#211836 = ADVANCED_FACE('',(#211837),#211898,.T.); +#211837 = FACE_BOUND('',#211838,.F.); +#211838 = EDGE_LOOP('',(#211839,#211850,#211858,#211867,#211875,#211883, + #211892)); +#211839 = ORIENTED_EDGE('',*,*,#211840,.T.); +#211840 = EDGE_CURVE('',#211841,#211843,#211845,.T.); +#211841 = VERTEX_POINT('',#211842); +#211842 = CARTESIAN_POINT('',(105.80165,-72.7731,1.585)); +#211843 = VERTEX_POINT('',#211844); +#211844 = CARTESIAN_POINT('',(105.86165,-72.7131,1.585)); +#211845 = CIRCLE('',#211846,5.999932016263E-02); +#211846 = AXIS2_PLACEMENT_3D('',#211847,#211848,#211849); +#211847 = CARTESIAN_POINT('',(105.86164932015,-72.77309932015,1.585)); +#211848 = DIRECTION('',(0.,0.,-1.)); +#211849 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#211850 = ORIENTED_EDGE('',*,*,#211851,.T.); +#211851 = EDGE_CURVE('',#211843,#211852,#211854,.T.); +#211852 = VERTEX_POINT('',#211853); +#211853 = CARTESIAN_POINT('',(107.19165,-72.7131,1.585)); +#211854 = LINE('',#211855,#211856); +#211855 = CARTESIAN_POINT('',(105.86165,-72.7131,1.585)); +#211856 = VECTOR('',#211857,1.); +#211857 = DIRECTION('',(1.,0.,0.)); +#211858 = ORIENTED_EDGE('',*,*,#211859,.T.); +#211859 = EDGE_CURVE('',#211852,#211860,#211862,.T.); +#211860 = VERTEX_POINT('',#211861); +#211861 = CARTESIAN_POINT('',(107.19165,-72.8331,1.585)); +#211862 = CIRCLE('',#211863,6.000000000042E-02); +#211863 = AXIS2_PLACEMENT_3D('',#211864,#211865,#211866); +#211864 = CARTESIAN_POINT('',(107.19165022558,-72.7731,1.585)); +#211865 = DIRECTION('',(0.,0.,-1.)); +#211866 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#211867 = ORIENTED_EDGE('',*,*,#211868,.T.); +#211868 = EDGE_CURVE('',#211860,#211869,#211871,.T.); +#211869 = VERTEX_POINT('',#211870); +#211870 = CARTESIAN_POINT('',(105.92165,-72.8331,1.585)); +#211871 = LINE('',#211872,#211873); +#211872 = CARTESIAN_POINT('',(107.19165,-72.8331,1.585)); +#211873 = VECTOR('',#211874,1.); +#211874 = DIRECTION('',(-1.,0.,0.)); +#211875 = ORIENTED_EDGE('',*,*,#211876,.T.); +#211876 = EDGE_CURVE('',#211869,#211877,#211879,.T.); +#211877 = VERTEX_POINT('',#211878); +#211878 = CARTESIAN_POINT('',(105.92165,-74.1031,1.585)); +#211879 = LINE('',#211880,#211881); +#211880 = CARTESIAN_POINT('',(105.92165,-72.8331,1.585)); +#211881 = VECTOR('',#211882,1.); +#211882 = DIRECTION('',(0.,-1.,0.)); +#211883 = ORIENTED_EDGE('',*,*,#211884,.T.); +#211884 = EDGE_CURVE('',#211877,#211885,#211887,.T.); +#211885 = VERTEX_POINT('',#211886); +#211886 = CARTESIAN_POINT('',(105.80165,-74.1031,1.585)); +#211887 = CIRCLE('',#211888,6.000000000042E-02); +#211888 = AXIS2_PLACEMENT_3D('',#211889,#211890,#211891); +#211889 = CARTESIAN_POINT('',(105.86165,-74.10310022558,1.585)); +#211890 = DIRECTION('',(0.,0.,-1.)); +#211891 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#211892 = ORIENTED_EDGE('',*,*,#211893,.T.); +#211893 = EDGE_CURVE('',#211885,#211841,#211894,.T.); +#211894 = LINE('',#211895,#211896); +#211895 = CARTESIAN_POINT('',(105.80165,-74.1031,1.585)); +#211896 = VECTOR('',#211897,1.); +#211897 = DIRECTION('',(0.,1.,0.)); +#211898 = PLANE('',#211899); +#211899 = AXIS2_PLACEMENT_3D('',#211900,#211901,#211902); +#211900 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211901 = DIRECTION('',(0.,0.,1.)); +#211902 = DIRECTION('',(1.,0.,-0.)); +#211903 = SHELL_BASED_SURFACE_MODEL('',(#211904)); +#211904 = OPEN_SHELL('',(#211905)); +#211905 = ADVANCED_FACE('',(#211906),#212081,.T.); +#211906 = FACE_BOUND('',#211907,.F.); +#211907 = EDGE_LOOP('',(#211908,#211918,#211926,#211934,#211942,#211950, + #211959,#211967,#211976,#211984,#211992,#212000,#212008,#212016, + #212025,#212033,#212041,#212049,#212058,#212066,#212075)); +#211908 = ORIENTED_EDGE('',*,*,#211909,.T.); +#211909 = EDGE_CURVE('',#211910,#211912,#211914,.T.); +#211910 = VERTEX_POINT('',#211911); +#211911 = CARTESIAN_POINT('',(103.931866,-73.420934,1.585)); +#211912 = VERTEX_POINT('',#211913); +#211913 = CARTESIAN_POINT('',(104.052313,-73.362874,1.585)); +#211914 = LINE('',#211915,#211916); +#211915 = CARTESIAN_POINT('',(103.931866,-73.420934,1.585)); +#211916 = VECTOR('',#211917,1.); +#211917 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#211918 = ORIENTED_EDGE('',*,*,#211919,.T.); +#211919 = EDGE_CURVE('',#211912,#211920,#211922,.T.); +#211920 = VERTEX_POINT('',#211921); +#211921 = CARTESIAN_POINT('',(104.169588,-73.362162,1.585)); +#211922 = LINE('',#211923,#211924); +#211923 = CARTESIAN_POINT('',(104.052313,-73.362874,1.585)); +#211924 = VECTOR('',#211925,1.); +#211925 = DIRECTION('',(0.999981570774,6.071088283078E-03,0.)); +#211926 = ORIENTED_EDGE('',*,*,#211927,.T.); +#211927 = EDGE_CURVE('',#211920,#211928,#211930,.T.); +#211928 = VERTEX_POINT('',#211929); +#211929 = CARTESIAN_POINT('',(104.346708,-73.421692,1.585)); +#211930 = LINE('',#211931,#211932); +#211931 = CARTESIAN_POINT('',(104.169588,-73.362162,1.585)); +#211932 = VECTOR('',#211933,1.); +#211933 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#211934 = ORIENTED_EDGE('',*,*,#211935,.T.); +#211935 = EDGE_CURVE('',#211928,#211936,#211938,.T.); +#211936 = VERTEX_POINT('',#211937); +#211937 = CARTESIAN_POINT('',(104.801469,-73.874414,1.585)); +#211938 = LINE('',#211939,#211940); +#211939 = CARTESIAN_POINT('',(104.346708,-73.421692,1.585)); +#211940 = VECTOR('',#211941,1.); +#211941 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#211942 = ORIENTED_EDGE('',*,*,#211943,.T.); +#211943 = EDGE_CURVE('',#211936,#211944,#211946,.T.); +#211944 = VERTEX_POINT('',#211945); +#211945 = CARTESIAN_POINT('',(104.80291,-73.421801,1.585)); +#211946 = LINE('',#211947,#211948); +#211947 = CARTESIAN_POINT('',(104.801469,-73.874414,1.585)); +#211948 = VECTOR('',#211949,1.); +#211949 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#211950 = ORIENTED_EDGE('',*,*,#211951,.T.); +#211951 = EDGE_CURVE('',#211944,#211952,#211954,.T.); +#211952 = VERTEX_POINT('',#211953); +#211953 = CARTESIAN_POINT('',(104.951469,-73.436433,1.585)); +#211954 = CIRCLE('',#211955,7.500006711465E-02); +#211955 = AXIS2_PLACEMENT_3D('',#211956,#211957,#211958); +#211956 = CARTESIAN_POINT('',(104.87646893288,-73.43643293288,1.585)); +#211957 = DIRECTION('',(0.,0.,-1.)); +#211958 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#211959 = ORIENTED_EDGE('',*,*,#211960,.T.); +#211960 = EDGE_CURVE('',#211952,#211961,#211963,.T.); +#211961 = VERTEX_POINT('',#211962); +#211962 = CARTESIAN_POINT('',(104.950028,-74.070112,1.585)); +#211963 = LINE('',#211964,#211965); +#211964 = CARTESIAN_POINT('',(104.951469,-73.436433,1.585)); +#211965 = VECTOR('',#211966,1.); +#211966 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#211967 = ORIENTED_EDGE('',*,*,#211968,.T.); +#211968 = EDGE_CURVE('',#211961,#211969,#211971,.T.); +#211969 = VERTEX_POINT('',#211970); +#211970 = CARTESIAN_POINT('',(104.891101,-74.129039,1.585)); +#211971 = CIRCLE('',#211972,7.499663284019E-02); +#211972 = AXIS2_PLACEMENT_3D('',#211973,#211974,#211975); +#211973 = CARTESIAN_POINT('',(104.87647198775,-74.05548298775,1.585)); +#211974 = DIRECTION('',(0.,0.,-1.)); +#211975 = DIRECTION('',(0.980790863048,-0.195062254064,0.)); +#211976 = ORIENTED_EDGE('',*,*,#211977,.T.); +#211977 = EDGE_CURVE('',#211969,#211978,#211980,.T.); +#211978 = VERTEX_POINT('',#211979); +#211979 = CARTESIAN_POINT('',(104.853918,-74.125759,1.585)); +#211980 = LINE('',#211981,#211982); +#211981 = CARTESIAN_POINT('',(104.891101,-74.129039,1.585)); +#211982 = VECTOR('',#211983,1.); +#211983 = DIRECTION('',(-0.996131850392,8.78711365218E-02,0.)); +#211984 = ORIENTED_EDGE('',*,*,#211985,.T.); +#211985 = EDGE_CURVE('',#211978,#211986,#211988,.T.); +#211986 = VERTEX_POINT('',#211987); +#211987 = CARTESIAN_POINT('',(104.823436,-74.108513,1.585)); +#211988 = LINE('',#211989,#211990); +#211989 = CARTESIAN_POINT('',(104.853918,-74.125759,1.585)); +#211990 = VECTOR('',#211991,1.); +#211991 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#211992 = ORIENTED_EDGE('',*,*,#211993,.T.); +#211993 = EDGE_CURVE('',#211986,#211994,#211996,.T.); +#211994 = VERTEX_POINT('',#211995); +#211995 = CARTESIAN_POINT('',(104.264526,-73.549604,1.585)); +#211996 = LINE('',#211997,#211998); +#211997 = CARTESIAN_POINT('',(104.823436,-74.108513,1.585)); +#211998 = VECTOR('',#211999,1.); +#211999 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#212000 = ORIENTED_EDGE('',*,*,#212001,.T.); +#212001 = EDGE_CURVE('',#211994,#212002,#212004,.T.); +#212002 = VERTEX_POINT('',#212003); +#212003 = CARTESIAN_POINT('',(104.150013,-73.511433,1.585)); +#212004 = LINE('',#212005,#212006); +#212005 = CARTESIAN_POINT('',(104.264526,-73.549604,1.585)); +#212006 = VECTOR('',#212007,1.); +#212007 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#212008 = ORIENTED_EDGE('',*,*,#212009,.T.); +#212009 = EDGE_CURVE('',#212002,#212010,#212012,.T.); +#212010 = VERTEX_POINT('',#212011); +#212011 = CARTESIAN_POINT('',(104.08465,-73.511433,1.585)); +#212012 = LINE('',#212013,#212014); +#212013 = CARTESIAN_POINT('',(104.150013,-73.511433,1.585)); +#212014 = VECTOR('',#212015,1.); +#212015 = DIRECTION('',(-1.,0.,0.)); +#212016 = ORIENTED_EDGE('',*,*,#212017,.T.); +#212017 = EDGE_CURVE('',#212010,#212018,#212020,.T.); +#212018 = VERTEX_POINT('',#212019); +#212019 = CARTESIAN_POINT('',(103.951469,-73.644614,1.585)); +#212020 = CIRCLE('',#212021,0.18686440374); +#212021 = AXIS2_PLACEMENT_3D('',#212022,#212023,#212024); +#212022 = CARTESIAN_POINT('',(104.132186,-73.69215,1.585)); +#212023 = DIRECTION('',(0.,0.,1.)); +#212024 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#212025 = ORIENTED_EDGE('',*,*,#212026,.T.); +#212026 = EDGE_CURVE('',#212018,#212027,#212029,.T.); +#212027 = VERTEX_POINT('',#212028); +#212028 = CARTESIAN_POINT('',(103.951469,-73.847299,1.585)); +#212029 = LINE('',#212030,#212031); +#212030 = CARTESIAN_POINT('',(103.951469,-73.644614,1.585)); +#212031 = VECTOR('',#212032,1.); +#212032 = DIRECTION('',(0.,-1.,0.)); +#212033 = ORIENTED_EDGE('',*,*,#212034,.T.); +#212034 = EDGE_CURVE('',#212027,#212035,#212037,.T.); +#212035 = VERTEX_POINT('',#212036); +#212036 = CARTESIAN_POINT('',(103.985727,-73.915815,1.585)); +#212037 = LINE('',#212038,#212039); +#212038 = CARTESIAN_POINT('',(103.951469,-73.847299,1.585)); +#212039 = VECTOR('',#212040,1.); +#212040 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#212041 = ORIENTED_EDGE('',*,*,#212042,.T.); +#212042 = EDGE_CURVE('',#212035,#212043,#212045,.T.); +#212043 = VERTEX_POINT('',#212044); +#212044 = CARTESIAN_POINT('',(104.034067,-73.966193,1.585)); +#212045 = LINE('',#212046,#212047); +#212046 = CARTESIAN_POINT('',(103.985727,-73.915815,1.585)); +#212047 = VECTOR('',#212048,1.); +#212048 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#212049 = ORIENTED_EDGE('',*,*,#212050,.T.); +#212050 = EDGE_CURVE('',#212043,#212051,#212053,.T.); +#212051 = VERTEX_POINT('',#212052); +#212052 = CARTESIAN_POINT('',(103.918674,-74.060894,1.585)); +#212053 = CIRCLE('',#212054,7.500003178656E-02); +#212054 = AXIS2_PLACEMENT_3D('',#212055,#212056,#212057); +#212055 = CARTESIAN_POINT('',(103.97170656212,-74.0078605,1.585)); +#212056 = DIRECTION('',(0.,0.,-1.)); +#212057 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#212058 = ORIENTED_EDGE('',*,*,#212059,.T.); +#212059 = EDGE_CURVE('',#212051,#212060,#212062,.T.); +#212060 = VERTEX_POINT('',#212061); +#212061 = CARTESIAN_POINT('',(103.857006,-73.993783,1.585)); +#212062 = LINE('',#212063,#212064); +#212063 = CARTESIAN_POINT('',(103.918674,-74.060894,1.585)); +#212064 = VECTOR('',#212065,1.); +#212065 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#212066 = ORIENTED_EDGE('',*,*,#212067,.T.); +#212067 = EDGE_CURVE('',#212060,#212068,#212070,.T.); +#212068 = VERTEX_POINT('',#212069); +#212069 = CARTESIAN_POINT('',(103.866336,-73.484387,1.585)); +#212070 = CIRCLE('',#212071,0.450051227017); +#212071 = AXIS2_PLACEMENT_3D('',#212072,#212073,#212074); +#212072 = CARTESIAN_POINT('',(104.23262532415,-73.74587932866,1.585)); +#212073 = DIRECTION('',(0.,0.,-1.)); +#212074 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#212075 = ORIENTED_EDGE('',*,*,#212076,.T.); +#212076 = EDGE_CURVE('',#212068,#211910,#212077,.T.); +#212077 = LINE('',#212078,#212079); +#212078 = CARTESIAN_POINT('',(103.866336,-73.484387,1.585)); +#212079 = VECTOR('',#212080,1.); +#212080 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#212081 = PLANE('',#212082); +#212082 = AXIS2_PLACEMENT_3D('',#212083,#212084,#212085); +#212083 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212084 = DIRECTION('',(0.,0.,1.)); +#212085 = DIRECTION('',(1.,0.,-0.)); +#212086 = SHELL_BASED_SURFACE_MODEL('',(#212087)); +#212087 = OPEN_SHELL('',(#212088)); +#212088 = ADVANCED_FACE('',(#212089),#212125,.T.); +#212089 = FACE_BOUND('',#212090,.F.); +#212090 = EDGE_LOOP('',(#212091,#212102,#212110,#212119)); +#212091 = ORIENTED_EDGE('',*,*,#212092,.T.); +#212092 = EDGE_CURVE('',#212093,#212095,#212097,.T.); +#212093 = VERTEX_POINT('',#212094); +#212094 = CARTESIAN_POINT('',(101.129392,-73.8606,1.585)); +#212095 = VERTEX_POINT('',#212096); +#212096 = CARTESIAN_POINT('',(101.129392,-73.7406,1.585)); +#212097 = CIRCLE('',#212098,6.000000000042E-02); +#212098 = AXIS2_PLACEMENT_3D('',#212099,#212100,#212101); +#212099 = CARTESIAN_POINT('',(101.12939177441,-73.8006,1.585)); +#212100 = DIRECTION('',(0.,0.,-1.)); +#212101 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#212102 = ORIENTED_EDGE('',*,*,#212103,.T.); +#212103 = EDGE_CURVE('',#212095,#212104,#212106,.T.); +#212104 = VERTEX_POINT('',#212105); +#212105 = CARTESIAN_POINT('',(101.603908,-73.7406,1.585)); +#212106 = LINE('',#212107,#212108); +#212107 = CARTESIAN_POINT('',(101.129392,-73.7406,1.585)); +#212108 = VECTOR('',#212109,1.); +#212109 = DIRECTION('',(1.,0.,0.)); +#212110 = ORIENTED_EDGE('',*,*,#212111,.T.); +#212111 = EDGE_CURVE('',#212104,#212112,#212114,.T.); +#212112 = VERTEX_POINT('',#212113); +#212113 = CARTESIAN_POINT('',(101.603908,-73.8606,1.585)); +#212114 = CIRCLE('',#212115,6.000000000043E-02); +#212115 = AXIS2_PLACEMENT_3D('',#212116,#212117,#212118); +#212116 = CARTESIAN_POINT('',(101.60390822558,-73.8006,1.585)); +#212117 = DIRECTION('',(0.,0.,-1.)); +#212118 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#212119 = ORIENTED_EDGE('',*,*,#212120,.T.); +#212120 = EDGE_CURVE('',#212112,#212093,#212121,.T.); +#212121 = LINE('',#212122,#212123); +#212122 = CARTESIAN_POINT('',(101.603908,-73.8606,1.585)); +#212123 = VECTOR('',#212124,1.); +#212124 = DIRECTION('',(-1.,0.,0.)); +#212125 = PLANE('',#212126); +#212126 = AXIS2_PLACEMENT_3D('',#212127,#212128,#212129); +#212127 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212128 = DIRECTION('',(0.,0.,1.)); +#212129 = DIRECTION('',(1.,0.,-0.)); +#212130 = SHELL_BASED_SURFACE_MODEL('',(#212131)); +#212131 = OPEN_SHELL('',(#212132)); +#212132 = ADVANCED_FACE('',(#212133),#212202,.T.); +#212133 = FACE_BOUND('',#212134,.F.); +#212134 = EDGE_LOOP('',(#212135,#212146,#212154,#212162,#212171,#212179, + #212188,#212196)); +#212135 = ORIENTED_EDGE('',*,*,#212136,.T.); +#212136 = EDGE_CURVE('',#212137,#212139,#212141,.T.); +#212137 = VERTEX_POINT('',#212138); +#212138 = CARTESIAN_POINT('',(207.361217,-72.400139,1.585)); +#212139 = VERTEX_POINT('',#212140); +#212140 = CARTESIAN_POINT('',(207.47665,-72.4231,1.585)); +#212141 = CIRCLE('',#212142,6.000007318647E-02); +#212142 = AXIS2_PLACEMENT_3D('',#212143,#212144,#212145); +#212143 = CARTESIAN_POINT('',(207.41664992681,-72.42309982331,1.585)); +#212144 = DIRECTION('',(0.,0.,-1.)); +#212145 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#212146 = ORIENTED_EDGE('',*,*,#212147,.T.); +#212147 = EDGE_CURVE('',#212139,#212148,#212150,.T.); +#212148 = VERTEX_POINT('',#212149); +#212149 = CARTESIAN_POINT('',(207.47665,-73.6131,1.585)); +#212150 = LINE('',#212151,#212152); +#212151 = CARTESIAN_POINT('',(207.47665,-72.4231,1.585)); +#212152 = VECTOR('',#212153,1.); +#212153 = DIRECTION('',(0.,-1.,0.)); +#212154 = ORIENTED_EDGE('',*,*,#212155,.T.); +#212155 = EDGE_CURVE('',#212148,#212156,#212158,.T.); +#212156 = VERTEX_POINT('',#212157); +#212157 = CARTESIAN_POINT('',(208.66665,-73.6131,1.585)); +#212158 = LINE('',#212159,#212160); +#212159 = CARTESIAN_POINT('',(207.47665,-73.6131,1.585)); +#212160 = VECTOR('',#212161,1.); +#212161 = DIRECTION('',(1.,0.,0.)); +#212162 = ORIENTED_EDGE('',*,*,#212163,.T.); +#212163 = EDGE_CURVE('',#212156,#212164,#212166,.T.); +#212164 = VERTEX_POINT('',#212165); +#212165 = CARTESIAN_POINT('',(208.66665,-73.7331,1.585)); +#212166 = CIRCLE('',#212167,6.000000000042E-02); +#212167 = AXIS2_PLACEMENT_3D('',#212168,#212169,#212170); +#212168 = CARTESIAN_POINT('',(208.66665022558,-73.6731,1.585)); +#212169 = DIRECTION('',(0.,0.,-1.)); +#212170 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#212171 = ORIENTED_EDGE('',*,*,#212172,.T.); +#212172 = EDGE_CURVE('',#212164,#212173,#212175,.T.); +#212173 = VERTEX_POINT('',#212174); +#212174 = CARTESIAN_POINT('',(207.41665,-73.7331,1.585)); +#212175 = LINE('',#212176,#212177); +#212176 = CARTESIAN_POINT('',(208.66665,-73.7331,1.585)); +#212177 = VECTOR('',#212178,1.); +#212178 = DIRECTION('',(-1.,0.,0.)); +#212179 = ORIENTED_EDGE('',*,*,#212180,.T.); +#212180 = EDGE_CURVE('',#212173,#212181,#212183,.T.); +#212181 = VERTEX_POINT('',#212182); +#212182 = CARTESIAN_POINT('',(207.35665,-73.6731,1.585)); +#212183 = CIRCLE('',#212184,5.999932016257E-02); +#212184 = AXIS2_PLACEMENT_3D('',#212185,#212186,#212187); +#212185 = CARTESIAN_POINT('',(207.41664932015,-73.67310067984,1.585)); +#212186 = DIRECTION('',(0.,0.,-1.)); +#212187 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#212188 = ORIENTED_EDGE('',*,*,#212189,.T.); +#212189 = EDGE_CURVE('',#212181,#212190,#212192,.T.); +#212190 = VERTEX_POINT('',#212191); +#212191 = CARTESIAN_POINT('',(207.35665,-72.4231,1.585)); +#212192 = LINE('',#212193,#212194); +#212193 = CARTESIAN_POINT('',(207.35665,-73.6731,1.585)); +#212194 = VECTOR('',#212195,1.); +#212195 = DIRECTION('',(0.,1.,0.)); +#212196 = ORIENTED_EDGE('',*,*,#212197,.T.); +#212197 = EDGE_CURVE('',#212190,#212137,#212198,.T.); +#212198 = LINE('',#212199,#212200); +#212199 = CARTESIAN_POINT('',(207.35665,-72.4231,1.585)); +#212200 = VECTOR('',#212201,1.); +#212201 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#212202 = PLANE('',#212203); +#212203 = AXIS2_PLACEMENT_3D('',#212204,#212205,#212206); +#212204 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212205 = DIRECTION('',(0.,0.,1.)); +#212206 = DIRECTION('',(1.,0.,-0.)); +#212207 = SHELL_BASED_SURFACE_MODEL('',(#212208)); +#212208 = OPEN_SHELL('',(#212209)); +#212209 = ADVANCED_FACE('',(#212210,#212375),#212442,.T.); +#212210 = FACE_BOUND('',#212211,.F.); +#212211 = EDGE_LOOP('',(#212212,#212222,#212230,#212238,#212246,#212254, + #212262,#212270,#212278,#212286,#212295,#212303,#212311,#212319, + #212328,#212336,#212345,#212353,#212361,#212369)); +#212212 = ORIENTED_EDGE('',*,*,#212213,.T.); +#212213 = EDGE_CURVE('',#212214,#212216,#212218,.T.); +#212214 = VERTEX_POINT('',#212215); +#212215 = CARTESIAN_POINT('',(185.164351,-72.456715,1.585)); +#212216 = VERTEX_POINT('',#212217); +#212217 = CARTESIAN_POINT('',(185.346108,-72.367005,1.585)); +#212218 = LINE('',#212219,#212220); +#212219 = CARTESIAN_POINT('',(185.164351,-72.456715,1.585)); +#212220 = VECTOR('',#212221,1.); +#212221 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#212222 = ORIENTED_EDGE('',*,*,#212223,.T.); +#212223 = EDGE_CURVE('',#212216,#212224,#212226,.T.); +#212224 = VERTEX_POINT('',#212225); +#212225 = CARTESIAN_POINT('',(185.375162,-72.363098,1.585)); +#212226 = LINE('',#212227,#212228); +#212227 = CARTESIAN_POINT('',(185.346108,-72.367005,1.585)); +#212228 = VECTOR('',#212229,1.); +#212229 = DIRECTION('',(0.991079213316,0.13327412702,0.)); +#212230 = ORIENTED_EDGE('',*,*,#212231,.T.); +#212231 = EDGE_CURVE('',#212224,#212232,#212234,.T.); +#212232 = VERTEX_POINT('',#212233); +#212233 = CARTESIAN_POINT('',(185.625193,-72.365212,1.585)); +#212234 = LINE('',#212235,#212236); +#212235 = CARTESIAN_POINT('',(185.375162,-72.363098,1.585)); +#212236 = VECTOR('',#212237,1.); +#212237 = DIRECTION('',(0.999964258813,-8.454649396022E-03,0.)); +#212238 = ORIENTED_EDGE('',*,*,#212239,.T.); +#212239 = EDGE_CURVE('',#212232,#212240,#212242,.T.); +#212240 = VERTEX_POINT('',#212241); +#212241 = CARTESIAN_POINT('',(185.652927,-72.374711,1.585)); +#212242 = LINE('',#212243,#212244); +#212243 = CARTESIAN_POINT('',(185.625193,-72.365212,1.585)); +#212244 = VECTOR('',#212245,1.); +#212245 = DIRECTION('',(0.946048457417,-0.324025178373,0.)); +#212246 = ORIENTED_EDGE('',*,*,#212247,.T.); +#212247 = EDGE_CURVE('',#212240,#212248,#212250,.T.); +#212248 = VERTEX_POINT('',#212249); +#212249 = CARTESIAN_POINT('',(185.825457,-72.464582,1.585)); +#212250 = LINE('',#212251,#212252); +#212251 = CARTESIAN_POINT('',(185.652927,-72.374711,1.585)); +#212252 = VECTOR('',#212253,1.); +#212253 = DIRECTION('',(0.886889600195,-0.461981425022,0.)); +#212254 = ORIENTED_EDGE('',*,*,#212255,.T.); +#212255 = EDGE_CURVE('',#212248,#212256,#212258,.T.); +#212256 = VERTEX_POINT('',#212257); +#212257 = CARTESIAN_POINT('',(185.924877,-72.56705,1.585)); +#212258 = LINE('',#212259,#212260); +#212259 = CARTESIAN_POINT('',(185.825457,-72.464582,1.585)); +#212260 = VECTOR('',#212261,1.); +#212261 = DIRECTION('',(0.696351894269,-0.717700522048,0.)); +#212262 = ORIENTED_EDGE('',*,*,#212263,.T.); +#212263 = EDGE_CURVE('',#212256,#212264,#212266,.T.); +#212264 = VERTEX_POINT('',#212265); +#212265 = CARTESIAN_POINT('',(186.014588,-72.748807,1.585)); +#212266 = LINE('',#212267,#212268); +#212267 = CARTESIAN_POINT('',(185.924877,-72.56705,1.585)); +#212268 = VECTOR('',#212269,1.); +#212269 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#212270 = ORIENTED_EDGE('',*,*,#212271,.T.); +#212271 = EDGE_CURVE('',#212264,#212272,#212274,.T.); +#212272 = VERTEX_POINT('',#212273); +#212273 = CARTESIAN_POINT('',(186.018495,-72.795159,1.585)); +#212274 = LINE('',#212275,#212276); +#212275 = CARTESIAN_POINT('',(186.014588,-72.748807,1.585)); +#212276 = VECTOR('',#212277,1.); +#212277 = DIRECTION('',(8.39919390277E-02,-0.996466434045,0.)); +#212278 = ORIENTED_EDGE('',*,*,#212279,.T.); +#212279 = EDGE_CURVE('',#212272,#212280,#212282,.T.); +#212280 = VERTEX_POINT('',#212281); +#212281 = CARTESIAN_POINT('',(186.626112,-72.372408,1.585)); +#212282 = LINE('',#212283,#212284); +#212283 = CARTESIAN_POINT('',(186.018495,-72.795159,1.585)); +#212284 = VECTOR('',#212285,1.); +#212285 = DIRECTION('',(0.820866622673,0.571119941677,0.)); +#212286 = ORIENTED_EDGE('',*,*,#212287,.T.); +#212287 = EDGE_CURVE('',#212280,#212288,#212290,.T.); +#212288 = VERTEX_POINT('',#212289); +#212289 = CARTESIAN_POINT('',(186.749849,-72.549175,1.585)); +#212290 = CIRCLE('',#212291,0.109999480258); +#212291 = AXIS2_PLACEMENT_3D('',#212292,#212293,#212294); +#212292 = CARTESIAN_POINT('',(186.67039979352,-72.47309800447,1.585)); +#212293 = DIRECTION('',(0.,0.,-1.)); +#212294 = DIRECTION('',(-0.402618207135,0.915368002108,0.)); +#212295 = ORIENTED_EDGE('',*,*,#212296,.T.); +#212296 = EDGE_CURVE('',#212288,#212297,#212299,.T.); +#212297 = VERTEX_POINT('',#212298); +#212298 = CARTESIAN_POINT('',(186.018495,-73.063703,1.585)); +#212299 = LINE('',#212300,#212301); +#212300 = CARTESIAN_POINT('',(186.749849,-72.549175,1.585)); +#212301 = VECTOR('',#212302,1.); +#212302 = DIRECTION('',(-0.817874055485,-0.575397279594,0.)); +#212303 = ORIENTED_EDGE('',*,*,#212304,.T.); +#212304 = EDGE_CURVE('',#212297,#212305,#212307,.T.); +#212305 = VERTEX_POINT('',#212306); +#212306 = CARTESIAN_POINT('',(186.018495,-73.277384,1.585)); +#212307 = LINE('',#212308,#212309); +#212308 = CARTESIAN_POINT('',(186.018495,-73.063703,1.585)); +#212309 = VECTOR('',#212310,1.); +#212310 = DIRECTION('',(0.,-1.,0.)); +#212311 = ORIENTED_EDGE('',*,*,#212312,.T.); +#212312 = EDGE_CURVE('',#212305,#212313,#212315,.T.); +#212313 = VERTEX_POINT('',#212314); +#212314 = CARTESIAN_POINT('',(186.69186,-73.279498,1.585)); +#212315 = LINE('',#212316,#212317); +#212316 = CARTESIAN_POINT('',(186.018495,-73.277384,1.585)); +#212317 = VECTOR('',#212318,1.); +#212318 = DIRECTION('',(0.999995071943,-3.139440841289E-03,0.)); +#212319 = ORIENTED_EDGE('',*,*,#212320,.T.); +#212320 = EDGE_CURVE('',#212313,#212321,#212323,.T.); +#212321 = VERTEX_POINT('',#212322); +#212322 = CARTESIAN_POINT('',(186.69186,-73.49527,1.585)); +#212323 = CIRCLE('',#212324,0.109999639072); +#212324 = AXIS2_PLACEMENT_3D('',#212325,#212326,#212327); +#212325 = CARTESIAN_POINT('',(186.6704,-73.387384,1.585)); +#212326 = DIRECTION('',(0.,0.,-1.)); +#212327 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#212328 = ORIENTED_EDGE('',*,*,#212329,.T.); +#212329 = EDGE_CURVE('',#212321,#212330,#212332,.T.); +#212330 = VERTEX_POINT('',#212331); +#212331 = CARTESIAN_POINT('',(185.04894,-73.49527,1.585)); +#212332 = LINE('',#212333,#212334); +#212333 = CARTESIAN_POINT('',(186.69186,-73.49527,1.585)); +#212334 = VECTOR('',#212335,1.); +#212335 = DIRECTION('',(-1.,0.,0.)); +#212336 = ORIENTED_EDGE('',*,*,#212337,.T.); +#212337 = EDGE_CURVE('',#212330,#212338,#212340,.T.); +#212338 = VERTEX_POINT('',#212339); +#212339 = CARTESIAN_POINT('',(184.962514,-73.408844,1.585)); +#212340 = CIRCLE('',#212341,0.109995194153); +#212341 = AXIS2_PLACEMENT_3D('',#212342,#212343,#212344); +#212342 = CARTESIAN_POINT('',(185.07039621987,-73.38738778012,1.585)); +#212343 = DIRECTION('',(0.,0.,-1.)); +#212344 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#212345 = ORIENTED_EDGE('',*,*,#212346,.T.); +#212346 = EDGE_CURVE('',#212338,#212347,#212349,.T.); +#212347 = VERTEX_POINT('',#212348); +#212348 = CARTESIAN_POINT('',(184.962514,-72.7564,1.585)); +#212349 = LINE('',#212350,#212351); +#212350 = CARTESIAN_POINT('',(184.962514,-73.408844,1.585)); +#212351 = VECTOR('',#212352,1.); +#212352 = DIRECTION('',(0.,1.,0.)); +#212353 = ORIENTED_EDGE('',*,*,#212354,.T.); +#212354 = EDGE_CURVE('',#212347,#212355,#212357,.T.); +#212355 = VERTEX_POINT('',#212356); +#212356 = CARTESIAN_POINT('',(184.972013,-72.728667,1.585)); +#212357 = LINE('',#212358,#212359); +#212358 = CARTESIAN_POINT('',(184.962514,-72.7564,1.585)); +#212359 = VECTOR('',#212360,1.); +#212360 = DIRECTION('',(0.324035635352,0.946044875797,0.)); +#212361 = ORIENTED_EDGE('',*,*,#212362,.T.); +#212362 = EDGE_CURVE('',#212355,#212363,#212365,.T.); +#212363 = VERTEX_POINT('',#212364); +#212364 = CARTESIAN_POINT('',(185.061884,-72.556134,1.585)); +#212365 = LINE('',#212366,#212367); +#212366 = CARTESIAN_POINT('',(184.972013,-72.728667,1.585)); +#212367 = VECTOR('',#212368,1.); +#212368 = DIRECTION('',(0.461975106506,0.886892891486,0.)); +#212369 = ORIENTED_EDGE('',*,*,#212370,.T.); +#212370 = EDGE_CURVE('',#212363,#212214,#212371,.T.); +#212371 = LINE('',#212372,#212373); +#212372 = CARTESIAN_POINT('',(185.061884,-72.556134,1.585)); +#212373 = VECTOR('',#212374,1.); +#212374 = DIRECTION('',(0.717700626174,0.696351786951,0.)); +#212375 = FACE_BOUND('',#212376,.F.); +#212376 = EDGE_LOOP('',(#212377,#212388,#212396,#212404,#212412,#212420, + #212428,#212436)); +#212377 = ORIENTED_EDGE('',*,*,#212378,.T.); +#212378 = EDGE_CURVE('',#212379,#212381,#212383,.T.); +#212379 = VERTEX_POINT('',#212380); +#212380 = CARTESIAN_POINT('',(185.690955,-72.639693,1.585)); +#212381 = VERTEX_POINT('',#212382); +#212382 = CARTESIAN_POINT('',(185.287938,-72.639693,1.585)); +#212383 = CIRCLE('',#212384,0.330157797413); +#212384 = AXIS2_PLACEMENT_3D('',#212385,#212386,#212387); +#212385 = CARTESIAN_POINT('',(185.4894465,-72.90122406052,1.585)); +#212386 = DIRECTION('',(0.,0.,1.)); +#212387 = DIRECTION('',(0.610339969491,0.792139584696,-0.)); +#212388 = ORIENTED_EDGE('',*,*,#212389,.T.); +#212389 = EDGE_CURVE('',#212381,#212390,#212392,.T.); +#212390 = VERTEX_POINT('',#212391); +#212391 = CARTESIAN_POINT('',(185.236993,-72.690638,1.585)); +#212392 = LINE('',#212393,#212394); +#212393 = CARTESIAN_POINT('',(185.287938,-72.639693,1.585)); +#212394 = VECTOR('',#212395,1.); +#212395 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#212396 = ORIENTED_EDGE('',*,*,#212397,.T.); +#212397 = EDGE_CURVE('',#212390,#212398,#212400,.T.); +#212398 = VERTEX_POINT('',#212399); +#212399 = CARTESIAN_POINT('',(185.1804,-72.803826,1.585)); +#212400 = LINE('',#212401,#212402); +#212401 = CARTESIAN_POINT('',(185.236993,-72.690638,1.585)); +#212402 = VECTOR('',#212403,1.); +#212403 = DIRECTION('',(-0.447207273756,-0.894430351844,0.)); +#212404 = ORIENTED_EDGE('',*,*,#212405,.T.); +#212405 = EDGE_CURVE('',#212398,#212406,#212408,.T.); +#212406 = VERTEX_POINT('',#212407); +#212407 = CARTESIAN_POINT('',(185.1804,-73.277384,1.585)); +#212408 = LINE('',#212409,#212410); +#212409 = CARTESIAN_POINT('',(185.1804,-72.803826,1.585)); +#212410 = VECTOR('',#212411,1.); +#212411 = DIRECTION('',(0.,-1.,0.)); +#212412 = ORIENTED_EDGE('',*,*,#212413,.T.); +#212413 = EDGE_CURVE('',#212406,#212414,#212416,.T.); +#212414 = VERTEX_POINT('',#212415); +#212415 = CARTESIAN_POINT('',(185.798495,-73.277384,1.585)); +#212416 = LINE('',#212417,#212418); +#212417 = CARTESIAN_POINT('',(185.1804,-73.277384,1.585)); +#212418 = VECTOR('',#212419,1.); +#212419 = DIRECTION('',(1.,0.,0.)); +#212420 = ORIENTED_EDGE('',*,*,#212421,.T.); +#212421 = EDGE_CURVE('',#212414,#212422,#212424,.T.); +#212422 = VERTEX_POINT('',#212423); +#212423 = CARTESIAN_POINT('',(185.798495,-72.803826,1.585)); +#212424 = LINE('',#212425,#212426); +#212425 = CARTESIAN_POINT('',(185.798495,-73.277384,1.585)); +#212426 = VECTOR('',#212427,1.); +#212427 = DIRECTION('',(0.,1.,0.)); +#212428 = ORIENTED_EDGE('',*,*,#212429,.T.); +#212429 = EDGE_CURVE('',#212422,#212430,#212432,.T.); +#212430 = VERTEX_POINT('',#212431); +#212431 = CARTESIAN_POINT('',(185.741901,-72.690639,1.585)); +#212432 = LINE('',#212433,#212434); +#212433 = CARTESIAN_POINT('',(185.798495,-72.803826,1.585)); +#212434 = VECTOR('',#212435,1.); +#212435 = DIRECTION('',(-0.447216756375,0.894425610556,0.)); +#212436 = ORIENTED_EDGE('',*,*,#212437,.T.); +#212437 = EDGE_CURVE('',#212430,#212379,#212438,.T.); +#212438 = LINE('',#212439,#212440); +#212439 = CARTESIAN_POINT('',(185.741901,-72.690639,1.585)); +#212440 = VECTOR('',#212441,1.); +#212441 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#212442 = PLANE('',#212443); +#212443 = AXIS2_PLACEMENT_3D('',#212444,#212445,#212446); +#212444 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212445 = DIRECTION('',(0.,0.,1.)); +#212446 = DIRECTION('',(1.,0.,-0.)); +#212447 = SHELL_BASED_SURFACE_MODEL('',(#212448)); +#212448 = OPEN_SHELL('',(#212449)); +#212449 = ADVANCED_FACE('',(#212450,#212520,#212704,#212788,#212822, + #212856),#212890,.T.); +#212450 = FACE_BOUND('',#212451,.F.); +#212451 = EDGE_LOOP('',(#212452,#212463,#212471,#212480,#212488,#212497, + #212505,#212514)); +#212452 = ORIENTED_EDGE('',*,*,#212453,.T.); +#212453 = EDGE_CURVE('',#212454,#212456,#212458,.T.); +#212454 = VERTEX_POINT('',#212455); +#212455 = CARTESIAN_POINT('',(207.64665,-65.7631,1.585)); +#212456 = VERTEX_POINT('',#212457); +#212457 = CARTESIAN_POINT('',(207.70665,-65.7031,1.585)); +#212458 = CIRCLE('',#212459,5.999932016262E-02); +#212459 = AXIS2_PLACEMENT_3D('',#212460,#212461,#212462); +#212460 = CARTESIAN_POINT('',(207.70664932015,-65.76309932015,1.585)); +#212461 = DIRECTION('',(0.,0.,-1.)); +#212462 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#212463 = ORIENTED_EDGE('',*,*,#212464,.T.); +#212464 = EDGE_CURVE('',#212456,#212465,#212467,.T.); +#212465 = VERTEX_POINT('',#212466); +#212466 = CARTESIAN_POINT('',(213.67665,-65.7031,1.585)); +#212467 = LINE('',#212468,#212469); +#212468 = CARTESIAN_POINT('',(207.70665,-65.7031,1.585)); +#212469 = VECTOR('',#212470,1.); +#212470 = DIRECTION('',(1.,0.,0.)); +#212471 = ORIENTED_EDGE('',*,*,#212472,.T.); +#212472 = EDGE_CURVE('',#212465,#212473,#212475,.T.); +#212473 = VERTEX_POINT('',#212474); +#212474 = CARTESIAN_POINT('',(213.73665,-65.7631,1.585)); +#212475 = CIRCLE('',#212476,5.999932016257E-02); +#212476 = AXIS2_PLACEMENT_3D('',#212477,#212478,#212479); +#212477 = CARTESIAN_POINT('',(213.67665067984,-65.76309932015,1.585)); +#212478 = DIRECTION('',(0.,0.,-1.)); +#212479 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#212480 = ORIENTED_EDGE('',*,*,#212481,.T.); +#212481 = EDGE_CURVE('',#212473,#212482,#212484,.T.); +#212482 = VERTEX_POINT('',#212483); +#212483 = CARTESIAN_POINT('',(213.73665,-73.3831,1.585)); +#212484 = LINE('',#212485,#212486); +#212485 = CARTESIAN_POINT('',(213.73665,-65.7631,1.585)); +#212486 = VECTOR('',#212487,1.); +#212487 = DIRECTION('',(0.,-1.,0.)); +#212488 = ORIENTED_EDGE('',*,*,#212489,.T.); +#212489 = EDGE_CURVE('',#212482,#212490,#212492,.T.); +#212490 = VERTEX_POINT('',#212491); +#212491 = CARTESIAN_POINT('',(213.67665,-73.4431,1.585)); +#212492 = CIRCLE('',#212493,5.999932016265E-02); +#212493 = AXIS2_PLACEMENT_3D('',#212494,#212495,#212496); +#212494 = CARTESIAN_POINT('',(213.67665067984,-73.38310067984,1.585)); +#212495 = DIRECTION('',(0.,0.,-1.)); +#212496 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#212497 = ORIENTED_EDGE('',*,*,#212498,.T.); +#212498 = EDGE_CURVE('',#212490,#212499,#212501,.T.); +#212499 = VERTEX_POINT('',#212500); +#212500 = CARTESIAN_POINT('',(207.70665,-73.4431,1.585)); +#212501 = LINE('',#212502,#212503); +#212502 = CARTESIAN_POINT('',(213.67665,-73.4431,1.585)); +#212503 = VECTOR('',#212504,1.); +#212504 = DIRECTION('',(-1.,0.,0.)); +#212505 = ORIENTED_EDGE('',*,*,#212506,.T.); +#212506 = EDGE_CURVE('',#212499,#212507,#212509,.T.); +#212507 = VERTEX_POINT('',#212508); +#212508 = CARTESIAN_POINT('',(207.64665,-73.3831,1.585)); +#212509 = CIRCLE('',#212510,5.999932016256E-02); +#212510 = AXIS2_PLACEMENT_3D('',#212511,#212512,#212513); +#212511 = CARTESIAN_POINT('',(207.70664932015,-73.38310067984,1.585)); +#212512 = DIRECTION('',(0.,0.,-1.)); +#212513 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#212514 = ORIENTED_EDGE('',*,*,#212515,.T.); +#212515 = EDGE_CURVE('',#212507,#212454,#212516,.T.); +#212516 = LINE('',#212517,#212518); +#212517 = CARTESIAN_POINT('',(207.64665,-73.3831,1.585)); +#212518 = VECTOR('',#212519,1.); +#212519 = DIRECTION('',(0.,1.,0.)); +#212520 = FACE_BOUND('',#212521,.F.); +#212521 = EDGE_LOOP('',(#212522,#212533,#212541,#212549,#212557,#212566, + #212574,#212582,#212590,#212599,#212607,#212616,#212624,#212632, + #212640,#212649,#212657,#212665,#212673,#212682,#212690,#212698)); +#212522 = ORIENTED_EDGE('',*,*,#212523,.T.); +#212523 = EDGE_CURVE('',#212524,#212526,#212528,.T.); +#212524 = VERTEX_POINT('',#212525); +#212525 = CARTESIAN_POINT('',(209.96665,-66.5831,1.585)); +#212526 = VERTEX_POINT('',#212527); +#212527 = CARTESIAN_POINT('',(209.90665,-66.5231,1.585)); +#212528 = CIRCLE('',#212529,5.999932016264E-02); +#212529 = AXIS2_PLACEMENT_3D('',#212530,#212531,#212532); +#212530 = CARTESIAN_POINT('',(209.96664932015,-66.52310067984,1.585)); +#212531 = DIRECTION('',(0.,0.,-1.)); +#212532 = DIRECTION('',(1.133081470032E-05,-0.999999999936,0.)); +#212533 = ORIENTED_EDGE('',*,*,#212534,.T.); +#212534 = EDGE_CURVE('',#212526,#212535,#212537,.T.); +#212535 = VERTEX_POINT('',#212536); +#212536 = CARTESIAN_POINT('',(209.90665,-65.8231,1.585)); +#212537 = LINE('',#212538,#212539); +#212538 = CARTESIAN_POINT('',(209.90665,-66.5231,1.585)); +#212539 = VECTOR('',#212540,1.); +#212540 = DIRECTION('',(0.,1.,0.)); +#212541 = ORIENTED_EDGE('',*,*,#212542,.T.); +#212542 = EDGE_CURVE('',#212535,#212543,#212545,.T.); +#212543 = VERTEX_POINT('',#212544); +#212544 = CARTESIAN_POINT('',(208.52665,-65.8231,1.585)); +#212545 = LINE('',#212546,#212547); +#212546 = CARTESIAN_POINT('',(209.90665,-65.8231,1.585)); +#212547 = VECTOR('',#212548,1.); +#212548 = DIRECTION('',(-1.,0.,0.)); +#212549 = ORIENTED_EDGE('',*,*,#212550,.T.); +#212550 = EDGE_CURVE('',#212543,#212551,#212553,.T.); +#212551 = VERTEX_POINT('',#212552); +#212552 = CARTESIAN_POINT('',(208.52665,-67.5731,1.585)); +#212553 = LINE('',#212554,#212555); +#212554 = CARTESIAN_POINT('',(208.52665,-65.8231,1.585)); +#212555 = VECTOR('',#212556,1.); +#212556 = DIRECTION('',(0.,-1.,0.)); +#212557 = ORIENTED_EDGE('',*,*,#212558,.T.); +#212558 = EDGE_CURVE('',#212551,#212559,#212561,.T.); +#212559 = VERTEX_POINT('',#212560); +#212560 = CARTESIAN_POINT('',(208.46665,-67.6331,1.585)); +#212561 = CIRCLE('',#212562,5.999932016251E-02); +#212562 = AXIS2_PLACEMENT_3D('',#212563,#212564,#212565); +#212563 = CARTESIAN_POINT('',(208.46665067984,-67.57310067984,1.585)); +#212564 = DIRECTION('',(0.,0.,-1.)); +#212565 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#212566 = ORIENTED_EDGE('',*,*,#212567,.T.); +#212567 = EDGE_CURVE('',#212559,#212568,#212570,.T.); +#212568 = VERTEX_POINT('',#212569); +#212569 = CARTESIAN_POINT('',(207.76665,-67.6331,1.585)); +#212570 = LINE('',#212571,#212572); +#212571 = CARTESIAN_POINT('',(208.46665,-67.6331,1.585)); +#212572 = VECTOR('',#212573,1.); +#212573 = DIRECTION('',(-1.,0.,0.)); +#212574 = ORIENTED_EDGE('',*,*,#212575,.T.); +#212575 = EDGE_CURVE('',#212568,#212576,#212578,.T.); +#212576 = VERTEX_POINT('',#212577); +#212577 = CARTESIAN_POINT('',(207.76665,-69.0131,1.585)); +#212578 = LINE('',#212579,#212580); +#212579 = CARTESIAN_POINT('',(207.76665,-67.6331,1.585)); +#212580 = VECTOR('',#212581,1.); +#212581 = DIRECTION('',(0.,-1.,0.)); +#212582 = ORIENTED_EDGE('',*,*,#212583,.T.); +#212583 = EDGE_CURVE('',#212576,#212584,#212586,.T.); +#212584 = VERTEX_POINT('',#212585); +#212585 = CARTESIAN_POINT('',(208.46665,-69.0131,1.585)); +#212586 = LINE('',#212587,#212588); +#212587 = CARTESIAN_POINT('',(207.76665,-69.0131,1.585)); +#212588 = VECTOR('',#212589,1.); +#212589 = DIRECTION('',(1.,0.,0.)); +#212590 = ORIENTED_EDGE('',*,*,#212591,.T.); +#212591 = EDGE_CURVE('',#212584,#212592,#212594,.T.); +#212592 = VERTEX_POINT('',#212593); +#212593 = CARTESIAN_POINT('',(208.52665,-69.0731,1.585)); +#212594 = CIRCLE('',#212595,5.999932016262E-02); +#212595 = AXIS2_PLACEMENT_3D('',#212596,#212597,#212598); +#212596 = CARTESIAN_POINT('',(208.46665067984,-69.07309932015,1.585)); +#212597 = DIRECTION('',(0.,0.,-1.)); +#212598 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#212599 = ORIENTED_EDGE('',*,*,#212600,.T.); +#212600 = EDGE_CURVE('',#212592,#212601,#212603,.T.); +#212601 = VERTEX_POINT('',#212602); +#212602 = CARTESIAN_POINT('',(208.52665,-70.0731,1.585)); +#212603 = LINE('',#212604,#212605); +#212604 = CARTESIAN_POINT('',(208.52665,-69.0731,1.585)); +#212605 = VECTOR('',#212606,1.); +#212606 = DIRECTION('',(0.,-1.,0.)); +#212607 = ORIENTED_EDGE('',*,*,#212608,.T.); +#212608 = EDGE_CURVE('',#212601,#212609,#212611,.T.); +#212609 = VERTEX_POINT('',#212610); +#212610 = CARTESIAN_POINT('',(208.46665,-70.1331,1.585)); +#212611 = CIRCLE('',#212612,5.999932016251E-02); +#212612 = AXIS2_PLACEMENT_3D('',#212613,#212614,#212615); +#212613 = CARTESIAN_POINT('',(208.46665067984,-70.07310067984,1.585)); +#212614 = DIRECTION('',(0.,0.,-1.)); +#212615 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#212616 = ORIENTED_EDGE('',*,*,#212617,.T.); +#212617 = EDGE_CURVE('',#212609,#212618,#212620,.T.); +#212618 = VERTEX_POINT('',#212619); +#212619 = CARTESIAN_POINT('',(207.76665,-70.1331,1.585)); +#212620 = LINE('',#212621,#212622); +#212621 = CARTESIAN_POINT('',(208.46665,-70.1331,1.585)); +#212622 = VECTOR('',#212623,1.); +#212623 = DIRECTION('',(-1.,0.,0.)); +#212624 = ORIENTED_EDGE('',*,*,#212625,.T.); +#212625 = EDGE_CURVE('',#212618,#212626,#212628,.T.); +#212626 = VERTEX_POINT('',#212627); +#212627 = CARTESIAN_POINT('',(207.76665,-71.5131,1.585)); +#212628 = LINE('',#212629,#212630); +#212629 = CARTESIAN_POINT('',(207.76665,-70.1331,1.585)); +#212630 = VECTOR('',#212631,1.); +#212631 = DIRECTION('',(0.,-1.,0.)); +#212632 = ORIENTED_EDGE('',*,*,#212633,.T.); +#212633 = EDGE_CURVE('',#212626,#212634,#212636,.T.); +#212634 = VERTEX_POINT('',#212635); +#212635 = CARTESIAN_POINT('',(208.46665,-71.5131,1.585)); +#212636 = LINE('',#212637,#212638); +#212637 = CARTESIAN_POINT('',(207.76665,-71.5131,1.585)); +#212638 = VECTOR('',#212639,1.); +#212639 = DIRECTION('',(1.,0.,0.)); +#212640 = ORIENTED_EDGE('',*,*,#212641,.T.); +#212641 = EDGE_CURVE('',#212634,#212642,#212644,.T.); +#212642 = VERTEX_POINT('',#212643); +#212643 = CARTESIAN_POINT('',(208.52665,-71.5731,1.585)); +#212644 = CIRCLE('',#212645,5.999932016262E-02); +#212645 = AXIS2_PLACEMENT_3D('',#212646,#212647,#212648); +#212646 = CARTESIAN_POINT('',(208.46665067984,-71.57309932015,1.585)); +#212647 = DIRECTION('',(0.,0.,-1.)); +#212648 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#212649 = ORIENTED_EDGE('',*,*,#212650,.T.); +#212650 = EDGE_CURVE('',#212642,#212651,#212653,.T.); +#212651 = VERTEX_POINT('',#212652); +#212652 = CARTESIAN_POINT('',(208.52665,-73.3231,1.585)); +#212653 = LINE('',#212654,#212655); +#212654 = CARTESIAN_POINT('',(208.52665,-71.5731,1.585)); +#212655 = VECTOR('',#212656,1.); +#212656 = DIRECTION('',(0.,-1.,0.)); +#212657 = ORIENTED_EDGE('',*,*,#212658,.T.); +#212658 = EDGE_CURVE('',#212651,#212659,#212661,.T.); +#212659 = VERTEX_POINT('',#212660); +#212660 = CARTESIAN_POINT('',(209.90665,-73.3231,1.585)); +#212661 = LINE('',#212662,#212663); +#212662 = CARTESIAN_POINT('',(208.52665,-73.3231,1.585)); +#212663 = VECTOR('',#212664,1.); +#212664 = DIRECTION('',(1.,0.,0.)); +#212665 = ORIENTED_EDGE('',*,*,#212666,.T.); +#212666 = EDGE_CURVE('',#212659,#212667,#212669,.T.); +#212667 = VERTEX_POINT('',#212668); +#212668 = CARTESIAN_POINT('',(209.90665,-72.6231,1.585)); +#212669 = LINE('',#212670,#212671); +#212670 = CARTESIAN_POINT('',(209.90665,-73.3231,1.585)); +#212671 = VECTOR('',#212672,1.); +#212672 = DIRECTION('',(0.,1.,0.)); +#212673 = ORIENTED_EDGE('',*,*,#212674,.T.); +#212674 = EDGE_CURVE('',#212667,#212675,#212677,.T.); +#212675 = VERTEX_POINT('',#212676); +#212676 = CARTESIAN_POINT('',(209.96665,-72.5631,1.585)); +#212677 = CIRCLE('',#212678,5.999932016253E-02); +#212678 = AXIS2_PLACEMENT_3D('',#212679,#212680,#212681); +#212679 = CARTESIAN_POINT('',(209.96664932015,-72.62309932015,1.585)); +#212680 = DIRECTION('',(0.,0.,-1.)); +#212681 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#212682 = ORIENTED_EDGE('',*,*,#212683,.T.); +#212683 = EDGE_CURVE('',#212675,#212684,#212686,.T.); +#212684 = VERTEX_POINT('',#212685); +#212685 = CARTESIAN_POINT('',(212.85665,-72.5631,1.585)); +#212686 = LINE('',#212687,#212688); +#212687 = CARTESIAN_POINT('',(209.96665,-72.5631,1.585)); +#212688 = VECTOR('',#212689,1.); +#212689 = DIRECTION('',(1.,0.,0.)); +#212690 = ORIENTED_EDGE('',*,*,#212691,.T.); +#212691 = EDGE_CURVE('',#212684,#212692,#212694,.T.); +#212692 = VERTEX_POINT('',#212693); +#212693 = CARTESIAN_POINT('',(212.85665,-66.5831,1.585)); +#212694 = LINE('',#212695,#212696); +#212695 = CARTESIAN_POINT('',(212.85665,-72.5631,1.585)); +#212696 = VECTOR('',#212697,1.); +#212697 = DIRECTION('',(0.,1.,0.)); +#212698 = ORIENTED_EDGE('',*,*,#212699,.T.); +#212699 = EDGE_CURVE('',#212692,#212524,#212700,.T.); +#212700 = LINE('',#212701,#212702); +#212701 = CARTESIAN_POINT('',(212.85665,-66.5831,1.585)); +#212702 = VECTOR('',#212703,1.); +#212703 = DIRECTION('',(-1.,0.,0.)); +#212704 = FACE_BOUND('',#212705,.F.); +#212705 = EDGE_LOOP('',(#212706,#212716,#212724,#212732,#212740,#212749, + #212757,#212766,#212774,#212782)); +#212706 = ORIENTED_EDGE('',*,*,#212707,.T.); +#212707 = EDGE_CURVE('',#212708,#212710,#212712,.T.); +#212708 = VERTEX_POINT('',#212709); +#212709 = CARTESIAN_POINT('',(213.61665,-73.3231,1.585)); +#212710 = VERTEX_POINT('',#212711); +#212711 = CARTESIAN_POINT('',(213.61665,-65.8231,1.585)); +#212712 = LINE('',#212713,#212714); +#212713 = CARTESIAN_POINT('',(213.61665,-73.3231,1.585)); +#212714 = VECTOR('',#212715,1.); +#212715 = DIRECTION('',(0.,1.,0.)); +#212716 = ORIENTED_EDGE('',*,*,#212717,.T.); +#212717 = EDGE_CURVE('',#212710,#212718,#212720,.T.); +#212718 = VERTEX_POINT('',#212719); +#212719 = CARTESIAN_POINT('',(210.02665,-65.8231,1.585)); +#212720 = LINE('',#212721,#212722); +#212721 = CARTESIAN_POINT('',(213.61665,-65.8231,1.585)); +#212722 = VECTOR('',#212723,1.); +#212723 = DIRECTION('',(-1.,0.,0.)); +#212724 = ORIENTED_EDGE('',*,*,#212725,.T.); +#212725 = EDGE_CURVE('',#212718,#212726,#212728,.T.); +#212726 = VERTEX_POINT('',#212727); +#212727 = CARTESIAN_POINT('',(210.02665,-66.4631,1.585)); +#212728 = LINE('',#212729,#212730); +#212729 = CARTESIAN_POINT('',(210.02665,-65.8231,1.585)); +#212730 = VECTOR('',#212731,1.); +#212731 = DIRECTION('',(0.,-1.,0.)); +#212732 = ORIENTED_EDGE('',*,*,#212733,.T.); +#212733 = EDGE_CURVE('',#212726,#212734,#212736,.T.); +#212734 = VERTEX_POINT('',#212735); +#212735 = CARTESIAN_POINT('',(212.91665,-66.4631,1.585)); +#212736 = LINE('',#212737,#212738); +#212737 = CARTESIAN_POINT('',(210.02665,-66.4631,1.585)); +#212738 = VECTOR('',#212739,1.); +#212739 = DIRECTION('',(1.,0.,0.)); +#212740 = ORIENTED_EDGE('',*,*,#212741,.T.); +#212741 = EDGE_CURVE('',#212734,#212742,#212744,.T.); +#212742 = VERTEX_POINT('',#212743); +#212743 = CARTESIAN_POINT('',(212.97665,-66.5231,1.585)); +#212744 = CIRCLE('',#212745,5.999932016262E-02); +#212745 = AXIS2_PLACEMENT_3D('',#212746,#212747,#212748); +#212746 = CARTESIAN_POINT('',(212.91665067984,-66.52309932015,1.585)); +#212747 = DIRECTION('',(0.,0.,-1.)); +#212748 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#212749 = ORIENTED_EDGE('',*,*,#212750,.T.); +#212750 = EDGE_CURVE('',#212742,#212751,#212753,.T.); +#212751 = VERTEX_POINT('',#212752); +#212752 = CARTESIAN_POINT('',(212.97665,-72.6231,1.585)); +#212753 = LINE('',#212754,#212755); +#212754 = CARTESIAN_POINT('',(212.97665,-66.5231,1.585)); +#212755 = VECTOR('',#212756,1.); +#212756 = DIRECTION('',(0.,-1.,0.)); +#212757 = ORIENTED_EDGE('',*,*,#212758,.T.); +#212758 = EDGE_CURVE('',#212751,#212759,#212761,.T.); +#212759 = VERTEX_POINT('',#212760); +#212760 = CARTESIAN_POINT('',(212.91665,-72.6831,1.585)); +#212761 = CIRCLE('',#212762,5.999932016262E-02); +#212762 = AXIS2_PLACEMENT_3D('',#212763,#212764,#212765); +#212763 = CARTESIAN_POINT('',(212.91665067984,-72.62310067984,1.585)); +#212764 = DIRECTION('',(0.,0.,-1.)); +#212765 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#212766 = ORIENTED_EDGE('',*,*,#212767,.T.); +#212767 = EDGE_CURVE('',#212759,#212768,#212770,.T.); +#212768 = VERTEX_POINT('',#212769); +#212769 = CARTESIAN_POINT('',(210.02665,-72.6831,1.585)); +#212770 = LINE('',#212771,#212772); +#212771 = CARTESIAN_POINT('',(212.91665,-72.6831,1.585)); +#212772 = VECTOR('',#212773,1.); +#212773 = DIRECTION('',(-1.,0.,0.)); +#212774 = ORIENTED_EDGE('',*,*,#212775,.T.); +#212775 = EDGE_CURVE('',#212768,#212776,#212778,.T.); +#212776 = VERTEX_POINT('',#212777); +#212777 = CARTESIAN_POINT('',(210.02665,-73.3231,1.585)); +#212778 = LINE('',#212779,#212780); +#212779 = CARTESIAN_POINT('',(210.02665,-72.6831,1.585)); +#212780 = VECTOR('',#212781,1.); +#212781 = DIRECTION('',(0.,-1.,0.)); +#212782 = ORIENTED_EDGE('',*,*,#212783,.T.); +#212783 = EDGE_CURVE('',#212776,#212708,#212784,.T.); +#212784 = LINE('',#212785,#212786); +#212785 = CARTESIAN_POINT('',(210.02665,-73.3231,1.585)); +#212786 = VECTOR('',#212787,1.); +#212787 = DIRECTION('',(1.,0.,0.)); +#212788 = FACE_BOUND('',#212789,.F.); +#212789 = EDGE_LOOP('',(#212790,#212800,#212808,#212816)); +#212790 = ORIENTED_EDGE('',*,*,#212791,.T.); +#212791 = EDGE_CURVE('',#212792,#212794,#212796,.T.); +#212792 = VERTEX_POINT('',#212793); +#212793 = CARTESIAN_POINT('',(208.40665,-73.3131,1.585)); +#212794 = VERTEX_POINT('',#212795); +#212795 = CARTESIAN_POINT('',(208.40665,-71.6331,1.585)); +#212796 = LINE('',#212797,#212798); +#212797 = CARTESIAN_POINT('',(208.40665,-73.3131,1.585)); +#212798 = VECTOR('',#212799,1.); +#212799 = DIRECTION('',(0.,1.,0.)); +#212800 = ORIENTED_EDGE('',*,*,#212801,.T.); +#212801 = EDGE_CURVE('',#212794,#212802,#212804,.T.); +#212802 = VERTEX_POINT('',#212803); +#212803 = CARTESIAN_POINT('',(207.77665,-71.6331,1.585)); +#212804 = LINE('',#212805,#212806); +#212805 = CARTESIAN_POINT('',(208.40665,-71.6331,1.585)); +#212806 = VECTOR('',#212807,1.); +#212807 = DIRECTION('',(-1.,0.,0.)); +#212808 = ORIENTED_EDGE('',*,*,#212809,.T.); +#212809 = EDGE_CURVE('',#212802,#212810,#212812,.T.); +#212810 = VERTEX_POINT('',#212811); +#212811 = CARTESIAN_POINT('',(207.77665,-73.3131,1.585)); +#212812 = LINE('',#212813,#212814); +#212813 = CARTESIAN_POINT('',(207.77665,-71.6331,1.585)); +#212814 = VECTOR('',#212815,1.); +#212815 = DIRECTION('',(0.,-1.,0.)); +#212816 = ORIENTED_EDGE('',*,*,#212817,.T.); +#212817 = EDGE_CURVE('',#212810,#212792,#212818,.T.); +#212818 = LINE('',#212819,#212820); +#212819 = CARTESIAN_POINT('',(207.77665,-73.3131,1.585)); +#212820 = VECTOR('',#212821,1.); +#212821 = DIRECTION('',(1.,0.,0.)); +#212822 = FACE_BOUND('',#212823,.F.); +#212823 = EDGE_LOOP('',(#212824,#212834,#212842,#212850)); +#212824 = ORIENTED_EDGE('',*,*,#212825,.T.); +#212825 = EDGE_CURVE('',#212826,#212828,#212830,.T.); +#212826 = VERTEX_POINT('',#212827); +#212827 = CARTESIAN_POINT('',(208.40665,-70.0131,1.585)); +#212828 = VERTEX_POINT('',#212829); +#212829 = CARTESIAN_POINT('',(208.40665,-69.1331,1.585)); +#212830 = LINE('',#212831,#212832); +#212831 = CARTESIAN_POINT('',(208.40665,-70.0131,1.585)); +#212832 = VECTOR('',#212833,1.); +#212833 = DIRECTION('',(0.,1.,0.)); +#212834 = ORIENTED_EDGE('',*,*,#212835,.T.); +#212835 = EDGE_CURVE('',#212828,#212836,#212838,.T.); +#212836 = VERTEX_POINT('',#212837); +#212837 = CARTESIAN_POINT('',(207.77665,-69.1331,1.585)); +#212838 = LINE('',#212839,#212840); +#212839 = CARTESIAN_POINT('',(208.40665,-69.1331,1.585)); +#212840 = VECTOR('',#212841,1.); +#212841 = DIRECTION('',(-1.,0.,0.)); +#212842 = ORIENTED_EDGE('',*,*,#212843,.T.); +#212843 = EDGE_CURVE('',#212836,#212844,#212846,.T.); +#212844 = VERTEX_POINT('',#212845); +#212845 = CARTESIAN_POINT('',(207.77665,-70.0131,1.585)); +#212846 = LINE('',#212847,#212848); +#212847 = CARTESIAN_POINT('',(207.77665,-69.1331,1.585)); +#212848 = VECTOR('',#212849,1.); +#212849 = DIRECTION('',(0.,-1.,0.)); +#212850 = ORIENTED_EDGE('',*,*,#212851,.T.); +#212851 = EDGE_CURVE('',#212844,#212826,#212852,.T.); +#212852 = LINE('',#212853,#212854); +#212853 = CARTESIAN_POINT('',(207.77665,-70.0131,1.585)); +#212854 = VECTOR('',#212855,1.); +#212855 = DIRECTION('',(1.,0.,0.)); +#212856 = FACE_BOUND('',#212857,.F.); +#212857 = EDGE_LOOP('',(#212858,#212868,#212876,#212884)); +#212858 = ORIENTED_EDGE('',*,*,#212859,.T.); +#212859 = EDGE_CURVE('',#212860,#212862,#212864,.T.); +#212860 = VERTEX_POINT('',#212861); +#212861 = CARTESIAN_POINT('',(208.40665,-67.5131,1.585)); +#212862 = VERTEX_POINT('',#212863); +#212863 = CARTESIAN_POINT('',(208.40665,-65.8331,1.585)); +#212864 = LINE('',#212865,#212866); +#212865 = CARTESIAN_POINT('',(208.40665,-67.5131,1.585)); +#212866 = VECTOR('',#212867,1.); +#212867 = DIRECTION('',(0.,1.,0.)); +#212868 = ORIENTED_EDGE('',*,*,#212869,.T.); +#212869 = EDGE_CURVE('',#212862,#212870,#212872,.T.); +#212870 = VERTEX_POINT('',#212871); +#212871 = CARTESIAN_POINT('',(207.77665,-65.8331,1.585)); +#212872 = LINE('',#212873,#212874); +#212873 = CARTESIAN_POINT('',(208.40665,-65.8331,1.585)); +#212874 = VECTOR('',#212875,1.); +#212875 = DIRECTION('',(-1.,0.,0.)); +#212876 = ORIENTED_EDGE('',*,*,#212877,.T.); +#212877 = EDGE_CURVE('',#212870,#212878,#212880,.T.); +#212878 = VERTEX_POINT('',#212879); +#212879 = CARTESIAN_POINT('',(207.77665,-67.5131,1.585)); +#212880 = LINE('',#212881,#212882); +#212881 = CARTESIAN_POINT('',(207.77665,-65.8331,1.585)); +#212882 = VECTOR('',#212883,1.); +#212883 = DIRECTION('',(0.,-1.,0.)); +#212884 = ORIENTED_EDGE('',*,*,#212885,.T.); +#212885 = EDGE_CURVE('',#212878,#212860,#212886,.T.); +#212886 = LINE('',#212887,#212888); +#212887 = CARTESIAN_POINT('',(207.77665,-67.5131,1.585)); +#212888 = VECTOR('',#212889,1.); +#212889 = DIRECTION('',(1.,0.,0.)); +#212890 = PLANE('',#212891); +#212891 = AXIS2_PLACEMENT_3D('',#212892,#212893,#212894); +#212892 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212893 = DIRECTION('',(0.,0.,1.)); +#212894 = DIRECTION('',(1.,0.,-0.)); +#212895 = SHELL_BASED_SURFACE_MODEL('',(#212896)); +#212896 = OPEN_SHELL('',(#212897)); +#212897 = ADVANCED_FACE('',(#212898),#212984,.T.); +#212898 = FACE_BOUND('',#212899,.F.); +#212899 = EDGE_LOOP('',(#212900,#212911,#212919,#212928,#212936,#212945, + #212953,#212962,#212970,#212978)); +#212900 = ORIENTED_EDGE('',*,*,#212901,.T.); +#212901 = EDGE_CURVE('',#212902,#212904,#212906,.T.); +#212902 = VERTEX_POINT('',#212903); +#212903 = CARTESIAN_POINT('',(173.816648,-71.715559,1.585)); +#212904 = VERTEX_POINT('',#212905); +#212905 = CARTESIAN_POINT('',(173.933316,-71.777919,1.585)); +#212906 = CIRCLE('',#212907,7.500000000002E-02); +#212907 = AXIS2_PLACEMENT_3D('',#212908,#212909,#212910); +#212908 = CARTESIAN_POINT('',(173.858316,-71.77791906555,1.585)); +#212909 = DIRECTION('',(0.,0.,-1.)); +#212910 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#212911 = ORIENTED_EDGE('',*,*,#212912,.T.); +#212912 = EDGE_CURVE('',#212904,#212913,#212915,.T.); +#212913 = VERTEX_POINT('',#212914); +#212914 = CARTESIAN_POINT('',(173.931116,-72.508666,1.585)); +#212915 = LINE('',#212916,#212917); +#212916 = CARTESIAN_POINT('',(173.933316,-71.777919,1.585)); +#212917 = VECTOR('',#212918,1.); +#212918 = DIRECTION('',(-3.010604258181E-03,-0.999995468121,0.)); +#212919 = ORIENTED_EDGE('',*,*,#212920,.T.); +#212920 = EDGE_CURVE('',#212913,#212921,#212923,.T.); +#212921 = VERTEX_POINT('',#212922); +#212922 = CARTESIAN_POINT('',(173.580007,-72.852189,1.585)); +#212923 = CIRCLE('',#212924,0.38184101318); +#212924 = AXIS2_PLACEMENT_3D('',#212925,#212926,#212927); +#212925 = CARTESIAN_POINT('',(173.55109350032,-72.47144424444,1.585)); +#212926 = DIRECTION('',(0.,0.,-1.)); +#212927 = DIRECTION('',(0.995237511316,-9.747972132603E-02,0.)); +#212928 = ORIENTED_EDGE('',*,*,#212929,.T.); +#212929 = EDGE_CURVE('',#212921,#212930,#212932,.T.); +#212930 = VERTEX_POINT('',#212931); +#212931 = CARTESIAN_POINT('',(173.462732,-72.851478,1.585)); +#212932 = LINE('',#212933,#212934); +#212933 = CARTESIAN_POINT('',(173.580007,-72.852189,1.585)); +#212934 = VECTOR('',#212935,1.); +#212935 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#212936 = ORIENTED_EDGE('',*,*,#212937,.T.); +#212937 = EDGE_CURVE('',#212930,#212938,#212940,.T.); +#212938 = VERTEX_POINT('',#212939); +#212939 = CARTESIAN_POINT('',(173.477364,-72.702919,1.585)); +#212940 = CIRCLE('',#212941,7.500006711464E-02); +#212941 = AXIS2_PLACEMENT_3D('',#212942,#212943,#212944); +#212942 = CARTESIAN_POINT('',(173.47736393288,-72.77791906711,1.585)); +#212943 = DIRECTION('',(0.,0.,-1.)); +#212944 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#212945 = ORIENTED_EDGE('',*,*,#212946,.T.); +#212946 = EDGE_CURVE('',#212938,#212947,#212949,.T.); +#212947 = VERTEX_POINT('',#212948); +#212948 = CARTESIAN_POINT('',(173.560432,-72.702919,1.585)); +#212949 = LINE('',#212950,#212951); +#212950 = CARTESIAN_POINT('',(173.477364,-72.702919,1.585)); +#212951 = VECTOR('',#212952,1.); +#212952 = DIRECTION('',(1.,0.,0.)); +#212953 = ORIENTED_EDGE('',*,*,#212954,.T.); +#212954 = EDGE_CURVE('',#212947,#212955,#212957,.T.); +#212955 = VERTEX_POINT('',#212956); +#212956 = CARTESIAN_POINT('',(173.783316,-72.480034,1.585)); +#212957 = CIRCLE('',#212958,0.239437351684); +#212958 = AXIS2_PLACEMENT_3D('',#212959,#212960,#212961); +#212959 = CARTESIAN_POINT('',(173.54441490658,-72.46401797844,1.585)); +#212960 = DIRECTION('',(0.,0.,1.)); +#212961 = DIRECTION('',(6.689471506002E-02,-0.997760039838,0.)); +#212962 = ORIENTED_EDGE('',*,*,#212963,.T.); +#212963 = EDGE_CURVE('',#212955,#212964,#212966,.T.); +#212964 = VERTEX_POINT('',#212965); +#212965 = CARTESIAN_POINT('',(173.784757,-71.763287,1.585)); +#212966 = LINE('',#212967,#212968); +#212967 = CARTESIAN_POINT('',(173.783316,-72.480034,1.585)); +#212968 = VECTOR('',#212969,1.); +#212969 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#212970 = ORIENTED_EDGE('',*,*,#212971,.T.); +#212971 = EDGE_CURVE('',#212964,#212972,#212974,.T.); +#212972 = VERTEX_POINT('',#212973); +#212973 = CARTESIAN_POINT('',(173.795956,-71.736251,1.585)); +#212974 = LINE('',#212975,#212976); +#212975 = CARTESIAN_POINT('',(173.784757,-71.763287,1.585)); +#212976 = VECTOR('',#212977,1.); +#212977 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#212978 = ORIENTED_EDGE('',*,*,#212979,.T.); +#212979 = EDGE_CURVE('',#212972,#212902,#212980,.T.); +#212980 = LINE('',#212981,#212982); +#212981 = CARTESIAN_POINT('',(173.795956,-71.736251,1.585)); +#212982 = VECTOR('',#212983,1.); +#212983 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#212984 = PLANE('',#212985); +#212985 = AXIS2_PLACEMENT_3D('',#212986,#212987,#212988); +#212986 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212987 = DIRECTION('',(0.,0.,1.)); +#212988 = DIRECTION('',(1.,0.,-0.)); +#212989 = SHELL_BASED_SURFACE_MODEL('',(#212990)); +#212990 = OPEN_SHELL('',(#212991)); +#212991 = ADVANCED_FACE('',(#212992),#213078,.T.); +#212992 = FACE_BOUND('',#212993,.F.); +#212993 = EDGE_LOOP('',(#212994,#213005,#213013,#213022,#213030,#213039, + #213047,#213056,#213064,#213072)); +#212994 = ORIENTED_EDGE('',*,*,#212995,.T.); +#212995 = EDGE_CURVE('',#212996,#212998,#213000,.T.); +#212996 = VERTEX_POINT('',#212997); +#212997 = CARTESIAN_POINT('',(196.166648,-71.715559,1.585)); +#212998 = VERTEX_POINT('',#212999); +#212999 = CARTESIAN_POINT('',(196.283316,-71.777919,1.585)); +#213000 = CIRCLE('',#213001,7.500000000002E-02); +#213001 = AXIS2_PLACEMENT_3D('',#213002,#213003,#213004); +#213002 = CARTESIAN_POINT('',(196.208316,-71.77791906555,1.585)); +#213003 = DIRECTION('',(0.,0.,-1.)); +#213004 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#213005 = ORIENTED_EDGE('',*,*,#213006,.T.); +#213006 = EDGE_CURVE('',#212998,#213007,#213009,.T.); +#213007 = VERTEX_POINT('',#213008); +#213008 = CARTESIAN_POINT('',(196.281116,-72.508666,1.585)); +#213009 = LINE('',#213010,#213011); +#213010 = CARTESIAN_POINT('',(196.283316,-71.777919,1.585)); +#213011 = VECTOR('',#213012,1.); +#213012 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#213013 = ORIENTED_EDGE('',*,*,#213014,.T.); +#213014 = EDGE_CURVE('',#213007,#213015,#213017,.T.); +#213015 = VERTEX_POINT('',#213016); +#213016 = CARTESIAN_POINT('',(195.930007,-72.852189,1.585)); +#213017 = CIRCLE('',#213018,0.38184101318); +#213018 = AXIS2_PLACEMENT_3D('',#213019,#213020,#213021); +#213019 = CARTESIAN_POINT('',(195.90109350032,-72.47144424444,1.585)); +#213020 = DIRECTION('',(0.,0.,-1.)); +#213021 = DIRECTION('',(0.995237511316,-9.747972132586E-02,0.)); +#213022 = ORIENTED_EDGE('',*,*,#213023,.T.); +#213023 = EDGE_CURVE('',#213015,#213024,#213026,.T.); +#213024 = VERTEX_POINT('',#213025); +#213025 = CARTESIAN_POINT('',(195.812732,-72.851478,1.585)); +#213026 = LINE('',#213027,#213028); +#213027 = CARTESIAN_POINT('',(195.930007,-72.852189,1.585)); +#213028 = VECTOR('',#213029,1.); +#213029 = DIRECTION('',(-0.999981622503,6.062561787214E-03,0.)); +#213030 = ORIENTED_EDGE('',*,*,#213031,.T.); +#213031 = EDGE_CURVE('',#213024,#213032,#213034,.T.); +#213032 = VERTEX_POINT('',#213033); +#213033 = CARTESIAN_POINT('',(195.827364,-72.702919,1.585)); +#213034 = CIRCLE('',#213035,7.500006711464E-02); +#213035 = AXIS2_PLACEMENT_3D('',#213036,#213037,#213038); +#213036 = CARTESIAN_POINT('',(195.82736393288,-72.77791906711,1.585)); +#213037 = DIRECTION('',(0.,0.,-1.)); +#213038 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#213039 = ORIENTED_EDGE('',*,*,#213040,.T.); +#213040 = EDGE_CURVE('',#213032,#213041,#213043,.T.); +#213041 = VERTEX_POINT('',#213042); +#213042 = CARTESIAN_POINT('',(195.910432,-72.702919,1.585)); +#213043 = LINE('',#213044,#213045); +#213044 = CARTESIAN_POINT('',(195.827364,-72.702919,1.585)); +#213045 = VECTOR('',#213046,1.); +#213046 = DIRECTION('',(1.,0.,0.)); +#213047 = ORIENTED_EDGE('',*,*,#213048,.T.); +#213048 = EDGE_CURVE('',#213041,#213049,#213051,.T.); +#213049 = VERTEX_POINT('',#213050); +#213050 = CARTESIAN_POINT('',(196.133316,-72.480034,1.585)); +#213051 = CIRCLE('',#213052,0.239437351684); +#213052 = AXIS2_PLACEMENT_3D('',#213053,#213054,#213055); +#213053 = CARTESIAN_POINT('',(195.89441490658,-72.46401797844,1.585)); +#213054 = DIRECTION('',(0.,0.,1.)); +#213055 = DIRECTION('',(6.68947150599E-02,-0.997760039838,0.)); +#213056 = ORIENTED_EDGE('',*,*,#213057,.T.); +#213057 = EDGE_CURVE('',#213049,#213058,#213060,.T.); +#213058 = VERTEX_POINT('',#213059); +#213059 = CARTESIAN_POINT('',(196.134757,-71.763287,1.585)); +#213060 = LINE('',#213061,#213062); +#213061 = CARTESIAN_POINT('',(196.133316,-72.480034,1.585)); +#213062 = VECTOR('',#213063,1.); +#213063 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#213064 = ORIENTED_EDGE('',*,*,#213065,.T.); +#213065 = EDGE_CURVE('',#213058,#213066,#213068,.T.); +#213066 = VERTEX_POINT('',#213067); +#213067 = CARTESIAN_POINT('',(196.145956,-71.736251,1.585)); +#213068 = LINE('',#213069,#213070); +#213069 = CARTESIAN_POINT('',(196.134757,-71.763287,1.585)); +#213070 = VECTOR('',#213071,1.); +#213071 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#213072 = ORIENTED_EDGE('',*,*,#213073,.T.); +#213073 = EDGE_CURVE('',#213066,#212996,#213074,.T.); +#213074 = LINE('',#213075,#213076); +#213075 = CARTESIAN_POINT('',(196.145956,-71.736251,1.585)); +#213076 = VECTOR('',#213077,1.); +#213077 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#213078 = PLANE('',#213079); +#213079 = AXIS2_PLACEMENT_3D('',#213080,#213081,#213082); +#213080 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213081 = DIRECTION('',(0.,0.,1.)); +#213082 = DIRECTION('',(1.,0.,-0.)); +#213083 = SHELL_BASED_SURFACE_MODEL('',(#213084)); +#213084 = OPEN_SHELL('',(#213085)); +#213085 = ADVANCED_FACE('',(#213086),#213147,.T.); +#213086 = FACE_BOUND('',#213087,.F.); +#213087 = EDGE_LOOP('',(#213088,#213099,#213107,#213116,#213124,#213133, + #213141)); +#213088 = ORIENTED_EDGE('',*,*,#213089,.T.); +#213089 = EDGE_CURVE('',#213090,#213092,#213094,.T.); +#213090 = VERTEX_POINT('',#213091); +#213091 = CARTESIAN_POINT('',(174.224637,-71.851478,1.585)); +#213092 = VERTEX_POINT('',#213093); +#213093 = CARTESIAN_POINT('',(174.239269,-71.702919,1.585)); +#213094 = CIRCLE('',#213095,7.500006711464E-02); +#213095 = AXIS2_PLACEMENT_3D('',#213096,#213097,#213098); +#213096 = CARTESIAN_POINT('',(174.23926893288,-71.77791906711,1.585)); +#213097 = DIRECTION('',(0.,0.,-1.)); +#213098 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#213099 = ORIENTED_EDGE('',*,*,#213100,.T.); +#213100 = EDGE_CURVE('',#213092,#213101,#213103,.T.); +#213101 = VERTEX_POINT('',#213102); +#213102 = CARTESIAN_POINT('',(174.920567,-71.70436,1.585)); +#213103 = LINE('',#213104,#213105); +#213104 = CARTESIAN_POINT('',(174.239269,-71.702919,1.585)); +#213105 = VECTOR('',#213106,1.); +#213106 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#213107 = ORIENTED_EDGE('',*,*,#213108,.T.); +#213108 = EDGE_CURVE('',#213101,#213109,#213111,.T.); +#213109 = VERTEX_POINT('',#213110); +#213110 = CARTESIAN_POINT('',(174.974871,-71.807463,1.585)); +#213111 = CIRCLE('',#213112,7.500015546837E-02); +#213112 = AXIS2_PLACEMENT_3D('',#213113,#213114,#213115); +#213113 = CARTESIAN_POINT('',(174.90593497422,-71.77791900449,1.585)); +#213114 = DIRECTION('',(0.,0.,-1.)); +#213115 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#213116 = ORIENTED_EDGE('',*,*,#213117,.T.); +#213117 = EDGE_CURVE('',#213109,#213118,#213120,.T.); +#213118 = VERTEX_POINT('',#213119); +#213119 = CARTESIAN_POINT('',(174.539212,-72.820344,1.585)); +#213120 = LINE('',#213121,#213122); +#213121 = CARTESIAN_POINT('',(174.974871,-71.807463,1.585)); +#213122 = VECTOR('',#213123,1.); +#213123 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#213124 = ORIENTED_EDGE('',*,*,#213125,.T.); +#213125 = EDGE_CURVE('',#213118,#213126,#213128,.T.); +#213126 = VERTEX_POINT('',#213127); +#213127 = CARTESIAN_POINT('',(174.408428,-72.748375,1.585)); +#213128 = CIRCLE('',#213129,7.500030178421E-02); +#213129 = AXIS2_PLACEMENT_3D('',#213130,#213131,#213132); +#213130 = CARTESIAN_POINT('',(174.47736434698,-72.77791861745,1.585)); +#213131 = DIRECTION('',(-0.,0.,-1.)); +#213132 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#213133 = ORIENTED_EDGE('',*,*,#213134,.T.); +#213134 = EDGE_CURVE('',#213126,#213135,#213137,.T.); +#213135 = VERTEX_POINT('',#213136); +#213136 = CARTESIAN_POINT('',(174.792194,-71.852919,1.585)); +#213137 = LINE('',#213138,#213139); +#213138 = CARTESIAN_POINT('',(174.408428,-72.748375,1.585)); +#213139 = VECTOR('',#213140,1.); +#213140 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#213141 = ORIENTED_EDGE('',*,*,#213142,.T.); +#213142 = EDGE_CURVE('',#213135,#213090,#213143,.T.); +#213143 = LINE('',#213144,#213145); +#213144 = CARTESIAN_POINT('',(174.792194,-71.852919,1.585)); +#213145 = VECTOR('',#213146,1.); +#213146 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#213147 = PLANE('',#213148); +#213148 = AXIS2_PLACEMENT_3D('',#213149,#213150,#213151); +#213149 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213150 = DIRECTION('',(0.,0.,1.)); +#213151 = DIRECTION('',(1.,0.,-0.)); +#213152 = SHELL_BASED_SURFACE_MODEL('',(#213153)); +#213153 = OPEN_SHELL('',(#213154)); +#213154 = ADVANCED_FACE('',(#213155,#213305,#213375),#213460,.T.); +#213155 = FACE_BOUND('',#213156,.F.); +#213156 = EDGE_LOOP('',(#213157,#213168,#213176,#213184,#213192,#213200, + #213208,#213216,#213225,#213233,#213242,#213250,#213259,#213267, + #213275,#213283,#213291,#213299)); +#213157 = ORIENTED_EDGE('',*,*,#213158,.T.); +#213158 = EDGE_CURVE('',#213159,#213161,#213163,.T.); +#213159 = VERTEX_POINT('',#213160); +#213160 = CARTESIAN_POINT('',(196.692285,-71.76242,1.585)); +#213161 = VERTEX_POINT('',#213162); +#213162 = CARTESIAN_POINT('',(197.160361,-71.767786,1.585)); +#213163 = CIRCLE('',#213164,0.397581403297); +#213164 = AXIS2_PLACEMENT_3D('',#213165,#213166,#213167); +#213165 = CARTESIAN_POINT('',(196.92263887062,-72.08646948161,1.585)); +#213166 = DIRECTION('',(0.,0.,-1.)); +#213167 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#213168 = ORIENTED_EDGE('',*,*,#213169,.T.); +#213169 = EDGE_CURVE('',#213161,#213170,#213172,.T.); +#213170 = VERTEX_POINT('',#213171); +#213171 = CARTESIAN_POINT('',(197.223814,-71.833316,1.585)); +#213172 = LINE('',#213173,#213174); +#213173 = CARTESIAN_POINT('',(197.160361,-71.767786,1.585)); +#213174 = VECTOR('',#213175,1.); +#213175 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#213176 = ORIENTED_EDGE('',*,*,#213177,.T.); +#213177 = EDGE_CURVE('',#213170,#213178,#213180,.T.); +#213178 = VERTEX_POINT('',#213179); +#213179 = CARTESIAN_POINT('',(197.281875,-71.953763,1.585)); +#213180 = LINE('',#213181,#213182); +#213181 = CARTESIAN_POINT('',(197.223814,-71.833316,1.585)); +#213182 = VECTOR('',#213183,1.); +#213183 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#213184 = ORIENTED_EDGE('',*,*,#213185,.T.); +#213185 = EDGE_CURVE('',#213178,#213186,#213188,.T.); +#213186 = VERTEX_POINT('',#213187); +#213187 = CARTESIAN_POINT('',(197.280653,-72.035824,1.585)); +#213188 = LINE('',#213189,#213190); +#213189 = CARTESIAN_POINT('',(197.281875,-71.953763,1.585)); +#213190 = VECTOR('',#213191,1.); +#213191 = DIRECTION('',(-1.488971047975E-02,-0.999889142116,0.)); +#213192 = ORIENTED_EDGE('',*,*,#213193,.T.); +#213193 = EDGE_CURVE('',#213186,#213194,#213196,.T.); +#213194 = VERTEX_POINT('',#213195); +#213195 = CARTESIAN_POINT('',(197.218448,-72.158535,1.585)); +#213196 = LINE('',#213197,#213198); +#213197 = CARTESIAN_POINT('',(197.280653,-72.035824,1.585)); +#213198 = VECTOR('',#213199,1.); +#213199 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#213200 = ORIENTED_EDGE('',*,*,#213201,.T.); +#213201 = EDGE_CURVE('',#213194,#213202,#213204,.T.); +#213202 = VERTEX_POINT('',#213203); +#213203 = CARTESIAN_POINT('',(197.171525,-72.20649,1.585)); +#213204 = LINE('',#213205,#213206); +#213205 = CARTESIAN_POINT('',(197.218448,-72.158535,1.585)); +#213206 = VECTOR('',#213207,1.); +#213207 = DIRECTION('',(-0.699374120429,-0.714755790235,0.)); +#213208 = ORIENTED_EDGE('',*,*,#213209,.T.); +#213209 = EDGE_CURVE('',#213202,#213210,#213212,.T.); +#213210 = VERTEX_POINT('',#213211); +#213211 = CARTESIAN_POINT('',(197.227779,-72.268187,1.585)); +#213212 = LINE('',#213213,#213214); +#213213 = CARTESIAN_POINT('',(197.171525,-72.20649,1.585)); +#213214 = VECTOR('',#213215,1.); +#213215 = DIRECTION('',(0.673759436039,-0.738950757729,0.)); +#213216 = ORIENTED_EDGE('',*,*,#213217,.T.); +#213217 = EDGE_CURVE('',#213210,#213218,#213220,.T.); +#213218 = VERTEX_POINT('',#213219); +#213219 = CARTESIAN_POINT('',(197.218448,-72.729963,1.585)); +#213220 = CIRCLE('',#213221,0.395774657874); +#213221 = AXIS2_PLACEMENT_3D('',#213222,#213223,#213224); +#213222 = CARTESIAN_POINT('',(196.90176574421,-72.49258160079,1.585)); +#213223 = DIRECTION('',(0.,0.,-1.)); +#213224 = DIRECTION('',(0.823734540094,0.566975667428,0.)); +#213225 = ORIENTED_EDGE('',*,*,#213226,.T.); +#213226 = EDGE_CURVE('',#213218,#213227,#213229,.T.); +#213227 = VERTEX_POINT('',#213228); +#213228 = CARTESIAN_POINT('',(197.152918,-72.793417,1.585)); +#213229 = LINE('',#213230,#213231); +#213230 = CARTESIAN_POINT('',(197.218448,-72.729963,1.585)); +#213231 = VECTOR('',#213232,1.); +#213232 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#213233 = ORIENTED_EDGE('',*,*,#213234,.T.); +#213234 = EDGE_CURVE('',#213227,#213235,#213237,.T.); +#213235 = VERTEX_POINT('',#213236); +#213236 = CARTESIAN_POINT('',(196.684841,-72.78805,1.585)); +#213237 = CIRCLE('',#213238,0.397464151365); +#213238 = AXIS2_PLACEMENT_3D('',#213239,#213240,#213241); +#213239 = CARTESIAN_POINT('',(196.92256264058,-72.46951244614,1.585)); +#213240 = DIRECTION('',(-0.,0.,-1.)); +#213241 = DIRECTION('',(0.579562606145,-0.814927717996,-0.)); +#213242 = ORIENTED_EDGE('',*,*,#213243,.T.); +#213243 = EDGE_CURVE('',#213235,#213244,#213246,.T.); +#213244 = VERTEX_POINT('',#213245); +#213245 = CARTESIAN_POINT('',(196.621388,-72.722517,1.585)); +#213246 = LINE('',#213247,#213248); +#213247 = CARTESIAN_POINT('',(196.684841,-72.78805,1.585)); +#213248 = VECTOR('',#213249,1.); +#213249 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#213250 = ORIENTED_EDGE('',*,*,#213251,.T.); +#213251 = EDGE_CURVE('',#213244,#213252,#213254,.T.); +#213252 = VERTEX_POINT('',#213253); +#213253 = CARTESIAN_POINT('',(196.626755,-72.254444,1.585)); +#213254 = CIRCLE('',#213255,0.397465551155); +#213255 = AXIS2_PLACEMENT_3D('',#213256,#213257,#213258); +#213256 = CARTESIAN_POINT('',(196.94529574227,-72.49216370862,1.585)); +#213257 = DIRECTION('',(0.,0.,-1.)); +#213258 = DIRECTION('',(-0.814932869863,-0.579555361995,-0.)); +#213259 = ORIENTED_EDGE('',*,*,#213260,.T.); +#213260 = EDGE_CURVE('',#213252,#213261,#213263,.T.); +#213261 = VERTEX_POINT('',#213262); +#213262 = CARTESIAN_POINT('',(196.673679,-72.20649,1.585)); +#213263 = LINE('',#213264,#213265); +#213264 = CARTESIAN_POINT('',(196.626755,-72.254444,1.585)); +#213265 = VECTOR('',#213266,1.); +#213266 = DIRECTION('',(0.699389185334,0.714741049218,0.)); +#213267 = ORIENTED_EDGE('',*,*,#213268,.T.); +#213268 = EDGE_CURVE('',#213261,#213269,#213271,.T.); +#213269 = VERTEX_POINT('',#213270); +#213270 = CARTESIAN_POINT('',(196.617425,-72.144793,1.585)); +#213271 = LINE('',#213272,#213273); +#213272 = CARTESIAN_POINT('',(196.673679,-72.20649,1.585)); +#213273 = VECTOR('',#213274,1.); +#213274 = DIRECTION('',(-0.673759436039,0.738950757729,0.)); +#213275 = ORIENTED_EDGE('',*,*,#213276,.T.); +#213276 = EDGE_CURVE('',#213269,#213277,#213279,.T.); +#213277 = VERTEX_POINT('',#213278); +#213278 = CARTESIAN_POINT('',(196.563329,-72.030646,1.585)); +#213279 = LINE('',#213280,#213281); +#213280 = CARTESIAN_POINT('',(196.617425,-72.144793,1.585)); +#213281 = VECTOR('',#213282,1.); +#213282 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#213283 = ORIENTED_EDGE('',*,*,#213284,.T.); +#213284 = EDGE_CURVE('',#213277,#213285,#213287,.T.); +#213285 = VERTEX_POINT('',#213286); +#213286 = CARTESIAN_POINT('',(196.564551,-71.948586,1.585)); +#213287 = LINE('',#213288,#213289); +#213288 = CARTESIAN_POINT('',(196.563329,-72.030646,1.585)); +#213289 = VECTOR('',#213290,1.); +#213290 = DIRECTION('',(1.488989188824E-02,0.999889139415,0.)); +#213291 = ORIENTED_EDGE('',*,*,#213292,.T.); +#213292 = EDGE_CURVE('',#213285,#213293,#213295,.T.); +#213293 = VERTEX_POINT('',#213294); +#213294 = CARTESIAN_POINT('',(196.626755,-71.825873,1.585)); +#213295 = LINE('',#213296,#213297); +#213296 = CARTESIAN_POINT('',(196.564551,-71.948586,1.585)); +#213297 = VECTOR('',#213298,1.); +#213298 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#213299 = ORIENTED_EDGE('',*,*,#213300,.T.); +#213300 = EDGE_CURVE('',#213293,#213159,#213301,.T.); +#213301 = LINE('',#213302,#213303); +#213302 = CARTESIAN_POINT('',(196.626755,-71.825873,1.585)); +#213303 = VECTOR('',#213304,1.); +#213304 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#213305 = FACE_BOUND('',#213306,.F.); +#213306 = EDGE_LOOP('',(#213307,#213318,#213326,#213335,#213343,#213352, + #213360,#213369)); +#213307 = ORIENTED_EDGE('',*,*,#213308,.T.); +#213308 = EDGE_CURVE('',#213309,#213311,#213313,.T.); +#213309 = VERTEX_POINT('',#213310); +#213310 = CARTESIAN_POINT('',(197.068651,-72.315748,1.585)); +#213311 = VERTEX_POINT('',#213312); +#213312 = CARTESIAN_POINT('',(196.776553,-72.315748,1.585)); +#213313 = CIRCLE('',#213314,0.252889603602); +#213314 = AXIS2_PLACEMENT_3D('',#213315,#213316,#213317); +#213315 = CARTESIAN_POINT('',(196.922602,-72.522201,1.585)); +#213316 = DIRECTION('',(0.,0.,1.)); +#213317 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#213318 = ORIENTED_EDGE('',*,*,#213319,.T.); +#213319 = EDGE_CURVE('',#213311,#213320,#213322,.T.); +#213320 = VERTEX_POINT('',#213321); +#213321 = CARTESIAN_POINT('',(196.746146,-72.346155,1.585)); +#213322 = LINE('',#213323,#213324); +#213323 = CARTESIAN_POINT('',(196.776553,-72.315748,1.585)); +#213324 = VECTOR('',#213325,1.); +#213325 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#213326 = ORIENTED_EDGE('',*,*,#213327,.T.); +#213327 = EDGE_CURVE('',#213320,#213328,#213330,.T.); +#213328 = VERTEX_POINT('',#213329); +#213329 = CARTESIAN_POINT('',(196.746146,-72.638253,1.585)); +#213330 = CIRCLE('',#213331,0.252889603602); +#213331 = AXIS2_PLACEMENT_3D('',#213332,#213333,#213334); +#213332 = CARTESIAN_POINT('',(196.952599,-72.492204,1.585)); +#213333 = DIRECTION('',(0.,0.,1.)); +#213334 = DIRECTION('',(-0.816375988017,0.577520775547,0.)); +#213335 = ORIENTED_EDGE('',*,*,#213336,.T.); +#213336 = EDGE_CURVE('',#213328,#213337,#213339,.T.); +#213337 = VERTEX_POINT('',#213338); +#213338 = CARTESIAN_POINT('',(196.776553,-72.668661,1.585)); +#213339 = LINE('',#213340,#213341); +#213340 = CARTESIAN_POINT('',(196.746146,-72.638253,1.585)); +#213341 = VECTOR('',#213342,1.); +#213342 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#213343 = ORIENTED_EDGE('',*,*,#213344,.T.); +#213344 = EDGE_CURVE('',#213337,#213345,#213347,.T.); +#213345 = VERTEX_POINT('',#213346); +#213346 = CARTESIAN_POINT('',(197.06865,-72.668661,1.585)); +#213347 = CIRCLE('',#213348,0.252888498466); +#213348 = AXIS2_PLACEMENT_3D('',#213349,#213350,#213351); +#213349 = CARTESIAN_POINT('',(196.9226015,-72.462209,1.585)); +#213350 = DIRECTION('',(0.,0.,1.)); +#213351 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#213352 = ORIENTED_EDGE('',*,*,#213353,.T.); +#213353 = EDGE_CURVE('',#213345,#213354,#213356,.T.); +#213354 = VERTEX_POINT('',#213355); +#213355 = CARTESIAN_POINT('',(197.099057,-72.638253,1.585)); +#213356 = LINE('',#213357,#213358); +#213357 = CARTESIAN_POINT('',(197.06865,-72.668661,1.585)); +#213358 = VECTOR('',#213359,1.); +#213359 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#213360 = ORIENTED_EDGE('',*,*,#213361,.T.); +#213361 = EDGE_CURVE('',#213354,#213362,#213364,.T.); +#213362 = VERTEX_POINT('',#213363); +#213363 = CARTESIAN_POINT('',(197.099058,-72.346155,1.585)); +#213364 = CIRCLE('',#213365,0.252885429722); +#213365 = AXIS2_PLACEMENT_3D('',#213366,#213367,#213368); +#213366 = CARTESIAN_POINT('',(196.89260961271,-72.49220329322,1.585)); +#213367 = DIRECTION('',(0.,-0.,1.)); +#213368 = DIRECTION('',(0.816367267623,-0.577533102387,-0.)); +#213369 = ORIENTED_EDGE('',*,*,#213370,.T.); +#213370 = EDGE_CURVE('',#213362,#213309,#213371,.T.); +#213371 = LINE('',#213372,#213373); +#213372 = CARTESIAN_POINT('',(197.099058,-72.346155,1.585)); +#213373 = VECTOR('',#213374,1.); +#213374 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#213375 = FACE_BOUND('',#213376,.F.); +#213376 = EDGE_LOOP('',(#213377,#213388,#213396,#213404,#213412,#213421, + #213429,#213438,#213446,#213454)); +#213377 = ORIENTED_EDGE('',*,*,#213378,.T.); +#213378 = EDGE_CURVE('',#213379,#213381,#213383,.T.); +#213379 = VERTEX_POINT('',#213380); +#213380 = CARTESIAN_POINT('',(197.068651,-71.887177,1.585)); +#213381 = VERTEX_POINT('',#213382); +#213382 = CARTESIAN_POINT('',(196.776553,-71.887177,1.585)); +#213383 = CIRCLE('',#213384,0.252889603602); +#213384 = AXIS2_PLACEMENT_3D('',#213385,#213386,#213387); +#213385 = CARTESIAN_POINT('',(196.922602,-72.09363,1.585)); +#213386 = DIRECTION('',(0.,0.,1.)); +#213387 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#213388 = ORIENTED_EDGE('',*,*,#213389,.T.); +#213389 = EDGE_CURVE('',#213381,#213390,#213392,.T.); +#213390 = VERTEX_POINT('',#213391); +#213391 = CARTESIAN_POINT('',(196.746146,-71.917584,1.585)); +#213392 = LINE('',#213393,#213394); +#213393 = CARTESIAN_POINT('',(196.776553,-71.887177,1.585)); +#213394 = VECTOR('',#213395,1.); +#213395 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#213396 = ORIENTED_EDGE('',*,*,#213397,.T.); +#213397 = EDGE_CURVE('',#213390,#213398,#213400,.T.); +#213398 = VERTEX_POINT('',#213399); +#213399 = CARTESIAN_POINT('',(196.711888,-71.9861,1.585)); +#213400 = LINE('',#213401,#213402); +#213401 = CARTESIAN_POINT('',(196.746146,-71.917584,1.585)); +#213402 = VECTOR('',#213403,1.); +#213403 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#213404 = ORIENTED_EDGE('',*,*,#213405,.T.); +#213405 = EDGE_CURVE('',#213398,#213406,#213408,.T.); +#213406 = VERTEX_POINT('',#213407); +#213407 = CARTESIAN_POINT('',(196.711888,-71.998309,1.585)); +#213408 = LINE('',#213409,#213410); +#213409 = CARTESIAN_POINT('',(196.711888,-71.9861,1.585)); +#213410 = VECTOR('',#213411,1.); +#213411 = DIRECTION('',(0.,-1.,0.)); +#213412 = ORIENTED_EDGE('',*,*,#213413,.T.); +#213413 = EDGE_CURVE('',#213406,#213414,#213416,.T.); +#213414 = VERTEX_POINT('',#213415); +#213415 = CARTESIAN_POINT('',(196.845069,-72.13149,1.585)); +#213416 = CIRCLE('',#213417,0.18686440374); +#213417 = AXIS2_PLACEMENT_3D('',#213418,#213419,#213420); +#213418 = CARTESIAN_POINT('',(196.892605,-71.950773,1.585)); +#213419 = DIRECTION('',(0.,0.,1.)); +#213420 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#213421 = ORIENTED_EDGE('',*,*,#213422,.T.); +#213422 = EDGE_CURVE('',#213414,#213423,#213425,.T.); +#213423 = VERTEX_POINT('',#213424); +#213424 = CARTESIAN_POINT('',(197.000135,-72.13149,1.585)); +#213425 = LINE('',#213426,#213427); +#213426 = CARTESIAN_POINT('',(196.845069,-72.13149,1.585)); +#213427 = VECTOR('',#213428,1.); +#213428 = DIRECTION('',(1.,0.,0.)); +#213429 = ORIENTED_EDGE('',*,*,#213430,.T.); +#213430 = EDGE_CURVE('',#213423,#213431,#213433,.T.); +#213431 = VERTEX_POINT('',#213432); +#213432 = CARTESIAN_POINT('',(197.133316,-71.998309,1.585)); +#213433 = CIRCLE('',#213434,0.18686440374); +#213434 = AXIS2_PLACEMENT_3D('',#213435,#213436,#213437); +#213435 = CARTESIAN_POINT('',(196.952599,-71.950773,1.585)); +#213436 = DIRECTION('',(0.,0.,1.)); +#213437 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#213438 = ORIENTED_EDGE('',*,*,#213439,.T.); +#213439 = EDGE_CURVE('',#213431,#213440,#213442,.T.); +#213440 = VERTEX_POINT('',#213441); +#213441 = CARTESIAN_POINT('',(197.133316,-71.9861,1.585)); +#213442 = LINE('',#213443,#213444); +#213443 = CARTESIAN_POINT('',(197.133316,-71.998309,1.585)); +#213444 = VECTOR('',#213445,1.); +#213445 = DIRECTION('',(0.,1.,0.)); +#213446 = ORIENTED_EDGE('',*,*,#213447,.T.); +#213447 = EDGE_CURVE('',#213440,#213448,#213450,.T.); +#213448 = VERTEX_POINT('',#213449); +#213449 = CARTESIAN_POINT('',(197.099058,-71.917584,1.585)); +#213450 = LINE('',#213451,#213452); +#213451 = CARTESIAN_POINT('',(197.133316,-71.9861,1.585)); +#213452 = VECTOR('',#213453,1.); +#213453 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#213454 = ORIENTED_EDGE('',*,*,#213455,.T.); +#213455 = EDGE_CURVE('',#213448,#213379,#213456,.T.); +#213456 = LINE('',#213457,#213458); +#213457 = CARTESIAN_POINT('',(197.099058,-71.917584,1.585)); +#213458 = VECTOR('',#213459,1.); +#213459 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#213460 = PLANE('',#213461); +#213461 = AXIS2_PLACEMENT_3D('',#213462,#213463,#213464); +#213462 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213463 = DIRECTION('',(0.,0.,1.)); +#213464 = DIRECTION('',(1.,0.,-0.)); +#213465 = SHELL_BASED_SURFACE_MODEL('',(#213466)); +#213466 = OPEN_SHELL('',(#213467)); +#213467 = ADVANCED_FACE('',(#213468,#213620),#213688,.T.); +#213468 = FACE_BOUND('',#213469,.F.); +#213469 = EDGE_LOOP('',(#213470,#213481,#213489,#213497,#213506,#213514, + #213522,#213530,#213539,#213547,#213555,#213564,#213572,#213581, + #213589,#213597,#213605,#213614)); +#213470 = ORIENTED_EDGE('',*,*,#213471,.T.); +#213471 = EDGE_CURVE('',#213472,#213474,#213476,.T.); +#213472 = VERTEX_POINT('',#213473); +#213473 = CARTESIAN_POINT('',(101.770503,-70.711919,1.585)); +#213474 = VERTEX_POINT('',#213475); +#213475 = CARTESIAN_POINT('',(102.018684,-70.467693,1.585)); +#213476 = CIRCLE('',#213477,0.3486213829); +#213477 = AXIS2_PLACEMENT_3D('',#213478,#213479,#213480); +#213478 = CARTESIAN_POINT('',(102.10644422951,-70.80508744383,1.585)); +#213479 = DIRECTION('',(0.,0.,-1.)); +#213480 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#213481 = ORIENTED_EDGE('',*,*,#213482,.T.); +#213482 = EDGE_CURVE('',#213474,#213483,#213485,.T.); +#213483 = VERTEX_POINT('',#213484); +#213484 = CARTESIAN_POINT('',(102.238424,-70.467693,1.585)); +#213485 = LINE('',#213486,#213487); +#213486 = CARTESIAN_POINT('',(102.018684,-70.467693,1.585)); +#213487 = VECTOR('',#213488,1.); +#213488 = DIRECTION('',(1.,0.,0.)); +#213489 = ORIENTED_EDGE('',*,*,#213490,.T.); +#213490 = EDGE_CURVE('',#213483,#213491,#213493,.T.); +#213491 = VERTEX_POINT('',#213492); +#213492 = CARTESIAN_POINT('',(102.273833,-70.48242,1.585)); +#213493 = LINE('',#213494,#213495); +#213494 = CARTESIAN_POINT('',(102.238424,-70.467693,1.585)); +#213495 = VECTOR('',#213496,1.); +#213496 = DIRECTION('',(0.923324376396,-0.3840209577,0.)); +#213497 = ORIENTED_EDGE('',*,*,#213498,.T.); +#213498 = EDGE_CURVE('',#213491,#213499,#213501,.T.); +#213499 = VERTEX_POINT('',#213500); +#213500 = CARTESIAN_POINT('',(102.360698,-70.478892,1.585)); +#213501 = CIRCLE('',#213502,7.226854941616E-02); +#213502 = AXIS2_PLACEMENT_3D('',#213503,#213504,#213505); +#213503 = CARTESIAN_POINT('',(102.31960843241,-70.53834274154,1.585)); +#213504 = DIRECTION('',(0.,0.,-1.)); +#213505 = DIRECTION('',(-0.633407378233,0.773818514382,0.)); +#213506 = ORIENTED_EDGE('',*,*,#213507,.T.); +#213507 = EDGE_CURVE('',#213499,#213508,#213510,.T.); +#213508 = VERTEX_POINT('',#213509); +#213509 = CARTESIAN_POINT('',(102.38139,-70.499584,1.585)); +#213510 = LINE('',#213511,#213512); +#213511 = CARTESIAN_POINT('',(102.360698,-70.478892,1.585)); +#213512 = VECTOR('',#213513,1.); +#213513 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#213514 = ORIENTED_EDGE('',*,*,#213515,.T.); +#213515 = EDGE_CURVE('',#213508,#213516,#213518,.T.); +#213516 = VERTEX_POINT('',#213517); +#213517 = CARTESIAN_POINT('',(102.39403,-70.541252,1.585)); +#213518 = LINE('',#213519,#213520); +#213519 = CARTESIAN_POINT('',(102.38139,-70.499584,1.585)); +#213520 = VECTOR('',#213521,1.); +#213521 = DIRECTION('',(0.29028783999,-0.956939376321,0.)); +#213522 = ORIENTED_EDGE('',*,*,#213523,.T.); +#213523 = EDGE_CURVE('',#213516,#213524,#213526,.T.); +#213524 = VERTEX_POINT('',#213525); +#213525 = CARTESIAN_POINT('',(102.391367,-71.370586,1.585)); +#213526 = LINE('',#213527,#213528); +#213527 = CARTESIAN_POINT('',(102.39403,-70.541252,1.585)); +#213528 = VECTOR('',#213529,1.); +#213529 = DIRECTION('',(-3.210993726964E-03,-0.999994844746,0.)); +#213530 = ORIENTED_EDGE('',*,*,#213531,.T.); +#213531 = EDGE_CURVE('',#213524,#213532,#213534,.T.); +#213532 = VERTEX_POINT('',#213533); +#213533 = CARTESIAN_POINT('',(102.143186,-71.614811,1.585)); +#213534 = CIRCLE('',#213535,0.348632345849); +#213535 = AXIS2_PLACEMENT_3D('',#213536,#213537,#213538); +#213536 = CARTESIAN_POINT('',(102.05541719403,-71.2774074593,1.585)); +#213537 = DIRECTION('',(0.,0.,-1.)); +#213538 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#213539 = ORIENTED_EDGE('',*,*,#213540,.T.); +#213540 = EDGE_CURVE('',#213532,#213541,#213543,.T.); +#213541 = VERTEX_POINT('',#213542); +#213542 = CARTESIAN_POINT('',(101.965887,-71.613589,1.585)); +#213543 = LINE('',#213544,#213545); +#213544 = CARTESIAN_POINT('',(102.143186,-71.614811,1.585)); +#213545 = VECTOR('',#213546,1.); +#213546 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#213547 = ORIENTED_EDGE('',*,*,#213548,.T.); +#213548 = EDGE_CURVE('',#213541,#213549,#213551,.T.); +#213549 = VERTEX_POINT('',#213550); +#213550 = CARTESIAN_POINT('',(101.844475,-71.552883,1.585)); +#213551 = LINE('',#213552,#213553); +#213552 = CARTESIAN_POINT('',(101.965887,-71.613589,1.585)); +#213553 = VECTOR('',#213554,1.); +#213554 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#213555 = ORIENTED_EDGE('',*,*,#213556,.T.); +#213556 = EDGE_CURVE('',#213549,#213557,#213559,.T.); +#213557 = VERTEX_POINT('',#213558); +#213558 = CARTESIAN_POINT('',(101.924,-71.426551,1.585)); +#213559 = CIRCLE('',#213560,7.500029440361E-02); +#213560 = AXIS2_PLACEMENT_3D('',#213561,#213562,#213563); +#213561 = CARTESIAN_POINT('',(101.89045894602,-71.49363335132,1.585)); +#213562 = DIRECTION('',(0.,0.,-1.)); +#213563 = DIRECTION('',(-0.613116873665,-0.789992214662,-0.)); +#213564 = ORIENTED_EDGE('',*,*,#213565,.T.); +#213565 = EDGE_CURVE('',#213557,#213566,#213568,.T.); +#213566 = VERTEX_POINT('',#213567); +#213567 = CARTESIAN_POINT('',(102.003402,-71.466252,1.585)); +#213568 = LINE('',#213569,#213570); +#213569 = CARTESIAN_POINT('',(101.924,-71.426551,1.585)); +#213570 = VECTOR('',#213571,1.); +#213571 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#213572 = ORIENTED_EDGE('',*,*,#213573,.T.); +#213573 = EDGE_CURVE('',#213566,#213574,#213576,.T.); +#213574 = VERTEX_POINT('',#213575); +#213575 = CARTESIAN_POINT('',(102.209772,-71.401587,1.585)); +#213576 = CIRCLE('',#213577,0.197624884179); +#213577 = AXIS2_PLACEMENT_3D('',#213578,#213579,#213580); +#213578 = CARTESIAN_POINT('',(102.0571255,-71.27606950765,1.585)); +#213579 = DIRECTION('',(0.,0.,1.)); +#213580 = DIRECTION('',(-0.271845826618,-0.962340816213,0.)); +#213581 = ORIENTED_EDGE('',*,*,#213582,.T.); +#213582 = EDGE_CURVE('',#213574,#213583,#213585,.T.); +#213583 = VERTEX_POINT('',#213584); +#213584 = CARTESIAN_POINT('',(102.24403,-71.333071,1.585)); +#213585 = LINE('',#213586,#213587); +#213586 = CARTESIAN_POINT('',(102.209772,-71.401587,1.585)); +#213587 = VECTOR('',#213588,1.); +#213588 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#213589 = ORIENTED_EDGE('',*,*,#213590,.T.); +#213590 = EDGE_CURVE('',#213583,#213591,#213593,.T.); +#213591 = VERTEX_POINT('',#213592); +#213592 = CARTESIAN_POINT('',(102.243601,-71.280256,1.585)); +#213593 = LINE('',#213594,#213595); +#213594 = CARTESIAN_POINT('',(102.24403,-71.333071,1.585)); +#213595 = VECTOR('',#213596,1.); +#213596 = DIRECTION('',(-8.122424470089E-03,0.999967012566,0.)); +#213597 = ORIENTED_EDGE('',*,*,#213598,.T.); +#213598 = EDGE_CURVE('',#213591,#213599,#213601,.T.); +#213599 = VERTEX_POINT('',#213600); +#213600 = CARTESIAN_POINT('',(102.013506,-71.280256,1.585)); +#213601 = LINE('',#213602,#213603); +#213602 = CARTESIAN_POINT('',(102.243601,-71.280256,1.585)); +#213603 = VECTOR('',#213604,1.); +#213604 = DIRECTION('',(-1.,0.,0.)); +#213605 = ORIENTED_EDGE('',*,*,#213606,.T.); +#213606 = EDGE_CURVE('',#213599,#213607,#213609,.T.); +#213607 = VERTEX_POINT('',#213608); +#213608 = CARTESIAN_POINT('',(101.769281,-71.032074,1.585)); +#213609 = CIRCLE('',#213610,0.348628446662); +#213610 = AXIS2_PLACEMENT_3D('',#213611,#213612,#213613); +#213611 = CARTESIAN_POINT('',(102.10668161322,-70.94430942847,1.585)); +#213612 = DIRECTION('',(0.,0.,-1.)); +#213613 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#213614 = ORIENTED_EDGE('',*,*,#213615,.T.); +#213615 = EDGE_CURVE('',#213607,#213472,#213616,.T.); +#213616 = LINE('',#213617,#213618); +#213617 = CARTESIAN_POINT('',(101.769281,-71.032074,1.585)); +#213618 = VECTOR('',#213619,1.); +#213619 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#213620 = FACE_BOUND('',#213621,.F.); +#213621 = EDGE_LOOP('',(#213622,#213632,#213640,#213649,#213657,#213666, + #213674,#213682)); +#213622 = ORIENTED_EDGE('',*,*,#213623,.T.); +#213623 = EDGE_CURVE('',#213624,#213626,#213628,.T.); +#213624 = VERTEX_POINT('',#213625); +#213625 = CARTESIAN_POINT('',(102.24403,-70.635223,1.585)); +#213626 = VERTEX_POINT('',#213627); +#213627 = CARTESIAN_POINT('',(102.206087,-70.616252,1.585)); +#213628 = LINE('',#213629,#213630); +#213629 = CARTESIAN_POINT('',(102.24403,-70.635223,1.585)); +#213630 = VECTOR('',#213631,1.); +#213631 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#213632 = ORIENTED_EDGE('',*,*,#213633,.T.); +#213633 = EDGE_CURVE('',#213626,#213634,#213636,.T.); +#213634 = VERTEX_POINT('',#213635); +#213635 = CARTESIAN_POINT('',(102.051021,-70.616252,1.585)); +#213636 = LINE('',#213637,#213638); +#213637 = CARTESIAN_POINT('',(102.206087,-70.616252,1.585)); +#213638 = VECTOR('',#213639,1.); +#213639 = DIRECTION('',(-1.,0.,0.)); +#213640 = ORIENTED_EDGE('',*,*,#213641,.T.); +#213641 = EDGE_CURVE('',#213634,#213642,#213644,.T.); +#213642 = VERTEX_POINT('',#213643); +#213643 = CARTESIAN_POINT('',(101.91784,-70.749433,1.585)); +#213644 = CIRCLE('',#213645,0.18686440374); +#213645 = AXIS2_PLACEMENT_3D('',#213646,#213647,#213648); +#213646 = CARTESIAN_POINT('',(102.098557,-70.796969,1.585)); +#213647 = DIRECTION('',(0.,0.,1.)); +#213648 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#213649 = ORIENTED_EDGE('',*,*,#213650,.T.); +#213650 = EDGE_CURVE('',#213642,#213651,#213653,.T.); +#213651 = VERTEX_POINT('',#213652); +#213652 = CARTESIAN_POINT('',(101.91784,-70.999737,1.585)); +#213653 = LINE('',#213654,#213655); +#213654 = CARTESIAN_POINT('',(101.91784,-70.749433,1.585)); +#213655 = VECTOR('',#213656,1.); +#213656 = DIRECTION('',(0.,-1.,0.)); +#213657 = ORIENTED_EDGE('',*,*,#213658,.T.); +#213658 = EDGE_CURVE('',#213651,#213659,#213661,.T.); +#213659 = VERTEX_POINT('',#213660); +#213660 = CARTESIAN_POINT('',(102.051021,-71.132919,1.585)); +#213661 = CIRCLE('',#213662,0.186867373533); +#213662 = AXIS2_PLACEMENT_3D('',#213663,#213664,#213665); +#213663 = CARTESIAN_POINT('',(102.09855971388,-70.95219964305,1.585)); +#213664 = DIRECTION('',(0.,0.,1.)); +#213665 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#213666 = ORIENTED_EDGE('',*,*,#213667,.T.); +#213667 = EDGE_CURVE('',#213659,#213668,#213670,.T.); +#213668 = VERTEX_POINT('',#213669); +#213669 = CARTESIAN_POINT('',(102.206087,-71.132919,1.585)); +#213670 = LINE('',#213671,#213672); +#213671 = CARTESIAN_POINT('',(102.051021,-71.132919,1.585)); +#213672 = VECTOR('',#213673,1.); +#213673 = DIRECTION('',(1.,0.,0.)); +#213674 = ORIENTED_EDGE('',*,*,#213675,.T.); +#213675 = EDGE_CURVE('',#213668,#213676,#213678,.T.); +#213676 = VERTEX_POINT('',#213677); +#213677 = CARTESIAN_POINT('',(102.24403,-71.113947,1.585)); +#213678 = LINE('',#213679,#213680); +#213679 = CARTESIAN_POINT('',(102.206087,-71.132919,1.585)); +#213680 = VECTOR('',#213681,1.); +#213681 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#213682 = ORIENTED_EDGE('',*,*,#213683,.T.); +#213683 = EDGE_CURVE('',#213676,#213624,#213684,.T.); +#213684 = LINE('',#213685,#213686); +#213685 = CARTESIAN_POINT('',(102.24403,-71.113947,1.585)); +#213686 = VECTOR('',#213687,1.); +#213687 = DIRECTION('',(0.,1.,0.)); +#213688 = PLANE('',#213689); +#213689 = AXIS2_PLACEMENT_3D('',#213690,#213691,#213692); +#213690 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213691 = DIRECTION('',(0.,0.,1.)); +#213692 = DIRECTION('',(1.,0.,-0.)); +#213693 = SHELL_BASED_SURFACE_MODEL('',(#213694)); +#213694 = OPEN_SHELL('',(#213695)); +#213695 = ADVANCED_FACE('',(#213696,#213807),#213859,.T.); +#213696 = FACE_BOUND('',#213697,.F.); +#213697 = EDGE_LOOP('',(#213698,#213709,#213717,#213726,#213734,#213743, + #213751,#213759,#213768,#213776,#213784,#213792,#213801)); +#213698 = ORIENTED_EDGE('',*,*,#213699,.T.); +#213699 = EDGE_CURVE('',#213700,#213702,#213704,.T.); +#213700 = VERTEX_POINT('',#213701); +#213701 = CARTESIAN_POINT('',(100.34071,-70.193287,1.585)); +#213702 = VERTEX_POINT('',#213703); +#213703 = CARTESIAN_POINT('',(100.414269,-70.132919,1.585)); +#213704 = CIRCLE('',#213705,7.500074938988E-02); +#213705 = AXIS2_PLACEMENT_3D('',#213706,#213707,#213708); +#213706 = CARTESIAN_POINT('',(100.41426946611,-70.20791974938,1.585)); +#213707 = DIRECTION('',(0.,0.,-1.)); +#213708 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#213709 = ORIENTED_EDGE('',*,*,#213710,.T.); +#213710 = EDGE_CURVE('',#213702,#213711,#213713,.T.); +#213711 = VERTEX_POINT('',#213712); +#213712 = CARTESIAN_POINT('',(100.809853,-70.13436,1.585)); +#213713 = LINE('',#213714,#213715); +#213714 = CARTESIAN_POINT('',(100.414269,-70.132919,1.585)); +#213715 = VECTOR('',#213716,1.); +#213716 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#213717 = ORIENTED_EDGE('',*,*,#213718,.T.); +#213718 = EDGE_CURVE('',#213711,#213719,#213721,.T.); +#213719 = VERTEX_POINT('',#213720); +#213720 = CARTESIAN_POINT('',(101.059256,-70.383763,1.585)); +#213721 = CIRCLE('',#213722,0.347870264855); +#213722 = AXIS2_PLACEMENT_3D('',#213723,#213724,#213725); +#213723 = CARTESIAN_POINT('',(100.72252526502,-70.47109073497,1.585)); +#213724 = DIRECTION('',(0.,0.,-1.)); +#213725 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#213726 = ORIENTED_EDGE('',*,*,#213727,.T.); +#213727 = EDGE_CURVE('',#213719,#213728,#213730,.T.); +#213728 = VERTEX_POINT('',#213729); +#213729 = CARTESIAN_POINT('',(101.058034,-70.561062,1.585)); +#213730 = LINE('',#213731,#213732); +#213731 = CARTESIAN_POINT('',(101.059256,-70.383763,1.585)); +#213732 = VECTOR('',#213733,1.); +#213733 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#213734 = ORIENTED_EDGE('',*,*,#213735,.T.); +#213735 = EDGE_CURVE('',#213728,#213736,#213738,.T.); +#213736 = VERTEX_POINT('',#213737); +#213737 = CARTESIAN_POINT('',(100.809853,-70.805287,1.585)); +#213738 = CIRCLE('',#213739,0.348632345849); +#213739 = AXIS2_PLACEMENT_3D('',#213740,#213741,#213742); +#213740 = CARTESIAN_POINT('',(100.72208419403,-70.4678834593,1.585)); +#213741 = DIRECTION('',(0.,0.,-1.)); +#213742 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#213743 = ORIENTED_EDGE('',*,*,#213744,.T.); +#213744 = EDGE_CURVE('',#213736,#213745,#213747,.T.); +#213745 = VERTEX_POINT('',#213746); +#213746 = CARTESIAN_POINT('',(100.796336,-70.806618,1.585)); +#213747 = LINE('',#213748,#213749); +#213748 = CARTESIAN_POINT('',(100.809853,-70.805287,1.585)); +#213749 = VECTOR('',#213750,1.); +#213750 = DIRECTION('',(-0.995186940545,-9.799465989924E-02,0.)); +#213751 = ORIENTED_EDGE('',*,*,#213752,.T.); +#213752 = EDGE_CURVE('',#213745,#213753,#213755,.T.); +#213753 = VERTEX_POINT('',#213754); +#213754 = CARTESIAN_POINT('',(101.05435,-71.177723,1.585)); +#213755 = LINE('',#213756,#213757); +#213756 = CARTESIAN_POINT('',(100.796336,-70.806618,1.585)); +#213757 = VECTOR('',#213758,1.); +#213758 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#213759 = ORIENTED_EDGE('',*,*,#213760,.T.); +#213760 = EDGE_CURVE('',#213753,#213761,#213763,.T.); +#213761 = VERTEX_POINT('',#213762); +#213762 = CARTESIAN_POINT('',(100.924255,-71.250929,1.585)); +#213763 = CIRCLE('',#213764,7.500005951702E-02); +#213764 = AXIS2_PLACEMENT_3D('',#213765,#213766,#213767); +#213765 = CARTESIAN_POINT('',(100.98569706294,-71.20791874739,1.585)); +#213766 = DIRECTION('',(0.,0.,-1.)); +#213767 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#213768 = ORIENTED_EDGE('',*,*,#213769,.T.); +#213769 = EDGE_CURVE('',#213761,#213770,#213772,.T.); +#213770 = VERTEX_POINT('',#213771); +#213771 = CARTESIAN_POINT('',(100.613315,-70.806728,1.585)); +#213772 = LINE('',#213773,#213774); +#213773 = CARTESIAN_POINT('',(100.924255,-71.250929,1.585)); +#213774 = VECTOR('',#213775,1.); +#213775 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#213776 = ORIENTED_EDGE('',*,*,#213777,.T.); +#213777 = EDGE_CURVE('',#213770,#213778,#213780,.T.); +#213778 = VERTEX_POINT('',#213779); +#213779 = CARTESIAN_POINT('',(100.489269,-70.806728,1.585)); +#213780 = LINE('',#213781,#213782); +#213781 = CARTESIAN_POINT('',(100.613315,-70.806728,1.585)); +#213782 = VECTOR('',#213783,1.); +#213783 = DIRECTION('',(-1.,0.,0.)); +#213784 = ORIENTED_EDGE('',*,*,#213785,.T.); +#213785 = EDGE_CURVE('',#213778,#213786,#213788,.T.); +#213786 = VERTEX_POINT('',#213787); +#213787 = CARTESIAN_POINT('',(100.487828,-71.222551,1.585)); +#213788 = LINE('',#213789,#213790); +#213789 = CARTESIAN_POINT('',(100.489269,-70.806728,1.585)); +#213790 = VECTOR('',#213791,1.); +#213791 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#213792 = ORIENTED_EDGE('',*,*,#213793,.T.); +#213793 = EDGE_CURVE('',#213786,#213794,#213796,.T.); +#213794 = VERTEX_POINT('',#213795); +#213795 = CARTESIAN_POINT('',(100.339269,-71.207919,1.585)); +#213796 = CIRCLE('',#213797,7.500006711463E-02); +#213797 = AXIS2_PLACEMENT_3D('',#213798,#213799,#213800); +#213798 = CARTESIAN_POINT('',(100.41426906711,-71.20791906711,1.585)); +#213799 = DIRECTION('',(-0.,0.,-1.)); +#213800 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#213801 = ORIENTED_EDGE('',*,*,#213802,.T.); +#213802 = EDGE_CURVE('',#213794,#213700,#213803,.T.); +#213803 = LINE('',#213804,#213805); +#213804 = CARTESIAN_POINT('',(100.339269,-71.207919,1.585)); +#213805 = VECTOR('',#213806,1.); +#213806 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#213807 = FACE_BOUND('',#213808,.F.); +#213808 = EDGE_LOOP('',(#213809,#213820,#213828,#213836,#213844,#213853) + ); +#213809 = ORIENTED_EDGE('',*,*,#213810,.T.); +#213810 = EDGE_CURVE('',#213811,#213813,#213815,.T.); +#213811 = VERTEX_POINT('',#213812); +#213812 = CARTESIAN_POINT('',(100.910697,-70.4161,1.585)); +#213813 = VERTEX_POINT('',#213814); +#213814 = CARTESIAN_POINT('',(100.777516,-70.282919,1.585)); +#213815 = CIRCLE('',#213816,0.18686440374); +#213816 = AXIS2_PLACEMENT_3D('',#213817,#213818,#213819); +#213817 = CARTESIAN_POINT('',(100.72998,-70.463636,1.585)); +#213818 = DIRECTION('',(0.,0.,1.)); +#213819 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#213820 = ORIENTED_EDGE('',*,*,#213821,.T.); +#213821 = EDGE_CURVE('',#213813,#213822,#213824,.T.); +#213822 = VERTEX_POINT('',#213823); +#213823 = CARTESIAN_POINT('',(100.489269,-70.282919,1.585)); +#213824 = LINE('',#213825,#213826); +#213825 = CARTESIAN_POINT('',(100.777516,-70.282919,1.585)); +#213826 = VECTOR('',#213827,1.); +#213827 = DIRECTION('',(-1.,0.,0.)); +#213828 = ORIENTED_EDGE('',*,*,#213829,.T.); +#213829 = EDGE_CURVE('',#213822,#213830,#213832,.T.); +#213830 = VERTEX_POINT('',#213831); +#213831 = CARTESIAN_POINT('',(100.489269,-70.656728,1.585)); +#213832 = LINE('',#213833,#213834); +#213833 = CARTESIAN_POINT('',(100.489269,-70.282919,1.585)); +#213834 = VECTOR('',#213835,1.); +#213835 = DIRECTION('',(0.,-1.,0.)); +#213836 = ORIENTED_EDGE('',*,*,#213837,.T.); +#213837 = EDGE_CURVE('',#213830,#213838,#213840,.T.); +#213838 = VERTEX_POINT('',#213839); +#213839 = CARTESIAN_POINT('',(100.777516,-70.656728,1.585)); +#213840 = LINE('',#213841,#213842); +#213841 = CARTESIAN_POINT('',(100.489269,-70.656728,1.585)); +#213842 = VECTOR('',#213843,1.); +#213843 = DIRECTION('',(1.,0.,0.)); +#213844 = ORIENTED_EDGE('',*,*,#213845,.T.); +#213845 = EDGE_CURVE('',#213838,#213846,#213848,.T.); +#213846 = VERTEX_POINT('',#213847); +#213847 = CARTESIAN_POINT('',(100.910697,-70.523547,1.585)); +#213848 = CIRCLE('',#213849,0.18686440374); +#213849 = AXIS2_PLACEMENT_3D('',#213850,#213851,#213852); +#213850 = CARTESIAN_POINT('',(100.72998,-70.476011,1.585)); +#213851 = DIRECTION('',(0.,0.,1.)); +#213852 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#213853 = ORIENTED_EDGE('',*,*,#213854,.T.); +#213854 = EDGE_CURVE('',#213846,#213811,#213855,.T.); +#213855 = LINE('',#213856,#213857); +#213856 = CARTESIAN_POINT('',(100.910697,-70.523547,1.585)); +#213857 = VECTOR('',#213858,1.); +#213858 = DIRECTION('',(0.,1.,0.)); +#213859 = PLANE('',#213860); +#213860 = AXIS2_PLACEMENT_3D('',#213861,#213862,#213863); +#213861 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213862 = DIRECTION('',(0.,0.,1.)); +#213863 = DIRECTION('',(1.,0.,-0.)); +#213864 = SHELL_BASED_SURFACE_MODEL('',(#213865)); +#213865 = OPEN_SHELL('',(#213866)); +#213866 = ADVANCED_FACE('',(#213867),#213919,.T.); +#213867 = FACE_BOUND('',#213868,.F.); +#213868 = EDGE_LOOP('',(#213869,#213880,#213888,#213897,#213905,#213913) + ); +#213869 = ORIENTED_EDGE('',*,*,#213870,.T.); +#213870 = EDGE_CURVE('',#213871,#213873,#213875,.T.); +#213871 = VERTEX_POINT('',#213872); +#213872 = CARTESIAN_POINT('',(101.372601,-70.478892,1.585)); +#213873 = VERTEX_POINT('',#213874); +#213874 = CARTESIAN_POINT('',(101.489269,-70.541252,1.585)); +#213875 = CIRCLE('',#213876,7.500000000002E-02); +#213876 = AXIS2_PLACEMENT_3D('',#213877,#213878,#213879); +#213877 = CARTESIAN_POINT('',(101.414269,-70.54125206555,1.585)); +#213878 = DIRECTION('',(0.,0.,-1.)); +#213879 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#213880 = ORIENTED_EDGE('',*,*,#213881,.T.); +#213881 = EDGE_CURVE('',#213873,#213882,#213884,.T.); +#213882 = VERTEX_POINT('',#213883); +#213883 = CARTESIAN_POINT('',(101.487828,-71.222551,1.585)); +#213884 = LINE('',#213885,#213886); +#213885 = CARTESIAN_POINT('',(101.489269,-70.541252,1.585)); +#213886 = VECTOR('',#213887,1.); +#213887 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#213888 = ORIENTED_EDGE('',*,*,#213889,.T.); +#213889 = EDGE_CURVE('',#213882,#213890,#213892,.T.); +#213890 = VERTEX_POINT('',#213891); +#213891 = CARTESIAN_POINT('',(101.339269,-71.207919,1.585)); +#213892 = CIRCLE('',#213893,7.500006711463E-02); +#213893 = AXIS2_PLACEMENT_3D('',#213894,#213895,#213896); +#213894 = CARTESIAN_POINT('',(101.41426906711,-71.20791906711,1.585)); +#213895 = DIRECTION('',(-0.,0.,-1.)); +#213896 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#213897 = ORIENTED_EDGE('',*,*,#213898,.T.); +#213898 = EDGE_CURVE('',#213890,#213899,#213901,.T.); +#213899 = VERTEX_POINT('',#213900); +#213900 = CARTESIAN_POINT('',(101.34071,-70.52662,1.585)); +#213901 = LINE('',#213902,#213903); +#213902 = CARTESIAN_POINT('',(101.339269,-71.207919,1.585)); +#213903 = VECTOR('',#213904,1.); +#213904 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#213905 = ORIENTED_EDGE('',*,*,#213906,.T.); +#213906 = EDGE_CURVE('',#213899,#213907,#213909,.T.); +#213907 = VERTEX_POINT('',#213908); +#213908 = CARTESIAN_POINT('',(101.351909,-70.499584,1.585)); +#213909 = LINE('',#213910,#213911); +#213910 = CARTESIAN_POINT('',(101.34071,-70.52662,1.585)); +#213911 = VECTOR('',#213912,1.); +#213912 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#213913 = ORIENTED_EDGE('',*,*,#213914,.T.); +#213914 = EDGE_CURVE('',#213907,#213871,#213915,.T.); +#213915 = LINE('',#213916,#213917); +#213916 = CARTESIAN_POINT('',(101.351909,-70.499584,1.585)); +#213917 = VECTOR('',#213918,1.); +#213918 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#213919 = PLANE('',#213920); +#213920 = AXIS2_PLACEMENT_3D('',#213921,#213922,#213923); +#213921 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213922 = DIRECTION('',(0.,0.,1.)); +#213923 = DIRECTION('',(1.,0.,-0.)); +#213924 = SHELL_BASED_SURFACE_MODEL('',(#213925)); +#213925 = OPEN_SHELL('',(#213926)); +#213926 = ADVANCED_FACE('',(#213927),#214052,.T.); +#213927 = FACE_BOUND('',#213928,.F.); +#213928 = EDGE_LOOP('',(#213929,#213939,#213947,#213956,#213964,#213973, + #213981,#213989,#213997,#214005,#214014,#214022,#214030,#214038, + #214046)); +#213929 = ORIENTED_EDGE('',*,*,#213930,.T.); +#213930 = EDGE_CURVE('',#213931,#213933,#213935,.T.); +#213931 = VERTEX_POINT('',#213932); +#213932 = CARTESIAN_POINT('',(87.323126,-68.357667,1.585)); +#213933 = VERTEX_POINT('',#213934); +#213934 = CARTESIAN_POINT('',(87.346087,-68.3531,1.585)); +#213935 = LINE('',#213936,#213937); +#213936 = CARTESIAN_POINT('',(87.323126,-68.357667,1.585)); +#213937 = VECTOR('',#213938,1.); +#213938 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#213939 = ORIENTED_EDGE('',*,*,#213940,.T.); +#213940 = EDGE_CURVE('',#213933,#213941,#213943,.T.); +#213941 = VERTEX_POINT('',#213942); +#213942 = CARTESIAN_POINT('',(93.10165,-68.3531,1.585)); +#213943 = LINE('',#213944,#213945); +#213944 = CARTESIAN_POINT('',(87.346087,-68.3531,1.585)); +#213945 = VECTOR('',#213946,1.); +#213946 = DIRECTION('',(1.,0.,0.)); +#213947 = ORIENTED_EDGE('',*,*,#213948,.T.); +#213948 = EDGE_CURVE('',#213941,#213949,#213951,.T.); +#213949 = VERTEX_POINT('',#213950); +#213950 = CARTESIAN_POINT('',(93.16165,-68.4131,1.585)); +#213951 = CIRCLE('',#213952,5.99993201626E-02); +#213952 = AXIS2_PLACEMENT_3D('',#213953,#213954,#213955); +#213953 = CARTESIAN_POINT('',(93.101650679841,-68.41309932015,1.585)); +#213954 = DIRECTION('',(0.,0.,-1.)); +#213955 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#213956 = ORIENTED_EDGE('',*,*,#213957,.T.); +#213957 = EDGE_CURVE('',#213949,#213958,#213960,.T.); +#213958 = VERTEX_POINT('',#213959); +#213959 = CARTESIAN_POINT('',(93.16165,-70.7631,1.585)); +#213960 = LINE('',#213961,#213962); +#213961 = CARTESIAN_POINT('',(93.16165,-68.4131,1.585)); +#213962 = VECTOR('',#213963,1.); +#213963 = DIRECTION('',(0.,-1.,0.)); +#213964 = ORIENTED_EDGE('',*,*,#213965,.T.); +#213965 = EDGE_CURVE('',#213958,#213966,#213968,.T.); +#213966 = VERTEX_POINT('',#213967); +#213967 = CARTESIAN_POINT('',(93.04165,-70.7631,1.585)); +#213968 = CIRCLE('',#213969,6.000000000042E-02); +#213969 = AXIS2_PLACEMENT_3D('',#213970,#213971,#213972); +#213970 = CARTESIAN_POINT('',(93.10165,-70.76310022558,1.585)); +#213971 = DIRECTION('',(0.,0.,-1.)); +#213972 = DIRECTION('',(0.999999999993,3.759794490532E-06,0.)); +#213973 = ORIENTED_EDGE('',*,*,#213974,.T.); +#213974 = EDGE_CURVE('',#213966,#213975,#213977,.T.); +#213975 = VERTEX_POINT('',#213976); +#213976 = CARTESIAN_POINT('',(93.04165,-68.4731,1.585)); +#213977 = LINE('',#213978,#213979); +#213978 = CARTESIAN_POINT('',(93.04165,-70.7631,1.585)); +#213979 = VECTOR('',#213980,1.); +#213980 = DIRECTION('',(0.,1.,0.)); +#213981 = ORIENTED_EDGE('',*,*,#213982,.T.); +#213982 = EDGE_CURVE('',#213975,#213983,#213985,.T.); +#213983 = VERTEX_POINT('',#213984); +#213984 = CARTESIAN_POINT('',(87.37094,-68.4731,1.585)); +#213985 = LINE('',#213986,#213987); +#213986 = CARTESIAN_POINT('',(93.04165,-68.4731,1.585)); +#213987 = VECTOR('',#213988,1.); +#213988 = DIRECTION('',(-1.,0.,0.)); +#213989 = ORIENTED_EDGE('',*,*,#213990,.T.); +#213990 = EDGE_CURVE('',#213983,#213991,#213993,.T.); +#213991 = VERTEX_POINT('',#213992); +#213992 = CARTESIAN_POINT('',(86.34165,-69.502389,1.585)); +#213993 = LINE('',#213994,#213995); +#213994 = CARTESIAN_POINT('',(87.37094,-68.4731,1.585)); +#213995 = VECTOR('',#213996,1.); +#213996 = DIRECTION('',(-0.707107124679,-0.707106437694,0.)); +#213997 = ORIENTED_EDGE('',*,*,#213998,.T.); +#213998 = EDGE_CURVE('',#213991,#213999,#214001,.T.); +#213999 = VERTEX_POINT('',#214000); +#214000 = CARTESIAN_POINT('',(86.34165,-70.7631,1.585)); +#214001 = LINE('',#214002,#214003); +#214002 = CARTESIAN_POINT('',(86.34165,-69.502389,1.585)); +#214003 = VECTOR('',#214004,1.); +#214004 = DIRECTION('',(0.,-1.,0.)); +#214005 = ORIENTED_EDGE('',*,*,#214006,.T.); +#214006 = EDGE_CURVE('',#213999,#214007,#214009,.T.); +#214007 = VERTEX_POINT('',#214008); +#214008 = CARTESIAN_POINT('',(86.22165,-70.7631,1.585)); +#214009 = CIRCLE('',#214010,6.000000000043E-02); +#214010 = AXIS2_PLACEMENT_3D('',#214011,#214012,#214013); +#214011 = CARTESIAN_POINT('',(86.28165,-70.76310022558,1.585)); +#214012 = DIRECTION('',(0.,0.,-1.)); +#214013 = DIRECTION('',(0.999999999993,3.759794253683E-06,0.)); +#214014 = ORIENTED_EDGE('',*,*,#214015,.T.); +#214015 = EDGE_CURVE('',#214007,#214016,#214018,.T.); +#214016 = VERTEX_POINT('',#214017); +#214017 = CARTESIAN_POINT('',(86.22165,-69.477537,1.585)); +#214018 = LINE('',#214019,#214020); +#214019 = CARTESIAN_POINT('',(86.22165,-70.7631,1.585)); +#214020 = VECTOR('',#214021,1.); +#214021 = DIRECTION('',(0.,1.,0.)); +#214022 = ORIENTED_EDGE('',*,*,#214023,.T.); +#214023 = EDGE_CURVE('',#214016,#214024,#214026,.T.); +#214024 = VERTEX_POINT('',#214025); +#214025 = CARTESIAN_POINT('',(86.226217,-69.454576,1.585)); +#214026 = LINE('',#214027,#214028); +#214027 = CARTESIAN_POINT('',(86.22165,-69.477537,1.585)); +#214028 = VECTOR('',#214029,1.); +#214029 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#214030 = ORIENTED_EDGE('',*,*,#214031,.T.); +#214031 = EDGE_CURVE('',#214024,#214032,#214034,.T.); +#214032 = VERTEX_POINT('',#214033); +#214033 = CARTESIAN_POINT('',(86.239224,-69.435111,1.585)); +#214034 = LINE('',#214035,#214036); +#214035 = CARTESIAN_POINT('',(86.226217,-69.454576,1.585)); +#214036 = VECTOR('',#214037,1.); +#214037 = DIRECTION('',(0.555596893534,0.831451797698,0.)); +#214038 = ORIENTED_EDGE('',*,*,#214039,.T.); +#214039 = EDGE_CURVE('',#214032,#214040,#214042,.T.); +#214040 = VERTEX_POINT('',#214041); +#214041 = CARTESIAN_POINT('',(87.30366,-68.370674,1.585)); +#214042 = LINE('',#214043,#214044); +#214043 = CARTESIAN_POINT('',(86.239224,-69.435111,1.585)); +#214044 = VECTOR('',#214045,1.); +#214045 = DIRECTION('',(0.707106449036,0.707107113337,0.)); +#214046 = ORIENTED_EDGE('',*,*,#214047,.T.); +#214047 = EDGE_CURVE('',#214040,#213931,#214048,.T.); +#214048 = LINE('',#214049,#214050); +#214049 = CARTESIAN_POINT('',(87.30366,-68.370674,1.585)); +#214050 = VECTOR('',#214051,1.); +#214051 = DIRECTION('',(0.831464982668,0.555577161695,0.)); +#214052 = PLANE('',#214053); +#214053 = AXIS2_PLACEMENT_3D('',#214054,#214055,#214056); +#214054 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214055 = DIRECTION('',(0.,0.,1.)); +#214056 = DIRECTION('',(1.,0.,-0.)); +#214057 = SHELL_BASED_SURFACE_MODEL('',(#214058)); +#214058 = OPEN_SHELL('',(#214059)); +#214059 = ADVANCED_FACE('',(#214060,#214171),#214230,.T.); +#214060 = FACE_BOUND('',#214061,.F.); +#214061 = EDGE_LOOP('',(#214062,#214072,#214081,#214089,#214097,#214105, + #214114,#214122,#214131,#214139,#214148,#214156,#214165)); +#214062 = ORIENTED_EDGE('',*,*,#214063,.T.); +#214063 = EDGE_CURVE('',#214064,#214066,#214068,.T.); +#214064 = VERTEX_POINT('',#214065); +#214065 = CARTESIAN_POINT('',(179.850168,-70.155317,1.585)); +#214066 = VERTEX_POINT('',#214067); +#214067 = CARTESIAN_POINT('',(180.221273,-69.897304,1.585)); +#214068 = LINE('',#214069,#214070); +#214069 = CARTESIAN_POINT('',(179.850168,-70.155317,1.585)); +#214070 = VECTOR('',#214071,1.); +#214071 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#214072 = ORIENTED_EDGE('',*,*,#214073,.T.); +#214073 = EDGE_CURVE('',#214066,#214074,#214076,.T.); +#214074 = VERTEX_POINT('',#214075); +#214075 = CARTESIAN_POINT('',(180.294479,-70.027399,1.585)); +#214076 = CIRCLE('',#214077,7.500005951702E-02); +#214077 = AXIS2_PLACEMENT_3D('',#214078,#214079,#214080); +#214078 = CARTESIAN_POINT('',(180.25146874739,-69.96595693705,1.585)); +#214079 = DIRECTION('',(0.,0.,-1.)); +#214080 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#214081 = ORIENTED_EDGE('',*,*,#214082,.T.); +#214082 = EDGE_CURVE('',#214074,#214083,#214085,.T.); +#214083 = VERTEX_POINT('',#214084); +#214084 = CARTESIAN_POINT('',(179.850278,-70.338339,1.585)); +#214085 = LINE('',#214086,#214087); +#214086 = CARTESIAN_POINT('',(180.294479,-70.027399,1.585)); +#214087 = VECTOR('',#214088,1.); +#214088 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#214089 = ORIENTED_EDGE('',*,*,#214090,.T.); +#214090 = EDGE_CURVE('',#214083,#214091,#214093,.T.); +#214091 = VERTEX_POINT('',#214092); +#214092 = CARTESIAN_POINT('',(179.850278,-70.462385,1.585)); +#214093 = LINE('',#214094,#214095); +#214094 = CARTESIAN_POINT('',(179.850278,-70.338339,1.585)); +#214095 = VECTOR('',#214096,1.); +#214096 = DIRECTION('',(0.,-1.,0.)); +#214097 = ORIENTED_EDGE('',*,*,#214098,.T.); +#214098 = EDGE_CURVE('',#214091,#214099,#214101,.T.); +#214099 = VERTEX_POINT('',#214100); +#214100 = CARTESIAN_POINT('',(180.266101,-70.463826,1.585)); +#214101 = LINE('',#214102,#214103); +#214102 = CARTESIAN_POINT('',(179.850278,-70.462385,1.585)); +#214103 = VECTOR('',#214104,1.); +#214104 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#214105 = ORIENTED_EDGE('',*,*,#214106,.T.); +#214106 = EDGE_CURVE('',#214099,#214107,#214109,.T.); +#214107 = VERTEX_POINT('',#214108); +#214108 = CARTESIAN_POINT('',(180.251469,-70.612385,1.585)); +#214109 = CIRCLE('',#214110,7.500006711463E-02); +#214110 = AXIS2_PLACEMENT_3D('',#214111,#214112,#214113); +#214111 = CARTESIAN_POINT('',(180.25146906711,-70.53738493288,1.585)); +#214112 = DIRECTION('',(0.,0.,-1.)); +#214113 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#214114 = ORIENTED_EDGE('',*,*,#214115,.T.); +#214115 = EDGE_CURVE('',#214107,#214116,#214118,.T.); +#214116 = VERTEX_POINT('',#214117); +#214117 = CARTESIAN_POINT('',(179.236837,-70.610944,1.585)); +#214118 = LINE('',#214119,#214120); +#214119 = CARTESIAN_POINT('',(180.251469,-70.612385,1.585)); +#214120 = VECTOR('',#214121,1.); +#214121 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#214122 = ORIENTED_EDGE('',*,*,#214123,.T.); +#214123 = EDGE_CURVE('',#214116,#214124,#214126,.T.); +#214124 = VERTEX_POINT('',#214125); +#214125 = CARTESIAN_POINT('',(179.176469,-70.537385,1.585)); +#214126 = CIRCLE('',#214127,7.500074938986E-02); +#214127 = AXIS2_PLACEMENT_3D('',#214128,#214129,#214130); +#214128 = CARTESIAN_POINT('',(179.25146974938,-70.53738453389,1.585)); +#214129 = DIRECTION('',(0.,0.,-1.)); +#214130 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#214131 = ORIENTED_EDGE('',*,*,#214132,.T.); +#214132 = EDGE_CURVE('',#214124,#214133,#214135,.T.); +#214133 = VERTEX_POINT('',#214134); +#214134 = CARTESIAN_POINT('',(179.179132,-70.136624,1.585)); +#214135 = LINE('',#214136,#214137); +#214136 = CARTESIAN_POINT('',(179.176469,-70.537385,1.585)); +#214137 = VECTOR('',#214138,1.); +#214138 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#214139 = ORIENTED_EDGE('',*,*,#214140,.T.); +#214140 = EDGE_CURVE('',#214133,#214141,#214143,.T.); +#214141 = VERTEX_POINT('',#214142); +#214142 = CARTESIAN_POINT('',(179.427313,-69.892398,1.585)); +#214143 = CIRCLE('',#214144,0.3486213829); +#214144 = AXIS2_PLACEMENT_3D('',#214145,#214146,#214147); +#214145 = CARTESIAN_POINT('',(179.51507322951,-70.22979244383,1.585)); +#214146 = DIRECTION('',(0.,0.,-1.)); +#214147 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#214148 = ORIENTED_EDGE('',*,*,#214149,.T.); +#214149 = EDGE_CURVE('',#214141,#214150,#214152,.T.); +#214150 = VERTEX_POINT('',#214151); +#214151 = CARTESIAN_POINT('',(179.599434,-69.892398,1.585)); +#214152 = LINE('',#214153,#214154); +#214153 = CARTESIAN_POINT('',(179.427313,-69.892398,1.585)); +#214154 = VECTOR('',#214155,1.); +#214155 = DIRECTION('',(1.,0.,0.)); +#214156 = ORIENTED_EDGE('',*,*,#214157,.T.); +#214157 = EDGE_CURVE('',#214150,#214158,#214160,.T.); +#214158 = VERTEX_POINT('',#214159); +#214159 = CARTESIAN_POINT('',(179.848837,-70.141801,1.585)); +#214160 = CIRCLE('',#214161,0.347870264855); +#214161 = AXIS2_PLACEMENT_3D('',#214162,#214163,#214164); +#214162 = CARTESIAN_POINT('',(179.51210626502,-70.22912873497,1.585)); +#214163 = DIRECTION('',(0.,0.,-1.)); +#214164 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#214165 = ORIENTED_EDGE('',*,*,#214166,.T.); +#214166 = EDGE_CURVE('',#214158,#214064,#214167,.T.); +#214167 = LINE('',#214168,#214169); +#214168 = CARTESIAN_POINT('',(179.848837,-70.141801,1.585)); +#214169 = VECTOR('',#214170,1.); +#214170 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#214171 = FACE_BOUND('',#214172,.F.); +#214172 = EDGE_LOOP('',(#214173,#214184,#214192,#214200,#214208,#214216, + #214224)); +#214173 = ORIENTED_EDGE('',*,*,#214174,.T.); +#214174 = EDGE_CURVE('',#214175,#214177,#214179,.T.); +#214175 = VERTEX_POINT('',#214176); +#214176 = CARTESIAN_POINT('',(179.635613,-70.075215,1.585)); +#214177 = VERTEX_POINT('',#214178); +#214178 = CARTESIAN_POINT('',(179.360727,-70.105622,1.585)); +#214179 = CIRCLE('',#214180,0.198386215365); +#214180 = AXIS2_PLACEMENT_3D('',#214181,#214182,#214183); +#214181 = CARTESIAN_POINT('',(179.51380995783,-70.2318071753,1.585)); +#214182 = DIRECTION('',(0.,0.,1.)); +#214183 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#214184 = ORIENTED_EDGE('',*,*,#214185,.T.); +#214185 = EDGE_CURVE('',#214177,#214186,#214188,.T.); +#214186 = VERTEX_POINT('',#214187); +#214187 = CARTESIAN_POINT('',(179.326469,-70.174138,1.585)); +#214188 = LINE('',#214189,#214190); +#214189 = CARTESIAN_POINT('',(179.360727,-70.105622,1.585)); +#214190 = VECTOR('',#214191,1.); +#214191 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#214192 = ORIENTED_EDGE('',*,*,#214193,.T.); +#214193 = EDGE_CURVE('',#214186,#214194,#214196,.T.); +#214194 = VERTEX_POINT('',#214195); +#214195 = CARTESIAN_POINT('',(179.326469,-70.462385,1.585)); +#214196 = LINE('',#214197,#214198); +#214197 = CARTESIAN_POINT('',(179.326469,-70.174138,1.585)); +#214198 = VECTOR('',#214199,1.); +#214199 = DIRECTION('',(0.,-1.,0.)); +#214200 = ORIENTED_EDGE('',*,*,#214201,.T.); +#214201 = EDGE_CURVE('',#214194,#214202,#214204,.T.); +#214202 = VERTEX_POINT('',#214203); +#214203 = CARTESIAN_POINT('',(179.700278,-70.462385,1.585)); +#214204 = LINE('',#214205,#214206); +#214205 = CARTESIAN_POINT('',(179.326469,-70.462385,1.585)); +#214206 = VECTOR('',#214207,1.); +#214207 = DIRECTION('',(1.,0.,0.)); +#214208 = ORIENTED_EDGE('',*,*,#214209,.T.); +#214209 = EDGE_CURVE('',#214202,#214210,#214212,.T.); +#214210 = VERTEX_POINT('',#214211); +#214211 = CARTESIAN_POINT('',(179.700278,-70.174138,1.585)); +#214212 = LINE('',#214213,#214214); +#214213 = CARTESIAN_POINT('',(179.700278,-70.462385,1.585)); +#214214 = VECTOR('',#214215,1.); +#214215 = DIRECTION('',(0.,1.,0.)); +#214216 = ORIENTED_EDGE('',*,*,#214217,.T.); +#214217 = EDGE_CURVE('',#214210,#214218,#214220,.T.); +#214218 = VERTEX_POINT('',#214219); +#214219 = CARTESIAN_POINT('',(179.66602,-70.105622,1.585)); +#214220 = LINE('',#214221,#214222); +#214221 = CARTESIAN_POINT('',(179.700278,-70.174138,1.585)); +#214222 = VECTOR('',#214223,1.); +#214223 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#214224 = ORIENTED_EDGE('',*,*,#214225,.T.); +#214225 = EDGE_CURVE('',#214218,#214175,#214226,.T.); +#214226 = LINE('',#214227,#214228); +#214227 = CARTESIAN_POINT('',(179.66602,-70.105622,1.585)); +#214228 = VECTOR('',#214229,1.); +#214229 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#214230 = PLANE('',#214231); +#214231 = AXIS2_PLACEMENT_3D('',#214232,#214233,#214234); +#214232 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214233 = DIRECTION('',(0.,0.,1.)); +#214234 = DIRECTION('',(1.,0.,-0.)); +#214235 = SHELL_BASED_SURFACE_MODEL('',(#214236)); +#214236 = OPEN_SHELL('',(#214237)); +#214237 = ADVANCED_FACE('',(#214238),#214348,.T.); +#214238 = FACE_BOUND('',#214239,.F.); +#214239 = EDGE_LOOP('',(#214240,#214251,#214259,#214267,#214276,#214284, + #214292,#214301,#214309,#214317,#214326,#214334,#214342)); +#214240 = ORIENTED_EDGE('',*,*,#214241,.T.); +#214241 = EDGE_CURVE('',#214242,#214244,#214246,.T.); +#214242 = VERTEX_POINT('',#214243); +#214243 = CARTESIAN_POINT('',(85.592467,-69.558889,1.585)); +#214244 = VERTEX_POINT('',#214245); +#214245 = CARTESIAN_POINT('',(85.7079,-69.58185,1.585)); +#214246 = CIRCLE('',#214247,6.000007318647E-02); +#214247 = AXIS2_PLACEMENT_3D('',#214248,#214249,#214250); +#214248 = CARTESIAN_POINT('',(85.647899926814,-69.58184982331,1.585)); +#214249 = DIRECTION('',(0.,0.,-1.)); +#214250 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#214251 = ORIENTED_EDGE('',*,*,#214252,.T.); +#214252 = EDGE_CURVE('',#214244,#214253,#214255,.T.); +#214253 = VERTEX_POINT('',#214254); +#214254 = CARTESIAN_POINT('',(85.7079,-69.9156,1.585)); +#214255 = LINE('',#214256,#214257); +#214256 = CARTESIAN_POINT('',(85.7079,-69.58185,1.585)); +#214257 = VECTOR('',#214258,1.); +#214258 = DIRECTION('',(0.,-1.,0.)); +#214259 = ORIENTED_EDGE('',*,*,#214260,.T.); +#214260 = EDGE_CURVE('',#214253,#214261,#214263,.T.); +#214261 = VERTEX_POINT('',#214262); +#214262 = CARTESIAN_POINT('',(86.04165,-69.9156,1.585)); +#214263 = LINE('',#214264,#214265); +#214264 = CARTESIAN_POINT('',(85.7079,-69.9156,1.585)); +#214265 = VECTOR('',#214266,1.); +#214266 = DIRECTION('',(1.,0.,0.)); +#214267 = ORIENTED_EDGE('',*,*,#214268,.T.); +#214268 = EDGE_CURVE('',#214261,#214269,#214271,.T.); +#214269 = VERTEX_POINT('',#214270); +#214270 = CARTESIAN_POINT('',(86.04165,-70.0356,1.585)); +#214271 = CIRCLE('',#214272,6.000000000043E-02); +#214272 = AXIS2_PLACEMENT_3D('',#214273,#214274,#214275); +#214273 = CARTESIAN_POINT('',(86.041650225588,-69.9756,1.585)); +#214274 = DIRECTION('',(0.,0.,-1.)); +#214275 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#214276 = ORIENTED_EDGE('',*,*,#214277,.T.); +#214277 = EDGE_CURVE('',#214269,#214278,#214280,.T.); +#214278 = VERTEX_POINT('',#214279); +#214279 = CARTESIAN_POINT('',(85.7079,-70.0356,1.585)); +#214280 = LINE('',#214281,#214282); +#214281 = CARTESIAN_POINT('',(86.04165,-70.0356,1.585)); +#214282 = VECTOR('',#214283,1.); +#214283 = DIRECTION('',(-1.,0.,0.)); +#214284 = ORIENTED_EDGE('',*,*,#214285,.T.); +#214285 = EDGE_CURVE('',#214278,#214286,#214288,.T.); +#214286 = VERTEX_POINT('',#214287); +#214287 = CARTESIAN_POINT('',(85.7079,-70.36935,1.585)); +#214288 = LINE('',#214289,#214290); +#214289 = CARTESIAN_POINT('',(85.7079,-70.0356,1.585)); +#214290 = VECTOR('',#214291,1.); +#214291 = DIRECTION('',(0.,-1.,0.)); +#214292 = ORIENTED_EDGE('',*,*,#214293,.T.); +#214293 = EDGE_CURVE('',#214286,#214294,#214296,.T.); +#214294 = VERTEX_POINT('',#214295); +#214295 = CARTESIAN_POINT('',(85.5879,-70.36935,1.585)); +#214296 = CIRCLE('',#214297,6.000000000042E-02); +#214297 = AXIS2_PLACEMENT_3D('',#214298,#214299,#214300); +#214298 = CARTESIAN_POINT('',(85.6479,-70.36935022558,1.585)); +#214299 = DIRECTION('',(0.,0.,-1.)); +#214300 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#214301 = ORIENTED_EDGE('',*,*,#214302,.T.); +#214302 = EDGE_CURVE('',#214294,#214303,#214305,.T.); +#214303 = VERTEX_POINT('',#214304); +#214304 = CARTESIAN_POINT('',(85.5879,-70.0356,1.585)); +#214305 = LINE('',#214306,#214307); +#214306 = CARTESIAN_POINT('',(85.5879,-70.36935,1.585)); +#214307 = VECTOR('',#214308,1.); +#214308 = DIRECTION('',(0.,1.,0.)); +#214309 = ORIENTED_EDGE('',*,*,#214310,.T.); +#214310 = EDGE_CURVE('',#214303,#214311,#214313,.T.); +#214311 = VERTEX_POINT('',#214312); +#214312 = CARTESIAN_POINT('',(85.25415,-70.0356,1.585)); +#214313 = LINE('',#214314,#214315); +#214314 = CARTESIAN_POINT('',(85.5879,-70.0356,1.585)); +#214315 = VECTOR('',#214316,1.); +#214316 = DIRECTION('',(-1.,0.,0.)); +#214317 = ORIENTED_EDGE('',*,*,#214318,.T.); +#214318 = EDGE_CURVE('',#214311,#214319,#214321,.T.); +#214319 = VERTEX_POINT('',#214320); +#214320 = CARTESIAN_POINT('',(85.25415,-69.9156,1.585)); +#214321 = CIRCLE('',#214322,6.000000000043E-02); +#214322 = AXIS2_PLACEMENT_3D('',#214323,#214324,#214325); +#214323 = CARTESIAN_POINT('',(85.254149774412,-69.9756,1.585)); +#214324 = DIRECTION('',(0.,0.,-1.)); +#214325 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#214326 = ORIENTED_EDGE('',*,*,#214327,.T.); +#214327 = EDGE_CURVE('',#214319,#214328,#214330,.T.); +#214328 = VERTEX_POINT('',#214329); +#214329 = CARTESIAN_POINT('',(85.5879,-69.9156,1.585)); +#214330 = LINE('',#214331,#214332); +#214331 = CARTESIAN_POINT('',(85.25415,-69.9156,1.585)); +#214332 = VECTOR('',#214333,1.); +#214333 = DIRECTION('',(1.,0.,0.)); +#214334 = ORIENTED_EDGE('',*,*,#214335,.T.); +#214335 = EDGE_CURVE('',#214328,#214336,#214338,.T.); +#214336 = VERTEX_POINT('',#214337); +#214337 = CARTESIAN_POINT('',(85.5879,-69.58185,1.585)); +#214338 = LINE('',#214339,#214340); +#214339 = CARTESIAN_POINT('',(85.5879,-69.9156,1.585)); +#214340 = VECTOR('',#214341,1.); +#214341 = DIRECTION('',(0.,1.,0.)); +#214342 = ORIENTED_EDGE('',*,*,#214343,.T.); +#214343 = EDGE_CURVE('',#214336,#214242,#214344,.T.); +#214344 = LINE('',#214345,#214346); +#214345 = CARTESIAN_POINT('',(85.5879,-69.58185,1.585)); +#214346 = VECTOR('',#214347,1.); +#214347 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#214348 = PLANE('',#214349); +#214349 = AXIS2_PLACEMENT_3D('',#214350,#214351,#214352); +#214350 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214351 = DIRECTION('',(0.,0.,1.)); +#214352 = DIRECTION('',(1.,0.,-0.)); +#214353 = SHELL_BASED_SURFACE_MODEL('',(#214354)); +#214354 = OPEN_SHELL('',(#214355)); +#214355 = ADVANCED_FACE('',(#214356,#214441),#214500,.T.); +#214356 = FACE_BOUND('',#214357,.F.); +#214357 = EDGE_LOOP('',(#214358,#214369,#214377,#214385,#214393,#214402, + #214410,#214419,#214427,#214435)); +#214358 = ORIENTED_EDGE('',*,*,#214359,.T.); +#214359 = EDGE_CURVE('',#214360,#214362,#214364,.T.); +#214360 = VERTEX_POINT('',#214361); +#214361 = CARTESIAN_POINT('',(206.126866,-69.724267,1.585)); +#214362 = VERTEX_POINT('',#214363); +#214363 = CARTESIAN_POINT('',(206.610776,-69.795163,1.585)); +#214364 = CIRCLE('',#214365,0.34461174713); +#214365 = AXIS2_PLACEMENT_3D('',#214366,#214367,#214368); +#214366 = CARTESIAN_POINT('',(206.33362294377,-69.99996397579,1.585)); +#214367 = DIRECTION('',(0.,0.,-1.)); +#214368 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#214369 = ORIENTED_EDGE('',*,*,#214370,.T.); +#214370 = EDGE_CURVE('',#214362,#214371,#214373,.T.); +#214371 = VERTEX_POINT('',#214372); +#214372 = CARTESIAN_POINT('',(206.668837,-69.91561,1.585)); +#214373 = LINE('',#214374,#214375); +#214374 = CARTESIAN_POINT('',(206.610776,-69.795163,1.585)); +#214375 = VECTOR('',#214376,1.); +#214376 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#214377 = ORIENTED_EDGE('',*,*,#214378,.T.); +#214378 = EDGE_CURVE('',#214371,#214379,#214381,.T.); +#214379 = VERTEX_POINT('',#214380); +#214380 = CARTESIAN_POINT('',(206.670278,-70.236194,1.585)); +#214381 = LINE('',#214382,#214383); +#214382 = CARTESIAN_POINT('',(206.668837,-69.91561,1.585)); +#214383 = VECTOR('',#214384,1.); +#214384 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#214385 = ORIENTED_EDGE('',*,*,#214386,.T.); +#214386 = EDGE_CURVE('',#214379,#214387,#214389,.T.); +#214387 = VERTEX_POINT('',#214388); +#214388 = CARTESIAN_POINT('',(207.086101,-70.237635,1.585)); +#214389 = LINE('',#214390,#214391); +#214390 = CARTESIAN_POINT('',(206.670278,-70.236194,1.585)); +#214391 = VECTOR('',#214392,1.); +#214392 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#214393 = ORIENTED_EDGE('',*,*,#214394,.T.); +#214394 = EDGE_CURVE('',#214387,#214395,#214397,.T.); +#214395 = VERTEX_POINT('',#214396); +#214396 = CARTESIAN_POINT('',(207.071469,-70.386194,1.585)); +#214397 = CIRCLE('',#214398,7.500006711464E-02); +#214398 = AXIS2_PLACEMENT_3D('',#214399,#214400,#214401); +#214399 = CARTESIAN_POINT('',(207.07146906711,-70.31119393288,1.585)); +#214400 = DIRECTION('',(0.,0.,-1.)); +#214401 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#214402 = ORIENTED_EDGE('',*,*,#214403,.T.); +#214403 = EDGE_CURVE('',#214395,#214404,#214406,.T.); +#214404 = VERTEX_POINT('',#214405); +#214405 = CARTESIAN_POINT('',(206.056837,-70.384753,1.585)); +#214406 = LINE('',#214407,#214408); +#214407 = CARTESIAN_POINT('',(207.071469,-70.386194,1.585)); +#214408 = VECTOR('',#214409,1.); +#214409 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#214410 = ORIENTED_EDGE('',*,*,#214411,.T.); +#214411 = EDGE_CURVE('',#214404,#214412,#214414,.T.); +#214412 = VERTEX_POINT('',#214413); +#214413 = CARTESIAN_POINT('',(205.996469,-70.311194,1.585)); +#214414 = CIRCLE('',#214415,7.500074938986E-02); +#214415 = AXIS2_PLACEMENT_3D('',#214416,#214417,#214418); +#214416 = CARTESIAN_POINT('',(206.07146974938,-70.31119353389,1.585)); +#214417 = DIRECTION('',(0.,0.,-1.)); +#214418 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#214419 = ORIENTED_EDGE('',*,*,#214420,.T.); +#214420 = EDGE_CURVE('',#214412,#214421,#214423,.T.); +#214421 = VERTEX_POINT('',#214422); +#214422 = CARTESIAN_POINT('',(205.999132,-69.910433,1.585)); +#214423 = LINE('',#214424,#214425); +#214424 = CARTESIAN_POINT('',(205.996469,-70.311194,1.585)); +#214425 = VECTOR('',#214426,1.); +#214426 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#214427 = ORIENTED_EDGE('',*,*,#214428,.T.); +#214428 = EDGE_CURVE('',#214421,#214429,#214431,.T.); +#214429 = VERTEX_POINT('',#214430); +#214430 = CARTESIAN_POINT('',(206.061336,-69.78772,1.585)); +#214431 = LINE('',#214432,#214433); +#214432 = CARTESIAN_POINT('',(205.999132,-69.910433,1.585)); +#214433 = VECTOR('',#214434,1.); +#214434 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#214435 = ORIENTED_EDGE('',*,*,#214436,.T.); +#214436 = EDGE_CURVE('',#214429,#214360,#214437,.T.); +#214437 = LINE('',#214438,#214439); +#214438 = CARTESIAN_POINT('',(206.061336,-69.78772,1.585)); +#214439 = VECTOR('',#214440,1.); +#214440 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#214441 = FACE_BOUND('',#214442,.F.); +#214442 = EDGE_LOOP('',(#214443,#214454,#214462,#214470,#214478,#214486, + #214494)); +#214443 = ORIENTED_EDGE('',*,*,#214444,.T.); +#214444 = EDGE_CURVE('',#214445,#214447,#214449,.T.); +#214445 = VERTEX_POINT('',#214446); +#214446 = CARTESIAN_POINT('',(206.455613,-69.849024,1.585)); +#214447 = VERTEX_POINT('',#214448); +#214448 = CARTESIAN_POINT('',(206.180727,-69.879431,1.585)); +#214449 = CIRCLE('',#214450,0.198386215365); +#214450 = AXIS2_PLACEMENT_3D('',#214451,#214452,#214453); +#214451 = CARTESIAN_POINT('',(206.33380995783,-70.0056161753,1.585)); +#214452 = DIRECTION('',(0.,0.,1.)); +#214453 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#214454 = ORIENTED_EDGE('',*,*,#214455,.T.); +#214455 = EDGE_CURVE('',#214447,#214456,#214458,.T.); +#214456 = VERTEX_POINT('',#214457); +#214457 = CARTESIAN_POINT('',(206.146469,-69.947947,1.585)); +#214458 = LINE('',#214459,#214460); +#214459 = CARTESIAN_POINT('',(206.180727,-69.879431,1.585)); +#214460 = VECTOR('',#214461,1.); +#214461 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#214462 = ORIENTED_EDGE('',*,*,#214463,.T.); +#214463 = EDGE_CURVE('',#214456,#214464,#214466,.T.); +#214464 = VERTEX_POINT('',#214465); +#214465 = CARTESIAN_POINT('',(206.146469,-70.236194,1.585)); +#214466 = LINE('',#214467,#214468); +#214467 = CARTESIAN_POINT('',(206.146469,-69.947947,1.585)); +#214468 = VECTOR('',#214469,1.); +#214469 = DIRECTION('',(0.,-1.,0.)); +#214470 = ORIENTED_EDGE('',*,*,#214471,.T.); +#214471 = EDGE_CURVE('',#214464,#214472,#214474,.T.); +#214472 = VERTEX_POINT('',#214473); +#214473 = CARTESIAN_POINT('',(206.520278,-70.236194,1.585)); +#214474 = LINE('',#214475,#214476); +#214475 = CARTESIAN_POINT('',(206.146469,-70.236194,1.585)); +#214476 = VECTOR('',#214477,1.); +#214477 = DIRECTION('',(1.,0.,0.)); +#214478 = ORIENTED_EDGE('',*,*,#214479,.T.); +#214479 = EDGE_CURVE('',#214472,#214480,#214482,.T.); +#214480 = VERTEX_POINT('',#214481); +#214481 = CARTESIAN_POINT('',(206.520278,-69.947947,1.585)); +#214482 = LINE('',#214483,#214484); +#214483 = CARTESIAN_POINT('',(206.520278,-70.236194,1.585)); +#214484 = VECTOR('',#214485,1.); +#214485 = DIRECTION('',(0.,1.,0.)); +#214486 = ORIENTED_EDGE('',*,*,#214487,.T.); +#214487 = EDGE_CURVE('',#214480,#214488,#214490,.T.); +#214488 = VERTEX_POINT('',#214489); +#214489 = CARTESIAN_POINT('',(206.48602,-69.879431,1.585)); +#214490 = LINE('',#214491,#214492); +#214491 = CARTESIAN_POINT('',(206.520278,-69.947947,1.585)); +#214492 = VECTOR('',#214493,1.); +#214493 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#214494 = ORIENTED_EDGE('',*,*,#214495,.T.); +#214495 = EDGE_CURVE('',#214488,#214445,#214496,.T.); +#214496 = LINE('',#214497,#214498); +#214497 = CARTESIAN_POINT('',(206.48602,-69.879431,1.585)); +#214498 = VECTOR('',#214499,1.); +#214499 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#214500 = PLANE('',#214501); +#214501 = AXIS2_PLACEMENT_3D('',#214502,#214503,#214504); +#214502 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214503 = DIRECTION('',(0.,0.,1.)); +#214504 = DIRECTION('',(1.,0.,-0.)); +#214505 = SHELL_BASED_SURFACE_MODEL('',(#214506)); +#214506 = OPEN_SHELL('',(#214507)); +#214507 = ADVANCED_FACE('',(#214508),#214578,.T.); +#214508 = FACE_BOUND('',#214509,.F.); +#214509 = EDGE_LOOP('',(#214510,#214521,#214529,#214538,#214546,#214555, + #214563,#214572)); +#214510 = ORIENTED_EDGE('',*,*,#214511,.T.); +#214511 = EDGE_CURVE('',#214512,#214514,#214516,.T.); +#214512 = VERTEX_POINT('',#214513); +#214513 = CARTESIAN_POINT('',(101.372601,-70.145559,1.585)); +#214514 = VERTEX_POINT('',#214515); +#214515 = CARTESIAN_POINT('',(101.455937,-70.145559,1.585)); +#214516 = CIRCLE('',#214517,7.499882881843E-02); +#214517 = AXIS2_PLACEMENT_3D('',#214518,#214519,#214520); +#214518 = CARTESIAN_POINT('',(101.414269,-70.20791765697,1.585)); +#214519 = DIRECTION('',(0.,0.,-1.)); +#214520 = DIRECTION('',(-0.555582009165,0.831461743613,0.)); +#214521 = ORIENTED_EDGE('',*,*,#214522,.T.); +#214522 = EDGE_CURVE('',#214514,#214523,#214525,.T.); +#214523 = VERTEX_POINT('',#214524); +#214524 = CARTESIAN_POINT('',(101.524248,-70.21387,1.585)); +#214525 = LINE('',#214526,#214527); +#214526 = CARTESIAN_POINT('',(101.455937,-70.145559,1.585)); +#214527 = VECTOR('',#214528,1.); +#214528 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#214529 = ORIENTED_EDGE('',*,*,#214530,.T.); +#214530 = EDGE_CURVE('',#214523,#214531,#214533,.T.); +#214531 = VERTEX_POINT('',#214532); +#214532 = CARTESIAN_POINT('',(101.514921,-70.308571,1.585)); +#214533 = CIRCLE('',#214534,7.499999203861E-02); +#214534 = AXIS2_PLACEMENT_3D('',#214535,#214536,#214537); +#214535 = CARTESIAN_POINT('',(101.46188796407,-70.25553803,1.585)); +#214536 = DIRECTION('',(0.,0.,-1.)); +#214537 = DIRECTION('',(0.831467233969,0.555573792431,0.)); +#214538 = ORIENTED_EDGE('',*,*,#214539,.T.); +#214539 = EDGE_CURVE('',#214531,#214540,#214542,.T.); +#214540 = VERTEX_POINT('',#214541); +#214541 = CARTESIAN_POINT('',(101.455937,-70.365517,1.585)); +#214542 = LINE('',#214543,#214544); +#214543 = CARTESIAN_POINT('',(101.514921,-70.308571,1.585)); +#214544 = VECTOR('',#214545,1.); +#214545 = DIRECTION('',(-0.71942625942,-0.694568828308,0.)); +#214546 = ORIENTED_EDGE('',*,*,#214547,.T.); +#214547 = EDGE_CURVE('',#214540,#214548,#214550,.T.); +#214548 = VERTEX_POINT('',#214549); +#214549 = CARTESIAN_POINT('',(101.361236,-70.35619,1.585)); +#214550 = CIRCLE('',#214551,7.499999203859E-02); +#214551 = AXIS2_PLACEMENT_3D('',#214552,#214553,#214554); +#214552 = CARTESIAN_POINT('',(101.41426896999,-70.30315696407,1.585)); +#214553 = DIRECTION('',(-0.,0.,-1.)); +#214554 = DIRECTION('',(0.555573792431,-0.831467233969,-0.)); +#214555 = ORIENTED_EDGE('',*,*,#214556,.T.); +#214556 = EDGE_CURVE('',#214548,#214557,#214559,.T.); +#214557 = VERTEX_POINT('',#214558); +#214558 = CARTESIAN_POINT('',(101.30429,-70.297206,1.585)); +#214559 = LINE('',#214560,#214561); +#214560 = CARTESIAN_POINT('',(101.361236,-70.35619,1.585)); +#214561 = VECTOR('',#214562,1.); +#214562 = DIRECTION('',(-0.694568828308,0.71942625942,0.)); +#214563 = ORIENTED_EDGE('',*,*,#214564,.T.); +#214564 = EDGE_CURVE('',#214557,#214565,#214567,.T.); +#214565 = VERTEX_POINT('',#214566); +#214566 = CARTESIAN_POINT('',(101.313617,-70.202505,1.585)); +#214567 = CIRCLE('',#214568,7.499999203867E-02); +#214568 = AXIS2_PLACEMENT_3D('',#214569,#214570,#214571); +#214569 = CARTESIAN_POINT('',(101.36665003592,-70.25553796999,1.585)); +#214570 = DIRECTION('',(0.,0.,-1.)); +#214571 = DIRECTION('',(-0.831467233969,-0.55557379243,-0.)); +#214572 = ORIENTED_EDGE('',*,*,#214573,.T.); +#214573 = EDGE_CURVE('',#214565,#214512,#214574,.T.); +#214574 = LINE('',#214575,#214576); +#214575 = CARTESIAN_POINT('',(101.313617,-70.202505,1.585)); +#214576 = VECTOR('',#214577,1.); +#214577 = DIRECTION('',(0.71942625942,0.694568828308,0.)); +#214578 = PLANE('',#214579); +#214579 = AXIS2_PLACEMENT_3D('',#214580,#214581,#214582); +#214580 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214581 = DIRECTION('',(0.,0.,1.)); +#214582 = DIRECTION('',(1.,0.,-0.)); +#214583 = SHELL_BASED_SURFACE_MODEL('',(#214584)); +#214584 = OPEN_SHELL('',(#214585)); +#214585 = ADVANCED_FACE('',(#214586),#214622,.T.); +#214586 = FACE_BOUND('',#214587,.F.); +#214587 = EDGE_LOOP('',(#214588,#214599,#214607,#214616)); +#214588 = ORIENTED_EDGE('',*,*,#214589,.T.); +#214589 = EDGE_CURVE('',#214590,#214592,#214594,.T.); +#214590 = VERTEX_POINT('',#214591); +#214591 = CARTESIAN_POINT('',(101.129392,-69.9056,1.585)); +#214592 = VERTEX_POINT('',#214593); +#214593 = CARTESIAN_POINT('',(101.129392,-69.7856,1.585)); +#214594 = CIRCLE('',#214595,6.000000000043E-02); +#214595 = AXIS2_PLACEMENT_3D('',#214596,#214597,#214598); +#214596 = CARTESIAN_POINT('',(101.12939177441,-69.8456,1.585)); +#214597 = DIRECTION('',(0.,0.,-1.)); +#214598 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#214599 = ORIENTED_EDGE('',*,*,#214600,.T.); +#214600 = EDGE_CURVE('',#214592,#214601,#214603,.T.); +#214601 = VERTEX_POINT('',#214602); +#214602 = CARTESIAN_POINT('',(101.603908,-69.7856,1.585)); +#214603 = LINE('',#214604,#214605); +#214604 = CARTESIAN_POINT('',(101.129392,-69.7856,1.585)); +#214605 = VECTOR('',#214606,1.); +#214606 = DIRECTION('',(1.,0.,0.)); +#214607 = ORIENTED_EDGE('',*,*,#214608,.T.); +#214608 = EDGE_CURVE('',#214601,#214609,#214611,.T.); +#214609 = VERTEX_POINT('',#214610); +#214610 = CARTESIAN_POINT('',(101.603908,-69.9056,1.585)); +#214611 = CIRCLE('',#214612,6.000000000043E-02); +#214612 = AXIS2_PLACEMENT_3D('',#214613,#214614,#214615); +#214613 = CARTESIAN_POINT('',(101.60390822558,-69.8456,1.585)); +#214614 = DIRECTION('',(0.,0.,-1.)); +#214615 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#214616 = ORIENTED_EDGE('',*,*,#214617,.T.); +#214617 = EDGE_CURVE('',#214609,#214590,#214618,.T.); +#214618 = LINE('',#214619,#214620); +#214619 = CARTESIAN_POINT('',(101.603908,-69.9056,1.585)); +#214620 = VECTOR('',#214621,1.); +#214621 = DIRECTION('',(-1.,0.,0.)); +#214622 = PLANE('',#214623); +#214623 = AXIS2_PLACEMENT_3D('',#214624,#214625,#214626); +#214624 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214625 = DIRECTION('',(0.,0.,1.)); +#214626 = DIRECTION('',(1.,0.,-0.)); +#214627 = SHELL_BASED_SURFACE_MODEL('',(#214628)); +#214628 = OPEN_SHELL('',(#214629)); +#214629 = ADVANCED_FACE('',(#214630),#214773,.T.); +#214630 = FACE_BOUND('',#214631,.F.); +#214631 = EDGE_LOOP('',(#214632,#214643,#214651,#214659,#214668,#214676, + #214684,#214693,#214701,#214710,#214718,#214726,#214734,#214743, + #214751,#214759,#214767)); +#214632 = ORIENTED_EDGE('',*,*,#214633,.T.); +#214633 = EDGE_CURVE('',#214634,#214636,#214638,.T.); +#214634 = VERTEX_POINT('',#214635); +#214635 = CARTESIAN_POINT('',(179.876467,-68.903597,1.585)); +#214636 = VERTEX_POINT('',#214637); +#214637 = CARTESIAN_POINT('',(179.993135,-68.965957,1.585)); +#214638 = CIRCLE('',#214639,7.500000000002E-02); +#214639 = AXIS2_PLACEMENT_3D('',#214640,#214641,#214642); +#214640 = CARTESIAN_POINT('',(179.918135,-68.96595706555,1.585)); +#214641 = DIRECTION('',(0.,0.,-1.)); +#214642 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#214643 = ORIENTED_EDGE('',*,*,#214644,.T.); +#214644 = EDGE_CURVE('',#214636,#214645,#214647,.T.); +#214645 = VERTEX_POINT('',#214646); +#214646 = CARTESIAN_POINT('',(179.993135,-69.033814,1.585)); +#214647 = LINE('',#214648,#214649); +#214648 = CARTESIAN_POINT('',(179.993135,-68.965957,1.585)); +#214649 = VECTOR('',#214650,1.); +#214650 = DIRECTION('',(0.,-1.,0.)); +#214651 = ORIENTED_EDGE('',*,*,#214652,.T.); +#214652 = EDGE_CURVE('',#214645,#214653,#214655,.T.); +#214653 = VERTEX_POINT('',#214654); +#214654 = CARTESIAN_POINT('',(180.266101,-69.035255,1.585)); +#214655 = LINE('',#214656,#214657); +#214656 = CARTESIAN_POINT('',(179.993135,-69.033814,1.585)); +#214657 = VECTOR('',#214658,1.); +#214658 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#214659 = ORIENTED_EDGE('',*,*,#214660,.T.); +#214660 = EDGE_CURVE('',#214653,#214661,#214663,.T.); +#214661 = VERTEX_POINT('',#214662); +#214662 = CARTESIAN_POINT('',(180.251469,-69.183814,1.585)); +#214663 = CIRCLE('',#214664,7.500006711462E-02); +#214664 = AXIS2_PLACEMENT_3D('',#214665,#214666,#214667); +#214665 = CARTESIAN_POINT('',(180.25146906711,-69.10881393288,1.585)); +#214666 = DIRECTION('',(0.,0.,-1.)); +#214667 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#214668 = ORIENTED_EDGE('',*,*,#214669,.T.); +#214669 = EDGE_CURVE('',#214661,#214670,#214672,.T.); +#214670 = VERTEX_POINT('',#214671); +#214671 = CARTESIAN_POINT('',(179.993135,-69.183814,1.585)); +#214672 = LINE('',#214673,#214674); +#214673 = CARTESIAN_POINT('',(180.251469,-69.183814,1.585)); +#214674 = VECTOR('',#214675,1.); +#214675 = DIRECTION('',(-1.,0.,0.)); +#214676 = ORIENTED_EDGE('',*,*,#214677,.T.); +#214677 = EDGE_CURVE('',#214670,#214678,#214680,.T.); +#214678 = VERTEX_POINT('',#214679); +#214679 = CARTESIAN_POINT('',(179.991694,-69.599636,1.585)); +#214680 = LINE('',#214681,#214682); +#214681 = CARTESIAN_POINT('',(179.993135,-69.183814,1.585)); +#214682 = VECTOR('',#214683,1.); +#214683 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#214684 = ORIENTED_EDGE('',*,*,#214685,.T.); +#214685 = EDGE_CURVE('',#214678,#214686,#214688,.T.); +#214686 = VERTEX_POINT('',#214687); +#214687 = CARTESIAN_POINT('',(179.894417,-69.656155,1.585)); +#214688 = CIRCLE('',#214689,7.500041328202E-02); +#214689 = AXIS2_PLACEMENT_3D('',#214690,#214691,#214692); +#214690 = CARTESIAN_POINT('',(179.91813481481,-69.58500356113,1.585)); +#214691 = DIRECTION('',(0.,0.,-1.)); +#214692 = DIRECTION('',(0.980783731279,-0.195098109828,0.)); +#214693 = ORIENTED_EDGE('',*,*,#214694,.T.); +#214694 = EDGE_CURVE('',#214686,#214695,#214697,.T.); +#214695 = VERTEX_POINT('',#214696); +#214696 = CARTESIAN_POINT('',(179.166707,-69.412066,1.585)); +#214697 = LINE('',#214698,#214699); +#214698 = CARTESIAN_POINT('',(179.894417,-69.656155,1.585)); +#214699 = VECTOR('',#214700,1.); +#214700 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#214701 = ORIENTED_EDGE('',*,*,#214702,.T.); +#214702 = EDGE_CURVE('',#214695,#214703,#214705,.T.); +#214703 = VERTEX_POINT('',#214704); +#214704 = CARTESIAN_POINT('',(179.227567,-69.275758,1.585)); +#214705 = CIRCLE('',#214706,7.50000151955E-02); +#214706 = AXIS2_PLACEMENT_3D('',#214707,#214708,#214709); +#214707 = CARTESIAN_POINT('',(179.20385009996,-69.34690932417,1.585)); +#214708 = DIRECTION('',(0.,0.,-1.)); +#214709 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#214710 = ORIENTED_EDGE('',*,*,#214711,.T.); +#214711 = EDGE_CURVE('',#214703,#214712,#214714,.T.); +#214712 = VERTEX_POINT('',#214713); +#214713 = CARTESIAN_POINT('',(179.843135,-69.480947,1.585)); +#214714 = LINE('',#214715,#214716); +#214715 = CARTESIAN_POINT('',(179.227567,-69.275758,1.585)); +#214716 = VECTOR('',#214717,1.); +#214717 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#214718 = ORIENTED_EDGE('',*,*,#214719,.T.); +#214719 = EDGE_CURVE('',#214712,#214720,#214722,.T.); +#214720 = VERTEX_POINT('',#214721); +#214721 = CARTESIAN_POINT('',(179.843135,-69.183814,1.585)); +#214722 = LINE('',#214723,#214724); +#214723 = CARTESIAN_POINT('',(179.843135,-69.480947,1.585)); +#214724 = VECTOR('',#214725,1.); +#214725 = DIRECTION('',(0.,1.,0.)); +#214726 = ORIENTED_EDGE('',*,*,#214727,.T.); +#214727 = EDGE_CURVE('',#214720,#214728,#214730,.T.); +#214728 = VERTEX_POINT('',#214729); +#214729 = CARTESIAN_POINT('',(179.57017,-69.182373,1.585)); +#214730 = LINE('',#214731,#214732); +#214731 = CARTESIAN_POINT('',(179.843135,-69.183814,1.585)); +#214732 = VECTOR('',#214733,1.); +#214733 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#214734 = ORIENTED_EDGE('',*,*,#214735,.T.); +#214735 = EDGE_CURVE('',#214728,#214736,#214738,.T.); +#214736 = VERTEX_POINT('',#214737); +#214737 = CARTESIAN_POINT('',(179.584802,-69.033814,1.585)); +#214738 = CIRCLE('',#214739,7.500006711464E-02); +#214739 = AXIS2_PLACEMENT_3D('',#214740,#214741,#214742); +#214740 = CARTESIAN_POINT('',(179.58480193288,-69.10881406711,1.585)); +#214741 = DIRECTION('',(0.,0.,-1.)); +#214742 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#214743 = ORIENTED_EDGE('',*,*,#214744,.T.); +#214744 = EDGE_CURVE('',#214736,#214745,#214747,.T.); +#214745 = VERTEX_POINT('',#214746); +#214746 = CARTESIAN_POINT('',(179.843135,-69.033814,1.585)); +#214747 = LINE('',#214748,#214749); +#214748 = CARTESIAN_POINT('',(179.584802,-69.033814,1.585)); +#214749 = VECTOR('',#214750,1.); +#214750 = DIRECTION('',(1.,0.,0.)); +#214751 = ORIENTED_EDGE('',*,*,#214752,.T.); +#214752 = EDGE_CURVE('',#214745,#214753,#214755,.T.); +#214753 = VERTEX_POINT('',#214754); +#214754 = CARTESIAN_POINT('',(179.844576,-68.951325,1.585)); +#214755 = LINE('',#214756,#214757); +#214756 = CARTESIAN_POINT('',(179.843135,-69.033814,1.585)); +#214757 = VECTOR('',#214758,1.); +#214758 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#214759 = ORIENTED_EDGE('',*,*,#214760,.T.); +#214760 = EDGE_CURVE('',#214753,#214761,#214763,.T.); +#214761 = VERTEX_POINT('',#214762); +#214762 = CARTESIAN_POINT('',(179.855775,-68.924289,1.585)); +#214763 = LINE('',#214764,#214765); +#214764 = CARTESIAN_POINT('',(179.844576,-68.951325,1.585)); +#214765 = VECTOR('',#214766,1.); +#214766 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#214767 = ORIENTED_EDGE('',*,*,#214768,.T.); +#214768 = EDGE_CURVE('',#214761,#214634,#214769,.T.); +#214769 = LINE('',#214770,#214771); +#214770 = CARTESIAN_POINT('',(179.855775,-68.924289,1.585)); +#214771 = VECTOR('',#214772,1.); +#214772 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#214773 = PLANE('',#214774); +#214774 = AXIS2_PLACEMENT_3D('',#214775,#214776,#214777); +#214775 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214776 = DIRECTION('',(0.,0.,1.)); +#214777 = DIRECTION('',(1.,0.,-0.)); +#214778 = SHELL_BASED_SURFACE_MODEL('',(#214779)); +#214779 = OPEN_SHELL('',(#214780)); +#214780 = ADVANCED_FACE('',(#214781),#214825,.T.); +#214781 = FACE_BOUND('',#214782,.F.); +#214782 = EDGE_LOOP('',(#214783,#214794,#214802,#214811,#214819)); +#214783 = ORIENTED_EDGE('',*,*,#214784,.T.); +#214784 = EDGE_CURVE('',#214785,#214787,#214789,.T.); +#214785 = VERTEX_POINT('',#214786); +#214786 = CARTESIAN_POINT('',(177.788717,-69.062881,1.585)); +#214787 = VERTEX_POINT('',#214788); +#214788 = CARTESIAN_POINT('',(177.90415,-69.085842,1.585)); +#214789 = CIRCLE('',#214790,6.000007318647E-02); +#214790 = AXIS2_PLACEMENT_3D('',#214791,#214792,#214793); +#214791 = CARTESIAN_POINT('',(177.84414992681,-69.08584182331,1.585)); +#214792 = DIRECTION('',(0.,0.,-1.)); +#214793 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#214794 = ORIENTED_EDGE('',*,*,#214795,.T.); +#214795 = EDGE_CURVE('',#214787,#214796,#214798,.T.); +#214796 = VERTEX_POINT('',#214797); +#214797 = CARTESIAN_POINT('',(177.90415,-69.560358,1.585)); +#214798 = LINE('',#214799,#214800); +#214799 = CARTESIAN_POINT('',(177.90415,-69.085842,1.585)); +#214800 = VECTOR('',#214801,1.); +#214801 = DIRECTION('',(0.,-1.,0.)); +#214802 = ORIENTED_EDGE('',*,*,#214803,.T.); +#214803 = EDGE_CURVE('',#214796,#214804,#214806,.T.); +#214804 = VERTEX_POINT('',#214805); +#214805 = CARTESIAN_POINT('',(177.78415,-69.560358,1.585)); +#214806 = CIRCLE('',#214807,6.000000000041E-02); +#214807 = AXIS2_PLACEMENT_3D('',#214808,#214809,#214810); +#214808 = CARTESIAN_POINT('',(177.84415,-69.56035822558,1.585)); +#214809 = DIRECTION('',(0.,0.,-1.)); +#214810 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#214811 = ORIENTED_EDGE('',*,*,#214812,.T.); +#214812 = EDGE_CURVE('',#214804,#214813,#214815,.T.); +#214813 = VERTEX_POINT('',#214814); +#214814 = CARTESIAN_POINT('',(177.78415,-69.085842,1.585)); +#214815 = LINE('',#214816,#214817); +#214816 = CARTESIAN_POINT('',(177.78415,-69.560358,1.585)); +#214817 = VECTOR('',#214818,1.); +#214818 = DIRECTION('',(0.,1.,0.)); +#214819 = ORIENTED_EDGE('',*,*,#214820,.T.); +#214820 = EDGE_CURVE('',#214813,#214785,#214821,.T.); +#214821 = LINE('',#214822,#214823); +#214822 = CARTESIAN_POINT('',(177.78415,-69.085842,1.585)); +#214823 = VECTOR('',#214824,1.); +#214824 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#214825 = PLANE('',#214826); +#214826 = AXIS2_PLACEMENT_3D('',#214827,#214828,#214829); +#214827 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214828 = DIRECTION('',(0.,0.,1.)); +#214829 = DIRECTION('',(1.,0.,-0.)); +#214830 = SHELL_BASED_SURFACE_MODEL('',(#214831)); +#214831 = OPEN_SHELL('',(#214832)); +#214832 = ADVANCED_FACE('',(#214833),#214877,.T.); +#214833 = FACE_BOUND('',#214834,.F.); +#214834 = EDGE_LOOP('',(#214835,#214846,#214854,#214863,#214871)); +#214835 = ORIENTED_EDGE('',*,*,#214836,.T.); +#214836 = EDGE_CURVE('',#214837,#214839,#214841,.T.); +#214837 = VERTEX_POINT('',#214838); +#214838 = CARTESIAN_POINT('',(178.833717,-69.062881,1.585)); +#214839 = VERTEX_POINT('',#214840); +#214840 = CARTESIAN_POINT('',(178.94915,-69.085842,1.585)); +#214841 = CIRCLE('',#214842,6.000007318647E-02); +#214842 = AXIS2_PLACEMENT_3D('',#214843,#214844,#214845); +#214843 = CARTESIAN_POINT('',(178.88914992681,-69.08584182331,1.585)); +#214844 = DIRECTION('',(0.,0.,-1.)); +#214845 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#214846 = ORIENTED_EDGE('',*,*,#214847,.T.); +#214847 = EDGE_CURVE('',#214839,#214848,#214850,.T.); +#214848 = VERTEX_POINT('',#214849); +#214849 = CARTESIAN_POINT('',(178.94915,-69.560358,1.585)); +#214850 = LINE('',#214851,#214852); +#214851 = CARTESIAN_POINT('',(178.94915,-69.085842,1.585)); +#214852 = VECTOR('',#214853,1.); +#214853 = DIRECTION('',(0.,-1.,0.)); +#214854 = ORIENTED_EDGE('',*,*,#214855,.T.); +#214855 = EDGE_CURVE('',#214848,#214856,#214858,.T.); +#214856 = VERTEX_POINT('',#214857); +#214857 = CARTESIAN_POINT('',(178.82915,-69.560358,1.585)); +#214858 = CIRCLE('',#214859,6.000000000042E-02); +#214859 = AXIS2_PLACEMENT_3D('',#214860,#214861,#214862); +#214860 = CARTESIAN_POINT('',(178.88915,-69.56035822558,1.585)); +#214861 = DIRECTION('',(0.,0.,-1.)); +#214862 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#214863 = ORIENTED_EDGE('',*,*,#214864,.T.); +#214864 = EDGE_CURVE('',#214856,#214865,#214867,.T.); +#214865 = VERTEX_POINT('',#214866); +#214866 = CARTESIAN_POINT('',(178.82915,-69.085842,1.585)); +#214867 = LINE('',#214868,#214869); +#214868 = CARTESIAN_POINT('',(178.82915,-69.560358,1.585)); +#214869 = VECTOR('',#214870,1.); +#214870 = DIRECTION('',(0.,1.,0.)); +#214871 = ORIENTED_EDGE('',*,*,#214872,.T.); +#214872 = EDGE_CURVE('',#214865,#214837,#214873,.T.); +#214873 = LINE('',#214874,#214875); +#214874 = CARTESIAN_POINT('',(178.82915,-69.085842,1.585)); +#214875 = VECTOR('',#214876,1.); +#214876 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#214877 = PLANE('',#214878); +#214878 = AXIS2_PLACEMENT_3D('',#214879,#214880,#214881); +#214879 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214880 = DIRECTION('',(0.,0.,1.)); +#214881 = DIRECTION('',(1.,0.,-0.)); +#214882 = SHELL_BASED_SURFACE_MODEL('',(#214883)); +#214883 = OPEN_SHELL('',(#214884)); +#214884 = ADVANCED_FACE('',(#214885,#215020,#215090),#215160,.T.); +#214885 = FACE_BOUND('',#214886,.F.); +#214886 = EDGE_LOOP('',(#214887,#214898,#214906,#214914,#214922,#214930, + #214939,#214947,#214956,#214964,#214973,#214981,#214989,#214997, + #215005,#215014)); +#214887 = ORIENTED_EDGE('',*,*,#214888,.T.); +#214888 = EDGE_CURVE('',#214889,#214891,#214893,.T.); +#214889 = VERTEX_POINT('',#214890); +#214890 = CARTESIAN_POINT('',(205.999132,-68.958052,1.585)); +#214891 = VERTEX_POINT('',#214892); +#214892 = CARTESIAN_POINT('',(206.247313,-68.713826,1.585)); +#214893 = CIRCLE('',#214894,0.348621382901); +#214894 = AXIS2_PLACEMENT_3D('',#214895,#214896,#214897); +#214895 = CARTESIAN_POINT('',(206.33507322951,-69.05122044383,1.585)); +#214896 = DIRECTION('',(0.,0.,-1.)); +#214897 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#214898 = ORIENTED_EDGE('',*,*,#214899,.T.); +#214899 = EDGE_CURVE('',#214891,#214900,#214902,.T.); +#214900 = VERTEX_POINT('',#214901); +#214901 = CARTESIAN_POINT('',(206.324196,-68.713826,1.585)); +#214902 = LINE('',#214903,#214904); +#214903 = CARTESIAN_POINT('',(206.247313,-68.713826,1.585)); +#214904 = VECTOR('',#214905,1.); +#214905 = DIRECTION('',(1.,0.,0.)); +#214906 = ORIENTED_EDGE('',*,*,#214907,.T.); +#214907 = EDGE_CURVE('',#214900,#214908,#214910,.T.); +#214908 = VERTEX_POINT('',#214909); +#214909 = CARTESIAN_POINT('',(206.452085,-68.777252,1.585)); +#214910 = LINE('',#214911,#214912); +#214911 = CARTESIAN_POINT('',(206.324196,-68.713826,1.585)); +#214912 = VECTOR('',#214913,1.); +#214913 = DIRECTION('',(0.895875328998,-0.444305519764,0.)); +#214914 = ORIENTED_EDGE('',*,*,#214915,.T.); +#214915 = EDGE_CURVE('',#214908,#214916,#214918,.T.); +#214916 = VERTEX_POINT('',#214917); +#214917 = CARTESIAN_POINT('',(206.50004,-68.824176,1.585)); +#214918 = LINE('',#214919,#214920); +#214919 = CARTESIAN_POINT('',(206.452085,-68.777252,1.585)); +#214920 = VECTOR('',#214921,1.); +#214921 = DIRECTION('',(0.714748339676,-0.699381734771,0.)); +#214922 = ORIENTED_EDGE('',*,*,#214923,.T.); +#214923 = EDGE_CURVE('',#214916,#214924,#214926,.T.); +#214924 = VERTEX_POINT('',#214925); +#214925 = CARTESIAN_POINT('',(206.561737,-68.767922,1.585)); +#214926 = LINE('',#214927,#214928); +#214927 = CARTESIAN_POINT('',(206.50004,-68.824176,1.585)); +#214928 = VECTOR('',#214929,1.); +#214929 = DIRECTION('',(0.738950757729,0.673759436039,0.)); +#214930 = ORIENTED_EDGE('',*,*,#214931,.T.); +#214931 = EDGE_CURVE('',#214924,#214932,#214934,.T.); +#214932 = VERTEX_POINT('',#214933); +#214933 = CARTESIAN_POINT('',(207.023513,-68.777252,1.585)); +#214934 = CIRCLE('',#214935,0.395776174071); +#214935 = AXIS2_PLACEMENT_3D('',#214936,#214937,#214938); +#214936 = CARTESIAN_POINT('',(206.78613225855,-69.09393664369,1.585)); +#214937 = DIRECTION('',(0.,0.,-1.)); +#214938 = DIRECTION('',(-0.566975157302,0.823734891214,0.)); +#214939 = ORIENTED_EDGE('',*,*,#214940,.T.); +#214940 = EDGE_CURVE('',#214932,#214941,#214943,.T.); +#214941 = VERTEX_POINT('',#214942); +#214942 = CARTESIAN_POINT('',(207.086967,-68.842782,1.585)); +#214943 = LINE('',#214944,#214945); +#214944 = CARTESIAN_POINT('',(207.023513,-68.777252,1.585)); +#214945 = VECTOR('',#214946,1.); +#214946 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#214947 = ORIENTED_EDGE('',*,*,#214948,.T.); +#214948 = EDGE_CURVE('',#214941,#214949,#214951,.T.); +#214949 = VERTEX_POINT('',#214950); +#214950 = CARTESIAN_POINT('',(207.0816,-69.310859,1.585)); +#214951 = CIRCLE('',#214952,0.397465645887); +#214952 = AXIS2_PLACEMENT_3D('',#214953,#214954,#214955); +#214953 = CARTESIAN_POINT('',(206.76306059713,-69.07313733821,1.585)); +#214954 = DIRECTION('',(0.,0.,-1.)); +#214955 = DIRECTION('',(0.814929305758,0.579560373574,0.)); +#214956 = ORIENTED_EDGE('',*,*,#214957,.T.); +#214957 = EDGE_CURVE('',#214949,#214958,#214960,.T.); +#214958 = VERTEX_POINT('',#214959); +#214959 = CARTESIAN_POINT('',(207.016067,-69.374312,1.585)); +#214960 = LINE('',#214961,#214962); +#214961 = CARTESIAN_POINT('',(207.0816,-69.310859,1.585)); +#214962 = VECTOR('',#214963,1.); +#214963 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#214964 = ORIENTED_EDGE('',*,*,#214965,.T.); +#214965 = EDGE_CURVE('',#214958,#214966,#214968,.T.); +#214966 = VERTEX_POINT('',#214967); +#214967 = CARTESIAN_POINT('',(206.547994,-69.368945,1.585)); +#214968 = CIRCLE('',#214969,0.397460357127); +#214969 = AXIS2_PLACEMENT_3D('',#214970,#214971,#214972); +#214970 = CARTESIAN_POINT('',(206.78571363493,-69.05041068371,1.585)); +#214971 = DIRECTION('',(-0.,0.,-1.)); +#214972 = DIRECTION('',(0.579563121028,-0.81492735182,-0.)); +#214973 = ORIENTED_EDGE('',*,*,#214974,.T.); +#214974 = EDGE_CURVE('',#214966,#214975,#214977,.T.); +#214975 = VERTEX_POINT('',#214976); +#214976 = CARTESIAN_POINT('',(206.50004,-69.322022,1.585)); +#214977 = LINE('',#214978,#214979); +#214978 = CARTESIAN_POINT('',(206.547994,-69.368945,1.585)); +#214979 = VECTOR('',#214980,1.); +#214980 = DIRECTION('',(-0.71474849986,0.699381571067,0.)); +#214981 = ORIENTED_EDGE('',*,*,#214982,.T.); +#214982 = EDGE_CURVE('',#214975,#214983,#214985,.T.); +#214983 = VERTEX_POINT('',#214984); +#214984 = CARTESIAN_POINT('',(206.438343,-69.378276,1.585)); +#214985 = LINE('',#214986,#214987); +#214986 = CARTESIAN_POINT('',(206.50004,-69.322022,1.585)); +#214987 = VECTOR('',#214988,1.); +#214988 = DIRECTION('',(-0.738950757729,-0.673759436039,0.)); +#214989 = ORIENTED_EDGE('',*,*,#214990,.T.); +#214990 = EDGE_CURVE('',#214983,#214991,#214993,.T.); +#214991 = VERTEX_POINT('',#214992); +#214992 = CARTESIAN_POINT('',(206.324196,-69.432372,1.585)); +#214993 = LINE('',#214994,#214995); +#214994 = CARTESIAN_POINT('',(206.438343,-69.378276,1.585)); +#214995 = VECTOR('',#214996,1.); +#214996 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#214997 = ORIENTED_EDGE('',*,*,#214998,.T.); +#214998 = EDGE_CURVE('',#214991,#214999,#215001,.T.); +#214999 = VERTEX_POINT('',#215000); +#215000 = CARTESIAN_POINT('',(206.242135,-69.43115,1.585)); +#215001 = LINE('',#215002,#215003); +#215002 = CARTESIAN_POINT('',(206.324196,-69.432372,1.585)); +#215003 = VECTOR('',#215004,1.); +#215004 = DIRECTION('',(-0.999889142116,1.488971047957E-02,0.)); +#215005 = ORIENTED_EDGE('',*,*,#215006,.T.); +#215006 = EDGE_CURVE('',#214999,#215007,#215009,.T.); +#215007 = VERTEX_POINT('',#215008); +#215008 = CARTESIAN_POINT('',(205.99791,-69.182969,1.585)); +#215009 = CIRCLE('',#215010,0.348628078749); +#215010 = AXIS2_PLACEMENT_3D('',#215011,#215012,#215013); +#215011 = CARTESIAN_POINT('',(206.3353100302,-69.09520364857,1.585)); +#215012 = DIRECTION('',(0.,0.,-1.)); +#215013 = DIRECTION('',(-0.267261978831,-0.963623907275,-0.)); +#215014 = ORIENTED_EDGE('',*,*,#215015,.T.); +#215015 = EDGE_CURVE('',#215007,#214889,#215016,.T.); +#215016 = LINE('',#215017,#215018); +#215017 = CARTESIAN_POINT('',(205.99791,-69.182969,1.585)); +#215018 = VECTOR('',#215019,1.); +#215019 = DIRECTION('',(5.433035139454E-03,0.999985240956,0.)); +#215020 = FACE_BOUND('',#215021,.F.); +#215021 = EDGE_LOOP('',(#215022,#215033,#215041,#215050,#215058,#215067, + #215075,#215084)); +#215022 = ORIENTED_EDGE('',*,*,#215023,.T.); +#215023 = EDGE_CURVE('',#215024,#215026,#215028,.T.); +#215024 = VERTEX_POINT('',#215025); +#215025 = CARTESIAN_POINT('',(206.42504,-68.995566,1.585)); +#215026 = VERTEX_POINT('',#215027); +#215027 = CARTESIAN_POINT('',(206.291859,-68.862385,1.585)); +#215028 = CIRCLE('',#215029,0.18686440374); +#215029 = AXIS2_PLACEMENT_3D('',#215030,#215031,#215032); +#215030 = CARTESIAN_POINT('',(206.244323,-69.043102,1.585)); +#215031 = DIRECTION('',(0.,0.,1.)); +#215032 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#215033 = ORIENTED_EDGE('',*,*,#215034,.T.); +#215034 = EDGE_CURVE('',#215026,#215035,#215037,.T.); +#215035 = VERTEX_POINT('',#215036); +#215036 = CARTESIAN_POINT('',(206.27965,-68.862385,1.585)); +#215037 = LINE('',#215038,#215039); +#215038 = CARTESIAN_POINT('',(206.291859,-68.862385,1.585)); +#215039 = VECTOR('',#215040,1.); +#215040 = DIRECTION('',(-1.,0.,0.)); +#215041 = ORIENTED_EDGE('',*,*,#215042,.T.); +#215042 = EDGE_CURVE('',#215035,#215043,#215045,.T.); +#215043 = VERTEX_POINT('',#215044); +#215044 = CARTESIAN_POINT('',(206.146469,-68.995566,1.585)); +#215045 = CIRCLE('',#215046,0.18686440374); +#215046 = AXIS2_PLACEMENT_3D('',#215047,#215048,#215049); +#215047 = CARTESIAN_POINT('',(206.327186,-69.043102,1.585)); +#215048 = DIRECTION('',(0.,0.,1.)); +#215049 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#215050 = ORIENTED_EDGE('',*,*,#215051,.T.); +#215051 = EDGE_CURVE('',#215043,#215052,#215054,.T.); +#215052 = VERTEX_POINT('',#215053); +#215053 = CARTESIAN_POINT('',(206.146469,-69.150632,1.585)); +#215054 = LINE('',#215055,#215056); +#215055 = CARTESIAN_POINT('',(206.146469,-68.995566,1.585)); +#215056 = VECTOR('',#215057,1.); +#215057 = DIRECTION('',(0.,-1.,0.)); +#215058 = ORIENTED_EDGE('',*,*,#215059,.T.); +#215059 = EDGE_CURVE('',#215052,#215060,#215062,.T.); +#215060 = VERTEX_POINT('',#215061); +#215061 = CARTESIAN_POINT('',(206.27965,-69.283813,1.585)); +#215062 = CIRCLE('',#215063,0.18686440374); +#215063 = AXIS2_PLACEMENT_3D('',#215064,#215065,#215066); +#215064 = CARTESIAN_POINT('',(206.327186,-69.103096,1.585)); +#215065 = DIRECTION('',(0.,0.,1.)); +#215066 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#215067 = ORIENTED_EDGE('',*,*,#215068,.T.); +#215068 = EDGE_CURVE('',#215060,#215069,#215071,.T.); +#215069 = VERTEX_POINT('',#215070); +#215070 = CARTESIAN_POINT('',(206.291859,-69.283813,1.585)); +#215071 = LINE('',#215072,#215073); +#215072 = CARTESIAN_POINT('',(206.27965,-69.283813,1.585)); +#215073 = VECTOR('',#215074,1.); +#215074 = DIRECTION('',(1.,0.,0.)); +#215075 = ORIENTED_EDGE('',*,*,#215076,.T.); +#215076 = EDGE_CURVE('',#215069,#215077,#215079,.T.); +#215077 = VERTEX_POINT('',#215078); +#215078 = CARTESIAN_POINT('',(206.42504,-69.150632,1.585)); +#215079 = CIRCLE('',#215080,0.18686440374); +#215080 = AXIS2_PLACEMENT_3D('',#215081,#215082,#215083); +#215081 = CARTESIAN_POINT('',(206.244323,-69.103096,1.585)); +#215082 = DIRECTION('',(0.,0.,1.)); +#215083 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#215084 = ORIENTED_EDGE('',*,*,#215085,.T.); +#215085 = EDGE_CURVE('',#215077,#215024,#215086,.T.); +#215086 = LINE('',#215087,#215088); +#215087 = CARTESIAN_POINT('',(206.42504,-69.150632,1.585)); +#215088 = VECTOR('',#215089,1.); +#215089 = DIRECTION('',(0.,1.,0.)); +#215090 = FACE_BOUND('',#215091,.F.); +#215091 = EDGE_LOOP('',(#215092,#215103,#215111,#215120,#215128,#215137, + #215145,#215154)); +#215092 = ORIENTED_EDGE('',*,*,#215093,.T.); +#215093 = EDGE_CURVE('',#215094,#215096,#215098,.T.); +#215094 = VERTEX_POINT('',#215095); +#215095 = CARTESIAN_POINT('',(206.931803,-68.896643,1.585)); +#215096 = VERTEX_POINT('',#215097); +#215097 = CARTESIAN_POINT('',(206.639705,-68.896643,1.585)); +#215098 = CIRCLE('',#215099,0.252889603602); +#215099 = AXIS2_PLACEMENT_3D('',#215100,#215101,#215102); +#215100 = CARTESIAN_POINT('',(206.785754,-69.103096,1.585)); +#215101 = DIRECTION('',(0.,0.,1.)); +#215102 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#215103 = ORIENTED_EDGE('',*,*,#215104,.T.); +#215104 = EDGE_CURVE('',#215096,#215105,#215107,.T.); +#215105 = VERTEX_POINT('',#215106); +#215106 = CARTESIAN_POINT('',(206.609298,-68.92705,1.585)); +#215107 = LINE('',#215108,#215109); +#215108 = CARTESIAN_POINT('',(206.639705,-68.896643,1.585)); +#215109 = VECTOR('',#215110,1.); +#215110 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#215111 = ORIENTED_EDGE('',*,*,#215112,.T.); +#215112 = EDGE_CURVE('',#215105,#215113,#215115,.T.); +#215113 = VERTEX_POINT('',#215114); +#215114 = CARTESIAN_POINT('',(206.609298,-69.219148,1.585)); +#215115 = CIRCLE('',#215116,0.252889603602); +#215116 = AXIS2_PLACEMENT_3D('',#215117,#215118,#215119); +#215117 = CARTESIAN_POINT('',(206.815751,-69.073099,1.585)); +#215118 = DIRECTION('',(0.,0.,1.)); +#215119 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#215120 = ORIENTED_EDGE('',*,*,#215121,.T.); +#215121 = EDGE_CURVE('',#215113,#215122,#215124,.T.); +#215122 = VERTEX_POINT('',#215123); +#215123 = CARTESIAN_POINT('',(206.639705,-69.249555,1.585)); +#215124 = LINE('',#215125,#215126); +#215125 = CARTESIAN_POINT('',(206.609298,-69.219148,1.585)); +#215126 = VECTOR('',#215127,1.); +#215127 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#215128 = ORIENTED_EDGE('',*,*,#215129,.T.); +#215129 = EDGE_CURVE('',#215122,#215130,#215132,.T.); +#215130 = VERTEX_POINT('',#215131); +#215131 = CARTESIAN_POINT('',(206.931803,-69.249554,1.585)); +#215132 = CIRCLE('',#215133,0.25288804141); +#215133 = AXIS2_PLACEMENT_3D('',#215134,#215135,#215136); +#215134 = CARTESIAN_POINT('',(206.78575329321,-69.04310341357,1.585)); +#215135 = DIRECTION('',(0.,0.,1.)); +#215136 = DIRECTION('',(-0.577521548265,-0.81637544138,0.)); +#215137 = ORIENTED_EDGE('',*,*,#215138,.T.); +#215138 = EDGE_CURVE('',#215130,#215139,#215141,.T.); +#215139 = VERTEX_POINT('',#215140); +#215140 = CARTESIAN_POINT('',(206.962211,-69.219147,1.585)); +#215141 = LINE('',#215142,#215143); +#215142 = CARTESIAN_POINT('',(206.931803,-69.249554,1.585)); +#215143 = VECTOR('',#215144,1.); +#215144 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#215145 = ORIENTED_EDGE('',*,*,#215146,.T.); +#215146 = EDGE_CURVE('',#215139,#215147,#215149,.T.); +#215147 = VERTEX_POINT('',#215148); +#215148 = CARTESIAN_POINT('',(206.962211,-68.92705,1.585)); +#215149 = CIRCLE('',#215150,0.252886650841); +#215150 = AXIS2_PLACEMENT_3D('',#215151,#215152,#215153); +#215151 = CARTESIAN_POINT('',(206.7557612632,-69.0730985,1.585)); +#215152 = DIRECTION('',(0.,-0.,1.)); +#215153 = DIRECTION('',(0.816372616368,-0.577525541638,-0.)); +#215154 = ORIENTED_EDGE('',*,*,#215155,.T.); +#215155 = EDGE_CURVE('',#215147,#215094,#215156,.T.); +#215156 = LINE('',#215157,#215158); +#215157 = CARTESIAN_POINT('',(206.962211,-68.92705,1.585)); +#215158 = VECTOR('',#215159,1.); +#215159 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#215160 = PLANE('',#215161); +#215161 = AXIS2_PLACEMENT_3D('',#215162,#215163,#215164); +#215162 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215163 = DIRECTION('',(0.,0.,1.)); +#215164 = DIRECTION('',(1.,0.,-0.)); +#215165 = SHELL_BASED_SURFACE_MODEL('',(#215166)); +#215166 = OPEN_SHELL('',(#215167)); +#215167 = ADVANCED_FACE('',(#215168),#215204,.T.); +#215168 = FACE_BOUND('',#215169,.F.); +#215169 = EDGE_LOOP('',(#215170,#215181,#215189,#215198)); +#215170 = ORIENTED_EDGE('',*,*,#215171,.T.); +#215171 = EDGE_CURVE('',#215172,#215174,#215176,.T.); +#215172 = VERTEX_POINT('',#215173); +#215173 = CARTESIAN_POINT('',(101.129392,-68.8606,1.585)); +#215174 = VERTEX_POINT('',#215175); +#215175 = CARTESIAN_POINT('',(101.129392,-68.7406,1.585)); +#215176 = CIRCLE('',#215177,6.000000000042E-02); +#215177 = AXIS2_PLACEMENT_3D('',#215178,#215179,#215180); +#215178 = CARTESIAN_POINT('',(101.12939177441,-68.8006,1.585)); +#215179 = DIRECTION('',(0.,0.,-1.)); +#215180 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#215181 = ORIENTED_EDGE('',*,*,#215182,.T.); +#215182 = EDGE_CURVE('',#215174,#215183,#215185,.T.); +#215183 = VERTEX_POINT('',#215184); +#215184 = CARTESIAN_POINT('',(101.603908,-68.7406,1.585)); +#215185 = LINE('',#215186,#215187); +#215186 = CARTESIAN_POINT('',(101.129392,-68.7406,1.585)); +#215187 = VECTOR('',#215188,1.); +#215188 = DIRECTION('',(1.,0.,0.)); +#215189 = ORIENTED_EDGE('',*,*,#215190,.T.); +#215190 = EDGE_CURVE('',#215183,#215191,#215193,.T.); +#215191 = VERTEX_POINT('',#215192); +#215192 = CARTESIAN_POINT('',(101.603908,-68.8606,1.585)); +#215193 = CIRCLE('',#215194,6.000000000043E-02); +#215194 = AXIS2_PLACEMENT_3D('',#215195,#215196,#215197); +#215195 = CARTESIAN_POINT('',(101.60390822558,-68.8006,1.585)); +#215196 = DIRECTION('',(0.,0.,-1.)); +#215197 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#215198 = ORIENTED_EDGE('',*,*,#215199,.T.); +#215199 = EDGE_CURVE('',#215191,#215172,#215200,.T.); +#215200 = LINE('',#215201,#215202); +#215201 = CARTESIAN_POINT('',(101.603908,-68.8606,1.585)); +#215202 = VECTOR('',#215203,1.); +#215203 = DIRECTION('',(-1.,0.,0.)); +#215204 = PLANE('',#215205); +#215205 = AXIS2_PLACEMENT_3D('',#215206,#215207,#215208); +#215206 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215207 = DIRECTION('',(0.,0.,1.)); +#215208 = DIRECTION('',(1.,0.,-0.)); +#215209 = SHELL_BASED_SURFACE_MODEL('',(#215210)); +#215210 = OPEN_SHELL('',(#215211)); +#215211 = ADVANCED_FACE('',(#215212,#215314),#215416,.T.); +#215212 = FACE_BOUND('',#215213,.F.); +#215213 = EDGE_LOOP('',(#215214,#215224,#215233,#215241,#215249,#215258, + #215266,#215274,#215283,#215291,#215299,#215308)); +#215214 = ORIENTED_EDGE('',*,*,#215215,.T.); +#215215 = EDGE_CURVE('',#215216,#215218,#215220,.T.); +#215216 = VERTEX_POINT('',#215217); +#215217 = CARTESIAN_POINT('',(179.306866,-68.093315,1.585)); +#215218 = VERTEX_POINT('',#215219); +#215219 = CARTESIAN_POINT('',(179.423755,-68.036053,1.585)); +#215220 = LINE('',#215221,#215222); +#215221 = CARTESIAN_POINT('',(179.306866,-68.093315,1.585)); +#215222 = VECTOR('',#215223,1.); +#215223 = DIRECTION('',(0.898031613354,0.439930928007,0.)); +#215224 = ORIENTED_EDGE('',*,*,#215225,.T.); +#215225 = EDGE_CURVE('',#215218,#215226,#215228,.T.); +#215226 = VERTEX_POINT('',#215227); +#215227 = CARTESIAN_POINT('',(180.094533,-68.041732,1.585)); +#215228 = CIRCLE('',#215229,0.965975843555); +#215229 = AXIS2_PLACEMENT_3D('',#215230,#215231,#215232); +#215230 = CARTESIAN_POINT('',(179.75147484794,-68.94473833145,1.585)); +#215231 = DIRECTION('',(0.,0.,-1.)); +#215232 = DIRECTION('',(-0.339262984817,0.940691568546,0.)); +#215233 = ORIENTED_EDGE('',*,*,#215234,.T.); +#215234 = EDGE_CURVE('',#215226,#215235,#215237,.T.); +#215235 = VERTEX_POINT('',#215236); +#215236 = CARTESIAN_POINT('',(180.203513,-68.098681,1.585)); +#215237 = LINE('',#215238,#215239); +#215238 = CARTESIAN_POINT('',(180.094533,-68.041732,1.585)); +#215239 = VECTOR('',#215240,1.); +#215240 = DIRECTION('',(0.886284927964,-0.46314039606,0.)); +#215241 = ORIENTED_EDGE('',*,*,#215242,.T.); +#215242 = EDGE_CURVE('',#215235,#215243,#215245,.T.); +#215243 = VERTEX_POINT('',#215244); +#215244 = CARTESIAN_POINT('',(180.266967,-68.164211,1.585)); +#215245 = LINE('',#215246,#215247); +#215246 = CARTESIAN_POINT('',(180.203513,-68.098681,1.585)); +#215247 = VECTOR('',#215248,1.); +#215248 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#215249 = ORIENTED_EDGE('',*,*,#215250,.T.); +#215250 = EDGE_CURVE('',#215243,#215251,#215253,.T.); +#215251 = VERTEX_POINT('',#215252); +#215252 = CARTESIAN_POINT('',(180.2616,-68.53705,1.585)); +#215253 = CIRCLE('',#215254,0.290999070188); +#215254 = AXIS2_PLACEMENT_3D('',#215255,#215256,#215257); +#215255 = CARTESIAN_POINT('',(180.04087650487,-68.34741456673,1.585)); +#215256 = DIRECTION('',(0.,0.,-1.)); +#215257 = DIRECTION('',(0.776945764738,0.629567533038,0.)); +#215258 = ORIENTED_EDGE('',*,*,#215259,.T.); +#215259 = EDGE_CURVE('',#215251,#215260,#215262,.T.); +#215260 = VERTEX_POINT('',#215261); +#215261 = CARTESIAN_POINT('',(180.196067,-68.600503,1.585)); +#215262 = LINE('',#215263,#215264); +#215263 = CARTESIAN_POINT('',(180.2616,-68.53705,1.585)); +#215264 = VECTOR('',#215265,1.); +#215265 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#215266 = ORIENTED_EDGE('',*,*,#215267,.T.); +#215267 = EDGE_CURVE('',#215260,#215268,#215270,.T.); +#215268 = VERTEX_POINT('',#215269); +#215269 = CARTESIAN_POINT('',(180.079182,-68.657765,1.585)); +#215270 = LINE('',#215271,#215272); +#215271 = CARTESIAN_POINT('',(180.196067,-68.600503,1.585)); +#215272 = VECTOR('',#215273,1.); +#215273 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#215274 = ORIENTED_EDGE('',*,*,#215275,.T.); +#215275 = EDGE_CURVE('',#215268,#215276,#215278,.T.); +#215276 = VERTEX_POINT('',#215277); +#215277 = CARTESIAN_POINT('',(179.408404,-68.652086,1.585)); +#215278 = CIRCLE('',#215279,0.967158496826); +#215279 = AXIS2_PLACEMENT_3D('',#215280,#215281,#215282); +#215280 = CARTESIAN_POINT('',(179.75147282772,-67.74781870686,1.585)); +#215281 = DIRECTION('',(-0.,0.,-1.)); +#215282 = DIRECTION('',(0.338837091703,-0.940845059128,-0.)); +#215283 = ORIENTED_EDGE('',*,*,#215284,.T.); +#215284 = EDGE_CURVE('',#215276,#215285,#215287,.T.); +#215285 = VERTEX_POINT('',#215286); +#215286 = CARTESIAN_POINT('',(179.299423,-68.595136,1.585)); +#215287 = LINE('',#215288,#215289); +#215288 = CARTESIAN_POINT('',(179.408404,-68.652086,1.585)); +#215289 = VECTOR('',#215290,1.); +#215290 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#215291 = ORIENTED_EDGE('',*,*,#215292,.T.); +#215292 = EDGE_CURVE('',#215285,#215293,#215295,.T.); +#215293 = VERTEX_POINT('',#215294); +#215294 = CARTESIAN_POINT('',(179.23597,-68.529606,1.585)); +#215295 = LINE('',#215296,#215297); +#215296 = CARTESIAN_POINT('',(179.299423,-68.595136,1.585)); +#215297 = VECTOR('',#215298,1.); +#215298 = DIRECTION('',(-0.695630129574,0.718400113328,0.)); +#215299 = ORIENTED_EDGE('',*,*,#215300,.T.); +#215300 = EDGE_CURVE('',#215293,#215301,#215303,.T.); +#215301 = VERTEX_POINT('',#215302); +#215302 = CARTESIAN_POINT('',(179.241336,-68.156768,1.585)); +#215303 = CIRCLE('',#215304,0.291002094877); +#215304 = AXIS2_PLACEMENT_3D('',#215305,#215306,#215307); +#215305 = CARTESIAN_POINT('',(179.46206436573,-68.34640240558,1.585)); +#215306 = DIRECTION('',(0.,0.,-1.)); +#215307 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#215308 = ORIENTED_EDGE('',*,*,#215309,.T.); +#215309 = EDGE_CURVE('',#215301,#215216,#215310,.T.); +#215310 = LINE('',#215311,#215312); +#215311 = CARTESIAN_POINT('',(179.241336,-68.156768,1.585)); +#215312 = VECTOR('',#215313,1.); +#215313 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#215314 = FACE_BOUND('',#215315,.F.); +#215315 = EDGE_LOOP('',(#215316,#215327,#215335,#215343,#215352,#215360, + #215368,#215377,#215385,#215393,#215402,#215410)); +#215316 = ORIENTED_EDGE('',*,*,#215317,.T.); +#215317 = EDGE_CURVE('',#215318,#215320,#215322,.T.); +#215318 = VERTEX_POINT('',#215319); +#215319 = CARTESIAN_POINT('',(180.034816,-68.179578,1.585)); +#215320 = VERTEX_POINT('',#215321); +#215321 = CARTESIAN_POINT('',(179.468121,-68.179578,1.585)); +#215322 = CIRCLE('',#215323,0.815450468383); +#215323 = AXIS2_PLACEMENT_3D('',#215324,#215325,#215326); +#215324 = CARTESIAN_POINT('',(179.7514685,-68.94421756255,1.585)); +#215325 = DIRECTION('',(0.,0.,1.)); +#215326 = DIRECTION('',(0.347473587895,0.937689770508,-0.)); +#215327 = ORIENTED_EDGE('',*,*,#215328,.T.); +#215328 = EDGE_CURVE('',#215320,#215329,#215331,.T.); +#215329 = VERTEX_POINT('',#215330); +#215330 = CARTESIAN_POINT('',(179.391134,-68.218072,1.585)); +#215331 = LINE('',#215332,#215333); +#215332 = CARTESIAN_POINT('',(179.468121,-68.179578,1.585)); +#215333 = VECTOR('',#215334,1.); +#215334 = DIRECTION('',(-0.894424867414,-0.447218242641,0.)); +#215335 = ORIENTED_EDGE('',*,*,#215336,.T.); +#215336 = EDGE_CURVE('',#215329,#215337,#215339,.T.); +#215337 = VERTEX_POINT('',#215338); +#215338 = CARTESIAN_POINT('',(179.360727,-68.248479,1.585)); +#215339 = LINE('',#215340,#215341); +#215340 = CARTESIAN_POINT('',(179.391134,-68.218072,1.585)); +#215341 = VECTOR('',#215342,1.); +#215342 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#215343 = ORIENTED_EDGE('',*,*,#215344,.T.); +#215344 = EDGE_CURVE('',#215337,#215345,#215347,.T.); +#215345 = VERTEX_POINT('',#215346); +#215346 = CARTESIAN_POINT('',(179.360727,-68.445339,1.585)); +#215347 = CIRCLE('',#215348,0.148516804184); +#215348 = AXIS2_PLACEMENT_3D('',#215349,#215350,#215351); +#215349 = CARTESIAN_POINT('',(179.471942,-68.346909,1.585)); +#215350 = DIRECTION('',(0.,0.,1.)); +#215351 = DIRECTION('',(-0.748837820819,0.662753286006,0.)); +#215352 = ORIENTED_EDGE('',*,*,#215353,.T.); +#215353 = EDGE_CURVE('',#215345,#215354,#215356,.T.); +#215354 = VERTEX_POINT('',#215355); +#215355 = CARTESIAN_POINT('',(179.391134,-68.475746,1.585)); +#215356 = LINE('',#215357,#215358); +#215357 = CARTESIAN_POINT('',(179.360727,-68.445339,1.585)); +#215358 = VECTOR('',#215359,1.); +#215359 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#215360 = ORIENTED_EDGE('',*,*,#215361,.T.); +#215361 = EDGE_CURVE('',#215354,#215362,#215364,.T.); +#215362 = VERTEX_POINT('',#215363); +#215363 = CARTESIAN_POINT('',(179.468121,-68.514239,1.585)); +#215364 = LINE('',#215365,#215366); +#215365 = CARTESIAN_POINT('',(179.391134,-68.475746,1.585)); +#215366 = VECTOR('',#215367,1.); +#215367 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#215368 = ORIENTED_EDGE('',*,*,#215369,.T.); +#215369 = EDGE_CURVE('',#215362,#215370,#215372,.T.); +#215370 = VERTEX_POINT('',#215371); +#215371 = CARTESIAN_POINT('',(180.034816,-68.514239,1.585)); +#215372 = CIRCLE('',#215373,0.815433004022); +#215373 = AXIS2_PLACEMENT_3D('',#215374,#215375,#215376); +#215374 = CARTESIAN_POINT('',(179.7514685,-67.74961806235,1.585)); +#215375 = DIRECTION('',(0.,0.,1.)); +#215376 = DIRECTION('',(-0.347481029836,-0.937687012763,0.)); +#215377 = ORIENTED_EDGE('',*,*,#215378,.T.); +#215378 = EDGE_CURVE('',#215370,#215379,#215381,.T.); +#215379 = VERTEX_POINT('',#215380); +#215380 = CARTESIAN_POINT('',(180.111803,-68.475745,1.585)); +#215381 = LINE('',#215382,#215383); +#215382 = CARTESIAN_POINT('',(180.034816,-68.514239,1.585)); +#215383 = VECTOR('',#215384,1.); +#215384 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#215385 = ORIENTED_EDGE('',*,*,#215386,.T.); +#215386 = EDGE_CURVE('',#215379,#215387,#215389,.T.); +#215387 = VERTEX_POINT('',#215388); +#215388 = CARTESIAN_POINT('',(180.142211,-68.445338,1.585)); +#215389 = LINE('',#215390,#215391); +#215390 = CARTESIAN_POINT('',(180.111803,-68.475745,1.585)); +#215391 = VECTOR('',#215392,1.); +#215392 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#215393 = ORIENTED_EDGE('',*,*,#215394,.T.); +#215394 = EDGE_CURVE('',#215387,#215395,#215397,.T.); +#215395 = VERTEX_POINT('',#215396); +#215396 = CARTESIAN_POINT('',(180.142211,-68.248479,1.585)); +#215397 = CIRCLE('',#215398,0.148515070089); +#215398 = AXIS2_PLACEMENT_3D('',#215399,#215400,#215401); +#215399 = CARTESIAN_POINT('',(180.03099787319,-68.3469085,1.585)); +#215400 = DIRECTION('',(0.,-0.,1.)); +#215401 = DIRECTION('',(0.748833951572,-0.6627576578,-0.)); +#215402 = ORIENTED_EDGE('',*,*,#215403,.T.); +#215403 = EDGE_CURVE('',#215395,#215404,#215406,.T.); +#215404 = VERTEX_POINT('',#215405); +#215405 = CARTESIAN_POINT('',(180.111803,-68.218072,1.585)); +#215406 = LINE('',#215407,#215408); +#215407 = CARTESIAN_POINT('',(180.142211,-68.248479,1.585)); +#215408 = VECTOR('',#215409,1.); +#215409 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#215410 = ORIENTED_EDGE('',*,*,#215411,.T.); +#215411 = EDGE_CURVE('',#215404,#215318,#215412,.T.); +#215412 = LINE('',#215413,#215414); +#215413 = CARTESIAN_POINT('',(180.111803,-68.218072,1.585)); +#215414 = VECTOR('',#215415,1.); +#215415 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#215416 = PLANE('',#215417); +#215417 = AXIS2_PLACEMENT_3D('',#215418,#215419,#215420); +#215418 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215419 = DIRECTION('',(0.,0.,1.)); +#215420 = DIRECTION('',(1.,0.,-0.)); +#215421 = SHELL_BASED_SURFACE_MODEL('',(#215422)); +#215422 = OPEN_SHELL('',(#215423)); +#215423 = ADVANCED_FACE('',(#215424),#215558,.T.); +#215424 = FACE_BOUND('',#215425,.F.); +#215425 = EDGE_LOOP('',(#215426,#215436,#215444,#215453,#215461,#215469, + #215478,#215486,#215495,#215503,#215511,#215519,#215527,#215536, + #215544,#215552)); +#215426 = ORIENTED_EDGE('',*,*,#215427,.T.); +#215427 = EDGE_CURVE('',#215428,#215430,#215432,.T.); +#215428 = VERTEX_POINT('',#215429); +#215429 = CARTESIAN_POINT('',(89.662371,-66.874941,1.585)); +#215430 = VERTEX_POINT('',#215431); +#215431 = CARTESIAN_POINT('',(89.700827,-66.85436,1.585)); +#215432 = LINE('',#215433,#215434); +#215433 = CARTESIAN_POINT('',(89.662371,-66.874941,1.585)); +#215434 = VECTOR('',#215435,1.); +#215435 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#215436 = ORIENTED_EDGE('',*,*,#215437,.T.); +#215437 = EDGE_CURVE('',#215430,#215438,#215440,.T.); +#215438 = VERTEX_POINT('',#215439); +#215439 = CARTESIAN_POINT('',(89.722664,-66.85436,1.585)); +#215440 = LINE('',#215441,#215442); +#215441 = CARTESIAN_POINT('',(89.700827,-66.85436,1.585)); +#215442 = VECTOR('',#215443,1.); +#215443 = DIRECTION('',(1.,0.,0.)); +#215444 = ORIENTED_EDGE('',*,*,#215445,.T.); +#215445 = EDGE_CURVE('',#215438,#215446,#215448,.T.); +#215446 = VERTEX_POINT('',#215447); +#215447 = CARTESIAN_POINT('',(89.790459,-66.927919,1.585)); +#215448 = CIRCLE('',#215449,7.216898094229E-02); +#215449 = AXIS2_PLACEMENT_3D('',#215450,#215451,#215452); +#215450 = CARTESIAN_POINT('',(89.718306063893,-66.92639728342,1.585)); +#215451 = DIRECTION('',(0.,0.,-1.)); +#215452 = DIRECTION('',(6.038516895284E-02,0.998175150648,0.)); +#215453 = ORIENTED_EDGE('',*,*,#215454,.T.); +#215454 = EDGE_CURVE('',#215446,#215455,#215457,.T.); +#215455 = VERTEX_POINT('',#215456); +#215456 = CARTESIAN_POINT('',(89.790459,-67.852919,1.585)); +#215457 = LINE('',#215458,#215459); +#215458 = CARTESIAN_POINT('',(89.790459,-66.927919,1.585)); +#215459 = VECTOR('',#215460,1.); +#215460 = DIRECTION('',(0.,-1.,0.)); +#215461 = ORIENTED_EDGE('',*,*,#215462,.T.); +#215462 = EDGE_CURVE('',#215455,#215463,#215465,.T.); +#215463 = VERTEX_POINT('',#215464); +#215464 = CARTESIAN_POINT('',(90.015805,-67.85436,1.585)); +#215465 = LINE('',#215466,#215467); +#215466 = CARTESIAN_POINT('',(89.790459,-67.852919,1.585)); +#215467 = VECTOR('',#215468,1.); +#215468 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#215469 = ORIENTED_EDGE('',*,*,#215470,.T.); +#215470 = EDGE_CURVE('',#215463,#215471,#215473,.T.); +#215471 = VERTEX_POINT('',#215472); +#215472 = CARTESIAN_POINT('',(90.001173,-68.002919,1.585)); +#215473 = CIRCLE('',#215474,7.500006711464E-02); +#215474 = AXIS2_PLACEMENT_3D('',#215475,#215476,#215477); +#215475 = CARTESIAN_POINT('',(90.001173067115,-67.92791893288,1.585)); +#215476 = DIRECTION('',(0.,0.,-1.)); +#215477 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#215478 = ORIENTED_EDGE('',*,*,#215479,.T.); +#215479 = EDGE_CURVE('',#215471,#215480,#215482,.T.); +#215480 = VERTEX_POINT('',#215481); +#215481 = CARTESIAN_POINT('',(89.415113,-68.001478,1.585)); +#215482 = LINE('',#215483,#215484); +#215483 = CARTESIAN_POINT('',(90.001173,-68.002919,1.585)); +#215484 = VECTOR('',#215485,1.); +#215485 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#215486 = ORIENTED_EDGE('',*,*,#215487,.T.); +#215487 = EDGE_CURVE('',#215480,#215488,#215490,.T.); +#215488 = VERTEX_POINT('',#215489); +#215489 = CARTESIAN_POINT('',(89.429745,-67.852919,1.585)); +#215490 = CIRCLE('',#215491,7.500006711464E-02); +#215491 = AXIS2_PLACEMENT_3D('',#215492,#215493,#215494); +#215492 = CARTESIAN_POINT('',(89.429744932885,-67.92791906711,1.585)); +#215493 = DIRECTION('',(0.,0.,-1.)); +#215494 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#215495 = ORIENTED_EDGE('',*,*,#215496,.T.); +#215496 = EDGE_CURVE('',#215488,#215497,#215499,.T.); +#215497 = VERTEX_POINT('',#215498); +#215498 = CARTESIAN_POINT('',(89.640459,-67.852919,1.585)); +#215499 = LINE('',#215500,#215501); +#215500 = CARTESIAN_POINT('',(89.429745,-67.852919,1.585)); +#215501 = VECTOR('',#215502,1.); +#215502 = DIRECTION('',(1.,0.,0.)); +#215503 = ORIENTED_EDGE('',*,*,#215504,.T.); +#215504 = EDGE_CURVE('',#215497,#215505,#215507,.T.); +#215505 = VERTEX_POINT('',#215506); +#215506 = CARTESIAN_POINT('',(89.640459,-67.156604,1.585)); +#215507 = LINE('',#215508,#215509); +#215508 = CARTESIAN_POINT('',(89.640459,-67.852919,1.585)); +#215509 = VECTOR('',#215510,1.); +#215510 = DIRECTION('',(0.,1.,0.)); +#215511 = ORIENTED_EDGE('',*,*,#215512,.T.); +#215512 = EDGE_CURVE('',#215505,#215513,#215515,.T.); +#215513 = VERTEX_POINT('',#215514); +#215514 = CARTESIAN_POINT('',(89.564823,-67.229131,1.585)); +#215515 = LINE('',#215516,#215517); +#215516 = CARTESIAN_POINT('',(89.640459,-67.156604,1.585)); +#215517 = VECTOR('',#215518,1.); +#215518 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#215519 = ORIENTED_EDGE('',*,*,#215520,.T.); +#215520 = EDGE_CURVE('',#215513,#215521,#215523,.T.); +#215521 = VERTEX_POINT('',#215522); +#215522 = CARTESIAN_POINT('',(89.449554,-67.28597,1.585)); +#215523 = LINE('',#215524,#215525); +#215524 = CARTESIAN_POINT('',(89.564823,-67.229131,1.585)); +#215525 = VECTOR('',#215526,1.); +#215526 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#215527 = ORIENTED_EDGE('',*,*,#215528,.T.); +#215528 = EDGE_CURVE('',#215521,#215529,#215531,.T.); +#215529 = VERTEX_POINT('',#215530); +#215530 = CARTESIAN_POINT('',(89.396204,-67.146551,1.585)); +#215531 = CIRCLE('',#215532,7.500005272362E-02); +#215532 = AXIS2_PLACEMENT_3D('',#215533,#215534,#215535); +#215533 = CARTESIAN_POINT('',(89.42974455676,-67.21363332972,1.585)); +#215534 = DIRECTION('',(0.,0.,-1.)); +#215535 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#215536 = ORIENTED_EDGE('',*,*,#215537,.T.); +#215537 = EDGE_CURVE('',#215529,#215538,#215540,.T.); +#215538 = VERTEX_POINT('',#215539); +#215539 = CARTESIAN_POINT('',(89.480556,-67.104375,1.585)); +#215540 = LINE('',#215541,#215542); +#215541 = CARTESIAN_POINT('',(89.396204,-67.146551,1.585)); +#215542 = VECTOR('',#215543,1.); +#215543 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#215544 = ORIENTED_EDGE('',*,*,#215545,.T.); +#215545 = EDGE_CURVE('',#215538,#215546,#215548,.T.); +#215546 = VERTEX_POINT('',#215547); +#215547 = CARTESIAN_POINT('',(89.561935,-67.022996,1.585)); +#215548 = LINE('',#215549,#215550); +#215549 = CARTESIAN_POINT('',(89.480556,-67.104375,1.585)); +#215550 = VECTOR('',#215551,1.); +#215551 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#215552 = ORIENTED_EDGE('',*,*,#215553,.T.); +#215553 = EDGE_CURVE('',#215546,#215428,#215554,.T.); +#215554 = LINE('',#215555,#215556); +#215555 = CARTESIAN_POINT('',(89.561935,-67.022996,1.585)); +#215556 = VECTOR('',#215557,1.); +#215557 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#215558 = PLANE('',#215559); +#215559 = AXIS2_PLACEMENT_3D('',#215560,#215561,#215562); +#215560 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215561 = DIRECTION('',(0.,0.,1.)); +#215562 = DIRECTION('',(1.,0.,-0.)); +#215563 = SHELL_BASED_SURFACE_MODEL('',(#215564)); +#215564 = OPEN_SHELL('',(#215565)); +#215565 = ADVANCED_FACE('',(#215566),#215751,.T.); +#215566 = FACE_BOUND('',#215567,.F.); +#215567 = EDGE_LOOP('',(#215568,#215579,#215587,#215596,#215604,#215613, + #215621,#215630,#215638,#215646,#215654,#215663,#215671,#215680, + #215688,#215697,#215705,#215713,#215721,#215729,#215737,#215745)); +#215568 = ORIENTED_EDGE('',*,*,#215569,.T.); +#215569 = EDGE_CURVE('',#215570,#215572,#215574,.T.); +#215570 = VERTEX_POINT('',#215571); +#215571 = CARTESIAN_POINT('',(88.583078,-66.910381,1.585)); +#215572 = VERTEX_POINT('',#215573); +#215573 = CARTESIAN_POINT('',(89.042841,-66.913178,1.585)); +#215574 = CIRCLE('',#215575,0.460785175821); +#215575 = AXIS2_PLACEMENT_3D('',#215576,#215577,#215578); +#215576 = CARTESIAN_POINT('',(88.810530108972,-67.31111597024,1.585)); +#215577 = DIRECTION('',(0.,0.,-1.)); +#215578 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#215579 = ORIENTED_EDGE('',*,*,#215580,.T.); +#215580 = EDGE_CURVE('',#215572,#215581,#215583,.T.); +#215581 = VERTEX_POINT('',#215582); +#215582 = CARTESIAN_POINT('',(89.111152,-66.981489,1.585)); +#215583 = LINE('',#215584,#215585); +#215584 = CARTESIAN_POINT('',(89.042841,-66.913178,1.585)); +#215585 = VECTOR('',#215586,1.); +#215586 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#215587 = ORIENTED_EDGE('',*,*,#215588,.T.); +#215588 = EDGE_CURVE('',#215581,#215589,#215591,.T.); +#215589 = VERTEX_POINT('',#215590); +#215590 = CARTESIAN_POINT('',(88.995759,-67.07619,1.585)); +#215591 = CIRCLE('',#215592,7.500003178655E-02); +#215592 = AXIS2_PLACEMENT_3D('',#215593,#215594,#215595); +#215593 = CARTESIAN_POINT('',(89.048791562127,-67.0231565,1.585)); +#215594 = DIRECTION('',(0.,0.,-1.)); +#215595 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#215596 = ORIENTED_EDGE('',*,*,#215597,.T.); +#215597 = EDGE_CURVE('',#215589,#215598,#215600,.T.); +#215598 = VERTEX_POINT('',#215599); +#215599 = CARTESIAN_POINT('',(88.960659,-67.04109,1.585)); +#215600 = LINE('',#215601,#215602); +#215601 = CARTESIAN_POINT('',(88.995759,-67.07619,1.585)); +#215602 = VECTOR('',#215603,1.); +#215603 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#215604 = ORIENTED_EDGE('',*,*,#215605,.T.); +#215605 = EDGE_CURVE('',#215598,#215606,#215608,.T.); +#215606 = VERTEX_POINT('',#215607); +#215607 = CARTESIAN_POINT('',(88.660735,-67.04109,1.585)); +#215608 = CIRCLE('',#215609,0.299308637371); +#215609 = AXIS2_PLACEMENT_3D('',#215610,#215611,#215612); +#215610 = CARTESIAN_POINT('',(88.810697,-67.300121,1.585)); +#215611 = DIRECTION('',(0.,0.,1.)); +#215612 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#215613 = ORIENTED_EDGE('',*,*,#215614,.T.); +#215614 = EDGE_CURVE('',#215606,#215615,#215617,.T.); +#215615 = VERTEX_POINT('',#215616); +#215616 = CARTESIAN_POINT('',(88.586622,-67.115203,1.585)); +#215617 = LINE('',#215618,#215619); +#215618 = CARTESIAN_POINT('',(88.660735,-67.04109,1.585)); +#215619 = VECTOR('',#215620,1.); +#215620 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#215621 = ORIENTED_EDGE('',*,*,#215622,.T.); +#215622 = EDGE_CURVE('',#215615,#215623,#215625,.T.); +#215623 = VERTEX_POINT('',#215624); +#215624 = CARTESIAN_POINT('',(88.504745,-67.490113,1.585)); +#215625 = CIRCLE('',#215626,0.611712714363); +#215626 = AXIS2_PLACEMENT_3D('',#215627,#215628,#215629); +#215627 = CARTESIAN_POINT('',(89.113150275217,-67.4265876822,1.585)); +#215628 = DIRECTION('',(0.,0.,1.)); +#215629 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#215630 = ORIENTED_EDGE('',*,*,#215631,.T.); +#215631 = EDGE_CURVE('',#215623,#215632,#215634,.T.); +#215632 = VERTEX_POINT('',#215633); +#215633 = CARTESIAN_POINT('',(88.548128,-67.663647,1.585)); +#215634 = LINE('',#215635,#215636); +#215635 = CARTESIAN_POINT('',(88.504745,-67.490113,1.585)); +#215636 = VECTOR('',#215637,1.); +#215637 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#215638 = ORIENTED_EDGE('',*,*,#215639,.T.); +#215639 = EDGE_CURVE('',#215632,#215640,#215642,.T.); +#215640 = VERTEX_POINT('',#215641); +#215641 = CARTESIAN_POINT('',(88.586622,-67.740634,1.585)); +#215642 = LINE('',#215643,#215644); +#215643 = CARTESIAN_POINT('',(88.548128,-67.663647,1.585)); +#215644 = VECTOR('',#215645,1.); +#215645 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#215646 = ORIENTED_EDGE('',*,*,#215647,.T.); +#215647 = EDGE_CURVE('',#215640,#215648,#215650,.T.); +#215648 = VERTEX_POINT('',#215649); +#215649 = CARTESIAN_POINT('',(88.660735,-67.814748,1.585)); +#215650 = LINE('',#215651,#215652); +#215651 = CARTESIAN_POINT('',(88.586622,-67.740634,1.585)); +#215652 = VECTOR('',#215653,1.); +#215653 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#215654 = ORIENTED_EDGE('',*,*,#215655,.T.); +#215655 = EDGE_CURVE('',#215648,#215656,#215658,.T.); +#215656 = VERTEX_POINT('',#215657); +#215657 = CARTESIAN_POINT('',(88.960659,-67.814747,1.585)); +#215658 = CIRCLE('',#215659,0.299305962385); +#215659 = AXIS2_PLACEMENT_3D('',#215660,#215661,#215662); +#215660 = CARTESIAN_POINT('',(88.810696136355,-67.55571959093,1.585)); +#215661 = DIRECTION('',(0.,0.,1.)); +#215662 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#215663 = ORIENTED_EDGE('',*,*,#215664,.T.); +#215664 = EDGE_CURVE('',#215656,#215665,#215667,.T.); +#215665 = VERTEX_POINT('',#215666); +#215666 = CARTESIAN_POINT('',(89.007124,-67.77032,1.585)); +#215667 = LINE('',#215668,#215669); +#215668 = CARTESIAN_POINT('',(88.960659,-67.814747,1.585)); +#215669 = VECTOR('',#215670,1.); +#215670 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#215671 = ORIENTED_EDGE('',*,*,#215672,.T.); +#215672 = EDGE_CURVE('',#215665,#215673,#215675,.T.); +#215673 = VERTEX_POINT('',#215674); +#215674 = CARTESIAN_POINT('',(89.101825,-67.885713,1.585)); +#215675 = CIRCLE('',#215676,7.499993690111E-02); +#215676 = AXIS2_PLACEMENT_3D('',#215677,#215678,#215679); +#215677 = CARTESIAN_POINT('',(89.048792248309,-67.83267982374,1.585)); +#215678 = DIRECTION('',(0.,0.,-1.)); +#215679 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#215680 = ORIENTED_EDGE('',*,*,#215681,.T.); +#215681 = EDGE_CURVE('',#215673,#215682,#215684,.T.); +#215682 = VERTEX_POINT('',#215683); +#215683 = CARTESIAN_POINT('',(89.038315,-67.945457,1.585)); +#215684 = LINE('',#215685,#215686); +#215685 = CARTESIAN_POINT('',(89.101825,-67.885713,1.585)); +#215686 = VECTOR('',#215687,1.); +#215687 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#215688 = ORIENTED_EDGE('',*,*,#215689,.T.); +#215689 = EDGE_CURVE('',#215682,#215690,#215692,.T.); +#215690 = VERTEX_POINT('',#215691); +#215691 = CARTESIAN_POINT('',(88.578553,-67.942661,1.585)); +#215692 = CIRCLE('',#215693,0.461067828848); +#215693 = AXIS2_PLACEMENT_3D('',#215694,#215695,#215696); +#215694 = CARTESIAN_POINT('',(88.810864512688,-67.54439613352,1.585)); +#215695 = DIRECTION('',(-0.,0.,-1.)); +#215696 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#215697 = ORIENTED_EDGE('',*,*,#215698,.T.); +#215698 = EDGE_CURVE('',#215690,#215699,#215701,.T.); +#215699 = VERTEX_POINT('',#215700); +#215700 = CARTESIAN_POINT('',(88.461864,-67.824898,1.585)); +#215701 = LINE('',#215702,#215703); +#215702 = CARTESIAN_POINT('',(88.578553,-67.942661,1.585)); +#215703 = VECTOR('',#215704,1.); +#215704 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#215705 = ORIENTED_EDGE('',*,*,#215706,.T.); +#215706 = EDGE_CURVE('',#215699,#215707,#215709,.T.); +#215707 = VERTEX_POINT('',#215708); +#215708 = CARTESIAN_POINT('',(88.404603,-67.708013,1.585)); +#215709 = LINE('',#215710,#215711); +#215710 = CARTESIAN_POINT('',(88.461864,-67.824898,1.585)); +#215711 = VECTOR('',#215712,1.); +#215712 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#215713 = ORIENTED_EDGE('',*,*,#215714,.T.); +#215714 = EDGE_CURVE('',#215707,#215715,#215717,.T.); +#215715 = VERTEX_POINT('',#215716); +#215716 = CARTESIAN_POINT('',(88.354745,-67.499347,1.585)); +#215717 = LINE('',#215718,#215719); +#215718 = CARTESIAN_POINT('',(88.404603,-67.708013,1.585)); +#215719 = VECTOR('',#215720,1.); +#215720 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#215721 = ORIENTED_EDGE('',*,*,#215722,.T.); +#215722 = EDGE_CURVE('',#215715,#215723,#215725,.T.); +#215723 = VERTEX_POINT('',#215724); +#215724 = CARTESIAN_POINT('',(88.356984,-67.3383,1.585)); +#215725 = LINE('',#215726,#215727); +#215726 = CARTESIAN_POINT('',(88.354745,-67.499347,1.585)); +#215727 = VECTOR('',#215728,1.); +#215728 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#215729 = ORIENTED_EDGE('',*,*,#215730,.T.); +#215730 = EDGE_CURVE('',#215723,#215731,#215733,.T.); +#215731 = VERTEX_POINT('',#215732); +#215732 = CARTESIAN_POINT('',(88.410282,-67.132473,1.585)); +#215733 = LINE('',#215734,#215735); +#215734 = CARTESIAN_POINT('',(88.356984,-67.3383,1.585)); +#215735 = VECTOR('',#215736,1.); +#215736 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#215737 = ORIENTED_EDGE('',*,*,#215738,.T.); +#215738 = EDGE_CURVE('',#215731,#215739,#215741,.T.); +#215739 = VERTEX_POINT('',#215740); +#215740 = CARTESIAN_POINT('',(88.467231,-67.023492,1.585)); +#215741 = LINE('',#215742,#215743); +#215742 = CARTESIAN_POINT('',(88.410282,-67.132473,1.585)); +#215743 = VECTOR('',#215744,1.); +#215744 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#215745 = ORIENTED_EDGE('',*,*,#215746,.T.); +#215746 = EDGE_CURVE('',#215739,#215570,#215747,.T.); +#215747 = LINE('',#215748,#215749); +#215748 = CARTESIAN_POINT('',(88.467231,-67.023492,1.585)); +#215749 = VECTOR('',#215750,1.); +#215750 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#215751 = PLANE('',#215752); +#215752 = AXIS2_PLACEMENT_3D('',#215753,#215754,#215755); +#215753 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215754 = DIRECTION('',(0.,0.,1.)); +#215755 = DIRECTION('',(1.,0.,-0.)); +#215756 = SHELL_BASED_SURFACE_MODEL('',(#215757)); +#215757 = OPEN_SHELL('',(#215758)); +#215758 = ADVANCED_FACE('',(#215759,#215861),#215963,.T.); +#215759 = FACE_BOUND('',#215760,.F.); +#215760 = EDGE_LOOP('',(#215761,#215772,#215780,#215788,#215797,#215805, + #215813,#215822,#215830,#215838,#215847,#215855)); +#215761 = ORIENTED_EDGE('',*,*,#215762,.T.); +#215762 = EDGE_CURVE('',#215763,#215765,#215767,.T.); +#215763 = VERTEX_POINT('',#215764); +#215764 = CARTESIAN_POINT('',(90.485142,-66.91242,1.585)); +#215765 = VERTEX_POINT('',#215766); +#215766 = CARTESIAN_POINT('',(90.85798,-66.917786,1.585)); +#215767 = CIRCLE('',#215768,0.291788488016); +#215768 = AXIS2_PLACEMENT_3D('',#215769,#215770,#215771); +#215769 = CARTESIAN_POINT('',(90.66833086911,-67.13953750256,1.585)); +#215770 = DIRECTION('',(0.,0.,-1.)); +#215771 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#215772 = ORIENTED_EDGE('',*,*,#215773,.T.); +#215773 = EDGE_CURVE('',#215765,#215774,#215776,.T.); +#215774 = VERTEX_POINT('',#215775); +#215775 = CARTESIAN_POINT('',(90.921433,-66.983316,1.585)); +#215776 = LINE('',#215777,#215778); +#215777 = CARTESIAN_POINT('',(90.85798,-66.917786,1.585)); +#215778 = VECTOR('',#215779,1.); +#215779 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#215780 = ORIENTED_EDGE('',*,*,#215781,.T.); +#215781 = EDGE_CURVE('',#215774,#215782,#215784,.T.); +#215782 = VERTEX_POINT('',#215783); +#215783 = CARTESIAN_POINT('',(90.978696,-67.100205,1.585)); +#215784 = LINE('',#215785,#215786); +#215785 = CARTESIAN_POINT('',(90.921433,-66.983316,1.585)); +#215786 = VECTOR('',#215787,1.); +#215787 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#215788 = ORIENTED_EDGE('',*,*,#215789,.T.); +#215789 = EDGE_CURVE('',#215782,#215790,#215792,.T.); +#215790 = VERTEX_POINT('',#215791); +#215791 = CARTESIAN_POINT('',(90.973017,-67.770983,1.585)); +#215792 = CIRCLE('',#215793,0.967158496826); +#215793 = AXIS2_PLACEMENT_3D('',#215794,#215795,#215796); +#215794 = CARTESIAN_POINT('',(90.068749706867,-67.42791417228,1.585)); +#215795 = DIRECTION('',(0.,0.,-1.)); +#215796 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#215797 = ORIENTED_EDGE('',*,*,#215798,.T.); +#215798 = EDGE_CURVE('',#215790,#215799,#215801,.T.); +#215799 = VERTEX_POINT('',#215800); +#215800 = CARTESIAN_POINT('',(90.916067,-67.879963,1.585)); +#215801 = LINE('',#215802,#215803); +#215802 = CARTESIAN_POINT('',(90.973017,-67.770983,1.585)); +#215803 = VECTOR('',#215804,1.); +#215804 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#215805 = ORIENTED_EDGE('',*,*,#215806,.T.); +#215806 = EDGE_CURVE('',#215799,#215807,#215809,.T.); +#215807 = VERTEX_POINT('',#215808); +#215808 = CARTESIAN_POINT('',(90.850537,-67.943417,1.585)); +#215809 = LINE('',#215810,#215811); +#215810 = CARTESIAN_POINT('',(90.916067,-67.879963,1.585)); +#215811 = VECTOR('',#215812,1.); +#215812 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#215813 = ORIENTED_EDGE('',*,*,#215814,.T.); +#215814 = EDGE_CURVE('',#215807,#215815,#215817,.T.); +#215815 = VERTEX_POINT('',#215816); +#215816 = CARTESIAN_POINT('',(90.477698,-67.93805,1.585)); +#215817 = CIRCLE('',#215818,0.290998264264); +#215818 = AXIS2_PLACEMENT_3D('',#215819,#215820,#215821); +#215819 = CARTESIAN_POINT('',(90.667333418158,-67.71732755441,1.585)); +#215820 = DIRECTION('',(-0.,0.,-1.)); +#215821 = DIRECTION('',(0.629569328552,-0.77694430981,-0.)); +#215822 = ORIENTED_EDGE('',*,*,#215823,.T.); +#215823 = EDGE_CURVE('',#215815,#215824,#215826,.T.); +#215824 = VERTEX_POINT('',#215825); +#215825 = CARTESIAN_POINT('',(90.414245,-67.872517,1.585)); +#215826 = LINE('',#215827,#215828); +#215827 = CARTESIAN_POINT('',(90.477698,-67.93805,1.585)); +#215828 = VECTOR('',#215829,1.); +#215829 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#215830 = ORIENTED_EDGE('',*,*,#215831,.T.); +#215831 = EDGE_CURVE('',#215824,#215832,#215834,.T.); +#215832 = VERTEX_POINT('',#215833); +#215833 = CARTESIAN_POINT('',(90.356984,-67.755632,1.585)); +#215834 = LINE('',#215835,#215836); +#215835 = CARTESIAN_POINT('',(90.414245,-67.872517,1.585)); +#215836 = VECTOR('',#215837,1.); +#215837 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#215838 = ORIENTED_EDGE('',*,*,#215839,.T.); +#215839 = EDGE_CURVE('',#215832,#215840,#215842,.T.); +#215840 = VERTEX_POINT('',#215841); +#215841 = CARTESIAN_POINT('',(90.362663,-67.084854,1.585)); +#215842 = CIRCLE('',#215843,0.967158496826); +#215843 = AXIS2_PLACEMENT_3D('',#215844,#215845,#215846); +#215844 = CARTESIAN_POINT('',(91.266930293133,-67.42792282772,1.585)); +#215845 = DIRECTION('',(0.,0.,-1.)); +#215846 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#215847 = ORIENTED_EDGE('',*,*,#215848,.T.); +#215848 = EDGE_CURVE('',#215840,#215849,#215851,.T.); +#215849 = VERTEX_POINT('',#215850); +#215850 = CARTESIAN_POINT('',(90.419612,-66.975873,1.585)); +#215851 = LINE('',#215852,#215853); +#215852 = CARTESIAN_POINT('',(90.362663,-67.084854,1.585)); +#215853 = VECTOR('',#215854,1.); +#215854 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#215855 = ORIENTED_EDGE('',*,*,#215856,.T.); +#215856 = EDGE_CURVE('',#215849,#215763,#215857,.T.); +#215857 = LINE('',#215858,#215859); +#215858 = CARTESIAN_POINT('',(90.419612,-66.975873,1.585)); +#215859 = VECTOR('',#215860,1.); +#215860 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#215861 = FACE_BOUND('',#215862,.F.); +#215862 = EDGE_LOOP('',(#215863,#215874,#215882,#215890,#215899,#215907, + #215915,#215924,#215932,#215940,#215949,#215957)); +#215863 = ORIENTED_EDGE('',*,*,#215864,.T.); +#215864 = EDGE_CURVE('',#215865,#215867,#215869,.T.); +#215865 = VERTEX_POINT('',#215866); +#215866 = CARTESIAN_POINT('',(90.76627,-67.037177,1.585)); +#215867 = VERTEX_POINT('',#215868); +#215868 = CARTESIAN_POINT('',(90.56941,-67.037177,1.585)); +#215869 = CIRCLE('',#215870,0.148516804184); +#215870 = AXIS2_PLACEMENT_3D('',#215871,#215872,#215873); +#215871 = CARTESIAN_POINT('',(90.66784,-67.148392,1.585)); +#215872 = DIRECTION('',(0.,0.,1.)); +#215873 = DIRECTION('',(0.662753286006,0.748837820819,-0.)); +#215874 = ORIENTED_EDGE('',*,*,#215875,.T.); +#215875 = EDGE_CURVE('',#215867,#215876,#215878,.T.); +#215876 = VERTEX_POINT('',#215877); +#215877 = CARTESIAN_POINT('',(90.539003,-67.067584,1.585)); +#215878 = LINE('',#215879,#215880); +#215879 = CARTESIAN_POINT('',(90.56941,-67.037177,1.585)); +#215880 = VECTOR('',#215881,1.); +#215881 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#215882 = ORIENTED_EDGE('',*,*,#215883,.T.); +#215883 = EDGE_CURVE('',#215876,#215884,#215886,.T.); +#215884 = VERTEX_POINT('',#215885); +#215885 = CARTESIAN_POINT('',(90.500509,-67.144571,1.585)); +#215886 = LINE('',#215887,#215888); +#215887 = CARTESIAN_POINT('',(90.539003,-67.067584,1.585)); +#215888 = VECTOR('',#215889,1.); +#215889 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#215890 = ORIENTED_EDGE('',*,*,#215891,.T.); +#215891 = EDGE_CURVE('',#215884,#215892,#215894,.T.); +#215892 = VERTEX_POINT('',#215893); +#215893 = CARTESIAN_POINT('',(90.500509,-67.711266,1.585)); +#215894 = CIRCLE('',#215895,0.815450468384); +#215895 = AXIS2_PLACEMENT_3D('',#215896,#215897,#215898); +#215896 = CARTESIAN_POINT('',(91.265148562559,-67.4279185,1.585)); +#215897 = DIRECTION('',(0.,0.,1.)); +#215898 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#215899 = ORIENTED_EDGE('',*,*,#215900,.T.); +#215900 = EDGE_CURVE('',#215892,#215901,#215903,.T.); +#215901 = VERTEX_POINT('',#215902); +#215902 = CARTESIAN_POINT('',(90.539003,-67.788253,1.585)); +#215903 = LINE('',#215904,#215905); +#215904 = CARTESIAN_POINT('',(90.500509,-67.711266,1.585)); +#215905 = VECTOR('',#215906,1.); +#215906 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#215907 = ORIENTED_EDGE('',*,*,#215908,.T.); +#215908 = EDGE_CURVE('',#215901,#215909,#215911,.T.); +#215909 = VERTEX_POINT('',#215910); +#215910 = CARTESIAN_POINT('',(90.56941,-67.818661,1.585)); +#215911 = LINE('',#215912,#215913); +#215912 = CARTESIAN_POINT('',(90.539003,-67.788253,1.585)); +#215913 = VECTOR('',#215914,1.); +#215914 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#215915 = ORIENTED_EDGE('',*,*,#215916,.T.); +#215916 = EDGE_CURVE('',#215909,#215917,#215919,.T.); +#215917 = VERTEX_POINT('',#215918); +#215918 = CARTESIAN_POINT('',(90.766269,-67.818661,1.585)); +#215919 = CIRCLE('',#215920,0.14851572397); +#215920 = AXIS2_PLACEMENT_3D('',#215921,#215922,#215923); +#215921 = CARTESIAN_POINT('',(90.6678395,-67.707447,1.585)); +#215922 = DIRECTION('',(0.,0.,1.)); +#215923 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#215924 = ORIENTED_EDGE('',*,*,#215925,.T.); +#215925 = EDGE_CURVE('',#215917,#215926,#215928,.T.); +#215926 = VERTEX_POINT('',#215927); +#215927 = CARTESIAN_POINT('',(90.796676,-67.788253,1.585)); +#215928 = LINE('',#215929,#215930); +#215929 = CARTESIAN_POINT('',(90.766269,-67.818661,1.585)); +#215930 = VECTOR('',#215931,1.); +#215931 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#215932 = ORIENTED_EDGE('',*,*,#215933,.T.); +#215933 = EDGE_CURVE('',#215926,#215934,#215936,.T.); +#215934 = VERTEX_POINT('',#215935); +#215935 = CARTESIAN_POINT('',(90.83517,-67.711266,1.585)); +#215936 = LINE('',#215937,#215938); +#215937 = CARTESIAN_POINT('',(90.796676,-67.788253,1.585)); +#215938 = VECTOR('',#215939,1.); +#215939 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#215940 = ORIENTED_EDGE('',*,*,#215941,.T.); +#215941 = EDGE_CURVE('',#215934,#215942,#215944,.T.); +#215942 = VERTEX_POINT('',#215943); +#215943 = CARTESIAN_POINT('',(90.83517,-67.144571,1.585)); +#215944 = CIRCLE('',#215945,0.815433004022); +#215945 = AXIS2_PLACEMENT_3D('',#215946,#215947,#215948); +#215946 = CARTESIAN_POINT('',(90.07054906235,-67.4279185,1.585)); +#215947 = DIRECTION('',(0.,-0.,1.)); +#215948 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#215949 = ORIENTED_EDGE('',*,*,#215950,.T.); +#215950 = EDGE_CURVE('',#215942,#215951,#215953,.T.); +#215951 = VERTEX_POINT('',#215952); +#215952 = CARTESIAN_POINT('',(90.796677,-67.067584,1.585)); +#215953 = LINE('',#215954,#215955); +#215954 = CARTESIAN_POINT('',(90.83517,-67.144571,1.585)); +#215955 = VECTOR('',#215956,1.); +#215956 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#215957 = ORIENTED_EDGE('',*,*,#215958,.T.); +#215958 = EDGE_CURVE('',#215951,#215865,#215959,.T.); +#215959 = LINE('',#215960,#215961); +#215960 = CARTESIAN_POINT('',(90.796677,-67.067584,1.585)); +#215961 = VECTOR('',#215962,1.); +#215962 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#215963 = PLANE('',#215964); +#215964 = AXIS2_PLACEMENT_3D('',#215965,#215966,#215967); +#215965 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215966 = DIRECTION('',(0.,0.,1.)); +#215967 = DIRECTION('',(1.,0.,-0.)); +#215968 = SHELL_BASED_SURFACE_MODEL('',(#215969)); +#215969 = OPEN_SHELL('',(#215970)); +#215970 = ADVANCED_FACE('',(#215971),#216113,.T.); +#215971 = FACE_BOUND('',#215972,.F.); +#215972 = EDGE_LOOP('',(#215973,#215984,#215992,#216001,#216009,#216017, + #216025,#216033,#216041,#216049,#216057,#216065,#216073,#216082, + #216090,#216098,#216107)); +#215973 = ORIENTED_EDGE('',*,*,#215974,.T.); +#215974 = EDGE_CURVE('',#215975,#215977,#215979,.T.); +#215975 = VERTEX_POINT('',#215976); +#215976 = CARTESIAN_POINT('',(166.48165,-62.3131,1.585)); +#215977 = VERTEX_POINT('',#215978); +#215978 = CARTESIAN_POINT('',(166.54165,-62.2531,1.585)); +#215979 = CIRCLE('',#215980,5.999932016262E-02); +#215980 = AXIS2_PLACEMENT_3D('',#215981,#215982,#215983); +#215981 = CARTESIAN_POINT('',(166.54164932015,-62.31309932015,1.585)); +#215982 = DIRECTION('',(0.,0.,-1.)); +#215983 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#215984 = ORIENTED_EDGE('',*,*,#215985,.T.); +#215985 = EDGE_CURVE('',#215977,#215986,#215988,.T.); +#215986 = VERTEX_POINT('',#215987); +#215987 = CARTESIAN_POINT('',(169.84165,-62.2531,1.585)); +#215988 = LINE('',#215989,#215990); +#215989 = CARTESIAN_POINT('',(166.54165,-62.2531,1.585)); +#215990 = VECTOR('',#215991,1.); +#215991 = DIRECTION('',(1.,0.,0.)); +#215992 = ORIENTED_EDGE('',*,*,#215993,.T.); +#215993 = EDGE_CURVE('',#215986,#215994,#215996,.T.); +#215994 = VERTEX_POINT('',#215995); +#215995 = CARTESIAN_POINT('',(169.90165,-62.3131,1.585)); +#215996 = CIRCLE('',#215997,5.999932016256E-02); +#215997 = AXIS2_PLACEMENT_3D('',#215998,#215999,#216000); +#215998 = CARTESIAN_POINT('',(169.84165067984,-62.31309932015,1.585)); +#215999 = DIRECTION('',(0.,0.,-1.)); +#216000 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#216001 = ORIENTED_EDGE('',*,*,#216002,.T.); +#216002 = EDGE_CURVE('',#215994,#216003,#216005,.T.); +#216003 = VERTEX_POINT('',#216004); +#216004 = CARTESIAN_POINT('',(169.90165,-65.467545,1.585)); +#216005 = LINE('',#216006,#216007); +#216006 = CARTESIAN_POINT('',(169.90165,-62.3131,1.585)); +#216007 = VECTOR('',#216008,1.); +#216008 = DIRECTION('',(0.,-1.,0.)); +#216009 = ORIENTED_EDGE('',*,*,#216010,.T.); +#216010 = EDGE_CURVE('',#216003,#216011,#216013,.T.); +#216011 = VERTEX_POINT('',#216012); +#216012 = CARTESIAN_POINT('',(169.860214,-65.450382,1.585)); +#216013 = LINE('',#216014,#216015); +#216014 = CARTESIAN_POINT('',(169.90165,-65.467545,1.585)); +#216015 = VECTOR('',#216016,1.); +#216016 = DIRECTION('',(-0.923882316545,0.382676711045,0.)); +#216017 = ORIENTED_EDGE('',*,*,#216018,.T.); +#216018 = EDGE_CURVE('',#216011,#216019,#216021,.T.); +#216019 = VERTEX_POINT('',#216020); +#216020 = CARTESIAN_POINT('',(169.83095,-65.4475,1.585)); +#216021 = LINE('',#216022,#216023); +#216022 = CARTESIAN_POINT('',(169.860214,-65.450382,1.585)); +#216023 = VECTOR('',#216024,1.); +#216024 = DIRECTION('',(-0.995185563998,9.800863844454E-02,0.)); +#216025 = ORIENTED_EDGE('',*,*,#216026,.T.); +#216026 = EDGE_CURVE('',#216019,#216027,#216029,.T.); +#216027 = VERTEX_POINT('',#216028); +#216028 = CARTESIAN_POINT('',(169.801686,-65.450382,1.585)); +#216029 = LINE('',#216030,#216031); +#216030 = CARTESIAN_POINT('',(169.83095,-65.4475,1.585)); +#216031 = VECTOR('',#216032,1.); +#216032 = DIRECTION('',(-0.995185563998,-9.800863844454E-02,0.)); +#216033 = ORIENTED_EDGE('',*,*,#216034,.T.); +#216034 = EDGE_CURVE('',#216027,#216035,#216037,.T.); +#216035 = VERTEX_POINT('',#216036); +#216036 = CARTESIAN_POINT('',(169.78165,-65.458681,1.585)); +#216037 = LINE('',#216038,#216039); +#216038 = CARTESIAN_POINT('',(169.801686,-65.450382,1.585)); +#216039 = VECTOR('',#216040,1.); +#216040 = DIRECTION('',(-0.923882514837,-0.382676232314,0.)); +#216041 = ORIENTED_EDGE('',*,*,#216042,.T.); +#216042 = EDGE_CURVE('',#216035,#216043,#216045,.T.); +#216043 = VERTEX_POINT('',#216044); +#216044 = CARTESIAN_POINT('',(169.78165,-62.3731,1.585)); +#216045 = LINE('',#216046,#216047); +#216046 = CARTESIAN_POINT('',(169.78165,-65.458681,1.585)); +#216047 = VECTOR('',#216048,1.); +#216048 = DIRECTION('',(0.,1.,0.)); +#216049 = ORIENTED_EDGE('',*,*,#216050,.T.); +#216050 = EDGE_CURVE('',#216043,#216051,#216053,.T.); +#216051 = VERTEX_POINT('',#216052); +#216052 = CARTESIAN_POINT('',(166.60165,-62.3731,1.585)); +#216053 = LINE('',#216054,#216055); +#216054 = CARTESIAN_POINT('',(169.78165,-62.3731,1.585)); +#216055 = VECTOR('',#216056,1.); +#216056 = DIRECTION('',(-1.,0.,0.)); +#216057 = ORIENTED_EDGE('',*,*,#216058,.T.); +#216058 = EDGE_CURVE('',#216051,#216059,#216061,.T.); +#216059 = VERTEX_POINT('',#216060); +#216060 = CARTESIAN_POINT('',(166.60165,-63.698033,1.585)); +#216061 = LINE('',#216062,#216063); +#216062 = CARTESIAN_POINT('',(166.60165,-62.3731,1.585)); +#216063 = VECTOR('',#216064,1.); +#216064 = DIRECTION('',(0.,-1.,0.)); +#216065 = ORIENTED_EDGE('',*,*,#216066,.T.); +#216066 = EDGE_CURVE('',#216059,#216067,#216069,.T.); +#216067 = VERTEX_POINT('',#216068); +#216068 = CARTESIAN_POINT('',(166.600814,-63.69838,1.585)); +#216069 = LINE('',#216070,#216071); +#216070 = CARTESIAN_POINT('',(166.60165,-63.698033,1.585)); +#216071 = VECTOR('',#216072,1.); +#216072 = DIRECTION('',(-0.923599044209,-0.38335989036,0.)); +#216073 = ORIENTED_EDGE('',*,*,#216074,.T.); +#216074 = EDGE_CURVE('',#216067,#216075,#216077,.T.); +#216075 = VERTEX_POINT('',#216076); +#216076 = CARTESIAN_POINT('',(166.600814,-63.94782,1.585)); +#216077 = CIRCLE('',#216078,0.149999366947); +#216078 = AXIS2_PLACEMENT_3D('',#216079,#216080,#216081); +#216079 = CARTESIAN_POINT('',(166.68414905675,-63.8231,1.585)); +#216080 = DIRECTION('',(0.,0.,1.)); +#216081 = DIRECTION('',(-0.555569389738,0.831470175765,0.)); +#216082 = ORIENTED_EDGE('',*,*,#216083,.T.); +#216083 = EDGE_CURVE('',#216075,#216084,#216086,.T.); +#216084 = VERTEX_POINT('',#216085); +#216085 = CARTESIAN_POINT('',(166.60165,-63.948166,1.585)); +#216086 = LINE('',#216087,#216088); +#216087 = CARTESIAN_POINT('',(166.600814,-63.94782,1.585)); +#216088 = VECTOR('',#216089,1.); +#216089 = DIRECTION('',(0.923989900153,-0.382416872555,0.)); +#216090 = ORIENTED_EDGE('',*,*,#216091,.T.); +#216091 = EDGE_CURVE('',#216084,#216092,#216094,.T.); +#216092 = VERTEX_POINT('',#216093); +#216093 = CARTESIAN_POINT('',(166.60165,-67.8231,1.585)); +#216094 = LINE('',#216095,#216096); +#216095 = CARTESIAN_POINT('',(166.60165,-63.948166,1.585)); +#216096 = VECTOR('',#216097,1.); +#216097 = DIRECTION('',(0.,-1.,0.)); +#216098 = ORIENTED_EDGE('',*,*,#216099,.T.); +#216099 = EDGE_CURVE('',#216092,#216100,#216102,.T.); +#216100 = VERTEX_POINT('',#216101); +#216101 = CARTESIAN_POINT('',(166.48165,-67.8231,1.585)); +#216102 = CIRCLE('',#216103,6.000000000042E-02); +#216103 = AXIS2_PLACEMENT_3D('',#216104,#216105,#216106); +#216104 = CARTESIAN_POINT('',(166.54165,-67.82310022558,1.585)); +#216105 = DIRECTION('',(0.,0.,-1.)); +#216106 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#216107 = ORIENTED_EDGE('',*,*,#216108,.T.); +#216108 = EDGE_CURVE('',#216100,#215975,#216109,.T.); +#216109 = LINE('',#216110,#216111); +#216110 = CARTESIAN_POINT('',(166.48165,-67.8231,1.585)); +#216111 = VECTOR('',#216112,1.); +#216112 = DIRECTION('',(0.,1.,0.)); +#216113 = PLANE('',#216114); +#216114 = AXIS2_PLACEMENT_3D('',#216115,#216116,#216117); +#216115 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216116 = DIRECTION('',(0.,0.,1.)); +#216117 = DIRECTION('',(1.,0.,-0.)); +#216118 = SHELL_BASED_SURFACE_MODEL('',(#216119)); +#216119 = OPEN_SHELL('',(#216120)); +#216120 = ADVANCED_FACE('',(#216121),#216180,.T.); +#216121 = FACE_BOUND('',#216122,.F.); +#216122 = EDGE_LOOP('',(#216123,#216133,#216141,#216149,#216158,#216166, + #216174)); +#216123 = ORIENTED_EDGE('',*,*,#216124,.T.); +#216124 = EDGE_CURVE('',#216125,#216127,#216129,.T.); +#216125 = VERTEX_POINT('',#216126); +#216126 = CARTESIAN_POINT('',(169.83095,-65.7475,1.585)); +#216127 = VERTEX_POINT('',#216128); +#216128 = CARTESIAN_POINT('',(169.860214,-65.744618,1.585)); +#216129 = LINE('',#216130,#216131); +#216130 = CARTESIAN_POINT('',(169.83095,-65.7475,1.585)); +#216131 = VECTOR('',#216132,1.); +#216132 = DIRECTION('',(0.995185563998,9.800863844454E-02,0.)); +#216133 = ORIENTED_EDGE('',*,*,#216134,.T.); +#216134 = EDGE_CURVE('',#216127,#216135,#216137,.T.); +#216135 = VERTEX_POINT('',#216136); +#216136 = CARTESIAN_POINT('',(169.90165,-65.727454,1.585)); +#216137 = LINE('',#216138,#216139); +#216138 = CARTESIAN_POINT('',(169.860214,-65.744618,1.585)); +#216139 = VECTOR('',#216140,1.); +#216140 = DIRECTION('',(0.923874433489,0.382695742263,0.)); +#216141 = ORIENTED_EDGE('',*,*,#216142,.T.); +#216142 = EDGE_CURVE('',#216135,#216143,#216145,.T.); +#216143 = VERTEX_POINT('',#216144); +#216144 = CARTESIAN_POINT('',(169.90165,-67.8231,1.585)); +#216145 = LINE('',#216146,#216147); +#216146 = CARTESIAN_POINT('',(169.90165,-65.727454,1.585)); +#216147 = VECTOR('',#216148,1.); +#216148 = DIRECTION('',(0.,-1.,0.)); +#216149 = ORIENTED_EDGE('',*,*,#216150,.T.); +#216150 = EDGE_CURVE('',#216143,#216151,#216153,.T.); +#216151 = VERTEX_POINT('',#216152); +#216152 = CARTESIAN_POINT('',(169.78165,-67.8231,1.585)); +#216153 = CIRCLE('',#216154,6.000000000041E-02); +#216154 = AXIS2_PLACEMENT_3D('',#216155,#216156,#216157); +#216155 = CARTESIAN_POINT('',(169.84165,-67.82310022558,1.585)); +#216156 = DIRECTION('',(0.,0.,-1.)); +#216157 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#216158 = ORIENTED_EDGE('',*,*,#216159,.T.); +#216159 = EDGE_CURVE('',#216151,#216160,#216162,.T.); +#216160 = VERTEX_POINT('',#216161); +#216161 = CARTESIAN_POINT('',(169.78165,-65.736318,1.585)); +#216162 = LINE('',#216163,#216164); +#216163 = CARTESIAN_POINT('',(169.78165,-67.8231,1.585)); +#216164 = VECTOR('',#216165,1.); +#216165 = DIRECTION('',(0.,1.,0.)); +#216166 = ORIENTED_EDGE('',*,*,#216167,.T.); +#216167 = EDGE_CURVE('',#216160,#216168,#216170,.T.); +#216168 = VERTEX_POINT('',#216169); +#216169 = CARTESIAN_POINT('',(169.801686,-65.744618,1.585)); +#216170 = LINE('',#216171,#216172); +#216171 = CARTESIAN_POINT('',(169.78165,-65.736318,1.585)); +#216172 = VECTOR('',#216173,1.); +#216173 = DIRECTION('',(0.923866211796,-0.382715589834,0.)); +#216174 = ORIENTED_EDGE('',*,*,#216175,.T.); +#216175 = EDGE_CURVE('',#216168,#216125,#216176,.T.); +#216176 = LINE('',#216177,#216178); +#216177 = CARTESIAN_POINT('',(169.801686,-65.744618,1.585)); +#216178 = VECTOR('',#216179,1.); +#216179 = DIRECTION('',(0.995185563998,-9.800863844454E-02,0.)); +#216180 = PLANE('',#216181); +#216181 = AXIS2_PLACEMENT_3D('',#216182,#216183,#216184); +#216182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216183 = DIRECTION('',(0.,0.,1.)); +#216184 = DIRECTION('',(1.,0.,-0.)); +#216185 = SHELL_BASED_SURFACE_MODEL('',(#216186)); +#216186 = OPEN_SHELL('',(#216187)); +#216187 = ADVANCED_FACE('',(#216188,#216382,#216416),#216450,.T.); +#216188 = FACE_BOUND('',#216189,.F.); +#216189 = EDGE_LOOP('',(#216190,#216201,#216209,#216217,#216225,#216234, + #216242,#216251,#216259,#216267,#216275,#216284,#216292,#216301, + #216309,#216317,#216326,#216334,#216343,#216351,#216359,#216368, + #216376)); +#216190 = ORIENTED_EDGE('',*,*,#216191,.T.); +#216191 = EDGE_CURVE('',#216192,#216194,#216196,.T.); +#216192 = VERTEX_POINT('',#216193); +#216193 = CARTESIAN_POINT('',(189.990717,-59.525639,1.585)); +#216194 = VERTEX_POINT('',#216195); +#216195 = CARTESIAN_POINT('',(190.10615,-59.5486,1.585)); +#216196 = CIRCLE('',#216197,6.000007318649E-02); +#216197 = AXIS2_PLACEMENT_3D('',#216198,#216199,#216200); +#216198 = CARTESIAN_POINT('',(190.04614992681,-59.54859982331,1.585)); +#216199 = DIRECTION('',(0.,0.,-1.)); +#216200 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#216201 = ORIENTED_EDGE('',*,*,#216202,.T.); +#216202 = EDGE_CURVE('',#216194,#216203,#216205,.T.); +#216203 = VERTEX_POINT('',#216204); +#216204 = CARTESIAN_POINT('',(190.10615,-60.1236,1.585)); +#216205 = LINE('',#216206,#216207); +#216206 = CARTESIAN_POINT('',(190.10615,-59.5486,1.585)); +#216207 = VECTOR('',#216208,1.); +#216208 = DIRECTION('',(0.,-1.,0.)); +#216209 = ORIENTED_EDGE('',*,*,#216210,.T.); +#216210 = EDGE_CURVE('',#216203,#216211,#216213,.T.); +#216211 = VERTEX_POINT('',#216212); +#216212 = CARTESIAN_POINT('',(190.64615,-60.1236,1.585)); +#216213 = LINE('',#216214,#216215); +#216214 = CARTESIAN_POINT('',(190.10615,-60.1236,1.585)); +#216215 = VECTOR('',#216216,1.); +#216216 = DIRECTION('',(1.,0.,0.)); +#216217 = ORIENTED_EDGE('',*,*,#216218,.T.); +#216218 = EDGE_CURVE('',#216211,#216219,#216221,.T.); +#216219 = VERTEX_POINT('',#216220); +#216220 = CARTESIAN_POINT('',(190.64615,-59.6756,1.585)); +#216221 = LINE('',#216222,#216223); +#216222 = CARTESIAN_POINT('',(190.64615,-60.1236,1.585)); +#216223 = VECTOR('',#216224,1.); +#216224 = DIRECTION('',(0.,1.,0.)); +#216225 = ORIENTED_EDGE('',*,*,#216226,.T.); +#216226 = EDGE_CURVE('',#216219,#216227,#216229,.T.); +#216227 = VERTEX_POINT('',#216228); +#216228 = CARTESIAN_POINT('',(190.70615,-59.6156,1.585)); +#216229 = CIRCLE('',#216230,5.999932016253E-02); +#216230 = AXIS2_PLACEMENT_3D('',#216231,#216232,#216233); +#216231 = CARTESIAN_POINT('',(190.70614932015,-59.67559932015,1.585)); +#216232 = DIRECTION('',(0.,0.,-1.)); +#216233 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#216234 = ORIENTED_EDGE('',*,*,#216235,.T.); +#216235 = EDGE_CURVE('',#216227,#216236,#216238,.T.); +#216236 = VERTEX_POINT('',#216237); +#216237 = CARTESIAN_POINT('',(192.61115,-59.6156,1.585)); +#216238 = LINE('',#216239,#216240); +#216239 = CARTESIAN_POINT('',(190.70615,-59.6156,1.585)); +#216240 = VECTOR('',#216241,1.); +#216241 = DIRECTION('',(1.,0.,0.)); +#216242 = ORIENTED_EDGE('',*,*,#216243,.T.); +#216243 = EDGE_CURVE('',#216236,#216244,#216246,.T.); +#216244 = VERTEX_POINT('',#216245); +#216245 = CARTESIAN_POINT('',(192.67115,-59.6756,1.585)); +#216246 = CIRCLE('',#216247,5.999932016261E-02); +#216247 = AXIS2_PLACEMENT_3D('',#216248,#216249,#216250); +#216248 = CARTESIAN_POINT('',(192.61115067984,-59.67559932015,1.585)); +#216249 = DIRECTION('',(0.,0.,-1.)); +#216250 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#216251 = ORIENTED_EDGE('',*,*,#216252,.T.); +#216252 = EDGE_CURVE('',#216244,#216253,#216255,.T.); +#216253 = VERTEX_POINT('',#216254); +#216254 = CARTESIAN_POINT('',(192.67115,-60.1236,1.585)); +#216255 = LINE('',#216256,#216257); +#216256 = CARTESIAN_POINT('',(192.67115,-59.6756,1.585)); +#216257 = VECTOR('',#216258,1.); +#216258 = DIRECTION('',(0.,-1.,0.)); +#216259 = ORIENTED_EDGE('',*,*,#216260,.T.); +#216260 = EDGE_CURVE('',#216253,#216261,#216263,.T.); +#216261 = VERTEX_POINT('',#216262); +#216262 = CARTESIAN_POINT('',(193.18615,-60.1236,1.585)); +#216263 = LINE('',#216264,#216265); +#216264 = CARTESIAN_POINT('',(192.67115,-60.1236,1.585)); +#216265 = VECTOR('',#216266,1.); +#216266 = DIRECTION('',(1.,0.,0.)); +#216267 = ORIENTED_EDGE('',*,*,#216268,.T.); +#216268 = EDGE_CURVE('',#216261,#216269,#216271,.T.); +#216269 = VERTEX_POINT('',#216270); +#216270 = CARTESIAN_POINT('',(193.18615,-59.5486,1.585)); +#216271 = LINE('',#216272,#216273); +#216272 = CARTESIAN_POINT('',(193.18615,-60.1236,1.585)); +#216273 = VECTOR('',#216274,1.); +#216274 = DIRECTION('',(0.,1.,0.)); +#216275 = ORIENTED_EDGE('',*,*,#216276,.T.); +#216276 = EDGE_CURVE('',#216269,#216277,#216279,.T.); +#216277 = VERTEX_POINT('',#216278); +#216278 = CARTESIAN_POINT('',(193.30615,-59.5486,1.585)); +#216279 = CIRCLE('',#216280,6.000000000042E-02); +#216280 = AXIS2_PLACEMENT_3D('',#216281,#216282,#216283); +#216281 = CARTESIAN_POINT('',(193.24615,-59.54859977441,1.585)); +#216282 = DIRECTION('',(0.,0.,-1.)); +#216283 = DIRECTION('',(-0.999999999993,-3.759794253684E-06,-0.)); +#216284 = ORIENTED_EDGE('',*,*,#216285,.T.); +#216285 = EDGE_CURVE('',#216277,#216286,#216288,.T.); +#216286 = VERTEX_POINT('',#216287); +#216287 = CARTESIAN_POINT('',(193.30615,-60.1836,1.585)); +#216288 = LINE('',#216289,#216290); +#216289 = CARTESIAN_POINT('',(193.30615,-59.5486,1.585)); +#216290 = VECTOR('',#216291,1.); +#216291 = DIRECTION('',(0.,-1.,0.)); +#216292 = ORIENTED_EDGE('',*,*,#216293,.T.); +#216293 = EDGE_CURVE('',#216286,#216294,#216296,.T.); +#216294 = VERTEX_POINT('',#216295); +#216295 = CARTESIAN_POINT('',(193.24615,-60.2436,1.585)); +#216296 = CIRCLE('',#216297,5.999932016262E-02); +#216297 = AXIS2_PLACEMENT_3D('',#216298,#216299,#216300); +#216298 = CARTESIAN_POINT('',(193.24615067984,-60.18360067984,1.585)); +#216299 = DIRECTION('',(0.,0.,-1.)); +#216300 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#216301 = ORIENTED_EDGE('',*,*,#216302,.T.); +#216302 = EDGE_CURVE('',#216294,#216303,#216305,.T.); +#216303 = VERTEX_POINT('',#216304); +#216304 = CARTESIAN_POINT('',(192.67115,-60.2436,1.585)); +#216305 = LINE('',#216306,#216307); +#216306 = CARTESIAN_POINT('',(193.24615,-60.2436,1.585)); +#216307 = VECTOR('',#216308,1.); +#216308 = DIRECTION('',(-1.,0.,0.)); +#216309 = ORIENTED_EDGE('',*,*,#216310,.T.); +#216310 = EDGE_CURVE('',#216303,#216311,#216313,.T.); +#216311 = VERTEX_POINT('',#216312); +#216312 = CARTESIAN_POINT('',(192.67115,-60.6916,1.585)); +#216313 = LINE('',#216314,#216315); +#216314 = CARTESIAN_POINT('',(192.67115,-60.2436,1.585)); +#216315 = VECTOR('',#216316,1.); +#216316 = DIRECTION('',(0.,-1.,0.)); +#216317 = ORIENTED_EDGE('',*,*,#216318,.T.); +#216318 = EDGE_CURVE('',#216311,#216319,#216321,.T.); +#216319 = VERTEX_POINT('',#216320); +#216320 = CARTESIAN_POINT('',(192.61115,-60.7516,1.585)); +#216321 = CIRCLE('',#216322,5.999932016262E-02); +#216322 = AXIS2_PLACEMENT_3D('',#216323,#216324,#216325); +#216323 = CARTESIAN_POINT('',(192.61115067984,-60.69160067984,1.585)); +#216324 = DIRECTION('',(0.,0.,-1.)); +#216325 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#216326 = ORIENTED_EDGE('',*,*,#216327,.T.); +#216327 = EDGE_CURVE('',#216319,#216328,#216330,.T.); +#216328 = VERTEX_POINT('',#216329); +#216329 = CARTESIAN_POINT('',(190.70615,-60.7516,1.585)); +#216330 = LINE('',#216331,#216332); +#216331 = CARTESIAN_POINT('',(192.61115,-60.7516,1.585)); +#216332 = VECTOR('',#216333,1.); +#216333 = DIRECTION('',(-1.,0.,0.)); +#216334 = ORIENTED_EDGE('',*,*,#216335,.T.); +#216335 = EDGE_CURVE('',#216328,#216336,#216338,.T.); +#216336 = VERTEX_POINT('',#216337); +#216337 = CARTESIAN_POINT('',(190.64615,-60.6916,1.585)); +#216338 = CIRCLE('',#216339,5.999932016259E-02); +#216339 = AXIS2_PLACEMENT_3D('',#216340,#216341,#216342); +#216340 = CARTESIAN_POINT('',(190.70614932015,-60.69160067984,1.585)); +#216341 = DIRECTION('',(0.,0.,-1.)); +#216342 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#216343 = ORIENTED_EDGE('',*,*,#216344,.T.); +#216344 = EDGE_CURVE('',#216336,#216345,#216347,.T.); +#216345 = VERTEX_POINT('',#216346); +#216346 = CARTESIAN_POINT('',(190.64615,-60.2436,1.585)); +#216347 = LINE('',#216348,#216349); +#216348 = CARTESIAN_POINT('',(190.64615,-60.6916,1.585)); +#216349 = VECTOR('',#216350,1.); +#216350 = DIRECTION('',(0.,1.,0.)); +#216351 = ORIENTED_EDGE('',*,*,#216352,.T.); +#216352 = EDGE_CURVE('',#216345,#216353,#216355,.T.); +#216353 = VERTEX_POINT('',#216354); +#216354 = CARTESIAN_POINT('',(190.04615,-60.2436,1.585)); +#216355 = LINE('',#216356,#216357); +#216356 = CARTESIAN_POINT('',(190.64615,-60.2436,1.585)); +#216357 = VECTOR('',#216358,1.); +#216358 = DIRECTION('',(-1.,0.,0.)); +#216359 = ORIENTED_EDGE('',*,*,#216360,.T.); +#216360 = EDGE_CURVE('',#216353,#216361,#216363,.T.); +#216361 = VERTEX_POINT('',#216362); +#216362 = CARTESIAN_POINT('',(189.98615,-60.1836,1.585)); +#216363 = CIRCLE('',#216364,5.999932016259E-02); +#216364 = AXIS2_PLACEMENT_3D('',#216365,#216366,#216367); +#216365 = CARTESIAN_POINT('',(190.04614932015,-60.18360067984,1.585)); +#216366 = DIRECTION('',(0.,0.,-1.)); +#216367 = DIRECTION('',(1.133081612142E-05,-0.999999999936,0.)); +#216368 = ORIENTED_EDGE('',*,*,#216369,.T.); +#216369 = EDGE_CURVE('',#216361,#216370,#216372,.T.); +#216370 = VERTEX_POINT('',#216371); +#216371 = CARTESIAN_POINT('',(189.98615,-59.5486,1.585)); +#216372 = LINE('',#216373,#216374); +#216373 = CARTESIAN_POINT('',(189.98615,-60.1836,1.585)); +#216374 = VECTOR('',#216375,1.); +#216375 = DIRECTION('',(0.,1.,0.)); +#216376 = ORIENTED_EDGE('',*,*,#216377,.T.); +#216377 = EDGE_CURVE('',#216370,#216192,#216378,.T.); +#216378 = LINE('',#216379,#216380); +#216379 = CARTESIAN_POINT('',(189.98615,-59.5486,1.585)); +#216380 = VECTOR('',#216381,1.); +#216381 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#216382 = FACE_BOUND('',#216383,.F.); +#216383 = EDGE_LOOP('',(#216384,#216394,#216402,#216410)); +#216384 = ORIENTED_EDGE('',*,*,#216385,.T.); +#216385 = EDGE_CURVE('',#216386,#216388,#216390,.T.); +#216386 = VERTEX_POINT('',#216387); +#216387 = CARTESIAN_POINT('',(191.561895,-60.6316,1.585)); +#216388 = VERTEX_POINT('',#216389); +#216389 = CARTESIAN_POINT('',(192.121895,-59.7356,1.585)); +#216390 = LINE('',#216391,#216392); +#216391 = CARTESIAN_POINT('',(191.561895,-60.6316,1.585)); +#216392 = VECTOR('',#216393,1.); +#216393 = DIRECTION('',(0.529998940003,0.847998304005,0.)); +#216394 = ORIENTED_EDGE('',*,*,#216395,.T.); +#216395 = EDGE_CURVE('',#216388,#216396,#216398,.T.); +#216396 = VERTEX_POINT('',#216397); +#216397 = CARTESIAN_POINT('',(190.76615,-59.7356,1.585)); +#216398 = LINE('',#216399,#216400); +#216399 = CARTESIAN_POINT('',(192.121895,-59.7356,1.585)); +#216400 = VECTOR('',#216401,1.); +#216401 = DIRECTION('',(-1.,0.,0.)); +#216402 = ORIENTED_EDGE('',*,*,#216403,.T.); +#216403 = EDGE_CURVE('',#216396,#216404,#216406,.T.); +#216404 = VERTEX_POINT('',#216405); +#216405 = CARTESIAN_POINT('',(190.76615,-60.6316,1.585)); +#216406 = LINE('',#216407,#216408); +#216407 = CARTESIAN_POINT('',(190.76615,-59.7356,1.585)); +#216408 = VECTOR('',#216409,1.); +#216409 = DIRECTION('',(0.,-1.,0.)); +#216410 = ORIENTED_EDGE('',*,*,#216411,.T.); +#216411 = EDGE_CURVE('',#216404,#216386,#216412,.T.); +#216412 = LINE('',#216413,#216414); +#216413 = CARTESIAN_POINT('',(190.76615,-60.6316,1.585)); +#216414 = VECTOR('',#216415,1.); +#216415 = DIRECTION('',(1.,0.,0.)); +#216416 = FACE_BOUND('',#216417,.F.); +#216417 = EDGE_LOOP('',(#216418,#216428,#216436,#216444)); +#216418 = ORIENTED_EDGE('',*,*,#216419,.T.); +#216419 = EDGE_CURVE('',#216420,#216422,#216424,.T.); +#216420 = VERTEX_POINT('',#216421); +#216421 = CARTESIAN_POINT('',(192.55115,-60.6316,1.585)); +#216422 = VERTEX_POINT('',#216423); +#216423 = CARTESIAN_POINT('',(192.55115,-59.7356,1.585)); +#216424 = LINE('',#216425,#216426); +#216425 = CARTESIAN_POINT('',(192.55115,-60.6316,1.585)); +#216426 = VECTOR('',#216427,1.); +#216427 = DIRECTION('',(0.,1.,0.)); +#216428 = ORIENTED_EDGE('',*,*,#216429,.T.); +#216429 = EDGE_CURVE('',#216422,#216430,#216432,.T.); +#216430 = VERTEX_POINT('',#216431); +#216431 = CARTESIAN_POINT('',(192.263405,-59.7356,1.585)); +#216432 = LINE('',#216433,#216434); +#216433 = CARTESIAN_POINT('',(192.55115,-59.7356,1.585)); +#216434 = VECTOR('',#216435,1.); +#216435 = DIRECTION('',(-1.,0.,0.)); +#216436 = ORIENTED_EDGE('',*,*,#216437,.T.); +#216437 = EDGE_CURVE('',#216430,#216438,#216440,.T.); +#216438 = VERTEX_POINT('',#216439); +#216439 = CARTESIAN_POINT('',(191.703405,-60.6316,1.585)); +#216440 = LINE('',#216441,#216442); +#216441 = CARTESIAN_POINT('',(192.263405,-59.7356,1.585)); +#216442 = VECTOR('',#216443,1.); +#216443 = DIRECTION('',(-0.529998940003,-0.847998304005,0.)); +#216444 = ORIENTED_EDGE('',*,*,#216445,.T.); +#216445 = EDGE_CURVE('',#216438,#216420,#216446,.T.); +#216446 = LINE('',#216447,#216448); +#216447 = CARTESIAN_POINT('',(191.703405,-60.6316,1.585)); +#216448 = VECTOR('',#216449,1.); +#216449 = DIRECTION('',(1.,0.,0.)); +#216450 = PLANE('',#216451); +#216451 = AXIS2_PLACEMENT_3D('',#216452,#216453,#216454); +#216452 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216453 = DIRECTION('',(0.,0.,1.)); +#216454 = DIRECTION('',(1.,0.,-0.)); +#216455 = SHELL_BASED_SURFACE_MODEL('',(#216456)); +#216456 = OPEN_SHELL('',(#216457)); +#216457 = ADVANCED_FACE('',(#216458,#216528),#216562,.T.); +#216458 = FACE_BOUND('',#216459,.F.); +#216459 = EDGE_LOOP('',(#216460,#216471,#216479,#216488,#216496,#216505, + #216513,#216522)); +#216460 = ORIENTED_EDGE('',*,*,#216461,.T.); +#216461 = EDGE_CURVE('',#216462,#216464,#216466,.T.); +#216462 = VERTEX_POINT('',#216463); +#216463 = CARTESIAN_POINT('',(187.82415,-54.5656,1.585)); +#216464 = VERTEX_POINT('',#216465); +#216465 = CARTESIAN_POINT('',(187.88415,-54.5056,1.585)); +#216466 = CIRCLE('',#216467,5.999932016262E-02); +#216467 = AXIS2_PLACEMENT_3D('',#216468,#216469,#216470); +#216468 = CARTESIAN_POINT('',(187.88414932015,-54.56559932015,1.585)); +#216469 = DIRECTION('',(0.,0.,-1.)); +#216470 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#216471 = ORIENTED_EDGE('',*,*,#216472,.T.); +#216472 = EDGE_CURVE('',#216464,#216473,#216475,.T.); +#216473 = VERTEX_POINT('',#216474); +#216474 = CARTESIAN_POINT('',(195.68415,-54.5056,1.585)); +#216475 = LINE('',#216476,#216477); +#216476 = CARTESIAN_POINT('',(187.88415,-54.5056,1.585)); +#216477 = VECTOR('',#216478,1.); +#216478 = DIRECTION('',(1.,0.,0.)); +#216479 = ORIENTED_EDGE('',*,*,#216480,.T.); +#216480 = EDGE_CURVE('',#216473,#216481,#216483,.T.); +#216481 = VERTEX_POINT('',#216482); +#216482 = CARTESIAN_POINT('',(195.74415,-54.5656,1.585)); +#216483 = CIRCLE('',#216484,5.999932016259E-02); +#216484 = AXIS2_PLACEMENT_3D('',#216485,#216486,#216487); +#216485 = CARTESIAN_POINT('',(195.68415067984,-54.56559932015,1.585)); +#216486 = DIRECTION('',(0.,0.,-1.)); +#216487 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#216488 = ORIENTED_EDGE('',*,*,#216489,.T.); +#216489 = EDGE_CURVE('',#216481,#216490,#216492,.T.); +#216490 = VERTEX_POINT('',#216491); +#216491 = CARTESIAN_POINT('',(195.74415,-67.2656,1.585)); +#216492 = LINE('',#216493,#216494); +#216493 = CARTESIAN_POINT('',(195.74415,-54.5656,1.585)); +#216494 = VECTOR('',#216495,1.); +#216495 = DIRECTION('',(0.,-1.,0.)); +#216496 = ORIENTED_EDGE('',*,*,#216497,.T.); +#216497 = EDGE_CURVE('',#216490,#216498,#216500,.T.); +#216498 = VERTEX_POINT('',#216499); +#216499 = CARTESIAN_POINT('',(195.68415,-67.3256,1.585)); +#216500 = CIRCLE('',#216501,5.999932016253E-02); +#216501 = AXIS2_PLACEMENT_3D('',#216502,#216503,#216504); +#216502 = CARTESIAN_POINT('',(195.68415067984,-67.26560067984,1.585)); +#216503 = DIRECTION('',(0.,0.,-1.)); +#216504 = DIRECTION('',(0.999999999936,1.133081683199E-05,0.)); +#216505 = ORIENTED_EDGE('',*,*,#216506,.T.); +#216506 = EDGE_CURVE('',#216498,#216507,#216509,.T.); +#216507 = VERTEX_POINT('',#216508); +#216508 = CARTESIAN_POINT('',(187.88415,-67.3256,1.585)); +#216509 = LINE('',#216510,#216511); +#216510 = CARTESIAN_POINT('',(195.68415,-67.3256,1.585)); +#216511 = VECTOR('',#216512,1.); +#216512 = DIRECTION('',(-1.,0.,0.)); +#216513 = ORIENTED_EDGE('',*,*,#216514,.T.); +#216514 = EDGE_CURVE('',#216507,#216515,#216517,.T.); +#216515 = VERTEX_POINT('',#216516); +#216516 = CARTESIAN_POINT('',(187.82415,-67.2656,1.585)); +#216517 = CIRCLE('',#216518,5.999932016257E-02); +#216518 = AXIS2_PLACEMENT_3D('',#216519,#216520,#216521); +#216519 = CARTESIAN_POINT('',(187.88414932015,-67.26560067984,1.585)); +#216520 = DIRECTION('',(0.,0.,-1.)); +#216521 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#216522 = ORIENTED_EDGE('',*,*,#216523,.T.); +#216523 = EDGE_CURVE('',#216515,#216462,#216524,.T.); +#216524 = LINE('',#216525,#216526); +#216525 = CARTESIAN_POINT('',(187.82415,-67.2656,1.585)); +#216526 = VECTOR('',#216527,1.); +#216527 = DIRECTION('',(0.,1.,0.)); +#216528 = FACE_BOUND('',#216529,.F.); +#216529 = EDGE_LOOP('',(#216530,#216540,#216548,#216556)); +#216530 = ORIENTED_EDGE('',*,*,#216531,.T.); +#216531 = EDGE_CURVE('',#216532,#216534,#216536,.T.); +#216532 = VERTEX_POINT('',#216533); +#216533 = CARTESIAN_POINT('',(195.62415,-67.2056,1.585)); +#216534 = VERTEX_POINT('',#216535); +#216535 = CARTESIAN_POINT('',(195.62415,-54.6256,1.585)); +#216536 = LINE('',#216537,#216538); +#216537 = CARTESIAN_POINT('',(195.62415,-67.2056,1.585)); +#216538 = VECTOR('',#216539,1.); +#216539 = DIRECTION('',(0.,1.,0.)); +#216540 = ORIENTED_EDGE('',*,*,#216541,.T.); +#216541 = EDGE_CURVE('',#216534,#216542,#216544,.T.); +#216542 = VERTEX_POINT('',#216543); +#216543 = CARTESIAN_POINT('',(187.94415,-54.6256,1.585)); +#216544 = LINE('',#216545,#216546); +#216545 = CARTESIAN_POINT('',(195.62415,-54.6256,1.585)); +#216546 = VECTOR('',#216547,1.); +#216547 = DIRECTION('',(-1.,0.,0.)); +#216548 = ORIENTED_EDGE('',*,*,#216549,.T.); +#216549 = EDGE_CURVE('',#216542,#216550,#216552,.T.); +#216550 = VERTEX_POINT('',#216551); +#216551 = CARTESIAN_POINT('',(187.94415,-67.2056,1.585)); +#216552 = LINE('',#216553,#216554); +#216553 = CARTESIAN_POINT('',(187.94415,-54.6256,1.585)); +#216554 = VECTOR('',#216555,1.); +#216555 = DIRECTION('',(0.,-1.,0.)); +#216556 = ORIENTED_EDGE('',*,*,#216557,.T.); +#216557 = EDGE_CURVE('',#216550,#216532,#216558,.T.); +#216558 = LINE('',#216559,#216560); +#216559 = CARTESIAN_POINT('',(187.94415,-67.2056,1.585)); +#216560 = VECTOR('',#216561,1.); +#216561 = DIRECTION('',(1.,0.,0.)); +#216562 = PLANE('',#216563); +#216563 = AXIS2_PLACEMENT_3D('',#216564,#216565,#216566); +#216564 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216565 = DIRECTION('',(0.,0.,1.)); +#216566 = DIRECTION('',(1.,0.,-0.)); +#216567 = SHELL_BASED_SURFACE_MODEL('',(#216568)); +#216568 = OPEN_SHELL('',(#216569)); +#216569 = ADVANCED_FACE('',(#216570,#216671),#216746,.T.); +#216570 = FACE_BOUND('',#216571,.F.); +#216571 = EDGE_LOOP('',(#216572,#216583,#216591,#216599,#216607,#216615, + #216623,#216632,#216640,#216649,#216657,#216665)); +#216572 = ORIENTED_EDGE('',*,*,#216573,.T.); +#216573 = EDGE_CURVE('',#216574,#216576,#216578,.T.); +#216574 = VERTEX_POINT('',#216575); +#216575 = CARTESIAN_POINT('',(170.24949,-66.402837,1.585)); +#216576 = VERTEX_POINT('',#216577); +#216577 = CARTESIAN_POINT('',(170.72045,-66.29597,1.585)); +#216578 = CIRCLE('',#216579,0.768531889865); +#216579 = AXIS2_PLACEMENT_3D('',#216580,#216581,#216582); +#216580 = CARTESIAN_POINT('',(170.64642434751,-67.06092847502,1.585)); +#216581 = DIRECTION('',(0.,0.,-1.)); +#216582 = DIRECTION('',(-0.516483899693,0.856296900238,0.)); +#216583 = ORIENTED_EDGE('',*,*,#216584,.T.); +#216584 = EDGE_CURVE('',#216576,#216585,#216587,.T.); +#216585 = VERTEX_POINT('',#216586); +#216586 = CARTESIAN_POINT('',(170.941914,-66.351256,1.585)); +#216587 = LINE('',#216588,#216589); +#216588 = CARTESIAN_POINT('',(170.72045,-66.29597,1.585)); +#216589 = VECTOR('',#216590,1.); +#216590 = DIRECTION('',(0.970224909195,-0.242205750505,0.)); +#216591 = ORIENTED_EDGE('',*,*,#216592,.T.); +#216592 = EDGE_CURVE('',#216585,#216593,#216595,.T.); +#216593 = VERTEX_POINT('',#216594); +#216594 = CARTESIAN_POINT('',(171.050894,-66.408205,1.585)); +#216595 = LINE('',#216596,#216597); +#216596 = CARTESIAN_POINT('',(170.941914,-66.351256,1.585)); +#216597 = VECTOR('',#216598,1.); +#216598 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#216599 = ORIENTED_EDGE('',*,*,#216600,.T.); +#216600 = EDGE_CURVE('',#216593,#216601,#216603,.T.); +#216601 = VERTEX_POINT('',#216602); +#216602 = CARTESIAN_POINT('',(171.164007,-66.524052,1.585)); +#216603 = LINE('',#216604,#216605); +#216604 = CARTESIAN_POINT('',(171.050894,-66.408205,1.585)); +#216605 = VECTOR('',#216606,1.); +#216606 = DIRECTION('',(0.698613449619,-0.715499299798,0.)); +#216607 = ORIENTED_EDGE('',*,*,#216608,.T.); +#216608 = EDGE_CURVE('',#216601,#216609,#216611,.T.); +#216609 = VERTEX_POINT('',#216610); +#216610 = CARTESIAN_POINT('',(171.220739,-66.696645,1.585)); +#216611 = LINE('',#216612,#216613); +#216612 = CARTESIAN_POINT('',(171.164007,-66.524052,1.585)); +#216613 = VECTOR('',#216614,1.); +#216614 = DIRECTION('',(0.312266910039,-0.949994408876,0.)); +#216615 = ORIENTED_EDGE('',*,*,#216616,.T.); +#216616 = EDGE_CURVE('',#216609,#216617,#216619,.T.); +#216617 = VERTEX_POINT('',#216618); +#216618 = CARTESIAN_POINT('',(171.220028,-66.956779,1.585)); +#216619 = LINE('',#216620,#216621); +#216620 = CARTESIAN_POINT('',(171.220739,-66.696645,1.585)); +#216621 = VECTOR('',#216622,1.); +#216622 = DIRECTION('',(-2.733196522855E-03,-0.999996264811,0.)); +#216623 = ORIENTED_EDGE('',*,*,#216624,.T.); +#216624 = EDGE_CURVE('',#216617,#216625,#216627,.T.); +#216625 = VERTEX_POINT('',#216626); +#216626 = CARTESIAN_POINT('',(171.146469,-67.017147,1.585)); +#216627 = CIRCLE('',#216628,7.500074938985E-02); +#216628 = AXIS2_PLACEMENT_3D('',#216629,#216630,#216631); +#216629 = CARTESIAN_POINT('',(171.14646853389,-66.94214625061,1.585)); +#216630 = DIRECTION('',(0.,0.,-1.)); +#216631 = DIRECTION('',(0.980783081614,-0.195101375752,0.)); +#216632 = ORIENTED_EDGE('',*,*,#216633,.T.); +#216633 = EDGE_CURVE('',#216625,#216634,#216636,.T.); +#216634 = VERTEX_POINT('',#216635); +#216635 = CARTESIAN_POINT('',(170.131837,-67.015706,1.585)); +#216636 = LINE('',#216637,#216638); +#216637 = CARTESIAN_POINT('',(171.146469,-67.017147,1.585)); +#216638 = VECTOR('',#216639,1.); +#216639 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#216640 = ORIENTED_EDGE('',*,*,#216641,.T.); +#216641 = EDGE_CURVE('',#216634,#216642,#216644,.T.); +#216642 = VERTEX_POINT('',#216643); +#216643 = CARTESIAN_POINT('',(170.071469,-66.942147,1.585)); +#216644 = CIRCLE('',#216645,7.500074938982E-02); +#216645 = AXIS2_PLACEMENT_3D('',#216646,#216647,#216648); +#216646 = CARTESIAN_POINT('',(170.14646974938,-66.94214653389,1.585)); +#216647 = DIRECTION('',(0.,0.,-1.)); +#216648 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#216649 = ORIENTED_EDGE('',*,*,#216650,.T.); +#216650 = EDGE_CURVE('',#216642,#216651,#216653,.T.); +#216651 = VERTEX_POINT('',#216652); +#216652 = CARTESIAN_POINT('',(170.073668,-66.687588,1.585)); +#216653 = LINE('',#216654,#216655); +#216654 = CARTESIAN_POINT('',(170.071469,-66.942147,1.585)); +#216655 = VECTOR('',#216656,1.); +#216656 = DIRECTION('',(8.638146584621E-03,0.999962690516,0.)); +#216657 = ORIENTED_EDGE('',*,*,#216658,.T.); +#216658 = EDGE_CURVE('',#216651,#216659,#216661,.T.); +#216659 = VERTEX_POINT('',#216660); +#216660 = CARTESIAN_POINT('',(170.131728,-66.519527,1.585)); +#216661 = LINE('',#216662,#216663); +#216662 = CARTESIAN_POINT('',(170.073668,-66.687588,1.585)); +#216663 = VECTOR('',#216664,1.); +#216664 = DIRECTION('',(0.326533133634,0.945185755626,0.)); +#216665 = ORIENTED_EDGE('',*,*,#216666,.T.); +#216666 = EDGE_CURVE('',#216659,#216574,#216667,.T.); +#216667 = LINE('',#216668,#216669); +#216668 = CARTESIAN_POINT('',(170.131728,-66.519527,1.585)); +#216669 = VECTOR('',#216670,1.); +#216670 = DIRECTION('',(0.710332505875,0.70386627359,0.)); +#216671 = FACE_BOUND('',#216672,.F.); +#216672 = EDGE_LOOP('',(#216673,#216684,#216692,#216700,#216708,#216716, + #216724,#216732,#216740)); +#216673 = ORIENTED_EDGE('',*,*,#216674,.T.); +#216674 = EDGE_CURVE('',#216675,#216677,#216679,.T.); +#216675 = VERTEX_POINT('',#216676); +#216676 = CARTESIAN_POINT('',(170.882197,-66.489102,1.585)); +#216677 = VERTEX_POINT('',#216678); +#216678 = CARTESIAN_POINT('',(170.333753,-66.527596,1.585)); +#216679 = CIRCLE('',#216680,0.618603201895); +#216680 = AXIS2_PLACEMENT_3D('',#216681,#216682,#216683); +#216681 = CARTESIAN_POINT('',(170.646775275,-67.06115665892,1.585)); +#216682 = DIRECTION('',(0.,0.,1.)); +#216683 = DIRECTION('',(0.380569845546,0.924752179052,-0.)); +#216684 = ORIENTED_EDGE('',*,*,#216685,.T.); +#216685 = EDGE_CURVE('',#216677,#216686,#216688,.T.); +#216686 = VERTEX_POINT('',#216687); +#216687 = CARTESIAN_POINT('',(170.25964,-66.601708,1.585)); +#216688 = LINE('',#216689,#216690); +#216689 = CARTESIAN_POINT('',(170.333753,-66.527596,1.585)); +#216690 = VECTOR('',#216691,1.); +#216691 = DIRECTION('',(-0.707111551667,-0.707102010674,0.)); +#216692 = ORIENTED_EDGE('',*,*,#216693,.T.); +#216693 = EDGE_CURVE('',#216686,#216694,#216696,.T.); +#216694 = VERTEX_POINT('',#216695); +#216695 = CARTESIAN_POINT('',(170.221469,-66.716222,1.585)); +#216696 = LINE('',#216697,#216698); +#216697 = CARTESIAN_POINT('',(170.25964,-66.601708,1.585)); +#216698 = VECTOR('',#216699,1.); +#216699 = DIRECTION('',(-0.316225280684,-0.948684126491,0.)); +#216700 = ORIENTED_EDGE('',*,*,#216701,.T.); +#216701 = EDGE_CURVE('',#216694,#216702,#216704,.T.); +#216702 = VERTEX_POINT('',#216703); +#216703 = CARTESIAN_POINT('',(170.221469,-66.867147,1.585)); +#216704 = LINE('',#216705,#216706); +#216705 = CARTESIAN_POINT('',(170.221469,-66.716222,1.585)); +#216706 = VECTOR('',#216707,1.); +#216707 = DIRECTION('',(0.,-1.,0.)); +#216708 = ORIENTED_EDGE('',*,*,#216709,.T.); +#216709 = EDGE_CURVE('',#216702,#216710,#216712,.T.); +#216710 = VERTEX_POINT('',#216711); +#216711 = CARTESIAN_POINT('',(171.071469,-66.867147,1.585)); +#216712 = LINE('',#216713,#216714); +#216713 = CARTESIAN_POINT('',(170.221469,-66.867147,1.585)); +#216714 = VECTOR('',#216715,1.); +#216715 = DIRECTION('',(1.,0.,0.)); +#216716 = ORIENTED_EDGE('',*,*,#216717,.T.); +#216717 = EDGE_CURVE('',#216710,#216718,#216720,.T.); +#216718 = VERTEX_POINT('',#216719); +#216719 = CARTESIAN_POINT('',(171.071469,-66.716222,1.585)); +#216720 = LINE('',#216721,#216722); +#216721 = CARTESIAN_POINT('',(171.071469,-66.867147,1.585)); +#216722 = VECTOR('',#216723,1.); +#216723 = DIRECTION('',(0.,1.,0.)); +#216724 = ORIENTED_EDGE('',*,*,#216725,.T.); +#216725 = EDGE_CURVE('',#216718,#216726,#216728,.T.); +#216726 = VERTEX_POINT('',#216727); +#216727 = CARTESIAN_POINT('',(171.033298,-66.601709,1.585)); +#216728 = LINE('',#216729,#216730); +#216729 = CARTESIAN_POINT('',(171.071469,-66.716222,1.585)); +#216730 = VECTOR('',#216731,1.); +#216731 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#216732 = ORIENTED_EDGE('',*,*,#216733,.T.); +#216733 = EDGE_CURVE('',#216726,#216734,#216736,.T.); +#216734 = VERTEX_POINT('',#216735); +#216735 = CARTESIAN_POINT('',(170.959184,-66.527596,1.585)); +#216736 = LINE('',#216737,#216738); +#216737 = CARTESIAN_POINT('',(171.033298,-66.601709,1.585)); +#216738 = VECTOR('',#216739,1.); +#216739 = DIRECTION('',(-0.707111551602,0.707102010739,0.)); +#216740 = ORIENTED_EDGE('',*,*,#216741,.T.); +#216741 = EDGE_CURVE('',#216734,#216675,#216742,.T.); +#216742 = LINE('',#216743,#216744); +#216743 = CARTESIAN_POINT('',(170.959184,-66.527596,1.585)); +#216744 = VECTOR('',#216745,1.); +#216745 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#216746 = PLANE('',#216747); +#216747 = AXIS2_PLACEMENT_3D('',#216748,#216749,#216750); +#216748 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216749 = DIRECTION('',(0.,0.,1.)); +#216750 = DIRECTION('',(1.,0.,-0.)); +#216751 = SHELL_BASED_SURFACE_MODEL('',(#216752)); +#216752 = OPEN_SHELL('',(#216753)); +#216753 = ADVANCED_FACE('',(#216754),#217104,.T.); +#216754 = FACE_BOUND('',#216755,.F.); +#216755 = EDGE_LOOP('',(#216756,#216766,#216774,#216782,#216790,#216798, + #216807,#216815,#216823,#216832,#216840,#216848,#216856,#216864, + #216872,#216880,#216888,#216896,#216904,#216912,#216920,#216928, + #216936,#216944,#216952,#216960,#216968,#216977,#216985,#216993, + #217002,#217010,#217018,#217026,#217034,#217042,#217050,#217058, + #217066,#217074,#217082,#217090,#217098)); +#216756 = ORIENTED_EDGE('',*,*,#216757,.T.); +#216757 = EDGE_CURVE('',#216758,#216760,#216762,.T.); +#216758 = VERTEX_POINT('',#216759); +#216759 = CARTESIAN_POINT('',(109.186488,-64.724595,1.585)); +#216760 = VERTEX_POINT('',#216761); +#216761 = CARTESIAN_POINT('',(109.394347,-64.622253,1.585)); +#216762 = LINE('',#216763,#216764); +#216763 = CARTESIAN_POINT('',(109.186488,-64.724595,1.585)); +#216764 = VECTOR('',#216765,1.); +#216765 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#216766 = ORIENTED_EDGE('',*,*,#216767,.T.); +#216767 = EDGE_CURVE('',#216760,#216768,#216770,.T.); +#216768 = VERTEX_POINT('',#216769); +#216769 = CARTESIAN_POINT('',(109.427363,-64.617814,1.585)); +#216770 = LINE('',#216771,#216772); +#216771 = CARTESIAN_POINT('',(109.394347,-64.622253,1.585)); +#216772 = VECTOR('',#216773,1.); +#216773 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#216774 = ORIENTED_EDGE('',*,*,#216775,.T.); +#216775 = EDGE_CURVE('',#216768,#216776,#216778,.T.); +#216776 = VERTEX_POINT('',#216777); +#216777 = CARTESIAN_POINT('',(109.868277,-64.619029,1.585)); +#216778 = LINE('',#216779,#216780); +#216779 = CARTESIAN_POINT('',(109.427363,-64.617814,1.585)); +#216780 = VECTOR('',#216781,1.); +#216781 = DIRECTION('',(0.999996203247,-2.75562895927E-03,0.)); +#216782 = ORIENTED_EDGE('',*,*,#216783,.T.); +#216783 = EDGE_CURVE('',#216776,#216784,#216786,.T.); +#216784 = VERTEX_POINT('',#216785); +#216785 = CARTESIAN_POINT('',(109.895462,-64.624229,1.585)); +#216786 = LINE('',#216787,#216788); +#216787 = CARTESIAN_POINT('',(109.868277,-64.619029,1.585)); +#216788 = VECTOR('',#216789,1.); +#216789 = DIRECTION('',(0.982192801029,-0.187875761095,0.)); +#216790 = ORIENTED_EDGE('',*,*,#216791,.T.); +#216791 = EDGE_CURVE('',#216784,#216792,#216794,.T.); +#216792 = VERTEX_POINT('',#216793); +#216793 = CARTESIAN_POINT('',(110.17498,-64.719933,1.585)); +#216794 = LINE('',#216795,#216796); +#216795 = CARTESIAN_POINT('',(109.895462,-64.624229,1.585)); +#216796 = VECTOR('',#216797,1.); +#216797 = DIRECTION('',(0.946081626447,-0.323928319384,0.)); +#216798 = ORIENTED_EDGE('',*,*,#216799,.T.); +#216799 = EDGE_CURVE('',#216792,#216800,#216802,.T.); +#216800 = VERTEX_POINT('',#216801); +#216801 = CARTESIAN_POINT('',(110.097442,-64.952546,1.585)); +#216802 = CIRCLE('',#216803,0.12499954004); +#216803 = AXIS2_PLACEMENT_3D('',#216804,#216805,#216806); +#216804 = CARTESIAN_POINT('',(110.11307698876,-64.82852812976,1.585)); +#216805 = DIRECTION('',(0.,0.,-1.)); +#216806 = DIRECTION('',(0.495225912188,0.868764234933,0.)); +#216807 = ORIENTED_EDGE('',*,*,#216808,.T.); +#216808 = EDGE_CURVE('',#216800,#216809,#216811,.T.); +#216809 = VERTEX_POINT('',#216810); +#216810 = CARTESIAN_POINT('',(109.835651,-64.867814,1.585)); +#216811 = LINE('',#216812,#216813); +#216812 = CARTESIAN_POINT('',(110.097442,-64.952546,1.585)); +#216813 = VECTOR('',#216814,1.); +#216814 = DIRECTION('',(-0.951407352598,0.307935138337,0.)); +#216815 = ORIENTED_EDGE('',*,*,#216816,.T.); +#216816 = EDGE_CURVE('',#216809,#216817,#216819,.T.); +#216817 = VERTEX_POINT('',#216818); +#216818 = CARTESIAN_POINT('',(109.456872,-64.867814,1.585)); +#216819 = LINE('',#216820,#216821); +#216820 = CARTESIAN_POINT('',(109.835651,-64.867814,1.585)); +#216821 = VECTOR('',#216822,1.); +#216822 = DIRECTION('',(-1.,0.,0.)); +#216823 = ORIENTED_EDGE('',*,*,#216824,.T.); +#216824 = EDGE_CURVE('',#216817,#216825,#216827,.T.); +#216825 = VERTEX_POINT('',#216826); +#216826 = CARTESIAN_POINT('',(109.209506,-65.115179,1.585)); +#216827 = CIRCLE('',#216828,0.347626269899); +#216828 = AXIS2_PLACEMENT_3D('',#216829,#216830,#216831); +#216829 = CARTESIAN_POINT('',(109.54561406136,-65.20392242011,1.585)); +#216830 = DIRECTION('',(0.,0.,1.)); +#216831 = DIRECTION('',(-0.255280078187,0.966867147896,0.)); +#216832 = ORIENTED_EDGE('',*,*,#216833,.T.); +#216833 = EDGE_CURVE('',#216825,#216834,#216836,.T.); +#216834 = VERTEX_POINT('',#216835); +#216835 = CARTESIAN_POINT('',(109.209506,-65.227592,1.585)); +#216836 = LINE('',#216837,#216838); +#216837 = CARTESIAN_POINT('',(109.209506,-65.115179,1.585)); +#216838 = VECTOR('',#216839,1.); +#216839 = DIRECTION('',(0.,-1.,0.)); +#216840 = ORIENTED_EDGE('',*,*,#216841,.T.); +#216841 = EDGE_CURVE('',#216834,#216842,#216844,.T.); +#216842 = VERTEX_POINT('',#216843); +#216843 = CARTESIAN_POINT('',(109.272952,-65.354484,1.585)); +#216844 = LINE('',#216845,#216846); +#216845 = CARTESIAN_POINT('',(109.209506,-65.227592,1.585)); +#216846 = VECTOR('',#216847,1.); +#216847 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#216848 = ORIENTED_EDGE('',*,*,#216849,.T.); +#216849 = EDGE_CURVE('',#216842,#216850,#216852,.T.); +#216850 = VERTEX_POINT('',#216851); +#216851 = CARTESIAN_POINT('',(109.329978,-65.41151,1.585)); +#216852 = LINE('',#216853,#216854); +#216853 = CARTESIAN_POINT('',(109.272952,-65.354484,1.585)); +#216854 = VECTOR('',#216855,1.); +#216855 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#216856 = ORIENTED_EDGE('',*,*,#216857,.T.); +#216857 = EDGE_CURVE('',#216850,#216858,#216860,.T.); +#216858 = VERTEX_POINT('',#216859); +#216859 = CARTESIAN_POINT('',(109.47099,-65.482016,1.585)); +#216860 = LINE('',#216861,#216862); +#216861 = CARTESIAN_POINT('',(109.329978,-65.41151,1.585)); +#216862 = VECTOR('',#216863,1.); +#216863 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#216864 = ORIENTED_EDGE('',*,*,#216865,.T.); +#216865 = EDGE_CURVE('',#216858,#216866,#216868,.T.); +#216866 = VERTEX_POINT('',#216867); +#216867 = CARTESIAN_POINT('',(109.826121,-65.573867,1.585)); +#216868 = LINE('',#216869,#216870); +#216869 = CARTESIAN_POINT('',(109.47099,-65.482016,1.585)); +#216870 = VECTOR('',#216871,1.); +#216871 = DIRECTION('',(0.968142433695,-0.250400135942,0.)); +#216872 = ORIENTED_EDGE('',*,*,#216873,.T.); +#216873 = EDGE_CURVE('',#216866,#216874,#216876,.T.); +#216874 = VERTEX_POINT('',#216875); +#216875 = CARTESIAN_POINT('',(110.018288,-65.672635,1.585)); +#216876 = LINE('',#216877,#216878); +#216877 = CARTESIAN_POINT('',(109.826121,-65.573867,1.585)); +#216878 = VECTOR('',#216879,1.); +#216879 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#216880 = ORIENTED_EDGE('',*,*,#216881,.T.); +#216881 = EDGE_CURVE('',#216874,#216882,#216884,.T.); +#216882 = VERTEX_POINT('',#216883); +#216883 = CARTESIAN_POINT('',(110.131297,-65.787655,1.585)); +#216884 = LINE('',#216885,#216886); +#216885 = CARTESIAN_POINT('',(110.018288,-65.672635,1.585)); +#216886 = VECTOR('',#216887,1.); +#216887 = DIRECTION('',(0.700843514729,-0.713315055121,0.)); +#216888 = ORIENTED_EDGE('',*,*,#216889,.T.); +#216889 = EDGE_CURVE('',#216882,#216890,#216892,.T.); +#216890 = VERTEX_POINT('',#216891); +#216891 = CARTESIAN_POINT('',(110.233638,-65.995512,1.585)); +#216892 = LINE('',#216893,#216894); +#216893 = CARTESIAN_POINT('',(110.131297,-65.787655,1.585)); +#216894 = VECTOR('',#216895,1.); +#216895 = DIRECTION('',(0.44172363024,-0.897151177053,0.)); +#216896 = ORIENTED_EDGE('',*,*,#216897,.T.); +#216897 = EDGE_CURVE('',#216890,#216898,#216900,.T.); +#216898 = VERTEX_POINT('',#216899); +#216899 = CARTESIAN_POINT('',(110.238077,-66.028528,1.585)); +#216900 = LINE('',#216901,#216902); +#216901 = CARTESIAN_POINT('',(110.233638,-65.995512,1.585)); +#216902 = VECTOR('',#216903,1.); +#216903 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#216904 = ORIENTED_EDGE('',*,*,#216905,.T.); +#216905 = EDGE_CURVE('',#216898,#216906,#216908,.T.); +#216906 = VERTEX_POINT('',#216907); +#216907 = CARTESIAN_POINT('',(110.235675,-66.224343,1.585)); +#216908 = LINE('',#216909,#216910); +#216909 = CARTESIAN_POINT('',(110.238077,-66.028528,1.585)); +#216910 = VECTOR('',#216911,1.); +#216911 = DIRECTION('',(-1.226575749656E-02,-0.999924772767,0.)); +#216912 = ORIENTED_EDGE('',*,*,#216913,.T.); +#216913 = EDGE_CURVE('',#216906,#216914,#216916,.T.); +#216914 = VERTEX_POINT('',#216915); +#216915 = CARTESIAN_POINT('',(110.22488,-66.255859,1.585)); +#216916 = LINE('',#216917,#216918); +#216917 = CARTESIAN_POINT('',(110.235675,-66.224343,1.585)); +#216918 = VECTOR('',#216919,1.); +#216919 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#216920 = ORIENTED_EDGE('',*,*,#216921,.T.); +#216921 = EDGE_CURVE('',#216914,#216922,#216924,.T.); +#216922 = VERTEX_POINT('',#216923); +#216923 = CARTESIAN_POINT('',(110.126112,-66.448024,1.585)); +#216924 = LINE('',#216925,#216926); +#216925 = CARTESIAN_POINT('',(110.22488,-66.255859,1.585)); +#216926 = VECTOR('',#216927,1.); +#216927 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#216928 = ORIENTED_EDGE('',*,*,#216929,.T.); +#216929 = EDGE_CURVE('',#216922,#216930,#216932,.T.); +#216930 = VERTEX_POINT('',#216931); +#216931 = CARTESIAN_POINT('',(110.011096,-66.561033,1.585)); +#216932 = LINE('',#216933,#216934); +#216933 = CARTESIAN_POINT('',(110.126112,-66.448024,1.585)); +#216934 = VECTOR('',#216935,1.); +#216935 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#216936 = ORIENTED_EDGE('',*,*,#216937,.T.); +#216937 = EDGE_CURVE('',#216930,#216938,#216940,.T.); +#216938 = VERTEX_POINT('',#216939); +#216939 = CARTESIAN_POINT('',(109.803236,-66.663375,1.585)); +#216940 = LINE('',#216941,#216942); +#216941 = CARTESIAN_POINT('',(110.011096,-66.561033,1.585)); +#216942 = VECTOR('',#216943,1.); +#216943 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#216944 = ORIENTED_EDGE('',*,*,#216945,.T.); +#216945 = EDGE_CURVE('',#216938,#216946,#216948,.T.); +#216946 = VERTEX_POINT('',#216947); +#216947 = CARTESIAN_POINT('',(109.77022,-66.667814,1.585)); +#216948 = LINE('',#216949,#216950); +#216949 = CARTESIAN_POINT('',(109.803236,-66.663375,1.585)); +#216950 = VECTOR('',#216951,1.); +#216951 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#216952 = ORIENTED_EDGE('',*,*,#216953,.T.); +#216953 = EDGE_CURVE('',#216946,#216954,#216956,.T.); +#216954 = VERTEX_POINT('',#216955); +#216955 = CARTESIAN_POINT('',(109.317263,-66.665412,1.585)); +#216956 = LINE('',#216957,#216958); +#216957 = CARTESIAN_POINT('',(109.77022,-66.667814,1.585)); +#216958 = VECTOR('',#216959,1.); +#216959 = DIRECTION('',(-0.999985939755,5.302857064344E-03,0.)); +#216960 = ORIENTED_EDGE('',*,*,#216961,.T.); +#216961 = EDGE_CURVE('',#216954,#216962,#216964,.T.); +#216962 = VERTEX_POINT('',#216963); +#216963 = CARTESIAN_POINT('',(109.022603,-66.565695,1.585)); +#216964 = LINE('',#216965,#216966); +#216965 = CARTESIAN_POINT('',(109.317263,-66.665412,1.585)); +#216966 = VECTOR('',#216967,1.); +#216967 = DIRECTION('',(-0.947229710679,0.320555572727,0.)); +#216968 = ORIENTED_EDGE('',*,*,#216969,.T.); +#216969 = EDGE_CURVE('',#216962,#216970,#216972,.T.); +#216970 = VERTEX_POINT('',#216971); +#216971 = CARTESIAN_POINT('',(109.10014,-66.333082,1.585)); +#216972 = CIRCLE('',#216973,0.124999465062); +#216973 = AXIS2_PLACEMENT_3D('',#216974,#216975,#216976); +#216974 = CARTESIAN_POINT('',(109.08450593058,-66.45709991055,1.585)); +#216975 = DIRECTION('',(0.,0.,-1.)); +#216976 = DIRECTION('',(-0.495225563995,-0.868764433415,-0.)); +#216977 = ORIENTED_EDGE('',*,*,#216978,.T.); +#216978 = EDGE_CURVE('',#216970,#216979,#216981,.T.); +#216979 = VERTEX_POINT('',#216980); +#216980 = CARTESIAN_POINT('',(109.361935,-66.417814,1.585)); +#216981 = LINE('',#216982,#216983); +#216982 = CARTESIAN_POINT('',(109.10014,-66.333082,1.585)); +#216983 = VECTOR('',#216984,1.); +#216984 = DIRECTION('',(0.951408731017,-0.307930879492,0.)); +#216985 = ORIENTED_EDGE('',*,*,#216986,.T.); +#216986 = EDGE_CURVE('',#216979,#216987,#216989,.T.); +#216987 = VERTEX_POINT('',#216988); +#216988 = CARTESIAN_POINT('',(109.740711,-66.417814,1.585)); +#216989 = LINE('',#216990,#216991); +#216990 = CARTESIAN_POINT('',(109.361935,-66.417814,1.585)); +#216991 = VECTOR('',#216992,1.); +#216992 = DIRECTION('',(1.,0.,0.)); +#216993 = ORIENTED_EDGE('',*,*,#216994,.T.); +#216994 = EDGE_CURVE('',#216987,#216995,#216997,.T.); +#216995 = VERTEX_POINT('',#216996); +#216996 = CARTESIAN_POINT('',(109.988077,-66.170448,1.585)); +#216997 = CIRCLE('',#216998,0.347641001424); +#216998 = AXIS2_PLACEMENT_3D('',#216999,#217000,#217001); +#216999 = CARTESIAN_POINT('',(109.65195660111,-66.08169360111,1.585)); +#217000 = DIRECTION('',(0.,0.,1.)); +#217001 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#217002 = ORIENTED_EDGE('',*,*,#217003,.T.); +#217003 = EDGE_CURVE('',#216995,#217004,#217006,.T.); +#217004 = VERTEX_POINT('',#217005); +#217005 = CARTESIAN_POINT('',(109.988077,-66.058036,1.585)); +#217006 = LINE('',#217007,#217008); +#217007 = CARTESIAN_POINT('',(109.988077,-66.170448,1.585)); +#217008 = VECTOR('',#217009,1.); +#217009 = DIRECTION('',(0.,1.,0.)); +#217010 = ORIENTED_EDGE('',*,*,#217011,.T.); +#217011 = EDGE_CURVE('',#217004,#217012,#217014,.T.); +#217012 = VERTEX_POINT('',#217013); +#217013 = CARTESIAN_POINT('',(109.924631,-65.931145,1.585)); +#217014 = LINE('',#217015,#217016); +#217015 = CARTESIAN_POINT('',(109.988077,-66.058036,1.585)); +#217016 = VECTOR('',#217017,1.); +#217017 = DIRECTION('',(-0.447216415007,0.894425781241,0.)); +#217018 = ORIENTED_EDGE('',*,*,#217019,.T.); +#217019 = EDGE_CURVE('',#217012,#217020,#217022,.T.); +#217020 = VERTEX_POINT('',#217021); +#217021 = CARTESIAN_POINT('',(109.867602,-65.874116,1.585)); +#217022 = LINE('',#217023,#217024); +#217023 = CARTESIAN_POINT('',(109.924631,-65.931145,1.585)); +#217024 = VECTOR('',#217025,1.); +#217025 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217026 = ORIENTED_EDGE('',*,*,#217027,.T.); +#217027 = EDGE_CURVE('',#217020,#217028,#217030,.T.); +#217028 = VERTEX_POINT('',#217029); +#217029 = CARTESIAN_POINT('',(109.726591,-65.803611,1.585)); +#217030 = LINE('',#217031,#217032); +#217031 = CARTESIAN_POINT('',(109.867602,-65.874116,1.585)); +#217032 = VECTOR('',#217033,1.); +#217033 = DIRECTION('',(-0.89442845959,0.44721105831,0.)); +#217034 = ORIENTED_EDGE('',*,*,#217035,.T.); +#217035 = EDGE_CURVE('',#217028,#217036,#217038,.T.); +#217036 = VERTEX_POINT('',#217037); +#217037 = CARTESIAN_POINT('',(109.371461,-65.71176,1.585)); +#217038 = LINE('',#217039,#217040); +#217039 = CARTESIAN_POINT('',(109.726591,-65.803611,1.585)); +#217040 = VECTOR('',#217041,1.); +#217041 = DIRECTION('',(-0.968142262763,0.250400796827,0.)); +#217042 = ORIENTED_EDGE('',*,*,#217043,.T.); +#217043 = EDGE_CURVE('',#217036,#217044,#217046,.T.); +#217044 = VERTEX_POINT('',#217045); +#217045 = CARTESIAN_POINT('',(109.179295,-65.612991,1.585)); +#217046 = LINE('',#217047,#217048); +#217047 = CARTESIAN_POINT('',(109.371461,-65.71176,1.585)); +#217048 = VECTOR('',#217049,1.); +#217049 = DIRECTION('',(-0.889399267098,0.457131210579,0.)); +#217050 = ORIENTED_EDGE('',*,*,#217051,.T.); +#217051 = EDGE_CURVE('',#217044,#217052,#217054,.T.); +#217052 = VERTEX_POINT('',#217053); +#217053 = CARTESIAN_POINT('',(109.066287,-65.497974,1.585)); +#217054 = LINE('',#217055,#217056); +#217055 = CARTESIAN_POINT('',(109.179295,-65.612991,1.585)); +#217056 = VECTOR('',#217057,1.); +#217057 = DIRECTION('',(-0.700849660337,0.71330901691,0.)); +#217058 = ORIENTED_EDGE('',*,*,#217059,.T.); +#217059 = EDGE_CURVE('',#217052,#217060,#217062,.T.); +#217060 = VERTEX_POINT('',#217061); +#217061 = CARTESIAN_POINT('',(108.963945,-65.290116,1.585)); +#217062 = LINE('',#217063,#217064); +#217063 = CARTESIAN_POINT('',(109.066287,-65.497974,1.585)); +#217064 = VECTOR('',#217065,1.); +#217065 = DIRECTION('',(-0.441725393771,0.897150308754,0.)); +#217066 = ORIENTED_EDGE('',*,*,#217067,.T.); +#217067 = EDGE_CURVE('',#217060,#217068,#217070,.T.); +#217068 = VERTEX_POINT('',#217069); +#217069 = CARTESIAN_POINT('',(108.959506,-65.2571,1.585)); +#217070 = LINE('',#217071,#217072); +#217071 = CARTESIAN_POINT('',(108.963945,-65.290116,1.585)); +#217072 = VECTOR('',#217073,1.); +#217073 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#217074 = ORIENTED_EDGE('',*,*,#217075,.T.); +#217075 = EDGE_CURVE('',#217068,#217076,#217078,.T.); +#217076 = VERTEX_POINT('',#217077); +#217077 = CARTESIAN_POINT('',(108.961908,-65.061285,1.585)); +#217078 = LINE('',#217079,#217080); +#217079 = CARTESIAN_POINT('',(108.959506,-65.2571,1.585)); +#217080 = VECTOR('',#217081,1.); +#217081 = DIRECTION('',(1.226575749649E-02,0.999924772767,0.)); +#217082 = ORIENTED_EDGE('',*,*,#217083,.T.); +#217083 = EDGE_CURVE('',#217076,#217084,#217086,.T.); +#217084 = VERTEX_POINT('',#217085); +#217085 = CARTESIAN_POINT('',(108.972702,-65.02977,1.585)); +#217086 = LINE('',#217087,#217088); +#217087 = CARTESIAN_POINT('',(108.961908,-65.061285,1.585)); +#217088 = VECTOR('',#217089,1.); +#217089 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#217090 = ORIENTED_EDGE('',*,*,#217091,.T.); +#217091 = EDGE_CURVE('',#217084,#217092,#217094,.T.); +#217092 = VERTEX_POINT('',#217093); +#217093 = CARTESIAN_POINT('',(109.07147,-64.837603,1.585)); +#217094 = LINE('',#217095,#217096); +#217095 = CARTESIAN_POINT('',(108.972702,-65.02977,1.585)); +#217096 = VECTOR('',#217097,1.); +#217097 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#217098 = ORIENTED_EDGE('',*,*,#217099,.T.); +#217099 = EDGE_CURVE('',#217092,#216758,#217100,.T.); +#217100 = LINE('',#217101,#217102); +#217101 = CARTESIAN_POINT('',(109.07147,-64.837603,1.585)); +#217102 = VECTOR('',#217103,1.); +#217103 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#217104 = PLANE('',#217105); +#217105 = AXIS2_PLACEMENT_3D('',#217106,#217107,#217108); +#217106 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217107 = DIRECTION('',(0.,0.,1.)); +#217108 = DIRECTION('',(1.,0.,-0.)); +#217109 = SHELL_BASED_SURFACE_MODEL('',(#217110)); +#217110 = OPEN_SHELL('',(#217111)); +#217111 = ADVANCED_FACE('',(#217112),#217376,.T.); +#217112 = FACE_BOUND('',#217113,.F.); +#217113 = EDGE_LOOP('',(#217114,#217125,#217133,#217142,#217150,#217158, + #217166,#217174,#217182,#217190,#217198,#217206,#217214,#217222, + #217230,#217238,#217246,#217254,#217262,#217270,#217278,#217286, + #217295,#217303,#217312,#217320,#217329,#217337,#217345,#217353, + #217362,#217370)); +#217114 = ORIENTED_EDGE('',*,*,#217115,.T.); +#217115 = EDGE_CURVE('',#217116,#217118,#217120,.T.); +#217116 = VERTEX_POINT('',#217117); +#217117 = CARTESIAN_POINT('',(114.117263,-64.865412,1.585)); +#217118 = VERTEX_POINT('',#217119); +#217119 = CARTESIAN_POINT('',(114.117263,-64.620216,1.585)); +#217120 = CIRCLE('',#217121,0.1249997864); +#217121 = AXIS2_PLACEMENT_3D('',#217122,#217123,#217124); +#217122 = CARTESIAN_POINT('',(114.141649,-64.742814,1.585)); +#217123 = DIRECTION('',(0.,0.,-1.)); +#217124 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#217125 = ORIENTED_EDGE('',*,*,#217126,.T.); +#217126 = EDGE_CURVE('',#217118,#217127,#217129,.T.); +#217127 = VERTEX_POINT('',#217128); +#217128 = CARTESIAN_POINT('',(115.268828,-64.619084,1.585)); +#217129 = LINE('',#217130,#217131); +#217130 = CARTESIAN_POINT('',(114.117263,-64.620216,1.585)); +#217131 = VECTOR('',#217132,1.); +#217132 = DIRECTION('',(0.999999516846,9.830096026433E-04,0.)); +#217133 = ORIENTED_EDGE('',*,*,#217134,.T.); +#217134 = EDGE_CURVE('',#217127,#217135,#217137,.T.); +#217135 = VERTEX_POINT('',#217136); +#217136 = CARTESIAN_POINT('',(115.378533,-64.718428,1.585)); +#217137 = CIRCLE('',#217138,0.123082651491); +#217138 = AXIS2_PLACEMENT_3D('',#217139,#217140,#217141); +#217139 = CARTESIAN_POINT('',(115.25766260791,-64.74165917333,1.585)); +#217140 = DIRECTION('',(0.,0.,-1.)); +#217141 = DIRECTION('',(9.071458856004E-02,0.995876931866,0.)); +#217142 = ORIENTED_EDGE('',*,*,#217143,.T.); +#217143 = EDGE_CURVE('',#217135,#217144,#217146,.T.); +#217144 = VERTEX_POINT('',#217145); +#217145 = CARTESIAN_POINT('',(115.378533,-64.7672,1.585)); +#217146 = LINE('',#217147,#217148); +#217147 = CARTESIAN_POINT('',(115.378533,-64.718428,1.585)); +#217148 = VECTOR('',#217149,1.); +#217149 = DIRECTION('',(0.,-1.,0.)); +#217150 = ORIENTED_EDGE('',*,*,#217151,.T.); +#217151 = EDGE_CURVE('',#217144,#217152,#217154,.T.); +#217152 = VERTEX_POINT('',#217153); +#217153 = CARTESIAN_POINT('',(115.357542,-64.814586,1.585)); +#217154 = LINE('',#217155,#217156); +#217155 = CARTESIAN_POINT('',(115.378533,-64.7672,1.585)); +#217156 = VECTOR('',#217157,1.); +#217157 = DIRECTION('',(-0.40501925629,-0.914308154855,0.)); +#217158 = ORIENTED_EDGE('',*,*,#217159,.T.); +#217159 = EDGE_CURVE('',#217152,#217160,#217162,.T.); +#217160 = VERTEX_POINT('',#217161); +#217161 = CARTESIAN_POINT('',(114.929951,-65.30519,1.585)); +#217162 = LINE('',#217163,#217164); +#217163 = CARTESIAN_POINT('',(115.357542,-64.814586,1.585)); +#217164 = VECTOR('',#217165,1.); +#217165 = DIRECTION('',(-0.657034748727,-0.75386029141,0.)); +#217166 = ORIENTED_EDGE('',*,*,#217167,.T.); +#217167 = EDGE_CURVE('',#217160,#217168,#217170,.T.); +#217168 = VERTEX_POINT('',#217169); +#217169 = CARTESIAN_POINT('',(114.968979,-65.316724,1.585)); +#217170 = LINE('',#217171,#217172); +#217171 = CARTESIAN_POINT('',(114.929951,-65.30519,1.585)); +#217172 = VECTOR('',#217173,1.); +#217173 = DIRECTION('',(0.958997674487,-0.283413938135,0.)); +#217174 = ORIENTED_EDGE('',*,*,#217175,.T.); +#217175 = EDGE_CURVE('',#217168,#217176,#217178,.T.); +#217176 = VERTEX_POINT('',#217177); +#217177 = CARTESIAN_POINT('',(115.161146,-65.415492,1.585)); +#217178 = LINE('',#217179,#217180); +#217179 = CARTESIAN_POINT('',(114.968979,-65.316724,1.585)); +#217180 = VECTOR('',#217181,1.); +#217181 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#217182 = ORIENTED_EDGE('',*,*,#217183,.T.); +#217183 = EDGE_CURVE('',#217176,#217184,#217186,.T.); +#217184 = VERTEX_POINT('',#217185); +#217185 = CARTESIAN_POINT('',(115.274155,-65.530512,1.585)); +#217186 = LINE('',#217187,#217188); +#217187 = CARTESIAN_POINT('',(115.161146,-65.415492,1.585)); +#217188 = VECTOR('',#217189,1.); +#217189 = DIRECTION('',(0.700843514729,-0.713315055121,0.)); +#217190 = ORIENTED_EDGE('',*,*,#217191,.T.); +#217191 = EDGE_CURVE('',#217184,#217192,#217194,.T.); +#217192 = VERTEX_POINT('',#217193); +#217193 = CARTESIAN_POINT('',(115.376496,-65.738369,1.585)); +#217194 = LINE('',#217195,#217196); +#217195 = CARTESIAN_POINT('',(115.274155,-65.530512,1.585)); +#217196 = VECTOR('',#217197,1.); +#217197 = DIRECTION('',(0.44172363024,-0.897151177053,0.)); +#217198 = ORIENTED_EDGE('',*,*,#217199,.T.); +#217199 = EDGE_CURVE('',#217192,#217200,#217202,.T.); +#217200 = VERTEX_POINT('',#217201); +#217201 = CARTESIAN_POINT('',(115.380935,-65.771385,1.585)); +#217202 = LINE('',#217203,#217204); +#217203 = CARTESIAN_POINT('',(115.376496,-65.738369,1.585)); +#217204 = VECTOR('',#217205,1.); +#217205 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#217206 = ORIENTED_EDGE('',*,*,#217207,.T.); +#217207 = EDGE_CURVE('',#217200,#217208,#217210,.T.); +#217208 = VERTEX_POINT('',#217209); +#217209 = CARTESIAN_POINT('',(115.378533,-66.224343,1.585)); +#217210 = LINE('',#217211,#217212); +#217211 = CARTESIAN_POINT('',(115.380935,-65.771385,1.585)); +#217212 = VECTOR('',#217213,1.); +#217213 = DIRECTION('',(-5.30284535747E-03,-0.999985939817,0.)); +#217214 = ORIENTED_EDGE('',*,*,#217215,.T.); +#217215 = EDGE_CURVE('',#217208,#217216,#217218,.T.); +#217216 = VERTEX_POINT('',#217217); +#217217 = CARTESIAN_POINT('',(115.367738,-66.255859,1.585)); +#217218 = LINE('',#217219,#217220); +#217219 = CARTESIAN_POINT('',(115.378533,-66.224343,1.585)); +#217220 = VECTOR('',#217221,1.); +#217221 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#217222 = ORIENTED_EDGE('',*,*,#217223,.T.); +#217223 = EDGE_CURVE('',#217216,#217224,#217226,.T.); +#217224 = VERTEX_POINT('',#217225); +#217225 = CARTESIAN_POINT('',(115.26897,-66.448024,1.585)); +#217226 = LINE('',#217227,#217228); +#217227 = CARTESIAN_POINT('',(115.367738,-66.255859,1.585)); +#217228 = VECTOR('',#217229,1.); +#217229 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#217230 = ORIENTED_EDGE('',*,*,#217231,.T.); +#217231 = EDGE_CURVE('',#217224,#217232,#217234,.T.); +#217232 = VERTEX_POINT('',#217233); +#217233 = CARTESIAN_POINT('',(115.153954,-66.561033,1.585)); +#217234 = LINE('',#217235,#217236); +#217235 = CARTESIAN_POINT('',(115.26897,-66.448024,1.585)); +#217236 = VECTOR('',#217237,1.); +#217237 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#217238 = ORIENTED_EDGE('',*,*,#217239,.T.); +#217239 = EDGE_CURVE('',#217232,#217240,#217242,.T.); +#217240 = VERTEX_POINT('',#217241); +#217241 = CARTESIAN_POINT('',(114.946094,-66.663375,1.585)); +#217242 = LINE('',#217243,#217244); +#217243 = CARTESIAN_POINT('',(115.153954,-66.561033,1.585)); +#217244 = VECTOR('',#217245,1.); +#217245 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#217246 = ORIENTED_EDGE('',*,*,#217247,.T.); +#217247 = EDGE_CURVE('',#217240,#217248,#217250,.T.); +#217248 = VERTEX_POINT('',#217249); +#217249 = CARTESIAN_POINT('',(114.913078,-66.667814,1.585)); +#217250 = LINE('',#217251,#217252); +#217251 = CARTESIAN_POINT('',(114.946094,-66.663375,1.585)); +#217252 = VECTOR('',#217253,1.); +#217253 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#217254 = ORIENTED_EDGE('',*,*,#217255,.T.); +#217255 = EDGE_CURVE('',#217248,#217256,#217258,.T.); +#217256 = VERTEX_POINT('',#217257); +#217257 = CARTESIAN_POINT('',(114.374406,-66.665412,1.585)); +#217258 = LINE('',#217259,#217260); +#217259 = CARTESIAN_POINT('',(114.913078,-66.667814,1.585)); +#217260 = VECTOR('',#217261,1.); +#217261 = DIRECTION('',(-0.999990058298,4.459069935018E-03,0.)); +#217262 = ORIENTED_EDGE('',*,*,#217263,.T.); +#217263 = EDGE_CURVE('',#217256,#217264,#217266,.T.); +#217264 = VERTEX_POINT('',#217265); +#217265 = CARTESIAN_POINT('',(114.34289,-66.654617,1.585)); +#217266 = LINE('',#217267,#217268); +#217267 = CARTESIAN_POINT('',(114.374406,-66.665412,1.585)); +#217268 = VECTOR('',#217269,1.); +#217269 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#217270 = ORIENTED_EDGE('',*,*,#217271,.T.); +#217271 = EDGE_CURVE('',#217264,#217272,#217274,.T.); +#217272 = VERTEX_POINT('',#217273); +#217273 = CARTESIAN_POINT('',(114.150725,-66.555849,1.585)); +#217274 = LINE('',#217275,#217276); +#217275 = CARTESIAN_POINT('',(114.34289,-66.654617,1.585)); +#217276 = VECTOR('',#217277,1.); +#217277 = DIRECTION('',(-0.889400181666,0.457129431181,0.)); +#217278 = ORIENTED_EDGE('',*,*,#217279,.T.); +#217279 = EDGE_CURVE('',#217272,#217280,#217282,.T.); +#217280 = VERTEX_POINT('',#217281); +#217281 = CARTESIAN_POINT('',(114.037716,-66.440831,1.585)); +#217282 = LINE('',#217283,#217284); +#217283 = CARTESIAN_POINT('',(114.150725,-66.555849,1.585)); +#217284 = VECTOR('',#217285,1.); +#217285 = DIRECTION('',(-0.700849715454,0.713308962756,0.)); +#217286 = ORIENTED_EDGE('',*,*,#217287,.T.); +#217287 = EDGE_CURVE('',#217280,#217288,#217290,.T.); +#217288 = VERTEX_POINT('',#217289); +#217289 = CARTESIAN_POINT('',(114.211095,-66.267452,1.585)); +#217290 = CIRCLE('',#217291,0.124999261618); +#217291 = AXIS2_PLACEMENT_3D('',#217292,#217293,#217294); +#217292 = CARTESIAN_POINT('',(114.141649,-66.371385,1.585)); +#217293 = DIRECTION('',(0.,0.,-1.)); +#217294 = DIRECTION('',(-0.831468911535,-0.555571281791,-0.)); +#217295 = ORIENTED_EDGE('',*,*,#217296,.T.); +#217296 = EDGE_CURVE('',#217288,#217297,#217299,.T.); +#217297 = VERTEX_POINT('',#217298); +#217298 = CARTESIAN_POINT('',(114.301409,-66.354368,1.585)); +#217299 = LINE('',#217300,#217301); +#217300 = CARTESIAN_POINT('',(114.211095,-66.267452,1.585)); +#217301 = VECTOR('',#217302,1.); +#217302 = DIRECTION('',(0.720531596103,-0.69342210739,0.)); +#217303 = ORIENTED_EDGE('',*,*,#217304,.T.); +#217304 = EDGE_CURVE('',#217297,#217305,#217307,.T.); +#217305 = VERTEX_POINT('',#217306); +#217306 = CARTESIAN_POINT('',(115.01046,-66.354368,1.585)); +#217307 = CIRCLE('',#217308,0.654727516029); +#217308 = AXIS2_PLACEMENT_3D('',#217309,#217310,#217311); +#217309 = CARTESIAN_POINT('',(114.6559345,-65.803932,1.585)); +#217310 = DIRECTION('',(0.,0.,1.)); +#217311 = DIRECTION('',(-0.541485566622,-0.840710045819,0.)); +#217312 = ORIENTED_EDGE('',*,*,#217313,.T.); +#217313 = EDGE_CURVE('',#217305,#217314,#217316,.T.); +#217314 = VERTEX_POINT('',#217315); +#217315 = CARTESIAN_POINT('',(115.067489,-66.297339,1.585)); +#217316 = LINE('',#217317,#217318); +#217317 = CARTESIAN_POINT('',(115.01046,-66.354368,1.585)); +#217318 = VECTOR('',#217319,1.); +#217319 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217320 = ORIENTED_EDGE('',*,*,#217321,.T.); +#217321 = EDGE_CURVE('',#217314,#217322,#217324,.T.); +#217322 = VERTEX_POINT('',#217323); +#217323 = CARTESIAN_POINT('',(115.067489,-65.674002,1.585)); +#217324 = CIRCLE('',#217325,0.559554362254); +#217325 = AXIS2_PLACEMENT_3D('',#217326,#217327,#217328); +#217326 = CARTESIAN_POINT('',(114.60276991235,-65.9856705,1.585)); +#217327 = DIRECTION('',(0.,-0.,1.)); +#217328 = DIRECTION('',(0.830516423421,-0.556994138593,-0.)); +#217329 = ORIENTED_EDGE('',*,*,#217330,.T.); +#217330 = EDGE_CURVE('',#217322,#217331,#217333,.T.); +#217331 = VERTEX_POINT('',#217332); +#217332 = CARTESIAN_POINT('',(115.01046,-65.616973,1.585)); +#217333 = LINE('',#217334,#217335); +#217334 = CARTESIAN_POINT('',(115.067489,-65.674002,1.585)); +#217335 = VECTOR('',#217336,1.); +#217336 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217337 = ORIENTED_EDGE('',*,*,#217338,.T.); +#217338 = EDGE_CURVE('',#217331,#217339,#217341,.T.); +#217339 = VERTEX_POINT('',#217340); +#217340 = CARTESIAN_POINT('',(114.883569,-65.553528,1.585)); +#217341 = LINE('',#217342,#217343); +#217342 = CARTESIAN_POINT('',(115.01046,-65.616973,1.585)); +#217343 = VECTOR('',#217344,1.); +#217344 = DIRECTION('',(-0.894428600754,0.44721077598,0.)); +#217345 = ORIENTED_EDGE('',*,*,#217346,.T.); +#217346 = EDGE_CURVE('',#217339,#217347,#217349,.T.); +#217347 = VERTEX_POINT('',#217348); +#217348 = CARTESIAN_POINT('',(114.631549,-65.551126,1.585)); +#217349 = LINE('',#217350,#217351); +#217350 = CARTESIAN_POINT('',(114.883569,-65.553528,1.585)); +#217351 = VECTOR('',#217352,1.); +#217352 = DIRECTION('',(-0.999954583213,9.530556737088E-03,0.)); +#217353 = ORIENTED_EDGE('',*,*,#217354,.T.); +#217354 = EDGE_CURVE('',#217347,#217355,#217357,.T.); +#217355 = VERTEX_POINT('',#217356); +#217356 = CARTESIAN_POINT('',(114.554327,-65.356755,1.585)); +#217357 = CIRCLE('',#217358,0.124418290804); +#217358 = AXIS2_PLACEMENT_3D('',#217359,#217360,#217361); +#217359 = CARTESIAN_POINT('',(114.65558475569,-65.4290514591,1.585)); +#217360 = DIRECTION('',(0.,0.,-1.)); +#217361 = DIRECTION('',(-0.193185065761,-0.981162336398,-0.)); +#217362 = ORIENTED_EDGE('',*,*,#217363,.T.); +#217363 = EDGE_CURVE('',#217355,#217364,#217366,.T.); +#217364 = VERTEX_POINT('',#217365); +#217365 = CARTESIAN_POINT('',(114.980464,-64.867814,1.585)); +#217366 = LINE('',#217367,#217368); +#217367 = CARTESIAN_POINT('',(114.554327,-65.356755,1.585)); +#217368 = VECTOR('',#217369,1.); +#217369 = DIRECTION('',(0.657030722337,0.753863800633,0.)); +#217370 = ORIENTED_EDGE('',*,*,#217371,.T.); +#217371 = EDGE_CURVE('',#217364,#217116,#217372,.T.); +#217372 = LINE('',#217373,#217374); +#217373 = CARTESIAN_POINT('',(114.980464,-64.867814,1.585)); +#217374 = VECTOR('',#217375,1.); +#217375 = DIRECTION('',(-0.999996128408,2.782655141068E-03,0.)); +#217376 = PLANE('',#217377); +#217377 = AXIS2_PLACEMENT_3D('',#217378,#217379,#217380); +#217378 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217379 = DIRECTION('',(0.,0.,1.)); +#217380 = DIRECTION('',(1.,0.,-0.)); +#217381 = SHELL_BASED_SURFACE_MODEL('',(#217382)); +#217382 = OPEN_SHELL('',(#217383)); +#217383 = ADVANCED_FACE('',(#217384,#217580,#217647),#217699,.T.); +#217384 = FACE_BOUND('',#217385,.F.); +#217385 = EDGE_LOOP('',(#217386,#217397,#217405,#217413,#217421,#217429, + #217437,#217445,#217453,#217461,#217469,#217477,#217485,#217493, + #217501,#217509,#217517,#217525,#217533,#217541,#217549,#217557, + #217565,#217574)); +#217386 = ORIENTED_EDGE('',*,*,#217387,.T.); +#217387 = EDGE_CURVE('',#217388,#217390,#217392,.T.); +#217388 = VERTEX_POINT('',#217389); +#217389 = CARTESIAN_POINT('',(125.676196,-64.718428,1.585)); +#217390 = VERTEX_POINT('',#217391); +#217391 = CARTESIAN_POINT('',(125.774408,-64.620216,1.585)); +#217392 = CIRCLE('',#217393,0.124998078635); +#217393 = AXIS2_PLACEMENT_3D('',#217394,#217395,#217396); +#217394 = CARTESIAN_POINT('',(125.79879254765,-64.74281254765,1.585)); +#217395 = DIRECTION('',(0.,0.,-1.)); +#217396 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#217397 = ORIENTED_EDGE('',*,*,#217398,.T.); +#217398 = EDGE_CURVE('',#217390,#217399,#217401,.T.); +#217399 = VERTEX_POINT('',#217400); +#217400 = CARTESIAN_POINT('',(126.42318,-64.620216,1.585)); +#217401 = LINE('',#217402,#217403); +#217402 = CARTESIAN_POINT('',(125.774408,-64.620216,1.585)); +#217403 = VECTOR('',#217404,1.); +#217404 = DIRECTION('',(1.,0.,0.)); +#217405 = ORIENTED_EDGE('',*,*,#217406,.T.); +#217406 = EDGE_CURVE('',#217399,#217407,#217409,.T.); +#217407 = VERTEX_POINT('',#217408); +#217408 = CARTESIAN_POINT('',(126.454695,-64.63101,1.585)); +#217409 = LINE('',#217410,#217411); +#217410 = CARTESIAN_POINT('',(126.42318,-64.620216,1.585)); +#217411 = VECTOR('',#217412,1.); +#217412 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#217413 = ORIENTED_EDGE('',*,*,#217414,.T.); +#217414 = EDGE_CURVE('',#217407,#217415,#217417,.T.); +#217415 = VERTEX_POINT('',#217416); +#217416 = CARTESIAN_POINT('',(126.646862,-64.729778,1.585)); +#217417 = LINE('',#217418,#217419); +#217418 = CARTESIAN_POINT('',(126.454695,-64.63101,1.585)); +#217419 = VECTOR('',#217420,1.); +#217420 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#217421 = ORIENTED_EDGE('',*,*,#217422,.T.); +#217422 = EDGE_CURVE('',#217415,#217423,#217425,.T.); +#217423 = VERTEX_POINT('',#217424); +#217424 = CARTESIAN_POINT('',(126.75987,-64.844796,1.585)); +#217425 = LINE('',#217426,#217427); +#217426 = CARTESIAN_POINT('',(126.646862,-64.729778,1.585)); +#217427 = VECTOR('',#217428,1.); +#217428 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#217429 = ORIENTED_EDGE('',*,*,#217430,.T.); +#217430 = EDGE_CURVE('',#217423,#217431,#217433,.T.); +#217431 = VERTEX_POINT('',#217432); +#217432 = CARTESIAN_POINT('',(126.862212,-65.052655,1.585)); +#217433 = LINE('',#217434,#217435); +#217434 = CARTESIAN_POINT('',(126.75987,-64.844796,1.585)); +#217435 = VECTOR('',#217436,1.); +#217436 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#217437 = ORIENTED_EDGE('',*,*,#217438,.T.); +#217438 = EDGE_CURVE('',#217431,#217439,#217441,.T.); +#217439 = VERTEX_POINT('',#217440); +#217440 = CARTESIAN_POINT('',(126.866651,-65.085671,1.585)); +#217441 = LINE('',#217442,#217443); +#217442 = CARTESIAN_POINT('',(126.862212,-65.052655,1.585)); +#217443 = VECTOR('',#217444,1.); +#217444 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#217445 = ORIENTED_EDGE('',*,*,#217446,.T.); +#217446 = EDGE_CURVE('',#217439,#217447,#217449,.T.); +#217447 = VERTEX_POINT('',#217448); +#217448 = CARTESIAN_POINT('',(126.864249,-65.281486,1.585)); +#217449 = LINE('',#217450,#217451); +#217450 = CARTESIAN_POINT('',(126.866651,-65.085671,1.585)); +#217451 = VECTOR('',#217452,1.); +#217452 = DIRECTION('',(-1.226575749656E-02,-0.999924772767,0.)); +#217453 = ORIENTED_EDGE('',*,*,#217454,.T.); +#217454 = EDGE_CURVE('',#217447,#217455,#217457,.T.); +#217455 = VERTEX_POINT('',#217456); +#217456 = CARTESIAN_POINT('',(126.853454,-65.313002,1.585)); +#217457 = LINE('',#217458,#217459); +#217458 = CARTESIAN_POINT('',(126.864249,-65.281486,1.585)); +#217459 = VECTOR('',#217460,1.); +#217460 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#217461 = ORIENTED_EDGE('',*,*,#217462,.T.); +#217462 = EDGE_CURVE('',#217455,#217463,#217465,.T.); +#217463 = VERTEX_POINT('',#217464); +#217464 = CARTESIAN_POINT('',(126.754686,-65.505167,1.585)); +#217465 = LINE('',#217466,#217467); +#217466 = CARTESIAN_POINT('',(126.853454,-65.313002,1.585)); +#217467 = VECTOR('',#217468,1.); +#217468 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#217469 = ORIENTED_EDGE('',*,*,#217470,.T.); +#217470 = EDGE_CURVE('',#217463,#217471,#217473,.T.); +#217471 = VERTEX_POINT('',#217472); +#217472 = CARTESIAN_POINT('',(126.695465,-65.567085,1.585)); +#217473 = LINE('',#217474,#217475); +#217474 = CARTESIAN_POINT('',(126.754686,-65.505167,1.585)); +#217475 = VECTOR('',#217476,1.); +#217476 = DIRECTION('',(-0.691192700655,-0.722670499302,0.)); +#217477 = ORIENTED_EDGE('',*,*,#217478,.T.); +#217478 = EDGE_CURVE('',#217471,#217479,#217481,.T.); +#217479 = VERTEX_POINT('',#217480); +#217480 = CARTESIAN_POINT('',(126.725383,-65.581738,1.585)); +#217481 = LINE('',#217482,#217483); +#217482 = CARTESIAN_POINT('',(126.695465,-65.567085,1.585)); +#217483 = VECTOR('',#217484,1.); +#217484 = DIRECTION('',(0.898071177728,-0.439850156001,0.)); +#217485 = ORIENTED_EDGE('',*,*,#217486,.T.); +#217486 = EDGE_CURVE('',#217479,#217487,#217489,.T.); +#217487 = VERTEX_POINT('',#217488); +#217488 = CARTESIAN_POINT('',(126.845584,-65.701939,1.585)); +#217489 = LINE('',#217490,#217491); +#217490 = CARTESIAN_POINT('',(126.725383,-65.581738,1.585)); +#217491 = VECTOR('',#217492,1.); +#217492 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217493 = ORIENTED_EDGE('',*,*,#217494,.T.); +#217494 = EDGE_CURVE('',#217487,#217495,#217497,.T.); +#217495 = VERTEX_POINT('',#217496); +#217496 = CARTESIAN_POINT('',(126.947926,-65.909798,1.585)); +#217497 = LINE('',#217498,#217499); +#217498 = CARTESIAN_POINT('',(126.845584,-65.701939,1.585)); +#217499 = VECTOR('',#217500,1.); +#217500 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#217501 = ORIENTED_EDGE('',*,*,#217502,.T.); +#217502 = EDGE_CURVE('',#217495,#217503,#217505,.T.); +#217503 = VERTEX_POINT('',#217504); +#217504 = CARTESIAN_POINT('',(126.952365,-65.942814,1.585)); +#217505 = LINE('',#217506,#217507); +#217506 = CARTESIAN_POINT('',(126.947926,-65.909798,1.585)); +#217507 = VECTOR('',#217508,1.); +#217508 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#217509 = ORIENTED_EDGE('',*,*,#217510,.T.); +#217510 = EDGE_CURVE('',#217503,#217511,#217513,.T.); +#217511 = VERTEX_POINT('',#217512); +#217512 = CARTESIAN_POINT('',(126.949963,-66.224343,1.585)); +#217513 = LINE('',#217514,#217515); +#217514 = CARTESIAN_POINT('',(126.952365,-65.942814,1.585)); +#217515 = VECTOR('',#217516,1.); +#217516 = DIRECTION('',(-8.531670195069E-03,-0.99996360464,0.)); +#217517 = ORIENTED_EDGE('',*,*,#217518,.T.); +#217518 = EDGE_CURVE('',#217511,#217519,#217521,.T.); +#217519 = VERTEX_POINT('',#217520); +#217520 = CARTESIAN_POINT('',(126.939168,-66.255859,1.585)); +#217521 = LINE('',#217522,#217523); +#217522 = CARTESIAN_POINT('',(126.949963,-66.224343,1.585)); +#217523 = VECTOR('',#217524,1.); +#217524 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#217525 = ORIENTED_EDGE('',*,*,#217526,.T.); +#217526 = EDGE_CURVE('',#217519,#217527,#217529,.T.); +#217527 = VERTEX_POINT('',#217528); +#217528 = CARTESIAN_POINT('',(126.8404,-66.448024,1.585)); +#217529 = LINE('',#217530,#217531); +#217530 = CARTESIAN_POINT('',(126.939168,-66.255859,1.585)); +#217531 = VECTOR('',#217532,1.); +#217532 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#217533 = ORIENTED_EDGE('',*,*,#217534,.T.); +#217534 = EDGE_CURVE('',#217527,#217535,#217537,.T.); +#217535 = VERTEX_POINT('',#217536); +#217536 = CARTESIAN_POINT('',(126.725384,-66.561033,1.585)); +#217537 = LINE('',#217538,#217539); +#217538 = CARTESIAN_POINT('',(126.8404,-66.448024,1.585)); +#217539 = VECTOR('',#217540,1.); +#217540 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#217541 = ORIENTED_EDGE('',*,*,#217542,.T.); +#217542 = EDGE_CURVE('',#217535,#217543,#217545,.T.); +#217543 = VERTEX_POINT('',#217544); +#217544 = CARTESIAN_POINT('',(126.517524,-66.663375,1.585)); +#217545 = LINE('',#217546,#217547); +#217546 = CARTESIAN_POINT('',(126.725384,-66.561033,1.585)); +#217547 = VECTOR('',#217548,1.); +#217548 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#217549 = ORIENTED_EDGE('',*,*,#217550,.T.); +#217550 = EDGE_CURVE('',#217543,#217551,#217553,.T.); +#217551 = VERTEX_POINT('',#217552); +#217552 = CARTESIAN_POINT('',(126.484508,-66.667814,1.585)); +#217553 = LINE('',#217554,#217555); +#217554 = CARTESIAN_POINT('',(126.517524,-66.663375,1.585)); +#217555 = VECTOR('',#217556,1.); +#217556 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#217557 = ORIENTED_EDGE('',*,*,#217558,.T.); +#217558 = EDGE_CURVE('',#217551,#217559,#217561,.T.); +#217559 = VERTEX_POINT('',#217560); +#217560 = CARTESIAN_POINT('',(125.774408,-66.665412,1.585)); +#217561 = LINE('',#217562,#217563); +#217562 = CARTESIAN_POINT('',(126.484508,-66.667814,1.585)); +#217563 = VECTOR('',#217564,1.); +#217564 = DIRECTION('',(-0.999994278983,3.382602813857E-03,0.)); +#217565 = ORIENTED_EDGE('',*,*,#217566,.T.); +#217566 = EDGE_CURVE('',#217559,#217567,#217569,.T.); +#217567 = VERTEX_POINT('',#217568); +#217568 = CARTESIAN_POINT('',(125.676196,-66.5672,1.585)); +#217569 = CIRCLE('',#217570,0.124998078635); +#217570 = AXIS2_PLACEMENT_3D('',#217571,#217572,#217573); +#217571 = CARTESIAN_POINT('',(125.79879254765,-66.54281545234,1.585)); +#217572 = DIRECTION('',(0.,0.,-1.)); +#217573 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#217574 = ORIENTED_EDGE('',*,*,#217575,.T.); +#217575 = EDGE_CURVE('',#217567,#217388,#217576,.T.); +#217576 = LINE('',#217577,#217578); +#217577 = CARTESIAN_POINT('',(125.676196,-66.5672,1.585)); +#217578 = VECTOR('',#217579,1.); +#217579 = DIRECTION('',(0.,1.,0.)); +#217580 = FACE_BOUND('',#217581,.F.); +#217581 = EDGE_LOOP('',(#217582,#217592,#217600,#217608,#217616,#217625, + #217633,#217641)); +#217582 = ORIENTED_EDGE('',*,*,#217583,.T.); +#217583 = EDGE_CURVE('',#217584,#217586,#217588,.T.); +#217584 = VERTEX_POINT('',#217585); +#217585 = CARTESIAN_POINT('',(126.588415,-65.794925,1.585)); +#217586 = VERTEX_POINT('',#217587); +#217587 = CARTESIAN_POINT('',(126.378511,-65.724957,1.585)); +#217588 = LINE('',#217589,#217590); +#217589 = CARTESIAN_POINT('',(126.588415,-65.794925,1.585)); +#217590 = VECTOR('',#217591,1.); +#217591 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#217592 = ORIENTED_EDGE('',*,*,#217593,.T.); +#217593 = EDGE_CURVE('',#217586,#217594,#217596,.T.); +#217594 = VERTEX_POINT('',#217595); +#217595 = CARTESIAN_POINT('',(125.923794,-65.724957,1.585)); +#217596 = LINE('',#217597,#217598); +#217597 = CARTESIAN_POINT('',(126.378511,-65.724957,1.585)); +#217598 = VECTOR('',#217599,1.); +#217599 = DIRECTION('',(-1.,0.,0.)); +#217600 = ORIENTED_EDGE('',*,*,#217601,.T.); +#217601 = EDGE_CURVE('',#217594,#217602,#217604,.T.); +#217602 = VERTEX_POINT('',#217603); +#217603 = CARTESIAN_POINT('',(125.923794,-66.417814,1.585)); +#217604 = LINE('',#217605,#217606); +#217605 = CARTESIAN_POINT('',(125.923794,-65.724957,1.585)); +#217606 = VECTOR('',#217607,1.); +#217607 = DIRECTION('',(0.,-1.,0.)); +#217608 = ORIENTED_EDGE('',*,*,#217609,.T.); +#217609 = EDGE_CURVE('',#217602,#217610,#217612,.T.); +#217610 = VERTEX_POINT('',#217611); +#217611 = CARTESIAN_POINT('',(126.454999,-66.417814,1.585)); +#217612 = LINE('',#217613,#217614); +#217613 = CARTESIAN_POINT('',(125.923794,-66.417814,1.585)); +#217614 = VECTOR('',#217615,1.); +#217615 = DIRECTION('',(1.,0.,0.)); +#217616 = ORIENTED_EDGE('',*,*,#217617,.T.); +#217617 = EDGE_CURVE('',#217610,#217618,#217620,.T.); +#217618 = VERTEX_POINT('',#217619); +#217619 = CARTESIAN_POINT('',(126.702365,-66.170448,1.585)); +#217620 = CIRCLE('',#217621,0.347641001424); +#217621 = AXIS2_PLACEMENT_3D('',#217622,#217623,#217624); +#217622 = CARTESIAN_POINT('',(126.36624460111,-66.08169360111,1.585)); +#217623 = DIRECTION('',(0.,0.,1.)); +#217624 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#217625 = ORIENTED_EDGE('',*,*,#217626,.T.); +#217626 = EDGE_CURVE('',#217618,#217627,#217629,.T.); +#217627 = VERTEX_POINT('',#217628); +#217628 = CARTESIAN_POINT('',(126.702365,-65.972322,1.585)); +#217629 = LINE('',#217630,#217631); +#217630 = CARTESIAN_POINT('',(126.702365,-66.170448,1.585)); +#217631 = VECTOR('',#217632,1.); +#217632 = DIRECTION('',(0.,1.,0.)); +#217633 = ORIENTED_EDGE('',*,*,#217634,.T.); +#217634 = EDGE_CURVE('',#217627,#217635,#217637,.T.); +#217635 = VERTEX_POINT('',#217636); +#217636 = CARTESIAN_POINT('',(126.638917,-65.845427,1.585)); +#217637 = LINE('',#217638,#217639); +#217638 = CARTESIAN_POINT('',(126.702365,-65.972322,1.585)); +#217639 = VECTOR('',#217640,1.); +#217640 = DIRECTION('',(-0.447216414918,0.894425781285,0.)); +#217641 = ORIENTED_EDGE('',*,*,#217642,.T.); +#217642 = EDGE_CURVE('',#217635,#217584,#217643,.T.); +#217643 = LINE('',#217644,#217645); +#217644 = CARTESIAN_POINT('',(126.638917,-65.845427,1.585)); +#217645 = VECTOR('',#217646,1.); +#217646 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#217647 = FACE_BOUND('',#217648,.F.); +#217648 = EDGE_LOOP('',(#217649,#217660,#217668,#217676,#217684,#217693) + ); +#217649 = ORIENTED_EDGE('',*,*,#217650,.T.); +#217650 = EDGE_CURVE('',#217651,#217653,#217655,.T.); +#217651 = VERTEX_POINT('',#217652); +#217652 = CARTESIAN_POINT('',(126.616651,-65.115179,1.585)); +#217653 = VERTEX_POINT('',#217654); +#217654 = CARTESIAN_POINT('',(126.369285,-64.867814,1.585)); +#217655 = CIRCLE('',#217656,0.347631916063); +#217656 = AXIS2_PLACEMENT_3D('',#217657,#217658,#217659); +#217657 = CARTESIAN_POINT('',(126.28053831879,-65.20392703997,1.585)); +#217658 = DIRECTION('',(0.,0.,1.)); +#217659 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#217660 = ORIENTED_EDGE('',*,*,#217661,.T.); +#217661 = EDGE_CURVE('',#217653,#217662,#217664,.T.); +#217662 = VERTEX_POINT('',#217663); +#217663 = CARTESIAN_POINT('',(125.923794,-64.867814,1.585)); +#217664 = LINE('',#217665,#217666); +#217665 = CARTESIAN_POINT('',(126.369285,-64.867814,1.585)); +#217666 = VECTOR('',#217667,1.); +#217667 = DIRECTION('',(-1.,0.,0.)); +#217668 = ORIENTED_EDGE('',*,*,#217669,.T.); +#217669 = EDGE_CURVE('',#217662,#217670,#217672,.T.); +#217670 = VERTEX_POINT('',#217671); +#217671 = CARTESIAN_POINT('',(125.923794,-65.474957,1.585)); +#217672 = LINE('',#217673,#217674); +#217673 = CARTESIAN_POINT('',(125.923794,-64.867814,1.585)); +#217674 = VECTOR('',#217675,1.); +#217675 = DIRECTION('',(0.,-1.,0.)); +#217676 = ORIENTED_EDGE('',*,*,#217677,.T.); +#217677 = EDGE_CURVE('',#217670,#217678,#217680,.T.); +#217678 = VERTEX_POINT('',#217679); +#217679 = CARTESIAN_POINT('',(126.369286,-65.474957,1.585)); +#217680 = LINE('',#217681,#217682); +#217681 = CARTESIAN_POINT('',(125.923794,-65.474957,1.585)); +#217682 = VECTOR('',#217683,1.); +#217683 = DIRECTION('',(1.,0.,0.)); +#217684 = ORIENTED_EDGE('',*,*,#217685,.T.); +#217685 = EDGE_CURVE('',#217678,#217686,#217688,.T.); +#217686 = VERTEX_POINT('',#217687); +#217687 = CARTESIAN_POINT('',(126.616651,-65.227591,1.585)); +#217688 = CIRCLE('',#217689,0.347639125489); +#217689 = AXIS2_PLACEMENT_3D('',#217690,#217691,#217692); +#217690 = CARTESIAN_POINT('',(126.28053206109,-65.13883841988,1.585)); +#217691 = DIRECTION('',(0.,0.,1.)); +#217692 = DIRECTION('',(0.255304804327,-0.966860619163,0.)); +#217693 = ORIENTED_EDGE('',*,*,#217694,.T.); +#217694 = EDGE_CURVE('',#217686,#217651,#217695,.T.); +#217695 = LINE('',#217696,#217697); +#217696 = CARTESIAN_POINT('',(126.616651,-65.227591,1.585)); +#217697 = VECTOR('',#217698,1.); +#217698 = DIRECTION('',(0.,1.,0.)); +#217699 = PLANE('',#217700); +#217700 = AXIS2_PLACEMENT_3D('',#217701,#217702,#217703); +#217701 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217702 = DIRECTION('',(0.,0.,1.)); +#217703 = DIRECTION('',(1.,0.,-0.)); +#217704 = SHELL_BASED_SURFACE_MODEL('',(#217705)); +#217705 = OPEN_SHELL('',(#217706)); +#217706 = ADVANCED_FACE('',(#217707),#217825,.T.); +#217707 = FACE_BOUND('',#217708,.F.); +#217708 = EDGE_LOOP('',(#217709,#217720,#217728,#217736,#217745,#217753, + #217761,#217770,#217778,#217786,#217794,#217803,#217811,#217819)); +#217709 = ORIENTED_EDGE('',*,*,#217710,.T.); +#217710 = EDGE_CURVE('',#217711,#217713,#217715,.T.); +#217711 = VERTEX_POINT('',#217712); +#217712 = CARTESIAN_POINT('',(132.329348,-64.63888,1.585)); +#217713 = VERTEX_POINT('',#217714); +#217714 = CARTESIAN_POINT('',(132.521392,-64.718428,1.585)); +#217715 = CIRCLE('',#217716,0.124999692383); +#217716 = AXIS2_PLACEMENT_3D('',#217717,#217718,#217719); +#217717 = CARTESIAN_POINT('',(132.398794,-64.74281351807,1.585)); +#217718 = DIRECTION('',(0.,0.,-1.)); +#217719 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#217720 = ORIENTED_EDGE('',*,*,#217721,.T.); +#217721 = EDGE_CURVE('',#217713,#217722,#217724,.T.); +#217722 = VERTEX_POINT('',#217723); +#217723 = CARTESIAN_POINT('',(132.523794,-65.469609,1.585)); +#217724 = LINE('',#217725,#217726); +#217725 = CARTESIAN_POINT('',(132.521392,-64.718428,1.585)); +#217726 = VECTOR('',#217727,1.); +#217727 = DIRECTION('',(3.197615115492E-03,-0.999994887616,0.)); +#217728 = ORIENTED_EDGE('',*,*,#217729,.T.); +#217729 = EDGE_CURVE('',#217722,#217730,#217732,.T.); +#217730 = VERTEX_POINT('',#217731); +#217731 = CARTESIAN_POINT('',(133.357919,-64.638881,1.585)); +#217732 = LINE('',#217733,#217734); +#217733 = CARTESIAN_POINT('',(132.523794,-65.469609,1.585)); +#217734 = VECTOR('',#217735,1.); +#217735 = DIRECTION('',(0.708548101325,0.705662517149,0.)); +#217736 = ORIENTED_EDGE('',*,*,#217737,.T.); +#217737 = EDGE_CURVE('',#217730,#217738,#217740,.T.); +#217738 = VERTEX_POINT('',#217739); +#217739 = CARTESIAN_POINT('',(133.531298,-64.81226,1.585)); +#217740 = CIRCLE('',#217741,0.124999261618); +#217741 = AXIS2_PLACEMENT_3D('',#217742,#217743,#217744); +#217742 = CARTESIAN_POINT('',(133.427365,-64.742814,1.585)); +#217743 = DIRECTION('',(0.,0.,-1.)); +#217744 = DIRECTION('',(-0.555571281791,0.831468911535,0.)); +#217745 = ORIENTED_EDGE('',*,*,#217746,.T.); +#217746 = EDGE_CURVE('',#217738,#217747,#217749,.T.); +#217747 = VERTEX_POINT('',#217748); +#217748 = CARTESIAN_POINT('',(132.820983,-65.525971,1.585)); +#217749 = LINE('',#217750,#217751); +#217750 = CARTESIAN_POINT('',(133.531298,-64.81226,1.585)); +#217751 = VECTOR('',#217752,1.); +#217752 = DIRECTION('',(-0.705418475548,-0.708791065375,0.)); +#217753 = ORIENTED_EDGE('',*,*,#217754,.T.); +#217754 = EDGE_CURVE('',#217747,#217755,#217757,.T.); +#217755 = VERTEX_POINT('',#217756); +#217756 = CARTESIAN_POINT('',(133.540075,-66.488764,1.585)); +#217757 = LINE('',#217758,#217759); +#217758 = CARTESIAN_POINT('',(132.820983,-65.525971,1.585)); +#217759 = VECTOR('',#217760,1.); +#217760 = DIRECTION('',(0.598399589404,-0.801197810407,0.)); +#217761 = ORIENTED_EDGE('',*,*,#217762,.T.); +#217762 = EDGE_CURVE('',#217755,#217763,#217765,.T.); +#217763 = VERTEX_POINT('',#217764); +#217764 = CARTESIAN_POINT('',(133.343918,-66.635881,1.585)); +#217765 = CIRCLE('',#217766,0.124999676414); +#217766 = AXIS2_PLACEMENT_3D('',#217767,#217768,#217769); +#217767 = CARTESIAN_POINT('',(133.42736498436,-66.54281371302,1.585)); +#217768 = DIRECTION('',(0.,0.,-1.)); +#217769 = DIRECTION('',(0.901682459294,0.432398823544,0.)); +#217770 = ORIENTED_EDGE('',*,*,#217771,.T.); +#217771 = EDGE_CURVE('',#217763,#217772,#217774,.T.); +#217772 = VERTEX_POINT('',#217773); +#217773 = CARTESIAN_POINT('',(132.642412,-65.704542,1.585)); +#217774 = LINE('',#217775,#217776); +#217775 = CARTESIAN_POINT('',(133.343918,-66.635881,1.585)); +#217776 = VECTOR('',#217777,1.); +#217777 = DIRECTION('',(-0.601646375358,0.798762567362,0.)); +#217778 = ORIENTED_EDGE('',*,*,#217779,.T.); +#217779 = EDGE_CURVE('',#217772,#217780,#217782,.T.); +#217780 = VERTEX_POINT('',#217781); +#217781 = CARTESIAN_POINT('',(132.523794,-65.823161,1.585)); +#217782 = LINE('',#217783,#217784); +#217783 = CARTESIAN_POINT('',(132.642412,-65.704542,1.585)); +#217784 = VECTOR('',#217785,1.); +#217785 = DIRECTION('',(-0.707103800588,-0.707109761773,0.)); +#217786 = ORIENTED_EDGE('',*,*,#217787,.T.); +#217787 = EDGE_CURVE('',#217780,#217788,#217790,.T.); +#217788 = VERTEX_POINT('',#217789); +#217789 = CARTESIAN_POINT('',(132.521392,-66.5672,1.585)); +#217790 = LINE('',#217791,#217792); +#217791 = CARTESIAN_POINT('',(132.523794,-65.823161,1.585)); +#217792 = VECTOR('',#217793,1.); +#217793 = DIRECTION('',(-3.228308574136E-03,-0.999994788998,0.)); +#217794 = ORIENTED_EDGE('',*,*,#217795,.T.); +#217795 = EDGE_CURVE('',#217788,#217796,#217798,.T.); +#217796 = VERTEX_POINT('',#217797); +#217797 = CARTESIAN_POINT('',(132.276196,-66.5672,1.585)); +#217798 = CIRCLE('',#217799,0.1249997864); +#217799 = AXIS2_PLACEMENT_3D('',#217800,#217801,#217802); +#217800 = CARTESIAN_POINT('',(132.398794,-66.542814,1.585)); +#217801 = DIRECTION('',(-0.,0.,-1.)); +#217802 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#217803 = ORIENTED_EDGE('',*,*,#217804,.T.); +#217804 = EDGE_CURVE('',#217796,#217805,#217807,.T.); +#217805 = VERTEX_POINT('',#217806); +#217806 = CARTESIAN_POINT('',(132.276196,-64.718428,1.585)); +#217807 = LINE('',#217808,#217809); +#217808 = CARTESIAN_POINT('',(132.276196,-66.5672,1.585)); +#217809 = VECTOR('',#217810,1.); +#217810 = DIRECTION('',(0.,1.,0.)); +#217811 = ORIENTED_EDGE('',*,*,#217812,.T.); +#217812 = EDGE_CURVE('',#217805,#217813,#217815,.T.); +#217813 = VERTEX_POINT('',#217814); +#217814 = CARTESIAN_POINT('',(132.29486,-64.673368,1.585)); +#217815 = LINE('',#217816,#217817); +#217816 = CARTESIAN_POINT('',(132.276196,-64.718428,1.585)); +#217817 = VECTOR('',#217818,1.); +#217818 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#217819 = ORIENTED_EDGE('',*,*,#217820,.T.); +#217820 = EDGE_CURVE('',#217813,#217711,#217821,.T.); +#217821 = LINE('',#217822,#217823); +#217822 = CARTESIAN_POINT('',(132.29486,-64.673368,1.585)); +#217823 = VECTOR('',#217824,1.); +#217824 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#217825 = PLANE('',#217826); +#217826 = AXIS2_PLACEMENT_3D('',#217827,#217828,#217829); +#217827 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217828 = DIRECTION('',(0.,0.,1.)); +#217829 = DIRECTION('',(1.,0.,-0.)); +#217830 = SHELL_BASED_SURFACE_MODEL('',(#217831)); +#217831 = OPEN_SHELL('',(#217832)); +#217832 = ADVANCED_FACE('',(#217833,#217934),#217960,.T.); +#217833 = FACE_BOUND('',#217834,.F.); +#217834 = EDGE_LOOP('',(#217835,#217846,#217854,#217862,#217870,#217878, + #217886,#217895,#217903,#217911,#217919,#217928)); +#217835 = ORIENTED_EDGE('',*,*,#217836,.T.); +#217836 = EDGE_CURVE('',#217837,#217839,#217841,.T.); +#217837 = VERTEX_POINT('',#217838); +#217838 = CARTESIAN_POINT('',(129.290199,-64.68091,1.585)); +#217839 = VERTEX_POINT('',#217840); +#217840 = CARTESIAN_POINT('',(129.414428,-64.618795,1.585)); +#217841 = CIRCLE('',#217842,0.124999669127); +#217842 = AXIS2_PLACEMENT_3D('',#217843,#217844,#217845); +#217843 = CARTESIAN_POINT('',(129.3987941992,-64.7428131501,1.585)); +#217844 = DIRECTION('',(0.,0.,-1.)); +#217845 = DIRECTION('',(-0.868763893211,0.495226511663,0.)); +#217846 = ORIENTED_EDGE('',*,*,#217847,.T.); +#217847 = EDGE_CURVE('',#217839,#217848,#217850,.T.); +#217848 = VERTEX_POINT('',#217849); +#217849 = CARTESIAN_POINT('',(129.422903,-64.62162,1.585)); +#217850 = LINE('',#217851,#217852); +#217851 = CARTESIAN_POINT('',(129.414428,-64.618795,1.585)); +#217852 = VECTOR('',#217853,1.); +#217853 = DIRECTION('',(0.948683298051,-0.316227766015,0.)); +#217854 = ORIENTED_EDGE('',*,*,#217855,.T.); +#217855 = EDGE_CURVE('',#217848,#217856,#217858,.T.); +#217856 = VERTEX_POINT('',#217857); +#217857 = CARTESIAN_POINT('',(129.467447,-64.640071,1.585)); +#217858 = LINE('',#217859,#217860); +#217859 = CARTESIAN_POINT('',(129.422903,-64.62162,1.585)); +#217860 = VECTOR('',#217861,1.); +#217861 = DIRECTION('',(0.923877544693,-0.382688231348,0.)); +#217862 = ORIENTED_EDGE('',*,*,#217863,.T.); +#217863 = EDGE_CURVE('',#217856,#217864,#217866,.T.); +#217864 = VERTEX_POINT('',#217865); +#217865 = CARTESIAN_POINT('',(129.501538,-64.674165,1.585)); +#217866 = LINE('',#217867,#217868); +#217867 = CARTESIAN_POINT('',(129.467447,-64.640071,1.585)); +#217868 = VECTOR('',#217869,1.); +#217869 = DIRECTION('',(0.707075669256,-0.707137891748,0.)); +#217870 = ORIENTED_EDGE('',*,*,#217871,.T.); +#217871 = EDGE_CURVE('',#217864,#217872,#217874,.T.); +#217872 = VERTEX_POINT('',#217873); +#217873 = CARTESIAN_POINT('',(129.517379,-64.703286,1.585)); +#217874 = LINE('',#217875,#217876); +#217875 = CARTESIAN_POINT('',(129.501538,-64.674165,1.585)); +#217876 = VECTOR('',#217877,1.); +#217877 = DIRECTION('',(0.477847909994,-0.878442584871,0.)); +#217878 = ORIENTED_EDGE('',*,*,#217879,.T.); +#217879 = EDGE_CURVE('',#217872,#217880,#217882,.T.); +#217880 = VERTEX_POINT('',#217881); +#217881 = CARTESIAN_POINT('',(130.122812,-66.52718,1.585)); +#217882 = LINE('',#217883,#217884); +#217883 = CARTESIAN_POINT('',(129.517379,-64.703286,1.585)); +#217884 = VECTOR('',#217885,1.); +#217885 = DIRECTION('',(0.315041883433,-0.949077769038,0.)); +#217886 = ORIENTED_EDGE('',*,*,#217887,.T.); +#217887 = EDGE_CURVE('',#217880,#217888,#217890,.T.); +#217888 = VERTEX_POINT('',#217889); +#217889 = CARTESIAN_POINT('',(129.890199,-66.604718,1.585)); +#217890 = CIRCLE('',#217891,0.124999459985); +#217891 = AXIS2_PLACEMENT_3D('',#217892,#217893,#217894); +#217892 = CARTESIAN_POINT('',(129.99879425953,-66.54281537806,1.585)); +#217893 = DIRECTION('',(0.,0.,-1.)); +#217894 = DIRECTION('',(0.992146209888,0.12508356489,0.)); +#217895 = ORIENTED_EDGE('',*,*,#217896,.T.); +#217896 = EDGE_CURVE('',#217888,#217897,#217899,.T.); +#217897 = VERTEX_POINT('',#217898); +#217898 = CARTESIAN_POINT('',(129.737271,-66.153528,1.585)); +#217899 = LINE('',#217900,#217901); +#217900 = CARTESIAN_POINT('',(129.890199,-66.604718,1.585)); +#217901 = VECTOR('',#217902,1.); +#217902 = DIRECTION('',(-0.321005838701,0.947077215184,0.)); +#217903 = ORIENTED_EDGE('',*,*,#217904,.T.); +#217904 = EDGE_CURVE('',#217897,#217905,#217907,.T.); +#217905 = VERTEX_POINT('',#217906); +#217906 = CARTESIAN_POINT('',(129.060317,-66.153528,1.585)); +#217907 = LINE('',#217908,#217909); +#217908 = CARTESIAN_POINT('',(129.737271,-66.153528,1.585)); +#217909 = VECTOR('',#217910,1.); +#217910 = DIRECTION('',(-1.,0.,0.)); +#217911 = ORIENTED_EDGE('',*,*,#217912,.T.); +#217912 = EDGE_CURVE('',#217905,#217913,#217915,.T.); +#217913 = VERTEX_POINT('',#217914); +#217914 = CARTESIAN_POINT('',(128.907389,-66.604717,1.585)); +#217915 = LINE('',#217916,#217917); +#217916 = CARTESIAN_POINT('',(129.060317,-66.153528,1.585)); +#217917 = VECTOR('',#217918,1.); +#217918 = DIRECTION('',(-0.321006476855,-0.947076998885,0.)); +#217919 = ORIENTED_EDGE('',*,*,#217920,.T.); +#217920 = EDGE_CURVE('',#217913,#217921,#217923,.T.); +#217921 = VERTEX_POINT('',#217922); +#217922 = CARTESIAN_POINT('',(128.674776,-66.52718,1.585)); +#217923 = CIRCLE('',#217924,0.124999465062); +#217924 = AXIS2_PLACEMENT_3D('',#217925,#217926,#217927); +#217925 = CARTESIAN_POINT('',(128.79879391055,-66.54281406941,1.585)); +#217926 = DIRECTION('',(-0.,0.,-1.)); +#217927 = DIRECTION('',(0.868764433415,-0.495225563995,-0.)); +#217928 = ORIENTED_EDGE('',*,*,#217929,.T.); +#217929 = EDGE_CURVE('',#217921,#217837,#217930,.T.); +#217930 = LINE('',#217931,#217932); +#217931 = CARTESIAN_POINT('',(128.674776,-66.52718,1.585)); +#217932 = VECTOR('',#217933,1.); +#217933 = DIRECTION('',(0.316227611865,0.948683349434,0.)); +#217934 = FACE_BOUND('',#217935,.F.); +#217935 = EDGE_LOOP('',(#217936,#217946,#217954)); +#217936 = ORIENTED_EDGE('',*,*,#217937,.T.); +#217937 = EDGE_CURVE('',#217938,#217940,#217942,.T.); +#217938 = VERTEX_POINT('',#217939); +#217939 = CARTESIAN_POINT('',(129.143651,-65.903528,1.585)); +#217940 = VERTEX_POINT('',#217941); +#217941 = CARTESIAN_POINT('',(129.653937,-65.903528,1.585)); +#217942 = LINE('',#217943,#217944); +#217943 = CARTESIAN_POINT('',(129.143651,-65.903528,1.585)); +#217944 = VECTOR('',#217945,1.); +#217945 = DIRECTION('',(1.,0.,0.)); +#217946 = ORIENTED_EDGE('',*,*,#217947,.T.); +#217947 = EDGE_CURVE('',#217940,#217948,#217950,.T.); +#217948 = VERTEX_POINT('',#217949); +#217949 = CARTESIAN_POINT('',(129.398794,-65.138098,1.585)); +#217950 = LINE('',#217951,#217952); +#217951 = CARTESIAN_POINT('',(129.653937,-65.903528,1.585)); +#217952 = VECTOR('',#217953,1.); +#217953 = DIRECTION('',(-0.316227394193,0.948683421992,0.)); +#217954 = ORIENTED_EDGE('',*,*,#217955,.T.); +#217955 = EDGE_CURVE('',#217948,#217938,#217956,.T.); +#217956 = LINE('',#217957,#217958); +#217957 = CARTESIAN_POINT('',(129.398794,-65.138098,1.585)); +#217958 = VECTOR('',#217959,1.); +#217959 = DIRECTION('',(-0.316227394193,-0.948683421992,0.)); +#217960 = PLANE('',#217961); +#217961 = AXIS2_PLACEMENT_3D('',#217962,#217963,#217964); +#217962 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217963 = DIRECTION('',(0.,0.,1.)); +#217964 = DIRECTION('',(1.,0.,-0.)); +#217965 = SHELL_BASED_SURFACE_MODEL('',(#217966)); +#217966 = OPEN_SHELL('',(#217967)); +#217967 = ADVANCED_FACE('',(#217968),#218215,.T.); +#217968 = FACE_BOUND('',#217969,.F.); +#217969 = EDGE_LOOP('',(#217970,#217980,#217988,#217996,#218004,#218012, + #218020,#218028,#218037,#218045,#218054,#218062,#218070,#218079, + #218087,#218096,#218104,#218113,#218121,#218129,#218137,#218145, + #218153,#218161,#218169,#218177,#218185,#218193,#218201,#218209)); +#217970 = ORIENTED_EDGE('',*,*,#217971,.T.); +#217971 = EDGE_CURVE('',#217972,#217974,#217976,.T.); +#217972 = VERTEX_POINT('',#217973); +#217973 = CARTESIAN_POINT('',(130.78649,-64.724595,1.585)); +#217974 = VERTEX_POINT('',#217975); +#217975 = CARTESIAN_POINT('',(130.816409,-64.709943,1.585)); +#217976 = LINE('',#217977,#217978); +#217977 = CARTESIAN_POINT('',(130.78649,-64.724595,1.585)); +#217978 = VECTOR('',#217979,1.); +#217979 = DIRECTION('',(0.898088841756,0.439814088352,0.)); +#217980 = ORIENTED_EDGE('',*,*,#217981,.T.); +#217981 = EDGE_CURVE('',#217974,#217982,#217984,.T.); +#217982 = VERTEX_POINT('',#217983); +#217983 = CARTESIAN_POINT('',(131.097445,-64.618796,1.585)); +#217984 = LINE('',#217985,#217986); +#217985 = CARTESIAN_POINT('',(130.816409,-64.709943,1.585)); +#217986 = VECTOR('',#217987,1.); +#217987 = DIRECTION('',(0.951222631034,0.308505277441,0.)); +#217988 = ORIENTED_EDGE('',*,*,#217989,.T.); +#217989 = EDGE_CURVE('',#217982,#217990,#217992,.T.); +#217990 = VERTEX_POINT('',#217991); +#217991 = CARTESIAN_POINT('',(131.296851,-64.619029,1.585)); +#217992 = LINE('',#217993,#217994); +#217993 = CARTESIAN_POINT('',(131.097445,-64.618796,1.585)); +#217994 = VECTOR('',#217995,1.); +#217995 = DIRECTION('',(0.999999317339,-1.168469559263E-03,0.)); +#217996 = ORIENTED_EDGE('',*,*,#217997,.T.); +#217997 = EDGE_CURVE('',#217990,#217998,#218000,.T.); +#217998 = VERTEX_POINT('',#217999); +#217999 = CARTESIAN_POINT('',(131.324036,-64.624229,1.585)); +#218000 = LINE('',#218001,#218002); +#218001 = CARTESIAN_POINT('',(131.296851,-64.619029,1.585)); +#218002 = VECTOR('',#218003,1.); +#218003 = DIRECTION('',(0.982192801029,-0.187875761094,0.)); +#218004 = ORIENTED_EDGE('',*,*,#218005,.T.); +#218005 = EDGE_CURVE('',#217998,#218006,#218008,.T.); +#218006 = VERTEX_POINT('',#218007); +#218007 = CARTESIAN_POINT('',(131.603554,-64.719933,1.585)); +#218008 = LINE('',#218009,#218010); +#218009 = CARTESIAN_POINT('',(131.324036,-64.624229,1.585)); +#218010 = VECTOR('',#218011,1.); +#218011 = DIRECTION('',(0.946081626447,-0.323928319384,0.)); +#218012 = ORIENTED_EDGE('',*,*,#218013,.T.); +#218013 = EDGE_CURVE('',#218006,#218014,#218016,.T.); +#218014 = VERTEX_POINT('',#218015); +#218015 = CARTESIAN_POINT('',(131.630039,-64.74014,1.585)); +#218016 = LINE('',#218017,#218018); +#218017 = CARTESIAN_POINT('',(131.603554,-64.719933,1.585)); +#218018 = VECTOR('',#218019,1.); +#218019 = DIRECTION('',(0.795027053382,-0.606573972728,0.)); +#218020 = ORIENTED_EDGE('',*,*,#218021,.T.); +#218021 = EDGE_CURVE('',#218014,#218022,#218024,.T.); +#218022 = VERTEX_POINT('',#218023); +#218023 = CARTESIAN_POINT('',(131.731298,-64.844796,1.585)); +#218024 = LINE('',#218025,#218026); +#218025 = CARTESIAN_POINT('',(131.630039,-64.74014,1.585)); +#218026 = VECTOR('',#218027,1.); +#218027 = DIRECTION('',(0.695346956718,-0.718674202809,0.)); +#218028 = ORIENTED_EDGE('',*,*,#218029,.T.); +#218029 = EDGE_CURVE('',#218022,#218030,#218032,.T.); +#218030 = VERTEX_POINT('',#218031); +#218031 = CARTESIAN_POINT('',(131.557919,-65.018175,1.585)); +#218032 = CIRCLE('',#218033,0.124999261618); +#218033 = AXIS2_PLACEMENT_3D('',#218034,#218035,#218036); +#218034 = CARTESIAN_POINT('',(131.627365,-64.914242,1.585)); +#218035 = DIRECTION('',(0.,0.,-1.)); +#218036 = DIRECTION('',(0.831468911535,0.555571281791,0.)); +#218037 = ORIENTED_EDGE('',*,*,#218038,.T.); +#218038 = EDGE_CURVE('',#218030,#218039,#218041,.T.); +#218039 = VERTEX_POINT('',#218040); +#218040 = CARTESIAN_POINT('',(131.474129,-64.937782,1.585)); +#218041 = LINE('',#218042,#218043); +#218042 = CARTESIAN_POINT('',(131.557919,-65.018175,1.585)); +#218043 = VECTOR('',#218044,1.); +#218044 = DIRECTION('',(-0.721582617399,0.69232833704,0.)); +#218045 = ORIENTED_EDGE('',*,*,#218046,.T.); +#218046 = EDGE_CURVE('',#218039,#218047,#218049,.T.); +#218047 = VERTEX_POINT('',#218048); +#218048 = CARTESIAN_POINT('',(130.92346,-64.937781,1.585)); +#218049 = CIRCLE('',#218050,0.550039736968); +#218050 = AXIS2_PLACEMENT_3D('',#218051,#218052,#218053); +#218051 = CARTESIAN_POINT('',(131.19879363529,-65.41394809411,1.585)); +#218052 = DIRECTION('',(0.,0.,1.)); +#218053 = DIRECTION('',(0.500573588052,0.865693989204,-0.)); +#218054 = ORIENTED_EDGE('',*,*,#218055,.T.); +#218055 = EDGE_CURVE('',#218047,#218056,#218058,.T.); +#218056 = VERTEX_POINT('',#218057); +#218057 = CARTESIAN_POINT('',(130.787239,-65.074001,1.585)); +#218058 = LINE('',#218059,#218060); +#218059 = CARTESIAN_POINT('',(130.92346,-64.937781,1.585)); +#218060 = VECTOR('',#218061,1.); +#218061 = DIRECTION('',(-0.707109376631,-0.707104185733,0.)); +#218062 = ORIENTED_EDGE('',*,*,#218063,.T.); +#218063 = EDGE_CURVE('',#218056,#218064,#218066,.T.); +#218064 = VERTEX_POINT('',#218065); +#218065 = CARTESIAN_POINT('',(130.716734,-65.215011,1.585)); +#218066 = LINE('',#218067,#218068); +#218067 = CARTESIAN_POINT('',(130.787239,-65.074001,1.585)); +#218068 = VECTOR('',#218069,1.); +#218069 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#218070 = ORIENTED_EDGE('',*,*,#218071,.T.); +#218071 = EDGE_CURVE('',#218064,#218072,#218074,.T.); +#218072 = VERTEX_POINT('',#218073); +#218073 = CARTESIAN_POINT('',(130.78724,-66.211627,1.585)); +#218074 = CIRCLE('',#218075,1.123544903385); +#218075 = AXIS2_PLACEMENT_3D('',#218076,#218077,#218078); +#218076 = CARTESIAN_POINT('',(131.75585740202,-65.6422997844,1.585)); +#218077 = DIRECTION('',(0.,0.,1.)); +#218078 = DIRECTION('',(-0.924861479854,0.380304145497,0.)); +#218079 = ORIENTED_EDGE('',*,*,#218080,.T.); +#218080 = EDGE_CURVE('',#218072,#218081,#218083,.T.); +#218081 = VERTEX_POINT('',#218082); +#218082 = CARTESIAN_POINT('',(130.92346,-66.347846,1.585)); +#218083 = LINE('',#218084,#218085); +#218084 = CARTESIAN_POINT('',(130.78724,-66.211627,1.585)); +#218085 = VECTOR('',#218086,1.); +#218086 = DIRECTION('',(0.70710937665,-0.707104185714,0.)); +#218087 = ORIENTED_EDGE('',*,*,#218088,.T.); +#218088 = EDGE_CURVE('',#218081,#218089,#218091,.T.); +#218089 = VERTEX_POINT('',#218090); +#218090 = CARTESIAN_POINT('',(131.474127,-66.347846,1.585)); +#218091 = CIRCLE('',#218092,0.550035579809); +#218092 = AXIS2_PLACEMENT_3D('',#218093,#218094,#218095); +#218093 = CARTESIAN_POINT('',(131.1987935,-65.87168362975,1.585)); +#218094 = DIRECTION('',(0.,0.,1.)); +#218095 = DIRECTION('',(-0.500573981225,-0.865693761859,0.)); +#218096 = ORIENTED_EDGE('',*,*,#218097,.T.); +#218097 = EDGE_CURVE('',#218089,#218098,#218100,.T.); +#218098 = VERTEX_POINT('',#218099); +#218099 = CARTESIAN_POINT('',(131.557918,-66.267452,1.585)); +#218100 = LINE('',#218101,#218102); +#218101 = CARTESIAN_POINT('',(131.474127,-66.347846,1.585)); +#218102 = VECTOR('',#218103,1.); +#218103 = DIRECTION('',(0.721582442981,0.692328518827,0.)); +#218104 = ORIENTED_EDGE('',*,*,#218105,.T.); +#218105 = EDGE_CURVE('',#218098,#218106,#218108,.T.); +#218106 = VERTEX_POINT('',#218107); +#218107 = CARTESIAN_POINT('',(131.731299,-66.44083,1.585)); +#218108 = CIRCLE('',#218109,0.124999581037); +#218109 = AXIS2_PLACEMENT_3D('',#218110,#218111,#218112); +#218110 = CARTESIAN_POINT('',(131.62736524829,-66.37138455006,1.585)); +#218111 = DIRECTION('',(0.,0.,-1.)); +#218112 = DIRECTION('',(-0.555579848504,0.831463187361,0.)); +#218113 = ORIENTED_EDGE('',*,*,#218114,.T.); +#218114 = EDGE_CURVE('',#218106,#218115,#218117,.T.); +#218115 = VERTEX_POINT('',#218116); +#218116 = CARTESIAN_POINT('',(131.611098,-66.561033,1.585)); +#218117 = LINE('',#218118,#218119); +#218118 = CARTESIAN_POINT('',(131.731299,-66.44083,1.585)); +#218119 = VECTOR('',#218120,1.); +#218120 = DIRECTION('',(-0.707100898508,-0.707112663816,0.)); +#218121 = ORIENTED_EDGE('',*,*,#218122,.T.); +#218122 = EDGE_CURVE('',#218115,#218123,#218125,.T.); +#218123 = VERTEX_POINT('',#218124); +#218124 = CARTESIAN_POINT('',(131.581179,-66.575686,1.585)); +#218125 = LINE('',#218126,#218127); +#218126 = CARTESIAN_POINT('',(131.611098,-66.561033,1.585)); +#218127 = VECTOR('',#218128,1.); +#218128 = DIRECTION('',(-0.898076984973,-0.439838298767,0.)); +#218129 = ORIENTED_EDGE('',*,*,#218130,.T.); +#218130 = EDGE_CURVE('',#218123,#218131,#218133,.T.); +#218131 = VERTEX_POINT('',#218132); +#218132 = CARTESIAN_POINT('',(131.300142,-66.666832,1.585)); +#218133 = LINE('',#218134,#218135); +#218134 = CARTESIAN_POINT('',(131.581179,-66.575686,1.585)); +#218135 = VECTOR('',#218136,1.); +#218136 = DIRECTION('',(-0.951223946428,-0.308501221622,0.)); +#218137 = ORIENTED_EDGE('',*,*,#218138,.T.); +#218138 = EDGE_CURVE('',#218131,#218139,#218141,.T.); +#218139 = VERTEX_POINT('',#218140); +#218140 = CARTESIAN_POINT('',(131.088694,-66.665412,1.585)); +#218141 = LINE('',#218142,#218143); +#218142 = CARTESIAN_POINT('',(131.300142,-66.666832,1.585)); +#218143 = VECTOR('',#218144,1.); +#218144 = DIRECTION('',(-0.999977451127,6.715447677899E-03,0.)); +#218145 = ORIENTED_EDGE('',*,*,#218146,.T.); +#218146 = EDGE_CURVE('',#218139,#218147,#218149,.T.); +#218147 = VERTEX_POINT('',#218148); +#218148 = CARTESIAN_POINT('',(130.794034,-66.565695,1.585)); +#218149 = LINE('',#218150,#218151); +#218150 = CARTESIAN_POINT('',(131.088694,-66.665412,1.585)); +#218151 = VECTOR('',#218152,1.); +#218152 = DIRECTION('',(-0.947229710679,0.320555572727,0.)); +#218153 = ORIENTED_EDGE('',*,*,#218154,.T.); +#218154 = EDGE_CURVE('',#218147,#218155,#218157,.T.); +#218155 = VERTEX_POINT('',#218156); +#218156 = CARTESIAN_POINT('',(130.767548,-66.545488,1.585)); +#218157 = LINE('',#218158,#218159); +#218158 = CARTESIAN_POINT('',(130.794034,-66.565695,1.585)); +#218159 = VECTOR('',#218160,1.); +#218160 = DIRECTION('',(-0.795038097574,0.606559497005,0.)); +#218161 = ORIENTED_EDGE('',*,*,#218162,.T.); +#218162 = EDGE_CURVE('',#218155,#218163,#218165,.T.); +#218163 = VERTEX_POINT('',#218164); +#218164 = CARTESIAN_POINT('',(130.580575,-66.355117,1.585)); +#218165 = LINE('',#218166,#218167); +#218166 = CARTESIAN_POINT('',(130.767548,-66.545488,1.585)); +#218167 = VECTOR('',#218168,1.); +#218168 = DIRECTION('',(-0.700710842198,0.713445383772,0.)); +#218169 = ORIENTED_EDGE('',*,*,#218170,.T.); +#218170 = EDGE_CURVE('',#218163,#218171,#218173,.T.); +#218171 = VERTEX_POINT('',#218172); +#218172 = CARTESIAN_POINT('',(130.477526,-66.144559,1.585)); +#218173 = LINE('',#218174,#218175); +#218174 = CARTESIAN_POINT('',(130.580575,-66.355117,1.585)); +#218175 = VECTOR('',#218176,1.); +#218176 = DIRECTION('',(-0.439587206682,0.898199915231,0.)); +#218177 = ORIENTED_EDGE('',*,*,#218178,.T.); +#218178 = EDGE_CURVE('',#218171,#218179,#218181,.T.); +#218179 = VERTEX_POINT('',#218180); +#218180 = CARTESIAN_POINT('',(130.388499,-65.775639,1.585)); +#218181 = LINE('',#218182,#218183); +#218182 = CARTESIAN_POINT('',(130.477526,-66.144559,1.585)); +#218183 = VECTOR('',#218184,1.); +#218184 = DIRECTION('',(-0.23458412347,0.97209582296,0.)); +#218185 = ORIENTED_EDGE('',*,*,#218186,.T.); +#218186 = EDGE_CURVE('',#218179,#218187,#218189,.T.); +#218187 = VERTEX_POINT('',#218188); +#218188 = CARTESIAN_POINT('',(130.391186,-65.488154,1.585)); +#218189 = LINE('',#218190,#218191); +#218190 = CARTESIAN_POINT('',(130.388499,-65.775639,1.585)); +#218191 = VECTOR('',#218192,1.); +#218192 = DIRECTION('',(9.346166379502E-03,0.999956323633,0.)); +#218193 = ORIENTED_EDGE('',*,*,#218194,.T.); +#218194 = EDGE_CURVE('',#218187,#218195,#218197,.T.); +#218195 = VERTEX_POINT('',#218196); +#218196 = CARTESIAN_POINT('',(130.486991,-65.115483,1.585)); +#218197 = LINE('',#218198,#218199); +#218198 = CARTESIAN_POINT('',(130.391186,-65.488154,1.585)); +#218199 = VECTOR('',#218200,1.); +#218200 = DIRECTION('',(0.248980864287,0.96850840431,0.)); +#218201 = ORIENTED_EDGE('',*,*,#218202,.T.); +#218202 = EDGE_CURVE('',#218195,#218203,#218205,.T.); +#218203 = VERTEX_POINT('',#218204); +#218204 = CARTESIAN_POINT('',(130.585759,-64.923318,1.585)); +#218205 = LINE('',#218206,#218207); +#218206 = CARTESIAN_POINT('',(130.486991,-65.115483,1.585)); +#218207 = VECTOR('',#218208,1.); +#218208 = DIRECTION('',(0.457129431181,0.889400181666,0.)); +#218209 = ORIENTED_EDGE('',*,*,#218210,.T.); +#218210 = EDGE_CURVE('',#218203,#217972,#218211,.T.); +#218211 = LINE('',#218212,#218213); +#218212 = CARTESIAN_POINT('',(130.585759,-64.923318,1.585)); +#218213 = VECTOR('',#218214,1.); +#218214 = DIRECTION('',(0.710652330358,0.703543364233,0.)); +#218215 = PLANE('',#218216); +#218216 = AXIS2_PLACEMENT_3D('',#218217,#218218,#218219); +#218217 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218218 = DIRECTION('',(0.,0.,1.)); +#218219 = DIRECTION('',(1.,0.,-0.)); +#218220 = SHELL_BASED_SURFACE_MODEL('',(#218221)); +#218221 = OPEN_SHELL('',(#218222)); +#218222 = ADVANCED_FACE('',(#218223),#218292,.T.); +#218223 = FACE_BOUND('',#218224,.F.); +#218224 = EDGE_LOOP('',(#218225,#218236,#218244,#218253,#218261,#218269, + #218278,#218286)); +#218225 = ORIENTED_EDGE('',*,*,#218226,.T.); +#218226 = EDGE_CURVE('',#218227,#218229,#218231,.T.); +#218227 = VERTEX_POINT('',#218228); +#218228 = CARTESIAN_POINT('',(110.602977,-64.865412,1.585)); +#218229 = VERTEX_POINT('',#218230); +#218230 = CARTESIAN_POINT('',(110.602977,-64.620216,1.585)); +#218231 = CIRCLE('',#218232,0.1249997864); +#218232 = AXIS2_PLACEMENT_3D('',#218233,#218234,#218235); +#218233 = CARTESIAN_POINT('',(110.627363,-64.742814,1.585)); +#218234 = DIRECTION('',(0.,0.,-1.)); +#218235 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#218236 = ORIENTED_EDGE('',*,*,#218237,.T.); +#218237 = EDGE_CURVE('',#218229,#218238,#218240,.T.); +#218238 = VERTEX_POINT('',#218239); +#218239 = CARTESIAN_POINT('',(111.680321,-64.620216,1.585)); +#218240 = LINE('',#218241,#218242); +#218241 = CARTESIAN_POINT('',(110.602977,-64.620216,1.585)); +#218242 = VECTOR('',#218243,1.); +#218243 = DIRECTION('',(1.,0.,0.)); +#218244 = ORIENTED_EDGE('',*,*,#218245,.T.); +#218245 = EDGE_CURVE('',#218238,#218246,#218248,.T.); +#218246 = VERTEX_POINT('',#218247); +#218247 = CARTESIAN_POINT('',(111.680321,-64.865412,1.585)); +#218248 = CIRCLE('',#218249,0.1249997864); +#218249 = AXIS2_PLACEMENT_3D('',#218250,#218251,#218252); +#218250 = CARTESIAN_POINT('',(111.655935,-64.742814,1.585)); +#218251 = DIRECTION('',(0.,0.,-1.)); +#218252 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218253 = ORIENTED_EDGE('',*,*,#218254,.T.); +#218254 = EDGE_CURVE('',#218246,#218255,#218257,.T.); +#218255 = VERTEX_POINT('',#218256); +#218256 = CARTESIAN_POINT('',(111.266649,-64.867814,1.585)); +#218257 = LINE('',#218258,#218259); +#218258 = CARTESIAN_POINT('',(111.680321,-64.865412,1.585)); +#218259 = VECTOR('',#218260,1.); +#218260 = DIRECTION('',(-0.999983142515,-5.806434828344E-03,0.)); +#218261 = ORIENTED_EDGE('',*,*,#218262,.T.); +#218262 = EDGE_CURVE('',#218255,#218263,#218265,.T.); +#218263 = VERTEX_POINT('',#218264); +#218264 = CARTESIAN_POINT('',(111.264247,-66.5672,1.585)); +#218265 = LINE('',#218266,#218267); +#218266 = CARTESIAN_POINT('',(111.266649,-64.867814,1.585)); +#218267 = VECTOR('',#218268,1.); +#218268 = DIRECTION('',(-1.413450270035E-03,-0.999999001079,0.)); +#218269 = ORIENTED_EDGE('',*,*,#218270,.T.); +#218270 = EDGE_CURVE('',#218263,#218271,#218273,.T.); +#218271 = VERTEX_POINT('',#218272); +#218272 = CARTESIAN_POINT('',(111.019051,-66.5672,1.585)); +#218273 = CIRCLE('',#218274,0.1249997864); +#218274 = AXIS2_PLACEMENT_3D('',#218275,#218276,#218277); +#218275 = CARTESIAN_POINT('',(111.141649,-66.542814,1.585)); +#218276 = DIRECTION('',(-0.,0.,-1.)); +#218277 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218278 = ORIENTED_EDGE('',*,*,#218279,.T.); +#218279 = EDGE_CURVE('',#218271,#218280,#218282,.T.); +#218280 = VERTEX_POINT('',#218281); +#218281 = CARTESIAN_POINT('',(111.016649,-64.867814,1.585)); +#218282 = LINE('',#218283,#218284); +#218283 = CARTESIAN_POINT('',(111.019051,-66.5672,1.585)); +#218284 = VECTOR('',#218285,1.); +#218285 = DIRECTION('',(-1.413450270035E-03,0.999999001079,0.)); +#218286 = ORIENTED_EDGE('',*,*,#218287,.T.); +#218287 = EDGE_CURVE('',#218280,#218227,#218288,.T.); +#218288 = LINE('',#218289,#218290); +#218289 = CARTESIAN_POINT('',(111.016649,-64.867814,1.585)); +#218290 = VECTOR('',#218291,1.); +#218291 = DIRECTION('',(-0.999983142515,5.806434828344E-03,0.)); +#218292 = PLANE('',#218293); +#218293 = AXIS2_PLACEMENT_3D('',#218294,#218295,#218296); +#218294 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218295 = DIRECTION('',(0.,0.,1.)); +#218296 = DIRECTION('',(1.,0.,-0.)); +#218297 = SHELL_BASED_SURFACE_MODEL('',(#218298)); +#218298 = OPEN_SHELL('',(#218299)); +#218299 = ADVANCED_FACE('',(#218300),#218443,.T.); +#218300 = FACE_BOUND('',#218301,.F.); +#218301 = EDGE_LOOP('',(#218302,#218312,#218320,#218328,#218336,#218345, + #218353,#218362,#218370,#218378,#218387,#218395,#218403,#218412, + #218420,#218429,#218437)); +#218302 = ORIENTED_EDGE('',*,*,#218303,.T.); +#218303 = EDGE_CURVE('',#218304,#218306,#218308,.T.); +#218304 = VERTEX_POINT('',#218305); +#218305 = CARTESIAN_POINT('',(113.355151,-64.668871,1.585)); +#218306 = VERTEX_POINT('',#218307); +#218307 = CARTESIAN_POINT('',(113.39112,-64.635931,1.585)); +#218308 = LINE('',#218309,#218310); +#218309 = CARTESIAN_POINT('',(113.355151,-64.668871,1.585)); +#218310 = VECTOR('',#218311,1.); +#218311 = DIRECTION('',(0.737476612799,0.675372671623,0.)); +#218312 = ORIENTED_EDGE('',*,*,#218313,.T.); +#218313 = EDGE_CURVE('',#218306,#218314,#218316,.T.); +#218314 = VERTEX_POINT('',#218315); +#218315 = CARTESIAN_POINT('',(113.436957,-64.619263,1.585)); +#218316 = LINE('',#218317,#218318); +#218317 = CARTESIAN_POINT('',(113.39112,-64.635931,1.585)); +#218318 = VECTOR('',#218319,1.); +#218319 = DIRECTION('',(0.939793423488,0.341743063087,0.)); +#218320 = ORIENTED_EDGE('',*,*,#218321,.T.); +#218321 = EDGE_CURVE('',#218314,#218322,#218324,.T.); +#218322 = VERTEX_POINT('',#218323); +#218323 = CARTESIAN_POINT('',(113.458635,-64.620216,1.585)); +#218324 = LINE('',#218325,#218326); +#218325 = CARTESIAN_POINT('',(113.436957,-64.619263,1.585)); +#218326 = VECTOR('',#218327,1.); +#218327 = DIRECTION('',(0.999035086367,-4.39192009089E-02,0.)); +#218328 = ORIENTED_EDGE('',*,*,#218329,.T.); +#218329 = EDGE_CURVE('',#218322,#218330,#218332,.T.); +#218330 = VERTEX_POINT('',#218331); +#218331 = CARTESIAN_POINT('',(113.485682,-64.621405,1.585)); +#218332 = LINE('',#218333,#218334); +#218333 = CARTESIAN_POINT('',(113.458635,-64.620216,1.585)); +#218334 = VECTOR('',#218335,1.); +#218335 = DIRECTION('',(0.999035134886,-4.391809721508E-02,0.)); +#218336 = ORIENTED_EDGE('',*,*,#218337,.T.); +#218337 = EDGE_CURVE('',#218330,#218338,#218340,.T.); +#218338 = VERTEX_POINT('',#218339); +#218339 = CARTESIAN_POINT('',(113.579356,-64.726786,1.585)); +#218340 = CIRCLE('',#218341,0.12381321241); +#218341 = AXIS2_PLACEMENT_3D('',#218342,#218343,#218344); +#218342 = CARTESIAN_POINT('',(113.45644637775,-64.74171705242,1.585)); +#218343 = DIRECTION('',(0.,0.,-1.)); +#218344 = DIRECTION('',(0.236126837172,0.971722242602,0.)); +#218345 = ORIENTED_EDGE('',*,*,#218346,.T.); +#218346 = EDGE_CURVE('',#218338,#218347,#218349,.T.); +#218347 = VERTEX_POINT('',#218348); +#218348 = CARTESIAN_POINT('',(113.578533,-66.5672,1.585)); +#218349 = LINE('',#218350,#218351); +#218350 = CARTESIAN_POINT('',(113.579356,-64.726786,1.585)); +#218351 = VECTOR('',#218352,1.); +#218352 = DIRECTION('',(-4.471819480415E-04,-0.999999900014,0.)); +#218353 = ORIENTED_EDGE('',*,*,#218354,.T.); +#218354 = EDGE_CURVE('',#218347,#218355,#218357,.T.); +#218355 = VERTEX_POINT('',#218356); +#218356 = CARTESIAN_POINT('',(113.333337,-66.5672,1.585)); +#218357 = CIRCLE('',#218358,0.1249997864); +#218358 = AXIS2_PLACEMENT_3D('',#218359,#218360,#218361); +#218359 = CARTESIAN_POINT('',(113.455935,-66.542814,1.585)); +#218360 = DIRECTION('',(-0.,0.,-1.)); +#218361 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218362 = ORIENTED_EDGE('',*,*,#218363,.T.); +#218363 = EDGE_CURVE('',#218355,#218364,#218366,.T.); +#218364 = VERTEX_POINT('',#218365); +#218365 = CARTESIAN_POINT('',(113.330935,-65.306259,1.585)); +#218366 = LINE('',#218367,#218368); +#218367 = CARTESIAN_POINT('',(113.333337,-66.5672,1.585)); +#218368 = VECTOR('',#218369,1.); +#218369 = DIRECTION('',(-1.904923102582E-03,0.999998185632,0.)); +#218370 = ORIENTED_EDGE('',*,*,#218371,.T.); +#218371 = EDGE_CURVE('',#218364,#218372,#218374,.T.); +#218372 = VERTEX_POINT('',#218373); +#218373 = CARTESIAN_POINT('',(112.956719,-66.102471,1.585)); +#218374 = LINE('',#218375,#218376); +#218375 = CARTESIAN_POINT('',(113.330935,-65.306259,1.585)); +#218376 = VECTOR('',#218377,1.); +#218377 = DIRECTION('',(-0.425357750962,-0.905025294506,0.)); +#218378 = ORIENTED_EDGE('',*,*,#218379,.T.); +#218379 = EDGE_CURVE('',#218372,#218380,#218382,.T.); +#218380 = VERTEX_POINT('',#218381); +#218381 = CARTESIAN_POINT('',(112.747951,-66.090318,1.585)); +#218382 = CIRCLE('',#218383,0.124429658313); +#218383 = AXIS2_PLACEMENT_3D('',#218384,#218385,#218386); +#218384 = CARTESIAN_POINT('',(112.85625495375,-66.02905631973,1.585)); +#218385 = DIRECTION('',(-0.,0.,-1.)); +#218386 = DIRECTION('',(0.807396304151,-0.590009498265,-0.)); +#218387 = ORIENTED_EDGE('',*,*,#218388,.T.); +#218388 = EDGE_CURVE('',#218380,#218389,#218391,.T.); +#218389 = VERTEX_POINT('',#218390); +#218390 = CARTESIAN_POINT('',(112.380935,-65.306259,1.585)); +#218391 = LINE('',#218392,#218393); +#218392 = CARTESIAN_POINT('',(112.747951,-66.090318,1.585)); +#218393 = VECTOR('',#218394,1.); +#218394 = DIRECTION('',(-0.423949258664,0.905685942299,0.)); +#218395 = ORIENTED_EDGE('',*,*,#218396,.T.); +#218396 = EDGE_CURVE('',#218389,#218397,#218399,.T.); +#218397 = VERTEX_POINT('',#218398); +#218398 = CARTESIAN_POINT('',(112.378533,-66.5672,1.585)); +#218399 = LINE('',#218400,#218401); +#218400 = CARTESIAN_POINT('',(112.380935,-65.306259,1.585)); +#218401 = VECTOR('',#218402,1.); +#218402 = DIRECTION('',(-1.90492310257E-03,-0.999998185632,0.)); +#218403 = ORIENTED_EDGE('',*,*,#218404,.T.); +#218404 = EDGE_CURVE('',#218397,#218405,#218407,.T.); +#218405 = VERTEX_POINT('',#218406); +#218406 = CARTESIAN_POINT('',(112.133337,-66.5672,1.585)); +#218407 = CIRCLE('',#218408,0.1249997864); +#218408 = AXIS2_PLACEMENT_3D('',#218409,#218410,#218411); +#218409 = CARTESIAN_POINT('',(112.255935,-66.542814,1.585)); +#218410 = DIRECTION('',(-0.,0.,-1.)); +#218411 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218412 = ORIENTED_EDGE('',*,*,#218413,.T.); +#218413 = EDGE_CURVE('',#218405,#218414,#218416,.T.); +#218414 = VERTEX_POINT('',#218415); +#218415 = CARTESIAN_POINT('',(112.133337,-64.718428,1.585)); +#218416 = LINE('',#218417,#218418); +#218417 = CARTESIAN_POINT('',(112.133337,-66.5672,1.585)); +#218418 = VECTOR('',#218419,1.); +#218419 = DIRECTION('',(0.,1.,0.)); +#218420 = ORIENTED_EDGE('',*,*,#218421,.T.); +#218421 = EDGE_CURVE('',#218414,#218422,#218424,.T.); +#218422 = VERTEX_POINT('',#218423); +#218423 = CARTESIAN_POINT('',(112.360998,-64.676095,1.585)); +#218424 = CIRCLE('',#218425,0.124570928096); +#218425 = AXIS2_PLACEMENT_3D('',#218426,#218427,#218428); +#218426 = CARTESIAN_POINT('',(112.25557000477,-64.74244900477,1.585)); +#218427 = DIRECTION('',(0.,0.,-1.)); +#218428 = DIRECTION('',(-0.981232191516,0.192829941483,0.)); +#218429 = ORIENTED_EDGE('',*,*,#218430,.T.); +#218430 = EDGE_CURVE('',#218422,#218431,#218433,.T.); +#218431 = VERTEX_POINT('',#218432); +#218432 = CARTESIAN_POINT('',(112.855934,-65.732939,1.585)); +#218433 = LINE('',#218434,#218435); +#218434 = CARTESIAN_POINT('',(112.360998,-64.676095,1.585)); +#218435 = VECTOR('',#218436,1.); +#218436 = DIRECTION('',(0.424110946599,-0.905610238996,0.)); +#218437 = ORIENTED_EDGE('',*,*,#218438,.T.); +#218438 = EDGE_CURVE('',#218431,#218304,#218439,.T.); +#218439 = LINE('',#218440,#218441); +#218440 = CARTESIAN_POINT('',(112.855934,-65.732939,1.585)); +#218441 = VECTOR('',#218442,1.); +#218442 = DIRECTION('',(0.424737369134,0.905316611612,0.)); +#218443 = PLANE('',#218444); +#218444 = AXIS2_PLACEMENT_3D('',#218445,#218446,#218447); +#218445 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218446 = DIRECTION('',(0.,0.,1.)); +#218447 = DIRECTION('',(1.,0.,-0.)); +#218448 = SHELL_BASED_SURFACE_MODEL('',(#218449)); +#218449 = OPEN_SHELL('',(#218450)); +#218450 = ADVANCED_FACE('',(#218451),#218657,.T.); +#218451 = FACE_BOUND('',#218452,.F.); +#218452 = EDGE_LOOP('',(#218453,#218463,#218471,#218479,#218487,#218495, + #218503,#218511,#218519,#218527,#218535,#218543,#218551,#218559, + #218568,#218576,#218585,#218593,#218601,#218609,#218618,#218626, + #218634,#218642,#218651)); +#218453 = ORIENTED_EDGE('',*,*,#218454,.T.); +#218454 = EDGE_CURVE('',#218455,#218457,#218459,.T.); +#218455 = VERTEX_POINT('',#218456); +#218456 = CARTESIAN_POINT('',(115.957918,-64.724595,1.585)); +#218457 = VERTEX_POINT('',#218458); +#218458 = CARTESIAN_POINT('',(116.165777,-64.622253,1.585)); +#218459 = LINE('',#218460,#218461); +#218460 = CARTESIAN_POINT('',(115.957918,-64.724595,1.585)); +#218461 = VECTOR('',#218462,1.); +#218462 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#218463 = ORIENTED_EDGE('',*,*,#218464,.T.); +#218464 = EDGE_CURVE('',#218457,#218465,#218467,.T.); +#218465 = VERTEX_POINT('',#218466); +#218466 = CARTESIAN_POINT('',(116.198793,-64.617814,1.585)); +#218467 = LINE('',#218468,#218469); +#218468 = CARTESIAN_POINT('',(116.165777,-64.622253,1.585)); +#218469 = VECTOR('',#218470,1.); +#218470 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#218471 = ORIENTED_EDGE('',*,*,#218472,.T.); +#218472 = EDGE_CURVE('',#218465,#218473,#218475,.T.); +#218473 = VERTEX_POINT('',#218474); +#218474 = CARTESIAN_POINT('',(116.65175,-64.620216,1.585)); +#218475 = LINE('',#218476,#218477); +#218476 = CARTESIAN_POINT('',(116.198793,-64.617814,1.585)); +#218477 = VECTOR('',#218478,1.); +#218478 = DIRECTION('',(0.999985939755,-5.302857064344E-03,0.)); +#218479 = ORIENTED_EDGE('',*,*,#218480,.T.); +#218480 = EDGE_CURVE('',#218473,#218481,#218483,.T.); +#218481 = VERTEX_POINT('',#218482); +#218482 = CARTESIAN_POINT('',(116.683265,-64.63101,1.585)); +#218483 = LINE('',#218484,#218485); +#218484 = CARTESIAN_POINT('',(116.65175,-64.620216,1.585)); +#218485 = VECTOR('',#218486,1.); +#218486 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#218487 = ORIENTED_EDGE('',*,*,#218488,.T.); +#218488 = EDGE_CURVE('',#218481,#218489,#218491,.T.); +#218489 = VERTEX_POINT('',#218490); +#218490 = CARTESIAN_POINT('',(116.875432,-64.729778,1.585)); +#218491 = LINE('',#218492,#218493); +#218492 = CARTESIAN_POINT('',(116.683265,-64.63101,1.585)); +#218493 = VECTOR('',#218494,1.); +#218494 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#218495 = ORIENTED_EDGE('',*,*,#218496,.T.); +#218496 = EDGE_CURVE('',#218489,#218497,#218499,.T.); +#218497 = VERTEX_POINT('',#218498); +#218498 = CARTESIAN_POINT('',(116.98844,-64.844796,1.585)); +#218499 = LINE('',#218500,#218501); +#218500 = CARTESIAN_POINT('',(116.875432,-64.729778,1.585)); +#218501 = VECTOR('',#218502,1.); +#218502 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#218503 = ORIENTED_EDGE('',*,*,#218504,.T.); +#218504 = EDGE_CURVE('',#218497,#218505,#218507,.T.); +#218505 = VERTEX_POINT('',#218506); +#218506 = CARTESIAN_POINT('',(117.090782,-65.052655,1.585)); +#218507 = LINE('',#218508,#218509); +#218508 = CARTESIAN_POINT('',(116.98844,-64.844796,1.585)); +#218509 = VECTOR('',#218510,1.); +#218510 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#218511 = ORIENTED_EDGE('',*,*,#218512,.T.); +#218512 = EDGE_CURVE('',#218505,#218513,#218515,.T.); +#218513 = VERTEX_POINT('',#218514); +#218514 = CARTESIAN_POINT('',(117.095221,-65.085671,1.585)); +#218515 = LINE('',#218516,#218517); +#218516 = CARTESIAN_POINT('',(117.090782,-65.052655,1.585)); +#218517 = VECTOR('',#218518,1.); +#218518 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#218519 = ORIENTED_EDGE('',*,*,#218520,.T.); +#218520 = EDGE_CURVE('',#218513,#218521,#218523,.T.); +#218521 = VERTEX_POINT('',#218522); +#218522 = CARTESIAN_POINT('',(117.092819,-65.281486,1.585)); +#218523 = LINE('',#218524,#218525); +#218524 = CARTESIAN_POINT('',(117.095221,-65.085671,1.585)); +#218525 = VECTOR('',#218526,1.); +#218526 = DIRECTION('',(-1.226575749649E-02,-0.999924772767,0.)); +#218527 = ORIENTED_EDGE('',*,*,#218528,.T.); +#218528 = EDGE_CURVE('',#218521,#218529,#218531,.T.); +#218529 = VERTEX_POINT('',#218530); +#218530 = CARTESIAN_POINT('',(116.993102,-65.576145,1.585)); +#218531 = LINE('',#218532,#218533); +#218532 = CARTESIAN_POINT('',(117.092819,-65.281486,1.585)); +#218533 = VECTOR('',#218534,1.); +#218534 = DIRECTION('',(-0.320556548827,-0.947229380353,0.)); +#218535 = ORIENTED_EDGE('',*,*,#218536,.T.); +#218536 = EDGE_CURVE('',#218529,#218537,#218539,.T.); +#218537 = VERTEX_POINT('',#218538); +#218538 = CARTESIAN_POINT('',(116.972895,-65.602631,1.585)); +#218539 = LINE('',#218540,#218541); +#218540 = CARTESIAN_POINT('',(116.993102,-65.576145,1.585)); +#218541 = VECTOR('',#218542,1.); +#218542 = DIRECTION('',(-0.606559497005,-0.795038097574,0.)); +#218543 = ORIENTED_EDGE('',*,*,#218544,.T.); +#218544 = EDGE_CURVE('',#218537,#218545,#218547,.T.); +#218545 = VERTEX_POINT('',#218546); +#218546 = CARTESIAN_POINT('',(116.157711,-66.417814,1.585)); +#218547 = LINE('',#218548,#218549); +#218548 = CARTESIAN_POINT('',(116.972895,-65.602631,1.585)); +#218549 = VECTOR('',#218550,1.); +#218550 = DIRECTION('',(-0.707107214897,-0.707106347476,0.)); +#218551 = ORIENTED_EDGE('',*,*,#218552,.T.); +#218552 = EDGE_CURVE('',#218545,#218553,#218555,.T.); +#218553 = VERTEX_POINT('',#218554); +#218554 = CARTESIAN_POINT('',(116.994607,-66.420216,1.585)); +#218555 = LINE('',#218556,#218557); +#218556 = CARTESIAN_POINT('',(116.157711,-66.417814,1.585)); +#218557 = VECTOR('',#218558,1.); +#218558 = DIRECTION('',(0.999995881203,-2.870117800348E-03,0.)); +#218559 = ORIENTED_EDGE('',*,*,#218560,.T.); +#218560 = EDGE_CURVE('',#218553,#218561,#218563,.T.); +#218561 = VERTEX_POINT('',#218562); +#218562 = CARTESIAN_POINT('',(116.994607,-66.665412,1.585)); +#218563 = CIRCLE('',#218564,0.1249997864); +#218564 = AXIS2_PLACEMENT_3D('',#218565,#218566,#218567); +#218565 = CARTESIAN_POINT('',(116.970221,-66.542814,1.585)); +#218566 = DIRECTION('',(0.,0.,-1.)); +#218567 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218568 = ORIENTED_EDGE('',*,*,#218569,.T.); +#218569 = EDGE_CURVE('',#218561,#218570,#218572,.T.); +#218570 = VERTEX_POINT('',#218571); +#218571 = CARTESIAN_POINT('',(115.831548,-66.665412,1.585)); +#218572 = LINE('',#218573,#218574); +#218573 = CARTESIAN_POINT('',(116.994607,-66.665412,1.585)); +#218574 = VECTOR('',#218575,1.); +#218575 = DIRECTION('',(-1.,0.,0.)); +#218576 = ORIENTED_EDGE('',*,*,#218577,.T.); +#218577 = EDGE_CURVE('',#218570,#218578,#218580,.T.); +#218578 = VERTEX_POINT('',#218579); +#218579 = CARTESIAN_POINT('',(115.752006,-66.473362,1.585)); +#218580 = CIRCLE('',#218581,0.124999123629); +#218581 = AXIS2_PLACEMENT_3D('',#218582,#218583,#218584); +#218582 = CARTESIAN_POINT('',(115.85593432933,-66.54281474126,1.585)); +#218583 = DIRECTION('',(0.,0.,-1.)); +#218584 = DIRECTION('',(-0.195092002484,-0.980784946136,-0.)); +#218585 = ORIENTED_EDGE('',*,*,#218586,.T.); +#218586 = EDGE_CURVE('',#218578,#218587,#218589,.T.); +#218587 = VERTEX_POINT('',#218588); +#218588 = CARTESIAN_POINT('',(116.775253,-65.446718,1.585)); +#218589 = LINE('',#218590,#218591); +#218590 = CARTESIAN_POINT('',(115.752006,-66.473362,1.585)); +#218591 = VECTOR('',#218592,1.); +#218592 = DIRECTION('',(0.705934021894,0.708277598638,0.)); +#218593 = ORIENTED_EDGE('',*,*,#218594,.T.); +#218594 = EDGE_CURVE('',#218587,#218595,#218597,.T.); +#218595 = VERTEX_POINT('',#218596); +#218596 = CARTESIAN_POINT('',(116.845221,-65.236814,1.585)); +#218597 = LINE('',#218598,#218599); +#218598 = CARTESIAN_POINT('',(116.775253,-65.446718,1.585)); +#218599 = VECTOR('',#218600,1.); +#218600 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#218601 = ORIENTED_EDGE('',*,*,#218602,.T.); +#218602 = EDGE_CURVE('',#218595,#218603,#218605,.T.); +#218603 = VERTEX_POINT('',#218604); +#218604 = CARTESIAN_POINT('',(116.845221,-65.115179,1.585)); +#218605 = LINE('',#218606,#218607); +#218606 = CARTESIAN_POINT('',(116.845221,-65.236814,1.585)); +#218607 = VECTOR('',#218608,1.); +#218608 = DIRECTION('',(0.,1.,0.)); +#218609 = ORIENTED_EDGE('',*,*,#218610,.T.); +#218610 = EDGE_CURVE('',#218603,#218611,#218613,.T.); +#218611 = VERTEX_POINT('',#218612); +#218612 = CARTESIAN_POINT('',(116.597855,-64.867814,1.585)); +#218613 = CIRCLE('',#218614,0.347631916063); +#218614 = AXIS2_PLACEMENT_3D('',#218615,#218616,#218617); +#218615 = CARTESIAN_POINT('',(116.50910831879,-65.20392703997,1.585)); +#218616 = DIRECTION('',(0.,0.,1.)); +#218617 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#218618 = ORIENTED_EDGE('',*,*,#218619,.T.); +#218619 = EDGE_CURVE('',#218611,#218620,#218622,.T.); +#218620 = VERTEX_POINT('',#218621); +#218621 = CARTESIAN_POINT('',(116.228302,-64.867814,1.585)); +#218622 = LINE('',#218623,#218624); +#218623 = CARTESIAN_POINT('',(116.597855,-64.867814,1.585)); +#218624 = VECTOR('',#218625,1.); +#218625 = DIRECTION('',(-1.,0.,0.)); +#218626 = ORIENTED_EDGE('',*,*,#218627,.T.); +#218627 = EDGE_CURVE('',#218620,#218628,#218630,.T.); +#218628 = VERTEX_POINT('',#218629); +#218629 = CARTESIAN_POINT('',(116.101406,-64.931261,1.585)); +#218630 = LINE('',#218631,#218632); +#218631 = CARTESIAN_POINT('',(116.228302,-64.867814,1.585)); +#218632 = VECTOR('',#218633,1.); +#218633 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#218634 = ORIENTED_EDGE('',*,*,#218635,.T.); +#218635 = EDGE_CURVE('',#218628,#218636,#218638,.T.); +#218636 = VERTEX_POINT('',#218637); +#218637 = CARTESIAN_POINT('',(116.011096,-65.018175,1.585)); +#218638 = LINE('',#218639,#218640); +#218639 = CARTESIAN_POINT('',(116.101406,-64.931261,1.585)); +#218640 = VECTOR('',#218641,1.); +#218641 = DIRECTION('',(-0.720524223499,-0.693429768146,0.)); +#218642 = ORIENTED_EDGE('',*,*,#218643,.T.); +#218643 = EDGE_CURVE('',#218636,#218644,#218646,.T.); +#218644 = VERTEX_POINT('',#218645); +#218645 = CARTESIAN_POINT('',(115.837717,-64.844796,1.585)); +#218646 = CIRCLE('',#218647,0.124999261618); +#218647 = AXIS2_PLACEMENT_3D('',#218648,#218649,#218650); +#218648 = CARTESIAN_POINT('',(115.94165,-64.914242,1.585)); +#218649 = DIRECTION('',(0.,0.,-1.)); +#218650 = DIRECTION('',(0.555571281792,-0.831468911535,0.)); +#218651 = ORIENTED_EDGE('',*,*,#218652,.T.); +#218652 = EDGE_CURVE('',#218644,#218455,#218653,.T.); +#218653 = LINE('',#218654,#218655); +#218654 = CARTESIAN_POINT('',(115.837717,-64.844796,1.585)); +#218655 = VECTOR('',#218656,1.); +#218656 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#218657 = PLANE('',#218658); +#218658 = AXIS2_PLACEMENT_3D('',#218659,#218660,#218661); +#218659 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218660 = DIRECTION('',(0.,0.,1.)); +#218661 = DIRECTION('',(1.,0.,-0.)); +#218662 = SHELL_BASED_SURFACE_MODEL('',(#218663)); +#218663 = OPEN_SHELL('',(#218664)); +#218664 = ADVANCED_FACE('',(#218665),#218759,.T.); +#218665 = FACE_BOUND('',#218666,.F.); +#218666 = EDGE_LOOP('',(#218667,#218678,#218686,#218695,#218703,#218711, + #218719,#218728,#218736,#218744,#218753)); +#218667 = ORIENTED_EDGE('',*,*,#218668,.T.); +#218668 = EDGE_CURVE('',#218669,#218671,#218673,.T.); +#218669 = VERTEX_POINT('',#218670); +#218670 = CARTESIAN_POINT('',(117.619052,-64.718428,1.585)); +#218671 = VERTEX_POINT('',#218672); +#218672 = CARTESIAN_POINT('',(117.717264,-64.620216,1.585)); +#218673 = CIRCLE('',#218674,0.124998078635); +#218674 = AXIS2_PLACEMENT_3D('',#218675,#218676,#218677); +#218675 = CARTESIAN_POINT('',(117.74164854765,-64.74281254765,1.585)); +#218676 = DIRECTION('',(0.,0.,-1.)); +#218677 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#218678 = ORIENTED_EDGE('',*,*,#218679,.T.); +#218679 = EDGE_CURVE('',#218671,#218680,#218682,.T.); +#218680 = VERTEX_POINT('',#218681); +#218681 = CARTESIAN_POINT('',(118.623179,-64.620216,1.585)); +#218682 = LINE('',#218683,#218684); +#218683 = CARTESIAN_POINT('',(117.717264,-64.620216,1.585)); +#218684 = VECTOR('',#218685,1.); +#218685 = DIRECTION('',(1.,0.,0.)); +#218686 = ORIENTED_EDGE('',*,*,#218687,.T.); +#218687 = EDGE_CURVE('',#218680,#218688,#218690,.T.); +#218688 = VERTEX_POINT('',#218689); +#218689 = CARTESIAN_POINT('',(118.623179,-64.865412,1.585)); +#218690 = CIRCLE('',#218691,0.1249997864); +#218691 = AXIS2_PLACEMENT_3D('',#218692,#218693,#218694); +#218692 = CARTESIAN_POINT('',(118.598793,-64.742814,1.585)); +#218693 = DIRECTION('',(0.,0.,-1.)); +#218694 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218695 = ORIENTED_EDGE('',*,*,#218696,.T.); +#218696 = EDGE_CURVE('',#218688,#218697,#218699,.T.); +#218697 = VERTEX_POINT('',#218698); +#218698 = CARTESIAN_POINT('',(117.86665,-64.867814,1.585)); +#218699 = LINE('',#218700,#218701); +#218700 = CARTESIAN_POINT('',(118.623179,-64.865412,1.585)); +#218701 = VECTOR('',#218702,1.); +#218702 = DIRECTION('',(-0.99999495964,-3.175010995011E-03,0.)); +#218703 = ORIENTED_EDGE('',*,*,#218704,.T.); +#218704 = EDGE_CURVE('',#218697,#218705,#218707,.T.); +#218705 = VERTEX_POINT('',#218706); +#218706 = CARTESIAN_POINT('',(117.86665,-65.474957,1.585)); +#218707 = LINE('',#218708,#218709); +#218708 = CARTESIAN_POINT('',(117.86665,-64.867814,1.585)); +#218709 = VECTOR('',#218710,1.); +#218710 = DIRECTION('',(0.,-1.,0.)); +#218711 = ORIENTED_EDGE('',*,*,#218712,.T.); +#218712 = EDGE_CURVE('',#218705,#218713,#218715,.T.); +#218713 = VERTEX_POINT('',#218714); +#218714 = CARTESIAN_POINT('',(118.366036,-65.477359,1.585)); +#218715 = LINE('',#218716,#218717); +#218716 = CARTESIAN_POINT('',(117.86665,-65.474957,1.585)); +#218717 = VECTOR('',#218718,1.); +#218718 = DIRECTION('',(0.9999884326,-4.809850927157E-03,0.)); +#218719 = ORIENTED_EDGE('',*,*,#218720,.T.); +#218720 = EDGE_CURVE('',#218713,#218721,#218723,.T.); +#218721 = VERTEX_POINT('',#218722); +#218722 = CARTESIAN_POINT('',(118.366036,-65.722555,1.585)); +#218723 = CIRCLE('',#218724,0.1249997864); +#218724 = AXIS2_PLACEMENT_3D('',#218725,#218726,#218727); +#218725 = CARTESIAN_POINT('',(118.34165,-65.599957,1.585)); +#218726 = DIRECTION('',(0.,0.,-1.)); +#218727 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218728 = ORIENTED_EDGE('',*,*,#218729,.T.); +#218729 = EDGE_CURVE('',#218721,#218730,#218732,.T.); +#218730 = VERTEX_POINT('',#218731); +#218731 = CARTESIAN_POINT('',(117.86665,-65.724957,1.585)); +#218732 = LINE('',#218733,#218734); +#218733 = CARTESIAN_POINT('',(118.366036,-65.722555,1.585)); +#218734 = VECTOR('',#218735,1.); +#218735 = DIRECTION('',(-0.9999884326,-4.809850927157E-03,0.)); +#218736 = ORIENTED_EDGE('',*,*,#218737,.T.); +#218737 = EDGE_CURVE('',#218730,#218738,#218740,.T.); +#218738 = VERTEX_POINT('',#218739); +#218739 = CARTESIAN_POINT('',(117.864248,-66.5672,1.585)); +#218740 = LINE('',#218741,#218742); +#218741 = CARTESIAN_POINT('',(117.86665,-65.724957,1.585)); +#218742 = VECTOR('',#218743,1.); +#218743 = DIRECTION('',(-2.851896936954E-03,-0.999995933334,0.)); +#218744 = ORIENTED_EDGE('',*,*,#218745,.T.); +#218745 = EDGE_CURVE('',#218738,#218746,#218748,.T.); +#218746 = VERTEX_POINT('',#218747); +#218747 = CARTESIAN_POINT('',(117.619052,-66.5672,1.585)); +#218748 = CIRCLE('',#218749,0.1249997864); +#218749 = AXIS2_PLACEMENT_3D('',#218750,#218751,#218752); +#218750 = CARTESIAN_POINT('',(117.74165,-66.542814,1.585)); +#218751 = DIRECTION('',(-0.,0.,-1.)); +#218752 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218753 = ORIENTED_EDGE('',*,*,#218754,.T.); +#218754 = EDGE_CURVE('',#218746,#218669,#218755,.T.); +#218755 = LINE('',#218756,#218757); +#218756 = CARTESIAN_POINT('',(117.619052,-66.5672,1.585)); +#218757 = VECTOR('',#218758,1.); +#218758 = DIRECTION('',(0.,1.,0.)); +#218759 = PLANE('',#218760); +#218760 = AXIS2_PLACEMENT_3D('',#218761,#218762,#218763); +#218761 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218762 = DIRECTION('',(0.,0.,1.)); +#218763 = DIRECTION('',(1.,0.,-0.)); +#218764 = SHELL_BASED_SURFACE_MODEL('',(#218765)); +#218765 = OPEN_SHELL('',(#218766)); +#218766 = ADVANCED_FACE('',(#218767),#218902,.T.); +#218767 = FACE_BOUND('',#218768,.F.); +#218768 = EDGE_LOOP('',(#218769,#218780,#218788,#218796,#218804,#218813, + #218821,#218829,#218838,#218846,#218854,#218863,#218871,#218879, + #218888,#218896)); +#218769 = ORIENTED_EDGE('',*,*,#218770,.T.); +#218770 = EDGE_CURVE('',#218771,#218773,#218775,.T.); +#218771 = VERTEX_POINT('',#218772); +#218772 = CARTESIAN_POINT('',(119.550724,-64.558351,1.585)); +#218773 = VERTEX_POINT('',#218774); +#218774 = CARTESIAN_POINT('',(119.751382,-64.672735,1.585)); +#218775 = CIRCLE('',#218776,0.125000268242); +#218776 = AXIS2_PLACEMENT_3D('',#218777,#218778,#218779); +#218777 = CARTESIAN_POINT('',(119.62736332303,-64.65710058848,1.585)); +#218778 = DIRECTION('',(0.,0.,-1.)); +#218779 = DIRECTION('',(-0.613113268549,0.789995012598,0.)); +#218780 = ORIENTED_EDGE('',*,*,#218781,.T.); +#218781 = EDGE_CURVE('',#218773,#218782,#218784,.T.); +#218782 = VERTEX_POINT('',#218783); +#218783 = CARTESIAN_POINT('',(119.372221,-65.817814,1.585)); +#218784 = LINE('',#218785,#218786); +#218785 = CARTESIAN_POINT('',(119.751382,-64.672735,1.585)); +#218786 = VECTOR('',#218787,1.); +#218787 = DIRECTION('',(-0.31433793287,-0.949311152341,0.)); +#218788 = ORIENTED_EDGE('',*,*,#218789,.T.); +#218789 = EDGE_CURVE('',#218782,#218790,#218792,.T.); +#218790 = VERTEX_POINT('',#218791); +#218791 = CARTESIAN_POINT('',(119.930936,-65.817814,1.585)); +#218792 = LINE('',#218793,#218794); +#218793 = CARTESIAN_POINT('',(119.372221,-65.817814,1.585)); +#218794 = VECTOR('',#218795,1.); +#218795 = DIRECTION('',(1.,0.,0.)); +#218796 = ORIENTED_EDGE('',*,*,#218797,.T.); +#218797 = EDGE_CURVE('',#218790,#218798,#218800,.T.); +#218798 = VERTEX_POINT('',#218799); +#218799 = CARTESIAN_POINT('',(119.933338,-65.318428,1.585)); +#218800 = LINE('',#218801,#218802); +#218801 = CARTESIAN_POINT('',(119.930936,-65.817814,1.585)); +#218802 = VECTOR('',#218803,1.); +#218803 = DIRECTION('',(4.809850927157E-03,0.9999884326,0.)); +#218804 = ORIENTED_EDGE('',*,*,#218805,.T.); +#218805 = EDGE_CURVE('',#218798,#218806,#218808,.T.); +#218806 = VERTEX_POINT('',#218807); +#218807 = CARTESIAN_POINT('',(120.178534,-65.318428,1.585)); +#218808 = CIRCLE('',#218809,0.1249997864); +#218809 = AXIS2_PLACEMENT_3D('',#218810,#218811,#218812); +#218810 = CARTESIAN_POINT('',(120.055936,-65.342814,1.585)); +#218811 = DIRECTION('',(0.,0.,-1.)); +#218812 = DIRECTION('',(-0.980785675968,0.195088333367,0.)); +#218813 = ORIENTED_EDGE('',*,*,#218814,.T.); +#218814 = EDGE_CURVE('',#218806,#218815,#218817,.T.); +#218815 = VERTEX_POINT('',#218816); +#218816 = CARTESIAN_POINT('',(120.180936,-65.817814,1.585)); +#218817 = LINE('',#218818,#218819); +#218818 = CARTESIAN_POINT('',(120.178534,-65.318428,1.585)); +#218819 = VECTOR('',#218820,1.); +#218820 = DIRECTION('',(4.809850927157E-03,-0.9999884326,0.)); +#218821 = ORIENTED_EDGE('',*,*,#218822,.T.); +#218822 = EDGE_CURVE('',#218815,#218823,#218825,.T.); +#218823 = VERTEX_POINT('',#218824); +#218824 = CARTESIAN_POINT('',(120.337464,-65.820216,1.585)); +#218825 = LINE('',#218826,#218827); +#218826 = CARTESIAN_POINT('',(120.180936,-65.817814,1.585)); +#218827 = VECTOR('',#218828,1.); +#218828 = DIRECTION('',(0.999882278647,-1.534369079854E-02,0.)); +#218829 = ORIENTED_EDGE('',*,*,#218830,.T.); +#218830 = EDGE_CURVE('',#218823,#218831,#218833,.T.); +#218831 = VERTEX_POINT('',#218832); +#218832 = CARTESIAN_POINT('',(120.337464,-66.065412,1.585)); +#218833 = CIRCLE('',#218834,0.1249997864); +#218834 = AXIS2_PLACEMENT_3D('',#218835,#218836,#218837); +#218835 = CARTESIAN_POINT('',(120.313078,-65.942814,1.585)); +#218836 = DIRECTION('',(0.,0.,-1.)); +#218837 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218838 = ORIENTED_EDGE('',*,*,#218839,.T.); +#218839 = EDGE_CURVE('',#218831,#218840,#218842,.T.); +#218840 = VERTEX_POINT('',#218841); +#218841 = CARTESIAN_POINT('',(120.180936,-66.067814,1.585)); +#218842 = LINE('',#218843,#218844); +#218843 = CARTESIAN_POINT('',(120.337464,-66.065412,1.585)); +#218844 = VECTOR('',#218845,1.); +#218845 = DIRECTION('',(-0.999882278647,-1.534369079854E-02,0.)); +#218846 = ORIENTED_EDGE('',*,*,#218847,.T.); +#218847 = EDGE_CURVE('',#218840,#218848,#218850,.T.); +#218848 = VERTEX_POINT('',#218849); +#218849 = CARTESIAN_POINT('',(120.178534,-66.5672,1.585)); +#218850 = LINE('',#218851,#218852); +#218851 = CARTESIAN_POINT('',(120.180936,-66.067814,1.585)); +#218852 = VECTOR('',#218853,1.); +#218853 = DIRECTION('',(-4.809850927157E-03,-0.9999884326,0.)); +#218854 = ORIENTED_EDGE('',*,*,#218855,.T.); +#218855 = EDGE_CURVE('',#218848,#218856,#218858,.T.); +#218856 = VERTEX_POINT('',#218857); +#218857 = CARTESIAN_POINT('',(119.933338,-66.5672,1.585)); +#218858 = CIRCLE('',#218859,0.1249997864); +#218859 = AXIS2_PLACEMENT_3D('',#218860,#218861,#218862); +#218860 = CARTESIAN_POINT('',(120.055936,-66.542814,1.585)); +#218861 = DIRECTION('',(-0.,0.,-1.)); +#218862 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218863 = ORIENTED_EDGE('',*,*,#218864,.T.); +#218864 = EDGE_CURVE('',#218856,#218865,#218867,.T.); +#218865 = VERTEX_POINT('',#218866); +#218866 = CARTESIAN_POINT('',(119.930936,-66.067814,1.585)); +#218867 = LINE('',#218868,#218869); +#218868 = CARTESIAN_POINT('',(119.933338,-66.5672,1.585)); +#218869 = VECTOR('',#218870,1.); +#218870 = DIRECTION('',(-4.809850927157E-03,0.9999884326,0.)); +#218871 = ORIENTED_EDGE('',*,*,#218872,.T.); +#218872 = EDGE_CURVE('',#218865,#218873,#218875,.T.); +#218873 = VERTEX_POINT('',#218874); +#218874 = CARTESIAN_POINT('',(119.174407,-66.065412,1.585)); +#218875 = LINE('',#218876,#218877); +#218876 = CARTESIAN_POINT('',(119.930936,-66.067814,1.585)); +#218877 = VECTOR('',#218878,1.); +#218878 = DIRECTION('',(-0.99999495964,3.175010995029E-03,0.)); +#218879 = ORIENTED_EDGE('',*,*,#218880,.T.); +#218880 = EDGE_CURVE('',#218873,#218881,#218883,.T.); +#218881 = VERTEX_POINT('',#218882); +#218882 = CARTESIAN_POINT('',(119.077458,-65.915376,1.585)); +#218883 = CIRCLE('',#218884,0.124022803552); +#218884 = AXIS2_PLACEMENT_3D('',#218885,#218886,#218887); +#218885 = CARTESIAN_POINT('',(119.19820467474,-65.94369377425,1.585)); +#218886 = DIRECTION('',(0.,0.,-1.)); +#218887 = DIRECTION('',(-0.191881444891,-0.981418112278,-0.)); +#218888 = ORIENTED_EDGE('',*,*,#218889,.T.); +#218889 = EDGE_CURVE('',#218881,#218890,#218892,.T.); +#218890 = VERTEX_POINT('',#218891); +#218891 = CARTESIAN_POINT('',(119.518769,-64.595197,1.585)); +#218892 = LINE('',#218893,#218894); +#218893 = CARTESIAN_POINT('',(119.077458,-65.915376,1.585)); +#218894 = VECTOR('',#218895,1.); +#218895 = DIRECTION('',(0.317036710261,0.948413266644,0.)); +#218896 = ORIENTED_EDGE('',*,*,#218897,.T.); +#218897 = EDGE_CURVE('',#218890,#218771,#218898,.T.); +#218898 = LINE('',#218899,#218900); +#218899 = CARTESIAN_POINT('',(119.518769,-64.595197,1.585)); +#218900 = VECTOR('',#218901,1.); +#218901 = DIRECTION('',(0.655185752622,0.755467821659,0.)); +#218902 = PLANE('',#218903); +#218903 = AXIS2_PLACEMENT_3D('',#218904,#218905,#218906); +#218904 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218905 = DIRECTION('',(0.,0.,1.)); +#218906 = DIRECTION('',(1.,0.,-0.)); +#218907 = SHELL_BASED_SURFACE_MODEL('',(#218908)); +#218908 = OPEN_SHELL('',(#218909)); +#218909 = ADVANCED_FACE('',(#218910),#219060,.T.); +#218910 = FACE_BOUND('',#218911,.F.); +#218911 = EDGE_LOOP('',(#218912,#218922,#218930,#218938,#218946,#218955, + #218963,#218971,#218980,#218988,#218997,#219005,#219013,#219021, + #219029,#219038,#219046,#219054)); +#218912 = ORIENTED_EDGE('',*,*,#218913,.T.); +#218913 = EDGE_CURVE('',#218914,#218916,#218918,.T.); +#218914 = VERTEX_POINT('',#218915); +#218915 = CARTESIAN_POINT('',(121.338883,-64.654519,1.585)); +#218916 = VERTEX_POINT('',#218917); +#218917 = CARTESIAN_POINT('',(121.379407,-64.627379,1.585)); +#218918 = LINE('',#218919,#218920); +#218919 = CARTESIAN_POINT('',(121.338883,-64.654519,1.585)); +#218920 = VECTOR('',#218921,1.); +#218921 = DIRECTION('',(0.830875014019,0.556459083024,0.)); +#218922 = ORIENTED_EDGE('',*,*,#218923,.T.); +#218923 = EDGE_CURVE('',#218916,#218924,#218926,.T.); +#218924 = VERTEX_POINT('',#218925); +#218925 = CARTESIAN_POINT('',(121.427233,-64.617814,1.585)); +#218926 = LINE('',#218927,#218928); +#218927 = CARTESIAN_POINT('',(121.379407,-64.627379,1.585)); +#218928 = VECTOR('',#218929,1.); +#218929 = DIRECTION('',(0.980581464264,0.196112192232,0.)); +#218930 = ORIENTED_EDGE('',*,*,#218931,.T.); +#218931 = EDGE_CURVE('',#218924,#218932,#218934,.T.); +#218932 = VERTEX_POINT('',#218933); +#218933 = CARTESIAN_POINT('',(121.439375,-64.620216,1.585)); +#218934 = LINE('',#218935,#218936); +#218935 = CARTESIAN_POINT('',(121.427233,-64.617814,1.585)); +#218936 = VECTOR('',#218937,1.); +#218937 = DIRECTION('',(0.980988710835,-0.194064806739,0.)); +#218938 = ORIENTED_EDGE('',*,*,#218939,.T.); +#218939 = EDGE_CURVE('',#218932,#218940,#218942,.T.); +#218940 = VERTEX_POINT('',#218941); +#218941 = CARTESIAN_POINT('',(121.475079,-64.627279,1.585)); +#218942 = LINE('',#218943,#218944); +#218943 = CARTESIAN_POINT('',(121.439375,-64.620216,1.585)); +#218944 = VECTOR('',#218945,1.); +#218945 = DIRECTION('',(0.980989599119,-0.194060316451,0.)); +#218946 = ORIENTED_EDGE('',*,*,#218947,.T.); +#218947 = EDGE_CURVE('',#218940,#218948,#218950,.T.); +#218948 = VERTEX_POINT('',#218949); +#218949 = CARTESIAN_POINT('',(121.552364,-64.742814,1.585)); +#218950 = CIRCLE('',#218951,0.125003327266); +#218951 = AXIS2_PLACEMENT_3D('',#218952,#218953,#218954); +#218952 = CARTESIAN_POINT('',(121.42736067274,-64.74281597707,1.585)); +#218953 = DIRECTION('',(0.,0.,-1.)); +#218954 = DIRECTION('',(0.381736456895,0.924271214242,0.)); +#218955 = ORIENTED_EDGE('',*,*,#218956,.T.); +#218956 = EDGE_CURVE('',#218948,#218957,#218959,.T.); +#218957 = VERTEX_POINT('',#218958); +#218958 = CARTESIAN_POINT('',(121.552364,-66.417814,1.585)); +#218959 = LINE('',#218960,#218961); +#218960 = CARTESIAN_POINT('',(121.552364,-64.742814,1.585)); +#218961 = VECTOR('',#218962,1.); +#218962 = DIRECTION('',(0.,-1.,0.)); +#218963 = ORIENTED_EDGE('',*,*,#218964,.T.); +#218964 = EDGE_CURVE('',#218957,#218965,#218967,.T.); +#218965 = VERTEX_POINT('',#218966); +#218966 = CARTESIAN_POINT('',(121.966036,-66.420216,1.585)); +#218967 = LINE('',#218968,#218969); +#218968 = CARTESIAN_POINT('',(121.552364,-66.417814,1.585)); +#218969 = VECTOR('',#218970,1.); +#218970 = DIRECTION('',(0.999983142515,-5.806434828344E-03,0.)); +#218971 = ORIENTED_EDGE('',*,*,#218972,.T.); +#218972 = EDGE_CURVE('',#218965,#218973,#218975,.T.); +#218973 = VERTEX_POINT('',#218974); +#218974 = CARTESIAN_POINT('',(121.966036,-66.665412,1.585)); +#218975 = CIRCLE('',#218976,0.1249997864); +#218976 = AXIS2_PLACEMENT_3D('',#218977,#218978,#218979); +#218977 = CARTESIAN_POINT('',(121.94165,-66.542814,1.585)); +#218978 = DIRECTION('',(0.,0.,-1.)); +#218979 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218980 = ORIENTED_EDGE('',*,*,#218981,.T.); +#218981 = EDGE_CURVE('',#218973,#218982,#218984,.T.); +#218982 = VERTEX_POINT('',#218983); +#218983 = CARTESIAN_POINT('',(120.888693,-66.665412,1.585)); +#218984 = LINE('',#218985,#218986); +#218985 = CARTESIAN_POINT('',(121.966036,-66.665412,1.585)); +#218986 = VECTOR('',#218987,1.); +#218987 = DIRECTION('',(-1.,0.,0.)); +#218988 = ORIENTED_EDGE('',*,*,#218989,.T.); +#218989 = EDGE_CURVE('',#218982,#218990,#218992,.T.); +#218990 = VERTEX_POINT('',#218991); +#218991 = CARTESIAN_POINT('',(120.888693,-66.420216,1.585)); +#218992 = CIRCLE('',#218993,0.1249997864); +#218993 = AXIS2_PLACEMENT_3D('',#218994,#218995,#218996); +#218994 = CARTESIAN_POINT('',(120.913079,-66.542814,1.585)); +#218995 = DIRECTION('',(0.,0.,-1.)); +#218996 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#218997 = ORIENTED_EDGE('',*,*,#218998,.T.); +#218998 = EDGE_CURVE('',#218990,#218999,#219001,.T.); +#218999 = VERTEX_POINT('',#219000); +#219000 = CARTESIAN_POINT('',(121.302364,-66.417814,1.585)); +#219001 = LINE('',#219002,#219003); +#219002 = CARTESIAN_POINT('',(120.888693,-66.420216,1.585)); +#219003 = VECTOR('',#219004,1.); +#219004 = DIRECTION('',(0.999983142434,5.806448864231E-03,0.)); +#219005 = ORIENTED_EDGE('',*,*,#219006,.T.); +#219006 = EDGE_CURVE('',#218999,#219007,#219009,.T.); +#219007 = VERTEX_POINT('',#219008); +#219008 = CARTESIAN_POINT('',(121.302364,-65.130305,1.585)); +#219009 = LINE('',#219010,#219011); +#219010 = CARTESIAN_POINT('',(121.302364,-66.417814,1.585)); +#219011 = VECTOR('',#219012,1.); +#219012 = DIRECTION('',(0.,1.,0.)); +#219013 = ORIENTED_EDGE('',*,*,#219014,.T.); +#219014 = EDGE_CURVE('',#219007,#219015,#219017,.T.); +#219015 = VERTEX_POINT('',#219016); +#219016 = CARTESIAN_POINT('',(121.153953,-65.275319,1.585)); +#219017 = LINE('',#219018,#219019); +#219018 = CARTESIAN_POINT('',(121.302364,-65.130305,1.585)); +#219019 = VECTOR('',#219020,1.); +#219020 = DIRECTION('',(-0.715245071663,-0.698873727838,0.)); +#219021 = ORIENTED_EDGE('',*,*,#219022,.T.); +#219022 = EDGE_CURVE('',#219015,#219023,#219025,.T.); +#219023 = VERTEX_POINT('',#219024); +#219024 = CARTESIAN_POINT('',(120.946096,-65.377661,1.585)); +#219025 = LINE('',#219026,#219027); +#219026 = CARTESIAN_POINT('',(121.153953,-65.275319,1.585)); +#219027 = VECTOR('',#219028,1.); +#219028 = DIRECTION('',(-0.897149466573,-0.441727104249,0.)); +#219029 = ORIENTED_EDGE('',*,*,#219030,.T.); +#219030 = EDGE_CURVE('',#219023,#219031,#219033,.T.); +#219031 = VERTEX_POINT('',#219032); +#219032 = CARTESIAN_POINT('',(120.83644,-65.158351,1.585)); +#219033 = CIRCLE('',#219034,0.125000061263); +#219034 = AXIS2_PLACEMENT_3D('',#219035,#219036,#219037); +#219035 = CARTESIAN_POINT('',(120.91307963978,-65.25710008065,1.585)); +#219036 = DIRECTION('',(0.,0.,-1.)); +#219037 = DIRECTION('',(0.26413075229,-0.964486882075,0.)); +#219038 = ORIENTED_EDGE('',*,*,#219039,.T.); +#219039 = EDGE_CURVE('',#219031,#219040,#219042,.T.); +#219040 = VERTEX_POINT('',#219041); +#219041 = CARTESIAN_POINT('',(121.01046,-65.068654,1.585)); +#219042 = LINE('',#219043,#219044); +#219043 = CARTESIAN_POINT('',(120.83644,-65.158351,1.585)); +#219044 = VECTOR('',#219045,1.); +#219045 = DIRECTION('',(0.888869866551,0.458159754166,0.)); +#219046 = ORIENTED_EDGE('',*,*,#219047,.T.); +#219047 = EDGE_CURVE('',#219040,#219048,#219050,.T.); +#219048 = VERTEX_POINT('',#219049); +#219049 = CARTESIAN_POINT('',(121.158798,-64.920317,1.585)); +#219050 = LINE('',#219051,#219052); +#219051 = CARTESIAN_POINT('',(121.01046,-65.068654,1.585)); +#219052 = VECTOR('',#219053,1.); +#219053 = DIRECTION('',(0.707109164622,0.707104397743,0.)); +#219054 = ORIENTED_EDGE('',*,*,#219055,.T.); +#219055 = EDGE_CURVE('',#219048,#218914,#219056,.T.); +#219056 = LINE('',#219057,#219058); +#219057 = CARTESIAN_POINT('',(121.158798,-64.920317,1.585)); +#219058 = VECTOR('',#219059,1.); +#219059 = DIRECTION('',(0.560908542404,0.827877773018,0.)); +#219060 = PLANE('',#219061); +#219061 = AXIS2_PLACEMENT_3D('',#219062,#219063,#219064); +#219062 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219063 = DIRECTION('',(0.,0.,1.)); +#219064 = DIRECTION('',(1.,0.,-0.)); +#219065 = SHELL_BASED_SURFACE_MODEL('',(#219066)); +#219066 = OPEN_SHELL('',(#219067)); +#219067 = ADVANCED_FACE('',(#219068),#219218,.T.); +#219068 = FACE_BOUND('',#219069,.F.); +#219069 = EDGE_LOOP('',(#219070,#219080,#219088,#219096,#219104,#219113, + #219121,#219129,#219138,#219146,#219155,#219163,#219171,#219179, + #219187,#219196,#219204,#219212)); +#219070 = ORIENTED_EDGE('',*,*,#219071,.T.); +#219071 = EDGE_CURVE('',#219072,#219074,#219076,.T.); +#219072 = VERTEX_POINT('',#219073); +#219073 = CARTESIAN_POINT('',(123.053169,-64.654519,1.585)); +#219074 = VERTEX_POINT('',#219075); +#219075 = CARTESIAN_POINT('',(123.093693,-64.627379,1.585)); +#219076 = LINE('',#219077,#219078); +#219077 = CARTESIAN_POINT('',(123.053169,-64.654519,1.585)); +#219078 = VECTOR('',#219079,1.); +#219079 = DIRECTION('',(0.830875014019,0.556459083024,0.)); +#219080 = ORIENTED_EDGE('',*,*,#219081,.T.); +#219081 = EDGE_CURVE('',#219074,#219082,#219084,.T.); +#219082 = VERTEX_POINT('',#219083); +#219083 = CARTESIAN_POINT('',(123.141519,-64.617814,1.585)); +#219084 = LINE('',#219085,#219086); +#219085 = CARTESIAN_POINT('',(123.093693,-64.627379,1.585)); +#219086 = VECTOR('',#219087,1.); +#219087 = DIRECTION('',(0.980581464264,0.196112192232,0.)); +#219088 = ORIENTED_EDGE('',*,*,#219089,.T.); +#219089 = EDGE_CURVE('',#219082,#219090,#219092,.T.); +#219090 = VERTEX_POINT('',#219091); +#219091 = CARTESIAN_POINT('',(123.153661,-64.620216,1.585)); +#219092 = LINE('',#219093,#219094); +#219093 = CARTESIAN_POINT('',(123.141519,-64.617814,1.585)); +#219094 = VECTOR('',#219095,1.); +#219095 = DIRECTION('',(0.980988710835,-0.194064806739,0.)); +#219096 = ORIENTED_EDGE('',*,*,#219097,.T.); +#219097 = EDGE_CURVE('',#219090,#219098,#219100,.T.); +#219098 = VERTEX_POINT('',#219099); +#219099 = CARTESIAN_POINT('',(123.189365,-64.627279,1.585)); +#219100 = LINE('',#219101,#219102); +#219101 = CARTESIAN_POINT('',(123.153661,-64.620216,1.585)); +#219102 = VECTOR('',#219103,1.); +#219103 = DIRECTION('',(0.980989599119,-0.194060316451,0.)); +#219104 = ORIENTED_EDGE('',*,*,#219105,.T.); +#219105 = EDGE_CURVE('',#219098,#219106,#219108,.T.); +#219106 = VERTEX_POINT('',#219107); +#219107 = CARTESIAN_POINT('',(123.26665,-64.742814,1.585)); +#219108 = CIRCLE('',#219109,0.125003327266); +#219109 = AXIS2_PLACEMENT_3D('',#219110,#219111,#219112); +#219110 = CARTESIAN_POINT('',(123.14164667274,-64.74281597707,1.585)); +#219111 = DIRECTION('',(0.,0.,-1.)); +#219112 = DIRECTION('',(0.381736456895,0.924271214242,0.)); +#219113 = ORIENTED_EDGE('',*,*,#219114,.T.); +#219114 = EDGE_CURVE('',#219106,#219115,#219117,.T.); +#219115 = VERTEX_POINT('',#219116); +#219116 = CARTESIAN_POINT('',(123.26665,-66.417814,1.585)); +#219117 = LINE('',#219118,#219119); +#219118 = CARTESIAN_POINT('',(123.26665,-64.742814,1.585)); +#219119 = VECTOR('',#219120,1.); +#219120 = DIRECTION('',(0.,-1.,0.)); +#219121 = ORIENTED_EDGE('',*,*,#219122,.T.); +#219122 = EDGE_CURVE('',#219115,#219123,#219125,.T.); +#219123 = VERTEX_POINT('',#219124); +#219124 = CARTESIAN_POINT('',(123.680322,-66.420216,1.585)); +#219125 = LINE('',#219126,#219127); +#219126 = CARTESIAN_POINT('',(123.26665,-66.417814,1.585)); +#219127 = VECTOR('',#219128,1.); +#219128 = DIRECTION('',(0.999983142515,-5.806434828344E-03,0.)); +#219129 = ORIENTED_EDGE('',*,*,#219130,.T.); +#219130 = EDGE_CURVE('',#219123,#219131,#219133,.T.); +#219131 = VERTEX_POINT('',#219132); +#219132 = CARTESIAN_POINT('',(123.680322,-66.665412,1.585)); +#219133 = CIRCLE('',#219134,0.1249997864); +#219134 = AXIS2_PLACEMENT_3D('',#219135,#219136,#219137); +#219135 = CARTESIAN_POINT('',(123.655936,-66.542814,1.585)); +#219136 = DIRECTION('',(0.,0.,-1.)); +#219137 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219138 = ORIENTED_EDGE('',*,*,#219139,.T.); +#219139 = EDGE_CURVE('',#219131,#219140,#219142,.T.); +#219140 = VERTEX_POINT('',#219141); +#219141 = CARTESIAN_POINT('',(122.602979,-66.665412,1.585)); +#219142 = LINE('',#219143,#219144); +#219143 = CARTESIAN_POINT('',(123.680322,-66.665412,1.585)); +#219144 = VECTOR('',#219145,1.); +#219145 = DIRECTION('',(-1.,0.,0.)); +#219146 = ORIENTED_EDGE('',*,*,#219147,.T.); +#219147 = EDGE_CURVE('',#219140,#219148,#219150,.T.); +#219148 = VERTEX_POINT('',#219149); +#219149 = CARTESIAN_POINT('',(122.602979,-66.420216,1.585)); +#219150 = CIRCLE('',#219151,0.1249997864); +#219151 = AXIS2_PLACEMENT_3D('',#219152,#219153,#219154); +#219152 = CARTESIAN_POINT('',(122.627365,-66.542814,1.585)); +#219153 = DIRECTION('',(0.,0.,-1.)); +#219154 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#219155 = ORIENTED_EDGE('',*,*,#219156,.T.); +#219156 = EDGE_CURVE('',#219148,#219157,#219159,.T.); +#219157 = VERTEX_POINT('',#219158); +#219158 = CARTESIAN_POINT('',(123.01665,-66.417814,1.585)); +#219159 = LINE('',#219160,#219161); +#219160 = CARTESIAN_POINT('',(122.602979,-66.420216,1.585)); +#219161 = VECTOR('',#219162,1.); +#219162 = DIRECTION('',(0.999983142434,5.806448864231E-03,0.)); +#219163 = ORIENTED_EDGE('',*,*,#219164,.T.); +#219164 = EDGE_CURVE('',#219157,#219165,#219167,.T.); +#219165 = VERTEX_POINT('',#219166); +#219166 = CARTESIAN_POINT('',(123.01665,-65.130305,1.585)); +#219167 = LINE('',#219168,#219169); +#219168 = CARTESIAN_POINT('',(123.01665,-66.417814,1.585)); +#219169 = VECTOR('',#219170,1.); +#219170 = DIRECTION('',(0.,1.,0.)); +#219171 = ORIENTED_EDGE('',*,*,#219172,.T.); +#219172 = EDGE_CURVE('',#219165,#219173,#219175,.T.); +#219173 = VERTEX_POINT('',#219174); +#219174 = CARTESIAN_POINT('',(122.868239,-65.275319,1.585)); +#219175 = LINE('',#219176,#219177); +#219176 = CARTESIAN_POINT('',(123.01665,-65.130305,1.585)); +#219177 = VECTOR('',#219178,1.); +#219178 = DIRECTION('',(-0.715245071663,-0.698873727838,0.)); +#219179 = ORIENTED_EDGE('',*,*,#219180,.T.); +#219180 = EDGE_CURVE('',#219173,#219181,#219183,.T.); +#219181 = VERTEX_POINT('',#219182); +#219182 = CARTESIAN_POINT('',(122.660382,-65.377661,1.585)); +#219183 = LINE('',#219184,#219185); +#219184 = CARTESIAN_POINT('',(122.868239,-65.275319,1.585)); +#219185 = VECTOR('',#219186,1.); +#219186 = DIRECTION('',(-0.897149466573,-0.441727104249,0.)); +#219187 = ORIENTED_EDGE('',*,*,#219188,.T.); +#219188 = EDGE_CURVE('',#219181,#219189,#219191,.T.); +#219189 = VERTEX_POINT('',#219190); +#219190 = CARTESIAN_POINT('',(122.550726,-65.158351,1.585)); +#219191 = CIRCLE('',#219192,0.125000061263); +#219192 = AXIS2_PLACEMENT_3D('',#219193,#219194,#219195); +#219193 = CARTESIAN_POINT('',(122.62736563978,-65.25710008065,1.585)); +#219194 = DIRECTION('',(0.,0.,-1.)); +#219195 = DIRECTION('',(0.26413075229,-0.964486882075,0.)); +#219196 = ORIENTED_EDGE('',*,*,#219197,.T.); +#219197 = EDGE_CURVE('',#219189,#219198,#219200,.T.); +#219198 = VERTEX_POINT('',#219199); +#219199 = CARTESIAN_POINT('',(122.724746,-65.068654,1.585)); +#219200 = LINE('',#219201,#219202); +#219201 = CARTESIAN_POINT('',(122.550726,-65.158351,1.585)); +#219202 = VECTOR('',#219203,1.); +#219203 = DIRECTION('',(0.888869866551,0.458159754166,0.)); +#219204 = ORIENTED_EDGE('',*,*,#219205,.T.); +#219205 = EDGE_CURVE('',#219198,#219206,#219208,.T.); +#219206 = VERTEX_POINT('',#219207); +#219207 = CARTESIAN_POINT('',(122.873084,-64.920317,1.585)); +#219208 = LINE('',#219209,#219210); +#219209 = CARTESIAN_POINT('',(122.724746,-65.068654,1.585)); +#219210 = VECTOR('',#219211,1.); +#219211 = DIRECTION('',(0.707109164622,0.707104397743,0.)); +#219212 = ORIENTED_EDGE('',*,*,#219213,.T.); +#219213 = EDGE_CURVE('',#219206,#219072,#219214,.T.); +#219214 = LINE('',#219215,#219216); +#219215 = CARTESIAN_POINT('',(122.873084,-64.920317,1.585)); +#219216 = VECTOR('',#219217,1.); +#219217 = DIRECTION('',(0.560908542404,0.827877773018,0.)); +#219218 = PLANE('',#219219); +#219219 = AXIS2_PLACEMENT_3D('',#219220,#219221,#219222); +#219220 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219221 = DIRECTION('',(0.,0.,1.)); +#219222 = DIRECTION('',(1.,0.,-0.)); +#219223 = SHELL_BASED_SURFACE_MODEL('',(#219224)); +#219224 = OPEN_SHELL('',(#219225)); +#219225 = ADVANCED_FACE('',(#219226),#219303,.T.); +#219226 = FACE_BOUND('',#219227,.F.); +#219227 = EDGE_LOOP('',(#219228,#219239,#219247,#219255,#219264,#219272, + #219281,#219289,#219297)); +#219228 = ORIENTED_EDGE('',*,*,#219229,.T.); +#219229 = EDGE_CURVE('',#219230,#219232,#219234,.T.); +#219230 = VERTEX_POINT('',#219231); +#219231 = CARTESIAN_POINT('',(127.529348,-64.63888,1.585)); +#219232 = VERTEX_POINT('',#219233); +#219233 = CARTESIAN_POINT('',(127.721392,-64.718428,1.585)); +#219234 = CIRCLE('',#219235,0.124999692383); +#219235 = AXIS2_PLACEMENT_3D('',#219236,#219237,#219238); +#219236 = CARTESIAN_POINT('',(127.598794,-64.74281351807,1.585)); +#219237 = DIRECTION('',(0.,0.,-1.)); +#219238 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219239 = ORIENTED_EDGE('',*,*,#219240,.T.); +#219240 = EDGE_CURVE('',#219232,#219241,#219243,.T.); +#219241 = VERTEX_POINT('',#219242); +#219242 = CARTESIAN_POINT('',(127.723794,-66.417814,1.585)); +#219243 = LINE('',#219244,#219245); +#219244 = CARTESIAN_POINT('',(127.721392,-64.718428,1.585)); +#219245 = VECTOR('',#219246,1.); +#219246 = DIRECTION('',(1.413450270035E-03,-0.999999001079,0.)); +#219247 = ORIENTED_EDGE('',*,*,#219248,.T.); +#219248 = EDGE_CURVE('',#219241,#219249,#219251,.T.); +#219249 = VERTEX_POINT('',#219250); +#219250 = CARTESIAN_POINT('',(128.480323,-66.420216,1.585)); +#219251 = LINE('',#219252,#219253); +#219252 = CARTESIAN_POINT('',(127.723794,-66.417814,1.585)); +#219253 = VECTOR('',#219254,1.); +#219254 = DIRECTION('',(0.99999495964,-3.175010995011E-03,0.)); +#219255 = ORIENTED_EDGE('',*,*,#219256,.T.); +#219256 = EDGE_CURVE('',#219249,#219257,#219259,.T.); +#219257 = VERTEX_POINT('',#219258); +#219258 = CARTESIAN_POINT('',(128.480323,-66.665412,1.585)); +#219259 = CIRCLE('',#219260,0.1249997864); +#219260 = AXIS2_PLACEMENT_3D('',#219261,#219262,#219263); +#219261 = CARTESIAN_POINT('',(128.455937,-66.542814,1.585)); +#219262 = DIRECTION('',(0.,0.,-1.)); +#219263 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219264 = ORIENTED_EDGE('',*,*,#219265,.T.); +#219265 = EDGE_CURVE('',#219257,#219266,#219268,.T.); +#219266 = VERTEX_POINT('',#219267); +#219267 = CARTESIAN_POINT('',(127.574408,-66.665412,1.585)); +#219268 = LINE('',#219269,#219270); +#219269 = CARTESIAN_POINT('',(128.480323,-66.665412,1.585)); +#219270 = VECTOR('',#219271,1.); +#219271 = DIRECTION('',(-1.,0.,0.)); +#219272 = ORIENTED_EDGE('',*,*,#219273,.T.); +#219273 = EDGE_CURVE('',#219266,#219274,#219276,.T.); +#219274 = VERTEX_POINT('',#219275); +#219275 = CARTESIAN_POINT('',(127.476196,-66.5672,1.585)); +#219276 = CIRCLE('',#219277,0.124998078635); +#219277 = AXIS2_PLACEMENT_3D('',#219278,#219279,#219280); +#219278 = CARTESIAN_POINT('',(127.59879254765,-66.54281545234,1.585)); +#219279 = DIRECTION('',(0.,0.,-1.)); +#219280 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#219281 = ORIENTED_EDGE('',*,*,#219282,.T.); +#219282 = EDGE_CURVE('',#219274,#219283,#219285,.T.); +#219283 = VERTEX_POINT('',#219284); +#219284 = CARTESIAN_POINT('',(127.476196,-64.718428,1.585)); +#219285 = LINE('',#219286,#219287); +#219286 = CARTESIAN_POINT('',(127.476196,-66.5672,1.585)); +#219287 = VECTOR('',#219288,1.); +#219288 = DIRECTION('',(0.,1.,0.)); +#219289 = ORIENTED_EDGE('',*,*,#219290,.T.); +#219290 = EDGE_CURVE('',#219283,#219291,#219293,.T.); +#219291 = VERTEX_POINT('',#219292); +#219292 = CARTESIAN_POINT('',(127.49486,-64.673368,1.585)); +#219293 = LINE('',#219294,#219295); +#219294 = CARTESIAN_POINT('',(127.476196,-64.718428,1.585)); +#219295 = VECTOR('',#219296,1.); +#219296 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219297 = ORIENTED_EDGE('',*,*,#219298,.T.); +#219298 = EDGE_CURVE('',#219291,#219230,#219299,.T.); +#219299 = LINE('',#219300,#219301); +#219300 = CARTESIAN_POINT('',(127.49486,-64.673368,1.585)); +#219301 = VECTOR('',#219302,1.); +#219302 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#219303 = PLANE('',#219304); +#219304 = AXIS2_PLACEMENT_3D('',#219305,#219306,#219307); +#219305 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219306 = DIRECTION('',(0.,0.,1.)); +#219307 = DIRECTION('',(1.,0.,-0.)); +#219308 = SHELL_BASED_SURFACE_MODEL('',(#219309)); +#219309 = OPEN_SHELL('',(#219310)); +#219310 = ADVANCED_FACE('',(#219311,#219451),#219503,.T.); +#219311 = FACE_BOUND('',#219312,.F.); +#219312 = EDGE_LOOP('',(#219313,#219324,#219332,#219340,#219348,#219356, + #219364,#219372,#219380,#219388,#219396,#219404,#219412,#219420, + #219428,#219436,#219445)); +#219313 = ORIENTED_EDGE('',*,*,#219314,.T.); +#219314 = EDGE_CURVE('',#219315,#219317,#219319,.T.); +#219315 = VERTEX_POINT('',#219316); +#219316 = CARTESIAN_POINT('',(134.076196,-64.718428,1.585)); +#219317 = VERTEX_POINT('',#219318); +#219318 = CARTESIAN_POINT('',(134.174408,-64.620216,1.585)); +#219319 = CIRCLE('',#219320,0.124998078635); +#219320 = AXIS2_PLACEMENT_3D('',#219321,#219322,#219323); +#219321 = CARTESIAN_POINT('',(134.19879254765,-64.74281254765,1.585)); +#219322 = DIRECTION('',(0.,0.,-1.)); +#219323 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#219324 = ORIENTED_EDGE('',*,*,#219325,.T.); +#219325 = EDGE_CURVE('',#219317,#219326,#219328,.T.); +#219326 = VERTEX_POINT('',#219327); +#219327 = CARTESIAN_POINT('',(134.908894,-64.620216,1.585)); +#219328 = LINE('',#219329,#219330); +#219329 = CARTESIAN_POINT('',(134.174408,-64.620216,1.585)); +#219330 = VECTOR('',#219331,1.); +#219331 = DIRECTION('',(1.,0.,0.)); +#219332 = ORIENTED_EDGE('',*,*,#219333,.T.); +#219333 = EDGE_CURVE('',#219326,#219334,#219336,.T.); +#219334 = VERTEX_POINT('',#219335); +#219335 = CARTESIAN_POINT('',(134.940409,-64.63101,1.585)); +#219336 = LINE('',#219337,#219338); +#219337 = CARTESIAN_POINT('',(134.908894,-64.620216,1.585)); +#219338 = VECTOR('',#219339,1.); +#219339 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#219340 = ORIENTED_EDGE('',*,*,#219341,.T.); +#219341 = EDGE_CURVE('',#219334,#219342,#219344,.T.); +#219342 = VERTEX_POINT('',#219343); +#219343 = CARTESIAN_POINT('',(135.132576,-64.729778,1.585)); +#219344 = LINE('',#219345,#219346); +#219345 = CARTESIAN_POINT('',(134.940409,-64.63101,1.585)); +#219346 = VECTOR('',#219347,1.); +#219347 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#219348 = ORIENTED_EDGE('',*,*,#219349,.T.); +#219349 = EDGE_CURVE('',#219342,#219350,#219352,.T.); +#219350 = VERTEX_POINT('',#219351); +#219351 = CARTESIAN_POINT('',(135.245584,-64.844796,1.585)); +#219352 = LINE('',#219353,#219354); +#219353 = CARTESIAN_POINT('',(135.132576,-64.729778,1.585)); +#219354 = VECTOR('',#219355,1.); +#219355 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#219356 = ORIENTED_EDGE('',*,*,#219357,.T.); +#219357 = EDGE_CURVE('',#219350,#219358,#219360,.T.); +#219358 = VERTEX_POINT('',#219359); +#219359 = CARTESIAN_POINT('',(135.347926,-65.052655,1.585)); +#219360 = LINE('',#219361,#219362); +#219361 = CARTESIAN_POINT('',(135.245584,-64.844796,1.585)); +#219362 = VECTOR('',#219363,1.); +#219363 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#219364 = ORIENTED_EDGE('',*,*,#219365,.T.); +#219365 = EDGE_CURVE('',#219358,#219366,#219368,.T.); +#219366 = VERTEX_POINT('',#219367); +#219367 = CARTESIAN_POINT('',(135.352365,-65.085671,1.585)); +#219368 = LINE('',#219369,#219370); +#219369 = CARTESIAN_POINT('',(135.347926,-65.052655,1.585)); +#219370 = VECTOR('',#219371,1.); +#219371 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#219372 = ORIENTED_EDGE('',*,*,#219373,.T.); +#219373 = EDGE_CURVE('',#219366,#219374,#219376,.T.); +#219374 = VERTEX_POINT('',#219375); +#219375 = CARTESIAN_POINT('',(135.349963,-65.3672,1.585)); +#219376 = LINE('',#219377,#219378); +#219377 = CARTESIAN_POINT('',(135.352365,-65.085671,1.585)); +#219378 = VECTOR('',#219379,1.); +#219379 = DIRECTION('',(-8.531670195019E-03,-0.99996360464,0.)); +#219380 = ORIENTED_EDGE('',*,*,#219381,.T.); +#219381 = EDGE_CURVE('',#219374,#219382,#219384,.T.); +#219382 = VERTEX_POINT('',#219383); +#219383 = CARTESIAN_POINT('',(135.339168,-65.398716,1.585)); +#219384 = LINE('',#219385,#219386); +#219385 = CARTESIAN_POINT('',(135.349963,-65.3672,1.585)); +#219386 = VECTOR('',#219387,1.); +#219387 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#219388 = ORIENTED_EDGE('',*,*,#219389,.T.); +#219389 = EDGE_CURVE('',#219382,#219390,#219392,.T.); +#219390 = VERTEX_POINT('',#219391); +#219391 = CARTESIAN_POINT('',(135.2404,-65.590881,1.585)); +#219392 = LINE('',#219393,#219394); +#219393 = CARTESIAN_POINT('',(135.339168,-65.398716,1.585)); +#219394 = VECTOR('',#219395,1.); +#219395 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#219396 = ORIENTED_EDGE('',*,*,#219397,.T.); +#219397 = EDGE_CURVE('',#219390,#219398,#219400,.T.); +#219398 = VERTEX_POINT('',#219399); +#219399 = CARTESIAN_POINT('',(135.125384,-65.70389,1.585)); +#219400 = LINE('',#219401,#219402); +#219401 = CARTESIAN_POINT('',(135.2404,-65.590881,1.585)); +#219402 = VECTOR('',#219403,1.); +#219403 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#219404 = ORIENTED_EDGE('',*,*,#219405,.T.); +#219405 = EDGE_CURVE('',#219398,#219406,#219408,.T.); +#219406 = VERTEX_POINT('',#219407); +#219407 = CARTESIAN_POINT('',(134.917524,-65.806232,1.585)); +#219408 = LINE('',#219409,#219410); +#219409 = CARTESIAN_POINT('',(135.125384,-65.70389,1.585)); +#219410 = VECTOR('',#219411,1.); +#219411 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#219412 = ORIENTED_EDGE('',*,*,#219413,.T.); +#219413 = EDGE_CURVE('',#219406,#219414,#219416,.T.); +#219414 = VERTEX_POINT('',#219415); +#219415 = CARTESIAN_POINT('',(134.884508,-65.810671,1.585)); +#219416 = LINE('',#219417,#219418); +#219417 = CARTESIAN_POINT('',(134.917524,-65.806232,1.585)); +#219418 = VECTOR('',#219419,1.); +#219419 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#219420 = ORIENTED_EDGE('',*,*,#219421,.T.); +#219421 = EDGE_CURVE('',#219414,#219422,#219424,.T.); +#219422 = VERTEX_POINT('',#219423); +#219423 = CARTESIAN_POINT('',(134.323794,-65.810671,1.585)); +#219424 = LINE('',#219425,#219426); +#219425 = CARTESIAN_POINT('',(134.884508,-65.810671,1.585)); +#219426 = VECTOR('',#219427,1.); +#219427 = DIRECTION('',(-1.,0.,0.)); +#219428 = ORIENTED_EDGE('',*,*,#219429,.T.); +#219429 = EDGE_CURVE('',#219422,#219430,#219432,.T.); +#219430 = VERTEX_POINT('',#219431); +#219431 = CARTESIAN_POINT('',(134.321392,-66.5672,1.585)); +#219432 = LINE('',#219433,#219434); +#219433 = CARTESIAN_POINT('',(134.323794,-65.810671,1.585)); +#219434 = VECTOR('',#219435,1.); +#219435 = DIRECTION('',(-3.175010995011E-03,-0.99999495964,0.)); +#219436 = ORIENTED_EDGE('',*,*,#219437,.T.); +#219437 = EDGE_CURVE('',#219430,#219438,#219440,.T.); +#219438 = VERTEX_POINT('',#219439); +#219439 = CARTESIAN_POINT('',(134.076196,-66.5672,1.585)); +#219440 = CIRCLE('',#219441,0.1249997864); +#219441 = AXIS2_PLACEMENT_3D('',#219442,#219443,#219444); +#219442 = CARTESIAN_POINT('',(134.198794,-66.542814,1.585)); +#219443 = DIRECTION('',(-0.,0.,-1.)); +#219444 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#219445 = ORIENTED_EDGE('',*,*,#219446,.T.); +#219446 = EDGE_CURVE('',#219438,#219315,#219447,.T.); +#219447 = LINE('',#219448,#219449); +#219448 = CARTESIAN_POINT('',(134.076196,-66.5672,1.585)); +#219449 = VECTOR('',#219450,1.); +#219450 = DIRECTION('',(0.,1.,0.)); +#219451 = FACE_BOUND('',#219452,.F.); +#219452 = EDGE_LOOP('',(#219453,#219464,#219472,#219480,#219488,#219497) + ); +#219453 = ORIENTED_EDGE('',*,*,#219454,.T.); +#219454 = EDGE_CURVE('',#219455,#219457,#219459,.T.); +#219455 = VERTEX_POINT('',#219456); +#219456 = CARTESIAN_POINT('',(135.102365,-65.115179,1.585)); +#219457 = VERTEX_POINT('',#219458); +#219458 = CARTESIAN_POINT('',(134.854999,-64.867814,1.585)); +#219459 = CIRCLE('',#219460,0.347631916063); +#219460 = AXIS2_PLACEMENT_3D('',#219461,#219462,#219463); +#219461 = CARTESIAN_POINT('',(134.76625231879,-65.20392703997,1.585)); +#219462 = DIRECTION('',(0.,0.,1.)); +#219463 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#219464 = ORIENTED_EDGE('',*,*,#219465,.T.); +#219465 = EDGE_CURVE('',#219457,#219466,#219468,.T.); +#219466 = VERTEX_POINT('',#219467); +#219467 = CARTESIAN_POINT('',(134.323794,-64.867814,1.585)); +#219468 = LINE('',#219469,#219470); +#219469 = CARTESIAN_POINT('',(134.854999,-64.867814,1.585)); +#219470 = VECTOR('',#219471,1.); +#219471 = DIRECTION('',(-1.,0.,0.)); +#219472 = ORIENTED_EDGE('',*,*,#219473,.T.); +#219473 = EDGE_CURVE('',#219466,#219474,#219476,.T.); +#219474 = VERTEX_POINT('',#219475); +#219475 = CARTESIAN_POINT('',(134.323794,-65.560671,1.585)); +#219476 = LINE('',#219477,#219478); +#219477 = CARTESIAN_POINT('',(134.323794,-64.867814,1.585)); +#219478 = VECTOR('',#219479,1.); +#219479 = DIRECTION('',(0.,-1.,0.)); +#219480 = ORIENTED_EDGE('',*,*,#219481,.T.); +#219481 = EDGE_CURVE('',#219474,#219482,#219484,.T.); +#219482 = VERTEX_POINT('',#219483); +#219483 = CARTESIAN_POINT('',(134.854999,-65.560671,1.585)); +#219484 = LINE('',#219485,#219486); +#219485 = CARTESIAN_POINT('',(134.323794,-65.560671,1.585)); +#219486 = VECTOR('',#219487,1.); +#219487 = DIRECTION('',(1.,0.,0.)); +#219488 = ORIENTED_EDGE('',*,*,#219489,.T.); +#219489 = EDGE_CURVE('',#219482,#219490,#219492,.T.); +#219490 = VERTEX_POINT('',#219491); +#219491 = CARTESIAN_POINT('',(135.102365,-65.313305,1.585)); +#219492 = CIRCLE('',#219493,0.347641001424); +#219493 = AXIS2_PLACEMENT_3D('',#219494,#219495,#219496); +#219494 = CARTESIAN_POINT('',(134.76624460111,-65.22455060111,1.585)); +#219495 = DIRECTION('',(0.,0.,1.)); +#219496 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#219497 = ORIENTED_EDGE('',*,*,#219498,.T.); +#219498 = EDGE_CURVE('',#219490,#219455,#219499,.T.); +#219499 = LINE('',#219500,#219501); +#219500 = CARTESIAN_POINT('',(135.102365,-65.313305,1.585)); +#219501 = VECTOR('',#219502,1.); +#219502 = DIRECTION('',(0.,1.,0.)); +#219503 = PLANE('',#219504); +#219504 = AXIS2_PLACEMENT_3D('',#219505,#219506,#219507); +#219505 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219506 = DIRECTION('',(0.,0.,1.)); +#219507 = DIRECTION('',(1.,0.,-0.)); +#219508 = SHELL_BASED_SURFACE_MODEL('',(#219509)); +#219509 = OPEN_SHELL('',(#219510)); +#219510 = ADVANCED_FACE('',(#219511),#219563,.T.); +#219511 = FACE_BOUND('',#219512,.F.); +#219512 = EDGE_LOOP('',(#219513,#219524,#219532,#219541,#219549,#219557) + ); +#219513 = ORIENTED_EDGE('',*,*,#219514,.T.); +#219514 = EDGE_CURVE('',#219515,#219517,#219519,.T.); +#219515 = VERTEX_POINT('',#219516); +#219516 = CARTESIAN_POINT('',(135.929348,-64.63888,1.585)); +#219517 = VERTEX_POINT('',#219518); +#219518 = CARTESIAN_POINT('',(136.121392,-64.718428,1.585)); +#219519 = CIRCLE('',#219520,0.124999692383); +#219520 = AXIS2_PLACEMENT_3D('',#219521,#219522,#219523); +#219521 = CARTESIAN_POINT('',(135.998794,-64.74281351807,1.585)); +#219522 = DIRECTION('',(0.,0.,-1.)); +#219523 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219524 = ORIENTED_EDGE('',*,*,#219525,.T.); +#219525 = EDGE_CURVE('',#219517,#219526,#219528,.T.); +#219526 = VERTEX_POINT('',#219527); +#219527 = CARTESIAN_POINT('',(136.121392,-66.5672,1.585)); +#219528 = LINE('',#219529,#219530); +#219529 = CARTESIAN_POINT('',(136.121392,-64.718428,1.585)); +#219530 = VECTOR('',#219531,1.); +#219531 = DIRECTION('',(0.,-1.,0.)); +#219532 = ORIENTED_EDGE('',*,*,#219533,.T.); +#219533 = EDGE_CURVE('',#219526,#219534,#219536,.T.); +#219534 = VERTEX_POINT('',#219535); +#219535 = CARTESIAN_POINT('',(135.876196,-66.5672,1.585)); +#219536 = CIRCLE('',#219537,0.1249997864); +#219537 = AXIS2_PLACEMENT_3D('',#219538,#219539,#219540); +#219538 = CARTESIAN_POINT('',(135.998794,-66.542814,1.585)); +#219539 = DIRECTION('',(-0.,0.,-1.)); +#219540 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#219541 = ORIENTED_EDGE('',*,*,#219542,.T.); +#219542 = EDGE_CURVE('',#219534,#219543,#219545,.T.); +#219543 = VERTEX_POINT('',#219544); +#219544 = CARTESIAN_POINT('',(135.876196,-64.718428,1.585)); +#219545 = LINE('',#219546,#219547); +#219546 = CARTESIAN_POINT('',(135.876196,-66.5672,1.585)); +#219547 = VECTOR('',#219548,1.); +#219548 = DIRECTION('',(0.,1.,0.)); +#219549 = ORIENTED_EDGE('',*,*,#219550,.T.); +#219550 = EDGE_CURVE('',#219543,#219551,#219553,.T.); +#219551 = VERTEX_POINT('',#219552); +#219552 = CARTESIAN_POINT('',(135.89486,-64.673368,1.585)); +#219553 = LINE('',#219554,#219555); +#219554 = CARTESIAN_POINT('',(135.876196,-64.718428,1.585)); +#219555 = VECTOR('',#219556,1.); +#219556 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219557 = ORIENTED_EDGE('',*,*,#219558,.T.); +#219558 = EDGE_CURVE('',#219551,#219515,#219559,.T.); +#219559 = LINE('',#219560,#219561); +#219560 = CARTESIAN_POINT('',(135.89486,-64.673368,1.585)); +#219561 = VECTOR('',#219562,1.); +#219562 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#219563 = PLANE('',#219564); +#219564 = AXIS2_PLACEMENT_3D('',#219565,#219566,#219567); +#219565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219566 = DIRECTION('',(0.,0.,1.)); +#219567 = DIRECTION('',(1.,0.,-0.)); +#219568 = SHELL_BASED_SURFACE_MODEL('',(#219569)); +#219569 = OPEN_SHELL('',(#219570)); +#219570 = ADVANCED_FACE('',(#219571),#219648,.T.); +#219571 = FACE_BOUND('',#219572,.F.); +#219572 = EDGE_LOOP('',(#219573,#219584,#219592,#219600,#219609,#219617, + #219626,#219634,#219642)); +#219573 = ORIENTED_EDGE('',*,*,#219574,.T.); +#219574 = EDGE_CURVE('',#219575,#219577,#219579,.T.); +#219575 = VERTEX_POINT('',#219576); +#219576 = CARTESIAN_POINT('',(136.786491,-64.63888,1.585)); +#219577 = VERTEX_POINT('',#219578); +#219578 = CARTESIAN_POINT('',(136.978535,-64.718428,1.585)); +#219579 = CIRCLE('',#219580,0.124999692383); +#219580 = AXIS2_PLACEMENT_3D('',#219581,#219582,#219583); +#219581 = CARTESIAN_POINT('',(136.855937,-64.74281351807,1.585)); +#219582 = DIRECTION('',(0.,0.,-1.)); +#219583 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219584 = ORIENTED_EDGE('',*,*,#219585,.T.); +#219585 = EDGE_CURVE('',#219577,#219586,#219588,.T.); +#219586 = VERTEX_POINT('',#219587); +#219587 = CARTESIAN_POINT('',(136.980937,-66.417814,1.585)); +#219588 = LINE('',#219589,#219590); +#219589 = CARTESIAN_POINT('',(136.978535,-64.718428,1.585)); +#219590 = VECTOR('',#219591,1.); +#219591 = DIRECTION('',(1.413450270044E-03,-0.999999001079,0.)); +#219592 = ORIENTED_EDGE('',*,*,#219593,.T.); +#219593 = EDGE_CURVE('',#219586,#219594,#219596,.T.); +#219594 = VERTEX_POINT('',#219595); +#219595 = CARTESIAN_POINT('',(137.737466,-66.420216,1.585)); +#219596 = LINE('',#219597,#219598); +#219597 = CARTESIAN_POINT('',(136.980937,-66.417814,1.585)); +#219598 = VECTOR('',#219599,1.); +#219599 = DIRECTION('',(0.99999495964,-3.175010995011E-03,0.)); +#219600 = ORIENTED_EDGE('',*,*,#219601,.T.); +#219601 = EDGE_CURVE('',#219594,#219602,#219604,.T.); +#219602 = VERTEX_POINT('',#219603); +#219603 = CARTESIAN_POINT('',(137.737466,-66.665412,1.585)); +#219604 = CIRCLE('',#219605,0.1249997864); +#219605 = AXIS2_PLACEMENT_3D('',#219606,#219607,#219608); +#219606 = CARTESIAN_POINT('',(137.71308,-66.542814,1.585)); +#219607 = DIRECTION('',(0.,0.,-1.)); +#219608 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219609 = ORIENTED_EDGE('',*,*,#219610,.T.); +#219610 = EDGE_CURVE('',#219602,#219611,#219613,.T.); +#219611 = VERTEX_POINT('',#219612); +#219612 = CARTESIAN_POINT('',(136.831551,-66.665412,1.585)); +#219613 = LINE('',#219614,#219615); +#219614 = CARTESIAN_POINT('',(137.737466,-66.665412,1.585)); +#219615 = VECTOR('',#219616,1.); +#219616 = DIRECTION('',(-1.,0.,0.)); +#219617 = ORIENTED_EDGE('',*,*,#219618,.T.); +#219618 = EDGE_CURVE('',#219611,#219619,#219621,.T.); +#219619 = VERTEX_POINT('',#219620); +#219620 = CARTESIAN_POINT('',(136.733339,-66.5672,1.585)); +#219621 = CIRCLE('',#219622,0.124998078635); +#219622 = AXIS2_PLACEMENT_3D('',#219623,#219624,#219625); +#219623 = CARTESIAN_POINT('',(136.85593554765,-66.54281545234,1.585)); +#219624 = DIRECTION('',(0.,0.,-1.)); +#219625 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#219626 = ORIENTED_EDGE('',*,*,#219627,.T.); +#219627 = EDGE_CURVE('',#219619,#219628,#219630,.T.); +#219628 = VERTEX_POINT('',#219629); +#219629 = CARTESIAN_POINT('',(136.733339,-64.718428,1.585)); +#219630 = LINE('',#219631,#219632); +#219631 = CARTESIAN_POINT('',(136.733339,-66.5672,1.585)); +#219632 = VECTOR('',#219633,1.); +#219633 = DIRECTION('',(0.,1.,0.)); +#219634 = ORIENTED_EDGE('',*,*,#219635,.T.); +#219635 = EDGE_CURVE('',#219628,#219636,#219638,.T.); +#219636 = VERTEX_POINT('',#219637); +#219637 = CARTESIAN_POINT('',(136.752003,-64.673368,1.585)); +#219638 = LINE('',#219639,#219640); +#219639 = CARTESIAN_POINT('',(136.733339,-64.718428,1.585)); +#219640 = VECTOR('',#219641,1.); +#219641 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219642 = ORIENTED_EDGE('',*,*,#219643,.T.); +#219643 = EDGE_CURVE('',#219636,#219575,#219644,.T.); +#219644 = LINE('',#219645,#219646); +#219645 = CARTESIAN_POINT('',(136.752003,-64.673368,1.585)); +#219646 = VECTOR('',#219647,1.); +#219647 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#219648 = PLANE('',#219649); +#219649 = AXIS2_PLACEMENT_3D('',#219650,#219651,#219652); +#219650 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219651 = DIRECTION('',(0.,0.,1.)); +#219652 = DIRECTION('',(1.,0.,-0.)); +#219653 = SHELL_BASED_SURFACE_MODEL('',(#219654)); +#219654 = OPEN_SHELL('',(#219655)); +#219655 = ADVANCED_FACE('',(#219656),#219733,.T.); +#219656 = FACE_BOUND('',#219657,.F.); +#219657 = EDGE_LOOP('',(#219658,#219669,#219677,#219685,#219694,#219702, + #219711,#219719,#219727)); +#219658 = ORIENTED_EDGE('',*,*,#219659,.T.); +#219659 = EDGE_CURVE('',#219660,#219662,#219664,.T.); +#219660 = VERTEX_POINT('',#219661); +#219661 = CARTESIAN_POINT('',(138.243634,-64.63888,1.585)); +#219662 = VERTEX_POINT('',#219663); +#219663 = CARTESIAN_POINT('',(138.435678,-64.718428,1.585)); +#219664 = CIRCLE('',#219665,0.124999692383); +#219665 = AXIS2_PLACEMENT_3D('',#219666,#219667,#219668); +#219666 = CARTESIAN_POINT('',(138.31308,-64.74281351807,1.585)); +#219667 = DIRECTION('',(0.,0.,-1.)); +#219668 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219669 = ORIENTED_EDGE('',*,*,#219670,.T.); +#219670 = EDGE_CURVE('',#219662,#219671,#219673,.T.); +#219671 = VERTEX_POINT('',#219672); +#219672 = CARTESIAN_POINT('',(138.43808,-66.417814,1.585)); +#219673 = LINE('',#219674,#219675); +#219674 = CARTESIAN_POINT('',(138.435678,-64.718428,1.585)); +#219675 = VECTOR('',#219676,1.); +#219676 = DIRECTION('',(1.413450270044E-03,-0.999999001079,0.)); +#219677 = ORIENTED_EDGE('',*,*,#219678,.T.); +#219678 = EDGE_CURVE('',#219671,#219679,#219681,.T.); +#219679 = VERTEX_POINT('',#219680); +#219680 = CARTESIAN_POINT('',(139.194609,-66.420216,1.585)); +#219681 = LINE('',#219682,#219683); +#219682 = CARTESIAN_POINT('',(138.43808,-66.417814,1.585)); +#219683 = VECTOR('',#219684,1.); +#219684 = DIRECTION('',(0.99999495964,-3.175010995011E-03,0.)); +#219685 = ORIENTED_EDGE('',*,*,#219686,.T.); +#219686 = EDGE_CURVE('',#219679,#219687,#219689,.T.); +#219687 = VERTEX_POINT('',#219688); +#219688 = CARTESIAN_POINT('',(139.194609,-66.665412,1.585)); +#219689 = CIRCLE('',#219690,0.1249997864); +#219690 = AXIS2_PLACEMENT_3D('',#219691,#219692,#219693); +#219691 = CARTESIAN_POINT('',(139.170223,-66.542814,1.585)); +#219692 = DIRECTION('',(0.,0.,-1.)); +#219693 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219694 = ORIENTED_EDGE('',*,*,#219695,.T.); +#219695 = EDGE_CURVE('',#219687,#219696,#219698,.T.); +#219696 = VERTEX_POINT('',#219697); +#219697 = CARTESIAN_POINT('',(138.288694,-66.665412,1.585)); +#219698 = LINE('',#219699,#219700); +#219699 = CARTESIAN_POINT('',(139.194609,-66.665412,1.585)); +#219700 = VECTOR('',#219701,1.); +#219701 = DIRECTION('',(-1.,0.,0.)); +#219702 = ORIENTED_EDGE('',*,*,#219703,.T.); +#219703 = EDGE_CURVE('',#219696,#219704,#219706,.T.); +#219704 = VERTEX_POINT('',#219705); +#219705 = CARTESIAN_POINT('',(138.190482,-66.5672,1.585)); +#219706 = CIRCLE('',#219707,0.124998078635); +#219707 = AXIS2_PLACEMENT_3D('',#219708,#219709,#219710); +#219708 = CARTESIAN_POINT('',(138.31307854765,-66.54281545234,1.585)); +#219709 = DIRECTION('',(0.,0.,-1.)); +#219710 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#219711 = ORIENTED_EDGE('',*,*,#219712,.T.); +#219712 = EDGE_CURVE('',#219704,#219713,#219715,.T.); +#219713 = VERTEX_POINT('',#219714); +#219714 = CARTESIAN_POINT('',(138.190482,-64.718428,1.585)); +#219715 = LINE('',#219716,#219717); +#219716 = CARTESIAN_POINT('',(138.190482,-66.5672,1.585)); +#219717 = VECTOR('',#219718,1.); +#219718 = DIRECTION('',(0.,1.,0.)); +#219719 = ORIENTED_EDGE('',*,*,#219720,.T.); +#219720 = EDGE_CURVE('',#219713,#219721,#219723,.T.); +#219721 = VERTEX_POINT('',#219722); +#219722 = CARTESIAN_POINT('',(138.209146,-64.673368,1.585)); +#219723 = LINE('',#219724,#219725); +#219724 = CARTESIAN_POINT('',(138.190482,-64.718428,1.585)); +#219725 = VECTOR('',#219726,1.); +#219726 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219727 = ORIENTED_EDGE('',*,*,#219728,.T.); +#219728 = EDGE_CURVE('',#219721,#219660,#219729,.T.); +#219729 = LINE('',#219730,#219731); +#219730 = CARTESIAN_POINT('',(138.209146,-64.673368,1.585)); +#219731 = VECTOR('',#219732,1.); +#219732 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#219733 = PLANE('',#219734); +#219734 = AXIS2_PLACEMENT_3D('',#219735,#219736,#219737); +#219735 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219736 = DIRECTION('',(0.,0.,1.)); +#219737 = DIRECTION('',(1.,0.,-0.)); +#219738 = SHELL_BASED_SURFACE_MODEL('',(#219739)); +#219739 = OPEN_SHELL('',(#219740)); +#219740 = ADVANCED_FACE('',(#219741,#219858),#219941,.T.); +#219741 = FACE_BOUND('',#219742,.F.); +#219742 = EDGE_LOOP('',(#219743,#219754,#219762,#219770,#219778,#219786, + #219795,#219803,#219811,#219819,#219828,#219836,#219844,#219852)); +#219743 = ORIENTED_EDGE('',*,*,#219744,.T.); +#219744 = EDGE_CURVE('',#219745,#219747,#219749,.T.); +#219745 = VERTEX_POINT('',#219746); +#219746 = CARTESIAN_POINT('',(170.535199,-65.450458,1.585)); +#219747 = VERTEX_POINT('',#219748); +#219748 = CARTESIAN_POINT('',(171.098513,-65.455824,1.585)); +#219749 = CIRCLE('',#219750,0.504047013411); +#219750 = AXIS2_PLACEMENT_3D('',#219751,#219752,#219753); +#219751 = CARTESIAN_POINT('',(170.81287439108,-65.87112386374,1.585)); +#219752 = DIRECTION('',(0.,0.,-1.)); +#219753 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#219754 = ORIENTED_EDGE('',*,*,#219755,.T.); +#219755 = EDGE_CURVE('',#219747,#219756,#219758,.T.); +#219756 = VERTEX_POINT('',#219757); +#219757 = CARTESIAN_POINT('',(171.161967,-65.521354,1.585)); +#219758 = LINE('',#219759,#219760); +#219759 = CARTESIAN_POINT('',(171.098513,-65.455824,1.585)); +#219760 = VECTOR('',#219761,1.); +#219761 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#219762 = ORIENTED_EDGE('',*,*,#219763,.T.); +#219763 = EDGE_CURVE('',#219756,#219764,#219766,.T.); +#219764 = VERTEX_POINT('',#219765); +#219765 = CARTESIAN_POINT('',(171.220028,-65.641801,1.585)); +#219766 = LINE('',#219767,#219768); +#219767 = CARTESIAN_POINT('',(171.161967,-65.521354,1.585)); +#219768 = VECTOR('',#219769,1.); +#219769 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#219770 = ORIENTED_EDGE('',*,*,#219771,.T.); +#219771 = EDGE_CURVE('',#219764,#219772,#219774,.T.); +#219772 = VERTEX_POINT('',#219773); +#219773 = CARTESIAN_POINT('',(171.218806,-65.866719,1.585)); +#219774 = LINE('',#219775,#219776); +#219775 = CARTESIAN_POINT('',(171.220028,-65.641801,1.585)); +#219776 = VECTOR('',#219777,1.); +#219777 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#219778 = ORIENTED_EDGE('',*,*,#219779,.T.); +#219779 = EDGE_CURVE('',#219772,#219780,#219782,.T.); +#219780 = VERTEX_POINT('',#219781); +#219781 = CARTESIAN_POINT('',(171.2053,-65.89695,1.585)); +#219782 = LINE('',#219783,#219784); +#219783 = CARTESIAN_POINT('',(171.218806,-65.866719,1.585)); +#219784 = VECTOR('',#219785,1.); +#219785 = DIRECTION('',(-0.407903101909,-0.913025223886,0.)); +#219786 = ORIENTED_EDGE('',*,*,#219787,.T.); +#219787 = EDGE_CURVE('',#219780,#219788,#219790,.T.); +#219788 = VERTEX_POINT('',#219789); +#219789 = CARTESIAN_POINT('',(171.208829,-65.983815,1.585)); +#219790 = CIRCLE('',#219791,7.226603459189E-02); +#219791 = AXIS2_PLACEMENT_3D('',#219792,#219793,#219794); +#219792 = CARTESIAN_POINT('',(171.149380946,-65.94272596701,1.585)); +#219793 = DIRECTION('',(0.,0.,-1.)); +#219794 = DIRECTION('',(0.773794415465,0.633436818156,0.)); +#219795 = ORIENTED_EDGE('',*,*,#219796,.T.); +#219796 = EDGE_CURVE('',#219788,#219797,#219799,.T.); +#219797 = VERTEX_POINT('',#219798); +#219798 = CARTESIAN_POINT('',(171.188137,-66.004507,1.585)); +#219799 = LINE('',#219800,#219801); +#219800 = CARTESIAN_POINT('',(171.208829,-65.983815,1.585)); +#219801 = VECTOR('',#219802,1.); +#219802 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#219803 = ORIENTED_EDGE('',*,*,#219804,.T.); +#219804 = EDGE_CURVE('',#219797,#219805,#219807,.T.); +#219805 = VERTEX_POINT('',#219806); +#219806 = CARTESIAN_POINT('',(171.146469,-66.017147,1.585)); +#219807 = LINE('',#219808,#219809); +#219808 = CARTESIAN_POINT('',(171.188137,-66.004507,1.585)); +#219809 = VECTOR('',#219810,1.); +#219810 = DIRECTION('',(-0.956939376321,-0.29028783999,0.)); +#219811 = ORIENTED_EDGE('',*,*,#219812,.T.); +#219812 = EDGE_CURVE('',#219805,#219813,#219815,.T.); +#219813 = VERTEX_POINT('',#219814); +#219814 = CARTESIAN_POINT('',(170.131837,-66.015706,1.585)); +#219815 = LINE('',#219816,#219817); +#219816 = CARTESIAN_POINT('',(171.146469,-66.017147,1.585)); +#219817 = VECTOR('',#219818,1.); +#219818 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#219819 = ORIENTED_EDGE('',*,*,#219820,.T.); +#219820 = EDGE_CURVE('',#219813,#219821,#219823,.T.); +#219821 = VERTEX_POINT('',#219822); +#219822 = CARTESIAN_POINT('',(170.146469,-65.867147,1.585)); +#219823 = CIRCLE('',#219824,7.500006711464E-02); +#219824 = AXIS2_PLACEMENT_3D('',#219825,#219826,#219827); +#219825 = CARTESIAN_POINT('',(170.14646893288,-65.94214706711,1.585)); +#219826 = DIRECTION('',(0.,0.,-1.)); +#219827 = DIRECTION('',(-0.195092263892,-0.980784894138,-0.)); +#219828 = ORIENTED_EDGE('',*,*,#219829,.T.); +#219829 = EDGE_CURVE('',#219821,#219830,#219832,.T.); +#219830 = VERTEX_POINT('',#219831); +#219831 = CARTESIAN_POINT('',(170.407465,-65.866718,1.585)); +#219832 = LINE('',#219833,#219834); +#219833 = CARTESIAN_POINT('',(170.146469,-65.867147,1.585)); +#219834 = VECTOR('',#219835,1.); +#219835 = DIRECTION('',(0.999998649122,1.643701131322E-03,0.)); +#219836 = ORIENTED_EDGE('',*,*,#219837,.T.); +#219837 = EDGE_CURVE('',#219830,#219838,#219840,.T.); +#219838 = VERTEX_POINT('',#219839); +#219839 = CARTESIAN_POINT('',(170.407465,-65.636624,1.585)); +#219840 = LINE('',#219841,#219842); +#219841 = CARTESIAN_POINT('',(170.407465,-65.866718,1.585)); +#219842 = VECTOR('',#219843,1.); +#219843 = DIRECTION('',(0.,1.,0.)); +#219844 = ORIENTED_EDGE('',*,*,#219845,.T.); +#219845 = EDGE_CURVE('',#219838,#219846,#219848,.T.); +#219846 = VERTEX_POINT('',#219847); +#219847 = CARTESIAN_POINT('',(170.469669,-65.513911,1.585)); +#219848 = LINE('',#219849,#219850); +#219849 = CARTESIAN_POINT('',(170.407465,-65.636624,1.585)); +#219850 = VECTOR('',#219851,1.); +#219851 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#219852 = ORIENTED_EDGE('',*,*,#219853,.T.); +#219853 = EDGE_CURVE('',#219846,#219745,#219854,.T.); +#219854 = LINE('',#219855,#219856); +#219855 = CARTESIAN_POINT('',(170.469669,-65.513911,1.585)); +#219856 = VECTOR('',#219857,1.); +#219857 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#219858 = FACE_BOUND('',#219859,.F.); +#219859 = EDGE_LOOP('',(#219860,#219871,#219879,#219887,#219895,#219903, + #219911,#219919,#219927,#219935)); +#219860 = ORIENTED_EDGE('',*,*,#219861,.T.); +#219861 = EDGE_CURVE('',#219862,#219864,#219866,.T.); +#219862 = VERTEX_POINT('',#219863); +#219863 = CARTESIAN_POINT('',(171.006803,-65.575215,1.585)); +#219864 = VERTEX_POINT('',#219865); +#219865 = CARTESIAN_POINT('',(170.619467,-65.575215,1.585)); +#219866 = CIRCLE('',#219867,0.358503491901); +#219867 = AXIS2_PLACEMENT_3D('',#219868,#219869,#219870); +#219868 = CARTESIAN_POINT('',(170.813135,-65.876906,1.585)); +#219869 = DIRECTION('',(0.,0.,1.)); +#219870 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#219871 = ORIENTED_EDGE('',*,*,#219872,.T.); +#219872 = EDGE_CURVE('',#219864,#219873,#219875,.T.); +#219873 = VERTEX_POINT('',#219874); +#219874 = CARTESIAN_POINT('',(170.58906,-65.605622,1.585)); +#219875 = LINE('',#219876,#219877); +#219876 = CARTESIAN_POINT('',(170.619467,-65.575215,1.585)); +#219877 = VECTOR('',#219878,1.); +#219878 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#219879 = ORIENTED_EDGE('',*,*,#219880,.T.); +#219880 = EDGE_CURVE('',#219873,#219881,#219883,.T.); +#219881 = VERTEX_POINT('',#219882); +#219882 = CARTESIAN_POINT('',(170.554802,-65.674138,1.585)); +#219883 = LINE('',#219884,#219885); +#219884 = CARTESIAN_POINT('',(170.58906,-65.605622,1.585)); +#219885 = VECTOR('',#219886,1.); +#219886 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#219887 = ORIENTED_EDGE('',*,*,#219888,.T.); +#219888 = EDGE_CURVE('',#219881,#219889,#219891,.T.); +#219889 = VERTEX_POINT('',#219890); +#219890 = CARTESIAN_POINT('',(170.554802,-65.829204,1.585)); +#219891 = LINE('',#219892,#219893); +#219892 = CARTESIAN_POINT('',(170.554802,-65.674138,1.585)); +#219893 = VECTOR('',#219894,1.); +#219894 = DIRECTION('',(0.,-1.,0.)); +#219895 = ORIENTED_EDGE('',*,*,#219896,.T.); +#219896 = EDGE_CURVE('',#219889,#219897,#219899,.T.); +#219897 = VERTEX_POINT('',#219898); +#219898 = CARTESIAN_POINT('',(170.573773,-65.867147,1.585)); +#219899 = LINE('',#219900,#219901); +#219900 = CARTESIAN_POINT('',(170.554802,-65.829204,1.585)); +#219901 = VECTOR('',#219902,1.); +#219902 = DIRECTION('',(0.447204166258,-0.894431905559,0.)); +#219903 = ORIENTED_EDGE('',*,*,#219904,.T.); +#219904 = EDGE_CURVE('',#219897,#219905,#219907,.T.); +#219905 = VERTEX_POINT('',#219906); +#219906 = CARTESIAN_POINT('',(171.052498,-65.867147,1.585)); +#219907 = LINE('',#219908,#219909); +#219908 = CARTESIAN_POINT('',(170.573773,-65.867147,1.585)); +#219909 = VECTOR('',#219910,1.); +#219910 = DIRECTION('',(1.,0.,0.)); +#219911 = ORIENTED_EDGE('',*,*,#219912,.T.); +#219912 = EDGE_CURVE('',#219905,#219913,#219915,.T.); +#219913 = VERTEX_POINT('',#219914); +#219914 = CARTESIAN_POINT('',(171.071469,-65.829204,1.585)); +#219915 = LINE('',#219916,#219917); +#219916 = CARTESIAN_POINT('',(171.052498,-65.867147,1.585)); +#219917 = VECTOR('',#219918,1.); +#219918 = DIRECTION('',(0.447204166258,0.894431905559,0.)); +#219919 = ORIENTED_EDGE('',*,*,#219920,.T.); +#219920 = EDGE_CURVE('',#219913,#219921,#219923,.T.); +#219921 = VERTEX_POINT('',#219922); +#219922 = CARTESIAN_POINT('',(171.071469,-65.674138,1.585)); +#219923 = LINE('',#219924,#219925); +#219924 = CARTESIAN_POINT('',(171.071469,-65.829204,1.585)); +#219925 = VECTOR('',#219926,1.); +#219926 = DIRECTION('',(0.,1.,0.)); +#219927 = ORIENTED_EDGE('',*,*,#219928,.T.); +#219928 = EDGE_CURVE('',#219921,#219929,#219931,.T.); +#219929 = VERTEX_POINT('',#219930); +#219930 = CARTESIAN_POINT('',(171.037211,-65.605622,1.585)); +#219931 = LINE('',#219932,#219933); +#219932 = CARTESIAN_POINT('',(171.071469,-65.674138,1.585)); +#219933 = VECTOR('',#219934,1.); +#219934 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#219935 = ORIENTED_EDGE('',*,*,#219936,.T.); +#219936 = EDGE_CURVE('',#219929,#219862,#219937,.T.); +#219937 = LINE('',#219938,#219939); +#219938 = CARTESIAN_POINT('',(171.037211,-65.605622,1.585)); +#219939 = VECTOR('',#219940,1.); +#219940 = DIRECTION('',(-0.707118408268,0.707095153913,0.)); +#219941 = PLANE('',#219942); +#219942 = AXIS2_PLACEMENT_3D('',#219943,#219944,#219945); +#219943 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219944 = DIRECTION('',(0.,0.,1.)); +#219945 = DIRECTION('',(1.,0.,-0.)); +#219946 = SHELL_BASED_SURFACE_MODEL('',(#219947)); +#219947 = OPEN_SHELL('',(#219948)); +#219948 = ADVANCED_FACE('',(#219949),#219985,.T.); +#219949 = FACE_BOUND('',#219950,.F.); +#219950 = EDGE_LOOP('',(#219951,#219962,#219970,#219979)); +#219951 = ORIENTED_EDGE('',*,*,#219952,.T.); +#219952 = EDGE_CURVE('',#219953,#219955,#219957,.T.); +#219953 = VERTEX_POINT('',#219954); +#219954 = CARTESIAN_POINT('',(177.954392,-65.4056,1.585)); +#219955 = VERTEX_POINT('',#219956); +#219956 = CARTESIAN_POINT('',(177.954392,-65.2856,1.585)); +#219957 = CIRCLE('',#219958,6.000000000042E-02); +#219958 = AXIS2_PLACEMENT_3D('',#219959,#219960,#219961); +#219959 = CARTESIAN_POINT('',(177.95439177441,-65.3456,1.585)); +#219960 = DIRECTION('',(0.,0.,-1.)); +#219961 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#219962 = ORIENTED_EDGE('',*,*,#219963,.T.); +#219963 = EDGE_CURVE('',#219955,#219964,#219966,.T.); +#219964 = VERTEX_POINT('',#219965); +#219965 = CARTESIAN_POINT('',(178.428908,-65.2856,1.585)); +#219966 = LINE('',#219967,#219968); +#219967 = CARTESIAN_POINT('',(177.954392,-65.2856,1.585)); +#219968 = VECTOR('',#219969,1.); +#219969 = DIRECTION('',(1.,0.,0.)); +#219970 = ORIENTED_EDGE('',*,*,#219971,.T.); +#219971 = EDGE_CURVE('',#219964,#219972,#219974,.T.); +#219972 = VERTEX_POINT('',#219973); +#219973 = CARTESIAN_POINT('',(178.428908,-65.4056,1.585)); +#219974 = CIRCLE('',#219975,6.000000000042E-02); +#219975 = AXIS2_PLACEMENT_3D('',#219976,#219977,#219978); +#219976 = CARTESIAN_POINT('',(178.42890822558,-65.3456,1.585)); +#219977 = DIRECTION('',(0.,0.,-1.)); +#219978 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#219979 = ORIENTED_EDGE('',*,*,#219980,.T.); +#219980 = EDGE_CURVE('',#219972,#219953,#219981,.T.); +#219981 = LINE('',#219982,#219983); +#219982 = CARTESIAN_POINT('',(178.428908,-65.4056,1.585)); +#219983 = VECTOR('',#219984,1.); +#219984 = DIRECTION('',(-1.,0.,0.)); +#219985 = PLANE('',#219986); +#219986 = AXIS2_PLACEMENT_3D('',#219987,#219988,#219989); +#219987 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219988 = DIRECTION('',(0.,0.,1.)); +#219989 = DIRECTION('',(1.,0.,-0.)); +#219990 = SHELL_BASED_SURFACE_MODEL('',(#219991)); +#219991 = OPEN_SHELL('',(#219992)); +#219992 = ADVANCED_FACE('',(#219993),#220095,.T.); +#219993 = FACE_BOUND('',#219994,.F.); +#219994 = EDGE_LOOP('',(#219995,#220005,#220014,#220022,#220030,#220038, + #220047,#220055,#220064,#220072,#220080,#220089)); +#219995 = ORIENTED_EDGE('',*,*,#219996,.T.); +#219996 = EDGE_CURVE('',#219997,#219999,#220001,.T.); +#219997 = VERTEX_POINT('',#219998); +#219998 = CARTESIAN_POINT('',(170.772553,-64.843118,1.585)); +#219999 = VERTEX_POINT('',#220000); +#220000 = CARTESIAN_POINT('',(171.114039,-64.588806,1.585)); +#220001 = LINE('',#220002,#220003); +#220002 = CARTESIAN_POINT('',(170.772553,-64.843118,1.585)); +#220003 = VECTOR('',#220004,1.); +#220004 = DIRECTION('',(0.802027454749,0.597287168646,0.)); +#220005 = ORIENTED_EDGE('',*,*,#220006,.T.); +#220006 = EDGE_CURVE('',#219999,#220007,#220009,.T.); +#220007 = VERTEX_POINT('',#220008); +#220008 = CARTESIAN_POINT('',(171.191469,-64.716433,1.585)); +#220009 = CIRCLE('',#220010,7.500042710847E-02); +#220010 = AXIS2_PLACEMENT_3D('',#220011,#220012,#220013); +#220011 = CARTESIAN_POINT('',(171.1464684465,-64.65643288123,1.585)); +#220012 = DIRECTION('',(0.,0.,-1.)); +#220013 = DIRECTION('',(-0.432390157695,0.901686614921,-0.)); +#220014 = ORIENTED_EDGE('',*,*,#220015,.T.); +#220015 = EDGE_CURVE('',#220007,#220016,#220018,.T.); +#220016 = VERTEX_POINT('',#220017); +#220017 = CARTESIAN_POINT('',(170.879696,-64.950261,1.585)); +#220018 = LINE('',#220019,#220020); +#220019 = CARTESIAN_POINT('',(171.191469,-64.716433,1.585)); +#220020 = VECTOR('',#220021,1.); +#220021 = DIRECTION('',(-0.800002155415,-0.599997126103,0.)); +#220022 = ORIENTED_EDGE('',*,*,#220023,.T.); +#220023 = EDGE_CURVE('',#220016,#220024,#220026,.T.); +#220024 = VERTEX_POINT('',#220025); +#220025 = CARTESIAN_POINT('',(170.89182,-64.962385,1.585)); +#220026 = LINE('',#220027,#220028); +#220027 = CARTESIAN_POINT('',(170.879696,-64.950261,1.585)); +#220028 = VECTOR('',#220029,1.); +#220029 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#220030 = ORIENTED_EDGE('',*,*,#220031,.T.); +#220031 = EDGE_CURVE('',#220024,#220032,#220034,.T.); +#220032 = VERTEX_POINT('',#220033); +#220033 = CARTESIAN_POINT('',(171.161101,-64.963826,1.585)); +#220034 = LINE('',#220035,#220036); +#220035 = CARTESIAN_POINT('',(170.89182,-64.962385,1.585)); +#220036 = VECTOR('',#220037,1.); +#220037 = DIRECTION('',(0.99998568217,-5.351210698141E-03,0.)); +#220038 = ORIENTED_EDGE('',*,*,#220039,.T.); +#220039 = EDGE_CURVE('',#220032,#220040,#220042,.T.); +#220040 = VERTEX_POINT('',#220041); +#220041 = CARTESIAN_POINT('',(171.146469,-65.112385,1.585)); +#220042 = CIRCLE('',#220043,7.500006711464E-02); +#220043 = AXIS2_PLACEMENT_3D('',#220044,#220045,#220046); +#220044 = CARTESIAN_POINT('',(171.14646906711,-65.03738493288,1.585)); +#220045 = DIRECTION('',(0.,0.,-1.)); +#220046 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#220047 = ORIENTED_EDGE('',*,*,#220048,.T.); +#220048 = EDGE_CURVE('',#220040,#220049,#220051,.T.); +#220049 = VERTEX_POINT('',#220050); +#220050 = CARTESIAN_POINT('',(170.131837,-65.110944,1.585)); +#220051 = LINE('',#220052,#220053); +#220052 = CARTESIAN_POINT('',(171.146469,-65.112385,1.585)); +#220053 = VECTOR('',#220054,1.); +#220054 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#220055 = ORIENTED_EDGE('',*,*,#220056,.T.); +#220056 = EDGE_CURVE('',#220049,#220057,#220059,.T.); +#220057 = VERTEX_POINT('',#220058); +#220058 = CARTESIAN_POINT('',(170.146469,-64.962385,1.585)); +#220059 = CIRCLE('',#220060,7.500006711464E-02); +#220060 = AXIS2_PLACEMENT_3D('',#220061,#220062,#220063); +#220061 = CARTESIAN_POINT('',(170.14646893288,-65.03738506711,1.585)); +#220062 = DIRECTION('',(0.,0.,-1.)); +#220063 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#220064 = ORIENTED_EDGE('',*,*,#220065,.T.); +#220065 = EDGE_CURVE('',#220057,#220066,#220068,.T.); +#220066 = VERTEX_POINT('',#220067); +#220067 = CARTESIAN_POINT('',(170.679688,-64.962385,1.585)); +#220068 = LINE('',#220069,#220070); +#220069 = CARTESIAN_POINT('',(170.146469,-64.962385,1.585)); +#220070 = VECTOR('',#220071,1.); +#220071 = DIRECTION('',(1.,0.,0.)); +#220072 = ORIENTED_EDGE('',*,*,#220073,.T.); +#220073 = EDGE_CURVE('',#220066,#220074,#220076,.T.); +#220074 = VERTEX_POINT('',#220075); +#220075 = CARTESIAN_POINT('',(170.417442,-64.698101,1.585)); +#220076 = LINE('',#220077,#220078); +#220077 = CARTESIAN_POINT('',(170.679688,-64.962385,1.585)); +#220078 = VECTOR('',#220079,1.); +#220079 = DIRECTION('',(-0.704364559963,0.709838408842,0.)); +#220080 = ORIENTED_EDGE('',*,*,#220081,.T.); +#220081 = EDGE_CURVE('',#220074,#220082,#220084,.T.); +#220082 = VERTEX_POINT('',#220083); +#220083 = CARTESIAN_POINT('',(170.532835,-64.6034,1.585)); +#220084 = CIRCLE('',#220085,7.499996838528E-02); +#220085 = AXIS2_PLACEMENT_3D('',#220086,#220087,#220088); +#220086 = CARTESIAN_POINT('',(170.47980202753,-64.656433,1.585)); +#220087 = DIRECTION('',(0.,0.,-1.)); +#220088 = DIRECTION('',(-0.831467384248,-0.555573567524,-0.)); +#220089 = ORIENTED_EDGE('',*,*,#220090,.T.); +#220090 = EDGE_CURVE('',#220082,#219997,#220091,.T.); +#220091 = LINE('',#220092,#220093); +#220092 = CARTESIAN_POINT('',(170.532835,-64.6034,1.585)); +#220093 = VECTOR('',#220094,1.); +#220094 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#220095 = PLANE('',#220096); +#220096 = AXIS2_PLACEMENT_3D('',#220097,#220098,#220099); +#220097 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220098 = DIRECTION('',(0.,0.,1.)); +#220099 = DIRECTION('',(1.,0.,-0.)); +#220100 = SHELL_BASED_SURFACE_MODEL('',(#220101)); +#220101 = OPEN_SHELL('',(#220102)); +#220102 = ADVANCED_FACE('',(#220103),#220197,.T.); +#220103 = FACE_BOUND('',#220104,.F.); +#220104 = EDGE_LOOP('',(#220105,#220116,#220124,#220133,#220141,#220150, + #220158,#220167,#220175,#220183,#220191)); +#220105 = ORIENTED_EDGE('',*,*,#220106,.T.); +#220106 = EDGE_CURVE('',#220107,#220109,#220111,.T.); +#220107 = VERTEX_POINT('',#220108); +#220108 = CARTESIAN_POINT('',(183.896217,-63.860139,1.585)); +#220109 = VERTEX_POINT('',#220110); +#220110 = CARTESIAN_POINT('',(184.01165,-63.8831,1.585)); +#220111 = CIRCLE('',#220112,6.000007318647E-02); +#220112 = AXIS2_PLACEMENT_3D('',#220113,#220114,#220115); +#220113 = CARTESIAN_POINT('',(183.95164992681,-63.88309982331,1.585)); +#220114 = DIRECTION('',(0.,0.,-1.)); +#220115 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#220116 = ORIENTED_EDGE('',*,*,#220117,.T.); +#220117 = EDGE_CURVE('',#220109,#220118,#220120,.T.); +#220118 = VERTEX_POINT('',#220119); +#220119 = CARTESIAN_POINT('',(184.01165,-64.8831,1.585)); +#220120 = LINE('',#220121,#220122); +#220121 = CARTESIAN_POINT('',(184.01165,-63.8831,1.585)); +#220122 = VECTOR('',#220123,1.); +#220123 = DIRECTION('',(0.,-1.,0.)); +#220124 = ORIENTED_EDGE('',*,*,#220125,.T.); +#220125 = EDGE_CURVE('',#220118,#220126,#220128,.T.); +#220126 = VERTEX_POINT('',#220127); +#220127 = CARTESIAN_POINT('',(183.95165,-64.9431,1.585)); +#220128 = CIRCLE('',#220129,5.999932016265E-02); +#220129 = AXIS2_PLACEMENT_3D('',#220130,#220131,#220132); +#220130 = CARTESIAN_POINT('',(183.95165067984,-64.88310067984,1.585)); +#220131 = DIRECTION('',(0.,0.,-1.)); +#220132 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#220133 = ORIENTED_EDGE('',*,*,#220134,.T.); +#220134 = EDGE_CURVE('',#220126,#220135,#220137,.T.); +#220135 = VERTEX_POINT('',#220136); +#220136 = CARTESIAN_POINT('',(182.43165,-64.9431,1.585)); +#220137 = LINE('',#220138,#220139); +#220138 = CARTESIAN_POINT('',(183.95165,-64.9431,1.585)); +#220139 = VECTOR('',#220140,1.); +#220140 = DIRECTION('',(-1.,0.,0.)); +#220141 = ORIENTED_EDGE('',*,*,#220142,.T.); +#220142 = EDGE_CURVE('',#220135,#220143,#220145,.T.); +#220143 = VERTEX_POINT('',#220144); +#220144 = CARTESIAN_POINT('',(182.37165,-64.8831,1.585)); +#220145 = CIRCLE('',#220146,5.999932016258E-02); +#220146 = AXIS2_PLACEMENT_3D('',#220147,#220148,#220149); +#220147 = CARTESIAN_POINT('',(182.43164932015,-64.88310067984,1.585)); +#220148 = DIRECTION('',(0.,0.,-1.)); +#220149 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#220150 = ORIENTED_EDGE('',*,*,#220151,.T.); +#220151 = EDGE_CURVE('',#220143,#220152,#220154,.T.); +#220152 = VERTEX_POINT('',#220153); +#220153 = CARTESIAN_POINT('',(182.37165,-64.8331,1.585)); +#220154 = LINE('',#220155,#220156); +#220155 = CARTESIAN_POINT('',(182.37165,-64.8831,1.585)); +#220156 = VECTOR('',#220157,1.); +#220157 = DIRECTION('',(0.,1.,0.)); +#220158 = ORIENTED_EDGE('',*,*,#220159,.T.); +#220159 = EDGE_CURVE('',#220152,#220160,#220162,.T.); +#220160 = VERTEX_POINT('',#220161); +#220161 = CARTESIAN_POINT('',(182.487083,-64.810139,1.585)); +#220162 = CIRCLE('',#220163,6.000007318648E-02); +#220163 = AXIS2_PLACEMENT_3D('',#220164,#220165,#220166); +#220164 = CARTESIAN_POINT('',(182.43165007318,-64.83309982331,1.585)); +#220165 = DIRECTION('',(0.,0.,-1.)); +#220166 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#220167 = ORIENTED_EDGE('',*,*,#220168,.T.); +#220168 = EDGE_CURVE('',#220160,#220169,#220171,.T.); +#220169 = VERTEX_POINT('',#220170); +#220170 = CARTESIAN_POINT('',(182.489661,-64.8231,1.585)); +#220171 = LINE('',#220172,#220173); +#220172 = CARTESIAN_POINT('',(182.487083,-64.810139,1.585)); +#220173 = VECTOR('',#220174,1.); +#220174 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#220175 = ORIENTED_EDGE('',*,*,#220176,.T.); +#220176 = EDGE_CURVE('',#220169,#220177,#220179,.T.); +#220177 = VERTEX_POINT('',#220178); +#220178 = CARTESIAN_POINT('',(183.89165,-64.8231,1.585)); +#220179 = LINE('',#220180,#220181); +#220180 = CARTESIAN_POINT('',(182.489661,-64.8231,1.585)); +#220181 = VECTOR('',#220182,1.); +#220182 = DIRECTION('',(1.,0.,0.)); +#220183 = ORIENTED_EDGE('',*,*,#220184,.T.); +#220184 = EDGE_CURVE('',#220177,#220185,#220187,.T.); +#220185 = VERTEX_POINT('',#220186); +#220186 = CARTESIAN_POINT('',(183.89165,-63.8831,1.585)); +#220187 = LINE('',#220188,#220189); +#220188 = CARTESIAN_POINT('',(183.89165,-64.8231,1.585)); +#220189 = VECTOR('',#220190,1.); +#220190 = DIRECTION('',(0.,1.,0.)); +#220191 = ORIENTED_EDGE('',*,*,#220192,.T.); +#220192 = EDGE_CURVE('',#220185,#220107,#220193,.T.); +#220193 = LINE('',#220194,#220195); +#220194 = CARTESIAN_POINT('',(183.89165,-63.8831,1.585)); +#220195 = VECTOR('',#220196,1.); +#220196 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#220197 = PLANE('',#220198); +#220198 = AXIS2_PLACEMENT_3D('',#220199,#220200,#220201); +#220199 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220200 = DIRECTION('',(0.,0.,1.)); +#220201 = DIRECTION('',(1.,0.,-0.)); +#220202 = SHELL_BASED_SURFACE_MODEL('',(#220203)); +#220203 = OPEN_SHELL('',(#220204)); +#220204 = ADVANCED_FACE('',(#220205),#220274,.T.); +#220205 = FACE_BOUND('',#220206,.F.); +#220206 = EDGE_LOOP('',(#220207,#220218,#220226,#220234,#220243,#220251, + #220260,#220268)); +#220207 = ORIENTED_EDGE('',*,*,#220208,.T.); +#220208 = EDGE_CURVE('',#220209,#220211,#220213,.T.); +#220209 = VERTEX_POINT('',#220210); +#220210 = CARTESIAN_POINT('',(207.386217,-63.400139,1.585)); +#220211 = VERTEX_POINT('',#220212); +#220212 = CARTESIAN_POINT('',(207.50165,-63.4231,1.585)); +#220213 = CIRCLE('',#220214,6.000007318649E-02); +#220214 = AXIS2_PLACEMENT_3D('',#220215,#220216,#220217); +#220215 = CARTESIAN_POINT('',(207.44164992681,-63.42309982331,1.585)); +#220216 = DIRECTION('',(0.,0.,-1.)); +#220217 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#220218 = ORIENTED_EDGE('',*,*,#220219,.T.); +#220219 = EDGE_CURVE('',#220211,#220220,#220222,.T.); +#220220 = VERTEX_POINT('',#220221); +#220221 = CARTESIAN_POINT('',(207.50165,-64.6131,1.585)); +#220222 = LINE('',#220223,#220224); +#220223 = CARTESIAN_POINT('',(207.50165,-63.4231,1.585)); +#220224 = VECTOR('',#220225,1.); +#220225 = DIRECTION('',(0.,-1.,0.)); +#220226 = ORIENTED_EDGE('',*,*,#220227,.T.); +#220227 = EDGE_CURVE('',#220220,#220228,#220230,.T.); +#220228 = VERTEX_POINT('',#220229); +#220229 = CARTESIAN_POINT('',(208.69165,-64.6131,1.585)); +#220230 = LINE('',#220231,#220232); +#220231 = CARTESIAN_POINT('',(207.50165,-64.6131,1.585)); +#220232 = VECTOR('',#220233,1.); +#220233 = DIRECTION('',(1.,0.,0.)); +#220234 = ORIENTED_EDGE('',*,*,#220235,.T.); +#220235 = EDGE_CURVE('',#220228,#220236,#220238,.T.); +#220236 = VERTEX_POINT('',#220237); +#220237 = CARTESIAN_POINT('',(208.69165,-64.7331,1.585)); +#220238 = CIRCLE('',#220239,6.000000000042E-02); +#220239 = AXIS2_PLACEMENT_3D('',#220240,#220241,#220242); +#220240 = CARTESIAN_POINT('',(208.69165022558,-64.6731,1.585)); +#220241 = DIRECTION('',(0.,0.,-1.)); +#220242 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#220243 = ORIENTED_EDGE('',*,*,#220244,.T.); +#220244 = EDGE_CURVE('',#220236,#220245,#220247,.T.); +#220245 = VERTEX_POINT('',#220246); +#220246 = CARTESIAN_POINT('',(207.44165,-64.7331,1.585)); +#220247 = LINE('',#220248,#220249); +#220248 = CARTESIAN_POINT('',(208.69165,-64.7331,1.585)); +#220249 = VECTOR('',#220250,1.); +#220250 = DIRECTION('',(-1.,0.,0.)); +#220251 = ORIENTED_EDGE('',*,*,#220252,.T.); +#220252 = EDGE_CURVE('',#220245,#220253,#220255,.T.); +#220253 = VERTEX_POINT('',#220254); +#220254 = CARTESIAN_POINT('',(207.38165,-64.6731,1.585)); +#220255 = CIRCLE('',#220256,5.999932016257E-02); +#220256 = AXIS2_PLACEMENT_3D('',#220257,#220258,#220259); +#220257 = CARTESIAN_POINT('',(207.44164932015,-64.67310067984,1.585)); +#220258 = DIRECTION('',(0.,0.,-1.)); +#220259 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#220260 = ORIENTED_EDGE('',*,*,#220261,.T.); +#220261 = EDGE_CURVE('',#220253,#220262,#220264,.T.); +#220262 = VERTEX_POINT('',#220263); +#220263 = CARTESIAN_POINT('',(207.38165,-63.4231,1.585)); +#220264 = LINE('',#220265,#220266); +#220265 = CARTESIAN_POINT('',(207.38165,-64.6731,1.585)); +#220266 = VECTOR('',#220267,1.); +#220267 = DIRECTION('',(0.,1.,0.)); +#220268 = ORIENTED_EDGE('',*,*,#220269,.T.); +#220269 = EDGE_CURVE('',#220262,#220209,#220270,.T.); +#220270 = LINE('',#220271,#220272); +#220271 = CARTESIAN_POINT('',(207.38165,-63.4231,1.585)); +#220272 = VECTOR('',#220273,1.); +#220273 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#220274 = PLANE('',#220275); +#220275 = AXIS2_PLACEMENT_3D('',#220276,#220277,#220278); +#220276 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220277 = DIRECTION('',(0.,0.,1.)); +#220278 = DIRECTION('',(1.,0.,-0.)); +#220279 = SHELL_BASED_SURFACE_MODEL('',(#220280)); +#220280 = OPEN_SHELL('',(#220281)); +#220281 = ADVANCED_FACE('',(#220282,#220352,#220536,#220620,#220654, + #220688),#220722,.T.); +#220282 = FACE_BOUND('',#220283,.F.); +#220283 = EDGE_LOOP('',(#220284,#220295,#220303,#220312,#220320,#220329, + #220337,#220346)); +#220284 = ORIENTED_EDGE('',*,*,#220285,.T.); +#220285 = EDGE_CURVE('',#220286,#220288,#220290,.T.); +#220286 = VERTEX_POINT('',#220287); +#220287 = CARTESIAN_POINT('',(207.67165,-51.7631,1.585)); +#220288 = VERTEX_POINT('',#220289); +#220289 = CARTESIAN_POINT('',(207.73165,-51.7031,1.585)); +#220290 = CIRCLE('',#220291,5.999932016262E-02); +#220291 = AXIS2_PLACEMENT_3D('',#220292,#220293,#220294); +#220292 = CARTESIAN_POINT('',(207.73164932015,-51.76309932015,1.585)); +#220293 = DIRECTION('',(0.,0.,-1.)); +#220294 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#220295 = ORIENTED_EDGE('',*,*,#220296,.T.); +#220296 = EDGE_CURVE('',#220288,#220297,#220299,.T.); +#220297 = VERTEX_POINT('',#220298); +#220298 = CARTESIAN_POINT('',(213.70165,-51.7031,1.585)); +#220299 = LINE('',#220300,#220301); +#220300 = CARTESIAN_POINT('',(207.73165,-51.7031,1.585)); +#220301 = VECTOR('',#220302,1.); +#220302 = DIRECTION('',(1.,0.,0.)); +#220303 = ORIENTED_EDGE('',*,*,#220304,.T.); +#220304 = EDGE_CURVE('',#220297,#220305,#220307,.T.); +#220305 = VERTEX_POINT('',#220306); +#220306 = CARTESIAN_POINT('',(213.76165,-51.7631,1.585)); +#220307 = CIRCLE('',#220308,5.999932016259E-02); +#220308 = AXIS2_PLACEMENT_3D('',#220309,#220310,#220311); +#220309 = CARTESIAN_POINT('',(213.70165067984,-51.76309932015,1.585)); +#220310 = DIRECTION('',(0.,0.,-1.)); +#220311 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#220312 = ORIENTED_EDGE('',*,*,#220313,.T.); +#220313 = EDGE_CURVE('',#220305,#220314,#220316,.T.); +#220314 = VERTEX_POINT('',#220315); +#220315 = CARTESIAN_POINT('',(213.76165,-64.3831,1.585)); +#220316 = LINE('',#220317,#220318); +#220317 = CARTESIAN_POINT('',(213.76165,-51.7631,1.585)); +#220318 = VECTOR('',#220319,1.); +#220319 = DIRECTION('',(0.,-1.,0.)); +#220320 = ORIENTED_EDGE('',*,*,#220321,.T.); +#220321 = EDGE_CURVE('',#220314,#220322,#220324,.T.); +#220322 = VERTEX_POINT('',#220323); +#220323 = CARTESIAN_POINT('',(213.70165,-64.4431,1.585)); +#220324 = CIRCLE('',#220325,5.999932016265E-02); +#220325 = AXIS2_PLACEMENT_3D('',#220326,#220327,#220328); +#220326 = CARTESIAN_POINT('',(213.70165067984,-64.38310067984,1.585)); +#220327 = DIRECTION('',(0.,0.,-1.)); +#220328 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#220329 = ORIENTED_EDGE('',*,*,#220330,.T.); +#220330 = EDGE_CURVE('',#220322,#220331,#220333,.T.); +#220331 = VERTEX_POINT('',#220332); +#220332 = CARTESIAN_POINT('',(207.73165,-64.4431,1.585)); +#220333 = LINE('',#220334,#220335); +#220334 = CARTESIAN_POINT('',(213.70165,-64.4431,1.585)); +#220335 = VECTOR('',#220336,1.); +#220336 = DIRECTION('',(-1.,0.,0.)); +#220337 = ORIENTED_EDGE('',*,*,#220338,.T.); +#220338 = EDGE_CURVE('',#220331,#220339,#220341,.T.); +#220339 = VERTEX_POINT('',#220340); +#220340 = CARTESIAN_POINT('',(207.67165,-64.3831,1.585)); +#220341 = CIRCLE('',#220342,5.999932016256E-02); +#220342 = AXIS2_PLACEMENT_3D('',#220343,#220344,#220345); +#220343 = CARTESIAN_POINT('',(207.73164932015,-64.38310067984,1.585)); +#220344 = DIRECTION('',(0.,0.,-1.)); +#220345 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#220346 = ORIENTED_EDGE('',*,*,#220347,.T.); +#220347 = EDGE_CURVE('',#220339,#220286,#220348,.T.); +#220348 = LINE('',#220349,#220350); +#220349 = CARTESIAN_POINT('',(207.67165,-64.3831,1.585)); +#220350 = VECTOR('',#220351,1.); +#220351 = DIRECTION('',(0.,1.,0.)); +#220352 = FACE_BOUND('',#220353,.F.); +#220353 = EDGE_LOOP('',(#220354,#220365,#220373,#220381,#220389,#220398, + #220406,#220414,#220422,#220431,#220439,#220448,#220456,#220464, + #220472,#220481,#220489,#220497,#220505,#220514,#220522,#220530)); +#220354 = ORIENTED_EDGE('',*,*,#220355,.T.); +#220355 = EDGE_CURVE('',#220356,#220358,#220360,.T.); +#220356 = VERTEX_POINT('',#220357); +#220357 = CARTESIAN_POINT('',(209.99165,-52.5831,1.585)); +#220358 = VERTEX_POINT('',#220359); +#220359 = CARTESIAN_POINT('',(209.93165,-52.5231,1.585)); +#220360 = CIRCLE('',#220361,5.999932016261E-02); +#220361 = AXIS2_PLACEMENT_3D('',#220362,#220363,#220364); +#220362 = CARTESIAN_POINT('',(209.99164932015,-52.52310067984,1.585)); +#220363 = DIRECTION('',(0.,0.,-1.)); +#220364 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#220365 = ORIENTED_EDGE('',*,*,#220366,.T.); +#220366 = EDGE_CURVE('',#220358,#220367,#220369,.T.); +#220367 = VERTEX_POINT('',#220368); +#220368 = CARTESIAN_POINT('',(209.93165,-51.8231,1.585)); +#220369 = LINE('',#220370,#220371); +#220370 = CARTESIAN_POINT('',(209.93165,-52.5231,1.585)); +#220371 = VECTOR('',#220372,1.); +#220372 = DIRECTION('',(0.,1.,0.)); +#220373 = ORIENTED_EDGE('',*,*,#220374,.T.); +#220374 = EDGE_CURVE('',#220367,#220375,#220377,.T.); +#220375 = VERTEX_POINT('',#220376); +#220376 = CARTESIAN_POINT('',(208.55165,-51.8231,1.585)); +#220377 = LINE('',#220378,#220379); +#220378 = CARTESIAN_POINT('',(209.93165,-51.8231,1.585)); +#220379 = VECTOR('',#220380,1.); +#220380 = DIRECTION('',(-1.,0.,0.)); +#220381 = ORIENTED_EDGE('',*,*,#220382,.T.); +#220382 = EDGE_CURVE('',#220375,#220383,#220385,.T.); +#220383 = VERTEX_POINT('',#220384); +#220384 = CARTESIAN_POINT('',(208.55165,-53.5731,1.585)); +#220385 = LINE('',#220386,#220387); +#220386 = CARTESIAN_POINT('',(208.55165,-51.8231,1.585)); +#220387 = VECTOR('',#220388,1.); +#220388 = DIRECTION('',(0.,-1.,0.)); +#220389 = ORIENTED_EDGE('',*,*,#220390,.T.); +#220390 = EDGE_CURVE('',#220383,#220391,#220393,.T.); +#220391 = VERTEX_POINT('',#220392); +#220392 = CARTESIAN_POINT('',(208.49165,-53.6331,1.585)); +#220393 = CIRCLE('',#220394,5.999932016262E-02); +#220394 = AXIS2_PLACEMENT_3D('',#220395,#220396,#220397); +#220395 = CARTESIAN_POINT('',(208.49165067984,-53.57310067984,1.585)); +#220396 = DIRECTION('',(0.,0.,-1.)); +#220397 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#220398 = ORIENTED_EDGE('',*,*,#220399,.T.); +#220399 = EDGE_CURVE('',#220391,#220400,#220402,.T.); +#220400 = VERTEX_POINT('',#220401); +#220401 = CARTESIAN_POINT('',(207.79165,-53.6331,1.585)); +#220402 = LINE('',#220403,#220404); +#220403 = CARTESIAN_POINT('',(208.49165,-53.6331,1.585)); +#220404 = VECTOR('',#220405,1.); +#220405 = DIRECTION('',(-1.,0.,0.)); +#220406 = ORIENTED_EDGE('',*,*,#220407,.T.); +#220407 = EDGE_CURVE('',#220400,#220408,#220410,.T.); +#220408 = VERTEX_POINT('',#220409); +#220409 = CARTESIAN_POINT('',(207.79165,-55.0131,1.585)); +#220410 = LINE('',#220411,#220412); +#220411 = CARTESIAN_POINT('',(207.79165,-53.6331,1.585)); +#220412 = VECTOR('',#220413,1.); +#220413 = DIRECTION('',(0.,-1.,0.)); +#220414 = ORIENTED_EDGE('',*,*,#220415,.T.); +#220415 = EDGE_CURVE('',#220408,#220416,#220418,.T.); +#220416 = VERTEX_POINT('',#220417); +#220417 = CARTESIAN_POINT('',(208.49165,-55.0131,1.585)); +#220418 = LINE('',#220419,#220420); +#220419 = CARTESIAN_POINT('',(207.79165,-55.0131,1.585)); +#220420 = VECTOR('',#220421,1.); +#220421 = DIRECTION('',(1.,0.,0.)); +#220422 = ORIENTED_EDGE('',*,*,#220423,.T.); +#220423 = EDGE_CURVE('',#220416,#220424,#220426,.T.); +#220424 = VERTEX_POINT('',#220425); +#220425 = CARTESIAN_POINT('',(208.55165,-55.0731,1.585)); +#220426 = CIRCLE('',#220427,5.999932016259E-02); +#220427 = AXIS2_PLACEMENT_3D('',#220428,#220429,#220430); +#220428 = CARTESIAN_POINT('',(208.49165067984,-55.07309932015,1.585)); +#220429 = DIRECTION('',(0.,0.,-1.)); +#220430 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#220431 = ORIENTED_EDGE('',*,*,#220432,.T.); +#220432 = EDGE_CURVE('',#220424,#220433,#220435,.T.); +#220433 = VERTEX_POINT('',#220434); +#220434 = CARTESIAN_POINT('',(208.55165,-61.0731,1.585)); +#220435 = LINE('',#220436,#220437); +#220436 = CARTESIAN_POINT('',(208.55165,-55.0731,1.585)); +#220437 = VECTOR('',#220438,1.); +#220438 = DIRECTION('',(0.,-1.,0.)); +#220439 = ORIENTED_EDGE('',*,*,#220440,.T.); +#220440 = EDGE_CURVE('',#220433,#220441,#220443,.T.); +#220441 = VERTEX_POINT('',#220442); +#220442 = CARTESIAN_POINT('',(208.49165,-61.1331,1.585)); +#220443 = CIRCLE('',#220444,5.999932016262E-02); +#220444 = AXIS2_PLACEMENT_3D('',#220445,#220446,#220447); +#220445 = CARTESIAN_POINT('',(208.49165067984,-61.07310067984,1.585)); +#220446 = DIRECTION('',(0.,0.,-1.)); +#220447 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#220448 = ORIENTED_EDGE('',*,*,#220449,.T.); +#220449 = EDGE_CURVE('',#220441,#220450,#220452,.T.); +#220450 = VERTEX_POINT('',#220451); +#220451 = CARTESIAN_POINT('',(207.79165,-61.1331,1.585)); +#220452 = LINE('',#220453,#220454); +#220453 = CARTESIAN_POINT('',(208.49165,-61.1331,1.585)); +#220454 = VECTOR('',#220455,1.); +#220455 = DIRECTION('',(-1.,0.,0.)); +#220456 = ORIENTED_EDGE('',*,*,#220457,.T.); +#220457 = EDGE_CURVE('',#220450,#220458,#220460,.T.); +#220458 = VERTEX_POINT('',#220459); +#220459 = CARTESIAN_POINT('',(207.79165,-62.5131,1.585)); +#220460 = LINE('',#220461,#220462); +#220461 = CARTESIAN_POINT('',(207.79165,-61.1331,1.585)); +#220462 = VECTOR('',#220463,1.); +#220463 = DIRECTION('',(0.,-1.,0.)); +#220464 = ORIENTED_EDGE('',*,*,#220465,.T.); +#220465 = EDGE_CURVE('',#220458,#220466,#220468,.T.); +#220466 = VERTEX_POINT('',#220467); +#220467 = CARTESIAN_POINT('',(208.49165,-62.5131,1.585)); +#220468 = LINE('',#220469,#220470); +#220469 = CARTESIAN_POINT('',(207.79165,-62.5131,1.585)); +#220470 = VECTOR('',#220471,1.); +#220471 = DIRECTION('',(1.,0.,0.)); +#220472 = ORIENTED_EDGE('',*,*,#220473,.T.); +#220473 = EDGE_CURVE('',#220466,#220474,#220476,.T.); +#220474 = VERTEX_POINT('',#220475); +#220475 = CARTESIAN_POINT('',(208.55165,-62.5731,1.585)); +#220476 = CIRCLE('',#220477,5.999932016259E-02); +#220477 = AXIS2_PLACEMENT_3D('',#220478,#220479,#220480); +#220478 = CARTESIAN_POINT('',(208.49165067984,-62.57309932015,1.585)); +#220479 = DIRECTION('',(0.,0.,-1.)); +#220480 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#220481 = ORIENTED_EDGE('',*,*,#220482,.T.); +#220482 = EDGE_CURVE('',#220474,#220483,#220485,.T.); +#220483 = VERTEX_POINT('',#220484); +#220484 = CARTESIAN_POINT('',(208.55165,-64.3231,1.585)); +#220485 = LINE('',#220486,#220487); +#220486 = CARTESIAN_POINT('',(208.55165,-62.5731,1.585)); +#220487 = VECTOR('',#220488,1.); +#220488 = DIRECTION('',(0.,-1.,0.)); +#220489 = ORIENTED_EDGE('',*,*,#220490,.T.); +#220490 = EDGE_CURVE('',#220483,#220491,#220493,.T.); +#220491 = VERTEX_POINT('',#220492); +#220492 = CARTESIAN_POINT('',(209.93165,-64.3231,1.585)); +#220493 = LINE('',#220494,#220495); +#220494 = CARTESIAN_POINT('',(208.55165,-64.3231,1.585)); +#220495 = VECTOR('',#220496,1.); +#220496 = DIRECTION('',(1.,0.,0.)); +#220497 = ORIENTED_EDGE('',*,*,#220498,.T.); +#220498 = EDGE_CURVE('',#220491,#220499,#220501,.T.); +#220499 = VERTEX_POINT('',#220500); +#220500 = CARTESIAN_POINT('',(209.93165,-63.6231,1.585)); +#220501 = LINE('',#220502,#220503); +#220502 = CARTESIAN_POINT('',(209.93165,-64.3231,1.585)); +#220503 = VECTOR('',#220504,1.); +#220504 = DIRECTION('',(0.,1.,0.)); +#220505 = ORIENTED_EDGE('',*,*,#220506,.T.); +#220506 = EDGE_CURVE('',#220499,#220507,#220509,.T.); +#220507 = VERTEX_POINT('',#220508); +#220508 = CARTESIAN_POINT('',(209.99165,-63.5631,1.585)); +#220509 = CIRCLE('',#220510,5.999932016262E-02); +#220510 = AXIS2_PLACEMENT_3D('',#220511,#220512,#220513); +#220511 = CARTESIAN_POINT('',(209.99164932015,-63.62309932015,1.585)); +#220512 = DIRECTION('',(0.,0.,-1.)); +#220513 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#220514 = ORIENTED_EDGE('',*,*,#220515,.T.); +#220515 = EDGE_CURVE('',#220507,#220516,#220518,.T.); +#220516 = VERTEX_POINT('',#220517); +#220517 = CARTESIAN_POINT('',(212.88165,-63.5631,1.585)); +#220518 = LINE('',#220519,#220520); +#220519 = CARTESIAN_POINT('',(209.99165,-63.5631,1.585)); +#220520 = VECTOR('',#220521,1.); +#220521 = DIRECTION('',(1.,0.,0.)); +#220522 = ORIENTED_EDGE('',*,*,#220523,.T.); +#220523 = EDGE_CURVE('',#220516,#220524,#220526,.T.); +#220524 = VERTEX_POINT('',#220525); +#220525 = CARTESIAN_POINT('',(212.88165,-52.5831,1.585)); +#220526 = LINE('',#220527,#220528); +#220527 = CARTESIAN_POINT('',(212.88165,-63.5631,1.585)); +#220528 = VECTOR('',#220529,1.); +#220529 = DIRECTION('',(0.,1.,0.)); +#220530 = ORIENTED_EDGE('',*,*,#220531,.T.); +#220531 = EDGE_CURVE('',#220524,#220356,#220532,.T.); +#220532 = LINE('',#220533,#220534); +#220533 = CARTESIAN_POINT('',(212.88165,-52.5831,1.585)); +#220534 = VECTOR('',#220535,1.); +#220535 = DIRECTION('',(-1.,0.,0.)); +#220536 = FACE_BOUND('',#220537,.F.); +#220537 = EDGE_LOOP('',(#220538,#220548,#220556,#220564,#220572,#220581, + #220589,#220598,#220606,#220614)); +#220538 = ORIENTED_EDGE('',*,*,#220539,.T.); +#220539 = EDGE_CURVE('',#220540,#220542,#220544,.T.); +#220540 = VERTEX_POINT('',#220541); +#220541 = CARTESIAN_POINT('',(213.64165,-64.3231,1.585)); +#220542 = VERTEX_POINT('',#220543); +#220543 = CARTESIAN_POINT('',(213.64165,-51.8231,1.585)); +#220544 = LINE('',#220545,#220546); +#220545 = CARTESIAN_POINT('',(213.64165,-64.3231,1.585)); +#220546 = VECTOR('',#220547,1.); +#220547 = DIRECTION('',(0.,1.,0.)); +#220548 = ORIENTED_EDGE('',*,*,#220549,.T.); +#220549 = EDGE_CURVE('',#220542,#220550,#220552,.T.); +#220550 = VERTEX_POINT('',#220551); +#220551 = CARTESIAN_POINT('',(210.05165,-51.8231,1.585)); +#220552 = LINE('',#220553,#220554); +#220553 = CARTESIAN_POINT('',(213.64165,-51.8231,1.585)); +#220554 = VECTOR('',#220555,1.); +#220555 = DIRECTION('',(-1.,0.,0.)); +#220556 = ORIENTED_EDGE('',*,*,#220557,.T.); +#220557 = EDGE_CURVE('',#220550,#220558,#220560,.T.); +#220558 = VERTEX_POINT('',#220559); +#220559 = CARTESIAN_POINT('',(210.05165,-52.4631,1.585)); +#220560 = LINE('',#220561,#220562); +#220561 = CARTESIAN_POINT('',(210.05165,-51.8231,1.585)); +#220562 = VECTOR('',#220563,1.); +#220563 = DIRECTION('',(0.,-1.,0.)); +#220564 = ORIENTED_EDGE('',*,*,#220565,.T.); +#220565 = EDGE_CURVE('',#220558,#220566,#220568,.T.); +#220566 = VERTEX_POINT('',#220567); +#220567 = CARTESIAN_POINT('',(212.94165,-52.4631,1.585)); +#220568 = LINE('',#220569,#220570); +#220569 = CARTESIAN_POINT('',(210.05165,-52.4631,1.585)); +#220570 = VECTOR('',#220571,1.); +#220571 = DIRECTION('',(1.,0.,0.)); +#220572 = ORIENTED_EDGE('',*,*,#220573,.T.); +#220573 = EDGE_CURVE('',#220566,#220574,#220576,.T.); +#220574 = VERTEX_POINT('',#220575); +#220575 = CARTESIAN_POINT('',(213.00165,-52.5231,1.585)); +#220576 = CIRCLE('',#220577,5.999932016265E-02); +#220577 = AXIS2_PLACEMENT_3D('',#220578,#220579,#220580); +#220578 = CARTESIAN_POINT('',(212.94165067984,-52.52309932015,1.585)); +#220579 = DIRECTION('',(0.,0.,-1.)); +#220580 = DIRECTION('',(-1.133081517401E-05,0.999999999936,0.)); +#220581 = ORIENTED_EDGE('',*,*,#220582,.T.); +#220582 = EDGE_CURVE('',#220574,#220583,#220585,.T.); +#220583 = VERTEX_POINT('',#220584); +#220584 = CARTESIAN_POINT('',(213.00165,-63.6231,1.585)); +#220585 = LINE('',#220586,#220587); +#220586 = CARTESIAN_POINT('',(213.00165,-52.5231,1.585)); +#220587 = VECTOR('',#220588,1.); +#220588 = DIRECTION('',(0.,-1.,0.)); +#220589 = ORIENTED_EDGE('',*,*,#220590,.T.); +#220590 = EDGE_CURVE('',#220583,#220591,#220593,.T.); +#220591 = VERTEX_POINT('',#220592); +#220592 = CARTESIAN_POINT('',(212.94165,-63.6831,1.585)); +#220593 = CIRCLE('',#220594,5.999932016262E-02); +#220594 = AXIS2_PLACEMENT_3D('',#220595,#220596,#220597); +#220595 = CARTESIAN_POINT('',(212.94165067984,-63.62310067984,1.585)); +#220596 = DIRECTION('',(0.,0.,-1.)); +#220597 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#220598 = ORIENTED_EDGE('',*,*,#220599,.T.); +#220599 = EDGE_CURVE('',#220591,#220600,#220602,.T.); +#220600 = VERTEX_POINT('',#220601); +#220601 = CARTESIAN_POINT('',(210.05165,-63.6831,1.585)); +#220602 = LINE('',#220603,#220604); +#220603 = CARTESIAN_POINT('',(212.94165,-63.6831,1.585)); +#220604 = VECTOR('',#220605,1.); +#220605 = DIRECTION('',(-1.,0.,0.)); +#220606 = ORIENTED_EDGE('',*,*,#220607,.T.); +#220607 = EDGE_CURVE('',#220600,#220608,#220610,.T.); +#220608 = VERTEX_POINT('',#220609); +#220609 = CARTESIAN_POINT('',(210.05165,-64.3231,1.585)); +#220610 = LINE('',#220611,#220612); +#220611 = CARTESIAN_POINT('',(210.05165,-63.6831,1.585)); +#220612 = VECTOR('',#220613,1.); +#220613 = DIRECTION('',(0.,-1.,0.)); +#220614 = ORIENTED_EDGE('',*,*,#220615,.T.); +#220615 = EDGE_CURVE('',#220608,#220540,#220616,.T.); +#220616 = LINE('',#220617,#220618); +#220617 = CARTESIAN_POINT('',(210.05165,-64.3231,1.585)); +#220618 = VECTOR('',#220619,1.); +#220619 = DIRECTION('',(1.,0.,0.)); +#220620 = FACE_BOUND('',#220621,.F.); +#220621 = EDGE_LOOP('',(#220622,#220632,#220640,#220648)); +#220622 = ORIENTED_EDGE('',*,*,#220623,.T.); +#220623 = EDGE_CURVE('',#220624,#220626,#220628,.T.); +#220624 = VERTEX_POINT('',#220625); +#220625 = CARTESIAN_POINT('',(208.43165,-64.3131,1.585)); +#220626 = VERTEX_POINT('',#220627); +#220627 = CARTESIAN_POINT('',(208.43165,-62.6331,1.585)); +#220628 = LINE('',#220629,#220630); +#220629 = CARTESIAN_POINT('',(208.43165,-64.3131,1.585)); +#220630 = VECTOR('',#220631,1.); +#220631 = DIRECTION('',(0.,1.,0.)); +#220632 = ORIENTED_EDGE('',*,*,#220633,.T.); +#220633 = EDGE_CURVE('',#220626,#220634,#220636,.T.); +#220634 = VERTEX_POINT('',#220635); +#220635 = CARTESIAN_POINT('',(207.80165,-62.6331,1.585)); +#220636 = LINE('',#220637,#220638); +#220637 = CARTESIAN_POINT('',(208.43165,-62.6331,1.585)); +#220638 = VECTOR('',#220639,1.); +#220639 = DIRECTION('',(-1.,0.,0.)); +#220640 = ORIENTED_EDGE('',*,*,#220641,.T.); +#220641 = EDGE_CURVE('',#220634,#220642,#220644,.T.); +#220642 = VERTEX_POINT('',#220643); +#220643 = CARTESIAN_POINT('',(207.80165,-64.3131,1.585)); +#220644 = LINE('',#220645,#220646); +#220645 = CARTESIAN_POINT('',(207.80165,-62.6331,1.585)); +#220646 = VECTOR('',#220647,1.); +#220647 = DIRECTION('',(0.,-1.,0.)); +#220648 = ORIENTED_EDGE('',*,*,#220649,.T.); +#220649 = EDGE_CURVE('',#220642,#220624,#220650,.T.); +#220650 = LINE('',#220651,#220652); +#220651 = CARTESIAN_POINT('',(207.80165,-64.3131,1.585)); +#220652 = VECTOR('',#220653,1.); +#220653 = DIRECTION('',(1.,0.,0.)); +#220654 = FACE_BOUND('',#220655,.F.); +#220655 = EDGE_LOOP('',(#220656,#220666,#220674,#220682)); +#220656 = ORIENTED_EDGE('',*,*,#220657,.T.); +#220657 = EDGE_CURVE('',#220658,#220660,#220662,.T.); +#220658 = VERTEX_POINT('',#220659); +#220659 = CARTESIAN_POINT('',(208.43165,-61.0131,1.585)); +#220660 = VERTEX_POINT('',#220661); +#220661 = CARTESIAN_POINT('',(208.43165,-55.1331,1.585)); +#220662 = LINE('',#220663,#220664); +#220663 = CARTESIAN_POINT('',(208.43165,-61.0131,1.585)); +#220664 = VECTOR('',#220665,1.); +#220665 = DIRECTION('',(0.,1.,0.)); +#220666 = ORIENTED_EDGE('',*,*,#220667,.T.); +#220667 = EDGE_CURVE('',#220660,#220668,#220670,.T.); +#220668 = VERTEX_POINT('',#220669); +#220669 = CARTESIAN_POINT('',(207.80165,-55.1331,1.585)); +#220670 = LINE('',#220671,#220672); +#220671 = CARTESIAN_POINT('',(208.43165,-55.1331,1.585)); +#220672 = VECTOR('',#220673,1.); +#220673 = DIRECTION('',(-1.,0.,0.)); +#220674 = ORIENTED_EDGE('',*,*,#220675,.T.); +#220675 = EDGE_CURVE('',#220668,#220676,#220678,.T.); +#220676 = VERTEX_POINT('',#220677); +#220677 = CARTESIAN_POINT('',(207.80165,-61.0131,1.585)); +#220678 = LINE('',#220679,#220680); +#220679 = CARTESIAN_POINT('',(207.80165,-55.1331,1.585)); +#220680 = VECTOR('',#220681,1.); +#220681 = DIRECTION('',(0.,-1.,0.)); +#220682 = ORIENTED_EDGE('',*,*,#220683,.T.); +#220683 = EDGE_CURVE('',#220676,#220658,#220684,.T.); +#220684 = LINE('',#220685,#220686); +#220685 = CARTESIAN_POINT('',(207.80165,-61.0131,1.585)); +#220686 = VECTOR('',#220687,1.); +#220687 = DIRECTION('',(1.,0.,0.)); +#220688 = FACE_BOUND('',#220689,.F.); +#220689 = EDGE_LOOP('',(#220690,#220700,#220708,#220716)); +#220690 = ORIENTED_EDGE('',*,*,#220691,.T.); +#220691 = EDGE_CURVE('',#220692,#220694,#220696,.T.); +#220692 = VERTEX_POINT('',#220693); +#220693 = CARTESIAN_POINT('',(208.43165,-53.5131,1.585)); +#220694 = VERTEX_POINT('',#220695); +#220695 = CARTESIAN_POINT('',(208.43165,-51.8331,1.585)); +#220696 = LINE('',#220697,#220698); +#220697 = CARTESIAN_POINT('',(208.43165,-53.5131,1.585)); +#220698 = VECTOR('',#220699,1.); +#220699 = DIRECTION('',(0.,1.,0.)); +#220700 = ORIENTED_EDGE('',*,*,#220701,.T.); +#220701 = EDGE_CURVE('',#220694,#220702,#220704,.T.); +#220702 = VERTEX_POINT('',#220703); +#220703 = CARTESIAN_POINT('',(207.80165,-51.8331,1.585)); +#220704 = LINE('',#220705,#220706); +#220705 = CARTESIAN_POINT('',(208.43165,-51.8331,1.585)); +#220706 = VECTOR('',#220707,1.); +#220707 = DIRECTION('',(-1.,0.,0.)); +#220708 = ORIENTED_EDGE('',*,*,#220709,.T.); +#220709 = EDGE_CURVE('',#220702,#220710,#220712,.T.); +#220710 = VERTEX_POINT('',#220711); +#220711 = CARTESIAN_POINT('',(207.80165,-53.5131,1.585)); +#220712 = LINE('',#220713,#220714); +#220713 = CARTESIAN_POINT('',(207.80165,-51.8331,1.585)); +#220714 = VECTOR('',#220715,1.); +#220715 = DIRECTION('',(0.,-1.,0.)); +#220716 = ORIENTED_EDGE('',*,*,#220717,.T.); +#220717 = EDGE_CURVE('',#220710,#220692,#220718,.T.); +#220718 = LINE('',#220719,#220720); +#220719 = CARTESIAN_POINT('',(207.80165,-53.5131,1.585)); +#220720 = VECTOR('',#220721,1.); +#220721 = DIRECTION('',(1.,0.,0.)); +#220722 = PLANE('',#220723); +#220723 = AXIS2_PLACEMENT_3D('',#220724,#220725,#220726); +#220724 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220725 = DIRECTION('',(0.,0.,1.)); +#220726 = DIRECTION('',(1.,0.,-0.)); +#220727 = SHELL_BASED_SURFACE_MODEL('',(#220728)); +#220728 = OPEN_SHELL('',(#220729)); +#220729 = ADVANCED_FACE('',(#220730),#220766,.T.); +#220730 = FACE_BOUND('',#220731,.F.); +#220731 = EDGE_LOOP('',(#220732,#220743,#220751,#220760)); +#220732 = ORIENTED_EDGE('',*,*,#220733,.T.); +#220733 = EDGE_CURVE('',#220734,#220736,#220738,.T.); +#220734 = VERTEX_POINT('',#220735); +#220735 = CARTESIAN_POINT('',(177.954392,-64.3606,1.585)); +#220736 = VERTEX_POINT('',#220737); +#220737 = CARTESIAN_POINT('',(177.954392,-64.2406,1.585)); +#220738 = CIRCLE('',#220739,6.000000000042E-02); +#220739 = AXIS2_PLACEMENT_3D('',#220740,#220741,#220742); +#220740 = CARTESIAN_POINT('',(177.95439177441,-64.3006,1.585)); +#220741 = DIRECTION('',(0.,0.,-1.)); +#220742 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#220743 = ORIENTED_EDGE('',*,*,#220744,.T.); +#220744 = EDGE_CURVE('',#220736,#220745,#220747,.T.); +#220745 = VERTEX_POINT('',#220746); +#220746 = CARTESIAN_POINT('',(178.428908,-64.2406,1.585)); +#220747 = LINE('',#220748,#220749); +#220748 = CARTESIAN_POINT('',(177.954392,-64.2406,1.585)); +#220749 = VECTOR('',#220750,1.); +#220750 = DIRECTION('',(1.,0.,0.)); +#220751 = ORIENTED_EDGE('',*,*,#220752,.T.); +#220752 = EDGE_CURVE('',#220745,#220753,#220755,.T.); +#220753 = VERTEX_POINT('',#220754); +#220754 = CARTESIAN_POINT('',(178.428908,-64.3606,1.585)); +#220755 = CIRCLE('',#220756,6.000000000042E-02); +#220756 = AXIS2_PLACEMENT_3D('',#220757,#220758,#220759); +#220757 = CARTESIAN_POINT('',(178.42890822558,-64.3006,1.585)); +#220758 = DIRECTION('',(0.,0.,-1.)); +#220759 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#220760 = ORIENTED_EDGE('',*,*,#220761,.T.); +#220761 = EDGE_CURVE('',#220753,#220734,#220762,.T.); +#220762 = LINE('',#220763,#220764); +#220763 = CARTESIAN_POINT('',(178.428908,-64.3606,1.585)); +#220764 = VECTOR('',#220765,1.); +#220765 = DIRECTION('',(-1.,0.,0.)); +#220766 = PLANE('',#220767); +#220767 = AXIS2_PLACEMENT_3D('',#220768,#220769,#220770); +#220768 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220769 = DIRECTION('',(0.,0.,1.)); +#220770 = DIRECTION('',(1.,0.,-0.)); +#220771 = SHELL_BASED_SURFACE_MODEL('',(#220772)); +#220772 = OPEN_SHELL('',(#220773)); +#220773 = ADVANCED_FACE('',(#220774,#220890),#220973,.T.); +#220774 = FACE_BOUND('',#220775,.F.); +#220775 = EDGE_LOOP('',(#220776,#220787,#220795,#220803,#220811,#220819, + #220827,#220835,#220843,#220851,#220859,#220867,#220875,#220884)); +#220776 = ORIENTED_EDGE('',*,*,#220777,.T.); +#220777 = EDGE_CURVE('',#220778,#220780,#220782,.T.); +#220778 = VERTEX_POINT('',#220779); +#220779 = CARTESIAN_POINT('',(198.879996,-63.263287,1.585)); +#220780 = VERTEX_POINT('',#220781); +#220781 = CARTESIAN_POINT('',(198.953555,-63.202919,1.585)); +#220782 = CIRCLE('',#220783,7.500074938986E-02); +#220783 = AXIS2_PLACEMENT_3D('',#220784,#220785,#220786); +#220784 = CARTESIAN_POINT('',(198.95355546611,-63.27791974938,1.585)); +#220785 = DIRECTION('',(0.,0.,-1.)); +#220786 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#220787 = ORIENTED_EDGE('',*,*,#220788,.T.); +#220788 = EDGE_CURVE('',#220780,#220789,#220791,.T.); +#220789 = VERTEX_POINT('',#220790); +#220790 = CARTESIAN_POINT('',(199.199055,-63.203648,1.585)); +#220791 = LINE('',#220792,#220793); +#220792 = CARTESIAN_POINT('',(198.953555,-63.202919,1.585)); +#220793 = VECTOR('',#220794,1.); +#220794 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#220795 = ORIENTED_EDGE('',*,*,#220796,.T.); +#220796 = EDGE_CURVE('',#220789,#220797,#220799,.T.); +#220797 = VERTEX_POINT('',#220798); +#220798 = CARTESIAN_POINT('',(199.376175,-63.263178,1.585)); +#220799 = LINE('',#220800,#220801); +#220800 = CARTESIAN_POINT('',(199.199055,-63.203648,1.585)); +#220801 = VECTOR('',#220802,1.); +#220802 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#220803 = ORIENTED_EDGE('',*,*,#220804,.T.); +#220804 = EDGE_CURVE('',#220797,#220805,#220807,.T.); +#220805 = VERTEX_POINT('',#220806); +#220806 = CARTESIAN_POINT('',(199.492864,-63.38094,1.585)); +#220807 = LINE('',#220808,#220809); +#220808 = CARTESIAN_POINT('',(199.376175,-63.263178,1.585)); +#220809 = VECTOR('',#220810,1.); +#220810 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#220811 = ORIENTED_EDGE('',*,*,#220812,.T.); +#220812 = EDGE_CURVE('',#220805,#220813,#220815,.T.); +#220813 = VERTEX_POINT('',#220814); +#220814 = CARTESIAN_POINT('',(199.550125,-63.497824,1.585)); +#220815 = LINE('',#220816,#220817); +#220816 = CARTESIAN_POINT('',(199.492864,-63.38094,1.585)); +#220817 = VECTOR('',#220818,1.); +#220818 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#220819 = ORIENTED_EDGE('',*,*,#220820,.T.); +#220820 = EDGE_CURVE('',#220813,#220821,#220823,.T.); +#220821 = VERTEX_POINT('',#220822); +#220822 = CARTESIAN_POINT('',(199.599983,-63.70649,1.585)); +#220823 = LINE('',#220824,#220825); +#220824 = CARTESIAN_POINT('',(199.550125,-63.497824,1.585)); +#220825 = VECTOR('',#220826,1.); +#220826 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#220827 = ORIENTED_EDGE('',*,*,#220828,.T.); +#220828 = EDGE_CURVE('',#220821,#220829,#220831,.T.); +#220829 = VERTEX_POINT('',#220830); +#220830 = CARTESIAN_POINT('',(199.597744,-63.867537,1.585)); +#220831 = LINE('',#220832,#220833); +#220832 = CARTESIAN_POINT('',(199.599983,-63.70649,1.585)); +#220833 = VECTOR('',#220834,1.); +#220834 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#220835 = ORIENTED_EDGE('',*,*,#220836,.T.); +#220836 = EDGE_CURVE('',#220829,#220837,#220839,.T.); +#220837 = VERTEX_POINT('',#220838); +#220838 = CARTESIAN_POINT('',(199.544446,-64.073364,1.585)); +#220839 = LINE('',#220840,#220841); +#220840 = CARTESIAN_POINT('',(199.597744,-63.867537,1.585)); +#220841 = VECTOR('',#220842,1.); +#220842 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#220843 = ORIENTED_EDGE('',*,*,#220844,.T.); +#220844 = EDGE_CURVE('',#220837,#220845,#220847,.T.); +#220845 = VERTEX_POINT('',#220846); +#220846 = CARTESIAN_POINT('',(199.487496,-64.182344,1.585)); +#220847 = LINE('',#220848,#220849); +#220848 = CARTESIAN_POINT('',(199.544446,-64.073364,1.585)); +#220849 = VECTOR('',#220850,1.); +#220850 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#220851 = ORIENTED_EDGE('',*,*,#220852,.T.); +#220852 = EDGE_CURVE('',#220845,#220853,#220855,.T.); +#220853 = VERTEX_POINT('',#220854); +#220854 = CARTESIAN_POINT('',(199.371649,-64.295457,1.585)); +#220855 = LINE('',#220856,#220857); +#220856 = CARTESIAN_POINT('',(199.487496,-64.182344,1.585)); +#220857 = VECTOR('',#220858,1.); +#220858 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#220859 = ORIENTED_EDGE('',*,*,#220860,.T.); +#220860 = EDGE_CURVE('',#220853,#220861,#220863,.T.); +#220861 = VERTEX_POINT('',#220862); +#220862 = CARTESIAN_POINT('',(199.199055,-64.352189,1.585)); +#220863 = LINE('',#220864,#220865); +#220864 = CARTESIAN_POINT('',(199.371649,-64.295457,1.585)); +#220865 = VECTOR('',#220866,1.); +#220866 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#220867 = ORIENTED_EDGE('',*,*,#220868,.T.); +#220868 = EDGE_CURVE('',#220861,#220869,#220871,.T.); +#220869 = VERTEX_POINT('',#220870); +#220870 = CARTESIAN_POINT('',(198.938923,-64.351478,1.585)); +#220871 = LINE('',#220872,#220873); +#220872 = CARTESIAN_POINT('',(199.199055,-64.352189,1.585)); +#220873 = VECTOR('',#220874,1.); +#220874 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#220875 = ORIENTED_EDGE('',*,*,#220876,.T.); +#220876 = EDGE_CURVE('',#220869,#220877,#220879,.T.); +#220877 = VERTEX_POINT('',#220878); +#220878 = CARTESIAN_POINT('',(198.878555,-64.277919,1.585)); +#220879 = CIRCLE('',#220880,7.500074938991E-02); +#220880 = AXIS2_PLACEMENT_3D('',#220881,#220882,#220883); +#220881 = CARTESIAN_POINT('',(198.95355574938,-64.27791853389,1.585)); +#220882 = DIRECTION('',(0.,0.,-1.)); +#220883 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#220884 = ORIENTED_EDGE('',*,*,#220885,.T.); +#220885 = EDGE_CURVE('',#220877,#220778,#220886,.T.); +#220886 = LINE('',#220887,#220888); +#220887 = CARTESIAN_POINT('',(198.878555,-64.277919,1.585)); +#220888 = VECTOR('',#220889,1.); +#220889 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#220890 = FACE_BOUND('',#220891,.F.); +#220891 = EDGE_LOOP('',(#220892,#220902,#220910,#220918,#220926,#220934, + #220942,#220951,#220959,#220967)); +#220892 = ORIENTED_EDGE('',*,*,#220893,.T.); +#220893 = EDGE_CURVE('',#220894,#220896,#220898,.T.); +#220894 = VERTEX_POINT('',#220895); +#220895 = CARTESIAN_POINT('',(199.293993,-63.39109,1.585)); +#220896 = VERTEX_POINT('',#220897); +#220897 = CARTESIAN_POINT('',(199.17948,-63.352919,1.585)); +#220898 = LINE('',#220899,#220900); +#220899 = CARTESIAN_POINT('',(199.293993,-63.39109,1.585)); +#220900 = VECTOR('',#220901,1.); +#220901 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#220902 = ORIENTED_EDGE('',*,*,#220903,.T.); +#220903 = EDGE_CURVE('',#220896,#220904,#220906,.T.); +#220904 = VERTEX_POINT('',#220905); +#220905 = CARTESIAN_POINT('',(199.028555,-63.352919,1.585)); +#220906 = LINE('',#220907,#220908); +#220907 = CARTESIAN_POINT('',(199.17948,-63.352919,1.585)); +#220908 = VECTOR('',#220909,1.); +#220909 = DIRECTION('',(-1.,0.,0.)); +#220910 = ORIENTED_EDGE('',*,*,#220911,.T.); +#220911 = EDGE_CURVE('',#220904,#220912,#220914,.T.); +#220912 = VERTEX_POINT('',#220913); +#220913 = CARTESIAN_POINT('',(199.028555,-64.202919,1.585)); +#220914 = LINE('',#220915,#220916); +#220915 = CARTESIAN_POINT('',(199.028555,-63.352919,1.585)); +#220916 = VECTOR('',#220917,1.); +#220917 = DIRECTION('',(0.,-1.,0.)); +#220918 = ORIENTED_EDGE('',*,*,#220919,.T.); +#220919 = EDGE_CURVE('',#220912,#220920,#220922,.T.); +#220920 = VERTEX_POINT('',#220921); +#220921 = CARTESIAN_POINT('',(199.17948,-64.202919,1.585)); +#220922 = LINE('',#220923,#220924); +#220923 = CARTESIAN_POINT('',(199.028555,-64.202919,1.585)); +#220924 = VECTOR('',#220925,1.); +#220925 = DIRECTION('',(1.,0.,0.)); +#220926 = ORIENTED_EDGE('',*,*,#220927,.T.); +#220927 = EDGE_CURVE('',#220920,#220928,#220930,.T.); +#220928 = VERTEX_POINT('',#220929); +#220929 = CARTESIAN_POINT('',(199.293993,-64.164747,1.585)); +#220930 = LINE('',#220931,#220932); +#220931 = CARTESIAN_POINT('',(199.17948,-64.202919,1.585)); +#220932 = VECTOR('',#220933,1.); +#220933 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#220934 = ORIENTED_EDGE('',*,*,#220935,.T.); +#220935 = EDGE_CURVE('',#220928,#220936,#220938,.T.); +#220936 = VERTEX_POINT('',#220937); +#220937 = CARTESIAN_POINT('',(199.368105,-64.090634,1.585)); +#220938 = LINE('',#220939,#220940); +#220939 = CARTESIAN_POINT('',(199.293993,-64.164747,1.585)); +#220940 = VECTOR('',#220941,1.); +#220941 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#220942 = ORIENTED_EDGE('',*,*,#220943,.T.); +#220943 = EDGE_CURVE('',#220936,#220944,#220946,.T.); +#220944 = VERTEX_POINT('',#220945); +#220945 = CARTESIAN_POINT('',(199.449983,-63.715724,1.585)); +#220946 = CIRCLE('',#220947,0.611719141131); +#220947 = AXIS2_PLACEMENT_3D('',#220948,#220949,#220950); +#220948 = CARTESIAN_POINT('',(198.84157096224,-63.77924643649,1.585)); +#220949 = DIRECTION('',(0.,0.,1.)); +#220950 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#220951 = ORIENTED_EDGE('',*,*,#220952,.T.); +#220952 = EDGE_CURVE('',#220944,#220953,#220955,.T.); +#220953 = VERTEX_POINT('',#220954); +#220954 = CARTESIAN_POINT('',(199.406599,-63.54219,1.585)); +#220955 = LINE('',#220956,#220957); +#220956 = CARTESIAN_POINT('',(199.449983,-63.715724,1.585)); +#220957 = VECTOR('',#220958,1.); +#220958 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#220959 = ORIENTED_EDGE('',*,*,#220960,.T.); +#220960 = EDGE_CURVE('',#220953,#220961,#220963,.T.); +#220961 = VERTEX_POINT('',#220962); +#220962 = CARTESIAN_POINT('',(199.368106,-63.465203,1.585)); +#220963 = LINE('',#220964,#220965); +#220964 = CARTESIAN_POINT('',(199.406599,-63.54219,1.585)); +#220965 = VECTOR('',#220966,1.); +#220966 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#220967 = ORIENTED_EDGE('',*,*,#220968,.T.); +#220968 = EDGE_CURVE('',#220961,#220894,#220969,.T.); +#220969 = LINE('',#220970,#220971); +#220970 = CARTESIAN_POINT('',(199.368106,-63.465203,1.585)); +#220971 = VECTOR('',#220972,1.); +#220972 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220973 = PLANE('',#220974); +#220974 = AXIS2_PLACEMENT_3D('',#220975,#220976,#220977); +#220975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220976 = DIRECTION('',(0.,0.,1.)); +#220977 = DIRECTION('',(1.,0.,-0.)); +#220978 = SHELL_BASED_SURFACE_MODEL('',(#220979)); +#220979 = OPEN_SHELL('',(#220980)); +#220980 = ADVANCED_FACE('',(#220981,#221124),#221194,.T.); +#220981 = FACE_BOUND('',#220982,.F.); +#220982 = EDGE_LOOP('',(#220983,#220994,#221002,#221010,#221019,#221027, + #221035,#221043,#221051,#221059,#221067,#221075,#221084,#221092, + #221101,#221109,#221118)); +#220983 = ORIENTED_EDGE('',*,*,#220984,.T.); +#220984 = EDGE_CURVE('',#220985,#220987,#220989,.T.); +#220985 = VERTEX_POINT('',#220986); +#220986 = CARTESIAN_POINT('',(199.833175,-63.6883,1.585)); +#220987 = VERTEX_POINT('',#220988); +#220988 = CARTESIAN_POINT('',(200.062871,-63.258456,1.585)); +#220989 = CIRCLE('',#220990,0.610092147705); +#220990 = AXIS2_PLACEMENT_3D('',#220991,#220992,#220993); +#220991 = CARTESIAN_POINT('',(200.44132174024,-63.73698234817,1.585)); +#220992 = DIRECTION('',(0.,0.,-1.)); +#220993 = DIRECTION('',(-0.99681128913,7.979507417357E-02,0.)); +#220994 = ORIENTED_EDGE('',*,*,#220995,.T.); +#220995 = EDGE_CURVE('',#220987,#220996,#220998,.T.); +#220996 = VERTEX_POINT('',#220997); +#220997 = CARTESIAN_POINT('',(200.177018,-63.20436,1.585)); +#220998 = LINE('',#220999,#221000); +#220999 = CARTESIAN_POINT('',(200.062871,-63.258456,1.585)); +#221000 = VECTOR('',#221001,1.); +#221001 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#221002 = ORIENTED_EDGE('',*,*,#221003,.T.); +#221003 = EDGE_CURVE('',#220996,#221004,#221006,.T.); +#221004 = VERTEX_POINT('',#221005); +#221005 = CARTESIAN_POINT('',(200.396758,-63.20436,1.585)); +#221006 = LINE('',#221007,#221008); +#221007 = CARTESIAN_POINT('',(200.177018,-63.20436,1.585)); +#221008 = VECTOR('',#221009,1.); +#221009 = DIRECTION('',(1.,0.,0.)); +#221010 = ORIENTED_EDGE('',*,*,#221011,.T.); +#221011 = EDGE_CURVE('',#221004,#221012,#221014,.T.); +#221012 = VERTEX_POINT('',#221013); +#221013 = CARTESIAN_POINT('',(200.382126,-63.352919,1.585)); +#221014 = CIRCLE('',#221015,7.500006711464E-02); +#221015 = AXIS2_PLACEMENT_3D('',#221016,#221017,#221018); +#221016 = CARTESIAN_POINT('',(200.38212606711,-63.27791893288,1.585)); +#221017 = DIRECTION('',(0.,0.,-1.)); +#221018 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#221019 = ORIENTED_EDGE('',*,*,#221020,.T.); +#221020 = EDGE_CURVE('',#221012,#221021,#221023,.T.); +#221021 = VERTEX_POINT('',#221022); +#221022 = CARTESIAN_POINT('',(200.209355,-63.352919,1.585)); +#221023 = LINE('',#221024,#221025); +#221024 = CARTESIAN_POINT('',(200.382126,-63.352919,1.585)); +#221025 = VECTOR('',#221026,1.); +#221026 = DIRECTION('',(-1.,0.,0.)); +#221027 = ORIENTED_EDGE('',*,*,#221028,.T.); +#221028 = EDGE_CURVE('',#221021,#221029,#221031,.T.); +#221029 = VERTEX_POINT('',#221030); +#221030 = CARTESIAN_POINT('',(200.140839,-63.387177,1.585)); +#221031 = LINE('',#221032,#221033); +#221032 = CARTESIAN_POINT('',(200.209355,-63.352919,1.585)); +#221033 = VECTOR('',#221034,1.); +#221034 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#221035 = ORIENTED_EDGE('',*,*,#221036,.T.); +#221036 = EDGE_CURVE('',#221029,#221037,#221039,.T.); +#221037 = VERTEX_POINT('',#221038); +#221038 = CARTESIAN_POINT('',(200.107077,-63.420938,1.585)); +#221039 = LINE('',#221040,#221041); +#221040 = CARTESIAN_POINT('',(200.140839,-63.387177,1.585)); +#221041 = VECTOR('',#221042,1.); +#221042 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#221043 = ORIENTED_EDGE('',*,*,#221044,.T.); +#221044 = EDGE_CURVE('',#221037,#221045,#221047,.T.); +#221045 = VERTEX_POINT('',#221046); +#221046 = CARTESIAN_POINT('',(200.023165,-63.546807,1.585)); +#221047 = LINE('',#221048,#221049); +#221048 = CARTESIAN_POINT('',(200.107077,-63.420938,1.585)); +#221049 = VECTOR('',#221050,1.); +#221050 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#221051 = ORIENTED_EDGE('',*,*,#221052,.T.); +#221052 = EDGE_CURVE('',#221045,#221053,#221055,.T.); +#221053 = VERTEX_POINT('',#221054); +#221054 = CARTESIAN_POINT('',(200.004641,-63.620904,1.585)); +#221055 = LINE('',#221056,#221057); +#221056 = CARTESIAN_POINT('',(200.023165,-63.546807,1.585)); +#221057 = VECTOR('',#221058,1.); +#221058 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#221059 = ORIENTED_EDGE('',*,*,#221060,.T.); +#221060 = EDGE_CURVE('',#221053,#221061,#221063,.T.); +#221061 = VERTEX_POINT('',#221062); +#221062 = CARTESIAN_POINT('',(200.08178,-63.585312,1.585)); +#221063 = LINE('',#221064,#221065); +#221064 = CARTESIAN_POINT('',(200.004641,-63.620904,1.585)); +#221065 = VECTOR('',#221066,1.); +#221066 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#221067 = ORIENTED_EDGE('',*,*,#221068,.T.); +#221068 = EDGE_CURVE('',#221061,#221069,#221071,.T.); +#221069 = VERTEX_POINT('',#221070); +#221070 = CARTESIAN_POINT('',(200.306697,-63.586534,1.585)); +#221071 = LINE('',#221072,#221073); +#221072 = CARTESIAN_POINT('',(200.08178,-63.585312,1.585)); +#221073 = VECTOR('',#221074,1.); +#221074 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#221075 = ORIENTED_EDGE('',*,*,#221076,.T.); +#221076 = EDGE_CURVE('',#221069,#221077,#221079,.T.); +#221077 = VERTEX_POINT('',#221078); +#221078 = CARTESIAN_POINT('',(200.550923,-63.834715,1.585)); +#221079 = CIRCLE('',#221080,0.348625649748); +#221080 = AXIS2_PLACEMENT_3D('',#221081,#221082,#221083); +#221081 = CARTESIAN_POINT('',(200.21352504586,-63.92247868387,1.585)); +#221082 = DIRECTION('',(0.,0.,-1.)); +#221083 = DIRECTION('',(0.267255017532,0.96362583797,0.)); +#221084 = ORIENTED_EDGE('',*,*,#221085,.T.); +#221085 = EDGE_CURVE('',#221077,#221086,#221088,.T.); +#221086 = VERTEX_POINT('',#221087); +#221087 = CARTESIAN_POINT('',(200.549701,-64.107252,1.585)); +#221088 = LINE('',#221089,#221090); +#221089 = CARTESIAN_POINT('',(200.550923,-63.834715,1.585)); +#221090 = VECTOR('',#221091,1.); +#221091 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#221092 = ORIENTED_EDGE('',*,*,#221093,.T.); +#221093 = EDGE_CURVE('',#221086,#221094,#221096,.T.); +#221094 = VERTEX_POINT('',#221095); +#221095 = CARTESIAN_POINT('',(200.30152,-64.351478,1.585)); +#221096 = CIRCLE('',#221097,0.348635327447); +#221097 = AXIS2_PLACEMENT_3D('',#221098,#221099,#221100); +#221098 = CARTESIAN_POINT('',(200.21374848129,-64.01407208415,1.585)); +#221099 = DIRECTION('',(0.,0.,-1.)); +#221100 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#221101 = ORIENTED_EDGE('',*,*,#221102,.T.); +#221102 = EDGE_CURVE('',#221094,#221103,#221105,.T.); +#221103 = VERTEX_POINT('',#221104); +#221104 = CARTESIAN_POINT('',(200.076602,-64.350256,1.585)); +#221105 = LINE('',#221106,#221107); +#221106 = CARTESIAN_POINT('',(200.30152,-64.351478,1.585)); +#221107 = VECTOR('',#221108,1.); +#221108 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#221109 = ORIENTED_EDGE('',*,*,#221110,.T.); +#221110 = EDGE_CURVE('',#221103,#221111,#221113,.T.); +#221111 = VERTEX_POINT('',#221112); +#221112 = CARTESIAN_POINT('',(199.832377,-64.102074,1.585)); +#221113 = CIRCLE('',#221114,0.348628446662); +#221114 = AXIS2_PLACEMENT_3D('',#221115,#221116,#221117); +#221115 = CARTESIAN_POINT('',(200.16977761322,-64.01430942847,1.585)); +#221116 = DIRECTION('',(0.,0.,-1.)); +#221117 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#221118 = ORIENTED_EDGE('',*,*,#221119,.T.); +#221119 = EDGE_CURVE('',#221111,#220985,#221120,.T.); +#221120 = LINE('',#221121,#221122); +#221121 = CARTESIAN_POINT('',(199.832377,-64.102074,1.585)); +#221122 = VECTOR('',#221123,1.); +#221123 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#221124 = FACE_BOUND('',#221125,.F.); +#221125 = EDGE_LOOP('',(#221126,#221137,#221145,#221154,#221162,#221171, + #221179,#221188)); +#221126 = ORIENTED_EDGE('',*,*,#221127,.T.); +#221127 = EDGE_CURVE('',#221128,#221130,#221132,.T.); +#221128 = VERTEX_POINT('',#221129); +#221129 = CARTESIAN_POINT('',(200.337699,-63.768129,1.585)); +#221130 = VERTEX_POINT('',#221131); +#221131 = CARTESIAN_POINT('',(200.045601,-63.768129,1.585)); +#221132 = CIRCLE('',#221133,0.252889603602); +#221133 = AXIS2_PLACEMENT_3D('',#221134,#221135,#221136); +#221134 = CARTESIAN_POINT('',(200.19165,-63.974582,1.585)); +#221135 = DIRECTION('',(0.,0.,1.)); +#221136 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#221137 = ORIENTED_EDGE('',*,*,#221138,.T.); +#221138 = EDGE_CURVE('',#221130,#221139,#221141,.T.); +#221139 = VERTEX_POINT('',#221140); +#221140 = CARTESIAN_POINT('',(200.015194,-63.798536,1.585)); +#221141 = LINE('',#221142,#221143); +#221142 = CARTESIAN_POINT('',(200.045601,-63.768129,1.585)); +#221143 = VECTOR('',#221144,1.); +#221144 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221145 = ORIENTED_EDGE('',*,*,#221146,.T.); +#221146 = EDGE_CURVE('',#221139,#221147,#221149,.T.); +#221147 = VERTEX_POINT('',#221148); +#221148 = CARTESIAN_POINT('',(200.015194,-64.138253,1.585)); +#221149 = CIRCLE('',#221150,0.305621483548); +#221150 = AXIS2_PLACEMENT_3D('',#221151,#221152,#221153); +#221151 = CARTESIAN_POINT('',(200.269266,-63.9683945,1.585)); +#221152 = DIRECTION('',(0.,0.,1.)); +#221153 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#221154 = ORIENTED_EDGE('',*,*,#221155,.T.); +#221155 = EDGE_CURVE('',#221147,#221156,#221158,.T.); +#221156 = VERTEX_POINT('',#221157); +#221157 = CARTESIAN_POINT('',(200.045601,-64.168661,1.585)); +#221158 = LINE('',#221159,#221160); +#221159 = CARTESIAN_POINT('',(200.015194,-64.138253,1.585)); +#221160 = VECTOR('',#221161,1.); +#221161 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#221162 = ORIENTED_EDGE('',*,*,#221163,.T.); +#221163 = EDGE_CURVE('',#221156,#221164,#221166,.T.); +#221164 = VERTEX_POINT('',#221165); +#221165 = CARTESIAN_POINT('',(200.337698,-64.168661,1.585)); +#221166 = CIRCLE('',#221167,0.252888498466); +#221167 = AXIS2_PLACEMENT_3D('',#221168,#221169,#221170); +#221168 = CARTESIAN_POINT('',(200.1916495,-63.962209,1.585)); +#221169 = DIRECTION('',(0.,0.,1.)); +#221170 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#221171 = ORIENTED_EDGE('',*,*,#221172,.T.); +#221172 = EDGE_CURVE('',#221164,#221173,#221175,.T.); +#221173 = VERTEX_POINT('',#221174); +#221174 = CARTESIAN_POINT('',(200.368105,-64.138253,1.585)); +#221175 = LINE('',#221176,#221177); +#221176 = CARTESIAN_POINT('',(200.337698,-64.168661,1.585)); +#221177 = VECTOR('',#221178,1.); +#221178 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#221179 = ORIENTED_EDGE('',*,*,#221180,.T.); +#221180 = EDGE_CURVE('',#221173,#221181,#221183,.T.); +#221181 = VERTEX_POINT('',#221182); +#221182 = CARTESIAN_POINT('',(200.368106,-63.798536,1.585)); +#221183 = CIRCLE('',#221184,0.305616146029); +#221184 = AXIS2_PLACEMENT_3D('',#221185,#221186,#221187); +#221185 = CARTESIAN_POINT('',(200.11403992049,-63.96839375212,1.585)); +#221186 = DIRECTION('',(0.,-0.,1.)); +#221187 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#221188 = ORIENTED_EDGE('',*,*,#221189,.T.); +#221189 = EDGE_CURVE('',#221181,#221128,#221190,.T.); +#221190 = LINE('',#221191,#221192); +#221191 = CARTESIAN_POINT('',(200.368106,-63.798536,1.585)); +#221192 = VECTOR('',#221193,1.); +#221193 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#221194 = PLANE('',#221195); +#221195 = AXIS2_PLACEMENT_3D('',#221196,#221197,#221198); +#221196 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221197 = DIRECTION('',(0.,0.,1.)); +#221198 = DIRECTION('',(1.,0.,-0.)); +#221199 = SHELL_BASED_SURFACE_MODEL('',(#221200)); +#221200 = OPEN_SHELL('',(#221201)); +#221201 = ADVANCED_FACE('',(#221202),#221288,.T.); +#221202 = FACE_BOUND('',#221203,.F.); +#221203 = EDGE_LOOP('',(#221204,#221215,#221223,#221232,#221240,#221248, + #221256,#221265,#221273,#221282)); +#221204 = ORIENTED_EDGE('',*,*,#221205,.T.); +#221205 = EDGE_CURVE('',#221206,#221208,#221210,.T.); +#221206 = VERTEX_POINT('',#221207); +#221207 = CARTESIAN_POINT('',(87.47165,-59.6731,1.585)); +#221208 = VERTEX_POINT('',#221209); +#221209 = CARTESIAN_POINT('',(87.53165,-59.6131,1.585)); +#221210 = CIRCLE('',#221211,5.999932016263E-02); +#221211 = AXIS2_PLACEMENT_3D('',#221212,#221213,#221214); +#221212 = CARTESIAN_POINT('',(87.531649320159,-59.67309932015,1.585)); +#221213 = DIRECTION('',(0.,0.,-1.)); +#221214 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#221215 = ORIENTED_EDGE('',*,*,#221216,.T.); +#221216 = EDGE_CURVE('',#221208,#221217,#221219,.T.); +#221217 = VERTEX_POINT('',#221218); +#221218 = CARTESIAN_POINT('',(93.34165,-59.6131,1.585)); +#221219 = LINE('',#221220,#221221); +#221220 = CARTESIAN_POINT('',(87.53165,-59.6131,1.585)); +#221221 = VECTOR('',#221222,1.); +#221222 = DIRECTION('',(1.,0.,0.)); +#221223 = ORIENTED_EDGE('',*,*,#221224,.T.); +#221224 = EDGE_CURVE('',#221217,#221225,#221227,.T.); +#221225 = VERTEX_POINT('',#221226); +#221226 = CARTESIAN_POINT('',(93.34165,-59.7331,1.585)); +#221227 = CIRCLE('',#221228,6.000000000042E-02); +#221228 = AXIS2_PLACEMENT_3D('',#221229,#221230,#221231); +#221229 = CARTESIAN_POINT('',(93.341650225588,-59.6731,1.585)); +#221230 = DIRECTION('',(0.,0.,-1.)); +#221231 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#221232 = ORIENTED_EDGE('',*,*,#221233,.T.); +#221233 = EDGE_CURVE('',#221225,#221234,#221236,.T.); +#221234 = VERTEX_POINT('',#221235); +#221235 = CARTESIAN_POINT('',(87.59165,-59.7331,1.585)); +#221236 = LINE('',#221237,#221238); +#221237 = CARTESIAN_POINT('',(93.34165,-59.7331,1.585)); +#221238 = VECTOR('',#221239,1.); +#221239 = DIRECTION('',(-1.,0.,0.)); +#221240 = ORIENTED_EDGE('',*,*,#221241,.T.); +#221241 = EDGE_CURVE('',#221234,#221242,#221244,.T.); +#221242 = VERTEX_POINT('',#221243); +#221243 = CARTESIAN_POINT('',(87.59165,-63.9131,1.585)); +#221244 = LINE('',#221245,#221246); +#221245 = CARTESIAN_POINT('',(87.59165,-59.7331,1.585)); +#221246 = VECTOR('',#221247,1.); +#221247 = DIRECTION('',(0.,-1.,0.)); +#221248 = ORIENTED_EDGE('',*,*,#221249,.T.); +#221249 = EDGE_CURVE('',#221242,#221250,#221252,.T.); +#221250 = VERTEX_POINT('',#221251); +#221251 = CARTESIAN_POINT('',(93.34165,-63.9131,1.585)); +#221252 = LINE('',#221253,#221254); +#221253 = CARTESIAN_POINT('',(87.59165,-63.9131,1.585)); +#221254 = VECTOR('',#221255,1.); +#221255 = DIRECTION('',(1.,0.,0.)); +#221256 = ORIENTED_EDGE('',*,*,#221257,.T.); +#221257 = EDGE_CURVE('',#221250,#221258,#221260,.T.); +#221258 = VERTEX_POINT('',#221259); +#221259 = CARTESIAN_POINT('',(93.34165,-64.0331,1.585)); +#221260 = CIRCLE('',#221261,6.000000000043E-02); +#221261 = AXIS2_PLACEMENT_3D('',#221262,#221263,#221264); +#221262 = CARTESIAN_POINT('',(93.341650225588,-63.9731,1.585)); +#221263 = DIRECTION('',(0.,0.,-1.)); +#221264 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#221265 = ORIENTED_EDGE('',*,*,#221266,.T.); +#221266 = EDGE_CURVE('',#221258,#221267,#221269,.T.); +#221267 = VERTEX_POINT('',#221268); +#221268 = CARTESIAN_POINT('',(87.53165,-64.0331,1.585)); +#221269 = LINE('',#221270,#221271); +#221270 = CARTESIAN_POINT('',(93.34165,-64.0331,1.585)); +#221271 = VECTOR('',#221272,1.); +#221272 = DIRECTION('',(-1.,0.,0.)); +#221273 = ORIENTED_EDGE('',*,*,#221274,.T.); +#221274 = EDGE_CURVE('',#221267,#221275,#221277,.T.); +#221275 = VERTEX_POINT('',#221276); +#221276 = CARTESIAN_POINT('',(87.47165,-63.9731,1.585)); +#221277 = CIRCLE('',#221278,5.999932016264E-02); +#221278 = AXIS2_PLACEMENT_3D('',#221279,#221280,#221281); +#221279 = CARTESIAN_POINT('',(87.531649320159,-63.97310067984,1.585)); +#221280 = DIRECTION('',(0.,0.,-1.)); +#221281 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#221282 = ORIENTED_EDGE('',*,*,#221283,.T.); +#221283 = EDGE_CURVE('',#221275,#221206,#221284,.T.); +#221284 = LINE('',#221285,#221286); +#221285 = CARTESIAN_POINT('',(87.47165,-63.9731,1.585)); +#221286 = VECTOR('',#221287,1.); +#221287 = DIRECTION('',(0.,1.,0.)); +#221288 = PLANE('',#221289); +#221289 = AXIS2_PLACEMENT_3D('',#221290,#221291,#221292); +#221290 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221291 = DIRECTION('',(0.,0.,1.)); +#221292 = DIRECTION('',(1.,0.,-0.)); +#221293 = SHELL_BASED_SURFACE_MODEL('',(#221294)); +#221294 = OPEN_SHELL('',(#221295)); +#221295 = ADVANCED_FACE('',(#221296,#221484),#221618,.T.); +#221296 = FACE_BOUND('',#221297,.F.); +#221297 = EDGE_LOOP('',(#221298,#221309,#221317,#221325,#221333,#221341, + #221349,#221357,#221365,#221373,#221381,#221390,#221398,#221406, + #221414,#221422,#221430,#221438,#221446,#221454,#221462,#221470, + #221478)); +#221298 = ORIENTED_EDGE('',*,*,#221299,.T.); +#221299 = EDGE_CURVE('',#221300,#221302,#221304,.T.); +#221300 = VERTEX_POINT('',#221301); +#221301 = CARTESIAN_POINT('',(138.043497,-62.789318,1.585)); +#221302 = VERTEX_POINT('',#221303); +#221303 = CARTESIAN_POINT('',(138.511568,-62.794686,1.585)); +#221304 = CIRCLE('',#221305,0.397578964435); +#221305 = AXIS2_PLACEMENT_3D('',#221306,#221307,#221308); +#221306 = CARTESIAN_POINT('',(138.27384697212,-63.11336726061,1.585)); +#221307 = DIRECTION('',(0.,0.,-1.)); +#221308 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#221309 = ORIENTED_EDGE('',*,*,#221310,.T.); +#221310 = EDGE_CURVE('',#221302,#221311,#221313,.T.); +#221311 = VERTEX_POINT('',#221312); +#221312 = CARTESIAN_POINT('',(138.621884,-62.906008,1.585)); +#221313 = LINE('',#221314,#221315); +#221314 = CARTESIAN_POINT('',(138.511568,-62.794686,1.585)); +#221315 = VECTOR('',#221316,1.); +#221316 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#221317 = ORIENTED_EDGE('',*,*,#221318,.T.); +#221318 = EDGE_CURVE('',#221311,#221319,#221321,.T.); +#221319 = VERTEX_POINT('',#221320); +#221320 = CARTESIAN_POINT('',(138.632284,-62.929486,1.585)); +#221321 = LINE('',#221322,#221323); +#221322 = CARTESIAN_POINT('',(138.621884,-62.906008,1.585)); +#221323 = VECTOR('',#221324,1.); +#221324 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#221325 = ORIENTED_EDGE('',*,*,#221326,.T.); +#221326 = EDGE_CURVE('',#221319,#221327,#221329,.T.); +#221327 = VERTEX_POINT('',#221328); +#221328 = CARTESIAN_POINT('',(138.682142,-63.138152,1.585)); +#221329 = LINE('',#221330,#221331); +#221330 = CARTESIAN_POINT('',(138.632284,-62.929486,1.585)); +#221331 = VECTOR('',#221332,1.); +#221332 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#221333 = ORIENTED_EDGE('',*,*,#221334,.T.); +#221334 = EDGE_CURVE('',#221327,#221335,#221337,.T.); +#221335 = VERTEX_POINT('',#221336); +#221336 = CARTESIAN_POINT('',(138.679903,-63.489675,1.585)); +#221337 = LINE('',#221338,#221339); +#221338 = CARTESIAN_POINT('',(138.682142,-63.138152,1.585)); +#221339 = VECTOR('',#221340,1.); +#221340 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#221341 = ORIENTED_EDGE('',*,*,#221342,.T.); +#221342 = EDGE_CURVE('',#221335,#221343,#221345,.T.); +#221343 = VERTEX_POINT('',#221344); +#221344 = CARTESIAN_POINT('',(138.627337,-63.693997,1.585)); +#221345 = LINE('',#221346,#221347); +#221346 = CARTESIAN_POINT('',(138.679903,-63.489675,1.585)); +#221347 = VECTOR('',#221348,1.); +#221348 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#221349 = ORIENTED_EDGE('',*,*,#221350,.T.); +#221350 = EDGE_CURVE('',#221343,#221351,#221353,.T.); +#221351 = VERTEX_POINT('',#221352); +#221352 = CARTESIAN_POINT('',(138.612557,-63.714993,1.585)); +#221353 = LINE('',#221354,#221355); +#221354 = CARTESIAN_POINT('',(138.627337,-63.693997,1.585)); +#221355 = VECTOR('',#221356,1.); +#221356 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#221357 = ORIENTED_EDGE('',*,*,#221358,.T.); +#221358 = EDGE_CURVE('',#221351,#221359,#221361,.T.); +#221359 = VERTEX_POINT('',#221360); +#221360 = CARTESIAN_POINT('',(138.57035,-63.757199,1.585)); +#221361 = LINE('',#221362,#221363); +#221362 = CARTESIAN_POINT('',(138.612557,-63.714993,1.585)); +#221363 = VECTOR('',#221364,1.); +#221364 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#221365 = ORIENTED_EDGE('',*,*,#221366,.T.); +#221366 = EDGE_CURVE('',#221359,#221367,#221369,.T.); +#221367 = VERTEX_POINT('',#221368); +#221368 = CARTESIAN_POINT('',(138.60395,-63.790799,1.585)); +#221369 = LINE('',#221370,#221371); +#221370 = CARTESIAN_POINT('',(138.57035,-63.757199,1.585)); +#221371 = VECTOR('',#221372,1.); +#221372 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#221373 = ORIENTED_EDGE('',*,*,#221374,.T.); +#221374 = EDGE_CURVE('',#221367,#221375,#221377,.T.); +#221375 = VERTEX_POINT('',#221376); +#221376 = CARTESIAN_POINT('',(138.700745,-63.840807,1.585)); +#221377 = LINE('',#221378,#221379); +#221378 = CARTESIAN_POINT('',(138.60395,-63.790799,1.585)); +#221379 = VECTOR('',#221380,1.); +#221380 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#221381 = ORIENTED_EDGE('',*,*,#221382,.T.); +#221382 = EDGE_CURVE('',#221375,#221383,#221385,.T.); +#221383 = VERTEX_POINT('',#221384); +#221384 = CARTESIAN_POINT('',(138.62122,-63.967139,1.585)); +#221385 = CIRCLE('',#221386,7.500029440362E-02); +#221386 = AXIS2_PLACEMENT_3D('',#221387,#221388,#221389); +#221387 = CARTESIAN_POINT('',(138.65476105397,-63.90005664867,1.585)); +#221388 = DIRECTION('',(0.,0.,-1.)); +#221389 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#221390 = ORIENTED_EDGE('',*,*,#221391,.T.); +#221391 = EDGE_CURVE('',#221383,#221392,#221394,.T.); +#221392 = VERTEX_POINT('',#221393); +#221393 = CARTESIAN_POINT('',(138.51224,-63.910191,1.585)); +#221394 = LINE('',#221395,#221396); +#221395 = CARTESIAN_POINT('',(138.62122,-63.967139,1.585)); +#221396 = VECTOR('',#221397,1.); +#221397 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#221398 = ORIENTED_EDGE('',*,*,#221399,.T.); +#221399 = EDGE_CURVE('',#221392,#221400,#221402,.T.); +#221400 = VERTEX_POINT('',#221401); +#221401 = CARTESIAN_POINT('',(138.449476,-63.848457,1.585)); +#221402 = LINE('',#221403,#221404); +#221403 = CARTESIAN_POINT('',(138.51224,-63.910191,1.585)); +#221404 = VECTOR('',#221405,1.); +#221405 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#221406 = ORIENTED_EDGE('',*,*,#221407,.T.); +#221407 = EDGE_CURVE('',#221400,#221408,#221410,.T.); +#221408 = VERTEX_POINT('',#221409); +#221409 = CARTESIAN_POINT('',(138.383679,-63.878378,1.585)); +#221410 = LINE('',#221411,#221412); +#221411 = CARTESIAN_POINT('',(138.449476,-63.848457,1.585)); +#221412 = VECTOR('',#221413,1.); +#221413 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#221414 = ORIENTED_EDGE('',*,*,#221415,.T.); +#221415 = EDGE_CURVE('',#221408,#221416,#221418,.T.); +#221416 = VERTEX_POINT('',#221417); +#221417 = CARTESIAN_POINT('',(138.158761,-63.877156,1.585)); +#221418 = LINE('',#221419,#221420); +#221419 = CARTESIAN_POINT('',(138.383679,-63.878378,1.585)); +#221420 = VECTOR('',#221421,1.); +#221421 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#221422 = ORIENTED_EDGE('',*,*,#221423,.T.); +#221423 = EDGE_CURVE('',#221416,#221424,#221426,.T.); +#221424 = VERTEX_POINT('',#221425); +#221425 = CARTESIAN_POINT('',(138.03605,-63.814953,1.585)); +#221426 = LINE('',#221427,#221428); +#221427 = CARTESIAN_POINT('',(138.158761,-63.877156,1.585)); +#221428 = VECTOR('',#221429,1.); +#221429 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#221430 = ORIENTED_EDGE('',*,*,#221431,.T.); +#221431 = EDGE_CURVE('',#221424,#221432,#221434,.T.); +#221432 = VERTEX_POINT('',#221433); +#221433 = CARTESIAN_POINT('',(137.925734,-63.703628,1.585)); +#221434 = LINE('',#221435,#221436); +#221435 = CARTESIAN_POINT('',(138.03605,-63.814953,1.585)); +#221436 = VECTOR('',#221437,1.); +#221437 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#221438 = ORIENTED_EDGE('',*,*,#221439,.T.); +#221439 = EDGE_CURVE('',#221432,#221440,#221442,.T.); +#221440 = VERTEX_POINT('',#221441); +#221441 = CARTESIAN_POINT('',(137.915334,-63.680151,1.585)); +#221442 = LINE('',#221443,#221444); +#221443 = CARTESIAN_POINT('',(137.925734,-63.703628,1.585)); +#221444 = VECTOR('',#221445,1.); +#221445 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#221446 = ORIENTED_EDGE('',*,*,#221447,.T.); +#221447 = EDGE_CURVE('',#221440,#221448,#221450,.T.); +#221448 = VERTEX_POINT('',#221449); +#221449 = CARTESIAN_POINT('',(137.865476,-63.471485,1.585)); +#221450 = LINE('',#221451,#221452); +#221451 = CARTESIAN_POINT('',(137.915334,-63.680151,1.585)); +#221452 = VECTOR('',#221453,1.); +#221453 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#221454 = ORIENTED_EDGE('',*,*,#221455,.T.); +#221455 = EDGE_CURVE('',#221448,#221456,#221458,.T.); +#221456 = VERTEX_POINT('',#221457); +#221457 = CARTESIAN_POINT('',(137.867715,-63.119962,1.585)); +#221458 = LINE('',#221459,#221460); +#221459 = CARTESIAN_POINT('',(137.865476,-63.471485,1.585)); +#221460 = VECTOR('',#221461,1.); +#221461 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#221462 = ORIENTED_EDGE('',*,*,#221463,.T.); +#221463 = EDGE_CURVE('',#221456,#221464,#221466,.T.); +#221464 = VERTEX_POINT('',#221465); +#221465 = CARTESIAN_POINT('',(137.920281,-62.91564,1.585)); +#221466 = LINE('',#221467,#221468); +#221467 = CARTESIAN_POINT('',(137.867715,-63.119962,1.585)); +#221468 = VECTOR('',#221469,1.); +#221469 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#221470 = ORIENTED_EDGE('',*,*,#221471,.T.); +#221471 = EDGE_CURVE('',#221464,#221472,#221474,.T.); +#221472 = VERTEX_POINT('',#221473); +#221473 = CARTESIAN_POINT('',(137.935062,-62.894643,1.585)); +#221474 = LINE('',#221475,#221476); +#221475 = CARTESIAN_POINT('',(137.920281,-62.91564,1.585)); +#221476 = VECTOR('',#221477,1.); +#221477 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#221478 = ORIENTED_EDGE('',*,*,#221479,.T.); +#221479 = EDGE_CURVE('',#221472,#221300,#221480,.T.); +#221480 = LINE('',#221481,#221482); +#221481 = CARTESIAN_POINT('',(137.935062,-62.894643,1.585)); +#221482 = VECTOR('',#221483,1.); +#221483 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#221484 = FACE_BOUND('',#221485,.F.); +#221485 = EDGE_LOOP('',(#221486,#221497,#221505,#221514,#221522,#221530, + #221538,#221546,#221554,#221562,#221571,#221579,#221587,#221595, + #221603,#221612)); +#221486 = ORIENTED_EDGE('',*,*,#221487,.T.); +#221487 = EDGE_CURVE('',#221488,#221490,#221492,.T.); +#221488 = VERTEX_POINT('',#221489); +#221489 = CARTESIAN_POINT('',(138.419858,-62.914077,1.585)); +#221490 = VERTEX_POINT('',#221491); +#221491 = CARTESIAN_POINT('',(138.12776,-62.914077,1.585)); +#221492 = CIRCLE('',#221493,0.252889603602); +#221493 = AXIS2_PLACEMENT_3D('',#221494,#221495,#221496); +#221494 = CARTESIAN_POINT('',(138.273809,-63.12053,1.585)); +#221495 = DIRECTION('',(0.,0.,1.)); +#221496 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#221497 = ORIENTED_EDGE('',*,*,#221498,.T.); +#221498 = EDGE_CURVE('',#221490,#221499,#221501,.T.); +#221499 = VERTEX_POINT('',#221500); +#221500 = CARTESIAN_POINT('',(138.055817,-62.986019,1.585)); +#221501 = LINE('',#221502,#221503); +#221502 = CARTESIAN_POINT('',(138.12776,-62.914077,1.585)); +#221503 = VECTOR('',#221504,1.); +#221504 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#221505 = ORIENTED_EDGE('',*,*,#221506,.T.); +#221506 = EDGE_CURVE('',#221499,#221507,#221509,.T.); +#221507 = VERTEX_POINT('',#221508); +#221508 = CARTESIAN_POINT('',(138.055817,-63.623617,1.585)); +#221509 = CIRCLE('',#221510,0.985308713639); +#221510 = AXIS2_PLACEMENT_3D('',#221511,#221512,#221513); +#221511 = CARTESIAN_POINT('',(138.9881262077,-63.304818,1.585)); +#221512 = DIRECTION('',(0.,0.,1.)); +#221513 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#221514 = ORIENTED_EDGE('',*,*,#221515,.T.); +#221515 = EDGE_CURVE('',#221507,#221516,#221518,.T.); +#221516 = VERTEX_POINT('',#221517); +#221517 = CARTESIAN_POINT('',(138.12776,-63.695561,1.585)); +#221518 = LINE('',#221519,#221520); +#221519 = CARTESIAN_POINT('',(138.055817,-63.623617,1.585)); +#221520 = VECTOR('',#221521,1.); +#221521 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#221522 = ORIENTED_EDGE('',*,*,#221523,.T.); +#221523 = EDGE_CURVE('',#221516,#221524,#221526,.T.); +#221524 = VERTEX_POINT('',#221525); +#221525 = CARTESIAN_POINT('',(138.196276,-63.729819,1.585)); +#221526 = LINE('',#221527,#221528); +#221527 = CARTESIAN_POINT('',(138.12776,-63.695561,1.585)); +#221528 = VECTOR('',#221529,1.); +#221529 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#221530 = ORIENTED_EDGE('',*,*,#221531,.T.); +#221531 = EDGE_CURVE('',#221524,#221532,#221534,.T.); +#221532 = VERTEX_POINT('',#221533); +#221533 = CARTESIAN_POINT('',(138.330839,-63.729819,1.585)); +#221534 = LINE('',#221535,#221536); +#221535 = CARTESIAN_POINT('',(138.196276,-63.729819,1.585)); +#221536 = VECTOR('',#221537,1.); +#221537 = DIRECTION('',(1.,0.,0.)); +#221538 = ORIENTED_EDGE('',*,*,#221539,.T.); +#221539 = EDGE_CURVE('',#221532,#221540,#221542,.T.); +#221540 = VERTEX_POINT('',#221541); +#221541 = CARTESIAN_POINT('',(138.277,-63.67598,1.585)); +#221542 = LINE('',#221543,#221544); +#221543 = CARTESIAN_POINT('',(138.330839,-63.729819,1.585)); +#221544 = VECTOR('',#221545,1.); +#221545 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#221546 = ORIENTED_EDGE('',*,*,#221547,.T.); +#221547 = EDGE_CURVE('',#221540,#221548,#221550,.T.); +#221548 = VERTEX_POINT('',#221549); +#221549 = CARTESIAN_POINT('',(138.208485,-63.641723,1.585)); +#221550 = LINE('',#221551,#221552); +#221551 = CARTESIAN_POINT('',(138.277,-63.67598,1.585)); +#221552 = VECTOR('',#221553,1.); +#221553 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#221554 = ORIENTED_EDGE('',*,*,#221555,.T.); +#221555 = EDGE_CURVE('',#221548,#221556,#221558,.T.); +#221556 = VERTEX_POINT('',#221557); +#221557 = CARTESIAN_POINT('',(138.11632,-63.640282,1.585)); +#221558 = LINE('',#221559,#221560); +#221559 = CARTESIAN_POINT('',(138.208485,-63.641723,1.585)); +#221560 = VECTOR('',#221561,1.); +#221561 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#221562 = ORIENTED_EDGE('',*,*,#221563,.T.); +#221563 = EDGE_CURVE('',#221556,#221564,#221566,.T.); +#221564 = VERTEX_POINT('',#221565); +#221565 = CARTESIAN_POINT('',(138.130952,-63.491723,1.585)); +#221566 = CIRCLE('',#221567,7.500006711464E-02); +#221567 = AXIS2_PLACEMENT_3D('',#221568,#221569,#221570); +#221568 = CARTESIAN_POINT('',(138.13095193288,-63.56672306711,1.585)); +#221569 = DIRECTION('',(0.,0.,-1.)); +#221570 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#221571 = ORIENTED_EDGE('',*,*,#221572,.T.); +#221572 = EDGE_CURVE('',#221564,#221573,#221575,.T.); +#221573 = VERTEX_POINT('',#221574); +#221574 = CARTESIAN_POINT('',(138.245999,-63.494386,1.585)); +#221575 = LINE('',#221576,#221577); +#221576 = CARTESIAN_POINT('',(138.130952,-63.491723,1.585)); +#221577 = VECTOR('',#221578,1.); +#221578 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#221579 = ORIENTED_EDGE('',*,*,#221580,.T.); +#221580 = EDGE_CURVE('',#221573,#221581,#221583,.T.); +#221581 = VERTEX_POINT('',#221582); +#221582 = CARTESIAN_POINT('',(138.368711,-63.55659,1.585)); +#221583 = LINE('',#221584,#221585); +#221584 = CARTESIAN_POINT('',(138.245999,-63.494386,1.585)); +#221585 = VECTOR('',#221586,1.); +#221586 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#221587 = ORIENTED_EDGE('',*,*,#221588,.T.); +#221588 = EDGE_CURVE('',#221581,#221589,#221591,.T.); +#221589 = VERTEX_POINT('',#221590); +#221590 = CARTESIAN_POINT('',(138.464284,-63.651133,1.585)); +#221591 = LINE('',#221592,#221593); +#221592 = CARTESIAN_POINT('',(138.368711,-63.55659,1.585)); +#221593 = VECTOR('',#221594,1.); +#221594 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#221595 = ORIENTED_EDGE('',*,*,#221596,.T.); +#221596 = EDGE_CURVE('',#221589,#221597,#221599,.T.); +#221597 = VERTEX_POINT('',#221598); +#221598 = CARTESIAN_POINT('',(138.4918,-63.623617,1.585)); +#221599 = LINE('',#221600,#221601); +#221600 = CARTESIAN_POINT('',(138.464284,-63.651133,1.585)); +#221601 = VECTOR('',#221602,1.); +#221602 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#221603 = ORIENTED_EDGE('',*,*,#221604,.T.); +#221604 = EDGE_CURVE('',#221597,#221605,#221607,.T.); +#221605 = VERTEX_POINT('',#221606); +#221606 = CARTESIAN_POINT('',(138.4918,-62.986019,1.585)); +#221607 = CIRCLE('',#221608,0.985282207897); +#221608 = AXIS2_PLACEMENT_3D('',#221609,#221610,#221611); +#221609 = CARTESIAN_POINT('',(137.55951880486,-63.304818,1.585)); +#221610 = DIRECTION('',(0.,-0.,1.)); +#221611 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#221612 = ORIENTED_EDGE('',*,*,#221613,.T.); +#221613 = EDGE_CURVE('',#221605,#221488,#221614,.T.); +#221614 = LINE('',#221615,#221616); +#221615 = CARTESIAN_POINT('',(138.4918,-62.986019,1.585)); +#221616 = VECTOR('',#221617,1.); +#221617 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221618 = PLANE('',#221619); +#221619 = AXIS2_PLACEMENT_3D('',#221620,#221621,#221622); +#221620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221621 = DIRECTION('',(0.,0.,1.)); +#221622 = DIRECTION('',(1.,0.,-0.)); +#221623 = SHELL_BASED_SURFACE_MODEL('',(#221624)); +#221624 = OPEN_SHELL('',(#221625)); +#221625 = ADVANCED_FACE('',(#221626),#221760,.T.); +#221626 = FACE_BOUND('',#221627,.F.); +#221627 = EDGE_LOOP('',(#221628,#221638,#221646,#221655,#221663,#221671, + #221680,#221688,#221697,#221705,#221713,#221721,#221729,#221738, + #221746,#221754)); +#221628 = ORIENTED_EDGE('',*,*,#221629,.T.); +#221629 = EDGE_CURVE('',#221630,#221632,#221634,.T.); +#221630 = VERTEX_POINT('',#221631); +#221631 = CARTESIAN_POINT('',(179.114752,-62.794941,1.585)); +#221632 = VERTEX_POINT('',#221633); +#221633 = CARTESIAN_POINT('',(179.153208,-62.77436,1.585)); +#221634 = LINE('',#221635,#221636); +#221635 = CARTESIAN_POINT('',(179.114752,-62.794941,1.585)); +#221636 = VECTOR('',#221637,1.); +#221637 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#221638 = ORIENTED_EDGE('',*,*,#221639,.T.); +#221639 = EDGE_CURVE('',#221632,#221640,#221642,.T.); +#221640 = VERTEX_POINT('',#221641); +#221641 = CARTESIAN_POINT('',(179.175045,-62.77436,1.585)); +#221642 = LINE('',#221643,#221644); +#221643 = CARTESIAN_POINT('',(179.153208,-62.77436,1.585)); +#221644 = VECTOR('',#221645,1.); +#221645 = DIRECTION('',(1.,0.,0.)); +#221646 = ORIENTED_EDGE('',*,*,#221647,.T.); +#221647 = EDGE_CURVE('',#221640,#221648,#221650,.T.); +#221648 = VERTEX_POINT('',#221649); +#221649 = CARTESIAN_POINT('',(179.24284,-62.847919,1.585)); +#221650 = CIRCLE('',#221651,7.21689809423E-02); +#221651 = AXIS2_PLACEMENT_3D('',#221652,#221653,#221654); +#221652 = CARTESIAN_POINT('',(179.17068706389,-62.84639728342,1.585)); +#221653 = DIRECTION('',(0.,0.,-1.)); +#221654 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#221655 = ORIENTED_EDGE('',*,*,#221656,.T.); +#221656 = EDGE_CURVE('',#221648,#221657,#221659,.T.); +#221657 = VERTEX_POINT('',#221658); +#221658 = CARTESIAN_POINT('',(179.24284,-63.772919,1.585)); +#221659 = LINE('',#221660,#221661); +#221660 = CARTESIAN_POINT('',(179.24284,-62.847919,1.585)); +#221661 = VECTOR('',#221662,1.); +#221662 = DIRECTION('',(0.,-1.,0.)); +#221663 = ORIENTED_EDGE('',*,*,#221664,.T.); +#221664 = EDGE_CURVE('',#221657,#221665,#221667,.T.); +#221665 = VERTEX_POINT('',#221666); +#221666 = CARTESIAN_POINT('',(179.468186,-63.77436,1.585)); +#221667 = LINE('',#221668,#221669); +#221668 = CARTESIAN_POINT('',(179.24284,-63.772919,1.585)); +#221669 = VECTOR('',#221670,1.); +#221670 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#221671 = ORIENTED_EDGE('',*,*,#221672,.T.); +#221672 = EDGE_CURVE('',#221665,#221673,#221675,.T.); +#221673 = VERTEX_POINT('',#221674); +#221674 = CARTESIAN_POINT('',(179.453554,-63.922919,1.585)); +#221675 = CIRCLE('',#221676,7.500006711463E-02); +#221676 = AXIS2_PLACEMENT_3D('',#221677,#221678,#221679); +#221677 = CARTESIAN_POINT('',(179.45355406711,-63.84791893288,1.585)); +#221678 = DIRECTION('',(0.,0.,-1.)); +#221679 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#221680 = ORIENTED_EDGE('',*,*,#221681,.T.); +#221681 = EDGE_CURVE('',#221673,#221682,#221684,.T.); +#221682 = VERTEX_POINT('',#221683); +#221683 = CARTESIAN_POINT('',(178.867494,-63.921478,1.585)); +#221684 = LINE('',#221685,#221686); +#221685 = CARTESIAN_POINT('',(179.453554,-63.922919,1.585)); +#221686 = VECTOR('',#221687,1.); +#221687 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#221688 = ORIENTED_EDGE('',*,*,#221689,.T.); +#221689 = EDGE_CURVE('',#221682,#221690,#221692,.T.); +#221690 = VERTEX_POINT('',#221691); +#221691 = CARTESIAN_POINT('',(178.882126,-63.772919,1.585)); +#221692 = CIRCLE('',#221693,7.500006711464E-02); +#221693 = AXIS2_PLACEMENT_3D('',#221694,#221695,#221696); +#221694 = CARTESIAN_POINT('',(178.88212593288,-63.84791906711,1.585)); +#221695 = DIRECTION('',(0.,0.,-1.)); +#221696 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#221697 = ORIENTED_EDGE('',*,*,#221698,.T.); +#221698 = EDGE_CURVE('',#221690,#221699,#221701,.T.); +#221699 = VERTEX_POINT('',#221700); +#221700 = CARTESIAN_POINT('',(179.09284,-63.772919,1.585)); +#221701 = LINE('',#221702,#221703); +#221702 = CARTESIAN_POINT('',(178.882126,-63.772919,1.585)); +#221703 = VECTOR('',#221704,1.); +#221704 = DIRECTION('',(1.,0.,0.)); +#221705 = ORIENTED_EDGE('',*,*,#221706,.T.); +#221706 = EDGE_CURVE('',#221699,#221707,#221709,.T.); +#221707 = VERTEX_POINT('',#221708); +#221708 = CARTESIAN_POINT('',(179.09284,-63.076604,1.585)); +#221709 = LINE('',#221710,#221711); +#221710 = CARTESIAN_POINT('',(179.09284,-63.772919,1.585)); +#221711 = VECTOR('',#221712,1.); +#221712 = DIRECTION('',(0.,1.,0.)); +#221713 = ORIENTED_EDGE('',*,*,#221714,.T.); +#221714 = EDGE_CURVE('',#221707,#221715,#221717,.T.); +#221715 = VERTEX_POINT('',#221716); +#221716 = CARTESIAN_POINT('',(179.017204,-63.149131,1.585)); +#221717 = LINE('',#221718,#221719); +#221718 = CARTESIAN_POINT('',(179.09284,-63.076604,1.585)); +#221719 = VECTOR('',#221720,1.); +#221720 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#221721 = ORIENTED_EDGE('',*,*,#221722,.T.); +#221722 = EDGE_CURVE('',#221715,#221723,#221725,.T.); +#221723 = VERTEX_POINT('',#221724); +#221724 = CARTESIAN_POINT('',(178.901935,-63.20597,1.585)); +#221725 = LINE('',#221726,#221727); +#221726 = CARTESIAN_POINT('',(179.017204,-63.149131,1.585)); +#221727 = VECTOR('',#221728,1.); +#221728 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#221729 = ORIENTED_EDGE('',*,*,#221730,.T.); +#221730 = EDGE_CURVE('',#221723,#221731,#221733,.T.); +#221731 = VERTEX_POINT('',#221732); +#221732 = CARTESIAN_POINT('',(178.848585,-63.066551,1.585)); +#221733 = CIRCLE('',#221734,7.500005272362E-02); +#221734 = AXIS2_PLACEMENT_3D('',#221735,#221736,#221737); +#221735 = CARTESIAN_POINT('',(178.88212555676,-63.13363332972,1.585)); +#221736 = DIRECTION('',(0.,0.,-1.)); +#221737 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#221738 = ORIENTED_EDGE('',*,*,#221739,.T.); +#221739 = EDGE_CURVE('',#221731,#221740,#221742,.T.); +#221740 = VERTEX_POINT('',#221741); +#221741 = CARTESIAN_POINT('',(178.932937,-63.024375,1.585)); +#221742 = LINE('',#221743,#221744); +#221743 = CARTESIAN_POINT('',(178.848585,-63.066551,1.585)); +#221744 = VECTOR('',#221745,1.); +#221745 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#221746 = ORIENTED_EDGE('',*,*,#221747,.T.); +#221747 = EDGE_CURVE('',#221740,#221748,#221750,.T.); +#221748 = VERTEX_POINT('',#221749); +#221749 = CARTESIAN_POINT('',(179.014316,-62.942996,1.585)); +#221750 = LINE('',#221751,#221752); +#221751 = CARTESIAN_POINT('',(178.932937,-63.024375,1.585)); +#221752 = VECTOR('',#221753,1.); +#221753 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#221754 = ORIENTED_EDGE('',*,*,#221755,.T.); +#221755 = EDGE_CURVE('',#221748,#221630,#221756,.T.); +#221756 = LINE('',#221757,#221758); +#221757 = CARTESIAN_POINT('',(179.014316,-62.942996,1.585)); +#221758 = VECTOR('',#221759,1.); +#221759 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#221760 = PLANE('',#221761); +#221761 = AXIS2_PLACEMENT_3D('',#221762,#221763,#221764); +#221762 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221763 = DIRECTION('',(0.,0.,1.)); +#221764 = DIRECTION('',(1.,0.,-0.)); +#221765 = SHELL_BASED_SURFACE_MODEL('',(#221766)); +#221766 = OPEN_SHELL('',(#221767)); +#221767 = ADVANCED_FACE('',(#221768,#221879),#221931,.T.); +#221768 = FACE_BOUND('',#221769,.F.); +#221769 = EDGE_LOOP('',(#221770,#221781,#221789,#221798,#221806,#221815, + #221823,#221831,#221840,#221848,#221856,#221864,#221873)); +#221770 = ORIENTED_EDGE('',*,*,#221771,.T.); +#221771 = EDGE_CURVE('',#221772,#221774,#221776,.T.); +#221772 = VERTEX_POINT('',#221773); +#221773 = CARTESIAN_POINT('',(176.903805,-62.833287,1.585)); +#221774 = VERTEX_POINT('',#221775); +#221775 = CARTESIAN_POINT('',(176.977364,-62.772919,1.585)); +#221776 = CIRCLE('',#221777,7.500074938991E-02); +#221777 = AXIS2_PLACEMENT_3D('',#221778,#221779,#221780); +#221778 = CARTESIAN_POINT('',(176.97736446611,-62.84791974938,1.585)); +#221779 = DIRECTION('',(0.,0.,-1.)); +#221780 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#221781 = ORIENTED_EDGE('',*,*,#221782,.T.); +#221782 = EDGE_CURVE('',#221774,#221783,#221785,.T.); +#221783 = VERTEX_POINT('',#221784); +#221784 = CARTESIAN_POINT('',(177.372948,-62.77436,1.585)); +#221785 = LINE('',#221786,#221787); +#221786 = CARTESIAN_POINT('',(176.977364,-62.772919,1.585)); +#221787 = VECTOR('',#221788,1.); +#221788 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#221789 = ORIENTED_EDGE('',*,*,#221790,.T.); +#221790 = EDGE_CURVE('',#221783,#221791,#221793,.T.); +#221791 = VERTEX_POINT('',#221792); +#221792 = CARTESIAN_POINT('',(177.622351,-63.023763,1.585)); +#221793 = CIRCLE('',#221794,0.347870264855); +#221794 = AXIS2_PLACEMENT_3D('',#221795,#221796,#221797); +#221795 = CARTESIAN_POINT('',(177.28562026502,-63.11109073497,1.585)); +#221796 = DIRECTION('',(0.,0.,-1.)); +#221797 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#221798 = ORIENTED_EDGE('',*,*,#221799,.T.); +#221799 = EDGE_CURVE('',#221791,#221800,#221802,.T.); +#221800 = VERTEX_POINT('',#221801); +#221801 = CARTESIAN_POINT('',(177.621129,-63.201062,1.585)); +#221802 = LINE('',#221803,#221804); +#221803 = CARTESIAN_POINT('',(177.622351,-63.023763,1.585)); +#221804 = VECTOR('',#221805,1.); +#221805 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#221806 = ORIENTED_EDGE('',*,*,#221807,.T.); +#221807 = EDGE_CURVE('',#221800,#221808,#221810,.T.); +#221808 = VERTEX_POINT('',#221809); +#221809 = CARTESIAN_POINT('',(177.372948,-63.445287,1.585)); +#221810 = CIRCLE('',#221811,0.348632345849); +#221811 = AXIS2_PLACEMENT_3D('',#221812,#221813,#221814); +#221812 = CARTESIAN_POINT('',(177.28517919403,-63.1078834593,1.585)); +#221813 = DIRECTION('',(0.,0.,-1.)); +#221814 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#221815 = ORIENTED_EDGE('',*,*,#221816,.T.); +#221816 = EDGE_CURVE('',#221808,#221817,#221819,.T.); +#221817 = VERTEX_POINT('',#221818); +#221818 = CARTESIAN_POINT('',(177.359431,-63.446618,1.585)); +#221819 = LINE('',#221820,#221821); +#221820 = CARTESIAN_POINT('',(177.372948,-63.445287,1.585)); +#221821 = VECTOR('',#221822,1.); +#221822 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#221823 = ORIENTED_EDGE('',*,*,#221824,.T.); +#221824 = EDGE_CURVE('',#221817,#221825,#221827,.T.); +#221825 = VERTEX_POINT('',#221826); +#221826 = CARTESIAN_POINT('',(177.617445,-63.817723,1.585)); +#221827 = LINE('',#221828,#221829); +#221828 = CARTESIAN_POINT('',(177.359431,-63.446618,1.585)); +#221829 = VECTOR('',#221830,1.); +#221830 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#221831 = ORIENTED_EDGE('',*,*,#221832,.T.); +#221832 = EDGE_CURVE('',#221825,#221833,#221835,.T.); +#221833 = VERTEX_POINT('',#221834); +#221834 = CARTESIAN_POINT('',(177.48735,-63.890929,1.585)); +#221835 = CIRCLE('',#221836,7.500005951703E-02); +#221836 = AXIS2_PLACEMENT_3D('',#221837,#221838,#221839); +#221837 = CARTESIAN_POINT('',(177.54879206294,-63.84791874739,1.585)); +#221838 = DIRECTION('',(0.,0.,-1.)); +#221839 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#221840 = ORIENTED_EDGE('',*,*,#221841,.T.); +#221841 = EDGE_CURVE('',#221833,#221842,#221844,.T.); +#221842 = VERTEX_POINT('',#221843); +#221843 = CARTESIAN_POINT('',(177.17641,-63.446728,1.585)); +#221844 = LINE('',#221845,#221846); +#221845 = CARTESIAN_POINT('',(177.48735,-63.890929,1.585)); +#221846 = VECTOR('',#221847,1.); +#221847 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#221848 = ORIENTED_EDGE('',*,*,#221849,.T.); +#221849 = EDGE_CURVE('',#221842,#221850,#221852,.T.); +#221850 = VERTEX_POINT('',#221851); +#221851 = CARTESIAN_POINT('',(177.052364,-63.446728,1.585)); +#221852 = LINE('',#221853,#221854); +#221853 = CARTESIAN_POINT('',(177.17641,-63.446728,1.585)); +#221854 = VECTOR('',#221855,1.); +#221855 = DIRECTION('',(-1.,0.,0.)); +#221856 = ORIENTED_EDGE('',*,*,#221857,.T.); +#221857 = EDGE_CURVE('',#221850,#221858,#221860,.T.); +#221858 = VERTEX_POINT('',#221859); +#221859 = CARTESIAN_POINT('',(177.050923,-63.862551,1.585)); +#221860 = LINE('',#221861,#221862); +#221861 = CARTESIAN_POINT('',(177.052364,-63.446728,1.585)); +#221862 = VECTOR('',#221863,1.); +#221863 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#221864 = ORIENTED_EDGE('',*,*,#221865,.T.); +#221865 = EDGE_CURVE('',#221858,#221866,#221868,.T.); +#221866 = VERTEX_POINT('',#221867); +#221867 = CARTESIAN_POINT('',(176.902364,-63.847919,1.585)); +#221868 = CIRCLE('',#221869,7.500006711464E-02); +#221869 = AXIS2_PLACEMENT_3D('',#221870,#221871,#221872); +#221870 = CARTESIAN_POINT('',(176.97736406711,-63.84791906711,1.585)); +#221871 = DIRECTION('',(-0.,0.,-1.)); +#221872 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#221873 = ORIENTED_EDGE('',*,*,#221874,.T.); +#221874 = EDGE_CURVE('',#221866,#221772,#221875,.T.); +#221875 = LINE('',#221876,#221877); +#221876 = CARTESIAN_POINT('',(176.902364,-63.847919,1.585)); +#221877 = VECTOR('',#221878,1.); +#221878 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#221879 = FACE_BOUND('',#221880,.F.); +#221880 = EDGE_LOOP('',(#221881,#221892,#221900,#221908,#221916,#221925) + ); +#221881 = ORIENTED_EDGE('',*,*,#221882,.T.); +#221882 = EDGE_CURVE('',#221883,#221885,#221887,.T.); +#221883 = VERTEX_POINT('',#221884); +#221884 = CARTESIAN_POINT('',(177.473792,-63.0561,1.585)); +#221885 = VERTEX_POINT('',#221886); +#221886 = CARTESIAN_POINT('',(177.340611,-62.922919,1.585)); +#221887 = CIRCLE('',#221888,0.18686440374); +#221888 = AXIS2_PLACEMENT_3D('',#221889,#221890,#221891); +#221889 = CARTESIAN_POINT('',(177.293075,-63.103636,1.585)); +#221890 = DIRECTION('',(0.,0.,1.)); +#221891 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#221892 = ORIENTED_EDGE('',*,*,#221893,.T.); +#221893 = EDGE_CURVE('',#221885,#221894,#221896,.T.); +#221894 = VERTEX_POINT('',#221895); +#221895 = CARTESIAN_POINT('',(177.052364,-62.922919,1.585)); +#221896 = LINE('',#221897,#221898); +#221897 = CARTESIAN_POINT('',(177.340611,-62.922919,1.585)); +#221898 = VECTOR('',#221899,1.); +#221899 = DIRECTION('',(-1.,0.,0.)); +#221900 = ORIENTED_EDGE('',*,*,#221901,.T.); +#221901 = EDGE_CURVE('',#221894,#221902,#221904,.T.); +#221902 = VERTEX_POINT('',#221903); +#221903 = CARTESIAN_POINT('',(177.052364,-63.296728,1.585)); +#221904 = LINE('',#221905,#221906); +#221905 = CARTESIAN_POINT('',(177.052364,-62.922919,1.585)); +#221906 = VECTOR('',#221907,1.); +#221907 = DIRECTION('',(0.,-1.,0.)); +#221908 = ORIENTED_EDGE('',*,*,#221909,.T.); +#221909 = EDGE_CURVE('',#221902,#221910,#221912,.T.); +#221910 = VERTEX_POINT('',#221911); +#221911 = CARTESIAN_POINT('',(177.340611,-63.296728,1.585)); +#221912 = LINE('',#221913,#221914); +#221913 = CARTESIAN_POINT('',(177.052364,-63.296728,1.585)); +#221914 = VECTOR('',#221915,1.); +#221915 = DIRECTION('',(1.,0.,0.)); +#221916 = ORIENTED_EDGE('',*,*,#221917,.T.); +#221917 = EDGE_CURVE('',#221910,#221918,#221920,.T.); +#221918 = VERTEX_POINT('',#221919); +#221919 = CARTESIAN_POINT('',(177.473792,-63.163547,1.585)); +#221920 = CIRCLE('',#221921,0.18686440374); +#221921 = AXIS2_PLACEMENT_3D('',#221922,#221923,#221924); +#221922 = CARTESIAN_POINT('',(177.293075,-63.116011,1.585)); +#221923 = DIRECTION('',(0.,0.,1.)); +#221924 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#221925 = ORIENTED_EDGE('',*,*,#221926,.T.); +#221926 = EDGE_CURVE('',#221918,#221883,#221927,.T.); +#221927 = LINE('',#221928,#221929); +#221928 = CARTESIAN_POINT('',(177.473792,-63.163547,1.585)); +#221929 = VECTOR('',#221930,1.); +#221930 = DIRECTION('',(0.,1.,0.)); +#221931 = PLANE('',#221932); +#221932 = AXIS2_PLACEMENT_3D('',#221933,#221934,#221935); +#221933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221934 = DIRECTION('',(0.,0.,1.)); +#221935 = DIRECTION('',(1.,0.,-0.)); +#221936 = SHELL_BASED_SURFACE_MODEL('',(#221937)); +#221937 = OPEN_SHELL('',(#221938)); +#221938 = ADVANCED_FACE('',(#221939),#222074,.T.); +#221939 = FACE_BOUND('',#221940,.F.); +#221940 = EDGE_LOOP('',(#221941,#221952,#221960,#221968,#221976,#221985, + #221993,#222001,#222010,#222018,#222026,#222035,#222043,#222051, + #222060,#222068)); +#221941 = ORIENTED_EDGE('',*,*,#221942,.T.); +#221942 = EDGE_CURVE('',#221943,#221945,#221947,.T.); +#221943 = VERTEX_POINT('',#221944); +#221944 = CARTESIAN_POINT('',(178.121857,-62.741051,1.585)); +#221945 = VERTEX_POINT('',#221946); +#221946 = CARTESIAN_POINT('',(178.238991,-62.824018,1.585)); +#221947 = CIRCLE('',#221948,7.499955990672E-02); +#221948 = AXIS2_PLACEMENT_3D('',#221949,#221950,#221951); +#221949 = CARTESIAN_POINT('',(178.16784050095,-62.80030006435,1.585)); +#221950 = DIRECTION('',(0.,0.,-1.)); +#221951 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#221952 = ORIENTED_EDGE('',*,*,#221953,.T.); +#221953 = EDGE_CURVE('',#221945,#221954,#221956,.T.); +#221954 = VERTEX_POINT('',#221955); +#221955 = CARTESIAN_POINT('',(178.033802,-63.439585,1.585)); +#221956 = LINE('',#221957,#221958); +#221957 = CARTESIAN_POINT('',(178.238991,-62.824018,1.585)); +#221958 = VECTOR('',#221959,1.); +#221959 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#221960 = ORIENTED_EDGE('',*,*,#221961,.T.); +#221961 = EDGE_CURVE('',#221954,#221962,#221964,.T.); +#221962 = VERTEX_POINT('',#221963); +#221963 = CARTESIAN_POINT('',(178.330935,-63.439585,1.585)); +#221964 = LINE('',#221965,#221966); +#221965 = CARTESIAN_POINT('',(178.033802,-63.439585,1.585)); +#221966 = VECTOR('',#221967,1.); +#221967 = DIRECTION('',(1.,0.,0.)); +#221968 = ORIENTED_EDGE('',*,*,#221969,.T.); +#221969 = EDGE_CURVE('',#221962,#221970,#221972,.T.); +#221970 = VERTEX_POINT('',#221971); +#221971 = CARTESIAN_POINT('',(178.332376,-63.16662,1.585)); +#221972 = LINE('',#221973,#221974); +#221973 = CARTESIAN_POINT('',(178.330935,-63.439585,1.585)); +#221974 = VECTOR('',#221975,1.); +#221975 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#221976 = ORIENTED_EDGE('',*,*,#221977,.T.); +#221977 = EDGE_CURVE('',#221970,#221978,#221980,.T.); +#221978 = VERTEX_POINT('',#221979); +#221979 = CARTESIAN_POINT('',(178.480935,-63.181252,1.585)); +#221980 = CIRCLE('',#221981,7.500006711463E-02); +#221981 = AXIS2_PLACEMENT_3D('',#221982,#221983,#221984); +#221982 = CARTESIAN_POINT('',(178.40593493288,-63.18125193288,1.585)); +#221983 = DIRECTION('',(0.,0.,-1.)); +#221984 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#221985 = ORIENTED_EDGE('',*,*,#221986,.T.); +#221986 = EDGE_CURVE('',#221978,#221987,#221989,.T.); +#221987 = VERTEX_POINT('',#221988); +#221988 = CARTESIAN_POINT('',(178.480935,-63.439585,1.585)); +#221989 = LINE('',#221990,#221991); +#221990 = CARTESIAN_POINT('',(178.480935,-63.181252,1.585)); +#221991 = VECTOR('',#221992,1.); +#221992 = DIRECTION('',(0.,-1.,0.)); +#221993 = ORIENTED_EDGE('',*,*,#221994,.T.); +#221994 = EDGE_CURVE('',#221987,#221995,#221997,.T.); +#221995 = VERTEX_POINT('',#221996); +#221996 = CARTESIAN_POINT('',(178.563424,-63.441026,1.585)); +#221997 = LINE('',#221998,#221999); +#221998 = CARTESIAN_POINT('',(178.480935,-63.439585,1.585)); +#221999 = VECTOR('',#222000,1.); +#222000 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#222001 = ORIENTED_EDGE('',*,*,#222002,.T.); +#222002 = EDGE_CURVE('',#221995,#222003,#222005,.T.); +#222003 = VERTEX_POINT('',#222004); +#222004 = CARTESIAN_POINT('',(178.548792,-63.589585,1.585)); +#222005 = CIRCLE('',#222006,7.500006711464E-02); +#222006 = AXIS2_PLACEMENT_3D('',#222007,#222008,#222009); +#222007 = CARTESIAN_POINT('',(178.54879206711,-63.51458493288,1.585)); +#222008 = DIRECTION('',(0.,0.,-1.)); +#222009 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#222010 = ORIENTED_EDGE('',*,*,#222011,.T.); +#222011 = EDGE_CURVE('',#222003,#222012,#222014,.T.); +#222012 = VERTEX_POINT('',#222013); +#222013 = CARTESIAN_POINT('',(178.480935,-63.589585,1.585)); +#222014 = LINE('',#222015,#222016); +#222015 = CARTESIAN_POINT('',(178.548792,-63.589585,1.585)); +#222016 = VECTOR('',#222017,1.); +#222017 = DIRECTION('',(-1.,0.,0.)); +#222018 = ORIENTED_EDGE('',*,*,#222019,.T.); +#222019 = EDGE_CURVE('',#222012,#222020,#222022,.T.); +#222020 = VERTEX_POINT('',#222021); +#222021 = CARTESIAN_POINT('',(178.479494,-63.862551,1.585)); +#222022 = LINE('',#222023,#222024); +#222023 = CARTESIAN_POINT('',(178.480935,-63.589585,1.585)); +#222024 = VECTOR('',#222025,1.); +#222025 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#222026 = ORIENTED_EDGE('',*,*,#222027,.T.); +#222027 = EDGE_CURVE('',#222020,#222028,#222030,.T.); +#222028 = VERTEX_POINT('',#222029); +#222029 = CARTESIAN_POINT('',(178.330935,-63.847919,1.585)); +#222030 = CIRCLE('',#222031,7.500006711463E-02); +#222031 = AXIS2_PLACEMENT_3D('',#222032,#222033,#222034); +#222032 = CARTESIAN_POINT('',(178.40593506711,-63.84791906711,1.585)); +#222033 = DIRECTION('',(-0.,0.,-1.)); +#222034 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#222035 = ORIENTED_EDGE('',*,*,#222036,.T.); +#222036 = EDGE_CURVE('',#222028,#222037,#222039,.T.); +#222037 = VERTEX_POINT('',#222038); +#222038 = CARTESIAN_POINT('',(178.330935,-63.589585,1.585)); +#222039 = LINE('',#222040,#222041); +#222040 = CARTESIAN_POINT('',(178.330935,-63.847919,1.585)); +#222041 = VECTOR('',#222042,1.); +#222042 = DIRECTION('',(0.,1.,0.)); +#222043 = ORIENTED_EDGE('',*,*,#222044,.T.); +#222044 = EDGE_CURVE('',#222037,#222045,#222047,.T.); +#222045 = VERTEX_POINT('',#222046); +#222046 = CARTESIAN_POINT('',(177.915113,-63.588144,1.585)); +#222047 = LINE('',#222048,#222049); +#222048 = CARTESIAN_POINT('',(178.330935,-63.589585,1.585)); +#222049 = VECTOR('',#222050,1.); +#222050 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#222051 = ORIENTED_EDGE('',*,*,#222052,.T.); +#222052 = EDGE_CURVE('',#222045,#222053,#222055,.T.); +#222053 = VERTEX_POINT('',#222054); +#222054 = CARTESIAN_POINT('',(177.858594,-63.490868,1.585)); +#222055 = CIRCLE('',#222056,7.499997045039E-02); +#222056 = AXIS2_PLACEMENT_3D('',#222057,#222058,#222059); +#222057 = CARTESIAN_POINT('',(177.92974517257,-63.51458521335,1.585)); +#222058 = DIRECTION('',(0.,0.,-1.)); +#222059 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#222060 = ORIENTED_EDGE('',*,*,#222061,.T.); +#222061 = EDGE_CURVE('',#222053,#222062,#222064,.T.); +#222062 = VERTEX_POINT('',#222063); +#222063 = CARTESIAN_POINT('',(178.102683,-62.763158,1.585)); +#222064 = LINE('',#222065,#222066); +#222065 = CARTESIAN_POINT('',(177.858594,-63.490868,1.585)); +#222066 = VECTOR('',#222067,1.); +#222067 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#222068 = ORIENTED_EDGE('',*,*,#222069,.T.); +#222069 = EDGE_CURVE('',#222062,#221943,#222070,.T.); +#222070 = LINE('',#222071,#222072); +#222071 = CARTESIAN_POINT('',(178.102683,-62.763158,1.585)); +#222072 = VECTOR('',#222073,1.); +#222073 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#222074 = PLANE('',#222075); +#222075 = AXIS2_PLACEMENT_3D('',#222076,#222077,#222078); +#222076 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222077 = DIRECTION('',(0.,0.,1.)); +#222078 = DIRECTION('',(1.,0.,-0.)); +#222079 = SHELL_BASED_SURFACE_MODEL('',(#222080)); +#222080 = OPEN_SHELL('',(#222081)); +#222081 = ADVANCED_FACE('',(#222082),#222216,.T.); +#222082 = FACE_BOUND('',#222083,.F.); +#222083 = EDGE_LOOP('',(#222084,#222094,#222102,#222111,#222119,#222127, + #222136,#222144,#222153,#222161,#222169,#222177,#222185,#222194, + #222202,#222210)); +#222084 = ORIENTED_EDGE('',*,*,#222085,.T.); +#222085 = EDGE_CURVE('',#222086,#222088,#222090,.T.); +#222086 = VERTEX_POINT('',#222087); +#222087 = CARTESIAN_POINT('',(139.220721,-62.751841,1.585)); +#222088 = VERTEX_POINT('',#222089); +#222089 = CARTESIAN_POINT('',(139.259177,-62.73126,1.585)); +#222090 = LINE('',#222091,#222092); +#222091 = CARTESIAN_POINT('',(139.220721,-62.751841,1.585)); +#222092 = VECTOR('',#222093,1.); +#222093 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#222094 = ORIENTED_EDGE('',*,*,#222095,.T.); +#222095 = EDGE_CURVE('',#222088,#222096,#222098,.T.); +#222096 = VERTEX_POINT('',#222097); +#222097 = CARTESIAN_POINT('',(139.281014,-62.73126,1.585)); +#222098 = LINE('',#222099,#222100); +#222099 = CARTESIAN_POINT('',(139.259177,-62.73126,1.585)); +#222100 = VECTOR('',#222101,1.); +#222101 = DIRECTION('',(1.,0.,0.)); +#222102 = ORIENTED_EDGE('',*,*,#222103,.T.); +#222103 = EDGE_CURVE('',#222096,#222104,#222106,.T.); +#222104 = VERTEX_POINT('',#222105); +#222105 = CARTESIAN_POINT('',(139.348809,-62.804819,1.585)); +#222106 = CIRCLE('',#222107,7.216898094225E-02); +#222107 = AXIS2_PLACEMENT_3D('',#222108,#222109,#222110); +#222108 = CARTESIAN_POINT('',(139.27665606389,-62.80329728342,1.585)); +#222109 = DIRECTION('',(0.,0.,-1.)); +#222110 = DIRECTION('',(6.038516895227E-02,0.998175150648,0.)); +#222111 = ORIENTED_EDGE('',*,*,#222112,.T.); +#222112 = EDGE_CURVE('',#222104,#222113,#222115,.T.); +#222113 = VERTEX_POINT('',#222114); +#222114 = CARTESIAN_POINT('',(139.348809,-63.729819,1.585)); +#222115 = LINE('',#222116,#222117); +#222116 = CARTESIAN_POINT('',(139.348809,-62.804819,1.585)); +#222117 = VECTOR('',#222118,1.); +#222118 = DIRECTION('',(0.,-1.,0.)); +#222119 = ORIENTED_EDGE('',*,*,#222120,.T.); +#222120 = EDGE_CURVE('',#222113,#222121,#222123,.T.); +#222121 = VERTEX_POINT('',#222122); +#222122 = CARTESIAN_POINT('',(139.574155,-63.73126,1.585)); +#222123 = LINE('',#222124,#222125); +#222124 = CARTESIAN_POINT('',(139.348809,-63.729819,1.585)); +#222125 = VECTOR('',#222126,1.); +#222126 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#222127 = ORIENTED_EDGE('',*,*,#222128,.T.); +#222128 = EDGE_CURVE('',#222121,#222129,#222131,.T.); +#222129 = VERTEX_POINT('',#222130); +#222130 = CARTESIAN_POINT('',(139.559523,-63.879819,1.585)); +#222131 = CIRCLE('',#222132,7.500006711464E-02); +#222132 = AXIS2_PLACEMENT_3D('',#222133,#222134,#222135); +#222133 = CARTESIAN_POINT('',(139.55952306711,-63.80481893288,1.585)); +#222134 = DIRECTION('',(0.,0.,-1.)); +#222135 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#222136 = ORIENTED_EDGE('',*,*,#222137,.T.); +#222137 = EDGE_CURVE('',#222129,#222138,#222140,.T.); +#222138 = VERTEX_POINT('',#222139); +#222139 = CARTESIAN_POINT('',(138.973463,-63.878378,1.585)); +#222140 = LINE('',#222141,#222142); +#222141 = CARTESIAN_POINT('',(139.559523,-63.879819,1.585)); +#222142 = VECTOR('',#222143,1.); +#222143 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#222144 = ORIENTED_EDGE('',*,*,#222145,.T.); +#222145 = EDGE_CURVE('',#222138,#222146,#222148,.T.); +#222146 = VERTEX_POINT('',#222147); +#222147 = CARTESIAN_POINT('',(138.988095,-63.729819,1.585)); +#222148 = CIRCLE('',#222149,7.500006711464E-02); +#222149 = AXIS2_PLACEMENT_3D('',#222150,#222151,#222152); +#222150 = CARTESIAN_POINT('',(138.98809493288,-63.80481906711,1.585)); +#222151 = DIRECTION('',(0.,0.,-1.)); +#222152 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#222153 = ORIENTED_EDGE('',*,*,#222154,.T.); +#222154 = EDGE_CURVE('',#222146,#222155,#222157,.T.); +#222155 = VERTEX_POINT('',#222156); +#222156 = CARTESIAN_POINT('',(139.198809,-63.729819,1.585)); +#222157 = LINE('',#222158,#222159); +#222158 = CARTESIAN_POINT('',(138.988095,-63.729819,1.585)); +#222159 = VECTOR('',#222160,1.); +#222160 = DIRECTION('',(1.,0.,0.)); +#222161 = ORIENTED_EDGE('',*,*,#222162,.T.); +#222162 = EDGE_CURVE('',#222155,#222163,#222165,.T.); +#222163 = VERTEX_POINT('',#222164); +#222164 = CARTESIAN_POINT('',(139.198809,-63.033504,1.585)); +#222165 = LINE('',#222166,#222167); +#222166 = CARTESIAN_POINT('',(139.198809,-63.729819,1.585)); +#222167 = VECTOR('',#222168,1.); +#222168 = DIRECTION('',(0.,1.,0.)); +#222169 = ORIENTED_EDGE('',*,*,#222170,.T.); +#222170 = EDGE_CURVE('',#222163,#222171,#222173,.T.); +#222171 = VERTEX_POINT('',#222172); +#222172 = CARTESIAN_POINT('',(139.123173,-63.106031,1.585)); +#222173 = LINE('',#222174,#222175); +#222174 = CARTESIAN_POINT('',(139.198809,-63.033504,1.585)); +#222175 = VECTOR('',#222176,1.); +#222176 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#222177 = ORIENTED_EDGE('',*,*,#222178,.T.); +#222178 = EDGE_CURVE('',#222171,#222179,#222181,.T.); +#222179 = VERTEX_POINT('',#222180); +#222180 = CARTESIAN_POINT('',(139.007904,-63.16287,1.585)); +#222181 = LINE('',#222182,#222183); +#222182 = CARTESIAN_POINT('',(139.123173,-63.106031,1.585)); +#222183 = VECTOR('',#222184,1.); +#222184 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#222185 = ORIENTED_EDGE('',*,*,#222186,.T.); +#222186 = EDGE_CURVE('',#222179,#222187,#222189,.T.); +#222187 = VERTEX_POINT('',#222188); +#222188 = CARTESIAN_POINT('',(138.954554,-63.023451,1.585)); +#222189 = CIRCLE('',#222190,7.500005272361E-02); +#222190 = AXIS2_PLACEMENT_3D('',#222191,#222192,#222193); +#222191 = CARTESIAN_POINT('',(138.98809455676,-63.09053332972,1.585)); +#222192 = DIRECTION('',(0.,0.,-1.)); +#222193 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#222194 = ORIENTED_EDGE('',*,*,#222195,.T.); +#222195 = EDGE_CURVE('',#222187,#222196,#222198,.T.); +#222196 = VERTEX_POINT('',#222197); +#222197 = CARTESIAN_POINT('',(139.038906,-62.981275,1.585)); +#222198 = LINE('',#222199,#222200); +#222199 = CARTESIAN_POINT('',(138.954554,-63.023451,1.585)); +#222200 = VECTOR('',#222201,1.); +#222201 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#222202 = ORIENTED_EDGE('',*,*,#222203,.T.); +#222203 = EDGE_CURVE('',#222196,#222204,#222206,.T.); +#222204 = VERTEX_POINT('',#222205); +#222205 = CARTESIAN_POINT('',(139.120285,-62.899896,1.585)); +#222206 = LINE('',#222207,#222208); +#222207 = CARTESIAN_POINT('',(139.038906,-62.981275,1.585)); +#222208 = VECTOR('',#222209,1.); +#222209 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#222210 = ORIENTED_EDGE('',*,*,#222211,.T.); +#222211 = EDGE_CURVE('',#222204,#222086,#222212,.T.); +#222212 = LINE('',#222213,#222214); +#222213 = CARTESIAN_POINT('',(139.120285,-62.899896,1.585)); +#222214 = VECTOR('',#222215,1.); +#222215 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#222216 = PLANE('',#222217); +#222217 = AXIS2_PLACEMENT_3D('',#222218,#222219,#222220); +#222218 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222219 = DIRECTION('',(0.,0.,1.)); +#222220 = DIRECTION('',(1.,0.,-0.)); +#222221 = SHELL_BASED_SURFACE_MODEL('',(#222222)); +#222222 = OPEN_SHELL('',(#222223)); +#222223 = ADVANCED_FACE('',(#222224),#222268,.T.); +#222224 = FACE_BOUND('',#222225,.F.); +#222225 = EDGE_LOOP('',(#222226,#222237,#222245,#222254,#222262)); +#222226 = ORIENTED_EDGE('',*,*,#222227,.T.); +#222227 = EDGE_CURVE('',#222228,#222230,#222232,.T.); +#222228 = VERTEX_POINT('',#222229); +#222229 = CARTESIAN_POINT('',(182.376217,-62.910139,1.585)); +#222230 = VERTEX_POINT('',#222231); +#222231 = CARTESIAN_POINT('',(182.49165,-62.9331,1.585)); +#222232 = CIRCLE('',#222233,6.000007318647E-02); +#222233 = AXIS2_PLACEMENT_3D('',#222234,#222235,#222236); +#222234 = CARTESIAN_POINT('',(182.43164992681,-62.93309982331,1.585)); +#222235 = DIRECTION('',(0.,0.,-1.)); +#222236 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#222237 = ORIENTED_EDGE('',*,*,#222238,.T.); +#222238 = EDGE_CURVE('',#222230,#222239,#222241,.T.); +#222239 = VERTEX_POINT('',#222240); +#222240 = CARTESIAN_POINT('',(182.49165,-63.7131,1.585)); +#222241 = LINE('',#222242,#222243); +#222242 = CARTESIAN_POINT('',(182.49165,-62.9331,1.585)); +#222243 = VECTOR('',#222244,1.); +#222244 = DIRECTION('',(0.,-1.,0.)); +#222245 = ORIENTED_EDGE('',*,*,#222246,.T.); +#222246 = EDGE_CURVE('',#222239,#222247,#222249,.T.); +#222247 = VERTEX_POINT('',#222248); +#222248 = CARTESIAN_POINT('',(182.37165,-63.7131,1.585)); +#222249 = CIRCLE('',#222250,6.000000000043E-02); +#222250 = AXIS2_PLACEMENT_3D('',#222251,#222252,#222253); +#222251 = CARTESIAN_POINT('',(182.43165,-63.71310022558,1.585)); +#222252 = DIRECTION('',(0.,0.,-1.)); +#222253 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#222254 = ORIENTED_EDGE('',*,*,#222255,.T.); +#222255 = EDGE_CURVE('',#222247,#222256,#222258,.T.); +#222256 = VERTEX_POINT('',#222257); +#222257 = CARTESIAN_POINT('',(182.37165,-62.9331,1.585)); +#222258 = LINE('',#222259,#222260); +#222259 = CARTESIAN_POINT('',(182.37165,-63.7131,1.585)); +#222260 = VECTOR('',#222261,1.); +#222261 = DIRECTION('',(0.,1.,0.)); +#222262 = ORIENTED_EDGE('',*,*,#222263,.T.); +#222263 = EDGE_CURVE('',#222256,#222228,#222264,.T.); +#222264 = LINE('',#222265,#222266); +#222265 = CARTESIAN_POINT('',(182.37165,-62.9331,1.585)); +#222266 = VECTOR('',#222267,1.); +#222267 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#222268 = PLANE('',#222269); +#222269 = AXIS2_PLACEMENT_3D('',#222270,#222271,#222272); +#222270 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222271 = DIRECTION('',(0.,0.,1.)); +#222272 = DIRECTION('',(1.,0.,-0.)); +#222273 = SHELL_BASED_SURFACE_MODEL('',(#222274)); +#222274 = OPEN_SHELL('',(#222275)); +#222275 = ADVANCED_FACE('',(#222276,#222464),#222598,.T.); +#222276 = FACE_BOUND('',#222277,.F.); +#222277 = EDGE_LOOP('',(#222278,#222289,#222297,#222305,#222313,#222321, + #222329,#222337,#222345,#222353,#222361,#222370,#222378,#222386, + #222394,#222402,#222410,#222418,#222426,#222434,#222442,#222450, + #222458)); +#222278 = ORIENTED_EDGE('',*,*,#222279,.T.); +#222279 = EDGE_CURVE('',#222280,#222282,#222284,.T.); +#222280 = VERTEX_POINT('',#222281); +#222281 = CARTESIAN_POINT('',(144.793497,-62.239318,1.585)); +#222282 = VERTEX_POINT('',#222283); +#222283 = CARTESIAN_POINT('',(145.261568,-62.244686,1.585)); +#222284 = CIRCLE('',#222285,0.397578964435); +#222285 = AXIS2_PLACEMENT_3D('',#222286,#222287,#222288); +#222286 = CARTESIAN_POINT('',(145.02384697212,-62.56336726061,1.585)); +#222287 = DIRECTION('',(0.,0.,-1.)); +#222288 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#222289 = ORIENTED_EDGE('',*,*,#222290,.T.); +#222290 = EDGE_CURVE('',#222282,#222291,#222293,.T.); +#222291 = VERTEX_POINT('',#222292); +#222292 = CARTESIAN_POINT('',(145.371884,-62.356008,1.585)); +#222293 = LINE('',#222294,#222295); +#222294 = CARTESIAN_POINT('',(145.261568,-62.244686,1.585)); +#222295 = VECTOR('',#222296,1.); +#222296 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#222297 = ORIENTED_EDGE('',*,*,#222298,.T.); +#222298 = EDGE_CURVE('',#222291,#222299,#222301,.T.); +#222299 = VERTEX_POINT('',#222300); +#222300 = CARTESIAN_POINT('',(145.382284,-62.379486,1.585)); +#222301 = LINE('',#222302,#222303); +#222302 = CARTESIAN_POINT('',(145.371884,-62.356008,1.585)); +#222303 = VECTOR('',#222304,1.); +#222304 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#222305 = ORIENTED_EDGE('',*,*,#222306,.T.); +#222306 = EDGE_CURVE('',#222299,#222307,#222309,.T.); +#222307 = VERTEX_POINT('',#222308); +#222308 = CARTESIAN_POINT('',(145.432142,-62.588152,1.585)); +#222309 = LINE('',#222310,#222311); +#222310 = CARTESIAN_POINT('',(145.382284,-62.379486,1.585)); +#222311 = VECTOR('',#222312,1.); +#222312 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#222313 = ORIENTED_EDGE('',*,*,#222314,.T.); +#222314 = EDGE_CURVE('',#222307,#222315,#222317,.T.); +#222315 = VERTEX_POINT('',#222316); +#222316 = CARTESIAN_POINT('',(145.429903,-62.939675,1.585)); +#222317 = LINE('',#222318,#222319); +#222318 = CARTESIAN_POINT('',(145.432142,-62.588152,1.585)); +#222319 = VECTOR('',#222320,1.); +#222320 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#222321 = ORIENTED_EDGE('',*,*,#222322,.T.); +#222322 = EDGE_CURVE('',#222315,#222323,#222325,.T.); +#222323 = VERTEX_POINT('',#222324); +#222324 = CARTESIAN_POINT('',(145.377337,-63.143997,1.585)); +#222325 = LINE('',#222326,#222327); +#222326 = CARTESIAN_POINT('',(145.429903,-62.939675,1.585)); +#222327 = VECTOR('',#222328,1.); +#222328 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#222329 = ORIENTED_EDGE('',*,*,#222330,.T.); +#222330 = EDGE_CURVE('',#222323,#222331,#222333,.T.); +#222331 = VERTEX_POINT('',#222332); +#222332 = CARTESIAN_POINT('',(145.362557,-63.164993,1.585)); +#222333 = LINE('',#222334,#222335); +#222334 = CARTESIAN_POINT('',(145.377337,-63.143997,1.585)); +#222335 = VECTOR('',#222336,1.); +#222336 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#222337 = ORIENTED_EDGE('',*,*,#222338,.T.); +#222338 = EDGE_CURVE('',#222331,#222339,#222341,.T.); +#222339 = VERTEX_POINT('',#222340); +#222340 = CARTESIAN_POINT('',(145.32035,-63.207199,1.585)); +#222341 = LINE('',#222342,#222343); +#222342 = CARTESIAN_POINT('',(145.362557,-63.164993,1.585)); +#222343 = VECTOR('',#222344,1.); +#222344 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#222345 = ORIENTED_EDGE('',*,*,#222346,.T.); +#222346 = EDGE_CURVE('',#222339,#222347,#222349,.T.); +#222347 = VERTEX_POINT('',#222348); +#222348 = CARTESIAN_POINT('',(145.35395,-63.240799,1.585)); +#222349 = LINE('',#222350,#222351); +#222350 = CARTESIAN_POINT('',(145.32035,-63.207199,1.585)); +#222351 = VECTOR('',#222352,1.); +#222352 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#222353 = ORIENTED_EDGE('',*,*,#222354,.T.); +#222354 = EDGE_CURVE('',#222347,#222355,#222357,.T.); +#222355 = VERTEX_POINT('',#222356); +#222356 = CARTESIAN_POINT('',(145.450745,-63.290807,1.585)); +#222357 = LINE('',#222358,#222359); +#222358 = CARTESIAN_POINT('',(145.35395,-63.240799,1.585)); +#222359 = VECTOR('',#222360,1.); +#222360 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#222361 = ORIENTED_EDGE('',*,*,#222362,.T.); +#222362 = EDGE_CURVE('',#222355,#222363,#222365,.T.); +#222363 = VERTEX_POINT('',#222364); +#222364 = CARTESIAN_POINT('',(145.37122,-63.417139,1.585)); +#222365 = CIRCLE('',#222366,7.500029440362E-02); +#222366 = AXIS2_PLACEMENT_3D('',#222367,#222368,#222369); +#222367 = CARTESIAN_POINT('',(145.40476105397,-63.35005664867,1.585)); +#222368 = DIRECTION('',(0.,0.,-1.)); +#222369 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#222370 = ORIENTED_EDGE('',*,*,#222371,.T.); +#222371 = EDGE_CURVE('',#222363,#222372,#222374,.T.); +#222372 = VERTEX_POINT('',#222373); +#222373 = CARTESIAN_POINT('',(145.26224,-63.360191,1.585)); +#222374 = LINE('',#222375,#222376); +#222375 = CARTESIAN_POINT('',(145.37122,-63.417139,1.585)); +#222376 = VECTOR('',#222377,1.); +#222377 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#222378 = ORIENTED_EDGE('',*,*,#222379,.T.); +#222379 = EDGE_CURVE('',#222372,#222380,#222382,.T.); +#222380 = VERTEX_POINT('',#222381); +#222381 = CARTESIAN_POINT('',(145.199476,-63.298457,1.585)); +#222382 = LINE('',#222383,#222384); +#222383 = CARTESIAN_POINT('',(145.26224,-63.360191,1.585)); +#222384 = VECTOR('',#222385,1.); +#222385 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#222386 = ORIENTED_EDGE('',*,*,#222387,.T.); +#222387 = EDGE_CURVE('',#222380,#222388,#222390,.T.); +#222388 = VERTEX_POINT('',#222389); +#222389 = CARTESIAN_POINT('',(145.133679,-63.328378,1.585)); +#222390 = LINE('',#222391,#222392); +#222391 = CARTESIAN_POINT('',(145.199476,-63.298457,1.585)); +#222392 = VECTOR('',#222393,1.); +#222393 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#222394 = ORIENTED_EDGE('',*,*,#222395,.T.); +#222395 = EDGE_CURVE('',#222388,#222396,#222398,.T.); +#222396 = VERTEX_POINT('',#222397); +#222397 = CARTESIAN_POINT('',(144.908761,-63.327156,1.585)); +#222398 = LINE('',#222399,#222400); +#222399 = CARTESIAN_POINT('',(145.133679,-63.328378,1.585)); +#222400 = VECTOR('',#222401,1.); +#222401 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#222402 = ORIENTED_EDGE('',*,*,#222403,.T.); +#222403 = EDGE_CURVE('',#222396,#222404,#222406,.T.); +#222404 = VERTEX_POINT('',#222405); +#222405 = CARTESIAN_POINT('',(144.78605,-63.264953,1.585)); +#222406 = LINE('',#222407,#222408); +#222407 = CARTESIAN_POINT('',(144.908761,-63.327156,1.585)); +#222408 = VECTOR('',#222409,1.); +#222409 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#222410 = ORIENTED_EDGE('',*,*,#222411,.T.); +#222411 = EDGE_CURVE('',#222404,#222412,#222414,.T.); +#222412 = VERTEX_POINT('',#222413); +#222413 = CARTESIAN_POINT('',(144.675734,-63.153628,1.585)); +#222414 = LINE('',#222415,#222416); +#222415 = CARTESIAN_POINT('',(144.78605,-63.264953,1.585)); +#222416 = VECTOR('',#222417,1.); +#222417 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#222418 = ORIENTED_EDGE('',*,*,#222419,.T.); +#222419 = EDGE_CURVE('',#222412,#222420,#222422,.T.); +#222420 = VERTEX_POINT('',#222421); +#222421 = CARTESIAN_POINT('',(144.665334,-63.130151,1.585)); +#222422 = LINE('',#222423,#222424); +#222423 = CARTESIAN_POINT('',(144.675734,-63.153628,1.585)); +#222424 = VECTOR('',#222425,1.); +#222425 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#222426 = ORIENTED_EDGE('',*,*,#222427,.T.); +#222427 = EDGE_CURVE('',#222420,#222428,#222430,.T.); +#222428 = VERTEX_POINT('',#222429); +#222429 = CARTESIAN_POINT('',(144.615476,-62.921485,1.585)); +#222430 = LINE('',#222431,#222432); +#222431 = CARTESIAN_POINT('',(144.665334,-63.130151,1.585)); +#222432 = VECTOR('',#222433,1.); +#222433 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#222434 = ORIENTED_EDGE('',*,*,#222435,.T.); +#222435 = EDGE_CURVE('',#222428,#222436,#222438,.T.); +#222436 = VERTEX_POINT('',#222437); +#222437 = CARTESIAN_POINT('',(144.617715,-62.569962,1.585)); +#222438 = LINE('',#222439,#222440); +#222439 = CARTESIAN_POINT('',(144.615476,-62.921485,1.585)); +#222440 = VECTOR('',#222441,1.); +#222441 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#222442 = ORIENTED_EDGE('',*,*,#222443,.T.); +#222443 = EDGE_CURVE('',#222436,#222444,#222446,.T.); +#222444 = VERTEX_POINT('',#222445); +#222445 = CARTESIAN_POINT('',(144.670281,-62.36564,1.585)); +#222446 = LINE('',#222447,#222448); +#222447 = CARTESIAN_POINT('',(144.617715,-62.569962,1.585)); +#222448 = VECTOR('',#222449,1.); +#222449 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#222450 = ORIENTED_EDGE('',*,*,#222451,.T.); +#222451 = EDGE_CURVE('',#222444,#222452,#222454,.T.); +#222452 = VERTEX_POINT('',#222453); +#222453 = CARTESIAN_POINT('',(144.685062,-62.344643,1.585)); +#222454 = LINE('',#222455,#222456); +#222455 = CARTESIAN_POINT('',(144.670281,-62.36564,1.585)); +#222456 = VECTOR('',#222457,1.); +#222457 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#222458 = ORIENTED_EDGE('',*,*,#222459,.T.); +#222459 = EDGE_CURVE('',#222452,#222280,#222460,.T.); +#222460 = LINE('',#222461,#222462); +#222461 = CARTESIAN_POINT('',(144.685062,-62.344643,1.585)); +#222462 = VECTOR('',#222463,1.); +#222463 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#222464 = FACE_BOUND('',#222465,.F.); +#222465 = EDGE_LOOP('',(#222466,#222477,#222485,#222494,#222502,#222510, + #222518,#222526,#222534,#222542,#222551,#222559,#222567,#222575, + #222583,#222592)); +#222466 = ORIENTED_EDGE('',*,*,#222467,.T.); +#222467 = EDGE_CURVE('',#222468,#222470,#222472,.T.); +#222468 = VERTEX_POINT('',#222469); +#222469 = CARTESIAN_POINT('',(145.169858,-62.364077,1.585)); +#222470 = VERTEX_POINT('',#222471); +#222471 = CARTESIAN_POINT('',(144.87776,-62.364077,1.585)); +#222472 = CIRCLE('',#222473,0.252889603602); +#222473 = AXIS2_PLACEMENT_3D('',#222474,#222475,#222476); +#222474 = CARTESIAN_POINT('',(145.023809,-62.57053,1.585)); +#222475 = DIRECTION('',(0.,0.,1.)); +#222476 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#222477 = ORIENTED_EDGE('',*,*,#222478,.T.); +#222478 = EDGE_CURVE('',#222470,#222479,#222481,.T.); +#222479 = VERTEX_POINT('',#222480); +#222480 = CARTESIAN_POINT('',(144.805817,-62.436019,1.585)); +#222481 = LINE('',#222482,#222483); +#222482 = CARTESIAN_POINT('',(144.87776,-62.364077,1.585)); +#222483 = VECTOR('',#222484,1.); +#222484 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#222485 = ORIENTED_EDGE('',*,*,#222486,.T.); +#222486 = EDGE_CURVE('',#222479,#222487,#222489,.T.); +#222487 = VERTEX_POINT('',#222488); +#222488 = CARTESIAN_POINT('',(144.805817,-63.073617,1.585)); +#222489 = CIRCLE('',#222490,0.985308713638); +#222490 = AXIS2_PLACEMENT_3D('',#222491,#222492,#222493); +#222491 = CARTESIAN_POINT('',(145.7381262077,-62.754818,1.585)); +#222492 = DIRECTION('',(0.,0.,1.)); +#222493 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#222494 = ORIENTED_EDGE('',*,*,#222495,.T.); +#222495 = EDGE_CURVE('',#222487,#222496,#222498,.T.); +#222496 = VERTEX_POINT('',#222497); +#222497 = CARTESIAN_POINT('',(144.87776,-63.145561,1.585)); +#222498 = LINE('',#222499,#222500); +#222499 = CARTESIAN_POINT('',(144.805817,-63.073617,1.585)); +#222500 = VECTOR('',#222501,1.); +#222501 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#222502 = ORIENTED_EDGE('',*,*,#222503,.T.); +#222503 = EDGE_CURVE('',#222496,#222504,#222506,.T.); +#222504 = VERTEX_POINT('',#222505); +#222505 = CARTESIAN_POINT('',(144.946276,-63.179819,1.585)); +#222506 = LINE('',#222507,#222508); +#222507 = CARTESIAN_POINT('',(144.87776,-63.145561,1.585)); +#222508 = VECTOR('',#222509,1.); +#222509 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#222510 = ORIENTED_EDGE('',*,*,#222511,.T.); +#222511 = EDGE_CURVE('',#222504,#222512,#222514,.T.); +#222512 = VERTEX_POINT('',#222513); +#222513 = CARTESIAN_POINT('',(145.080839,-63.179819,1.585)); +#222514 = LINE('',#222515,#222516); +#222515 = CARTESIAN_POINT('',(144.946276,-63.179819,1.585)); +#222516 = VECTOR('',#222517,1.); +#222517 = DIRECTION('',(1.,0.,0.)); +#222518 = ORIENTED_EDGE('',*,*,#222519,.T.); +#222519 = EDGE_CURVE('',#222512,#222520,#222522,.T.); +#222520 = VERTEX_POINT('',#222521); +#222521 = CARTESIAN_POINT('',(145.027,-63.12598,1.585)); +#222522 = LINE('',#222523,#222524); +#222523 = CARTESIAN_POINT('',(145.080839,-63.179819,1.585)); +#222524 = VECTOR('',#222525,1.); +#222525 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#222526 = ORIENTED_EDGE('',*,*,#222527,.T.); +#222527 = EDGE_CURVE('',#222520,#222528,#222530,.T.); +#222528 = VERTEX_POINT('',#222529); +#222529 = CARTESIAN_POINT('',(144.958485,-63.091723,1.585)); +#222530 = LINE('',#222531,#222532); +#222531 = CARTESIAN_POINT('',(145.027,-63.12598,1.585)); +#222532 = VECTOR('',#222533,1.); +#222533 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#222534 = ORIENTED_EDGE('',*,*,#222535,.T.); +#222535 = EDGE_CURVE('',#222528,#222536,#222538,.T.); +#222536 = VERTEX_POINT('',#222537); +#222537 = CARTESIAN_POINT('',(144.86632,-63.090282,1.585)); +#222538 = LINE('',#222539,#222540); +#222539 = CARTESIAN_POINT('',(144.958485,-63.091723,1.585)); +#222540 = VECTOR('',#222541,1.); +#222541 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#222542 = ORIENTED_EDGE('',*,*,#222543,.T.); +#222543 = EDGE_CURVE('',#222536,#222544,#222546,.T.); +#222544 = VERTEX_POINT('',#222545); +#222545 = CARTESIAN_POINT('',(144.880952,-62.941723,1.585)); +#222546 = CIRCLE('',#222547,7.500006711464E-02); +#222547 = AXIS2_PLACEMENT_3D('',#222548,#222549,#222550); +#222548 = CARTESIAN_POINT('',(144.88095193288,-63.01672306711,1.585)); +#222549 = DIRECTION('',(0.,0.,-1.)); +#222550 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#222551 = ORIENTED_EDGE('',*,*,#222552,.T.); +#222552 = EDGE_CURVE('',#222544,#222553,#222555,.T.); +#222553 = VERTEX_POINT('',#222554); +#222554 = CARTESIAN_POINT('',(144.995999,-62.944386,1.585)); +#222555 = LINE('',#222556,#222557); +#222556 = CARTESIAN_POINT('',(144.880952,-62.941723,1.585)); +#222557 = VECTOR('',#222558,1.); +#222558 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#222559 = ORIENTED_EDGE('',*,*,#222560,.T.); +#222560 = EDGE_CURVE('',#222553,#222561,#222563,.T.); +#222561 = VERTEX_POINT('',#222562); +#222562 = CARTESIAN_POINT('',(145.118711,-63.00659,1.585)); +#222563 = LINE('',#222564,#222565); +#222564 = CARTESIAN_POINT('',(144.995999,-62.944386,1.585)); +#222565 = VECTOR('',#222566,1.); +#222566 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#222567 = ORIENTED_EDGE('',*,*,#222568,.T.); +#222568 = EDGE_CURVE('',#222561,#222569,#222571,.T.); +#222569 = VERTEX_POINT('',#222570); +#222570 = CARTESIAN_POINT('',(145.214284,-63.101133,1.585)); +#222571 = LINE('',#222572,#222573); +#222572 = CARTESIAN_POINT('',(145.118711,-63.00659,1.585)); +#222573 = VECTOR('',#222574,1.); +#222574 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#222575 = ORIENTED_EDGE('',*,*,#222576,.T.); +#222576 = EDGE_CURVE('',#222569,#222577,#222579,.T.); +#222577 = VERTEX_POINT('',#222578); +#222578 = CARTESIAN_POINT('',(145.2418,-63.073617,1.585)); +#222579 = LINE('',#222580,#222581); +#222580 = CARTESIAN_POINT('',(145.214284,-63.101133,1.585)); +#222581 = VECTOR('',#222582,1.); +#222582 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#222583 = ORIENTED_EDGE('',*,*,#222584,.T.); +#222584 = EDGE_CURVE('',#222577,#222585,#222587,.T.); +#222585 = VERTEX_POINT('',#222586); +#222586 = CARTESIAN_POINT('',(145.2418,-62.436019,1.585)); +#222587 = CIRCLE('',#222588,0.985282207897); +#222588 = AXIS2_PLACEMENT_3D('',#222589,#222590,#222591); +#222589 = CARTESIAN_POINT('',(144.30951880486,-62.754818,1.585)); +#222590 = DIRECTION('',(0.,-0.,1.)); +#222591 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#222592 = ORIENTED_EDGE('',*,*,#222593,.T.); +#222593 = EDGE_CURVE('',#222585,#222468,#222594,.T.); +#222594 = LINE('',#222595,#222596); +#222595 = CARTESIAN_POINT('',(145.2418,-62.436019,1.585)); +#222596 = VECTOR('',#222597,1.); +#222597 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#222598 = PLANE('',#222599); +#222599 = AXIS2_PLACEMENT_3D('',#222600,#222601,#222602); +#222600 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222601 = DIRECTION('',(0.,0.,1.)); +#222602 = DIRECTION('',(1.,0.,-0.)); +#222603 = SHELL_BASED_SURFACE_MODEL('',(#222604)); +#222604 = OPEN_SHELL('',(#222605)); +#222605 = ADVANCED_FACE('',(#222606),#222666,.T.); +#222606 = FACE_BOUND('',#222607,.F.); +#222607 = EDGE_LOOP('',(#222608,#222619,#222627,#222635,#222643,#222651, + #222660)); +#222608 = ORIENTED_EDGE('',*,*,#222609,.T.); +#222609 = EDGE_CURVE('',#222610,#222612,#222614,.T.); +#222610 = VERTEX_POINT('',#222611); +#222611 = CARTESIAN_POINT('',(181.65165,-63.3331,1.585)); +#222612 = VERTEX_POINT('',#222613); +#222613 = CARTESIAN_POINT('',(181.603126,-63.23781,1.585)); +#222614 = CIRCLE('',#222615,6.000027696175E-02); +#222615 = AXIS2_PLACEMENT_3D('',#222616,#222617,#222618); +#222616 = CARTESIAN_POINT('',(181.65165092846,-63.27309972304,1.585)); +#222617 = DIRECTION('',(0.,0.,-1.)); +#222618 = DIRECTION('',(-1.547440206489E-05,-0.99999999988,-0.)); +#222619 = ORIENTED_EDGE('',*,*,#222620,.T.); +#222620 = EDGE_CURVE('',#222612,#222621,#222623,.T.); +#222621 = VERTEX_POINT('',#222622); +#222622 = CARTESIAN_POINT('',(181.843126,-62.90781,1.585)); +#222623 = LINE('',#222624,#222625); +#222624 = CARTESIAN_POINT('',(181.603126,-63.23781,1.585)); +#222625 = VECTOR('',#222626,1.); +#222626 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#222627 = ORIENTED_EDGE('',*,*,#222628,.T.); +#222628 = EDGE_CURVE('',#222621,#222629,#222631,.T.); +#222629 = VERTEX_POINT('',#222630); +#222630 = CARTESIAN_POINT('',(181.882292,-62.883834,1.585)); +#222631 = LINE('',#222632,#222633); +#222632 = CARTESIAN_POINT('',(181.843126,-62.90781,1.585)); +#222633 = VECTOR('',#222634,1.); +#222634 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#222635 = ORIENTED_EDGE('',*,*,#222636,.T.); +#222636 = EDGE_CURVE('',#222629,#222637,#222639,.T.); +#222637 = VERTEX_POINT('',#222638); +#222638 = CARTESIAN_POINT('',(181.92694,-62.894576,1.585)); +#222639 = LINE('',#222640,#222641); +#222640 = CARTESIAN_POINT('',(181.882292,-62.883834,1.585)); +#222641 = VECTOR('',#222642,1.); +#222642 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#222643 = ORIENTED_EDGE('',*,*,#222644,.T.); +#222644 = EDGE_CURVE('',#222637,#222645,#222647,.T.); +#222645 = VERTEX_POINT('',#222646); +#222646 = CARTESIAN_POINT('',(182.180174,-63.23781,1.585)); +#222647 = LINE('',#222648,#222649); +#222648 = CARTESIAN_POINT('',(181.92694,-62.894576,1.585)); +#222649 = VECTOR('',#222650,1.); +#222650 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#222651 = ORIENTED_EDGE('',*,*,#222652,.T.); +#222652 = EDGE_CURVE('',#222645,#222653,#222655,.T.); +#222653 = VERTEX_POINT('',#222654); +#222654 = CARTESIAN_POINT('',(182.13165,-63.3331,1.585)); +#222655 = CIRCLE('',#222656,5.999941814204E-02); +#222656 = AXIS2_PLACEMENT_3D('',#222657,#222658,#222659); +#222657 = CARTESIAN_POINT('',(182.13165075805,-63.27310058186,1.585)); +#222658 = DIRECTION('',(0.,0.,-1.)); +#222659 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#222660 = ORIENTED_EDGE('',*,*,#222661,.T.); +#222661 = EDGE_CURVE('',#222653,#222610,#222662,.T.); +#222662 = LINE('',#222663,#222664); +#222663 = CARTESIAN_POINT('',(182.13165,-63.3331,1.585)); +#222664 = VECTOR('',#222665,1.); +#222665 = DIRECTION('',(-1.,0.,0.)); +#222666 = PLANE('',#222667); +#222667 = AXIS2_PLACEMENT_3D('',#222668,#222669,#222670); +#222668 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222669 = DIRECTION('',(0.,0.,1.)); +#222670 = DIRECTION('',(1.,0.,-0.)); +#222671 = SHELL_BASED_SURFACE_MODEL('',(#222672)); +#222672 = OPEN_SHELL('',(#222673)); +#222673 = ADVANCED_FACE('',(#222674),#222869,.T.); +#222674 = FACE_BOUND('',#222675,.F.); +#222675 = EDGE_LOOP('',(#222676,#222687,#222695,#222704,#222712,#222720, + #222728,#222736,#222745,#222753,#222762,#222770,#222778,#222786, + #222795,#222803,#222812,#222820,#222829,#222837,#222846,#222854, + #222863)); +#222676 = ORIENTED_EDGE('',*,*,#222677,.T.); +#222677 = EDGE_CURVE('',#222678,#222680,#222682,.T.); +#222678 = VERTEX_POINT('',#222679); +#222679 = CARTESIAN_POINT('',(145.713976,-62.23294,1.585)); +#222680 = VERTEX_POINT('',#222681); +#222681 = CARTESIAN_POINT('',(145.785714,-62.179819,1.585)); +#222682 = CIRCLE('',#222683,7.500336100772E-02); +#222683 = AXIS2_PLACEMENT_3D('',#222684,#222685,#222686); +#222684 = CARTESIAN_POINT('',(145.7857162707,-62.25482236097,1.585)); +#222685 = DIRECTION('',(0.,0.,-1.)); +#222686 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#222687 = ORIENTED_EDGE('',*,*,#222688,.T.); +#222688 = EDGE_CURVE('',#222680,#222689,#222691,.T.); +#222689 = VERTEX_POINT('',#222690); +#222690 = CARTESIAN_POINT('',(146.276536,-62.18126,1.585)); +#222691 = LINE('',#222692,#222693); +#222692 = CARTESIAN_POINT('',(145.785714,-62.179819,1.585)); +#222693 = VECTOR('',#222694,1.); +#222694 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#222695 = ORIENTED_EDGE('',*,*,#222696,.T.); +#222696 = EDGE_CURVE('',#222689,#222697,#222699,.T.); +#222697 = VERTEX_POINT('',#222698); +#222698 = CARTESIAN_POINT('',(146.261904,-62.329819,1.585)); +#222699 = CIRCLE('',#222700,7.500006711465E-02); +#222700 = AXIS2_PLACEMENT_3D('',#222701,#222702,#222703); +#222701 = CARTESIAN_POINT('',(146.26190406711,-62.25481893288,1.585)); +#222702 = DIRECTION('',(0.,0.,-1.)); +#222703 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#222704 = ORIENTED_EDGE('',*,*,#222705,.T.); +#222705 = EDGE_CURVE('',#222697,#222706,#222708,.T.); +#222706 = VERTEX_POINT('',#222707); +#222707 = CARTESIAN_POINT('',(145.853588,-62.329819,1.585)); +#222708 = LINE('',#222709,#222710); +#222709 = CARTESIAN_POINT('',(146.261904,-62.329819,1.585)); +#222710 = VECTOR('',#222711,1.); +#222711 = DIRECTION('',(-1.,0.,0.)); +#222712 = ORIENTED_EDGE('',*,*,#222713,.T.); +#222713 = EDGE_CURVE('',#222706,#222714,#222716,.T.); +#222714 = VERTEX_POINT('',#222715); +#222715 = CARTESIAN_POINT('',(145.828769,-62.578009,1.585)); +#222716 = LINE('',#222717,#222718); +#222717 = CARTESIAN_POINT('',(145.853588,-62.329819,1.585)); +#222718 = VECTOR('',#222719,1.); +#222719 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#222720 = ORIENTED_EDGE('',*,*,#222721,.T.); +#222721 = EDGE_CURVE('',#222714,#222722,#222724,.T.); +#222722 = VERTEX_POINT('',#222723); +#222723 = CARTESIAN_POINT('',(145.86632,-62.562212,1.585)); +#222724 = LINE('',#222725,#222726); +#222725 = CARTESIAN_POINT('',(145.828769,-62.578009,1.585)); +#222726 = VECTOR('',#222727,1.); +#222727 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#222728 = ORIENTED_EDGE('',*,*,#222729,.T.); +#222729 = EDGE_CURVE('',#222722,#222730,#222732,.T.); +#222730 = VERTEX_POINT('',#222731); +#222731 = CARTESIAN_POINT('',(146.138856,-62.563434,1.585)); +#222732 = LINE('',#222733,#222734); +#222733 = CARTESIAN_POINT('',(145.86632,-62.562212,1.585)); +#222734 = VECTOR('',#222735,1.); +#222735 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#222736 = ORIENTED_EDGE('',*,*,#222737,.T.); +#222737 = EDGE_CURVE('',#222730,#222738,#222740,.T.); +#222738 = VERTEX_POINT('',#222739); +#222739 = CARTESIAN_POINT('',(146.383082,-62.811615,1.585)); +#222740 = CIRCLE('',#222741,0.348625649748); +#222741 = AXIS2_PLACEMENT_3D('',#222742,#222743,#222744); +#222742 = CARTESIAN_POINT('',(146.04568404586,-62.89937868387,1.585)); +#222743 = DIRECTION('',(0.,0.,-1.)); +#222744 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#222745 = ORIENTED_EDGE('',*,*,#222746,.T.); +#222746 = EDGE_CURVE('',#222738,#222747,#222749,.T.); +#222747 = VERTEX_POINT('',#222748); +#222748 = CARTESIAN_POINT('',(146.38186,-63.084152,1.585)); +#222749 = LINE('',#222750,#222751); +#222750 = CARTESIAN_POINT('',(146.383082,-62.811615,1.585)); +#222751 = VECTOR('',#222752,1.); +#222752 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#222753 = ORIENTED_EDGE('',*,*,#222754,.T.); +#222754 = EDGE_CURVE('',#222747,#222755,#222757,.T.); +#222755 = VERTEX_POINT('',#222756); +#222756 = CARTESIAN_POINT('',(146.133679,-63.328378,1.585)); +#222757 = CIRCLE('',#222758,0.348635327447); +#222758 = AXIS2_PLACEMENT_3D('',#222759,#222760,#222761); +#222759 = CARTESIAN_POINT('',(146.04590748129,-62.99097208415,1.585)); +#222760 = DIRECTION('',(0.,0.,-1.)); +#222761 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#222762 = ORIENTED_EDGE('',*,*,#222763,.T.); +#222763 = EDGE_CURVE('',#222755,#222764,#222766,.T.); +#222764 = VERTEX_POINT('',#222765); +#222765 = CARTESIAN_POINT('',(145.861142,-63.327156,1.585)); +#222766 = LINE('',#222767,#222768); +#222767 = CARTESIAN_POINT('',(146.133679,-63.328378,1.585)); +#222768 = VECTOR('',#222769,1.); +#222769 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#222770 = ORIENTED_EDGE('',*,*,#222771,.T.); +#222771 = EDGE_CURVE('',#222764,#222772,#222774,.T.); +#222772 = VERTEX_POINT('',#222773); +#222773 = CARTESIAN_POINT('',(145.738429,-63.26495,1.585)); +#222774 = LINE('',#222775,#222776); +#222775 = CARTESIAN_POINT('',(145.861142,-63.327156,1.585)); +#222776 = VECTOR('',#222777,1.); +#222777 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#222778 = ORIENTED_EDGE('',*,*,#222779,.T.); +#222779 = EDGE_CURVE('',#222772,#222780,#222782,.T.); +#222780 = VERTEX_POINT('',#222781); +#222781 = CARTESIAN_POINT('',(145.675734,-63.201247,1.585)); +#222782 = LINE('',#222783,#222784); +#222783 = CARTESIAN_POINT('',(145.738429,-63.26495,1.585)); +#222784 = VECTOR('',#222785,1.); +#222785 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#222786 = ORIENTED_EDGE('',*,*,#222787,.T.); +#222787 = EDGE_CURVE('',#222780,#222788,#222790,.T.); +#222788 = VERTEX_POINT('',#222789); +#222789 = CARTESIAN_POINT('',(145.791129,-63.106548,1.585)); +#222790 = CIRCLE('',#222791,7.50001266804E-02); +#222791 = AXIS2_PLACEMENT_3D('',#222792,#222793,#222794); +#222792 = CARTESIAN_POINT('',(145.73809505199,-63.15958024831,1.585)); +#222793 = DIRECTION('',(0.,0.,-1.)); +#222794 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#222795 = ORIENTED_EDGE('',*,*,#222796,.T.); +#222796 = EDGE_CURVE('',#222788,#222797,#222799,.T.); +#222797 = VERTEX_POINT('',#222798); +#222798 = CARTESIAN_POINT('',(145.830141,-63.145561,1.585)); +#222799 = LINE('',#222800,#222801); +#222800 = CARTESIAN_POINT('',(145.791129,-63.106548,1.585)); +#222801 = VECTOR('',#222802,1.); +#222802 = DIRECTION('',(0.707097718561,-0.707115843696,0.)); +#222803 = ORIENTED_EDGE('',*,*,#222804,.T.); +#222804 = EDGE_CURVE('',#222797,#222805,#222807,.T.); +#222805 = VERTEX_POINT('',#222806); +#222806 = CARTESIAN_POINT('',(146.169857,-63.145561,1.585)); +#222807 = CIRCLE('',#222808,0.305620374329); +#222808 = AXIS2_PLACEMENT_3D('',#222809,#222810,#222811); +#222809 = CARTESIAN_POINT('',(145.999999,-62.89149,1.585)); +#222810 = DIRECTION('',(0.,0.,1.)); +#222811 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#222812 = ORIENTED_EDGE('',*,*,#222813,.T.); +#222813 = EDGE_CURVE('',#222805,#222814,#222816,.T.); +#222814 = VERTEX_POINT('',#222815); +#222815 = CARTESIAN_POINT('',(146.200264,-63.115153,1.585)); +#222816 = LINE('',#222817,#222818); +#222817 = CARTESIAN_POINT('',(146.169857,-63.145561,1.585)); +#222818 = VECTOR('',#222819,1.); +#222819 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#222820 = ORIENTED_EDGE('',*,*,#222821,.T.); +#222821 = EDGE_CURVE('',#222814,#222822,#222824,.T.); +#222822 = VERTEX_POINT('',#222823); +#222823 = CARTESIAN_POINT('',(146.200265,-62.775436,1.585)); +#222824 = CIRCLE('',#222825,0.305616146029); +#222825 = AXIS2_PLACEMENT_3D('',#222826,#222827,#222828); +#222826 = CARTESIAN_POINT('',(145.94619892049,-62.94529375212,1.585)); +#222827 = DIRECTION('',(0.,-0.,1.)); +#222828 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#222829 = ORIENTED_EDGE('',*,*,#222830,.T.); +#222830 = EDGE_CURVE('',#222822,#222831,#222833,.T.); +#222831 = VERTEX_POINT('',#222832); +#222832 = CARTESIAN_POINT('',(146.169858,-62.745029,1.585)); +#222833 = LINE('',#222834,#222835); +#222834 = CARTESIAN_POINT('',(146.200265,-62.775436,1.585)); +#222835 = VECTOR('',#222836,1.); +#222836 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#222837 = ORIENTED_EDGE('',*,*,#222838,.T.); +#222838 = EDGE_CURVE('',#222831,#222839,#222841,.T.); +#222839 = VERTEX_POINT('',#222840); +#222840 = CARTESIAN_POINT('',(145.830141,-62.745029,1.585)); +#222841 = CIRCLE('',#222842,0.305621483548); +#222842 = AXIS2_PLACEMENT_3D('',#222843,#222844,#222845); +#222843 = CARTESIAN_POINT('',(145.9999995,-62.999101,1.585)); +#222844 = DIRECTION('',(0.,0.,1.)); +#222845 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#222846 = ORIENTED_EDGE('',*,*,#222847,.T.); +#222847 = EDGE_CURVE('',#222839,#222848,#222850,.T.); +#222848 = VERTEX_POINT('',#222849); +#222849 = CARTESIAN_POINT('',(145.773351,-62.797206,1.585)); +#222850 = LINE('',#222851,#222852); +#222851 = CARTESIAN_POINT('',(145.830141,-62.745029,1.585)); +#222852 = VECTOR('',#222853,1.); +#222853 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#222854 = ORIENTED_EDGE('',*,*,#222855,.T.); +#222855 = EDGE_CURVE('',#222848,#222856,#222858,.T.); +#222856 = VERTEX_POINT('',#222857); +#222857 = CARTESIAN_POINT('',(145.663445,-62.738249,1.585)); +#222858 = CIRCLE('',#222859,7.500024172471E-02); +#222859 = AXIS2_PLACEMENT_3D('',#222860,#222861,#222862); +#222860 = CARTESIAN_POINT('',(145.73809497002,-62.73100895619,1.585)); +#222861 = DIRECTION('',(-0.,0.,-1.)); +#222862 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#222863 = ORIENTED_EDGE('',*,*,#222864,.T.); +#222864 = EDGE_CURVE('',#222856,#222678,#222865,.T.); +#222865 = LINE('',#222866,#222867); +#222866 = CARTESIAN_POINT('',(145.663445,-62.738249,1.585)); +#222867 = VECTOR('',#222868,1.); +#222868 = DIRECTION('',(9.950391398791E-02,0.995037170713,0.)); +#222869 = PLANE('',#222870); +#222870 = AXIS2_PLACEMENT_3D('',#222871,#222872,#222873); +#222871 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222872 = DIRECTION('',(0.,0.,1.)); +#222873 = DIRECTION('',(1.,0.,-0.)); +#222874 = SHELL_BASED_SURFACE_MODEL('',(#222875)); +#222875 = OPEN_SHELL('',(#222876)); +#222876 = ADVANCED_FACE('',(#222877),#222971,.T.); +#222877 = FACE_BOUND('',#222878,.F.); +#222878 = EDGE_LOOP('',(#222879,#222890,#222898,#222907,#222915,#222924, + #222932,#222941,#222949,#222957,#222965)); +#222879 = ORIENTED_EDGE('',*,*,#222880,.T.); +#222880 = EDGE_CURVE('',#222881,#222883,#222885,.T.); +#222881 = VERTEX_POINT('',#222882); +#222882 = CARTESIAN_POINT('',(99.896217,-61.860139,1.585)); +#222883 = VERTEX_POINT('',#222884); +#222884 = CARTESIAN_POINT('',(100.01165,-61.8831,1.585)); +#222885 = CIRCLE('',#222886,6.000007318648E-02); +#222886 = AXIS2_PLACEMENT_3D('',#222887,#222888,#222889); +#222887 = CARTESIAN_POINT('',(99.951649926814,-61.88309982331,1.585)); +#222888 = DIRECTION('',(0.,0.,-1.)); +#222889 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#222890 = ORIENTED_EDGE('',*,*,#222891,.T.); +#222891 = EDGE_CURVE('',#222883,#222892,#222894,.T.); +#222892 = VERTEX_POINT('',#222893); +#222893 = CARTESIAN_POINT('',(100.01165,-62.8831,1.585)); +#222894 = LINE('',#222895,#222896); +#222895 = CARTESIAN_POINT('',(100.01165,-61.8831,1.585)); +#222896 = VECTOR('',#222897,1.); +#222897 = DIRECTION('',(0.,-1.,0.)); +#222898 = ORIENTED_EDGE('',*,*,#222899,.T.); +#222899 = EDGE_CURVE('',#222892,#222900,#222902,.T.); +#222900 = VERTEX_POINT('',#222901); +#222901 = CARTESIAN_POINT('',(99.95165,-62.9431,1.585)); +#222902 = CIRCLE('',#222903,5.999932016262E-02); +#222903 = AXIS2_PLACEMENT_3D('',#222904,#222905,#222906); +#222904 = CARTESIAN_POINT('',(99.951650679841,-62.88310067984,1.585)); +#222905 = DIRECTION('',(0.,0.,-1.)); +#222906 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#222907 = ORIENTED_EDGE('',*,*,#222908,.T.); +#222908 = EDGE_CURVE('',#222900,#222909,#222911,.T.); +#222909 = VERTEX_POINT('',#222910); +#222910 = CARTESIAN_POINT('',(98.43165,-62.9431,1.585)); +#222911 = LINE('',#222912,#222913); +#222912 = CARTESIAN_POINT('',(99.95165,-62.9431,1.585)); +#222913 = VECTOR('',#222914,1.); +#222914 = DIRECTION('',(-1.,0.,0.)); +#222915 = ORIENTED_EDGE('',*,*,#222916,.T.); +#222916 = EDGE_CURVE('',#222909,#222917,#222919,.T.); +#222917 = VERTEX_POINT('',#222918); +#222918 = CARTESIAN_POINT('',(98.37165,-62.8831,1.585)); +#222919 = CIRCLE('',#222920,5.999932016259E-02); +#222920 = AXIS2_PLACEMENT_3D('',#222921,#222922,#222923); +#222921 = CARTESIAN_POINT('',(98.431649320159,-62.88310067984,1.585)); +#222922 = DIRECTION('',(0.,0.,-1.)); +#222923 = DIRECTION('',(1.133081612142E-05,-0.999999999936,0.)); +#222924 = ORIENTED_EDGE('',*,*,#222925,.T.); +#222925 = EDGE_CURVE('',#222917,#222926,#222928,.T.); +#222926 = VERTEX_POINT('',#222927); +#222927 = CARTESIAN_POINT('',(98.37165,-62.8331,1.585)); +#222928 = LINE('',#222929,#222930); +#222929 = CARTESIAN_POINT('',(98.37165,-62.8831,1.585)); +#222930 = VECTOR('',#222931,1.); +#222931 = DIRECTION('',(0.,1.,0.)); +#222932 = ORIENTED_EDGE('',*,*,#222933,.T.); +#222933 = EDGE_CURVE('',#222926,#222934,#222936,.T.); +#222934 = VERTEX_POINT('',#222935); +#222935 = CARTESIAN_POINT('',(98.487083,-62.810139,1.585)); +#222936 = CIRCLE('',#222937,6.000007318647E-02); +#222937 = AXIS2_PLACEMENT_3D('',#222938,#222939,#222940); +#222938 = CARTESIAN_POINT('',(98.431650073186,-62.83309982331,1.585)); +#222939 = DIRECTION('',(0.,0.,-1.)); +#222940 = DIRECTION('',(-0.999999999996,-2.944769366859E-06,-0.)); +#222941 = ORIENTED_EDGE('',*,*,#222942,.T.); +#222942 = EDGE_CURVE('',#222934,#222943,#222945,.T.); +#222943 = VERTEX_POINT('',#222944); +#222944 = CARTESIAN_POINT('',(98.489661,-62.8231,1.585)); +#222945 = LINE('',#222946,#222947); +#222946 = CARTESIAN_POINT('',(98.487083,-62.810139,1.585)); +#222947 = VECTOR('',#222948,1.); +#222948 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#222949 = ORIENTED_EDGE('',*,*,#222950,.T.); +#222950 = EDGE_CURVE('',#222943,#222951,#222953,.T.); +#222951 = VERTEX_POINT('',#222952); +#222952 = CARTESIAN_POINT('',(99.89165,-62.8231,1.585)); +#222953 = LINE('',#222954,#222955); +#222954 = CARTESIAN_POINT('',(98.489661,-62.8231,1.585)); +#222955 = VECTOR('',#222956,1.); +#222956 = DIRECTION('',(1.,0.,0.)); +#222957 = ORIENTED_EDGE('',*,*,#222958,.T.); +#222958 = EDGE_CURVE('',#222951,#222959,#222961,.T.); +#222959 = VERTEX_POINT('',#222960); +#222960 = CARTESIAN_POINT('',(99.89165,-61.8831,1.585)); +#222961 = LINE('',#222962,#222963); +#222962 = CARTESIAN_POINT('',(99.89165,-62.8231,1.585)); +#222963 = VECTOR('',#222964,1.); +#222964 = DIRECTION('',(0.,1.,0.)); +#222965 = ORIENTED_EDGE('',*,*,#222966,.T.); +#222966 = EDGE_CURVE('',#222959,#222881,#222967,.T.); +#222967 = LINE('',#222968,#222969); +#222968 = CARTESIAN_POINT('',(99.89165,-61.8831,1.585)); +#222969 = VECTOR('',#222970,1.); +#222970 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#222971 = PLANE('',#222972); +#222972 = AXIS2_PLACEMENT_3D('',#222973,#222974,#222975); +#222973 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222974 = DIRECTION('',(0.,0.,1.)); +#222975 = DIRECTION('',(1.,0.,-0.)); +#222976 = SHELL_BASED_SURFACE_MODEL('',(#222977)); +#222977 = OPEN_SHELL('',(#222978)); +#222978 = ADVANCED_FACE('',(#222979),#223065,.T.); +#222979 = FACE_BOUND('',#222980,.F.); +#222980 = EDGE_LOOP('',(#222981,#222992,#223000,#223009,#223017,#223026, + #223034,#223043,#223051,#223059)); +#222981 = ORIENTED_EDGE('',*,*,#222982,.T.); +#222982 = EDGE_CURVE('',#222983,#222985,#222987,.T.); +#222983 = VERTEX_POINT('',#222984); +#222984 = CARTESIAN_POINT('',(198.04165,-60.8831,1.585)); +#222985 = VERTEX_POINT('',#222986); +#222986 = CARTESIAN_POINT('',(198.04165,-60.7631,1.585)); +#222987 = CIRCLE('',#222988,6.000000000043E-02); +#222988 = AXIS2_PLACEMENT_3D('',#222989,#222990,#222991); +#222989 = CARTESIAN_POINT('',(198.04164977441,-60.8231,1.585)); +#222990 = DIRECTION('',(0.,0.,-1.)); +#222991 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#222992 = ORIENTED_EDGE('',*,*,#222993,.T.); +#222993 = EDGE_CURVE('',#222985,#222994,#222996,.T.); +#222994 = VERTEX_POINT('',#222995); +#222995 = CARTESIAN_POINT('',(202.05165,-60.7631,1.585)); +#222996 = LINE('',#222997,#222998); +#222997 = CARTESIAN_POINT('',(198.04165,-60.7631,1.585)); +#222998 = VECTOR('',#222999,1.); +#222999 = DIRECTION('',(1.,0.,0.)); +#223000 = ORIENTED_EDGE('',*,*,#223001,.T.); +#223001 = EDGE_CURVE('',#222994,#223002,#223004,.T.); +#223002 = VERTEX_POINT('',#223003); +#223003 = CARTESIAN_POINT('',(202.11165,-60.8231,1.585)); +#223004 = CIRCLE('',#223005,5.999932016259E-02); +#223005 = AXIS2_PLACEMENT_3D('',#223006,#223007,#223008); +#223006 = CARTESIAN_POINT('',(202.05165067984,-60.82309932015,1.585)); +#223007 = DIRECTION('',(0.,0.,-1.)); +#223008 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#223009 = ORIENTED_EDGE('',*,*,#223010,.T.); +#223010 = EDGE_CURVE('',#223002,#223011,#223013,.T.); +#223011 = VERTEX_POINT('',#223012); +#223012 = CARTESIAN_POINT('',(202.11165,-62.8231,1.585)); +#223013 = LINE('',#223014,#223015); +#223014 = CARTESIAN_POINT('',(202.11165,-60.8231,1.585)); +#223015 = VECTOR('',#223016,1.); +#223016 = DIRECTION('',(0.,-1.,0.)); +#223017 = ORIENTED_EDGE('',*,*,#223018,.T.); +#223018 = EDGE_CURVE('',#223011,#223019,#223021,.T.); +#223019 = VERTEX_POINT('',#223020); +#223020 = CARTESIAN_POINT('',(202.05165,-62.8831,1.585)); +#223021 = CIRCLE('',#223022,5.999932016262E-02); +#223022 = AXIS2_PLACEMENT_3D('',#223023,#223024,#223025); +#223023 = CARTESIAN_POINT('',(202.05165067984,-62.82310067984,1.585)); +#223024 = DIRECTION('',(0.,0.,-1.)); +#223025 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#223026 = ORIENTED_EDGE('',*,*,#223027,.T.); +#223027 = EDGE_CURVE('',#223019,#223028,#223030,.T.); +#223028 = VERTEX_POINT('',#223029); +#223029 = CARTESIAN_POINT('',(198.04165,-62.8831,1.585)); +#223030 = LINE('',#223031,#223032); +#223031 = CARTESIAN_POINT('',(202.05165,-62.8831,1.585)); +#223032 = VECTOR('',#223033,1.); +#223033 = DIRECTION('',(-1.,0.,0.)); +#223034 = ORIENTED_EDGE('',*,*,#223035,.T.); +#223035 = EDGE_CURVE('',#223028,#223036,#223038,.T.); +#223036 = VERTEX_POINT('',#223037); +#223037 = CARTESIAN_POINT('',(198.04165,-62.7631,1.585)); +#223038 = CIRCLE('',#223039,6.000000000043E-02); +#223039 = AXIS2_PLACEMENT_3D('',#223040,#223041,#223042); +#223040 = CARTESIAN_POINT('',(198.04164977441,-62.8231,1.585)); +#223041 = DIRECTION('',(0.,0.,-1.)); +#223042 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#223043 = ORIENTED_EDGE('',*,*,#223044,.T.); +#223044 = EDGE_CURVE('',#223036,#223045,#223047,.T.); +#223045 = VERTEX_POINT('',#223046); +#223046 = CARTESIAN_POINT('',(201.99165,-62.7631,1.585)); +#223047 = LINE('',#223048,#223049); +#223048 = CARTESIAN_POINT('',(198.04165,-62.7631,1.585)); +#223049 = VECTOR('',#223050,1.); +#223050 = DIRECTION('',(1.,0.,0.)); +#223051 = ORIENTED_EDGE('',*,*,#223052,.T.); +#223052 = EDGE_CURVE('',#223045,#223053,#223055,.T.); +#223053 = VERTEX_POINT('',#223054); +#223054 = CARTESIAN_POINT('',(201.99165,-60.8831,1.585)); +#223055 = LINE('',#223056,#223057); +#223056 = CARTESIAN_POINT('',(201.99165,-62.7631,1.585)); +#223057 = VECTOR('',#223058,1.); +#223058 = DIRECTION('',(0.,1.,0.)); +#223059 = ORIENTED_EDGE('',*,*,#223060,.T.); +#223060 = EDGE_CURVE('',#223053,#222983,#223061,.T.); +#223061 = LINE('',#223062,#223063); +#223062 = CARTESIAN_POINT('',(201.99165,-60.8831,1.585)); +#223063 = VECTOR('',#223064,1.); +#223064 = DIRECTION('',(-1.,0.,0.)); +#223065 = PLANE('',#223066); +#223066 = AXIS2_PLACEMENT_3D('',#223067,#223068,#223069); +#223067 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223068 = DIRECTION('',(0.,0.,1.)); +#223069 = DIRECTION('',(1.,0.,-0.)); +#223070 = SHELL_BASED_SURFACE_MODEL('',(#223071)); +#223071 = OPEN_SHELL('',(#223072)); +#223072 = ADVANCED_FACE('',(#223073),#223159,.T.); +#223073 = FACE_BOUND('',#223074,.F.); +#223074 = EDGE_LOOP('',(#223075,#223086,#223094,#223103,#223111,#223120, + #223128,#223136,#223144,#223153)); +#223075 = ORIENTED_EDGE('',*,*,#223076,.T.); +#223076 = EDGE_CURVE('',#223077,#223079,#223081,.T.); +#223077 = VERTEX_POINT('',#223078); +#223078 = CARTESIAN_POINT('',(182.37165,-61.7631,1.585)); +#223079 = VERTEX_POINT('',#223080); +#223080 = CARTESIAN_POINT('',(182.43165,-61.7031,1.585)); +#223081 = CIRCLE('',#223082,5.999932016262E-02); +#223082 = AXIS2_PLACEMENT_3D('',#223083,#223084,#223085); +#223083 = CARTESIAN_POINT('',(182.43164932015,-61.76309932015,1.585)); +#223084 = DIRECTION('',(0.,0.,-1.)); +#223085 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#223086 = ORIENTED_EDGE('',*,*,#223087,.T.); +#223087 = EDGE_CURVE('',#223079,#223088,#223090,.T.); +#223088 = VERTEX_POINT('',#223089); +#223089 = CARTESIAN_POINT('',(183.95165,-61.7031,1.585)); +#223090 = LINE('',#223091,#223092); +#223091 = CARTESIAN_POINT('',(182.43165,-61.7031,1.585)); +#223092 = VECTOR('',#223093,1.); +#223093 = DIRECTION('',(1.,0.,0.)); +#223094 = ORIENTED_EDGE('',*,*,#223095,.T.); +#223095 = EDGE_CURVE('',#223088,#223096,#223098,.T.); +#223096 = VERTEX_POINT('',#223097); +#223097 = CARTESIAN_POINT('',(184.01165,-61.7631,1.585)); +#223098 = CIRCLE('',#223099,5.999932016259E-02); +#223099 = AXIS2_PLACEMENT_3D('',#223100,#223101,#223102); +#223100 = CARTESIAN_POINT('',(183.95165067984,-61.76309932015,1.585)); +#223101 = DIRECTION('',(0.,0.,-1.)); +#223102 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#223103 = ORIENTED_EDGE('',*,*,#223104,.T.); +#223104 = EDGE_CURVE('',#223096,#223105,#223107,.T.); +#223105 = VERTEX_POINT('',#223106); +#223106 = CARTESIAN_POINT('',(184.01165,-62.7631,1.585)); +#223107 = LINE('',#223108,#223109); +#223108 = CARTESIAN_POINT('',(184.01165,-61.7631,1.585)); +#223109 = VECTOR('',#223110,1.); +#223110 = DIRECTION('',(0.,-1.,0.)); +#223111 = ORIENTED_EDGE('',*,*,#223112,.T.); +#223112 = EDGE_CURVE('',#223105,#223113,#223115,.T.); +#223113 = VERTEX_POINT('',#223114); +#223114 = CARTESIAN_POINT('',(183.89165,-62.7631,1.585)); +#223115 = CIRCLE('',#223116,6.000000000042E-02); +#223116 = AXIS2_PLACEMENT_3D('',#223117,#223118,#223119); +#223117 = CARTESIAN_POINT('',(183.95165,-62.76310022558,1.585)); +#223118 = DIRECTION('',(0.,0.,-1.)); +#223119 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#223120 = ORIENTED_EDGE('',*,*,#223121,.T.); +#223121 = EDGE_CURVE('',#223113,#223122,#223124,.T.); +#223122 = VERTEX_POINT('',#223123); +#223123 = CARTESIAN_POINT('',(183.89165,-61.8231,1.585)); +#223124 = LINE('',#223125,#223126); +#223125 = CARTESIAN_POINT('',(183.89165,-62.7631,1.585)); +#223126 = VECTOR('',#223127,1.); +#223127 = DIRECTION('',(0.,1.,0.)); +#223128 = ORIENTED_EDGE('',*,*,#223129,.T.); +#223129 = EDGE_CURVE('',#223122,#223130,#223132,.T.); +#223130 = VERTEX_POINT('',#223131); +#223131 = CARTESIAN_POINT('',(182.489661,-61.8231,1.585)); +#223132 = LINE('',#223133,#223134); +#223133 = CARTESIAN_POINT('',(183.89165,-61.8231,1.585)); +#223134 = VECTOR('',#223135,1.); +#223135 = DIRECTION('',(-1.,0.,0.)); +#223136 = ORIENTED_EDGE('',*,*,#223137,.T.); +#223137 = EDGE_CURVE('',#223130,#223138,#223140,.T.); +#223138 = VERTEX_POINT('',#223139); +#223139 = CARTESIAN_POINT('',(182.487083,-61.836061,1.585)); +#223140 = LINE('',#223141,#223142); +#223141 = CARTESIAN_POINT('',(182.489661,-61.8231,1.585)); +#223142 = VECTOR('',#223143,1.); +#223143 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#223144 = ORIENTED_EDGE('',*,*,#223145,.T.); +#223145 = EDGE_CURVE('',#223138,#223146,#223148,.T.); +#223146 = VERTEX_POINT('',#223147); +#223147 = CARTESIAN_POINT('',(182.37165,-61.8131,1.585)); +#223148 = CIRCLE('',#223149,6.000007318649E-02); +#223149 = AXIS2_PLACEMENT_3D('',#223150,#223151,#223152); +#223150 = CARTESIAN_POINT('',(182.43165007318,-61.81310017668,1.585)); +#223151 = DIRECTION('',(-0.,0.,-1.)); +#223152 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#223153 = ORIENTED_EDGE('',*,*,#223154,.T.); +#223154 = EDGE_CURVE('',#223146,#223077,#223155,.T.); +#223155 = LINE('',#223156,#223157); +#223156 = CARTESIAN_POINT('',(182.37165,-61.8131,1.585)); +#223157 = VECTOR('',#223158,1.); +#223158 = DIRECTION('',(0.,1.,0.)); +#223159 = PLANE('',#223160); +#223160 = AXIS2_PLACEMENT_3D('',#223161,#223162,#223163); +#223161 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223162 = DIRECTION('',(0.,0.,1.)); +#223163 = DIRECTION('',(1.,0.,-0.)); +#223164 = SHELL_BASED_SURFACE_MODEL('',(#223165)); +#223165 = OPEN_SHELL('',(#223166)); +#223166 = ADVANCED_FACE('',(#223167),#223261,.T.); +#223167 = FACE_BOUND('',#223168,.F.); +#223168 = EDGE_LOOP('',(#223169,#223180,#223188,#223197,#223205,#223214, + #223222,#223231,#223239,#223247,#223255)); +#223169 = ORIENTED_EDGE('',*,*,#223170,.T.); +#223170 = EDGE_CURVE('',#223171,#223173,#223175,.T.); +#223171 = VERTEX_POINT('',#223172); +#223172 = CARTESIAN_POINT('',(139.354567,-61.437039,1.585)); +#223173 = VERTEX_POINT('',#223174); +#223174 = CARTESIAN_POINT('',(139.47,-61.46,1.585)); +#223175 = CIRCLE('',#223176,6.000007318647E-02); +#223176 = AXIS2_PLACEMENT_3D('',#223177,#223178,#223179); +#223177 = CARTESIAN_POINT('',(139.40999992681,-61.45999982331,1.585)); +#223178 = DIRECTION('',(0.,0.,-1.)); +#223179 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#223180 = ORIENTED_EDGE('',*,*,#223181,.T.); +#223181 = EDGE_CURVE('',#223173,#223182,#223184,.T.); +#223182 = VERTEX_POINT('',#223183); +#223183 = CARTESIAN_POINT('',(139.47,-62.46,1.585)); +#223184 = LINE('',#223185,#223186); +#223185 = CARTESIAN_POINT('',(139.47,-61.46,1.585)); +#223186 = VECTOR('',#223187,1.); +#223187 = DIRECTION('',(0.,-1.,0.)); +#223188 = ORIENTED_EDGE('',*,*,#223189,.T.); +#223189 = EDGE_CURVE('',#223182,#223190,#223192,.T.); +#223190 = VERTEX_POINT('',#223191); +#223191 = CARTESIAN_POINT('',(139.41,-62.52,1.585)); +#223192 = CIRCLE('',#223193,5.999932016262E-02); +#223193 = AXIS2_PLACEMENT_3D('',#223194,#223195,#223196); +#223194 = CARTESIAN_POINT('',(139.41000067984,-62.46000067984,1.585)); +#223195 = DIRECTION('',(0.,0.,-1.)); +#223196 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#223197 = ORIENTED_EDGE('',*,*,#223198,.T.); +#223198 = EDGE_CURVE('',#223190,#223199,#223201,.T.); +#223199 = VERTEX_POINT('',#223200); +#223200 = CARTESIAN_POINT('',(137.89,-62.52,1.585)); +#223201 = LINE('',#223202,#223203); +#223202 = CARTESIAN_POINT('',(139.41,-62.52,1.585)); +#223203 = VECTOR('',#223204,1.); +#223204 = DIRECTION('',(-1.,0.,0.)); +#223205 = ORIENTED_EDGE('',*,*,#223206,.T.); +#223206 = EDGE_CURVE('',#223199,#223207,#223209,.T.); +#223207 = VERTEX_POINT('',#223208); +#223208 = CARTESIAN_POINT('',(137.83,-62.46,1.585)); +#223209 = CIRCLE('',#223210,5.999932016258E-02); +#223210 = AXIS2_PLACEMENT_3D('',#223211,#223212,#223213); +#223211 = CARTESIAN_POINT('',(137.88999932015,-62.46000067984,1.585)); +#223212 = DIRECTION('',(0.,0.,-1.)); +#223213 = DIRECTION('',(1.133081564773E-05,-0.999999999936,0.)); +#223214 = ORIENTED_EDGE('',*,*,#223215,.T.); +#223215 = EDGE_CURVE('',#223207,#223216,#223218,.T.); +#223216 = VERTEX_POINT('',#223217); +#223217 = CARTESIAN_POINT('',(137.83,-62.41,1.585)); +#223218 = LINE('',#223219,#223220); +#223219 = CARTESIAN_POINT('',(137.83,-62.46,1.585)); +#223220 = VECTOR('',#223221,1.); +#223221 = DIRECTION('',(0.,1.,0.)); +#223222 = ORIENTED_EDGE('',*,*,#223223,.T.); +#223223 = EDGE_CURVE('',#223216,#223224,#223226,.T.); +#223224 = VERTEX_POINT('',#223225); +#223225 = CARTESIAN_POINT('',(137.945433,-62.387039,1.585)); +#223226 = CIRCLE('',#223227,6.000007318647E-02); +#223227 = AXIS2_PLACEMENT_3D('',#223228,#223229,#223230); +#223228 = CARTESIAN_POINT('',(137.89000007318,-62.40999982331,1.585)); +#223229 = DIRECTION('',(0.,0.,-1.)); +#223230 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#223231 = ORIENTED_EDGE('',*,*,#223232,.T.); +#223232 = EDGE_CURVE('',#223224,#223233,#223235,.T.); +#223233 = VERTEX_POINT('',#223234); +#223234 = CARTESIAN_POINT('',(137.948011,-62.4,1.585)); +#223235 = LINE('',#223236,#223237); +#223236 = CARTESIAN_POINT('',(137.945433,-62.387039,1.585)); +#223237 = VECTOR('',#223238,1.); +#223238 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#223239 = ORIENTED_EDGE('',*,*,#223240,.T.); +#223240 = EDGE_CURVE('',#223233,#223241,#223243,.T.); +#223241 = VERTEX_POINT('',#223242); +#223242 = CARTESIAN_POINT('',(139.35,-62.4,1.585)); +#223243 = LINE('',#223244,#223245); +#223244 = CARTESIAN_POINT('',(137.948011,-62.4,1.585)); +#223245 = VECTOR('',#223246,1.); +#223246 = DIRECTION('',(1.,0.,0.)); +#223247 = ORIENTED_EDGE('',*,*,#223248,.T.); +#223248 = EDGE_CURVE('',#223241,#223249,#223251,.T.); +#223249 = VERTEX_POINT('',#223250); +#223250 = CARTESIAN_POINT('',(139.35,-61.46,1.585)); +#223251 = LINE('',#223252,#223253); +#223252 = CARTESIAN_POINT('',(139.35,-62.4,1.585)); +#223253 = VECTOR('',#223254,1.); +#223254 = DIRECTION('',(0.,1.,0.)); +#223255 = ORIENTED_EDGE('',*,*,#223256,.T.); +#223256 = EDGE_CURVE('',#223249,#223171,#223257,.T.); +#223257 = LINE('',#223258,#223259); +#223258 = CARTESIAN_POINT('',(139.35,-61.46,1.585)); +#223259 = VECTOR('',#223260,1.); +#223260 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#223261 = PLANE('',#223262); +#223262 = AXIS2_PLACEMENT_3D('',#223263,#223264,#223265); +#223263 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223264 = DIRECTION('',(0.,0.,1.)); +#223265 = DIRECTION('',(1.,0.,-0.)); +#223266 = SHELL_BASED_SURFACE_MODEL('',(#223267)); +#223267 = OPEN_SHELL('',(#223268)); +#223268 = ADVANCED_FACE('',(#223269),#223305,.T.); +#223269 = FACE_BOUND('',#223270,.F.); +#223270 = EDGE_LOOP('',(#223271,#223282,#223290,#223299)); +#223271 = ORIENTED_EDGE('',*,*,#223272,.T.); +#223272 = EDGE_CURVE('',#223273,#223275,#223277,.T.); +#223273 = VERTEX_POINT('',#223274); +#223274 = CARTESIAN_POINT('',(84.954392,-61.9056,1.585)); +#223275 = VERTEX_POINT('',#223276); +#223276 = CARTESIAN_POINT('',(84.954392,-61.7856,1.585)); +#223277 = CIRCLE('',#223278,6.000000000042E-02); +#223278 = AXIS2_PLACEMENT_3D('',#223279,#223280,#223281); +#223279 = CARTESIAN_POINT('',(84.954391774412,-61.8456,1.585)); +#223280 = DIRECTION('',(0.,0.,-1.)); +#223281 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#223282 = ORIENTED_EDGE('',*,*,#223283,.T.); +#223283 = EDGE_CURVE('',#223275,#223284,#223286,.T.); +#223284 = VERTEX_POINT('',#223285); +#223285 = CARTESIAN_POINT('',(85.428908,-61.7856,1.585)); +#223286 = LINE('',#223287,#223288); +#223287 = CARTESIAN_POINT('',(84.954392,-61.7856,1.585)); +#223288 = VECTOR('',#223289,1.); +#223289 = DIRECTION('',(1.,0.,0.)); +#223290 = ORIENTED_EDGE('',*,*,#223291,.T.); +#223291 = EDGE_CURVE('',#223284,#223292,#223294,.T.); +#223292 = VERTEX_POINT('',#223293); +#223293 = CARTESIAN_POINT('',(85.428908,-61.9056,1.585)); +#223294 = CIRCLE('',#223295,6.000000000042E-02); +#223295 = AXIS2_PLACEMENT_3D('',#223296,#223297,#223298); +#223296 = CARTESIAN_POINT('',(85.428908225588,-61.8456,1.585)); +#223297 = DIRECTION('',(0.,0.,-1.)); +#223298 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#223299 = ORIENTED_EDGE('',*,*,#223300,.T.); +#223300 = EDGE_CURVE('',#223292,#223273,#223301,.T.); +#223301 = LINE('',#223302,#223303); +#223302 = CARTESIAN_POINT('',(85.428908,-61.9056,1.585)); +#223303 = VECTOR('',#223304,1.); +#223304 = DIRECTION('',(-1.,0.,0.)); +#223305 = PLANE('',#223306); +#223306 = AXIS2_PLACEMENT_3D('',#223307,#223308,#223309); +#223307 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223308 = DIRECTION('',(0.,0.,1.)); +#223309 = DIRECTION('',(1.,0.,-0.)); +#223310 = SHELL_BASED_SURFACE_MODEL('',(#223311)); +#223311 = OPEN_SHELL('',(#223312)); +#223312 = ADVANCED_FACE('',(#223313),#223407,.T.); +#223313 = FACE_BOUND('',#223314,.F.); +#223314 = EDGE_LOOP('',(#223315,#223326,#223334,#223343,#223351,#223360, + #223368,#223377,#223385,#223393,#223401)); +#223315 = ORIENTED_EDGE('',*,*,#223316,.T.); +#223316 = EDGE_CURVE('',#223317,#223319,#223321,.T.); +#223317 = VERTEX_POINT('',#223318); +#223318 = CARTESIAN_POINT('',(146.154567,-60.737039,1.585)); +#223319 = VERTEX_POINT('',#223320); +#223320 = CARTESIAN_POINT('',(146.27,-60.76,1.585)); +#223321 = CIRCLE('',#223322,6.000007318649E-02); +#223322 = AXIS2_PLACEMENT_3D('',#223323,#223324,#223325); +#223323 = CARTESIAN_POINT('',(146.20999992681,-60.75999982331,1.585)); +#223324 = DIRECTION('',(0.,0.,-1.)); +#223325 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#223326 = ORIENTED_EDGE('',*,*,#223327,.T.); +#223327 = EDGE_CURVE('',#223319,#223328,#223330,.T.); +#223328 = VERTEX_POINT('',#223329); +#223329 = CARTESIAN_POINT('',(146.27,-61.76,1.585)); +#223330 = LINE('',#223331,#223332); +#223331 = CARTESIAN_POINT('',(146.27,-60.76,1.585)); +#223332 = VECTOR('',#223333,1.); +#223333 = DIRECTION('',(0.,-1.,0.)); +#223334 = ORIENTED_EDGE('',*,*,#223335,.T.); +#223335 = EDGE_CURVE('',#223328,#223336,#223338,.T.); +#223336 = VERTEX_POINT('',#223337); +#223337 = CARTESIAN_POINT('',(146.21,-61.82,1.585)); +#223338 = CIRCLE('',#223339,5.999932016262E-02); +#223339 = AXIS2_PLACEMENT_3D('',#223340,#223341,#223342); +#223340 = CARTESIAN_POINT('',(146.21000067984,-61.76000067984,1.585)); +#223341 = DIRECTION('',(0.,0.,-1.)); +#223342 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#223343 = ORIENTED_EDGE('',*,*,#223344,.T.); +#223344 = EDGE_CURVE('',#223336,#223345,#223347,.T.); +#223345 = VERTEX_POINT('',#223346); +#223346 = CARTESIAN_POINT('',(144.69,-61.82,1.585)); +#223347 = LINE('',#223348,#223349); +#223348 = CARTESIAN_POINT('',(146.21,-61.82,1.585)); +#223349 = VECTOR('',#223350,1.); +#223350 = DIRECTION('',(-1.,0.,0.)); +#223351 = ORIENTED_EDGE('',*,*,#223352,.T.); +#223352 = EDGE_CURVE('',#223345,#223353,#223355,.T.); +#223353 = VERTEX_POINT('',#223354); +#223354 = CARTESIAN_POINT('',(144.63,-61.76,1.585)); +#223355 = CIRCLE('',#223356,5.999932016259E-02); +#223356 = AXIS2_PLACEMENT_3D('',#223357,#223358,#223359); +#223357 = CARTESIAN_POINT('',(144.68999932015,-61.76000067984,1.585)); +#223358 = DIRECTION('',(0.,0.,-1.)); +#223359 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#223360 = ORIENTED_EDGE('',*,*,#223361,.T.); +#223361 = EDGE_CURVE('',#223353,#223362,#223364,.T.); +#223362 = VERTEX_POINT('',#223363); +#223363 = CARTESIAN_POINT('',(144.63,-61.71,1.585)); +#223364 = LINE('',#223365,#223366); +#223365 = CARTESIAN_POINT('',(144.63,-61.76,1.585)); +#223366 = VECTOR('',#223367,1.); +#223367 = DIRECTION('',(0.,1.,0.)); +#223368 = ORIENTED_EDGE('',*,*,#223369,.T.); +#223369 = EDGE_CURVE('',#223362,#223370,#223372,.T.); +#223370 = VERTEX_POINT('',#223371); +#223371 = CARTESIAN_POINT('',(144.745433,-61.687039,1.585)); +#223372 = CIRCLE('',#223373,6.000007318647E-02); +#223373 = AXIS2_PLACEMENT_3D('',#223374,#223375,#223376); +#223374 = CARTESIAN_POINT('',(144.69000007318,-61.70999982331,1.585)); +#223375 = DIRECTION('',(0.,0.,-1.)); +#223376 = DIRECTION('',(-0.999999999996,-2.944769485282E-06,-0.)); +#223377 = ORIENTED_EDGE('',*,*,#223378,.T.); +#223378 = EDGE_CURVE('',#223370,#223379,#223381,.T.); +#223379 = VERTEX_POINT('',#223380); +#223380 = CARTESIAN_POINT('',(144.748011,-61.7,1.585)); +#223381 = LINE('',#223382,#223383); +#223382 = CARTESIAN_POINT('',(144.745433,-61.687039,1.585)); +#223383 = VECTOR('',#223384,1.); +#223384 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#223385 = ORIENTED_EDGE('',*,*,#223386,.T.); +#223386 = EDGE_CURVE('',#223379,#223387,#223389,.T.); +#223387 = VERTEX_POINT('',#223388); +#223388 = CARTESIAN_POINT('',(146.15,-61.7,1.585)); +#223389 = LINE('',#223390,#223391); +#223390 = CARTESIAN_POINT('',(144.748011,-61.7,1.585)); +#223391 = VECTOR('',#223392,1.); +#223392 = DIRECTION('',(1.,0.,0.)); +#223393 = ORIENTED_EDGE('',*,*,#223394,.T.); +#223394 = EDGE_CURVE('',#223387,#223395,#223397,.T.); +#223395 = VERTEX_POINT('',#223396); +#223396 = CARTESIAN_POINT('',(146.15,-60.76,1.585)); +#223397 = LINE('',#223398,#223399); +#223398 = CARTESIAN_POINT('',(146.15,-61.7,1.585)); +#223399 = VECTOR('',#223400,1.); +#223400 = DIRECTION('',(0.,1.,0.)); +#223401 = ORIENTED_EDGE('',*,*,#223402,.T.); +#223402 = EDGE_CURVE('',#223395,#223317,#223403,.T.); +#223403 = LINE('',#223404,#223405); +#223404 = CARTESIAN_POINT('',(146.15,-60.76,1.585)); +#223405 = VECTOR('',#223406,1.); +#223406 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#223407 = PLANE('',#223408); +#223408 = AXIS2_PLACEMENT_3D('',#223409,#223410,#223411); +#223409 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223410 = DIRECTION('',(0.,0.,1.)); +#223411 = DIRECTION('',(1.,0.,-0.)); +#223412 = SHELL_BASED_SURFACE_MODEL('',(#223413)); +#223413 = OPEN_SHELL('',(#223414)); +#223414 = ADVANCED_FACE('',(#223415),#223459,.T.); +#223415 = FACE_BOUND('',#223416,.F.); +#223416 = EDGE_LOOP('',(#223417,#223428,#223436,#223445,#223453)); +#223417 = ORIENTED_EDGE('',*,*,#223418,.T.); +#223418 = EDGE_CURVE('',#223419,#223421,#223423,.T.); +#223419 = VERTEX_POINT('',#223420); +#223420 = CARTESIAN_POINT('',(98.376217,-60.910139,1.585)); +#223421 = VERTEX_POINT('',#223422); +#223422 = CARTESIAN_POINT('',(98.49165,-60.9331,1.585)); +#223423 = CIRCLE('',#223424,6.000007318648E-02); +#223424 = AXIS2_PLACEMENT_3D('',#223425,#223426,#223427); +#223425 = CARTESIAN_POINT('',(98.431649926814,-60.93309982331,1.585)); +#223426 = DIRECTION('',(0.,0.,-1.)); +#223427 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#223428 = ORIENTED_EDGE('',*,*,#223429,.T.); +#223429 = EDGE_CURVE('',#223421,#223430,#223432,.T.); +#223430 = VERTEX_POINT('',#223431); +#223431 = CARTESIAN_POINT('',(98.49165,-61.7131,1.585)); +#223432 = LINE('',#223433,#223434); +#223433 = CARTESIAN_POINT('',(98.49165,-60.9331,1.585)); +#223434 = VECTOR('',#223435,1.); +#223435 = DIRECTION('',(0.,-1.,0.)); +#223436 = ORIENTED_EDGE('',*,*,#223437,.T.); +#223437 = EDGE_CURVE('',#223430,#223438,#223440,.T.); +#223438 = VERTEX_POINT('',#223439); +#223439 = CARTESIAN_POINT('',(98.37165,-61.7131,1.585)); +#223440 = CIRCLE('',#223441,6.000000000043E-02); +#223441 = AXIS2_PLACEMENT_3D('',#223442,#223443,#223444); +#223442 = CARTESIAN_POINT('',(98.43165,-61.71310022558,1.585)); +#223443 = DIRECTION('',(0.,0.,-1.)); +#223444 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#223445 = ORIENTED_EDGE('',*,*,#223446,.T.); +#223446 = EDGE_CURVE('',#223438,#223447,#223449,.T.); +#223447 = VERTEX_POINT('',#223448); +#223448 = CARTESIAN_POINT('',(98.37165,-60.9331,1.585)); +#223449 = LINE('',#223450,#223451); +#223450 = CARTESIAN_POINT('',(98.37165,-61.7131,1.585)); +#223451 = VECTOR('',#223452,1.); +#223452 = DIRECTION('',(0.,1.,0.)); +#223453 = ORIENTED_EDGE('',*,*,#223454,.T.); +#223454 = EDGE_CURVE('',#223447,#223419,#223455,.T.); +#223455 = LINE('',#223456,#223457); +#223456 = CARTESIAN_POINT('',(98.37165,-60.9331,1.585)); +#223457 = VECTOR('',#223458,1.); +#223458 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#223459 = PLANE('',#223460); +#223460 = AXIS2_PLACEMENT_3D('',#223461,#223462,#223463); +#223461 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223462 = DIRECTION('',(0.,0.,1.)); +#223463 = DIRECTION('',(1.,0.,-0.)); +#223464 = SHELL_BASED_SURFACE_MODEL('',(#223465)); +#223465 = OPEN_SHELL('',(#223466)); +#223466 = ADVANCED_FACE('',(#223467,#223655),#223789,.T.); +#223467 = FACE_BOUND('',#223468,.F.); +#223468 = EDGE_LOOP('',(#223469,#223480,#223488,#223496,#223504,#223512, + #223520,#223528,#223536,#223544,#223552,#223561,#223569,#223577, + #223585,#223593,#223601,#223609,#223617,#223625,#223633,#223641, + #223649)); +#223469 = ORIENTED_EDGE('',*,*,#223470,.T.); +#223470 = EDGE_CURVE('',#223471,#223473,#223475,.T.); +#223471 = VERTEX_POINT('',#223472); +#223472 = CARTESIAN_POINT('',(182.485147,-60.362418,1.585)); +#223473 = VERTEX_POINT('',#223474); +#223474 = CARTESIAN_POINT('',(182.953218,-60.367786,1.585)); +#223475 = CIRCLE('',#223476,0.397578964435); +#223476 = AXIS2_PLACEMENT_3D('',#223477,#223478,#223479); +#223477 = CARTESIAN_POINT('',(182.71549697212,-60.68646726061,1.585)); +#223478 = DIRECTION('',(0.,0.,-1.)); +#223479 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#223480 = ORIENTED_EDGE('',*,*,#223481,.T.); +#223481 = EDGE_CURVE('',#223473,#223482,#223484,.T.); +#223482 = VERTEX_POINT('',#223483); +#223483 = CARTESIAN_POINT('',(183.063534,-60.479108,1.585)); +#223484 = LINE('',#223485,#223486); +#223485 = CARTESIAN_POINT('',(182.953218,-60.367786,1.585)); +#223486 = VECTOR('',#223487,1.); +#223487 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#223488 = ORIENTED_EDGE('',*,*,#223489,.T.); +#223489 = EDGE_CURVE('',#223482,#223490,#223492,.T.); +#223490 = VERTEX_POINT('',#223491); +#223491 = CARTESIAN_POINT('',(183.073934,-60.502586,1.585)); +#223492 = LINE('',#223493,#223494); +#223493 = CARTESIAN_POINT('',(183.063534,-60.479108,1.585)); +#223494 = VECTOR('',#223495,1.); +#223495 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#223496 = ORIENTED_EDGE('',*,*,#223497,.T.); +#223497 = EDGE_CURVE('',#223490,#223498,#223500,.T.); +#223498 = VERTEX_POINT('',#223499); +#223499 = CARTESIAN_POINT('',(183.123792,-60.711252,1.585)); +#223500 = LINE('',#223501,#223502); +#223501 = CARTESIAN_POINT('',(183.073934,-60.502586,1.585)); +#223502 = VECTOR('',#223503,1.); +#223503 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#223504 = ORIENTED_EDGE('',*,*,#223505,.T.); +#223505 = EDGE_CURVE('',#223498,#223506,#223508,.T.); +#223506 = VERTEX_POINT('',#223507); +#223507 = CARTESIAN_POINT('',(183.121553,-61.062775,1.585)); +#223508 = LINE('',#223509,#223510); +#223509 = CARTESIAN_POINT('',(183.123792,-60.711252,1.585)); +#223510 = VECTOR('',#223511,1.); +#223511 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#223512 = ORIENTED_EDGE('',*,*,#223513,.T.); +#223513 = EDGE_CURVE('',#223506,#223514,#223516,.T.); +#223514 = VERTEX_POINT('',#223515); +#223515 = CARTESIAN_POINT('',(183.068987,-61.267097,1.585)); +#223516 = LINE('',#223517,#223518); +#223517 = CARTESIAN_POINT('',(183.121553,-61.062775,1.585)); +#223518 = VECTOR('',#223519,1.); +#223519 = DIRECTION('',(-0.249156885797,-0.968463136242,0.)); +#223520 = ORIENTED_EDGE('',*,*,#223521,.T.); +#223521 = EDGE_CURVE('',#223514,#223522,#223524,.T.); +#223522 = VERTEX_POINT('',#223523); +#223523 = CARTESIAN_POINT('',(183.054207,-61.288093,1.585)); +#223524 = LINE('',#223525,#223526); +#223525 = CARTESIAN_POINT('',(183.068987,-61.267097,1.585)); +#223526 = VECTOR('',#223527,1.); +#223527 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#223528 = ORIENTED_EDGE('',*,*,#223529,.T.); +#223529 = EDGE_CURVE('',#223522,#223530,#223532,.T.); +#223530 = VERTEX_POINT('',#223531); +#223531 = CARTESIAN_POINT('',(183.012,-61.330299,1.585)); +#223532 = LINE('',#223533,#223534); +#223533 = CARTESIAN_POINT('',(183.054207,-61.288093,1.585)); +#223534 = VECTOR('',#223535,1.); +#223535 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#223536 = ORIENTED_EDGE('',*,*,#223537,.T.); +#223537 = EDGE_CURVE('',#223530,#223538,#223540,.T.); +#223538 = VERTEX_POINT('',#223539); +#223539 = CARTESIAN_POINT('',(183.0456,-61.363899,1.585)); +#223540 = LINE('',#223541,#223542); +#223541 = CARTESIAN_POINT('',(183.012,-61.330299,1.585)); +#223542 = VECTOR('',#223543,1.); +#223543 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#223544 = ORIENTED_EDGE('',*,*,#223545,.T.); +#223545 = EDGE_CURVE('',#223538,#223546,#223548,.T.); +#223546 = VERTEX_POINT('',#223547); +#223547 = CARTESIAN_POINT('',(183.142395,-61.413907,1.585)); +#223548 = LINE('',#223549,#223550); +#223549 = CARTESIAN_POINT('',(183.0456,-61.363899,1.585)); +#223550 = VECTOR('',#223551,1.); +#223551 = DIRECTION('',(0.888436200035,-0.45900012905,0.)); +#223552 = ORIENTED_EDGE('',*,*,#223553,.T.); +#223553 = EDGE_CURVE('',#223546,#223554,#223556,.T.); +#223554 = VERTEX_POINT('',#223555); +#223555 = CARTESIAN_POINT('',(183.06287,-61.540239,1.585)); +#223556 = CIRCLE('',#223557,7.50002944036E-02); +#223557 = AXIS2_PLACEMENT_3D('',#223558,#223559,#223560); +#223558 = CARTESIAN_POINT('',(183.09641105397,-61.47315664867,1.585)); +#223559 = DIRECTION('',(0.,0.,-1.)); +#223560 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#223561 = ORIENTED_EDGE('',*,*,#223562,.T.); +#223562 = EDGE_CURVE('',#223554,#223563,#223565,.T.); +#223563 = VERTEX_POINT('',#223564); +#223564 = CARTESIAN_POINT('',(182.95389,-61.483291,1.585)); +#223565 = LINE('',#223566,#223567); +#223566 = CARTESIAN_POINT('',(183.06287,-61.540239,1.585)); +#223567 = VECTOR('',#223568,1.); +#223568 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#223569 = ORIENTED_EDGE('',*,*,#223570,.T.); +#223570 = EDGE_CURVE('',#223563,#223571,#223573,.T.); +#223571 = VERTEX_POINT('',#223572); +#223572 = CARTESIAN_POINT('',(182.891126,-61.421557,1.585)); +#223573 = LINE('',#223574,#223575); +#223574 = CARTESIAN_POINT('',(182.95389,-61.483291,1.585)); +#223575 = VECTOR('',#223576,1.); +#223576 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#223577 = ORIENTED_EDGE('',*,*,#223578,.T.); +#223578 = EDGE_CURVE('',#223571,#223579,#223581,.T.); +#223579 = VERTEX_POINT('',#223580); +#223580 = CARTESIAN_POINT('',(182.825329,-61.451478,1.585)); +#223581 = LINE('',#223582,#223583); +#223582 = CARTESIAN_POINT('',(182.891126,-61.421557,1.585)); +#223583 = VECTOR('',#223584,1.); +#223584 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#223585 = ORIENTED_EDGE('',*,*,#223586,.T.); +#223586 = EDGE_CURVE('',#223579,#223587,#223589,.T.); +#223587 = VERTEX_POINT('',#223588); +#223588 = CARTESIAN_POINT('',(182.600411,-61.450256,1.585)); +#223589 = LINE('',#223590,#223591); +#223590 = CARTESIAN_POINT('',(182.825329,-61.451478,1.585)); +#223591 = VECTOR('',#223592,1.); +#223592 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#223593 = ORIENTED_EDGE('',*,*,#223594,.T.); +#223594 = EDGE_CURVE('',#223587,#223595,#223597,.T.); +#223595 = VERTEX_POINT('',#223596); +#223596 = CARTESIAN_POINT('',(182.4777,-61.388053,1.585)); +#223597 = LINE('',#223598,#223599); +#223598 = CARTESIAN_POINT('',(182.600411,-61.450256,1.585)); +#223599 = VECTOR('',#223600,1.); +#223600 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#223601 = ORIENTED_EDGE('',*,*,#223602,.T.); +#223602 = EDGE_CURVE('',#223595,#223603,#223605,.T.); +#223603 = VERTEX_POINT('',#223604); +#223604 = CARTESIAN_POINT('',(182.367384,-61.276728,1.585)); +#223605 = LINE('',#223606,#223607); +#223606 = CARTESIAN_POINT('',(182.4777,-61.388053,1.585)); +#223607 = VECTOR('',#223608,1.); +#223608 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#223609 = ORIENTED_EDGE('',*,*,#223610,.T.); +#223610 = EDGE_CURVE('',#223603,#223611,#223613,.T.); +#223611 = VERTEX_POINT('',#223612); +#223612 = CARTESIAN_POINT('',(182.356984,-61.253251,1.585)); +#223613 = LINE('',#223614,#223615); +#223614 = CARTESIAN_POINT('',(182.367384,-61.276728,1.585)); +#223615 = VECTOR('',#223616,1.); +#223616 = DIRECTION('',(-0.405025228745,0.91430550916,0.)); +#223617 = ORIENTED_EDGE('',*,*,#223618,.T.); +#223618 = EDGE_CURVE('',#223611,#223619,#223621,.T.); +#223619 = VERTEX_POINT('',#223620); +#223620 = CARTESIAN_POINT('',(182.307126,-61.044585,1.585)); +#223621 = LINE('',#223622,#223623); +#223622 = CARTESIAN_POINT('',(182.356984,-61.253251,1.585)); +#223623 = VECTOR('',#223624,1.); +#223624 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#223625 = ORIENTED_EDGE('',*,*,#223626,.T.); +#223626 = EDGE_CURVE('',#223619,#223627,#223629,.T.); +#223627 = VERTEX_POINT('',#223628); +#223628 = CARTESIAN_POINT('',(182.309365,-60.693062,1.585)); +#223629 = LINE('',#223630,#223631); +#223630 = CARTESIAN_POINT('',(182.307126,-61.044585,1.585)); +#223631 = VECTOR('',#223632,1.); +#223632 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#223633 = ORIENTED_EDGE('',*,*,#223634,.T.); +#223634 = EDGE_CURVE('',#223627,#223635,#223637,.T.); +#223635 = VERTEX_POINT('',#223636); +#223636 = CARTESIAN_POINT('',(182.361931,-60.48874,1.585)); +#223637 = LINE('',#223638,#223639); +#223638 = CARTESIAN_POINT('',(182.309365,-60.693062,1.585)); +#223639 = VECTOR('',#223640,1.); +#223640 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#223641 = ORIENTED_EDGE('',*,*,#223642,.T.); +#223642 = EDGE_CURVE('',#223635,#223643,#223645,.T.); +#223643 = VERTEX_POINT('',#223644); +#223644 = CARTESIAN_POINT('',(182.376712,-60.467743,1.585)); +#223645 = LINE('',#223646,#223647); +#223646 = CARTESIAN_POINT('',(182.361931,-60.48874,1.585)); +#223647 = VECTOR('',#223648,1.); +#223648 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#223649 = ORIENTED_EDGE('',*,*,#223650,.T.); +#223650 = EDGE_CURVE('',#223643,#223471,#223651,.T.); +#223651 = LINE('',#223652,#223653); +#223652 = CARTESIAN_POINT('',(182.376712,-60.467743,1.585)); +#223653 = VECTOR('',#223654,1.); +#223654 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#223655 = FACE_BOUND('',#223656,.F.); +#223656 = EDGE_LOOP('',(#223657,#223668,#223676,#223685,#223693,#223701, + #223709,#223717,#223725,#223733,#223742,#223750,#223758,#223766, + #223774,#223783)); +#223657 = ORIENTED_EDGE('',*,*,#223658,.T.); +#223658 = EDGE_CURVE('',#223659,#223661,#223663,.T.); +#223659 = VERTEX_POINT('',#223660); +#223660 = CARTESIAN_POINT('',(182.861508,-60.487177,1.585)); +#223661 = VERTEX_POINT('',#223662); +#223662 = CARTESIAN_POINT('',(182.56941,-60.487177,1.585)); +#223663 = CIRCLE('',#223664,0.252889603602); +#223664 = AXIS2_PLACEMENT_3D('',#223665,#223666,#223667); +#223665 = CARTESIAN_POINT('',(182.715459,-60.69363,1.585)); +#223666 = DIRECTION('',(0.,0.,1.)); +#223667 = DIRECTION('',(0.577520775547,0.816375988017,-0.)); +#223668 = ORIENTED_EDGE('',*,*,#223669,.T.); +#223669 = EDGE_CURVE('',#223661,#223670,#223672,.T.); +#223670 = VERTEX_POINT('',#223671); +#223671 = CARTESIAN_POINT('',(182.497467,-60.559119,1.585)); +#223672 = LINE('',#223673,#223674); +#223673 = CARTESIAN_POINT('',(182.56941,-60.487177,1.585)); +#223674 = VECTOR('',#223675,1.); +#223675 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#223676 = ORIENTED_EDGE('',*,*,#223677,.T.); +#223677 = EDGE_CURVE('',#223670,#223678,#223680,.T.); +#223678 = VERTEX_POINT('',#223679); +#223679 = CARTESIAN_POINT('',(182.497467,-61.196717,1.585)); +#223680 = CIRCLE('',#223681,0.985308713638); +#223681 = AXIS2_PLACEMENT_3D('',#223682,#223683,#223684); +#223682 = CARTESIAN_POINT('',(183.4297762077,-60.877918,1.585)); +#223683 = DIRECTION('',(0.,0.,1.)); +#223684 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#223685 = ORIENTED_EDGE('',*,*,#223686,.T.); +#223686 = EDGE_CURVE('',#223678,#223687,#223689,.T.); +#223687 = VERTEX_POINT('',#223688); +#223688 = CARTESIAN_POINT('',(182.56941,-61.268661,1.585)); +#223689 = LINE('',#223690,#223691); +#223690 = CARTESIAN_POINT('',(182.497467,-61.196717,1.585)); +#223691 = VECTOR('',#223692,1.); +#223692 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#223693 = ORIENTED_EDGE('',*,*,#223694,.T.); +#223694 = EDGE_CURVE('',#223687,#223695,#223697,.T.); +#223695 = VERTEX_POINT('',#223696); +#223696 = CARTESIAN_POINT('',(182.637926,-61.302919,1.585)); +#223697 = LINE('',#223698,#223699); +#223698 = CARTESIAN_POINT('',(182.56941,-61.268661,1.585)); +#223699 = VECTOR('',#223700,1.); +#223700 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#223701 = ORIENTED_EDGE('',*,*,#223702,.T.); +#223702 = EDGE_CURVE('',#223695,#223703,#223705,.T.); +#223703 = VERTEX_POINT('',#223704); +#223704 = CARTESIAN_POINT('',(182.772489,-61.302919,1.585)); +#223705 = LINE('',#223706,#223707); +#223706 = CARTESIAN_POINT('',(182.637926,-61.302919,1.585)); +#223707 = VECTOR('',#223708,1.); +#223708 = DIRECTION('',(1.,0.,0.)); +#223709 = ORIENTED_EDGE('',*,*,#223710,.T.); +#223710 = EDGE_CURVE('',#223703,#223711,#223713,.T.); +#223711 = VERTEX_POINT('',#223712); +#223712 = CARTESIAN_POINT('',(182.71865,-61.24908,1.585)); +#223713 = LINE('',#223714,#223715); +#223714 = CARTESIAN_POINT('',(182.772489,-61.302919,1.585)); +#223715 = VECTOR('',#223716,1.); +#223716 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223717 = ORIENTED_EDGE('',*,*,#223718,.T.); +#223718 = EDGE_CURVE('',#223711,#223719,#223721,.T.); +#223719 = VERTEX_POINT('',#223720); +#223720 = CARTESIAN_POINT('',(182.650135,-61.214823,1.585)); +#223721 = LINE('',#223722,#223723); +#223722 = CARTESIAN_POINT('',(182.71865,-61.24908,1.585)); +#223723 = VECTOR('',#223724,1.); +#223724 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#223725 = ORIENTED_EDGE('',*,*,#223726,.T.); +#223726 = EDGE_CURVE('',#223719,#223727,#223729,.T.); +#223727 = VERTEX_POINT('',#223728); +#223728 = CARTESIAN_POINT('',(182.55797,-61.213382,1.585)); +#223729 = LINE('',#223730,#223731); +#223730 = CARTESIAN_POINT('',(182.650135,-61.214823,1.585)); +#223731 = VECTOR('',#223732,1.); +#223732 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#223733 = ORIENTED_EDGE('',*,*,#223734,.T.); +#223734 = EDGE_CURVE('',#223727,#223735,#223737,.T.); +#223735 = VERTEX_POINT('',#223736); +#223736 = CARTESIAN_POINT('',(182.572602,-61.064823,1.585)); +#223737 = CIRCLE('',#223738,7.500006711464E-02); +#223738 = AXIS2_PLACEMENT_3D('',#223739,#223740,#223741); +#223739 = CARTESIAN_POINT('',(182.57260193288,-61.13982306711,1.585)); +#223740 = DIRECTION('',(0.,0.,-1.)); +#223741 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#223742 = ORIENTED_EDGE('',*,*,#223743,.T.); +#223743 = EDGE_CURVE('',#223735,#223744,#223746,.T.); +#223744 = VERTEX_POINT('',#223745); +#223745 = CARTESIAN_POINT('',(182.687649,-61.067486,1.585)); +#223746 = LINE('',#223747,#223748); +#223747 = CARTESIAN_POINT('',(182.572602,-61.064823,1.585)); +#223748 = VECTOR('',#223749,1.); +#223749 = DIRECTION('',(0.999732214371,-2.314086318526E-02,0.)); +#223750 = ORIENTED_EDGE('',*,*,#223751,.T.); +#223751 = EDGE_CURVE('',#223744,#223752,#223754,.T.); +#223752 = VERTEX_POINT('',#223753); +#223753 = CARTESIAN_POINT('',(182.810361,-61.12969,1.585)); +#223754 = LINE('',#223755,#223756); +#223755 = CARTESIAN_POINT('',(182.687649,-61.067486,1.585)); +#223756 = VECTOR('',#223757,1.); +#223757 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#223758 = ORIENTED_EDGE('',*,*,#223759,.T.); +#223759 = EDGE_CURVE('',#223752,#223760,#223762,.T.); +#223760 = VERTEX_POINT('',#223761); +#223761 = CARTESIAN_POINT('',(182.905934,-61.224233,1.585)); +#223762 = LINE('',#223763,#223764); +#223763 = CARTESIAN_POINT('',(182.810361,-61.12969,1.585)); +#223764 = VECTOR('',#223765,1.); +#223765 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#223766 = ORIENTED_EDGE('',*,*,#223767,.T.); +#223767 = EDGE_CURVE('',#223760,#223768,#223770,.T.); +#223768 = VERTEX_POINT('',#223769); +#223769 = CARTESIAN_POINT('',(182.93345,-61.196717,1.585)); +#223770 = LINE('',#223771,#223772); +#223771 = CARTESIAN_POINT('',(182.905934,-61.224233,1.585)); +#223772 = VECTOR('',#223773,1.); +#223773 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#223774 = ORIENTED_EDGE('',*,*,#223775,.T.); +#223775 = EDGE_CURVE('',#223768,#223776,#223778,.T.); +#223776 = VERTEX_POINT('',#223777); +#223777 = CARTESIAN_POINT('',(182.93345,-60.559119,1.585)); +#223778 = CIRCLE('',#223779,0.985282207896); +#223779 = AXIS2_PLACEMENT_3D('',#223780,#223781,#223782); +#223780 = CARTESIAN_POINT('',(182.00116880486,-60.877918,1.585)); +#223781 = DIRECTION('',(0.,-0.,1.)); +#223782 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#223783 = ORIENTED_EDGE('',*,*,#223784,.T.); +#223784 = EDGE_CURVE('',#223776,#223659,#223785,.T.); +#223785 = LINE('',#223786,#223787); +#223786 = CARTESIAN_POINT('',(182.93345,-60.559119,1.585)); +#223787 = VECTOR('',#223788,1.); +#223788 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223789 = PLANE('',#223790); +#223790 = AXIS2_PLACEMENT_3D('',#223791,#223792,#223793); +#223791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223792 = DIRECTION('',(0.,0.,1.)); +#223793 = DIRECTION('',(1.,0.,-0.)); +#223794 = SHELL_BASED_SURFACE_MODEL('',(#223795)); +#223795 = OPEN_SHELL('',(#223796)); +#223796 = ADVANCED_FACE('',(#223797,#223940),#224010,.T.); +#223797 = FACE_BOUND('',#223798,.F.); +#223798 = EDGE_LOOP('',(#223799,#223810,#223818,#223826,#223835,#223843, + #223851,#223859,#223867,#223875,#223883,#223891,#223900,#223908, + #223917,#223925,#223934)); +#223799 = ORIENTED_EDGE('',*,*,#223800,.T.); +#223800 = EDGE_CURVE('',#223801,#223803,#223805,.T.); +#223801 = VERTEX_POINT('',#223802); +#223802 = CARTESIAN_POINT('',(183.356984,-60.7883,1.585)); +#223803 = VERTEX_POINT('',#223804); +#223804 = CARTESIAN_POINT('',(183.58668,-60.358456,1.585)); +#223805 = CIRCLE('',#223806,0.610092147705); +#223806 = AXIS2_PLACEMENT_3D('',#223807,#223808,#223809); +#223807 = CARTESIAN_POINT('',(183.96513074024,-60.83698234817,1.585)); +#223808 = DIRECTION('',(0.,0.,-1.)); +#223809 = DIRECTION('',(-0.99681128913,7.979507417357E-02,0.)); +#223810 = ORIENTED_EDGE('',*,*,#223811,.T.); +#223811 = EDGE_CURVE('',#223803,#223812,#223814,.T.); +#223812 = VERTEX_POINT('',#223813); +#223813 = CARTESIAN_POINT('',(183.700827,-60.30436,1.585)); +#223814 = LINE('',#223815,#223816); +#223815 = CARTESIAN_POINT('',(183.58668,-60.358456,1.585)); +#223816 = VECTOR('',#223817,1.); +#223817 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#223818 = ORIENTED_EDGE('',*,*,#223819,.T.); +#223819 = EDGE_CURVE('',#223812,#223820,#223822,.T.); +#223820 = VERTEX_POINT('',#223821); +#223821 = CARTESIAN_POINT('',(183.920567,-60.30436,1.585)); +#223822 = LINE('',#223823,#223824); +#223823 = CARTESIAN_POINT('',(183.700827,-60.30436,1.585)); +#223824 = VECTOR('',#223825,1.); +#223825 = DIRECTION('',(1.,0.,0.)); +#223826 = ORIENTED_EDGE('',*,*,#223827,.T.); +#223827 = EDGE_CURVE('',#223820,#223828,#223830,.T.); +#223828 = VERTEX_POINT('',#223829); +#223829 = CARTESIAN_POINT('',(183.905935,-60.452919,1.585)); +#223830 = CIRCLE('',#223831,7.500006711464E-02); +#223831 = AXIS2_PLACEMENT_3D('',#223832,#223833,#223834); +#223832 = CARTESIAN_POINT('',(183.90593506711,-60.37791893288,1.585)); +#223833 = DIRECTION('',(0.,0.,-1.)); +#223834 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#223835 = ORIENTED_EDGE('',*,*,#223836,.T.); +#223836 = EDGE_CURVE('',#223828,#223837,#223839,.T.); +#223837 = VERTEX_POINT('',#223838); +#223838 = CARTESIAN_POINT('',(183.733164,-60.452919,1.585)); +#223839 = LINE('',#223840,#223841); +#223840 = CARTESIAN_POINT('',(183.905935,-60.452919,1.585)); +#223841 = VECTOR('',#223842,1.); +#223842 = DIRECTION('',(-1.,0.,0.)); +#223843 = ORIENTED_EDGE('',*,*,#223844,.T.); +#223844 = EDGE_CURVE('',#223837,#223845,#223847,.T.); +#223845 = VERTEX_POINT('',#223846); +#223846 = CARTESIAN_POINT('',(183.664648,-60.487177,1.585)); +#223847 = LINE('',#223848,#223849); +#223848 = CARTESIAN_POINT('',(183.733164,-60.452919,1.585)); +#223849 = VECTOR('',#223850,1.); +#223850 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#223851 = ORIENTED_EDGE('',*,*,#223852,.T.); +#223852 = EDGE_CURVE('',#223845,#223853,#223855,.T.); +#223853 = VERTEX_POINT('',#223854); +#223854 = CARTESIAN_POINT('',(183.630886,-60.520938,1.585)); +#223855 = LINE('',#223856,#223857); +#223856 = CARTESIAN_POINT('',(183.664648,-60.487177,1.585)); +#223857 = VECTOR('',#223858,1.); +#223858 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#223859 = ORIENTED_EDGE('',*,*,#223860,.T.); +#223860 = EDGE_CURVE('',#223853,#223861,#223863,.T.); +#223861 = VERTEX_POINT('',#223862); +#223862 = CARTESIAN_POINT('',(183.546974,-60.646807,1.585)); +#223863 = LINE('',#223864,#223865); +#223864 = CARTESIAN_POINT('',(183.630886,-60.520938,1.585)); +#223865 = VECTOR('',#223866,1.); +#223866 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#223867 = ORIENTED_EDGE('',*,*,#223868,.T.); +#223868 = EDGE_CURVE('',#223861,#223869,#223871,.T.); +#223869 = VERTEX_POINT('',#223870); +#223870 = CARTESIAN_POINT('',(183.52845,-60.720904,1.585)); +#223871 = LINE('',#223872,#223873); +#223872 = CARTESIAN_POINT('',(183.546974,-60.646807,1.585)); +#223873 = VECTOR('',#223874,1.); +#223874 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#223875 = ORIENTED_EDGE('',*,*,#223876,.T.); +#223876 = EDGE_CURVE('',#223869,#223877,#223879,.T.); +#223877 = VERTEX_POINT('',#223878); +#223878 = CARTESIAN_POINT('',(183.605589,-60.685312,1.585)); +#223879 = LINE('',#223880,#223881); +#223880 = CARTESIAN_POINT('',(183.52845,-60.720904,1.585)); +#223881 = VECTOR('',#223882,1.); +#223882 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#223883 = ORIENTED_EDGE('',*,*,#223884,.T.); +#223884 = EDGE_CURVE('',#223877,#223885,#223887,.T.); +#223885 = VERTEX_POINT('',#223886); +#223886 = CARTESIAN_POINT('',(183.830506,-60.686534,1.585)); +#223887 = LINE('',#223888,#223889); +#223888 = CARTESIAN_POINT('',(183.605589,-60.685312,1.585)); +#223889 = VECTOR('',#223890,1.); +#223890 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#223891 = ORIENTED_EDGE('',*,*,#223892,.T.); +#223892 = EDGE_CURVE('',#223885,#223893,#223895,.T.); +#223893 = VERTEX_POINT('',#223894); +#223894 = CARTESIAN_POINT('',(184.074732,-60.934715,1.585)); +#223895 = CIRCLE('',#223896,0.348625649748); +#223896 = AXIS2_PLACEMENT_3D('',#223897,#223898,#223899); +#223897 = CARTESIAN_POINT('',(183.73733404586,-61.02247868387,1.585)); +#223898 = DIRECTION('',(0.,0.,-1.)); +#223899 = DIRECTION('',(0.267255017532,0.96362583797,0.)); +#223900 = ORIENTED_EDGE('',*,*,#223901,.T.); +#223901 = EDGE_CURVE('',#223893,#223902,#223904,.T.); +#223902 = VERTEX_POINT('',#223903); +#223903 = CARTESIAN_POINT('',(184.07351,-61.207252,1.585)); +#223904 = LINE('',#223905,#223906); +#223905 = CARTESIAN_POINT('',(184.074732,-60.934715,1.585)); +#223906 = VECTOR('',#223907,1.); +#223907 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#223908 = ORIENTED_EDGE('',*,*,#223909,.T.); +#223909 = EDGE_CURVE('',#223902,#223910,#223912,.T.); +#223910 = VERTEX_POINT('',#223911); +#223911 = CARTESIAN_POINT('',(183.825329,-61.451478,1.585)); +#223912 = CIRCLE('',#223913,0.348635327447); +#223913 = AXIS2_PLACEMENT_3D('',#223914,#223915,#223916); +#223914 = CARTESIAN_POINT('',(183.73755748129,-61.11407208415,1.585)); +#223915 = DIRECTION('',(0.,0.,-1.)); +#223916 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#223917 = ORIENTED_EDGE('',*,*,#223918,.T.); +#223918 = EDGE_CURVE('',#223910,#223919,#223921,.T.); +#223919 = VERTEX_POINT('',#223920); +#223920 = CARTESIAN_POINT('',(183.600411,-61.450256,1.585)); +#223921 = LINE('',#223922,#223923); +#223922 = CARTESIAN_POINT('',(183.825329,-61.451478,1.585)); +#223923 = VECTOR('',#223924,1.); +#223924 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#223925 = ORIENTED_EDGE('',*,*,#223926,.T.); +#223926 = EDGE_CURVE('',#223919,#223927,#223929,.T.); +#223927 = VERTEX_POINT('',#223928); +#223928 = CARTESIAN_POINT('',(183.356186,-61.202074,1.585)); +#223929 = CIRCLE('',#223930,0.348628446662); +#223930 = AXIS2_PLACEMENT_3D('',#223931,#223932,#223933); +#223931 = CARTESIAN_POINT('',(183.69358661322,-61.11430942847,1.585)); +#223932 = DIRECTION('',(0.,0.,-1.)); +#223933 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#223934 = ORIENTED_EDGE('',*,*,#223935,.T.); +#223935 = EDGE_CURVE('',#223927,#223801,#223936,.T.); +#223936 = LINE('',#223937,#223938); +#223937 = CARTESIAN_POINT('',(183.356186,-61.202074,1.585)); +#223938 = VECTOR('',#223939,1.); +#223939 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#223940 = FACE_BOUND('',#223941,.F.); +#223941 = EDGE_LOOP('',(#223942,#223953,#223961,#223970,#223978,#223987, + #223995,#224004)); +#223942 = ORIENTED_EDGE('',*,*,#223943,.T.); +#223943 = EDGE_CURVE('',#223944,#223946,#223948,.T.); +#223944 = VERTEX_POINT('',#223945); +#223945 = CARTESIAN_POINT('',(183.861508,-60.868129,1.585)); +#223946 = VERTEX_POINT('',#223947); +#223947 = CARTESIAN_POINT('',(183.56941,-60.868129,1.585)); +#223948 = CIRCLE('',#223949,0.252889603602); +#223949 = AXIS2_PLACEMENT_3D('',#223950,#223951,#223952); +#223950 = CARTESIAN_POINT('',(183.715459,-61.074582,1.585)); +#223951 = DIRECTION('',(0.,0.,1.)); +#223952 = DIRECTION('',(0.577520775547,0.816375988017,-0.)); +#223953 = ORIENTED_EDGE('',*,*,#223954,.T.); +#223954 = EDGE_CURVE('',#223946,#223955,#223957,.T.); +#223955 = VERTEX_POINT('',#223956); +#223956 = CARTESIAN_POINT('',(183.539003,-60.898536,1.585)); +#223957 = LINE('',#223958,#223959); +#223958 = CARTESIAN_POINT('',(183.56941,-60.868129,1.585)); +#223959 = VECTOR('',#223960,1.); +#223960 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#223961 = ORIENTED_EDGE('',*,*,#223962,.T.); +#223962 = EDGE_CURVE('',#223955,#223963,#223965,.T.); +#223963 = VERTEX_POINT('',#223964); +#223964 = CARTESIAN_POINT('',(183.539003,-61.238253,1.585)); +#223965 = CIRCLE('',#223966,0.305621483548); +#223966 = AXIS2_PLACEMENT_3D('',#223967,#223968,#223969); +#223967 = CARTESIAN_POINT('',(183.793075,-61.0683945,1.585)); +#223968 = DIRECTION('',(0.,0.,1.)); +#223969 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#223970 = ORIENTED_EDGE('',*,*,#223971,.T.); +#223971 = EDGE_CURVE('',#223963,#223972,#223974,.T.); +#223972 = VERTEX_POINT('',#223973); +#223973 = CARTESIAN_POINT('',(183.56941,-61.268661,1.585)); +#223974 = LINE('',#223975,#223976); +#223975 = CARTESIAN_POINT('',(183.539003,-61.238253,1.585)); +#223976 = VECTOR('',#223977,1.); +#223977 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#223978 = ORIENTED_EDGE('',*,*,#223979,.T.); +#223979 = EDGE_CURVE('',#223972,#223980,#223982,.T.); +#223980 = VERTEX_POINT('',#223981); +#223981 = CARTESIAN_POINT('',(183.861507,-61.268661,1.585)); +#223982 = CIRCLE('',#223983,0.252888498466); +#223983 = AXIS2_PLACEMENT_3D('',#223984,#223985,#223986); +#223984 = CARTESIAN_POINT('',(183.7154585,-61.062209,1.585)); +#223985 = DIRECTION('',(0.,0.,1.)); +#223986 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#223987 = ORIENTED_EDGE('',*,*,#223988,.T.); +#223988 = EDGE_CURVE('',#223980,#223989,#223991,.T.); +#223989 = VERTEX_POINT('',#223990); +#223990 = CARTESIAN_POINT('',(183.891914,-61.238253,1.585)); +#223991 = LINE('',#223992,#223993); +#223992 = CARTESIAN_POINT('',(183.861507,-61.268661,1.585)); +#223993 = VECTOR('',#223994,1.); +#223994 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#223995 = ORIENTED_EDGE('',*,*,#223996,.T.); +#223996 = EDGE_CURVE('',#223989,#223997,#223999,.T.); +#223997 = VERTEX_POINT('',#223998); +#223998 = CARTESIAN_POINT('',(183.891915,-60.898536,1.585)); +#223999 = CIRCLE('',#224000,0.305616146029); +#224000 = AXIS2_PLACEMENT_3D('',#224001,#224002,#224003); +#224001 = CARTESIAN_POINT('',(183.63784892049,-61.06839375212,1.585)); +#224002 = DIRECTION('',(0.,-0.,1.)); +#224003 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#224004 = ORIENTED_EDGE('',*,*,#224005,.T.); +#224005 = EDGE_CURVE('',#223997,#223944,#224006,.T.); +#224006 = LINE('',#224007,#224008); +#224007 = CARTESIAN_POINT('',(183.891915,-60.898536,1.585)); +#224008 = VECTOR('',#224009,1.); +#224009 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#224010 = PLANE('',#224011); +#224011 = AXIS2_PLACEMENT_3D('',#224012,#224013,#224014); +#224012 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224013 = DIRECTION('',(0.,0.,1.)); +#224014 = DIRECTION('',(1.,0.,-0.)); +#224015 = SHELL_BASED_SURFACE_MODEL('',(#224016)); +#224016 = OPEN_SHELL('',(#224017)); +#224017 = ADVANCED_FACE('',(#224018),#224062,.T.); +#224018 = FACE_BOUND('',#224019,.F.); +#224019 = EDGE_LOOP('',(#224020,#224031,#224039,#224048,#224056)); +#224020 = ORIENTED_EDGE('',*,*,#224021,.T.); +#224021 = EDGE_CURVE('',#224022,#224024,#224026,.T.); +#224022 = VERTEX_POINT('',#224023); +#224023 = CARTESIAN_POINT('',(137.834567,-60.487039,1.585)); +#224024 = VERTEX_POINT('',#224025); +#224025 = CARTESIAN_POINT('',(137.95,-60.51,1.585)); +#224026 = CIRCLE('',#224027,6.000007318647E-02); +#224027 = AXIS2_PLACEMENT_3D('',#224028,#224029,#224030); +#224028 = CARTESIAN_POINT('',(137.88999992681,-60.50999982331,1.585)); +#224029 = DIRECTION('',(0.,0.,-1.)); +#224030 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#224031 = ORIENTED_EDGE('',*,*,#224032,.T.); +#224032 = EDGE_CURVE('',#224024,#224033,#224035,.T.); +#224033 = VERTEX_POINT('',#224034); +#224034 = CARTESIAN_POINT('',(137.95,-61.29,1.585)); +#224035 = LINE('',#224036,#224037); +#224036 = CARTESIAN_POINT('',(137.95,-60.51,1.585)); +#224037 = VECTOR('',#224038,1.); +#224038 = DIRECTION('',(0.,-1.,0.)); +#224039 = ORIENTED_EDGE('',*,*,#224040,.T.); +#224040 = EDGE_CURVE('',#224033,#224041,#224043,.T.); +#224041 = VERTEX_POINT('',#224042); +#224042 = CARTESIAN_POINT('',(137.83,-61.29,1.585)); +#224043 = CIRCLE('',#224044,6.000000000041E-02); +#224044 = AXIS2_PLACEMENT_3D('',#224045,#224046,#224047); +#224045 = CARTESIAN_POINT('',(137.89,-61.29000022558,1.585)); +#224046 = DIRECTION('',(0.,0.,-1.)); +#224047 = DIRECTION('',(0.999999999993,3.759794490533E-06,0.)); +#224048 = ORIENTED_EDGE('',*,*,#224049,.T.); +#224049 = EDGE_CURVE('',#224041,#224050,#224052,.T.); +#224050 = VERTEX_POINT('',#224051); +#224051 = CARTESIAN_POINT('',(137.83,-60.51,1.585)); +#224052 = LINE('',#224053,#224054); +#224053 = CARTESIAN_POINT('',(137.83,-61.29,1.585)); +#224054 = VECTOR('',#224055,1.); +#224055 = DIRECTION('',(0.,1.,0.)); +#224056 = ORIENTED_EDGE('',*,*,#224057,.T.); +#224057 = EDGE_CURVE('',#224050,#224022,#224058,.T.); +#224058 = LINE('',#224059,#224060); +#224059 = CARTESIAN_POINT('',(137.83,-60.51,1.585)); +#224060 = VECTOR('',#224061,1.); +#224061 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#224062 = PLANE('',#224063); +#224063 = AXIS2_PLACEMENT_3D('',#224064,#224065,#224066); +#224064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224065 = DIRECTION('',(0.,0.,1.)); +#224066 = DIRECTION('',(1.,0.,-0.)); +#224067 = SHELL_BASED_SURFACE_MODEL('',(#224068)); +#224068 = OPEN_SHELL('',(#224069)); +#224069 = ADVANCED_FACE('',(#224070),#224130,.T.); +#224070 = FACE_BOUND('',#224071,.F.); +#224071 = EDGE_LOOP('',(#224072,#224083,#224091,#224099,#224107,#224115, + #224124)); +#224072 = ORIENTED_EDGE('',*,*,#224073,.T.); +#224073 = EDGE_CURVE('',#224074,#224076,#224078,.T.); +#224074 = VERTEX_POINT('',#224075); +#224075 = CARTESIAN_POINT('',(97.65165,-61.3331,1.585)); +#224076 = VERTEX_POINT('',#224077); +#224077 = CARTESIAN_POINT('',(97.603126,-61.23781,1.585)); +#224078 = CIRCLE('',#224079,6.000027696173E-02); +#224079 = AXIS2_PLACEMENT_3D('',#224080,#224081,#224082); +#224080 = CARTESIAN_POINT('',(97.651650928468,-61.27309972304,1.585)); +#224081 = DIRECTION('',(0.,0.,-1.)); +#224082 = DIRECTION('',(-1.547440135436E-05,-0.99999999988,-0.)); +#224083 = ORIENTED_EDGE('',*,*,#224084,.T.); +#224084 = EDGE_CURVE('',#224076,#224085,#224087,.T.); +#224085 = VERTEX_POINT('',#224086); +#224086 = CARTESIAN_POINT('',(97.843126,-60.90781,1.585)); +#224087 = LINE('',#224088,#224089); +#224088 = CARTESIAN_POINT('',(97.603126,-61.23781,1.585)); +#224089 = VECTOR('',#224090,1.); +#224090 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#224091 = ORIENTED_EDGE('',*,*,#224092,.T.); +#224092 = EDGE_CURVE('',#224085,#224093,#224095,.T.); +#224093 = VERTEX_POINT('',#224094); +#224094 = CARTESIAN_POINT('',(97.882292,-60.883834,1.585)); +#224095 = LINE('',#224096,#224097); +#224096 = CARTESIAN_POINT('',(97.843126,-60.90781,1.585)); +#224097 = VECTOR('',#224098,1.); +#224098 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#224099 = ORIENTED_EDGE('',*,*,#224100,.T.); +#224100 = EDGE_CURVE('',#224093,#224101,#224103,.T.); +#224101 = VERTEX_POINT('',#224102); +#224102 = CARTESIAN_POINT('',(97.92694,-60.894576,1.585)); +#224103 = LINE('',#224104,#224105); +#224104 = CARTESIAN_POINT('',(97.882292,-60.883834,1.585)); +#224105 = VECTOR('',#224106,1.); +#224106 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#224107 = ORIENTED_EDGE('',*,*,#224108,.T.); +#224108 = EDGE_CURVE('',#224101,#224109,#224111,.T.); +#224109 = VERTEX_POINT('',#224110); +#224110 = CARTESIAN_POINT('',(98.180174,-61.23781,1.585)); +#224111 = LINE('',#224112,#224113); +#224112 = CARTESIAN_POINT('',(97.92694,-60.894576,1.585)); +#224113 = VECTOR('',#224114,1.); +#224114 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#224115 = ORIENTED_EDGE('',*,*,#224116,.T.); +#224116 = EDGE_CURVE('',#224109,#224117,#224119,.T.); +#224117 = VERTEX_POINT('',#224118); +#224118 = CARTESIAN_POINT('',(98.13165,-61.3331,1.585)); +#224119 = CIRCLE('',#224120,5.999941814203E-02); +#224120 = AXIS2_PLACEMENT_3D('',#224121,#224122,#224123); +#224121 = CARTESIAN_POINT('',(98.131650758052,-61.27310058186,1.585)); +#224122 = DIRECTION('',(0.,0.,-1.)); +#224123 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#224124 = ORIENTED_EDGE('',*,*,#224125,.T.); +#224125 = EDGE_CURVE('',#224117,#224074,#224126,.T.); +#224126 = LINE('',#224127,#224128); +#224127 = CARTESIAN_POINT('',(98.13165,-61.3331,1.585)); +#224128 = VECTOR('',#224129,1.); +#224129 = DIRECTION('',(-1.,0.,0.)); +#224130 = PLANE('',#224131); +#224131 = AXIS2_PLACEMENT_3D('',#224132,#224133,#224134); +#224132 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224133 = DIRECTION('',(0.,0.,1.)); +#224134 = DIRECTION('',(1.,0.,-0.)); +#224135 = SHELL_BASED_SURFACE_MODEL('',(#224136)); +#224136 = OPEN_SHELL('',(#224137)); +#224137 = ADVANCED_FACE('',(#224138),#224198,.T.); +#224138 = FACE_BOUND('',#224139,.F.); +#224139 = EDGE_LOOP('',(#224140,#224151,#224159,#224167,#224175,#224183, + #224192)); +#224140 = ORIENTED_EDGE('',*,*,#224141,.T.); +#224141 = EDGE_CURVE('',#224142,#224144,#224146,.T.); +#224142 = VERTEX_POINT('',#224143); +#224143 = CARTESIAN_POINT('',(137.11,-60.91,1.585)); +#224144 = VERTEX_POINT('',#224145); +#224145 = CARTESIAN_POINT('',(137.061476,-60.81471,1.585)); +#224146 = CIRCLE('',#224147,6.000027696175E-02); +#224147 = AXIS2_PLACEMENT_3D('',#224148,#224149,#224150); +#224148 = CARTESIAN_POINT('',(137.11000092846,-60.84999972304,1.585)); +#224149 = DIRECTION('',(0.,0.,-1.)); +#224150 = DIRECTION('',(-1.54744015912E-05,-0.99999999988,-0.)); +#224151 = ORIENTED_EDGE('',*,*,#224152,.T.); +#224152 = EDGE_CURVE('',#224144,#224153,#224155,.T.); +#224153 = VERTEX_POINT('',#224154); +#224154 = CARTESIAN_POINT('',(137.301476,-60.48471,1.585)); +#224155 = LINE('',#224156,#224157); +#224156 = CARTESIAN_POINT('',(137.061476,-60.81471,1.585)); +#224157 = VECTOR('',#224158,1.); +#224158 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#224159 = ORIENTED_EDGE('',*,*,#224160,.T.); +#224160 = EDGE_CURVE('',#224153,#224161,#224163,.T.); +#224161 = VERTEX_POINT('',#224162); +#224162 = CARTESIAN_POINT('',(137.340642,-60.460734,1.585)); +#224163 = LINE('',#224164,#224165); +#224164 = CARTESIAN_POINT('',(137.301476,-60.48471,1.585)); +#224165 = VECTOR('',#224166,1.); +#224166 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#224167 = ORIENTED_EDGE('',*,*,#224168,.T.); +#224168 = EDGE_CURVE('',#224161,#224169,#224171,.T.); +#224169 = VERTEX_POINT('',#224170); +#224170 = CARTESIAN_POINT('',(137.38529,-60.471476,1.585)); +#224171 = LINE('',#224172,#224173); +#224172 = CARTESIAN_POINT('',(137.340642,-60.460734,1.585)); +#224173 = VECTOR('',#224174,1.); +#224174 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#224175 = ORIENTED_EDGE('',*,*,#224176,.T.); +#224176 = EDGE_CURVE('',#224169,#224177,#224179,.T.); +#224177 = VERTEX_POINT('',#224178); +#224178 = CARTESIAN_POINT('',(137.638524,-60.81471,1.585)); +#224179 = LINE('',#224180,#224181); +#224180 = CARTESIAN_POINT('',(137.38529,-60.471476,1.585)); +#224181 = VECTOR('',#224182,1.); +#224182 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#224183 = ORIENTED_EDGE('',*,*,#224184,.T.); +#224184 = EDGE_CURVE('',#224177,#224185,#224187,.T.); +#224185 = VERTEX_POINT('',#224186); +#224186 = CARTESIAN_POINT('',(137.59,-60.91,1.585)); +#224187 = CIRCLE('',#224188,5.999941814201E-02); +#224188 = AXIS2_PLACEMENT_3D('',#224189,#224190,#224191); +#224189 = CARTESIAN_POINT('',(137.59000075805,-60.85000058186,1.585)); +#224190 = DIRECTION('',(0.,0.,-1.)); +#224191 = DIRECTION('',(0.80872854189,0.588182068354,0.)); +#224192 = ORIENTED_EDGE('',*,*,#224193,.T.); +#224193 = EDGE_CURVE('',#224185,#224142,#224194,.T.); +#224194 = LINE('',#224195,#224196); +#224195 = CARTESIAN_POINT('',(137.59,-60.91,1.585)); +#224196 = VECTOR('',#224197,1.); +#224197 = DIRECTION('',(-1.,0.,0.)); +#224198 = PLANE('',#224199); +#224199 = AXIS2_PLACEMENT_3D('',#224200,#224201,#224202); +#224200 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224201 = DIRECTION('',(0.,0.,1.)); +#224202 = DIRECTION('',(1.,0.,-0.)); +#224203 = SHELL_BASED_SURFACE_MODEL('',(#224204)); +#224204 = OPEN_SHELL('',(#224205)); +#224205 = ADVANCED_FACE('',(#224206),#224242,.T.); +#224206 = FACE_BOUND('',#224207,.F.); +#224207 = EDGE_LOOP('',(#224208,#224219,#224227,#224236)); +#224208 = ORIENTED_EDGE('',*,*,#224209,.T.); +#224209 = EDGE_CURVE('',#224210,#224212,#224214,.T.); +#224210 = VERTEX_POINT('',#224211); +#224211 = CARTESIAN_POINT('',(84.954392,-60.8606,1.585)); +#224212 = VERTEX_POINT('',#224213); +#224213 = CARTESIAN_POINT('',(84.954392,-60.7406,1.585)); +#224214 = CIRCLE('',#224215,6.000000000042E-02); +#224215 = AXIS2_PLACEMENT_3D('',#224216,#224217,#224218); +#224216 = CARTESIAN_POINT('',(84.954391774412,-60.8006,1.585)); +#224217 = DIRECTION('',(0.,0.,-1.)); +#224218 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#224219 = ORIENTED_EDGE('',*,*,#224220,.T.); +#224220 = EDGE_CURVE('',#224212,#224221,#224223,.T.); +#224221 = VERTEX_POINT('',#224222); +#224222 = CARTESIAN_POINT('',(85.428908,-60.7406,1.585)); +#224223 = LINE('',#224224,#224225); +#224224 = CARTESIAN_POINT('',(84.954392,-60.7406,1.585)); +#224225 = VECTOR('',#224226,1.); +#224226 = DIRECTION('',(1.,0.,0.)); +#224227 = ORIENTED_EDGE('',*,*,#224228,.T.); +#224228 = EDGE_CURVE('',#224221,#224229,#224231,.T.); +#224229 = VERTEX_POINT('',#224230); +#224230 = CARTESIAN_POINT('',(85.428908,-60.8606,1.585)); +#224231 = CIRCLE('',#224232,6.000000000042E-02); +#224232 = AXIS2_PLACEMENT_3D('',#224233,#224234,#224235); +#224233 = CARTESIAN_POINT('',(85.428908225588,-60.8006,1.585)); +#224234 = DIRECTION('',(0.,0.,-1.)); +#224235 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#224236 = ORIENTED_EDGE('',*,*,#224237,.T.); +#224237 = EDGE_CURVE('',#224229,#224210,#224238,.T.); +#224238 = LINE('',#224239,#224240); +#224239 = CARTESIAN_POINT('',(85.428908,-60.8606,1.585)); +#224240 = VECTOR('',#224241,1.); +#224241 = DIRECTION('',(-1.,0.,0.)); +#224242 = PLANE('',#224243); +#224243 = AXIS2_PLACEMENT_3D('',#224244,#224245,#224246); +#224244 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224245 = DIRECTION('',(0.,0.,1.)); +#224246 = DIRECTION('',(1.,0.,-0.)); +#224247 = SHELL_BASED_SURFACE_MODEL('',(#224248)); +#224248 = OPEN_SHELL('',(#224249)); +#224249 = ADVANCED_FACE('',(#224250),#224336,.T.); +#224250 = FACE_BOUND('',#224251,.F.); +#224251 = EDGE_LOOP('',(#224252,#224263,#224271,#224280,#224288,#224297, + #224305,#224313,#224321,#224330)); +#224252 = ORIENTED_EDGE('',*,*,#224253,.T.); +#224253 = EDGE_CURVE('',#224254,#224256,#224258,.T.); +#224254 = VERTEX_POINT('',#224255); +#224255 = CARTESIAN_POINT('',(98.37165,-59.7631,1.585)); +#224256 = VERTEX_POINT('',#224257); +#224257 = CARTESIAN_POINT('',(98.43165,-59.7031,1.585)); +#224258 = CIRCLE('',#224259,5.999932016258E-02); +#224259 = AXIS2_PLACEMENT_3D('',#224260,#224261,#224262); +#224260 = CARTESIAN_POINT('',(98.431649320159,-59.76309932015,1.585)); +#224261 = DIRECTION('',(0.,0.,-1.)); +#224262 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#224263 = ORIENTED_EDGE('',*,*,#224264,.T.); +#224264 = EDGE_CURVE('',#224256,#224265,#224267,.T.); +#224265 = VERTEX_POINT('',#224266); +#224266 = CARTESIAN_POINT('',(99.95165,-59.7031,1.585)); +#224267 = LINE('',#224268,#224269); +#224268 = CARTESIAN_POINT('',(98.43165,-59.7031,1.585)); +#224269 = VECTOR('',#224270,1.); +#224270 = DIRECTION('',(1.,0.,0.)); +#224271 = ORIENTED_EDGE('',*,*,#224272,.T.); +#224272 = EDGE_CURVE('',#224265,#224273,#224275,.T.); +#224273 = VERTEX_POINT('',#224274); +#224274 = CARTESIAN_POINT('',(100.01165,-59.7631,1.585)); +#224275 = CIRCLE('',#224276,5.999932016261E-02); +#224276 = AXIS2_PLACEMENT_3D('',#224277,#224278,#224279); +#224277 = CARTESIAN_POINT('',(99.951650679841,-59.76309932015,1.585)); +#224278 = DIRECTION('',(0.,0.,-1.)); +#224279 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#224280 = ORIENTED_EDGE('',*,*,#224281,.T.); +#224281 = EDGE_CURVE('',#224273,#224282,#224284,.T.); +#224282 = VERTEX_POINT('',#224283); +#224283 = CARTESIAN_POINT('',(100.01165,-60.7631,1.585)); +#224284 = LINE('',#224285,#224286); +#224285 = CARTESIAN_POINT('',(100.01165,-59.7631,1.585)); +#224286 = VECTOR('',#224287,1.); +#224287 = DIRECTION('',(0.,-1.,0.)); +#224288 = ORIENTED_EDGE('',*,*,#224289,.T.); +#224289 = EDGE_CURVE('',#224282,#224290,#224292,.T.); +#224290 = VERTEX_POINT('',#224291); +#224291 = CARTESIAN_POINT('',(99.89165,-60.7631,1.585)); +#224292 = CIRCLE('',#224293,6.000000000042E-02); +#224293 = AXIS2_PLACEMENT_3D('',#224294,#224295,#224296); +#224294 = CARTESIAN_POINT('',(99.95165,-60.76310022558,1.585)); +#224295 = DIRECTION('',(0.,0.,-1.)); +#224296 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#224297 = ORIENTED_EDGE('',*,*,#224298,.T.); +#224298 = EDGE_CURVE('',#224290,#224299,#224301,.T.); +#224299 = VERTEX_POINT('',#224300); +#224300 = CARTESIAN_POINT('',(99.89165,-59.8231,1.585)); +#224301 = LINE('',#224302,#224303); +#224302 = CARTESIAN_POINT('',(99.89165,-60.7631,1.585)); +#224303 = VECTOR('',#224304,1.); +#224304 = DIRECTION('',(0.,1.,0.)); +#224305 = ORIENTED_EDGE('',*,*,#224306,.T.); +#224306 = EDGE_CURVE('',#224299,#224307,#224309,.T.); +#224307 = VERTEX_POINT('',#224308); +#224308 = CARTESIAN_POINT('',(98.489661,-59.8231,1.585)); +#224309 = LINE('',#224310,#224311); +#224310 = CARTESIAN_POINT('',(99.89165,-59.8231,1.585)); +#224311 = VECTOR('',#224312,1.); +#224312 = DIRECTION('',(-1.,0.,0.)); +#224313 = ORIENTED_EDGE('',*,*,#224314,.T.); +#224314 = EDGE_CURVE('',#224307,#224315,#224317,.T.); +#224315 = VERTEX_POINT('',#224316); +#224316 = CARTESIAN_POINT('',(98.487083,-59.836061,1.585)); +#224317 = LINE('',#224318,#224319); +#224318 = CARTESIAN_POINT('',(98.489661,-59.8231,1.585)); +#224319 = VECTOR('',#224320,1.); +#224320 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#224321 = ORIENTED_EDGE('',*,*,#224322,.T.); +#224322 = EDGE_CURVE('',#224315,#224323,#224325,.T.); +#224323 = VERTEX_POINT('',#224324); +#224324 = CARTESIAN_POINT('',(98.37165,-59.8131,1.585)); +#224325 = CIRCLE('',#224326,6.000007318647E-02); +#224326 = AXIS2_PLACEMENT_3D('',#224327,#224328,#224329); +#224327 = CARTESIAN_POINT('',(98.431650073186,-59.81310017668,1.585)); +#224328 = DIRECTION('',(-0.,0.,-1.)); +#224329 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#224330 = ORIENTED_EDGE('',*,*,#224331,.T.); +#224331 = EDGE_CURVE('',#224323,#224254,#224332,.T.); +#224332 = LINE('',#224333,#224334); +#224333 = CARTESIAN_POINT('',(98.37165,-59.8131,1.585)); +#224334 = VECTOR('',#224335,1.); +#224335 = DIRECTION('',(0.,1.,0.)); +#224336 = PLANE('',#224337); +#224337 = AXIS2_PLACEMENT_3D('',#224338,#224339,#224340); +#224338 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224339 = DIRECTION('',(0.,0.,1.)); +#224340 = DIRECTION('',(1.,0.,-0.)); +#224341 = SHELL_BASED_SURFACE_MODEL('',(#224342)); +#224342 = OPEN_SHELL('',(#224343)); +#224343 = ADVANCED_FACE('',(#224344,#224446),#224514,.T.); +#224344 = FACE_BOUND('',#224345,.F.); +#224345 = EDGE_LOOP('',(#224346,#224357,#224365,#224373,#224382,#224390, + #224399,#224407,#224415,#224424,#224432,#224440)); +#224346 = ORIENTED_EDGE('',*,*,#224347,.T.); +#224347 = EDGE_CURVE('',#224348,#224350,#224352,.T.); +#224348 = VERTEX_POINT('',#224349); +#224349 = CARTESIAN_POINT('',(85.74522,-59.618892,1.585)); +#224350 = VERTEX_POINT('',#224351); +#224351 = CARTESIAN_POINT('',(85.832084,-59.62242,1.585)); +#224352 = CIRCLE('',#224353,7.226649079678E-02); +#224353 = AXIS2_PLACEMENT_3D('',#224354,#224355,#224356); +#224354 = CARTESIAN_POINT('',(85.786309129967,-59.67834054153,1.585)); +#224355 = DIRECTION('',(0.,0.,-1.)); +#224356 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#224357 = ORIENTED_EDGE('',*,*,#224358,.T.); +#224358 = EDGE_CURVE('',#224350,#224359,#224361,.T.); +#224359 = VERTEX_POINT('',#224360); +#224360 = CARTESIAN_POINT('',(85.867494,-59.607693,1.585)); +#224361 = LINE('',#224362,#224363); +#224362 = CARTESIAN_POINT('',(85.832084,-59.62242,1.585)); +#224363 = VECTOR('',#224364,1.); +#224364 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#224365 = ORIENTED_EDGE('',*,*,#224366,.T.); +#224366 = EDGE_CURVE('',#224359,#224367,#224369,.T.); +#224367 = VERTEX_POINT('',#224368); +#224368 = CARTESIAN_POINT('',(86.087234,-59.607693,1.585)); +#224369 = LINE('',#224370,#224371); +#224370 = CARTESIAN_POINT('',(85.867494,-59.607693,1.585)); +#224371 = VECTOR('',#224372,1.); +#224372 = DIRECTION('',(1.,0.,0.)); +#224373 = ORIENTED_EDGE('',*,*,#224374,.T.); +#224374 = EDGE_CURVE('',#224367,#224375,#224377,.T.); +#224375 = VERTEX_POINT('',#224376); +#224376 = CARTESIAN_POINT('',(86.336637,-59.857096,1.585)); +#224377 = CIRCLE('',#224378,0.347870264855); +#224378 = AXIS2_PLACEMENT_3D('',#224379,#224380,#224381); +#224379 = CARTESIAN_POINT('',(85.999906265028,-59.94442373497,1.585)); +#224380 = DIRECTION('',(0.,0.,-1.)); +#224381 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#224382 = ORIENTED_EDGE('',*,*,#224383,.T.); +#224383 = EDGE_CURVE('',#224375,#224384,#224386,.T.); +#224384 = VERTEX_POINT('',#224385); +#224385 = CARTESIAN_POINT('',(86.335415,-60.177252,1.585)); +#224386 = LINE('',#224387,#224388); +#224387 = CARTESIAN_POINT('',(86.336637,-59.857096,1.585)); +#224388 = VECTOR('',#224389,1.); +#224389 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#224390 = ORIENTED_EDGE('',*,*,#224391,.T.); +#224391 = EDGE_CURVE('',#224384,#224392,#224394,.T.); +#224392 = VERTEX_POINT('',#224393); +#224393 = CARTESIAN_POINT('',(86.087234,-60.421478,1.585)); +#224394 = CIRCLE('',#224395,0.348635327447); +#224395 = AXIS2_PLACEMENT_3D('',#224396,#224397,#224398); +#224396 = CARTESIAN_POINT('',(85.999462481291,-60.08407208415,1.585)); +#224397 = DIRECTION('',(0.,0.,-1.)); +#224398 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#224399 = ORIENTED_EDGE('',*,*,#224400,.T.); +#224400 = EDGE_CURVE('',#224392,#224401,#224403,.T.); +#224401 = VERTEX_POINT('',#224402); +#224402 = CARTESIAN_POINT('',(85.861888,-60.420092,1.585)); +#224403 = LINE('',#224404,#224405); +#224404 = CARTESIAN_POINT('',(86.087234,-60.421478,1.585)); +#224405 = VECTOR('',#224406,1.); +#224406 = DIRECTION('',(-0.999981085954,6.150425501834E-03,0.)); +#224407 = ORIENTED_EDGE('',*,*,#224408,.T.); +#224408 = EDGE_CURVE('',#224401,#224409,#224411,.T.); +#224409 = VERTEX_POINT('',#224410); +#224410 = CARTESIAN_POINT('',(85.860447,-60.695884,1.585)); +#224411 = LINE('',#224412,#224413); +#224412 = CARTESIAN_POINT('',(85.861888,-60.420092,1.585)); +#224413 = VECTOR('',#224414,1.); +#224414 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#224415 = ORIENTED_EDGE('',*,*,#224416,.T.); +#224416 = EDGE_CURVE('',#224409,#224417,#224419,.T.); +#224417 = VERTEX_POINT('',#224418); +#224418 = CARTESIAN_POINT('',(85.711888,-60.681252,1.585)); +#224419 = CIRCLE('',#224420,7.500006711464E-02); +#224420 = AXIS2_PLACEMENT_3D('',#224421,#224422,#224423); +#224421 = CARTESIAN_POINT('',(85.786888067115,-60.68125206711,1.585)); +#224422 = DIRECTION('',(-0.,0.,-1.)); +#224423 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#224424 = ORIENTED_EDGE('',*,*,#224425,.T.); +#224425 = EDGE_CURVE('',#224417,#224426,#224428,.T.); +#224426 = VERTEX_POINT('',#224427); +#224427 = CARTESIAN_POINT('',(85.713329,-59.66662,1.585)); +#224428 = LINE('',#224429,#224430); +#224429 = CARTESIAN_POINT('',(85.711888,-60.681252,1.585)); +#224430 = VECTOR('',#224431,1.); +#224431 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#224432 = ORIENTED_EDGE('',*,*,#224433,.T.); +#224433 = EDGE_CURVE('',#224426,#224434,#224436,.T.); +#224434 = VERTEX_POINT('',#224435); +#224435 = CARTESIAN_POINT('',(85.724528,-59.639584,1.585)); +#224436 = LINE('',#224437,#224438); +#224437 = CARTESIAN_POINT('',(85.713329,-59.66662,1.585)); +#224438 = VECTOR('',#224439,1.); +#224439 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#224440 = ORIENTED_EDGE('',*,*,#224441,.T.); +#224441 = EDGE_CURVE('',#224434,#224348,#224442,.T.); +#224442 = LINE('',#224443,#224444); +#224443 = CARTESIAN_POINT('',(85.724528,-59.639584,1.585)); +#224444 = VECTOR('',#224445,1.); +#224445 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#224446 = FACE_BOUND('',#224447,.F.); +#224447 = EDGE_LOOP('',(#224448,#224459,#224467,#224475,#224483,#224491, + #224499,#224508)); +#224448 = ORIENTED_EDGE('',*,*,#224449,.T.); +#224449 = EDGE_CURVE('',#224450,#224452,#224454,.T.); +#224450 = VERTEX_POINT('',#224451); +#224451 = CARTESIAN_POINT('',(86.188078,-59.889433,1.585)); +#224452 = VERTEX_POINT('',#224453); +#224453 = CARTESIAN_POINT('',(86.054897,-59.756252,1.585)); +#224454 = CIRCLE('',#224455,0.18686440374); +#224455 = AXIS2_PLACEMENT_3D('',#224456,#224457,#224458); +#224456 = CARTESIAN_POINT('',(86.007361,-59.936969,1.585)); +#224457 = DIRECTION('',(0.,0.,1.)); +#224458 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#224459 = ORIENTED_EDGE('',*,*,#224460,.T.); +#224460 = EDGE_CURVE('',#224452,#224461,#224463,.T.); +#224461 = VERTEX_POINT('',#224462); +#224462 = CARTESIAN_POINT('',(85.899831,-59.756252,1.585)); +#224463 = LINE('',#224464,#224465); +#224464 = CARTESIAN_POINT('',(86.054897,-59.756252,1.585)); +#224465 = VECTOR('',#224466,1.); +#224466 = DIRECTION('',(-1.,0.,0.)); +#224467 = ORIENTED_EDGE('',*,*,#224468,.T.); +#224468 = EDGE_CURVE('',#224461,#224469,#224471,.T.); +#224469 = VERTEX_POINT('',#224470); +#224470 = CARTESIAN_POINT('',(85.861888,-59.775223,1.585)); +#224471 = LINE('',#224472,#224473); +#224472 = CARTESIAN_POINT('',(85.899831,-59.756252,1.585)); +#224473 = VECTOR('',#224474,1.); +#224474 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#224475 = ORIENTED_EDGE('',*,*,#224476,.T.); +#224476 = EDGE_CURVE('',#224469,#224477,#224479,.T.); +#224477 = VERTEX_POINT('',#224478); +#224478 = CARTESIAN_POINT('',(85.861888,-60.253947,1.585)); +#224479 = LINE('',#224480,#224481); +#224480 = CARTESIAN_POINT('',(85.861888,-59.775223,1.585)); +#224481 = VECTOR('',#224482,1.); +#224482 = DIRECTION('',(0.,-1.,0.)); +#224483 = ORIENTED_EDGE('',*,*,#224484,.T.); +#224484 = EDGE_CURVE('',#224477,#224485,#224487,.T.); +#224485 = VERTEX_POINT('',#224486); +#224486 = CARTESIAN_POINT('',(85.899831,-60.272919,1.585)); +#224487 = LINE('',#224488,#224489); +#224488 = CARTESIAN_POINT('',(85.861888,-60.253947,1.585)); +#224489 = VECTOR('',#224490,1.); +#224490 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#224491 = ORIENTED_EDGE('',*,*,#224492,.T.); +#224492 = EDGE_CURVE('',#224485,#224493,#224495,.T.); +#224493 = VERTEX_POINT('',#224494); +#224494 = CARTESIAN_POINT('',(86.054897,-60.272919,1.585)); +#224495 = LINE('',#224496,#224497); +#224496 = CARTESIAN_POINT('',(85.899831,-60.272919,1.585)); +#224497 = VECTOR('',#224498,1.); +#224498 = DIRECTION('',(1.,0.,0.)); +#224499 = ORIENTED_EDGE('',*,*,#224500,.T.); +#224500 = EDGE_CURVE('',#224493,#224501,#224503,.T.); +#224501 = VERTEX_POINT('',#224502); +#224502 = CARTESIAN_POINT('',(86.188078,-60.139737,1.585)); +#224503 = CIRCLE('',#224504,0.186867760544); +#224504 = AXIS2_PLACEMENT_3D('',#224505,#224506,#224507); +#224505 = CARTESIAN_POINT('',(86.007357969282,-60.09219932622,1.585)); +#224506 = DIRECTION('',(0.,0.,1.)); +#224507 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#224508 = ORIENTED_EDGE('',*,*,#224509,.T.); +#224509 = EDGE_CURVE('',#224501,#224450,#224510,.T.); +#224510 = LINE('',#224511,#224512); +#224511 = CARTESIAN_POINT('',(86.188078,-60.139737,1.585)); +#224512 = VECTOR('',#224513,1.); +#224513 = DIRECTION('',(0.,1.,0.)); +#224514 = PLANE('',#224515); +#224515 = AXIS2_PLACEMENT_3D('',#224516,#224517,#224518); +#224516 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224517 = DIRECTION('',(0.,0.,1.)); +#224518 = DIRECTION('',(1.,0.,-0.)); +#224519 = SHELL_BASED_SURFACE_MODEL('',(#224520)); +#224520 = OPEN_SHELL('',(#224521)); +#224521 = ADVANCED_FACE('',(#224522),#224566,.T.); +#224522 = FACE_BOUND('',#224523,.F.); +#224523 = EDGE_LOOP('',(#224524,#224535,#224543,#224552,#224560)); +#224524 = ORIENTED_EDGE('',*,*,#224525,.T.); +#224525 = EDGE_CURVE('',#224526,#224528,#224530,.T.); +#224526 = VERTEX_POINT('',#224527); +#224527 = CARTESIAN_POINT('',(144.634567,-59.787039,1.585)); +#224528 = VERTEX_POINT('',#224529); +#224529 = CARTESIAN_POINT('',(144.75,-59.81,1.585)); +#224530 = CIRCLE('',#224531,6.000007318647E-02); +#224531 = AXIS2_PLACEMENT_3D('',#224532,#224533,#224534); +#224532 = CARTESIAN_POINT('',(144.68999992681,-59.80999982331,1.585)); +#224533 = DIRECTION('',(0.,0.,-1.)); +#224534 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#224535 = ORIENTED_EDGE('',*,*,#224536,.T.); +#224536 = EDGE_CURVE('',#224528,#224537,#224539,.T.); +#224537 = VERTEX_POINT('',#224538); +#224538 = CARTESIAN_POINT('',(144.75,-60.59,1.585)); +#224539 = LINE('',#224540,#224541); +#224540 = CARTESIAN_POINT('',(144.75,-59.81,1.585)); +#224541 = VECTOR('',#224542,1.); +#224542 = DIRECTION('',(0.,-1.,0.)); +#224543 = ORIENTED_EDGE('',*,*,#224544,.T.); +#224544 = EDGE_CURVE('',#224537,#224545,#224547,.T.); +#224545 = VERTEX_POINT('',#224546); +#224546 = CARTESIAN_POINT('',(144.63,-60.59,1.585)); +#224547 = CIRCLE('',#224548,6.000000000043E-02); +#224548 = AXIS2_PLACEMENT_3D('',#224549,#224550,#224551); +#224549 = CARTESIAN_POINT('',(144.69,-60.59000022558,1.585)); +#224550 = DIRECTION('',(0.,0.,-1.)); +#224551 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#224552 = ORIENTED_EDGE('',*,*,#224553,.T.); +#224553 = EDGE_CURVE('',#224545,#224554,#224556,.T.); +#224554 = VERTEX_POINT('',#224555); +#224555 = CARTESIAN_POINT('',(144.63,-59.81,1.585)); +#224556 = LINE('',#224557,#224558); +#224557 = CARTESIAN_POINT('',(144.63,-60.59,1.585)); +#224558 = VECTOR('',#224559,1.); +#224559 = DIRECTION('',(0.,1.,0.)); +#224560 = ORIENTED_EDGE('',*,*,#224561,.T.); +#224561 = EDGE_CURVE('',#224554,#224526,#224562,.T.); +#224562 = LINE('',#224563,#224564); +#224563 = CARTESIAN_POINT('',(144.63,-59.81,1.585)); +#224564 = VECTOR('',#224565,1.); +#224565 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#224566 = PLANE('',#224567); +#224567 = AXIS2_PLACEMENT_3D('',#224568,#224569,#224570); +#224568 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224569 = DIRECTION('',(0.,0.,1.)); +#224570 = DIRECTION('',(1.,0.,-0.)); +#224571 = SHELL_BASED_SURFACE_MODEL('',(#224572)); +#224572 = OPEN_SHELL('',(#224573)); +#224573 = ADVANCED_FACE('',(#224574,#224685),#224737,.T.); +#224574 = FACE_BOUND('',#224575,.F.); +#224575 = EDGE_LOOP('',(#224576,#224587,#224595,#224604,#224612,#224621, + #224629,#224637,#224646,#224654,#224662,#224670,#224679)); +#224576 = ORIENTED_EDGE('',*,*,#224577,.T.); +#224577 = EDGE_CURVE('',#224578,#224580,#224582,.T.); +#224578 = VERTEX_POINT('',#224579); +#224579 = CARTESIAN_POINT('',(84.094281,-59.333287,1.585)); +#224580 = VERTEX_POINT('',#224581); +#224581 = CARTESIAN_POINT('',(84.16784,-59.272919,1.585)); +#224582 = CIRCLE('',#224583,7.500074938988E-02); +#224583 = AXIS2_PLACEMENT_3D('',#224584,#224585,#224586); +#224584 = CARTESIAN_POINT('',(84.16784046611,-59.34791974938,1.585)); +#224585 = DIRECTION('',(0.,0.,-1.)); +#224586 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#224587 = ORIENTED_EDGE('',*,*,#224588,.T.); +#224588 = EDGE_CURVE('',#224580,#224589,#224591,.T.); +#224589 = VERTEX_POINT('',#224590); +#224590 = CARTESIAN_POINT('',(84.563424,-59.27436,1.585)); +#224591 = LINE('',#224592,#224593); +#224592 = CARTESIAN_POINT('',(84.16784,-59.272919,1.585)); +#224593 = VECTOR('',#224594,1.); +#224594 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#224595 = ORIENTED_EDGE('',*,*,#224596,.T.); +#224596 = EDGE_CURVE('',#224589,#224597,#224599,.T.); +#224597 = VERTEX_POINT('',#224598); +#224598 = CARTESIAN_POINT('',(84.812827,-59.523763,1.585)); +#224599 = CIRCLE('',#224600,0.347870264855); +#224600 = AXIS2_PLACEMENT_3D('',#224601,#224602,#224603); +#224601 = CARTESIAN_POINT('',(84.476096265028,-59.61109073497,1.585)); +#224602 = DIRECTION('',(0.,0.,-1.)); +#224603 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#224604 = ORIENTED_EDGE('',*,*,#224605,.T.); +#224605 = EDGE_CURVE('',#224597,#224606,#224608,.T.); +#224606 = VERTEX_POINT('',#224607); +#224607 = CARTESIAN_POINT('',(84.811605,-59.701062,1.585)); +#224608 = LINE('',#224609,#224610); +#224609 = CARTESIAN_POINT('',(84.812827,-59.523763,1.585)); +#224610 = VECTOR('',#224611,1.); +#224611 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#224612 = ORIENTED_EDGE('',*,*,#224613,.T.); +#224613 = EDGE_CURVE('',#224606,#224614,#224616,.T.); +#224614 = VERTEX_POINT('',#224615); +#224615 = CARTESIAN_POINT('',(84.563424,-59.945287,1.585)); +#224616 = CIRCLE('',#224617,0.348632345849); +#224617 = AXIS2_PLACEMENT_3D('',#224618,#224619,#224620); +#224618 = CARTESIAN_POINT('',(84.475655194037,-59.6078834593,1.585)); +#224619 = DIRECTION('',(0.,0.,-1.)); +#224620 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#224621 = ORIENTED_EDGE('',*,*,#224622,.T.); +#224622 = EDGE_CURVE('',#224614,#224623,#224625,.T.); +#224623 = VERTEX_POINT('',#224624); +#224624 = CARTESIAN_POINT('',(84.549907,-59.946618,1.585)); +#224625 = LINE('',#224626,#224627); +#224626 = CARTESIAN_POINT('',(84.563424,-59.945287,1.585)); +#224627 = VECTOR('',#224628,1.); +#224628 = DIRECTION('',(-0.995186940545,-9.799465989986E-02,0.)); +#224629 = ORIENTED_EDGE('',*,*,#224630,.T.); +#224630 = EDGE_CURVE('',#224623,#224631,#224633,.T.); +#224631 = VERTEX_POINT('',#224632); +#224632 = CARTESIAN_POINT('',(84.807921,-60.317723,1.585)); +#224633 = LINE('',#224634,#224635); +#224634 = CARTESIAN_POINT('',(84.549907,-59.946618,1.585)); +#224635 = VECTOR('',#224636,1.); +#224636 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#224637 = ORIENTED_EDGE('',*,*,#224638,.T.); +#224638 = EDGE_CURVE('',#224631,#224639,#224641,.T.); +#224639 = VERTEX_POINT('',#224640); +#224640 = CARTESIAN_POINT('',(84.677826,-60.390929,1.585)); +#224641 = CIRCLE('',#224642,7.500005951702E-02); +#224642 = AXIS2_PLACEMENT_3D('',#224643,#224644,#224645); +#224643 = CARTESIAN_POINT('',(84.739268062942,-60.34791874739,1.585)); +#224644 = DIRECTION('',(0.,0.,-1.)); +#224645 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#224646 = ORIENTED_EDGE('',*,*,#224647,.T.); +#224647 = EDGE_CURVE('',#224639,#224648,#224650,.T.); +#224648 = VERTEX_POINT('',#224649); +#224649 = CARTESIAN_POINT('',(84.366886,-59.946728,1.585)); +#224650 = LINE('',#224651,#224652); +#224651 = CARTESIAN_POINT('',(84.677826,-60.390929,1.585)); +#224652 = VECTOR('',#224653,1.); +#224653 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#224654 = ORIENTED_EDGE('',*,*,#224655,.T.); +#224655 = EDGE_CURVE('',#224648,#224656,#224658,.T.); +#224656 = VERTEX_POINT('',#224657); +#224657 = CARTESIAN_POINT('',(84.24284,-59.946728,1.585)); +#224658 = LINE('',#224659,#224660); +#224659 = CARTESIAN_POINT('',(84.366886,-59.946728,1.585)); +#224660 = VECTOR('',#224661,1.); +#224661 = DIRECTION('',(-1.,0.,0.)); +#224662 = ORIENTED_EDGE('',*,*,#224663,.T.); +#224663 = EDGE_CURVE('',#224656,#224664,#224666,.T.); +#224664 = VERTEX_POINT('',#224665); +#224665 = CARTESIAN_POINT('',(84.241399,-60.362551,1.585)); +#224666 = LINE('',#224667,#224668); +#224667 = CARTESIAN_POINT('',(84.24284,-59.946728,1.585)); +#224668 = VECTOR('',#224669,1.); +#224669 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#224670 = ORIENTED_EDGE('',*,*,#224671,.T.); +#224671 = EDGE_CURVE('',#224664,#224672,#224674,.T.); +#224672 = VERTEX_POINT('',#224673); +#224673 = CARTESIAN_POINT('',(84.09284,-60.347919,1.585)); +#224674 = CIRCLE('',#224675,7.500006711465E-02); +#224675 = AXIS2_PLACEMENT_3D('',#224676,#224677,#224678); +#224676 = CARTESIAN_POINT('',(84.167840067115,-60.34791906711,1.585)); +#224677 = DIRECTION('',(-0.,0.,-1.)); +#224678 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#224679 = ORIENTED_EDGE('',*,*,#224680,.T.); +#224680 = EDGE_CURVE('',#224672,#224578,#224681,.T.); +#224681 = LINE('',#224682,#224683); +#224682 = CARTESIAN_POINT('',(84.09284,-60.347919,1.585)); +#224683 = VECTOR('',#224684,1.); +#224684 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#224685 = FACE_BOUND('',#224686,.F.); +#224686 = EDGE_LOOP('',(#224687,#224698,#224706,#224714,#224722,#224731) + ); +#224687 = ORIENTED_EDGE('',*,*,#224688,.T.); +#224688 = EDGE_CURVE('',#224689,#224691,#224693,.T.); +#224689 = VERTEX_POINT('',#224690); +#224690 = CARTESIAN_POINT('',(84.664268,-59.5561,1.585)); +#224691 = VERTEX_POINT('',#224692); +#224692 = CARTESIAN_POINT('',(84.531087,-59.422919,1.585)); +#224693 = CIRCLE('',#224694,0.18686440374); +#224694 = AXIS2_PLACEMENT_3D('',#224695,#224696,#224697); +#224695 = CARTESIAN_POINT('',(84.483551,-59.603636,1.585)); +#224696 = DIRECTION('',(0.,0.,1.)); +#224697 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#224698 = ORIENTED_EDGE('',*,*,#224699,.T.); +#224699 = EDGE_CURVE('',#224691,#224700,#224702,.T.); +#224700 = VERTEX_POINT('',#224701); +#224701 = CARTESIAN_POINT('',(84.24284,-59.422919,1.585)); +#224702 = LINE('',#224703,#224704); +#224703 = CARTESIAN_POINT('',(84.531087,-59.422919,1.585)); +#224704 = VECTOR('',#224705,1.); +#224705 = DIRECTION('',(-1.,0.,0.)); +#224706 = ORIENTED_EDGE('',*,*,#224707,.T.); +#224707 = EDGE_CURVE('',#224700,#224708,#224710,.T.); +#224708 = VERTEX_POINT('',#224709); +#224709 = CARTESIAN_POINT('',(84.24284,-59.796728,1.585)); +#224710 = LINE('',#224711,#224712); +#224711 = CARTESIAN_POINT('',(84.24284,-59.422919,1.585)); +#224712 = VECTOR('',#224713,1.); +#224713 = DIRECTION('',(0.,-1.,0.)); +#224714 = ORIENTED_EDGE('',*,*,#224715,.T.); +#224715 = EDGE_CURVE('',#224708,#224716,#224718,.T.); +#224716 = VERTEX_POINT('',#224717); +#224717 = CARTESIAN_POINT('',(84.531087,-59.796728,1.585)); +#224718 = LINE('',#224719,#224720); +#224719 = CARTESIAN_POINT('',(84.24284,-59.796728,1.585)); +#224720 = VECTOR('',#224721,1.); +#224721 = DIRECTION('',(1.,0.,0.)); +#224722 = ORIENTED_EDGE('',*,*,#224723,.T.); +#224723 = EDGE_CURVE('',#224716,#224724,#224726,.T.); +#224724 = VERTEX_POINT('',#224725); +#224725 = CARTESIAN_POINT('',(84.664268,-59.663547,1.585)); +#224726 = CIRCLE('',#224727,0.18686440374); +#224727 = AXIS2_PLACEMENT_3D('',#224728,#224729,#224730); +#224728 = CARTESIAN_POINT('',(84.483551,-59.616011,1.585)); +#224729 = DIRECTION('',(0.,0.,1.)); +#224730 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#224731 = ORIENTED_EDGE('',*,*,#224732,.T.); +#224732 = EDGE_CURVE('',#224724,#224689,#224733,.T.); +#224733 = LINE('',#224734,#224735); +#224734 = CARTESIAN_POINT('',(84.664268,-59.663547,1.585)); +#224735 = VECTOR('',#224736,1.); +#224736 = DIRECTION('',(0.,1.,0.)); +#224737 = PLANE('',#224738); +#224738 = AXIS2_PLACEMENT_3D('',#224739,#224740,#224741); +#224739 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224740 = DIRECTION('',(0.,0.,1.)); +#224741 = DIRECTION('',(1.,0.,-0.)); +#224742 = SHELL_BASED_SURFACE_MODEL('',(#224743)); +#224743 = OPEN_SHELL('',(#224744)); +#224744 = ADVANCED_FACE('',(#224745),#224847,.T.); +#224745 = FACE_BOUND('',#224746,.F.); +#224746 = EDGE_LOOP('',(#224747,#224758,#224766,#224774,#224782,#224791, + #224799,#224808,#224816,#224825,#224833,#224841)); +#224747 = ORIENTED_EDGE('',*,*,#224748,.T.); +#224748 = EDGE_CURVE('',#224749,#224751,#224753,.T.); +#224749 = VERTEX_POINT('',#224750); +#224750 = CARTESIAN_POINT('',(85.126172,-59.618892,1.585)); +#224751 = VERTEX_POINT('',#224752); +#224752 = CARTESIAN_POINT('',(85.2302,-59.639584,1.585)); +#224753 = CIRCLE('',#224754,7.499946135253E-02); +#224754 = AXIS2_PLACEMENT_3D('',#224755,#224756,#224757); +#224755 = CARTESIAN_POINT('',(85.167840133572,-59.68125132847,1.585)); +#224756 = DIRECTION('',(0.,0.,-1.)); +#224757 = DIRECTION('',(-0.55557910444,0.83146368454,0.)); +#224758 = ORIENTED_EDGE('',*,*,#224759,.T.); +#224759 = EDGE_CURVE('',#224751,#224760,#224762,.T.); +#224760 = VERTEX_POINT('',#224761); +#224761 = CARTESIAN_POINT('',(85.237705,-59.657704,1.585)); +#224762 = LINE('',#224763,#224764); +#224763 = CARTESIAN_POINT('',(85.2302,-59.639584,1.585)); +#224764 = VECTOR('',#224765,1.); +#224765 = DIRECTION('',(0.382659506909,-0.923889442397,0.)); +#224766 = ORIENTED_EDGE('',*,*,#224767,.T.); +#224767 = EDGE_CURVE('',#224760,#224768,#224770,.T.); +#224768 = VERTEX_POINT('',#224769); +#224769 = CARTESIAN_POINT('',(85.343684,-59.607693,1.585)); +#224770 = LINE('',#224771,#224772); +#224771 = CARTESIAN_POINT('',(85.237705,-59.657704,1.585)); +#224772 = VECTOR('',#224773,1.); +#224773 = DIRECTION('',(0.904362746847,0.426764598011,0.)); +#224774 = ORIENTED_EDGE('',*,*,#224775,.T.); +#224775 = EDGE_CURVE('',#224768,#224776,#224778,.T.); +#224776 = VERTEX_POINT('',#224777); +#224777 = CARTESIAN_POINT('',(85.468186,-59.607693,1.585)); +#224778 = LINE('',#224779,#224780); +#224779 = CARTESIAN_POINT('',(85.343684,-59.607693,1.585)); +#224780 = VECTOR('',#224781,1.); +#224781 = DIRECTION('',(1.,0.,0.)); +#224782 = ORIENTED_EDGE('',*,*,#224783,.T.); +#224783 = EDGE_CURVE('',#224776,#224784,#224786,.T.); +#224784 = VERTEX_POINT('',#224785); +#224785 = CARTESIAN_POINT('',(85.453554,-59.756252,1.585)); +#224786 = CIRCLE('',#224787,7.500006711465E-02); +#224787 = AXIS2_PLACEMENT_3D('',#224788,#224789,#224790); +#224788 = CARTESIAN_POINT('',(85.453554067115,-59.68125193288,1.585)); +#224789 = DIRECTION('',(0.,0.,-1.)); +#224790 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#224791 = ORIENTED_EDGE('',*,*,#224792,.T.); +#224792 = EDGE_CURVE('',#224784,#224793,#224795,.T.); +#224793 = VERTEX_POINT('',#224794); +#224794 = CARTESIAN_POINT('',(85.376021,-59.756252,1.585)); +#224795 = LINE('',#224796,#224797); +#224796 = CARTESIAN_POINT('',(85.453554,-59.756252,1.585)); +#224797 = VECTOR('',#224798,1.); +#224798 = DIRECTION('',(-1.,0.,0.)); +#224799 = ORIENTED_EDGE('',*,*,#224800,.T.); +#224800 = EDGE_CURVE('',#224793,#224801,#224803,.T.); +#224801 = VERTEX_POINT('',#224802); +#224802 = CARTESIAN_POINT('',(85.24284,-59.889433,1.585)); +#224803 = CIRCLE('',#224804,0.18686440374); +#224804 = AXIS2_PLACEMENT_3D('',#224805,#224806,#224807); +#224805 = CARTESIAN_POINT('',(85.423557,-59.936969,1.585)); +#224806 = DIRECTION('',(0.,0.,1.)); +#224807 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#224808 = ORIENTED_EDGE('',*,*,#224809,.T.); +#224809 = EDGE_CURVE('',#224801,#224810,#224812,.T.); +#224810 = VERTEX_POINT('',#224811); +#224811 = CARTESIAN_POINT('',(85.241399,-60.362551,1.585)); +#224812 = LINE('',#224813,#224814); +#224813 = CARTESIAN_POINT('',(85.24284,-59.889433,1.585)); +#224814 = VECTOR('',#224815,1.); +#224815 = DIRECTION('',(-3.045737672744E-03,-0.99999536173,0.)); +#224816 = ORIENTED_EDGE('',*,*,#224817,.T.); +#224817 = EDGE_CURVE('',#224810,#224818,#224820,.T.); +#224818 = VERTEX_POINT('',#224819); +#224819 = CARTESIAN_POINT('',(85.09284,-60.347919,1.585)); +#224820 = CIRCLE('',#224821,7.500006711465E-02); +#224821 = AXIS2_PLACEMENT_3D('',#224822,#224823,#224824); +#224822 = CARTESIAN_POINT('',(85.167840067115,-60.34791906711,1.585)); +#224823 = DIRECTION('',(-0.,0.,-1.)); +#224824 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#224825 = ORIENTED_EDGE('',*,*,#224826,.T.); +#224826 = EDGE_CURVE('',#224818,#224827,#224829,.T.); +#224827 = VERTEX_POINT('',#224828); +#224828 = CARTESIAN_POINT('',(85.094281,-59.66662,1.585)); +#224829 = LINE('',#224830,#224831); +#224830 = CARTESIAN_POINT('',(85.09284,-60.347919,1.585)); +#224831 = VECTOR('',#224832,1.); +#224832 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#224833 = ORIENTED_EDGE('',*,*,#224834,.T.); +#224834 = EDGE_CURVE('',#224827,#224835,#224837,.T.); +#224835 = VERTEX_POINT('',#224836); +#224836 = CARTESIAN_POINT('',(85.10548,-59.639584,1.585)); +#224837 = LINE('',#224838,#224839); +#224838 = CARTESIAN_POINT('',(85.094281,-59.66662,1.585)); +#224839 = VECTOR('',#224840,1.); +#224840 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#224841 = ORIENTED_EDGE('',*,*,#224842,.T.); +#224842 = EDGE_CURVE('',#224835,#224749,#224843,.T.); +#224843 = LINE('',#224844,#224845); +#224844 = CARTESIAN_POINT('',(85.10548,-59.639584,1.585)); +#224845 = VECTOR('',#224846,1.); +#224846 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#224847 = PLANE('',#224848); +#224848 = AXIS2_PLACEMENT_3D('',#224849,#224850,#224851); +#224849 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224850 = DIRECTION('',(0.,0.,1.)); +#224851 = DIRECTION('',(1.,0.,-0.)); +#224852 = SHELL_BASED_SURFACE_MODEL('',(#224853)); +#224853 = OPEN_SHELL('',(#224854)); +#224854 = ADVANCED_FACE('',(#224855),#225096,.T.); +#224855 = FACE_BOUND('',#224856,.F.); +#224856 = EDGE_LOOP('',(#224857,#224868,#224876,#224884,#224892,#224900, + #224909,#224917,#224926,#224934,#224942,#224950,#224958,#224966, + #224974,#224983,#224991,#224999,#225007,#225015,#225024,#225032, + #225040,#225048,#225057,#225065,#225073,#225081,#225090)); +#224857 = ORIENTED_EDGE('',*,*,#224858,.T.); +#224858 = EDGE_CURVE('',#224859,#224861,#224863,.T.); +#224859 = VERTEX_POINT('',#224860); +#224860 = CARTESIAN_POINT('',(152.858882,-59.792856,1.585)); +#224861 = VERTEX_POINT('',#224862); +#224862 = CARTESIAN_POINT('',(152.923882,-59.727856,1.585)); +#224863 = CIRCLE('',#224864,6.500103935393E-02); +#224864 = AXIS2_PLACEMENT_3D('',#224865,#224866,#224867); +#224865 = CARTESIAN_POINT('',(152.92388303934,-59.79285703934,1.585)); +#224866 = DIRECTION('',(0.,0.,-1.)); +#224867 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#224868 = ORIENTED_EDGE('',*,*,#224869,.T.); +#224869 = EDGE_CURVE('',#224861,#224870,#224872,.T.); +#224870 = VERTEX_POINT('',#224871); +#224871 = CARTESIAN_POINT('',(153.223882,-59.727856,1.585)); +#224872 = LINE('',#224873,#224874); +#224873 = CARTESIAN_POINT('',(152.923882,-59.727856,1.585)); +#224874 = VECTOR('',#224875,1.); +#224875 = DIRECTION('',(1.,0.,0.)); +#224876 = ORIENTED_EDGE('',*,*,#224877,.T.); +#224877 = EDGE_CURVE('',#224870,#224878,#224880,.T.); +#224878 = VERTEX_POINT('',#224879); +#224879 = CARTESIAN_POINT('',(153.248756,-59.732804,1.585)); +#224880 = LINE('',#224881,#224882); +#224881 = CARTESIAN_POINT('',(153.223882,-59.727856,1.585)); +#224882 = VECTOR('',#224883,1.); +#224883 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#224884 = ORIENTED_EDGE('',*,*,#224885,.T.); +#224885 = EDGE_CURVE('',#224878,#224886,#224888,.T.); +#224886 = VERTEX_POINT('',#224887); +#224887 = CARTESIAN_POINT('',(153.269843,-59.746894,1.585)); +#224888 = LINE('',#224889,#224890); +#224889 = CARTESIAN_POINT('',(153.248756,-59.732804,1.585)); +#224890 = VECTOR('',#224891,1.); +#224891 = DIRECTION('',(0.831467480074,-0.555573424111,0.)); +#224892 = ORIENTED_EDGE('',*,*,#224893,.T.); +#224893 = EDGE_CURVE('',#224886,#224894,#224896,.T.); +#224894 = VERTEX_POINT('',#224895); +#224895 = CARTESIAN_POINT('',(153.321003,-59.802175,1.585)); +#224896 = LINE('',#224897,#224898); +#224897 = CARTESIAN_POINT('',(153.269843,-59.746894,1.585)); +#224898 = VECTOR('',#224899,1.); +#224899 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#224900 = ORIENTED_EDGE('',*,*,#224901,.T.); +#224901 = EDGE_CURVE('',#224894,#224902,#224904,.T.); +#224902 = VERTEX_POINT('',#224903); +#224903 = CARTESIAN_POINT('',(153.320999,-60.212113,1.585)); +#224904 = CIRCLE('',#224905,0.409312568567); +#224905 = AXIS2_PLACEMENT_3D('',#224906,#224907,#224908); +#224906 = CARTESIAN_POINT('',(152.96670664807,-60.00714054294,1.585)); +#224907 = DIRECTION('',(0.,0.,-1.)); +#224908 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#224909 = ORIENTED_EDGE('',*,*,#224910,.T.); +#224910 = EDGE_CURVE('',#224902,#224911,#224913,.T.); +#224911 = VERTEX_POINT('',#224912); +#224912 = CARTESIAN_POINT('',(153.218322,-60.316036,1.585)); +#224913 = LINE('',#224914,#224915); +#224914 = CARTESIAN_POINT('',(153.320999,-60.212113,1.585)); +#224915 = VECTOR('',#224916,1.); +#224916 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#224917 = ORIENTED_EDGE('',*,*,#224918,.T.); +#224918 = EDGE_CURVE('',#224911,#224919,#224921,.T.); +#224919 = VERTEX_POINT('',#224920); +#224920 = CARTESIAN_POINT('',(152.779546,-60.413058,1.585)); +#224921 = CIRCLE('',#224922,0.675422176573); +#224922 = AXIS2_PLACEMENT_3D('',#224923,#224924,#224925); +#224923 = CARTESIAN_POINT('',(152.86141275007,-59.74261564465,1.585)); +#224924 = DIRECTION('',(0.,0.,-1.)); +#224925 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#224926 = ORIENTED_EDGE('',*,*,#224927,.T.); +#224927 = EDGE_CURVE('',#224919,#224928,#224930,.T.); +#224928 = VERTEX_POINT('',#224929); +#224929 = CARTESIAN_POINT('',(152.594813,-60.36528,1.585)); +#224930 = LINE('',#224931,#224932); +#224931 = CARTESIAN_POINT('',(152.779546,-60.413058,1.585)); +#224932 = VECTOR('',#224933,1.); +#224933 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#224934 = ORIENTED_EDGE('',*,*,#224935,.T.); +#224935 = EDGE_CURVE('',#224928,#224936,#224938,.T.); +#224936 = VERTEX_POINT('',#224937); +#224937 = CARTESIAN_POINT('',(152.492206,-60.310247,1.585)); +#224938 = LINE('',#224939,#224940); +#224939 = CARTESIAN_POINT('',(152.594813,-60.36528,1.585)); +#224940 = VECTOR('',#224941,1.); +#224941 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#224942 = ORIENTED_EDGE('',*,*,#224943,.T.); +#224943 = EDGE_CURVE('',#224936,#224944,#224946,.T.); +#224944 = VERTEX_POINT('',#224945); +#224945 = CARTESIAN_POINT('',(152.398191,-60.212109,1.585)); +#224946 = LINE('',#224947,#224948); +#224947 = CARTESIAN_POINT('',(152.492206,-60.310247,1.585)); +#224948 = VECTOR('',#224949,1.); +#224949 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#224950 = ORIENTED_EDGE('',*,*,#224951,.T.); +#224951 = EDGE_CURVE('',#224944,#224952,#224954,.T.); +#224952 = VERTEX_POINT('',#224953); +#224953 = CARTESIAN_POINT('',(152.34663,-60.060221,1.585)); +#224954 = LINE('',#224955,#224956); +#224955 = CARTESIAN_POINT('',(152.398191,-60.212109,1.585)); +#224956 = VECTOR('',#224957,1.); +#224957 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#224958 = ORIENTED_EDGE('',*,*,#224959,.T.); +#224959 = EDGE_CURVE('',#224952,#224960,#224962,.T.); +#224960 = VERTEX_POINT('',#224961); +#224961 = CARTESIAN_POINT('',(152.347512,-59.906771,1.585)); +#224962 = LINE('',#224963,#224964); +#224963 = CARTESIAN_POINT('',(152.34663,-60.060221,1.585)); +#224964 = VECTOR('',#224965,1.); +#224965 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#224966 = ORIENTED_EDGE('',*,*,#224967,.T.); +#224967 = EDGE_CURVE('',#224960,#224968,#224970,.T.); +#224968 = VERTEX_POINT('',#224969); +#224969 = CARTESIAN_POINT('',(152.394316,-59.806644,1.585)); +#224970 = LINE('',#224971,#224972); +#224971 = CARTESIAN_POINT('',(152.347512,-59.906771,1.585)); +#224972 = VECTOR('',#224973,1.); +#224973 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#224974 = ORIENTED_EDGE('',*,*,#224975,.T.); +#224975 = EDGE_CURVE('',#224968,#224976,#224978,.T.); +#224976 = VERTEX_POINT('',#224977); +#224977 = CARTESIAN_POINT('',(152.510592,-59.864782,1.585)); +#224978 = CIRCLE('',#224979,6.500026004258E-02); +#224979 = AXIS2_PLACEMENT_3D('',#224980,#224981,#224982); +#224980 = CARTESIAN_POINT('',(152.45245365279,-59.8357136944,1.585)); +#224981 = DIRECTION('',(0.,0.,-1.)); +#224982 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#224983 = ORIENTED_EDGE('',*,*,#224984,.T.); +#224984 = EDGE_CURVE('',#224976,#224985,#224987,.T.); +#224985 = VERTEX_POINT('',#224986); +#224986 = CARTESIAN_POINT('',(152.474597,-59.936772,1.585)); +#224987 = LINE('',#224988,#224989); +#224988 = CARTESIAN_POINT('',(152.510592,-59.864782,1.585)); +#224989 = VECTOR('',#224990,1.); +#224990 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#224991 = ORIENTED_EDGE('',*,*,#224992,.T.); +#224992 = EDGE_CURVE('',#224985,#224993,#224995,.T.); +#224993 = VERTEX_POINT('',#224994); +#224994 = CARTESIAN_POINT('',(152.474597,-60.039452,1.585)); +#224995 = LINE('',#224996,#224997); +#224996 = CARTESIAN_POINT('',(152.474597,-59.936772,1.585)); +#224997 = VECTOR('',#224998,1.); +#224998 = DIRECTION('',(0.,-1.,0.)); +#224999 = ORIENTED_EDGE('',*,*,#225000,.T.); +#225000 = EDGE_CURVE('',#224993,#225001,#225003,.T.); +#225001 = VERTEX_POINT('',#225002); +#225002 = CARTESIAN_POINT('',(152.509265,-60.143457,1.585)); +#225003 = LINE('',#225004,#225005); +#225004 = CARTESIAN_POINT('',(152.474597,-60.039452,1.585)); +#225005 = VECTOR('',#225006,1.); +#225006 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#225007 = ORIENTED_EDGE('',*,*,#225008,.T.); +#225008 = EDGE_CURVE('',#225001,#225009,#225011,.T.); +#225009 = VERTEX_POINT('',#225010); +#225010 = CARTESIAN_POINT('',(152.576669,-60.210863,1.585)); +#225011 = LINE('',#225012,#225013); +#225012 = CARTESIAN_POINT('',(152.509265,-60.143457,1.585)); +#225013 = VECTOR('',#225014,1.); +#225014 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#225015 = ORIENTED_EDGE('',*,*,#225016,.T.); +#225016 = EDGE_CURVE('',#225009,#225017,#225019,.T.); +#225017 = VERTEX_POINT('',#225018); +#225018 = CARTESIAN_POINT('',(152.915881,-60.284999,1.585)); +#225019 = CIRCLE('',#225020,0.553317785495); +#225020 = AXIS2_PLACEMENT_3D('',#225021,#225022,#225023); +#225021 = CARTESIAN_POINT('',(152.8584500839,-59.73466976979,1.585)); +#225022 = DIRECTION('',(0.,0.,1.)); +#225023 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#225024 = ORIENTED_EDGE('',*,*,#225025,.T.); +#225025 = EDGE_CURVE('',#225017,#225026,#225028,.T.); +#225026 = VERTEX_POINT('',#225027); +#225027 = CARTESIAN_POINT('',(153.072622,-60.245813,1.585)); +#225028 = LINE('',#225029,#225030); +#225029 = CARTESIAN_POINT('',(152.915881,-60.284999,1.585)); +#225030 = VECTOR('',#225031,1.); +#225031 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#225032 = ORIENTED_EDGE('',*,*,#225033,.T.); +#225033 = EDGE_CURVE('',#225026,#225034,#225036,.T.); +#225034 = VERTEX_POINT('',#225035); +#225035 = CARTESIAN_POINT('',(153.142522,-60.210864,1.585)); +#225036 = LINE('',#225037,#225038); +#225037 = CARTESIAN_POINT('',(153.072622,-60.245813,1.585)); +#225038 = VECTOR('',#225039,1.); +#225039 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#225040 = ORIENTED_EDGE('',*,*,#225041,.T.); +#225041 = EDGE_CURVE('',#225034,#225042,#225044,.T.); +#225042 = VERTEX_POINT('',#225043); +#225043 = CARTESIAN_POINT('',(153.209928,-60.143457,1.585)); +#225044 = LINE('',#225045,#225046); +#225045 = CARTESIAN_POINT('',(153.142522,-60.210864,1.585)); +#225046 = VECTOR('',#225047,1.); +#225047 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#225048 = ORIENTED_EDGE('',*,*,#225049,.T.); +#225049 = EDGE_CURVE('',#225042,#225050,#225052,.T.); +#225050 = VERTEX_POINT('',#225051); +#225051 = CARTESIAN_POINT('',(153.209928,-59.870825,1.585)); +#225052 = CIRCLE('',#225053,0.272194686174); +#225053 = AXIS2_PLACEMENT_3D('',#225054,#225055,#225056); +#225054 = CARTESIAN_POINT('',(152.97432686391,-60.007141,1.585)); +#225055 = DIRECTION('',(0.,-0.,1.)); +#225056 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#225057 = ORIENTED_EDGE('',*,*,#225058,.T.); +#225058 = EDGE_CURVE('',#225050,#225059,#225061,.T.); +#225059 = VERTEX_POINT('',#225060); +#225060 = CARTESIAN_POINT('',(153.196959,-59.857856,1.585)); +#225061 = LINE('',#225062,#225063); +#225062 = CARTESIAN_POINT('',(153.209928,-59.870825,1.585)); +#225063 = VECTOR('',#225064,1.); +#225064 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#225065 = ORIENTED_EDGE('',*,*,#225066,.T.); +#225066 = EDGE_CURVE('',#225059,#225067,#225069,.T.); +#225067 = VERTEX_POINT('',#225068); +#225068 = CARTESIAN_POINT('',(152.988882,-59.857856,1.585)); +#225069 = LINE('',#225070,#225071); +#225070 = CARTESIAN_POINT('',(153.196959,-59.857856,1.585)); +#225071 = VECTOR('',#225072,1.); +#225072 = DIRECTION('',(-1.,0.,0.)); +#225073 = ORIENTED_EDGE('',*,*,#225074,.T.); +#225074 = EDGE_CURVE('',#225067,#225075,#225077,.T.); +#225075 = VERTEX_POINT('',#225076); +#225076 = CARTESIAN_POINT('',(152.988882,-59.964285,1.585)); +#225077 = LINE('',#225078,#225079); +#225078 = CARTESIAN_POINT('',(152.988882,-59.857856,1.585)); +#225079 = VECTOR('',#225080,1.); +#225080 = DIRECTION('',(0.,-1.,0.)); +#225081 = ORIENTED_EDGE('',*,*,#225082,.T.); +#225082 = EDGE_CURVE('',#225075,#225083,#225085,.T.); +#225083 = VERTEX_POINT('',#225084); +#225084 = CARTESIAN_POINT('',(152.858882,-59.964285,1.585)); +#225085 = CIRCLE('',#225086,6.500000000091E-02); +#225086 = AXIS2_PLACEMENT_3D('',#225087,#225088,#225089); +#225087 = CARTESIAN_POINT('',(152.923882,-59.96428465513,1.585)); +#225088 = DIRECTION('',(-0.,0.,-1.)); +#225089 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#225090 = ORIENTED_EDGE('',*,*,#225091,.T.); +#225091 = EDGE_CURVE('',#225083,#224859,#225092,.T.); +#225092 = LINE('',#225093,#225094); +#225093 = CARTESIAN_POINT('',(152.858882,-59.964285,1.585)); +#225094 = VECTOR('',#225095,1.); +#225095 = DIRECTION('',(0.,1.,0.)); +#225096 = PLANE('',#225097); +#225097 = AXIS2_PLACEMENT_3D('',#225098,#225099,#225100); +#225098 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225099 = DIRECTION('',(0.,0.,1.)); +#225100 = DIRECTION('',(1.,0.,-0.)); +#225101 = SHELL_BASED_SURFACE_MODEL('',(#225102)); +#225102 = OPEN_SHELL('',(#225103)); +#225103 = ADVANCED_FACE('',(#225104),#225190,.T.); +#225104 = FACE_BOUND('',#225105,.F.); +#225105 = EDGE_LOOP('',(#225106,#225117,#225125,#225134,#225142,#225151, + #225159,#225167,#225175,#225184)); +#225106 = ORIENTED_EDGE('',*,*,#225107,.T.); +#225107 = EDGE_CURVE('',#225108,#225110,#225112,.T.); +#225108 = VERTEX_POINT('',#225109); +#225109 = CARTESIAN_POINT('',(137.83,-59.34,1.585)); +#225110 = VERTEX_POINT('',#225111); +#225111 = CARTESIAN_POINT('',(137.89,-59.28,1.585)); +#225112 = CIRCLE('',#225113,5.999932016253E-02); +#225113 = AXIS2_PLACEMENT_3D('',#225114,#225115,#225116); +#225114 = CARTESIAN_POINT('',(137.88999932015,-59.33999932015,1.585)); +#225115 = DIRECTION('',(0.,0.,-1.)); +#225116 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#225117 = ORIENTED_EDGE('',*,*,#225118,.T.); +#225118 = EDGE_CURVE('',#225110,#225119,#225121,.T.); +#225119 = VERTEX_POINT('',#225120); +#225120 = CARTESIAN_POINT('',(139.41,-59.28,1.585)); +#225121 = LINE('',#225122,#225123); +#225122 = CARTESIAN_POINT('',(137.89,-59.28,1.585)); +#225123 = VECTOR('',#225124,1.); +#225124 = DIRECTION('',(1.,0.,0.)); +#225125 = ORIENTED_EDGE('',*,*,#225126,.T.); +#225126 = EDGE_CURVE('',#225119,#225127,#225129,.T.); +#225127 = VERTEX_POINT('',#225128); +#225128 = CARTESIAN_POINT('',(139.47,-59.34,1.585)); +#225129 = CIRCLE('',#225130,5.999932016259E-02); +#225130 = AXIS2_PLACEMENT_3D('',#225131,#225132,#225133); +#225131 = CARTESIAN_POINT('',(139.41000067984,-59.33999932015,1.585)); +#225132 = DIRECTION('',(0.,0.,-1.)); +#225133 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#225134 = ORIENTED_EDGE('',*,*,#225135,.T.); +#225135 = EDGE_CURVE('',#225127,#225136,#225138,.T.); +#225136 = VERTEX_POINT('',#225137); +#225137 = CARTESIAN_POINT('',(139.47,-60.34,1.585)); +#225138 = LINE('',#225139,#225140); +#225139 = CARTESIAN_POINT('',(139.47,-59.34,1.585)); +#225140 = VECTOR('',#225141,1.); +#225141 = DIRECTION('',(0.,-1.,0.)); +#225142 = ORIENTED_EDGE('',*,*,#225143,.T.); +#225143 = EDGE_CURVE('',#225136,#225144,#225146,.T.); +#225144 = VERTEX_POINT('',#225145); +#225145 = CARTESIAN_POINT('',(139.35,-60.34,1.585)); +#225146 = CIRCLE('',#225147,6.000000000043E-02); +#225147 = AXIS2_PLACEMENT_3D('',#225148,#225149,#225150); +#225148 = CARTESIAN_POINT('',(139.41,-60.34000022558,1.585)); +#225149 = DIRECTION('',(0.,0.,-1.)); +#225150 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#225151 = ORIENTED_EDGE('',*,*,#225152,.T.); +#225152 = EDGE_CURVE('',#225144,#225153,#225155,.T.); +#225153 = VERTEX_POINT('',#225154); +#225154 = CARTESIAN_POINT('',(139.35,-59.4,1.585)); +#225155 = LINE('',#225156,#225157); +#225156 = CARTESIAN_POINT('',(139.35,-60.34,1.585)); +#225157 = VECTOR('',#225158,1.); +#225158 = DIRECTION('',(0.,1.,0.)); +#225159 = ORIENTED_EDGE('',*,*,#225160,.T.); +#225160 = EDGE_CURVE('',#225153,#225161,#225163,.T.); +#225161 = VERTEX_POINT('',#225162); +#225162 = CARTESIAN_POINT('',(137.948011,-59.4,1.585)); +#225163 = LINE('',#225164,#225165); +#225164 = CARTESIAN_POINT('',(139.35,-59.4,1.585)); +#225165 = VECTOR('',#225166,1.); +#225166 = DIRECTION('',(-1.,0.,0.)); +#225167 = ORIENTED_EDGE('',*,*,#225168,.T.); +#225168 = EDGE_CURVE('',#225161,#225169,#225171,.T.); +#225169 = VERTEX_POINT('',#225170); +#225170 = CARTESIAN_POINT('',(137.945433,-59.412961,1.585)); +#225171 = LINE('',#225172,#225173); +#225172 = CARTESIAN_POINT('',(137.948011,-59.4,1.585)); +#225173 = VECTOR('',#225174,1.); +#225174 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#225175 = ORIENTED_EDGE('',*,*,#225176,.T.); +#225176 = EDGE_CURVE('',#225169,#225177,#225179,.T.); +#225177 = VERTEX_POINT('',#225178); +#225178 = CARTESIAN_POINT('',(137.83,-59.39,1.585)); +#225179 = CIRCLE('',#225180,6.000007318647E-02); +#225180 = AXIS2_PLACEMENT_3D('',#225181,#225182,#225183); +#225181 = CARTESIAN_POINT('',(137.89000007318,-59.39000017668,1.585)); +#225182 = DIRECTION('',(-0.,0.,-1.)); +#225183 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#225184 = ORIENTED_EDGE('',*,*,#225185,.T.); +#225185 = EDGE_CURVE('',#225177,#225108,#225186,.T.); +#225186 = LINE('',#225187,#225188); +#225187 = CARTESIAN_POINT('',(137.83,-59.39,1.585)); +#225188 = VECTOR('',#225189,1.); +#225189 = DIRECTION('',(0.,1.,0.)); +#225190 = PLANE('',#225191); +#225191 = AXIS2_PLACEMENT_3D('',#225192,#225193,#225194); +#225192 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225193 = DIRECTION('',(0.,0.,1.)); +#225194 = DIRECTION('',(1.,0.,-0.)); +#225195 = SHELL_BASED_SURFACE_MODEL('',(#225196)); +#225196 = OPEN_SHELL('',(#225197)); +#225197 = ADVANCED_FACE('',(#225198),#225258,.T.); +#225198 = FACE_BOUND('',#225199,.F.); +#225199 = EDGE_LOOP('',(#225200,#225211,#225219,#225227,#225235,#225243, + #225252)); +#225200 = ORIENTED_EDGE('',*,*,#225201,.T.); +#225201 = EDGE_CURVE('',#225202,#225204,#225206,.T.); +#225202 = VERTEX_POINT('',#225203); +#225203 = CARTESIAN_POINT('',(143.91,-60.21,1.585)); +#225204 = VERTEX_POINT('',#225205); +#225205 = CARTESIAN_POINT('',(143.861476,-60.11471,1.585)); +#225206 = CIRCLE('',#225207,6.000027696172E-02); +#225207 = AXIS2_PLACEMENT_3D('',#225208,#225209,#225210); +#225208 = CARTESIAN_POINT('',(143.91000092846,-60.14999972304,1.585)); +#225209 = DIRECTION('',(0.,0.,-1.)); +#225210 = DIRECTION('',(-1.547440111751E-05,-0.99999999988,-0.)); +#225211 = ORIENTED_EDGE('',*,*,#225212,.T.); +#225212 = EDGE_CURVE('',#225204,#225213,#225215,.T.); +#225213 = VERTEX_POINT('',#225214); +#225214 = CARTESIAN_POINT('',(144.101476,-59.78471,1.585)); +#225215 = LINE('',#225216,#225217); +#225216 = CARTESIAN_POINT('',(143.861476,-60.11471,1.585)); +#225217 = VECTOR('',#225218,1.); +#225218 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#225219 = ORIENTED_EDGE('',*,*,#225220,.T.); +#225220 = EDGE_CURVE('',#225213,#225221,#225223,.T.); +#225221 = VERTEX_POINT('',#225222); +#225222 = CARTESIAN_POINT('',(144.140642,-59.760734,1.585)); +#225223 = LINE('',#225224,#225225); +#225224 = CARTESIAN_POINT('',(144.101476,-59.78471,1.585)); +#225225 = VECTOR('',#225226,1.); +#225226 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#225227 = ORIENTED_EDGE('',*,*,#225228,.T.); +#225228 = EDGE_CURVE('',#225221,#225229,#225231,.T.); +#225229 = VERTEX_POINT('',#225230); +#225230 = CARTESIAN_POINT('',(144.18529,-59.771476,1.585)); +#225231 = LINE('',#225232,#225233); +#225232 = CARTESIAN_POINT('',(144.140642,-59.760734,1.585)); +#225233 = VECTOR('',#225234,1.); +#225234 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#225235 = ORIENTED_EDGE('',*,*,#225236,.T.); +#225236 = EDGE_CURVE('',#225229,#225237,#225239,.T.); +#225237 = VERTEX_POINT('',#225238); +#225238 = CARTESIAN_POINT('',(144.438524,-60.11471,1.585)); +#225239 = LINE('',#225240,#225241); +#225240 = CARTESIAN_POINT('',(144.18529,-59.771476,1.585)); +#225241 = VECTOR('',#225242,1.); +#225242 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#225243 = ORIENTED_EDGE('',*,*,#225244,.T.); +#225244 = EDGE_CURVE('',#225237,#225245,#225247,.T.); +#225245 = VERTEX_POINT('',#225246); +#225246 = CARTESIAN_POINT('',(144.39,-60.21,1.585)); +#225247 = CIRCLE('',#225248,5.999941814204E-02); +#225248 = AXIS2_PLACEMENT_3D('',#225249,#225250,#225251); +#225249 = CARTESIAN_POINT('',(144.39000075805,-60.15000058186,1.585)); +#225250 = DIRECTION('',(0.,0.,-1.)); +#225251 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#225252 = ORIENTED_EDGE('',*,*,#225253,.T.); +#225253 = EDGE_CURVE('',#225245,#225202,#225254,.T.); +#225254 = LINE('',#225255,#225256); +#225255 = CARTESIAN_POINT('',(144.39,-60.21,1.585)); +#225256 = VECTOR('',#225257,1.); +#225257 = DIRECTION('',(-1.,0.,0.)); +#225258 = PLANE('',#225259); +#225259 = AXIS2_PLACEMENT_3D('',#225260,#225261,#225262); +#225260 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225261 = DIRECTION('',(0.,0.,1.)); +#225262 = DIRECTION('',(1.,0.,-0.)); +#225263 = SHELL_BASED_SURFACE_MODEL('',(#225264)); +#225264 = OPEN_SHELL('',(#225265)); +#225265 = ADVANCED_FACE('',(#225266),#225302,.T.); +#225266 = FACE_BOUND('',#225267,.F.); +#225267 = EDGE_LOOP('',(#225268,#225279,#225287,#225296)); +#225268 = ORIENTED_EDGE('',*,*,#225269,.T.); +#225269 = EDGE_CURVE('',#225270,#225272,#225274,.T.); +#225270 = VERTEX_POINT('',#225271); +#225271 = CARTESIAN_POINT('',(163.629392,-59.9056,1.585)); +#225272 = VERTEX_POINT('',#225273); +#225273 = CARTESIAN_POINT('',(163.629392,-59.7856,1.585)); +#225274 = CIRCLE('',#225275,6.000000000042E-02); +#225275 = AXIS2_PLACEMENT_3D('',#225276,#225277,#225278); +#225276 = CARTESIAN_POINT('',(163.62939177441,-59.8456,1.585)); +#225277 = DIRECTION('',(0.,0.,-1.)); +#225278 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#225279 = ORIENTED_EDGE('',*,*,#225280,.T.); +#225280 = EDGE_CURVE('',#225272,#225281,#225283,.T.); +#225281 = VERTEX_POINT('',#225282); +#225282 = CARTESIAN_POINT('',(164.103908,-59.7856,1.585)); +#225283 = LINE('',#225284,#225285); +#225284 = CARTESIAN_POINT('',(163.629392,-59.7856,1.585)); +#225285 = VECTOR('',#225286,1.); +#225286 = DIRECTION('',(1.,0.,0.)); +#225287 = ORIENTED_EDGE('',*,*,#225288,.T.); +#225288 = EDGE_CURVE('',#225281,#225289,#225291,.T.); +#225289 = VERTEX_POINT('',#225290); +#225290 = CARTESIAN_POINT('',(164.103908,-59.9056,1.585)); +#225291 = CIRCLE('',#225292,6.000000000043E-02); +#225292 = AXIS2_PLACEMENT_3D('',#225293,#225294,#225295); +#225293 = CARTESIAN_POINT('',(164.10390822558,-59.8456,1.585)); +#225294 = DIRECTION('',(0.,0.,-1.)); +#225295 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#225296 = ORIENTED_EDGE('',*,*,#225297,.T.); +#225297 = EDGE_CURVE('',#225289,#225270,#225298,.T.); +#225298 = LINE('',#225299,#225300); +#225299 = CARTESIAN_POINT('',(164.103908,-59.9056,1.585)); +#225300 = VECTOR('',#225301,1.); +#225301 = DIRECTION('',(-1.,0.,0.)); +#225302 = PLANE('',#225303); +#225303 = AXIS2_PLACEMENT_3D('',#225304,#225305,#225306); +#225304 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225305 = DIRECTION('',(0.,0.,1.)); +#225306 = DIRECTION('',(1.,0.,-0.)); +#225307 = SHELL_BASED_SURFACE_MODEL('',(#225308)); +#225308 = OPEN_SHELL('',(#225309)); +#225309 = ADVANCED_FACE('',(#225310),#225346,.T.); +#225310 = FACE_BOUND('',#225311,.F.); +#225311 = EDGE_LOOP('',(#225312,#225323,#225331,#225340)); +#225312 = ORIENTED_EDGE('',*,*,#225313,.T.); +#225313 = EDGE_CURVE('',#225314,#225316,#225318,.T.); +#225314 = VERTEX_POINT('',#225315); +#225315 = CARTESIAN_POINT('',(167.129392,-59.9056,1.585)); +#225316 = VERTEX_POINT('',#225317); +#225317 = CARTESIAN_POINT('',(167.129392,-59.7856,1.585)); +#225318 = CIRCLE('',#225319,6.000000000042E-02); +#225319 = AXIS2_PLACEMENT_3D('',#225320,#225321,#225322); +#225320 = CARTESIAN_POINT('',(167.12939177441,-59.8456,1.585)); +#225321 = DIRECTION('',(0.,0.,-1.)); +#225322 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#225323 = ORIENTED_EDGE('',*,*,#225324,.T.); +#225324 = EDGE_CURVE('',#225316,#225325,#225327,.T.); +#225325 = VERTEX_POINT('',#225326); +#225326 = CARTESIAN_POINT('',(167.603908,-59.7856,1.585)); +#225327 = LINE('',#225328,#225329); +#225328 = CARTESIAN_POINT('',(167.129392,-59.7856,1.585)); +#225329 = VECTOR('',#225330,1.); +#225330 = DIRECTION('',(1.,0.,0.)); +#225331 = ORIENTED_EDGE('',*,*,#225332,.T.); +#225332 = EDGE_CURVE('',#225325,#225333,#225335,.T.); +#225333 = VERTEX_POINT('',#225334); +#225334 = CARTESIAN_POINT('',(167.603908,-59.9056,1.585)); +#225335 = CIRCLE('',#225336,6.000000000043E-02); +#225336 = AXIS2_PLACEMENT_3D('',#225337,#225338,#225339); +#225337 = CARTESIAN_POINT('',(167.60390822558,-59.8456,1.585)); +#225338 = DIRECTION('',(0.,0.,-1.)); +#225339 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#225340 = ORIENTED_EDGE('',*,*,#225341,.T.); +#225341 = EDGE_CURVE('',#225333,#225314,#225342,.T.); +#225342 = LINE('',#225343,#225344); +#225343 = CARTESIAN_POINT('',(167.603908,-59.9056,1.585)); +#225344 = VECTOR('',#225345,1.); +#225345 = DIRECTION('',(-1.,0.,0.)); +#225346 = PLANE('',#225347); +#225347 = AXIS2_PLACEMENT_3D('',#225348,#225349,#225350); +#225348 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225349 = DIRECTION('',(0.,0.,1.)); +#225350 = DIRECTION('',(1.,0.,-0.)); +#225351 = SHELL_BASED_SURFACE_MODEL('',(#225352)); +#225352 = OPEN_SHELL('',(#225353)); +#225353 = ADVANCED_FACE('',(#225354),#225390,.T.); +#225354 = FACE_BOUND('',#225355,.F.); +#225355 = EDGE_LOOP('',(#225356,#225367,#225375,#225384)); +#225356 = ORIENTED_EDGE('',*,*,#225357,.T.); +#225357 = EDGE_CURVE('',#225358,#225360,#225362,.T.); +#225358 = VERTEX_POINT('',#225359); +#225359 = CARTESIAN_POINT('',(173.954392,-59.9056,1.585)); +#225360 = VERTEX_POINT('',#225361); +#225361 = CARTESIAN_POINT('',(173.954392,-59.7856,1.585)); +#225362 = CIRCLE('',#225363,6.000000000042E-02); +#225363 = AXIS2_PLACEMENT_3D('',#225364,#225365,#225366); +#225364 = CARTESIAN_POINT('',(173.95439177441,-59.8456,1.585)); +#225365 = DIRECTION('',(0.,0.,-1.)); +#225366 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#225367 = ORIENTED_EDGE('',*,*,#225368,.T.); +#225368 = EDGE_CURVE('',#225360,#225369,#225371,.T.); +#225369 = VERTEX_POINT('',#225370); +#225370 = CARTESIAN_POINT('',(174.428908,-59.7856,1.585)); +#225371 = LINE('',#225372,#225373); +#225372 = CARTESIAN_POINT('',(173.954392,-59.7856,1.585)); +#225373 = VECTOR('',#225374,1.); +#225374 = DIRECTION('',(1.,0.,0.)); +#225375 = ORIENTED_EDGE('',*,*,#225376,.T.); +#225376 = EDGE_CURVE('',#225369,#225377,#225379,.T.); +#225377 = VERTEX_POINT('',#225378); +#225378 = CARTESIAN_POINT('',(174.428908,-59.9056,1.585)); +#225379 = CIRCLE('',#225380,6.000000000043E-02); +#225380 = AXIS2_PLACEMENT_3D('',#225381,#225382,#225383); +#225381 = CARTESIAN_POINT('',(174.42890822558,-59.8456,1.585)); +#225382 = DIRECTION('',(0.,0.,-1.)); +#225383 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#225384 = ORIENTED_EDGE('',*,*,#225385,.T.); +#225385 = EDGE_CURVE('',#225377,#225358,#225386,.T.); +#225386 = LINE('',#225387,#225388); +#225387 = CARTESIAN_POINT('',(174.428908,-59.9056,1.585)); +#225388 = VECTOR('',#225389,1.); +#225389 = DIRECTION('',(-1.,0.,0.)); +#225390 = PLANE('',#225391); +#225391 = AXIS2_PLACEMENT_3D('',#225392,#225393,#225394); +#225392 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225393 = DIRECTION('',(0.,0.,1.)); +#225394 = DIRECTION('',(1.,0.,-0.)); +#225395 = SHELL_BASED_SURFACE_MODEL('',(#225396)); +#225396 = OPEN_SHELL('',(#225397)); +#225397 = ADVANCED_FACE('',(#225398),#225434,.T.); +#225398 = FACE_BOUND('',#225399,.F.); +#225399 = EDGE_LOOP('',(#225400,#225411,#225419,#225428)); +#225400 = ORIENTED_EDGE('',*,*,#225401,.T.); +#225401 = EDGE_CURVE('',#225402,#225404,#225406,.T.); +#225402 = VERTEX_POINT('',#225403); +#225403 = CARTESIAN_POINT('',(177.954392,-59.9056,1.585)); +#225404 = VERTEX_POINT('',#225405); +#225405 = CARTESIAN_POINT('',(177.954392,-59.7856,1.585)); +#225406 = CIRCLE('',#225407,6.000000000042E-02); +#225407 = AXIS2_PLACEMENT_3D('',#225408,#225409,#225410); +#225408 = CARTESIAN_POINT('',(177.95439177441,-59.8456,1.585)); +#225409 = DIRECTION('',(0.,0.,-1.)); +#225410 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#225411 = ORIENTED_EDGE('',*,*,#225412,.T.); +#225412 = EDGE_CURVE('',#225404,#225413,#225415,.T.); +#225413 = VERTEX_POINT('',#225414); +#225414 = CARTESIAN_POINT('',(178.428908,-59.7856,1.585)); +#225415 = LINE('',#225416,#225417); +#225416 = CARTESIAN_POINT('',(177.954392,-59.7856,1.585)); +#225417 = VECTOR('',#225418,1.); +#225418 = DIRECTION('',(1.,0.,0.)); +#225419 = ORIENTED_EDGE('',*,*,#225420,.T.); +#225420 = EDGE_CURVE('',#225413,#225421,#225423,.T.); +#225421 = VERTEX_POINT('',#225422); +#225422 = CARTESIAN_POINT('',(178.428908,-59.9056,1.585)); +#225423 = CIRCLE('',#225424,6.000000000043E-02); +#225424 = AXIS2_PLACEMENT_3D('',#225425,#225426,#225427); +#225425 = CARTESIAN_POINT('',(178.42890822558,-59.8456,1.585)); +#225426 = DIRECTION('',(0.,0.,-1.)); +#225427 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#225428 = ORIENTED_EDGE('',*,*,#225429,.T.); +#225429 = EDGE_CURVE('',#225421,#225402,#225430,.T.); +#225430 = LINE('',#225431,#225432); +#225431 = CARTESIAN_POINT('',(178.428908,-59.9056,1.585)); +#225432 = VECTOR('',#225433,1.); +#225433 = DIRECTION('',(-1.,0.,0.)); +#225434 = PLANE('',#225435); +#225435 = AXIS2_PLACEMENT_3D('',#225436,#225437,#225438); +#225436 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225437 = DIRECTION('',(0.,0.,1.)); +#225438 = DIRECTION('',(1.,0.,-0.)); +#225439 = SHELL_BASED_SURFACE_MODEL('',(#225440)); +#225440 = OPEN_SHELL('',(#225441)); +#225441 = ADVANCED_FACE('',(#225442),#225528,.T.); +#225442 = FACE_BOUND('',#225443,.F.); +#225443 = EDGE_LOOP('',(#225444,#225455,#225463,#225472,#225480,#225489, + #225497,#225505,#225513,#225522)); +#225444 = ORIENTED_EDGE('',*,*,#225445,.T.); +#225445 = EDGE_CURVE('',#225446,#225448,#225450,.T.); +#225446 = VERTEX_POINT('',#225447); +#225447 = CARTESIAN_POINT('',(144.63,-58.64,1.585)); +#225448 = VERTEX_POINT('',#225449); +#225449 = CARTESIAN_POINT('',(144.69,-58.58,1.585)); +#225450 = CIRCLE('',#225451,5.999932016262E-02); +#225451 = AXIS2_PLACEMENT_3D('',#225452,#225453,#225454); +#225452 = CARTESIAN_POINT('',(144.68999932015,-58.63999932015,1.585)); +#225453 = DIRECTION('',(0.,0.,-1.)); +#225454 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#225455 = ORIENTED_EDGE('',*,*,#225456,.T.); +#225456 = EDGE_CURVE('',#225448,#225457,#225459,.T.); +#225457 = VERTEX_POINT('',#225458); +#225458 = CARTESIAN_POINT('',(146.21,-58.58,1.585)); +#225459 = LINE('',#225460,#225461); +#225460 = CARTESIAN_POINT('',(144.69,-58.58,1.585)); +#225461 = VECTOR('',#225462,1.); +#225462 = DIRECTION('',(1.,0.,0.)); +#225463 = ORIENTED_EDGE('',*,*,#225464,.T.); +#225464 = EDGE_CURVE('',#225457,#225465,#225467,.T.); +#225465 = VERTEX_POINT('',#225466); +#225466 = CARTESIAN_POINT('',(146.27,-58.64,1.585)); +#225467 = CIRCLE('',#225468,5.999932016265E-02); +#225468 = AXIS2_PLACEMENT_3D('',#225469,#225470,#225471); +#225469 = CARTESIAN_POINT('',(146.21000067984,-58.63999932015,1.585)); +#225470 = DIRECTION('',(0.,0.,-1.)); +#225471 = DIRECTION('',(-1.133081517401E-05,0.999999999936,0.)); +#225472 = ORIENTED_EDGE('',*,*,#225473,.T.); +#225473 = EDGE_CURVE('',#225465,#225474,#225476,.T.); +#225474 = VERTEX_POINT('',#225475); +#225475 = CARTESIAN_POINT('',(146.27,-59.64,1.585)); +#225476 = LINE('',#225477,#225478); +#225477 = CARTESIAN_POINT('',(146.27,-58.64,1.585)); +#225478 = VECTOR('',#225479,1.); +#225479 = DIRECTION('',(0.,-1.,0.)); +#225480 = ORIENTED_EDGE('',*,*,#225481,.T.); +#225481 = EDGE_CURVE('',#225474,#225482,#225484,.T.); +#225482 = VERTEX_POINT('',#225483); +#225483 = CARTESIAN_POINT('',(146.15,-59.64,1.585)); +#225484 = CIRCLE('',#225485,6.000000000042E-02); +#225485 = AXIS2_PLACEMENT_3D('',#225486,#225487,#225488); +#225486 = CARTESIAN_POINT('',(146.21,-59.64000022558,1.585)); +#225487 = DIRECTION('',(0.,0.,-1.)); +#225488 = DIRECTION('',(0.999999999993,3.759793898414E-06,0.)); +#225489 = ORIENTED_EDGE('',*,*,#225490,.T.); +#225490 = EDGE_CURVE('',#225482,#225491,#225493,.T.); +#225491 = VERTEX_POINT('',#225492); +#225492 = CARTESIAN_POINT('',(146.15,-58.7,1.585)); +#225493 = LINE('',#225494,#225495); +#225494 = CARTESIAN_POINT('',(146.15,-59.64,1.585)); +#225495 = VECTOR('',#225496,1.); +#225496 = DIRECTION('',(0.,1.,0.)); +#225497 = ORIENTED_EDGE('',*,*,#225498,.T.); +#225498 = EDGE_CURVE('',#225491,#225499,#225501,.T.); +#225499 = VERTEX_POINT('',#225500); +#225500 = CARTESIAN_POINT('',(144.748011,-58.7,1.585)); +#225501 = LINE('',#225502,#225503); +#225502 = CARTESIAN_POINT('',(146.15,-58.7,1.585)); +#225503 = VECTOR('',#225504,1.); +#225504 = DIRECTION('',(-1.,0.,0.)); +#225505 = ORIENTED_EDGE('',*,*,#225506,.T.); +#225506 = EDGE_CURVE('',#225499,#225507,#225509,.T.); +#225507 = VERTEX_POINT('',#225508); +#225508 = CARTESIAN_POINT('',(144.745433,-58.712961,1.585)); +#225509 = LINE('',#225510,#225511); +#225510 = CARTESIAN_POINT('',(144.748011,-58.7,1.585)); +#225511 = VECTOR('',#225512,1.); +#225512 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#225513 = ORIENTED_EDGE('',*,*,#225514,.T.); +#225514 = EDGE_CURVE('',#225507,#225515,#225517,.T.); +#225515 = VERTEX_POINT('',#225516); +#225516 = CARTESIAN_POINT('',(144.63,-58.69,1.585)); +#225517 = CIRCLE('',#225518,6.000007318647E-02); +#225518 = AXIS2_PLACEMENT_3D('',#225519,#225520,#225521); +#225519 = CARTESIAN_POINT('',(144.69000007318,-58.69000017668,1.585)); +#225520 = DIRECTION('',(-0.,0.,-1.)); +#225521 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#225522 = ORIENTED_EDGE('',*,*,#225523,.T.); +#225523 = EDGE_CURVE('',#225515,#225446,#225524,.T.); +#225524 = LINE('',#225525,#225526); +#225525 = CARTESIAN_POINT('',(144.63,-58.69,1.585)); +#225526 = VECTOR('',#225527,1.); +#225527 = DIRECTION('',(0.,1.,0.)); +#225528 = PLANE('',#225529); +#225529 = AXIS2_PLACEMENT_3D('',#225530,#225531,#225532); +#225530 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225531 = DIRECTION('',(0.,0.,1.)); +#225532 = DIRECTION('',(1.,0.,-0.)); +#225533 = SHELL_BASED_SURFACE_MODEL('',(#225534)); +#225534 = OPEN_SHELL('',(#225535)); +#225535 = ADVANCED_FACE('',(#225536),#225622,.T.); +#225536 = FACE_BOUND('',#225537,.F.); +#225537 = EDGE_LOOP('',(#225538,#225549,#225557,#225566,#225574,#225582, + #225591,#225599,#225608,#225616)); +#225538 = ORIENTED_EDGE('',*,*,#225539,.T.); +#225539 = EDGE_CURVE('',#225540,#225542,#225544,.T.); +#225540 = VERTEX_POINT('',#225541); +#225541 = CARTESIAN_POINT('',(152.409597,-58.957856,1.585)); +#225542 = VERTEX_POINT('',#225543); +#225543 = CARTESIAN_POINT('',(152.409597,-58.827856,1.585)); +#225544 = CIRCLE('',#225545,6.500000000092E-02); +#225545 = AXIS2_PLACEMENT_3D('',#225546,#225547,#225548); +#225546 = CARTESIAN_POINT('',(152.40959734486,-58.892856,1.585)); +#225547 = DIRECTION('',(0.,0.,-1.)); +#225548 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#225549 = ORIENTED_EDGE('',*,*,#225550,.T.); +#225550 = EDGE_CURVE('',#225542,#225551,#225553,.T.); +#225551 = VERTEX_POINT('',#225552); +#225552 = CARTESIAN_POINT('',(153.309597,-58.827856,1.585)); +#225553 = LINE('',#225554,#225555); +#225554 = CARTESIAN_POINT('',(152.409597,-58.827856,1.585)); +#225555 = VECTOR('',#225556,1.); +#225556 = DIRECTION('',(1.,0.,0.)); +#225557 = ORIENTED_EDGE('',*,*,#225558,.T.); +#225558 = EDGE_CURVE('',#225551,#225559,#225561,.T.); +#225559 = VERTEX_POINT('',#225560); +#225560 = CARTESIAN_POINT('',(153.341846,-58.949292,1.585)); +#225561 = CIRCLE('',#225562,6.50002119414E-02); +#225562 = AXIS2_PLACEMENT_3D('',#225563,#225564,#225565); +#225563 = CARTESIAN_POINT('',(153.30959651351,-58.89285621194,1.585)); +#225564 = DIRECTION('',(0.,0.,-1.)); +#225565 = DIRECTION('',(7.484331678206E-06,0.999999999972,0.)); +#225566 = ORIENTED_EDGE('',*,*,#225567,.T.); +#225567 = EDGE_CURVE('',#225559,#225568,#225570,.T.); +#225568 = VERTEX_POINT('',#225569); +#225569 = CARTESIAN_POINT('',(152.654359,-59.342142,1.585)); +#225570 = LINE('',#225571,#225572); +#225571 = CARTESIAN_POINT('',(153.341846,-58.949292,1.585)); +#225572 = VECTOR('',#225573,1.); +#225573 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#225574 = ORIENTED_EDGE('',*,*,#225575,.T.); +#225575 = EDGE_CURVE('',#225568,#225576,#225578,.T.); +#225576 = VERTEX_POINT('',#225577); +#225577 = CARTESIAN_POINT('',(153.309597,-59.342142,1.585)); +#225578 = LINE('',#225579,#225580); +#225579 = CARTESIAN_POINT('',(152.654359,-59.342142,1.585)); +#225580 = VECTOR('',#225581,1.); +#225581 = DIRECTION('',(1.,0.,0.)); +#225582 = ORIENTED_EDGE('',*,*,#225583,.T.); +#225583 = EDGE_CURVE('',#225576,#225584,#225586,.T.); +#225584 = VERTEX_POINT('',#225585); +#225585 = CARTESIAN_POINT('',(153.309597,-59.472142,1.585)); +#225586 = CIRCLE('',#225587,6.500000000091E-02); +#225587 = AXIS2_PLACEMENT_3D('',#225588,#225589,#225590); +#225588 = CARTESIAN_POINT('',(153.30959665513,-59.407142,1.585)); +#225589 = DIRECTION('',(0.,0.,-1.)); +#225590 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#225591 = ORIENTED_EDGE('',*,*,#225592,.T.); +#225592 = EDGE_CURVE('',#225584,#225593,#225595,.T.); +#225593 = VERTEX_POINT('',#225594); +#225594 = CARTESIAN_POINT('',(152.409597,-59.472142,1.585)); +#225595 = LINE('',#225596,#225597); +#225596 = CARTESIAN_POINT('',(153.309597,-59.472142,1.585)); +#225597 = VECTOR('',#225598,1.); +#225598 = DIRECTION('',(-1.,0.,0.)); +#225599 = ORIENTED_EDGE('',*,*,#225600,.T.); +#225600 = EDGE_CURVE('',#225593,#225601,#225603,.T.); +#225601 = VERTEX_POINT('',#225602); +#225602 = CARTESIAN_POINT('',(152.377348,-59.350706,1.585)); +#225603 = CIRCLE('',#225604,6.500021194141E-02); +#225604 = AXIS2_PLACEMENT_3D('',#225605,#225606,#225607); +#225605 = CARTESIAN_POINT('',(152.40959748648,-59.40714178806,1.585)); +#225606 = DIRECTION('',(0.,0.,-1.)); +#225607 = DIRECTION('',(-7.484332552719E-06,-0.999999999972,-0.)); +#225608 = ORIENTED_EDGE('',*,*,#225609,.T.); +#225609 = EDGE_CURVE('',#225601,#225610,#225612,.T.); +#225610 = VERTEX_POINT('',#225611); +#225611 = CARTESIAN_POINT('',(153.064835,-58.957856,1.585)); +#225612 = LINE('',#225613,#225614); +#225613 = CARTESIAN_POINT('',(152.377348,-59.350706,1.585)); +#225614 = VECTOR('',#225615,1.); +#225615 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#225616 = ORIENTED_EDGE('',*,*,#225617,.T.); +#225617 = EDGE_CURVE('',#225610,#225540,#225618,.T.); +#225618 = LINE('',#225619,#225620); +#225619 = CARTESIAN_POINT('',(153.064835,-58.957856,1.585)); +#225620 = VECTOR('',#225621,1.); +#225621 = DIRECTION('',(-1.,0.,0.)); +#225622 = PLANE('',#225623); +#225623 = AXIS2_PLACEMENT_3D('',#225624,#225625,#225626); +#225624 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225625 = DIRECTION('',(0.,0.,1.)); +#225626 = DIRECTION('',(1.,0.,-0.)); +#225627 = SHELL_BASED_SURFACE_MODEL('',(#225628)); +#225628 = OPEN_SHELL('',(#225629)); +#225629 = ADVANCED_FACE('',(#225630),#225724,.T.); +#225630 = FACE_BOUND('',#225631,.F.); +#225631 = EDGE_LOOP('',(#225632,#225643,#225651,#225660,#225668,#225676, + #225684,#225693,#225701,#225710,#225718)); +#225632 = ORIENTED_EDGE('',*,*,#225633,.T.); +#225633 = EDGE_CURVE('',#225634,#225636,#225638,.T.); +#225634 = VERTEX_POINT('',#225635); +#225635 = CARTESIAN_POINT('',(98.915113,-58.784811,1.585)); +#225636 = VERTEX_POINT('',#225637); +#225637 = CARTESIAN_POINT('',(98.929745,-58.636252,1.585)); +#225638 = CIRCLE('',#225639,7.500006711464E-02); +#225639 = AXIS2_PLACEMENT_3D('',#225640,#225641,#225642); +#225640 = CARTESIAN_POINT('',(98.929744932885,-58.71125206711,1.585)); +#225641 = DIRECTION('',(0.,0.,-1.)); +#225642 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#225643 = ORIENTED_EDGE('',*,*,#225644,.T.); +#225644 = EDGE_CURVE('',#225636,#225645,#225647,.T.); +#225645 = VERTEX_POINT('',#225646); +#225646 = CARTESIAN_POINT('',(99.457735,-58.636663,1.585)); +#225647 = LINE('',#225648,#225649); +#225648 = CARTESIAN_POINT('',(98.929745,-58.636252,1.585)); +#225649 = VECTOR('',#225650,1.); +#225650 = DIRECTION('',(0.999999697028,-7.784235979438E-04,0.)); +#225651 = ORIENTED_EDGE('',*,*,#225652,.T.); +#225652 = EDGE_CURVE('',#225645,#225653,#225655,.T.); +#225653 = VERTEX_POINT('',#225654); +#225654 = CARTESIAN_POINT('',(99.527113,-58.725884,1.585)); +#225655 = CIRCLE('',#225656,7.459912921082E-02); +#225656 = AXIS2_PLACEMENT_3D('',#225657,#225658,#225659); +#225657 = CARTESIAN_POINT('',(99.453979858538,-58.71116755685,1.585)); +#225658 = DIRECTION('',(0.,0.,-1.)); +#225659 = DIRECTION('',(5.033760449322E-02,0.998732259204,0.)); +#225660 = ORIENTED_EDGE('',*,*,#225661,.T.); +#225661 = EDGE_CURVE('',#225653,#225662,#225664,.T.); +#225662 = VERTEX_POINT('',#225663); +#225663 = CARTESIAN_POINT('',(99.512528,-58.757589,1.585)); +#225664 = LINE('',#225665,#225666); +#225665 = CARTESIAN_POINT('',(99.527113,-58.725884,1.585)); +#225666 = VECTOR('',#225667,1.); +#225667 = DIRECTION('',(-0.417922163108,-0.908482837253,0.)); +#225668 = ORIENTED_EDGE('',*,*,#225669,.T.); +#225669 = EDGE_CURVE('',#225662,#225670,#225672,.T.); +#225670 = VERTEX_POINT('',#225671); +#225671 = CARTESIAN_POINT('',(99.084055,-59.302919,1.585)); +#225672 = LINE('',#225673,#225674); +#225673 = CARTESIAN_POINT('',(99.512528,-58.757589,1.585)); +#225674 = VECTOR('',#225675,1.); +#225675 = DIRECTION('',(-0.617821042486,-0.786318739101,0.)); +#225676 = ORIENTED_EDGE('',*,*,#225677,.T.); +#225677 = EDGE_CURVE('',#225670,#225678,#225680,.T.); +#225678 = VERTEX_POINT('',#225679); +#225679 = CARTESIAN_POINT('',(99.468186,-59.30436,1.585)); +#225680 = LINE('',#225681,#225682); +#225681 = CARTESIAN_POINT('',(99.084055,-59.302919,1.585)); +#225682 = VECTOR('',#225683,1.); +#225683 = DIRECTION('',(0.999992963857,-3.751298023116E-03,0.)); +#225684 = ORIENTED_EDGE('',*,*,#225685,.T.); +#225685 = EDGE_CURVE('',#225678,#225686,#225688,.T.); +#225686 = VERTEX_POINT('',#225687); +#225687 = CARTESIAN_POINT('',(99.453554,-59.452919,1.585)); +#225688 = CIRCLE('',#225689,7.500006711464E-02); +#225689 = AXIS2_PLACEMENT_3D('',#225690,#225691,#225692); +#225690 = CARTESIAN_POINT('',(99.453554067115,-59.37791893288,1.585)); +#225691 = DIRECTION('',(0.,0.,-1.)); +#225692 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#225693 = ORIENTED_EDGE('',*,*,#225694,.T.); +#225694 = EDGE_CURVE('',#225686,#225695,#225697,.T.); +#225695 = VERTEX_POINT('',#225696); +#225696 = CARTESIAN_POINT('',(98.915113,-59.451478,1.585)); +#225697 = LINE('',#225698,#225699); +#225698 = CARTESIAN_POINT('',(99.453554,-59.452919,1.585)); +#225699 = VECTOR('',#225700,1.); +#225700 = DIRECTION('',(-0.999996418876,2.676235352805E-03,0.)); +#225701 = ORIENTED_EDGE('',*,*,#225702,.T.); +#225702 = EDGE_CURVE('',#225695,#225703,#225705,.T.); +#225703 = VERTEX_POINT('',#225704); +#225704 = CARTESIAN_POINT('',(98.870771,-59.331582,1.585)); +#225705 = CIRCLE('',#225706,7.500055394461E-02); +#225706 = AXIS2_PLACEMENT_3D('',#225707,#225708,#225709); +#225707 = CARTESIAN_POINT('',(98.929745523454,-59.37791868822,1.585)); +#225708 = DIRECTION('',(0.,0.,-1.)); +#225709 = DIRECTION('',(-0.19509887174,-0.980783579719,-0.)); +#225710 = ORIENTED_EDGE('',*,*,#225711,.T.); +#225711 = EDGE_CURVE('',#225703,#225712,#225714,.T.); +#225712 = VERTEX_POINT('',#225713); +#225713 = CARTESIAN_POINT('',(99.299244,-58.786252,1.585)); +#225714 = LINE('',#225715,#225716); +#225715 = CARTESIAN_POINT('',(98.870771,-59.331582,1.585)); +#225716 = VECTOR('',#225717,1.); +#225717 = DIRECTION('',(0.617821042486,0.786318739101,0.)); +#225718 = ORIENTED_EDGE('',*,*,#225719,.T.); +#225719 = EDGE_CURVE('',#225712,#225634,#225720,.T.); +#225720 = LINE('',#225721,#225722); +#225721 = CARTESIAN_POINT('',(99.299244,-58.786252,1.585)); +#225722 = VECTOR('',#225723,1.); +#225723 = DIRECTION('',(-0.999992963857,3.751298023116E-03,0.)); +#225724 = PLANE('',#225725); +#225725 = AXIS2_PLACEMENT_3D('',#225726,#225727,#225728); +#225726 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225727 = DIRECTION('',(0.,0.,1.)); +#225728 = DIRECTION('',(1.,0.,-0.)); +#225729 = SHELL_BASED_SURFACE_MODEL('',(#225730)); +#225730 = OPEN_SHELL('',(#225731)); +#225731 = ADVANCED_FACE('',(#225732,#225848),#225931,.T.); +#225732 = FACE_BOUND('',#225733,.F.); +#225733 = EDGE_LOOP('',(#225734,#225745,#225753,#225761,#225769,#225777, + #225785,#225793,#225801,#225809,#225817,#225825,#225833,#225842)); +#225734 = ORIENTED_EDGE('',*,*,#225735,.T.); +#225735 = EDGE_CURVE('',#225736,#225738,#225740,.T.); +#225736 = VERTEX_POINT('',#225737); +#225737 = CARTESIAN_POINT('',(97.951424,-58.363287,1.585)); +#225738 = VERTEX_POINT('',#225739); +#225739 = CARTESIAN_POINT('',(98.024983,-58.302919,1.585)); +#225740 = CIRCLE('',#225741,7.50007493898E-02); +#225741 = AXIS2_PLACEMENT_3D('',#225742,#225743,#225744); +#225742 = CARTESIAN_POINT('',(98.02498346611,-58.37791974938,1.585)); +#225743 = DIRECTION('',(0.,0.,-1.)); +#225744 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#225745 = ORIENTED_EDGE('',*,*,#225746,.T.); +#225746 = EDGE_CURVE('',#225738,#225747,#225749,.T.); +#225747 = VERTEX_POINT('',#225748); +#225748 = CARTESIAN_POINT('',(98.270483,-58.303648,1.585)); +#225749 = LINE('',#225750,#225751); +#225750 = CARTESIAN_POINT('',(98.024983,-58.302919,1.585)); +#225751 = VECTOR('',#225752,1.); +#225752 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#225753 = ORIENTED_EDGE('',*,*,#225754,.T.); +#225754 = EDGE_CURVE('',#225747,#225755,#225757,.T.); +#225755 = VERTEX_POINT('',#225756); +#225756 = CARTESIAN_POINT('',(98.447603,-58.363178,1.585)); +#225757 = LINE('',#225758,#225759); +#225758 = CARTESIAN_POINT('',(98.270483,-58.303648,1.585)); +#225759 = VECTOR('',#225760,1.); +#225760 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#225761 = ORIENTED_EDGE('',*,*,#225762,.T.); +#225762 = EDGE_CURVE('',#225755,#225763,#225765,.T.); +#225763 = VERTEX_POINT('',#225764); +#225764 = CARTESIAN_POINT('',(98.564292,-58.48094,1.585)); +#225765 = LINE('',#225766,#225767); +#225766 = CARTESIAN_POINT('',(98.447603,-58.363178,1.585)); +#225767 = VECTOR('',#225768,1.); +#225768 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#225769 = ORIENTED_EDGE('',*,*,#225770,.T.); +#225770 = EDGE_CURVE('',#225763,#225771,#225773,.T.); +#225771 = VERTEX_POINT('',#225772); +#225772 = CARTESIAN_POINT('',(98.621553,-58.597824,1.585)); +#225773 = LINE('',#225774,#225775); +#225774 = CARTESIAN_POINT('',(98.564292,-58.48094,1.585)); +#225775 = VECTOR('',#225776,1.); +#225776 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#225777 = ORIENTED_EDGE('',*,*,#225778,.T.); +#225778 = EDGE_CURVE('',#225771,#225779,#225781,.T.); +#225779 = VERTEX_POINT('',#225780); +#225780 = CARTESIAN_POINT('',(98.671411,-58.80649,1.585)); +#225781 = LINE('',#225782,#225783); +#225782 = CARTESIAN_POINT('',(98.621553,-58.597824,1.585)); +#225783 = VECTOR('',#225784,1.); +#225784 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#225785 = ORIENTED_EDGE('',*,*,#225786,.T.); +#225786 = EDGE_CURVE('',#225779,#225787,#225789,.T.); +#225787 = VERTEX_POINT('',#225788); +#225788 = CARTESIAN_POINT('',(98.669172,-58.967537,1.585)); +#225789 = LINE('',#225790,#225791); +#225790 = CARTESIAN_POINT('',(98.671411,-58.80649,1.585)); +#225791 = VECTOR('',#225792,1.); +#225792 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#225793 = ORIENTED_EDGE('',*,*,#225794,.T.); +#225794 = EDGE_CURVE('',#225787,#225795,#225797,.T.); +#225795 = VERTEX_POINT('',#225796); +#225796 = CARTESIAN_POINT('',(98.615874,-59.173364,1.585)); +#225797 = LINE('',#225798,#225799); +#225798 = CARTESIAN_POINT('',(98.669172,-58.967537,1.585)); +#225799 = VECTOR('',#225800,1.); +#225800 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#225801 = ORIENTED_EDGE('',*,*,#225802,.T.); +#225802 = EDGE_CURVE('',#225795,#225803,#225805,.T.); +#225803 = VERTEX_POINT('',#225804); +#225804 = CARTESIAN_POINT('',(98.558924,-59.282344,1.585)); +#225805 = LINE('',#225806,#225807); +#225806 = CARTESIAN_POINT('',(98.615874,-59.173364,1.585)); +#225807 = VECTOR('',#225808,1.); +#225808 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#225809 = ORIENTED_EDGE('',*,*,#225810,.T.); +#225810 = EDGE_CURVE('',#225803,#225811,#225813,.T.); +#225811 = VERTEX_POINT('',#225812); +#225812 = CARTESIAN_POINT('',(98.443077,-59.395457,1.585)); +#225813 = LINE('',#225814,#225815); +#225814 = CARTESIAN_POINT('',(98.558924,-59.282344,1.585)); +#225815 = VECTOR('',#225816,1.); +#225816 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#225817 = ORIENTED_EDGE('',*,*,#225818,.T.); +#225818 = EDGE_CURVE('',#225811,#225819,#225821,.T.); +#225819 = VERTEX_POINT('',#225820); +#225820 = CARTESIAN_POINT('',(98.270483,-59.452189,1.585)); +#225821 = LINE('',#225822,#225823); +#225822 = CARTESIAN_POINT('',(98.443077,-59.395457,1.585)); +#225823 = VECTOR('',#225824,1.); +#225824 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#225825 = ORIENTED_EDGE('',*,*,#225826,.T.); +#225826 = EDGE_CURVE('',#225819,#225827,#225829,.T.); +#225827 = VERTEX_POINT('',#225828); +#225828 = CARTESIAN_POINT('',(98.010351,-59.451478,1.585)); +#225829 = LINE('',#225830,#225831); +#225830 = CARTESIAN_POINT('',(98.270483,-59.452189,1.585)); +#225831 = VECTOR('',#225832,1.); +#225832 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#225833 = ORIENTED_EDGE('',*,*,#225834,.T.); +#225834 = EDGE_CURVE('',#225827,#225835,#225837,.T.); +#225835 = VERTEX_POINT('',#225836); +#225836 = CARTESIAN_POINT('',(97.949983,-59.377919,1.585)); +#225837 = CIRCLE('',#225838,7.500074938989E-02); +#225838 = AXIS2_PLACEMENT_3D('',#225839,#225840,#225841); +#225839 = CARTESIAN_POINT('',(98.024983749388,-59.37791853389,1.585)); +#225840 = DIRECTION('',(0.,0.,-1.)); +#225841 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#225842 = ORIENTED_EDGE('',*,*,#225843,.T.); +#225843 = EDGE_CURVE('',#225835,#225736,#225844,.T.); +#225844 = LINE('',#225845,#225846); +#225845 = CARTESIAN_POINT('',(97.949983,-59.377919,1.585)); +#225846 = VECTOR('',#225847,1.); +#225847 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#225848 = FACE_BOUND('',#225849,.F.); +#225849 = EDGE_LOOP('',(#225850,#225860,#225868,#225876,#225884,#225892, + #225900,#225909,#225917,#225925)); +#225850 = ORIENTED_EDGE('',*,*,#225851,.T.); +#225851 = EDGE_CURVE('',#225852,#225854,#225856,.T.); +#225852 = VERTEX_POINT('',#225853); +#225853 = CARTESIAN_POINT('',(98.365421,-58.49109,1.585)); +#225854 = VERTEX_POINT('',#225855); +#225855 = CARTESIAN_POINT('',(98.250908,-58.452919,1.585)); +#225856 = LINE('',#225857,#225858); +#225857 = CARTESIAN_POINT('',(98.365421,-58.49109,1.585)); +#225858 = VECTOR('',#225859,1.); +#225859 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#225860 = ORIENTED_EDGE('',*,*,#225861,.T.); +#225861 = EDGE_CURVE('',#225854,#225862,#225864,.T.); +#225862 = VERTEX_POINT('',#225863); +#225863 = CARTESIAN_POINT('',(98.099983,-58.452919,1.585)); +#225864 = LINE('',#225865,#225866); +#225865 = CARTESIAN_POINT('',(98.250908,-58.452919,1.585)); +#225866 = VECTOR('',#225867,1.); +#225867 = DIRECTION('',(-1.,0.,0.)); +#225868 = ORIENTED_EDGE('',*,*,#225869,.T.); +#225869 = EDGE_CURVE('',#225862,#225870,#225872,.T.); +#225870 = VERTEX_POINT('',#225871); +#225871 = CARTESIAN_POINT('',(98.099983,-59.302919,1.585)); +#225872 = LINE('',#225873,#225874); +#225873 = CARTESIAN_POINT('',(98.099983,-58.452919,1.585)); +#225874 = VECTOR('',#225875,1.); +#225875 = DIRECTION('',(0.,-1.,0.)); +#225876 = ORIENTED_EDGE('',*,*,#225877,.T.); +#225877 = EDGE_CURVE('',#225870,#225878,#225880,.T.); +#225878 = VERTEX_POINT('',#225879); +#225879 = CARTESIAN_POINT('',(98.250908,-59.302919,1.585)); +#225880 = LINE('',#225881,#225882); +#225881 = CARTESIAN_POINT('',(98.099983,-59.302919,1.585)); +#225882 = VECTOR('',#225883,1.); +#225883 = DIRECTION('',(1.,0.,0.)); +#225884 = ORIENTED_EDGE('',*,*,#225885,.T.); +#225885 = EDGE_CURVE('',#225878,#225886,#225888,.T.); +#225886 = VERTEX_POINT('',#225887); +#225887 = CARTESIAN_POINT('',(98.365421,-59.264747,1.585)); +#225888 = LINE('',#225889,#225890); +#225889 = CARTESIAN_POINT('',(98.250908,-59.302919,1.585)); +#225890 = VECTOR('',#225891,1.); +#225891 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#225892 = ORIENTED_EDGE('',*,*,#225893,.T.); +#225893 = EDGE_CURVE('',#225886,#225894,#225896,.T.); +#225894 = VERTEX_POINT('',#225895); +#225895 = CARTESIAN_POINT('',(98.439533,-59.190634,1.585)); +#225896 = LINE('',#225897,#225898); +#225897 = CARTESIAN_POINT('',(98.365421,-59.264747,1.585)); +#225898 = VECTOR('',#225899,1.); +#225899 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#225900 = ORIENTED_EDGE('',*,*,#225901,.T.); +#225901 = EDGE_CURVE('',#225894,#225902,#225904,.T.); +#225902 = VERTEX_POINT('',#225903); +#225903 = CARTESIAN_POINT('',(98.521411,-58.815724,1.585)); +#225904 = CIRCLE('',#225905,0.611719141131); +#225905 = AXIS2_PLACEMENT_3D('',#225906,#225907,#225908); +#225906 = CARTESIAN_POINT('',(97.912998962242,-58.87924643649,1.585)); +#225907 = DIRECTION('',(0.,0.,1.)); +#225908 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#225909 = ORIENTED_EDGE('',*,*,#225910,.T.); +#225910 = EDGE_CURVE('',#225902,#225911,#225913,.T.); +#225911 = VERTEX_POINT('',#225912); +#225912 = CARTESIAN_POINT('',(98.478027,-58.64219,1.585)); +#225913 = LINE('',#225914,#225915); +#225914 = CARTESIAN_POINT('',(98.521411,-58.815724,1.585)); +#225915 = VECTOR('',#225916,1.); +#225916 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#225917 = ORIENTED_EDGE('',*,*,#225918,.T.); +#225918 = EDGE_CURVE('',#225911,#225919,#225921,.T.); +#225919 = VERTEX_POINT('',#225920); +#225920 = CARTESIAN_POINT('',(98.439534,-58.565203,1.585)); +#225921 = LINE('',#225922,#225923); +#225922 = CARTESIAN_POINT('',(98.478027,-58.64219,1.585)); +#225923 = VECTOR('',#225924,1.); +#225924 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#225925 = ORIENTED_EDGE('',*,*,#225926,.T.); +#225926 = EDGE_CURVE('',#225919,#225852,#225927,.T.); +#225927 = LINE('',#225928,#225929); +#225928 = CARTESIAN_POINT('',(98.439534,-58.565203,1.585)); +#225929 = VECTOR('',#225930,1.); +#225930 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#225931 = PLANE('',#225932); +#225932 = AXIS2_PLACEMENT_3D('',#225933,#225934,#225935); +#225933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225934 = DIRECTION('',(0.,0.,1.)); +#225935 = DIRECTION('',(1.,0.,-0.)); +#225936 = SHELL_BASED_SURFACE_MODEL('',(#225937)); +#225937 = OPEN_SHELL('',(#225938)); +#225938 = ADVANCED_FACE('',(#225939),#226187,.T.); +#225939 = FACE_BOUND('',#225940,.F.); +#225940 = EDGE_LOOP('',(#225941,#225951,#225959,#225967,#225975,#225984, + #225992,#226000,#226008,#226016,#226025,#226033,#226041,#226049, + #226058,#226066,#226074,#226082,#226091,#226099,#226108,#226116, + #226124,#226132,#226141,#226149,#226157,#226165,#226173,#226181)); +#225941 = ORIENTED_EDGE('',*,*,#225942,.T.); +#225942 = EDGE_CURVE('',#225943,#225945,#225947,.T.); +#225943 = VERTEX_POINT('',#225944); +#225944 = CARTESIAN_POINT('',(99.824374,-58.473492,1.585)); +#225945 = VERTEX_POINT('',#225946); +#225946 = CARTESIAN_POINT('',(99.940221,-58.360381,1.585)); +#225947 = LINE('',#225948,#225949); +#225948 = CARTESIAN_POINT('',(99.824374,-58.473492,1.585)); +#225949 = VECTOR('',#225950,1.); +#225950 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#225951 = ORIENTED_EDGE('',*,*,#225952,.T.); +#225952 = EDGE_CURVE('',#225945,#225953,#225955,.T.); +#225953 = VERTEX_POINT('',#225954); +#225954 = CARTESIAN_POINT('',(100.112814,-58.303648,1.585)); +#225955 = LINE('',#225956,#225957); +#225956 = CARTESIAN_POINT('',(99.940221,-58.360381,1.585)); +#225957 = VECTOR('',#225958,1.); +#225958 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#225959 = ORIENTED_EDGE('',*,*,#225960,.T.); +#225960 = EDGE_CURVE('',#225953,#225961,#225963,.T.); +#225961 = VERTEX_POINT('',#225962); +#225962 = CARTESIAN_POINT('',(100.27771,-58.30436,1.585)); +#225963 = LINE('',#225964,#225965); +#225964 = CARTESIAN_POINT('',(100.112814,-58.303648,1.585)); +#225965 = VECTOR('',#225966,1.); +#225966 = DIRECTION('',(0.999990678116,-4.31783283293E-03,0.)); +#225967 = ORIENTED_EDGE('',*,*,#225968,.T.); +#225968 = EDGE_CURVE('',#225961,#225969,#225971,.T.); +#225969 = VERTEX_POINT('',#225970); +#225970 = CARTESIAN_POINT('',(100.4043,-58.366288,1.585)); +#225971 = LINE('',#225972,#225973); +#225972 = CARTESIAN_POINT('',(100.27771,-58.30436,1.585)); +#225973 = VECTOR('',#225974,1.); +#225974 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#225975 = ORIENTED_EDGE('',*,*,#225976,.T.); +#225976 = EDGE_CURVE('',#225969,#225977,#225979,.T.); +#225977 = VERTEX_POINT('',#225978); +#225978 = CARTESIAN_POINT('',(100.324775,-58.49262,1.585)); +#225979 = CIRCLE('',#225980,7.500029440362E-02); +#225980 = AXIS2_PLACEMENT_3D('',#225981,#225982,#225983); +#225981 = CARTESIAN_POINT('',(100.35831605397,-58.42553764867,1.585)); +#225982 = DIRECTION('',(0.,0.,-1.)); +#225983 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#225984 = ORIENTED_EDGE('',*,*,#225985,.T.); +#225985 = EDGE_CURVE('',#225977,#225986,#225988,.T.); +#225986 = VERTEX_POINT('',#225987); +#225987 = CARTESIAN_POINT('',(100.245373,-58.452919,1.585)); +#225988 = LINE('',#225989,#225990); +#225989 = CARTESIAN_POINT('',(100.324775,-58.49262,1.585)); +#225990 = VECTOR('',#225991,1.); +#225991 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#225992 = ORIENTED_EDGE('',*,*,#225993,.T.); +#225993 = EDGE_CURVE('',#225986,#225994,#225996,.T.); +#225994 = VERTEX_POINT('',#225995); +#225995 = CARTESIAN_POINT('',(100.132391,-58.452919,1.585)); +#225996 = LINE('',#225997,#225998); +#225997 = CARTESIAN_POINT('',(100.245373,-58.452919,1.585)); +#225998 = VECTOR('',#225999,1.); +#225999 = DIRECTION('',(-1.,0.,0.)); +#226000 = ORIENTED_EDGE('',*,*,#226001,.T.); +#226001 = EDGE_CURVE('',#225994,#226002,#226004,.T.); +#226002 = VERTEX_POINT('',#226003); +#226003 = CARTESIAN_POINT('',(100.017878,-58.49109,1.585)); +#226004 = LINE('',#226005,#226006); +#226005 = CARTESIAN_POINT('',(100.132391,-58.452919,1.585)); +#226006 = VECTOR('',#226007,1.); +#226007 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#226008 = ORIENTED_EDGE('',*,*,#226009,.T.); +#226009 = EDGE_CURVE('',#226002,#226010,#226012,.T.); +#226010 = VERTEX_POINT('',#226011); +#226011 = CARTESIAN_POINT('',(99.943765,-58.565203,1.585)); +#226012 = LINE('',#226013,#226014); +#226013 = CARTESIAN_POINT('',(100.017878,-58.49109,1.585)); +#226014 = VECTOR('',#226015,1.); +#226015 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#226016 = ORIENTED_EDGE('',*,*,#226017,.T.); +#226017 = EDGE_CURVE('',#226010,#226018,#226020,.T.); +#226018 = VERTEX_POINT('',#226019); +#226019 = CARTESIAN_POINT('',(99.861888,-58.940113,1.585)); +#226020 = CIRCLE('',#226021,0.611712714363); +#226021 = AXIS2_PLACEMENT_3D('',#226022,#226023,#226024); +#226022 = CARTESIAN_POINT('',(100.47029327521,-58.8765876822,1.585)); +#226023 = DIRECTION('',(0.,0.,1.)); +#226024 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#226025 = ORIENTED_EDGE('',*,*,#226026,.T.); +#226026 = EDGE_CURVE('',#226018,#226027,#226029,.T.); +#226027 = VERTEX_POINT('',#226028); +#226028 = CARTESIAN_POINT('',(99.905271,-59.113647,1.585)); +#226029 = LINE('',#226030,#226031); +#226030 = CARTESIAN_POINT('',(99.861888,-58.940113,1.585)); +#226031 = VECTOR('',#226032,1.); +#226032 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#226033 = ORIENTED_EDGE('',*,*,#226034,.T.); +#226034 = EDGE_CURVE('',#226027,#226035,#226037,.T.); +#226035 = VERTEX_POINT('',#226036); +#226036 = CARTESIAN_POINT('',(99.943765,-59.190634,1.585)); +#226037 = LINE('',#226038,#226039); +#226038 = CARTESIAN_POINT('',(99.905271,-59.113647,1.585)); +#226039 = VECTOR('',#226040,1.); +#226040 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#226041 = ORIENTED_EDGE('',*,*,#226042,.T.); +#226042 = EDGE_CURVE('',#226035,#226043,#226045,.T.); +#226043 = VERTEX_POINT('',#226044); +#226044 = CARTESIAN_POINT('',(100.017878,-59.264748,1.585)); +#226045 = LINE('',#226046,#226047); +#226046 = CARTESIAN_POINT('',(99.943765,-59.190634,1.585)); +#226047 = VECTOR('',#226048,1.); +#226048 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#226049 = ORIENTED_EDGE('',*,*,#226050,.T.); +#226050 = EDGE_CURVE('',#226043,#226051,#226053,.T.); +#226051 = VERTEX_POINT('',#226052); +#226052 = CARTESIAN_POINT('',(100.317802,-59.264747,1.585)); +#226053 = CIRCLE('',#226054,0.299305962385); +#226054 = AXIS2_PLACEMENT_3D('',#226055,#226056,#226057); +#226055 = CARTESIAN_POINT('',(100.16783913635,-59.00571959093,1.585)); +#226056 = DIRECTION('',(0.,0.,1.)); +#226057 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#226058 = ORIENTED_EDGE('',*,*,#226059,.T.); +#226059 = EDGE_CURVE('',#226051,#226060,#226062,.T.); +#226060 = VERTEX_POINT('',#226061); +#226061 = CARTESIAN_POINT('',(100.330935,-59.251614,1.585)); +#226062 = LINE('',#226063,#226064); +#226063 = CARTESIAN_POINT('',(100.317802,-59.264747,1.585)); +#226064 = VECTOR('',#226065,1.); +#226065 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#226066 = ORIENTED_EDGE('',*,*,#226067,.T.); +#226067 = EDGE_CURVE('',#226060,#226068,#226070,.T.); +#226068 = VERTEX_POINT('',#226069); +#226069 = CARTESIAN_POINT('',(100.330935,-59.024347,1.585)); +#226070 = LINE('',#226071,#226072); +#226071 = CARTESIAN_POINT('',(100.330935,-59.251614,1.585)); +#226072 = VECTOR('',#226073,1.); +#226073 = DIRECTION('',(0.,1.,0.)); +#226074 = ORIENTED_EDGE('',*,*,#226075,.T.); +#226075 = EDGE_CURVE('',#226068,#226076,#226078,.T.); +#226076 = VERTEX_POINT('',#226077); +#226077 = CARTESIAN_POINT('',(100.200827,-59.022906,1.585)); +#226078 = LINE('',#226079,#226080); +#226079 = CARTESIAN_POINT('',(100.330935,-59.024347,1.585)); +#226080 = VECTOR('',#226081,1.); +#226081 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#226082 = ORIENTED_EDGE('',*,*,#226083,.T.); +#226083 = EDGE_CURVE('',#226076,#226084,#226086,.T.); +#226084 = VERTEX_POINT('',#226085); +#226085 = CARTESIAN_POINT('',(100.215459,-58.874347,1.585)); +#226086 = CIRCLE('',#226087,7.500006711464E-02); +#226087 = AXIS2_PLACEMENT_3D('',#226088,#226089,#226090); +#226088 = CARTESIAN_POINT('',(100.21545893288,-58.94934706711,1.585)); +#226089 = DIRECTION('',(0.,0.,-1.)); +#226090 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#226091 = ORIENTED_EDGE('',*,*,#226092,.T.); +#226092 = EDGE_CURVE('',#226084,#226093,#226095,.T.); +#226093 = VERTEX_POINT('',#226094); +#226094 = CARTESIAN_POINT('',(100.420567,-58.875788,1.585)); +#226095 = LINE('',#226096,#226097); +#226096 = CARTESIAN_POINT('',(100.215459,-58.874347,1.585)); +#226097 = VECTOR('',#226098,1.); +#226098 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#226099 = ORIENTED_EDGE('',*,*,#226100,.T.); +#226100 = EDGE_CURVE('',#226093,#226101,#226103,.T.); +#226101 = VERTEX_POINT('',#226102); +#226102 = CARTESIAN_POINT('',(100.480935,-58.949347,1.585)); +#226103 = CIRCLE('',#226104,7.500074938984E-02); +#226104 = AXIS2_PLACEMENT_3D('',#226105,#226106,#226107); +#226105 = CARTESIAN_POINT('',(100.40593425061,-58.94934746611,1.585)); +#226106 = DIRECTION('',(0.,0.,-1.)); +#226107 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#226108 = ORIENTED_EDGE('',*,*,#226109,.T.); +#226109 = EDGE_CURVE('',#226101,#226110,#226112,.T.); +#226110 = VERTEX_POINT('',#226111); +#226111 = CARTESIAN_POINT('',(100.479494,-59.297312,1.585)); +#226112 = LINE('',#226113,#226114); +#226113 = CARTESIAN_POINT('',(100.480935,-58.949347,1.585)); +#226114 = VECTOR('',#226115,1.); +#226115 = DIRECTION('',(-4.141185589904E-03,-0.999991425254,0.)); +#226116 = ORIENTED_EDGE('',*,*,#226117,.T.); +#226117 = EDGE_CURVE('',#226110,#226118,#226120,.T.); +#226118 = VERTEX_POINT('',#226119); +#226119 = CARTESIAN_POINT('',(100.458968,-59.335713,1.585)); +#226120 = LINE('',#226121,#226122); +#226121 = CARTESIAN_POINT('',(100.479494,-59.297312,1.585)); +#226122 = VECTOR('',#226123,1.); +#226123 = DIRECTION('',(-0.471400985779,-0.881918993223,0.)); +#226124 = ORIENTED_EDGE('',*,*,#226125,.T.); +#226125 = EDGE_CURVE('',#226118,#226126,#226128,.T.); +#226126 = VERTEX_POINT('',#226127); +#226127 = CARTESIAN_POINT('',(100.395458,-59.395457,1.585)); +#226128 = LINE('',#226129,#226130); +#226129 = CARTESIAN_POINT('',(100.458968,-59.335713,1.585)); +#226130 = VECTOR('',#226131,1.); +#226131 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#226132 = ORIENTED_EDGE('',*,*,#226133,.T.); +#226133 = EDGE_CURVE('',#226126,#226134,#226136,.T.); +#226134 = VERTEX_POINT('',#226135); +#226135 = CARTESIAN_POINT('',(99.935696,-59.392661,1.585)); +#226136 = CIRCLE('',#226137,0.461067828848); +#226137 = AXIS2_PLACEMENT_3D('',#226138,#226139,#226140); +#226138 = CARTESIAN_POINT('',(100.16800751268,-58.99439613352,1.585)); +#226139 = DIRECTION('',(-0.,0.,-1.)); +#226140 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#226141 = ORIENTED_EDGE('',*,*,#226142,.T.); +#226142 = EDGE_CURVE('',#226134,#226143,#226145,.T.); +#226143 = VERTEX_POINT('',#226144); +#226144 = CARTESIAN_POINT('',(99.819007,-59.274898,1.585)); +#226145 = LINE('',#226146,#226147); +#226146 = CARTESIAN_POINT('',(99.935696,-59.392661,1.585)); +#226147 = VECTOR('',#226148,1.); +#226148 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#226149 = ORIENTED_EDGE('',*,*,#226150,.T.); +#226150 = EDGE_CURVE('',#226143,#226151,#226153,.T.); +#226151 = VERTEX_POINT('',#226152); +#226152 = CARTESIAN_POINT('',(99.761746,-59.158013,1.585)); +#226153 = LINE('',#226154,#226155); +#226154 = CARTESIAN_POINT('',(99.819007,-59.274898,1.585)); +#226155 = VECTOR('',#226156,1.); +#226156 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#226157 = ORIENTED_EDGE('',*,*,#226158,.T.); +#226158 = EDGE_CURVE('',#226151,#226159,#226161,.T.); +#226159 = VERTEX_POINT('',#226160); +#226160 = CARTESIAN_POINT('',(99.711888,-58.949347,1.585)); +#226161 = LINE('',#226162,#226163); +#226162 = CARTESIAN_POINT('',(99.761746,-59.158013,1.585)); +#226163 = VECTOR('',#226164,1.); +#226164 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#226165 = ORIENTED_EDGE('',*,*,#226166,.T.); +#226166 = EDGE_CURVE('',#226159,#226167,#226169,.T.); +#226167 = VERTEX_POINT('',#226168); +#226168 = CARTESIAN_POINT('',(99.714127,-58.7883,1.585)); +#226169 = LINE('',#226170,#226171); +#226170 = CARTESIAN_POINT('',(99.711888,-58.949347,1.585)); +#226171 = VECTOR('',#226172,1.); +#226172 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#226173 = ORIENTED_EDGE('',*,*,#226174,.T.); +#226174 = EDGE_CURVE('',#226167,#226175,#226177,.T.); +#226175 = VERTEX_POINT('',#226176); +#226176 = CARTESIAN_POINT('',(99.767425,-58.582473,1.585)); +#226177 = LINE('',#226178,#226179); +#226178 = CARTESIAN_POINT('',(99.714127,-58.7883,1.585)); +#226179 = VECTOR('',#226180,1.); +#226180 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#226181 = ORIENTED_EDGE('',*,*,#226182,.T.); +#226182 = EDGE_CURVE('',#226175,#225943,#226183,.T.); +#226183 = LINE('',#226184,#226185); +#226184 = CARTESIAN_POINT('',(99.767425,-58.582473,1.585)); +#226185 = VECTOR('',#226186,1.); +#226186 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#226187 = PLANE('',#226188); +#226188 = AXIS2_PLACEMENT_3D('',#226189,#226190,#226191); +#226189 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226190 = DIRECTION('',(0.,0.,1.)); +#226191 = DIRECTION('',(1.,0.,-0.)); +#226192 = SHELL_BASED_SURFACE_MODEL('',(#226193)); +#226193 = OPEN_SHELL('',(#226194)); +#226194 = ADVANCED_FACE('',(#226195),#226397,.T.); +#226195 = FACE_BOUND('',#226196,.F.); +#226196 = EDGE_LOOP('',(#226197,#226208,#226216,#226224,#226232,#226240, + #226249,#226257,#226266,#226274,#226283,#226291,#226300,#226308, + #226317,#226325,#226334,#226342,#226350,#226358,#226367,#226375, + #226383,#226391)); +#226197 = ORIENTED_EDGE('',*,*,#226198,.T.); +#226198 = EDGE_CURVE('',#226199,#226201,#226203,.T.); +#226199 = VERTEX_POINT('',#226200); +#226200 = CARTESIAN_POINT('',(155.340369,-58.935343,1.585)); +#226201 = VERTEX_POINT('',#226202); +#226202 = CARTESIAN_POINT('',(155.559225,-58.716486,1.585)); +#226203 = CIRCLE('',#226204,0.308109459502); +#226204 = AXIS2_PLACEMENT_3D('',#226205,#226206,#226207); +#226205 = CARTESIAN_POINT('',(155.63818845359,-59.01430509279,1.585)); +#226206 = DIRECTION('',(0.,0.,-1.)); +#226207 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#226208 = ORIENTED_EDGE('',*,*,#226209,.T.); +#226209 = EDGE_CURVE('',#226201,#226210,#226212,.T.); +#226210 = VERTEX_POINT('',#226211); +#226211 = CARTESIAN_POINT('',(155.791361,-58.714206,1.585)); +#226212 = LINE('',#226213,#226214); +#226213 = CARTESIAN_POINT('',(155.559225,-58.716486,1.585)); +#226214 = VECTOR('',#226215,1.); +#226215 = DIRECTION('',(0.999951769331,9.821354869909E-03,0.)); +#226216 = ORIENTED_EDGE('',*,*,#226217,.T.); +#226217 = EDGE_CURVE('',#226210,#226218,#226220,.T.); +#226218 = VERTEX_POINT('',#226219); +#226219 = CARTESIAN_POINT('',(155.817237,-58.720433,1.585)); +#226220 = LINE('',#226221,#226222); +#226221 = CARTESIAN_POINT('',(155.791361,-58.714206,1.585)); +#226222 = VECTOR('',#226223,1.); +#226223 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#226224 = ORIENTED_EDGE('',*,*,#226225,.T.); +#226225 = EDGE_CURVE('',#226218,#226226,#226228,.T.); +#226226 = VERTEX_POINT('',#226227); +#226227 = CARTESIAN_POINT('',(155.919844,-58.775466,1.585)); +#226228 = LINE('',#226229,#226230); +#226229 = CARTESIAN_POINT('',(155.817237,-58.720433,1.585)); +#226230 = VECTOR('',#226231,1.); +#226231 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#226232 = ORIENTED_EDGE('',*,*,#226233,.T.); +#226233 = EDGE_CURVE('',#226226,#226234,#226236,.T.); +#226234 = VERTEX_POINT('',#226235); +#226235 = CARTESIAN_POINT('',(155.974878,-58.835217,1.585)); +#226236 = LINE('',#226237,#226238); +#226237 = CARTESIAN_POINT('',(155.919844,-58.775466,1.585)); +#226238 = VECTOR('',#226239,1.); +#226239 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#226240 = ORIENTED_EDGE('',*,*,#226241,.T.); +#226241 = EDGE_CURVE('',#226234,#226242,#226244,.T.); +#226242 = VERTEX_POINT('',#226243); +#226243 = CARTESIAN_POINT('',(155.968491,-59.287297,1.585)); +#226244 = CIRCLE('',#226245,0.407997408492); +#226245 = AXIS2_PLACEMENT_3D('',#226246,#226247,#226248); +#226246 = CARTESIAN_POINT('',(155.6320750414,-59.05645898723,1.585)); +#226247 = DIRECTION('',(0.,0.,-1.)); +#226248 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#226249 = ORIENTED_EDGE('',*,*,#226250,.T.); +#226250 = EDGE_CURVE('',#226242,#226251,#226253,.T.); +#226251 = VERTEX_POINT('',#226252); +#226252 = CARTESIAN_POINT('',(155.919843,-59.338819,1.585)); +#226253 = LINE('',#226254,#226255); +#226254 = CARTESIAN_POINT('',(155.968491,-59.287297,1.585)); +#226255 = VECTOR('',#226256,1.); +#226256 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#226257 = ORIENTED_EDGE('',*,*,#226258,.T.); +#226258 = EDGE_CURVE('',#226251,#226259,#226261,.T.); +#226259 = VERTEX_POINT('',#226260); +#226260 = CARTESIAN_POINT('',(155.827921,-59.246895,1.585)); +#226261 = CIRCLE('',#226262,6.499937665135E-02); +#226262 = AXIS2_PLACEMENT_3D('',#226263,#226264,#226265); +#226263 = CARTESIAN_POINT('',(155.87388218097,-59.29285681902,1.585)); +#226264 = DIRECTION('',(-0.,0.,-1.)); +#226265 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#226266 = ORIENTED_EDGE('',*,*,#226267,.T.); +#226267 = EDGE_CURVE('',#226259,#226268,#226270,.T.); +#226268 = VERTEX_POINT('',#226269); +#226269 = CARTESIAN_POINT('',(155.863319,-59.211497,1.585)); +#226270 = LINE('',#226271,#226272); +#226271 = CARTESIAN_POINT('',(155.827921,-59.246895,1.585)); +#226272 = VECTOR('',#226273,1.); +#226273 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#226274 = ORIENTED_EDGE('',*,*,#226275,.T.); +#226275 = EDGE_CURVE('',#226268,#226276,#226278,.T.); +#226276 = VERTEX_POINT('',#226277); +#226277 = CARTESIAN_POINT('',(155.863319,-58.902789,1.585)); +#226278 = CIRCLE('',#226279,0.277419178293); +#226279 = AXIS2_PLACEMENT_3D('',#226280,#226281,#226282); +#226280 = CARTESIAN_POINT('',(155.632806,-59.057143,1.585)); +#226281 = DIRECTION('',(0.,-0.,1.)); +#226282 = DIRECTION('',(0.830919482272,-0.556392679661,-0.)); +#226283 = ORIENTED_EDGE('',*,*,#226284,.T.); +#226284 = EDGE_CURVE('',#226276,#226285,#226287,.T.); +#226285 = VERTEX_POINT('',#226286); +#226286 = CARTESIAN_POINT('',(155.835379,-58.874849,1.585)); +#226287 = LINE('',#226288,#226289); +#226288 = CARTESIAN_POINT('',(155.863319,-58.902789,1.585)); +#226289 = VECTOR('',#226290,1.); +#226290 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#226291 = ORIENTED_EDGE('',*,*,#226292,.T.); +#226292 = EDGE_CURVE('',#226285,#226293,#226295,.T.); +#226293 = VERTEX_POINT('',#226294); +#226294 = CARTESIAN_POINT('',(155.526671,-58.874849,1.585)); +#226295 = CIRCLE('',#226296,0.277419178293); +#226296 = AXIS2_PLACEMENT_3D('',#226297,#226298,#226299); +#226297 = CARTESIAN_POINT('',(155.681025,-59.105362,1.585)); +#226298 = DIRECTION('',(0.,0.,1.)); +#226299 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#226300 = ORIENTED_EDGE('',*,*,#226301,.T.); +#226301 = EDGE_CURVE('',#226293,#226302,#226304,.T.); +#226302 = VERTEX_POINT('',#226303); +#226303 = CARTESIAN_POINT('',(155.498733,-58.902787,1.585)); +#226304 = LINE('',#226305,#226306); +#226305 = CARTESIAN_POINT('',(155.526671,-58.874849,1.585)); +#226306 = VECTOR('',#226307,1.); +#226307 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#226308 = ORIENTED_EDGE('',*,*,#226309,.T.); +#226309 = EDGE_CURVE('',#226302,#226310,#226312,.T.); +#226310 = VERTEX_POINT('',#226311); +#226311 = CARTESIAN_POINT('',(155.498732,-59.211497,1.585)); +#226312 = CIRCLE('',#226313,0.277420975587); +#226313 = AXIS2_PLACEMENT_3D('',#226314,#226315,#226316); +#226314 = CARTESIAN_POINT('',(155.7292469934,-59.0571427467,1.585)); +#226315 = DIRECTION('',(0.,0.,1.)); +#226316 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#226317 = ORIENTED_EDGE('',*,*,#226318,.T.); +#226318 = EDGE_CURVE('',#226310,#226319,#226321,.T.); +#226319 = VERTEX_POINT('',#226320); +#226320 = CARTESIAN_POINT('',(155.53413,-59.246895,1.585)); +#226321 = LINE('',#226322,#226323); +#226322 = CARTESIAN_POINT('',(155.498732,-59.211497,1.585)); +#226323 = VECTOR('',#226324,1.); +#226324 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#226325 = ORIENTED_EDGE('',*,*,#226326,.T.); +#226326 = EDGE_CURVE('',#226319,#226327,#226329,.T.); +#226327 = VERTEX_POINT('',#226328); +#226328 = CARTESIAN_POINT('',(155.481701,-59.357534,1.585)); +#226329 = CIRCLE('',#226330,6.499980032117E-02); +#226330 = AXIS2_PLACEMENT_3D('',#226331,#226332,#226333); +#226331 = CARTESIAN_POINT('',(155.48816812219,-59.29285672136,1.585)); +#226332 = DIRECTION('',(0.,0.,-1.)); +#226333 = DIRECTION('',(0.707107984622,0.707105577749,0.)); +#226334 = ORIENTED_EDGE('',*,*,#226335,.T.); +#226335 = EDGE_CURVE('',#226327,#226336,#226338,.T.); +#226336 = VERTEX_POINT('',#226337); +#226337 = CARTESIAN_POINT('',(155.034723,-59.310052,1.585)); +#226338 = LINE('',#226339,#226340); +#226339 = CARTESIAN_POINT('',(155.481701,-59.357534,1.585)); +#226340 = VECTOR('',#226341,1.); +#226341 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#226342 = ORIENTED_EDGE('',*,*,#226343,.T.); +#226343 = EDGE_CURVE('',#226336,#226344,#226346,.T.); +#226344 = VERTEX_POINT('',#226345); +#226345 = CARTESIAN_POINT('',(154.997368,-59.268775,1.585)); +#226346 = LINE('',#226347,#226348); +#226347 = CARTESIAN_POINT('',(155.034723,-59.310052,1.585)); +#226348 = VECTOR('',#226349,1.); +#226349 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#226350 = ORIENTED_EDGE('',*,*,#226351,.T.); +#226351 = EDGE_CURVE('',#226344,#226352,#226354,.T.); +#226352 = VERTEX_POINT('',#226353); +#226353 = CARTESIAN_POINT('',(154.994597,-58.821428,1.585)); +#226354 = LINE('',#226355,#226356); +#226355 = CARTESIAN_POINT('',(154.997368,-59.268775,1.585)); +#226356 = VECTOR('',#226357,1.); +#226357 = DIRECTION('',(-6.194177765462E-03,0.999980815897,0.)); +#226358 = ORIENTED_EDGE('',*,*,#226359,.T.); +#226359 = EDGE_CURVE('',#226352,#226360,#226362,.T.); +#226360 = VERTEX_POINT('',#226361); +#226361 = CARTESIAN_POINT('',(155.124597,-58.821428,1.585)); +#226362 = CIRCLE('',#226363,6.500000000091E-02); +#226363 = AXIS2_PLACEMENT_3D('',#226364,#226365,#226366); +#226364 = CARTESIAN_POINT('',(155.059597,-58.82142834486,1.585)); +#226365 = DIRECTION('',(0.,0.,-1.)); +#226366 = DIRECTION('',(-0.999999999986,5.305658244297E-06,0.)); +#226367 = ORIENTED_EDGE('',*,*,#226368,.T.); +#226368 = EDGE_CURVE('',#226360,#226369,#226371,.T.); +#226369 = VERTEX_POINT('',#226370); +#226370 = CARTESIAN_POINT('',(155.124597,-59.191176,1.585)); +#226371 = LINE('',#226372,#226373); +#226372 = CARTESIAN_POINT('',(155.124597,-58.821428,1.585)); +#226373 = VECTOR('',#226374,1.); +#226374 = DIRECTION('',(0.,-1.,0.)); +#226375 = ORIENTED_EDGE('',*,*,#226376,.T.); +#226376 = EDGE_CURVE('',#226369,#226377,#226379,.T.); +#226377 = VERTEX_POINT('',#226378); +#226378 = CARTESIAN_POINT('',(155.354733,-59.214189,1.585)); +#226379 = LINE('',#226380,#226381); +#226380 = CARTESIAN_POINT('',(155.124597,-59.191176,1.585)); +#226381 = VECTOR('',#226382,1.); +#226382 = DIRECTION('',(0.99503744706,-9.950115049007E-02,0.)); +#226383 = ORIENTED_EDGE('',*,*,#226384,.T.); +#226384 = EDGE_CURVE('',#226377,#226385,#226387,.T.); +#226385 = VERTEX_POINT('',#226386); +#226386 = CARTESIAN_POINT('',(155.337618,-59.168894,1.585)); +#226387 = LINE('',#226388,#226389); +#226388 = CARTESIAN_POINT('',(155.354733,-59.214189,1.585)); +#226389 = VECTOR('',#226390,1.); +#226390 = DIRECTION('',(-0.353464827548,0.935447815587,0.)); +#226391 = ORIENTED_EDGE('',*,*,#226392,.T.); +#226392 = EDGE_CURVE('',#226385,#226199,#226393,.T.); +#226393 = LINE('',#226394,#226395); +#226394 = CARTESIAN_POINT('',(155.337618,-59.168894,1.585)); +#226395 = VECTOR('',#226396,1.); +#226396 = DIRECTION('',(1.177819480953E-02,0.999930634658,0.)); +#226397 = PLANE('',#226398); +#226398 = AXIS2_PLACEMENT_3D('',#226399,#226400,#226401); +#226399 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226400 = DIRECTION('',(0.,0.,1.)); +#226401 = DIRECTION('',(1.,0.,-0.)); +#226402 = SHELL_BASED_SURFACE_MODEL('',(#226403)); +#226403 = OPEN_SHELL('',(#226404)); +#226404 = ADVANCED_FACE('',(#226405),#226539,.T.); +#226405 = FACE_BOUND('',#226406,.F.); +#226406 = EDGE_LOOP('',(#226407,#226417,#226425,#226434,#226442,#226450, + #226459,#226467,#226476,#226484,#226492,#226500,#226508,#226517, + #226525,#226533)); +#226407 = ORIENTED_EDGE('',*,*,#226408,.T.); +#226408 = EDGE_CURVE('',#226409,#226411,#226413,.T.); +#226409 = VERTEX_POINT('',#226410); +#226410 = CARTESIAN_POINT('',(91.162371,-58.224941,1.585)); +#226411 = VERTEX_POINT('',#226412); +#226412 = CARTESIAN_POINT('',(91.200827,-58.20436,1.585)); +#226413 = LINE('',#226414,#226415); +#226414 = CARTESIAN_POINT('',(91.162371,-58.224941,1.585)); +#226415 = VECTOR('',#226416,1.); +#226416 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#226417 = ORIENTED_EDGE('',*,*,#226418,.T.); +#226418 = EDGE_CURVE('',#226411,#226419,#226421,.T.); +#226419 = VERTEX_POINT('',#226420); +#226420 = CARTESIAN_POINT('',(91.222664,-58.20436,1.585)); +#226421 = LINE('',#226422,#226423); +#226422 = CARTESIAN_POINT('',(91.200827,-58.20436,1.585)); +#226423 = VECTOR('',#226424,1.); +#226424 = DIRECTION('',(1.,0.,0.)); +#226425 = ORIENTED_EDGE('',*,*,#226426,.T.); +#226426 = EDGE_CURVE('',#226419,#226427,#226429,.T.); +#226427 = VERTEX_POINT('',#226428); +#226428 = CARTESIAN_POINT('',(91.290459,-58.277919,1.585)); +#226429 = CIRCLE('',#226430,7.216898094228E-02); +#226430 = AXIS2_PLACEMENT_3D('',#226431,#226432,#226433); +#226431 = CARTESIAN_POINT('',(91.218306063893,-58.27639728342,1.585)); +#226432 = DIRECTION('',(0.,0.,-1.)); +#226433 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#226434 = ORIENTED_EDGE('',*,*,#226435,.T.); +#226435 = EDGE_CURVE('',#226427,#226436,#226438,.T.); +#226436 = VERTEX_POINT('',#226437); +#226437 = CARTESIAN_POINT('',(91.290459,-59.202919,1.585)); +#226438 = LINE('',#226439,#226440); +#226439 = CARTESIAN_POINT('',(91.290459,-58.277919,1.585)); +#226440 = VECTOR('',#226441,1.); +#226441 = DIRECTION('',(0.,-1.,0.)); +#226442 = ORIENTED_EDGE('',*,*,#226443,.T.); +#226443 = EDGE_CURVE('',#226436,#226444,#226446,.T.); +#226444 = VERTEX_POINT('',#226445); +#226445 = CARTESIAN_POINT('',(91.515805,-59.20436,1.585)); +#226446 = LINE('',#226447,#226448); +#226447 = CARTESIAN_POINT('',(91.290459,-59.202919,1.585)); +#226448 = VECTOR('',#226449,1.); +#226449 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#226450 = ORIENTED_EDGE('',*,*,#226451,.T.); +#226451 = EDGE_CURVE('',#226444,#226452,#226454,.T.); +#226452 = VERTEX_POINT('',#226453); +#226453 = CARTESIAN_POINT('',(91.501173,-59.352919,1.585)); +#226454 = CIRCLE('',#226455,7.500006711464E-02); +#226455 = AXIS2_PLACEMENT_3D('',#226456,#226457,#226458); +#226456 = CARTESIAN_POINT('',(91.501173067115,-59.27791893288,1.585)); +#226457 = DIRECTION('',(0.,0.,-1.)); +#226458 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#226459 = ORIENTED_EDGE('',*,*,#226460,.T.); +#226460 = EDGE_CURVE('',#226452,#226461,#226463,.T.); +#226461 = VERTEX_POINT('',#226462); +#226462 = CARTESIAN_POINT('',(90.915113,-59.351478,1.585)); +#226463 = LINE('',#226464,#226465); +#226464 = CARTESIAN_POINT('',(91.501173,-59.352919,1.585)); +#226465 = VECTOR('',#226466,1.); +#226466 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#226467 = ORIENTED_EDGE('',*,*,#226468,.T.); +#226468 = EDGE_CURVE('',#226461,#226469,#226471,.T.); +#226469 = VERTEX_POINT('',#226470); +#226470 = CARTESIAN_POINT('',(90.929745,-59.202919,1.585)); +#226471 = CIRCLE('',#226472,7.500006711464E-02); +#226472 = AXIS2_PLACEMENT_3D('',#226473,#226474,#226475); +#226473 = CARTESIAN_POINT('',(90.929744932885,-59.27791906711,1.585)); +#226474 = DIRECTION('',(0.,0.,-1.)); +#226475 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#226476 = ORIENTED_EDGE('',*,*,#226477,.T.); +#226477 = EDGE_CURVE('',#226469,#226478,#226480,.T.); +#226478 = VERTEX_POINT('',#226479); +#226479 = CARTESIAN_POINT('',(91.140459,-59.202919,1.585)); +#226480 = LINE('',#226481,#226482); +#226481 = CARTESIAN_POINT('',(90.929745,-59.202919,1.585)); +#226482 = VECTOR('',#226483,1.); +#226483 = DIRECTION('',(1.,0.,0.)); +#226484 = ORIENTED_EDGE('',*,*,#226485,.T.); +#226485 = EDGE_CURVE('',#226478,#226486,#226488,.T.); +#226486 = VERTEX_POINT('',#226487); +#226487 = CARTESIAN_POINT('',(91.140459,-58.506604,1.585)); +#226488 = LINE('',#226489,#226490); +#226489 = CARTESIAN_POINT('',(91.140459,-59.202919,1.585)); +#226490 = VECTOR('',#226491,1.); +#226491 = DIRECTION('',(0.,1.,0.)); +#226492 = ORIENTED_EDGE('',*,*,#226493,.T.); +#226493 = EDGE_CURVE('',#226486,#226494,#226496,.T.); +#226494 = VERTEX_POINT('',#226495); +#226495 = CARTESIAN_POINT('',(91.064823,-58.579131,1.585)); +#226496 = LINE('',#226497,#226498); +#226497 = CARTESIAN_POINT('',(91.140459,-58.506604,1.585)); +#226498 = VECTOR('',#226499,1.); +#226499 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#226500 = ORIENTED_EDGE('',*,*,#226501,.T.); +#226501 = EDGE_CURVE('',#226494,#226502,#226504,.T.); +#226502 = VERTEX_POINT('',#226503); +#226503 = CARTESIAN_POINT('',(90.949554,-58.63597,1.585)); +#226504 = LINE('',#226505,#226506); +#226505 = CARTESIAN_POINT('',(91.064823,-58.579131,1.585)); +#226506 = VECTOR('',#226507,1.); +#226507 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#226508 = ORIENTED_EDGE('',*,*,#226509,.T.); +#226509 = EDGE_CURVE('',#226502,#226510,#226512,.T.); +#226510 = VERTEX_POINT('',#226511); +#226511 = CARTESIAN_POINT('',(90.896204,-58.496551,1.585)); +#226512 = CIRCLE('',#226513,7.500005272362E-02); +#226513 = AXIS2_PLACEMENT_3D('',#226514,#226515,#226516); +#226514 = CARTESIAN_POINT('',(90.92974455676,-58.56363332972,1.585)); +#226515 = DIRECTION('',(0.,0.,-1.)); +#226516 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#226517 = ORIENTED_EDGE('',*,*,#226518,.T.); +#226518 = EDGE_CURVE('',#226510,#226519,#226521,.T.); +#226519 = VERTEX_POINT('',#226520); +#226520 = CARTESIAN_POINT('',(90.980556,-58.454375,1.585)); +#226521 = LINE('',#226522,#226523); +#226522 = CARTESIAN_POINT('',(90.896204,-58.496551,1.585)); +#226523 = VECTOR('',#226524,1.); +#226524 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#226525 = ORIENTED_EDGE('',*,*,#226526,.T.); +#226526 = EDGE_CURVE('',#226519,#226527,#226529,.T.); +#226527 = VERTEX_POINT('',#226528); +#226528 = CARTESIAN_POINT('',(91.061935,-58.372996,1.585)); +#226529 = LINE('',#226530,#226531); +#226530 = CARTESIAN_POINT('',(90.980556,-58.454375,1.585)); +#226531 = VECTOR('',#226532,1.); +#226532 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#226533 = ORIENTED_EDGE('',*,*,#226534,.T.); +#226534 = EDGE_CURVE('',#226527,#226409,#226535,.T.); +#226535 = LINE('',#226536,#226537); +#226536 = CARTESIAN_POINT('',(91.061935,-58.372996,1.585)); +#226537 = VECTOR('',#226538,1.); +#226538 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#226539 = PLANE('',#226540); +#226540 = AXIS2_PLACEMENT_3D('',#226541,#226542,#226543); +#226541 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226542 = DIRECTION('',(0.,0.,1.)); +#226543 = DIRECTION('',(1.,0.,-0.)); +#226544 = SHELL_BASED_SURFACE_MODEL('',(#226545)); +#226545 = OPEN_SHELL('',(#226546)); +#226546 = ADVANCED_FACE('',(#226547,#226663),#226746,.T.); +#226547 = FACE_BOUND('',#226548,.F.); +#226548 = EDGE_LOOP('',(#226549,#226560,#226568,#226576,#226584,#226592, + #226600,#226608,#226616,#226624,#226632,#226640,#226648,#226657)); +#226549 = ORIENTED_EDGE('',*,*,#226550,.T.); +#226550 = EDGE_CURVE('',#226551,#226553,#226555,.T.); +#226551 = VERTEX_POINT('',#226552); +#226552 = CARTESIAN_POINT('',(89.903805,-58.263287,1.585)); +#226553 = VERTEX_POINT('',#226554); +#226554 = CARTESIAN_POINT('',(89.977364,-58.202919,1.585)); +#226555 = CIRCLE('',#226556,7.500074938982E-02); +#226556 = AXIS2_PLACEMENT_3D('',#226557,#226558,#226559); +#226557 = CARTESIAN_POINT('',(89.97736446611,-58.27791974938,1.585)); +#226558 = DIRECTION('',(0.,0.,-1.)); +#226559 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#226560 = ORIENTED_EDGE('',*,*,#226561,.T.); +#226561 = EDGE_CURVE('',#226553,#226562,#226564,.T.); +#226562 = VERTEX_POINT('',#226563); +#226563 = CARTESIAN_POINT('',(90.222864,-58.203648,1.585)); +#226564 = LINE('',#226565,#226566); +#226565 = CARTESIAN_POINT('',(89.977364,-58.202919,1.585)); +#226566 = VECTOR('',#226567,1.); +#226567 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#226568 = ORIENTED_EDGE('',*,*,#226569,.T.); +#226569 = EDGE_CURVE('',#226562,#226570,#226572,.T.); +#226570 = VERTEX_POINT('',#226571); +#226571 = CARTESIAN_POINT('',(90.399984,-58.263178,1.585)); +#226572 = LINE('',#226573,#226574); +#226573 = CARTESIAN_POINT('',(90.222864,-58.203648,1.585)); +#226574 = VECTOR('',#226575,1.); +#226575 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#226576 = ORIENTED_EDGE('',*,*,#226577,.T.); +#226577 = EDGE_CURVE('',#226570,#226578,#226580,.T.); +#226578 = VERTEX_POINT('',#226579); +#226579 = CARTESIAN_POINT('',(90.516673,-58.38094,1.585)); +#226580 = LINE('',#226581,#226582); +#226581 = CARTESIAN_POINT('',(90.399984,-58.263178,1.585)); +#226582 = VECTOR('',#226583,1.); +#226583 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#226584 = ORIENTED_EDGE('',*,*,#226585,.T.); +#226585 = EDGE_CURVE('',#226578,#226586,#226588,.T.); +#226586 = VERTEX_POINT('',#226587); +#226587 = CARTESIAN_POINT('',(90.573934,-58.497824,1.585)); +#226588 = LINE('',#226589,#226590); +#226589 = CARTESIAN_POINT('',(90.516673,-58.38094,1.585)); +#226590 = VECTOR('',#226591,1.); +#226591 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#226592 = ORIENTED_EDGE('',*,*,#226593,.T.); +#226593 = EDGE_CURVE('',#226586,#226594,#226596,.T.); +#226594 = VERTEX_POINT('',#226595); +#226595 = CARTESIAN_POINT('',(90.623792,-58.70649,1.585)); +#226596 = LINE('',#226597,#226598); +#226597 = CARTESIAN_POINT('',(90.573934,-58.497824,1.585)); +#226598 = VECTOR('',#226599,1.); +#226599 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#226600 = ORIENTED_EDGE('',*,*,#226601,.T.); +#226601 = EDGE_CURVE('',#226594,#226602,#226604,.T.); +#226602 = VERTEX_POINT('',#226603); +#226603 = CARTESIAN_POINT('',(90.621553,-58.867537,1.585)); +#226604 = LINE('',#226605,#226606); +#226605 = CARTESIAN_POINT('',(90.623792,-58.70649,1.585)); +#226606 = VECTOR('',#226607,1.); +#226607 = DIRECTION('',(-1.390143030559E-02,-0.999903370449,0.)); +#226608 = ORIENTED_EDGE('',*,*,#226609,.T.); +#226609 = EDGE_CURVE('',#226602,#226610,#226612,.T.); +#226610 = VERTEX_POINT('',#226611); +#226611 = CARTESIAN_POINT('',(90.568255,-59.073364,1.585)); +#226612 = LINE('',#226613,#226614); +#226613 = CARTESIAN_POINT('',(90.621553,-58.867537,1.585)); +#226614 = VECTOR('',#226615,1.); +#226615 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#226616 = ORIENTED_EDGE('',*,*,#226617,.T.); +#226617 = EDGE_CURVE('',#226610,#226618,#226620,.T.); +#226618 = VERTEX_POINT('',#226619); +#226619 = CARTESIAN_POINT('',(90.511305,-59.182344,1.585)); +#226620 = LINE('',#226621,#226622); +#226621 = CARTESIAN_POINT('',(90.568255,-59.073364,1.585)); +#226622 = VECTOR('',#226623,1.); +#226623 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#226624 = ORIENTED_EDGE('',*,*,#226625,.T.); +#226625 = EDGE_CURVE('',#226618,#226626,#226628,.T.); +#226626 = VERTEX_POINT('',#226627); +#226627 = CARTESIAN_POINT('',(90.395458,-59.295457,1.585)); +#226628 = LINE('',#226629,#226630); +#226629 = CARTESIAN_POINT('',(90.511305,-59.182344,1.585)); +#226630 = VECTOR('',#226631,1.); +#226631 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#226632 = ORIENTED_EDGE('',*,*,#226633,.T.); +#226633 = EDGE_CURVE('',#226626,#226634,#226636,.T.); +#226634 = VERTEX_POINT('',#226635); +#226635 = CARTESIAN_POINT('',(90.222864,-59.352189,1.585)); +#226636 = LINE('',#226637,#226638); +#226637 = CARTESIAN_POINT('',(90.395458,-59.295457,1.585)); +#226638 = VECTOR('',#226639,1.); +#226639 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#226640 = ORIENTED_EDGE('',*,*,#226641,.T.); +#226641 = EDGE_CURVE('',#226634,#226642,#226644,.T.); +#226642 = VERTEX_POINT('',#226643); +#226643 = CARTESIAN_POINT('',(89.962732,-59.351478,1.585)); +#226644 = LINE('',#226645,#226646); +#226645 = CARTESIAN_POINT('',(90.222864,-59.352189,1.585)); +#226646 = VECTOR('',#226647,1.); +#226647 = DIRECTION('',(-0.999996264754,2.733217536645E-03,0.)); +#226648 = ORIENTED_EDGE('',*,*,#226649,.T.); +#226649 = EDGE_CURVE('',#226642,#226650,#226652,.T.); +#226650 = VERTEX_POINT('',#226651); +#226651 = CARTESIAN_POINT('',(89.902364,-59.277919,1.585)); +#226652 = CIRCLE('',#226653,7.500074938982E-02); +#226653 = AXIS2_PLACEMENT_3D('',#226654,#226655,#226656); +#226654 = CARTESIAN_POINT('',(89.977364749388,-59.27791853389,1.585)); +#226655 = DIRECTION('',(0.,0.,-1.)); +#226656 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#226657 = ORIENTED_EDGE('',*,*,#226658,.T.); +#226658 = EDGE_CURVE('',#226650,#226551,#226659,.T.); +#226659 = LINE('',#226660,#226661); +#226660 = CARTESIAN_POINT('',(89.902364,-59.277919,1.585)); +#226661 = VECTOR('',#226662,1.); +#226662 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#226663 = FACE_BOUND('',#226664,.F.); +#226664 = EDGE_LOOP('',(#226665,#226675,#226683,#226691,#226699,#226707, + #226715,#226724,#226732,#226740)); +#226665 = ORIENTED_EDGE('',*,*,#226666,.T.); +#226666 = EDGE_CURVE('',#226667,#226669,#226671,.T.); +#226667 = VERTEX_POINT('',#226668); +#226668 = CARTESIAN_POINT('',(90.317802,-58.39109,1.585)); +#226669 = VERTEX_POINT('',#226670); +#226670 = CARTESIAN_POINT('',(90.203289,-58.352919,1.585)); +#226671 = LINE('',#226672,#226673); +#226672 = CARTESIAN_POINT('',(90.317802,-58.39109,1.585)); +#226673 = VECTOR('',#226674,1.); +#226674 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#226675 = ORIENTED_EDGE('',*,*,#226676,.T.); +#226676 = EDGE_CURVE('',#226669,#226677,#226679,.T.); +#226677 = VERTEX_POINT('',#226678); +#226678 = CARTESIAN_POINT('',(90.052364,-58.352919,1.585)); +#226679 = LINE('',#226680,#226681); +#226680 = CARTESIAN_POINT('',(90.203289,-58.352919,1.585)); +#226681 = VECTOR('',#226682,1.); +#226682 = DIRECTION('',(-1.,0.,0.)); +#226683 = ORIENTED_EDGE('',*,*,#226684,.T.); +#226684 = EDGE_CURVE('',#226677,#226685,#226687,.T.); +#226685 = VERTEX_POINT('',#226686); +#226686 = CARTESIAN_POINT('',(90.052364,-59.202919,1.585)); +#226687 = LINE('',#226688,#226689); +#226688 = CARTESIAN_POINT('',(90.052364,-58.352919,1.585)); +#226689 = VECTOR('',#226690,1.); +#226690 = DIRECTION('',(0.,-1.,0.)); +#226691 = ORIENTED_EDGE('',*,*,#226692,.T.); +#226692 = EDGE_CURVE('',#226685,#226693,#226695,.T.); +#226693 = VERTEX_POINT('',#226694); +#226694 = CARTESIAN_POINT('',(90.203289,-59.202919,1.585)); +#226695 = LINE('',#226696,#226697); +#226696 = CARTESIAN_POINT('',(90.052364,-59.202919,1.585)); +#226697 = VECTOR('',#226698,1.); +#226698 = DIRECTION('',(1.,0.,0.)); +#226699 = ORIENTED_EDGE('',*,*,#226700,.T.); +#226700 = EDGE_CURVE('',#226693,#226701,#226703,.T.); +#226701 = VERTEX_POINT('',#226702); +#226702 = CARTESIAN_POINT('',(90.317802,-59.164747,1.585)); +#226703 = LINE('',#226704,#226705); +#226704 = CARTESIAN_POINT('',(90.203289,-59.202919,1.585)); +#226705 = VECTOR('',#226706,1.); +#226706 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#226707 = ORIENTED_EDGE('',*,*,#226708,.T.); +#226708 = EDGE_CURVE('',#226701,#226709,#226711,.T.); +#226709 = VERTEX_POINT('',#226710); +#226710 = CARTESIAN_POINT('',(90.391914,-59.090634,1.585)); +#226711 = LINE('',#226712,#226713); +#226712 = CARTESIAN_POINT('',(90.317802,-59.164747,1.585)); +#226713 = VECTOR('',#226714,1.); +#226714 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#226715 = ORIENTED_EDGE('',*,*,#226716,.T.); +#226716 = EDGE_CURVE('',#226709,#226717,#226719,.T.); +#226717 = VERTEX_POINT('',#226718); +#226718 = CARTESIAN_POINT('',(90.473792,-58.715724,1.585)); +#226719 = CIRCLE('',#226720,0.611719141131); +#226720 = AXIS2_PLACEMENT_3D('',#226721,#226722,#226723); +#226721 = CARTESIAN_POINT('',(89.865379962242,-58.77924643649,1.585)); +#226722 = DIRECTION('',(0.,0.,1.)); +#226723 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#226724 = ORIENTED_EDGE('',*,*,#226725,.T.); +#226725 = EDGE_CURVE('',#226717,#226726,#226728,.T.); +#226726 = VERTEX_POINT('',#226727); +#226727 = CARTESIAN_POINT('',(90.430408,-58.54219,1.585)); +#226728 = LINE('',#226729,#226730); +#226729 = CARTESIAN_POINT('',(90.473792,-58.715724,1.585)); +#226730 = VECTOR('',#226731,1.); +#226731 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#226732 = ORIENTED_EDGE('',*,*,#226733,.T.); +#226733 = EDGE_CURVE('',#226726,#226734,#226736,.T.); +#226734 = VERTEX_POINT('',#226735); +#226735 = CARTESIAN_POINT('',(90.391915,-58.465203,1.585)); +#226736 = LINE('',#226737,#226738); +#226737 = CARTESIAN_POINT('',(90.430408,-58.54219,1.585)); +#226738 = VECTOR('',#226739,1.); +#226739 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#226740 = ORIENTED_EDGE('',*,*,#226741,.T.); +#226741 = EDGE_CURVE('',#226734,#226667,#226742,.T.); +#226742 = LINE('',#226743,#226744); +#226743 = CARTESIAN_POINT('',(90.391915,-58.465203,1.585)); +#226744 = VECTOR('',#226745,1.); +#226745 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#226746 = PLANE('',#226747); +#226747 = AXIS2_PLACEMENT_3D('',#226748,#226749,#226750); +#226748 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226749 = DIRECTION('',(0.,0.,1.)); +#226750 = DIRECTION('',(1.,0.,-0.)); +#226751 = SHELL_BASED_SURFACE_MODEL('',(#226752)); +#226752 = OPEN_SHELL('',(#226753)); +#226753 = ADVANCED_FACE('',(#226754,#226856),#226958,.T.); +#226754 = FACE_BOUND('',#226755,.F.); +#226755 = EDGE_LOOP('',(#226756,#226767,#226775,#226783,#226792,#226800, + #226808,#226817,#226825,#226833,#226842,#226850)); +#226756 = ORIENTED_EDGE('',*,*,#226757,.T.); +#226757 = EDGE_CURVE('',#226758,#226760,#226762,.T.); +#226758 = VERTEX_POINT('',#226759); +#226759 = CARTESIAN_POINT('',(91.985142,-58.26242,1.585)); +#226760 = VERTEX_POINT('',#226761); +#226761 = CARTESIAN_POINT('',(92.35798,-58.267786,1.585)); +#226762 = CIRCLE('',#226763,0.291788488016); +#226763 = AXIS2_PLACEMENT_3D('',#226764,#226765,#226766); +#226764 = CARTESIAN_POINT('',(92.16833086911,-58.48953750256,1.585)); +#226765 = DIRECTION('',(0.,0.,-1.)); +#226766 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#226767 = ORIENTED_EDGE('',*,*,#226768,.T.); +#226768 = EDGE_CURVE('',#226760,#226769,#226771,.T.); +#226769 = VERTEX_POINT('',#226770); +#226770 = CARTESIAN_POINT('',(92.421433,-58.333316,1.585)); +#226771 = LINE('',#226772,#226773); +#226772 = CARTESIAN_POINT('',(92.35798,-58.267786,1.585)); +#226773 = VECTOR('',#226774,1.); +#226774 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#226775 = ORIENTED_EDGE('',*,*,#226776,.T.); +#226776 = EDGE_CURVE('',#226769,#226777,#226779,.T.); +#226777 = VERTEX_POINT('',#226778); +#226778 = CARTESIAN_POINT('',(92.478696,-58.450205,1.585)); +#226779 = LINE('',#226780,#226781); +#226780 = CARTESIAN_POINT('',(92.421433,-58.333316,1.585)); +#226781 = VECTOR('',#226782,1.); +#226782 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#226783 = ORIENTED_EDGE('',*,*,#226784,.T.); +#226784 = EDGE_CURVE('',#226777,#226785,#226787,.T.); +#226785 = VERTEX_POINT('',#226786); +#226786 = CARTESIAN_POINT('',(92.473017,-59.120983,1.585)); +#226787 = CIRCLE('',#226788,0.967158496826); +#226788 = AXIS2_PLACEMENT_3D('',#226789,#226790,#226791); +#226789 = CARTESIAN_POINT('',(91.568749706867,-58.77791417228,1.585)); +#226790 = DIRECTION('',(0.,0.,-1.)); +#226791 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#226792 = ORIENTED_EDGE('',*,*,#226793,.T.); +#226793 = EDGE_CURVE('',#226785,#226794,#226796,.T.); +#226794 = VERTEX_POINT('',#226795); +#226795 = CARTESIAN_POINT('',(92.416067,-59.229963,1.585)); +#226796 = LINE('',#226797,#226798); +#226797 = CARTESIAN_POINT('',(92.473017,-59.120983,1.585)); +#226798 = VECTOR('',#226799,1.); +#226799 = DIRECTION('',(-0.463146784148,-0.886281589752,0.)); +#226800 = ORIENTED_EDGE('',*,*,#226801,.T.); +#226801 = EDGE_CURVE('',#226794,#226802,#226804,.T.); +#226802 = VERTEX_POINT('',#226803); +#226803 = CARTESIAN_POINT('',(92.350537,-59.293417,1.585)); +#226804 = LINE('',#226805,#226806); +#226805 = CARTESIAN_POINT('',(92.416067,-59.229963,1.585)); +#226806 = VECTOR('',#226807,1.); +#226807 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#226808 = ORIENTED_EDGE('',*,*,#226809,.T.); +#226809 = EDGE_CURVE('',#226802,#226810,#226812,.T.); +#226810 = VERTEX_POINT('',#226811); +#226811 = CARTESIAN_POINT('',(91.977698,-59.28805,1.585)); +#226812 = CIRCLE('',#226813,0.290998264264); +#226813 = AXIS2_PLACEMENT_3D('',#226814,#226815,#226816); +#226814 = CARTESIAN_POINT('',(92.167333418158,-59.06732755441,1.585)); +#226815 = DIRECTION('',(-0.,0.,-1.)); +#226816 = DIRECTION('',(0.629569328552,-0.77694430981,-0.)); +#226817 = ORIENTED_EDGE('',*,*,#226818,.T.); +#226818 = EDGE_CURVE('',#226810,#226819,#226821,.T.); +#226819 = VERTEX_POINT('',#226820); +#226820 = CARTESIAN_POINT('',(91.914245,-59.222517,1.585)); +#226821 = LINE('',#226822,#226823); +#226822 = CARTESIAN_POINT('',(91.977698,-59.28805,1.585)); +#226823 = VECTOR('',#226824,1.); +#226824 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#226825 = ORIENTED_EDGE('',*,*,#226826,.T.); +#226826 = EDGE_CURVE('',#226819,#226827,#226829,.T.); +#226827 = VERTEX_POINT('',#226828); +#226828 = CARTESIAN_POINT('',(91.856984,-59.105632,1.585)); +#226829 = LINE('',#226830,#226831); +#226830 = CARTESIAN_POINT('',(91.914245,-59.222517,1.585)); +#226831 = VECTOR('',#226832,1.); +#226832 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#226833 = ORIENTED_EDGE('',*,*,#226834,.T.); +#226834 = EDGE_CURVE('',#226827,#226835,#226837,.T.); +#226835 = VERTEX_POINT('',#226836); +#226836 = CARTESIAN_POINT('',(91.862663,-58.434854,1.585)); +#226837 = CIRCLE('',#226838,0.967158496826); +#226838 = AXIS2_PLACEMENT_3D('',#226839,#226840,#226841); +#226839 = CARTESIAN_POINT('',(92.766930293133,-58.77792282772,1.585)); +#226840 = DIRECTION('',(0.,0.,-1.)); +#226841 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#226842 = ORIENTED_EDGE('',*,*,#226843,.T.); +#226843 = EDGE_CURVE('',#226835,#226844,#226846,.T.); +#226844 = VERTEX_POINT('',#226845); +#226845 = CARTESIAN_POINT('',(91.919612,-58.325873,1.585)); +#226846 = LINE('',#226847,#226848); +#226847 = CARTESIAN_POINT('',(91.862663,-58.434854,1.585)); +#226848 = VECTOR('',#226849,1.); +#226849 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#226850 = ORIENTED_EDGE('',*,*,#226851,.T.); +#226851 = EDGE_CURVE('',#226844,#226758,#226852,.T.); +#226852 = LINE('',#226853,#226854); +#226853 = CARTESIAN_POINT('',(91.919612,-58.325873,1.585)); +#226854 = VECTOR('',#226855,1.); +#226855 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#226856 = FACE_BOUND('',#226857,.F.); +#226857 = EDGE_LOOP('',(#226858,#226869,#226877,#226885,#226894,#226902, + #226910,#226919,#226927,#226935,#226944,#226952)); +#226858 = ORIENTED_EDGE('',*,*,#226859,.T.); +#226859 = EDGE_CURVE('',#226860,#226862,#226864,.T.); +#226860 = VERTEX_POINT('',#226861); +#226861 = CARTESIAN_POINT('',(92.26627,-58.387177,1.585)); +#226862 = VERTEX_POINT('',#226863); +#226863 = CARTESIAN_POINT('',(92.06941,-58.387177,1.585)); +#226864 = CIRCLE('',#226865,0.148516804184); +#226865 = AXIS2_PLACEMENT_3D('',#226866,#226867,#226868); +#226866 = CARTESIAN_POINT('',(92.16784,-58.498392,1.585)); +#226867 = DIRECTION('',(0.,0.,1.)); +#226868 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#226869 = ORIENTED_EDGE('',*,*,#226870,.T.); +#226870 = EDGE_CURVE('',#226862,#226871,#226873,.T.); +#226871 = VERTEX_POINT('',#226872); +#226872 = CARTESIAN_POINT('',(92.039003,-58.417584,1.585)); +#226873 = LINE('',#226874,#226875); +#226874 = CARTESIAN_POINT('',(92.06941,-58.387177,1.585)); +#226875 = VECTOR('',#226876,1.); +#226876 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#226877 = ORIENTED_EDGE('',*,*,#226878,.T.); +#226878 = EDGE_CURVE('',#226871,#226879,#226881,.T.); +#226879 = VERTEX_POINT('',#226880); +#226880 = CARTESIAN_POINT('',(92.000509,-58.494571,1.585)); +#226881 = LINE('',#226882,#226883); +#226882 = CARTESIAN_POINT('',(92.039003,-58.417584,1.585)); +#226883 = VECTOR('',#226884,1.); +#226884 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#226885 = ORIENTED_EDGE('',*,*,#226886,.T.); +#226886 = EDGE_CURVE('',#226879,#226887,#226889,.T.); +#226887 = VERTEX_POINT('',#226888); +#226888 = CARTESIAN_POINT('',(92.000509,-59.061266,1.585)); +#226889 = CIRCLE('',#226890,0.815450468384); +#226890 = AXIS2_PLACEMENT_3D('',#226891,#226892,#226893); +#226891 = CARTESIAN_POINT('',(92.765148562559,-58.7779185,1.585)); +#226892 = DIRECTION('',(0.,0.,1.)); +#226893 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#226894 = ORIENTED_EDGE('',*,*,#226895,.T.); +#226895 = EDGE_CURVE('',#226887,#226896,#226898,.T.); +#226896 = VERTEX_POINT('',#226897); +#226897 = CARTESIAN_POINT('',(92.039003,-59.138253,1.585)); +#226898 = LINE('',#226899,#226900); +#226899 = CARTESIAN_POINT('',(92.000509,-59.061266,1.585)); +#226900 = VECTOR('',#226901,1.); +#226901 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#226902 = ORIENTED_EDGE('',*,*,#226903,.T.); +#226903 = EDGE_CURVE('',#226896,#226904,#226906,.T.); +#226904 = VERTEX_POINT('',#226905); +#226905 = CARTESIAN_POINT('',(92.06941,-59.168661,1.585)); +#226906 = LINE('',#226907,#226908); +#226907 = CARTESIAN_POINT('',(92.039003,-59.138253,1.585)); +#226908 = VECTOR('',#226909,1.); +#226909 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#226910 = ORIENTED_EDGE('',*,*,#226911,.T.); +#226911 = EDGE_CURVE('',#226904,#226912,#226914,.T.); +#226912 = VERTEX_POINT('',#226913); +#226913 = CARTESIAN_POINT('',(92.266269,-59.168661,1.585)); +#226914 = CIRCLE('',#226915,0.14851572397); +#226915 = AXIS2_PLACEMENT_3D('',#226916,#226917,#226918); +#226916 = CARTESIAN_POINT('',(92.1678395,-59.057447,1.585)); +#226917 = DIRECTION('',(0.,0.,1.)); +#226918 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#226919 = ORIENTED_EDGE('',*,*,#226920,.T.); +#226920 = EDGE_CURVE('',#226912,#226921,#226923,.T.); +#226921 = VERTEX_POINT('',#226922); +#226922 = CARTESIAN_POINT('',(92.296676,-59.138253,1.585)); +#226923 = LINE('',#226924,#226925); +#226924 = CARTESIAN_POINT('',(92.266269,-59.168661,1.585)); +#226925 = VECTOR('',#226926,1.); +#226926 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#226927 = ORIENTED_EDGE('',*,*,#226928,.T.); +#226928 = EDGE_CURVE('',#226921,#226929,#226931,.T.); +#226929 = VERTEX_POINT('',#226930); +#226930 = CARTESIAN_POINT('',(92.33517,-59.061266,1.585)); +#226931 = LINE('',#226932,#226933); +#226932 = CARTESIAN_POINT('',(92.296676,-59.138253,1.585)); +#226933 = VECTOR('',#226934,1.); +#226934 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#226935 = ORIENTED_EDGE('',*,*,#226936,.T.); +#226936 = EDGE_CURVE('',#226929,#226937,#226939,.T.); +#226937 = VERTEX_POINT('',#226938); +#226938 = CARTESIAN_POINT('',(92.33517,-58.494571,1.585)); +#226939 = CIRCLE('',#226940,0.815433004022); +#226940 = AXIS2_PLACEMENT_3D('',#226941,#226942,#226943); +#226941 = CARTESIAN_POINT('',(91.57054906235,-58.7779185,1.585)); +#226942 = DIRECTION('',(0.,-0.,1.)); +#226943 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#226944 = ORIENTED_EDGE('',*,*,#226945,.T.); +#226945 = EDGE_CURVE('',#226937,#226946,#226948,.T.); +#226946 = VERTEX_POINT('',#226947); +#226947 = CARTESIAN_POINT('',(92.296677,-58.417584,1.585)); +#226948 = LINE('',#226949,#226950); +#226949 = CARTESIAN_POINT('',(92.33517,-58.494571,1.585)); +#226950 = VECTOR('',#226951,1.); +#226951 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#226952 = ORIENTED_EDGE('',*,*,#226953,.T.); +#226953 = EDGE_CURVE('',#226946,#226860,#226954,.T.); +#226954 = LINE('',#226955,#226956); +#226955 = CARTESIAN_POINT('',(92.296677,-58.417584,1.585)); +#226956 = VECTOR('',#226957,1.); +#226957 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#226958 = PLANE('',#226959); +#226959 = AXIS2_PLACEMENT_3D('',#226960,#226961,#226962); +#226960 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226961 = DIRECTION('',(0.,0.,1.)); +#226962 = DIRECTION('',(1.,0.,-0.)); +#226963 = SHELL_BASED_SURFACE_MODEL('',(#226964)); +#226964 = OPEN_SHELL('',(#226965)); +#226965 = ADVANCED_FACE('',(#226966,#227051),#227110,.T.); +#226966 = FACE_BOUND('',#226967,.F.); +#226967 = EDGE_LOOP('',(#226968,#226979,#226987,#226995,#227003,#227012, + #227020,#227029,#227037,#227045)); +#226968 = ORIENTED_EDGE('',*,*,#226969,.T.); +#226969 = EDGE_CURVE('',#226970,#226972,#226974,.T.); +#226970 = VERTEX_POINT('',#226971); +#226971 = CARTESIAN_POINT('',(206.151866,-58.224267,1.585)); +#226972 = VERTEX_POINT('',#226973); +#226973 = CARTESIAN_POINT('',(206.635776,-58.295163,1.585)); +#226974 = CIRCLE('',#226975,0.34461174713); +#226975 = AXIS2_PLACEMENT_3D('',#226976,#226977,#226978); +#226976 = CARTESIAN_POINT('',(206.35862294377,-58.49996397579,1.585)); +#226977 = DIRECTION('',(0.,0.,-1.)); +#226978 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#226979 = ORIENTED_EDGE('',*,*,#226980,.T.); +#226980 = EDGE_CURVE('',#226972,#226981,#226983,.T.); +#226981 = VERTEX_POINT('',#226982); +#226982 = CARTESIAN_POINT('',(206.693837,-58.41561,1.585)); +#226983 = LINE('',#226984,#226985); +#226984 = CARTESIAN_POINT('',(206.635776,-58.295163,1.585)); +#226985 = VECTOR('',#226986,1.); +#226986 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#226987 = ORIENTED_EDGE('',*,*,#226988,.T.); +#226988 = EDGE_CURVE('',#226981,#226989,#226991,.T.); +#226989 = VERTEX_POINT('',#226990); +#226990 = CARTESIAN_POINT('',(206.695278,-58.736194,1.585)); +#226991 = LINE('',#226992,#226993); +#226992 = CARTESIAN_POINT('',(206.693837,-58.41561,1.585)); +#226993 = VECTOR('',#226994,1.); +#226994 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#226995 = ORIENTED_EDGE('',*,*,#226996,.T.); +#226996 = EDGE_CURVE('',#226989,#226997,#226999,.T.); +#226997 = VERTEX_POINT('',#226998); +#226998 = CARTESIAN_POINT('',(207.111101,-58.737635,1.585)); +#226999 = LINE('',#227000,#227001); +#227000 = CARTESIAN_POINT('',(206.695278,-58.736194,1.585)); +#227001 = VECTOR('',#227002,1.); +#227002 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#227003 = ORIENTED_EDGE('',*,*,#227004,.T.); +#227004 = EDGE_CURVE('',#226997,#227005,#227007,.T.); +#227005 = VERTEX_POINT('',#227006); +#227006 = CARTESIAN_POINT('',(207.096469,-58.886194,1.585)); +#227007 = CIRCLE('',#227008,7.500006711464E-02); +#227008 = AXIS2_PLACEMENT_3D('',#227009,#227010,#227011); +#227009 = CARTESIAN_POINT('',(207.09646906711,-58.81119393288,1.585)); +#227010 = DIRECTION('',(0.,0.,-1.)); +#227011 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227012 = ORIENTED_EDGE('',*,*,#227013,.T.); +#227013 = EDGE_CURVE('',#227005,#227014,#227016,.T.); +#227014 = VERTEX_POINT('',#227015); +#227015 = CARTESIAN_POINT('',(206.081837,-58.884753,1.585)); +#227016 = LINE('',#227017,#227018); +#227017 = CARTESIAN_POINT('',(207.096469,-58.886194,1.585)); +#227018 = VECTOR('',#227019,1.); +#227019 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#227020 = ORIENTED_EDGE('',*,*,#227021,.T.); +#227021 = EDGE_CURVE('',#227014,#227022,#227024,.T.); +#227022 = VERTEX_POINT('',#227023); +#227023 = CARTESIAN_POINT('',(206.021469,-58.811194,1.585)); +#227024 = CIRCLE('',#227025,7.500074938986E-02); +#227025 = AXIS2_PLACEMENT_3D('',#227026,#227027,#227028); +#227026 = CARTESIAN_POINT('',(206.09646974938,-58.81119353389,1.585)); +#227027 = DIRECTION('',(0.,0.,-1.)); +#227028 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#227029 = ORIENTED_EDGE('',*,*,#227030,.T.); +#227030 = EDGE_CURVE('',#227022,#227031,#227033,.T.); +#227031 = VERTEX_POINT('',#227032); +#227032 = CARTESIAN_POINT('',(206.024132,-58.410433,1.585)); +#227033 = LINE('',#227034,#227035); +#227034 = CARTESIAN_POINT('',(206.021469,-58.811194,1.585)); +#227035 = VECTOR('',#227036,1.); +#227036 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#227037 = ORIENTED_EDGE('',*,*,#227038,.T.); +#227038 = EDGE_CURVE('',#227031,#227039,#227041,.T.); +#227039 = VERTEX_POINT('',#227040); +#227040 = CARTESIAN_POINT('',(206.086336,-58.28772,1.585)); +#227041 = LINE('',#227042,#227043); +#227042 = CARTESIAN_POINT('',(206.024132,-58.410433,1.585)); +#227043 = VECTOR('',#227044,1.); +#227044 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#227045 = ORIENTED_EDGE('',*,*,#227046,.T.); +#227046 = EDGE_CURVE('',#227039,#226970,#227047,.T.); +#227047 = LINE('',#227048,#227049); +#227048 = CARTESIAN_POINT('',(206.086336,-58.28772,1.585)); +#227049 = VECTOR('',#227050,1.); +#227050 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#227051 = FACE_BOUND('',#227052,.F.); +#227052 = EDGE_LOOP('',(#227053,#227064,#227072,#227080,#227088,#227096, + #227104)); +#227053 = ORIENTED_EDGE('',*,*,#227054,.T.); +#227054 = EDGE_CURVE('',#227055,#227057,#227059,.T.); +#227055 = VERTEX_POINT('',#227056); +#227056 = CARTESIAN_POINT('',(206.480613,-58.349024,1.585)); +#227057 = VERTEX_POINT('',#227058); +#227058 = CARTESIAN_POINT('',(206.205727,-58.379431,1.585)); +#227059 = CIRCLE('',#227060,0.198386215365); +#227060 = AXIS2_PLACEMENT_3D('',#227061,#227062,#227063); +#227061 = CARTESIAN_POINT('',(206.35880995783,-58.5056161753,1.585)); +#227062 = DIRECTION('',(0.,0.,1.)); +#227063 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#227064 = ORIENTED_EDGE('',*,*,#227065,.T.); +#227065 = EDGE_CURVE('',#227057,#227066,#227068,.T.); +#227066 = VERTEX_POINT('',#227067); +#227067 = CARTESIAN_POINT('',(206.171469,-58.447947,1.585)); +#227068 = LINE('',#227069,#227070); +#227069 = CARTESIAN_POINT('',(206.205727,-58.379431,1.585)); +#227070 = VECTOR('',#227071,1.); +#227071 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#227072 = ORIENTED_EDGE('',*,*,#227073,.T.); +#227073 = EDGE_CURVE('',#227066,#227074,#227076,.T.); +#227074 = VERTEX_POINT('',#227075); +#227075 = CARTESIAN_POINT('',(206.171469,-58.736194,1.585)); +#227076 = LINE('',#227077,#227078); +#227077 = CARTESIAN_POINT('',(206.171469,-58.447947,1.585)); +#227078 = VECTOR('',#227079,1.); +#227079 = DIRECTION('',(0.,-1.,0.)); +#227080 = ORIENTED_EDGE('',*,*,#227081,.T.); +#227081 = EDGE_CURVE('',#227074,#227082,#227084,.T.); +#227082 = VERTEX_POINT('',#227083); +#227083 = CARTESIAN_POINT('',(206.545278,-58.736194,1.585)); +#227084 = LINE('',#227085,#227086); +#227085 = CARTESIAN_POINT('',(206.171469,-58.736194,1.585)); +#227086 = VECTOR('',#227087,1.); +#227087 = DIRECTION('',(1.,0.,0.)); +#227088 = ORIENTED_EDGE('',*,*,#227089,.T.); +#227089 = EDGE_CURVE('',#227082,#227090,#227092,.T.); +#227090 = VERTEX_POINT('',#227091); +#227091 = CARTESIAN_POINT('',(206.545278,-58.447947,1.585)); +#227092 = LINE('',#227093,#227094); +#227093 = CARTESIAN_POINT('',(206.545278,-58.736194,1.585)); +#227094 = VECTOR('',#227095,1.); +#227095 = DIRECTION('',(0.,1.,0.)); +#227096 = ORIENTED_EDGE('',*,*,#227097,.T.); +#227097 = EDGE_CURVE('',#227090,#227098,#227100,.T.); +#227098 = VERTEX_POINT('',#227099); +#227099 = CARTESIAN_POINT('',(206.51102,-58.379431,1.585)); +#227100 = LINE('',#227101,#227102); +#227101 = CARTESIAN_POINT('',(206.545278,-58.447947,1.585)); +#227102 = VECTOR('',#227103,1.); +#227103 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#227104 = ORIENTED_EDGE('',*,*,#227105,.T.); +#227105 = EDGE_CURVE('',#227098,#227055,#227106,.T.); +#227106 = LINE('',#227107,#227108); +#227107 = CARTESIAN_POINT('',(206.51102,-58.379431,1.585)); +#227108 = VECTOR('',#227109,1.); +#227109 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#227110 = PLANE('',#227111); +#227111 = AXIS2_PLACEMENT_3D('',#227112,#227113,#227114); +#227112 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227113 = DIRECTION('',(0.,0.,1.)); +#227114 = DIRECTION('',(1.,0.,-0.)); +#227115 = SHELL_BASED_SURFACE_MODEL('',(#227116)); +#227116 = OPEN_SHELL('',(#227117)); +#227117 = ADVANCED_FACE('',(#227118),#227154,.T.); +#227118 = FACE_BOUND('',#227119,.F.); +#227119 = EDGE_LOOP('',(#227120,#227131,#227139,#227148)); +#227120 = ORIENTED_EDGE('',*,*,#227121,.T.); +#227121 = EDGE_CURVE('',#227122,#227124,#227126,.T.); +#227122 = VERTEX_POINT('',#227123); +#227123 = CARTESIAN_POINT('',(163.629392,-58.8606,1.585)); +#227124 = VERTEX_POINT('',#227125); +#227125 = CARTESIAN_POINT('',(163.629392,-58.7406,1.585)); +#227126 = CIRCLE('',#227127,6.000000000042E-02); +#227127 = AXIS2_PLACEMENT_3D('',#227128,#227129,#227130); +#227128 = CARTESIAN_POINT('',(163.62939177441,-58.8006,1.585)); +#227129 = DIRECTION('',(0.,0.,-1.)); +#227130 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#227131 = ORIENTED_EDGE('',*,*,#227132,.T.); +#227132 = EDGE_CURVE('',#227124,#227133,#227135,.T.); +#227133 = VERTEX_POINT('',#227134); +#227134 = CARTESIAN_POINT('',(164.103908,-58.7406,1.585)); +#227135 = LINE('',#227136,#227137); +#227136 = CARTESIAN_POINT('',(163.629392,-58.7406,1.585)); +#227137 = VECTOR('',#227138,1.); +#227138 = DIRECTION('',(1.,0.,0.)); +#227139 = ORIENTED_EDGE('',*,*,#227140,.T.); +#227140 = EDGE_CURVE('',#227133,#227141,#227143,.T.); +#227141 = VERTEX_POINT('',#227142); +#227142 = CARTESIAN_POINT('',(164.103908,-58.8606,1.585)); +#227143 = CIRCLE('',#227144,6.000000000043E-02); +#227144 = AXIS2_PLACEMENT_3D('',#227145,#227146,#227147); +#227145 = CARTESIAN_POINT('',(164.10390822558,-58.8006,1.585)); +#227146 = DIRECTION('',(0.,0.,-1.)); +#227147 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#227148 = ORIENTED_EDGE('',*,*,#227149,.T.); +#227149 = EDGE_CURVE('',#227141,#227122,#227150,.T.); +#227150 = LINE('',#227151,#227152); +#227151 = CARTESIAN_POINT('',(164.103908,-58.8606,1.585)); +#227152 = VECTOR('',#227153,1.); +#227153 = DIRECTION('',(-1.,0.,0.)); +#227154 = PLANE('',#227155); +#227155 = AXIS2_PLACEMENT_3D('',#227156,#227157,#227158); +#227156 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227157 = DIRECTION('',(0.,0.,1.)); +#227158 = DIRECTION('',(1.,0.,-0.)); +#227159 = SHELL_BASED_SURFACE_MODEL('',(#227160)); +#227160 = OPEN_SHELL('',(#227161)); +#227161 = ADVANCED_FACE('',(#227162),#227198,.T.); +#227162 = FACE_BOUND('',#227163,.F.); +#227163 = EDGE_LOOP('',(#227164,#227175,#227183,#227192)); +#227164 = ORIENTED_EDGE('',*,*,#227165,.T.); +#227165 = EDGE_CURVE('',#227166,#227168,#227170,.T.); +#227166 = VERTEX_POINT('',#227167); +#227167 = CARTESIAN_POINT('',(167.129392,-58.8606,1.585)); +#227168 = VERTEX_POINT('',#227169); +#227169 = CARTESIAN_POINT('',(167.129392,-58.7406,1.585)); +#227170 = CIRCLE('',#227171,6.000000000042E-02); +#227171 = AXIS2_PLACEMENT_3D('',#227172,#227173,#227174); +#227172 = CARTESIAN_POINT('',(167.12939177441,-58.8006,1.585)); +#227173 = DIRECTION('',(0.,0.,-1.)); +#227174 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#227175 = ORIENTED_EDGE('',*,*,#227176,.T.); +#227176 = EDGE_CURVE('',#227168,#227177,#227179,.T.); +#227177 = VERTEX_POINT('',#227178); +#227178 = CARTESIAN_POINT('',(167.603908,-58.7406,1.585)); +#227179 = LINE('',#227180,#227181); +#227180 = CARTESIAN_POINT('',(167.129392,-58.7406,1.585)); +#227181 = VECTOR('',#227182,1.); +#227182 = DIRECTION('',(1.,0.,0.)); +#227183 = ORIENTED_EDGE('',*,*,#227184,.T.); +#227184 = EDGE_CURVE('',#227177,#227185,#227187,.T.); +#227185 = VERTEX_POINT('',#227186); +#227186 = CARTESIAN_POINT('',(167.603908,-58.8606,1.585)); +#227187 = CIRCLE('',#227188,6.000000000043E-02); +#227188 = AXIS2_PLACEMENT_3D('',#227189,#227190,#227191); +#227189 = CARTESIAN_POINT('',(167.60390822558,-58.8006,1.585)); +#227190 = DIRECTION('',(0.,0.,-1.)); +#227191 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#227192 = ORIENTED_EDGE('',*,*,#227193,.T.); +#227193 = EDGE_CURVE('',#227185,#227166,#227194,.T.); +#227194 = LINE('',#227195,#227196); +#227195 = CARTESIAN_POINT('',(167.603908,-58.8606,1.585)); +#227196 = VECTOR('',#227197,1.); +#227197 = DIRECTION('',(-1.,0.,0.)); +#227198 = PLANE('',#227199); +#227199 = AXIS2_PLACEMENT_3D('',#227200,#227201,#227202); +#227200 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227201 = DIRECTION('',(0.,0.,1.)); +#227202 = DIRECTION('',(1.,0.,-0.)); +#227203 = SHELL_BASED_SURFACE_MODEL('',(#227204)); +#227204 = OPEN_SHELL('',(#227205)); +#227205 = ADVANCED_FACE('',(#227206),#227242,.T.); +#227206 = FACE_BOUND('',#227207,.F.); +#227207 = EDGE_LOOP('',(#227208,#227219,#227227,#227236)); +#227208 = ORIENTED_EDGE('',*,*,#227209,.T.); +#227209 = EDGE_CURVE('',#227210,#227212,#227214,.T.); +#227210 = VERTEX_POINT('',#227211); +#227211 = CARTESIAN_POINT('',(173.954392,-58.8606,1.585)); +#227212 = VERTEX_POINT('',#227213); +#227213 = CARTESIAN_POINT('',(173.954392,-58.7406,1.585)); +#227214 = CIRCLE('',#227215,6.000000000042E-02); +#227215 = AXIS2_PLACEMENT_3D('',#227216,#227217,#227218); +#227216 = CARTESIAN_POINT('',(173.95439177441,-58.8006,1.585)); +#227217 = DIRECTION('',(0.,0.,-1.)); +#227218 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#227219 = ORIENTED_EDGE('',*,*,#227220,.T.); +#227220 = EDGE_CURVE('',#227212,#227221,#227223,.T.); +#227221 = VERTEX_POINT('',#227222); +#227222 = CARTESIAN_POINT('',(174.428908,-58.7406,1.585)); +#227223 = LINE('',#227224,#227225); +#227224 = CARTESIAN_POINT('',(173.954392,-58.7406,1.585)); +#227225 = VECTOR('',#227226,1.); +#227226 = DIRECTION('',(1.,0.,0.)); +#227227 = ORIENTED_EDGE('',*,*,#227228,.T.); +#227228 = EDGE_CURVE('',#227221,#227229,#227231,.T.); +#227229 = VERTEX_POINT('',#227230); +#227230 = CARTESIAN_POINT('',(174.428908,-58.8606,1.585)); +#227231 = CIRCLE('',#227232,6.000000000043E-02); +#227232 = AXIS2_PLACEMENT_3D('',#227233,#227234,#227235); +#227233 = CARTESIAN_POINT('',(174.42890822558,-58.8006,1.585)); +#227234 = DIRECTION('',(0.,0.,-1.)); +#227235 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#227236 = ORIENTED_EDGE('',*,*,#227237,.T.); +#227237 = EDGE_CURVE('',#227229,#227210,#227238,.T.); +#227238 = LINE('',#227239,#227240); +#227239 = CARTESIAN_POINT('',(174.428908,-58.8606,1.585)); +#227240 = VECTOR('',#227241,1.); +#227241 = DIRECTION('',(-1.,0.,0.)); +#227242 = PLANE('',#227243); +#227243 = AXIS2_PLACEMENT_3D('',#227244,#227245,#227246); +#227244 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227245 = DIRECTION('',(0.,0.,1.)); +#227246 = DIRECTION('',(1.,0.,-0.)); +#227247 = SHELL_BASED_SURFACE_MODEL('',(#227248)); +#227248 = OPEN_SHELL('',(#227249)); +#227249 = ADVANCED_FACE('',(#227250),#227286,.T.); +#227250 = FACE_BOUND('',#227251,.F.); +#227251 = EDGE_LOOP('',(#227252,#227263,#227271,#227280)); +#227252 = ORIENTED_EDGE('',*,*,#227253,.T.); +#227253 = EDGE_CURVE('',#227254,#227256,#227258,.T.); +#227254 = VERTEX_POINT('',#227255); +#227255 = CARTESIAN_POINT('',(177.954392,-58.8606,1.585)); +#227256 = VERTEX_POINT('',#227257); +#227257 = CARTESIAN_POINT('',(177.954392,-58.7406,1.585)); +#227258 = CIRCLE('',#227259,6.000000000042E-02); +#227259 = AXIS2_PLACEMENT_3D('',#227260,#227261,#227262); +#227260 = CARTESIAN_POINT('',(177.95439177441,-58.8006,1.585)); +#227261 = DIRECTION('',(0.,0.,-1.)); +#227262 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#227263 = ORIENTED_EDGE('',*,*,#227264,.T.); +#227264 = EDGE_CURVE('',#227256,#227265,#227267,.T.); +#227265 = VERTEX_POINT('',#227266); +#227266 = CARTESIAN_POINT('',(178.428908,-58.7406,1.585)); +#227267 = LINE('',#227268,#227269); +#227268 = CARTESIAN_POINT('',(177.954392,-58.7406,1.585)); +#227269 = VECTOR('',#227270,1.); +#227270 = DIRECTION('',(1.,0.,0.)); +#227271 = ORIENTED_EDGE('',*,*,#227272,.T.); +#227272 = EDGE_CURVE('',#227265,#227273,#227275,.T.); +#227273 = VERTEX_POINT('',#227274); +#227274 = CARTESIAN_POINT('',(178.428908,-58.8606,1.585)); +#227275 = CIRCLE('',#227276,6.000000000043E-02); +#227276 = AXIS2_PLACEMENT_3D('',#227277,#227278,#227279); +#227277 = CARTESIAN_POINT('',(178.42890822558,-58.8006,1.585)); +#227278 = DIRECTION('',(0.,0.,-1.)); +#227279 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#227280 = ORIENTED_EDGE('',*,*,#227281,.T.); +#227281 = EDGE_CURVE('',#227273,#227254,#227282,.T.); +#227282 = LINE('',#227283,#227284); +#227283 = CARTESIAN_POINT('',(178.428908,-58.8606,1.585)); +#227284 = VECTOR('',#227285,1.); +#227285 = DIRECTION('',(-1.,0.,0.)); +#227286 = PLANE('',#227287); +#227287 = AXIS2_PLACEMENT_3D('',#227288,#227289,#227290); +#227288 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227289 = DIRECTION('',(0.,0.,1.)); +#227290 = DIRECTION('',(1.,0.,-0.)); +#227291 = SHELL_BASED_SURFACE_MODEL('',(#227292)); +#227292 = OPEN_SHELL('',(#227293)); +#227293 = ADVANCED_FACE('',(#227294),#227371,.T.); +#227294 = FACE_BOUND('',#227295,.F.); +#227295 = EDGE_LOOP('',(#227296,#227307,#227315,#227324,#227332,#227341, + #227349,#227357,#227365)); +#227296 = ORIENTED_EDGE('',*,*,#227297,.T.); +#227297 = EDGE_CURVE('',#227298,#227300,#227302,.T.); +#227298 = VERTEX_POINT('',#227299); +#227299 = CARTESIAN_POINT('',(154.994761,-57.926035,1.585)); +#227300 = VERTEX_POINT('',#227301); +#227301 = CARTESIAN_POINT('',(155.080152,-57.859764,1.585)); +#227302 = CIRCLE('',#227303,6.499990070434E-02); +#227303 = AXIS2_PLACEMENT_3D('',#227304,#227305,#227306); +#227304 = CARTESIAN_POINT('',(155.05959745813,-57.92142839734,1.585)); +#227305 = DIRECTION('',(0.,0.,-1.)); +#227306 = DIRECTION('',(-0.997485495103,-7.0870918291E-02,-0.)); +#227307 = ORIENTED_EDGE('',*,*,#227308,.T.); +#227308 = EDGE_CURVE('',#227300,#227309,#227311,.T.); +#227309 = VERTEX_POINT('',#227310); +#227310 = CARTESIAN_POINT('',(155.980152,-58.159763,1.585)); +#227311 = LINE('',#227312,#227313); +#227312 = CARTESIAN_POINT('',(155.080152,-57.859764,1.585)); +#227313 = VECTOR('',#227314,1.); +#227314 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#227315 = ORIENTED_EDGE('',*,*,#227316,.T.); +#227316 = EDGE_CURVE('',#227309,#227317,#227319,.T.); +#227317 = VERTEX_POINT('',#227318); +#227318 = CARTESIAN_POINT('',(155.980152,-58.283093,1.585)); +#227319 = CIRCLE('',#227320,6.500111611217E-02); +#227320 = AXIS2_PLACEMENT_3D('',#227321,#227322,#227323); +#227321 = CARTESIAN_POINT('',(155.95959542268,-58.221428,1.585)); +#227322 = DIRECTION('',(0.,0.,-1.)); +#227323 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#227324 = ORIENTED_EDGE('',*,*,#227325,.T.); +#227325 = EDGE_CURVE('',#227317,#227326,#227328,.T.); +#227326 = VERTEX_POINT('',#227327); +#227327 = CARTESIAN_POINT('',(155.080152,-58.583092,1.585)); +#227328 = LINE('',#227329,#227330); +#227329 = CARTESIAN_POINT('',(155.980152,-58.283093,1.585)); +#227330 = VECTOR('',#227331,1.); +#227331 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#227332 = ORIENTED_EDGE('',*,*,#227333,.T.); +#227333 = EDGE_CURVE('',#227326,#227334,#227336,.T.); +#227334 = VERTEX_POINT('',#227335); +#227335 = CARTESIAN_POINT('',(155.039042,-58.459764,1.585)); +#227336 = CIRCLE('',#227337,6.499966862238E-02); +#227337 = AXIS2_PLACEMENT_3D('',#227338,#227339,#227340); +#227338 = CARTESIAN_POINT('',(155.05959712923,-58.52142795692,1.585)); +#227339 = DIRECTION('',(0.,0.,-1.)); +#227340 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#227341 = ORIENTED_EDGE('',*,*,#227342,.T.); +#227342 = EDGE_CURVE('',#227334,#227343,#227345,.T.); +#227343 = VERTEX_POINT('',#227344); +#227344 = CARTESIAN_POINT('',(155.75405,-58.221428,1.585)); +#227345 = LINE('',#227346,#227347); +#227346 = CARTESIAN_POINT('',(155.039042,-58.459764,1.585)); +#227347 = VECTOR('',#227348,1.); +#227348 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#227349 = ORIENTED_EDGE('',*,*,#227350,.T.); +#227350 = EDGE_CURVE('',#227343,#227351,#227353,.T.); +#227351 = VERTEX_POINT('',#227352); +#227352 = CARTESIAN_POINT('',(155.039042,-57.983092,1.585)); +#227353 = LINE('',#227354,#227355); +#227354 = CARTESIAN_POINT('',(155.75405,-58.221428,1.585)); +#227355 = VECTOR('',#227356,1.); +#227356 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#227357 = ORIENTED_EDGE('',*,*,#227358,.T.); +#227358 = EDGE_CURVE('',#227351,#227359,#227361,.T.); +#227359 = VERTEX_POINT('',#227360); +#227360 = CARTESIAN_POINT('',(155.017009,-57.970532,1.585)); +#227361 = LINE('',#227362,#227363); +#227362 = CARTESIAN_POINT('',(155.039042,-57.983092,1.585)); +#227363 = VECTOR('',#227364,1.); +#227364 = DIRECTION('',(-0.868757082859,0.495238458708,0.)); +#227365 = ORIENTED_EDGE('',*,*,#227366,.T.); +#227366 = EDGE_CURVE('',#227359,#227298,#227367,.T.); +#227367 = LINE('',#227368,#227369); +#227368 = CARTESIAN_POINT('',(155.017009,-57.970532,1.585)); +#227369 = VECTOR('',#227370,1.); +#227370 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#227371 = PLANE('',#227372); +#227372 = AXIS2_PLACEMENT_3D('',#227373,#227374,#227375); +#227373 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227374 = DIRECTION('',(0.,0.,1.)); +#227375 = DIRECTION('',(1.,0.,-0.)); +#227376 = SHELL_BASED_SURFACE_MODEL('',(#227377)); +#227377 = OPEN_SHELL('',(#227378)); +#227378 = ADVANCED_FACE('',(#227379,#227480),#227555,.T.); +#227379 = FACE_BOUND('',#227380,.F.); +#227380 = EDGE_LOOP('',(#227381,#227392,#227400,#227408,#227416,#227424, + #227432,#227441,#227449,#227458,#227466,#227474)); +#227381 = ORIENTED_EDGE('',*,*,#227382,.T.); +#227382 = EDGE_CURVE('',#227383,#227385,#227387,.T.); +#227383 = VERTEX_POINT('',#227384); +#227384 = CARTESIAN_POINT('',(152.50087,-57.983961,1.585)); +#227385 = VERTEX_POINT('',#227386); +#227386 = CARTESIAN_POINT('',(152.931693,-57.886552,1.585)); +#227387 = CIRCLE('',#227388,0.670538401945); +#227388 = AXIS2_PLACEMENT_3D('',#227389,#227390,#227391); +#227389 = CARTESIAN_POINT('',(152.85590657351,-58.55279382249,1.585)); +#227390 = DIRECTION('',(0.,0.,-1.)); +#227391 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#227392 = ORIENTED_EDGE('',*,*,#227393,.T.); +#227393 = EDGE_CURVE('',#227385,#227394,#227396,.T.); +#227394 = VERTEX_POINT('',#227395); +#227395 = CARTESIAN_POINT('',(153.12438,-57.934718,1.585)); +#227396 = LINE('',#227397,#227398); +#227397 = CARTESIAN_POINT('',(152.931693,-57.886552,1.585)); +#227398 = VECTOR('',#227399,1.); +#227399 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#227400 = ORIENTED_EDGE('',*,*,#227401,.T.); +#227401 = EDGE_CURVE('',#227394,#227402,#227404,.T.); +#227402 = VERTEX_POINT('',#227403); +#227403 = CARTESIAN_POINT('',(153.226987,-57.989751,1.585)); +#227404 = LINE('',#227405,#227406); +#227405 = CARTESIAN_POINT('',(153.12438,-57.934718,1.585)); +#227406 = VECTOR('',#227407,1.); +#227407 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#227408 = ORIENTED_EDGE('',*,*,#227409,.T.); +#227409 = EDGE_CURVE('',#227402,#227410,#227412,.T.); +#227410 = VERTEX_POINT('',#227411); +#227411 = CARTESIAN_POINT('',(153.320999,-58.087884,1.585)); +#227412 = LINE('',#227413,#227414); +#227413 = CARTESIAN_POINT('',(153.226987,-57.989751,1.585)); +#227414 = VECTOR('',#227415,1.); +#227415 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#227416 = ORIENTED_EDGE('',*,*,#227417,.T.); +#227417 = EDGE_CURVE('',#227410,#227418,#227420,.T.); +#227418 = VERTEX_POINT('',#227419); +#227419 = CARTESIAN_POINT('',(153.372563,-58.239776,1.585)); +#227420 = LINE('',#227421,#227422); +#227421 = CARTESIAN_POINT('',(153.320999,-58.087884,1.585)); +#227422 = VECTOR('',#227423,1.); +#227423 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#227424 = ORIENTED_EDGE('',*,*,#227425,.T.); +#227425 = EDGE_CURVE('',#227418,#227426,#227428,.T.); +#227426 = VERTEX_POINT('',#227427); +#227427 = CARTESIAN_POINT('',(153.374597,-58.464285,1.585)); +#227428 = LINE('',#227429,#227430); +#227429 = CARTESIAN_POINT('',(153.372563,-58.239776,1.585)); +#227430 = VECTOR('',#227431,1.); +#227431 = DIRECTION('',(9.059398644723E-03,-0.999958962806,0.)); +#227432 = ORIENTED_EDGE('',*,*,#227433,.T.); +#227433 = EDGE_CURVE('',#227426,#227434,#227436,.T.); +#227434 = VERTEX_POINT('',#227435); +#227435 = CARTESIAN_POINT('',(153.309597,-58.529285,1.585)); +#227436 = CIRCLE('',#227437,6.500103935382E-02); +#227437 = AXIS2_PLACEMENT_3D('',#227438,#227439,#227440); +#227438 = CARTESIAN_POINT('',(153.30959596065,-58.46428396065,1.585)); +#227439 = DIRECTION('',(0.,0.,-1.)); +#227440 = DIRECTION('',(0.999999999872,-1.59896755084E-05,0.)); +#227441 = ORIENTED_EDGE('',*,*,#227442,.T.); +#227442 = EDGE_CURVE('',#227434,#227443,#227445,.T.); +#227443 = VERTEX_POINT('',#227444); +#227444 = CARTESIAN_POINT('',(152.409597,-58.529285,1.585)); +#227445 = LINE('',#227446,#227447); +#227446 = CARTESIAN_POINT('',(153.309597,-58.529285,1.585)); +#227447 = VECTOR('',#227448,1.); +#227448 = DIRECTION('',(-1.,0.,0.)); +#227449 = ORIENTED_EDGE('',*,*,#227450,.T.); +#227450 = EDGE_CURVE('',#227443,#227451,#227453,.T.); +#227451 = VERTEX_POINT('',#227452); +#227452 = CARTESIAN_POINT('',(152.344597,-58.464285,1.585)); +#227453 = CIRCLE('',#227454,6.500103935389E-02); +#227454 = AXIS2_PLACEMENT_3D('',#227455,#227456,#227457); +#227455 = CARTESIAN_POINT('',(152.40959803934,-58.46428396065,1.585)); +#227456 = DIRECTION('',(0.,0.,-1.)); +#227457 = DIRECTION('',(-1.59896764922E-05,-0.999999999872,-0.)); +#227458 = ORIENTED_EDGE('',*,*,#227459,.T.); +#227459 = EDGE_CURVE('',#227451,#227460,#227462,.T.); +#227460 = VERTEX_POINT('',#227461); +#227461 = CARTESIAN_POINT('',(152.34663,-58.239776,1.585)); +#227462 = LINE('',#227463,#227464); +#227463 = CARTESIAN_POINT('',(152.344597,-58.464285,1.585)); +#227464 = VECTOR('',#227465,1.); +#227465 = DIRECTION('',(9.054945028507E-03,0.999959003145,0.)); +#227466 = ORIENTED_EDGE('',*,*,#227467,.T.); +#227467 = EDGE_CURVE('',#227460,#227468,#227470,.T.); +#227468 = VERTEX_POINT('',#227469); +#227469 = CARTESIAN_POINT('',(152.398191,-58.087888,1.585)); +#227470 = LINE('',#227471,#227472); +#227471 = CARTESIAN_POINT('',(152.34663,-58.239776,1.585)); +#227472 = VECTOR('',#227473,1.); +#227473 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#227474 = ORIENTED_EDGE('',*,*,#227475,.T.); +#227475 = EDGE_CURVE('',#227468,#227383,#227476,.T.); +#227476 = LINE('',#227477,#227478); +#227477 = CARTESIAN_POINT('',(152.398191,-58.087888,1.585)); +#227478 = VECTOR('',#227479,1.); +#227479 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#227480 = FACE_BOUND('',#227481,.F.); +#227481 = EDGE_LOOP('',(#227482,#227493,#227501,#227509,#227517,#227525, + #227533,#227541,#227549)); +#227482 = ORIENTED_EDGE('',*,*,#227483,.T.); +#227483 = EDGE_CURVE('',#227484,#227486,#227488,.T.); +#227484 = VERTEX_POINT('',#227485); +#227485 = CARTESIAN_POINT('',(153.072622,-58.054184,1.585)); +#227486 = VERTEX_POINT('',#227487); +#227487 = CARTESIAN_POINT('',(152.576669,-58.089134,1.585)); +#227488 = CIRCLE('',#227489,0.559258743581); +#227489 = AXIS2_PLACEMENT_3D('',#227490,#227491,#227492); +#227490 = CARTESIAN_POINT('',(152.85986183298,-58.57139136035,1.585)); +#227491 = DIRECTION('',(0.,0.,1.)); +#227492 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#227493 = ORIENTED_EDGE('',*,*,#227494,.T.); +#227494 = EDGE_CURVE('',#227486,#227495,#227497,.T.); +#227495 = VERTEX_POINT('',#227496); +#227496 = CARTESIAN_POINT('',(152.509265,-58.15654,1.585)); +#227497 = LINE('',#227498,#227499); +#227498 = CARTESIAN_POINT('',(152.576669,-58.089134,1.585)); +#227499 = VECTOR('',#227500,1.); +#227500 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#227501 = ORIENTED_EDGE('',*,*,#227502,.T.); +#227502 = EDGE_CURVE('',#227495,#227503,#227505,.T.); +#227503 = VERTEX_POINT('',#227504); +#227504 = CARTESIAN_POINT('',(152.474597,-58.260546,1.585)); +#227505 = LINE('',#227506,#227507); +#227506 = CARTESIAN_POINT('',(152.509265,-58.15654,1.585)); +#227507 = VECTOR('',#227508,1.); +#227508 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#227509 = ORIENTED_EDGE('',*,*,#227510,.T.); +#227510 = EDGE_CURVE('',#227503,#227511,#227513,.T.); +#227511 = VERTEX_POINT('',#227512); +#227512 = CARTESIAN_POINT('',(152.474597,-58.399285,1.585)); +#227513 = LINE('',#227514,#227515); +#227514 = CARTESIAN_POINT('',(152.474597,-58.260546,1.585)); +#227515 = VECTOR('',#227516,1.); +#227516 = DIRECTION('',(0.,-1.,0.)); +#227517 = ORIENTED_EDGE('',*,*,#227518,.T.); +#227518 = EDGE_CURVE('',#227511,#227519,#227521,.T.); +#227519 = VERTEX_POINT('',#227520); +#227520 = CARTESIAN_POINT('',(153.244597,-58.399285,1.585)); +#227521 = LINE('',#227522,#227523); +#227522 = CARTESIAN_POINT('',(152.474597,-58.399285,1.585)); +#227523 = VECTOR('',#227524,1.); +#227524 = DIRECTION('',(1.,0.,0.)); +#227525 = ORIENTED_EDGE('',*,*,#227526,.T.); +#227526 = EDGE_CURVE('',#227519,#227527,#227529,.T.); +#227527 = VERTEX_POINT('',#227528); +#227528 = CARTESIAN_POINT('',(153.244597,-58.260546,1.585)); +#227529 = LINE('',#227530,#227531); +#227530 = CARTESIAN_POINT('',(153.244597,-58.399285,1.585)); +#227531 = VECTOR('',#227532,1.); +#227532 = DIRECTION('',(0.,1.,0.)); +#227533 = ORIENTED_EDGE('',*,*,#227534,.T.); +#227534 = EDGE_CURVE('',#227527,#227535,#227537,.T.); +#227535 = VERTEX_POINT('',#227536); +#227536 = CARTESIAN_POINT('',(153.209928,-58.15654,1.585)); +#227537 = LINE('',#227538,#227539); +#227538 = CARTESIAN_POINT('',(153.244597,-58.260546,1.585)); +#227539 = VECTOR('',#227540,1.); +#227540 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#227541 = ORIENTED_EDGE('',*,*,#227542,.T.); +#227542 = EDGE_CURVE('',#227535,#227543,#227545,.T.); +#227543 = VERTEX_POINT('',#227544); +#227544 = CARTESIAN_POINT('',(153.142522,-58.089134,1.585)); +#227545 = LINE('',#227546,#227547); +#227546 = CARTESIAN_POINT('',(153.209928,-58.15654,1.585)); +#227547 = VECTOR('',#227548,1.); +#227548 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#227549 = ORIENTED_EDGE('',*,*,#227550,.T.); +#227550 = EDGE_CURVE('',#227543,#227484,#227551,.T.); +#227551 = LINE('',#227552,#227553); +#227552 = CARTESIAN_POINT('',(153.142522,-58.089134,1.585)); +#227553 = VECTOR('',#227554,1.); +#227554 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#227555 = PLANE('',#227556); +#227556 = AXIS2_PLACEMENT_3D('',#227557,#227558,#227559); +#227557 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227558 = DIRECTION('',(0.,0.,1.)); +#227559 = DIRECTION('',(1.,0.,-0.)); +#227560 = SHELL_BASED_SURFACE_MODEL('',(#227561)); +#227561 = OPEN_SHELL('',(#227562)); +#227562 = ADVANCED_FACE('',(#227563),#227697,.T.); +#227563 = FACE_BOUND('',#227564,.F.); +#227564 = EDGE_LOOP('',(#227565,#227575,#227583,#227592,#227600,#227608, + #227617,#227625,#227634,#227642,#227650,#227658,#227666,#227675, + #227683,#227691)); +#227565 = ORIENTED_EDGE('',*,*,#227566,.T.); +#227566 = EDGE_CURVE('',#227567,#227569,#227571,.T.); +#227567 = VERTEX_POINT('',#227568); +#227568 = CARTESIAN_POINT('',(164.313562,-57.294941,1.585)); +#227569 = VERTEX_POINT('',#227570); +#227570 = CARTESIAN_POINT('',(164.352018,-57.27436,1.585)); +#227571 = LINE('',#227572,#227573); +#227572 = CARTESIAN_POINT('',(164.313562,-57.294941,1.585)); +#227573 = VECTOR('',#227574,1.); +#227574 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#227575 = ORIENTED_EDGE('',*,*,#227576,.T.); +#227576 = EDGE_CURVE('',#227569,#227577,#227579,.T.); +#227577 = VERTEX_POINT('',#227578); +#227578 = CARTESIAN_POINT('',(164.373855,-57.27436,1.585)); +#227579 = LINE('',#227580,#227581); +#227580 = CARTESIAN_POINT('',(164.352018,-57.27436,1.585)); +#227581 = VECTOR('',#227582,1.); +#227582 = DIRECTION('',(1.,0.,0.)); +#227583 = ORIENTED_EDGE('',*,*,#227584,.T.); +#227584 = EDGE_CURVE('',#227577,#227585,#227587,.T.); +#227585 = VERTEX_POINT('',#227586); +#227586 = CARTESIAN_POINT('',(164.44165,-57.347919,1.585)); +#227587 = CIRCLE('',#227588,7.216898094226E-02); +#227588 = AXIS2_PLACEMENT_3D('',#227589,#227590,#227591); +#227589 = CARTESIAN_POINT('',(164.36949706389,-57.34639728342,1.585)); +#227590 = DIRECTION('',(0.,0.,-1.)); +#227591 = DIRECTION('',(6.038516895227E-02,0.998175150648,0.)); +#227592 = ORIENTED_EDGE('',*,*,#227593,.T.); +#227593 = EDGE_CURVE('',#227585,#227594,#227596,.T.); +#227594 = VERTEX_POINT('',#227595); +#227595 = CARTESIAN_POINT('',(164.44165,-58.272919,1.585)); +#227596 = LINE('',#227597,#227598); +#227597 = CARTESIAN_POINT('',(164.44165,-57.347919,1.585)); +#227598 = VECTOR('',#227599,1.); +#227599 = DIRECTION('',(0.,-1.,0.)); +#227600 = ORIENTED_EDGE('',*,*,#227601,.T.); +#227601 = EDGE_CURVE('',#227594,#227602,#227604,.T.); +#227602 = VERTEX_POINT('',#227603); +#227603 = CARTESIAN_POINT('',(164.666996,-58.27436,1.585)); +#227604 = LINE('',#227605,#227606); +#227605 = CARTESIAN_POINT('',(164.44165,-58.272919,1.585)); +#227606 = VECTOR('',#227607,1.); +#227607 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#227608 = ORIENTED_EDGE('',*,*,#227609,.T.); +#227609 = EDGE_CURVE('',#227602,#227610,#227612,.T.); +#227610 = VERTEX_POINT('',#227611); +#227611 = CARTESIAN_POINT('',(164.652364,-58.422919,1.585)); +#227612 = CIRCLE('',#227613,7.500006711464E-02); +#227613 = AXIS2_PLACEMENT_3D('',#227614,#227615,#227616); +#227614 = CARTESIAN_POINT('',(164.65236406711,-58.34791893288,1.585)); +#227615 = DIRECTION('',(0.,0.,-1.)); +#227616 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227617 = ORIENTED_EDGE('',*,*,#227618,.T.); +#227618 = EDGE_CURVE('',#227610,#227619,#227621,.T.); +#227619 = VERTEX_POINT('',#227620); +#227620 = CARTESIAN_POINT('',(164.066304,-58.421478,1.585)); +#227621 = LINE('',#227622,#227623); +#227622 = CARTESIAN_POINT('',(164.652364,-58.422919,1.585)); +#227623 = VECTOR('',#227624,1.); +#227624 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#227625 = ORIENTED_EDGE('',*,*,#227626,.T.); +#227626 = EDGE_CURVE('',#227619,#227627,#227629,.T.); +#227627 = VERTEX_POINT('',#227628); +#227628 = CARTESIAN_POINT('',(164.080936,-58.272919,1.585)); +#227629 = CIRCLE('',#227630,7.500006711464E-02); +#227630 = AXIS2_PLACEMENT_3D('',#227631,#227632,#227633); +#227631 = CARTESIAN_POINT('',(164.08093593288,-58.34791906711,1.585)); +#227632 = DIRECTION('',(0.,0.,-1.)); +#227633 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#227634 = ORIENTED_EDGE('',*,*,#227635,.T.); +#227635 = EDGE_CURVE('',#227627,#227636,#227638,.T.); +#227636 = VERTEX_POINT('',#227637); +#227637 = CARTESIAN_POINT('',(164.29165,-58.272919,1.585)); +#227638 = LINE('',#227639,#227640); +#227639 = CARTESIAN_POINT('',(164.080936,-58.272919,1.585)); +#227640 = VECTOR('',#227641,1.); +#227641 = DIRECTION('',(1.,0.,0.)); +#227642 = ORIENTED_EDGE('',*,*,#227643,.T.); +#227643 = EDGE_CURVE('',#227636,#227644,#227646,.T.); +#227644 = VERTEX_POINT('',#227645); +#227645 = CARTESIAN_POINT('',(164.29165,-57.576604,1.585)); +#227646 = LINE('',#227647,#227648); +#227647 = CARTESIAN_POINT('',(164.29165,-58.272919,1.585)); +#227648 = VECTOR('',#227649,1.); +#227649 = DIRECTION('',(0.,1.,0.)); +#227650 = ORIENTED_EDGE('',*,*,#227651,.T.); +#227651 = EDGE_CURVE('',#227644,#227652,#227654,.T.); +#227652 = VERTEX_POINT('',#227653); +#227653 = CARTESIAN_POINT('',(164.216014,-57.649131,1.585)); +#227654 = LINE('',#227655,#227656); +#227655 = CARTESIAN_POINT('',(164.29165,-57.576604,1.585)); +#227656 = VECTOR('',#227657,1.); +#227657 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#227658 = ORIENTED_EDGE('',*,*,#227659,.T.); +#227659 = EDGE_CURVE('',#227652,#227660,#227662,.T.); +#227660 = VERTEX_POINT('',#227661); +#227661 = CARTESIAN_POINT('',(164.100745,-57.70597,1.585)); +#227662 = LINE('',#227663,#227664); +#227663 = CARTESIAN_POINT('',(164.216014,-57.649131,1.585)); +#227664 = VECTOR('',#227665,1.); +#227665 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#227666 = ORIENTED_EDGE('',*,*,#227667,.T.); +#227667 = EDGE_CURVE('',#227660,#227668,#227670,.T.); +#227668 = VERTEX_POINT('',#227669); +#227669 = CARTESIAN_POINT('',(164.047395,-57.566551,1.585)); +#227670 = CIRCLE('',#227671,7.500005272362E-02); +#227671 = AXIS2_PLACEMENT_3D('',#227672,#227673,#227674); +#227672 = CARTESIAN_POINT('',(164.08093555676,-57.63363332972,1.585)); +#227673 = DIRECTION('',(0.,0.,-1.)); +#227674 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#227675 = ORIENTED_EDGE('',*,*,#227676,.T.); +#227676 = EDGE_CURVE('',#227668,#227677,#227679,.T.); +#227677 = VERTEX_POINT('',#227678); +#227678 = CARTESIAN_POINT('',(164.131747,-57.524375,1.585)); +#227679 = LINE('',#227680,#227681); +#227680 = CARTESIAN_POINT('',(164.047395,-57.566551,1.585)); +#227681 = VECTOR('',#227682,1.); +#227682 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#227683 = ORIENTED_EDGE('',*,*,#227684,.T.); +#227684 = EDGE_CURVE('',#227677,#227685,#227687,.T.); +#227685 = VERTEX_POINT('',#227686); +#227686 = CARTESIAN_POINT('',(164.213126,-57.442996,1.585)); +#227687 = LINE('',#227688,#227689); +#227688 = CARTESIAN_POINT('',(164.131747,-57.524375,1.585)); +#227689 = VECTOR('',#227690,1.); +#227690 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#227691 = ORIENTED_EDGE('',*,*,#227692,.T.); +#227692 = EDGE_CURVE('',#227685,#227567,#227693,.T.); +#227693 = LINE('',#227694,#227695); +#227694 = CARTESIAN_POINT('',(164.213126,-57.442996,1.585)); +#227695 = VECTOR('',#227696,1.); +#227696 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#227697 = PLANE('',#227698); +#227698 = AXIS2_PLACEMENT_3D('',#227699,#227700,#227701); +#227699 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227700 = DIRECTION('',(0.,0.,1.)); +#227701 = DIRECTION('',(1.,0.,-0.)); +#227702 = SHELL_BASED_SURFACE_MODEL('',(#227703)); +#227703 = OPEN_SHELL('',(#227704)); +#227704 = ADVANCED_FACE('',(#227705),#227864,.T.); +#227705 = FACE_BOUND('',#227706,.F.); +#227706 = EDGE_LOOP('',(#227707,#227718,#227726,#227734,#227742,#227750, + #227758,#227766,#227775,#227783,#227792,#227800,#227808,#227816, + #227825,#227833,#227841,#227849,#227858)); +#227707 = ORIENTED_EDGE('',*,*,#227708,.T.); +#227708 = EDGE_CURVE('',#227709,#227711,#227713,.T.); +#227709 = VERTEX_POINT('',#227710); +#227710 = CARTESIAN_POINT('',(167.595014,-57.328456,1.585)); +#227711 = VERTEX_POINT('',#227712); +#227712 = CARTESIAN_POINT('',(168.104409,-57.337786,1.585)); +#227713 = CIRCLE('',#227714,0.450326844012); +#227714 = AXIS2_PLACEMENT_3D('',#227715,#227716,#227717); +#227715 = CARTESIAN_POINT('',(167.8429110301,-57.70440989199,1.585)); +#227716 = DIRECTION('',(0.,0.,-1.)); +#227717 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#227718 = ORIENTED_EDGE('',*,*,#227719,.T.); +#227719 = EDGE_CURVE('',#227711,#227720,#227722,.T.); +#227720 = VERTEX_POINT('',#227721); +#227721 = CARTESIAN_POINT('',(168.167862,-57.403316,1.585)); +#227722 = LINE('',#227723,#227724); +#227723 = CARTESIAN_POINT('',(168.104409,-57.337786,1.585)); +#227724 = VECTOR('',#227725,1.); +#227725 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#227726 = ORIENTED_EDGE('',*,*,#227727,.T.); +#227727 = EDGE_CURVE('',#227720,#227728,#227730,.T.); +#227728 = VERTEX_POINT('',#227729); +#227729 = CARTESIAN_POINT('',(168.225923,-57.523763,1.585)); +#227730 = LINE('',#227731,#227732); +#227731 = CARTESIAN_POINT('',(168.167862,-57.403316,1.585)); +#227732 = VECTOR('',#227733,1.); +#227733 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#227734 = ORIENTED_EDGE('',*,*,#227735,.T.); +#227735 = EDGE_CURVE('',#227728,#227736,#227738,.T.); +#227736 = VERTEX_POINT('',#227737); +#227737 = CARTESIAN_POINT('',(168.225164,-57.650095,1.585)); +#227738 = LINE('',#227739,#227740); +#227739 = CARTESIAN_POINT('',(168.225923,-57.523763,1.585)); +#227740 = VECTOR('',#227741,1.); +#227741 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#227742 = ORIENTED_EDGE('',*,*,#227743,.T.); +#227743 = EDGE_CURVE('',#227736,#227744,#227746,.T.); +#227744 = VERTEX_POINT('',#227745); +#227745 = CARTESIAN_POINT('',(168.167106,-57.818158,1.585)); +#227746 = LINE('',#227747,#227748); +#227747 = CARTESIAN_POINT('',(168.225164,-57.650095,1.585)); +#227748 = VECTOR('',#227749,1.); +#227749 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#227750 = ORIENTED_EDGE('',*,*,#227751,.T.); +#227751 = EDGE_CURVE('',#227744,#227752,#227754,.T.); +#227752 = VERTEX_POINT('',#227753); +#227753 = CARTESIAN_POINT('',(167.714383,-58.272919,1.585)); +#227754 = LINE('',#227755,#227756); +#227755 = CARTESIAN_POINT('',(168.167106,-57.818158,1.585)); +#227756 = VECTOR('',#227757,1.); +#227757 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#227758 = ORIENTED_EDGE('',*,*,#227759,.T.); +#227759 = EDGE_CURVE('',#227752,#227760,#227762,.T.); +#227760 = VERTEX_POINT('',#227761); +#227761 = CARTESIAN_POINT('',(168.166996,-58.27436,1.585)); +#227762 = LINE('',#227763,#227764); +#227763 = CARTESIAN_POINT('',(167.714383,-58.272919,1.585)); +#227764 = VECTOR('',#227765,1.); +#227765 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#227766 = ORIENTED_EDGE('',*,*,#227767,.T.); +#227767 = EDGE_CURVE('',#227760,#227768,#227770,.T.); +#227768 = VERTEX_POINT('',#227769); +#227769 = CARTESIAN_POINT('',(168.152364,-58.422919,1.585)); +#227770 = CIRCLE('',#227771,7.500006711464E-02); +#227771 = AXIS2_PLACEMENT_3D('',#227772,#227773,#227774); +#227772 = CARTESIAN_POINT('',(168.15236406711,-58.34791893288,1.585)); +#227773 = DIRECTION('',(0.,0.,-1.)); +#227774 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227775 = ORIENTED_EDGE('',*,*,#227776,.T.); +#227776 = EDGE_CURVE('',#227768,#227777,#227779,.T.); +#227777 = VERTEX_POINT('',#227778); +#227778 = CARTESIAN_POINT('',(167.518685,-58.421478,1.585)); +#227779 = LINE('',#227780,#227781); +#227780 = CARTESIAN_POINT('',(168.152364,-58.422919,1.585)); +#227781 = VECTOR('',#227782,1.); +#227782 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#227783 = ORIENTED_EDGE('',*,*,#227784,.T.); +#227784 = EDGE_CURVE('',#227777,#227785,#227787,.T.); +#227785 = VERTEX_POINT('',#227786); +#227786 = CARTESIAN_POINT('',(167.480284,-58.294886,1.585)); +#227787 = CIRCLE('',#227788,7.500021013109E-02); +#227788 = AXIS2_PLACEMENT_3D('',#227789,#227790,#227791); +#227789 = CARTESIAN_POINT('',(167.5333173167,-58.34791899764,1.585)); +#227790 = DIRECTION('',(0.,0.,-1.)); +#227791 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#227792 = ORIENTED_EDGE('',*,*,#227793,.T.); +#227793 = EDGE_CURVE('',#227785,#227794,#227796,.T.); +#227794 = VERTEX_POINT('',#227795); +#227795 = CARTESIAN_POINT('',(168.039192,-57.735976,1.585)); +#227796 = LINE('',#227797,#227798); +#227797 = CARTESIAN_POINT('',(167.480284,-58.294886,1.585)); +#227798 = VECTOR('',#227799,1.); +#227799 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#227800 = ORIENTED_EDGE('',*,*,#227801,.T.); +#227801 = EDGE_CURVE('',#227794,#227802,#227804,.T.); +#227802 = VERTEX_POINT('',#227803); +#227803 = CARTESIAN_POINT('',(168.077364,-57.621463,1.585)); +#227804 = LINE('',#227805,#227806); +#227805 = CARTESIAN_POINT('',(168.039192,-57.735976,1.585)); +#227806 = VECTOR('',#227807,1.); +#227807 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#227808 = ORIENTED_EDGE('',*,*,#227809,.T.); +#227809 = EDGE_CURVE('',#227802,#227810,#227812,.T.); +#227810 = VERTEX_POINT('',#227811); +#227811 = CARTESIAN_POINT('',(168.077364,-57.5561,1.585)); +#227812 = LINE('',#227813,#227814); +#227813 = CARTESIAN_POINT('',(168.077364,-57.621463,1.585)); +#227814 = VECTOR('',#227815,1.); +#227815 = DIRECTION('',(0.,1.,0.)); +#227816 = ORIENTED_EDGE('',*,*,#227817,.T.); +#227817 = EDGE_CURVE('',#227810,#227818,#227820,.T.); +#227818 = VERTEX_POINT('',#227819); +#227819 = CARTESIAN_POINT('',(167.944183,-57.422919,1.585)); +#227820 = CIRCLE('',#227821,0.18686440374); +#227821 = AXIS2_PLACEMENT_3D('',#227822,#227823,#227824); +#227822 = CARTESIAN_POINT('',(167.896647,-57.603636,1.585)); +#227823 = DIRECTION('',(0.,0.,1.)); +#227824 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#227825 = ORIENTED_EDGE('',*,*,#227826,.T.); +#227826 = EDGE_CURVE('',#227818,#227827,#227829,.T.); +#227827 = VERTEX_POINT('',#227828); +#227828 = CARTESIAN_POINT('',(167.741498,-57.422919,1.585)); +#227829 = LINE('',#227830,#227831); +#227830 = CARTESIAN_POINT('',(167.944183,-57.422919,1.585)); +#227831 = VECTOR('',#227832,1.); +#227832 = DIRECTION('',(-1.,0.,0.)); +#227833 = ORIENTED_EDGE('',*,*,#227834,.T.); +#227834 = EDGE_CURVE('',#227827,#227835,#227837,.T.); +#227835 = VERTEX_POINT('',#227836); +#227836 = CARTESIAN_POINT('',(167.672982,-57.457177,1.585)); +#227837 = LINE('',#227838,#227839); +#227838 = CARTESIAN_POINT('',(167.741498,-57.422919,1.585)); +#227839 = VECTOR('',#227840,1.); +#227840 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#227841 = ORIENTED_EDGE('',*,*,#227842,.T.); +#227842 = EDGE_CURVE('',#227835,#227843,#227845,.T.); +#227843 = VERTEX_POINT('',#227844); +#227844 = CARTESIAN_POINT('',(167.622604,-57.505517,1.585)); +#227845 = LINE('',#227846,#227847); +#227846 = CARTESIAN_POINT('',(167.672982,-57.457177,1.585)); +#227847 = VECTOR('',#227848,1.); +#227848 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#227849 = ORIENTED_EDGE('',*,*,#227850,.T.); +#227850 = EDGE_CURVE('',#227843,#227851,#227853,.T.); +#227851 = VERTEX_POINT('',#227852); +#227852 = CARTESIAN_POINT('',(167.527903,-57.390124,1.585)); +#227853 = CIRCLE('',#227854,7.499996838527E-02); +#227854 = AXIS2_PLACEMENT_3D('',#227855,#227856,#227857); +#227855 = CARTESIAN_POINT('',(167.580936,-57.44315697246,1.585)); +#227856 = DIRECTION('',(0.,0.,-1.)); +#227857 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#227858 = ORIENTED_EDGE('',*,*,#227859,.T.); +#227859 = EDGE_CURVE('',#227851,#227709,#227860,.T.); +#227860 = LINE('',#227861,#227862); +#227861 = CARTESIAN_POINT('',(167.527903,-57.390124,1.585)); +#227862 = VECTOR('',#227863,1.); +#227863 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#227864 = PLANE('',#227865); +#227865 = AXIS2_PLACEMENT_3D('',#227866,#227867,#227868); +#227866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227867 = DIRECTION('',(0.,0.,1.)); +#227868 = DIRECTION('',(1.,0.,-0.)); +#227869 = SHELL_BASED_SURFACE_MODEL('',(#227870)); +#227870 = OPEN_SHELL('',(#227871)); +#227871 = ADVANCED_FACE('',(#227872),#228006,.T.); +#227872 = FACE_BOUND('',#227873,.F.); +#227873 = EDGE_LOOP('',(#227874,#227884,#227892,#227901,#227909,#227917, + #227926,#227934,#227943,#227951,#227959,#227967,#227975,#227984, + #227992,#228000)); +#227874 = ORIENTED_EDGE('',*,*,#227875,.T.); +#227875 = EDGE_CURVE('',#227876,#227878,#227880,.T.); +#227876 = VERTEX_POINT('',#227877); +#227877 = CARTESIAN_POINT('',(175.519514,-57.294941,1.585)); +#227878 = VERTEX_POINT('',#227879); +#227879 = CARTESIAN_POINT('',(175.55797,-57.27436,1.585)); +#227880 = LINE('',#227881,#227882); +#227881 = CARTESIAN_POINT('',(175.519514,-57.294941,1.585)); +#227882 = VECTOR('',#227883,1.); +#227883 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#227884 = ORIENTED_EDGE('',*,*,#227885,.T.); +#227885 = EDGE_CURVE('',#227878,#227886,#227888,.T.); +#227886 = VERTEX_POINT('',#227887); +#227887 = CARTESIAN_POINT('',(175.579807,-57.27436,1.585)); +#227888 = LINE('',#227889,#227890); +#227889 = CARTESIAN_POINT('',(175.55797,-57.27436,1.585)); +#227890 = VECTOR('',#227891,1.); +#227891 = DIRECTION('',(1.,0.,0.)); +#227892 = ORIENTED_EDGE('',*,*,#227893,.T.); +#227893 = EDGE_CURVE('',#227886,#227894,#227896,.T.); +#227894 = VERTEX_POINT('',#227895); +#227895 = CARTESIAN_POINT('',(175.647602,-57.347919,1.585)); +#227896 = CIRCLE('',#227897,7.216898094227E-02); +#227897 = AXIS2_PLACEMENT_3D('',#227898,#227899,#227900); +#227898 = CARTESIAN_POINT('',(175.57544906389,-57.34639728342,1.585)); +#227899 = DIRECTION('',(0.,0.,-1.)); +#227900 = DIRECTION('',(6.038516895226E-02,0.998175150648,0.)); +#227901 = ORIENTED_EDGE('',*,*,#227902,.T.); +#227902 = EDGE_CURVE('',#227894,#227903,#227905,.T.); +#227903 = VERTEX_POINT('',#227904); +#227904 = CARTESIAN_POINT('',(175.647602,-58.272919,1.585)); +#227905 = LINE('',#227906,#227907); +#227906 = CARTESIAN_POINT('',(175.647602,-57.347919,1.585)); +#227907 = VECTOR('',#227908,1.); +#227908 = DIRECTION('',(0.,-1.,0.)); +#227909 = ORIENTED_EDGE('',*,*,#227910,.T.); +#227910 = EDGE_CURVE('',#227903,#227911,#227913,.T.); +#227911 = VERTEX_POINT('',#227912); +#227912 = CARTESIAN_POINT('',(175.872948,-58.27436,1.585)); +#227913 = LINE('',#227914,#227915); +#227914 = CARTESIAN_POINT('',(175.647602,-58.272919,1.585)); +#227915 = VECTOR('',#227916,1.); +#227916 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#227917 = ORIENTED_EDGE('',*,*,#227918,.T.); +#227918 = EDGE_CURVE('',#227911,#227919,#227921,.T.); +#227919 = VERTEX_POINT('',#227920); +#227920 = CARTESIAN_POINT('',(175.858316,-58.422919,1.585)); +#227921 = CIRCLE('',#227922,7.500006711464E-02); +#227922 = AXIS2_PLACEMENT_3D('',#227923,#227924,#227925); +#227923 = CARTESIAN_POINT('',(175.85831606711,-58.34791893288,1.585)); +#227924 = DIRECTION('',(0.,0.,-1.)); +#227925 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227926 = ORIENTED_EDGE('',*,*,#227927,.T.); +#227927 = EDGE_CURVE('',#227919,#227928,#227930,.T.); +#227928 = VERTEX_POINT('',#227929); +#227929 = CARTESIAN_POINT('',(175.272256,-58.421478,1.585)); +#227930 = LINE('',#227931,#227932); +#227931 = CARTESIAN_POINT('',(175.858316,-58.422919,1.585)); +#227932 = VECTOR('',#227933,1.); +#227933 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#227934 = ORIENTED_EDGE('',*,*,#227935,.T.); +#227935 = EDGE_CURVE('',#227928,#227936,#227938,.T.); +#227936 = VERTEX_POINT('',#227937); +#227937 = CARTESIAN_POINT('',(175.286888,-58.272919,1.585)); +#227938 = CIRCLE('',#227939,7.500006711465E-02); +#227939 = AXIS2_PLACEMENT_3D('',#227940,#227941,#227942); +#227940 = CARTESIAN_POINT('',(175.28688793288,-58.34791906711,1.585)); +#227941 = DIRECTION('',(0.,0.,-1.)); +#227942 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#227943 = ORIENTED_EDGE('',*,*,#227944,.T.); +#227944 = EDGE_CURVE('',#227936,#227945,#227947,.T.); +#227945 = VERTEX_POINT('',#227946); +#227946 = CARTESIAN_POINT('',(175.497602,-58.272919,1.585)); +#227947 = LINE('',#227948,#227949); +#227948 = CARTESIAN_POINT('',(175.286888,-58.272919,1.585)); +#227949 = VECTOR('',#227950,1.); +#227950 = DIRECTION('',(1.,0.,0.)); +#227951 = ORIENTED_EDGE('',*,*,#227952,.T.); +#227952 = EDGE_CURVE('',#227945,#227953,#227955,.T.); +#227953 = VERTEX_POINT('',#227954); +#227954 = CARTESIAN_POINT('',(175.497602,-57.576604,1.585)); +#227955 = LINE('',#227956,#227957); +#227956 = CARTESIAN_POINT('',(175.497602,-58.272919,1.585)); +#227957 = VECTOR('',#227958,1.); +#227958 = DIRECTION('',(0.,1.,0.)); +#227959 = ORIENTED_EDGE('',*,*,#227960,.T.); +#227960 = EDGE_CURVE('',#227953,#227961,#227963,.T.); +#227961 = VERTEX_POINT('',#227962); +#227962 = CARTESIAN_POINT('',(175.421966,-57.649131,1.585)); +#227963 = LINE('',#227964,#227965); +#227964 = CARTESIAN_POINT('',(175.497602,-57.576604,1.585)); +#227965 = VECTOR('',#227966,1.); +#227966 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#227967 = ORIENTED_EDGE('',*,*,#227968,.T.); +#227968 = EDGE_CURVE('',#227961,#227969,#227971,.T.); +#227969 = VERTEX_POINT('',#227970); +#227970 = CARTESIAN_POINT('',(175.306697,-57.70597,1.585)); +#227971 = LINE('',#227972,#227973); +#227972 = CARTESIAN_POINT('',(175.421966,-57.649131,1.585)); +#227973 = VECTOR('',#227974,1.); +#227974 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#227975 = ORIENTED_EDGE('',*,*,#227976,.T.); +#227976 = EDGE_CURVE('',#227969,#227977,#227979,.T.); +#227977 = VERTEX_POINT('',#227978); +#227978 = CARTESIAN_POINT('',(175.253347,-57.566551,1.585)); +#227979 = CIRCLE('',#227980,7.500005272363E-02); +#227980 = AXIS2_PLACEMENT_3D('',#227981,#227982,#227983); +#227981 = CARTESIAN_POINT('',(175.28688755676,-57.63363332972,1.585)); +#227982 = DIRECTION('',(0.,0.,-1.)); +#227983 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#227984 = ORIENTED_EDGE('',*,*,#227985,.T.); +#227985 = EDGE_CURVE('',#227977,#227986,#227988,.T.); +#227986 = VERTEX_POINT('',#227987); +#227987 = CARTESIAN_POINT('',(175.337699,-57.524375,1.585)); +#227988 = LINE('',#227989,#227990); +#227989 = CARTESIAN_POINT('',(175.253347,-57.566551,1.585)); +#227990 = VECTOR('',#227991,1.); +#227991 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#227992 = ORIENTED_EDGE('',*,*,#227993,.T.); +#227993 = EDGE_CURVE('',#227986,#227994,#227996,.T.); +#227994 = VERTEX_POINT('',#227995); +#227995 = CARTESIAN_POINT('',(175.419078,-57.442996,1.585)); +#227996 = LINE('',#227997,#227998); +#227997 = CARTESIAN_POINT('',(175.337699,-57.524375,1.585)); +#227998 = VECTOR('',#227999,1.); +#227999 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#228000 = ORIENTED_EDGE('',*,*,#228001,.T.); +#228001 = EDGE_CURVE('',#227994,#227876,#228002,.T.); +#228002 = LINE('',#228003,#228004); +#228003 = CARTESIAN_POINT('',(175.419078,-57.442996,1.585)); +#228004 = VECTOR('',#228005,1.); +#228005 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#228006 = PLANE('',#228007); +#228007 = AXIS2_PLACEMENT_3D('',#228008,#228009,#228010); +#228008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228009 = DIRECTION('',(0.,0.,1.)); +#228010 = DIRECTION('',(1.,0.,-0.)); +#228011 = SHELL_BASED_SURFACE_MODEL('',(#228012)); +#228012 = OPEN_SHELL('',(#228013)); +#228013 = ADVANCED_FACE('',(#228014),#228173,.T.); +#228014 = FACE_BOUND('',#228015,.F.); +#228015 = EDGE_LOOP('',(#228016,#228027,#228035,#228043,#228051,#228059, + #228067,#228075,#228084,#228092,#228101,#228109,#228117,#228125, + #228134,#228142,#228150,#228158,#228167)); +#228016 = ORIENTED_EDGE('',*,*,#228017,.T.); +#228017 = EDGE_CURVE('',#228018,#228020,#228022,.T.); +#228018 = VERTEX_POINT('',#228019); +#228019 = CARTESIAN_POINT('',(179.300966,-57.328456,1.585)); +#228020 = VERTEX_POINT('',#228021); +#228021 = CARTESIAN_POINT('',(179.810361,-57.337786,1.585)); +#228022 = CIRCLE('',#228023,0.450326844012); +#228023 = AXIS2_PLACEMENT_3D('',#228024,#228025,#228026); +#228024 = CARTESIAN_POINT('',(179.5488630301,-57.70440989199,1.585)); +#228025 = DIRECTION('',(0.,0.,-1.)); +#228026 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#228027 = ORIENTED_EDGE('',*,*,#228028,.T.); +#228028 = EDGE_CURVE('',#228020,#228029,#228031,.T.); +#228029 = VERTEX_POINT('',#228030); +#228030 = CARTESIAN_POINT('',(179.873814,-57.403316,1.585)); +#228031 = LINE('',#228032,#228033); +#228032 = CARTESIAN_POINT('',(179.810361,-57.337786,1.585)); +#228033 = VECTOR('',#228034,1.); +#228034 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#228035 = ORIENTED_EDGE('',*,*,#228036,.T.); +#228036 = EDGE_CURVE('',#228029,#228037,#228039,.T.); +#228037 = VERTEX_POINT('',#228038); +#228038 = CARTESIAN_POINT('',(179.931875,-57.523763,1.585)); +#228039 = LINE('',#228040,#228041); +#228040 = CARTESIAN_POINT('',(179.873814,-57.403316,1.585)); +#228041 = VECTOR('',#228042,1.); +#228042 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#228043 = ORIENTED_EDGE('',*,*,#228044,.T.); +#228044 = EDGE_CURVE('',#228037,#228045,#228047,.T.); +#228045 = VERTEX_POINT('',#228046); +#228046 = CARTESIAN_POINT('',(179.931116,-57.650095,1.585)); +#228047 = LINE('',#228048,#228049); +#228048 = CARTESIAN_POINT('',(179.931875,-57.523763,1.585)); +#228049 = VECTOR('',#228050,1.); +#228050 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#228051 = ORIENTED_EDGE('',*,*,#228052,.T.); +#228052 = EDGE_CURVE('',#228045,#228053,#228055,.T.); +#228053 = VERTEX_POINT('',#228054); +#228054 = CARTESIAN_POINT('',(179.873058,-57.818158,1.585)); +#228055 = LINE('',#228056,#228057); +#228056 = CARTESIAN_POINT('',(179.931116,-57.650095,1.585)); +#228057 = VECTOR('',#228058,1.); +#228058 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#228059 = ORIENTED_EDGE('',*,*,#228060,.T.); +#228060 = EDGE_CURVE('',#228053,#228061,#228063,.T.); +#228061 = VERTEX_POINT('',#228062); +#228062 = CARTESIAN_POINT('',(179.420335,-58.272919,1.585)); +#228063 = LINE('',#228064,#228065); +#228064 = CARTESIAN_POINT('',(179.873058,-57.818158,1.585)); +#228065 = VECTOR('',#228066,1.); +#228066 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#228067 = ORIENTED_EDGE('',*,*,#228068,.T.); +#228068 = EDGE_CURVE('',#228061,#228069,#228071,.T.); +#228069 = VERTEX_POINT('',#228070); +#228070 = CARTESIAN_POINT('',(179.872948,-58.27436,1.585)); +#228071 = LINE('',#228072,#228073); +#228072 = CARTESIAN_POINT('',(179.420335,-58.272919,1.585)); +#228073 = VECTOR('',#228074,1.); +#228074 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#228075 = ORIENTED_EDGE('',*,*,#228076,.T.); +#228076 = EDGE_CURVE('',#228069,#228077,#228079,.T.); +#228077 = VERTEX_POINT('',#228078); +#228078 = CARTESIAN_POINT('',(179.858316,-58.422919,1.585)); +#228079 = CIRCLE('',#228080,7.500006711464E-02); +#228080 = AXIS2_PLACEMENT_3D('',#228081,#228082,#228083); +#228081 = CARTESIAN_POINT('',(179.85831606711,-58.34791893288,1.585)); +#228082 = DIRECTION('',(0.,0.,-1.)); +#228083 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#228084 = ORIENTED_EDGE('',*,*,#228085,.T.); +#228085 = EDGE_CURVE('',#228077,#228086,#228088,.T.); +#228086 = VERTEX_POINT('',#228087); +#228087 = CARTESIAN_POINT('',(179.224637,-58.421478,1.585)); +#228088 = LINE('',#228089,#228090); +#228089 = CARTESIAN_POINT('',(179.858316,-58.422919,1.585)); +#228090 = VECTOR('',#228091,1.); +#228091 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#228092 = ORIENTED_EDGE('',*,*,#228093,.T.); +#228093 = EDGE_CURVE('',#228086,#228094,#228096,.T.); +#228094 = VERTEX_POINT('',#228095); +#228095 = CARTESIAN_POINT('',(179.186236,-58.294886,1.585)); +#228096 = CIRCLE('',#228097,7.500021013109E-02); +#228097 = AXIS2_PLACEMENT_3D('',#228098,#228099,#228100); +#228098 = CARTESIAN_POINT('',(179.2392693167,-58.34791899764,1.585)); +#228099 = DIRECTION('',(0.,0.,-1.)); +#228100 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#228101 = ORIENTED_EDGE('',*,*,#228102,.T.); +#228102 = EDGE_CURVE('',#228094,#228103,#228105,.T.); +#228103 = VERTEX_POINT('',#228104); +#228104 = CARTESIAN_POINT('',(179.745144,-57.735976,1.585)); +#228105 = LINE('',#228106,#228107); +#228106 = CARTESIAN_POINT('',(179.186236,-58.294886,1.585)); +#228107 = VECTOR('',#228108,1.); +#228108 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#228109 = ORIENTED_EDGE('',*,*,#228110,.T.); +#228110 = EDGE_CURVE('',#228103,#228111,#228113,.T.); +#228111 = VERTEX_POINT('',#228112); +#228112 = CARTESIAN_POINT('',(179.783316,-57.621463,1.585)); +#228113 = LINE('',#228114,#228115); +#228114 = CARTESIAN_POINT('',(179.745144,-57.735976,1.585)); +#228115 = VECTOR('',#228116,1.); +#228116 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#228117 = ORIENTED_EDGE('',*,*,#228118,.T.); +#228118 = EDGE_CURVE('',#228111,#228119,#228121,.T.); +#228119 = VERTEX_POINT('',#228120); +#228120 = CARTESIAN_POINT('',(179.783316,-57.5561,1.585)); +#228121 = LINE('',#228122,#228123); +#228122 = CARTESIAN_POINT('',(179.783316,-57.621463,1.585)); +#228123 = VECTOR('',#228124,1.); +#228124 = DIRECTION('',(0.,1.,0.)); +#228125 = ORIENTED_EDGE('',*,*,#228126,.T.); +#228126 = EDGE_CURVE('',#228119,#228127,#228129,.T.); +#228127 = VERTEX_POINT('',#228128); +#228128 = CARTESIAN_POINT('',(179.650135,-57.422919,1.585)); +#228129 = CIRCLE('',#228130,0.18686440374); +#228130 = AXIS2_PLACEMENT_3D('',#228131,#228132,#228133); +#228131 = CARTESIAN_POINT('',(179.602599,-57.603636,1.585)); +#228132 = DIRECTION('',(0.,0.,1.)); +#228133 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#228134 = ORIENTED_EDGE('',*,*,#228135,.T.); +#228135 = EDGE_CURVE('',#228127,#228136,#228138,.T.); +#228136 = VERTEX_POINT('',#228137); +#228137 = CARTESIAN_POINT('',(179.44745,-57.422919,1.585)); +#228138 = LINE('',#228139,#228140); +#228139 = CARTESIAN_POINT('',(179.650135,-57.422919,1.585)); +#228140 = VECTOR('',#228141,1.); +#228141 = DIRECTION('',(-1.,0.,0.)); +#228142 = ORIENTED_EDGE('',*,*,#228143,.T.); +#228143 = EDGE_CURVE('',#228136,#228144,#228146,.T.); +#228144 = VERTEX_POINT('',#228145); +#228145 = CARTESIAN_POINT('',(179.378934,-57.457177,1.585)); +#228146 = LINE('',#228147,#228148); +#228147 = CARTESIAN_POINT('',(179.44745,-57.422919,1.585)); +#228148 = VECTOR('',#228149,1.); +#228149 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#228150 = ORIENTED_EDGE('',*,*,#228151,.T.); +#228151 = EDGE_CURVE('',#228144,#228152,#228154,.T.); +#228152 = VERTEX_POINT('',#228153); +#228153 = CARTESIAN_POINT('',(179.328556,-57.505517,1.585)); +#228154 = LINE('',#228155,#228156); +#228155 = CARTESIAN_POINT('',(179.378934,-57.457177,1.585)); +#228156 = VECTOR('',#228157,1.); +#228157 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#228158 = ORIENTED_EDGE('',*,*,#228159,.T.); +#228159 = EDGE_CURVE('',#228152,#228160,#228162,.T.); +#228160 = VERTEX_POINT('',#228161); +#228161 = CARTESIAN_POINT('',(179.233855,-57.390124,1.585)); +#228162 = CIRCLE('',#228163,7.499996838526E-02); +#228163 = AXIS2_PLACEMENT_3D('',#228164,#228165,#228166); +#228164 = CARTESIAN_POINT('',(179.286888,-57.44315697246,1.585)); +#228165 = DIRECTION('',(0.,0.,-1.)); +#228166 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#228167 = ORIENTED_EDGE('',*,*,#228168,.T.); +#228168 = EDGE_CURVE('',#228160,#228018,#228169,.T.); +#228169 = LINE('',#228170,#228171); +#228170 = CARTESIAN_POINT('',(179.233855,-57.390124,1.585)); +#228171 = VECTOR('',#228172,1.); +#228172 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#228173 = PLANE('',#228174); +#228174 = AXIS2_PLACEMENT_3D('',#228175,#228176,#228177); +#228175 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228176 = DIRECTION('',(0.,0.,1.)); +#228177 = DIRECTION('',(1.,0.,-0.)); +#228178 = SHELL_BASED_SURFACE_MODEL('',(#228179)); +#228179 = OPEN_SHELL('',(#228180)); +#228180 = ADVANCED_FACE('',(#228181,#228292),#228344,.T.); +#228181 = FACE_BOUND('',#228182,.F.); +#228182 = EDGE_LOOP('',(#228183,#228194,#228202,#228211,#228219,#228228, + #228236,#228244,#228253,#228261,#228269,#228277,#228286)); +#228183 = ORIENTED_EDGE('',*,*,#228184,.T.); +#228184 = EDGE_CURVE('',#228185,#228187,#228189,.T.); +#228185 = VERTEX_POINT('',#228186); +#228186 = CARTESIAN_POINT('',(163.054996,-57.333287,1.585)); +#228187 = VERTEX_POINT('',#228188); +#228188 = CARTESIAN_POINT('',(163.128555,-57.272919,1.585)); +#228189 = CIRCLE('',#228190,7.500074938989E-02); +#228190 = AXIS2_PLACEMENT_3D('',#228191,#228192,#228193); +#228191 = CARTESIAN_POINT('',(163.12855546611,-57.34791974938,1.585)); +#228192 = DIRECTION('',(0.,0.,-1.)); +#228193 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228194 = ORIENTED_EDGE('',*,*,#228195,.T.); +#228195 = EDGE_CURVE('',#228187,#228196,#228198,.T.); +#228196 = VERTEX_POINT('',#228197); +#228197 = CARTESIAN_POINT('',(163.524139,-57.27436,1.585)); +#228198 = LINE('',#228199,#228200); +#228199 = CARTESIAN_POINT('',(163.128555,-57.272919,1.585)); +#228200 = VECTOR('',#228201,1.); +#228201 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#228202 = ORIENTED_EDGE('',*,*,#228203,.T.); +#228203 = EDGE_CURVE('',#228196,#228204,#228206,.T.); +#228204 = VERTEX_POINT('',#228205); +#228205 = CARTESIAN_POINT('',(163.773542,-57.523763,1.585)); +#228206 = CIRCLE('',#228207,0.347870264855); +#228207 = AXIS2_PLACEMENT_3D('',#228208,#228209,#228210); +#228208 = CARTESIAN_POINT('',(163.43681126502,-57.61109073497,1.585)); +#228209 = DIRECTION('',(0.,0.,-1.)); +#228210 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228211 = ORIENTED_EDGE('',*,*,#228212,.T.); +#228212 = EDGE_CURVE('',#228204,#228213,#228215,.T.); +#228213 = VERTEX_POINT('',#228214); +#228214 = CARTESIAN_POINT('',(163.77232,-57.701062,1.585)); +#228215 = LINE('',#228216,#228217); +#228216 = CARTESIAN_POINT('',(163.773542,-57.523763,1.585)); +#228217 = VECTOR('',#228218,1.); +#228218 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#228219 = ORIENTED_EDGE('',*,*,#228220,.T.); +#228220 = EDGE_CURVE('',#228213,#228221,#228223,.T.); +#228221 = VERTEX_POINT('',#228222); +#228222 = CARTESIAN_POINT('',(163.524139,-57.945287,1.585)); +#228223 = CIRCLE('',#228224,0.348632345849); +#228224 = AXIS2_PLACEMENT_3D('',#228225,#228226,#228227); +#228225 = CARTESIAN_POINT('',(163.43637019403,-57.6078834593,1.585)); +#228226 = DIRECTION('',(0.,0.,-1.)); +#228227 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228228 = ORIENTED_EDGE('',*,*,#228229,.T.); +#228229 = EDGE_CURVE('',#228221,#228230,#228232,.T.); +#228230 = VERTEX_POINT('',#228231); +#228231 = CARTESIAN_POINT('',(163.510622,-57.946618,1.585)); +#228232 = LINE('',#228233,#228234); +#228233 = CARTESIAN_POINT('',(163.524139,-57.945287,1.585)); +#228234 = VECTOR('',#228235,1.); +#228235 = DIRECTION('',(-0.995186940545,-9.799465989996E-02,0.)); +#228236 = ORIENTED_EDGE('',*,*,#228237,.T.); +#228237 = EDGE_CURVE('',#228230,#228238,#228240,.T.); +#228238 = VERTEX_POINT('',#228239); +#228239 = CARTESIAN_POINT('',(163.768636,-58.317723,1.585)); +#228240 = LINE('',#228241,#228242); +#228241 = CARTESIAN_POINT('',(163.510622,-57.946618,1.585)); +#228242 = VECTOR('',#228243,1.); +#228243 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228244 = ORIENTED_EDGE('',*,*,#228245,.T.); +#228245 = EDGE_CURVE('',#228238,#228246,#228248,.T.); +#228246 = VERTEX_POINT('',#228247); +#228247 = CARTESIAN_POINT('',(163.638541,-58.390929,1.585)); +#228248 = CIRCLE('',#228249,7.500005951702E-02); +#228249 = AXIS2_PLACEMENT_3D('',#228250,#228251,#228252); +#228250 = CARTESIAN_POINT('',(163.69998306294,-58.34791874739,1.585)); +#228251 = DIRECTION('',(0.,0.,-1.)); +#228252 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228253 = ORIENTED_EDGE('',*,*,#228254,.T.); +#228254 = EDGE_CURVE('',#228246,#228255,#228257,.T.); +#228255 = VERTEX_POINT('',#228256); +#228256 = CARTESIAN_POINT('',(163.327601,-57.946728,1.585)); +#228257 = LINE('',#228258,#228259); +#228258 = CARTESIAN_POINT('',(163.638541,-58.390929,1.585)); +#228259 = VECTOR('',#228260,1.); +#228260 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228261 = ORIENTED_EDGE('',*,*,#228262,.T.); +#228262 = EDGE_CURVE('',#228255,#228263,#228265,.T.); +#228263 = VERTEX_POINT('',#228264); +#228264 = CARTESIAN_POINT('',(163.203555,-57.946728,1.585)); +#228265 = LINE('',#228266,#228267); +#228266 = CARTESIAN_POINT('',(163.327601,-57.946728,1.585)); +#228267 = VECTOR('',#228268,1.); +#228268 = DIRECTION('',(-1.,0.,0.)); +#228269 = ORIENTED_EDGE('',*,*,#228270,.T.); +#228270 = EDGE_CURVE('',#228263,#228271,#228273,.T.); +#228271 = VERTEX_POINT('',#228272); +#228272 = CARTESIAN_POINT('',(163.202114,-58.362551,1.585)); +#228273 = LINE('',#228274,#228275); +#228274 = CARTESIAN_POINT('',(163.203555,-57.946728,1.585)); +#228275 = VECTOR('',#228276,1.); +#228276 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228277 = ORIENTED_EDGE('',*,*,#228278,.T.); +#228278 = EDGE_CURVE('',#228271,#228279,#228281,.T.); +#228279 = VERTEX_POINT('',#228280); +#228280 = CARTESIAN_POINT('',(163.053555,-58.347919,1.585)); +#228281 = CIRCLE('',#228282,7.500006711464E-02); +#228282 = AXIS2_PLACEMENT_3D('',#228283,#228284,#228285); +#228283 = CARTESIAN_POINT('',(163.12855506711,-58.34791906711,1.585)); +#228284 = DIRECTION('',(-0.,0.,-1.)); +#228285 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228286 = ORIENTED_EDGE('',*,*,#228287,.T.); +#228287 = EDGE_CURVE('',#228279,#228185,#228288,.T.); +#228288 = LINE('',#228289,#228290); +#228289 = CARTESIAN_POINT('',(163.053555,-58.347919,1.585)); +#228290 = VECTOR('',#228291,1.); +#228291 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228292 = FACE_BOUND('',#228293,.F.); +#228293 = EDGE_LOOP('',(#228294,#228305,#228313,#228321,#228329,#228338) + ); +#228294 = ORIENTED_EDGE('',*,*,#228295,.T.); +#228295 = EDGE_CURVE('',#228296,#228298,#228300,.T.); +#228296 = VERTEX_POINT('',#228297); +#228297 = CARTESIAN_POINT('',(163.624983,-57.5561,1.585)); +#228298 = VERTEX_POINT('',#228299); +#228299 = CARTESIAN_POINT('',(163.491802,-57.422919,1.585)); +#228300 = CIRCLE('',#228301,0.18686440374); +#228301 = AXIS2_PLACEMENT_3D('',#228302,#228303,#228304); +#228302 = CARTESIAN_POINT('',(163.444266,-57.603636,1.585)); +#228303 = DIRECTION('',(0.,0.,1.)); +#228304 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228305 = ORIENTED_EDGE('',*,*,#228306,.T.); +#228306 = EDGE_CURVE('',#228298,#228307,#228309,.T.); +#228307 = VERTEX_POINT('',#228308); +#228308 = CARTESIAN_POINT('',(163.203555,-57.422919,1.585)); +#228309 = LINE('',#228310,#228311); +#228310 = CARTESIAN_POINT('',(163.491802,-57.422919,1.585)); +#228311 = VECTOR('',#228312,1.); +#228312 = DIRECTION('',(-1.,0.,0.)); +#228313 = ORIENTED_EDGE('',*,*,#228314,.T.); +#228314 = EDGE_CURVE('',#228307,#228315,#228317,.T.); +#228315 = VERTEX_POINT('',#228316); +#228316 = CARTESIAN_POINT('',(163.203555,-57.796728,1.585)); +#228317 = LINE('',#228318,#228319); +#228318 = CARTESIAN_POINT('',(163.203555,-57.422919,1.585)); +#228319 = VECTOR('',#228320,1.); +#228320 = DIRECTION('',(0.,-1.,0.)); +#228321 = ORIENTED_EDGE('',*,*,#228322,.T.); +#228322 = EDGE_CURVE('',#228315,#228323,#228325,.T.); +#228323 = VERTEX_POINT('',#228324); +#228324 = CARTESIAN_POINT('',(163.491802,-57.796728,1.585)); +#228325 = LINE('',#228326,#228327); +#228326 = CARTESIAN_POINT('',(163.203555,-57.796728,1.585)); +#228327 = VECTOR('',#228328,1.); +#228328 = DIRECTION('',(1.,0.,0.)); +#228329 = ORIENTED_EDGE('',*,*,#228330,.T.); +#228330 = EDGE_CURVE('',#228323,#228331,#228333,.T.); +#228331 = VERTEX_POINT('',#228332); +#228332 = CARTESIAN_POINT('',(163.624983,-57.663547,1.585)); +#228333 = CIRCLE('',#228334,0.18686440374); +#228334 = AXIS2_PLACEMENT_3D('',#228335,#228336,#228337); +#228335 = CARTESIAN_POINT('',(163.444266,-57.616011,1.585)); +#228336 = DIRECTION('',(0.,0.,1.)); +#228337 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#228338 = ORIENTED_EDGE('',*,*,#228339,.T.); +#228339 = EDGE_CURVE('',#228331,#228296,#228340,.T.); +#228340 = LINE('',#228341,#228342); +#228341 = CARTESIAN_POINT('',(163.624983,-57.663547,1.585)); +#228342 = VECTOR('',#228343,1.); +#228343 = DIRECTION('',(0.,1.,0.)); +#228344 = PLANE('',#228345); +#228345 = AXIS2_PLACEMENT_3D('',#228346,#228347,#228348); +#228346 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228347 = DIRECTION('',(0.,0.,1.)); +#228348 = DIRECTION('',(1.,0.,-0.)); +#228349 = SHELL_BASED_SURFACE_MODEL('',(#228350)); +#228350 = OPEN_SHELL('',(#228351)); +#228351 = ADVANCED_FACE('',(#228352,#228463),#228515,.T.); +#228352 = FACE_BOUND('',#228353,.F.); +#228353 = EDGE_LOOP('',(#228354,#228365,#228373,#228382,#228390,#228399, + #228407,#228415,#228424,#228432,#228440,#228448,#228457)); +#228354 = ORIENTED_EDGE('',*,*,#228355,.T.); +#228355 = EDGE_CURVE('',#228356,#228358,#228360,.T.); +#228356 = VERTEX_POINT('',#228357); +#228357 = CARTESIAN_POINT('',(166.554996,-57.333287,1.585)); +#228358 = VERTEX_POINT('',#228359); +#228359 = CARTESIAN_POINT('',(166.628555,-57.272919,1.585)); +#228360 = CIRCLE('',#228361,7.500074938989E-02); +#228361 = AXIS2_PLACEMENT_3D('',#228362,#228363,#228364); +#228362 = CARTESIAN_POINT('',(166.62855546611,-57.34791974938,1.585)); +#228363 = DIRECTION('',(0.,0.,-1.)); +#228364 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228365 = ORIENTED_EDGE('',*,*,#228366,.T.); +#228366 = EDGE_CURVE('',#228358,#228367,#228369,.T.); +#228367 = VERTEX_POINT('',#228368); +#228368 = CARTESIAN_POINT('',(167.024139,-57.27436,1.585)); +#228369 = LINE('',#228370,#228371); +#228370 = CARTESIAN_POINT('',(166.628555,-57.272919,1.585)); +#228371 = VECTOR('',#228372,1.); +#228372 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#228373 = ORIENTED_EDGE('',*,*,#228374,.T.); +#228374 = EDGE_CURVE('',#228367,#228375,#228377,.T.); +#228375 = VERTEX_POINT('',#228376); +#228376 = CARTESIAN_POINT('',(167.273542,-57.523763,1.585)); +#228377 = CIRCLE('',#228378,0.347870264855); +#228378 = AXIS2_PLACEMENT_3D('',#228379,#228380,#228381); +#228379 = CARTESIAN_POINT('',(166.93681126502,-57.61109073497,1.585)); +#228380 = DIRECTION('',(0.,0.,-1.)); +#228381 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228382 = ORIENTED_EDGE('',*,*,#228383,.T.); +#228383 = EDGE_CURVE('',#228375,#228384,#228386,.T.); +#228384 = VERTEX_POINT('',#228385); +#228385 = CARTESIAN_POINT('',(167.27232,-57.701062,1.585)); +#228386 = LINE('',#228387,#228388); +#228387 = CARTESIAN_POINT('',(167.273542,-57.523763,1.585)); +#228388 = VECTOR('',#228389,1.); +#228389 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#228390 = ORIENTED_EDGE('',*,*,#228391,.T.); +#228391 = EDGE_CURVE('',#228384,#228392,#228394,.T.); +#228392 = VERTEX_POINT('',#228393); +#228393 = CARTESIAN_POINT('',(167.024139,-57.945287,1.585)); +#228394 = CIRCLE('',#228395,0.348632345849); +#228395 = AXIS2_PLACEMENT_3D('',#228396,#228397,#228398); +#228396 = CARTESIAN_POINT('',(166.93637019403,-57.6078834593,1.585)); +#228397 = DIRECTION('',(0.,0.,-1.)); +#228398 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228399 = ORIENTED_EDGE('',*,*,#228400,.T.); +#228400 = EDGE_CURVE('',#228392,#228401,#228403,.T.); +#228401 = VERTEX_POINT('',#228402); +#228402 = CARTESIAN_POINT('',(167.010622,-57.946618,1.585)); +#228403 = LINE('',#228404,#228405); +#228404 = CARTESIAN_POINT('',(167.024139,-57.945287,1.585)); +#228405 = VECTOR('',#228406,1.); +#228406 = DIRECTION('',(-0.995186940545,-9.799465989996E-02,0.)); +#228407 = ORIENTED_EDGE('',*,*,#228408,.T.); +#228408 = EDGE_CURVE('',#228401,#228409,#228411,.T.); +#228409 = VERTEX_POINT('',#228410); +#228410 = CARTESIAN_POINT('',(167.268636,-58.317723,1.585)); +#228411 = LINE('',#228412,#228413); +#228412 = CARTESIAN_POINT('',(167.010622,-57.946618,1.585)); +#228413 = VECTOR('',#228414,1.); +#228414 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228415 = ORIENTED_EDGE('',*,*,#228416,.T.); +#228416 = EDGE_CURVE('',#228409,#228417,#228419,.T.); +#228417 = VERTEX_POINT('',#228418); +#228418 = CARTESIAN_POINT('',(167.138541,-58.390929,1.585)); +#228419 = CIRCLE('',#228420,7.500005951702E-02); +#228420 = AXIS2_PLACEMENT_3D('',#228421,#228422,#228423); +#228421 = CARTESIAN_POINT('',(167.19998306294,-58.34791874739,1.585)); +#228422 = DIRECTION('',(0.,0.,-1.)); +#228423 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228424 = ORIENTED_EDGE('',*,*,#228425,.T.); +#228425 = EDGE_CURVE('',#228417,#228426,#228428,.T.); +#228426 = VERTEX_POINT('',#228427); +#228427 = CARTESIAN_POINT('',(166.827601,-57.946728,1.585)); +#228428 = LINE('',#228429,#228430); +#228429 = CARTESIAN_POINT('',(167.138541,-58.390929,1.585)); +#228430 = VECTOR('',#228431,1.); +#228431 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228432 = ORIENTED_EDGE('',*,*,#228433,.T.); +#228433 = EDGE_CURVE('',#228426,#228434,#228436,.T.); +#228434 = VERTEX_POINT('',#228435); +#228435 = CARTESIAN_POINT('',(166.703555,-57.946728,1.585)); +#228436 = LINE('',#228437,#228438); +#228437 = CARTESIAN_POINT('',(166.827601,-57.946728,1.585)); +#228438 = VECTOR('',#228439,1.); +#228439 = DIRECTION('',(-1.,0.,0.)); +#228440 = ORIENTED_EDGE('',*,*,#228441,.T.); +#228441 = EDGE_CURVE('',#228434,#228442,#228444,.T.); +#228442 = VERTEX_POINT('',#228443); +#228443 = CARTESIAN_POINT('',(166.702114,-58.362551,1.585)); +#228444 = LINE('',#228445,#228446); +#228445 = CARTESIAN_POINT('',(166.703555,-57.946728,1.585)); +#228446 = VECTOR('',#228447,1.); +#228447 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228448 = ORIENTED_EDGE('',*,*,#228449,.T.); +#228449 = EDGE_CURVE('',#228442,#228450,#228452,.T.); +#228450 = VERTEX_POINT('',#228451); +#228451 = CARTESIAN_POINT('',(166.553555,-58.347919,1.585)); +#228452 = CIRCLE('',#228453,7.500006711464E-02); +#228453 = AXIS2_PLACEMENT_3D('',#228454,#228455,#228456); +#228454 = CARTESIAN_POINT('',(166.62855506711,-58.34791906711,1.585)); +#228455 = DIRECTION('',(-0.,0.,-1.)); +#228456 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228457 = ORIENTED_EDGE('',*,*,#228458,.T.); +#228458 = EDGE_CURVE('',#228450,#228356,#228459,.T.); +#228459 = LINE('',#228460,#228461); +#228460 = CARTESIAN_POINT('',(166.553555,-58.347919,1.585)); +#228461 = VECTOR('',#228462,1.); +#228462 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228463 = FACE_BOUND('',#228464,.F.); +#228464 = EDGE_LOOP('',(#228465,#228476,#228484,#228492,#228500,#228509) + ); +#228465 = ORIENTED_EDGE('',*,*,#228466,.T.); +#228466 = EDGE_CURVE('',#228467,#228469,#228471,.T.); +#228467 = VERTEX_POINT('',#228468); +#228468 = CARTESIAN_POINT('',(167.124983,-57.5561,1.585)); +#228469 = VERTEX_POINT('',#228470); +#228470 = CARTESIAN_POINT('',(166.991802,-57.422919,1.585)); +#228471 = CIRCLE('',#228472,0.18686440374); +#228472 = AXIS2_PLACEMENT_3D('',#228473,#228474,#228475); +#228473 = CARTESIAN_POINT('',(166.944266,-57.603636,1.585)); +#228474 = DIRECTION('',(0.,0.,1.)); +#228475 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228476 = ORIENTED_EDGE('',*,*,#228477,.T.); +#228477 = EDGE_CURVE('',#228469,#228478,#228480,.T.); +#228478 = VERTEX_POINT('',#228479); +#228479 = CARTESIAN_POINT('',(166.703555,-57.422919,1.585)); +#228480 = LINE('',#228481,#228482); +#228481 = CARTESIAN_POINT('',(166.991802,-57.422919,1.585)); +#228482 = VECTOR('',#228483,1.); +#228483 = DIRECTION('',(-1.,0.,0.)); +#228484 = ORIENTED_EDGE('',*,*,#228485,.T.); +#228485 = EDGE_CURVE('',#228478,#228486,#228488,.T.); +#228486 = VERTEX_POINT('',#228487); +#228487 = CARTESIAN_POINT('',(166.703555,-57.796728,1.585)); +#228488 = LINE('',#228489,#228490); +#228489 = CARTESIAN_POINT('',(166.703555,-57.422919,1.585)); +#228490 = VECTOR('',#228491,1.); +#228491 = DIRECTION('',(0.,-1.,0.)); +#228492 = ORIENTED_EDGE('',*,*,#228493,.T.); +#228493 = EDGE_CURVE('',#228486,#228494,#228496,.T.); +#228494 = VERTEX_POINT('',#228495); +#228495 = CARTESIAN_POINT('',(166.991802,-57.796728,1.585)); +#228496 = LINE('',#228497,#228498); +#228497 = CARTESIAN_POINT('',(166.703555,-57.796728,1.585)); +#228498 = VECTOR('',#228499,1.); +#228499 = DIRECTION('',(1.,0.,0.)); +#228500 = ORIENTED_EDGE('',*,*,#228501,.T.); +#228501 = EDGE_CURVE('',#228494,#228502,#228504,.T.); +#228502 = VERTEX_POINT('',#228503); +#228503 = CARTESIAN_POINT('',(167.124983,-57.663547,1.585)); +#228504 = CIRCLE('',#228505,0.18686440374); +#228505 = AXIS2_PLACEMENT_3D('',#228506,#228507,#228508); +#228506 = CARTESIAN_POINT('',(166.944266,-57.616011,1.585)); +#228507 = DIRECTION('',(0.,0.,1.)); +#228508 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#228509 = ORIENTED_EDGE('',*,*,#228510,.T.); +#228510 = EDGE_CURVE('',#228502,#228467,#228511,.T.); +#228511 = LINE('',#228512,#228513); +#228512 = CARTESIAN_POINT('',(167.124983,-57.663547,1.585)); +#228513 = VECTOR('',#228514,1.); +#228514 = DIRECTION('',(0.,1.,0.)); +#228515 = PLANE('',#228516); +#228516 = AXIS2_PLACEMENT_3D('',#228517,#228518,#228519); +#228517 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228518 = DIRECTION('',(0.,0.,1.)); +#228519 = DIRECTION('',(1.,0.,-0.)); +#228520 = SHELL_BASED_SURFACE_MODEL('',(#228521)); +#228521 = OPEN_SHELL('',(#228522)); +#228522 = ADVANCED_FACE('',(#228523,#228634),#228686,.T.); +#228523 = FACE_BOUND('',#228524,.F.); +#228524 = EDGE_LOOP('',(#228525,#228536,#228544,#228553,#228561,#228570, + #228578,#228586,#228595,#228603,#228611,#228619,#228628)); +#228525 = ORIENTED_EDGE('',*,*,#228526,.T.); +#228526 = EDGE_CURVE('',#228527,#228529,#228531,.T.); +#228527 = VERTEX_POINT('',#228528); +#228528 = CARTESIAN_POINT('',(172.499043,-57.333287,1.585)); +#228529 = VERTEX_POINT('',#228530); +#228530 = CARTESIAN_POINT('',(172.572602,-57.272919,1.585)); +#228531 = CIRCLE('',#228532,7.500074938991E-02); +#228532 = AXIS2_PLACEMENT_3D('',#228533,#228534,#228535); +#228533 = CARTESIAN_POINT('',(172.57260246611,-57.34791974938,1.585)); +#228534 = DIRECTION('',(0.,0.,-1.)); +#228535 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228536 = ORIENTED_EDGE('',*,*,#228537,.T.); +#228537 = EDGE_CURVE('',#228529,#228538,#228540,.T.); +#228538 = VERTEX_POINT('',#228539); +#228539 = CARTESIAN_POINT('',(172.968186,-57.27436,1.585)); +#228540 = LINE('',#228541,#228542); +#228541 = CARTESIAN_POINT('',(172.572602,-57.272919,1.585)); +#228542 = VECTOR('',#228543,1.); +#228543 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#228544 = ORIENTED_EDGE('',*,*,#228545,.T.); +#228545 = EDGE_CURVE('',#228538,#228546,#228548,.T.); +#228546 = VERTEX_POINT('',#228547); +#228547 = CARTESIAN_POINT('',(173.217589,-57.523763,1.585)); +#228548 = CIRCLE('',#228549,0.347870264855); +#228549 = AXIS2_PLACEMENT_3D('',#228550,#228551,#228552); +#228550 = CARTESIAN_POINT('',(172.88085826502,-57.61109073497,1.585)); +#228551 = DIRECTION('',(0.,0.,-1.)); +#228552 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228553 = ORIENTED_EDGE('',*,*,#228554,.T.); +#228554 = EDGE_CURVE('',#228546,#228555,#228557,.T.); +#228555 = VERTEX_POINT('',#228556); +#228556 = CARTESIAN_POINT('',(173.216367,-57.701062,1.585)); +#228557 = LINE('',#228558,#228559); +#228558 = CARTESIAN_POINT('',(173.217589,-57.523763,1.585)); +#228559 = VECTOR('',#228560,1.); +#228560 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#228561 = ORIENTED_EDGE('',*,*,#228562,.T.); +#228562 = EDGE_CURVE('',#228555,#228563,#228565,.T.); +#228563 = VERTEX_POINT('',#228564); +#228564 = CARTESIAN_POINT('',(172.968186,-57.945287,1.585)); +#228565 = CIRCLE('',#228566,0.348632345848); +#228566 = AXIS2_PLACEMENT_3D('',#228567,#228568,#228569); +#228567 = CARTESIAN_POINT('',(172.88041719403,-57.6078834593,1.585)); +#228568 = DIRECTION('',(0.,0.,-1.)); +#228569 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228570 = ORIENTED_EDGE('',*,*,#228571,.T.); +#228571 = EDGE_CURVE('',#228563,#228572,#228574,.T.); +#228572 = VERTEX_POINT('',#228573); +#228573 = CARTESIAN_POINT('',(172.954669,-57.946618,1.585)); +#228574 = LINE('',#228575,#228576); +#228575 = CARTESIAN_POINT('',(172.968186,-57.945287,1.585)); +#228576 = VECTOR('',#228577,1.); +#228577 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#228578 = ORIENTED_EDGE('',*,*,#228579,.T.); +#228579 = EDGE_CURVE('',#228572,#228580,#228582,.T.); +#228580 = VERTEX_POINT('',#228581); +#228581 = CARTESIAN_POINT('',(173.212683,-58.317723,1.585)); +#228582 = LINE('',#228583,#228584); +#228583 = CARTESIAN_POINT('',(172.954669,-57.946618,1.585)); +#228584 = VECTOR('',#228585,1.); +#228585 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228586 = ORIENTED_EDGE('',*,*,#228587,.T.); +#228587 = EDGE_CURVE('',#228580,#228588,#228590,.T.); +#228588 = VERTEX_POINT('',#228589); +#228589 = CARTESIAN_POINT('',(173.082588,-58.390929,1.585)); +#228590 = CIRCLE('',#228591,7.500005951702E-02); +#228591 = AXIS2_PLACEMENT_3D('',#228592,#228593,#228594); +#228592 = CARTESIAN_POINT('',(173.14403006294,-58.34791874739,1.585)); +#228593 = DIRECTION('',(0.,0.,-1.)); +#228594 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228595 = ORIENTED_EDGE('',*,*,#228596,.T.); +#228596 = EDGE_CURVE('',#228588,#228597,#228599,.T.); +#228597 = VERTEX_POINT('',#228598); +#228598 = CARTESIAN_POINT('',(172.771648,-57.946728,1.585)); +#228599 = LINE('',#228600,#228601); +#228600 = CARTESIAN_POINT('',(173.082588,-58.390929,1.585)); +#228601 = VECTOR('',#228602,1.); +#228602 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228603 = ORIENTED_EDGE('',*,*,#228604,.T.); +#228604 = EDGE_CURVE('',#228597,#228605,#228607,.T.); +#228605 = VERTEX_POINT('',#228606); +#228606 = CARTESIAN_POINT('',(172.647602,-57.946728,1.585)); +#228607 = LINE('',#228608,#228609); +#228608 = CARTESIAN_POINT('',(172.771648,-57.946728,1.585)); +#228609 = VECTOR('',#228610,1.); +#228610 = DIRECTION('',(-1.,0.,0.)); +#228611 = ORIENTED_EDGE('',*,*,#228612,.T.); +#228612 = EDGE_CURVE('',#228605,#228613,#228615,.T.); +#228613 = VERTEX_POINT('',#228614); +#228614 = CARTESIAN_POINT('',(172.646161,-58.362551,1.585)); +#228615 = LINE('',#228616,#228617); +#228616 = CARTESIAN_POINT('',(172.647602,-57.946728,1.585)); +#228617 = VECTOR('',#228618,1.); +#228618 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228619 = ORIENTED_EDGE('',*,*,#228620,.T.); +#228620 = EDGE_CURVE('',#228613,#228621,#228623,.T.); +#228621 = VERTEX_POINT('',#228622); +#228622 = CARTESIAN_POINT('',(172.497602,-58.347919,1.585)); +#228623 = CIRCLE('',#228624,7.500006711464E-02); +#228624 = AXIS2_PLACEMENT_3D('',#228625,#228626,#228627); +#228625 = CARTESIAN_POINT('',(172.57260206711,-58.34791906711,1.585)); +#228626 = DIRECTION('',(-0.,0.,-1.)); +#228627 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228628 = ORIENTED_EDGE('',*,*,#228629,.T.); +#228629 = EDGE_CURVE('',#228621,#228527,#228630,.T.); +#228630 = LINE('',#228631,#228632); +#228631 = CARTESIAN_POINT('',(172.497602,-58.347919,1.585)); +#228632 = VECTOR('',#228633,1.); +#228633 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228634 = FACE_BOUND('',#228635,.F.); +#228635 = EDGE_LOOP('',(#228636,#228647,#228655,#228663,#228671,#228680) + ); +#228636 = ORIENTED_EDGE('',*,*,#228637,.T.); +#228637 = EDGE_CURVE('',#228638,#228640,#228642,.T.); +#228638 = VERTEX_POINT('',#228639); +#228639 = CARTESIAN_POINT('',(173.06903,-57.5561,1.585)); +#228640 = VERTEX_POINT('',#228641); +#228641 = CARTESIAN_POINT('',(172.935849,-57.422919,1.585)); +#228642 = CIRCLE('',#228643,0.18686440374); +#228643 = AXIS2_PLACEMENT_3D('',#228644,#228645,#228646); +#228644 = CARTESIAN_POINT('',(172.888313,-57.603636,1.585)); +#228645 = DIRECTION('',(0.,0.,1.)); +#228646 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228647 = ORIENTED_EDGE('',*,*,#228648,.T.); +#228648 = EDGE_CURVE('',#228640,#228649,#228651,.T.); +#228649 = VERTEX_POINT('',#228650); +#228650 = CARTESIAN_POINT('',(172.647602,-57.422919,1.585)); +#228651 = LINE('',#228652,#228653); +#228652 = CARTESIAN_POINT('',(172.935849,-57.422919,1.585)); +#228653 = VECTOR('',#228654,1.); +#228654 = DIRECTION('',(-1.,0.,0.)); +#228655 = ORIENTED_EDGE('',*,*,#228656,.T.); +#228656 = EDGE_CURVE('',#228649,#228657,#228659,.T.); +#228657 = VERTEX_POINT('',#228658); +#228658 = CARTESIAN_POINT('',(172.647602,-57.796728,1.585)); +#228659 = LINE('',#228660,#228661); +#228660 = CARTESIAN_POINT('',(172.647602,-57.422919,1.585)); +#228661 = VECTOR('',#228662,1.); +#228662 = DIRECTION('',(0.,-1.,0.)); +#228663 = ORIENTED_EDGE('',*,*,#228664,.T.); +#228664 = EDGE_CURVE('',#228657,#228665,#228667,.T.); +#228665 = VERTEX_POINT('',#228666); +#228666 = CARTESIAN_POINT('',(172.935849,-57.796728,1.585)); +#228667 = LINE('',#228668,#228669); +#228668 = CARTESIAN_POINT('',(172.647602,-57.796728,1.585)); +#228669 = VECTOR('',#228670,1.); +#228670 = DIRECTION('',(1.,0.,0.)); +#228671 = ORIENTED_EDGE('',*,*,#228672,.T.); +#228672 = EDGE_CURVE('',#228665,#228673,#228675,.T.); +#228673 = VERTEX_POINT('',#228674); +#228674 = CARTESIAN_POINT('',(173.06903,-57.663547,1.585)); +#228675 = CIRCLE('',#228676,0.18686440374); +#228676 = AXIS2_PLACEMENT_3D('',#228677,#228678,#228679); +#228677 = CARTESIAN_POINT('',(172.888313,-57.616011,1.585)); +#228678 = DIRECTION('',(0.,0.,1.)); +#228679 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#228680 = ORIENTED_EDGE('',*,*,#228681,.T.); +#228681 = EDGE_CURVE('',#228673,#228638,#228682,.T.); +#228682 = LINE('',#228683,#228684); +#228683 = CARTESIAN_POINT('',(173.06903,-57.663547,1.585)); +#228684 = VECTOR('',#228685,1.); +#228685 = DIRECTION('',(0.,1.,0.)); +#228686 = PLANE('',#228687); +#228687 = AXIS2_PLACEMENT_3D('',#228688,#228689,#228690); +#228688 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228689 = DIRECTION('',(0.,0.,1.)); +#228690 = DIRECTION('',(1.,0.,-0.)); +#228691 = SHELL_BASED_SURFACE_MODEL('',(#228692)); +#228692 = OPEN_SHELL('',(#228693)); +#228693 = ADVANCED_FACE('',(#228694,#228805),#228857,.T.); +#228694 = FACE_BOUND('',#228695,.F.); +#228695 = EDGE_LOOP('',(#228696,#228707,#228715,#228724,#228732,#228741, + #228749,#228757,#228766,#228774,#228782,#228790,#228799)); +#228696 = ORIENTED_EDGE('',*,*,#228697,.T.); +#228697 = EDGE_CURVE('',#228698,#228700,#228702,.T.); +#228698 = VERTEX_POINT('',#228699); +#228699 = CARTESIAN_POINT('',(176.499043,-57.333287,1.585)); +#228700 = VERTEX_POINT('',#228701); +#228701 = CARTESIAN_POINT('',(176.572602,-57.272919,1.585)); +#228702 = CIRCLE('',#228703,7.500074938991E-02); +#228703 = AXIS2_PLACEMENT_3D('',#228704,#228705,#228706); +#228704 = CARTESIAN_POINT('',(176.57260246611,-57.34791974938,1.585)); +#228705 = DIRECTION('',(0.,0.,-1.)); +#228706 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228707 = ORIENTED_EDGE('',*,*,#228708,.T.); +#228708 = EDGE_CURVE('',#228700,#228709,#228711,.T.); +#228709 = VERTEX_POINT('',#228710); +#228710 = CARTESIAN_POINT('',(176.968186,-57.27436,1.585)); +#228711 = LINE('',#228712,#228713); +#228712 = CARTESIAN_POINT('',(176.572602,-57.272919,1.585)); +#228713 = VECTOR('',#228714,1.); +#228714 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#228715 = ORIENTED_EDGE('',*,*,#228716,.T.); +#228716 = EDGE_CURVE('',#228709,#228717,#228719,.T.); +#228717 = VERTEX_POINT('',#228718); +#228718 = CARTESIAN_POINT('',(177.217589,-57.523763,1.585)); +#228719 = CIRCLE('',#228720,0.347870264855); +#228720 = AXIS2_PLACEMENT_3D('',#228721,#228722,#228723); +#228721 = CARTESIAN_POINT('',(176.88085826502,-57.61109073497,1.585)); +#228722 = DIRECTION('',(0.,0.,-1.)); +#228723 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228724 = ORIENTED_EDGE('',*,*,#228725,.T.); +#228725 = EDGE_CURVE('',#228717,#228726,#228728,.T.); +#228726 = VERTEX_POINT('',#228727); +#228727 = CARTESIAN_POINT('',(177.216367,-57.701062,1.585)); +#228728 = LINE('',#228729,#228730); +#228729 = CARTESIAN_POINT('',(177.217589,-57.523763,1.585)); +#228730 = VECTOR('',#228731,1.); +#228731 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#228732 = ORIENTED_EDGE('',*,*,#228733,.T.); +#228733 = EDGE_CURVE('',#228726,#228734,#228736,.T.); +#228734 = VERTEX_POINT('',#228735); +#228735 = CARTESIAN_POINT('',(176.968186,-57.945287,1.585)); +#228736 = CIRCLE('',#228737,0.348632345848); +#228737 = AXIS2_PLACEMENT_3D('',#228738,#228739,#228740); +#228738 = CARTESIAN_POINT('',(176.88041719403,-57.6078834593,1.585)); +#228739 = DIRECTION('',(0.,0.,-1.)); +#228740 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228741 = ORIENTED_EDGE('',*,*,#228742,.T.); +#228742 = EDGE_CURVE('',#228734,#228743,#228745,.T.); +#228743 = VERTEX_POINT('',#228744); +#228744 = CARTESIAN_POINT('',(176.954669,-57.946618,1.585)); +#228745 = LINE('',#228746,#228747); +#228746 = CARTESIAN_POINT('',(176.968186,-57.945287,1.585)); +#228747 = VECTOR('',#228748,1.); +#228748 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#228749 = ORIENTED_EDGE('',*,*,#228750,.T.); +#228750 = EDGE_CURVE('',#228743,#228751,#228753,.T.); +#228751 = VERTEX_POINT('',#228752); +#228752 = CARTESIAN_POINT('',(177.212683,-58.317723,1.585)); +#228753 = LINE('',#228754,#228755); +#228754 = CARTESIAN_POINT('',(176.954669,-57.946618,1.585)); +#228755 = VECTOR('',#228756,1.); +#228756 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228757 = ORIENTED_EDGE('',*,*,#228758,.T.); +#228758 = EDGE_CURVE('',#228751,#228759,#228761,.T.); +#228759 = VERTEX_POINT('',#228760); +#228760 = CARTESIAN_POINT('',(177.082588,-58.390929,1.585)); +#228761 = CIRCLE('',#228762,7.500005951702E-02); +#228762 = AXIS2_PLACEMENT_3D('',#228763,#228764,#228765); +#228763 = CARTESIAN_POINT('',(177.14403006294,-58.34791874739,1.585)); +#228764 = DIRECTION('',(0.,0.,-1.)); +#228765 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228766 = ORIENTED_EDGE('',*,*,#228767,.T.); +#228767 = EDGE_CURVE('',#228759,#228768,#228770,.T.); +#228768 = VERTEX_POINT('',#228769); +#228769 = CARTESIAN_POINT('',(176.771648,-57.946728,1.585)); +#228770 = LINE('',#228771,#228772); +#228771 = CARTESIAN_POINT('',(177.082588,-58.390929,1.585)); +#228772 = VECTOR('',#228773,1.); +#228773 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228774 = ORIENTED_EDGE('',*,*,#228775,.T.); +#228775 = EDGE_CURVE('',#228768,#228776,#228778,.T.); +#228776 = VERTEX_POINT('',#228777); +#228777 = CARTESIAN_POINT('',(176.647602,-57.946728,1.585)); +#228778 = LINE('',#228779,#228780); +#228779 = CARTESIAN_POINT('',(176.771648,-57.946728,1.585)); +#228780 = VECTOR('',#228781,1.); +#228781 = DIRECTION('',(-1.,0.,0.)); +#228782 = ORIENTED_EDGE('',*,*,#228783,.T.); +#228783 = EDGE_CURVE('',#228776,#228784,#228786,.T.); +#228784 = VERTEX_POINT('',#228785); +#228785 = CARTESIAN_POINT('',(176.646161,-58.362551,1.585)); +#228786 = LINE('',#228787,#228788); +#228787 = CARTESIAN_POINT('',(176.647602,-57.946728,1.585)); +#228788 = VECTOR('',#228789,1.); +#228789 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228790 = ORIENTED_EDGE('',*,*,#228791,.T.); +#228791 = EDGE_CURVE('',#228784,#228792,#228794,.T.); +#228792 = VERTEX_POINT('',#228793); +#228793 = CARTESIAN_POINT('',(176.497602,-58.347919,1.585)); +#228794 = CIRCLE('',#228795,7.500006711464E-02); +#228795 = AXIS2_PLACEMENT_3D('',#228796,#228797,#228798); +#228796 = CARTESIAN_POINT('',(176.57260206711,-58.34791906711,1.585)); +#228797 = DIRECTION('',(-0.,0.,-1.)); +#228798 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228799 = ORIENTED_EDGE('',*,*,#228800,.T.); +#228800 = EDGE_CURVE('',#228792,#228698,#228801,.T.); +#228801 = LINE('',#228802,#228803); +#228802 = CARTESIAN_POINT('',(176.497602,-58.347919,1.585)); +#228803 = VECTOR('',#228804,1.); +#228804 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228805 = FACE_BOUND('',#228806,.F.); +#228806 = EDGE_LOOP('',(#228807,#228818,#228826,#228834,#228842,#228851) + ); +#228807 = ORIENTED_EDGE('',*,*,#228808,.T.); +#228808 = EDGE_CURVE('',#228809,#228811,#228813,.T.); +#228809 = VERTEX_POINT('',#228810); +#228810 = CARTESIAN_POINT('',(177.06903,-57.5561,1.585)); +#228811 = VERTEX_POINT('',#228812); +#228812 = CARTESIAN_POINT('',(176.935849,-57.422919,1.585)); +#228813 = CIRCLE('',#228814,0.18686440374); +#228814 = AXIS2_PLACEMENT_3D('',#228815,#228816,#228817); +#228815 = CARTESIAN_POINT('',(176.888313,-57.603636,1.585)); +#228816 = DIRECTION('',(0.,0.,1.)); +#228817 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228818 = ORIENTED_EDGE('',*,*,#228819,.T.); +#228819 = EDGE_CURVE('',#228811,#228820,#228822,.T.); +#228820 = VERTEX_POINT('',#228821); +#228821 = CARTESIAN_POINT('',(176.647602,-57.422919,1.585)); +#228822 = LINE('',#228823,#228824); +#228823 = CARTESIAN_POINT('',(176.935849,-57.422919,1.585)); +#228824 = VECTOR('',#228825,1.); +#228825 = DIRECTION('',(-1.,0.,0.)); +#228826 = ORIENTED_EDGE('',*,*,#228827,.T.); +#228827 = EDGE_CURVE('',#228820,#228828,#228830,.T.); +#228828 = VERTEX_POINT('',#228829); +#228829 = CARTESIAN_POINT('',(176.647602,-57.796728,1.585)); +#228830 = LINE('',#228831,#228832); +#228831 = CARTESIAN_POINT('',(176.647602,-57.422919,1.585)); +#228832 = VECTOR('',#228833,1.); +#228833 = DIRECTION('',(0.,-1.,0.)); +#228834 = ORIENTED_EDGE('',*,*,#228835,.T.); +#228835 = EDGE_CURVE('',#228828,#228836,#228838,.T.); +#228836 = VERTEX_POINT('',#228837); +#228837 = CARTESIAN_POINT('',(176.935849,-57.796728,1.585)); +#228838 = LINE('',#228839,#228840); +#228839 = CARTESIAN_POINT('',(176.647602,-57.796728,1.585)); +#228840 = VECTOR('',#228841,1.); +#228841 = DIRECTION('',(1.,0.,0.)); +#228842 = ORIENTED_EDGE('',*,*,#228843,.T.); +#228843 = EDGE_CURVE('',#228836,#228844,#228846,.T.); +#228844 = VERTEX_POINT('',#228845); +#228845 = CARTESIAN_POINT('',(177.06903,-57.663547,1.585)); +#228846 = CIRCLE('',#228847,0.18686440374); +#228847 = AXIS2_PLACEMENT_3D('',#228848,#228849,#228850); +#228848 = CARTESIAN_POINT('',(176.888313,-57.616011,1.585)); +#228849 = DIRECTION('',(0.,0.,1.)); +#228850 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#228851 = ORIENTED_EDGE('',*,*,#228852,.T.); +#228852 = EDGE_CURVE('',#228844,#228809,#228853,.T.); +#228853 = LINE('',#228854,#228855); +#228854 = CARTESIAN_POINT('',(177.06903,-57.663547,1.585)); +#228855 = VECTOR('',#228856,1.); +#228856 = DIRECTION('',(0.,1.,0.)); +#228857 = PLANE('',#228858); +#228858 = AXIS2_PLACEMENT_3D('',#228859,#228860,#228861); +#228859 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228860 = DIRECTION('',(0.,0.,1.)); +#228861 = DIRECTION('',(1.,0.,-0.)); +#228862 = SHELL_BASED_SURFACE_MODEL('',(#228863)); +#228863 = OPEN_SHELL('',(#228864)); +#228864 = ADVANCED_FACE('',(#228865,#229037),#229088,.T.); +#228865 = FACE_BOUND('',#228866,.F.); +#228866 = EDGE_LOOP('',(#228867,#228878,#228886,#228894,#228902,#228910, + #228918,#228926,#228934,#228942,#228950,#228958,#228966,#228975, + #228983,#228991,#228999,#229007,#229015,#229023,#229031)); +#228867 = ORIENTED_EDGE('',*,*,#228868,.T.); +#228868 = EDGE_CURVE('',#228869,#228871,#228873,.T.); +#228869 = VERTEX_POINT('',#228870); +#228870 = CARTESIAN_POINT('',(173.539061,-57.661789,1.585)); +#228871 = VERTEX_POINT('',#228872); +#228872 = CARTESIAN_POINT('',(173.999538,-57.669621,1.585)); +#228873 = CIRCLE('',#228874,0.398777683503); +#228874 = AXIS2_PLACEMENT_3D('',#228875,#228876,#228877); +#228875 = CARTESIAN_POINT('',(173.76376278885,-57.99123208604,1.585)); +#228876 = DIRECTION('',(0.,0.,-1.)); +#228877 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#228878 = ORIENTED_EDGE('',*,*,#228879,.T.); +#228879 = EDGE_CURVE('',#228871,#228880,#228882,.T.); +#228880 = VERTEX_POINT('',#228881); +#228881 = CARTESIAN_POINT('',(174.020636,-57.69533,1.585)); +#228882 = LINE('',#228883,#228884); +#228883 = CARTESIAN_POINT('',(173.999538,-57.669621,1.585)); +#228884 = VECTOR('',#228885,1.); +#228885 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#228886 = ORIENTED_EDGE('',*,*,#228887,.T.); +#228887 = EDGE_CURVE('',#228880,#228888,#228890,.T.); +#228888 = VERTEX_POINT('',#228889); +#228889 = CARTESIAN_POINT('',(174.074732,-57.809477,1.585)); +#228890 = LINE('',#228891,#228892); +#228891 = CARTESIAN_POINT('',(174.020636,-57.69533,1.585)); +#228892 = VECTOR('',#228893,1.); +#228893 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#228894 = ORIENTED_EDGE('',*,*,#228895,.T.); +#228895 = EDGE_CURVE('',#228888,#228896,#228898,.T.); +#228896 = VERTEX_POINT('',#228897); +#228897 = CARTESIAN_POINT('',(174.074732,-57.933979,1.585)); +#228898 = LINE('',#228899,#228900); +#228899 = CARTESIAN_POINT('',(174.074732,-57.809477,1.585)); +#228900 = VECTOR('',#228901,1.); +#228901 = DIRECTION('',(0.,-1.,0.)); +#228902 = ORIENTED_EDGE('',*,*,#228903,.T.); +#228903 = EDGE_CURVE('',#228896,#228904,#228906,.T.); +#228904 = VERTEX_POINT('',#228905); +#228905 = CARTESIAN_POINT('',(174.054261,-57.972324,1.585)); +#228906 = LINE('',#228907,#228908); +#228907 = CARTESIAN_POINT('',(174.074732,-57.933979,1.585)); +#228908 = VECTOR('',#228909,1.); +#228909 = DIRECTION('',(-0.470952387879,-0.882158629925,0.)); +#228910 = ORIENTED_EDGE('',*,*,#228911,.T.); +#228911 = EDGE_CURVE('',#228904,#228912,#228914,.T.); +#228912 = VERTEX_POINT('',#228913); +#228913 = CARTESIAN_POINT('',(174.015881,-57.992891,1.585)); +#228914 = LINE('',#228915,#228916); +#228915 = CARTESIAN_POINT('',(174.054261,-57.972324,1.585)); +#228916 = VECTOR('',#228917,1.); +#228917 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#228918 = ORIENTED_EDGE('',*,*,#228919,.T.); +#228919 = EDGE_CURVE('',#228912,#228920,#228922,.T.); +#228920 = VERTEX_POINT('',#228921); +#228921 = CARTESIAN_POINT('',(173.599983,-58.07607,1.585)); +#228922 = LINE('',#228923,#228924); +#228923 = CARTESIAN_POINT('',(174.015881,-57.992891,1.585)); +#228924 = VECTOR('',#228925,1.); +#228925 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#228926 = ORIENTED_EDGE('',*,*,#228927,.T.); +#228927 = EDGE_CURVE('',#228920,#228928,#228930,.T.); +#228928 = VERTEX_POINT('',#228929); +#228929 = CARTESIAN_POINT('',(173.599983,-58.187356,1.585)); +#228930 = LINE('',#228931,#228932); +#228931 = CARTESIAN_POINT('',(173.599983,-58.07607,1.585)); +#228932 = VECTOR('',#228933,1.); +#228933 = DIRECTION('',(0.,-1.,0.)); +#228934 = ORIENTED_EDGE('',*,*,#228935,.T.); +#228935 = EDGE_CURVE('',#228928,#228936,#228938,.T.); +#228936 = VERTEX_POINT('',#228937); +#228937 = CARTESIAN_POINT('',(173.628503,-58.244398,1.585)); +#228938 = LINE('',#228939,#228940); +#228939 = CARTESIAN_POINT('',(173.599983,-58.187356,1.585)); +#228940 = VECTOR('',#228941,1.); +#228941 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#228942 = ORIENTED_EDGE('',*,*,#228943,.T.); +#228943 = EDGE_CURVE('',#228936,#228944,#228946,.T.); +#228944 = VERTEX_POINT('',#228945); +#228945 = CARTESIAN_POINT('',(173.685545,-58.272919,1.585)); +#228946 = LINE('',#228947,#228948); +#228947 = CARTESIAN_POINT('',(173.628503,-58.244398,1.585)); +#228948 = VECTOR('',#228949,1.); +#228949 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#228950 = ORIENTED_EDGE('',*,*,#228951,.T.); +#228951 = EDGE_CURVE('',#228944,#228952,#228954,.T.); +#228952 = VERTEX_POINT('',#228953); +#228953 = CARTESIAN_POINT('',(173.840611,-58.272919,1.585)); +#228954 = LINE('',#228955,#228956); +#228955 = CARTESIAN_POINT('',(173.685545,-58.272919,1.585)); +#228956 = VECTOR('',#228957,1.); +#228957 = DIRECTION('',(1.,0.,0.)); +#228958 = ORIENTED_EDGE('',*,*,#228959,.T.); +#228959 = EDGE_CURVE('',#228952,#228960,#228962,.T.); +#228960 = VERTEX_POINT('',#228961); +#228961 = CARTESIAN_POINT('',(173.933744,-58.227963,1.585)); +#228962 = LINE('',#228963,#228964); +#228963 = CARTESIAN_POINT('',(173.840611,-58.272919,1.585)); +#228964 = VECTOR('',#228965,1.); +#228965 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#228966 = ORIENTED_EDGE('',*,*,#228967,.T.); +#228967 = EDGE_CURVE('',#228960,#228968,#228970,.T.); +#228968 = VERTEX_POINT('',#228969); +#228969 = CARTESIAN_POINT('',(173.987095,-58.367382,1.585)); +#228970 = CIRCLE('',#228971,7.500029440469E-02); +#228971 = AXIS2_PLACEMENT_3D('',#228972,#228973,#228974); +#228972 = CARTESIAN_POINT('',(173.95355335132,-58.30029994603,1.585)); +#228973 = DIRECTION('',(0.,0.,-1.)); +#228974 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#228975 = ORIENTED_EDGE('',*,*,#228976,.T.); +#228976 = EDGE_CURVE('',#228968,#228977,#228979,.T.); +#228977 = VERTEX_POINT('',#228978); +#228978 = CARTESIAN_POINT('',(173.872948,-58.421478,1.585)); +#228979 = LINE('',#228980,#228981); +#228980 = CARTESIAN_POINT('',(173.987095,-58.367382,1.585)); +#228981 = VECTOR('',#228982,1.); +#228982 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#228983 = ORIENTED_EDGE('',*,*,#228984,.T.); +#228984 = EDGE_CURVE('',#228977,#228985,#228987,.T.); +#228985 = VERTEX_POINT('',#228986); +#228986 = CARTESIAN_POINT('',(173.64803,-58.420256,1.585)); +#228987 = LINE('',#228988,#228989); +#228988 = CARTESIAN_POINT('',(173.872948,-58.421478,1.585)); +#228989 = VECTOR('',#228990,1.); +#228990 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#228991 = ORIENTED_EDGE('',*,*,#228992,.T.); +#228992 = EDGE_CURVE('',#228985,#228993,#228995,.T.); +#228993 = VERTEX_POINT('',#228994); +#228994 = CARTESIAN_POINT('',(173.526618,-58.35955,1.585)); +#228995 = LINE('',#228996,#228997); +#228996 = CARTESIAN_POINT('',(173.64803,-58.420256,1.585)); +#228997 = VECTOR('',#228998,1.); +#228998 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#228999 = ORIENTED_EDGE('',*,*,#229000,.T.); +#229000 = EDGE_CURVE('',#228993,#229001,#229003,.T.); +#229001 = VERTEX_POINT('',#229002); +#229002 = CARTESIAN_POINT('',(173.50552,-58.333841,1.585)); +#229003 = LINE('',#229004,#229005); +#229004 = CARTESIAN_POINT('',(173.526618,-58.35955,1.585)); +#229005 = VECTOR('',#229006,1.); +#229006 = DIRECTION('',(-0.634378352792,0.773022706982,0.)); +#229007 = ORIENTED_EDGE('',*,*,#229008,.T.); +#229008 = EDGE_CURVE('',#229001,#229009,#229011,.T.); +#229009 = VERTEX_POINT('',#229010); +#229010 = CARTESIAN_POINT('',(173.451424,-58.219693,1.585)); +#229011 = LINE('',#229012,#229013); +#229012 = CARTESIAN_POINT('',(173.50552,-58.333841,1.585)); +#229013 = VECTOR('',#229014,1.); +#229014 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#229015 = ORIENTED_EDGE('',*,*,#229016,.T.); +#229016 = EDGE_CURVE('',#229009,#229017,#229019,.T.); +#229017 = VERTEX_POINT('',#229018); +#229018 = CARTESIAN_POINT('',(173.452646,-57.8043,1.585)); +#229019 = LINE('',#229020,#229021); +#229020 = CARTESIAN_POINT('',(173.451424,-58.219693,1.585)); +#229021 = VECTOR('',#229022,1.); +#229022 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#229023 = ORIENTED_EDGE('',*,*,#229024,.T.); +#229024 = EDGE_CURVE('',#229017,#229025,#229027,.T.); +#229025 = VERTEX_POINT('',#229026); +#229026 = CARTESIAN_POINT('',(173.513352,-57.682887,1.585)); +#229027 = LINE('',#229028,#229029); +#229028 = CARTESIAN_POINT('',(173.452646,-57.8043,1.585)); +#229029 = VECTOR('',#229030,1.); +#229030 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#229031 = ORIENTED_EDGE('',*,*,#229032,.T.); +#229032 = EDGE_CURVE('',#229025,#228869,#229033,.T.); +#229033 = LINE('',#229034,#229035); +#229034 = CARTESIAN_POINT('',(173.513352,-57.682887,1.585)); +#229035 = VECTOR('',#229036,1.); +#229036 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#229037 = FACE_BOUND('',#229038,.F.); +#229038 = EDGE_LOOP('',(#229039,#229050,#229058,#229066,#229074,#229082) + ); +#229039 = ORIENTED_EDGE('',*,*,#229040,.T.); +#229040 = EDGE_CURVE('',#229041,#229043,#229045,.T.); +#229041 = VERTEX_POINT('',#229042); +#229042 = CARTESIAN_POINT('',(173.897652,-57.784772,1.585)); +#229043 = VERTEX_POINT('',#229044); +#229044 = CARTESIAN_POINT('',(173.628503,-57.784772,1.585)); +#229045 = CIRCLE('',#229046,0.239283669194); +#229046 = AXIS2_PLACEMENT_3D('',#229047,#229048,#229049); +#229047 = CARTESIAN_POINT('',(173.7630775,-57.98262643713,1.585)); +#229048 = DIRECTION('',(0.,0.,1.)); +#229049 = DIRECTION('',(0.562405702208,0.82686143103,-0.)); +#229050 = ORIENTED_EDGE('',*,*,#229051,.T.); +#229051 = EDGE_CURVE('',#229043,#229052,#229054,.T.); +#229052 = VERTEX_POINT('',#229053); +#229053 = CARTESIAN_POINT('',(173.599983,-57.841814,1.585)); +#229054 = LINE('',#229055,#229056); +#229055 = CARTESIAN_POINT('',(173.628503,-57.784772,1.585)); +#229056 = VECTOR('',#229057,1.); +#229057 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#229058 = ORIENTED_EDGE('',*,*,#229059,.T.); +#229059 = EDGE_CURVE('',#229052,#229060,#229062,.T.); +#229060 = VERTEX_POINT('',#229061); +#229061 = CARTESIAN_POINT('',(173.599983,-57.923099,1.585)); +#229062 = LINE('',#229063,#229064); +#229063 = CARTESIAN_POINT('',(173.599983,-57.841814,1.585)); +#229064 = VECTOR('',#229065,1.); +#229065 = DIRECTION('',(0.,-1.,0.)); +#229066 = ORIENTED_EDGE('',*,*,#229067,.T.); +#229067 = EDGE_CURVE('',#229060,#229068,#229070,.T.); +#229068 = VERTEX_POINT('',#229069); +#229069 = CARTESIAN_POINT('',(173.926173,-57.857862,1.585)); +#229070 = LINE('',#229071,#229072); +#229071 = CARTESIAN_POINT('',(173.599983,-57.923099,1.585)); +#229072 = VECTOR('',#229073,1.); +#229073 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#229074 = ORIENTED_EDGE('',*,*,#229075,.T.); +#229075 = EDGE_CURVE('',#229068,#229076,#229078,.T.); +#229076 = VERTEX_POINT('',#229077); +#229077 = CARTESIAN_POINT('',(173.926173,-57.841814,1.585)); +#229078 = LINE('',#229079,#229080); +#229079 = CARTESIAN_POINT('',(173.926173,-57.857862,1.585)); +#229080 = VECTOR('',#229081,1.); +#229081 = DIRECTION('',(0.,1.,0.)); +#229082 = ORIENTED_EDGE('',*,*,#229083,.T.); +#229083 = EDGE_CURVE('',#229076,#229041,#229084,.T.); +#229084 = LINE('',#229085,#229086); +#229085 = CARTESIAN_POINT('',(173.926173,-57.841814,1.585)); +#229086 = VECTOR('',#229087,1.); +#229087 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229088 = PLANE('',#229089); +#229089 = AXIS2_PLACEMENT_3D('',#229090,#229091,#229092); +#229090 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229091 = DIRECTION('',(0.,0.,1.)); +#229092 = DIRECTION('',(1.,0.,-0.)); +#229093 = SHELL_BASED_SURFACE_MODEL('',(#229094)); +#229094 = OPEN_SHELL('',(#229095)); +#229095 = ADVANCED_FACE('',(#229096),#229254,.T.); +#229096 = FACE_BOUND('',#229097,.F.); +#229097 = EDGE_LOOP('',(#229098,#229109,#229117,#229125,#229133,#229141, + #229150,#229158,#229167,#229175,#229183,#229191,#229199,#229207, + #229215,#229223,#229232,#229240,#229248)); +#229098 = ORIENTED_EDGE('',*,*,#229099,.T.); +#229099 = EDGE_CURVE('',#229100,#229102,#229104,.T.); +#229100 = VERTEX_POINT('',#229101); +#229101 = CARTESIAN_POINT('',(174.388077,-57.618892,1.585)); +#229102 = VERTEX_POINT('',#229103); +#229103 = CARTESIAN_POINT('',(174.490814,-57.638293,1.585)); +#229104 = CIRCLE('',#229105,7.44076017233E-02); +#229105 = AXIS2_PLACEMENT_3D('',#229106,#229107,#229108); +#229106 = CARTESIAN_POINT('',(174.42962006572,-57.68062258305,1.585)); +#229107 = DIRECTION('',(0.,0.,-1.)); +#229108 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#229109 = ORIENTED_EDGE('',*,*,#229110,.T.); +#229110 = EDGE_CURVE('',#229102,#229111,#229113,.T.); +#229111 = VERTEX_POINT('',#229112); +#229112 = CARTESIAN_POINT('',(174.55797,-57.607693,1.585)); +#229113 = LINE('',#229114,#229115); +#229114 = CARTESIAN_POINT('',(174.490814,-57.638293,1.585)); +#229115 = VECTOR('',#229116,1.); +#229116 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#229117 = ORIENTED_EDGE('',*,*,#229118,.T.); +#229118 = EDGE_CURVE('',#229111,#229119,#229121,.T.); +#229119 = VERTEX_POINT('',#229120); +#229120 = CARTESIAN_POINT('',(174.730091,-57.607693,1.585)); +#229121 = LINE('',#229122,#229123); +#229122 = CARTESIAN_POINT('',(174.55797,-57.607693,1.585)); +#229123 = VECTOR('',#229124,1.); +#229124 = DIRECTION('',(1.,0.,0.)); +#229125 = ORIENTED_EDGE('',*,*,#229126,.T.); +#229126 = EDGE_CURVE('',#229119,#229127,#229129,.T.); +#229127 = VERTEX_POINT('',#229128); +#229128 = CARTESIAN_POINT('',(174.856681,-57.669621,1.585)); +#229129 = LINE('',#229130,#229131); +#229130 = CARTESIAN_POINT('',(174.730091,-57.607693,1.585)); +#229131 = VECTOR('',#229132,1.); +#229132 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#229133 = ORIENTED_EDGE('',*,*,#229134,.T.); +#229134 = EDGE_CURVE('',#229127,#229135,#229137,.T.); +#229135 = VERTEX_POINT('',#229136); +#229136 = CARTESIAN_POINT('',(174.877779,-57.69533,1.585)); +#229137 = LINE('',#229138,#229139); +#229138 = CARTESIAN_POINT('',(174.856681,-57.669621,1.585)); +#229139 = VECTOR('',#229140,1.); +#229140 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#229141 = ORIENTED_EDGE('',*,*,#229142,.T.); +#229142 = EDGE_CURVE('',#229135,#229143,#229145,.T.); +#229143 = VERTEX_POINT('',#229144); +#229144 = CARTESIAN_POINT('',(174.920676,-58.389587,1.585)); +#229145 = CIRCLE('',#229146,0.780466291445); +#229146 = AXIS2_PLACEMENT_3D('',#229147,#229148,#229149); +#229147 = CARTESIAN_POINT('',(174.2018662213,-58.08554730828,1.585)); +#229148 = DIRECTION('',(0.,0.,-1.)); +#229149 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#229150 = ORIENTED_EDGE('',*,*,#229151,.T.); +#229151 = EDGE_CURVE('',#229143,#229152,#229154,.T.); +#229152 = VERTEX_POINT('',#229153); +#229153 = CARTESIAN_POINT('',(174.899984,-58.410279,1.585)); +#229154 = LINE('',#229155,#229156); +#229155 = CARTESIAN_POINT('',(174.920676,-58.389587,1.585)); +#229156 = VECTOR('',#229157,1.); +#229157 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229158 = ORIENTED_EDGE('',*,*,#229159,.T.); +#229159 = EDGE_CURVE('',#229152,#229160,#229162,.T.); +#229160 = VERTEX_POINT('',#229161); +#229161 = CARTESIAN_POINT('',(174.783316,-58.347919,1.585)); +#229162 = CIRCLE('',#229163,7.499979580328E-02); +#229163 = AXIS2_PLACEMENT_3D('',#229164,#229165,#229166); +#229164 = CARTESIAN_POINT('',(174.8583157958,-58.34791931647,1.585)); +#229165 = DIRECTION('',(-0.,0.,-1.)); +#229166 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#229167 = ORIENTED_EDGE('',*,*,#229168,.T.); +#229168 = EDGE_CURVE('',#229160,#229169,#229171,.T.); +#229169 = VERTEX_POINT('',#229170); +#229170 = CARTESIAN_POINT('',(174.783316,-57.841814,1.585)); +#229171 = LINE('',#229172,#229173); +#229172 = CARTESIAN_POINT('',(174.783316,-58.347919,1.585)); +#229173 = VECTOR('',#229174,1.); +#229174 = DIRECTION('',(0.,1.,0.)); +#229175 = ORIENTED_EDGE('',*,*,#229176,.T.); +#229176 = EDGE_CURVE('',#229169,#229177,#229179,.T.); +#229177 = VERTEX_POINT('',#229178); +#229178 = CARTESIAN_POINT('',(174.754795,-57.784772,1.585)); +#229179 = LINE('',#229180,#229181); +#229180 = CARTESIAN_POINT('',(174.783316,-57.841814,1.585)); +#229181 = VECTOR('',#229182,1.); +#229182 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229183 = ORIENTED_EDGE('',*,*,#229184,.T.); +#229184 = EDGE_CURVE('',#229177,#229185,#229187,.T.); +#229185 = VERTEX_POINT('',#229186); +#229186 = CARTESIAN_POINT('',(174.697754,-57.756252,1.585)); +#229187 = LINE('',#229188,#229189); +#229188 = CARTESIAN_POINT('',(174.754795,-57.784772,1.585)); +#229189 = VECTOR('',#229190,1.); +#229190 = DIRECTION('',(-0.894430327074,0.447207323296,0.)); +#229191 = ORIENTED_EDGE('',*,*,#229192,.T.); +#229192 = EDGE_CURVE('',#229185,#229193,#229195,.T.); +#229193 = VERTEX_POINT('',#229194); +#229194 = CARTESIAN_POINT('',(174.590307,-57.756252,1.585)); +#229195 = LINE('',#229196,#229197); +#229196 = CARTESIAN_POINT('',(174.697754,-57.756252,1.585)); +#229197 = VECTOR('',#229198,1.); +#229198 = DIRECTION('',(-1.,0.,0.)); +#229199 = ORIENTED_EDGE('',*,*,#229200,.T.); +#229200 = EDGE_CURVE('',#229193,#229201,#229203,.T.); +#229201 = VERTEX_POINT('',#229202); +#229202 = CARTESIAN_POINT('',(174.521791,-57.79051,1.585)); +#229203 = LINE('',#229204,#229205); +#229204 = CARTESIAN_POINT('',(174.590307,-57.756252,1.585)); +#229205 = VECTOR('',#229206,1.); +#229206 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#229207 = ORIENTED_EDGE('',*,*,#229208,.T.); +#229208 = EDGE_CURVE('',#229201,#229209,#229211,.T.); +#229209 = VERTEX_POINT('',#229210); +#229210 = CARTESIAN_POINT('',(174.504745,-57.807556,1.585)); +#229211 = LINE('',#229212,#229213); +#229212 = CARTESIAN_POINT('',(174.521791,-57.79051,1.585)); +#229213 = VECTOR('',#229214,1.); +#229214 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229215 = ORIENTED_EDGE('',*,*,#229216,.T.); +#229216 = EDGE_CURVE('',#229209,#229217,#229219,.T.); +#229217 = VERTEX_POINT('',#229218); +#229218 = CARTESIAN_POINT('',(174.503304,-58.362551,1.585)); +#229219 = LINE('',#229220,#229221); +#229220 = CARTESIAN_POINT('',(174.504745,-57.807556,1.585)); +#229221 = VECTOR('',#229222,1.); +#229222 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#229223 = ORIENTED_EDGE('',*,*,#229224,.T.); +#229224 = EDGE_CURVE('',#229217,#229225,#229227,.T.); +#229225 = VERTEX_POINT('',#229226); +#229226 = CARTESIAN_POINT('',(174.354745,-58.347919,1.585)); +#229227 = CIRCLE('',#229228,7.500006711464E-02); +#229228 = AXIS2_PLACEMENT_3D('',#229229,#229230,#229231); +#229229 = CARTESIAN_POINT('',(174.42974506711,-58.34791906711,1.585)); +#229230 = DIRECTION('',(-0.,0.,-1.)); +#229231 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#229232 = ORIENTED_EDGE('',*,*,#229233,.T.); +#229233 = EDGE_CURVE('',#229225,#229234,#229236,.T.); +#229234 = VERTEX_POINT('',#229235); +#229235 = CARTESIAN_POINT('',(174.356186,-57.66662,1.585)); +#229236 = LINE('',#229237,#229238); +#229237 = CARTESIAN_POINT('',(174.354745,-58.347919,1.585)); +#229238 = VECTOR('',#229239,1.); +#229239 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#229240 = ORIENTED_EDGE('',*,*,#229241,.T.); +#229241 = EDGE_CURVE('',#229234,#229242,#229244,.T.); +#229242 = VERTEX_POINT('',#229243); +#229243 = CARTESIAN_POINT('',(174.367385,-57.639584,1.585)); +#229244 = LINE('',#229245,#229246); +#229245 = CARTESIAN_POINT('',(174.356186,-57.66662,1.585)); +#229246 = VECTOR('',#229247,1.); +#229247 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229248 = ORIENTED_EDGE('',*,*,#229249,.T.); +#229249 = EDGE_CURVE('',#229242,#229100,#229250,.T.); +#229250 = LINE('',#229251,#229252); +#229251 = CARTESIAN_POINT('',(174.367385,-57.639584,1.585)); +#229252 = VECTOR('',#229253,1.); +#229253 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#229254 = PLANE('',#229255); +#229255 = AXIS2_PLACEMENT_3D('',#229256,#229257,#229258); +#229256 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229257 = DIRECTION('',(0.,0.,1.)); +#229258 = DIRECTION('',(1.,0.,-0.)); +#229259 = SHELL_BASED_SURFACE_MODEL('',(#229260)); +#229260 = OPEN_SHELL('',(#229261)); +#229261 = ADVANCED_FACE('',(#229262,#229434),#229485,.T.); +#229262 = FACE_BOUND('',#229263,.F.); +#229263 = EDGE_LOOP('',(#229264,#229275,#229283,#229291,#229299,#229307, + #229315,#229323,#229331,#229339,#229347,#229355,#229363,#229372, + #229380,#229388,#229396,#229404,#229412,#229420,#229428)); +#229264 = ORIENTED_EDGE('',*,*,#229265,.T.); +#229265 = EDGE_CURVE('',#229266,#229268,#229270,.T.); +#229266 = VERTEX_POINT('',#229267); +#229267 = CARTESIAN_POINT('',(177.539061,-57.661789,1.585)); +#229268 = VERTEX_POINT('',#229269); +#229269 = CARTESIAN_POINT('',(177.999538,-57.669621,1.585)); +#229270 = CIRCLE('',#229271,0.398777683503); +#229271 = AXIS2_PLACEMENT_3D('',#229272,#229273,#229274); +#229272 = CARTESIAN_POINT('',(177.76376278885,-57.99123208604,1.585)); +#229273 = DIRECTION('',(0.,0.,-1.)); +#229274 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#229275 = ORIENTED_EDGE('',*,*,#229276,.T.); +#229276 = EDGE_CURVE('',#229268,#229277,#229279,.T.); +#229277 = VERTEX_POINT('',#229278); +#229278 = CARTESIAN_POINT('',(178.020636,-57.69533,1.585)); +#229279 = LINE('',#229280,#229281); +#229280 = CARTESIAN_POINT('',(177.999538,-57.669621,1.585)); +#229281 = VECTOR('',#229282,1.); +#229282 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#229283 = ORIENTED_EDGE('',*,*,#229284,.T.); +#229284 = EDGE_CURVE('',#229277,#229285,#229287,.T.); +#229285 = VERTEX_POINT('',#229286); +#229286 = CARTESIAN_POINT('',(178.074732,-57.809477,1.585)); +#229287 = LINE('',#229288,#229289); +#229288 = CARTESIAN_POINT('',(178.020636,-57.69533,1.585)); +#229289 = VECTOR('',#229290,1.); +#229290 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#229291 = ORIENTED_EDGE('',*,*,#229292,.T.); +#229292 = EDGE_CURVE('',#229285,#229293,#229295,.T.); +#229293 = VERTEX_POINT('',#229294); +#229294 = CARTESIAN_POINT('',(178.074732,-57.933979,1.585)); +#229295 = LINE('',#229296,#229297); +#229296 = CARTESIAN_POINT('',(178.074732,-57.809477,1.585)); +#229297 = VECTOR('',#229298,1.); +#229298 = DIRECTION('',(0.,-1.,0.)); +#229299 = ORIENTED_EDGE('',*,*,#229300,.T.); +#229300 = EDGE_CURVE('',#229293,#229301,#229303,.T.); +#229301 = VERTEX_POINT('',#229302); +#229302 = CARTESIAN_POINT('',(178.054261,-57.972324,1.585)); +#229303 = LINE('',#229304,#229305); +#229304 = CARTESIAN_POINT('',(178.074732,-57.933979,1.585)); +#229305 = VECTOR('',#229306,1.); +#229306 = DIRECTION('',(-0.470952387879,-0.882158629925,0.)); +#229307 = ORIENTED_EDGE('',*,*,#229308,.T.); +#229308 = EDGE_CURVE('',#229301,#229309,#229311,.T.); +#229309 = VERTEX_POINT('',#229310); +#229310 = CARTESIAN_POINT('',(178.015881,-57.992891,1.585)); +#229311 = LINE('',#229312,#229313); +#229312 = CARTESIAN_POINT('',(178.054261,-57.972324,1.585)); +#229313 = VECTOR('',#229314,1.); +#229314 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#229315 = ORIENTED_EDGE('',*,*,#229316,.T.); +#229316 = EDGE_CURVE('',#229309,#229317,#229319,.T.); +#229317 = VERTEX_POINT('',#229318); +#229318 = CARTESIAN_POINT('',(177.599983,-58.07607,1.585)); +#229319 = LINE('',#229320,#229321); +#229320 = CARTESIAN_POINT('',(178.015881,-57.992891,1.585)); +#229321 = VECTOR('',#229322,1.); +#229322 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#229323 = ORIENTED_EDGE('',*,*,#229324,.T.); +#229324 = EDGE_CURVE('',#229317,#229325,#229327,.T.); +#229325 = VERTEX_POINT('',#229326); +#229326 = CARTESIAN_POINT('',(177.599983,-58.187356,1.585)); +#229327 = LINE('',#229328,#229329); +#229328 = CARTESIAN_POINT('',(177.599983,-58.07607,1.585)); +#229329 = VECTOR('',#229330,1.); +#229330 = DIRECTION('',(0.,-1.,0.)); +#229331 = ORIENTED_EDGE('',*,*,#229332,.T.); +#229332 = EDGE_CURVE('',#229325,#229333,#229335,.T.); +#229333 = VERTEX_POINT('',#229334); +#229334 = CARTESIAN_POINT('',(177.628503,-58.244398,1.585)); +#229335 = LINE('',#229336,#229337); +#229336 = CARTESIAN_POINT('',(177.599983,-58.187356,1.585)); +#229337 = VECTOR('',#229338,1.); +#229338 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#229339 = ORIENTED_EDGE('',*,*,#229340,.T.); +#229340 = EDGE_CURVE('',#229333,#229341,#229343,.T.); +#229341 = VERTEX_POINT('',#229342); +#229342 = CARTESIAN_POINT('',(177.685545,-58.272919,1.585)); +#229343 = LINE('',#229344,#229345); +#229344 = CARTESIAN_POINT('',(177.628503,-58.244398,1.585)); +#229345 = VECTOR('',#229346,1.); +#229346 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#229347 = ORIENTED_EDGE('',*,*,#229348,.T.); +#229348 = EDGE_CURVE('',#229341,#229349,#229351,.T.); +#229349 = VERTEX_POINT('',#229350); +#229350 = CARTESIAN_POINT('',(177.840611,-58.272919,1.585)); +#229351 = LINE('',#229352,#229353); +#229352 = CARTESIAN_POINT('',(177.685545,-58.272919,1.585)); +#229353 = VECTOR('',#229354,1.); +#229354 = DIRECTION('',(1.,0.,0.)); +#229355 = ORIENTED_EDGE('',*,*,#229356,.T.); +#229356 = EDGE_CURVE('',#229349,#229357,#229359,.T.); +#229357 = VERTEX_POINT('',#229358); +#229358 = CARTESIAN_POINT('',(177.933744,-58.227963,1.585)); +#229359 = LINE('',#229360,#229361); +#229360 = CARTESIAN_POINT('',(177.840611,-58.272919,1.585)); +#229361 = VECTOR('',#229362,1.); +#229362 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#229363 = ORIENTED_EDGE('',*,*,#229364,.T.); +#229364 = EDGE_CURVE('',#229357,#229365,#229367,.T.); +#229365 = VERTEX_POINT('',#229366); +#229366 = CARTESIAN_POINT('',(177.987095,-58.367382,1.585)); +#229367 = CIRCLE('',#229368,7.500029440469E-02); +#229368 = AXIS2_PLACEMENT_3D('',#229369,#229370,#229371); +#229369 = CARTESIAN_POINT('',(177.95355335132,-58.30029994603,1.585)); +#229370 = DIRECTION('',(0.,0.,-1.)); +#229371 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#229372 = ORIENTED_EDGE('',*,*,#229373,.T.); +#229373 = EDGE_CURVE('',#229365,#229374,#229376,.T.); +#229374 = VERTEX_POINT('',#229375); +#229375 = CARTESIAN_POINT('',(177.872948,-58.421478,1.585)); +#229376 = LINE('',#229377,#229378); +#229377 = CARTESIAN_POINT('',(177.987095,-58.367382,1.585)); +#229378 = VECTOR('',#229379,1.); +#229379 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#229380 = ORIENTED_EDGE('',*,*,#229381,.T.); +#229381 = EDGE_CURVE('',#229374,#229382,#229384,.T.); +#229382 = VERTEX_POINT('',#229383); +#229383 = CARTESIAN_POINT('',(177.64803,-58.420256,1.585)); +#229384 = LINE('',#229385,#229386); +#229385 = CARTESIAN_POINT('',(177.872948,-58.421478,1.585)); +#229386 = VECTOR('',#229387,1.); +#229387 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#229388 = ORIENTED_EDGE('',*,*,#229389,.T.); +#229389 = EDGE_CURVE('',#229382,#229390,#229392,.T.); +#229390 = VERTEX_POINT('',#229391); +#229391 = CARTESIAN_POINT('',(177.526618,-58.35955,1.585)); +#229392 = LINE('',#229393,#229394); +#229393 = CARTESIAN_POINT('',(177.64803,-58.420256,1.585)); +#229394 = VECTOR('',#229395,1.); +#229395 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#229396 = ORIENTED_EDGE('',*,*,#229397,.T.); +#229397 = EDGE_CURVE('',#229390,#229398,#229400,.T.); +#229398 = VERTEX_POINT('',#229399); +#229399 = CARTESIAN_POINT('',(177.50552,-58.333841,1.585)); +#229400 = LINE('',#229401,#229402); +#229401 = CARTESIAN_POINT('',(177.526618,-58.35955,1.585)); +#229402 = VECTOR('',#229403,1.); +#229403 = DIRECTION('',(-0.634378352792,0.773022706982,0.)); +#229404 = ORIENTED_EDGE('',*,*,#229405,.T.); +#229405 = EDGE_CURVE('',#229398,#229406,#229408,.T.); +#229406 = VERTEX_POINT('',#229407); +#229407 = CARTESIAN_POINT('',(177.451424,-58.219693,1.585)); +#229408 = LINE('',#229409,#229410); +#229409 = CARTESIAN_POINT('',(177.50552,-58.333841,1.585)); +#229410 = VECTOR('',#229411,1.); +#229411 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#229412 = ORIENTED_EDGE('',*,*,#229413,.T.); +#229413 = EDGE_CURVE('',#229406,#229414,#229416,.T.); +#229414 = VERTEX_POINT('',#229415); +#229415 = CARTESIAN_POINT('',(177.452646,-57.8043,1.585)); +#229416 = LINE('',#229417,#229418); +#229417 = CARTESIAN_POINT('',(177.451424,-58.219693,1.585)); +#229418 = VECTOR('',#229419,1.); +#229419 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#229420 = ORIENTED_EDGE('',*,*,#229421,.T.); +#229421 = EDGE_CURVE('',#229414,#229422,#229424,.T.); +#229422 = VERTEX_POINT('',#229423); +#229423 = CARTESIAN_POINT('',(177.513352,-57.682887,1.585)); +#229424 = LINE('',#229425,#229426); +#229425 = CARTESIAN_POINT('',(177.452646,-57.8043,1.585)); +#229426 = VECTOR('',#229427,1.); +#229427 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#229428 = ORIENTED_EDGE('',*,*,#229429,.T.); +#229429 = EDGE_CURVE('',#229422,#229266,#229430,.T.); +#229430 = LINE('',#229431,#229432); +#229431 = CARTESIAN_POINT('',(177.513352,-57.682887,1.585)); +#229432 = VECTOR('',#229433,1.); +#229433 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#229434 = FACE_BOUND('',#229435,.F.); +#229435 = EDGE_LOOP('',(#229436,#229447,#229455,#229463,#229471,#229479) + ); +#229436 = ORIENTED_EDGE('',*,*,#229437,.T.); +#229437 = EDGE_CURVE('',#229438,#229440,#229442,.T.); +#229438 = VERTEX_POINT('',#229439); +#229439 = CARTESIAN_POINT('',(177.897652,-57.784772,1.585)); +#229440 = VERTEX_POINT('',#229441); +#229441 = CARTESIAN_POINT('',(177.628503,-57.784772,1.585)); +#229442 = CIRCLE('',#229443,0.239283669194); +#229443 = AXIS2_PLACEMENT_3D('',#229444,#229445,#229446); +#229444 = CARTESIAN_POINT('',(177.7630775,-57.98262643713,1.585)); +#229445 = DIRECTION('',(0.,0.,1.)); +#229446 = DIRECTION('',(0.562405702208,0.82686143103,-0.)); +#229447 = ORIENTED_EDGE('',*,*,#229448,.T.); +#229448 = EDGE_CURVE('',#229440,#229449,#229451,.T.); +#229449 = VERTEX_POINT('',#229450); +#229450 = CARTESIAN_POINT('',(177.599983,-57.841814,1.585)); +#229451 = LINE('',#229452,#229453); +#229452 = CARTESIAN_POINT('',(177.628503,-57.784772,1.585)); +#229453 = VECTOR('',#229454,1.); +#229454 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#229455 = ORIENTED_EDGE('',*,*,#229456,.T.); +#229456 = EDGE_CURVE('',#229449,#229457,#229459,.T.); +#229457 = VERTEX_POINT('',#229458); +#229458 = CARTESIAN_POINT('',(177.599983,-57.923099,1.585)); +#229459 = LINE('',#229460,#229461); +#229460 = CARTESIAN_POINT('',(177.599983,-57.841814,1.585)); +#229461 = VECTOR('',#229462,1.); +#229462 = DIRECTION('',(0.,-1.,0.)); +#229463 = ORIENTED_EDGE('',*,*,#229464,.T.); +#229464 = EDGE_CURVE('',#229457,#229465,#229467,.T.); +#229465 = VERTEX_POINT('',#229466); +#229466 = CARTESIAN_POINT('',(177.926173,-57.857862,1.585)); +#229467 = LINE('',#229468,#229469); +#229468 = CARTESIAN_POINT('',(177.599983,-57.923099,1.585)); +#229469 = VECTOR('',#229470,1.); +#229470 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#229471 = ORIENTED_EDGE('',*,*,#229472,.T.); +#229472 = EDGE_CURVE('',#229465,#229473,#229475,.T.); +#229473 = VERTEX_POINT('',#229474); +#229474 = CARTESIAN_POINT('',(177.926173,-57.841814,1.585)); +#229475 = LINE('',#229476,#229477); +#229476 = CARTESIAN_POINT('',(177.926173,-57.857862,1.585)); +#229477 = VECTOR('',#229478,1.); +#229478 = DIRECTION('',(0.,1.,0.)); +#229479 = ORIENTED_EDGE('',*,*,#229480,.T.); +#229480 = EDGE_CURVE('',#229473,#229438,#229481,.T.); +#229481 = LINE('',#229482,#229483); +#229482 = CARTESIAN_POINT('',(177.926173,-57.841814,1.585)); +#229483 = VECTOR('',#229484,1.); +#229484 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229485 = PLANE('',#229486); +#229486 = AXIS2_PLACEMENT_3D('',#229487,#229488,#229489); +#229487 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229488 = DIRECTION('',(0.,0.,1.)); +#229489 = DIRECTION('',(1.,0.,-0.)); +#229490 = SHELL_BASED_SURFACE_MODEL('',(#229491)); +#229491 = OPEN_SHELL('',(#229492)); +#229492 = ADVANCED_FACE('',(#229493),#229651,.T.); +#229493 = FACE_BOUND('',#229494,.F.); +#229494 = EDGE_LOOP('',(#229495,#229506,#229514,#229522,#229530,#229538, + #229547,#229555,#229564,#229572,#229580,#229588,#229596,#229604, + #229612,#229620,#229629,#229637,#229645)); +#229495 = ORIENTED_EDGE('',*,*,#229496,.T.); +#229496 = EDGE_CURVE('',#229497,#229499,#229501,.T.); +#229497 = VERTEX_POINT('',#229498); +#229498 = CARTESIAN_POINT('',(178.388077,-57.618892,1.585)); +#229499 = VERTEX_POINT('',#229500); +#229500 = CARTESIAN_POINT('',(178.490814,-57.638293,1.585)); +#229501 = CIRCLE('',#229502,7.44076017233E-02); +#229502 = AXIS2_PLACEMENT_3D('',#229503,#229504,#229505); +#229503 = CARTESIAN_POINT('',(178.42962006572,-57.68062258305,1.585)); +#229504 = DIRECTION('',(0.,0.,-1.)); +#229505 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#229506 = ORIENTED_EDGE('',*,*,#229507,.T.); +#229507 = EDGE_CURVE('',#229499,#229508,#229510,.T.); +#229508 = VERTEX_POINT('',#229509); +#229509 = CARTESIAN_POINT('',(178.55797,-57.607693,1.585)); +#229510 = LINE('',#229511,#229512); +#229511 = CARTESIAN_POINT('',(178.490814,-57.638293,1.585)); +#229512 = VECTOR('',#229513,1.); +#229513 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#229514 = ORIENTED_EDGE('',*,*,#229515,.T.); +#229515 = EDGE_CURVE('',#229508,#229516,#229518,.T.); +#229516 = VERTEX_POINT('',#229517); +#229517 = CARTESIAN_POINT('',(178.730091,-57.607693,1.585)); +#229518 = LINE('',#229519,#229520); +#229519 = CARTESIAN_POINT('',(178.55797,-57.607693,1.585)); +#229520 = VECTOR('',#229521,1.); +#229521 = DIRECTION('',(1.,0.,0.)); +#229522 = ORIENTED_EDGE('',*,*,#229523,.T.); +#229523 = EDGE_CURVE('',#229516,#229524,#229526,.T.); +#229524 = VERTEX_POINT('',#229525); +#229525 = CARTESIAN_POINT('',(178.856681,-57.669621,1.585)); +#229526 = LINE('',#229527,#229528); +#229527 = CARTESIAN_POINT('',(178.730091,-57.607693,1.585)); +#229528 = VECTOR('',#229529,1.); +#229529 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#229530 = ORIENTED_EDGE('',*,*,#229531,.T.); +#229531 = EDGE_CURVE('',#229524,#229532,#229534,.T.); +#229532 = VERTEX_POINT('',#229533); +#229533 = CARTESIAN_POINT('',(178.877779,-57.69533,1.585)); +#229534 = LINE('',#229535,#229536); +#229535 = CARTESIAN_POINT('',(178.856681,-57.669621,1.585)); +#229536 = VECTOR('',#229537,1.); +#229537 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#229538 = ORIENTED_EDGE('',*,*,#229539,.T.); +#229539 = EDGE_CURVE('',#229532,#229540,#229542,.T.); +#229540 = VERTEX_POINT('',#229541); +#229541 = CARTESIAN_POINT('',(178.920676,-58.389587,1.585)); +#229542 = CIRCLE('',#229543,0.780466291445); +#229543 = AXIS2_PLACEMENT_3D('',#229544,#229545,#229546); +#229544 = CARTESIAN_POINT('',(178.2018662213,-58.08554730828,1.585)); +#229545 = DIRECTION('',(0.,0.,-1.)); +#229546 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#229547 = ORIENTED_EDGE('',*,*,#229548,.T.); +#229548 = EDGE_CURVE('',#229540,#229549,#229551,.T.); +#229549 = VERTEX_POINT('',#229550); +#229550 = CARTESIAN_POINT('',(178.899984,-58.410279,1.585)); +#229551 = LINE('',#229552,#229553); +#229552 = CARTESIAN_POINT('',(178.920676,-58.389587,1.585)); +#229553 = VECTOR('',#229554,1.); +#229554 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229555 = ORIENTED_EDGE('',*,*,#229556,.T.); +#229556 = EDGE_CURVE('',#229549,#229557,#229559,.T.); +#229557 = VERTEX_POINT('',#229558); +#229558 = CARTESIAN_POINT('',(178.783316,-58.347919,1.585)); +#229559 = CIRCLE('',#229560,7.499979580328E-02); +#229560 = AXIS2_PLACEMENT_3D('',#229561,#229562,#229563); +#229561 = CARTESIAN_POINT('',(178.8583157958,-58.34791931647,1.585)); +#229562 = DIRECTION('',(-0.,0.,-1.)); +#229563 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#229564 = ORIENTED_EDGE('',*,*,#229565,.T.); +#229565 = EDGE_CURVE('',#229557,#229566,#229568,.T.); +#229566 = VERTEX_POINT('',#229567); +#229567 = CARTESIAN_POINT('',(178.783316,-57.841814,1.585)); +#229568 = LINE('',#229569,#229570); +#229569 = CARTESIAN_POINT('',(178.783316,-58.347919,1.585)); +#229570 = VECTOR('',#229571,1.); +#229571 = DIRECTION('',(0.,1.,0.)); +#229572 = ORIENTED_EDGE('',*,*,#229573,.T.); +#229573 = EDGE_CURVE('',#229566,#229574,#229576,.T.); +#229574 = VERTEX_POINT('',#229575); +#229575 = CARTESIAN_POINT('',(178.754795,-57.784772,1.585)); +#229576 = LINE('',#229577,#229578); +#229577 = CARTESIAN_POINT('',(178.783316,-57.841814,1.585)); +#229578 = VECTOR('',#229579,1.); +#229579 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229580 = ORIENTED_EDGE('',*,*,#229581,.T.); +#229581 = EDGE_CURVE('',#229574,#229582,#229584,.T.); +#229582 = VERTEX_POINT('',#229583); +#229583 = CARTESIAN_POINT('',(178.697754,-57.756252,1.585)); +#229584 = LINE('',#229585,#229586); +#229585 = CARTESIAN_POINT('',(178.754795,-57.784772,1.585)); +#229586 = VECTOR('',#229587,1.); +#229587 = DIRECTION('',(-0.894430327074,0.447207323296,0.)); +#229588 = ORIENTED_EDGE('',*,*,#229589,.T.); +#229589 = EDGE_CURVE('',#229582,#229590,#229592,.T.); +#229590 = VERTEX_POINT('',#229591); +#229591 = CARTESIAN_POINT('',(178.590307,-57.756252,1.585)); +#229592 = LINE('',#229593,#229594); +#229593 = CARTESIAN_POINT('',(178.697754,-57.756252,1.585)); +#229594 = VECTOR('',#229595,1.); +#229595 = DIRECTION('',(-1.,0.,0.)); +#229596 = ORIENTED_EDGE('',*,*,#229597,.T.); +#229597 = EDGE_CURVE('',#229590,#229598,#229600,.T.); +#229598 = VERTEX_POINT('',#229599); +#229599 = CARTESIAN_POINT('',(178.521791,-57.79051,1.585)); +#229600 = LINE('',#229601,#229602); +#229601 = CARTESIAN_POINT('',(178.590307,-57.756252,1.585)); +#229602 = VECTOR('',#229603,1.); +#229603 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#229604 = ORIENTED_EDGE('',*,*,#229605,.T.); +#229605 = EDGE_CURVE('',#229598,#229606,#229608,.T.); +#229606 = VERTEX_POINT('',#229607); +#229607 = CARTESIAN_POINT('',(178.504745,-57.807556,1.585)); +#229608 = LINE('',#229609,#229610); +#229609 = CARTESIAN_POINT('',(178.521791,-57.79051,1.585)); +#229610 = VECTOR('',#229611,1.); +#229611 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229612 = ORIENTED_EDGE('',*,*,#229613,.T.); +#229613 = EDGE_CURVE('',#229606,#229614,#229616,.T.); +#229614 = VERTEX_POINT('',#229615); +#229615 = CARTESIAN_POINT('',(178.503304,-58.362551,1.585)); +#229616 = LINE('',#229617,#229618); +#229617 = CARTESIAN_POINT('',(178.504745,-57.807556,1.585)); +#229618 = VECTOR('',#229619,1.); +#229619 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#229620 = ORIENTED_EDGE('',*,*,#229621,.T.); +#229621 = EDGE_CURVE('',#229614,#229622,#229624,.T.); +#229622 = VERTEX_POINT('',#229623); +#229623 = CARTESIAN_POINT('',(178.354745,-58.347919,1.585)); +#229624 = CIRCLE('',#229625,7.500006711464E-02); +#229625 = AXIS2_PLACEMENT_3D('',#229626,#229627,#229628); +#229626 = CARTESIAN_POINT('',(178.42974506711,-58.34791906711,1.585)); +#229627 = DIRECTION('',(-0.,0.,-1.)); +#229628 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#229629 = ORIENTED_EDGE('',*,*,#229630,.T.); +#229630 = EDGE_CURVE('',#229622,#229631,#229633,.T.); +#229631 = VERTEX_POINT('',#229632); +#229632 = CARTESIAN_POINT('',(178.356186,-57.66662,1.585)); +#229633 = LINE('',#229634,#229635); +#229634 = CARTESIAN_POINT('',(178.354745,-58.347919,1.585)); +#229635 = VECTOR('',#229636,1.); +#229636 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#229637 = ORIENTED_EDGE('',*,*,#229638,.T.); +#229638 = EDGE_CURVE('',#229631,#229639,#229641,.T.); +#229639 = VERTEX_POINT('',#229640); +#229640 = CARTESIAN_POINT('',(178.367385,-57.639584,1.585)); +#229641 = LINE('',#229642,#229643); +#229642 = CARTESIAN_POINT('',(178.356186,-57.66662,1.585)); +#229643 = VECTOR('',#229644,1.); +#229644 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229645 = ORIENTED_EDGE('',*,*,#229646,.T.); +#229646 = EDGE_CURVE('',#229639,#229497,#229647,.T.); +#229647 = LINE('',#229648,#229649); +#229648 = CARTESIAN_POINT('',(178.367385,-57.639584,1.585)); +#229649 = VECTOR('',#229650,1.); +#229650 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#229651 = PLANE('',#229652); +#229652 = AXIS2_PLACEMENT_3D('',#229653,#229654,#229655); +#229653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229654 = DIRECTION('',(0.,0.,1.)); +#229655 = DIRECTION('',(1.,0.,-0.)); +#229656 = SHELL_BASED_SURFACE_MODEL('',(#229657)); +#229657 = OPEN_SHELL('',(#229658)); +#229658 = ADVANCED_FACE('',(#229659,#229817),#229887,.T.); +#229659 = FACE_BOUND('',#229660,.F.); +#229660 = EDGE_LOOP('',(#229661,#229672,#229680,#229689,#229697,#229705, + #229713,#229722,#229730,#229738,#229747,#229755,#229763,#229771, + #229779,#229787,#229795,#229803,#229811)); +#229661 = ORIENTED_EDGE('',*,*,#229662,.T.); +#229662 = EDGE_CURVE('',#229663,#229665,#229667,.T.); +#229663 = VERTEX_POINT('',#229664); +#229664 = CARTESIAN_POINT('',(206.532818,-57.271886,1.585)); +#229665 = VERTEX_POINT('',#229666); +#229666 = CARTESIAN_POINT('',(207.048513,-57.277252,1.585)); +#229667 = CIRCLE('',#229668,0.45076336239); +#229668 = AXIS2_PLACEMENT_3D('',#229669,#229670,#229671); +#229669 = CARTESIAN_POINT('',(206.78681860196,-57.64427195982,1.585)); +#229670 = DIRECTION('',(0.,0.,-1.)); +#229671 = DIRECTION('',(-0.563489899928,0.826122952519,0.)); +#229672 = ORIENTED_EDGE('',*,*,#229673,.T.); +#229673 = EDGE_CURVE('',#229665,#229674,#229676,.T.); +#229674 = VERTEX_POINT('',#229675); +#229675 = CARTESIAN_POINT('',(207.111967,-57.342782,1.585)); +#229676 = LINE('',#229677,#229678); +#229677 = CARTESIAN_POINT('',(207.048513,-57.277252,1.585)); +#229678 = VECTOR('',#229679,1.); +#229679 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#229680 = ORIENTED_EDGE('',*,*,#229681,.T.); +#229681 = EDGE_CURVE('',#229674,#229682,#229684,.T.); +#229682 = VERTEX_POINT('',#229683); +#229683 = CARTESIAN_POINT('',(207.1066,-57.810859,1.585)); +#229684 = CIRCLE('',#229685,0.397465645887); +#229685 = AXIS2_PLACEMENT_3D('',#229686,#229687,#229688); +#229686 = CARTESIAN_POINT('',(206.78806059713,-57.57313733821,1.585)); +#229687 = DIRECTION('',(0.,0.,-1.)); +#229688 = DIRECTION('',(0.814929305758,0.579560373574,0.)); +#229689 = ORIENTED_EDGE('',*,*,#229690,.T.); +#229690 = EDGE_CURVE('',#229682,#229691,#229693,.T.); +#229691 = VERTEX_POINT('',#229692); +#229692 = CARTESIAN_POINT('',(207.041067,-57.874312,1.585)); +#229693 = LINE('',#229694,#229695); +#229694 = CARTESIAN_POINT('',(207.1066,-57.810859,1.585)); +#229695 = VECTOR('',#229696,1.); +#229696 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#229697 = ORIENTED_EDGE('',*,*,#229698,.T.); +#229698 = EDGE_CURVE('',#229691,#229699,#229701,.T.); +#229699 = VERTEX_POINT('',#229700); +#229700 = CARTESIAN_POINT('',(206.920624,-57.932372,1.585)); +#229701 = LINE('',#229702,#229703); +#229702 = CARTESIAN_POINT('',(207.041067,-57.874312,1.585)); +#229703 = VECTOR('',#229704,1.); +#229704 = DIRECTION('',(-0.900800079444,-0.434234057708,0.)); +#229705 = ORIENTED_EDGE('',*,*,#229706,.T.); +#229706 = EDGE_CURVE('',#229699,#229707,#229709,.T.); +#229707 = VERTEX_POINT('',#229708); +#229708 = CARTESIAN_POINT('',(206.50685,-57.931574,1.585)); +#229709 = LINE('',#229710,#229711); +#229710 = CARTESIAN_POINT('',(206.920624,-57.932372,1.585)); +#229711 = VECTOR('',#229712,1.); +#229712 = DIRECTION('',(-0.999998140277,1.928585449894E-03,0.)); +#229713 = ORIENTED_EDGE('',*,*,#229714,.T.); +#229714 = EDGE_CURVE('',#229707,#229715,#229717,.T.); +#229715 = VERTEX_POINT('',#229716); +#229716 = CARTESIAN_POINT('',(206.077006,-57.701878,1.585)); +#229717 = CIRCLE('',#229718,0.610108760528); +#229718 = AXIS2_PLACEMENT_3D('',#229719,#229720,#229721); +#229719 = CARTESIAN_POINT('',(206.55554088862,-57.3234112775,1.585)); +#229720 = DIRECTION('',(0.,0.,-1.)); +#229721 = DIRECTION('',(-7.980689965079E-02,-0.996810342426,-0.)); +#229722 = ORIENTED_EDGE('',*,*,#229723,.T.); +#229723 = EDGE_CURVE('',#229715,#229724,#229726,.T.); +#229724 = VERTEX_POINT('',#229725); +#229725 = CARTESIAN_POINT('',(206.02291,-57.587731,1.585)); +#229726 = LINE('',#229727,#229728); +#229727 = CARTESIAN_POINT('',(206.077006,-57.701878,1.585)); +#229728 = VECTOR('',#229729,1.); +#229729 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#229730 = ORIENTED_EDGE('',*,*,#229731,.T.); +#229731 = EDGE_CURVE('',#229724,#229732,#229734,.T.); +#229732 = VERTEX_POINT('',#229733); +#229733 = CARTESIAN_POINT('',(206.02291,-57.367991,1.585)); +#229734 = LINE('',#229735,#229736); +#229735 = CARTESIAN_POINT('',(206.02291,-57.587731,1.585)); +#229736 = VECTOR('',#229737,1.); +#229737 = DIRECTION('',(0.,1.,0.)); +#229738 = ORIENTED_EDGE('',*,*,#229739,.T.); +#229739 = EDGE_CURVE('',#229732,#229740,#229742,.T.); +#229740 = VERTEX_POINT('',#229741); +#229741 = CARTESIAN_POINT('',(206.171469,-57.382623,1.585)); +#229742 = CIRCLE('',#229743,7.500006711464E-02); +#229743 = AXIS2_PLACEMENT_3D('',#229744,#229745,#229746); +#229744 = CARTESIAN_POINT('',(206.09646893288,-57.38262293288,1.585)); +#229745 = DIRECTION('',(0.,0.,-1.)); +#229746 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#229747 = ORIENTED_EDGE('',*,*,#229748,.T.); +#229748 = EDGE_CURVE('',#229740,#229749,#229751,.T.); +#229749 = VERTEX_POINT('',#229750); +#229750 = CARTESIAN_POINT('',(206.171469,-57.555394,1.585)); +#229751 = LINE('',#229752,#229753); +#229752 = CARTESIAN_POINT('',(206.171469,-57.382623,1.585)); +#229753 = VECTOR('',#229754,1.); +#229754 = DIRECTION('',(0.,-1.,0.)); +#229755 = ORIENTED_EDGE('',*,*,#229756,.T.); +#229756 = EDGE_CURVE('',#229749,#229757,#229759,.T.); +#229757 = VERTEX_POINT('',#229758); +#229758 = CARTESIAN_POINT('',(206.205727,-57.62391,1.585)); +#229759 = LINE('',#229760,#229761); +#229760 = CARTESIAN_POINT('',(206.171469,-57.555394,1.585)); +#229761 = VECTOR('',#229762,1.); +#229762 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#229763 = ORIENTED_EDGE('',*,*,#229764,.T.); +#229764 = EDGE_CURVE('',#229757,#229765,#229767,.T.); +#229765 = VERTEX_POINT('',#229766); +#229766 = CARTESIAN_POINT('',(206.239487,-57.65767,1.585)); +#229767 = LINE('',#229768,#229769); +#229768 = CARTESIAN_POINT('',(206.205727,-57.62391,1.585)); +#229769 = VECTOR('',#229770,1.); +#229770 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#229771 = ORIENTED_EDGE('',*,*,#229772,.T.); +#229772 = EDGE_CURVE('',#229765,#229773,#229775,.T.); +#229773 = VERTEX_POINT('',#229774); +#229774 = CARTESIAN_POINT('',(206.365358,-57.741584,1.585)); +#229775 = LINE('',#229776,#229777); +#229776 = CARTESIAN_POINT('',(206.239487,-57.65767,1.585)); +#229777 = VECTOR('',#229778,1.); +#229778 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#229779 = ORIENTED_EDGE('',*,*,#229780,.T.); +#229780 = EDGE_CURVE('',#229773,#229781,#229783,.T.); +#229781 = VERTEX_POINT('',#229782); +#229782 = CARTESIAN_POINT('',(206.439454,-57.760108,1.585)); +#229783 = LINE('',#229784,#229785); +#229784 = CARTESIAN_POINT('',(206.365358,-57.741584,1.585)); +#229785 = VECTOR('',#229786,1.); +#229786 = DIRECTION('',(0.970142500145,-0.242535625036,0.)); +#229787 = ORIENTED_EDGE('',*,*,#229788,.T.); +#229788 = EDGE_CURVE('',#229781,#229789,#229791,.T.); +#229789 = VERTEX_POINT('',#229790); +#229790 = CARTESIAN_POINT('',(206.403862,-57.682969,1.585)); +#229791 = LINE('',#229792,#229793); +#229792 = CARTESIAN_POINT('',(206.439454,-57.760108,1.585)); +#229793 = VECTOR('',#229794,1.); +#229794 = DIRECTION('',(-0.418955163734,0.90800692221,0.)); +#229795 = ORIENTED_EDGE('',*,*,#229796,.T.); +#229796 = EDGE_CURVE('',#229789,#229797,#229799,.T.); +#229797 = VERTEX_POINT('',#229798); +#229798 = CARTESIAN_POINT('',(206.405084,-57.458052,1.585)); +#229799 = LINE('',#229800,#229801); +#229800 = CARTESIAN_POINT('',(206.403862,-57.682969,1.585)); +#229801 = VECTOR('',#229802,1.); +#229802 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#229803 = ORIENTED_EDGE('',*,*,#229804,.T.); +#229804 = EDGE_CURVE('',#229797,#229805,#229807,.T.); +#229805 = VERTEX_POINT('',#229806); +#229806 = CARTESIAN_POINT('',(206.467288,-57.335339,1.585)); +#229807 = LINE('',#229808,#229809); +#229808 = CARTESIAN_POINT('',(206.405084,-57.458052,1.585)); +#229809 = VECTOR('',#229810,1.); +#229810 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#229811 = ORIENTED_EDGE('',*,*,#229812,.T.); +#229812 = EDGE_CURVE('',#229805,#229663,#229813,.T.); +#229813 = LINE('',#229814,#229815); +#229814 = CARTESIAN_POINT('',(206.467288,-57.335339,1.585)); +#229815 = VECTOR('',#229816,1.); +#229816 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#229817 = FACE_BOUND('',#229818,.F.); +#229818 = EDGE_LOOP('',(#229819,#229830,#229838,#229847,#229855,#229864, + #229872,#229881)); +#229819 = ORIENTED_EDGE('',*,*,#229820,.T.); +#229820 = EDGE_CURVE('',#229821,#229823,#229825,.T.); +#229821 = VERTEX_POINT('',#229822); +#229822 = CARTESIAN_POINT('',(206.956803,-57.396643,1.585)); +#229823 = VERTEX_POINT('',#229824); +#229824 = CARTESIAN_POINT('',(206.617086,-57.396643,1.585)); +#229825 = CIRCLE('',#229826,0.305621483548); +#229826 = AXIS2_PLACEMENT_3D('',#229827,#229828,#229829); +#229827 = CARTESIAN_POINT('',(206.7869445,-57.650715,1.585)); +#229828 = DIRECTION('',(0.,0.,1.)); +#229829 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#229830 = ORIENTED_EDGE('',*,*,#229831,.T.); +#229831 = EDGE_CURVE('',#229823,#229832,#229834,.T.); +#229832 = VERTEX_POINT('',#229833); +#229833 = CARTESIAN_POINT('',(206.586679,-57.42705,1.585)); +#229834 = LINE('',#229835,#229836); +#229835 = CARTESIAN_POINT('',(206.617086,-57.396643,1.585)); +#229836 = VECTOR('',#229837,1.); +#229837 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229838 = ORIENTED_EDGE('',*,*,#229839,.T.); +#229839 = EDGE_CURVE('',#229832,#229840,#229842,.T.); +#229840 = VERTEX_POINT('',#229841); +#229841 = CARTESIAN_POINT('',(206.586679,-57.719148,1.585)); +#229842 = CIRCLE('',#229843,0.252889603602); +#229843 = AXIS2_PLACEMENT_3D('',#229844,#229845,#229846); +#229844 = CARTESIAN_POINT('',(206.793132,-57.573099,1.585)); +#229845 = DIRECTION('',(0.,0.,1.)); +#229846 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#229847 = ORIENTED_EDGE('',*,*,#229848,.T.); +#229848 = EDGE_CURVE('',#229840,#229849,#229851,.T.); +#229849 = VERTEX_POINT('',#229850); +#229850 = CARTESIAN_POINT('',(206.617086,-57.749555,1.585)); +#229851 = LINE('',#229852,#229853); +#229852 = CARTESIAN_POINT('',(206.586679,-57.719148,1.585)); +#229853 = VECTOR('',#229854,1.); +#229854 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#229855 = ORIENTED_EDGE('',*,*,#229856,.T.); +#229856 = EDGE_CURVE('',#229849,#229857,#229859,.T.); +#229857 = VERTEX_POINT('',#229858); +#229858 = CARTESIAN_POINT('',(206.956803,-57.749554,1.585)); +#229859 = CIRCLE('',#229860,0.305619824406); +#229860 = AXIS2_PLACEMENT_3D('',#229861,#229862,#229863); +#229861 = CARTESIAN_POINT('',(206.78694375211,-57.49548449577,1.585)); +#229862 = DIRECTION('',(0.,0.,1.)); +#229863 = DIRECTION('',(-0.555781197907,-0.831328611352,0.)); +#229864 = ORIENTED_EDGE('',*,*,#229865,.T.); +#229865 = EDGE_CURVE('',#229857,#229866,#229868,.T.); +#229866 = VERTEX_POINT('',#229867); +#229867 = CARTESIAN_POINT('',(206.987211,-57.719147,1.585)); +#229868 = LINE('',#229869,#229870); +#229869 = CARTESIAN_POINT('',(206.956803,-57.749554,1.585)); +#229870 = VECTOR('',#229871,1.); +#229871 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#229872 = ORIENTED_EDGE('',*,*,#229873,.T.); +#229873 = EDGE_CURVE('',#229866,#229874,#229876,.T.); +#229874 = VERTEX_POINT('',#229875); +#229875 = CARTESIAN_POINT('',(206.987211,-57.42705,1.585)); +#229876 = CIRCLE('',#229877,0.252886650841); +#229877 = AXIS2_PLACEMENT_3D('',#229878,#229879,#229880); +#229878 = CARTESIAN_POINT('',(206.7807612632,-57.5730985,1.585)); +#229879 = DIRECTION('',(0.,-0.,1.)); +#229880 = DIRECTION('',(0.816372616368,-0.577525541638,-0.)); +#229881 = ORIENTED_EDGE('',*,*,#229882,.T.); +#229882 = EDGE_CURVE('',#229874,#229821,#229883,.T.); +#229883 = LINE('',#229884,#229885); +#229884 = CARTESIAN_POINT('',(206.987211,-57.42705,1.585)); +#229885 = VECTOR('',#229886,1.); +#229886 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#229887 = PLANE('',#229888); +#229888 = AXIS2_PLACEMENT_3D('',#229889,#229890,#229891); +#229889 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229890 = DIRECTION('',(0.,0.,1.)); +#229891 = DIRECTION('',(1.,0.,-0.)); +#229892 = SHELL_BASED_SURFACE_MODEL('',(#229893)); +#229893 = OPEN_SHELL('',(#229894)); +#229894 = ADVANCED_FACE('',(#229895),#229964,.T.); +#229895 = FACE_BOUND('',#229896,.F.); +#229896 = EDGE_LOOP('',(#229897,#229908,#229916,#229924,#229933,#229941, + #229950,#229958)); +#229897 = ORIENTED_EDGE('',*,*,#229898,.T.); +#229898 = EDGE_CURVE('',#229899,#229901,#229903,.T.); +#229899 = VERTEX_POINT('',#229900); +#229900 = CARTESIAN_POINT('',(86.826217,-57.480139,1.585)); +#229901 = VERTEX_POINT('',#229902); +#229902 = CARTESIAN_POINT('',(86.94165,-57.5031,1.585)); +#229903 = CIRCLE('',#229904,6.000007318647E-02); +#229904 = AXIS2_PLACEMENT_3D('',#229905,#229906,#229907); +#229905 = CARTESIAN_POINT('',(86.881649926814,-57.50309982331,1.585)); +#229906 = DIRECTION('',(0.,0.,-1.)); +#229907 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#229908 = ORIENTED_EDGE('',*,*,#229909,.T.); +#229909 = EDGE_CURVE('',#229901,#229910,#229912,.T.); +#229910 = VERTEX_POINT('',#229911); +#229911 = CARTESIAN_POINT('',(86.94165,-57.7131,1.585)); +#229912 = LINE('',#229913,#229914); +#229913 = CARTESIAN_POINT('',(86.94165,-57.5031,1.585)); +#229914 = VECTOR('',#229915,1.); +#229915 = DIRECTION('',(0.,-1.,0.)); +#229916 = ORIENTED_EDGE('',*,*,#229917,.T.); +#229917 = EDGE_CURVE('',#229910,#229918,#229920,.T.); +#229918 = VERTEX_POINT('',#229919); +#229919 = CARTESIAN_POINT('',(93.30165,-57.7131,1.585)); +#229920 = LINE('',#229921,#229922); +#229921 = CARTESIAN_POINT('',(86.94165,-57.7131,1.585)); +#229922 = VECTOR('',#229923,1.); +#229923 = DIRECTION('',(1.,0.,0.)); +#229924 = ORIENTED_EDGE('',*,*,#229925,.T.); +#229925 = EDGE_CURVE('',#229918,#229926,#229928,.T.); +#229926 = VERTEX_POINT('',#229927); +#229927 = CARTESIAN_POINT('',(93.30165,-57.8331,1.585)); +#229928 = CIRCLE('',#229929,6.000000000043E-02); +#229929 = AXIS2_PLACEMENT_3D('',#229930,#229931,#229932); +#229930 = CARTESIAN_POINT('',(93.301650225588,-57.7731,1.585)); +#229931 = DIRECTION('',(0.,0.,-1.)); +#229932 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#229933 = ORIENTED_EDGE('',*,*,#229934,.T.); +#229934 = EDGE_CURVE('',#229926,#229935,#229937,.T.); +#229935 = VERTEX_POINT('',#229936); +#229936 = CARTESIAN_POINT('',(86.88165,-57.8331,1.585)); +#229937 = LINE('',#229938,#229939); +#229938 = CARTESIAN_POINT('',(93.30165,-57.8331,1.585)); +#229939 = VECTOR('',#229940,1.); +#229940 = DIRECTION('',(-1.,0.,0.)); +#229941 = ORIENTED_EDGE('',*,*,#229942,.T.); +#229942 = EDGE_CURVE('',#229935,#229943,#229945,.T.); +#229943 = VERTEX_POINT('',#229944); +#229944 = CARTESIAN_POINT('',(86.82165,-57.7731,1.585)); +#229945 = CIRCLE('',#229946,5.99993201626E-02); +#229946 = AXIS2_PLACEMENT_3D('',#229947,#229948,#229949); +#229947 = CARTESIAN_POINT('',(86.881649320159,-57.77310067984,1.585)); +#229948 = DIRECTION('',(0.,0.,-1.)); +#229949 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#229950 = ORIENTED_EDGE('',*,*,#229951,.T.); +#229951 = EDGE_CURVE('',#229943,#229952,#229954,.T.); +#229952 = VERTEX_POINT('',#229953); +#229953 = CARTESIAN_POINT('',(86.82165,-57.5031,1.585)); +#229954 = LINE('',#229955,#229956); +#229955 = CARTESIAN_POINT('',(86.82165,-57.7731,1.585)); +#229956 = VECTOR('',#229957,1.); +#229957 = DIRECTION('',(0.,1.,0.)); +#229958 = ORIENTED_EDGE('',*,*,#229959,.T.); +#229959 = EDGE_CURVE('',#229952,#229899,#229960,.T.); +#229960 = LINE('',#229961,#229962); +#229961 = CARTESIAN_POINT('',(86.82165,-57.5031,1.585)); +#229962 = VECTOR('',#229963,1.); +#229963 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#229964 = PLANE('',#229965); +#229965 = AXIS2_PLACEMENT_3D('',#229966,#229967,#229968); +#229966 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229967 = DIRECTION('',(0.,0.,1.)); +#229968 = DIRECTION('',(1.,0.,-0.)); +#229969 = SHELL_BASED_SURFACE_MODEL('',(#229970)); +#229970 = OPEN_SHELL('',(#229971)); +#229971 = ADVANCED_FACE('',(#229972,#230042),#230109,.T.); +#229972 = FACE_BOUND('',#229973,.F.); +#229973 = EDGE_LOOP('',(#229974,#229985,#229993,#230002,#230010,#230019, + #230027,#230036)); +#229974 = ORIENTED_EDGE('',*,*,#229975,.T.); +#229975 = EDGE_CURVE('',#229976,#229978,#229980,.T.); +#229976 = VERTEX_POINT('',#229977); +#229977 = CARTESIAN_POINT('',(108.40165,-54.9931,1.585)); +#229978 = VERTEX_POINT('',#229979); +#229979 = CARTESIAN_POINT('',(108.46165,-54.9331,1.585)); +#229980 = CIRCLE('',#229981,5.999932016258E-02); +#229981 = AXIS2_PLACEMENT_3D('',#229982,#229983,#229984); +#229982 = CARTESIAN_POINT('',(108.46164932015,-54.99309932015,1.585)); +#229983 = DIRECTION('',(0.,0.,-1.)); +#229984 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#229985 = ORIENTED_EDGE('',*,*,#229986,.T.); +#229986 = EDGE_CURVE('',#229978,#229987,#229989,.T.); +#229987 = VERTEX_POINT('',#229988); +#229988 = CARTESIAN_POINT('',(156.78165,-54.9331,1.585)); +#229989 = LINE('',#229990,#229991); +#229990 = CARTESIAN_POINT('',(108.46165,-54.9331,1.585)); +#229991 = VECTOR('',#229992,1.); +#229992 = DIRECTION('',(1.,0.,0.)); +#229993 = ORIENTED_EDGE('',*,*,#229994,.T.); +#229994 = EDGE_CURVE('',#229987,#229995,#229997,.T.); +#229995 = VERTEX_POINT('',#229996); +#229996 = CARTESIAN_POINT('',(156.84165,-54.9931,1.585)); +#229997 = CIRCLE('',#229998,5.999932016256E-02); +#229998 = AXIS2_PLACEMENT_3D('',#229999,#230000,#230001); +#229999 = CARTESIAN_POINT('',(156.78165067984,-54.99309932015,1.585)); +#230000 = DIRECTION('',(0.,0.,-1.)); +#230001 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#230002 = ORIENTED_EDGE('',*,*,#230003,.T.); +#230003 = EDGE_CURVE('',#229995,#230004,#230006,.T.); +#230004 = VERTEX_POINT('',#230005); +#230005 = CARTESIAN_POINT('',(156.84165,-57.6531,1.585)); +#230006 = LINE('',#230007,#230008); +#230007 = CARTESIAN_POINT('',(156.84165,-54.9931,1.585)); +#230008 = VECTOR('',#230009,1.); +#230009 = DIRECTION('',(0.,-1.,0.)); +#230010 = ORIENTED_EDGE('',*,*,#230011,.T.); +#230011 = EDGE_CURVE('',#230004,#230012,#230014,.T.); +#230012 = VERTEX_POINT('',#230013); +#230013 = CARTESIAN_POINT('',(156.78165,-57.7131,1.585)); +#230014 = CIRCLE('',#230015,5.999932016254E-02); +#230015 = AXIS2_PLACEMENT_3D('',#230016,#230017,#230018); +#230016 = CARTESIAN_POINT('',(156.78165067984,-57.65310067984,1.585)); +#230017 = DIRECTION('',(0.,0.,-1.)); +#230018 = DIRECTION('',(0.999999999936,1.133081683199E-05,0.)); +#230019 = ORIENTED_EDGE('',*,*,#230020,.T.); +#230020 = EDGE_CURVE('',#230012,#230021,#230023,.T.); +#230021 = VERTEX_POINT('',#230022); +#230022 = CARTESIAN_POINT('',(108.46165,-57.7131,1.585)); +#230023 = LINE('',#230024,#230025); +#230024 = CARTESIAN_POINT('',(156.78165,-57.7131,1.585)); +#230025 = VECTOR('',#230026,1.); +#230026 = DIRECTION('',(-1.,0.,0.)); +#230027 = ORIENTED_EDGE('',*,*,#230028,.T.); +#230028 = EDGE_CURVE('',#230021,#230029,#230031,.T.); +#230029 = VERTEX_POINT('',#230030); +#230030 = CARTESIAN_POINT('',(108.40165,-57.6531,1.585)); +#230031 = CIRCLE('',#230032,5.999932016257E-02); +#230032 = AXIS2_PLACEMENT_3D('',#230033,#230034,#230035); +#230033 = CARTESIAN_POINT('',(108.46164932015,-57.65310067984,1.585)); +#230034 = DIRECTION('',(0.,0.,-1.)); +#230035 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#230036 = ORIENTED_EDGE('',*,*,#230037,.T.); +#230037 = EDGE_CURVE('',#230029,#229976,#230038,.T.); +#230038 = LINE('',#230039,#230040); +#230039 = CARTESIAN_POINT('',(108.40165,-57.6531,1.585)); +#230040 = VECTOR('',#230041,1.); +#230041 = DIRECTION('',(0.,1.,0.)); +#230042 = FACE_BOUND('',#230043,.F.); +#230043 = EDGE_LOOP('',(#230044,#230054,#230062,#230070,#230078,#230086, + #230095,#230103)); +#230044 = ORIENTED_EDGE('',*,*,#230045,.T.); +#230045 = EDGE_CURVE('',#230046,#230048,#230050,.T.); +#230046 = VERTEX_POINT('',#230047); +#230047 = CARTESIAN_POINT('',(156.72165,-57.5931,1.585)); +#230048 = VERTEX_POINT('',#230049); +#230049 = CARTESIAN_POINT('',(156.72165,-55.0531,1.585)); +#230050 = LINE('',#230051,#230052); +#230051 = CARTESIAN_POINT('',(156.72165,-57.5931,1.585)); +#230052 = VECTOR('',#230053,1.); +#230053 = DIRECTION('',(0.,1.,0.)); +#230054 = ORIENTED_EDGE('',*,*,#230055,.T.); +#230055 = EDGE_CURVE('',#230048,#230056,#230058,.T.); +#230056 = VERTEX_POINT('',#230057); +#230057 = CARTESIAN_POINT('',(108.52165,-55.0531,1.585)); +#230058 = LINE('',#230059,#230060); +#230059 = CARTESIAN_POINT('',(156.72165,-55.0531,1.585)); +#230060 = VECTOR('',#230061,1.); +#230061 = DIRECTION('',(-1.,0.,0.)); +#230062 = ORIENTED_EDGE('',*,*,#230063,.T.); +#230063 = EDGE_CURVE('',#230056,#230064,#230066,.T.); +#230064 = VERTEX_POINT('',#230065); +#230065 = CARTESIAN_POINT('',(108.52165,-57.5931,1.585)); +#230066 = LINE('',#230067,#230068); +#230067 = CARTESIAN_POINT('',(108.52165,-55.0531,1.585)); +#230068 = VECTOR('',#230069,1.); +#230069 = DIRECTION('',(0.,-1.,0.)); +#230070 = ORIENTED_EDGE('',*,*,#230071,.T.); +#230071 = EDGE_CURVE('',#230064,#230072,#230074,.T.); +#230072 = VERTEX_POINT('',#230073); +#230073 = CARTESIAN_POINT('',(124.103194,-57.5931,1.585)); +#230074 = LINE('',#230075,#230076); +#230075 = CARTESIAN_POINT('',(108.52165,-57.5931,1.585)); +#230076 = VECTOR('',#230077,1.); +#230077 = DIRECTION('',(1.,0.,0.)); +#230078 = ORIENTED_EDGE('',*,*,#230079,.T.); +#230079 = EDGE_CURVE('',#230072,#230080,#230082,.T.); +#230080 = VERTEX_POINT('',#230081); +#230081 = CARTESIAN_POINT('',(124.109614,-57.59952,1.585)); +#230082 = LINE('',#230083,#230084); +#230083 = CARTESIAN_POINT('',(124.103194,-57.5931,1.585)); +#230084 = VECTOR('',#230085,1.); +#230085 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#230086 = ORIENTED_EDGE('',*,*,#230087,.T.); +#230087 = EDGE_CURVE('',#230080,#230088,#230090,.T.); +#230088 = VERTEX_POINT('',#230089); +#230089 = CARTESIAN_POINT('',(124.276286,-57.59952,1.585)); +#230090 = CIRCLE('',#230091,0.149999353165); +#230091 = AXIS2_PLACEMENT_3D('',#230092,#230093,#230094); +#230092 = CARTESIAN_POINT('',(124.19295,-57.47480064683,1.585)); +#230093 = DIRECTION('',(0.,0.,1.)); +#230094 = DIRECTION('',(-0.555575729107,-0.831465939908,0.)); +#230095 = ORIENTED_EDGE('',*,*,#230096,.T.); +#230096 = EDGE_CURVE('',#230088,#230097,#230099,.T.); +#230097 = VERTEX_POINT('',#230098); +#230098 = CARTESIAN_POINT('',(124.282706,-57.5931,1.585)); +#230099 = LINE('',#230100,#230101); +#230100 = CARTESIAN_POINT('',(124.276286,-57.59952,1.585)); +#230101 = VECTOR('',#230102,1.); +#230102 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#230103 = ORIENTED_EDGE('',*,*,#230104,.T.); +#230104 = EDGE_CURVE('',#230097,#230046,#230105,.T.); +#230105 = LINE('',#230106,#230107); +#230106 = CARTESIAN_POINT('',(124.282706,-57.5931,1.585)); +#230107 = VECTOR('',#230108,1.); +#230108 = DIRECTION('',(1.,0.,0.)); +#230109 = PLANE('',#230110); +#230110 = AXIS2_PLACEMENT_3D('',#230111,#230112,#230113); +#230111 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230112 = DIRECTION('',(0.,0.,1.)); +#230113 = DIRECTION('',(1.,0.,-0.)); +#230114 = SHELL_BASED_SURFACE_MODEL('',(#230115)); +#230115 = OPEN_SHELL('',(#230116)); +#230116 = ADVANCED_FACE('',(#230117,#230228),#230287,.T.); +#230117 = FACE_BOUND('',#230118,.F.); +#230118 = EDGE_LOOP('',(#230119,#230129,#230138,#230146,#230154,#230162, + #230171,#230179,#230188,#230196,#230205,#230213,#230222)); +#230119 = ORIENTED_EDGE('',*,*,#230120,.T.); +#230120 = EDGE_CURVE('',#230121,#230123,#230125,.T.); +#230121 = VERTEX_POINT('',#230122); +#230122 = CARTESIAN_POINT('',(159.759468,-56.911227,1.585)); +#230123 = VERTEX_POINT('',#230124); +#230124 = CARTESIAN_POINT('',(160.130573,-56.653214,1.585)); +#230125 = LINE('',#230126,#230127); +#230126 = CARTESIAN_POINT('',(159.759468,-56.911227,1.585)); +#230127 = VECTOR('',#230128,1.); +#230128 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#230129 = ORIENTED_EDGE('',*,*,#230130,.T.); +#230130 = EDGE_CURVE('',#230123,#230131,#230133,.T.); +#230131 = VERTEX_POINT('',#230132); +#230132 = CARTESIAN_POINT('',(160.203779,-56.783309,1.585)); +#230133 = CIRCLE('',#230134,7.500005951703E-02); +#230134 = AXIS2_PLACEMENT_3D('',#230135,#230136,#230137); +#230135 = CARTESIAN_POINT('',(160.16076874739,-56.72186693705,1.585)); +#230136 = DIRECTION('',(0.,0.,-1.)); +#230137 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#230138 = ORIENTED_EDGE('',*,*,#230139,.T.); +#230139 = EDGE_CURVE('',#230131,#230140,#230142,.T.); +#230140 = VERTEX_POINT('',#230141); +#230141 = CARTESIAN_POINT('',(159.759578,-57.094249,1.585)); +#230142 = LINE('',#230143,#230144); +#230143 = CARTESIAN_POINT('',(160.203779,-56.783309,1.585)); +#230144 = VECTOR('',#230145,1.); +#230145 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#230146 = ORIENTED_EDGE('',*,*,#230147,.T.); +#230147 = EDGE_CURVE('',#230140,#230148,#230150,.T.); +#230148 = VERTEX_POINT('',#230149); +#230149 = CARTESIAN_POINT('',(159.759578,-57.218295,1.585)); +#230150 = LINE('',#230151,#230152); +#230151 = CARTESIAN_POINT('',(159.759578,-57.094249,1.585)); +#230152 = VECTOR('',#230153,1.); +#230153 = DIRECTION('',(0.,-1.,0.)); +#230154 = ORIENTED_EDGE('',*,*,#230155,.T.); +#230155 = EDGE_CURVE('',#230148,#230156,#230158,.T.); +#230156 = VERTEX_POINT('',#230157); +#230157 = CARTESIAN_POINT('',(160.175401,-57.219736,1.585)); +#230158 = LINE('',#230159,#230160); +#230159 = CARTESIAN_POINT('',(159.759578,-57.218295,1.585)); +#230160 = VECTOR('',#230161,1.); +#230161 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#230162 = ORIENTED_EDGE('',*,*,#230163,.T.); +#230163 = EDGE_CURVE('',#230156,#230164,#230166,.T.); +#230164 = VERTEX_POINT('',#230165); +#230165 = CARTESIAN_POINT('',(160.160769,-57.368295,1.585)); +#230166 = CIRCLE('',#230167,7.500006711465E-02); +#230167 = AXIS2_PLACEMENT_3D('',#230168,#230169,#230170); +#230168 = CARTESIAN_POINT('',(160.16076906711,-57.29329493288,1.585)); +#230169 = DIRECTION('',(0.,0.,-1.)); +#230170 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#230171 = ORIENTED_EDGE('',*,*,#230172,.T.); +#230172 = EDGE_CURVE('',#230164,#230173,#230175,.T.); +#230173 = VERTEX_POINT('',#230174); +#230174 = CARTESIAN_POINT('',(159.146137,-57.366854,1.585)); +#230175 = LINE('',#230176,#230177); +#230176 = CARTESIAN_POINT('',(160.160769,-57.368295,1.585)); +#230177 = VECTOR('',#230178,1.); +#230178 = DIRECTION('',(-0.99999899149,1.420217918165E-03,0.)); +#230179 = ORIENTED_EDGE('',*,*,#230180,.T.); +#230180 = EDGE_CURVE('',#230173,#230181,#230183,.T.); +#230181 = VERTEX_POINT('',#230182); +#230182 = CARTESIAN_POINT('',(159.085769,-57.293295,1.585)); +#230183 = CIRCLE('',#230184,7.500074938983E-02); +#230184 = AXIS2_PLACEMENT_3D('',#230185,#230186,#230187); +#230185 = CARTESIAN_POINT('',(159.16076974938,-57.29329453389,1.585)); +#230186 = DIRECTION('',(0.,0.,-1.)); +#230187 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#230188 = ORIENTED_EDGE('',*,*,#230189,.T.); +#230189 = EDGE_CURVE('',#230181,#230190,#230192,.T.); +#230190 = VERTEX_POINT('',#230191); +#230191 = CARTESIAN_POINT('',(159.088432,-56.892534,1.585)); +#230192 = LINE('',#230193,#230194); +#230193 = CARTESIAN_POINT('',(159.085769,-57.293295,1.585)); +#230194 = VECTOR('',#230195,1.); +#230195 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#230196 = ORIENTED_EDGE('',*,*,#230197,.T.); +#230197 = EDGE_CURVE('',#230190,#230198,#230200,.T.); +#230198 = VERTEX_POINT('',#230199); +#230199 = CARTESIAN_POINT('',(159.336613,-56.648308,1.585)); +#230200 = CIRCLE('',#230201,0.3486213829); +#230201 = AXIS2_PLACEMENT_3D('',#230202,#230203,#230204); +#230202 = CARTESIAN_POINT('',(159.42437322951,-56.98570244383,1.585)); +#230203 = DIRECTION('',(0.,0.,-1.)); +#230204 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#230205 = ORIENTED_EDGE('',*,*,#230206,.T.); +#230206 = EDGE_CURVE('',#230198,#230207,#230209,.T.); +#230207 = VERTEX_POINT('',#230208); +#230208 = CARTESIAN_POINT('',(159.508734,-56.648308,1.585)); +#230209 = LINE('',#230210,#230211); +#230210 = CARTESIAN_POINT('',(159.336613,-56.648308,1.585)); +#230211 = VECTOR('',#230212,1.); +#230212 = DIRECTION('',(1.,0.,0.)); +#230213 = ORIENTED_EDGE('',*,*,#230214,.T.); +#230214 = EDGE_CURVE('',#230207,#230215,#230217,.T.); +#230215 = VERTEX_POINT('',#230216); +#230216 = CARTESIAN_POINT('',(159.758137,-56.897711,1.585)); +#230217 = CIRCLE('',#230218,0.347870264855); +#230218 = AXIS2_PLACEMENT_3D('',#230219,#230220,#230221); +#230219 = CARTESIAN_POINT('',(159.42140626502,-56.98503873497,1.585)); +#230220 = DIRECTION('',(0.,0.,-1.)); +#230221 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#230222 = ORIENTED_EDGE('',*,*,#230223,.T.); +#230223 = EDGE_CURVE('',#230215,#230121,#230224,.T.); +#230224 = LINE('',#230225,#230226); +#230225 = CARTESIAN_POINT('',(159.758137,-56.897711,1.585)); +#230226 = VECTOR('',#230227,1.); +#230227 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#230228 = FACE_BOUND('',#230229,.F.); +#230229 = EDGE_LOOP('',(#230230,#230241,#230249,#230257,#230265,#230273, + #230281)); +#230230 = ORIENTED_EDGE('',*,*,#230231,.T.); +#230231 = EDGE_CURVE('',#230232,#230234,#230236,.T.); +#230232 = VERTEX_POINT('',#230233); +#230233 = CARTESIAN_POINT('',(159.544913,-56.831125,1.585)); +#230234 = VERTEX_POINT('',#230235); +#230235 = CARTESIAN_POINT('',(159.270027,-56.861532,1.585)); +#230236 = CIRCLE('',#230237,0.198386215365); +#230237 = AXIS2_PLACEMENT_3D('',#230238,#230239,#230240); +#230238 = CARTESIAN_POINT('',(159.42310995783,-56.9877171753,1.585)); +#230239 = DIRECTION('',(0.,0.,1.)); +#230240 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#230241 = ORIENTED_EDGE('',*,*,#230242,.T.); +#230242 = EDGE_CURVE('',#230234,#230243,#230245,.T.); +#230243 = VERTEX_POINT('',#230244); +#230244 = CARTESIAN_POINT('',(159.235769,-56.930048,1.585)); +#230245 = LINE('',#230246,#230247); +#230246 = CARTESIAN_POINT('',(159.270027,-56.861532,1.585)); +#230247 = VECTOR('',#230248,1.); +#230248 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#230249 = ORIENTED_EDGE('',*,*,#230250,.T.); +#230250 = EDGE_CURVE('',#230243,#230251,#230253,.T.); +#230251 = VERTEX_POINT('',#230252); +#230252 = CARTESIAN_POINT('',(159.235769,-57.218295,1.585)); +#230253 = LINE('',#230254,#230255); +#230254 = CARTESIAN_POINT('',(159.235769,-56.930048,1.585)); +#230255 = VECTOR('',#230256,1.); +#230256 = DIRECTION('',(0.,-1.,0.)); +#230257 = ORIENTED_EDGE('',*,*,#230258,.T.); +#230258 = EDGE_CURVE('',#230251,#230259,#230261,.T.); +#230259 = VERTEX_POINT('',#230260); +#230260 = CARTESIAN_POINT('',(159.609578,-57.218295,1.585)); +#230261 = LINE('',#230262,#230263); +#230262 = CARTESIAN_POINT('',(159.235769,-57.218295,1.585)); +#230263 = VECTOR('',#230264,1.); +#230264 = DIRECTION('',(1.,0.,0.)); +#230265 = ORIENTED_EDGE('',*,*,#230266,.T.); +#230266 = EDGE_CURVE('',#230259,#230267,#230269,.T.); +#230267 = VERTEX_POINT('',#230268); +#230268 = CARTESIAN_POINT('',(159.609578,-56.930048,1.585)); +#230269 = LINE('',#230270,#230271); +#230270 = CARTESIAN_POINT('',(159.609578,-57.218295,1.585)); +#230271 = VECTOR('',#230272,1.); +#230272 = DIRECTION('',(0.,1.,0.)); +#230273 = ORIENTED_EDGE('',*,*,#230274,.T.); +#230274 = EDGE_CURVE('',#230267,#230275,#230277,.T.); +#230275 = VERTEX_POINT('',#230276); +#230276 = CARTESIAN_POINT('',(159.57532,-56.861532,1.585)); +#230277 = LINE('',#230278,#230279); +#230278 = CARTESIAN_POINT('',(159.609578,-56.930048,1.585)); +#230279 = VECTOR('',#230280,1.); +#230280 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#230281 = ORIENTED_EDGE('',*,*,#230282,.T.); +#230282 = EDGE_CURVE('',#230275,#230232,#230283,.T.); +#230283 = LINE('',#230284,#230285); +#230284 = CARTESIAN_POINT('',(159.57532,-56.861532,1.585)); +#230285 = VECTOR('',#230286,1.); +#230286 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#230287 = PLANE('',#230288); +#230288 = AXIS2_PLACEMENT_3D('',#230289,#230290,#230291); +#230289 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230290 = DIRECTION('',(0.,0.,1.)); +#230291 = DIRECTION('',(1.,0.,-0.)); +#230292 = SHELL_BASED_SURFACE_MODEL('',(#230293)); +#230293 = OPEN_SHELL('',(#230294)); +#230294 = ADVANCED_FACE('',(#230295),#230365,.T.); +#230295 = FACE_BOUND('',#230296,.F.); +#230296 = EDGE_LOOP('',(#230297,#230308,#230316,#230325,#230333,#230342, + #230350,#230359)); +#230297 = ORIENTED_EDGE('',*,*,#230298,.T.); +#230298 = EDGE_CURVE('',#230299,#230301,#230303,.T.); +#230299 = VERTEX_POINT('',#230300); +#230300 = CARTESIAN_POINT('',(103.861837,-56.729992,1.585)); +#230301 = VERTEX_POINT('',#230302); +#230302 = CARTESIAN_POINT('',(103.876469,-56.581433,1.585)); +#230303 = CIRCLE('',#230304,7.500006711464E-02); +#230304 = AXIS2_PLACEMENT_3D('',#230305,#230306,#230307); +#230305 = CARTESIAN_POINT('',(103.87646893288,-56.65643306711,1.585)); +#230306 = DIRECTION('',(0.,0.,-1.)); +#230307 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#230308 = ORIENTED_EDGE('',*,*,#230309,.T.); +#230309 = EDGE_CURVE('',#230301,#230310,#230312,.T.); +#230310 = VERTEX_POINT('',#230311); +#230311 = CARTESIAN_POINT('',(104.598159,-56.582162,1.585)); +#230312 = LINE('',#230313,#230314); +#230313 = CARTESIAN_POINT('',(103.876469,-56.581433,1.585)); +#230314 = VECTOR('',#230315,1.); +#230315 = DIRECTION('',(0.99999948982,-1.01012848741E-03,0.)); +#230316 = ORIENTED_EDGE('',*,*,#230317,.T.); +#230317 = EDGE_CURVE('',#230310,#230318,#230320,.T.); +#230318 = VERTEX_POINT('',#230319); +#230319 = CARTESIAN_POINT('',(104.950739,-56.93474,1.585)); +#230320 = CIRCLE('',#230321,0.383787726409); +#230321 = AXIS2_PLACEMENT_3D('',#230322,#230323,#230324); +#230322 = CARTESIAN_POINT('',(104.56812818139,-56.96477298896,1.585)); +#230323 = DIRECTION('',(0.,0.,-1.)); +#230324 = DIRECTION('',(7.824851224111E-02,0.996933884634,0.)); +#230325 = ORIENTED_EDGE('',*,*,#230326,.T.); +#230326 = EDGE_CURVE('',#230318,#230327,#230329,.T.); +#230327 = VERTEX_POINT('',#230328); +#230328 = CARTESIAN_POINT('',(104.950028,-57.052017,1.585)); +#230329 = LINE('',#230330,#230331); +#230330 = CARTESIAN_POINT('',(104.950739,-56.93474,1.585)); +#230331 = VECTOR('',#230332,1.); +#230332 = DIRECTION('',(-6.062458402253E-03,-0.99998162313,0.)); +#230333 = ORIENTED_EDGE('',*,*,#230334,.T.); +#230334 = EDGE_CURVE('',#230327,#230335,#230337,.T.); +#230335 = VERTEX_POINT('',#230336); +#230336 = CARTESIAN_POINT('',(104.801469,-57.037385,1.585)); +#230337 = CIRCLE('',#230338,7.500006711464E-02); +#230338 = AXIS2_PLACEMENT_3D('',#230339,#230340,#230341); +#230339 = CARTESIAN_POINT('',(104.87646906711,-57.03738506711,1.585)); +#230340 = DIRECTION('',(-0.,0.,-1.)); +#230341 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#230342 = ORIENTED_EDGE('',*,*,#230343,.T.); +#230343 = EDGE_CURVE('',#230335,#230344,#230346,.T.); +#230344 = VERTEX_POINT('',#230345); +#230345 = CARTESIAN_POINT('',(104.801469,-56.954317,1.585)); +#230346 = LINE('',#230347,#230348); +#230347 = CARTESIAN_POINT('',(104.801469,-57.037385,1.585)); +#230348 = VECTOR('',#230349,1.); +#230349 = DIRECTION('',(0.,1.,0.)); +#230350 = ORIENTED_EDGE('',*,*,#230351,.T.); +#230351 = EDGE_CURVE('',#230344,#230352,#230354,.T.); +#230352 = VERTEX_POINT('',#230353); +#230353 = CARTESIAN_POINT('',(104.578584,-56.731433,1.585)); +#230354 = CIRCLE('',#230355,0.239434552369); +#230355 = AXIS2_PLACEMENT_3D('',#230356,#230357,#230358); +#230356 = CARTESIAN_POINT('',(104.56257060777,-56.97033146407,1.585)); +#230357 = DIRECTION('',(0.,0.,1.)); +#230358 = DIRECTION('',(0.997760723601,6.688451569426E-02,-0.)); +#230359 = ORIENTED_EDGE('',*,*,#230360,.T.); +#230360 = EDGE_CURVE('',#230352,#230299,#230361,.T.); +#230361 = LINE('',#230362,#230363); +#230362 = CARTESIAN_POINT('',(104.578584,-56.731433,1.585)); +#230363 = VECTOR('',#230364,1.); +#230364 = DIRECTION('',(-0.999997979007,2.010468251347E-03,0.)); +#230365 = PLANE('',#230366); +#230366 = AXIS2_PLACEMENT_3D('',#230367,#230368,#230369); +#230367 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230368 = DIRECTION('',(0.,0.,1.)); +#230369 = DIRECTION('',(1.,0.,-0.)); +#230370 = SHELL_BASED_SURFACE_MODEL('',(#230371)); +#230371 = OPEN_SHELL('',(#230372)); +#230372 = ADVANCED_FACE('',(#230373),#230532,.T.); +#230373 = FACE_BOUND('',#230374,.F.); +#230374 = EDGE_LOOP('',(#230375,#230386,#230394,#230402,#230410,#230418, + #230426,#230434,#230443,#230451,#230460,#230468,#230476,#230484, + #230493,#230501,#230509,#230517,#230526)); +#230375 = ORIENTED_EDGE('',*,*,#230376,.T.); +#230376 = EDGE_CURVE('',#230377,#230379,#230381,.T.); +#230377 = VERTEX_POINT('',#230378); +#230378 = CARTESIAN_POINT('',(169.468823,-55.563456,1.585)); +#230379 = VERTEX_POINT('',#230380); +#230380 = CARTESIAN_POINT('',(169.978218,-55.572786,1.585)); +#230381 = CIRCLE('',#230382,0.450326844012); +#230382 = AXIS2_PLACEMENT_3D('',#230383,#230384,#230385); +#230383 = CARTESIAN_POINT('',(169.7167200301,-55.93940989199,1.585)); +#230384 = DIRECTION('',(0.,0.,-1.)); +#230385 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#230386 = ORIENTED_EDGE('',*,*,#230387,.T.); +#230387 = EDGE_CURVE('',#230379,#230388,#230390,.T.); +#230388 = VERTEX_POINT('',#230389); +#230389 = CARTESIAN_POINT('',(170.041671,-55.638316,1.585)); +#230390 = LINE('',#230391,#230392); +#230391 = CARTESIAN_POINT('',(169.978218,-55.572786,1.585)); +#230392 = VECTOR('',#230393,1.); +#230393 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#230394 = ORIENTED_EDGE('',*,*,#230395,.T.); +#230395 = EDGE_CURVE('',#230388,#230396,#230398,.T.); +#230396 = VERTEX_POINT('',#230397); +#230397 = CARTESIAN_POINT('',(170.099732,-55.758763,1.585)); +#230398 = LINE('',#230399,#230400); +#230399 = CARTESIAN_POINT('',(170.041671,-55.638316,1.585)); +#230400 = VECTOR('',#230401,1.); +#230401 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#230402 = ORIENTED_EDGE('',*,*,#230403,.T.); +#230403 = EDGE_CURVE('',#230396,#230404,#230406,.T.); +#230404 = VERTEX_POINT('',#230405); +#230405 = CARTESIAN_POINT('',(170.098973,-55.885095,1.585)); +#230406 = LINE('',#230407,#230408); +#230407 = CARTESIAN_POINT('',(170.099732,-55.758763,1.585)); +#230408 = VECTOR('',#230409,1.); +#230409 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#230410 = ORIENTED_EDGE('',*,*,#230411,.T.); +#230411 = EDGE_CURVE('',#230404,#230412,#230414,.T.); +#230412 = VERTEX_POINT('',#230413); +#230413 = CARTESIAN_POINT('',(170.040915,-56.053158,1.585)); +#230414 = LINE('',#230415,#230416); +#230415 = CARTESIAN_POINT('',(170.098973,-55.885095,1.585)); +#230416 = VECTOR('',#230417,1.); +#230417 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#230418 = ORIENTED_EDGE('',*,*,#230419,.T.); +#230419 = EDGE_CURVE('',#230412,#230420,#230422,.T.); +#230420 = VERTEX_POINT('',#230421); +#230421 = CARTESIAN_POINT('',(169.588192,-56.507919,1.585)); +#230422 = LINE('',#230423,#230424); +#230423 = CARTESIAN_POINT('',(170.040915,-56.053158,1.585)); +#230424 = VECTOR('',#230425,1.); +#230425 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#230426 = ORIENTED_EDGE('',*,*,#230427,.T.); +#230427 = EDGE_CURVE('',#230420,#230428,#230430,.T.); +#230428 = VERTEX_POINT('',#230429); +#230429 = CARTESIAN_POINT('',(170.040805,-56.50936,1.585)); +#230430 = LINE('',#230431,#230432); +#230431 = CARTESIAN_POINT('',(169.588192,-56.507919,1.585)); +#230432 = VECTOR('',#230433,1.); +#230433 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#230434 = ORIENTED_EDGE('',*,*,#230435,.T.); +#230435 = EDGE_CURVE('',#230428,#230436,#230438,.T.); +#230436 = VERTEX_POINT('',#230437); +#230437 = CARTESIAN_POINT('',(170.026173,-56.657919,1.585)); +#230438 = CIRCLE('',#230439,7.500006711464E-02); +#230439 = AXIS2_PLACEMENT_3D('',#230440,#230441,#230442); +#230440 = CARTESIAN_POINT('',(170.02617306711,-56.58291893288,1.585)); +#230441 = DIRECTION('',(0.,0.,-1.)); +#230442 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#230443 = ORIENTED_EDGE('',*,*,#230444,.T.); +#230444 = EDGE_CURVE('',#230436,#230445,#230447,.T.); +#230445 = VERTEX_POINT('',#230446); +#230446 = CARTESIAN_POINT('',(169.392494,-56.656478,1.585)); +#230447 = LINE('',#230448,#230449); +#230448 = CARTESIAN_POINT('',(170.026173,-56.657919,1.585)); +#230449 = VECTOR('',#230450,1.); +#230450 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#230451 = ORIENTED_EDGE('',*,*,#230452,.T.); +#230452 = EDGE_CURVE('',#230445,#230453,#230455,.T.); +#230453 = VERTEX_POINT('',#230454); +#230454 = CARTESIAN_POINT('',(169.354093,-56.529886,1.585)); +#230455 = CIRCLE('',#230456,7.500021013109E-02); +#230456 = AXIS2_PLACEMENT_3D('',#230457,#230458,#230459); +#230457 = CARTESIAN_POINT('',(169.4071263167,-56.58291899764,1.585)); +#230458 = DIRECTION('',(0.,0.,-1.)); +#230459 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#230460 = ORIENTED_EDGE('',*,*,#230461,.T.); +#230461 = EDGE_CURVE('',#230453,#230462,#230464,.T.); +#230462 = VERTEX_POINT('',#230463); +#230463 = CARTESIAN_POINT('',(169.913001,-55.970976,1.585)); +#230464 = LINE('',#230465,#230466); +#230465 = CARTESIAN_POINT('',(169.354093,-56.529886,1.585)); +#230466 = VECTOR('',#230467,1.); +#230467 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#230468 = ORIENTED_EDGE('',*,*,#230469,.T.); +#230469 = EDGE_CURVE('',#230462,#230470,#230472,.T.); +#230470 = VERTEX_POINT('',#230471); +#230471 = CARTESIAN_POINT('',(169.951173,-55.856463,1.585)); +#230472 = LINE('',#230473,#230474); +#230473 = CARTESIAN_POINT('',(169.913001,-55.970976,1.585)); +#230474 = VECTOR('',#230475,1.); +#230475 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#230476 = ORIENTED_EDGE('',*,*,#230477,.T.); +#230477 = EDGE_CURVE('',#230470,#230478,#230480,.T.); +#230478 = VERTEX_POINT('',#230479); +#230479 = CARTESIAN_POINT('',(169.951173,-55.7911,1.585)); +#230480 = LINE('',#230481,#230482); +#230481 = CARTESIAN_POINT('',(169.951173,-55.856463,1.585)); +#230482 = VECTOR('',#230483,1.); +#230483 = DIRECTION('',(0.,1.,0.)); +#230484 = ORIENTED_EDGE('',*,*,#230485,.T.); +#230485 = EDGE_CURVE('',#230478,#230486,#230488,.T.); +#230486 = VERTEX_POINT('',#230487); +#230487 = CARTESIAN_POINT('',(169.817992,-55.657919,1.585)); +#230488 = CIRCLE('',#230489,0.18686440374); +#230489 = AXIS2_PLACEMENT_3D('',#230490,#230491,#230492); +#230490 = CARTESIAN_POINT('',(169.770456,-55.838636,1.585)); +#230491 = DIRECTION('',(0.,0.,1.)); +#230492 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#230493 = ORIENTED_EDGE('',*,*,#230494,.T.); +#230494 = EDGE_CURVE('',#230486,#230495,#230497,.T.); +#230495 = VERTEX_POINT('',#230496); +#230496 = CARTESIAN_POINT('',(169.615307,-55.657919,1.585)); +#230497 = LINE('',#230498,#230499); +#230498 = CARTESIAN_POINT('',(169.817992,-55.657919,1.585)); +#230499 = VECTOR('',#230500,1.); +#230500 = DIRECTION('',(-1.,0.,0.)); +#230501 = ORIENTED_EDGE('',*,*,#230502,.T.); +#230502 = EDGE_CURVE('',#230495,#230503,#230505,.T.); +#230503 = VERTEX_POINT('',#230504); +#230504 = CARTESIAN_POINT('',(169.546791,-55.692177,1.585)); +#230505 = LINE('',#230506,#230507); +#230506 = CARTESIAN_POINT('',(169.615307,-55.657919,1.585)); +#230507 = VECTOR('',#230508,1.); +#230508 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#230509 = ORIENTED_EDGE('',*,*,#230510,.T.); +#230510 = EDGE_CURVE('',#230503,#230511,#230513,.T.); +#230511 = VERTEX_POINT('',#230512); +#230512 = CARTESIAN_POINT('',(169.496413,-55.740517,1.585)); +#230513 = LINE('',#230514,#230515); +#230514 = CARTESIAN_POINT('',(169.546791,-55.692177,1.585)); +#230515 = VECTOR('',#230516,1.); +#230516 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#230517 = ORIENTED_EDGE('',*,*,#230518,.T.); +#230518 = EDGE_CURVE('',#230511,#230519,#230521,.T.); +#230519 = VERTEX_POINT('',#230520); +#230520 = CARTESIAN_POINT('',(169.401712,-55.625124,1.585)); +#230521 = CIRCLE('',#230522,7.499996838527E-02); +#230522 = AXIS2_PLACEMENT_3D('',#230523,#230524,#230525); +#230523 = CARTESIAN_POINT('',(169.454745,-55.67815697246,1.585)); +#230524 = DIRECTION('',(0.,0.,-1.)); +#230525 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#230526 = ORIENTED_EDGE('',*,*,#230527,.T.); +#230527 = EDGE_CURVE('',#230519,#230377,#230528,.T.); +#230528 = LINE('',#230529,#230530); +#230529 = CARTESIAN_POINT('',(169.401712,-55.625124,1.585)); +#230530 = VECTOR('',#230531,1.); +#230531 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#230532 = PLANE('',#230533); +#230533 = AXIS2_PLACEMENT_3D('',#230534,#230535,#230536); +#230534 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230535 = DIRECTION('',(0.,0.,1.)); +#230536 = DIRECTION('',(1.,0.,-0.)); +#230537 = SHELL_BASED_SURFACE_MODEL('',(#230538)); +#230538 = OPEN_SHELL('',(#230539)); +#230539 = ADVANCED_FACE('',(#230540),#230660,.T.); +#230540 = FACE_BOUND('',#230541,.F.); +#230541 = EDGE_LOOP('',(#230542,#230553,#230561,#230570,#230578,#230587, + #230595,#230604,#230612,#230621,#230629,#230638,#230646,#230654)); +#230542 = ORIENTED_EDGE('',*,*,#230543,.T.); +#230543 = EDGE_CURVE('',#230544,#230546,#230548,.T.); +#230544 = VERTEX_POINT('',#230545); +#230545 = CARTESIAN_POINT('',(168.413077,-55.520559,1.585)); +#230546 = VERTEX_POINT('',#230547); +#230547 = CARTESIAN_POINT('',(168.529745,-55.582919,1.585)); +#230548 = CIRCLE('',#230549,7.500000000003E-02); +#230549 = AXIS2_PLACEMENT_3D('',#230550,#230551,#230552); +#230550 = CARTESIAN_POINT('',(168.454745,-55.58291906555,1.585)); +#230551 = DIRECTION('',(0.,0.,-1.)); +#230552 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#230553 = ORIENTED_EDGE('',*,*,#230554,.T.); +#230554 = EDGE_CURVE('',#230546,#230555,#230557,.T.); +#230555 = VERTEX_POINT('',#230556); +#230556 = CARTESIAN_POINT('',(168.529745,-56.374737,1.585)); +#230557 = LINE('',#230558,#230559); +#230558 = CARTESIAN_POINT('',(168.529745,-55.582919,1.585)); +#230559 = VECTOR('',#230560,1.); +#230560 = DIRECTION('',(0.,-1.,0.)); +#230561 = ORIENTED_EDGE('',*,*,#230562,.T.); +#230562 = EDGE_CURVE('',#230555,#230563,#230565,.T.); +#230563 = VERTEX_POINT('',#230564); +#230564 = CARTESIAN_POINT('',(168.662926,-56.507919,1.585)); +#230565 = CIRCLE('',#230566,0.186867373533); +#230566 = AXIS2_PLACEMENT_3D('',#230567,#230568,#230569); +#230567 = CARTESIAN_POINT('',(168.71046471388,-56.32719964305,1.585)); +#230568 = DIRECTION('',(0.,0.,1.)); +#230569 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#230570 = ORIENTED_EDGE('',*,*,#230571,.T.); +#230571 = EDGE_CURVE('',#230563,#230572,#230574,.T.); +#230572 = VERTEX_POINT('',#230573); +#230573 = CARTESIAN_POINT('',(168.817992,-56.507919,1.585)); +#230574 = LINE('',#230575,#230576); +#230575 = CARTESIAN_POINT('',(168.662926,-56.507919,1.585)); +#230576 = VECTOR('',#230577,1.); +#230577 = DIRECTION('',(1.,0.,0.)); +#230578 = ORIENTED_EDGE('',*,*,#230579,.T.); +#230579 = EDGE_CURVE('',#230572,#230580,#230582,.T.); +#230580 = VERTEX_POINT('',#230581); +#230581 = CARTESIAN_POINT('',(168.951173,-56.374737,1.585)); +#230582 = CIRCLE('',#230583,0.186867760544); +#230583 = AXIS2_PLACEMENT_3D('',#230584,#230585,#230586); +#230584 = CARTESIAN_POINT('',(168.77045296928,-56.32719932622,1.585)); +#230585 = DIRECTION('',(0.,0.,1.)); +#230586 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#230587 = ORIENTED_EDGE('',*,*,#230588,.T.); +#230588 = EDGE_CURVE('',#230580,#230589,#230591,.T.); +#230589 = VERTEX_POINT('',#230590); +#230590 = CARTESIAN_POINT('',(168.952614,-55.568287,1.585)); +#230591 = LINE('',#230592,#230593); +#230592 = CARTESIAN_POINT('',(168.951173,-56.374737,1.585)); +#230593 = VECTOR('',#230594,1.); +#230594 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#230595 = ORIENTED_EDGE('',*,*,#230596,.T.); +#230596 = EDGE_CURVE('',#230589,#230597,#230599,.T.); +#230597 = VERTEX_POINT('',#230598); +#230598 = CARTESIAN_POINT('',(169.101173,-55.582919,1.585)); +#230599 = CIRCLE('',#230600,7.500006711463E-02); +#230600 = AXIS2_PLACEMENT_3D('',#230601,#230602,#230603); +#230601 = CARTESIAN_POINT('',(169.02617293288,-55.58291893288,1.585)); +#230602 = DIRECTION('',(0.,0.,-1.)); +#230603 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#230604 = ORIENTED_EDGE('',*,*,#230605,.T.); +#230605 = EDGE_CURVE('',#230597,#230606,#230608,.T.); +#230606 = VERTEX_POINT('',#230607); +#230607 = CARTESIAN_POINT('',(169.09851,-56.412252,1.585)); +#230608 = LINE('',#230609,#230610); +#230609 = CARTESIAN_POINT('',(169.101173,-55.582919,1.585)); +#230610 = VECTOR('',#230611,1.); +#230611 = DIRECTION('',(-3.210997598685E-03,-0.999994844734,0.)); +#230612 = ORIENTED_EDGE('',*,*,#230613,.T.); +#230613 = EDGE_CURVE('',#230606,#230614,#230616,.T.); +#230614 = VERTEX_POINT('',#230615); +#230615 = CARTESIAN_POINT('',(168.850329,-56.656478,1.585)); +#230616 = CIRCLE('',#230617,0.348635327447); +#230617 = AXIS2_PLACEMENT_3D('',#230618,#230619,#230620); +#230618 = CARTESIAN_POINT('',(168.76255748129,-56.31907208415,1.585)); +#230619 = DIRECTION('',(0.,0.,-1.)); +#230620 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#230621 = ORIENTED_EDGE('',*,*,#230622,.T.); +#230622 = EDGE_CURVE('',#230614,#230623,#230625,.T.); +#230623 = VERTEX_POINT('',#230624); +#230624 = CARTESIAN_POINT('',(168.625411,-56.655256,1.585)); +#230625 = LINE('',#230626,#230627); +#230626 = CARTESIAN_POINT('',(168.850329,-56.656478,1.585)); +#230627 = VECTOR('',#230628,1.); +#230628 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#230629 = ORIENTED_EDGE('',*,*,#230630,.T.); +#230630 = EDGE_CURVE('',#230623,#230631,#230633,.T.); +#230631 = VERTEX_POINT('',#230632); +#230632 = CARTESIAN_POINT('',(168.381186,-56.407074,1.585)); +#230633 = CIRCLE('',#230634,0.348628446662); +#230634 = AXIS2_PLACEMENT_3D('',#230635,#230636,#230637); +#230635 = CARTESIAN_POINT('',(168.71858661322,-56.31930942847,1.585)); +#230636 = DIRECTION('',(0.,0.,-1.)); +#230637 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#230638 = ORIENTED_EDGE('',*,*,#230639,.T.); +#230639 = EDGE_CURVE('',#230631,#230640,#230642,.T.); +#230640 = VERTEX_POINT('',#230641); +#230641 = CARTESIAN_POINT('',(168.381186,-55.568287,1.585)); +#230642 = LINE('',#230643,#230644); +#230643 = CARTESIAN_POINT('',(168.381186,-56.407074,1.585)); +#230644 = VECTOR('',#230645,1.); +#230645 = DIRECTION('',(0.,1.,0.)); +#230646 = ORIENTED_EDGE('',*,*,#230647,.T.); +#230647 = EDGE_CURVE('',#230640,#230648,#230650,.T.); +#230648 = VERTEX_POINT('',#230649); +#230649 = CARTESIAN_POINT('',(168.392385,-55.541251,1.585)); +#230650 = LINE('',#230651,#230652); +#230651 = CARTESIAN_POINT('',(168.381186,-55.568287,1.585)); +#230652 = VECTOR('',#230653,1.); +#230653 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#230654 = ORIENTED_EDGE('',*,*,#230655,.T.); +#230655 = EDGE_CURVE('',#230648,#230544,#230656,.T.); +#230656 = LINE('',#230657,#230658); +#230657 = CARTESIAN_POINT('',(168.392385,-55.541251,1.585)); +#230658 = VECTOR('',#230659,1.); +#230659 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#230660 = PLANE('',#230661); +#230661 = AXIS2_PLACEMENT_3D('',#230662,#230663,#230664); +#230662 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230663 = DIRECTION('',(0.,0.,1.)); +#230664 = DIRECTION('',(1.,0.,-0.)); +#230665 = SHELL_BASED_SURFACE_MODEL('',(#230666)); +#230666 = OPEN_SHELL('',(#230667)); +#230667 = ADVANCED_FACE('',(#230668),#230729,.T.); +#230668 = FACE_BOUND('',#230669,.F.); +#230669 = EDGE_LOOP('',(#230670,#230681,#230689,#230698,#230706,#230714, + #230723)); +#230670 = ORIENTED_EDGE('',*,*,#230671,.T.); +#230671 = EDGE_CURVE('',#230672,#230674,#230676,.T.); +#230672 = VERTEX_POINT('',#230673); +#230673 = CARTESIAN_POINT('',(187.62415,-54.3656,1.585)); +#230674 = VERTEX_POINT('',#230675); +#230675 = CARTESIAN_POINT('',(187.68415,-54.3056,1.585)); +#230676 = CIRCLE('',#230677,5.999932016262E-02); +#230677 = AXIS2_PLACEMENT_3D('',#230678,#230679,#230680); +#230678 = CARTESIAN_POINT('',(187.68414932015,-54.36559932015,1.585)); +#230679 = DIRECTION('',(0.,0.,-1.)); +#230680 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#230681 = ORIENTED_EDGE('',*,*,#230682,.T.); +#230682 = EDGE_CURVE('',#230674,#230683,#230685,.T.); +#230683 = VERTEX_POINT('',#230684); +#230684 = CARTESIAN_POINT('',(189.88415,-54.3056,1.585)); +#230685 = LINE('',#230686,#230687); +#230686 = CARTESIAN_POINT('',(187.68415,-54.3056,1.585)); +#230687 = VECTOR('',#230688,1.); +#230688 = DIRECTION('',(1.,0.,0.)); +#230689 = ORIENTED_EDGE('',*,*,#230690,.T.); +#230690 = EDGE_CURVE('',#230683,#230691,#230693,.T.); +#230691 = VERTEX_POINT('',#230692); +#230692 = CARTESIAN_POINT('',(189.88415,-54.4256,1.585)); +#230693 = CIRCLE('',#230694,6.000000000043E-02); +#230694 = AXIS2_PLACEMENT_3D('',#230695,#230696,#230697); +#230695 = CARTESIAN_POINT('',(189.88415022558,-54.3656,1.585)); +#230696 = DIRECTION('',(0.,0.,-1.)); +#230697 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#230698 = ORIENTED_EDGE('',*,*,#230699,.T.); +#230699 = EDGE_CURVE('',#230691,#230700,#230702,.T.); +#230700 = VERTEX_POINT('',#230701); +#230701 = CARTESIAN_POINT('',(187.74415,-54.4256,1.585)); +#230702 = LINE('',#230703,#230704); +#230703 = CARTESIAN_POINT('',(189.88415,-54.4256,1.585)); +#230704 = VECTOR('',#230705,1.); +#230705 = DIRECTION('',(-1.,0.,0.)); +#230706 = ORIENTED_EDGE('',*,*,#230707,.T.); +#230707 = EDGE_CURVE('',#230700,#230708,#230710,.T.); +#230708 = VERTEX_POINT('',#230709); +#230709 = CARTESIAN_POINT('',(187.74415,-56.4656,1.585)); +#230710 = LINE('',#230711,#230712); +#230711 = CARTESIAN_POINT('',(187.74415,-54.4256,1.585)); +#230712 = VECTOR('',#230713,1.); +#230713 = DIRECTION('',(0.,-1.,0.)); +#230714 = ORIENTED_EDGE('',*,*,#230715,.T.); +#230715 = EDGE_CURVE('',#230708,#230716,#230718,.T.); +#230716 = VERTEX_POINT('',#230717); +#230717 = CARTESIAN_POINT('',(187.62415,-56.4656,1.585)); +#230718 = CIRCLE('',#230719,6.000000000042E-02); +#230719 = AXIS2_PLACEMENT_3D('',#230720,#230721,#230722); +#230720 = CARTESIAN_POINT('',(187.68415,-56.46560022558,1.585)); +#230721 = DIRECTION('',(0.,0.,-1.)); +#230722 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#230723 = ORIENTED_EDGE('',*,*,#230724,.T.); +#230724 = EDGE_CURVE('',#230716,#230672,#230725,.T.); +#230725 = LINE('',#230726,#230727); +#230726 = CARTESIAN_POINT('',(187.62415,-56.4656,1.585)); +#230727 = VECTOR('',#230728,1.); +#230728 = DIRECTION('',(0.,1.,0.)); +#230729 = PLANE('',#230730); +#230730 = AXIS2_PLACEMENT_3D('',#230731,#230732,#230733); +#230731 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230732 = DIRECTION('',(0.,0.,1.)); +#230733 = DIRECTION('',(1.,0.,-0.)); +#230734 = SHELL_BASED_SURFACE_MODEL('',(#230735)); +#230735 = OPEN_SHELL('',(#230736)); +#230736 = ADVANCED_FACE('',(#230737),#230911,.T.); +#230737 = FACE_BOUND('',#230738,.F.); +#230738 = EDGE_LOOP('',(#230739,#230750,#230758,#230766,#230774,#230782, + #230790,#230799,#230807,#230815,#230824,#230832,#230840,#230849, + #230857,#230865,#230873,#230881,#230889,#230897,#230905)); +#230739 = ORIENTED_EDGE('',*,*,#230740,.T.); +#230740 = EDGE_CURVE('',#230741,#230743,#230745,.T.); +#230741 = VERTEX_POINT('',#230742); +#230742 = CARTESIAN_POINT('',(159.119101,-55.99284,1.585)); +#230743 = VERTEX_POINT('',#230744); +#230744 = CARTESIAN_POINT('',(159.235769,-56.0552,1.585)); +#230745 = CIRCLE('',#230746,7.500000000003E-02); +#230746 = AXIS2_PLACEMENT_3D('',#230747,#230748,#230749); +#230747 = CARTESIAN_POINT('',(159.160769,-56.05520006555,1.585)); +#230748 = DIRECTION('',(0.,0.,-1.)); +#230749 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#230750 = ORIENTED_EDGE('',*,*,#230751,.T.); +#230751 = EDGE_CURVE('',#230743,#230752,#230754,.T.); +#230752 = VERTEX_POINT('',#230753); +#230753 = CARTESIAN_POINT('',(159.235769,-56.132733,1.585)); +#230754 = LINE('',#230755,#230756); +#230755 = CARTESIAN_POINT('',(159.235769,-56.0552,1.585)); +#230756 = VECTOR('',#230757,1.); +#230757 = DIRECTION('',(0.,-1.,0.)); +#230758 = ORIENTED_EDGE('',*,*,#230759,.T.); +#230759 = EDGE_CURVE('',#230752,#230760,#230762,.T.); +#230760 = VERTEX_POINT('',#230761); +#230761 = CARTESIAN_POINT('',(159.264289,-56.189774,1.585)); +#230762 = LINE('',#230763,#230764); +#230763 = CARTESIAN_POINT('',(159.235769,-56.132733,1.585)); +#230764 = VECTOR('',#230765,1.); +#230765 = DIRECTION('',(0.447207323296,-0.894430327074,0.)); +#230766 = ORIENTED_EDGE('',*,*,#230767,.T.); +#230767 = EDGE_CURVE('',#230760,#230768,#230770,.T.); +#230768 = VERTEX_POINT('',#230769); +#230769 = CARTESIAN_POINT('',(159.321331,-56.218295,1.585)); +#230770 = LINE('',#230771,#230772); +#230771 = CARTESIAN_POINT('',(159.264289,-56.189774,1.585)); +#230772 = VECTOR('',#230773,1.); +#230773 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#230774 = ORIENTED_EDGE('',*,*,#230775,.T.); +#230775 = EDGE_CURVE('',#230768,#230776,#230778,.T.); +#230776 = VERTEX_POINT('',#230777); +#230777 = CARTESIAN_POINT('',(159.419102,-56.218295,1.585)); +#230778 = LINE('',#230779,#230780); +#230779 = CARTESIAN_POINT('',(159.321331,-56.218295,1.585)); +#230780 = VECTOR('',#230781,1.); +#230781 = DIRECTION('',(1.,0.,0.)); +#230782 = ORIENTED_EDGE('',*,*,#230783,.T.); +#230783 = EDGE_CURVE('',#230776,#230784,#230786,.T.); +#230784 = VERTEX_POINT('',#230785); +#230785 = CARTESIAN_POINT('',(159.420543,-56.040568,1.585)); +#230786 = LINE('',#230787,#230788); +#230787 = CARTESIAN_POINT('',(159.419102,-56.218295,1.585)); +#230788 = VECTOR('',#230789,1.); +#230789 = DIRECTION('',(8.107674340974E-03,0.999967132268,0.)); +#230790 = ORIENTED_EDGE('',*,*,#230791,.T.); +#230791 = EDGE_CURVE('',#230784,#230792,#230794,.T.); +#230792 = VERTEX_POINT('',#230793); +#230793 = CARTESIAN_POINT('',(159.569102,-56.0552,1.585)); +#230794 = CIRCLE('',#230795,7.500006711463E-02); +#230795 = AXIS2_PLACEMENT_3D('',#230796,#230797,#230798); +#230796 = CARTESIAN_POINT('',(159.49410193288,-56.05519993288,1.585)); +#230797 = DIRECTION('',(0.,0.,-1.)); +#230798 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#230799 = ORIENTED_EDGE('',*,*,#230800,.T.); +#230800 = EDGE_CURVE('',#230792,#230801,#230803,.T.); +#230801 = VERTEX_POINT('',#230802); +#230802 = CARTESIAN_POINT('',(159.569102,-56.218295,1.585)); +#230803 = LINE('',#230804,#230805); +#230804 = CARTESIAN_POINT('',(159.569102,-56.0552,1.585)); +#230805 = VECTOR('',#230806,1.); +#230806 = DIRECTION('',(0.,-1.,0.)); +#230807 = ORIENTED_EDGE('',*,*,#230808,.T.); +#230808 = EDGE_CURVE('',#230801,#230809,#230811,.T.); +#230809 = VERTEX_POINT('',#230810); +#230810 = CARTESIAN_POINT('',(160.175401,-56.219736,1.585)); +#230811 = LINE('',#230812,#230813); +#230812 = CARTESIAN_POINT('',(159.569102,-56.218295,1.585)); +#230813 = VECTOR('',#230814,1.); +#230814 = DIRECTION('',(0.999997175625,-2.376708406372E-03,0.)); +#230815 = ORIENTED_EDGE('',*,*,#230816,.T.); +#230816 = EDGE_CURVE('',#230809,#230817,#230819,.T.); +#230817 = VERTEX_POINT('',#230818); +#230818 = CARTESIAN_POINT('',(160.160769,-56.368295,1.585)); +#230819 = CIRCLE('',#230820,7.500006711465E-02); +#230820 = AXIS2_PLACEMENT_3D('',#230821,#230822,#230823); +#230821 = CARTESIAN_POINT('',(160.16076906711,-56.29329493288,1.585)); +#230822 = DIRECTION('',(0.,0.,-1.)); +#230823 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#230824 = ORIENTED_EDGE('',*,*,#230825,.T.); +#230825 = EDGE_CURVE('',#230817,#230826,#230828,.T.); +#230826 = VERTEX_POINT('',#230827); +#230827 = CARTESIAN_POINT('',(159.569102,-56.368295,1.585)); +#230828 = LINE('',#230829,#230830); +#230829 = CARTESIAN_POINT('',(160.160769,-56.368295,1.585)); +#230830 = VECTOR('',#230831,1.); +#230831 = DIRECTION('',(-1.,0.,0.)); +#230832 = ORIENTED_EDGE('',*,*,#230833,.T.); +#230833 = EDGE_CURVE('',#230826,#230834,#230836,.T.); +#230834 = VERTEX_POINT('',#230835); +#230835 = CARTESIAN_POINT('',(159.567661,-56.450784,1.585)); +#230836 = LINE('',#230837,#230838); +#230837 = CARTESIAN_POINT('',(159.569102,-56.368295,1.585)); +#230838 = VECTOR('',#230839,1.); +#230839 = DIRECTION('',(-1.746633100582E-02,-0.999847452005,0.)); +#230840 = ORIENTED_EDGE('',*,*,#230841,.T.); +#230841 = EDGE_CURVE('',#230834,#230842,#230844,.T.); +#230842 = VERTEX_POINT('',#230843); +#230843 = CARTESIAN_POINT('',(159.419102,-56.436152,1.585)); +#230844 = CIRCLE('',#230845,7.500006711463E-02); +#230845 = AXIS2_PLACEMENT_3D('',#230846,#230847,#230848); +#230846 = CARTESIAN_POINT('',(159.49410206711,-56.43615206711,1.585)); +#230847 = DIRECTION('',(-0.,0.,-1.)); +#230848 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#230849 = ORIENTED_EDGE('',*,*,#230850,.T.); +#230850 = EDGE_CURVE('',#230842,#230851,#230853,.T.); +#230851 = VERTEX_POINT('',#230852); +#230852 = CARTESIAN_POINT('',(159.419102,-56.368295,1.585)); +#230853 = LINE('',#230854,#230855); +#230854 = CARTESIAN_POINT('',(159.419102,-56.436152,1.585)); +#230855 = VECTOR('',#230856,1.); +#230856 = DIRECTION('',(0.,1.,0.)); +#230857 = ORIENTED_EDGE('',*,*,#230858,.T.); +#230858 = EDGE_CURVE('',#230851,#230859,#230861,.T.); +#230859 = VERTEX_POINT('',#230860); +#230860 = CARTESIAN_POINT('',(159.283816,-56.365632,1.585)); +#230861 = LINE('',#230862,#230863); +#230862 = CARTESIAN_POINT('',(159.419102,-56.368295,1.585)); +#230863 = VECTOR('',#230864,1.); +#230864 = DIRECTION('',(-0.999806321934,1.968041212923E-02,0.)); +#230865 = ORIENTED_EDGE('',*,*,#230866,.T.); +#230866 = EDGE_CURVE('',#230859,#230867,#230869,.T.); +#230867 = VERTEX_POINT('',#230868); +#230868 = CARTESIAN_POINT('',(159.162404,-56.304926,1.585)); +#230869 = LINE('',#230870,#230871); +#230870 = CARTESIAN_POINT('',(159.283816,-56.365632,1.585)); +#230871 = VECTOR('',#230872,1.); +#230872 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#230873 = ORIENTED_EDGE('',*,*,#230874,.T.); +#230874 = EDGE_CURVE('',#230867,#230875,#230877,.T.); +#230875 = VERTEX_POINT('',#230876); +#230876 = CARTESIAN_POINT('',(159.141306,-56.279217,1.585)); +#230877 = LINE('',#230878,#230879); +#230878 = CARTESIAN_POINT('',(159.162404,-56.304926,1.585)); +#230879 = VECTOR('',#230880,1.); +#230880 = DIRECTION('',(-0.634378352792,0.773022706982,0.)); +#230881 = ORIENTED_EDGE('',*,*,#230882,.T.); +#230882 = EDGE_CURVE('',#230875,#230883,#230885,.T.); +#230883 = VERTEX_POINT('',#230884); +#230884 = CARTESIAN_POINT('',(159.08721,-56.16507,1.585)); +#230885 = LINE('',#230886,#230887); +#230886 = CARTESIAN_POINT('',(159.141306,-56.279217,1.585)); +#230887 = VECTOR('',#230888,1.); +#230888 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#230889 = ORIENTED_EDGE('',*,*,#230890,.T.); +#230890 = EDGE_CURVE('',#230883,#230891,#230893,.T.); +#230891 = VERTEX_POINT('',#230892); +#230892 = CARTESIAN_POINT('',(159.08721,-56.040568,1.585)); +#230893 = LINE('',#230894,#230895); +#230894 = CARTESIAN_POINT('',(159.08721,-56.16507,1.585)); +#230895 = VECTOR('',#230896,1.); +#230896 = DIRECTION('',(0.,1.,0.)); +#230897 = ORIENTED_EDGE('',*,*,#230898,.T.); +#230898 = EDGE_CURVE('',#230891,#230899,#230901,.T.); +#230899 = VERTEX_POINT('',#230900); +#230900 = CARTESIAN_POINT('',(159.098409,-56.013532,1.585)); +#230901 = LINE('',#230902,#230903); +#230902 = CARTESIAN_POINT('',(159.08721,-56.040568,1.585)); +#230903 = VECTOR('',#230904,1.); +#230904 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230905 = ORIENTED_EDGE('',*,*,#230906,.T.); +#230906 = EDGE_CURVE('',#230899,#230741,#230907,.T.); +#230907 = LINE('',#230908,#230909); +#230908 = CARTESIAN_POINT('',(159.098409,-56.013532,1.585)); +#230909 = VECTOR('',#230910,1.); +#230910 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#230911 = PLANE('',#230912); +#230912 = AXIS2_PLACEMENT_3D('',#230913,#230914,#230915); +#230913 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230914 = DIRECTION('',(0.,0.,1.)); +#230915 = DIRECTION('',(1.,0.,-0.)); +#230916 = SHELL_BASED_SURFACE_MODEL('',(#230917)); +#230917 = OPEN_SHELL('',(#230918)); +#230918 = ADVANCED_FACE('',(#230919),#230980,.T.); +#230919 = FACE_BOUND('',#230920,.F.); +#230920 = EDGE_LOOP('',(#230921,#230932,#230940,#230949,#230957,#230965, + #230974)); +#230921 = ORIENTED_EDGE('',*,*,#230922,.T.); +#230922 = EDGE_CURVE('',#230923,#230925,#230927,.T.); +#230923 = VERTEX_POINT('',#230924); +#230924 = CARTESIAN_POINT('',(105.80165,-54.9931,1.585)); +#230925 = VERTEX_POINT('',#230926); +#230926 = CARTESIAN_POINT('',(105.86165,-54.9331,1.585)); +#230927 = CIRCLE('',#230928,5.999932016262E-02); +#230928 = AXIS2_PLACEMENT_3D('',#230929,#230930,#230931); +#230929 = CARTESIAN_POINT('',(105.86164932015,-54.99309932015,1.585)); +#230930 = DIRECTION('',(0.,0.,-1.)); +#230931 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#230932 = ORIENTED_EDGE('',*,*,#230933,.T.); +#230933 = EDGE_CURVE('',#230925,#230934,#230936,.T.); +#230934 = VERTEX_POINT('',#230935); +#230935 = CARTESIAN_POINT('',(107.19165,-54.9331,1.585)); +#230936 = LINE('',#230937,#230938); +#230937 = CARTESIAN_POINT('',(105.86165,-54.9331,1.585)); +#230938 = VECTOR('',#230939,1.); +#230939 = DIRECTION('',(1.,0.,0.)); +#230940 = ORIENTED_EDGE('',*,*,#230941,.T.); +#230941 = EDGE_CURVE('',#230934,#230942,#230944,.T.); +#230942 = VERTEX_POINT('',#230943); +#230943 = CARTESIAN_POINT('',(107.19165,-55.0531,1.585)); +#230944 = CIRCLE('',#230945,6.000000000042E-02); +#230945 = AXIS2_PLACEMENT_3D('',#230946,#230947,#230948); +#230946 = CARTESIAN_POINT('',(107.19165022558,-54.9931,1.585)); +#230947 = DIRECTION('',(0.,0.,-1.)); +#230948 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#230949 = ORIENTED_EDGE('',*,*,#230950,.T.); +#230950 = EDGE_CURVE('',#230942,#230951,#230953,.T.); +#230951 = VERTEX_POINT('',#230952); +#230952 = CARTESIAN_POINT('',(105.92165,-55.0531,1.585)); +#230953 = LINE('',#230954,#230955); +#230954 = CARTESIAN_POINT('',(107.19165,-55.0531,1.585)); +#230955 = VECTOR('',#230956,1.); +#230956 = DIRECTION('',(-1.,0.,0.)); +#230957 = ORIENTED_EDGE('',*,*,#230958,.T.); +#230958 = EDGE_CURVE('',#230951,#230959,#230961,.T.); +#230959 = VERTEX_POINT('',#230960); +#230960 = CARTESIAN_POINT('',(105.92165,-56.3231,1.585)); +#230961 = LINE('',#230962,#230963); +#230962 = CARTESIAN_POINT('',(105.92165,-55.0531,1.585)); +#230963 = VECTOR('',#230964,1.); +#230964 = DIRECTION('',(0.,-1.,0.)); +#230965 = ORIENTED_EDGE('',*,*,#230966,.T.); +#230966 = EDGE_CURVE('',#230959,#230967,#230969,.T.); +#230967 = VERTEX_POINT('',#230968); +#230968 = CARTESIAN_POINT('',(105.80165,-56.3231,1.585)); +#230969 = CIRCLE('',#230970,6.000000000043E-02); +#230970 = AXIS2_PLACEMENT_3D('',#230971,#230972,#230973); +#230971 = CARTESIAN_POINT('',(105.86165,-56.32310022558,1.585)); +#230972 = DIRECTION('',(0.,0.,-1.)); +#230973 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#230974 = ORIENTED_EDGE('',*,*,#230975,.T.); +#230975 = EDGE_CURVE('',#230967,#230923,#230976,.T.); +#230976 = LINE('',#230977,#230978); +#230977 = CARTESIAN_POINT('',(105.80165,-56.3231,1.585)); +#230978 = VECTOR('',#230979,1.); +#230979 = DIRECTION('',(0.,1.,0.)); +#230980 = PLANE('',#230981); +#230981 = AXIS2_PLACEMENT_3D('',#230982,#230983,#230984); +#230982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230983 = DIRECTION('',(0.,0.,1.)); +#230984 = DIRECTION('',(1.,0.,-0.)); +#230985 = SHELL_BASED_SURFACE_MODEL('',(#230986)); +#230986 = OPEN_SHELL('',(#230987)); +#230987 = ADVANCED_FACE('',(#230988),#231122,.T.); +#230988 = FACE_BOUND('',#230989,.F.); +#230989 = EDGE_LOOP('',(#230990,#231001,#231009,#231018,#231026,#231034, + #231042,#231050,#231059,#231067,#231075,#231083,#231092,#231100, + #231108,#231116)); +#230990 = ORIENTED_EDGE('',*,*,#230991,.T.); +#230991 = EDGE_CURVE('',#230992,#230994,#230996,.T.); +#230992 = VERTEX_POINT('',#230993); +#230993 = CARTESIAN_POINT('',(104.834801,-55.594073,1.585)); +#230994 = VERTEX_POINT('',#230995); +#230995 = CARTESIAN_POINT('',(104.951469,-55.656433,1.585)); +#230996 = CIRCLE('',#230997,7.500000000003E-02); +#230997 = AXIS2_PLACEMENT_3D('',#230998,#230999,#231000); +#230998 = CARTESIAN_POINT('',(104.876469,-55.65643306555,1.585)); +#230999 = DIRECTION('',(0.,0.,-1.)); +#231000 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#231001 = ORIENTED_EDGE('',*,*,#231002,.T.); +#231002 = EDGE_CURVE('',#230994,#231003,#231005,.T.); +#231003 = VERTEX_POINT('',#231004); +#231004 = CARTESIAN_POINT('',(104.950028,-56.242493,1.585)); +#231005 = LINE('',#231006,#231007); +#231006 = CARTESIAN_POINT('',(104.951469,-55.656433,1.585)); +#231007 = VECTOR('',#231008,1.); +#231008 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#231009 = ORIENTED_EDGE('',*,*,#231010,.T.); +#231010 = EDGE_CURVE('',#231003,#231011,#231013,.T.); +#231011 = VERTEX_POINT('',#231012); +#231012 = CARTESIAN_POINT('',(104.801469,-56.227861,1.585)); +#231013 = CIRCLE('',#231014,7.500006711465E-02); +#231014 = AXIS2_PLACEMENT_3D('',#231015,#231016,#231017); +#231015 = CARTESIAN_POINT('',(104.87646906711,-56.22786106711,1.585)); +#231016 = DIRECTION('',(-0.,0.,-1.)); +#231017 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#231018 = ORIENTED_EDGE('',*,*,#231019,.T.); +#231019 = EDGE_CURVE('',#231011,#231020,#231022,.T.); +#231020 = VERTEX_POINT('',#231021); +#231021 = CARTESIAN_POINT('',(104.801469,-56.017147,1.585)); +#231022 = LINE('',#231023,#231024); +#231023 = CARTESIAN_POINT('',(104.801469,-56.227861,1.585)); +#231024 = VECTOR('',#231025,1.); +#231025 = DIRECTION('',(0.,1.,0.)); +#231026 = ORIENTED_EDGE('',*,*,#231027,.T.); +#231027 = EDGE_CURVE('',#231020,#231028,#231030,.T.); +#231028 = VERTEX_POINT('',#231029); +#231029 = CARTESIAN_POINT('',(104.105154,-56.017147,1.585)); +#231030 = LINE('',#231031,#231032); +#231031 = CARTESIAN_POINT('',(104.801469,-56.017147,1.585)); +#231032 = VECTOR('',#231033,1.); +#231033 = DIRECTION('',(-1.,0.,0.)); +#231034 = ORIENTED_EDGE('',*,*,#231035,.T.); +#231035 = EDGE_CURVE('',#231028,#231036,#231038,.T.); +#231036 = VERTEX_POINT('',#231037); +#231037 = CARTESIAN_POINT('',(104.177683,-56.092787,1.585)); +#231038 = LINE('',#231039,#231040); +#231039 = CARTESIAN_POINT('',(104.105154,-56.017147,1.585)); +#231040 = VECTOR('',#231041,1.); +#231041 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#231042 = ORIENTED_EDGE('',*,*,#231043,.T.); +#231043 = EDGE_CURVE('',#231036,#231044,#231046,.T.); +#231044 = VERTEX_POINT('',#231045); +#231045 = CARTESIAN_POINT('',(104.23452,-56.208051,1.585)); +#231046 = LINE('',#231047,#231048); +#231047 = CARTESIAN_POINT('',(104.177683,-56.092787,1.585)); +#231048 = VECTOR('',#231049,1.); +#231049 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#231050 = ORIENTED_EDGE('',*,*,#231051,.T.); +#231051 = EDGE_CURVE('',#231044,#231052,#231054,.T.); +#231052 = VERTEX_POINT('',#231053); +#231053 = CARTESIAN_POINT('',(104.095101,-56.261402,1.585)); +#231054 = CIRCLE('',#231055,7.500029440469E-02); +#231055 = AXIS2_PLACEMENT_3D('',#231056,#231057,#231058); +#231056 = CARTESIAN_POINT('',(104.16218305397,-56.22786035132,1.585)); +#231057 = DIRECTION('',(0.,0.,-1.)); +#231058 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#231059 = ORIENTED_EDGE('',*,*,#231060,.T.); +#231060 = EDGE_CURVE('',#231052,#231061,#231063,.T.); +#231061 = VERTEX_POINT('',#231062); +#231062 = CARTESIAN_POINT('',(104.052925,-56.17705,1.585)); +#231063 = LINE('',#231064,#231065); +#231064 = CARTESIAN_POINT('',(104.095101,-56.261402,1.585)); +#231065 = VECTOR('',#231066,1.); +#231066 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#231067 = ORIENTED_EDGE('',*,*,#231068,.T.); +#231068 = EDGE_CURVE('',#231061,#231069,#231071,.T.); +#231069 = VERTEX_POINT('',#231070); +#231070 = CARTESIAN_POINT('',(103.971544,-56.095669,1.585)); +#231071 = LINE('',#231072,#231073); +#231072 = CARTESIAN_POINT('',(104.052925,-56.17705,1.585)); +#231073 = VECTOR('',#231074,1.); +#231074 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#231075 = ORIENTED_EDGE('',*,*,#231076,.T.); +#231076 = EDGE_CURVE('',#231069,#231077,#231079,.T.); +#231077 = VERTEX_POINT('',#231078); +#231078 = CARTESIAN_POINT('',(103.823491,-55.995235,1.585)); +#231079 = LINE('',#231080,#231081); +#231080 = CARTESIAN_POINT('',(103.971544,-56.095669,1.585)); +#231081 = VECTOR('',#231082,1.); +#231082 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#231083 = ORIENTED_EDGE('',*,*,#231084,.T.); +#231084 = EDGE_CURVE('',#231077,#231085,#231087,.T.); +#231085 = VERTEX_POINT('',#231086); +#231086 = CARTESIAN_POINT('',(103.876469,-55.867147,1.585)); +#231087 = CIRCLE('',#231088,7.499993751708E-02); +#231088 = AXIS2_PLACEMENT_3D('',#231089,#231090,#231091); +#231089 = CARTESIAN_POINT('',(103.87646880902,-55.94214693751,1.585)); +#231090 = DIRECTION('',(0.,0.,-1.)); +#231091 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#231092 = ORIENTED_EDGE('',*,*,#231093,.T.); +#231093 = EDGE_CURVE('',#231085,#231094,#231096,.T.); +#231094 = VERTEX_POINT('',#231095); +#231095 = CARTESIAN_POINT('',(104.801469,-55.867147,1.585)); +#231096 = LINE('',#231097,#231098); +#231097 = CARTESIAN_POINT('',(103.876469,-55.867147,1.585)); +#231098 = VECTOR('',#231099,1.); +#231099 = DIRECTION('',(1.,0.,0.)); +#231100 = ORIENTED_EDGE('',*,*,#231101,.T.); +#231101 = EDGE_CURVE('',#231094,#231102,#231104,.T.); +#231102 = VERTEX_POINT('',#231103); +#231103 = CARTESIAN_POINT('',(104.80291,-55.641801,1.585)); +#231104 = LINE('',#231105,#231106); +#231105 = CARTESIAN_POINT('',(104.801469,-55.867147,1.585)); +#231106 = VECTOR('',#231107,1.); +#231107 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#231108 = ORIENTED_EDGE('',*,*,#231109,.T.); +#231109 = EDGE_CURVE('',#231102,#231110,#231112,.T.); +#231110 = VERTEX_POINT('',#231111); +#231111 = CARTESIAN_POINT('',(104.814109,-55.614765,1.585)); +#231112 = LINE('',#231113,#231114); +#231113 = CARTESIAN_POINT('',(104.80291,-55.641801,1.585)); +#231114 = VECTOR('',#231115,1.); +#231115 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#231116 = ORIENTED_EDGE('',*,*,#231117,.T.); +#231117 = EDGE_CURVE('',#231110,#230992,#231118,.T.); +#231118 = LINE('',#231119,#231120); +#231119 = CARTESIAN_POINT('',(104.814109,-55.614765,1.585)); +#231120 = VECTOR('',#231121,1.); +#231121 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#231122 = PLANE('',#231123); +#231123 = AXIS2_PLACEMENT_3D('',#231124,#231125,#231126); +#231124 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231125 = DIRECTION('',(0.,0.,1.)); +#231126 = DIRECTION('',(1.,0.,-0.)); +#231127 = SHELL_BASED_SURFACE_MODEL('',(#231128)); +#231128 = OPEN_SHELL('',(#231129)); +#231129 = ADVANCED_FACE('',(#231130),#231315,.T.); +#231130 = FACE_BOUND('',#231131,.F.); +#231131 = EDGE_LOOP('',(#231132,#231143,#231151,#231160,#231168,#231177, + #231185,#231193,#231201,#231210,#231218,#231227,#231235,#231244, + #231252,#231260,#231268,#231276,#231284,#231292,#231300,#231309)); +#231132 = ORIENTED_EDGE('',*,*,#231133,.T.); +#231133 = EDGE_CURVE('',#231134,#231136,#231138,.T.); +#231134 = VERTEX_POINT('',#231135); +#231135 = CARTESIAN_POINT('',(176.780039,-55.101216,1.585)); +#231136 = VERTEX_POINT('',#231137); +#231137 = CARTESIAN_POINT('',(176.87474,-55.216609,1.585)); +#231138 = CIRCLE('',#231139,7.500003178656E-02); +#231139 = AXIS2_PLACEMENT_3D('',#231140,#231141,#231142); +#231140 = CARTESIAN_POINT('',(176.8217065,-55.16357643787,1.585)); +#231141 = DIRECTION('',(0.,0.,-1.)); +#231142 = DIRECTION('',(-0.555566431206,0.83147215258,0.)); +#231143 = ORIENTED_EDGE('',*,*,#231144,.T.); +#231144 = EDGE_CURVE('',#231136,#231145,#231147,.T.); +#231145 = VERTEX_POINT('',#231146); +#231146 = CARTESIAN_POINT('',(176.83964,-55.251708,1.585)); +#231147 = LINE('',#231148,#231149); +#231148 = CARTESIAN_POINT('',(176.87474,-55.216609,1.585)); +#231149 = VECTOR('',#231150,1.); +#231150 = DIRECTION('',(-0.707116854004,-0.707096708225,0.)); +#231151 = ORIENTED_EDGE('',*,*,#231152,.T.); +#231152 = EDGE_CURVE('',#231145,#231153,#231155,.T.); +#231153 = VERTEX_POINT('',#231154); +#231154 = CARTESIAN_POINT('',(176.83964,-55.551633,1.585)); +#231155 = CIRCLE('',#231156,0.299310989749); +#231156 = AXIS2_PLACEMENT_3D('',#231157,#231158,#231159); +#231157 = CARTESIAN_POINT('',(177.09867342868,-55.4016705,1.585)); +#231158 = DIRECTION('',(0.,0.,1.)); +#231159 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#231160 = ORIENTED_EDGE('',*,*,#231161,.T.); +#231161 = EDGE_CURVE('',#231153,#231162,#231164,.T.); +#231162 = VERTEX_POINT('',#231163); +#231163 = CARTESIAN_POINT('',(176.913753,-55.625746,1.585)); +#231164 = LINE('',#231165,#231166); +#231165 = CARTESIAN_POINT('',(176.83964,-55.551633,1.585)); +#231166 = VECTOR('',#231167,1.); +#231167 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#231168 = ORIENTED_EDGE('',*,*,#231169,.T.); +#231169 = EDGE_CURVE('',#231162,#231170,#231172,.T.); +#231170 = VERTEX_POINT('',#231171); +#231171 = CARTESIAN_POINT('',(177.288663,-55.707623,1.585)); +#231172 = CIRCLE('',#231173,0.611738044646); +#231173 = AXIS2_PLACEMENT_3D('',#231174,#231175,#231176); +#231174 = CARTESIAN_POINT('',(177.22514337395,-55.09919166256,1.585)); +#231175 = DIRECTION('',(0.,0.,1.)); +#231176 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#231177 = ORIENTED_EDGE('',*,*,#231178,.T.); +#231178 = EDGE_CURVE('',#231170,#231179,#231181,.T.); +#231179 = VERTEX_POINT('',#231180); +#231180 = CARTESIAN_POINT('',(177.462197,-55.664239,1.585)); +#231181 = LINE('',#231182,#231183); +#231182 = CARTESIAN_POINT('',(177.288663,-55.707623,1.585)); +#231183 = VECTOR('',#231184,1.); +#231184 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#231185 = ORIENTED_EDGE('',*,*,#231186,.T.); +#231186 = EDGE_CURVE('',#231179,#231187,#231189,.T.); +#231187 = VERTEX_POINT('',#231188); +#231188 = CARTESIAN_POINT('',(177.539184,-55.625745,1.585)); +#231189 = LINE('',#231190,#231191); +#231190 = CARTESIAN_POINT('',(177.462197,-55.664239,1.585)); +#231191 = VECTOR('',#231192,1.); +#231192 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#231193 = ORIENTED_EDGE('',*,*,#231194,.T.); +#231194 = EDGE_CURVE('',#231187,#231195,#231197,.T.); +#231195 = VERTEX_POINT('',#231196); +#231196 = CARTESIAN_POINT('',(177.613298,-55.551632,1.585)); +#231197 = LINE('',#231198,#231199); +#231198 = CARTESIAN_POINT('',(177.539184,-55.625745,1.585)); +#231199 = VECTOR('',#231200,1.); +#231200 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#231201 = ORIENTED_EDGE('',*,*,#231202,.T.); +#231202 = EDGE_CURVE('',#231195,#231203,#231205,.T.); +#231203 = VERTEX_POINT('',#231204); +#231204 = CARTESIAN_POINT('',(177.613298,-55.251709,1.585)); +#231205 = CIRCLE('',#231206,0.299306284995); +#231206 = AXIS2_PLACEMENT_3D('',#231207,#231208,#231209); +#231207 = CARTESIAN_POINT('',(177.35426942868,-55.4016705,1.585)); +#231208 = DIRECTION('',(0.,-0.,1.)); +#231209 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#231210 = ORIENTED_EDGE('',*,*,#231211,.T.); +#231211 = EDGE_CURVE('',#231203,#231212,#231214,.T.); +#231212 = VERTEX_POINT('',#231213); +#231213 = CARTESIAN_POINT('',(177.56887,-55.205244,1.585)); +#231214 = LINE('',#231215,#231216); +#231215 = CARTESIAN_POINT('',(177.613298,-55.251709,1.585)); +#231216 = VECTOR('',#231217,1.); +#231217 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#231218 = ORIENTED_EDGE('',*,*,#231219,.T.); +#231219 = EDGE_CURVE('',#231212,#231220,#231222,.T.); +#231220 = VERTEX_POINT('',#231221); +#231221 = CARTESIAN_POINT('',(177.684262,-55.110542,1.585)); +#231222 = CIRCLE('',#231223,7.499993690526E-02); +#231223 = AXIS2_PLACEMENT_3D('',#231224,#231225,#231226); +#231224 = CARTESIAN_POINT('',(177.63122982375,-55.16357575169,1.585)); +#231225 = DIRECTION('',(0.,0.,-1.)); +#231226 = DIRECTION('',(-0.831465016204,-0.555577111505,-0.)); +#231227 = ORIENTED_EDGE('',*,*,#231228,.T.); +#231228 = EDGE_CURVE('',#231220,#231229,#231231,.T.); +#231229 = VERTEX_POINT('',#231230); +#231230 = CARTESIAN_POINT('',(177.744007,-55.174052,1.585)); +#231231 = LINE('',#231232,#231233); +#231232 = CARTESIAN_POINT('',(177.684262,-55.110542,1.585)); +#231233 = VECTOR('',#231234,1.); +#231234 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#231235 = ORIENTED_EDGE('',*,*,#231236,.T.); +#231236 = EDGE_CURVE('',#231229,#231237,#231239,.T.); +#231237 = VERTEX_POINT('',#231238); +#231238 = CARTESIAN_POINT('',(177.741211,-55.633815,1.585)); +#231239 = CIRCLE('',#231240,0.461068563463); +#231240 = AXIS2_PLACEMENT_3D('',#231241,#231242,#231243); +#231241 = CARTESIAN_POINT('',(177.34294557362,-55.40150298919,1.585)); +#231242 = DIRECTION('',(0.,0.,-1.)); +#231243 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#231244 = ORIENTED_EDGE('',*,*,#231245,.T.); +#231245 = EDGE_CURVE('',#231237,#231246,#231248,.T.); +#231246 = VERTEX_POINT('',#231247); +#231247 = CARTESIAN_POINT('',(177.623448,-55.750503,1.585)); +#231248 = LINE('',#231249,#231250); +#231249 = CARTESIAN_POINT('',(177.741211,-55.633815,1.585)); +#231250 = VECTOR('',#231251,1.); +#231251 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#231252 = ORIENTED_EDGE('',*,*,#231253,.T.); +#231253 = EDGE_CURVE('',#231246,#231254,#231256,.T.); +#231254 = VERTEX_POINT('',#231255); +#231255 = CARTESIAN_POINT('',(177.506563,-55.807765,1.585)); +#231256 = LINE('',#231257,#231258); +#231257 = CARTESIAN_POINT('',(177.623448,-55.750503,1.585)); +#231258 = VECTOR('',#231259,1.); +#231259 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#231260 = ORIENTED_EDGE('',*,*,#231261,.T.); +#231261 = EDGE_CURVE('',#231254,#231262,#231264,.T.); +#231262 = VERTEX_POINT('',#231263); +#231263 = CARTESIAN_POINT('',(177.297897,-55.857623,1.585)); +#231264 = LINE('',#231265,#231266); +#231265 = CARTESIAN_POINT('',(177.506563,-55.807765,1.585)); +#231266 = VECTOR('',#231267,1.); +#231267 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#231268 = ORIENTED_EDGE('',*,*,#231269,.T.); +#231269 = EDGE_CURVE('',#231262,#231270,#231272,.T.); +#231270 = VERTEX_POINT('',#231271); +#231271 = CARTESIAN_POINT('',(177.13685,-55.855384,1.585)); +#231272 = LINE('',#231273,#231274); +#231273 = CARTESIAN_POINT('',(177.297897,-55.857623,1.585)); +#231274 = VECTOR('',#231275,1.); +#231275 = DIRECTION('',(-0.999903370449,1.390143030563E-02,0.)); +#231276 = ORIENTED_EDGE('',*,*,#231277,.T.); +#231277 = EDGE_CURVE('',#231270,#231278,#231280,.T.); +#231278 = VERTEX_POINT('',#231279); +#231279 = CARTESIAN_POINT('',(176.931023,-55.802086,1.585)); +#231280 = LINE('',#231281,#231282); +#231281 = CARTESIAN_POINT('',(177.13685,-55.855384,1.585)); +#231282 = VECTOR('',#231283,1.); +#231283 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#231284 = ORIENTED_EDGE('',*,*,#231285,.T.); +#231285 = EDGE_CURVE('',#231278,#231286,#231288,.T.); +#231286 = VERTEX_POINT('',#231287); +#231287 = CARTESIAN_POINT('',(176.822043,-55.745138,1.585)); +#231288 = LINE('',#231289,#231290); +#231289 = CARTESIAN_POINT('',(176.931023,-55.802086,1.585)); +#231290 = VECTOR('',#231291,1.); +#231291 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#231292 = ORIENTED_EDGE('',*,*,#231293,.T.); +#231293 = EDGE_CURVE('',#231286,#231294,#231296,.T.); +#231294 = VERTEX_POINT('',#231295); +#231295 = CARTESIAN_POINT('',(176.708931,-55.629289,1.585)); +#231296 = LINE('',#231297,#231298); +#231297 = CARTESIAN_POINT('',(176.822043,-55.745138,1.585)); +#231298 = VECTOR('',#231299,1.); +#231299 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#231300 = ORIENTED_EDGE('',*,*,#231301,.T.); +#231301 = EDGE_CURVE('',#231294,#231302,#231304,.T.); +#231302 = VERTEX_POINT('',#231303); +#231303 = CARTESIAN_POINT('',(176.711728,-55.169527,1.585)); +#231304 = CIRCLE('',#231305,0.461058290907); +#231305 = AXIS2_PLACEMENT_3D('',#231306,#231307,#231308); +#231306 = CARTESIAN_POINT('',(177.10998135644,-55.40183931499,1.585)); +#231307 = DIRECTION('',(0.,0.,-1.)); +#231308 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#231309 = ORIENTED_EDGE('',*,*,#231310,.T.); +#231310 = EDGE_CURVE('',#231302,#231134,#231311,.T.); +#231311 = LINE('',#231312,#231313); +#231312 = CARTESIAN_POINT('',(176.711728,-55.169527,1.585)); +#231313 = VECTOR('',#231314,1.); +#231314 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#231315 = PLANE('',#231316); +#231316 = AXIS2_PLACEMENT_3D('',#231317,#231318,#231319); +#231317 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231318 = DIRECTION('',(0.,0.,1.)); +#231319 = DIRECTION('',(1.,0.,-0.)); +#231320 = SHELL_BASED_SURFACE_MODEL('',(#231321)); +#231321 = OPEN_SHELL('',(#231322)); +#231322 = ADVANCED_FACE('',(#231323),#231367,.T.); +#231323 = FACE_BOUND('',#231324,.F.); +#231324 = EDGE_LOOP('',(#231325,#231336,#231344,#231353,#231361)); +#231325 = ORIENTED_EDGE('',*,*,#231326,.T.); +#231326 = EDGE_CURVE('',#231327,#231329,#231331,.T.); +#231327 = VERTEX_POINT('',#231328); +#231328 = CARTESIAN_POINT('',(160.558017,-55.294981,1.585)); +#231329 = VERTEX_POINT('',#231330); +#231330 = CARTESIAN_POINT('',(160.67345,-55.317942,1.585)); +#231331 = CIRCLE('',#231332,6.000007318647E-02); +#231332 = AXIS2_PLACEMENT_3D('',#231333,#231334,#231335); +#231333 = CARTESIAN_POINT('',(160.61344992681,-55.31794182331,1.585)); +#231334 = DIRECTION('',(0.,0.,-1.)); +#231335 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#231336 = ORIENTED_EDGE('',*,*,#231337,.T.); +#231337 = EDGE_CURVE('',#231329,#231338,#231340,.T.); +#231338 = VERTEX_POINT('',#231339); +#231339 = CARTESIAN_POINT('',(160.67345,-55.792458,1.585)); +#231340 = LINE('',#231341,#231342); +#231341 = CARTESIAN_POINT('',(160.67345,-55.317942,1.585)); +#231342 = VECTOR('',#231343,1.); +#231343 = DIRECTION('',(0.,-1.,0.)); +#231344 = ORIENTED_EDGE('',*,*,#231345,.T.); +#231345 = EDGE_CURVE('',#231338,#231346,#231348,.T.); +#231346 = VERTEX_POINT('',#231347); +#231347 = CARTESIAN_POINT('',(160.55345,-55.792458,1.585)); +#231348 = CIRCLE('',#231349,6.000000000043E-02); +#231349 = AXIS2_PLACEMENT_3D('',#231350,#231351,#231352); +#231350 = CARTESIAN_POINT('',(160.61345,-55.79245822558,1.585)); +#231351 = DIRECTION('',(0.,0.,-1.)); +#231352 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#231353 = ORIENTED_EDGE('',*,*,#231354,.T.); +#231354 = EDGE_CURVE('',#231346,#231355,#231357,.T.); +#231355 = VERTEX_POINT('',#231356); +#231356 = CARTESIAN_POINT('',(160.55345,-55.317942,1.585)); +#231357 = LINE('',#231358,#231359); +#231358 = CARTESIAN_POINT('',(160.55345,-55.792458,1.585)); +#231359 = VECTOR('',#231360,1.); +#231360 = DIRECTION('',(0.,1.,0.)); +#231361 = ORIENTED_EDGE('',*,*,#231362,.T.); +#231362 = EDGE_CURVE('',#231355,#231327,#231363,.T.); +#231363 = LINE('',#231364,#231365); +#231364 = CARTESIAN_POINT('',(160.55345,-55.317942,1.585)); +#231365 = VECTOR('',#231366,1.); +#231366 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#231367 = PLANE('',#231368); +#231368 = AXIS2_PLACEMENT_3D('',#231369,#231370,#231371); +#231369 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231370 = DIRECTION('',(0.,0.,1.)); +#231371 = DIRECTION('',(1.,0.,-0.)); +#231372 = SHELL_BASED_SURFACE_MODEL('',(#231373)); +#231373 = OPEN_SHELL('',(#231374)); +#231374 = ADVANCED_FACE('',(#231375),#231419,.T.); +#231375 = FACE_BOUND('',#231376,.F.); +#231376 = EDGE_LOOP('',(#231377,#231388,#231396,#231405,#231413)); +#231377 = ORIENTED_EDGE('',*,*,#231378,.T.); +#231378 = EDGE_CURVE('',#231379,#231381,#231383,.T.); +#231379 = VERTEX_POINT('',#231380); +#231380 = CARTESIAN_POINT('',(161.603017,-55.294981,1.585)); +#231381 = VERTEX_POINT('',#231382); +#231382 = CARTESIAN_POINT('',(161.71845,-55.317942,1.585)); +#231383 = CIRCLE('',#231384,6.000007318647E-02); +#231384 = AXIS2_PLACEMENT_3D('',#231385,#231386,#231387); +#231385 = CARTESIAN_POINT('',(161.65844992681,-55.31794182331,1.585)); +#231386 = DIRECTION('',(0.,0.,-1.)); +#231387 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#231388 = ORIENTED_EDGE('',*,*,#231389,.T.); +#231389 = EDGE_CURVE('',#231381,#231390,#231392,.T.); +#231390 = VERTEX_POINT('',#231391); +#231391 = CARTESIAN_POINT('',(161.71845,-55.792458,1.585)); +#231392 = LINE('',#231393,#231394); +#231393 = CARTESIAN_POINT('',(161.71845,-55.317942,1.585)); +#231394 = VECTOR('',#231395,1.); +#231395 = DIRECTION('',(0.,-1.,0.)); +#231396 = ORIENTED_EDGE('',*,*,#231397,.T.); +#231397 = EDGE_CURVE('',#231390,#231398,#231400,.T.); +#231398 = VERTEX_POINT('',#231399); +#231399 = CARTESIAN_POINT('',(161.59845,-55.792458,1.585)); +#231400 = CIRCLE('',#231401,6.000000000042E-02); +#231401 = AXIS2_PLACEMENT_3D('',#231402,#231403,#231404); +#231402 = CARTESIAN_POINT('',(161.65845,-55.79245822558,1.585)); +#231403 = DIRECTION('',(0.,0.,-1.)); +#231404 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#231405 = ORIENTED_EDGE('',*,*,#231406,.T.); +#231406 = EDGE_CURVE('',#231398,#231407,#231409,.T.); +#231407 = VERTEX_POINT('',#231408); +#231408 = CARTESIAN_POINT('',(161.59845,-55.317942,1.585)); +#231409 = LINE('',#231410,#231411); +#231410 = CARTESIAN_POINT('',(161.59845,-55.792458,1.585)); +#231411 = VECTOR('',#231412,1.); +#231412 = DIRECTION('',(0.,1.,0.)); +#231413 = ORIENTED_EDGE('',*,*,#231414,.T.); +#231414 = EDGE_CURVE('',#231407,#231379,#231415,.T.); +#231415 = LINE('',#231416,#231417); +#231416 = CARTESIAN_POINT('',(161.59845,-55.317942,1.585)); +#231417 = VECTOR('',#231418,1.); +#231418 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#231419 = PLANE('',#231420); +#231420 = AXIS2_PLACEMENT_3D('',#231421,#231422,#231423); +#231421 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231422 = DIRECTION('',(0.,0.,1.)); +#231423 = DIRECTION('',(1.,0.,-0.)); +#231424 = SHELL_BASED_SURFACE_MODEL('',(#231425)); +#231425 = OPEN_SHELL('',(#231426)); +#231426 = ADVANCED_FACE('',(#231427),#231529,.T.); +#231427 = FACE_BOUND('',#231428,.F.); +#231428 = EDGE_LOOP('',(#231429,#231440,#231448,#231457,#231465,#231474, + #231482,#231491,#231499,#231507,#231515,#231523)); +#231429 = ORIENTED_EDGE('',*,*,#231430,.T.); +#231430 = EDGE_CURVE('',#231431,#231433,#231435,.T.); +#231431 = VERTEX_POINT('',#231432); +#231432 = CARTESIAN_POINT('',(159.452434,-55.373792,1.585)); +#231433 = VERTEX_POINT('',#231434); +#231434 = CARTESIAN_POINT('',(159.569102,-55.436152,1.585)); +#231435 = CIRCLE('',#231436,7.500000000001E-02); +#231436 = AXIS2_PLACEMENT_3D('',#231437,#231438,#231439); +#231437 = CARTESIAN_POINT('',(159.494102,-55.43615206555,1.585)); +#231438 = DIRECTION('',(0.,0.,-1.)); +#231439 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#231440 = ORIENTED_EDGE('',*,*,#231441,.T.); +#231441 = EDGE_CURVE('',#231433,#231442,#231444,.T.); +#231442 = VERTEX_POINT('',#231443); +#231443 = CARTESIAN_POINT('',(159.569102,-55.513685,1.585)); +#231444 = LINE('',#231445,#231446); +#231445 = CARTESIAN_POINT('',(159.569102,-55.436152,1.585)); +#231446 = VECTOR('',#231447,1.); +#231447 = DIRECTION('',(0.,-1.,0.)); +#231448 = ORIENTED_EDGE('',*,*,#231449,.T.); +#231449 = EDGE_CURVE('',#231442,#231450,#231452,.T.); +#231450 = VERTEX_POINT('',#231451); +#231451 = CARTESIAN_POINT('',(159.702283,-55.646866,1.585)); +#231452 = CIRCLE('',#231453,0.18686440374); +#231453 = AXIS2_PLACEMENT_3D('',#231454,#231455,#231456); +#231454 = CARTESIAN_POINT('',(159.749819,-55.466149,1.585)); +#231455 = DIRECTION('',(0.,0.,1.)); +#231456 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#231457 = ORIENTED_EDGE('',*,*,#231458,.T.); +#231458 = EDGE_CURVE('',#231450,#231459,#231461,.T.); +#231459 = VERTEX_POINT('',#231460); +#231460 = CARTESIAN_POINT('',(160.175401,-55.648307,1.585)); +#231461 = LINE('',#231462,#231463); +#231462 = CARTESIAN_POINT('',(159.702283,-55.646866,1.585)); +#231463 = VECTOR('',#231464,1.); +#231464 = DIRECTION('',(0.99999536173,-3.045737672744E-03,0.)); +#231465 = ORIENTED_EDGE('',*,*,#231466,.T.); +#231466 = EDGE_CURVE('',#231459,#231467,#231469,.T.); +#231467 = VERTEX_POINT('',#231468); +#231468 = CARTESIAN_POINT('',(160.160769,-55.796866,1.585)); +#231469 = CIRCLE('',#231470,7.500006711464E-02); +#231470 = AXIS2_PLACEMENT_3D('',#231471,#231472,#231473); +#231471 = CARTESIAN_POINT('',(160.16076906711,-55.72186593288,1.585)); +#231472 = DIRECTION('',(0.,0.,-1.)); +#231473 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#231474 = ORIENTED_EDGE('',*,*,#231475,.T.); +#231475 = EDGE_CURVE('',#231467,#231476,#231478,.T.); +#231476 = VERTEX_POINT('',#231477); +#231477 = CARTESIAN_POINT('',(159.47947,-55.795425,1.585)); +#231478 = LINE('',#231479,#231480); +#231479 = CARTESIAN_POINT('',(160.160769,-55.796866,1.585)); +#231480 = VECTOR('',#231481,1.); +#231481 = DIRECTION('',(-0.999997763232,2.115072496535E-03,0.)); +#231482 = ORIENTED_EDGE('',*,*,#231483,.T.); +#231483 = EDGE_CURVE('',#231476,#231484,#231486,.T.); +#231484 = VERTEX_POINT('',#231485); +#231485 = CARTESIAN_POINT('',(159.452434,-55.659506,1.585)); +#231486 = CIRCLE('',#231487,7.499998360397E-02); +#231487 = AXIS2_PLACEMENT_3D('',#231488,#231489,#231490); +#231488 = CARTESIAN_POINT('',(159.49410186186,-55.72186613813,1.585)); +#231489 = DIRECTION('',(0.,0.,-1.)); +#231490 = DIRECTION('',(-0.19509153419,-0.980785039286,-0.)); +#231491 = ORIENTED_EDGE('',*,*,#231492,.T.); +#231492 = EDGE_CURVE('',#231484,#231493,#231495,.T.); +#231493 = VERTEX_POINT('',#231494); +#231494 = CARTESIAN_POINT('',(159.470554,-55.652,1.585)); +#231495 = LINE('',#231496,#231497); +#231496 = CARTESIAN_POINT('',(159.452434,-55.659506,1.585)); +#231497 = VECTOR('',#231498,1.); +#231498 = DIRECTION('',(0.923871415933,0.382703026931,0.)); +#231499 = ORIENTED_EDGE('',*,*,#231500,.T.); +#231500 = EDGE_CURVE('',#231493,#231501,#231503,.T.); +#231501 = VERTEX_POINT('',#231502); +#231502 = CARTESIAN_POINT('',(159.420543,-55.546022,1.585)); +#231503 = LINE('',#231504,#231505); +#231504 = CARTESIAN_POINT('',(159.470554,-55.652,1.585)); +#231505 = VECTOR('',#231506,1.); +#231506 = DIRECTION('',(-0.426767891505,0.904361192655,0.)); +#231507 = ORIENTED_EDGE('',*,*,#231508,.T.); +#231508 = EDGE_CURVE('',#231501,#231509,#231511,.T.); +#231509 = VERTEX_POINT('',#231510); +#231510 = CARTESIAN_POINT('',(159.420543,-55.42152,1.585)); +#231511 = LINE('',#231512,#231513); +#231512 = CARTESIAN_POINT('',(159.420543,-55.546022,1.585)); +#231513 = VECTOR('',#231514,1.); +#231514 = DIRECTION('',(0.,1.,0.)); +#231515 = ORIENTED_EDGE('',*,*,#231516,.T.); +#231516 = EDGE_CURVE('',#231509,#231517,#231519,.T.); +#231517 = VERTEX_POINT('',#231518); +#231518 = CARTESIAN_POINT('',(159.431742,-55.394484,1.585)); +#231519 = LINE('',#231520,#231521); +#231520 = CARTESIAN_POINT('',(159.420543,-55.42152,1.585)); +#231521 = VECTOR('',#231522,1.); +#231522 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#231523 = ORIENTED_EDGE('',*,*,#231524,.T.); +#231524 = EDGE_CURVE('',#231517,#231431,#231525,.T.); +#231525 = LINE('',#231526,#231527); +#231526 = CARTESIAN_POINT('',(159.431742,-55.394484,1.585)); +#231527 = VECTOR('',#231528,1.); +#231528 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#231529 = PLANE('',#231530); +#231530 = AXIS2_PLACEMENT_3D('',#231531,#231532,#231533); +#231531 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231532 = DIRECTION('',(0.,0.,1.)); +#231533 = DIRECTION('',(1.,0.,-0.)); +#231534 = SHELL_BASED_SURFACE_MODEL('',(#231535)); +#231535 = OPEN_SHELL('',(#231536)); +#231536 = ADVANCED_FACE('',(#231537),#231597,.T.); +#231537 = FACE_BOUND('',#231538,.F.); +#231538 = EDGE_LOOP('',(#231539,#231550,#231558,#231566,#231574,#231582, + #231591)); +#231539 = ORIENTED_EDGE('',*,*,#231540,.T.); +#231540 = EDGE_CURVE('',#231541,#231543,#231545,.T.); +#231541 = VERTEX_POINT('',#231542); +#231542 = CARTESIAN_POINT('',(171.57665,-55.5881,1.585)); +#231543 = VERTEX_POINT('',#231544); +#231544 = CARTESIAN_POINT('',(171.528126,-55.49281,1.585)); +#231545 = CIRCLE('',#231546,6.000027696173E-02); +#231546 = AXIS2_PLACEMENT_3D('',#231547,#231548,#231549); +#231547 = CARTESIAN_POINT('',(171.57665092846,-55.52809972304,1.585)); +#231548 = DIRECTION('',(0.,0.,-1.)); +#231549 = DIRECTION('',(-1.547440111751E-05,-0.99999999988,-0.)); +#231550 = ORIENTED_EDGE('',*,*,#231551,.T.); +#231551 = EDGE_CURVE('',#231543,#231552,#231554,.T.); +#231552 = VERTEX_POINT('',#231553); +#231553 = CARTESIAN_POINT('',(171.768126,-55.16281,1.585)); +#231554 = LINE('',#231555,#231556); +#231555 = CARTESIAN_POINT('',(171.528126,-55.49281,1.585)); +#231556 = VECTOR('',#231557,1.); +#231557 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#231558 = ORIENTED_EDGE('',*,*,#231559,.T.); +#231559 = EDGE_CURVE('',#231552,#231560,#231562,.T.); +#231560 = VERTEX_POINT('',#231561); +#231561 = CARTESIAN_POINT('',(171.807292,-55.138834,1.585)); +#231562 = LINE('',#231563,#231564); +#231563 = CARTESIAN_POINT('',(171.768126,-55.16281,1.585)); +#231564 = VECTOR('',#231565,1.); +#231565 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#231566 = ORIENTED_EDGE('',*,*,#231567,.T.); +#231567 = EDGE_CURVE('',#231560,#231568,#231570,.T.); +#231568 = VERTEX_POINT('',#231569); +#231569 = CARTESIAN_POINT('',(171.85194,-55.149576,1.585)); +#231570 = LINE('',#231571,#231572); +#231571 = CARTESIAN_POINT('',(171.807292,-55.138834,1.585)); +#231572 = VECTOR('',#231573,1.); +#231573 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#231574 = ORIENTED_EDGE('',*,*,#231575,.T.); +#231575 = EDGE_CURVE('',#231568,#231576,#231578,.T.); +#231576 = VERTEX_POINT('',#231577); +#231577 = CARTESIAN_POINT('',(172.105174,-55.49281,1.585)); +#231578 = LINE('',#231579,#231580); +#231579 = CARTESIAN_POINT('',(171.85194,-55.149576,1.585)); +#231580 = VECTOR('',#231581,1.); +#231581 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#231582 = ORIENTED_EDGE('',*,*,#231583,.T.); +#231583 = EDGE_CURVE('',#231576,#231584,#231586,.T.); +#231584 = VERTEX_POINT('',#231585); +#231585 = CARTESIAN_POINT('',(172.05665,-55.5881,1.585)); +#231586 = CIRCLE('',#231587,5.999941814204E-02); +#231587 = AXIS2_PLACEMENT_3D('',#231588,#231589,#231590); +#231588 = CARTESIAN_POINT('',(172.05665075805,-55.52810058186,1.585)); +#231589 = DIRECTION('',(0.,0.,-1.)); +#231590 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#231591 = ORIENTED_EDGE('',*,*,#231592,.T.); +#231592 = EDGE_CURVE('',#231584,#231541,#231593,.T.); +#231593 = LINE('',#231594,#231595); +#231594 = CARTESIAN_POINT('',(172.05665,-55.5881,1.585)); +#231595 = VECTOR('',#231596,1.); +#231596 = DIRECTION('',(-1.,0.,0.)); +#231597 = PLANE('',#231598); +#231598 = AXIS2_PLACEMENT_3D('',#231599,#231600,#231601); +#231599 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231600 = DIRECTION('',(0.,0.,1.)); +#231601 = DIRECTION('',(1.,0.,-0.)); +#231602 = SHELL_BASED_SURFACE_MODEL('',(#231603)); +#231603 = OPEN_SHELL('',(#231604)); +#231604 = ADVANCED_FACE('',(#231605),#231697,.T.); +#231605 = FACE_BOUND('',#231606,.F.); +#231606 = EDGE_LOOP('',(#231607,#231618,#231626,#231634,#231642,#231650, + #231658,#231666,#231674,#231683,#231691)); +#231607 = ORIENTED_EDGE('',*,*,#231608,.T.); +#231608 = EDGE_CURVE('',#231609,#231611,#231613,.T.); +#231609 = VERTEX_POINT('',#231610); +#231610 = CARTESIAN_POINT('',(167.101217,-55.170139,1.585)); +#231611 = VERTEX_POINT('',#231612); +#231612 = CARTESIAN_POINT('',(167.212083,-55.170139,1.585)); +#231613 = CIRCLE('',#231614,6.000020841632E-02); +#231614 = AXIS2_PLACEMENT_3D('',#231615,#231616,#231617); +#231615 = CARTESIAN_POINT('',(167.15665,-55.1931,1.585)); +#231616 = DIRECTION('',(0.,0.,-1.)); +#231617 = DIRECTION('',(-0.923880124139,0.382682004047,0.)); +#231618 = ORIENTED_EDGE('',*,*,#231619,.T.); +#231619 = EDGE_CURVE('',#231611,#231620,#231622,.T.); +#231620 = VERTEX_POINT('',#231621); +#231621 = CARTESIAN_POINT('',(167.21665,-55.2281,1.585)); +#231622 = LINE('',#231623,#231624); +#231623 = CARTESIAN_POINT('',(167.212083,-55.170139,1.585)); +#231624 = VECTOR('',#231625,1.); +#231625 = DIRECTION('',(7.855089539687E-02,-0.99691010469,0.)); +#231626 = ORIENTED_EDGE('',*,*,#231627,.T.); +#231627 = EDGE_CURVE('',#231620,#231628,#231630,.T.); +#231628 = VERTEX_POINT('',#231629); +#231629 = CARTESIAN_POINT('',(170.253224,-55.2281,1.585)); +#231630 = LINE('',#231631,#231632); +#231631 = CARTESIAN_POINT('',(167.21665,-55.2281,1.585)); +#231632 = VECTOR('',#231633,1.); +#231633 = DIRECTION('',(1.,0.,0.)); +#231634 = ORIENTED_EDGE('',*,*,#231635,.T.); +#231635 = EDGE_CURVE('',#231628,#231636,#231638,.T.); +#231636 = VERTEX_POINT('',#231637); +#231637 = CARTESIAN_POINT('',(170.229614,-55.23788,1.585)); +#231638 = LINE('',#231639,#231640); +#231639 = CARTESIAN_POINT('',(170.253224,-55.2281,1.585)); +#231640 = VECTOR('',#231641,1.); +#231641 = DIRECTION('',(-0.923873752348,-0.382697386615,0.)); +#231642 = ORIENTED_EDGE('',*,*,#231643,.T.); +#231643 = EDGE_CURVE('',#231636,#231644,#231646,.T.); +#231644 = VERTEX_POINT('',#231645); +#231645 = CARTESIAN_POINT('',(170.18823,-55.279264,1.585)); +#231646 = LINE('',#231647,#231648); +#231647 = CARTESIAN_POINT('',(170.229614,-55.23788,1.585)); +#231648 = VECTOR('',#231649,1.); +#231649 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#231650 = ORIENTED_EDGE('',*,*,#231651,.T.); +#231651 = EDGE_CURVE('',#231644,#231652,#231654,.T.); +#231652 = VERTEX_POINT('',#231653); +#231653 = CARTESIAN_POINT('',(170.165832,-55.333336,1.585)); +#231654 = LINE('',#231655,#231656); +#231655 = CARTESIAN_POINT('',(170.18823,-55.279264,1.585)); +#231656 = VECTOR('',#231657,1.); +#231657 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231658 = ORIENTED_EDGE('',*,*,#231659,.T.); +#231659 = EDGE_CURVE('',#231652,#231660,#231662,.T.); +#231660 = VERTEX_POINT('',#231661); +#231661 = CARTESIAN_POINT('',(170.165832,-55.3481,1.585)); +#231662 = LINE('',#231663,#231664); +#231663 = CARTESIAN_POINT('',(170.165832,-55.333336,1.585)); +#231664 = VECTOR('',#231665,1.); +#231665 = DIRECTION('',(0.,-1.,0.)); +#231666 = ORIENTED_EDGE('',*,*,#231667,.T.); +#231667 = EDGE_CURVE('',#231660,#231668,#231670,.T.); +#231668 = VERTEX_POINT('',#231669); +#231669 = CARTESIAN_POINT('',(167.15665,-55.3481,1.585)); +#231670 = LINE('',#231671,#231672); +#231671 = CARTESIAN_POINT('',(170.165832,-55.3481,1.585)); +#231672 = VECTOR('',#231673,1.); +#231673 = DIRECTION('',(-1.,0.,0.)); +#231674 = ORIENTED_EDGE('',*,*,#231675,.T.); +#231675 = EDGE_CURVE('',#231668,#231676,#231678,.T.); +#231676 = VERTEX_POINT('',#231677); +#231677 = CARTESIAN_POINT('',(167.09665,-55.2881,1.585)); +#231678 = CIRCLE('',#231679,5.999932016259E-02); +#231679 = AXIS2_PLACEMENT_3D('',#231680,#231681,#231682); +#231680 = CARTESIAN_POINT('',(167.15664932015,-55.28810067984,1.585)); +#231681 = DIRECTION('',(0.,0.,-1.)); +#231682 = DIRECTION('',(1.133081612142E-05,-0.999999999936,0.)); +#231683 = ORIENTED_EDGE('',*,*,#231684,.T.); +#231684 = EDGE_CURVE('',#231676,#231685,#231687,.T.); +#231685 = VERTEX_POINT('',#231686); +#231686 = CARTESIAN_POINT('',(167.09665,-55.1931,1.585)); +#231687 = LINE('',#231688,#231689); +#231688 = CARTESIAN_POINT('',(167.09665,-55.2881,1.585)); +#231689 = VECTOR('',#231690,1.); +#231690 = DIRECTION('',(0.,1.,0.)); +#231691 = ORIENTED_EDGE('',*,*,#231692,.T.); +#231692 = EDGE_CURVE('',#231685,#231609,#231693,.T.); +#231693 = LINE('',#231694,#231695); +#231694 = CARTESIAN_POINT('',(167.09665,-55.1931,1.585)); +#231695 = VECTOR('',#231696,1.); +#231696 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#231697 = PLANE('',#231698); +#231698 = AXIS2_PLACEMENT_3D('',#231699,#231700,#231701); +#231699 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231700 = DIRECTION('',(0.,0.,1.)); +#231701 = DIRECTION('',(1.,0.,-0.)); +#231702 = SHELL_BASED_SURFACE_MODEL('',(#231703)); +#231703 = OPEN_SHELL('',(#231704)); +#231704 = ADVANCED_FACE('',(#231705),#231789,.T.); +#231705 = FACE_BOUND('',#231706,.F.); +#231706 = EDGE_LOOP('',(#231707,#231718,#231726,#231735,#231743,#231751, + #231759,#231767,#231775,#231783)); +#231707 = ORIENTED_EDGE('',*,*,#231708,.T.); +#231708 = EDGE_CURVE('',#231709,#231711,#231713,.T.); +#231709 = VERTEX_POINT('',#231710); +#231710 = CARTESIAN_POINT('',(171.221217,-55.170139,1.585)); +#231711 = VERTEX_POINT('',#231712); +#231712 = CARTESIAN_POINT('',(171.33665,-55.1931,1.585)); +#231713 = CIRCLE('',#231714,6.000007318647E-02); +#231714 = AXIS2_PLACEMENT_3D('',#231715,#231716,#231717); +#231715 = CARTESIAN_POINT('',(171.27664992681,-55.19309982331,1.585)); +#231716 = DIRECTION('',(0.,0.,-1.)); +#231717 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#231718 = ORIENTED_EDGE('',*,*,#231719,.T.); +#231719 = EDGE_CURVE('',#231711,#231720,#231722,.T.); +#231720 = VERTEX_POINT('',#231721); +#231721 = CARTESIAN_POINT('',(171.33665,-55.2881,1.585)); +#231722 = LINE('',#231723,#231724); +#231723 = CARTESIAN_POINT('',(171.33665,-55.1931,1.585)); +#231724 = VECTOR('',#231725,1.); +#231725 = DIRECTION('',(0.,-1.,0.)); +#231726 = ORIENTED_EDGE('',*,*,#231727,.T.); +#231727 = EDGE_CURVE('',#231720,#231728,#231730,.T.); +#231728 = VERTEX_POINT('',#231729); +#231729 = CARTESIAN_POINT('',(171.27665,-55.3481,1.585)); +#231730 = CIRCLE('',#231731,5.999932016253E-02); +#231731 = AXIS2_PLACEMENT_3D('',#231732,#231733,#231734); +#231732 = CARTESIAN_POINT('',(171.27665067984,-55.28810067984,1.585)); +#231733 = DIRECTION('',(0.,0.,-1.)); +#231734 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#231735 = ORIENTED_EDGE('',*,*,#231736,.T.); +#231736 = EDGE_CURVE('',#231728,#231737,#231739,.T.); +#231737 = VERTEX_POINT('',#231738); +#231738 = CARTESIAN_POINT('',(170.460068,-55.3481,1.585)); +#231739 = LINE('',#231740,#231741); +#231740 = CARTESIAN_POINT('',(171.27665,-55.3481,1.585)); +#231741 = VECTOR('',#231742,1.); +#231742 = DIRECTION('',(-1.,0.,0.)); +#231743 = ORIENTED_EDGE('',*,*,#231744,.T.); +#231744 = EDGE_CURVE('',#231737,#231745,#231747,.T.); +#231745 = VERTEX_POINT('',#231746); +#231746 = CARTESIAN_POINT('',(170.460068,-55.333336,1.585)); +#231747 = LINE('',#231748,#231749); +#231748 = CARTESIAN_POINT('',(170.460068,-55.3481,1.585)); +#231749 = VECTOR('',#231750,1.); +#231750 = DIRECTION('',(0.,1.,0.)); +#231751 = ORIENTED_EDGE('',*,*,#231752,.T.); +#231752 = EDGE_CURVE('',#231745,#231753,#231755,.T.); +#231753 = VERTEX_POINT('',#231754); +#231754 = CARTESIAN_POINT('',(170.43767,-55.279264,1.585)); +#231755 = LINE('',#231756,#231757); +#231756 = CARTESIAN_POINT('',(170.460068,-55.333336,1.585)); +#231757 = VECTOR('',#231758,1.); +#231758 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#231759 = ORIENTED_EDGE('',*,*,#231760,.T.); +#231760 = EDGE_CURVE('',#231753,#231761,#231763,.T.); +#231761 = VERTEX_POINT('',#231762); +#231762 = CARTESIAN_POINT('',(170.396286,-55.23788,1.585)); +#231763 = LINE('',#231764,#231765); +#231764 = CARTESIAN_POINT('',(170.43767,-55.279264,1.585)); +#231765 = VECTOR('',#231766,1.); +#231766 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#231767 = ORIENTED_EDGE('',*,*,#231768,.T.); +#231768 = EDGE_CURVE('',#231761,#231769,#231771,.T.); +#231769 = VERTEX_POINT('',#231770); +#231770 = CARTESIAN_POINT('',(170.372676,-55.2281,1.585)); +#231771 = LINE('',#231772,#231773); +#231772 = CARTESIAN_POINT('',(170.396286,-55.23788,1.585)); +#231773 = VECTOR('',#231774,1.); +#231774 = DIRECTION('',(-0.923873752348,0.382697386615,0.)); +#231775 = ORIENTED_EDGE('',*,*,#231776,.T.); +#231776 = EDGE_CURVE('',#231769,#231777,#231779,.T.); +#231777 = VERTEX_POINT('',#231778); +#231778 = CARTESIAN_POINT('',(171.21665,-55.2281,1.585)); +#231779 = LINE('',#231780,#231781); +#231780 = CARTESIAN_POINT('',(170.372676,-55.2281,1.585)); +#231781 = VECTOR('',#231782,1.); +#231782 = DIRECTION('',(1.,0.,0.)); +#231783 = ORIENTED_EDGE('',*,*,#231784,.T.); +#231784 = EDGE_CURVE('',#231777,#231709,#231785,.T.); +#231785 = LINE('',#231786,#231787); +#231786 = CARTESIAN_POINT('',(171.21665,-55.2281,1.585)); +#231787 = VECTOR('',#231788,1.); +#231788 = DIRECTION('',(7.855089539736E-02,0.99691010469,0.)); +#231789 = PLANE('',#231790); +#231790 = AXIS2_PLACEMENT_3D('',#231791,#231792,#231793); +#231791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231792 = DIRECTION('',(0.,0.,1.)); +#231793 = DIRECTION('',(1.,0.,-0.)); +#231794 = SHELL_BASED_SURFACE_MODEL('',(#231795)); +#231795 = OPEN_SHELL('',(#231796)); +#231796 = ADVANCED_FACE('',(#231797,#231969),#232020,.T.); +#231797 = FACE_BOUND('',#231798,.F.); +#231798 = EDGE_LOOP('',(#231799,#231809,#231817,#231825,#231833,#231841, + #231849,#231857,#231865,#231873,#231881,#231890,#231898,#231906, + #231914,#231922,#231930,#231938,#231946,#231954,#231963)); +#231799 = ORIENTED_EDGE('',*,*,#231800,.T.); +#231800 = EDGE_CURVE('',#231801,#231803,#231805,.T.); +#231801 = VERTEX_POINT('',#231802); +#231802 = CARTESIAN_POINT('',(159.50818,-54.654784,1.585)); +#231803 = VERTEX_POINT('',#231804); +#231804 = CARTESIAN_POINT('',(159.622327,-54.600688,1.585)); +#231805 = LINE('',#231806,#231807); +#231806 = CARTESIAN_POINT('',(159.50818,-54.654784,1.585)); +#231807 = VECTOR('',#231808,1.); +#231808 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#231809 = ORIENTED_EDGE('',*,*,#231810,.T.); +#231810 = EDGE_CURVE('',#231803,#231811,#231813,.T.); +#231811 = VERTEX_POINT('',#231812); +#231812 = CARTESIAN_POINT('',(159.746829,-54.600688,1.585)); +#231813 = LINE('',#231814,#231815); +#231814 = CARTESIAN_POINT('',(159.622327,-54.600688,1.585)); +#231815 = VECTOR('',#231816,1.); +#231816 = DIRECTION('',(1.,0.,0.)); +#231817 = ORIENTED_EDGE('',*,*,#231818,.T.); +#231818 = EDGE_CURVE('',#231811,#231819,#231821,.T.); +#231819 = VERTEX_POINT('',#231820); +#231820 = CARTESIAN_POINT('',(159.785174,-54.621158,1.585)); +#231821 = LINE('',#231822,#231823); +#231822 = CARTESIAN_POINT('',(159.746829,-54.600688,1.585)); +#231823 = VECTOR('',#231824,1.); +#231824 = DIRECTION('',(0.882168187729,-0.47093448436,0.)); +#231825 = ORIENTED_EDGE('',*,*,#231826,.T.); +#231826 = EDGE_CURVE('',#231819,#231827,#231829,.T.); +#231827 = VERTEX_POINT('',#231828); +#231828 = CARTESIAN_POINT('',(159.805741,-54.659538,1.585)); +#231829 = LINE('',#231830,#231831); +#231830 = CARTESIAN_POINT('',(159.785174,-54.621158,1.585)); +#231831 = VECTOR('',#231832,1.); +#231832 = DIRECTION('',(0.472333573703,-0.881419874494,0.)); +#231833 = ORIENTED_EDGE('',*,*,#231834,.T.); +#231834 = EDGE_CURVE('',#231827,#231835,#231837,.T.); +#231835 = VERTEX_POINT('',#231836); +#231836 = CARTESIAN_POINT('',(159.88892,-55.075437,1.585)); +#231837 = LINE('',#231838,#231839); +#231838 = CARTESIAN_POINT('',(159.805741,-54.659538,1.585)); +#231839 = VECTOR('',#231840,1.); +#231840 = DIRECTION('',(0.196114321493,-0.980581038418,0.)); +#231841 = ORIENTED_EDGE('',*,*,#231842,.T.); +#231842 = EDGE_CURVE('',#231835,#231843,#231845,.T.); +#231843 = VERTEX_POINT('',#231844); +#231844 = CARTESIAN_POINT('',(160.000206,-55.075437,1.585)); +#231845 = LINE('',#231846,#231847); +#231846 = CARTESIAN_POINT('',(159.88892,-55.075437,1.585)); +#231847 = VECTOR('',#231848,1.); +#231848 = DIRECTION('',(1.,0.,0.)); +#231849 = ORIENTED_EDGE('',*,*,#231850,.T.); +#231850 = EDGE_CURVE('',#231843,#231851,#231853,.T.); +#231851 = VERTEX_POINT('',#231852); +#231852 = CARTESIAN_POINT('',(160.057248,-55.046916,1.585)); +#231853 = LINE('',#231854,#231855); +#231854 = CARTESIAN_POINT('',(160.000206,-55.075437,1.585)); +#231855 = VECTOR('',#231856,1.); +#231856 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#231857 = ORIENTED_EDGE('',*,*,#231858,.T.); +#231858 = EDGE_CURVE('',#231851,#231859,#231861,.T.); +#231859 = VERTEX_POINT('',#231860); +#231860 = CARTESIAN_POINT('',(160.085769,-54.989875,1.585)); +#231861 = LINE('',#231862,#231863); +#231862 = CARTESIAN_POINT('',(160.057248,-55.046916,1.585)); +#231863 = VECTOR('',#231864,1.); +#231864 = DIRECTION('',(0.447219867638,0.894424054904,0.)); +#231865 = ORIENTED_EDGE('',*,*,#231866,.T.); +#231866 = EDGE_CURVE('',#231859,#231867,#231869,.T.); +#231867 = VERTEX_POINT('',#231868); +#231868 = CARTESIAN_POINT('',(160.085769,-54.834809,1.585)); +#231869 = LINE('',#231870,#231871); +#231870 = CARTESIAN_POINT('',(160.085769,-54.989875,1.585)); +#231871 = VECTOR('',#231872,1.); +#231872 = DIRECTION('',(0.,1.,0.)); +#231873 = ORIENTED_EDGE('',*,*,#231874,.T.); +#231874 = EDGE_CURVE('',#231867,#231875,#231877,.T.); +#231875 = VERTEX_POINT('',#231876); +#231876 = CARTESIAN_POINT('',(160.040813,-54.741675,1.585)); +#231877 = LINE('',#231878,#231879); +#231878 = CARTESIAN_POINT('',(160.085769,-54.834809,1.585)); +#231879 = VECTOR('',#231880,1.); +#231880 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#231881 = ORIENTED_EDGE('',*,*,#231882,.T.); +#231882 = EDGE_CURVE('',#231875,#231883,#231885,.T.); +#231883 = VERTEX_POINT('',#231884); +#231884 = CARTESIAN_POINT('',(160.180232,-54.688325,1.585)); +#231885 = CIRCLE('',#231886,7.50000527236E-02); +#231886 = AXIS2_PLACEMENT_3D('',#231887,#231888,#231889); +#231887 = CARTESIAN_POINT('',(160.11314967027,-54.72186555676,1.585)); +#231888 = DIRECTION('',(0.,0.,-1.)); +#231889 = DIRECTION('',(-0.964488259036,-0.264125724196,-0.)); +#231890 = ORIENTED_EDGE('',*,*,#231891,.T.); +#231891 = EDGE_CURVE('',#231883,#231892,#231894,.T.); +#231892 = VERTEX_POINT('',#231893); +#231893 = CARTESIAN_POINT('',(160.234328,-54.802472,1.585)); +#231894 = LINE('',#231895,#231896); +#231895 = CARTESIAN_POINT('',(160.180232,-54.688325,1.585)); +#231896 = VECTOR('',#231897,1.); +#231897 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#231898 = ORIENTED_EDGE('',*,*,#231899,.T.); +#231899 = EDGE_CURVE('',#231892,#231900,#231902,.T.); +#231900 = VERTEX_POINT('',#231901); +#231901 = CARTESIAN_POINT('',(160.233106,-55.02739,1.585)); +#231902 = LINE('',#231903,#231904); +#231903 = CARTESIAN_POINT('',(160.234328,-54.802472,1.585)); +#231904 = VECTOR('',#231905,1.); +#231905 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#231906 = ORIENTED_EDGE('',*,*,#231907,.T.); +#231907 = EDGE_CURVE('',#231900,#231908,#231910,.T.); +#231908 = VERTEX_POINT('',#231909); +#231909 = CARTESIAN_POINT('',(160.1724,-55.148802,1.585)); +#231910 = LINE('',#231911,#231912); +#231911 = CARTESIAN_POINT('',(160.233106,-55.02739,1.585)); +#231912 = VECTOR('',#231913,1.); +#231913 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#231914 = ORIENTED_EDGE('',*,*,#231915,.T.); +#231915 = EDGE_CURVE('',#231908,#231916,#231918,.T.); +#231916 = VERTEX_POINT('',#231917); +#231917 = CARTESIAN_POINT('',(160.146691,-55.1699,1.585)); +#231918 = LINE('',#231919,#231920); +#231919 = CARTESIAN_POINT('',(160.1724,-55.148802,1.585)); +#231920 = VECTOR('',#231921,1.); +#231921 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#231922 = ORIENTED_EDGE('',*,*,#231923,.T.); +#231923 = EDGE_CURVE('',#231916,#231924,#231926,.T.); +#231924 = VERTEX_POINT('',#231925); +#231925 = CARTESIAN_POINT('',(160.032543,-55.223996,1.585)); +#231926 = LINE('',#231927,#231928); +#231927 = CARTESIAN_POINT('',(160.146691,-55.1699,1.585)); +#231928 = VECTOR('',#231929,1.); +#231929 = DIRECTION('',(-0.903658514584,-0.428253767082,0.)); +#231930 = ORIENTED_EDGE('',*,*,#231931,.T.); +#231931 = EDGE_CURVE('',#231924,#231932,#231934,.T.); +#231932 = VERTEX_POINT('',#231933); +#231933 = CARTESIAN_POINT('',(159.617149,-55.222774,1.585)); +#231934 = LINE('',#231935,#231936); +#231935 = CARTESIAN_POINT('',(160.032543,-55.223996,1.585)); +#231936 = VECTOR('',#231937,1.); +#231937 = DIRECTION('',(-0.999995672977,2.941772660118E-03,0.)); +#231938 = ORIENTED_EDGE('',*,*,#231939,.T.); +#231939 = EDGE_CURVE('',#231932,#231940,#231942,.T.); +#231940 = VERTEX_POINT('',#231941); +#231941 = CARTESIAN_POINT('',(159.495737,-55.162068,1.585)); +#231942 = LINE('',#231943,#231944); +#231943 = CARTESIAN_POINT('',(159.617149,-55.222774,1.585)); +#231944 = VECTOR('',#231945,1.); +#231945 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#231946 = ORIENTED_EDGE('',*,*,#231947,.T.); +#231947 = EDGE_CURVE('',#231940,#231948,#231950,.T.); +#231948 = VERTEX_POINT('',#231949); +#231949 = CARTESIAN_POINT('',(159.474639,-55.136359,1.585)); +#231950 = LINE('',#231951,#231952); +#231951 = CARTESIAN_POINT('',(159.495737,-55.162068,1.585)); +#231952 = VECTOR('',#231953,1.); +#231953 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#231954 = ORIENTED_EDGE('',*,*,#231955,.T.); +#231955 = EDGE_CURVE('',#231948,#231956,#231958,.T.); +#231956 = VERTEX_POINT('',#231957); +#231957 = CARTESIAN_POINT('',(159.482471,-54.675882,1.585)); +#231958 = CIRCLE('',#231959,0.396588066051); +#231959 = AXIS2_PLACEMENT_3D('',#231960,#231961,#231962); +#231960 = CARTESIAN_POINT('',(159.80139681991,-54.91161153893,1.585)); +#231961 = DIRECTION('',(0.,0.,-1.)); +#231962 = DIRECTION('',(-0.82392247243,-0.566702531691,-0.)); +#231963 = ORIENTED_EDGE('',*,*,#231964,.T.); +#231964 = EDGE_CURVE('',#231956,#231801,#231965,.T.); +#231965 = LINE('',#231966,#231967); +#231966 = CARTESIAN_POINT('',(159.482471,-54.675882,1.585)); +#231967 = VECTOR('',#231968,1.); +#231968 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#231969 = FACE_BOUND('',#231970,.F.); +#231970 = EDGE_LOOP('',(#231971,#231981,#231989,#231997,#232006,#232014) + ); +#231971 = ORIENTED_EDGE('',*,*,#231972,.T.); +#231972 = EDGE_CURVE('',#231973,#231975,#231977,.T.); +#231973 = VERTEX_POINT('',#231974); +#231974 = CARTESIAN_POINT('',(159.735949,-55.075437,1.585)); +#231975 = VERTEX_POINT('',#231976); +#231976 = CARTESIAN_POINT('',(159.670711,-54.749247,1.585)); +#231977 = LINE('',#231978,#231979); +#231978 = CARTESIAN_POINT('',(159.735949,-55.075437,1.585)); +#231979 = VECTOR('',#231980,1.); +#231980 = DIRECTION('',(-0.196116135138,0.980580675691,0.)); +#231981 = ORIENTED_EDGE('',*,*,#231982,.T.); +#231982 = EDGE_CURVE('',#231975,#231983,#231985,.T.); +#231983 = VERTEX_POINT('',#231984); +#231984 = CARTESIAN_POINT('',(159.654664,-54.749247,1.585)); +#231985 = LINE('',#231986,#231987); +#231986 = CARTESIAN_POINT('',(159.670711,-54.749247,1.585)); +#231987 = VECTOR('',#231988,1.); +#231988 = DIRECTION('',(-1.,0.,0.)); +#231989 = ORIENTED_EDGE('',*,*,#231990,.T.); +#231990 = EDGE_CURVE('',#231983,#231991,#231993,.T.); +#231991 = VERTEX_POINT('',#231992); +#231992 = CARTESIAN_POINT('',(159.597622,-54.777767,1.585)); +#231993 = LINE('',#231994,#231995); +#231994 = CARTESIAN_POINT('',(159.654664,-54.749247,1.585)); +#231995 = VECTOR('',#231996,1.); +#231996 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#231997 = ORIENTED_EDGE('',*,*,#231998,.T.); +#231998 = EDGE_CURVE('',#231991,#231999,#232001,.T.); +#231999 = VERTEX_POINT('',#232000); +#232000 = CARTESIAN_POINT('',(159.597622,-55.046916,1.585)); +#232001 = CIRCLE('',#232002,0.239283669194); +#232002 = AXIS2_PLACEMENT_3D('',#232003,#232004,#232005); +#232003 = CARTESIAN_POINT('',(159.79547643713,-54.9123415,1.585)); +#232004 = DIRECTION('',(0.,0.,1.)); +#232005 = DIRECTION('',(-0.826861431029,0.562405702208,0.)); +#232006 = ORIENTED_EDGE('',*,*,#232007,.T.); +#232007 = EDGE_CURVE('',#231999,#232008,#232010,.T.); +#232008 = VERTEX_POINT('',#232009); +#232009 = CARTESIAN_POINT('',(159.654664,-55.075437,1.585)); +#232010 = LINE('',#232011,#232012); +#232011 = CARTESIAN_POINT('',(159.597622,-55.046916,1.585)); +#232012 = VECTOR('',#232013,1.); +#232013 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#232014 = ORIENTED_EDGE('',*,*,#232015,.T.); +#232015 = EDGE_CURVE('',#232008,#231973,#232016,.T.); +#232016 = LINE('',#232017,#232018); +#232017 = CARTESIAN_POINT('',(159.654664,-55.075437,1.585)); +#232018 = VECTOR('',#232019,1.); +#232019 = DIRECTION('',(1.,0.,0.)); +#232020 = PLANE('',#232021); +#232021 = AXIS2_PLACEMENT_3D('',#232022,#232023,#232024); +#232022 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232023 = DIRECTION('',(0.,0.,1.)); +#232024 = DIRECTION('',(1.,0.,-0.)); +#232025 = SHELL_BASED_SURFACE_MODEL('',(#232026)); +#232026 = OPEN_SHELL('',(#232027)); +#232027 = ADVANCED_FACE('',(#232028),#232130,.T.); +#232028 = FACE_BOUND('',#232029,.F.); +#232029 = EDGE_LOOP('',(#232030,#232041,#232049,#232057,#232065,#232074, + #232082,#232090,#232099,#232107,#232116,#232124)); +#232030 = ORIENTED_EDGE('',*,*,#232031,.T.); +#232031 = EDGE_CURVE('',#232032,#232034,#232036,.T.); +#232032 = VERTEX_POINT('',#232033); +#232033 = CARTESIAN_POINT('',(147.279545,-54.396554,1.585)); +#232034 = VERTEX_POINT('',#232035); +#232035 = CARTESIAN_POINT('',(147.404597,-54.421428,1.585)); +#232036 = CIRCLE('',#232037,6.499988811647E-02); +#232037 = AXIS2_PLACEMENT_3D('',#232038,#232039,#232040); +#232038 = CARTESIAN_POINT('',(147.33959711188,-54.4214282701,1.585)); +#232039 = DIRECTION('',(0.,0.,-1.)); +#232040 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#232041 = ORIENTED_EDGE('',*,*,#232042,.T.); +#232042 = EDGE_CURVE('',#232034,#232043,#232045,.T.); +#232043 = VERTEX_POINT('',#232044); +#232044 = CARTESIAN_POINT('',(147.404597,-54.785,1.585)); +#232045 = LINE('',#232046,#232047); +#232046 = CARTESIAN_POINT('',(147.404597,-54.421428,1.585)); +#232047 = VECTOR('',#232048,1.); +#232048 = DIRECTION('',(0.,-1.,0.)); +#232049 = ORIENTED_EDGE('',*,*,#232050,.T.); +#232050 = EDGE_CURVE('',#232043,#232051,#232053,.T.); +#232051 = VERTEX_POINT('',#232052); +#232052 = CARTESIAN_POINT('',(147.703168,-54.785,1.585)); +#232053 = LINE('',#232054,#232055); +#232054 = CARTESIAN_POINT('',(147.404597,-54.785,1.585)); +#232055 = VECTOR('',#232056,1.); +#232056 = DIRECTION('',(1.,0.,0.)); +#232057 = ORIENTED_EDGE('',*,*,#232058,.T.); +#232058 = EDGE_CURVE('',#232051,#232059,#232061,.T.); +#232059 = VERTEX_POINT('',#232060); +#232060 = CARTESIAN_POINT('',(147.703168,-54.55,1.585)); +#232061 = LINE('',#232062,#232063); +#232062 = CARTESIAN_POINT('',(147.703168,-54.785,1.585)); +#232063 = VECTOR('',#232064,1.); +#232064 = DIRECTION('',(0.,1.,0.)); +#232065 = ORIENTED_EDGE('',*,*,#232066,.T.); +#232066 = EDGE_CURVE('',#232059,#232067,#232069,.T.); +#232067 = VERTEX_POINT('',#232068); +#232068 = CARTESIAN_POINT('',(147.833168,-54.55,1.585)); +#232069 = CIRCLE('',#232070,6.500000000091E-02); +#232070 = AXIS2_PLACEMENT_3D('',#232071,#232072,#232073); +#232071 = CARTESIAN_POINT('',(147.768168,-54.55000034486,1.585)); +#232072 = DIRECTION('',(0.,0.,-1.)); +#232073 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#232074 = ORIENTED_EDGE('',*,*,#232075,.T.); +#232075 = EDGE_CURVE('',#232067,#232076,#232078,.T.); +#232076 = VERTEX_POINT('',#232077); +#232077 = CARTESIAN_POINT('',(147.833168,-54.785,1.585)); +#232078 = LINE('',#232079,#232080); +#232079 = CARTESIAN_POINT('',(147.833168,-54.55,1.585)); +#232080 = VECTOR('',#232081,1.); +#232081 = DIRECTION('',(0.,-1.,0.)); +#232082 = ORIENTED_EDGE('',*,*,#232083,.T.); +#232083 = EDGE_CURVE('',#232076,#232084,#232086,.T.); +#232084 = VERTEX_POINT('',#232085); +#232085 = CARTESIAN_POINT('',(148.239597,-54.785,1.585)); +#232086 = LINE('',#232087,#232088); +#232087 = CARTESIAN_POINT('',(147.833168,-54.785,1.585)); +#232088 = VECTOR('',#232089,1.); +#232089 = DIRECTION('',(1.,0.,0.)); +#232090 = ORIENTED_EDGE('',*,*,#232091,.T.); +#232091 = EDGE_CURVE('',#232084,#232092,#232094,.T.); +#232092 = VERTEX_POINT('',#232093); +#232093 = CARTESIAN_POINT('',(148.239597,-54.915,1.585)); +#232094 = CIRCLE('',#232095,6.500000000092E-02); +#232095 = AXIS2_PLACEMENT_3D('',#232096,#232097,#232098); +#232096 = CARTESIAN_POINT('',(148.23959665513,-54.85,1.585)); +#232097 = DIRECTION('',(0.,0.,-1.)); +#232098 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#232099 = ORIENTED_EDGE('',*,*,#232100,.T.); +#232100 = EDGE_CURVE('',#232092,#232101,#232103,.T.); +#232101 = VERTEX_POINT('',#232102); +#232102 = CARTESIAN_POINT('',(147.339597,-54.915,1.585)); +#232103 = LINE('',#232104,#232105); +#232104 = CARTESIAN_POINT('',(148.239597,-54.915,1.585)); +#232105 = VECTOR('',#232106,1.); +#232106 = DIRECTION('',(-1.,0.,0.)); +#232107 = ORIENTED_EDGE('',*,*,#232108,.T.); +#232108 = EDGE_CURVE('',#232101,#232109,#232111,.T.); +#232109 = VERTEX_POINT('',#232110); +#232110 = CARTESIAN_POINT('',(147.274597,-54.85,1.585)); +#232111 = CIRCLE('',#232112,6.500103935387E-02); +#232112 = AXIS2_PLACEMENT_3D('',#232113,#232114,#232115); +#232113 = CARTESIAN_POINT('',(147.33959803934,-54.84999896065,1.585)); +#232114 = DIRECTION('',(0.,0.,-1.)); +#232115 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#232116 = ORIENTED_EDGE('',*,*,#232117,.T.); +#232117 = EDGE_CURVE('',#232109,#232118,#232120,.T.); +#232118 = VERTEX_POINT('',#232119); +#232119 = CARTESIAN_POINT('',(147.274597,-54.421428,1.585)); +#232120 = LINE('',#232121,#232122); +#232121 = CARTESIAN_POINT('',(147.274597,-54.85,1.585)); +#232122 = VECTOR('',#232123,1.); +#232123 = DIRECTION('',(0.,1.,0.)); +#232124 = ORIENTED_EDGE('',*,*,#232125,.T.); +#232125 = EDGE_CURVE('',#232118,#232032,#232126,.T.); +#232126 = LINE('',#232127,#232128); +#232127 = CARTESIAN_POINT('',(147.274597,-54.421428,1.585)); +#232128 = VECTOR('',#232129,1.); +#232129 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#232130 = PLANE('',#232131); +#232131 = AXIS2_PLACEMENT_3D('',#232132,#232133,#232134); +#232132 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232133 = DIRECTION('',(0.,0.,1.)); +#232134 = DIRECTION('',(1.,0.,-0.)); +#232135 = SHELL_BASED_SURFACE_MODEL('',(#232136)); +#232136 = OPEN_SHELL('',(#232137)); +#232137 = ADVANCED_FACE('',(#232138),#232274,.T.); +#232138 = FACE_BOUND('',#232139,.F.); +#232139 = EDGE_LOOP('',(#232140,#232150,#232159,#232167,#232176,#232184, + #232192,#232201,#232209,#232217,#232226,#232234,#232243,#232251, + #232259,#232268)); +#232140 = ORIENTED_EDGE('',*,*,#232141,.T.); +#232141 = EDGE_CURVE('',#232142,#232144,#232146,.T.); +#232142 = VERTEX_POINT('',#232143); +#232143 = CARTESIAN_POINT('',(177.800028,-54.387039,1.585)); +#232144 = VERTEX_POINT('',#232145); +#232145 = CARTESIAN_POINT('',(177.798806,-54.611957,1.585)); +#232146 = LINE('',#232147,#232148); +#232147 = CARTESIAN_POINT('',(177.800028,-54.387039,1.585)); +#232148 = VECTOR('',#232149,1.); +#232149 = DIRECTION('',(-5.433010984414E-03,-0.999985241087,0.)); +#232150 = ORIENTED_EDGE('',*,*,#232151,.T.); +#232151 = EDGE_CURVE('',#232144,#232152,#232154,.T.); +#232152 = VERTEX_POINT('',#232153); +#232153 = CARTESIAN_POINT('',(177.550624,-54.856182,1.585)); +#232154 = CIRCLE('',#232155,0.348632713765); +#232155 = AXIS2_PLACEMENT_3D('',#232156,#232157,#232158); +#232156 = CARTESIAN_POINT('',(177.46285597394,-54.51877787627,1.585)); +#232157 = DIRECTION('',(0.,0.,-1.)); +#232158 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#232159 = ORIENTED_EDGE('',*,*,#232160,.T.); +#232160 = EDGE_CURVE('',#232152,#232161,#232163,.T.); +#232161 = VERTEX_POINT('',#232162); +#232162 = CARTESIAN_POINT('',(177.230468,-54.85496,1.585)); +#232163 = LINE('',#232164,#232165); +#232164 = CARTESIAN_POINT('',(177.550624,-54.856182,1.585)); +#232165 = VECTOR('',#232166,1.); +#232166 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#232167 = ORIENTED_EDGE('',*,*,#232168,.T.); +#232168 = EDGE_CURVE('',#232161,#232169,#232171,.T.); +#232169 = VERTEX_POINT('',#232170); +#232170 = CARTESIAN_POINT('',(176.986243,-54.606779,1.585)); +#232171 = CIRCLE('',#232172,0.348628078749); +#232172 = AXIS2_PLACEMENT_3D('',#232173,#232174,#232175); +#232173 = CARTESIAN_POINT('',(177.3236430302,-54.51901364857,1.585)); +#232174 = DIRECTION('',(0.,0.,-1.)); +#232175 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#232176 = ORIENTED_EDGE('',*,*,#232177,.T.); +#232177 = EDGE_CURVE('',#232169,#232178,#232180,.T.); +#232178 = VERTEX_POINT('',#232179); +#232179 = CARTESIAN_POINT('',(176.987465,-54.381862,1.585)); +#232180 = LINE('',#232181,#232182); +#232181 = CARTESIAN_POINT('',(176.986243,-54.606779,1.585)); +#232182 = VECTOR('',#232183,1.); +#232183 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#232184 = ORIENTED_EDGE('',*,*,#232185,.T.); +#232185 = EDGE_CURVE('',#232178,#232186,#232188,.T.); +#232186 = VERTEX_POINT('',#232187); +#232187 = CARTESIAN_POINT('',(177.048171,-54.260449,1.585)); +#232188 = LINE('',#232189,#232190); +#232189 = CARTESIAN_POINT('',(176.987465,-54.381862,1.585)); +#232190 = VECTOR('',#232191,1.); +#232191 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#232192 = ORIENTED_EDGE('',*,*,#232193,.T.); +#232193 = EDGE_CURVE('',#232186,#232194,#232196,.T.); +#232194 = VERTEX_POINT('',#232195); +#232195 = CARTESIAN_POINT('',(177.174503,-54.339974,1.585)); +#232196 = CIRCLE('',#232197,7.500029440362E-02); +#232197 = AXIS2_PLACEMENT_3D('',#232198,#232199,#232200); +#232198 = CARTESIAN_POINT('',(177.10742064867,-54.30643294602,1.585)); +#232199 = DIRECTION('',(0.,0.,-1.)); +#232200 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#232201 = ORIENTED_EDGE('',*,*,#232202,.T.); +#232202 = EDGE_CURVE('',#232194,#232203,#232205,.T.); +#232203 = VERTEX_POINT('',#232204); +#232204 = CARTESIAN_POINT('',(177.134802,-54.419376,1.585)); +#232205 = LINE('',#232206,#232207); +#232206 = CARTESIAN_POINT('',(177.174503,-54.339974,1.585)); +#232207 = VECTOR('',#232208,1.); +#232208 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#232209 = ORIENTED_EDGE('',*,*,#232210,.T.); +#232210 = EDGE_CURVE('',#232203,#232211,#232213,.T.); +#232211 = VERTEX_POINT('',#232212); +#232212 = CARTESIAN_POINT('',(177.134802,-54.574442,1.585)); +#232213 = LINE('',#232214,#232215); +#232214 = CARTESIAN_POINT('',(177.134802,-54.419376,1.585)); +#232215 = VECTOR('',#232216,1.); +#232216 = DIRECTION('',(0.,-1.,0.)); +#232217 = ORIENTED_EDGE('',*,*,#232218,.T.); +#232218 = EDGE_CURVE('',#232211,#232219,#232221,.T.); +#232219 = VERTEX_POINT('',#232220); +#232220 = CARTESIAN_POINT('',(177.267983,-54.707623,1.585)); +#232221 = CIRCLE('',#232222,0.18686440374); +#232222 = AXIS2_PLACEMENT_3D('',#232223,#232224,#232225); +#232223 = CARTESIAN_POINT('',(177.315519,-54.526906,1.585)); +#232224 = DIRECTION('',(0.,0.,1.)); +#232225 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#232226 = ORIENTED_EDGE('',*,*,#232227,.T.); +#232227 = EDGE_CURVE('',#232219,#232228,#232230,.T.); +#232228 = VERTEX_POINT('',#232229); +#232229 = CARTESIAN_POINT('',(177.518287,-54.707623,1.585)); +#232230 = LINE('',#232231,#232232); +#232231 = CARTESIAN_POINT('',(177.267983,-54.707623,1.585)); +#232232 = VECTOR('',#232233,1.); +#232233 = DIRECTION('',(1.,0.,0.)); +#232234 = ORIENTED_EDGE('',*,*,#232235,.T.); +#232235 = EDGE_CURVE('',#232228,#232236,#232238,.T.); +#232236 = VERTEX_POINT('',#232237); +#232237 = CARTESIAN_POINT('',(177.651469,-54.574442,1.585)); +#232238 = CIRCLE('',#232239,0.186872595955); +#232239 = AXIS2_PLACEMENT_3D('',#232240,#232241,#232242); +#232240 = CARTESIAN_POINT('',(177.47074536766,-54.52689901068,1.585)); +#232241 = DIRECTION('',(0.,0.,1.)); +#232242 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#232243 = ORIENTED_EDGE('',*,*,#232244,.T.); +#232244 = EDGE_CURVE('',#232236,#232245,#232247,.T.); +#232245 = VERTEX_POINT('',#232246); +#232246 = CARTESIAN_POINT('',(177.651469,-54.419376,1.585)); +#232247 = LINE('',#232248,#232249); +#232248 = CARTESIAN_POINT('',(177.651469,-54.574442,1.585)); +#232249 = VECTOR('',#232250,1.); +#232250 = DIRECTION('',(0.,1.,0.)); +#232251 = ORIENTED_EDGE('',*,*,#232252,.T.); +#232252 = EDGE_CURVE('',#232245,#232253,#232255,.T.); +#232253 = VERTEX_POINT('',#232254); +#232254 = CARTESIAN_POINT('',(177.606513,-54.326242,1.585)); +#232255 = LINE('',#232256,#232257); +#232256 = CARTESIAN_POINT('',(177.651469,-54.419376,1.585)); +#232257 = VECTOR('',#232258,1.); +#232258 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#232259 = ORIENTED_EDGE('',*,*,#232260,.T.); +#232260 = EDGE_CURVE('',#232253,#232261,#232263,.T.); +#232261 = VERTEX_POINT('',#232262); +#232262 = CARTESIAN_POINT('',(177.745932,-54.272892,1.585)); +#232263 = CIRCLE('',#232264,7.500016685596E-02); +#232264 = AXIS2_PLACEMENT_3D('',#232265,#232266,#232267); +#232265 = CARTESIAN_POINT('',(177.6788500864,-54.30643364422,1.585)); +#232266 = DIRECTION('',(0.,0.,-1.)); +#232267 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#232268 = ORIENTED_EDGE('',*,*,#232269,.T.); +#232269 = EDGE_CURVE('',#232261,#232142,#232270,.T.); +#232270 = LINE('',#232271,#232272); +#232271 = CARTESIAN_POINT('',(177.745932,-54.272892,1.585)); +#232272 = VECTOR('',#232273,1.); +#232273 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#232274 = PLANE('',#232275); +#232275 = AXIS2_PLACEMENT_3D('',#232276,#232277,#232278); +#232276 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232277 = DIRECTION('',(0.,0.,1.)); +#232278 = DIRECTION('',(1.,0.,-0.)); +#232279 = SHELL_BASED_SURFACE_MODEL('',(#232280)); +#232280 = OPEN_SHELL('',(#232281)); +#232281 = ADVANCED_FACE('',(#232282),#232409,.T.); +#232282 = FACE_BOUND('',#232283,.F.); +#232283 = EDGE_LOOP('',(#232284,#232295,#232303,#232311,#232319,#232328, + #232336,#232344,#232352,#232361,#232369,#232378,#232386,#232395, + #232403)); +#232284 = ORIENTED_EDGE('',*,*,#232285,.T.); +#232285 = EDGE_CURVE('',#232286,#232288,#232290,.T.); +#232286 = VERTEX_POINT('',#232287); +#232287 = CARTESIAN_POINT('',(139.649545,-54.160839,1.585)); +#232288 = VERTEX_POINT('',#232289); +#232289 = CARTESIAN_POINT('',(139.774597,-54.185713,1.585)); +#232290 = CIRCLE('',#232291,6.499988811649E-02); +#232291 = AXIS2_PLACEMENT_3D('',#232292,#232293,#232294); +#232292 = CARTESIAN_POINT('',(139.70959711188,-54.1857132701,1.585)); +#232293 = DIRECTION('',(0.,0.,-1.)); +#232294 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#232295 = ORIENTED_EDGE('',*,*,#232296,.T.); +#232296 = EDGE_CURVE('',#232288,#232297,#232299,.T.); +#232297 = VERTEX_POINT('',#232298); +#232298 = CARTESIAN_POINT('',(139.774597,-54.549285,1.585)); +#232299 = LINE('',#232300,#232301); +#232300 = CARTESIAN_POINT('',(139.774597,-54.185713,1.585)); +#232301 = VECTOR('',#232302,1.); +#232302 = DIRECTION('',(0.,-1.,0.)); +#232303 = ORIENTED_EDGE('',*,*,#232304,.T.); +#232304 = EDGE_CURVE('',#232297,#232305,#232307,.T.); +#232305 = VERTEX_POINT('',#232306); +#232306 = CARTESIAN_POINT('',(140.073168,-54.549285,1.585)); +#232307 = LINE('',#232308,#232309); +#232308 = CARTESIAN_POINT('',(139.774597,-54.549285,1.585)); +#232309 = VECTOR('',#232310,1.); +#232310 = DIRECTION('',(1.,0.,0.)); +#232311 = ORIENTED_EDGE('',*,*,#232312,.T.); +#232312 = EDGE_CURVE('',#232305,#232313,#232315,.T.); +#232313 = VERTEX_POINT('',#232314); +#232314 = CARTESIAN_POINT('',(140.073168,-54.314285,1.585)); +#232315 = LINE('',#232316,#232317); +#232316 = CARTESIAN_POINT('',(140.073168,-54.549285,1.585)); +#232317 = VECTOR('',#232318,1.); +#232318 = DIRECTION('',(0.,1.,0.)); +#232319 = ORIENTED_EDGE('',*,*,#232320,.T.); +#232320 = EDGE_CURVE('',#232313,#232321,#232323,.T.); +#232321 = VERTEX_POINT('',#232322); +#232322 = CARTESIAN_POINT('',(140.203168,-54.314285,1.585)); +#232323 = CIRCLE('',#232324,6.500000000091E-02); +#232324 = AXIS2_PLACEMENT_3D('',#232325,#232326,#232327); +#232325 = CARTESIAN_POINT('',(140.138168,-54.31428534486,1.585)); +#232326 = DIRECTION('',(0.,0.,-1.)); +#232327 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#232328 = ORIENTED_EDGE('',*,*,#232329,.T.); +#232329 = EDGE_CURVE('',#232321,#232330,#232332,.T.); +#232330 = VERTEX_POINT('',#232331); +#232331 = CARTESIAN_POINT('',(140.203168,-54.549285,1.585)); +#232332 = LINE('',#232333,#232334); +#232333 = CARTESIAN_POINT('',(140.203168,-54.314285,1.585)); +#232334 = VECTOR('',#232335,1.); +#232335 = DIRECTION('',(0.,-1.,0.)); +#232336 = ORIENTED_EDGE('',*,*,#232337,.T.); +#232337 = EDGE_CURVE('',#232330,#232338,#232340,.T.); +#232338 = VERTEX_POINT('',#232339); +#232339 = CARTESIAN_POINT('',(140.544597,-54.549285,1.585)); +#232340 = LINE('',#232341,#232342); +#232341 = CARTESIAN_POINT('',(140.203168,-54.549285,1.585)); +#232342 = VECTOR('',#232343,1.); +#232343 = DIRECTION('',(1.,0.,0.)); +#232344 = ORIENTED_EDGE('',*,*,#232345,.T.); +#232345 = EDGE_CURVE('',#232338,#232346,#232348,.T.); +#232346 = VERTEX_POINT('',#232347); +#232347 = CARTESIAN_POINT('',(140.544597,-54.185713,1.585)); +#232348 = LINE('',#232349,#232350); +#232349 = CARTESIAN_POINT('',(140.544597,-54.549285,1.585)); +#232350 = VECTOR('',#232351,1.); +#232351 = DIRECTION('',(0.,1.,0.)); +#232352 = ORIENTED_EDGE('',*,*,#232353,.T.); +#232353 = EDGE_CURVE('',#232346,#232354,#232356,.T.); +#232354 = VERTEX_POINT('',#232355); +#232355 = CARTESIAN_POINT('',(140.674597,-54.185713,1.585)); +#232356 = CIRCLE('',#232357,6.500000000091E-02); +#232357 = AXIS2_PLACEMENT_3D('',#232358,#232359,#232360); +#232358 = CARTESIAN_POINT('',(140.609597,-54.18571334486,1.585)); +#232359 = DIRECTION('',(0.,0.,-1.)); +#232360 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#232361 = ORIENTED_EDGE('',*,*,#232362,.T.); +#232362 = EDGE_CURVE('',#232354,#232363,#232365,.T.); +#232363 = VERTEX_POINT('',#232364); +#232364 = CARTESIAN_POINT('',(140.674597,-54.614285,1.585)); +#232365 = LINE('',#232366,#232367); +#232366 = CARTESIAN_POINT('',(140.674597,-54.185713,1.585)); +#232367 = VECTOR('',#232368,1.); +#232368 = DIRECTION('',(0.,-1.,0.)); +#232369 = ORIENTED_EDGE('',*,*,#232370,.T.); +#232370 = EDGE_CURVE('',#232363,#232371,#232373,.T.); +#232371 = VERTEX_POINT('',#232372); +#232372 = CARTESIAN_POINT('',(140.609597,-54.679285,1.585)); +#232373 = CIRCLE('',#232374,6.500103935393E-02); +#232374 = AXIS2_PLACEMENT_3D('',#232375,#232376,#232377); +#232375 = CARTESIAN_POINT('',(140.60959596065,-54.61428396065,1.585)); +#232376 = DIRECTION('',(0.,0.,-1.)); +#232377 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#232378 = ORIENTED_EDGE('',*,*,#232379,.T.); +#232379 = EDGE_CURVE('',#232371,#232380,#232382,.T.); +#232380 = VERTEX_POINT('',#232381); +#232381 = CARTESIAN_POINT('',(139.709597,-54.679285,1.585)); +#232382 = LINE('',#232383,#232384); +#232383 = CARTESIAN_POINT('',(140.609597,-54.679285,1.585)); +#232384 = VECTOR('',#232385,1.); +#232385 = DIRECTION('',(-1.,0.,0.)); +#232386 = ORIENTED_EDGE('',*,*,#232387,.T.); +#232387 = EDGE_CURVE('',#232380,#232388,#232390,.T.); +#232388 = VERTEX_POINT('',#232389); +#232389 = CARTESIAN_POINT('',(139.644597,-54.614285,1.585)); +#232390 = CIRCLE('',#232391,6.500103935387E-02); +#232391 = AXIS2_PLACEMENT_3D('',#232392,#232393,#232394); +#232392 = CARTESIAN_POINT('',(139.70959803934,-54.61428396065,1.585)); +#232393 = DIRECTION('',(0.,0.,-1.)); +#232394 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#232395 = ORIENTED_EDGE('',*,*,#232396,.T.); +#232396 = EDGE_CURVE('',#232388,#232397,#232399,.T.); +#232397 = VERTEX_POINT('',#232398); +#232398 = CARTESIAN_POINT('',(139.644597,-54.185713,1.585)); +#232399 = LINE('',#232400,#232401); +#232400 = CARTESIAN_POINT('',(139.644597,-54.614285,1.585)); +#232401 = VECTOR('',#232402,1.); +#232402 = DIRECTION('',(0.,1.,0.)); +#232403 = ORIENTED_EDGE('',*,*,#232404,.T.); +#232404 = EDGE_CURVE('',#232397,#232286,#232405,.T.); +#232405 = LINE('',#232406,#232407); +#232406 = CARTESIAN_POINT('',(139.644597,-54.185713,1.585)); +#232407 = VECTOR('',#232408,1.); +#232408 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#232409 = PLANE('',#232410); +#232410 = AXIS2_PLACEMENT_3D('',#232411,#232412,#232413); +#232411 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232412 = DIRECTION('',(0.,0.,1.)); +#232413 = DIRECTION('',(1.,0.,-0.)); +#232414 = SHELL_BASED_SURFACE_MODEL('',(#232415)); +#232415 = OPEN_SHELL('',(#232416)); +#232416 = ADVANCED_FACE('',(#232417),#232603,.T.); +#232417 = FACE_BOUND('',#232418,.F.); +#232418 = EDGE_LOOP('',(#232419,#232430,#232438,#232446,#232454,#232462, + #232471,#232479,#232488,#232496,#232505,#232513,#232522,#232530, + #232538,#232546,#232555,#232563,#232571,#232580,#232588,#232597)); +#232419 = ORIENTED_EDGE('',*,*,#232420,.T.); +#232420 = EDGE_CURVE('',#232421,#232423,#232425,.T.); +#232421 = VERTEX_POINT('',#232422); +#232422 = CARTESIAN_POINT('',(150.160369,-54.213914,1.585)); +#232423 = VERTEX_POINT('',#232424); +#232424 = CARTESIAN_POINT('',(150.379225,-53.995057,1.585)); +#232425 = CIRCLE('',#232426,0.308109459502); +#232426 = AXIS2_PLACEMENT_3D('',#232427,#232428,#232429); +#232427 = CARTESIAN_POINT('',(150.45818845359,-54.29287609279,1.585)); +#232428 = DIRECTION('',(0.,0.,-1.)); +#232429 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#232430 = ORIENTED_EDGE('',*,*,#232431,.T.); +#232431 = EDGE_CURVE('',#232423,#232432,#232434,.T.); +#232432 = VERTEX_POINT('',#232433); +#232433 = CARTESIAN_POINT('',(150.611361,-53.992777,1.585)); +#232434 = LINE('',#232435,#232436); +#232435 = CARTESIAN_POINT('',(150.379225,-53.995057,1.585)); +#232436 = VECTOR('',#232437,1.); +#232437 = DIRECTION('',(0.999951769331,9.821354869909E-03,0.)); +#232438 = ORIENTED_EDGE('',*,*,#232439,.T.); +#232439 = EDGE_CURVE('',#232432,#232440,#232442,.T.); +#232440 = VERTEX_POINT('',#232441); +#232441 = CARTESIAN_POINT('',(150.637237,-53.999004,1.585)); +#232442 = LINE('',#232443,#232444); +#232443 = CARTESIAN_POINT('',(150.611361,-53.992777,1.585)); +#232444 = VECTOR('',#232445,1.); +#232445 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#232446 = ORIENTED_EDGE('',*,*,#232447,.T.); +#232447 = EDGE_CURVE('',#232440,#232448,#232450,.T.); +#232448 = VERTEX_POINT('',#232449); +#232449 = CARTESIAN_POINT('',(150.739844,-54.054037,1.585)); +#232450 = LINE('',#232451,#232452); +#232451 = CARTESIAN_POINT('',(150.637237,-53.999004,1.585)); +#232452 = VECTOR('',#232453,1.); +#232453 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#232454 = ORIENTED_EDGE('',*,*,#232455,.T.); +#232455 = EDGE_CURVE('',#232448,#232456,#232458,.T.); +#232456 = VERTEX_POINT('',#232457); +#232457 = CARTESIAN_POINT('',(150.794878,-54.113788,1.585)); +#232458 = LINE('',#232459,#232460); +#232459 = CARTESIAN_POINT('',(150.739844,-54.054037,1.585)); +#232460 = VECTOR('',#232461,1.); +#232461 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#232462 = ORIENTED_EDGE('',*,*,#232463,.T.); +#232463 = EDGE_CURVE('',#232456,#232464,#232466,.T.); +#232464 = VERTEX_POINT('',#232465); +#232465 = CARTESIAN_POINT('',(150.788491,-54.608725,1.585)); +#232466 = CIRCLE('',#232467,0.457783772261); +#232467 = AXIS2_PLACEMENT_3D('',#232468,#232469,#232470); +#232468 = CARTESIAN_POINT('',(150.40659953493,-54.35628710455,1.585)); +#232469 = DIRECTION('',(0.,0.,-1.)); +#232470 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#232471 = ORIENTED_EDGE('',*,*,#232472,.T.); +#232472 = EDGE_CURVE('',#232464,#232473,#232475,.T.); +#232473 = VERTEX_POINT('',#232474); +#232474 = CARTESIAN_POINT('',(150.739843,-54.660247,1.585)); +#232475 = LINE('',#232476,#232477); +#232476 = CARTESIAN_POINT('',(150.788491,-54.608725,1.585)); +#232477 = VECTOR('',#232478,1.); +#232478 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#232479 = ORIENTED_EDGE('',*,*,#232480,.T.); +#232480 = EDGE_CURVE('',#232473,#232481,#232483,.T.); +#232481 = VERTEX_POINT('',#232482); +#232482 = CARTESIAN_POINT('',(150.647921,-54.568323,1.585)); +#232483 = CIRCLE('',#232484,6.499937665137E-02); +#232484 = AXIS2_PLACEMENT_3D('',#232485,#232486,#232487); +#232485 = CARTESIAN_POINT('',(150.69388218097,-54.61428481902,1.585)); +#232486 = DIRECTION('',(-0.,0.,-1.)); +#232487 = DIRECTION('',(0.707096304454,-0.707117257764,-0.)); +#232488 = ORIENTED_EDGE('',*,*,#232489,.T.); +#232489 = EDGE_CURVE('',#232481,#232490,#232492,.T.); +#232490 = VERTEX_POINT('',#232491); +#232491 = CARTESIAN_POINT('',(150.683319,-54.532925,1.585)); +#232492 = LINE('',#232493,#232494); +#232493 = CARTESIAN_POINT('',(150.647921,-54.568323,1.585)); +#232494 = VECTOR('',#232495,1.); +#232495 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#232496 = ORIENTED_EDGE('',*,*,#232497,.T.); +#232497 = EDGE_CURVE('',#232490,#232498,#232500,.T.); +#232498 = VERTEX_POINT('',#232499); +#232499 = CARTESIAN_POINT('',(150.683319,-54.18136,1.585)); +#232500 = CIRCLE('',#232501,0.325008683278); +#232501 = AXIS2_PLACEMENT_3D('',#232502,#232503,#232504); +#232502 = CARTESIAN_POINT('',(150.409949,-54.3571425,1.585)); +#232503 = DIRECTION('',(0.,-0.,1.)); +#232504 = DIRECTION('',(0.841115988787,-0.54085478033,-0.)); +#232505 = ORIENTED_EDGE('',*,*,#232506,.T.); +#232506 = EDGE_CURVE('',#232498,#232507,#232509,.T.); +#232507 = VERTEX_POINT('',#232508); +#232508 = CARTESIAN_POINT('',(150.655379,-54.15342,1.585)); +#232509 = LINE('',#232510,#232511); +#232510 = CARTESIAN_POINT('',(150.683319,-54.18136,1.585)); +#232511 = VECTOR('',#232512,1.); +#232512 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232513 = ORIENTED_EDGE('',*,*,#232514,.T.); +#232514 = EDGE_CURVE('',#232507,#232515,#232517,.T.); +#232515 = VERTEX_POINT('',#232516); +#232516 = CARTESIAN_POINT('',(150.346671,-54.15342,1.585)); +#232517 = CIRCLE('',#232518,0.277419178293); +#232518 = AXIS2_PLACEMENT_3D('',#232519,#232520,#232521); +#232519 = CARTESIAN_POINT('',(150.501025,-54.383933,1.585)); +#232520 = DIRECTION('',(0.,0.,1.)); +#232521 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#232522 = ORIENTED_EDGE('',*,*,#232523,.T.); +#232523 = EDGE_CURVE('',#232515,#232524,#232526,.T.); +#232524 = VERTEX_POINT('',#232525); +#232525 = CARTESIAN_POINT('',(150.318733,-54.181358,1.585)); +#232526 = LINE('',#232527,#232528); +#232527 = CARTESIAN_POINT('',(150.346671,-54.15342,1.585)); +#232528 = VECTOR('',#232529,1.); +#232529 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#232530 = ORIENTED_EDGE('',*,*,#232531,.T.); +#232531 = EDGE_CURVE('',#232524,#232532,#232534,.T.); +#232532 = VERTEX_POINT('',#232533); +#232533 = CARTESIAN_POINT('',(150.287454,-54.243916,1.585)); +#232534 = LINE('',#232535,#232536); +#232535 = CARTESIAN_POINT('',(150.318733,-54.181358,1.585)); +#232536 = VECTOR('',#232537,1.); +#232537 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#232538 = ORIENTED_EDGE('',*,*,#232539,.T.); +#232539 = EDGE_CURVE('',#232532,#232540,#232542,.T.); +#232540 = VERTEX_POINT('',#232541); +#232541 = CARTESIAN_POINT('',(150.287454,-54.357142,1.585)); +#232542 = LINE('',#232543,#232544); +#232543 = CARTESIAN_POINT('',(150.287454,-54.243916,1.585)); +#232544 = VECTOR('',#232545,1.); +#232545 = DIRECTION('',(0.,-1.,0.)); +#232546 = ORIENTED_EDGE('',*,*,#232547,.T.); +#232547 = EDGE_CURVE('',#232540,#232548,#232550,.T.); +#232548 = VERTEX_POINT('',#232549); +#232549 = CARTESIAN_POINT('',(150.179652,-54.40606,1.585)); +#232550 = CIRCLE('',#232551,6.500010429712E-02); +#232551 = AXIS2_PLACEMENT_3D('',#232552,#232553,#232554); +#232552 = CARTESIAN_POINT('',(150.2224538957,-54.35714158544,1.585)); +#232553 = DIRECTION('',(-0.,0.,-1.)); +#232554 = DIRECTION('',(0.99999999998,-6.377788677602E-06,-0.)); +#232555 = ORIENTED_EDGE('',*,*,#232556,.T.); +#232556 = EDGE_CURVE('',#232548,#232557,#232559,.T.); +#232557 = VERTEX_POINT('',#232558); +#232558 = CARTESIAN_POINT('',(149.944597,-54.200386,1.585)); +#232559 = LINE('',#232560,#232561); +#232560 = CARTESIAN_POINT('',(150.179652,-54.40606,1.585)); +#232561 = VECTOR('',#232562,1.); +#232562 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#232563 = ORIENTED_EDGE('',*,*,#232564,.T.); +#232564 = EDGE_CURVE('',#232557,#232565,#232567,.T.); +#232565 = VERTEX_POINT('',#232566); +#232566 = CARTESIAN_POINT('',(149.944597,-54.614285,1.585)); +#232567 = LINE('',#232568,#232569); +#232568 = CARTESIAN_POINT('',(149.944597,-54.200386,1.585)); +#232569 = VECTOR('',#232570,1.); +#232570 = DIRECTION('',(0.,-1.,0.)); +#232571 = ORIENTED_EDGE('',*,*,#232572,.T.); +#232572 = EDGE_CURVE('',#232565,#232573,#232575,.T.); +#232573 = VERTEX_POINT('',#232574); +#232574 = CARTESIAN_POINT('',(149.814597,-54.614285,1.585)); +#232575 = CIRCLE('',#232576,6.500000000091E-02); +#232576 = AXIS2_PLACEMENT_3D('',#232577,#232578,#232579); +#232577 = CARTESIAN_POINT('',(149.879597,-54.61428465513,1.585)); +#232578 = DIRECTION('',(-0.,0.,-1.)); +#232579 = DIRECTION('',(0.999999999986,-5.305658134983E-06,-0.)); +#232580 = ORIENTED_EDGE('',*,*,#232581,.T.); +#232581 = EDGE_CURVE('',#232573,#232582,#232584,.T.); +#232582 = VERTEX_POINT('',#232583); +#232583 = CARTESIAN_POINT('',(149.814597,-54.057142,1.585)); +#232584 = LINE('',#232585,#232586); +#232585 = CARTESIAN_POINT('',(149.814597,-54.614285,1.585)); +#232586 = VECTOR('',#232587,1.); +#232587 = DIRECTION('',(0.,1.,0.)); +#232588 = ORIENTED_EDGE('',*,*,#232589,.T.); +#232589 = EDGE_CURVE('',#232582,#232590,#232592,.T.); +#232590 = VERTEX_POINT('',#232591); +#232591 = CARTESIAN_POINT('',(149.9224,-54.008225,1.585)); +#232592 = CIRCLE('',#232593,6.500002288386E-02); +#232593 = AXIS2_PLACEMENT_3D('',#232594,#232595,#232596); +#232594 = CARTESIAN_POINT('',(149.87959702288,-54.05714236015,1.585)); +#232595 = DIRECTION('',(0.,0.,-1.)); +#232596 = DIRECTION('',(-0.999999999985,5.540887915866E-06,0.)); +#232597 = ORIENTED_EDGE('',*,*,#232598,.T.); +#232598 = EDGE_CURVE('',#232590,#232421,#232599,.T.); +#232599 = LINE('',#232600,#232601); +#232600 = CARTESIAN_POINT('',(149.9224,-54.008225,1.585)); +#232601 = VECTOR('',#232602,1.); +#232602 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#232603 = PLANE('',#232604); +#232604 = AXIS2_PLACEMENT_3D('',#232605,#232606,#232607); +#232605 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232606 = DIRECTION('',(0.,0.,1.)); +#232607 = DIRECTION('',(1.,0.,-0.)); +#232608 = SHELL_BASED_SURFACE_MODEL('',(#232609)); +#232609 = OPEN_SHELL('',(#232610)); +#232610 = ADVANCED_FACE('',(#232611),#232852,.T.); +#232611 = FACE_BOUND('',#232612,.F.); +#232612 = EDGE_LOOP('',(#232613,#232624,#232632,#232640,#232648,#232656, + #232665,#232673,#232682,#232690,#232698,#232706,#232714,#232722, + #232730,#232739,#232747,#232755,#232763,#232771,#232780,#232788, + #232796,#232804,#232813,#232821,#232829,#232837,#232846)); +#232613 = ORIENTED_EDGE('',*,*,#232614,.T.); +#232614 = EDGE_CURVE('',#232615,#232617,#232619,.T.); +#232615 = VERTEX_POINT('',#232616); +#232616 = CARTESIAN_POINT('',(124.928882,-53.999999,1.585)); +#232617 = VERTEX_POINT('',#232618); +#232618 = CARTESIAN_POINT('',(124.993882,-53.934999,1.585)); +#232619 = CIRCLE('',#232620,6.500103935387E-02); +#232620 = AXIS2_PLACEMENT_3D('',#232621,#232622,#232623); +#232621 = CARTESIAN_POINT('',(124.99388303934,-54.00000003934,1.585)); +#232622 = DIRECTION('',(0.,0.,-1.)); +#232623 = DIRECTION('',(-0.999999999872,1.598967616426E-05,0.)); +#232624 = ORIENTED_EDGE('',*,*,#232625,.T.); +#232625 = EDGE_CURVE('',#232617,#232626,#232628,.T.); +#232626 = VERTEX_POINT('',#232627); +#232627 = CARTESIAN_POINT('',(125.293882,-53.934999,1.585)); +#232628 = LINE('',#232629,#232630); +#232629 = CARTESIAN_POINT('',(124.993882,-53.934999,1.585)); +#232630 = VECTOR('',#232631,1.); +#232631 = DIRECTION('',(1.,0.,0.)); +#232632 = ORIENTED_EDGE('',*,*,#232633,.T.); +#232633 = EDGE_CURVE('',#232626,#232634,#232636,.T.); +#232634 = VERTEX_POINT('',#232635); +#232635 = CARTESIAN_POINT('',(125.318756,-53.939947,1.585)); +#232636 = LINE('',#232637,#232638); +#232637 = CARTESIAN_POINT('',(125.293882,-53.934999,1.585)); +#232638 = VECTOR('',#232639,1.); +#232639 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#232640 = ORIENTED_EDGE('',*,*,#232641,.T.); +#232641 = EDGE_CURVE('',#232634,#232642,#232644,.T.); +#232642 = VERTEX_POINT('',#232643); +#232643 = CARTESIAN_POINT('',(125.339843,-53.954037,1.585)); +#232644 = LINE('',#232645,#232646); +#232645 = CARTESIAN_POINT('',(125.318756,-53.939947,1.585)); +#232646 = VECTOR('',#232647,1.); +#232647 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#232648 = ORIENTED_EDGE('',*,*,#232649,.T.); +#232649 = EDGE_CURVE('',#232642,#232650,#232652,.T.); +#232650 = VERTEX_POINT('',#232651); +#232651 = CARTESIAN_POINT('',(125.391003,-54.009318,1.585)); +#232652 = LINE('',#232653,#232654); +#232653 = CARTESIAN_POINT('',(125.339843,-53.954037,1.585)); +#232654 = VECTOR('',#232655,1.); +#232655 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#232656 = ORIENTED_EDGE('',*,*,#232657,.T.); +#232657 = EDGE_CURVE('',#232650,#232658,#232660,.T.); +#232658 = VERTEX_POINT('',#232659); +#232659 = CARTESIAN_POINT('',(125.390999,-54.419256,1.585)); +#232660 = CIRCLE('',#232661,0.409312568567); +#232661 = AXIS2_PLACEMENT_3D('',#232662,#232663,#232664); +#232662 = CARTESIAN_POINT('',(125.03670664807,-54.21428354294,1.585)); +#232663 = DIRECTION('',(0.,0.,-1.)); +#232664 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#232665 = ORIENTED_EDGE('',*,*,#232666,.T.); +#232666 = EDGE_CURVE('',#232658,#232667,#232669,.T.); +#232667 = VERTEX_POINT('',#232668); +#232668 = CARTESIAN_POINT('',(125.288322,-54.523179,1.585)); +#232669 = LINE('',#232670,#232671); +#232670 = CARTESIAN_POINT('',(125.390999,-54.419256,1.585)); +#232671 = VECTOR('',#232672,1.); +#232672 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#232673 = ORIENTED_EDGE('',*,*,#232674,.T.); +#232674 = EDGE_CURVE('',#232667,#232675,#232677,.T.); +#232675 = VERTEX_POINT('',#232676); +#232676 = CARTESIAN_POINT('',(124.849546,-54.620201,1.585)); +#232677 = CIRCLE('',#232678,0.675422176574); +#232678 = AXIS2_PLACEMENT_3D('',#232679,#232680,#232681); +#232679 = CARTESIAN_POINT('',(124.93141275007,-53.94975864465,1.585)); +#232680 = DIRECTION('',(0.,0.,-1.)); +#232681 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#232682 = ORIENTED_EDGE('',*,*,#232683,.T.); +#232683 = EDGE_CURVE('',#232675,#232684,#232686,.T.); +#232684 = VERTEX_POINT('',#232685); +#232685 = CARTESIAN_POINT('',(124.664813,-54.572423,1.585)); +#232686 = LINE('',#232687,#232688); +#232687 = CARTESIAN_POINT('',(124.849546,-54.620201,1.585)); +#232688 = VECTOR('',#232689,1.); +#232689 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#232690 = ORIENTED_EDGE('',*,*,#232691,.T.); +#232691 = EDGE_CURVE('',#232684,#232692,#232694,.T.); +#232692 = VERTEX_POINT('',#232693); +#232693 = CARTESIAN_POINT('',(124.562206,-54.51739,1.585)); +#232694 = LINE('',#232695,#232696); +#232695 = CARTESIAN_POINT('',(124.664813,-54.572423,1.585)); +#232696 = VECTOR('',#232697,1.); +#232697 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#232698 = ORIENTED_EDGE('',*,*,#232699,.T.); +#232699 = EDGE_CURVE('',#232692,#232700,#232702,.T.); +#232700 = VERTEX_POINT('',#232701); +#232701 = CARTESIAN_POINT('',(124.468191,-54.419252,1.585)); +#232702 = LINE('',#232703,#232704); +#232703 = CARTESIAN_POINT('',(124.562206,-54.51739,1.585)); +#232704 = VECTOR('',#232705,1.); +#232705 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#232706 = ORIENTED_EDGE('',*,*,#232707,.T.); +#232707 = EDGE_CURVE('',#232700,#232708,#232710,.T.); +#232708 = VERTEX_POINT('',#232709); +#232709 = CARTESIAN_POINT('',(124.41663,-54.267364,1.585)); +#232710 = LINE('',#232711,#232712); +#232711 = CARTESIAN_POINT('',(124.468191,-54.419252,1.585)); +#232712 = VECTOR('',#232713,1.); +#232713 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#232714 = ORIENTED_EDGE('',*,*,#232715,.T.); +#232715 = EDGE_CURVE('',#232708,#232716,#232718,.T.); +#232716 = VERTEX_POINT('',#232717); +#232717 = CARTESIAN_POINT('',(124.417512,-54.113914,1.585)); +#232718 = LINE('',#232719,#232720); +#232719 = CARTESIAN_POINT('',(124.41663,-54.267364,1.585)); +#232720 = VECTOR('',#232721,1.); +#232721 = DIRECTION('',(5.747705643239E-03,0.999983481803,0.)); +#232722 = ORIENTED_EDGE('',*,*,#232723,.T.); +#232723 = EDGE_CURVE('',#232716,#232724,#232726,.T.); +#232724 = VERTEX_POINT('',#232725); +#232725 = CARTESIAN_POINT('',(124.464316,-54.013787,1.585)); +#232726 = LINE('',#232727,#232728); +#232727 = CARTESIAN_POINT('',(124.417512,-54.113914,1.585)); +#232728 = VECTOR('',#232729,1.); +#232729 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#232730 = ORIENTED_EDGE('',*,*,#232731,.T.); +#232731 = EDGE_CURVE('',#232724,#232732,#232734,.T.); +#232732 = VERTEX_POINT('',#232733); +#232733 = CARTESIAN_POINT('',(124.580592,-54.071925,1.585)); +#232734 = CIRCLE('',#232735,6.500026004258E-02); +#232735 = AXIS2_PLACEMENT_3D('',#232736,#232737,#232738); +#232736 = CARTESIAN_POINT('',(124.52245365279,-54.0428566944,1.585)); +#232737 = DIRECTION('',(0.,0.,-1.)); +#232738 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#232739 = ORIENTED_EDGE('',*,*,#232740,.T.); +#232740 = EDGE_CURVE('',#232732,#232741,#232743,.T.); +#232741 = VERTEX_POINT('',#232742); +#232742 = CARTESIAN_POINT('',(124.544597,-54.143915,1.585)); +#232743 = LINE('',#232744,#232745); +#232744 = CARTESIAN_POINT('',(124.580592,-54.071925,1.585)); +#232745 = VECTOR('',#232746,1.); +#232746 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#232747 = ORIENTED_EDGE('',*,*,#232748,.T.); +#232748 = EDGE_CURVE('',#232741,#232749,#232751,.T.); +#232749 = VERTEX_POINT('',#232750); +#232750 = CARTESIAN_POINT('',(124.544597,-54.246595,1.585)); +#232751 = LINE('',#232752,#232753); +#232752 = CARTESIAN_POINT('',(124.544597,-54.143915,1.585)); +#232753 = VECTOR('',#232754,1.); +#232754 = DIRECTION('',(0.,-1.,0.)); +#232755 = ORIENTED_EDGE('',*,*,#232756,.T.); +#232756 = EDGE_CURVE('',#232749,#232757,#232759,.T.); +#232757 = VERTEX_POINT('',#232758); +#232758 = CARTESIAN_POINT('',(124.579265,-54.3506,1.585)); +#232759 = LINE('',#232760,#232761); +#232760 = CARTESIAN_POINT('',(124.544597,-54.246595,1.585)); +#232761 = VECTOR('',#232762,1.); +#232762 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#232763 = ORIENTED_EDGE('',*,*,#232764,.T.); +#232764 = EDGE_CURVE('',#232757,#232765,#232767,.T.); +#232765 = VERTEX_POINT('',#232766); +#232766 = CARTESIAN_POINT('',(124.646669,-54.418006,1.585)); +#232767 = LINE('',#232768,#232769); +#232768 = CARTESIAN_POINT('',(124.579265,-54.3506,1.585)); +#232769 = VECTOR('',#232770,1.); +#232770 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#232771 = ORIENTED_EDGE('',*,*,#232772,.T.); +#232772 = EDGE_CURVE('',#232765,#232773,#232775,.T.); +#232773 = VERTEX_POINT('',#232774); +#232774 = CARTESIAN_POINT('',(124.985881,-54.492142,1.585)); +#232775 = CIRCLE('',#232776,0.553317785495); +#232776 = AXIS2_PLACEMENT_3D('',#232777,#232778,#232779); +#232777 = CARTESIAN_POINT('',(124.9284500839,-53.94181276979,1.585)); +#232778 = DIRECTION('',(0.,0.,1.)); +#232779 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#232780 = ORIENTED_EDGE('',*,*,#232781,.T.); +#232781 = EDGE_CURVE('',#232773,#232782,#232784,.T.); +#232782 = VERTEX_POINT('',#232783); +#232783 = CARTESIAN_POINT('',(125.142622,-54.452956,1.585)); +#232784 = LINE('',#232785,#232786); +#232785 = CARTESIAN_POINT('',(124.985881,-54.492142,1.585)); +#232786 = VECTOR('',#232787,1.); +#232787 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#232788 = ORIENTED_EDGE('',*,*,#232789,.T.); +#232789 = EDGE_CURVE('',#232782,#232790,#232792,.T.); +#232790 = VERTEX_POINT('',#232791); +#232791 = CARTESIAN_POINT('',(125.212522,-54.418007,1.585)); +#232792 = LINE('',#232793,#232794); +#232793 = CARTESIAN_POINT('',(125.142622,-54.452956,1.585)); +#232794 = VECTOR('',#232795,1.); +#232795 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#232796 = ORIENTED_EDGE('',*,*,#232797,.T.); +#232797 = EDGE_CURVE('',#232790,#232798,#232800,.T.); +#232798 = VERTEX_POINT('',#232799); +#232799 = CARTESIAN_POINT('',(125.279928,-54.3506,1.585)); +#232800 = LINE('',#232801,#232802); +#232801 = CARTESIAN_POINT('',(125.212522,-54.418007,1.585)); +#232802 = VECTOR('',#232803,1.); +#232803 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#232804 = ORIENTED_EDGE('',*,*,#232805,.T.); +#232805 = EDGE_CURVE('',#232798,#232806,#232808,.T.); +#232806 = VERTEX_POINT('',#232807); +#232807 = CARTESIAN_POINT('',(125.279928,-54.077968,1.585)); +#232808 = CIRCLE('',#232809,0.272194686174); +#232809 = AXIS2_PLACEMENT_3D('',#232810,#232811,#232812); +#232810 = CARTESIAN_POINT('',(125.04432686391,-54.214284,1.585)); +#232811 = DIRECTION('',(0.,-0.,1.)); +#232812 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#232813 = ORIENTED_EDGE('',*,*,#232814,.T.); +#232814 = EDGE_CURVE('',#232806,#232815,#232817,.T.); +#232815 = VERTEX_POINT('',#232816); +#232816 = CARTESIAN_POINT('',(125.266959,-54.064999,1.585)); +#232817 = LINE('',#232818,#232819); +#232818 = CARTESIAN_POINT('',(125.279928,-54.077968,1.585)); +#232819 = VECTOR('',#232820,1.); +#232820 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232821 = ORIENTED_EDGE('',*,*,#232822,.T.); +#232822 = EDGE_CURVE('',#232815,#232823,#232825,.T.); +#232823 = VERTEX_POINT('',#232824); +#232824 = CARTESIAN_POINT('',(125.058882,-54.064999,1.585)); +#232825 = LINE('',#232826,#232827); +#232826 = CARTESIAN_POINT('',(125.266959,-54.064999,1.585)); +#232827 = VECTOR('',#232828,1.); +#232828 = DIRECTION('',(-1.,0.,0.)); +#232829 = ORIENTED_EDGE('',*,*,#232830,.T.); +#232830 = EDGE_CURVE('',#232823,#232831,#232833,.T.); +#232831 = VERTEX_POINT('',#232832); +#232832 = CARTESIAN_POINT('',(125.058882,-54.171428,1.585)); +#232833 = LINE('',#232834,#232835); +#232834 = CARTESIAN_POINT('',(125.058882,-54.064999,1.585)); +#232835 = VECTOR('',#232836,1.); +#232836 = DIRECTION('',(0.,-1.,0.)); +#232837 = ORIENTED_EDGE('',*,*,#232838,.T.); +#232838 = EDGE_CURVE('',#232831,#232839,#232841,.T.); +#232839 = VERTEX_POINT('',#232840); +#232840 = CARTESIAN_POINT('',(124.928882,-54.171428,1.585)); +#232841 = CIRCLE('',#232842,6.500000000091E-02); +#232842 = AXIS2_PLACEMENT_3D('',#232843,#232844,#232845); +#232843 = CARTESIAN_POINT('',(124.993882,-54.17142765513,1.585)); +#232844 = DIRECTION('',(-0.,0.,-1.)); +#232845 = DIRECTION('',(0.999999999986,-5.305658134982E-06,-0.)); +#232846 = ORIENTED_EDGE('',*,*,#232847,.T.); +#232847 = EDGE_CURVE('',#232839,#232615,#232848,.T.); +#232848 = LINE('',#232849,#232850); +#232849 = CARTESIAN_POINT('',(124.928882,-54.171428,1.585)); +#232850 = VECTOR('',#232851,1.); +#232851 = DIRECTION('',(0.,1.,0.)); +#232852 = PLANE('',#232853); +#232853 = AXIS2_PLACEMENT_3D('',#232854,#232855,#232856); +#232854 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232855 = DIRECTION('',(0.,0.,1.)); +#232856 = DIRECTION('',(1.,0.,-0.)); +#232857 = SHELL_BASED_SURFACE_MODEL('',(#232858)); +#232858 = OPEN_SHELL('',(#232859)); +#232859 = ADVANCED_FACE('',(#232860),#232946,.T.); +#232860 = FACE_BOUND('',#232861,.F.); +#232861 = EDGE_LOOP('',(#232862,#232873,#232881,#232890,#232898,#232906, + #232915,#232923,#232932,#232940)); +#232862 = ORIENTED_EDGE('',*,*,#232863,.T.); +#232863 = EDGE_CURVE('',#232864,#232866,#232868,.T.); +#232864 = VERTEX_POINT('',#232865); +#232865 = CARTESIAN_POINT('',(142.259597,-54.100713,1.585)); +#232866 = VERTEX_POINT('',#232867); +#232867 = CARTESIAN_POINT('',(142.259597,-53.970713,1.585)); +#232868 = CIRCLE('',#232869,6.500000000091E-02); +#232869 = AXIS2_PLACEMENT_3D('',#232870,#232871,#232872); +#232870 = CARTESIAN_POINT('',(142.25959734486,-54.035713,1.585)); +#232871 = DIRECTION('',(0.,0.,-1.)); +#232872 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#232873 = ORIENTED_EDGE('',*,*,#232874,.T.); +#232874 = EDGE_CURVE('',#232866,#232875,#232877,.T.); +#232875 = VERTEX_POINT('',#232876); +#232876 = CARTESIAN_POINT('',(143.159597,-53.970713,1.585)); +#232877 = LINE('',#232878,#232879); +#232878 = CARTESIAN_POINT('',(142.259597,-53.970713,1.585)); +#232879 = VECTOR('',#232880,1.); +#232880 = DIRECTION('',(1.,0.,0.)); +#232881 = ORIENTED_EDGE('',*,*,#232882,.T.); +#232882 = EDGE_CURVE('',#232875,#232883,#232885,.T.); +#232883 = VERTEX_POINT('',#232884); +#232884 = CARTESIAN_POINT('',(143.191846,-54.092149,1.585)); +#232885 = CIRCLE('',#232886,6.500021194141E-02); +#232886 = AXIS2_PLACEMENT_3D('',#232887,#232888,#232889); +#232887 = CARTESIAN_POINT('',(143.15959651351,-54.03571321194,1.585)); +#232888 = DIRECTION('',(0.,0.,-1.)); +#232889 = DIRECTION('',(7.484332115464E-06,0.999999999972,0.)); +#232890 = ORIENTED_EDGE('',*,*,#232891,.T.); +#232891 = EDGE_CURVE('',#232883,#232892,#232894,.T.); +#232892 = VERTEX_POINT('',#232893); +#232893 = CARTESIAN_POINT('',(142.504359,-54.484999,1.585)); +#232894 = LINE('',#232895,#232896); +#232895 = CARTESIAN_POINT('',(143.191846,-54.092149,1.585)); +#232896 = VECTOR('',#232897,1.); +#232897 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#232898 = ORIENTED_EDGE('',*,*,#232899,.T.); +#232899 = EDGE_CURVE('',#232892,#232900,#232902,.T.); +#232900 = VERTEX_POINT('',#232901); +#232901 = CARTESIAN_POINT('',(143.159597,-54.484999,1.585)); +#232902 = LINE('',#232903,#232904); +#232903 = CARTESIAN_POINT('',(142.504359,-54.484999,1.585)); +#232904 = VECTOR('',#232905,1.); +#232905 = DIRECTION('',(1.,0.,0.)); +#232906 = ORIENTED_EDGE('',*,*,#232907,.T.); +#232907 = EDGE_CURVE('',#232900,#232908,#232910,.T.); +#232908 = VERTEX_POINT('',#232909); +#232909 = CARTESIAN_POINT('',(143.159597,-54.614999,1.585)); +#232910 = CIRCLE('',#232911,6.500000000091E-02); +#232911 = AXIS2_PLACEMENT_3D('',#232912,#232913,#232914); +#232912 = CARTESIAN_POINT('',(143.15959665513,-54.549999,1.585)); +#232913 = DIRECTION('',(0.,0.,-1.)); +#232914 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#232915 = ORIENTED_EDGE('',*,*,#232916,.T.); +#232916 = EDGE_CURVE('',#232908,#232917,#232919,.T.); +#232917 = VERTEX_POINT('',#232918); +#232918 = CARTESIAN_POINT('',(142.259597,-54.614999,1.585)); +#232919 = LINE('',#232920,#232921); +#232920 = CARTESIAN_POINT('',(143.159597,-54.614999,1.585)); +#232921 = VECTOR('',#232922,1.); +#232922 = DIRECTION('',(-1.,0.,0.)); +#232923 = ORIENTED_EDGE('',*,*,#232924,.T.); +#232924 = EDGE_CURVE('',#232917,#232925,#232927,.T.); +#232925 = VERTEX_POINT('',#232926); +#232926 = CARTESIAN_POINT('',(142.227348,-54.493563,1.585)); +#232927 = CIRCLE('',#232928,6.500021194141E-02); +#232928 = AXIS2_PLACEMENT_3D('',#232929,#232930,#232931); +#232929 = CARTESIAN_POINT('',(142.25959748648,-54.54999878806,1.585)); +#232930 = DIRECTION('',(0.,0.,-1.)); +#232931 = DIRECTION('',(-7.484332115464E-06,-0.999999999972,-0.)); +#232932 = ORIENTED_EDGE('',*,*,#232933,.T.); +#232933 = EDGE_CURVE('',#232925,#232934,#232936,.T.); +#232934 = VERTEX_POINT('',#232935); +#232935 = CARTESIAN_POINT('',(142.914835,-54.100713,1.585)); +#232936 = LINE('',#232937,#232938); +#232937 = CARTESIAN_POINT('',(142.227348,-54.493563,1.585)); +#232938 = VECTOR('',#232939,1.); +#232939 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#232940 = ORIENTED_EDGE('',*,*,#232941,.T.); +#232941 = EDGE_CURVE('',#232934,#232864,#232942,.T.); +#232942 = LINE('',#232943,#232944); +#232943 = CARTESIAN_POINT('',(142.914835,-54.100713,1.585)); +#232944 = VECTOR('',#232945,1.); +#232945 = DIRECTION('',(-1.,0.,0.)); +#232946 = PLANE('',#232947); +#232947 = AXIS2_PLACEMENT_3D('',#232948,#232949,#232950); +#232948 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232949 = DIRECTION('',(0.,0.,1.)); +#232950 = DIRECTION('',(1.,0.,-0.)); +#232951 = SHELL_BASED_SURFACE_MODEL('',(#232952)); +#232952 = OPEN_SHELL('',(#232953)); +#232953 = ADVANCED_FACE('',(#232954),#233040,.T.); +#232954 = FACE_BOUND('',#232955,.F.); +#232955 = EDGE_LOOP('',(#232956,#232967,#232975,#232984,#232992,#233000, + #233009,#233017,#233026,#233034)); +#232956 = ORIENTED_EDGE('',*,*,#232957,.T.); +#232957 = EDGE_CURVE('',#232958,#232960,#232962,.T.); +#232958 = VERTEX_POINT('',#232959); +#232959 = CARTESIAN_POINT('',(116.859597,-54.079285,1.585)); +#232960 = VERTEX_POINT('',#232961); +#232961 = CARTESIAN_POINT('',(116.859597,-53.949285,1.585)); +#232962 = CIRCLE('',#232963,6.500000000091E-02); +#232963 = AXIS2_PLACEMENT_3D('',#232964,#232965,#232966); +#232964 = CARTESIAN_POINT('',(116.85959734486,-54.014285,1.585)); +#232965 = DIRECTION('',(0.,0.,-1.)); +#232966 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#232967 = ORIENTED_EDGE('',*,*,#232968,.T.); +#232968 = EDGE_CURVE('',#232960,#232969,#232971,.T.); +#232969 = VERTEX_POINT('',#232970); +#232970 = CARTESIAN_POINT('',(117.759597,-53.949285,1.585)); +#232971 = LINE('',#232972,#232973); +#232972 = CARTESIAN_POINT('',(116.859597,-53.949285,1.585)); +#232973 = VECTOR('',#232974,1.); +#232974 = DIRECTION('',(1.,0.,0.)); +#232975 = ORIENTED_EDGE('',*,*,#232976,.T.); +#232976 = EDGE_CURVE('',#232969,#232977,#232979,.T.); +#232977 = VERTEX_POINT('',#232978); +#232978 = CARTESIAN_POINT('',(117.791846,-54.070721,1.585)); +#232979 = CIRCLE('',#232980,6.500021194141E-02); +#232980 = AXIS2_PLACEMENT_3D('',#232981,#232982,#232983); +#232981 = CARTESIAN_POINT('',(117.75959651351,-54.01428521194,1.585)); +#232982 = DIRECTION('',(0.,0.,-1.)); +#232983 = DIRECTION('',(7.484332115463E-06,0.999999999972,0.)); +#232984 = ORIENTED_EDGE('',*,*,#232985,.T.); +#232985 = EDGE_CURVE('',#232977,#232986,#232988,.T.); +#232986 = VERTEX_POINT('',#232987); +#232987 = CARTESIAN_POINT('',(117.104359,-54.463571,1.585)); +#232988 = LINE('',#232989,#232990); +#232989 = CARTESIAN_POINT('',(117.791846,-54.070721,1.585)); +#232990 = VECTOR('',#232991,1.); +#232991 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#232992 = ORIENTED_EDGE('',*,*,#232993,.T.); +#232993 = EDGE_CURVE('',#232986,#232994,#232996,.T.); +#232994 = VERTEX_POINT('',#232995); +#232995 = CARTESIAN_POINT('',(117.759597,-54.463571,1.585)); +#232996 = LINE('',#232997,#232998); +#232997 = CARTESIAN_POINT('',(117.104359,-54.463571,1.585)); +#232998 = VECTOR('',#232999,1.); +#232999 = DIRECTION('',(1.,0.,0.)); +#233000 = ORIENTED_EDGE('',*,*,#233001,.T.); +#233001 = EDGE_CURVE('',#232994,#233002,#233004,.T.); +#233002 = VERTEX_POINT('',#233003); +#233003 = CARTESIAN_POINT('',(117.759597,-54.593571,1.585)); +#233004 = CIRCLE('',#233005,6.500000000091E-02); +#233005 = AXIS2_PLACEMENT_3D('',#233006,#233007,#233008); +#233006 = CARTESIAN_POINT('',(117.75959665513,-54.528571,1.585)); +#233007 = DIRECTION('',(0.,0.,-1.)); +#233008 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#233009 = ORIENTED_EDGE('',*,*,#233010,.T.); +#233010 = EDGE_CURVE('',#233002,#233011,#233013,.T.); +#233011 = VERTEX_POINT('',#233012); +#233012 = CARTESIAN_POINT('',(116.859597,-54.593571,1.585)); +#233013 = LINE('',#233014,#233015); +#233014 = CARTESIAN_POINT('',(117.759597,-54.593571,1.585)); +#233015 = VECTOR('',#233016,1.); +#233016 = DIRECTION('',(-1.,0.,0.)); +#233017 = ORIENTED_EDGE('',*,*,#233018,.T.); +#233018 = EDGE_CURVE('',#233011,#233019,#233021,.T.); +#233019 = VERTEX_POINT('',#233020); +#233020 = CARTESIAN_POINT('',(116.827348,-54.472135,1.585)); +#233021 = CIRCLE('',#233022,6.50002119414E-02); +#233022 = AXIS2_PLACEMENT_3D('',#233023,#233024,#233025); +#233023 = CARTESIAN_POINT('',(116.85959748648,-54.52857078806,1.585)); +#233024 = DIRECTION('',(0.,0.,-1.)); +#233025 = DIRECTION('',(-7.484332115464E-06,-0.999999999972,-0.)); +#233026 = ORIENTED_EDGE('',*,*,#233027,.T.); +#233027 = EDGE_CURVE('',#233019,#233028,#233030,.T.); +#233028 = VERTEX_POINT('',#233029); +#233029 = CARTESIAN_POINT('',(117.514835,-54.079285,1.585)); +#233030 = LINE('',#233031,#233032); +#233031 = CARTESIAN_POINT('',(116.827348,-54.472135,1.585)); +#233032 = VECTOR('',#233033,1.); +#233033 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#233034 = ORIENTED_EDGE('',*,*,#233035,.T.); +#233035 = EDGE_CURVE('',#233028,#232958,#233036,.T.); +#233036 = LINE('',#233037,#233038); +#233037 = CARTESIAN_POINT('',(117.514835,-54.079285,1.585)); +#233038 = VECTOR('',#233039,1.); +#233039 = DIRECTION('',(-1.,0.,0.)); +#233040 = PLANE('',#233041); +#233041 = AXIS2_PLACEMENT_3D('',#233042,#233043,#233044); +#233042 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233043 = DIRECTION('',(0.,0.,1.)); +#233044 = DIRECTION('',(1.,0.,-0.)); +#233045 = SHELL_BASED_SURFACE_MODEL('',(#233046)); +#233046 = OPEN_SHELL('',(#233047)); +#233047 = ADVANCED_FACE('',(#233048,#233174,#233241),#233308,.T.); +#233048 = FACE_BOUND('',#233049,.F.); +#233049 = EDGE_LOOP('',(#233050,#233061,#233069,#233077,#233085,#233093, + #233102,#233110,#233119,#233127,#233136,#233144,#233152,#233160, + #233168)); +#233050 = ORIENTED_EDGE('',*,*,#233051,.T.); +#233051 = EDGE_CURVE('',#233052,#233054,#233056,.T.); +#233052 = VERTEX_POINT('',#233053); +#233053 = CARTESIAN_POINT('',(119.894813,-53.984718,1.585)); +#233054 = VERTEX_POINT('',#233055); +#233055 = CARTESIAN_POINT('',(120.167237,-53.941861,1.585)); +#233056 = CIRCLE('',#233057,0.328851911789); +#233057 = AXIS2_PLACEMENT_3D('',#233058,#233059,#233060); +#233058 = CARTESIAN_POINT('',(120.07742108589,-54.25820998681,1.585)); +#233059 = DIRECTION('',(0.,0.,-1.)); +#233060 = DIRECTION('',(-0.55528971962,0.831656976935,0.)); +#233061 = ORIENTED_EDGE('',*,*,#233062,.T.); +#233062 = EDGE_CURVE('',#233054,#233063,#233065,.T.); +#233063 = VERTEX_POINT('',#233064); +#233064 = CARTESIAN_POINT('',(120.269843,-53.996894,1.585)); +#233065 = LINE('',#233066,#233067); +#233066 = CARTESIAN_POINT('',(120.167237,-53.941861,1.585)); +#233067 = VECTOR('',#233068,1.); +#233068 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#233069 = ORIENTED_EDGE('',*,*,#233070,.T.); +#233070 = EDGE_CURVE('',#233063,#233071,#233073,.T.); +#233071 = VERTEX_POINT('',#233072); +#233072 = CARTESIAN_POINT('',(120.324878,-54.056644,1.585)); +#233073 = LINE('',#233074,#233075); +#233074 = CARTESIAN_POINT('',(120.269843,-53.996894,1.585)); +#233075 = VECTOR('',#233076,1.); +#233076 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#233077 = ORIENTED_EDGE('',*,*,#233078,.T.); +#233078 = EDGE_CURVE('',#233071,#233079,#233081,.T.); +#233079 = VERTEX_POINT('',#233080); +#233080 = CARTESIAN_POINT('',(120.371681,-54.156771,1.585)); +#233081 = LINE('',#233082,#233083); +#233082 = CARTESIAN_POINT('',(120.324878,-54.056644,1.585)); +#233083 = VECTOR('',#233084,1.); +#233084 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#233085 = ORIENTED_EDGE('',*,*,#233086,.T.); +#233086 = EDGE_CURVE('',#233079,#233087,#233089,.T.); +#233087 = VERTEX_POINT('',#233088); +#233088 = CARTESIAN_POINT('',(120.374597,-54.514285,1.585)); +#233089 = LINE('',#233090,#233091); +#233090 = CARTESIAN_POINT('',(120.371681,-54.156771,1.585)); +#233091 = VECTOR('',#233092,1.); +#233092 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#233093 = ORIENTED_EDGE('',*,*,#233094,.T.); +#233094 = EDGE_CURVE('',#233087,#233095,#233097,.T.); +#233095 = VERTEX_POINT('',#233096); +#233096 = CARTESIAN_POINT('',(120.309597,-54.579285,1.585)); +#233097 = CIRCLE('',#233098,6.500103935389E-02); +#233098 = AXIS2_PLACEMENT_3D('',#233099,#233100,#233101); +#233099 = CARTESIAN_POINT('',(120.30959596065,-54.51428396065,1.585)); +#233100 = DIRECTION('',(0.,0.,-1.)); +#233101 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#233102 = ORIENTED_EDGE('',*,*,#233103,.T.); +#233103 = EDGE_CURVE('',#233095,#233104,#233106,.T.); +#233104 = VERTEX_POINT('',#233105); +#233105 = CARTESIAN_POINT('',(119.409597,-54.579285,1.585)); +#233106 = LINE('',#233107,#233108); +#233107 = CARTESIAN_POINT('',(120.309597,-54.579285,1.585)); +#233108 = VECTOR('',#233109,1.); +#233109 = DIRECTION('',(-1.,0.,0.)); +#233110 = ORIENTED_EDGE('',*,*,#233111,.T.); +#233111 = EDGE_CURVE('',#233104,#233112,#233114,.T.); +#233112 = VERTEX_POINT('',#233113); +#233113 = CARTESIAN_POINT('',(119.344597,-54.514285,1.585)); +#233114 = CIRCLE('',#233115,6.500103935389E-02); +#233115 = AXIS2_PLACEMENT_3D('',#233116,#233117,#233118); +#233116 = CARTESIAN_POINT('',(119.40959803934,-54.51428396065,1.585)); +#233117 = DIRECTION('',(0.,0.,-1.)); +#233118 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#233119 = ORIENTED_EDGE('',*,*,#233120,.T.); +#233120 = EDGE_CURVE('',#233112,#233121,#233123,.T.); +#233121 = VERTEX_POINT('',#233122); +#233122 = CARTESIAN_POINT('',(119.347512,-54.199628,1.585)); +#233123 = LINE('',#233124,#233125); +#233124 = CARTESIAN_POINT('',(119.344597,-54.514285,1.585)); +#233125 = VECTOR('',#233126,1.); +#233126 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#233127 = ORIENTED_EDGE('',*,*,#233128,.T.); +#233128 = EDGE_CURVE('',#233121,#233129,#233131,.T.); +#233129 = VERTEX_POINT('',#233130); +#233130 = CARTESIAN_POINT('',(119.566368,-53.980771,1.585)); +#233131 = CIRCLE('',#233132,0.308109459502); +#233132 = AXIS2_PLACEMENT_3D('',#233133,#233134,#233135); +#233133 = CARTESIAN_POINT('',(119.64533145359,-54.27859009279,1.585)); +#233134 = DIRECTION('',(0.,0.,-1.)); +#233135 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#233136 = ORIENTED_EDGE('',*,*,#233137,.T.); +#233137 = EDGE_CURVE('',#233129,#233138,#233140,.T.); +#233138 = VERTEX_POINT('',#233139); +#233139 = CARTESIAN_POINT('',(119.681396,-53.980771,1.585)); +#233140 = LINE('',#233141,#233142); +#233141 = CARTESIAN_POINT('',(119.566368,-53.980771,1.585)); +#233142 = VECTOR('',#233143,1.); +#233143 = DIRECTION('',(1.,0.,0.)); +#233144 = ORIENTED_EDGE('',*,*,#233145,.T.); +#233145 = EDGE_CURVE('',#233138,#233146,#233148,.T.); +#233146 = VERTEX_POINT('',#233147); +#233147 = CARTESIAN_POINT('',(119.789761,-54.033968,1.585)); +#233148 = LINE('',#233149,#233150); +#233149 = CARTESIAN_POINT('',(119.681396,-53.980771,1.585)); +#233150 = VECTOR('',#233151,1.); +#233151 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#233152 = ORIENTED_EDGE('',*,*,#233153,.T.); +#233153 = EDGE_CURVE('',#233146,#233154,#233156,.T.); +#233154 = VERTEX_POINT('',#233155); +#233155 = CARTESIAN_POINT('',(119.820973,-54.060838,1.585)); +#233156 = LINE('',#233157,#233158); +#233157 = CARTESIAN_POINT('',(119.789761,-54.033968,1.585)); +#233158 = VECTOR('',#233159,1.); +#233159 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#233160 = ORIENTED_EDGE('',*,*,#233161,.T.); +#233161 = EDGE_CURVE('',#233154,#233162,#233164,.T.); +#233162 = VERTEX_POINT('',#233163); +#233163 = CARTESIAN_POINT('',(119.835063,-54.039751,1.585)); +#233164 = LINE('',#233165,#233166); +#233165 = CARTESIAN_POINT('',(119.820973,-54.060838,1.585)); +#233166 = VECTOR('',#233167,1.); +#233167 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#233168 = ORIENTED_EDGE('',*,*,#233169,.T.); +#233169 = EDGE_CURVE('',#233162,#233052,#233170,.T.); +#233170 = LINE('',#233171,#233172); +#233171 = CARTESIAN_POINT('',(119.835063,-54.039751,1.585)); +#233172 = VECTOR('',#233173,1.); +#233173 = DIRECTION('',(0.735544459429,0.677476455829,0.)); +#233174 = FACE_BOUND('',#233175,.F.); +#233175 = EDGE_LOOP('',(#233176,#233187,#233195,#233203,#233211,#233219, + #233227,#233235)); +#233176 = ORIENTED_EDGE('',*,*,#233177,.T.); +#233177 = EDGE_CURVE('',#233178,#233180,#233182,.T.); +#233178 = VERTEX_POINT('',#233179); +#233179 = CARTESIAN_POINT('',(119.713952,-54.139134,1.585)); +#233180 = VERTEX_POINT('',#233181); +#233181 = CARTESIAN_POINT('',(119.533814,-54.139134,1.585)); +#233182 = CIRCLE('',#233183,0.136032349131); +#233183 = AXIS2_PLACEMENT_3D('',#233184,#233185,#233186); +#233184 = CARTESIAN_POINT('',(119.623883,-54.241077,1.585)); +#233185 = DIRECTION('',(0.,0.,1.)); +#233186 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#233187 = ORIENTED_EDGE('',*,*,#233188,.T.); +#233188 = EDGE_CURVE('',#233180,#233189,#233191,.T.); +#233189 = VERTEX_POINT('',#233190); +#233190 = CARTESIAN_POINT('',(119.505876,-54.167072,1.585)); +#233191 = LINE('',#233192,#233193); +#233192 = CARTESIAN_POINT('',(119.533814,-54.139134,1.585)); +#233193 = VECTOR('',#233194,1.); +#233194 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#233195 = ORIENTED_EDGE('',*,*,#233196,.T.); +#233196 = EDGE_CURVE('',#233189,#233197,#233199,.T.); +#233197 = VERTEX_POINT('',#233198); +#233198 = CARTESIAN_POINT('',(119.474597,-54.22963,1.585)); +#233199 = LINE('',#233200,#233201); +#233200 = CARTESIAN_POINT('',(119.505876,-54.167072,1.585)); +#233201 = VECTOR('',#233202,1.); +#233202 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#233203 = ORIENTED_EDGE('',*,*,#233204,.T.); +#233204 = EDGE_CURVE('',#233197,#233205,#233207,.T.); +#233205 = VERTEX_POINT('',#233206); +#233206 = CARTESIAN_POINT('',(119.474597,-54.449285,1.585)); +#233207 = LINE('',#233208,#233209); +#233208 = CARTESIAN_POINT('',(119.474597,-54.22963,1.585)); +#233209 = VECTOR('',#233210,1.); +#233210 = DIRECTION('',(0.,-1.,0.)); +#233211 = ORIENTED_EDGE('',*,*,#233212,.T.); +#233212 = EDGE_CURVE('',#233205,#233213,#233215,.T.); +#233213 = VERTEX_POINT('',#233214); +#233214 = CARTESIAN_POINT('',(119.773168,-54.449285,1.585)); +#233215 = LINE('',#233216,#233217); +#233216 = CARTESIAN_POINT('',(119.474597,-54.449285,1.585)); +#233217 = VECTOR('',#233218,1.); +#233218 = DIRECTION('',(1.,0.,0.)); +#233219 = ORIENTED_EDGE('',*,*,#233220,.T.); +#233220 = EDGE_CURVE('',#233213,#233221,#233223,.T.); +#233221 = VERTEX_POINT('',#233222); +#233222 = CARTESIAN_POINT('',(119.773168,-54.22963,1.585)); +#233223 = LINE('',#233224,#233225); +#233224 = CARTESIAN_POINT('',(119.773168,-54.449285,1.585)); +#233225 = VECTOR('',#233226,1.); +#233226 = DIRECTION('',(0.,1.,0.)); +#233227 = ORIENTED_EDGE('',*,*,#233228,.T.); +#233228 = EDGE_CURVE('',#233221,#233229,#233231,.T.); +#233229 = VERTEX_POINT('',#233230); +#233230 = CARTESIAN_POINT('',(119.741889,-54.167073,1.585)); +#233231 = LINE('',#233232,#233233); +#233232 = CARTESIAN_POINT('',(119.773168,-54.22963,1.585)); +#233233 = VECTOR('',#233234,1.); +#233234 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#233235 = ORIENTED_EDGE('',*,*,#233236,.T.); +#233236 = EDGE_CURVE('',#233229,#233178,#233237,.T.); +#233237 = LINE('',#233238,#233239); +#233238 = CARTESIAN_POINT('',(119.741889,-54.167073,1.585)); +#233239 = VECTOR('',#233240,1.); +#233240 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#233241 = FACE_BOUND('',#233242,.F.); +#233242 = EDGE_LOOP('',(#233243,#233254,#233262,#233270,#233278,#233286, + #233294,#233302)); +#233243 = ORIENTED_EDGE('',*,*,#233244,.T.); +#233244 = EDGE_CURVE('',#233245,#233247,#233249,.T.); +#233245 = VERTEX_POINT('',#233246); +#233246 = CARTESIAN_POINT('',(120.185381,-54.096278,1.585)); +#233247 = VERTEX_POINT('',#233248); +#233248 = CARTESIAN_POINT('',(119.962384,-54.096277,1.585)); +#233249 = CIRCLE('',#233250,0.182756450193); +#233250 = AXIS2_PLACEMENT_3D('',#233251,#233252,#233253); +#233251 = CARTESIAN_POINT('',(120.07388185064,-54.2410808307,1.585)); +#233252 = DIRECTION('',(0.,0.,1.)); +#233253 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#233254 = ORIENTED_EDGE('',*,*,#233255,.T.); +#233255 = EDGE_CURVE('',#233247,#233256,#233258,.T.); +#233256 = VERTEX_POINT('',#233257); +#233257 = CARTESIAN_POINT('',(119.937837,-54.120824,1.585)); +#233258 = LINE('',#233259,#233260); +#233259 = CARTESIAN_POINT('',(119.962384,-54.096277,1.585)); +#233260 = VECTOR('',#233261,1.); +#233261 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#233262 = ORIENTED_EDGE('',*,*,#233263,.T.); +#233263 = EDGE_CURVE('',#233256,#233264,#233266,.T.); +#233264 = VERTEX_POINT('',#233265); +#233265 = CARTESIAN_POINT('',(119.903168,-54.224832,1.585)); +#233266 = LINE('',#233267,#233268); +#233267 = CARTESIAN_POINT('',(119.937837,-54.120824,1.585)); +#233268 = VECTOR('',#233269,1.); +#233269 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#233270 = ORIENTED_EDGE('',*,*,#233271,.T.); +#233271 = EDGE_CURVE('',#233264,#233272,#233274,.T.); +#233272 = VERTEX_POINT('',#233273); +#233273 = CARTESIAN_POINT('',(119.903168,-54.449285,1.585)); +#233274 = LINE('',#233275,#233276); +#233275 = CARTESIAN_POINT('',(119.903168,-54.224832,1.585)); +#233276 = VECTOR('',#233277,1.); +#233277 = DIRECTION('',(0.,-1.,0.)); +#233278 = ORIENTED_EDGE('',*,*,#233279,.T.); +#233279 = EDGE_CURVE('',#233272,#233280,#233282,.T.); +#233280 = VERTEX_POINT('',#233281); +#233281 = CARTESIAN_POINT('',(120.244597,-54.449285,1.585)); +#233282 = LINE('',#233283,#233284); +#233283 = CARTESIAN_POINT('',(119.903168,-54.449285,1.585)); +#233284 = VECTOR('',#233285,1.); +#233285 = DIRECTION('',(1.,0.,0.)); +#233286 = ORIENTED_EDGE('',*,*,#233287,.T.); +#233287 = EDGE_CURVE('',#233280,#233288,#233290,.T.); +#233288 = VERTEX_POINT('',#233289); +#233289 = CARTESIAN_POINT('',(120.244597,-54.186772,1.585)); +#233290 = LINE('',#233291,#233292); +#233291 = CARTESIAN_POINT('',(120.244597,-54.449285,1.585)); +#233292 = VECTOR('',#233293,1.); +#233293 = DIRECTION('',(0.,1.,0.)); +#233294 = ORIENTED_EDGE('',*,*,#233295,.T.); +#233295 = EDGE_CURVE('',#233288,#233296,#233298,.T.); +#233296 = VERTEX_POINT('',#233297); +#233297 = CARTESIAN_POINT('',(120.213318,-54.124215,1.585)); +#233298 = LINE('',#233299,#233300); +#233299 = CARTESIAN_POINT('',(120.244597,-54.186772,1.585)); +#233300 = VECTOR('',#233301,1.); +#233301 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#233302 = ORIENTED_EDGE('',*,*,#233303,.T.); +#233303 = EDGE_CURVE('',#233296,#233245,#233304,.T.); +#233304 = LINE('',#233305,#233306); +#233305 = CARTESIAN_POINT('',(120.213318,-54.124215,1.585)); +#233306 = VECTOR('',#233307,1.); +#233307 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#233308 = PLANE('',#233309); +#233309 = AXIS2_PLACEMENT_3D('',#233310,#233311,#233312); +#233310 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233311 = DIRECTION('',(0.,0.,1.)); +#233312 = DIRECTION('',(1.,0.,-0.)); +#233313 = SHELL_BASED_SURFACE_MODEL('',(#233314)); +#233314 = OPEN_SHELL('',(#233315)); +#233315 = ADVANCED_FACE('',(#233316),#233557,.T.); +#233316 = FACE_BOUND('',#233317,.F.); +#233317 = EDGE_LOOP('',(#233318,#233329,#233337,#233345,#233353,#233361, + #233370,#233378,#233387,#233395,#233403,#233411,#233419,#233427, + #233435,#233444,#233452,#233460,#233468,#233476,#233485,#233493, + #233501,#233509,#233518,#233526,#233534,#233542,#233551)); +#233318 = ORIENTED_EDGE('',*,*,#233319,.T.); +#233319 = EDGE_CURVE('',#233320,#233322,#233324,.T.); +#233320 = VERTEX_POINT('',#233321); +#233321 = CARTESIAN_POINT('',(127.508882,-53.957142,1.585)); +#233322 = VERTEX_POINT('',#233323); +#233323 = CARTESIAN_POINT('',(127.573882,-53.892142,1.585)); +#233324 = CIRCLE('',#233325,6.500103935389E-02); +#233325 = AXIS2_PLACEMENT_3D('',#233326,#233327,#233328); +#233326 = CARTESIAN_POINT('',(127.57388303934,-53.95714303934,1.585)); +#233327 = DIRECTION('',(0.,0.,-1.)); +#233328 = DIRECTION('',(-0.999999999872,1.598967627357E-05,0.)); +#233329 = ORIENTED_EDGE('',*,*,#233330,.T.); +#233330 = EDGE_CURVE('',#233322,#233331,#233333,.T.); +#233331 = VERTEX_POINT('',#233332); +#233332 = CARTESIAN_POINT('',(127.873882,-53.892142,1.585)); +#233333 = LINE('',#233334,#233335); +#233334 = CARTESIAN_POINT('',(127.573882,-53.892142,1.585)); +#233335 = VECTOR('',#233336,1.); +#233336 = DIRECTION('',(1.,0.,0.)); +#233337 = ORIENTED_EDGE('',*,*,#233338,.T.); +#233338 = EDGE_CURVE('',#233331,#233339,#233341,.T.); +#233339 = VERTEX_POINT('',#233340); +#233340 = CARTESIAN_POINT('',(127.898756,-53.89709,1.585)); +#233341 = LINE('',#233342,#233343); +#233342 = CARTESIAN_POINT('',(127.873882,-53.892142,1.585)); +#233343 = VECTOR('',#233344,1.); +#233344 = DIRECTION('',(0.98078336573,-0.19509994748,0.)); +#233345 = ORIENTED_EDGE('',*,*,#233346,.T.); +#233346 = EDGE_CURVE('',#233339,#233347,#233349,.T.); +#233347 = VERTEX_POINT('',#233348); +#233348 = CARTESIAN_POINT('',(127.919843,-53.91118,1.585)); +#233349 = LINE('',#233350,#233351); +#233350 = CARTESIAN_POINT('',(127.898756,-53.89709,1.585)); +#233351 = VECTOR('',#233352,1.); +#233352 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#233353 = ORIENTED_EDGE('',*,*,#233354,.T.); +#233354 = EDGE_CURVE('',#233347,#233355,#233357,.T.); +#233355 = VERTEX_POINT('',#233356); +#233356 = CARTESIAN_POINT('',(127.971003,-53.966461,1.585)); +#233357 = LINE('',#233358,#233359); +#233358 = CARTESIAN_POINT('',(127.919843,-53.91118,1.585)); +#233359 = VECTOR('',#233360,1.); +#233360 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#233361 = ORIENTED_EDGE('',*,*,#233362,.T.); +#233362 = EDGE_CURVE('',#233355,#233363,#233365,.T.); +#233363 = VERTEX_POINT('',#233364); +#233364 = CARTESIAN_POINT('',(127.970999,-54.376399,1.585)); +#233365 = CIRCLE('',#233366,0.409312568567); +#233366 = AXIS2_PLACEMENT_3D('',#233367,#233368,#233369); +#233367 = CARTESIAN_POINT('',(127.61670664806,-54.17142654294,1.585)); +#233368 = DIRECTION('',(0.,0.,-1.)); +#233369 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#233370 = ORIENTED_EDGE('',*,*,#233371,.T.); +#233371 = EDGE_CURVE('',#233363,#233372,#233374,.T.); +#233372 = VERTEX_POINT('',#233373); +#233373 = CARTESIAN_POINT('',(127.868322,-54.480322,1.585)); +#233374 = LINE('',#233375,#233376); +#233375 = CARTESIAN_POINT('',(127.970999,-54.376399,1.585)); +#233376 = VECTOR('',#233377,1.); +#233377 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#233378 = ORIENTED_EDGE('',*,*,#233379,.T.); +#233379 = EDGE_CURVE('',#233372,#233380,#233382,.T.); +#233380 = VERTEX_POINT('',#233381); +#233381 = CARTESIAN_POINT('',(127.429546,-54.577344,1.585)); +#233382 = CIRCLE('',#233383,0.675422176574); +#233383 = AXIS2_PLACEMENT_3D('',#233384,#233385,#233386); +#233384 = CARTESIAN_POINT('',(127.51141275007,-53.90690164465,1.585)); +#233385 = DIRECTION('',(0.,0.,-1.)); +#233386 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#233387 = ORIENTED_EDGE('',*,*,#233388,.T.); +#233388 = EDGE_CURVE('',#233380,#233389,#233391,.T.); +#233389 = VERTEX_POINT('',#233390); +#233390 = CARTESIAN_POINT('',(127.244813,-54.529566,1.585)); +#233391 = LINE('',#233392,#233393); +#233392 = CARTESIAN_POINT('',(127.429546,-54.577344,1.585)); +#233393 = VECTOR('',#233394,1.); +#233394 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#233395 = ORIENTED_EDGE('',*,*,#233396,.T.); +#233396 = EDGE_CURVE('',#233389,#233397,#233399,.T.); +#233397 = VERTEX_POINT('',#233398); +#233398 = CARTESIAN_POINT('',(127.142206,-54.474533,1.585)); +#233399 = LINE('',#233400,#233401); +#233400 = CARTESIAN_POINT('',(127.244813,-54.529566,1.585)); +#233401 = VECTOR('',#233402,1.); +#233402 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#233403 = ORIENTED_EDGE('',*,*,#233404,.T.); +#233404 = EDGE_CURVE('',#233397,#233405,#233407,.T.); +#233405 = VERTEX_POINT('',#233406); +#233406 = CARTESIAN_POINT('',(127.048191,-54.376395,1.585)); +#233407 = LINE('',#233408,#233409); +#233408 = CARTESIAN_POINT('',(127.142206,-54.474533,1.585)); +#233409 = VECTOR('',#233410,1.); +#233410 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#233411 = ORIENTED_EDGE('',*,*,#233412,.T.); +#233412 = EDGE_CURVE('',#233405,#233413,#233415,.T.); +#233413 = VERTEX_POINT('',#233414); +#233414 = CARTESIAN_POINT('',(126.99663,-54.224507,1.585)); +#233415 = LINE('',#233416,#233417); +#233416 = CARTESIAN_POINT('',(127.048191,-54.376395,1.585)); +#233417 = VECTOR('',#233418,1.); +#233418 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#233419 = ORIENTED_EDGE('',*,*,#233420,.T.); +#233420 = EDGE_CURVE('',#233413,#233421,#233423,.T.); +#233421 = VERTEX_POINT('',#233422); +#233422 = CARTESIAN_POINT('',(126.997512,-54.071057,1.585)); +#233423 = LINE('',#233424,#233425); +#233424 = CARTESIAN_POINT('',(126.99663,-54.224507,1.585)); +#233425 = VECTOR('',#233426,1.); +#233426 = DIRECTION('',(5.747705643239E-03,0.999983481803,0.)); +#233427 = ORIENTED_EDGE('',*,*,#233428,.T.); +#233428 = EDGE_CURVE('',#233421,#233429,#233431,.T.); +#233429 = VERTEX_POINT('',#233430); +#233430 = CARTESIAN_POINT('',(127.044316,-53.97093,1.585)); +#233431 = LINE('',#233432,#233433); +#233432 = CARTESIAN_POINT('',(126.997512,-54.071057,1.585)); +#233433 = VECTOR('',#233434,1.); +#233434 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#233435 = ORIENTED_EDGE('',*,*,#233436,.T.); +#233436 = EDGE_CURVE('',#233429,#233437,#233439,.T.); +#233437 = VERTEX_POINT('',#233438); +#233438 = CARTESIAN_POINT('',(127.160592,-54.029068,1.585)); +#233439 = CIRCLE('',#233440,6.500026004258E-02); +#233440 = AXIS2_PLACEMENT_3D('',#233441,#233442,#233443); +#233441 = CARTESIAN_POINT('',(127.10245365279,-53.9999996944,1.585)); +#233442 = DIRECTION('',(0.,0.,-1.)); +#233443 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#233444 = ORIENTED_EDGE('',*,*,#233445,.T.); +#233445 = EDGE_CURVE('',#233437,#233446,#233448,.T.); +#233446 = VERTEX_POINT('',#233447); +#233447 = CARTESIAN_POINT('',(127.124597,-54.101058,1.585)); +#233448 = LINE('',#233449,#233450); +#233449 = CARTESIAN_POINT('',(127.160592,-54.029068,1.585)); +#233450 = VECTOR('',#233451,1.); +#233451 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#233452 = ORIENTED_EDGE('',*,*,#233453,.T.); +#233453 = EDGE_CURVE('',#233446,#233454,#233456,.T.); +#233454 = VERTEX_POINT('',#233455); +#233455 = CARTESIAN_POINT('',(127.124597,-54.203738,1.585)); +#233456 = LINE('',#233457,#233458); +#233457 = CARTESIAN_POINT('',(127.124597,-54.101058,1.585)); +#233458 = VECTOR('',#233459,1.); +#233459 = DIRECTION('',(0.,-1.,0.)); +#233460 = ORIENTED_EDGE('',*,*,#233461,.T.); +#233461 = EDGE_CURVE('',#233454,#233462,#233464,.T.); +#233462 = VERTEX_POINT('',#233463); +#233463 = CARTESIAN_POINT('',(127.159265,-54.307743,1.585)); +#233464 = LINE('',#233465,#233466); +#233465 = CARTESIAN_POINT('',(127.124597,-54.203738,1.585)); +#233466 = VECTOR('',#233467,1.); +#233467 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#233468 = ORIENTED_EDGE('',*,*,#233469,.T.); +#233469 = EDGE_CURVE('',#233462,#233470,#233472,.T.); +#233470 = VERTEX_POINT('',#233471); +#233471 = CARTESIAN_POINT('',(127.226669,-54.375149,1.585)); +#233472 = LINE('',#233473,#233474); +#233473 = CARTESIAN_POINT('',(127.159265,-54.307743,1.585)); +#233474 = VECTOR('',#233475,1.); +#233475 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#233476 = ORIENTED_EDGE('',*,*,#233477,.T.); +#233477 = EDGE_CURVE('',#233470,#233478,#233480,.T.); +#233478 = VERTEX_POINT('',#233479); +#233479 = CARTESIAN_POINT('',(127.565881,-54.449285,1.585)); +#233480 = CIRCLE('',#233481,0.553317785495); +#233481 = AXIS2_PLACEMENT_3D('',#233482,#233483,#233484); +#233482 = CARTESIAN_POINT('',(127.5084500839,-53.89895576979,1.585)); +#233483 = DIRECTION('',(0.,0.,1.)); +#233484 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#233485 = ORIENTED_EDGE('',*,*,#233486,.T.); +#233486 = EDGE_CURVE('',#233478,#233487,#233489,.T.); +#233487 = VERTEX_POINT('',#233488); +#233488 = CARTESIAN_POINT('',(127.722622,-54.410099,1.585)); +#233489 = LINE('',#233490,#233491); +#233490 = CARTESIAN_POINT('',(127.565881,-54.449285,1.585)); +#233491 = VECTOR('',#233492,1.); +#233492 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#233493 = ORIENTED_EDGE('',*,*,#233494,.T.); +#233494 = EDGE_CURVE('',#233487,#233495,#233497,.T.); +#233495 = VERTEX_POINT('',#233496); +#233496 = CARTESIAN_POINT('',(127.792522,-54.37515,1.585)); +#233497 = LINE('',#233498,#233499); +#233498 = CARTESIAN_POINT('',(127.722622,-54.410099,1.585)); +#233499 = VECTOR('',#233500,1.); +#233500 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#233501 = ORIENTED_EDGE('',*,*,#233502,.T.); +#233502 = EDGE_CURVE('',#233495,#233503,#233505,.T.); +#233503 = VERTEX_POINT('',#233504); +#233504 = CARTESIAN_POINT('',(127.859928,-54.307743,1.585)); +#233505 = LINE('',#233506,#233507); +#233506 = CARTESIAN_POINT('',(127.792522,-54.37515,1.585)); +#233507 = VECTOR('',#233508,1.); +#233508 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#233509 = ORIENTED_EDGE('',*,*,#233510,.T.); +#233510 = EDGE_CURVE('',#233503,#233511,#233513,.T.); +#233511 = VERTEX_POINT('',#233512); +#233512 = CARTESIAN_POINT('',(127.859928,-54.035111,1.585)); +#233513 = CIRCLE('',#233514,0.272194686174); +#233514 = AXIS2_PLACEMENT_3D('',#233515,#233516,#233517); +#233515 = CARTESIAN_POINT('',(127.62432686391,-54.171427,1.585)); +#233516 = DIRECTION('',(0.,-0.,1.)); +#233517 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#233518 = ORIENTED_EDGE('',*,*,#233519,.T.); +#233519 = EDGE_CURVE('',#233511,#233520,#233522,.T.); +#233520 = VERTEX_POINT('',#233521); +#233521 = CARTESIAN_POINT('',(127.846959,-54.022142,1.585)); +#233522 = LINE('',#233523,#233524); +#233523 = CARTESIAN_POINT('',(127.859928,-54.035111,1.585)); +#233524 = VECTOR('',#233525,1.); +#233525 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233526 = ORIENTED_EDGE('',*,*,#233527,.T.); +#233527 = EDGE_CURVE('',#233520,#233528,#233530,.T.); +#233528 = VERTEX_POINT('',#233529); +#233529 = CARTESIAN_POINT('',(127.638882,-54.022142,1.585)); +#233530 = LINE('',#233531,#233532); +#233531 = CARTESIAN_POINT('',(127.846959,-54.022142,1.585)); +#233532 = VECTOR('',#233533,1.); +#233533 = DIRECTION('',(-1.,0.,0.)); +#233534 = ORIENTED_EDGE('',*,*,#233535,.T.); +#233535 = EDGE_CURVE('',#233528,#233536,#233538,.T.); +#233536 = VERTEX_POINT('',#233537); +#233537 = CARTESIAN_POINT('',(127.638882,-54.128571,1.585)); +#233538 = LINE('',#233539,#233540); +#233539 = CARTESIAN_POINT('',(127.638882,-54.022142,1.585)); +#233540 = VECTOR('',#233541,1.); +#233541 = DIRECTION('',(0.,-1.,0.)); +#233542 = ORIENTED_EDGE('',*,*,#233543,.T.); +#233543 = EDGE_CURVE('',#233536,#233544,#233546,.T.); +#233544 = VERTEX_POINT('',#233545); +#233545 = CARTESIAN_POINT('',(127.508882,-54.128571,1.585)); +#233546 = CIRCLE('',#233547,6.500000000091E-02); +#233547 = AXIS2_PLACEMENT_3D('',#233548,#233549,#233550); +#233548 = CARTESIAN_POINT('',(127.573882,-54.12857065513,1.585)); +#233549 = DIRECTION('',(-0.,0.,-1.)); +#233550 = DIRECTION('',(0.999999999986,-5.305658134983E-06,-0.)); +#233551 = ORIENTED_EDGE('',*,*,#233552,.T.); +#233552 = EDGE_CURVE('',#233544,#233320,#233553,.T.); +#233553 = LINE('',#233554,#233555); +#233554 = CARTESIAN_POINT('',(127.508882,-54.128571,1.585)); +#233555 = VECTOR('',#233556,1.); +#233556 = DIRECTION('',(0.,1.,0.)); +#233557 = PLANE('',#233558); +#233558 = AXIS2_PLACEMENT_3D('',#233559,#233560,#233561); +#233559 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233560 = DIRECTION('',(0.,0.,1.)); +#233561 = DIRECTION('',(1.,0.,-0.)); +#233562 = SHELL_BASED_SURFACE_MODEL('',(#233563)); +#233563 = OPEN_SHELL('',(#233564)); +#233564 = ADVANCED_FACE('',(#233565),#233667,.T.); +#233565 = FACE_BOUND('',#233566,.F.); +#233566 = EDGE_LOOP('',(#233567,#233578,#233586,#233594,#233602,#233611, + #233619,#233627,#233636,#233644,#233653,#233661)); +#233567 = ORIENTED_EDGE('',*,*,#233568,.T.); +#233568 = EDGE_CURVE('',#233569,#233571,#233573,.T.); +#233569 = VERTEX_POINT('',#233570); +#233570 = CARTESIAN_POINT('',(134.699545,-54.046553,1.585)); +#233571 = VERTEX_POINT('',#233572); +#233572 = CARTESIAN_POINT('',(134.824597,-54.071427,1.585)); +#233573 = CIRCLE('',#233574,6.499988811649E-02); +#233574 = AXIS2_PLACEMENT_3D('',#233575,#233576,#233577); +#233575 = CARTESIAN_POINT('',(134.75959711188,-54.0714272701,1.585)); +#233576 = DIRECTION('',(0.,0.,-1.)); +#233577 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#233578 = ORIENTED_EDGE('',*,*,#233579,.T.); +#233579 = EDGE_CURVE('',#233571,#233580,#233582,.T.); +#233580 = VERTEX_POINT('',#233581); +#233581 = CARTESIAN_POINT('',(134.824597,-54.434999,1.585)); +#233582 = LINE('',#233583,#233584); +#233583 = CARTESIAN_POINT('',(134.824597,-54.071427,1.585)); +#233584 = VECTOR('',#233585,1.); +#233585 = DIRECTION('',(0.,-1.,0.)); +#233586 = ORIENTED_EDGE('',*,*,#233587,.T.); +#233587 = EDGE_CURVE('',#233580,#233588,#233590,.T.); +#233588 = VERTEX_POINT('',#233589); +#233589 = CARTESIAN_POINT('',(135.123168,-54.434999,1.585)); +#233590 = LINE('',#233591,#233592); +#233591 = CARTESIAN_POINT('',(134.824597,-54.434999,1.585)); +#233592 = VECTOR('',#233593,1.); +#233593 = DIRECTION('',(1.,0.,0.)); +#233594 = ORIENTED_EDGE('',*,*,#233595,.T.); +#233595 = EDGE_CURVE('',#233588,#233596,#233598,.T.); +#233596 = VERTEX_POINT('',#233597); +#233597 = CARTESIAN_POINT('',(135.123168,-54.199999,1.585)); +#233598 = LINE('',#233599,#233600); +#233599 = CARTESIAN_POINT('',(135.123168,-54.434999,1.585)); +#233600 = VECTOR('',#233601,1.); +#233601 = DIRECTION('',(0.,1.,0.)); +#233602 = ORIENTED_EDGE('',*,*,#233603,.T.); +#233603 = EDGE_CURVE('',#233596,#233604,#233606,.T.); +#233604 = VERTEX_POINT('',#233605); +#233605 = CARTESIAN_POINT('',(135.253168,-54.199999,1.585)); +#233606 = CIRCLE('',#233607,6.500000000092E-02); +#233607 = AXIS2_PLACEMENT_3D('',#233608,#233609,#233610); +#233608 = CARTESIAN_POINT('',(135.188168,-54.19999934486,1.585)); +#233609 = DIRECTION('',(0.,0.,-1.)); +#233610 = DIRECTION('',(-0.999999999986,5.305658244295E-06,0.)); +#233611 = ORIENTED_EDGE('',*,*,#233612,.T.); +#233612 = EDGE_CURVE('',#233604,#233613,#233615,.T.); +#233613 = VERTEX_POINT('',#233614); +#233614 = CARTESIAN_POINT('',(135.253168,-54.434999,1.585)); +#233615 = LINE('',#233616,#233617); +#233616 = CARTESIAN_POINT('',(135.253168,-54.199999,1.585)); +#233617 = VECTOR('',#233618,1.); +#233618 = DIRECTION('',(0.,-1.,0.)); +#233619 = ORIENTED_EDGE('',*,*,#233620,.T.); +#233620 = EDGE_CURVE('',#233613,#233621,#233623,.T.); +#233621 = VERTEX_POINT('',#233622); +#233622 = CARTESIAN_POINT('',(135.659597,-54.434999,1.585)); +#233623 = LINE('',#233624,#233625); +#233624 = CARTESIAN_POINT('',(135.253168,-54.434999,1.585)); +#233625 = VECTOR('',#233626,1.); +#233626 = DIRECTION('',(1.,0.,0.)); +#233627 = ORIENTED_EDGE('',*,*,#233628,.T.); +#233628 = EDGE_CURVE('',#233621,#233629,#233631,.T.); +#233629 = VERTEX_POINT('',#233630); +#233630 = CARTESIAN_POINT('',(135.659597,-54.564999,1.585)); +#233631 = CIRCLE('',#233632,6.500000000092E-02); +#233632 = AXIS2_PLACEMENT_3D('',#233633,#233634,#233635); +#233633 = CARTESIAN_POINT('',(135.65959665513,-54.499999,1.585)); +#233634 = DIRECTION('',(0.,0.,-1.)); +#233635 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#233636 = ORIENTED_EDGE('',*,*,#233637,.T.); +#233637 = EDGE_CURVE('',#233629,#233638,#233640,.T.); +#233638 = VERTEX_POINT('',#233639); +#233639 = CARTESIAN_POINT('',(134.759597,-54.564999,1.585)); +#233640 = LINE('',#233641,#233642); +#233641 = CARTESIAN_POINT('',(135.659597,-54.564999,1.585)); +#233642 = VECTOR('',#233643,1.); +#233643 = DIRECTION('',(-1.,0.,0.)); +#233644 = ORIENTED_EDGE('',*,*,#233645,.T.); +#233645 = EDGE_CURVE('',#233638,#233646,#233648,.T.); +#233646 = VERTEX_POINT('',#233647); +#233647 = CARTESIAN_POINT('',(134.694597,-54.499999,1.585)); +#233648 = CIRCLE('',#233649,6.500103935391E-02); +#233649 = AXIS2_PLACEMENT_3D('',#233650,#233651,#233652); +#233650 = CARTESIAN_POINT('',(134.75959803934,-54.49999796065,1.585)); +#233651 = DIRECTION('',(0.,0.,-1.)); +#233652 = DIRECTION('',(-1.598967605494E-05,-0.999999999872,-0.)); +#233653 = ORIENTED_EDGE('',*,*,#233654,.T.); +#233654 = EDGE_CURVE('',#233646,#233655,#233657,.T.); +#233655 = VERTEX_POINT('',#233656); +#233656 = CARTESIAN_POINT('',(134.694597,-54.071427,1.585)); +#233657 = LINE('',#233658,#233659); +#233658 = CARTESIAN_POINT('',(134.694597,-54.499999,1.585)); +#233659 = VECTOR('',#233660,1.); +#233660 = DIRECTION('',(0.,1.,0.)); +#233661 = ORIENTED_EDGE('',*,*,#233662,.T.); +#233662 = EDGE_CURVE('',#233655,#233569,#233663,.T.); +#233663 = LINE('',#233664,#233665); +#233664 = CARTESIAN_POINT('',(134.694597,-54.071427,1.585)); +#233665 = VECTOR('',#233666,1.); +#233666 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#233667 = PLANE('',#233668); +#233668 = AXIS2_PLACEMENT_3D('',#233669,#233670,#233671); +#233669 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233670 = DIRECTION('',(0.,0.,1.)); +#233671 = DIRECTION('',(1.,0.,-0.)); +#233672 = SHELL_BASED_SURFACE_MODEL('',(#233673)); +#233673 = OPEN_SHELL('',(#233674)); +#233674 = ADVANCED_FACE('',(#233675,#233776),#233835,.T.); +#233675 = FACE_BOUND('',#233676,.F.); +#233676 = EDGE_LOOP('',(#233677,#233688,#233696,#233704,#233712,#233720, + #233728,#233737,#233745,#233754,#233762,#233770)); +#233677 = ORIENTED_EDGE('',*,*,#233678,.T.); +#233678 = EDGE_CURVE('',#233679,#233681,#233683,.T.); +#233679 = VERTEX_POINT('',#233680); +#233680 = CARTESIAN_POINT('',(121.958013,-53.969675,1.585)); +#233681 = VERTEX_POINT('',#233682); +#233682 = CARTESIAN_POINT('',(122.238666,-53.920432,1.585)); +#233683 = CIRCLE('',#233684,0.327183487819); +#233684 = AXIS2_PLACEMENT_3D('',#233685,#233686,#233687); +#233685 = CARTESIAN_POINT('',(122.14924076591,-54.23515753472,1.585)); +#233686 = DIRECTION('',(0.,0.,-1.)); +#233687 = DIRECTION('',(-0.584466432542,0.811417888163,0.)); +#233688 = ORIENTED_EDGE('',*,*,#233689,.T.); +#233689 = EDGE_CURVE('',#233681,#233690,#233692,.T.); +#233690 = VERTEX_POINT('',#233691); +#233691 = CARTESIAN_POINT('',(122.341273,-53.975465,1.585)); +#233692 = LINE('',#233693,#233694); +#233693 = CARTESIAN_POINT('',(122.238666,-53.920432,1.585)); +#233694 = VECTOR('',#233695,1.); +#233695 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#233696 = ORIENTED_EDGE('',*,*,#233697,.T.); +#233697 = EDGE_CURVE('',#233690,#233698,#233700,.T.); +#233698 = VERTEX_POINT('',#233699); +#233699 = CARTESIAN_POINT('',(122.396306,-54.035215,1.585)); +#233700 = LINE('',#233701,#233702); +#233701 = CARTESIAN_POINT('',(122.341273,-53.975465,1.585)); +#233702 = VECTOR('',#233703,1.); +#233703 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#233704 = ORIENTED_EDGE('',*,*,#233705,.T.); +#233705 = EDGE_CURVE('',#233698,#233706,#233708,.T.); +#233706 = VERTEX_POINT('',#233707); +#233707 = CARTESIAN_POINT('',(122.443109,-54.135342,1.585)); +#233708 = LINE('',#233709,#233710); +#233709 = CARTESIAN_POINT('',(122.396306,-54.035215,1.585)); +#233710 = VECTOR('',#233711,1.); +#233711 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#233712 = ORIENTED_EDGE('',*,*,#233713,.T.); +#233713 = EDGE_CURVE('',#233706,#233714,#233716,.T.); +#233714 = VERTEX_POINT('',#233715); +#233715 = CARTESIAN_POINT('',(122.446025,-54.427856,1.585)); +#233716 = LINE('',#233717,#233718); +#233717 = CARTESIAN_POINT('',(122.443109,-54.135342,1.585)); +#233718 = VECTOR('',#233719,1.); +#233719 = DIRECTION('',(9.968258341542E-03,-0.999950315679,0.)); +#233720 = ORIENTED_EDGE('',*,*,#233721,.T.); +#233721 = EDGE_CURVE('',#233714,#233722,#233724,.T.); +#233722 = VERTEX_POINT('',#233723); +#233723 = CARTESIAN_POINT('',(122.809597,-54.427856,1.585)); +#233724 = LINE('',#233725,#233726); +#233725 = CARTESIAN_POINT('',(122.446025,-54.427856,1.585)); +#233726 = VECTOR('',#233727,1.); +#233727 = DIRECTION('',(1.,0.,0.)); +#233728 = ORIENTED_EDGE('',*,*,#233729,.T.); +#233729 = EDGE_CURVE('',#233722,#233730,#233732,.T.); +#233730 = VERTEX_POINT('',#233731); +#233731 = CARTESIAN_POINT('',(122.809597,-54.557856,1.585)); +#233732 = CIRCLE('',#233733,6.500000000092E-02); +#233733 = AXIS2_PLACEMENT_3D('',#233734,#233735,#233736); +#233734 = CARTESIAN_POINT('',(122.80959665513,-54.492856,1.585)); +#233735 = DIRECTION('',(0.,0.,-1.)); +#233736 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#233737 = ORIENTED_EDGE('',*,*,#233738,.T.); +#233738 = EDGE_CURVE('',#233730,#233739,#233741,.T.); +#233739 = VERTEX_POINT('',#233740); +#233740 = CARTESIAN_POINT('',(121.909597,-54.557856,1.585)); +#233741 = LINE('',#233742,#233743); +#233742 = CARTESIAN_POINT('',(122.809597,-54.557856,1.585)); +#233743 = VECTOR('',#233744,1.); +#233744 = DIRECTION('',(-1.,0.,0.)); +#233745 = ORIENTED_EDGE('',*,*,#233746,.T.); +#233746 = EDGE_CURVE('',#233739,#233747,#233749,.T.); +#233747 = VERTEX_POINT('',#233748); +#233748 = CARTESIAN_POINT('',(121.844597,-54.492856,1.585)); +#233749 = CIRCLE('',#233750,6.500103935389E-02); +#233750 = AXIS2_PLACEMENT_3D('',#233751,#233752,#233753); +#233751 = CARTESIAN_POINT('',(121.90959803934,-54.49285496065,1.585)); +#233752 = DIRECTION('',(0.,0.,-1.)); +#233753 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#233754 = ORIENTED_EDGE('',*,*,#233755,.T.); +#233755 = EDGE_CURVE('',#233747,#233756,#233758,.T.); +#233756 = VERTEX_POINT('',#233757); +#233757 = CARTESIAN_POINT('',(121.847512,-54.135342,1.585)); +#233758 = LINE('',#233759,#233760); +#233759 = CARTESIAN_POINT('',(121.844597,-54.492856,1.585)); +#233760 = VECTOR('',#233761,1.); +#233761 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#233762 = ORIENTED_EDGE('',*,*,#233763,.T.); +#233763 = EDGE_CURVE('',#233756,#233764,#233766,.T.); +#233764 = VERTEX_POINT('',#233765); +#233765 = CARTESIAN_POINT('',(121.900702,-54.026986,1.585)); +#233766 = LINE('',#233767,#233768); +#233767 = CARTESIAN_POINT('',(121.847512,-54.135342,1.585)); +#233768 = VECTOR('',#233769,1.); +#233769 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#233770 = ORIENTED_EDGE('',*,*,#233771,.T.); +#233771 = EDGE_CURVE('',#233764,#233679,#233772,.T.); +#233772 = LINE('',#233773,#233774); +#233773 = CARTESIAN_POINT('',(121.900702,-54.026986,1.585)); +#233774 = VECTOR('',#233775,1.); +#233775 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233776 = FACE_BOUND('',#233777,.F.); +#233777 = EDGE_LOOP('',(#233778,#233789,#233797,#233805,#233813,#233821, + #233829)); +#233778 = ORIENTED_EDGE('',*,*,#233779,.T.); +#233779 = EDGE_CURVE('',#233780,#233782,#233784,.T.); +#233780 = VERTEX_POINT('',#233781); +#233781 = CARTESIAN_POINT('',(122.256808,-54.074848,1.585)); +#233782 = VERTEX_POINT('',#233783); +#233783 = CARTESIAN_POINT('',(122.005875,-54.102786,1.585)); +#233784 = CIRCLE('',#233785,0.180979134862); +#233785 = AXIS2_PLACEMENT_3D('',#233786,#233787,#233788); +#233786 = CARTESIAN_POINT('',(122.14569076987,-54.21769900078,1.585)); +#233787 = DIRECTION('',(0.,0.,1.)); +#233788 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#233789 = ORIENTED_EDGE('',*,*,#233790,.T.); +#233790 = EDGE_CURVE('',#233782,#233791,#233793,.T.); +#233791 = VERTEX_POINT('',#233792); +#233792 = CARTESIAN_POINT('',(121.974597,-54.165343,1.585)); +#233793 = LINE('',#233794,#233795); +#233794 = CARTESIAN_POINT('',(122.005875,-54.102786,1.585)); +#233795 = VECTOR('',#233796,1.); +#233796 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#233797 = ORIENTED_EDGE('',*,*,#233798,.T.); +#233798 = EDGE_CURVE('',#233791,#233799,#233801,.T.); +#233799 = VERTEX_POINT('',#233800); +#233800 = CARTESIAN_POINT('',(121.974597,-54.427856,1.585)); +#233801 = LINE('',#233802,#233803); +#233802 = CARTESIAN_POINT('',(121.974597,-54.165343,1.585)); +#233803 = VECTOR('',#233804,1.); +#233804 = DIRECTION('',(0.,-1.,0.)); +#233805 = ORIENTED_EDGE('',*,*,#233806,.T.); +#233806 = EDGE_CURVE('',#233799,#233807,#233809,.T.); +#233807 = VERTEX_POINT('',#233808); +#233808 = CARTESIAN_POINT('',(122.316025,-54.427856,1.585)); +#233809 = LINE('',#233810,#233811); +#233810 = CARTESIAN_POINT('',(121.974597,-54.427856,1.585)); +#233811 = VECTOR('',#233812,1.); +#233812 = DIRECTION('',(1.,0.,0.)); +#233813 = ORIENTED_EDGE('',*,*,#233814,.T.); +#233814 = EDGE_CURVE('',#233807,#233815,#233817,.T.); +#233815 = VERTEX_POINT('',#233816); +#233816 = CARTESIAN_POINT('',(122.316025,-54.165343,1.585)); +#233817 = LINE('',#233818,#233819); +#233818 = CARTESIAN_POINT('',(122.316025,-54.427856,1.585)); +#233819 = VECTOR('',#233820,1.); +#233820 = DIRECTION('',(0.,1.,0.)); +#233821 = ORIENTED_EDGE('',*,*,#233822,.T.); +#233822 = EDGE_CURVE('',#233815,#233823,#233825,.T.); +#233823 = VERTEX_POINT('',#233824); +#233824 = CARTESIAN_POINT('',(122.284746,-54.102786,1.585)); +#233825 = LINE('',#233826,#233827); +#233826 = CARTESIAN_POINT('',(122.316025,-54.165343,1.585)); +#233827 = VECTOR('',#233828,1.); +#233828 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#233829 = ORIENTED_EDGE('',*,*,#233830,.T.); +#233830 = EDGE_CURVE('',#233823,#233780,#233831,.T.); +#233831 = LINE('',#233832,#233833); +#233832 = CARTESIAN_POINT('',(122.284746,-54.102786,1.585)); +#233833 = VECTOR('',#233834,1.); +#233834 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#233835 = PLANE('',#233836); +#233836 = AXIS2_PLACEMENT_3D('',#233837,#233838,#233839); +#233837 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233838 = DIRECTION('',(0.,0.,1.)); +#233839 = DIRECTION('',(1.,0.,-0.)); +#233840 = SHELL_BASED_SURFACE_MODEL('',(#233841)); +#233841 = OPEN_SHELL('',(#233842)); +#233842 = ADVANCED_FACE('',(#233843),#233879,.T.); +#233843 = FACE_BOUND('',#233844,.F.); +#233844 = EDGE_LOOP('',(#233845,#233856,#233864,#233873)); +#233845 = ORIENTED_EDGE('',*,*,#233846,.T.); +#233846 = EDGE_CURVE('',#233847,#233849,#233851,.T.); +#233847 = VERTEX_POINT('',#233848); +#233848 = CARTESIAN_POINT('',(132.099597,-54.486428,1.585)); +#233849 = VERTEX_POINT('',#233850); +#233850 = CARTESIAN_POINT('',(132.099597,-54.356428,1.585)); +#233851 = CIRCLE('',#233852,6.500000000092E-02); +#233852 = AXIS2_PLACEMENT_3D('',#233853,#233854,#233855); +#233853 = CARTESIAN_POINT('',(132.09959734486,-54.421428,1.585)); +#233854 = DIRECTION('',(0.,0.,-1.)); +#233855 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#233856 = ORIENTED_EDGE('',*,*,#233857,.T.); +#233857 = EDGE_CURVE('',#233849,#233858,#233860,.T.); +#233858 = VERTEX_POINT('',#233859); +#233859 = CARTESIAN_POINT('',(132.999597,-54.356428,1.585)); +#233860 = LINE('',#233861,#233862); +#233861 = CARTESIAN_POINT('',(132.099597,-54.356428,1.585)); +#233862 = VECTOR('',#233863,1.); +#233863 = DIRECTION('',(1.,0.,0.)); +#233864 = ORIENTED_EDGE('',*,*,#233865,.T.); +#233865 = EDGE_CURVE('',#233858,#233866,#233868,.T.); +#233866 = VERTEX_POINT('',#233867); +#233867 = CARTESIAN_POINT('',(132.999597,-54.486428,1.585)); +#233868 = CIRCLE('',#233869,6.500000000091E-02); +#233869 = AXIS2_PLACEMENT_3D('',#233870,#233871,#233872); +#233870 = CARTESIAN_POINT('',(132.99959665513,-54.421428,1.585)); +#233871 = DIRECTION('',(0.,0.,-1.)); +#233872 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#233873 = ORIENTED_EDGE('',*,*,#233874,.T.); +#233874 = EDGE_CURVE('',#233866,#233847,#233875,.T.); +#233875 = LINE('',#233876,#233877); +#233876 = CARTESIAN_POINT('',(132.999597,-54.486428,1.585)); +#233877 = VECTOR('',#233878,1.); +#233878 = DIRECTION('',(-1.,0.,0.)); +#233879 = PLANE('',#233880); +#233880 = AXIS2_PLACEMENT_3D('',#233881,#233882,#233883); +#233881 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233882 = DIRECTION('',(0.,0.,1.)); +#233883 = DIRECTION('',(1.,0.,-0.)); +#233884 = SHELL_BASED_SURFACE_MODEL('',(#233885)); +#233885 = OPEN_SHELL('',(#233886)); +#233886 = ADVANCED_FACE('',(#233887),#234089,.T.); +#233887 = FACE_BOUND('',#233888,.F.); +#233888 = EDGE_LOOP('',(#233889,#233900,#233908,#233916,#233924,#233932, + #233941,#233949,#233958,#233966,#233975,#233983,#233992,#234000, + #234009,#234017,#234026,#234034,#234042,#234050,#234059,#234067, + #234075,#234083)); +#233889 = ORIENTED_EDGE('',*,*,#233890,.T.); +#233890 = EDGE_CURVE('',#233891,#233893,#233895,.T.); +#233891 = VERTEX_POINT('',#233892); +#233892 = CARTESIAN_POINT('',(129.840369,-54.013914,1.585)); +#233893 = VERTEX_POINT('',#233894); +#233894 = CARTESIAN_POINT('',(130.059225,-53.795057,1.585)); +#233895 = CIRCLE('',#233896,0.308109459502); +#233896 = AXIS2_PLACEMENT_3D('',#233897,#233898,#233899); +#233897 = CARTESIAN_POINT('',(130.13818845359,-54.09287609279,1.585)); +#233898 = DIRECTION('',(0.,0.,-1.)); +#233899 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#233900 = ORIENTED_EDGE('',*,*,#233901,.T.); +#233901 = EDGE_CURVE('',#233893,#233902,#233904,.T.); +#233902 = VERTEX_POINT('',#233903); +#233903 = CARTESIAN_POINT('',(130.291361,-53.792777,1.585)); +#233904 = LINE('',#233905,#233906); +#233905 = CARTESIAN_POINT('',(130.059225,-53.795057,1.585)); +#233906 = VECTOR('',#233907,1.); +#233907 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#233908 = ORIENTED_EDGE('',*,*,#233909,.T.); +#233909 = EDGE_CURVE('',#233902,#233910,#233912,.T.); +#233910 = VERTEX_POINT('',#233911); +#233911 = CARTESIAN_POINT('',(130.317237,-53.799004,1.585)); +#233912 = LINE('',#233913,#233914); +#233913 = CARTESIAN_POINT('',(130.291361,-53.792777,1.585)); +#233914 = VECTOR('',#233915,1.); +#233915 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#233916 = ORIENTED_EDGE('',*,*,#233917,.T.); +#233917 = EDGE_CURVE('',#233910,#233918,#233920,.T.); +#233918 = VERTEX_POINT('',#233919); +#233919 = CARTESIAN_POINT('',(130.419844,-53.854037,1.585)); +#233920 = LINE('',#233921,#233922); +#233921 = CARTESIAN_POINT('',(130.317237,-53.799004,1.585)); +#233922 = VECTOR('',#233923,1.); +#233923 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#233924 = ORIENTED_EDGE('',*,*,#233925,.T.); +#233925 = EDGE_CURVE('',#233918,#233926,#233928,.T.); +#233926 = VERTEX_POINT('',#233927); +#233927 = CARTESIAN_POINT('',(130.474878,-53.913788,1.585)); +#233928 = LINE('',#233929,#233930); +#233929 = CARTESIAN_POINT('',(130.419844,-53.854037,1.585)); +#233930 = VECTOR('',#233931,1.); +#233931 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#233932 = ORIENTED_EDGE('',*,*,#233933,.T.); +#233933 = EDGE_CURVE('',#233926,#233934,#233936,.T.); +#233934 = VERTEX_POINT('',#233935); +#233935 = CARTESIAN_POINT('',(130.468491,-54.365868,1.585)); +#233936 = CIRCLE('',#233937,0.407997408492); +#233937 = AXIS2_PLACEMENT_3D('',#233938,#233939,#233940); +#233938 = CARTESIAN_POINT('',(130.1320750414,-54.13502998723,1.585)); +#233939 = DIRECTION('',(0.,0.,-1.)); +#233940 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#233941 = ORIENTED_EDGE('',*,*,#233942,.T.); +#233942 = EDGE_CURVE('',#233934,#233943,#233945,.T.); +#233943 = VERTEX_POINT('',#233944); +#233944 = CARTESIAN_POINT('',(130.419843,-54.41739,1.585)); +#233945 = LINE('',#233946,#233947); +#233946 = CARTESIAN_POINT('',(130.468491,-54.365868,1.585)); +#233947 = VECTOR('',#233948,1.); +#233948 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#233949 = ORIENTED_EDGE('',*,*,#233950,.T.); +#233950 = EDGE_CURVE('',#233943,#233951,#233953,.T.); +#233951 = VERTEX_POINT('',#233952); +#233952 = CARTESIAN_POINT('',(130.327921,-54.325466,1.585)); +#233953 = CIRCLE('',#233954,6.499937665136E-02); +#233954 = AXIS2_PLACEMENT_3D('',#233955,#233956,#233957); +#233955 = CARTESIAN_POINT('',(130.37388218097,-54.37142781902,1.585)); +#233956 = DIRECTION('',(-0.,0.,-1.)); +#233957 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#233958 = ORIENTED_EDGE('',*,*,#233959,.T.); +#233959 = EDGE_CURVE('',#233951,#233960,#233962,.T.); +#233960 = VERTEX_POINT('',#233961); +#233961 = CARTESIAN_POINT('',(130.363319,-54.290068,1.585)); +#233962 = LINE('',#233963,#233964); +#233963 = CARTESIAN_POINT('',(130.327921,-54.325466,1.585)); +#233964 = VECTOR('',#233965,1.); +#233965 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#233966 = ORIENTED_EDGE('',*,*,#233967,.T.); +#233967 = EDGE_CURVE('',#233960,#233968,#233970,.T.); +#233968 = VERTEX_POINT('',#233969); +#233969 = CARTESIAN_POINT('',(130.363319,-53.98136,1.585)); +#233970 = CIRCLE('',#233971,0.277419178293); +#233971 = AXIS2_PLACEMENT_3D('',#233972,#233973,#233974); +#233972 = CARTESIAN_POINT('',(130.132806,-54.135714,1.585)); +#233973 = DIRECTION('',(0.,-0.,1.)); +#233974 = DIRECTION('',(0.830919482272,-0.556392679661,-0.)); +#233975 = ORIENTED_EDGE('',*,*,#233976,.T.); +#233976 = EDGE_CURVE('',#233968,#233977,#233979,.T.); +#233977 = VERTEX_POINT('',#233978); +#233978 = CARTESIAN_POINT('',(130.335379,-53.95342,1.585)); +#233979 = LINE('',#233980,#233981); +#233980 = CARTESIAN_POINT('',(130.363319,-53.98136,1.585)); +#233981 = VECTOR('',#233982,1.); +#233982 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233983 = ORIENTED_EDGE('',*,*,#233984,.T.); +#233984 = EDGE_CURVE('',#233977,#233985,#233987,.T.); +#233985 = VERTEX_POINT('',#233986); +#233986 = CARTESIAN_POINT('',(130.026671,-53.95342,1.585)); +#233987 = CIRCLE('',#233988,0.277419178293); +#233988 = AXIS2_PLACEMENT_3D('',#233989,#233990,#233991); +#233989 = CARTESIAN_POINT('',(130.181025,-54.183933,1.585)); +#233990 = DIRECTION('',(0.,0.,1.)); +#233991 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#233992 = ORIENTED_EDGE('',*,*,#233993,.T.); +#233993 = EDGE_CURVE('',#233985,#233994,#233996,.T.); +#233994 = VERTEX_POINT('',#233995); +#233995 = CARTESIAN_POINT('',(129.998733,-53.981358,1.585)); +#233996 = LINE('',#233997,#233998); +#233997 = CARTESIAN_POINT('',(130.026671,-53.95342,1.585)); +#233998 = VECTOR('',#233999,1.); +#233999 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#234000 = ORIENTED_EDGE('',*,*,#234001,.T.); +#234001 = EDGE_CURVE('',#233994,#234002,#234004,.T.); +#234002 = VERTEX_POINT('',#234003); +#234003 = CARTESIAN_POINT('',(129.998732,-54.290068,1.585)); +#234004 = CIRCLE('',#234005,0.277420975587); +#234005 = AXIS2_PLACEMENT_3D('',#234006,#234007,#234008); +#234006 = CARTESIAN_POINT('',(130.2292469934,-54.1357137467,1.585)); +#234007 = DIRECTION('',(0.,0.,1.)); +#234008 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#234009 = ORIENTED_EDGE('',*,*,#234010,.T.); +#234010 = EDGE_CURVE('',#234002,#234011,#234013,.T.); +#234011 = VERTEX_POINT('',#234012); +#234012 = CARTESIAN_POINT('',(130.03413,-54.325466,1.585)); +#234013 = LINE('',#234014,#234015); +#234014 = CARTESIAN_POINT('',(129.998732,-54.290068,1.585)); +#234015 = VECTOR('',#234016,1.); +#234016 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#234017 = ORIENTED_EDGE('',*,*,#234018,.T.); +#234018 = EDGE_CURVE('',#234011,#234019,#234021,.T.); +#234019 = VERTEX_POINT('',#234020); +#234020 = CARTESIAN_POINT('',(129.981701,-54.436105,1.585)); +#234021 = CIRCLE('',#234022,6.499980032118E-02); +#234022 = AXIS2_PLACEMENT_3D('',#234023,#234024,#234025); +#234023 = CARTESIAN_POINT('',(129.98816812219,-54.37142772136,1.585)); +#234024 = DIRECTION('',(0.,0.,-1.)); +#234025 = DIRECTION('',(0.707107984622,0.707105577749,0.)); +#234026 = ORIENTED_EDGE('',*,*,#234027,.T.); +#234027 = EDGE_CURVE('',#234019,#234028,#234030,.T.); +#234028 = VERTEX_POINT('',#234029); +#234029 = CARTESIAN_POINT('',(129.534723,-54.388623,1.585)); +#234030 = LINE('',#234031,#234032); +#234031 = CARTESIAN_POINT('',(129.981701,-54.436105,1.585)); +#234032 = VECTOR('',#234033,1.); +#234033 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#234034 = ORIENTED_EDGE('',*,*,#234035,.T.); +#234035 = EDGE_CURVE('',#234028,#234036,#234038,.T.); +#234036 = VERTEX_POINT('',#234037); +#234037 = CARTESIAN_POINT('',(129.497368,-54.347346,1.585)); +#234038 = LINE('',#234039,#234040); +#234039 = CARTESIAN_POINT('',(129.534723,-54.388623,1.585)); +#234040 = VECTOR('',#234041,1.); +#234041 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#234042 = ORIENTED_EDGE('',*,*,#234043,.T.); +#234043 = EDGE_CURVE('',#234036,#234044,#234046,.T.); +#234044 = VERTEX_POINT('',#234045); +#234045 = CARTESIAN_POINT('',(129.494597,-53.899999,1.585)); +#234046 = LINE('',#234047,#234048); +#234047 = CARTESIAN_POINT('',(129.497368,-54.347346,1.585)); +#234048 = VECTOR('',#234049,1.); +#234049 = DIRECTION('',(-6.194177765462E-03,0.999980815897,0.)); +#234050 = ORIENTED_EDGE('',*,*,#234051,.T.); +#234051 = EDGE_CURVE('',#234044,#234052,#234054,.T.); +#234052 = VERTEX_POINT('',#234053); +#234053 = CARTESIAN_POINT('',(129.624597,-53.899999,1.585)); +#234054 = CIRCLE('',#234055,6.500000000091E-02); +#234055 = AXIS2_PLACEMENT_3D('',#234056,#234057,#234058); +#234056 = CARTESIAN_POINT('',(129.559597,-53.89999934486,1.585)); +#234057 = DIRECTION('',(0.,0.,-1.)); +#234058 = DIRECTION('',(-0.999999999986,5.305658244297E-06,0.)); +#234059 = ORIENTED_EDGE('',*,*,#234060,.T.); +#234060 = EDGE_CURVE('',#234052,#234061,#234063,.T.); +#234061 = VERTEX_POINT('',#234062); +#234062 = CARTESIAN_POINT('',(129.624597,-54.269747,1.585)); +#234063 = LINE('',#234064,#234065); +#234064 = CARTESIAN_POINT('',(129.624597,-53.899999,1.585)); +#234065 = VECTOR('',#234066,1.); +#234066 = DIRECTION('',(0.,-1.,0.)); +#234067 = ORIENTED_EDGE('',*,*,#234068,.T.); +#234068 = EDGE_CURVE('',#234061,#234069,#234071,.T.); +#234069 = VERTEX_POINT('',#234070); +#234070 = CARTESIAN_POINT('',(129.854733,-54.29276,1.585)); +#234071 = LINE('',#234072,#234073); +#234072 = CARTESIAN_POINT('',(129.624597,-54.269747,1.585)); +#234073 = VECTOR('',#234074,1.); +#234074 = DIRECTION('',(0.99503744706,-9.950115049007E-02,0.)); +#234075 = ORIENTED_EDGE('',*,*,#234076,.T.); +#234076 = EDGE_CURVE('',#234069,#234077,#234079,.T.); +#234077 = VERTEX_POINT('',#234078); +#234078 = CARTESIAN_POINT('',(129.837618,-54.247465,1.585)); +#234079 = LINE('',#234080,#234081); +#234080 = CARTESIAN_POINT('',(129.854733,-54.29276,1.585)); +#234081 = VECTOR('',#234082,1.); +#234082 = DIRECTION('',(-0.353464827548,0.935447815587,0.)); +#234083 = ORIENTED_EDGE('',*,*,#234084,.T.); +#234084 = EDGE_CURVE('',#234077,#233891,#234085,.T.); +#234085 = LINE('',#234086,#234087); +#234086 = CARTESIAN_POINT('',(129.837618,-54.247465,1.585)); +#234087 = VECTOR('',#234088,1.); +#234088 = DIRECTION('',(1.177819480953E-02,0.999930634658,0.)); +#234089 = PLANE('',#234090); +#234090 = AXIS2_PLACEMENT_3D('',#234091,#234092,#234093); +#234091 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234092 = DIRECTION('',(0.,0.,1.)); +#234093 = DIRECTION('',(1.,0.,-0.)); +#234094 = SHELL_BASED_SURFACE_MODEL('',(#234095)); +#234095 = OPEN_SHELL('',(#234096)); +#234096 = ADVANCED_FACE('',(#234097,#234199),#234267,.T.); +#234097 = FACE_BOUND('',#234098,.F.); +#234098 = EDGE_LOOP('',(#234099,#234110,#234118,#234126,#234134,#234143, + #234151,#234159,#234168,#234176,#234185,#234193)); +#234099 = ORIENTED_EDGE('',*,*,#234100,.T.); +#234100 = EDGE_CURVE('',#234101,#234103,#234105,.T.); +#234101 = VERTEX_POINT('',#234102); +#234102 = CARTESIAN_POINT('',(159.43527,-53.8623,1.585)); +#234103 = VERTEX_POINT('',#234104); +#234104 = CARTESIAN_POINT('',(159.431742,-53.775436,1.585)); +#234105 = CIRCLE('',#234106,7.226649079681E-02); +#234106 = AXIS2_PLACEMENT_3D('',#234107,#234108,#234109); +#234107 = CARTESIAN_POINT('',(159.49119054153,-53.81652512996,1.585)); +#234108 = DIRECTION('',(0.,0.,-1.)); +#234109 = DIRECTION('',(-0.773810114734,-0.633417639741,-0.)); +#234110 = ORIENTED_EDGE('',*,*,#234111,.T.); +#234111 = EDGE_CURVE('',#234103,#234112,#234114,.T.); +#234112 = VERTEX_POINT('',#234113); +#234113 = CARTESIAN_POINT('',(159.452434,-53.754744,1.585)); +#234114 = LINE('',#234115,#234116); +#234115 = CARTESIAN_POINT('',(159.431742,-53.775436,1.585)); +#234116 = VECTOR('',#234117,1.); +#234117 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#234118 = ORIENTED_EDGE('',*,*,#234119,.T.); +#234119 = EDGE_CURVE('',#234112,#234120,#234122,.T.); +#234120 = VERTEX_POINT('',#234121); +#234121 = CARTESIAN_POINT('',(159.494102,-53.742104,1.585)); +#234122 = LINE('',#234123,#234124); +#234123 = CARTESIAN_POINT('',(159.452434,-53.754744,1.585)); +#234124 = VECTOR('',#234125,1.); +#234125 = DIRECTION('',(0.956939376321,0.29028783999,0.)); +#234126 = ORIENTED_EDGE('',*,*,#234127,.T.); +#234127 = EDGE_CURVE('',#234120,#234128,#234130,.T.); +#234128 = VERTEX_POINT('',#234129); +#234129 = CARTESIAN_POINT('',(160.508734,-53.743545,1.585)); +#234130 = LINE('',#234131,#234132); +#234131 = CARTESIAN_POINT('',(159.494102,-53.742104,1.585)); +#234132 = VECTOR('',#234133,1.); +#234133 = DIRECTION('',(0.99999899149,-1.420217918158E-03,0.)); +#234134 = ORIENTED_EDGE('',*,*,#234135,.T.); +#234135 = EDGE_CURVE('',#234128,#234136,#234138,.T.); +#234136 = VERTEX_POINT('',#234137); +#234137 = CARTESIAN_POINT('',(160.494102,-53.892104,1.585)); +#234138 = CIRCLE('',#234139,7.500006711464E-02); +#234139 = AXIS2_PLACEMENT_3D('',#234140,#234141,#234142); +#234140 = CARTESIAN_POINT('',(160.49410206711,-53.81710393288,1.585)); +#234141 = DIRECTION('',(0.,0.,-1.)); +#234142 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#234143 = ORIENTED_EDGE('',*,*,#234144,.T.); +#234144 = EDGE_CURVE('',#234136,#234145,#234147,.T.); +#234145 = VERTEX_POINT('',#234146); +#234146 = CARTESIAN_POINT('',(160.233106,-53.892532,1.585)); +#234147 = LINE('',#234148,#234149); +#234148 = CARTESIAN_POINT('',(160.494102,-53.892104,1.585)); +#234149 = VECTOR('',#234150,1.); +#234150 = DIRECTION('',(-0.999998655413,-1.639869670478E-03,0.)); +#234151 = ORIENTED_EDGE('',*,*,#234152,.T.); +#234152 = EDGE_CURVE('',#234145,#234153,#234155,.T.); +#234153 = VERTEX_POINT('',#234154); +#234154 = CARTESIAN_POINT('',(160.233106,-54.122628,1.585)); +#234155 = LINE('',#234156,#234157); +#234156 = CARTESIAN_POINT('',(160.233106,-53.892532,1.585)); +#234157 = VECTOR('',#234158,1.); +#234158 = DIRECTION('',(0.,-1.,0.)); +#234159 = ORIENTED_EDGE('',*,*,#234160,.T.); +#234160 = EDGE_CURVE('',#234153,#234161,#234163,.T.); +#234161 = VERTEX_POINT('',#234162); +#234162 = CARTESIAN_POINT('',(159.984924,-54.366853,1.585)); +#234163 = CIRCLE('',#234164,0.348632713765); +#234164 = AXIS2_PLACEMENT_3D('',#234165,#234166,#234167); +#234165 = CARTESIAN_POINT('',(159.89715597394,-54.02944887627,1.585)); +#234166 = DIRECTION('',(0.,0.,-1.)); +#234167 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#234168 = ORIENTED_EDGE('',*,*,#234169,.T.); +#234169 = EDGE_CURVE('',#234161,#234170,#234172,.T.); +#234170 = VERTEX_POINT('',#234171); +#234171 = CARTESIAN_POINT('',(159.664768,-54.365631,1.585)); +#234172 = LINE('',#234173,#234174); +#234173 = CARTESIAN_POINT('',(159.984924,-54.366853,1.585)); +#234174 = VECTOR('',#234175,1.); +#234175 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#234176 = ORIENTED_EDGE('',*,*,#234177,.T.); +#234177 = EDGE_CURVE('',#234170,#234178,#234180,.T.); +#234178 = VERTEX_POINT('',#234179); +#234179 = CARTESIAN_POINT('',(159.420543,-54.11745,1.585)); +#234180 = CIRCLE('',#234181,0.348628078749); +#234181 = AXIS2_PLACEMENT_3D('',#234182,#234183,#234184); +#234182 = CARTESIAN_POINT('',(159.7579430302,-54.02968464857,1.585)); +#234183 = DIRECTION('',(0.,0.,-1.)); +#234184 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#234185 = ORIENTED_EDGE('',*,*,#234186,.T.); +#234186 = EDGE_CURVE('',#234178,#234187,#234189,.T.); +#234187 = VERTEX_POINT('',#234188); +#234188 = CARTESIAN_POINT('',(159.421765,-53.892533,1.585)); +#234189 = LINE('',#234190,#234191); +#234190 = CARTESIAN_POINT('',(159.420543,-54.11745,1.585)); +#234191 = VECTOR('',#234192,1.); +#234192 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#234193 = ORIENTED_EDGE('',*,*,#234194,.T.); +#234194 = EDGE_CURVE('',#234187,#234101,#234195,.T.); +#234195 = LINE('',#234196,#234197); +#234196 = CARTESIAN_POINT('',(159.421765,-53.892533,1.585)); +#234197 = VECTOR('',#234198,1.); +#234198 = DIRECTION('',(0.407855431141,0.913046519784,0.)); +#234199 = FACE_BOUND('',#234200,.F.); +#234200 = EDGE_LOOP('',(#234201,#234211,#234219,#234227,#234235,#234244, + #234252,#234261)); +#234201 = ORIENTED_EDGE('',*,*,#234202,.T.); +#234202 = EDGE_CURVE('',#234203,#234205,#234207,.T.); +#234203 = VERTEX_POINT('',#234204); +#234204 = CARTESIAN_POINT('',(160.085769,-53.930047,1.585)); +#234205 = VERTEX_POINT('',#234206); +#234206 = CARTESIAN_POINT('',(160.066797,-53.892104,1.585)); +#234207 = LINE('',#234208,#234209); +#234208 = CARTESIAN_POINT('',(160.085769,-53.930047,1.585)); +#234209 = VECTOR('',#234210,1.); +#234210 = DIRECTION('',(-0.447223024592,0.894422476392,0.)); +#234211 = ORIENTED_EDGE('',*,*,#234212,.T.); +#234212 = EDGE_CURVE('',#234205,#234213,#234215,.T.); +#234213 = VERTEX_POINT('',#234214); +#234214 = CARTESIAN_POINT('',(159.588074,-53.892104,1.585)); +#234215 = LINE('',#234216,#234217); +#234216 = CARTESIAN_POINT('',(160.066797,-53.892104,1.585)); +#234217 = VECTOR('',#234218,1.); +#234218 = DIRECTION('',(-1.,0.,0.)); +#234219 = ORIENTED_EDGE('',*,*,#234220,.T.); +#234220 = EDGE_CURVE('',#234213,#234221,#234223,.T.); +#234221 = VERTEX_POINT('',#234222); +#234222 = CARTESIAN_POINT('',(159.569102,-53.930047,1.585)); +#234223 = LINE('',#234224,#234225); +#234224 = CARTESIAN_POINT('',(159.588074,-53.892104,1.585)); +#234225 = VECTOR('',#234226,1.); +#234226 = DIRECTION('',(-0.447223024593,-0.894422476391,0.)); +#234227 = ORIENTED_EDGE('',*,*,#234228,.T.); +#234228 = EDGE_CURVE('',#234221,#234229,#234231,.T.); +#234229 = VERTEX_POINT('',#234230); +#234230 = CARTESIAN_POINT('',(159.569102,-54.085113,1.585)); +#234231 = LINE('',#234232,#234233); +#234232 = CARTESIAN_POINT('',(159.569102,-53.930047,1.585)); +#234233 = VECTOR('',#234234,1.); +#234234 = DIRECTION('',(0.,-1.,0.)); +#234235 = ORIENTED_EDGE('',*,*,#234236,.T.); +#234236 = EDGE_CURVE('',#234229,#234237,#234239,.T.); +#234237 = VERTEX_POINT('',#234238); +#234238 = CARTESIAN_POINT('',(159.702283,-54.218294,1.585)); +#234239 = CIRCLE('',#234240,0.18686440374); +#234240 = AXIS2_PLACEMENT_3D('',#234241,#234242,#234243); +#234241 = CARTESIAN_POINT('',(159.749819,-54.037577,1.585)); +#234242 = DIRECTION('',(0.,0.,1.)); +#234243 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#234244 = ORIENTED_EDGE('',*,*,#234245,.T.); +#234245 = EDGE_CURVE('',#234237,#234246,#234248,.T.); +#234246 = VERTEX_POINT('',#234247); +#234247 = CARTESIAN_POINT('',(159.952587,-54.218294,1.585)); +#234248 = LINE('',#234249,#234250); +#234249 = CARTESIAN_POINT('',(159.702283,-54.218294,1.585)); +#234250 = VECTOR('',#234251,1.); +#234251 = DIRECTION('',(1.,0.,0.)); +#234252 = ORIENTED_EDGE('',*,*,#234253,.T.); +#234253 = EDGE_CURVE('',#234246,#234254,#234256,.T.); +#234254 = VERTEX_POINT('',#234255); +#234255 = CARTESIAN_POINT('',(160.085769,-54.085113,1.585)); +#234256 = CIRCLE('',#234257,0.186872595955); +#234257 = AXIS2_PLACEMENT_3D('',#234258,#234259,#234260); +#234258 = CARTESIAN_POINT('',(159.90504536766,-54.03757001068,1.585)); +#234259 = DIRECTION('',(0.,0.,1.)); +#234260 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#234261 = ORIENTED_EDGE('',*,*,#234262,.T.); +#234262 = EDGE_CURVE('',#234254,#234203,#234263,.T.); +#234263 = LINE('',#234264,#234265); +#234264 = CARTESIAN_POINT('',(160.085769,-54.085113,1.585)); +#234265 = VECTOR('',#234266,1.); +#234266 = DIRECTION('',(0.,1.,0.)); +#234267 = PLANE('',#234268); +#234268 = AXIS2_PLACEMENT_3D('',#234269,#234270,#234271); +#234269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234270 = DIRECTION('',(0.,0.,1.)); +#234271 = DIRECTION('',(1.,0.,-0.)); +#234272 = SHELL_BASED_SURFACE_MODEL('',(#234273)); +#234273 = OPEN_SHELL('',(#234274)); +#234274 = ADVANCED_FACE('',(#234275),#234352,.T.); +#234275 = FACE_BOUND('',#234276,.F.); +#234276 = EDGE_LOOP('',(#234277,#234288,#234296,#234304,#234313,#234321, + #234329,#234338,#234346)); +#234277 = ORIENTED_EDGE('',*,*,#234278,.T.); +#234278 = EDGE_CURVE('',#234279,#234281,#234283,.T.); +#234279 = VERTEX_POINT('',#234280); +#234280 = CARTESIAN_POINT('',(147.279545,-53.667983,1.585)); +#234281 = VERTEX_POINT('',#234282); +#234282 = CARTESIAN_POINT('',(147.404597,-53.692857,1.585)); +#234283 = CIRCLE('',#234284,6.499988811647E-02); +#234284 = AXIS2_PLACEMENT_3D('',#234285,#234286,#234287); +#234285 = CARTESIAN_POINT('',(147.33959711188,-53.6928572701,1.585)); +#234286 = DIRECTION('',(0.,0.,-1.)); +#234287 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#234288 = ORIENTED_EDGE('',*,*,#234289,.T.); +#234289 = EDGE_CURVE('',#234281,#234290,#234292,.T.); +#234290 = VERTEX_POINT('',#234291); +#234291 = CARTESIAN_POINT('',(147.404597,-53.884999,1.585)); +#234292 = LINE('',#234293,#234294); +#234293 = CARTESIAN_POINT('',(147.404597,-53.692857,1.585)); +#234294 = VECTOR('',#234295,1.); +#234295 = DIRECTION('',(0.,-1.,0.)); +#234296 = ORIENTED_EDGE('',*,*,#234297,.T.); +#234297 = EDGE_CURVE('',#234290,#234298,#234300,.T.); +#234298 = VERTEX_POINT('',#234299); +#234299 = CARTESIAN_POINT('',(148.239597,-53.884999,1.585)); +#234300 = LINE('',#234301,#234302); +#234301 = CARTESIAN_POINT('',(147.404597,-53.884999,1.585)); +#234302 = VECTOR('',#234303,1.); +#234303 = DIRECTION('',(1.,0.,0.)); +#234304 = ORIENTED_EDGE('',*,*,#234305,.T.); +#234305 = EDGE_CURVE('',#234298,#234306,#234308,.T.); +#234306 = VERTEX_POINT('',#234307); +#234307 = CARTESIAN_POINT('',(148.239597,-54.014999,1.585)); +#234308 = CIRCLE('',#234309,6.500000000092E-02); +#234309 = AXIS2_PLACEMENT_3D('',#234310,#234311,#234312); +#234310 = CARTESIAN_POINT('',(148.23959665513,-53.949999,1.585)); +#234311 = DIRECTION('',(0.,0.,-1.)); +#234312 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#234313 = ORIENTED_EDGE('',*,*,#234314,.T.); +#234314 = EDGE_CURVE('',#234306,#234315,#234317,.T.); +#234315 = VERTEX_POINT('',#234316); +#234316 = CARTESIAN_POINT('',(147.404597,-54.014999,1.585)); +#234317 = LINE('',#234318,#234319); +#234318 = CARTESIAN_POINT('',(148.239597,-54.014999,1.585)); +#234319 = VECTOR('',#234320,1.); +#234320 = DIRECTION('',(-1.,0.,0.)); +#234321 = ORIENTED_EDGE('',*,*,#234322,.T.); +#234322 = EDGE_CURVE('',#234315,#234323,#234325,.T.); +#234323 = VERTEX_POINT('',#234324); +#234324 = CARTESIAN_POINT('',(147.404597,-54.207142,1.585)); +#234325 = LINE('',#234326,#234327); +#234326 = CARTESIAN_POINT('',(147.404597,-54.014999,1.585)); +#234327 = VECTOR('',#234328,1.); +#234328 = DIRECTION('',(0.,-1.,0.)); +#234329 = ORIENTED_EDGE('',*,*,#234330,.T.); +#234330 = EDGE_CURVE('',#234323,#234331,#234333,.T.); +#234331 = VERTEX_POINT('',#234332); +#234332 = CARTESIAN_POINT('',(147.274597,-54.207142,1.585)); +#234333 = CIRCLE('',#234334,6.500000000091E-02); +#234334 = AXIS2_PLACEMENT_3D('',#234335,#234336,#234337); +#234335 = CARTESIAN_POINT('',(147.339597,-54.20714165513,1.585)); +#234336 = DIRECTION('',(-0.,0.,-1.)); +#234337 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#234338 = ORIENTED_EDGE('',*,*,#234339,.T.); +#234339 = EDGE_CURVE('',#234331,#234340,#234342,.T.); +#234340 = VERTEX_POINT('',#234341); +#234341 = CARTESIAN_POINT('',(147.274597,-53.692857,1.585)); +#234342 = LINE('',#234343,#234344); +#234343 = CARTESIAN_POINT('',(147.274597,-54.207142,1.585)); +#234344 = VECTOR('',#234345,1.); +#234345 = DIRECTION('',(0.,1.,0.)); +#234346 = ORIENTED_EDGE('',*,*,#234347,.T.); +#234347 = EDGE_CURVE('',#234340,#234279,#234348,.T.); +#234348 = LINE('',#234349,#234350); +#234349 = CARTESIAN_POINT('',(147.274597,-53.692857,1.585)); +#234350 = VECTOR('',#234351,1.); +#234351 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#234352 = PLANE('',#234353); +#234353 = AXIS2_PLACEMENT_3D('',#234354,#234355,#234356); +#234354 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234355 = DIRECTION('',(0.,0.,1.)); +#234356 = DIRECTION('',(1.,0.,-0.)); +#234357 = SHELL_BASED_SURFACE_MODEL('',(#234358)); +#234358 = OPEN_SHELL('',(#234359)); +#234359 = ADVANCED_FACE('',(#234360),#234494,.T.); +#234360 = FACE_BOUND('',#234361,.F.); +#234361 = EDGE_LOOP('',(#234362,#234372,#234380,#234389,#234397,#234405, + #234414,#234422,#234431,#234439,#234447,#234455,#234463,#234472, + #234480,#234488)); +#234362 = ORIENTED_EDGE('',*,*,#234363,.T.); +#234363 = EDGE_CURVE('',#234364,#234366,#234368,.T.); +#234364 = VERTEX_POINT('',#234365); +#234365 = CARTESIAN_POINT('',(192.231062,-53.067441,1.585)); +#234366 = VERTEX_POINT('',#234367); +#234367 = CARTESIAN_POINT('',(192.269518,-53.04686,1.585)); +#234368 = LINE('',#234369,#234370); +#234369 = CARTESIAN_POINT('',(192.231062,-53.067441,1.585)); +#234370 = VECTOR('',#234371,1.); +#234371 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#234372 = ORIENTED_EDGE('',*,*,#234373,.T.); +#234373 = EDGE_CURVE('',#234366,#234374,#234376,.T.); +#234374 = VERTEX_POINT('',#234375); +#234375 = CARTESIAN_POINT('',(192.291355,-53.04686,1.585)); +#234376 = LINE('',#234377,#234378); +#234377 = CARTESIAN_POINT('',(192.269518,-53.04686,1.585)); +#234378 = VECTOR('',#234379,1.); +#234379 = DIRECTION('',(1.,0.,0.)); +#234380 = ORIENTED_EDGE('',*,*,#234381,.T.); +#234381 = EDGE_CURVE('',#234374,#234382,#234384,.T.); +#234382 = VERTEX_POINT('',#234383); +#234383 = CARTESIAN_POINT('',(192.35915,-53.120419,1.585)); +#234384 = CIRCLE('',#234385,7.21689809423E-02); +#234385 = AXIS2_PLACEMENT_3D('',#234386,#234387,#234388); +#234386 = CARTESIAN_POINT('',(192.28699706389,-53.11889728342,1.585)); +#234387 = DIRECTION('',(0.,0.,-1.)); +#234388 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#234389 = ORIENTED_EDGE('',*,*,#234390,.T.); +#234390 = EDGE_CURVE('',#234382,#234391,#234393,.T.); +#234391 = VERTEX_POINT('',#234392); +#234392 = CARTESIAN_POINT('',(192.35915,-54.045419,1.585)); +#234393 = LINE('',#234394,#234395); +#234394 = CARTESIAN_POINT('',(192.35915,-53.120419,1.585)); +#234395 = VECTOR('',#234396,1.); +#234396 = DIRECTION('',(0.,-1.,0.)); +#234397 = ORIENTED_EDGE('',*,*,#234398,.T.); +#234398 = EDGE_CURVE('',#234391,#234399,#234401,.T.); +#234399 = VERTEX_POINT('',#234400); +#234400 = CARTESIAN_POINT('',(192.584496,-54.04686,1.585)); +#234401 = LINE('',#234402,#234403); +#234402 = CARTESIAN_POINT('',(192.35915,-54.045419,1.585)); +#234403 = VECTOR('',#234404,1.); +#234404 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#234405 = ORIENTED_EDGE('',*,*,#234406,.T.); +#234406 = EDGE_CURVE('',#234399,#234407,#234409,.T.); +#234407 = VERTEX_POINT('',#234408); +#234408 = CARTESIAN_POINT('',(192.569864,-54.195419,1.585)); +#234409 = CIRCLE('',#234410,7.500006711464E-02); +#234410 = AXIS2_PLACEMENT_3D('',#234411,#234412,#234413); +#234411 = CARTESIAN_POINT('',(192.56986406711,-54.12041893288,1.585)); +#234412 = DIRECTION('',(0.,0.,-1.)); +#234413 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#234414 = ORIENTED_EDGE('',*,*,#234415,.T.); +#234415 = EDGE_CURVE('',#234407,#234416,#234418,.T.); +#234416 = VERTEX_POINT('',#234417); +#234417 = CARTESIAN_POINT('',(191.983804,-54.193978,1.585)); +#234418 = LINE('',#234419,#234420); +#234419 = CARTESIAN_POINT('',(192.569864,-54.195419,1.585)); +#234420 = VECTOR('',#234421,1.); +#234421 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#234422 = ORIENTED_EDGE('',*,*,#234423,.T.); +#234423 = EDGE_CURVE('',#234416,#234424,#234426,.T.); +#234424 = VERTEX_POINT('',#234425); +#234425 = CARTESIAN_POINT('',(191.998436,-54.045419,1.585)); +#234426 = CIRCLE('',#234427,7.500006711464E-02); +#234427 = AXIS2_PLACEMENT_3D('',#234428,#234429,#234430); +#234428 = CARTESIAN_POINT('',(191.99843593288,-54.12041906711,1.585)); +#234429 = DIRECTION('',(0.,0.,-1.)); +#234430 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#234431 = ORIENTED_EDGE('',*,*,#234432,.T.); +#234432 = EDGE_CURVE('',#234424,#234433,#234435,.T.); +#234433 = VERTEX_POINT('',#234434); +#234434 = CARTESIAN_POINT('',(192.20915,-54.045419,1.585)); +#234435 = LINE('',#234436,#234437); +#234436 = CARTESIAN_POINT('',(191.998436,-54.045419,1.585)); +#234437 = VECTOR('',#234438,1.); +#234438 = DIRECTION('',(1.,0.,0.)); +#234439 = ORIENTED_EDGE('',*,*,#234440,.T.); +#234440 = EDGE_CURVE('',#234433,#234441,#234443,.T.); +#234441 = VERTEX_POINT('',#234442); +#234442 = CARTESIAN_POINT('',(192.20915,-53.349104,1.585)); +#234443 = LINE('',#234444,#234445); +#234444 = CARTESIAN_POINT('',(192.20915,-54.045419,1.585)); +#234445 = VECTOR('',#234446,1.); +#234446 = DIRECTION('',(0.,1.,0.)); +#234447 = ORIENTED_EDGE('',*,*,#234448,.T.); +#234448 = EDGE_CURVE('',#234441,#234449,#234451,.T.); +#234449 = VERTEX_POINT('',#234450); +#234450 = CARTESIAN_POINT('',(192.133514,-53.421631,1.585)); +#234451 = LINE('',#234452,#234453); +#234452 = CARTESIAN_POINT('',(192.20915,-53.349104,1.585)); +#234453 = VECTOR('',#234454,1.); +#234454 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#234455 = ORIENTED_EDGE('',*,*,#234456,.T.); +#234456 = EDGE_CURVE('',#234449,#234457,#234459,.T.); +#234457 = VERTEX_POINT('',#234458); +#234458 = CARTESIAN_POINT('',(192.018245,-53.47847,1.585)); +#234459 = LINE('',#234460,#234461); +#234460 = CARTESIAN_POINT('',(192.133514,-53.421631,1.585)); +#234461 = VECTOR('',#234462,1.); +#234462 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#234463 = ORIENTED_EDGE('',*,*,#234464,.T.); +#234464 = EDGE_CURVE('',#234457,#234465,#234467,.T.); +#234465 = VERTEX_POINT('',#234466); +#234466 = CARTESIAN_POINT('',(191.964895,-53.339051,1.585)); +#234467 = CIRCLE('',#234468,7.500005272362E-02); +#234468 = AXIS2_PLACEMENT_3D('',#234469,#234470,#234471); +#234469 = CARTESIAN_POINT('',(191.99843555676,-53.40613332972,1.585)); +#234470 = DIRECTION('',(0.,0.,-1.)); +#234471 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#234472 = ORIENTED_EDGE('',*,*,#234473,.T.); +#234473 = EDGE_CURVE('',#234465,#234474,#234476,.T.); +#234474 = VERTEX_POINT('',#234475); +#234475 = CARTESIAN_POINT('',(192.049247,-53.296875,1.585)); +#234476 = LINE('',#234477,#234478); +#234477 = CARTESIAN_POINT('',(191.964895,-53.339051,1.585)); +#234478 = VECTOR('',#234479,1.); +#234479 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#234480 = ORIENTED_EDGE('',*,*,#234481,.T.); +#234481 = EDGE_CURVE('',#234474,#234482,#234484,.T.); +#234482 = VERTEX_POINT('',#234483); +#234483 = CARTESIAN_POINT('',(192.130626,-53.215496,1.585)); +#234484 = LINE('',#234485,#234486); +#234485 = CARTESIAN_POINT('',(192.049247,-53.296875,1.585)); +#234486 = VECTOR('',#234487,1.); +#234487 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#234488 = ORIENTED_EDGE('',*,*,#234489,.T.); +#234489 = EDGE_CURVE('',#234482,#234364,#234490,.T.); +#234490 = LINE('',#234491,#234492); +#234491 = CARTESIAN_POINT('',(192.130626,-53.215496,1.585)); +#234492 = VECTOR('',#234493,1.); +#234493 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#234494 = PLANE('',#234495); +#234495 = AXIS2_PLACEMENT_3D('',#234496,#234497,#234498); +#234496 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234497 = DIRECTION('',(0.,0.,1.)); +#234498 = DIRECTION('',(1.,0.,-0.)); +#234499 = SHELL_BASED_SURFACE_MODEL('',(#234500)); +#234500 = OPEN_SHELL('',(#234501)); +#234501 = ADVANCED_FACE('',(#234502),#234620,.T.); +#234502 = FACE_BOUND('',#234503,.F.); +#234503 = EDGE_LOOP('',(#234504,#234515,#234523,#234531,#234540,#234548, + #234556,#234565,#234573,#234581,#234589,#234598,#234606,#234614)); +#234504 = ORIENTED_EDGE('',*,*,#234505,.T.); +#234505 = EDGE_CURVE('',#234506,#234508,#234510,.T.); +#234506 = VERTEX_POINT('',#234507); +#234507 = CARTESIAN_POINT('',(191.004387,-53.058059,1.585)); +#234508 = VERTEX_POINT('',#234509); +#234509 = CARTESIAN_POINT('',(191.121055,-53.120419,1.585)); +#234510 = CIRCLE('',#234511,7.500000000003E-02); +#234511 = AXIS2_PLACEMENT_3D('',#234512,#234513,#234514); +#234512 = CARTESIAN_POINT('',(191.046055,-53.12041906555,1.585)); +#234513 = DIRECTION('',(0.,0.,-1.)); +#234514 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#234515 = ORIENTED_EDGE('',*,*,#234516,.T.); +#234516 = EDGE_CURVE('',#234508,#234517,#234519,.T.); +#234517 = VERTEX_POINT('',#234518); +#234518 = CARTESIAN_POINT('',(191.121055,-53.510781,1.585)); +#234519 = LINE('',#234520,#234521); +#234520 = CARTESIAN_POINT('',(191.121055,-53.120419,1.585)); +#234521 = VECTOR('',#234522,1.); +#234522 = DIRECTION('',(0.,-1.,0.)); +#234523 = ORIENTED_EDGE('',*,*,#234524,.T.); +#234524 = EDGE_CURVE('',#234517,#234525,#234527,.T.); +#234525 = VERTEX_POINT('',#234526); +#234526 = CARTESIAN_POINT('',(191.575815,-53.058059,1.585)); +#234527 = LINE('',#234528,#234529); +#234528 = CARTESIAN_POINT('',(191.121055,-53.510781,1.585)); +#234529 = VECTOR('',#234530,1.); +#234530 = DIRECTION('',(0.70869299647,0.705516999621,0.)); +#234531 = ORIENTED_EDGE('',*,*,#234532,.T.); +#234532 = EDGE_CURVE('',#234525,#234533,#234535,.T.); +#234533 = VERTEX_POINT('',#234534); +#234534 = CARTESIAN_POINT('',(191.670516,-53.173452,1.585)); +#234535 = CIRCLE('',#234536,7.499996838527E-02); +#234536 = AXIS2_PLACEMENT_3D('',#234537,#234538,#234539); +#234537 = CARTESIAN_POINT('',(191.617483,-53.12041902753,1.585)); +#234538 = DIRECTION('',(0.,0.,-1.)); +#234539 = DIRECTION('',(-0.555573567524,0.831467384248,0.)); +#234540 = ORIENTED_EDGE('',*,*,#234541,.T.); +#234541 = EDGE_CURVE('',#234533,#234542,#234544,.T.); +#234542 = VERTEX_POINT('',#234543); +#234543 = CARTESIAN_POINT('',(191.28794,-53.556027,1.585)); +#234544 = LINE('',#234545,#234546); +#234545 = CARTESIAN_POINT('',(191.670516,-53.173452,1.585)); +#234546 = VECTOR('',#234547,1.); +#234547 = DIRECTION('',(-0.707107705326,-0.707105857046,0.)); +#234548 = ORIENTED_EDGE('',*,*,#234549,.T.); +#234549 = EDGE_CURVE('',#234542,#234550,#234552,.T.); +#234550 = VERTEX_POINT('',#234551); +#234551 = CARTESIAN_POINT('',(191.68511,-54.087989,1.585)); +#234552 = LINE('',#234553,#234554); +#234553 = CARTESIAN_POINT('',(191.28794,-53.556027,1.585)); +#234554 = VECTOR('',#234555,1.); +#234555 = DIRECTION('',(0.598261868875,-0.801300652845,0.)); +#234556 = ORIENTED_EDGE('',*,*,#234557,.T.); +#234557 = EDGE_CURVE('',#234550,#234558,#234560,.T.); +#234558 = VERTEX_POINT('',#234559); +#234559 = CARTESIAN_POINT('',(191.557483,-54.165419,1.585)); +#234560 = CIRCLE('',#234561,7.500042710847E-02); +#234561 = AXIS2_PLACEMENT_3D('',#234562,#234563,#234564); +#234562 = CARTESIAN_POINT('',(191.61748311876,-54.1204184465,1.585)); +#234563 = DIRECTION('',(0.,0.,-1.)); +#234564 = DIRECTION('',(0.901686614921,0.432390157695,0.)); +#234565 = ORIENTED_EDGE('',*,*,#234566,.T.); +#234566 = EDGE_CURVE('',#234558,#234567,#234569,.T.); +#234567 = VERTEX_POINT('',#234568); +#234568 = CARTESIAN_POINT('',(191.180797,-53.66317,1.585)); +#234569 = LINE('',#234570,#234571); +#234570 = CARTESIAN_POINT('',(191.557483,-54.165419,1.585)); +#234571 = VECTOR('',#234572,1.); +#234572 = DIRECTION('',(-0.599999235438,0.800000573421,0.)); +#234573 = ORIENTED_EDGE('',*,*,#234574,.T.); +#234574 = EDGE_CURVE('',#234567,#234575,#234577,.T.); +#234575 = VERTEX_POINT('',#234576); +#234576 = CARTESIAN_POINT('',(191.121055,-53.722913,1.585)); +#234577 = LINE('',#234578,#234579); +#234578 = CARTESIAN_POINT('',(191.180797,-53.66317,1.585)); +#234579 = VECTOR('',#234580,1.); +#234580 = DIRECTION('',(-0.707100863207,-0.707112699116,0.)); +#234581 = ORIENTED_EDGE('',*,*,#234582,.T.); +#234582 = EDGE_CURVE('',#234575,#234583,#234585,.T.); +#234583 = VERTEX_POINT('',#234584); +#234584 = CARTESIAN_POINT('',(191.119614,-54.135051,1.585)); +#234585 = LINE('',#234586,#234587); +#234586 = CARTESIAN_POINT('',(191.121055,-53.722913,1.585)); +#234587 = VECTOR('',#234588,1.); +#234588 = DIRECTION('',(-3.496380319442E-03,-0.999993887644,0.)); +#234589 = ORIENTED_EDGE('',*,*,#234590,.T.); +#234590 = EDGE_CURVE('',#234583,#234591,#234593,.T.); +#234591 = VERTEX_POINT('',#234592); +#234592 = CARTESIAN_POINT('',(190.971055,-54.120419,1.585)); +#234593 = CIRCLE('',#234594,7.500006711464E-02); +#234594 = AXIS2_PLACEMENT_3D('',#234595,#234596,#234597); +#234595 = CARTESIAN_POINT('',(191.04605506711,-54.12041906711,1.585)); +#234596 = DIRECTION('',(-0.,0.,-1.)); +#234597 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#234598 = ORIENTED_EDGE('',*,*,#234599,.T.); +#234599 = EDGE_CURVE('',#234591,#234600,#234602,.T.); +#234600 = VERTEX_POINT('',#234601); +#234601 = CARTESIAN_POINT('',(190.972496,-53.105787,1.585)); +#234602 = LINE('',#234603,#234604); +#234603 = CARTESIAN_POINT('',(190.971055,-54.120419,1.585)); +#234604 = VECTOR('',#234605,1.); +#234605 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#234606 = ORIENTED_EDGE('',*,*,#234607,.T.); +#234607 = EDGE_CURVE('',#234600,#234608,#234610,.T.); +#234608 = VERTEX_POINT('',#234609); +#234609 = CARTESIAN_POINT('',(190.983695,-53.078751,1.585)); +#234610 = LINE('',#234611,#234612); +#234611 = CARTESIAN_POINT('',(190.972496,-53.105787,1.585)); +#234612 = VECTOR('',#234613,1.); +#234613 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#234614 = ORIENTED_EDGE('',*,*,#234615,.T.); +#234615 = EDGE_CURVE('',#234608,#234506,#234616,.T.); +#234616 = LINE('',#234617,#234618); +#234617 = CARTESIAN_POINT('',(190.983695,-53.078751,1.585)); +#234618 = VECTOR('',#234619,1.); +#234619 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#234620 = PLANE('',#234621); +#234621 = AXIS2_PLACEMENT_3D('',#234622,#234623,#234624); +#234622 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234623 = DIRECTION('',(0.,0.,1.)); +#234624 = DIRECTION('',(1.,0.,-0.)); +#234625 = SHELL_BASED_SURFACE_MODEL('',(#234626)); +#234626 = OPEN_SHELL('',(#234627)); +#234627 = ADVANCED_FACE('',(#234628),#234869,.T.); +#234628 = FACE_BOUND('',#234629,.F.); +#234629 = EDGE_LOOP('',(#234630,#234641,#234649,#234657,#234665,#234673, + #234682,#234690,#234699,#234707,#234715,#234723,#234731,#234739, + #234747,#234756,#234764,#234772,#234780,#234788,#234797,#234805, + #234813,#234821,#234830,#234838,#234846,#234854,#234863)); +#234630 = ORIENTED_EDGE('',*,*,#234631,.T.); +#234631 = EDGE_CURVE('',#234632,#234634,#234636,.T.); +#234632 = VERTEX_POINT('',#234633); +#234633 = CARTESIAN_POINT('',(132.548882,-53.478571,1.585)); +#234634 = VERTEX_POINT('',#234635); +#234635 = CARTESIAN_POINT('',(132.613882,-53.413571,1.585)); +#234636 = CIRCLE('',#234637,6.500103935393E-02); +#234637 = AXIS2_PLACEMENT_3D('',#234638,#234639,#234640); +#234638 = CARTESIAN_POINT('',(132.61388303934,-53.47857203934,1.585)); +#234639 = DIRECTION('',(0.,0.,-1.)); +#234640 = DIRECTION('',(-0.999999999872,1.598967682012E-05,0.)); +#234641 = ORIENTED_EDGE('',*,*,#234642,.T.); +#234642 = EDGE_CURVE('',#234634,#234643,#234645,.T.); +#234643 = VERTEX_POINT('',#234644); +#234644 = CARTESIAN_POINT('',(132.913882,-53.413571,1.585)); +#234645 = LINE('',#234646,#234647); +#234646 = CARTESIAN_POINT('',(132.613882,-53.413571,1.585)); +#234647 = VECTOR('',#234648,1.); +#234648 = DIRECTION('',(1.,0.,0.)); +#234649 = ORIENTED_EDGE('',*,*,#234650,.T.); +#234650 = EDGE_CURVE('',#234643,#234651,#234653,.T.); +#234651 = VERTEX_POINT('',#234652); +#234652 = CARTESIAN_POINT('',(132.938756,-53.418519,1.585)); +#234653 = LINE('',#234654,#234655); +#234654 = CARTESIAN_POINT('',(132.913882,-53.413571,1.585)); +#234655 = VECTOR('',#234656,1.); +#234656 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#234657 = ORIENTED_EDGE('',*,*,#234658,.T.); +#234658 = EDGE_CURVE('',#234651,#234659,#234661,.T.); +#234659 = VERTEX_POINT('',#234660); +#234660 = CARTESIAN_POINT('',(132.959843,-53.432609,1.585)); +#234661 = LINE('',#234662,#234663); +#234662 = CARTESIAN_POINT('',(132.938756,-53.418519,1.585)); +#234663 = VECTOR('',#234664,1.); +#234664 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#234665 = ORIENTED_EDGE('',*,*,#234666,.T.); +#234666 = EDGE_CURVE('',#234659,#234667,#234669,.T.); +#234667 = VERTEX_POINT('',#234668); +#234668 = CARTESIAN_POINT('',(133.011003,-53.48789,1.585)); +#234669 = LINE('',#234670,#234671); +#234670 = CARTESIAN_POINT('',(132.959843,-53.432609,1.585)); +#234671 = VECTOR('',#234672,1.); +#234672 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#234673 = ORIENTED_EDGE('',*,*,#234674,.T.); +#234674 = EDGE_CURVE('',#234667,#234675,#234677,.T.); +#234675 = VERTEX_POINT('',#234676); +#234676 = CARTESIAN_POINT('',(133.010999,-53.897828,1.585)); +#234677 = CIRCLE('',#234678,0.409312568567); +#234678 = AXIS2_PLACEMENT_3D('',#234679,#234680,#234681); +#234679 = CARTESIAN_POINT('',(132.65670664807,-53.69285554294,1.585)); +#234680 = DIRECTION('',(0.,0.,-1.)); +#234681 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#234682 = ORIENTED_EDGE('',*,*,#234683,.T.); +#234683 = EDGE_CURVE('',#234675,#234684,#234686,.T.); +#234684 = VERTEX_POINT('',#234685); +#234685 = CARTESIAN_POINT('',(132.908322,-54.001751,1.585)); +#234686 = LINE('',#234687,#234688); +#234687 = CARTESIAN_POINT('',(133.010999,-53.897828,1.585)); +#234688 = VECTOR('',#234689,1.); +#234689 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#234690 = ORIENTED_EDGE('',*,*,#234691,.T.); +#234691 = EDGE_CURVE('',#234684,#234692,#234694,.T.); +#234692 = VERTEX_POINT('',#234693); +#234693 = CARTESIAN_POINT('',(132.469546,-54.098773,1.585)); +#234694 = CIRCLE('',#234695,0.675422176573); +#234695 = AXIS2_PLACEMENT_3D('',#234696,#234697,#234698); +#234696 = CARTESIAN_POINT('',(132.55141275007,-53.42833064465,1.585)); +#234697 = DIRECTION('',(0.,0.,-1.)); +#234698 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#234699 = ORIENTED_EDGE('',*,*,#234700,.T.); +#234700 = EDGE_CURVE('',#234692,#234701,#234703,.T.); +#234701 = VERTEX_POINT('',#234702); +#234702 = CARTESIAN_POINT('',(132.284813,-54.050995,1.585)); +#234703 = LINE('',#234704,#234705); +#234704 = CARTESIAN_POINT('',(132.469546,-54.098773,1.585)); +#234705 = VECTOR('',#234706,1.); +#234706 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#234707 = ORIENTED_EDGE('',*,*,#234708,.T.); +#234708 = EDGE_CURVE('',#234701,#234709,#234711,.T.); +#234709 = VERTEX_POINT('',#234710); +#234710 = CARTESIAN_POINT('',(132.182206,-53.995962,1.585)); +#234711 = LINE('',#234712,#234713); +#234712 = CARTESIAN_POINT('',(132.284813,-54.050995,1.585)); +#234713 = VECTOR('',#234714,1.); +#234714 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#234715 = ORIENTED_EDGE('',*,*,#234716,.T.); +#234716 = EDGE_CURVE('',#234709,#234717,#234719,.T.); +#234717 = VERTEX_POINT('',#234718); +#234718 = CARTESIAN_POINT('',(132.088191,-53.897824,1.585)); +#234719 = LINE('',#234720,#234721); +#234720 = CARTESIAN_POINT('',(132.182206,-53.995962,1.585)); +#234721 = VECTOR('',#234722,1.); +#234722 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#234723 = ORIENTED_EDGE('',*,*,#234724,.T.); +#234724 = EDGE_CURVE('',#234717,#234725,#234727,.T.); +#234725 = VERTEX_POINT('',#234726); +#234726 = CARTESIAN_POINT('',(132.03663,-53.745936,1.585)); +#234727 = LINE('',#234728,#234729); +#234728 = CARTESIAN_POINT('',(132.088191,-53.897824,1.585)); +#234729 = VECTOR('',#234730,1.); +#234730 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#234731 = ORIENTED_EDGE('',*,*,#234732,.T.); +#234732 = EDGE_CURVE('',#234725,#234733,#234735,.T.); +#234733 = VERTEX_POINT('',#234734); +#234734 = CARTESIAN_POINT('',(132.037512,-53.592486,1.585)); +#234735 = LINE('',#234736,#234737); +#234736 = CARTESIAN_POINT('',(132.03663,-53.745936,1.585)); +#234737 = VECTOR('',#234738,1.); +#234738 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#234739 = ORIENTED_EDGE('',*,*,#234740,.T.); +#234740 = EDGE_CURVE('',#234733,#234741,#234743,.T.); +#234741 = VERTEX_POINT('',#234742); +#234742 = CARTESIAN_POINT('',(132.084316,-53.492359,1.585)); +#234743 = LINE('',#234744,#234745); +#234744 = CARTESIAN_POINT('',(132.037512,-53.592486,1.585)); +#234745 = VECTOR('',#234746,1.); +#234746 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#234747 = ORIENTED_EDGE('',*,*,#234748,.T.); +#234748 = EDGE_CURVE('',#234741,#234749,#234751,.T.); +#234749 = VERTEX_POINT('',#234750); +#234750 = CARTESIAN_POINT('',(132.200592,-53.550497,1.585)); +#234751 = CIRCLE('',#234752,6.500026004258E-02); +#234752 = AXIS2_PLACEMENT_3D('',#234753,#234754,#234755); +#234753 = CARTESIAN_POINT('',(132.14245365279,-53.5214286944,1.585)); +#234754 = DIRECTION('',(0.,0.,-1.)); +#234755 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#234756 = ORIENTED_EDGE('',*,*,#234757,.T.); +#234757 = EDGE_CURVE('',#234749,#234758,#234760,.T.); +#234758 = VERTEX_POINT('',#234759); +#234759 = CARTESIAN_POINT('',(132.164597,-53.622487,1.585)); +#234760 = LINE('',#234761,#234762); +#234761 = CARTESIAN_POINT('',(132.200592,-53.550497,1.585)); +#234762 = VECTOR('',#234763,1.); +#234763 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#234764 = ORIENTED_EDGE('',*,*,#234765,.T.); +#234765 = EDGE_CURVE('',#234758,#234766,#234768,.T.); +#234766 = VERTEX_POINT('',#234767); +#234767 = CARTESIAN_POINT('',(132.164597,-53.725167,1.585)); +#234768 = LINE('',#234769,#234770); +#234769 = CARTESIAN_POINT('',(132.164597,-53.622487,1.585)); +#234770 = VECTOR('',#234771,1.); +#234771 = DIRECTION('',(0.,-1.,0.)); +#234772 = ORIENTED_EDGE('',*,*,#234773,.T.); +#234773 = EDGE_CURVE('',#234766,#234774,#234776,.T.); +#234774 = VERTEX_POINT('',#234775); +#234775 = CARTESIAN_POINT('',(132.199265,-53.829172,1.585)); +#234776 = LINE('',#234777,#234778); +#234777 = CARTESIAN_POINT('',(132.164597,-53.725167,1.585)); +#234778 = VECTOR('',#234779,1.); +#234779 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#234780 = ORIENTED_EDGE('',*,*,#234781,.T.); +#234781 = EDGE_CURVE('',#234774,#234782,#234784,.T.); +#234782 = VERTEX_POINT('',#234783); +#234783 = CARTESIAN_POINT('',(132.266669,-53.896578,1.585)); +#234784 = LINE('',#234785,#234786); +#234785 = CARTESIAN_POINT('',(132.199265,-53.829172,1.585)); +#234786 = VECTOR('',#234787,1.); +#234787 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#234788 = ORIENTED_EDGE('',*,*,#234789,.T.); +#234789 = EDGE_CURVE('',#234782,#234790,#234792,.T.); +#234790 = VERTEX_POINT('',#234791); +#234791 = CARTESIAN_POINT('',(132.605881,-53.970714,1.585)); +#234792 = CIRCLE('',#234793,0.553317785494); +#234793 = AXIS2_PLACEMENT_3D('',#234794,#234795,#234796); +#234794 = CARTESIAN_POINT('',(132.5484500839,-53.42038476979,1.585)); +#234795 = DIRECTION('',(0.,0.,1.)); +#234796 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#234797 = ORIENTED_EDGE('',*,*,#234798,.T.); +#234798 = EDGE_CURVE('',#234790,#234799,#234801,.T.); +#234799 = VERTEX_POINT('',#234800); +#234800 = CARTESIAN_POINT('',(132.762622,-53.931528,1.585)); +#234801 = LINE('',#234802,#234803); +#234802 = CARTESIAN_POINT('',(132.605881,-53.970714,1.585)); +#234803 = VECTOR('',#234804,1.); +#234804 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#234805 = ORIENTED_EDGE('',*,*,#234806,.T.); +#234806 = EDGE_CURVE('',#234799,#234807,#234809,.T.); +#234807 = VERTEX_POINT('',#234808); +#234808 = CARTESIAN_POINT('',(132.832522,-53.896579,1.585)); +#234809 = LINE('',#234810,#234811); +#234810 = CARTESIAN_POINT('',(132.762622,-53.931528,1.585)); +#234811 = VECTOR('',#234812,1.); +#234812 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#234813 = ORIENTED_EDGE('',*,*,#234814,.T.); +#234814 = EDGE_CURVE('',#234807,#234815,#234817,.T.); +#234815 = VERTEX_POINT('',#234816); +#234816 = CARTESIAN_POINT('',(132.899928,-53.829172,1.585)); +#234817 = LINE('',#234818,#234819); +#234818 = CARTESIAN_POINT('',(132.832522,-53.896579,1.585)); +#234819 = VECTOR('',#234820,1.); +#234820 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#234821 = ORIENTED_EDGE('',*,*,#234822,.T.); +#234822 = EDGE_CURVE('',#234815,#234823,#234825,.T.); +#234823 = VERTEX_POINT('',#234824); +#234824 = CARTESIAN_POINT('',(132.899928,-53.55654,1.585)); +#234825 = CIRCLE('',#234826,0.272194686174); +#234826 = AXIS2_PLACEMENT_3D('',#234827,#234828,#234829); +#234827 = CARTESIAN_POINT('',(132.66432686391,-53.692856,1.585)); +#234828 = DIRECTION('',(0.,-0.,1.)); +#234829 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#234830 = ORIENTED_EDGE('',*,*,#234831,.T.); +#234831 = EDGE_CURVE('',#234823,#234832,#234834,.T.); +#234832 = VERTEX_POINT('',#234833); +#234833 = CARTESIAN_POINT('',(132.886959,-53.543571,1.585)); +#234834 = LINE('',#234835,#234836); +#234835 = CARTESIAN_POINT('',(132.899928,-53.55654,1.585)); +#234836 = VECTOR('',#234837,1.); +#234837 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#234838 = ORIENTED_EDGE('',*,*,#234839,.T.); +#234839 = EDGE_CURVE('',#234832,#234840,#234842,.T.); +#234840 = VERTEX_POINT('',#234841); +#234841 = CARTESIAN_POINT('',(132.678882,-53.543571,1.585)); +#234842 = LINE('',#234843,#234844); +#234843 = CARTESIAN_POINT('',(132.886959,-53.543571,1.585)); +#234844 = VECTOR('',#234845,1.); +#234845 = DIRECTION('',(-1.,0.,0.)); +#234846 = ORIENTED_EDGE('',*,*,#234847,.T.); +#234847 = EDGE_CURVE('',#234840,#234848,#234850,.T.); +#234848 = VERTEX_POINT('',#234849); +#234849 = CARTESIAN_POINT('',(132.678882,-53.65,1.585)); +#234850 = LINE('',#234851,#234852); +#234851 = CARTESIAN_POINT('',(132.678882,-53.543571,1.585)); +#234852 = VECTOR('',#234853,1.); +#234853 = DIRECTION('',(0.,-1.,0.)); +#234854 = ORIENTED_EDGE('',*,*,#234855,.T.); +#234855 = EDGE_CURVE('',#234848,#234856,#234858,.T.); +#234856 = VERTEX_POINT('',#234857); +#234857 = CARTESIAN_POINT('',(132.548882,-53.65,1.585)); +#234858 = CIRCLE('',#234859,6.500000000091E-02); +#234859 = AXIS2_PLACEMENT_3D('',#234860,#234861,#234862); +#234860 = CARTESIAN_POINT('',(132.613882,-53.64999965513,1.585)); +#234861 = DIRECTION('',(-0.,0.,-1.)); +#234862 = DIRECTION('',(0.999999999986,-5.305658134983E-06,-0.)); +#234863 = ORIENTED_EDGE('',*,*,#234864,.T.); +#234864 = EDGE_CURVE('',#234856,#234632,#234865,.T.); +#234865 = LINE('',#234866,#234867); +#234866 = CARTESIAN_POINT('',(132.548882,-53.65,1.585)); +#234867 = VECTOR('',#234868,1.); +#234868 = DIRECTION('',(0.,1.,0.)); +#234869 = PLANE('',#234870); +#234870 = AXIS2_PLACEMENT_3D('',#234871,#234872,#234873); +#234871 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234872 = DIRECTION('',(0.,0.,1.)); +#234873 = DIRECTION('',(1.,0.,-0.)); +#234874 = SHELL_BASED_SURFACE_MODEL('',(#234875)); +#234875 = OPEN_SHELL('',(#234876)); +#234876 = ADVANCED_FACE('',(#234877,#234954),#235031,.T.); +#234877 = FACE_BOUND('',#234878,.F.); +#234878 = EDGE_LOOP('',(#234879,#234890,#234898,#234907,#234915,#234923, + #234932,#234940,#234948)); +#234879 = ORIENTED_EDGE('',*,*,#234880,.T.); +#234880 = EDGE_CURVE('',#234881,#234883,#234885,.T.); +#234881 = VERTEX_POINT('',#234882); +#234882 = CARTESIAN_POINT('',(177.115199,-53.386172,1.585)); +#234883 = VERTEX_POINT('',#234884); +#234884 = CARTESIAN_POINT('',(177.678513,-53.391538,1.585)); +#234885 = CIRCLE('',#234886,0.504047013411); +#234886 = AXIS2_PLACEMENT_3D('',#234887,#234888,#234889); +#234887 = CARTESIAN_POINT('',(177.39287439108,-53.80683786374,1.585)); +#234888 = DIRECTION('',(0.,0.,-1.)); +#234889 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#234890 = ORIENTED_EDGE('',*,*,#234891,.T.); +#234891 = EDGE_CURVE('',#234883,#234892,#234894,.T.); +#234892 = VERTEX_POINT('',#234893); +#234893 = CARTESIAN_POINT('',(177.741967,-53.457068,1.585)); +#234894 = LINE('',#234895,#234896); +#234895 = CARTESIAN_POINT('',(177.678513,-53.391538,1.585)); +#234896 = VECTOR('',#234897,1.); +#234897 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#234898 = ORIENTED_EDGE('',*,*,#234899,.T.); +#234899 = EDGE_CURVE('',#234892,#234900,#234902,.T.); +#234900 = VERTEX_POINT('',#234901); +#234901 = CARTESIAN_POINT('',(177.671067,-53.940979,1.585)); +#234902 = CIRCLE('',#234903,0.3442476568); +#234903 = AXIS2_PLACEMENT_3D('',#234904,#234905,#234906); +#234904 = CARTESIAN_POINT('',(177.46678063106,-53.66389863497,1.585)); +#234905 = DIRECTION('',(0.,0.,-1.)); +#234906 = DIRECTION('',(0.799384871611,0.600819296494,0.)); +#234907 = ORIENTED_EDGE('',*,*,#234908,.T.); +#234908 = EDGE_CURVE('',#234900,#234909,#234911,.T.); +#234909 = VERTEX_POINT('',#234910); +#234910 = CARTESIAN_POINT('',(177.550624,-53.999039,1.585)); +#234911 = LINE('',#234912,#234913); +#234912 = CARTESIAN_POINT('',(177.671067,-53.940979,1.585)); +#234913 = VECTOR('',#234914,1.); +#234914 = DIRECTION('',(-0.900800079444,-0.434234057708,0.)); +#234915 = ORIENTED_EDGE('',*,*,#234916,.T.); +#234916 = EDGE_CURVE('',#234909,#234917,#234919,.T.); +#234917 = VERTEX_POINT('',#234918); +#234918 = CARTESIAN_POINT('',(177.230468,-53.997817,1.585)); +#234919 = LINE('',#234920,#234921); +#234920 = CARTESIAN_POINT('',(177.550624,-53.999039,1.585)); +#234921 = VECTOR('',#234922,1.); +#234922 = DIRECTION('',(-0.999992715758,3.816861463354E-03,0.)); +#234923 = ORIENTED_EDGE('',*,*,#234924,.T.); +#234924 = EDGE_CURVE('',#234917,#234925,#234927,.T.); +#234925 = VERTEX_POINT('',#234926); +#234926 = CARTESIAN_POINT('',(176.986243,-53.749636,1.585)); +#234927 = CIRCLE('',#234928,0.348628078749); +#234928 = AXIS2_PLACEMENT_3D('',#234929,#234930,#234931); +#234929 = CARTESIAN_POINT('',(177.3236430302,-53.66187064857,1.585)); +#234930 = DIRECTION('',(0.,0.,-1.)); +#234931 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#234932 = ORIENTED_EDGE('',*,*,#234933,.T.); +#234933 = EDGE_CURVE('',#234925,#234934,#234936,.T.); +#234934 = VERTEX_POINT('',#234935); +#234935 = CARTESIAN_POINT('',(176.987465,-53.572338,1.585)); +#234936 = LINE('',#234937,#234938); +#234937 = CARTESIAN_POINT('',(176.986243,-53.749636,1.585)); +#234938 = VECTOR('',#234939,1.); +#234939 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#234940 = ORIENTED_EDGE('',*,*,#234941,.T.); +#234941 = EDGE_CURVE('',#234934,#234942,#234944,.T.); +#234942 = VERTEX_POINT('',#234943); +#234943 = CARTESIAN_POINT('',(177.049669,-53.449625,1.585)); +#234944 = LINE('',#234945,#234946); +#234945 = CARTESIAN_POINT('',(176.987465,-53.572338,1.585)); +#234946 = VECTOR('',#234947,1.); +#234947 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#234948 = ORIENTED_EDGE('',*,*,#234949,.T.); +#234949 = EDGE_CURVE('',#234942,#234881,#234950,.T.); +#234950 = LINE('',#234951,#234952); +#234951 = CARTESIAN_POINT('',(177.049669,-53.449625,1.585)); +#234952 = VECTOR('',#234953,1.); +#234953 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#234954 = FACE_BOUND('',#234955,.F.); +#234955 = EDGE_LOOP('',(#234956,#234967,#234975,#234984,#234992,#235000, + #235009,#235017,#235025)); +#234956 = ORIENTED_EDGE('',*,*,#234957,.T.); +#234957 = EDGE_CURVE('',#234958,#234960,#234962,.T.); +#234958 = VERTEX_POINT('',#234959); +#234959 = CARTESIAN_POINT('',(177.586803,-53.510929,1.585)); +#234960 = VERTEX_POINT('',#234961); +#234961 = CARTESIAN_POINT('',(177.199467,-53.510929,1.585)); +#234962 = CIRCLE('',#234963,0.358503491901); +#234963 = AXIS2_PLACEMENT_3D('',#234964,#234965,#234966); +#234964 = CARTESIAN_POINT('',(177.393135,-53.81262,1.585)); +#234965 = DIRECTION('',(0.,0.,1.)); +#234966 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#234967 = ORIENTED_EDGE('',*,*,#234968,.T.); +#234968 = EDGE_CURVE('',#234960,#234969,#234971,.T.); +#234969 = VERTEX_POINT('',#234970); +#234970 = CARTESIAN_POINT('',(177.16906,-53.541336,1.585)); +#234971 = LINE('',#234972,#234973); +#234972 = CARTESIAN_POINT('',(177.199467,-53.510929,1.585)); +#234973 = VECTOR('',#234974,1.); +#234974 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#234975 = ORIENTED_EDGE('',*,*,#234976,.T.); +#234976 = EDGE_CURVE('',#234969,#234977,#234979,.T.); +#234977 = VERTEX_POINT('',#234978); +#234978 = CARTESIAN_POINT('',(177.199467,-53.816222,1.585)); +#234979 = CIRCLE('',#234980,0.198386215365); +#234980 = AXIS2_PLACEMENT_3D('',#234981,#234982,#234983); +#234981 = CARTESIAN_POINT('',(177.3256521753,-53.66313904216,1.585)); +#234982 = DIRECTION('',(0.,0.,1.)); +#234983 = DIRECTION('',(-0.789329919001,0.61396928178,0.)); +#234984 = ORIENTED_EDGE('',*,*,#234985,.T.); +#234985 = EDGE_CURVE('',#234977,#234986,#234988,.T.); +#234986 = VERTEX_POINT('',#234987); +#234987 = CARTESIAN_POINT('',(177.267983,-53.85048,1.585)); +#234988 = LINE('',#234989,#234990); +#234989 = CARTESIAN_POINT('',(177.199467,-53.816222,1.585)); +#234990 = VECTOR('',#234991,1.); +#234991 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#234992 = ORIENTED_EDGE('',*,*,#234993,.T.); +#234993 = EDGE_CURVE('',#234986,#234994,#234996,.T.); +#234994 = VERTEX_POINT('',#234995); +#234995 = CARTESIAN_POINT('',(177.518287,-53.85048,1.585)); +#234996 = LINE('',#234997,#234998); +#234997 = CARTESIAN_POINT('',(177.267983,-53.85048,1.585)); +#234998 = VECTOR('',#234999,1.); +#234999 = DIRECTION('',(1.,0.,0.)); +#235000 = ORIENTED_EDGE('',*,*,#235001,.T.); +#235001 = EDGE_CURVE('',#234994,#235002,#235004,.T.); +#235002 = VERTEX_POINT('',#235003); +#235003 = CARTESIAN_POINT('',(177.651469,-53.717299,1.585)); +#235004 = CIRCLE('',#235005,0.186872595955); +#235005 = AXIS2_PLACEMENT_3D('',#235006,#235007,#235008); +#235006 = CARTESIAN_POINT('',(177.47074536766,-53.66975601068,1.585)); +#235007 = DIRECTION('',(0.,0.,1.)); +#235008 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#235009 = ORIENTED_EDGE('',*,*,#235010,.T.); +#235010 = EDGE_CURVE('',#235002,#235011,#235013,.T.); +#235011 = VERTEX_POINT('',#235012); +#235012 = CARTESIAN_POINT('',(177.651469,-53.609852,1.585)); +#235013 = LINE('',#235014,#235015); +#235014 = CARTESIAN_POINT('',(177.651469,-53.717299,1.585)); +#235015 = VECTOR('',#235016,1.); +#235016 = DIRECTION('',(0.,1.,0.)); +#235017 = ORIENTED_EDGE('',*,*,#235018,.T.); +#235018 = EDGE_CURVE('',#235011,#235019,#235021,.T.); +#235019 = VERTEX_POINT('',#235020); +#235020 = CARTESIAN_POINT('',(177.617211,-53.541336,1.585)); +#235021 = LINE('',#235022,#235023); +#235022 = CARTESIAN_POINT('',(177.651469,-53.609852,1.585)); +#235023 = VECTOR('',#235024,1.); +#235024 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#235025 = ORIENTED_EDGE('',*,*,#235026,.T.); +#235026 = EDGE_CURVE('',#235019,#234958,#235027,.T.); +#235027 = LINE('',#235028,#235029); +#235028 = CARTESIAN_POINT('',(177.617211,-53.541336,1.585)); +#235029 = VECTOR('',#235030,1.); +#235030 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#235031 = PLANE('',#235032); +#235032 = AXIS2_PLACEMENT_3D('',#235033,#235034,#235035); +#235033 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235034 = DIRECTION('',(0.,0.,1.)); +#235035 = DIRECTION('',(1.,0.,-0.)); +#235036 = SHELL_BASED_SURFACE_MODEL('',(#235037)); +#235037 = OPEN_SHELL('',(#235038)); +#235038 = ADVANCED_FACE('',(#235039),#235108,.T.); +#235039 = FACE_BOUND('',#235040,.F.); +#235040 = EDGE_LOOP('',(#235041,#235052,#235060,#235069,#235077,#235086, + #235094,#235102)); +#235041 = ORIENTED_EDGE('',*,*,#235042,.T.); +#235042 = EDGE_CURVE('',#235043,#235045,#235047,.T.); +#235043 = VERTEX_POINT('',#235044); +#235044 = CARTESIAN_POINT('',(140.549545,-53.346553,1.585)); +#235045 = VERTEX_POINT('',#235046); +#235046 = CARTESIAN_POINT('',(140.674597,-53.371427,1.585)); +#235047 = CIRCLE('',#235048,6.499988811649E-02); +#235048 = AXIS2_PLACEMENT_3D('',#235049,#235050,#235051); +#235049 = CARTESIAN_POINT('',(140.60959711188,-53.3714272701,1.585)); +#235050 = DIRECTION('',(0.,0.,-1.)); +#235051 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#235052 = ORIENTED_EDGE('',*,*,#235053,.T.); +#235053 = EDGE_CURVE('',#235045,#235054,#235056,.T.); +#235054 = VERTEX_POINT('',#235055); +#235055 = CARTESIAN_POINT('',(140.674597,-53.799999,1.585)); +#235056 = LINE('',#235057,#235058); +#235057 = CARTESIAN_POINT('',(140.674597,-53.371427,1.585)); +#235058 = VECTOR('',#235059,1.); +#235059 = DIRECTION('',(0.,-1.,0.)); +#235060 = ORIENTED_EDGE('',*,*,#235061,.T.); +#235061 = EDGE_CURVE('',#235054,#235062,#235064,.T.); +#235062 = VERTEX_POINT('',#235063); +#235063 = CARTESIAN_POINT('',(140.609597,-53.864999,1.585)); +#235064 = CIRCLE('',#235065,6.500103935393E-02); +#235065 = AXIS2_PLACEMENT_3D('',#235066,#235067,#235068); +#235066 = CARTESIAN_POINT('',(140.60959596065,-53.79999796065,1.585)); +#235067 = DIRECTION('',(0.,0.,-1.)); +#235068 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#235069 = ORIENTED_EDGE('',*,*,#235070,.T.); +#235070 = EDGE_CURVE('',#235062,#235071,#235073,.T.); +#235071 = VERTEX_POINT('',#235072); +#235072 = CARTESIAN_POINT('',(139.709597,-53.864999,1.585)); +#235073 = LINE('',#235074,#235075); +#235074 = CARTESIAN_POINT('',(140.609597,-53.864999,1.585)); +#235075 = VECTOR('',#235076,1.); +#235076 = DIRECTION('',(-1.,0.,0.)); +#235077 = ORIENTED_EDGE('',*,*,#235078,.T.); +#235078 = EDGE_CURVE('',#235071,#235079,#235081,.T.); +#235079 = VERTEX_POINT('',#235080); +#235080 = CARTESIAN_POINT('',(139.709597,-53.734999,1.585)); +#235081 = CIRCLE('',#235082,6.500000000091E-02); +#235082 = AXIS2_PLACEMENT_3D('',#235083,#235084,#235085); +#235083 = CARTESIAN_POINT('',(139.70959734486,-53.799999,1.585)); +#235084 = DIRECTION('',(0.,0.,-1.)); +#235085 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#235086 = ORIENTED_EDGE('',*,*,#235087,.T.); +#235087 = EDGE_CURVE('',#235079,#235088,#235090,.T.); +#235088 = VERTEX_POINT('',#235089); +#235089 = CARTESIAN_POINT('',(140.544597,-53.734999,1.585)); +#235090 = LINE('',#235091,#235092); +#235091 = CARTESIAN_POINT('',(139.709597,-53.734999,1.585)); +#235092 = VECTOR('',#235093,1.); +#235093 = DIRECTION('',(1.,0.,0.)); +#235094 = ORIENTED_EDGE('',*,*,#235095,.T.); +#235095 = EDGE_CURVE('',#235088,#235096,#235098,.T.); +#235096 = VERTEX_POINT('',#235097); +#235097 = CARTESIAN_POINT('',(140.544597,-53.371427,1.585)); +#235098 = LINE('',#235099,#235100); +#235099 = CARTESIAN_POINT('',(140.544597,-53.734999,1.585)); +#235100 = VECTOR('',#235101,1.); +#235101 = DIRECTION('',(0.,1.,0.)); +#235102 = ORIENTED_EDGE('',*,*,#235103,.T.); +#235103 = EDGE_CURVE('',#235096,#235043,#235104,.T.); +#235104 = LINE('',#235105,#235106); +#235105 = CARTESIAN_POINT('',(140.544597,-53.371427,1.585)); +#235106 = VECTOR('',#235107,1.); +#235107 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#235108 = PLANE('',#235109); +#235109 = AXIS2_PLACEMENT_3D('',#235110,#235111,#235112); +#235110 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235111 = DIRECTION('',(0.,0.,1.)); +#235112 = DIRECTION('',(1.,0.,-0.)); +#235113 = SHELL_BASED_SURFACE_MODEL('',(#235114)); +#235114 = OPEN_SHELL('',(#235115)); +#235115 = ADVANCED_FACE('',(#235116),#235193,.T.); +#235116 = FACE_BOUND('',#235117,.F.); +#235117 = EDGE_LOOP('',(#235118,#235129,#235137,#235146,#235154,#235163, + #235171,#235179,#235187)); +#235118 = ORIENTED_EDGE('',*,*,#235119,.T.); +#235119 = EDGE_CURVE('',#235120,#235122,#235124,.T.); +#235120 = VERTEX_POINT('',#235121); +#235121 = CARTESIAN_POINT('',(149.814761,-53.204606,1.585)); +#235122 = VERTEX_POINT('',#235123); +#235123 = CARTESIAN_POINT('',(149.900152,-53.138335,1.585)); +#235124 = CIRCLE('',#235125,6.499990070434E-02); +#235125 = AXIS2_PLACEMENT_3D('',#235126,#235127,#235128); +#235126 = CARTESIAN_POINT('',(149.87959745813,-53.19999939734,1.585)); +#235127 = DIRECTION('',(0.,0.,-1.)); +#235128 = DIRECTION('',(-0.997485495103,-7.0870918291E-02,-0.)); +#235129 = ORIENTED_EDGE('',*,*,#235130,.T.); +#235130 = EDGE_CURVE('',#235122,#235131,#235133,.T.); +#235131 = VERTEX_POINT('',#235132); +#235132 = CARTESIAN_POINT('',(150.800152,-53.438334,1.585)); +#235133 = LINE('',#235134,#235135); +#235134 = CARTESIAN_POINT('',(149.900152,-53.138335,1.585)); +#235135 = VECTOR('',#235136,1.); +#235136 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#235137 = ORIENTED_EDGE('',*,*,#235138,.T.); +#235138 = EDGE_CURVE('',#235131,#235139,#235141,.T.); +#235139 = VERTEX_POINT('',#235140); +#235140 = CARTESIAN_POINT('',(150.800152,-53.561664,1.585)); +#235141 = CIRCLE('',#235142,6.500111611216E-02); +#235142 = AXIS2_PLACEMENT_3D('',#235143,#235144,#235145); +#235143 = CARTESIAN_POINT('',(150.77959542268,-53.499999,1.585)); +#235144 = DIRECTION('',(0.,0.,-1.)); +#235145 = DIRECTION('',(0.316249605277,0.948676018018,0.)); +#235146 = ORIENTED_EDGE('',*,*,#235147,.T.); +#235147 = EDGE_CURVE('',#235139,#235148,#235150,.T.); +#235148 = VERTEX_POINT('',#235149); +#235149 = CARTESIAN_POINT('',(149.900152,-53.861663,1.585)); +#235150 = LINE('',#235151,#235152); +#235151 = CARTESIAN_POINT('',(150.800152,-53.561664,1.585)); +#235152 = VECTOR('',#235153,1.); +#235153 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#235154 = ORIENTED_EDGE('',*,*,#235155,.T.); +#235155 = EDGE_CURVE('',#235148,#235156,#235158,.T.); +#235156 = VERTEX_POINT('',#235157); +#235157 = CARTESIAN_POINT('',(149.859042,-53.738335,1.585)); +#235158 = CIRCLE('',#235159,6.499966862238E-02); +#235159 = AXIS2_PLACEMENT_3D('',#235160,#235161,#235162); +#235160 = CARTESIAN_POINT('',(149.87959712923,-53.79999895692,1.585)); +#235161 = DIRECTION('',(0.,0.,-1.)); +#235162 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#235163 = ORIENTED_EDGE('',*,*,#235164,.T.); +#235164 = EDGE_CURVE('',#235156,#235165,#235167,.T.); +#235165 = VERTEX_POINT('',#235166); +#235166 = CARTESIAN_POINT('',(150.57405,-53.499999,1.585)); +#235167 = LINE('',#235168,#235169); +#235168 = CARTESIAN_POINT('',(149.859042,-53.738335,1.585)); +#235169 = VECTOR('',#235170,1.); +#235170 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#235171 = ORIENTED_EDGE('',*,*,#235172,.T.); +#235172 = EDGE_CURVE('',#235165,#235173,#235175,.T.); +#235173 = VERTEX_POINT('',#235174); +#235174 = CARTESIAN_POINT('',(149.859042,-53.261663,1.585)); +#235175 = LINE('',#235176,#235177); +#235176 = CARTESIAN_POINT('',(150.57405,-53.499999,1.585)); +#235177 = VECTOR('',#235178,1.); +#235178 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#235179 = ORIENTED_EDGE('',*,*,#235180,.T.); +#235180 = EDGE_CURVE('',#235173,#235181,#235183,.T.); +#235181 = VERTEX_POINT('',#235182); +#235182 = CARTESIAN_POINT('',(149.837009,-53.249103,1.585)); +#235183 = LINE('',#235184,#235185); +#235184 = CARTESIAN_POINT('',(149.859042,-53.261663,1.585)); +#235185 = VECTOR('',#235186,1.); +#235186 = DIRECTION('',(-0.868757082859,0.495238458708,0.)); +#235187 = ORIENTED_EDGE('',*,*,#235188,.T.); +#235188 = EDGE_CURVE('',#235181,#235120,#235189,.T.); +#235189 = LINE('',#235190,#235191); +#235190 = CARTESIAN_POINT('',(149.837009,-53.249103,1.585)); +#235191 = VECTOR('',#235192,1.); +#235192 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#235193 = PLANE('',#235194); +#235194 = AXIS2_PLACEMENT_3D('',#235195,#235196,#235197); +#235195 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235196 = DIRECTION('',(0.,0.,1.)); +#235197 = DIRECTION('',(1.,0.,-0.)); +#235198 = SHELL_BASED_SURFACE_MODEL('',(#235199)); +#235199 = OPEN_SHELL('',(#235200)); +#235200 = ADVANCED_FACE('',(#235201),#235278,.T.); +#235201 = FACE_BOUND('',#235202,.F.); +#235202 = EDGE_LOOP('',(#235203,#235214,#235222,#235230,#235239,#235247, + #235255,#235264,#235272)); +#235203 = ORIENTED_EDGE('',*,*,#235204,.T.); +#235204 = EDGE_CURVE('',#235205,#235207,#235209,.T.); +#235205 = VERTEX_POINT('',#235206); +#235206 = CARTESIAN_POINT('',(142.199545,-53.196554,1.585)); +#235207 = VERTEX_POINT('',#235208); +#235208 = CARTESIAN_POINT('',(142.324597,-53.221428,1.585)); +#235209 = CIRCLE('',#235210,6.499988811648E-02); +#235210 = AXIS2_PLACEMENT_3D('',#235211,#235212,#235213); +#235211 = CARTESIAN_POINT('',(142.25959711188,-53.2214282701,1.585)); +#235212 = DIRECTION('',(0.,0.,-1.)); +#235213 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#235214 = ORIENTED_EDGE('',*,*,#235215,.T.); +#235215 = EDGE_CURVE('',#235207,#235216,#235218,.T.); +#235216 = VERTEX_POINT('',#235217); +#235217 = CARTESIAN_POINT('',(142.324597,-53.41357,1.585)); +#235218 = LINE('',#235219,#235220); +#235219 = CARTESIAN_POINT('',(142.324597,-53.221428,1.585)); +#235220 = VECTOR('',#235221,1.); +#235221 = DIRECTION('',(0.,-1.,0.)); +#235222 = ORIENTED_EDGE('',*,*,#235223,.T.); +#235223 = EDGE_CURVE('',#235216,#235224,#235226,.T.); +#235224 = VERTEX_POINT('',#235225); +#235225 = CARTESIAN_POINT('',(143.159597,-53.41357,1.585)); +#235226 = LINE('',#235227,#235228); +#235227 = CARTESIAN_POINT('',(142.324597,-53.41357,1.585)); +#235228 = VECTOR('',#235229,1.); +#235229 = DIRECTION('',(1.,0.,0.)); +#235230 = ORIENTED_EDGE('',*,*,#235231,.T.); +#235231 = EDGE_CURVE('',#235224,#235232,#235234,.T.); +#235232 = VERTEX_POINT('',#235233); +#235233 = CARTESIAN_POINT('',(143.159597,-53.54357,1.585)); +#235234 = CIRCLE('',#235235,6.500000000092E-02); +#235235 = AXIS2_PLACEMENT_3D('',#235236,#235237,#235238); +#235236 = CARTESIAN_POINT('',(143.15959665513,-53.47857,1.585)); +#235237 = DIRECTION('',(0.,0.,-1.)); +#235238 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#235239 = ORIENTED_EDGE('',*,*,#235240,.T.); +#235240 = EDGE_CURVE('',#235232,#235241,#235243,.T.); +#235241 = VERTEX_POINT('',#235242); +#235242 = CARTESIAN_POINT('',(142.324597,-53.54357,1.585)); +#235243 = LINE('',#235244,#235245); +#235244 = CARTESIAN_POINT('',(143.159597,-53.54357,1.585)); +#235245 = VECTOR('',#235246,1.); +#235246 = DIRECTION('',(-1.,0.,0.)); +#235247 = ORIENTED_EDGE('',*,*,#235248,.T.); +#235248 = EDGE_CURVE('',#235241,#235249,#235251,.T.); +#235249 = VERTEX_POINT('',#235250); +#235250 = CARTESIAN_POINT('',(142.324597,-53.735713,1.585)); +#235251 = LINE('',#235252,#235253); +#235252 = CARTESIAN_POINT('',(142.324597,-53.54357,1.585)); +#235253 = VECTOR('',#235254,1.); +#235254 = DIRECTION('',(0.,-1.,0.)); +#235255 = ORIENTED_EDGE('',*,*,#235256,.T.); +#235256 = EDGE_CURVE('',#235249,#235257,#235259,.T.); +#235257 = VERTEX_POINT('',#235258); +#235258 = CARTESIAN_POINT('',(142.194597,-53.735713,1.585)); +#235259 = CIRCLE('',#235260,6.500000000093E-02); +#235260 = AXIS2_PLACEMENT_3D('',#235261,#235262,#235263); +#235261 = CARTESIAN_POINT('',(142.259597,-53.73571265513,1.585)); +#235262 = DIRECTION('',(-0.,0.,-1.)); +#235263 = DIRECTION('',(0.999999999986,-5.305658244295E-06,-0.)); +#235264 = ORIENTED_EDGE('',*,*,#235265,.T.); +#235265 = EDGE_CURVE('',#235257,#235266,#235268,.T.); +#235266 = VERTEX_POINT('',#235267); +#235267 = CARTESIAN_POINT('',(142.194597,-53.221428,1.585)); +#235268 = LINE('',#235269,#235270); +#235269 = CARTESIAN_POINT('',(142.194597,-53.735713,1.585)); +#235270 = VECTOR('',#235271,1.); +#235271 = DIRECTION('',(0.,1.,0.)); +#235272 = ORIENTED_EDGE('',*,*,#235273,.T.); +#235273 = EDGE_CURVE('',#235266,#235205,#235274,.T.); +#235274 = LINE('',#235275,#235276); +#235275 = CARTESIAN_POINT('',(142.194597,-53.221428,1.585)); +#235276 = VECTOR('',#235277,1.); +#235277 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#235278 = PLANE('',#235279); +#235279 = AXIS2_PLACEMENT_3D('',#235280,#235281,#235282); +#235280 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235281 = DIRECTION('',(0.,0.,1.)); +#235282 = DIRECTION('',(1.,0.,-0.)); +#235283 = SHELL_BASED_SURFACE_MODEL('',(#235284)); +#235284 = OPEN_SHELL('',(#235285)); +#235285 = ADVANCED_FACE('',(#235286,#235387),#235446,.T.); +#235286 = FACE_BOUND('',#235287,.F.); +#235287 = EDGE_LOOP('',(#235288,#235299,#235307,#235315,#235323,#235331, + #235339,#235348,#235356,#235365,#235373,#235381)); +#235288 = ORIENTED_EDGE('',*,*,#235289,.T.); +#235289 = EDGE_CURVE('',#235290,#235292,#235294,.T.); +#235290 = VERTEX_POINT('',#235291); +#235291 = CARTESIAN_POINT('',(134.808013,-53.205389,1.585)); +#235292 = VERTEX_POINT('',#235293); +#235293 = CARTESIAN_POINT('',(135.088666,-53.156146,1.585)); +#235294 = CIRCLE('',#235295,0.327183487819); +#235295 = AXIS2_PLACEMENT_3D('',#235296,#235297,#235298); +#235296 = CARTESIAN_POINT('',(134.99924076591,-53.47087153472,1.585)); +#235297 = DIRECTION('',(0.,0.,-1.)); +#235298 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#235299 = ORIENTED_EDGE('',*,*,#235300,.T.); +#235300 = EDGE_CURVE('',#235292,#235301,#235303,.T.); +#235301 = VERTEX_POINT('',#235302); +#235302 = CARTESIAN_POINT('',(135.191273,-53.211179,1.585)); +#235303 = LINE('',#235304,#235305); +#235304 = CARTESIAN_POINT('',(135.088666,-53.156146,1.585)); +#235305 = VECTOR('',#235306,1.); +#235306 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#235307 = ORIENTED_EDGE('',*,*,#235308,.T.); +#235308 = EDGE_CURVE('',#235301,#235309,#235311,.T.); +#235309 = VERTEX_POINT('',#235310); +#235310 = CARTESIAN_POINT('',(135.246306,-53.270929,1.585)); +#235311 = LINE('',#235312,#235313); +#235312 = CARTESIAN_POINT('',(135.191273,-53.211179,1.585)); +#235313 = VECTOR('',#235314,1.); +#235314 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#235315 = ORIENTED_EDGE('',*,*,#235316,.T.); +#235316 = EDGE_CURVE('',#235309,#235317,#235319,.T.); +#235317 = VERTEX_POINT('',#235318); +#235318 = CARTESIAN_POINT('',(135.293109,-53.371056,1.585)); +#235319 = LINE('',#235320,#235321); +#235320 = CARTESIAN_POINT('',(135.246306,-53.270929,1.585)); +#235321 = VECTOR('',#235322,1.); +#235322 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#235323 = ORIENTED_EDGE('',*,*,#235324,.T.); +#235324 = EDGE_CURVE('',#235317,#235325,#235327,.T.); +#235325 = VERTEX_POINT('',#235326); +#235326 = CARTESIAN_POINT('',(135.296025,-53.66357,1.585)); +#235327 = LINE('',#235328,#235329); +#235328 = CARTESIAN_POINT('',(135.293109,-53.371056,1.585)); +#235329 = VECTOR('',#235330,1.); +#235330 = DIRECTION('',(9.968258341542E-03,-0.999950315679,0.)); +#235331 = ORIENTED_EDGE('',*,*,#235332,.T.); +#235332 = EDGE_CURVE('',#235325,#235333,#235335,.T.); +#235333 = VERTEX_POINT('',#235334); +#235334 = CARTESIAN_POINT('',(135.659597,-53.66357,1.585)); +#235335 = LINE('',#235336,#235337); +#235336 = CARTESIAN_POINT('',(135.296025,-53.66357,1.585)); +#235337 = VECTOR('',#235338,1.); +#235338 = DIRECTION('',(1.,0.,0.)); +#235339 = ORIENTED_EDGE('',*,*,#235340,.T.); +#235340 = EDGE_CURVE('',#235333,#235341,#235343,.T.); +#235341 = VERTEX_POINT('',#235342); +#235342 = CARTESIAN_POINT('',(135.659597,-53.79357,1.585)); +#235343 = CIRCLE('',#235344,6.500000000092E-02); +#235344 = AXIS2_PLACEMENT_3D('',#235345,#235346,#235347); +#235345 = CARTESIAN_POINT('',(135.65959665513,-53.72857,1.585)); +#235346 = DIRECTION('',(0.,0.,-1.)); +#235347 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#235348 = ORIENTED_EDGE('',*,*,#235349,.T.); +#235349 = EDGE_CURVE('',#235341,#235350,#235352,.T.); +#235350 = VERTEX_POINT('',#235351); +#235351 = CARTESIAN_POINT('',(134.759597,-53.79357,1.585)); +#235352 = LINE('',#235353,#235354); +#235353 = CARTESIAN_POINT('',(135.659597,-53.79357,1.585)); +#235354 = VECTOR('',#235355,1.); +#235355 = DIRECTION('',(-1.,0.,0.)); +#235356 = ORIENTED_EDGE('',*,*,#235357,.T.); +#235357 = EDGE_CURVE('',#235350,#235358,#235360,.T.); +#235358 = VERTEX_POINT('',#235359); +#235359 = CARTESIAN_POINT('',(134.694597,-53.72857,1.585)); +#235360 = CIRCLE('',#235361,6.500103935393E-02); +#235361 = AXIS2_PLACEMENT_3D('',#235362,#235363,#235364); +#235362 = CARTESIAN_POINT('',(134.75959803934,-53.72856896065,1.585)); +#235363 = DIRECTION('',(0.,0.,-1.)); +#235364 = DIRECTION('',(-1.598967649219E-05,-0.999999999872,-0.)); +#235365 = ORIENTED_EDGE('',*,*,#235366,.T.); +#235366 = EDGE_CURVE('',#235358,#235367,#235369,.T.); +#235367 = VERTEX_POINT('',#235368); +#235368 = CARTESIAN_POINT('',(134.697512,-53.371056,1.585)); +#235369 = LINE('',#235370,#235371); +#235370 = CARTESIAN_POINT('',(134.694597,-53.72857,1.585)); +#235371 = VECTOR('',#235372,1.); +#235372 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#235373 = ORIENTED_EDGE('',*,*,#235374,.T.); +#235374 = EDGE_CURVE('',#235367,#235375,#235377,.T.); +#235375 = VERTEX_POINT('',#235376); +#235376 = CARTESIAN_POINT('',(134.750702,-53.2627,1.585)); +#235377 = LINE('',#235378,#235379); +#235378 = CARTESIAN_POINT('',(134.697512,-53.371056,1.585)); +#235379 = VECTOR('',#235380,1.); +#235380 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#235381 = ORIENTED_EDGE('',*,*,#235382,.T.); +#235382 = EDGE_CURVE('',#235375,#235290,#235383,.T.); +#235383 = LINE('',#235384,#235385); +#235384 = CARTESIAN_POINT('',(134.750702,-53.2627,1.585)); +#235385 = VECTOR('',#235386,1.); +#235386 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#235387 = FACE_BOUND('',#235388,.F.); +#235388 = EDGE_LOOP('',(#235389,#235400,#235408,#235416,#235424,#235432, + #235440)); +#235389 = ORIENTED_EDGE('',*,*,#235390,.T.); +#235390 = EDGE_CURVE('',#235391,#235393,#235395,.T.); +#235391 = VERTEX_POINT('',#235392); +#235392 = CARTESIAN_POINT('',(135.106808,-53.310562,1.585)); +#235393 = VERTEX_POINT('',#235394); +#235394 = CARTESIAN_POINT('',(134.855875,-53.3385,1.585)); +#235395 = CIRCLE('',#235396,0.180979134862); +#235396 = AXIS2_PLACEMENT_3D('',#235397,#235398,#235399); +#235397 = CARTESIAN_POINT('',(134.99569076987,-53.45341300078,1.585)); +#235398 = DIRECTION('',(0.,0.,1.)); +#235399 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#235400 = ORIENTED_EDGE('',*,*,#235401,.T.); +#235401 = EDGE_CURVE('',#235393,#235402,#235404,.T.); +#235402 = VERTEX_POINT('',#235403); +#235403 = CARTESIAN_POINT('',(134.824597,-53.401057,1.585)); +#235404 = LINE('',#235405,#235406); +#235405 = CARTESIAN_POINT('',(134.855875,-53.3385,1.585)); +#235406 = VECTOR('',#235407,1.); +#235407 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#235408 = ORIENTED_EDGE('',*,*,#235409,.T.); +#235409 = EDGE_CURVE('',#235402,#235410,#235412,.T.); +#235410 = VERTEX_POINT('',#235411); +#235411 = CARTESIAN_POINT('',(134.824597,-53.66357,1.585)); +#235412 = LINE('',#235413,#235414); +#235413 = CARTESIAN_POINT('',(134.824597,-53.401057,1.585)); +#235414 = VECTOR('',#235415,1.); +#235415 = DIRECTION('',(0.,-1.,0.)); +#235416 = ORIENTED_EDGE('',*,*,#235417,.T.); +#235417 = EDGE_CURVE('',#235410,#235418,#235420,.T.); +#235418 = VERTEX_POINT('',#235419); +#235419 = CARTESIAN_POINT('',(135.166025,-53.66357,1.585)); +#235420 = LINE('',#235421,#235422); +#235421 = CARTESIAN_POINT('',(134.824597,-53.66357,1.585)); +#235422 = VECTOR('',#235423,1.); +#235423 = DIRECTION('',(1.,0.,0.)); +#235424 = ORIENTED_EDGE('',*,*,#235425,.T.); +#235425 = EDGE_CURVE('',#235418,#235426,#235428,.T.); +#235426 = VERTEX_POINT('',#235427); +#235427 = CARTESIAN_POINT('',(135.166025,-53.401057,1.585)); +#235428 = LINE('',#235429,#235430); +#235429 = CARTESIAN_POINT('',(135.166025,-53.66357,1.585)); +#235430 = VECTOR('',#235431,1.); +#235431 = DIRECTION('',(0.,1.,0.)); +#235432 = ORIENTED_EDGE('',*,*,#235433,.T.); +#235433 = EDGE_CURVE('',#235426,#235434,#235436,.T.); +#235434 = VERTEX_POINT('',#235435); +#235435 = CARTESIAN_POINT('',(135.134746,-53.3385,1.585)); +#235436 = LINE('',#235437,#235438); +#235437 = CARTESIAN_POINT('',(135.166025,-53.401057,1.585)); +#235438 = VECTOR('',#235439,1.); +#235439 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#235440 = ORIENTED_EDGE('',*,*,#235441,.T.); +#235441 = EDGE_CURVE('',#235434,#235391,#235442,.T.); +#235442 = LINE('',#235443,#235444); +#235443 = CARTESIAN_POINT('',(135.134746,-53.3385,1.585)); +#235444 = VECTOR('',#235445,1.); +#235445 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235446 = PLANE('',#235447); +#235447 = AXIS2_PLACEMENT_3D('',#235448,#235449,#235450); +#235448 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235449 = DIRECTION('',(0.,0.,1.)); +#235450 = DIRECTION('',(1.,0.,-0.)); +#235451 = SHELL_BASED_SURFACE_MODEL('',(#235452)); +#235452 = OPEN_SHELL('',(#235453)); +#235453 = ADVANCED_FACE('',(#235454),#235726,.T.); +#235454 = FACE_BOUND('',#235455,.F.); +#235455 = EDGE_LOOP('',(#235456,#235467,#235475,#235483,#235492,#235500, + #235508,#235516,#235524,#235532,#235540,#235548,#235557,#235565, + #235573,#235581,#235589,#235597,#235606,#235614,#235622,#235631, + #235639,#235647,#235655,#235663,#235671,#235679,#235687,#235696, + #235704,#235712,#235720)); +#235456 = ORIENTED_EDGE('',*,*,#235457,.T.); +#235457 = EDGE_CURVE('',#235458,#235460,#235462,.T.); +#235458 = VERTEX_POINT('',#235459); +#235459 = CARTESIAN_POINT('',(119.39079,-53.122301,1.585)); +#235460 = VERTEX_POINT('',#235461); +#235461 = CARTESIAN_POINT('',(119.514119,-53.16341,1.585)); +#235462 = CIRCLE('',#235463,6.499998485138E-02); +#235463 = AXIS2_PLACEMENT_3D('',#235464,#235465,#235466); +#235464 = CARTESIAN_POINT('',(119.45245436584,-53.14285590248,1.585)); +#235465 = DIRECTION('',(0.,0.,-1.)); +#235466 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#235467 = ORIENTED_EDGE('',*,*,#235468,.T.); +#235468 = EDGE_CURVE('',#235460,#235469,#235471,.T.); +#235469 = VERTEX_POINT('',#235470); +#235470 = CARTESIAN_POINT('',(119.474597,-53.281975,1.585)); +#235471 = LINE('',#235472,#235473); +#235472 = CARTESIAN_POINT('',(119.514119,-53.16341,1.585)); +#235473 = VECTOR('',#235474,1.); +#235474 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#235475 = ORIENTED_EDGE('',*,*,#235476,.T.); +#235476 = EDGE_CURVE('',#235469,#235477,#235479,.T.); +#235477 = VERTEX_POINT('',#235478); +#235478 = CARTESIAN_POINT('',(119.474597,-53.470368,1.585)); +#235479 = LINE('',#235480,#235481); +#235480 = CARTESIAN_POINT('',(119.474597,-53.281975,1.585)); +#235481 = VECTOR('',#235482,1.); +#235482 = DIRECTION('',(0.,-1.,0.)); +#235483 = ORIENTED_EDGE('',*,*,#235484,.T.); +#235484 = EDGE_CURVE('',#235477,#235485,#235487,.T.); +#235485 = VERTEX_POINT('',#235486); +#235486 = CARTESIAN_POINT('',(119.59637,-53.592142,1.585)); +#235487 = CIRCLE('',#235488,0.170995888391); +#235488 = AXIS2_PLACEMENT_3D('',#235489,#235490,#235491); +#235489 = CARTESIAN_POINT('',(119.6399473225,-53.42679203534,1.585)); +#235490 = DIRECTION('',(0.,0.,1.)); +#235491 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#235492 = ORIENTED_EDGE('',*,*,#235493,.T.); +#235493 = EDGE_CURVE('',#235485,#235494,#235496,.T.); +#235494 = VERTEX_POINT('',#235495); +#235495 = CARTESIAN_POINT('',(119.651395,-53.592142,1.585)); +#235496 = LINE('',#235497,#235498); +#235497 = CARTESIAN_POINT('',(119.59637,-53.592142,1.585)); +#235498 = VECTOR('',#235499,1.); +#235499 = DIRECTION('',(1.,0.,0.)); +#235500 = ORIENTED_EDGE('',*,*,#235501,.T.); +#235501 = EDGE_CURVE('',#235494,#235502,#235504,.T.); +#235502 = VERTEX_POINT('',#235503); +#235503 = CARTESIAN_POINT('',(119.713951,-53.560864,1.585)); +#235504 = LINE('',#235505,#235506); +#235505 = CARTESIAN_POINT('',(119.651395,-53.592142,1.585)); +#235506 = VECTOR('',#235507,1.); +#235507 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#235508 = ORIENTED_EDGE('',*,*,#235509,.T.); +#235509 = EDGE_CURVE('',#235502,#235510,#235512,.T.); +#235510 = VERTEX_POINT('',#235511); +#235511 = CARTESIAN_POINT('',(119.741889,-53.532925,1.585)); +#235512 = LINE('',#235513,#235514); +#235513 = CARTESIAN_POINT('',(119.713951,-53.560864,1.585)); +#235514 = VECTOR('',#235515,1.); +#235515 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#235516 = ORIENTED_EDGE('',*,*,#235517,.T.); +#235517 = EDGE_CURVE('',#235510,#235518,#235520,.T.); +#235518 = VERTEX_POINT('',#235519); +#235519 = CARTESIAN_POINT('',(119.776839,-53.463024,1.585)); +#235520 = LINE('',#235521,#235522); +#235521 = CARTESIAN_POINT('',(119.741889,-53.532925,1.585)); +#235522 = VECTOR('',#235523,1.); +#235523 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#235524 = ORIENTED_EDGE('',*,*,#235525,.T.); +#235525 = EDGE_CURVE('',#235518,#235526,#235528,.T.); +#235526 = VERTEX_POINT('',#235527); +#235527 = CARTESIAN_POINT('',(119.822887,-53.285216,1.585)); +#235528 = LINE('',#235529,#235530); +#235529 = CARTESIAN_POINT('',(119.776839,-53.463024,1.585)); +#235530 = VECTOR('',#235531,1.); +#235531 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#235532 = ORIENTED_EDGE('',*,*,#235533,.T.); +#235533 = EDGE_CURVE('',#235526,#235534,#235536,.T.); +#235534 = VERTEX_POINT('',#235535); +#235535 = CARTESIAN_POINT('',(119.87792,-53.182609,1.585)); +#235536 = LINE('',#235537,#235538); +#235537 = CARTESIAN_POINT('',(119.822887,-53.285216,1.585)); +#235538 = VECTOR('',#235539,1.); +#235539 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#235540 = ORIENTED_EDGE('',*,*,#235541,.T.); +#235541 = EDGE_CURVE('',#235534,#235542,#235544,.T.); +#235542 = VERTEX_POINT('',#235543); +#235543 = CARTESIAN_POINT('',(119.937671,-53.127575,1.585)); +#235544 = LINE('',#235545,#235546); +#235545 = CARTESIAN_POINT('',(119.87792,-53.182609,1.585)); +#235546 = VECTOR('',#235547,1.); +#235547 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#235548 = ORIENTED_EDGE('',*,*,#235549,.T.); +#235549 = EDGE_CURVE('',#235542,#235550,#235552,.T.); +#235550 = VERTEX_POINT('',#235551); +#235551 = CARTESIAN_POINT('',(120.167237,-53.084718,1.585)); +#235552 = CIRCLE('',#235553,0.258971949836); +#235553 = AXIS2_PLACEMENT_3D('',#235554,#235555,#235556); +#235554 = CARTESIAN_POINT('',(120.09487456064,-53.33337468736,1.585)); +#235555 = DIRECTION('',(0.,0.,-1.)); +#235556 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#235557 = ORIENTED_EDGE('',*,*,#235558,.T.); +#235558 = EDGE_CURVE('',#235550,#235559,#235561,.T.); +#235559 = VERTEX_POINT('',#235560); +#235560 = CARTESIAN_POINT('',(120.269844,-53.139751,1.585)); +#235561 = LINE('',#235562,#235563); +#235562 = CARTESIAN_POINT('',(120.167237,-53.084718,1.585)); +#235563 = VECTOR('',#235564,1.); +#235564 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#235565 = ORIENTED_EDGE('',*,*,#235566,.T.); +#235566 = EDGE_CURVE('',#235559,#235567,#235569,.T.); +#235567 = VERTEX_POINT('',#235568); +#235568 = CARTESIAN_POINT('',(120.324878,-53.199502,1.585)); +#235569 = LINE('',#235570,#235571); +#235570 = CARTESIAN_POINT('',(120.269844,-53.139751,1.585)); +#235571 = VECTOR('',#235572,1.); +#235572 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#235573 = ORIENTED_EDGE('',*,*,#235574,.T.); +#235574 = EDGE_CURVE('',#235567,#235575,#235577,.T.); +#235575 = VERTEX_POINT('',#235576); +#235576 = CARTESIAN_POINT('',(120.371681,-53.299628,1.585)); +#235577 = LINE('',#235578,#235579); +#235578 = CARTESIAN_POINT('',(120.324878,-53.199502,1.585)); +#235579 = VECTOR('',#235580,1.); +#235580 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#235581 = ORIENTED_EDGE('',*,*,#235582,.T.); +#235582 = EDGE_CURVE('',#235575,#235583,#235585,.T.); +#235583 = VERTEX_POINT('',#235584); +#235584 = CARTESIAN_POINT('',(120.372563,-53.538793,1.585)); +#235585 = LINE('',#235586,#235587); +#235586 = CARTESIAN_POINT('',(120.371681,-53.299628,1.585)); +#235587 = VECTOR('',#235588,1.); +#235588 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#235589 = ORIENTED_EDGE('',*,*,#235590,.T.); +#235590 = EDGE_CURVE('',#235583,#235591,#235593,.T.); +#235591 = VERTEX_POINT('',#235592); +#235592 = CARTESIAN_POINT('',(120.328404,-53.677697,1.585)); +#235593 = LINE('',#235594,#235595); +#235594 = CARTESIAN_POINT('',(120.372563,-53.538793,1.585)); +#235595 = VECTOR('',#235596,1.); +#235596 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#235597 = ORIENTED_EDGE('',*,*,#235598,.T.); +#235598 = EDGE_CURVE('',#235591,#235599,#235601,.T.); +#235599 = VERTEX_POINT('',#235600); +#235600 = CARTESIAN_POINT('',(120.205076,-53.636587,1.585)); +#235601 = CIRCLE('',#235602,6.499966862258E-02); +#235602 = AXIS2_PLACEMENT_3D('',#235603,#235604,#235605); +#235603 = CARTESIAN_POINT('',(120.26674006734,-53.65714179797,1.585)); +#235604 = DIRECTION('',(-0.,0.,-1.)); +#235605 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#235606 = ORIENTED_EDGE('',*,*,#235607,.T.); +#235607 = EDGE_CURVE('',#235599,#235608,#235610,.T.); +#235608 = VERTEX_POINT('',#235609); +#235609 = CARTESIAN_POINT('',(120.244597,-53.518024,1.585)); +#235610 = LINE('',#235611,#235612); +#235611 = CARTESIAN_POINT('',(120.205076,-53.636587,1.585)); +#235612 = VECTOR('',#235613,1.); +#235613 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#235614 = ORIENTED_EDGE('',*,*,#235615,.T.); +#235615 = EDGE_CURVE('',#235608,#235616,#235618,.T.); +#235616 = VERTEX_POINT('',#235617); +#235617 = CARTESIAN_POINT('',(120.244597,-53.32963,1.585)); +#235618 = LINE('',#235619,#235620); +#235619 = CARTESIAN_POINT('',(120.244597,-53.518024,1.585)); +#235620 = VECTOR('',#235621,1.); +#235621 = DIRECTION('',(0.,1.,0.)); +#235622 = ORIENTED_EDGE('',*,*,#235623,.T.); +#235623 = EDGE_CURVE('',#235616,#235624,#235626,.T.); +#235624 = VERTEX_POINT('',#235625); +#235625 = CARTESIAN_POINT('',(120.122823,-53.207856,1.585)); +#235626 = CIRCLE('',#235627,0.170999251022); +#235627 = AXIS2_PLACEMENT_3D('',#235628,#235629,#235630); +#235628 = CARTESIAN_POINT('',(120.079244,-53.373209,1.585)); +#235629 = DIRECTION('',(0.,0.,1.)); +#235630 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#235631 = ORIENTED_EDGE('',*,*,#235632,.T.); +#235632 = EDGE_CURVE('',#235624,#235633,#235635,.T.); +#235633 = VERTEX_POINT('',#235634); +#235634 = CARTESIAN_POINT('',(120.067799,-53.207856,1.585)); +#235635 = LINE('',#235636,#235637); +#235636 = CARTESIAN_POINT('',(120.122823,-53.207856,1.585)); +#235637 = VECTOR('',#235638,1.); +#235638 = DIRECTION('',(-1.,0.,0.)); +#235639 = ORIENTED_EDGE('',*,*,#235640,.T.); +#235640 = EDGE_CURVE('',#235633,#235641,#235643,.T.); +#235641 = VERTEX_POINT('',#235642); +#235642 = CARTESIAN_POINT('',(120.005243,-53.239134,1.585)); +#235643 = LINE('',#235644,#235645); +#235644 = CARTESIAN_POINT('',(120.067799,-53.207856,1.585)); +#235645 = VECTOR('',#235646,1.); +#235646 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#235647 = ORIENTED_EDGE('',*,*,#235648,.T.); +#235648 = EDGE_CURVE('',#235641,#235649,#235651,.T.); +#235649 = VERTEX_POINT('',#235650); +#235650 = CARTESIAN_POINT('',(119.977303,-53.267074,1.585)); +#235651 = LINE('',#235652,#235653); +#235652 = CARTESIAN_POINT('',(120.005243,-53.239134,1.585)); +#235653 = VECTOR('',#235654,1.); +#235654 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#235655 = ORIENTED_EDGE('',*,*,#235656,.T.); +#235656 = EDGE_CURVE('',#235649,#235657,#235659,.T.); +#235657 = VERTEX_POINT('',#235658); +#235658 = CARTESIAN_POINT('',(119.942353,-53.336974,1.585)); +#235659 = LINE('',#235660,#235661); +#235660 = CARTESIAN_POINT('',(119.977303,-53.267074,1.585)); +#235661 = VECTOR('',#235662,1.); +#235662 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#235663 = ORIENTED_EDGE('',*,*,#235664,.T.); +#235664 = EDGE_CURVE('',#235657,#235665,#235667,.T.); +#235665 = VERTEX_POINT('',#235666); +#235666 = CARTESIAN_POINT('',(119.896306,-53.514782,1.585)); +#235667 = LINE('',#235668,#235669); +#235668 = CARTESIAN_POINT('',(119.942353,-53.336974,1.585)); +#235669 = VECTOR('',#235670,1.); +#235670 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#235671 = ORIENTED_EDGE('',*,*,#235672,.T.); +#235672 = EDGE_CURVE('',#235665,#235673,#235675,.T.); +#235673 = VERTEX_POINT('',#235674); +#235674 = CARTESIAN_POINT('',(119.841273,-53.61739,1.585)); +#235675 = LINE('',#235676,#235677); +#235676 = CARTESIAN_POINT('',(119.896306,-53.514782,1.585)); +#235677 = VECTOR('',#235678,1.); +#235678 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#235679 = ORIENTED_EDGE('',*,*,#235680,.T.); +#235680 = EDGE_CURVE('',#235673,#235681,#235683,.T.); +#235681 = VERTEX_POINT('',#235682); +#235682 = CARTESIAN_POINT('',(119.781523,-53.672423,1.585)); +#235683 = LINE('',#235684,#235685); +#235684 = CARTESIAN_POINT('',(119.841273,-53.61739,1.585)); +#235685 = VECTOR('',#235686,1.); +#235686 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#235687 = ORIENTED_EDGE('',*,*,#235688,.T.); +#235688 = EDGE_CURVE('',#235681,#235689,#235691,.T.); +#235689 = VERTEX_POINT('',#235690); +#235690 = CARTESIAN_POINT('',(119.458013,-53.666036,1.585)); +#235691 = CIRCLE('',#235692,0.260197694649); +#235692 = AXIS2_PLACEMENT_3D('',#235693,#235694,#235695); +#235693 = CARTESIAN_POINT('',(119.62379048924,-53.46548509783,1.585)); +#235694 = DIRECTION('',(-0.,0.,-1.)); +#235695 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#235696 = ORIENTED_EDGE('',*,*,#235697,.T.); +#235697 = EDGE_CURVE('',#235689,#235698,#235700,.T.); +#235698 = VERTEX_POINT('',#235699); +#235699 = CARTESIAN_POINT('',(119.400702,-53.608725,1.585)); +#235700 = LINE('',#235701,#235702); +#235701 = CARTESIAN_POINT('',(119.458013,-53.666036,1.585)); +#235702 = VECTOR('',#235703,1.); +#235703 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235704 = ORIENTED_EDGE('',*,*,#235705,.T.); +#235705 = EDGE_CURVE('',#235698,#235706,#235708,.T.); +#235706 = VERTEX_POINT('',#235707); +#235707 = CARTESIAN_POINT('',(119.347512,-53.500369,1.585)); +#235708 = LINE('',#235709,#235710); +#235709 = CARTESIAN_POINT('',(119.400702,-53.608725,1.585)); +#235710 = VECTOR('',#235711,1.); +#235711 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#235712 = ORIENTED_EDGE('',*,*,#235713,.T.); +#235713 = EDGE_CURVE('',#235706,#235714,#235716,.T.); +#235714 = VERTEX_POINT('',#235715); +#235715 = CARTESIAN_POINT('',(119.34663,-53.261205,1.585)); +#235716 = LINE('',#235717,#235718); +#235717 = CARTESIAN_POINT('',(119.347512,-53.500369,1.585)); +#235718 = VECTOR('',#235719,1.); +#235719 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#235720 = ORIENTED_EDGE('',*,*,#235721,.T.); +#235721 = EDGE_CURVE('',#235714,#235458,#235722,.T.); +#235722 = LINE('',#235723,#235724); +#235723 = CARTESIAN_POINT('',(119.34663,-53.261205,1.585)); +#235724 = VECTOR('',#235725,1.); +#235725 = DIRECTION('',(0.302974833624,0.952998557287,0.)); +#235726 = PLANE('',#235727); +#235727 = AXIS2_PLACEMENT_3D('',#235728,#235729,#235730); +#235728 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235729 = DIRECTION('',(0.,0.,1.)); +#235730 = DIRECTION('',(1.,0.,-0.)); +#235731 = SHELL_BASED_SURFACE_MODEL('',(#235732)); +#235732 = OPEN_SHELL('',(#235733)); +#235733 = ADVANCED_FACE('',(#235734),#235904,.T.); +#235734 = FACE_BOUND('',#235735,.F.); +#235735 = EDGE_LOOP('',(#235736,#235747,#235755,#235764,#235772,#235781, + #235789,#235797,#235805,#235814,#235822,#235831,#235839,#235848, + #235856,#235865,#235873,#235881,#235889,#235898)); +#235736 = ORIENTED_EDGE('',*,*,#235737,.T.); +#235737 = EDGE_CURVE('',#235738,#235740,#235742,.T.); +#235738 = VERTEX_POINT('',#235739); +#235739 = CARTESIAN_POINT('',(121.949349,-53.032608,1.585)); +#235740 = VERTEX_POINT('',#235741); +#235741 = CARTESIAN_POINT('',(122.041273,-53.124532,1.585)); +#235742 = CIRCLE('',#235743,6.50000837538E-02); +#235743 = AXIS2_PLACEMENT_3D('',#235744,#235745,#235746); +#235744 = CARTESIAN_POINT('',(121.99531098493,-53.07857001506,1.585)); +#235745 = DIRECTION('',(0.,0.,-1.)); +#235746 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#235747 = ORIENTED_EDGE('',*,*,#235748,.T.); +#235748 = EDGE_CURVE('',#235740,#235749,#235751,.T.); +#235749 = VERTEX_POINT('',#235750); +#235750 = CARTESIAN_POINT('',(122.009266,-53.156538,1.585)); +#235751 = LINE('',#235752,#235753); +#235752 = CARTESIAN_POINT('',(122.041273,-53.124532,1.585)); +#235753 = VECTOR('',#235754,1.); +#235754 = DIRECTION('',(-0.7071178274,-0.7070957348,0.)); +#235755 = ORIENTED_EDGE('',*,*,#235756,.T.); +#235756 = EDGE_CURVE('',#235749,#235757,#235759,.T.); +#235757 = VERTEX_POINT('',#235758); +#235758 = CARTESIAN_POINT('',(122.009265,-53.429171,1.585)); +#235759 = CIRCLE('',#235760,0.272201331757); +#235760 = AXIS2_PLACEMENT_3D('',#235761,#235762,#235763); +#235761 = CARTESIAN_POINT('',(122.24487402454,-53.29285536419,1.585)); +#235762 = DIRECTION('',(0.,0.,1.)); +#235763 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#235764 = ORIENTED_EDGE('',*,*,#235765,.T.); +#235765 = EDGE_CURVE('',#235757,#235766,#235768,.T.); +#235766 = VERTEX_POINT('',#235767); +#235767 = CARTESIAN_POINT('',(122.076669,-53.496577,1.585)); +#235768 = LINE('',#235769,#235770); +#235769 = CARTESIAN_POINT('',(122.009265,-53.429171,1.585)); +#235770 = VECTOR('',#235771,1.); +#235771 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#235772 = ORIENTED_EDGE('',*,*,#235773,.T.); +#235773 = EDGE_CURVE('',#235766,#235774,#235776,.T.); +#235774 = VERTEX_POINT('',#235775); +#235775 = CARTESIAN_POINT('',(122.415881,-53.570713,1.585)); +#235776 = CIRCLE('',#235777,0.553317785495); +#235777 = AXIS2_PLACEMENT_3D('',#235778,#235779,#235780); +#235778 = CARTESIAN_POINT('',(122.3584500839,-53.02038376979,1.585)); +#235779 = DIRECTION('',(0.,0.,1.)); +#235780 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#235781 = ORIENTED_EDGE('',*,*,#235782,.T.); +#235782 = EDGE_CURVE('',#235774,#235783,#235785,.T.); +#235783 = VERTEX_POINT('',#235784); +#235784 = CARTESIAN_POINT('',(122.572622,-53.531527,1.585)); +#235785 = LINE('',#235786,#235787); +#235786 = CARTESIAN_POINT('',(122.415881,-53.570713,1.585)); +#235787 = VECTOR('',#235788,1.); +#235788 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#235789 = ORIENTED_EDGE('',*,*,#235790,.T.); +#235790 = EDGE_CURVE('',#235783,#235791,#235793,.T.); +#235791 = VERTEX_POINT('',#235792); +#235792 = CARTESIAN_POINT('',(122.642522,-53.496578,1.585)); +#235793 = LINE('',#235794,#235795); +#235794 = CARTESIAN_POINT('',(122.572622,-53.531527,1.585)); +#235795 = VECTOR('',#235796,1.); +#235796 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#235797 = ORIENTED_EDGE('',*,*,#235798,.T.); +#235798 = EDGE_CURVE('',#235791,#235799,#235801,.T.); +#235799 = VERTEX_POINT('',#235800); +#235800 = CARTESIAN_POINT('',(122.709928,-53.429171,1.585)); +#235801 = LINE('',#235802,#235803); +#235802 = CARTESIAN_POINT('',(122.642522,-53.496578,1.585)); +#235803 = VECTOR('',#235804,1.); +#235804 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#235805 = ORIENTED_EDGE('',*,*,#235806,.T.); +#235806 = EDGE_CURVE('',#235799,#235807,#235809,.T.); +#235807 = VERTEX_POINT('',#235808); +#235808 = CARTESIAN_POINT('',(122.709928,-53.156539,1.585)); +#235809 = CIRCLE('',#235810,0.272194686174); +#235810 = AXIS2_PLACEMENT_3D('',#235811,#235812,#235813); +#235811 = CARTESIAN_POINT('',(122.47432686391,-53.292855,1.585)); +#235812 = DIRECTION('',(0.,-0.,1.)); +#235813 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#235814 = ORIENTED_EDGE('',*,*,#235815,.T.); +#235815 = EDGE_CURVE('',#235807,#235816,#235818,.T.); +#235816 = VERTEX_POINT('',#235817); +#235817 = CARTESIAN_POINT('',(122.677921,-53.124532,1.585)); +#235818 = LINE('',#235819,#235820); +#235819 = CARTESIAN_POINT('',(122.709928,-53.156539,1.585)); +#235820 = VECTOR('',#235821,1.); +#235821 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#235822 = ORIENTED_EDGE('',*,*,#235823,.T.); +#235823 = EDGE_CURVE('',#235816,#235824,#235826,.T.); +#235824 = VERTEX_POINT('',#235825); +#235825 = CARTESIAN_POINT('',(122.769843,-53.032608,1.585)); +#235826 = CIRCLE('',#235827,6.499937665169E-02); +#235827 = AXIS2_PLACEMENT_3D('',#235828,#235829,#235830); +#235828 = CARTESIAN_POINT('',(122.72388176676,-53.07856976677,1.585)); +#235829 = DIRECTION('',(0.,0.,-1.)); +#235830 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#235831 = ORIENTED_EDGE('',*,*,#235832,.T.); +#235832 = EDGE_CURVE('',#235824,#235833,#235835,.T.); +#235833 = VERTEX_POINT('',#235834); +#235834 = CARTESIAN_POINT('',(122.821003,-53.087889,1.585)); +#235835 = LINE('',#235836,#235837); +#235836 = CARTESIAN_POINT('',(122.769843,-53.032608,1.585)); +#235837 = VECTOR('',#235838,1.); +#235838 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#235839 = ORIENTED_EDGE('',*,*,#235840,.T.); +#235840 = EDGE_CURVE('',#235833,#235841,#235843,.T.); +#235841 = VERTEX_POINT('',#235842); +#235842 = CARTESIAN_POINT('',(122.820999,-53.497827,1.585)); +#235843 = CIRCLE('',#235844,0.409312568567); +#235844 = AXIS2_PLACEMENT_3D('',#235845,#235846,#235847); +#235845 = CARTESIAN_POINT('',(122.46670664806,-53.29285454294,1.585)); +#235846 = DIRECTION('',(0.,0.,-1.)); +#235847 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#235848 = ORIENTED_EDGE('',*,*,#235849,.T.); +#235849 = EDGE_CURVE('',#235841,#235850,#235852,.T.); +#235850 = VERTEX_POINT('',#235851); +#235851 = CARTESIAN_POINT('',(122.718322,-53.60175,1.585)); +#235852 = LINE('',#235853,#235854); +#235853 = CARTESIAN_POINT('',(122.820999,-53.497827,1.585)); +#235854 = VECTOR('',#235855,1.); +#235855 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#235856 = ORIENTED_EDGE('',*,*,#235857,.T.); +#235857 = EDGE_CURVE('',#235850,#235858,#235860,.T.); +#235858 = VERTEX_POINT('',#235859); +#235859 = CARTESIAN_POINT('',(122.279546,-53.698772,1.585)); +#235860 = CIRCLE('',#235861,0.675422176574); +#235861 = AXIS2_PLACEMENT_3D('',#235862,#235863,#235864); +#235862 = CARTESIAN_POINT('',(122.36141275007,-53.02832964465,1.585)); +#235863 = DIRECTION('',(0.,0.,-1.)); +#235864 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#235865 = ORIENTED_EDGE('',*,*,#235866,.T.); +#235866 = EDGE_CURVE('',#235858,#235867,#235869,.T.); +#235867 = VERTEX_POINT('',#235868); +#235868 = CARTESIAN_POINT('',(122.094813,-53.650994,1.585)); +#235869 = LINE('',#235870,#235871); +#235870 = CARTESIAN_POINT('',(122.279546,-53.698772,1.585)); +#235871 = VECTOR('',#235872,1.); +#235872 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#235873 = ORIENTED_EDGE('',*,*,#235874,.T.); +#235874 = EDGE_CURVE('',#235867,#235875,#235877,.T.); +#235875 = VERTEX_POINT('',#235876); +#235876 = CARTESIAN_POINT('',(121.992206,-53.595961,1.585)); +#235877 = LINE('',#235878,#235879); +#235878 = CARTESIAN_POINT('',(122.094813,-53.650994,1.585)); +#235879 = VECTOR('',#235880,1.); +#235880 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#235881 = ORIENTED_EDGE('',*,*,#235882,.T.); +#235882 = EDGE_CURVE('',#235875,#235883,#235885,.T.); +#235883 = VERTEX_POINT('',#235884); +#235884 = CARTESIAN_POINT('',(121.898191,-53.497823,1.585)); +#235885 = LINE('',#235886,#235887); +#235886 = CARTESIAN_POINT('',(121.992206,-53.595961,1.585)); +#235887 = VECTOR('',#235888,1.); +#235888 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#235889 = ORIENTED_EDGE('',*,*,#235890,.T.); +#235890 = EDGE_CURVE('',#235883,#235891,#235893,.T.); +#235891 = VERTEX_POINT('',#235892); +#235892 = CARTESIAN_POINT('',(121.898194,-53.087883,1.585)); +#235893 = CIRCLE('',#235894,0.409312909751); +#235894 = AXIS2_PLACEMENT_3D('',#235895,#235896,#235897); +#235895 = CARTESIAN_POINT('',(122.25248666757,-53.29285559277,1.585)); +#235896 = DIRECTION('',(0.,0.,-1.)); +#235897 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#235898 = ORIENTED_EDGE('',*,*,#235899,.T.); +#235899 = EDGE_CURVE('',#235891,#235738,#235900,.T.); +#235900 = LINE('',#235901,#235902); +#235901 = CARTESIAN_POINT('',(121.898194,-53.087883,1.585)); +#235902 = VECTOR('',#235903,1.); +#235903 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#235904 = PLANE('',#235905); +#235905 = AXIS2_PLACEMENT_3D('',#235906,#235907,#235908); +#235906 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235907 = DIRECTION('',(0.,0.,1.)); +#235908 = DIRECTION('',(1.,0.,-0.)); +#235909 = SHELL_BASED_SURFACE_MODEL('',(#235910)); +#235910 = OPEN_SHELL('',(#235911)); +#235911 = ADVANCED_FACE('',(#235912),#235956,.T.); +#235912 = FACE_BOUND('',#235913,.F.); +#235913 = EDGE_LOOP('',(#235914,#235925,#235933,#235942,#235950)); +#235914 = ORIENTED_EDGE('',*,*,#235915,.T.); +#235915 = EDGE_CURVE('',#235916,#235918,#235920,.T.); +#235916 = VERTEX_POINT('',#235917); +#235917 = CARTESIAN_POINT('',(124.976688,-52.903697,1.585)); +#235918 = VERTEX_POINT('',#235919); +#235919 = CARTESIAN_POINT('',(125.10174,-52.928571,1.585)); +#235920 = CIRCLE('',#235921,6.499988811649E-02); +#235921 = AXIS2_PLACEMENT_3D('',#235922,#235923,#235924); +#235922 = CARTESIAN_POINT('',(125.03674011188,-52.9285712701,1.585)); +#235923 = DIRECTION('',(0.,0.,-1.)); +#235924 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#235925 = ORIENTED_EDGE('',*,*,#235926,.T.); +#235926 = EDGE_CURVE('',#235918,#235927,#235929,.T.); +#235927 = VERTEX_POINT('',#235928); +#235928 = CARTESIAN_POINT('',(125.10174,-53.614285,1.585)); +#235929 = LINE('',#235930,#235931); +#235930 = CARTESIAN_POINT('',(125.10174,-52.928571,1.585)); +#235931 = VECTOR('',#235932,1.); +#235932 = DIRECTION('',(0.,-1.,0.)); +#235933 = ORIENTED_EDGE('',*,*,#235934,.T.); +#235934 = EDGE_CURVE('',#235927,#235935,#235937,.T.); +#235935 = VERTEX_POINT('',#235936); +#235936 = CARTESIAN_POINT('',(124.97174,-53.614285,1.585)); +#235937 = CIRCLE('',#235938,6.500000000092E-02); +#235938 = AXIS2_PLACEMENT_3D('',#235939,#235940,#235941); +#235939 = CARTESIAN_POINT('',(125.03674,-53.61428465513,1.585)); +#235940 = DIRECTION('',(-0.,0.,-1.)); +#235941 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#235942 = ORIENTED_EDGE('',*,*,#235943,.T.); +#235943 = EDGE_CURVE('',#235935,#235944,#235946,.T.); +#235944 = VERTEX_POINT('',#235945); +#235945 = CARTESIAN_POINT('',(124.97174,-52.928571,1.585)); +#235946 = LINE('',#235947,#235948); +#235947 = CARTESIAN_POINT('',(124.97174,-53.614285,1.585)); +#235948 = VECTOR('',#235949,1.); +#235949 = DIRECTION('',(0.,1.,0.)); +#235950 = ORIENTED_EDGE('',*,*,#235951,.T.); +#235951 = EDGE_CURVE('',#235944,#235916,#235952,.T.); +#235952 = LINE('',#235953,#235954); +#235953 = CARTESIAN_POINT('',(124.97174,-52.928571,1.585)); +#235954 = VECTOR('',#235955,1.); +#235955 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#235956 = PLANE('',#235957); +#235957 = AXIS2_PLACEMENT_3D('',#235958,#235959,#235960); +#235958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235959 = DIRECTION('',(0.,0.,1.)); +#235960 = DIRECTION('',(1.,0.,-0.)); +#235961 = SHELL_BASED_SURFACE_MODEL('',(#235962)); +#235962 = OPEN_SHELL('',(#235963)); +#235963 = ADVANCED_FACE('',(#235964),#236008,.T.); +#235964 = FACE_BOUND('',#235965,.F.); +#235965 = EDGE_LOOP('',(#235966,#235977,#235985,#235994,#236002)); +#235966 = ORIENTED_EDGE('',*,*,#235967,.T.); +#235967 = EDGE_CURVE('',#235968,#235970,#235972,.T.); +#235968 = VERTEX_POINT('',#235969); +#235969 = CARTESIAN_POINT('',(175.276217,-53.309559,1.585)); +#235970 = VERTEX_POINT('',#235971); +#235971 = CARTESIAN_POINT('',(175.39165,-53.33252,1.585)); +#235972 = CIRCLE('',#235973,6.000007318647E-02); +#235973 = AXIS2_PLACEMENT_3D('',#235974,#235975,#235976); +#235974 = CARTESIAN_POINT('',(175.33164992681,-53.33251982331,1.585)); +#235975 = DIRECTION('',(0.,0.,-1.)); +#235976 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#235977 = ORIENTED_EDGE('',*,*,#235978,.T.); +#235978 = EDGE_CURVE('',#235970,#235979,#235981,.T.); +#235979 = VERTEX_POINT('',#235980); +#235980 = CARTESIAN_POINT('',(175.39165,-53.61368,1.585)); +#235981 = LINE('',#235982,#235983); +#235982 = CARTESIAN_POINT('',(175.39165,-53.33252,1.585)); +#235983 = VECTOR('',#235984,1.); +#235984 = DIRECTION('',(0.,-1.,0.)); +#235985 = ORIENTED_EDGE('',*,*,#235986,.T.); +#235986 = EDGE_CURVE('',#235979,#235987,#235989,.T.); +#235987 = VERTEX_POINT('',#235988); +#235988 = CARTESIAN_POINT('',(175.27165,-53.61368,1.585)); +#235989 = CIRCLE('',#235990,6.000000000043E-02); +#235990 = AXIS2_PLACEMENT_3D('',#235991,#235992,#235993); +#235991 = CARTESIAN_POINT('',(175.33165,-53.61368022558,1.585)); +#235992 = DIRECTION('',(0.,0.,-1.)); +#235993 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#235994 = ORIENTED_EDGE('',*,*,#235995,.T.); +#235995 = EDGE_CURVE('',#235987,#235996,#235998,.T.); +#235996 = VERTEX_POINT('',#235997); +#235997 = CARTESIAN_POINT('',(175.27165,-53.33252,1.585)); +#235998 = LINE('',#235999,#236000); +#235999 = CARTESIAN_POINT('',(175.27165,-53.61368,1.585)); +#236000 = VECTOR('',#236001,1.); +#236001 = DIRECTION('',(0.,1.,0.)); +#236002 = ORIENTED_EDGE('',*,*,#236003,.T.); +#236003 = EDGE_CURVE('',#235996,#235968,#236004,.T.); +#236004 = LINE('',#236005,#236006); +#236005 = CARTESIAN_POINT('',(175.27165,-53.33252,1.585)); +#236006 = VECTOR('',#236007,1.); +#236007 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#236008 = PLANE('',#236009); +#236009 = AXIS2_PLACEMENT_3D('',#236010,#236011,#236012); +#236010 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236011 = DIRECTION('',(0.,0.,1.)); +#236012 = DIRECTION('',(1.,0.,-0.)); +#236013 = SHELL_BASED_SURFACE_MODEL('',(#236014)); +#236014 = OPEN_SHELL('',(#236015)); +#236015 = ADVANCED_FACE('',(#236016),#236060,.T.); +#236016 = FACE_BOUND('',#236017,.F.); +#236017 = EDGE_LOOP('',(#236018,#236029,#236037,#236046,#236054)); +#236018 = ORIENTED_EDGE('',*,*,#236019,.T.); +#236019 = EDGE_CURVE('',#236020,#236022,#236024,.T.); +#236020 = VERTEX_POINT('',#236021); +#236021 = CARTESIAN_POINT('',(176.296217,-53.309559,1.585)); +#236022 = VERTEX_POINT('',#236023); +#236023 = CARTESIAN_POINT('',(176.41165,-53.33252,1.585)); +#236024 = CIRCLE('',#236025,6.000007318647E-02); +#236025 = AXIS2_PLACEMENT_3D('',#236026,#236027,#236028); +#236026 = CARTESIAN_POINT('',(176.35164992681,-53.33251982331,1.585)); +#236027 = DIRECTION('',(0.,0.,-1.)); +#236028 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#236029 = ORIENTED_EDGE('',*,*,#236030,.T.); +#236030 = EDGE_CURVE('',#236022,#236031,#236033,.T.); +#236031 = VERTEX_POINT('',#236032); +#236032 = CARTESIAN_POINT('',(176.41165,-53.61368,1.585)); +#236033 = LINE('',#236034,#236035); +#236034 = CARTESIAN_POINT('',(176.41165,-53.33252,1.585)); +#236035 = VECTOR('',#236036,1.); +#236036 = DIRECTION('',(0.,-1.,0.)); +#236037 = ORIENTED_EDGE('',*,*,#236038,.T.); +#236038 = EDGE_CURVE('',#236031,#236039,#236041,.T.); +#236039 = VERTEX_POINT('',#236040); +#236040 = CARTESIAN_POINT('',(176.29165,-53.61368,1.585)); +#236041 = CIRCLE('',#236042,6.000000000043E-02); +#236042 = AXIS2_PLACEMENT_3D('',#236043,#236044,#236045); +#236043 = CARTESIAN_POINT('',(176.35165,-53.61368022558,1.585)); +#236044 = DIRECTION('',(0.,0.,-1.)); +#236045 = DIRECTION('',(0.999999999993,3.759793898412E-06,0.)); +#236046 = ORIENTED_EDGE('',*,*,#236047,.T.); +#236047 = EDGE_CURVE('',#236039,#236048,#236050,.T.); +#236048 = VERTEX_POINT('',#236049); +#236049 = CARTESIAN_POINT('',(176.29165,-53.33252,1.585)); +#236050 = LINE('',#236051,#236052); +#236051 = CARTESIAN_POINT('',(176.29165,-53.61368,1.585)); +#236052 = VECTOR('',#236053,1.); +#236053 = DIRECTION('',(0.,1.,0.)); +#236054 = ORIENTED_EDGE('',*,*,#236055,.T.); +#236055 = EDGE_CURVE('',#236048,#236020,#236056,.T.); +#236056 = LINE('',#236057,#236058); +#236057 = CARTESIAN_POINT('',(176.29165,-53.33252,1.585)); +#236058 = VECTOR('',#236059,1.); +#236059 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#236060 = PLANE('',#236061); +#236061 = AXIS2_PLACEMENT_3D('',#236062,#236063,#236064); +#236062 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236063 = DIRECTION('',(0.,0.,1.)); +#236064 = DIRECTION('',(1.,0.,-0.)); +#236065 = SHELL_BASED_SURFACE_MODEL('',(#236066)); +#236066 = OPEN_SHELL('',(#236067)); +#236067 = ADVANCED_FACE('',(#236068),#236145,.T.); +#236068 = FACE_BOUND('',#236069,.F.); +#236069 = EDGE_LOOP('',(#236070,#236081,#236089,#236098,#236106,#236115, + #236123,#236131,#236139)); +#236070 = ORIENTED_EDGE('',*,*,#236071,.T.); +#236071 = EDGE_CURVE('',#236072,#236074,#236076,.T.); +#236072 = VERTEX_POINT('',#236073); +#236073 = CARTESIAN_POINT('',(129.494761,-53.004606,1.585)); +#236074 = VERTEX_POINT('',#236075); +#236075 = CARTESIAN_POINT('',(129.580152,-52.938335,1.585)); +#236076 = CIRCLE('',#236077,6.499990070435E-02); +#236077 = AXIS2_PLACEMENT_3D('',#236078,#236079,#236080); +#236078 = CARTESIAN_POINT('',(129.55959745813,-52.99999939734,1.585)); +#236079 = DIRECTION('',(0.,0.,-1.)); +#236080 = DIRECTION('',(-0.997485495103,-7.087091829089E-02,-0.)); +#236081 = ORIENTED_EDGE('',*,*,#236082,.T.); +#236082 = EDGE_CURVE('',#236074,#236083,#236085,.T.); +#236083 = VERTEX_POINT('',#236084); +#236084 = CARTESIAN_POINT('',(130.480152,-53.238334,1.585)); +#236085 = LINE('',#236086,#236087); +#236086 = CARTESIAN_POINT('',(129.580152,-52.938335,1.585)); +#236087 = VECTOR('',#236088,1.); +#236088 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#236089 = ORIENTED_EDGE('',*,*,#236090,.T.); +#236090 = EDGE_CURVE('',#236083,#236091,#236093,.T.); +#236091 = VERTEX_POINT('',#236092); +#236092 = CARTESIAN_POINT('',(130.480152,-53.361664,1.585)); +#236093 = CIRCLE('',#236094,6.500111611217E-02); +#236094 = AXIS2_PLACEMENT_3D('',#236095,#236096,#236097); +#236095 = CARTESIAN_POINT('',(130.45959542268,-53.299999,1.585)); +#236096 = DIRECTION('',(0.,0.,-1.)); +#236097 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#236098 = ORIENTED_EDGE('',*,*,#236099,.T.); +#236099 = EDGE_CURVE('',#236091,#236100,#236102,.T.); +#236100 = VERTEX_POINT('',#236101); +#236101 = CARTESIAN_POINT('',(129.580152,-53.661663,1.585)); +#236102 = LINE('',#236103,#236104); +#236103 = CARTESIAN_POINT('',(130.480152,-53.361664,1.585)); +#236104 = VECTOR('',#236105,1.); +#236105 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#236106 = ORIENTED_EDGE('',*,*,#236107,.T.); +#236107 = EDGE_CURVE('',#236100,#236108,#236110,.T.); +#236108 = VERTEX_POINT('',#236109); +#236109 = CARTESIAN_POINT('',(129.539042,-53.538335,1.585)); +#236110 = CIRCLE('',#236111,6.499966862238E-02); +#236111 = AXIS2_PLACEMENT_3D('',#236112,#236113,#236114); +#236112 = CARTESIAN_POINT('',(129.55959712923,-53.59999895692,1.585)); +#236113 = DIRECTION('',(0.,0.,-1.)); +#236114 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#236115 = ORIENTED_EDGE('',*,*,#236116,.T.); +#236116 = EDGE_CURVE('',#236108,#236117,#236119,.T.); +#236117 = VERTEX_POINT('',#236118); +#236118 = CARTESIAN_POINT('',(130.25405,-53.299999,1.585)); +#236119 = LINE('',#236120,#236121); +#236120 = CARTESIAN_POINT('',(129.539042,-53.538335,1.585)); +#236121 = VECTOR('',#236122,1.); +#236122 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#236123 = ORIENTED_EDGE('',*,*,#236124,.T.); +#236124 = EDGE_CURVE('',#236117,#236125,#236127,.T.); +#236125 = VERTEX_POINT('',#236126); +#236126 = CARTESIAN_POINT('',(129.539042,-53.061663,1.585)); +#236127 = LINE('',#236128,#236129); +#236128 = CARTESIAN_POINT('',(130.25405,-53.299999,1.585)); +#236129 = VECTOR('',#236130,1.); +#236130 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#236131 = ORIENTED_EDGE('',*,*,#236132,.T.); +#236132 = EDGE_CURVE('',#236125,#236133,#236135,.T.); +#236133 = VERTEX_POINT('',#236134); +#236134 = CARTESIAN_POINT('',(129.517009,-53.049103,1.585)); +#236135 = LINE('',#236136,#236137); +#236136 = CARTESIAN_POINT('',(129.539042,-53.061663,1.585)); +#236137 = VECTOR('',#236138,1.); +#236138 = DIRECTION('',(-0.868757082859,0.495238458708,0.)); +#236139 = ORIENTED_EDGE('',*,*,#236140,.T.); +#236140 = EDGE_CURVE('',#236133,#236072,#236141,.T.); +#236141 = LINE('',#236142,#236143); +#236142 = CARTESIAN_POINT('',(129.517009,-53.049103,1.585)); +#236143 = VECTOR('',#236144,1.); +#236144 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#236145 = PLANE('',#236146); +#236146 = AXIS2_PLACEMENT_3D('',#236147,#236148,#236149); +#236147 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236148 = DIRECTION('',(0.,0.,1.)); +#236149 = DIRECTION('',(1.,0.,-0.)); +#236150 = SHELL_BASED_SURFACE_MODEL('',(#236151)); +#236151 = OPEN_SHELL('',(#236152)); +#236152 = ADVANCED_FACE('',(#236153,#236287),#236346,.T.); +#236153 = FACE_BOUND('',#236154,.F.); +#236154 = EDGE_LOOP('',(#236155,#236166,#236174,#236182,#236190,#236198, + #236206,#236215,#236223,#236231,#236239,#236248,#236256,#236265, + #236273,#236281)); +#236155 = ORIENTED_EDGE('',*,*,#236156,.T.); +#236156 = EDGE_CURVE('',#236157,#236159,#236161,.T.); +#236157 = VERTEX_POINT('',#236158); +#236158 = CARTESIAN_POINT('',(116.908013,-53.062533,1.585)); +#236159 = VERTEX_POINT('',#236160); +#236160 = CARTESIAN_POINT('',(117.188666,-53.01329,1.585)); +#236161 = CIRCLE('',#236162,0.327183487819); +#236162 = AXIS2_PLACEMENT_3D('',#236163,#236164,#236165); +#236163 = CARTESIAN_POINT('',(117.09924076591,-53.32801553472,1.585)); +#236164 = DIRECTION('',(0.,0.,-1.)); +#236165 = DIRECTION('',(-0.584466432542,0.811417888163,0.)); +#236166 = ORIENTED_EDGE('',*,*,#236167,.T.); +#236167 = EDGE_CURVE('',#236159,#236168,#236170,.T.); +#236168 = VERTEX_POINT('',#236169); +#236169 = CARTESIAN_POINT('',(117.291273,-53.068323,1.585)); +#236170 = LINE('',#236171,#236172); +#236171 = CARTESIAN_POINT('',(117.188666,-53.01329,1.585)); +#236172 = VECTOR('',#236173,1.); +#236173 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#236174 = ORIENTED_EDGE('',*,*,#236175,.T.); +#236175 = EDGE_CURVE('',#236168,#236176,#236178,.T.); +#236176 = VERTEX_POINT('',#236177); +#236177 = CARTESIAN_POINT('',(117.346306,-53.128073,1.585)); +#236178 = LINE('',#236179,#236180); +#236179 = CARTESIAN_POINT('',(117.291273,-53.068323,1.585)); +#236180 = VECTOR('',#236181,1.); +#236181 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#236182 = ORIENTED_EDGE('',*,*,#236183,.T.); +#236183 = EDGE_CURVE('',#236176,#236184,#236186,.T.); +#236184 = VERTEX_POINT('',#236185); +#236185 = CARTESIAN_POINT('',(117.393109,-53.2282,1.585)); +#236186 = LINE('',#236187,#236188); +#236187 = CARTESIAN_POINT('',(117.346306,-53.128073,1.585)); +#236188 = VECTOR('',#236189,1.); +#236189 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#236190 = ORIENTED_EDGE('',*,*,#236191,.T.); +#236191 = EDGE_CURVE('',#236184,#236192,#236194,.T.); +#236192 = VERTEX_POINT('',#236193); +#236193 = CARTESIAN_POINT('',(117.396025,-53.246585,1.585)); +#236194 = LINE('',#236195,#236196); +#236195 = CARTESIAN_POINT('',(117.393109,-53.2282,1.585)); +#236196 = VECTOR('',#236197,1.); +#236197 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#236198 = ORIENTED_EDGE('',*,*,#236199,.T.); +#236199 = EDGE_CURVE('',#236192,#236200,#236202,.T.); +#236200 = VERTEX_POINT('',#236201); +#236201 = CARTESIAN_POINT('',(117.722322,-53.018178,1.585)); +#236202 = LINE('',#236203,#236204); +#236203 = CARTESIAN_POINT('',(117.396025,-53.246585,1.585)); +#236204 = VECTOR('',#236205,1.); +#236205 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#236206 = ORIENTED_EDGE('',*,*,#236207,.T.); +#236207 = EDGE_CURVE('',#236200,#236208,#236210,.T.); +#236208 = VERTEX_POINT('',#236209); +#236209 = CARTESIAN_POINT('',(117.796872,-53.124678,1.585)); +#236210 = CIRCLE('',#236211,6.499990865384E-02); +#236211 = AXIS2_PLACEMENT_3D('',#236212,#236213,#236214); +#236212 = CARTESIAN_POINT('',(117.75959707222,-53.07142794944,1.585)); +#236213 = DIRECTION('',(0.,0.,-1.)); +#236214 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#236215 = ORIENTED_EDGE('',*,*,#236216,.T.); +#236216 = EDGE_CURVE('',#236208,#236217,#236219,.T.); +#236217 = VERTEX_POINT('',#236218); +#236218 = CARTESIAN_POINT('',(117.396025,-53.40527,1.585)); +#236219 = LINE('',#236220,#236221); +#236220 = CARTESIAN_POINT('',(117.796872,-53.124678,1.585)); +#236221 = VECTOR('',#236222,1.); +#236222 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#236223 = ORIENTED_EDGE('',*,*,#236224,.T.); +#236224 = EDGE_CURVE('',#236217,#236225,#236227,.T.); +#236225 = VERTEX_POINT('',#236226); +#236226 = CARTESIAN_POINT('',(117.396025,-53.520714,1.585)); +#236227 = LINE('',#236228,#236229); +#236228 = CARTESIAN_POINT('',(117.396025,-53.40527,1.585)); +#236229 = VECTOR('',#236230,1.); +#236230 = DIRECTION('',(0.,-1.,0.)); +#236231 = ORIENTED_EDGE('',*,*,#236232,.T.); +#236232 = EDGE_CURVE('',#236225,#236233,#236235,.T.); +#236233 = VERTEX_POINT('',#236234); +#236234 = CARTESIAN_POINT('',(117.759597,-53.520714,1.585)); +#236235 = LINE('',#236236,#236237); +#236236 = CARTESIAN_POINT('',(117.396025,-53.520714,1.585)); +#236237 = VECTOR('',#236238,1.); +#236238 = DIRECTION('',(1.,0.,0.)); +#236239 = ORIENTED_EDGE('',*,*,#236240,.T.); +#236240 = EDGE_CURVE('',#236233,#236241,#236243,.T.); +#236241 = VERTEX_POINT('',#236242); +#236242 = CARTESIAN_POINT('',(117.759597,-53.650714,1.585)); +#236243 = CIRCLE('',#236244,6.500000000091E-02); +#236244 = AXIS2_PLACEMENT_3D('',#236245,#236246,#236247); +#236245 = CARTESIAN_POINT('',(117.75959665513,-53.585714,1.585)); +#236246 = DIRECTION('',(0.,0.,-1.)); +#236247 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#236248 = ORIENTED_EDGE('',*,*,#236249,.T.); +#236249 = EDGE_CURVE('',#236241,#236250,#236252,.T.); +#236250 = VERTEX_POINT('',#236251); +#236251 = CARTESIAN_POINT('',(116.859597,-53.650714,1.585)); +#236252 = LINE('',#236253,#236254); +#236253 = CARTESIAN_POINT('',(117.759597,-53.650714,1.585)); +#236254 = VECTOR('',#236255,1.); +#236255 = DIRECTION('',(-1.,0.,0.)); +#236256 = ORIENTED_EDGE('',*,*,#236257,.T.); +#236257 = EDGE_CURVE('',#236250,#236258,#236260,.T.); +#236258 = VERTEX_POINT('',#236259); +#236259 = CARTESIAN_POINT('',(116.794597,-53.585714,1.585)); +#236260 = CIRCLE('',#236261,6.500103935389E-02); +#236261 = AXIS2_PLACEMENT_3D('',#236262,#236263,#236264); +#236262 = CARTESIAN_POINT('',(116.85959803934,-53.58571296065,1.585)); +#236263 = DIRECTION('',(0.,0.,-1.)); +#236264 = DIRECTION('',(-1.59896764922E-05,-0.999999999872,-0.)); +#236265 = ORIENTED_EDGE('',*,*,#236266,.T.); +#236266 = EDGE_CURVE('',#236258,#236267,#236269,.T.); +#236267 = VERTEX_POINT('',#236268); +#236268 = CARTESIAN_POINT('',(116.797512,-53.2282,1.585)); +#236269 = LINE('',#236270,#236271); +#236270 = CARTESIAN_POINT('',(116.794597,-53.585714,1.585)); +#236271 = VECTOR('',#236272,1.); +#236272 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#236273 = ORIENTED_EDGE('',*,*,#236274,.T.); +#236274 = EDGE_CURVE('',#236267,#236275,#236277,.T.); +#236275 = VERTEX_POINT('',#236276); +#236276 = CARTESIAN_POINT('',(116.850702,-53.119844,1.585)); +#236277 = LINE('',#236278,#236279); +#236278 = CARTESIAN_POINT('',(116.797512,-53.2282,1.585)); +#236279 = VECTOR('',#236280,1.); +#236280 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#236281 = ORIENTED_EDGE('',*,*,#236282,.T.); +#236282 = EDGE_CURVE('',#236275,#236157,#236283,.T.); +#236283 = LINE('',#236284,#236285); +#236284 = CARTESIAN_POINT('',(116.850702,-53.119844,1.585)); +#236285 = VECTOR('',#236286,1.); +#236286 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236287 = FACE_BOUND('',#236288,.F.); +#236288 = EDGE_LOOP('',(#236289,#236300,#236308,#236316,#236324,#236332, + #236340)); +#236289 = ORIENTED_EDGE('',*,*,#236290,.T.); +#236290 = EDGE_CURVE('',#236291,#236293,#236295,.T.); +#236291 = VERTEX_POINT('',#236292); +#236292 = CARTESIAN_POINT('',(117.206808,-53.167706,1.585)); +#236293 = VERTEX_POINT('',#236294); +#236294 = CARTESIAN_POINT('',(116.955875,-53.195644,1.585)); +#236295 = CIRCLE('',#236296,0.180979134862); +#236296 = AXIS2_PLACEMENT_3D('',#236297,#236298,#236299); +#236297 = CARTESIAN_POINT('',(117.09569076987,-53.31055700078,1.585)); +#236298 = DIRECTION('',(0.,0.,1.)); +#236299 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#236300 = ORIENTED_EDGE('',*,*,#236301,.T.); +#236301 = EDGE_CURVE('',#236293,#236302,#236304,.T.); +#236302 = VERTEX_POINT('',#236303); +#236303 = CARTESIAN_POINT('',(116.924597,-53.258201,1.585)); +#236304 = LINE('',#236305,#236306); +#236305 = CARTESIAN_POINT('',(116.955875,-53.195644,1.585)); +#236306 = VECTOR('',#236307,1.); +#236307 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#236308 = ORIENTED_EDGE('',*,*,#236309,.T.); +#236309 = EDGE_CURVE('',#236302,#236310,#236312,.T.); +#236310 = VERTEX_POINT('',#236311); +#236311 = CARTESIAN_POINT('',(116.924597,-53.520714,1.585)); +#236312 = LINE('',#236313,#236314); +#236313 = CARTESIAN_POINT('',(116.924597,-53.258201,1.585)); +#236314 = VECTOR('',#236315,1.); +#236315 = DIRECTION('',(0.,-1.,0.)); +#236316 = ORIENTED_EDGE('',*,*,#236317,.T.); +#236317 = EDGE_CURVE('',#236310,#236318,#236320,.T.); +#236318 = VERTEX_POINT('',#236319); +#236319 = CARTESIAN_POINT('',(117.266025,-53.520714,1.585)); +#236320 = LINE('',#236321,#236322); +#236321 = CARTESIAN_POINT('',(116.924597,-53.520714,1.585)); +#236322 = VECTOR('',#236323,1.); +#236323 = DIRECTION('',(1.,0.,0.)); +#236324 = ORIENTED_EDGE('',*,*,#236325,.T.); +#236325 = EDGE_CURVE('',#236318,#236326,#236328,.T.); +#236326 = VERTEX_POINT('',#236327); +#236327 = CARTESIAN_POINT('',(117.266025,-53.258201,1.585)); +#236328 = LINE('',#236329,#236330); +#236329 = CARTESIAN_POINT('',(117.266025,-53.520714,1.585)); +#236330 = VECTOR('',#236331,1.); +#236331 = DIRECTION('',(0.,1.,0.)); +#236332 = ORIENTED_EDGE('',*,*,#236333,.T.); +#236333 = EDGE_CURVE('',#236326,#236334,#236336,.T.); +#236334 = VERTEX_POINT('',#236335); +#236335 = CARTESIAN_POINT('',(117.234746,-53.195644,1.585)); +#236336 = LINE('',#236337,#236338); +#236337 = CARTESIAN_POINT('',(117.266025,-53.258201,1.585)); +#236338 = VECTOR('',#236339,1.); +#236339 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#236340 = ORIENTED_EDGE('',*,*,#236341,.T.); +#236341 = EDGE_CURVE('',#236334,#236291,#236342,.T.); +#236342 = LINE('',#236343,#236344); +#236343 = CARTESIAN_POINT('',(117.234746,-53.195644,1.585)); +#236344 = VECTOR('',#236345,1.); +#236345 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#236346 = PLANE('',#236347); +#236347 = AXIS2_PLACEMENT_3D('',#236348,#236349,#236350); +#236348 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236349 = DIRECTION('',(0.,0.,1.)); +#236350 = DIRECTION('',(1.,0.,-0.)); +#236351 = SHELL_BASED_SURFACE_MODEL('',(#236352)); +#236352 = OPEN_SHELL('',(#236353)); +#236353 = ADVANCED_FACE('',(#236354),#236398,.T.); +#236354 = FACE_BOUND('',#236355,.F.); +#236355 = EDGE_LOOP('',(#236356,#236367,#236375,#236384,#236392)); +#236356 = ORIENTED_EDGE('',*,*,#236357,.T.); +#236357 = EDGE_CURVE('',#236358,#236360,#236362,.T.); +#236358 = VERTEX_POINT('',#236359); +#236359 = CARTESIAN_POINT('',(127.556688,-52.86084,1.585)); +#236360 = VERTEX_POINT('',#236361); +#236361 = CARTESIAN_POINT('',(127.68174,-52.885714,1.585)); +#236362 = CIRCLE('',#236363,6.499988811648E-02); +#236363 = AXIS2_PLACEMENT_3D('',#236364,#236365,#236366); +#236364 = CARTESIAN_POINT('',(127.61674011188,-52.8857142701,1.585)); +#236365 = DIRECTION('',(0.,0.,-1.)); +#236366 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#236367 = ORIENTED_EDGE('',*,*,#236368,.T.); +#236368 = EDGE_CURVE('',#236360,#236369,#236371,.T.); +#236369 = VERTEX_POINT('',#236370); +#236370 = CARTESIAN_POINT('',(127.68174,-53.571428,1.585)); +#236371 = LINE('',#236372,#236373); +#236372 = CARTESIAN_POINT('',(127.68174,-52.885714,1.585)); +#236373 = VECTOR('',#236374,1.); +#236374 = DIRECTION('',(0.,-1.,0.)); +#236375 = ORIENTED_EDGE('',*,*,#236376,.T.); +#236376 = EDGE_CURVE('',#236369,#236377,#236379,.T.); +#236377 = VERTEX_POINT('',#236378); +#236378 = CARTESIAN_POINT('',(127.55174,-53.571428,1.585)); +#236379 = CIRCLE('',#236380,6.500000000092E-02); +#236380 = AXIS2_PLACEMENT_3D('',#236381,#236382,#236383); +#236381 = CARTESIAN_POINT('',(127.61674,-53.57142765513,1.585)); +#236382 = DIRECTION('',(-0.,0.,-1.)); +#236383 = DIRECTION('',(0.999999999986,-5.305658025668E-06,-0.)); +#236384 = ORIENTED_EDGE('',*,*,#236385,.T.); +#236385 = EDGE_CURVE('',#236377,#236386,#236388,.T.); +#236386 = VERTEX_POINT('',#236387); +#236387 = CARTESIAN_POINT('',(127.55174,-52.885714,1.585)); +#236388 = LINE('',#236389,#236390); +#236389 = CARTESIAN_POINT('',(127.55174,-53.571428,1.585)); +#236390 = VECTOR('',#236391,1.); +#236391 = DIRECTION('',(0.,1.,0.)); +#236392 = ORIENTED_EDGE('',*,*,#236393,.T.); +#236393 = EDGE_CURVE('',#236386,#236358,#236394,.T.); +#236394 = LINE('',#236395,#236396); +#236395 = CARTESIAN_POINT('',(127.55174,-52.885714,1.585)); +#236396 = VECTOR('',#236397,1.); +#236397 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#236398 = PLANE('',#236399); +#236399 = AXIS2_PLACEMENT_3D('',#236400,#236401,#236402); +#236400 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236401 = DIRECTION('',(0.,0.,1.)); +#236402 = DIRECTION('',(1.,0.,-0.)); +#236403 = SHELL_BASED_SURFACE_MODEL('',(#236404)); +#236404 = OPEN_SHELL('',(#236405)); +#236405 = ADVANCED_FACE('',(#236406,#236475),#236501,.T.); +#236406 = FACE_BOUND('',#236407,.F.); +#236407 = EDGE_LOOP('',(#236408,#236419,#236427,#236436,#236444,#236452, + #236460,#236469)); +#236408 = ORIENTED_EDGE('',*,*,#236409,.T.); +#236409 = EDGE_CURVE('',#236410,#236412,#236414,.T.); +#236410 = VERTEX_POINT('',#236411); +#236411 = CARTESIAN_POINT('',(147.319042,-53.283092,1.585)); +#236412 = VERTEX_POINT('',#236413); +#236413 = CARTESIAN_POINT('',(147.319042,-53.159764,1.585)); +#236414 = CIRCLE('',#236415,6.499975994821E-02); +#236415 = AXIS2_PLACEMENT_3D('',#236416,#236417,#236418); +#236416 = CARTESIAN_POINT('',(147.33959728879,-53.221428,1.585)); +#236417 = DIRECTION('',(0.,0.,-1.)); +#236418 = DIRECTION('',(-0.316236380079,-0.948680426653,-0.)); +#236419 = ORIENTED_EDGE('',*,*,#236420,.T.); +#236420 = EDGE_CURVE('',#236412,#236421,#236423,.T.); +#236421 = VERTEX_POINT('',#236422); +#236422 = CARTESIAN_POINT('',(148.219042,-52.859764,1.585)); +#236423 = LINE('',#236424,#236425); +#236424 = CARTESIAN_POINT('',(147.319042,-53.159764,1.585)); +#236425 = VECTOR('',#236426,1.); +#236426 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#236427 = ORIENTED_EDGE('',*,*,#236428,.T.); +#236428 = EDGE_CURVE('',#236421,#236429,#236431,.T.); +#236429 = VERTEX_POINT('',#236430); +#236430 = CARTESIAN_POINT('',(148.260152,-52.983093,1.585)); +#236431 = CIRCLE('',#236432,6.500014296397E-02); +#236432 = AXIS2_PLACEMENT_3D('',#236433,#236434,#236435); +#236433 = CARTESIAN_POINT('',(148.23959672008,-52.9214285933,1.585)); +#236434 = DIRECTION('',(0.,0.,-1.)); +#236435 = DIRECTION('',(-0.316225767373,0.948683964263,-0.)); +#236436 = ORIENTED_EDGE('',*,*,#236437,.T.); +#236437 = EDGE_CURVE('',#236429,#236438,#236440,.T.); +#236438 = VERTEX_POINT('',#236439); +#236439 = CARTESIAN_POINT('',(148.047454,-53.053992,1.585)); +#236440 = LINE('',#236441,#236442); +#236441 = CARTESIAN_POINT('',(148.260152,-52.983093,1.585)); +#236442 = VECTOR('',#236443,1.); +#236443 = DIRECTION('',(-0.948683744073,-0.316226427945,0.)); +#236444 = ORIENTED_EDGE('',*,*,#236445,.T.); +#236445 = EDGE_CURVE('',#236438,#236446,#236448,.T.); +#236446 = VERTEX_POINT('',#236447); +#236447 = CARTESIAN_POINT('',(148.047454,-53.388863,1.585)); +#236448 = LINE('',#236449,#236450); +#236449 = CARTESIAN_POINT('',(148.047454,-53.053992,1.585)); +#236450 = VECTOR('',#236451,1.); +#236451 = DIRECTION('',(0.,-1.,0.)); +#236452 = ORIENTED_EDGE('',*,*,#236453,.T.); +#236453 = EDGE_CURVE('',#236446,#236454,#236456,.T.); +#236454 = VERTEX_POINT('',#236455); +#236455 = CARTESIAN_POINT('',(148.260152,-53.459763,1.585)); +#236456 = LINE('',#236457,#236458); +#236457 = CARTESIAN_POINT('',(148.047454,-53.388863,1.585)); +#236458 = VECTOR('',#236459,1.); +#236459 = DIRECTION('',(0.948682406,-0.316230442155,0.)); +#236460 = ORIENTED_EDGE('',*,*,#236461,.T.); +#236461 = EDGE_CURVE('',#236454,#236462,#236464,.T.); +#236462 = VERTEX_POINT('',#236463); +#236463 = CARTESIAN_POINT('',(148.219042,-53.583092,1.585)); +#236464 = CIRCLE('',#236465,6.500014296695E-02); +#236465 = AXIS2_PLACEMENT_3D('',#236466,#236467,#236468); +#236466 = CARTESIAN_POINT('',(148.23959634729,-53.52142728242,1.585)); +#236467 = DIRECTION('',(0.,0.,-1.)); +#236468 = DIRECTION('',(0.316240115321,0.948679181526,0.)); +#236469 = ORIENTED_EDGE('',*,*,#236470,.T.); +#236470 = EDGE_CURVE('',#236462,#236410,#236471,.T.); +#236471 = LINE('',#236472,#236473); +#236472 = CARTESIAN_POINT('',(148.219042,-53.583092,1.585)); +#236473 = VECTOR('',#236474,1.); +#236474 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#236475 = FACE_BOUND('',#236476,.F.); +#236476 = EDGE_LOOP('',(#236477,#236487,#236495)); +#236477 = ORIENTED_EDGE('',*,*,#236478,.T.); +#236478 = EDGE_CURVE('',#236479,#236481,#236483,.T.); +#236479 = VERTEX_POINT('',#236480); +#236480 = CARTESIAN_POINT('',(147.545144,-53.221428,1.585)); +#236481 = VERTEX_POINT('',#236482); +#236482 = CARTESIAN_POINT('',(147.917454,-53.34553,1.585)); +#236483 = LINE('',#236484,#236485); +#236484 = CARTESIAN_POINT('',(147.545144,-53.221428,1.585)); +#236485 = VECTOR('',#236486,1.); +#236486 = DIRECTION('',(0.948684317287,-0.316224708291,0.)); +#236487 = ORIENTED_EDGE('',*,*,#236488,.T.); +#236488 = EDGE_CURVE('',#236481,#236489,#236491,.T.); +#236489 = VERTEX_POINT('',#236490); +#236490 = CARTESIAN_POINT('',(147.917454,-53.097325,1.585)); +#236491 = LINE('',#236492,#236493); +#236492 = CARTESIAN_POINT('',(147.917454,-53.34553,1.585)); +#236493 = VECTOR('',#236494,1.); +#236494 = DIRECTION('',(0.,1.,0.)); +#236495 = ORIENTED_EDGE('',*,*,#236496,.T.); +#236496 = EDGE_CURVE('',#236489,#236479,#236497,.T.); +#236497 = LINE('',#236498,#236499); +#236498 = CARTESIAN_POINT('',(147.917454,-53.097325,1.585)); +#236499 = VECTOR('',#236500,1.); +#236500 = DIRECTION('',(-0.94868355286,-0.316227001586,0.)); +#236501 = PLANE('',#236502); +#236502 = AXIS2_PLACEMENT_3D('',#236503,#236504,#236505); +#236503 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236504 = DIRECTION('',(0.,0.,1.)); +#236505 = DIRECTION('',(1.,0.,-0.)); +#236506 = SHELL_BASED_SURFACE_MODEL('',(#236507)); +#236507 = OPEN_SHELL('',(#236508)); +#236508 = ADVANCED_FACE('',(#236509),#236586,.T.); +#236509 = FACE_BOUND('',#236510,.F.); +#236510 = EDGE_LOOP('',(#236511,#236522,#236530,#236538,#236547,#236555, + #236564,#236572,#236580)); +#236511 = ORIENTED_EDGE('',*,*,#236512,.T.); +#236512 = EDGE_CURVE('',#236513,#236515,#236517,.T.); +#236513 = VERTEX_POINT('',#236514); +#236514 = CARTESIAN_POINT('',(186.607125,-52.415559,1.585)); +#236515 = VERTEX_POINT('',#236516); +#236516 = CARTESIAN_POINT('',(186.723793,-52.477919,1.585)); +#236517 = CIRCLE('',#236518,7.500000000003E-02); +#236518 = AXIS2_PLACEMENT_3D('',#236519,#236520,#236521); +#236519 = CARTESIAN_POINT('',(186.648793,-52.47791906555,1.585)); +#236520 = DIRECTION('',(0.,0.,-1.)); +#236521 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#236522 = ORIENTED_EDGE('',*,*,#236523,.T.); +#236523 = EDGE_CURVE('',#236515,#236524,#236526,.T.); +#236524 = VERTEX_POINT('',#236525); +#236525 = CARTESIAN_POINT('',(186.723793,-53.402919,1.585)); +#236526 = LINE('',#236527,#236528); +#236527 = CARTESIAN_POINT('',(186.723793,-52.477919,1.585)); +#236528 = VECTOR('',#236529,1.); +#236529 = DIRECTION('',(0.,-1.,0.)); +#236530 = ORIENTED_EDGE('',*,*,#236531,.T.); +#236531 = EDGE_CURVE('',#236524,#236532,#236534,.T.); +#236532 = VERTEX_POINT('',#236533); +#236533 = CARTESIAN_POINT('',(187.139615,-53.40436,1.585)); +#236534 = LINE('',#236535,#236536); +#236535 = CARTESIAN_POINT('',(186.723793,-53.402919,1.585)); +#236536 = VECTOR('',#236537,1.); +#236537 = DIRECTION('',(0.999993995468,-3.465404301528E-03,0.)); +#236538 = ORIENTED_EDGE('',*,*,#236539,.T.); +#236539 = EDGE_CURVE('',#236532,#236540,#236542,.T.); +#236540 = VERTEX_POINT('',#236541); +#236541 = CARTESIAN_POINT('',(187.124983,-53.552919,1.585)); +#236542 = CIRCLE('',#236543,7.500006711464E-02); +#236543 = AXIS2_PLACEMENT_3D('',#236544,#236545,#236546); +#236544 = CARTESIAN_POINT('',(187.12498306711,-53.47791893288,1.585)); +#236545 = DIRECTION('',(0.,0.,-1.)); +#236546 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#236547 = ORIENTED_EDGE('',*,*,#236548,.T.); +#236548 = EDGE_CURVE('',#236540,#236549,#236551,.T.); +#236549 = VERTEX_POINT('',#236550); +#236550 = CARTESIAN_POINT('',(186.634161,-53.551478,1.585)); +#236551 = LINE('',#236552,#236553); +#236552 = CARTESIAN_POINT('',(187.124983,-53.552919,1.585)); +#236553 = VECTOR('',#236554,1.); +#236554 = DIRECTION('',(-0.999995690299,2.935878566407E-03,0.)); +#236555 = ORIENTED_EDGE('',*,*,#236556,.T.); +#236556 = EDGE_CURVE('',#236549,#236557,#236559,.T.); +#236557 = VERTEX_POINT('',#236558); +#236558 = CARTESIAN_POINT('',(186.573793,-53.477919,1.585)); +#236559 = CIRCLE('',#236560,7.500074938986E-02); +#236560 = AXIS2_PLACEMENT_3D('',#236561,#236562,#236563); +#236561 = CARTESIAN_POINT('',(186.64879374938,-53.47791853389,1.585)); +#236562 = DIRECTION('',(0.,0.,-1.)); +#236563 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#236564 = ORIENTED_EDGE('',*,*,#236565,.T.); +#236565 = EDGE_CURVE('',#236557,#236566,#236568,.T.); +#236566 = VERTEX_POINT('',#236567); +#236567 = CARTESIAN_POINT('',(186.575234,-52.463287,1.585)); +#236568 = LINE('',#236569,#236570); +#236569 = CARTESIAN_POINT('',(186.573793,-53.477919,1.585)); +#236570 = VECTOR('',#236571,1.); +#236571 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#236572 = ORIENTED_EDGE('',*,*,#236573,.T.); +#236573 = EDGE_CURVE('',#236566,#236574,#236576,.T.); +#236574 = VERTEX_POINT('',#236575); +#236575 = CARTESIAN_POINT('',(186.586433,-52.436251,1.585)); +#236576 = LINE('',#236577,#236578); +#236577 = CARTESIAN_POINT('',(186.575234,-52.463287,1.585)); +#236578 = VECTOR('',#236579,1.); +#236579 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#236580 = ORIENTED_EDGE('',*,*,#236581,.T.); +#236581 = EDGE_CURVE('',#236574,#236513,#236582,.T.); +#236582 = LINE('',#236583,#236584); +#236583 = CARTESIAN_POINT('',(186.586433,-52.436251,1.585)); +#236584 = VECTOR('',#236585,1.); +#236585 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236586 = PLANE('',#236587); +#236587 = AXIS2_PLACEMENT_3D('',#236588,#236589,#236590); +#236588 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236589 = DIRECTION('',(0.,0.,1.)); +#236590 = DIRECTION('',(1.,0.,-0.)); +#236591 = SHELL_BASED_SURFACE_MODEL('',(#236592)); +#236592 = OPEN_SHELL('',(#236593)); +#236593 = ADVANCED_FACE('',(#236594),#236753,.T.); +#236594 = FACE_BOUND('',#236595,.F.); +#236595 = EDGE_LOOP('',(#236596,#236607,#236615,#236623,#236631,#236639, + #236647,#236655,#236664,#236672,#236681,#236689,#236697,#236705, + #236714,#236722,#236730,#236738,#236747)); +#236596 = ORIENTED_EDGE('',*,*,#236597,.T.); +#236597 = EDGE_CURVE('',#236598,#236600,#236602,.T.); +#236598 = VERTEX_POINT('',#236599); +#236599 = CARTESIAN_POINT('',(187.424776,-52.458456,1.585)); +#236600 = VERTEX_POINT('',#236601); +#236601 = CARTESIAN_POINT('',(187.934171,-52.467786,1.585)); +#236602 = CIRCLE('',#236603,0.450326844012); +#236603 = AXIS2_PLACEMENT_3D('',#236604,#236605,#236606); +#236604 = CARTESIAN_POINT('',(187.6726730301,-52.83440989199,1.585)); +#236605 = DIRECTION('',(0.,0.,-1.)); +#236606 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#236607 = ORIENTED_EDGE('',*,*,#236608,.T.); +#236608 = EDGE_CURVE('',#236600,#236609,#236611,.T.); +#236609 = VERTEX_POINT('',#236610); +#236610 = CARTESIAN_POINT('',(187.997624,-52.533316,1.585)); +#236611 = LINE('',#236612,#236613); +#236612 = CARTESIAN_POINT('',(187.934171,-52.467786,1.585)); +#236613 = VECTOR('',#236614,1.); +#236614 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#236615 = ORIENTED_EDGE('',*,*,#236616,.T.); +#236616 = EDGE_CURVE('',#236609,#236617,#236619,.T.); +#236617 = VERTEX_POINT('',#236618); +#236618 = CARTESIAN_POINT('',(188.055685,-52.653763,1.585)); +#236619 = LINE('',#236620,#236621); +#236620 = CARTESIAN_POINT('',(187.997624,-52.533316,1.585)); +#236621 = VECTOR('',#236622,1.); +#236622 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#236623 = ORIENTED_EDGE('',*,*,#236624,.T.); +#236624 = EDGE_CURVE('',#236617,#236625,#236627,.T.); +#236625 = VERTEX_POINT('',#236626); +#236626 = CARTESIAN_POINT('',(188.054926,-52.780095,1.585)); +#236627 = LINE('',#236628,#236629); +#236628 = CARTESIAN_POINT('',(188.055685,-52.653763,1.585)); +#236629 = VECTOR('',#236630,1.); +#236630 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#236631 = ORIENTED_EDGE('',*,*,#236632,.T.); +#236632 = EDGE_CURVE('',#236625,#236633,#236635,.T.); +#236633 = VERTEX_POINT('',#236634); +#236634 = CARTESIAN_POINT('',(187.996868,-52.948158,1.585)); +#236635 = LINE('',#236636,#236637); +#236636 = CARTESIAN_POINT('',(188.054926,-52.780095,1.585)); +#236637 = VECTOR('',#236638,1.); +#236638 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#236639 = ORIENTED_EDGE('',*,*,#236640,.T.); +#236640 = EDGE_CURVE('',#236633,#236641,#236643,.T.); +#236641 = VERTEX_POINT('',#236642); +#236642 = CARTESIAN_POINT('',(187.544145,-53.402919,1.585)); +#236643 = LINE('',#236644,#236645); +#236644 = CARTESIAN_POINT('',(187.996868,-52.948158,1.585)); +#236645 = VECTOR('',#236646,1.); +#236646 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#236647 = ORIENTED_EDGE('',*,*,#236648,.T.); +#236648 = EDGE_CURVE('',#236641,#236649,#236651,.T.); +#236649 = VERTEX_POINT('',#236650); +#236650 = CARTESIAN_POINT('',(187.996758,-53.40436,1.585)); +#236651 = LINE('',#236652,#236653); +#236652 = CARTESIAN_POINT('',(187.544145,-53.402919,1.585)); +#236653 = VECTOR('',#236654,1.); +#236654 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#236655 = ORIENTED_EDGE('',*,*,#236656,.T.); +#236656 = EDGE_CURVE('',#236649,#236657,#236659,.T.); +#236657 = VERTEX_POINT('',#236658); +#236658 = CARTESIAN_POINT('',(187.982126,-53.552919,1.585)); +#236659 = CIRCLE('',#236660,7.500006711464E-02); +#236660 = AXIS2_PLACEMENT_3D('',#236661,#236662,#236663); +#236661 = CARTESIAN_POINT('',(187.98212606711,-53.47791893288,1.585)); +#236662 = DIRECTION('',(0.,0.,-1.)); +#236663 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#236664 = ORIENTED_EDGE('',*,*,#236665,.T.); +#236665 = EDGE_CURVE('',#236657,#236666,#236668,.T.); +#236666 = VERTEX_POINT('',#236667); +#236667 = CARTESIAN_POINT('',(187.348447,-53.551478,1.585)); +#236668 = LINE('',#236669,#236670); +#236669 = CARTESIAN_POINT('',(187.982126,-53.552919,1.585)); +#236670 = VECTOR('',#236671,1.); +#236671 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#236672 = ORIENTED_EDGE('',*,*,#236673,.T.); +#236673 = EDGE_CURVE('',#236666,#236674,#236676,.T.); +#236674 = VERTEX_POINT('',#236675); +#236675 = CARTESIAN_POINT('',(187.310046,-53.424886,1.585)); +#236676 = CIRCLE('',#236677,7.500021013109E-02); +#236677 = AXIS2_PLACEMENT_3D('',#236678,#236679,#236680); +#236678 = CARTESIAN_POINT('',(187.3630793167,-53.47791899764,1.585)); +#236679 = DIRECTION('',(0.,0.,-1.)); +#236680 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#236681 = ORIENTED_EDGE('',*,*,#236682,.T.); +#236682 = EDGE_CURVE('',#236674,#236683,#236685,.T.); +#236683 = VERTEX_POINT('',#236684); +#236684 = CARTESIAN_POINT('',(187.868954,-52.865976,1.585)); +#236685 = LINE('',#236686,#236687); +#236686 = CARTESIAN_POINT('',(187.310046,-53.424886,1.585)); +#236687 = VECTOR('',#236688,1.); +#236688 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#236689 = ORIENTED_EDGE('',*,*,#236690,.T.); +#236690 = EDGE_CURVE('',#236683,#236691,#236693,.T.); +#236691 = VERTEX_POINT('',#236692); +#236692 = CARTESIAN_POINT('',(187.907126,-52.751463,1.585)); +#236693 = LINE('',#236694,#236695); +#236694 = CARTESIAN_POINT('',(187.868954,-52.865976,1.585)); +#236695 = VECTOR('',#236696,1.); +#236696 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#236697 = ORIENTED_EDGE('',*,*,#236698,.T.); +#236698 = EDGE_CURVE('',#236691,#236699,#236701,.T.); +#236699 = VERTEX_POINT('',#236700); +#236700 = CARTESIAN_POINT('',(187.907126,-52.6861,1.585)); +#236701 = LINE('',#236702,#236703); +#236702 = CARTESIAN_POINT('',(187.907126,-52.751463,1.585)); +#236703 = VECTOR('',#236704,1.); +#236704 = DIRECTION('',(0.,1.,0.)); +#236705 = ORIENTED_EDGE('',*,*,#236706,.T.); +#236706 = EDGE_CURVE('',#236699,#236707,#236709,.T.); +#236707 = VERTEX_POINT('',#236708); +#236708 = CARTESIAN_POINT('',(187.773945,-52.552919,1.585)); +#236709 = CIRCLE('',#236710,0.18686440374); +#236710 = AXIS2_PLACEMENT_3D('',#236711,#236712,#236713); +#236711 = CARTESIAN_POINT('',(187.726409,-52.733636,1.585)); +#236712 = DIRECTION('',(0.,0.,1.)); +#236713 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#236714 = ORIENTED_EDGE('',*,*,#236715,.T.); +#236715 = EDGE_CURVE('',#236707,#236716,#236718,.T.); +#236716 = VERTEX_POINT('',#236717); +#236717 = CARTESIAN_POINT('',(187.57126,-52.552919,1.585)); +#236718 = LINE('',#236719,#236720); +#236719 = CARTESIAN_POINT('',(187.773945,-52.552919,1.585)); +#236720 = VECTOR('',#236721,1.); +#236721 = DIRECTION('',(-1.,0.,0.)); +#236722 = ORIENTED_EDGE('',*,*,#236723,.T.); +#236723 = EDGE_CURVE('',#236716,#236724,#236726,.T.); +#236724 = VERTEX_POINT('',#236725); +#236725 = CARTESIAN_POINT('',(187.502744,-52.587177,1.585)); +#236726 = LINE('',#236727,#236728); +#236727 = CARTESIAN_POINT('',(187.57126,-52.552919,1.585)); +#236728 = VECTOR('',#236729,1.); +#236729 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#236730 = ORIENTED_EDGE('',*,*,#236731,.T.); +#236731 = EDGE_CURVE('',#236724,#236732,#236734,.T.); +#236732 = VERTEX_POINT('',#236733); +#236733 = CARTESIAN_POINT('',(187.452366,-52.635517,1.585)); +#236734 = LINE('',#236735,#236736); +#236735 = CARTESIAN_POINT('',(187.502744,-52.587177,1.585)); +#236736 = VECTOR('',#236737,1.); +#236737 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#236738 = ORIENTED_EDGE('',*,*,#236739,.T.); +#236739 = EDGE_CURVE('',#236732,#236740,#236742,.T.); +#236740 = VERTEX_POINT('',#236741); +#236741 = CARTESIAN_POINT('',(187.357665,-52.520124,1.585)); +#236742 = CIRCLE('',#236743,7.499996838528E-02); +#236743 = AXIS2_PLACEMENT_3D('',#236744,#236745,#236746); +#236744 = CARTESIAN_POINT('',(187.410698,-52.57315697246,1.585)); +#236745 = DIRECTION('',(0.,0.,-1.)); +#236746 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#236747 = ORIENTED_EDGE('',*,*,#236748,.T.); +#236748 = EDGE_CURVE('',#236740,#236598,#236749,.T.); +#236749 = LINE('',#236750,#236751); +#236750 = CARTESIAN_POINT('',(187.357665,-52.520124,1.585)); +#236751 = VECTOR('',#236752,1.); +#236752 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#236753 = PLANE('',#236754); +#236754 = AXIS2_PLACEMENT_3D('',#236755,#236756,#236757); +#236755 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236756 = DIRECTION('',(0.,0.,1.)); +#236757 = DIRECTION('',(1.,0.,-0.)); +#236758 = SHELL_BASED_SURFACE_MODEL('',(#236759)); +#236759 = OPEN_SHELL('',(#236760)); +#236760 = ADVANCED_FACE('',(#236761),#236847,.T.); +#236761 = FACE_BOUND('',#236762,.F.); +#236762 = EDGE_LOOP('',(#236763,#236774,#236782,#236791,#236799,#236807, + #236816,#236824,#236833,#236841)); +#236763 = ORIENTED_EDGE('',*,*,#236764,.T.); +#236764 = EDGE_CURVE('',#236765,#236767,#236769,.T.); +#236765 = VERTEX_POINT('',#236766); +#236766 = CARTESIAN_POINT('',(132.099597,-52.643571,1.585)); +#236767 = VERTEX_POINT('',#236768); +#236768 = CARTESIAN_POINT('',(132.099597,-52.513571,1.585)); +#236769 = CIRCLE('',#236770,6.500000000092E-02); +#236770 = AXIS2_PLACEMENT_3D('',#236771,#236772,#236773); +#236771 = CARTESIAN_POINT('',(132.09959734486,-52.578571,1.585)); +#236772 = DIRECTION('',(0.,0.,-1.)); +#236773 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#236774 = ORIENTED_EDGE('',*,*,#236775,.T.); +#236775 = EDGE_CURVE('',#236767,#236776,#236778,.T.); +#236776 = VERTEX_POINT('',#236777); +#236777 = CARTESIAN_POINT('',(132.999597,-52.513571,1.585)); +#236778 = LINE('',#236779,#236780); +#236779 = CARTESIAN_POINT('',(132.099597,-52.513571,1.585)); +#236780 = VECTOR('',#236781,1.); +#236781 = DIRECTION('',(1.,0.,0.)); +#236782 = ORIENTED_EDGE('',*,*,#236783,.T.); +#236783 = EDGE_CURVE('',#236776,#236784,#236786,.T.); +#236784 = VERTEX_POINT('',#236785); +#236785 = CARTESIAN_POINT('',(133.031846,-52.635007,1.585)); +#236786 = CIRCLE('',#236787,6.50002119414E-02); +#236787 = AXIS2_PLACEMENT_3D('',#236788,#236789,#236790); +#236788 = CARTESIAN_POINT('',(132.99959651351,-52.57857121194,1.585)); +#236789 = DIRECTION('',(0.,0.,-1.)); +#236790 = DIRECTION('',(7.484331678206E-06,0.999999999972,0.)); +#236791 = ORIENTED_EDGE('',*,*,#236792,.T.); +#236792 = EDGE_CURVE('',#236784,#236793,#236795,.T.); +#236793 = VERTEX_POINT('',#236794); +#236794 = CARTESIAN_POINT('',(132.344359,-53.027857,1.585)); +#236795 = LINE('',#236796,#236797); +#236796 = CARTESIAN_POINT('',(133.031846,-52.635007,1.585)); +#236797 = VECTOR('',#236798,1.); +#236798 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#236799 = ORIENTED_EDGE('',*,*,#236800,.T.); +#236800 = EDGE_CURVE('',#236793,#236801,#236803,.T.); +#236801 = VERTEX_POINT('',#236802); +#236802 = CARTESIAN_POINT('',(132.999597,-53.027857,1.585)); +#236803 = LINE('',#236804,#236805); +#236804 = CARTESIAN_POINT('',(132.344359,-53.027857,1.585)); +#236805 = VECTOR('',#236806,1.); +#236806 = DIRECTION('',(1.,0.,0.)); +#236807 = ORIENTED_EDGE('',*,*,#236808,.T.); +#236808 = EDGE_CURVE('',#236801,#236809,#236811,.T.); +#236809 = VERTEX_POINT('',#236810); +#236810 = CARTESIAN_POINT('',(132.999597,-53.157857,1.585)); +#236811 = CIRCLE('',#236812,6.500000000091E-02); +#236812 = AXIS2_PLACEMENT_3D('',#236813,#236814,#236815); +#236813 = CARTESIAN_POINT('',(132.99959665513,-53.092857,1.585)); +#236814 = DIRECTION('',(0.,0.,-1.)); +#236815 = DIRECTION('',(5.305657588411E-06,0.999999999986,0.)); +#236816 = ORIENTED_EDGE('',*,*,#236817,.T.); +#236817 = EDGE_CURVE('',#236809,#236818,#236820,.T.); +#236818 = VERTEX_POINT('',#236819); +#236819 = CARTESIAN_POINT('',(132.099597,-53.157857,1.585)); +#236820 = LINE('',#236821,#236822); +#236821 = CARTESIAN_POINT('',(132.999597,-53.157857,1.585)); +#236822 = VECTOR('',#236823,1.); +#236823 = DIRECTION('',(-1.,0.,0.)); +#236824 = ORIENTED_EDGE('',*,*,#236825,.T.); +#236825 = EDGE_CURVE('',#236818,#236826,#236828,.T.); +#236826 = VERTEX_POINT('',#236827); +#236827 = CARTESIAN_POINT('',(132.067348,-53.036421,1.585)); +#236828 = CIRCLE('',#236829,6.500021194141E-02); +#236829 = AXIS2_PLACEMENT_3D('',#236830,#236831,#236832); +#236830 = CARTESIAN_POINT('',(132.09959748648,-53.09285678806,1.585)); +#236831 = DIRECTION('',(0.,0.,-1.)); +#236832 = DIRECTION('',(-7.484332552719E-06,-0.999999999972,-0.)); +#236833 = ORIENTED_EDGE('',*,*,#236834,.T.); +#236834 = EDGE_CURVE('',#236826,#236835,#236837,.T.); +#236835 = VERTEX_POINT('',#236836); +#236836 = CARTESIAN_POINT('',(132.754835,-52.643571,1.585)); +#236837 = LINE('',#236838,#236839); +#236838 = CARTESIAN_POINT('',(132.067348,-53.036421,1.585)); +#236839 = VECTOR('',#236840,1.); +#236840 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#236841 = ORIENTED_EDGE('',*,*,#236842,.T.); +#236842 = EDGE_CURVE('',#236835,#236765,#236843,.T.); +#236843 = LINE('',#236844,#236845); +#236844 = CARTESIAN_POINT('',(132.754835,-52.643571,1.585)); +#236845 = VECTOR('',#236846,1.); +#236846 = DIRECTION('',(-1.,0.,0.)); +#236847 = PLANE('',#236848); +#236848 = AXIS2_PLACEMENT_3D('',#236849,#236850,#236851); +#236849 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236850 = DIRECTION('',(0.,0.,1.)); +#236851 = DIRECTION('',(1.,0.,-0.)); +#236852 = SHELL_BASED_SURFACE_MODEL('',(#236853)); +#236853 = OPEN_SHELL('',(#236854)); +#236854 = ADVANCED_FACE('',(#236855),#236982,.T.); +#236855 = FACE_BOUND('',#236856,.F.); +#236856 = EDGE_LOOP('',(#236857,#236868,#236876,#236884,#236892,#236901, + #236909,#236917,#236925,#236934,#236942,#236951,#236959,#236968, + #236976)); +#236857 = ORIENTED_EDGE('',*,*,#236858,.T.); +#236858 = EDGE_CURVE('',#236859,#236861,#236863,.T.); +#236859 = VERTEX_POINT('',#236860); +#236860 = CARTESIAN_POINT('',(139.649545,-52.617982,1.585)); +#236861 = VERTEX_POINT('',#236862); +#236862 = CARTESIAN_POINT('',(139.774597,-52.642856,1.585)); +#236863 = CIRCLE('',#236864,6.499988811649E-02); +#236864 = AXIS2_PLACEMENT_3D('',#236865,#236866,#236867); +#236865 = CARTESIAN_POINT('',(139.70959711188,-52.6428562701,1.585)); +#236866 = DIRECTION('',(0.,0.,-1.)); +#236867 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#236868 = ORIENTED_EDGE('',*,*,#236869,.T.); +#236869 = EDGE_CURVE('',#236861,#236870,#236872,.T.); +#236870 = VERTEX_POINT('',#236871); +#236871 = CARTESIAN_POINT('',(139.774597,-53.006428,1.585)); +#236872 = LINE('',#236873,#236874); +#236873 = CARTESIAN_POINT('',(139.774597,-52.642856,1.585)); +#236874 = VECTOR('',#236875,1.); +#236875 = DIRECTION('',(0.,-1.,0.)); +#236876 = ORIENTED_EDGE('',*,*,#236877,.T.); +#236877 = EDGE_CURVE('',#236870,#236878,#236880,.T.); +#236878 = VERTEX_POINT('',#236879); +#236879 = CARTESIAN_POINT('',(140.073168,-53.006428,1.585)); +#236880 = LINE('',#236881,#236882); +#236881 = CARTESIAN_POINT('',(139.774597,-53.006428,1.585)); +#236882 = VECTOR('',#236883,1.); +#236883 = DIRECTION('',(1.,0.,0.)); +#236884 = ORIENTED_EDGE('',*,*,#236885,.T.); +#236885 = EDGE_CURVE('',#236878,#236886,#236888,.T.); +#236886 = VERTEX_POINT('',#236887); +#236887 = CARTESIAN_POINT('',(140.073168,-52.771428,1.585)); +#236888 = LINE('',#236889,#236890); +#236889 = CARTESIAN_POINT('',(140.073168,-53.006428,1.585)); +#236890 = VECTOR('',#236891,1.); +#236891 = DIRECTION('',(0.,1.,0.)); +#236892 = ORIENTED_EDGE('',*,*,#236893,.T.); +#236893 = EDGE_CURVE('',#236886,#236894,#236896,.T.); +#236894 = VERTEX_POINT('',#236895); +#236895 = CARTESIAN_POINT('',(140.203168,-52.771428,1.585)); +#236896 = CIRCLE('',#236897,6.500000000091E-02); +#236897 = AXIS2_PLACEMENT_3D('',#236898,#236899,#236900); +#236898 = CARTESIAN_POINT('',(140.138168,-52.77142834486,1.585)); +#236899 = DIRECTION('',(0.,0.,-1.)); +#236900 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#236901 = ORIENTED_EDGE('',*,*,#236902,.T.); +#236902 = EDGE_CURVE('',#236894,#236903,#236905,.T.); +#236903 = VERTEX_POINT('',#236904); +#236904 = CARTESIAN_POINT('',(140.203168,-53.006428,1.585)); +#236905 = LINE('',#236906,#236907); +#236906 = CARTESIAN_POINT('',(140.203168,-52.771428,1.585)); +#236907 = VECTOR('',#236908,1.); +#236908 = DIRECTION('',(0.,-1.,0.)); +#236909 = ORIENTED_EDGE('',*,*,#236910,.T.); +#236910 = EDGE_CURVE('',#236903,#236911,#236913,.T.); +#236911 = VERTEX_POINT('',#236912); +#236912 = CARTESIAN_POINT('',(140.544597,-53.006428,1.585)); +#236913 = LINE('',#236914,#236915); +#236914 = CARTESIAN_POINT('',(140.203168,-53.006428,1.585)); +#236915 = VECTOR('',#236916,1.); +#236916 = DIRECTION('',(1.,0.,0.)); +#236917 = ORIENTED_EDGE('',*,*,#236918,.T.); +#236918 = EDGE_CURVE('',#236911,#236919,#236921,.T.); +#236919 = VERTEX_POINT('',#236920); +#236920 = CARTESIAN_POINT('',(140.544597,-52.642856,1.585)); +#236921 = LINE('',#236922,#236923); +#236922 = CARTESIAN_POINT('',(140.544597,-53.006428,1.585)); +#236923 = VECTOR('',#236924,1.); +#236924 = DIRECTION('',(0.,1.,0.)); +#236925 = ORIENTED_EDGE('',*,*,#236926,.T.); +#236926 = EDGE_CURVE('',#236919,#236927,#236929,.T.); +#236927 = VERTEX_POINT('',#236928); +#236928 = CARTESIAN_POINT('',(140.674597,-52.642856,1.585)); +#236929 = CIRCLE('',#236930,6.500000000091E-02); +#236930 = AXIS2_PLACEMENT_3D('',#236931,#236932,#236933); +#236931 = CARTESIAN_POINT('',(140.609597,-52.64285634486,1.585)); +#236932 = DIRECTION('',(0.,0.,-1.)); +#236933 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#236934 = ORIENTED_EDGE('',*,*,#236935,.T.); +#236935 = EDGE_CURVE('',#236927,#236936,#236938,.T.); +#236936 = VERTEX_POINT('',#236937); +#236937 = CARTESIAN_POINT('',(140.674597,-53.071428,1.585)); +#236938 = LINE('',#236939,#236940); +#236939 = CARTESIAN_POINT('',(140.674597,-52.642856,1.585)); +#236940 = VECTOR('',#236941,1.); +#236941 = DIRECTION('',(0.,-1.,0.)); +#236942 = ORIENTED_EDGE('',*,*,#236943,.T.); +#236943 = EDGE_CURVE('',#236936,#236944,#236946,.T.); +#236944 = VERTEX_POINT('',#236945); +#236945 = CARTESIAN_POINT('',(140.609597,-53.136428,1.585)); +#236946 = CIRCLE('',#236947,6.500103935393E-02); +#236947 = AXIS2_PLACEMENT_3D('',#236948,#236949,#236950); +#236948 = CARTESIAN_POINT('',(140.60959596065,-53.07142696065,1.585)); +#236949 = DIRECTION('',(0.,0.,-1.)); +#236950 = DIRECTION('',(0.999999999872,-1.598967682012E-05,0.)); +#236951 = ORIENTED_EDGE('',*,*,#236952,.T.); +#236952 = EDGE_CURVE('',#236944,#236953,#236955,.T.); +#236953 = VERTEX_POINT('',#236954); +#236954 = CARTESIAN_POINT('',(139.709597,-53.136428,1.585)); +#236955 = LINE('',#236956,#236957); +#236956 = CARTESIAN_POINT('',(140.609597,-53.136428,1.585)); +#236957 = VECTOR('',#236958,1.); +#236958 = DIRECTION('',(-1.,0.,0.)); +#236959 = ORIENTED_EDGE('',*,*,#236960,.T.); +#236960 = EDGE_CURVE('',#236953,#236961,#236963,.T.); +#236961 = VERTEX_POINT('',#236962); +#236962 = CARTESIAN_POINT('',(139.644597,-53.071428,1.585)); +#236963 = CIRCLE('',#236964,6.500103935387E-02); +#236964 = AXIS2_PLACEMENT_3D('',#236965,#236966,#236967); +#236965 = CARTESIAN_POINT('',(139.70959803934,-53.07142696065,1.585)); +#236966 = DIRECTION('',(0.,0.,-1.)); +#236967 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#236968 = ORIENTED_EDGE('',*,*,#236969,.T.); +#236969 = EDGE_CURVE('',#236961,#236970,#236972,.T.); +#236970 = VERTEX_POINT('',#236971); +#236971 = CARTESIAN_POINT('',(139.644597,-52.642856,1.585)); +#236972 = LINE('',#236973,#236974); +#236973 = CARTESIAN_POINT('',(139.644597,-53.071428,1.585)); +#236974 = VECTOR('',#236975,1.); +#236975 = DIRECTION('',(0.,1.,0.)); +#236976 = ORIENTED_EDGE('',*,*,#236977,.T.); +#236977 = EDGE_CURVE('',#236970,#236859,#236978,.T.); +#236978 = LINE('',#236979,#236980); +#236979 = CARTESIAN_POINT('',(139.644597,-52.642856,1.585)); +#236980 = VECTOR('',#236981,1.); +#236981 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#236982 = PLANE('',#236983); +#236983 = AXIS2_PLACEMENT_3D('',#236984,#236985,#236986); +#236984 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236985 = DIRECTION('',(0.,0.,1.)); +#236986 = DIRECTION('',(1.,0.,-0.)); +#236987 = SHELL_BASED_SURFACE_MODEL('',(#236988)); +#236988 = OPEN_SHELL('',(#236989)); +#236989 = ADVANCED_FACE('',(#236990),#237191,.T.); +#236990 = FACE_BOUND('',#236991,.F.); +#236991 = EDGE_LOOP('',(#236992,#237003,#237011,#237020,#237028,#237036, + #237045,#237053,#237061,#237070,#237078,#237086,#237094,#237102, + #237110,#237118,#237126,#237135,#237143,#237152,#237160,#237168, + #237176,#237185)); +#236992 = ORIENTED_EDGE('',*,*,#236993,.T.); +#236993 = EDGE_CURVE('',#236994,#236996,#236998,.T.); +#236994 = VERTEX_POINT('',#236995); +#236995 = CARTESIAN_POINT('',(177.07388,-52.096493,1.585)); +#236996 = VERTEX_POINT('',#236997); +#236997 = CARTESIAN_POINT('',(177.768137,-52.053596,1.585)); +#236998 = CIRCLE('',#236999,0.762529751519); +#236999 = AXIS2_PLACEMENT_3D('',#237000,#237001,#237002); +#237000 = CARTESIAN_POINT('',(177.46285806099,-52.75234945534,1.585)); +#237001 = DIRECTION('',(0.,0.,-1.)); +#237002 = DIRECTION('',(-0.51011525809,0.860106053614,0.)); +#237003 = ORIENTED_EDGE('',*,*,#237004,.T.); +#237004 = EDGE_CURVE('',#236996,#237005,#237007,.T.); +#237005 = VERTEX_POINT('',#237006); +#237006 = CARTESIAN_POINT('',(177.788829,-52.074288,1.585)); +#237007 = LINE('',#237008,#237009); +#237008 = CARTESIAN_POINT('',(177.768137,-52.053596,1.585)); +#237009 = VECTOR('',#237010,1.); +#237010 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#237011 = ORIENTED_EDGE('',*,*,#237012,.T.); +#237012 = EDGE_CURVE('',#237005,#237013,#237015,.T.); +#237013 = VERTEX_POINT('',#237014); +#237014 = CARTESIAN_POINT('',(177.726469,-52.190956,1.585)); +#237015 = CIRCLE('',#237016,7.49997958033E-02); +#237016 = AXIS2_PLACEMENT_3D('',#237017,#237018,#237019); +#237017 = CARTESIAN_POINT('',(177.72646931647,-52.11595620419,1.585)); +#237018 = DIRECTION('',(0.,0.,-1.)); +#237019 = DIRECTION('',(0.831464710782,0.555577568593,0.)); +#237020 = ORIENTED_EDGE('',*,*,#237021,.T.); +#237021 = EDGE_CURVE('',#237013,#237022,#237024,.T.); +#237022 = VERTEX_POINT('',#237023); +#237023 = CARTESIAN_POINT('',(177.220364,-52.190956,1.585)); +#237024 = LINE('',#237025,#237026); +#237025 = CARTESIAN_POINT('',(177.726469,-52.190956,1.585)); +#237026 = VECTOR('',#237027,1.); +#237027 = DIRECTION('',(-1.,0.,0.)); +#237028 = ORIENTED_EDGE('',*,*,#237029,.T.); +#237029 = EDGE_CURVE('',#237022,#237030,#237032,.T.); +#237030 = VERTEX_POINT('',#237031); +#237031 = CARTESIAN_POINT('',(177.163322,-52.219476,1.585)); +#237032 = LINE('',#237033,#237034); +#237033 = CARTESIAN_POINT('',(177.220364,-52.190956,1.585)); +#237034 = VECTOR('',#237035,1.); +#237035 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#237036 = ORIENTED_EDGE('',*,*,#237037,.T.); +#237037 = EDGE_CURVE('',#237030,#237038,#237040,.T.); +#237038 = VERTEX_POINT('',#237039); +#237039 = CARTESIAN_POINT('',(177.163322,-52.441007,1.585)); +#237040 = CIRCLE('',#237041,0.186653372204); +#237041 = AXIS2_PLACEMENT_3D('',#237042,#237043,#237044); +#237042 = CARTESIAN_POINT('',(177.31355676749,-52.3302415,1.585)); +#237043 = DIRECTION('',(0.,0.,1.)); +#237044 = DIRECTION('',(-0.804886435872,0.593428871347,0.)); +#237045 = ORIENTED_EDGE('',*,*,#237046,.T.); +#237046 = EDGE_CURVE('',#237038,#237047,#237049,.T.); +#237047 = VERTEX_POINT('',#237048); +#237048 = CARTESIAN_POINT('',(177.220364,-52.469528,1.585)); +#237049 = LINE('',#237050,#237051); +#237050 = CARTESIAN_POINT('',(177.163322,-52.441007,1.585)); +#237051 = VECTOR('',#237052,1.); +#237052 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#237053 = ORIENTED_EDGE('',*,*,#237054,.T.); +#237054 = EDGE_CURVE('',#237047,#237055,#237057,.T.); +#237055 = VERTEX_POINT('',#237056); +#237056 = CARTESIAN_POINT('',(177.741101,-52.470969,1.585)); +#237057 = LINE('',#237058,#237059); +#237058 = CARTESIAN_POINT('',(177.220364,-52.469528,1.585)); +#237059 = VECTOR('',#237060,1.); +#237060 = DIRECTION('',(0.999996171236,-2.767221232121E-03,0.)); +#237061 = ORIENTED_EDGE('',*,*,#237062,.T.); +#237062 = EDGE_CURVE('',#237055,#237063,#237065,.T.); +#237063 = VERTEX_POINT('',#237064); +#237064 = CARTESIAN_POINT('',(177.726469,-52.619528,1.585)); +#237065 = CIRCLE('',#237066,7.500006711464E-02); +#237066 = AXIS2_PLACEMENT_3D('',#237067,#237068,#237069); +#237067 = CARTESIAN_POINT('',(177.72646906711,-52.54452793288,1.585)); +#237068 = DIRECTION('',(0.,0.,-1.)); +#237069 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#237070 = ORIENTED_EDGE('',*,*,#237071,.T.); +#237071 = EDGE_CURVE('',#237063,#237072,#237074,.T.); +#237072 = VERTEX_POINT('',#237073); +#237073 = CARTESIAN_POINT('',(177.220364,-52.619528,1.585)); +#237074 = LINE('',#237075,#237076); +#237075 = CARTESIAN_POINT('',(177.726469,-52.619528,1.585)); +#237076 = VECTOR('',#237077,1.); +#237077 = DIRECTION('',(-1.,0.,0.)); +#237078 = ORIENTED_EDGE('',*,*,#237079,.T.); +#237079 = EDGE_CURVE('',#237072,#237080,#237082,.T.); +#237080 = VERTEX_POINT('',#237081); +#237081 = CARTESIAN_POINT('',(177.163322,-52.648048,1.585)); +#237082 = LINE('',#237083,#237084); +#237083 = CARTESIAN_POINT('',(177.220364,-52.619528,1.585)); +#237084 = VECTOR('',#237085,1.); +#237085 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#237086 = ORIENTED_EDGE('',*,*,#237087,.T.); +#237087 = EDGE_CURVE('',#237080,#237088,#237090,.T.); +#237088 = VERTEX_POINT('',#237089); +#237089 = CARTESIAN_POINT('',(177.134802,-52.70509,1.585)); +#237090 = LINE('',#237091,#237092); +#237091 = CARTESIAN_POINT('',(177.163322,-52.648048,1.585)); +#237092 = VECTOR('',#237093,1.); +#237093 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#237094 = ORIENTED_EDGE('',*,*,#237095,.T.); +#237095 = EDGE_CURVE('',#237088,#237096,#237098,.T.); +#237096 = VERTEX_POINT('',#237097); +#237097 = CARTESIAN_POINT('',(177.134802,-52.812537,1.585)); +#237098 = LINE('',#237099,#237100); +#237099 = CARTESIAN_POINT('',(177.134802,-52.70509,1.585)); +#237100 = VECTOR('',#237101,1.); +#237101 = DIRECTION('',(0.,-1.,0.)); +#237102 = ORIENTED_EDGE('',*,*,#237103,.T.); +#237103 = EDGE_CURVE('',#237096,#237104,#237106,.T.); +#237104 = VERTEX_POINT('',#237105); +#237105 = CARTESIAN_POINT('',(177.16906,-52.881053,1.585)); +#237106 = LINE('',#237107,#237108); +#237107 = CARTESIAN_POINT('',(177.134802,-52.812537,1.585)); +#237108 = VECTOR('',#237109,1.); +#237109 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#237110 = ORIENTED_EDGE('',*,*,#237111,.T.); +#237111 = EDGE_CURVE('',#237104,#237112,#237114,.T.); +#237112 = VERTEX_POINT('',#237113); +#237113 = CARTESIAN_POINT('',(177.186106,-52.898099,1.585)); +#237114 = LINE('',#237115,#237116); +#237115 = CARTESIAN_POINT('',(177.16906,-52.881053,1.585)); +#237116 = VECTOR('',#237117,1.); +#237117 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#237118 = ORIENTED_EDGE('',*,*,#237119,.T.); +#237119 = EDGE_CURVE('',#237112,#237120,#237122,.T.); +#237120 = VERTEX_POINT('',#237121); +#237121 = CARTESIAN_POINT('',(177.741101,-52.89954,1.585)); +#237122 = LINE('',#237123,#237124); +#237123 = CARTESIAN_POINT('',(177.186106,-52.898099,1.585)); +#237124 = VECTOR('',#237125,1.); +#237125 = DIRECTION('',(0.999996629319,-2.596411035863E-03,0.)); +#237126 = ORIENTED_EDGE('',*,*,#237127,.T.); +#237127 = EDGE_CURVE('',#237120,#237128,#237130,.T.); +#237128 = VERTEX_POINT('',#237129); +#237129 = CARTESIAN_POINT('',(177.726469,-53.048099,1.585)); +#237130 = CIRCLE('',#237131,7.500006711464E-02); +#237131 = AXIS2_PLACEMENT_3D('',#237132,#237133,#237134); +#237132 = CARTESIAN_POINT('',(177.72646906711,-52.97309893288,1.585)); +#237133 = DIRECTION('',(0.,0.,-1.)); +#237134 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#237135 = ORIENTED_EDGE('',*,*,#237136,.T.); +#237136 = EDGE_CURVE('',#237128,#237137,#237139,.T.); +#237137 = VERTEX_POINT('',#237138); +#237138 = CARTESIAN_POINT('',(177.04517,-53.046658,1.585)); +#237139 = LINE('',#237140,#237141); +#237140 = CARTESIAN_POINT('',(177.726469,-53.048099,1.585)); +#237141 = VECTOR('',#237142,1.); +#237142 = DIRECTION('',(-0.999997763232,2.115072496535E-03,0.)); +#237143 = ORIENTED_EDGE('',*,*,#237144,.T.); +#237144 = EDGE_CURVE('',#237137,#237145,#237147,.T.); +#237145 = VERTEX_POINT('',#237146); +#237146 = CARTESIAN_POINT('',(177.016843,-52.912029,1.585)); +#237147 = CIRCLE('',#237148,7.472382541851E-02); +#237148 = AXIS2_PLACEMENT_3D('',#237149,#237150,#237151); +#237149 = CARTESIAN_POINT('',(177.05956681475,-52.97333418524,1.585)); +#237150 = DIRECTION('',(0.,0.,-1.)); +#237151 = DIRECTION('',(-0.192666993072,-0.981264199785,-0.)); +#237152 = ORIENTED_EDGE('',*,*,#237153,.T.); +#237153 = EDGE_CURVE('',#237145,#237154,#237156,.T.); +#237154 = VERTEX_POINT('',#237155); +#237155 = CARTESIAN_POINT('',(176.986243,-52.844874,1.585)); +#237156 = LINE('',#237157,#237158); +#237157 = CARTESIAN_POINT('',(177.016843,-52.912029,1.585)); +#237158 = VECTOR('',#237159,1.); +#237159 = DIRECTION('',(-0.414645032321,0.90998324005,0.)); +#237160 = ORIENTED_EDGE('',*,*,#237161,.T.); +#237161 = EDGE_CURVE('',#237154,#237162,#237164,.T.); +#237162 = VERTEX_POINT('',#237163); +#237163 = CARTESIAN_POINT('',(176.987465,-52.667576,1.585)); +#237164 = LINE('',#237165,#237166); +#237165 = CARTESIAN_POINT('',(176.986243,-52.844874,1.585)); +#237166 = VECTOR('',#237167,1.); +#237167 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#237168 = ORIENTED_EDGE('',*,*,#237169,.T.); +#237169 = EDGE_CURVE('',#237162,#237170,#237172,.T.); +#237170 = VERTEX_POINT('',#237171); +#237171 = CARTESIAN_POINT('',(177.048171,-52.542893,1.585)); +#237172 = LINE('',#237173,#237174); +#237173 = CARTESIAN_POINT('',(176.987465,-52.667576,1.585)); +#237174 = VECTOR('',#237175,1.); +#237175 = DIRECTION('',(0.437753780471,0.899094893592,0.)); +#237176 = ORIENTED_EDGE('',*,*,#237177,.T.); +#237177 = EDGE_CURVE('',#237170,#237178,#237180,.T.); +#237178 = VERTEX_POINT('',#237179); +#237179 = CARTESIAN_POINT('',(177.048171,-52.117592,1.585)); +#237180 = CIRCLE('',#237181,0.347106732746); +#237181 = AXIS2_PLACEMENT_3D('',#237182,#237183,#237184); +#237182 = CARTESIAN_POINT('',(177.32251175302,-52.3302425,1.585)); +#237183 = DIRECTION('',(0.,0.,-1.)); +#237184 = DIRECTION('',(-0.790364251506,-0.612637209073,-0.)); +#237185 = ORIENTED_EDGE('',*,*,#237186,.T.); +#237186 = EDGE_CURVE('',#237178,#236994,#237187,.T.); +#237187 = LINE('',#237188,#237189); +#237188 = CARTESIAN_POINT('',(177.048171,-52.117592,1.585)); +#237189 = VECTOR('',#237190,1.); +#237190 = DIRECTION('',(0.773007961956,0.634396319939,0.)); +#237191 = PLANE('',#237192); +#237192 = AXIS2_PLACEMENT_3D('',#237193,#237194,#237195); +#237193 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237194 = DIRECTION('',(0.,0.,1.)); +#237195 = DIRECTION('',(1.,0.,-0.)); +#237196 = SHELL_BASED_SURFACE_MODEL('',(#237197)); +#237197 = OPEN_SHELL('',(#237198)); +#237198 = ADVANCED_FACE('',(#237199),#237385,.T.); +#237199 = FACE_BOUND('',#237200,.F.); +#237200 = EDGE_LOOP('',(#237201,#237212,#237220,#237228,#237236,#237244, + #237253,#237261,#237270,#237278,#237287,#237295,#237304,#237312, + #237320,#237328,#237337,#237345,#237353,#237362,#237370,#237379)); +#237201 = ORIENTED_EDGE('',*,*,#237202,.T.); +#237202 = EDGE_CURVE('',#237203,#237205,#237207,.T.); +#237203 = VERTEX_POINT('',#237204); +#237204 = CARTESIAN_POINT('',(150.160369,-52.585342,1.585)); +#237205 = VERTEX_POINT('',#237206); +#237206 = CARTESIAN_POINT('',(150.379225,-52.366485,1.585)); +#237207 = CIRCLE('',#237208,0.308109459502); +#237208 = AXIS2_PLACEMENT_3D('',#237209,#237210,#237211); +#237209 = CARTESIAN_POINT('',(150.45818845359,-52.66430409279,1.585)); +#237210 = DIRECTION('',(0.,0.,-1.)); +#237211 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#237212 = ORIENTED_EDGE('',*,*,#237213,.T.); +#237213 = EDGE_CURVE('',#237205,#237214,#237216,.T.); +#237214 = VERTEX_POINT('',#237215); +#237215 = CARTESIAN_POINT('',(150.611361,-52.364205,1.585)); +#237216 = LINE('',#237217,#237218); +#237217 = CARTESIAN_POINT('',(150.379225,-52.366485,1.585)); +#237218 = VECTOR('',#237219,1.); +#237219 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#237220 = ORIENTED_EDGE('',*,*,#237221,.T.); +#237221 = EDGE_CURVE('',#237214,#237222,#237224,.T.); +#237222 = VERTEX_POINT('',#237223); +#237223 = CARTESIAN_POINT('',(150.637237,-52.370432,1.585)); +#237224 = LINE('',#237225,#237226); +#237225 = CARTESIAN_POINT('',(150.611361,-52.364205,1.585)); +#237226 = VECTOR('',#237227,1.); +#237227 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#237228 = ORIENTED_EDGE('',*,*,#237229,.T.); +#237229 = EDGE_CURVE('',#237222,#237230,#237232,.T.); +#237230 = VERTEX_POINT('',#237231); +#237231 = CARTESIAN_POINT('',(150.739844,-52.425465,1.585)); +#237232 = LINE('',#237233,#237234); +#237233 = CARTESIAN_POINT('',(150.637237,-52.370432,1.585)); +#237234 = VECTOR('',#237235,1.); +#237235 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#237236 = ORIENTED_EDGE('',*,*,#237237,.T.); +#237237 = EDGE_CURVE('',#237230,#237238,#237240,.T.); +#237238 = VERTEX_POINT('',#237239); +#237239 = CARTESIAN_POINT('',(150.794878,-52.485216,1.585)); +#237240 = LINE('',#237241,#237242); +#237241 = CARTESIAN_POINT('',(150.739844,-52.425465,1.585)); +#237242 = VECTOR('',#237243,1.); +#237243 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#237244 = ORIENTED_EDGE('',*,*,#237245,.T.); +#237245 = EDGE_CURVE('',#237238,#237246,#237248,.T.); +#237246 = VERTEX_POINT('',#237247); +#237247 = CARTESIAN_POINT('',(150.788491,-52.980153,1.585)); +#237248 = CIRCLE('',#237249,0.457783772261); +#237249 = AXIS2_PLACEMENT_3D('',#237250,#237251,#237252); +#237250 = CARTESIAN_POINT('',(150.40659953493,-52.72771510455,1.585)); +#237251 = DIRECTION('',(0.,0.,-1.)); +#237252 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#237253 = ORIENTED_EDGE('',*,*,#237254,.T.); +#237254 = EDGE_CURVE('',#237246,#237255,#237257,.T.); +#237255 = VERTEX_POINT('',#237256); +#237256 = CARTESIAN_POINT('',(150.739843,-53.031675,1.585)); +#237257 = LINE('',#237258,#237259); +#237258 = CARTESIAN_POINT('',(150.788491,-52.980153,1.585)); +#237259 = VECTOR('',#237260,1.); +#237260 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#237261 = ORIENTED_EDGE('',*,*,#237262,.T.); +#237262 = EDGE_CURVE('',#237255,#237263,#237265,.T.); +#237263 = VERTEX_POINT('',#237264); +#237264 = CARTESIAN_POINT('',(150.647921,-52.939751,1.585)); +#237265 = CIRCLE('',#237266,6.499937665137E-02); +#237266 = AXIS2_PLACEMENT_3D('',#237267,#237268,#237269); +#237267 = CARTESIAN_POINT('',(150.69388218097,-52.98571281902,1.585)); +#237268 = DIRECTION('',(-0.,0.,-1.)); +#237269 = DIRECTION('',(0.707096304454,-0.707117257764,-0.)); +#237270 = ORIENTED_EDGE('',*,*,#237271,.T.); +#237271 = EDGE_CURVE('',#237263,#237272,#237274,.T.); +#237272 = VERTEX_POINT('',#237273); +#237273 = CARTESIAN_POINT('',(150.683319,-52.904353,1.585)); +#237274 = LINE('',#237275,#237276); +#237275 = CARTESIAN_POINT('',(150.647921,-52.939751,1.585)); +#237276 = VECTOR('',#237277,1.); +#237277 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#237278 = ORIENTED_EDGE('',*,*,#237279,.T.); +#237279 = EDGE_CURVE('',#237272,#237280,#237282,.T.); +#237280 = VERTEX_POINT('',#237281); +#237281 = CARTESIAN_POINT('',(150.683319,-52.552788,1.585)); +#237282 = CIRCLE('',#237283,0.325008683278); +#237283 = AXIS2_PLACEMENT_3D('',#237284,#237285,#237286); +#237284 = CARTESIAN_POINT('',(150.409949,-52.7285705,1.585)); +#237285 = DIRECTION('',(0.,-0.,1.)); +#237286 = DIRECTION('',(0.841115988787,-0.54085478033,-0.)); +#237287 = ORIENTED_EDGE('',*,*,#237288,.T.); +#237288 = EDGE_CURVE('',#237280,#237289,#237291,.T.); +#237289 = VERTEX_POINT('',#237290); +#237290 = CARTESIAN_POINT('',(150.655379,-52.524848,1.585)); +#237291 = LINE('',#237292,#237293); +#237292 = CARTESIAN_POINT('',(150.683319,-52.552788,1.585)); +#237293 = VECTOR('',#237294,1.); +#237294 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#237295 = ORIENTED_EDGE('',*,*,#237296,.T.); +#237296 = EDGE_CURVE('',#237289,#237297,#237299,.T.); +#237297 = VERTEX_POINT('',#237298); +#237298 = CARTESIAN_POINT('',(150.346671,-52.524848,1.585)); +#237299 = CIRCLE('',#237300,0.277419178293); +#237300 = AXIS2_PLACEMENT_3D('',#237301,#237302,#237303); +#237301 = CARTESIAN_POINT('',(150.501025,-52.755361,1.585)); +#237302 = DIRECTION('',(0.,0.,1.)); +#237303 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#237304 = ORIENTED_EDGE('',*,*,#237305,.T.); +#237305 = EDGE_CURVE('',#237297,#237306,#237308,.T.); +#237306 = VERTEX_POINT('',#237307); +#237307 = CARTESIAN_POINT('',(150.318733,-52.552786,1.585)); +#237308 = LINE('',#237309,#237310); +#237309 = CARTESIAN_POINT('',(150.346671,-52.524848,1.585)); +#237310 = VECTOR('',#237311,1.); +#237311 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#237312 = ORIENTED_EDGE('',*,*,#237313,.T.); +#237313 = EDGE_CURVE('',#237306,#237314,#237316,.T.); +#237314 = VERTEX_POINT('',#237315); +#237315 = CARTESIAN_POINT('',(150.287454,-52.615344,1.585)); +#237316 = LINE('',#237317,#237318); +#237317 = CARTESIAN_POINT('',(150.318733,-52.552786,1.585)); +#237318 = VECTOR('',#237319,1.); +#237319 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#237320 = ORIENTED_EDGE('',*,*,#237321,.T.); +#237321 = EDGE_CURVE('',#237314,#237322,#237324,.T.); +#237322 = VERTEX_POINT('',#237323); +#237323 = CARTESIAN_POINT('',(150.287454,-52.72857,1.585)); +#237324 = LINE('',#237325,#237326); +#237325 = CARTESIAN_POINT('',(150.287454,-52.615344,1.585)); +#237326 = VECTOR('',#237327,1.); +#237327 = DIRECTION('',(0.,-1.,0.)); +#237328 = ORIENTED_EDGE('',*,*,#237329,.T.); +#237329 = EDGE_CURVE('',#237322,#237330,#237332,.T.); +#237330 = VERTEX_POINT('',#237331); +#237331 = CARTESIAN_POINT('',(150.179652,-52.777488,1.585)); +#237332 = CIRCLE('',#237333,6.500010429712E-02); +#237333 = AXIS2_PLACEMENT_3D('',#237334,#237335,#237336); +#237334 = CARTESIAN_POINT('',(150.2224538957,-52.72856958544,1.585)); +#237335 = DIRECTION('',(-0.,0.,-1.)); +#237336 = DIRECTION('',(0.99999999998,-6.377788786916E-06,-0.)); +#237337 = ORIENTED_EDGE('',*,*,#237338,.T.); +#237338 = EDGE_CURVE('',#237330,#237339,#237341,.T.); +#237339 = VERTEX_POINT('',#237340); +#237340 = CARTESIAN_POINT('',(149.944597,-52.571814,1.585)); +#237341 = LINE('',#237342,#237343); +#237342 = CARTESIAN_POINT('',(150.179652,-52.777488,1.585)); +#237343 = VECTOR('',#237344,1.); +#237344 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#237345 = ORIENTED_EDGE('',*,*,#237346,.T.); +#237346 = EDGE_CURVE('',#237339,#237347,#237349,.T.); +#237347 = VERTEX_POINT('',#237348); +#237348 = CARTESIAN_POINT('',(149.944597,-52.985713,1.585)); +#237349 = LINE('',#237350,#237351); +#237350 = CARTESIAN_POINT('',(149.944597,-52.571814,1.585)); +#237351 = VECTOR('',#237352,1.); +#237352 = DIRECTION('',(0.,-1.,0.)); +#237353 = ORIENTED_EDGE('',*,*,#237354,.T.); +#237354 = EDGE_CURVE('',#237347,#237355,#237357,.T.); +#237355 = VERTEX_POINT('',#237356); +#237356 = CARTESIAN_POINT('',(149.814597,-52.985713,1.585)); +#237357 = CIRCLE('',#237358,6.500000000091E-02); +#237358 = AXIS2_PLACEMENT_3D('',#237359,#237360,#237361); +#237359 = CARTESIAN_POINT('',(149.879597,-52.98571265513,1.585)); +#237360 = DIRECTION('',(-0.,0.,-1.)); +#237361 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#237362 = ORIENTED_EDGE('',*,*,#237363,.T.); +#237363 = EDGE_CURVE('',#237355,#237364,#237366,.T.); +#237364 = VERTEX_POINT('',#237365); +#237365 = CARTESIAN_POINT('',(149.814597,-52.42857,1.585)); +#237366 = LINE('',#237367,#237368); +#237367 = CARTESIAN_POINT('',(149.814597,-52.985713,1.585)); +#237368 = VECTOR('',#237369,1.); +#237369 = DIRECTION('',(0.,1.,0.)); +#237370 = ORIENTED_EDGE('',*,*,#237371,.T.); +#237371 = EDGE_CURVE('',#237364,#237372,#237374,.T.); +#237372 = VERTEX_POINT('',#237373); +#237373 = CARTESIAN_POINT('',(149.9224,-52.379653,1.585)); +#237374 = CIRCLE('',#237375,6.500002288387E-02); +#237375 = AXIS2_PLACEMENT_3D('',#237376,#237377,#237378); +#237376 = CARTESIAN_POINT('',(149.87959702288,-52.42857036015,1.585)); +#237377 = DIRECTION('',(0.,0.,-1.)); +#237378 = DIRECTION('',(-0.999999999985,5.54088802518E-06,0.)); +#237379 = ORIENTED_EDGE('',*,*,#237380,.T.); +#237380 = EDGE_CURVE('',#237372,#237203,#237381,.T.); +#237381 = LINE('',#237382,#237383); +#237382 = CARTESIAN_POINT('',(149.9224,-52.379653,1.585)); +#237383 = VECTOR('',#237384,1.); +#237384 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#237385 = PLANE('',#237386); +#237386 = AXIS2_PLACEMENT_3D('',#237387,#237388,#237389); +#237387 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237388 = DIRECTION('',(0.,0.,1.)); +#237389 = DIRECTION('',(1.,0.,-0.)); +#237390 = SHELL_BASED_SURFACE_MODEL('',(#237391)); +#237391 = OPEN_SHELL('',(#237392)); +#237392 = ADVANCED_FACE('',(#237393),#237563,.T.); +#237393 = FACE_BOUND('',#237394,.F.); +#237394 = EDGE_LOOP('',(#237395,#237406,#237414,#237423,#237431,#237440, + #237448,#237456,#237464,#237473,#237481,#237490,#237498,#237507, + #237515,#237524,#237532,#237540,#237548,#237557)); +#237395 = ORIENTED_EDGE('',*,*,#237396,.T.); +#237396 = EDGE_CURVE('',#237397,#237399,#237401,.T.); +#237397 = VERTEX_POINT('',#237398); +#237398 = CARTESIAN_POINT('',(142.299349,-52.36118,1.585)); +#237399 = VERTEX_POINT('',#237400); +#237400 = CARTESIAN_POINT('',(142.391273,-52.453104,1.585)); +#237401 = CIRCLE('',#237402,6.50000837538E-02); +#237402 = AXIS2_PLACEMENT_3D('',#237403,#237404,#237405); +#237403 = CARTESIAN_POINT('',(142.34531098493,-52.40714201506,1.585)); +#237404 = DIRECTION('',(0.,0.,-1.)); +#237405 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#237406 = ORIENTED_EDGE('',*,*,#237407,.T.); +#237407 = EDGE_CURVE('',#237399,#237408,#237410,.T.); +#237408 = VERTEX_POINT('',#237409); +#237409 = CARTESIAN_POINT('',(142.359266,-52.48511,1.585)); +#237410 = LINE('',#237411,#237412); +#237411 = CARTESIAN_POINT('',(142.391273,-52.453104,1.585)); +#237412 = VECTOR('',#237413,1.); +#237413 = DIRECTION('',(-0.7071178274,-0.7070957348,0.)); +#237414 = ORIENTED_EDGE('',*,*,#237415,.T.); +#237415 = EDGE_CURVE('',#237408,#237416,#237418,.T.); +#237416 = VERTEX_POINT('',#237417); +#237417 = CARTESIAN_POINT('',(142.359265,-52.757743,1.585)); +#237418 = CIRCLE('',#237419,0.272201331757); +#237419 = AXIS2_PLACEMENT_3D('',#237420,#237421,#237422); +#237420 = CARTESIAN_POINT('',(142.59487402454,-52.62142736419,1.585)); +#237421 = DIRECTION('',(0.,0.,1.)); +#237422 = DIRECTION('',(-0.865565289566,0.50079609573,0.)); +#237423 = ORIENTED_EDGE('',*,*,#237424,.T.); +#237424 = EDGE_CURVE('',#237416,#237425,#237427,.T.); +#237425 = VERTEX_POINT('',#237426); +#237426 = CARTESIAN_POINT('',(142.426669,-52.825149,1.585)); +#237427 = LINE('',#237428,#237429); +#237428 = CARTESIAN_POINT('',(142.359265,-52.757743,1.585)); +#237429 = VECTOR('',#237430,1.); +#237430 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#237431 = ORIENTED_EDGE('',*,*,#237432,.T.); +#237432 = EDGE_CURVE('',#237425,#237433,#237435,.T.); +#237433 = VERTEX_POINT('',#237434); +#237434 = CARTESIAN_POINT('',(142.765881,-52.899285,1.585)); +#237435 = CIRCLE('',#237436,0.553317785495); +#237436 = AXIS2_PLACEMENT_3D('',#237437,#237438,#237439); +#237437 = CARTESIAN_POINT('',(142.7084500839,-52.34895576979,1.585)); +#237438 = DIRECTION('',(0.,0.,1.)); +#237439 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#237440 = ORIENTED_EDGE('',*,*,#237441,.T.); +#237441 = EDGE_CURVE('',#237433,#237442,#237444,.T.); +#237442 = VERTEX_POINT('',#237443); +#237443 = CARTESIAN_POINT('',(142.922622,-52.860099,1.585)); +#237444 = LINE('',#237445,#237446); +#237445 = CARTESIAN_POINT('',(142.765881,-52.899285,1.585)); +#237446 = VECTOR('',#237447,1.); +#237447 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#237448 = ORIENTED_EDGE('',*,*,#237449,.T.); +#237449 = EDGE_CURVE('',#237442,#237450,#237452,.T.); +#237450 = VERTEX_POINT('',#237451); +#237451 = CARTESIAN_POINT('',(142.992522,-52.82515,1.585)); +#237452 = LINE('',#237453,#237454); +#237453 = CARTESIAN_POINT('',(142.922622,-52.860099,1.585)); +#237454 = VECTOR('',#237455,1.); +#237455 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#237456 = ORIENTED_EDGE('',*,*,#237457,.T.); +#237457 = EDGE_CURVE('',#237450,#237458,#237460,.T.); +#237458 = VERTEX_POINT('',#237459); +#237459 = CARTESIAN_POINT('',(143.059928,-52.757743,1.585)); +#237460 = LINE('',#237461,#237462); +#237461 = CARTESIAN_POINT('',(142.992522,-52.82515,1.585)); +#237462 = VECTOR('',#237463,1.); +#237463 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#237464 = ORIENTED_EDGE('',*,*,#237465,.T.); +#237465 = EDGE_CURVE('',#237458,#237466,#237468,.T.); +#237466 = VERTEX_POINT('',#237467); +#237467 = CARTESIAN_POINT('',(143.059928,-52.485111,1.585)); +#237468 = CIRCLE('',#237469,0.272194686174); +#237469 = AXIS2_PLACEMENT_3D('',#237470,#237471,#237472); +#237470 = CARTESIAN_POINT('',(142.82432686391,-52.621427,1.585)); +#237471 = DIRECTION('',(0.,-0.,1.)); +#237472 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#237473 = ORIENTED_EDGE('',*,*,#237474,.T.); +#237474 = EDGE_CURVE('',#237466,#237475,#237477,.T.); +#237475 = VERTEX_POINT('',#237476); +#237476 = CARTESIAN_POINT('',(143.027921,-52.453104,1.585)); +#237477 = LINE('',#237478,#237479); +#237478 = CARTESIAN_POINT('',(143.059928,-52.485111,1.585)); +#237479 = VECTOR('',#237480,1.); +#237480 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#237481 = ORIENTED_EDGE('',*,*,#237482,.T.); +#237482 = EDGE_CURVE('',#237475,#237483,#237485,.T.); +#237483 = VERTEX_POINT('',#237484); +#237484 = CARTESIAN_POINT('',(143.119843,-52.36118,1.585)); +#237485 = CIRCLE('',#237486,6.49993766517E-02); +#237486 = AXIS2_PLACEMENT_3D('',#237487,#237488,#237489); +#237487 = CARTESIAN_POINT('',(143.07388176676,-52.40714176677,1.585)); +#237488 = DIRECTION('',(0.,0.,-1.)); +#237489 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#237490 = ORIENTED_EDGE('',*,*,#237491,.T.); +#237491 = EDGE_CURVE('',#237483,#237492,#237494,.T.); +#237492 = VERTEX_POINT('',#237493); +#237493 = CARTESIAN_POINT('',(143.171003,-52.416461,1.585)); +#237494 = LINE('',#237495,#237496); +#237495 = CARTESIAN_POINT('',(143.119843,-52.36118,1.585)); +#237496 = VECTOR('',#237497,1.); +#237497 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#237498 = ORIENTED_EDGE('',*,*,#237499,.T.); +#237499 = EDGE_CURVE('',#237492,#237500,#237502,.T.); +#237500 = VERTEX_POINT('',#237501); +#237501 = CARTESIAN_POINT('',(143.170999,-52.826399,1.585)); +#237502 = CIRCLE('',#237503,0.409312568567); +#237503 = AXIS2_PLACEMENT_3D('',#237504,#237505,#237506); +#237504 = CARTESIAN_POINT('',(142.81670664807,-52.62142654294,1.585)); +#237505 = DIRECTION('',(0.,0.,-1.)); +#237506 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#237507 = ORIENTED_EDGE('',*,*,#237508,.T.); +#237508 = EDGE_CURVE('',#237500,#237509,#237511,.T.); +#237509 = VERTEX_POINT('',#237510); +#237510 = CARTESIAN_POINT('',(143.068322,-52.930322,1.585)); +#237511 = LINE('',#237512,#237513); +#237512 = CARTESIAN_POINT('',(143.170999,-52.826399,1.585)); +#237513 = VECTOR('',#237514,1.); +#237514 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#237515 = ORIENTED_EDGE('',*,*,#237516,.T.); +#237516 = EDGE_CURVE('',#237509,#237517,#237519,.T.); +#237517 = VERTEX_POINT('',#237518); +#237518 = CARTESIAN_POINT('',(142.629546,-53.027344,1.585)); +#237519 = CIRCLE('',#237520,0.675422176574); +#237520 = AXIS2_PLACEMENT_3D('',#237521,#237522,#237523); +#237521 = CARTESIAN_POINT('',(142.71141275007,-52.35690164465,1.585)); +#237522 = DIRECTION('',(0.,0.,-1.)); +#237523 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#237524 = ORIENTED_EDGE('',*,*,#237525,.T.); +#237525 = EDGE_CURVE('',#237517,#237526,#237528,.T.); +#237526 = VERTEX_POINT('',#237527); +#237527 = CARTESIAN_POINT('',(142.444813,-52.979566,1.585)); +#237528 = LINE('',#237529,#237530); +#237529 = CARTESIAN_POINT('',(142.629546,-53.027344,1.585)); +#237530 = VECTOR('',#237531,1.); +#237531 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#237532 = ORIENTED_EDGE('',*,*,#237533,.T.); +#237533 = EDGE_CURVE('',#237526,#237534,#237536,.T.); +#237534 = VERTEX_POINT('',#237535); +#237535 = CARTESIAN_POINT('',(142.342206,-52.924533,1.585)); +#237536 = LINE('',#237537,#237538); +#237537 = CARTESIAN_POINT('',(142.444813,-52.979566,1.585)); +#237538 = VECTOR('',#237539,1.); +#237539 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#237540 = ORIENTED_EDGE('',*,*,#237541,.T.); +#237541 = EDGE_CURVE('',#237534,#237542,#237544,.T.); +#237542 = VERTEX_POINT('',#237543); +#237543 = CARTESIAN_POINT('',(142.248191,-52.826395,1.585)); +#237544 = LINE('',#237545,#237546); +#237545 = CARTESIAN_POINT('',(142.342206,-52.924533,1.585)); +#237546 = VECTOR('',#237547,1.); +#237547 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#237548 = ORIENTED_EDGE('',*,*,#237549,.T.); +#237549 = EDGE_CURVE('',#237542,#237550,#237552,.T.); +#237550 = VERTEX_POINT('',#237551); +#237551 = CARTESIAN_POINT('',(142.248194,-52.416455,1.585)); +#237552 = CIRCLE('',#237553,0.409312909751); +#237553 = AXIS2_PLACEMENT_3D('',#237554,#237555,#237556); +#237554 = CARTESIAN_POINT('',(142.60248666757,-52.62142759277,1.585)); +#237555 = DIRECTION('',(0.,0.,-1.)); +#237556 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#237557 = ORIENTED_EDGE('',*,*,#237558,.T.); +#237558 = EDGE_CURVE('',#237550,#237397,#237559,.T.); +#237559 = LINE('',#237560,#237561); +#237560 = CARTESIAN_POINT('',(142.248194,-52.416455,1.585)); +#237561 = VECTOR('',#237562,1.); +#237562 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#237563 = PLANE('',#237564); +#237564 = AXIS2_PLACEMENT_3D('',#237565,#237566,#237567); +#237565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237566 = DIRECTION('',(0.,0.,1.)); +#237567 = DIRECTION('',(1.,0.,-0.)); +#237568 = SHELL_BASED_SURFACE_MODEL('',(#237569)); +#237569 = OPEN_SHELL('',(#237570)); +#237570 = ADVANCED_FACE('',(#237571),#237681,.T.); +#237571 = FACE_BOUND('',#237572,.F.); +#237572 = EDGE_LOOP('',(#237573,#237584,#237592,#237600,#237609,#237617, + #237625,#237634,#237642,#237650,#237659,#237667,#237675)); +#237573 = ORIENTED_EDGE('',*,*,#237574,.T.); +#237574 = EDGE_CURVE('',#237575,#237577,#237579,.T.); +#237575 = VERTEX_POINT('',#237576); +#237576 = CARTESIAN_POINT('',(152.788717,-52.150139,1.585)); +#237577 = VERTEX_POINT('',#237578); +#237578 = CARTESIAN_POINT('',(152.90415,-52.1731,1.585)); +#237579 = CIRCLE('',#237580,6.000007318647E-02); +#237580 = AXIS2_PLACEMENT_3D('',#237581,#237582,#237583); +#237581 = CARTESIAN_POINT('',(152.84414992681,-52.17309982331,1.585)); +#237582 = DIRECTION('',(0.,0.,-1.)); +#237583 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#237584 = ORIENTED_EDGE('',*,*,#237585,.T.); +#237585 = EDGE_CURVE('',#237577,#237586,#237588,.T.); +#237586 = VERTEX_POINT('',#237587); +#237587 = CARTESIAN_POINT('',(152.90415,-52.50685,1.585)); +#237588 = LINE('',#237589,#237590); +#237589 = CARTESIAN_POINT('',(152.90415,-52.1731,1.585)); +#237590 = VECTOR('',#237591,1.); +#237591 = DIRECTION('',(0.,-1.,0.)); +#237592 = ORIENTED_EDGE('',*,*,#237593,.T.); +#237593 = EDGE_CURVE('',#237586,#237594,#237596,.T.); +#237594 = VERTEX_POINT('',#237595); +#237595 = CARTESIAN_POINT('',(153.2379,-52.50685,1.585)); +#237596 = LINE('',#237597,#237598); +#237597 = CARTESIAN_POINT('',(152.90415,-52.50685,1.585)); +#237598 = VECTOR('',#237599,1.); +#237599 = DIRECTION('',(1.,0.,0.)); +#237600 = ORIENTED_EDGE('',*,*,#237601,.T.); +#237601 = EDGE_CURVE('',#237594,#237602,#237604,.T.); +#237602 = VERTEX_POINT('',#237603); +#237603 = CARTESIAN_POINT('',(153.2379,-52.62685,1.585)); +#237604 = CIRCLE('',#237605,6.000000000043E-02); +#237605 = AXIS2_PLACEMENT_3D('',#237606,#237607,#237608); +#237606 = CARTESIAN_POINT('',(153.23790022558,-52.56685,1.585)); +#237607 = DIRECTION('',(0.,0.,-1.)); +#237608 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#237609 = ORIENTED_EDGE('',*,*,#237610,.T.); +#237610 = EDGE_CURVE('',#237602,#237611,#237613,.T.); +#237611 = VERTEX_POINT('',#237612); +#237612 = CARTESIAN_POINT('',(152.90415,-52.62685,1.585)); +#237613 = LINE('',#237614,#237615); +#237614 = CARTESIAN_POINT('',(153.2379,-52.62685,1.585)); +#237615 = VECTOR('',#237616,1.); +#237616 = DIRECTION('',(-1.,0.,0.)); +#237617 = ORIENTED_EDGE('',*,*,#237618,.T.); +#237618 = EDGE_CURVE('',#237611,#237619,#237621,.T.); +#237619 = VERTEX_POINT('',#237620); +#237620 = CARTESIAN_POINT('',(152.90415,-52.9606,1.585)); +#237621 = LINE('',#237622,#237623); +#237622 = CARTESIAN_POINT('',(152.90415,-52.62685,1.585)); +#237623 = VECTOR('',#237624,1.); +#237624 = DIRECTION('',(0.,-1.,0.)); +#237625 = ORIENTED_EDGE('',*,*,#237626,.T.); +#237626 = EDGE_CURVE('',#237619,#237627,#237629,.T.); +#237627 = VERTEX_POINT('',#237628); +#237628 = CARTESIAN_POINT('',(152.78415,-52.9606,1.585)); +#237629 = CIRCLE('',#237630,6.000000000042E-02); +#237630 = AXIS2_PLACEMENT_3D('',#237631,#237632,#237633); +#237631 = CARTESIAN_POINT('',(152.84415,-52.96060022558,1.585)); +#237632 = DIRECTION('',(0.,0.,-1.)); +#237633 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#237634 = ORIENTED_EDGE('',*,*,#237635,.T.); +#237635 = EDGE_CURVE('',#237627,#237636,#237638,.T.); +#237636 = VERTEX_POINT('',#237637); +#237637 = CARTESIAN_POINT('',(152.78415,-52.62685,1.585)); +#237638 = LINE('',#237639,#237640); +#237639 = CARTESIAN_POINT('',(152.78415,-52.9606,1.585)); +#237640 = VECTOR('',#237641,1.); +#237641 = DIRECTION('',(0.,1.,0.)); +#237642 = ORIENTED_EDGE('',*,*,#237643,.T.); +#237643 = EDGE_CURVE('',#237636,#237644,#237646,.T.); +#237644 = VERTEX_POINT('',#237645); +#237645 = CARTESIAN_POINT('',(152.4504,-52.62685,1.585)); +#237646 = LINE('',#237647,#237648); +#237647 = CARTESIAN_POINT('',(152.78415,-52.62685,1.585)); +#237648 = VECTOR('',#237649,1.); +#237649 = DIRECTION('',(-1.,0.,0.)); +#237650 = ORIENTED_EDGE('',*,*,#237651,.T.); +#237651 = EDGE_CURVE('',#237644,#237652,#237654,.T.); +#237652 = VERTEX_POINT('',#237653); +#237653 = CARTESIAN_POINT('',(152.4504,-52.50685,1.585)); +#237654 = CIRCLE('',#237655,6.000000000042E-02); +#237655 = AXIS2_PLACEMENT_3D('',#237656,#237657,#237658); +#237656 = CARTESIAN_POINT('',(152.45039977441,-52.56685,1.585)); +#237657 = DIRECTION('',(0.,0.,-1.)); +#237658 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#237659 = ORIENTED_EDGE('',*,*,#237660,.T.); +#237660 = EDGE_CURVE('',#237652,#237661,#237663,.T.); +#237661 = VERTEX_POINT('',#237662); +#237662 = CARTESIAN_POINT('',(152.78415,-52.50685,1.585)); +#237663 = LINE('',#237664,#237665); +#237664 = CARTESIAN_POINT('',(152.4504,-52.50685,1.585)); +#237665 = VECTOR('',#237666,1.); +#237666 = DIRECTION('',(1.,0.,0.)); +#237667 = ORIENTED_EDGE('',*,*,#237668,.T.); +#237668 = EDGE_CURVE('',#237661,#237669,#237671,.T.); +#237669 = VERTEX_POINT('',#237670); +#237670 = CARTESIAN_POINT('',(152.78415,-52.1731,1.585)); +#237671 = LINE('',#237672,#237673); +#237672 = CARTESIAN_POINT('',(152.78415,-52.50685,1.585)); +#237673 = VECTOR('',#237674,1.); +#237674 = DIRECTION('',(0.,1.,0.)); +#237675 = ORIENTED_EDGE('',*,*,#237676,.T.); +#237676 = EDGE_CURVE('',#237669,#237575,#237677,.T.); +#237677 = LINE('',#237678,#237679); +#237678 = CARTESIAN_POINT('',(152.78415,-52.1731,1.585)); +#237679 = VECTOR('',#237680,1.); +#237680 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#237681 = PLANE('',#237682); +#237682 = AXIS2_PLACEMENT_3D('',#237683,#237684,#237685); +#237683 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237684 = DIRECTION('',(0.,0.,1.)); +#237685 = DIRECTION('',(1.,0.,-0.)); +#237686 = SHELL_BASED_SURFACE_MODEL('',(#237687)); +#237687 = OPEN_SHELL('',(#237688)); +#237688 = ADVANCED_FACE('',(#237689),#237816,.T.); +#237689 = FACE_BOUND('',#237690,.F.); +#237690 = EDGE_LOOP('',(#237691,#237702,#237710,#237719,#237727,#237735, + #237744,#237752,#237761,#237769,#237777,#237786,#237794,#237802, + #237810)); +#237691 = ORIENTED_EDGE('',*,*,#237692,.T.); +#237692 = EDGE_CURVE('',#237693,#237695,#237697,.T.); +#237693 = VERTEX_POINT('',#237694); +#237694 = CARTESIAN_POINT('',(134.695417,-52.153144,1.585)); +#237695 = VERTEX_POINT('',#237696); +#237696 = CARTESIAN_POINT('',(134.774652,-52.079624,1.585)); +#237697 = CIRCLE('',#237698,6.499974290213E-02); +#237698 = AXIS2_PLACEMENT_3D('',#237699,#237700,#237701); +#237699 = CARTESIAN_POINT('',(134.75959745151,-52.14285632675,1.585)); +#237700 = DIRECTION('',(0.,0.,-1.)); +#237701 = DIRECTION('',(-0.987395467259,-0.158272522053,-0.)); +#237702 = ORIENTED_EDGE('',*,*,#237703,.T.); +#237703 = EDGE_CURVE('',#237695,#237704,#237706,.T.); +#237704 = VERTEX_POINT('',#237705); +#237705 = CARTESIAN_POINT('',(135.674652,-52.293908,1.585)); +#237706 = LINE('',#237707,#237708); +#237707 = CARTESIAN_POINT('',(134.774652,-52.079624,1.585)); +#237708 = VECTOR('',#237709,1.); +#237709 = DIRECTION('',(0.972806632197,-0.231618773749,0.)); +#237710 = ORIENTED_EDGE('',*,*,#237711,.T.); +#237711 = EDGE_CURVE('',#237704,#237712,#237714,.T.); +#237712 = VERTEX_POINT('',#237713); +#237713 = CARTESIAN_POINT('',(135.676345,-52.419946,1.585)); +#237714 = CIRCLE('',#237715,6.500038054112E-02); +#237715 = AXIS2_PLACEMENT_3D('',#237716,#237717,#237718); +#237716 = CARTESIAN_POINT('',(135.65959589274,-52.35714061108,1.585)); +#237717 = DIRECTION('',(0.,0.,-1.)); +#237718 = DIRECTION('',(0.231631063247,0.972803706068,0.)); +#237719 = ORIENTED_EDGE('',*,*,#237720,.T.); +#237720 = EDGE_CURVE('',#237712,#237721,#237723,.T.); +#237721 = VERTEX_POINT('',#237722); +#237722 = CARTESIAN_POINT('',(135.269006,-52.528569,1.585)); +#237723 = LINE('',#237724,#237725); +#237724 = CARTESIAN_POINT('',(135.676345,-52.419946,1.585)); +#237725 = VECTOR('',#237726,1.); +#237726 = DIRECTION('',(-0.966235372674,-0.257661026531,0.)); +#237727 = ORIENTED_EDGE('',*,*,#237728,.T.); +#237728 = EDGE_CURVE('',#237721,#237729,#237731,.T.); +#237729 = VERTEX_POINT('',#237730); +#237730 = CARTESIAN_POINT('',(135.676345,-52.637193,1.585)); +#237731 = LINE('',#237732,#237733); +#237732 = CARTESIAN_POINT('',(135.269006,-52.528569,1.585)); +#237733 = VECTOR('',#237734,1.); +#237734 = DIRECTION('',(0.96623478212,-0.257663241116,0.)); +#237735 = ORIENTED_EDGE('',*,*,#237736,.T.); +#237736 = EDGE_CURVE('',#237729,#237737,#237739,.T.); +#237737 = VERTEX_POINT('',#237738); +#237738 = CARTESIAN_POINT('',(135.674653,-52.76323,1.585)); +#237739 = CIRCLE('',#237740,6.499990114103E-02); +#237740 = AXIS2_PLACEMENT_3D('',#237741,#237742,#237743); +#237741 = CARTESIAN_POINT('',(135.65959634257,-52.69999801272,1.585)); +#237742 = DIRECTION('',(0.,0.,-1.)); +#237743 = DIRECTION('',(0.257672044635,0.966232434466,0.)); +#237744 = ORIENTED_EDGE('',*,*,#237745,.T.); +#237745 = EDGE_CURVE('',#237737,#237746,#237748,.T.); +#237746 = VERTEX_POINT('',#237747); +#237747 = CARTESIAN_POINT('',(134.774652,-52.977516,1.585)); +#237748 = LINE('',#237749,#237750); +#237749 = CARTESIAN_POINT('',(135.674653,-52.76323,1.585)); +#237750 = VECTOR('',#237751,1.); +#237751 = DIRECTION('',(-0.972806203088,-0.231620576016,0.)); +#237752 = ORIENTED_EDGE('',*,*,#237753,.T.); +#237753 = EDGE_CURVE('',#237746,#237754,#237756,.T.); +#237754 = VERTEX_POINT('',#237755); +#237755 = CARTESIAN_POINT('',(134.744542,-52.851052,1.585)); +#237756 = CIRCLE('',#237757,6.499952960857E-02); +#237757 = AXIS2_PLACEMENT_3D('',#237758,#237759,#237760); +#237758 = CARTESIAN_POINT('',(134.75959643655,-52.91428413415,1.585)); +#237759 = DIRECTION('',(0.,0.,-1.)); +#237760 = DIRECTION('',(0.231625729228,-0.972804976118,0.)); +#237761 = ORIENTED_EDGE('',*,*,#237762,.T.); +#237762 = EDGE_CURVE('',#237754,#237763,#237765,.T.); +#237763 = VERTEX_POINT('',#237764); +#237764 = CARTESIAN_POINT('',(135.393951,-52.69643,1.585)); +#237765 = LINE('',#237766,#237767); +#237766 = CARTESIAN_POINT('',(134.744542,-52.851052,1.585)); +#237767 = VECTOR('',#237768,1.); +#237768 = DIRECTION('',(0.972805941447,0.231621674905,0.)); +#237769 = ORIENTED_EDGE('',*,*,#237770,.T.); +#237770 = EDGE_CURVE('',#237763,#237771,#237773,.T.); +#237771 = VERTEX_POINT('',#237772); +#237772 = CARTESIAN_POINT('',(134.999992,-52.591375,1.585)); +#237773 = LINE('',#237774,#237775); +#237774 = CARTESIAN_POINT('',(135.393951,-52.69643,1.585)); +#237775 = VECTOR('',#237776,1.); +#237776 = DIRECTION('',(-0.966235387383,0.257660971374,0.)); +#237777 = ORIENTED_EDGE('',*,*,#237778,.T.); +#237778 = EDGE_CURVE('',#237771,#237779,#237781,.T.); +#237779 = VERTEX_POINT('',#237780); +#237780 = CARTESIAN_POINT('',(134.999992,-52.465765,1.585)); +#237781 = CIRCLE('',#237782,6.499988512274E-02); +#237782 = AXIS2_PLACEMENT_3D('',#237783,#237784,#237785); +#237783 = CARTESIAN_POINT('',(135.01674064295,-52.52857,1.585)); +#237784 = DIRECTION('',(0.,0.,-1.)); +#237785 = DIRECTION('',(-0.257671885533,-0.966232476895,-0.)); +#237786 = ORIENTED_EDGE('',*,*,#237787,.T.); +#237787 = EDGE_CURVE('',#237779,#237788,#237790,.T.); +#237788 = VERTEX_POINT('',#237789); +#237789 = CARTESIAN_POINT('',(135.393951,-52.360708,1.585)); +#237790 = LINE('',#237791,#237792); +#237791 = CARTESIAN_POINT('',(134.999992,-52.465765,1.585)); +#237792 = VECTOR('',#237793,1.); +#237793 = DIRECTION('',(0.966234166155,0.257665550968,0.)); +#237794 = ORIENTED_EDGE('',*,*,#237795,.T.); +#237795 = EDGE_CURVE('',#237788,#237796,#237798,.T.); +#237796 = VERTEX_POINT('',#237797); +#237797 = CARTESIAN_POINT('',(134.744542,-52.206088,1.585)); +#237798 = LINE('',#237799,#237800); +#237799 = CARTESIAN_POINT('',(135.393951,-52.360708,1.585)); +#237800 = VECTOR('',#237801,1.); +#237801 = DIRECTION('',(-0.972806616505,0.231618839659,0.)); +#237802 = ORIENTED_EDGE('',*,*,#237803,.T.); +#237803 = EDGE_CURVE('',#237796,#237804,#237806,.T.); +#237804 = VERTEX_POINT('',#237805); +#237805 = CARTESIAN_POINT('',(134.72149,-52.195514,1.585)); +#237806 = LINE('',#237807,#237808); +#237807 = CARTESIAN_POINT('',(134.744542,-52.206088,1.585)); +#237808 = VECTOR('',#237809,1.); +#237809 = DIRECTION('',(-0.908937835688,0.416931662093,0.)); +#237810 = ORIENTED_EDGE('',*,*,#237811,.T.); +#237811 = EDGE_CURVE('',#237804,#237693,#237812,.T.); +#237812 = LINE('',#237813,#237814); +#237813 = CARTESIAN_POINT('',(134.72149,-52.195514,1.585)); +#237814 = VECTOR('',#237815,1.); +#237815 = DIRECTION('',(-0.524085089139,0.851665908289,0.)); +#237816 = PLANE('',#237817); +#237817 = AXIS2_PLACEMENT_3D('',#237818,#237819,#237820); +#237818 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237819 = DIRECTION('',(0.,0.,1.)); +#237820 = DIRECTION('',(1.,0.,-0.)); +#237821 = SHELL_BASED_SURFACE_MODEL('',(#237822)); +#237822 = OPEN_SHELL('',(#237823)); +#237823 = ADVANCED_FACE('',(#237824),#237901,.T.); +#237824 = FACE_BOUND('',#237825,.F.); +#237825 = EDGE_LOOP('',(#237826,#237837,#237845,#237853,#237862,#237870, + #237878,#237887,#237895)); +#237826 = ORIENTED_EDGE('',*,*,#237827,.T.); +#237827 = EDGE_CURVE('',#237828,#237830,#237832,.T.); +#237828 = VERTEX_POINT('',#237829); +#237829 = CARTESIAN_POINT('',(121.849545,-52.282268,1.585)); +#237830 = VERTEX_POINT('',#237831); +#237831 = CARTESIAN_POINT('',(121.974597,-52.307142,1.585)); +#237832 = CIRCLE('',#237833,6.499988811648E-02); +#237833 = AXIS2_PLACEMENT_3D('',#237834,#237835,#237836); +#237834 = CARTESIAN_POINT('',(121.90959711188,-52.3071422701,1.585)); +#237835 = DIRECTION('',(0.,0.,-1.)); +#237836 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#237837 = ORIENTED_EDGE('',*,*,#237838,.T.); +#237838 = EDGE_CURVE('',#237830,#237839,#237841,.T.); +#237839 = VERTEX_POINT('',#237840); +#237840 = CARTESIAN_POINT('',(121.974597,-52.499284,1.585)); +#237841 = LINE('',#237842,#237843); +#237842 = CARTESIAN_POINT('',(121.974597,-52.307142,1.585)); +#237843 = VECTOR('',#237844,1.); +#237844 = DIRECTION('',(0.,-1.,0.)); +#237845 = ORIENTED_EDGE('',*,*,#237846,.T.); +#237846 = EDGE_CURVE('',#237839,#237847,#237849,.T.); +#237847 = VERTEX_POINT('',#237848); +#237848 = CARTESIAN_POINT('',(122.809597,-52.499284,1.585)); +#237849 = LINE('',#237850,#237851); +#237850 = CARTESIAN_POINT('',(121.974597,-52.499284,1.585)); +#237851 = VECTOR('',#237852,1.); +#237852 = DIRECTION('',(1.,0.,0.)); +#237853 = ORIENTED_EDGE('',*,*,#237854,.T.); +#237854 = EDGE_CURVE('',#237847,#237855,#237857,.T.); +#237855 = VERTEX_POINT('',#237856); +#237856 = CARTESIAN_POINT('',(122.809597,-52.629284,1.585)); +#237857 = CIRCLE('',#237858,6.500000000091E-02); +#237858 = AXIS2_PLACEMENT_3D('',#237859,#237860,#237861); +#237859 = CARTESIAN_POINT('',(122.80959665513,-52.564284,1.585)); +#237860 = DIRECTION('',(0.,0.,-1.)); +#237861 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#237862 = ORIENTED_EDGE('',*,*,#237863,.T.); +#237863 = EDGE_CURVE('',#237855,#237864,#237866,.T.); +#237864 = VERTEX_POINT('',#237865); +#237865 = CARTESIAN_POINT('',(121.974597,-52.629284,1.585)); +#237866 = LINE('',#237867,#237868); +#237867 = CARTESIAN_POINT('',(122.809597,-52.629284,1.585)); +#237868 = VECTOR('',#237869,1.); +#237869 = DIRECTION('',(-1.,0.,0.)); +#237870 = ORIENTED_EDGE('',*,*,#237871,.T.); +#237871 = EDGE_CURVE('',#237864,#237872,#237874,.T.); +#237872 = VERTEX_POINT('',#237873); +#237873 = CARTESIAN_POINT('',(121.974597,-52.821427,1.585)); +#237874 = LINE('',#237875,#237876); +#237875 = CARTESIAN_POINT('',(121.974597,-52.629284,1.585)); +#237876 = VECTOR('',#237877,1.); +#237877 = DIRECTION('',(0.,-1.,0.)); +#237878 = ORIENTED_EDGE('',*,*,#237879,.T.); +#237879 = EDGE_CURVE('',#237872,#237880,#237882,.T.); +#237880 = VERTEX_POINT('',#237881); +#237881 = CARTESIAN_POINT('',(121.844597,-52.821427,1.585)); +#237882 = CIRCLE('',#237883,6.500000000092E-02); +#237883 = AXIS2_PLACEMENT_3D('',#237884,#237885,#237886); +#237884 = CARTESIAN_POINT('',(121.909597,-52.82142665513,1.585)); +#237885 = DIRECTION('',(-0.,0.,-1.)); +#237886 = DIRECTION('',(0.999999999986,-5.305658244296E-06,-0.)); +#237887 = ORIENTED_EDGE('',*,*,#237888,.T.); +#237888 = EDGE_CURVE('',#237880,#237889,#237891,.T.); +#237889 = VERTEX_POINT('',#237890); +#237890 = CARTESIAN_POINT('',(121.844597,-52.307142,1.585)); +#237891 = LINE('',#237892,#237893); +#237892 = CARTESIAN_POINT('',(121.844597,-52.821427,1.585)); +#237893 = VECTOR('',#237894,1.); +#237894 = DIRECTION('',(0.,1.,0.)); +#237895 = ORIENTED_EDGE('',*,*,#237896,.T.); +#237896 = EDGE_CURVE('',#237889,#237828,#237897,.T.); +#237897 = LINE('',#237898,#237899); +#237898 = CARTESIAN_POINT('',(121.844597,-52.307142,1.585)); +#237899 = VECTOR('',#237900,1.); +#237900 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#237901 = PLANE('',#237902); +#237902 = AXIS2_PLACEMENT_3D('',#237903,#237904,#237905); +#237903 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237904 = DIRECTION('',(0.,0.,1.)); +#237905 = DIRECTION('',(1.,0.,-0.)); +#237906 = SHELL_BASED_SURFACE_MODEL('',(#237907)); +#237907 = OPEN_SHELL('',(#237908)); +#237908 = ADVANCED_FACE('',(#237909,#237979),#238013,.T.); +#237909 = FACE_BOUND('',#237910,.F.); +#237910 = EDGE_LOOP('',(#237911,#237922,#237930,#237939,#237947,#237956, + #237964,#237973)); +#237911 = ORIENTED_EDGE('',*,*,#237912,.T.); +#237912 = EDGE_CURVE('',#237913,#237915,#237917,.T.); +#237913 = VERTEX_POINT('',#237914); +#237914 = CARTESIAN_POINT('',(109.75165,-47.5931,1.585)); +#237915 = VERTEX_POINT('',#237916); +#237916 = CARTESIAN_POINT('',(109.81165,-47.5331,1.585)); +#237917 = CIRCLE('',#237918,5.999932016262E-02); +#237918 = AXIS2_PLACEMENT_3D('',#237919,#237920,#237921); +#237919 = CARTESIAN_POINT('',(109.81164932015,-47.59309932015,1.585)); +#237920 = DIRECTION('',(0.,0.,-1.)); +#237921 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#237922 = ORIENTED_EDGE('',*,*,#237923,.T.); +#237923 = EDGE_CURVE('',#237915,#237924,#237926,.T.); +#237924 = VERTEX_POINT('',#237925); +#237925 = CARTESIAN_POINT('',(112.57165,-47.5331,1.585)); +#237926 = LINE('',#237927,#237928); +#237927 = CARTESIAN_POINT('',(109.81165,-47.5331,1.585)); +#237928 = VECTOR('',#237929,1.); +#237929 = DIRECTION('',(1.,0.,0.)); +#237930 = ORIENTED_EDGE('',*,*,#237931,.T.); +#237931 = EDGE_CURVE('',#237924,#237932,#237934,.T.); +#237932 = VERTEX_POINT('',#237933); +#237933 = CARTESIAN_POINT('',(112.63165,-47.5931,1.585)); +#237934 = CIRCLE('',#237935,5.999932016258E-02); +#237935 = AXIS2_PLACEMENT_3D('',#237936,#237937,#237938); +#237936 = CARTESIAN_POINT('',(112.57165067984,-47.59309932015,1.585)); +#237937 = DIRECTION('',(0.,0.,-1.)); +#237938 = DIRECTION('',(-1.133081588458E-05,0.999999999936,0.)); +#237939 = ORIENTED_EDGE('',*,*,#237940,.T.); +#237940 = EDGE_CURVE('',#237932,#237941,#237943,.T.); +#237941 = VERTEX_POINT('',#237942); +#237942 = CARTESIAN_POINT('',(112.63165,-52.7831,1.585)); +#237943 = LINE('',#237944,#237945); +#237944 = CARTESIAN_POINT('',(112.63165,-47.5931,1.585)); +#237945 = VECTOR('',#237946,1.); +#237946 = DIRECTION('',(0.,-1.,0.)); +#237947 = ORIENTED_EDGE('',*,*,#237948,.T.); +#237948 = EDGE_CURVE('',#237941,#237949,#237951,.T.); +#237949 = VERTEX_POINT('',#237950); +#237950 = CARTESIAN_POINT('',(112.57165,-52.8431,1.585)); +#237951 = CIRCLE('',#237952,5.999932016259E-02); +#237952 = AXIS2_PLACEMENT_3D('',#237953,#237954,#237955); +#237953 = CARTESIAN_POINT('',(112.57165067984,-52.78310067984,1.585)); +#237954 = DIRECTION('',(0.,0.,-1.)); +#237955 = DIRECTION('',(0.999999999936,1.133081612143E-05,0.)); +#237956 = ORIENTED_EDGE('',*,*,#237957,.T.); +#237957 = EDGE_CURVE('',#237949,#237958,#237960,.T.); +#237958 = VERTEX_POINT('',#237959); +#237959 = CARTESIAN_POINT('',(109.81165,-52.8431,1.585)); +#237960 = LINE('',#237961,#237962); +#237961 = CARTESIAN_POINT('',(112.57165,-52.8431,1.585)); +#237962 = VECTOR('',#237963,1.); +#237963 = DIRECTION('',(-1.,0.,0.)); +#237964 = ORIENTED_EDGE('',*,*,#237965,.T.); +#237965 = EDGE_CURVE('',#237958,#237966,#237968,.T.); +#237966 = VERTEX_POINT('',#237967); +#237967 = CARTESIAN_POINT('',(109.75165,-52.7831,1.585)); +#237968 = CIRCLE('',#237969,5.999932016261E-02); +#237969 = AXIS2_PLACEMENT_3D('',#237970,#237971,#237972); +#237970 = CARTESIAN_POINT('',(109.81164932015,-52.78310067984,1.585)); +#237971 = DIRECTION('',(0.,0.,-1.)); +#237972 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#237973 = ORIENTED_EDGE('',*,*,#237974,.T.); +#237974 = EDGE_CURVE('',#237966,#237913,#237975,.T.); +#237975 = LINE('',#237976,#237977); +#237976 = CARTESIAN_POINT('',(109.75165,-52.7831,1.585)); +#237977 = VECTOR('',#237978,1.); +#237978 = DIRECTION('',(0.,1.,0.)); +#237979 = FACE_BOUND('',#237980,.F.); +#237980 = EDGE_LOOP('',(#237981,#237991,#237999,#238007)); +#237981 = ORIENTED_EDGE('',*,*,#237982,.T.); +#237982 = EDGE_CURVE('',#237983,#237985,#237987,.T.); +#237983 = VERTEX_POINT('',#237984); +#237984 = CARTESIAN_POINT('',(112.51165,-52.7231,1.585)); +#237985 = VERTEX_POINT('',#237986); +#237986 = CARTESIAN_POINT('',(112.51165,-47.6531,1.585)); +#237987 = LINE('',#237988,#237989); +#237988 = CARTESIAN_POINT('',(112.51165,-52.7231,1.585)); +#237989 = VECTOR('',#237990,1.); +#237990 = DIRECTION('',(0.,1.,0.)); +#237991 = ORIENTED_EDGE('',*,*,#237992,.T.); +#237992 = EDGE_CURVE('',#237985,#237993,#237995,.T.); +#237993 = VERTEX_POINT('',#237994); +#237994 = CARTESIAN_POINT('',(109.87165,-47.6531,1.585)); +#237995 = LINE('',#237996,#237997); +#237996 = CARTESIAN_POINT('',(112.51165,-47.6531,1.585)); +#237997 = VECTOR('',#237998,1.); +#237998 = DIRECTION('',(-1.,0.,0.)); +#237999 = ORIENTED_EDGE('',*,*,#238000,.T.); +#238000 = EDGE_CURVE('',#237993,#238001,#238003,.T.); +#238001 = VERTEX_POINT('',#238002); +#238002 = CARTESIAN_POINT('',(109.87165,-52.7231,1.585)); +#238003 = LINE('',#238004,#238005); +#238004 = CARTESIAN_POINT('',(109.87165,-47.6531,1.585)); +#238005 = VECTOR('',#238006,1.); +#238006 = DIRECTION('',(0.,-1.,0.)); +#238007 = ORIENTED_EDGE('',*,*,#238008,.T.); +#238008 = EDGE_CURVE('',#238001,#237983,#238009,.T.); +#238009 = LINE('',#238010,#238011); +#238010 = CARTESIAN_POINT('',(109.87165,-52.7231,1.585)); +#238011 = VECTOR('',#238012,1.); +#238012 = DIRECTION('',(1.,0.,0.)); +#238013 = PLANE('',#238014); +#238014 = AXIS2_PLACEMENT_3D('',#238015,#238016,#238017); +#238015 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238016 = DIRECTION('',(0.,0.,1.)); +#238017 = DIRECTION('',(1.,0.,-0.)); +#238018 = SHELL_BASED_SURFACE_MODEL('',(#238019)); +#238019 = OPEN_SHELL('',(#238020)); +#238020 = ADVANCED_FACE('',(#238021),#238107,.T.); +#238021 = FACE_BOUND('',#238022,.F.); +#238022 = EDGE_LOOP('',(#238023,#238034,#238042,#238051,#238059,#238067, + #238076,#238084,#238093,#238101)); +#238023 = ORIENTED_EDGE('',*,*,#238024,.T.); +#238024 = EDGE_CURVE('',#238025,#238027,#238029,.T.); +#238025 = VERTEX_POINT('',#238026); +#238026 = CARTESIAN_POINT('',(119.409597,-52.307856,1.585)); +#238027 = VERTEX_POINT('',#238028); +#238028 = CARTESIAN_POINT('',(119.409597,-52.177856,1.585)); +#238029 = CIRCLE('',#238030,6.500000000091E-02); +#238030 = AXIS2_PLACEMENT_3D('',#238031,#238032,#238033); +#238031 = CARTESIAN_POINT('',(119.40959734486,-52.242856,1.585)); +#238032 = DIRECTION('',(0.,0.,-1.)); +#238033 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#238034 = ORIENTED_EDGE('',*,*,#238035,.T.); +#238035 = EDGE_CURVE('',#238027,#238036,#238038,.T.); +#238036 = VERTEX_POINT('',#238037); +#238037 = CARTESIAN_POINT('',(120.309597,-52.177856,1.585)); +#238038 = LINE('',#238039,#238040); +#238039 = CARTESIAN_POINT('',(119.409597,-52.177856,1.585)); +#238040 = VECTOR('',#238041,1.); +#238041 = DIRECTION('',(1.,0.,0.)); +#238042 = ORIENTED_EDGE('',*,*,#238043,.T.); +#238043 = EDGE_CURVE('',#238036,#238044,#238046,.T.); +#238044 = VERTEX_POINT('',#238045); +#238045 = CARTESIAN_POINT('',(120.341846,-52.299292,1.585)); +#238046 = CIRCLE('',#238047,6.500021194142E-02); +#238047 = AXIS2_PLACEMENT_3D('',#238048,#238049,#238050); +#238048 = CARTESIAN_POINT('',(120.30959651351,-52.24285621194,1.585)); +#238049 = DIRECTION('',(0.,0.,-1.)); +#238050 = DIRECTION('',(7.484332334091E-06,0.999999999972,0.)); +#238051 = ORIENTED_EDGE('',*,*,#238052,.T.); +#238052 = EDGE_CURVE('',#238044,#238053,#238055,.T.); +#238053 = VERTEX_POINT('',#238054); +#238054 = CARTESIAN_POINT('',(119.654359,-52.692142,1.585)); +#238055 = LINE('',#238056,#238057); +#238056 = CARTESIAN_POINT('',(120.341846,-52.299292,1.585)); +#238057 = VECTOR('',#238058,1.); +#238058 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#238059 = ORIENTED_EDGE('',*,*,#238060,.T.); +#238060 = EDGE_CURVE('',#238053,#238061,#238063,.T.); +#238061 = VERTEX_POINT('',#238062); +#238062 = CARTESIAN_POINT('',(120.309597,-52.692142,1.585)); +#238063 = LINE('',#238064,#238065); +#238064 = CARTESIAN_POINT('',(119.654359,-52.692142,1.585)); +#238065 = VECTOR('',#238066,1.); +#238066 = DIRECTION('',(1.,0.,0.)); +#238067 = ORIENTED_EDGE('',*,*,#238068,.T.); +#238068 = EDGE_CURVE('',#238061,#238069,#238071,.T.); +#238069 = VERTEX_POINT('',#238070); +#238070 = CARTESIAN_POINT('',(120.309597,-52.822142,1.585)); +#238071 = CIRCLE('',#238072,6.500000000092E-02); +#238072 = AXIS2_PLACEMENT_3D('',#238073,#238074,#238075); +#238073 = CARTESIAN_POINT('',(120.30959665513,-52.757142,1.585)); +#238074 = DIRECTION('',(0.,0.,-1.)); +#238075 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#238076 = ORIENTED_EDGE('',*,*,#238077,.T.); +#238077 = EDGE_CURVE('',#238069,#238078,#238080,.T.); +#238078 = VERTEX_POINT('',#238079); +#238079 = CARTESIAN_POINT('',(119.409597,-52.822142,1.585)); +#238080 = LINE('',#238081,#238082); +#238081 = CARTESIAN_POINT('',(120.309597,-52.822142,1.585)); +#238082 = VECTOR('',#238083,1.); +#238083 = DIRECTION('',(-1.,0.,0.)); +#238084 = ORIENTED_EDGE('',*,*,#238085,.T.); +#238085 = EDGE_CURVE('',#238078,#238086,#238088,.T.); +#238086 = VERTEX_POINT('',#238087); +#238087 = CARTESIAN_POINT('',(119.377348,-52.700706,1.585)); +#238088 = CIRCLE('',#238089,6.500021194142E-02); +#238089 = AXIS2_PLACEMENT_3D('',#238090,#238091,#238092); +#238090 = CARTESIAN_POINT('',(119.40959748648,-52.75714178806,1.585)); +#238091 = DIRECTION('',(0.,0.,-1.)); +#238092 = DIRECTION('',(-7.48433233409E-06,-0.999999999972,-0.)); +#238093 = ORIENTED_EDGE('',*,*,#238094,.T.); +#238094 = EDGE_CURVE('',#238086,#238095,#238097,.T.); +#238095 = VERTEX_POINT('',#238096); +#238096 = CARTESIAN_POINT('',(120.064835,-52.307856,1.585)); +#238097 = LINE('',#238098,#238099); +#238098 = CARTESIAN_POINT('',(119.377348,-52.700706,1.585)); +#238099 = VECTOR('',#238100,1.); +#238100 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#238101 = ORIENTED_EDGE('',*,*,#238102,.T.); +#238102 = EDGE_CURVE('',#238095,#238025,#238103,.T.); +#238103 = LINE('',#238104,#238105); +#238104 = CARTESIAN_POINT('',(120.064835,-52.307856,1.585)); +#238105 = VECTOR('',#238106,1.); +#238106 = DIRECTION('',(-1.,0.,0.)); +#238107 = PLANE('',#238108); +#238108 = AXIS2_PLACEMENT_3D('',#238109,#238110,#238111); +#238109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238110 = DIRECTION('',(0.,0.,1.)); +#238111 = DIRECTION('',(1.,0.,-0.)); +#238112 = SHELL_BASED_SURFACE_MODEL('',(#238113)); +#238113 = OPEN_SHELL('',(#238114)); +#238114 = ADVANCED_FACE('',(#238115),#238387,.T.); +#238115 = FACE_BOUND('',#238116,.F.); +#238116 = EDGE_LOOP('',(#238117,#238128,#238136,#238144,#238153,#238161, + #238169,#238177,#238185,#238193,#238201,#238209,#238218,#238226, + #238234,#238242,#238250,#238258,#238267,#238275,#238283,#238292, + #238300,#238308,#238316,#238324,#238332,#238340,#238348,#238357, + #238365,#238373,#238381)); +#238117 = ORIENTED_EDGE('',*,*,#238118,.T.); +#238118 = EDGE_CURVE('',#238119,#238121,#238123,.T.); +#238119 = VERTEX_POINT('',#238120); +#238120 = CARTESIAN_POINT('',(129.54079,-52.208015,1.585)); +#238121 = VERTEX_POINT('',#238122); +#238122 = CARTESIAN_POINT('',(129.664119,-52.249124,1.585)); +#238123 = CIRCLE('',#238124,6.499998485139E-02); +#238124 = AXIS2_PLACEMENT_3D('',#238125,#238126,#238127); +#238125 = CARTESIAN_POINT('',(129.60245436584,-52.22856990248,1.585)); +#238126 = DIRECTION('',(0.,0.,-1.)); +#238127 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#238128 = ORIENTED_EDGE('',*,*,#238129,.T.); +#238129 = EDGE_CURVE('',#238121,#238130,#238132,.T.); +#238130 = VERTEX_POINT('',#238131); +#238131 = CARTESIAN_POINT('',(129.624597,-52.367689,1.585)); +#238132 = LINE('',#238133,#238134); +#238133 = CARTESIAN_POINT('',(129.664119,-52.249124,1.585)); +#238134 = VECTOR('',#238135,1.); +#238135 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#238136 = ORIENTED_EDGE('',*,*,#238137,.T.); +#238137 = EDGE_CURVE('',#238130,#238138,#238140,.T.); +#238138 = VERTEX_POINT('',#238139); +#238139 = CARTESIAN_POINT('',(129.624597,-52.556082,1.585)); +#238140 = LINE('',#238141,#238142); +#238141 = CARTESIAN_POINT('',(129.624597,-52.367689,1.585)); +#238142 = VECTOR('',#238143,1.); +#238143 = DIRECTION('',(0.,-1.,0.)); +#238144 = ORIENTED_EDGE('',*,*,#238145,.T.); +#238145 = EDGE_CURVE('',#238138,#238146,#238148,.T.); +#238146 = VERTEX_POINT('',#238147); +#238147 = CARTESIAN_POINT('',(129.74637,-52.677856,1.585)); +#238148 = CIRCLE('',#238149,0.170995888391); +#238149 = AXIS2_PLACEMENT_3D('',#238150,#238151,#238152); +#238150 = CARTESIAN_POINT('',(129.7899473225,-52.51250603534,1.585)); +#238151 = DIRECTION('',(0.,0.,1.)); +#238152 = DIRECTION('',(-0.966984200949,-0.254836330051,0.)); +#238153 = ORIENTED_EDGE('',*,*,#238154,.T.); +#238154 = EDGE_CURVE('',#238146,#238155,#238157,.T.); +#238155 = VERTEX_POINT('',#238156); +#238156 = CARTESIAN_POINT('',(129.801395,-52.677856,1.585)); +#238157 = LINE('',#238158,#238159); +#238158 = CARTESIAN_POINT('',(129.74637,-52.677856,1.585)); +#238159 = VECTOR('',#238160,1.); +#238160 = DIRECTION('',(1.,0.,0.)); +#238161 = ORIENTED_EDGE('',*,*,#238162,.T.); +#238162 = EDGE_CURVE('',#238155,#238163,#238165,.T.); +#238163 = VERTEX_POINT('',#238164); +#238164 = CARTESIAN_POINT('',(129.863951,-52.646578,1.585)); +#238165 = LINE('',#238166,#238167); +#238166 = CARTESIAN_POINT('',(129.801395,-52.677856,1.585)); +#238167 = VECTOR('',#238168,1.); +#238168 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#238169 = ORIENTED_EDGE('',*,*,#238170,.T.); +#238170 = EDGE_CURVE('',#238163,#238171,#238173,.T.); +#238171 = VERTEX_POINT('',#238172); +#238172 = CARTESIAN_POINT('',(129.891889,-52.618639,1.585)); +#238173 = LINE('',#238174,#238175); +#238174 = CARTESIAN_POINT('',(129.863951,-52.646578,1.585)); +#238175 = VECTOR('',#238176,1.); +#238176 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#238177 = ORIENTED_EDGE('',*,*,#238178,.T.); +#238178 = EDGE_CURVE('',#238171,#238179,#238181,.T.); +#238179 = VERTEX_POINT('',#238180); +#238180 = CARTESIAN_POINT('',(129.926839,-52.548738,1.585)); +#238181 = LINE('',#238182,#238183); +#238182 = CARTESIAN_POINT('',(129.891889,-52.618639,1.585)); +#238183 = VECTOR('',#238184,1.); +#238184 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#238185 = ORIENTED_EDGE('',*,*,#238186,.T.); +#238186 = EDGE_CURVE('',#238179,#238187,#238189,.T.); +#238187 = VERTEX_POINT('',#238188); +#238188 = CARTESIAN_POINT('',(129.972887,-52.37093,1.585)); +#238189 = LINE('',#238190,#238191); +#238190 = CARTESIAN_POINT('',(129.926839,-52.548738,1.585)); +#238191 = VECTOR('',#238192,1.); +#238192 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#238193 = ORIENTED_EDGE('',*,*,#238194,.T.); +#238194 = EDGE_CURVE('',#238187,#238195,#238197,.T.); +#238195 = VERTEX_POINT('',#238196); +#238196 = CARTESIAN_POINT('',(130.02792,-52.268323,1.585)); +#238197 = LINE('',#238198,#238199); +#238198 = CARTESIAN_POINT('',(129.972887,-52.37093,1.585)); +#238199 = VECTOR('',#238200,1.); +#238200 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#238201 = ORIENTED_EDGE('',*,*,#238202,.T.); +#238202 = EDGE_CURVE('',#238195,#238203,#238205,.T.); +#238203 = VERTEX_POINT('',#238204); +#238204 = CARTESIAN_POINT('',(130.087671,-52.213289,1.585)); +#238205 = LINE('',#238206,#238207); +#238206 = CARTESIAN_POINT('',(130.02792,-52.268323,1.585)); +#238207 = VECTOR('',#238208,1.); +#238208 = DIRECTION('',(0.735543975152,0.677476981615,0.)); +#238209 = ORIENTED_EDGE('',*,*,#238210,.T.); +#238210 = EDGE_CURVE('',#238203,#238211,#238213,.T.); +#238211 = VERTEX_POINT('',#238212); +#238212 = CARTESIAN_POINT('',(130.317237,-52.170432,1.585)); +#238213 = CIRCLE('',#238214,0.258971949836); +#238214 = AXIS2_PLACEMENT_3D('',#238215,#238216,#238217); +#238215 = CARTESIAN_POINT('',(130.24487456064,-52.41908868736,1.585)); +#238216 = DIRECTION('',(0.,0.,-1.)); +#238217 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#238218 = ORIENTED_EDGE('',*,*,#238219,.T.); +#238219 = EDGE_CURVE('',#238211,#238220,#238222,.T.); +#238220 = VERTEX_POINT('',#238221); +#238221 = CARTESIAN_POINT('',(130.419844,-52.225465,1.585)); +#238222 = LINE('',#238223,#238224); +#238223 = CARTESIAN_POINT('',(130.317237,-52.170432,1.585)); +#238224 = VECTOR('',#238225,1.); +#238225 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#238226 = ORIENTED_EDGE('',*,*,#238227,.T.); +#238227 = EDGE_CURVE('',#238220,#238228,#238230,.T.); +#238228 = VERTEX_POINT('',#238229); +#238229 = CARTESIAN_POINT('',(130.474878,-52.285216,1.585)); +#238230 = LINE('',#238231,#238232); +#238231 = CARTESIAN_POINT('',(130.419844,-52.225465,1.585)); +#238232 = VECTOR('',#238233,1.); +#238233 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#238234 = ORIENTED_EDGE('',*,*,#238235,.T.); +#238235 = EDGE_CURVE('',#238228,#238236,#238238,.T.); +#238236 = VERTEX_POINT('',#238237); +#238237 = CARTESIAN_POINT('',(130.521681,-52.385342,1.585)); +#238238 = LINE('',#238239,#238240); +#238239 = CARTESIAN_POINT('',(130.474878,-52.285216,1.585)); +#238240 = VECTOR('',#238241,1.); +#238241 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#238242 = ORIENTED_EDGE('',*,*,#238243,.T.); +#238243 = EDGE_CURVE('',#238236,#238244,#238246,.T.); +#238244 = VERTEX_POINT('',#238245); +#238245 = CARTESIAN_POINT('',(130.522563,-52.624507,1.585)); +#238246 = LINE('',#238247,#238248); +#238247 = CARTESIAN_POINT('',(130.521681,-52.385342,1.585)); +#238248 = VECTOR('',#238249,1.); +#238249 = DIRECTION('',(3.687805500009E-03,-0.999993200022,0.)); +#238250 = ORIENTED_EDGE('',*,*,#238251,.T.); +#238251 = EDGE_CURVE('',#238244,#238252,#238254,.T.); +#238252 = VERTEX_POINT('',#238253); +#238253 = CARTESIAN_POINT('',(130.478404,-52.763411,1.585)); +#238254 = LINE('',#238255,#238256); +#238255 = CARTESIAN_POINT('',(130.522563,-52.624507,1.585)); +#238256 = VECTOR('',#238257,1.); +#238257 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#238258 = ORIENTED_EDGE('',*,*,#238259,.T.); +#238259 = EDGE_CURVE('',#238252,#238260,#238262,.T.); +#238260 = VERTEX_POINT('',#238261); +#238261 = CARTESIAN_POINT('',(130.355076,-52.722301,1.585)); +#238262 = CIRCLE('',#238263,6.499966862259E-02); +#238263 = AXIS2_PLACEMENT_3D('',#238264,#238265,#238266); +#238264 = CARTESIAN_POINT('',(130.41674006734,-52.74285579797,1.585)); +#238265 = DIRECTION('',(-0.,0.,-1.)); +#238266 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#238267 = ORIENTED_EDGE('',*,*,#238268,.T.); +#238268 = EDGE_CURVE('',#238260,#238269,#238271,.T.); +#238269 = VERTEX_POINT('',#238270); +#238270 = CARTESIAN_POINT('',(130.394597,-52.603738,1.585)); +#238271 = LINE('',#238272,#238273); +#238272 = CARTESIAN_POINT('',(130.355076,-52.722301,1.585)); +#238273 = VECTOR('',#238274,1.); +#238274 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#238275 = ORIENTED_EDGE('',*,*,#238276,.T.); +#238276 = EDGE_CURVE('',#238269,#238277,#238279,.T.); +#238277 = VERTEX_POINT('',#238278); +#238278 = CARTESIAN_POINT('',(130.394597,-52.415344,1.585)); +#238279 = LINE('',#238280,#238281); +#238280 = CARTESIAN_POINT('',(130.394597,-52.603738,1.585)); +#238281 = VECTOR('',#238282,1.); +#238282 = DIRECTION('',(0.,1.,0.)); +#238283 = ORIENTED_EDGE('',*,*,#238284,.T.); +#238284 = EDGE_CURVE('',#238277,#238285,#238287,.T.); +#238285 = VERTEX_POINT('',#238286); +#238286 = CARTESIAN_POINT('',(130.272823,-52.29357,1.585)); +#238287 = CIRCLE('',#238288,0.170999251022); +#238288 = AXIS2_PLACEMENT_3D('',#238289,#238290,#238291); +#238289 = CARTESIAN_POINT('',(130.229244,-52.458923,1.585)); +#238290 = DIRECTION('',(0.,0.,1.)); +#238291 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#238292 = ORIENTED_EDGE('',*,*,#238293,.T.); +#238293 = EDGE_CURVE('',#238285,#238294,#238296,.T.); +#238294 = VERTEX_POINT('',#238295); +#238295 = CARTESIAN_POINT('',(130.217799,-52.29357,1.585)); +#238296 = LINE('',#238297,#238298); +#238297 = CARTESIAN_POINT('',(130.272823,-52.29357,1.585)); +#238298 = VECTOR('',#238299,1.); +#238299 = DIRECTION('',(-1.,0.,0.)); +#238300 = ORIENTED_EDGE('',*,*,#238301,.T.); +#238301 = EDGE_CURVE('',#238294,#238302,#238304,.T.); +#238302 = VERTEX_POINT('',#238303); +#238303 = CARTESIAN_POINT('',(130.155243,-52.324848,1.585)); +#238304 = LINE('',#238305,#238306); +#238305 = CARTESIAN_POINT('',(130.217799,-52.29357,1.585)); +#238306 = VECTOR('',#238307,1.); +#238307 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#238308 = ORIENTED_EDGE('',*,*,#238309,.T.); +#238309 = EDGE_CURVE('',#238302,#238310,#238312,.T.); +#238310 = VERTEX_POINT('',#238311); +#238311 = CARTESIAN_POINT('',(130.127303,-52.352788,1.585)); +#238312 = LINE('',#238313,#238314); +#238313 = CARTESIAN_POINT('',(130.155243,-52.324848,1.585)); +#238314 = VECTOR('',#238315,1.); +#238315 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#238316 = ORIENTED_EDGE('',*,*,#238317,.T.); +#238317 = EDGE_CURVE('',#238310,#238318,#238320,.T.); +#238318 = VERTEX_POINT('',#238319); +#238319 = CARTESIAN_POINT('',(130.092353,-52.422688,1.585)); +#238320 = LINE('',#238321,#238322); +#238321 = CARTESIAN_POINT('',(130.127303,-52.352788,1.585)); +#238322 = VECTOR('',#238323,1.); +#238323 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#238324 = ORIENTED_EDGE('',*,*,#238325,.T.); +#238325 = EDGE_CURVE('',#238318,#238326,#238328,.T.); +#238326 = VERTEX_POINT('',#238327); +#238327 = CARTESIAN_POINT('',(130.046306,-52.600496,1.585)); +#238328 = LINE('',#238329,#238330); +#238329 = CARTESIAN_POINT('',(130.092353,-52.422688,1.585)); +#238330 = VECTOR('',#238331,1.); +#238331 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#238332 = ORIENTED_EDGE('',*,*,#238333,.T.); +#238333 = EDGE_CURVE('',#238326,#238334,#238336,.T.); +#238334 = VERTEX_POINT('',#238335); +#238335 = CARTESIAN_POINT('',(129.991273,-52.703104,1.585)); +#238336 = LINE('',#238337,#238338); +#238337 = CARTESIAN_POINT('',(130.046306,-52.600496,1.585)); +#238338 = VECTOR('',#238339,1.); +#238339 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#238340 = ORIENTED_EDGE('',*,*,#238341,.T.); +#238341 = EDGE_CURVE('',#238334,#238342,#238344,.T.); +#238342 = VERTEX_POINT('',#238343); +#238343 = CARTESIAN_POINT('',(129.931523,-52.758137,1.585)); +#238344 = LINE('',#238345,#238346); +#238345 = CARTESIAN_POINT('',(129.991273,-52.703104,1.585)); +#238346 = VECTOR('',#238347,1.); +#238347 = DIRECTION('',(-0.73554445943,-0.677476455829,0.)); +#238348 = ORIENTED_EDGE('',*,*,#238349,.T.); +#238349 = EDGE_CURVE('',#238342,#238350,#238352,.T.); +#238350 = VERTEX_POINT('',#238351); +#238351 = CARTESIAN_POINT('',(129.608013,-52.75175,1.585)); +#238352 = CIRCLE('',#238353,0.260197694649); +#238353 = AXIS2_PLACEMENT_3D('',#238354,#238355,#238356); +#238354 = CARTESIAN_POINT('',(129.77379048924,-52.55119909783,1.585)); +#238355 = DIRECTION('',(-0.,0.,-1.)); +#238356 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#238357 = ORIENTED_EDGE('',*,*,#238358,.T.); +#238358 = EDGE_CURVE('',#238350,#238359,#238361,.T.); +#238359 = VERTEX_POINT('',#238360); +#238360 = CARTESIAN_POINT('',(129.550702,-52.694439,1.585)); +#238361 = LINE('',#238362,#238363); +#238362 = CARTESIAN_POINT('',(129.608013,-52.75175,1.585)); +#238363 = VECTOR('',#238364,1.); +#238364 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#238365 = ORIENTED_EDGE('',*,*,#238366,.T.); +#238366 = EDGE_CURVE('',#238359,#238367,#238369,.T.); +#238367 = VERTEX_POINT('',#238368); +#238368 = CARTESIAN_POINT('',(129.497512,-52.586083,1.585)); +#238369 = LINE('',#238370,#238371); +#238370 = CARTESIAN_POINT('',(129.550702,-52.694439,1.585)); +#238371 = VECTOR('',#238372,1.); +#238372 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#238373 = ORIENTED_EDGE('',*,*,#238374,.T.); +#238374 = EDGE_CURVE('',#238367,#238375,#238377,.T.); +#238375 = VERTEX_POINT('',#238376); +#238376 = CARTESIAN_POINT('',(129.49663,-52.346919,1.585)); +#238377 = LINE('',#238378,#238379); +#238378 = CARTESIAN_POINT('',(129.497512,-52.586083,1.585)); +#238379 = VECTOR('',#238380,1.); +#238380 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#238381 = ORIENTED_EDGE('',*,*,#238382,.T.); +#238382 = EDGE_CURVE('',#238375,#238119,#238383,.T.); +#238383 = LINE('',#238384,#238385); +#238384 = CARTESIAN_POINT('',(129.49663,-52.346919,1.585)); +#238385 = VECTOR('',#238386,1.); +#238386 = DIRECTION('',(0.302974833624,0.952998557287,0.)); +#238387 = PLANE('',#238388); +#238388 = AXIS2_PLACEMENT_3D('',#238389,#238390,#238391); +#238389 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238390 = DIRECTION('',(0.,0.,1.)); +#238391 = DIRECTION('',(1.,0.,-0.)); +#238392 = SHELL_BASED_SURFACE_MODEL('',(#238393)); +#238393 = OPEN_SHELL('',(#238394)); +#238394 = ADVANCED_FACE('',(#238395),#238667,.T.); +#238395 = FACE_BOUND('',#238396,.F.); +#238396 = EDGE_LOOP('',(#238397,#238408,#238416,#238424,#238433,#238441, + #238449,#238457,#238465,#238473,#238481,#238489,#238498,#238506, + #238514,#238522,#238530,#238538,#238547,#238555,#238563,#238572, + #238580,#238588,#238596,#238604,#238612,#238620,#238628,#238637, + #238645,#238653,#238661)); +#238397 = ORIENTED_EDGE('',*,*,#238398,.T.); +#238398 = EDGE_CURVE('',#238399,#238401,#238403,.T.); +#238399 = VERTEX_POINT('',#238400); +#238400 = CARTESIAN_POINT('',(116.84079,-52.19373,1.585)); +#238401 = VERTEX_POINT('',#238402); +#238402 = CARTESIAN_POINT('',(116.964119,-52.234839,1.585)); +#238403 = CIRCLE('',#238404,6.499998485138E-02); +#238404 = AXIS2_PLACEMENT_3D('',#238405,#238406,#238407); +#238405 = CARTESIAN_POINT('',(116.90245436584,-52.21428490248,1.585)); +#238406 = DIRECTION('',(0.,0.,-1.)); +#238407 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#238408 = ORIENTED_EDGE('',*,*,#238409,.T.); +#238409 = EDGE_CURVE('',#238401,#238410,#238412,.T.); +#238410 = VERTEX_POINT('',#238411); +#238411 = CARTESIAN_POINT('',(116.924597,-52.353404,1.585)); +#238412 = LINE('',#238413,#238414); +#238413 = CARTESIAN_POINT('',(116.964119,-52.234839,1.585)); +#238414 = VECTOR('',#238415,1.); +#238415 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#238416 = ORIENTED_EDGE('',*,*,#238417,.T.); +#238417 = EDGE_CURVE('',#238410,#238418,#238420,.T.); +#238418 = VERTEX_POINT('',#238419); +#238419 = CARTESIAN_POINT('',(116.924597,-52.541797,1.585)); +#238420 = LINE('',#238421,#238422); +#238421 = CARTESIAN_POINT('',(116.924597,-52.353404,1.585)); +#238422 = VECTOR('',#238423,1.); +#238423 = DIRECTION('',(0.,-1.,0.)); +#238424 = ORIENTED_EDGE('',*,*,#238425,.T.); +#238425 = EDGE_CURVE('',#238418,#238426,#238428,.T.); +#238426 = VERTEX_POINT('',#238427); +#238427 = CARTESIAN_POINT('',(117.04637,-52.663571,1.585)); +#238428 = CIRCLE('',#238429,0.170995888391); +#238429 = AXIS2_PLACEMENT_3D('',#238430,#238431,#238432); +#238430 = CARTESIAN_POINT('',(117.0899473225,-52.49822103534,1.585)); +#238431 = DIRECTION('',(0.,0.,1.)); +#238432 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#238433 = ORIENTED_EDGE('',*,*,#238434,.T.); +#238434 = EDGE_CURVE('',#238426,#238435,#238437,.T.); +#238435 = VERTEX_POINT('',#238436); +#238436 = CARTESIAN_POINT('',(117.101395,-52.663571,1.585)); +#238437 = LINE('',#238438,#238439); +#238438 = CARTESIAN_POINT('',(117.04637,-52.663571,1.585)); +#238439 = VECTOR('',#238440,1.); +#238440 = DIRECTION('',(1.,0.,0.)); +#238441 = ORIENTED_EDGE('',*,*,#238442,.T.); +#238442 = EDGE_CURVE('',#238435,#238443,#238445,.T.); +#238443 = VERTEX_POINT('',#238444); +#238444 = CARTESIAN_POINT('',(117.163951,-52.632293,1.585)); +#238445 = LINE('',#238446,#238447); +#238446 = CARTESIAN_POINT('',(117.101395,-52.663571,1.585)); +#238447 = VECTOR('',#238448,1.); +#238448 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#238449 = ORIENTED_EDGE('',*,*,#238450,.T.); +#238450 = EDGE_CURVE('',#238443,#238451,#238453,.T.); +#238451 = VERTEX_POINT('',#238452); +#238452 = CARTESIAN_POINT('',(117.191889,-52.604354,1.585)); +#238453 = LINE('',#238454,#238455); +#238454 = CARTESIAN_POINT('',(117.163951,-52.632293,1.585)); +#238455 = VECTOR('',#238456,1.); +#238456 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#238457 = ORIENTED_EDGE('',*,*,#238458,.T.); +#238458 = EDGE_CURVE('',#238451,#238459,#238461,.T.); +#238459 = VERTEX_POINT('',#238460); +#238460 = CARTESIAN_POINT('',(117.226839,-52.534453,1.585)); +#238461 = LINE('',#238462,#238463); +#238462 = CARTESIAN_POINT('',(117.191889,-52.604354,1.585)); +#238463 = VECTOR('',#238464,1.); +#238464 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#238465 = ORIENTED_EDGE('',*,*,#238466,.T.); +#238466 = EDGE_CURVE('',#238459,#238467,#238469,.T.); +#238467 = VERTEX_POINT('',#238468); +#238468 = CARTESIAN_POINT('',(117.272887,-52.356645,1.585)); +#238469 = LINE('',#238470,#238471); +#238470 = CARTESIAN_POINT('',(117.226839,-52.534453,1.585)); +#238471 = VECTOR('',#238472,1.); +#238472 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#238473 = ORIENTED_EDGE('',*,*,#238474,.T.); +#238474 = EDGE_CURVE('',#238467,#238475,#238477,.T.); +#238475 = VERTEX_POINT('',#238476); +#238476 = CARTESIAN_POINT('',(117.32792,-52.254038,1.585)); +#238477 = LINE('',#238478,#238479); +#238478 = CARTESIAN_POINT('',(117.272887,-52.356645,1.585)); +#238479 = VECTOR('',#238480,1.); +#238480 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#238481 = ORIENTED_EDGE('',*,*,#238482,.T.); +#238482 = EDGE_CURVE('',#238475,#238483,#238485,.T.); +#238483 = VERTEX_POINT('',#238484); +#238484 = CARTESIAN_POINT('',(117.387671,-52.199004,1.585)); +#238485 = LINE('',#238486,#238487); +#238486 = CARTESIAN_POINT('',(117.32792,-52.254038,1.585)); +#238487 = VECTOR('',#238488,1.); +#238488 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#238489 = ORIENTED_EDGE('',*,*,#238490,.T.); +#238490 = EDGE_CURVE('',#238483,#238491,#238493,.T.); +#238491 = VERTEX_POINT('',#238492); +#238492 = CARTESIAN_POINT('',(117.617237,-52.156147,1.585)); +#238493 = CIRCLE('',#238494,0.258971949836); +#238494 = AXIS2_PLACEMENT_3D('',#238495,#238496,#238497); +#238495 = CARTESIAN_POINT('',(117.54487456064,-52.40480368736,1.585)); +#238496 = DIRECTION('',(0.,0.,-1.)); +#238497 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#238498 = ORIENTED_EDGE('',*,*,#238499,.T.); +#238499 = EDGE_CURVE('',#238491,#238500,#238502,.T.); +#238500 = VERTEX_POINT('',#238501); +#238501 = CARTESIAN_POINT('',(117.719844,-52.21118,1.585)); +#238502 = LINE('',#238503,#238504); +#238503 = CARTESIAN_POINT('',(117.617237,-52.156147,1.585)); +#238504 = VECTOR('',#238505,1.); +#238505 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#238506 = ORIENTED_EDGE('',*,*,#238507,.T.); +#238507 = EDGE_CURVE('',#238500,#238508,#238510,.T.); +#238508 = VERTEX_POINT('',#238509); +#238509 = CARTESIAN_POINT('',(117.774878,-52.270931,1.585)); +#238510 = LINE('',#238511,#238512); +#238511 = CARTESIAN_POINT('',(117.719844,-52.21118,1.585)); +#238512 = VECTOR('',#238513,1.); +#238513 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#238514 = ORIENTED_EDGE('',*,*,#238515,.T.); +#238515 = EDGE_CURVE('',#238508,#238516,#238518,.T.); +#238516 = VERTEX_POINT('',#238517); +#238517 = CARTESIAN_POINT('',(117.821681,-52.371057,1.585)); +#238518 = LINE('',#238519,#238520); +#238519 = CARTESIAN_POINT('',(117.774878,-52.270931,1.585)); +#238520 = VECTOR('',#238521,1.); +#238521 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#238522 = ORIENTED_EDGE('',*,*,#238523,.T.); +#238523 = EDGE_CURVE('',#238516,#238524,#238526,.T.); +#238524 = VERTEX_POINT('',#238525); +#238525 = CARTESIAN_POINT('',(117.822563,-52.610222,1.585)); +#238526 = LINE('',#238527,#238528); +#238527 = CARTESIAN_POINT('',(117.821681,-52.371057,1.585)); +#238528 = VECTOR('',#238529,1.); +#238529 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#238530 = ORIENTED_EDGE('',*,*,#238531,.T.); +#238531 = EDGE_CURVE('',#238524,#238532,#238534,.T.); +#238532 = VERTEX_POINT('',#238533); +#238533 = CARTESIAN_POINT('',(117.778404,-52.749126,1.585)); +#238534 = LINE('',#238535,#238536); +#238535 = CARTESIAN_POINT('',(117.822563,-52.610222,1.585)); +#238536 = VECTOR('',#238537,1.); +#238537 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#238538 = ORIENTED_EDGE('',*,*,#238539,.T.); +#238539 = EDGE_CURVE('',#238532,#238540,#238542,.T.); +#238540 = VERTEX_POINT('',#238541); +#238541 = CARTESIAN_POINT('',(117.655076,-52.708016,1.585)); +#238542 = CIRCLE('',#238543,6.499966862258E-02); +#238543 = AXIS2_PLACEMENT_3D('',#238544,#238545,#238546); +#238544 = CARTESIAN_POINT('',(117.71674006734,-52.72857079797,1.585)); +#238545 = DIRECTION('',(-0.,0.,-1.)); +#238546 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#238547 = ORIENTED_EDGE('',*,*,#238548,.T.); +#238548 = EDGE_CURVE('',#238540,#238549,#238551,.T.); +#238549 = VERTEX_POINT('',#238550); +#238550 = CARTESIAN_POINT('',(117.694597,-52.589453,1.585)); +#238551 = LINE('',#238552,#238553); +#238552 = CARTESIAN_POINT('',(117.655076,-52.708016,1.585)); +#238553 = VECTOR('',#238554,1.); +#238554 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#238555 = ORIENTED_EDGE('',*,*,#238556,.T.); +#238556 = EDGE_CURVE('',#238549,#238557,#238559,.T.); +#238557 = VERTEX_POINT('',#238558); +#238558 = CARTESIAN_POINT('',(117.694597,-52.401059,1.585)); +#238559 = LINE('',#238560,#238561); +#238560 = CARTESIAN_POINT('',(117.694597,-52.589453,1.585)); +#238561 = VECTOR('',#238562,1.); +#238562 = DIRECTION('',(0.,1.,0.)); +#238563 = ORIENTED_EDGE('',*,*,#238564,.T.); +#238564 = EDGE_CURVE('',#238557,#238565,#238567,.T.); +#238565 = VERTEX_POINT('',#238566); +#238566 = CARTESIAN_POINT('',(117.572823,-52.279285,1.585)); +#238567 = CIRCLE('',#238568,0.170999251022); +#238568 = AXIS2_PLACEMENT_3D('',#238569,#238570,#238571); +#238569 = CARTESIAN_POINT('',(117.529244,-52.444638,1.585)); +#238570 = DIRECTION('',(0.,0.,1.)); +#238571 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#238572 = ORIENTED_EDGE('',*,*,#238573,.T.); +#238573 = EDGE_CURVE('',#238565,#238574,#238576,.T.); +#238574 = VERTEX_POINT('',#238575); +#238575 = CARTESIAN_POINT('',(117.517799,-52.279285,1.585)); +#238576 = LINE('',#238577,#238578); +#238577 = CARTESIAN_POINT('',(117.572823,-52.279285,1.585)); +#238578 = VECTOR('',#238579,1.); +#238579 = DIRECTION('',(-1.,0.,0.)); +#238580 = ORIENTED_EDGE('',*,*,#238581,.T.); +#238581 = EDGE_CURVE('',#238574,#238582,#238584,.T.); +#238582 = VERTEX_POINT('',#238583); +#238583 = CARTESIAN_POINT('',(117.455243,-52.310563,1.585)); +#238584 = LINE('',#238585,#238586); +#238585 = CARTESIAN_POINT('',(117.517799,-52.279285,1.585)); +#238586 = VECTOR('',#238587,1.); +#238587 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#238588 = ORIENTED_EDGE('',*,*,#238589,.T.); +#238589 = EDGE_CURVE('',#238582,#238590,#238592,.T.); +#238590 = VERTEX_POINT('',#238591); +#238591 = CARTESIAN_POINT('',(117.427303,-52.338503,1.585)); +#238592 = LINE('',#238593,#238594); +#238593 = CARTESIAN_POINT('',(117.455243,-52.310563,1.585)); +#238594 = VECTOR('',#238595,1.); +#238595 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#238596 = ORIENTED_EDGE('',*,*,#238597,.T.); +#238597 = EDGE_CURVE('',#238590,#238598,#238600,.T.); +#238598 = VERTEX_POINT('',#238599); +#238599 = CARTESIAN_POINT('',(117.392353,-52.408403,1.585)); +#238600 = LINE('',#238601,#238602); +#238601 = CARTESIAN_POINT('',(117.427303,-52.338503,1.585)); +#238602 = VECTOR('',#238603,1.); +#238603 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#238604 = ORIENTED_EDGE('',*,*,#238605,.T.); +#238605 = EDGE_CURVE('',#238598,#238606,#238608,.T.); +#238606 = VERTEX_POINT('',#238607); +#238607 = CARTESIAN_POINT('',(117.346306,-52.586211,1.585)); +#238608 = LINE('',#238609,#238610); +#238609 = CARTESIAN_POINT('',(117.392353,-52.408403,1.585)); +#238610 = VECTOR('',#238611,1.); +#238611 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#238612 = ORIENTED_EDGE('',*,*,#238613,.T.); +#238613 = EDGE_CURVE('',#238606,#238614,#238616,.T.); +#238614 = VERTEX_POINT('',#238615); +#238615 = CARTESIAN_POINT('',(117.291273,-52.688819,1.585)); +#238616 = LINE('',#238617,#238618); +#238617 = CARTESIAN_POINT('',(117.346306,-52.586211,1.585)); +#238618 = VECTOR('',#238619,1.); +#238619 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#238620 = ORIENTED_EDGE('',*,*,#238621,.T.); +#238621 = EDGE_CURVE('',#238614,#238622,#238624,.T.); +#238622 = VERTEX_POINT('',#238623); +#238623 = CARTESIAN_POINT('',(117.231523,-52.743852,1.585)); +#238624 = LINE('',#238625,#238626); +#238625 = CARTESIAN_POINT('',(117.291273,-52.688819,1.585)); +#238626 = VECTOR('',#238627,1.); +#238627 = DIRECTION('',(-0.73554445943,-0.677476455829,0.)); +#238628 = ORIENTED_EDGE('',*,*,#238629,.T.); +#238629 = EDGE_CURVE('',#238622,#238630,#238632,.T.); +#238630 = VERTEX_POINT('',#238631); +#238631 = CARTESIAN_POINT('',(116.908013,-52.737465,1.585)); +#238632 = CIRCLE('',#238633,0.260197694649); +#238633 = AXIS2_PLACEMENT_3D('',#238634,#238635,#238636); +#238634 = CARTESIAN_POINT('',(117.07379048924,-52.53691409783,1.585)); +#238635 = DIRECTION('',(-0.,0.,-1.)); +#238636 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#238637 = ORIENTED_EDGE('',*,*,#238638,.T.); +#238638 = EDGE_CURVE('',#238630,#238639,#238641,.T.); +#238639 = VERTEX_POINT('',#238640); +#238640 = CARTESIAN_POINT('',(116.850702,-52.680154,1.585)); +#238641 = LINE('',#238642,#238643); +#238642 = CARTESIAN_POINT('',(116.908013,-52.737465,1.585)); +#238643 = VECTOR('',#238644,1.); +#238644 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#238645 = ORIENTED_EDGE('',*,*,#238646,.T.); +#238646 = EDGE_CURVE('',#238639,#238647,#238649,.T.); +#238647 = VERTEX_POINT('',#238648); +#238648 = CARTESIAN_POINT('',(116.797512,-52.571798,1.585)); +#238649 = LINE('',#238650,#238651); +#238650 = CARTESIAN_POINT('',(116.850702,-52.680154,1.585)); +#238651 = VECTOR('',#238652,1.); +#238652 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#238653 = ORIENTED_EDGE('',*,*,#238654,.T.); +#238654 = EDGE_CURVE('',#238647,#238655,#238657,.T.); +#238655 = VERTEX_POINT('',#238656); +#238656 = CARTESIAN_POINT('',(116.79663,-52.332634,1.585)); +#238657 = LINE('',#238658,#238659); +#238658 = CARTESIAN_POINT('',(116.797512,-52.571798,1.585)); +#238659 = VECTOR('',#238660,1.); +#238660 = DIRECTION('',(-3.687820919426E-03,0.999993199965,0.)); +#238661 = ORIENTED_EDGE('',*,*,#238662,.T.); +#238662 = EDGE_CURVE('',#238655,#238399,#238663,.T.); +#238663 = LINE('',#238664,#238665); +#238664 = CARTESIAN_POINT('',(116.79663,-52.332634,1.585)); +#238665 = VECTOR('',#238666,1.); +#238666 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#238667 = PLANE('',#238668); +#238668 = AXIS2_PLACEMENT_3D('',#238669,#238670,#238671); +#238669 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238670 = DIRECTION('',(0.,0.,1.)); +#238671 = DIRECTION('',(1.,0.,-0.)); +#238672 = SHELL_BASED_SURFACE_MODEL('',(#238673)); +#238673 = OPEN_SHELL('',(#238674)); +#238674 = ADVANCED_FACE('',(#238675),#238845,.T.); +#238675 = FACE_BOUND('',#238676,.F.); +#238676 = EDGE_LOOP('',(#238677,#238688,#238696,#238705,#238713,#238722, + #238730,#238738,#238746,#238755,#238763,#238772,#238780,#238789, + #238797,#238806,#238814,#238822,#238830,#238839)); +#238677 = ORIENTED_EDGE('',*,*,#238678,.T.); +#238678 = EDGE_CURVE('',#238679,#238681,#238683,.T.); +#238679 = VERTEX_POINT('',#238680); +#238680 = CARTESIAN_POINT('',(147.379349,-52.06118,1.585)); +#238681 = VERTEX_POINT('',#238682); +#238682 = CARTESIAN_POINT('',(147.471273,-52.153104,1.585)); +#238683 = CIRCLE('',#238684,6.50000837538E-02); +#238684 = AXIS2_PLACEMENT_3D('',#238685,#238686,#238687); +#238685 = CARTESIAN_POINT('',(147.42531098493,-52.10714201506,1.585)); +#238686 = DIRECTION('',(0.,0.,-1.)); +#238687 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#238688 = ORIENTED_EDGE('',*,*,#238689,.T.); +#238689 = EDGE_CURVE('',#238681,#238690,#238692,.T.); +#238690 = VERTEX_POINT('',#238691); +#238691 = CARTESIAN_POINT('',(147.439266,-52.18511,1.585)); +#238692 = LINE('',#238693,#238694); +#238693 = CARTESIAN_POINT('',(147.471273,-52.153104,1.585)); +#238694 = VECTOR('',#238695,1.); +#238695 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#238696 = ORIENTED_EDGE('',*,*,#238697,.T.); +#238697 = EDGE_CURVE('',#238690,#238698,#238700,.T.); +#238698 = VERTEX_POINT('',#238699); +#238699 = CARTESIAN_POINT('',(147.439265,-52.457743,1.585)); +#238700 = CIRCLE('',#238701,0.272201331757); +#238701 = AXIS2_PLACEMENT_3D('',#238702,#238703,#238704); +#238702 = CARTESIAN_POINT('',(147.67487402454,-52.32142736419,1.585)); +#238703 = DIRECTION('',(0.,0.,1.)); +#238704 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#238705 = ORIENTED_EDGE('',*,*,#238706,.T.); +#238706 = EDGE_CURVE('',#238698,#238707,#238709,.T.); +#238707 = VERTEX_POINT('',#238708); +#238708 = CARTESIAN_POINT('',(147.506669,-52.525149,1.585)); +#238709 = LINE('',#238710,#238711); +#238710 = CARTESIAN_POINT('',(147.439265,-52.457743,1.585)); +#238711 = VECTOR('',#238712,1.); +#238712 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#238713 = ORIENTED_EDGE('',*,*,#238714,.T.); +#238714 = EDGE_CURVE('',#238707,#238715,#238717,.T.); +#238715 = VERTEX_POINT('',#238716); +#238716 = CARTESIAN_POINT('',(147.845881,-52.599285,1.585)); +#238717 = CIRCLE('',#238718,0.553317785495); +#238718 = AXIS2_PLACEMENT_3D('',#238719,#238720,#238721); +#238719 = CARTESIAN_POINT('',(147.7884500839,-52.04895576979,1.585)); +#238720 = DIRECTION('',(0.,0.,1.)); +#238721 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#238722 = ORIENTED_EDGE('',*,*,#238723,.T.); +#238723 = EDGE_CURVE('',#238715,#238724,#238726,.T.); +#238724 = VERTEX_POINT('',#238725); +#238725 = CARTESIAN_POINT('',(148.002622,-52.560099,1.585)); +#238726 = LINE('',#238727,#238728); +#238727 = CARTESIAN_POINT('',(147.845881,-52.599285,1.585)); +#238728 = VECTOR('',#238729,1.); +#238729 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#238730 = ORIENTED_EDGE('',*,*,#238731,.T.); +#238731 = EDGE_CURVE('',#238724,#238732,#238734,.T.); +#238732 = VERTEX_POINT('',#238733); +#238733 = CARTESIAN_POINT('',(148.072522,-52.52515,1.585)); +#238734 = LINE('',#238735,#238736); +#238735 = CARTESIAN_POINT('',(148.002622,-52.560099,1.585)); +#238736 = VECTOR('',#238737,1.); +#238737 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#238738 = ORIENTED_EDGE('',*,*,#238739,.T.); +#238739 = EDGE_CURVE('',#238732,#238740,#238742,.T.); +#238740 = VERTEX_POINT('',#238741); +#238741 = CARTESIAN_POINT('',(148.139928,-52.457743,1.585)); +#238742 = LINE('',#238743,#238744); +#238743 = CARTESIAN_POINT('',(148.072522,-52.52515,1.585)); +#238744 = VECTOR('',#238745,1.); +#238745 = DIRECTION('',(0.707101536074,0.70711202626,0.)); +#238746 = ORIENTED_EDGE('',*,*,#238747,.T.); +#238747 = EDGE_CURVE('',#238740,#238748,#238750,.T.); +#238748 = VERTEX_POINT('',#238749); +#238749 = CARTESIAN_POINT('',(148.139928,-52.185111,1.585)); +#238750 = CIRCLE('',#238751,0.272194686174); +#238751 = AXIS2_PLACEMENT_3D('',#238752,#238753,#238754); +#238752 = CARTESIAN_POINT('',(147.90432686391,-52.321427,1.585)); +#238753 = DIRECTION('',(0.,-0.,1.)); +#238754 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#238755 = ORIENTED_EDGE('',*,*,#238756,.T.); +#238756 = EDGE_CURVE('',#238748,#238757,#238759,.T.); +#238757 = VERTEX_POINT('',#238758); +#238758 = CARTESIAN_POINT('',(148.107921,-52.153104,1.585)); +#238759 = LINE('',#238760,#238761); +#238760 = CARTESIAN_POINT('',(148.139928,-52.185111,1.585)); +#238761 = VECTOR('',#238762,1.); +#238762 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#238763 = ORIENTED_EDGE('',*,*,#238764,.T.); +#238764 = EDGE_CURVE('',#238757,#238765,#238767,.T.); +#238765 = VERTEX_POINT('',#238766); +#238766 = CARTESIAN_POINT('',(148.199843,-52.06118,1.585)); +#238767 = CIRCLE('',#238768,6.499937665169E-02); +#238768 = AXIS2_PLACEMENT_3D('',#238769,#238770,#238771); +#238769 = CARTESIAN_POINT('',(148.15388176676,-52.10714176677,1.585)); +#238770 = DIRECTION('',(0.,0.,-1.)); +#238771 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#238772 = ORIENTED_EDGE('',*,*,#238773,.T.); +#238773 = EDGE_CURVE('',#238765,#238774,#238776,.T.); +#238774 = VERTEX_POINT('',#238775); +#238775 = CARTESIAN_POINT('',(148.251003,-52.116461,1.585)); +#238776 = LINE('',#238777,#238778); +#238777 = CARTESIAN_POINT('',(148.199843,-52.06118,1.585)); +#238778 = VECTOR('',#238779,1.); +#238779 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#238780 = ORIENTED_EDGE('',*,*,#238781,.T.); +#238781 = EDGE_CURVE('',#238774,#238782,#238784,.T.); +#238782 = VERTEX_POINT('',#238783); +#238783 = CARTESIAN_POINT('',(148.250999,-52.526399,1.585)); +#238784 = CIRCLE('',#238785,0.409312568567); +#238785 = AXIS2_PLACEMENT_3D('',#238786,#238787,#238788); +#238786 = CARTESIAN_POINT('',(147.89670664806,-52.32142654294,1.585)); +#238787 = DIRECTION('',(0.,0.,-1.)); +#238788 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#238789 = ORIENTED_EDGE('',*,*,#238790,.T.); +#238790 = EDGE_CURVE('',#238782,#238791,#238793,.T.); +#238791 = VERTEX_POINT('',#238792); +#238792 = CARTESIAN_POINT('',(148.148322,-52.630322,1.585)); +#238793 = LINE('',#238794,#238795); +#238794 = CARTESIAN_POINT('',(148.250999,-52.526399,1.585)); +#238795 = VECTOR('',#238796,1.); +#238796 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#238797 = ORIENTED_EDGE('',*,*,#238798,.T.); +#238798 = EDGE_CURVE('',#238791,#238799,#238801,.T.); +#238799 = VERTEX_POINT('',#238800); +#238800 = CARTESIAN_POINT('',(147.709546,-52.727344,1.585)); +#238801 = CIRCLE('',#238802,0.675422176574); +#238802 = AXIS2_PLACEMENT_3D('',#238803,#238804,#238805); +#238803 = CARTESIAN_POINT('',(147.79141275007,-52.05690164465,1.585)); +#238804 = DIRECTION('',(0.,0.,-1.)); +#238805 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#238806 = ORIENTED_EDGE('',*,*,#238807,.T.); +#238807 = EDGE_CURVE('',#238799,#238808,#238810,.T.); +#238808 = VERTEX_POINT('',#238809); +#238809 = CARTESIAN_POINT('',(147.524813,-52.679566,1.585)); +#238810 = LINE('',#238811,#238812); +#238811 = CARTESIAN_POINT('',(147.709546,-52.727344,1.585)); +#238812 = VECTOR('',#238813,1.); +#238813 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#238814 = ORIENTED_EDGE('',*,*,#238815,.T.); +#238815 = EDGE_CURVE('',#238808,#238816,#238818,.T.); +#238816 = VERTEX_POINT('',#238817); +#238817 = CARTESIAN_POINT('',(147.422206,-52.624533,1.585)); +#238818 = LINE('',#238819,#238820); +#238819 = CARTESIAN_POINT('',(147.524813,-52.679566,1.585)); +#238820 = VECTOR('',#238821,1.); +#238821 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#238822 = ORIENTED_EDGE('',*,*,#238823,.T.); +#238823 = EDGE_CURVE('',#238816,#238824,#238826,.T.); +#238824 = VERTEX_POINT('',#238825); +#238825 = CARTESIAN_POINT('',(147.328191,-52.526395,1.585)); +#238826 = LINE('',#238827,#238828); +#238827 = CARTESIAN_POINT('',(147.422206,-52.624533,1.585)); +#238828 = VECTOR('',#238829,1.); +#238829 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#238830 = ORIENTED_EDGE('',*,*,#238831,.T.); +#238831 = EDGE_CURVE('',#238824,#238832,#238834,.T.); +#238832 = VERTEX_POINT('',#238833); +#238833 = CARTESIAN_POINT('',(147.328194,-52.116455,1.585)); +#238834 = CIRCLE('',#238835,0.409312909751); +#238835 = AXIS2_PLACEMENT_3D('',#238836,#238837,#238838); +#238836 = CARTESIAN_POINT('',(147.68248666757,-52.32142759277,1.585)); +#238837 = DIRECTION('',(0.,0.,-1.)); +#238838 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#238839 = ORIENTED_EDGE('',*,*,#238840,.T.); +#238840 = EDGE_CURVE('',#238832,#238679,#238841,.T.); +#238841 = LINE('',#238842,#238843); +#238842 = CARTESIAN_POINT('',(147.328194,-52.116455,1.585)); +#238843 = VECTOR('',#238844,1.); +#238844 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#238845 = PLANE('',#238846); +#238846 = AXIS2_PLACEMENT_3D('',#238847,#238848,#238849); +#238847 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238848 = DIRECTION('',(0.,0.,1.)); +#238849 = DIRECTION('',(1.,0.,-0.)); +#238850 = SHELL_BASED_SURFACE_MODEL('',(#238851)); +#238851 = OPEN_SHELL('',(#238852)); +#238852 = ADVANCED_FACE('',(#238853),#238930,.T.); +#238853 = FACE_BOUND('',#238854,.F.); +#238854 = EDGE_LOOP('',(#238855,#238866,#238874,#238882,#238891,#238899, + #238907,#238916,#238924)); +#238855 = ORIENTED_EDGE('',*,*,#238856,.T.); +#238856 = EDGE_CURVE('',#238857,#238859,#238861,.T.); +#238857 = VERTEX_POINT('',#238858); +#238858 = CARTESIAN_POINT('',(124.419545,-52.089411,1.585)); +#238859 = VERTEX_POINT('',#238860); +#238860 = CARTESIAN_POINT('',(124.544597,-52.114285,1.585)); +#238861 = CIRCLE('',#238862,6.499988811648E-02); +#238862 = AXIS2_PLACEMENT_3D('',#238863,#238864,#238865); +#238863 = CARTESIAN_POINT('',(124.47959711188,-52.1142852701,1.585)); +#238864 = DIRECTION('',(0.,0.,-1.)); +#238865 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#238866 = ORIENTED_EDGE('',*,*,#238867,.T.); +#238867 = EDGE_CURVE('',#238859,#238868,#238870,.T.); +#238868 = VERTEX_POINT('',#238869); +#238869 = CARTESIAN_POINT('',(124.544597,-52.306427,1.585)); +#238870 = LINE('',#238871,#238872); +#238871 = CARTESIAN_POINT('',(124.544597,-52.114285,1.585)); +#238872 = VECTOR('',#238873,1.); +#238873 = DIRECTION('',(0.,-1.,0.)); +#238874 = ORIENTED_EDGE('',*,*,#238875,.T.); +#238875 = EDGE_CURVE('',#238868,#238876,#238878,.T.); +#238876 = VERTEX_POINT('',#238877); +#238877 = CARTESIAN_POINT('',(125.379597,-52.306427,1.585)); +#238878 = LINE('',#238879,#238880); +#238879 = CARTESIAN_POINT('',(124.544597,-52.306427,1.585)); +#238880 = VECTOR('',#238881,1.); +#238881 = DIRECTION('',(1.,0.,0.)); +#238882 = ORIENTED_EDGE('',*,*,#238883,.T.); +#238883 = EDGE_CURVE('',#238876,#238884,#238886,.T.); +#238884 = VERTEX_POINT('',#238885); +#238885 = CARTESIAN_POINT('',(125.379597,-52.436427,1.585)); +#238886 = CIRCLE('',#238887,6.500000000091E-02); +#238887 = AXIS2_PLACEMENT_3D('',#238888,#238889,#238890); +#238888 = CARTESIAN_POINT('',(125.37959665513,-52.371427,1.585)); +#238889 = DIRECTION('',(0.,0.,-1.)); +#238890 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#238891 = ORIENTED_EDGE('',*,*,#238892,.T.); +#238892 = EDGE_CURVE('',#238884,#238893,#238895,.T.); +#238893 = VERTEX_POINT('',#238894); +#238894 = CARTESIAN_POINT('',(124.544597,-52.436427,1.585)); +#238895 = LINE('',#238896,#238897); +#238896 = CARTESIAN_POINT('',(125.379597,-52.436427,1.585)); +#238897 = VECTOR('',#238898,1.); +#238898 = DIRECTION('',(-1.,0.,0.)); +#238899 = ORIENTED_EDGE('',*,*,#238900,.T.); +#238900 = EDGE_CURVE('',#238893,#238901,#238903,.T.); +#238901 = VERTEX_POINT('',#238902); +#238902 = CARTESIAN_POINT('',(124.544597,-52.62857,1.585)); +#238903 = LINE('',#238904,#238905); +#238904 = CARTESIAN_POINT('',(124.544597,-52.436427,1.585)); +#238905 = VECTOR('',#238906,1.); +#238906 = DIRECTION('',(0.,-1.,0.)); +#238907 = ORIENTED_EDGE('',*,*,#238908,.T.); +#238908 = EDGE_CURVE('',#238901,#238909,#238911,.T.); +#238909 = VERTEX_POINT('',#238910); +#238910 = CARTESIAN_POINT('',(124.414597,-52.62857,1.585)); +#238911 = CIRCLE('',#238912,6.500000000091E-02); +#238912 = AXIS2_PLACEMENT_3D('',#238913,#238914,#238915); +#238913 = CARTESIAN_POINT('',(124.479597,-52.62856965513,1.585)); +#238914 = DIRECTION('',(-0.,0.,-1.)); +#238915 = DIRECTION('',(0.999999999986,-5.305658134982E-06,-0.)); +#238916 = ORIENTED_EDGE('',*,*,#238917,.T.); +#238917 = EDGE_CURVE('',#238909,#238918,#238920,.T.); +#238918 = VERTEX_POINT('',#238919); +#238919 = CARTESIAN_POINT('',(124.414597,-52.114285,1.585)); +#238920 = LINE('',#238921,#238922); +#238921 = CARTESIAN_POINT('',(124.414597,-52.62857,1.585)); +#238922 = VECTOR('',#238923,1.); +#238923 = DIRECTION('',(0.,1.,0.)); +#238924 = ORIENTED_EDGE('',*,*,#238925,.T.); +#238925 = EDGE_CURVE('',#238918,#238857,#238926,.T.); +#238926 = LINE('',#238927,#238928); +#238927 = CARTESIAN_POINT('',(124.414597,-52.114285,1.585)); +#238928 = VECTOR('',#238929,1.); +#238929 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#238930 = PLANE('',#238931); +#238931 = AXIS2_PLACEMENT_3D('',#238932,#238933,#238934); +#238932 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238933 = DIRECTION('',(0.,0.,1.)); +#238934 = DIRECTION('',(1.,0.,-0.)); +#238935 = SHELL_BASED_SURFACE_MODEL('',(#238936)); +#238936 = OPEN_SHELL('',(#238937)); +#238937 = ADVANCED_FACE('',(#238938,#239072),#239131,.T.); +#238938 = FACE_BOUND('',#238939,.F.); +#238939 = EDGE_LOOP('',(#238940,#238951,#238959,#238967,#238975,#238983, + #238991,#239000,#239008,#239016,#239024,#239033,#239041,#239050, + #239058,#239066)); +#238940 = ORIENTED_EDGE('',*,*,#238941,.T.); +#238941 = EDGE_CURVE('',#238942,#238944,#238946,.T.); +#238942 = VERTEX_POINT('',#238943); +#238943 = CARTESIAN_POINT('',(127.108013,-51.933961,1.585)); +#238944 = VERTEX_POINT('',#238945); +#238945 = CARTESIAN_POINT('',(127.388666,-51.884718,1.585)); +#238946 = CIRCLE('',#238947,0.327183487819); +#238947 = AXIS2_PLACEMENT_3D('',#238948,#238949,#238950); +#238948 = CARTESIAN_POINT('',(127.29924076591,-52.19944353472,1.585)); +#238949 = DIRECTION('',(0.,0.,-1.)); +#238950 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#238951 = ORIENTED_EDGE('',*,*,#238952,.T.); +#238952 = EDGE_CURVE('',#238944,#238953,#238955,.T.); +#238953 = VERTEX_POINT('',#238954); +#238954 = CARTESIAN_POINT('',(127.491273,-51.939751,1.585)); +#238955 = LINE('',#238956,#238957); +#238956 = CARTESIAN_POINT('',(127.388666,-51.884718,1.585)); +#238957 = VECTOR('',#238958,1.); +#238958 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#238959 = ORIENTED_EDGE('',*,*,#238960,.T.); +#238960 = EDGE_CURVE('',#238953,#238961,#238963,.T.); +#238961 = VERTEX_POINT('',#238962); +#238962 = CARTESIAN_POINT('',(127.546306,-51.999501,1.585)); +#238963 = LINE('',#238964,#238965); +#238964 = CARTESIAN_POINT('',(127.491273,-51.939751,1.585)); +#238965 = VECTOR('',#238966,1.); +#238966 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#238967 = ORIENTED_EDGE('',*,*,#238968,.T.); +#238968 = EDGE_CURVE('',#238961,#238969,#238971,.T.); +#238969 = VERTEX_POINT('',#238970); +#238970 = CARTESIAN_POINT('',(127.593109,-52.099628,1.585)); +#238971 = LINE('',#238972,#238973); +#238972 = CARTESIAN_POINT('',(127.546306,-51.999501,1.585)); +#238973 = VECTOR('',#238974,1.); +#238974 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#238975 = ORIENTED_EDGE('',*,*,#238976,.T.); +#238976 = EDGE_CURVE('',#238969,#238977,#238979,.T.); +#238977 = VERTEX_POINT('',#238978); +#238978 = CARTESIAN_POINT('',(127.596025,-52.118013,1.585)); +#238979 = LINE('',#238980,#238981); +#238980 = CARTESIAN_POINT('',(127.593109,-52.099628,1.585)); +#238981 = VECTOR('',#238982,1.); +#238982 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#238983 = ORIENTED_EDGE('',*,*,#238984,.T.); +#238984 = EDGE_CURVE('',#238977,#238985,#238987,.T.); +#238985 = VERTEX_POINT('',#238986); +#238986 = CARTESIAN_POINT('',(127.922322,-51.889606,1.585)); +#238987 = LINE('',#238988,#238989); +#238988 = CARTESIAN_POINT('',(127.596025,-52.118013,1.585)); +#238989 = VECTOR('',#238990,1.); +#238990 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#238991 = ORIENTED_EDGE('',*,*,#238992,.T.); +#238992 = EDGE_CURVE('',#238985,#238993,#238995,.T.); +#238993 = VERTEX_POINT('',#238994); +#238994 = CARTESIAN_POINT('',(127.996872,-51.996106,1.585)); +#238995 = CIRCLE('',#238996,6.499990865384E-02); +#238996 = AXIS2_PLACEMENT_3D('',#238997,#238998,#238999); +#238997 = CARTESIAN_POINT('',(127.95959707222,-51.94285594944,1.585)); +#238998 = DIRECTION('',(0.,0.,-1.)); +#238999 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#239000 = ORIENTED_EDGE('',*,*,#239001,.T.); +#239001 = EDGE_CURVE('',#238993,#239002,#239004,.T.); +#239002 = VERTEX_POINT('',#239003); +#239003 = CARTESIAN_POINT('',(127.596025,-52.276698,1.585)); +#239004 = LINE('',#239005,#239006); +#239005 = CARTESIAN_POINT('',(127.996872,-51.996106,1.585)); +#239006 = VECTOR('',#239007,1.); +#239007 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#239008 = ORIENTED_EDGE('',*,*,#239009,.T.); +#239009 = EDGE_CURVE('',#239002,#239010,#239012,.T.); +#239010 = VERTEX_POINT('',#239011); +#239011 = CARTESIAN_POINT('',(127.596025,-52.392142,1.585)); +#239012 = LINE('',#239013,#239014); +#239013 = CARTESIAN_POINT('',(127.596025,-52.276698,1.585)); +#239014 = VECTOR('',#239015,1.); +#239015 = DIRECTION('',(0.,-1.,0.)); +#239016 = ORIENTED_EDGE('',*,*,#239017,.T.); +#239017 = EDGE_CURVE('',#239010,#239018,#239020,.T.); +#239018 = VERTEX_POINT('',#239019); +#239019 = CARTESIAN_POINT('',(127.959597,-52.392142,1.585)); +#239020 = LINE('',#239021,#239022); +#239021 = CARTESIAN_POINT('',(127.596025,-52.392142,1.585)); +#239022 = VECTOR('',#239023,1.); +#239023 = DIRECTION('',(1.,0.,0.)); +#239024 = ORIENTED_EDGE('',*,*,#239025,.T.); +#239025 = EDGE_CURVE('',#239018,#239026,#239028,.T.); +#239026 = VERTEX_POINT('',#239027); +#239027 = CARTESIAN_POINT('',(127.959597,-52.522142,1.585)); +#239028 = CIRCLE('',#239029,6.500000000092E-02); +#239029 = AXIS2_PLACEMENT_3D('',#239030,#239031,#239032); +#239030 = CARTESIAN_POINT('',(127.95959665513,-52.457142,1.585)); +#239031 = DIRECTION('',(0.,0.,-1.)); +#239032 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#239033 = ORIENTED_EDGE('',*,*,#239034,.T.); +#239034 = EDGE_CURVE('',#239026,#239035,#239037,.T.); +#239035 = VERTEX_POINT('',#239036); +#239036 = CARTESIAN_POINT('',(127.059597,-52.522142,1.585)); +#239037 = LINE('',#239038,#239039); +#239038 = CARTESIAN_POINT('',(127.959597,-52.522142,1.585)); +#239039 = VECTOR('',#239040,1.); +#239040 = DIRECTION('',(-1.,0.,0.)); +#239041 = ORIENTED_EDGE('',*,*,#239042,.T.); +#239042 = EDGE_CURVE('',#239035,#239043,#239045,.T.); +#239043 = VERTEX_POINT('',#239044); +#239044 = CARTESIAN_POINT('',(126.994597,-52.457142,1.585)); +#239045 = CIRCLE('',#239046,6.500103935389E-02); +#239046 = AXIS2_PLACEMENT_3D('',#239047,#239048,#239049); +#239047 = CARTESIAN_POINT('',(127.05959803934,-52.45714096065,1.585)); +#239048 = DIRECTION('',(0.,0.,-1.)); +#239049 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#239050 = ORIENTED_EDGE('',*,*,#239051,.T.); +#239051 = EDGE_CURVE('',#239043,#239052,#239054,.T.); +#239052 = VERTEX_POINT('',#239053); +#239053 = CARTESIAN_POINT('',(126.997512,-52.099628,1.585)); +#239054 = LINE('',#239055,#239056); +#239055 = CARTESIAN_POINT('',(126.994597,-52.457142,1.585)); +#239056 = VECTOR('',#239057,1.); +#239057 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#239058 = ORIENTED_EDGE('',*,*,#239059,.T.); +#239059 = EDGE_CURVE('',#239052,#239060,#239062,.T.); +#239060 = VERTEX_POINT('',#239061); +#239061 = CARTESIAN_POINT('',(127.050702,-51.991272,1.585)); +#239062 = LINE('',#239063,#239064); +#239063 = CARTESIAN_POINT('',(126.997512,-52.099628,1.585)); +#239064 = VECTOR('',#239065,1.); +#239065 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#239066 = ORIENTED_EDGE('',*,*,#239067,.T.); +#239067 = EDGE_CURVE('',#239060,#238942,#239068,.T.); +#239068 = LINE('',#239069,#239070); +#239069 = CARTESIAN_POINT('',(127.050702,-51.991272,1.585)); +#239070 = VECTOR('',#239071,1.); +#239071 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#239072 = FACE_BOUND('',#239073,.F.); +#239073 = EDGE_LOOP('',(#239074,#239085,#239093,#239101,#239109,#239117, + #239125)); +#239074 = ORIENTED_EDGE('',*,*,#239075,.T.); +#239075 = EDGE_CURVE('',#239076,#239078,#239080,.T.); +#239076 = VERTEX_POINT('',#239077); +#239077 = CARTESIAN_POINT('',(127.406808,-52.039134,1.585)); +#239078 = VERTEX_POINT('',#239079); +#239079 = CARTESIAN_POINT('',(127.155875,-52.067072,1.585)); +#239080 = CIRCLE('',#239081,0.180979134862); +#239081 = AXIS2_PLACEMENT_3D('',#239082,#239083,#239084); +#239082 = CARTESIAN_POINT('',(127.29569076987,-52.18198500078,1.585)); +#239083 = DIRECTION('',(0.,0.,1.)); +#239084 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#239085 = ORIENTED_EDGE('',*,*,#239086,.T.); +#239086 = EDGE_CURVE('',#239078,#239087,#239089,.T.); +#239087 = VERTEX_POINT('',#239088); +#239088 = CARTESIAN_POINT('',(127.124597,-52.129629,1.585)); +#239089 = LINE('',#239090,#239091); +#239090 = CARTESIAN_POINT('',(127.155875,-52.067072,1.585)); +#239091 = VECTOR('',#239092,1.); +#239092 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#239093 = ORIENTED_EDGE('',*,*,#239094,.T.); +#239094 = EDGE_CURVE('',#239087,#239095,#239097,.T.); +#239095 = VERTEX_POINT('',#239096); +#239096 = CARTESIAN_POINT('',(127.124597,-52.392142,1.585)); +#239097 = LINE('',#239098,#239099); +#239098 = CARTESIAN_POINT('',(127.124597,-52.129629,1.585)); +#239099 = VECTOR('',#239100,1.); +#239100 = DIRECTION('',(0.,-1.,0.)); +#239101 = ORIENTED_EDGE('',*,*,#239102,.T.); +#239102 = EDGE_CURVE('',#239095,#239103,#239105,.T.); +#239103 = VERTEX_POINT('',#239104); +#239104 = CARTESIAN_POINT('',(127.466025,-52.392142,1.585)); +#239105 = LINE('',#239106,#239107); +#239106 = CARTESIAN_POINT('',(127.124597,-52.392142,1.585)); +#239107 = VECTOR('',#239108,1.); +#239108 = DIRECTION('',(1.,0.,0.)); +#239109 = ORIENTED_EDGE('',*,*,#239110,.T.); +#239110 = EDGE_CURVE('',#239103,#239111,#239113,.T.); +#239111 = VERTEX_POINT('',#239112); +#239112 = CARTESIAN_POINT('',(127.466025,-52.129629,1.585)); +#239113 = LINE('',#239114,#239115); +#239114 = CARTESIAN_POINT('',(127.466025,-52.392142,1.585)); +#239115 = VECTOR('',#239116,1.); +#239116 = DIRECTION('',(0.,1.,0.)); +#239117 = ORIENTED_EDGE('',*,*,#239118,.T.); +#239118 = EDGE_CURVE('',#239111,#239119,#239121,.T.); +#239119 = VERTEX_POINT('',#239120); +#239120 = CARTESIAN_POINT('',(127.434746,-52.067072,1.585)); +#239121 = LINE('',#239122,#239123); +#239122 = CARTESIAN_POINT('',(127.466025,-52.129629,1.585)); +#239123 = VECTOR('',#239124,1.); +#239124 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#239125 = ORIENTED_EDGE('',*,*,#239126,.T.); +#239126 = EDGE_CURVE('',#239119,#239076,#239127,.T.); +#239127 = LINE('',#239128,#239129); +#239128 = CARTESIAN_POINT('',(127.434746,-52.067072,1.585)); +#239129 = VECTOR('',#239130,1.); +#239130 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239131 = PLANE('',#239132); +#239132 = AXIS2_PLACEMENT_3D('',#239133,#239134,#239135); +#239133 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239134 = DIRECTION('',(0.,0.,1.)); +#239135 = DIRECTION('',(1.,0.,-0.)); +#239136 = SHELL_BASED_SURFACE_MODEL('',(#239137)); +#239137 = OPEN_SHELL('',(#239138)); +#239138 = ADVANCED_FACE('',(#239139,#239240),#239315,.T.); +#239139 = FACE_BOUND('',#239140,.F.); +#239140 = EDGE_LOOP('',(#239141,#239152,#239160,#239168,#239176,#239184, + #239192,#239201,#239209,#239218,#239226,#239234)); +#239141 = ORIENTED_EDGE('',*,*,#239142,.T.); +#239142 = EDGE_CURVE('',#239143,#239145,#239147,.T.); +#239143 = VERTEX_POINT('',#239144); +#239144 = CARTESIAN_POINT('',(139.80087,-51.776818,1.585)); +#239145 = VERTEX_POINT('',#239146); +#239146 = CARTESIAN_POINT('',(140.231693,-51.679409,1.585)); +#239147 = CIRCLE('',#239148,0.670538401945); +#239148 = AXIS2_PLACEMENT_3D('',#239149,#239150,#239151); +#239149 = CARTESIAN_POINT('',(140.15590657351,-52.34565082249,1.585)); +#239150 = DIRECTION('',(0.,0.,-1.)); +#239151 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#239152 = ORIENTED_EDGE('',*,*,#239153,.T.); +#239153 = EDGE_CURVE('',#239145,#239154,#239156,.T.); +#239154 = VERTEX_POINT('',#239155); +#239155 = CARTESIAN_POINT('',(140.42438,-51.727575,1.585)); +#239156 = LINE('',#239157,#239158); +#239157 = CARTESIAN_POINT('',(140.231693,-51.679409,1.585)); +#239158 = VECTOR('',#239159,1.); +#239159 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#239160 = ORIENTED_EDGE('',*,*,#239161,.T.); +#239161 = EDGE_CURVE('',#239154,#239162,#239164,.T.); +#239162 = VERTEX_POINT('',#239163); +#239163 = CARTESIAN_POINT('',(140.526987,-51.782608,1.585)); +#239164 = LINE('',#239165,#239166); +#239165 = CARTESIAN_POINT('',(140.42438,-51.727575,1.585)); +#239166 = VECTOR('',#239167,1.); +#239167 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#239168 = ORIENTED_EDGE('',*,*,#239169,.T.); +#239169 = EDGE_CURVE('',#239162,#239170,#239172,.T.); +#239170 = VERTEX_POINT('',#239171); +#239171 = CARTESIAN_POINT('',(140.620999,-51.880741,1.585)); +#239172 = LINE('',#239173,#239174); +#239173 = CARTESIAN_POINT('',(140.526987,-51.782608,1.585)); +#239174 = VECTOR('',#239175,1.); +#239175 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#239176 = ORIENTED_EDGE('',*,*,#239177,.T.); +#239177 = EDGE_CURVE('',#239170,#239178,#239180,.T.); +#239178 = VERTEX_POINT('',#239179); +#239179 = CARTESIAN_POINT('',(140.672563,-52.032633,1.585)); +#239180 = LINE('',#239181,#239182); +#239181 = CARTESIAN_POINT('',(140.620999,-51.880741,1.585)); +#239182 = VECTOR('',#239183,1.); +#239183 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#239184 = ORIENTED_EDGE('',*,*,#239185,.T.); +#239185 = EDGE_CURVE('',#239178,#239186,#239188,.T.); +#239186 = VERTEX_POINT('',#239187); +#239187 = CARTESIAN_POINT('',(140.674597,-52.257142,1.585)); +#239188 = LINE('',#239189,#239190); +#239189 = CARTESIAN_POINT('',(140.672563,-52.032633,1.585)); +#239190 = VECTOR('',#239191,1.); +#239191 = DIRECTION('',(9.059398644849E-03,-0.999958962806,0.)); +#239192 = ORIENTED_EDGE('',*,*,#239193,.T.); +#239193 = EDGE_CURVE('',#239186,#239194,#239196,.T.); +#239194 = VERTEX_POINT('',#239195); +#239195 = CARTESIAN_POINT('',(140.609597,-52.322142,1.585)); +#239196 = CIRCLE('',#239197,6.500103935393E-02); +#239197 = AXIS2_PLACEMENT_3D('',#239198,#239199,#239200); +#239198 = CARTESIAN_POINT('',(140.60959596065,-52.25714096065,1.585)); +#239199 = DIRECTION('',(0.,0.,-1.)); +#239200 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#239201 = ORIENTED_EDGE('',*,*,#239202,.T.); +#239202 = EDGE_CURVE('',#239194,#239203,#239205,.T.); +#239203 = VERTEX_POINT('',#239204); +#239204 = CARTESIAN_POINT('',(139.709597,-52.322142,1.585)); +#239205 = LINE('',#239206,#239207); +#239206 = CARTESIAN_POINT('',(140.609597,-52.322142,1.585)); +#239207 = VECTOR('',#239208,1.); +#239208 = DIRECTION('',(-1.,0.,0.)); +#239209 = ORIENTED_EDGE('',*,*,#239210,.T.); +#239210 = EDGE_CURVE('',#239203,#239211,#239213,.T.); +#239211 = VERTEX_POINT('',#239212); +#239212 = CARTESIAN_POINT('',(139.644597,-52.257142,1.585)); +#239213 = CIRCLE('',#239214,6.500103935387E-02); +#239214 = AXIS2_PLACEMENT_3D('',#239215,#239216,#239217); +#239215 = CARTESIAN_POINT('',(139.70959803934,-52.25714096065,1.585)); +#239216 = DIRECTION('',(0.,0.,-1.)); +#239217 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#239218 = ORIENTED_EDGE('',*,*,#239219,.T.); +#239219 = EDGE_CURVE('',#239211,#239220,#239222,.T.); +#239220 = VERTEX_POINT('',#239221); +#239221 = CARTESIAN_POINT('',(139.64663,-52.032633,1.585)); +#239222 = LINE('',#239223,#239224); +#239223 = CARTESIAN_POINT('',(139.644597,-52.257142,1.585)); +#239224 = VECTOR('',#239225,1.); +#239225 = DIRECTION('',(9.05494502838E-03,0.999959003145,0.)); +#239226 = ORIENTED_EDGE('',*,*,#239227,.T.); +#239227 = EDGE_CURVE('',#239220,#239228,#239230,.T.); +#239228 = VERTEX_POINT('',#239229); +#239229 = CARTESIAN_POINT('',(139.698191,-51.880745,1.585)); +#239230 = LINE('',#239231,#239232); +#239231 = CARTESIAN_POINT('',(139.64663,-52.032633,1.585)); +#239232 = VECTOR('',#239233,1.); +#239233 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#239234 = ORIENTED_EDGE('',*,*,#239235,.T.); +#239235 = EDGE_CURVE('',#239228,#239143,#239236,.T.); +#239236 = LINE('',#239237,#239238); +#239237 = CARTESIAN_POINT('',(139.698191,-51.880745,1.585)); +#239238 = VECTOR('',#239239,1.); +#239239 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#239240 = FACE_BOUND('',#239241,.F.); +#239241 = EDGE_LOOP('',(#239242,#239253,#239261,#239269,#239277,#239285, + #239293,#239301,#239309)); +#239242 = ORIENTED_EDGE('',*,*,#239243,.T.); +#239243 = EDGE_CURVE('',#239244,#239246,#239248,.T.); +#239244 = VERTEX_POINT('',#239245); +#239245 = CARTESIAN_POINT('',(140.372622,-51.847041,1.585)); +#239246 = VERTEX_POINT('',#239247); +#239247 = CARTESIAN_POINT('',(139.876669,-51.881991,1.585)); +#239248 = CIRCLE('',#239249,0.559258743581); +#239249 = AXIS2_PLACEMENT_3D('',#239250,#239251,#239252); +#239250 = CARTESIAN_POINT('',(140.15986183298,-52.36424836035,1.585)); +#239251 = DIRECTION('',(0.,0.,1.)); +#239252 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#239253 = ORIENTED_EDGE('',*,*,#239254,.T.); +#239254 = EDGE_CURVE('',#239246,#239255,#239257,.T.); +#239255 = VERTEX_POINT('',#239256); +#239256 = CARTESIAN_POINT('',(139.809265,-51.949397,1.585)); +#239257 = LINE('',#239258,#239259); +#239258 = CARTESIAN_POINT('',(139.876669,-51.881991,1.585)); +#239259 = VECTOR('',#239260,1.); +#239260 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#239261 = ORIENTED_EDGE('',*,*,#239262,.T.); +#239262 = EDGE_CURVE('',#239255,#239263,#239265,.T.); +#239263 = VERTEX_POINT('',#239264); +#239264 = CARTESIAN_POINT('',(139.774597,-52.053403,1.585)); +#239265 = LINE('',#239266,#239267); +#239266 = CARTESIAN_POINT('',(139.809265,-51.949397,1.585)); +#239267 = VECTOR('',#239268,1.); +#239268 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#239269 = ORIENTED_EDGE('',*,*,#239270,.T.); +#239270 = EDGE_CURVE('',#239263,#239271,#239273,.T.); +#239271 = VERTEX_POINT('',#239272); +#239272 = CARTESIAN_POINT('',(139.774597,-52.192142,1.585)); +#239273 = LINE('',#239274,#239275); +#239274 = CARTESIAN_POINT('',(139.774597,-52.053403,1.585)); +#239275 = VECTOR('',#239276,1.); +#239276 = DIRECTION('',(0.,-1.,0.)); +#239277 = ORIENTED_EDGE('',*,*,#239278,.T.); +#239278 = EDGE_CURVE('',#239271,#239279,#239281,.T.); +#239279 = VERTEX_POINT('',#239280); +#239280 = CARTESIAN_POINT('',(140.544597,-52.192142,1.585)); +#239281 = LINE('',#239282,#239283); +#239282 = CARTESIAN_POINT('',(139.774597,-52.192142,1.585)); +#239283 = VECTOR('',#239284,1.); +#239284 = DIRECTION('',(1.,0.,0.)); +#239285 = ORIENTED_EDGE('',*,*,#239286,.T.); +#239286 = EDGE_CURVE('',#239279,#239287,#239289,.T.); +#239287 = VERTEX_POINT('',#239288); +#239288 = CARTESIAN_POINT('',(140.544597,-52.053403,1.585)); +#239289 = LINE('',#239290,#239291); +#239290 = CARTESIAN_POINT('',(140.544597,-52.192142,1.585)); +#239291 = VECTOR('',#239292,1.); +#239292 = DIRECTION('',(0.,1.,0.)); +#239293 = ORIENTED_EDGE('',*,*,#239294,.T.); +#239294 = EDGE_CURVE('',#239287,#239295,#239297,.T.); +#239295 = VERTEX_POINT('',#239296); +#239296 = CARTESIAN_POINT('',(140.509928,-51.949397,1.585)); +#239297 = LINE('',#239298,#239299); +#239298 = CARTESIAN_POINT('',(140.544597,-52.053403,1.585)); +#239299 = VECTOR('',#239300,1.); +#239300 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#239301 = ORIENTED_EDGE('',*,*,#239302,.T.); +#239302 = EDGE_CURVE('',#239295,#239303,#239305,.T.); +#239303 = VERTEX_POINT('',#239304); +#239304 = CARTESIAN_POINT('',(140.442522,-51.881991,1.585)); +#239305 = LINE('',#239306,#239307); +#239306 = CARTESIAN_POINT('',(140.509928,-51.949397,1.585)); +#239307 = VECTOR('',#239308,1.); +#239308 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239309 = ORIENTED_EDGE('',*,*,#239310,.T.); +#239310 = EDGE_CURVE('',#239303,#239244,#239311,.T.); +#239311 = LINE('',#239312,#239313); +#239312 = CARTESIAN_POINT('',(140.442522,-51.881991,1.585)); +#239313 = VECTOR('',#239314,1.); +#239314 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#239315 = PLANE('',#239316); +#239316 = AXIS2_PLACEMENT_3D('',#239317,#239318,#239319); +#239317 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239318 = DIRECTION('',(0.,0.,1.)); +#239319 = DIRECTION('',(1.,0.,-0.)); +#239320 = SHELL_BASED_SURFACE_MODEL('',(#239321)); +#239321 = OPEN_SHELL('',(#239322)); +#239322 = ADVANCED_FACE('',(#239323),#239392,.T.); +#239323 = FACE_BOUND('',#239324,.F.); +#239324 = EDGE_LOOP('',(#239325,#239336,#239344,#239353,#239361,#239370, + #239378,#239386)); +#239325 = ORIENTED_EDGE('',*,*,#239326,.T.); +#239326 = EDGE_CURVE('',#239327,#239329,#239331,.T.); +#239327 = VERTEX_POINT('',#239328); +#239328 = CARTESIAN_POINT('',(122.749545,-51.553696,1.585)); +#239329 = VERTEX_POINT('',#239330); +#239330 = CARTESIAN_POINT('',(122.874597,-51.57857,1.585)); +#239331 = CIRCLE('',#239332,6.499988811648E-02); +#239332 = AXIS2_PLACEMENT_3D('',#239333,#239334,#239335); +#239333 = CARTESIAN_POINT('',(122.80959711188,-51.5785702701,1.585)); +#239334 = DIRECTION('',(0.,0.,-1.)); +#239335 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#239336 = ORIENTED_EDGE('',*,*,#239337,.T.); +#239337 = EDGE_CURVE('',#239329,#239338,#239340,.T.); +#239338 = VERTEX_POINT('',#239339); +#239339 = CARTESIAN_POINT('',(122.874597,-52.007142,1.585)); +#239340 = LINE('',#239341,#239342); +#239341 = CARTESIAN_POINT('',(122.874597,-51.57857,1.585)); +#239342 = VECTOR('',#239343,1.); +#239343 = DIRECTION('',(0.,-1.,0.)); +#239344 = ORIENTED_EDGE('',*,*,#239345,.T.); +#239345 = EDGE_CURVE('',#239338,#239346,#239348,.T.); +#239346 = VERTEX_POINT('',#239347); +#239347 = CARTESIAN_POINT('',(122.809597,-52.072142,1.585)); +#239348 = CIRCLE('',#239349,6.500103935389E-02); +#239349 = AXIS2_PLACEMENT_3D('',#239350,#239351,#239352); +#239350 = CARTESIAN_POINT('',(122.80959596065,-52.00714096065,1.585)); +#239351 = DIRECTION('',(0.,0.,-1.)); +#239352 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#239353 = ORIENTED_EDGE('',*,*,#239354,.T.); +#239354 = EDGE_CURVE('',#239346,#239355,#239357,.T.); +#239355 = VERTEX_POINT('',#239356); +#239356 = CARTESIAN_POINT('',(121.909597,-52.072142,1.585)); +#239357 = LINE('',#239358,#239359); +#239358 = CARTESIAN_POINT('',(122.809597,-52.072142,1.585)); +#239359 = VECTOR('',#239360,1.); +#239360 = DIRECTION('',(-1.,0.,0.)); +#239361 = ORIENTED_EDGE('',*,*,#239362,.T.); +#239362 = EDGE_CURVE('',#239355,#239363,#239365,.T.); +#239363 = VERTEX_POINT('',#239364); +#239364 = CARTESIAN_POINT('',(121.909597,-51.942142,1.585)); +#239365 = CIRCLE('',#239366,6.500000000091E-02); +#239366 = AXIS2_PLACEMENT_3D('',#239367,#239368,#239369); +#239367 = CARTESIAN_POINT('',(121.90959734486,-52.007142,1.585)); +#239368 = DIRECTION('',(0.,0.,-1.)); +#239369 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#239370 = ORIENTED_EDGE('',*,*,#239371,.T.); +#239371 = EDGE_CURVE('',#239363,#239372,#239374,.T.); +#239372 = VERTEX_POINT('',#239373); +#239373 = CARTESIAN_POINT('',(122.744597,-51.942142,1.585)); +#239374 = LINE('',#239375,#239376); +#239375 = CARTESIAN_POINT('',(121.909597,-51.942142,1.585)); +#239376 = VECTOR('',#239377,1.); +#239377 = DIRECTION('',(1.,0.,0.)); +#239378 = ORIENTED_EDGE('',*,*,#239379,.T.); +#239379 = EDGE_CURVE('',#239372,#239380,#239382,.T.); +#239380 = VERTEX_POINT('',#239381); +#239381 = CARTESIAN_POINT('',(122.744597,-51.57857,1.585)); +#239382 = LINE('',#239383,#239384); +#239383 = CARTESIAN_POINT('',(122.744597,-51.942142,1.585)); +#239384 = VECTOR('',#239385,1.); +#239385 = DIRECTION('',(0.,1.,0.)); +#239386 = ORIENTED_EDGE('',*,*,#239387,.T.); +#239387 = EDGE_CURVE('',#239380,#239327,#239388,.T.); +#239388 = LINE('',#239389,#239390); +#239389 = CARTESIAN_POINT('',(122.744597,-51.57857,1.585)); +#239390 = VECTOR('',#239391,1.); +#239391 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#239392 = PLANE('',#239393); +#239393 = AXIS2_PLACEMENT_3D('',#239394,#239395,#239396); +#239394 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239395 = DIRECTION('',(0.,0.,1.)); +#239396 = DIRECTION('',(1.,0.,-0.)); +#239397 = SHELL_BASED_SURFACE_MODEL('',(#239398)); +#239398 = OPEN_SHELL('',(#239399)); +#239399 = ADVANCED_FACE('',(#239400),#239516,.T.); +#239400 = FACE_BOUND('',#239401,.F.); +#239401 = EDGE_LOOP('',(#239402,#239413,#239421,#239429,#239437,#239446, + #239454,#239462,#239470,#239478,#239486,#239494,#239502,#239510)); +#239402 = ORIENTED_EDGE('',*,*,#239403,.T.); +#239403 = EDGE_CURVE('',#239404,#239406,#239408,.T.); +#239404 = VERTEX_POINT('',#239405); +#239405 = CARTESIAN_POINT('',(183.086217,-49.850139,1.585)); +#239406 = VERTEX_POINT('',#239407); +#239407 = CARTESIAN_POINT('',(183.184076,-49.830674,1.585)); +#239408 = CIRCLE('',#239409,5.999850008894E-02); +#239409 = AXIS2_PLACEMENT_3D('',#239410,#239411,#239412); +#239410 = CARTESIAN_POINT('',(183.14164907544,-49.87309776793,1.585)); +#239411 = DIRECTION('',(0.,0.,-1.)); +#239412 = DIRECTION('',(-0.923891019961,0.382655698032,0.)); +#239413 = ORIENTED_EDGE('',*,*,#239414,.T.); +#239414 = EDGE_CURVE('',#239406,#239415,#239417,.T.); +#239415 = VERTEX_POINT('',#239416); +#239416 = CARTESIAN_POINT('',(185.266503,-51.9131,1.585)); +#239417 = LINE('',#239418,#239419); +#239418 = CARTESIAN_POINT('',(183.184076,-49.830674,1.585)); +#239419 = VECTOR('',#239420,1.); +#239420 = DIRECTION('',(0.707106950966,-0.707106611407,0.)); +#239421 = ORIENTED_EDGE('',*,*,#239422,.T.); +#239422 = EDGE_CURVE('',#239415,#239423,#239425,.T.); +#239423 = VERTEX_POINT('',#239424); +#239424 = CARTESIAN_POINT('',(189.316798,-51.9131,1.585)); +#239425 = LINE('',#239426,#239427); +#239426 = CARTESIAN_POINT('',(185.266503,-51.9131,1.585)); +#239427 = VECTOR('',#239428,1.); +#239428 = DIRECTION('',(1.,0.,0.)); +#239429 = ORIENTED_EDGE('',*,*,#239430,.T.); +#239430 = EDGE_CURVE('',#239423,#239431,#239433,.T.); +#239431 = VERTEX_POINT('',#239432); +#239432 = CARTESIAN_POINT('',(191.399223,-49.830674,1.585)); +#239433 = LINE('',#239434,#239435); +#239434 = CARTESIAN_POINT('',(189.316798,-51.9131,1.585)); +#239435 = VECTOR('',#239436,1.); +#239436 = DIRECTION('',(0.707106611407,0.707106950966,0.)); +#239437 = ORIENTED_EDGE('',*,*,#239438,.T.); +#239438 = EDGE_CURVE('',#239431,#239439,#239441,.T.); +#239439 = VERTEX_POINT('',#239440); +#239440 = CARTESIAN_POINT('',(191.484076,-49.915527,1.585)); +#239441 = CIRCLE('',#239442,6.000013170921E-02); +#239442 = AXIS2_PLACEMENT_3D('',#239443,#239444,#239445); +#239443 = CARTESIAN_POINT('',(191.4416500587,-49.87309994129,1.585)); +#239444 = DIRECTION('',(0.,0.,-1.)); +#239445 = DIRECTION('',(-0.707116092923,0.707097469327,0.)); +#239446 = ORIENTED_EDGE('',*,*,#239447,.T.); +#239447 = EDGE_CURVE('',#239439,#239448,#239450,.T.); +#239448 = VERTEX_POINT('',#239449); +#239449 = CARTESIAN_POINT('',(189.384076,-52.015526,1.585)); +#239450 = LINE('',#239451,#239452); +#239451 = CARTESIAN_POINT('',(191.484076,-49.915527,1.585)); +#239452 = VECTOR('',#239453,1.); +#239453 = DIRECTION('',(-0.707106949545,-0.707106612828,0.)); +#239454 = ORIENTED_EDGE('',*,*,#239455,.T.); +#239455 = EDGE_CURVE('',#239448,#239456,#239458,.T.); +#239456 = VERTEX_POINT('',#239457); +#239457 = CARTESIAN_POINT('',(189.364611,-52.028533,1.585)); +#239458 = LINE('',#239459,#239460); +#239459 = CARTESIAN_POINT('',(189.384076,-52.015526,1.585)); +#239460 = VECTOR('',#239461,1.); +#239461 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#239462 = ORIENTED_EDGE('',*,*,#239463,.T.); +#239463 = EDGE_CURVE('',#239456,#239464,#239466,.T.); +#239464 = VERTEX_POINT('',#239465); +#239465 = CARTESIAN_POINT('',(189.34165,-52.0331,1.585)); +#239466 = LINE('',#239467,#239468); +#239467 = CARTESIAN_POINT('',(189.364611,-52.028533,1.585)); +#239468 = VECTOR('',#239469,1.); +#239469 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#239470 = ORIENTED_EDGE('',*,*,#239471,.T.); +#239471 = EDGE_CURVE('',#239464,#239472,#239474,.T.); +#239472 = VERTEX_POINT('',#239473); +#239473 = CARTESIAN_POINT('',(185.24165,-52.0331,1.585)); +#239474 = LINE('',#239475,#239476); +#239475 = CARTESIAN_POINT('',(189.34165,-52.0331,1.585)); +#239476 = VECTOR('',#239477,1.); +#239477 = DIRECTION('',(-1.,0.,0.)); +#239478 = ORIENTED_EDGE('',*,*,#239479,.T.); +#239479 = EDGE_CURVE('',#239472,#239480,#239482,.T.); +#239480 = VERTEX_POINT('',#239481); +#239481 = CARTESIAN_POINT('',(185.218688,-52.028533,1.585)); +#239482 = LINE('',#239483,#239484); +#239483 = CARTESIAN_POINT('',(185.24165,-52.0331,1.585)); +#239484 = VECTOR('',#239485,1.); +#239485 = DIRECTION('',(-0.980788760097,0.1950728276,0.)); +#239486 = ORIENTED_EDGE('',*,*,#239487,.T.); +#239487 = EDGE_CURVE('',#239480,#239488,#239490,.T.); +#239488 = VERTEX_POINT('',#239489); +#239489 = CARTESIAN_POINT('',(185.199223,-52.015526,1.585)); +#239490 = LINE('',#239491,#239492); +#239491 = CARTESIAN_POINT('',(185.218688,-52.028533,1.585)); +#239492 = VECTOR('',#239493,1.); +#239493 = DIRECTION('',(-0.831451797698,0.555596893535,0.)); +#239494 = ORIENTED_EDGE('',*,*,#239495,.T.); +#239495 = EDGE_CURVE('',#239488,#239496,#239498,.T.); +#239496 = VERTEX_POINT('',#239497); +#239497 = CARTESIAN_POINT('',(183.099224,-49.915526,1.585)); +#239498 = LINE('',#239499,#239500); +#239499 = CARTESIAN_POINT('',(185.199223,-52.015526,1.585)); +#239500 = VECTOR('',#239501,1.); +#239501 = DIRECTION('',(-0.707106612828,0.707106949545,0.)); +#239502 = ORIENTED_EDGE('',*,*,#239503,.T.); +#239503 = EDGE_CURVE('',#239496,#239504,#239506,.T.); +#239504 = VERTEX_POINT('',#239505); +#239505 = CARTESIAN_POINT('',(183.086217,-49.896061,1.585)); +#239506 = LINE('',#239507,#239508); +#239507 = CARTESIAN_POINT('',(183.099224,-49.915526,1.585)); +#239508 = VECTOR('',#239509,1.); +#239509 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#239510 = ORIENTED_EDGE('',*,*,#239511,.T.); +#239511 = EDGE_CURVE('',#239504,#239404,#239512,.T.); +#239512 = LINE('',#239513,#239514); +#239513 = CARTESIAN_POINT('',(183.086217,-49.896061,1.585)); +#239514 = VECTOR('',#239515,1.); +#239515 = DIRECTION('',(0.,1.,0.)); +#239516 = PLANE('',#239517); +#239517 = AXIS2_PLACEMENT_3D('',#239518,#239519,#239520); +#239518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239519 = DIRECTION('',(0.,0.,1.)); +#239520 = DIRECTION('',(1.,0.,-0.)); +#239521 = SHELL_BASED_SURFACE_MODEL('',(#239522)); +#239522 = OPEN_SHELL('',(#239523)); +#239523 = ADVANCED_FACE('',(#239524),#239560,.T.); +#239524 = FACE_BOUND('',#239525,.F.); +#239525 = EDGE_LOOP('',(#239526,#239537,#239545,#239554)); +#239526 = ORIENTED_EDGE('',*,*,#239527,.T.); +#239527 = EDGE_CURVE('',#239528,#239530,#239532,.T.); +#239528 = VERTEX_POINT('',#239529); +#239529 = CARTESIAN_POINT('',(179.480398,-52.0181,1.585)); +#239530 = VERTEX_POINT('',#239531); +#239531 = CARTESIAN_POINT('',(179.480398,-51.8981,1.585)); +#239532 = CIRCLE('',#239533,6.000000000042E-02); +#239533 = AXIS2_PLACEMENT_3D('',#239534,#239535,#239536); +#239534 = CARTESIAN_POINT('',(179.48039777441,-51.9581,1.585)); +#239535 = DIRECTION('',(0.,0.,-1.)); +#239536 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#239537 = ORIENTED_EDGE('',*,*,#239538,.T.); +#239538 = EDGE_CURVE('',#239530,#239539,#239541,.T.); +#239539 = VERTEX_POINT('',#239540); +#239540 = CARTESIAN_POINT('',(180.002902,-51.8981,1.585)); +#239541 = LINE('',#239542,#239543); +#239542 = CARTESIAN_POINT('',(179.480398,-51.8981,1.585)); +#239543 = VECTOR('',#239544,1.); +#239544 = DIRECTION('',(1.,0.,0.)); +#239545 = ORIENTED_EDGE('',*,*,#239546,.T.); +#239546 = EDGE_CURVE('',#239539,#239547,#239549,.T.); +#239547 = VERTEX_POINT('',#239548); +#239548 = CARTESIAN_POINT('',(180.002902,-52.0181,1.585)); +#239549 = CIRCLE('',#239550,6.000000000043E-02); +#239550 = AXIS2_PLACEMENT_3D('',#239551,#239552,#239553); +#239551 = CARTESIAN_POINT('',(180.00290222558,-51.9581,1.585)); +#239552 = DIRECTION('',(0.,0.,-1.)); +#239553 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#239554 = ORIENTED_EDGE('',*,*,#239555,.T.); +#239555 = EDGE_CURVE('',#239547,#239528,#239556,.T.); +#239556 = LINE('',#239557,#239558); +#239557 = CARTESIAN_POINT('',(180.002902,-52.0181,1.585)); +#239558 = VECTOR('',#239559,1.); +#239559 = DIRECTION('',(-1.,0.,0.)); +#239560 = PLANE('',#239561); +#239561 = AXIS2_PLACEMENT_3D('',#239562,#239563,#239564); +#239562 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239563 = DIRECTION('',(0.,0.,1.)); +#239564 = DIRECTION('',(1.,0.,-0.)); +#239565 = SHELL_BASED_SURFACE_MODEL('',(#239566)); +#239566 = OPEN_SHELL('',(#239567)); +#239567 = ADVANCED_FACE('',(#239568),#239645,.T.); +#239568 = FACE_BOUND('',#239569,.F.); +#239569 = EDGE_LOOP('',(#239570,#239581,#239589,#239597,#239606,#239614, + #239622,#239631,#239639)); +#239570 = ORIENTED_EDGE('',*,*,#239571,.T.); +#239571 = EDGE_CURVE('',#239572,#239574,#239576,.T.); +#239572 = VERTEX_POINT('',#239573); +#239573 = CARTESIAN_POINT('',(116.799545,-51.417983,1.585)); +#239574 = VERTEX_POINT('',#239575); +#239575 = CARTESIAN_POINT('',(116.924597,-51.442857,1.585)); +#239576 = CIRCLE('',#239577,6.499988811649E-02); +#239577 = AXIS2_PLACEMENT_3D('',#239578,#239579,#239580); +#239578 = CARTESIAN_POINT('',(116.85959711188,-51.4428572701,1.585)); +#239579 = DIRECTION('',(0.,0.,-1.)); +#239580 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#239581 = ORIENTED_EDGE('',*,*,#239582,.T.); +#239582 = EDGE_CURVE('',#239574,#239583,#239585,.T.); +#239583 = VERTEX_POINT('',#239584); +#239584 = CARTESIAN_POINT('',(116.924597,-51.634999,1.585)); +#239585 = LINE('',#239586,#239587); +#239586 = CARTESIAN_POINT('',(116.924597,-51.442857,1.585)); +#239587 = VECTOR('',#239588,1.); +#239588 = DIRECTION('',(0.,-1.,0.)); +#239589 = ORIENTED_EDGE('',*,*,#239590,.T.); +#239590 = EDGE_CURVE('',#239583,#239591,#239593,.T.); +#239591 = VERTEX_POINT('',#239592); +#239592 = CARTESIAN_POINT('',(117.759597,-51.634999,1.585)); +#239593 = LINE('',#239594,#239595); +#239594 = CARTESIAN_POINT('',(116.924597,-51.634999,1.585)); +#239595 = VECTOR('',#239596,1.); +#239596 = DIRECTION('',(1.,0.,0.)); +#239597 = ORIENTED_EDGE('',*,*,#239598,.T.); +#239598 = EDGE_CURVE('',#239591,#239599,#239601,.T.); +#239599 = VERTEX_POINT('',#239600); +#239600 = CARTESIAN_POINT('',(117.759597,-51.764999,1.585)); +#239601 = CIRCLE('',#239602,6.500000000091E-02); +#239602 = AXIS2_PLACEMENT_3D('',#239603,#239604,#239605); +#239603 = CARTESIAN_POINT('',(117.75959665513,-51.699999,1.585)); +#239604 = DIRECTION('',(0.,0.,-1.)); +#239605 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#239606 = ORIENTED_EDGE('',*,*,#239607,.T.); +#239607 = EDGE_CURVE('',#239599,#239608,#239610,.T.); +#239608 = VERTEX_POINT('',#239609); +#239609 = CARTESIAN_POINT('',(116.924597,-51.764999,1.585)); +#239610 = LINE('',#239611,#239612); +#239611 = CARTESIAN_POINT('',(117.759597,-51.764999,1.585)); +#239612 = VECTOR('',#239613,1.); +#239613 = DIRECTION('',(-1.,0.,0.)); +#239614 = ORIENTED_EDGE('',*,*,#239615,.T.); +#239615 = EDGE_CURVE('',#239608,#239616,#239618,.T.); +#239616 = VERTEX_POINT('',#239617); +#239617 = CARTESIAN_POINT('',(116.924597,-51.957142,1.585)); +#239618 = LINE('',#239619,#239620); +#239619 = CARTESIAN_POINT('',(116.924597,-51.764999,1.585)); +#239620 = VECTOR('',#239621,1.); +#239621 = DIRECTION('',(0.,-1.,0.)); +#239622 = ORIENTED_EDGE('',*,*,#239623,.T.); +#239623 = EDGE_CURVE('',#239616,#239624,#239626,.T.); +#239624 = VERTEX_POINT('',#239625); +#239625 = CARTESIAN_POINT('',(116.794597,-51.957142,1.585)); +#239626 = CIRCLE('',#239627,6.500000000092E-02); +#239627 = AXIS2_PLACEMENT_3D('',#239628,#239629,#239630); +#239628 = CARTESIAN_POINT('',(116.859597,-51.95714165513,1.585)); +#239629 = DIRECTION('',(-0.,0.,-1.)); +#239630 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#239631 = ORIENTED_EDGE('',*,*,#239632,.T.); +#239632 = EDGE_CURVE('',#239624,#239633,#239635,.T.); +#239633 = VERTEX_POINT('',#239634); +#239634 = CARTESIAN_POINT('',(116.794597,-51.442857,1.585)); +#239635 = LINE('',#239636,#239637); +#239636 = CARTESIAN_POINT('',(116.794597,-51.957142,1.585)); +#239637 = VECTOR('',#239638,1.); +#239638 = DIRECTION('',(0.,1.,0.)); +#239639 = ORIENTED_EDGE('',*,*,#239640,.T.); +#239640 = EDGE_CURVE('',#239633,#239572,#239641,.T.); +#239641 = LINE('',#239642,#239643); +#239642 = CARTESIAN_POINT('',(116.794597,-51.442857,1.585)); +#239643 = VECTOR('',#239644,1.); +#239644 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#239645 = PLANE('',#239646); +#239646 = AXIS2_PLACEMENT_3D('',#239647,#239648,#239649); +#239647 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239648 = DIRECTION('',(0.,0.,1.)); +#239649 = DIRECTION('',(1.,0.,-0.)); +#239650 = SHELL_BASED_SURFACE_MODEL('',(#239651)); +#239651 = OPEN_SHELL('',(#239652)); +#239652 = ADVANCED_FACE('',(#239653),#239811,.T.); +#239653 = FACE_BOUND('',#239654,.F.); +#239654 = EDGE_LOOP('',(#239655,#239666,#239674,#239683,#239691,#239699, + #239707,#239715,#239724,#239732,#239740,#239748,#239757,#239765, + #239773,#239781,#239789,#239797,#239805)); +#239655 = ORIENTED_EDGE('',*,*,#239656,.T.); +#239656 = EDGE_CURVE('',#239657,#239659,#239661,.T.); +#239657 = VERTEX_POINT('',#239658); +#239658 = CARTESIAN_POINT('',(151.22165,-45.1131,1.585)); +#239659 = VERTEX_POINT('',#239660); +#239660 = CARTESIAN_POINT('',(151.28165,-45.0531,1.585)); +#239661 = CIRCLE('',#239662,5.999932016255E-02); +#239662 = AXIS2_PLACEMENT_3D('',#239663,#239664,#239665); +#239663 = CARTESIAN_POINT('',(151.28164932015,-45.11309932015,1.585)); +#239664 = DIRECTION('',(0.,0.,-1.)); +#239665 = DIRECTION('',(-0.999999999936,-1.133081695041E-05,-0.)); +#239666 = ORIENTED_EDGE('',*,*,#239667,.T.); +#239667 = EDGE_CURVE('',#239659,#239668,#239670,.T.); +#239668 = VERTEX_POINT('',#239669); +#239669 = CARTESIAN_POINT('',(153.63165,-45.0531,1.585)); +#239670 = LINE('',#239671,#239672); +#239671 = CARTESIAN_POINT('',(151.28165,-45.0531,1.585)); +#239672 = VECTOR('',#239673,1.); +#239673 = DIRECTION('',(1.,0.,0.)); +#239674 = ORIENTED_EDGE('',*,*,#239675,.T.); +#239675 = EDGE_CURVE('',#239668,#239676,#239678,.T.); +#239676 = VERTEX_POINT('',#239677); +#239677 = CARTESIAN_POINT('',(153.63165,-45.1731,1.585)); +#239678 = CIRCLE('',#239679,6.000000000043E-02); +#239679 = AXIS2_PLACEMENT_3D('',#239680,#239681,#239682); +#239680 = CARTESIAN_POINT('',(153.63165022558,-45.1131,1.585)); +#239681 = DIRECTION('',(0.,0.,-1.)); +#239682 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#239683 = ORIENTED_EDGE('',*,*,#239684,.T.); +#239684 = EDGE_CURVE('',#239676,#239685,#239687,.T.); +#239685 = VERTEX_POINT('',#239686); +#239686 = CARTESIAN_POINT('',(151.34165,-45.1731,1.585)); +#239687 = LINE('',#239688,#239689); +#239688 = CARTESIAN_POINT('',(153.63165,-45.1731,1.585)); +#239689 = VECTOR('',#239690,1.); +#239690 = DIRECTION('',(-1.,0.,0.)); +#239691 = ORIENTED_EDGE('',*,*,#239692,.T.); +#239692 = EDGE_CURVE('',#239685,#239693,#239695,.T.); +#239693 = VERTEX_POINT('',#239694); +#239694 = CARTESIAN_POINT('',(151.34165,-50.84381,1.585)); +#239695 = LINE('',#239696,#239697); +#239696 = CARTESIAN_POINT('',(151.34165,-45.1731,1.585)); +#239697 = VECTOR('',#239698,1.); +#239698 = DIRECTION('',(0.,-1.,0.)); +#239699 = ORIENTED_EDGE('',*,*,#239700,.T.); +#239700 = EDGE_CURVE('',#239693,#239701,#239703,.T.); +#239701 = VERTEX_POINT('',#239702); +#239702 = CARTESIAN_POINT('',(152.069832,-51.571992,1.585)); +#239703 = LINE('',#239704,#239705); +#239704 = CARTESIAN_POINT('',(151.34165,-50.84381,1.585)); +#239705 = VECTOR('',#239706,1.); +#239706 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#239707 = ORIENTED_EDGE('',*,*,#239708,.T.); +#239708 = EDGE_CURVE('',#239701,#239709,#239711,.T.); +#239709 = VERTEX_POINT('',#239710); +#239710 = CARTESIAN_POINT('',(152.069832,-51.579764,1.585)); +#239711 = LINE('',#239712,#239713); +#239712 = CARTESIAN_POINT('',(152.069832,-51.571992,1.585)); +#239713 = VECTOR('',#239714,1.); +#239714 = DIRECTION('',(0.,-1.,0.)); +#239715 = ORIENTED_EDGE('',*,*,#239716,.T.); +#239716 = EDGE_CURVE('',#239709,#239717,#239719,.T.); +#239717 = VERTEX_POINT('',#239718); +#239718 = CARTESIAN_POINT('',(152.187686,-51.697618,1.585)); +#239719 = CIRCLE('',#239720,0.150002525551); +#239720 = AXIS2_PLACEMENT_3D('',#239721,#239722,#239723); +#239721 = CARTESIAN_POINT('',(152.21695189941,-51.55049810058,1.585)); +#239722 = DIRECTION('',(0.,0.,1.)); +#239723 = DIRECTION('',(-0.980782815972,-0.19510271114,0.)); +#239724 = ORIENTED_EDGE('',*,*,#239725,.T.); +#239725 = EDGE_CURVE('',#239717,#239726,#239728,.T.); +#239726 = VERTEX_POINT('',#239727); +#239727 = CARTESIAN_POINT('',(152.196307,-51.698467,1.585)); +#239728 = LINE('',#239729,#239730); +#239729 = CARTESIAN_POINT('',(152.187686,-51.697618,1.585)); +#239730 = VECTOR('',#239731,1.); +#239731 = DIRECTION('',(0.99518578946,-9.800634906117E-02,0.)); +#239732 = ORIENTED_EDGE('',*,*,#239733,.T.); +#239733 = EDGE_CURVE('',#239726,#239734,#239736,.T.); +#239734 = VERTEX_POINT('',#239735); +#239735 = CARTESIAN_POINT('',(152.37094,-51.8731,1.585)); +#239736 = LINE('',#239737,#239738); +#239737 = CARTESIAN_POINT('',(152.196307,-51.698467,1.585)); +#239738 = VECTOR('',#239739,1.); +#239739 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#239740 = ORIENTED_EDGE('',*,*,#239741,.T.); +#239741 = EDGE_CURVE('',#239734,#239742,#239744,.T.); +#239742 = VERTEX_POINT('',#239743); +#239743 = CARTESIAN_POINT('',(153.63165,-51.8731,1.585)); +#239744 = LINE('',#239745,#239746); +#239745 = CARTESIAN_POINT('',(152.37094,-51.8731,1.585)); +#239746 = VECTOR('',#239747,1.); +#239747 = DIRECTION('',(1.,0.,0.)); +#239748 = ORIENTED_EDGE('',*,*,#239749,.T.); +#239749 = EDGE_CURVE('',#239742,#239750,#239752,.T.); +#239750 = VERTEX_POINT('',#239751); +#239751 = CARTESIAN_POINT('',(153.63165,-51.9931,1.585)); +#239752 = CIRCLE('',#239753,6.000000000042E-02); +#239753 = AXIS2_PLACEMENT_3D('',#239754,#239755,#239756); +#239754 = CARTESIAN_POINT('',(153.63165022558,-51.9331,1.585)); +#239755 = DIRECTION('',(0.,0.,-1.)); +#239756 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#239757 = ORIENTED_EDGE('',*,*,#239758,.T.); +#239758 = EDGE_CURVE('',#239750,#239759,#239761,.T.); +#239759 = VERTEX_POINT('',#239760); +#239760 = CARTESIAN_POINT('',(152.346087,-51.9931,1.585)); +#239761 = LINE('',#239762,#239763); +#239762 = CARTESIAN_POINT('',(153.63165,-51.9931,1.585)); +#239763 = VECTOR('',#239764,1.); +#239764 = DIRECTION('',(-1.,0.,0.)); +#239765 = ORIENTED_EDGE('',*,*,#239766,.T.); +#239766 = EDGE_CURVE('',#239759,#239767,#239769,.T.); +#239767 = VERTEX_POINT('',#239768); +#239768 = CARTESIAN_POINT('',(152.323126,-51.988533,1.585)); +#239769 = LINE('',#239770,#239771); +#239770 = CARTESIAN_POINT('',(152.346087,-51.9931,1.585)); +#239771 = VECTOR('',#239772,1.); +#239772 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#239773 = ORIENTED_EDGE('',*,*,#239774,.T.); +#239774 = EDGE_CURVE('',#239767,#239775,#239777,.T.); +#239775 = VERTEX_POINT('',#239776); +#239776 = CARTESIAN_POINT('',(152.30366,-51.975526,1.585)); +#239777 = LINE('',#239778,#239779); +#239778 = CARTESIAN_POINT('',(152.323126,-51.988533,1.585)); +#239779 = VECTOR('',#239780,1.); +#239780 = DIRECTION('',(-0.831464982668,0.555577161695,0.)); +#239781 = ORIENTED_EDGE('',*,*,#239782,.T.); +#239782 = EDGE_CURVE('',#239775,#239783,#239785,.T.); +#239783 = VERTEX_POINT('',#239784); +#239784 = CARTESIAN_POINT('',(151.239224,-50.911089,1.585)); +#239785 = LINE('',#239786,#239787); +#239786 = CARTESIAN_POINT('',(152.30366,-51.975526,1.585)); +#239787 = VECTOR('',#239788,1.); +#239788 = DIRECTION('',(-0.707106449036,0.707107113337,0.)); +#239789 = ORIENTED_EDGE('',*,*,#239790,.T.); +#239790 = EDGE_CURVE('',#239783,#239791,#239793,.T.); +#239791 = VERTEX_POINT('',#239792); +#239792 = CARTESIAN_POINT('',(151.226217,-50.891624,1.585)); +#239793 = LINE('',#239794,#239795); +#239794 = CARTESIAN_POINT('',(151.239224,-50.911089,1.585)); +#239795 = VECTOR('',#239796,1.); +#239796 = DIRECTION('',(-0.555596893535,0.831451797697,0.)); +#239797 = ORIENTED_EDGE('',*,*,#239798,.T.); +#239798 = EDGE_CURVE('',#239791,#239799,#239801,.T.); +#239799 = VERTEX_POINT('',#239800); +#239800 = CARTESIAN_POINT('',(151.22165,-50.868663,1.585)); +#239801 = LINE('',#239802,#239803); +#239802 = CARTESIAN_POINT('',(151.226217,-50.891624,1.585)); +#239803 = VECTOR('',#239804,1.); +#239804 = DIRECTION('',(-0.195081000117,0.980787134598,0.)); +#239805 = ORIENTED_EDGE('',*,*,#239806,.T.); +#239806 = EDGE_CURVE('',#239799,#239657,#239807,.T.); +#239807 = LINE('',#239808,#239809); +#239808 = CARTESIAN_POINT('',(151.22165,-50.868663,1.585)); +#239809 = VECTOR('',#239810,1.); +#239810 = DIRECTION('',(0.,1.,0.)); +#239811 = PLANE('',#239812); +#239812 = AXIS2_PLACEMENT_3D('',#239813,#239814,#239815); +#239813 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239814 = DIRECTION('',(0.,0.,1.)); +#239815 = DIRECTION('',(1.,0.,-0.)); +#239816 = SHELL_BASED_SURFACE_MODEL('',(#239817)); +#239817 = OPEN_SHELL('',(#239818)); +#239818 = ADVANCED_FACE('',(#239819),#239944,.T.); +#239819 = FACE_BOUND('',#239820,.F.); +#239820 = EDGE_LOOP('',(#239821,#239832,#239840,#239849,#239857,#239865, + #239873,#239881,#239889,#239897,#239905,#239914,#239922,#239930, + #239938)); +#239821 = ORIENTED_EDGE('',*,*,#239822,.T.); +#239822 = EDGE_CURVE('',#239823,#239825,#239827,.T.); +#239823 = VERTEX_POINT('',#239824); +#239824 = CARTESIAN_POINT('',(155.75165,-45.1731,1.585)); +#239825 = VERTEX_POINT('',#239826); +#239826 = CARTESIAN_POINT('',(155.75165,-45.0531,1.585)); +#239827 = CIRCLE('',#239828,6.000000000042E-02); +#239828 = AXIS2_PLACEMENT_3D('',#239829,#239830,#239831); +#239829 = CARTESIAN_POINT('',(155.75164977441,-45.1131,1.585)); +#239830 = DIRECTION('',(0.,0.,-1.)); +#239831 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#239832 = ORIENTED_EDGE('',*,*,#239833,.T.); +#239833 = EDGE_CURVE('',#239825,#239834,#239836,.T.); +#239834 = VERTEX_POINT('',#239835); +#239835 = CARTESIAN_POINT('',(158.10165,-45.0531,1.585)); +#239836 = LINE('',#239837,#239838); +#239837 = CARTESIAN_POINT('',(155.75165,-45.0531,1.585)); +#239838 = VECTOR('',#239839,1.); +#239839 = DIRECTION('',(1.,0.,0.)); +#239840 = ORIENTED_EDGE('',*,*,#239841,.T.); +#239841 = EDGE_CURVE('',#239834,#239842,#239844,.T.); +#239842 = VERTEX_POINT('',#239843); +#239843 = CARTESIAN_POINT('',(158.16165,-45.1131,1.585)); +#239844 = CIRCLE('',#239845,5.999932016261E-02); +#239845 = AXIS2_PLACEMENT_3D('',#239846,#239847,#239848); +#239846 = CARTESIAN_POINT('',(158.10165067984,-45.11309932015,1.585)); +#239847 = DIRECTION('',(0.,0.,-1.)); +#239848 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#239849 = ORIENTED_EDGE('',*,*,#239850,.T.); +#239850 = EDGE_CURVE('',#239842,#239851,#239853,.T.); +#239851 = VERTEX_POINT('',#239852); +#239852 = CARTESIAN_POINT('',(158.16165,-50.868663,1.585)); +#239853 = LINE('',#239854,#239855); +#239854 = CARTESIAN_POINT('',(158.16165,-45.1131,1.585)); +#239855 = VECTOR('',#239856,1.); +#239856 = DIRECTION('',(0.,-1.,0.)); +#239857 = ORIENTED_EDGE('',*,*,#239858,.T.); +#239858 = EDGE_CURVE('',#239851,#239859,#239861,.T.); +#239859 = VERTEX_POINT('',#239860); +#239860 = CARTESIAN_POINT('',(158.157083,-50.891624,1.585)); +#239861 = LINE('',#239862,#239863); +#239862 = CARTESIAN_POINT('',(158.16165,-50.868663,1.585)); +#239863 = VECTOR('',#239864,1.); +#239864 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#239865 = ORIENTED_EDGE('',*,*,#239866,.T.); +#239866 = EDGE_CURVE('',#239859,#239867,#239869,.T.); +#239867 = VERTEX_POINT('',#239868); +#239868 = CARTESIAN_POINT('',(158.144076,-50.91109,1.585)); +#239869 = LINE('',#239870,#239871); +#239870 = CARTESIAN_POINT('',(158.157083,-50.891624,1.585)); +#239871 = VECTOR('',#239872,1.); +#239872 = DIRECTION('',(-0.555577161695,-0.831464982668,0.)); +#239873 = ORIENTED_EDGE('',*,*,#239874,.T.); +#239874 = EDGE_CURVE('',#239867,#239875,#239877,.T.); +#239875 = VERTEX_POINT('',#239876); +#239876 = CARTESIAN_POINT('',(157.079639,-51.975526,1.585)); +#239877 = LINE('',#239878,#239879); +#239878 = CARTESIAN_POINT('',(158.144076,-50.91109,1.585)); +#239879 = VECTOR('',#239880,1.); +#239880 = DIRECTION('',(-0.707107113337,-0.707106449036,0.)); +#239881 = ORIENTED_EDGE('',*,*,#239882,.T.); +#239882 = EDGE_CURVE('',#239875,#239883,#239885,.T.); +#239883 = VERTEX_POINT('',#239884); +#239884 = CARTESIAN_POINT('',(157.060174,-51.988533,1.585)); +#239885 = LINE('',#239886,#239887); +#239886 = CARTESIAN_POINT('',(157.079639,-51.975526,1.585)); +#239887 = VECTOR('',#239888,1.); +#239888 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#239889 = ORIENTED_EDGE('',*,*,#239890,.T.); +#239890 = EDGE_CURVE('',#239883,#239891,#239893,.T.); +#239891 = VERTEX_POINT('',#239892); +#239892 = CARTESIAN_POINT('',(157.037213,-51.9931,1.585)); +#239893 = LINE('',#239894,#239895); +#239894 = CARTESIAN_POINT('',(157.060174,-51.988533,1.585)); +#239895 = VECTOR('',#239896,1.); +#239896 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#239897 = ORIENTED_EDGE('',*,*,#239898,.T.); +#239898 = EDGE_CURVE('',#239891,#239899,#239901,.T.); +#239899 = VERTEX_POINT('',#239900); +#239900 = CARTESIAN_POINT('',(155.75165,-51.9931,1.585)); +#239901 = LINE('',#239902,#239903); +#239902 = CARTESIAN_POINT('',(157.037213,-51.9931,1.585)); +#239903 = VECTOR('',#239904,1.); +#239904 = DIRECTION('',(-1.,0.,0.)); +#239905 = ORIENTED_EDGE('',*,*,#239906,.T.); +#239906 = EDGE_CURVE('',#239899,#239907,#239909,.T.); +#239907 = VERTEX_POINT('',#239908); +#239908 = CARTESIAN_POINT('',(155.75165,-51.8731,1.585)); +#239909 = CIRCLE('',#239910,6.000000000042E-02); +#239910 = AXIS2_PLACEMENT_3D('',#239911,#239912,#239913); +#239911 = CARTESIAN_POINT('',(155.75164977441,-51.9331,1.585)); +#239912 = DIRECTION('',(0.,0.,-1.)); +#239913 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#239914 = ORIENTED_EDGE('',*,*,#239915,.T.); +#239915 = EDGE_CURVE('',#239907,#239916,#239918,.T.); +#239916 = VERTEX_POINT('',#239917); +#239917 = CARTESIAN_POINT('',(157.012361,-51.8731,1.585)); +#239918 = LINE('',#239919,#239920); +#239919 = CARTESIAN_POINT('',(155.75165,-51.8731,1.585)); +#239920 = VECTOR('',#239921,1.); +#239921 = DIRECTION('',(1.,0.,0.)); +#239922 = ORIENTED_EDGE('',*,*,#239923,.T.); +#239923 = EDGE_CURVE('',#239916,#239924,#239926,.T.); +#239924 = VERTEX_POINT('',#239925); +#239925 = CARTESIAN_POINT('',(158.04165,-50.84381,1.585)); +#239926 = LINE('',#239927,#239928); +#239927 = CARTESIAN_POINT('',(157.012361,-51.8731,1.585)); +#239928 = VECTOR('',#239929,1.); +#239929 = DIRECTION('',(0.707106437694,0.707107124679,0.)); +#239930 = ORIENTED_EDGE('',*,*,#239931,.T.); +#239931 = EDGE_CURVE('',#239924,#239932,#239934,.T.); +#239932 = VERTEX_POINT('',#239933); +#239933 = CARTESIAN_POINT('',(158.04165,-45.1731,1.585)); +#239934 = LINE('',#239935,#239936); +#239935 = CARTESIAN_POINT('',(158.04165,-50.84381,1.585)); +#239936 = VECTOR('',#239937,1.); +#239937 = DIRECTION('',(0.,1.,0.)); +#239938 = ORIENTED_EDGE('',*,*,#239939,.T.); +#239939 = EDGE_CURVE('',#239932,#239823,#239940,.T.); +#239940 = LINE('',#239941,#239942); +#239941 = CARTESIAN_POINT('',(158.04165,-45.1731,1.585)); +#239942 = VECTOR('',#239943,1.); +#239943 = DIRECTION('',(-1.,0.,0.)); +#239944 = PLANE('',#239945); +#239945 = AXIS2_PLACEMENT_3D('',#239946,#239947,#239948); +#239946 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239947 = DIRECTION('',(0.,0.,1.)); +#239948 = DIRECTION('',(1.,0.,-0.)); +#239949 = SHELL_BASED_SURFACE_MODEL('',(#239950)); +#239950 = OPEN_SHELL('',(#239951)); +#239951 = ADVANCED_FACE('',(#239952),#240054,.T.); +#239952 = FACE_BOUND('',#239953,.F.); +#239953 = EDGE_LOOP('',(#239954,#239964,#239973,#239981,#239989,#239998, + #240006,#240014,#240023,#240031,#240039,#240048)); +#239954 = ORIENTED_EDGE('',*,*,#239955,.T.); +#239955 = EDGE_CURVE('',#239956,#239958,#239960,.T.); +#239956 = VERTEX_POINT('',#239957); +#239957 = CARTESIAN_POINT('',(124.929596,-51.521878,1.585)); +#239958 = VERTEX_POINT('',#239959); +#239959 = CARTESIAN_POINT('',(125.343541,-51.245916,1.585)); +#239960 = LINE('',#239961,#239962); +#239961 = CARTESIAN_POINT('',(124.929596,-51.521878,1.585)); +#239962 = VECTOR('',#239963,1.); +#239963 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#239964 = ORIENTED_EDGE('',*,*,#239965,.T.); +#239965 = EDGE_CURVE('',#239958,#239966,#239968,.T.); +#239966 = VERTEX_POINT('',#239967); +#239967 = CARTESIAN_POINT('',(125.415652,-51.354082,1.585)); +#239968 = CIRCLE('',#239969,6.499976899535E-02); +#239969 = AXIS2_PLACEMENT_3D('',#239970,#239971,#239972); +#239970 = CARTESIAN_POINT('',(125.37959612917,-51.29999924722,1.585)); +#239971 = DIRECTION('',(0.,0.,-1.)); +#239972 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#239973 = ORIENTED_EDGE('',*,*,#239974,.T.); +#239974 = EDGE_CURVE('',#239966,#239975,#239977,.T.); +#239975 = VERTEX_POINT('',#239976); +#239976 = CARTESIAN_POINT('',(125.046776,-51.599999,1.585)); +#239977 = LINE('',#239978,#239979); +#239978 = CARTESIAN_POINT('',(125.415652,-51.354082,1.585)); +#239979 = VECTOR('',#239980,1.); +#239980 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#239981 = ORIENTED_EDGE('',*,*,#239982,.T.); +#239982 = EDGE_CURVE('',#239975,#239983,#239985,.T.); +#239983 = VERTEX_POINT('',#239984); +#239984 = CARTESIAN_POINT('',(125.415652,-51.845916,1.585)); +#239985 = LINE('',#239986,#239987); +#239986 = CARTESIAN_POINT('',(125.046776,-51.599999,1.585)); +#239987 = VECTOR('',#239988,1.); +#239988 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#239989 = ORIENTED_EDGE('',*,*,#239990,.T.); +#239990 = EDGE_CURVE('',#239983,#239991,#239993,.T.); +#239991 = VERTEX_POINT('',#239992); +#239992 = CARTESIAN_POINT('',(125.343541,-51.954082,1.585)); +#239993 = CIRCLE('',#239994,6.49997689954E-02); +#239994 = AXIS2_PLACEMENT_3D('',#239995,#239996,#239997); +#239995 = CARTESIAN_POINT('',(125.37959687747,-51.89999925164,1.585)); +#239996 = DIRECTION('',(0.,0.,-1.)); +#239997 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#239998 = ORIENTED_EDGE('',*,*,#239999,.T.); +#239999 = EDGE_CURVE('',#239991,#240000,#240002,.T.); +#240000 = VERTEX_POINT('',#240001); +#240001 = CARTESIAN_POINT('',(124.929596,-51.678119,1.585)); +#240002 = LINE('',#240003,#240004); +#240003 = CARTESIAN_POINT('',(125.343541,-51.954082,1.585)); +#240004 = VECTOR('',#240005,1.); +#240005 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#240006 = ORIENTED_EDGE('',*,*,#240007,.T.); +#240007 = EDGE_CURVE('',#240000,#240008,#240010,.T.); +#240008 = VERTEX_POINT('',#240009); +#240009 = CARTESIAN_POINT('',(124.515653,-51.954082,1.585)); +#240010 = LINE('',#240011,#240012); +#240011 = CARTESIAN_POINT('',(124.929596,-51.678119,1.585)); +#240012 = VECTOR('',#240013,1.); +#240013 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#240014 = ORIENTED_EDGE('',*,*,#240015,.T.); +#240015 = EDGE_CURVE('',#240008,#240016,#240018,.T.); +#240016 = VERTEX_POINT('',#240017); +#240017 = CARTESIAN_POINT('',(124.443541,-51.845916,1.585)); +#240018 = CIRCLE('',#240019,6.500004634766E-02); +#240019 = AXIS2_PLACEMENT_3D('',#240020,#240021,#240022); +#240020 = CARTESIAN_POINT('',(124.47959737004,-51.8999987533,1.585)); +#240021 = DIRECTION('',(0.,0.,-1.)); +#240022 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#240023 = ORIENTED_EDGE('',*,*,#240024,.T.); +#240024 = EDGE_CURVE('',#240016,#240025,#240027,.T.); +#240025 = VERTEX_POINT('',#240026); +#240026 = CARTESIAN_POINT('',(124.812416,-51.599999,1.585)); +#240027 = LINE('',#240028,#240029); +#240028 = CARTESIAN_POINT('',(124.443541,-51.845916,1.585)); +#240029 = VECTOR('',#240030,1.); +#240030 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#240031 = ORIENTED_EDGE('',*,*,#240032,.T.); +#240032 = EDGE_CURVE('',#240025,#240033,#240035,.T.); +#240033 = VERTEX_POINT('',#240034); +#240034 = CARTESIAN_POINT('',(124.443541,-51.354082,1.585)); +#240035 = LINE('',#240036,#240037); +#240036 = CARTESIAN_POINT('',(124.812416,-51.599999,1.585)); +#240037 = VECTOR('',#240038,1.); +#240038 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#240039 = ORIENTED_EDGE('',*,*,#240040,.T.); +#240040 = EDGE_CURVE('',#240033,#240041,#240043,.T.); +#240041 = VERTEX_POINT('',#240042); +#240042 = CARTESIAN_POINT('',(124.515653,-51.245916,1.585)); +#240043 = CIRCLE('',#240044,6.500004634723E-02); +#240044 = AXIS2_PLACEMENT_3D('',#240045,#240046,#240047); +#240045 = CARTESIAN_POINT('',(124.47959731405,-51.29999920937,1.585)); +#240046 = DIRECTION('',(0.,0.,-1.)); +#240047 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#240048 = ORIENTED_EDGE('',*,*,#240049,.T.); +#240049 = EDGE_CURVE('',#240041,#239956,#240050,.T.); +#240050 = LINE('',#240051,#240052); +#240051 = CARTESIAN_POINT('',(124.515653,-51.245916,1.585)); +#240052 = VECTOR('',#240053,1.); +#240053 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#240054 = PLANE('',#240055); +#240055 = AXIS2_PLACEMENT_3D('',#240056,#240057,#240058); +#240056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240057 = DIRECTION('',(0.,0.,1.)); +#240058 = DIRECTION('',(1.,0.,-0.)); +#240059 = SHELL_BASED_SURFACE_MODEL('',(#240060)); +#240060 = OPEN_SHELL('',(#240061)); +#240061 = ADVANCED_FACE('',(#240062),#240334,.T.); +#240062 = FACE_BOUND('',#240063,.F.); +#240063 = EDGE_LOOP('',(#240064,#240075,#240083,#240091,#240100,#240108, + #240116,#240124,#240132,#240140,#240148,#240156,#240165,#240173, + #240181,#240189,#240197,#240205,#240214,#240222,#240230,#240239, + #240247,#240255,#240263,#240271,#240279,#240287,#240295,#240304, + #240312,#240320,#240328)); +#240064 = ORIENTED_EDGE('',*,*,#240065,.T.); +#240065 = EDGE_CURVE('',#240066,#240068,#240070,.T.); +#240066 = VERTEX_POINT('',#240067); +#240067 = CARTESIAN_POINT('',(119.39079,-51.322301,1.585)); +#240068 = VERTEX_POINT('',#240069); +#240069 = CARTESIAN_POINT('',(119.514119,-51.36341,1.585)); +#240070 = CIRCLE('',#240071,6.499998485138E-02); +#240071 = AXIS2_PLACEMENT_3D('',#240072,#240073,#240074); +#240072 = CARTESIAN_POINT('',(119.45245436584,-51.34285590248,1.585)); +#240073 = DIRECTION('',(0.,0.,-1.)); +#240074 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#240075 = ORIENTED_EDGE('',*,*,#240076,.T.); +#240076 = EDGE_CURVE('',#240068,#240077,#240079,.T.); +#240077 = VERTEX_POINT('',#240078); +#240078 = CARTESIAN_POINT('',(119.474597,-51.481975,1.585)); +#240079 = LINE('',#240080,#240081); +#240080 = CARTESIAN_POINT('',(119.514119,-51.36341,1.585)); +#240081 = VECTOR('',#240082,1.); +#240082 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#240083 = ORIENTED_EDGE('',*,*,#240084,.T.); +#240084 = EDGE_CURVE('',#240077,#240085,#240087,.T.); +#240085 = VERTEX_POINT('',#240086); +#240086 = CARTESIAN_POINT('',(119.474597,-51.670368,1.585)); +#240087 = LINE('',#240088,#240089); +#240088 = CARTESIAN_POINT('',(119.474597,-51.481975,1.585)); +#240089 = VECTOR('',#240090,1.); +#240090 = DIRECTION('',(0.,-1.,0.)); +#240091 = ORIENTED_EDGE('',*,*,#240092,.T.); +#240092 = EDGE_CURVE('',#240085,#240093,#240095,.T.); +#240093 = VERTEX_POINT('',#240094); +#240094 = CARTESIAN_POINT('',(119.59637,-51.792142,1.585)); +#240095 = CIRCLE('',#240096,0.170995888391); +#240096 = AXIS2_PLACEMENT_3D('',#240097,#240098,#240099); +#240097 = CARTESIAN_POINT('',(119.6399473225,-51.62679203534,1.585)); +#240098 = DIRECTION('',(0.,0.,1.)); +#240099 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#240100 = ORIENTED_EDGE('',*,*,#240101,.T.); +#240101 = EDGE_CURVE('',#240093,#240102,#240104,.T.); +#240102 = VERTEX_POINT('',#240103); +#240103 = CARTESIAN_POINT('',(119.651395,-51.792142,1.585)); +#240104 = LINE('',#240105,#240106); +#240105 = CARTESIAN_POINT('',(119.59637,-51.792142,1.585)); +#240106 = VECTOR('',#240107,1.); +#240107 = DIRECTION('',(1.,0.,0.)); +#240108 = ORIENTED_EDGE('',*,*,#240109,.T.); +#240109 = EDGE_CURVE('',#240102,#240110,#240112,.T.); +#240110 = VERTEX_POINT('',#240111); +#240111 = CARTESIAN_POINT('',(119.713951,-51.760864,1.585)); +#240112 = LINE('',#240113,#240114); +#240113 = CARTESIAN_POINT('',(119.651395,-51.792142,1.585)); +#240114 = VECTOR('',#240115,1.); +#240115 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#240116 = ORIENTED_EDGE('',*,*,#240117,.T.); +#240117 = EDGE_CURVE('',#240110,#240118,#240120,.T.); +#240118 = VERTEX_POINT('',#240119); +#240119 = CARTESIAN_POINT('',(119.741889,-51.732925,1.585)); +#240120 = LINE('',#240121,#240122); +#240121 = CARTESIAN_POINT('',(119.713951,-51.760864,1.585)); +#240122 = VECTOR('',#240123,1.); +#240123 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#240124 = ORIENTED_EDGE('',*,*,#240125,.T.); +#240125 = EDGE_CURVE('',#240118,#240126,#240128,.T.); +#240126 = VERTEX_POINT('',#240127); +#240127 = CARTESIAN_POINT('',(119.776839,-51.663024,1.585)); +#240128 = LINE('',#240129,#240130); +#240129 = CARTESIAN_POINT('',(119.741889,-51.732925,1.585)); +#240130 = VECTOR('',#240131,1.); +#240131 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#240132 = ORIENTED_EDGE('',*,*,#240133,.T.); +#240133 = EDGE_CURVE('',#240126,#240134,#240136,.T.); +#240134 = VERTEX_POINT('',#240135); +#240135 = CARTESIAN_POINT('',(119.822887,-51.485216,1.585)); +#240136 = LINE('',#240137,#240138); +#240137 = CARTESIAN_POINT('',(119.776839,-51.663024,1.585)); +#240138 = VECTOR('',#240139,1.); +#240139 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#240140 = ORIENTED_EDGE('',*,*,#240141,.T.); +#240141 = EDGE_CURVE('',#240134,#240142,#240144,.T.); +#240142 = VERTEX_POINT('',#240143); +#240143 = CARTESIAN_POINT('',(119.87792,-51.382609,1.585)); +#240144 = LINE('',#240145,#240146); +#240145 = CARTESIAN_POINT('',(119.822887,-51.485216,1.585)); +#240146 = VECTOR('',#240147,1.); +#240147 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#240148 = ORIENTED_EDGE('',*,*,#240149,.T.); +#240149 = EDGE_CURVE('',#240142,#240150,#240152,.T.); +#240150 = VERTEX_POINT('',#240151); +#240151 = CARTESIAN_POINT('',(119.937671,-51.327575,1.585)); +#240152 = LINE('',#240153,#240154); +#240153 = CARTESIAN_POINT('',(119.87792,-51.382609,1.585)); +#240154 = VECTOR('',#240155,1.); +#240155 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#240156 = ORIENTED_EDGE('',*,*,#240157,.T.); +#240157 = EDGE_CURVE('',#240150,#240158,#240160,.T.); +#240158 = VERTEX_POINT('',#240159); +#240159 = CARTESIAN_POINT('',(120.167237,-51.284718,1.585)); +#240160 = CIRCLE('',#240161,0.258971949836); +#240161 = AXIS2_PLACEMENT_3D('',#240162,#240163,#240164); +#240162 = CARTESIAN_POINT('',(120.09487456064,-51.53337468736,1.585)); +#240163 = DIRECTION('',(0.,0.,-1.)); +#240164 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#240165 = ORIENTED_EDGE('',*,*,#240166,.T.); +#240166 = EDGE_CURVE('',#240158,#240167,#240169,.T.); +#240167 = VERTEX_POINT('',#240168); +#240168 = CARTESIAN_POINT('',(120.269844,-51.339751,1.585)); +#240169 = LINE('',#240170,#240171); +#240170 = CARTESIAN_POINT('',(120.167237,-51.284718,1.585)); +#240171 = VECTOR('',#240172,1.); +#240172 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#240173 = ORIENTED_EDGE('',*,*,#240174,.T.); +#240174 = EDGE_CURVE('',#240167,#240175,#240177,.T.); +#240175 = VERTEX_POINT('',#240176); +#240176 = CARTESIAN_POINT('',(120.324878,-51.399502,1.585)); +#240177 = LINE('',#240178,#240179); +#240178 = CARTESIAN_POINT('',(120.269844,-51.339751,1.585)); +#240179 = VECTOR('',#240180,1.); +#240180 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#240181 = ORIENTED_EDGE('',*,*,#240182,.T.); +#240182 = EDGE_CURVE('',#240175,#240183,#240185,.T.); +#240183 = VERTEX_POINT('',#240184); +#240184 = CARTESIAN_POINT('',(120.371681,-51.499628,1.585)); +#240185 = LINE('',#240186,#240187); +#240186 = CARTESIAN_POINT('',(120.324878,-51.399502,1.585)); +#240187 = VECTOR('',#240188,1.); +#240188 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#240189 = ORIENTED_EDGE('',*,*,#240190,.T.); +#240190 = EDGE_CURVE('',#240183,#240191,#240193,.T.); +#240191 = VERTEX_POINT('',#240192); +#240192 = CARTESIAN_POINT('',(120.372563,-51.738793,1.585)); +#240193 = LINE('',#240194,#240195); +#240194 = CARTESIAN_POINT('',(120.371681,-51.499628,1.585)); +#240195 = VECTOR('',#240196,1.); +#240196 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#240197 = ORIENTED_EDGE('',*,*,#240198,.T.); +#240198 = EDGE_CURVE('',#240191,#240199,#240201,.T.); +#240199 = VERTEX_POINT('',#240200); +#240200 = CARTESIAN_POINT('',(120.328404,-51.877697,1.585)); +#240201 = LINE('',#240202,#240203); +#240202 = CARTESIAN_POINT('',(120.372563,-51.738793,1.585)); +#240203 = VECTOR('',#240204,1.); +#240204 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#240205 = ORIENTED_EDGE('',*,*,#240206,.T.); +#240206 = EDGE_CURVE('',#240199,#240207,#240209,.T.); +#240207 = VERTEX_POINT('',#240208); +#240208 = CARTESIAN_POINT('',(120.205076,-51.836587,1.585)); +#240209 = CIRCLE('',#240210,6.499966862258E-02); +#240210 = AXIS2_PLACEMENT_3D('',#240211,#240212,#240213); +#240211 = CARTESIAN_POINT('',(120.26674006734,-51.85714179797,1.585)); +#240212 = DIRECTION('',(-0.,0.,-1.)); +#240213 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#240214 = ORIENTED_EDGE('',*,*,#240215,.T.); +#240215 = EDGE_CURVE('',#240207,#240216,#240218,.T.); +#240216 = VERTEX_POINT('',#240217); +#240217 = CARTESIAN_POINT('',(120.244597,-51.718024,1.585)); +#240218 = LINE('',#240219,#240220); +#240219 = CARTESIAN_POINT('',(120.205076,-51.836587,1.585)); +#240220 = VECTOR('',#240221,1.); +#240221 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#240222 = ORIENTED_EDGE('',*,*,#240223,.T.); +#240223 = EDGE_CURVE('',#240216,#240224,#240226,.T.); +#240224 = VERTEX_POINT('',#240225); +#240225 = CARTESIAN_POINT('',(120.244597,-51.52963,1.585)); +#240226 = LINE('',#240227,#240228); +#240227 = CARTESIAN_POINT('',(120.244597,-51.718024,1.585)); +#240228 = VECTOR('',#240229,1.); +#240229 = DIRECTION('',(0.,1.,0.)); +#240230 = ORIENTED_EDGE('',*,*,#240231,.T.); +#240231 = EDGE_CURVE('',#240224,#240232,#240234,.T.); +#240232 = VERTEX_POINT('',#240233); +#240233 = CARTESIAN_POINT('',(120.122823,-51.407856,1.585)); +#240234 = CIRCLE('',#240235,0.170999251022); +#240235 = AXIS2_PLACEMENT_3D('',#240236,#240237,#240238); +#240236 = CARTESIAN_POINT('',(120.079244,-51.573209,1.585)); +#240237 = DIRECTION('',(0.,0.,1.)); +#240238 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#240239 = ORIENTED_EDGE('',*,*,#240240,.T.); +#240240 = EDGE_CURVE('',#240232,#240241,#240243,.T.); +#240241 = VERTEX_POINT('',#240242); +#240242 = CARTESIAN_POINT('',(120.067799,-51.407856,1.585)); +#240243 = LINE('',#240244,#240245); +#240244 = CARTESIAN_POINT('',(120.122823,-51.407856,1.585)); +#240245 = VECTOR('',#240246,1.); +#240246 = DIRECTION('',(-1.,0.,0.)); +#240247 = ORIENTED_EDGE('',*,*,#240248,.T.); +#240248 = EDGE_CURVE('',#240241,#240249,#240251,.T.); +#240249 = VERTEX_POINT('',#240250); +#240250 = CARTESIAN_POINT('',(120.005243,-51.439134,1.585)); +#240251 = LINE('',#240252,#240253); +#240252 = CARTESIAN_POINT('',(120.067799,-51.407856,1.585)); +#240253 = VECTOR('',#240254,1.); +#240254 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#240255 = ORIENTED_EDGE('',*,*,#240256,.T.); +#240256 = EDGE_CURVE('',#240249,#240257,#240259,.T.); +#240257 = VERTEX_POINT('',#240258); +#240258 = CARTESIAN_POINT('',(119.977303,-51.467074,1.585)); +#240259 = LINE('',#240260,#240261); +#240260 = CARTESIAN_POINT('',(120.005243,-51.439134,1.585)); +#240261 = VECTOR('',#240262,1.); +#240262 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#240263 = ORIENTED_EDGE('',*,*,#240264,.T.); +#240264 = EDGE_CURVE('',#240257,#240265,#240267,.T.); +#240265 = VERTEX_POINT('',#240266); +#240266 = CARTESIAN_POINT('',(119.942353,-51.536974,1.585)); +#240267 = LINE('',#240268,#240269); +#240268 = CARTESIAN_POINT('',(119.977303,-51.467074,1.585)); +#240269 = VECTOR('',#240270,1.); +#240270 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#240271 = ORIENTED_EDGE('',*,*,#240272,.T.); +#240272 = EDGE_CURVE('',#240265,#240273,#240275,.T.); +#240273 = VERTEX_POINT('',#240274); +#240274 = CARTESIAN_POINT('',(119.896306,-51.714782,1.585)); +#240275 = LINE('',#240276,#240277); +#240276 = CARTESIAN_POINT('',(119.942353,-51.536974,1.585)); +#240277 = VECTOR('',#240278,1.); +#240278 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#240279 = ORIENTED_EDGE('',*,*,#240280,.T.); +#240280 = EDGE_CURVE('',#240273,#240281,#240283,.T.); +#240281 = VERTEX_POINT('',#240282); +#240282 = CARTESIAN_POINT('',(119.841273,-51.81739,1.585)); +#240283 = LINE('',#240284,#240285); +#240284 = CARTESIAN_POINT('',(119.896306,-51.714782,1.585)); +#240285 = VECTOR('',#240286,1.); +#240286 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#240287 = ORIENTED_EDGE('',*,*,#240288,.T.); +#240288 = EDGE_CURVE('',#240281,#240289,#240291,.T.); +#240289 = VERTEX_POINT('',#240290); +#240290 = CARTESIAN_POINT('',(119.781523,-51.872423,1.585)); +#240291 = LINE('',#240292,#240293); +#240292 = CARTESIAN_POINT('',(119.841273,-51.81739,1.585)); +#240293 = VECTOR('',#240294,1.); +#240294 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#240295 = ORIENTED_EDGE('',*,*,#240296,.T.); +#240296 = EDGE_CURVE('',#240289,#240297,#240299,.T.); +#240297 = VERTEX_POINT('',#240298); +#240298 = CARTESIAN_POINT('',(119.458013,-51.866036,1.585)); +#240299 = CIRCLE('',#240300,0.260197694649); +#240300 = AXIS2_PLACEMENT_3D('',#240301,#240302,#240303); +#240301 = CARTESIAN_POINT('',(119.62379048924,-51.66548509783,1.585)); +#240302 = DIRECTION('',(-0.,0.,-1.)); +#240303 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#240304 = ORIENTED_EDGE('',*,*,#240305,.T.); +#240305 = EDGE_CURVE('',#240297,#240306,#240308,.T.); +#240306 = VERTEX_POINT('',#240307); +#240307 = CARTESIAN_POINT('',(119.400702,-51.808725,1.585)); +#240308 = LINE('',#240309,#240310); +#240309 = CARTESIAN_POINT('',(119.458013,-51.866036,1.585)); +#240310 = VECTOR('',#240311,1.); +#240311 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#240312 = ORIENTED_EDGE('',*,*,#240313,.T.); +#240313 = EDGE_CURVE('',#240306,#240314,#240316,.T.); +#240314 = VERTEX_POINT('',#240315); +#240315 = CARTESIAN_POINT('',(119.347512,-51.700369,1.585)); +#240316 = LINE('',#240317,#240318); +#240317 = CARTESIAN_POINT('',(119.400702,-51.808725,1.585)); +#240318 = VECTOR('',#240319,1.); +#240319 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#240320 = ORIENTED_EDGE('',*,*,#240321,.T.); +#240321 = EDGE_CURVE('',#240314,#240322,#240324,.T.); +#240322 = VERTEX_POINT('',#240323); +#240323 = CARTESIAN_POINT('',(119.34663,-51.461205,1.585)); +#240324 = LINE('',#240325,#240326); +#240325 = CARTESIAN_POINT('',(119.347512,-51.700369,1.585)); +#240326 = VECTOR('',#240327,1.); +#240327 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#240328 = ORIENTED_EDGE('',*,*,#240329,.T.); +#240329 = EDGE_CURVE('',#240322,#240066,#240330,.T.); +#240330 = LINE('',#240331,#240332); +#240331 = CARTESIAN_POINT('',(119.34663,-51.461205,1.585)); +#240332 = VECTOR('',#240333,1.); +#240333 = DIRECTION('',(0.302974833624,0.952998557287,0.)); +#240334 = PLANE('',#240335); +#240335 = AXIS2_PLACEMENT_3D('',#240336,#240337,#240338); +#240336 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240337 = DIRECTION('',(0.,0.,1.)); +#240338 = DIRECTION('',(1.,0.,-0.)); +#240339 = SHELL_BASED_SURFACE_MODEL('',(#240340)); +#240340 = OPEN_SHELL('',(#240341)); +#240341 = ADVANCED_FACE('',(#240342),#240453,.T.); +#240342 = FACE_BOUND('',#240343,.F.); +#240343 = EDGE_LOOP('',(#240344,#240355,#240363,#240372,#240380,#240388, + #240397,#240405,#240413,#240422,#240430,#240439,#240447)); +#240344 = ORIENTED_EDGE('',*,*,#240345,.T.); +#240345 = EDGE_CURVE('',#240346,#240348,#240350,.T.); +#240346 = VERTEX_POINT('',#240347); +#240347 = CARTESIAN_POINT('',(134.732109,-51.258901,1.585)); +#240348 = VERTEX_POINT('',#240349); +#240349 = CARTESIAN_POINT('',(134.759597,-51.134999,1.585)); +#240350 = CIRCLE('',#240351,6.500025906085E-02); +#240351 = AXIS2_PLACEMENT_3D('',#240352,#240353,#240354); +#240352 = CARTESIAN_POINT('',(134.75959751745,-51.19999925905,1.585)); +#240353 = DIRECTION('',(0.,0.,-1.)); +#240354 = DIRECTION('',(-0.42289858311,-0.90617701825,-0.)); +#240355 = ORIENTED_EDGE('',*,*,#240356,.T.); +#240356 = EDGE_CURVE('',#240348,#240357,#240359,.T.); +#240357 = VERTEX_POINT('',#240358); +#240358 = CARTESIAN_POINT('',(135.659597,-51.134999,1.585)); +#240359 = LINE('',#240360,#240361); +#240360 = CARTESIAN_POINT('',(134.759597,-51.134999,1.585)); +#240361 = VECTOR('',#240362,1.); +#240362 = DIRECTION('',(1.,0.,0.)); +#240363 = ORIENTED_EDGE('',*,*,#240364,.T.); +#240364 = EDGE_CURVE('',#240357,#240365,#240367,.T.); +#240365 = VERTEX_POINT('',#240366); +#240366 = CARTESIAN_POINT('',(135.659597,-51.264999,1.585)); +#240367 = CIRCLE('',#240368,6.500000000092E-02); +#240368 = AXIS2_PLACEMENT_3D('',#240369,#240370,#240371); +#240369 = CARTESIAN_POINT('',(135.65959665513,-51.199999,1.585)); +#240370 = DIRECTION('',(0.,0.,-1.)); +#240371 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#240372 = ORIENTED_EDGE('',*,*,#240373,.T.); +#240373 = EDGE_CURVE('',#240365,#240374,#240376,.T.); +#240374 = VERTEX_POINT('',#240375); +#240375 = CARTESIAN_POINT('',(135.052589,-51.264999,1.585)); +#240376 = LINE('',#240377,#240378); +#240377 = CARTESIAN_POINT('',(135.659597,-51.264999,1.585)); +#240378 = VECTOR('',#240379,1.); +#240379 = DIRECTION('',(-1.,0.,0.)); +#240380 = ORIENTED_EDGE('',*,*,#240381,.T.); +#240381 = EDGE_CURVE('',#240374,#240382,#240384,.T.); +#240382 = VERTEX_POINT('',#240383); +#240383 = CARTESIAN_POINT('',(135.429942,-51.441097,1.585)); +#240384 = LINE('',#240385,#240386); +#240385 = CARTESIAN_POINT('',(135.052589,-51.264999,1.585)); +#240386 = VECTOR('',#240387,1.); +#240387 = DIRECTION('',(0.906183201345,-0.422885333866,0.)); +#240388 = ORIENTED_EDGE('',*,*,#240389,.T.); +#240389 = EDGE_CURVE('',#240382,#240390,#240392,.T.); +#240390 = VERTEX_POINT('',#240391); +#240391 = CARTESIAN_POINT('',(135.446353,-51.547935,1.585)); +#240392 = CIRCLE('',#240393,6.500076000412E-02); +#240393 = AXIS2_PLACEMENT_3D('',#240394,#240395,#240396); +#240394 = CARTESIAN_POINT('',(135.40245273384,-51.49999894434,1.585)); +#240395 = DIRECTION('',(0.,0.,-1.)); +#240396 = DIRECTION('',(0.422906842294,0.906173163772,0.)); +#240397 = ORIENTED_EDGE('',*,*,#240398,.T.); +#240398 = EDGE_CURVE('',#240390,#240399,#240401,.T.); +#240399 = VERTEX_POINT('',#240400); +#240400 = CARTESIAN_POINT('',(135.052589,-51.734999,1.585)); +#240401 = LINE('',#240402,#240403); +#240402 = CARTESIAN_POINT('',(135.446353,-51.547935,1.585)); +#240403 = VECTOR('',#240404,1.); +#240404 = DIRECTION('',(-0.903254299692,-0.429105663081,0.)); +#240405 = ORIENTED_EDGE('',*,*,#240406,.T.); +#240406 = EDGE_CURVE('',#240399,#240407,#240409,.T.); +#240407 = VERTEX_POINT('',#240408); +#240408 = CARTESIAN_POINT('',(135.659597,-51.734999,1.585)); +#240409 = LINE('',#240410,#240411); +#240410 = CARTESIAN_POINT('',(135.052589,-51.734999,1.585)); +#240411 = VECTOR('',#240412,1.); +#240412 = DIRECTION('',(1.,0.,0.)); +#240413 = ORIENTED_EDGE('',*,*,#240414,.T.); +#240414 = EDGE_CURVE('',#240407,#240415,#240417,.T.); +#240415 = VERTEX_POINT('',#240416); +#240416 = CARTESIAN_POINT('',(135.659597,-51.864999,1.585)); +#240417 = CIRCLE('',#240418,6.500000000091E-02); +#240418 = AXIS2_PLACEMENT_3D('',#240419,#240420,#240421); +#240419 = CARTESIAN_POINT('',(135.65959665513,-51.799999,1.585)); +#240420 = DIRECTION('',(0.,0.,-1.)); +#240421 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#240422 = ORIENTED_EDGE('',*,*,#240423,.T.); +#240423 = EDGE_CURVE('',#240415,#240424,#240426,.T.); +#240424 = VERTEX_POINT('',#240425); +#240425 = CARTESIAN_POINT('',(134.759597,-51.864999,1.585)); +#240426 = LINE('',#240427,#240428); +#240427 = CARTESIAN_POINT('',(135.659597,-51.864999,1.585)); +#240428 = VECTOR('',#240429,1.); +#240429 = DIRECTION('',(-1.,0.,0.)); +#240430 = ORIENTED_EDGE('',*,*,#240431,.T.); +#240431 = EDGE_CURVE('',#240424,#240432,#240434,.T.); +#240432 = VERTEX_POINT('',#240433); +#240433 = CARTESIAN_POINT('',(134.732109,-51.741097,1.585)); +#240434 = CIRCLE('',#240435,6.500025919344E-02); +#240435 = AXIS2_PLACEMENT_3D('',#240436,#240437,#240438); +#240436 = CARTESIAN_POINT('',(134.75959751805,-51.7999987408,1.585)); +#240437 = DIRECTION('',(0.,0.,-1.)); +#240438 = DIRECTION('',(-7.97006399516E-06,-0.999999999968,-0.)); +#240439 = ORIENTED_EDGE('',*,*,#240440,.T.); +#240440 = EDGE_CURVE('',#240432,#240441,#240443,.T.); +#240441 = VERTEX_POINT('',#240442); +#240442 = CARTESIAN_POINT('',(135.248748,-51.499999,1.585)); +#240443 = LINE('',#240444,#240445); +#240444 = CARTESIAN_POINT('',(134.732109,-51.741097,1.585)); +#240445 = VECTOR('',#240446,1.); +#240446 = DIRECTION('',(0.906183274426,0.422885177266,0.)); +#240447 = ORIENTED_EDGE('',*,*,#240448,.T.); +#240448 = EDGE_CURVE('',#240441,#240346,#240449,.T.); +#240449 = LINE('',#240450,#240451); +#240450 = CARTESIAN_POINT('',(135.248748,-51.499999,1.585)); +#240451 = VECTOR('',#240452,1.); +#240452 = DIRECTION('',(-0.906183274426,0.422885177266,0.)); +#240453 = PLANE('',#240454); +#240454 = AXIS2_PLACEMENT_3D('',#240455,#240456,#240457); +#240455 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240456 = DIRECTION('',(0.,0.,1.)); +#240457 = DIRECTION('',(1.,0.,-0.)); +#240458 = SHELL_BASED_SURFACE_MODEL('',(#240459)); +#240459 = OPEN_SHELL('',(#240460)); +#240460 = ADVANCED_FACE('',(#240461),#240497,.T.); +#240461 = FACE_BOUND('',#240462,.F.); +#240462 = EDGE_LOOP('',(#240463,#240474,#240482,#240491)); +#240463 = ORIENTED_EDGE('',*,*,#240464,.T.); +#240464 = EDGE_CURVE('',#240465,#240467,#240469,.T.); +#240465 = VERTEX_POINT('',#240466); +#240466 = CARTESIAN_POINT('',(162.05107,-51.7931,1.585)); +#240467 = VERTEX_POINT('',#240468); +#240468 = CARTESIAN_POINT('',(162.05107,-51.6731,1.585)); +#240469 = CIRCLE('',#240470,6.000000000042E-02); +#240470 = AXIS2_PLACEMENT_3D('',#240471,#240472,#240473); +#240471 = CARTESIAN_POINT('',(162.05106977441,-51.7331,1.585)); +#240472 = DIRECTION('',(0.,0.,-1.)); +#240473 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#240474 = ORIENTED_EDGE('',*,*,#240475,.T.); +#240475 = EDGE_CURVE('',#240467,#240476,#240478,.T.); +#240476 = VERTEX_POINT('',#240477); +#240477 = CARTESIAN_POINT('',(162.33223,-51.6731,1.585)); +#240478 = LINE('',#240479,#240480); +#240479 = CARTESIAN_POINT('',(162.05107,-51.6731,1.585)); +#240480 = VECTOR('',#240481,1.); +#240481 = DIRECTION('',(1.,0.,0.)); +#240482 = ORIENTED_EDGE('',*,*,#240483,.T.); +#240483 = EDGE_CURVE('',#240476,#240484,#240486,.T.); +#240484 = VERTEX_POINT('',#240485); +#240485 = CARTESIAN_POINT('',(162.33223,-51.7931,1.585)); +#240486 = CIRCLE('',#240487,6.000000000043E-02); +#240487 = AXIS2_PLACEMENT_3D('',#240488,#240489,#240490); +#240488 = CARTESIAN_POINT('',(162.33223022558,-51.7331,1.585)); +#240489 = DIRECTION('',(0.,0.,-1.)); +#240490 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#240491 = ORIENTED_EDGE('',*,*,#240492,.T.); +#240492 = EDGE_CURVE('',#240484,#240465,#240493,.T.); +#240493 = LINE('',#240494,#240495); +#240494 = CARTESIAN_POINT('',(162.33223,-51.7931,1.585)); +#240495 = VECTOR('',#240496,1.); +#240496 = DIRECTION('',(-1.,0.,0.)); +#240497 = PLANE('',#240498); +#240498 = AXIS2_PLACEMENT_3D('',#240499,#240500,#240501); +#240499 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240500 = DIRECTION('',(0.,0.,1.)); +#240501 = DIRECTION('',(1.,0.,-0.)); +#240502 = SHELL_BASED_SURFACE_MODEL('',(#240503)); +#240503 = OPEN_SHELL('',(#240504)); +#240504 = ADVANCED_FACE('',(#240505,#240606),#240689,.T.); +#240505 = FACE_BOUND('',#240506,.F.); +#240506 = EDGE_LOOP('',(#240507,#240518,#240526,#240534,#240542,#240550, + #240559,#240567,#240576,#240584,#240592,#240600)); +#240507 = ORIENTED_EDGE('',*,*,#240508,.T.); +#240508 = EDGE_CURVE('',#240509,#240511,#240513,.T.); +#240509 = VERTEX_POINT('',#240510); +#240510 = CARTESIAN_POINT('',(177.115199,-51.148077,1.585)); +#240511 = VERTEX_POINT('',#240512); +#240512 = CARTESIAN_POINT('',(177.678513,-51.153443,1.585)); +#240513 = CIRCLE('',#240514,0.504047013411); +#240514 = AXIS2_PLACEMENT_3D('',#240515,#240516,#240517); +#240515 = CARTESIAN_POINT('',(177.39287439108,-51.56874286374,1.585)); +#240516 = DIRECTION('',(0.,0.,-1.)); +#240517 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#240518 = ORIENTED_EDGE('',*,*,#240519,.T.); +#240519 = EDGE_CURVE('',#240511,#240520,#240522,.T.); +#240520 = VERTEX_POINT('',#240521); +#240521 = CARTESIAN_POINT('',(177.741967,-51.218973,1.585)); +#240522 = LINE('',#240523,#240524); +#240523 = CARTESIAN_POINT('',(177.678513,-51.153443,1.585)); +#240524 = VECTOR('',#240525,1.); +#240525 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#240526 = ORIENTED_EDGE('',*,*,#240527,.T.); +#240527 = EDGE_CURVE('',#240520,#240528,#240530,.T.); +#240528 = VERTEX_POINT('',#240529); +#240529 = CARTESIAN_POINT('',(177.800028,-51.33942,1.585)); +#240530 = LINE('',#240531,#240532); +#240531 = CARTESIAN_POINT('',(177.741967,-51.218973,1.585)); +#240532 = VECTOR('',#240533,1.); +#240533 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#240534 = ORIENTED_EDGE('',*,*,#240535,.T.); +#240535 = EDGE_CURVE('',#240528,#240536,#240538,.T.); +#240536 = VERTEX_POINT('',#240537); +#240537 = CARTESIAN_POINT('',(177.798642,-51.564766,1.585)); +#240538 = LINE('',#240539,#240540); +#240539 = CARTESIAN_POINT('',(177.800028,-51.33942,1.585)); +#240540 = VECTOR('',#240541,1.); +#240541 = DIRECTION('',(-6.150425501802E-03,-0.999981085954,0.)); +#240542 = ORIENTED_EDGE('',*,*,#240543,.T.); +#240543 = EDGE_CURVE('',#240536,#240544,#240546,.T.); +#240544 = VERTEX_POINT('',#240545); +#240545 = CARTESIAN_POINT('',(178.074434,-51.566207,1.585)); +#240546 = LINE('',#240547,#240548); +#240547 = CARTESIAN_POINT('',(177.798642,-51.564766,1.585)); +#240548 = VECTOR('',#240549,1.); +#240549 = DIRECTION('',(0.999986350217,-5.22488081838E-03,0.)); +#240550 = ORIENTED_EDGE('',*,*,#240551,.T.); +#240551 = EDGE_CURVE('',#240544,#240552,#240554,.T.); +#240552 = VERTEX_POINT('',#240553); +#240553 = CARTESIAN_POINT('',(178.059802,-51.714766,1.585)); +#240554 = CIRCLE('',#240555,7.500006711464E-02); +#240555 = AXIS2_PLACEMENT_3D('',#240556,#240557,#240558); +#240556 = CARTESIAN_POINT('',(178.05980206711,-51.63976593288,1.585)); +#240557 = DIRECTION('',(0.,0.,-1.)); +#240558 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#240559 = ORIENTED_EDGE('',*,*,#240560,.T.); +#240560 = EDGE_CURVE('',#240552,#240561,#240563,.T.); +#240561 = VERTEX_POINT('',#240562); +#240562 = CARTESIAN_POINT('',(177.04517,-51.713325,1.585)); +#240563 = LINE('',#240564,#240565); +#240564 = CARTESIAN_POINT('',(178.059802,-51.714766,1.585)); +#240565 = VECTOR('',#240566,1.); +#240566 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#240567 = ORIENTED_EDGE('',*,*,#240568,.T.); +#240568 = EDGE_CURVE('',#240561,#240569,#240571,.T.); +#240569 = VERTEX_POINT('',#240570); +#240570 = CARTESIAN_POINT('',(177.00097,-51.594569,1.585)); +#240571 = CIRCLE('',#240572,7.424728667613E-02); +#240572 = AXIS2_PLACEMENT_3D('',#240573,#240574,#240575); +#240573 = CARTESIAN_POINT('',(177.05934915462,-51.64044419901,1.585)); +#240574 = DIRECTION('',(0.,0.,-1.)); +#240575 = DIRECTION('',(-0.19097202414,-0.981595479816,-0.)); +#240576 = ORIENTED_EDGE('',*,*,#240577,.T.); +#240577 = EDGE_CURVE('',#240569,#240578,#240580,.T.); +#240578 = VERTEX_POINT('',#240579); +#240579 = CARTESIAN_POINT('',(176.986243,-51.55916,1.585)); +#240580 = LINE('',#240581,#240582); +#240581 = CARTESIAN_POINT('',(177.00097,-51.594569,1.585)); +#240582 = VECTOR('',#240583,1.); +#240583 = DIRECTION('',(-0.384020957699,0.923324376396,0.)); +#240584 = ORIENTED_EDGE('',*,*,#240585,.T.); +#240585 = EDGE_CURVE('',#240578,#240586,#240588,.T.); +#240586 = VERTEX_POINT('',#240587); +#240587 = CARTESIAN_POINT('',(176.987465,-51.334243,1.585)); +#240588 = LINE('',#240589,#240590); +#240589 = CARTESIAN_POINT('',(176.986243,-51.55916,1.585)); +#240590 = VECTOR('',#240591,1.); +#240591 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#240592 = ORIENTED_EDGE('',*,*,#240593,.T.); +#240593 = EDGE_CURVE('',#240586,#240594,#240596,.T.); +#240594 = VERTEX_POINT('',#240595); +#240595 = CARTESIAN_POINT('',(177.049669,-51.21153,1.585)); +#240596 = LINE('',#240597,#240598); +#240597 = CARTESIAN_POINT('',(176.987465,-51.334243,1.585)); +#240598 = VECTOR('',#240599,1.); +#240599 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#240600 = ORIENTED_EDGE('',*,*,#240601,.T.); +#240601 = EDGE_CURVE('',#240594,#240509,#240602,.T.); +#240602 = LINE('',#240603,#240604); +#240603 = CARTESIAN_POINT('',(177.049669,-51.21153,1.585)); +#240604 = VECTOR('',#240605,1.); +#240605 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#240606 = FACE_BOUND('',#240607,.F.); +#240607 = EDGE_LOOP('',(#240608,#240619,#240627,#240635,#240643,#240651, + #240659,#240667,#240675,#240683)); +#240608 = ORIENTED_EDGE('',*,*,#240609,.T.); +#240609 = EDGE_CURVE('',#240610,#240612,#240614,.T.); +#240610 = VERTEX_POINT('',#240611); +#240611 = CARTESIAN_POINT('',(177.586803,-51.272834,1.585)); +#240612 = VERTEX_POINT('',#240613); +#240613 = CARTESIAN_POINT('',(177.199467,-51.272834,1.585)); +#240614 = CIRCLE('',#240615,0.358503491901); +#240615 = AXIS2_PLACEMENT_3D('',#240616,#240617,#240618); +#240616 = CARTESIAN_POINT('',(177.393135,-51.574525,1.585)); +#240617 = DIRECTION('',(0.,0.,1.)); +#240618 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#240619 = ORIENTED_EDGE('',*,*,#240620,.T.); +#240620 = EDGE_CURVE('',#240612,#240621,#240623,.T.); +#240621 = VERTEX_POINT('',#240622); +#240622 = CARTESIAN_POINT('',(177.16906,-51.303241,1.585)); +#240623 = LINE('',#240624,#240625); +#240624 = CARTESIAN_POINT('',(177.199467,-51.272834,1.585)); +#240625 = VECTOR('',#240626,1.); +#240626 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#240627 = ORIENTED_EDGE('',*,*,#240628,.T.); +#240628 = EDGE_CURVE('',#240621,#240629,#240631,.T.); +#240629 = VERTEX_POINT('',#240630); +#240630 = CARTESIAN_POINT('',(177.134802,-51.371757,1.585)); +#240631 = LINE('',#240632,#240633); +#240632 = CARTESIAN_POINT('',(177.16906,-51.303241,1.585)); +#240633 = VECTOR('',#240634,1.); +#240634 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#240635 = ORIENTED_EDGE('',*,*,#240636,.T.); +#240636 = EDGE_CURVE('',#240629,#240637,#240639,.T.); +#240637 = VERTEX_POINT('',#240638); +#240638 = CARTESIAN_POINT('',(177.134802,-51.526823,1.585)); +#240639 = LINE('',#240640,#240641); +#240640 = CARTESIAN_POINT('',(177.134802,-51.371757,1.585)); +#240641 = VECTOR('',#240642,1.); +#240642 = DIRECTION('',(0.,-1.,0.)); +#240643 = ORIENTED_EDGE('',*,*,#240644,.T.); +#240644 = EDGE_CURVE('',#240637,#240645,#240647,.T.); +#240645 = VERTEX_POINT('',#240646); +#240646 = CARTESIAN_POINT('',(177.153773,-51.564766,1.585)); +#240647 = LINE('',#240648,#240649); +#240648 = CARTESIAN_POINT('',(177.134802,-51.526823,1.585)); +#240649 = VECTOR('',#240650,1.); +#240650 = DIRECTION('',(0.447204166258,-0.894431905559,0.)); +#240651 = ORIENTED_EDGE('',*,*,#240652,.T.); +#240652 = EDGE_CURVE('',#240645,#240653,#240655,.T.); +#240653 = VERTEX_POINT('',#240654); +#240654 = CARTESIAN_POINT('',(177.632498,-51.564766,1.585)); +#240655 = LINE('',#240656,#240657); +#240656 = CARTESIAN_POINT('',(177.153773,-51.564766,1.585)); +#240657 = VECTOR('',#240658,1.); +#240658 = DIRECTION('',(1.,0.,0.)); +#240659 = ORIENTED_EDGE('',*,*,#240660,.T.); +#240660 = EDGE_CURVE('',#240653,#240661,#240663,.T.); +#240661 = VERTEX_POINT('',#240662); +#240662 = CARTESIAN_POINT('',(177.651469,-51.526823,1.585)); +#240663 = LINE('',#240664,#240665); +#240664 = CARTESIAN_POINT('',(177.632498,-51.564766,1.585)); +#240665 = VECTOR('',#240666,1.); +#240666 = DIRECTION('',(0.447204166258,0.894431905559,0.)); +#240667 = ORIENTED_EDGE('',*,*,#240668,.T.); +#240668 = EDGE_CURVE('',#240661,#240669,#240671,.T.); +#240669 = VERTEX_POINT('',#240670); +#240670 = CARTESIAN_POINT('',(177.651469,-51.371757,1.585)); +#240671 = LINE('',#240672,#240673); +#240672 = CARTESIAN_POINT('',(177.651469,-51.526823,1.585)); +#240673 = VECTOR('',#240674,1.); +#240674 = DIRECTION('',(0.,1.,0.)); +#240675 = ORIENTED_EDGE('',*,*,#240676,.T.); +#240676 = EDGE_CURVE('',#240669,#240677,#240679,.T.); +#240677 = VERTEX_POINT('',#240678); +#240678 = CARTESIAN_POINT('',(177.617211,-51.303241,1.585)); +#240679 = LINE('',#240680,#240681); +#240680 = CARTESIAN_POINT('',(177.651469,-51.371757,1.585)); +#240681 = VECTOR('',#240682,1.); +#240682 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#240683 = ORIENTED_EDGE('',*,*,#240684,.T.); +#240684 = EDGE_CURVE('',#240677,#240610,#240685,.T.); +#240685 = LINE('',#240686,#240687); +#240686 = CARTESIAN_POINT('',(177.617211,-51.303241,1.585)); +#240687 = VECTOR('',#240688,1.); +#240688 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#240689 = PLANE('',#240690); +#240690 = AXIS2_PLACEMENT_3D('',#240691,#240692,#240693); +#240691 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240692 = DIRECTION('',(0.,0.,1.)); +#240693 = DIRECTION('',(1.,0.,-0.)); +#240694 = SHELL_BASED_SURFACE_MODEL('',(#240695)); +#240695 = OPEN_SHELL('',(#240696)); +#240696 = ADVANCED_FACE('',(#240697),#240799,.T.); +#240697 = FACE_BOUND('',#240698,.F.); +#240698 = EDGE_LOOP('',(#240699,#240709,#240718,#240726,#240734,#240743, + #240751,#240759,#240768,#240776,#240784,#240793)); +#240699 = ORIENTED_EDGE('',*,*,#240700,.T.); +#240700 = EDGE_CURVE('',#240701,#240703,#240705,.T.); +#240701 = VERTEX_POINT('',#240702); +#240702 = CARTESIAN_POINT('',(127.509596,-51.264735,1.585)); +#240703 = VERTEX_POINT('',#240704); +#240704 = CARTESIAN_POINT('',(127.923541,-50.988773,1.585)); +#240705 = LINE('',#240706,#240707); +#240706 = CARTESIAN_POINT('',(127.509596,-51.264735,1.585)); +#240707 = VECTOR('',#240708,1.); +#240708 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#240709 = ORIENTED_EDGE('',*,*,#240710,.T.); +#240710 = EDGE_CURVE('',#240703,#240711,#240713,.T.); +#240711 = VERTEX_POINT('',#240712); +#240712 = CARTESIAN_POINT('',(127.995652,-51.096939,1.585)); +#240713 = CIRCLE('',#240714,6.499976899535E-02); +#240714 = AXIS2_PLACEMENT_3D('',#240715,#240716,#240717); +#240715 = CARTESIAN_POINT('',(127.95959612917,-51.04285624722,1.585)); +#240716 = DIRECTION('',(0.,0.,-1.)); +#240717 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#240718 = ORIENTED_EDGE('',*,*,#240719,.T.); +#240719 = EDGE_CURVE('',#240711,#240720,#240722,.T.); +#240720 = VERTEX_POINT('',#240721); +#240721 = CARTESIAN_POINT('',(127.626776,-51.342856,1.585)); +#240722 = LINE('',#240723,#240724); +#240723 = CARTESIAN_POINT('',(127.995652,-51.096939,1.585)); +#240724 = VECTOR('',#240725,1.); +#240725 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#240726 = ORIENTED_EDGE('',*,*,#240727,.T.); +#240727 = EDGE_CURVE('',#240720,#240728,#240730,.T.); +#240728 = VERTEX_POINT('',#240729); +#240729 = CARTESIAN_POINT('',(127.995652,-51.588773,1.585)); +#240730 = LINE('',#240731,#240732); +#240731 = CARTESIAN_POINT('',(127.626776,-51.342856,1.585)); +#240732 = VECTOR('',#240733,1.); +#240733 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#240734 = ORIENTED_EDGE('',*,*,#240735,.T.); +#240735 = EDGE_CURVE('',#240728,#240736,#240738,.T.); +#240736 = VERTEX_POINT('',#240737); +#240737 = CARTESIAN_POINT('',(127.923541,-51.696939,1.585)); +#240738 = CIRCLE('',#240739,6.49997689954E-02); +#240739 = AXIS2_PLACEMENT_3D('',#240740,#240741,#240742); +#240740 = CARTESIAN_POINT('',(127.95959687747,-51.64285625164,1.585)); +#240741 = DIRECTION('',(0.,0.,-1.)); +#240742 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#240743 = ORIENTED_EDGE('',*,*,#240744,.T.); +#240744 = EDGE_CURVE('',#240736,#240745,#240747,.T.); +#240745 = VERTEX_POINT('',#240746); +#240746 = CARTESIAN_POINT('',(127.509596,-51.420976,1.585)); +#240747 = LINE('',#240748,#240749); +#240748 = CARTESIAN_POINT('',(127.923541,-51.696939,1.585)); +#240749 = VECTOR('',#240750,1.); +#240750 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#240751 = ORIENTED_EDGE('',*,*,#240752,.T.); +#240752 = EDGE_CURVE('',#240745,#240753,#240755,.T.); +#240753 = VERTEX_POINT('',#240754); +#240754 = CARTESIAN_POINT('',(127.095653,-51.696939,1.585)); +#240755 = LINE('',#240756,#240757); +#240756 = CARTESIAN_POINT('',(127.509596,-51.420976,1.585)); +#240757 = VECTOR('',#240758,1.); +#240758 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#240759 = ORIENTED_EDGE('',*,*,#240760,.T.); +#240760 = EDGE_CURVE('',#240753,#240761,#240763,.T.); +#240761 = VERTEX_POINT('',#240762); +#240762 = CARTESIAN_POINT('',(127.023541,-51.588773,1.585)); +#240763 = CIRCLE('',#240764,6.500004634766E-02); +#240764 = AXIS2_PLACEMENT_3D('',#240765,#240766,#240767); +#240765 = CARTESIAN_POINT('',(127.05959737004,-51.6428557533,1.585)); +#240766 = DIRECTION('',(0.,0.,-1.)); +#240767 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#240768 = ORIENTED_EDGE('',*,*,#240769,.T.); +#240769 = EDGE_CURVE('',#240761,#240770,#240772,.T.); +#240770 = VERTEX_POINT('',#240771); +#240771 = CARTESIAN_POINT('',(127.392416,-51.342856,1.585)); +#240772 = LINE('',#240773,#240774); +#240773 = CARTESIAN_POINT('',(127.023541,-51.588773,1.585)); +#240774 = VECTOR('',#240775,1.); +#240775 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#240776 = ORIENTED_EDGE('',*,*,#240777,.T.); +#240777 = EDGE_CURVE('',#240770,#240778,#240780,.T.); +#240778 = VERTEX_POINT('',#240779); +#240779 = CARTESIAN_POINT('',(127.023541,-51.096939,1.585)); +#240780 = LINE('',#240781,#240782); +#240781 = CARTESIAN_POINT('',(127.392416,-51.342856,1.585)); +#240782 = VECTOR('',#240783,1.); +#240783 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#240784 = ORIENTED_EDGE('',*,*,#240785,.T.); +#240785 = EDGE_CURVE('',#240778,#240786,#240788,.T.); +#240786 = VERTEX_POINT('',#240787); +#240787 = CARTESIAN_POINT('',(127.095653,-50.988773,1.585)); +#240788 = CIRCLE('',#240789,6.500004634723E-02); +#240789 = AXIS2_PLACEMENT_3D('',#240790,#240791,#240792); +#240790 = CARTESIAN_POINT('',(127.05959731405,-51.04285620937,1.585)); +#240791 = DIRECTION('',(0.,0.,-1.)); +#240792 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#240793 = ORIENTED_EDGE('',*,*,#240794,.T.); +#240794 = EDGE_CURVE('',#240786,#240701,#240795,.T.); +#240795 = LINE('',#240796,#240797); +#240796 = CARTESIAN_POINT('',(127.095653,-50.988773,1.585)); +#240797 = VECTOR('',#240798,1.); +#240798 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#240799 = PLANE('',#240800); +#240800 = AXIS2_PLACEMENT_3D('',#240801,#240802,#240803); +#240801 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240802 = DIRECTION('',(0.,0.,1.)); +#240803 = DIRECTION('',(1.,0.,-0.)); +#240804 = SHELL_BASED_SURFACE_MODEL('',(#240805)); +#240805 = OPEN_SHELL('',(#240806)); +#240806 = ADVANCED_FACE('',(#240807),#240867,.T.); +#240807 = FACE_BOUND('',#240808,.F.); +#240808 = EDGE_LOOP('',(#240809,#240820,#240828,#240837,#240845,#240853, + #240861)); +#240809 = ORIENTED_EDGE('',*,*,#240810,.T.); +#240810 = EDGE_CURVE('',#240811,#240813,#240815,.T.); +#240811 = VERTEX_POINT('',#240812); +#240812 = CARTESIAN_POINT('',(84.763037,-50.748267,1.585)); +#240813 = VERTEX_POINT('',#240814); +#240814 = CARTESIAN_POINT('',(84.81165,-50.6531,1.585)); +#240815 = CIRCLE('',#240816,5.999933016277E-02); +#240816 = AXIS2_PLACEMENT_3D('',#240817,#240818,#240819); +#240817 = CARTESIAN_POINT('',(84.811649288754,-50.71309933015,1.585)); +#240818 = DIRECTION('',(0.,0.,-1.)); +#240819 = DIRECTION('',(-0.810213857757,-0.586134374268,-0.)); +#240820 = ORIENTED_EDGE('',*,*,#240821,.T.); +#240821 = EDGE_CURVE('',#240813,#240822,#240824,.T.); +#240822 = VERTEX_POINT('',#240823); +#240823 = CARTESIAN_POINT('',(85.49165,-50.6531,1.585)); +#240824 = LINE('',#240825,#240826); +#240825 = CARTESIAN_POINT('',(84.81165,-50.6531,1.585)); +#240826 = VECTOR('',#240827,1.); +#240827 = DIRECTION('',(1.,0.,0.)); +#240828 = ORIENTED_EDGE('',*,*,#240829,.T.); +#240829 = EDGE_CURVE('',#240822,#240830,#240832,.T.); +#240830 = VERTEX_POINT('',#240831); +#240831 = CARTESIAN_POINT('',(85.540263,-50.748267,1.585)); +#240832 = CIRCLE('',#240833,6.000013845259E-02); +#240833 = AXIS2_PLACEMENT_3D('',#240834,#240835,#240836); +#240834 = CARTESIAN_POINT('',(85.491649128906,-50.71310013844,1.585)); +#240835 = DIRECTION('',(0.,0.,-1.)); +#240836 = DIRECTION('',(1.451820792249E-05,0.999999999895,0.)); +#240837 = ORIENTED_EDGE('',*,*,#240838,.T.); +#240838 = EDGE_CURVE('',#240830,#240839,#240841,.T.); +#240839 = VERTEX_POINT('',#240840); +#240840 = CARTESIAN_POINT('',(85.200263,-51.218267,1.585)); +#240841 = LINE('',#240842,#240843); +#240842 = CARTESIAN_POINT('',(85.540263,-50.748267,1.585)); +#240843 = VECTOR('',#240844,1.); +#240844 = DIRECTION('',(-0.586119786529,-0.81022441079,0.)); +#240845 = ORIENTED_EDGE('',*,*,#240846,.T.); +#240846 = EDGE_CURVE('',#240839,#240847,#240849,.T.); +#240847 = VERTEX_POINT('',#240848); +#240848 = CARTESIAN_POINT('',(85.161158,-51.242342,1.585)); +#240849 = LINE('',#240850,#240851); +#240850 = CARTESIAN_POINT('',(85.200263,-51.218267,1.585)); +#240851 = VECTOR('',#240852,1.); +#240852 = DIRECTION('',(-0.851557364128,-0.524261438215,0.)); +#240853 = ORIENTED_EDGE('',*,*,#240854,.T.); +#240854 = EDGE_CURVE('',#240847,#240855,#240857,.T.); +#240855 = VERTEX_POINT('',#240856); +#240856 = CARTESIAN_POINT('',(85.116483,-51.231713,1.585)); +#240857 = LINE('',#240858,#240859); +#240858 = CARTESIAN_POINT('',(85.161158,-51.242342,1.585)); +#240859 = VECTOR('',#240860,1.); +#240860 = DIRECTION('',(-0.972844986713,0.231457624259,0.)); +#240861 = ORIENTED_EDGE('',*,*,#240862,.T.); +#240862 = EDGE_CURVE('',#240855,#240811,#240863,.T.); +#240863 = LINE('',#240864,#240865); +#240864 = CARTESIAN_POINT('',(85.116483,-51.231713,1.585)); +#240865 = VECTOR('',#240866,1.); +#240866 = DIRECTION('',(-0.590189148022,0.807264993393,0.)); +#240867 = PLANE('',#240868); +#240868 = AXIS2_PLACEMENT_3D('',#240869,#240870,#240871); +#240869 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240870 = DIRECTION('',(0.,0.,1.)); +#240871 = DIRECTION('',(1.,0.,-0.)); +#240872 = SHELL_BASED_SURFACE_MODEL('',(#240873)); +#240873 = OPEN_SHELL('',(#240874)); +#240874 = ADVANCED_FACE('',(#240875),#240936,.T.); +#240875 = FACE_BOUND('',#240876,.F.); +#240876 = EDGE_LOOP('',(#240877,#240888,#240896,#240905,#240913,#240921, + #240930)); +#240877 = ORIENTED_EDGE('',*,*,#240878,.T.); +#240878 = EDGE_CURVE('',#240879,#240881,#240883,.T.); +#240879 = VERTEX_POINT('',#240880); +#240880 = CARTESIAN_POINT('',(86.82165,-50.8731,1.585)); +#240881 = VERTEX_POINT('',#240882); +#240882 = CARTESIAN_POINT('',(86.88165,-50.8131,1.585)); +#240883 = CIRCLE('',#240884,5.999932016258E-02); +#240884 = AXIS2_PLACEMENT_3D('',#240885,#240886,#240887); +#240885 = CARTESIAN_POINT('',(86.881649320159,-50.87309932015,1.585)); +#240886 = DIRECTION('',(0.,0.,-1.)); +#240887 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#240888 = ORIENTED_EDGE('',*,*,#240889,.T.); +#240889 = EDGE_CURVE('',#240881,#240890,#240892,.T.); +#240890 = VERTEX_POINT('',#240891); +#240891 = CARTESIAN_POINT('',(93.30165,-50.8131,1.585)); +#240892 = LINE('',#240893,#240894); +#240893 = CARTESIAN_POINT('',(86.88165,-50.8131,1.585)); +#240894 = VECTOR('',#240895,1.); +#240895 = DIRECTION('',(1.,0.,0.)); +#240896 = ORIENTED_EDGE('',*,*,#240897,.T.); +#240897 = EDGE_CURVE('',#240890,#240898,#240900,.T.); +#240898 = VERTEX_POINT('',#240899); +#240899 = CARTESIAN_POINT('',(93.30165,-50.9331,1.585)); +#240900 = CIRCLE('',#240901,6.000000000043E-02); +#240901 = AXIS2_PLACEMENT_3D('',#240902,#240903,#240904); +#240902 = CARTESIAN_POINT('',(93.301650225588,-50.8731,1.585)); +#240903 = DIRECTION('',(0.,0.,-1.)); +#240904 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#240905 = ORIENTED_EDGE('',*,*,#240906,.T.); +#240906 = EDGE_CURVE('',#240898,#240907,#240909,.T.); +#240907 = VERTEX_POINT('',#240908); +#240908 = CARTESIAN_POINT('',(86.94165,-50.9331,1.585)); +#240909 = LINE('',#240910,#240911); +#240910 = CARTESIAN_POINT('',(93.30165,-50.9331,1.585)); +#240911 = VECTOR('',#240912,1.); +#240912 = DIRECTION('',(-1.,0.,0.)); +#240913 = ORIENTED_EDGE('',*,*,#240914,.T.); +#240914 = EDGE_CURVE('',#240907,#240915,#240917,.T.); +#240915 = VERTEX_POINT('',#240916); +#240916 = CARTESIAN_POINT('',(86.94165,-51.1431,1.585)); +#240917 = LINE('',#240918,#240919); +#240918 = CARTESIAN_POINT('',(86.94165,-50.9331,1.585)); +#240919 = VECTOR('',#240920,1.); +#240920 = DIRECTION('',(0.,-1.,0.)); +#240921 = ORIENTED_EDGE('',*,*,#240922,.T.); +#240922 = EDGE_CURVE('',#240915,#240923,#240925,.T.); +#240923 = VERTEX_POINT('',#240924); +#240924 = CARTESIAN_POINT('',(86.82165,-51.1431,1.585)); +#240925 = CIRCLE('',#240926,6.000000000042E-02); +#240926 = AXIS2_PLACEMENT_3D('',#240927,#240928,#240929); +#240927 = CARTESIAN_POINT('',(86.88165,-51.14310022558,1.585)); +#240928 = DIRECTION('',(0.,0.,-1.)); +#240929 = DIRECTION('',(0.999999999993,3.759794372108E-06,0.)); +#240930 = ORIENTED_EDGE('',*,*,#240931,.T.); +#240931 = EDGE_CURVE('',#240923,#240879,#240932,.T.); +#240932 = LINE('',#240933,#240934); +#240933 = CARTESIAN_POINT('',(86.82165,-51.1431,1.585)); +#240934 = VECTOR('',#240935,1.); +#240935 = DIRECTION('',(0.,1.,0.)); +#240936 = PLANE('',#240937); +#240937 = AXIS2_PLACEMENT_3D('',#240938,#240939,#240940); +#240938 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240939 = DIRECTION('',(0.,0.,1.)); +#240940 = DIRECTION('',(1.,0.,-0.)); +#240941 = SHELL_BASED_SURFACE_MODEL('',(#240942)); +#240942 = OPEN_SHELL('',(#240943)); +#240943 = ADVANCED_FACE('',(#240944,#241055),#241114,.T.); +#240944 = FACE_BOUND('',#240945,.F.); +#240945 = EDGE_LOOP('',(#240946,#240956,#240965,#240973,#240981,#240989, + #240998,#241006,#241015,#241023,#241032,#241040,#241049)); +#240946 = ORIENTED_EDGE('',*,*,#240947,.T.); +#240947 = EDGE_CURVE('',#240948,#240950,#240952,.T.); +#240948 = VERTEX_POINT('',#240949); +#240949 = CARTESIAN_POINT('',(177.325168,-50.502936,1.585)); +#240950 = VERTEX_POINT('',#240951); +#240951 = CARTESIAN_POINT('',(177.696273,-50.244923,1.585)); +#240952 = LINE('',#240953,#240954); +#240953 = CARTESIAN_POINT('',(177.325168,-50.502936,1.585)); +#240954 = VECTOR('',#240955,1.); +#240955 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#240956 = ORIENTED_EDGE('',*,*,#240957,.T.); +#240957 = EDGE_CURVE('',#240950,#240958,#240960,.T.); +#240958 = VERTEX_POINT('',#240959); +#240959 = CARTESIAN_POINT('',(177.769479,-50.375018,1.585)); +#240960 = CIRCLE('',#240961,7.500005951702E-02); +#240961 = AXIS2_PLACEMENT_3D('',#240962,#240963,#240964); +#240962 = CARTESIAN_POINT('',(177.72646874739,-50.31357593705,1.585)); +#240963 = DIRECTION('',(0.,0.,-1.)); +#240964 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#240965 = ORIENTED_EDGE('',*,*,#240966,.T.); +#240966 = EDGE_CURVE('',#240958,#240967,#240969,.T.); +#240967 = VERTEX_POINT('',#240968); +#240968 = CARTESIAN_POINT('',(177.325278,-50.685958,1.585)); +#240969 = LINE('',#240970,#240971); +#240970 = CARTESIAN_POINT('',(177.769479,-50.375018,1.585)); +#240971 = VECTOR('',#240972,1.); +#240972 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#240973 = ORIENTED_EDGE('',*,*,#240974,.T.); +#240974 = EDGE_CURVE('',#240967,#240975,#240977,.T.); +#240975 = VERTEX_POINT('',#240976); +#240976 = CARTESIAN_POINT('',(177.325278,-50.810004,1.585)); +#240977 = LINE('',#240978,#240979); +#240978 = CARTESIAN_POINT('',(177.325278,-50.685958,1.585)); +#240979 = VECTOR('',#240980,1.); +#240980 = DIRECTION('',(0.,-1.,0.)); +#240981 = ORIENTED_EDGE('',*,*,#240982,.T.); +#240982 = EDGE_CURVE('',#240975,#240983,#240985,.T.); +#240983 = VERTEX_POINT('',#240984); +#240984 = CARTESIAN_POINT('',(177.741101,-50.811445,1.585)); +#240985 = LINE('',#240986,#240987); +#240986 = CARTESIAN_POINT('',(177.325278,-50.810004,1.585)); +#240987 = VECTOR('',#240988,1.); +#240988 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#240989 = ORIENTED_EDGE('',*,*,#240990,.T.); +#240990 = EDGE_CURVE('',#240983,#240991,#240993,.T.); +#240991 = VERTEX_POINT('',#240992); +#240992 = CARTESIAN_POINT('',(177.726469,-50.960004,1.585)); +#240993 = CIRCLE('',#240994,7.500006711464E-02); +#240994 = AXIS2_PLACEMENT_3D('',#240995,#240996,#240997); +#240995 = CARTESIAN_POINT('',(177.72646906711,-50.88500393288,1.585)); +#240996 = DIRECTION('',(0.,0.,-1.)); +#240997 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#240998 = ORIENTED_EDGE('',*,*,#240999,.T.); +#240999 = EDGE_CURVE('',#240991,#241000,#241002,.T.); +#241000 = VERTEX_POINT('',#241001); +#241001 = CARTESIAN_POINT('',(176.711837,-50.958563,1.585)); +#241002 = LINE('',#241003,#241004); +#241003 = CARTESIAN_POINT('',(177.726469,-50.960004,1.585)); +#241004 = VECTOR('',#241005,1.); +#241005 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#241006 = ORIENTED_EDGE('',*,*,#241007,.T.); +#241007 = EDGE_CURVE('',#241000,#241008,#241010,.T.); +#241008 = VERTEX_POINT('',#241009); +#241009 = CARTESIAN_POINT('',(176.651469,-50.885004,1.585)); +#241010 = CIRCLE('',#241011,7.500074938983E-02); +#241011 = AXIS2_PLACEMENT_3D('',#241012,#241013,#241014); +#241012 = CARTESIAN_POINT('',(176.72646974938,-50.88500353389,1.585)); +#241013 = DIRECTION('',(0.,0.,-1.)); +#241014 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#241015 = ORIENTED_EDGE('',*,*,#241016,.T.); +#241016 = EDGE_CURVE('',#241008,#241017,#241019,.T.); +#241017 = VERTEX_POINT('',#241018); +#241018 = CARTESIAN_POINT('',(176.654132,-50.484243,1.585)); +#241019 = LINE('',#241020,#241021); +#241020 = CARTESIAN_POINT('',(176.651469,-50.885004,1.585)); +#241021 = VECTOR('',#241022,1.); +#241022 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#241023 = ORIENTED_EDGE('',*,*,#241024,.T.); +#241024 = EDGE_CURVE('',#241017,#241025,#241027,.T.); +#241025 = VERTEX_POINT('',#241026); +#241026 = CARTESIAN_POINT('',(176.902313,-50.240017,1.585)); +#241027 = CIRCLE('',#241028,0.348621382901); +#241028 = AXIS2_PLACEMENT_3D('',#241029,#241030,#241031); +#241029 = CARTESIAN_POINT('',(176.99007322951,-50.57741144383,1.585)); +#241030 = DIRECTION('',(0.,0.,-1.)); +#241031 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#241032 = ORIENTED_EDGE('',*,*,#241033,.T.); +#241033 = EDGE_CURVE('',#241025,#241034,#241036,.T.); +#241034 = VERTEX_POINT('',#241035); +#241035 = CARTESIAN_POINT('',(177.074434,-50.240017,1.585)); +#241036 = LINE('',#241037,#241038); +#241037 = CARTESIAN_POINT('',(176.902313,-50.240017,1.585)); +#241038 = VECTOR('',#241039,1.); +#241039 = DIRECTION('',(1.,0.,0.)); +#241040 = ORIENTED_EDGE('',*,*,#241041,.T.); +#241041 = EDGE_CURVE('',#241034,#241042,#241044,.T.); +#241042 = VERTEX_POINT('',#241043); +#241043 = CARTESIAN_POINT('',(177.323837,-50.48942,1.585)); +#241044 = CIRCLE('',#241045,0.347870264855); +#241045 = AXIS2_PLACEMENT_3D('',#241046,#241047,#241048); +#241046 = CARTESIAN_POINT('',(176.98710626502,-50.57674773497,1.585)); +#241047 = DIRECTION('',(0.,0.,-1.)); +#241048 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#241049 = ORIENTED_EDGE('',*,*,#241050,.T.); +#241050 = EDGE_CURVE('',#241042,#240948,#241051,.T.); +#241051 = LINE('',#241052,#241053); +#241052 = CARTESIAN_POINT('',(177.323837,-50.48942,1.585)); +#241053 = VECTOR('',#241054,1.); +#241054 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#241055 = FACE_BOUND('',#241056,.F.); +#241056 = EDGE_LOOP('',(#241057,#241068,#241076,#241084,#241092,#241100, + #241108)); +#241057 = ORIENTED_EDGE('',*,*,#241058,.T.); +#241058 = EDGE_CURVE('',#241059,#241061,#241063,.T.); +#241059 = VERTEX_POINT('',#241060); +#241060 = CARTESIAN_POINT('',(177.110613,-50.422834,1.585)); +#241061 = VERTEX_POINT('',#241062); +#241062 = CARTESIAN_POINT('',(176.835727,-50.453241,1.585)); +#241063 = CIRCLE('',#241064,0.198386215365); +#241064 = AXIS2_PLACEMENT_3D('',#241065,#241066,#241067); +#241065 = CARTESIAN_POINT('',(176.98880995783,-50.5794261753,1.585)); +#241066 = DIRECTION('',(0.,0.,1.)); +#241067 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#241068 = ORIENTED_EDGE('',*,*,#241069,.T.); +#241069 = EDGE_CURVE('',#241061,#241070,#241072,.T.); +#241070 = VERTEX_POINT('',#241071); +#241071 = CARTESIAN_POINT('',(176.801469,-50.521757,1.585)); +#241072 = LINE('',#241073,#241074); +#241073 = CARTESIAN_POINT('',(176.835727,-50.453241,1.585)); +#241074 = VECTOR('',#241075,1.); +#241075 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#241076 = ORIENTED_EDGE('',*,*,#241077,.T.); +#241077 = EDGE_CURVE('',#241070,#241078,#241080,.T.); +#241078 = VERTEX_POINT('',#241079); +#241079 = CARTESIAN_POINT('',(176.801469,-50.810004,1.585)); +#241080 = LINE('',#241081,#241082); +#241081 = CARTESIAN_POINT('',(176.801469,-50.521757,1.585)); +#241082 = VECTOR('',#241083,1.); +#241083 = DIRECTION('',(0.,-1.,0.)); +#241084 = ORIENTED_EDGE('',*,*,#241085,.T.); +#241085 = EDGE_CURVE('',#241078,#241086,#241088,.T.); +#241086 = VERTEX_POINT('',#241087); +#241087 = CARTESIAN_POINT('',(177.175278,-50.810004,1.585)); +#241088 = LINE('',#241089,#241090); +#241089 = CARTESIAN_POINT('',(176.801469,-50.810004,1.585)); +#241090 = VECTOR('',#241091,1.); +#241091 = DIRECTION('',(1.,0.,0.)); +#241092 = ORIENTED_EDGE('',*,*,#241093,.T.); +#241093 = EDGE_CURVE('',#241086,#241094,#241096,.T.); +#241094 = VERTEX_POINT('',#241095); +#241095 = CARTESIAN_POINT('',(177.175278,-50.521757,1.585)); +#241096 = LINE('',#241097,#241098); +#241097 = CARTESIAN_POINT('',(177.175278,-50.810004,1.585)); +#241098 = VECTOR('',#241099,1.); +#241099 = DIRECTION('',(0.,1.,0.)); +#241100 = ORIENTED_EDGE('',*,*,#241101,.T.); +#241101 = EDGE_CURVE('',#241094,#241102,#241104,.T.); +#241102 = VERTEX_POINT('',#241103); +#241103 = CARTESIAN_POINT('',(177.14102,-50.453241,1.585)); +#241104 = LINE('',#241105,#241106); +#241105 = CARTESIAN_POINT('',(177.175278,-50.521757,1.585)); +#241106 = VECTOR('',#241107,1.); +#241107 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#241108 = ORIENTED_EDGE('',*,*,#241109,.T.); +#241109 = EDGE_CURVE('',#241102,#241059,#241110,.T.); +#241110 = LINE('',#241111,#241112); +#241111 = CARTESIAN_POINT('',(177.14102,-50.453241,1.585)); +#241112 = VECTOR('',#241113,1.); +#241113 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241114 = PLANE('',#241115); +#241115 = AXIS2_PLACEMENT_3D('',#241116,#241117,#241118); +#241116 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241117 = DIRECTION('',(0.,0.,1.)); +#241118 = DIRECTION('',(1.,0.,-0.)); +#241119 = SHELL_BASED_SURFACE_MODEL('',(#241120)); +#241120 = OPEN_SHELL('',(#241121)); +#241121 = ADVANCED_FACE('',(#241122),#241158,.T.); +#241122 = FACE_BOUND('',#241123,.F.); +#241123 = EDGE_LOOP('',(#241124,#241135,#241143,#241152)); +#241124 = ORIENTED_EDGE('',*,*,#241125,.T.); +#241125 = EDGE_CURVE('',#241126,#241128,#241130,.T.); +#241126 = VERTEX_POINT('',#241127); +#241127 = CARTESIAN_POINT('',(162.05107,-50.7731,1.585)); +#241128 = VERTEX_POINT('',#241129); +#241129 = CARTESIAN_POINT('',(162.05107,-50.6531,1.585)); +#241130 = CIRCLE('',#241131,6.000000000042E-02); +#241131 = AXIS2_PLACEMENT_3D('',#241132,#241133,#241134); +#241132 = CARTESIAN_POINT('',(162.05106977441,-50.7131,1.585)); +#241133 = DIRECTION('',(0.,0.,-1.)); +#241134 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#241135 = ORIENTED_EDGE('',*,*,#241136,.T.); +#241136 = EDGE_CURVE('',#241128,#241137,#241139,.T.); +#241137 = VERTEX_POINT('',#241138); +#241138 = CARTESIAN_POINT('',(162.33223,-50.6531,1.585)); +#241139 = LINE('',#241140,#241141); +#241140 = CARTESIAN_POINT('',(162.05107,-50.6531,1.585)); +#241141 = VECTOR('',#241142,1.); +#241142 = DIRECTION('',(1.,0.,0.)); +#241143 = ORIENTED_EDGE('',*,*,#241144,.T.); +#241144 = EDGE_CURVE('',#241137,#241145,#241147,.T.); +#241145 = VERTEX_POINT('',#241146); +#241146 = CARTESIAN_POINT('',(162.33223,-50.7731,1.585)); +#241147 = CIRCLE('',#241148,6.000000000042E-02); +#241148 = AXIS2_PLACEMENT_3D('',#241149,#241150,#241151); +#241149 = CARTESIAN_POINT('',(162.33223022558,-50.7131,1.585)); +#241150 = DIRECTION('',(0.,0.,-1.)); +#241151 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#241152 = ORIENTED_EDGE('',*,*,#241153,.T.); +#241153 = EDGE_CURVE('',#241145,#241126,#241154,.T.); +#241154 = LINE('',#241155,#241156); +#241155 = CARTESIAN_POINT('',(162.33223,-50.7731,1.585)); +#241156 = VECTOR('',#241157,1.); +#241157 = DIRECTION('',(-1.,0.,0.)); +#241158 = PLANE('',#241159); +#241159 = AXIS2_PLACEMENT_3D('',#241160,#241161,#241162); +#241160 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241161 = DIRECTION('',(0.,0.,1.)); +#241162 = DIRECTION('',(1.,0.,-0.)); +#241163 = SHELL_BASED_SURFACE_MODEL('',(#241164)); +#241164 = OPEN_SHELL('',(#241165)); +#241165 = ADVANCED_FACE('',(#241166),#241202,.T.); +#241166 = FACE_BOUND('',#241167,.F.); +#241167 = EDGE_LOOP('',(#241168,#241179,#241187,#241196)); +#241168 = ORIENTED_EDGE('',*,*,#241169,.T.); +#241169 = EDGE_CURVE('',#241170,#241172,#241174,.T.); +#241170 = VERTEX_POINT('',#241171); +#241171 = CARTESIAN_POINT('',(179.480398,-50.5481,1.585)); +#241172 = VERTEX_POINT('',#241173); +#241173 = CARTESIAN_POINT('',(179.480398,-50.4281,1.585)); +#241174 = CIRCLE('',#241175,6.000000000042E-02); +#241175 = AXIS2_PLACEMENT_3D('',#241176,#241177,#241178); +#241176 = CARTESIAN_POINT('',(179.48039777441,-50.4881,1.585)); +#241177 = DIRECTION('',(0.,0.,-1.)); +#241178 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#241179 = ORIENTED_EDGE('',*,*,#241180,.T.); +#241180 = EDGE_CURVE('',#241172,#241181,#241183,.T.); +#241181 = VERTEX_POINT('',#241182); +#241182 = CARTESIAN_POINT('',(180.002902,-50.4281,1.585)); +#241183 = LINE('',#241184,#241185); +#241184 = CARTESIAN_POINT('',(179.480398,-50.4281,1.585)); +#241185 = VECTOR('',#241186,1.); +#241186 = DIRECTION('',(1.,0.,0.)); +#241187 = ORIENTED_EDGE('',*,*,#241188,.T.); +#241188 = EDGE_CURVE('',#241181,#241189,#241191,.T.); +#241189 = VERTEX_POINT('',#241190); +#241190 = CARTESIAN_POINT('',(180.002902,-50.5481,1.585)); +#241191 = CIRCLE('',#241192,6.000000000043E-02); +#241192 = AXIS2_PLACEMENT_3D('',#241193,#241194,#241195); +#241193 = CARTESIAN_POINT('',(180.00290222558,-50.4881,1.585)); +#241194 = DIRECTION('',(0.,0.,-1.)); +#241195 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#241196 = ORIENTED_EDGE('',*,*,#241197,.T.); +#241197 = EDGE_CURVE('',#241189,#241170,#241198,.T.); +#241198 = LINE('',#241199,#241200); +#241199 = CARTESIAN_POINT('',(180.002902,-50.5481,1.585)); +#241200 = VECTOR('',#241201,1.); +#241201 = DIRECTION('',(-1.,0.,0.)); +#241202 = PLANE('',#241203); +#241203 = AXIS2_PLACEMENT_3D('',#241204,#241205,#241206); +#241204 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241205 = DIRECTION('',(0.,0.,1.)); +#241206 = DIRECTION('',(1.,0.,-0.)); +#241207 = SHELL_BASED_SURFACE_MODEL('',(#241208)); +#241208 = OPEN_SHELL('',(#241209)); +#241209 = ADVANCED_FACE('',(#241210,#241398),#241532,.T.); +#241210 = FACE_BOUND('',#241211,.F.); +#241211 = EDGE_LOOP('',(#241212,#241223,#241231,#241239,#241247,#241255, + #241263,#241271,#241279,#241287,#241295,#241304,#241312,#241320, + #241328,#241336,#241344,#241352,#241360,#241368,#241376,#241384, + #241392)); +#241212 = ORIENTED_EDGE('',*,*,#241213,.T.); +#241213 = EDGE_CURVE('',#241214,#241216,#241218,.T.); +#241214 = VERTEX_POINT('',#241215); +#241215 = CARTESIAN_POINT('',(89.008957,-49.262418,1.585)); +#241216 = VERTEX_POINT('',#241217); +#241217 = CARTESIAN_POINT('',(89.477028,-49.267786,1.585)); +#241218 = CIRCLE('',#241219,0.397578964435); +#241219 = AXIS2_PLACEMENT_3D('',#241220,#241221,#241222); +#241220 = CARTESIAN_POINT('',(89.239306972123,-49.58646726061,1.585)); +#241221 = DIRECTION('',(0.,0.,-1.)); +#241222 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#241223 = ORIENTED_EDGE('',*,*,#241224,.T.); +#241224 = EDGE_CURVE('',#241216,#241225,#241227,.T.); +#241225 = VERTEX_POINT('',#241226); +#241226 = CARTESIAN_POINT('',(89.587344,-49.379108,1.585)); +#241227 = LINE('',#241228,#241229); +#241228 = CARTESIAN_POINT('',(89.477028,-49.267786,1.585)); +#241229 = VECTOR('',#241230,1.); +#241230 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#241231 = ORIENTED_EDGE('',*,*,#241232,.T.); +#241232 = EDGE_CURVE('',#241225,#241233,#241235,.T.); +#241233 = VERTEX_POINT('',#241234); +#241234 = CARTESIAN_POINT('',(89.597744,-49.402586,1.585)); +#241235 = LINE('',#241236,#241237); +#241236 = CARTESIAN_POINT('',(89.587344,-49.379108,1.585)); +#241237 = VECTOR('',#241238,1.); +#241238 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#241239 = ORIENTED_EDGE('',*,*,#241240,.T.); +#241240 = EDGE_CURVE('',#241233,#241241,#241243,.T.); +#241241 = VERTEX_POINT('',#241242); +#241242 = CARTESIAN_POINT('',(89.647602,-49.611252,1.585)); +#241243 = LINE('',#241244,#241245); +#241244 = CARTESIAN_POINT('',(89.597744,-49.402586,1.585)); +#241245 = VECTOR('',#241246,1.); +#241246 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#241247 = ORIENTED_EDGE('',*,*,#241248,.T.); +#241248 = EDGE_CURVE('',#241241,#241249,#241251,.T.); +#241249 = VERTEX_POINT('',#241250); +#241250 = CARTESIAN_POINT('',(89.645363,-49.962775,1.585)); +#241251 = LINE('',#241252,#241253); +#241252 = CARTESIAN_POINT('',(89.647602,-49.611252,1.585)); +#241253 = VECTOR('',#241254,1.); +#241254 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#241255 = ORIENTED_EDGE('',*,*,#241256,.T.); +#241256 = EDGE_CURVE('',#241249,#241257,#241259,.T.); +#241257 = VERTEX_POINT('',#241258); +#241258 = CARTESIAN_POINT('',(89.592797,-50.167097,1.585)); +#241259 = LINE('',#241260,#241261); +#241260 = CARTESIAN_POINT('',(89.645363,-49.962775,1.585)); +#241261 = VECTOR('',#241262,1.); +#241262 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#241263 = ORIENTED_EDGE('',*,*,#241264,.T.); +#241264 = EDGE_CURVE('',#241257,#241265,#241267,.T.); +#241265 = VERTEX_POINT('',#241266); +#241266 = CARTESIAN_POINT('',(89.578017,-50.188093,1.585)); +#241267 = LINE('',#241268,#241269); +#241268 = CARTESIAN_POINT('',(89.592797,-50.167097,1.585)); +#241269 = VECTOR('',#241270,1.); +#241270 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#241271 = ORIENTED_EDGE('',*,*,#241272,.T.); +#241272 = EDGE_CURVE('',#241265,#241273,#241275,.T.); +#241273 = VERTEX_POINT('',#241274); +#241274 = CARTESIAN_POINT('',(89.53581,-50.230299,1.585)); +#241275 = LINE('',#241276,#241277); +#241276 = CARTESIAN_POINT('',(89.578017,-50.188093,1.585)); +#241277 = VECTOR('',#241278,1.); +#241278 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#241279 = ORIENTED_EDGE('',*,*,#241280,.T.); +#241280 = EDGE_CURVE('',#241273,#241281,#241283,.T.); +#241281 = VERTEX_POINT('',#241282); +#241282 = CARTESIAN_POINT('',(89.56941,-50.263899,1.585)); +#241283 = LINE('',#241284,#241285); +#241284 = CARTESIAN_POINT('',(89.53581,-50.230299,1.585)); +#241285 = VECTOR('',#241286,1.); +#241286 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#241287 = ORIENTED_EDGE('',*,*,#241288,.T.); +#241288 = EDGE_CURVE('',#241281,#241289,#241291,.T.); +#241289 = VERTEX_POINT('',#241290); +#241290 = CARTESIAN_POINT('',(89.666205,-50.313907,1.585)); +#241291 = LINE('',#241292,#241293); +#241292 = CARTESIAN_POINT('',(89.56941,-50.263899,1.585)); +#241293 = VECTOR('',#241294,1.); +#241294 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#241295 = ORIENTED_EDGE('',*,*,#241296,.T.); +#241296 = EDGE_CURVE('',#241289,#241297,#241299,.T.); +#241297 = VERTEX_POINT('',#241298); +#241298 = CARTESIAN_POINT('',(89.58668,-50.440239,1.585)); +#241299 = CIRCLE('',#241300,7.500029440362E-02); +#241300 = AXIS2_PLACEMENT_3D('',#241301,#241302,#241303); +#241301 = CARTESIAN_POINT('',(89.620221053971,-50.37315664867,1.585)); +#241302 = DIRECTION('',(0.,0.,-1.)); +#241303 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#241304 = ORIENTED_EDGE('',*,*,#241305,.T.); +#241305 = EDGE_CURVE('',#241297,#241306,#241308,.T.); +#241306 = VERTEX_POINT('',#241307); +#241307 = CARTESIAN_POINT('',(89.4777,-50.383291,1.585)); +#241308 = LINE('',#241309,#241310); +#241309 = CARTESIAN_POINT('',(89.58668,-50.440239,1.585)); +#241310 = VECTOR('',#241311,1.); +#241311 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#241312 = ORIENTED_EDGE('',*,*,#241313,.T.); +#241313 = EDGE_CURVE('',#241306,#241314,#241316,.T.); +#241314 = VERTEX_POINT('',#241315); +#241315 = CARTESIAN_POINT('',(89.414936,-50.321557,1.585)); +#241316 = LINE('',#241317,#241318); +#241317 = CARTESIAN_POINT('',(89.4777,-50.383291,1.585)); +#241318 = VECTOR('',#241319,1.); +#241319 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#241320 = ORIENTED_EDGE('',*,*,#241321,.T.); +#241321 = EDGE_CURVE('',#241314,#241322,#241324,.T.); +#241322 = VERTEX_POINT('',#241323); +#241323 = CARTESIAN_POINT('',(89.349139,-50.351478,1.585)); +#241324 = LINE('',#241325,#241326); +#241325 = CARTESIAN_POINT('',(89.414936,-50.321557,1.585)); +#241326 = VECTOR('',#241327,1.); +#241327 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#241328 = ORIENTED_EDGE('',*,*,#241329,.T.); +#241329 = EDGE_CURVE('',#241322,#241330,#241332,.T.); +#241330 = VERTEX_POINT('',#241331); +#241331 = CARTESIAN_POINT('',(89.124221,-50.350256,1.585)); +#241332 = LINE('',#241333,#241334); +#241333 = CARTESIAN_POINT('',(89.349139,-50.351478,1.585)); +#241334 = VECTOR('',#241335,1.); +#241335 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#241336 = ORIENTED_EDGE('',*,*,#241337,.T.); +#241337 = EDGE_CURVE('',#241330,#241338,#241340,.T.); +#241338 = VERTEX_POINT('',#241339); +#241339 = CARTESIAN_POINT('',(89.00151,-50.288053,1.585)); +#241340 = LINE('',#241341,#241342); +#241341 = CARTESIAN_POINT('',(89.124221,-50.350256,1.585)); +#241342 = VECTOR('',#241343,1.); +#241343 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#241344 = ORIENTED_EDGE('',*,*,#241345,.T.); +#241345 = EDGE_CURVE('',#241338,#241346,#241348,.T.); +#241346 = VERTEX_POINT('',#241347); +#241347 = CARTESIAN_POINT('',(88.891194,-50.176728,1.585)); +#241348 = LINE('',#241349,#241350); +#241349 = CARTESIAN_POINT('',(89.00151,-50.288053,1.585)); +#241350 = VECTOR('',#241351,1.); +#241351 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#241352 = ORIENTED_EDGE('',*,*,#241353,.T.); +#241353 = EDGE_CURVE('',#241346,#241354,#241356,.T.); +#241354 = VERTEX_POINT('',#241355); +#241355 = CARTESIAN_POINT('',(88.880794,-50.153251,1.585)); +#241356 = LINE('',#241357,#241358); +#241357 = CARTESIAN_POINT('',(88.891194,-50.176728,1.585)); +#241358 = VECTOR('',#241359,1.); +#241359 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#241360 = ORIENTED_EDGE('',*,*,#241361,.T.); +#241361 = EDGE_CURVE('',#241354,#241362,#241364,.T.); +#241362 = VERTEX_POINT('',#241363); +#241363 = CARTESIAN_POINT('',(88.830936,-49.944585,1.585)); +#241364 = LINE('',#241365,#241366); +#241365 = CARTESIAN_POINT('',(88.880794,-50.153251,1.585)); +#241366 = VECTOR('',#241367,1.); +#241367 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#241368 = ORIENTED_EDGE('',*,*,#241369,.T.); +#241369 = EDGE_CURVE('',#241362,#241370,#241372,.T.); +#241370 = VERTEX_POINT('',#241371); +#241371 = CARTESIAN_POINT('',(88.833175,-49.593062,1.585)); +#241372 = LINE('',#241373,#241374); +#241373 = CARTESIAN_POINT('',(88.830936,-49.944585,1.585)); +#241374 = VECTOR('',#241375,1.); +#241375 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#241376 = ORIENTED_EDGE('',*,*,#241377,.T.); +#241377 = EDGE_CURVE('',#241370,#241378,#241380,.T.); +#241378 = VERTEX_POINT('',#241379); +#241379 = CARTESIAN_POINT('',(88.885741,-49.38874,1.585)); +#241380 = LINE('',#241381,#241382); +#241381 = CARTESIAN_POINT('',(88.833175,-49.593062,1.585)); +#241382 = VECTOR('',#241383,1.); +#241383 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#241384 = ORIENTED_EDGE('',*,*,#241385,.T.); +#241385 = EDGE_CURVE('',#241378,#241386,#241388,.T.); +#241386 = VERTEX_POINT('',#241387); +#241387 = CARTESIAN_POINT('',(88.900522,-49.367743,1.585)); +#241388 = LINE('',#241389,#241390); +#241389 = CARTESIAN_POINT('',(88.885741,-49.38874,1.585)); +#241390 = VECTOR('',#241391,1.); +#241391 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#241392 = ORIENTED_EDGE('',*,*,#241393,.T.); +#241393 = EDGE_CURVE('',#241386,#241214,#241394,.T.); +#241394 = LINE('',#241395,#241396); +#241395 = CARTESIAN_POINT('',(88.900522,-49.367743,1.585)); +#241396 = VECTOR('',#241397,1.); +#241397 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#241398 = FACE_BOUND('',#241399,.F.); +#241399 = EDGE_LOOP('',(#241400,#241411,#241419,#241428,#241436,#241444, + #241452,#241460,#241468,#241476,#241485,#241493,#241501,#241509, + #241517,#241526)); +#241400 = ORIENTED_EDGE('',*,*,#241401,.T.); +#241401 = EDGE_CURVE('',#241402,#241404,#241406,.T.); +#241402 = VERTEX_POINT('',#241403); +#241403 = CARTESIAN_POINT('',(89.385318,-49.387177,1.585)); +#241404 = VERTEX_POINT('',#241405); +#241405 = CARTESIAN_POINT('',(89.09322,-49.387177,1.585)); +#241406 = CIRCLE('',#241407,0.252889603602); +#241407 = AXIS2_PLACEMENT_3D('',#241408,#241409,#241410); +#241408 = CARTESIAN_POINT('',(89.239269,-49.59363,1.585)); +#241409 = DIRECTION('',(0.,0.,1.)); +#241410 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#241411 = ORIENTED_EDGE('',*,*,#241412,.T.); +#241412 = EDGE_CURVE('',#241404,#241413,#241415,.T.); +#241413 = VERTEX_POINT('',#241414); +#241414 = CARTESIAN_POINT('',(89.021277,-49.459119,1.585)); +#241415 = LINE('',#241416,#241417); +#241416 = CARTESIAN_POINT('',(89.09322,-49.387177,1.585)); +#241417 = VECTOR('',#241418,1.); +#241418 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#241419 = ORIENTED_EDGE('',*,*,#241420,.T.); +#241420 = EDGE_CURVE('',#241413,#241421,#241423,.T.); +#241421 = VERTEX_POINT('',#241422); +#241422 = CARTESIAN_POINT('',(89.021277,-50.096717,1.585)); +#241423 = CIRCLE('',#241424,0.985308713638); +#241424 = AXIS2_PLACEMENT_3D('',#241425,#241426,#241427); +#241425 = CARTESIAN_POINT('',(89.953586207704,-49.777918,1.585)); +#241426 = DIRECTION('',(0.,0.,1.)); +#241427 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#241428 = ORIENTED_EDGE('',*,*,#241429,.T.); +#241429 = EDGE_CURVE('',#241421,#241430,#241432,.T.); +#241430 = VERTEX_POINT('',#241431); +#241431 = CARTESIAN_POINT('',(89.09322,-50.168661,1.585)); +#241432 = LINE('',#241433,#241434); +#241433 = CARTESIAN_POINT('',(89.021277,-50.096717,1.585)); +#241434 = VECTOR('',#241435,1.); +#241435 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#241436 = ORIENTED_EDGE('',*,*,#241437,.T.); +#241437 = EDGE_CURVE('',#241430,#241438,#241440,.T.); +#241438 = VERTEX_POINT('',#241439); +#241439 = CARTESIAN_POINT('',(89.161736,-50.202919,1.585)); +#241440 = LINE('',#241441,#241442); +#241441 = CARTESIAN_POINT('',(89.09322,-50.168661,1.585)); +#241442 = VECTOR('',#241443,1.); +#241443 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#241444 = ORIENTED_EDGE('',*,*,#241445,.T.); +#241445 = EDGE_CURVE('',#241438,#241446,#241448,.T.); +#241446 = VERTEX_POINT('',#241447); +#241447 = CARTESIAN_POINT('',(89.296299,-50.202919,1.585)); +#241448 = LINE('',#241449,#241450); +#241449 = CARTESIAN_POINT('',(89.161736,-50.202919,1.585)); +#241450 = VECTOR('',#241451,1.); +#241451 = DIRECTION('',(1.,0.,0.)); +#241452 = ORIENTED_EDGE('',*,*,#241453,.T.); +#241453 = EDGE_CURVE('',#241446,#241454,#241456,.T.); +#241454 = VERTEX_POINT('',#241455); +#241455 = CARTESIAN_POINT('',(89.24246,-50.14908,1.585)); +#241456 = LINE('',#241457,#241458); +#241457 = CARTESIAN_POINT('',(89.296299,-50.202919,1.585)); +#241458 = VECTOR('',#241459,1.); +#241459 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241460 = ORIENTED_EDGE('',*,*,#241461,.T.); +#241461 = EDGE_CURVE('',#241454,#241462,#241464,.T.); +#241462 = VERTEX_POINT('',#241463); +#241463 = CARTESIAN_POINT('',(89.173945,-50.114823,1.585)); +#241464 = LINE('',#241465,#241466); +#241465 = CARTESIAN_POINT('',(89.24246,-50.14908,1.585)); +#241466 = VECTOR('',#241467,1.); +#241467 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#241468 = ORIENTED_EDGE('',*,*,#241469,.T.); +#241469 = EDGE_CURVE('',#241462,#241470,#241472,.T.); +#241470 = VERTEX_POINT('',#241471); +#241471 = CARTESIAN_POINT('',(89.08178,-50.113382,1.585)); +#241472 = LINE('',#241473,#241474); +#241473 = CARTESIAN_POINT('',(89.173945,-50.114823,1.585)); +#241474 = VECTOR('',#241475,1.); +#241475 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#241476 = ORIENTED_EDGE('',*,*,#241477,.T.); +#241477 = EDGE_CURVE('',#241470,#241478,#241480,.T.); +#241478 = VERTEX_POINT('',#241479); +#241479 = CARTESIAN_POINT('',(89.096412,-49.964823,1.585)); +#241480 = CIRCLE('',#241481,7.500006711464E-02); +#241481 = AXIS2_PLACEMENT_3D('',#241482,#241483,#241484); +#241482 = CARTESIAN_POINT('',(89.096411932885,-50.03982306711,1.585)); +#241483 = DIRECTION('',(0.,0.,-1.)); +#241484 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#241485 = ORIENTED_EDGE('',*,*,#241486,.T.); +#241486 = EDGE_CURVE('',#241478,#241487,#241489,.T.); +#241487 = VERTEX_POINT('',#241488); +#241488 = CARTESIAN_POINT('',(89.211459,-49.967486,1.585)); +#241489 = LINE('',#241490,#241491); +#241490 = CARTESIAN_POINT('',(89.096412,-49.964823,1.585)); +#241491 = VECTOR('',#241492,1.); +#241492 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#241493 = ORIENTED_EDGE('',*,*,#241494,.T.); +#241494 = EDGE_CURVE('',#241487,#241495,#241497,.T.); +#241495 = VERTEX_POINT('',#241496); +#241496 = CARTESIAN_POINT('',(89.334171,-50.02969,1.585)); +#241497 = LINE('',#241498,#241499); +#241498 = CARTESIAN_POINT('',(89.211459,-49.967486,1.585)); +#241499 = VECTOR('',#241500,1.); +#241500 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#241501 = ORIENTED_EDGE('',*,*,#241502,.T.); +#241502 = EDGE_CURVE('',#241495,#241503,#241505,.T.); +#241503 = VERTEX_POINT('',#241504); +#241504 = CARTESIAN_POINT('',(89.429744,-50.124233,1.585)); +#241505 = LINE('',#241506,#241507); +#241506 = CARTESIAN_POINT('',(89.334171,-50.02969,1.585)); +#241507 = VECTOR('',#241508,1.); +#241508 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#241509 = ORIENTED_EDGE('',*,*,#241510,.T.); +#241510 = EDGE_CURVE('',#241503,#241511,#241513,.T.); +#241511 = VERTEX_POINT('',#241512); +#241512 = CARTESIAN_POINT('',(89.45726,-50.096717,1.585)); +#241513 = LINE('',#241514,#241515); +#241514 = CARTESIAN_POINT('',(89.429744,-50.124233,1.585)); +#241515 = VECTOR('',#241516,1.); +#241516 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#241517 = ORIENTED_EDGE('',*,*,#241518,.T.); +#241518 = EDGE_CURVE('',#241511,#241519,#241521,.T.); +#241519 = VERTEX_POINT('',#241520); +#241520 = CARTESIAN_POINT('',(89.45726,-49.459119,1.585)); +#241521 = CIRCLE('',#241522,0.985282207896); +#241522 = AXIS2_PLACEMENT_3D('',#241523,#241524,#241525); +#241523 = CARTESIAN_POINT('',(88.524978804868,-49.777918,1.585)); +#241524 = DIRECTION('',(0.,-0.,1.)); +#241525 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#241526 = ORIENTED_EDGE('',*,*,#241527,.T.); +#241527 = EDGE_CURVE('',#241519,#241402,#241528,.T.); +#241528 = LINE('',#241529,#241530); +#241529 = CARTESIAN_POINT('',(89.45726,-49.459119,1.585)); +#241530 = VECTOR('',#241531,1.); +#241531 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241532 = PLANE('',#241533); +#241533 = AXIS2_PLACEMENT_3D('',#241534,#241535,#241536); +#241534 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241535 = DIRECTION('',(0.,0.,1.)); +#241536 = DIRECTION('',(1.,0.,-0.)); +#241537 = SHELL_BASED_SURFACE_MODEL('',(#241538)); +#241538 = OPEN_SHELL('',(#241539)); +#241539 = ADVANCED_FACE('',(#241540),#241674,.T.); +#241540 = FACE_BOUND('',#241541,.F.); +#241541 = EDGE_LOOP('',(#241542,#241552,#241560,#241569,#241577,#241585, + #241594,#241602,#241611,#241619,#241627,#241635,#241643,#241652, + #241660,#241668)); +#241542 = ORIENTED_EDGE('',*,*,#241543,.T.); +#241543 = EDGE_CURVE('',#241544,#241546,#241548,.T.); +#241544 = VERTEX_POINT('',#241545); +#241545 = CARTESIAN_POINT('',(90.186181,-49.224941,1.585)); +#241546 = VERTEX_POINT('',#241547); +#241547 = CARTESIAN_POINT('',(90.224637,-49.20436,1.585)); +#241548 = LINE('',#241549,#241550); +#241549 = CARTESIAN_POINT('',(90.186181,-49.224941,1.585)); +#241550 = VECTOR('',#241551,1.); +#241551 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#241552 = ORIENTED_EDGE('',*,*,#241553,.T.); +#241553 = EDGE_CURVE('',#241546,#241554,#241556,.T.); +#241554 = VERTEX_POINT('',#241555); +#241555 = CARTESIAN_POINT('',(90.246474,-49.20436,1.585)); +#241556 = LINE('',#241557,#241558); +#241557 = CARTESIAN_POINT('',(90.224637,-49.20436,1.585)); +#241558 = VECTOR('',#241559,1.); +#241559 = DIRECTION('',(1.,0.,0.)); +#241560 = ORIENTED_EDGE('',*,*,#241561,.T.); +#241561 = EDGE_CURVE('',#241554,#241562,#241564,.T.); +#241562 = VERTEX_POINT('',#241563); +#241563 = CARTESIAN_POINT('',(90.314269,-49.277919,1.585)); +#241564 = CIRCLE('',#241565,7.216898094227E-02); +#241565 = AXIS2_PLACEMENT_3D('',#241566,#241567,#241568); +#241566 = CARTESIAN_POINT('',(90.242116063893,-49.27639728342,1.585)); +#241567 = DIRECTION('',(0.,0.,-1.)); +#241568 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#241569 = ORIENTED_EDGE('',*,*,#241570,.T.); +#241570 = EDGE_CURVE('',#241562,#241571,#241573,.T.); +#241571 = VERTEX_POINT('',#241572); +#241572 = CARTESIAN_POINT('',(90.314269,-50.202919,1.585)); +#241573 = LINE('',#241574,#241575); +#241574 = CARTESIAN_POINT('',(90.314269,-49.277919,1.585)); +#241575 = VECTOR('',#241576,1.); +#241576 = DIRECTION('',(0.,-1.,0.)); +#241577 = ORIENTED_EDGE('',*,*,#241578,.T.); +#241578 = EDGE_CURVE('',#241571,#241579,#241581,.T.); +#241579 = VERTEX_POINT('',#241580); +#241580 = CARTESIAN_POINT('',(90.539615,-50.20436,1.585)); +#241581 = LINE('',#241582,#241583); +#241582 = CARTESIAN_POINT('',(90.314269,-50.202919,1.585)); +#241583 = VECTOR('',#241584,1.); +#241584 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#241585 = ORIENTED_EDGE('',*,*,#241586,.T.); +#241586 = EDGE_CURVE('',#241579,#241587,#241589,.T.); +#241587 = VERTEX_POINT('',#241588); +#241588 = CARTESIAN_POINT('',(90.524983,-50.352919,1.585)); +#241589 = CIRCLE('',#241590,7.500006711464E-02); +#241590 = AXIS2_PLACEMENT_3D('',#241591,#241592,#241593); +#241591 = CARTESIAN_POINT('',(90.524983067115,-50.27791893288,1.585)); +#241592 = DIRECTION('',(0.,0.,-1.)); +#241593 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#241594 = ORIENTED_EDGE('',*,*,#241595,.T.); +#241595 = EDGE_CURVE('',#241587,#241596,#241598,.T.); +#241596 = VERTEX_POINT('',#241597); +#241597 = CARTESIAN_POINT('',(89.938923,-50.351478,1.585)); +#241598 = LINE('',#241599,#241600); +#241599 = CARTESIAN_POINT('',(90.524983,-50.352919,1.585)); +#241600 = VECTOR('',#241601,1.); +#241601 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#241602 = ORIENTED_EDGE('',*,*,#241603,.T.); +#241603 = EDGE_CURVE('',#241596,#241604,#241606,.T.); +#241604 = VERTEX_POINT('',#241605); +#241605 = CARTESIAN_POINT('',(89.953555,-50.202919,1.585)); +#241606 = CIRCLE('',#241607,7.500006711464E-02); +#241607 = AXIS2_PLACEMENT_3D('',#241608,#241609,#241610); +#241608 = CARTESIAN_POINT('',(89.953554932885,-50.27791906711,1.585)); +#241609 = DIRECTION('',(0.,0.,-1.)); +#241610 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#241611 = ORIENTED_EDGE('',*,*,#241612,.T.); +#241612 = EDGE_CURVE('',#241604,#241613,#241615,.T.); +#241613 = VERTEX_POINT('',#241614); +#241614 = CARTESIAN_POINT('',(90.164269,-50.202919,1.585)); +#241615 = LINE('',#241616,#241617); +#241616 = CARTESIAN_POINT('',(89.953555,-50.202919,1.585)); +#241617 = VECTOR('',#241618,1.); +#241618 = DIRECTION('',(1.,0.,0.)); +#241619 = ORIENTED_EDGE('',*,*,#241620,.T.); +#241620 = EDGE_CURVE('',#241613,#241621,#241623,.T.); +#241621 = VERTEX_POINT('',#241622); +#241622 = CARTESIAN_POINT('',(90.164269,-49.506604,1.585)); +#241623 = LINE('',#241624,#241625); +#241624 = CARTESIAN_POINT('',(90.164269,-50.202919,1.585)); +#241625 = VECTOR('',#241626,1.); +#241626 = DIRECTION('',(0.,1.,0.)); +#241627 = ORIENTED_EDGE('',*,*,#241628,.T.); +#241628 = EDGE_CURVE('',#241621,#241629,#241631,.T.); +#241629 = VERTEX_POINT('',#241630); +#241630 = CARTESIAN_POINT('',(90.088633,-49.579131,1.585)); +#241631 = LINE('',#241632,#241633); +#241632 = CARTESIAN_POINT('',(90.164269,-49.506604,1.585)); +#241633 = VECTOR('',#241634,1.); +#241634 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#241635 = ORIENTED_EDGE('',*,*,#241636,.T.); +#241636 = EDGE_CURVE('',#241629,#241637,#241639,.T.); +#241637 = VERTEX_POINT('',#241638); +#241638 = CARTESIAN_POINT('',(89.973364,-49.63597,1.585)); +#241639 = LINE('',#241640,#241641); +#241640 = CARTESIAN_POINT('',(90.088633,-49.579131,1.585)); +#241641 = VECTOR('',#241642,1.); +#241642 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#241643 = ORIENTED_EDGE('',*,*,#241644,.T.); +#241644 = EDGE_CURVE('',#241637,#241645,#241647,.T.); +#241645 = VERTEX_POINT('',#241646); +#241646 = CARTESIAN_POINT('',(89.920014,-49.496551,1.585)); +#241647 = CIRCLE('',#241648,7.500005272362E-02); +#241648 = AXIS2_PLACEMENT_3D('',#241649,#241650,#241651); +#241649 = CARTESIAN_POINT('',(89.95355455676,-49.56363332972,1.585)); +#241650 = DIRECTION('',(0.,0.,-1.)); +#241651 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#241652 = ORIENTED_EDGE('',*,*,#241653,.T.); +#241653 = EDGE_CURVE('',#241645,#241654,#241656,.T.); +#241654 = VERTEX_POINT('',#241655); +#241655 = CARTESIAN_POINT('',(90.004366,-49.454375,1.585)); +#241656 = LINE('',#241657,#241658); +#241657 = CARTESIAN_POINT('',(89.920014,-49.496551,1.585)); +#241658 = VECTOR('',#241659,1.); +#241659 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#241660 = ORIENTED_EDGE('',*,*,#241661,.T.); +#241661 = EDGE_CURVE('',#241654,#241662,#241664,.T.); +#241662 = VERTEX_POINT('',#241663); +#241663 = CARTESIAN_POINT('',(90.085745,-49.372996,1.585)); +#241664 = LINE('',#241665,#241666); +#241665 = CARTESIAN_POINT('',(90.004366,-49.454375,1.585)); +#241666 = VECTOR('',#241667,1.); +#241667 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#241668 = ORIENTED_EDGE('',*,*,#241669,.T.); +#241669 = EDGE_CURVE('',#241662,#241544,#241670,.T.); +#241670 = LINE('',#241671,#241672); +#241671 = CARTESIAN_POINT('',(90.085745,-49.372996,1.585)); +#241672 = VECTOR('',#241673,1.); +#241673 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#241674 = PLANE('',#241675); +#241675 = AXIS2_PLACEMENT_3D('',#241676,#241677,#241678); +#241676 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241677 = DIRECTION('',(0.,0.,1.)); +#241678 = DIRECTION('',(1.,0.,-0.)); +#241679 = SHELL_BASED_SURFACE_MODEL('',(#241680)); +#241680 = OPEN_SHELL('',(#241681)); +#241681 = ADVANCED_FACE('',(#241682,#241784),#241886,.T.); +#241682 = FACE_BOUND('',#241683,.F.); +#241683 = EDGE_LOOP('',(#241684,#241695,#241703,#241711,#241720,#241728, + #241736,#241745,#241753,#241761,#241770,#241778)); +#241684 = ORIENTED_EDGE('',*,*,#241685,.T.); +#241685 = EDGE_CURVE('',#241686,#241688,#241690,.T.); +#241686 = VERTEX_POINT('',#241687); +#241687 = CARTESIAN_POINT('',(91.008952,-49.26242,1.585)); +#241688 = VERTEX_POINT('',#241689); +#241689 = CARTESIAN_POINT('',(91.38179,-49.267786,1.585)); +#241690 = CIRCLE('',#241691,0.291788488016); +#241691 = AXIS2_PLACEMENT_3D('',#241692,#241693,#241694); +#241692 = CARTESIAN_POINT('',(91.19214086911,-49.48953750256,1.585)); +#241693 = DIRECTION('',(0.,0.,-1.)); +#241694 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#241695 = ORIENTED_EDGE('',*,*,#241696,.T.); +#241696 = EDGE_CURVE('',#241688,#241697,#241699,.T.); +#241697 = VERTEX_POINT('',#241698); +#241698 = CARTESIAN_POINT('',(91.445243,-49.333316,1.585)); +#241699 = LINE('',#241700,#241701); +#241700 = CARTESIAN_POINT('',(91.38179,-49.267786,1.585)); +#241701 = VECTOR('',#241702,1.); +#241702 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#241703 = ORIENTED_EDGE('',*,*,#241704,.T.); +#241704 = EDGE_CURVE('',#241697,#241705,#241707,.T.); +#241705 = VERTEX_POINT('',#241706); +#241706 = CARTESIAN_POINT('',(91.502506,-49.450205,1.585)); +#241707 = LINE('',#241708,#241709); +#241708 = CARTESIAN_POINT('',(91.445243,-49.333316,1.585)); +#241709 = VECTOR('',#241710,1.); +#241710 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#241711 = ORIENTED_EDGE('',*,*,#241712,.T.); +#241712 = EDGE_CURVE('',#241705,#241713,#241715,.T.); +#241713 = VERTEX_POINT('',#241714); +#241714 = CARTESIAN_POINT('',(91.496827,-50.120983,1.585)); +#241715 = CIRCLE('',#241716,0.967158496826); +#241716 = AXIS2_PLACEMENT_3D('',#241717,#241718,#241719); +#241717 = CARTESIAN_POINT('',(90.592559706867,-49.77791417228,1.585)); +#241718 = DIRECTION('',(0.,0.,-1.)); +#241719 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#241720 = ORIENTED_EDGE('',*,*,#241721,.T.); +#241721 = EDGE_CURVE('',#241713,#241722,#241724,.T.); +#241722 = VERTEX_POINT('',#241723); +#241723 = CARTESIAN_POINT('',(91.439877,-50.229963,1.585)); +#241724 = LINE('',#241725,#241726); +#241725 = CARTESIAN_POINT('',(91.496827,-50.120983,1.585)); +#241726 = VECTOR('',#241727,1.); +#241727 = DIRECTION('',(-0.463146784148,-0.886281589752,0.)); +#241728 = ORIENTED_EDGE('',*,*,#241729,.T.); +#241729 = EDGE_CURVE('',#241722,#241730,#241732,.T.); +#241730 = VERTEX_POINT('',#241731); +#241731 = CARTESIAN_POINT('',(91.374347,-50.293417,1.585)); +#241732 = LINE('',#241733,#241734); +#241733 = CARTESIAN_POINT('',(91.439877,-50.229963,1.585)); +#241734 = VECTOR('',#241735,1.); +#241735 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#241736 = ORIENTED_EDGE('',*,*,#241737,.T.); +#241737 = EDGE_CURVE('',#241730,#241738,#241740,.T.); +#241738 = VERTEX_POINT('',#241739); +#241739 = CARTESIAN_POINT('',(91.001508,-50.28805,1.585)); +#241740 = CIRCLE('',#241741,0.290998264264); +#241741 = AXIS2_PLACEMENT_3D('',#241742,#241743,#241744); +#241742 = CARTESIAN_POINT('',(91.191143418158,-50.06732755441,1.585)); +#241743 = DIRECTION('',(-0.,0.,-1.)); +#241744 = DIRECTION('',(0.629569328552,-0.77694430981,-0.)); +#241745 = ORIENTED_EDGE('',*,*,#241746,.T.); +#241746 = EDGE_CURVE('',#241738,#241747,#241749,.T.); +#241747 = VERTEX_POINT('',#241748); +#241748 = CARTESIAN_POINT('',(90.938055,-50.222517,1.585)); +#241749 = LINE('',#241750,#241751); +#241750 = CARTESIAN_POINT('',(91.001508,-50.28805,1.585)); +#241751 = VECTOR('',#241752,1.); +#241752 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#241753 = ORIENTED_EDGE('',*,*,#241754,.T.); +#241754 = EDGE_CURVE('',#241747,#241755,#241757,.T.); +#241755 = VERTEX_POINT('',#241756); +#241756 = CARTESIAN_POINT('',(90.880794,-50.105632,1.585)); +#241757 = LINE('',#241758,#241759); +#241758 = CARTESIAN_POINT('',(90.938055,-50.222517,1.585)); +#241759 = VECTOR('',#241760,1.); +#241760 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#241761 = ORIENTED_EDGE('',*,*,#241762,.T.); +#241762 = EDGE_CURVE('',#241755,#241763,#241765,.T.); +#241763 = VERTEX_POINT('',#241764); +#241764 = CARTESIAN_POINT('',(90.886473,-49.434854,1.585)); +#241765 = CIRCLE('',#241766,0.967158496826); +#241766 = AXIS2_PLACEMENT_3D('',#241767,#241768,#241769); +#241767 = CARTESIAN_POINT('',(91.790740293133,-49.77792282772,1.585)); +#241768 = DIRECTION('',(0.,0.,-1.)); +#241769 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#241770 = ORIENTED_EDGE('',*,*,#241771,.T.); +#241771 = EDGE_CURVE('',#241763,#241772,#241774,.T.); +#241772 = VERTEX_POINT('',#241773); +#241773 = CARTESIAN_POINT('',(90.943422,-49.325873,1.585)); +#241774 = LINE('',#241775,#241776); +#241775 = CARTESIAN_POINT('',(90.886473,-49.434854,1.585)); +#241776 = VECTOR('',#241777,1.); +#241777 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#241778 = ORIENTED_EDGE('',*,*,#241779,.T.); +#241779 = EDGE_CURVE('',#241772,#241686,#241780,.T.); +#241780 = LINE('',#241781,#241782); +#241781 = CARTESIAN_POINT('',(90.943422,-49.325873,1.585)); +#241782 = VECTOR('',#241783,1.); +#241783 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#241784 = FACE_BOUND('',#241785,.F.); +#241785 = EDGE_LOOP('',(#241786,#241797,#241805,#241813,#241822,#241830, + #241838,#241847,#241855,#241863,#241872,#241880)); +#241786 = ORIENTED_EDGE('',*,*,#241787,.T.); +#241787 = EDGE_CURVE('',#241788,#241790,#241792,.T.); +#241788 = VERTEX_POINT('',#241789); +#241789 = CARTESIAN_POINT('',(91.29008,-49.387177,1.585)); +#241790 = VERTEX_POINT('',#241791); +#241791 = CARTESIAN_POINT('',(91.09322,-49.387177,1.585)); +#241792 = CIRCLE('',#241793,0.148516804184); +#241793 = AXIS2_PLACEMENT_3D('',#241794,#241795,#241796); +#241794 = CARTESIAN_POINT('',(91.19165,-49.498392,1.585)); +#241795 = DIRECTION('',(0.,0.,1.)); +#241796 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#241797 = ORIENTED_EDGE('',*,*,#241798,.T.); +#241798 = EDGE_CURVE('',#241790,#241799,#241801,.T.); +#241799 = VERTEX_POINT('',#241800); +#241800 = CARTESIAN_POINT('',(91.062813,-49.417584,1.585)); +#241801 = LINE('',#241802,#241803); +#241802 = CARTESIAN_POINT('',(91.09322,-49.387177,1.585)); +#241803 = VECTOR('',#241804,1.); +#241804 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#241805 = ORIENTED_EDGE('',*,*,#241806,.T.); +#241806 = EDGE_CURVE('',#241799,#241807,#241809,.T.); +#241807 = VERTEX_POINT('',#241808); +#241808 = CARTESIAN_POINT('',(91.024319,-49.494571,1.585)); +#241809 = LINE('',#241810,#241811); +#241810 = CARTESIAN_POINT('',(91.062813,-49.417584,1.585)); +#241811 = VECTOR('',#241812,1.); +#241812 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#241813 = ORIENTED_EDGE('',*,*,#241814,.T.); +#241814 = EDGE_CURVE('',#241807,#241815,#241817,.T.); +#241815 = VERTEX_POINT('',#241816); +#241816 = CARTESIAN_POINT('',(91.024319,-50.061266,1.585)); +#241817 = CIRCLE('',#241818,0.815450468383); +#241818 = AXIS2_PLACEMENT_3D('',#241819,#241820,#241821); +#241819 = CARTESIAN_POINT('',(91.788958562559,-49.7779185,1.585)); +#241820 = DIRECTION('',(0.,0.,1.)); +#241821 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#241822 = ORIENTED_EDGE('',*,*,#241823,.T.); +#241823 = EDGE_CURVE('',#241815,#241824,#241826,.T.); +#241824 = VERTEX_POINT('',#241825); +#241825 = CARTESIAN_POINT('',(91.062813,-50.138253,1.585)); +#241826 = LINE('',#241827,#241828); +#241827 = CARTESIAN_POINT('',(91.024319,-50.061266,1.585)); +#241828 = VECTOR('',#241829,1.); +#241829 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#241830 = ORIENTED_EDGE('',*,*,#241831,.T.); +#241831 = EDGE_CURVE('',#241824,#241832,#241834,.T.); +#241832 = VERTEX_POINT('',#241833); +#241833 = CARTESIAN_POINT('',(91.09322,-50.168661,1.585)); +#241834 = LINE('',#241835,#241836); +#241835 = CARTESIAN_POINT('',(91.062813,-50.138253,1.585)); +#241836 = VECTOR('',#241837,1.); +#241837 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#241838 = ORIENTED_EDGE('',*,*,#241839,.T.); +#241839 = EDGE_CURVE('',#241832,#241840,#241842,.T.); +#241840 = VERTEX_POINT('',#241841); +#241841 = CARTESIAN_POINT('',(91.290079,-50.168661,1.585)); +#241842 = CIRCLE('',#241843,0.14851572397); +#241843 = AXIS2_PLACEMENT_3D('',#241844,#241845,#241846); +#241844 = CARTESIAN_POINT('',(91.1916495,-50.057447,1.585)); +#241845 = DIRECTION('',(0.,0.,1.)); +#241846 = DIRECTION('',(-0.662754739828,-0.748836534121,0.)); +#241847 = ORIENTED_EDGE('',*,*,#241848,.T.); +#241848 = EDGE_CURVE('',#241840,#241849,#241851,.T.); +#241849 = VERTEX_POINT('',#241850); +#241850 = CARTESIAN_POINT('',(91.320486,-50.138253,1.585)); +#241851 = LINE('',#241852,#241853); +#241852 = CARTESIAN_POINT('',(91.290079,-50.168661,1.585)); +#241853 = VECTOR('',#241854,1.); +#241854 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#241855 = ORIENTED_EDGE('',*,*,#241856,.T.); +#241856 = EDGE_CURVE('',#241849,#241857,#241859,.T.); +#241857 = VERTEX_POINT('',#241858); +#241858 = CARTESIAN_POINT('',(91.35898,-50.061266,1.585)); +#241859 = LINE('',#241860,#241861); +#241860 = CARTESIAN_POINT('',(91.320486,-50.138253,1.585)); +#241861 = VECTOR('',#241862,1.); +#241862 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#241863 = ORIENTED_EDGE('',*,*,#241864,.T.); +#241864 = EDGE_CURVE('',#241857,#241865,#241867,.T.); +#241865 = VERTEX_POINT('',#241866); +#241866 = CARTESIAN_POINT('',(91.35898,-49.494571,1.585)); +#241867 = CIRCLE('',#241868,0.815433004022); +#241868 = AXIS2_PLACEMENT_3D('',#241869,#241870,#241871); +#241869 = CARTESIAN_POINT('',(90.59435906235,-49.7779185,1.585)); +#241870 = DIRECTION('',(0.,-0.,1.)); +#241871 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#241872 = ORIENTED_EDGE('',*,*,#241873,.T.); +#241873 = EDGE_CURVE('',#241865,#241874,#241876,.T.); +#241874 = VERTEX_POINT('',#241875); +#241875 = CARTESIAN_POINT('',(91.320487,-49.417584,1.585)); +#241876 = LINE('',#241877,#241878); +#241877 = CARTESIAN_POINT('',(91.35898,-49.494571,1.585)); +#241878 = VECTOR('',#241879,1.); +#241879 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#241880 = ORIENTED_EDGE('',*,*,#241881,.T.); +#241881 = EDGE_CURVE('',#241874,#241788,#241882,.T.); +#241882 = LINE('',#241883,#241884); +#241883 = CARTESIAN_POINT('',(91.320487,-49.417584,1.585)); +#241884 = VECTOR('',#241885,1.); +#241885 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241886 = PLANE('',#241887); +#241887 = AXIS2_PLACEMENT_3D('',#241888,#241889,#241890); +#241888 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241889 = DIRECTION('',(0.,0.,1.)); +#241890 = DIRECTION('',(1.,0.,-0.)); +#241891 = SHELL_BASED_SURFACE_MODEL('',(#241892)); +#241892 = OPEN_SHELL('',(#241893)); +#241893 = ADVANCED_FACE('',(#241894),#242028,.T.); +#241894 = FACE_BOUND('',#241895,.F.); +#241895 = EDGE_LOOP('',(#241896,#241906,#241914,#241923,#241931,#241939, + #241948,#241956,#241965,#241973,#241981,#241989,#241997,#242006, + #242014,#242022)); +#241896 = ORIENTED_EDGE('',*,*,#241897,.T.); +#241897 = EDGE_CURVE('',#241898,#241900,#241902,.T.); +#241898 = VERTEX_POINT('',#241899); +#241899 = CARTESIAN_POINT('',(162.162371,-49.194941,1.585)); +#241900 = VERTEX_POINT('',#241901); +#241901 = CARTESIAN_POINT('',(162.200827,-49.17436,1.585)); +#241902 = LINE('',#241903,#241904); +#241903 = CARTESIAN_POINT('',(162.162371,-49.194941,1.585)); +#241904 = VECTOR('',#241905,1.); +#241905 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#241906 = ORIENTED_EDGE('',*,*,#241907,.T.); +#241907 = EDGE_CURVE('',#241900,#241908,#241910,.T.); +#241908 = VERTEX_POINT('',#241909); +#241909 = CARTESIAN_POINT('',(162.222664,-49.17436,1.585)); +#241910 = LINE('',#241911,#241912); +#241911 = CARTESIAN_POINT('',(162.200827,-49.17436,1.585)); +#241912 = VECTOR('',#241913,1.); +#241913 = DIRECTION('',(1.,0.,0.)); +#241914 = ORIENTED_EDGE('',*,*,#241915,.T.); +#241915 = EDGE_CURVE('',#241908,#241916,#241918,.T.); +#241916 = VERTEX_POINT('',#241917); +#241917 = CARTESIAN_POINT('',(162.290459,-49.247919,1.585)); +#241918 = CIRCLE('',#241919,7.21689809423E-02); +#241919 = AXIS2_PLACEMENT_3D('',#241920,#241921,#241922); +#241920 = CARTESIAN_POINT('',(162.21830606389,-49.24639728342,1.585)); +#241921 = DIRECTION('',(0.,0.,-1.)); +#241922 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#241923 = ORIENTED_EDGE('',*,*,#241924,.T.); +#241924 = EDGE_CURVE('',#241916,#241925,#241927,.T.); +#241925 = VERTEX_POINT('',#241926); +#241926 = CARTESIAN_POINT('',(162.290459,-50.172919,1.585)); +#241927 = LINE('',#241928,#241929); +#241928 = CARTESIAN_POINT('',(162.290459,-49.247919,1.585)); +#241929 = VECTOR('',#241930,1.); +#241930 = DIRECTION('',(0.,-1.,0.)); +#241931 = ORIENTED_EDGE('',*,*,#241932,.T.); +#241932 = EDGE_CURVE('',#241925,#241933,#241935,.T.); +#241933 = VERTEX_POINT('',#241934); +#241934 = CARTESIAN_POINT('',(162.515805,-50.17436,1.585)); +#241935 = LINE('',#241936,#241937); +#241936 = CARTESIAN_POINT('',(162.290459,-50.172919,1.585)); +#241937 = VECTOR('',#241938,1.); +#241938 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#241939 = ORIENTED_EDGE('',*,*,#241940,.T.); +#241940 = EDGE_CURVE('',#241933,#241941,#241943,.T.); +#241941 = VERTEX_POINT('',#241942); +#241942 = CARTESIAN_POINT('',(162.501173,-50.322919,1.585)); +#241943 = CIRCLE('',#241944,7.500006711464E-02); +#241944 = AXIS2_PLACEMENT_3D('',#241945,#241946,#241947); +#241945 = CARTESIAN_POINT('',(162.50117306711,-50.24791893288,1.585)); +#241946 = DIRECTION('',(0.,0.,-1.)); +#241947 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#241948 = ORIENTED_EDGE('',*,*,#241949,.T.); +#241949 = EDGE_CURVE('',#241941,#241950,#241952,.T.); +#241950 = VERTEX_POINT('',#241951); +#241951 = CARTESIAN_POINT('',(161.915113,-50.321478,1.585)); +#241952 = LINE('',#241953,#241954); +#241953 = CARTESIAN_POINT('',(162.501173,-50.322919,1.585)); +#241954 = VECTOR('',#241955,1.); +#241955 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#241956 = ORIENTED_EDGE('',*,*,#241957,.T.); +#241957 = EDGE_CURVE('',#241950,#241958,#241960,.T.); +#241958 = VERTEX_POINT('',#241959); +#241959 = CARTESIAN_POINT('',(161.929745,-50.172919,1.585)); +#241960 = CIRCLE('',#241961,7.500006711464E-02); +#241961 = AXIS2_PLACEMENT_3D('',#241962,#241963,#241964); +#241962 = CARTESIAN_POINT('',(161.92974493288,-50.24791906711,1.585)); +#241963 = DIRECTION('',(0.,0.,-1.)); +#241964 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#241965 = ORIENTED_EDGE('',*,*,#241966,.T.); +#241966 = EDGE_CURVE('',#241958,#241967,#241969,.T.); +#241967 = VERTEX_POINT('',#241968); +#241968 = CARTESIAN_POINT('',(162.140459,-50.172919,1.585)); +#241969 = LINE('',#241970,#241971); +#241970 = CARTESIAN_POINT('',(161.929745,-50.172919,1.585)); +#241971 = VECTOR('',#241972,1.); +#241972 = DIRECTION('',(1.,0.,0.)); +#241973 = ORIENTED_EDGE('',*,*,#241974,.T.); +#241974 = EDGE_CURVE('',#241967,#241975,#241977,.T.); +#241975 = VERTEX_POINT('',#241976); +#241976 = CARTESIAN_POINT('',(162.140459,-49.476604,1.585)); +#241977 = LINE('',#241978,#241979); +#241978 = CARTESIAN_POINT('',(162.140459,-50.172919,1.585)); +#241979 = VECTOR('',#241980,1.); +#241980 = DIRECTION('',(0.,1.,0.)); +#241981 = ORIENTED_EDGE('',*,*,#241982,.T.); +#241982 = EDGE_CURVE('',#241975,#241983,#241985,.T.); +#241983 = VERTEX_POINT('',#241984); +#241984 = CARTESIAN_POINT('',(162.064823,-49.549131,1.585)); +#241985 = LINE('',#241986,#241987); +#241986 = CARTESIAN_POINT('',(162.140459,-49.476604,1.585)); +#241987 = VECTOR('',#241988,1.); +#241988 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#241989 = ORIENTED_EDGE('',*,*,#241990,.T.); +#241990 = EDGE_CURVE('',#241983,#241991,#241993,.T.); +#241991 = VERTEX_POINT('',#241992); +#241992 = CARTESIAN_POINT('',(161.949554,-49.60597,1.585)); +#241993 = LINE('',#241994,#241995); +#241994 = CARTESIAN_POINT('',(162.064823,-49.549131,1.585)); +#241995 = VECTOR('',#241996,1.); +#241996 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#241997 = ORIENTED_EDGE('',*,*,#241998,.T.); +#241998 = EDGE_CURVE('',#241991,#241999,#242001,.T.); +#241999 = VERTEX_POINT('',#242000); +#242000 = CARTESIAN_POINT('',(161.896204,-49.466551,1.585)); +#242001 = CIRCLE('',#242002,7.500005272362E-02); +#242002 = AXIS2_PLACEMENT_3D('',#242003,#242004,#242005); +#242003 = CARTESIAN_POINT('',(161.92974455676,-49.53363332972,1.585)); +#242004 = DIRECTION('',(0.,0.,-1.)); +#242005 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#242006 = ORIENTED_EDGE('',*,*,#242007,.T.); +#242007 = EDGE_CURVE('',#241999,#242008,#242010,.T.); +#242008 = VERTEX_POINT('',#242009); +#242009 = CARTESIAN_POINT('',(161.980556,-49.424375,1.585)); +#242010 = LINE('',#242011,#242012); +#242011 = CARTESIAN_POINT('',(161.896204,-49.466551,1.585)); +#242012 = VECTOR('',#242013,1.); +#242013 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#242014 = ORIENTED_EDGE('',*,*,#242015,.T.); +#242015 = EDGE_CURVE('',#242008,#242016,#242018,.T.); +#242016 = VERTEX_POINT('',#242017); +#242017 = CARTESIAN_POINT('',(162.061935,-49.342996,1.585)); +#242018 = LINE('',#242019,#242020); +#242019 = CARTESIAN_POINT('',(161.980556,-49.424375,1.585)); +#242020 = VECTOR('',#242021,1.); +#242021 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242022 = ORIENTED_EDGE('',*,*,#242023,.T.); +#242023 = EDGE_CURVE('',#242016,#241898,#242024,.T.); +#242024 = LINE('',#242025,#242026); +#242025 = CARTESIAN_POINT('',(162.061935,-49.342996,1.585)); +#242026 = VECTOR('',#242027,1.); +#242027 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#242028 = PLANE('',#242029); +#242029 = AXIS2_PLACEMENT_3D('',#242030,#242031,#242032); +#242030 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242031 = DIRECTION('',(0.,0.,1.)); +#242032 = DIRECTION('',(1.,0.,-0.)); +#242033 = SHELL_BASED_SURFACE_MODEL('',(#242034)); +#242034 = OPEN_SHELL('',(#242035)); +#242035 = ADVANCED_FACE('',(#242036),#242170,.T.); +#242036 = FACE_BOUND('',#242037,.F.); +#242037 = EDGE_LOOP('',(#242038,#242048,#242056,#242065,#242073,#242081, + #242090,#242098,#242107,#242115,#242123,#242131,#242139,#242148, + #242156,#242164)); +#242038 = ORIENTED_EDGE('',*,*,#242039,.T.); +#242039 = EDGE_CURVE('',#242040,#242042,#242044,.T.); +#242040 = VERTEX_POINT('',#242041); +#242041 = CARTESIAN_POINT('',(163.114752,-49.194941,1.585)); +#242042 = VERTEX_POINT('',#242043); +#242043 = CARTESIAN_POINT('',(163.153208,-49.17436,1.585)); +#242044 = LINE('',#242045,#242046); +#242045 = CARTESIAN_POINT('',(163.114752,-49.194941,1.585)); +#242046 = VECTOR('',#242047,1.); +#242047 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#242048 = ORIENTED_EDGE('',*,*,#242049,.T.); +#242049 = EDGE_CURVE('',#242042,#242050,#242052,.T.); +#242050 = VERTEX_POINT('',#242051); +#242051 = CARTESIAN_POINT('',(163.175045,-49.17436,1.585)); +#242052 = LINE('',#242053,#242054); +#242053 = CARTESIAN_POINT('',(163.153208,-49.17436,1.585)); +#242054 = VECTOR('',#242055,1.); +#242055 = DIRECTION('',(1.,0.,0.)); +#242056 = ORIENTED_EDGE('',*,*,#242057,.T.); +#242057 = EDGE_CURVE('',#242050,#242058,#242060,.T.); +#242058 = VERTEX_POINT('',#242059); +#242059 = CARTESIAN_POINT('',(163.24284,-49.247919,1.585)); +#242060 = CIRCLE('',#242061,7.21689809423E-02); +#242061 = AXIS2_PLACEMENT_3D('',#242062,#242063,#242064); +#242062 = CARTESIAN_POINT('',(163.17068706389,-49.24639728342,1.585)); +#242063 = DIRECTION('',(0.,0.,-1.)); +#242064 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#242065 = ORIENTED_EDGE('',*,*,#242066,.T.); +#242066 = EDGE_CURVE('',#242058,#242067,#242069,.T.); +#242067 = VERTEX_POINT('',#242068); +#242068 = CARTESIAN_POINT('',(163.24284,-50.172919,1.585)); +#242069 = LINE('',#242070,#242071); +#242070 = CARTESIAN_POINT('',(163.24284,-49.247919,1.585)); +#242071 = VECTOR('',#242072,1.); +#242072 = DIRECTION('',(0.,-1.,0.)); +#242073 = ORIENTED_EDGE('',*,*,#242074,.T.); +#242074 = EDGE_CURVE('',#242067,#242075,#242077,.T.); +#242075 = VERTEX_POINT('',#242076); +#242076 = CARTESIAN_POINT('',(163.468186,-50.17436,1.585)); +#242077 = LINE('',#242078,#242079); +#242078 = CARTESIAN_POINT('',(163.24284,-50.172919,1.585)); +#242079 = VECTOR('',#242080,1.); +#242080 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#242081 = ORIENTED_EDGE('',*,*,#242082,.T.); +#242082 = EDGE_CURVE('',#242075,#242083,#242085,.T.); +#242083 = VERTEX_POINT('',#242084); +#242084 = CARTESIAN_POINT('',(163.453554,-50.322919,1.585)); +#242085 = CIRCLE('',#242086,7.500006711464E-02); +#242086 = AXIS2_PLACEMENT_3D('',#242087,#242088,#242089); +#242087 = CARTESIAN_POINT('',(163.45355406711,-50.24791893288,1.585)); +#242088 = DIRECTION('',(0.,0.,-1.)); +#242089 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#242090 = ORIENTED_EDGE('',*,*,#242091,.T.); +#242091 = EDGE_CURVE('',#242083,#242092,#242094,.T.); +#242092 = VERTEX_POINT('',#242093); +#242093 = CARTESIAN_POINT('',(162.867494,-50.321478,1.585)); +#242094 = LINE('',#242095,#242096); +#242095 = CARTESIAN_POINT('',(163.453554,-50.322919,1.585)); +#242096 = VECTOR('',#242097,1.); +#242097 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#242098 = ORIENTED_EDGE('',*,*,#242099,.T.); +#242099 = EDGE_CURVE('',#242092,#242100,#242102,.T.); +#242100 = VERTEX_POINT('',#242101); +#242101 = CARTESIAN_POINT('',(162.882126,-50.172919,1.585)); +#242102 = CIRCLE('',#242103,7.500006711464E-02); +#242103 = AXIS2_PLACEMENT_3D('',#242104,#242105,#242106); +#242104 = CARTESIAN_POINT('',(162.88212593288,-50.24791906711,1.585)); +#242105 = DIRECTION('',(0.,0.,-1.)); +#242106 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#242107 = ORIENTED_EDGE('',*,*,#242108,.T.); +#242108 = EDGE_CURVE('',#242100,#242109,#242111,.T.); +#242109 = VERTEX_POINT('',#242110); +#242110 = CARTESIAN_POINT('',(163.09284,-50.172919,1.585)); +#242111 = LINE('',#242112,#242113); +#242112 = CARTESIAN_POINT('',(162.882126,-50.172919,1.585)); +#242113 = VECTOR('',#242114,1.); +#242114 = DIRECTION('',(1.,0.,0.)); +#242115 = ORIENTED_EDGE('',*,*,#242116,.T.); +#242116 = EDGE_CURVE('',#242109,#242117,#242119,.T.); +#242117 = VERTEX_POINT('',#242118); +#242118 = CARTESIAN_POINT('',(163.09284,-49.476604,1.585)); +#242119 = LINE('',#242120,#242121); +#242120 = CARTESIAN_POINT('',(163.09284,-50.172919,1.585)); +#242121 = VECTOR('',#242122,1.); +#242122 = DIRECTION('',(0.,1.,0.)); +#242123 = ORIENTED_EDGE('',*,*,#242124,.T.); +#242124 = EDGE_CURVE('',#242117,#242125,#242127,.T.); +#242125 = VERTEX_POINT('',#242126); +#242126 = CARTESIAN_POINT('',(163.017204,-49.549131,1.585)); +#242127 = LINE('',#242128,#242129); +#242128 = CARTESIAN_POINT('',(163.09284,-49.476604,1.585)); +#242129 = VECTOR('',#242130,1.); +#242130 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#242131 = ORIENTED_EDGE('',*,*,#242132,.T.); +#242132 = EDGE_CURVE('',#242125,#242133,#242135,.T.); +#242133 = VERTEX_POINT('',#242134); +#242134 = CARTESIAN_POINT('',(162.901935,-49.60597,1.585)); +#242135 = LINE('',#242136,#242137); +#242136 = CARTESIAN_POINT('',(163.017204,-49.549131,1.585)); +#242137 = VECTOR('',#242138,1.); +#242138 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#242139 = ORIENTED_EDGE('',*,*,#242140,.T.); +#242140 = EDGE_CURVE('',#242133,#242141,#242143,.T.); +#242141 = VERTEX_POINT('',#242142); +#242142 = CARTESIAN_POINT('',(162.848585,-49.466551,1.585)); +#242143 = CIRCLE('',#242144,7.500005272362E-02); +#242144 = AXIS2_PLACEMENT_3D('',#242145,#242146,#242147); +#242145 = CARTESIAN_POINT('',(162.88212555676,-49.53363332972,1.585)); +#242146 = DIRECTION('',(0.,0.,-1.)); +#242147 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#242148 = ORIENTED_EDGE('',*,*,#242149,.T.); +#242149 = EDGE_CURVE('',#242141,#242150,#242152,.T.); +#242150 = VERTEX_POINT('',#242151); +#242151 = CARTESIAN_POINT('',(162.932937,-49.424375,1.585)); +#242152 = LINE('',#242153,#242154); +#242153 = CARTESIAN_POINT('',(162.848585,-49.466551,1.585)); +#242154 = VECTOR('',#242155,1.); +#242155 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#242156 = ORIENTED_EDGE('',*,*,#242157,.T.); +#242157 = EDGE_CURVE('',#242150,#242158,#242160,.T.); +#242158 = VERTEX_POINT('',#242159); +#242159 = CARTESIAN_POINT('',(163.014316,-49.342996,1.585)); +#242160 = LINE('',#242161,#242162); +#242161 = CARTESIAN_POINT('',(162.932937,-49.424375,1.585)); +#242162 = VECTOR('',#242163,1.); +#242163 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242164 = ORIENTED_EDGE('',*,*,#242165,.T.); +#242165 = EDGE_CURVE('',#242158,#242040,#242166,.T.); +#242166 = LINE('',#242167,#242168); +#242167 = CARTESIAN_POINT('',(163.014316,-49.342996,1.585)); +#242168 = VECTOR('',#242169,1.); +#242169 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#242170 = PLANE('',#242171); +#242171 = AXIS2_PLACEMENT_3D('',#242172,#242173,#242174); +#242172 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242173 = DIRECTION('',(0.,0.,1.)); +#242174 = DIRECTION('',(1.,0.,-0.)); +#242175 = SHELL_BASED_SURFACE_MODEL('',(#242176)); +#242176 = OPEN_SHELL('',(#242177)); +#242177 = ADVANCED_FACE('',(#242178),#242363,.T.); +#242178 = FACE_BOUND('',#242179,.F.); +#242179 = EDGE_LOOP('',(#242180,#242191,#242199,#242208,#242216,#242225, + #242233,#242242,#242250,#242258,#242266,#242275,#242283,#242292, + #242300,#242309,#242317,#242325,#242333,#242341,#242349,#242357)); +#242180 = ORIENTED_EDGE('',*,*,#242181,.T.); +#242181 = EDGE_CURVE('',#242182,#242184,#242186,.T.); +#242182 = VERTEX_POINT('',#242183); +#242183 = CARTESIAN_POINT('',(161.083078,-49.230381,1.585)); +#242184 = VERTEX_POINT('',#242185); +#242185 = CARTESIAN_POINT('',(161.542841,-49.233178,1.585)); +#242186 = CIRCLE('',#242187,0.460785175821); +#242187 = AXIS2_PLACEMENT_3D('',#242188,#242189,#242190); +#242188 = CARTESIAN_POINT('',(161.31053010897,-49.63111597024,1.585)); +#242189 = DIRECTION('',(0.,0.,-1.)); +#242190 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#242191 = ORIENTED_EDGE('',*,*,#242192,.T.); +#242192 = EDGE_CURVE('',#242184,#242193,#242195,.T.); +#242193 = VERTEX_POINT('',#242194); +#242194 = CARTESIAN_POINT('',(161.611152,-49.301489,1.585)); +#242195 = LINE('',#242196,#242197); +#242196 = CARTESIAN_POINT('',(161.542841,-49.233178,1.585)); +#242197 = VECTOR('',#242198,1.); +#242198 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242199 = ORIENTED_EDGE('',*,*,#242200,.T.); +#242200 = EDGE_CURVE('',#242193,#242201,#242203,.T.); +#242201 = VERTEX_POINT('',#242202); +#242202 = CARTESIAN_POINT('',(161.495759,-49.39619,1.585)); +#242203 = CIRCLE('',#242204,7.500003178657E-02); +#242204 = AXIS2_PLACEMENT_3D('',#242205,#242206,#242207); +#242205 = CARTESIAN_POINT('',(161.54879156212,-49.3431565,1.585)); +#242206 = DIRECTION('',(0.,0.,-1.)); +#242207 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#242208 = ORIENTED_EDGE('',*,*,#242209,.T.); +#242209 = EDGE_CURVE('',#242201,#242210,#242212,.T.); +#242210 = VERTEX_POINT('',#242211); +#242211 = CARTESIAN_POINT('',(161.460659,-49.36109,1.585)); +#242212 = LINE('',#242213,#242214); +#242213 = CARTESIAN_POINT('',(161.495759,-49.39619,1.585)); +#242214 = VECTOR('',#242215,1.); +#242215 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242216 = ORIENTED_EDGE('',*,*,#242217,.T.); +#242217 = EDGE_CURVE('',#242210,#242218,#242220,.T.); +#242218 = VERTEX_POINT('',#242219); +#242219 = CARTESIAN_POINT('',(161.160735,-49.36109,1.585)); +#242220 = CIRCLE('',#242221,0.299308637371); +#242221 = AXIS2_PLACEMENT_3D('',#242222,#242223,#242224); +#242222 = CARTESIAN_POINT('',(161.310697,-49.620121,1.585)); +#242223 = DIRECTION('',(0.,0.,1.)); +#242224 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#242225 = ORIENTED_EDGE('',*,*,#242226,.T.); +#242226 = EDGE_CURVE('',#242218,#242227,#242229,.T.); +#242227 = VERTEX_POINT('',#242228); +#242228 = CARTESIAN_POINT('',(161.086622,-49.435203,1.585)); +#242229 = LINE('',#242230,#242231); +#242230 = CARTESIAN_POINT('',(161.160735,-49.36109,1.585)); +#242231 = VECTOR('',#242232,1.); +#242232 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#242233 = ORIENTED_EDGE('',*,*,#242234,.T.); +#242234 = EDGE_CURVE('',#242227,#242235,#242237,.T.); +#242235 = VERTEX_POINT('',#242236); +#242236 = CARTESIAN_POINT('',(161.004745,-49.810113,1.585)); +#242237 = CIRCLE('',#242238,0.611712714362); +#242238 = AXIS2_PLACEMENT_3D('',#242239,#242240,#242241); +#242239 = CARTESIAN_POINT('',(161.61315027521,-49.7465876822,1.585)); +#242240 = DIRECTION('',(0.,0.,1.)); +#242241 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#242242 = ORIENTED_EDGE('',*,*,#242243,.T.); +#242243 = EDGE_CURVE('',#242235,#242244,#242246,.T.); +#242244 = VERTEX_POINT('',#242245); +#242245 = CARTESIAN_POINT('',(161.048128,-49.983647,1.585)); +#242246 = LINE('',#242247,#242248); +#242247 = CARTESIAN_POINT('',(161.004745,-49.810113,1.585)); +#242248 = VECTOR('',#242249,1.); +#242249 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#242250 = ORIENTED_EDGE('',*,*,#242251,.T.); +#242251 = EDGE_CURVE('',#242244,#242252,#242254,.T.); +#242252 = VERTEX_POINT('',#242253); +#242253 = CARTESIAN_POINT('',(161.086622,-50.060634,1.585)); +#242254 = LINE('',#242255,#242256); +#242255 = CARTESIAN_POINT('',(161.048128,-49.983647,1.585)); +#242256 = VECTOR('',#242257,1.); +#242257 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#242258 = ORIENTED_EDGE('',*,*,#242259,.T.); +#242259 = EDGE_CURVE('',#242252,#242260,#242262,.T.); +#242260 = VERTEX_POINT('',#242261); +#242261 = CARTESIAN_POINT('',(161.160735,-50.134748,1.585)); +#242262 = LINE('',#242263,#242264); +#242263 = CARTESIAN_POINT('',(161.086622,-50.060634,1.585)); +#242264 = VECTOR('',#242265,1.); +#242265 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#242266 = ORIENTED_EDGE('',*,*,#242267,.T.); +#242267 = EDGE_CURVE('',#242260,#242268,#242270,.T.); +#242268 = VERTEX_POINT('',#242269); +#242269 = CARTESIAN_POINT('',(161.460659,-50.134747,1.585)); +#242270 = CIRCLE('',#242271,0.299305962385); +#242271 = AXIS2_PLACEMENT_3D('',#242272,#242273,#242274); +#242272 = CARTESIAN_POINT('',(161.31069613635,-49.87571959093,1.585)); +#242273 = DIRECTION('',(0.,0.,1.)); +#242274 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#242275 = ORIENTED_EDGE('',*,*,#242276,.T.); +#242276 = EDGE_CURVE('',#242268,#242277,#242279,.T.); +#242277 = VERTEX_POINT('',#242278); +#242278 = CARTESIAN_POINT('',(161.507124,-50.09032,1.585)); +#242279 = LINE('',#242280,#242281); +#242280 = CARTESIAN_POINT('',(161.460659,-50.134747,1.585)); +#242281 = VECTOR('',#242282,1.); +#242282 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#242283 = ORIENTED_EDGE('',*,*,#242284,.T.); +#242284 = EDGE_CURVE('',#242277,#242285,#242287,.T.); +#242285 = VERTEX_POINT('',#242286); +#242286 = CARTESIAN_POINT('',(161.601825,-50.205713,1.585)); +#242287 = CIRCLE('',#242288,7.499993690112E-02); +#242288 = AXIS2_PLACEMENT_3D('',#242289,#242290,#242291); +#242289 = CARTESIAN_POINT('',(161.5487922483,-50.15267982374,1.585)); +#242290 = DIRECTION('',(0.,0.,-1.)); +#242291 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#242292 = ORIENTED_EDGE('',*,*,#242293,.T.); +#242293 = EDGE_CURVE('',#242285,#242294,#242296,.T.); +#242294 = VERTEX_POINT('',#242295); +#242295 = CARTESIAN_POINT('',(161.538315,-50.265457,1.585)); +#242296 = LINE('',#242297,#242298); +#242297 = CARTESIAN_POINT('',(161.601825,-50.205713,1.585)); +#242298 = VECTOR('',#242299,1.); +#242299 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#242300 = ORIENTED_EDGE('',*,*,#242301,.T.); +#242301 = EDGE_CURVE('',#242294,#242302,#242304,.T.); +#242302 = VERTEX_POINT('',#242303); +#242303 = CARTESIAN_POINT('',(161.078553,-50.262661,1.585)); +#242304 = CIRCLE('',#242305,0.461067828848); +#242305 = AXIS2_PLACEMENT_3D('',#242306,#242307,#242308); +#242306 = CARTESIAN_POINT('',(161.31086451268,-49.86439613352,1.585)); +#242307 = DIRECTION('',(-0.,0.,-1.)); +#242308 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#242309 = ORIENTED_EDGE('',*,*,#242310,.T.); +#242310 = EDGE_CURVE('',#242302,#242311,#242313,.T.); +#242311 = VERTEX_POINT('',#242312); +#242312 = CARTESIAN_POINT('',(160.961864,-50.144898,1.585)); +#242313 = LINE('',#242314,#242315); +#242314 = CARTESIAN_POINT('',(161.078553,-50.262661,1.585)); +#242315 = VECTOR('',#242316,1.); +#242316 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#242317 = ORIENTED_EDGE('',*,*,#242318,.T.); +#242318 = EDGE_CURVE('',#242311,#242319,#242321,.T.); +#242319 = VERTEX_POINT('',#242320); +#242320 = CARTESIAN_POINT('',(160.904603,-50.028013,1.585)); +#242321 = LINE('',#242322,#242323); +#242322 = CARTESIAN_POINT('',(160.961864,-50.144898,1.585)); +#242323 = VECTOR('',#242324,1.); +#242324 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#242325 = ORIENTED_EDGE('',*,*,#242326,.T.); +#242326 = EDGE_CURVE('',#242319,#242327,#242329,.T.); +#242327 = VERTEX_POINT('',#242328); +#242328 = CARTESIAN_POINT('',(160.854745,-49.819347,1.585)); +#242329 = LINE('',#242330,#242331); +#242330 = CARTESIAN_POINT('',(160.904603,-50.028013,1.585)); +#242331 = VECTOR('',#242332,1.); +#242332 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#242333 = ORIENTED_EDGE('',*,*,#242334,.T.); +#242334 = EDGE_CURVE('',#242327,#242335,#242337,.T.); +#242335 = VERTEX_POINT('',#242336); +#242336 = CARTESIAN_POINT('',(160.856984,-49.6583,1.585)); +#242337 = LINE('',#242338,#242339); +#242338 = CARTESIAN_POINT('',(160.854745,-49.819347,1.585)); +#242339 = VECTOR('',#242340,1.); +#242340 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#242341 = ORIENTED_EDGE('',*,*,#242342,.T.); +#242342 = EDGE_CURVE('',#242335,#242343,#242345,.T.); +#242343 = VERTEX_POINT('',#242344); +#242344 = CARTESIAN_POINT('',(160.910282,-49.452473,1.585)); +#242345 = LINE('',#242346,#242347); +#242346 = CARTESIAN_POINT('',(160.856984,-49.6583,1.585)); +#242347 = VECTOR('',#242348,1.); +#242348 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#242349 = ORIENTED_EDGE('',*,*,#242350,.T.); +#242350 = EDGE_CURVE('',#242343,#242351,#242353,.T.); +#242351 = VERTEX_POINT('',#242352); +#242352 = CARTESIAN_POINT('',(160.967231,-49.343492,1.585)); +#242353 = LINE('',#242354,#242355); +#242354 = CARTESIAN_POINT('',(160.910282,-49.452473,1.585)); +#242355 = VECTOR('',#242356,1.); +#242356 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#242357 = ORIENTED_EDGE('',*,*,#242358,.T.); +#242358 = EDGE_CURVE('',#242351,#242182,#242359,.T.); +#242359 = LINE('',#242360,#242361); +#242360 = CARTESIAN_POINT('',(160.967231,-49.343492,1.585)); +#242361 = VECTOR('',#242362,1.); +#242362 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#242363 = PLANE('',#242364); +#242364 = AXIS2_PLACEMENT_3D('',#242365,#242366,#242367); +#242365 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242366 = DIRECTION('',(0.,0.,1.)); +#242367 = DIRECTION('',(1.,0.,-0.)); +#242368 = SHELL_BASED_SURFACE_MODEL('',(#242369)); +#242369 = OPEN_SHELL('',(#242370)); +#242370 = ADVANCED_FACE('',(#242371),#242457,.T.); +#242371 = FACE_BOUND('',#242372,.F.); +#242372 = EDGE_LOOP('',(#242373,#242384,#242392,#242401,#242409,#242418, + #242426,#242434,#242442,#242451)); +#242373 = ORIENTED_EDGE('',*,*,#242374,.T.); +#242374 = EDGE_CURVE('',#242375,#242377,#242379,.T.); +#242375 = VERTEX_POINT('',#242376); +#242376 = CARTESIAN_POINT('',(167.09665,-50.1681,1.585)); +#242377 = VERTEX_POINT('',#242378); +#242378 = CARTESIAN_POINT('',(167.15665,-50.1081,1.585)); +#242379 = CIRCLE('',#242380,5.999932016256E-02); +#242380 = AXIS2_PLACEMENT_3D('',#242381,#242382,#242383); +#242381 = CARTESIAN_POINT('',(167.15664932015,-50.16809932015,1.585)); +#242382 = DIRECTION('',(0.,0.,-1.)); +#242383 = DIRECTION('',(-0.999999999936,-1.133081683198E-05,-0.)); +#242384 = ORIENTED_EDGE('',*,*,#242385,.T.); +#242385 = EDGE_CURVE('',#242377,#242386,#242388,.T.); +#242386 = VERTEX_POINT('',#242387); +#242387 = CARTESIAN_POINT('',(171.27665,-50.1081,1.585)); +#242388 = LINE('',#242389,#242390); +#242389 = CARTESIAN_POINT('',(167.15665,-50.1081,1.585)); +#242390 = VECTOR('',#242391,1.); +#242391 = DIRECTION('',(1.,0.,0.)); +#242392 = ORIENTED_EDGE('',*,*,#242393,.T.); +#242393 = EDGE_CURVE('',#242386,#242394,#242396,.T.); +#242394 = VERTEX_POINT('',#242395); +#242395 = CARTESIAN_POINT('',(171.33665,-50.1681,1.585)); +#242396 = CIRCLE('',#242397,5.999932016259E-02); +#242397 = AXIS2_PLACEMENT_3D('',#242398,#242399,#242400); +#242398 = CARTESIAN_POINT('',(171.27665067984,-50.16809932015,1.585)); +#242399 = DIRECTION('',(0.,0.,-1.)); +#242400 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#242401 = ORIENTED_EDGE('',*,*,#242402,.T.); +#242402 = EDGE_CURVE('',#242394,#242403,#242405,.T.); +#242403 = VERTEX_POINT('',#242404); +#242404 = CARTESIAN_POINT('',(171.33665,-50.2631,1.585)); +#242405 = LINE('',#242406,#242407); +#242406 = CARTESIAN_POINT('',(171.33665,-50.1681,1.585)); +#242407 = VECTOR('',#242408,1.); +#242408 = DIRECTION('',(0.,-1.,0.)); +#242409 = ORIENTED_EDGE('',*,*,#242410,.T.); +#242410 = EDGE_CURVE('',#242403,#242411,#242413,.T.); +#242411 = VERTEX_POINT('',#242412); +#242412 = CARTESIAN_POINT('',(171.221217,-50.286061,1.585)); +#242413 = CIRCLE('',#242414,6.000007318647E-02); +#242414 = AXIS2_PLACEMENT_3D('',#242415,#242416,#242417); +#242415 = CARTESIAN_POINT('',(171.27664992681,-50.26310017668,1.585)); +#242416 = DIRECTION('',(0.,0.,-1.)); +#242417 = DIRECTION('',(0.999999999996,2.944769485282E-06,0.)); +#242418 = ORIENTED_EDGE('',*,*,#242419,.T.); +#242419 = EDGE_CURVE('',#242411,#242420,#242422,.T.); +#242420 = VERTEX_POINT('',#242421); +#242421 = CARTESIAN_POINT('',(171.21665,-50.2281,1.585)); +#242422 = LINE('',#242423,#242424); +#242423 = CARTESIAN_POINT('',(171.221217,-50.286061,1.585)); +#242424 = VECTOR('',#242425,1.); +#242425 = DIRECTION('',(-7.855089539736E-02,0.99691010469,0.)); +#242426 = ORIENTED_EDGE('',*,*,#242427,.T.); +#242427 = EDGE_CURVE('',#242420,#242428,#242430,.T.); +#242428 = VERTEX_POINT('',#242429); +#242429 = CARTESIAN_POINT('',(167.21665,-50.2281,1.585)); +#242430 = LINE('',#242431,#242432); +#242431 = CARTESIAN_POINT('',(171.21665,-50.2281,1.585)); +#242432 = VECTOR('',#242433,1.); +#242433 = DIRECTION('',(-1.,0.,0.)); +#242434 = ORIENTED_EDGE('',*,*,#242435,.T.); +#242435 = EDGE_CURVE('',#242428,#242436,#242438,.T.); +#242436 = VERTEX_POINT('',#242437); +#242437 = CARTESIAN_POINT('',(167.212083,-50.286061,1.585)); +#242438 = LINE('',#242439,#242440); +#242439 = CARTESIAN_POINT('',(167.21665,-50.2281,1.585)); +#242440 = VECTOR('',#242441,1.); +#242441 = DIRECTION('',(-7.855089539687E-02,-0.99691010469,0.)); +#242442 = ORIENTED_EDGE('',*,*,#242443,.T.); +#242443 = EDGE_CURVE('',#242436,#242444,#242446,.T.); +#242444 = VERTEX_POINT('',#242445); +#242445 = CARTESIAN_POINT('',(167.09665,-50.2631,1.585)); +#242446 = CIRCLE('',#242447,6.000007318647E-02); +#242447 = AXIS2_PLACEMENT_3D('',#242448,#242449,#242450); +#242448 = CARTESIAN_POINT('',(167.15665007318,-50.26310017668,1.585)); +#242449 = DIRECTION('',(-0.,0.,-1.)); +#242450 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#242451 = ORIENTED_EDGE('',*,*,#242452,.T.); +#242452 = EDGE_CURVE('',#242444,#242375,#242453,.T.); +#242453 = LINE('',#242454,#242455); +#242454 = CARTESIAN_POINT('',(167.09665,-50.2631,1.585)); +#242455 = VECTOR('',#242456,1.); +#242456 = DIRECTION('',(0.,1.,0.)); +#242457 = PLANE('',#242458); +#242458 = AXIS2_PLACEMENT_3D('',#242459,#242460,#242461); +#242459 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242460 = DIRECTION('',(0.,0.,1.)); +#242461 = DIRECTION('',(1.,0.,-0.)); +#242462 = SHELL_BASED_SURFACE_MODEL('',(#242463)); +#242463 = OPEN_SHELL('',(#242464)); +#242464 = ADVANCED_FACE('',(#242465),#242542,.T.); +#242465 = FACE_BOUND('',#242466,.F.); +#242466 = EDGE_LOOP('',(#242467,#242478,#242486,#242495,#242503,#242511, + #242519,#242527,#242536)); +#242467 = ORIENTED_EDGE('',*,*,#242468,.T.); +#242468 = EDGE_CURVE('',#242469,#242471,#242473,.T.); +#242469 = VERTEX_POINT('',#242470); +#242470 = CARTESIAN_POINT('',(179.417494,-50.071478,1.585)); +#242471 = VERTEX_POINT('',#242472); +#242472 = CARTESIAN_POINT('',(179.379093,-49.944886,1.585)); +#242473 = CIRCLE('',#242474,7.500021013109E-02); +#242474 = AXIS2_PLACEMENT_3D('',#242475,#242476,#242477); +#242475 = CARTESIAN_POINT('',(179.4321263167,-49.99791899764,1.585)); +#242476 = DIRECTION('',(0.,0.,-1.)); +#242477 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#242478 = ORIENTED_EDGE('',*,*,#242479,.T.); +#242479 = EDGE_CURVE('',#242471,#242480,#242482,.T.); +#242480 = VERTEX_POINT('',#242481); +#242481 = CARTESIAN_POINT('',(179.457193,-49.866785,1.585)); +#242482 = LINE('',#242483,#242484); +#242483 = CARTESIAN_POINT('',(179.379093,-49.944886,1.585)); +#242484 = VECTOR('',#242485,1.); +#242485 = DIRECTION('',(0.707102254269,0.707111308075,0.)); +#242486 = ORIENTED_EDGE('',*,*,#242487,.T.); +#242487 = EDGE_CURVE('',#242480,#242488,#242490,.T.); +#242488 = VERTEX_POINT('',#242489); +#242489 = CARTESIAN_POINT('',(179.60335,-49.9852,1.585)); +#242490 = CIRCLE('',#242491,0.149052213346); +#242491 = AXIS2_PLACEMENT_3D('',#242492,#242493,#242494); +#242492 = CARTESIAN_POINT('',(179.6030626008,-49.83614806373,1.585)); +#242493 = DIRECTION('',(0.,0.,1.)); +#242494 = DIRECTION('',(-0.978647666694,-0.205544993797,0.)); +#242495 = ORIENTED_EDGE('',*,*,#242496,.T.); +#242496 = EDGE_CURVE('',#242488,#242497,#242499,.T.); +#242497 = VERTEX_POINT('',#242498); +#242498 = CARTESIAN_POINT('',(179.632614,-49.982318,1.585)); +#242499 = LINE('',#242500,#242501); +#242500 = CARTESIAN_POINT('',(179.60335,-49.9852,1.585)); +#242501 = VECTOR('',#242502,1.); +#242502 = DIRECTION('',(0.995185563998,9.800863844463E-02,0.)); +#242503 = ORIENTED_EDGE('',*,*,#242504,.T.); +#242504 = EDGE_CURVE('',#242497,#242505,#242507,.T.); +#242505 = VERTEX_POINT('',#242506); +#242506 = CARTESIAN_POINT('',(179.686686,-49.95992,1.585)); +#242507 = LINE('',#242508,#242509); +#242508 = CARTESIAN_POINT('',(179.632614,-49.982318,1.585)); +#242509 = VECTOR('',#242510,1.); +#242510 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#242511 = ORIENTED_EDGE('',*,*,#242512,.T.); +#242512 = EDGE_CURVE('',#242505,#242513,#242515,.T.); +#242513 = VERTEX_POINT('',#242514); +#242514 = CARTESIAN_POINT('',(179.723336,-49.923269,1.585)); +#242515 = LINE('',#242516,#242517); +#242516 = CARTESIAN_POINT('',(179.686686,-49.95992,1.585)); +#242517 = VECTOR('',#242518,1.); +#242518 = DIRECTION('',(0.707097134502,0.707116427739,0.)); +#242519 = ORIENTED_EDGE('',*,*,#242520,.T.); +#242520 = EDGE_CURVE('',#242513,#242521,#242523,.T.); +#242521 = VERTEX_POINT('',#242522); +#242522 = CARTESIAN_POINT('',(180.065805,-49.92436,1.585)); +#242523 = LINE('',#242524,#242525); +#242524 = CARTESIAN_POINT('',(179.723336,-49.923269,1.585)); +#242525 = VECTOR('',#242526,1.); +#242526 = DIRECTION('',(0.999994925729,-3.185673634614E-03,0.)); +#242527 = ORIENTED_EDGE('',*,*,#242528,.T.); +#242528 = EDGE_CURVE('',#242521,#242529,#242531,.T.); +#242529 = VERTEX_POINT('',#242530); +#242530 = CARTESIAN_POINT('',(180.051173,-50.072919,1.585)); +#242531 = CIRCLE('',#242532,7.500006711464E-02); +#242532 = AXIS2_PLACEMENT_3D('',#242533,#242534,#242535); +#242533 = CARTESIAN_POINT('',(180.05117306711,-49.99791893288,1.585)); +#242534 = DIRECTION('',(0.,0.,-1.)); +#242535 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#242536 = ORIENTED_EDGE('',*,*,#242537,.T.); +#242537 = EDGE_CURVE('',#242529,#242469,#242538,.T.); +#242538 = LINE('',#242539,#242540); +#242539 = CARTESIAN_POINT('',(180.051173,-50.072919,1.585)); +#242540 = VECTOR('',#242541,1.); +#242541 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#242542 = PLANE('',#242543); +#242543 = AXIS2_PLACEMENT_3D('',#242544,#242545,#242546); +#242544 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242545 = DIRECTION('',(0.,0.,1.)); +#242546 = DIRECTION('',(1.,0.,-0.)); +#242547 = SHELL_BASED_SURFACE_MODEL('',(#242548)); +#242548 = OPEN_SHELL('',(#242549)); +#242549 = ADVANCED_FACE('',(#242550),#242735,.T.); +#242550 = FACE_BOUND('',#242551,.F.); +#242551 = EDGE_LOOP('',(#242552,#242563,#242571,#242580,#242588,#242597, + #242605,#242614,#242622,#242630,#242638,#242647,#242655,#242664, + #242672,#242681,#242689,#242697,#242705,#242713,#242721,#242729)); +#242552 = ORIENTED_EDGE('',*,*,#242553,.T.); +#242553 = EDGE_CURVE('',#242554,#242556,#242558,.T.); +#242554 = VERTEX_POINT('',#242555); +#242555 = CARTESIAN_POINT('',(178.633078,-48.980381,1.585)); +#242556 = VERTEX_POINT('',#242557); +#242557 = CARTESIAN_POINT('',(179.092841,-48.983178,1.585)); +#242558 = CIRCLE('',#242559,0.460785175821); +#242559 = AXIS2_PLACEMENT_3D('',#242560,#242561,#242562); +#242560 = CARTESIAN_POINT('',(178.86053010897,-49.38111597024,1.585)); +#242561 = DIRECTION('',(0.,0.,-1.)); +#242562 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#242563 = ORIENTED_EDGE('',*,*,#242564,.T.); +#242564 = EDGE_CURVE('',#242556,#242565,#242567,.T.); +#242565 = VERTEX_POINT('',#242566); +#242566 = CARTESIAN_POINT('',(179.161152,-49.051489,1.585)); +#242567 = LINE('',#242568,#242569); +#242568 = CARTESIAN_POINT('',(179.092841,-48.983178,1.585)); +#242569 = VECTOR('',#242570,1.); +#242570 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242571 = ORIENTED_EDGE('',*,*,#242572,.T.); +#242572 = EDGE_CURVE('',#242565,#242573,#242575,.T.); +#242573 = VERTEX_POINT('',#242574); +#242574 = CARTESIAN_POINT('',(179.045759,-49.14619,1.585)); +#242575 = CIRCLE('',#242576,7.500003178655E-02); +#242576 = AXIS2_PLACEMENT_3D('',#242577,#242578,#242579); +#242577 = CARTESIAN_POINT('',(179.09879156212,-49.0931565,1.585)); +#242578 = DIRECTION('',(0.,0.,-1.)); +#242579 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#242580 = ORIENTED_EDGE('',*,*,#242581,.T.); +#242581 = EDGE_CURVE('',#242573,#242582,#242584,.T.); +#242582 = VERTEX_POINT('',#242583); +#242583 = CARTESIAN_POINT('',(179.010659,-49.11109,1.585)); +#242584 = LINE('',#242585,#242586); +#242585 = CARTESIAN_POINT('',(179.045759,-49.14619,1.585)); +#242586 = VECTOR('',#242587,1.); +#242587 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242588 = ORIENTED_EDGE('',*,*,#242589,.T.); +#242589 = EDGE_CURVE('',#242582,#242590,#242592,.T.); +#242590 = VERTEX_POINT('',#242591); +#242591 = CARTESIAN_POINT('',(178.710735,-49.11109,1.585)); +#242592 = CIRCLE('',#242593,0.299308637371); +#242593 = AXIS2_PLACEMENT_3D('',#242594,#242595,#242596); +#242594 = CARTESIAN_POINT('',(178.860697,-49.370121,1.585)); +#242595 = DIRECTION('',(0.,0.,1.)); +#242596 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#242597 = ORIENTED_EDGE('',*,*,#242598,.T.); +#242598 = EDGE_CURVE('',#242590,#242599,#242601,.T.); +#242599 = VERTEX_POINT('',#242600); +#242600 = CARTESIAN_POINT('',(178.636622,-49.185203,1.585)); +#242601 = LINE('',#242602,#242603); +#242602 = CARTESIAN_POINT('',(178.710735,-49.11109,1.585)); +#242603 = VECTOR('',#242604,1.); +#242604 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#242605 = ORIENTED_EDGE('',*,*,#242606,.T.); +#242606 = EDGE_CURVE('',#242599,#242607,#242609,.T.); +#242607 = VERTEX_POINT('',#242608); +#242608 = CARTESIAN_POINT('',(178.554745,-49.560113,1.585)); +#242609 = CIRCLE('',#242610,0.611712714363); +#242610 = AXIS2_PLACEMENT_3D('',#242611,#242612,#242613); +#242611 = CARTESIAN_POINT('',(179.16315027521,-49.4965876822,1.585)); +#242612 = DIRECTION('',(0.,0.,1.)); +#242613 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#242614 = ORIENTED_EDGE('',*,*,#242615,.T.); +#242615 = EDGE_CURVE('',#242607,#242616,#242618,.T.); +#242616 = VERTEX_POINT('',#242617); +#242617 = CARTESIAN_POINT('',(178.598128,-49.733647,1.585)); +#242618 = LINE('',#242619,#242620); +#242619 = CARTESIAN_POINT('',(178.554745,-49.560113,1.585)); +#242620 = VECTOR('',#242621,1.); +#242621 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#242622 = ORIENTED_EDGE('',*,*,#242623,.T.); +#242623 = EDGE_CURVE('',#242616,#242624,#242626,.T.); +#242624 = VERTEX_POINT('',#242625); +#242625 = CARTESIAN_POINT('',(178.636622,-49.810634,1.585)); +#242626 = LINE('',#242627,#242628); +#242627 = CARTESIAN_POINT('',(178.598128,-49.733647,1.585)); +#242628 = VECTOR('',#242629,1.); +#242629 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#242630 = ORIENTED_EDGE('',*,*,#242631,.T.); +#242631 = EDGE_CURVE('',#242624,#242632,#242634,.T.); +#242632 = VERTEX_POINT('',#242633); +#242633 = CARTESIAN_POINT('',(178.710735,-49.884748,1.585)); +#242634 = LINE('',#242635,#242636); +#242635 = CARTESIAN_POINT('',(178.636622,-49.810634,1.585)); +#242636 = VECTOR('',#242637,1.); +#242637 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#242638 = ORIENTED_EDGE('',*,*,#242639,.T.); +#242639 = EDGE_CURVE('',#242632,#242640,#242642,.T.); +#242640 = VERTEX_POINT('',#242641); +#242641 = CARTESIAN_POINT('',(179.010659,-49.884747,1.585)); +#242642 = CIRCLE('',#242643,0.299305962385); +#242643 = AXIS2_PLACEMENT_3D('',#242644,#242645,#242646); +#242644 = CARTESIAN_POINT('',(178.86069613635,-49.62571959093,1.585)); +#242645 = DIRECTION('',(0.,0.,1.)); +#242646 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#242647 = ORIENTED_EDGE('',*,*,#242648,.T.); +#242648 = EDGE_CURVE('',#242640,#242649,#242651,.T.); +#242649 = VERTEX_POINT('',#242650); +#242650 = CARTESIAN_POINT('',(179.057124,-49.84032,1.585)); +#242651 = LINE('',#242652,#242653); +#242652 = CARTESIAN_POINT('',(179.010659,-49.884747,1.585)); +#242653 = VECTOR('',#242654,1.); +#242654 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#242655 = ORIENTED_EDGE('',*,*,#242656,.T.); +#242656 = EDGE_CURVE('',#242649,#242657,#242659,.T.); +#242657 = VERTEX_POINT('',#242658); +#242658 = CARTESIAN_POINT('',(179.151825,-49.955713,1.585)); +#242659 = CIRCLE('',#242660,7.499993690112E-02); +#242660 = AXIS2_PLACEMENT_3D('',#242661,#242662,#242663); +#242661 = CARTESIAN_POINT('',(179.0987922483,-49.90267982374,1.585)); +#242662 = DIRECTION('',(0.,0.,-1.)); +#242663 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#242664 = ORIENTED_EDGE('',*,*,#242665,.T.); +#242665 = EDGE_CURVE('',#242657,#242666,#242668,.T.); +#242666 = VERTEX_POINT('',#242667); +#242667 = CARTESIAN_POINT('',(179.088315,-50.015457,1.585)); +#242668 = LINE('',#242669,#242670); +#242669 = CARTESIAN_POINT('',(179.151825,-49.955713,1.585)); +#242670 = VECTOR('',#242671,1.); +#242671 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#242672 = ORIENTED_EDGE('',*,*,#242673,.T.); +#242673 = EDGE_CURVE('',#242666,#242674,#242676,.T.); +#242674 = VERTEX_POINT('',#242675); +#242675 = CARTESIAN_POINT('',(178.628553,-50.012661,1.585)); +#242676 = CIRCLE('',#242677,0.461067828848); +#242677 = AXIS2_PLACEMENT_3D('',#242678,#242679,#242680); +#242678 = CARTESIAN_POINT('',(178.86086451268,-49.61439613352,1.585)); +#242679 = DIRECTION('',(-0.,0.,-1.)); +#242680 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#242681 = ORIENTED_EDGE('',*,*,#242682,.T.); +#242682 = EDGE_CURVE('',#242674,#242683,#242685,.T.); +#242683 = VERTEX_POINT('',#242684); +#242684 = CARTESIAN_POINT('',(178.511864,-49.894898,1.585)); +#242685 = LINE('',#242686,#242687); +#242686 = CARTESIAN_POINT('',(178.628553,-50.012661,1.585)); +#242687 = VECTOR('',#242688,1.); +#242688 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#242689 = ORIENTED_EDGE('',*,*,#242690,.T.); +#242690 = EDGE_CURVE('',#242683,#242691,#242693,.T.); +#242691 = VERTEX_POINT('',#242692); +#242692 = CARTESIAN_POINT('',(178.454603,-49.778013,1.585)); +#242693 = LINE('',#242694,#242695); +#242694 = CARTESIAN_POINT('',(178.511864,-49.894898,1.585)); +#242695 = VECTOR('',#242696,1.); +#242696 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#242697 = ORIENTED_EDGE('',*,*,#242698,.T.); +#242698 = EDGE_CURVE('',#242691,#242699,#242701,.T.); +#242699 = VERTEX_POINT('',#242700); +#242700 = CARTESIAN_POINT('',(178.404745,-49.569347,1.585)); +#242701 = LINE('',#242702,#242703); +#242702 = CARTESIAN_POINT('',(178.454603,-49.778013,1.585)); +#242703 = VECTOR('',#242704,1.); +#242704 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#242705 = ORIENTED_EDGE('',*,*,#242706,.T.); +#242706 = EDGE_CURVE('',#242699,#242707,#242709,.T.); +#242707 = VERTEX_POINT('',#242708); +#242708 = CARTESIAN_POINT('',(178.406984,-49.4083,1.585)); +#242709 = LINE('',#242710,#242711); +#242710 = CARTESIAN_POINT('',(178.404745,-49.569347,1.585)); +#242711 = VECTOR('',#242712,1.); +#242712 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#242713 = ORIENTED_EDGE('',*,*,#242714,.T.); +#242714 = EDGE_CURVE('',#242707,#242715,#242717,.T.); +#242715 = VERTEX_POINT('',#242716); +#242716 = CARTESIAN_POINT('',(178.460282,-49.202473,1.585)); +#242717 = LINE('',#242718,#242719); +#242718 = CARTESIAN_POINT('',(178.406984,-49.4083,1.585)); +#242719 = VECTOR('',#242720,1.); +#242720 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#242721 = ORIENTED_EDGE('',*,*,#242722,.T.); +#242722 = EDGE_CURVE('',#242715,#242723,#242725,.T.); +#242723 = VERTEX_POINT('',#242724); +#242724 = CARTESIAN_POINT('',(178.517231,-49.093492,1.585)); +#242725 = LINE('',#242726,#242727); +#242726 = CARTESIAN_POINT('',(178.460282,-49.202473,1.585)); +#242727 = VECTOR('',#242728,1.); +#242728 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#242729 = ORIENTED_EDGE('',*,*,#242730,.T.); +#242730 = EDGE_CURVE('',#242723,#242554,#242731,.T.); +#242731 = LINE('',#242732,#242733); +#242732 = CARTESIAN_POINT('',(178.517231,-49.093492,1.585)); +#242733 = VECTOR('',#242734,1.); +#242734 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#242735 = PLANE('',#242736); +#242736 = AXIS2_PLACEMENT_3D('',#242737,#242738,#242739); +#242737 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242738 = DIRECTION('',(0.,0.,1.)); +#242739 = DIRECTION('',(1.,0.,-0.)); +#242740 = SHELL_BASED_SURFACE_MODEL('',(#242741)); +#242741 = OPEN_SHELL('',(#242742)); +#242742 = ADVANCED_FACE('',(#242743),#242929,.T.); +#242743 = FACE_BOUND('',#242744,.F.); +#242744 = EDGE_LOOP('',(#242745,#242756,#242764,#242773,#242781,#242789, + #242798,#242806,#242815,#242823,#242831,#242839,#242848,#242856, + #242865,#242873,#242882,#242890,#242898,#242906,#242915,#242923)); +#242745 = ORIENTED_EDGE('',*,*,#242746,.T.); +#242746 = EDGE_CURVE('',#242747,#242749,#242751,.T.); +#242747 = VERTEX_POINT('',#242748); +#242748 = CARTESIAN_POINT('',(180.369875,-49.071478,1.585)); +#242749 = VERTEX_POINT('',#242750); +#242750 = CARTESIAN_POINT('',(180.384507,-48.922919,1.585)); +#242751 = CIRCLE('',#242752,7.500006711464E-02); +#242752 = AXIS2_PLACEMENT_3D('',#242753,#242754,#242755); +#242753 = CARTESIAN_POINT('',(180.38450693288,-48.99791906711,1.585)); +#242754 = DIRECTION('',(0.,0.,-1.)); +#242755 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#242756 = ORIENTED_EDGE('',*,*,#242757,.T.); +#242757 = EDGE_CURVE('',#242749,#242758,#242760,.T.); +#242758 = VERTEX_POINT('',#242759); +#242759 = CARTESIAN_POINT('',(181.011292,-48.923681,1.585)); +#242760 = LINE('',#242761,#242762); +#242761 = CARTESIAN_POINT('',(180.384507,-48.922919,1.585)); +#242762 = VECTOR('',#242763,1.); +#242763 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#242764 = ORIENTED_EDGE('',*,*,#242765,.T.); +#242765 = EDGE_CURVE('',#242758,#242766,#242768,.T.); +#242766 = VERTEX_POINT('',#242767); +#242767 = CARTESIAN_POINT('',(181.077113,-49.012551,1.585)); +#242768 = CIRCLE('',#242769,7.447391611626E-02); +#242769 = AXIS2_PLACEMENT_3D('',#242770,#242771,#242772); +#242770 = CARTESIAN_POINT('',(181.00411292664,-48.9978080874,1.585)); +#242771 = DIRECTION('',(0.,0.,-1.)); +#242772 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#242773 = ORIENTED_EDGE('',*,*,#242774,.T.); +#242774 = EDGE_CURVE('',#242766,#242775,#242777,.T.); +#242775 = VERTEX_POINT('',#242776); +#242776 = CARTESIAN_POINT('',(181.059997,-49.047307,1.585)); +#242777 = LINE('',#242778,#242779); +#242778 = CARTESIAN_POINT('',(181.077113,-49.012551,1.585)); +#242779 = VECTOR('',#242780,1.); +#242780 = DIRECTION('',(-0.441795255026,-0.897115908139,0.)); +#242781 = ORIENTED_EDGE('',*,*,#242782,.T.); +#242782 = EDGE_CURVE('',#242775,#242783,#242785,.T.); +#242783 = VERTEX_POINT('',#242784); +#242784 = CARTESIAN_POINT('',(180.833101,-49.306616,1.585)); +#242785 = LINE('',#242786,#242787); +#242786 = CARTESIAN_POINT('',(181.059997,-49.047307,1.585)); +#242787 = VECTOR('',#242788,1.); +#242788 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#242789 = ORIENTED_EDGE('',*,*,#242790,.T.); +#242790 = EDGE_CURVE('',#242783,#242791,#242793,.T.); +#242791 = VERTEX_POINT('',#242792); +#242792 = CARTESIAN_POINT('',(181.077113,-49.554715,1.585)); +#242793 = CIRCLE('',#242794,0.348520834816); +#242794 = AXIS2_PLACEMENT_3D('',#242795,#242796,#242797); +#242795 = CARTESIAN_POINT('',(180.7398076174,-49.64241819931,1.585)); +#242796 = DIRECTION('',(0.,0.,-1.)); +#242797 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#242798 = ORIENTED_EDGE('',*,*,#242799,.T.); +#242799 = EDGE_CURVE('',#242791,#242800,#242802,.T.); +#242800 = VERTEX_POINT('',#242801); +#242801 = CARTESIAN_POINT('',(181.075891,-49.827252,1.585)); +#242802 = LINE('',#242803,#242804); +#242803 = CARTESIAN_POINT('',(181.077113,-49.554715,1.585)); +#242804 = VECTOR('',#242805,1.); +#242805 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#242806 = ORIENTED_EDGE('',*,*,#242807,.T.); +#242807 = EDGE_CURVE('',#242800,#242808,#242810,.T.); +#242808 = VERTEX_POINT('',#242809); +#242809 = CARTESIAN_POINT('',(180.82771,-50.071478,1.585)); +#242810 = CIRCLE('',#242811,0.348635327447); +#242811 = AXIS2_PLACEMENT_3D('',#242812,#242813,#242814); +#242812 = CARTESIAN_POINT('',(180.73993848129,-49.73407208415,1.585)); +#242813 = DIRECTION('',(0.,0.,-1.)); +#242814 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#242815 = ORIENTED_EDGE('',*,*,#242816,.T.); +#242816 = EDGE_CURVE('',#242808,#242817,#242819,.T.); +#242817 = VERTEX_POINT('',#242818); +#242818 = CARTESIAN_POINT('',(180.507554,-50.070256,1.585)); +#242819 = LINE('',#242820,#242821); +#242820 = CARTESIAN_POINT('',(180.82771,-50.071478,1.585)); +#242821 = VECTOR('',#242822,1.); +#242822 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#242823 = ORIENTED_EDGE('',*,*,#242824,.T.); +#242824 = EDGE_CURVE('',#242817,#242825,#242827,.T.); +#242825 = VERTEX_POINT('',#242826); +#242826 = CARTESIAN_POINT('',(180.384841,-50.00805,1.585)); +#242827 = LINE('',#242828,#242829); +#242828 = CARTESIAN_POINT('',(180.507554,-50.070256,1.585)); +#242829 = VECTOR('',#242830,1.); +#242830 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#242831 = ORIENTED_EDGE('',*,*,#242832,.T.); +#242832 = EDGE_CURVE('',#242825,#242833,#242835,.T.); +#242833 = VERTEX_POINT('',#242834); +#242834 = CARTESIAN_POINT('',(180.322146,-49.944347,1.585)); +#242835 = LINE('',#242836,#242837); +#242836 = CARTESIAN_POINT('',(180.384841,-50.00805,1.585)); +#242837 = VECTOR('',#242838,1.); +#242838 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#242839 = ORIENTED_EDGE('',*,*,#242840,.T.); +#242840 = EDGE_CURVE('',#242833,#242841,#242843,.T.); +#242841 = VERTEX_POINT('',#242842); +#242842 = CARTESIAN_POINT('',(180.437541,-49.849648,1.585)); +#242843 = CIRCLE('',#242844,7.50001266804E-02); +#242844 = AXIS2_PLACEMENT_3D('',#242845,#242846,#242847); +#242845 = CARTESIAN_POINT('',(180.38450705199,-49.90268024831,1.585)); +#242846 = DIRECTION('',(0.,0.,-1.)); +#242847 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#242848 = ORIENTED_EDGE('',*,*,#242849,.T.); +#242849 = EDGE_CURVE('',#242841,#242850,#242852,.T.); +#242850 = VERTEX_POINT('',#242851); +#242851 = CARTESIAN_POINT('',(180.476553,-49.888661,1.585)); +#242852 = LINE('',#242853,#242854); +#242853 = CARTESIAN_POINT('',(180.437541,-49.849648,1.585)); +#242854 = VECTOR('',#242855,1.); +#242855 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#242856 = ORIENTED_EDGE('',*,*,#242857,.T.); +#242857 = EDGE_CURVE('',#242850,#242858,#242860,.T.); +#242858 = VERTEX_POINT('',#242859); +#242859 = CARTESIAN_POINT('',(180.863888,-49.888661,1.585)); +#242860 = CIRCLE('',#242861,0.358502380266); +#242861 = AXIS2_PLACEMENT_3D('',#242862,#242863,#242864); +#242862 = CARTESIAN_POINT('',(180.6702205,-49.586971,1.585)); +#242863 = DIRECTION('',(0.,0.,1.)); +#242864 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#242865 = ORIENTED_EDGE('',*,*,#242866,.T.); +#242866 = EDGE_CURVE('',#242858,#242867,#242869,.T.); +#242867 = VERTEX_POINT('',#242868); +#242868 = CARTESIAN_POINT('',(180.894295,-49.858253,1.585)); +#242869 = LINE('',#242870,#242871); +#242870 = CARTESIAN_POINT('',(180.863888,-49.888661,1.585)); +#242871 = VECTOR('',#242872,1.); +#242872 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#242873 = ORIENTED_EDGE('',*,*,#242874,.T.); +#242874 = EDGE_CURVE('',#242867,#242875,#242877,.T.); +#242875 = VERTEX_POINT('',#242876); +#242876 = CARTESIAN_POINT('',(180.894296,-49.518536,1.585)); +#242877 = CIRCLE('',#242878,0.305616146029); +#242878 = AXIS2_PLACEMENT_3D('',#242879,#242880,#242881); +#242879 = CARTESIAN_POINT('',(180.64022992049,-49.68839375212,1.585)); +#242880 = DIRECTION('',(0.,-0.,1.)); +#242881 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#242882 = ORIENTED_EDGE('',*,*,#242883,.T.); +#242883 = EDGE_CURVE('',#242875,#242884,#242886,.T.); +#242884 = VERTEX_POINT('',#242885); +#242885 = CARTESIAN_POINT('',(180.863889,-49.488129,1.585)); +#242886 = LINE('',#242887,#242888); +#242887 = CARTESIAN_POINT('',(180.894296,-49.518536,1.585)); +#242888 = VECTOR('',#242889,1.); +#242889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242890 = ORIENTED_EDGE('',*,*,#242891,.T.); +#242891 = EDGE_CURVE('',#242884,#242892,#242894,.T.); +#242892 = VERTEX_POINT('',#242893); +#242893 = CARTESIAN_POINT('',(180.795373,-49.453871,1.585)); +#242894 = LINE('',#242895,#242896); +#242895 = CARTESIAN_POINT('',(180.863889,-49.488129,1.585)); +#242896 = VECTOR('',#242897,1.); +#242897 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#242898 = ORIENTED_EDGE('',*,*,#242899,.T.); +#242899 = EDGE_CURVE('',#242892,#242900,#242902,.T.); +#242900 = VERTEX_POINT('',#242901); +#242901 = CARTESIAN_POINT('',(180.655589,-49.45243,1.585)); +#242902 = LINE('',#242903,#242904); +#242903 = CARTESIAN_POINT('',(180.795373,-49.453871,1.585)); +#242904 = VECTOR('',#242905,1.); +#242905 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#242906 = ORIENTED_EDGE('',*,*,#242907,.T.); +#242907 = EDGE_CURVE('',#242900,#242908,#242910,.T.); +#242908 = VERTEX_POINT('',#242909); +#242909 = CARTESIAN_POINT('',(180.613778,-49.329483,1.585)); +#242910 = CIRCLE('',#242911,7.500015628756E-02); +#242911 = AXIS2_PLACEMENT_3D('',#242912,#242913,#242914); +#242912 = CARTESIAN_POINT('',(180.67022128432,-49.3788710461,1.585)); +#242913 = DIRECTION('',(0.,0.,-1.)); +#242914 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#242915 = ORIENTED_EDGE('',*,*,#242916,.T.); +#242916 = EDGE_CURVE('',#242908,#242917,#242919,.T.); +#242917 = VERTEX_POINT('',#242918); +#242918 = CARTESIAN_POINT('',(180.838272,-49.072919,1.585)); +#242919 = LINE('',#242920,#242921); +#242920 = CARTESIAN_POINT('',(180.613778,-49.329483,1.585)); +#242921 = VECTOR('',#242922,1.); +#242922 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#242923 = ORIENTED_EDGE('',*,*,#242924,.T.); +#242924 = EDGE_CURVE('',#242917,#242747,#242925,.T.); +#242925 = LINE('',#242926,#242927); +#242926 = CARTESIAN_POINT('',(180.838272,-49.072919,1.585)); +#242927 = VECTOR('',#242928,1.); +#242928 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#242929 = PLANE('',#242930); +#242930 = AXIS2_PLACEMENT_3D('',#242931,#242932,#242933); +#242931 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242932 = DIRECTION('',(0.,0.,1.)); +#242933 = DIRECTION('',(1.,0.,-0.)); +#242934 = SHELL_BASED_SURFACE_MODEL('',(#242935)); +#242935 = OPEN_SHELL('',(#242936)); +#242936 = ADVANCED_FACE('',(#242937),#243080,.T.); +#242937 = FACE_BOUND('',#242938,.F.); +#242938 = EDGE_LOOP('',(#242939,#242949,#242957,#242965,#242974,#242982, + #242990,#242999,#243007,#243015,#243024,#243032,#243040,#243049, + #243057,#243066,#243074)); +#242939 = ORIENTED_EDGE('',*,*,#242940,.T.); +#242940 = EDGE_CURVE('',#242941,#242943,#242945,.T.); +#242941 = VERTEX_POINT('',#242942); +#242942 = CARTESIAN_POINT('',(210.289335,-48.670572,1.585)); +#242943 = VERTEX_POINT('',#242944); +#242944 = CARTESIAN_POINT('',(210.312175,-48.649656,1.585)); +#242945 = LINE('',#242946,#242947); +#242946 = CARTESIAN_POINT('',(210.289335,-48.670572,1.585)); +#242947 = VECTOR('',#242948,1.); +#242948 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#242949 = ORIENTED_EDGE('',*,*,#242950,.T.); +#242950 = EDGE_CURVE('',#242943,#242951,#242953,.T.); +#242951 = VERTEX_POINT('',#242952); +#242952 = CARTESIAN_POINT('',(210.341282,-48.639071,1.585)); +#242953 = LINE('',#242954,#242955); +#242954 = CARTESIAN_POINT('',(210.312175,-48.649656,1.585)); +#242955 = VECTOR('',#242956,1.); +#242956 = DIRECTION('',(0.939786824446,0.341761209907,0.)); +#242957 = ORIENTED_EDGE('',*,*,#242958,.T.); +#242958 = EDGE_CURVE('',#242951,#242959,#242961,.T.); +#242959 = VERTEX_POINT('',#242960); +#242960 = CARTESIAN_POINT('',(210.355046,-48.639676,1.585)); +#242961 = LINE('',#242962,#242963); +#242962 = CARTESIAN_POINT('',(210.341282,-48.639071,1.585)); +#242963 = VECTOR('',#242964,1.); +#242964 = DIRECTION('',(0.99903536577,-4.391284483375E-02,0.)); +#242965 = ORIENTED_EDGE('',*,*,#242966,.T.); +#242966 = EDGE_CURVE('',#242959,#242967,#242969,.T.); +#242967 = VERTEX_POINT('',#242968); +#242968 = CARTESIAN_POINT('',(210.425908,-48.689307,1.585)); +#242969 = CIRCLE('',#242970,7.786403695721E-02); +#242970 = AXIS2_PLACEMENT_3D('',#242971,#242972,#242973); +#242971 = CARTESIAN_POINT('',(210.3533355224,-48.71752124723,1.585)); +#242972 = DIRECTION('',(0.,0.,-1.)); +#242973 = DIRECTION('',(2.196749179824E-02,0.999758685536,0.)); +#242974 = ORIENTED_EDGE('',*,*,#242975,.T.); +#242975 = EDGE_CURVE('',#242967,#242976,#242978,.T.); +#242976 = VERTEX_POINT('',#242977); +#242977 = CARTESIAN_POINT('',(210.432708,-48.717526,1.585)); +#242978 = LINE('',#242979,#242980); +#242979 = CARTESIAN_POINT('',(210.425908,-48.689307,1.585)); +#242980 = VECTOR('',#242981,1.); +#242981 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#242982 = ORIENTED_EDGE('',*,*,#242983,.T.); +#242983 = EDGE_CURVE('',#242976,#242984,#242986,.T.); +#242984 = VERTEX_POINT('',#242985); +#242985 = CARTESIAN_POINT('',(210.431183,-50.003011,1.585)); +#242986 = LINE('',#242987,#242988); +#242987 = CARTESIAN_POINT('',(210.432708,-48.717526,1.585)); +#242988 = VECTOR('',#242989,1.); +#242989 = DIRECTION('',(-1.186321837186E-03,-0.99999929632,0.)); +#242990 = ORIENTED_EDGE('',*,*,#242991,.T.); +#242991 = EDGE_CURVE('',#242984,#242992,#242994,.T.); +#242992 = VERTEX_POINT('',#242993); +#242993 = CARTESIAN_POINT('',(210.275483,-50.003011,1.585)); +#242994 = CIRCLE('',#242995,7.937510771646E-02); +#242995 = AXIS2_PLACEMENT_3D('',#242996,#242997,#242998); +#242996 = CARTESIAN_POINT('',(210.353333,-49.987526,1.585)); +#242997 = DIRECTION('',(-0.,0.,-1.)); +#242998 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#242999 = ORIENTED_EDGE('',*,*,#243000,.T.); +#243000 = EDGE_CURVE('',#242992,#243001,#243003,.T.); +#243001 = VERTEX_POINT('',#243002); +#243002 = CARTESIAN_POINT('',(210.273958,-49.075314,1.585)); +#243003 = LINE('',#243004,#243005); +#243004 = CARTESIAN_POINT('',(210.275483,-50.003011,1.585)); +#243005 = VECTOR('',#243006,1.); +#243006 = DIRECTION('',(-1.643853477531E-03,0.999998648872,0.)); +#243007 = ORIENTED_EDGE('',*,*,#243008,.T.); +#243008 = EDGE_CURVE('',#243001,#243009,#243011,.T.); +#243009 = VERTEX_POINT('',#243010); +#243010 = CARTESIAN_POINT('',(209.993998,-49.671623,1.585)); +#243011 = LINE('',#243012,#243013); +#243012 = CARTESIAN_POINT('',(210.273958,-49.075314,1.585)); +#243013 = VECTOR('',#243014,1.); +#243014 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#243015 = ORIENTED_EDGE('',*,*,#243016,.T.); +#243016 = EDGE_CURVE('',#243009,#243017,#243019,.T.); +#243017 = VERTEX_POINT('',#243018); +#243018 = CARTESIAN_POINT('',(209.858072,-49.658235,1.585)); +#243019 = CIRCLE('',#243020,7.937464557819E-02); +#243020 = AXIS2_PLACEMENT_3D('',#243021,#243022,#243023); +#243021 = CARTESIAN_POINT('',(209.93000035502,-49.62466945063,1.585)); +#243022 = DIRECTION('',(-0.,0.,-1.)); +#243023 = DIRECTION('',(0.806273143147,-0.591543420756,-0.)); +#243024 = ORIENTED_EDGE('',*,*,#243025,.T.); +#243025 = EDGE_CURVE('',#243017,#243026,#243028,.T.); +#243026 = VERTEX_POINT('',#243027); +#243027 = CARTESIAN_POINT('',(209.586041,-49.075312,1.585)); +#243028 = LINE('',#243029,#243030); +#243029 = CARTESIAN_POINT('',(209.858072,-49.658235,1.585)); +#243030 = VECTOR('',#243031,1.); +#243031 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#243032 = ORIENTED_EDGE('',*,*,#243033,.T.); +#243033 = EDGE_CURVE('',#243026,#243034,#243036,.T.); +#243034 = VERTEX_POINT('',#243035); +#243035 = CARTESIAN_POINT('',(209.584516,-50.003011,1.585)); +#243036 = LINE('',#243037,#243038); +#243037 = CARTESIAN_POINT('',(209.586041,-49.075312,1.585)); +#243038 = VECTOR('',#243039,1.); +#243039 = DIRECTION('',(-1.643849933573E-03,-0.999998648878,0.)); +#243040 = ORIENTED_EDGE('',*,*,#243041,.T.); +#243041 = EDGE_CURVE('',#243034,#243042,#243044,.T.); +#243042 = VERTEX_POINT('',#243043); +#243043 = CARTESIAN_POINT('',(209.428816,-50.003011,1.585)); +#243044 = CIRCLE('',#243045,7.937510771646E-02); +#243045 = AXIS2_PLACEMENT_3D('',#243046,#243047,#243048); +#243046 = CARTESIAN_POINT('',(209.506666,-49.987526,1.585)); +#243047 = DIRECTION('',(-0.,0.,-1.)); +#243048 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#243049 = ORIENTED_EDGE('',*,*,#243050,.T.); +#243050 = EDGE_CURVE('',#243042,#243051,#243053,.T.); +#243051 = VERTEX_POINT('',#243052); +#243052 = CARTESIAN_POINT('',(209.428816,-48.702041,1.585)); +#243053 = LINE('',#243054,#243055); +#243054 = CARTESIAN_POINT('',(209.428816,-50.003011,1.585)); +#243055 = VECTOR('',#243056,1.); +#243056 = DIRECTION('',(0.,1.,0.)); +#243057 = ORIENTED_EDGE('',*,*,#243058,.T.); +#243058 = EDGE_CURVE('',#243051,#243059,#243061,.T.); +#243059 = VERTEX_POINT('',#243060); +#243060 = CARTESIAN_POINT('',(209.578594,-48.683959,1.585)); +#243061 = CIRCLE('',#243062,7.937498694708E-02); +#243062 = AXIS2_PLACEMENT_3D('',#243063,#243064,#243065); +#243063 = CARTESIAN_POINT('',(209.50666589729,-48.71752589729,1.585)); +#243064 = DIRECTION('',(0.,0.,-1.)); +#243065 = DIRECTION('',(-0.980786268925,0.195085352318,0.)); +#243066 = ORIENTED_EDGE('',*,*,#243067,.T.); +#243067 = EDGE_CURVE('',#243059,#243068,#243070,.T.); +#243068 = VERTEX_POINT('',#243069); +#243069 = CARTESIAN_POINT('',(209.929999,-49.43697,1.585)); +#243070 = LINE('',#243071,#243072); +#243071 = CARTESIAN_POINT('',(209.578594,-48.683959,1.585)); +#243072 = VECTOR('',#243073,1.); +#243073 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#243074 = ORIENTED_EDGE('',*,*,#243075,.T.); +#243075 = EDGE_CURVE('',#243068,#242941,#243076,.T.); +#243076 = LINE('',#243077,#243078); +#243077 = CARTESIAN_POINT('',(209.929999,-49.43697,1.585)); +#243078 = VECTOR('',#243079,1.); +#243079 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#243080 = PLANE('',#243081); +#243081 = AXIS2_PLACEMENT_3D('',#243082,#243083,#243084); +#243082 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243083 = DIRECTION('',(0.,0.,1.)); +#243084 = DIRECTION('',(1.,0.,-0.)); +#243085 = SHELL_BASED_SURFACE_MODEL('',(#243086)); +#243086 = OPEN_SHELL('',(#243087)); +#243087 = ADVANCED_FACE('',(#243088),#243206,.T.); +#243088 = FACE_BOUND('',#243089,.F.); +#243089 = EDGE_LOOP('',(#243090,#243101,#243109,#243117,#243125,#243134, + #243142,#243151,#243159,#243167,#243175,#243184,#243192,#243200)); +#243090 = ORIENTED_EDGE('',*,*,#243091,.T.); +#243091 = EDGE_CURVE('',#243092,#243094,#243096,.T.); +#243092 = VERTEX_POINT('',#243093); +#243093 = CARTESIAN_POINT('',(210.913997,-48.651528,1.585)); +#243094 = VERTEX_POINT('',#243095); +#243095 = CARTESIAN_POINT('',(211.035945,-48.702041,1.585)); +#243096 = CIRCLE('',#243097,7.937518132317E-02); +#243097 = AXIS2_PLACEMENT_3D('',#243098,#243099,#243100); +#243098 = CARTESIAN_POINT('',(210.958095,-48.71752637729,1.585)); +#243099 = DIRECTION('',(0.,0.,-1.)); +#243100 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#243101 = ORIENTED_EDGE('',*,*,#243102,.T.); +#243102 = EDGE_CURVE('',#243094,#243103,#243105,.T.); +#243103 = VERTEX_POINT('',#243104); +#243104 = CARTESIAN_POINT('',(211.03747,-49.242913,1.585)); +#243105 = LINE('',#243106,#243107); +#243106 = CARTESIAN_POINT('',(211.035945,-48.702041,1.585)); +#243107 = VECTOR('',#243108,1.); +#243108 = DIRECTION('',(2.819509862603E-03,-0.999996025174,0.)); +#243109 = ORIENTED_EDGE('',*,*,#243110,.T.); +#243110 = EDGE_CURVE('',#243103,#243111,#243113,.T.); +#243111 = VERTEX_POINT('',#243112); +#243112 = CARTESIAN_POINT('',(211.604435,-49.242913,1.585)); +#243113 = LINE('',#243114,#243115); +#243114 = CARTESIAN_POINT('',(211.03747,-49.242913,1.585)); +#243115 = VECTOR('',#243116,1.); +#243116 = DIRECTION('',(1.,0.,0.)); +#243117 = ORIENTED_EDGE('',*,*,#243118,.T.); +#243118 = EDGE_CURVE('',#243111,#243119,#243121,.T.); +#243119 = VERTEX_POINT('',#243120); +#243120 = CARTESIAN_POINT('',(211.60596,-48.702041,1.585)); +#243121 = LINE('',#243122,#243123); +#243122 = CARTESIAN_POINT('',(211.604435,-49.242913,1.585)); +#243123 = VECTOR('',#243124,1.); +#243124 = DIRECTION('',(2.819509862603E-03,0.999996025174,0.)); +#243125 = ORIENTED_EDGE('',*,*,#243126,.T.); +#243126 = EDGE_CURVE('',#243119,#243127,#243129,.T.); +#243127 = VERTEX_POINT('',#243128); +#243128 = CARTESIAN_POINT('',(211.76166,-48.702041,1.585)); +#243129 = CIRCLE('',#243130,7.937510771646E-02); +#243130 = AXIS2_PLACEMENT_3D('',#243131,#243132,#243133); +#243131 = CARTESIAN_POINT('',(211.68381,-48.717526,1.585)); +#243132 = DIRECTION('',(0.,0.,-1.)); +#243133 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#243134 = ORIENTED_EDGE('',*,*,#243135,.T.); +#243135 = EDGE_CURVE('',#243127,#243136,#243138,.T.); +#243136 = VERTEX_POINT('',#243137); +#243137 = CARTESIAN_POINT('',(211.76166,-50.003011,1.585)); +#243138 = LINE('',#243139,#243140); +#243139 = CARTESIAN_POINT('',(211.76166,-48.702041,1.585)); +#243140 = VECTOR('',#243141,1.); +#243141 = DIRECTION('',(0.,-1.,0.)); +#243142 = ORIENTED_EDGE('',*,*,#243143,.T.); +#243143 = EDGE_CURVE('',#243136,#243144,#243146,.T.); +#243144 = VERTEX_POINT('',#243145); +#243145 = CARTESIAN_POINT('',(211.60596,-50.003011,1.585)); +#243146 = CIRCLE('',#243147,7.937510771646E-02); +#243147 = AXIS2_PLACEMENT_3D('',#243148,#243149,#243150); +#243148 = CARTESIAN_POINT('',(211.68381,-49.987526,1.585)); +#243149 = DIRECTION('',(-0.,0.,-1.)); +#243150 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#243151 = ORIENTED_EDGE('',*,*,#243152,.T.); +#243152 = EDGE_CURVE('',#243144,#243153,#243155,.T.); +#243153 = VERTEX_POINT('',#243154); +#243154 = CARTESIAN_POINT('',(211.604435,-49.401663,1.585)); +#243155 = LINE('',#243156,#243157); +#243156 = CARTESIAN_POINT('',(211.60596,-50.003011,1.585)); +#243157 = VECTOR('',#243158,1.); +#243158 = DIRECTION('',(-2.5359610347E-03,0.999996784446,0.)); +#243159 = ORIENTED_EDGE('',*,*,#243160,.T.); +#243160 = EDGE_CURVE('',#243153,#243161,#243163,.T.); +#243161 = VERTEX_POINT('',#243162); +#243162 = CARTESIAN_POINT('',(211.03747,-49.401663,1.585)); +#243163 = LINE('',#243164,#243165); +#243164 = CARTESIAN_POINT('',(211.604435,-49.401663,1.585)); +#243165 = VECTOR('',#243166,1.); +#243166 = DIRECTION('',(-1.,0.,0.)); +#243167 = ORIENTED_EDGE('',*,*,#243168,.T.); +#243168 = EDGE_CURVE('',#243161,#243169,#243171,.T.); +#243169 = VERTEX_POINT('',#243170); +#243170 = CARTESIAN_POINT('',(211.035945,-50.003011,1.585)); +#243171 = LINE('',#243172,#243173); +#243172 = CARTESIAN_POINT('',(211.03747,-49.401663,1.585)); +#243173 = VECTOR('',#243174,1.); +#243174 = DIRECTION('',(-2.5359610347E-03,-0.999996784446,0.)); +#243175 = ORIENTED_EDGE('',*,*,#243176,.T.); +#243176 = EDGE_CURVE('',#243169,#243177,#243179,.T.); +#243177 = VERTEX_POINT('',#243178); +#243178 = CARTESIAN_POINT('',(210.880245,-50.003011,1.585)); +#243179 = CIRCLE('',#243180,7.937510771646E-02); +#243180 = AXIS2_PLACEMENT_3D('',#243181,#243182,#243183); +#243181 = CARTESIAN_POINT('',(210.958095,-49.987526,1.585)); +#243182 = DIRECTION('',(-0.,0.,-1.)); +#243183 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#243184 = ORIENTED_EDGE('',*,*,#243185,.T.); +#243185 = EDGE_CURVE('',#243177,#243186,#243188,.T.); +#243186 = VERTEX_POINT('',#243187); +#243187 = CARTESIAN_POINT('',(210.880245,-48.702041,1.585)); +#243188 = LINE('',#243189,#243190); +#243189 = CARTESIAN_POINT('',(210.880245,-50.003011,1.585)); +#243190 = VECTOR('',#243191,1.); +#243191 = DIRECTION('',(0.,1.,0.)); +#243192 = ORIENTED_EDGE('',*,*,#243193,.T.); +#243193 = EDGE_CURVE('',#243186,#243194,#243196,.T.); +#243194 = VERTEX_POINT('',#243195); +#243195 = CARTESIAN_POINT('',(210.892097,-48.673428,1.585)); +#243196 = LINE('',#243197,#243198); +#243197 = CARTESIAN_POINT('',(210.880245,-48.702041,1.585)); +#243198 = VECTOR('',#243199,1.); +#243199 = DIRECTION('',(0.382686390668,0.923878307137,0.)); +#243200 = ORIENTED_EDGE('',*,*,#243201,.T.); +#243201 = EDGE_CURVE('',#243194,#243092,#243202,.T.); +#243202 = LINE('',#243203,#243204); +#243203 = CARTESIAN_POINT('',(210.892097,-48.673428,1.585)); +#243204 = VECTOR('',#243205,1.); +#243205 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#243206 = PLANE('',#243207); +#243207 = AXIS2_PLACEMENT_3D('',#243208,#243209,#243210); +#243208 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243209 = DIRECTION('',(0.,0.,1.)); +#243210 = DIRECTION('',(1.,0.,-0.)); +#243211 = SHELL_BASED_SURFACE_MODEL('',(#243212)); +#243212 = OPEN_SHELL('',(#243213)); +#243213 = ADVANCED_FACE('',(#243214),#243373,.T.); +#243214 = FACE_BOUND('',#243215,.F.); +#243215 = EDGE_LOOP('',(#243216,#243227,#243235,#243243,#243251,#243259, + #243267,#243275,#243284,#243292,#243301,#243309,#243317,#243325, + #243334,#243342,#243350,#243358,#243367)); +#243216 = ORIENTED_EDGE('',*,*,#243217,.T.); +#243217 = EDGE_CURVE('',#243218,#243220,#243222,.T.); +#243218 = VERTEX_POINT('',#243219); +#243219 = CARTESIAN_POINT('',(212.246411,-48.7112,1.585)); +#243220 = VERTEX_POINT('',#243221); +#243221 = CARTESIAN_POINT('',(212.882891,-48.716875,1.585)); +#243222 = CIRCLE('',#243223,0.556795040199); +#243223 = AXIS2_PLACEMENT_3D('',#243224,#243225,#243226); +#243224 = CARTESIAN_POINT('',(212.56057754908,-49.17089565608,1.585)); +#243225 = DIRECTION('',(0.,0.,-1.)); +#243226 = DIRECTION('',(-0.564240926027,0.825610184891,0.)); +#243227 = ORIENTED_EDGE('',*,*,#243228,.T.); +#243228 = EDGE_CURVE('',#243220,#243229,#243231,.T.); +#243229 = VERTEX_POINT('',#243230); +#243230 = CARTESIAN_POINT('',(212.960133,-48.796316,1.585)); +#243231 = LINE('',#243232,#243233); +#243232 = CARTESIAN_POINT('',(212.882891,-48.716875,1.585)); +#243233 = VECTOR('',#243234,1.); +#243234 = DIRECTION('',(0.697114091734,-0.716960210267,0.)); +#243235 = ORIENTED_EDGE('',*,*,#243236,.T.); +#243236 = EDGE_CURVE('',#243229,#243237,#243239,.T.); +#243237 = VERTEX_POINT('',#243238); +#243238 = CARTESIAN_POINT('',(213.03166,-48.943945,1.585)); +#243239 = LINE('',#243240,#243241); +#243240 = CARTESIAN_POINT('',(212.960133,-48.796316,1.585)); +#243241 = VECTOR('',#243242,1.); +#243242 = DIRECTION('',(0.436023266637,-0.899935392654,0.)); +#243243 = ORIENTED_EDGE('',*,*,#243244,.T.); +#243244 = EDGE_CURVE('',#243237,#243245,#243247,.T.); +#243245 = VERTEX_POINT('',#243246); +#243246 = CARTESIAN_POINT('',(213.030858,-49.097802,1.585)); +#243247 = LINE('',#243248,#243249); +#243248 = CARTESIAN_POINT('',(213.03166,-48.943945,1.585)); +#243249 = VECTOR('',#243250,1.); +#243250 = DIRECTION('',(-5.212561693186E-03,-0.999986414508,0.)); +#243251 = ORIENTED_EDGE('',*,*,#243252,.T.); +#243252 = EDGE_CURVE('',#243245,#243253,#243255,.T.); +#243253 = VERTEX_POINT('',#243254); +#243254 = CARTESIAN_POINT('',(212.959331,-49.30591,1.585)); +#243255 = LINE('',#243256,#243257); +#243256 = CARTESIAN_POINT('',(213.030858,-49.097802,1.585)); +#243257 = VECTOR('',#243258,1.); +#243258 = DIRECTION('',(-0.325038619661,-0.945700743221,0.)); +#243259 = ORIENTED_EDGE('',*,*,#243260,.T.); +#243260 = EDGE_CURVE('',#243253,#243261,#243263,.T.); +#243261 = VERTEX_POINT('',#243262); +#243262 = CARTESIAN_POINT('',(212.359248,-49.908151,1.585)); +#243263 = LINE('',#243264,#243265); +#243264 = CARTESIAN_POINT('',(212.959331,-49.30591,1.585)); +#243265 = VECTOR('',#243266,1.); +#243266 = DIRECTION('',(-0.705836488494,-0.708374795931,0.)); +#243267 = ORIENTED_EDGE('',*,*,#243268,.T.); +#243268 = EDGE_CURVE('',#243261,#243269,#243271,.T.); +#243269 = VERTEX_POINT('',#243270); +#243270 = CARTESIAN_POINT('',(212.969295,-49.909676,1.585)); +#243271 = LINE('',#243272,#243273); +#243272 = CARTESIAN_POINT('',(212.359248,-49.908151,1.585)); +#243273 = VECTOR('',#243274,1.); +#243274 = DIRECTION('',(0.999996875496,-2.499799581233E-03,0.)); +#243275 = ORIENTED_EDGE('',*,*,#243276,.T.); +#243276 = EDGE_CURVE('',#243269,#243277,#243279,.T.); +#243277 = VERTEX_POINT('',#243278); +#243278 = CARTESIAN_POINT('',(212.969295,-50.065376,1.585)); +#243279 = CIRCLE('',#243280,7.937510771647E-02); +#243280 = AXIS2_PLACEMENT_3D('',#243281,#243282,#243283); +#243281 = CARTESIAN_POINT('',(212.95381,-49.987526,1.585)); +#243282 = DIRECTION('',(0.,0.,-1.)); +#243283 = DIRECTION('',(0.19508634943,0.980786070591,0.)); +#243284 = ORIENTED_EDGE('',*,*,#243285,.T.); +#243285 = EDGE_CURVE('',#243277,#243286,#243288,.T.); +#243286 = VERTEX_POINT('',#243287); +#243287 = CARTESIAN_POINT('',(212.152133,-50.065376,1.585)); +#243288 = LINE('',#243289,#243290); +#243289 = CARTESIAN_POINT('',(212.969295,-50.065376,1.585)); +#243290 = VECTOR('',#243291,1.); +#243291 = DIRECTION('',(-1.,0.,0.)); +#243292 = ORIENTED_EDGE('',*,*,#243293,.T.); +#243293 = EDGE_CURVE('',#243286,#243294,#243296,.T.); +#243294 = VERTEX_POINT('',#243295); +#243295 = CARTESIAN_POINT('',(212.101621,-49.943427,1.585)); +#243296 = CIRCLE('',#243297,7.93752659056E-02); +#243297 = AXIS2_PLACEMENT_3D('',#243298,#243299,#243300); +#243298 = CARTESIAN_POINT('',(212.16761881084,-49.987526,1.585)); +#243299 = DIRECTION('',(0.,0.,-1.)); +#243300 = DIRECTION('',(-0.195096175997,-0.980784115956,-0.)); +#243301 = ORIENTED_EDGE('',*,*,#243302,.T.); +#243302 = EDGE_CURVE('',#243294,#243303,#243305,.T.); +#243303 = VERTEX_POINT('',#243304); +#243304 = CARTESIAN_POINT('',(212.823956,-49.218934,1.585)); +#243305 = LINE('',#243306,#243307); +#243306 = CARTESIAN_POINT('',(212.101621,-49.943427,1.585)); +#243307 = VECTOR('',#243308,1.); +#243308 = DIRECTION('',(0.706051318664,0.70816067062,0.)); +#243309 = ORIENTED_EDGE('',*,*,#243310,.T.); +#243310 = EDGE_CURVE('',#243303,#243311,#243313,.T.); +#243311 = VERTEX_POINT('',#243312); +#243312 = CARTESIAN_POINT('',(212.874435,-49.0675,1.585)); +#243313 = LINE('',#243314,#243315); +#243314 = CARTESIAN_POINT('',(212.823956,-49.218934,1.585)); +#243315 = VECTOR('',#243316,1.); +#243316 = DIRECTION('',(0.316233404199,0.948681418638,0.)); +#243317 = ORIENTED_EDGE('',*,*,#243318,.T.); +#243318 = EDGE_CURVE('',#243311,#243319,#243321,.T.); +#243319 = VERTEX_POINT('',#243320); +#243320 = CARTESIAN_POINT('',(212.874435,-48.978168,1.585)); +#243321 = LINE('',#243322,#243323); +#243322 = CARTESIAN_POINT('',(212.874435,-49.0675,1.585)); +#243323 = VECTOR('',#243324,1.); +#243324 = DIRECTION('',(0.,1.,0.)); +#243325 = ORIENTED_EDGE('',*,*,#243326,.T.); +#243326 = EDGE_CURVE('',#243319,#243327,#243329,.T.); +#243327 = VERTEX_POINT('',#243328); +#243328 = CARTESIAN_POINT('',(212.693167,-48.796901,1.585)); +#243329 = CIRCLE('',#243330,0.255230246246); +#243330 = AXIS2_PLACEMENT_3D('',#243331,#243332,#243333); +#243331 = CARTESIAN_POINT('',(212.62773489768,-49.04360146328,1.585)); +#243332 = DIRECTION('',(0.,0.,1.)); +#243333 = DIRECTION('',(0.966578632201,0.256370333254,-0.)); +#243334 = ORIENTED_EDGE('',*,*,#243335,.T.); +#243335 = EDGE_CURVE('',#243327,#243336,#243338,.T.); +#243336 = VERTEX_POINT('',#243337); +#243337 = CARTESIAN_POINT('',(212.428261,-48.796901,1.585)); +#243338 = LINE('',#243339,#243340); +#243339 = CARTESIAN_POINT('',(212.693167,-48.796901,1.585)); +#243340 = VECTOR('',#243341,1.); +#243341 = DIRECTION('',(-1.,0.,0.)); +#243342 = ORIENTED_EDGE('',*,*,#243343,.T.); +#243343 = EDGE_CURVE('',#243336,#243344,#243346,.T.); +#243344 = VERTEX_POINT('',#243345); +#243345 = CARTESIAN_POINT('',(212.335591,-48.843235,1.585)); +#243346 = LINE('',#243347,#243348); +#243347 = CARTESIAN_POINT('',(212.428261,-48.796901,1.585)); +#243348 = VECTOR('',#243349,1.); +#243349 = DIRECTION('',(-0.894431051681,-0.447205874054,0.)); +#243350 = ORIENTED_EDGE('',*,*,#243351,.T.); +#243351 = EDGE_CURVE('',#243344,#243352,#243354,.T.); +#243352 = VERTEX_POINT('',#243353); +#243353 = CARTESIAN_POINT('',(212.272194,-48.904476,1.585)); +#243354 = LINE('',#243355,#243356); +#243355 = CARTESIAN_POINT('',(212.335591,-48.843235,1.585)); +#243356 = VECTOR('',#243357,1.); +#243357 = DIRECTION('',(-0.719230784119,-0.694771242334,0.)); +#243358 = ORIENTED_EDGE('',*,*,#243359,.T.); +#243359 = EDGE_CURVE('',#243352,#243360,#243362,.T.); +#243360 = VERTEX_POINT('',#243361); +#243361 = CARTESIAN_POINT('',(212.162097,-48.794379,1.585)); +#243362 = CIRCLE('',#243363,7.937542317998E-02); +#243363 = AXIS2_PLACEMENT_3D('',#243364,#243365,#243366); +#243364 = CARTESIAN_POINT('',(212.228095,-48.838478,1.585)); +#243365 = DIRECTION('',(0.,0.,-1.)); +#243366 = DIRECTION('',(0.555574990763,-0.83146643326,0.)); +#243367 = ORIENTED_EDGE('',*,*,#243368,.T.); +#243368 = EDGE_CURVE('',#243360,#243218,#243369,.T.); +#243369 = LINE('',#243370,#243371); +#243370 = CARTESIAN_POINT('',(212.162097,-48.794379,1.585)); +#243371 = VECTOR('',#243372,1.); +#243372 = DIRECTION('',(0.71188207692,0.702299016488,0.)); +#243373 = PLANE('',#243374); +#243374 = AXIS2_PLACEMENT_3D('',#243375,#243376,#243377); +#243375 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243376 = DIRECTION('',(0.,0.,1.)); +#243377 = DIRECTION('',(1.,0.,-0.)); +#243378 = SHELL_BASED_SURFACE_MODEL('',(#243379)); +#243379 = OPEN_SHELL('',(#243380)); +#243380 = ADVANCED_FACE('',(#243381),#243517,.T.); +#243381 = FACE_BOUND('',#243382,.F.); +#243382 = EDGE_LOOP('',(#243383,#243393,#243402,#243410,#243419,#243427, + #243435,#243444,#243452,#243460,#243469,#243477,#243486,#243494, + #243502,#243511)); +#243383 = ORIENTED_EDGE('',*,*,#243384,.T.); +#243384 = EDGE_CURVE('',#243385,#243387,#243389,.T.); +#243385 = VERTEX_POINT('',#243386); +#243386 = CARTESIAN_POINT('',(177.800028,-49.537039,1.585)); +#243387 = VERTEX_POINT('',#243388); +#243388 = CARTESIAN_POINT('',(177.798806,-49.761957,1.585)); +#243389 = LINE('',#243390,#243391); +#243390 = CARTESIAN_POINT('',(177.800028,-49.537039,1.585)); +#243391 = VECTOR('',#243392,1.); +#243392 = DIRECTION('',(-5.433010984414E-03,-0.999985241087,0.)); +#243393 = ORIENTED_EDGE('',*,*,#243394,.T.); +#243394 = EDGE_CURVE('',#243387,#243395,#243397,.T.); +#243395 = VERTEX_POINT('',#243396); +#243396 = CARTESIAN_POINT('',(177.550624,-50.006182,1.585)); +#243397 = CIRCLE('',#243398,0.348632713765); +#243398 = AXIS2_PLACEMENT_3D('',#243399,#243400,#243401); +#243399 = CARTESIAN_POINT('',(177.46285597394,-49.66877787627,1.585)); +#243400 = DIRECTION('',(0.,0.,-1.)); +#243401 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#243402 = ORIENTED_EDGE('',*,*,#243403,.T.); +#243403 = EDGE_CURVE('',#243395,#243404,#243406,.T.); +#243404 = VERTEX_POINT('',#243405); +#243405 = CARTESIAN_POINT('',(177.230468,-50.00496,1.585)); +#243406 = LINE('',#243407,#243408); +#243407 = CARTESIAN_POINT('',(177.550624,-50.006182,1.585)); +#243408 = VECTOR('',#243409,1.); +#243409 = DIRECTION('',(-0.999992715758,3.816861463354E-03,0.)); +#243410 = ORIENTED_EDGE('',*,*,#243411,.T.); +#243411 = EDGE_CURVE('',#243404,#243412,#243414,.T.); +#243412 = VERTEX_POINT('',#243413); +#243413 = CARTESIAN_POINT('',(176.986243,-49.756779,1.585)); +#243414 = CIRCLE('',#243415,0.348628078749); +#243415 = AXIS2_PLACEMENT_3D('',#243416,#243417,#243418); +#243416 = CARTESIAN_POINT('',(177.3236430302,-49.66901364857,1.585)); +#243417 = DIRECTION('',(0.,0.,-1.)); +#243418 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#243419 = ORIENTED_EDGE('',*,*,#243420,.T.); +#243420 = EDGE_CURVE('',#243412,#243421,#243423,.T.); +#243421 = VERTEX_POINT('',#243422); +#243422 = CARTESIAN_POINT('',(176.987465,-49.531862,1.585)); +#243423 = LINE('',#243424,#243425); +#243424 = CARTESIAN_POINT('',(176.986243,-49.756779,1.585)); +#243425 = VECTOR('',#243426,1.); +#243426 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#243427 = ORIENTED_EDGE('',*,*,#243428,.T.); +#243428 = EDGE_CURVE('',#243421,#243429,#243431,.T.); +#243429 = VERTEX_POINT('',#243430); +#243430 = CARTESIAN_POINT('',(177.048171,-49.410449,1.585)); +#243431 = LINE('',#243432,#243433); +#243432 = CARTESIAN_POINT('',(176.987465,-49.531862,1.585)); +#243433 = VECTOR('',#243434,1.); +#243434 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#243435 = ORIENTED_EDGE('',*,*,#243436,.T.); +#243436 = EDGE_CURVE('',#243429,#243437,#243439,.T.); +#243437 = VERTEX_POINT('',#243438); +#243438 = CARTESIAN_POINT('',(177.174503,-49.489974,1.585)); +#243439 = CIRCLE('',#243440,7.500029440362E-02); +#243440 = AXIS2_PLACEMENT_3D('',#243441,#243442,#243443); +#243441 = CARTESIAN_POINT('',(177.10742064867,-49.45643294602,1.585)); +#243442 = DIRECTION('',(0.,0.,-1.)); +#243443 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#243444 = ORIENTED_EDGE('',*,*,#243445,.T.); +#243445 = EDGE_CURVE('',#243437,#243446,#243448,.T.); +#243446 = VERTEX_POINT('',#243447); +#243447 = CARTESIAN_POINT('',(177.134802,-49.569376,1.585)); +#243448 = LINE('',#243449,#243450); +#243449 = CARTESIAN_POINT('',(177.174503,-49.489974,1.585)); +#243450 = VECTOR('',#243451,1.); +#243451 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#243452 = ORIENTED_EDGE('',*,*,#243453,.T.); +#243453 = EDGE_CURVE('',#243446,#243454,#243456,.T.); +#243454 = VERTEX_POINT('',#243455); +#243455 = CARTESIAN_POINT('',(177.134802,-49.724442,1.585)); +#243456 = LINE('',#243457,#243458); +#243457 = CARTESIAN_POINT('',(177.134802,-49.569376,1.585)); +#243458 = VECTOR('',#243459,1.); +#243459 = DIRECTION('',(0.,-1.,0.)); +#243460 = ORIENTED_EDGE('',*,*,#243461,.T.); +#243461 = EDGE_CURVE('',#243454,#243462,#243464,.T.); +#243462 = VERTEX_POINT('',#243463); +#243463 = CARTESIAN_POINT('',(177.267983,-49.857623,1.585)); +#243464 = CIRCLE('',#243465,0.18686440374); +#243465 = AXIS2_PLACEMENT_3D('',#243466,#243467,#243468); +#243466 = CARTESIAN_POINT('',(177.315519,-49.676906,1.585)); +#243467 = DIRECTION('',(0.,0.,1.)); +#243468 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#243469 = ORIENTED_EDGE('',*,*,#243470,.T.); +#243470 = EDGE_CURVE('',#243462,#243471,#243473,.T.); +#243471 = VERTEX_POINT('',#243472); +#243472 = CARTESIAN_POINT('',(177.518287,-49.857623,1.585)); +#243473 = LINE('',#243474,#243475); +#243474 = CARTESIAN_POINT('',(177.267983,-49.857623,1.585)); +#243475 = VECTOR('',#243476,1.); +#243476 = DIRECTION('',(1.,0.,0.)); +#243477 = ORIENTED_EDGE('',*,*,#243478,.T.); +#243478 = EDGE_CURVE('',#243471,#243479,#243481,.T.); +#243479 = VERTEX_POINT('',#243480); +#243480 = CARTESIAN_POINT('',(177.651469,-49.724442,1.585)); +#243481 = CIRCLE('',#243482,0.186872595955); +#243482 = AXIS2_PLACEMENT_3D('',#243483,#243484,#243485); +#243483 = CARTESIAN_POINT('',(177.47074536766,-49.67689901068,1.585)); +#243484 = DIRECTION('',(0.,0.,1.)); +#243485 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#243486 = ORIENTED_EDGE('',*,*,#243487,.T.); +#243487 = EDGE_CURVE('',#243479,#243488,#243490,.T.); +#243488 = VERTEX_POINT('',#243489); +#243489 = CARTESIAN_POINT('',(177.651469,-49.569376,1.585)); +#243490 = LINE('',#243491,#243492); +#243491 = CARTESIAN_POINT('',(177.651469,-49.724442,1.585)); +#243492 = VECTOR('',#243493,1.); +#243493 = DIRECTION('',(0.,1.,0.)); +#243494 = ORIENTED_EDGE('',*,*,#243495,.T.); +#243495 = EDGE_CURVE('',#243488,#243496,#243498,.T.); +#243496 = VERTEX_POINT('',#243497); +#243497 = CARTESIAN_POINT('',(177.606513,-49.476242,1.585)); +#243498 = LINE('',#243499,#243500); +#243499 = CARTESIAN_POINT('',(177.651469,-49.569376,1.585)); +#243500 = VECTOR('',#243501,1.); +#243501 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#243502 = ORIENTED_EDGE('',*,*,#243503,.T.); +#243503 = EDGE_CURVE('',#243496,#243504,#243506,.T.); +#243504 = VERTEX_POINT('',#243505); +#243505 = CARTESIAN_POINT('',(177.745932,-49.422892,1.585)); +#243506 = CIRCLE('',#243507,7.500016685596E-02); +#243507 = AXIS2_PLACEMENT_3D('',#243508,#243509,#243510); +#243508 = CARTESIAN_POINT('',(177.6788500864,-49.45643364422,1.585)); +#243509 = DIRECTION('',(0.,0.,-1.)); +#243510 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#243511 = ORIENTED_EDGE('',*,*,#243512,.T.); +#243512 = EDGE_CURVE('',#243504,#243385,#243513,.T.); +#243513 = LINE('',#243514,#243515); +#243514 = CARTESIAN_POINT('',(177.745932,-49.422892,1.585)); +#243515 = VECTOR('',#243516,1.); +#243516 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#243517 = PLANE('',#243518); +#243518 = AXIS2_PLACEMENT_3D('',#243519,#243520,#243521); +#243519 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243520 = DIRECTION('',(0.,0.,1.)); +#243521 = DIRECTION('',(1.,0.,-0.)); +#243522 = SHELL_BASED_SURFACE_MODEL('',(#243523)); +#243523 = OPEN_SHELL('',(#243524)); +#243524 = ADVANCED_FACE('',(#243525,#243595,#243679,#243863,#243897, + #243931),#243965,.T.); +#243525 = FACE_BOUND('',#243526,.F.); +#243526 = EDGE_LOOP('',(#243527,#243538,#243546,#243555,#243563,#243572, + #243580,#243589)); +#243527 = ORIENTED_EDGE('',*,*,#243528,.T.); +#243528 = EDGE_CURVE('',#243529,#243531,#243533,.T.); +#243529 = VERTEX_POINT('',#243530); +#243530 = CARTESIAN_POINT('',(95.57165,-43.8631,1.585)); +#243531 = VERTEX_POINT('',#243532); +#243532 = CARTESIAN_POINT('',(95.63165,-43.8031,1.585)); +#243533 = CIRCLE('',#243534,5.999932016257E-02); +#243534 = AXIS2_PLACEMENT_3D('',#243535,#243536,#243537); +#243535 = CARTESIAN_POINT('',(95.631649320159,-43.86309932015,1.585)); +#243536 = DIRECTION('',(0.,0.,-1.)); +#243537 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#243538 = ORIENTED_EDGE('',*,*,#243539,.T.); +#243539 = EDGE_CURVE('',#243531,#243540,#243542,.T.); +#243540 = VERTEX_POINT('',#243541); +#243541 = CARTESIAN_POINT('',(108.25165,-43.8031,1.585)); +#243542 = LINE('',#243543,#243544); +#243543 = CARTESIAN_POINT('',(95.63165,-43.8031,1.585)); +#243544 = VECTOR('',#243545,1.); +#243545 = DIRECTION('',(1.,0.,0.)); +#243546 = ORIENTED_EDGE('',*,*,#243547,.T.); +#243547 = EDGE_CURVE('',#243540,#243548,#243550,.T.); +#243548 = VERTEX_POINT('',#243549); +#243549 = CARTESIAN_POINT('',(108.31165,-43.8631,1.585)); +#243550 = CIRCLE('',#243551,5.999932016262E-02); +#243551 = AXIS2_PLACEMENT_3D('',#243552,#243553,#243554); +#243552 = CARTESIAN_POINT('',(108.25165067984,-43.86309932015,1.585)); +#243553 = DIRECTION('',(0.,0.,-1.)); +#243554 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#243555 = ORIENTED_EDGE('',*,*,#243556,.T.); +#243556 = EDGE_CURVE('',#243548,#243557,#243559,.T.); +#243557 = VERTEX_POINT('',#243558); +#243558 = CARTESIAN_POINT('',(108.31165,-49.8331,1.585)); +#243559 = LINE('',#243560,#243561); +#243560 = CARTESIAN_POINT('',(108.31165,-43.8631,1.585)); +#243561 = VECTOR('',#243562,1.); +#243562 = DIRECTION('',(0.,-1.,0.)); +#243563 = ORIENTED_EDGE('',*,*,#243564,.T.); +#243564 = EDGE_CURVE('',#243557,#243565,#243567,.T.); +#243565 = VERTEX_POINT('',#243566); +#243566 = CARTESIAN_POINT('',(108.25165,-49.8931,1.585)); +#243567 = CIRCLE('',#243568,5.999932016258E-02); +#243568 = AXIS2_PLACEMENT_3D('',#243569,#243570,#243571); +#243569 = CARTESIAN_POINT('',(108.25165067984,-49.83310067984,1.585)); +#243570 = DIRECTION('',(0.,0.,-1.)); +#243571 = DIRECTION('',(0.999999999936,1.133081612143E-05,0.)); +#243572 = ORIENTED_EDGE('',*,*,#243573,.T.); +#243573 = EDGE_CURVE('',#243565,#243574,#243576,.T.); +#243574 = VERTEX_POINT('',#243575); +#243575 = CARTESIAN_POINT('',(95.63165,-49.8931,1.585)); +#243576 = LINE('',#243577,#243578); +#243577 = CARTESIAN_POINT('',(108.25165,-49.8931,1.585)); +#243578 = VECTOR('',#243579,1.); +#243579 = DIRECTION('',(-1.,0.,0.)); +#243580 = ORIENTED_EDGE('',*,*,#243581,.T.); +#243581 = EDGE_CURVE('',#243574,#243582,#243584,.T.); +#243582 = VERTEX_POINT('',#243583); +#243583 = CARTESIAN_POINT('',(95.57165,-49.8331,1.585)); +#243584 = CIRCLE('',#243585,5.999932016258E-02); +#243585 = AXIS2_PLACEMENT_3D('',#243586,#243587,#243588); +#243586 = CARTESIAN_POINT('',(95.631649320159,-49.83310067984,1.585)); +#243587 = DIRECTION('',(0.,0.,-1.)); +#243588 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#243589 = ORIENTED_EDGE('',*,*,#243590,.T.); +#243590 = EDGE_CURVE('',#243582,#243529,#243591,.T.); +#243591 = LINE('',#243592,#243593); +#243592 = CARTESIAN_POINT('',(95.57165,-49.8331,1.585)); +#243593 = VECTOR('',#243594,1.); +#243594 = DIRECTION('',(0.,1.,0.)); +#243595 = FACE_BOUND('',#243596,.F.); +#243596 = EDGE_LOOP('',(#243597,#243608,#243616,#243624,#243632,#243640, + #243648,#243656,#243664,#243673)); +#243597 = ORIENTED_EDGE('',*,*,#243598,.T.); +#243598 = EDGE_CURVE('',#243599,#243601,#243603,.T.); +#243599 = VERTEX_POINT('',#243600); +#243600 = CARTESIAN_POINT('',(96.39165,-49.1331,1.585)); +#243601 = VERTEX_POINT('',#243602); +#243602 = CARTESIAN_POINT('',(96.33165,-49.0731,1.585)); +#243603 = CIRCLE('',#243604,5.999932016261E-02); +#243604 = AXIS2_PLACEMENT_3D('',#243605,#243606,#243607); +#243605 = CARTESIAN_POINT('',(96.391649320159,-49.07310067984,1.585)); +#243606 = DIRECTION('',(0.,0.,-1.)); +#243607 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#243608 = ORIENTED_EDGE('',*,*,#243609,.T.); +#243609 = EDGE_CURVE('',#243601,#243610,#243612,.T.); +#243610 = VERTEX_POINT('',#243611); +#243611 = CARTESIAN_POINT('',(96.33165,-46.1831,1.585)); +#243612 = LINE('',#243613,#243614); +#243613 = CARTESIAN_POINT('',(96.33165,-49.0731,1.585)); +#243614 = VECTOR('',#243615,1.); +#243615 = DIRECTION('',(0.,1.,0.)); +#243616 = ORIENTED_EDGE('',*,*,#243617,.T.); +#243617 = EDGE_CURVE('',#243610,#243618,#243620,.T.); +#243618 = VERTEX_POINT('',#243619); +#243619 = CARTESIAN_POINT('',(95.69165,-46.1831,1.585)); +#243620 = LINE('',#243621,#243622); +#243621 = CARTESIAN_POINT('',(96.33165,-46.1831,1.585)); +#243622 = VECTOR('',#243623,1.); +#243623 = DIRECTION('',(-1.,0.,0.)); +#243624 = ORIENTED_EDGE('',*,*,#243625,.T.); +#243625 = EDGE_CURVE('',#243618,#243626,#243628,.T.); +#243626 = VERTEX_POINT('',#243627); +#243627 = CARTESIAN_POINT('',(95.69165,-49.7731,1.585)); +#243628 = LINE('',#243629,#243630); +#243629 = CARTESIAN_POINT('',(95.69165,-46.1831,1.585)); +#243630 = VECTOR('',#243631,1.); +#243631 = DIRECTION('',(0.,-1.,0.)); +#243632 = ORIENTED_EDGE('',*,*,#243633,.T.); +#243633 = EDGE_CURVE('',#243626,#243634,#243636,.T.); +#243634 = VERTEX_POINT('',#243635); +#243635 = CARTESIAN_POINT('',(108.19165,-49.7731,1.585)); +#243636 = LINE('',#243637,#243638); +#243637 = CARTESIAN_POINT('',(95.69165,-49.7731,1.585)); +#243638 = VECTOR('',#243639,1.); +#243639 = DIRECTION('',(1.,0.,0.)); +#243640 = ORIENTED_EDGE('',*,*,#243641,.T.); +#243641 = EDGE_CURVE('',#243634,#243642,#243644,.T.); +#243642 = VERTEX_POINT('',#243643); +#243643 = CARTESIAN_POINT('',(108.19165,-46.1831,1.585)); +#243644 = LINE('',#243645,#243646); +#243645 = CARTESIAN_POINT('',(108.19165,-49.7731,1.585)); +#243646 = VECTOR('',#243647,1.); +#243647 = DIRECTION('',(0.,1.,0.)); +#243648 = ORIENTED_EDGE('',*,*,#243649,.T.); +#243649 = EDGE_CURVE('',#243642,#243650,#243652,.T.); +#243650 = VERTEX_POINT('',#243651); +#243651 = CARTESIAN_POINT('',(107.55165,-46.1831,1.585)); +#243652 = LINE('',#243653,#243654); +#243653 = CARTESIAN_POINT('',(108.19165,-46.1831,1.585)); +#243654 = VECTOR('',#243655,1.); +#243655 = DIRECTION('',(-1.,0.,0.)); +#243656 = ORIENTED_EDGE('',*,*,#243657,.T.); +#243657 = EDGE_CURVE('',#243650,#243658,#243660,.T.); +#243658 = VERTEX_POINT('',#243659); +#243659 = CARTESIAN_POINT('',(107.55165,-49.0731,1.585)); +#243660 = LINE('',#243661,#243662); +#243661 = CARTESIAN_POINT('',(107.55165,-46.1831,1.585)); +#243662 = VECTOR('',#243663,1.); +#243663 = DIRECTION('',(0.,-1.,0.)); +#243664 = ORIENTED_EDGE('',*,*,#243665,.T.); +#243665 = EDGE_CURVE('',#243658,#243666,#243668,.T.); +#243666 = VERTEX_POINT('',#243667); +#243667 = CARTESIAN_POINT('',(107.49165,-49.1331,1.585)); +#243668 = CIRCLE('',#243669,5.999932016257E-02); +#243669 = AXIS2_PLACEMENT_3D('',#243670,#243671,#243672); +#243670 = CARTESIAN_POINT('',(107.49165067984,-49.07310067984,1.585)); +#243671 = DIRECTION('',(0.,0.,-1.)); +#243672 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#243673 = ORIENTED_EDGE('',*,*,#243674,.T.); +#243674 = EDGE_CURVE('',#243666,#243599,#243675,.T.); +#243675 = LINE('',#243676,#243677); +#243676 = CARTESIAN_POINT('',(107.49165,-49.1331,1.585)); +#243677 = VECTOR('',#243678,1.); +#243678 = DIRECTION('',(-1.,0.,0.)); +#243679 = FACE_BOUND('',#243680,.F.); +#243680 = EDGE_LOOP('',(#243681,#243692,#243700,#243708,#243716,#243725, + #243733,#243741,#243749,#243758,#243766,#243774,#243782,#243791, + #243799,#243807,#243815,#243824,#243832,#243840,#243848,#243857)); +#243681 = ORIENTED_EDGE('',*,*,#243682,.T.); +#243682 = EDGE_CURVE('',#243683,#243685,#243687,.T.); +#243683 = VERTEX_POINT('',#243684); +#243684 = CARTESIAN_POINT('',(98.94165,-44.6831,1.585)); +#243685 = VERTEX_POINT('',#243686); +#243686 = CARTESIAN_POINT('',(98.88165,-44.6231,1.585)); +#243687 = CIRCLE('',#243688,5.999932016261E-02); +#243688 = AXIS2_PLACEMENT_3D('',#243689,#243690,#243691); +#243689 = CARTESIAN_POINT('',(98.941649320159,-44.62310067984,1.585)); +#243690 = DIRECTION('',(0.,0.,-1.)); +#243691 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#243692 = ORIENTED_EDGE('',*,*,#243693,.T.); +#243693 = EDGE_CURVE('',#243685,#243694,#243696,.T.); +#243694 = VERTEX_POINT('',#243695); +#243695 = CARTESIAN_POINT('',(98.88165,-43.9231,1.585)); +#243696 = LINE('',#243697,#243698); +#243697 = CARTESIAN_POINT('',(98.88165,-44.6231,1.585)); +#243698 = VECTOR('',#243699,1.); +#243699 = DIRECTION('',(0.,1.,0.)); +#243700 = ORIENTED_EDGE('',*,*,#243701,.T.); +#243701 = EDGE_CURVE('',#243694,#243702,#243704,.T.); +#243702 = VERTEX_POINT('',#243703); +#243703 = CARTESIAN_POINT('',(97.50165,-43.9231,1.585)); +#243704 = LINE('',#243705,#243706); +#243705 = CARTESIAN_POINT('',(98.88165,-43.9231,1.585)); +#243706 = VECTOR('',#243707,1.); +#243707 = DIRECTION('',(-1.,0.,0.)); +#243708 = ORIENTED_EDGE('',*,*,#243709,.T.); +#243709 = EDGE_CURVE('',#243702,#243710,#243712,.T.); +#243710 = VERTEX_POINT('',#243711); +#243711 = CARTESIAN_POINT('',(97.50165,-44.6231,1.585)); +#243712 = LINE('',#243713,#243714); +#243713 = CARTESIAN_POINT('',(97.50165,-43.9231,1.585)); +#243714 = VECTOR('',#243715,1.); +#243715 = DIRECTION('',(0.,-1.,0.)); +#243716 = ORIENTED_EDGE('',*,*,#243717,.T.); +#243717 = EDGE_CURVE('',#243710,#243718,#243720,.T.); +#243718 = VERTEX_POINT('',#243719); +#243719 = CARTESIAN_POINT('',(97.44165,-44.6831,1.585)); +#243720 = CIRCLE('',#243721,5.999932016258E-02); +#243721 = AXIS2_PLACEMENT_3D('',#243722,#243723,#243724); +#243722 = CARTESIAN_POINT('',(97.441650679841,-44.62310067984,1.585)); +#243723 = DIRECTION('',(0.,0.,-1.)); +#243724 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#243725 = ORIENTED_EDGE('',*,*,#243726,.T.); +#243726 = EDGE_CURVE('',#243718,#243727,#243729,.T.); +#243727 = VERTEX_POINT('',#243728); +#243728 = CARTESIAN_POINT('',(95.69165,-44.6831,1.585)); +#243729 = LINE('',#243730,#243731); +#243730 = CARTESIAN_POINT('',(97.44165,-44.6831,1.585)); +#243731 = VECTOR('',#243732,1.); +#243732 = DIRECTION('',(-1.,0.,0.)); +#243733 = ORIENTED_EDGE('',*,*,#243734,.T.); +#243734 = EDGE_CURVE('',#243727,#243735,#243737,.T.); +#243735 = VERTEX_POINT('',#243736); +#243736 = CARTESIAN_POINT('',(95.69165,-46.0631,1.585)); +#243737 = LINE('',#243738,#243739); +#243738 = CARTESIAN_POINT('',(95.69165,-44.6831,1.585)); +#243739 = VECTOR('',#243740,1.); +#243740 = DIRECTION('',(0.,-1.,0.)); +#243741 = ORIENTED_EDGE('',*,*,#243742,.T.); +#243742 = EDGE_CURVE('',#243735,#243743,#243745,.T.); +#243743 = VERTEX_POINT('',#243744); +#243744 = CARTESIAN_POINT('',(96.39165,-46.0631,1.585)); +#243745 = LINE('',#243746,#243747); +#243746 = CARTESIAN_POINT('',(95.69165,-46.0631,1.585)); +#243747 = VECTOR('',#243748,1.); +#243748 = DIRECTION('',(1.,0.,0.)); +#243749 = ORIENTED_EDGE('',*,*,#243750,.T.); +#243750 = EDGE_CURVE('',#243743,#243751,#243753,.T.); +#243751 = VERTEX_POINT('',#243752); +#243752 = CARTESIAN_POINT('',(96.45165,-46.1231,1.585)); +#243753 = CIRCLE('',#243754,5.999932016261E-02); +#243754 = AXIS2_PLACEMENT_3D('',#243755,#243756,#243757); +#243755 = CARTESIAN_POINT('',(96.391650679841,-46.12309932015,1.585)); +#243756 = DIRECTION('',(0.,0.,-1.)); +#243757 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#243758 = ORIENTED_EDGE('',*,*,#243759,.T.); +#243759 = EDGE_CURVE('',#243751,#243760,#243762,.T.); +#243760 = VERTEX_POINT('',#243761); +#243761 = CARTESIAN_POINT('',(96.45165,-49.0131,1.585)); +#243762 = LINE('',#243763,#243764); +#243763 = CARTESIAN_POINT('',(96.45165,-46.1231,1.585)); +#243764 = VECTOR('',#243765,1.); +#243765 = DIRECTION('',(0.,-1.,0.)); +#243766 = ORIENTED_EDGE('',*,*,#243767,.T.); +#243767 = EDGE_CURVE('',#243760,#243768,#243770,.T.); +#243768 = VERTEX_POINT('',#243769); +#243769 = CARTESIAN_POINT('',(107.43165,-49.0131,1.585)); +#243770 = LINE('',#243771,#243772); +#243771 = CARTESIAN_POINT('',(96.45165,-49.0131,1.585)); +#243772 = VECTOR('',#243773,1.); +#243773 = DIRECTION('',(1.,0.,0.)); +#243774 = ORIENTED_EDGE('',*,*,#243775,.T.); +#243775 = EDGE_CURVE('',#243768,#243776,#243778,.T.); +#243776 = VERTEX_POINT('',#243777); +#243777 = CARTESIAN_POINT('',(107.43165,-46.1231,1.585)); +#243778 = LINE('',#243779,#243780); +#243779 = CARTESIAN_POINT('',(107.43165,-49.0131,1.585)); +#243780 = VECTOR('',#243781,1.); +#243781 = DIRECTION('',(0.,1.,0.)); +#243782 = ORIENTED_EDGE('',*,*,#243783,.T.); +#243783 = EDGE_CURVE('',#243776,#243784,#243786,.T.); +#243784 = VERTEX_POINT('',#243785); +#243785 = CARTESIAN_POINT('',(107.49165,-46.0631,1.585)); +#243786 = CIRCLE('',#243787,5.999932016258E-02); +#243787 = AXIS2_PLACEMENT_3D('',#243788,#243789,#243790); +#243788 = CARTESIAN_POINT('',(107.49164932015,-46.12309932015,1.585)); +#243789 = DIRECTION('',(0.,0.,-1.)); +#243790 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#243791 = ORIENTED_EDGE('',*,*,#243792,.T.); +#243792 = EDGE_CURVE('',#243784,#243793,#243795,.T.); +#243793 = VERTEX_POINT('',#243794); +#243794 = CARTESIAN_POINT('',(108.19165,-46.0631,1.585)); +#243795 = LINE('',#243796,#243797); +#243796 = CARTESIAN_POINT('',(107.49165,-46.0631,1.585)); +#243797 = VECTOR('',#243798,1.); +#243798 = DIRECTION('',(1.,0.,0.)); +#243799 = ORIENTED_EDGE('',*,*,#243800,.T.); +#243800 = EDGE_CURVE('',#243793,#243801,#243803,.T.); +#243801 = VERTEX_POINT('',#243802); +#243802 = CARTESIAN_POINT('',(108.19165,-44.6831,1.585)); +#243803 = LINE('',#243804,#243805); +#243804 = CARTESIAN_POINT('',(108.19165,-46.0631,1.585)); +#243805 = VECTOR('',#243806,1.); +#243806 = DIRECTION('',(0.,1.,0.)); +#243807 = ORIENTED_EDGE('',*,*,#243808,.T.); +#243808 = EDGE_CURVE('',#243801,#243809,#243811,.T.); +#243809 = VERTEX_POINT('',#243810); +#243810 = CARTESIAN_POINT('',(106.44165,-44.6831,1.585)); +#243811 = LINE('',#243812,#243813); +#243812 = CARTESIAN_POINT('',(108.19165,-44.6831,1.585)); +#243813 = VECTOR('',#243814,1.); +#243814 = DIRECTION('',(-1.,0.,0.)); +#243815 = ORIENTED_EDGE('',*,*,#243816,.T.); +#243816 = EDGE_CURVE('',#243809,#243817,#243819,.T.); +#243817 = VERTEX_POINT('',#243818); +#243818 = CARTESIAN_POINT('',(106.38165,-44.6231,1.585)); +#243819 = CIRCLE('',#243820,5.999932016261E-02); +#243820 = AXIS2_PLACEMENT_3D('',#243821,#243822,#243823); +#243821 = CARTESIAN_POINT('',(106.44164932015,-44.62310067984,1.585)); +#243822 = DIRECTION('',(0.,0.,-1.)); +#243823 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#243824 = ORIENTED_EDGE('',*,*,#243825,.T.); +#243825 = EDGE_CURVE('',#243817,#243826,#243828,.T.); +#243826 = VERTEX_POINT('',#243827); +#243827 = CARTESIAN_POINT('',(106.38165,-43.9231,1.585)); +#243828 = LINE('',#243829,#243830); +#243829 = CARTESIAN_POINT('',(106.38165,-44.6231,1.585)); +#243830 = VECTOR('',#243831,1.); +#243831 = DIRECTION('',(0.,1.,0.)); +#243832 = ORIENTED_EDGE('',*,*,#243833,.T.); +#243833 = EDGE_CURVE('',#243826,#243834,#243836,.T.); +#243834 = VERTEX_POINT('',#243835); +#243835 = CARTESIAN_POINT('',(105.00165,-43.9231,1.585)); +#243836 = LINE('',#243837,#243838); +#243837 = CARTESIAN_POINT('',(106.38165,-43.9231,1.585)); +#243838 = VECTOR('',#243839,1.); +#243839 = DIRECTION('',(-1.,0.,0.)); +#243840 = ORIENTED_EDGE('',*,*,#243841,.T.); +#243841 = EDGE_CURVE('',#243834,#243842,#243844,.T.); +#243842 = VERTEX_POINT('',#243843); +#243843 = CARTESIAN_POINT('',(105.00165,-44.6231,1.585)); +#243844 = LINE('',#243845,#243846); +#243845 = CARTESIAN_POINT('',(105.00165,-43.9231,1.585)); +#243846 = VECTOR('',#243847,1.); +#243847 = DIRECTION('',(0.,-1.,0.)); +#243848 = ORIENTED_EDGE('',*,*,#243849,.T.); +#243849 = EDGE_CURVE('',#243842,#243850,#243852,.T.); +#243850 = VERTEX_POINT('',#243851); +#243851 = CARTESIAN_POINT('',(104.94165,-44.6831,1.585)); +#243852 = CIRCLE('',#243853,5.999932016258E-02); +#243853 = AXIS2_PLACEMENT_3D('',#243854,#243855,#243856); +#243854 = CARTESIAN_POINT('',(104.94165067984,-44.62310067984,1.585)); +#243855 = DIRECTION('',(0.,0.,-1.)); +#243856 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#243857 = ORIENTED_EDGE('',*,*,#243858,.T.); +#243858 = EDGE_CURVE('',#243850,#243683,#243859,.T.); +#243859 = LINE('',#243860,#243861); +#243860 = CARTESIAN_POINT('',(104.94165,-44.6831,1.585)); +#243861 = VECTOR('',#243862,1.); +#243862 = DIRECTION('',(-1.,0.,0.)); +#243863 = FACE_BOUND('',#243864,.F.); +#243864 = EDGE_LOOP('',(#243865,#243875,#243883,#243891)); +#243865 = ORIENTED_EDGE('',*,*,#243866,.T.); +#243866 = EDGE_CURVE('',#243867,#243869,#243871,.T.); +#243867 = VERTEX_POINT('',#243868); +#243868 = CARTESIAN_POINT('',(97.38165,-44.5631,1.585)); +#243869 = VERTEX_POINT('',#243870); +#243870 = CARTESIAN_POINT('',(97.38165,-43.9331,1.585)); +#243871 = LINE('',#243872,#243873); +#243872 = CARTESIAN_POINT('',(97.38165,-44.5631,1.585)); +#243873 = VECTOR('',#243874,1.); +#243874 = DIRECTION('',(0.,1.,0.)); +#243875 = ORIENTED_EDGE('',*,*,#243876,.T.); +#243876 = EDGE_CURVE('',#243869,#243877,#243879,.T.); +#243877 = VERTEX_POINT('',#243878); +#243878 = CARTESIAN_POINT('',(95.70165,-43.9331,1.585)); +#243879 = LINE('',#243880,#243881); +#243880 = CARTESIAN_POINT('',(97.38165,-43.9331,1.585)); +#243881 = VECTOR('',#243882,1.); +#243882 = DIRECTION('',(-1.,0.,0.)); +#243883 = ORIENTED_EDGE('',*,*,#243884,.T.); +#243884 = EDGE_CURVE('',#243877,#243885,#243887,.T.); +#243885 = VERTEX_POINT('',#243886); +#243886 = CARTESIAN_POINT('',(95.70165,-44.5631,1.585)); +#243887 = LINE('',#243888,#243889); +#243888 = CARTESIAN_POINT('',(95.70165,-43.9331,1.585)); +#243889 = VECTOR('',#243890,1.); +#243890 = DIRECTION('',(0.,-1.,0.)); +#243891 = ORIENTED_EDGE('',*,*,#243892,.T.); +#243892 = EDGE_CURVE('',#243885,#243867,#243893,.T.); +#243893 = LINE('',#243894,#243895); +#243894 = CARTESIAN_POINT('',(95.70165,-44.5631,1.585)); +#243895 = VECTOR('',#243896,1.); +#243896 = DIRECTION('',(1.,0.,0.)); +#243897 = FACE_BOUND('',#243898,.F.); +#243898 = EDGE_LOOP('',(#243899,#243909,#243917,#243925)); +#243899 = ORIENTED_EDGE('',*,*,#243900,.T.); +#243900 = EDGE_CURVE('',#243901,#243903,#243905,.T.); +#243901 = VERTEX_POINT('',#243902); +#243902 = CARTESIAN_POINT('',(104.88165,-44.5631,1.585)); +#243903 = VERTEX_POINT('',#243904); +#243904 = CARTESIAN_POINT('',(104.88165,-43.9331,1.585)); +#243905 = LINE('',#243906,#243907); +#243906 = CARTESIAN_POINT('',(104.88165,-44.5631,1.585)); +#243907 = VECTOR('',#243908,1.); +#243908 = DIRECTION('',(0.,1.,0.)); +#243909 = ORIENTED_EDGE('',*,*,#243910,.T.); +#243910 = EDGE_CURVE('',#243903,#243911,#243913,.T.); +#243911 = VERTEX_POINT('',#243912); +#243912 = CARTESIAN_POINT('',(99.00165,-43.9331,1.585)); +#243913 = LINE('',#243914,#243915); +#243914 = CARTESIAN_POINT('',(104.88165,-43.9331,1.585)); +#243915 = VECTOR('',#243916,1.); +#243916 = DIRECTION('',(-1.,0.,0.)); +#243917 = ORIENTED_EDGE('',*,*,#243918,.T.); +#243918 = EDGE_CURVE('',#243911,#243919,#243921,.T.); +#243919 = VERTEX_POINT('',#243920); +#243920 = CARTESIAN_POINT('',(99.00165,-44.5631,1.585)); +#243921 = LINE('',#243922,#243923); +#243922 = CARTESIAN_POINT('',(99.00165,-43.9331,1.585)); +#243923 = VECTOR('',#243924,1.); +#243924 = DIRECTION('',(0.,-1.,0.)); +#243925 = ORIENTED_EDGE('',*,*,#243926,.T.); +#243926 = EDGE_CURVE('',#243919,#243901,#243927,.T.); +#243927 = LINE('',#243928,#243929); +#243928 = CARTESIAN_POINT('',(99.00165,-44.5631,1.585)); +#243929 = VECTOR('',#243930,1.); +#243930 = DIRECTION('',(1.,0.,0.)); +#243931 = FACE_BOUND('',#243932,.F.); +#243932 = EDGE_LOOP('',(#243933,#243943,#243951,#243959)); +#243933 = ORIENTED_EDGE('',*,*,#243934,.T.); +#243934 = EDGE_CURVE('',#243935,#243937,#243939,.T.); +#243935 = VERTEX_POINT('',#243936); +#243936 = CARTESIAN_POINT('',(108.18165,-44.5631,1.585)); +#243937 = VERTEX_POINT('',#243938); +#243938 = CARTESIAN_POINT('',(108.18165,-43.9331,1.585)); +#243939 = LINE('',#243940,#243941); +#243940 = CARTESIAN_POINT('',(108.18165,-44.5631,1.585)); +#243941 = VECTOR('',#243942,1.); +#243942 = DIRECTION('',(0.,1.,0.)); +#243943 = ORIENTED_EDGE('',*,*,#243944,.T.); +#243944 = EDGE_CURVE('',#243937,#243945,#243947,.T.); +#243945 = VERTEX_POINT('',#243946); +#243946 = CARTESIAN_POINT('',(106.50165,-43.9331,1.585)); +#243947 = LINE('',#243948,#243949); +#243948 = CARTESIAN_POINT('',(108.18165,-43.9331,1.585)); +#243949 = VECTOR('',#243950,1.); +#243950 = DIRECTION('',(-1.,0.,0.)); +#243951 = ORIENTED_EDGE('',*,*,#243952,.T.); +#243952 = EDGE_CURVE('',#243945,#243953,#243955,.T.); +#243953 = VERTEX_POINT('',#243954); +#243954 = CARTESIAN_POINT('',(106.50165,-44.5631,1.585)); +#243955 = LINE('',#243956,#243957); +#243956 = CARTESIAN_POINT('',(106.50165,-43.9331,1.585)); +#243957 = VECTOR('',#243958,1.); +#243958 = DIRECTION('',(0.,-1.,0.)); +#243959 = ORIENTED_EDGE('',*,*,#243960,.T.); +#243960 = EDGE_CURVE('',#243953,#243935,#243961,.T.); +#243961 = LINE('',#243962,#243963); +#243962 = CARTESIAN_POINT('',(106.50165,-44.5631,1.585)); +#243963 = VECTOR('',#243964,1.); +#243964 = DIRECTION('',(1.,0.,0.)); +#243965 = PLANE('',#243966); +#243966 = AXIS2_PLACEMENT_3D('',#243967,#243968,#243969); +#243967 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243968 = DIRECTION('',(0.,0.,1.)); +#243969 = DIRECTION('',(1.,0.,-0.)); +#243970 = SHELL_BASED_SURFACE_MODEL('',(#243971)); +#243971 = OPEN_SHELL('',(#243972)); +#243972 = ADVANCED_FACE('',(#243973,#244043,#244160,#244344,#244378, + #244412),#244446,.T.); +#243973 = FACE_BOUND('',#243974,.F.); +#243974 = EDGE_LOOP('',(#243975,#243986,#243994,#244003,#244011,#244020, + #244028,#244037)); +#243975 = ORIENTED_EDGE('',*,*,#243976,.T.); +#243976 = EDGE_CURVE('',#243977,#243979,#243981,.T.); +#243977 = VERTEX_POINT('',#243978); +#243978 = CARTESIAN_POINT('',(113.57165,-43.8631,1.585)); +#243979 = VERTEX_POINT('',#243980); +#243980 = CARTESIAN_POINT('',(113.63165,-43.8031,1.585)); +#243981 = CIRCLE('',#243982,5.999932016257E-02); +#243982 = AXIS2_PLACEMENT_3D('',#243983,#243984,#243985); +#243983 = CARTESIAN_POINT('',(113.63164932015,-43.86309932015,1.585)); +#243984 = DIRECTION('',(0.,0.,-1.)); +#243985 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#243986 = ORIENTED_EDGE('',*,*,#243987,.T.); +#243987 = EDGE_CURVE('',#243979,#243988,#243990,.T.); +#243988 = VERTEX_POINT('',#243989); +#243989 = CARTESIAN_POINT('',(123.75165,-43.8031,1.585)); +#243990 = LINE('',#243991,#243992); +#243991 = CARTESIAN_POINT('',(113.63165,-43.8031,1.585)); +#243992 = VECTOR('',#243993,1.); +#243993 = DIRECTION('',(1.,0.,0.)); +#243994 = ORIENTED_EDGE('',*,*,#243995,.T.); +#243995 = EDGE_CURVE('',#243988,#243996,#243998,.T.); +#243996 = VERTEX_POINT('',#243997); +#243997 = CARTESIAN_POINT('',(123.81165,-43.8631,1.585)); +#243998 = CIRCLE('',#243999,5.999932016262E-02); +#243999 = AXIS2_PLACEMENT_3D('',#244000,#244001,#244002); +#244000 = CARTESIAN_POINT('',(123.75165067984,-43.86309932015,1.585)); +#244001 = DIRECTION('',(0.,0.,-1.)); +#244002 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#244003 = ORIENTED_EDGE('',*,*,#244004,.T.); +#244004 = EDGE_CURVE('',#243996,#244005,#244007,.T.); +#244005 = VERTEX_POINT('',#244006); +#244006 = CARTESIAN_POINT('',(123.81165,-49.8331,1.585)); +#244007 = LINE('',#244008,#244009); +#244008 = CARTESIAN_POINT('',(123.81165,-43.8631,1.585)); +#244009 = VECTOR('',#244010,1.); +#244010 = DIRECTION('',(0.,-1.,0.)); +#244011 = ORIENTED_EDGE('',*,*,#244012,.T.); +#244012 = EDGE_CURVE('',#244005,#244013,#244015,.T.); +#244013 = VERTEX_POINT('',#244014); +#244014 = CARTESIAN_POINT('',(123.75165,-49.8931,1.585)); +#244015 = CIRCLE('',#244016,5.999932016258E-02); +#244016 = AXIS2_PLACEMENT_3D('',#244017,#244018,#244019); +#244017 = CARTESIAN_POINT('',(123.75165067984,-49.83310067984,1.585)); +#244018 = DIRECTION('',(0.,0.,-1.)); +#244019 = DIRECTION('',(0.999999999936,1.133081612143E-05,0.)); +#244020 = ORIENTED_EDGE('',*,*,#244021,.T.); +#244021 = EDGE_CURVE('',#244013,#244022,#244024,.T.); +#244022 = VERTEX_POINT('',#244023); +#244023 = CARTESIAN_POINT('',(113.63165,-49.8931,1.585)); +#244024 = LINE('',#244025,#244026); +#244025 = CARTESIAN_POINT('',(123.75165,-49.8931,1.585)); +#244026 = VECTOR('',#244027,1.); +#244027 = DIRECTION('',(-1.,0.,0.)); +#244028 = ORIENTED_EDGE('',*,*,#244029,.T.); +#244029 = EDGE_CURVE('',#244022,#244030,#244032,.T.); +#244030 = VERTEX_POINT('',#244031); +#244031 = CARTESIAN_POINT('',(113.57165,-49.8331,1.585)); +#244032 = CIRCLE('',#244033,5.999932016258E-02); +#244033 = AXIS2_PLACEMENT_3D('',#244034,#244035,#244036); +#244034 = CARTESIAN_POINT('',(113.63164932015,-49.83310067984,1.585)); +#244035 = DIRECTION('',(0.,0.,-1.)); +#244036 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#244037 = ORIENTED_EDGE('',*,*,#244038,.T.); +#244038 = EDGE_CURVE('',#244030,#243977,#244039,.T.); +#244039 = LINE('',#244040,#244041); +#244040 = CARTESIAN_POINT('',(113.57165,-49.8331,1.585)); +#244041 = VECTOR('',#244042,1.); +#244042 = DIRECTION('',(0.,1.,0.)); +#244043 = FACE_BOUND('',#244044,.F.); +#244044 = EDGE_LOOP('',(#244045,#244056,#244064,#244072,#244080,#244088, + #244096,#244104,#244113,#244121,#244129,#244137,#244145,#244154)); +#244045 = ORIENTED_EDGE('',*,*,#244046,.T.); +#244046 = EDGE_CURVE('',#244047,#244049,#244051,.T.); +#244047 = VERTEX_POINT('',#244048); +#244048 = CARTESIAN_POINT('',(114.39165,-49.1331,1.585)); +#244049 = VERTEX_POINT('',#244050); +#244050 = CARTESIAN_POINT('',(114.33165,-49.0731,1.585)); +#244051 = CIRCLE('',#244052,5.999932016261E-02); +#244052 = AXIS2_PLACEMENT_3D('',#244053,#244054,#244055); +#244053 = CARTESIAN_POINT('',(114.39164932015,-49.07310067984,1.585)); +#244054 = DIRECTION('',(0.,0.,-1.)); +#244055 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#244056 = ORIENTED_EDGE('',*,*,#244057,.T.); +#244057 = EDGE_CURVE('',#244049,#244058,#244060,.T.); +#244058 = VERTEX_POINT('',#244059); +#244059 = CARTESIAN_POINT('',(114.33165,-46.1831,1.585)); +#244060 = LINE('',#244061,#244062); +#244061 = CARTESIAN_POINT('',(114.33165,-49.0731,1.585)); +#244062 = VECTOR('',#244063,1.); +#244063 = DIRECTION('',(0.,1.,0.)); +#244064 = ORIENTED_EDGE('',*,*,#244065,.T.); +#244065 = EDGE_CURVE('',#244058,#244066,#244068,.T.); +#244066 = VERTEX_POINT('',#244067); +#244067 = CARTESIAN_POINT('',(113.69165,-46.1831,1.585)); +#244068 = LINE('',#244069,#244070); +#244069 = CARTESIAN_POINT('',(114.33165,-46.1831,1.585)); +#244070 = VECTOR('',#244071,1.); +#244071 = DIRECTION('',(-1.,0.,0.)); +#244072 = ORIENTED_EDGE('',*,*,#244073,.T.); +#244073 = EDGE_CURVE('',#244066,#244074,#244076,.T.); +#244074 = VERTEX_POINT('',#244075); +#244075 = CARTESIAN_POINT('',(113.69165,-49.7731,1.585)); +#244076 = LINE('',#244077,#244078); +#244077 = CARTESIAN_POINT('',(113.69165,-46.1831,1.585)); +#244078 = VECTOR('',#244079,1.); +#244079 = DIRECTION('',(0.,-1.,0.)); +#244080 = ORIENTED_EDGE('',*,*,#244081,.T.); +#244081 = EDGE_CURVE('',#244074,#244082,#244084,.T.); +#244082 = VERTEX_POINT('',#244083); +#244083 = CARTESIAN_POINT('',(123.69165,-49.7731,1.585)); +#244084 = LINE('',#244085,#244086); +#244085 = CARTESIAN_POINT('',(113.69165,-49.7731,1.585)); +#244086 = VECTOR('',#244087,1.); +#244087 = DIRECTION('',(1.,0.,0.)); +#244088 = ORIENTED_EDGE('',*,*,#244089,.T.); +#244089 = EDGE_CURVE('',#244082,#244090,#244092,.T.); +#244090 = VERTEX_POINT('',#244091); +#244091 = CARTESIAN_POINT('',(123.69165,-48.911628,1.585)); +#244092 = LINE('',#244093,#244094); +#244093 = CARTESIAN_POINT('',(123.69165,-49.7731,1.585)); +#244094 = VECTOR('',#244095,1.); +#244095 = DIRECTION('',(0.,1.,0.)); +#244096 = ORIENTED_EDGE('',*,*,#244097,.T.); +#244097 = EDGE_CURVE('',#244090,#244098,#244100,.T.); +#244098 = VERTEX_POINT('',#244099); +#244099 = CARTESIAN_POINT('',(123.724986,-48.89782,1.585)); +#244100 = LINE('',#244101,#244102); +#244101 = CARTESIAN_POINT('',(123.69165,-48.911628,1.585)); +#244102 = VECTOR('',#244103,1.); +#244103 = DIRECTION('',(0.923881720642,0.382678149707,0.)); +#244104 = ORIENTED_EDGE('',*,*,#244105,.T.); +#244105 = EDGE_CURVE('',#244098,#244106,#244108,.T.); +#244106 = VERTEX_POINT('',#244107); +#244107 = CARTESIAN_POINT('',(123.724986,-48.64838,1.585)); +#244108 = CIRCLE('',#244109,0.149999366947); +#244109 = AXIS2_PLACEMENT_3D('',#244110,#244111,#244112); +#244110 = CARTESIAN_POINT('',(123.64165094324,-48.7731,1.585)); +#244111 = DIRECTION('',(0.,-0.,1.)); +#244112 = DIRECTION('',(0.555569389738,-0.831470175765,-0.)); +#244113 = ORIENTED_EDGE('',*,*,#244114,.T.); +#244114 = EDGE_CURVE('',#244106,#244115,#244117,.T.); +#244115 = VERTEX_POINT('',#244116); +#244116 = CARTESIAN_POINT('',(123.69165,-48.634571,1.585)); +#244117 = LINE('',#244118,#244119); +#244118 = CARTESIAN_POINT('',(123.724986,-48.64838,1.585)); +#244119 = VECTOR('',#244120,1.); +#244120 = DIRECTION('',(-0.923871922094,0.382701805021,0.)); +#244121 = ORIENTED_EDGE('',*,*,#244122,.T.); +#244122 = EDGE_CURVE('',#244115,#244123,#244125,.T.); +#244123 = VERTEX_POINT('',#244124); +#244124 = CARTESIAN_POINT('',(123.69165,-46.1831,1.585)); +#244125 = LINE('',#244126,#244127); +#244126 = CARTESIAN_POINT('',(123.69165,-48.634571,1.585)); +#244127 = VECTOR('',#244128,1.); +#244128 = DIRECTION('',(0.,1.,0.)); +#244129 = ORIENTED_EDGE('',*,*,#244130,.T.); +#244130 = EDGE_CURVE('',#244123,#244131,#244133,.T.); +#244131 = VERTEX_POINT('',#244132); +#244132 = CARTESIAN_POINT('',(123.05165,-46.1831,1.585)); +#244133 = LINE('',#244134,#244135); +#244134 = CARTESIAN_POINT('',(123.69165,-46.1831,1.585)); +#244135 = VECTOR('',#244136,1.); +#244136 = DIRECTION('',(-1.,0.,0.)); +#244137 = ORIENTED_EDGE('',*,*,#244138,.T.); +#244138 = EDGE_CURVE('',#244131,#244139,#244141,.T.); +#244139 = VERTEX_POINT('',#244140); +#244140 = CARTESIAN_POINT('',(123.05165,-49.0731,1.585)); +#244141 = LINE('',#244142,#244143); +#244142 = CARTESIAN_POINT('',(123.05165,-46.1831,1.585)); +#244143 = VECTOR('',#244144,1.); +#244144 = DIRECTION('',(0.,-1.,0.)); +#244145 = ORIENTED_EDGE('',*,*,#244146,.T.); +#244146 = EDGE_CURVE('',#244139,#244147,#244149,.T.); +#244147 = VERTEX_POINT('',#244148); +#244148 = CARTESIAN_POINT('',(122.99165,-49.1331,1.585)); +#244149 = CIRCLE('',#244150,5.999932016257E-02); +#244150 = AXIS2_PLACEMENT_3D('',#244151,#244152,#244153); +#244151 = CARTESIAN_POINT('',(122.99165067984,-49.07310067984,1.585)); +#244152 = DIRECTION('',(0.,0.,-1.)); +#244153 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#244154 = ORIENTED_EDGE('',*,*,#244155,.T.); +#244155 = EDGE_CURVE('',#244147,#244047,#244156,.T.); +#244156 = LINE('',#244157,#244158); +#244157 = CARTESIAN_POINT('',(122.99165,-49.1331,1.585)); +#244158 = VECTOR('',#244159,1.); +#244159 = DIRECTION('',(-1.,0.,0.)); +#244160 = FACE_BOUND('',#244161,.F.); +#244161 = EDGE_LOOP('',(#244162,#244173,#244181,#244189,#244197,#244206, + #244214,#244222,#244230,#244239,#244247,#244255,#244263,#244272, + #244280,#244288,#244296,#244305,#244313,#244321,#244329,#244338)); +#244162 = ORIENTED_EDGE('',*,*,#244163,.T.); +#244163 = EDGE_CURVE('',#244164,#244166,#244168,.T.); +#244164 = VERTEX_POINT('',#244165); +#244165 = CARTESIAN_POINT('',(116.94165,-44.6831,1.585)); +#244166 = VERTEX_POINT('',#244167); +#244167 = CARTESIAN_POINT('',(116.88165,-44.6231,1.585)); +#244168 = CIRCLE('',#244169,5.999932016261E-02); +#244169 = AXIS2_PLACEMENT_3D('',#244170,#244171,#244172); +#244170 = CARTESIAN_POINT('',(116.94164932015,-44.62310067984,1.585)); +#244171 = DIRECTION('',(0.,0.,-1.)); +#244172 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244173 = ORIENTED_EDGE('',*,*,#244174,.T.); +#244174 = EDGE_CURVE('',#244166,#244175,#244177,.T.); +#244175 = VERTEX_POINT('',#244176); +#244176 = CARTESIAN_POINT('',(116.88165,-43.9231,1.585)); +#244177 = LINE('',#244178,#244179); +#244178 = CARTESIAN_POINT('',(116.88165,-44.6231,1.585)); +#244179 = VECTOR('',#244180,1.); +#244180 = DIRECTION('',(0.,1.,0.)); +#244181 = ORIENTED_EDGE('',*,*,#244182,.T.); +#244182 = EDGE_CURVE('',#244175,#244183,#244185,.T.); +#244183 = VERTEX_POINT('',#244184); +#244184 = CARTESIAN_POINT('',(115.50165,-43.9231,1.585)); +#244185 = LINE('',#244186,#244187); +#244186 = CARTESIAN_POINT('',(116.88165,-43.9231,1.585)); +#244187 = VECTOR('',#244188,1.); +#244188 = DIRECTION('',(-1.,0.,0.)); +#244189 = ORIENTED_EDGE('',*,*,#244190,.T.); +#244190 = EDGE_CURVE('',#244183,#244191,#244193,.T.); +#244191 = VERTEX_POINT('',#244192); +#244192 = CARTESIAN_POINT('',(115.50165,-44.6231,1.585)); +#244193 = LINE('',#244194,#244195); +#244194 = CARTESIAN_POINT('',(115.50165,-43.9231,1.585)); +#244195 = VECTOR('',#244196,1.); +#244196 = DIRECTION('',(0.,-1.,0.)); +#244197 = ORIENTED_EDGE('',*,*,#244198,.T.); +#244198 = EDGE_CURVE('',#244191,#244199,#244201,.T.); +#244199 = VERTEX_POINT('',#244200); +#244200 = CARTESIAN_POINT('',(115.44165,-44.6831,1.585)); +#244201 = CIRCLE('',#244202,5.999932016258E-02); +#244202 = AXIS2_PLACEMENT_3D('',#244203,#244204,#244205); +#244203 = CARTESIAN_POINT('',(115.44165067984,-44.62310067984,1.585)); +#244204 = DIRECTION('',(0.,0.,-1.)); +#244205 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#244206 = ORIENTED_EDGE('',*,*,#244207,.T.); +#244207 = EDGE_CURVE('',#244199,#244208,#244210,.T.); +#244208 = VERTEX_POINT('',#244209); +#244209 = CARTESIAN_POINT('',(113.69165,-44.6831,1.585)); +#244210 = LINE('',#244211,#244212); +#244211 = CARTESIAN_POINT('',(115.44165,-44.6831,1.585)); +#244212 = VECTOR('',#244213,1.); +#244213 = DIRECTION('',(-1.,0.,0.)); +#244214 = ORIENTED_EDGE('',*,*,#244215,.T.); +#244215 = EDGE_CURVE('',#244208,#244216,#244218,.T.); +#244216 = VERTEX_POINT('',#244217); +#244217 = CARTESIAN_POINT('',(113.69165,-46.0631,1.585)); +#244218 = LINE('',#244219,#244220); +#244219 = CARTESIAN_POINT('',(113.69165,-44.6831,1.585)); +#244220 = VECTOR('',#244221,1.); +#244221 = DIRECTION('',(0.,-1.,0.)); +#244222 = ORIENTED_EDGE('',*,*,#244223,.T.); +#244223 = EDGE_CURVE('',#244216,#244224,#244226,.T.); +#244224 = VERTEX_POINT('',#244225); +#244225 = CARTESIAN_POINT('',(114.39165,-46.0631,1.585)); +#244226 = LINE('',#244227,#244228); +#244227 = CARTESIAN_POINT('',(113.69165,-46.0631,1.585)); +#244228 = VECTOR('',#244229,1.); +#244229 = DIRECTION('',(1.,0.,0.)); +#244230 = ORIENTED_EDGE('',*,*,#244231,.T.); +#244231 = EDGE_CURVE('',#244224,#244232,#244234,.T.); +#244232 = VERTEX_POINT('',#244233); +#244233 = CARTESIAN_POINT('',(114.45165,-46.1231,1.585)); +#244234 = CIRCLE('',#244235,5.999932016261E-02); +#244235 = AXIS2_PLACEMENT_3D('',#244236,#244237,#244238); +#244236 = CARTESIAN_POINT('',(114.39165067984,-46.12309932015,1.585)); +#244237 = DIRECTION('',(0.,0.,-1.)); +#244238 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#244239 = ORIENTED_EDGE('',*,*,#244240,.T.); +#244240 = EDGE_CURVE('',#244232,#244241,#244243,.T.); +#244241 = VERTEX_POINT('',#244242); +#244242 = CARTESIAN_POINT('',(114.45165,-49.0131,1.585)); +#244243 = LINE('',#244244,#244245); +#244244 = CARTESIAN_POINT('',(114.45165,-46.1231,1.585)); +#244245 = VECTOR('',#244246,1.); +#244246 = DIRECTION('',(0.,-1.,0.)); +#244247 = ORIENTED_EDGE('',*,*,#244248,.T.); +#244248 = EDGE_CURVE('',#244241,#244249,#244251,.T.); +#244249 = VERTEX_POINT('',#244250); +#244250 = CARTESIAN_POINT('',(122.93165,-49.0131,1.585)); +#244251 = LINE('',#244252,#244253); +#244252 = CARTESIAN_POINT('',(114.45165,-49.0131,1.585)); +#244253 = VECTOR('',#244254,1.); +#244254 = DIRECTION('',(1.,0.,0.)); +#244255 = ORIENTED_EDGE('',*,*,#244256,.T.); +#244256 = EDGE_CURVE('',#244249,#244257,#244259,.T.); +#244257 = VERTEX_POINT('',#244258); +#244258 = CARTESIAN_POINT('',(122.93165,-46.1231,1.585)); +#244259 = LINE('',#244260,#244261); +#244260 = CARTESIAN_POINT('',(122.93165,-49.0131,1.585)); +#244261 = VECTOR('',#244262,1.); +#244262 = DIRECTION('',(0.,1.,0.)); +#244263 = ORIENTED_EDGE('',*,*,#244264,.T.); +#244264 = EDGE_CURVE('',#244257,#244265,#244267,.T.); +#244265 = VERTEX_POINT('',#244266); +#244266 = CARTESIAN_POINT('',(122.99165,-46.0631,1.585)); +#244267 = CIRCLE('',#244268,5.999932016258E-02); +#244268 = AXIS2_PLACEMENT_3D('',#244269,#244270,#244271); +#244269 = CARTESIAN_POINT('',(122.99164932015,-46.12309932015,1.585)); +#244270 = DIRECTION('',(0.,0.,-1.)); +#244271 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#244272 = ORIENTED_EDGE('',*,*,#244273,.T.); +#244273 = EDGE_CURVE('',#244265,#244274,#244276,.T.); +#244274 = VERTEX_POINT('',#244275); +#244275 = CARTESIAN_POINT('',(123.69165,-46.0631,1.585)); +#244276 = LINE('',#244277,#244278); +#244277 = CARTESIAN_POINT('',(122.99165,-46.0631,1.585)); +#244278 = VECTOR('',#244279,1.); +#244279 = DIRECTION('',(1.,0.,0.)); +#244280 = ORIENTED_EDGE('',*,*,#244281,.T.); +#244281 = EDGE_CURVE('',#244274,#244282,#244284,.T.); +#244282 = VERTEX_POINT('',#244283); +#244283 = CARTESIAN_POINT('',(123.69165,-44.6831,1.585)); +#244284 = LINE('',#244285,#244286); +#244285 = CARTESIAN_POINT('',(123.69165,-46.0631,1.585)); +#244286 = VECTOR('',#244287,1.); +#244287 = DIRECTION('',(0.,1.,0.)); +#244288 = ORIENTED_EDGE('',*,*,#244289,.T.); +#244289 = EDGE_CURVE('',#244282,#244290,#244292,.T.); +#244290 = VERTEX_POINT('',#244291); +#244291 = CARTESIAN_POINT('',(121.94165,-44.6831,1.585)); +#244292 = LINE('',#244293,#244294); +#244293 = CARTESIAN_POINT('',(123.69165,-44.6831,1.585)); +#244294 = VECTOR('',#244295,1.); +#244295 = DIRECTION('',(-1.,0.,0.)); +#244296 = ORIENTED_EDGE('',*,*,#244297,.T.); +#244297 = EDGE_CURVE('',#244290,#244298,#244300,.T.); +#244298 = VERTEX_POINT('',#244299); +#244299 = CARTESIAN_POINT('',(121.88165,-44.6231,1.585)); +#244300 = CIRCLE('',#244301,5.999932016261E-02); +#244301 = AXIS2_PLACEMENT_3D('',#244302,#244303,#244304); +#244302 = CARTESIAN_POINT('',(121.94164932015,-44.62310067984,1.585)); +#244303 = DIRECTION('',(0.,0.,-1.)); +#244304 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244305 = ORIENTED_EDGE('',*,*,#244306,.T.); +#244306 = EDGE_CURVE('',#244298,#244307,#244309,.T.); +#244307 = VERTEX_POINT('',#244308); +#244308 = CARTESIAN_POINT('',(121.88165,-43.9231,1.585)); +#244309 = LINE('',#244310,#244311); +#244310 = CARTESIAN_POINT('',(121.88165,-44.6231,1.585)); +#244311 = VECTOR('',#244312,1.); +#244312 = DIRECTION('',(0.,1.,0.)); +#244313 = ORIENTED_EDGE('',*,*,#244314,.T.); +#244314 = EDGE_CURVE('',#244307,#244315,#244317,.T.); +#244315 = VERTEX_POINT('',#244316); +#244316 = CARTESIAN_POINT('',(120.50165,-43.9231,1.585)); +#244317 = LINE('',#244318,#244319); +#244318 = CARTESIAN_POINT('',(121.88165,-43.9231,1.585)); +#244319 = VECTOR('',#244320,1.); +#244320 = DIRECTION('',(-1.,0.,0.)); +#244321 = ORIENTED_EDGE('',*,*,#244322,.T.); +#244322 = EDGE_CURVE('',#244315,#244323,#244325,.T.); +#244323 = VERTEX_POINT('',#244324); +#244324 = CARTESIAN_POINT('',(120.50165,-44.6231,1.585)); +#244325 = LINE('',#244326,#244327); +#244326 = CARTESIAN_POINT('',(120.50165,-43.9231,1.585)); +#244327 = VECTOR('',#244328,1.); +#244328 = DIRECTION('',(0.,-1.,0.)); +#244329 = ORIENTED_EDGE('',*,*,#244330,.T.); +#244330 = EDGE_CURVE('',#244323,#244331,#244333,.T.); +#244331 = VERTEX_POINT('',#244332); +#244332 = CARTESIAN_POINT('',(120.44165,-44.6831,1.585)); +#244333 = CIRCLE('',#244334,5.999932016258E-02); +#244334 = AXIS2_PLACEMENT_3D('',#244335,#244336,#244337); +#244335 = CARTESIAN_POINT('',(120.44165067984,-44.62310067984,1.585)); +#244336 = DIRECTION('',(0.,0.,-1.)); +#244337 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#244338 = ORIENTED_EDGE('',*,*,#244339,.T.); +#244339 = EDGE_CURVE('',#244331,#244164,#244340,.T.); +#244340 = LINE('',#244341,#244342); +#244341 = CARTESIAN_POINT('',(120.44165,-44.6831,1.585)); +#244342 = VECTOR('',#244343,1.); +#244343 = DIRECTION('',(-1.,0.,0.)); +#244344 = FACE_BOUND('',#244345,.F.); +#244345 = EDGE_LOOP('',(#244346,#244356,#244364,#244372)); +#244346 = ORIENTED_EDGE('',*,*,#244347,.T.); +#244347 = EDGE_CURVE('',#244348,#244350,#244352,.T.); +#244348 = VERTEX_POINT('',#244349); +#244349 = CARTESIAN_POINT('',(115.38165,-44.5631,1.585)); +#244350 = VERTEX_POINT('',#244351); +#244351 = CARTESIAN_POINT('',(115.38165,-43.9331,1.585)); +#244352 = LINE('',#244353,#244354); +#244353 = CARTESIAN_POINT('',(115.38165,-44.5631,1.585)); +#244354 = VECTOR('',#244355,1.); +#244355 = DIRECTION('',(0.,1.,0.)); +#244356 = ORIENTED_EDGE('',*,*,#244357,.T.); +#244357 = EDGE_CURVE('',#244350,#244358,#244360,.T.); +#244358 = VERTEX_POINT('',#244359); +#244359 = CARTESIAN_POINT('',(113.70165,-43.9331,1.585)); +#244360 = LINE('',#244361,#244362); +#244361 = CARTESIAN_POINT('',(115.38165,-43.9331,1.585)); +#244362 = VECTOR('',#244363,1.); +#244363 = DIRECTION('',(-1.,0.,0.)); +#244364 = ORIENTED_EDGE('',*,*,#244365,.T.); +#244365 = EDGE_CURVE('',#244358,#244366,#244368,.T.); +#244366 = VERTEX_POINT('',#244367); +#244367 = CARTESIAN_POINT('',(113.70165,-44.5631,1.585)); +#244368 = LINE('',#244369,#244370); +#244369 = CARTESIAN_POINT('',(113.70165,-43.9331,1.585)); +#244370 = VECTOR('',#244371,1.); +#244371 = DIRECTION('',(0.,-1.,0.)); +#244372 = ORIENTED_EDGE('',*,*,#244373,.T.); +#244373 = EDGE_CURVE('',#244366,#244348,#244374,.T.); +#244374 = LINE('',#244375,#244376); +#244375 = CARTESIAN_POINT('',(113.70165,-44.5631,1.585)); +#244376 = VECTOR('',#244377,1.); +#244377 = DIRECTION('',(1.,0.,0.)); +#244378 = FACE_BOUND('',#244379,.F.); +#244379 = EDGE_LOOP('',(#244380,#244390,#244398,#244406)); +#244380 = ORIENTED_EDGE('',*,*,#244381,.T.); +#244381 = EDGE_CURVE('',#244382,#244384,#244386,.T.); +#244382 = VERTEX_POINT('',#244383); +#244383 = CARTESIAN_POINT('',(120.38165,-44.5631,1.585)); +#244384 = VERTEX_POINT('',#244385); +#244385 = CARTESIAN_POINT('',(120.38165,-43.9331,1.585)); +#244386 = LINE('',#244387,#244388); +#244387 = CARTESIAN_POINT('',(120.38165,-44.5631,1.585)); +#244388 = VECTOR('',#244389,1.); +#244389 = DIRECTION('',(0.,1.,0.)); +#244390 = ORIENTED_EDGE('',*,*,#244391,.T.); +#244391 = EDGE_CURVE('',#244384,#244392,#244394,.T.); +#244392 = VERTEX_POINT('',#244393); +#244393 = CARTESIAN_POINT('',(117.00165,-43.9331,1.585)); +#244394 = LINE('',#244395,#244396); +#244395 = CARTESIAN_POINT('',(120.38165,-43.9331,1.585)); +#244396 = VECTOR('',#244397,1.); +#244397 = DIRECTION('',(-1.,0.,0.)); +#244398 = ORIENTED_EDGE('',*,*,#244399,.T.); +#244399 = EDGE_CURVE('',#244392,#244400,#244402,.T.); +#244400 = VERTEX_POINT('',#244401); +#244401 = CARTESIAN_POINT('',(117.00165,-44.5631,1.585)); +#244402 = LINE('',#244403,#244404); +#244403 = CARTESIAN_POINT('',(117.00165,-43.9331,1.585)); +#244404 = VECTOR('',#244405,1.); +#244405 = DIRECTION('',(0.,-1.,0.)); +#244406 = ORIENTED_EDGE('',*,*,#244407,.T.); +#244407 = EDGE_CURVE('',#244400,#244382,#244408,.T.); +#244408 = LINE('',#244409,#244410); +#244409 = CARTESIAN_POINT('',(117.00165,-44.5631,1.585)); +#244410 = VECTOR('',#244411,1.); +#244411 = DIRECTION('',(1.,0.,0.)); +#244412 = FACE_BOUND('',#244413,.F.); +#244413 = EDGE_LOOP('',(#244414,#244424,#244432,#244440)); +#244414 = ORIENTED_EDGE('',*,*,#244415,.T.); +#244415 = EDGE_CURVE('',#244416,#244418,#244420,.T.); +#244416 = VERTEX_POINT('',#244417); +#244417 = CARTESIAN_POINT('',(123.68165,-44.5631,1.585)); +#244418 = VERTEX_POINT('',#244419); +#244419 = CARTESIAN_POINT('',(123.68165,-43.9331,1.585)); +#244420 = LINE('',#244421,#244422); +#244421 = CARTESIAN_POINT('',(123.68165,-44.5631,1.585)); +#244422 = VECTOR('',#244423,1.); +#244423 = DIRECTION('',(0.,1.,0.)); +#244424 = ORIENTED_EDGE('',*,*,#244425,.T.); +#244425 = EDGE_CURVE('',#244418,#244426,#244428,.T.); +#244426 = VERTEX_POINT('',#244427); +#244427 = CARTESIAN_POINT('',(122.00165,-43.9331,1.585)); +#244428 = LINE('',#244429,#244430); +#244429 = CARTESIAN_POINT('',(123.68165,-43.9331,1.585)); +#244430 = VECTOR('',#244431,1.); +#244431 = DIRECTION('',(-1.,0.,0.)); +#244432 = ORIENTED_EDGE('',*,*,#244433,.T.); +#244433 = EDGE_CURVE('',#244426,#244434,#244436,.T.); +#244434 = VERTEX_POINT('',#244435); +#244435 = CARTESIAN_POINT('',(122.00165,-44.5631,1.585)); +#244436 = LINE('',#244437,#244438); +#244437 = CARTESIAN_POINT('',(122.00165,-43.9331,1.585)); +#244438 = VECTOR('',#244439,1.); +#244439 = DIRECTION('',(0.,-1.,0.)); +#244440 = ORIENTED_EDGE('',*,*,#244441,.T.); +#244441 = EDGE_CURVE('',#244434,#244416,#244442,.T.); +#244442 = LINE('',#244443,#244444); +#244443 = CARTESIAN_POINT('',(122.00165,-44.5631,1.585)); +#244444 = VECTOR('',#244445,1.); +#244445 = DIRECTION('',(1.,0.,0.)); +#244446 = PLANE('',#244447); +#244447 = AXIS2_PLACEMENT_3D('',#244448,#244449,#244450); +#244448 = CARTESIAN_POINT('',(0.,0.,1.585)); +#244449 = DIRECTION('',(0.,0.,1.)); +#244450 = DIRECTION('',(1.,0.,-0.)); +#244451 = SHELL_BASED_SURFACE_MODEL('',(#244452)); +#244452 = OPEN_SHELL('',(#244453)); +#244453 = ADVANCED_FACE('',(#244454,#244524,#244608,#244792,#244826, + #244860),#244894,.T.); +#244454 = FACE_BOUND('',#244455,.F.); +#244455 = EDGE_LOOP('',(#244456,#244467,#244475,#244484,#244492,#244501, + #244509,#244518)); +#244456 = ORIENTED_EDGE('',*,*,#244457,.T.); +#244457 = EDGE_CURVE('',#244458,#244460,#244462,.T.); +#244458 = VERTEX_POINT('',#244459); +#244459 = CARTESIAN_POINT('',(124.57165,-43.8631,1.585)); +#244460 = VERTEX_POINT('',#244461); +#244461 = CARTESIAN_POINT('',(124.63165,-43.8031,1.585)); +#244462 = CIRCLE('',#244463,5.999932016257E-02); +#244463 = AXIS2_PLACEMENT_3D('',#244464,#244465,#244466); +#244464 = CARTESIAN_POINT('',(124.63164932015,-43.86309932015,1.585)); +#244465 = DIRECTION('',(0.,0.,-1.)); +#244466 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#244467 = ORIENTED_EDGE('',*,*,#244468,.T.); +#244468 = EDGE_CURVE('',#244460,#244469,#244471,.T.); +#244469 = VERTEX_POINT('',#244470); +#244470 = CARTESIAN_POINT('',(132.25165,-43.8031,1.585)); +#244471 = LINE('',#244472,#244473); +#244472 = CARTESIAN_POINT('',(124.63165,-43.8031,1.585)); +#244473 = VECTOR('',#244474,1.); +#244474 = DIRECTION('',(1.,0.,0.)); +#244475 = ORIENTED_EDGE('',*,*,#244476,.T.); +#244476 = EDGE_CURVE('',#244469,#244477,#244479,.T.); +#244477 = VERTEX_POINT('',#244478); +#244478 = CARTESIAN_POINT('',(132.31165,-43.8631,1.585)); +#244479 = CIRCLE('',#244480,5.999932016262E-02); +#244480 = AXIS2_PLACEMENT_3D('',#244481,#244482,#244483); +#244481 = CARTESIAN_POINT('',(132.25165067984,-43.86309932015,1.585)); +#244482 = DIRECTION('',(0.,0.,-1.)); +#244483 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#244484 = ORIENTED_EDGE('',*,*,#244485,.T.); +#244485 = EDGE_CURVE('',#244477,#244486,#244488,.T.); +#244486 = VERTEX_POINT('',#244487); +#244487 = CARTESIAN_POINT('',(132.31165,-49.8331,1.585)); +#244488 = LINE('',#244489,#244490); +#244489 = CARTESIAN_POINT('',(132.31165,-43.8631,1.585)); +#244490 = VECTOR('',#244491,1.); +#244491 = DIRECTION('',(0.,-1.,0.)); +#244492 = ORIENTED_EDGE('',*,*,#244493,.T.); +#244493 = EDGE_CURVE('',#244486,#244494,#244496,.T.); +#244494 = VERTEX_POINT('',#244495); +#244495 = CARTESIAN_POINT('',(132.25165,-49.8931,1.585)); +#244496 = CIRCLE('',#244497,5.999932016254E-02); +#244497 = AXIS2_PLACEMENT_3D('',#244498,#244499,#244500); +#244498 = CARTESIAN_POINT('',(132.25165067984,-49.83310067984,1.585)); +#244499 = DIRECTION('',(0.,0.,-1.)); +#244500 = DIRECTION('',(0.999999999936,1.133081683199E-05,0.)); +#244501 = ORIENTED_EDGE('',*,*,#244502,.T.); +#244502 = EDGE_CURVE('',#244494,#244503,#244505,.T.); +#244503 = VERTEX_POINT('',#244504); +#244504 = CARTESIAN_POINT('',(124.63165,-49.8931,1.585)); +#244505 = LINE('',#244506,#244507); +#244506 = CARTESIAN_POINT('',(132.25165,-49.8931,1.585)); +#244507 = VECTOR('',#244508,1.); +#244508 = DIRECTION('',(-1.,0.,0.)); +#244509 = ORIENTED_EDGE('',*,*,#244510,.T.); +#244510 = EDGE_CURVE('',#244503,#244511,#244513,.T.); +#244511 = VERTEX_POINT('',#244512); +#244512 = CARTESIAN_POINT('',(124.57165,-49.8331,1.585)); +#244513 = CIRCLE('',#244514,5.999932016258E-02); +#244514 = AXIS2_PLACEMENT_3D('',#244515,#244516,#244517); +#244515 = CARTESIAN_POINT('',(124.63164932015,-49.83310067984,1.585)); +#244516 = DIRECTION('',(0.,0.,-1.)); +#244517 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#244518 = ORIENTED_EDGE('',*,*,#244519,.T.); +#244519 = EDGE_CURVE('',#244511,#244458,#244520,.T.); +#244520 = LINE('',#244521,#244522); +#244521 = CARTESIAN_POINT('',(124.57165,-49.8331,1.585)); +#244522 = VECTOR('',#244523,1.); +#244523 = DIRECTION('',(0.,1.,0.)); +#244524 = FACE_BOUND('',#244525,.F.); +#244525 = EDGE_LOOP('',(#244526,#244537,#244545,#244553,#244561,#244569, + #244577,#244585,#244593,#244602)); +#244526 = ORIENTED_EDGE('',*,*,#244527,.T.); +#244527 = EDGE_CURVE('',#244528,#244530,#244532,.T.); +#244528 = VERTEX_POINT('',#244529); +#244529 = CARTESIAN_POINT('',(125.39165,-49.1331,1.585)); +#244530 = VERTEX_POINT('',#244531); +#244531 = CARTESIAN_POINT('',(125.33165,-49.0731,1.585)); +#244532 = CIRCLE('',#244533,5.999932016261E-02); +#244533 = AXIS2_PLACEMENT_3D('',#244534,#244535,#244536); +#244534 = CARTESIAN_POINT('',(125.39164932015,-49.07310067984,1.585)); +#244535 = DIRECTION('',(0.,0.,-1.)); +#244536 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#244537 = ORIENTED_EDGE('',*,*,#244538,.T.); +#244538 = EDGE_CURVE('',#244530,#244539,#244541,.T.); +#244539 = VERTEX_POINT('',#244540); +#244540 = CARTESIAN_POINT('',(125.33165,-46.1831,1.585)); +#244541 = LINE('',#244542,#244543); +#244542 = CARTESIAN_POINT('',(125.33165,-49.0731,1.585)); +#244543 = VECTOR('',#244544,1.); +#244544 = DIRECTION('',(0.,1.,0.)); +#244545 = ORIENTED_EDGE('',*,*,#244546,.T.); +#244546 = EDGE_CURVE('',#244539,#244547,#244549,.T.); +#244547 = VERTEX_POINT('',#244548); +#244548 = CARTESIAN_POINT('',(124.69165,-46.1831,1.585)); +#244549 = LINE('',#244550,#244551); +#244550 = CARTESIAN_POINT('',(125.33165,-46.1831,1.585)); +#244551 = VECTOR('',#244552,1.); +#244552 = DIRECTION('',(-1.,0.,0.)); +#244553 = ORIENTED_EDGE('',*,*,#244554,.T.); +#244554 = EDGE_CURVE('',#244547,#244555,#244557,.T.); +#244555 = VERTEX_POINT('',#244556); +#244556 = CARTESIAN_POINT('',(124.69165,-49.7731,1.585)); +#244557 = LINE('',#244558,#244559); +#244558 = CARTESIAN_POINT('',(124.69165,-46.1831,1.585)); +#244559 = VECTOR('',#244560,1.); +#244560 = DIRECTION('',(0.,-1.,0.)); +#244561 = ORIENTED_EDGE('',*,*,#244562,.T.); +#244562 = EDGE_CURVE('',#244555,#244563,#244565,.T.); +#244563 = VERTEX_POINT('',#244564); +#244564 = CARTESIAN_POINT('',(132.19165,-49.7731,1.585)); +#244565 = LINE('',#244566,#244567); +#244566 = CARTESIAN_POINT('',(124.69165,-49.7731,1.585)); +#244567 = VECTOR('',#244568,1.); +#244568 = DIRECTION('',(1.,0.,0.)); +#244569 = ORIENTED_EDGE('',*,*,#244570,.T.); +#244570 = EDGE_CURVE('',#244563,#244571,#244573,.T.); +#244571 = VERTEX_POINT('',#244572); +#244572 = CARTESIAN_POINT('',(132.19165,-46.1831,1.585)); +#244573 = LINE('',#244574,#244575); +#244574 = CARTESIAN_POINT('',(132.19165,-49.7731,1.585)); +#244575 = VECTOR('',#244576,1.); +#244576 = DIRECTION('',(0.,1.,0.)); +#244577 = ORIENTED_EDGE('',*,*,#244578,.T.); +#244578 = EDGE_CURVE('',#244571,#244579,#244581,.T.); +#244579 = VERTEX_POINT('',#244580); +#244580 = CARTESIAN_POINT('',(131.55165,-46.1831,1.585)); +#244581 = LINE('',#244582,#244583); +#244582 = CARTESIAN_POINT('',(132.19165,-46.1831,1.585)); +#244583 = VECTOR('',#244584,1.); +#244584 = DIRECTION('',(-1.,0.,0.)); +#244585 = ORIENTED_EDGE('',*,*,#244586,.T.); +#244586 = EDGE_CURVE('',#244579,#244587,#244589,.T.); +#244587 = VERTEX_POINT('',#244588); +#244588 = CARTESIAN_POINT('',(131.55165,-49.0731,1.585)); +#244589 = LINE('',#244590,#244591); +#244590 = CARTESIAN_POINT('',(131.55165,-46.1831,1.585)); +#244591 = VECTOR('',#244592,1.); +#244592 = DIRECTION('',(0.,-1.,0.)); +#244593 = ORIENTED_EDGE('',*,*,#244594,.T.); +#244594 = EDGE_CURVE('',#244587,#244595,#244597,.T.); +#244595 = VERTEX_POINT('',#244596); +#244596 = CARTESIAN_POINT('',(131.49165,-49.1331,1.585)); +#244597 = CIRCLE('',#244598,5.999932016262E-02); +#244598 = AXIS2_PLACEMENT_3D('',#244599,#244600,#244601); +#244599 = CARTESIAN_POINT('',(131.49165067984,-49.07310067984,1.585)); +#244600 = DIRECTION('',(0.,0.,-1.)); +#244601 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#244602 = ORIENTED_EDGE('',*,*,#244603,.T.); +#244603 = EDGE_CURVE('',#244595,#244528,#244604,.T.); +#244604 = LINE('',#244605,#244606); +#244605 = CARTESIAN_POINT('',(131.49165,-49.1331,1.585)); +#244606 = VECTOR('',#244607,1.); +#244607 = DIRECTION('',(-1.,0.,0.)); +#244608 = FACE_BOUND('',#244609,.F.); +#244609 = EDGE_LOOP('',(#244610,#244621,#244629,#244637,#244645,#244654, + #244662,#244670,#244678,#244687,#244695,#244703,#244711,#244720, + #244728,#244736,#244744,#244753,#244761,#244769,#244777,#244786)); +#244610 = ORIENTED_EDGE('',*,*,#244611,.T.); +#244611 = EDGE_CURVE('',#244612,#244614,#244616,.T.); +#244612 = VERTEX_POINT('',#244613); +#244613 = CARTESIAN_POINT('',(127.94165,-44.6831,1.585)); +#244614 = VERTEX_POINT('',#244615); +#244615 = CARTESIAN_POINT('',(127.88165,-44.6231,1.585)); +#244616 = CIRCLE('',#244617,5.999932016261E-02); +#244617 = AXIS2_PLACEMENT_3D('',#244618,#244619,#244620); +#244618 = CARTESIAN_POINT('',(127.94164932015,-44.62310067984,1.585)); +#244619 = DIRECTION('',(0.,0.,-1.)); +#244620 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244621 = ORIENTED_EDGE('',*,*,#244622,.T.); +#244622 = EDGE_CURVE('',#244614,#244623,#244625,.T.); +#244623 = VERTEX_POINT('',#244624); +#244624 = CARTESIAN_POINT('',(127.88165,-43.9231,1.585)); +#244625 = LINE('',#244626,#244627); +#244626 = CARTESIAN_POINT('',(127.88165,-44.6231,1.585)); +#244627 = VECTOR('',#244628,1.); +#244628 = DIRECTION('',(0.,1.,0.)); +#244629 = ORIENTED_EDGE('',*,*,#244630,.T.); +#244630 = EDGE_CURVE('',#244623,#244631,#244633,.T.); +#244631 = VERTEX_POINT('',#244632); +#244632 = CARTESIAN_POINT('',(126.50165,-43.9231,1.585)); +#244633 = LINE('',#244634,#244635); +#244634 = CARTESIAN_POINT('',(127.88165,-43.9231,1.585)); +#244635 = VECTOR('',#244636,1.); +#244636 = DIRECTION('',(-1.,0.,0.)); +#244637 = ORIENTED_EDGE('',*,*,#244638,.T.); +#244638 = EDGE_CURVE('',#244631,#244639,#244641,.T.); +#244639 = VERTEX_POINT('',#244640); +#244640 = CARTESIAN_POINT('',(126.50165,-44.6231,1.585)); +#244641 = LINE('',#244642,#244643); +#244642 = CARTESIAN_POINT('',(126.50165,-43.9231,1.585)); +#244643 = VECTOR('',#244644,1.); +#244644 = DIRECTION('',(0.,-1.,0.)); +#244645 = ORIENTED_EDGE('',*,*,#244646,.T.); +#244646 = EDGE_CURVE('',#244639,#244647,#244649,.T.); +#244647 = VERTEX_POINT('',#244648); +#244648 = CARTESIAN_POINT('',(126.44165,-44.6831,1.585)); +#244649 = CIRCLE('',#244650,5.999932016258E-02); +#244650 = AXIS2_PLACEMENT_3D('',#244651,#244652,#244653); +#244651 = CARTESIAN_POINT('',(126.44165067984,-44.62310067984,1.585)); +#244652 = DIRECTION('',(0.,0.,-1.)); +#244653 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#244654 = ORIENTED_EDGE('',*,*,#244655,.T.); +#244655 = EDGE_CURVE('',#244647,#244656,#244658,.T.); +#244656 = VERTEX_POINT('',#244657); +#244657 = CARTESIAN_POINT('',(124.69165,-44.6831,1.585)); +#244658 = LINE('',#244659,#244660); +#244659 = CARTESIAN_POINT('',(126.44165,-44.6831,1.585)); +#244660 = VECTOR('',#244661,1.); +#244661 = DIRECTION('',(-1.,0.,0.)); +#244662 = ORIENTED_EDGE('',*,*,#244663,.T.); +#244663 = EDGE_CURVE('',#244656,#244664,#244666,.T.); +#244664 = VERTEX_POINT('',#244665); +#244665 = CARTESIAN_POINT('',(124.69165,-46.0631,1.585)); +#244666 = LINE('',#244667,#244668); +#244667 = CARTESIAN_POINT('',(124.69165,-44.6831,1.585)); +#244668 = VECTOR('',#244669,1.); +#244669 = DIRECTION('',(0.,-1.,0.)); +#244670 = ORIENTED_EDGE('',*,*,#244671,.T.); +#244671 = EDGE_CURVE('',#244664,#244672,#244674,.T.); +#244672 = VERTEX_POINT('',#244673); +#244673 = CARTESIAN_POINT('',(125.39165,-46.0631,1.585)); +#244674 = LINE('',#244675,#244676); +#244675 = CARTESIAN_POINT('',(124.69165,-46.0631,1.585)); +#244676 = VECTOR('',#244677,1.); +#244677 = DIRECTION('',(1.,0.,0.)); +#244678 = ORIENTED_EDGE('',*,*,#244679,.T.); +#244679 = EDGE_CURVE('',#244672,#244680,#244682,.T.); +#244680 = VERTEX_POINT('',#244681); +#244681 = CARTESIAN_POINT('',(125.45165,-46.1231,1.585)); +#244682 = CIRCLE('',#244683,5.999932016261E-02); +#244683 = AXIS2_PLACEMENT_3D('',#244684,#244685,#244686); +#244684 = CARTESIAN_POINT('',(125.39165067984,-46.12309932015,1.585)); +#244685 = DIRECTION('',(0.,0.,-1.)); +#244686 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#244687 = ORIENTED_EDGE('',*,*,#244688,.T.); +#244688 = EDGE_CURVE('',#244680,#244689,#244691,.T.); +#244689 = VERTEX_POINT('',#244690); +#244690 = CARTESIAN_POINT('',(125.45165,-49.0131,1.585)); +#244691 = LINE('',#244692,#244693); +#244692 = CARTESIAN_POINT('',(125.45165,-46.1231,1.585)); +#244693 = VECTOR('',#244694,1.); +#244694 = DIRECTION('',(0.,-1.,0.)); +#244695 = ORIENTED_EDGE('',*,*,#244696,.T.); +#244696 = EDGE_CURVE('',#244689,#244697,#244699,.T.); +#244697 = VERTEX_POINT('',#244698); +#244698 = CARTESIAN_POINT('',(131.43165,-49.0131,1.585)); +#244699 = LINE('',#244700,#244701); +#244700 = CARTESIAN_POINT('',(125.45165,-49.0131,1.585)); +#244701 = VECTOR('',#244702,1.); +#244702 = DIRECTION('',(1.,0.,0.)); +#244703 = ORIENTED_EDGE('',*,*,#244704,.T.); +#244704 = EDGE_CURVE('',#244697,#244705,#244707,.T.); +#244705 = VERTEX_POINT('',#244706); +#244706 = CARTESIAN_POINT('',(131.43165,-46.1231,1.585)); +#244707 = LINE('',#244708,#244709); +#244708 = CARTESIAN_POINT('',(131.43165,-49.0131,1.585)); +#244709 = VECTOR('',#244710,1.); +#244710 = DIRECTION('',(0.,1.,0.)); +#244711 = ORIENTED_EDGE('',*,*,#244712,.T.); +#244712 = EDGE_CURVE('',#244705,#244713,#244715,.T.); +#244713 = VERTEX_POINT('',#244714); +#244714 = CARTESIAN_POINT('',(131.49165,-46.0631,1.585)); +#244715 = CIRCLE('',#244716,5.999932016262E-02); +#244716 = AXIS2_PLACEMENT_3D('',#244717,#244718,#244719); +#244717 = CARTESIAN_POINT('',(131.49164932015,-46.12309932015,1.585)); +#244718 = DIRECTION('',(0.,0.,-1.)); +#244719 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#244720 = ORIENTED_EDGE('',*,*,#244721,.T.); +#244721 = EDGE_CURVE('',#244713,#244722,#244724,.T.); +#244722 = VERTEX_POINT('',#244723); +#244723 = CARTESIAN_POINT('',(132.19165,-46.0631,1.585)); +#244724 = LINE('',#244725,#244726); +#244725 = CARTESIAN_POINT('',(131.49165,-46.0631,1.585)); +#244726 = VECTOR('',#244727,1.); +#244727 = DIRECTION('',(1.,0.,0.)); +#244728 = ORIENTED_EDGE('',*,*,#244729,.T.); +#244729 = EDGE_CURVE('',#244722,#244730,#244732,.T.); +#244730 = VERTEX_POINT('',#244731); +#244731 = CARTESIAN_POINT('',(132.19165,-44.6831,1.585)); +#244732 = LINE('',#244733,#244734); +#244733 = CARTESIAN_POINT('',(132.19165,-46.0631,1.585)); +#244734 = VECTOR('',#244735,1.); +#244735 = DIRECTION('',(0.,1.,0.)); +#244736 = ORIENTED_EDGE('',*,*,#244737,.T.); +#244737 = EDGE_CURVE('',#244730,#244738,#244740,.T.); +#244738 = VERTEX_POINT('',#244739); +#244739 = CARTESIAN_POINT('',(130.44165,-44.6831,1.585)); +#244740 = LINE('',#244741,#244742); +#244741 = CARTESIAN_POINT('',(132.19165,-44.6831,1.585)); +#244742 = VECTOR('',#244743,1.); +#244743 = DIRECTION('',(-1.,0.,0.)); +#244744 = ORIENTED_EDGE('',*,*,#244745,.T.); +#244745 = EDGE_CURVE('',#244738,#244746,#244748,.T.); +#244746 = VERTEX_POINT('',#244747); +#244747 = CARTESIAN_POINT('',(130.38165,-44.6231,1.585)); +#244748 = CIRCLE('',#244749,5.999932016259E-02); +#244749 = AXIS2_PLACEMENT_3D('',#244750,#244751,#244752); +#244750 = CARTESIAN_POINT('',(130.44164932015,-44.62310067984,1.585)); +#244751 = DIRECTION('',(0.,0.,-1.)); +#244752 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#244753 = ORIENTED_EDGE('',*,*,#244754,.T.); +#244754 = EDGE_CURVE('',#244746,#244755,#244757,.T.); +#244755 = VERTEX_POINT('',#244756); +#244756 = CARTESIAN_POINT('',(130.38165,-43.9231,1.585)); +#244757 = LINE('',#244758,#244759); +#244758 = CARTESIAN_POINT('',(130.38165,-44.6231,1.585)); +#244759 = VECTOR('',#244760,1.); +#244760 = DIRECTION('',(0.,1.,0.)); +#244761 = ORIENTED_EDGE('',*,*,#244762,.T.); +#244762 = EDGE_CURVE('',#244755,#244763,#244765,.T.); +#244763 = VERTEX_POINT('',#244764); +#244764 = CARTESIAN_POINT('',(129.00165,-43.9231,1.585)); +#244765 = LINE('',#244766,#244767); +#244766 = CARTESIAN_POINT('',(130.38165,-43.9231,1.585)); +#244767 = VECTOR('',#244768,1.); +#244768 = DIRECTION('',(-1.,0.,0.)); +#244769 = ORIENTED_EDGE('',*,*,#244770,.T.); +#244770 = EDGE_CURVE('',#244763,#244771,#244773,.T.); +#244771 = VERTEX_POINT('',#244772); +#244772 = CARTESIAN_POINT('',(129.00165,-44.6231,1.585)); +#244773 = LINE('',#244774,#244775); +#244774 = CARTESIAN_POINT('',(129.00165,-43.9231,1.585)); +#244775 = VECTOR('',#244776,1.); +#244776 = DIRECTION('',(0.,-1.,0.)); +#244777 = ORIENTED_EDGE('',*,*,#244778,.T.); +#244778 = EDGE_CURVE('',#244771,#244779,#244781,.T.); +#244779 = VERTEX_POINT('',#244780); +#244780 = CARTESIAN_POINT('',(128.94165,-44.6831,1.585)); +#244781 = CIRCLE('',#244782,5.999932016262E-02); +#244782 = AXIS2_PLACEMENT_3D('',#244783,#244784,#244785); +#244783 = CARTESIAN_POINT('',(128.94165067984,-44.62310067984,1.585)); +#244784 = DIRECTION('',(0.,0.,-1.)); +#244785 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#244786 = ORIENTED_EDGE('',*,*,#244787,.T.); +#244787 = EDGE_CURVE('',#244779,#244612,#244788,.T.); +#244788 = LINE('',#244789,#244790); +#244789 = CARTESIAN_POINT('',(128.94165,-44.6831,1.585)); +#244790 = VECTOR('',#244791,1.); +#244791 = DIRECTION('',(-1.,0.,0.)); +#244792 = FACE_BOUND('',#244793,.F.); +#244793 = EDGE_LOOP('',(#244794,#244804,#244812,#244820)); +#244794 = ORIENTED_EDGE('',*,*,#244795,.T.); +#244795 = EDGE_CURVE('',#244796,#244798,#244800,.T.); +#244796 = VERTEX_POINT('',#244797); +#244797 = CARTESIAN_POINT('',(126.38165,-44.5631,1.585)); +#244798 = VERTEX_POINT('',#244799); +#244799 = CARTESIAN_POINT('',(126.38165,-43.9331,1.585)); +#244800 = LINE('',#244801,#244802); +#244801 = CARTESIAN_POINT('',(126.38165,-44.5631,1.585)); +#244802 = VECTOR('',#244803,1.); +#244803 = DIRECTION('',(0.,1.,0.)); +#244804 = ORIENTED_EDGE('',*,*,#244805,.T.); +#244805 = EDGE_CURVE('',#244798,#244806,#244808,.T.); +#244806 = VERTEX_POINT('',#244807); +#244807 = CARTESIAN_POINT('',(124.70165,-43.9331,1.585)); +#244808 = LINE('',#244809,#244810); +#244809 = CARTESIAN_POINT('',(126.38165,-43.9331,1.585)); +#244810 = VECTOR('',#244811,1.); +#244811 = DIRECTION('',(-1.,0.,0.)); +#244812 = ORIENTED_EDGE('',*,*,#244813,.T.); +#244813 = EDGE_CURVE('',#244806,#244814,#244816,.T.); +#244814 = VERTEX_POINT('',#244815); +#244815 = CARTESIAN_POINT('',(124.70165,-44.5631,1.585)); +#244816 = LINE('',#244817,#244818); +#244817 = CARTESIAN_POINT('',(124.70165,-43.9331,1.585)); +#244818 = VECTOR('',#244819,1.); +#244819 = DIRECTION('',(0.,-1.,0.)); +#244820 = ORIENTED_EDGE('',*,*,#244821,.T.); +#244821 = EDGE_CURVE('',#244814,#244796,#244822,.T.); +#244822 = LINE('',#244823,#244824); +#244823 = CARTESIAN_POINT('',(124.70165,-44.5631,1.585)); +#244824 = VECTOR('',#244825,1.); +#244825 = DIRECTION('',(1.,0.,0.)); +#244826 = FACE_BOUND('',#244827,.F.); +#244827 = EDGE_LOOP('',(#244828,#244838,#244846,#244854)); +#244828 = ORIENTED_EDGE('',*,*,#244829,.T.); +#244829 = EDGE_CURVE('',#244830,#244832,#244834,.T.); +#244830 = VERTEX_POINT('',#244831); +#244831 = CARTESIAN_POINT('',(128.88165,-44.5631,1.585)); +#244832 = VERTEX_POINT('',#244833); +#244833 = CARTESIAN_POINT('',(128.88165,-43.9331,1.585)); +#244834 = LINE('',#244835,#244836); +#244835 = CARTESIAN_POINT('',(128.88165,-44.5631,1.585)); +#244836 = VECTOR('',#244837,1.); +#244837 = DIRECTION('',(0.,1.,0.)); +#244838 = ORIENTED_EDGE('',*,*,#244839,.T.); +#244839 = EDGE_CURVE('',#244832,#244840,#244842,.T.); +#244840 = VERTEX_POINT('',#244841); +#244841 = CARTESIAN_POINT('',(128.00165,-43.9331,1.585)); +#244842 = LINE('',#244843,#244844); +#244843 = CARTESIAN_POINT('',(128.88165,-43.9331,1.585)); +#244844 = VECTOR('',#244845,1.); +#244845 = DIRECTION('',(-1.,0.,0.)); +#244846 = ORIENTED_EDGE('',*,*,#244847,.T.); +#244847 = EDGE_CURVE('',#244840,#244848,#244850,.T.); +#244848 = VERTEX_POINT('',#244849); +#244849 = CARTESIAN_POINT('',(128.00165,-44.5631,1.585)); +#244850 = LINE('',#244851,#244852); +#244851 = CARTESIAN_POINT('',(128.00165,-43.9331,1.585)); +#244852 = VECTOR('',#244853,1.); +#244853 = DIRECTION('',(0.,-1.,0.)); +#244854 = ORIENTED_EDGE('',*,*,#244855,.T.); +#244855 = EDGE_CURVE('',#244848,#244830,#244856,.T.); +#244856 = LINE('',#244857,#244858); +#244857 = CARTESIAN_POINT('',(128.00165,-44.5631,1.585)); +#244858 = VECTOR('',#244859,1.); +#244859 = DIRECTION('',(1.,0.,0.)); +#244860 = FACE_BOUND('',#244861,.F.); +#244861 = EDGE_LOOP('',(#244862,#244872,#244880,#244888)); +#244862 = ORIENTED_EDGE('',*,*,#244863,.T.); +#244863 = EDGE_CURVE('',#244864,#244866,#244868,.T.); +#244864 = VERTEX_POINT('',#244865); +#244865 = CARTESIAN_POINT('',(132.18165,-44.5631,1.585)); +#244866 = VERTEX_POINT('',#244867); +#244867 = CARTESIAN_POINT('',(132.18165,-43.9331,1.585)); +#244868 = LINE('',#244869,#244870); +#244869 = CARTESIAN_POINT('',(132.18165,-44.5631,1.585)); +#244870 = VECTOR('',#244871,1.); +#244871 = DIRECTION('',(0.,1.,0.)); +#244872 = ORIENTED_EDGE('',*,*,#244873,.T.); +#244873 = EDGE_CURVE('',#244866,#244874,#244876,.T.); +#244874 = VERTEX_POINT('',#244875); +#244875 = CARTESIAN_POINT('',(130.50165,-43.9331,1.585)); +#244876 = LINE('',#244877,#244878); +#244877 = CARTESIAN_POINT('',(132.18165,-43.9331,1.585)); +#244878 = VECTOR('',#244879,1.); +#244879 = DIRECTION('',(-1.,0.,0.)); +#244880 = ORIENTED_EDGE('',*,*,#244881,.T.); +#244881 = EDGE_CURVE('',#244874,#244882,#244884,.T.); +#244882 = VERTEX_POINT('',#244883); +#244883 = CARTESIAN_POINT('',(130.50165,-44.5631,1.585)); +#244884 = LINE('',#244885,#244886); +#244885 = CARTESIAN_POINT('',(130.50165,-43.9331,1.585)); +#244886 = VECTOR('',#244887,1.); +#244887 = DIRECTION('',(0.,-1.,0.)); +#244888 = ORIENTED_EDGE('',*,*,#244889,.T.); +#244889 = EDGE_CURVE('',#244882,#244864,#244890,.T.); +#244890 = LINE('',#244891,#244892); +#244891 = CARTESIAN_POINT('',(130.50165,-44.5631,1.585)); +#244892 = VECTOR('',#244893,1.); +#244893 = DIRECTION('',(1.,0.,0.)); +#244894 = PLANE('',#244895); +#244895 = AXIS2_PLACEMENT_3D('',#244896,#244897,#244898); +#244896 = CARTESIAN_POINT('',(0.,0.,1.585)); +#244897 = DIRECTION('',(0.,0.,1.)); +#244898 = DIRECTION('',(1.,0.,-0.)); +#244899 = SHELL_BASED_SURFACE_MODEL('',(#244900)); +#244900 = OPEN_SHELL('',(#244901)); +#244901 = ADVANCED_FACE('',(#244902,#244972,#245056,#245240,#245274, + #245308),#245342,.T.); +#244902 = FACE_BOUND('',#244903,.F.); +#244903 = EDGE_LOOP('',(#244904,#244915,#244923,#244932,#244940,#244949, + #244957,#244966)); +#244904 = ORIENTED_EDGE('',*,*,#244905,.T.); +#244905 = EDGE_CURVE('',#244906,#244908,#244910,.T.); +#244906 = VERTEX_POINT('',#244907); +#244907 = CARTESIAN_POINT('',(133.17165,-43.8631,1.585)); +#244908 = VERTEX_POINT('',#244909); +#244909 = CARTESIAN_POINT('',(133.23165,-43.8031,1.585)); +#244910 = CIRCLE('',#244911,5.999932016262E-02); +#244911 = AXIS2_PLACEMENT_3D('',#244912,#244913,#244914); +#244912 = CARTESIAN_POINT('',(133.23164932015,-43.86309932015,1.585)); +#244913 = DIRECTION('',(0.,0.,-1.)); +#244914 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#244915 = ORIENTED_EDGE('',*,*,#244916,.T.); +#244916 = EDGE_CURVE('',#244908,#244917,#244919,.T.); +#244917 = VERTEX_POINT('',#244918); +#244918 = CARTESIAN_POINT('',(140.85165,-43.8031,1.585)); +#244919 = LINE('',#244920,#244921); +#244920 = CARTESIAN_POINT('',(133.23165,-43.8031,1.585)); +#244921 = VECTOR('',#244922,1.); +#244922 = DIRECTION('',(1.,0.,0.)); +#244923 = ORIENTED_EDGE('',*,*,#244924,.T.); +#244924 = EDGE_CURVE('',#244917,#244925,#244927,.T.); +#244925 = VERTEX_POINT('',#244926); +#244926 = CARTESIAN_POINT('',(140.91165,-43.8631,1.585)); +#244927 = CIRCLE('',#244928,5.999932016261E-02); +#244928 = AXIS2_PLACEMENT_3D('',#244929,#244930,#244931); +#244929 = CARTESIAN_POINT('',(140.85165067984,-43.86309932015,1.585)); +#244930 = DIRECTION('',(0.,0.,-1.)); +#244931 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#244932 = ORIENTED_EDGE('',*,*,#244933,.T.); +#244933 = EDGE_CURVE('',#244925,#244934,#244936,.T.); +#244934 = VERTEX_POINT('',#244935); +#244935 = CARTESIAN_POINT('',(140.91165,-49.8331,1.585)); +#244936 = LINE('',#244937,#244938); +#244937 = CARTESIAN_POINT('',(140.91165,-43.8631,1.585)); +#244938 = VECTOR('',#244939,1.); +#244939 = DIRECTION('',(0.,-1.,0.)); +#244940 = ORIENTED_EDGE('',*,*,#244941,.T.); +#244941 = EDGE_CURVE('',#244934,#244942,#244944,.T.); +#244942 = VERTEX_POINT('',#244943); +#244943 = CARTESIAN_POINT('',(140.85165,-49.8931,1.585)); +#244944 = CIRCLE('',#244945,5.999932016262E-02); +#244945 = AXIS2_PLACEMENT_3D('',#244946,#244947,#244948); +#244946 = CARTESIAN_POINT('',(140.85165067984,-49.83310067984,1.585)); +#244947 = DIRECTION('',(0.,0.,-1.)); +#244948 = DIRECTION('',(0.999999999936,1.133081541087E-05,0.)); +#244949 = ORIENTED_EDGE('',*,*,#244950,.T.); +#244950 = EDGE_CURVE('',#244942,#244951,#244953,.T.); +#244951 = VERTEX_POINT('',#244952); +#244952 = CARTESIAN_POINT('',(133.23165,-49.8931,1.585)); +#244953 = LINE('',#244954,#244955); +#244954 = CARTESIAN_POINT('',(140.85165,-49.8931,1.585)); +#244955 = VECTOR('',#244956,1.); +#244956 = DIRECTION('',(-1.,0.,0.)); +#244957 = ORIENTED_EDGE('',*,*,#244958,.T.); +#244958 = EDGE_CURVE('',#244951,#244959,#244961,.T.); +#244959 = VERTEX_POINT('',#244960); +#244960 = CARTESIAN_POINT('',(133.17165,-49.8331,1.585)); +#244961 = CIRCLE('',#244962,5.999932016257E-02); +#244962 = AXIS2_PLACEMENT_3D('',#244963,#244964,#244965); +#244963 = CARTESIAN_POINT('',(133.23164932015,-49.83310067984,1.585)); +#244964 = DIRECTION('',(0.,0.,-1.)); +#244965 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#244966 = ORIENTED_EDGE('',*,*,#244967,.T.); +#244967 = EDGE_CURVE('',#244959,#244906,#244968,.T.); +#244968 = LINE('',#244969,#244970); +#244969 = CARTESIAN_POINT('',(133.17165,-49.8331,1.585)); +#244970 = VECTOR('',#244971,1.); +#244971 = DIRECTION('',(0.,1.,0.)); +#244972 = FACE_BOUND('',#244973,.F.); +#244973 = EDGE_LOOP('',(#244974,#244985,#244993,#245001,#245009,#245017, + #245025,#245033,#245041,#245050)); +#244974 = ORIENTED_EDGE('',*,*,#244975,.T.); +#244975 = EDGE_CURVE('',#244976,#244978,#244980,.T.); +#244976 = VERTEX_POINT('',#244977); +#244977 = CARTESIAN_POINT('',(133.99165,-49.1331,1.585)); +#244978 = VERTEX_POINT('',#244979); +#244979 = CARTESIAN_POINT('',(133.93165,-49.0731,1.585)); +#244980 = CIRCLE('',#244981,5.999932016261E-02); +#244981 = AXIS2_PLACEMENT_3D('',#244982,#244983,#244984); +#244982 = CARTESIAN_POINT('',(133.99164932015,-49.07310067984,1.585)); +#244983 = DIRECTION('',(0.,0.,-1.)); +#244984 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244985 = ORIENTED_EDGE('',*,*,#244986,.T.); +#244986 = EDGE_CURVE('',#244978,#244987,#244989,.T.); +#244987 = VERTEX_POINT('',#244988); +#244988 = CARTESIAN_POINT('',(133.93165,-46.1831,1.585)); +#244989 = LINE('',#244990,#244991); +#244990 = CARTESIAN_POINT('',(133.93165,-49.0731,1.585)); +#244991 = VECTOR('',#244992,1.); +#244992 = DIRECTION('',(0.,1.,0.)); +#244993 = ORIENTED_EDGE('',*,*,#244994,.T.); +#244994 = EDGE_CURVE('',#244987,#244995,#244997,.T.); +#244995 = VERTEX_POINT('',#244996); +#244996 = CARTESIAN_POINT('',(133.29165,-46.1831,1.585)); +#244997 = LINE('',#244998,#244999); +#244998 = CARTESIAN_POINT('',(133.93165,-46.1831,1.585)); +#244999 = VECTOR('',#245000,1.); +#245000 = DIRECTION('',(-1.,0.,0.)); +#245001 = ORIENTED_EDGE('',*,*,#245002,.T.); +#245002 = EDGE_CURVE('',#244995,#245003,#245005,.T.); +#245003 = VERTEX_POINT('',#245004); +#245004 = CARTESIAN_POINT('',(133.29165,-49.7731,1.585)); +#245005 = LINE('',#245006,#245007); +#245006 = CARTESIAN_POINT('',(133.29165,-46.1831,1.585)); +#245007 = VECTOR('',#245008,1.); +#245008 = DIRECTION('',(0.,-1.,0.)); +#245009 = ORIENTED_EDGE('',*,*,#245010,.T.); +#245010 = EDGE_CURVE('',#245003,#245011,#245013,.T.); +#245011 = VERTEX_POINT('',#245012); +#245012 = CARTESIAN_POINT('',(140.79165,-49.7731,1.585)); +#245013 = LINE('',#245014,#245015); +#245014 = CARTESIAN_POINT('',(133.29165,-49.7731,1.585)); +#245015 = VECTOR('',#245016,1.); +#245016 = DIRECTION('',(1.,0.,0.)); +#245017 = ORIENTED_EDGE('',*,*,#245018,.T.); +#245018 = EDGE_CURVE('',#245011,#245019,#245021,.T.); +#245019 = VERTEX_POINT('',#245020); +#245020 = CARTESIAN_POINT('',(140.79165,-46.1831,1.585)); +#245021 = LINE('',#245022,#245023); +#245022 = CARTESIAN_POINT('',(140.79165,-49.7731,1.585)); +#245023 = VECTOR('',#245024,1.); +#245024 = DIRECTION('',(0.,1.,0.)); +#245025 = ORIENTED_EDGE('',*,*,#245026,.T.); +#245026 = EDGE_CURVE('',#245019,#245027,#245029,.T.); +#245027 = VERTEX_POINT('',#245028); +#245028 = CARTESIAN_POINT('',(140.15165,-46.1831,1.585)); +#245029 = LINE('',#245030,#245031); +#245030 = CARTESIAN_POINT('',(140.79165,-46.1831,1.585)); +#245031 = VECTOR('',#245032,1.); +#245032 = DIRECTION('',(-1.,0.,0.)); +#245033 = ORIENTED_EDGE('',*,*,#245034,.T.); +#245034 = EDGE_CURVE('',#245027,#245035,#245037,.T.); +#245035 = VERTEX_POINT('',#245036); +#245036 = CARTESIAN_POINT('',(140.15165,-49.0731,1.585)); +#245037 = LINE('',#245038,#245039); +#245038 = CARTESIAN_POINT('',(140.15165,-46.1831,1.585)); +#245039 = VECTOR('',#245040,1.); +#245040 = DIRECTION('',(0.,-1.,0.)); +#245041 = ORIENTED_EDGE('',*,*,#245042,.T.); +#245042 = EDGE_CURVE('',#245035,#245043,#245045,.T.); +#245043 = VERTEX_POINT('',#245044); +#245044 = CARTESIAN_POINT('',(140.09165,-49.1331,1.585)); +#245045 = CIRCLE('',#245046,5.999932016253E-02); +#245046 = AXIS2_PLACEMENT_3D('',#245047,#245048,#245049); +#245047 = CARTESIAN_POINT('',(140.09165067984,-49.07310067984,1.585)); +#245048 = DIRECTION('',(0.,0.,-1.)); +#245049 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#245050 = ORIENTED_EDGE('',*,*,#245051,.T.); +#245051 = EDGE_CURVE('',#245043,#244976,#245052,.T.); +#245052 = LINE('',#245053,#245054); +#245053 = CARTESIAN_POINT('',(140.09165,-49.1331,1.585)); +#245054 = VECTOR('',#245055,1.); +#245055 = DIRECTION('',(-1.,0.,0.)); +#245056 = FACE_BOUND('',#245057,.F.); +#245057 = EDGE_LOOP('',(#245058,#245069,#245077,#245085,#245093,#245102, + #245110,#245118,#245126,#245135,#245143,#245151,#245159,#245168, + #245176,#245184,#245192,#245201,#245209,#245217,#245225,#245234)); +#245058 = ORIENTED_EDGE('',*,*,#245059,.T.); +#245059 = EDGE_CURVE('',#245060,#245062,#245064,.T.); +#245060 = VERTEX_POINT('',#245061); +#245061 = CARTESIAN_POINT('',(136.54165,-44.6831,1.585)); +#245062 = VERTEX_POINT('',#245063); +#245063 = CARTESIAN_POINT('',(136.48165,-44.6231,1.585)); +#245064 = CIRCLE('',#245065,5.999932016259E-02); +#245065 = AXIS2_PLACEMENT_3D('',#245066,#245067,#245068); +#245066 = CARTESIAN_POINT('',(136.54164932015,-44.62310067984,1.585)); +#245067 = DIRECTION('',(0.,0.,-1.)); +#245068 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#245069 = ORIENTED_EDGE('',*,*,#245070,.T.); +#245070 = EDGE_CURVE('',#245062,#245071,#245073,.T.); +#245071 = VERTEX_POINT('',#245072); +#245072 = CARTESIAN_POINT('',(136.48165,-43.9231,1.585)); +#245073 = LINE('',#245074,#245075); +#245074 = CARTESIAN_POINT('',(136.48165,-44.6231,1.585)); +#245075 = VECTOR('',#245076,1.); +#245076 = DIRECTION('',(0.,1.,0.)); +#245077 = ORIENTED_EDGE('',*,*,#245078,.T.); +#245078 = EDGE_CURVE('',#245071,#245079,#245081,.T.); +#245079 = VERTEX_POINT('',#245080); +#245080 = CARTESIAN_POINT('',(135.10165,-43.9231,1.585)); +#245081 = LINE('',#245082,#245083); +#245082 = CARTESIAN_POINT('',(136.48165,-43.9231,1.585)); +#245083 = VECTOR('',#245084,1.); +#245084 = DIRECTION('',(-1.,0.,0.)); +#245085 = ORIENTED_EDGE('',*,*,#245086,.T.); +#245086 = EDGE_CURVE('',#245079,#245087,#245089,.T.); +#245087 = VERTEX_POINT('',#245088); +#245088 = CARTESIAN_POINT('',(135.10165,-44.6231,1.585)); +#245089 = LINE('',#245090,#245091); +#245090 = CARTESIAN_POINT('',(135.10165,-43.9231,1.585)); +#245091 = VECTOR('',#245092,1.); +#245092 = DIRECTION('',(0.,-1.,0.)); +#245093 = ORIENTED_EDGE('',*,*,#245094,.T.); +#245094 = EDGE_CURVE('',#245087,#245095,#245097,.T.); +#245095 = VERTEX_POINT('',#245096); +#245096 = CARTESIAN_POINT('',(135.04165,-44.6831,1.585)); +#245097 = CIRCLE('',#245098,5.999932016262E-02); +#245098 = AXIS2_PLACEMENT_3D('',#245099,#245100,#245101); +#245099 = CARTESIAN_POINT('',(135.04165067984,-44.62310067984,1.585)); +#245100 = DIRECTION('',(0.,0.,-1.)); +#245101 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#245102 = ORIENTED_EDGE('',*,*,#245103,.T.); +#245103 = EDGE_CURVE('',#245095,#245104,#245106,.T.); +#245104 = VERTEX_POINT('',#245105); +#245105 = CARTESIAN_POINT('',(133.29165,-44.6831,1.585)); +#245106 = LINE('',#245107,#245108); +#245107 = CARTESIAN_POINT('',(135.04165,-44.6831,1.585)); +#245108 = VECTOR('',#245109,1.); +#245109 = DIRECTION('',(-1.,0.,0.)); +#245110 = ORIENTED_EDGE('',*,*,#245111,.T.); +#245111 = EDGE_CURVE('',#245104,#245112,#245114,.T.); +#245112 = VERTEX_POINT('',#245113); +#245113 = CARTESIAN_POINT('',(133.29165,-46.0631,1.585)); +#245114 = LINE('',#245115,#245116); +#245115 = CARTESIAN_POINT('',(133.29165,-44.6831,1.585)); +#245116 = VECTOR('',#245117,1.); +#245117 = DIRECTION('',(0.,-1.,0.)); +#245118 = ORIENTED_EDGE('',*,*,#245119,.T.); +#245119 = EDGE_CURVE('',#245112,#245120,#245122,.T.); +#245120 = VERTEX_POINT('',#245121); +#245121 = CARTESIAN_POINT('',(133.99165,-46.0631,1.585)); +#245122 = LINE('',#245123,#245124); +#245123 = CARTESIAN_POINT('',(133.29165,-46.0631,1.585)); +#245124 = VECTOR('',#245125,1.); +#245125 = DIRECTION('',(1.,0.,0.)); +#245126 = ORIENTED_EDGE('',*,*,#245127,.T.); +#245127 = EDGE_CURVE('',#245120,#245128,#245130,.T.); +#245128 = VERTEX_POINT('',#245129); +#245129 = CARTESIAN_POINT('',(134.05165,-46.1231,1.585)); +#245130 = CIRCLE('',#245131,5.999932016259E-02); +#245131 = AXIS2_PLACEMENT_3D('',#245132,#245133,#245134); +#245132 = CARTESIAN_POINT('',(133.99165067984,-46.12309932015,1.585)); +#245133 = DIRECTION('',(0.,0.,-1.)); +#245134 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#245135 = ORIENTED_EDGE('',*,*,#245136,.T.); +#245136 = EDGE_CURVE('',#245128,#245137,#245139,.T.); +#245137 = VERTEX_POINT('',#245138); +#245138 = CARTESIAN_POINT('',(134.05165,-49.0131,1.585)); +#245139 = LINE('',#245140,#245141); +#245140 = CARTESIAN_POINT('',(134.05165,-46.1231,1.585)); +#245141 = VECTOR('',#245142,1.); +#245142 = DIRECTION('',(0.,-1.,0.)); +#245143 = ORIENTED_EDGE('',*,*,#245144,.T.); +#245144 = EDGE_CURVE('',#245137,#245145,#245147,.T.); +#245145 = VERTEX_POINT('',#245146); +#245146 = CARTESIAN_POINT('',(140.03165,-49.0131,1.585)); +#245147 = LINE('',#245148,#245149); +#245148 = CARTESIAN_POINT('',(134.05165,-49.0131,1.585)); +#245149 = VECTOR('',#245150,1.); +#245150 = DIRECTION('',(1.,0.,0.)); +#245151 = ORIENTED_EDGE('',*,*,#245152,.T.); +#245152 = EDGE_CURVE('',#245145,#245153,#245155,.T.); +#245153 = VERTEX_POINT('',#245154); +#245154 = CARTESIAN_POINT('',(140.03165,-46.1231,1.585)); +#245155 = LINE('',#245156,#245157); +#245156 = CARTESIAN_POINT('',(140.03165,-49.0131,1.585)); +#245157 = VECTOR('',#245158,1.); +#245158 = DIRECTION('',(0.,1.,0.)); +#245159 = ORIENTED_EDGE('',*,*,#245160,.T.); +#245160 = EDGE_CURVE('',#245153,#245161,#245163,.T.); +#245161 = VERTEX_POINT('',#245162); +#245162 = CARTESIAN_POINT('',(140.09165,-46.0631,1.585)); +#245163 = CIRCLE('',#245164,5.999932016254E-02); +#245164 = AXIS2_PLACEMENT_3D('',#245165,#245166,#245167); +#245165 = CARTESIAN_POINT('',(140.09164932015,-46.12309932015,1.585)); +#245166 = DIRECTION('',(0.,0.,-1.)); +#245167 = DIRECTION('',(-0.999999999936,-1.133081683199E-05,-0.)); +#245168 = ORIENTED_EDGE('',*,*,#245169,.T.); +#245169 = EDGE_CURVE('',#245161,#245170,#245172,.T.); +#245170 = VERTEX_POINT('',#245171); +#245171 = CARTESIAN_POINT('',(140.79165,-46.0631,1.585)); +#245172 = LINE('',#245173,#245174); +#245173 = CARTESIAN_POINT('',(140.09165,-46.0631,1.585)); +#245174 = VECTOR('',#245175,1.); +#245175 = DIRECTION('',(1.,0.,0.)); +#245176 = ORIENTED_EDGE('',*,*,#245177,.T.); +#245177 = EDGE_CURVE('',#245170,#245178,#245180,.T.); +#245178 = VERTEX_POINT('',#245179); +#245179 = CARTESIAN_POINT('',(140.79165,-44.6831,1.585)); +#245180 = LINE('',#245181,#245182); +#245181 = CARTESIAN_POINT('',(140.79165,-46.0631,1.585)); +#245182 = VECTOR('',#245183,1.); +#245183 = DIRECTION('',(0.,1.,0.)); +#245184 = ORIENTED_EDGE('',*,*,#245185,.T.); +#245185 = EDGE_CURVE('',#245178,#245186,#245188,.T.); +#245186 = VERTEX_POINT('',#245187); +#245187 = CARTESIAN_POINT('',(139.04165,-44.6831,1.585)); +#245188 = LINE('',#245189,#245190); +#245189 = CARTESIAN_POINT('',(140.79165,-44.6831,1.585)); +#245190 = VECTOR('',#245191,1.); +#245191 = DIRECTION('',(-1.,0.,0.)); +#245192 = ORIENTED_EDGE('',*,*,#245193,.T.); +#245193 = EDGE_CURVE('',#245186,#245194,#245196,.T.); +#245194 = VERTEX_POINT('',#245195); +#245195 = CARTESIAN_POINT('',(138.98165,-44.6231,1.585)); +#245196 = CIRCLE('',#245197,5.999932016259E-02); +#245197 = AXIS2_PLACEMENT_3D('',#245198,#245199,#245200); +#245198 = CARTESIAN_POINT('',(139.04164932015,-44.62310067984,1.585)); +#245199 = DIRECTION('',(0.,0.,-1.)); +#245200 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#245201 = ORIENTED_EDGE('',*,*,#245202,.T.); +#245202 = EDGE_CURVE('',#245194,#245203,#245205,.T.); +#245203 = VERTEX_POINT('',#245204); +#245204 = CARTESIAN_POINT('',(138.98165,-43.9231,1.585)); +#245205 = LINE('',#245206,#245207); +#245206 = CARTESIAN_POINT('',(138.98165,-44.6231,1.585)); +#245207 = VECTOR('',#245208,1.); +#245208 = DIRECTION('',(0.,1.,0.)); +#245209 = ORIENTED_EDGE('',*,*,#245210,.T.); +#245210 = EDGE_CURVE('',#245203,#245211,#245213,.T.); +#245211 = VERTEX_POINT('',#245212); +#245212 = CARTESIAN_POINT('',(137.60165,-43.9231,1.585)); +#245213 = LINE('',#245214,#245215); +#245214 = CARTESIAN_POINT('',(138.98165,-43.9231,1.585)); +#245215 = VECTOR('',#245216,1.); +#245216 = DIRECTION('',(-1.,0.,0.)); +#245217 = ORIENTED_EDGE('',*,*,#245218,.T.); +#245218 = EDGE_CURVE('',#245211,#245219,#245221,.T.); +#245219 = VERTEX_POINT('',#245220); +#245220 = CARTESIAN_POINT('',(137.60165,-44.6231,1.585)); +#245221 = LINE('',#245222,#245223); +#245222 = CARTESIAN_POINT('',(137.60165,-43.9231,1.585)); +#245223 = VECTOR('',#245224,1.); +#245224 = DIRECTION('',(0.,-1.,0.)); +#245225 = ORIENTED_EDGE('',*,*,#245226,.T.); +#245226 = EDGE_CURVE('',#245219,#245227,#245229,.T.); +#245227 = VERTEX_POINT('',#245228); +#245228 = CARTESIAN_POINT('',(137.54165,-44.6831,1.585)); +#245229 = CIRCLE('',#245230,5.999932016262E-02); +#245230 = AXIS2_PLACEMENT_3D('',#245231,#245232,#245233); +#245231 = CARTESIAN_POINT('',(137.54165067984,-44.62310067984,1.585)); +#245232 = DIRECTION('',(0.,0.,-1.)); +#245233 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#245234 = ORIENTED_EDGE('',*,*,#245235,.T.); +#245235 = EDGE_CURVE('',#245227,#245060,#245236,.T.); +#245236 = LINE('',#245237,#245238); +#245237 = CARTESIAN_POINT('',(137.54165,-44.6831,1.585)); +#245238 = VECTOR('',#245239,1.); +#245239 = DIRECTION('',(-1.,0.,0.)); +#245240 = FACE_BOUND('',#245241,.F.); +#245241 = EDGE_LOOP('',(#245242,#245252,#245260,#245268)); +#245242 = ORIENTED_EDGE('',*,*,#245243,.T.); +#245243 = EDGE_CURVE('',#245244,#245246,#245248,.T.); +#245244 = VERTEX_POINT('',#245245); +#245245 = CARTESIAN_POINT('',(134.98165,-44.5631,1.585)); +#245246 = VERTEX_POINT('',#245247); +#245247 = CARTESIAN_POINT('',(134.98165,-43.9331,1.585)); +#245248 = LINE('',#245249,#245250); +#245249 = CARTESIAN_POINT('',(134.98165,-44.5631,1.585)); +#245250 = VECTOR('',#245251,1.); +#245251 = DIRECTION('',(0.,1.,0.)); +#245252 = ORIENTED_EDGE('',*,*,#245253,.T.); +#245253 = EDGE_CURVE('',#245246,#245254,#245256,.T.); +#245254 = VERTEX_POINT('',#245255); +#245255 = CARTESIAN_POINT('',(133.30165,-43.9331,1.585)); +#245256 = LINE('',#245257,#245258); +#245257 = CARTESIAN_POINT('',(134.98165,-43.9331,1.585)); +#245258 = VECTOR('',#245259,1.); +#245259 = DIRECTION('',(-1.,0.,0.)); +#245260 = ORIENTED_EDGE('',*,*,#245261,.T.); +#245261 = EDGE_CURVE('',#245254,#245262,#245264,.T.); +#245262 = VERTEX_POINT('',#245263); +#245263 = CARTESIAN_POINT('',(133.30165,-44.5631,1.585)); +#245264 = LINE('',#245265,#245266); +#245265 = CARTESIAN_POINT('',(133.30165,-43.9331,1.585)); +#245266 = VECTOR('',#245267,1.); +#245267 = DIRECTION('',(0.,-1.,0.)); +#245268 = ORIENTED_EDGE('',*,*,#245269,.T.); +#245269 = EDGE_CURVE('',#245262,#245244,#245270,.T.); +#245270 = LINE('',#245271,#245272); +#245271 = CARTESIAN_POINT('',(133.30165,-44.5631,1.585)); +#245272 = VECTOR('',#245273,1.); +#245273 = DIRECTION('',(1.,0.,0.)); +#245274 = FACE_BOUND('',#245275,.F.); +#245275 = EDGE_LOOP('',(#245276,#245286,#245294,#245302)); +#245276 = ORIENTED_EDGE('',*,*,#245277,.T.); +#245277 = EDGE_CURVE('',#245278,#245280,#245282,.T.); +#245278 = VERTEX_POINT('',#245279); +#245279 = CARTESIAN_POINT('',(137.48165,-44.5631,1.585)); +#245280 = VERTEX_POINT('',#245281); +#245281 = CARTESIAN_POINT('',(137.48165,-43.9331,1.585)); +#245282 = LINE('',#245283,#245284); +#245283 = CARTESIAN_POINT('',(137.48165,-44.5631,1.585)); +#245284 = VECTOR('',#245285,1.); +#245285 = DIRECTION('',(0.,1.,0.)); +#245286 = ORIENTED_EDGE('',*,*,#245287,.T.); +#245287 = EDGE_CURVE('',#245280,#245288,#245290,.T.); +#245288 = VERTEX_POINT('',#245289); +#245289 = CARTESIAN_POINT('',(136.60165,-43.9331,1.585)); +#245290 = LINE('',#245291,#245292); +#245291 = CARTESIAN_POINT('',(137.48165,-43.9331,1.585)); +#245292 = VECTOR('',#245293,1.); +#245293 = DIRECTION('',(-1.,0.,0.)); +#245294 = ORIENTED_EDGE('',*,*,#245295,.T.); +#245295 = EDGE_CURVE('',#245288,#245296,#245298,.T.); +#245296 = VERTEX_POINT('',#245297); +#245297 = CARTESIAN_POINT('',(136.60165,-44.5631,1.585)); +#245298 = LINE('',#245299,#245300); +#245299 = CARTESIAN_POINT('',(136.60165,-43.9331,1.585)); +#245300 = VECTOR('',#245301,1.); +#245301 = DIRECTION('',(0.,-1.,0.)); +#245302 = ORIENTED_EDGE('',*,*,#245303,.T.); +#245303 = EDGE_CURVE('',#245296,#245278,#245304,.T.); +#245304 = LINE('',#245305,#245306); +#245305 = CARTESIAN_POINT('',(136.60165,-44.5631,1.585)); +#245306 = VECTOR('',#245307,1.); +#245307 = DIRECTION('',(1.,0.,0.)); +#245308 = FACE_BOUND('',#245309,.F.); +#245309 = EDGE_LOOP('',(#245310,#245320,#245328,#245336)); +#245310 = ORIENTED_EDGE('',*,*,#245311,.T.); +#245311 = EDGE_CURVE('',#245312,#245314,#245316,.T.); +#245312 = VERTEX_POINT('',#245313); +#245313 = CARTESIAN_POINT('',(140.78165,-44.5631,1.585)); +#245314 = VERTEX_POINT('',#245315); +#245315 = CARTESIAN_POINT('',(140.78165,-43.9331,1.585)); +#245316 = LINE('',#245317,#245318); +#245317 = CARTESIAN_POINT('',(140.78165,-44.5631,1.585)); +#245318 = VECTOR('',#245319,1.); +#245319 = DIRECTION('',(0.,1.,0.)); +#245320 = ORIENTED_EDGE('',*,*,#245321,.T.); +#245321 = EDGE_CURVE('',#245314,#245322,#245324,.T.); +#245322 = VERTEX_POINT('',#245323); +#245323 = CARTESIAN_POINT('',(139.10165,-43.9331,1.585)); +#245324 = LINE('',#245325,#245326); +#245325 = CARTESIAN_POINT('',(140.78165,-43.9331,1.585)); +#245326 = VECTOR('',#245327,1.); +#245327 = DIRECTION('',(-1.,0.,0.)); +#245328 = ORIENTED_EDGE('',*,*,#245329,.T.); +#245329 = EDGE_CURVE('',#245322,#245330,#245332,.T.); +#245330 = VERTEX_POINT('',#245331); +#245331 = CARTESIAN_POINT('',(139.10165,-44.5631,1.585)); +#245332 = LINE('',#245333,#245334); +#245333 = CARTESIAN_POINT('',(139.10165,-43.9331,1.585)); +#245334 = VECTOR('',#245335,1.); +#245335 = DIRECTION('',(0.,-1.,0.)); +#245336 = ORIENTED_EDGE('',*,*,#245337,.T.); +#245337 = EDGE_CURVE('',#245330,#245312,#245338,.T.); +#245338 = LINE('',#245339,#245340); +#245339 = CARTESIAN_POINT('',(139.10165,-44.5631,1.585)); +#245340 = VECTOR('',#245341,1.); +#245341 = DIRECTION('',(1.,0.,0.)); +#245342 = PLANE('',#245343); +#245343 = AXIS2_PLACEMENT_3D('',#245344,#245345,#245346); +#245344 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245345 = DIRECTION('',(0.,0.,1.)); +#245346 = DIRECTION('',(1.,0.,-0.)); +#245347 = SHELL_BASED_SURFACE_MODEL('',(#245348)); +#245348 = OPEN_SHELL('',(#245349)); +#245349 = ADVANCED_FACE('',(#245350),#245493,.T.); +#245350 = FACE_BOUND('',#245351,.F.); +#245351 = EDGE_LOOP('',(#245352,#245362,#245370,#245378,#245387,#245395, + #245403,#245412,#245420,#245428,#245437,#245445,#245453,#245462, + #245470,#245479,#245487)); +#245352 = ORIENTED_EDGE('',*,*,#245353,.T.); +#245353 = EDGE_CURVE('',#245354,#245356,#245358,.T.); +#245354 = VERTEX_POINT('',#245355); +#245355 = CARTESIAN_POINT('',(84.389335,-48.470572,1.585)); +#245356 = VERTEX_POINT('',#245357); +#245357 = CARTESIAN_POINT('',(84.412175,-48.449656,1.585)); +#245358 = LINE('',#245359,#245360); +#245359 = CARTESIAN_POINT('',(84.389335,-48.470572,1.585)); +#245360 = VECTOR('',#245361,1.); +#245361 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#245362 = ORIENTED_EDGE('',*,*,#245363,.T.); +#245363 = EDGE_CURVE('',#245356,#245364,#245366,.T.); +#245364 = VERTEX_POINT('',#245365); +#245365 = CARTESIAN_POINT('',(84.441282,-48.439071,1.585)); +#245366 = LINE('',#245367,#245368); +#245367 = CARTESIAN_POINT('',(84.412175,-48.449656,1.585)); +#245368 = VECTOR('',#245369,1.); +#245369 = DIRECTION('',(0.939786824446,0.341761209907,0.)); +#245370 = ORIENTED_EDGE('',*,*,#245371,.T.); +#245371 = EDGE_CURVE('',#245364,#245372,#245374,.T.); +#245372 = VERTEX_POINT('',#245373); +#245373 = CARTESIAN_POINT('',(84.455046,-48.439676,1.585)); +#245374 = LINE('',#245375,#245376); +#245375 = CARTESIAN_POINT('',(84.441282,-48.439071,1.585)); +#245376 = VECTOR('',#245377,1.); +#245377 = DIRECTION('',(0.99903536577,-4.39128448337E-02,0.)); +#245378 = ORIENTED_EDGE('',*,*,#245379,.T.); +#245379 = EDGE_CURVE('',#245372,#245380,#245382,.T.); +#245380 = VERTEX_POINT('',#245381); +#245381 = CARTESIAN_POINT('',(84.525908,-48.489307,1.585)); +#245382 = CIRCLE('',#245383,7.786403695727E-02); +#245383 = AXIS2_PLACEMENT_3D('',#245384,#245385,#245386); +#245384 = CARTESIAN_POINT('',(84.453335522407,-48.51752124723,1.585)); +#245385 = DIRECTION('',(0.,0.,-1.)); +#245386 = DIRECTION('',(2.196749179859E-02,0.999758685536,0.)); +#245387 = ORIENTED_EDGE('',*,*,#245388,.T.); +#245388 = EDGE_CURVE('',#245380,#245389,#245391,.T.); +#245389 = VERTEX_POINT('',#245390); +#245390 = CARTESIAN_POINT('',(84.532708,-48.517526,1.585)); +#245391 = LINE('',#245392,#245393); +#245392 = CARTESIAN_POINT('',(84.525908,-48.489307,1.585)); +#245393 = VECTOR('',#245394,1.); +#245394 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#245395 = ORIENTED_EDGE('',*,*,#245396,.T.); +#245396 = EDGE_CURVE('',#245389,#245397,#245399,.T.); +#245397 = VERTEX_POINT('',#245398); +#245398 = CARTESIAN_POINT('',(84.531183,-49.803011,1.585)); +#245399 = LINE('',#245400,#245401); +#245400 = CARTESIAN_POINT('',(84.532708,-48.517526,1.585)); +#245401 = VECTOR('',#245402,1.); +#245402 = DIRECTION('',(-1.186321837197E-03,-0.99999929632,0.)); +#245403 = ORIENTED_EDGE('',*,*,#245404,.T.); +#245404 = EDGE_CURVE('',#245397,#245405,#245407,.T.); +#245405 = VERTEX_POINT('',#245406); +#245406 = CARTESIAN_POINT('',(84.375483,-49.803011,1.585)); +#245407 = CIRCLE('',#245408,7.937510771646E-02); +#245408 = AXIS2_PLACEMENT_3D('',#245409,#245410,#245411); +#245409 = CARTESIAN_POINT('',(84.453333,-49.787526,1.585)); +#245410 = DIRECTION('',(-0.,0.,-1.)); +#245411 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245412 = ORIENTED_EDGE('',*,*,#245413,.T.); +#245413 = EDGE_CURVE('',#245405,#245414,#245416,.T.); +#245414 = VERTEX_POINT('',#245415); +#245415 = CARTESIAN_POINT('',(84.373958,-48.875314,1.585)); +#245416 = LINE('',#245417,#245418); +#245417 = CARTESIAN_POINT('',(84.375483,-49.803011,1.585)); +#245418 = VECTOR('',#245419,1.); +#245419 = DIRECTION('',(-1.643853477515E-03,0.999998648872,0.)); +#245420 = ORIENTED_EDGE('',*,*,#245421,.T.); +#245421 = EDGE_CURVE('',#245414,#245422,#245424,.T.); +#245422 = VERTEX_POINT('',#245423); +#245423 = CARTESIAN_POINT('',(84.093998,-49.471623,1.585)); +#245424 = LINE('',#245425,#245426); +#245425 = CARTESIAN_POINT('',(84.373958,-48.875314,1.585)); +#245426 = VECTOR('',#245427,1.); +#245427 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#245428 = ORIENTED_EDGE('',*,*,#245429,.T.); +#245429 = EDGE_CURVE('',#245422,#245430,#245432,.T.); +#245430 = VERTEX_POINT('',#245431); +#245431 = CARTESIAN_POINT('',(83.958072,-49.458235,1.585)); +#245432 = CIRCLE('',#245433,7.937464557818E-02); +#245433 = AXIS2_PLACEMENT_3D('',#245434,#245435,#245436); +#245434 = CARTESIAN_POINT('',(84.030000355023,-49.42466945063,1.585)); +#245435 = DIRECTION('',(-0.,0.,-1.)); +#245436 = DIRECTION('',(0.806273143147,-0.591543420755,-0.)); +#245437 = ORIENTED_EDGE('',*,*,#245438,.T.); +#245438 = EDGE_CURVE('',#245430,#245439,#245441,.T.); +#245439 = VERTEX_POINT('',#245440); +#245440 = CARTESIAN_POINT('',(83.686041,-48.875312,1.585)); +#245441 = LINE('',#245442,#245443); +#245442 = CARTESIAN_POINT('',(83.958072,-49.458235,1.585)); +#245443 = VECTOR('',#245444,1.); +#245444 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#245445 = ORIENTED_EDGE('',*,*,#245446,.T.); +#245446 = EDGE_CURVE('',#245439,#245447,#245449,.T.); +#245447 = VERTEX_POINT('',#245448); +#245448 = CARTESIAN_POINT('',(83.684516,-49.803011,1.585)); +#245449 = LINE('',#245450,#245451); +#245450 = CARTESIAN_POINT('',(83.686041,-48.875312,1.585)); +#245451 = VECTOR('',#245452,1.); +#245452 = DIRECTION('',(-1.643849933588E-03,-0.999998648878,0.)); +#245453 = ORIENTED_EDGE('',*,*,#245454,.T.); +#245454 = EDGE_CURVE('',#245447,#245455,#245457,.T.); +#245455 = VERTEX_POINT('',#245456); +#245456 = CARTESIAN_POINT('',(83.528816,-49.803011,1.585)); +#245457 = CIRCLE('',#245458,7.937510771646E-02); +#245458 = AXIS2_PLACEMENT_3D('',#245459,#245460,#245461); +#245459 = CARTESIAN_POINT('',(83.606666,-49.787526,1.585)); +#245460 = DIRECTION('',(-0.,0.,-1.)); +#245461 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245462 = ORIENTED_EDGE('',*,*,#245463,.T.); +#245463 = EDGE_CURVE('',#245455,#245464,#245466,.T.); +#245464 = VERTEX_POINT('',#245465); +#245465 = CARTESIAN_POINT('',(83.528816,-48.502041,1.585)); +#245466 = LINE('',#245467,#245468); +#245467 = CARTESIAN_POINT('',(83.528816,-49.803011,1.585)); +#245468 = VECTOR('',#245469,1.); +#245469 = DIRECTION('',(0.,1.,0.)); +#245470 = ORIENTED_EDGE('',*,*,#245471,.T.); +#245471 = EDGE_CURVE('',#245464,#245472,#245474,.T.); +#245472 = VERTEX_POINT('',#245473); +#245473 = CARTESIAN_POINT('',(83.678594,-48.483959,1.585)); +#245474 = CIRCLE('',#245475,7.937498694708E-02); +#245475 = AXIS2_PLACEMENT_3D('',#245476,#245477,#245478); +#245476 = CARTESIAN_POINT('',(83.606665897294,-48.51752589729,1.585)); +#245477 = DIRECTION('',(0.,0.,-1.)); +#245478 = DIRECTION('',(-0.980786268925,0.195085352318,0.)); +#245479 = ORIENTED_EDGE('',*,*,#245480,.T.); +#245480 = EDGE_CURVE('',#245472,#245481,#245483,.T.); +#245481 = VERTEX_POINT('',#245482); +#245482 = CARTESIAN_POINT('',(84.029999,-49.23697,1.585)); +#245483 = LINE('',#245484,#245485); +#245484 = CARTESIAN_POINT('',(83.678594,-48.483959,1.585)); +#245485 = VECTOR('',#245486,1.); +#245486 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#245487 = ORIENTED_EDGE('',*,*,#245488,.T.); +#245488 = EDGE_CURVE('',#245481,#245354,#245489,.T.); +#245489 = LINE('',#245490,#245491); +#245490 = CARTESIAN_POINT('',(84.029999,-49.23697,1.585)); +#245491 = VECTOR('',#245492,1.); +#245492 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#245493 = PLANE('',#245494); +#245494 = AXIS2_PLACEMENT_3D('',#245495,#245496,#245497); +#245495 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245496 = DIRECTION('',(0.,0.,1.)); +#245497 = DIRECTION('',(1.,0.,-0.)); +#245498 = SHELL_BASED_SURFACE_MODEL('',(#245499)); +#245499 = OPEN_SHELL('',(#245500)); +#245500 = ADVANCED_FACE('',(#245501),#245619,.T.); +#245501 = FACE_BOUND('',#245502,.F.); +#245502 = EDGE_LOOP('',(#245503,#245514,#245522,#245530,#245538,#245547, + #245555,#245564,#245572,#245580,#245588,#245597,#245605,#245613)); +#245503 = ORIENTED_EDGE('',*,*,#245504,.T.); +#245504 = EDGE_CURVE('',#245505,#245507,#245509,.T.); +#245505 = VERTEX_POINT('',#245506); +#245506 = CARTESIAN_POINT('',(85.013997,-48.451528,1.585)); +#245507 = VERTEX_POINT('',#245508); +#245508 = CARTESIAN_POINT('',(85.135945,-48.502041,1.585)); +#245509 = CIRCLE('',#245510,7.937518132319E-02); +#245510 = AXIS2_PLACEMENT_3D('',#245511,#245512,#245513); +#245511 = CARTESIAN_POINT('',(85.058095,-48.51752637729,1.585)); +#245512 = DIRECTION('',(0.,0.,-1.)); +#245513 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#245514 = ORIENTED_EDGE('',*,*,#245515,.T.); +#245515 = EDGE_CURVE('',#245507,#245516,#245518,.T.); +#245516 = VERTEX_POINT('',#245517); +#245517 = CARTESIAN_POINT('',(85.13747,-49.042913,1.585)); +#245518 = LINE('',#245519,#245520); +#245519 = CARTESIAN_POINT('',(85.135945,-48.502041,1.585)); +#245520 = VECTOR('',#245521,1.); +#245521 = DIRECTION('',(2.81950986255E-03,-0.999996025174,0.)); +#245522 = ORIENTED_EDGE('',*,*,#245523,.T.); +#245523 = EDGE_CURVE('',#245516,#245524,#245526,.T.); +#245524 = VERTEX_POINT('',#245525); +#245525 = CARTESIAN_POINT('',(85.704435,-49.042913,1.585)); +#245526 = LINE('',#245527,#245528); +#245527 = CARTESIAN_POINT('',(85.13747,-49.042913,1.585)); +#245528 = VECTOR('',#245529,1.); +#245529 = DIRECTION('',(1.,0.,0.)); +#245530 = ORIENTED_EDGE('',*,*,#245531,.T.); +#245531 = EDGE_CURVE('',#245524,#245532,#245534,.T.); +#245532 = VERTEX_POINT('',#245533); +#245533 = CARTESIAN_POINT('',(85.70596,-48.502041,1.585)); +#245534 = LINE('',#245535,#245536); +#245535 = CARTESIAN_POINT('',(85.704435,-49.042913,1.585)); +#245536 = VECTOR('',#245537,1.); +#245537 = DIRECTION('',(2.819509862577E-03,0.999996025174,0.)); +#245538 = ORIENTED_EDGE('',*,*,#245539,.T.); +#245539 = EDGE_CURVE('',#245532,#245540,#245542,.T.); +#245540 = VERTEX_POINT('',#245541); +#245541 = CARTESIAN_POINT('',(85.86166,-48.502041,1.585)); +#245542 = CIRCLE('',#245543,7.937510771646E-02); +#245543 = AXIS2_PLACEMENT_3D('',#245544,#245545,#245546); +#245544 = CARTESIAN_POINT('',(85.78381,-48.517526,1.585)); +#245545 = DIRECTION('',(0.,0.,-1.)); +#245546 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#245547 = ORIENTED_EDGE('',*,*,#245548,.T.); +#245548 = EDGE_CURVE('',#245540,#245549,#245551,.T.); +#245549 = VERTEX_POINT('',#245550); +#245550 = CARTESIAN_POINT('',(85.86166,-49.803011,1.585)); +#245551 = LINE('',#245552,#245553); +#245552 = CARTESIAN_POINT('',(85.86166,-48.502041,1.585)); +#245553 = VECTOR('',#245554,1.); +#245554 = DIRECTION('',(0.,-1.,0.)); +#245555 = ORIENTED_EDGE('',*,*,#245556,.T.); +#245556 = EDGE_CURVE('',#245549,#245557,#245559,.T.); +#245557 = VERTEX_POINT('',#245558); +#245558 = CARTESIAN_POINT('',(85.70596,-49.803011,1.585)); +#245559 = CIRCLE('',#245560,7.937510771646E-02); +#245560 = AXIS2_PLACEMENT_3D('',#245561,#245562,#245563); +#245561 = CARTESIAN_POINT('',(85.78381,-49.787526,1.585)); +#245562 = DIRECTION('',(-0.,0.,-1.)); +#245563 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245564 = ORIENTED_EDGE('',*,*,#245565,.T.); +#245565 = EDGE_CURVE('',#245557,#245566,#245568,.T.); +#245566 = VERTEX_POINT('',#245567); +#245567 = CARTESIAN_POINT('',(85.704435,-49.201663,1.585)); +#245568 = LINE('',#245569,#245570); +#245569 = CARTESIAN_POINT('',(85.70596,-49.803011,1.585)); +#245570 = VECTOR('',#245571,1.); +#245571 = DIRECTION('',(-2.535961034676E-03,0.999996784446,0.)); +#245572 = ORIENTED_EDGE('',*,*,#245573,.T.); +#245573 = EDGE_CURVE('',#245566,#245574,#245576,.T.); +#245574 = VERTEX_POINT('',#245575); +#245575 = CARTESIAN_POINT('',(85.13747,-49.201663,1.585)); +#245576 = LINE('',#245577,#245578); +#245577 = CARTESIAN_POINT('',(85.704435,-49.201663,1.585)); +#245578 = VECTOR('',#245579,1.); +#245579 = DIRECTION('',(-1.,0.,0.)); +#245580 = ORIENTED_EDGE('',*,*,#245581,.T.); +#245581 = EDGE_CURVE('',#245574,#245582,#245584,.T.); +#245582 = VERTEX_POINT('',#245583); +#245583 = CARTESIAN_POINT('',(85.135945,-49.803011,1.585)); +#245584 = LINE('',#245585,#245586); +#245585 = CARTESIAN_POINT('',(85.13747,-49.201663,1.585)); +#245586 = VECTOR('',#245587,1.); +#245587 = DIRECTION('',(-2.535961034653E-03,-0.999996784446,0.)); +#245588 = ORIENTED_EDGE('',*,*,#245589,.T.); +#245589 = EDGE_CURVE('',#245582,#245590,#245592,.T.); +#245590 = VERTEX_POINT('',#245591); +#245591 = CARTESIAN_POINT('',(84.980245,-49.803011,1.585)); +#245592 = CIRCLE('',#245593,7.937510771646E-02); +#245593 = AXIS2_PLACEMENT_3D('',#245594,#245595,#245596); +#245594 = CARTESIAN_POINT('',(85.058095,-49.787526,1.585)); +#245595 = DIRECTION('',(-0.,0.,-1.)); +#245596 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245597 = ORIENTED_EDGE('',*,*,#245598,.T.); +#245598 = EDGE_CURVE('',#245590,#245599,#245601,.T.); +#245599 = VERTEX_POINT('',#245600); +#245600 = CARTESIAN_POINT('',(84.980245,-48.502041,1.585)); +#245601 = LINE('',#245602,#245603); +#245602 = CARTESIAN_POINT('',(84.980245,-49.803011,1.585)); +#245603 = VECTOR('',#245604,1.); +#245604 = DIRECTION('',(0.,1.,0.)); +#245605 = ORIENTED_EDGE('',*,*,#245606,.T.); +#245606 = EDGE_CURVE('',#245599,#245607,#245609,.T.); +#245607 = VERTEX_POINT('',#245608); +#245608 = CARTESIAN_POINT('',(84.992097,-48.473428,1.585)); +#245609 = LINE('',#245610,#245611); +#245610 = CARTESIAN_POINT('',(84.980245,-48.502041,1.585)); +#245611 = VECTOR('',#245612,1.); +#245612 = DIRECTION('',(0.382686390668,0.923878307137,0.)); +#245613 = ORIENTED_EDGE('',*,*,#245614,.T.); +#245614 = EDGE_CURVE('',#245607,#245505,#245615,.T.); +#245615 = LINE('',#245616,#245617); +#245616 = CARTESIAN_POINT('',(84.992097,-48.473428,1.585)); +#245617 = VECTOR('',#245618,1.); +#245618 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#245619 = PLANE('',#245620); +#245620 = AXIS2_PLACEMENT_3D('',#245621,#245622,#245623); +#245621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245622 = DIRECTION('',(0.,0.,1.)); +#245623 = DIRECTION('',(1.,0.,-0.)); +#245624 = SHELL_BASED_SURFACE_MODEL('',(#245625)); +#245625 = OPEN_SHELL('',(#245626)); +#245626 = ADVANCED_FACE('',(#245627),#245761,.T.); +#245627 = FACE_BOUND('',#245628,.F.); +#245628 = EDGE_LOOP('',(#245629,#245640,#245648,#245656,#245664,#245672, + #245681,#245689,#245698,#245706,#245714,#245722,#245730,#245739, + #245747,#245755)); +#245629 = ORIENTED_EDGE('',*,*,#245630,.T.); +#245630 = EDGE_CURVE('',#245631,#245633,#245635,.T.); +#245631 = VERTEX_POINT('',#245632); +#245632 = CARTESIAN_POINT('',(86.634766,-48.461459,1.585)); +#245633 = VERTEX_POINT('',#245634); +#245634 = CARTESIAN_POINT('',(86.73505,-48.451528,1.585)); +#245635 = CIRCLE('',#245636,8.40177865168E-02); +#245636 = AXIS2_PLACEMENT_3D('',#245637,#245638,#245639); +#245637 = CARTESIAN_POINT('',(86.691533471855,-48.52339802316,1.585)); +#245638 = DIRECTION('',(0.,0.,-1.)); +#245639 = DIRECTION('',(-0.675660169218,0.737213222706,0.)); +#245640 = ORIENTED_EDGE('',*,*,#245641,.T.); +#245641 = EDGE_CURVE('',#245633,#245642,#245644,.T.); +#245642 = VERTEX_POINT('',#245643); +#245643 = CARTESIAN_POINT('',(86.759926,-48.480612,1.585)); +#245644 = LINE('',#245645,#245646); +#245645 = CARTESIAN_POINT('',(86.73505,-48.451528,1.585)); +#245646 = VECTOR('',#245647,1.); +#245647 = DIRECTION('',(0.649990535358,-0.759942303037,0.)); +#245648 = ORIENTED_EDGE('',*,*,#245649,.T.); +#245649 = EDGE_CURVE('',#245642,#245650,#245652,.T.); +#245650 = VERTEX_POINT('',#245651); +#245651 = CARTESIAN_POINT('',(86.770327,-48.517526,1.585)); +#245652 = LINE('',#245653,#245654); +#245653 = CARTESIAN_POINT('',(86.759926,-48.480612,1.585)); +#245654 = VECTOR('',#245655,1.); +#245655 = DIRECTION('',(0.27120313993,-0.962522133196,0.)); +#245656 = ORIENTED_EDGE('',*,*,#245657,.T.); +#245657 = EDGE_CURVE('',#245650,#245658,#245660,.T.); +#245658 = VERTEX_POINT('',#245659); +#245659 = CARTESIAN_POINT('',(86.770327,-49.708151,1.585)); +#245660 = LINE('',#245661,#245662); +#245661 = CARTESIAN_POINT('',(86.770327,-48.517526,1.585)); +#245662 = VECTOR('',#245663,1.); +#245663 = DIRECTION('',(0.,-1.,0.)); +#245664 = ORIENTED_EDGE('',*,*,#245665,.T.); +#245665 = EDGE_CURVE('',#245658,#245666,#245668,.T.); +#245666 = VERTEX_POINT('',#245667); +#245667 = CARTESIAN_POINT('',(87.069295,-49.709676,1.585)); +#245668 = LINE('',#245669,#245670); +#245669 = CARTESIAN_POINT('',(86.770327,-49.708151,1.585)); +#245670 = VECTOR('',#245671,1.); +#245671 = DIRECTION('',(0.999986990764,-5.100814003222E-03,0.)); +#245672 = ORIENTED_EDGE('',*,*,#245673,.T.); +#245673 = EDGE_CURVE('',#245666,#245674,#245676,.T.); +#245674 = VERTEX_POINT('',#245675); +#245675 = CARTESIAN_POINT('',(87.069295,-49.865376,1.585)); +#245676 = CIRCLE('',#245677,7.937510771646E-02); +#245677 = AXIS2_PLACEMENT_3D('',#245678,#245679,#245680); +#245678 = CARTESIAN_POINT('',(87.05381,-49.787526,1.585)); +#245679 = DIRECTION('',(0.,0.,-1.)); +#245680 = DIRECTION('',(0.19508634943,0.980786070591,0.)); +#245681 = ORIENTED_EDGE('',*,*,#245682,.T.); +#245682 = EDGE_CURVE('',#245674,#245683,#245685,.T.); +#245683 = VERTEX_POINT('',#245684); +#245684 = CARTESIAN_POINT('',(86.31261,-49.865376,1.585)); +#245685 = LINE('',#245686,#245687); +#245686 = CARTESIAN_POINT('',(87.069295,-49.865376,1.585)); +#245687 = VECTOR('',#245688,1.); +#245688 = DIRECTION('',(-1.,0.,0.)); +#245689 = ORIENTED_EDGE('',*,*,#245690,.T.); +#245690 = EDGE_CURVE('',#245683,#245691,#245693,.T.); +#245691 = VERTEX_POINT('',#245692); +#245692 = CARTESIAN_POINT('',(86.31261,-49.709676,1.585)); +#245693 = CIRCLE('',#245694,7.937510771646E-02); +#245694 = AXIS2_PLACEMENT_3D('',#245695,#245696,#245697); +#245695 = CARTESIAN_POINT('',(86.328095,-49.787526,1.585)); +#245696 = DIRECTION('',(0.,0.,-1.)); +#245697 = DIRECTION('',(-0.19508634943,-0.980786070591,-0.)); +#245698 = ORIENTED_EDGE('',*,*,#245699,.T.); +#245699 = EDGE_CURVE('',#245691,#245700,#245702,.T.); +#245700 = VERTEX_POINT('',#245701); +#245701 = CARTESIAN_POINT('',(86.611577,-49.708151,1.585)); +#245702 = LINE('',#245703,#245704); +#245703 = CARTESIAN_POINT('',(86.31261,-49.709676,1.585)); +#245704 = VECTOR('',#245705,1.); +#245705 = DIRECTION('',(0.999986990677,5.10083106424E-03,0.)); +#245706 = ORIENTED_EDGE('',*,*,#245707,.T.); +#245707 = EDGE_CURVE('',#245700,#245708,#245710,.T.); +#245708 = VERTEX_POINT('',#245709); +#245709 = CARTESIAN_POINT('',(86.611577,-48.76963,1.585)); +#245710 = LINE('',#245711,#245712); +#245711 = CARTESIAN_POINT('',(86.611577,-49.708151,1.585)); +#245712 = VECTOR('',#245713,1.); +#245713 = DIRECTION('',(0.,1.,0.)); +#245714 = ORIENTED_EDGE('',*,*,#245715,.T.); +#245715 = EDGE_CURVE('',#245708,#245716,#245718,.T.); +#245716 = VERTEX_POINT('',#245717); +#245717 = CARTESIAN_POINT('',(86.491206,-48.886708,1.585)); +#245718 = LINE('',#245719,#245720); +#245719 = CARTESIAN_POINT('',(86.611577,-48.76963,1.585)); +#245720 = VECTOR('',#245721,1.); +#245721 = DIRECTION('',(-0.716844177238,-0.697233408235,0.)); +#245722 = ORIENTED_EDGE('',*,*,#245723,.T.); +#245723 = EDGE_CURVE('',#245716,#245724,#245726,.T.); +#245724 = VERTEX_POINT('',#245725); +#245725 = CARTESIAN_POINT('',(86.34906,-48.956939,1.585)); +#245726 = LINE('',#245727,#245728); +#245727 = CARTESIAN_POINT('',(86.491206,-48.886708,1.585)); +#245728 = VECTOR('',#245729,1.); +#245729 = DIRECTION('',(-0.896541361207,-0.442960029399,0.)); +#245730 = ORIENTED_EDGE('',*,*,#245731,.T.); +#245731 = EDGE_CURVE('',#245724,#245732,#245734,.T.); +#245732 = VERTEX_POINT('',#245733); +#245733 = CARTESIAN_POINT('',(86.279429,-48.817677,1.585)); +#245734 = CIRCLE('',#245735,7.937491299082E-02); +#245735 = AXIS2_PLACEMENT_3D('',#245736,#245737,#245738); +#245736 = CARTESIAN_POINT('',(86.32809460068,-48.88038294966,1.585)); +#245737 = DIRECTION('',(0.,0.,-1.)); +#245738 = DIRECTION('',(0.264131304593,-0.964486730823,0.)); +#245739 = ORIENTED_EDGE('',*,*,#245740,.T.); +#245740 = EDGE_CURVE('',#245732,#245741,#245743,.T.); +#245741 = VERTEX_POINT('',#245742); +#245742 = CARTESIAN_POINT('',(86.402029,-48.754672,1.585)); +#245743 = LINE('',#245744,#245745); +#245744 = CARTESIAN_POINT('',(86.279429,-48.817677,1.585)); +#245745 = VECTOR('',#245746,1.); +#245746 = DIRECTION('',(0.88942475379,0.457081620004,0.)); +#245747 = ORIENTED_EDGE('',*,*,#245748,.T.); +#245748 = EDGE_CURVE('',#245741,#245749,#245751,.T.); +#245749 = VERTEX_POINT('',#245750); +#245750 = CARTESIAN_POINT('',(86.508317,-48.648382,1.585)); +#245751 = LINE('',#245752,#245753); +#245752 = CARTESIAN_POINT('',(86.402029,-48.754672,1.585)); +#245753 = VECTOR('',#245754,1.); +#245754 = DIRECTION('',(0.707100128475,0.707113433836,0.)); +#245755 = ORIENTED_EDGE('',*,*,#245756,.T.); +#245756 = EDGE_CURVE('',#245749,#245631,#245757,.T.); +#245757 = LINE('',#245758,#245759); +#245758 = CARTESIAN_POINT('',(86.508317,-48.648382,1.585)); +#245759 = VECTOR('',#245760,1.); +#245760 = DIRECTION('',(0.56031267593,0.828281175201,0.)); +#245761 = PLANE('',#245762); +#245762 = AXIS2_PLACEMENT_3D('',#245763,#245764,#245765); +#245763 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245764 = DIRECTION('',(0.,0.,1.)); +#245765 = DIRECTION('',(1.,0.,-0.)); +#245766 = SHELL_BASED_SURFACE_MODEL('',(#245767)); +#245767 = OPEN_SHELL('',(#245768)); +#245768 = ADVANCED_FACE('',(#245769),#245918,.T.); +#245769 = FACE_BOUND('',#245770,.F.); +#245770 = EDGE_LOOP('',(#245771,#245782,#245790,#245798,#245806,#245814, + #245822,#245830,#245838,#245846,#245854,#245862,#245870,#245879, + #245887,#245895,#245903,#245912)); +#245771 = ORIENTED_EDGE('',*,*,#245772,.T.); +#245772 = EDGE_CURVE('',#245773,#245775,#245777,.T.); +#245773 = VERTEX_POINT('',#245774); +#245774 = CARTESIAN_POINT('',(179.493823,-48.978456,1.585)); +#245775 = VERTEX_POINT('',#245776); +#245776 = CARTESIAN_POINT('',(180.003218,-48.987786,1.585)); +#245777 = CIRCLE('',#245778,0.450326844012); +#245778 = AXIS2_PLACEMENT_3D('',#245779,#245780,#245781); +#245779 = CARTESIAN_POINT('',(179.7417200301,-49.35440989199,1.585)); +#245780 = DIRECTION('',(0.,0.,-1.)); +#245781 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#245782 = ORIENTED_EDGE('',*,*,#245783,.T.); +#245783 = EDGE_CURVE('',#245775,#245784,#245786,.T.); +#245784 = VERTEX_POINT('',#245785); +#245785 = CARTESIAN_POINT('',(180.066671,-49.053316,1.585)); +#245786 = LINE('',#245787,#245788); +#245787 = CARTESIAN_POINT('',(180.003218,-48.987786,1.585)); +#245788 = VECTOR('',#245789,1.); +#245789 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#245790 = ORIENTED_EDGE('',*,*,#245791,.T.); +#245791 = EDGE_CURVE('',#245784,#245792,#245794,.T.); +#245792 = VERTEX_POINT('',#245793); +#245793 = CARTESIAN_POINT('',(180.124732,-49.173763,1.585)); +#245794 = LINE('',#245795,#245796); +#245795 = CARTESIAN_POINT('',(180.066671,-49.053316,1.585)); +#245796 = VECTOR('',#245797,1.); +#245797 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#245798 = ORIENTED_EDGE('',*,*,#245799,.T.); +#245799 = EDGE_CURVE('',#245792,#245800,#245802,.T.); +#245800 = VERTEX_POINT('',#245801); +#245801 = CARTESIAN_POINT('',(180.123973,-49.300095,1.585)); +#245802 = LINE('',#245803,#245804); +#245803 = CARTESIAN_POINT('',(180.124732,-49.173763,1.585)); +#245804 = VECTOR('',#245805,1.); +#245805 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#245806 = ORIENTED_EDGE('',*,*,#245807,.T.); +#245807 = EDGE_CURVE('',#245800,#245808,#245810,.T.); +#245808 = VERTEX_POINT('',#245809); +#245809 = CARTESIAN_POINT('',(180.065915,-49.468158,1.585)); +#245810 = LINE('',#245811,#245812); +#245811 = CARTESIAN_POINT('',(180.123973,-49.300095,1.585)); +#245812 = VECTOR('',#245813,1.); +#245813 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#245814 = ORIENTED_EDGE('',*,*,#245815,.T.); +#245815 = EDGE_CURVE('',#245808,#245816,#245818,.T.); +#245816 = VERTEX_POINT('',#245817); +#245817 = CARTESIAN_POINT('',(179.744351,-49.791169,1.585)); +#245818 = LINE('',#245819,#245820); +#245819 = CARTESIAN_POINT('',(180.065915,-49.468158,1.585)); +#245820 = VECTOR('',#245821,1.); +#245821 = DIRECTION('',(-0.705517626477,-0.708692372423,0.)); +#245822 = ORIENTED_EDGE('',*,*,#245823,.T.); +#245823 = EDGE_CURVE('',#245816,#245824,#245826,.T.); +#245824 = VERTEX_POINT('',#245825); +#245825 = CARTESIAN_POINT('',(179.72807,-49.751864,1.585)); +#245826 = LINE('',#245827,#245828); +#245827 = CARTESIAN_POINT('',(179.744351,-49.791169,1.585)); +#245828 = VECTOR('',#245829,1.); +#245829 = DIRECTION('',(-0.382690172153,0.923876740771,0.)); +#245830 = ORIENTED_EDGE('',*,*,#245831,.T.); +#245831 = EDGE_CURVE('',#245824,#245832,#245834,.T.); +#245832 = VERTEX_POINT('',#245833); +#245833 = CARTESIAN_POINT('',(179.686686,-49.71048,1.585)); +#245834 = LINE('',#245835,#245836); +#245835 = CARTESIAN_POINT('',(179.72807,-49.751864,1.585)); +#245836 = VECTOR('',#245837,1.); +#245837 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#245838 = ORIENTED_EDGE('',*,*,#245839,.T.); +#245839 = EDGE_CURVE('',#245832,#245840,#245842,.T.); +#245840 = VERTEX_POINT('',#245841); +#245841 = CARTESIAN_POINT('',(179.634934,-49.689043,1.585)); +#245842 = LINE('',#245843,#245844); +#245843 = CARTESIAN_POINT('',(179.686686,-49.71048,1.585)); +#245844 = VECTOR('',#245845,1.); +#245845 = DIRECTION('',(-0.923875621021,0.382692875402,0.)); +#245846 = ORIENTED_EDGE('',*,*,#245847,.T.); +#245847 = EDGE_CURVE('',#245840,#245848,#245850,.T.); +#245848 = VERTEX_POINT('',#245849); +#245849 = CARTESIAN_POINT('',(179.938001,-49.385976,1.585)); +#245850 = LINE('',#245851,#245852); +#245851 = CARTESIAN_POINT('',(179.634934,-49.689043,1.585)); +#245852 = VECTOR('',#245853,1.); +#245853 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#245854 = ORIENTED_EDGE('',*,*,#245855,.T.); +#245855 = EDGE_CURVE('',#245848,#245856,#245858,.T.); +#245856 = VERTEX_POINT('',#245857); +#245857 = CARTESIAN_POINT('',(179.976173,-49.271463,1.585)); +#245858 = LINE('',#245859,#245860); +#245859 = CARTESIAN_POINT('',(179.938001,-49.385976,1.585)); +#245860 = VECTOR('',#245861,1.); +#245861 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#245862 = ORIENTED_EDGE('',*,*,#245863,.T.); +#245863 = EDGE_CURVE('',#245856,#245864,#245866,.T.); +#245864 = VERTEX_POINT('',#245865); +#245865 = CARTESIAN_POINT('',(179.976173,-49.2061,1.585)); +#245866 = LINE('',#245867,#245868); +#245867 = CARTESIAN_POINT('',(179.976173,-49.271463,1.585)); +#245868 = VECTOR('',#245869,1.); +#245869 = DIRECTION('',(0.,1.,0.)); +#245870 = ORIENTED_EDGE('',*,*,#245871,.T.); +#245871 = EDGE_CURVE('',#245864,#245872,#245874,.T.); +#245872 = VERTEX_POINT('',#245873); +#245873 = CARTESIAN_POINT('',(179.842992,-49.072919,1.585)); +#245874 = CIRCLE('',#245875,0.18686440374); +#245875 = AXIS2_PLACEMENT_3D('',#245876,#245877,#245878); +#245876 = CARTESIAN_POINT('',(179.795456,-49.253636,1.585)); +#245877 = DIRECTION('',(0.,0.,1.)); +#245878 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#245879 = ORIENTED_EDGE('',*,*,#245880,.T.); +#245880 = EDGE_CURVE('',#245872,#245881,#245883,.T.); +#245881 = VERTEX_POINT('',#245882); +#245882 = CARTESIAN_POINT('',(179.640307,-49.072919,1.585)); +#245883 = LINE('',#245884,#245885); +#245884 = CARTESIAN_POINT('',(179.842992,-49.072919,1.585)); +#245885 = VECTOR('',#245886,1.); +#245886 = DIRECTION('',(-1.,0.,0.)); +#245887 = ORIENTED_EDGE('',*,*,#245888,.T.); +#245888 = EDGE_CURVE('',#245881,#245889,#245891,.T.); +#245889 = VERTEX_POINT('',#245890); +#245890 = CARTESIAN_POINT('',(179.571791,-49.107177,1.585)); +#245891 = LINE('',#245892,#245893); +#245892 = CARTESIAN_POINT('',(179.640307,-49.072919,1.585)); +#245893 = VECTOR('',#245894,1.); +#245894 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#245895 = ORIENTED_EDGE('',*,*,#245896,.T.); +#245896 = EDGE_CURVE('',#245889,#245897,#245899,.T.); +#245897 = VERTEX_POINT('',#245898); +#245898 = CARTESIAN_POINT('',(179.521413,-49.155517,1.585)); +#245899 = LINE('',#245900,#245901); +#245900 = CARTESIAN_POINT('',(179.571791,-49.107177,1.585)); +#245901 = VECTOR('',#245902,1.); +#245902 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#245903 = ORIENTED_EDGE('',*,*,#245904,.T.); +#245904 = EDGE_CURVE('',#245897,#245905,#245907,.T.); +#245905 = VERTEX_POINT('',#245906); +#245906 = CARTESIAN_POINT('',(179.426712,-49.040124,1.585)); +#245907 = CIRCLE('',#245908,7.499996838526E-02); +#245908 = AXIS2_PLACEMENT_3D('',#245909,#245910,#245911); +#245909 = CARTESIAN_POINT('',(179.479745,-49.09315697246,1.585)); +#245910 = DIRECTION('',(0.,0.,-1.)); +#245911 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#245912 = ORIENTED_EDGE('',*,*,#245913,.T.); +#245913 = EDGE_CURVE('',#245905,#245773,#245914,.T.); +#245914 = LINE('',#245915,#245916); +#245915 = CARTESIAN_POINT('',(179.426712,-49.040124,1.585)); +#245916 = VECTOR('',#245917,1.); +#245917 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#245918 = PLANE('',#245919); +#245919 = AXIS2_PLACEMENT_3D('',#245920,#245921,#245922); +#245920 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245921 = DIRECTION('',(0.,0.,1.)); +#245922 = DIRECTION('',(1.,0.,-0.)); +#245923 = SHELL_BASED_SURFACE_MODEL('',(#245924)); +#245924 = OPEN_SHELL('',(#245925)); +#245925 = ADVANCED_FACE('',(#245926,#246003),#246080,.T.); +#245926 = FACE_BOUND('',#245927,.F.); +#245927 = EDGE_LOOP('',(#245928,#245939,#245947,#245956,#245964,#245972, + #245981,#245989,#245997)); +#245928 = ORIENTED_EDGE('',*,*,#245929,.T.); +#245929 = EDGE_CURVE('',#245930,#245932,#245934,.T.); +#245930 = VERTEX_POINT('',#245931); +#245931 = CARTESIAN_POINT('',(177.115199,-48.536172,1.585)); +#245932 = VERTEX_POINT('',#245933); +#245933 = CARTESIAN_POINT('',(177.678513,-48.541538,1.585)); +#245934 = CIRCLE('',#245935,0.504047013411); +#245935 = AXIS2_PLACEMENT_3D('',#245936,#245937,#245938); +#245936 = CARTESIAN_POINT('',(177.39287439108,-48.95683786374,1.585)); +#245937 = DIRECTION('',(0.,0.,-1.)); +#245938 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#245939 = ORIENTED_EDGE('',*,*,#245940,.T.); +#245940 = EDGE_CURVE('',#245932,#245941,#245943,.T.); +#245941 = VERTEX_POINT('',#245942); +#245942 = CARTESIAN_POINT('',(177.741967,-48.607068,1.585)); +#245943 = LINE('',#245944,#245945); +#245944 = CARTESIAN_POINT('',(177.678513,-48.541538,1.585)); +#245945 = VECTOR('',#245946,1.); +#245946 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#245947 = ORIENTED_EDGE('',*,*,#245948,.T.); +#245948 = EDGE_CURVE('',#245941,#245949,#245951,.T.); +#245949 = VERTEX_POINT('',#245950); +#245950 = CARTESIAN_POINT('',(177.671067,-49.090979,1.585)); +#245951 = CIRCLE('',#245952,0.3442476568); +#245952 = AXIS2_PLACEMENT_3D('',#245953,#245954,#245955); +#245953 = CARTESIAN_POINT('',(177.46678063106,-48.81389863497,1.585)); +#245954 = DIRECTION('',(0.,0.,-1.)); +#245955 = DIRECTION('',(0.799384871611,0.600819296494,0.)); +#245956 = ORIENTED_EDGE('',*,*,#245957,.T.); +#245957 = EDGE_CURVE('',#245949,#245958,#245960,.T.); +#245958 = VERTEX_POINT('',#245959); +#245959 = CARTESIAN_POINT('',(177.550624,-49.149039,1.585)); +#245960 = LINE('',#245961,#245962); +#245961 = CARTESIAN_POINT('',(177.671067,-49.090979,1.585)); +#245962 = VECTOR('',#245963,1.); +#245963 = DIRECTION('',(-0.900800079444,-0.434234057708,0.)); +#245964 = ORIENTED_EDGE('',*,*,#245965,.T.); +#245965 = EDGE_CURVE('',#245958,#245966,#245968,.T.); +#245966 = VERTEX_POINT('',#245967); +#245967 = CARTESIAN_POINT('',(177.230468,-49.147817,1.585)); +#245968 = LINE('',#245969,#245970); +#245969 = CARTESIAN_POINT('',(177.550624,-49.149039,1.585)); +#245970 = VECTOR('',#245971,1.); +#245971 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#245972 = ORIENTED_EDGE('',*,*,#245973,.T.); +#245973 = EDGE_CURVE('',#245966,#245974,#245976,.T.); +#245974 = VERTEX_POINT('',#245975); +#245975 = CARTESIAN_POINT('',(176.986243,-48.899636,1.585)); +#245976 = CIRCLE('',#245977,0.348628078749); +#245977 = AXIS2_PLACEMENT_3D('',#245978,#245979,#245980); +#245978 = CARTESIAN_POINT('',(177.3236430302,-48.81187064857,1.585)); +#245979 = DIRECTION('',(0.,0.,-1.)); +#245980 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#245981 = ORIENTED_EDGE('',*,*,#245982,.T.); +#245982 = EDGE_CURVE('',#245974,#245983,#245985,.T.); +#245983 = VERTEX_POINT('',#245984); +#245984 = CARTESIAN_POINT('',(176.987465,-48.722338,1.585)); +#245985 = LINE('',#245986,#245987); +#245986 = CARTESIAN_POINT('',(176.986243,-48.899636,1.585)); +#245987 = VECTOR('',#245988,1.); +#245988 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#245989 = ORIENTED_EDGE('',*,*,#245990,.T.); +#245990 = EDGE_CURVE('',#245983,#245991,#245993,.T.); +#245991 = VERTEX_POINT('',#245992); +#245992 = CARTESIAN_POINT('',(177.049669,-48.599625,1.585)); +#245993 = LINE('',#245994,#245995); +#245994 = CARTESIAN_POINT('',(176.987465,-48.722338,1.585)); +#245995 = VECTOR('',#245996,1.); +#245996 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#245997 = ORIENTED_EDGE('',*,*,#245998,.T.); +#245998 = EDGE_CURVE('',#245991,#245930,#245999,.T.); +#245999 = LINE('',#246000,#246001); +#246000 = CARTESIAN_POINT('',(177.049669,-48.599625,1.585)); +#246001 = VECTOR('',#246002,1.); +#246002 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#246003 = FACE_BOUND('',#246004,.F.); +#246004 = EDGE_LOOP('',(#246005,#246016,#246024,#246033,#246041,#246049, + #246058,#246066,#246074)); +#246005 = ORIENTED_EDGE('',*,*,#246006,.T.); +#246006 = EDGE_CURVE('',#246007,#246009,#246011,.T.); +#246007 = VERTEX_POINT('',#246008); +#246008 = CARTESIAN_POINT('',(177.586803,-48.660929,1.585)); +#246009 = VERTEX_POINT('',#246010); +#246010 = CARTESIAN_POINT('',(177.199467,-48.660929,1.585)); +#246011 = CIRCLE('',#246012,0.358503491901); +#246012 = AXIS2_PLACEMENT_3D('',#246013,#246014,#246015); +#246013 = CARTESIAN_POINT('',(177.393135,-48.96262,1.585)); +#246014 = DIRECTION('',(0.,0.,1.)); +#246015 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#246016 = ORIENTED_EDGE('',*,*,#246017,.T.); +#246017 = EDGE_CURVE('',#246009,#246018,#246020,.T.); +#246018 = VERTEX_POINT('',#246019); +#246019 = CARTESIAN_POINT('',(177.16906,-48.691336,1.585)); +#246020 = LINE('',#246021,#246022); +#246021 = CARTESIAN_POINT('',(177.199467,-48.660929,1.585)); +#246022 = VECTOR('',#246023,1.); +#246023 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#246024 = ORIENTED_EDGE('',*,*,#246025,.T.); +#246025 = EDGE_CURVE('',#246018,#246026,#246028,.T.); +#246026 = VERTEX_POINT('',#246027); +#246027 = CARTESIAN_POINT('',(177.199467,-48.966222,1.585)); +#246028 = CIRCLE('',#246029,0.198386215365); +#246029 = AXIS2_PLACEMENT_3D('',#246030,#246031,#246032); +#246030 = CARTESIAN_POINT('',(177.3256521753,-48.81313904216,1.585)); +#246031 = DIRECTION('',(0.,0.,1.)); +#246032 = DIRECTION('',(-0.789329919001,0.61396928178,0.)); +#246033 = ORIENTED_EDGE('',*,*,#246034,.T.); +#246034 = EDGE_CURVE('',#246026,#246035,#246037,.T.); +#246035 = VERTEX_POINT('',#246036); +#246036 = CARTESIAN_POINT('',(177.267983,-49.00048,1.585)); +#246037 = LINE('',#246038,#246039); +#246038 = CARTESIAN_POINT('',(177.199467,-48.966222,1.585)); +#246039 = VECTOR('',#246040,1.); +#246040 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#246041 = ORIENTED_EDGE('',*,*,#246042,.T.); +#246042 = EDGE_CURVE('',#246035,#246043,#246045,.T.); +#246043 = VERTEX_POINT('',#246044); +#246044 = CARTESIAN_POINT('',(177.518287,-49.00048,1.585)); +#246045 = LINE('',#246046,#246047); +#246046 = CARTESIAN_POINT('',(177.267983,-49.00048,1.585)); +#246047 = VECTOR('',#246048,1.); +#246048 = DIRECTION('',(1.,0.,0.)); +#246049 = ORIENTED_EDGE('',*,*,#246050,.T.); +#246050 = EDGE_CURVE('',#246043,#246051,#246053,.T.); +#246051 = VERTEX_POINT('',#246052); +#246052 = CARTESIAN_POINT('',(177.651469,-48.867299,1.585)); +#246053 = CIRCLE('',#246054,0.186872595955); +#246054 = AXIS2_PLACEMENT_3D('',#246055,#246056,#246057); +#246055 = CARTESIAN_POINT('',(177.47074536766,-48.81975601068,1.585)); +#246056 = DIRECTION('',(0.,0.,1.)); +#246057 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#246058 = ORIENTED_EDGE('',*,*,#246059,.T.); +#246059 = EDGE_CURVE('',#246051,#246060,#246062,.T.); +#246060 = VERTEX_POINT('',#246061); +#246061 = CARTESIAN_POINT('',(177.651469,-48.759852,1.585)); +#246062 = LINE('',#246063,#246064); +#246063 = CARTESIAN_POINT('',(177.651469,-48.867299,1.585)); +#246064 = VECTOR('',#246065,1.); +#246065 = DIRECTION('',(0.,1.,0.)); +#246066 = ORIENTED_EDGE('',*,*,#246067,.T.); +#246067 = EDGE_CURVE('',#246060,#246068,#246070,.T.); +#246068 = VERTEX_POINT('',#246069); +#246069 = CARTESIAN_POINT('',(177.617211,-48.691336,1.585)); +#246070 = LINE('',#246071,#246072); +#246071 = CARTESIAN_POINT('',(177.651469,-48.759852,1.585)); +#246072 = VECTOR('',#246073,1.); +#246073 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#246074 = ORIENTED_EDGE('',*,*,#246075,.T.); +#246075 = EDGE_CURVE('',#246068,#246007,#246076,.T.); +#246076 = LINE('',#246077,#246078); +#246077 = CARTESIAN_POINT('',(177.617211,-48.691336,1.585)); +#246078 = VECTOR('',#246079,1.); +#246079 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#246080 = PLANE('',#246081); +#246081 = AXIS2_PLACEMENT_3D('',#246082,#246083,#246084); +#246082 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246083 = DIRECTION('',(0.,0.,1.)); +#246084 = DIRECTION('',(1.,0.,-0.)); +#246085 = SHELL_BASED_SURFACE_MODEL('',(#246086)); +#246086 = OPEN_SHELL('',(#246087)); +#246087 = ADVANCED_FACE('',(#246088),#246132,.T.); +#246088 = FACE_BOUND('',#246089,.F.); +#246089 = EDGE_LOOP('',(#246090,#246101,#246109,#246118,#246126)); +#246090 = ORIENTED_EDGE('',*,*,#246091,.T.); +#246091 = EDGE_CURVE('',#246092,#246094,#246096,.T.); +#246092 = VERTEX_POINT('',#246093); +#246093 = CARTESIAN_POINT('',(175.263717,-48.362881,1.585)); +#246094 = VERTEX_POINT('',#246095); +#246095 = CARTESIAN_POINT('',(175.37915,-48.385842,1.585)); +#246096 = CIRCLE('',#246097,6.000007318648E-02); +#246097 = AXIS2_PLACEMENT_3D('',#246098,#246099,#246100); +#246098 = CARTESIAN_POINT('',(175.31914992681,-48.38584182331,1.585)); +#246099 = DIRECTION('',(0.,0.,-1.)); +#246100 = DIRECTION('',(-0.923880986636,0.382679921778,0.)); +#246101 = ORIENTED_EDGE('',*,*,#246102,.T.); +#246102 = EDGE_CURVE('',#246094,#246103,#246105,.T.); +#246103 = VERTEX_POINT('',#246104); +#246104 = CARTESIAN_POINT('',(175.37915,-48.860358,1.585)); +#246105 = LINE('',#246106,#246107); +#246106 = CARTESIAN_POINT('',(175.37915,-48.385842,1.585)); +#246107 = VECTOR('',#246108,1.); +#246108 = DIRECTION('',(0.,-1.,0.)); +#246109 = ORIENTED_EDGE('',*,*,#246110,.T.); +#246110 = EDGE_CURVE('',#246103,#246111,#246113,.T.); +#246111 = VERTEX_POINT('',#246112); +#246112 = CARTESIAN_POINT('',(175.25915,-48.860358,1.585)); +#246113 = CIRCLE('',#246114,6.000000000042E-02); +#246114 = AXIS2_PLACEMENT_3D('',#246115,#246116,#246117); +#246115 = CARTESIAN_POINT('',(175.31915,-48.86035822558,1.585)); +#246116 = DIRECTION('',(0.,0.,-1.)); +#246117 = DIRECTION('',(0.999999999993,3.759794016838E-06,0.)); +#246118 = ORIENTED_EDGE('',*,*,#246119,.T.); +#246119 = EDGE_CURVE('',#246111,#246120,#246122,.T.); +#246120 = VERTEX_POINT('',#246121); +#246121 = CARTESIAN_POINT('',(175.25915,-48.385842,1.585)); +#246122 = LINE('',#246123,#246124); +#246123 = CARTESIAN_POINT('',(175.25915,-48.860358,1.585)); +#246124 = VECTOR('',#246125,1.); +#246125 = DIRECTION('',(0.,1.,0.)); +#246126 = ORIENTED_EDGE('',*,*,#246127,.T.); +#246127 = EDGE_CURVE('',#246120,#246092,#246128,.T.); +#246128 = LINE('',#246129,#246130); +#246129 = CARTESIAN_POINT('',(175.25915,-48.385842,1.585)); +#246130 = VECTOR('',#246131,1.); +#246131 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#246132 = PLANE('',#246133); +#246133 = AXIS2_PLACEMENT_3D('',#246134,#246135,#246136); +#246134 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246135 = DIRECTION('',(0.,0.,1.)); +#246136 = DIRECTION('',(1.,0.,-0.)); +#246137 = SHELL_BASED_SURFACE_MODEL('',(#246138)); +#246138 = OPEN_SHELL('',(#246139)); +#246139 = ADVANCED_FACE('',(#246140),#246184,.T.); +#246140 = FACE_BOUND('',#246141,.F.); +#246141 = EDGE_LOOP('',(#246142,#246153,#246161,#246170,#246178)); +#246142 = ORIENTED_EDGE('',*,*,#246143,.T.); +#246143 = EDGE_CURVE('',#246144,#246146,#246148,.T.); +#246144 = VERTEX_POINT('',#246145); +#246145 = CARTESIAN_POINT('',(176.308717,-48.362881,1.585)); +#246146 = VERTEX_POINT('',#246147); +#246147 = CARTESIAN_POINT('',(176.42415,-48.385842,1.585)); +#246148 = CIRCLE('',#246149,6.000007318647E-02); +#246149 = AXIS2_PLACEMENT_3D('',#246150,#246151,#246152); +#246150 = CARTESIAN_POINT('',(176.36414992681,-48.38584182331,1.585)); +#246151 = DIRECTION('',(0.,0.,-1.)); +#246152 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#246153 = ORIENTED_EDGE('',*,*,#246154,.T.); +#246154 = EDGE_CURVE('',#246146,#246155,#246157,.T.); +#246155 = VERTEX_POINT('',#246156); +#246156 = CARTESIAN_POINT('',(176.42415,-48.860358,1.585)); +#246157 = LINE('',#246158,#246159); +#246158 = CARTESIAN_POINT('',(176.42415,-48.385842,1.585)); +#246159 = VECTOR('',#246160,1.); +#246160 = DIRECTION('',(0.,-1.,0.)); +#246161 = ORIENTED_EDGE('',*,*,#246162,.T.); +#246162 = EDGE_CURVE('',#246155,#246163,#246165,.T.); +#246163 = VERTEX_POINT('',#246164); +#246164 = CARTESIAN_POINT('',(176.30415,-48.860358,1.585)); +#246165 = CIRCLE('',#246166,6.000000000042E-02); +#246166 = AXIS2_PLACEMENT_3D('',#246167,#246168,#246169); +#246167 = CARTESIAN_POINT('',(176.36415,-48.86035822558,1.585)); +#246168 = DIRECTION('',(0.,0.,-1.)); +#246169 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#246170 = ORIENTED_EDGE('',*,*,#246171,.T.); +#246171 = EDGE_CURVE('',#246163,#246172,#246174,.T.); +#246172 = VERTEX_POINT('',#246173); +#246173 = CARTESIAN_POINT('',(176.30415,-48.385842,1.585)); +#246174 = LINE('',#246175,#246176); +#246175 = CARTESIAN_POINT('',(176.30415,-48.860358,1.585)); +#246176 = VECTOR('',#246177,1.); +#246177 = DIRECTION('',(0.,1.,0.)); +#246178 = ORIENTED_EDGE('',*,*,#246179,.T.); +#246179 = EDGE_CURVE('',#246172,#246144,#246180,.T.); +#246180 = LINE('',#246181,#246182); +#246181 = CARTESIAN_POINT('',(176.30415,-48.385842,1.585)); +#246182 = VECTOR('',#246183,1.); +#246183 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#246184 = PLANE('',#246185); +#246185 = AXIS2_PLACEMENT_3D('',#246186,#246187,#246188); +#246186 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246187 = DIRECTION('',(0.,0.,1.)); +#246188 = DIRECTION('',(1.,0.,-0.)); +#246189 = SHELL_BASED_SURFACE_MODEL('',(#246190)); +#246190 = OPEN_SHELL('',(#246191)); +#246191 = ADVANCED_FACE('',(#246192),#246228,.T.); +#246192 = FACE_BOUND('',#246193,.F.); +#246193 = EDGE_LOOP('',(#246194,#246205,#246213,#246222)); +#246194 = ORIENTED_EDGE('',*,*,#246195,.T.); +#246195 = EDGE_CURVE('',#246196,#246198,#246200,.T.); +#246196 = VERTEX_POINT('',#246197); +#246197 = CARTESIAN_POINT('',(194.016892,-48.9056,1.585)); +#246198 = VERTEX_POINT('',#246199); +#246199 = CARTESIAN_POINT('',(194.016892,-48.7856,1.585)); +#246200 = CIRCLE('',#246201,6.000000000042E-02); +#246201 = AXIS2_PLACEMENT_3D('',#246202,#246203,#246204); +#246202 = CARTESIAN_POINT('',(194.01689177441,-48.8456,1.585)); +#246203 = DIRECTION('',(0.,0.,-1.)); +#246204 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246205 = ORIENTED_EDGE('',*,*,#246206,.T.); +#246206 = EDGE_CURVE('',#246198,#246207,#246209,.T.); +#246207 = VERTEX_POINT('',#246208); +#246208 = CARTESIAN_POINT('',(194.491408,-48.7856,1.585)); +#246209 = LINE('',#246210,#246211); +#246210 = CARTESIAN_POINT('',(194.016892,-48.7856,1.585)); +#246211 = VECTOR('',#246212,1.); +#246212 = DIRECTION('',(1.,0.,0.)); +#246213 = ORIENTED_EDGE('',*,*,#246214,.T.); +#246214 = EDGE_CURVE('',#246207,#246215,#246217,.T.); +#246215 = VERTEX_POINT('',#246216); +#246216 = CARTESIAN_POINT('',(194.491408,-48.9056,1.585)); +#246217 = CIRCLE('',#246218,6.000000000043E-02); +#246218 = AXIS2_PLACEMENT_3D('',#246219,#246220,#246221); +#246219 = CARTESIAN_POINT('',(194.49140822558,-48.8456,1.585)); +#246220 = DIRECTION('',(0.,0.,-1.)); +#246221 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246222 = ORIENTED_EDGE('',*,*,#246223,.T.); +#246223 = EDGE_CURVE('',#246215,#246196,#246224,.T.); +#246224 = LINE('',#246225,#246226); +#246225 = CARTESIAN_POINT('',(194.491408,-48.9056,1.585)); +#246226 = VECTOR('',#246227,1.); +#246227 = DIRECTION('',(-1.,0.,0.)); +#246228 = PLANE('',#246229); +#246229 = AXIS2_PLACEMENT_3D('',#246230,#246231,#246232); +#246230 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246231 = DIRECTION('',(0.,0.,1.)); +#246232 = DIRECTION('',(1.,0.,-0.)); +#246233 = SHELL_BASED_SURFACE_MODEL('',(#246234)); +#246234 = OPEN_SHELL('',(#246235)); +#246235 = ADVANCED_FACE('',(#246236),#246272,.T.); +#246236 = FACE_BOUND('',#246237,.F.); +#246237 = EDGE_LOOP('',(#246238,#246249,#246257,#246266)); +#246238 = ORIENTED_EDGE('',*,*,#246239,.T.); +#246239 = EDGE_CURVE('',#246240,#246242,#246244,.T.); +#246240 = VERTEX_POINT('',#246241); +#246241 = CARTESIAN_POINT('',(198.016892,-48.9056,1.585)); +#246242 = VERTEX_POINT('',#246243); +#246243 = CARTESIAN_POINT('',(198.016892,-48.7856,1.585)); +#246244 = CIRCLE('',#246245,6.000000000042E-02); +#246245 = AXIS2_PLACEMENT_3D('',#246246,#246247,#246248); +#246246 = CARTESIAN_POINT('',(198.01689177441,-48.8456,1.585)); +#246247 = DIRECTION('',(0.,0.,-1.)); +#246248 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246249 = ORIENTED_EDGE('',*,*,#246250,.T.); +#246250 = EDGE_CURVE('',#246242,#246251,#246253,.T.); +#246251 = VERTEX_POINT('',#246252); +#246252 = CARTESIAN_POINT('',(198.491408,-48.7856,1.585)); +#246253 = LINE('',#246254,#246255); +#246254 = CARTESIAN_POINT('',(198.016892,-48.7856,1.585)); +#246255 = VECTOR('',#246256,1.); +#246256 = DIRECTION('',(1.,0.,0.)); +#246257 = ORIENTED_EDGE('',*,*,#246258,.T.); +#246258 = EDGE_CURVE('',#246251,#246259,#246261,.T.); +#246259 = VERTEX_POINT('',#246260); +#246260 = CARTESIAN_POINT('',(198.491408,-48.9056,1.585)); +#246261 = CIRCLE('',#246262,6.000000000043E-02); +#246262 = AXIS2_PLACEMENT_3D('',#246263,#246264,#246265); +#246263 = CARTESIAN_POINT('',(198.49140822558,-48.8456,1.585)); +#246264 = DIRECTION('',(0.,0.,-1.)); +#246265 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246266 = ORIENTED_EDGE('',*,*,#246267,.T.); +#246267 = EDGE_CURVE('',#246259,#246240,#246268,.T.); +#246268 = LINE('',#246269,#246270); +#246269 = CARTESIAN_POINT('',(198.491408,-48.9056,1.585)); +#246270 = VECTOR('',#246271,1.); +#246271 = DIRECTION('',(-1.,0.,0.)); +#246272 = PLANE('',#246273); +#246273 = AXIS2_PLACEMENT_3D('',#246274,#246275,#246276); +#246274 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246275 = DIRECTION('',(0.,0.,1.)); +#246276 = DIRECTION('',(1.,0.,-0.)); +#246277 = SHELL_BASED_SURFACE_MODEL('',(#246278)); +#246278 = OPEN_SHELL('',(#246279)); +#246279 = ADVANCED_FACE('',(#246280),#246316,.T.); +#246280 = FACE_BOUND('',#246281,.F.); +#246281 = EDGE_LOOP('',(#246282,#246293,#246301,#246310)); +#246282 = ORIENTED_EDGE('',*,*,#246283,.T.); +#246283 = EDGE_CURVE('',#246284,#246286,#246288,.T.); +#246284 = VERTEX_POINT('',#246285); +#246285 = CARTESIAN_POINT('',(202.016892,-48.9056,1.585)); +#246286 = VERTEX_POINT('',#246287); +#246287 = CARTESIAN_POINT('',(202.016892,-48.7856,1.585)); +#246288 = CIRCLE('',#246289,6.000000000042E-02); +#246289 = AXIS2_PLACEMENT_3D('',#246290,#246291,#246292); +#246290 = CARTESIAN_POINT('',(202.01689177441,-48.8456,1.585)); +#246291 = DIRECTION('',(0.,0.,-1.)); +#246292 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246293 = ORIENTED_EDGE('',*,*,#246294,.T.); +#246294 = EDGE_CURVE('',#246286,#246295,#246297,.T.); +#246295 = VERTEX_POINT('',#246296); +#246296 = CARTESIAN_POINT('',(202.491408,-48.7856,1.585)); +#246297 = LINE('',#246298,#246299); +#246298 = CARTESIAN_POINT('',(202.016892,-48.7856,1.585)); +#246299 = VECTOR('',#246300,1.); +#246300 = DIRECTION('',(1.,0.,0.)); +#246301 = ORIENTED_EDGE('',*,*,#246302,.T.); +#246302 = EDGE_CURVE('',#246295,#246303,#246305,.T.); +#246303 = VERTEX_POINT('',#246304); +#246304 = CARTESIAN_POINT('',(202.491408,-48.9056,1.585)); +#246305 = CIRCLE('',#246306,6.000000000043E-02); +#246306 = AXIS2_PLACEMENT_3D('',#246307,#246308,#246309); +#246307 = CARTESIAN_POINT('',(202.49140822558,-48.8456,1.585)); +#246308 = DIRECTION('',(0.,0.,-1.)); +#246309 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246310 = ORIENTED_EDGE('',*,*,#246311,.T.); +#246311 = EDGE_CURVE('',#246303,#246284,#246312,.T.); +#246312 = LINE('',#246313,#246314); +#246313 = CARTESIAN_POINT('',(202.491408,-48.9056,1.585)); +#246314 = VECTOR('',#246315,1.); +#246315 = DIRECTION('',(-1.,0.,0.)); +#246316 = PLANE('',#246317); +#246317 = AXIS2_PLACEMENT_3D('',#246318,#246319,#246320); +#246318 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246319 = DIRECTION('',(0.,0.,1.)); +#246320 = DIRECTION('',(1.,0.,-0.)); +#246321 = SHELL_BASED_SURFACE_MODEL('',(#246322)); +#246322 = OPEN_SHELL('',(#246323)); +#246323 = ADVANCED_FACE('',(#246324),#246360,.T.); +#246324 = FACE_BOUND('',#246325,.F.); +#246325 = EDGE_LOOP('',(#246326,#246337,#246345,#246354)); +#246326 = ORIENTED_EDGE('',*,*,#246327,.T.); +#246327 = EDGE_CURVE('',#246328,#246330,#246332,.T.); +#246328 = VERTEX_POINT('',#246329); +#246329 = CARTESIAN_POINT('',(206.016892,-48.9056,1.585)); +#246330 = VERTEX_POINT('',#246331); +#246331 = CARTESIAN_POINT('',(206.016892,-48.7856,1.585)); +#246332 = CIRCLE('',#246333,6.000000000042E-02); +#246333 = AXIS2_PLACEMENT_3D('',#246334,#246335,#246336); +#246334 = CARTESIAN_POINT('',(206.01689177441,-48.8456,1.585)); +#246335 = DIRECTION('',(0.,0.,-1.)); +#246336 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246337 = ORIENTED_EDGE('',*,*,#246338,.T.); +#246338 = EDGE_CURVE('',#246330,#246339,#246341,.T.); +#246339 = VERTEX_POINT('',#246340); +#246340 = CARTESIAN_POINT('',(206.491408,-48.7856,1.585)); +#246341 = LINE('',#246342,#246343); +#246342 = CARTESIAN_POINT('',(206.016892,-48.7856,1.585)); +#246343 = VECTOR('',#246344,1.); +#246344 = DIRECTION('',(1.,0.,0.)); +#246345 = ORIENTED_EDGE('',*,*,#246346,.T.); +#246346 = EDGE_CURVE('',#246339,#246347,#246349,.T.); +#246347 = VERTEX_POINT('',#246348); +#246348 = CARTESIAN_POINT('',(206.491408,-48.9056,1.585)); +#246349 = CIRCLE('',#246350,6.000000000043E-02); +#246350 = AXIS2_PLACEMENT_3D('',#246351,#246352,#246353); +#246351 = CARTESIAN_POINT('',(206.49140822558,-48.8456,1.585)); +#246352 = DIRECTION('',(0.,0.,-1.)); +#246353 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246354 = ORIENTED_EDGE('',*,*,#246355,.T.); +#246355 = EDGE_CURVE('',#246347,#246328,#246356,.T.); +#246356 = LINE('',#246357,#246358); +#246357 = CARTESIAN_POINT('',(206.491408,-48.9056,1.585)); +#246358 = VECTOR('',#246359,1.); +#246359 = DIRECTION('',(-1.,0.,0.)); +#246360 = PLANE('',#246361); +#246361 = AXIS2_PLACEMENT_3D('',#246362,#246363,#246364); +#246362 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246363 = DIRECTION('',(0.,0.,1.)); +#246364 = DIRECTION('',(1.,0.,-0.)); +#246365 = SHELL_BASED_SURFACE_MODEL('',(#246366)); +#246366 = OPEN_SHELL('',(#246367)); +#246367 = ADVANCED_FACE('',(#246368),#246569,.T.); +#246368 = FACE_BOUND('',#246369,.F.); +#246369 = EDGE_LOOP('',(#246370,#246381,#246389,#246398,#246406,#246414, + #246423,#246431,#246439,#246448,#246456,#246464,#246472,#246480, + #246488,#246496,#246504,#246513,#246521,#246530,#246538,#246546, + #246554,#246563)); +#246370 = ORIENTED_EDGE('',*,*,#246371,.T.); +#246371 = EDGE_CURVE('',#246372,#246374,#246376,.T.); +#246372 = VERTEX_POINT('',#246373); +#246373 = CARTESIAN_POINT('',(177.07388,-47.246493,1.585)); +#246374 = VERTEX_POINT('',#246375); +#246375 = CARTESIAN_POINT('',(177.768137,-47.203596,1.585)); +#246376 = CIRCLE('',#246377,0.762529751519); +#246377 = AXIS2_PLACEMENT_3D('',#246378,#246379,#246380); +#246378 = CARTESIAN_POINT('',(177.46285806099,-47.90234945534,1.585)); +#246379 = DIRECTION('',(0.,0.,-1.)); +#246380 = DIRECTION('',(-0.51011525809,0.860106053614,0.)); +#246381 = ORIENTED_EDGE('',*,*,#246382,.T.); +#246382 = EDGE_CURVE('',#246374,#246383,#246385,.T.); +#246383 = VERTEX_POINT('',#246384); +#246384 = CARTESIAN_POINT('',(177.788829,-47.224288,1.585)); +#246385 = LINE('',#246386,#246387); +#246386 = CARTESIAN_POINT('',(177.768137,-47.203596,1.585)); +#246387 = VECTOR('',#246388,1.); +#246388 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#246389 = ORIENTED_EDGE('',*,*,#246390,.T.); +#246390 = EDGE_CURVE('',#246383,#246391,#246393,.T.); +#246391 = VERTEX_POINT('',#246392); +#246392 = CARTESIAN_POINT('',(177.726469,-47.340956,1.585)); +#246393 = CIRCLE('',#246394,7.49997958033E-02); +#246394 = AXIS2_PLACEMENT_3D('',#246395,#246396,#246397); +#246395 = CARTESIAN_POINT('',(177.72646931647,-47.26595620419,1.585)); +#246396 = DIRECTION('',(0.,0.,-1.)); +#246397 = DIRECTION('',(0.831464710782,0.555577568593,0.)); +#246398 = ORIENTED_EDGE('',*,*,#246399,.T.); +#246399 = EDGE_CURVE('',#246391,#246400,#246402,.T.); +#246400 = VERTEX_POINT('',#246401); +#246401 = CARTESIAN_POINT('',(177.220364,-47.340956,1.585)); +#246402 = LINE('',#246403,#246404); +#246403 = CARTESIAN_POINT('',(177.726469,-47.340956,1.585)); +#246404 = VECTOR('',#246405,1.); +#246405 = DIRECTION('',(-1.,0.,0.)); +#246406 = ORIENTED_EDGE('',*,*,#246407,.T.); +#246407 = EDGE_CURVE('',#246400,#246408,#246410,.T.); +#246408 = VERTEX_POINT('',#246409); +#246409 = CARTESIAN_POINT('',(177.163322,-47.369476,1.585)); +#246410 = LINE('',#246411,#246412); +#246411 = CARTESIAN_POINT('',(177.220364,-47.340956,1.585)); +#246412 = VECTOR('',#246413,1.); +#246413 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#246414 = ORIENTED_EDGE('',*,*,#246415,.T.); +#246415 = EDGE_CURVE('',#246408,#246416,#246418,.T.); +#246416 = VERTEX_POINT('',#246417); +#246417 = CARTESIAN_POINT('',(177.163322,-47.591007,1.585)); +#246418 = CIRCLE('',#246419,0.186653372204); +#246419 = AXIS2_PLACEMENT_3D('',#246420,#246421,#246422); +#246420 = CARTESIAN_POINT('',(177.31355676749,-47.4802415,1.585)); +#246421 = DIRECTION('',(0.,0.,1.)); +#246422 = DIRECTION('',(-0.804886435872,0.593428871347,0.)); +#246423 = ORIENTED_EDGE('',*,*,#246424,.T.); +#246424 = EDGE_CURVE('',#246416,#246425,#246427,.T.); +#246425 = VERTEX_POINT('',#246426); +#246426 = CARTESIAN_POINT('',(177.220364,-47.619528,1.585)); +#246427 = LINE('',#246428,#246429); +#246428 = CARTESIAN_POINT('',(177.163322,-47.591007,1.585)); +#246429 = VECTOR('',#246430,1.); +#246430 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#246431 = ORIENTED_EDGE('',*,*,#246432,.T.); +#246432 = EDGE_CURVE('',#246425,#246433,#246435,.T.); +#246433 = VERTEX_POINT('',#246434); +#246434 = CARTESIAN_POINT('',(177.741101,-47.620969,1.585)); +#246435 = LINE('',#246436,#246437); +#246436 = CARTESIAN_POINT('',(177.220364,-47.619528,1.585)); +#246437 = VECTOR('',#246438,1.); +#246438 = DIRECTION('',(0.999996171236,-2.767221232121E-03,0.)); +#246439 = ORIENTED_EDGE('',*,*,#246440,.T.); +#246440 = EDGE_CURVE('',#246433,#246441,#246443,.T.); +#246441 = VERTEX_POINT('',#246442); +#246442 = CARTESIAN_POINT('',(177.726469,-47.769528,1.585)); +#246443 = CIRCLE('',#246444,7.500006711464E-02); +#246444 = AXIS2_PLACEMENT_3D('',#246445,#246446,#246447); +#246445 = CARTESIAN_POINT('',(177.72646906711,-47.69452793288,1.585)); +#246446 = DIRECTION('',(0.,0.,-1.)); +#246447 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#246448 = ORIENTED_EDGE('',*,*,#246449,.T.); +#246449 = EDGE_CURVE('',#246441,#246450,#246452,.T.); +#246450 = VERTEX_POINT('',#246451); +#246451 = CARTESIAN_POINT('',(177.220364,-47.769528,1.585)); +#246452 = LINE('',#246453,#246454); +#246453 = CARTESIAN_POINT('',(177.726469,-47.769528,1.585)); +#246454 = VECTOR('',#246455,1.); +#246455 = DIRECTION('',(-1.,0.,0.)); +#246456 = ORIENTED_EDGE('',*,*,#246457,.T.); +#246457 = EDGE_CURVE('',#246450,#246458,#246460,.T.); +#246458 = VERTEX_POINT('',#246459); +#246459 = CARTESIAN_POINT('',(177.163322,-47.798048,1.585)); +#246460 = LINE('',#246461,#246462); +#246461 = CARTESIAN_POINT('',(177.220364,-47.769528,1.585)); +#246462 = VECTOR('',#246463,1.); +#246463 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#246464 = ORIENTED_EDGE('',*,*,#246465,.T.); +#246465 = EDGE_CURVE('',#246458,#246466,#246468,.T.); +#246466 = VERTEX_POINT('',#246467); +#246467 = CARTESIAN_POINT('',(177.134802,-47.85509,1.585)); +#246468 = LINE('',#246469,#246470); +#246469 = CARTESIAN_POINT('',(177.163322,-47.798048,1.585)); +#246470 = VECTOR('',#246471,1.); +#246471 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#246472 = ORIENTED_EDGE('',*,*,#246473,.T.); +#246473 = EDGE_CURVE('',#246466,#246474,#246476,.T.); +#246474 = VERTEX_POINT('',#246475); +#246475 = CARTESIAN_POINT('',(177.134802,-47.962537,1.585)); +#246476 = LINE('',#246477,#246478); +#246477 = CARTESIAN_POINT('',(177.134802,-47.85509,1.585)); +#246478 = VECTOR('',#246479,1.); +#246479 = DIRECTION('',(0.,-1.,0.)); +#246480 = ORIENTED_EDGE('',*,*,#246481,.T.); +#246481 = EDGE_CURVE('',#246474,#246482,#246484,.T.); +#246482 = VERTEX_POINT('',#246483); +#246483 = CARTESIAN_POINT('',(177.16906,-48.031053,1.585)); +#246484 = LINE('',#246485,#246486); +#246485 = CARTESIAN_POINT('',(177.134802,-47.962537,1.585)); +#246486 = VECTOR('',#246487,1.); +#246487 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#246488 = ORIENTED_EDGE('',*,*,#246489,.T.); +#246489 = EDGE_CURVE('',#246482,#246490,#246492,.T.); +#246490 = VERTEX_POINT('',#246491); +#246491 = CARTESIAN_POINT('',(177.186106,-48.048099,1.585)); +#246492 = LINE('',#246493,#246494); +#246493 = CARTESIAN_POINT('',(177.16906,-48.031053,1.585)); +#246494 = VECTOR('',#246495,1.); +#246495 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#246496 = ORIENTED_EDGE('',*,*,#246497,.T.); +#246497 = EDGE_CURVE('',#246490,#246498,#246500,.T.); +#246498 = VERTEX_POINT('',#246499); +#246499 = CARTESIAN_POINT('',(177.741101,-48.04954,1.585)); +#246500 = LINE('',#246501,#246502); +#246501 = CARTESIAN_POINT('',(177.186106,-48.048099,1.585)); +#246502 = VECTOR('',#246503,1.); +#246503 = DIRECTION('',(0.999996629319,-2.596411035863E-03,0.)); +#246504 = ORIENTED_EDGE('',*,*,#246505,.T.); +#246505 = EDGE_CURVE('',#246498,#246506,#246508,.T.); +#246506 = VERTEX_POINT('',#246507); +#246507 = CARTESIAN_POINT('',(177.726469,-48.198099,1.585)); +#246508 = CIRCLE('',#246509,7.500006711464E-02); +#246509 = AXIS2_PLACEMENT_3D('',#246510,#246511,#246512); +#246510 = CARTESIAN_POINT('',(177.72646906711,-48.12309893288,1.585)); +#246511 = DIRECTION('',(0.,0.,-1.)); +#246512 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#246513 = ORIENTED_EDGE('',*,*,#246514,.T.); +#246514 = EDGE_CURVE('',#246506,#246515,#246517,.T.); +#246515 = VERTEX_POINT('',#246516); +#246516 = CARTESIAN_POINT('',(177.04517,-48.196658,1.585)); +#246517 = LINE('',#246518,#246519); +#246518 = CARTESIAN_POINT('',(177.726469,-48.198099,1.585)); +#246519 = VECTOR('',#246520,1.); +#246520 = DIRECTION('',(-0.999997763232,2.115072496535E-03,0.)); +#246521 = ORIENTED_EDGE('',*,*,#246522,.T.); +#246522 = EDGE_CURVE('',#246515,#246523,#246525,.T.); +#246523 = VERTEX_POINT('',#246524); +#246524 = CARTESIAN_POINT('',(177.016843,-48.062029,1.585)); +#246525 = CIRCLE('',#246526,7.472382541849E-02); +#246526 = AXIS2_PLACEMENT_3D('',#246527,#246528,#246529); +#246527 = CARTESIAN_POINT('',(177.05956681475,-48.12333418524,1.585)); +#246528 = DIRECTION('',(0.,0.,-1.)); +#246529 = DIRECTION('',(-0.192666993071,-0.981264199786,-0.)); +#246530 = ORIENTED_EDGE('',*,*,#246531,.T.); +#246531 = EDGE_CURVE('',#246523,#246532,#246534,.T.); +#246532 = VERTEX_POINT('',#246533); +#246533 = CARTESIAN_POINT('',(176.986243,-47.994874,1.585)); +#246534 = LINE('',#246535,#246536); +#246535 = CARTESIAN_POINT('',(177.016843,-48.062029,1.585)); +#246536 = VECTOR('',#246537,1.); +#246537 = DIRECTION('',(-0.414645032321,0.90998324005,0.)); +#246538 = ORIENTED_EDGE('',*,*,#246539,.T.); +#246539 = EDGE_CURVE('',#246532,#246540,#246542,.T.); +#246540 = VERTEX_POINT('',#246541); +#246541 = CARTESIAN_POINT('',(176.987465,-47.817576,1.585)); +#246542 = LINE('',#246543,#246544); +#246543 = CARTESIAN_POINT('',(176.986243,-47.994874,1.585)); +#246544 = VECTOR('',#246545,1.); +#246545 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#246546 = ORIENTED_EDGE('',*,*,#246547,.T.); +#246547 = EDGE_CURVE('',#246540,#246548,#246550,.T.); +#246548 = VERTEX_POINT('',#246549); +#246549 = CARTESIAN_POINT('',(177.048171,-47.692893,1.585)); +#246550 = LINE('',#246551,#246552); +#246551 = CARTESIAN_POINT('',(176.987465,-47.817576,1.585)); +#246552 = VECTOR('',#246553,1.); +#246553 = DIRECTION('',(0.437753780471,0.899094893592,0.)); +#246554 = ORIENTED_EDGE('',*,*,#246555,.T.); +#246555 = EDGE_CURVE('',#246548,#246556,#246558,.T.); +#246556 = VERTEX_POINT('',#246557); +#246557 = CARTESIAN_POINT('',(177.048171,-47.267592,1.585)); +#246558 = CIRCLE('',#246559,0.347106732746); +#246559 = AXIS2_PLACEMENT_3D('',#246560,#246561,#246562); +#246560 = CARTESIAN_POINT('',(177.32251175302,-47.4802425,1.585)); +#246561 = DIRECTION('',(0.,0.,-1.)); +#246562 = DIRECTION('',(-0.790364251506,-0.612637209073,-0.)); +#246563 = ORIENTED_EDGE('',*,*,#246564,.T.); +#246564 = EDGE_CURVE('',#246556,#246372,#246565,.T.); +#246565 = LINE('',#246566,#246567); +#246566 = CARTESIAN_POINT('',(177.048171,-47.267592,1.585)); +#246567 = VECTOR('',#246568,1.); +#246568 = DIRECTION('',(0.773007961956,0.634396319939,0.)); +#246569 = PLANE('',#246570); +#246570 = AXIS2_PLACEMENT_3D('',#246571,#246572,#246573); +#246571 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246572 = DIRECTION('',(0.,0.,1.)); +#246573 = DIRECTION('',(1.,0.,-0.)); +#246574 = SHELL_BASED_SURFACE_MODEL('',(#246575)); +#246575 = OPEN_SHELL('',(#246576)); +#246576 = ADVANCED_FACE('',(#246577),#246613,.T.); +#246577 = FACE_BOUND('',#246578,.F.); +#246578 = EDGE_LOOP('',(#246579,#246590,#246598,#246607)); +#246579 = ORIENTED_EDGE('',*,*,#246580,.T.); +#246580 = EDGE_CURVE('',#246581,#246583,#246585,.T.); +#246581 = VERTEX_POINT('',#246582); +#246582 = CARTESIAN_POINT('',(145.805398,-48.0931,1.585)); +#246583 = VERTEX_POINT('',#246584); +#246584 = CARTESIAN_POINT('',(145.805398,-47.9731,1.585)); +#246585 = CIRCLE('',#246586,6.000000000042E-02); +#246586 = AXIS2_PLACEMENT_3D('',#246587,#246588,#246589); +#246587 = CARTESIAN_POINT('',(145.80539777441,-48.0331,1.585)); +#246588 = DIRECTION('',(0.,0.,-1.)); +#246589 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#246590 = ORIENTED_EDGE('',*,*,#246591,.T.); +#246591 = EDGE_CURVE('',#246583,#246592,#246594,.T.); +#246592 = VERTEX_POINT('',#246593); +#246593 = CARTESIAN_POINT('',(148.577902,-47.9731,1.585)); +#246594 = LINE('',#246595,#246596); +#246595 = CARTESIAN_POINT('',(145.805398,-47.9731,1.585)); +#246596 = VECTOR('',#246597,1.); +#246597 = DIRECTION('',(1.,0.,0.)); +#246598 = ORIENTED_EDGE('',*,*,#246599,.T.); +#246599 = EDGE_CURVE('',#246592,#246600,#246602,.T.); +#246600 = VERTEX_POINT('',#246601); +#246601 = CARTESIAN_POINT('',(148.577902,-48.0931,1.585)); +#246602 = CIRCLE('',#246603,6.000000000043E-02); +#246603 = AXIS2_PLACEMENT_3D('',#246604,#246605,#246606); +#246604 = CARTESIAN_POINT('',(148.57790222558,-48.0331,1.585)); +#246605 = DIRECTION('',(0.,0.,-1.)); +#246606 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246607 = ORIENTED_EDGE('',*,*,#246608,.T.); +#246608 = EDGE_CURVE('',#246600,#246581,#246609,.T.); +#246609 = LINE('',#246610,#246611); +#246610 = CARTESIAN_POINT('',(148.577902,-48.0931,1.585)); +#246611 = VECTOR('',#246612,1.); +#246612 = DIRECTION('',(-1.,0.,0.)); +#246613 = PLANE('',#246614); +#246614 = AXIS2_PLACEMENT_3D('',#246615,#246616,#246617); +#246615 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246616 = DIRECTION('',(0.,0.,1.)); +#246617 = DIRECTION('',(1.,0.,-0.)); +#246618 = SHELL_BASED_SURFACE_MODEL('',(#246619)); +#246619 = OPEN_SHELL('',(#246620)); +#246620 = ADVANCED_FACE('',(#246621),#246657,.T.); +#246621 = FACE_BOUND('',#246622,.F.); +#246622 = EDGE_LOOP('',(#246623,#246634,#246642,#246651)); +#246623 = ORIENTED_EDGE('',*,*,#246624,.T.); +#246624 = EDGE_CURVE('',#246625,#246627,#246629,.T.); +#246625 = VERTEX_POINT('',#246626); +#246626 = CARTESIAN_POINT('',(194.016892,-47.8606,1.585)); +#246627 = VERTEX_POINT('',#246628); +#246628 = CARTESIAN_POINT('',(194.016892,-47.7406,1.585)); +#246629 = CIRCLE('',#246630,6.000000000042E-02); +#246630 = AXIS2_PLACEMENT_3D('',#246631,#246632,#246633); +#246631 = CARTESIAN_POINT('',(194.01689177441,-47.8006,1.585)); +#246632 = DIRECTION('',(0.,0.,-1.)); +#246633 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246634 = ORIENTED_EDGE('',*,*,#246635,.T.); +#246635 = EDGE_CURVE('',#246627,#246636,#246638,.T.); +#246636 = VERTEX_POINT('',#246637); +#246637 = CARTESIAN_POINT('',(194.491408,-47.7406,1.585)); +#246638 = LINE('',#246639,#246640); +#246639 = CARTESIAN_POINT('',(194.016892,-47.7406,1.585)); +#246640 = VECTOR('',#246641,1.); +#246641 = DIRECTION('',(1.,0.,0.)); +#246642 = ORIENTED_EDGE('',*,*,#246643,.T.); +#246643 = EDGE_CURVE('',#246636,#246644,#246646,.T.); +#246644 = VERTEX_POINT('',#246645); +#246645 = CARTESIAN_POINT('',(194.491408,-47.8606,1.585)); +#246646 = CIRCLE('',#246647,6.000000000043E-02); +#246647 = AXIS2_PLACEMENT_3D('',#246648,#246649,#246650); +#246648 = CARTESIAN_POINT('',(194.49140822558,-47.8006,1.585)); +#246649 = DIRECTION('',(0.,0.,-1.)); +#246650 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246651 = ORIENTED_EDGE('',*,*,#246652,.T.); +#246652 = EDGE_CURVE('',#246644,#246625,#246653,.T.); +#246653 = LINE('',#246654,#246655); +#246654 = CARTESIAN_POINT('',(194.491408,-47.8606,1.585)); +#246655 = VECTOR('',#246656,1.); +#246656 = DIRECTION('',(-1.,0.,0.)); +#246657 = PLANE('',#246658); +#246658 = AXIS2_PLACEMENT_3D('',#246659,#246660,#246661); +#246659 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246660 = DIRECTION('',(0.,0.,1.)); +#246661 = DIRECTION('',(1.,0.,-0.)); +#246662 = SHELL_BASED_SURFACE_MODEL('',(#246663)); +#246663 = OPEN_SHELL('',(#246664)); +#246664 = ADVANCED_FACE('',(#246665),#246701,.T.); +#246665 = FACE_BOUND('',#246666,.F.); +#246666 = EDGE_LOOP('',(#246667,#246678,#246686,#246695)); +#246667 = ORIENTED_EDGE('',*,*,#246668,.T.); +#246668 = EDGE_CURVE('',#246669,#246671,#246673,.T.); +#246669 = VERTEX_POINT('',#246670); +#246670 = CARTESIAN_POINT('',(198.016892,-47.8606,1.585)); +#246671 = VERTEX_POINT('',#246672); +#246672 = CARTESIAN_POINT('',(198.016892,-47.7406,1.585)); +#246673 = CIRCLE('',#246674,6.000000000042E-02); +#246674 = AXIS2_PLACEMENT_3D('',#246675,#246676,#246677); +#246675 = CARTESIAN_POINT('',(198.01689177441,-47.8006,1.585)); +#246676 = DIRECTION('',(0.,0.,-1.)); +#246677 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246678 = ORIENTED_EDGE('',*,*,#246679,.T.); +#246679 = EDGE_CURVE('',#246671,#246680,#246682,.T.); +#246680 = VERTEX_POINT('',#246681); +#246681 = CARTESIAN_POINT('',(198.491408,-47.7406,1.585)); +#246682 = LINE('',#246683,#246684); +#246683 = CARTESIAN_POINT('',(198.016892,-47.7406,1.585)); +#246684 = VECTOR('',#246685,1.); +#246685 = DIRECTION('',(1.,0.,0.)); +#246686 = ORIENTED_EDGE('',*,*,#246687,.T.); +#246687 = EDGE_CURVE('',#246680,#246688,#246690,.T.); +#246688 = VERTEX_POINT('',#246689); +#246689 = CARTESIAN_POINT('',(198.491408,-47.8606,1.585)); +#246690 = CIRCLE('',#246691,6.000000000043E-02); +#246691 = AXIS2_PLACEMENT_3D('',#246692,#246693,#246694); +#246692 = CARTESIAN_POINT('',(198.49140822558,-47.8006,1.585)); +#246693 = DIRECTION('',(0.,0.,-1.)); +#246694 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246695 = ORIENTED_EDGE('',*,*,#246696,.T.); +#246696 = EDGE_CURVE('',#246688,#246669,#246697,.T.); +#246697 = LINE('',#246698,#246699); +#246698 = CARTESIAN_POINT('',(198.491408,-47.8606,1.585)); +#246699 = VECTOR('',#246700,1.); +#246700 = DIRECTION('',(-1.,0.,0.)); +#246701 = PLANE('',#246702); +#246702 = AXIS2_PLACEMENT_3D('',#246703,#246704,#246705); +#246703 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246704 = DIRECTION('',(0.,0.,1.)); +#246705 = DIRECTION('',(1.,0.,-0.)); +#246706 = SHELL_BASED_SURFACE_MODEL('',(#246707)); +#246707 = OPEN_SHELL('',(#246708)); +#246708 = ADVANCED_FACE('',(#246709),#246745,.T.); +#246709 = FACE_BOUND('',#246710,.F.); +#246710 = EDGE_LOOP('',(#246711,#246722,#246730,#246739)); +#246711 = ORIENTED_EDGE('',*,*,#246712,.T.); +#246712 = EDGE_CURVE('',#246713,#246715,#246717,.T.); +#246713 = VERTEX_POINT('',#246714); +#246714 = CARTESIAN_POINT('',(202.016892,-47.8606,1.585)); +#246715 = VERTEX_POINT('',#246716); +#246716 = CARTESIAN_POINT('',(202.016892,-47.7406,1.585)); +#246717 = CIRCLE('',#246718,6.000000000042E-02); +#246718 = AXIS2_PLACEMENT_3D('',#246719,#246720,#246721); +#246719 = CARTESIAN_POINT('',(202.01689177441,-47.8006,1.585)); +#246720 = DIRECTION('',(0.,0.,-1.)); +#246721 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246722 = ORIENTED_EDGE('',*,*,#246723,.T.); +#246723 = EDGE_CURVE('',#246715,#246724,#246726,.T.); +#246724 = VERTEX_POINT('',#246725); +#246725 = CARTESIAN_POINT('',(202.491408,-47.7406,1.585)); +#246726 = LINE('',#246727,#246728); +#246727 = CARTESIAN_POINT('',(202.016892,-47.7406,1.585)); +#246728 = VECTOR('',#246729,1.); +#246729 = DIRECTION('',(1.,0.,0.)); +#246730 = ORIENTED_EDGE('',*,*,#246731,.T.); +#246731 = EDGE_CURVE('',#246724,#246732,#246734,.T.); +#246732 = VERTEX_POINT('',#246733); +#246733 = CARTESIAN_POINT('',(202.491408,-47.8606,1.585)); +#246734 = CIRCLE('',#246735,6.000000000043E-02); +#246735 = AXIS2_PLACEMENT_3D('',#246736,#246737,#246738); +#246736 = CARTESIAN_POINT('',(202.49140822558,-47.8006,1.585)); +#246737 = DIRECTION('',(0.,0.,-1.)); +#246738 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246739 = ORIENTED_EDGE('',*,*,#246740,.T.); +#246740 = EDGE_CURVE('',#246732,#246713,#246741,.T.); +#246741 = LINE('',#246742,#246743); +#246742 = CARTESIAN_POINT('',(202.491408,-47.8606,1.585)); +#246743 = VECTOR('',#246744,1.); +#246744 = DIRECTION('',(-1.,0.,0.)); +#246745 = PLANE('',#246746); +#246746 = AXIS2_PLACEMENT_3D('',#246747,#246748,#246749); +#246747 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246748 = DIRECTION('',(0.,0.,1.)); +#246749 = DIRECTION('',(1.,0.,-0.)); +#246750 = SHELL_BASED_SURFACE_MODEL('',(#246751)); +#246751 = OPEN_SHELL('',(#246752)); +#246752 = ADVANCED_FACE('',(#246753),#246789,.T.); +#246753 = FACE_BOUND('',#246754,.F.); +#246754 = EDGE_LOOP('',(#246755,#246766,#246774,#246783)); +#246755 = ORIENTED_EDGE('',*,*,#246756,.T.); +#246756 = EDGE_CURVE('',#246757,#246759,#246761,.T.); +#246757 = VERTEX_POINT('',#246758); +#246758 = CARTESIAN_POINT('',(206.016892,-47.8606,1.585)); +#246759 = VERTEX_POINT('',#246760); +#246760 = CARTESIAN_POINT('',(206.016892,-47.7406,1.585)); +#246761 = CIRCLE('',#246762,6.000000000042E-02); +#246762 = AXIS2_PLACEMENT_3D('',#246763,#246764,#246765); +#246763 = CARTESIAN_POINT('',(206.01689177441,-47.8006,1.585)); +#246764 = DIRECTION('',(0.,0.,-1.)); +#246765 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246766 = ORIENTED_EDGE('',*,*,#246767,.T.); +#246767 = EDGE_CURVE('',#246759,#246768,#246770,.T.); +#246768 = VERTEX_POINT('',#246769); +#246769 = CARTESIAN_POINT('',(206.491408,-47.7406,1.585)); +#246770 = LINE('',#246771,#246772); +#246771 = CARTESIAN_POINT('',(206.016892,-47.7406,1.585)); +#246772 = VECTOR('',#246773,1.); +#246773 = DIRECTION('',(1.,0.,0.)); +#246774 = ORIENTED_EDGE('',*,*,#246775,.T.); +#246775 = EDGE_CURVE('',#246768,#246776,#246778,.T.); +#246776 = VERTEX_POINT('',#246777); +#246777 = CARTESIAN_POINT('',(206.491408,-47.8606,1.585)); +#246778 = CIRCLE('',#246779,6.000000000043E-02); +#246779 = AXIS2_PLACEMENT_3D('',#246780,#246781,#246782); +#246780 = CARTESIAN_POINT('',(206.49140822558,-47.8006,1.585)); +#246781 = DIRECTION('',(0.,0.,-1.)); +#246782 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246783 = ORIENTED_EDGE('',*,*,#246784,.T.); +#246784 = EDGE_CURVE('',#246776,#246757,#246785,.T.); +#246785 = LINE('',#246786,#246787); +#246786 = CARTESIAN_POINT('',(206.491408,-47.8606,1.585)); +#246787 = VECTOR('',#246788,1.); +#246788 = DIRECTION('',(-1.,0.,0.)); +#246789 = PLANE('',#246790); +#246790 = AXIS2_PLACEMENT_3D('',#246791,#246792,#246793); +#246791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246792 = DIRECTION('',(0.,0.,1.)); +#246793 = DIRECTION('',(1.,0.,-0.)); +#246794 = SHELL_BASED_SURFACE_MODEL('',(#246795)); +#246795 = OPEN_SHELL('',(#246796)); +#246796 = ADVANCED_FACE('',(#246797),#246931,.T.); +#246797 = FACE_BOUND('',#246798,.F.); +#246798 = EDGE_LOOP('',(#246799,#246809,#246817,#246826,#246834,#246842, + #246851,#246859,#246868,#246876,#246884,#246892,#246900,#246909, + #246917,#246925)); +#246799 = ORIENTED_EDGE('',*,*,#246800,.T.); +#246800 = EDGE_CURVE('',#246801,#246803,#246805,.T.); +#246801 = VERTEX_POINT('',#246802); +#246802 = CARTESIAN_POINT('',(195.201062,-46.294941,1.585)); +#246803 = VERTEX_POINT('',#246804); +#246804 = CARTESIAN_POINT('',(195.239518,-46.27436,1.585)); +#246805 = LINE('',#246806,#246807); +#246806 = CARTESIAN_POINT('',(195.201062,-46.294941,1.585)); +#246807 = VECTOR('',#246808,1.); +#246808 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#246809 = ORIENTED_EDGE('',*,*,#246810,.T.); +#246810 = EDGE_CURVE('',#246803,#246811,#246813,.T.); +#246811 = VERTEX_POINT('',#246812); +#246812 = CARTESIAN_POINT('',(195.261355,-46.27436,1.585)); +#246813 = LINE('',#246814,#246815); +#246814 = CARTESIAN_POINT('',(195.239518,-46.27436,1.585)); +#246815 = VECTOR('',#246816,1.); +#246816 = DIRECTION('',(1.,0.,0.)); +#246817 = ORIENTED_EDGE('',*,*,#246818,.T.); +#246818 = EDGE_CURVE('',#246811,#246819,#246821,.T.); +#246819 = VERTEX_POINT('',#246820); +#246820 = CARTESIAN_POINT('',(195.32915,-46.347919,1.585)); +#246821 = CIRCLE('',#246822,7.216898094224E-02); +#246822 = AXIS2_PLACEMENT_3D('',#246823,#246824,#246825); +#246823 = CARTESIAN_POINT('',(195.25699706389,-46.34639728342,1.585)); +#246824 = DIRECTION('',(0.,0.,-1.)); +#246825 = DIRECTION('',(6.038516895228E-02,0.998175150648,0.)); +#246826 = ORIENTED_EDGE('',*,*,#246827,.T.); +#246827 = EDGE_CURVE('',#246819,#246828,#246830,.T.); +#246828 = VERTEX_POINT('',#246829); +#246829 = CARTESIAN_POINT('',(195.32915,-47.272919,1.585)); +#246830 = LINE('',#246831,#246832); +#246831 = CARTESIAN_POINT('',(195.32915,-46.347919,1.585)); +#246832 = VECTOR('',#246833,1.); +#246833 = DIRECTION('',(0.,-1.,0.)); +#246834 = ORIENTED_EDGE('',*,*,#246835,.T.); +#246835 = EDGE_CURVE('',#246828,#246836,#246838,.T.); +#246836 = VERTEX_POINT('',#246837); +#246837 = CARTESIAN_POINT('',(195.554496,-47.27436,1.585)); +#246838 = LINE('',#246839,#246840); +#246839 = CARTESIAN_POINT('',(195.32915,-47.272919,1.585)); +#246840 = VECTOR('',#246841,1.); +#246841 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#246842 = ORIENTED_EDGE('',*,*,#246843,.T.); +#246843 = EDGE_CURVE('',#246836,#246844,#246846,.T.); +#246844 = VERTEX_POINT('',#246845); +#246845 = CARTESIAN_POINT('',(195.539864,-47.422919,1.585)); +#246846 = CIRCLE('',#246847,7.500006711464E-02); +#246847 = AXIS2_PLACEMENT_3D('',#246848,#246849,#246850); +#246848 = CARTESIAN_POINT('',(195.53986406711,-47.34791893288,1.585)); +#246849 = DIRECTION('',(0.,0.,-1.)); +#246850 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#246851 = ORIENTED_EDGE('',*,*,#246852,.T.); +#246852 = EDGE_CURVE('',#246844,#246853,#246855,.T.); +#246853 = VERTEX_POINT('',#246854); +#246854 = CARTESIAN_POINT('',(194.953804,-47.421478,1.585)); +#246855 = LINE('',#246856,#246857); +#246856 = CARTESIAN_POINT('',(195.539864,-47.422919,1.585)); +#246857 = VECTOR('',#246858,1.); +#246858 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#246859 = ORIENTED_EDGE('',*,*,#246860,.T.); +#246860 = EDGE_CURVE('',#246853,#246861,#246863,.T.); +#246861 = VERTEX_POINT('',#246862); +#246862 = CARTESIAN_POINT('',(194.968436,-47.272919,1.585)); +#246863 = CIRCLE('',#246864,7.500006711464E-02); +#246864 = AXIS2_PLACEMENT_3D('',#246865,#246866,#246867); +#246865 = CARTESIAN_POINT('',(194.96843593288,-47.34791906711,1.585)); +#246866 = DIRECTION('',(0.,0.,-1.)); +#246867 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#246868 = ORIENTED_EDGE('',*,*,#246869,.T.); +#246869 = EDGE_CURVE('',#246861,#246870,#246872,.T.); +#246870 = VERTEX_POINT('',#246871); +#246871 = CARTESIAN_POINT('',(195.17915,-47.272919,1.585)); +#246872 = LINE('',#246873,#246874); +#246873 = CARTESIAN_POINT('',(194.968436,-47.272919,1.585)); +#246874 = VECTOR('',#246875,1.); +#246875 = DIRECTION('',(1.,0.,0.)); +#246876 = ORIENTED_EDGE('',*,*,#246877,.T.); +#246877 = EDGE_CURVE('',#246870,#246878,#246880,.T.); +#246878 = VERTEX_POINT('',#246879); +#246879 = CARTESIAN_POINT('',(195.17915,-46.576604,1.585)); +#246880 = LINE('',#246881,#246882); +#246881 = CARTESIAN_POINT('',(195.17915,-47.272919,1.585)); +#246882 = VECTOR('',#246883,1.); +#246883 = DIRECTION('',(0.,1.,0.)); +#246884 = ORIENTED_EDGE('',*,*,#246885,.T.); +#246885 = EDGE_CURVE('',#246878,#246886,#246888,.T.); +#246886 = VERTEX_POINT('',#246887); +#246887 = CARTESIAN_POINT('',(195.103514,-46.649131,1.585)); +#246888 = LINE('',#246889,#246890); +#246889 = CARTESIAN_POINT('',(195.17915,-46.576604,1.585)); +#246890 = VECTOR('',#246891,1.); +#246891 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#246892 = ORIENTED_EDGE('',*,*,#246893,.T.); +#246893 = EDGE_CURVE('',#246886,#246894,#246896,.T.); +#246894 = VERTEX_POINT('',#246895); +#246895 = CARTESIAN_POINT('',(194.988245,-46.70597,1.585)); +#246896 = LINE('',#246897,#246898); +#246897 = CARTESIAN_POINT('',(195.103514,-46.649131,1.585)); +#246898 = VECTOR('',#246899,1.); +#246899 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#246900 = ORIENTED_EDGE('',*,*,#246901,.T.); +#246901 = EDGE_CURVE('',#246894,#246902,#246904,.T.); +#246902 = VERTEX_POINT('',#246903); +#246903 = CARTESIAN_POINT('',(194.934895,-46.566551,1.585)); +#246904 = CIRCLE('',#246905,7.500005272361E-02); +#246905 = AXIS2_PLACEMENT_3D('',#246906,#246907,#246908); +#246906 = CARTESIAN_POINT('',(194.96843555676,-46.63363332972,1.585)); +#246907 = DIRECTION('',(0.,0.,-1.)); +#246908 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#246909 = ORIENTED_EDGE('',*,*,#246910,.T.); +#246910 = EDGE_CURVE('',#246902,#246911,#246913,.T.); +#246911 = VERTEX_POINT('',#246912); +#246912 = CARTESIAN_POINT('',(195.019247,-46.524375,1.585)); +#246913 = LINE('',#246914,#246915); +#246914 = CARTESIAN_POINT('',(194.934895,-46.566551,1.585)); +#246915 = VECTOR('',#246916,1.); +#246916 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#246917 = ORIENTED_EDGE('',*,*,#246918,.T.); +#246918 = EDGE_CURVE('',#246911,#246919,#246921,.T.); +#246919 = VERTEX_POINT('',#246920); +#246920 = CARTESIAN_POINT('',(195.100626,-46.442996,1.585)); +#246921 = LINE('',#246922,#246923); +#246922 = CARTESIAN_POINT('',(195.019247,-46.524375,1.585)); +#246923 = VECTOR('',#246924,1.); +#246924 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246925 = ORIENTED_EDGE('',*,*,#246926,.T.); +#246926 = EDGE_CURVE('',#246919,#246801,#246927,.T.); +#246927 = LINE('',#246928,#246929); +#246928 = CARTESIAN_POINT('',(195.100626,-46.442996,1.585)); +#246929 = VECTOR('',#246930,1.); +#246930 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#246931 = PLANE('',#246932); +#246932 = AXIS2_PLACEMENT_3D('',#246933,#246934,#246935); +#246933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246934 = DIRECTION('',(0.,0.,1.)); +#246935 = DIRECTION('',(1.,0.,-0.)); +#246936 = SHELL_BASED_SURFACE_MODEL('',(#246937)); +#246937 = OPEN_SHELL('',(#246938)); +#246938 = ADVANCED_FACE('',(#246939),#247098,.T.); +#246939 = FACE_BOUND('',#246940,.F.); +#246940 = EDGE_LOOP('',(#246941,#246952,#246960,#246968,#246976,#246984, + #246992,#247000,#247009,#247017,#247026,#247034,#247042,#247050, + #247059,#247067,#247075,#247083,#247092)); +#246941 = ORIENTED_EDGE('',*,*,#246942,.T.); +#246942 = EDGE_CURVE('',#246943,#246945,#246947,.T.); +#246943 = VERTEX_POINT('',#246944); +#246944 = CARTESIAN_POINT('',(198.982514,-46.328456,1.585)); +#246945 = VERTEX_POINT('',#246946); +#246946 = CARTESIAN_POINT('',(199.491909,-46.337786,1.585)); +#246947 = CIRCLE('',#246948,0.450326844012); +#246948 = AXIS2_PLACEMENT_3D('',#246949,#246950,#246951); +#246949 = CARTESIAN_POINT('',(199.2304110301,-46.70440989199,1.585)); +#246950 = DIRECTION('',(0.,0.,-1.)); +#246951 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#246952 = ORIENTED_EDGE('',*,*,#246953,.T.); +#246953 = EDGE_CURVE('',#246945,#246954,#246956,.T.); +#246954 = VERTEX_POINT('',#246955); +#246955 = CARTESIAN_POINT('',(199.555362,-46.403316,1.585)); +#246956 = LINE('',#246957,#246958); +#246957 = CARTESIAN_POINT('',(199.491909,-46.337786,1.585)); +#246958 = VECTOR('',#246959,1.); +#246959 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#246960 = ORIENTED_EDGE('',*,*,#246961,.T.); +#246961 = EDGE_CURVE('',#246954,#246962,#246964,.T.); +#246962 = VERTEX_POINT('',#246963); +#246963 = CARTESIAN_POINT('',(199.613423,-46.523763,1.585)); +#246964 = LINE('',#246965,#246966); +#246965 = CARTESIAN_POINT('',(199.555362,-46.403316,1.585)); +#246966 = VECTOR('',#246967,1.); +#246967 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#246968 = ORIENTED_EDGE('',*,*,#246969,.T.); +#246969 = EDGE_CURVE('',#246962,#246970,#246972,.T.); +#246970 = VERTEX_POINT('',#246971); +#246971 = CARTESIAN_POINT('',(199.612664,-46.650095,1.585)); +#246972 = LINE('',#246973,#246974); +#246973 = CARTESIAN_POINT('',(199.613423,-46.523763,1.585)); +#246974 = VECTOR('',#246975,1.); +#246975 = DIRECTION('',(-6.007870547659E-03,-0.999981952583,0.)); +#246976 = ORIENTED_EDGE('',*,*,#246977,.T.); +#246977 = EDGE_CURVE('',#246970,#246978,#246980,.T.); +#246978 = VERTEX_POINT('',#246979); +#246979 = CARTESIAN_POINT('',(199.554606,-46.818158,1.585)); +#246980 = LINE('',#246981,#246982); +#246981 = CARTESIAN_POINT('',(199.612664,-46.650095,1.585)); +#246982 = VECTOR('',#246983,1.); +#246983 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#246984 = ORIENTED_EDGE('',*,*,#246985,.T.); +#246985 = EDGE_CURVE('',#246978,#246986,#246988,.T.); +#246986 = VERTEX_POINT('',#246987); +#246987 = CARTESIAN_POINT('',(199.101883,-47.272919,1.585)); +#246988 = LINE('',#246989,#246990); +#246989 = CARTESIAN_POINT('',(199.554606,-46.818158,1.585)); +#246990 = VECTOR('',#246991,1.); +#246991 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#246992 = ORIENTED_EDGE('',*,*,#246993,.T.); +#246993 = EDGE_CURVE('',#246986,#246994,#246996,.T.); +#246994 = VERTEX_POINT('',#246995); +#246995 = CARTESIAN_POINT('',(199.554496,-47.27436,1.585)); +#246996 = LINE('',#246997,#246998); +#246997 = CARTESIAN_POINT('',(199.101883,-47.272919,1.585)); +#246998 = VECTOR('',#246999,1.); +#246999 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#247000 = ORIENTED_EDGE('',*,*,#247001,.T.); +#247001 = EDGE_CURVE('',#246994,#247002,#247004,.T.); +#247002 = VERTEX_POINT('',#247003); +#247003 = CARTESIAN_POINT('',(199.539864,-47.422919,1.585)); +#247004 = CIRCLE('',#247005,7.500006711464E-02); +#247005 = AXIS2_PLACEMENT_3D('',#247006,#247007,#247008); +#247006 = CARTESIAN_POINT('',(199.53986406711,-47.34791893288,1.585)); +#247007 = DIRECTION('',(0.,0.,-1.)); +#247008 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#247009 = ORIENTED_EDGE('',*,*,#247010,.T.); +#247010 = EDGE_CURVE('',#247002,#247011,#247013,.T.); +#247011 = VERTEX_POINT('',#247012); +#247012 = CARTESIAN_POINT('',(198.906185,-47.421478,1.585)); +#247013 = LINE('',#247014,#247015); +#247014 = CARTESIAN_POINT('',(199.539864,-47.422919,1.585)); +#247015 = VECTOR('',#247016,1.); +#247016 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#247017 = ORIENTED_EDGE('',*,*,#247018,.T.); +#247018 = EDGE_CURVE('',#247011,#247019,#247021,.T.); +#247019 = VERTEX_POINT('',#247020); +#247020 = CARTESIAN_POINT('',(198.867784,-47.294886,1.585)); +#247021 = CIRCLE('',#247022,7.500021013109E-02); +#247022 = AXIS2_PLACEMENT_3D('',#247023,#247024,#247025); +#247023 = CARTESIAN_POINT('',(198.9208173167,-47.34791899764,1.585)); +#247024 = DIRECTION('',(0.,0.,-1.)); +#247025 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#247026 = ORIENTED_EDGE('',*,*,#247027,.T.); +#247027 = EDGE_CURVE('',#247019,#247028,#247030,.T.); +#247028 = VERTEX_POINT('',#247029); +#247029 = CARTESIAN_POINT('',(199.426692,-46.735976,1.585)); +#247030 = LINE('',#247031,#247032); +#247031 = CARTESIAN_POINT('',(198.867784,-47.294886,1.585)); +#247032 = VECTOR('',#247033,1.); +#247033 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#247034 = ORIENTED_EDGE('',*,*,#247035,.T.); +#247035 = EDGE_CURVE('',#247028,#247036,#247038,.T.); +#247036 = VERTEX_POINT('',#247037); +#247037 = CARTESIAN_POINT('',(199.464864,-46.621463,1.585)); +#247038 = LINE('',#247039,#247040); +#247039 = CARTESIAN_POINT('',(199.426692,-46.735976,1.585)); +#247040 = VECTOR('',#247041,1.); +#247041 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#247042 = ORIENTED_EDGE('',*,*,#247043,.T.); +#247043 = EDGE_CURVE('',#247036,#247044,#247046,.T.); +#247044 = VERTEX_POINT('',#247045); +#247045 = CARTESIAN_POINT('',(199.464864,-46.5561,1.585)); +#247046 = LINE('',#247047,#247048); +#247047 = CARTESIAN_POINT('',(199.464864,-46.621463,1.585)); +#247048 = VECTOR('',#247049,1.); +#247049 = DIRECTION('',(0.,1.,0.)); +#247050 = ORIENTED_EDGE('',*,*,#247051,.T.); +#247051 = EDGE_CURVE('',#247044,#247052,#247054,.T.); +#247052 = VERTEX_POINT('',#247053); +#247053 = CARTESIAN_POINT('',(199.331683,-46.422919,1.585)); +#247054 = CIRCLE('',#247055,0.18686440374); +#247055 = AXIS2_PLACEMENT_3D('',#247056,#247057,#247058); +#247056 = CARTESIAN_POINT('',(199.284147,-46.603636,1.585)); +#247057 = DIRECTION('',(0.,0.,1.)); +#247058 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247059 = ORIENTED_EDGE('',*,*,#247060,.T.); +#247060 = EDGE_CURVE('',#247052,#247061,#247063,.T.); +#247061 = VERTEX_POINT('',#247062); +#247062 = CARTESIAN_POINT('',(199.128998,-46.422919,1.585)); +#247063 = LINE('',#247064,#247065); +#247064 = CARTESIAN_POINT('',(199.331683,-46.422919,1.585)); +#247065 = VECTOR('',#247066,1.); +#247066 = DIRECTION('',(-1.,0.,0.)); +#247067 = ORIENTED_EDGE('',*,*,#247068,.T.); +#247068 = EDGE_CURVE('',#247061,#247069,#247071,.T.); +#247069 = VERTEX_POINT('',#247070); +#247070 = CARTESIAN_POINT('',(199.060482,-46.457177,1.585)); +#247071 = LINE('',#247072,#247073); +#247072 = CARTESIAN_POINT('',(199.128998,-46.422919,1.585)); +#247073 = VECTOR('',#247074,1.); +#247074 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#247075 = ORIENTED_EDGE('',*,*,#247076,.T.); +#247076 = EDGE_CURVE('',#247069,#247077,#247079,.T.); +#247077 = VERTEX_POINT('',#247078); +#247078 = CARTESIAN_POINT('',(199.010104,-46.505517,1.585)); +#247079 = LINE('',#247080,#247081); +#247080 = CARTESIAN_POINT('',(199.060482,-46.457177,1.585)); +#247081 = VECTOR('',#247082,1.); +#247082 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#247083 = ORIENTED_EDGE('',*,*,#247084,.T.); +#247084 = EDGE_CURVE('',#247077,#247085,#247087,.T.); +#247085 = VERTEX_POINT('',#247086); +#247086 = CARTESIAN_POINT('',(198.915403,-46.390124,1.585)); +#247087 = CIRCLE('',#247088,7.499996838527E-02); +#247088 = AXIS2_PLACEMENT_3D('',#247089,#247090,#247091); +#247089 = CARTESIAN_POINT('',(198.968436,-46.44315697246,1.585)); +#247090 = DIRECTION('',(0.,0.,-1.)); +#247091 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#247092 = ORIENTED_EDGE('',*,*,#247093,.T.); +#247093 = EDGE_CURVE('',#247085,#246943,#247094,.T.); +#247094 = LINE('',#247095,#247096); +#247095 = CARTESIAN_POINT('',(198.915403,-46.390124,1.585)); +#247096 = VECTOR('',#247097,1.); +#247097 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#247098 = PLANE('',#247099); +#247099 = AXIS2_PLACEMENT_3D('',#247100,#247101,#247102); +#247100 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247101 = DIRECTION('',(0.,0.,1.)); +#247102 = DIRECTION('',(1.,0.,-0.)); +#247103 = SHELL_BASED_SURFACE_MODEL('',(#247104)); +#247104 = OPEN_SHELL('',(#247105)); +#247105 = ADVANCED_FACE('',(#247106,#247217),#247269,.T.); +#247106 = FACE_BOUND('',#247107,.F.); +#247107 = EDGE_LOOP('',(#247108,#247119,#247127,#247136,#247144,#247153, + #247161,#247169,#247178,#247186,#247194,#247202,#247211)); +#247108 = ORIENTED_EDGE('',*,*,#247109,.T.); +#247109 = EDGE_CURVE('',#247110,#247112,#247114,.T.); +#247110 = VERTEX_POINT('',#247111); +#247111 = CARTESIAN_POINT('',(192.942496,-46.333287,1.585)); +#247112 = VERTEX_POINT('',#247113); +#247113 = CARTESIAN_POINT('',(193.016055,-46.272919,1.585)); +#247114 = CIRCLE('',#247115,7.500074938986E-02); +#247115 = AXIS2_PLACEMENT_3D('',#247116,#247117,#247118); +#247116 = CARTESIAN_POINT('',(193.01605546611,-46.34791974938,1.585)); +#247117 = DIRECTION('',(0.,0.,-1.)); +#247118 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247119 = ORIENTED_EDGE('',*,*,#247120,.T.); +#247120 = EDGE_CURVE('',#247112,#247121,#247123,.T.); +#247121 = VERTEX_POINT('',#247122); +#247122 = CARTESIAN_POINT('',(193.411639,-46.27436,1.585)); +#247123 = LINE('',#247124,#247125); +#247124 = CARTESIAN_POINT('',(193.016055,-46.272919,1.585)); +#247125 = VECTOR('',#247126,1.); +#247126 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247127 = ORIENTED_EDGE('',*,*,#247128,.T.); +#247128 = EDGE_CURVE('',#247121,#247129,#247131,.T.); +#247129 = VERTEX_POINT('',#247130); +#247130 = CARTESIAN_POINT('',(193.661042,-46.523763,1.585)); +#247131 = CIRCLE('',#247132,0.347870264855); +#247132 = AXIS2_PLACEMENT_3D('',#247133,#247134,#247135); +#247133 = CARTESIAN_POINT('',(193.32431126502,-46.61109073497,1.585)); +#247134 = DIRECTION('',(0.,0.,-1.)); +#247135 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247136 = ORIENTED_EDGE('',*,*,#247137,.T.); +#247137 = EDGE_CURVE('',#247129,#247138,#247140,.T.); +#247138 = VERTEX_POINT('',#247139); +#247139 = CARTESIAN_POINT('',(193.65982,-46.701062,1.585)); +#247140 = LINE('',#247141,#247142); +#247141 = CARTESIAN_POINT('',(193.661042,-46.523763,1.585)); +#247142 = VECTOR('',#247143,1.); +#247143 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247144 = ORIENTED_EDGE('',*,*,#247145,.T.); +#247145 = EDGE_CURVE('',#247138,#247146,#247148,.T.); +#247146 = VERTEX_POINT('',#247147); +#247147 = CARTESIAN_POINT('',(193.411639,-46.945287,1.585)); +#247148 = CIRCLE('',#247149,0.348632345849); +#247149 = AXIS2_PLACEMENT_3D('',#247150,#247151,#247152); +#247150 = CARTESIAN_POINT('',(193.32387019403,-46.6078834593,1.585)); +#247151 = DIRECTION('',(0.,0.,-1.)); +#247152 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247153 = ORIENTED_EDGE('',*,*,#247154,.T.); +#247154 = EDGE_CURVE('',#247146,#247155,#247157,.T.); +#247155 = VERTEX_POINT('',#247156); +#247156 = CARTESIAN_POINT('',(193.398122,-46.946618,1.585)); +#247157 = LINE('',#247158,#247159); +#247158 = CARTESIAN_POINT('',(193.411639,-46.945287,1.585)); +#247159 = VECTOR('',#247160,1.); +#247160 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247161 = ORIENTED_EDGE('',*,*,#247162,.T.); +#247162 = EDGE_CURVE('',#247155,#247163,#247165,.T.); +#247163 = VERTEX_POINT('',#247164); +#247164 = CARTESIAN_POINT('',(193.656136,-47.317723,1.585)); +#247165 = LINE('',#247166,#247167); +#247166 = CARTESIAN_POINT('',(193.398122,-46.946618,1.585)); +#247167 = VECTOR('',#247168,1.); +#247168 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247169 = ORIENTED_EDGE('',*,*,#247170,.T.); +#247170 = EDGE_CURVE('',#247163,#247171,#247173,.T.); +#247171 = VERTEX_POINT('',#247172); +#247172 = CARTESIAN_POINT('',(193.526041,-47.390929,1.585)); +#247173 = CIRCLE('',#247174,7.500005951702E-02); +#247174 = AXIS2_PLACEMENT_3D('',#247175,#247176,#247177); +#247175 = CARTESIAN_POINT('',(193.58748306294,-47.34791874739,1.585)); +#247176 = DIRECTION('',(0.,0.,-1.)); +#247177 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247178 = ORIENTED_EDGE('',*,*,#247179,.T.); +#247179 = EDGE_CURVE('',#247171,#247180,#247182,.T.); +#247180 = VERTEX_POINT('',#247181); +#247181 = CARTESIAN_POINT('',(193.215101,-46.946728,1.585)); +#247182 = LINE('',#247183,#247184); +#247183 = CARTESIAN_POINT('',(193.526041,-47.390929,1.585)); +#247184 = VECTOR('',#247185,1.); +#247185 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247186 = ORIENTED_EDGE('',*,*,#247187,.T.); +#247187 = EDGE_CURVE('',#247180,#247188,#247190,.T.); +#247188 = VERTEX_POINT('',#247189); +#247189 = CARTESIAN_POINT('',(193.091055,-46.946728,1.585)); +#247190 = LINE('',#247191,#247192); +#247191 = CARTESIAN_POINT('',(193.215101,-46.946728,1.585)); +#247192 = VECTOR('',#247193,1.); +#247193 = DIRECTION('',(-1.,0.,0.)); +#247194 = ORIENTED_EDGE('',*,*,#247195,.T.); +#247195 = EDGE_CURVE('',#247188,#247196,#247198,.T.); +#247196 = VERTEX_POINT('',#247197); +#247197 = CARTESIAN_POINT('',(193.089614,-47.362551,1.585)); +#247198 = LINE('',#247199,#247200); +#247199 = CARTESIAN_POINT('',(193.091055,-46.946728,1.585)); +#247200 = VECTOR('',#247201,1.); +#247201 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247202 = ORIENTED_EDGE('',*,*,#247203,.T.); +#247203 = EDGE_CURVE('',#247196,#247204,#247206,.T.); +#247204 = VERTEX_POINT('',#247205); +#247205 = CARTESIAN_POINT('',(192.941055,-47.347919,1.585)); +#247206 = CIRCLE('',#247207,7.500006711464E-02); +#247207 = AXIS2_PLACEMENT_3D('',#247208,#247209,#247210); +#247208 = CARTESIAN_POINT('',(193.01605506711,-47.34791906711,1.585)); +#247209 = DIRECTION('',(-0.,0.,-1.)); +#247210 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247211 = ORIENTED_EDGE('',*,*,#247212,.T.); +#247212 = EDGE_CURVE('',#247204,#247110,#247213,.T.); +#247213 = LINE('',#247214,#247215); +#247214 = CARTESIAN_POINT('',(192.941055,-47.347919,1.585)); +#247215 = VECTOR('',#247216,1.); +#247216 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247217 = FACE_BOUND('',#247218,.F.); +#247218 = EDGE_LOOP('',(#247219,#247230,#247238,#247246,#247254,#247263) + ); +#247219 = ORIENTED_EDGE('',*,*,#247220,.T.); +#247220 = EDGE_CURVE('',#247221,#247223,#247225,.T.); +#247221 = VERTEX_POINT('',#247222); +#247222 = CARTESIAN_POINT('',(193.512483,-46.5561,1.585)); +#247223 = VERTEX_POINT('',#247224); +#247224 = CARTESIAN_POINT('',(193.379302,-46.422919,1.585)); +#247225 = CIRCLE('',#247226,0.18686440374); +#247226 = AXIS2_PLACEMENT_3D('',#247227,#247228,#247229); +#247227 = CARTESIAN_POINT('',(193.331766,-46.603636,1.585)); +#247228 = DIRECTION('',(0.,0.,1.)); +#247229 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247230 = ORIENTED_EDGE('',*,*,#247231,.T.); +#247231 = EDGE_CURVE('',#247223,#247232,#247234,.T.); +#247232 = VERTEX_POINT('',#247233); +#247233 = CARTESIAN_POINT('',(193.091055,-46.422919,1.585)); +#247234 = LINE('',#247235,#247236); +#247235 = CARTESIAN_POINT('',(193.379302,-46.422919,1.585)); +#247236 = VECTOR('',#247237,1.); +#247237 = DIRECTION('',(-1.,0.,0.)); +#247238 = ORIENTED_EDGE('',*,*,#247239,.T.); +#247239 = EDGE_CURVE('',#247232,#247240,#247242,.T.); +#247240 = VERTEX_POINT('',#247241); +#247241 = CARTESIAN_POINT('',(193.091055,-46.796728,1.585)); +#247242 = LINE('',#247243,#247244); +#247243 = CARTESIAN_POINT('',(193.091055,-46.422919,1.585)); +#247244 = VECTOR('',#247245,1.); +#247245 = DIRECTION('',(0.,-1.,0.)); +#247246 = ORIENTED_EDGE('',*,*,#247247,.T.); +#247247 = EDGE_CURVE('',#247240,#247248,#247250,.T.); +#247248 = VERTEX_POINT('',#247249); +#247249 = CARTESIAN_POINT('',(193.379302,-46.796728,1.585)); +#247250 = LINE('',#247251,#247252); +#247251 = CARTESIAN_POINT('',(193.091055,-46.796728,1.585)); +#247252 = VECTOR('',#247253,1.); +#247253 = DIRECTION('',(1.,0.,0.)); +#247254 = ORIENTED_EDGE('',*,*,#247255,.T.); +#247255 = EDGE_CURVE('',#247248,#247256,#247258,.T.); +#247256 = VERTEX_POINT('',#247257); +#247257 = CARTESIAN_POINT('',(193.512483,-46.663547,1.585)); +#247258 = CIRCLE('',#247259,0.18686440374); +#247259 = AXIS2_PLACEMENT_3D('',#247260,#247261,#247262); +#247260 = CARTESIAN_POINT('',(193.331766,-46.616011,1.585)); +#247261 = DIRECTION('',(0.,0.,1.)); +#247262 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247263 = ORIENTED_EDGE('',*,*,#247264,.T.); +#247264 = EDGE_CURVE('',#247256,#247221,#247265,.T.); +#247265 = LINE('',#247266,#247267); +#247266 = CARTESIAN_POINT('',(193.512483,-46.663547,1.585)); +#247267 = VECTOR('',#247268,1.); +#247268 = DIRECTION('',(0.,1.,0.)); +#247269 = PLANE('',#247270); +#247270 = AXIS2_PLACEMENT_3D('',#247271,#247272,#247273); +#247271 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247272 = DIRECTION('',(0.,0.,1.)); +#247273 = DIRECTION('',(1.,0.,-0.)); +#247274 = SHELL_BASED_SURFACE_MODEL('',(#247275)); +#247275 = OPEN_SHELL('',(#247276)); +#247276 = ADVANCED_FACE('',(#247277,#247388),#247440,.T.); +#247277 = FACE_BOUND('',#247278,.F.); +#247278 = EDGE_LOOP('',(#247279,#247290,#247298,#247307,#247315,#247324, + #247332,#247340,#247349,#247357,#247365,#247373,#247382)); +#247279 = ORIENTED_EDGE('',*,*,#247280,.T.); +#247280 = EDGE_CURVE('',#247281,#247283,#247285,.T.); +#247281 = VERTEX_POINT('',#247282); +#247282 = CARTESIAN_POINT('',(196.942496,-46.333287,1.585)); +#247283 = VERTEX_POINT('',#247284); +#247284 = CARTESIAN_POINT('',(197.016055,-46.272919,1.585)); +#247285 = CIRCLE('',#247286,7.500074938986E-02); +#247286 = AXIS2_PLACEMENT_3D('',#247287,#247288,#247289); +#247287 = CARTESIAN_POINT('',(197.01605546611,-46.34791974938,1.585)); +#247288 = DIRECTION('',(0.,0.,-1.)); +#247289 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247290 = ORIENTED_EDGE('',*,*,#247291,.T.); +#247291 = EDGE_CURVE('',#247283,#247292,#247294,.T.); +#247292 = VERTEX_POINT('',#247293); +#247293 = CARTESIAN_POINT('',(197.411639,-46.27436,1.585)); +#247294 = LINE('',#247295,#247296); +#247295 = CARTESIAN_POINT('',(197.016055,-46.272919,1.585)); +#247296 = VECTOR('',#247297,1.); +#247297 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247298 = ORIENTED_EDGE('',*,*,#247299,.T.); +#247299 = EDGE_CURVE('',#247292,#247300,#247302,.T.); +#247300 = VERTEX_POINT('',#247301); +#247301 = CARTESIAN_POINT('',(197.661042,-46.523763,1.585)); +#247302 = CIRCLE('',#247303,0.347870264855); +#247303 = AXIS2_PLACEMENT_3D('',#247304,#247305,#247306); +#247304 = CARTESIAN_POINT('',(197.32431126502,-46.61109073497,1.585)); +#247305 = DIRECTION('',(0.,0.,-1.)); +#247306 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247307 = ORIENTED_EDGE('',*,*,#247308,.T.); +#247308 = EDGE_CURVE('',#247300,#247309,#247311,.T.); +#247309 = VERTEX_POINT('',#247310); +#247310 = CARTESIAN_POINT('',(197.65982,-46.701062,1.585)); +#247311 = LINE('',#247312,#247313); +#247312 = CARTESIAN_POINT('',(197.661042,-46.523763,1.585)); +#247313 = VECTOR('',#247314,1.); +#247314 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247315 = ORIENTED_EDGE('',*,*,#247316,.T.); +#247316 = EDGE_CURVE('',#247309,#247317,#247319,.T.); +#247317 = VERTEX_POINT('',#247318); +#247318 = CARTESIAN_POINT('',(197.411639,-46.945287,1.585)); +#247319 = CIRCLE('',#247320,0.348632345849); +#247320 = AXIS2_PLACEMENT_3D('',#247321,#247322,#247323); +#247321 = CARTESIAN_POINT('',(197.32387019403,-46.6078834593,1.585)); +#247322 = DIRECTION('',(0.,0.,-1.)); +#247323 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247324 = ORIENTED_EDGE('',*,*,#247325,.T.); +#247325 = EDGE_CURVE('',#247317,#247326,#247328,.T.); +#247326 = VERTEX_POINT('',#247327); +#247327 = CARTESIAN_POINT('',(197.398122,-46.946618,1.585)); +#247328 = LINE('',#247329,#247330); +#247329 = CARTESIAN_POINT('',(197.411639,-46.945287,1.585)); +#247330 = VECTOR('',#247331,1.); +#247331 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247332 = ORIENTED_EDGE('',*,*,#247333,.T.); +#247333 = EDGE_CURVE('',#247326,#247334,#247336,.T.); +#247334 = VERTEX_POINT('',#247335); +#247335 = CARTESIAN_POINT('',(197.656136,-47.317723,1.585)); +#247336 = LINE('',#247337,#247338); +#247337 = CARTESIAN_POINT('',(197.398122,-46.946618,1.585)); +#247338 = VECTOR('',#247339,1.); +#247339 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247340 = ORIENTED_EDGE('',*,*,#247341,.T.); +#247341 = EDGE_CURVE('',#247334,#247342,#247344,.T.); +#247342 = VERTEX_POINT('',#247343); +#247343 = CARTESIAN_POINT('',(197.526041,-47.390929,1.585)); +#247344 = CIRCLE('',#247345,7.500005951702E-02); +#247345 = AXIS2_PLACEMENT_3D('',#247346,#247347,#247348); +#247346 = CARTESIAN_POINT('',(197.58748306294,-47.34791874739,1.585)); +#247347 = DIRECTION('',(0.,0.,-1.)); +#247348 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247349 = ORIENTED_EDGE('',*,*,#247350,.T.); +#247350 = EDGE_CURVE('',#247342,#247351,#247353,.T.); +#247351 = VERTEX_POINT('',#247352); +#247352 = CARTESIAN_POINT('',(197.215101,-46.946728,1.585)); +#247353 = LINE('',#247354,#247355); +#247354 = CARTESIAN_POINT('',(197.526041,-47.390929,1.585)); +#247355 = VECTOR('',#247356,1.); +#247356 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247357 = ORIENTED_EDGE('',*,*,#247358,.T.); +#247358 = EDGE_CURVE('',#247351,#247359,#247361,.T.); +#247359 = VERTEX_POINT('',#247360); +#247360 = CARTESIAN_POINT('',(197.091055,-46.946728,1.585)); +#247361 = LINE('',#247362,#247363); +#247362 = CARTESIAN_POINT('',(197.215101,-46.946728,1.585)); +#247363 = VECTOR('',#247364,1.); +#247364 = DIRECTION('',(-1.,0.,0.)); +#247365 = ORIENTED_EDGE('',*,*,#247366,.T.); +#247366 = EDGE_CURVE('',#247359,#247367,#247369,.T.); +#247367 = VERTEX_POINT('',#247368); +#247368 = CARTESIAN_POINT('',(197.089614,-47.362551,1.585)); +#247369 = LINE('',#247370,#247371); +#247370 = CARTESIAN_POINT('',(197.091055,-46.946728,1.585)); +#247371 = VECTOR('',#247372,1.); +#247372 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247373 = ORIENTED_EDGE('',*,*,#247374,.T.); +#247374 = EDGE_CURVE('',#247367,#247375,#247377,.T.); +#247375 = VERTEX_POINT('',#247376); +#247376 = CARTESIAN_POINT('',(196.941055,-47.347919,1.585)); +#247377 = CIRCLE('',#247378,7.500006711464E-02); +#247378 = AXIS2_PLACEMENT_3D('',#247379,#247380,#247381); +#247379 = CARTESIAN_POINT('',(197.01605506711,-47.34791906711,1.585)); +#247380 = DIRECTION('',(-0.,0.,-1.)); +#247381 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247382 = ORIENTED_EDGE('',*,*,#247383,.T.); +#247383 = EDGE_CURVE('',#247375,#247281,#247384,.T.); +#247384 = LINE('',#247385,#247386); +#247385 = CARTESIAN_POINT('',(196.941055,-47.347919,1.585)); +#247386 = VECTOR('',#247387,1.); +#247387 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247388 = FACE_BOUND('',#247389,.F.); +#247389 = EDGE_LOOP('',(#247390,#247401,#247409,#247417,#247425,#247434) + ); +#247390 = ORIENTED_EDGE('',*,*,#247391,.T.); +#247391 = EDGE_CURVE('',#247392,#247394,#247396,.T.); +#247392 = VERTEX_POINT('',#247393); +#247393 = CARTESIAN_POINT('',(197.512483,-46.5561,1.585)); +#247394 = VERTEX_POINT('',#247395); +#247395 = CARTESIAN_POINT('',(197.379302,-46.422919,1.585)); +#247396 = CIRCLE('',#247397,0.18686440374); +#247397 = AXIS2_PLACEMENT_3D('',#247398,#247399,#247400); +#247398 = CARTESIAN_POINT('',(197.331766,-46.603636,1.585)); +#247399 = DIRECTION('',(0.,0.,1.)); +#247400 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247401 = ORIENTED_EDGE('',*,*,#247402,.T.); +#247402 = EDGE_CURVE('',#247394,#247403,#247405,.T.); +#247403 = VERTEX_POINT('',#247404); +#247404 = CARTESIAN_POINT('',(197.091055,-46.422919,1.585)); +#247405 = LINE('',#247406,#247407); +#247406 = CARTESIAN_POINT('',(197.379302,-46.422919,1.585)); +#247407 = VECTOR('',#247408,1.); +#247408 = DIRECTION('',(-1.,0.,0.)); +#247409 = ORIENTED_EDGE('',*,*,#247410,.T.); +#247410 = EDGE_CURVE('',#247403,#247411,#247413,.T.); +#247411 = VERTEX_POINT('',#247412); +#247412 = CARTESIAN_POINT('',(197.091055,-46.796728,1.585)); +#247413 = LINE('',#247414,#247415); +#247414 = CARTESIAN_POINT('',(197.091055,-46.422919,1.585)); +#247415 = VECTOR('',#247416,1.); +#247416 = DIRECTION('',(0.,-1.,0.)); +#247417 = ORIENTED_EDGE('',*,*,#247418,.T.); +#247418 = EDGE_CURVE('',#247411,#247419,#247421,.T.); +#247419 = VERTEX_POINT('',#247420); +#247420 = CARTESIAN_POINT('',(197.379302,-46.796728,1.585)); +#247421 = LINE('',#247422,#247423); +#247422 = CARTESIAN_POINT('',(197.091055,-46.796728,1.585)); +#247423 = VECTOR('',#247424,1.); +#247424 = DIRECTION('',(1.,0.,0.)); +#247425 = ORIENTED_EDGE('',*,*,#247426,.T.); +#247426 = EDGE_CURVE('',#247419,#247427,#247429,.T.); +#247427 = VERTEX_POINT('',#247428); +#247428 = CARTESIAN_POINT('',(197.512483,-46.663547,1.585)); +#247429 = CIRCLE('',#247430,0.18686440374); +#247430 = AXIS2_PLACEMENT_3D('',#247431,#247432,#247433); +#247431 = CARTESIAN_POINT('',(197.331766,-46.616011,1.585)); +#247432 = DIRECTION('',(0.,0.,1.)); +#247433 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247434 = ORIENTED_EDGE('',*,*,#247435,.T.); +#247435 = EDGE_CURVE('',#247427,#247392,#247436,.T.); +#247436 = LINE('',#247437,#247438); +#247437 = CARTESIAN_POINT('',(197.512483,-46.663547,1.585)); +#247438 = VECTOR('',#247439,1.); +#247439 = DIRECTION('',(0.,1.,0.)); +#247440 = PLANE('',#247441); +#247441 = AXIS2_PLACEMENT_3D('',#247442,#247443,#247444); +#247442 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247443 = DIRECTION('',(0.,0.,1.)); +#247444 = DIRECTION('',(1.,0.,-0.)); +#247445 = SHELL_BASED_SURFACE_MODEL('',(#247446)); +#247446 = OPEN_SHELL('',(#247447)); +#247447 = ADVANCED_FACE('',(#247448,#247559),#247611,.T.); +#247448 = FACE_BOUND('',#247449,.F.); +#247449 = EDGE_LOOP('',(#247450,#247461,#247469,#247478,#247486,#247495, + #247503,#247511,#247520,#247528,#247536,#247544,#247553)); +#247450 = ORIENTED_EDGE('',*,*,#247451,.T.); +#247451 = EDGE_CURVE('',#247452,#247454,#247456,.T.); +#247452 = VERTEX_POINT('',#247453); +#247453 = CARTESIAN_POINT('',(200.942496,-46.333287,1.585)); +#247454 = VERTEX_POINT('',#247455); +#247455 = CARTESIAN_POINT('',(201.016055,-46.272919,1.585)); +#247456 = CIRCLE('',#247457,7.500074938986E-02); +#247457 = AXIS2_PLACEMENT_3D('',#247458,#247459,#247460); +#247458 = CARTESIAN_POINT('',(201.01605546611,-46.34791974938,1.585)); +#247459 = DIRECTION('',(0.,0.,-1.)); +#247460 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247461 = ORIENTED_EDGE('',*,*,#247462,.T.); +#247462 = EDGE_CURVE('',#247454,#247463,#247465,.T.); +#247463 = VERTEX_POINT('',#247464); +#247464 = CARTESIAN_POINT('',(201.411639,-46.27436,1.585)); +#247465 = LINE('',#247466,#247467); +#247466 = CARTESIAN_POINT('',(201.016055,-46.272919,1.585)); +#247467 = VECTOR('',#247468,1.); +#247468 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247469 = ORIENTED_EDGE('',*,*,#247470,.T.); +#247470 = EDGE_CURVE('',#247463,#247471,#247473,.T.); +#247471 = VERTEX_POINT('',#247472); +#247472 = CARTESIAN_POINT('',(201.661042,-46.523763,1.585)); +#247473 = CIRCLE('',#247474,0.347870264855); +#247474 = AXIS2_PLACEMENT_3D('',#247475,#247476,#247477); +#247475 = CARTESIAN_POINT('',(201.32431126502,-46.61109073497,1.585)); +#247476 = DIRECTION('',(0.,0.,-1.)); +#247477 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247478 = ORIENTED_EDGE('',*,*,#247479,.T.); +#247479 = EDGE_CURVE('',#247471,#247480,#247482,.T.); +#247480 = VERTEX_POINT('',#247481); +#247481 = CARTESIAN_POINT('',(201.65982,-46.701062,1.585)); +#247482 = LINE('',#247483,#247484); +#247483 = CARTESIAN_POINT('',(201.661042,-46.523763,1.585)); +#247484 = VECTOR('',#247485,1.); +#247485 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247486 = ORIENTED_EDGE('',*,*,#247487,.T.); +#247487 = EDGE_CURVE('',#247480,#247488,#247490,.T.); +#247488 = VERTEX_POINT('',#247489); +#247489 = CARTESIAN_POINT('',(201.411639,-46.945287,1.585)); +#247490 = CIRCLE('',#247491,0.348632345849); +#247491 = AXIS2_PLACEMENT_3D('',#247492,#247493,#247494); +#247492 = CARTESIAN_POINT('',(201.32387019403,-46.6078834593,1.585)); +#247493 = DIRECTION('',(0.,0.,-1.)); +#247494 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247495 = ORIENTED_EDGE('',*,*,#247496,.T.); +#247496 = EDGE_CURVE('',#247488,#247497,#247499,.T.); +#247497 = VERTEX_POINT('',#247498); +#247498 = CARTESIAN_POINT('',(201.398122,-46.946618,1.585)); +#247499 = LINE('',#247500,#247501); +#247500 = CARTESIAN_POINT('',(201.411639,-46.945287,1.585)); +#247501 = VECTOR('',#247502,1.); +#247502 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247503 = ORIENTED_EDGE('',*,*,#247504,.T.); +#247504 = EDGE_CURVE('',#247497,#247505,#247507,.T.); +#247505 = VERTEX_POINT('',#247506); +#247506 = CARTESIAN_POINT('',(201.656136,-47.317723,1.585)); +#247507 = LINE('',#247508,#247509); +#247508 = CARTESIAN_POINT('',(201.398122,-46.946618,1.585)); +#247509 = VECTOR('',#247510,1.); +#247510 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247511 = ORIENTED_EDGE('',*,*,#247512,.T.); +#247512 = EDGE_CURVE('',#247505,#247513,#247515,.T.); +#247513 = VERTEX_POINT('',#247514); +#247514 = CARTESIAN_POINT('',(201.526041,-47.390929,1.585)); +#247515 = CIRCLE('',#247516,7.500005951702E-02); +#247516 = AXIS2_PLACEMENT_3D('',#247517,#247518,#247519); +#247517 = CARTESIAN_POINT('',(201.58748306294,-47.34791874739,1.585)); +#247518 = DIRECTION('',(0.,0.,-1.)); +#247519 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247520 = ORIENTED_EDGE('',*,*,#247521,.T.); +#247521 = EDGE_CURVE('',#247513,#247522,#247524,.T.); +#247522 = VERTEX_POINT('',#247523); +#247523 = CARTESIAN_POINT('',(201.215101,-46.946728,1.585)); +#247524 = LINE('',#247525,#247526); +#247525 = CARTESIAN_POINT('',(201.526041,-47.390929,1.585)); +#247526 = VECTOR('',#247527,1.); +#247527 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247528 = ORIENTED_EDGE('',*,*,#247529,.T.); +#247529 = EDGE_CURVE('',#247522,#247530,#247532,.T.); +#247530 = VERTEX_POINT('',#247531); +#247531 = CARTESIAN_POINT('',(201.091055,-46.946728,1.585)); +#247532 = LINE('',#247533,#247534); +#247533 = CARTESIAN_POINT('',(201.215101,-46.946728,1.585)); +#247534 = VECTOR('',#247535,1.); +#247535 = DIRECTION('',(-1.,0.,0.)); +#247536 = ORIENTED_EDGE('',*,*,#247537,.T.); +#247537 = EDGE_CURVE('',#247530,#247538,#247540,.T.); +#247538 = VERTEX_POINT('',#247539); +#247539 = CARTESIAN_POINT('',(201.089614,-47.362551,1.585)); +#247540 = LINE('',#247541,#247542); +#247541 = CARTESIAN_POINT('',(201.091055,-46.946728,1.585)); +#247542 = VECTOR('',#247543,1.); +#247543 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247544 = ORIENTED_EDGE('',*,*,#247545,.T.); +#247545 = EDGE_CURVE('',#247538,#247546,#247548,.T.); +#247546 = VERTEX_POINT('',#247547); +#247547 = CARTESIAN_POINT('',(200.941055,-47.347919,1.585)); +#247548 = CIRCLE('',#247549,7.500006711464E-02); +#247549 = AXIS2_PLACEMENT_3D('',#247550,#247551,#247552); +#247550 = CARTESIAN_POINT('',(201.01605506711,-47.34791906711,1.585)); +#247551 = DIRECTION('',(-0.,0.,-1.)); +#247552 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247553 = ORIENTED_EDGE('',*,*,#247554,.T.); +#247554 = EDGE_CURVE('',#247546,#247452,#247555,.T.); +#247555 = LINE('',#247556,#247557); +#247556 = CARTESIAN_POINT('',(200.941055,-47.347919,1.585)); +#247557 = VECTOR('',#247558,1.); +#247558 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247559 = FACE_BOUND('',#247560,.F.); +#247560 = EDGE_LOOP('',(#247561,#247572,#247580,#247588,#247596,#247605) + ); +#247561 = ORIENTED_EDGE('',*,*,#247562,.T.); +#247562 = EDGE_CURVE('',#247563,#247565,#247567,.T.); +#247563 = VERTEX_POINT('',#247564); +#247564 = CARTESIAN_POINT('',(201.512483,-46.5561,1.585)); +#247565 = VERTEX_POINT('',#247566); +#247566 = CARTESIAN_POINT('',(201.379302,-46.422919,1.585)); +#247567 = CIRCLE('',#247568,0.18686440374); +#247568 = AXIS2_PLACEMENT_3D('',#247569,#247570,#247571); +#247569 = CARTESIAN_POINT('',(201.331766,-46.603636,1.585)); +#247570 = DIRECTION('',(0.,0.,1.)); +#247571 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247572 = ORIENTED_EDGE('',*,*,#247573,.T.); +#247573 = EDGE_CURVE('',#247565,#247574,#247576,.T.); +#247574 = VERTEX_POINT('',#247575); +#247575 = CARTESIAN_POINT('',(201.091055,-46.422919,1.585)); +#247576 = LINE('',#247577,#247578); +#247577 = CARTESIAN_POINT('',(201.379302,-46.422919,1.585)); +#247578 = VECTOR('',#247579,1.); +#247579 = DIRECTION('',(-1.,0.,0.)); +#247580 = ORIENTED_EDGE('',*,*,#247581,.T.); +#247581 = EDGE_CURVE('',#247574,#247582,#247584,.T.); +#247582 = VERTEX_POINT('',#247583); +#247583 = CARTESIAN_POINT('',(201.091055,-46.796728,1.585)); +#247584 = LINE('',#247585,#247586); +#247585 = CARTESIAN_POINT('',(201.091055,-46.422919,1.585)); +#247586 = VECTOR('',#247587,1.); +#247587 = DIRECTION('',(0.,-1.,0.)); +#247588 = ORIENTED_EDGE('',*,*,#247589,.T.); +#247589 = EDGE_CURVE('',#247582,#247590,#247592,.T.); +#247590 = VERTEX_POINT('',#247591); +#247591 = CARTESIAN_POINT('',(201.379302,-46.796728,1.585)); +#247592 = LINE('',#247593,#247594); +#247593 = CARTESIAN_POINT('',(201.091055,-46.796728,1.585)); +#247594 = VECTOR('',#247595,1.); +#247595 = DIRECTION('',(1.,0.,0.)); +#247596 = ORIENTED_EDGE('',*,*,#247597,.T.); +#247597 = EDGE_CURVE('',#247590,#247598,#247600,.T.); +#247598 = VERTEX_POINT('',#247599); +#247599 = CARTESIAN_POINT('',(201.512483,-46.663547,1.585)); +#247600 = CIRCLE('',#247601,0.18686440374); +#247601 = AXIS2_PLACEMENT_3D('',#247602,#247603,#247604); +#247602 = CARTESIAN_POINT('',(201.331766,-46.616011,1.585)); +#247603 = DIRECTION('',(0.,0.,1.)); +#247604 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247605 = ORIENTED_EDGE('',*,*,#247606,.T.); +#247606 = EDGE_CURVE('',#247598,#247563,#247607,.T.); +#247607 = LINE('',#247608,#247609); +#247608 = CARTESIAN_POINT('',(201.512483,-46.663547,1.585)); +#247609 = VECTOR('',#247610,1.); +#247610 = DIRECTION('',(0.,1.,0.)); +#247611 = PLANE('',#247612); +#247612 = AXIS2_PLACEMENT_3D('',#247613,#247614,#247615); +#247613 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247614 = DIRECTION('',(0.,0.,1.)); +#247615 = DIRECTION('',(1.,0.,-0.)); +#247616 = SHELL_BASED_SURFACE_MODEL('',(#247617)); +#247617 = OPEN_SHELL('',(#247618)); +#247618 = ADVANCED_FACE('',(#247619,#247730),#247782,.T.); +#247619 = FACE_BOUND('',#247620,.F.); +#247620 = EDGE_LOOP('',(#247621,#247632,#247640,#247649,#247657,#247666, + #247674,#247682,#247691,#247699,#247707,#247715,#247724)); +#247621 = ORIENTED_EDGE('',*,*,#247622,.T.); +#247622 = EDGE_CURVE('',#247623,#247625,#247627,.T.); +#247623 = VERTEX_POINT('',#247624); +#247624 = CARTESIAN_POINT('',(204.942496,-46.333287,1.585)); +#247625 = VERTEX_POINT('',#247626); +#247626 = CARTESIAN_POINT('',(205.016055,-46.272919,1.585)); +#247627 = CIRCLE('',#247628,7.500074938986E-02); +#247628 = AXIS2_PLACEMENT_3D('',#247629,#247630,#247631); +#247629 = CARTESIAN_POINT('',(205.01605546611,-46.34791974938,1.585)); +#247630 = DIRECTION('',(0.,0.,-1.)); +#247631 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247632 = ORIENTED_EDGE('',*,*,#247633,.T.); +#247633 = EDGE_CURVE('',#247625,#247634,#247636,.T.); +#247634 = VERTEX_POINT('',#247635); +#247635 = CARTESIAN_POINT('',(205.411639,-46.27436,1.585)); +#247636 = LINE('',#247637,#247638); +#247637 = CARTESIAN_POINT('',(205.016055,-46.272919,1.585)); +#247638 = VECTOR('',#247639,1.); +#247639 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247640 = ORIENTED_EDGE('',*,*,#247641,.T.); +#247641 = EDGE_CURVE('',#247634,#247642,#247644,.T.); +#247642 = VERTEX_POINT('',#247643); +#247643 = CARTESIAN_POINT('',(205.661042,-46.523763,1.585)); +#247644 = CIRCLE('',#247645,0.347870264855); +#247645 = AXIS2_PLACEMENT_3D('',#247646,#247647,#247648); +#247646 = CARTESIAN_POINT('',(205.32431126502,-46.61109073497,1.585)); +#247647 = DIRECTION('',(0.,0.,-1.)); +#247648 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247649 = ORIENTED_EDGE('',*,*,#247650,.T.); +#247650 = EDGE_CURVE('',#247642,#247651,#247653,.T.); +#247651 = VERTEX_POINT('',#247652); +#247652 = CARTESIAN_POINT('',(205.65982,-46.701062,1.585)); +#247653 = LINE('',#247654,#247655); +#247654 = CARTESIAN_POINT('',(205.661042,-46.523763,1.585)); +#247655 = VECTOR('',#247656,1.); +#247656 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247657 = ORIENTED_EDGE('',*,*,#247658,.T.); +#247658 = EDGE_CURVE('',#247651,#247659,#247661,.T.); +#247659 = VERTEX_POINT('',#247660); +#247660 = CARTESIAN_POINT('',(205.411639,-46.945287,1.585)); +#247661 = CIRCLE('',#247662,0.348632345849); +#247662 = AXIS2_PLACEMENT_3D('',#247663,#247664,#247665); +#247663 = CARTESIAN_POINT('',(205.32387019403,-46.6078834593,1.585)); +#247664 = DIRECTION('',(0.,0.,-1.)); +#247665 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247666 = ORIENTED_EDGE('',*,*,#247667,.T.); +#247667 = EDGE_CURVE('',#247659,#247668,#247670,.T.); +#247668 = VERTEX_POINT('',#247669); +#247669 = CARTESIAN_POINT('',(205.398122,-46.946618,1.585)); +#247670 = LINE('',#247671,#247672); +#247671 = CARTESIAN_POINT('',(205.411639,-46.945287,1.585)); +#247672 = VECTOR('',#247673,1.); +#247673 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247674 = ORIENTED_EDGE('',*,*,#247675,.T.); +#247675 = EDGE_CURVE('',#247668,#247676,#247678,.T.); +#247676 = VERTEX_POINT('',#247677); +#247677 = CARTESIAN_POINT('',(205.656136,-47.317723,1.585)); +#247678 = LINE('',#247679,#247680); +#247679 = CARTESIAN_POINT('',(205.398122,-46.946618,1.585)); +#247680 = VECTOR('',#247681,1.); +#247681 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247682 = ORIENTED_EDGE('',*,*,#247683,.T.); +#247683 = EDGE_CURVE('',#247676,#247684,#247686,.T.); +#247684 = VERTEX_POINT('',#247685); +#247685 = CARTESIAN_POINT('',(205.526041,-47.390929,1.585)); +#247686 = CIRCLE('',#247687,7.500005951702E-02); +#247687 = AXIS2_PLACEMENT_3D('',#247688,#247689,#247690); +#247688 = CARTESIAN_POINT('',(205.58748306294,-47.34791874739,1.585)); +#247689 = DIRECTION('',(0.,0.,-1.)); +#247690 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247691 = ORIENTED_EDGE('',*,*,#247692,.T.); +#247692 = EDGE_CURVE('',#247684,#247693,#247695,.T.); +#247693 = VERTEX_POINT('',#247694); +#247694 = CARTESIAN_POINT('',(205.215101,-46.946728,1.585)); +#247695 = LINE('',#247696,#247697); +#247696 = CARTESIAN_POINT('',(205.526041,-47.390929,1.585)); +#247697 = VECTOR('',#247698,1.); +#247698 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247699 = ORIENTED_EDGE('',*,*,#247700,.T.); +#247700 = EDGE_CURVE('',#247693,#247701,#247703,.T.); +#247701 = VERTEX_POINT('',#247702); +#247702 = CARTESIAN_POINT('',(205.091055,-46.946728,1.585)); +#247703 = LINE('',#247704,#247705); +#247704 = CARTESIAN_POINT('',(205.215101,-46.946728,1.585)); +#247705 = VECTOR('',#247706,1.); +#247706 = DIRECTION('',(-1.,0.,0.)); +#247707 = ORIENTED_EDGE('',*,*,#247708,.T.); +#247708 = EDGE_CURVE('',#247701,#247709,#247711,.T.); +#247709 = VERTEX_POINT('',#247710); +#247710 = CARTESIAN_POINT('',(205.089614,-47.362551,1.585)); +#247711 = LINE('',#247712,#247713); +#247712 = CARTESIAN_POINT('',(205.091055,-46.946728,1.585)); +#247713 = VECTOR('',#247714,1.); +#247714 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247715 = ORIENTED_EDGE('',*,*,#247716,.T.); +#247716 = EDGE_CURVE('',#247709,#247717,#247719,.T.); +#247717 = VERTEX_POINT('',#247718); +#247718 = CARTESIAN_POINT('',(204.941055,-47.347919,1.585)); +#247719 = CIRCLE('',#247720,7.500006711464E-02); +#247720 = AXIS2_PLACEMENT_3D('',#247721,#247722,#247723); +#247721 = CARTESIAN_POINT('',(205.01605506711,-47.34791906711,1.585)); +#247722 = DIRECTION('',(-0.,0.,-1.)); +#247723 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247724 = ORIENTED_EDGE('',*,*,#247725,.T.); +#247725 = EDGE_CURVE('',#247717,#247623,#247726,.T.); +#247726 = LINE('',#247727,#247728); +#247727 = CARTESIAN_POINT('',(204.941055,-47.347919,1.585)); +#247728 = VECTOR('',#247729,1.); +#247729 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247730 = FACE_BOUND('',#247731,.F.); +#247731 = EDGE_LOOP('',(#247732,#247743,#247751,#247759,#247767,#247776) + ); +#247732 = ORIENTED_EDGE('',*,*,#247733,.T.); +#247733 = EDGE_CURVE('',#247734,#247736,#247738,.T.); +#247734 = VERTEX_POINT('',#247735); +#247735 = CARTESIAN_POINT('',(205.512483,-46.5561,1.585)); +#247736 = VERTEX_POINT('',#247737); +#247737 = CARTESIAN_POINT('',(205.379302,-46.422919,1.585)); +#247738 = CIRCLE('',#247739,0.18686440374); +#247739 = AXIS2_PLACEMENT_3D('',#247740,#247741,#247742); +#247740 = CARTESIAN_POINT('',(205.331766,-46.603636,1.585)); +#247741 = DIRECTION('',(0.,0.,1.)); +#247742 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247743 = ORIENTED_EDGE('',*,*,#247744,.T.); +#247744 = EDGE_CURVE('',#247736,#247745,#247747,.T.); +#247745 = VERTEX_POINT('',#247746); +#247746 = CARTESIAN_POINT('',(205.091055,-46.422919,1.585)); +#247747 = LINE('',#247748,#247749); +#247748 = CARTESIAN_POINT('',(205.379302,-46.422919,1.585)); +#247749 = VECTOR('',#247750,1.); +#247750 = DIRECTION('',(-1.,0.,0.)); +#247751 = ORIENTED_EDGE('',*,*,#247752,.T.); +#247752 = EDGE_CURVE('',#247745,#247753,#247755,.T.); +#247753 = VERTEX_POINT('',#247754); +#247754 = CARTESIAN_POINT('',(205.091055,-46.796728,1.585)); +#247755 = LINE('',#247756,#247757); +#247756 = CARTESIAN_POINT('',(205.091055,-46.422919,1.585)); +#247757 = VECTOR('',#247758,1.); +#247758 = DIRECTION('',(0.,-1.,0.)); +#247759 = ORIENTED_EDGE('',*,*,#247760,.T.); +#247760 = EDGE_CURVE('',#247753,#247761,#247763,.T.); +#247761 = VERTEX_POINT('',#247762); +#247762 = CARTESIAN_POINT('',(205.379302,-46.796728,1.585)); +#247763 = LINE('',#247764,#247765); +#247764 = CARTESIAN_POINT('',(205.091055,-46.796728,1.585)); +#247765 = VECTOR('',#247766,1.); +#247766 = DIRECTION('',(1.,0.,0.)); +#247767 = ORIENTED_EDGE('',*,*,#247768,.T.); +#247768 = EDGE_CURVE('',#247761,#247769,#247771,.T.); +#247769 = VERTEX_POINT('',#247770); +#247770 = CARTESIAN_POINT('',(205.512483,-46.663547,1.585)); +#247771 = CIRCLE('',#247772,0.18686440374); +#247772 = AXIS2_PLACEMENT_3D('',#247773,#247774,#247775); +#247773 = CARTESIAN_POINT('',(205.331766,-46.616011,1.585)); +#247774 = DIRECTION('',(0.,0.,1.)); +#247775 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247776 = ORIENTED_EDGE('',*,*,#247777,.T.); +#247777 = EDGE_CURVE('',#247769,#247734,#247778,.T.); +#247778 = LINE('',#247779,#247780); +#247779 = CARTESIAN_POINT('',(205.512483,-46.663547,1.585)); +#247780 = VECTOR('',#247781,1.); +#247781 = DIRECTION('',(0.,1.,0.)); +#247782 = PLANE('',#247783); +#247783 = AXIS2_PLACEMENT_3D('',#247784,#247785,#247786); +#247784 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247785 = DIRECTION('',(0.,0.,1.)); +#247786 = DIRECTION('',(1.,0.,-0.)); +#247787 = SHELL_BASED_SURFACE_MODEL('',(#247788)); +#247788 = OPEN_SHELL('',(#247789)); +#247789 = ADVANCED_FACE('',(#247790,#247908,#247975),#248027,.T.); +#247790 = FACE_BOUND('',#247791,.F.); +#247791 = EDGE_LOOP('',(#247792,#247803,#247811,#247820,#247828,#247836, + #247844,#247852,#247860,#247869,#247877,#247886,#247894,#247902)); +#247792 = ORIENTED_EDGE('',*,*,#247793,.T.); +#247793 = EDGE_CURVE('',#247794,#247796,#247798,.T.); +#247794 = VERTEX_POINT('',#247795); +#247795 = CARTESIAN_POINT('',(193.942496,-46.333287,1.585)); +#247796 = VERTEX_POINT('',#247797); +#247797 = CARTESIAN_POINT('',(194.016055,-46.272919,1.585)); +#247798 = CIRCLE('',#247799,7.500074938986E-02); +#247799 = AXIS2_PLACEMENT_3D('',#247800,#247801,#247802); +#247800 = CARTESIAN_POINT('',(194.01605546611,-46.34791974938,1.585)); +#247801 = DIRECTION('',(0.,0.,-1.)); +#247802 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247803 = ORIENTED_EDGE('',*,*,#247804,.T.); +#247804 = EDGE_CURVE('',#247796,#247805,#247807,.T.); +#247805 = VERTEX_POINT('',#247806); +#247806 = CARTESIAN_POINT('',(194.36402,-46.27436,1.585)); +#247807 = LINE('',#247808,#247809); +#247808 = CARTESIAN_POINT('',(194.016055,-46.272919,1.585)); +#247809 = VECTOR('',#247810,1.); +#247810 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#247811 = ORIENTED_EDGE('',*,*,#247812,.T.); +#247812 = EDGE_CURVE('',#247805,#247813,#247815,.T.); +#247813 = VERTEX_POINT('',#247814); +#247814 = CARTESIAN_POINT('',(194.613423,-46.523763,1.585)); +#247815 = CIRCLE('',#247816,0.347870264855); +#247816 = AXIS2_PLACEMENT_3D('',#247817,#247818,#247819); +#247817 = CARTESIAN_POINT('',(194.27669226502,-46.61109073497,1.585)); +#247818 = DIRECTION('',(0.,0.,-1.)); +#247819 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247820 = ORIENTED_EDGE('',*,*,#247821,.T.); +#247821 = EDGE_CURVE('',#247813,#247822,#247824,.T.); +#247822 = VERTEX_POINT('',#247823); +#247823 = CARTESIAN_POINT('',(194.612201,-46.653443,1.585)); +#247824 = LINE('',#247825,#247826); +#247825 = CARTESIAN_POINT('',(194.613423,-46.523763,1.585)); +#247826 = VECTOR('',#247827,1.); +#247827 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#247828 = ORIENTED_EDGE('',*,*,#247829,.T.); +#247829 = EDGE_CURVE('',#247822,#247830,#247832,.T.); +#247830 = VERTEX_POINT('',#247831); +#247831 = CARTESIAN_POINT('',(194.549996,-46.776154,1.585)); +#247832 = LINE('',#247833,#247834); +#247833 = CARTESIAN_POINT('',(194.612201,-46.653443,1.585)); +#247834 = VECTOR('',#247835,1.); +#247835 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#247836 = ORIENTED_EDGE('',*,*,#247837,.T.); +#247837 = EDGE_CURVE('',#247830,#247838,#247840,.T.); +#247838 = VERTEX_POINT('',#247839); +#247839 = CARTESIAN_POINT('',(194.523319,-46.803862,1.585)); +#247840 = LINE('',#247841,#247842); +#247841 = CARTESIAN_POINT('',(194.549996,-46.776154,1.585)); +#247842 = VECTOR('',#247843,1.); +#247843 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#247844 = ORIENTED_EDGE('',*,*,#247845,.T.); +#247845 = EDGE_CURVE('',#247838,#247846,#247848,.T.); +#247846 = VERTEX_POINT('',#247847); +#247847 = CARTESIAN_POINT('',(194.545278,-46.818695,1.585)); +#247848 = LINE('',#247849,#247850); +#247849 = CARTESIAN_POINT('',(194.523319,-46.803862,1.585)); +#247850 = VECTOR('',#247851,1.); +#247851 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#247852 = ORIENTED_EDGE('',*,*,#247853,.T.); +#247853 = EDGE_CURVE('',#247846,#247854,#247856,.T.); +#247854 = VERTEX_POINT('',#247855); +#247855 = CARTESIAN_POINT('',(194.606946,-46.885806,1.585)); +#247856 = LINE('',#247857,#247858); +#247857 = CARTESIAN_POINT('',(194.545278,-46.818695,1.585)); +#247858 = VECTOR('',#247859,1.); +#247859 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#247860 = ORIENTED_EDGE('',*,*,#247861,.T.); +#247861 = EDGE_CURVE('',#247854,#247862,#247864,.T.); +#247862 = VERTEX_POINT('',#247863); +#247863 = CARTESIAN_POINT('',(194.597615,-47.299963,1.585)); +#247864 = CIRCLE('',#247865,0.341850333486); +#247865 = AXIS2_PLACEMENT_3D('',#247866,#247867,#247868); +#247866 = CARTESIAN_POINT('',(194.33039659864,-47.08675892761,1.585)); +#247867 = DIRECTION('',(0.,0.,-1.)); +#247868 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#247869 = ORIENTED_EDGE('',*,*,#247870,.T.); +#247870 = EDGE_CURVE('',#247862,#247871,#247873,.T.); +#247871 = VERTEX_POINT('',#247872); +#247872 = CARTESIAN_POINT('',(194.532085,-47.363417,1.585)); +#247873 = LINE('',#247874,#247875); +#247874 = CARTESIAN_POINT('',(194.597615,-47.299963,1.585)); +#247875 = VECTOR('',#247876,1.); +#247876 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#247877 = ORIENTED_EDGE('',*,*,#247878,.T.); +#247878 = EDGE_CURVE('',#247871,#247879,#247881,.T.); +#247879 = VERTEX_POINT('',#247880); +#247880 = CARTESIAN_POINT('',(193.974387,-47.410279,1.585)); +#247881 = CIRCLE('',#247882,0.612118292739); +#247882 = AXIS2_PLACEMENT_3D('',#247883,#247884,#247885); +#247883 = CARTESIAN_POINT('',(194.20765114383,-46.84434910725,1.585)); +#247884 = DIRECTION('',(-0.,0.,-1.)); +#247885 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#247886 = ORIENTED_EDGE('',*,*,#247887,.T.); +#247887 = EDGE_CURVE('',#247879,#247888,#247890,.T.); +#247888 = VERTEX_POINT('',#247889); +#247889 = CARTESIAN_POINT('',(193.953695,-47.389587,1.585)); +#247890 = LINE('',#247891,#247892); +#247891 = CARTESIAN_POINT('',(193.974387,-47.410279,1.585)); +#247892 = VECTOR('',#247893,1.); +#247893 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#247894 = ORIENTED_EDGE('',*,*,#247895,.T.); +#247895 = EDGE_CURVE('',#247888,#247896,#247898,.T.); +#247896 = VERTEX_POINT('',#247897); +#247897 = CARTESIAN_POINT('',(193.941055,-47.347919,1.585)); +#247898 = LINE('',#247899,#247900); +#247899 = CARTESIAN_POINT('',(193.953695,-47.389587,1.585)); +#247900 = VECTOR('',#247901,1.); +#247901 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#247902 = ORIENTED_EDGE('',*,*,#247903,.T.); +#247903 = EDGE_CURVE('',#247896,#247794,#247904,.T.); +#247904 = LINE('',#247905,#247906); +#247905 = CARTESIAN_POINT('',(193.941055,-47.347919,1.585)); +#247906 = VECTOR('',#247907,1.); +#247907 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247908 = FACE_BOUND('',#247909,.F.); +#247909 = EDGE_LOOP('',(#247910,#247920,#247928,#247936,#247944,#247953, + #247961,#247969)); +#247910 = ORIENTED_EDGE('',*,*,#247911,.T.); +#247911 = EDGE_CURVE('',#247912,#247914,#247916,.T.); +#247912 = VERTEX_POINT('',#247913); +#247913 = CARTESIAN_POINT('',(194.451731,-46.93728,1.585)); +#247914 = VERTEX_POINT('',#247915); +#247915 = CARTESIAN_POINT('',(194.337218,-46.899109,1.585)); +#247916 = LINE('',#247917,#247918); +#247917 = CARTESIAN_POINT('',(194.451731,-46.93728,1.585)); +#247918 = VECTOR('',#247919,1.); +#247919 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#247920 = ORIENTED_EDGE('',*,*,#247921,.T.); +#247921 = EDGE_CURVE('',#247914,#247922,#247924,.T.); +#247922 = VERTEX_POINT('',#247923); +#247923 = CARTESIAN_POINT('',(194.091055,-46.899109,1.585)); +#247924 = LINE('',#247925,#247926); +#247925 = CARTESIAN_POINT('',(194.337218,-46.899109,1.585)); +#247926 = VECTOR('',#247927,1.); +#247927 = DIRECTION('',(-1.,0.,0.)); +#247928 = ORIENTED_EDGE('',*,*,#247929,.T.); +#247929 = EDGE_CURVE('',#247922,#247930,#247932,.T.); +#247930 = VERTEX_POINT('',#247931); +#247931 = CARTESIAN_POINT('',(194.091055,-47.272919,1.585)); +#247932 = LINE('',#247933,#247934); +#247933 = CARTESIAN_POINT('',(194.091055,-46.899109,1.585)); +#247934 = VECTOR('',#247935,1.); +#247935 = DIRECTION('',(0.,-1.,0.)); +#247936 = ORIENTED_EDGE('',*,*,#247937,.T.); +#247937 = EDGE_CURVE('',#247930,#247938,#247940,.T.); +#247938 = VERTEX_POINT('',#247939); +#247939 = CARTESIAN_POINT('',(194.379302,-47.272919,1.585)); +#247940 = LINE('',#247941,#247942); +#247941 = CARTESIAN_POINT('',(194.091055,-47.272919,1.585)); +#247942 = VECTOR('',#247943,1.); +#247943 = DIRECTION('',(1.,0.,0.)); +#247944 = ORIENTED_EDGE('',*,*,#247945,.T.); +#247945 = EDGE_CURVE('',#247938,#247946,#247948,.T.); +#247946 = VERTEX_POINT('',#247947); +#247947 = CARTESIAN_POINT('',(194.512483,-47.139737,1.585)); +#247948 = CIRCLE('',#247949,0.186867760544); +#247949 = AXIS2_PLACEMENT_3D('',#247950,#247951,#247952); +#247950 = CARTESIAN_POINT('',(194.33176296928,-47.09219932622,1.585)); +#247951 = DIRECTION('',(0.,0.,1.)); +#247952 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#247953 = ORIENTED_EDGE('',*,*,#247954,.T.); +#247954 = EDGE_CURVE('',#247946,#247955,#247957,.T.); +#247955 = VERTEX_POINT('',#247956); +#247956 = CARTESIAN_POINT('',(194.512483,-47.03229,1.585)); +#247957 = LINE('',#247958,#247959); +#247958 = CARTESIAN_POINT('',(194.512483,-47.139737,1.585)); +#247959 = VECTOR('',#247960,1.); +#247960 = DIRECTION('',(0.,1.,0.)); +#247961 = ORIENTED_EDGE('',*,*,#247962,.T.); +#247962 = EDGE_CURVE('',#247955,#247963,#247965,.T.); +#247963 = VERTEX_POINT('',#247964); +#247964 = CARTESIAN_POINT('',(194.478225,-46.963774,1.585)); +#247965 = LINE('',#247966,#247967); +#247966 = CARTESIAN_POINT('',(194.512483,-47.03229,1.585)); +#247967 = VECTOR('',#247968,1.); +#247968 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#247969 = ORIENTED_EDGE('',*,*,#247970,.T.); +#247970 = EDGE_CURVE('',#247963,#247912,#247971,.T.); +#247971 = LINE('',#247972,#247973); +#247972 = CARTESIAN_POINT('',(194.478225,-46.963774,1.585)); +#247973 = VECTOR('',#247974,1.); +#247974 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#247975 = FACE_BOUND('',#247976,.F.); +#247976 = EDGE_LOOP('',(#247977,#247988,#247996,#248004,#248012,#248021) + ); +#247977 = ORIENTED_EDGE('',*,*,#247978,.T.); +#247978 = EDGE_CURVE('',#247979,#247981,#247983,.T.); +#247979 = VERTEX_POINT('',#247980); +#247980 = CARTESIAN_POINT('',(194.464864,-46.5561,1.585)); +#247981 = VERTEX_POINT('',#247982); +#247982 = CARTESIAN_POINT('',(194.331683,-46.422919,1.585)); +#247983 = CIRCLE('',#247984,0.18686440374); +#247984 = AXIS2_PLACEMENT_3D('',#247985,#247986,#247987); +#247985 = CARTESIAN_POINT('',(194.284147,-46.603636,1.585)); +#247986 = DIRECTION('',(0.,0.,1.)); +#247987 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247988 = ORIENTED_EDGE('',*,*,#247989,.T.); +#247989 = EDGE_CURVE('',#247981,#247990,#247992,.T.); +#247990 = VERTEX_POINT('',#247991); +#247991 = CARTESIAN_POINT('',(194.091055,-46.422919,1.585)); +#247992 = LINE('',#247993,#247994); +#247993 = CARTESIAN_POINT('',(194.331683,-46.422919,1.585)); +#247994 = VECTOR('',#247995,1.); +#247995 = DIRECTION('',(-1.,0.,0.)); +#247996 = ORIENTED_EDGE('',*,*,#247997,.T.); +#247997 = EDGE_CURVE('',#247990,#247998,#248000,.T.); +#247998 = VERTEX_POINT('',#247999); +#247999 = CARTESIAN_POINT('',(194.091055,-46.749109,1.585)); +#248000 = LINE('',#248001,#248002); +#248001 = CARTESIAN_POINT('',(194.091055,-46.422919,1.585)); +#248002 = VECTOR('',#248003,1.); +#248003 = DIRECTION('',(0.,-1.,0.)); +#248004 = ORIENTED_EDGE('',*,*,#248005,.T.); +#248005 = EDGE_CURVE('',#247998,#248006,#248008,.T.); +#248006 = VERTEX_POINT('',#248007); +#248007 = CARTESIAN_POINT('',(194.331683,-46.749109,1.585)); +#248008 = LINE('',#248009,#248010); +#248009 = CARTESIAN_POINT('',(194.091055,-46.749109,1.585)); +#248010 = VECTOR('',#248011,1.); +#248011 = DIRECTION('',(1.,0.,0.)); +#248012 = ORIENTED_EDGE('',*,*,#248013,.T.); +#248013 = EDGE_CURVE('',#248006,#248014,#248016,.T.); +#248014 = VERTEX_POINT('',#248015); +#248015 = CARTESIAN_POINT('',(194.464864,-46.615928,1.585)); +#248016 = CIRCLE('',#248017,0.18686440374); +#248017 = AXIS2_PLACEMENT_3D('',#248018,#248019,#248020); +#248018 = CARTESIAN_POINT('',(194.284147,-46.568392,1.585)); +#248019 = DIRECTION('',(0.,0.,1.)); +#248020 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248021 = ORIENTED_EDGE('',*,*,#248022,.T.); +#248022 = EDGE_CURVE('',#248014,#247979,#248023,.T.); +#248023 = LINE('',#248024,#248025); +#248024 = CARTESIAN_POINT('',(194.464864,-46.615928,1.585)); +#248025 = VECTOR('',#248026,1.); +#248026 = DIRECTION('',(0.,1.,0.)); +#248027 = PLANE('',#248028); +#248028 = AXIS2_PLACEMENT_3D('',#248029,#248030,#248031); +#248029 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248030 = DIRECTION('',(0.,0.,1.)); +#248031 = DIRECTION('',(1.,0.,-0.)); +#248032 = SHELL_BASED_SURFACE_MODEL('',(#248033)); +#248033 = OPEN_SHELL('',(#248034)); +#248034 = ADVANCED_FACE('',(#248035,#248153,#248220),#248272,.T.); +#248035 = FACE_BOUND('',#248036,.F.); +#248036 = EDGE_LOOP('',(#248037,#248048,#248056,#248065,#248073,#248081, + #248089,#248097,#248105,#248114,#248122,#248131,#248139,#248147)); +#248037 = ORIENTED_EDGE('',*,*,#248038,.T.); +#248038 = EDGE_CURVE('',#248039,#248041,#248043,.T.); +#248039 = VERTEX_POINT('',#248040); +#248040 = CARTESIAN_POINT('',(197.942496,-46.333287,1.585)); +#248041 = VERTEX_POINT('',#248042); +#248042 = CARTESIAN_POINT('',(198.016055,-46.272919,1.585)); +#248043 = CIRCLE('',#248044,7.500074938986E-02); +#248044 = AXIS2_PLACEMENT_3D('',#248045,#248046,#248047); +#248045 = CARTESIAN_POINT('',(198.01605546611,-46.34791974938,1.585)); +#248046 = DIRECTION('',(0.,0.,-1.)); +#248047 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#248048 = ORIENTED_EDGE('',*,*,#248049,.T.); +#248049 = EDGE_CURVE('',#248041,#248050,#248052,.T.); +#248050 = VERTEX_POINT('',#248051); +#248051 = CARTESIAN_POINT('',(198.36402,-46.27436,1.585)); +#248052 = LINE('',#248053,#248054); +#248053 = CARTESIAN_POINT('',(198.016055,-46.272919,1.585)); +#248054 = VECTOR('',#248055,1.); +#248055 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#248056 = ORIENTED_EDGE('',*,*,#248057,.T.); +#248057 = EDGE_CURVE('',#248050,#248058,#248060,.T.); +#248058 = VERTEX_POINT('',#248059); +#248059 = CARTESIAN_POINT('',(198.613423,-46.523763,1.585)); +#248060 = CIRCLE('',#248061,0.347870264855); +#248061 = AXIS2_PLACEMENT_3D('',#248062,#248063,#248064); +#248062 = CARTESIAN_POINT('',(198.27669226502,-46.61109073497,1.585)); +#248063 = DIRECTION('',(0.,0.,-1.)); +#248064 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#248065 = ORIENTED_EDGE('',*,*,#248066,.T.); +#248066 = EDGE_CURVE('',#248058,#248067,#248069,.T.); +#248067 = VERTEX_POINT('',#248068); +#248068 = CARTESIAN_POINT('',(198.612201,-46.653443,1.585)); +#248069 = LINE('',#248070,#248071); +#248070 = CARTESIAN_POINT('',(198.613423,-46.523763,1.585)); +#248071 = VECTOR('',#248072,1.); +#248072 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#248073 = ORIENTED_EDGE('',*,*,#248074,.T.); +#248074 = EDGE_CURVE('',#248067,#248075,#248077,.T.); +#248075 = VERTEX_POINT('',#248076); +#248076 = CARTESIAN_POINT('',(198.549996,-46.776154,1.585)); +#248077 = LINE('',#248078,#248079); +#248078 = CARTESIAN_POINT('',(198.612201,-46.653443,1.585)); +#248079 = VECTOR('',#248080,1.); +#248080 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#248081 = ORIENTED_EDGE('',*,*,#248082,.T.); +#248082 = EDGE_CURVE('',#248075,#248083,#248085,.T.); +#248083 = VERTEX_POINT('',#248084); +#248084 = CARTESIAN_POINT('',(198.523319,-46.803862,1.585)); +#248085 = LINE('',#248086,#248087); +#248086 = CARTESIAN_POINT('',(198.549996,-46.776154,1.585)); +#248087 = VECTOR('',#248088,1.); +#248088 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#248089 = ORIENTED_EDGE('',*,*,#248090,.T.); +#248090 = EDGE_CURVE('',#248083,#248091,#248093,.T.); +#248091 = VERTEX_POINT('',#248092); +#248092 = CARTESIAN_POINT('',(198.545278,-46.818695,1.585)); +#248093 = LINE('',#248094,#248095); +#248094 = CARTESIAN_POINT('',(198.523319,-46.803862,1.585)); +#248095 = VECTOR('',#248096,1.); +#248096 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#248097 = ORIENTED_EDGE('',*,*,#248098,.T.); +#248098 = EDGE_CURVE('',#248091,#248099,#248101,.T.); +#248099 = VERTEX_POINT('',#248100); +#248100 = CARTESIAN_POINT('',(198.606946,-46.885806,1.585)); +#248101 = LINE('',#248102,#248103); +#248102 = CARTESIAN_POINT('',(198.545278,-46.818695,1.585)); +#248103 = VECTOR('',#248104,1.); +#248104 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#248105 = ORIENTED_EDGE('',*,*,#248106,.T.); +#248106 = EDGE_CURVE('',#248099,#248107,#248109,.T.); +#248107 = VERTEX_POINT('',#248108); +#248108 = CARTESIAN_POINT('',(198.597615,-47.299963,1.585)); +#248109 = CIRCLE('',#248110,0.341850333486); +#248110 = AXIS2_PLACEMENT_3D('',#248111,#248112,#248113); +#248111 = CARTESIAN_POINT('',(198.33039659864,-47.08675892761,1.585)); +#248112 = DIRECTION('',(0.,0.,-1.)); +#248113 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#248114 = ORIENTED_EDGE('',*,*,#248115,.T.); +#248115 = EDGE_CURVE('',#248107,#248116,#248118,.T.); +#248116 = VERTEX_POINT('',#248117); +#248117 = CARTESIAN_POINT('',(198.532085,-47.363417,1.585)); +#248118 = LINE('',#248119,#248120); +#248119 = CARTESIAN_POINT('',(198.597615,-47.299963,1.585)); +#248120 = VECTOR('',#248121,1.); +#248121 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#248122 = ORIENTED_EDGE('',*,*,#248123,.T.); +#248123 = EDGE_CURVE('',#248116,#248124,#248126,.T.); +#248124 = VERTEX_POINT('',#248125); +#248125 = CARTESIAN_POINT('',(197.974387,-47.410279,1.585)); +#248126 = CIRCLE('',#248127,0.612118292739); +#248127 = AXIS2_PLACEMENT_3D('',#248128,#248129,#248130); +#248128 = CARTESIAN_POINT('',(198.20765114383,-46.84434910725,1.585)); +#248129 = DIRECTION('',(-0.,0.,-1.)); +#248130 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#248131 = ORIENTED_EDGE('',*,*,#248132,.T.); +#248132 = EDGE_CURVE('',#248124,#248133,#248135,.T.); +#248133 = VERTEX_POINT('',#248134); +#248134 = CARTESIAN_POINT('',(197.953695,-47.389587,1.585)); +#248135 = LINE('',#248136,#248137); +#248136 = CARTESIAN_POINT('',(197.974387,-47.410279,1.585)); +#248137 = VECTOR('',#248138,1.); +#248138 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#248139 = ORIENTED_EDGE('',*,*,#248140,.T.); +#248140 = EDGE_CURVE('',#248133,#248141,#248143,.T.); +#248141 = VERTEX_POINT('',#248142); +#248142 = CARTESIAN_POINT('',(197.941055,-47.347919,1.585)); +#248143 = LINE('',#248144,#248145); +#248144 = CARTESIAN_POINT('',(197.953695,-47.389587,1.585)); +#248145 = VECTOR('',#248146,1.); +#248146 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#248147 = ORIENTED_EDGE('',*,*,#248148,.T.); +#248148 = EDGE_CURVE('',#248141,#248039,#248149,.T.); +#248149 = LINE('',#248150,#248151); +#248150 = CARTESIAN_POINT('',(197.941055,-47.347919,1.585)); +#248151 = VECTOR('',#248152,1.); +#248152 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#248153 = FACE_BOUND('',#248154,.F.); +#248154 = EDGE_LOOP('',(#248155,#248165,#248173,#248181,#248189,#248198, + #248206,#248214)); +#248155 = ORIENTED_EDGE('',*,*,#248156,.T.); +#248156 = EDGE_CURVE('',#248157,#248159,#248161,.T.); +#248157 = VERTEX_POINT('',#248158); +#248158 = CARTESIAN_POINT('',(198.451731,-46.93728,1.585)); +#248159 = VERTEX_POINT('',#248160); +#248160 = CARTESIAN_POINT('',(198.337218,-46.899109,1.585)); +#248161 = LINE('',#248162,#248163); +#248162 = CARTESIAN_POINT('',(198.451731,-46.93728,1.585)); +#248163 = VECTOR('',#248164,1.); +#248164 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#248165 = ORIENTED_EDGE('',*,*,#248166,.T.); +#248166 = EDGE_CURVE('',#248159,#248167,#248169,.T.); +#248167 = VERTEX_POINT('',#248168); +#248168 = CARTESIAN_POINT('',(198.091055,-46.899109,1.585)); +#248169 = LINE('',#248170,#248171); +#248170 = CARTESIAN_POINT('',(198.337218,-46.899109,1.585)); +#248171 = VECTOR('',#248172,1.); +#248172 = DIRECTION('',(-1.,0.,0.)); +#248173 = ORIENTED_EDGE('',*,*,#248174,.T.); +#248174 = EDGE_CURVE('',#248167,#248175,#248177,.T.); +#248175 = VERTEX_POINT('',#248176); +#248176 = CARTESIAN_POINT('',(198.091055,-47.272919,1.585)); +#248177 = LINE('',#248178,#248179); +#248178 = CARTESIAN_POINT('',(198.091055,-46.899109,1.585)); +#248179 = VECTOR('',#248180,1.); +#248180 = DIRECTION('',(0.,-1.,0.)); +#248181 = ORIENTED_EDGE('',*,*,#248182,.T.); +#248182 = EDGE_CURVE('',#248175,#248183,#248185,.T.); +#248183 = VERTEX_POINT('',#248184); +#248184 = CARTESIAN_POINT('',(198.379302,-47.272919,1.585)); +#248185 = LINE('',#248186,#248187); +#248186 = CARTESIAN_POINT('',(198.091055,-47.272919,1.585)); +#248187 = VECTOR('',#248188,1.); +#248188 = DIRECTION('',(1.,0.,0.)); +#248189 = ORIENTED_EDGE('',*,*,#248190,.T.); +#248190 = EDGE_CURVE('',#248183,#248191,#248193,.T.); +#248191 = VERTEX_POINT('',#248192); +#248192 = CARTESIAN_POINT('',(198.512483,-47.139737,1.585)); +#248193 = CIRCLE('',#248194,0.186867760544); +#248194 = AXIS2_PLACEMENT_3D('',#248195,#248196,#248197); +#248195 = CARTESIAN_POINT('',(198.33176296928,-47.09219932622,1.585)); +#248196 = DIRECTION('',(0.,0.,1.)); +#248197 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#248198 = ORIENTED_EDGE('',*,*,#248199,.T.); +#248199 = EDGE_CURVE('',#248191,#248200,#248202,.T.); +#248200 = VERTEX_POINT('',#248201); +#248201 = CARTESIAN_POINT('',(198.512483,-47.03229,1.585)); +#248202 = LINE('',#248203,#248204); +#248203 = CARTESIAN_POINT('',(198.512483,-47.139737,1.585)); +#248204 = VECTOR('',#248205,1.); +#248205 = DIRECTION('',(0.,1.,0.)); +#248206 = ORIENTED_EDGE('',*,*,#248207,.T.); +#248207 = EDGE_CURVE('',#248200,#248208,#248210,.T.); +#248208 = VERTEX_POINT('',#248209); +#248209 = CARTESIAN_POINT('',(198.478225,-46.963774,1.585)); +#248210 = LINE('',#248211,#248212); +#248211 = CARTESIAN_POINT('',(198.512483,-47.03229,1.585)); +#248212 = VECTOR('',#248213,1.); +#248213 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#248214 = ORIENTED_EDGE('',*,*,#248215,.T.); +#248215 = EDGE_CURVE('',#248208,#248157,#248216,.T.); +#248216 = LINE('',#248217,#248218); +#248217 = CARTESIAN_POINT('',(198.478225,-46.963774,1.585)); +#248218 = VECTOR('',#248219,1.); +#248219 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248220 = FACE_BOUND('',#248221,.F.); +#248221 = EDGE_LOOP('',(#248222,#248233,#248241,#248249,#248257,#248266) + ); +#248222 = ORIENTED_EDGE('',*,*,#248223,.T.); +#248223 = EDGE_CURVE('',#248224,#248226,#248228,.T.); +#248224 = VERTEX_POINT('',#248225); +#248225 = CARTESIAN_POINT('',(198.464864,-46.5561,1.585)); +#248226 = VERTEX_POINT('',#248227); +#248227 = CARTESIAN_POINT('',(198.331683,-46.422919,1.585)); +#248228 = CIRCLE('',#248229,0.18686440374); +#248229 = AXIS2_PLACEMENT_3D('',#248230,#248231,#248232); +#248230 = CARTESIAN_POINT('',(198.284147,-46.603636,1.585)); +#248231 = DIRECTION('',(0.,0.,1.)); +#248232 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#248233 = ORIENTED_EDGE('',*,*,#248234,.T.); +#248234 = EDGE_CURVE('',#248226,#248235,#248237,.T.); +#248235 = VERTEX_POINT('',#248236); +#248236 = CARTESIAN_POINT('',(198.091055,-46.422919,1.585)); +#248237 = LINE('',#248238,#248239); +#248238 = CARTESIAN_POINT('',(198.331683,-46.422919,1.585)); +#248239 = VECTOR('',#248240,1.); +#248240 = DIRECTION('',(-1.,0.,0.)); +#248241 = ORIENTED_EDGE('',*,*,#248242,.T.); +#248242 = EDGE_CURVE('',#248235,#248243,#248245,.T.); +#248243 = VERTEX_POINT('',#248244); +#248244 = CARTESIAN_POINT('',(198.091055,-46.749109,1.585)); +#248245 = LINE('',#248246,#248247); +#248246 = CARTESIAN_POINT('',(198.091055,-46.422919,1.585)); +#248247 = VECTOR('',#248248,1.); +#248248 = DIRECTION('',(0.,-1.,0.)); +#248249 = ORIENTED_EDGE('',*,*,#248250,.T.); +#248250 = EDGE_CURVE('',#248243,#248251,#248253,.T.); +#248251 = VERTEX_POINT('',#248252); +#248252 = CARTESIAN_POINT('',(198.331683,-46.749109,1.585)); +#248253 = LINE('',#248254,#248255); +#248254 = CARTESIAN_POINT('',(198.091055,-46.749109,1.585)); +#248255 = VECTOR('',#248256,1.); +#248256 = DIRECTION('',(1.,0.,0.)); +#248257 = ORIENTED_EDGE('',*,*,#248258,.T.); +#248258 = EDGE_CURVE('',#248251,#248259,#248261,.T.); +#248259 = VERTEX_POINT('',#248260); +#248260 = CARTESIAN_POINT('',(198.464864,-46.615928,1.585)); +#248261 = CIRCLE('',#248262,0.18686440374); +#248262 = AXIS2_PLACEMENT_3D('',#248263,#248264,#248265); +#248263 = CARTESIAN_POINT('',(198.284147,-46.568392,1.585)); +#248264 = DIRECTION('',(0.,0.,1.)); +#248265 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248266 = ORIENTED_EDGE('',*,*,#248267,.T.); +#248267 = EDGE_CURVE('',#248259,#248224,#248268,.T.); +#248268 = LINE('',#248269,#248270); +#248269 = CARTESIAN_POINT('',(198.464864,-46.615928,1.585)); +#248270 = VECTOR('',#248271,1.); +#248271 = DIRECTION('',(0.,1.,0.)); +#248272 = PLANE('',#248273); +#248273 = AXIS2_PLACEMENT_3D('',#248274,#248275,#248276); +#248274 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248275 = DIRECTION('',(0.,0.,1.)); +#248276 = DIRECTION('',(1.,0.,-0.)); +#248277 = SHELL_BASED_SURFACE_MODEL('',(#248278)); +#248278 = OPEN_SHELL('',(#248279)); +#248279 = ADVANCED_FACE('',(#248280,#248398,#248465),#248517,.T.); +#248280 = FACE_BOUND('',#248281,.F.); +#248281 = EDGE_LOOP('',(#248282,#248293,#248301,#248310,#248318,#248326, + #248334,#248342,#248350,#248359,#248367,#248376,#248384,#248392)); +#248282 = ORIENTED_EDGE('',*,*,#248283,.T.); +#248283 = EDGE_CURVE('',#248284,#248286,#248288,.T.); +#248284 = VERTEX_POINT('',#248285); +#248285 = CARTESIAN_POINT('',(201.942496,-46.333287,1.585)); +#248286 = VERTEX_POINT('',#248287); +#248287 = CARTESIAN_POINT('',(202.016055,-46.272919,1.585)); +#248288 = CIRCLE('',#248289,7.500074938986E-02); +#248289 = AXIS2_PLACEMENT_3D('',#248290,#248291,#248292); +#248290 = CARTESIAN_POINT('',(202.01605546611,-46.34791974938,1.585)); +#248291 = DIRECTION('',(0.,0.,-1.)); +#248292 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#248293 = ORIENTED_EDGE('',*,*,#248294,.T.); +#248294 = EDGE_CURVE('',#248286,#248295,#248297,.T.); +#248295 = VERTEX_POINT('',#248296); +#248296 = CARTESIAN_POINT('',(202.36402,-46.27436,1.585)); +#248297 = LINE('',#248298,#248299); +#248298 = CARTESIAN_POINT('',(202.016055,-46.272919,1.585)); +#248299 = VECTOR('',#248300,1.); +#248300 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#248301 = ORIENTED_EDGE('',*,*,#248302,.T.); +#248302 = EDGE_CURVE('',#248295,#248303,#248305,.T.); +#248303 = VERTEX_POINT('',#248304); +#248304 = CARTESIAN_POINT('',(202.613423,-46.523763,1.585)); +#248305 = CIRCLE('',#248306,0.347870264855); +#248306 = AXIS2_PLACEMENT_3D('',#248307,#248308,#248309); +#248307 = CARTESIAN_POINT('',(202.27669226502,-46.61109073497,1.585)); +#248308 = DIRECTION('',(0.,0.,-1.)); +#248309 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#248310 = ORIENTED_EDGE('',*,*,#248311,.T.); +#248311 = EDGE_CURVE('',#248303,#248312,#248314,.T.); +#248312 = VERTEX_POINT('',#248313); +#248313 = CARTESIAN_POINT('',(202.612201,-46.653443,1.585)); +#248314 = LINE('',#248315,#248316); +#248315 = CARTESIAN_POINT('',(202.613423,-46.523763,1.585)); +#248316 = VECTOR('',#248317,1.); +#248317 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#248318 = ORIENTED_EDGE('',*,*,#248319,.T.); +#248319 = EDGE_CURVE('',#248312,#248320,#248322,.T.); +#248320 = VERTEX_POINT('',#248321); +#248321 = CARTESIAN_POINT('',(202.549996,-46.776154,1.585)); +#248322 = LINE('',#248323,#248324); +#248323 = CARTESIAN_POINT('',(202.612201,-46.653443,1.585)); +#248324 = VECTOR('',#248325,1.); +#248325 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#248326 = ORIENTED_EDGE('',*,*,#248327,.T.); +#248327 = EDGE_CURVE('',#248320,#248328,#248330,.T.); +#248328 = VERTEX_POINT('',#248329); +#248329 = CARTESIAN_POINT('',(202.523319,-46.803862,1.585)); +#248330 = LINE('',#248331,#248332); +#248331 = CARTESIAN_POINT('',(202.549996,-46.776154,1.585)); +#248332 = VECTOR('',#248333,1.); +#248333 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#248334 = ORIENTED_EDGE('',*,*,#248335,.T.); +#248335 = EDGE_CURVE('',#248328,#248336,#248338,.T.); +#248336 = VERTEX_POINT('',#248337); +#248337 = CARTESIAN_POINT('',(202.545278,-46.818695,1.585)); +#248338 = LINE('',#248339,#248340); +#248339 = CARTESIAN_POINT('',(202.523319,-46.803862,1.585)); +#248340 = VECTOR('',#248341,1.); +#248341 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#248342 = ORIENTED_EDGE('',*,*,#248343,.T.); +#248343 = EDGE_CURVE('',#248336,#248344,#248346,.T.); +#248344 = VERTEX_POINT('',#248345); +#248345 = CARTESIAN_POINT('',(202.606946,-46.885806,1.585)); +#248346 = LINE('',#248347,#248348); +#248347 = CARTESIAN_POINT('',(202.545278,-46.818695,1.585)); +#248348 = VECTOR('',#248349,1.); +#248349 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#248350 = ORIENTED_EDGE('',*,*,#248351,.T.); +#248351 = EDGE_CURVE('',#248344,#248352,#248354,.T.); +#248352 = VERTEX_POINT('',#248353); +#248353 = CARTESIAN_POINT('',(202.597615,-47.299963,1.585)); +#248354 = CIRCLE('',#248355,0.341850333486); +#248355 = AXIS2_PLACEMENT_3D('',#248356,#248357,#248358); +#248356 = CARTESIAN_POINT('',(202.33039659864,-47.08675892761,1.585)); +#248357 = DIRECTION('',(0.,0.,-1.)); +#248358 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#248359 = ORIENTED_EDGE('',*,*,#248360,.T.); +#248360 = EDGE_CURVE('',#248352,#248361,#248363,.T.); +#248361 = VERTEX_POINT('',#248362); +#248362 = CARTESIAN_POINT('',(202.532085,-47.363417,1.585)); +#248363 = LINE('',#248364,#248365); +#248364 = CARTESIAN_POINT('',(202.597615,-47.299963,1.585)); +#248365 = VECTOR('',#248366,1.); +#248366 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#248367 = ORIENTED_EDGE('',*,*,#248368,.T.); +#248368 = EDGE_CURVE('',#248361,#248369,#248371,.T.); +#248369 = VERTEX_POINT('',#248370); +#248370 = CARTESIAN_POINT('',(201.974387,-47.410279,1.585)); +#248371 = CIRCLE('',#248372,0.612118292739); +#248372 = AXIS2_PLACEMENT_3D('',#248373,#248374,#248375); +#248373 = CARTESIAN_POINT('',(202.20765114383,-46.84434910725,1.585)); +#248374 = DIRECTION('',(-0.,0.,-1.)); +#248375 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#248376 = ORIENTED_EDGE('',*,*,#248377,.T.); +#248377 = EDGE_CURVE('',#248369,#248378,#248380,.T.); +#248378 = VERTEX_POINT('',#248379); +#248379 = CARTESIAN_POINT('',(201.953695,-47.389587,1.585)); +#248380 = LINE('',#248381,#248382); +#248381 = CARTESIAN_POINT('',(201.974387,-47.410279,1.585)); +#248382 = VECTOR('',#248383,1.); +#248383 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#248384 = ORIENTED_EDGE('',*,*,#248385,.T.); +#248385 = EDGE_CURVE('',#248378,#248386,#248388,.T.); +#248386 = VERTEX_POINT('',#248387); +#248387 = CARTESIAN_POINT('',(201.941055,-47.347919,1.585)); +#248388 = LINE('',#248389,#248390); +#248389 = CARTESIAN_POINT('',(201.953695,-47.389587,1.585)); +#248390 = VECTOR('',#248391,1.); +#248391 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#248392 = ORIENTED_EDGE('',*,*,#248393,.T.); +#248393 = EDGE_CURVE('',#248386,#248284,#248394,.T.); +#248394 = LINE('',#248395,#248396); +#248395 = CARTESIAN_POINT('',(201.941055,-47.347919,1.585)); +#248396 = VECTOR('',#248397,1.); +#248397 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#248398 = FACE_BOUND('',#248399,.F.); +#248399 = EDGE_LOOP('',(#248400,#248410,#248418,#248426,#248434,#248443, + #248451,#248459)); +#248400 = ORIENTED_EDGE('',*,*,#248401,.T.); +#248401 = EDGE_CURVE('',#248402,#248404,#248406,.T.); +#248402 = VERTEX_POINT('',#248403); +#248403 = CARTESIAN_POINT('',(202.451731,-46.93728,1.585)); +#248404 = VERTEX_POINT('',#248405); +#248405 = CARTESIAN_POINT('',(202.337218,-46.899109,1.585)); +#248406 = LINE('',#248407,#248408); +#248407 = CARTESIAN_POINT('',(202.451731,-46.93728,1.585)); +#248408 = VECTOR('',#248409,1.); +#248409 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#248410 = ORIENTED_EDGE('',*,*,#248411,.T.); +#248411 = EDGE_CURVE('',#248404,#248412,#248414,.T.); +#248412 = VERTEX_POINT('',#248413); +#248413 = CARTESIAN_POINT('',(202.091055,-46.899109,1.585)); +#248414 = LINE('',#248415,#248416); +#248415 = CARTESIAN_POINT('',(202.337218,-46.899109,1.585)); +#248416 = VECTOR('',#248417,1.); +#248417 = DIRECTION('',(-1.,0.,0.)); +#248418 = ORIENTED_EDGE('',*,*,#248419,.T.); +#248419 = EDGE_CURVE('',#248412,#248420,#248422,.T.); +#248420 = VERTEX_POINT('',#248421); +#248421 = CARTESIAN_POINT('',(202.091055,-47.272919,1.585)); +#248422 = LINE('',#248423,#248424); +#248423 = CARTESIAN_POINT('',(202.091055,-46.899109,1.585)); +#248424 = VECTOR('',#248425,1.); +#248425 = DIRECTION('',(0.,-1.,0.)); +#248426 = ORIENTED_EDGE('',*,*,#248427,.T.); +#248427 = EDGE_CURVE('',#248420,#248428,#248430,.T.); +#248428 = VERTEX_POINT('',#248429); +#248429 = CARTESIAN_POINT('',(202.379302,-47.272919,1.585)); +#248430 = LINE('',#248431,#248432); +#248431 = CARTESIAN_POINT('',(202.091055,-47.272919,1.585)); +#248432 = VECTOR('',#248433,1.); +#248433 = DIRECTION('',(1.,0.,0.)); +#248434 = ORIENTED_EDGE('',*,*,#248435,.T.); +#248435 = EDGE_CURVE('',#248428,#248436,#248438,.T.); +#248436 = VERTEX_POINT('',#248437); +#248437 = CARTESIAN_POINT('',(202.512483,-47.139737,1.585)); +#248438 = CIRCLE('',#248439,0.186867760544); +#248439 = AXIS2_PLACEMENT_3D('',#248440,#248441,#248442); +#248440 = CARTESIAN_POINT('',(202.33176296928,-47.09219932622,1.585)); +#248441 = DIRECTION('',(0.,0.,1.)); +#248442 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#248443 = ORIENTED_EDGE('',*,*,#248444,.T.); +#248444 = EDGE_CURVE('',#248436,#248445,#248447,.T.); +#248445 = VERTEX_POINT('',#248446); +#248446 = CARTESIAN_POINT('',(202.512483,-47.03229,1.585)); +#248447 = LINE('',#248448,#248449); +#248448 = CARTESIAN_POINT('',(202.512483,-47.139737,1.585)); +#248449 = VECTOR('',#248450,1.); +#248450 = DIRECTION('',(0.,1.,0.)); +#248451 = ORIENTED_EDGE('',*,*,#248452,.T.); +#248452 = EDGE_CURVE('',#248445,#248453,#248455,.T.); +#248453 = VERTEX_POINT('',#248454); +#248454 = CARTESIAN_POINT('',(202.478225,-46.963774,1.585)); +#248455 = LINE('',#248456,#248457); +#248456 = CARTESIAN_POINT('',(202.512483,-47.03229,1.585)); +#248457 = VECTOR('',#248458,1.); +#248458 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#248459 = ORIENTED_EDGE('',*,*,#248460,.T.); +#248460 = EDGE_CURVE('',#248453,#248402,#248461,.T.); +#248461 = LINE('',#248462,#248463); +#248462 = CARTESIAN_POINT('',(202.478225,-46.963774,1.585)); +#248463 = VECTOR('',#248464,1.); +#248464 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248465 = FACE_BOUND('',#248466,.F.); +#248466 = EDGE_LOOP('',(#248467,#248478,#248486,#248494,#248502,#248511) + ); +#248467 = ORIENTED_EDGE('',*,*,#248468,.T.); +#248468 = EDGE_CURVE('',#248469,#248471,#248473,.T.); +#248469 = VERTEX_POINT('',#248470); +#248470 = CARTESIAN_POINT('',(202.464864,-46.5561,1.585)); +#248471 = VERTEX_POINT('',#248472); +#248472 = CARTESIAN_POINT('',(202.331683,-46.422919,1.585)); +#248473 = CIRCLE('',#248474,0.18686440374); +#248474 = AXIS2_PLACEMENT_3D('',#248475,#248476,#248477); +#248475 = CARTESIAN_POINT('',(202.284147,-46.603636,1.585)); +#248476 = DIRECTION('',(0.,0.,1.)); +#248477 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#248478 = ORIENTED_EDGE('',*,*,#248479,.T.); +#248479 = EDGE_CURVE('',#248471,#248480,#248482,.T.); +#248480 = VERTEX_POINT('',#248481); +#248481 = CARTESIAN_POINT('',(202.091055,-46.422919,1.585)); +#248482 = LINE('',#248483,#248484); +#248483 = CARTESIAN_POINT('',(202.331683,-46.422919,1.585)); +#248484 = VECTOR('',#248485,1.); +#248485 = DIRECTION('',(-1.,0.,0.)); +#248486 = ORIENTED_EDGE('',*,*,#248487,.T.); +#248487 = EDGE_CURVE('',#248480,#248488,#248490,.T.); +#248488 = VERTEX_POINT('',#248489); +#248489 = CARTESIAN_POINT('',(202.091055,-46.749109,1.585)); +#248490 = LINE('',#248491,#248492); +#248491 = CARTESIAN_POINT('',(202.091055,-46.422919,1.585)); +#248492 = VECTOR('',#248493,1.); +#248493 = DIRECTION('',(0.,-1.,0.)); +#248494 = ORIENTED_EDGE('',*,*,#248495,.T.); +#248495 = EDGE_CURVE('',#248488,#248496,#248498,.T.); +#248496 = VERTEX_POINT('',#248497); +#248497 = CARTESIAN_POINT('',(202.331683,-46.749109,1.585)); +#248498 = LINE('',#248499,#248500); +#248499 = CARTESIAN_POINT('',(202.091055,-46.749109,1.585)); +#248500 = VECTOR('',#248501,1.); +#248501 = DIRECTION('',(1.,0.,0.)); +#248502 = ORIENTED_EDGE('',*,*,#248503,.T.); +#248503 = EDGE_CURVE('',#248496,#248504,#248506,.T.); +#248504 = VERTEX_POINT('',#248505); +#248505 = CARTESIAN_POINT('',(202.464864,-46.615928,1.585)); +#248506 = CIRCLE('',#248507,0.18686440374); +#248507 = AXIS2_PLACEMENT_3D('',#248508,#248509,#248510); +#248508 = CARTESIAN_POINT('',(202.284147,-46.568392,1.585)); +#248509 = DIRECTION('',(0.,0.,1.)); +#248510 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248511 = ORIENTED_EDGE('',*,*,#248512,.T.); +#248512 = EDGE_CURVE('',#248504,#248469,#248513,.T.); +#248513 = LINE('',#248514,#248515); +#248514 = CARTESIAN_POINT('',(202.464864,-46.615928,1.585)); +#248515 = VECTOR('',#248516,1.); +#248516 = DIRECTION('',(0.,1.,0.)); +#248517 = PLANE('',#248518); +#248518 = AXIS2_PLACEMENT_3D('',#248519,#248520,#248521); +#248519 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248520 = DIRECTION('',(0.,0.,1.)); +#248521 = DIRECTION('',(1.,0.,-0.)); +#248522 = SHELL_BASED_SURFACE_MODEL('',(#248523)); +#248523 = OPEN_SHELL('',(#248524)); +#248524 = ADVANCED_FACE('',(#248525),#248711,.T.); +#248525 = FACE_BOUND('',#248526,.F.); +#248526 = EDGE_LOOP('',(#248527,#248538,#248546,#248555,#248563,#248571, + #248580,#248588,#248597,#248605,#248613,#248621,#248630,#248638, + #248647,#248655,#248664,#248672,#248680,#248688,#248697,#248705)); +#248527 = ORIENTED_EDGE('',*,*,#248528,.T.); +#248528 = EDGE_CURVE('',#248529,#248531,#248533,.T.); +#248529 = VERTEX_POINT('',#248530); +#248530 = CARTESIAN_POINT('',(202.906185,-46.421478,1.585)); +#248531 = VERTEX_POINT('',#248532); +#248532 = CARTESIAN_POINT('',(202.920817,-46.272919,1.585)); +#248533 = CIRCLE('',#248534,7.500006711464E-02); +#248534 = AXIS2_PLACEMENT_3D('',#248535,#248536,#248537); +#248535 = CARTESIAN_POINT('',(202.92081693288,-46.34791906711,1.585)); +#248536 = DIRECTION('',(0.,0.,-1.)); +#248537 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#248538 = ORIENTED_EDGE('',*,*,#248539,.T.); +#248539 = EDGE_CURVE('',#248531,#248540,#248542,.T.); +#248540 = VERTEX_POINT('',#248541); +#248541 = CARTESIAN_POINT('',(203.547602,-46.273681,1.585)); +#248542 = LINE('',#248543,#248544); +#248543 = CARTESIAN_POINT('',(202.920817,-46.272919,1.585)); +#248544 = VECTOR('',#248545,1.); +#248545 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#248546 = ORIENTED_EDGE('',*,*,#248547,.T.); +#248547 = EDGE_CURVE('',#248540,#248548,#248550,.T.); +#248548 = VERTEX_POINT('',#248549); +#248549 = CARTESIAN_POINT('',(203.613423,-46.362551,1.585)); +#248550 = CIRCLE('',#248551,7.447391611626E-02); +#248551 = AXIS2_PLACEMENT_3D('',#248552,#248553,#248554); +#248552 = CARTESIAN_POINT('',(203.54042292664,-46.3478080874,1.585)); +#248553 = DIRECTION('',(0.,0.,-1.)); +#248554 = DIRECTION('',(9.639715124815E-02,0.995342950561,0.)); +#248555 = ORIENTED_EDGE('',*,*,#248556,.T.); +#248556 = EDGE_CURVE('',#248548,#248557,#248559,.T.); +#248557 = VERTEX_POINT('',#248558); +#248558 = CARTESIAN_POINT('',(203.596307,-46.397307,1.585)); +#248559 = LINE('',#248560,#248561); +#248560 = CARTESIAN_POINT('',(203.613423,-46.362551,1.585)); +#248561 = VECTOR('',#248562,1.); +#248562 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#248563 = ORIENTED_EDGE('',*,*,#248564,.T.); +#248564 = EDGE_CURVE('',#248557,#248565,#248567,.T.); +#248565 = VERTEX_POINT('',#248566); +#248566 = CARTESIAN_POINT('',(203.369411,-46.656616,1.585)); +#248567 = LINE('',#248568,#248569); +#248568 = CARTESIAN_POINT('',(203.596307,-46.397307,1.585)); +#248569 = VECTOR('',#248570,1.); +#248570 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#248571 = ORIENTED_EDGE('',*,*,#248572,.T.); +#248572 = EDGE_CURVE('',#248565,#248573,#248575,.T.); +#248573 = VERTEX_POINT('',#248574); +#248574 = CARTESIAN_POINT('',(203.613423,-46.904715,1.585)); +#248575 = CIRCLE('',#248576,0.348520834816); +#248576 = AXIS2_PLACEMENT_3D('',#248577,#248578,#248579); +#248577 = CARTESIAN_POINT('',(203.2761176174,-46.99241819931,1.585)); +#248578 = DIRECTION('',(0.,0.,-1.)); +#248579 = DIRECTION('',(0.267683803322,0.963506814423,0.)); +#248580 = ORIENTED_EDGE('',*,*,#248581,.T.); +#248581 = EDGE_CURVE('',#248573,#248582,#248584,.T.); +#248582 = VERTEX_POINT('',#248583); +#248583 = CARTESIAN_POINT('',(203.612201,-47.177252,1.585)); +#248584 = LINE('',#248585,#248586); +#248585 = CARTESIAN_POINT('',(203.613423,-46.904715,1.585)); +#248586 = VECTOR('',#248587,1.); +#248587 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#248588 = ORIENTED_EDGE('',*,*,#248589,.T.); +#248589 = EDGE_CURVE('',#248582,#248590,#248592,.T.); +#248590 = VERTEX_POINT('',#248591); +#248591 = CARTESIAN_POINT('',(203.36402,-47.421478,1.585)); +#248592 = CIRCLE('',#248593,0.348635327447); +#248593 = AXIS2_PLACEMENT_3D('',#248594,#248595,#248596); +#248594 = CARTESIAN_POINT('',(203.27624848129,-47.08407208415,1.585)); +#248595 = DIRECTION('',(0.,0.,-1.)); +#248596 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#248597 = ORIENTED_EDGE('',*,*,#248598,.T.); +#248598 = EDGE_CURVE('',#248590,#248599,#248601,.T.); +#248599 = VERTEX_POINT('',#248600); +#248600 = CARTESIAN_POINT('',(203.043864,-47.420256,1.585)); +#248601 = LINE('',#248602,#248603); +#248602 = CARTESIAN_POINT('',(203.36402,-47.421478,1.585)); +#248603 = VECTOR('',#248604,1.); +#248604 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#248605 = ORIENTED_EDGE('',*,*,#248606,.T.); +#248606 = EDGE_CURVE('',#248599,#248607,#248609,.T.); +#248607 = VERTEX_POINT('',#248608); +#248608 = CARTESIAN_POINT('',(202.921151,-47.35805,1.585)); +#248609 = LINE('',#248610,#248611); +#248610 = CARTESIAN_POINT('',(203.043864,-47.420256,1.585)); +#248611 = VECTOR('',#248612,1.); +#248612 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#248613 = ORIENTED_EDGE('',*,*,#248614,.T.); +#248614 = EDGE_CURVE('',#248607,#248615,#248617,.T.); +#248615 = VERTEX_POINT('',#248616); +#248616 = CARTESIAN_POINT('',(202.858456,-47.294347,1.585)); +#248617 = LINE('',#248618,#248619); +#248618 = CARTESIAN_POINT('',(202.921151,-47.35805,1.585)); +#248619 = VECTOR('',#248620,1.); +#248620 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#248621 = ORIENTED_EDGE('',*,*,#248622,.T.); +#248622 = EDGE_CURVE('',#248615,#248623,#248625,.T.); +#248623 = VERTEX_POINT('',#248624); +#248624 = CARTESIAN_POINT('',(202.973851,-47.199648,1.585)); +#248625 = CIRCLE('',#248626,7.500012668041E-02); +#248626 = AXIS2_PLACEMENT_3D('',#248627,#248628,#248629); +#248627 = CARTESIAN_POINT('',(202.92081705199,-47.25268024831,1.585)); +#248628 = DIRECTION('',(0.,0.,-1.)); +#248629 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#248630 = ORIENTED_EDGE('',*,*,#248631,.T.); +#248631 = EDGE_CURVE('',#248623,#248632,#248634,.T.); +#248632 = VERTEX_POINT('',#248633); +#248633 = CARTESIAN_POINT('',(203.012863,-47.238661,1.585)); +#248634 = LINE('',#248635,#248636); +#248635 = CARTESIAN_POINT('',(202.973851,-47.199648,1.585)); +#248636 = VECTOR('',#248637,1.); +#248637 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#248638 = ORIENTED_EDGE('',*,*,#248639,.T.); +#248639 = EDGE_CURVE('',#248632,#248640,#248642,.T.); +#248640 = VERTEX_POINT('',#248641); +#248641 = CARTESIAN_POINT('',(203.400198,-47.238661,1.585)); +#248642 = CIRCLE('',#248643,0.358502380266); +#248643 = AXIS2_PLACEMENT_3D('',#248644,#248645,#248646); +#248644 = CARTESIAN_POINT('',(203.2065305,-46.936971,1.585)); +#248645 = DIRECTION('',(0.,0.,1.)); +#248646 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#248647 = ORIENTED_EDGE('',*,*,#248648,.T.); +#248648 = EDGE_CURVE('',#248640,#248649,#248651,.T.); +#248649 = VERTEX_POINT('',#248650); +#248650 = CARTESIAN_POINT('',(203.430605,-47.208253,1.585)); +#248651 = LINE('',#248652,#248653); +#248652 = CARTESIAN_POINT('',(203.400198,-47.238661,1.585)); +#248653 = VECTOR('',#248654,1.); +#248654 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#248655 = ORIENTED_EDGE('',*,*,#248656,.T.); +#248656 = EDGE_CURVE('',#248649,#248657,#248659,.T.); +#248657 = VERTEX_POINT('',#248658); +#248658 = CARTESIAN_POINT('',(203.430606,-46.868536,1.585)); +#248659 = CIRCLE('',#248660,0.305616146029); +#248660 = AXIS2_PLACEMENT_3D('',#248661,#248662,#248663); +#248661 = CARTESIAN_POINT('',(203.17653992049,-47.03839375212,1.585)); +#248662 = DIRECTION('',(0.,-0.,1.)); +#248663 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#248664 = ORIENTED_EDGE('',*,*,#248665,.T.); +#248665 = EDGE_CURVE('',#248657,#248666,#248668,.T.); +#248666 = VERTEX_POINT('',#248667); +#248667 = CARTESIAN_POINT('',(203.400199,-46.838129,1.585)); +#248668 = LINE('',#248669,#248670); +#248669 = CARTESIAN_POINT('',(203.430606,-46.868536,1.585)); +#248670 = VECTOR('',#248671,1.); +#248671 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248672 = ORIENTED_EDGE('',*,*,#248673,.T.); +#248673 = EDGE_CURVE('',#248666,#248674,#248676,.T.); +#248674 = VERTEX_POINT('',#248675); +#248675 = CARTESIAN_POINT('',(203.331683,-46.803871,1.585)); +#248676 = LINE('',#248677,#248678); +#248677 = CARTESIAN_POINT('',(203.400199,-46.838129,1.585)); +#248678 = VECTOR('',#248679,1.); +#248679 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#248680 = ORIENTED_EDGE('',*,*,#248681,.T.); +#248681 = EDGE_CURVE('',#248674,#248682,#248684,.T.); +#248682 = VERTEX_POINT('',#248683); +#248683 = CARTESIAN_POINT('',(203.191899,-46.80243,1.585)); +#248684 = LINE('',#248685,#248686); +#248685 = CARTESIAN_POINT('',(203.331683,-46.803871,1.585)); +#248686 = VECTOR('',#248687,1.); +#248687 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#248688 = ORIENTED_EDGE('',*,*,#248689,.T.); +#248689 = EDGE_CURVE('',#248682,#248690,#248692,.T.); +#248690 = VERTEX_POINT('',#248691); +#248691 = CARTESIAN_POINT('',(203.150088,-46.679483,1.585)); +#248692 = CIRCLE('',#248693,7.500015628756E-02); +#248693 = AXIS2_PLACEMENT_3D('',#248694,#248695,#248696); +#248694 = CARTESIAN_POINT('',(203.20653128432,-46.7288710461,1.585)); +#248695 = DIRECTION('',(0.,0.,-1.)); +#248696 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#248697 = ORIENTED_EDGE('',*,*,#248698,.T.); +#248698 = EDGE_CURVE('',#248690,#248699,#248701,.T.); +#248699 = VERTEX_POINT('',#248700); +#248700 = CARTESIAN_POINT('',(203.374582,-46.422919,1.585)); +#248701 = LINE('',#248702,#248703); +#248702 = CARTESIAN_POINT('',(203.150088,-46.679483,1.585)); +#248703 = VECTOR('',#248704,1.); +#248704 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#248705 = ORIENTED_EDGE('',*,*,#248706,.T.); +#248706 = EDGE_CURVE('',#248699,#248529,#248707,.T.); +#248707 = LINE('',#248708,#248709); +#248708 = CARTESIAN_POINT('',(203.374582,-46.422919,1.585)); +#248709 = VECTOR('',#248710,1.); +#248710 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#248711 = PLANE('',#248712); +#248712 = AXIS2_PLACEMENT_3D('',#248713,#248714,#248715); +#248713 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248714 = DIRECTION('',(0.,0.,1.)); +#248715 = DIRECTION('',(1.,0.,-0.)); +#248716 = SHELL_BASED_SURFACE_MODEL('',(#248717)); +#248717 = OPEN_SHELL('',(#248718)); +#248718 = ADVANCED_FACE('',(#248719,#248837,#248904),#248956,.T.); +#248719 = FACE_BOUND('',#248720,.F.); +#248720 = EDGE_LOOP('',(#248721,#248732,#248740,#248749,#248757,#248765, + #248773,#248781,#248789,#248798,#248806,#248815,#248823,#248831)); +#248721 = ORIENTED_EDGE('',*,*,#248722,.T.); +#248722 = EDGE_CURVE('',#248723,#248725,#248727,.T.); +#248723 = VERTEX_POINT('',#248724); +#248724 = CARTESIAN_POINT('',(205.942496,-46.333287,1.585)); +#248725 = VERTEX_POINT('',#248726); +#248726 = CARTESIAN_POINT('',(206.016055,-46.272919,1.585)); +#248727 = CIRCLE('',#248728,7.500074938986E-02); +#248728 = AXIS2_PLACEMENT_3D('',#248729,#248730,#248731); +#248729 = CARTESIAN_POINT('',(206.01605546611,-46.34791974938,1.585)); +#248730 = DIRECTION('',(0.,0.,-1.)); +#248731 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#248732 = ORIENTED_EDGE('',*,*,#248733,.T.); +#248733 = EDGE_CURVE('',#248725,#248734,#248736,.T.); +#248734 = VERTEX_POINT('',#248735); +#248735 = CARTESIAN_POINT('',(206.36402,-46.27436,1.585)); +#248736 = LINE('',#248737,#248738); +#248737 = CARTESIAN_POINT('',(206.016055,-46.272919,1.585)); +#248738 = VECTOR('',#248739,1.); +#248739 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#248740 = ORIENTED_EDGE('',*,*,#248741,.T.); +#248741 = EDGE_CURVE('',#248734,#248742,#248744,.T.); +#248742 = VERTEX_POINT('',#248743); +#248743 = CARTESIAN_POINT('',(206.613423,-46.523763,1.585)); +#248744 = CIRCLE('',#248745,0.347870264855); +#248745 = AXIS2_PLACEMENT_3D('',#248746,#248747,#248748); +#248746 = CARTESIAN_POINT('',(206.27669226502,-46.61109073497,1.585)); +#248747 = DIRECTION('',(0.,0.,-1.)); +#248748 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#248749 = ORIENTED_EDGE('',*,*,#248750,.T.); +#248750 = EDGE_CURVE('',#248742,#248751,#248753,.T.); +#248751 = VERTEX_POINT('',#248752); +#248752 = CARTESIAN_POINT('',(206.612201,-46.653443,1.585)); +#248753 = LINE('',#248754,#248755); +#248754 = CARTESIAN_POINT('',(206.613423,-46.523763,1.585)); +#248755 = VECTOR('',#248756,1.); +#248756 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#248757 = ORIENTED_EDGE('',*,*,#248758,.T.); +#248758 = EDGE_CURVE('',#248751,#248759,#248761,.T.); +#248759 = VERTEX_POINT('',#248760); +#248760 = CARTESIAN_POINT('',(206.549996,-46.776154,1.585)); +#248761 = LINE('',#248762,#248763); +#248762 = CARTESIAN_POINT('',(206.612201,-46.653443,1.585)); +#248763 = VECTOR('',#248764,1.); +#248764 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#248765 = ORIENTED_EDGE('',*,*,#248766,.T.); +#248766 = EDGE_CURVE('',#248759,#248767,#248769,.T.); +#248767 = VERTEX_POINT('',#248768); +#248768 = CARTESIAN_POINT('',(206.523319,-46.803862,1.585)); +#248769 = LINE('',#248770,#248771); +#248770 = CARTESIAN_POINT('',(206.549996,-46.776154,1.585)); +#248771 = VECTOR('',#248772,1.); +#248772 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#248773 = ORIENTED_EDGE('',*,*,#248774,.T.); +#248774 = EDGE_CURVE('',#248767,#248775,#248777,.T.); +#248775 = VERTEX_POINT('',#248776); +#248776 = CARTESIAN_POINT('',(206.545278,-46.818695,1.585)); +#248777 = LINE('',#248778,#248779); +#248778 = CARTESIAN_POINT('',(206.523319,-46.803862,1.585)); +#248779 = VECTOR('',#248780,1.); +#248780 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#248781 = ORIENTED_EDGE('',*,*,#248782,.T.); +#248782 = EDGE_CURVE('',#248775,#248783,#248785,.T.); +#248783 = VERTEX_POINT('',#248784); +#248784 = CARTESIAN_POINT('',(206.606946,-46.885806,1.585)); +#248785 = LINE('',#248786,#248787); +#248786 = CARTESIAN_POINT('',(206.545278,-46.818695,1.585)); +#248787 = VECTOR('',#248788,1.); +#248788 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#248789 = ORIENTED_EDGE('',*,*,#248790,.T.); +#248790 = EDGE_CURVE('',#248783,#248791,#248793,.T.); +#248791 = VERTEX_POINT('',#248792); +#248792 = CARTESIAN_POINT('',(206.597615,-47.299963,1.585)); +#248793 = CIRCLE('',#248794,0.341850333486); +#248794 = AXIS2_PLACEMENT_3D('',#248795,#248796,#248797); +#248795 = CARTESIAN_POINT('',(206.33039659864,-47.08675892761,1.585)); +#248796 = DIRECTION('',(0.,0.,-1.)); +#248797 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#248798 = ORIENTED_EDGE('',*,*,#248799,.T.); +#248799 = EDGE_CURVE('',#248791,#248800,#248802,.T.); +#248800 = VERTEX_POINT('',#248801); +#248801 = CARTESIAN_POINT('',(206.532085,-47.363417,1.585)); +#248802 = LINE('',#248803,#248804); +#248803 = CARTESIAN_POINT('',(206.597615,-47.299963,1.585)); +#248804 = VECTOR('',#248805,1.); +#248805 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#248806 = ORIENTED_EDGE('',*,*,#248807,.T.); +#248807 = EDGE_CURVE('',#248800,#248808,#248810,.T.); +#248808 = VERTEX_POINT('',#248809); +#248809 = CARTESIAN_POINT('',(205.974387,-47.410279,1.585)); +#248810 = CIRCLE('',#248811,0.612118292739); +#248811 = AXIS2_PLACEMENT_3D('',#248812,#248813,#248814); +#248812 = CARTESIAN_POINT('',(206.20765114383,-46.84434910725,1.585)); +#248813 = DIRECTION('',(-0.,0.,-1.)); +#248814 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#248815 = ORIENTED_EDGE('',*,*,#248816,.T.); +#248816 = EDGE_CURVE('',#248808,#248817,#248819,.T.); +#248817 = VERTEX_POINT('',#248818); +#248818 = CARTESIAN_POINT('',(205.953695,-47.389587,1.585)); +#248819 = LINE('',#248820,#248821); +#248820 = CARTESIAN_POINT('',(205.974387,-47.410279,1.585)); +#248821 = VECTOR('',#248822,1.); +#248822 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#248823 = ORIENTED_EDGE('',*,*,#248824,.T.); +#248824 = EDGE_CURVE('',#248817,#248825,#248827,.T.); +#248825 = VERTEX_POINT('',#248826); +#248826 = CARTESIAN_POINT('',(205.941055,-47.347919,1.585)); +#248827 = LINE('',#248828,#248829); +#248828 = CARTESIAN_POINT('',(205.953695,-47.389587,1.585)); +#248829 = VECTOR('',#248830,1.); +#248830 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#248831 = ORIENTED_EDGE('',*,*,#248832,.T.); +#248832 = EDGE_CURVE('',#248825,#248723,#248833,.T.); +#248833 = LINE('',#248834,#248835); +#248834 = CARTESIAN_POINT('',(205.941055,-47.347919,1.585)); +#248835 = VECTOR('',#248836,1.); +#248836 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#248837 = FACE_BOUND('',#248838,.F.); +#248838 = EDGE_LOOP('',(#248839,#248849,#248857,#248865,#248873,#248882, + #248890,#248898)); +#248839 = ORIENTED_EDGE('',*,*,#248840,.T.); +#248840 = EDGE_CURVE('',#248841,#248843,#248845,.T.); +#248841 = VERTEX_POINT('',#248842); +#248842 = CARTESIAN_POINT('',(206.451731,-46.93728,1.585)); +#248843 = VERTEX_POINT('',#248844); +#248844 = CARTESIAN_POINT('',(206.337218,-46.899109,1.585)); +#248845 = LINE('',#248846,#248847); +#248846 = CARTESIAN_POINT('',(206.451731,-46.93728,1.585)); +#248847 = VECTOR('',#248848,1.); +#248848 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#248849 = ORIENTED_EDGE('',*,*,#248850,.T.); +#248850 = EDGE_CURVE('',#248843,#248851,#248853,.T.); +#248851 = VERTEX_POINT('',#248852); +#248852 = CARTESIAN_POINT('',(206.091055,-46.899109,1.585)); +#248853 = LINE('',#248854,#248855); +#248854 = CARTESIAN_POINT('',(206.337218,-46.899109,1.585)); +#248855 = VECTOR('',#248856,1.); +#248856 = DIRECTION('',(-1.,0.,0.)); +#248857 = ORIENTED_EDGE('',*,*,#248858,.T.); +#248858 = EDGE_CURVE('',#248851,#248859,#248861,.T.); +#248859 = VERTEX_POINT('',#248860); +#248860 = CARTESIAN_POINT('',(206.091055,-47.272919,1.585)); +#248861 = LINE('',#248862,#248863); +#248862 = CARTESIAN_POINT('',(206.091055,-46.899109,1.585)); +#248863 = VECTOR('',#248864,1.); +#248864 = DIRECTION('',(0.,-1.,0.)); +#248865 = ORIENTED_EDGE('',*,*,#248866,.T.); +#248866 = EDGE_CURVE('',#248859,#248867,#248869,.T.); +#248867 = VERTEX_POINT('',#248868); +#248868 = CARTESIAN_POINT('',(206.379302,-47.272919,1.585)); +#248869 = LINE('',#248870,#248871); +#248870 = CARTESIAN_POINT('',(206.091055,-47.272919,1.585)); +#248871 = VECTOR('',#248872,1.); +#248872 = DIRECTION('',(1.,0.,0.)); +#248873 = ORIENTED_EDGE('',*,*,#248874,.T.); +#248874 = EDGE_CURVE('',#248867,#248875,#248877,.T.); +#248875 = VERTEX_POINT('',#248876); +#248876 = CARTESIAN_POINT('',(206.512483,-47.139737,1.585)); +#248877 = CIRCLE('',#248878,0.186867760544); +#248878 = AXIS2_PLACEMENT_3D('',#248879,#248880,#248881); +#248879 = CARTESIAN_POINT('',(206.33176296928,-47.09219932622,1.585)); +#248880 = DIRECTION('',(0.,0.,1.)); +#248881 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#248882 = ORIENTED_EDGE('',*,*,#248883,.T.); +#248883 = EDGE_CURVE('',#248875,#248884,#248886,.T.); +#248884 = VERTEX_POINT('',#248885); +#248885 = CARTESIAN_POINT('',(206.512483,-47.03229,1.585)); +#248886 = LINE('',#248887,#248888); +#248887 = CARTESIAN_POINT('',(206.512483,-47.139737,1.585)); +#248888 = VECTOR('',#248889,1.); +#248889 = DIRECTION('',(0.,1.,0.)); +#248890 = ORIENTED_EDGE('',*,*,#248891,.T.); +#248891 = EDGE_CURVE('',#248884,#248892,#248894,.T.); +#248892 = VERTEX_POINT('',#248893); +#248893 = CARTESIAN_POINT('',(206.478225,-46.963774,1.585)); +#248894 = LINE('',#248895,#248896); +#248895 = CARTESIAN_POINT('',(206.512483,-47.03229,1.585)); +#248896 = VECTOR('',#248897,1.); +#248897 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#248898 = ORIENTED_EDGE('',*,*,#248899,.T.); +#248899 = EDGE_CURVE('',#248892,#248841,#248900,.T.); +#248900 = LINE('',#248901,#248902); +#248901 = CARTESIAN_POINT('',(206.478225,-46.963774,1.585)); +#248902 = VECTOR('',#248903,1.); +#248903 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248904 = FACE_BOUND('',#248905,.F.); +#248905 = EDGE_LOOP('',(#248906,#248917,#248925,#248933,#248941,#248950) + ); +#248906 = ORIENTED_EDGE('',*,*,#248907,.T.); +#248907 = EDGE_CURVE('',#248908,#248910,#248912,.T.); +#248908 = VERTEX_POINT('',#248909); +#248909 = CARTESIAN_POINT('',(206.464864,-46.5561,1.585)); +#248910 = VERTEX_POINT('',#248911); +#248911 = CARTESIAN_POINT('',(206.331683,-46.422919,1.585)); +#248912 = CIRCLE('',#248913,0.18686440374); +#248913 = AXIS2_PLACEMENT_3D('',#248914,#248915,#248916); +#248914 = CARTESIAN_POINT('',(206.284147,-46.603636,1.585)); +#248915 = DIRECTION('',(0.,0.,1.)); +#248916 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#248917 = ORIENTED_EDGE('',*,*,#248918,.T.); +#248918 = EDGE_CURVE('',#248910,#248919,#248921,.T.); +#248919 = VERTEX_POINT('',#248920); +#248920 = CARTESIAN_POINT('',(206.091055,-46.422919,1.585)); +#248921 = LINE('',#248922,#248923); +#248922 = CARTESIAN_POINT('',(206.331683,-46.422919,1.585)); +#248923 = VECTOR('',#248924,1.); +#248924 = DIRECTION('',(-1.,0.,0.)); +#248925 = ORIENTED_EDGE('',*,*,#248926,.T.); +#248926 = EDGE_CURVE('',#248919,#248927,#248929,.T.); +#248927 = VERTEX_POINT('',#248928); +#248928 = CARTESIAN_POINT('',(206.091055,-46.749109,1.585)); +#248929 = LINE('',#248930,#248931); +#248930 = CARTESIAN_POINT('',(206.091055,-46.422919,1.585)); +#248931 = VECTOR('',#248932,1.); +#248932 = DIRECTION('',(0.,-1.,0.)); +#248933 = ORIENTED_EDGE('',*,*,#248934,.T.); +#248934 = EDGE_CURVE('',#248927,#248935,#248937,.T.); +#248935 = VERTEX_POINT('',#248936); +#248936 = CARTESIAN_POINT('',(206.331683,-46.749109,1.585)); +#248937 = LINE('',#248938,#248939); +#248938 = CARTESIAN_POINT('',(206.091055,-46.749109,1.585)); +#248939 = VECTOR('',#248940,1.); +#248940 = DIRECTION('',(1.,0.,0.)); +#248941 = ORIENTED_EDGE('',*,*,#248942,.T.); +#248942 = EDGE_CURVE('',#248935,#248943,#248945,.T.); +#248943 = VERTEX_POINT('',#248944); +#248944 = CARTESIAN_POINT('',(206.464864,-46.615928,1.585)); +#248945 = CIRCLE('',#248946,0.18686440374); +#248946 = AXIS2_PLACEMENT_3D('',#248947,#248948,#248949); +#248947 = CARTESIAN_POINT('',(206.284147,-46.568392,1.585)); +#248948 = DIRECTION('',(0.,0.,1.)); +#248949 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248950 = ORIENTED_EDGE('',*,*,#248951,.T.); +#248951 = EDGE_CURVE('',#248943,#248908,#248952,.T.); +#248952 = LINE('',#248953,#248954); +#248953 = CARTESIAN_POINT('',(206.464864,-46.615928,1.585)); +#248954 = VECTOR('',#248955,1.); +#248955 = DIRECTION('',(0.,1.,0.)); +#248956 = PLANE('',#248957); +#248957 = AXIS2_PLACEMENT_3D('',#248958,#248959,#248960); +#248958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248959 = DIRECTION('',(0.,0.,1.)); +#248960 = DIRECTION('',(1.,0.,-0.)); +#248961 = SHELL_BASED_SURFACE_MODEL('',(#248962)); +#248962 = OPEN_SHELL('',(#248963)); +#248963 = ADVANCED_FACE('',(#248964),#249099,.T.); +#248964 = FACE_BOUND('',#248965,.F.); +#248965 = EDGE_LOOP('',(#248966,#248977,#248985,#248993,#249001,#249010, + #249018,#249026,#249035,#249043,#249051,#249060,#249068,#249076, + #249085,#249093)); +#248966 = ORIENTED_EDGE('',*,*,#248967,.T.); +#248967 = EDGE_CURVE('',#248968,#248970,#248972,.T.); +#248968 = VERTEX_POINT('',#248969); +#248969 = CARTESIAN_POINT('',(207.160548,-46.241051,1.585)); +#248970 = VERTEX_POINT('',#248971); +#248971 = CARTESIAN_POINT('',(207.277682,-46.324018,1.585)); +#248972 = CIRCLE('',#248973,7.499955990671E-02); +#248973 = AXIS2_PLACEMENT_3D('',#248974,#248975,#248976); +#248974 = CARTESIAN_POINT('',(207.20653150095,-46.30030006435,1.585)); +#248975 = DIRECTION('',(0.,0.,-1.)); +#248976 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#248977 = ORIENTED_EDGE('',*,*,#248978,.T.); +#248978 = EDGE_CURVE('',#248970,#248979,#248981,.T.); +#248979 = VERTEX_POINT('',#248980); +#248980 = CARTESIAN_POINT('',(207.072493,-46.939585,1.585)); +#248981 = LINE('',#248982,#248983); +#248982 = CARTESIAN_POINT('',(207.277682,-46.324018,1.585)); +#248983 = VECTOR('',#248984,1.); +#248984 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#248985 = ORIENTED_EDGE('',*,*,#248986,.T.); +#248986 = EDGE_CURVE('',#248979,#248987,#248989,.T.); +#248987 = VERTEX_POINT('',#248988); +#248988 = CARTESIAN_POINT('',(207.369626,-46.939585,1.585)); +#248989 = LINE('',#248990,#248991); +#248990 = CARTESIAN_POINT('',(207.072493,-46.939585,1.585)); +#248991 = VECTOR('',#248992,1.); +#248992 = DIRECTION('',(1.,0.,0.)); +#248993 = ORIENTED_EDGE('',*,*,#248994,.T.); +#248994 = EDGE_CURVE('',#248987,#248995,#248997,.T.); +#248995 = VERTEX_POINT('',#248996); +#248996 = CARTESIAN_POINT('',(207.371067,-46.66662,1.585)); +#248997 = LINE('',#248998,#248999); +#248998 = CARTESIAN_POINT('',(207.369626,-46.939585,1.585)); +#248999 = VECTOR('',#249000,1.); +#249000 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#249001 = ORIENTED_EDGE('',*,*,#249002,.T.); +#249002 = EDGE_CURVE('',#248995,#249003,#249005,.T.); +#249003 = VERTEX_POINT('',#249004); +#249004 = CARTESIAN_POINT('',(207.519626,-46.681252,1.585)); +#249005 = CIRCLE('',#249006,7.500006711463E-02); +#249006 = AXIS2_PLACEMENT_3D('',#249007,#249008,#249009); +#249007 = CARTESIAN_POINT('',(207.44462593288,-46.68125193288,1.585)); +#249008 = DIRECTION('',(0.,0.,-1.)); +#249009 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#249010 = ORIENTED_EDGE('',*,*,#249011,.T.); +#249011 = EDGE_CURVE('',#249003,#249012,#249014,.T.); +#249012 = VERTEX_POINT('',#249013); +#249013 = CARTESIAN_POINT('',(207.519626,-46.939585,1.585)); +#249014 = LINE('',#249015,#249016); +#249015 = CARTESIAN_POINT('',(207.519626,-46.681252,1.585)); +#249016 = VECTOR('',#249017,1.); +#249017 = DIRECTION('',(0.,-1.,0.)); +#249018 = ORIENTED_EDGE('',*,*,#249019,.T.); +#249019 = EDGE_CURVE('',#249012,#249020,#249022,.T.); +#249020 = VERTEX_POINT('',#249021); +#249021 = CARTESIAN_POINT('',(207.602115,-46.941026,1.585)); +#249022 = LINE('',#249023,#249024); +#249023 = CARTESIAN_POINT('',(207.519626,-46.939585,1.585)); +#249024 = VECTOR('',#249025,1.); +#249025 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#249026 = ORIENTED_EDGE('',*,*,#249027,.T.); +#249027 = EDGE_CURVE('',#249020,#249028,#249030,.T.); +#249028 = VERTEX_POINT('',#249029); +#249029 = CARTESIAN_POINT('',(207.587483,-47.089585,1.585)); +#249030 = CIRCLE('',#249031,7.500006711465E-02); +#249031 = AXIS2_PLACEMENT_3D('',#249032,#249033,#249034); +#249032 = CARTESIAN_POINT('',(207.58748306711,-47.01458493288,1.585)); +#249033 = DIRECTION('',(0.,0.,-1.)); +#249034 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#249035 = ORIENTED_EDGE('',*,*,#249036,.T.); +#249036 = EDGE_CURVE('',#249028,#249037,#249039,.T.); +#249037 = VERTEX_POINT('',#249038); +#249038 = CARTESIAN_POINT('',(207.519626,-47.089585,1.585)); +#249039 = LINE('',#249040,#249041); +#249040 = CARTESIAN_POINT('',(207.587483,-47.089585,1.585)); +#249041 = VECTOR('',#249042,1.); +#249042 = DIRECTION('',(-1.,0.,0.)); +#249043 = ORIENTED_EDGE('',*,*,#249044,.T.); +#249044 = EDGE_CURVE('',#249037,#249045,#249047,.T.); +#249045 = VERTEX_POINT('',#249046); +#249046 = CARTESIAN_POINT('',(207.518185,-47.362551,1.585)); +#249047 = LINE('',#249048,#249049); +#249048 = CARTESIAN_POINT('',(207.519626,-47.089585,1.585)); +#249049 = VECTOR('',#249050,1.); +#249050 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#249051 = ORIENTED_EDGE('',*,*,#249052,.T.); +#249052 = EDGE_CURVE('',#249045,#249053,#249055,.T.); +#249053 = VERTEX_POINT('',#249054); +#249054 = CARTESIAN_POINT('',(207.369626,-47.347919,1.585)); +#249055 = CIRCLE('',#249056,7.500006711463E-02); +#249056 = AXIS2_PLACEMENT_3D('',#249057,#249058,#249059); +#249057 = CARTESIAN_POINT('',(207.44462606711,-47.34791906711,1.585)); +#249058 = DIRECTION('',(-0.,0.,-1.)); +#249059 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#249060 = ORIENTED_EDGE('',*,*,#249061,.T.); +#249061 = EDGE_CURVE('',#249053,#249062,#249064,.T.); +#249062 = VERTEX_POINT('',#249063); +#249063 = CARTESIAN_POINT('',(207.369626,-47.089585,1.585)); +#249064 = LINE('',#249065,#249066); +#249065 = CARTESIAN_POINT('',(207.369626,-47.347919,1.585)); +#249066 = VECTOR('',#249067,1.); +#249067 = DIRECTION('',(0.,1.,0.)); +#249068 = ORIENTED_EDGE('',*,*,#249069,.T.); +#249069 = EDGE_CURVE('',#249062,#249070,#249072,.T.); +#249070 = VERTEX_POINT('',#249071); +#249071 = CARTESIAN_POINT('',(206.953804,-47.088144,1.585)); +#249072 = LINE('',#249073,#249074); +#249073 = CARTESIAN_POINT('',(207.369626,-47.089585,1.585)); +#249074 = VECTOR('',#249075,1.); +#249075 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#249076 = ORIENTED_EDGE('',*,*,#249077,.T.); +#249077 = EDGE_CURVE('',#249070,#249078,#249080,.T.); +#249078 = VERTEX_POINT('',#249079); +#249079 = CARTESIAN_POINT('',(206.897285,-46.990868,1.585)); +#249080 = CIRCLE('',#249081,7.499997045037E-02); +#249081 = AXIS2_PLACEMENT_3D('',#249082,#249083,#249084); +#249082 = CARTESIAN_POINT('',(206.96843617257,-47.01458521335,1.585)); +#249083 = DIRECTION('',(0.,0.,-1.)); +#249084 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#249085 = ORIENTED_EDGE('',*,*,#249086,.T.); +#249086 = EDGE_CURVE('',#249078,#249087,#249089,.T.); +#249087 = VERTEX_POINT('',#249088); +#249088 = CARTESIAN_POINT('',(207.141374,-46.263158,1.585)); +#249089 = LINE('',#249090,#249091); +#249090 = CARTESIAN_POINT('',(206.897285,-46.990868,1.585)); +#249091 = VECTOR('',#249092,1.); +#249092 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#249093 = ORIENTED_EDGE('',*,*,#249094,.T.); +#249094 = EDGE_CURVE('',#249087,#248968,#249095,.T.); +#249095 = LINE('',#249096,#249097); +#249096 = CARTESIAN_POINT('',(207.141374,-46.263158,1.585)); +#249097 = VECTOR('',#249098,1.); +#249098 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#249099 = PLANE('',#249100); +#249100 = AXIS2_PLACEMENT_3D('',#249101,#249102,#249103); +#249101 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249102 = DIRECTION('',(0.,0.,1.)); +#249103 = DIRECTION('',(1.,0.,-0.)); +#249104 = SHELL_BASED_SURFACE_MODEL('',(#249105)); +#249105 = OPEN_SHELL('',(#249106)); +#249106 = ADVANCED_FACE('',(#249107),#249337,.T.); +#249107 = FACE_BOUND('',#249108,.F.); +#249108 = EDGE_LOOP('',(#249109,#249120,#249128,#249136,#249144,#249152, + #249160,#249168,#249177,#249185,#249193,#249201,#249209,#249217, + #249225,#249233,#249241,#249249,#249257,#249265,#249273,#249281, + #249289,#249297,#249306,#249314,#249323,#249331)); +#249109 = ORIENTED_EDGE('',*,*,#249110,.T.); +#249110 = EDGE_CURVE('',#249111,#249113,#249115,.T.); +#249111 = VERTEX_POINT('',#249112); +#249112 = CARTESIAN_POINT('',(176.987465,-46.484243,1.585)); +#249113 = VERTEX_POINT('',#249114); +#249114 = CARTESIAN_POINT('',(177.235646,-46.240017,1.585)); +#249115 = CIRCLE('',#249116,0.3486213829); +#249116 = AXIS2_PLACEMENT_3D('',#249117,#249118,#249119); +#249117 = CARTESIAN_POINT('',(177.32340622951,-46.57741144383,1.585)); +#249118 = DIRECTION('',(0.,0.,-1.)); +#249119 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#249120 = ORIENTED_EDGE('',*,*,#249121,.T.); +#249121 = EDGE_CURVE('',#249113,#249122,#249124,.T.); +#249122 = VERTEX_POINT('',#249123); +#249123 = CARTESIAN_POINT('',(177.411726,-46.240017,1.585)); +#249124 = LINE('',#249125,#249126); +#249125 = CARTESIAN_POINT('',(177.235646,-46.240017,1.585)); +#249126 = VECTOR('',#249127,1.); +#249127 = DIRECTION('',(1.,0.,0.)); +#249128 = ORIENTED_EDGE('',*,*,#249129,.T.); +#249129 = EDGE_CURVE('',#249122,#249130,#249132,.T.); +#249130 = VERTEX_POINT('',#249131); +#249131 = CARTESIAN_POINT('',(177.398132,-46.272836,1.585)); +#249132 = LINE('',#249133,#249134); +#249133 = CARTESIAN_POINT('',(177.411726,-46.240017,1.585)); +#249134 = VECTOR('',#249135,1.); +#249135 = DIRECTION('',(-0.382681632568,-0.92388027801,0.)); +#249136 = ORIENTED_EDGE('',*,*,#249137,.T.); +#249137 = EDGE_CURVE('',#249130,#249138,#249140,.T.); +#249138 = VERTEX_POINT('',#249139); +#249139 = CARTESIAN_POINT('',(177.398132,-46.331364,1.585)); +#249140 = LINE('',#249141,#249142); +#249141 = CARTESIAN_POINT('',(177.398132,-46.272836,1.585)); +#249142 = VECTOR('',#249143,1.); +#249143 = DIRECTION('',(0.,-1.,0.)); +#249144 = ORIENTED_EDGE('',*,*,#249145,.T.); +#249145 = EDGE_CURVE('',#249138,#249146,#249148,.T.); +#249146 = VERTEX_POINT('',#249147); +#249147 = CARTESIAN_POINT('',(177.42053,-46.385436,1.585)); +#249148 = LINE('',#249149,#249150); +#249149 = CARTESIAN_POINT('',(177.398132,-46.331364,1.585)); +#249150 = VECTOR('',#249151,1.); +#249151 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#249152 = ORIENTED_EDGE('',*,*,#249153,.T.); +#249153 = EDGE_CURVE('',#249146,#249154,#249156,.T.); +#249154 = VERTEX_POINT('',#249155); +#249155 = CARTESIAN_POINT('',(177.42367,-46.388576,1.585)); +#249156 = LINE('',#249157,#249158); +#249157 = CARTESIAN_POINT('',(177.42053,-46.385436,1.585)); +#249158 = VECTOR('',#249159,1.); +#249159 = DIRECTION('',(0.707106781183,-0.70710678119,0.)); +#249160 = ORIENTED_EDGE('',*,*,#249161,.T.); +#249161 = EDGE_CURVE('',#249154,#249162,#249164,.T.); +#249162 = VERTEX_POINT('',#249163); +#249163 = CARTESIAN_POINT('',(177.267983,-46.388576,1.585)); +#249164 = LINE('',#249165,#249166); +#249165 = CARTESIAN_POINT('',(177.42367,-46.388576,1.585)); +#249166 = VECTOR('',#249167,1.); +#249167 = DIRECTION('',(-1.,0.,0.)); +#249168 = ORIENTED_EDGE('',*,*,#249169,.T.); +#249169 = EDGE_CURVE('',#249162,#249170,#249172,.T.); +#249170 = VERTEX_POINT('',#249171); +#249171 = CARTESIAN_POINT('',(177.134802,-46.521757,1.585)); +#249172 = CIRCLE('',#249173,0.18686440374); +#249173 = AXIS2_PLACEMENT_3D('',#249174,#249175,#249176); +#249174 = CARTESIAN_POINT('',(177.315519,-46.569293,1.585)); +#249175 = DIRECTION('',(0.,0.,1.)); +#249176 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#249177 = ORIENTED_EDGE('',*,*,#249178,.T.); +#249178 = EDGE_CURVE('',#249170,#249179,#249181,.T.); +#249179 = VERTEX_POINT('',#249180); +#249180 = CARTESIAN_POINT('',(177.134802,-46.676823,1.585)); +#249181 = LINE('',#249182,#249183); +#249182 = CARTESIAN_POINT('',(177.134802,-46.521757,1.585)); +#249183 = VECTOR('',#249184,1.); +#249184 = DIRECTION('',(0.,-1.,0.)); +#249185 = ORIENTED_EDGE('',*,*,#249186,.T.); +#249186 = EDGE_CURVE('',#249179,#249187,#249189,.T.); +#249187 = VERTEX_POINT('',#249188); +#249188 = CARTESIAN_POINT('',(177.153773,-46.714766,1.585)); +#249189 = LINE('',#249190,#249191); +#249190 = CARTESIAN_POINT('',(177.134802,-46.676823,1.585)); +#249191 = VECTOR('',#249192,1.); +#249192 = DIRECTION('',(0.447204166258,-0.894431905559,0.)); +#249193 = ORIENTED_EDGE('',*,*,#249194,.T.); +#249194 = EDGE_CURVE('',#249187,#249195,#249197,.T.); +#249195 = VERTEX_POINT('',#249196); +#249196 = CARTESIAN_POINT('',(177.632498,-46.714766,1.585)); +#249197 = LINE('',#249198,#249199); +#249198 = CARTESIAN_POINT('',(177.153773,-46.714766,1.585)); +#249199 = VECTOR('',#249200,1.); +#249200 = DIRECTION('',(1.,0.,0.)); +#249201 = ORIENTED_EDGE('',*,*,#249202,.T.); +#249202 = EDGE_CURVE('',#249195,#249203,#249205,.T.); +#249203 = VERTEX_POINT('',#249204); +#249204 = CARTESIAN_POINT('',(177.651469,-46.676823,1.585)); +#249205 = LINE('',#249206,#249207); +#249206 = CARTESIAN_POINT('',(177.632498,-46.714766,1.585)); +#249207 = VECTOR('',#249208,1.); +#249208 = DIRECTION('',(0.447204166258,0.894431905559,0.)); +#249209 = ORIENTED_EDGE('',*,*,#249210,.T.); +#249210 = EDGE_CURVE('',#249203,#249211,#249213,.T.); +#249211 = VERTEX_POINT('',#249212); +#249212 = CARTESIAN_POINT('',(177.651469,-46.521757,1.585)); +#249213 = LINE('',#249214,#249215); +#249214 = CARTESIAN_POINT('',(177.651469,-46.676823,1.585)); +#249215 = VECTOR('',#249216,1.); +#249216 = DIRECTION('',(0.,1.,0.)); +#249217 = ORIENTED_EDGE('',*,*,#249218,.T.); +#249218 = EDGE_CURVE('',#249211,#249219,#249221,.T.); +#249219 = VERTEX_POINT('',#249220); +#249220 = CARTESIAN_POINT('',(177.617211,-46.453241,1.585)); +#249221 = LINE('',#249222,#249223); +#249222 = CARTESIAN_POINT('',(177.651469,-46.521757,1.585)); +#249223 = VECTOR('',#249224,1.); +#249224 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#249225 = ORIENTED_EDGE('',*,*,#249226,.T.); +#249226 = EDGE_CURVE('',#249219,#249227,#249229,.T.); +#249227 = VERTEX_POINT('',#249228); +#249228 = CARTESIAN_POINT('',(177.60186,-46.43789,1.585)); +#249229 = LINE('',#249230,#249231); +#249230 = CARTESIAN_POINT('',(177.617211,-46.453241,1.585)); +#249231 = VECTOR('',#249232,1.); +#249232 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#249233 = ORIENTED_EDGE('',*,*,#249234,.T.); +#249234 = EDGE_CURVE('',#249227,#249235,#249237,.T.); +#249235 = VERTEX_POINT('',#249236); +#249236 = CARTESIAN_POINT('',(177.628586,-46.42682,1.585)); +#249237 = LINE('',#249238,#249239); +#249238 = CARTESIAN_POINT('',(177.60186,-46.43789,1.585)); +#249239 = VECTOR('',#249240,1.); +#249240 = DIRECTION('',(0.92388285277,0.382675416454,0.)); +#249241 = ORIENTED_EDGE('',*,*,#249242,.T.); +#249242 = EDGE_CURVE('',#249235,#249243,#249245,.T.); +#249243 = VERTEX_POINT('',#249244); +#249244 = CARTESIAN_POINT('',(177.66997,-46.385436,1.585)); +#249245 = LINE('',#249246,#249247); +#249246 = CARTESIAN_POINT('',(177.628586,-46.42682,1.585)); +#249247 = VECTOR('',#249248,1.); +#249248 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#249249 = ORIENTED_EDGE('',*,*,#249250,.T.); +#249250 = EDGE_CURVE('',#249243,#249251,#249253,.T.); +#249251 = VERTEX_POINT('',#249252); +#249252 = CARTESIAN_POINT('',(177.692368,-46.331364,1.585)); +#249253 = LINE('',#249254,#249255); +#249254 = CARTESIAN_POINT('',(177.66997,-46.385436,1.585)); +#249255 = VECTOR('',#249256,1.); +#249256 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249257 = ORIENTED_EDGE('',*,*,#249258,.T.); +#249258 = EDGE_CURVE('',#249251,#249259,#249261,.T.); +#249259 = VERTEX_POINT('',#249260); +#249260 = CARTESIAN_POINT('',(177.692368,-46.317751,1.585)); +#249261 = LINE('',#249262,#249263); +#249262 = CARTESIAN_POINT('',(177.692368,-46.331364,1.585)); +#249263 = VECTOR('',#249264,1.); +#249264 = DIRECTION('',(0.,1.,0.)); +#249265 = ORIENTED_EDGE('',*,*,#249266,.T.); +#249266 = EDGE_CURVE('',#249259,#249267,#249269,.T.); +#249267 = VERTEX_POINT('',#249268); +#249268 = CARTESIAN_POINT('',(177.741967,-46.368973,1.585)); +#249269 = LINE('',#249270,#249271); +#249270 = CARTESIAN_POINT('',(177.692368,-46.317751,1.585)); +#249271 = VECTOR('',#249272,1.); +#249272 = DIRECTION('',(0.695633764102,-0.71839659398,0.)); +#249273 = ORIENTED_EDGE('',*,*,#249274,.T.); +#249274 = EDGE_CURVE('',#249267,#249275,#249277,.T.); +#249275 = VERTEX_POINT('',#249276); +#249276 = CARTESIAN_POINT('',(177.800028,-46.48942,1.585)); +#249277 = LINE('',#249278,#249279); +#249278 = CARTESIAN_POINT('',(177.741967,-46.368973,1.585)); +#249279 = VECTOR('',#249280,1.); +#249280 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#249281 = ORIENTED_EDGE('',*,*,#249282,.T.); +#249282 = EDGE_CURVE('',#249275,#249283,#249285,.T.); +#249283 = VERTEX_POINT('',#249284); +#249284 = CARTESIAN_POINT('',(177.798642,-46.714766,1.585)); +#249285 = LINE('',#249286,#249287); +#249286 = CARTESIAN_POINT('',(177.800028,-46.48942,1.585)); +#249287 = VECTOR('',#249288,1.); +#249288 = DIRECTION('',(-6.150425501802E-03,-0.999981085954,0.)); +#249289 = ORIENTED_EDGE('',*,*,#249290,.T.); +#249290 = EDGE_CURVE('',#249283,#249291,#249293,.T.); +#249291 = VERTEX_POINT('',#249292); +#249292 = CARTESIAN_POINT('',(178.074434,-46.716207,1.585)); +#249293 = LINE('',#249294,#249295); +#249294 = CARTESIAN_POINT('',(177.798642,-46.714766,1.585)); +#249295 = VECTOR('',#249296,1.); +#249296 = DIRECTION('',(0.999986350217,-5.22488081838E-03,0.)); +#249297 = ORIENTED_EDGE('',*,*,#249298,.T.); +#249298 = EDGE_CURVE('',#249291,#249299,#249301,.T.); +#249299 = VERTEX_POINT('',#249300); +#249300 = CARTESIAN_POINT('',(178.059802,-46.864766,1.585)); +#249301 = CIRCLE('',#249302,7.500006711464E-02); +#249302 = AXIS2_PLACEMENT_3D('',#249303,#249304,#249305); +#249303 = CARTESIAN_POINT('',(178.05980206711,-46.78976593288,1.585)); +#249304 = DIRECTION('',(0.,0.,-1.)); +#249305 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#249306 = ORIENTED_EDGE('',*,*,#249307,.T.); +#249307 = EDGE_CURVE('',#249299,#249308,#249310,.T.); +#249308 = VERTEX_POINT('',#249309); +#249309 = CARTESIAN_POINT('',(177.04517,-46.863325,1.585)); +#249310 = LINE('',#249311,#249312); +#249311 = CARTESIAN_POINT('',(178.059802,-46.864766,1.585)); +#249312 = VECTOR('',#249313,1.); +#249313 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#249314 = ORIENTED_EDGE('',*,*,#249315,.T.); +#249315 = EDGE_CURVE('',#249308,#249316,#249318,.T.); +#249316 = VERTEX_POINT('',#249317); +#249317 = CARTESIAN_POINT('',(177.00097,-46.744569,1.585)); +#249318 = CIRCLE('',#249319,7.424728667613E-02); +#249319 = AXIS2_PLACEMENT_3D('',#249320,#249321,#249322); +#249320 = CARTESIAN_POINT('',(177.05934915462,-46.79044419901,1.585)); +#249321 = DIRECTION('',(0.,0.,-1.)); +#249322 = DIRECTION('',(-0.19097202414,-0.981595479816,-0.)); +#249323 = ORIENTED_EDGE('',*,*,#249324,.T.); +#249324 = EDGE_CURVE('',#249316,#249325,#249327,.T.); +#249325 = VERTEX_POINT('',#249326); +#249326 = CARTESIAN_POINT('',(176.986243,-46.70916,1.585)); +#249327 = LINE('',#249328,#249329); +#249328 = CARTESIAN_POINT('',(177.00097,-46.744569,1.585)); +#249329 = VECTOR('',#249330,1.); +#249330 = DIRECTION('',(-0.384020957699,0.923324376396,0.)); +#249331 = ORIENTED_EDGE('',*,*,#249332,.T.); +#249332 = EDGE_CURVE('',#249325,#249111,#249333,.T.); +#249333 = LINE('',#249334,#249335); +#249334 = CARTESIAN_POINT('',(176.986243,-46.70916,1.585)); +#249335 = VECTOR('',#249336,1.); +#249336 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#249337 = PLANE('',#249338); +#249338 = AXIS2_PLACEMENT_3D('',#249339,#249340,#249341); +#249339 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249340 = DIRECTION('',(0.,0.,1.)); +#249341 = DIRECTION('',(1.,0.,-0.)); +#249342 = SHELL_BASED_SURFACE_MODEL('',(#249343)); +#249343 = OPEN_SHELL('',(#249344)); +#249344 = ADVANCED_FACE('',(#249345),#249530,.T.); +#249345 = FACE_BOUND('',#249346,.F.); +#249346 = EDGE_LOOP('',(#249347,#249358,#249366,#249375,#249383,#249392, + #249400,#249408,#249416,#249425,#249433,#249442,#249450,#249459, + #249467,#249475,#249483,#249491,#249499,#249507,#249515,#249524)); +#249347 = ORIENTED_EDGE('',*,*,#249348,.T.); +#249348 = EDGE_CURVE('',#249349,#249351,#249353,.T.); +#249349 = VERTEX_POINT('',#249350); +#249350 = CARTESIAN_POINT('',(163.808389,-46.030497,1.585)); +#249351 = VERTEX_POINT('',#249352); +#249352 = CARTESIAN_POINT('',(163.90309,-46.14589,1.585)); +#249353 = CIRCLE('',#249354,7.500003178656E-02); +#249354 = AXIS2_PLACEMENT_3D('',#249355,#249356,#249357); +#249355 = CARTESIAN_POINT('',(163.8500565,-46.09285743787,1.585)); +#249356 = DIRECTION('',(0.,0.,-1.)); +#249357 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#249358 = ORIENTED_EDGE('',*,*,#249359,.T.); +#249359 = EDGE_CURVE('',#249351,#249360,#249362,.T.); +#249360 = VERTEX_POINT('',#249361); +#249361 = CARTESIAN_POINT('',(163.86799,-46.180989,1.585)); +#249362 = LINE('',#249363,#249364); +#249363 = CARTESIAN_POINT('',(163.90309,-46.14589,1.585)); +#249364 = VECTOR('',#249365,1.); +#249365 = DIRECTION('',(-0.707116854005,-0.707096708225,0.)); +#249366 = ORIENTED_EDGE('',*,*,#249367,.T.); +#249367 = EDGE_CURVE('',#249360,#249368,#249370,.T.); +#249368 = VERTEX_POINT('',#249369); +#249369 = CARTESIAN_POINT('',(163.86799,-46.480914,1.585)); +#249370 = CIRCLE('',#249371,0.299310989749); +#249371 = AXIS2_PLACEMENT_3D('',#249372,#249373,#249374); +#249372 = CARTESIAN_POINT('',(164.12702342868,-46.3309515,1.585)); +#249373 = DIRECTION('',(0.,0.,1.)); +#249374 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#249375 = ORIENTED_EDGE('',*,*,#249376,.T.); +#249376 = EDGE_CURVE('',#249368,#249377,#249379,.T.); +#249377 = VERTEX_POINT('',#249378); +#249378 = CARTESIAN_POINT('',(163.942103,-46.555027,1.585)); +#249379 = LINE('',#249380,#249381); +#249380 = CARTESIAN_POINT('',(163.86799,-46.480914,1.585)); +#249381 = VECTOR('',#249382,1.); +#249382 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#249383 = ORIENTED_EDGE('',*,*,#249384,.T.); +#249384 = EDGE_CURVE('',#249377,#249385,#249387,.T.); +#249385 = VERTEX_POINT('',#249386); +#249386 = CARTESIAN_POINT('',(164.317013,-46.636904,1.585)); +#249387 = CIRCLE('',#249388,0.611738044646); +#249388 = AXIS2_PLACEMENT_3D('',#249389,#249390,#249391); +#249389 = CARTESIAN_POINT('',(164.25349337395,-46.02847266256,1.585)); +#249390 = DIRECTION('',(0.,0.,1.)); +#249391 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#249392 = ORIENTED_EDGE('',*,*,#249393,.T.); +#249393 = EDGE_CURVE('',#249385,#249394,#249396,.T.); +#249394 = VERTEX_POINT('',#249395); +#249395 = CARTESIAN_POINT('',(164.490547,-46.59352,1.585)); +#249396 = LINE('',#249397,#249398); +#249397 = CARTESIAN_POINT('',(164.317013,-46.636904,1.585)); +#249398 = VECTOR('',#249399,1.); +#249399 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#249400 = ORIENTED_EDGE('',*,*,#249401,.T.); +#249401 = EDGE_CURVE('',#249394,#249402,#249404,.T.); +#249402 = VERTEX_POINT('',#249403); +#249403 = CARTESIAN_POINT('',(164.567534,-46.555026,1.585)); +#249404 = LINE('',#249405,#249406); +#249405 = CARTESIAN_POINT('',(164.490547,-46.59352,1.585)); +#249406 = VECTOR('',#249407,1.); +#249407 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#249408 = ORIENTED_EDGE('',*,*,#249409,.T.); +#249409 = EDGE_CURVE('',#249402,#249410,#249412,.T.); +#249410 = VERTEX_POINT('',#249411); +#249411 = CARTESIAN_POINT('',(164.641648,-46.480913,1.585)); +#249412 = LINE('',#249413,#249414); +#249413 = CARTESIAN_POINT('',(164.567534,-46.555026,1.585)); +#249414 = VECTOR('',#249415,1.); +#249415 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#249416 = ORIENTED_EDGE('',*,*,#249417,.T.); +#249417 = EDGE_CURVE('',#249410,#249418,#249420,.T.); +#249418 = VERTEX_POINT('',#249419); +#249419 = CARTESIAN_POINT('',(164.641648,-46.18099,1.585)); +#249420 = CIRCLE('',#249421,0.299306284995); +#249421 = AXIS2_PLACEMENT_3D('',#249422,#249423,#249424); +#249422 = CARTESIAN_POINT('',(164.38261942868,-46.3309515,1.585)); +#249423 = DIRECTION('',(0.,-0.,1.)); +#249424 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#249425 = ORIENTED_EDGE('',*,*,#249426,.T.); +#249426 = EDGE_CURVE('',#249418,#249427,#249429,.T.); +#249427 = VERTEX_POINT('',#249428); +#249428 = CARTESIAN_POINT('',(164.59722,-46.134525,1.585)); +#249429 = LINE('',#249430,#249431); +#249430 = CARTESIAN_POINT('',(164.641648,-46.18099,1.585)); +#249431 = VECTOR('',#249432,1.); +#249432 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#249433 = ORIENTED_EDGE('',*,*,#249434,.T.); +#249434 = EDGE_CURVE('',#249427,#249435,#249437,.T.); +#249435 = VERTEX_POINT('',#249436); +#249436 = CARTESIAN_POINT('',(164.712612,-46.039823,1.585)); +#249437 = CIRCLE('',#249438,7.499993690527E-02); +#249438 = AXIS2_PLACEMENT_3D('',#249439,#249440,#249441); +#249439 = CARTESIAN_POINT('',(164.65957982375,-46.09285675169,1.585)); +#249440 = DIRECTION('',(0.,0.,-1.)); +#249441 = DIRECTION('',(-0.831465016204,-0.555577111505,-0.)); +#249442 = ORIENTED_EDGE('',*,*,#249443,.T.); +#249443 = EDGE_CURVE('',#249435,#249444,#249446,.T.); +#249444 = VERTEX_POINT('',#249445); +#249445 = CARTESIAN_POINT('',(164.772357,-46.103333,1.585)); +#249446 = LINE('',#249447,#249448); +#249447 = CARTESIAN_POINT('',(164.712612,-46.039823,1.585)); +#249448 = VECTOR('',#249449,1.); +#249449 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#249450 = ORIENTED_EDGE('',*,*,#249451,.T.); +#249451 = EDGE_CURVE('',#249444,#249452,#249454,.T.); +#249452 = VERTEX_POINT('',#249453); +#249453 = CARTESIAN_POINT('',(164.769561,-46.563096,1.585)); +#249454 = CIRCLE('',#249455,0.461068563462); +#249455 = AXIS2_PLACEMENT_3D('',#249456,#249457,#249458); +#249456 = CARTESIAN_POINT('',(164.37129557362,-46.33078398919,1.585)); +#249457 = DIRECTION('',(0.,0.,-1.)); +#249458 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#249459 = ORIENTED_EDGE('',*,*,#249460,.T.); +#249460 = EDGE_CURVE('',#249452,#249461,#249463,.T.); +#249461 = VERTEX_POINT('',#249462); +#249462 = CARTESIAN_POINT('',(164.651798,-46.679784,1.585)); +#249463 = LINE('',#249464,#249465); +#249464 = CARTESIAN_POINT('',(164.769561,-46.563096,1.585)); +#249465 = VECTOR('',#249466,1.); +#249466 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#249467 = ORIENTED_EDGE('',*,*,#249468,.T.); +#249468 = EDGE_CURVE('',#249461,#249469,#249471,.T.); +#249469 = VERTEX_POINT('',#249470); +#249470 = CARTESIAN_POINT('',(164.534913,-46.737046,1.585)); +#249471 = LINE('',#249472,#249473); +#249472 = CARTESIAN_POINT('',(164.651798,-46.679784,1.585)); +#249473 = VECTOR('',#249474,1.); +#249474 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#249475 = ORIENTED_EDGE('',*,*,#249476,.T.); +#249476 = EDGE_CURVE('',#249469,#249477,#249479,.T.); +#249477 = VERTEX_POINT('',#249478); +#249478 = CARTESIAN_POINT('',(164.326247,-46.786904,1.585)); +#249479 = LINE('',#249480,#249481); +#249480 = CARTESIAN_POINT('',(164.534913,-46.737046,1.585)); +#249481 = VECTOR('',#249482,1.); +#249482 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#249483 = ORIENTED_EDGE('',*,*,#249484,.T.); +#249484 = EDGE_CURVE('',#249477,#249485,#249487,.T.); +#249485 = VERTEX_POINT('',#249486); +#249486 = CARTESIAN_POINT('',(164.1652,-46.784665,1.585)); +#249487 = LINE('',#249488,#249489); +#249488 = CARTESIAN_POINT('',(164.326247,-46.786904,1.585)); +#249489 = VECTOR('',#249490,1.); +#249490 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#249491 = ORIENTED_EDGE('',*,*,#249492,.T.); +#249492 = EDGE_CURVE('',#249485,#249493,#249495,.T.); +#249493 = VERTEX_POINT('',#249494); +#249494 = CARTESIAN_POINT('',(163.959373,-46.731367,1.585)); +#249495 = LINE('',#249496,#249497); +#249496 = CARTESIAN_POINT('',(164.1652,-46.784665,1.585)); +#249497 = VECTOR('',#249498,1.); +#249498 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#249499 = ORIENTED_EDGE('',*,*,#249500,.T.); +#249500 = EDGE_CURVE('',#249493,#249501,#249503,.T.); +#249501 = VERTEX_POINT('',#249502); +#249502 = CARTESIAN_POINT('',(163.850393,-46.674419,1.585)); +#249503 = LINE('',#249504,#249505); +#249504 = CARTESIAN_POINT('',(163.959373,-46.731367,1.585)); +#249505 = VECTOR('',#249506,1.); +#249506 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#249507 = ORIENTED_EDGE('',*,*,#249508,.T.); +#249508 = EDGE_CURVE('',#249501,#249509,#249511,.T.); +#249509 = VERTEX_POINT('',#249510); +#249510 = CARTESIAN_POINT('',(163.737281,-46.55857,1.585)); +#249511 = LINE('',#249512,#249513); +#249512 = CARTESIAN_POINT('',(163.850393,-46.674419,1.585)); +#249513 = VECTOR('',#249514,1.); +#249514 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#249515 = ORIENTED_EDGE('',*,*,#249516,.T.); +#249516 = EDGE_CURVE('',#249509,#249517,#249519,.T.); +#249517 = VERTEX_POINT('',#249518); +#249518 = CARTESIAN_POINT('',(163.740078,-46.098808,1.585)); +#249519 = CIRCLE('',#249520,0.461058290907); +#249520 = AXIS2_PLACEMENT_3D('',#249521,#249522,#249523); +#249521 = CARTESIAN_POINT('',(164.13833135644,-46.33112031499,1.585)); +#249522 = DIRECTION('',(0.,0.,-1.)); +#249523 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#249524 = ORIENTED_EDGE('',*,*,#249525,.T.); +#249525 = EDGE_CURVE('',#249517,#249349,#249526,.T.); +#249526 = LINE('',#249527,#249528); +#249527 = CARTESIAN_POINT('',(163.740078,-46.098808,1.585)); +#249528 = VECTOR('',#249529,1.); +#249529 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#249530 = PLANE('',#249531); +#249531 = AXIS2_PLACEMENT_3D('',#249532,#249533,#249534); +#249532 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249533 = DIRECTION('',(0.,0.,1.)); +#249534 = DIRECTION('',(1.,0.,-0.)); +#249535 = SHELL_BASED_SURFACE_MODEL('',(#249536)); +#249536 = OPEN_SHELL('',(#249537)); +#249537 = ADVANCED_FACE('',(#249538),#249599,.T.); +#249538 = FACE_BOUND('',#249539,.F.); +#249539 = EDGE_LOOP('',(#249540,#249551,#249559,#249568,#249576,#249584, + #249593)); +#249540 = ORIENTED_EDGE('',*,*,#249541,.T.); +#249541 = EDGE_CURVE('',#249542,#249544,#249546,.T.); +#249542 = VERTEX_POINT('',#249543); +#249543 = CARTESIAN_POINT('',(109.75165,-44.9431,1.585)); +#249544 = VERTEX_POINT('',#249545); +#249545 = CARTESIAN_POINT('',(109.81165,-44.8831,1.585)); +#249546 = CIRCLE('',#249547,5.999932016262E-02); +#249547 = AXIS2_PLACEMENT_3D('',#249548,#249549,#249550); +#249548 = CARTESIAN_POINT('',(109.81164932015,-44.94309932015,1.585)); +#249549 = DIRECTION('',(0.,0.,-1.)); +#249550 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#249551 = ORIENTED_EDGE('',*,*,#249552,.T.); +#249552 = EDGE_CURVE('',#249544,#249553,#249555,.T.); +#249553 = VERTEX_POINT('',#249554); +#249554 = CARTESIAN_POINT('',(111.19165,-44.8831,1.585)); +#249555 = LINE('',#249556,#249557); +#249556 = CARTESIAN_POINT('',(109.81165,-44.8831,1.585)); +#249557 = VECTOR('',#249558,1.); +#249558 = DIRECTION('',(1.,0.,0.)); +#249559 = ORIENTED_EDGE('',*,*,#249560,.T.); +#249560 = EDGE_CURVE('',#249553,#249561,#249563,.T.); +#249561 = VERTEX_POINT('',#249562); +#249562 = CARTESIAN_POINT('',(111.19165,-45.0031,1.585)); +#249563 = CIRCLE('',#249564,6.000000000043E-02); +#249564 = AXIS2_PLACEMENT_3D('',#249565,#249566,#249567); +#249565 = CARTESIAN_POINT('',(111.19165022558,-44.9431,1.585)); +#249566 = DIRECTION('',(0.,0.,-1.)); +#249567 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#249568 = ORIENTED_EDGE('',*,*,#249569,.T.); +#249569 = EDGE_CURVE('',#249561,#249570,#249572,.T.); +#249570 = VERTEX_POINT('',#249571); +#249571 = CARTESIAN_POINT('',(109.87165,-45.0031,1.585)); +#249572 = LINE('',#249573,#249574); +#249573 = CARTESIAN_POINT('',(111.19165,-45.0031,1.585)); +#249574 = VECTOR('',#249575,1.); +#249575 = DIRECTION('',(-1.,0.,0.)); +#249576 = ORIENTED_EDGE('',*,*,#249577,.T.); +#249577 = EDGE_CURVE('',#249570,#249578,#249580,.T.); +#249578 = VERTEX_POINT('',#249579); +#249579 = CARTESIAN_POINT('',(109.87165,-46.3231,1.585)); +#249580 = LINE('',#249581,#249582); +#249581 = CARTESIAN_POINT('',(109.87165,-45.0031,1.585)); +#249582 = VECTOR('',#249583,1.); +#249583 = DIRECTION('',(0.,-1.,0.)); +#249584 = ORIENTED_EDGE('',*,*,#249585,.T.); +#249585 = EDGE_CURVE('',#249578,#249586,#249588,.T.); +#249586 = VERTEX_POINT('',#249587); +#249587 = CARTESIAN_POINT('',(109.75165,-46.3231,1.585)); +#249588 = CIRCLE('',#249589,6.000000000043E-02); +#249589 = AXIS2_PLACEMENT_3D('',#249590,#249591,#249592); +#249590 = CARTESIAN_POINT('',(109.81165,-46.32310022558,1.585)); +#249591 = DIRECTION('',(0.,0.,-1.)); +#249592 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#249593 = ORIENTED_EDGE('',*,*,#249594,.T.); +#249594 = EDGE_CURVE('',#249586,#249542,#249595,.T.); +#249595 = LINE('',#249596,#249597); +#249596 = CARTESIAN_POINT('',(109.75165,-46.3231,1.585)); +#249597 = VECTOR('',#249598,1.); +#249598 = DIRECTION('',(0.,1.,0.)); +#249599 = PLANE('',#249600); +#249600 = AXIS2_PLACEMENT_3D('',#249601,#249602,#249603); +#249601 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249602 = DIRECTION('',(0.,0.,1.)); +#249603 = DIRECTION('',(1.,0.,-0.)); +#249604 = SHELL_BASED_SURFACE_MODEL('',(#249605)); +#249605 = OPEN_SHELL('',(#249606)); +#249606 = ADVANCED_FACE('',(#249607),#249651,.T.); +#249607 = FACE_BOUND('',#249608,.F.); +#249608 = EDGE_LOOP('',(#249609,#249620,#249628,#249637,#249645)); +#249609 = ORIENTED_EDGE('',*,*,#249610,.T.); +#249610 = EDGE_CURVE('',#249611,#249613,#249615,.T.); +#249611 = VERTEX_POINT('',#249612); +#249612 = CARTESIAN_POINT('',(160.276217,-44.563887,1.585)); +#249613 = VERTEX_POINT('',#249614); +#249614 = CARTESIAN_POINT('',(160.39165,-44.586848,1.585)); +#249615 = CIRCLE('',#249616,6.000007318647E-02); +#249616 = AXIS2_PLACEMENT_3D('',#249617,#249618,#249619); +#249617 = CARTESIAN_POINT('',(160.33164992681,-44.58684782331,1.585)); +#249618 = DIRECTION('',(0.,0.,-1.)); +#249619 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#249620 = ORIENTED_EDGE('',*,*,#249621,.T.); +#249621 = EDGE_CURVE('',#249613,#249622,#249624,.T.); +#249622 = VERTEX_POINT('',#249623); +#249623 = CARTESIAN_POINT('',(160.39165,-46.009352,1.585)); +#249624 = LINE('',#249625,#249626); +#249625 = CARTESIAN_POINT('',(160.39165,-44.586848,1.585)); +#249626 = VECTOR('',#249627,1.); +#249627 = DIRECTION('',(0.,-1.,0.)); +#249628 = ORIENTED_EDGE('',*,*,#249629,.T.); +#249629 = EDGE_CURVE('',#249622,#249630,#249632,.T.); +#249630 = VERTEX_POINT('',#249631); +#249631 = CARTESIAN_POINT('',(160.27165,-46.009352,1.585)); +#249632 = CIRCLE('',#249633,6.000000000042E-02); +#249633 = AXIS2_PLACEMENT_3D('',#249634,#249635,#249636); +#249634 = CARTESIAN_POINT('',(160.33165,-46.00935222558,1.585)); +#249635 = DIRECTION('',(0.,0.,-1.)); +#249636 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#249637 = ORIENTED_EDGE('',*,*,#249638,.T.); +#249638 = EDGE_CURVE('',#249630,#249639,#249641,.T.); +#249639 = VERTEX_POINT('',#249640); +#249640 = CARTESIAN_POINT('',(160.27165,-44.586848,1.585)); +#249641 = LINE('',#249642,#249643); +#249642 = CARTESIAN_POINT('',(160.27165,-46.009352,1.585)); +#249643 = VECTOR('',#249644,1.); +#249644 = DIRECTION('',(0.,1.,0.)); +#249645 = ORIENTED_EDGE('',*,*,#249646,.T.); +#249646 = EDGE_CURVE('',#249639,#249611,#249647,.T.); +#249647 = LINE('',#249648,#249649); +#249648 = CARTESIAN_POINT('',(160.27165,-44.586848,1.585)); +#249649 = VECTOR('',#249650,1.); +#249650 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#249651 = PLANE('',#249652); +#249652 = AXIS2_PLACEMENT_3D('',#249653,#249654,#249655); +#249653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249654 = DIRECTION('',(0.,0.,1.)); +#249655 = DIRECTION('',(1.,0.,-0.)); +#249656 = SHELL_BASED_SURFACE_MODEL('',(#249657)); +#249657 = OPEN_SHELL('',(#249658)); +#249658 = ADVANCED_FACE('',(#249659),#249703,.T.); +#249659 = FACE_BOUND('',#249660,.F.); +#249660 = EDGE_LOOP('',(#249661,#249672,#249680,#249689,#249697)); +#249661 = ORIENTED_EDGE('',*,*,#249662,.T.); +#249662 = EDGE_CURVE('',#249663,#249665,#249667,.T.); +#249663 = VERTEX_POINT('',#249664); +#249664 = CARTESIAN_POINT('',(162.996217,-44.563887,1.585)); +#249665 = VERTEX_POINT('',#249666); +#249666 = CARTESIAN_POINT('',(163.11165,-44.586848,1.585)); +#249667 = CIRCLE('',#249668,6.000007318647E-02); +#249668 = AXIS2_PLACEMENT_3D('',#249669,#249670,#249671); +#249669 = CARTESIAN_POINT('',(163.05164992681,-44.58684782331,1.585)); +#249670 = DIRECTION('',(0.,0.,-1.)); +#249671 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#249672 = ORIENTED_EDGE('',*,*,#249673,.T.); +#249673 = EDGE_CURVE('',#249665,#249674,#249676,.T.); +#249674 = VERTEX_POINT('',#249675); +#249675 = CARTESIAN_POINT('',(163.11165,-46.009352,1.585)); +#249676 = LINE('',#249677,#249678); +#249677 = CARTESIAN_POINT('',(163.11165,-44.586848,1.585)); +#249678 = VECTOR('',#249679,1.); +#249679 = DIRECTION('',(0.,-1.,0.)); +#249680 = ORIENTED_EDGE('',*,*,#249681,.T.); +#249681 = EDGE_CURVE('',#249674,#249682,#249684,.T.); +#249682 = VERTEX_POINT('',#249683); +#249683 = CARTESIAN_POINT('',(162.99165,-46.009352,1.585)); +#249684 = CIRCLE('',#249685,6.000000000042E-02); +#249685 = AXIS2_PLACEMENT_3D('',#249686,#249687,#249688); +#249686 = CARTESIAN_POINT('',(163.05165,-46.00935222558,1.585)); +#249687 = DIRECTION('',(0.,0.,-1.)); +#249688 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#249689 = ORIENTED_EDGE('',*,*,#249690,.T.); +#249690 = EDGE_CURVE('',#249682,#249691,#249693,.T.); +#249691 = VERTEX_POINT('',#249692); +#249692 = CARTESIAN_POINT('',(162.99165,-44.586848,1.585)); +#249693 = LINE('',#249694,#249695); +#249694 = CARTESIAN_POINT('',(162.99165,-46.009352,1.585)); +#249695 = VECTOR('',#249696,1.); +#249696 = DIRECTION('',(0.,1.,0.)); +#249697 = ORIENTED_EDGE('',*,*,#249698,.T.); +#249698 = EDGE_CURVE('',#249691,#249663,#249699,.T.); +#249699 = LINE('',#249700,#249701); +#249700 = CARTESIAN_POINT('',(162.99165,-44.586848,1.585)); +#249701 = VECTOR('',#249702,1.); +#249702 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#249703 = PLANE('',#249704); +#249704 = AXIS2_PLACEMENT_3D('',#249705,#249706,#249707); +#249705 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249706 = DIRECTION('',(0.,0.,1.)); +#249707 = DIRECTION('',(1.,0.,-0.)); +#249708 = SHELL_BASED_SURFACE_MODEL('',(#249709)); +#249709 = OPEN_SHELL('',(#249710)); +#249710 = ADVANCED_FACE('',(#249711),#249747,.T.); +#249711 = FACE_BOUND('',#249712,.F.); +#249712 = EDGE_LOOP('',(#249713,#249724,#249732,#249741)); +#249713 = ORIENTED_EDGE('',*,*,#249714,.T.); +#249714 = EDGE_CURVE('',#249715,#249717,#249719,.T.); +#249715 = VERTEX_POINT('',#249716); +#249716 = CARTESIAN_POINT('',(173.629392,-45.9056,1.585)); +#249717 = VERTEX_POINT('',#249718); +#249718 = CARTESIAN_POINT('',(173.629392,-45.7856,1.585)); +#249719 = CIRCLE('',#249720,6.000000000042E-02); +#249720 = AXIS2_PLACEMENT_3D('',#249721,#249722,#249723); +#249721 = CARTESIAN_POINT('',(173.62939177441,-45.8456,1.585)); +#249722 = DIRECTION('',(0.,0.,-1.)); +#249723 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#249724 = ORIENTED_EDGE('',*,*,#249725,.T.); +#249725 = EDGE_CURVE('',#249717,#249726,#249728,.T.); +#249726 = VERTEX_POINT('',#249727); +#249727 = CARTESIAN_POINT('',(174.103908,-45.7856,1.585)); +#249728 = LINE('',#249729,#249730); +#249729 = CARTESIAN_POINT('',(173.629392,-45.7856,1.585)); +#249730 = VECTOR('',#249731,1.); +#249731 = DIRECTION('',(1.,0.,0.)); +#249732 = ORIENTED_EDGE('',*,*,#249733,.T.); +#249733 = EDGE_CURVE('',#249726,#249734,#249736,.T.); +#249734 = VERTEX_POINT('',#249735); +#249735 = CARTESIAN_POINT('',(174.103908,-45.9056,1.585)); +#249736 = CIRCLE('',#249737,6.000000000043E-02); +#249737 = AXIS2_PLACEMENT_3D('',#249738,#249739,#249740); +#249738 = CARTESIAN_POINT('',(174.10390822558,-45.8456,1.585)); +#249739 = DIRECTION('',(0.,0.,-1.)); +#249740 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#249741 = ORIENTED_EDGE('',*,*,#249742,.T.); +#249742 = EDGE_CURVE('',#249734,#249715,#249743,.T.); +#249743 = LINE('',#249744,#249745); +#249744 = CARTESIAN_POINT('',(174.103908,-45.9056,1.585)); +#249745 = VECTOR('',#249746,1.); +#249746 = DIRECTION('',(-1.,0.,0.)); +#249747 = PLANE('',#249748); +#249748 = AXIS2_PLACEMENT_3D('',#249749,#249750,#249751); +#249749 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249750 = DIRECTION('',(0.,0.,1.)); +#249751 = DIRECTION('',(1.,0.,-0.)); +#249752 = SHELL_BASED_SURFACE_MODEL('',(#249753)); +#249753 = OPEN_SHELL('',(#249754)); +#249754 = ADVANCED_FACE('',(#249755),#249791,.T.); +#249755 = FACE_BOUND('',#249756,.F.); +#249756 = EDGE_LOOP('',(#249757,#249768,#249776,#249785)); +#249757 = ORIENTED_EDGE('',*,*,#249758,.T.); +#249758 = EDGE_CURVE('',#249759,#249761,#249763,.T.); +#249759 = VERTEX_POINT('',#249760); +#249760 = CARTESIAN_POINT('',(176.854392,-45.9056,1.585)); +#249761 = VERTEX_POINT('',#249762); +#249762 = CARTESIAN_POINT('',(176.854392,-45.7856,1.585)); +#249763 = CIRCLE('',#249764,6.000000000042E-02); +#249764 = AXIS2_PLACEMENT_3D('',#249765,#249766,#249767); +#249765 = CARTESIAN_POINT('',(176.85439177441,-45.8456,1.585)); +#249766 = DIRECTION('',(0.,0.,-1.)); +#249767 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#249768 = ORIENTED_EDGE('',*,*,#249769,.T.); +#249769 = EDGE_CURVE('',#249761,#249770,#249772,.T.); +#249770 = VERTEX_POINT('',#249771); +#249771 = CARTESIAN_POINT('',(177.328908,-45.7856,1.585)); +#249772 = LINE('',#249773,#249774); +#249773 = CARTESIAN_POINT('',(176.854392,-45.7856,1.585)); +#249774 = VECTOR('',#249775,1.); +#249775 = DIRECTION('',(1.,0.,0.)); +#249776 = ORIENTED_EDGE('',*,*,#249777,.T.); +#249777 = EDGE_CURVE('',#249770,#249778,#249780,.T.); +#249778 = VERTEX_POINT('',#249779); +#249779 = CARTESIAN_POINT('',(177.328908,-45.9056,1.585)); +#249780 = CIRCLE('',#249781,6.000000000043E-02); +#249781 = AXIS2_PLACEMENT_3D('',#249782,#249783,#249784); +#249782 = CARTESIAN_POINT('',(177.32890822558,-45.8456,1.585)); +#249783 = DIRECTION('',(0.,0.,-1.)); +#249784 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#249785 = ORIENTED_EDGE('',*,*,#249786,.T.); +#249786 = EDGE_CURVE('',#249778,#249759,#249787,.T.); +#249787 = LINE('',#249788,#249789); +#249788 = CARTESIAN_POINT('',(177.328908,-45.9056,1.585)); +#249789 = VECTOR('',#249790,1.); +#249790 = DIRECTION('',(-1.,0.,0.)); +#249791 = PLANE('',#249792); +#249792 = AXIS2_PLACEMENT_3D('',#249793,#249794,#249795); +#249793 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249794 = DIRECTION('',(0.,0.,1.)); +#249795 = DIRECTION('',(1.,0.,-0.)); +#249796 = SHELL_BASED_SURFACE_MODEL('',(#249797)); +#249797 = OPEN_SHELL('',(#249798)); +#249798 = ADVANCED_FACE('',(#249799),#249835,.T.); +#249799 = FACE_BOUND('',#249800,.F.); +#249800 = EDGE_LOOP('',(#249801,#249812,#249820,#249829)); +#249801 = ORIENTED_EDGE('',*,*,#249802,.T.); +#249802 = EDGE_CURVE('',#249803,#249805,#249807,.T.); +#249803 = VERTEX_POINT('',#249804); +#249804 = CARTESIAN_POINT('',(168.27607,-45.8931,1.585)); +#249805 = VERTEX_POINT('',#249806); +#249806 = CARTESIAN_POINT('',(168.27607,-45.7731,1.585)); +#249807 = CIRCLE('',#249808,6.000000000042E-02); +#249808 = AXIS2_PLACEMENT_3D('',#249809,#249810,#249811); +#249809 = CARTESIAN_POINT('',(168.27606977441,-45.8331,1.585)); +#249810 = DIRECTION('',(0.,0.,-1.)); +#249811 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#249812 = ORIENTED_EDGE('',*,*,#249813,.T.); +#249813 = EDGE_CURVE('',#249805,#249814,#249816,.T.); +#249814 = VERTEX_POINT('',#249815); +#249815 = CARTESIAN_POINT('',(168.55723,-45.7731,1.585)); +#249816 = LINE('',#249817,#249818); +#249817 = CARTESIAN_POINT('',(168.27607,-45.7731,1.585)); +#249818 = VECTOR('',#249819,1.); +#249819 = DIRECTION('',(1.,0.,0.)); +#249820 = ORIENTED_EDGE('',*,*,#249821,.T.); +#249821 = EDGE_CURVE('',#249814,#249822,#249824,.T.); +#249822 = VERTEX_POINT('',#249823); +#249823 = CARTESIAN_POINT('',(168.55723,-45.8931,1.585)); +#249824 = CIRCLE('',#249825,6.000000000043E-02); +#249825 = AXIS2_PLACEMENT_3D('',#249826,#249827,#249828); +#249826 = CARTESIAN_POINT('',(168.55723022558,-45.8331,1.585)); +#249827 = DIRECTION('',(0.,0.,-1.)); +#249828 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#249829 = ORIENTED_EDGE('',*,*,#249830,.T.); +#249830 = EDGE_CURVE('',#249822,#249803,#249831,.T.); +#249831 = LINE('',#249832,#249833); +#249832 = CARTESIAN_POINT('',(168.55723,-45.8931,1.585)); +#249833 = VECTOR('',#249834,1.); +#249834 = DIRECTION('',(-1.,0.,0.)); +#249835 = PLANE('',#249836); +#249836 = AXIS2_PLACEMENT_3D('',#249837,#249838,#249839); +#249837 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249838 = DIRECTION('',(0.,0.,1.)); +#249839 = DIRECTION('',(1.,0.,-0.)); +#249840 = SHELL_BASED_SURFACE_MODEL('',(#249841)); +#249841 = OPEN_SHELL('',(#249842)); +#249842 = ADVANCED_FACE('',(#249843),#250018,.T.); +#249843 = FACE_BOUND('',#249844,.F.); +#249844 = EDGE_LOOP('',(#249845,#249855,#249863,#249871,#249879,#249887, + #249896,#249904,#249913,#249921,#249929,#249937,#249945,#249953, + #249962,#249970,#249978,#249986,#249995,#250003,#250012)); +#249845 = ORIENTED_EDGE('',*,*,#249846,.T.); +#249846 = EDGE_CURVE('',#249847,#249849,#249851,.T.); +#249847 = VERTEX_POINT('',#249848); +#249848 = CARTESIAN_POINT('',(163.810216,-45.124977,1.585)); +#249849 = VERTEX_POINT('',#249850); +#249850 = CARTESIAN_POINT('',(163.930663,-45.066917,1.585)); +#249851 = LINE('',#249852,#249853); +#249852 = CARTESIAN_POINT('',(163.810216,-45.124977,1.585)); +#249853 = VECTOR('',#249854,1.); +#249854 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#249855 = ORIENTED_EDGE('',*,*,#249856,.T.); +#249856 = EDGE_CURVE('',#249849,#249857,#249859,.T.); +#249857 = VERTEX_POINT('',#249858); +#249858 = CARTESIAN_POINT('',(164.047938,-45.066205,1.585)); +#249859 = LINE('',#249860,#249861); +#249860 = CARTESIAN_POINT('',(163.930663,-45.066917,1.585)); +#249861 = VECTOR('',#249862,1.); +#249862 = DIRECTION('',(0.999981570774,6.071088283019E-03,0.)); +#249863 = ORIENTED_EDGE('',*,*,#249864,.T.); +#249864 = EDGE_CURVE('',#249857,#249865,#249867,.T.); +#249865 = VERTEX_POINT('',#249866); +#249866 = CARTESIAN_POINT('',(164.225058,-45.125735,1.585)); +#249867 = LINE('',#249868,#249869); +#249868 = CARTESIAN_POINT('',(164.047938,-45.066205,1.585)); +#249869 = VECTOR('',#249870,1.); +#249870 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#249871 = ORIENTED_EDGE('',*,*,#249872,.T.); +#249872 = EDGE_CURVE('',#249865,#249873,#249875,.T.); +#249873 = VERTEX_POINT('',#249874); +#249874 = CARTESIAN_POINT('',(164.679819,-45.578457,1.585)); +#249875 = LINE('',#249876,#249877); +#249876 = CARTESIAN_POINT('',(164.225058,-45.125735,1.585)); +#249877 = VECTOR('',#249878,1.); +#249878 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#249879 = ORIENTED_EDGE('',*,*,#249880,.T.); +#249880 = EDGE_CURVE('',#249873,#249881,#249883,.T.); +#249881 = VERTEX_POINT('',#249882); +#249882 = CARTESIAN_POINT('',(164.68126,-45.125844,1.585)); +#249883 = LINE('',#249884,#249885); +#249884 = CARTESIAN_POINT('',(164.679819,-45.578457,1.585)); +#249885 = VECTOR('',#249886,1.); +#249886 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#249887 = ORIENTED_EDGE('',*,*,#249888,.T.); +#249888 = EDGE_CURVE('',#249881,#249889,#249891,.T.); +#249889 = VERTEX_POINT('',#249890); +#249890 = CARTESIAN_POINT('',(164.829819,-45.140476,1.585)); +#249891 = CIRCLE('',#249892,7.500006711463E-02); +#249892 = AXIS2_PLACEMENT_3D('',#249893,#249894,#249895); +#249893 = CARTESIAN_POINT('',(164.75481893288,-45.14047593288,1.585)); +#249894 = DIRECTION('',(0.,0.,-1.)); +#249895 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#249896 = ORIENTED_EDGE('',*,*,#249897,.T.); +#249897 = EDGE_CURVE('',#249889,#249898,#249900,.T.); +#249898 = VERTEX_POINT('',#249899); +#249899 = CARTESIAN_POINT('',(164.828378,-45.774155,1.585)); +#249900 = LINE('',#249901,#249902); +#249901 = CARTESIAN_POINT('',(164.829819,-45.140476,1.585)); +#249902 = VECTOR('',#249903,1.); +#249903 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#249904 = ORIENTED_EDGE('',*,*,#249905,.T.); +#249905 = EDGE_CURVE('',#249898,#249906,#249908,.T.); +#249906 = VERTEX_POINT('',#249907); +#249907 = CARTESIAN_POINT('',(164.769451,-45.833082,1.585)); +#249908 = CIRCLE('',#249909,7.499663284005E-02); +#249909 = AXIS2_PLACEMENT_3D('',#249910,#249911,#249912); +#249910 = CARTESIAN_POINT('',(164.75482198775,-45.75952598775,1.585)); +#249911 = DIRECTION('',(0.,0.,-1.)); +#249912 = DIRECTION('',(0.980790863049,-0.195062254063,0.)); +#249913 = ORIENTED_EDGE('',*,*,#249914,.T.); +#249914 = EDGE_CURVE('',#249906,#249915,#249917,.T.); +#249915 = VERTEX_POINT('',#249916); +#249916 = CARTESIAN_POINT('',(164.732268,-45.829802,1.585)); +#249917 = LINE('',#249918,#249919); +#249918 = CARTESIAN_POINT('',(164.769451,-45.833082,1.585)); +#249919 = VECTOR('',#249920,1.); +#249920 = DIRECTION('',(-0.996131850393,8.787113652164E-02,0.)); +#249921 = ORIENTED_EDGE('',*,*,#249922,.T.); +#249922 = EDGE_CURVE('',#249915,#249923,#249925,.T.); +#249923 = VERTEX_POINT('',#249924); +#249924 = CARTESIAN_POINT('',(164.701786,-45.812556,1.585)); +#249925 = LINE('',#249926,#249927); +#249926 = CARTESIAN_POINT('',(164.732268,-45.829802,1.585)); +#249927 = VECTOR('',#249928,1.); +#249928 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#249929 = ORIENTED_EDGE('',*,*,#249930,.T.); +#249930 = EDGE_CURVE('',#249923,#249931,#249933,.T.); +#249931 = VERTEX_POINT('',#249932); +#249932 = CARTESIAN_POINT('',(164.142876,-45.253647,1.585)); +#249933 = LINE('',#249934,#249935); +#249934 = CARTESIAN_POINT('',(164.701786,-45.812556,1.585)); +#249935 = VECTOR('',#249936,1.); +#249936 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#249937 = ORIENTED_EDGE('',*,*,#249938,.T.); +#249938 = EDGE_CURVE('',#249931,#249939,#249941,.T.); +#249939 = VERTEX_POINT('',#249940); +#249940 = CARTESIAN_POINT('',(164.028363,-45.215476,1.585)); +#249941 = LINE('',#249942,#249943); +#249942 = CARTESIAN_POINT('',(164.142876,-45.253647,1.585)); +#249943 = VECTOR('',#249944,1.); +#249944 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#249945 = ORIENTED_EDGE('',*,*,#249946,.T.); +#249946 = EDGE_CURVE('',#249939,#249947,#249949,.T.); +#249947 = VERTEX_POINT('',#249948); +#249948 = CARTESIAN_POINT('',(163.963,-45.215476,1.585)); +#249949 = LINE('',#249950,#249951); +#249950 = CARTESIAN_POINT('',(164.028363,-45.215476,1.585)); +#249951 = VECTOR('',#249952,1.); +#249952 = DIRECTION('',(-1.,0.,0.)); +#249953 = ORIENTED_EDGE('',*,*,#249954,.T.); +#249954 = EDGE_CURVE('',#249947,#249955,#249957,.T.); +#249955 = VERTEX_POINT('',#249956); +#249956 = CARTESIAN_POINT('',(163.829819,-45.348657,1.585)); +#249957 = CIRCLE('',#249958,0.18686440374); +#249958 = AXIS2_PLACEMENT_3D('',#249959,#249960,#249961); +#249959 = CARTESIAN_POINT('',(164.010536,-45.396193,1.585)); +#249960 = DIRECTION('',(0.,0.,1.)); +#249961 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#249962 = ORIENTED_EDGE('',*,*,#249963,.T.); +#249963 = EDGE_CURVE('',#249955,#249964,#249966,.T.); +#249964 = VERTEX_POINT('',#249965); +#249965 = CARTESIAN_POINT('',(163.829819,-45.551342,1.585)); +#249966 = LINE('',#249967,#249968); +#249967 = CARTESIAN_POINT('',(163.829819,-45.348657,1.585)); +#249968 = VECTOR('',#249969,1.); +#249969 = DIRECTION('',(0.,-1.,0.)); +#249970 = ORIENTED_EDGE('',*,*,#249971,.T.); +#249971 = EDGE_CURVE('',#249964,#249972,#249974,.T.); +#249972 = VERTEX_POINT('',#249973); +#249973 = CARTESIAN_POINT('',(163.864077,-45.619858,1.585)); +#249974 = LINE('',#249975,#249976); +#249975 = CARTESIAN_POINT('',(163.829819,-45.551342,1.585)); +#249976 = VECTOR('',#249977,1.); +#249977 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#249978 = ORIENTED_EDGE('',*,*,#249979,.T.); +#249979 = EDGE_CURVE('',#249972,#249980,#249982,.T.); +#249980 = VERTEX_POINT('',#249981); +#249981 = CARTESIAN_POINT('',(163.912417,-45.670236,1.585)); +#249982 = LINE('',#249983,#249984); +#249983 = CARTESIAN_POINT('',(163.864077,-45.619858,1.585)); +#249984 = VECTOR('',#249985,1.); +#249985 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#249986 = ORIENTED_EDGE('',*,*,#249987,.T.); +#249987 = EDGE_CURVE('',#249980,#249988,#249990,.T.); +#249988 = VERTEX_POINT('',#249989); +#249989 = CARTESIAN_POINT('',(163.797024,-45.764937,1.585)); +#249990 = CIRCLE('',#249991,7.500003178657E-02); +#249991 = AXIS2_PLACEMENT_3D('',#249992,#249993,#249994); +#249992 = CARTESIAN_POINT('',(163.85005656212,-45.7119035,1.585)); +#249993 = DIRECTION('',(0.,0.,-1.)); +#249994 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#249995 = ORIENTED_EDGE('',*,*,#249996,.T.); +#249996 = EDGE_CURVE('',#249988,#249997,#249999,.T.); +#249997 = VERTEX_POINT('',#249998); +#249998 = CARTESIAN_POINT('',(163.735356,-45.697826,1.585)); +#249999 = LINE('',#250000,#250001); +#250000 = CARTESIAN_POINT('',(163.797024,-45.764937,1.585)); +#250001 = VECTOR('',#250002,1.); +#250002 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#250003 = ORIENTED_EDGE('',*,*,#250004,.T.); +#250004 = EDGE_CURVE('',#249997,#250005,#250007,.T.); +#250005 = VERTEX_POINT('',#250006); +#250006 = CARTESIAN_POINT('',(163.744686,-45.18843,1.585)); +#250007 = CIRCLE('',#250008,0.450051227017); +#250008 = AXIS2_PLACEMENT_3D('',#250009,#250010,#250011); +#250009 = CARTESIAN_POINT('',(164.11097532415,-45.44992232866,1.585)); +#250010 = DIRECTION('',(0.,0.,-1.)); +#250011 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#250012 = ORIENTED_EDGE('',*,*,#250013,.T.); +#250013 = EDGE_CURVE('',#250005,#249847,#250014,.T.); +#250014 = LINE('',#250015,#250016); +#250015 = CARTESIAN_POINT('',(163.744686,-45.18843,1.585)); +#250016 = VECTOR('',#250017,1.); +#250017 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#250018 = PLANE('',#250019); +#250019 = AXIS2_PLACEMENT_3D('',#250020,#250021,#250022); +#250020 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250021 = DIRECTION('',(0.,0.,1.)); +#250022 = DIRECTION('',(1.,0.,-0.)); +#250023 = SHELL_BASED_SURFACE_MODEL('',(#250024)); +#250024 = OPEN_SHELL('',(#250025)); +#250025 = ADVANCED_FACE('',(#250026),#250094,.T.); +#250026 = FACE_BOUND('',#250027,.F.); +#250027 = EDGE_LOOP('',(#250028,#250039,#250047,#250055,#250063,#250071, + #250080,#250088)); +#250028 = ORIENTED_EDGE('',*,*,#250029,.T.); +#250029 = EDGE_CURVE('',#250030,#250032,#250034,.T.); +#250030 = VERTEX_POINT('',#250031); +#250031 = CARTESIAN_POINT('',(185.24165,-43.7331,1.585)); +#250032 = VERTEX_POINT('',#250033); +#250033 = CARTESIAN_POINT('',(185.24165,-43.6131,1.585)); +#250034 = CIRCLE('',#250035,6.000000000042E-02); +#250035 = AXIS2_PLACEMENT_3D('',#250036,#250037,#250038); +#250036 = CARTESIAN_POINT('',(185.24164977441,-43.6731,1.585)); +#250037 = DIRECTION('',(0.,0.,-1.)); +#250038 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#250039 = ORIENTED_EDGE('',*,*,#250040,.T.); +#250040 = EDGE_CURVE('',#250032,#250041,#250043,.T.); +#250041 = VERTEX_POINT('',#250042); +#250042 = CARTESIAN_POINT('',(189.34165,-43.6131,1.585)); +#250043 = LINE('',#250044,#250045); +#250044 = CARTESIAN_POINT('',(185.24165,-43.6131,1.585)); +#250045 = VECTOR('',#250046,1.); +#250046 = DIRECTION('',(1.,0.,0.)); +#250047 = ORIENTED_EDGE('',*,*,#250048,.T.); +#250048 = EDGE_CURVE('',#250041,#250049,#250051,.T.); +#250049 = VERTEX_POINT('',#250050); +#250050 = CARTESIAN_POINT('',(189.364611,-43.617667,1.585)); +#250051 = LINE('',#250052,#250053); +#250052 = CARTESIAN_POINT('',(189.34165,-43.6131,1.585)); +#250053 = VECTOR('',#250054,1.); +#250054 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#250055 = ORIENTED_EDGE('',*,*,#250056,.T.); +#250056 = EDGE_CURVE('',#250049,#250057,#250059,.T.); +#250057 = VERTEX_POINT('',#250058); +#250058 = CARTESIAN_POINT('',(189.384076,-43.630674,1.585)); +#250059 = LINE('',#250060,#250061); +#250060 = CARTESIAN_POINT('',(189.364611,-43.617667,1.585)); +#250061 = VECTOR('',#250062,1.); +#250062 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#250063 = ORIENTED_EDGE('',*,*,#250064,.T.); +#250064 = EDGE_CURVE('',#250057,#250065,#250067,.T.); +#250065 = VERTEX_POINT('',#250066); +#250066 = CARTESIAN_POINT('',(191.484076,-45.730673,1.585)); +#250067 = LINE('',#250068,#250069); +#250068 = CARTESIAN_POINT('',(189.384076,-43.630674,1.585)); +#250069 = VECTOR('',#250070,1.); +#250070 = DIRECTION('',(0.707106949545,-0.707106612828,0.)); +#250071 = ORIENTED_EDGE('',*,*,#250072,.T.); +#250072 = EDGE_CURVE('',#250065,#250073,#250075,.T.); +#250073 = VERTEX_POINT('',#250074); +#250074 = CARTESIAN_POINT('',(191.399223,-45.815526,1.585)); +#250075 = CIRCLE('',#250076,6.000013170922E-02); +#250076 = AXIS2_PLACEMENT_3D('',#250077,#250078,#250079); +#250077 = CARTESIAN_POINT('',(191.4416500587,-45.7731000587,1.585)); +#250078 = DIRECTION('',(0.,0.,-1.)); +#250079 = DIRECTION('',(0.707097469327,0.707116092923,0.)); +#250080 = ORIENTED_EDGE('',*,*,#250081,.T.); +#250081 = EDGE_CURVE('',#250073,#250082,#250084,.T.); +#250082 = VERTEX_POINT('',#250083); +#250083 = CARTESIAN_POINT('',(189.316798,-43.7331,1.585)); +#250084 = LINE('',#250085,#250086); +#250085 = CARTESIAN_POINT('',(191.399223,-45.815526,1.585)); +#250086 = VECTOR('',#250087,1.); +#250087 = DIRECTION('',(-0.707106611407,0.707106950966,0.)); +#250088 = ORIENTED_EDGE('',*,*,#250089,.T.); +#250089 = EDGE_CURVE('',#250082,#250030,#250090,.T.); +#250090 = LINE('',#250091,#250092); +#250091 = CARTESIAN_POINT('',(189.316798,-43.7331,1.585)); +#250092 = VECTOR('',#250093,1.); +#250093 = DIRECTION('',(-1.,0.,0.)); +#250094 = PLANE('',#250095); +#250095 = AXIS2_PLACEMENT_3D('',#250096,#250097,#250098); +#250096 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250097 = DIRECTION('',(0.,0.,1.)); +#250098 = DIRECTION('',(1.,0.,-0.)); +#250099 = SHELL_BASED_SURFACE_MODEL('',(#250100)); +#250100 = OPEN_SHELL('',(#250101)); +#250101 = ADVANCED_FACE('',(#250102),#250188,.T.); +#250102 = FACE_BOUND('',#250103,.F.); +#250103 = EDGE_LOOP('',(#250104,#250115,#250123,#250132,#250140,#250148, + #250156,#250165,#250173,#250182)); +#250104 = ORIENTED_EDGE('',*,*,#250105,.T.); +#250105 = EDGE_CURVE('',#250106,#250108,#250110,.T.); +#250106 = VERTEX_POINT('',#250107); +#250107 = CARTESIAN_POINT('',(192.50915,-43.3631,1.585)); +#250108 = VERTEX_POINT('',#250109); +#250109 = CARTESIAN_POINT('',(192.56915,-43.3031,1.585)); +#250110 = CIRCLE('',#250111,5.999932016262E-02); +#250111 = AXIS2_PLACEMENT_3D('',#250112,#250113,#250114); +#250112 = CARTESIAN_POINT('',(192.56914932015,-43.36309932015,1.585)); +#250113 = DIRECTION('',(0.,0.,-1.)); +#250114 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250115 = ORIENTED_EDGE('',*,*,#250116,.T.); +#250116 = EDGE_CURVE('',#250108,#250117,#250119,.T.); +#250117 = VERTEX_POINT('',#250118); +#250118 = CARTESIAN_POINT('',(195.25415,-43.3031,1.585)); +#250119 = LINE('',#250120,#250121); +#250120 = CARTESIAN_POINT('',(192.56915,-43.3031,1.585)); +#250121 = VECTOR('',#250122,1.); +#250122 = DIRECTION('',(1.,0.,0.)); +#250123 = ORIENTED_EDGE('',*,*,#250124,.T.); +#250124 = EDGE_CURVE('',#250117,#250125,#250127,.T.); +#250125 = VERTEX_POINT('',#250126); +#250126 = CARTESIAN_POINT('',(195.25415,-43.4231,1.585)); +#250127 = CIRCLE('',#250128,6.000000000043E-02); +#250128 = AXIS2_PLACEMENT_3D('',#250129,#250130,#250131); +#250129 = CARTESIAN_POINT('',(195.25415022558,-43.3631,1.585)); +#250130 = DIRECTION('',(0.,0.,-1.)); +#250131 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250132 = ORIENTED_EDGE('',*,*,#250133,.T.); +#250133 = EDGE_CURVE('',#250125,#250134,#250136,.T.); +#250134 = VERTEX_POINT('',#250135); +#250135 = CARTESIAN_POINT('',(192.62915,-43.4231,1.585)); +#250136 = LINE('',#250137,#250138); +#250137 = CARTESIAN_POINT('',(195.25415,-43.4231,1.585)); +#250138 = VECTOR('',#250139,1.); +#250139 = DIRECTION('',(-1.,0.,0.)); +#250140 = ORIENTED_EDGE('',*,*,#250141,.T.); +#250141 = EDGE_CURVE('',#250134,#250142,#250144,.T.); +#250142 = VERTEX_POINT('',#250143); +#250143 = CARTESIAN_POINT('',(192.62915,-45.2231,1.585)); +#250144 = LINE('',#250145,#250146); +#250145 = CARTESIAN_POINT('',(192.62915,-43.4231,1.585)); +#250146 = VECTOR('',#250147,1.); +#250147 = DIRECTION('',(0.,-1.,0.)); +#250148 = ORIENTED_EDGE('',*,*,#250149,.T.); +#250149 = EDGE_CURVE('',#250142,#250150,#250152,.T.); +#250150 = VERTEX_POINT('',#250151); +#250151 = CARTESIAN_POINT('',(195.25415,-45.2231,1.585)); +#250152 = LINE('',#250153,#250154); +#250153 = CARTESIAN_POINT('',(192.62915,-45.2231,1.585)); +#250154 = VECTOR('',#250155,1.); +#250155 = DIRECTION('',(1.,0.,0.)); +#250156 = ORIENTED_EDGE('',*,*,#250157,.T.); +#250157 = EDGE_CURVE('',#250150,#250158,#250160,.T.); +#250158 = VERTEX_POINT('',#250159); +#250159 = CARTESIAN_POINT('',(195.25415,-45.3431,1.585)); +#250160 = CIRCLE('',#250161,6.000000000043E-02); +#250161 = AXIS2_PLACEMENT_3D('',#250162,#250163,#250164); +#250162 = CARTESIAN_POINT('',(195.25415022558,-45.2831,1.585)); +#250163 = DIRECTION('',(0.,0.,-1.)); +#250164 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250165 = ORIENTED_EDGE('',*,*,#250166,.T.); +#250166 = EDGE_CURVE('',#250158,#250167,#250169,.T.); +#250167 = VERTEX_POINT('',#250168); +#250168 = CARTESIAN_POINT('',(192.56915,-45.3431,1.585)); +#250169 = LINE('',#250170,#250171); +#250170 = CARTESIAN_POINT('',(195.25415,-45.3431,1.585)); +#250171 = VECTOR('',#250172,1.); +#250172 = DIRECTION('',(-1.,0.,0.)); +#250173 = ORIENTED_EDGE('',*,*,#250174,.T.); +#250174 = EDGE_CURVE('',#250167,#250175,#250177,.T.); +#250175 = VERTEX_POINT('',#250176); +#250176 = CARTESIAN_POINT('',(192.50915,-45.2831,1.585)); +#250177 = CIRCLE('',#250178,5.999932016259E-02); +#250178 = AXIS2_PLACEMENT_3D('',#250179,#250180,#250181); +#250179 = CARTESIAN_POINT('',(192.56914932015,-45.28310067984,1.585)); +#250180 = DIRECTION('',(0.,0.,-1.)); +#250181 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250182 = ORIENTED_EDGE('',*,*,#250183,.T.); +#250183 = EDGE_CURVE('',#250175,#250106,#250184,.T.); +#250184 = LINE('',#250185,#250186); +#250185 = CARTESIAN_POINT('',(192.50915,-45.2831,1.585)); +#250186 = VECTOR('',#250187,1.); +#250187 = DIRECTION('',(0.,1.,0.)); +#250188 = PLANE('',#250189); +#250189 = AXIS2_PLACEMENT_3D('',#250190,#250191,#250192); +#250190 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250191 = DIRECTION('',(0.,0.,1.)); +#250192 = DIRECTION('',(1.,0.,-0.)); +#250193 = SHELL_BASED_SURFACE_MODEL('',(#250194)); +#250194 = OPEN_SHELL('',(#250195)); +#250195 = ADVANCED_FACE('',(#250196),#250282,.T.); +#250196 = FACE_BOUND('',#250197,.F.); +#250197 = EDGE_LOOP('',(#250198,#250209,#250217,#250226,#250234,#250242, + #250250,#250259,#250267,#250276)); +#250198 = ORIENTED_EDGE('',*,*,#250199,.T.); +#250199 = EDGE_CURVE('',#250200,#250202,#250204,.T.); +#250200 = VERTEX_POINT('',#250201); +#250201 = CARTESIAN_POINT('',(196.50915,-43.3631,1.585)); +#250202 = VERTEX_POINT('',#250203); +#250203 = CARTESIAN_POINT('',(196.56915,-43.3031,1.585)); +#250204 = CIRCLE('',#250205,5.999932016262E-02); +#250205 = AXIS2_PLACEMENT_3D('',#250206,#250207,#250208); +#250206 = CARTESIAN_POINT('',(196.56914932015,-43.36309932015,1.585)); +#250207 = DIRECTION('',(0.,0.,-1.)); +#250208 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250209 = ORIENTED_EDGE('',*,*,#250210,.T.); +#250210 = EDGE_CURVE('',#250202,#250211,#250213,.T.); +#250211 = VERTEX_POINT('',#250212); +#250212 = CARTESIAN_POINT('',(199.25415,-43.3031,1.585)); +#250213 = LINE('',#250214,#250215); +#250214 = CARTESIAN_POINT('',(196.56915,-43.3031,1.585)); +#250215 = VECTOR('',#250216,1.); +#250216 = DIRECTION('',(1.,0.,0.)); +#250217 = ORIENTED_EDGE('',*,*,#250218,.T.); +#250218 = EDGE_CURVE('',#250211,#250219,#250221,.T.); +#250219 = VERTEX_POINT('',#250220); +#250220 = CARTESIAN_POINT('',(199.25415,-43.4231,1.585)); +#250221 = CIRCLE('',#250222,6.000000000043E-02); +#250222 = AXIS2_PLACEMENT_3D('',#250223,#250224,#250225); +#250223 = CARTESIAN_POINT('',(199.25415022558,-43.3631,1.585)); +#250224 = DIRECTION('',(0.,0.,-1.)); +#250225 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250226 = ORIENTED_EDGE('',*,*,#250227,.T.); +#250227 = EDGE_CURVE('',#250219,#250228,#250230,.T.); +#250228 = VERTEX_POINT('',#250229); +#250229 = CARTESIAN_POINT('',(196.62915,-43.4231,1.585)); +#250230 = LINE('',#250231,#250232); +#250231 = CARTESIAN_POINT('',(199.25415,-43.4231,1.585)); +#250232 = VECTOR('',#250233,1.); +#250233 = DIRECTION('',(-1.,0.,0.)); +#250234 = ORIENTED_EDGE('',*,*,#250235,.T.); +#250235 = EDGE_CURVE('',#250228,#250236,#250238,.T.); +#250236 = VERTEX_POINT('',#250237); +#250237 = CARTESIAN_POINT('',(196.62915,-45.2231,1.585)); +#250238 = LINE('',#250239,#250240); +#250239 = CARTESIAN_POINT('',(196.62915,-43.4231,1.585)); +#250240 = VECTOR('',#250241,1.); +#250241 = DIRECTION('',(0.,-1.,0.)); +#250242 = ORIENTED_EDGE('',*,*,#250243,.T.); +#250243 = EDGE_CURVE('',#250236,#250244,#250246,.T.); +#250244 = VERTEX_POINT('',#250245); +#250245 = CARTESIAN_POINT('',(199.25415,-45.2231,1.585)); +#250246 = LINE('',#250247,#250248); +#250247 = CARTESIAN_POINT('',(196.62915,-45.2231,1.585)); +#250248 = VECTOR('',#250249,1.); +#250249 = DIRECTION('',(1.,0.,0.)); +#250250 = ORIENTED_EDGE('',*,*,#250251,.T.); +#250251 = EDGE_CURVE('',#250244,#250252,#250254,.T.); +#250252 = VERTEX_POINT('',#250253); +#250253 = CARTESIAN_POINT('',(199.25415,-45.3431,1.585)); +#250254 = CIRCLE('',#250255,6.000000000043E-02); +#250255 = AXIS2_PLACEMENT_3D('',#250256,#250257,#250258); +#250256 = CARTESIAN_POINT('',(199.25415022558,-45.2831,1.585)); +#250257 = DIRECTION('',(0.,0.,-1.)); +#250258 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250259 = ORIENTED_EDGE('',*,*,#250260,.T.); +#250260 = EDGE_CURVE('',#250252,#250261,#250263,.T.); +#250261 = VERTEX_POINT('',#250262); +#250262 = CARTESIAN_POINT('',(196.56915,-45.3431,1.585)); +#250263 = LINE('',#250264,#250265); +#250264 = CARTESIAN_POINT('',(199.25415,-45.3431,1.585)); +#250265 = VECTOR('',#250266,1.); +#250266 = DIRECTION('',(-1.,0.,0.)); +#250267 = ORIENTED_EDGE('',*,*,#250268,.T.); +#250268 = EDGE_CURVE('',#250261,#250269,#250271,.T.); +#250269 = VERTEX_POINT('',#250270); +#250270 = CARTESIAN_POINT('',(196.50915,-45.2831,1.585)); +#250271 = CIRCLE('',#250272,5.999932016259E-02); +#250272 = AXIS2_PLACEMENT_3D('',#250273,#250274,#250275); +#250273 = CARTESIAN_POINT('',(196.56914932015,-45.28310067984,1.585)); +#250274 = DIRECTION('',(0.,0.,-1.)); +#250275 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250276 = ORIENTED_EDGE('',*,*,#250277,.T.); +#250277 = EDGE_CURVE('',#250269,#250200,#250278,.T.); +#250278 = LINE('',#250279,#250280); +#250279 = CARTESIAN_POINT('',(196.50915,-45.2831,1.585)); +#250280 = VECTOR('',#250281,1.); +#250281 = DIRECTION('',(0.,1.,0.)); +#250282 = PLANE('',#250283); +#250283 = AXIS2_PLACEMENT_3D('',#250284,#250285,#250286); +#250284 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250285 = DIRECTION('',(0.,0.,1.)); +#250286 = DIRECTION('',(1.,0.,-0.)); +#250287 = SHELL_BASED_SURFACE_MODEL('',(#250288)); +#250288 = OPEN_SHELL('',(#250289)); +#250289 = ADVANCED_FACE('',(#250290),#250376,.T.); +#250290 = FACE_BOUND('',#250291,.F.); +#250291 = EDGE_LOOP('',(#250292,#250303,#250311,#250320,#250328,#250336, + #250344,#250353,#250361,#250370)); +#250292 = ORIENTED_EDGE('',*,*,#250293,.T.); +#250293 = EDGE_CURVE('',#250294,#250296,#250298,.T.); +#250294 = VERTEX_POINT('',#250295); +#250295 = CARTESIAN_POINT('',(200.50915,-43.3631,1.585)); +#250296 = VERTEX_POINT('',#250297); +#250297 = CARTESIAN_POINT('',(200.56915,-43.3031,1.585)); +#250298 = CIRCLE('',#250299,5.999932016262E-02); +#250299 = AXIS2_PLACEMENT_3D('',#250300,#250301,#250302); +#250300 = CARTESIAN_POINT('',(200.56914932015,-43.36309932015,1.585)); +#250301 = DIRECTION('',(0.,0.,-1.)); +#250302 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250303 = ORIENTED_EDGE('',*,*,#250304,.T.); +#250304 = EDGE_CURVE('',#250296,#250305,#250307,.T.); +#250305 = VERTEX_POINT('',#250306); +#250306 = CARTESIAN_POINT('',(203.25415,-43.3031,1.585)); +#250307 = LINE('',#250308,#250309); +#250308 = CARTESIAN_POINT('',(200.56915,-43.3031,1.585)); +#250309 = VECTOR('',#250310,1.); +#250310 = DIRECTION('',(1.,0.,0.)); +#250311 = ORIENTED_EDGE('',*,*,#250312,.T.); +#250312 = EDGE_CURVE('',#250305,#250313,#250315,.T.); +#250313 = VERTEX_POINT('',#250314); +#250314 = CARTESIAN_POINT('',(203.25415,-43.4231,1.585)); +#250315 = CIRCLE('',#250316,6.000000000043E-02); +#250316 = AXIS2_PLACEMENT_3D('',#250317,#250318,#250319); +#250317 = CARTESIAN_POINT('',(203.25415022558,-43.3631,1.585)); +#250318 = DIRECTION('',(0.,0.,-1.)); +#250319 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250320 = ORIENTED_EDGE('',*,*,#250321,.T.); +#250321 = EDGE_CURVE('',#250313,#250322,#250324,.T.); +#250322 = VERTEX_POINT('',#250323); +#250323 = CARTESIAN_POINT('',(200.62915,-43.4231,1.585)); +#250324 = LINE('',#250325,#250326); +#250325 = CARTESIAN_POINT('',(203.25415,-43.4231,1.585)); +#250326 = VECTOR('',#250327,1.); +#250327 = DIRECTION('',(-1.,0.,0.)); +#250328 = ORIENTED_EDGE('',*,*,#250329,.T.); +#250329 = EDGE_CURVE('',#250322,#250330,#250332,.T.); +#250330 = VERTEX_POINT('',#250331); +#250331 = CARTESIAN_POINT('',(200.62915,-45.2231,1.585)); +#250332 = LINE('',#250333,#250334); +#250333 = CARTESIAN_POINT('',(200.62915,-43.4231,1.585)); +#250334 = VECTOR('',#250335,1.); +#250335 = DIRECTION('',(0.,-1.,0.)); +#250336 = ORIENTED_EDGE('',*,*,#250337,.T.); +#250337 = EDGE_CURVE('',#250330,#250338,#250340,.T.); +#250338 = VERTEX_POINT('',#250339); +#250339 = CARTESIAN_POINT('',(203.25415,-45.2231,1.585)); +#250340 = LINE('',#250341,#250342); +#250341 = CARTESIAN_POINT('',(200.62915,-45.2231,1.585)); +#250342 = VECTOR('',#250343,1.); +#250343 = DIRECTION('',(1.,0.,0.)); +#250344 = ORIENTED_EDGE('',*,*,#250345,.T.); +#250345 = EDGE_CURVE('',#250338,#250346,#250348,.T.); +#250346 = VERTEX_POINT('',#250347); +#250347 = CARTESIAN_POINT('',(203.25415,-45.3431,1.585)); +#250348 = CIRCLE('',#250349,6.000000000043E-02); +#250349 = AXIS2_PLACEMENT_3D('',#250350,#250351,#250352); +#250350 = CARTESIAN_POINT('',(203.25415022558,-45.2831,1.585)); +#250351 = DIRECTION('',(0.,0.,-1.)); +#250352 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250353 = ORIENTED_EDGE('',*,*,#250354,.T.); +#250354 = EDGE_CURVE('',#250346,#250355,#250357,.T.); +#250355 = VERTEX_POINT('',#250356); +#250356 = CARTESIAN_POINT('',(200.56915,-45.3431,1.585)); +#250357 = LINE('',#250358,#250359); +#250358 = CARTESIAN_POINT('',(203.25415,-45.3431,1.585)); +#250359 = VECTOR('',#250360,1.); +#250360 = DIRECTION('',(-1.,0.,0.)); +#250361 = ORIENTED_EDGE('',*,*,#250362,.T.); +#250362 = EDGE_CURVE('',#250355,#250363,#250365,.T.); +#250363 = VERTEX_POINT('',#250364); +#250364 = CARTESIAN_POINT('',(200.50915,-45.2831,1.585)); +#250365 = CIRCLE('',#250366,5.999932016259E-02); +#250366 = AXIS2_PLACEMENT_3D('',#250367,#250368,#250369); +#250367 = CARTESIAN_POINT('',(200.56914932015,-45.28310067984,1.585)); +#250368 = DIRECTION('',(0.,0.,-1.)); +#250369 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250370 = ORIENTED_EDGE('',*,*,#250371,.T.); +#250371 = EDGE_CURVE('',#250363,#250294,#250372,.T.); +#250372 = LINE('',#250373,#250374); +#250373 = CARTESIAN_POINT('',(200.50915,-45.2831,1.585)); +#250374 = VECTOR('',#250375,1.); +#250375 = DIRECTION('',(0.,1.,0.)); +#250376 = PLANE('',#250377); +#250377 = AXIS2_PLACEMENT_3D('',#250378,#250379,#250380); +#250378 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250379 = DIRECTION('',(0.,0.,1.)); +#250380 = DIRECTION('',(1.,0.,-0.)); +#250381 = SHELL_BASED_SURFACE_MODEL('',(#250382)); +#250382 = OPEN_SHELL('',(#250383)); +#250383 = ADVANCED_FACE('',(#250384),#250470,.T.); +#250384 = FACE_BOUND('',#250385,.F.); +#250385 = EDGE_LOOP('',(#250386,#250397,#250405,#250414,#250422,#250430, + #250438,#250447,#250455,#250464)); +#250386 = ORIENTED_EDGE('',*,*,#250387,.T.); +#250387 = EDGE_CURVE('',#250388,#250390,#250392,.T.); +#250388 = VERTEX_POINT('',#250389); +#250389 = CARTESIAN_POINT('',(204.50915,-43.3631,1.585)); +#250390 = VERTEX_POINT('',#250391); +#250391 = CARTESIAN_POINT('',(204.56915,-43.3031,1.585)); +#250392 = CIRCLE('',#250393,5.999932016262E-02); +#250393 = AXIS2_PLACEMENT_3D('',#250394,#250395,#250396); +#250394 = CARTESIAN_POINT('',(204.56914932015,-43.36309932015,1.585)); +#250395 = DIRECTION('',(0.,0.,-1.)); +#250396 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250397 = ORIENTED_EDGE('',*,*,#250398,.T.); +#250398 = EDGE_CURVE('',#250390,#250399,#250401,.T.); +#250399 = VERTEX_POINT('',#250400); +#250400 = CARTESIAN_POINT('',(207.25415,-43.3031,1.585)); +#250401 = LINE('',#250402,#250403); +#250402 = CARTESIAN_POINT('',(204.56915,-43.3031,1.585)); +#250403 = VECTOR('',#250404,1.); +#250404 = DIRECTION('',(1.,0.,0.)); +#250405 = ORIENTED_EDGE('',*,*,#250406,.T.); +#250406 = EDGE_CURVE('',#250399,#250407,#250409,.T.); +#250407 = VERTEX_POINT('',#250408); +#250408 = CARTESIAN_POINT('',(207.25415,-43.4231,1.585)); +#250409 = CIRCLE('',#250410,6.000000000043E-02); +#250410 = AXIS2_PLACEMENT_3D('',#250411,#250412,#250413); +#250411 = CARTESIAN_POINT('',(207.25415022558,-43.3631,1.585)); +#250412 = DIRECTION('',(0.,0.,-1.)); +#250413 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250414 = ORIENTED_EDGE('',*,*,#250415,.T.); +#250415 = EDGE_CURVE('',#250407,#250416,#250418,.T.); +#250416 = VERTEX_POINT('',#250417); +#250417 = CARTESIAN_POINT('',(204.62915,-43.4231,1.585)); +#250418 = LINE('',#250419,#250420); +#250419 = CARTESIAN_POINT('',(207.25415,-43.4231,1.585)); +#250420 = VECTOR('',#250421,1.); +#250421 = DIRECTION('',(-1.,0.,0.)); +#250422 = ORIENTED_EDGE('',*,*,#250423,.T.); +#250423 = EDGE_CURVE('',#250416,#250424,#250426,.T.); +#250424 = VERTEX_POINT('',#250425); +#250425 = CARTESIAN_POINT('',(204.62915,-45.2231,1.585)); +#250426 = LINE('',#250427,#250428); +#250427 = CARTESIAN_POINT('',(204.62915,-43.4231,1.585)); +#250428 = VECTOR('',#250429,1.); +#250429 = DIRECTION('',(0.,-1.,0.)); +#250430 = ORIENTED_EDGE('',*,*,#250431,.T.); +#250431 = EDGE_CURVE('',#250424,#250432,#250434,.T.); +#250432 = VERTEX_POINT('',#250433); +#250433 = CARTESIAN_POINT('',(207.25415,-45.2231,1.585)); +#250434 = LINE('',#250435,#250436); +#250435 = CARTESIAN_POINT('',(204.62915,-45.2231,1.585)); +#250436 = VECTOR('',#250437,1.); +#250437 = DIRECTION('',(1.,0.,0.)); +#250438 = ORIENTED_EDGE('',*,*,#250439,.T.); +#250439 = EDGE_CURVE('',#250432,#250440,#250442,.T.); +#250440 = VERTEX_POINT('',#250441); +#250441 = CARTESIAN_POINT('',(207.25415,-45.3431,1.585)); +#250442 = CIRCLE('',#250443,6.000000000043E-02); +#250443 = AXIS2_PLACEMENT_3D('',#250444,#250445,#250446); +#250444 = CARTESIAN_POINT('',(207.25415022558,-45.2831,1.585)); +#250445 = DIRECTION('',(0.,0.,-1.)); +#250446 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250447 = ORIENTED_EDGE('',*,*,#250448,.T.); +#250448 = EDGE_CURVE('',#250440,#250449,#250451,.T.); +#250449 = VERTEX_POINT('',#250450); +#250450 = CARTESIAN_POINT('',(204.56915,-45.3431,1.585)); +#250451 = LINE('',#250452,#250453); +#250452 = CARTESIAN_POINT('',(207.25415,-45.3431,1.585)); +#250453 = VECTOR('',#250454,1.); +#250454 = DIRECTION('',(-1.,0.,0.)); +#250455 = ORIENTED_EDGE('',*,*,#250456,.T.); +#250456 = EDGE_CURVE('',#250449,#250457,#250459,.T.); +#250457 = VERTEX_POINT('',#250458); +#250458 = CARTESIAN_POINT('',(204.50915,-45.2831,1.585)); +#250459 = CIRCLE('',#250460,5.999932016259E-02); +#250460 = AXIS2_PLACEMENT_3D('',#250461,#250462,#250463); +#250461 = CARTESIAN_POINT('',(204.56914932015,-45.28310067984,1.585)); +#250462 = DIRECTION('',(0.,0.,-1.)); +#250463 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250464 = ORIENTED_EDGE('',*,*,#250465,.T.); +#250465 = EDGE_CURVE('',#250457,#250388,#250466,.T.); +#250466 = LINE('',#250467,#250468); +#250467 = CARTESIAN_POINT('',(204.50915,-45.2831,1.585)); +#250468 = VECTOR('',#250469,1.); +#250469 = DIRECTION('',(0.,1.,0.)); +#250470 = PLANE('',#250471); +#250471 = AXIS2_PLACEMENT_3D('',#250472,#250473,#250474); +#250472 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250473 = DIRECTION('',(0.,0.,1.)); +#250474 = DIRECTION('',(1.,0.,-0.)); +#250475 = SHELL_BASED_SURFACE_MODEL('',(#250476)); +#250476 = OPEN_SHELL('',(#250477)); +#250477 = ADVANCED_FACE('',(#250478),#250653,.T.); +#250478 = FACE_BOUND('',#250479,.F.); +#250479 = EDGE_LOOP('',(#250480,#250490,#250498,#250506,#250514,#250522, + #250531,#250539,#250548,#250556,#250564,#250572,#250580,#250588, + #250597,#250605,#250613,#250621,#250630,#250638,#250647)); +#250480 = ORIENTED_EDGE('',*,*,#250481,.T.); +#250481 = EDGE_CURVE('',#250482,#250484,#250486,.T.); +#250482 = VERTEX_POINT('',#250483); +#250483 = CARTESIAN_POINT('',(163.810216,-44.172596,1.585)); +#250484 = VERTEX_POINT('',#250485); +#250485 = CARTESIAN_POINT('',(163.930663,-44.114536,1.585)); +#250486 = LINE('',#250487,#250488); +#250487 = CARTESIAN_POINT('',(163.810216,-44.172596,1.585)); +#250488 = VECTOR('',#250489,1.); +#250489 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#250490 = ORIENTED_EDGE('',*,*,#250491,.T.); +#250491 = EDGE_CURVE('',#250484,#250492,#250494,.T.); +#250492 = VERTEX_POINT('',#250493); +#250493 = CARTESIAN_POINT('',(164.047938,-44.113824,1.585)); +#250494 = LINE('',#250495,#250496); +#250495 = CARTESIAN_POINT('',(163.930663,-44.114536,1.585)); +#250496 = VECTOR('',#250497,1.); +#250497 = DIRECTION('',(0.999981570774,6.071088283019E-03,0.)); +#250498 = ORIENTED_EDGE('',*,*,#250499,.T.); +#250499 = EDGE_CURVE('',#250492,#250500,#250502,.T.); +#250500 = VERTEX_POINT('',#250501); +#250501 = CARTESIAN_POINT('',(164.225058,-44.173354,1.585)); +#250502 = LINE('',#250503,#250504); +#250503 = CARTESIAN_POINT('',(164.047938,-44.113824,1.585)); +#250504 = VECTOR('',#250505,1.); +#250505 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#250506 = ORIENTED_EDGE('',*,*,#250507,.T.); +#250507 = EDGE_CURVE('',#250500,#250508,#250510,.T.); +#250508 = VERTEX_POINT('',#250509); +#250509 = CARTESIAN_POINT('',(164.679819,-44.626076,1.585)); +#250510 = LINE('',#250511,#250512); +#250511 = CARTESIAN_POINT('',(164.225058,-44.173354,1.585)); +#250512 = VECTOR('',#250513,1.); +#250513 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#250514 = ORIENTED_EDGE('',*,*,#250515,.T.); +#250515 = EDGE_CURVE('',#250508,#250516,#250518,.T.); +#250516 = VERTEX_POINT('',#250517); +#250517 = CARTESIAN_POINT('',(164.68126,-44.173463,1.585)); +#250518 = LINE('',#250519,#250520); +#250519 = CARTESIAN_POINT('',(164.679819,-44.626076,1.585)); +#250520 = VECTOR('',#250521,1.); +#250521 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#250522 = ORIENTED_EDGE('',*,*,#250523,.T.); +#250523 = EDGE_CURVE('',#250516,#250524,#250526,.T.); +#250524 = VERTEX_POINT('',#250525); +#250525 = CARTESIAN_POINT('',(164.829819,-44.188095,1.585)); +#250526 = CIRCLE('',#250527,7.500006711463E-02); +#250527 = AXIS2_PLACEMENT_3D('',#250528,#250529,#250530); +#250528 = CARTESIAN_POINT('',(164.75481893288,-44.18809493288,1.585)); +#250529 = DIRECTION('',(0.,0.,-1.)); +#250530 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#250531 = ORIENTED_EDGE('',*,*,#250532,.T.); +#250532 = EDGE_CURVE('',#250524,#250533,#250535,.T.); +#250533 = VERTEX_POINT('',#250534); +#250534 = CARTESIAN_POINT('',(164.828378,-44.821774,1.585)); +#250535 = LINE('',#250536,#250537); +#250536 = CARTESIAN_POINT('',(164.829819,-44.188095,1.585)); +#250537 = VECTOR('',#250538,1.); +#250538 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#250539 = ORIENTED_EDGE('',*,*,#250540,.T.); +#250540 = EDGE_CURVE('',#250533,#250541,#250543,.T.); +#250541 = VERTEX_POINT('',#250542); +#250542 = CARTESIAN_POINT('',(164.769451,-44.880701,1.585)); +#250543 = CIRCLE('',#250544,7.499663284007E-02); +#250544 = AXIS2_PLACEMENT_3D('',#250545,#250546,#250547); +#250545 = CARTESIAN_POINT('',(164.75482198775,-44.80714498775,1.585)); +#250546 = DIRECTION('',(0.,0.,-1.)); +#250547 = DIRECTION('',(0.980790863049,-0.195062254063,0.)); +#250548 = ORIENTED_EDGE('',*,*,#250549,.T.); +#250549 = EDGE_CURVE('',#250541,#250550,#250552,.T.); +#250550 = VERTEX_POINT('',#250551); +#250551 = CARTESIAN_POINT('',(164.732268,-44.877421,1.585)); +#250552 = LINE('',#250553,#250554); +#250553 = CARTESIAN_POINT('',(164.769451,-44.880701,1.585)); +#250554 = VECTOR('',#250555,1.); +#250555 = DIRECTION('',(-0.996131850392,8.787113652183E-02,0.)); +#250556 = ORIENTED_EDGE('',*,*,#250557,.T.); +#250557 = EDGE_CURVE('',#250550,#250558,#250560,.T.); +#250558 = VERTEX_POINT('',#250559); +#250559 = CARTESIAN_POINT('',(164.701786,-44.860175,1.585)); +#250560 = LINE('',#250561,#250562); +#250561 = CARTESIAN_POINT('',(164.732268,-44.877421,1.585)); +#250562 = VECTOR('',#250563,1.); +#250563 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#250564 = ORIENTED_EDGE('',*,*,#250565,.T.); +#250565 = EDGE_CURVE('',#250558,#250566,#250568,.T.); +#250566 = VERTEX_POINT('',#250567); +#250567 = CARTESIAN_POINT('',(164.142876,-44.301266,1.585)); +#250568 = LINE('',#250569,#250570); +#250569 = CARTESIAN_POINT('',(164.701786,-44.860175,1.585)); +#250570 = VECTOR('',#250571,1.); +#250571 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#250572 = ORIENTED_EDGE('',*,*,#250573,.T.); +#250573 = EDGE_CURVE('',#250566,#250574,#250576,.T.); +#250574 = VERTEX_POINT('',#250575); +#250575 = CARTESIAN_POINT('',(164.028363,-44.263095,1.585)); +#250576 = LINE('',#250577,#250578); +#250577 = CARTESIAN_POINT('',(164.142876,-44.301266,1.585)); +#250578 = VECTOR('',#250579,1.); +#250579 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#250580 = ORIENTED_EDGE('',*,*,#250581,.T.); +#250581 = EDGE_CURVE('',#250574,#250582,#250584,.T.); +#250582 = VERTEX_POINT('',#250583); +#250583 = CARTESIAN_POINT('',(163.963,-44.263095,1.585)); +#250584 = LINE('',#250585,#250586); +#250585 = CARTESIAN_POINT('',(164.028363,-44.263095,1.585)); +#250586 = VECTOR('',#250587,1.); +#250587 = DIRECTION('',(-1.,0.,0.)); +#250588 = ORIENTED_EDGE('',*,*,#250589,.T.); +#250589 = EDGE_CURVE('',#250582,#250590,#250592,.T.); +#250590 = VERTEX_POINT('',#250591); +#250591 = CARTESIAN_POINT('',(163.829819,-44.396276,1.585)); +#250592 = CIRCLE('',#250593,0.18686440374); +#250593 = AXIS2_PLACEMENT_3D('',#250594,#250595,#250596); +#250594 = CARTESIAN_POINT('',(164.010536,-44.443812,1.585)); +#250595 = DIRECTION('',(0.,0.,1.)); +#250596 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#250597 = ORIENTED_EDGE('',*,*,#250598,.T.); +#250598 = EDGE_CURVE('',#250590,#250599,#250601,.T.); +#250599 = VERTEX_POINT('',#250600); +#250600 = CARTESIAN_POINT('',(163.829819,-44.598961,1.585)); +#250601 = LINE('',#250602,#250603); +#250602 = CARTESIAN_POINT('',(163.829819,-44.396276,1.585)); +#250603 = VECTOR('',#250604,1.); +#250604 = DIRECTION('',(0.,-1.,0.)); +#250605 = ORIENTED_EDGE('',*,*,#250606,.T.); +#250606 = EDGE_CURVE('',#250599,#250607,#250609,.T.); +#250607 = VERTEX_POINT('',#250608); +#250608 = CARTESIAN_POINT('',(163.864077,-44.667477,1.585)); +#250609 = LINE('',#250610,#250611); +#250610 = CARTESIAN_POINT('',(163.829819,-44.598961,1.585)); +#250611 = VECTOR('',#250612,1.); +#250612 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#250613 = ORIENTED_EDGE('',*,*,#250614,.T.); +#250614 = EDGE_CURVE('',#250607,#250615,#250617,.T.); +#250615 = VERTEX_POINT('',#250616); +#250616 = CARTESIAN_POINT('',(163.912417,-44.717855,1.585)); +#250617 = LINE('',#250618,#250619); +#250618 = CARTESIAN_POINT('',(163.864077,-44.667477,1.585)); +#250619 = VECTOR('',#250620,1.); +#250620 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#250621 = ORIENTED_EDGE('',*,*,#250622,.T.); +#250622 = EDGE_CURVE('',#250615,#250623,#250625,.T.); +#250623 = VERTEX_POINT('',#250624); +#250624 = CARTESIAN_POINT('',(163.797024,-44.812556,1.585)); +#250625 = CIRCLE('',#250626,7.500003178657E-02); +#250626 = AXIS2_PLACEMENT_3D('',#250627,#250628,#250629); +#250627 = CARTESIAN_POINT('',(163.85005656212,-44.7595225,1.585)); +#250628 = DIRECTION('',(0.,0.,-1.)); +#250629 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#250630 = ORIENTED_EDGE('',*,*,#250631,.T.); +#250631 = EDGE_CURVE('',#250623,#250632,#250634,.T.); +#250632 = VERTEX_POINT('',#250633); +#250633 = CARTESIAN_POINT('',(163.735356,-44.745445,1.585)); +#250634 = LINE('',#250635,#250636); +#250635 = CARTESIAN_POINT('',(163.797024,-44.812556,1.585)); +#250636 = VECTOR('',#250637,1.); +#250637 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#250638 = ORIENTED_EDGE('',*,*,#250639,.T.); +#250639 = EDGE_CURVE('',#250632,#250640,#250642,.T.); +#250640 = VERTEX_POINT('',#250641); +#250641 = CARTESIAN_POINT('',(163.744686,-44.236049,1.585)); +#250642 = CIRCLE('',#250643,0.450051227017); +#250643 = AXIS2_PLACEMENT_3D('',#250644,#250645,#250646); +#250644 = CARTESIAN_POINT('',(164.11097532415,-44.49754132866,1.585)); +#250645 = DIRECTION('',(0.,0.,-1.)); +#250646 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#250647 = ORIENTED_EDGE('',*,*,#250648,.T.); +#250648 = EDGE_CURVE('',#250640,#250482,#250649,.T.); +#250649 = LINE('',#250650,#250651); +#250650 = CARTESIAN_POINT('',(163.744686,-44.236049,1.585)); +#250651 = VECTOR('',#250652,1.); +#250652 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#250653 = PLANE('',#250654); +#250654 = AXIS2_PLACEMENT_3D('',#250655,#250656,#250657); +#250655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250656 = DIRECTION('',(0.,0.,1.)); +#250657 = DIRECTION('',(1.,0.,-0.)); +#250658 = SHELL_BASED_SURFACE_MODEL('',(#250659)); +#250659 = OPEN_SHELL('',(#250660)); +#250660 = ADVANCED_FACE('',(#250661),#250722,.T.); +#250661 = FACE_BOUND('',#250662,.F.); +#250662 = EDGE_LOOP('',(#250663,#250674,#250682,#250691,#250699,#250707, + #250716)); +#250663 = ORIENTED_EDGE('',*,*,#250664,.T.); +#250664 = EDGE_CURVE('',#250665,#250667,#250669,.T.); +#250665 = VERTEX_POINT('',#250666); +#250666 = CARTESIAN_POINT('',(95.28165,-43.5731,1.585)); +#250667 = VERTEX_POINT('',#250668); +#250668 = CARTESIAN_POINT('',(95.34165,-43.5131,1.585)); +#250669 = CIRCLE('',#250670,5.999932016258E-02); +#250670 = AXIS2_PLACEMENT_3D('',#250671,#250672,#250673); +#250671 = CARTESIAN_POINT('',(95.341649320159,-43.57309932015,1.585)); +#250672 = DIRECTION('',(0.,0.,-1.)); +#250673 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#250674 = ORIENTED_EDGE('',*,*,#250675,.T.); +#250675 = EDGE_CURVE('',#250667,#250676,#250678,.T.); +#250676 = VERTEX_POINT('',#250677); +#250677 = CARTESIAN_POINT('',(96.59165,-43.5131,1.585)); +#250678 = LINE('',#250679,#250680); +#250679 = CARTESIAN_POINT('',(95.34165,-43.5131,1.585)); +#250680 = VECTOR('',#250681,1.); +#250681 = DIRECTION('',(1.,0.,0.)); +#250682 = ORIENTED_EDGE('',*,*,#250683,.T.); +#250683 = EDGE_CURVE('',#250676,#250684,#250686,.T.); +#250684 = VERTEX_POINT('',#250685); +#250685 = CARTESIAN_POINT('',(96.59165,-43.6331,1.585)); +#250686 = CIRCLE('',#250687,6.000000000042E-02); +#250687 = AXIS2_PLACEMENT_3D('',#250688,#250689,#250690); +#250688 = CARTESIAN_POINT('',(96.591650225588,-43.5731,1.585)); +#250689 = DIRECTION('',(0.,0.,-1.)); +#250690 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#250691 = ORIENTED_EDGE('',*,*,#250692,.T.); +#250692 = EDGE_CURVE('',#250684,#250693,#250695,.T.); +#250693 = VERTEX_POINT('',#250694); +#250694 = CARTESIAN_POINT('',(95.40165,-43.6331,1.585)); +#250695 = LINE('',#250696,#250697); +#250696 = CARTESIAN_POINT('',(96.59165,-43.6331,1.585)); +#250697 = VECTOR('',#250698,1.); +#250698 = DIRECTION('',(-1.,0.,0.)); +#250699 = ORIENTED_EDGE('',*,*,#250700,.T.); +#250700 = EDGE_CURVE('',#250693,#250701,#250703,.T.); +#250701 = VERTEX_POINT('',#250702); +#250702 = CARTESIAN_POINT('',(95.40165,-44.8231,1.585)); +#250703 = LINE('',#250704,#250705); +#250704 = CARTESIAN_POINT('',(95.40165,-43.6331,1.585)); +#250705 = VECTOR('',#250706,1.); +#250706 = DIRECTION('',(0.,-1.,0.)); +#250707 = ORIENTED_EDGE('',*,*,#250708,.T.); +#250708 = EDGE_CURVE('',#250701,#250709,#250711,.T.); +#250709 = VERTEX_POINT('',#250710); +#250710 = CARTESIAN_POINT('',(95.28165,-44.8231,1.585)); +#250711 = CIRCLE('',#250712,6.000000000043E-02); +#250712 = AXIS2_PLACEMENT_3D('',#250713,#250714,#250715); +#250713 = CARTESIAN_POINT('',(95.34165,-44.82310022558,1.585)); +#250714 = DIRECTION('',(0.,0.,-1.)); +#250715 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#250716 = ORIENTED_EDGE('',*,*,#250717,.T.); +#250717 = EDGE_CURVE('',#250709,#250665,#250718,.T.); +#250718 = LINE('',#250719,#250720); +#250719 = CARTESIAN_POINT('',(95.28165,-44.8231,1.585)); +#250720 = VECTOR('',#250721,1.); +#250721 = DIRECTION('',(0.,1.,0.)); +#250722 = PLANE('',#250723); +#250723 = AXIS2_PLACEMENT_3D('',#250724,#250725,#250726); +#250724 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250725 = DIRECTION('',(0.,0.,1.)); +#250726 = DIRECTION('',(1.,0.,-0.)); +#250727 = SHELL_BASED_SURFACE_MODEL('',(#250728)); +#250728 = OPEN_SHELL('',(#250729)); +#250729 = ADVANCED_FACE('',(#250730),#250791,.T.); +#250730 = FACE_BOUND('',#250731,.F.); +#250731 = EDGE_LOOP('',(#250732,#250743,#250751,#250760,#250768,#250776, + #250785)); +#250732 = ORIENTED_EDGE('',*,*,#250733,.T.); +#250733 = EDGE_CURVE('',#250734,#250736,#250738,.T.); +#250734 = VERTEX_POINT('',#250735); +#250735 = CARTESIAN_POINT('',(113.28165,-43.5731,1.585)); +#250736 = VERTEX_POINT('',#250737); +#250737 = CARTESIAN_POINT('',(113.34165,-43.5131,1.585)); +#250738 = CIRCLE('',#250739,5.999932016258E-02); +#250739 = AXIS2_PLACEMENT_3D('',#250740,#250741,#250742); +#250740 = CARTESIAN_POINT('',(113.34164932015,-43.57309932015,1.585)); +#250741 = DIRECTION('',(0.,0.,-1.)); +#250742 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#250743 = ORIENTED_EDGE('',*,*,#250744,.T.); +#250744 = EDGE_CURVE('',#250736,#250745,#250747,.T.); +#250745 = VERTEX_POINT('',#250746); +#250746 = CARTESIAN_POINT('',(114.59165,-43.5131,1.585)); +#250747 = LINE('',#250748,#250749); +#250748 = CARTESIAN_POINT('',(113.34165,-43.5131,1.585)); +#250749 = VECTOR('',#250750,1.); +#250750 = DIRECTION('',(1.,0.,0.)); +#250751 = ORIENTED_EDGE('',*,*,#250752,.T.); +#250752 = EDGE_CURVE('',#250745,#250753,#250755,.T.); +#250753 = VERTEX_POINT('',#250754); +#250754 = CARTESIAN_POINT('',(114.59165,-43.6331,1.585)); +#250755 = CIRCLE('',#250756,6.000000000042E-02); +#250756 = AXIS2_PLACEMENT_3D('',#250757,#250758,#250759); +#250757 = CARTESIAN_POINT('',(114.59165022558,-43.5731,1.585)); +#250758 = DIRECTION('',(0.,0.,-1.)); +#250759 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#250760 = ORIENTED_EDGE('',*,*,#250761,.T.); +#250761 = EDGE_CURVE('',#250753,#250762,#250764,.T.); +#250762 = VERTEX_POINT('',#250763); +#250763 = CARTESIAN_POINT('',(113.40165,-43.6331,1.585)); +#250764 = LINE('',#250765,#250766); +#250765 = CARTESIAN_POINT('',(114.59165,-43.6331,1.585)); +#250766 = VECTOR('',#250767,1.); +#250767 = DIRECTION('',(-1.,0.,0.)); +#250768 = ORIENTED_EDGE('',*,*,#250769,.T.); +#250769 = EDGE_CURVE('',#250762,#250770,#250772,.T.); +#250770 = VERTEX_POINT('',#250771); +#250771 = CARTESIAN_POINT('',(113.40165,-44.8231,1.585)); +#250772 = LINE('',#250773,#250774); +#250773 = CARTESIAN_POINT('',(113.40165,-43.6331,1.585)); +#250774 = VECTOR('',#250775,1.); +#250775 = DIRECTION('',(0.,-1.,0.)); +#250776 = ORIENTED_EDGE('',*,*,#250777,.T.); +#250777 = EDGE_CURVE('',#250770,#250778,#250780,.T.); +#250778 = VERTEX_POINT('',#250779); +#250779 = CARTESIAN_POINT('',(113.28165,-44.8231,1.585)); +#250780 = CIRCLE('',#250781,6.000000000043E-02); +#250781 = AXIS2_PLACEMENT_3D('',#250782,#250783,#250784); +#250782 = CARTESIAN_POINT('',(113.34165,-44.82310022558,1.585)); +#250783 = DIRECTION('',(0.,0.,-1.)); +#250784 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#250785 = ORIENTED_EDGE('',*,*,#250786,.T.); +#250786 = EDGE_CURVE('',#250778,#250734,#250787,.T.); +#250787 = LINE('',#250788,#250789); +#250788 = CARTESIAN_POINT('',(113.28165,-44.8231,1.585)); +#250789 = VECTOR('',#250790,1.); +#250790 = DIRECTION('',(0.,1.,0.)); +#250791 = PLANE('',#250792); +#250792 = AXIS2_PLACEMENT_3D('',#250793,#250794,#250795); +#250793 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250794 = DIRECTION('',(0.,0.,1.)); +#250795 = DIRECTION('',(1.,0.,-0.)); +#250796 = SHELL_BASED_SURFACE_MODEL('',(#250797)); +#250797 = OPEN_SHELL('',(#250798)); +#250798 = ADVANCED_FACE('',(#250799),#250860,.T.); +#250799 = FACE_BOUND('',#250800,.F.); +#250800 = EDGE_LOOP('',(#250801,#250812,#250820,#250829,#250837,#250845, + #250854)); +#250801 = ORIENTED_EDGE('',*,*,#250802,.T.); +#250802 = EDGE_CURVE('',#250803,#250805,#250807,.T.); +#250803 = VERTEX_POINT('',#250804); +#250804 = CARTESIAN_POINT('',(124.28165,-43.5731,1.585)); +#250805 = VERTEX_POINT('',#250806); +#250806 = CARTESIAN_POINT('',(124.34165,-43.5131,1.585)); +#250807 = CIRCLE('',#250808,5.999932016258E-02); +#250808 = AXIS2_PLACEMENT_3D('',#250809,#250810,#250811); +#250809 = CARTESIAN_POINT('',(124.34164932015,-43.57309932015,1.585)); +#250810 = DIRECTION('',(0.,0.,-1.)); +#250811 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#250812 = ORIENTED_EDGE('',*,*,#250813,.T.); +#250813 = EDGE_CURVE('',#250805,#250814,#250816,.T.); +#250814 = VERTEX_POINT('',#250815); +#250815 = CARTESIAN_POINT('',(125.59165,-43.5131,1.585)); +#250816 = LINE('',#250817,#250818); +#250817 = CARTESIAN_POINT('',(124.34165,-43.5131,1.585)); +#250818 = VECTOR('',#250819,1.); +#250819 = DIRECTION('',(1.,0.,0.)); +#250820 = ORIENTED_EDGE('',*,*,#250821,.T.); +#250821 = EDGE_CURVE('',#250814,#250822,#250824,.T.); +#250822 = VERTEX_POINT('',#250823); +#250823 = CARTESIAN_POINT('',(125.59165,-43.6331,1.585)); +#250824 = CIRCLE('',#250825,6.000000000042E-02); +#250825 = AXIS2_PLACEMENT_3D('',#250826,#250827,#250828); +#250826 = CARTESIAN_POINT('',(125.59165022558,-43.5731,1.585)); +#250827 = DIRECTION('',(0.,0.,-1.)); +#250828 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#250829 = ORIENTED_EDGE('',*,*,#250830,.T.); +#250830 = EDGE_CURVE('',#250822,#250831,#250833,.T.); +#250831 = VERTEX_POINT('',#250832); +#250832 = CARTESIAN_POINT('',(124.40165,-43.6331,1.585)); +#250833 = LINE('',#250834,#250835); +#250834 = CARTESIAN_POINT('',(125.59165,-43.6331,1.585)); +#250835 = VECTOR('',#250836,1.); +#250836 = DIRECTION('',(-1.,0.,0.)); +#250837 = ORIENTED_EDGE('',*,*,#250838,.T.); +#250838 = EDGE_CURVE('',#250831,#250839,#250841,.T.); +#250839 = VERTEX_POINT('',#250840); +#250840 = CARTESIAN_POINT('',(124.40165,-44.8231,1.585)); +#250841 = LINE('',#250842,#250843); +#250842 = CARTESIAN_POINT('',(124.40165,-43.6331,1.585)); +#250843 = VECTOR('',#250844,1.); +#250844 = DIRECTION('',(0.,-1.,0.)); +#250845 = ORIENTED_EDGE('',*,*,#250846,.T.); +#250846 = EDGE_CURVE('',#250839,#250847,#250849,.T.); +#250847 = VERTEX_POINT('',#250848); +#250848 = CARTESIAN_POINT('',(124.28165,-44.8231,1.585)); +#250849 = CIRCLE('',#250850,6.000000000043E-02); +#250850 = AXIS2_PLACEMENT_3D('',#250851,#250852,#250853); +#250851 = CARTESIAN_POINT('',(124.34165,-44.82310022558,1.585)); +#250852 = DIRECTION('',(0.,0.,-1.)); +#250853 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#250854 = ORIENTED_EDGE('',*,*,#250855,.T.); +#250855 = EDGE_CURVE('',#250847,#250803,#250856,.T.); +#250856 = LINE('',#250857,#250858); +#250857 = CARTESIAN_POINT('',(124.28165,-44.8231,1.585)); +#250858 = VECTOR('',#250859,1.); +#250859 = DIRECTION('',(0.,1.,0.)); +#250860 = PLANE('',#250861); +#250861 = AXIS2_PLACEMENT_3D('',#250862,#250863,#250864); +#250862 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250863 = DIRECTION('',(0.,0.,1.)); +#250864 = DIRECTION('',(1.,0.,-0.)); +#250865 = SHELL_BASED_SURFACE_MODEL('',(#250866)); +#250866 = OPEN_SHELL('',(#250867)); +#250867 = ADVANCED_FACE('',(#250868),#250929,.T.); +#250868 = FACE_BOUND('',#250869,.F.); +#250869 = EDGE_LOOP('',(#250870,#250881,#250889,#250898,#250906,#250914, + #250923)); +#250870 = ORIENTED_EDGE('',*,*,#250871,.T.); +#250871 = EDGE_CURVE('',#250872,#250874,#250876,.T.); +#250872 = VERTEX_POINT('',#250873); +#250873 = CARTESIAN_POINT('',(132.88165,-43.5731,1.585)); +#250874 = VERTEX_POINT('',#250875); +#250875 = CARTESIAN_POINT('',(132.94165,-43.5131,1.585)); +#250876 = CIRCLE('',#250877,5.999932016251E-02); +#250877 = AXIS2_PLACEMENT_3D('',#250878,#250879,#250880); +#250878 = CARTESIAN_POINT('',(132.94164932015,-43.57309932015,1.585)); +#250879 = DIRECTION('',(0.,0.,-1.)); +#250880 = DIRECTION('',(-0.999999999936,-1.133081695042E-05,-0.)); +#250881 = ORIENTED_EDGE('',*,*,#250882,.T.); +#250882 = EDGE_CURVE('',#250874,#250883,#250885,.T.); +#250883 = VERTEX_POINT('',#250884); +#250884 = CARTESIAN_POINT('',(134.19165,-43.5131,1.585)); +#250885 = LINE('',#250886,#250887); +#250886 = CARTESIAN_POINT('',(132.94165,-43.5131,1.585)); +#250887 = VECTOR('',#250888,1.); +#250888 = DIRECTION('',(1.,0.,0.)); +#250889 = ORIENTED_EDGE('',*,*,#250890,.T.); +#250890 = EDGE_CURVE('',#250883,#250891,#250893,.T.); +#250891 = VERTEX_POINT('',#250892); +#250892 = CARTESIAN_POINT('',(134.19165,-43.6331,1.585)); +#250893 = CIRCLE('',#250894,6.000000000042E-02); +#250894 = AXIS2_PLACEMENT_3D('',#250895,#250896,#250897); +#250895 = CARTESIAN_POINT('',(134.19165022558,-43.5731,1.585)); +#250896 = DIRECTION('',(0.,0.,-1.)); +#250897 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#250898 = ORIENTED_EDGE('',*,*,#250899,.T.); +#250899 = EDGE_CURVE('',#250891,#250900,#250902,.T.); +#250900 = VERTEX_POINT('',#250901); +#250901 = CARTESIAN_POINT('',(133.00165,-43.6331,1.585)); +#250902 = LINE('',#250903,#250904); +#250903 = CARTESIAN_POINT('',(134.19165,-43.6331,1.585)); +#250904 = VECTOR('',#250905,1.); +#250905 = DIRECTION('',(-1.,0.,0.)); +#250906 = ORIENTED_EDGE('',*,*,#250907,.T.); +#250907 = EDGE_CURVE('',#250900,#250908,#250910,.T.); +#250908 = VERTEX_POINT('',#250909); +#250909 = CARTESIAN_POINT('',(133.00165,-44.8231,1.585)); +#250910 = LINE('',#250911,#250912); +#250911 = CARTESIAN_POINT('',(133.00165,-43.6331,1.585)); +#250912 = VECTOR('',#250913,1.); +#250913 = DIRECTION('',(0.,-1.,0.)); +#250914 = ORIENTED_EDGE('',*,*,#250915,.T.); +#250915 = EDGE_CURVE('',#250908,#250916,#250918,.T.); +#250916 = VERTEX_POINT('',#250917); +#250917 = CARTESIAN_POINT('',(132.88165,-44.8231,1.585)); +#250918 = CIRCLE('',#250919,6.000000000042E-02); +#250919 = AXIS2_PLACEMENT_3D('',#250920,#250921,#250922); +#250920 = CARTESIAN_POINT('',(132.94165,-44.82310022558,1.585)); +#250921 = DIRECTION('',(0.,0.,-1.)); +#250922 = DIRECTION('',(0.999999999993,3.759793898414E-06,0.)); +#250923 = ORIENTED_EDGE('',*,*,#250924,.T.); +#250924 = EDGE_CURVE('',#250916,#250872,#250925,.T.); +#250925 = LINE('',#250926,#250927); +#250926 = CARTESIAN_POINT('',(132.88165,-44.8231,1.585)); +#250927 = VECTOR('',#250928,1.); +#250928 = DIRECTION('',(0.,1.,0.)); +#250929 = PLANE('',#250930); +#250930 = AXIS2_PLACEMENT_3D('',#250931,#250932,#250933); +#250931 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250932 = DIRECTION('',(0.,0.,1.)); +#250933 = DIRECTION('',(1.,0.,-0.)); +#250934 = SHELL_BASED_SURFACE_MODEL('',(#250935)); +#250935 = OPEN_SHELL('',(#250936)); +#250936 = ADVANCED_FACE('',(#250937),#250973,.T.); +#250937 = FACE_BOUND('',#250938,.F.); +#250938 = EDGE_LOOP('',(#250939,#250950,#250958,#250967)); +#250939 = ORIENTED_EDGE('',*,*,#250940,.T.); +#250940 = EDGE_CURVE('',#250941,#250943,#250945,.T.); +#250941 = VERTEX_POINT('',#250942); +#250942 = CARTESIAN_POINT('',(168.27607,-44.8731,1.585)); +#250943 = VERTEX_POINT('',#250944); +#250944 = CARTESIAN_POINT('',(168.27607,-44.7531,1.585)); +#250945 = CIRCLE('',#250946,6.000000000042E-02); +#250946 = AXIS2_PLACEMENT_3D('',#250947,#250948,#250949); +#250947 = CARTESIAN_POINT('',(168.27606977441,-44.8131,1.585)); +#250948 = DIRECTION('',(0.,0.,-1.)); +#250949 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#250950 = ORIENTED_EDGE('',*,*,#250951,.T.); +#250951 = EDGE_CURVE('',#250943,#250952,#250954,.T.); +#250952 = VERTEX_POINT('',#250953); +#250953 = CARTESIAN_POINT('',(168.55723,-44.7531,1.585)); +#250954 = LINE('',#250955,#250956); +#250955 = CARTESIAN_POINT('',(168.27607,-44.7531,1.585)); +#250956 = VECTOR('',#250957,1.); +#250957 = DIRECTION('',(1.,0.,0.)); +#250958 = ORIENTED_EDGE('',*,*,#250959,.T.); +#250959 = EDGE_CURVE('',#250952,#250960,#250962,.T.); +#250960 = VERTEX_POINT('',#250961); +#250961 = CARTESIAN_POINT('',(168.55723,-44.8731,1.585)); +#250962 = CIRCLE('',#250963,6.000000000043E-02); +#250963 = AXIS2_PLACEMENT_3D('',#250964,#250965,#250966); +#250964 = CARTESIAN_POINT('',(168.55723022558,-44.8131,1.585)); +#250965 = DIRECTION('',(0.,0.,-1.)); +#250966 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250967 = ORIENTED_EDGE('',*,*,#250968,.T.); +#250968 = EDGE_CURVE('',#250960,#250941,#250969,.T.); +#250969 = LINE('',#250970,#250971); +#250970 = CARTESIAN_POINT('',(168.55723,-44.8731,1.585)); +#250971 = VECTOR('',#250972,1.); +#250972 = DIRECTION('',(-1.,0.,0.)); +#250973 = PLANE('',#250974); +#250974 = AXIS2_PLACEMENT_3D('',#250975,#250976,#250977); +#250975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250976 = DIRECTION('',(0.,0.,1.)); +#250977 = DIRECTION('',(1.,0.,-0.)); +#250978 = SHELL_BASED_SURFACE_MODEL('',(#250979)); +#250979 = OPEN_SHELL('',(#250980)); +#250980 = ADVANCED_FACE('',(#250981),#251017,.T.); +#250981 = FACE_BOUND('',#250982,.F.); +#250982 = EDGE_LOOP('',(#250983,#250994,#251002,#251011)); +#250983 = ORIENTED_EDGE('',*,*,#250984,.T.); +#250984 = EDGE_CURVE('',#250985,#250987,#250989,.T.); +#250985 = VERTEX_POINT('',#250986); +#250986 = CARTESIAN_POINT('',(173.629392,-44.8606,1.585)); +#250987 = VERTEX_POINT('',#250988); +#250988 = CARTESIAN_POINT('',(173.629392,-44.7406,1.585)); +#250989 = CIRCLE('',#250990,6.000000000042E-02); +#250990 = AXIS2_PLACEMENT_3D('',#250991,#250992,#250993); +#250991 = CARTESIAN_POINT('',(173.62939177441,-44.8006,1.585)); +#250992 = DIRECTION('',(0.,0.,-1.)); +#250993 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#250994 = ORIENTED_EDGE('',*,*,#250995,.T.); +#250995 = EDGE_CURVE('',#250987,#250996,#250998,.T.); +#250996 = VERTEX_POINT('',#250997); +#250997 = CARTESIAN_POINT('',(174.103908,-44.7406,1.585)); +#250998 = LINE('',#250999,#251000); +#250999 = CARTESIAN_POINT('',(173.629392,-44.7406,1.585)); +#251000 = VECTOR('',#251001,1.); +#251001 = DIRECTION('',(1.,0.,0.)); +#251002 = ORIENTED_EDGE('',*,*,#251003,.T.); +#251003 = EDGE_CURVE('',#250996,#251004,#251006,.T.); +#251004 = VERTEX_POINT('',#251005); +#251005 = CARTESIAN_POINT('',(174.103908,-44.8606,1.585)); +#251006 = CIRCLE('',#251007,6.000000000043E-02); +#251007 = AXIS2_PLACEMENT_3D('',#251008,#251009,#251010); +#251008 = CARTESIAN_POINT('',(174.10390822558,-44.8006,1.585)); +#251009 = DIRECTION('',(0.,0.,-1.)); +#251010 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#251011 = ORIENTED_EDGE('',*,*,#251012,.T.); +#251012 = EDGE_CURVE('',#251004,#250985,#251013,.T.); +#251013 = LINE('',#251014,#251015); +#251014 = CARTESIAN_POINT('',(174.103908,-44.8606,1.585)); +#251015 = VECTOR('',#251016,1.); +#251016 = DIRECTION('',(-1.,0.,0.)); +#251017 = PLANE('',#251018); +#251018 = AXIS2_PLACEMENT_3D('',#251019,#251020,#251021); +#251019 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251020 = DIRECTION('',(0.,0.,1.)); +#251021 = DIRECTION('',(1.,0.,-0.)); +#251022 = SHELL_BASED_SURFACE_MODEL('',(#251023)); +#251023 = OPEN_SHELL('',(#251024)); +#251024 = ADVANCED_FACE('',(#251025),#251061,.T.); +#251025 = FACE_BOUND('',#251026,.F.); +#251026 = EDGE_LOOP('',(#251027,#251038,#251046,#251055)); +#251027 = ORIENTED_EDGE('',*,*,#251028,.T.); +#251028 = EDGE_CURVE('',#251029,#251031,#251033,.T.); +#251029 = VERTEX_POINT('',#251030); +#251030 = CARTESIAN_POINT('',(176.854392,-44.8606,1.585)); +#251031 = VERTEX_POINT('',#251032); +#251032 = CARTESIAN_POINT('',(176.854392,-44.7406,1.585)); +#251033 = CIRCLE('',#251034,6.000000000042E-02); +#251034 = AXIS2_PLACEMENT_3D('',#251035,#251036,#251037); +#251035 = CARTESIAN_POINT('',(176.85439177441,-44.8006,1.585)); +#251036 = DIRECTION('',(0.,0.,-1.)); +#251037 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#251038 = ORIENTED_EDGE('',*,*,#251039,.T.); +#251039 = EDGE_CURVE('',#251031,#251040,#251042,.T.); +#251040 = VERTEX_POINT('',#251041); +#251041 = CARTESIAN_POINT('',(177.328908,-44.7406,1.585)); +#251042 = LINE('',#251043,#251044); +#251043 = CARTESIAN_POINT('',(176.854392,-44.7406,1.585)); +#251044 = VECTOR('',#251045,1.); +#251045 = DIRECTION('',(1.,0.,0.)); +#251046 = ORIENTED_EDGE('',*,*,#251047,.T.); +#251047 = EDGE_CURVE('',#251040,#251048,#251050,.T.); +#251048 = VERTEX_POINT('',#251049); +#251049 = CARTESIAN_POINT('',(177.328908,-44.8606,1.585)); +#251050 = CIRCLE('',#251051,6.000000000043E-02); +#251051 = AXIS2_PLACEMENT_3D('',#251052,#251053,#251054); +#251052 = CARTESIAN_POINT('',(177.32890822558,-44.8006,1.585)); +#251053 = DIRECTION('',(0.,0.,-1.)); +#251054 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#251055 = ORIENTED_EDGE('',*,*,#251056,.T.); +#251056 = EDGE_CURVE('',#251048,#251029,#251057,.T.); +#251057 = LINE('',#251058,#251059); +#251058 = CARTESIAN_POINT('',(177.328908,-44.8606,1.585)); +#251059 = VECTOR('',#251060,1.); +#251060 = DIRECTION('',(-1.,0.,0.)); +#251061 = PLANE('',#251062); +#251062 = AXIS2_PLACEMENT_3D('',#251063,#251064,#251065); +#251063 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251064 = DIRECTION('',(0.,0.,1.)); +#251065 = DIRECTION('',(1.,0.,-0.)); +#251066 = SHELL_BASED_SURFACE_MODEL('',(#251067)); +#251067 = OPEN_SHELL('',(#251068)); +#251068 = ADVANCED_FACE('',(#251069),#251254,.T.); +#251069 = FACE_BOUND('',#251070,.F.); +#251070 = EDGE_LOOP('',(#251071,#251082,#251090,#251099,#251107,#251116, + #251124,#251132,#251140,#251149,#251157,#251166,#251174,#251183, + #251191,#251199,#251207,#251215,#251223,#251231,#251239,#251248)); +#251071 = ORIENTED_EDGE('',*,*,#251072,.T.); +#251072 = EDGE_CURVE('',#251073,#251075,#251077,.T.); +#251073 = VERTEX_POINT('',#251074); +#251074 = CARTESIAN_POINT('',(156.608389,-44.054306,1.585)); +#251075 = VERTEX_POINT('',#251076); +#251076 = CARTESIAN_POINT('',(156.70309,-44.169699,1.585)); +#251077 = CIRCLE('',#251078,7.500003178656E-02); +#251078 = AXIS2_PLACEMENT_3D('',#251079,#251080,#251081); +#251079 = CARTESIAN_POINT('',(156.6500565,-44.11666643787,1.585)); +#251080 = DIRECTION('',(0.,0.,-1.)); +#251081 = DIRECTION('',(-0.555566431206,0.83147215258,0.)); +#251082 = ORIENTED_EDGE('',*,*,#251083,.T.); +#251083 = EDGE_CURVE('',#251075,#251084,#251086,.T.); +#251084 = VERTEX_POINT('',#251085); +#251085 = CARTESIAN_POINT('',(156.66799,-44.204798,1.585)); +#251086 = LINE('',#251087,#251088); +#251087 = CARTESIAN_POINT('',(156.70309,-44.169699,1.585)); +#251088 = VECTOR('',#251089,1.); +#251089 = DIRECTION('',(-0.707116854005,-0.707096708225,0.)); +#251090 = ORIENTED_EDGE('',*,*,#251091,.T.); +#251091 = EDGE_CURVE('',#251084,#251092,#251094,.T.); +#251092 = VERTEX_POINT('',#251093); +#251093 = CARTESIAN_POINT('',(156.66799,-44.504723,1.585)); +#251094 = CIRCLE('',#251095,0.299310989749); +#251095 = AXIS2_PLACEMENT_3D('',#251096,#251097,#251098); +#251096 = CARTESIAN_POINT('',(156.92702342868,-44.3547605,1.585)); +#251097 = DIRECTION('',(0.,0.,1.)); +#251098 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#251099 = ORIENTED_EDGE('',*,*,#251100,.T.); +#251100 = EDGE_CURVE('',#251092,#251101,#251103,.T.); +#251101 = VERTEX_POINT('',#251102); +#251102 = CARTESIAN_POINT('',(156.742103,-44.578836,1.585)); +#251103 = LINE('',#251104,#251105); +#251104 = CARTESIAN_POINT('',(156.66799,-44.504723,1.585)); +#251105 = VECTOR('',#251106,1.); +#251106 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#251107 = ORIENTED_EDGE('',*,*,#251108,.T.); +#251108 = EDGE_CURVE('',#251101,#251109,#251111,.T.); +#251109 = VERTEX_POINT('',#251110); +#251110 = CARTESIAN_POINT('',(157.117013,-44.660713,1.585)); +#251111 = CIRCLE('',#251112,0.611738044646); +#251112 = AXIS2_PLACEMENT_3D('',#251113,#251114,#251115); +#251113 = CARTESIAN_POINT('',(157.05349337395,-44.05228166256,1.585)); +#251114 = DIRECTION('',(0.,0.,1.)); +#251115 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#251116 = ORIENTED_EDGE('',*,*,#251117,.T.); +#251117 = EDGE_CURVE('',#251109,#251118,#251120,.T.); +#251118 = VERTEX_POINT('',#251119); +#251119 = CARTESIAN_POINT('',(157.290547,-44.617329,1.585)); +#251120 = LINE('',#251121,#251122); +#251121 = CARTESIAN_POINT('',(157.117013,-44.660713,1.585)); +#251122 = VECTOR('',#251123,1.); +#251123 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#251124 = ORIENTED_EDGE('',*,*,#251125,.T.); +#251125 = EDGE_CURVE('',#251118,#251126,#251128,.T.); +#251126 = VERTEX_POINT('',#251127); +#251127 = CARTESIAN_POINT('',(157.367534,-44.578835,1.585)); +#251128 = LINE('',#251129,#251130); +#251129 = CARTESIAN_POINT('',(157.290547,-44.617329,1.585)); +#251130 = VECTOR('',#251131,1.); +#251131 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#251132 = ORIENTED_EDGE('',*,*,#251133,.T.); +#251133 = EDGE_CURVE('',#251126,#251134,#251136,.T.); +#251134 = VERTEX_POINT('',#251135); +#251135 = CARTESIAN_POINT('',(157.441648,-44.504722,1.585)); +#251136 = LINE('',#251137,#251138); +#251137 = CARTESIAN_POINT('',(157.367534,-44.578835,1.585)); +#251138 = VECTOR('',#251139,1.); +#251139 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#251140 = ORIENTED_EDGE('',*,*,#251141,.T.); +#251141 = EDGE_CURVE('',#251134,#251142,#251144,.T.); +#251142 = VERTEX_POINT('',#251143); +#251143 = CARTESIAN_POINT('',(157.441648,-44.204799,1.585)); +#251144 = CIRCLE('',#251145,0.299306284995); +#251145 = AXIS2_PLACEMENT_3D('',#251146,#251147,#251148); +#251146 = CARTESIAN_POINT('',(157.18261942868,-44.3547605,1.585)); +#251147 = DIRECTION('',(0.,-0.,1.)); +#251148 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#251149 = ORIENTED_EDGE('',*,*,#251150,.T.); +#251150 = EDGE_CURVE('',#251142,#251151,#251153,.T.); +#251151 = VERTEX_POINT('',#251152); +#251152 = CARTESIAN_POINT('',(157.39722,-44.158334,1.585)); +#251153 = LINE('',#251154,#251155); +#251154 = CARTESIAN_POINT('',(157.441648,-44.204799,1.585)); +#251155 = VECTOR('',#251156,1.); +#251156 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#251157 = ORIENTED_EDGE('',*,*,#251158,.T.); +#251158 = EDGE_CURVE('',#251151,#251159,#251161,.T.); +#251159 = VERTEX_POINT('',#251160); +#251160 = CARTESIAN_POINT('',(157.512612,-44.063632,1.585)); +#251161 = CIRCLE('',#251162,7.499993690526E-02); +#251162 = AXIS2_PLACEMENT_3D('',#251163,#251164,#251165); +#251163 = CARTESIAN_POINT('',(157.45957982375,-44.11666575169,1.585)); +#251164 = DIRECTION('',(0.,0.,-1.)); +#251165 = DIRECTION('',(-0.831465016204,-0.555577111505,-0.)); +#251166 = ORIENTED_EDGE('',*,*,#251167,.T.); +#251167 = EDGE_CURVE('',#251159,#251168,#251170,.T.); +#251168 = VERTEX_POINT('',#251169); +#251169 = CARTESIAN_POINT('',(157.572357,-44.127142,1.585)); +#251170 = LINE('',#251171,#251172); +#251171 = CARTESIAN_POINT('',(157.512612,-44.063632,1.585)); +#251172 = VECTOR('',#251173,1.); +#251173 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#251174 = ORIENTED_EDGE('',*,*,#251175,.T.); +#251175 = EDGE_CURVE('',#251168,#251176,#251178,.T.); +#251176 = VERTEX_POINT('',#251177); +#251177 = CARTESIAN_POINT('',(157.569561,-44.586905,1.585)); +#251178 = CIRCLE('',#251179,0.461068563463); +#251179 = AXIS2_PLACEMENT_3D('',#251180,#251181,#251182); +#251180 = CARTESIAN_POINT('',(157.17129557362,-44.35459298919,1.585)); +#251181 = DIRECTION('',(0.,0.,-1.)); +#251182 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#251183 = ORIENTED_EDGE('',*,*,#251184,.T.); +#251184 = EDGE_CURVE('',#251176,#251185,#251187,.T.); +#251185 = VERTEX_POINT('',#251186); +#251186 = CARTESIAN_POINT('',(157.451798,-44.703593,1.585)); +#251187 = LINE('',#251188,#251189); +#251188 = CARTESIAN_POINT('',(157.569561,-44.586905,1.585)); +#251189 = VECTOR('',#251190,1.); +#251190 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#251191 = ORIENTED_EDGE('',*,*,#251192,.T.); +#251192 = EDGE_CURVE('',#251185,#251193,#251195,.T.); +#251193 = VERTEX_POINT('',#251194); +#251194 = CARTESIAN_POINT('',(157.334913,-44.760855,1.585)); +#251195 = LINE('',#251196,#251197); +#251196 = CARTESIAN_POINT('',(157.451798,-44.703593,1.585)); +#251197 = VECTOR('',#251198,1.); +#251198 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#251199 = ORIENTED_EDGE('',*,*,#251200,.T.); +#251200 = EDGE_CURVE('',#251193,#251201,#251203,.T.); +#251201 = VERTEX_POINT('',#251202); +#251202 = CARTESIAN_POINT('',(157.126247,-44.810713,1.585)); +#251203 = LINE('',#251204,#251205); +#251204 = CARTESIAN_POINT('',(157.334913,-44.760855,1.585)); +#251205 = VECTOR('',#251206,1.); +#251206 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#251207 = ORIENTED_EDGE('',*,*,#251208,.T.); +#251208 = EDGE_CURVE('',#251201,#251209,#251211,.T.); +#251209 = VERTEX_POINT('',#251210); +#251210 = CARTESIAN_POINT('',(156.9652,-44.808474,1.585)); +#251211 = LINE('',#251212,#251213); +#251212 = CARTESIAN_POINT('',(157.126247,-44.810713,1.585)); +#251213 = VECTOR('',#251214,1.); +#251214 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#251215 = ORIENTED_EDGE('',*,*,#251216,.T.); +#251216 = EDGE_CURVE('',#251209,#251217,#251219,.T.); +#251217 = VERTEX_POINT('',#251218); +#251218 = CARTESIAN_POINT('',(156.759373,-44.755176,1.585)); +#251219 = LINE('',#251220,#251221); +#251220 = CARTESIAN_POINT('',(156.9652,-44.808474,1.585)); +#251221 = VECTOR('',#251222,1.); +#251222 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#251223 = ORIENTED_EDGE('',*,*,#251224,.T.); +#251224 = EDGE_CURVE('',#251217,#251225,#251227,.T.); +#251225 = VERTEX_POINT('',#251226); +#251226 = CARTESIAN_POINT('',(156.650393,-44.698228,1.585)); +#251227 = LINE('',#251228,#251229); +#251228 = CARTESIAN_POINT('',(156.759373,-44.755176,1.585)); +#251229 = VECTOR('',#251230,1.); +#251230 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#251231 = ORIENTED_EDGE('',*,*,#251232,.T.); +#251232 = EDGE_CURVE('',#251225,#251233,#251235,.T.); +#251233 = VERTEX_POINT('',#251234); +#251234 = CARTESIAN_POINT('',(156.537281,-44.582379,1.585)); +#251235 = LINE('',#251236,#251237); +#251236 = CARTESIAN_POINT('',(156.650393,-44.698228,1.585)); +#251237 = VECTOR('',#251238,1.); +#251238 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#251239 = ORIENTED_EDGE('',*,*,#251240,.T.); +#251240 = EDGE_CURVE('',#251233,#251241,#251243,.T.); +#251241 = VERTEX_POINT('',#251242); +#251242 = CARTESIAN_POINT('',(156.540078,-44.122617,1.585)); +#251243 = CIRCLE('',#251244,0.461058290907); +#251244 = AXIS2_PLACEMENT_3D('',#251245,#251246,#251247); +#251245 = CARTESIAN_POINT('',(156.93833135644,-44.35492931499,1.585)); +#251246 = DIRECTION('',(0.,0.,-1.)); +#251247 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#251248 = ORIENTED_EDGE('',*,*,#251249,.T.); +#251249 = EDGE_CURVE('',#251241,#251073,#251250,.T.); +#251250 = LINE('',#251251,#251252); +#251251 = CARTESIAN_POINT('',(156.540078,-44.122617,1.585)); +#251252 = VECTOR('',#251253,1.); +#251253 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251254 = PLANE('',#251255); +#251255 = AXIS2_PLACEMENT_3D('',#251256,#251257,#251258); +#251256 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251257 = DIRECTION('',(0.,0.,1.)); +#251258 = DIRECTION('',(1.,0.,-0.)); +#251259 = SHELL_BASED_SURFACE_MODEL('',(#251260)); +#251260 = OPEN_SHELL('',(#251261)); +#251261 = ADVANCED_FACE('',(#251262),#251298,.T.); +#251262 = FACE_BOUND('',#251263,.F.); +#251263 = EDGE_LOOP('',(#251264,#251275,#251283,#251292)); +#251264 = ORIENTED_EDGE('',*,*,#251265,.T.); +#251265 = EDGE_CURVE('',#251266,#251268,#251270,.T.); +#251266 = VERTEX_POINT('',#251267); +#251267 = CARTESIAN_POINT('',(145.805398,-44.6731,1.585)); +#251268 = VERTEX_POINT('',#251269); +#251269 = CARTESIAN_POINT('',(145.805398,-44.5531,1.585)); +#251270 = CIRCLE('',#251271,6.000000000042E-02); +#251271 = AXIS2_PLACEMENT_3D('',#251272,#251273,#251274); +#251272 = CARTESIAN_POINT('',(145.80539777441,-44.6131,1.585)); +#251273 = DIRECTION('',(0.,0.,-1.)); +#251274 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#251275 = ORIENTED_EDGE('',*,*,#251276,.T.); +#251276 = EDGE_CURVE('',#251268,#251277,#251279,.T.); +#251277 = VERTEX_POINT('',#251278); +#251278 = CARTESIAN_POINT('',(148.577902,-44.5531,1.585)); +#251279 = LINE('',#251280,#251281); +#251280 = CARTESIAN_POINT('',(145.805398,-44.5531,1.585)); +#251281 = VECTOR('',#251282,1.); +#251282 = DIRECTION('',(1.,0.,0.)); +#251283 = ORIENTED_EDGE('',*,*,#251284,.T.); +#251284 = EDGE_CURVE('',#251277,#251285,#251287,.T.); +#251285 = VERTEX_POINT('',#251286); +#251286 = CARTESIAN_POINT('',(148.577902,-44.6731,1.585)); +#251287 = CIRCLE('',#251288,6.000000000043E-02); +#251288 = AXIS2_PLACEMENT_3D('',#251289,#251290,#251291); +#251289 = CARTESIAN_POINT('',(148.57790222558,-44.6131,1.585)); +#251290 = DIRECTION('',(0.,0.,-1.)); +#251291 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#251292 = ORIENTED_EDGE('',*,*,#251293,.T.); +#251293 = EDGE_CURVE('',#251285,#251266,#251294,.T.); +#251294 = LINE('',#251295,#251296); +#251295 = CARTESIAN_POINT('',(148.577902,-44.6731,1.585)); +#251296 = VECTOR('',#251297,1.); +#251297 = DIRECTION('',(-1.,0.,0.)); +#251298 = PLANE('',#251299); +#251299 = AXIS2_PLACEMENT_3D('',#251300,#251301,#251302); +#251300 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251301 = DIRECTION('',(0.,0.,1.)); +#251302 = DIRECTION('',(1.,0.,-0.)); +#251303 = SHELL_BASED_SURFACE_MODEL('',(#251304)); +#251304 = OPEN_SHELL('',(#251305)); +#251305 = ADVANCED_FACE('',(#251306),#251424,.T.); +#251306 = FACE_BOUND('',#251307,.F.); +#251307 = EDGE_LOOP('',(#251308,#251319,#251327,#251335,#251343,#251352, + #251360,#251369,#251377,#251385,#251393,#251402,#251410,#251418)); +#251308 = ORIENTED_EDGE('',*,*,#251309,.T.); +#251309 = EDGE_CURVE('',#251310,#251312,#251314,.T.); +#251310 = VERTEX_POINT('',#251311); +#251311 = CARTESIAN_POINT('',(110.388077,-43.335559,1.585)); +#251312 = VERTEX_POINT('',#251313); +#251313 = CARTESIAN_POINT('',(110.504745,-43.397919,1.585)); +#251314 = CIRCLE('',#251315,7.500000000003E-02); +#251315 = AXIS2_PLACEMENT_3D('',#251316,#251317,#251318); +#251316 = CARTESIAN_POINT('',(110.429745,-43.39791906555,1.585)); +#251317 = DIRECTION('',(0.,0.,-1.)); +#251318 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#251319 = ORIENTED_EDGE('',*,*,#251320,.T.); +#251320 = EDGE_CURVE('',#251312,#251321,#251323,.T.); +#251321 = VERTEX_POINT('',#251322); +#251322 = CARTESIAN_POINT('',(110.504745,-43.799109,1.585)); +#251323 = LINE('',#251324,#251325); +#251324 = CARTESIAN_POINT('',(110.504745,-43.397919,1.585)); +#251325 = VECTOR('',#251326,1.); +#251326 = DIRECTION('',(0.,-1.,0.)); +#251327 = ORIENTED_EDGE('',*,*,#251328,.T.); +#251328 = EDGE_CURVE('',#251321,#251329,#251331,.T.); +#251329 = VERTEX_POINT('',#251330); +#251330 = CARTESIAN_POINT('',(110.926173,-43.799109,1.585)); +#251331 = LINE('',#251332,#251333); +#251332 = CARTESIAN_POINT('',(110.504745,-43.799109,1.585)); +#251333 = VECTOR('',#251334,1.); +#251334 = DIRECTION('',(1.,0.,0.)); +#251335 = ORIENTED_EDGE('',*,*,#251336,.T.); +#251336 = EDGE_CURVE('',#251329,#251337,#251339,.T.); +#251337 = VERTEX_POINT('',#251338); +#251338 = CARTESIAN_POINT('',(110.927614,-43.383287,1.585)); +#251339 = LINE('',#251340,#251341); +#251340 = CARTESIAN_POINT('',(110.926173,-43.799109,1.585)); +#251341 = VECTOR('',#251342,1.); +#251342 = DIRECTION('',(3.465404301528E-03,0.999993995468,0.)); +#251343 = ORIENTED_EDGE('',*,*,#251344,.T.); +#251344 = EDGE_CURVE('',#251337,#251345,#251347,.T.); +#251345 = VERTEX_POINT('',#251346); +#251346 = CARTESIAN_POINT('',(111.076173,-43.397919,1.585)); +#251347 = CIRCLE('',#251348,7.500006711463E-02); +#251348 = AXIS2_PLACEMENT_3D('',#251349,#251350,#251351); +#251349 = CARTESIAN_POINT('',(111.00117293288,-43.39791893288,1.585)); +#251350 = DIRECTION('',(0.,0.,-1.)); +#251351 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#251352 = ORIENTED_EDGE('',*,*,#251353,.T.); +#251353 = EDGE_CURVE('',#251345,#251354,#251356,.T.); +#251354 = VERTEX_POINT('',#251355); +#251355 = CARTESIAN_POINT('',(111.074732,-44.412551,1.585)); +#251356 = LINE('',#251357,#251358); +#251357 = CARTESIAN_POINT('',(111.076173,-43.397919,1.585)); +#251358 = VECTOR('',#251359,1.); +#251359 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#251360 = ORIENTED_EDGE('',*,*,#251361,.T.); +#251361 = EDGE_CURVE('',#251354,#251362,#251364,.T.); +#251362 = VERTEX_POINT('',#251363); +#251363 = CARTESIAN_POINT('',(110.926173,-44.397919,1.585)); +#251364 = CIRCLE('',#251365,7.500006711463E-02); +#251365 = AXIS2_PLACEMENT_3D('',#251366,#251367,#251368); +#251366 = CARTESIAN_POINT('',(111.00117306711,-44.39791906711,1.585)); +#251367 = DIRECTION('',(-0.,0.,-1.)); +#251368 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#251369 = ORIENTED_EDGE('',*,*,#251370,.T.); +#251370 = EDGE_CURVE('',#251362,#251371,#251373,.T.); +#251371 = VERTEX_POINT('',#251372); +#251372 = CARTESIAN_POINT('',(110.926173,-43.949109,1.585)); +#251373 = LINE('',#251374,#251375); +#251374 = CARTESIAN_POINT('',(110.926173,-44.397919,1.585)); +#251375 = VECTOR('',#251376,1.); +#251376 = DIRECTION('',(0.,1.,0.)); +#251377 = ORIENTED_EDGE('',*,*,#251378,.T.); +#251378 = EDGE_CURVE('',#251371,#251379,#251381,.T.); +#251379 = VERTEX_POINT('',#251380); +#251380 = CARTESIAN_POINT('',(110.504745,-43.949109,1.585)); +#251381 = LINE('',#251382,#251383); +#251382 = CARTESIAN_POINT('',(110.926173,-43.949109,1.585)); +#251383 = VECTOR('',#251384,1.); +#251384 = DIRECTION('',(-1.,0.,0.)); +#251385 = ORIENTED_EDGE('',*,*,#251386,.T.); +#251386 = EDGE_CURVE('',#251379,#251387,#251389,.T.); +#251387 = VERTEX_POINT('',#251388); +#251388 = CARTESIAN_POINT('',(110.503304,-44.412551,1.585)); +#251389 = LINE('',#251390,#251391); +#251390 = CARTESIAN_POINT('',(110.504745,-43.949109,1.585)); +#251391 = VECTOR('',#251392,1.); +#251392 = DIRECTION('',(-3.109327670448E-03,-0.999995166029,0.)); +#251393 = ORIENTED_EDGE('',*,*,#251394,.T.); +#251394 = EDGE_CURVE('',#251387,#251395,#251397,.T.); +#251395 = VERTEX_POINT('',#251396); +#251396 = CARTESIAN_POINT('',(110.354745,-44.397919,1.585)); +#251397 = CIRCLE('',#251398,7.500006711464E-02); +#251398 = AXIS2_PLACEMENT_3D('',#251399,#251400,#251401); +#251399 = CARTESIAN_POINT('',(110.42974506711,-44.39791906711,1.585)); +#251400 = DIRECTION('',(-0.,0.,-1.)); +#251401 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#251402 = ORIENTED_EDGE('',*,*,#251403,.T.); +#251403 = EDGE_CURVE('',#251395,#251404,#251406,.T.); +#251404 = VERTEX_POINT('',#251405); +#251405 = CARTESIAN_POINT('',(110.356186,-43.383287,1.585)); +#251406 = LINE('',#251407,#251408); +#251407 = CARTESIAN_POINT('',(110.354745,-44.397919,1.585)); +#251408 = VECTOR('',#251409,1.); +#251409 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#251410 = ORIENTED_EDGE('',*,*,#251411,.T.); +#251411 = EDGE_CURVE('',#251404,#251412,#251414,.T.); +#251412 = VERTEX_POINT('',#251413); +#251413 = CARTESIAN_POINT('',(110.367385,-43.356251,1.585)); +#251414 = LINE('',#251415,#251416); +#251415 = CARTESIAN_POINT('',(110.356186,-43.383287,1.585)); +#251416 = VECTOR('',#251417,1.); +#251417 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251418 = ORIENTED_EDGE('',*,*,#251419,.T.); +#251419 = EDGE_CURVE('',#251412,#251310,#251420,.T.); +#251420 = LINE('',#251421,#251422); +#251421 = CARTESIAN_POINT('',(110.367385,-43.356251,1.585)); +#251422 = VECTOR('',#251423,1.); +#251423 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251424 = PLANE('',#251425); +#251425 = AXIS2_PLACEMENT_3D('',#251426,#251427,#251428); +#251426 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251427 = DIRECTION('',(0.,0.,1.)); +#251428 = DIRECTION('',(1.,0.,-0.)); +#251429 = SHELL_BASED_SURFACE_MODEL('',(#251430)); +#251430 = OPEN_SHELL('',(#251431)); +#251431 = ADVANCED_FACE('',(#251432),#251618,.T.); +#251432 = FACE_BOUND('',#251433,.F.); +#251433 = EDGE_LOOP('',(#251434,#251445,#251453,#251462,#251470,#251478, + #251487,#251495,#251504,#251512,#251520,#251528,#251537,#251545, + #251554,#251562,#251571,#251579,#251587,#251595,#251604,#251612)); +#251434 = ORIENTED_EDGE('',*,*,#251435,.T.); +#251435 = EDGE_CURVE('',#251436,#251438,#251440,.T.); +#251436 = VERTEX_POINT('',#251437); +#251437 = CARTESIAN_POINT('',(111.367494,-43.471478,1.585)); +#251438 = VERTEX_POINT('',#251439); +#251439 = CARTESIAN_POINT('',(111.382126,-43.322919,1.585)); +#251440 = CIRCLE('',#251441,7.500006711464E-02); +#251441 = AXIS2_PLACEMENT_3D('',#251442,#251443,#251444); +#251442 = CARTESIAN_POINT('',(111.38212593288,-43.39791906711,1.585)); +#251443 = DIRECTION('',(0.,0.,-1.)); +#251444 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#251445 = ORIENTED_EDGE('',*,*,#251446,.T.); +#251446 = EDGE_CURVE('',#251438,#251447,#251449,.T.); +#251447 = VERTEX_POINT('',#251448); +#251448 = CARTESIAN_POINT('',(112.008911,-43.323681,1.585)); +#251449 = LINE('',#251450,#251451); +#251450 = CARTESIAN_POINT('',(111.382126,-43.322919,1.585)); +#251451 = VECTOR('',#251452,1.); +#251452 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#251453 = ORIENTED_EDGE('',*,*,#251454,.T.); +#251454 = EDGE_CURVE('',#251447,#251455,#251457,.T.); +#251455 = VERTEX_POINT('',#251456); +#251456 = CARTESIAN_POINT('',(112.074732,-43.412551,1.585)); +#251457 = CIRCLE('',#251458,7.447391611622E-02); +#251458 = AXIS2_PLACEMENT_3D('',#251459,#251460,#251461); +#251459 = CARTESIAN_POINT('',(112.00173192664,-43.3978080874,1.585)); +#251460 = DIRECTION('',(0.,0.,-1.)); +#251461 = DIRECTION('',(9.639715124761E-02,0.995342950561,0.)); +#251462 = ORIENTED_EDGE('',*,*,#251463,.T.); +#251463 = EDGE_CURVE('',#251455,#251464,#251466,.T.); +#251464 = VERTEX_POINT('',#251465); +#251465 = CARTESIAN_POINT('',(112.057616,-43.447307,1.585)); +#251466 = LINE('',#251467,#251468); +#251467 = CARTESIAN_POINT('',(112.074732,-43.412551,1.585)); +#251468 = VECTOR('',#251469,1.); +#251469 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#251470 = ORIENTED_EDGE('',*,*,#251471,.T.); +#251471 = EDGE_CURVE('',#251464,#251472,#251474,.T.); +#251472 = VERTEX_POINT('',#251473); +#251473 = CARTESIAN_POINT('',(111.83072,-43.706616,1.585)); +#251474 = LINE('',#251475,#251476); +#251475 = CARTESIAN_POINT('',(112.057616,-43.447307,1.585)); +#251476 = VECTOR('',#251477,1.); +#251477 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#251478 = ORIENTED_EDGE('',*,*,#251479,.T.); +#251479 = EDGE_CURVE('',#251472,#251480,#251482,.T.); +#251480 = VERTEX_POINT('',#251481); +#251481 = CARTESIAN_POINT('',(112.074732,-43.954715,1.585)); +#251482 = CIRCLE('',#251483,0.348520834816); +#251483 = AXIS2_PLACEMENT_3D('',#251484,#251485,#251486); +#251484 = CARTESIAN_POINT('',(111.7374266174,-44.04241819931,1.585)); +#251485 = DIRECTION('',(0.,0.,-1.)); +#251486 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#251487 = ORIENTED_EDGE('',*,*,#251488,.T.); +#251488 = EDGE_CURVE('',#251480,#251489,#251491,.T.); +#251489 = VERTEX_POINT('',#251490); +#251490 = CARTESIAN_POINT('',(112.07351,-44.227252,1.585)); +#251491 = LINE('',#251492,#251493); +#251492 = CARTESIAN_POINT('',(112.074732,-43.954715,1.585)); +#251493 = VECTOR('',#251494,1.); +#251494 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#251495 = ORIENTED_EDGE('',*,*,#251496,.T.); +#251496 = EDGE_CURVE('',#251489,#251497,#251499,.T.); +#251497 = VERTEX_POINT('',#251498); +#251498 = CARTESIAN_POINT('',(111.825329,-44.471478,1.585)); +#251499 = CIRCLE('',#251500,0.348635327447); +#251500 = AXIS2_PLACEMENT_3D('',#251501,#251502,#251503); +#251501 = CARTESIAN_POINT('',(111.73755748129,-44.13407208415,1.585)); +#251502 = DIRECTION('',(0.,0.,-1.)); +#251503 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#251504 = ORIENTED_EDGE('',*,*,#251505,.T.); +#251505 = EDGE_CURVE('',#251497,#251506,#251508,.T.); +#251506 = VERTEX_POINT('',#251507); +#251507 = CARTESIAN_POINT('',(111.505173,-44.470256,1.585)); +#251508 = LINE('',#251509,#251510); +#251509 = CARTESIAN_POINT('',(111.825329,-44.471478,1.585)); +#251510 = VECTOR('',#251511,1.); +#251511 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#251512 = ORIENTED_EDGE('',*,*,#251513,.T.); +#251513 = EDGE_CURVE('',#251506,#251514,#251516,.T.); +#251514 = VERTEX_POINT('',#251515); +#251515 = CARTESIAN_POINT('',(111.38246,-44.40805,1.585)); +#251516 = LINE('',#251517,#251518); +#251517 = CARTESIAN_POINT('',(111.505173,-44.470256,1.585)); +#251518 = VECTOR('',#251519,1.); +#251519 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#251520 = ORIENTED_EDGE('',*,*,#251521,.T.); +#251521 = EDGE_CURVE('',#251514,#251522,#251524,.T.); +#251522 = VERTEX_POINT('',#251523); +#251523 = CARTESIAN_POINT('',(111.319765,-44.344347,1.585)); +#251524 = LINE('',#251525,#251526); +#251525 = CARTESIAN_POINT('',(111.38246,-44.40805,1.585)); +#251526 = VECTOR('',#251527,1.); +#251527 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#251528 = ORIENTED_EDGE('',*,*,#251529,.T.); +#251529 = EDGE_CURVE('',#251522,#251530,#251532,.T.); +#251530 = VERTEX_POINT('',#251531); +#251531 = CARTESIAN_POINT('',(111.43516,-44.249648,1.585)); +#251532 = CIRCLE('',#251533,7.50001266804E-02); +#251533 = AXIS2_PLACEMENT_3D('',#251534,#251535,#251536); +#251534 = CARTESIAN_POINT('',(111.38212605199,-44.30268024831,1.585)); +#251535 = DIRECTION('',(0.,0.,-1.)); +#251536 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#251537 = ORIENTED_EDGE('',*,*,#251538,.T.); +#251538 = EDGE_CURVE('',#251530,#251539,#251541,.T.); +#251539 = VERTEX_POINT('',#251540); +#251540 = CARTESIAN_POINT('',(111.474172,-44.288661,1.585)); +#251541 = LINE('',#251542,#251543); +#251542 = CARTESIAN_POINT('',(111.43516,-44.249648,1.585)); +#251543 = VECTOR('',#251544,1.); +#251544 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#251545 = ORIENTED_EDGE('',*,*,#251546,.T.); +#251546 = EDGE_CURVE('',#251539,#251547,#251549,.T.); +#251547 = VERTEX_POINT('',#251548); +#251548 = CARTESIAN_POINT('',(111.861507,-44.288661,1.585)); +#251549 = CIRCLE('',#251550,0.358502380266); +#251550 = AXIS2_PLACEMENT_3D('',#251551,#251552,#251553); +#251551 = CARTESIAN_POINT('',(111.6678395,-43.986971,1.585)); +#251552 = DIRECTION('',(0.,0.,1.)); +#251553 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#251554 = ORIENTED_EDGE('',*,*,#251555,.T.); +#251555 = EDGE_CURVE('',#251547,#251556,#251558,.T.); +#251556 = VERTEX_POINT('',#251557); +#251557 = CARTESIAN_POINT('',(111.891914,-44.258253,1.585)); +#251558 = LINE('',#251559,#251560); +#251559 = CARTESIAN_POINT('',(111.861507,-44.288661,1.585)); +#251560 = VECTOR('',#251561,1.); +#251561 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#251562 = ORIENTED_EDGE('',*,*,#251563,.T.); +#251563 = EDGE_CURVE('',#251556,#251564,#251566,.T.); +#251564 = VERTEX_POINT('',#251565); +#251565 = CARTESIAN_POINT('',(111.891915,-43.918536,1.585)); +#251566 = CIRCLE('',#251567,0.305616146029); +#251567 = AXIS2_PLACEMENT_3D('',#251568,#251569,#251570); +#251568 = CARTESIAN_POINT('',(111.63784892049,-44.08839375212,1.585)); +#251569 = DIRECTION('',(0.,-0.,1.)); +#251570 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#251571 = ORIENTED_EDGE('',*,*,#251572,.T.); +#251572 = EDGE_CURVE('',#251564,#251573,#251575,.T.); +#251573 = VERTEX_POINT('',#251574); +#251574 = CARTESIAN_POINT('',(111.861508,-43.888129,1.585)); +#251575 = LINE('',#251576,#251577); +#251576 = CARTESIAN_POINT('',(111.891915,-43.918536,1.585)); +#251577 = VECTOR('',#251578,1.); +#251578 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#251579 = ORIENTED_EDGE('',*,*,#251580,.T.); +#251580 = EDGE_CURVE('',#251573,#251581,#251583,.T.); +#251581 = VERTEX_POINT('',#251582); +#251582 = CARTESIAN_POINT('',(111.792992,-43.853871,1.585)); +#251583 = LINE('',#251584,#251585); +#251584 = CARTESIAN_POINT('',(111.861508,-43.888129,1.585)); +#251585 = VECTOR('',#251586,1.); +#251586 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#251587 = ORIENTED_EDGE('',*,*,#251588,.T.); +#251588 = EDGE_CURVE('',#251581,#251589,#251591,.T.); +#251589 = VERTEX_POINT('',#251590); +#251590 = CARTESIAN_POINT('',(111.653208,-43.85243,1.585)); +#251591 = LINE('',#251592,#251593); +#251592 = CARTESIAN_POINT('',(111.792992,-43.853871,1.585)); +#251593 = VECTOR('',#251594,1.); +#251594 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#251595 = ORIENTED_EDGE('',*,*,#251596,.T.); +#251596 = EDGE_CURVE('',#251589,#251597,#251599,.T.); +#251597 = VERTEX_POINT('',#251598); +#251598 = CARTESIAN_POINT('',(111.611397,-43.729483,1.585)); +#251599 = CIRCLE('',#251600,7.500015628755E-02); +#251600 = AXIS2_PLACEMENT_3D('',#251601,#251602,#251603); +#251601 = CARTESIAN_POINT('',(111.66784028432,-43.7788710461,1.585)); +#251602 = DIRECTION('',(0.,0.,-1.)); +#251603 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#251604 = ORIENTED_EDGE('',*,*,#251605,.T.); +#251605 = EDGE_CURVE('',#251597,#251606,#251608,.T.); +#251606 = VERTEX_POINT('',#251607); +#251607 = CARTESIAN_POINT('',(111.835891,-43.472919,1.585)); +#251608 = LINE('',#251609,#251610); +#251609 = CARTESIAN_POINT('',(111.611397,-43.729483,1.585)); +#251610 = VECTOR('',#251611,1.); +#251611 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#251612 = ORIENTED_EDGE('',*,*,#251613,.T.); +#251613 = EDGE_CURVE('',#251606,#251436,#251614,.T.); +#251614 = LINE('',#251615,#251616); +#251615 = CARTESIAN_POINT('',(111.835891,-43.472919,1.585)); +#251616 = VECTOR('',#251617,1.); +#251617 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#251618 = PLANE('',#251619); +#251619 = AXIS2_PLACEMENT_3D('',#251620,#251621,#251622); +#251620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251621 = DIRECTION('',(0.,0.,1.)); +#251622 = DIRECTION('',(1.,0.,-0.)); +#251623 = SHELL_BASED_SURFACE_MODEL('',(#251624)); +#251624 = OPEN_SHELL('',(#251625)); +#251625 = ADVANCED_FACE('',(#251626),#251800,.T.); +#251626 = FACE_BOUND('',#251627,.F.); +#251627 = EDGE_LOOP('',(#251628,#251639,#251647,#251655,#251664,#251672, + #251680,#251688,#251696,#251704,#251713,#251721,#251729,#251737, + #251745,#251753,#251761,#251770,#251778,#251786,#251794)); +#251628 = ORIENTED_EDGE('',*,*,#251629,.T.); +#251629 = EDGE_CURVE('',#251630,#251632,#251634,.T.); +#251630 = VERTEX_POINT('',#251631); +#251631 = CARTESIAN_POINT('',(169.684506,-43.285559,1.585)); +#251632 = VERTEX_POINT('',#251633); +#251633 = CARTESIAN_POINT('',(169.801174,-43.347919,1.585)); +#251634 = CIRCLE('',#251635,7.500000000003E-02); +#251635 = AXIS2_PLACEMENT_3D('',#251636,#251637,#251638); +#251636 = CARTESIAN_POINT('',(169.726174,-43.34791906555,1.585)); +#251637 = DIRECTION('',(0.,0.,-1.)); +#251638 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#251639 = ORIENTED_EDGE('',*,*,#251640,.T.); +#251640 = EDGE_CURVE('',#251632,#251641,#251643,.T.); +#251641 = VERTEX_POINT('',#251642); +#251642 = CARTESIAN_POINT('',(169.801174,-43.606252,1.585)); +#251643 = LINE('',#251644,#251645); +#251644 = CARTESIAN_POINT('',(169.801174,-43.347919,1.585)); +#251645 = VECTOR('',#251646,1.); +#251646 = DIRECTION('',(0.,-1.,0.)); +#251647 = ORIENTED_EDGE('',*,*,#251648,.T.); +#251648 = EDGE_CURVE('',#251641,#251649,#251651,.T.); +#251649 = VERTEX_POINT('',#251650); +#251650 = CARTESIAN_POINT('',(169.978901,-43.607693,1.585)); +#251651 = LINE('',#251652,#251653); +#251652 = CARTESIAN_POINT('',(169.801174,-43.606252,1.585)); +#251653 = VECTOR('',#251654,1.); +#251654 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#251655 = ORIENTED_EDGE('',*,*,#251656,.T.); +#251656 = EDGE_CURVE('',#251649,#251657,#251659,.T.); +#251657 = VERTEX_POINT('',#251658); +#251658 = CARTESIAN_POINT('',(169.964269,-43.756252,1.585)); +#251659 = CIRCLE('',#251660,7.500006711464E-02); +#251660 = AXIS2_PLACEMENT_3D('',#251661,#251662,#251663); +#251661 = CARTESIAN_POINT('',(169.96426906711,-43.68125193288,1.585)); +#251662 = DIRECTION('',(0.,0.,-1.)); +#251663 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#251664 = ORIENTED_EDGE('',*,*,#251665,.T.); +#251665 = EDGE_CURVE('',#251657,#251666,#251668,.T.); +#251666 = VERTEX_POINT('',#251667); +#251667 = CARTESIAN_POINT('',(169.801174,-43.756252,1.585)); +#251668 = LINE('',#251669,#251670); +#251669 = CARTESIAN_POINT('',(169.964269,-43.756252,1.585)); +#251670 = VECTOR('',#251671,1.); +#251671 = DIRECTION('',(-1.,0.,0.)); +#251672 = ORIENTED_EDGE('',*,*,#251673,.T.); +#251673 = EDGE_CURVE('',#251666,#251674,#251676,.T.); +#251674 = VERTEX_POINT('',#251675); +#251675 = CARTESIAN_POINT('',(169.801174,-44.187356,1.585)); +#251676 = LINE('',#251677,#251678); +#251677 = CARTESIAN_POINT('',(169.801174,-43.756252,1.585)); +#251678 = VECTOR('',#251679,1.); +#251679 = DIRECTION('',(0.,-1.,0.)); +#251680 = ORIENTED_EDGE('',*,*,#251681,.T.); +#251681 = EDGE_CURVE('',#251674,#251682,#251684,.T.); +#251682 = VERTEX_POINT('',#251683); +#251683 = CARTESIAN_POINT('',(169.829694,-44.244398,1.585)); +#251684 = LINE('',#251685,#251686); +#251685 = CARTESIAN_POINT('',(169.801174,-44.187356,1.585)); +#251686 = VECTOR('',#251687,1.); +#251687 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#251688 = ORIENTED_EDGE('',*,*,#251689,.T.); +#251689 = EDGE_CURVE('',#251682,#251690,#251692,.T.); +#251690 = VERTEX_POINT('',#251691); +#251691 = CARTESIAN_POINT('',(169.886736,-44.272919,1.585)); +#251692 = LINE('',#251693,#251694); +#251693 = CARTESIAN_POINT('',(169.829694,-44.244398,1.585)); +#251694 = VECTOR('',#251695,1.); +#251695 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#251696 = ORIENTED_EDGE('',*,*,#251697,.T.); +#251697 = EDGE_CURVE('',#251690,#251698,#251700,.T.); +#251698 = VERTEX_POINT('',#251699); +#251699 = CARTESIAN_POINT('',(169.978901,-44.27436,1.585)); +#251700 = LINE('',#251701,#251702); +#251701 = CARTESIAN_POINT('',(169.886736,-44.272919,1.585)); +#251702 = VECTOR('',#251703,1.); +#251703 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#251704 = ORIENTED_EDGE('',*,*,#251705,.T.); +#251705 = EDGE_CURVE('',#251698,#251706,#251708,.T.); +#251706 = VERTEX_POINT('',#251707); +#251707 = CARTESIAN_POINT('',(169.964269,-44.422919,1.585)); +#251708 = CIRCLE('',#251709,7.500006711464E-02); +#251709 = AXIS2_PLACEMENT_3D('',#251710,#251711,#251712); +#251710 = CARTESIAN_POINT('',(169.96426906711,-44.34791893288,1.585)); +#251711 = DIRECTION('',(0.,0.,-1.)); +#251712 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#251713 = ORIENTED_EDGE('',*,*,#251714,.T.); +#251714 = EDGE_CURVE('',#251706,#251715,#251717,.T.); +#251715 = VERTEX_POINT('',#251716); +#251716 = CARTESIAN_POINT('',(169.849221,-44.420256,1.585)); +#251717 = LINE('',#251718,#251719); +#251718 = CARTESIAN_POINT('',(169.964269,-44.422919,1.585)); +#251719 = VECTOR('',#251720,1.); +#251720 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#251721 = ORIENTED_EDGE('',*,*,#251722,.T.); +#251722 = EDGE_CURVE('',#251715,#251723,#251725,.T.); +#251723 = VERTEX_POINT('',#251724); +#251724 = CARTESIAN_POINT('',(169.727809,-44.35955,1.585)); +#251725 = LINE('',#251726,#251727); +#251726 = CARTESIAN_POINT('',(169.849221,-44.420256,1.585)); +#251727 = VECTOR('',#251728,1.); +#251728 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#251729 = ORIENTED_EDGE('',*,*,#251730,.T.); +#251730 = EDGE_CURVE('',#251723,#251731,#251733,.T.); +#251731 = VERTEX_POINT('',#251732); +#251732 = CARTESIAN_POINT('',(169.706711,-44.333841,1.585)); +#251733 = LINE('',#251734,#251735); +#251734 = CARTESIAN_POINT('',(169.727809,-44.35955,1.585)); +#251735 = VECTOR('',#251736,1.); +#251736 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#251737 = ORIENTED_EDGE('',*,*,#251738,.T.); +#251738 = EDGE_CURVE('',#251731,#251739,#251741,.T.); +#251739 = VERTEX_POINT('',#251740); +#251740 = CARTESIAN_POINT('',(169.652615,-44.219693,1.585)); +#251741 = LINE('',#251742,#251743); +#251742 = CARTESIAN_POINT('',(169.706711,-44.333841,1.585)); +#251743 = VECTOR('',#251744,1.); +#251744 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#251745 = ORIENTED_EDGE('',*,*,#251746,.T.); +#251746 = EDGE_CURVE('',#251739,#251747,#251749,.T.); +#251747 = VERTEX_POINT('',#251748); +#251748 = CARTESIAN_POINT('',(169.651174,-43.756252,1.585)); +#251749 = LINE('',#251750,#251751); +#251750 = CARTESIAN_POINT('',(169.652615,-44.219693,1.585)); +#251751 = VECTOR('',#251752,1.); +#251752 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#251753 = ORIENTED_EDGE('',*,*,#251754,.T.); +#251754 = EDGE_CURVE('',#251747,#251755,#251757,.T.); +#251755 = VERTEX_POINT('',#251756); +#251756 = CARTESIAN_POINT('',(169.568685,-43.754811,1.585)); +#251757 = LINE('',#251758,#251759); +#251758 = CARTESIAN_POINT('',(169.651174,-43.756252,1.585)); +#251759 = VECTOR('',#251760,1.); +#251760 = DIRECTION('',(-0.999847452005,1.746633100591E-02,0.)); +#251761 = ORIENTED_EDGE('',*,*,#251762,.T.); +#251762 = EDGE_CURVE('',#251755,#251763,#251765,.T.); +#251763 = VERTEX_POINT('',#251764); +#251764 = CARTESIAN_POINT('',(169.583317,-43.606252,1.585)); +#251765 = CIRCLE('',#251766,7.500006711464E-02); +#251766 = AXIS2_PLACEMENT_3D('',#251767,#251768,#251769); +#251767 = CARTESIAN_POINT('',(169.58331693288,-43.68125206711,1.585)); +#251768 = DIRECTION('',(0.,0.,-1.)); +#251769 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#251770 = ORIENTED_EDGE('',*,*,#251771,.T.); +#251771 = EDGE_CURVE('',#251763,#251772,#251774,.T.); +#251772 = VERTEX_POINT('',#251773); +#251773 = CARTESIAN_POINT('',(169.651174,-43.606252,1.585)); +#251774 = LINE('',#251775,#251776); +#251775 = CARTESIAN_POINT('',(169.583317,-43.606252,1.585)); +#251776 = VECTOR('',#251777,1.); +#251777 = DIRECTION('',(1.,0.,0.)); +#251778 = ORIENTED_EDGE('',*,*,#251779,.T.); +#251779 = EDGE_CURVE('',#251772,#251780,#251782,.T.); +#251780 = VERTEX_POINT('',#251781); +#251781 = CARTESIAN_POINT('',(169.652615,-43.333287,1.585)); +#251782 = LINE('',#251783,#251784); +#251783 = CARTESIAN_POINT('',(169.651174,-43.606252,1.585)); +#251784 = VECTOR('',#251785,1.); +#251785 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#251786 = ORIENTED_EDGE('',*,*,#251787,.T.); +#251787 = EDGE_CURVE('',#251780,#251788,#251790,.T.); +#251788 = VERTEX_POINT('',#251789); +#251789 = CARTESIAN_POINT('',(169.663814,-43.306251,1.585)); +#251790 = LINE('',#251791,#251792); +#251791 = CARTESIAN_POINT('',(169.652615,-43.333287,1.585)); +#251792 = VECTOR('',#251793,1.); +#251793 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251794 = ORIENTED_EDGE('',*,*,#251795,.T.); +#251795 = EDGE_CURVE('',#251788,#251630,#251796,.T.); +#251796 = LINE('',#251797,#251798); +#251797 = CARTESIAN_POINT('',(169.663814,-43.306251,1.585)); +#251798 = VECTOR('',#251799,1.); +#251799 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#251800 = PLANE('',#251801); +#251801 = AXIS2_PLACEMENT_3D('',#251802,#251803,#251804); +#251802 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251803 = DIRECTION('',(0.,0.,1.)); +#251804 = DIRECTION('',(1.,0.,-0.)); +#251805 = SHELL_BASED_SURFACE_MODEL('',(#251806)); +#251806 = OPEN_SHELL('',(#251807)); +#251807 = ADVANCED_FACE('',(#251808),#251967,.T.); +#251808 = FACE_BOUND('',#251809,.F.); +#251809 = EDGE_LOOP('',(#251810,#251821,#251829,#251837,#251845,#251853, + #251861,#251869,#251878,#251886,#251895,#251903,#251911,#251919, + #251928,#251936,#251944,#251952,#251961)); +#251810 = ORIENTED_EDGE('',*,*,#251811,.T.); +#251811 = EDGE_CURVE('',#251812,#251814,#251816,.T.); +#251812 = VERTEX_POINT('',#251813); +#251813 = CARTESIAN_POINT('',(173.618823,-43.328456,1.585)); +#251814 = VERTEX_POINT('',#251815); +#251815 = CARTESIAN_POINT('',(174.128218,-43.337786,1.585)); +#251816 = CIRCLE('',#251817,0.450326844012); +#251817 = AXIS2_PLACEMENT_3D('',#251818,#251819,#251820); +#251818 = CARTESIAN_POINT('',(173.8667200301,-43.70440989199,1.585)); +#251819 = DIRECTION('',(0.,0.,-1.)); +#251820 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#251821 = ORIENTED_EDGE('',*,*,#251822,.T.); +#251822 = EDGE_CURVE('',#251814,#251823,#251825,.T.); +#251823 = VERTEX_POINT('',#251824); +#251824 = CARTESIAN_POINT('',(174.191671,-43.403316,1.585)); +#251825 = LINE('',#251826,#251827); +#251826 = CARTESIAN_POINT('',(174.128218,-43.337786,1.585)); +#251827 = VECTOR('',#251828,1.); +#251828 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#251829 = ORIENTED_EDGE('',*,*,#251830,.T.); +#251830 = EDGE_CURVE('',#251823,#251831,#251833,.T.); +#251831 = VERTEX_POINT('',#251832); +#251832 = CARTESIAN_POINT('',(174.249732,-43.523763,1.585)); +#251833 = LINE('',#251834,#251835); +#251834 = CARTESIAN_POINT('',(174.191671,-43.403316,1.585)); +#251835 = VECTOR('',#251836,1.); +#251836 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#251837 = ORIENTED_EDGE('',*,*,#251838,.T.); +#251838 = EDGE_CURVE('',#251831,#251839,#251841,.T.); +#251839 = VERTEX_POINT('',#251840); +#251840 = CARTESIAN_POINT('',(174.248973,-43.650095,1.585)); +#251841 = LINE('',#251842,#251843); +#251842 = CARTESIAN_POINT('',(174.249732,-43.523763,1.585)); +#251843 = VECTOR('',#251844,1.); +#251844 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#251845 = ORIENTED_EDGE('',*,*,#251846,.T.); +#251846 = EDGE_CURVE('',#251839,#251847,#251849,.T.); +#251847 = VERTEX_POINT('',#251848); +#251848 = CARTESIAN_POINT('',(174.190915,-43.818158,1.585)); +#251849 = LINE('',#251850,#251851); +#251850 = CARTESIAN_POINT('',(174.248973,-43.650095,1.585)); +#251851 = VECTOR('',#251852,1.); +#251852 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#251853 = ORIENTED_EDGE('',*,*,#251854,.T.); +#251854 = EDGE_CURVE('',#251847,#251855,#251857,.T.); +#251855 = VERTEX_POINT('',#251856); +#251856 = CARTESIAN_POINT('',(173.738192,-44.272919,1.585)); +#251857 = LINE('',#251858,#251859); +#251858 = CARTESIAN_POINT('',(174.190915,-43.818158,1.585)); +#251859 = VECTOR('',#251860,1.); +#251860 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#251861 = ORIENTED_EDGE('',*,*,#251862,.T.); +#251862 = EDGE_CURVE('',#251855,#251863,#251865,.T.); +#251863 = VERTEX_POINT('',#251864); +#251864 = CARTESIAN_POINT('',(174.190805,-44.27436,1.585)); +#251865 = LINE('',#251866,#251867); +#251866 = CARTESIAN_POINT('',(173.738192,-44.272919,1.585)); +#251867 = VECTOR('',#251868,1.); +#251868 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#251869 = ORIENTED_EDGE('',*,*,#251870,.T.); +#251870 = EDGE_CURVE('',#251863,#251871,#251873,.T.); +#251871 = VERTEX_POINT('',#251872); +#251872 = CARTESIAN_POINT('',(174.176173,-44.422919,1.585)); +#251873 = CIRCLE('',#251874,7.500006711464E-02); +#251874 = AXIS2_PLACEMENT_3D('',#251875,#251876,#251877); +#251875 = CARTESIAN_POINT('',(174.17617306711,-44.34791893288,1.585)); +#251876 = DIRECTION('',(0.,0.,-1.)); +#251877 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#251878 = ORIENTED_EDGE('',*,*,#251879,.T.); +#251879 = EDGE_CURVE('',#251871,#251880,#251882,.T.); +#251880 = VERTEX_POINT('',#251881); +#251881 = CARTESIAN_POINT('',(173.542494,-44.421478,1.585)); +#251882 = LINE('',#251883,#251884); +#251883 = CARTESIAN_POINT('',(174.176173,-44.422919,1.585)); +#251884 = VECTOR('',#251885,1.); +#251885 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#251886 = ORIENTED_EDGE('',*,*,#251887,.T.); +#251887 = EDGE_CURVE('',#251880,#251888,#251890,.T.); +#251888 = VERTEX_POINT('',#251889); +#251889 = CARTESIAN_POINT('',(173.504093,-44.294886,1.585)); +#251890 = CIRCLE('',#251891,7.500021013109E-02); +#251891 = AXIS2_PLACEMENT_3D('',#251892,#251893,#251894); +#251892 = CARTESIAN_POINT('',(173.5571263167,-44.34791899764,1.585)); +#251893 = DIRECTION('',(0.,0.,-1.)); +#251894 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#251895 = ORIENTED_EDGE('',*,*,#251896,.T.); +#251896 = EDGE_CURVE('',#251888,#251897,#251899,.T.); +#251897 = VERTEX_POINT('',#251898); +#251898 = CARTESIAN_POINT('',(174.063001,-43.735976,1.585)); +#251899 = LINE('',#251900,#251901); +#251900 = CARTESIAN_POINT('',(173.504093,-44.294886,1.585)); +#251901 = VECTOR('',#251902,1.); +#251902 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#251903 = ORIENTED_EDGE('',*,*,#251904,.T.); +#251904 = EDGE_CURVE('',#251897,#251905,#251907,.T.); +#251905 = VERTEX_POINT('',#251906); +#251906 = CARTESIAN_POINT('',(174.101173,-43.621463,1.585)); +#251907 = LINE('',#251908,#251909); +#251908 = CARTESIAN_POINT('',(174.063001,-43.735976,1.585)); +#251909 = VECTOR('',#251910,1.); +#251910 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#251911 = ORIENTED_EDGE('',*,*,#251912,.T.); +#251912 = EDGE_CURVE('',#251905,#251913,#251915,.T.); +#251913 = VERTEX_POINT('',#251914); +#251914 = CARTESIAN_POINT('',(174.101173,-43.5561,1.585)); +#251915 = LINE('',#251916,#251917); +#251916 = CARTESIAN_POINT('',(174.101173,-43.621463,1.585)); +#251917 = VECTOR('',#251918,1.); +#251918 = DIRECTION('',(0.,1.,0.)); +#251919 = ORIENTED_EDGE('',*,*,#251920,.T.); +#251920 = EDGE_CURVE('',#251913,#251921,#251923,.T.); +#251921 = VERTEX_POINT('',#251922); +#251922 = CARTESIAN_POINT('',(173.967992,-43.422919,1.585)); +#251923 = CIRCLE('',#251924,0.18686440374); +#251924 = AXIS2_PLACEMENT_3D('',#251925,#251926,#251927); +#251925 = CARTESIAN_POINT('',(173.920456,-43.603636,1.585)); +#251926 = DIRECTION('',(0.,0.,1.)); +#251927 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#251928 = ORIENTED_EDGE('',*,*,#251929,.T.); +#251929 = EDGE_CURVE('',#251921,#251930,#251932,.T.); +#251930 = VERTEX_POINT('',#251931); +#251931 = CARTESIAN_POINT('',(173.765307,-43.422919,1.585)); +#251932 = LINE('',#251933,#251934); +#251933 = CARTESIAN_POINT('',(173.967992,-43.422919,1.585)); +#251934 = VECTOR('',#251935,1.); +#251935 = DIRECTION('',(-1.,0.,0.)); +#251936 = ORIENTED_EDGE('',*,*,#251937,.T.); +#251937 = EDGE_CURVE('',#251930,#251938,#251940,.T.); +#251938 = VERTEX_POINT('',#251939); +#251939 = CARTESIAN_POINT('',(173.696791,-43.457177,1.585)); +#251940 = LINE('',#251941,#251942); +#251941 = CARTESIAN_POINT('',(173.765307,-43.422919,1.585)); +#251942 = VECTOR('',#251943,1.); +#251943 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#251944 = ORIENTED_EDGE('',*,*,#251945,.T.); +#251945 = EDGE_CURVE('',#251938,#251946,#251948,.T.); +#251946 = VERTEX_POINT('',#251947); +#251947 = CARTESIAN_POINT('',(173.646413,-43.505517,1.585)); +#251948 = LINE('',#251949,#251950); +#251949 = CARTESIAN_POINT('',(173.696791,-43.457177,1.585)); +#251950 = VECTOR('',#251951,1.); +#251951 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#251952 = ORIENTED_EDGE('',*,*,#251953,.T.); +#251953 = EDGE_CURVE('',#251946,#251954,#251956,.T.); +#251954 = VERTEX_POINT('',#251955); +#251955 = CARTESIAN_POINT('',(173.551712,-43.390124,1.585)); +#251956 = CIRCLE('',#251957,7.499996838526E-02); +#251957 = AXIS2_PLACEMENT_3D('',#251958,#251959,#251960); +#251958 = CARTESIAN_POINT('',(173.604745,-43.44315697246,1.585)); +#251959 = DIRECTION('',(0.,0.,-1.)); +#251960 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#251961 = ORIENTED_EDGE('',*,*,#251962,.T.); +#251962 = EDGE_CURVE('',#251954,#251812,#251963,.T.); +#251963 = LINE('',#251964,#251965); +#251964 = CARTESIAN_POINT('',(173.551712,-43.390124,1.585)); +#251965 = VECTOR('',#251966,1.); +#251966 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#251967 = PLANE('',#251968); +#251968 = AXIS2_PLACEMENT_3D('',#251969,#251970,#251971); +#251969 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251970 = DIRECTION('',(0.,0.,1.)); +#251971 = DIRECTION('',(1.,0.,-0.)); +#251972 = SHELL_BASED_SURFACE_MODEL('',(#251973)); +#251973 = OPEN_SHELL('',(#251974)); +#251974 = ADVANCED_FACE('',(#251975),#252134,.T.); +#251975 = FACE_BOUND('',#251976,.F.); +#251976 = EDGE_LOOP('',(#251977,#251988,#251996,#252004,#252012,#252020, + #252028,#252036,#252045,#252053,#252062,#252070,#252078,#252086, + #252095,#252103,#252111,#252119,#252128)); +#251977 = ORIENTED_EDGE('',*,*,#251978,.T.); +#251978 = EDGE_CURVE('',#251979,#251981,#251983,.T.); +#251979 = VERTEX_POINT('',#251980); +#251980 = CARTESIAN_POINT('',(176.843823,-43.328456,1.585)); +#251981 = VERTEX_POINT('',#251982); +#251982 = CARTESIAN_POINT('',(177.353218,-43.337786,1.585)); +#251983 = CIRCLE('',#251984,0.450326844012); +#251984 = AXIS2_PLACEMENT_3D('',#251985,#251986,#251987); +#251985 = CARTESIAN_POINT('',(177.0917200301,-43.70440989199,1.585)); +#251986 = DIRECTION('',(0.,0.,-1.)); +#251987 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#251988 = ORIENTED_EDGE('',*,*,#251989,.T.); +#251989 = EDGE_CURVE('',#251981,#251990,#251992,.T.); +#251990 = VERTEX_POINT('',#251991); +#251991 = CARTESIAN_POINT('',(177.416671,-43.403316,1.585)); +#251992 = LINE('',#251993,#251994); +#251993 = CARTESIAN_POINT('',(177.353218,-43.337786,1.585)); +#251994 = VECTOR('',#251995,1.); +#251995 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#251996 = ORIENTED_EDGE('',*,*,#251997,.T.); +#251997 = EDGE_CURVE('',#251990,#251998,#252000,.T.); +#251998 = VERTEX_POINT('',#251999); +#251999 = CARTESIAN_POINT('',(177.474732,-43.523763,1.585)); +#252000 = LINE('',#252001,#252002); +#252001 = CARTESIAN_POINT('',(177.416671,-43.403316,1.585)); +#252002 = VECTOR('',#252003,1.); +#252003 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#252004 = ORIENTED_EDGE('',*,*,#252005,.T.); +#252005 = EDGE_CURVE('',#251998,#252006,#252008,.T.); +#252006 = VERTEX_POINT('',#252007); +#252007 = CARTESIAN_POINT('',(177.473973,-43.650095,1.585)); +#252008 = LINE('',#252009,#252010); +#252009 = CARTESIAN_POINT('',(177.474732,-43.523763,1.585)); +#252010 = VECTOR('',#252011,1.); +#252011 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#252012 = ORIENTED_EDGE('',*,*,#252013,.T.); +#252013 = EDGE_CURVE('',#252006,#252014,#252016,.T.); +#252014 = VERTEX_POINT('',#252015); +#252015 = CARTESIAN_POINT('',(177.415915,-43.818158,1.585)); +#252016 = LINE('',#252017,#252018); +#252017 = CARTESIAN_POINT('',(177.473973,-43.650095,1.585)); +#252018 = VECTOR('',#252019,1.); +#252019 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#252020 = ORIENTED_EDGE('',*,*,#252021,.T.); +#252021 = EDGE_CURVE('',#252014,#252022,#252024,.T.); +#252022 = VERTEX_POINT('',#252023); +#252023 = CARTESIAN_POINT('',(176.963192,-44.272919,1.585)); +#252024 = LINE('',#252025,#252026); +#252025 = CARTESIAN_POINT('',(177.415915,-43.818158,1.585)); +#252026 = VECTOR('',#252027,1.); +#252027 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#252028 = ORIENTED_EDGE('',*,*,#252029,.T.); +#252029 = EDGE_CURVE('',#252022,#252030,#252032,.T.); +#252030 = VERTEX_POINT('',#252031); +#252031 = CARTESIAN_POINT('',(177.415805,-44.27436,1.585)); +#252032 = LINE('',#252033,#252034); +#252033 = CARTESIAN_POINT('',(176.963192,-44.272919,1.585)); +#252034 = VECTOR('',#252035,1.); +#252035 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#252036 = ORIENTED_EDGE('',*,*,#252037,.T.); +#252037 = EDGE_CURVE('',#252030,#252038,#252040,.T.); +#252038 = VERTEX_POINT('',#252039); +#252039 = CARTESIAN_POINT('',(177.401173,-44.422919,1.585)); +#252040 = CIRCLE('',#252041,7.500006711464E-02); +#252041 = AXIS2_PLACEMENT_3D('',#252042,#252043,#252044); +#252042 = CARTESIAN_POINT('',(177.40117306711,-44.34791893288,1.585)); +#252043 = DIRECTION('',(0.,0.,-1.)); +#252044 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#252045 = ORIENTED_EDGE('',*,*,#252046,.T.); +#252046 = EDGE_CURVE('',#252038,#252047,#252049,.T.); +#252047 = VERTEX_POINT('',#252048); +#252048 = CARTESIAN_POINT('',(176.767494,-44.421478,1.585)); +#252049 = LINE('',#252050,#252051); +#252050 = CARTESIAN_POINT('',(177.401173,-44.422919,1.585)); +#252051 = VECTOR('',#252052,1.); +#252052 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#252053 = ORIENTED_EDGE('',*,*,#252054,.T.); +#252054 = EDGE_CURVE('',#252047,#252055,#252057,.T.); +#252055 = VERTEX_POINT('',#252056); +#252056 = CARTESIAN_POINT('',(176.729093,-44.294886,1.585)); +#252057 = CIRCLE('',#252058,7.500021013109E-02); +#252058 = AXIS2_PLACEMENT_3D('',#252059,#252060,#252061); +#252059 = CARTESIAN_POINT('',(176.7821263167,-44.34791899764,1.585)); +#252060 = DIRECTION('',(0.,0.,-1.)); +#252061 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#252062 = ORIENTED_EDGE('',*,*,#252063,.T.); +#252063 = EDGE_CURVE('',#252055,#252064,#252066,.T.); +#252064 = VERTEX_POINT('',#252065); +#252065 = CARTESIAN_POINT('',(177.288001,-43.735976,1.585)); +#252066 = LINE('',#252067,#252068); +#252067 = CARTESIAN_POINT('',(176.729093,-44.294886,1.585)); +#252068 = VECTOR('',#252069,1.); +#252069 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#252070 = ORIENTED_EDGE('',*,*,#252071,.T.); +#252071 = EDGE_CURVE('',#252064,#252072,#252074,.T.); +#252072 = VERTEX_POINT('',#252073); +#252073 = CARTESIAN_POINT('',(177.326173,-43.621463,1.585)); +#252074 = LINE('',#252075,#252076); +#252075 = CARTESIAN_POINT('',(177.288001,-43.735976,1.585)); +#252076 = VECTOR('',#252077,1.); +#252077 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#252078 = ORIENTED_EDGE('',*,*,#252079,.T.); +#252079 = EDGE_CURVE('',#252072,#252080,#252082,.T.); +#252080 = VERTEX_POINT('',#252081); +#252081 = CARTESIAN_POINT('',(177.326173,-43.5561,1.585)); +#252082 = LINE('',#252083,#252084); +#252083 = CARTESIAN_POINT('',(177.326173,-43.621463,1.585)); +#252084 = VECTOR('',#252085,1.); +#252085 = DIRECTION('',(0.,1.,0.)); +#252086 = ORIENTED_EDGE('',*,*,#252087,.T.); +#252087 = EDGE_CURVE('',#252080,#252088,#252090,.T.); +#252088 = VERTEX_POINT('',#252089); +#252089 = CARTESIAN_POINT('',(177.192992,-43.422919,1.585)); +#252090 = CIRCLE('',#252091,0.18686440374); +#252091 = AXIS2_PLACEMENT_3D('',#252092,#252093,#252094); +#252092 = CARTESIAN_POINT('',(177.145456,-43.603636,1.585)); +#252093 = DIRECTION('',(0.,0.,1.)); +#252094 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#252095 = ORIENTED_EDGE('',*,*,#252096,.T.); +#252096 = EDGE_CURVE('',#252088,#252097,#252099,.T.); +#252097 = VERTEX_POINT('',#252098); +#252098 = CARTESIAN_POINT('',(176.990307,-43.422919,1.585)); +#252099 = LINE('',#252100,#252101); +#252100 = CARTESIAN_POINT('',(177.192992,-43.422919,1.585)); +#252101 = VECTOR('',#252102,1.); +#252102 = DIRECTION('',(-1.,0.,0.)); +#252103 = ORIENTED_EDGE('',*,*,#252104,.T.); +#252104 = EDGE_CURVE('',#252097,#252105,#252107,.T.); +#252105 = VERTEX_POINT('',#252106); +#252106 = CARTESIAN_POINT('',(176.921791,-43.457177,1.585)); +#252107 = LINE('',#252108,#252109); +#252108 = CARTESIAN_POINT('',(176.990307,-43.422919,1.585)); +#252109 = VECTOR('',#252110,1.); +#252110 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#252111 = ORIENTED_EDGE('',*,*,#252112,.T.); +#252112 = EDGE_CURVE('',#252105,#252113,#252115,.T.); +#252113 = VERTEX_POINT('',#252114); +#252114 = CARTESIAN_POINT('',(176.871413,-43.505517,1.585)); +#252115 = LINE('',#252116,#252117); +#252116 = CARTESIAN_POINT('',(176.921791,-43.457177,1.585)); +#252117 = VECTOR('',#252118,1.); +#252118 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#252119 = ORIENTED_EDGE('',*,*,#252120,.T.); +#252120 = EDGE_CURVE('',#252113,#252121,#252123,.T.); +#252121 = VERTEX_POINT('',#252122); +#252122 = CARTESIAN_POINT('',(176.776712,-43.390124,1.585)); +#252123 = CIRCLE('',#252124,7.499996838527E-02); +#252124 = AXIS2_PLACEMENT_3D('',#252125,#252126,#252127); +#252125 = CARTESIAN_POINT('',(176.829745,-43.44315697246,1.585)); +#252126 = DIRECTION('',(0.,0.,-1.)); +#252127 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#252128 = ORIENTED_EDGE('',*,*,#252129,.T.); +#252129 = EDGE_CURVE('',#252121,#251979,#252130,.T.); +#252130 = LINE('',#252131,#252132); +#252131 = CARTESIAN_POINT('',(176.776712,-43.390124,1.585)); +#252132 = VECTOR('',#252133,1.); +#252133 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#252134 = PLANE('',#252135); +#252135 = AXIS2_PLACEMENT_3D('',#252136,#252137,#252138); +#252136 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252137 = DIRECTION('',(0.,0.,1.)); +#252138 = DIRECTION('',(1.,0.,-0.)); +#252139 = SHELL_BASED_SURFACE_MODEL('',(#252140)); +#252140 = OPEN_SHELL('',(#252141)); +#252141 = ADVANCED_FACE('',(#252142),#252276,.T.); +#252142 = FACE_BOUND('',#252143,.F.); +#252143 = EDGE_LOOP('',(#252144,#252154,#252162,#252171,#252179,#252187, + #252196,#252204,#252213,#252221,#252229,#252237,#252245,#252254, + #252262,#252270)); +#252144 = ORIENTED_EDGE('',*,*,#252145,.T.); +#252145 = EDGE_CURVE('',#252146,#252148,#252150,.T.); +#252146 = VERTEX_POINT('',#252147); +#252147 = CARTESIAN_POINT('',(178.014752,-43.294941,1.585)); +#252148 = VERTEX_POINT('',#252149); +#252149 = CARTESIAN_POINT('',(178.053208,-43.27436,1.585)); +#252150 = LINE('',#252151,#252152); +#252151 = CARTESIAN_POINT('',(178.014752,-43.294941,1.585)); +#252152 = VECTOR('',#252153,1.); +#252153 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#252154 = ORIENTED_EDGE('',*,*,#252155,.T.); +#252155 = EDGE_CURVE('',#252148,#252156,#252158,.T.); +#252156 = VERTEX_POINT('',#252157); +#252157 = CARTESIAN_POINT('',(178.075045,-43.27436,1.585)); +#252158 = LINE('',#252159,#252160); +#252159 = CARTESIAN_POINT('',(178.053208,-43.27436,1.585)); +#252160 = VECTOR('',#252161,1.); +#252161 = DIRECTION('',(1.,0.,0.)); +#252162 = ORIENTED_EDGE('',*,*,#252163,.T.); +#252163 = EDGE_CURVE('',#252156,#252164,#252166,.T.); +#252164 = VERTEX_POINT('',#252165); +#252165 = CARTESIAN_POINT('',(178.14284,-43.347919,1.585)); +#252166 = CIRCLE('',#252167,7.216898094226E-02); +#252167 = AXIS2_PLACEMENT_3D('',#252168,#252169,#252170); +#252168 = CARTESIAN_POINT('',(178.07068706389,-43.34639728342,1.585)); +#252169 = DIRECTION('',(0.,0.,-1.)); +#252170 = DIRECTION('',(6.038516895227E-02,0.998175150648,0.)); +#252171 = ORIENTED_EDGE('',*,*,#252172,.T.); +#252172 = EDGE_CURVE('',#252164,#252173,#252175,.T.); +#252173 = VERTEX_POINT('',#252174); +#252174 = CARTESIAN_POINT('',(178.14284,-44.272919,1.585)); +#252175 = LINE('',#252176,#252177); +#252176 = CARTESIAN_POINT('',(178.14284,-43.347919,1.585)); +#252177 = VECTOR('',#252178,1.); +#252178 = DIRECTION('',(0.,-1.,0.)); +#252179 = ORIENTED_EDGE('',*,*,#252180,.T.); +#252180 = EDGE_CURVE('',#252173,#252181,#252183,.T.); +#252181 = VERTEX_POINT('',#252182); +#252182 = CARTESIAN_POINT('',(178.368186,-44.27436,1.585)); +#252183 = LINE('',#252184,#252185); +#252184 = CARTESIAN_POINT('',(178.14284,-44.272919,1.585)); +#252185 = VECTOR('',#252186,1.); +#252186 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#252187 = ORIENTED_EDGE('',*,*,#252188,.T.); +#252188 = EDGE_CURVE('',#252181,#252189,#252191,.T.); +#252189 = VERTEX_POINT('',#252190); +#252190 = CARTESIAN_POINT('',(178.353554,-44.422919,1.585)); +#252191 = CIRCLE('',#252192,7.500006711464E-02); +#252192 = AXIS2_PLACEMENT_3D('',#252193,#252194,#252195); +#252193 = CARTESIAN_POINT('',(178.35355406711,-44.34791893288,1.585)); +#252194 = DIRECTION('',(0.,0.,-1.)); +#252195 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#252196 = ORIENTED_EDGE('',*,*,#252197,.T.); +#252197 = EDGE_CURVE('',#252189,#252198,#252200,.T.); +#252198 = VERTEX_POINT('',#252199); +#252199 = CARTESIAN_POINT('',(177.767494,-44.421478,1.585)); +#252200 = LINE('',#252201,#252202); +#252201 = CARTESIAN_POINT('',(178.353554,-44.422919,1.585)); +#252202 = VECTOR('',#252203,1.); +#252203 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#252204 = ORIENTED_EDGE('',*,*,#252205,.T.); +#252205 = EDGE_CURVE('',#252198,#252206,#252208,.T.); +#252206 = VERTEX_POINT('',#252207); +#252207 = CARTESIAN_POINT('',(177.782126,-44.272919,1.585)); +#252208 = CIRCLE('',#252209,7.500006711464E-02); +#252209 = AXIS2_PLACEMENT_3D('',#252210,#252211,#252212); +#252210 = CARTESIAN_POINT('',(177.78212593288,-44.34791906711,1.585)); +#252211 = DIRECTION('',(0.,0.,-1.)); +#252212 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#252213 = ORIENTED_EDGE('',*,*,#252214,.T.); +#252214 = EDGE_CURVE('',#252206,#252215,#252217,.T.); +#252215 = VERTEX_POINT('',#252216); +#252216 = CARTESIAN_POINT('',(177.99284,-44.272919,1.585)); +#252217 = LINE('',#252218,#252219); +#252218 = CARTESIAN_POINT('',(177.782126,-44.272919,1.585)); +#252219 = VECTOR('',#252220,1.); +#252220 = DIRECTION('',(1.,0.,0.)); +#252221 = ORIENTED_EDGE('',*,*,#252222,.T.); +#252222 = EDGE_CURVE('',#252215,#252223,#252225,.T.); +#252223 = VERTEX_POINT('',#252224); +#252224 = CARTESIAN_POINT('',(177.99284,-43.576604,1.585)); +#252225 = LINE('',#252226,#252227); +#252226 = CARTESIAN_POINT('',(177.99284,-44.272919,1.585)); +#252227 = VECTOR('',#252228,1.); +#252228 = DIRECTION('',(0.,1.,0.)); +#252229 = ORIENTED_EDGE('',*,*,#252230,.T.); +#252230 = EDGE_CURVE('',#252223,#252231,#252233,.T.); +#252231 = VERTEX_POINT('',#252232); +#252232 = CARTESIAN_POINT('',(177.917204,-43.649131,1.585)); +#252233 = LINE('',#252234,#252235); +#252234 = CARTESIAN_POINT('',(177.99284,-43.576604,1.585)); +#252235 = VECTOR('',#252236,1.); +#252236 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#252237 = ORIENTED_EDGE('',*,*,#252238,.T.); +#252238 = EDGE_CURVE('',#252231,#252239,#252241,.T.); +#252239 = VERTEX_POINT('',#252240); +#252240 = CARTESIAN_POINT('',(177.801935,-43.70597,1.585)); +#252241 = LINE('',#252242,#252243); +#252242 = CARTESIAN_POINT('',(177.917204,-43.649131,1.585)); +#252243 = VECTOR('',#252244,1.); +#252244 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#252245 = ORIENTED_EDGE('',*,*,#252246,.T.); +#252246 = EDGE_CURVE('',#252239,#252247,#252249,.T.); +#252247 = VERTEX_POINT('',#252248); +#252248 = CARTESIAN_POINT('',(177.748585,-43.566551,1.585)); +#252249 = CIRCLE('',#252250,7.500005272361E-02); +#252250 = AXIS2_PLACEMENT_3D('',#252251,#252252,#252253); +#252251 = CARTESIAN_POINT('',(177.78212555676,-43.63363332972,1.585)); +#252252 = DIRECTION('',(0.,0.,-1.)); +#252253 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#252254 = ORIENTED_EDGE('',*,*,#252255,.T.); +#252255 = EDGE_CURVE('',#252247,#252256,#252258,.T.); +#252256 = VERTEX_POINT('',#252257); +#252257 = CARTESIAN_POINT('',(177.832937,-43.524375,1.585)); +#252258 = LINE('',#252259,#252260); +#252259 = CARTESIAN_POINT('',(177.748585,-43.566551,1.585)); +#252260 = VECTOR('',#252261,1.); +#252261 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#252262 = ORIENTED_EDGE('',*,*,#252263,.T.); +#252263 = EDGE_CURVE('',#252256,#252264,#252266,.T.); +#252264 = VERTEX_POINT('',#252265); +#252265 = CARTESIAN_POINT('',(177.914316,-43.442996,1.585)); +#252266 = LINE('',#252267,#252268); +#252267 = CARTESIAN_POINT('',(177.832937,-43.524375,1.585)); +#252268 = VECTOR('',#252269,1.); +#252269 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#252270 = ORIENTED_EDGE('',*,*,#252271,.T.); +#252271 = EDGE_CURVE('',#252264,#252146,#252272,.T.); +#252272 = LINE('',#252273,#252274); +#252273 = CARTESIAN_POINT('',(177.914316,-43.442996,1.585)); +#252274 = VECTOR('',#252275,1.); +#252275 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#252276 = PLANE('',#252277); +#252277 = AXIS2_PLACEMENT_3D('',#252278,#252279,#252280); +#252278 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252279 = DIRECTION('',(0.,0.,1.)); +#252280 = DIRECTION('',(1.,0.,-0.)); +#252281 = SHELL_BASED_SURFACE_MODEL('',(#252282)); +#252282 = OPEN_SHELL('',(#252283)); +#252283 = ADVANCED_FACE('',(#252284,#252395),#252447,.T.); +#252284 = FACE_BOUND('',#252285,.F.); +#252285 = EDGE_LOOP('',(#252286,#252297,#252305,#252314,#252322,#252331, + #252339,#252347,#252356,#252364,#252372,#252380,#252389)); +#252286 = ORIENTED_EDGE('',*,*,#252287,.T.); +#252287 = EDGE_CURVE('',#252288,#252290,#252292,.T.); +#252288 = VERTEX_POINT('',#252289); +#252289 = CARTESIAN_POINT('',(172.578805,-43.333287,1.585)); +#252290 = VERTEX_POINT('',#252291); +#252291 = CARTESIAN_POINT('',(172.652364,-43.272919,1.585)); +#252292 = CIRCLE('',#252293,7.500074938988E-02); +#252293 = AXIS2_PLACEMENT_3D('',#252294,#252295,#252296); +#252294 = CARTESIAN_POINT('',(172.65236446611,-43.34791974938,1.585)); +#252295 = DIRECTION('',(0.,0.,-1.)); +#252296 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#252297 = ORIENTED_EDGE('',*,*,#252298,.T.); +#252298 = EDGE_CURVE('',#252290,#252299,#252301,.T.); +#252299 = VERTEX_POINT('',#252300); +#252300 = CARTESIAN_POINT('',(173.047948,-43.27436,1.585)); +#252301 = LINE('',#252302,#252303); +#252302 = CARTESIAN_POINT('',(172.652364,-43.272919,1.585)); +#252303 = VECTOR('',#252304,1.); +#252304 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#252305 = ORIENTED_EDGE('',*,*,#252306,.T.); +#252306 = EDGE_CURVE('',#252299,#252307,#252309,.T.); +#252307 = VERTEX_POINT('',#252308); +#252308 = CARTESIAN_POINT('',(173.297351,-43.523763,1.585)); +#252309 = CIRCLE('',#252310,0.347870264855); +#252310 = AXIS2_PLACEMENT_3D('',#252311,#252312,#252313); +#252311 = CARTESIAN_POINT('',(172.96062026502,-43.61109073497,1.585)); +#252312 = DIRECTION('',(0.,0.,-1.)); +#252313 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#252314 = ORIENTED_EDGE('',*,*,#252315,.T.); +#252315 = EDGE_CURVE('',#252307,#252316,#252318,.T.); +#252316 = VERTEX_POINT('',#252317); +#252317 = CARTESIAN_POINT('',(173.296129,-43.701062,1.585)); +#252318 = LINE('',#252319,#252320); +#252319 = CARTESIAN_POINT('',(173.297351,-43.523763,1.585)); +#252320 = VECTOR('',#252321,1.); +#252321 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#252322 = ORIENTED_EDGE('',*,*,#252323,.T.); +#252323 = EDGE_CURVE('',#252316,#252324,#252326,.T.); +#252324 = VERTEX_POINT('',#252325); +#252325 = CARTESIAN_POINT('',(173.047948,-43.945287,1.585)); +#252326 = CIRCLE('',#252327,0.348632345849); +#252327 = AXIS2_PLACEMENT_3D('',#252328,#252329,#252330); +#252328 = CARTESIAN_POINT('',(172.96017919403,-43.6078834593,1.585)); +#252329 = DIRECTION('',(0.,0.,-1.)); +#252330 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#252331 = ORIENTED_EDGE('',*,*,#252332,.T.); +#252332 = EDGE_CURVE('',#252324,#252333,#252335,.T.); +#252333 = VERTEX_POINT('',#252334); +#252334 = CARTESIAN_POINT('',(173.034431,-43.946618,1.585)); +#252335 = LINE('',#252336,#252337); +#252336 = CARTESIAN_POINT('',(173.047948,-43.945287,1.585)); +#252337 = VECTOR('',#252338,1.); +#252338 = DIRECTION('',(-0.995186940545,-9.799465989996E-02,0.)); +#252339 = ORIENTED_EDGE('',*,*,#252340,.T.); +#252340 = EDGE_CURVE('',#252333,#252341,#252343,.T.); +#252341 = VERTEX_POINT('',#252342); +#252342 = CARTESIAN_POINT('',(173.292445,-44.317723,1.585)); +#252343 = LINE('',#252344,#252345); +#252344 = CARTESIAN_POINT('',(173.034431,-43.946618,1.585)); +#252345 = VECTOR('',#252346,1.); +#252346 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#252347 = ORIENTED_EDGE('',*,*,#252348,.T.); +#252348 = EDGE_CURVE('',#252341,#252349,#252351,.T.); +#252349 = VERTEX_POINT('',#252350); +#252350 = CARTESIAN_POINT('',(173.16235,-44.390929,1.585)); +#252351 = CIRCLE('',#252352,7.500005951702E-02); +#252352 = AXIS2_PLACEMENT_3D('',#252353,#252354,#252355); +#252353 = CARTESIAN_POINT('',(173.22379206294,-44.34791874739,1.585)); +#252354 = DIRECTION('',(0.,0.,-1.)); +#252355 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#252356 = ORIENTED_EDGE('',*,*,#252357,.T.); +#252357 = EDGE_CURVE('',#252349,#252358,#252360,.T.); +#252358 = VERTEX_POINT('',#252359); +#252359 = CARTESIAN_POINT('',(172.85141,-43.946728,1.585)); +#252360 = LINE('',#252361,#252362); +#252361 = CARTESIAN_POINT('',(173.16235,-44.390929,1.585)); +#252362 = VECTOR('',#252363,1.); +#252363 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#252364 = ORIENTED_EDGE('',*,*,#252365,.T.); +#252365 = EDGE_CURVE('',#252358,#252366,#252368,.T.); +#252366 = VERTEX_POINT('',#252367); +#252367 = CARTESIAN_POINT('',(172.727364,-43.946728,1.585)); +#252368 = LINE('',#252369,#252370); +#252369 = CARTESIAN_POINT('',(172.85141,-43.946728,1.585)); +#252370 = VECTOR('',#252371,1.); +#252371 = DIRECTION('',(-1.,0.,0.)); +#252372 = ORIENTED_EDGE('',*,*,#252373,.T.); +#252373 = EDGE_CURVE('',#252366,#252374,#252376,.T.); +#252374 = VERTEX_POINT('',#252375); +#252375 = CARTESIAN_POINT('',(172.725923,-44.362551,1.585)); +#252376 = LINE('',#252377,#252378); +#252377 = CARTESIAN_POINT('',(172.727364,-43.946728,1.585)); +#252378 = VECTOR('',#252379,1.); +#252379 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#252380 = ORIENTED_EDGE('',*,*,#252381,.T.); +#252381 = EDGE_CURVE('',#252374,#252382,#252384,.T.); +#252382 = VERTEX_POINT('',#252383); +#252383 = CARTESIAN_POINT('',(172.577364,-44.347919,1.585)); +#252384 = CIRCLE('',#252385,7.500006711464E-02); +#252385 = AXIS2_PLACEMENT_3D('',#252386,#252387,#252388); +#252386 = CARTESIAN_POINT('',(172.65236406711,-44.34791906711,1.585)); +#252387 = DIRECTION('',(-0.,0.,-1.)); +#252388 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#252389 = ORIENTED_EDGE('',*,*,#252390,.T.); +#252390 = EDGE_CURVE('',#252382,#252288,#252391,.T.); +#252391 = LINE('',#252392,#252393); +#252392 = CARTESIAN_POINT('',(172.577364,-44.347919,1.585)); +#252393 = VECTOR('',#252394,1.); +#252394 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#252395 = FACE_BOUND('',#252396,.F.); +#252396 = EDGE_LOOP('',(#252397,#252408,#252416,#252424,#252432,#252441) + ); +#252397 = ORIENTED_EDGE('',*,*,#252398,.T.); +#252398 = EDGE_CURVE('',#252399,#252401,#252403,.T.); +#252399 = VERTEX_POINT('',#252400); +#252400 = CARTESIAN_POINT('',(173.148792,-43.5561,1.585)); +#252401 = VERTEX_POINT('',#252402); +#252402 = CARTESIAN_POINT('',(173.015611,-43.422919,1.585)); +#252403 = CIRCLE('',#252404,0.18686440374); +#252404 = AXIS2_PLACEMENT_3D('',#252405,#252406,#252407); +#252405 = CARTESIAN_POINT('',(172.968075,-43.603636,1.585)); +#252406 = DIRECTION('',(0.,0.,1.)); +#252407 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#252408 = ORIENTED_EDGE('',*,*,#252409,.T.); +#252409 = EDGE_CURVE('',#252401,#252410,#252412,.T.); +#252410 = VERTEX_POINT('',#252411); +#252411 = CARTESIAN_POINT('',(172.727364,-43.422919,1.585)); +#252412 = LINE('',#252413,#252414); +#252413 = CARTESIAN_POINT('',(173.015611,-43.422919,1.585)); +#252414 = VECTOR('',#252415,1.); +#252415 = DIRECTION('',(-1.,0.,0.)); +#252416 = ORIENTED_EDGE('',*,*,#252417,.T.); +#252417 = EDGE_CURVE('',#252410,#252418,#252420,.T.); +#252418 = VERTEX_POINT('',#252419); +#252419 = CARTESIAN_POINT('',(172.727364,-43.796728,1.585)); +#252420 = LINE('',#252421,#252422); +#252421 = CARTESIAN_POINT('',(172.727364,-43.422919,1.585)); +#252422 = VECTOR('',#252423,1.); +#252423 = DIRECTION('',(0.,-1.,0.)); +#252424 = ORIENTED_EDGE('',*,*,#252425,.T.); +#252425 = EDGE_CURVE('',#252418,#252426,#252428,.T.); +#252426 = VERTEX_POINT('',#252427); +#252427 = CARTESIAN_POINT('',(173.015611,-43.796728,1.585)); +#252428 = LINE('',#252429,#252430); +#252429 = CARTESIAN_POINT('',(172.727364,-43.796728,1.585)); +#252430 = VECTOR('',#252431,1.); +#252431 = DIRECTION('',(1.,0.,0.)); +#252432 = ORIENTED_EDGE('',*,*,#252433,.T.); +#252433 = EDGE_CURVE('',#252426,#252434,#252436,.T.); +#252434 = VERTEX_POINT('',#252435); +#252435 = CARTESIAN_POINT('',(173.148792,-43.663547,1.585)); +#252436 = CIRCLE('',#252437,0.18686440374); +#252437 = AXIS2_PLACEMENT_3D('',#252438,#252439,#252440); +#252438 = CARTESIAN_POINT('',(172.968075,-43.616011,1.585)); +#252439 = DIRECTION('',(0.,0.,1.)); +#252440 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#252441 = ORIENTED_EDGE('',*,*,#252442,.T.); +#252442 = EDGE_CURVE('',#252434,#252399,#252443,.T.); +#252443 = LINE('',#252444,#252445); +#252444 = CARTESIAN_POINT('',(173.148792,-43.663547,1.585)); +#252445 = VECTOR('',#252446,1.); +#252446 = DIRECTION('',(0.,1.,0.)); +#252447 = PLANE('',#252448); +#252448 = AXIS2_PLACEMENT_3D('',#252449,#252450,#252451); +#252449 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252450 = DIRECTION('',(0.,0.,1.)); +#252451 = DIRECTION('',(1.,0.,-0.)); +#252452 = SHELL_BASED_SURFACE_MODEL('',(#252453)); +#252453 = OPEN_SHELL('',(#252454)); +#252454 = ADVANCED_FACE('',(#252455,#252566),#252618,.T.); +#252455 = FACE_BOUND('',#252456,.F.); +#252456 = EDGE_LOOP('',(#252457,#252468,#252476,#252485,#252493,#252502, + #252510,#252518,#252527,#252535,#252543,#252551,#252560)); +#252457 = ORIENTED_EDGE('',*,*,#252458,.T.); +#252458 = EDGE_CURVE('',#252459,#252461,#252463,.T.); +#252459 = VERTEX_POINT('',#252460); +#252460 = CARTESIAN_POINT('',(175.803805,-43.333287,1.585)); +#252461 = VERTEX_POINT('',#252462); +#252462 = CARTESIAN_POINT('',(175.877364,-43.272919,1.585)); +#252463 = CIRCLE('',#252464,7.500074938978E-02); +#252464 = AXIS2_PLACEMENT_3D('',#252465,#252466,#252467); +#252465 = CARTESIAN_POINT('',(175.87736446611,-43.34791974938,1.585)); +#252466 = DIRECTION('',(0.,0.,-1.)); +#252467 = DIRECTION('',(-0.980783081614,0.195101375751,0.)); +#252468 = ORIENTED_EDGE('',*,*,#252469,.T.); +#252469 = EDGE_CURVE('',#252461,#252470,#252472,.T.); +#252470 = VERTEX_POINT('',#252471); +#252471 = CARTESIAN_POINT('',(176.272948,-43.27436,1.585)); +#252472 = LINE('',#252473,#252474); +#252473 = CARTESIAN_POINT('',(175.877364,-43.272919,1.585)); +#252474 = VECTOR('',#252475,1.); +#252475 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#252476 = ORIENTED_EDGE('',*,*,#252477,.T.); +#252477 = EDGE_CURVE('',#252470,#252478,#252480,.T.); +#252478 = VERTEX_POINT('',#252479); +#252479 = CARTESIAN_POINT('',(176.522351,-43.523763,1.585)); +#252480 = CIRCLE('',#252481,0.347870264855); +#252481 = AXIS2_PLACEMENT_3D('',#252482,#252483,#252484); +#252482 = CARTESIAN_POINT('',(176.18562026502,-43.61109073497,1.585)); +#252483 = DIRECTION('',(0.,0.,-1.)); +#252484 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#252485 = ORIENTED_EDGE('',*,*,#252486,.T.); +#252486 = EDGE_CURVE('',#252478,#252487,#252489,.T.); +#252487 = VERTEX_POINT('',#252488); +#252488 = CARTESIAN_POINT('',(176.521129,-43.701062,1.585)); +#252489 = LINE('',#252490,#252491); +#252490 = CARTESIAN_POINT('',(176.522351,-43.523763,1.585)); +#252491 = VECTOR('',#252492,1.); +#252492 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#252493 = ORIENTED_EDGE('',*,*,#252494,.T.); +#252494 = EDGE_CURVE('',#252487,#252495,#252497,.T.); +#252495 = VERTEX_POINT('',#252496); +#252496 = CARTESIAN_POINT('',(176.272948,-43.945287,1.585)); +#252497 = CIRCLE('',#252498,0.348632345849); +#252498 = AXIS2_PLACEMENT_3D('',#252499,#252500,#252501); +#252499 = CARTESIAN_POINT('',(176.18517919403,-43.6078834593,1.585)); +#252500 = DIRECTION('',(0.,0.,-1.)); +#252501 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#252502 = ORIENTED_EDGE('',*,*,#252503,.T.); +#252503 = EDGE_CURVE('',#252495,#252504,#252506,.T.); +#252504 = VERTEX_POINT('',#252505); +#252505 = CARTESIAN_POINT('',(176.259431,-43.946618,1.585)); +#252506 = LINE('',#252507,#252508); +#252507 = CARTESIAN_POINT('',(176.272948,-43.945287,1.585)); +#252508 = VECTOR('',#252509,1.); +#252509 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#252510 = ORIENTED_EDGE('',*,*,#252511,.T.); +#252511 = EDGE_CURVE('',#252504,#252512,#252514,.T.); +#252512 = VERTEX_POINT('',#252513); +#252513 = CARTESIAN_POINT('',(176.517445,-44.317723,1.585)); +#252514 = LINE('',#252515,#252516); +#252515 = CARTESIAN_POINT('',(176.259431,-43.946618,1.585)); +#252516 = VECTOR('',#252517,1.); +#252517 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#252518 = ORIENTED_EDGE('',*,*,#252519,.T.); +#252519 = EDGE_CURVE('',#252512,#252520,#252522,.T.); +#252520 = VERTEX_POINT('',#252521); +#252521 = CARTESIAN_POINT('',(176.38735,-44.390929,1.585)); +#252522 = CIRCLE('',#252523,7.500005951702E-02); +#252523 = AXIS2_PLACEMENT_3D('',#252524,#252525,#252526); +#252524 = CARTESIAN_POINT('',(176.44879206294,-44.34791874739,1.585)); +#252525 = DIRECTION('',(0.,0.,-1.)); +#252526 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#252527 = ORIENTED_EDGE('',*,*,#252528,.T.); +#252528 = EDGE_CURVE('',#252520,#252529,#252531,.T.); +#252529 = VERTEX_POINT('',#252530); +#252530 = CARTESIAN_POINT('',(176.07641,-43.946728,1.585)); +#252531 = LINE('',#252532,#252533); +#252532 = CARTESIAN_POINT('',(176.38735,-44.390929,1.585)); +#252533 = VECTOR('',#252534,1.); +#252534 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#252535 = ORIENTED_EDGE('',*,*,#252536,.T.); +#252536 = EDGE_CURVE('',#252529,#252537,#252539,.T.); +#252537 = VERTEX_POINT('',#252538); +#252538 = CARTESIAN_POINT('',(175.952364,-43.946728,1.585)); +#252539 = LINE('',#252540,#252541); +#252540 = CARTESIAN_POINT('',(176.07641,-43.946728,1.585)); +#252541 = VECTOR('',#252542,1.); +#252542 = DIRECTION('',(-1.,0.,0.)); +#252543 = ORIENTED_EDGE('',*,*,#252544,.T.); +#252544 = EDGE_CURVE('',#252537,#252545,#252547,.T.); +#252545 = VERTEX_POINT('',#252546); +#252546 = CARTESIAN_POINT('',(175.950923,-44.362551,1.585)); +#252547 = LINE('',#252548,#252549); +#252548 = CARTESIAN_POINT('',(175.952364,-43.946728,1.585)); +#252549 = VECTOR('',#252550,1.); +#252550 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#252551 = ORIENTED_EDGE('',*,*,#252552,.T.); +#252552 = EDGE_CURVE('',#252545,#252553,#252555,.T.); +#252553 = VERTEX_POINT('',#252554); +#252554 = CARTESIAN_POINT('',(175.802364,-44.347919,1.585)); +#252555 = CIRCLE('',#252556,7.500006711463E-02); +#252556 = AXIS2_PLACEMENT_3D('',#252557,#252558,#252559); +#252557 = CARTESIAN_POINT('',(175.87736406711,-44.34791906711,1.585)); +#252558 = DIRECTION('',(-0.,0.,-1.)); +#252559 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#252560 = ORIENTED_EDGE('',*,*,#252561,.T.); +#252561 = EDGE_CURVE('',#252553,#252459,#252562,.T.); +#252562 = LINE('',#252563,#252564); +#252563 = CARTESIAN_POINT('',(175.802364,-44.347919,1.585)); +#252564 = VECTOR('',#252565,1.); +#252565 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#252566 = FACE_BOUND('',#252567,.F.); +#252567 = EDGE_LOOP('',(#252568,#252579,#252587,#252595,#252603,#252612) + ); +#252568 = ORIENTED_EDGE('',*,*,#252569,.T.); +#252569 = EDGE_CURVE('',#252570,#252572,#252574,.T.); +#252570 = VERTEX_POINT('',#252571); +#252571 = CARTESIAN_POINT('',(176.373792,-43.5561,1.585)); +#252572 = VERTEX_POINT('',#252573); +#252573 = CARTESIAN_POINT('',(176.240611,-43.422919,1.585)); +#252574 = CIRCLE('',#252575,0.18686440374); +#252575 = AXIS2_PLACEMENT_3D('',#252576,#252577,#252578); +#252576 = CARTESIAN_POINT('',(176.193075,-43.603636,1.585)); +#252577 = DIRECTION('',(0.,0.,1.)); +#252578 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#252579 = ORIENTED_EDGE('',*,*,#252580,.T.); +#252580 = EDGE_CURVE('',#252572,#252581,#252583,.T.); +#252581 = VERTEX_POINT('',#252582); +#252582 = CARTESIAN_POINT('',(175.952364,-43.422919,1.585)); +#252583 = LINE('',#252584,#252585); +#252584 = CARTESIAN_POINT('',(176.240611,-43.422919,1.585)); +#252585 = VECTOR('',#252586,1.); +#252586 = DIRECTION('',(-1.,0.,0.)); +#252587 = ORIENTED_EDGE('',*,*,#252588,.T.); +#252588 = EDGE_CURVE('',#252581,#252589,#252591,.T.); +#252589 = VERTEX_POINT('',#252590); +#252590 = CARTESIAN_POINT('',(175.952364,-43.796728,1.585)); +#252591 = LINE('',#252592,#252593); +#252592 = CARTESIAN_POINT('',(175.952364,-43.422919,1.585)); +#252593 = VECTOR('',#252594,1.); +#252594 = DIRECTION('',(0.,-1.,0.)); +#252595 = ORIENTED_EDGE('',*,*,#252596,.T.); +#252596 = EDGE_CURVE('',#252589,#252597,#252599,.T.); +#252597 = VERTEX_POINT('',#252598); +#252598 = CARTESIAN_POINT('',(176.240611,-43.796728,1.585)); +#252599 = LINE('',#252600,#252601); +#252600 = CARTESIAN_POINT('',(175.952364,-43.796728,1.585)); +#252601 = VECTOR('',#252602,1.); +#252602 = DIRECTION('',(1.,0.,0.)); +#252603 = ORIENTED_EDGE('',*,*,#252604,.T.); +#252604 = EDGE_CURVE('',#252597,#252605,#252607,.T.); +#252605 = VERTEX_POINT('',#252606); +#252606 = CARTESIAN_POINT('',(176.373792,-43.663547,1.585)); +#252607 = CIRCLE('',#252608,0.18686440374); +#252608 = AXIS2_PLACEMENT_3D('',#252609,#252610,#252611); +#252609 = CARTESIAN_POINT('',(176.193075,-43.616011,1.585)); +#252610 = DIRECTION('',(0.,0.,1.)); +#252611 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#252612 = ORIENTED_EDGE('',*,*,#252613,.T.); +#252613 = EDGE_CURVE('',#252605,#252570,#252614,.T.); +#252614 = LINE('',#252615,#252616); +#252615 = CARTESIAN_POINT('',(176.373792,-43.663547,1.585)); +#252616 = VECTOR('',#252617,1.); +#252617 = DIRECTION('',(0.,1.,0.)); +#252618 = PLANE('',#252619); +#252619 = AXIS2_PLACEMENT_3D('',#252620,#252621,#252622); +#252620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252621 = DIRECTION('',(0.,0.,1.)); +#252622 = DIRECTION('',(1.,0.,-0.)); +#252623 = SHELL_BASED_SURFACE_MODEL('',(#252624)); +#252624 = OPEN_SHELL('',(#252625)); +#252625 = ADVANCED_FACE('',(#252626),#252811,.T.); +#252626 = FACE_BOUND('',#252627,.F.); +#252627 = EDGE_LOOP('',(#252628,#252639,#252647,#252656,#252664,#252673, + #252681,#252690,#252698,#252706,#252714,#252723,#252731,#252740, + #252748,#252757,#252765,#252773,#252781,#252789,#252797,#252805)); +#252628 = ORIENTED_EDGE('',*,*,#252629,.T.); +#252629 = EDGE_CURVE('',#252630,#252632,#252634,.T.); +#252630 = VERTEX_POINT('',#252631); +#252631 = CARTESIAN_POINT('',(167.117602,-43.330381,1.585)); +#252632 = VERTEX_POINT('',#252633); +#252633 = CARTESIAN_POINT('',(167.577365,-43.333178,1.585)); +#252634 = CIRCLE('',#252635,0.460785175821); +#252635 = AXIS2_PLACEMENT_3D('',#252636,#252637,#252638); +#252636 = CARTESIAN_POINT('',(167.34505410897,-43.73111597024,1.585)); +#252637 = DIRECTION('',(0.,0.,-1.)); +#252638 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#252639 = ORIENTED_EDGE('',*,*,#252640,.T.); +#252640 = EDGE_CURVE('',#252632,#252641,#252643,.T.); +#252641 = VERTEX_POINT('',#252642); +#252642 = CARTESIAN_POINT('',(167.645676,-43.401489,1.585)); +#252643 = LINE('',#252644,#252645); +#252644 = CARTESIAN_POINT('',(167.577365,-43.333178,1.585)); +#252645 = VECTOR('',#252646,1.); +#252646 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#252647 = ORIENTED_EDGE('',*,*,#252648,.T.); +#252648 = EDGE_CURVE('',#252641,#252649,#252651,.T.); +#252649 = VERTEX_POINT('',#252650); +#252650 = CARTESIAN_POINT('',(167.530283,-43.49619,1.585)); +#252651 = CIRCLE('',#252652,7.500003178656E-02); +#252652 = AXIS2_PLACEMENT_3D('',#252653,#252654,#252655); +#252653 = CARTESIAN_POINT('',(167.58331556212,-43.4431565,1.585)); +#252654 = DIRECTION('',(0.,0.,-1.)); +#252655 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#252656 = ORIENTED_EDGE('',*,*,#252657,.T.); +#252657 = EDGE_CURVE('',#252649,#252658,#252660,.T.); +#252658 = VERTEX_POINT('',#252659); +#252659 = CARTESIAN_POINT('',(167.495183,-43.46109,1.585)); +#252660 = LINE('',#252661,#252662); +#252661 = CARTESIAN_POINT('',(167.530283,-43.49619,1.585)); +#252662 = VECTOR('',#252663,1.); +#252663 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#252664 = ORIENTED_EDGE('',*,*,#252665,.T.); +#252665 = EDGE_CURVE('',#252658,#252666,#252668,.T.); +#252666 = VERTEX_POINT('',#252667); +#252667 = CARTESIAN_POINT('',(167.195259,-43.46109,1.585)); +#252668 = CIRCLE('',#252669,0.299308637371); +#252669 = AXIS2_PLACEMENT_3D('',#252670,#252671,#252672); +#252670 = CARTESIAN_POINT('',(167.345221,-43.720121,1.585)); +#252671 = DIRECTION('',(0.,0.,1.)); +#252672 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#252673 = ORIENTED_EDGE('',*,*,#252674,.T.); +#252674 = EDGE_CURVE('',#252666,#252675,#252677,.T.); +#252675 = VERTEX_POINT('',#252676); +#252676 = CARTESIAN_POINT('',(167.121146,-43.535203,1.585)); +#252677 = LINE('',#252678,#252679); +#252678 = CARTESIAN_POINT('',(167.195259,-43.46109,1.585)); +#252679 = VECTOR('',#252680,1.); +#252680 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#252681 = ORIENTED_EDGE('',*,*,#252682,.T.); +#252682 = EDGE_CURVE('',#252675,#252683,#252685,.T.); +#252683 = VERTEX_POINT('',#252684); +#252684 = CARTESIAN_POINT('',(167.039269,-43.910113,1.585)); +#252685 = CIRCLE('',#252686,0.611712714363); +#252686 = AXIS2_PLACEMENT_3D('',#252687,#252688,#252689); +#252687 = CARTESIAN_POINT('',(167.64767427521,-43.8465876822,1.585)); +#252688 = DIRECTION('',(0.,0.,1.)); +#252689 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#252690 = ORIENTED_EDGE('',*,*,#252691,.T.); +#252691 = EDGE_CURVE('',#252683,#252692,#252694,.T.); +#252692 = VERTEX_POINT('',#252693); +#252693 = CARTESIAN_POINT('',(167.082652,-44.083647,1.585)); +#252694 = LINE('',#252695,#252696); +#252695 = CARTESIAN_POINT('',(167.039269,-43.910113,1.585)); +#252696 = VECTOR('',#252697,1.); +#252697 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#252698 = ORIENTED_EDGE('',*,*,#252699,.T.); +#252699 = EDGE_CURVE('',#252692,#252700,#252702,.T.); +#252700 = VERTEX_POINT('',#252701); +#252701 = CARTESIAN_POINT('',(167.121146,-44.160634,1.585)); +#252702 = LINE('',#252703,#252704); +#252703 = CARTESIAN_POINT('',(167.082652,-44.083647,1.585)); +#252704 = VECTOR('',#252705,1.); +#252705 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#252706 = ORIENTED_EDGE('',*,*,#252707,.T.); +#252707 = EDGE_CURVE('',#252700,#252708,#252710,.T.); +#252708 = VERTEX_POINT('',#252709); +#252709 = CARTESIAN_POINT('',(167.195259,-44.234748,1.585)); +#252710 = LINE('',#252711,#252712); +#252711 = CARTESIAN_POINT('',(167.121146,-44.160634,1.585)); +#252712 = VECTOR('',#252713,1.); +#252713 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#252714 = ORIENTED_EDGE('',*,*,#252715,.T.); +#252715 = EDGE_CURVE('',#252708,#252716,#252718,.T.); +#252716 = VERTEX_POINT('',#252717); +#252717 = CARTESIAN_POINT('',(167.495183,-44.234747,1.585)); +#252718 = CIRCLE('',#252719,0.299305962385); +#252719 = AXIS2_PLACEMENT_3D('',#252720,#252721,#252722); +#252720 = CARTESIAN_POINT('',(167.34522013635,-43.97571959093,1.585)); +#252721 = DIRECTION('',(0.,0.,1.)); +#252722 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#252723 = ORIENTED_EDGE('',*,*,#252724,.T.); +#252724 = EDGE_CURVE('',#252716,#252725,#252727,.T.); +#252725 = VERTEX_POINT('',#252726); +#252726 = CARTESIAN_POINT('',(167.541648,-44.19032,1.585)); +#252727 = LINE('',#252728,#252729); +#252728 = CARTESIAN_POINT('',(167.495183,-44.234747,1.585)); +#252729 = VECTOR('',#252730,1.); +#252730 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#252731 = ORIENTED_EDGE('',*,*,#252732,.T.); +#252732 = EDGE_CURVE('',#252725,#252733,#252735,.T.); +#252733 = VERTEX_POINT('',#252734); +#252734 = CARTESIAN_POINT('',(167.636349,-44.305713,1.585)); +#252735 = CIRCLE('',#252736,7.499993690111E-02); +#252736 = AXIS2_PLACEMENT_3D('',#252737,#252738,#252739); +#252737 = CARTESIAN_POINT('',(167.5833162483,-44.25267982374,1.585)); +#252738 = DIRECTION('',(0.,0.,-1.)); +#252739 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#252740 = ORIENTED_EDGE('',*,*,#252741,.T.); +#252741 = EDGE_CURVE('',#252733,#252742,#252744,.T.); +#252742 = VERTEX_POINT('',#252743); +#252743 = CARTESIAN_POINT('',(167.572839,-44.365457,1.585)); +#252744 = LINE('',#252745,#252746); +#252745 = CARTESIAN_POINT('',(167.636349,-44.305713,1.585)); +#252746 = VECTOR('',#252747,1.); +#252747 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#252748 = ORIENTED_EDGE('',*,*,#252749,.T.); +#252749 = EDGE_CURVE('',#252742,#252750,#252752,.T.); +#252750 = VERTEX_POINT('',#252751); +#252751 = CARTESIAN_POINT('',(167.113077,-44.362661,1.585)); +#252752 = CIRCLE('',#252753,0.461067828848); +#252753 = AXIS2_PLACEMENT_3D('',#252754,#252755,#252756); +#252754 = CARTESIAN_POINT('',(167.34538851268,-43.96439613352,1.585)); +#252755 = DIRECTION('',(-0.,0.,-1.)); +#252756 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#252757 = ORIENTED_EDGE('',*,*,#252758,.T.); +#252758 = EDGE_CURVE('',#252750,#252759,#252761,.T.); +#252759 = VERTEX_POINT('',#252760); +#252760 = CARTESIAN_POINT('',(166.996388,-44.244898,1.585)); +#252761 = LINE('',#252762,#252763); +#252762 = CARTESIAN_POINT('',(167.113077,-44.362661,1.585)); +#252763 = VECTOR('',#252764,1.); +#252764 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#252765 = ORIENTED_EDGE('',*,*,#252766,.T.); +#252766 = EDGE_CURVE('',#252759,#252767,#252769,.T.); +#252767 = VERTEX_POINT('',#252768); +#252768 = CARTESIAN_POINT('',(166.939127,-44.128013,1.585)); +#252769 = LINE('',#252770,#252771); +#252770 = CARTESIAN_POINT('',(166.996388,-44.244898,1.585)); +#252771 = VECTOR('',#252772,1.); +#252772 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#252773 = ORIENTED_EDGE('',*,*,#252774,.T.); +#252774 = EDGE_CURVE('',#252767,#252775,#252777,.T.); +#252775 = VERTEX_POINT('',#252776); +#252776 = CARTESIAN_POINT('',(166.889269,-43.919347,1.585)); +#252777 = LINE('',#252778,#252779); +#252778 = CARTESIAN_POINT('',(166.939127,-44.128013,1.585)); +#252779 = VECTOR('',#252780,1.); +#252780 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#252781 = ORIENTED_EDGE('',*,*,#252782,.T.); +#252782 = EDGE_CURVE('',#252775,#252783,#252785,.T.); +#252783 = VERTEX_POINT('',#252784); +#252784 = CARTESIAN_POINT('',(166.891508,-43.7583,1.585)); +#252785 = LINE('',#252786,#252787); +#252786 = CARTESIAN_POINT('',(166.889269,-43.919347,1.585)); +#252787 = VECTOR('',#252788,1.); +#252788 = DIRECTION('',(1.39014303055E-02,0.999903370449,0.)); +#252789 = ORIENTED_EDGE('',*,*,#252790,.T.); +#252790 = EDGE_CURVE('',#252783,#252791,#252793,.T.); +#252791 = VERTEX_POINT('',#252792); +#252792 = CARTESIAN_POINT('',(166.944806,-43.552473,1.585)); +#252793 = LINE('',#252794,#252795); +#252794 = CARTESIAN_POINT('',(166.891508,-43.7583,1.585)); +#252795 = VECTOR('',#252796,1.); +#252796 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#252797 = ORIENTED_EDGE('',*,*,#252798,.T.); +#252798 = EDGE_CURVE('',#252791,#252799,#252801,.T.); +#252799 = VERTEX_POINT('',#252800); +#252800 = CARTESIAN_POINT('',(167.001755,-43.443492,1.585)); +#252801 = LINE('',#252802,#252803); +#252802 = CARTESIAN_POINT('',(166.944806,-43.552473,1.585)); +#252803 = VECTOR('',#252804,1.); +#252804 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#252805 = ORIENTED_EDGE('',*,*,#252806,.T.); +#252806 = EDGE_CURVE('',#252799,#252630,#252807,.T.); +#252807 = LINE('',#252808,#252809); +#252808 = CARTESIAN_POINT('',(167.001755,-43.443492,1.585)); +#252809 = VECTOR('',#252810,1.); +#252810 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#252811 = PLANE('',#252812); +#252812 = AXIS2_PLACEMENT_3D('',#252813,#252814,#252815); +#252813 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252814 = DIRECTION('',(0.,0.,1.)); +#252815 = DIRECTION('',(1.,0.,-0.)); +#252816 = SHELL_BASED_SURFACE_MODEL('',(#252817)); +#252817 = OPEN_SHELL('',(#252818)); +#252818 = ADVANCED_FACE('',(#252819,#252937),#253005,.T.); +#252819 = FACE_BOUND('',#252820,.F.); +#252820 = EDGE_LOOP('',(#252821,#252832,#252840,#252848,#252857,#252865, + #252874,#252882,#252890,#252899,#252907,#252915,#252923,#252931)); +#252821 = ORIENTED_EDGE('',*,*,#252822,.T.); +#252822 = EDGE_CURVE('',#252823,#252825,#252827,.T.); +#252823 = VERTEX_POINT('',#252824); +#252824 = CARTESIAN_POINT('',(167.97022,-43.285559,1.585)); +#252825 = VERTEX_POINT('',#252826); +#252826 = CARTESIAN_POINT('',(168.086888,-43.347919,1.585)); +#252827 = CIRCLE('',#252828,7.500000000002E-02); +#252828 = AXIS2_PLACEMENT_3D('',#252829,#252830,#252831); +#252829 = CARTESIAN_POINT('',(168.011888,-43.34791906555,1.585)); +#252830 = DIRECTION('',(0.,0.,-1.)); +#252831 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#252832 = ORIENTED_EDGE('',*,*,#252833,.T.); +#252833 = EDGE_CURVE('',#252825,#252834,#252836,.T.); +#252834 = VERTEX_POINT('',#252835); +#252835 = CARTESIAN_POINT('',(168.087316,-43.608915,1.585)); +#252836 = LINE('',#252837,#252838); +#252837 = CARTESIAN_POINT('',(168.086888,-43.347919,1.585)); +#252838 = VECTOR('',#252839,1.); +#252839 = DIRECTION('',(1.639869670478E-03,-0.999998655413,0.)); +#252840 = ORIENTED_EDGE('',*,*,#252841,.T.); +#252841 = EDGE_CURVE('',#252834,#252842,#252844,.T.); +#252842 = VERTEX_POINT('',#252843); +#252843 = CARTESIAN_POINT('',(168.317411,-43.608915,1.585)); +#252844 = LINE('',#252845,#252846); +#252845 = CARTESIAN_POINT('',(168.087316,-43.608915,1.585)); +#252846 = VECTOR('',#252847,1.); +#252847 = DIRECTION('',(1.,0.,0.)); +#252848 = ORIENTED_EDGE('',*,*,#252849,.T.); +#252849 = EDGE_CURVE('',#252842,#252850,#252852,.T.); +#252850 = VERTEX_POINT('',#252851); +#252851 = CARTESIAN_POINT('',(168.561637,-43.857096,1.585)); +#252852 = CIRCLE('',#252853,0.348625649748); +#252853 = AXIS2_PLACEMENT_3D('',#252854,#252855,#252856); +#252854 = CARTESIAN_POINT('',(168.22423904586,-43.94485968387,1.585)); +#252855 = DIRECTION('',(0.,0.,-1.)); +#252856 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#252857 = ORIENTED_EDGE('',*,*,#252858,.T.); +#252858 = EDGE_CURVE('',#252850,#252859,#252861,.T.); +#252859 = VERTEX_POINT('',#252860); +#252860 = CARTESIAN_POINT('',(168.560415,-44.177252,1.585)); +#252861 = LINE('',#252862,#252863); +#252862 = CARTESIAN_POINT('',(168.561637,-43.857096,1.585)); +#252863 = VECTOR('',#252864,1.); +#252864 = DIRECTION('',(-3.816861463287E-03,-0.999992715758,0.)); +#252865 = ORIENTED_EDGE('',*,*,#252866,.T.); +#252866 = EDGE_CURVE('',#252859,#252867,#252869,.T.); +#252867 = VERTEX_POINT('',#252868); +#252868 = CARTESIAN_POINT('',(168.312234,-44.421478,1.585)); +#252869 = CIRCLE('',#252870,0.348635327447); +#252870 = AXIS2_PLACEMENT_3D('',#252871,#252872,#252873); +#252871 = CARTESIAN_POINT('',(168.22446248129,-44.08407208415,1.585)); +#252872 = DIRECTION('',(0.,0.,-1.)); +#252873 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#252874 = ORIENTED_EDGE('',*,*,#252875,.T.); +#252875 = EDGE_CURVE('',#252867,#252876,#252878,.T.); +#252876 = VERTEX_POINT('',#252877); +#252877 = CARTESIAN_POINT('',(168.087316,-44.420256,1.585)); +#252878 = LINE('',#252879,#252880); +#252879 = CARTESIAN_POINT('',(168.312234,-44.421478,1.585)); +#252880 = VECTOR('',#252881,1.); +#252881 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#252882 = ORIENTED_EDGE('',*,*,#252883,.T.); +#252883 = EDGE_CURVE('',#252876,#252884,#252886,.T.); +#252884 = VERTEX_POINT('',#252885); +#252885 = CARTESIAN_POINT('',(168.057084,-44.40675,1.585)); +#252886 = LINE('',#252887,#252888); +#252887 = CARTESIAN_POINT('',(168.087316,-44.420256,1.585)); +#252888 = VECTOR('',#252889,1.); +#252889 = DIRECTION('',(-0.913030248774,0.407891854325,0.)); +#252890 = ORIENTED_EDGE('',*,*,#252891,.T.); +#252891 = EDGE_CURVE('',#252884,#252892,#252894,.T.); +#252892 = VERTEX_POINT('',#252893); +#252893 = CARTESIAN_POINT('',(167.97022,-44.410279,1.585)); +#252894 = CIRCLE('',#252895,7.226397606087E-02); +#252895 = AXIS2_PLACEMENT_3D('',#252896,#252897,#252898); +#252896 = CARTESIAN_POINT('',(168.01130859538,-44.35083314593,1.585)); +#252897 = DIRECTION('',(-0.,0.,-1.)); +#252898 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#252899 = ORIENTED_EDGE('',*,*,#252900,.T.); +#252900 = EDGE_CURVE('',#252892,#252901,#252903,.T.); +#252901 = VERTEX_POINT('',#252902); +#252902 = CARTESIAN_POINT('',(167.949528,-44.389587,1.585)); +#252903 = LINE('',#252904,#252905); +#252904 = CARTESIAN_POINT('',(167.97022,-44.410279,1.585)); +#252905 = VECTOR('',#252906,1.); +#252906 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#252907 = ORIENTED_EDGE('',*,*,#252908,.T.); +#252908 = EDGE_CURVE('',#252901,#252909,#252911,.T.); +#252909 = VERTEX_POINT('',#252910); +#252910 = CARTESIAN_POINT('',(167.936888,-44.347919,1.585)); +#252911 = LINE('',#252912,#252913); +#252912 = CARTESIAN_POINT('',(167.949528,-44.389587,1.585)); +#252913 = VECTOR('',#252914,1.); +#252914 = DIRECTION('',(-0.290287839989,0.956939376321,0.)); +#252915 = ORIENTED_EDGE('',*,*,#252916,.T.); +#252916 = EDGE_CURVE('',#252909,#252917,#252919,.T.); +#252917 = VERTEX_POINT('',#252918); +#252918 = CARTESIAN_POINT('',(167.938329,-43.333287,1.585)); +#252919 = LINE('',#252920,#252921); +#252920 = CARTESIAN_POINT('',(167.936888,-44.347919,1.585)); +#252921 = VECTOR('',#252922,1.); +#252922 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#252923 = ORIENTED_EDGE('',*,*,#252924,.T.); +#252924 = EDGE_CURVE('',#252917,#252925,#252927,.T.); +#252925 = VERTEX_POINT('',#252926); +#252926 = CARTESIAN_POINT('',(167.949528,-43.306251,1.585)); +#252927 = LINE('',#252928,#252929); +#252928 = CARTESIAN_POINT('',(167.938329,-43.333287,1.585)); +#252929 = VECTOR('',#252930,1.); +#252930 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#252931 = ORIENTED_EDGE('',*,*,#252932,.T.); +#252932 = EDGE_CURVE('',#252925,#252823,#252933,.T.); +#252933 = LINE('',#252934,#252935); +#252934 = CARTESIAN_POINT('',(167.949528,-43.306251,1.585)); +#252935 = VECTOR('',#252936,1.); +#252936 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#252937 = FACE_BOUND('',#252938,.F.); +#252938 = EDGE_LOOP('',(#252939,#252950,#252958,#252966,#252974,#252982, + #252990,#252999)); +#252939 = ORIENTED_EDGE('',*,*,#252940,.T.); +#252940 = EDGE_CURVE('',#252941,#252943,#252945,.T.); +#252941 = VERTEX_POINT('',#252942); +#252942 = CARTESIAN_POINT('',(168.413078,-43.889433,1.585)); +#252943 = VERTEX_POINT('',#252944); +#252944 = CARTESIAN_POINT('',(168.279897,-43.756252,1.585)); +#252945 = CIRCLE('',#252946,0.18686440374); +#252946 = AXIS2_PLACEMENT_3D('',#252947,#252948,#252949); +#252947 = CARTESIAN_POINT('',(168.232361,-43.936969,1.585)); +#252948 = DIRECTION('',(0.,0.,1.)); +#252949 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#252950 = ORIENTED_EDGE('',*,*,#252951,.T.); +#252951 = EDGE_CURVE('',#252943,#252952,#252954,.T.); +#252952 = VERTEX_POINT('',#252953); +#252953 = CARTESIAN_POINT('',(168.124831,-43.756252,1.585)); +#252954 = LINE('',#252955,#252956); +#252955 = CARTESIAN_POINT('',(168.279897,-43.756252,1.585)); +#252956 = VECTOR('',#252957,1.); +#252957 = DIRECTION('',(-1.,0.,0.)); +#252958 = ORIENTED_EDGE('',*,*,#252959,.T.); +#252959 = EDGE_CURVE('',#252952,#252960,#252962,.T.); +#252960 = VERTEX_POINT('',#252961); +#252961 = CARTESIAN_POINT('',(168.086888,-43.775223,1.585)); +#252962 = LINE('',#252963,#252964); +#252963 = CARTESIAN_POINT('',(168.124831,-43.756252,1.585)); +#252964 = VECTOR('',#252965,1.); +#252965 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#252966 = ORIENTED_EDGE('',*,*,#252967,.T.); +#252967 = EDGE_CURVE('',#252960,#252968,#252970,.T.); +#252968 = VERTEX_POINT('',#252969); +#252969 = CARTESIAN_POINT('',(168.086888,-44.253947,1.585)); +#252970 = LINE('',#252971,#252972); +#252971 = CARTESIAN_POINT('',(168.086888,-43.775223,1.585)); +#252972 = VECTOR('',#252973,1.); +#252973 = DIRECTION('',(0.,-1.,0.)); +#252974 = ORIENTED_EDGE('',*,*,#252975,.T.); +#252975 = EDGE_CURVE('',#252968,#252976,#252978,.T.); +#252976 = VERTEX_POINT('',#252977); +#252977 = CARTESIAN_POINT('',(168.124831,-44.272919,1.585)); +#252978 = LINE('',#252979,#252980); +#252979 = CARTESIAN_POINT('',(168.086888,-44.253947,1.585)); +#252980 = VECTOR('',#252981,1.); +#252981 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#252982 = ORIENTED_EDGE('',*,*,#252983,.T.); +#252983 = EDGE_CURVE('',#252976,#252984,#252986,.T.); +#252984 = VERTEX_POINT('',#252985); +#252985 = CARTESIAN_POINT('',(168.279897,-44.272919,1.585)); +#252986 = LINE('',#252987,#252988); +#252987 = CARTESIAN_POINT('',(168.124831,-44.272919,1.585)); +#252988 = VECTOR('',#252989,1.); +#252989 = DIRECTION('',(1.,0.,0.)); +#252990 = ORIENTED_EDGE('',*,*,#252991,.T.); +#252991 = EDGE_CURVE('',#252984,#252992,#252994,.T.); +#252992 = VERTEX_POINT('',#252993); +#252993 = CARTESIAN_POINT('',(168.413078,-44.139737,1.585)); +#252994 = CIRCLE('',#252995,0.186867760544); +#252995 = AXIS2_PLACEMENT_3D('',#252996,#252997,#252998); +#252996 = CARTESIAN_POINT('',(168.23235796928,-44.09219932622,1.585)); +#252997 = DIRECTION('',(0.,0.,1.)); +#252998 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#252999 = ORIENTED_EDGE('',*,*,#253000,.T.); +#253000 = EDGE_CURVE('',#252992,#252941,#253001,.T.); +#253001 = LINE('',#253002,#253003); +#253002 = CARTESIAN_POINT('',(168.413078,-44.139737,1.585)); +#253003 = VECTOR('',#253004,1.); +#253004 = DIRECTION('',(0.,1.,0.)); +#253005 = PLANE('',#253006); +#253006 = AXIS2_PLACEMENT_3D('',#253007,#253008,#253009); +#253007 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253008 = DIRECTION('',(0.,0.,1.)); +#253009 = DIRECTION('',(1.,0.,-0.)); +#253010 = SHELL_BASED_SURFACE_MODEL('',(#253011)); +#253011 = OPEN_SHELL('',(#253012)); +#253012 = ADVANCED_FACE('',(#253013),#253298,.T.); +#253013 = FACE_BOUND('',#253014,.F.); +#253014 = EDGE_LOOP('',(#253015,#253025,#253033,#253041,#253050,#253058, + #253066,#253074,#253082,#253090,#253098,#253106,#253114,#253122, + #253130,#253138,#253146,#253154,#253162,#253171,#253179,#253188, + #253196,#253204,#253212,#253220,#253228,#253236,#253244,#253252, + #253260,#253268,#253276,#253284,#253292)); +#253015 = ORIENTED_EDGE('',*,*,#253016,.T.); +#253016 = EDGE_CURVE('',#253017,#253019,#253021,.T.); +#253017 = VERTEX_POINT('',#253018); +#253018 = CARTESIAN_POINT('',(168.883109,-43.661789,1.585)); +#253019 = VERTEX_POINT('',#253020); +#253020 = CARTESIAN_POINT('',(168.997256,-43.607693,1.585)); +#253021 = LINE('',#253022,#253023); +#253022 = CARTESIAN_POINT('',(168.883109,-43.661789,1.585)); +#253023 = VECTOR('',#253024,1.); +#253024 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#253025 = ORIENTED_EDGE('',*,*,#253026,.T.); +#253026 = EDGE_CURVE('',#253019,#253027,#253029,.T.); +#253027 = VERTEX_POINT('',#253028); +#253028 = CARTESIAN_POINT('',(169.169377,-43.607693,1.585)); +#253029 = LINE('',#253030,#253031); +#253030 = CARTESIAN_POINT('',(168.997256,-43.607693,1.585)); +#253031 = VECTOR('',#253032,1.); +#253032 = DIRECTION('',(1.,0.,0.)); +#253033 = ORIENTED_EDGE('',*,*,#253034,.T.); +#253034 = EDGE_CURVE('',#253027,#253035,#253037,.T.); +#253035 = VERTEX_POINT('',#253036); +#253036 = CARTESIAN_POINT('',(169.295967,-43.669621,1.585)); +#253037 = LINE('',#253038,#253039); +#253038 = CARTESIAN_POINT('',(169.169377,-43.607693,1.585)); +#253039 = VECTOR('',#253040,1.); +#253040 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#253041 = ORIENTED_EDGE('',*,*,#253042,.T.); +#253042 = EDGE_CURVE('',#253035,#253043,#253045,.T.); +#253043 = VERTEX_POINT('',#253044); +#253044 = CARTESIAN_POINT('',(169.216442,-43.795953,1.585)); +#253045 = CIRCLE('',#253046,7.50002944036E-02); +#253046 = AXIS2_PLACEMENT_3D('',#253047,#253048,#253049); +#253047 = CARTESIAN_POINT('',(169.24998305397,-43.72887064867,1.585)); +#253048 = DIRECTION('',(0.,0.,-1.)); +#253049 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#253050 = ORIENTED_EDGE('',*,*,#253051,.T.); +#253051 = EDGE_CURVE('',#253043,#253052,#253054,.T.); +#253052 = VERTEX_POINT('',#253053); +#253053 = CARTESIAN_POINT('',(169.13704,-43.756252,1.585)); +#253054 = LINE('',#253055,#253056); +#253055 = CARTESIAN_POINT('',(169.216442,-43.795953,1.585)); +#253056 = VECTOR('',#253057,1.); +#253057 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#253058 = ORIENTED_EDGE('',*,*,#253059,.T.); +#253059 = EDGE_CURVE('',#253052,#253060,#253062,.T.); +#253060 = VERTEX_POINT('',#253061); +#253061 = CARTESIAN_POINT('',(169.029593,-43.756252,1.585)); +#253062 = LINE('',#253063,#253064); +#253063 = CARTESIAN_POINT('',(169.13704,-43.756252,1.585)); +#253064 = VECTOR('',#253065,1.); +#253065 = DIRECTION('',(-1.,0.,0.)); +#253066 = ORIENTED_EDGE('',*,*,#253067,.T.); +#253067 = EDGE_CURVE('',#253060,#253068,#253070,.T.); +#253068 = VERTEX_POINT('',#253069); +#253069 = CARTESIAN_POINT('',(168.972551,-43.784772,1.585)); +#253070 = LINE('',#253071,#253072); +#253071 = CARTESIAN_POINT('',(169.029593,-43.756252,1.585)); +#253072 = VECTOR('',#253073,1.); +#253073 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#253074 = ORIENTED_EDGE('',*,*,#253075,.T.); +#253075 = EDGE_CURVE('',#253068,#253076,#253078,.T.); +#253076 = VERTEX_POINT('',#253077); +#253077 = CARTESIAN_POINT('',(168.944031,-43.841814,1.585)); +#253078 = LINE('',#253079,#253080); +#253079 = CARTESIAN_POINT('',(168.972551,-43.784772,1.585)); +#253080 = VECTOR('',#253081,1.); +#253081 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#253082 = ORIENTED_EDGE('',*,*,#253083,.T.); +#253083 = EDGE_CURVE('',#253076,#253084,#253086,.T.); +#253084 = VERTEX_POINT('',#253085); +#253085 = CARTESIAN_POINT('',(168.944031,-43.854023,1.585)); +#253086 = LINE('',#253087,#253088); +#253087 = CARTESIAN_POINT('',(168.944031,-43.841814,1.585)); +#253088 = VECTOR('',#253089,1.); +#253089 = DIRECTION('',(0.,-1.,0.)); +#253090 = ORIENTED_EDGE('',*,*,#253091,.T.); +#253091 = EDGE_CURVE('',#253084,#253092,#253094,.T.); +#253092 = VERTEX_POINT('',#253093); +#253093 = CARTESIAN_POINT('',(168.972551,-43.911064,1.585)); +#253094 = LINE('',#253095,#253096); +#253095 = CARTESIAN_POINT('',(168.944031,-43.854023,1.585)); +#253096 = VECTOR('',#253097,1.); +#253097 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#253098 = ORIENTED_EDGE('',*,*,#253099,.T.); +#253099 = EDGE_CURVE('',#253092,#253100,#253102,.T.); +#253100 = VERTEX_POINT('',#253101); +#253101 = CARTESIAN_POINT('',(169.029593,-43.939585,1.585)); +#253102 = LINE('',#253103,#253104); +#253103 = CARTESIAN_POINT('',(168.972551,-43.911064,1.585)); +#253104 = VECTOR('',#253105,1.); +#253105 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#253106 = ORIENTED_EDGE('',*,*,#253107,.T.); +#253107 = EDGE_CURVE('',#253100,#253108,#253110,.T.); +#253108 = VERTEX_POINT('',#253109); +#253109 = CARTESIAN_POINT('',(169.174554,-43.942248,1.585)); +#253110 = LINE('',#253111,#253112); +#253111 = CARTESIAN_POINT('',(169.029593,-43.939585,1.585)); +#253112 = VECTOR('',#253113,1.); +#253113 = DIRECTION('',(0.999831305828,-1.836735927193E-02,0.)); +#253114 = ORIENTED_EDGE('',*,*,#253115,.T.); +#253115 = EDGE_CURVE('',#253108,#253116,#253118,.T.); +#253116 = VERTEX_POINT('',#253117); +#253117 = CARTESIAN_POINT('',(169.295967,-44.002954,1.585)); +#253118 = LINE('',#253119,#253120); +#253119 = CARTESIAN_POINT('',(169.174554,-43.942248,1.585)); +#253120 = VECTOR('',#253121,1.); +#253121 = DIRECTION('',(0.894428664361,-0.447210648766,0.)); +#253122 = ORIENTED_EDGE('',*,*,#253123,.T.); +#253123 = EDGE_CURVE('',#253116,#253124,#253126,.T.); +#253124 = VERTEX_POINT('',#253125); +#253125 = CARTESIAN_POINT('',(169.317065,-44.028663,1.585)); +#253126 = LINE('',#253127,#253128); +#253127 = CARTESIAN_POINT('',(169.295967,-44.002954,1.585)); +#253128 = VECTOR('',#253129,1.); +#253129 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#253130 = ORIENTED_EDGE('',*,*,#253131,.T.); +#253131 = EDGE_CURVE('',#253124,#253132,#253134,.T.); +#253132 = VERTEX_POINT('',#253133); +#253133 = CARTESIAN_POINT('',(169.371161,-44.14281,1.585)); +#253134 = LINE('',#253135,#253136); +#253135 = CARTESIAN_POINT('',(169.317065,-44.028663,1.585)); +#253136 = VECTOR('',#253137,1.); +#253137 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#253138 = ORIENTED_EDGE('',*,*,#253139,.T.); +#253139 = EDGE_CURVE('',#253132,#253140,#253142,.T.); +#253140 = VERTEX_POINT('',#253141); +#253141 = CARTESIAN_POINT('',(169.369939,-44.22487,1.585)); +#253142 = LINE('',#253143,#253144); +#253143 = CARTESIAN_POINT('',(169.371161,-44.14281,1.585)); +#253144 = VECTOR('',#253145,1.); +#253145 = DIRECTION('',(-1.488989188859E-02,-0.999889139415,0.)); +#253146 = ORIENTED_EDGE('',*,*,#253147,.T.); +#253147 = EDGE_CURVE('',#253140,#253148,#253150,.T.); +#253148 = VERTEX_POINT('',#253149); +#253149 = CARTESIAN_POINT('',(169.309233,-44.346284,1.585)); +#253150 = LINE('',#253151,#253152); +#253151 = CARTESIAN_POINT('',(169.369939,-44.22487,1.585)); +#253152 = VECTOR('',#253153,1.); +#253153 = DIRECTION('',(-0.447207702067,-0.894430137692,0.)); +#253154 = ORIENTED_EDGE('',*,*,#253155,.T.); +#253155 = EDGE_CURVE('',#253148,#253156,#253158,.T.); +#253156 = VERTEX_POINT('',#253157); +#253157 = CARTESIAN_POINT('',(169.283524,-44.367382,1.585)); +#253158 = LINE('',#253159,#253160); +#253159 = CARTESIAN_POINT('',(169.309233,-44.346284,1.585)); +#253160 = VECTOR('',#253161,1.); +#253161 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#253162 = ORIENTED_EDGE('',*,*,#253163,.T.); +#253163 = EDGE_CURVE('',#253156,#253164,#253166,.T.); +#253164 = VERTEX_POINT('',#253165); +#253165 = CARTESIAN_POINT('',(168.823047,-44.35955,1.585)); +#253166 = CIRCLE('',#253167,0.396588066051); +#253167 = AXIS2_PLACEMENT_3D('',#253168,#253169,#253170); +#253168 = CARTESIAN_POINT('',(169.05877653893,-44.04062418008,1.585)); +#253169 = DIRECTION('',(-0.,0.,-1.)); +#253170 = DIRECTION('',(0.566702531691,-0.82392247243,-0.)); +#253171 = ORIENTED_EDGE('',*,*,#253172,.T.); +#253172 = EDGE_CURVE('',#253164,#253173,#253175,.T.); +#253173 = VERTEX_POINT('',#253174); +#253174 = CARTESIAN_POINT('',(168.803874,-44.337442,1.585)); +#253175 = LINE('',#253176,#253177); +#253176 = CARTESIAN_POINT('',(168.823047,-44.35955,1.585)); +#253177 = VECTOR('',#253178,1.); +#253178 = DIRECTION('',(-0.655178986933,0.755473689205,0.)); +#253179 = ORIENTED_EDGE('',*,*,#253180,.T.); +#253180 = EDGE_CURVE('',#253173,#253181,#253183,.T.); +#253181 = VERTEX_POINT('',#253182); +#253182 = CARTESIAN_POINT('',(168.902572,-44.233218,1.585)); +#253183 = CIRCLE('',#253184,7.499954050662E-02); +#253184 = AXIS2_PLACEMENT_3D('',#253185,#253186,#253187); +#253185 = CARTESIAN_POINT('',(168.86903028896,-44.3002991799,1.585)); +#253186 = DIRECTION('',(0.,0.,-1.)); +#253187 = DIRECTION('',(-0.868755841989,-0.495240635459,-0.)); +#253188 = ORIENTED_EDGE('',*,*,#253189,.T.); +#253189 = EDGE_CURVE('',#253181,#253190,#253192,.T.); +#253190 = VERTEX_POINT('',#253191); +#253191 = CARTESIAN_POINT('',(168.981974,-44.272919,1.585)); +#253192 = LINE('',#253193,#253194); +#253193 = CARTESIAN_POINT('',(168.902572,-44.233218,1.585)); +#253194 = VECTOR('',#253195,1.); +#253195 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#253196 = ORIENTED_EDGE('',*,*,#253197,.T.); +#253197 = EDGE_CURVE('',#253190,#253198,#253200,.T.); +#253198 = VERTEX_POINT('',#253199); +#253199 = CARTESIAN_POINT('',(169.13704,-44.272919,1.585)); +#253200 = LINE('',#253201,#253202); +#253201 = CARTESIAN_POINT('',(168.981974,-44.272919,1.585)); +#253202 = VECTOR('',#253203,1.); +#253203 = DIRECTION('',(1.,0.,0.)); +#253204 = ORIENTED_EDGE('',*,*,#253205,.T.); +#253205 = EDGE_CURVE('',#253198,#253206,#253208,.T.); +#253206 = VERTEX_POINT('',#253207); +#253207 = CARTESIAN_POINT('',(169.194081,-44.244398,1.585)); +#253208 = LINE('',#253209,#253210); +#253209 = CARTESIAN_POINT('',(169.13704,-44.272919,1.585)); +#253210 = VECTOR('',#253211,1.); +#253211 = DIRECTION('',(0.894424054904,0.447219867638,0.)); +#253212 = ORIENTED_EDGE('',*,*,#253213,.T.); +#253213 = EDGE_CURVE('',#253206,#253214,#253216,.T.); +#253214 = VERTEX_POINT('',#253215); +#253215 = CARTESIAN_POINT('',(169.222602,-44.187356,1.585)); +#253216 = LINE('',#253217,#253218); +#253217 = CARTESIAN_POINT('',(169.194081,-44.244398,1.585)); +#253218 = VECTOR('',#253219,1.); +#253219 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#253220 = ORIENTED_EDGE('',*,*,#253221,.T.); +#253221 = EDGE_CURVE('',#253214,#253222,#253224,.T.); +#253222 = VERTEX_POINT('',#253223); +#253223 = CARTESIAN_POINT('',(169.222602,-44.175147,1.585)); +#253224 = LINE('',#253225,#253226); +#253225 = CARTESIAN_POINT('',(169.222602,-44.187356,1.585)); +#253226 = VECTOR('',#253227,1.); +#253227 = DIRECTION('',(0.,1.,0.)); +#253228 = ORIENTED_EDGE('',*,*,#253229,.T.); +#253229 = EDGE_CURVE('',#253222,#253230,#253232,.T.); +#253230 = VERTEX_POINT('',#253231); +#253231 = CARTESIAN_POINT('',(169.194081,-44.118105,1.585)); +#253232 = LINE('',#253233,#253234); +#253233 = CARTESIAN_POINT('',(169.222602,-44.175147,1.585)); +#253234 = VECTOR('',#253235,1.); +#253235 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#253236 = ORIENTED_EDGE('',*,*,#253237,.T.); +#253237 = EDGE_CURVE('',#253230,#253238,#253240,.T.); +#253238 = VERTEX_POINT('',#253239); +#253239 = CARTESIAN_POINT('',(169.13704,-44.089585,1.585)); +#253240 = LINE('',#253241,#253242); +#253241 = CARTESIAN_POINT('',(169.194081,-44.118105,1.585)); +#253242 = VECTOR('',#253243,1.); +#253243 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#253244 = ORIENTED_EDGE('',*,*,#253245,.T.); +#253245 = EDGE_CURVE('',#253238,#253246,#253248,.T.); +#253246 = VERTEX_POINT('',#253247); +#253247 = CARTESIAN_POINT('',(168.992078,-44.086922,1.585)); +#253248 = LINE('',#253249,#253250); +#253249 = CARTESIAN_POINT('',(169.13704,-44.089585,1.585)); +#253250 = VECTOR('',#253251,1.); +#253251 = DIRECTION('',(-0.999831308155,1.836723261002E-02,0.)); +#253252 = ORIENTED_EDGE('',*,*,#253253,.T.); +#253253 = EDGE_CURVE('',#253246,#253254,#253256,.T.); +#253254 = VERTEX_POINT('',#253255); +#253255 = CARTESIAN_POINT('',(168.870666,-44.026216,1.585)); +#253256 = LINE('',#253257,#253258); +#253257 = CARTESIAN_POINT('',(168.992078,-44.086922,1.585)); +#253258 = VECTOR('',#253259,1.); +#253259 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#253260 = ORIENTED_EDGE('',*,*,#253261,.T.); +#253261 = EDGE_CURVE('',#253254,#253262,#253264,.T.); +#253262 = VERTEX_POINT('',#253263); +#253263 = CARTESIAN_POINT('',(168.849568,-44.000507,1.585)); +#253264 = LINE('',#253265,#253266); +#253265 = CARTESIAN_POINT('',(168.870666,-44.026216,1.585)); +#253266 = VECTOR('',#253267,1.); +#253267 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#253268 = ORIENTED_EDGE('',*,*,#253269,.T.); +#253269 = EDGE_CURVE('',#253262,#253270,#253272,.T.); +#253270 = VERTEX_POINT('',#253271); +#253271 = CARTESIAN_POINT('',(168.795472,-43.88636,1.585)); +#253272 = LINE('',#253273,#253274); +#253273 = CARTESIAN_POINT('',(168.849568,-44.000507,1.585)); +#253274 = VECTOR('',#253275,1.); +#253275 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#253276 = ORIENTED_EDGE('',*,*,#253277,.T.); +#253277 = EDGE_CURVE('',#253270,#253278,#253280,.T.); +#253278 = VERTEX_POINT('',#253279); +#253279 = CARTESIAN_POINT('',(168.796694,-43.8043,1.585)); +#253280 = LINE('',#253281,#253282); +#253281 = CARTESIAN_POINT('',(168.795472,-43.88636,1.585)); +#253282 = VECTOR('',#253283,1.); +#253283 = DIRECTION('',(1.488989188859E-02,0.999889139415,0.)); +#253284 = ORIENTED_EDGE('',*,*,#253285,.T.); +#253285 = EDGE_CURVE('',#253278,#253286,#253288,.T.); +#253286 = VERTEX_POINT('',#253287); +#253287 = CARTESIAN_POINT('',(168.8574,-43.682887,1.585)); +#253288 = LINE('',#253289,#253290); +#253289 = CARTESIAN_POINT('',(168.796694,-43.8043,1.585)); +#253290 = VECTOR('',#253291,1.); +#253291 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#253292 = ORIENTED_EDGE('',*,*,#253293,.T.); +#253293 = EDGE_CURVE('',#253286,#253017,#253294,.T.); +#253294 = LINE('',#253295,#253296); +#253295 = CARTESIAN_POINT('',(168.8574,-43.682887,1.585)); +#253296 = VECTOR('',#253297,1.); +#253297 = DIRECTION('',(0.773022706982,0.634378352792,0.)); +#253298 = PLANE('',#253299); +#253299 = AXIS2_PLACEMENT_3D('',#253300,#253301,#253302); +#253300 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253301 = DIRECTION('',(0.,0.,1.)); +#253302 = DIRECTION('',(1.,0.,-0.)); +#253303 = SHELL_BASED_SURFACE_MODEL('',(#253304)); +#253304 = OPEN_SHELL('',(#253305)); +#253305 = ADVANCED_FACE('',(#253306,#253408),#253510,.T.); +#253306 = FACE_BOUND('',#253307,.F.); +#253307 = EDGE_LOOP('',(#253308,#253319,#253327,#253335,#253344,#253352, + #253360,#253369,#253377,#253385,#253394,#253402)); +#253308 = ORIENTED_EDGE('',*,*,#253309,.T.); +#253309 = EDGE_CURVE('',#253310,#253312,#253314,.T.); +#253310 = VERTEX_POINT('',#253311); +#253311 = CARTESIAN_POINT('',(174.660142,-43.33242,1.585)); +#253312 = VERTEX_POINT('',#253313); +#253313 = CARTESIAN_POINT('',(175.03298,-43.337786,1.585)); +#253314 = CIRCLE('',#253315,0.291788488016); +#253315 = AXIS2_PLACEMENT_3D('',#253316,#253317,#253318); +#253316 = CARTESIAN_POINT('',(174.84333086911,-43.55953750256,1.585)); +#253317 = DIRECTION('',(0.,0.,-1.)); +#253318 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#253319 = ORIENTED_EDGE('',*,*,#253320,.T.); +#253320 = EDGE_CURVE('',#253312,#253321,#253323,.T.); +#253321 = VERTEX_POINT('',#253322); +#253322 = CARTESIAN_POINT('',(175.096433,-43.403316,1.585)); +#253323 = LINE('',#253324,#253325); +#253324 = CARTESIAN_POINT('',(175.03298,-43.337786,1.585)); +#253325 = VECTOR('',#253326,1.); +#253326 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#253327 = ORIENTED_EDGE('',*,*,#253328,.T.); +#253328 = EDGE_CURVE('',#253321,#253329,#253331,.T.); +#253329 = VERTEX_POINT('',#253330); +#253330 = CARTESIAN_POINT('',(175.153696,-43.520205,1.585)); +#253331 = LINE('',#253332,#253333); +#253332 = CARTESIAN_POINT('',(175.096433,-43.403316,1.585)); +#253333 = VECTOR('',#253334,1.); +#253334 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#253335 = ORIENTED_EDGE('',*,*,#253336,.T.); +#253336 = EDGE_CURVE('',#253329,#253337,#253339,.T.); +#253337 = VERTEX_POINT('',#253338); +#253338 = CARTESIAN_POINT('',(175.148017,-44.190983,1.585)); +#253339 = CIRCLE('',#253340,0.967158496826); +#253340 = AXIS2_PLACEMENT_3D('',#253341,#253342,#253343); +#253341 = CARTESIAN_POINT('',(174.24374970686,-43.84791417228,1.585)); +#253342 = DIRECTION('',(0.,0.,-1.)); +#253343 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#253344 = ORIENTED_EDGE('',*,*,#253345,.T.); +#253345 = EDGE_CURVE('',#253337,#253346,#253348,.T.); +#253346 = VERTEX_POINT('',#253347); +#253347 = CARTESIAN_POINT('',(175.091067,-44.299963,1.585)); +#253348 = LINE('',#253349,#253350); +#253349 = CARTESIAN_POINT('',(175.148017,-44.190983,1.585)); +#253350 = VECTOR('',#253351,1.); +#253351 = DIRECTION('',(-0.463146784148,-0.886281589752,0.)); +#253352 = ORIENTED_EDGE('',*,*,#253353,.T.); +#253353 = EDGE_CURVE('',#253346,#253354,#253356,.T.); +#253354 = VERTEX_POINT('',#253355); +#253355 = CARTESIAN_POINT('',(175.025537,-44.363417,1.585)); +#253356 = LINE('',#253357,#253358); +#253357 = CARTESIAN_POINT('',(175.091067,-44.299963,1.585)); +#253358 = VECTOR('',#253359,1.); +#253359 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#253360 = ORIENTED_EDGE('',*,*,#253361,.T.); +#253361 = EDGE_CURVE('',#253354,#253362,#253364,.T.); +#253362 = VERTEX_POINT('',#253363); +#253363 = CARTESIAN_POINT('',(174.652698,-44.35805,1.585)); +#253364 = CIRCLE('',#253365,0.290998264264); +#253365 = AXIS2_PLACEMENT_3D('',#253366,#253367,#253368); +#253366 = CARTESIAN_POINT('',(174.84233341815,-44.13732755441,1.585)); +#253367 = DIRECTION('',(-0.,0.,-1.)); +#253368 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#253369 = ORIENTED_EDGE('',*,*,#253370,.T.); +#253370 = EDGE_CURVE('',#253362,#253371,#253373,.T.); +#253371 = VERTEX_POINT('',#253372); +#253372 = CARTESIAN_POINT('',(174.589245,-44.292517,1.585)); +#253373 = LINE('',#253374,#253375); +#253374 = CARTESIAN_POINT('',(174.652698,-44.35805,1.585)); +#253375 = VECTOR('',#253376,1.); +#253376 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#253377 = ORIENTED_EDGE('',*,*,#253378,.T.); +#253378 = EDGE_CURVE('',#253371,#253379,#253381,.T.); +#253379 = VERTEX_POINT('',#253380); +#253380 = CARTESIAN_POINT('',(174.531984,-44.175632,1.585)); +#253381 = LINE('',#253382,#253383); +#253382 = CARTESIAN_POINT('',(174.589245,-44.292517,1.585)); +#253383 = VECTOR('',#253384,1.); +#253384 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#253385 = ORIENTED_EDGE('',*,*,#253386,.T.); +#253386 = EDGE_CURVE('',#253379,#253387,#253389,.T.); +#253387 = VERTEX_POINT('',#253388); +#253388 = CARTESIAN_POINT('',(174.537663,-43.504854,1.585)); +#253389 = CIRCLE('',#253390,0.967158496826); +#253390 = AXIS2_PLACEMENT_3D('',#253391,#253392,#253393); +#253391 = CARTESIAN_POINT('',(175.44193029313,-43.84792282772,1.585)); +#253392 = DIRECTION('',(0.,0.,-1.)); +#253393 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#253394 = ORIENTED_EDGE('',*,*,#253395,.T.); +#253395 = EDGE_CURVE('',#253387,#253396,#253398,.T.); +#253396 = VERTEX_POINT('',#253397); +#253397 = CARTESIAN_POINT('',(174.594612,-43.395873,1.585)); +#253398 = LINE('',#253399,#253400); +#253399 = CARTESIAN_POINT('',(174.537663,-43.504854,1.585)); +#253400 = VECTOR('',#253401,1.); +#253401 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#253402 = ORIENTED_EDGE('',*,*,#253403,.T.); +#253403 = EDGE_CURVE('',#253396,#253310,#253404,.T.); +#253404 = LINE('',#253405,#253406); +#253405 = CARTESIAN_POINT('',(174.594612,-43.395873,1.585)); +#253406 = VECTOR('',#253407,1.); +#253407 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#253408 = FACE_BOUND('',#253409,.F.); +#253409 = EDGE_LOOP('',(#253410,#253421,#253429,#253437,#253446,#253454, + #253462,#253471,#253479,#253487,#253496,#253504)); +#253410 = ORIENTED_EDGE('',*,*,#253411,.T.); +#253411 = EDGE_CURVE('',#253412,#253414,#253416,.T.); +#253412 = VERTEX_POINT('',#253413); +#253413 = CARTESIAN_POINT('',(174.94127,-43.457177,1.585)); +#253414 = VERTEX_POINT('',#253415); +#253415 = CARTESIAN_POINT('',(174.74441,-43.457177,1.585)); +#253416 = CIRCLE('',#253417,0.148516804184); +#253417 = AXIS2_PLACEMENT_3D('',#253418,#253419,#253420); +#253418 = CARTESIAN_POINT('',(174.84284,-43.568392,1.585)); +#253419 = DIRECTION('',(0.,0.,1.)); +#253420 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#253421 = ORIENTED_EDGE('',*,*,#253422,.T.); +#253422 = EDGE_CURVE('',#253414,#253423,#253425,.T.); +#253423 = VERTEX_POINT('',#253424); +#253424 = CARTESIAN_POINT('',(174.714003,-43.487584,1.585)); +#253425 = LINE('',#253426,#253427); +#253426 = CARTESIAN_POINT('',(174.74441,-43.457177,1.585)); +#253427 = VECTOR('',#253428,1.); +#253428 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#253429 = ORIENTED_EDGE('',*,*,#253430,.T.); +#253430 = EDGE_CURVE('',#253423,#253431,#253433,.T.); +#253431 = VERTEX_POINT('',#253432); +#253432 = CARTESIAN_POINT('',(174.675509,-43.564571,1.585)); +#253433 = LINE('',#253434,#253435); +#253434 = CARTESIAN_POINT('',(174.714003,-43.487584,1.585)); +#253435 = VECTOR('',#253436,1.); +#253436 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#253437 = ORIENTED_EDGE('',*,*,#253438,.T.); +#253438 = EDGE_CURVE('',#253431,#253439,#253441,.T.); +#253439 = VERTEX_POINT('',#253440); +#253440 = CARTESIAN_POINT('',(174.675509,-44.131266,1.585)); +#253441 = CIRCLE('',#253442,0.815450468383); +#253442 = AXIS2_PLACEMENT_3D('',#253443,#253444,#253445); +#253443 = CARTESIAN_POINT('',(175.44014856255,-43.8479185,1.585)); +#253444 = DIRECTION('',(0.,0.,1.)); +#253445 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#253446 = ORIENTED_EDGE('',*,*,#253447,.T.); +#253447 = EDGE_CURVE('',#253439,#253448,#253450,.T.); +#253448 = VERTEX_POINT('',#253449); +#253449 = CARTESIAN_POINT('',(174.714003,-44.208253,1.585)); +#253450 = LINE('',#253451,#253452); +#253451 = CARTESIAN_POINT('',(174.675509,-44.131266,1.585)); +#253452 = VECTOR('',#253453,1.); +#253453 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#253454 = ORIENTED_EDGE('',*,*,#253455,.T.); +#253455 = EDGE_CURVE('',#253448,#253456,#253458,.T.); +#253456 = VERTEX_POINT('',#253457); +#253457 = CARTESIAN_POINT('',(174.74441,-44.238661,1.585)); +#253458 = LINE('',#253459,#253460); +#253459 = CARTESIAN_POINT('',(174.714003,-44.208253,1.585)); +#253460 = VECTOR('',#253461,1.); +#253461 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#253462 = ORIENTED_EDGE('',*,*,#253463,.T.); +#253463 = EDGE_CURVE('',#253456,#253464,#253466,.T.); +#253464 = VERTEX_POINT('',#253465); +#253465 = CARTESIAN_POINT('',(174.941269,-44.238661,1.585)); +#253466 = CIRCLE('',#253467,0.14851572397); +#253467 = AXIS2_PLACEMENT_3D('',#253468,#253469,#253470); +#253468 = CARTESIAN_POINT('',(174.8428395,-44.127447,1.585)); +#253469 = DIRECTION('',(0.,0.,1.)); +#253470 = DIRECTION('',(-0.662754739828,-0.748836534121,0.)); +#253471 = ORIENTED_EDGE('',*,*,#253472,.T.); +#253472 = EDGE_CURVE('',#253464,#253473,#253475,.T.); +#253473 = VERTEX_POINT('',#253474); +#253474 = CARTESIAN_POINT('',(174.971676,-44.208253,1.585)); +#253475 = LINE('',#253476,#253477); +#253476 = CARTESIAN_POINT('',(174.941269,-44.238661,1.585)); +#253477 = VECTOR('',#253478,1.); +#253478 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#253479 = ORIENTED_EDGE('',*,*,#253480,.T.); +#253480 = EDGE_CURVE('',#253473,#253481,#253483,.T.); +#253481 = VERTEX_POINT('',#253482); +#253482 = CARTESIAN_POINT('',(175.01017,-44.131266,1.585)); +#253483 = LINE('',#253484,#253485); +#253484 = CARTESIAN_POINT('',(174.971676,-44.208253,1.585)); +#253485 = VECTOR('',#253486,1.); +#253486 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#253487 = ORIENTED_EDGE('',*,*,#253488,.T.); +#253488 = EDGE_CURVE('',#253481,#253489,#253491,.T.); +#253489 = VERTEX_POINT('',#253490); +#253490 = CARTESIAN_POINT('',(175.01017,-43.564571,1.585)); +#253491 = CIRCLE('',#253492,0.815433004022); +#253492 = AXIS2_PLACEMENT_3D('',#253493,#253494,#253495); +#253493 = CARTESIAN_POINT('',(174.24554906235,-43.8479185,1.585)); +#253494 = DIRECTION('',(0.,-0.,1.)); +#253495 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#253496 = ORIENTED_EDGE('',*,*,#253497,.T.); +#253497 = EDGE_CURVE('',#253489,#253498,#253500,.T.); +#253498 = VERTEX_POINT('',#253499); +#253499 = CARTESIAN_POINT('',(174.971677,-43.487584,1.585)); +#253500 = LINE('',#253501,#253502); +#253501 = CARTESIAN_POINT('',(175.01017,-43.564571,1.585)); +#253502 = VECTOR('',#253503,1.); +#253503 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#253504 = ORIENTED_EDGE('',*,*,#253505,.T.); +#253505 = EDGE_CURVE('',#253498,#253412,#253506,.T.); +#253506 = LINE('',#253507,#253508); +#253507 = CARTESIAN_POINT('',(174.971677,-43.487584,1.585)); +#253508 = VECTOR('',#253509,1.); +#253509 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#253510 = PLANE('',#253511); +#253511 = AXIS2_PLACEMENT_3D('',#253512,#253513,#253514); +#253512 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253513 = DIRECTION('',(0.,0.,1.)); +#253514 = DIRECTION('',(1.,0.,-0.)); +#253515 = SHELL_BASED_SURFACE_MODEL('',(#253516)); +#253516 = OPEN_SHELL('',(#253517)); +#253517 = ADVANCED_FACE('',(#253518),#253652,.T.); +#253518 = FACE_BOUND('',#253519,.F.); +#253519 = EDGE_LOOP('',(#253520,#253530,#253538,#253547,#253555,#253563, + #253572,#253580,#253589,#253597,#253605,#253613,#253621,#253630, + #253638,#253646)); +#253520 = ORIENTED_EDGE('',*,*,#253521,.T.); +#253521 = EDGE_CURVE('',#253522,#253524,#253526,.T.); +#253522 = VERTEX_POINT('',#253523); +#253523 = CARTESIAN_POINT('',(147.567133,-43.074941,1.585)); +#253524 = VERTEX_POINT('',#253525); +#253525 = CARTESIAN_POINT('',(147.605589,-43.05436,1.585)); +#253526 = LINE('',#253527,#253528); +#253527 = CARTESIAN_POINT('',(147.567133,-43.074941,1.585)); +#253528 = VECTOR('',#253529,1.); +#253529 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#253530 = ORIENTED_EDGE('',*,*,#253531,.T.); +#253531 = EDGE_CURVE('',#253524,#253532,#253534,.T.); +#253532 = VERTEX_POINT('',#253533); +#253533 = CARTESIAN_POINT('',(147.627426,-43.05436,1.585)); +#253534 = LINE('',#253535,#253536); +#253535 = CARTESIAN_POINT('',(147.605589,-43.05436,1.585)); +#253536 = VECTOR('',#253537,1.); +#253537 = DIRECTION('',(1.,0.,0.)); +#253538 = ORIENTED_EDGE('',*,*,#253539,.T.); +#253539 = EDGE_CURVE('',#253532,#253540,#253542,.T.); +#253540 = VERTEX_POINT('',#253541); +#253541 = CARTESIAN_POINT('',(147.695221,-43.127919,1.585)); +#253542 = CIRCLE('',#253543,7.21689809423E-02); +#253543 = AXIS2_PLACEMENT_3D('',#253544,#253545,#253546); +#253544 = CARTESIAN_POINT('',(147.62306806389,-43.12639728342,1.585)); +#253545 = DIRECTION('',(0.,0.,-1.)); +#253546 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#253547 = ORIENTED_EDGE('',*,*,#253548,.T.); +#253548 = EDGE_CURVE('',#253540,#253549,#253551,.T.); +#253549 = VERTEX_POINT('',#253550); +#253550 = CARTESIAN_POINT('',(147.695221,-44.052919,1.585)); +#253551 = LINE('',#253552,#253553); +#253552 = CARTESIAN_POINT('',(147.695221,-43.127919,1.585)); +#253553 = VECTOR('',#253554,1.); +#253554 = DIRECTION('',(0.,-1.,0.)); +#253555 = ORIENTED_EDGE('',*,*,#253556,.T.); +#253556 = EDGE_CURVE('',#253549,#253557,#253559,.T.); +#253557 = VERTEX_POINT('',#253558); +#253558 = CARTESIAN_POINT('',(147.920567,-44.05436,1.585)); +#253559 = LINE('',#253560,#253561); +#253560 = CARTESIAN_POINT('',(147.695221,-44.052919,1.585)); +#253561 = VECTOR('',#253562,1.); +#253562 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#253563 = ORIENTED_EDGE('',*,*,#253564,.T.); +#253564 = EDGE_CURVE('',#253557,#253565,#253567,.T.); +#253565 = VERTEX_POINT('',#253566); +#253566 = CARTESIAN_POINT('',(147.905935,-44.202919,1.585)); +#253567 = CIRCLE('',#253568,7.500006711464E-02); +#253568 = AXIS2_PLACEMENT_3D('',#253569,#253570,#253571); +#253569 = CARTESIAN_POINT('',(147.90593506711,-44.12791893288,1.585)); +#253570 = DIRECTION('',(0.,0.,-1.)); +#253571 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#253572 = ORIENTED_EDGE('',*,*,#253573,.T.); +#253573 = EDGE_CURVE('',#253565,#253574,#253576,.T.); +#253574 = VERTEX_POINT('',#253575); +#253575 = CARTESIAN_POINT('',(147.319875,-44.201478,1.585)); +#253576 = LINE('',#253577,#253578); +#253577 = CARTESIAN_POINT('',(147.905935,-44.202919,1.585)); +#253578 = VECTOR('',#253579,1.); +#253579 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#253580 = ORIENTED_EDGE('',*,*,#253581,.T.); +#253581 = EDGE_CURVE('',#253574,#253582,#253584,.T.); +#253582 = VERTEX_POINT('',#253583); +#253583 = CARTESIAN_POINT('',(147.334507,-44.052919,1.585)); +#253584 = CIRCLE('',#253585,7.500006711464E-02); +#253585 = AXIS2_PLACEMENT_3D('',#253586,#253587,#253588); +#253586 = CARTESIAN_POINT('',(147.33450693288,-44.12791906711,1.585)); +#253587 = DIRECTION('',(0.,0.,-1.)); +#253588 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#253589 = ORIENTED_EDGE('',*,*,#253590,.T.); +#253590 = EDGE_CURVE('',#253582,#253591,#253593,.T.); +#253591 = VERTEX_POINT('',#253592); +#253592 = CARTESIAN_POINT('',(147.545221,-44.052919,1.585)); +#253593 = LINE('',#253594,#253595); +#253594 = CARTESIAN_POINT('',(147.334507,-44.052919,1.585)); +#253595 = VECTOR('',#253596,1.); +#253596 = DIRECTION('',(1.,0.,0.)); +#253597 = ORIENTED_EDGE('',*,*,#253598,.T.); +#253598 = EDGE_CURVE('',#253591,#253599,#253601,.T.); +#253599 = VERTEX_POINT('',#253600); +#253600 = CARTESIAN_POINT('',(147.545221,-43.356604,1.585)); +#253601 = LINE('',#253602,#253603); +#253602 = CARTESIAN_POINT('',(147.545221,-44.052919,1.585)); +#253603 = VECTOR('',#253604,1.); +#253604 = DIRECTION('',(0.,1.,0.)); +#253605 = ORIENTED_EDGE('',*,*,#253606,.T.); +#253606 = EDGE_CURVE('',#253599,#253607,#253609,.T.); +#253607 = VERTEX_POINT('',#253608); +#253608 = CARTESIAN_POINT('',(147.469585,-43.429131,1.585)); +#253609 = LINE('',#253610,#253611); +#253610 = CARTESIAN_POINT('',(147.545221,-43.356604,1.585)); +#253611 = VECTOR('',#253612,1.); +#253612 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#253613 = ORIENTED_EDGE('',*,*,#253614,.T.); +#253614 = EDGE_CURVE('',#253607,#253615,#253617,.T.); +#253615 = VERTEX_POINT('',#253616); +#253616 = CARTESIAN_POINT('',(147.354316,-43.48597,1.585)); +#253617 = LINE('',#253618,#253619); +#253618 = CARTESIAN_POINT('',(147.469585,-43.429131,1.585)); +#253619 = VECTOR('',#253620,1.); +#253620 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#253621 = ORIENTED_EDGE('',*,*,#253622,.T.); +#253622 = EDGE_CURVE('',#253615,#253623,#253625,.T.); +#253623 = VERTEX_POINT('',#253624); +#253624 = CARTESIAN_POINT('',(147.300966,-43.346551,1.585)); +#253625 = CIRCLE('',#253626,7.500005272363E-02); +#253626 = AXIS2_PLACEMENT_3D('',#253627,#253628,#253629); +#253627 = CARTESIAN_POINT('',(147.33450655676,-43.41363332972,1.585)); +#253628 = DIRECTION('',(0.,0.,-1.)); +#253629 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#253630 = ORIENTED_EDGE('',*,*,#253631,.T.); +#253631 = EDGE_CURVE('',#253623,#253632,#253634,.T.); +#253632 = VERTEX_POINT('',#253633); +#253633 = CARTESIAN_POINT('',(147.385318,-43.304375,1.585)); +#253634 = LINE('',#253635,#253636); +#253635 = CARTESIAN_POINT('',(147.300966,-43.346551,1.585)); +#253636 = VECTOR('',#253637,1.); +#253637 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#253638 = ORIENTED_EDGE('',*,*,#253639,.T.); +#253639 = EDGE_CURVE('',#253632,#253640,#253642,.T.); +#253640 = VERTEX_POINT('',#253641); +#253641 = CARTESIAN_POINT('',(147.466697,-43.222996,1.585)); +#253642 = LINE('',#253643,#253644); +#253643 = CARTESIAN_POINT('',(147.385318,-43.304375,1.585)); +#253644 = VECTOR('',#253645,1.); +#253645 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#253646 = ORIENTED_EDGE('',*,*,#253647,.T.); +#253647 = EDGE_CURVE('',#253640,#253522,#253648,.T.); +#253648 = LINE('',#253649,#253650); +#253649 = CARTESIAN_POINT('',(147.466697,-43.222996,1.585)); +#253650 = VECTOR('',#253651,1.); +#253651 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#253652 = PLANE('',#253653); +#253653 = AXIS2_PLACEMENT_3D('',#253654,#253655,#253656); +#253654 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253655 = DIRECTION('',(0.,0.,1.)); +#253656 = DIRECTION('',(1.,0.,-0.)); +#253657 = SHELL_BASED_SURFACE_MODEL('',(#253658)); +#253658 = OPEN_SHELL('',(#253659)); +#253659 = ADVANCED_FACE('',(#253660),#253754,.T.); +#253660 = FACE_BOUND('',#253661,.F.); +#253661 = EDGE_LOOP('',(#253662,#253673,#253681,#253690,#253698,#253706, + #253714,#253723,#253731,#253739,#253748)); +#253662 = ORIENTED_EDGE('',*,*,#253663,.T.); +#253663 = EDGE_CURVE('',#253664,#253666,#253668,.T.); +#253664 = VERTEX_POINT('',#253665); +#253665 = CARTESIAN_POINT('',(146.451424,-43.113287,1.585)); +#253666 = VERTEX_POINT('',#253667); +#253667 = CARTESIAN_POINT('',(146.524983,-43.052919,1.585)); +#253668 = CIRCLE('',#253669,7.500074938988E-02); +#253669 = AXIS2_PLACEMENT_3D('',#253670,#253671,#253672); +#253670 = CARTESIAN_POINT('',(146.52498346611,-43.12791974938,1.585)); +#253671 = DIRECTION('',(0.,0.,-1.)); +#253672 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#253673 = ORIENTED_EDGE('',*,*,#253674,.T.); +#253674 = EDGE_CURVE('',#253666,#253675,#253677,.T.); +#253675 = VERTEX_POINT('',#253676); +#253676 = CARTESIAN_POINT('',(147.015805,-43.05436,1.585)); +#253677 = LINE('',#253678,#253679); +#253678 = CARTESIAN_POINT('',(146.524983,-43.052919,1.585)); +#253679 = VECTOR('',#253680,1.); +#253680 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#253681 = ORIENTED_EDGE('',*,*,#253682,.T.); +#253682 = EDGE_CURVE('',#253675,#253683,#253685,.T.); +#253683 = VERTEX_POINT('',#253684); +#253684 = CARTESIAN_POINT('',(147.001173,-43.202919,1.585)); +#253685 = CIRCLE('',#253686,7.500006711463E-02); +#253686 = AXIS2_PLACEMENT_3D('',#253687,#253688,#253689); +#253687 = CARTESIAN_POINT('',(147.00117306711,-43.12791893288,1.585)); +#253688 = DIRECTION('',(0.,0.,-1.)); +#253689 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#253690 = ORIENTED_EDGE('',*,*,#253691,.T.); +#253691 = EDGE_CURVE('',#253683,#253692,#253694,.T.); +#253692 = VERTEX_POINT('',#253693); +#253693 = CARTESIAN_POINT('',(146.599983,-43.202919,1.585)); +#253694 = LINE('',#253695,#253696); +#253695 = CARTESIAN_POINT('',(147.001173,-43.202919,1.585)); +#253696 = VECTOR('',#253697,1.); +#253697 = DIRECTION('',(-1.,0.,0.)); +#253698 = ORIENTED_EDGE('',*,*,#253699,.T.); +#253699 = EDGE_CURVE('',#253692,#253700,#253702,.T.); +#253700 = VERTEX_POINT('',#253701); +#253701 = CARTESIAN_POINT('',(146.599983,-43.529109,1.585)); +#253702 = LINE('',#253703,#253704); +#253703 = CARTESIAN_POINT('',(146.599983,-43.202919,1.585)); +#253704 = VECTOR('',#253705,1.); +#253705 = DIRECTION('',(0.,-1.,0.)); +#253706 = ORIENTED_EDGE('',*,*,#253707,.T.); +#253707 = EDGE_CURVE('',#253700,#253708,#253710,.T.); +#253708 = VERTEX_POINT('',#253709); +#253709 = CARTESIAN_POINT('',(146.872948,-43.53055,1.585)); +#253710 = LINE('',#253711,#253712); +#253711 = CARTESIAN_POINT('',(146.599983,-43.529109,1.585)); +#253712 = VECTOR('',#253713,1.); +#253713 = DIRECTION('',(0.999986066027,-5.278991523254E-03,0.)); +#253714 = ORIENTED_EDGE('',*,*,#253715,.T.); +#253715 = EDGE_CURVE('',#253708,#253716,#253718,.T.); +#253716 = VERTEX_POINT('',#253717); +#253717 = CARTESIAN_POINT('',(146.858316,-43.679109,1.585)); +#253718 = CIRCLE('',#253719,7.500006711464E-02); +#253719 = AXIS2_PLACEMENT_3D('',#253720,#253721,#253722); +#253720 = CARTESIAN_POINT('',(146.85831606711,-43.60410893288,1.585)); +#253721 = DIRECTION('',(0.,0.,-1.)); +#253722 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#253723 = ORIENTED_EDGE('',*,*,#253724,.T.); +#253724 = EDGE_CURVE('',#253716,#253725,#253727,.T.); +#253725 = VERTEX_POINT('',#253726); +#253726 = CARTESIAN_POINT('',(146.599983,-43.679109,1.585)); +#253727 = LINE('',#253728,#253729); +#253728 = CARTESIAN_POINT('',(146.858316,-43.679109,1.585)); +#253729 = VECTOR('',#253730,1.); +#253730 = DIRECTION('',(-1.,0.,0.)); +#253731 = ORIENTED_EDGE('',*,*,#253732,.T.); +#253732 = EDGE_CURVE('',#253725,#253733,#253735,.T.); +#253733 = VERTEX_POINT('',#253734); +#253734 = CARTESIAN_POINT('',(146.598542,-44.142551,1.585)); +#253735 = LINE('',#253736,#253737); +#253736 = CARTESIAN_POINT('',(146.599983,-43.679109,1.585)); +#253737 = VECTOR('',#253738,1.); +#253738 = DIRECTION('',(-3.109327670448E-03,-0.999995166029,0.)); +#253739 = ORIENTED_EDGE('',*,*,#253740,.T.); +#253740 = EDGE_CURVE('',#253733,#253741,#253743,.T.); +#253741 = VERTEX_POINT('',#253742); +#253742 = CARTESIAN_POINT('',(146.449983,-44.127919,1.585)); +#253743 = CIRCLE('',#253744,7.500006711464E-02); +#253744 = AXIS2_PLACEMENT_3D('',#253745,#253746,#253747); +#253745 = CARTESIAN_POINT('',(146.52498306711,-44.12791906711,1.585)); +#253746 = DIRECTION('',(-0.,0.,-1.)); +#253747 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#253748 = ORIENTED_EDGE('',*,*,#253749,.T.); +#253749 = EDGE_CURVE('',#253741,#253664,#253750,.T.); +#253750 = LINE('',#253751,#253752); +#253751 = CARTESIAN_POINT('',(146.449983,-44.127919,1.585)); +#253752 = VECTOR('',#253753,1.); +#253753 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#253754 = PLANE('',#253755); +#253755 = AXIS2_PLACEMENT_3D('',#253756,#253757,#253758); +#253756 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253757 = DIRECTION('',(0.,0.,1.)); +#253758 = DIRECTION('',(1.,0.,-0.)); +#253759 = SHELL_BASED_SURFACE_MODEL('',(#253760)); +#253760 = OPEN_SHELL('',(#253761)); +#253761 = ADVANCED_FACE('',(#253762),#253956,.T.); +#253762 = FACE_BOUND('',#253763,.F.); +#253763 = EDGE_LOOP('',(#253764,#253775,#253783,#253792,#253800,#253809, + #253817,#253825,#253833,#253842,#253850,#253859,#253867,#253876, + #253884,#253892,#253900,#253909,#253917,#253925,#253934,#253942, + #253950)); +#253764 = ORIENTED_EDGE('',*,*,#253765,.T.); +#253765 = EDGE_CURVE('',#253766,#253768,#253770,.T.); +#253766 = VERTEX_POINT('',#253767); +#253767 = CARTESIAN_POINT('',(156.513151,-43.101925,1.585)); +#253768 = VERTEX_POINT('',#253769); +#253769 = CARTESIAN_POINT('',(156.604207,-43.107842,1.585)); +#253770 = CIRCLE('',#253771,7.499904172406E-02); +#253771 = AXIS2_PLACEMENT_3D('',#253772,#253773,#253774); +#253772 = CARTESIAN_POINT('',(156.55481904495,-43.16428388299,1.585)); +#253773 = DIRECTION('',(0.,0.,-1.)); +#253774 = DIRECTION('',(-0.555581031454,0.831462396918,0.)); +#253775 = ORIENTED_EDGE('',*,*,#253776,.T.); +#253776 = EDGE_CURVE('',#253768,#253777,#253779,.T.); +#253777 = VERTEX_POINT('',#253778); +#253778 = CARTESIAN_POINT('',(156.863516,-43.334737,1.585)); +#253779 = LINE('',#253780,#253781); +#253780 = CARTESIAN_POINT('',(156.604207,-43.107842,1.585)); +#253781 = VECTOR('',#253782,1.); +#253782 = DIRECTION('',(0.752577234061,-0.658503991463,0.)); +#253783 = ORIENTED_EDGE('',*,*,#253784,.T.); +#253784 = EDGE_CURVE('',#253777,#253785,#253787,.T.); +#253785 = VERTEX_POINT('',#253786); +#253786 = CARTESIAN_POINT('',(157.111615,-43.090726,1.585)); +#253787 = CIRCLE('',#253788,0.348517853143); +#253788 = AXIS2_PLACEMENT_3D('',#253789,#253790,#253791); +#253789 = CARTESIAN_POINT('',(157.19931548686,-43.42802900704,1.585)); +#253790 = DIRECTION('',(0.,0.,-1.)); +#253791 = DIRECTION('',(-0.963507274705,0.267682146568,0.)); +#253792 = ORIENTED_EDGE('',*,*,#253793,.T.); +#253793 = EDGE_CURVE('',#253785,#253794,#253796,.T.); +#253794 = VERTEX_POINT('',#253795); +#253795 = CARTESIAN_POINT('',(157.378974,-43.090726,1.585)); +#253796 = LINE('',#253797,#253798); +#253797 = CARTESIAN_POINT('',(157.111615,-43.090726,1.585)); +#253798 = VECTOR('',#253799,1.); +#253799 = DIRECTION('',(1.,0.,0.)); +#253800 = ORIENTED_EDGE('',*,*,#253801,.T.); +#253801 = EDGE_CURVE('',#253794,#253802,#253804,.T.); +#253802 = VERTEX_POINT('',#253803); +#253803 = CARTESIAN_POINT('',(157.628378,-43.340129,1.585)); +#253804 = CIRCLE('',#253805,0.347873191155); +#253805 = AXIS2_PLACEMENT_3D('',#253806,#253807,#253808); +#253806 = CARTESIAN_POINT('',(157.29164493659,-43.42745941356,1.585)); +#253807 = DIRECTION('',(0.,0.,-1.)); +#253808 = DIRECTION('',(0.251037060709,0.967977476055,0.)); +#253809 = ORIENTED_EDGE('',*,*,#253810,.T.); +#253810 = EDGE_CURVE('',#253802,#253811,#253813,.T.); +#253811 = VERTEX_POINT('',#253812); +#253812 = CARTESIAN_POINT('',(157.627156,-43.660285,1.585)); +#253813 = LINE('',#253814,#253815); +#253814 = CARTESIAN_POINT('',(157.628378,-43.340129,1.585)); +#253815 = VECTOR('',#253816,1.); +#253816 = DIRECTION('',(-3.816861463287E-03,-0.999992715758,0.)); +#253817 = ORIENTED_EDGE('',*,*,#253818,.T.); +#253818 = EDGE_CURVE('',#253811,#253819,#253821,.T.); +#253819 = VERTEX_POINT('',#253820); +#253820 = CARTESIAN_POINT('',(157.56495,-43.782997,1.585)); +#253821 = LINE('',#253822,#253823); +#253822 = CARTESIAN_POINT('',(157.627156,-43.660285,1.585)); +#253823 = VECTOR('',#253824,1.); +#253824 = DIRECTION('',(-0.452149402815,-0.891942216477,0.)); +#253825 = ORIENTED_EDGE('',*,*,#253826,.T.); +#253826 = EDGE_CURVE('',#253819,#253827,#253829,.T.); +#253827 = VERTEX_POINT('',#253828); +#253828 = CARTESIAN_POINT('',(157.501247,-43.845693,1.585)); +#253829 = LINE('',#253830,#253831); +#253830 = CARTESIAN_POINT('',(157.56495,-43.782997,1.585)); +#253831 = VECTOR('',#253832,1.); +#253832 = DIRECTION('',(-0.712717566469,-0.701451117645,0.)); +#253833 = ORIENTED_EDGE('',*,*,#253834,.T.); +#253834 = EDGE_CURVE('',#253827,#253835,#253837,.T.); +#253835 = VERTEX_POINT('',#253836); +#253836 = CARTESIAN_POINT('',(157.406548,-43.730298,1.585)); +#253837 = CIRCLE('',#253838,7.500012668041E-02); +#253838 = AXIS2_PLACEMENT_3D('',#253839,#253840,#253841); +#253839 = CARTESIAN_POINT('',(157.45958024831,-43.783331948,1.585)); +#253840 = DIRECTION('',(0.,0.,-1.)); +#253841 = DIRECTION('',(0.555555750804,-0.831479288827,0.)); +#253842 = ORIENTED_EDGE('',*,*,#253843,.T.); +#253843 = EDGE_CURVE('',#253835,#253844,#253846,.T.); +#253844 = VERTEX_POINT('',#253845); +#253845 = CARTESIAN_POINT('',(157.445561,-43.691285,1.585)); +#253846 = LINE('',#253847,#253848); +#253847 = CARTESIAN_POINT('',(157.406548,-43.730298,1.585)); +#253848 = VECTOR('',#253849,1.); +#253849 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#253850 = ORIENTED_EDGE('',*,*,#253851,.T.); +#253851 = EDGE_CURVE('',#253844,#253852,#253854,.T.); +#253852 = VERTEX_POINT('',#253853); +#253853 = CARTESIAN_POINT('',(157.445561,-43.30395,1.585)); +#253854 = CIRCLE('',#253855,0.358499305982); +#253855 = AXIS2_PLACEMENT_3D('',#253856,#253857,#253858); +#253856 = CARTESIAN_POINT('',(157.14387465322,-43.4976175,1.585)); +#253857 = DIRECTION('',(0.,-0.,1.)); +#253858 = DIRECTION('',(0.841525608965,-0.540217224324,-0.)); +#253859 = ORIENTED_EDGE('',*,*,#253860,.T.); +#253860 = EDGE_CURVE('',#253852,#253861,#253863,.T.); +#253861 = VERTEX_POINT('',#253862); +#253862 = CARTESIAN_POINT('',(157.415153,-43.273543,1.585)); +#253863 = LINE('',#253864,#253865); +#253864 = CARTESIAN_POINT('',(157.445561,-43.30395,1.585)); +#253865 = VECTOR('',#253866,1.); +#253866 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#253867 = ORIENTED_EDGE('',*,*,#253868,.T.); +#253868 = EDGE_CURVE('',#253861,#253869,#253871,.T.); +#253869 = VERTEX_POINT('',#253870); +#253870 = CARTESIAN_POINT('',(157.075436,-43.273543,1.585)); +#253871 = CIRCLE('',#253872,0.305621483548); +#253872 = AXIS2_PLACEMENT_3D('',#253873,#253874,#253875); +#253873 = CARTESIAN_POINT('',(157.2452945,-43.527615,1.585)); +#253874 = DIRECTION('',(0.,0.,1.)); +#253875 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#253876 = ORIENTED_EDGE('',*,*,#253877,.T.); +#253877 = EDGE_CURVE('',#253869,#253878,#253880,.T.); +#253878 = VERTEX_POINT('',#253879); +#253879 = CARTESIAN_POINT('',(157.045029,-43.30395,1.585)); +#253880 = LINE('',#253881,#253882); +#253881 = CARTESIAN_POINT('',(157.075436,-43.273543,1.585)); +#253882 = VECTOR('',#253883,1.); +#253883 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#253884 = ORIENTED_EDGE('',*,*,#253885,.T.); +#253885 = EDGE_CURVE('',#253878,#253886,#253888,.T.); +#253886 = VERTEX_POINT('',#253887); +#253887 = CARTESIAN_POINT('',(157.010771,-43.372466,1.585)); +#253888 = LINE('',#253889,#253890); +#253889 = CARTESIAN_POINT('',(157.045029,-43.30395,1.585)); +#253890 = VECTOR('',#253891,1.); +#253891 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#253892 = ORIENTED_EDGE('',*,*,#253893,.T.); +#253893 = EDGE_CURVE('',#253886,#253894,#253896,.T.); +#253894 = VERTEX_POINT('',#253895); +#253895 = CARTESIAN_POINT('',(157.00933,-43.51225,1.585)); +#253896 = LINE('',#253897,#253898); +#253897 = CARTESIAN_POINT('',(157.010771,-43.372466,1.585)); +#253898 = VECTOR('',#253899,1.); +#253899 = DIRECTION('',(-1.030821437469E-02,-0.999946868947,0.)); +#253900 = ORIENTED_EDGE('',*,*,#253901,.T.); +#253901 = EDGE_CURVE('',#253894,#253902,#253904,.T.); +#253902 = VERTEX_POINT('',#253903); +#253903 = CARTESIAN_POINT('',(156.886383,-43.554061,1.585)); +#253904 = CIRCLE('',#253905,7.500015628754E-02); +#253905 = AXIS2_PLACEMENT_3D('',#253906,#253907,#253908); +#253906 = CARTESIAN_POINT('',(156.9357710461,-43.49761771567,1.585)); +#253907 = DIRECTION('',(-0.,0.,-1.)); +#253908 = DIRECTION('',(0.980784008184,-0.195096717785,-0.)); +#253909 = ORIENTED_EDGE('',*,*,#253910,.T.); +#253910 = EDGE_CURVE('',#253902,#253911,#253913,.T.); +#253911 = VERTEX_POINT('',#253912); +#253912 = CARTESIAN_POINT('',(156.629819,-43.329567,1.585)); +#253913 = LINE('',#253914,#253915); +#253914 = CARTESIAN_POINT('',(156.886383,-43.554061,1.585)); +#253915 = VECTOR('',#253916,1.); +#253916 = DIRECTION('',(-0.752575967874,0.658505438534,0.)); +#253917 = ORIENTED_EDGE('',*,*,#253918,.T.); +#253918 = EDGE_CURVE('',#253911,#253919,#253921,.T.); +#253919 = VERTEX_POINT('',#253920); +#253920 = CARTESIAN_POINT('',(156.628378,-43.797964,1.585)); +#253921 = LINE('',#253922,#253923); +#253922 = CARTESIAN_POINT('',(156.629819,-43.329567,1.585)); +#253923 = VECTOR('',#253924,1.); +#253924 = DIRECTION('',(-3.076435546862E-03,-0.999995267761,0.)); +#253925 = ORIENTED_EDGE('',*,*,#253926,.T.); +#253926 = EDGE_CURVE('',#253919,#253927,#253929,.T.); +#253927 = VERTEX_POINT('',#253928); +#253928 = CARTESIAN_POINT('',(156.479819,-43.783332,1.585)); +#253929 = CIRCLE('',#253930,7.500006711464E-02); +#253930 = AXIS2_PLACEMENT_3D('',#253931,#253932,#253933); +#253931 = CARTESIAN_POINT('',(156.55481906711,-43.78333206711,1.585)); +#253932 = DIRECTION('',(-0.,0.,-1.)); +#253933 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#253934 = ORIENTED_EDGE('',*,*,#253935,.T.); +#253935 = EDGE_CURVE('',#253927,#253936,#253938,.T.); +#253936 = VERTEX_POINT('',#253937); +#253937 = CARTESIAN_POINT('',(156.48126,-43.149653,1.585)); +#253938 = LINE('',#253939,#253940); +#253939 = CARTESIAN_POINT('',(156.479819,-43.783332,1.585)); +#253940 = VECTOR('',#253941,1.); +#253941 = DIRECTION('',(2.274016140951E-03,0.999997414422,0.)); +#253942 = ORIENTED_EDGE('',*,*,#253943,.T.); +#253943 = EDGE_CURVE('',#253936,#253944,#253946,.T.); +#253944 = VERTEX_POINT('',#253945); +#253945 = CARTESIAN_POINT('',(156.492459,-43.122617,1.585)); +#253946 = LINE('',#253947,#253948); +#253947 = CARTESIAN_POINT('',(156.48126,-43.149653,1.585)); +#253948 = VECTOR('',#253949,1.); +#253949 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#253950 = ORIENTED_EDGE('',*,*,#253951,.T.); +#253951 = EDGE_CURVE('',#253944,#253766,#253952,.T.); +#253952 = LINE('',#253953,#253954); +#253953 = CARTESIAN_POINT('',(156.492459,-43.122617,1.585)); +#253954 = VECTOR('',#253955,1.); +#253955 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#253956 = PLANE('',#253957); +#253957 = AXIS2_PLACEMENT_3D('',#253958,#253959,#253960); +#253958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253959 = DIRECTION('',(0.,0.,1.)); +#253960 = DIRECTION('',(1.,0.,-0.)); +#253961 = SHELL_BASED_SURFACE_MODEL('',(#253962)); +#253962 = OPEN_SHELL('',(#253963)); +#253963 = ADVANCED_FACE('',(#253964),#254098,.T.); +#253964 = FACE_BOUND('',#253965,.F.); +#253965 = EDGE_LOOP('',(#253966,#253976,#253984,#253993,#254001,#254009, + #254018,#254026,#254035,#254043,#254051,#254059,#254067,#254076, + #254084,#254092)); +#253966 = ORIENTED_EDGE('',*,*,#253967,.T.); +#253967 = EDGE_CURVE('',#253968,#253970,#253972,.T.); +#253968 = VERTEX_POINT('',#253969); +#253969 = CARTESIAN_POINT('',(118.662371,-42.174941,1.585)); +#253970 = VERTEX_POINT('',#253971); +#253971 = CARTESIAN_POINT('',(118.700827,-42.15436,1.585)); +#253972 = LINE('',#253973,#253974); +#253973 = CARTESIAN_POINT('',(118.662371,-42.174941,1.585)); +#253974 = VECTOR('',#253975,1.); +#253975 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#253976 = ORIENTED_EDGE('',*,*,#253977,.T.); +#253977 = EDGE_CURVE('',#253970,#253978,#253980,.T.); +#253978 = VERTEX_POINT('',#253979); +#253979 = CARTESIAN_POINT('',(118.722664,-42.15436,1.585)); +#253980 = LINE('',#253981,#253982); +#253981 = CARTESIAN_POINT('',(118.700827,-42.15436,1.585)); +#253982 = VECTOR('',#253983,1.); +#253983 = DIRECTION('',(1.,0.,0.)); +#253984 = ORIENTED_EDGE('',*,*,#253985,.T.); +#253985 = EDGE_CURVE('',#253978,#253986,#253988,.T.); +#253986 = VERTEX_POINT('',#253987); +#253987 = CARTESIAN_POINT('',(118.790459,-42.227919,1.585)); +#253988 = CIRCLE('',#253989,7.216898094229E-02); +#253989 = AXIS2_PLACEMENT_3D('',#253990,#253991,#253992); +#253990 = CARTESIAN_POINT('',(118.71830606389,-42.22639728342,1.585)); +#253991 = DIRECTION('',(0.,0.,-1.)); +#253992 = DIRECTION('',(6.038516895284E-02,0.998175150648,0.)); +#253993 = ORIENTED_EDGE('',*,*,#253994,.T.); +#253994 = EDGE_CURVE('',#253986,#253995,#253997,.T.); +#253995 = VERTEX_POINT('',#253996); +#253996 = CARTESIAN_POINT('',(118.790459,-43.152919,1.585)); +#253997 = LINE('',#253998,#253999); +#253998 = CARTESIAN_POINT('',(118.790459,-42.227919,1.585)); +#253999 = VECTOR('',#254000,1.); +#254000 = DIRECTION('',(0.,-1.,0.)); +#254001 = ORIENTED_EDGE('',*,*,#254002,.T.); +#254002 = EDGE_CURVE('',#253995,#254003,#254005,.T.); +#254003 = VERTEX_POINT('',#254004); +#254004 = CARTESIAN_POINT('',(119.015805,-43.15436,1.585)); +#254005 = LINE('',#254006,#254007); +#254006 = CARTESIAN_POINT('',(118.790459,-43.152919,1.585)); +#254007 = VECTOR('',#254008,1.); +#254008 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#254009 = ORIENTED_EDGE('',*,*,#254010,.T.); +#254010 = EDGE_CURVE('',#254003,#254011,#254013,.T.); +#254011 = VERTEX_POINT('',#254012); +#254012 = CARTESIAN_POINT('',(119.001173,-43.302919,1.585)); +#254013 = CIRCLE('',#254014,7.500006711465E-02); +#254014 = AXIS2_PLACEMENT_3D('',#254015,#254016,#254017); +#254015 = CARTESIAN_POINT('',(119.00117306711,-43.22791893288,1.585)); +#254016 = DIRECTION('',(0.,0.,-1.)); +#254017 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254018 = ORIENTED_EDGE('',*,*,#254019,.T.); +#254019 = EDGE_CURVE('',#254011,#254020,#254022,.T.); +#254020 = VERTEX_POINT('',#254021); +#254021 = CARTESIAN_POINT('',(118.415113,-43.301478,1.585)); +#254022 = LINE('',#254023,#254024); +#254023 = CARTESIAN_POINT('',(119.001173,-43.302919,1.585)); +#254024 = VECTOR('',#254025,1.); +#254025 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#254026 = ORIENTED_EDGE('',*,*,#254027,.T.); +#254027 = EDGE_CURVE('',#254020,#254028,#254030,.T.); +#254028 = VERTEX_POINT('',#254029); +#254029 = CARTESIAN_POINT('',(118.429745,-43.152919,1.585)); +#254030 = CIRCLE('',#254031,7.500006711464E-02); +#254031 = AXIS2_PLACEMENT_3D('',#254032,#254033,#254034); +#254032 = CARTESIAN_POINT('',(118.42974493288,-43.22791906711,1.585)); +#254033 = DIRECTION('',(0.,0.,-1.)); +#254034 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#254035 = ORIENTED_EDGE('',*,*,#254036,.T.); +#254036 = EDGE_CURVE('',#254028,#254037,#254039,.T.); +#254037 = VERTEX_POINT('',#254038); +#254038 = CARTESIAN_POINT('',(118.640459,-43.152919,1.585)); +#254039 = LINE('',#254040,#254041); +#254040 = CARTESIAN_POINT('',(118.429745,-43.152919,1.585)); +#254041 = VECTOR('',#254042,1.); +#254042 = DIRECTION('',(1.,0.,0.)); +#254043 = ORIENTED_EDGE('',*,*,#254044,.T.); +#254044 = EDGE_CURVE('',#254037,#254045,#254047,.T.); +#254045 = VERTEX_POINT('',#254046); +#254046 = CARTESIAN_POINT('',(118.640459,-42.456604,1.585)); +#254047 = LINE('',#254048,#254049); +#254048 = CARTESIAN_POINT('',(118.640459,-43.152919,1.585)); +#254049 = VECTOR('',#254050,1.); +#254050 = DIRECTION('',(0.,1.,0.)); +#254051 = ORIENTED_EDGE('',*,*,#254052,.T.); +#254052 = EDGE_CURVE('',#254045,#254053,#254055,.T.); +#254053 = VERTEX_POINT('',#254054); +#254054 = CARTESIAN_POINT('',(118.564823,-42.529131,1.585)); +#254055 = LINE('',#254056,#254057); +#254056 = CARTESIAN_POINT('',(118.640459,-42.456604,1.585)); +#254057 = VECTOR('',#254058,1.); +#254058 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#254059 = ORIENTED_EDGE('',*,*,#254060,.T.); +#254060 = EDGE_CURVE('',#254053,#254061,#254063,.T.); +#254061 = VERTEX_POINT('',#254062); +#254062 = CARTESIAN_POINT('',(118.449554,-42.58597,1.585)); +#254063 = LINE('',#254064,#254065); +#254064 = CARTESIAN_POINT('',(118.564823,-42.529131,1.585)); +#254065 = VECTOR('',#254066,1.); +#254066 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#254067 = ORIENTED_EDGE('',*,*,#254068,.T.); +#254068 = EDGE_CURVE('',#254061,#254069,#254071,.T.); +#254069 = VERTEX_POINT('',#254070); +#254070 = CARTESIAN_POINT('',(118.396204,-42.446551,1.585)); +#254071 = CIRCLE('',#254072,7.500005272362E-02); +#254072 = AXIS2_PLACEMENT_3D('',#254073,#254074,#254075); +#254073 = CARTESIAN_POINT('',(118.42974455676,-42.51363332972,1.585)); +#254074 = DIRECTION('',(0.,0.,-1.)); +#254075 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#254076 = ORIENTED_EDGE('',*,*,#254077,.T.); +#254077 = EDGE_CURVE('',#254069,#254078,#254080,.T.); +#254078 = VERTEX_POINT('',#254079); +#254079 = CARTESIAN_POINT('',(118.480556,-42.404375,1.585)); +#254080 = LINE('',#254081,#254082); +#254081 = CARTESIAN_POINT('',(118.396204,-42.446551,1.585)); +#254082 = VECTOR('',#254083,1.); +#254083 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#254084 = ORIENTED_EDGE('',*,*,#254085,.T.); +#254085 = EDGE_CURVE('',#254078,#254086,#254088,.T.); +#254086 = VERTEX_POINT('',#254087); +#254087 = CARTESIAN_POINT('',(118.561935,-42.322996,1.585)); +#254088 = LINE('',#254089,#254090); +#254089 = CARTESIAN_POINT('',(118.480556,-42.404375,1.585)); +#254090 = VECTOR('',#254091,1.); +#254091 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254092 = ORIENTED_EDGE('',*,*,#254093,.T.); +#254093 = EDGE_CURVE('',#254086,#253968,#254094,.T.); +#254094 = LINE('',#254095,#254096); +#254095 = CARTESIAN_POINT('',(118.561935,-42.322996,1.585)); +#254096 = VECTOR('',#254097,1.); +#254097 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#254098 = PLANE('',#254099); +#254099 = AXIS2_PLACEMENT_3D('',#254100,#254101,#254102); +#254100 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254101 = DIRECTION('',(0.,0.,1.)); +#254102 = DIRECTION('',(1.,0.,-0.)); +#254103 = SHELL_BASED_SURFACE_MODEL('',(#254104)); +#254104 = OPEN_SHELL('',(#254105)); +#254105 = ADVANCED_FACE('',(#254106),#254265,.T.); +#254106 = FACE_BOUND('',#254107,.F.); +#254107 = EDGE_LOOP('',(#254108,#254119,#254127,#254135,#254143,#254151, + #254159,#254167,#254176,#254184,#254193,#254201,#254209,#254217, + #254226,#254234,#254242,#254250,#254259)); +#254108 = ORIENTED_EDGE('',*,*,#254109,.T.); +#254109 = EDGE_CURVE('',#254110,#254112,#254114,.T.); +#254110 = VERTEX_POINT('',#254111); +#254111 = CARTESIAN_POINT('',(128.670014,-42.208456,1.585)); +#254112 = VERTEX_POINT('',#254113); +#254113 = CARTESIAN_POINT('',(129.179409,-42.217786,1.585)); +#254114 = CIRCLE('',#254115,0.450326844012); +#254115 = AXIS2_PLACEMENT_3D('',#254116,#254117,#254118); +#254116 = CARTESIAN_POINT('',(128.9179110301,-42.58440989199,1.585)); +#254117 = DIRECTION('',(0.,0.,-1.)); +#254118 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#254119 = ORIENTED_EDGE('',*,*,#254120,.T.); +#254120 = EDGE_CURVE('',#254112,#254121,#254123,.T.); +#254121 = VERTEX_POINT('',#254122); +#254122 = CARTESIAN_POINT('',(129.242862,-42.283316,1.585)); +#254123 = LINE('',#254124,#254125); +#254124 = CARTESIAN_POINT('',(129.179409,-42.217786,1.585)); +#254125 = VECTOR('',#254126,1.); +#254126 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#254127 = ORIENTED_EDGE('',*,*,#254128,.T.); +#254128 = EDGE_CURVE('',#254121,#254129,#254131,.T.); +#254129 = VERTEX_POINT('',#254130); +#254130 = CARTESIAN_POINT('',(129.300923,-42.403763,1.585)); +#254131 = LINE('',#254132,#254133); +#254132 = CARTESIAN_POINT('',(129.242862,-42.283316,1.585)); +#254133 = VECTOR('',#254134,1.); +#254134 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#254135 = ORIENTED_EDGE('',*,*,#254136,.T.); +#254136 = EDGE_CURVE('',#254129,#254137,#254139,.T.); +#254137 = VERTEX_POINT('',#254138); +#254138 = CARTESIAN_POINT('',(129.300164,-42.530095,1.585)); +#254139 = LINE('',#254140,#254141); +#254140 = CARTESIAN_POINT('',(129.300923,-42.403763,1.585)); +#254141 = VECTOR('',#254142,1.); +#254142 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#254143 = ORIENTED_EDGE('',*,*,#254144,.T.); +#254144 = EDGE_CURVE('',#254137,#254145,#254147,.T.); +#254145 = VERTEX_POINT('',#254146); +#254146 = CARTESIAN_POINT('',(129.242106,-42.698158,1.585)); +#254147 = LINE('',#254148,#254149); +#254148 = CARTESIAN_POINT('',(129.300164,-42.530095,1.585)); +#254149 = VECTOR('',#254150,1.); +#254150 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#254151 = ORIENTED_EDGE('',*,*,#254152,.T.); +#254152 = EDGE_CURVE('',#254145,#254153,#254155,.T.); +#254153 = VERTEX_POINT('',#254154); +#254154 = CARTESIAN_POINT('',(128.789383,-43.152919,1.585)); +#254155 = LINE('',#254156,#254157); +#254156 = CARTESIAN_POINT('',(129.242106,-42.698158,1.585)); +#254157 = VECTOR('',#254158,1.); +#254158 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#254159 = ORIENTED_EDGE('',*,*,#254160,.T.); +#254160 = EDGE_CURVE('',#254153,#254161,#254163,.T.); +#254161 = VERTEX_POINT('',#254162); +#254162 = CARTESIAN_POINT('',(129.241996,-43.15436,1.585)); +#254163 = LINE('',#254164,#254165); +#254164 = CARTESIAN_POINT('',(128.789383,-43.152919,1.585)); +#254165 = VECTOR('',#254166,1.); +#254166 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#254167 = ORIENTED_EDGE('',*,*,#254168,.T.); +#254168 = EDGE_CURVE('',#254161,#254169,#254171,.T.); +#254169 = VERTEX_POINT('',#254170); +#254170 = CARTESIAN_POINT('',(129.227364,-43.302919,1.585)); +#254171 = CIRCLE('',#254172,7.500006711465E-02); +#254172 = AXIS2_PLACEMENT_3D('',#254173,#254174,#254175); +#254173 = CARTESIAN_POINT('',(129.22736406711,-43.22791893288,1.585)); +#254174 = DIRECTION('',(0.,0.,-1.)); +#254175 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254176 = ORIENTED_EDGE('',*,*,#254177,.T.); +#254177 = EDGE_CURVE('',#254169,#254178,#254180,.T.); +#254178 = VERTEX_POINT('',#254179); +#254179 = CARTESIAN_POINT('',(128.593685,-43.301478,1.585)); +#254180 = LINE('',#254181,#254182); +#254181 = CARTESIAN_POINT('',(129.227364,-43.302919,1.585)); +#254182 = VECTOR('',#254183,1.); +#254183 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#254184 = ORIENTED_EDGE('',*,*,#254185,.T.); +#254185 = EDGE_CURVE('',#254178,#254186,#254188,.T.); +#254186 = VERTEX_POINT('',#254187); +#254187 = CARTESIAN_POINT('',(128.555284,-43.174886,1.585)); +#254188 = CIRCLE('',#254189,7.500021013109E-02); +#254189 = AXIS2_PLACEMENT_3D('',#254190,#254191,#254192); +#254190 = CARTESIAN_POINT('',(128.6083173167,-43.22791899764,1.585)); +#254191 = DIRECTION('',(0.,0.,-1.)); +#254192 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#254193 = ORIENTED_EDGE('',*,*,#254194,.T.); +#254194 = EDGE_CURVE('',#254186,#254195,#254197,.T.); +#254195 = VERTEX_POINT('',#254196); +#254196 = CARTESIAN_POINT('',(129.114192,-42.615976,1.585)); +#254197 = LINE('',#254198,#254199); +#254198 = CARTESIAN_POINT('',(128.555284,-43.174886,1.585)); +#254199 = VECTOR('',#254200,1.); +#254200 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#254201 = ORIENTED_EDGE('',*,*,#254202,.T.); +#254202 = EDGE_CURVE('',#254195,#254203,#254205,.T.); +#254203 = VERTEX_POINT('',#254204); +#254204 = CARTESIAN_POINT('',(129.152364,-42.501463,1.585)); +#254205 = LINE('',#254206,#254207); +#254206 = CARTESIAN_POINT('',(129.114192,-42.615976,1.585)); +#254207 = VECTOR('',#254208,1.); +#254208 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#254209 = ORIENTED_EDGE('',*,*,#254210,.T.); +#254210 = EDGE_CURVE('',#254203,#254211,#254213,.T.); +#254211 = VERTEX_POINT('',#254212); +#254212 = CARTESIAN_POINT('',(129.152364,-42.4361,1.585)); +#254213 = LINE('',#254214,#254215); +#254214 = CARTESIAN_POINT('',(129.152364,-42.501463,1.585)); +#254215 = VECTOR('',#254216,1.); +#254216 = DIRECTION('',(0.,1.,0.)); +#254217 = ORIENTED_EDGE('',*,*,#254218,.T.); +#254218 = EDGE_CURVE('',#254211,#254219,#254221,.T.); +#254219 = VERTEX_POINT('',#254220); +#254220 = CARTESIAN_POINT('',(129.019183,-42.302919,1.585)); +#254221 = CIRCLE('',#254222,0.18686440374); +#254222 = AXIS2_PLACEMENT_3D('',#254223,#254224,#254225); +#254223 = CARTESIAN_POINT('',(128.971647,-42.483636,1.585)); +#254224 = DIRECTION('',(0.,0.,1.)); +#254225 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#254226 = ORIENTED_EDGE('',*,*,#254227,.T.); +#254227 = EDGE_CURVE('',#254219,#254228,#254230,.T.); +#254228 = VERTEX_POINT('',#254229); +#254229 = CARTESIAN_POINT('',(128.816498,-42.302919,1.585)); +#254230 = LINE('',#254231,#254232); +#254231 = CARTESIAN_POINT('',(129.019183,-42.302919,1.585)); +#254232 = VECTOR('',#254233,1.); +#254233 = DIRECTION('',(-1.,0.,0.)); +#254234 = ORIENTED_EDGE('',*,*,#254235,.T.); +#254235 = EDGE_CURVE('',#254228,#254236,#254238,.T.); +#254236 = VERTEX_POINT('',#254237); +#254237 = CARTESIAN_POINT('',(128.747982,-42.337177,1.585)); +#254238 = LINE('',#254239,#254240); +#254239 = CARTESIAN_POINT('',(128.816498,-42.302919,1.585)); +#254240 = VECTOR('',#254241,1.); +#254241 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#254242 = ORIENTED_EDGE('',*,*,#254243,.T.); +#254243 = EDGE_CURVE('',#254236,#254244,#254246,.T.); +#254244 = VERTEX_POINT('',#254245); +#254245 = CARTESIAN_POINT('',(128.697604,-42.385517,1.585)); +#254246 = LINE('',#254247,#254248); +#254247 = CARTESIAN_POINT('',(128.747982,-42.337177,1.585)); +#254248 = VECTOR('',#254249,1.); +#254249 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#254250 = ORIENTED_EDGE('',*,*,#254251,.T.); +#254251 = EDGE_CURVE('',#254244,#254252,#254254,.T.); +#254252 = VERTEX_POINT('',#254253); +#254253 = CARTESIAN_POINT('',(128.602903,-42.270124,1.585)); +#254254 = CIRCLE('',#254255,7.499996838527E-02); +#254255 = AXIS2_PLACEMENT_3D('',#254256,#254257,#254258); +#254256 = CARTESIAN_POINT('',(128.655936,-42.32315697246,1.585)); +#254257 = DIRECTION('',(0.,0.,-1.)); +#254258 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#254259 = ORIENTED_EDGE('',*,*,#254260,.T.); +#254260 = EDGE_CURVE('',#254252,#254110,#254261,.T.); +#254261 = LINE('',#254262,#254263); +#254262 = CARTESIAN_POINT('',(128.602903,-42.270124,1.585)); +#254263 = VECTOR('',#254264,1.); +#254264 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#254265 = PLANE('',#254266); +#254266 = AXIS2_PLACEMENT_3D('',#254267,#254268,#254269); +#254267 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254268 = DIRECTION('',(0.,0.,1.)); +#254269 = DIRECTION('',(1.,0.,-0.)); +#254270 = SHELL_BASED_SURFACE_MODEL('',(#254271)); +#254271 = OPEN_SHELL('',(#254272)); +#254272 = ADVANCED_FACE('',(#254273),#254407,.T.); +#254273 = FACE_BOUND('',#254274,.F.); +#254274 = EDGE_LOOP('',(#254275,#254285,#254293,#254302,#254310,#254318, + #254327,#254335,#254344,#254352,#254360,#254368,#254376,#254385, + #254393,#254401)); +#254275 = ORIENTED_EDGE('',*,*,#254276,.T.); +#254276 = EDGE_CURVE('',#254277,#254279,#254281,.T.); +#254277 = VERTEX_POINT('',#254278); +#254278 = CARTESIAN_POINT('',(137.012371,-42.174941,1.585)); +#254279 = VERTEX_POINT('',#254280); +#254280 = CARTESIAN_POINT('',(137.050827,-42.15436,1.585)); +#254281 = LINE('',#254282,#254283); +#254282 = CARTESIAN_POINT('',(137.012371,-42.174941,1.585)); +#254283 = VECTOR('',#254284,1.); +#254284 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#254285 = ORIENTED_EDGE('',*,*,#254286,.T.); +#254286 = EDGE_CURVE('',#254279,#254287,#254289,.T.); +#254287 = VERTEX_POINT('',#254288); +#254288 = CARTESIAN_POINT('',(137.072664,-42.15436,1.585)); +#254289 = LINE('',#254290,#254291); +#254290 = CARTESIAN_POINT('',(137.050827,-42.15436,1.585)); +#254291 = VECTOR('',#254292,1.); +#254292 = DIRECTION('',(1.,0.,0.)); +#254293 = ORIENTED_EDGE('',*,*,#254294,.T.); +#254294 = EDGE_CURVE('',#254287,#254295,#254297,.T.); +#254295 = VERTEX_POINT('',#254296); +#254296 = CARTESIAN_POINT('',(137.140459,-42.227919,1.585)); +#254297 = CIRCLE('',#254298,7.216898094227E-02); +#254298 = AXIS2_PLACEMENT_3D('',#254299,#254300,#254301); +#254299 = CARTESIAN_POINT('',(137.06830606389,-42.22639728342,1.585)); +#254300 = DIRECTION('',(0.,0.,-1.)); +#254301 = DIRECTION('',(6.038516895266E-02,0.998175150648,0.)); +#254302 = ORIENTED_EDGE('',*,*,#254303,.T.); +#254303 = EDGE_CURVE('',#254295,#254304,#254306,.T.); +#254304 = VERTEX_POINT('',#254305); +#254305 = CARTESIAN_POINT('',(137.140459,-43.152919,1.585)); +#254306 = LINE('',#254307,#254308); +#254307 = CARTESIAN_POINT('',(137.140459,-42.227919,1.585)); +#254308 = VECTOR('',#254309,1.); +#254309 = DIRECTION('',(0.,-1.,0.)); +#254310 = ORIENTED_EDGE('',*,*,#254311,.T.); +#254311 = EDGE_CURVE('',#254304,#254312,#254314,.T.); +#254312 = VERTEX_POINT('',#254313); +#254313 = CARTESIAN_POINT('',(137.365805,-43.15436,1.585)); +#254314 = LINE('',#254315,#254316); +#254315 = CARTESIAN_POINT('',(137.140459,-43.152919,1.585)); +#254316 = VECTOR('',#254317,1.); +#254317 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#254318 = ORIENTED_EDGE('',*,*,#254319,.T.); +#254319 = EDGE_CURVE('',#254312,#254320,#254322,.T.); +#254320 = VERTEX_POINT('',#254321); +#254321 = CARTESIAN_POINT('',(137.351173,-43.302919,1.585)); +#254322 = CIRCLE('',#254323,7.500006711465E-02); +#254323 = AXIS2_PLACEMENT_3D('',#254324,#254325,#254326); +#254324 = CARTESIAN_POINT('',(137.35117306711,-43.22791893288,1.585)); +#254325 = DIRECTION('',(0.,0.,-1.)); +#254326 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254327 = ORIENTED_EDGE('',*,*,#254328,.T.); +#254328 = EDGE_CURVE('',#254320,#254329,#254331,.T.); +#254329 = VERTEX_POINT('',#254330); +#254330 = CARTESIAN_POINT('',(136.765113,-43.301478,1.585)); +#254331 = LINE('',#254332,#254333); +#254332 = CARTESIAN_POINT('',(137.351173,-43.302919,1.585)); +#254333 = VECTOR('',#254334,1.); +#254334 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#254335 = ORIENTED_EDGE('',*,*,#254336,.T.); +#254336 = EDGE_CURVE('',#254329,#254337,#254339,.T.); +#254337 = VERTEX_POINT('',#254338); +#254338 = CARTESIAN_POINT('',(136.779745,-43.152919,1.585)); +#254339 = CIRCLE('',#254340,7.500006711464E-02); +#254340 = AXIS2_PLACEMENT_3D('',#254341,#254342,#254343); +#254341 = CARTESIAN_POINT('',(136.77974493288,-43.22791906711,1.585)); +#254342 = DIRECTION('',(0.,0.,-1.)); +#254343 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#254344 = ORIENTED_EDGE('',*,*,#254345,.T.); +#254345 = EDGE_CURVE('',#254337,#254346,#254348,.T.); +#254346 = VERTEX_POINT('',#254347); +#254347 = CARTESIAN_POINT('',(136.990459,-43.152919,1.585)); +#254348 = LINE('',#254349,#254350); +#254349 = CARTESIAN_POINT('',(136.779745,-43.152919,1.585)); +#254350 = VECTOR('',#254351,1.); +#254351 = DIRECTION('',(1.,0.,0.)); +#254352 = ORIENTED_EDGE('',*,*,#254353,.T.); +#254353 = EDGE_CURVE('',#254346,#254354,#254356,.T.); +#254354 = VERTEX_POINT('',#254355); +#254355 = CARTESIAN_POINT('',(136.990459,-42.456604,1.585)); +#254356 = LINE('',#254357,#254358); +#254357 = CARTESIAN_POINT('',(136.990459,-43.152919,1.585)); +#254358 = VECTOR('',#254359,1.); +#254359 = DIRECTION('',(0.,1.,0.)); +#254360 = ORIENTED_EDGE('',*,*,#254361,.T.); +#254361 = EDGE_CURVE('',#254354,#254362,#254364,.T.); +#254362 = VERTEX_POINT('',#254363); +#254363 = CARTESIAN_POINT('',(136.914823,-42.529131,1.585)); +#254364 = LINE('',#254365,#254366); +#254365 = CARTESIAN_POINT('',(136.990459,-42.456604,1.585)); +#254366 = VECTOR('',#254367,1.); +#254367 = DIRECTION('',(-0.721785571395,-0.692116745156,0.)); +#254368 = ORIENTED_EDGE('',*,*,#254369,.T.); +#254369 = EDGE_CURVE('',#254362,#254370,#254372,.T.); +#254370 = VERTEX_POINT('',#254371); +#254371 = CARTESIAN_POINT('',(136.799554,-42.58597,1.585)); +#254372 = LINE('',#254373,#254374); +#254373 = CARTESIAN_POINT('',(136.914823,-42.529131,1.585)); +#254374 = VECTOR('',#254375,1.); +#254375 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#254376 = ORIENTED_EDGE('',*,*,#254377,.T.); +#254377 = EDGE_CURVE('',#254370,#254378,#254380,.T.); +#254378 = VERTEX_POINT('',#254379); +#254379 = CARTESIAN_POINT('',(136.746204,-42.446551,1.585)); +#254380 = CIRCLE('',#254381,7.500005272361E-02); +#254381 = AXIS2_PLACEMENT_3D('',#254382,#254383,#254384); +#254382 = CARTESIAN_POINT('',(136.77974455676,-42.51363332972,1.585)); +#254383 = DIRECTION('',(0.,0.,-1.)); +#254384 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#254385 = ORIENTED_EDGE('',*,*,#254386,.T.); +#254386 = EDGE_CURVE('',#254378,#254387,#254389,.T.); +#254387 = VERTEX_POINT('',#254388); +#254388 = CARTESIAN_POINT('',(136.830556,-42.404375,1.585)); +#254389 = LINE('',#254390,#254391); +#254390 = CARTESIAN_POINT('',(136.746204,-42.446551,1.585)); +#254391 = VECTOR('',#254392,1.); +#254392 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#254393 = ORIENTED_EDGE('',*,*,#254394,.T.); +#254394 = EDGE_CURVE('',#254387,#254395,#254397,.T.); +#254395 = VERTEX_POINT('',#254396); +#254396 = CARTESIAN_POINT('',(136.911935,-42.322996,1.585)); +#254397 = LINE('',#254398,#254399); +#254398 = CARTESIAN_POINT('',(136.830556,-42.404375,1.585)); +#254399 = VECTOR('',#254400,1.); +#254400 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254401 = ORIENTED_EDGE('',*,*,#254402,.T.); +#254402 = EDGE_CURVE('',#254395,#254277,#254403,.T.); +#254403 = LINE('',#254404,#254405); +#254404 = CARTESIAN_POINT('',(136.911935,-42.322996,1.585)); +#254405 = VECTOR('',#254406,1.); +#254406 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#254407 = PLANE('',#254408); +#254408 = AXIS2_PLACEMENT_3D('',#254409,#254410,#254411); +#254409 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254410 = DIRECTION('',(0.,0.,1.)); +#254411 = DIRECTION('',(1.,0.,-0.)); +#254412 = SHELL_BASED_SURFACE_MODEL('',(#254413)); +#254413 = OPEN_SHELL('',(#254414)); +#254414 = ADVANCED_FACE('',(#254415),#254549,.T.); +#254415 = FACE_BOUND('',#254416,.F.); +#254416 = EDGE_LOOP('',(#254417,#254427,#254435,#254444,#254452,#254460, + #254469,#254477,#254486,#254494,#254502,#254510,#254518,#254527, + #254535,#254543)); +#254417 = ORIENTED_EDGE('',*,*,#254418,.T.); +#254418 = EDGE_CURVE('',#254419,#254421,#254423,.T.); +#254419 = VERTEX_POINT('',#254420); +#254420 = CARTESIAN_POINT('',(137.964752,-42.174941,1.585)); +#254421 = VERTEX_POINT('',#254422); +#254422 = CARTESIAN_POINT('',(138.003208,-42.15436,1.585)); +#254423 = LINE('',#254424,#254425); +#254424 = CARTESIAN_POINT('',(137.964752,-42.174941,1.585)); +#254425 = VECTOR('',#254426,1.); +#254426 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#254427 = ORIENTED_EDGE('',*,*,#254428,.T.); +#254428 = EDGE_CURVE('',#254421,#254429,#254431,.T.); +#254429 = VERTEX_POINT('',#254430); +#254430 = CARTESIAN_POINT('',(138.025045,-42.15436,1.585)); +#254431 = LINE('',#254432,#254433); +#254432 = CARTESIAN_POINT('',(138.003208,-42.15436,1.585)); +#254433 = VECTOR('',#254434,1.); +#254434 = DIRECTION('',(1.,0.,0.)); +#254435 = ORIENTED_EDGE('',*,*,#254436,.T.); +#254436 = EDGE_CURVE('',#254429,#254437,#254439,.T.); +#254437 = VERTEX_POINT('',#254438); +#254438 = CARTESIAN_POINT('',(138.09284,-42.227919,1.585)); +#254439 = CIRCLE('',#254440,7.216898094227E-02); +#254440 = AXIS2_PLACEMENT_3D('',#254441,#254442,#254443); +#254441 = CARTESIAN_POINT('',(138.02068706389,-42.22639728342,1.585)); +#254442 = DIRECTION('',(0.,0.,-1.)); +#254443 = DIRECTION('',(6.038516895266E-02,0.998175150648,0.)); +#254444 = ORIENTED_EDGE('',*,*,#254445,.T.); +#254445 = EDGE_CURVE('',#254437,#254446,#254448,.T.); +#254446 = VERTEX_POINT('',#254447); +#254447 = CARTESIAN_POINT('',(138.09284,-43.152919,1.585)); +#254448 = LINE('',#254449,#254450); +#254449 = CARTESIAN_POINT('',(138.09284,-42.227919,1.585)); +#254450 = VECTOR('',#254451,1.); +#254451 = DIRECTION('',(0.,-1.,0.)); +#254452 = ORIENTED_EDGE('',*,*,#254453,.T.); +#254453 = EDGE_CURVE('',#254446,#254454,#254456,.T.); +#254454 = VERTEX_POINT('',#254455); +#254455 = CARTESIAN_POINT('',(138.318186,-43.15436,1.585)); +#254456 = LINE('',#254457,#254458); +#254457 = CARTESIAN_POINT('',(138.09284,-43.152919,1.585)); +#254458 = VECTOR('',#254459,1.); +#254459 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#254460 = ORIENTED_EDGE('',*,*,#254461,.T.); +#254461 = EDGE_CURVE('',#254454,#254462,#254464,.T.); +#254462 = VERTEX_POINT('',#254463); +#254463 = CARTESIAN_POINT('',(138.303554,-43.302919,1.585)); +#254464 = CIRCLE('',#254465,7.500006711465E-02); +#254465 = AXIS2_PLACEMENT_3D('',#254466,#254467,#254468); +#254466 = CARTESIAN_POINT('',(138.30355406711,-43.22791893288,1.585)); +#254467 = DIRECTION('',(0.,0.,-1.)); +#254468 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254469 = ORIENTED_EDGE('',*,*,#254470,.T.); +#254470 = EDGE_CURVE('',#254462,#254471,#254473,.T.); +#254471 = VERTEX_POINT('',#254472); +#254472 = CARTESIAN_POINT('',(137.717494,-43.301478,1.585)); +#254473 = LINE('',#254474,#254475); +#254474 = CARTESIAN_POINT('',(138.303554,-43.302919,1.585)); +#254475 = VECTOR('',#254476,1.); +#254476 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#254477 = ORIENTED_EDGE('',*,*,#254478,.T.); +#254478 = EDGE_CURVE('',#254471,#254479,#254481,.T.); +#254479 = VERTEX_POINT('',#254480); +#254480 = CARTESIAN_POINT('',(137.732126,-43.152919,1.585)); +#254481 = CIRCLE('',#254482,7.500006711464E-02); +#254482 = AXIS2_PLACEMENT_3D('',#254483,#254484,#254485); +#254483 = CARTESIAN_POINT('',(137.73212593288,-43.22791906711,1.585)); +#254484 = DIRECTION('',(0.,0.,-1.)); +#254485 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#254486 = ORIENTED_EDGE('',*,*,#254487,.T.); +#254487 = EDGE_CURVE('',#254479,#254488,#254490,.T.); +#254488 = VERTEX_POINT('',#254489); +#254489 = CARTESIAN_POINT('',(137.94284,-43.152919,1.585)); +#254490 = LINE('',#254491,#254492); +#254491 = CARTESIAN_POINT('',(137.732126,-43.152919,1.585)); +#254492 = VECTOR('',#254493,1.); +#254493 = DIRECTION('',(1.,0.,0.)); +#254494 = ORIENTED_EDGE('',*,*,#254495,.T.); +#254495 = EDGE_CURVE('',#254488,#254496,#254498,.T.); +#254496 = VERTEX_POINT('',#254497); +#254497 = CARTESIAN_POINT('',(137.94284,-42.456604,1.585)); +#254498 = LINE('',#254499,#254500); +#254499 = CARTESIAN_POINT('',(137.94284,-43.152919,1.585)); +#254500 = VECTOR('',#254501,1.); +#254501 = DIRECTION('',(0.,1.,0.)); +#254502 = ORIENTED_EDGE('',*,*,#254503,.T.); +#254503 = EDGE_CURVE('',#254496,#254504,#254506,.T.); +#254504 = VERTEX_POINT('',#254505); +#254505 = CARTESIAN_POINT('',(137.867204,-42.529131,1.585)); +#254506 = LINE('',#254507,#254508); +#254507 = CARTESIAN_POINT('',(137.94284,-42.456604,1.585)); +#254508 = VECTOR('',#254509,1.); +#254509 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#254510 = ORIENTED_EDGE('',*,*,#254511,.T.); +#254511 = EDGE_CURVE('',#254504,#254512,#254514,.T.); +#254512 = VERTEX_POINT('',#254513); +#254513 = CARTESIAN_POINT('',(137.751935,-42.58597,1.585)); +#254514 = LINE('',#254515,#254516); +#254515 = CARTESIAN_POINT('',(137.867204,-42.529131,1.585)); +#254516 = VECTOR('',#254517,1.); +#254517 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#254518 = ORIENTED_EDGE('',*,*,#254519,.T.); +#254519 = EDGE_CURVE('',#254512,#254520,#254522,.T.); +#254520 = VERTEX_POINT('',#254521); +#254521 = CARTESIAN_POINT('',(137.698585,-42.446551,1.585)); +#254522 = CIRCLE('',#254523,7.500005272361E-02); +#254523 = AXIS2_PLACEMENT_3D('',#254524,#254525,#254526); +#254524 = CARTESIAN_POINT('',(137.73212555676,-42.51363332972,1.585)); +#254525 = DIRECTION('',(0.,0.,-1.)); +#254526 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#254527 = ORIENTED_EDGE('',*,*,#254528,.T.); +#254528 = EDGE_CURVE('',#254520,#254529,#254531,.T.); +#254529 = VERTEX_POINT('',#254530); +#254530 = CARTESIAN_POINT('',(137.782937,-42.404375,1.585)); +#254531 = LINE('',#254532,#254533); +#254532 = CARTESIAN_POINT('',(137.698585,-42.446551,1.585)); +#254533 = VECTOR('',#254534,1.); +#254534 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#254535 = ORIENTED_EDGE('',*,*,#254536,.T.); +#254536 = EDGE_CURVE('',#254529,#254537,#254539,.T.); +#254537 = VERTEX_POINT('',#254538); +#254538 = CARTESIAN_POINT('',(137.864316,-42.322996,1.585)); +#254539 = LINE('',#254540,#254541); +#254540 = CARTESIAN_POINT('',(137.782937,-42.404375,1.585)); +#254541 = VECTOR('',#254542,1.); +#254542 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254543 = ORIENTED_EDGE('',*,*,#254544,.T.); +#254544 = EDGE_CURVE('',#254537,#254419,#254545,.T.); +#254545 = LINE('',#254546,#254547); +#254546 = CARTESIAN_POINT('',(137.864316,-42.322996,1.585)); +#254547 = VECTOR('',#254548,1.); +#254548 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#254549 = PLANE('',#254550); +#254550 = AXIS2_PLACEMENT_3D('',#254551,#254552,#254553); +#254551 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254552 = DIRECTION('',(0.,0.,1.)); +#254553 = DIRECTION('',(1.,0.,-0.)); +#254554 = SHELL_BASED_SURFACE_MODEL('',(#254555)); +#254555 = OPEN_SHELL('',(#254556)); +#254556 = ADVANCED_FACE('',(#254557,#254635),#254687,.T.); +#254557 = FACE_BOUND('',#254558,.F.); +#254558 = EDGE_LOOP('',(#254559,#254570,#254578,#254587,#254595,#254604, + #254612,#254620,#254629)); +#254559 = ORIENTED_EDGE('',*,*,#254560,.T.); +#254560 = EDGE_CURVE('',#254561,#254563,#254565,.T.); +#254561 = VERTEX_POINT('',#254562); +#254562 = CARTESIAN_POINT('',(101.129996,-42.213287,1.585)); +#254563 = VERTEX_POINT('',#254564); +#254564 = CARTESIAN_POINT('',(101.203555,-42.152919,1.585)); +#254565 = CIRCLE('',#254566,7.500074938982E-02); +#254566 = AXIS2_PLACEMENT_3D('',#254567,#254568,#254569); +#254567 = CARTESIAN_POINT('',(101.20355546611,-42.22791974938,1.585)); +#254568 = DIRECTION('',(0.,0.,-1.)); +#254569 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#254570 = ORIENTED_EDGE('',*,*,#254571,.T.); +#254571 = EDGE_CURVE('',#254563,#254572,#254574,.T.); +#254572 = VERTEX_POINT('',#254573); +#254573 = CARTESIAN_POINT('',(101.599139,-42.15436,1.585)); +#254574 = LINE('',#254575,#254576); +#254575 = CARTESIAN_POINT('',(101.203555,-42.152919,1.585)); +#254576 = VECTOR('',#254577,1.); +#254577 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#254578 = ORIENTED_EDGE('',*,*,#254579,.T.); +#254579 = EDGE_CURVE('',#254572,#254580,#254582,.T.); +#254580 = VERTEX_POINT('',#254581); +#254581 = CARTESIAN_POINT('',(101.848542,-42.403763,1.585)); +#254582 = CIRCLE('',#254583,0.347870264855); +#254583 = AXIS2_PLACEMENT_3D('',#254584,#254585,#254586); +#254584 = CARTESIAN_POINT('',(101.51181126502,-42.49109073497,1.585)); +#254585 = DIRECTION('',(0.,0.,-1.)); +#254586 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#254587 = ORIENTED_EDGE('',*,*,#254588,.T.); +#254588 = EDGE_CURVE('',#254580,#254589,#254591,.T.); +#254589 = VERTEX_POINT('',#254590); +#254590 = CARTESIAN_POINT('',(101.84732,-42.581062,1.585)); +#254591 = LINE('',#254592,#254593); +#254592 = CARTESIAN_POINT('',(101.848542,-42.403763,1.585)); +#254593 = VECTOR('',#254594,1.); +#254594 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#254595 = ORIENTED_EDGE('',*,*,#254596,.T.); +#254596 = EDGE_CURVE('',#254589,#254597,#254599,.T.); +#254597 = VERTEX_POINT('',#254598); +#254598 = CARTESIAN_POINT('',(101.599139,-42.825287,1.585)); +#254599 = CIRCLE('',#254600,0.348632345848); +#254600 = AXIS2_PLACEMENT_3D('',#254601,#254602,#254603); +#254601 = CARTESIAN_POINT('',(101.51137019403,-42.4878834593,1.585)); +#254602 = DIRECTION('',(0.,0.,-1.)); +#254603 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#254604 = ORIENTED_EDGE('',*,*,#254605,.T.); +#254605 = EDGE_CURVE('',#254597,#254606,#254608,.T.); +#254606 = VERTEX_POINT('',#254607); +#254607 = CARTESIAN_POINT('',(101.278555,-42.826728,1.585)); +#254608 = LINE('',#254609,#254610); +#254609 = CARTESIAN_POINT('',(101.599139,-42.825287,1.585)); +#254610 = VECTOR('',#254611,1.); +#254611 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#254612 = ORIENTED_EDGE('',*,*,#254613,.T.); +#254613 = EDGE_CURVE('',#254606,#254614,#254616,.T.); +#254614 = VERTEX_POINT('',#254615); +#254615 = CARTESIAN_POINT('',(101.277114,-43.242551,1.585)); +#254616 = LINE('',#254617,#254618); +#254617 = CARTESIAN_POINT('',(101.278555,-42.826728,1.585)); +#254618 = VECTOR('',#254619,1.); +#254619 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#254620 = ORIENTED_EDGE('',*,*,#254621,.T.); +#254621 = EDGE_CURVE('',#254614,#254622,#254624,.T.); +#254622 = VERTEX_POINT('',#254623); +#254623 = CARTESIAN_POINT('',(101.128555,-43.227919,1.585)); +#254624 = CIRCLE('',#254625,7.500006711463E-02); +#254625 = AXIS2_PLACEMENT_3D('',#254626,#254627,#254628); +#254626 = CARTESIAN_POINT('',(101.20355506711,-43.22791906711,1.585)); +#254627 = DIRECTION('',(-0.,0.,-1.)); +#254628 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#254629 = ORIENTED_EDGE('',*,*,#254630,.T.); +#254630 = EDGE_CURVE('',#254622,#254561,#254631,.T.); +#254631 = LINE('',#254632,#254633); +#254632 = CARTESIAN_POINT('',(101.128555,-43.227919,1.585)); +#254633 = VECTOR('',#254634,1.); +#254634 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#254635 = FACE_BOUND('',#254636,.F.); +#254636 = EDGE_LOOP('',(#254637,#254648,#254656,#254664,#254672,#254681) + ); +#254637 = ORIENTED_EDGE('',*,*,#254638,.T.); +#254638 = EDGE_CURVE('',#254639,#254641,#254643,.T.); +#254639 = VERTEX_POINT('',#254640); +#254640 = CARTESIAN_POINT('',(101.699983,-42.4361,1.585)); +#254641 = VERTEX_POINT('',#254642); +#254642 = CARTESIAN_POINT('',(101.566802,-42.302919,1.585)); +#254643 = CIRCLE('',#254644,0.18686440374); +#254644 = AXIS2_PLACEMENT_3D('',#254645,#254646,#254647); +#254645 = CARTESIAN_POINT('',(101.519266,-42.483636,1.585)); +#254646 = DIRECTION('',(0.,0.,1.)); +#254647 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#254648 = ORIENTED_EDGE('',*,*,#254649,.T.); +#254649 = EDGE_CURVE('',#254641,#254650,#254652,.T.); +#254650 = VERTEX_POINT('',#254651); +#254651 = CARTESIAN_POINT('',(101.278555,-42.302919,1.585)); +#254652 = LINE('',#254653,#254654); +#254653 = CARTESIAN_POINT('',(101.566802,-42.302919,1.585)); +#254654 = VECTOR('',#254655,1.); +#254655 = DIRECTION('',(-1.,0.,0.)); +#254656 = ORIENTED_EDGE('',*,*,#254657,.T.); +#254657 = EDGE_CURVE('',#254650,#254658,#254660,.T.); +#254658 = VERTEX_POINT('',#254659); +#254659 = CARTESIAN_POINT('',(101.278555,-42.676728,1.585)); +#254660 = LINE('',#254661,#254662); +#254661 = CARTESIAN_POINT('',(101.278555,-42.302919,1.585)); +#254662 = VECTOR('',#254663,1.); +#254663 = DIRECTION('',(0.,-1.,0.)); +#254664 = ORIENTED_EDGE('',*,*,#254665,.T.); +#254665 = EDGE_CURVE('',#254658,#254666,#254668,.T.); +#254666 = VERTEX_POINT('',#254667); +#254667 = CARTESIAN_POINT('',(101.566802,-42.676728,1.585)); +#254668 = LINE('',#254669,#254670); +#254669 = CARTESIAN_POINT('',(101.278555,-42.676728,1.585)); +#254670 = VECTOR('',#254671,1.); +#254671 = DIRECTION('',(1.,0.,0.)); +#254672 = ORIENTED_EDGE('',*,*,#254673,.T.); +#254673 = EDGE_CURVE('',#254666,#254674,#254676,.T.); +#254674 = VERTEX_POINT('',#254675); +#254675 = CARTESIAN_POINT('',(101.699983,-42.543547,1.585)); +#254676 = CIRCLE('',#254677,0.18686440374); +#254677 = AXIS2_PLACEMENT_3D('',#254678,#254679,#254680); +#254678 = CARTESIAN_POINT('',(101.519266,-42.496011,1.585)); +#254679 = DIRECTION('',(0.,0.,1.)); +#254680 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#254681 = ORIENTED_EDGE('',*,*,#254682,.T.); +#254682 = EDGE_CURVE('',#254674,#254639,#254683,.T.); +#254683 = LINE('',#254684,#254685); +#254684 = CARTESIAN_POINT('',(101.699983,-42.543547,1.585)); +#254685 = VECTOR('',#254686,1.); +#254686 = DIRECTION('',(0.,1.,0.)); +#254687 = PLANE('',#254688); +#254688 = AXIS2_PLACEMENT_3D('',#254689,#254690,#254691); +#254689 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254690 = DIRECTION('',(0.,0.,1.)); +#254691 = DIRECTION('',(1.,0.,-0.)); +#254692 = SHELL_BASED_SURFACE_MODEL('',(#254693)); +#254693 = OPEN_SHELL('',(#254694)); +#254694 = ADVANCED_FACE('',(#254695),#254890,.T.); +#254695 = FACE_BOUND('',#254696,.F.); +#254696 = EDGE_LOOP('',(#254697,#254708,#254716,#254725,#254733,#254741, + #254749,#254757,#254766,#254774,#254783,#254791,#254799,#254807, + #254816,#254824,#254833,#254841,#254850,#254858,#254867,#254875, + #254884)); +#254697 = ORIENTED_EDGE('',*,*,#254698,.T.); +#254698 = EDGE_CURVE('',#254699,#254701,#254703,.T.); +#254699 = VERTEX_POINT('',#254700); +#254700 = CARTESIAN_POINT('',(102.131817,-42.20604,1.585)); +#254701 = VERTEX_POINT('',#254702); +#254702 = CARTESIAN_POINT('',(102.203555,-42.152919,1.585)); +#254703 = CIRCLE('',#254704,7.500336100771E-02); +#254704 = AXIS2_PLACEMENT_3D('',#254705,#254706,#254707); +#254705 = CARTESIAN_POINT('',(102.2035572707,-42.22792236097,1.585)); +#254706 = DIRECTION('',(0.,0.,-1.)); +#254707 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#254708 = ORIENTED_EDGE('',*,*,#254709,.T.); +#254709 = EDGE_CURVE('',#254701,#254710,#254712,.T.); +#254710 = VERTEX_POINT('',#254711); +#254711 = CARTESIAN_POINT('',(102.694377,-42.15436,1.585)); +#254712 = LINE('',#254713,#254714); +#254713 = CARTESIAN_POINT('',(102.203555,-42.152919,1.585)); +#254714 = VECTOR('',#254715,1.); +#254715 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#254716 = ORIENTED_EDGE('',*,*,#254717,.T.); +#254717 = EDGE_CURVE('',#254710,#254718,#254720,.T.); +#254718 = VERTEX_POINT('',#254719); +#254719 = CARTESIAN_POINT('',(102.679745,-42.302919,1.585)); +#254720 = CIRCLE('',#254721,7.500006711465E-02); +#254721 = AXIS2_PLACEMENT_3D('',#254722,#254723,#254724); +#254722 = CARTESIAN_POINT('',(102.67974506711,-42.22791893288,1.585)); +#254723 = DIRECTION('',(0.,0.,-1.)); +#254724 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254725 = ORIENTED_EDGE('',*,*,#254726,.T.); +#254726 = EDGE_CURVE('',#254718,#254727,#254729,.T.); +#254727 = VERTEX_POINT('',#254728); +#254728 = CARTESIAN_POINT('',(102.271429,-42.302919,1.585)); +#254729 = LINE('',#254730,#254731); +#254730 = CARTESIAN_POINT('',(102.679745,-42.302919,1.585)); +#254731 = VECTOR('',#254732,1.); +#254732 = DIRECTION('',(-1.,0.,0.)); +#254733 = ORIENTED_EDGE('',*,*,#254734,.T.); +#254734 = EDGE_CURVE('',#254727,#254735,#254737,.T.); +#254735 = VERTEX_POINT('',#254736); +#254736 = CARTESIAN_POINT('',(102.24661,-42.551109,1.585)); +#254737 = LINE('',#254738,#254739); +#254738 = CARTESIAN_POINT('',(102.271429,-42.302919,1.585)); +#254739 = VECTOR('',#254740,1.); +#254740 = DIRECTION('',(-9.950371902098E-02,-0.99503719021,0.)); +#254741 = ORIENTED_EDGE('',*,*,#254742,.T.); +#254742 = EDGE_CURVE('',#254735,#254743,#254745,.T.); +#254743 = VERTEX_POINT('',#254744); +#254744 = CARTESIAN_POINT('',(102.284161,-42.535312,1.585)); +#254745 = LINE('',#254746,#254747); +#254746 = CARTESIAN_POINT('',(102.24661,-42.551109,1.585)); +#254747 = VECTOR('',#254748,1.); +#254748 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#254749 = ORIENTED_EDGE('',*,*,#254750,.T.); +#254750 = EDGE_CURVE('',#254743,#254751,#254753,.T.); +#254751 = VERTEX_POINT('',#254752); +#254752 = CARTESIAN_POINT('',(102.556697,-42.536534,1.585)); +#254753 = LINE('',#254754,#254755); +#254754 = CARTESIAN_POINT('',(102.284161,-42.535312,1.585)); +#254755 = VECTOR('',#254756,1.); +#254756 = DIRECTION('',(0.99998994787,-4.483766241165E-03,0.)); +#254757 = ORIENTED_EDGE('',*,*,#254758,.T.); +#254758 = EDGE_CURVE('',#254751,#254759,#254761,.T.); +#254759 = VERTEX_POINT('',#254760); +#254760 = CARTESIAN_POINT('',(102.800923,-42.784715,1.585)); +#254761 = CIRCLE('',#254762,0.348625649748); +#254762 = AXIS2_PLACEMENT_3D('',#254763,#254764,#254765); +#254763 = CARTESIAN_POINT('',(102.46352504586,-42.87247868387,1.585)); +#254764 = DIRECTION('',(0.,0.,-1.)); +#254765 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#254766 = ORIENTED_EDGE('',*,*,#254767,.T.); +#254767 = EDGE_CURVE('',#254759,#254768,#254770,.T.); +#254768 = VERTEX_POINT('',#254769); +#254769 = CARTESIAN_POINT('',(102.799701,-43.057252,1.585)); +#254770 = LINE('',#254771,#254772); +#254771 = CARTESIAN_POINT('',(102.800923,-42.784715,1.585)); +#254772 = VECTOR('',#254773,1.); +#254773 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#254774 = ORIENTED_EDGE('',*,*,#254775,.T.); +#254775 = EDGE_CURVE('',#254768,#254776,#254778,.T.); +#254776 = VERTEX_POINT('',#254777); +#254777 = CARTESIAN_POINT('',(102.55152,-43.301478,1.585)); +#254778 = CIRCLE('',#254779,0.348635327447); +#254779 = AXIS2_PLACEMENT_3D('',#254780,#254781,#254782); +#254780 = CARTESIAN_POINT('',(102.46374848129,-42.96407208415,1.585)); +#254781 = DIRECTION('',(0.,0.,-1.)); +#254782 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#254783 = ORIENTED_EDGE('',*,*,#254784,.T.); +#254784 = EDGE_CURVE('',#254776,#254785,#254787,.T.); +#254785 = VERTEX_POINT('',#254786); +#254786 = CARTESIAN_POINT('',(102.278983,-43.300256,1.585)); +#254787 = LINE('',#254788,#254789); +#254788 = CARTESIAN_POINT('',(102.55152,-43.301478,1.585)); +#254789 = VECTOR('',#254790,1.); +#254790 = DIRECTION('',(-0.999989947943,4.483749789542E-03,0.)); +#254791 = ORIENTED_EDGE('',*,*,#254792,.T.); +#254792 = EDGE_CURVE('',#254785,#254793,#254795,.T.); +#254793 = VERTEX_POINT('',#254794); +#254794 = CARTESIAN_POINT('',(102.15627,-43.23805,1.585)); +#254795 = LINE('',#254796,#254797); +#254796 = CARTESIAN_POINT('',(102.278983,-43.300256,1.585)); +#254797 = VECTOR('',#254798,1.); +#254798 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#254799 = ORIENTED_EDGE('',*,*,#254800,.T.); +#254800 = EDGE_CURVE('',#254793,#254801,#254803,.T.); +#254801 = VERTEX_POINT('',#254802); +#254802 = CARTESIAN_POINT('',(102.093575,-43.174347,1.585)); +#254803 = LINE('',#254804,#254805); +#254804 = CARTESIAN_POINT('',(102.15627,-43.23805,1.585)); +#254805 = VECTOR('',#254806,1.); +#254806 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#254807 = ORIENTED_EDGE('',*,*,#254808,.T.); +#254808 = EDGE_CURVE('',#254801,#254809,#254811,.T.); +#254809 = VERTEX_POINT('',#254810); +#254810 = CARTESIAN_POINT('',(102.20897,-43.079648,1.585)); +#254811 = CIRCLE('',#254812,7.50001266804E-02); +#254812 = AXIS2_PLACEMENT_3D('',#254813,#254814,#254815); +#254813 = CARTESIAN_POINT('',(102.15593605199,-43.13268024831,1.585)); +#254814 = DIRECTION('',(0.,0.,-1.)); +#254815 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#254816 = ORIENTED_EDGE('',*,*,#254817,.T.); +#254817 = EDGE_CURVE('',#254809,#254818,#254820,.T.); +#254818 = VERTEX_POINT('',#254819); +#254819 = CARTESIAN_POINT('',(102.247982,-43.118661,1.585)); +#254820 = LINE('',#254821,#254822); +#254821 = CARTESIAN_POINT('',(102.20897,-43.079648,1.585)); +#254822 = VECTOR('',#254823,1.); +#254823 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#254824 = ORIENTED_EDGE('',*,*,#254825,.T.); +#254825 = EDGE_CURVE('',#254818,#254826,#254828,.T.); +#254826 = VERTEX_POINT('',#254827); +#254827 = CARTESIAN_POINT('',(102.587698,-43.118661,1.585)); +#254828 = CIRCLE('',#254829,0.305620374329); +#254829 = AXIS2_PLACEMENT_3D('',#254830,#254831,#254832); +#254830 = CARTESIAN_POINT('',(102.41784,-42.86459,1.585)); +#254831 = DIRECTION('',(0.,0.,1.)); +#254832 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#254833 = ORIENTED_EDGE('',*,*,#254834,.T.); +#254834 = EDGE_CURVE('',#254826,#254835,#254837,.T.); +#254835 = VERTEX_POINT('',#254836); +#254836 = CARTESIAN_POINT('',(102.618105,-43.088253,1.585)); +#254837 = LINE('',#254838,#254839); +#254838 = CARTESIAN_POINT('',(102.587698,-43.118661,1.585)); +#254839 = VECTOR('',#254840,1.); +#254840 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#254841 = ORIENTED_EDGE('',*,*,#254842,.T.); +#254842 = EDGE_CURVE('',#254835,#254843,#254845,.T.); +#254843 = VERTEX_POINT('',#254844); +#254844 = CARTESIAN_POINT('',(102.618106,-42.748536,1.585)); +#254845 = CIRCLE('',#254846,0.305616146029); +#254846 = AXIS2_PLACEMENT_3D('',#254847,#254848,#254849); +#254847 = CARTESIAN_POINT('',(102.36403992049,-42.91839375212,1.585)); +#254848 = DIRECTION('',(0.,-0.,1.)); +#254849 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#254850 = ORIENTED_EDGE('',*,*,#254851,.T.); +#254851 = EDGE_CURVE('',#254843,#254852,#254854,.T.); +#254852 = VERTEX_POINT('',#254853); +#254853 = CARTESIAN_POINT('',(102.587699,-42.718129,1.585)); +#254854 = LINE('',#254855,#254856); +#254855 = CARTESIAN_POINT('',(102.618106,-42.748536,1.585)); +#254856 = VECTOR('',#254857,1.); +#254857 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#254858 = ORIENTED_EDGE('',*,*,#254859,.T.); +#254859 = EDGE_CURVE('',#254852,#254860,#254862,.T.); +#254860 = VERTEX_POINT('',#254861); +#254861 = CARTESIAN_POINT('',(102.247982,-42.718129,1.585)); +#254862 = CIRCLE('',#254863,0.305621483548); +#254863 = AXIS2_PLACEMENT_3D('',#254864,#254865,#254866); +#254864 = CARTESIAN_POINT('',(102.4178405,-42.972201,1.585)); +#254865 = DIRECTION('',(0.,0.,1.)); +#254866 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#254867 = ORIENTED_EDGE('',*,*,#254868,.T.); +#254868 = EDGE_CURVE('',#254860,#254869,#254871,.T.); +#254869 = VERTEX_POINT('',#254870); +#254870 = CARTESIAN_POINT('',(102.191192,-42.770306,1.585)); +#254871 = LINE('',#254872,#254873); +#254872 = CARTESIAN_POINT('',(102.247982,-42.718129,1.585)); +#254873 = VECTOR('',#254874,1.); +#254874 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#254875 = ORIENTED_EDGE('',*,*,#254876,.T.); +#254876 = EDGE_CURVE('',#254869,#254877,#254879,.T.); +#254877 = VERTEX_POINT('',#254878); +#254878 = CARTESIAN_POINT('',(102.081286,-42.711349,1.585)); +#254879 = CIRCLE('',#254880,7.50002417247E-02); +#254880 = AXIS2_PLACEMENT_3D('',#254881,#254882,#254883); +#254881 = CARTESIAN_POINT('',(102.15593597002,-42.70410895619,1.585)); +#254882 = DIRECTION('',(-0.,0.,-1.)); +#254883 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#254884 = ORIENTED_EDGE('',*,*,#254885,.T.); +#254885 = EDGE_CURVE('',#254877,#254699,#254886,.T.); +#254886 = LINE('',#254887,#254888); +#254887 = CARTESIAN_POINT('',(102.081286,-42.711349,1.585)); +#254888 = VECTOR('',#254889,1.); +#254889 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#254890 = PLANE('',#254891); +#254891 = AXIS2_PLACEMENT_3D('',#254892,#254893,#254894); +#254892 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254893 = DIRECTION('',(0.,0.,1.)); +#254894 = DIRECTION('',(1.,0.,-0.)); +#254895 = SHELL_BASED_SURFACE_MODEL('',(#254896)); +#254896 = OPEN_SHELL('',(#254897)); +#254897 = ADVANCED_FACE('',(#254898,#254976),#255028,.T.); +#254898 = FACE_BOUND('',#254899,.F.); +#254899 = EDGE_LOOP('',(#254900,#254911,#254919,#254928,#254936,#254945, + #254953,#254961,#254970)); +#254900 = ORIENTED_EDGE('',*,*,#254901,.T.); +#254901 = EDGE_CURVE('',#254902,#254904,#254906,.T.); +#254902 = VERTEX_POINT('',#254903); +#254903 = CARTESIAN_POINT('',(117.403805,-42.213287,1.585)); +#254904 = VERTEX_POINT('',#254905); +#254905 = CARTESIAN_POINT('',(117.477364,-42.152919,1.585)); +#254906 = CIRCLE('',#254907,7.500074938982E-02); +#254907 = AXIS2_PLACEMENT_3D('',#254908,#254909,#254910); +#254908 = CARTESIAN_POINT('',(117.47736446611,-42.22791974938,1.585)); +#254909 = DIRECTION('',(0.,0.,-1.)); +#254910 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#254911 = ORIENTED_EDGE('',*,*,#254912,.T.); +#254912 = EDGE_CURVE('',#254904,#254913,#254915,.T.); +#254913 = VERTEX_POINT('',#254914); +#254914 = CARTESIAN_POINT('',(117.872948,-42.15436,1.585)); +#254915 = LINE('',#254916,#254917); +#254916 = CARTESIAN_POINT('',(117.477364,-42.152919,1.585)); +#254917 = VECTOR('',#254918,1.); +#254918 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#254919 = ORIENTED_EDGE('',*,*,#254920,.T.); +#254920 = EDGE_CURVE('',#254913,#254921,#254923,.T.); +#254921 = VERTEX_POINT('',#254922); +#254922 = CARTESIAN_POINT('',(118.122351,-42.403763,1.585)); +#254923 = CIRCLE('',#254924,0.347870264855); +#254924 = AXIS2_PLACEMENT_3D('',#254925,#254926,#254927); +#254925 = CARTESIAN_POINT('',(117.78562026502,-42.49109073497,1.585)); +#254926 = DIRECTION('',(0.,0.,-1.)); +#254927 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#254928 = ORIENTED_EDGE('',*,*,#254929,.T.); +#254929 = EDGE_CURVE('',#254921,#254930,#254932,.T.); +#254930 = VERTEX_POINT('',#254931); +#254931 = CARTESIAN_POINT('',(118.121129,-42.581062,1.585)); +#254932 = LINE('',#254933,#254934); +#254933 = CARTESIAN_POINT('',(118.122351,-42.403763,1.585)); +#254934 = VECTOR('',#254935,1.); +#254935 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#254936 = ORIENTED_EDGE('',*,*,#254937,.T.); +#254937 = EDGE_CURVE('',#254930,#254938,#254940,.T.); +#254938 = VERTEX_POINT('',#254939); +#254939 = CARTESIAN_POINT('',(117.872948,-42.825287,1.585)); +#254940 = CIRCLE('',#254941,0.348632345848); +#254941 = AXIS2_PLACEMENT_3D('',#254942,#254943,#254944); +#254942 = CARTESIAN_POINT('',(117.78517919403,-42.4878834593,1.585)); +#254943 = DIRECTION('',(0.,0.,-1.)); +#254944 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#254945 = ORIENTED_EDGE('',*,*,#254946,.T.); +#254946 = EDGE_CURVE('',#254938,#254947,#254949,.T.); +#254947 = VERTEX_POINT('',#254948); +#254948 = CARTESIAN_POINT('',(117.552364,-42.826728,1.585)); +#254949 = LINE('',#254950,#254951); +#254950 = CARTESIAN_POINT('',(117.872948,-42.825287,1.585)); +#254951 = VECTOR('',#254952,1.); +#254952 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#254953 = ORIENTED_EDGE('',*,*,#254954,.T.); +#254954 = EDGE_CURVE('',#254947,#254955,#254957,.T.); +#254955 = VERTEX_POINT('',#254956); +#254956 = CARTESIAN_POINT('',(117.550923,-43.242551,1.585)); +#254957 = LINE('',#254958,#254959); +#254958 = CARTESIAN_POINT('',(117.552364,-42.826728,1.585)); +#254959 = VECTOR('',#254960,1.); +#254960 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#254961 = ORIENTED_EDGE('',*,*,#254962,.T.); +#254962 = EDGE_CURVE('',#254955,#254963,#254965,.T.); +#254963 = VERTEX_POINT('',#254964); +#254964 = CARTESIAN_POINT('',(117.402364,-43.227919,1.585)); +#254965 = CIRCLE('',#254966,7.500006711463E-02); +#254966 = AXIS2_PLACEMENT_3D('',#254967,#254968,#254969); +#254967 = CARTESIAN_POINT('',(117.47736406711,-43.22791906711,1.585)); +#254968 = DIRECTION('',(-0.,0.,-1.)); +#254969 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#254970 = ORIENTED_EDGE('',*,*,#254971,.T.); +#254971 = EDGE_CURVE('',#254963,#254902,#254972,.T.); +#254972 = LINE('',#254973,#254974); +#254973 = CARTESIAN_POINT('',(117.402364,-43.227919,1.585)); +#254974 = VECTOR('',#254975,1.); +#254975 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#254976 = FACE_BOUND('',#254977,.F.); +#254977 = EDGE_LOOP('',(#254978,#254989,#254997,#255005,#255013,#255022) + ); +#254978 = ORIENTED_EDGE('',*,*,#254979,.T.); +#254979 = EDGE_CURVE('',#254980,#254982,#254984,.T.); +#254980 = VERTEX_POINT('',#254981); +#254981 = CARTESIAN_POINT('',(117.973792,-42.4361,1.585)); +#254982 = VERTEX_POINT('',#254983); +#254983 = CARTESIAN_POINT('',(117.840611,-42.302919,1.585)); +#254984 = CIRCLE('',#254985,0.18686440374); +#254985 = AXIS2_PLACEMENT_3D('',#254986,#254987,#254988); +#254986 = CARTESIAN_POINT('',(117.793075,-42.483636,1.585)); +#254987 = DIRECTION('',(0.,0.,1.)); +#254988 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#254989 = ORIENTED_EDGE('',*,*,#254990,.T.); +#254990 = EDGE_CURVE('',#254982,#254991,#254993,.T.); +#254991 = VERTEX_POINT('',#254992); +#254992 = CARTESIAN_POINT('',(117.552364,-42.302919,1.585)); +#254993 = LINE('',#254994,#254995); +#254994 = CARTESIAN_POINT('',(117.840611,-42.302919,1.585)); +#254995 = VECTOR('',#254996,1.); +#254996 = DIRECTION('',(-1.,0.,0.)); +#254997 = ORIENTED_EDGE('',*,*,#254998,.T.); +#254998 = EDGE_CURVE('',#254991,#254999,#255001,.T.); +#254999 = VERTEX_POINT('',#255000); +#255000 = CARTESIAN_POINT('',(117.552364,-42.676728,1.585)); +#255001 = LINE('',#255002,#255003); +#255002 = CARTESIAN_POINT('',(117.552364,-42.302919,1.585)); +#255003 = VECTOR('',#255004,1.); +#255004 = DIRECTION('',(0.,-1.,0.)); +#255005 = ORIENTED_EDGE('',*,*,#255006,.T.); +#255006 = EDGE_CURVE('',#254999,#255007,#255009,.T.); +#255007 = VERTEX_POINT('',#255008); +#255008 = CARTESIAN_POINT('',(117.840611,-42.676728,1.585)); +#255009 = LINE('',#255010,#255011); +#255010 = CARTESIAN_POINT('',(117.552364,-42.676728,1.585)); +#255011 = VECTOR('',#255012,1.); +#255012 = DIRECTION('',(1.,0.,0.)); +#255013 = ORIENTED_EDGE('',*,*,#255014,.T.); +#255014 = EDGE_CURVE('',#255007,#255015,#255017,.T.); +#255015 = VERTEX_POINT('',#255016); +#255016 = CARTESIAN_POINT('',(117.973792,-42.543547,1.585)); +#255017 = CIRCLE('',#255018,0.18686440374); +#255018 = AXIS2_PLACEMENT_3D('',#255019,#255020,#255021); +#255019 = CARTESIAN_POINT('',(117.793075,-42.496011,1.585)); +#255020 = DIRECTION('',(0.,0.,1.)); +#255021 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#255022 = ORIENTED_EDGE('',*,*,#255023,.T.); +#255023 = EDGE_CURVE('',#255015,#254980,#255024,.T.); +#255024 = LINE('',#255025,#255026); +#255025 = CARTESIAN_POINT('',(117.973792,-42.543547,1.585)); +#255026 = VECTOR('',#255027,1.); +#255027 = DIRECTION('',(0.,1.,0.)); +#255028 = PLANE('',#255029); +#255029 = AXIS2_PLACEMENT_3D('',#255030,#255031,#255032); +#255030 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255031 = DIRECTION('',(0.,0.,1.)); +#255032 = DIRECTION('',(1.,0.,-0.)); +#255033 = SHELL_BASED_SURFACE_MODEL('',(#255034)); +#255034 = OPEN_SHELL('',(#255035)); +#255035 = ADVANCED_FACE('',(#255036),#255222,.T.); +#255036 = FACE_BOUND('',#255037,.F.); +#255037 = EDGE_LOOP('',(#255038,#255049,#255057,#255066,#255074,#255082, + #255091,#255099,#255108,#255116,#255124,#255132,#255141,#255149, + #255158,#255166,#255175,#255183,#255191,#255199,#255208,#255216)); +#255038 = ORIENTED_EDGE('',*,*,#255039,.T.); +#255039 = EDGE_CURVE('',#255040,#255042,#255044,.T.); +#255040 = VERTEX_POINT('',#255041); +#255041 = CARTESIAN_POINT('',(119.319875,-42.301478,1.585)); +#255042 = VERTEX_POINT('',#255043); +#255043 = CARTESIAN_POINT('',(119.334507,-42.152919,1.585)); +#255044 = CIRCLE('',#255045,7.500006711465E-02); +#255045 = AXIS2_PLACEMENT_3D('',#255046,#255047,#255048); +#255046 = CARTESIAN_POINT('',(119.33450693288,-42.22791906711,1.585)); +#255047 = DIRECTION('',(0.,0.,-1.)); +#255048 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#255049 = ORIENTED_EDGE('',*,*,#255050,.T.); +#255050 = EDGE_CURVE('',#255042,#255051,#255053,.T.); +#255051 = VERTEX_POINT('',#255052); +#255052 = CARTESIAN_POINT('',(119.961292,-42.153681,1.585)); +#255053 = LINE('',#255054,#255055); +#255054 = CARTESIAN_POINT('',(119.334507,-42.152919,1.585)); +#255055 = VECTOR('',#255056,1.); +#255056 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#255057 = ORIENTED_EDGE('',*,*,#255058,.T.); +#255058 = EDGE_CURVE('',#255051,#255059,#255061,.T.); +#255059 = VERTEX_POINT('',#255060); +#255060 = CARTESIAN_POINT('',(120.027113,-42.242551,1.585)); +#255061 = CIRCLE('',#255062,7.447391611625E-02); +#255062 = AXIS2_PLACEMENT_3D('',#255063,#255064,#255065); +#255063 = CARTESIAN_POINT('',(119.95411292664,-42.2278080874,1.585)); +#255064 = DIRECTION('',(0.,0.,-1.)); +#255065 = DIRECTION('',(9.639715124795E-02,0.995342950561,0.)); +#255066 = ORIENTED_EDGE('',*,*,#255067,.T.); +#255067 = EDGE_CURVE('',#255059,#255068,#255070,.T.); +#255068 = VERTEX_POINT('',#255069); +#255069 = CARTESIAN_POINT('',(120.009997,-42.277307,1.585)); +#255070 = LINE('',#255071,#255072); +#255071 = CARTESIAN_POINT('',(120.027113,-42.242551,1.585)); +#255072 = VECTOR('',#255073,1.); +#255073 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#255074 = ORIENTED_EDGE('',*,*,#255075,.T.); +#255075 = EDGE_CURVE('',#255068,#255076,#255078,.T.); +#255076 = VERTEX_POINT('',#255077); +#255077 = CARTESIAN_POINT('',(119.783101,-42.536616,1.585)); +#255078 = LINE('',#255079,#255080); +#255079 = CARTESIAN_POINT('',(120.009997,-42.277307,1.585)); +#255080 = VECTOR('',#255081,1.); +#255081 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#255082 = ORIENTED_EDGE('',*,*,#255083,.T.); +#255083 = EDGE_CURVE('',#255076,#255084,#255086,.T.); +#255084 = VERTEX_POINT('',#255085); +#255085 = CARTESIAN_POINT('',(120.027113,-42.784715,1.585)); +#255086 = CIRCLE('',#255087,0.348520834816); +#255087 = AXIS2_PLACEMENT_3D('',#255088,#255089,#255090); +#255088 = CARTESIAN_POINT('',(119.6898076174,-42.87241819931,1.585)); +#255089 = DIRECTION('',(0.,0.,-1.)); +#255090 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#255091 = ORIENTED_EDGE('',*,*,#255092,.T.); +#255092 = EDGE_CURVE('',#255084,#255093,#255095,.T.); +#255093 = VERTEX_POINT('',#255094); +#255094 = CARTESIAN_POINT('',(120.025891,-43.057252,1.585)); +#255095 = LINE('',#255096,#255097); +#255096 = CARTESIAN_POINT('',(120.027113,-42.784715,1.585)); +#255097 = VECTOR('',#255098,1.); +#255098 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#255099 = ORIENTED_EDGE('',*,*,#255100,.T.); +#255100 = EDGE_CURVE('',#255093,#255101,#255103,.T.); +#255101 = VERTEX_POINT('',#255102); +#255102 = CARTESIAN_POINT('',(119.77771,-43.301478,1.585)); +#255103 = CIRCLE('',#255104,0.348635327447); +#255104 = AXIS2_PLACEMENT_3D('',#255105,#255106,#255107); +#255105 = CARTESIAN_POINT('',(119.68993848129,-42.96407208415,1.585)); +#255106 = DIRECTION('',(0.,0.,-1.)); +#255107 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#255108 = ORIENTED_EDGE('',*,*,#255109,.T.); +#255109 = EDGE_CURVE('',#255101,#255110,#255112,.T.); +#255110 = VERTEX_POINT('',#255111); +#255111 = CARTESIAN_POINT('',(119.457554,-43.300256,1.585)); +#255112 = LINE('',#255113,#255114); +#255113 = CARTESIAN_POINT('',(119.77771,-43.301478,1.585)); +#255114 = VECTOR('',#255115,1.); +#255115 = DIRECTION('',(-0.999992715758,3.816861463354E-03,0.)); +#255116 = ORIENTED_EDGE('',*,*,#255117,.T.); +#255117 = EDGE_CURVE('',#255110,#255118,#255120,.T.); +#255118 = VERTEX_POINT('',#255119); +#255119 = CARTESIAN_POINT('',(119.334841,-43.23805,1.585)); +#255120 = LINE('',#255121,#255122); +#255121 = CARTESIAN_POINT('',(119.457554,-43.300256,1.585)); +#255122 = VECTOR('',#255123,1.); +#255123 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#255124 = ORIENTED_EDGE('',*,*,#255125,.T.); +#255125 = EDGE_CURVE('',#255118,#255126,#255128,.T.); +#255126 = VERTEX_POINT('',#255127); +#255127 = CARTESIAN_POINT('',(119.272146,-43.174347,1.585)); +#255128 = LINE('',#255129,#255130); +#255129 = CARTESIAN_POINT('',(119.334841,-43.23805,1.585)); +#255130 = VECTOR('',#255131,1.); +#255131 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#255132 = ORIENTED_EDGE('',*,*,#255133,.T.); +#255133 = EDGE_CURVE('',#255126,#255134,#255136,.T.); +#255134 = VERTEX_POINT('',#255135); +#255135 = CARTESIAN_POINT('',(119.387541,-43.079648,1.585)); +#255136 = CIRCLE('',#255137,7.50001266804E-02); +#255137 = AXIS2_PLACEMENT_3D('',#255138,#255139,#255140); +#255138 = CARTESIAN_POINT('',(119.33450705199,-43.13268024831,1.585)); +#255139 = DIRECTION('',(0.,0.,-1.)); +#255140 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#255141 = ORIENTED_EDGE('',*,*,#255142,.T.); +#255142 = EDGE_CURVE('',#255134,#255143,#255145,.T.); +#255143 = VERTEX_POINT('',#255144); +#255144 = CARTESIAN_POINT('',(119.426553,-43.118661,1.585)); +#255145 = LINE('',#255146,#255147); +#255146 = CARTESIAN_POINT('',(119.387541,-43.079648,1.585)); +#255147 = VECTOR('',#255148,1.); +#255148 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#255149 = ORIENTED_EDGE('',*,*,#255150,.T.); +#255150 = EDGE_CURVE('',#255143,#255151,#255153,.T.); +#255151 = VERTEX_POINT('',#255152); +#255152 = CARTESIAN_POINT('',(119.813888,-43.118661,1.585)); +#255153 = CIRCLE('',#255154,0.358502380266); +#255154 = AXIS2_PLACEMENT_3D('',#255155,#255156,#255157); +#255155 = CARTESIAN_POINT('',(119.6202205,-42.816971,1.585)); +#255156 = DIRECTION('',(0.,0.,1.)); +#255157 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#255158 = ORIENTED_EDGE('',*,*,#255159,.T.); +#255159 = EDGE_CURVE('',#255151,#255160,#255162,.T.); +#255160 = VERTEX_POINT('',#255161); +#255161 = CARTESIAN_POINT('',(119.844295,-43.088253,1.585)); +#255162 = LINE('',#255163,#255164); +#255163 = CARTESIAN_POINT('',(119.813888,-43.118661,1.585)); +#255164 = VECTOR('',#255165,1.); +#255165 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#255166 = ORIENTED_EDGE('',*,*,#255167,.T.); +#255167 = EDGE_CURVE('',#255160,#255168,#255170,.T.); +#255168 = VERTEX_POINT('',#255169); +#255169 = CARTESIAN_POINT('',(119.844296,-42.748536,1.585)); +#255170 = CIRCLE('',#255171,0.305616146029); +#255171 = AXIS2_PLACEMENT_3D('',#255172,#255173,#255174); +#255172 = CARTESIAN_POINT('',(119.59022992049,-42.91839375212,1.585)); +#255173 = DIRECTION('',(0.,-0.,1.)); +#255174 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#255175 = ORIENTED_EDGE('',*,*,#255176,.T.); +#255176 = EDGE_CURVE('',#255168,#255177,#255179,.T.); +#255177 = VERTEX_POINT('',#255178); +#255178 = CARTESIAN_POINT('',(119.813889,-42.718129,1.585)); +#255179 = LINE('',#255180,#255181); +#255180 = CARTESIAN_POINT('',(119.844296,-42.748536,1.585)); +#255181 = VECTOR('',#255182,1.); +#255182 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#255183 = ORIENTED_EDGE('',*,*,#255184,.T.); +#255184 = EDGE_CURVE('',#255177,#255185,#255187,.T.); +#255185 = VERTEX_POINT('',#255186); +#255186 = CARTESIAN_POINT('',(119.745373,-42.683871,1.585)); +#255187 = LINE('',#255188,#255189); +#255188 = CARTESIAN_POINT('',(119.813889,-42.718129,1.585)); +#255189 = VECTOR('',#255190,1.); +#255190 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#255191 = ORIENTED_EDGE('',*,*,#255192,.T.); +#255192 = EDGE_CURVE('',#255185,#255193,#255195,.T.); +#255193 = VERTEX_POINT('',#255194); +#255194 = CARTESIAN_POINT('',(119.605589,-42.68243,1.585)); +#255195 = LINE('',#255196,#255197); +#255196 = CARTESIAN_POINT('',(119.745373,-42.683871,1.585)); +#255197 = VECTOR('',#255198,1.); +#255198 = DIRECTION('',(-0.999946868947,1.030821437474E-02,0.)); +#255199 = ORIENTED_EDGE('',*,*,#255200,.T.); +#255200 = EDGE_CURVE('',#255193,#255201,#255203,.T.); +#255201 = VERTEX_POINT('',#255202); +#255202 = CARTESIAN_POINT('',(119.563778,-42.559483,1.585)); +#255203 = CIRCLE('',#255204,7.500015628755E-02); +#255204 = AXIS2_PLACEMENT_3D('',#255205,#255206,#255207); +#255205 = CARTESIAN_POINT('',(119.62022128432,-42.6088710461,1.585)); +#255206 = DIRECTION('',(0.,0.,-1.)); +#255207 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#255208 = ORIENTED_EDGE('',*,*,#255209,.T.); +#255209 = EDGE_CURVE('',#255201,#255210,#255212,.T.); +#255210 = VERTEX_POINT('',#255211); +#255211 = CARTESIAN_POINT('',(119.788272,-42.302919,1.585)); +#255212 = LINE('',#255213,#255214); +#255213 = CARTESIAN_POINT('',(119.563778,-42.559483,1.585)); +#255214 = VECTOR('',#255215,1.); +#255215 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#255216 = ORIENTED_EDGE('',*,*,#255217,.T.); +#255217 = EDGE_CURVE('',#255210,#255040,#255218,.T.); +#255218 = LINE('',#255219,#255220); +#255219 = CARTESIAN_POINT('',(119.788272,-42.302919,1.585)); +#255220 = VECTOR('',#255221,1.); +#255221 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#255222 = PLANE('',#255223); +#255223 = AXIS2_PLACEMENT_3D('',#255224,#255225,#255226); +#255224 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255225 = DIRECTION('',(0.,0.,1.)); +#255226 = DIRECTION('',(1.,0.,-0.)); +#255227 = SHELL_BASED_SURFACE_MODEL('',(#255228)); +#255228 = OPEN_SHELL('',(#255229)); +#255229 = ADVANCED_FACE('',(#255230,#255308),#255360,.T.); +#255230 = FACE_BOUND('',#255231,.F.); +#255231 = EDGE_LOOP('',(#255232,#255243,#255251,#255260,#255268,#255277, + #255285,#255293,#255302)); +#255232 = ORIENTED_EDGE('',*,*,#255233,.T.); +#255233 = EDGE_CURVE('',#255234,#255236,#255238,.T.); +#255234 = VERTEX_POINT('',#255235); +#255235 = CARTESIAN_POINT('',(127.629996,-42.213287,1.585)); +#255236 = VERTEX_POINT('',#255237); +#255237 = CARTESIAN_POINT('',(127.703555,-42.152919,1.585)); +#255238 = CIRCLE('',#255239,7.500074938982E-02); +#255239 = AXIS2_PLACEMENT_3D('',#255240,#255241,#255242); +#255240 = CARTESIAN_POINT('',(127.70355546611,-42.22791974938,1.585)); +#255241 = DIRECTION('',(0.,0.,-1.)); +#255242 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#255243 = ORIENTED_EDGE('',*,*,#255244,.T.); +#255244 = EDGE_CURVE('',#255236,#255245,#255247,.T.); +#255245 = VERTEX_POINT('',#255246); +#255246 = CARTESIAN_POINT('',(128.099139,-42.15436,1.585)); +#255247 = LINE('',#255248,#255249); +#255248 = CARTESIAN_POINT('',(127.703555,-42.152919,1.585)); +#255249 = VECTOR('',#255250,1.); +#255250 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#255251 = ORIENTED_EDGE('',*,*,#255252,.T.); +#255252 = EDGE_CURVE('',#255245,#255253,#255255,.T.); +#255253 = VERTEX_POINT('',#255254); +#255254 = CARTESIAN_POINT('',(128.348542,-42.403763,1.585)); +#255255 = CIRCLE('',#255256,0.347870264855); +#255256 = AXIS2_PLACEMENT_3D('',#255257,#255258,#255259); +#255257 = CARTESIAN_POINT('',(128.01181126502,-42.49109073497,1.585)); +#255258 = DIRECTION('',(0.,0.,-1.)); +#255259 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#255260 = ORIENTED_EDGE('',*,*,#255261,.T.); +#255261 = EDGE_CURVE('',#255253,#255262,#255264,.T.); +#255262 = VERTEX_POINT('',#255263); +#255263 = CARTESIAN_POINT('',(128.34732,-42.581062,1.585)); +#255264 = LINE('',#255265,#255266); +#255265 = CARTESIAN_POINT('',(128.348542,-42.403763,1.585)); +#255266 = VECTOR('',#255267,1.); +#255267 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#255268 = ORIENTED_EDGE('',*,*,#255269,.T.); +#255269 = EDGE_CURVE('',#255262,#255270,#255272,.T.); +#255270 = VERTEX_POINT('',#255271); +#255271 = CARTESIAN_POINT('',(128.099139,-42.825287,1.585)); +#255272 = CIRCLE('',#255273,0.348632345849); +#255273 = AXIS2_PLACEMENT_3D('',#255274,#255275,#255276); +#255274 = CARTESIAN_POINT('',(128.01137019403,-42.4878834593,1.585)); +#255275 = DIRECTION('',(0.,0.,-1.)); +#255276 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#255277 = ORIENTED_EDGE('',*,*,#255278,.T.); +#255278 = EDGE_CURVE('',#255270,#255279,#255281,.T.); +#255279 = VERTEX_POINT('',#255280); +#255280 = CARTESIAN_POINT('',(127.778555,-42.826728,1.585)); +#255281 = LINE('',#255282,#255283); +#255282 = CARTESIAN_POINT('',(128.099139,-42.825287,1.585)); +#255283 = VECTOR('',#255284,1.); +#255284 = DIRECTION('',(-0.999989897992,-4.494876360038E-03,0.)); +#255285 = ORIENTED_EDGE('',*,*,#255286,.T.); +#255286 = EDGE_CURVE('',#255279,#255287,#255289,.T.); +#255287 = VERTEX_POINT('',#255288); +#255288 = CARTESIAN_POINT('',(127.777114,-43.242551,1.585)); +#255289 = LINE('',#255290,#255291); +#255290 = CARTESIAN_POINT('',(127.778555,-42.826728,1.585)); +#255291 = VECTOR('',#255292,1.); +#255292 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#255293 = ORIENTED_EDGE('',*,*,#255294,.T.); +#255294 = EDGE_CURVE('',#255287,#255295,#255297,.T.); +#255295 = VERTEX_POINT('',#255296); +#255296 = CARTESIAN_POINT('',(127.628555,-43.227919,1.585)); +#255297 = CIRCLE('',#255298,7.500006711463E-02); +#255298 = AXIS2_PLACEMENT_3D('',#255299,#255300,#255301); +#255299 = CARTESIAN_POINT('',(127.70355506711,-43.22791906711,1.585)); +#255300 = DIRECTION('',(-0.,0.,-1.)); +#255301 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#255302 = ORIENTED_EDGE('',*,*,#255303,.T.); +#255303 = EDGE_CURVE('',#255295,#255234,#255304,.T.); +#255304 = LINE('',#255305,#255306); +#255305 = CARTESIAN_POINT('',(127.628555,-43.227919,1.585)); +#255306 = VECTOR('',#255307,1.); +#255307 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#255308 = FACE_BOUND('',#255309,.F.); +#255309 = EDGE_LOOP('',(#255310,#255321,#255329,#255337,#255345,#255354) + ); +#255310 = ORIENTED_EDGE('',*,*,#255311,.T.); +#255311 = EDGE_CURVE('',#255312,#255314,#255316,.T.); +#255312 = VERTEX_POINT('',#255313); +#255313 = CARTESIAN_POINT('',(128.199983,-42.4361,1.585)); +#255314 = VERTEX_POINT('',#255315); +#255315 = CARTESIAN_POINT('',(128.066802,-42.302919,1.585)); +#255316 = CIRCLE('',#255317,0.18686440374); +#255317 = AXIS2_PLACEMENT_3D('',#255318,#255319,#255320); +#255318 = CARTESIAN_POINT('',(128.019266,-42.483636,1.585)); +#255319 = DIRECTION('',(0.,0.,1.)); +#255320 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#255321 = ORIENTED_EDGE('',*,*,#255322,.T.); +#255322 = EDGE_CURVE('',#255314,#255323,#255325,.T.); +#255323 = VERTEX_POINT('',#255324); +#255324 = CARTESIAN_POINT('',(127.778555,-42.302919,1.585)); +#255325 = LINE('',#255326,#255327); +#255326 = CARTESIAN_POINT('',(128.066802,-42.302919,1.585)); +#255327 = VECTOR('',#255328,1.); +#255328 = DIRECTION('',(-1.,0.,0.)); +#255329 = ORIENTED_EDGE('',*,*,#255330,.T.); +#255330 = EDGE_CURVE('',#255323,#255331,#255333,.T.); +#255331 = VERTEX_POINT('',#255332); +#255332 = CARTESIAN_POINT('',(127.778555,-42.676728,1.585)); +#255333 = LINE('',#255334,#255335); +#255334 = CARTESIAN_POINT('',(127.778555,-42.302919,1.585)); +#255335 = VECTOR('',#255336,1.); +#255336 = DIRECTION('',(0.,-1.,0.)); +#255337 = ORIENTED_EDGE('',*,*,#255338,.T.); +#255338 = EDGE_CURVE('',#255331,#255339,#255341,.T.); +#255339 = VERTEX_POINT('',#255340); +#255340 = CARTESIAN_POINT('',(128.066802,-42.676728,1.585)); +#255341 = LINE('',#255342,#255343); +#255342 = CARTESIAN_POINT('',(127.778555,-42.676728,1.585)); +#255343 = VECTOR('',#255344,1.); +#255344 = DIRECTION('',(1.,0.,0.)); +#255345 = ORIENTED_EDGE('',*,*,#255346,.T.); +#255346 = EDGE_CURVE('',#255339,#255347,#255349,.T.); +#255347 = VERTEX_POINT('',#255348); +#255348 = CARTESIAN_POINT('',(128.199983,-42.543547,1.585)); +#255349 = CIRCLE('',#255350,0.18686440374); +#255350 = AXIS2_PLACEMENT_3D('',#255351,#255352,#255353); +#255351 = CARTESIAN_POINT('',(128.019266,-42.496011,1.585)); +#255352 = DIRECTION('',(0.,0.,1.)); +#255353 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#255354 = ORIENTED_EDGE('',*,*,#255355,.T.); +#255355 = EDGE_CURVE('',#255347,#255312,#255356,.T.); +#255356 = LINE('',#255357,#255358); +#255357 = CARTESIAN_POINT('',(128.199983,-42.543547,1.585)); +#255358 = VECTOR('',#255359,1.); +#255359 = DIRECTION('',(0.,1.,0.)); +#255360 = PLANE('',#255361); +#255361 = AXIS2_PLACEMENT_3D('',#255362,#255363,#255364); +#255362 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255363 = DIRECTION('',(0.,0.,1.)); +#255364 = DIRECTION('',(1.,0.,-0.)); +#255365 = SHELL_BASED_SURFACE_MODEL('',(#255366)); +#255366 = OPEN_SHELL('',(#255367)); +#255367 = ADVANCED_FACE('',(#255368,#255446),#255498,.T.); +#255368 = FACE_BOUND('',#255369,.F.); +#255369 = EDGE_LOOP('',(#255370,#255381,#255389,#255398,#255406,#255415, + #255423,#255431,#255440)); +#255370 = ORIENTED_EDGE('',*,*,#255371,.T.); +#255371 = EDGE_CURVE('',#255372,#255374,#255376,.T.); +#255372 = VERTEX_POINT('',#255373); +#255373 = CARTESIAN_POINT('',(135.753805,-42.213287,1.585)); +#255374 = VERTEX_POINT('',#255375); +#255375 = CARTESIAN_POINT('',(135.827364,-42.152919,1.585)); +#255376 = CIRCLE('',#255377,7.500074938986E-02); +#255377 = AXIS2_PLACEMENT_3D('',#255378,#255379,#255380); +#255378 = CARTESIAN_POINT('',(135.82736446611,-42.22791974938,1.585)); +#255379 = DIRECTION('',(0.,0.,-1.)); +#255380 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#255381 = ORIENTED_EDGE('',*,*,#255382,.T.); +#255382 = EDGE_CURVE('',#255374,#255383,#255385,.T.); +#255383 = VERTEX_POINT('',#255384); +#255384 = CARTESIAN_POINT('',(136.222948,-42.15436,1.585)); +#255385 = LINE('',#255386,#255387); +#255386 = CARTESIAN_POINT('',(135.827364,-42.152919,1.585)); +#255387 = VECTOR('',#255388,1.); +#255388 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#255389 = ORIENTED_EDGE('',*,*,#255390,.T.); +#255390 = EDGE_CURVE('',#255383,#255391,#255393,.T.); +#255391 = VERTEX_POINT('',#255392); +#255392 = CARTESIAN_POINT('',(136.472351,-42.403763,1.585)); +#255393 = CIRCLE('',#255394,0.347870264855); +#255394 = AXIS2_PLACEMENT_3D('',#255395,#255396,#255397); +#255395 = CARTESIAN_POINT('',(136.13562026502,-42.49109073497,1.585)); +#255396 = DIRECTION('',(0.,0.,-1.)); +#255397 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#255398 = ORIENTED_EDGE('',*,*,#255399,.T.); +#255399 = EDGE_CURVE('',#255391,#255400,#255402,.T.); +#255400 = VERTEX_POINT('',#255401); +#255401 = CARTESIAN_POINT('',(136.471129,-42.581062,1.585)); +#255402 = LINE('',#255403,#255404); +#255403 = CARTESIAN_POINT('',(136.472351,-42.403763,1.585)); +#255404 = VECTOR('',#255405,1.); +#255405 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#255406 = ORIENTED_EDGE('',*,*,#255407,.T.); +#255407 = EDGE_CURVE('',#255400,#255408,#255410,.T.); +#255408 = VERTEX_POINT('',#255409); +#255409 = CARTESIAN_POINT('',(136.222948,-42.825287,1.585)); +#255410 = CIRCLE('',#255411,0.348632345848); +#255411 = AXIS2_PLACEMENT_3D('',#255412,#255413,#255414); +#255412 = CARTESIAN_POINT('',(136.13517919403,-42.4878834593,1.585)); +#255413 = DIRECTION('',(0.,0.,-1.)); +#255414 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#255415 = ORIENTED_EDGE('',*,*,#255416,.T.); +#255416 = EDGE_CURVE('',#255408,#255417,#255419,.T.); +#255417 = VERTEX_POINT('',#255418); +#255418 = CARTESIAN_POINT('',(135.902364,-42.826728,1.585)); +#255419 = LINE('',#255420,#255421); +#255420 = CARTESIAN_POINT('',(136.222948,-42.825287,1.585)); +#255421 = VECTOR('',#255422,1.); +#255422 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#255423 = ORIENTED_EDGE('',*,*,#255424,.T.); +#255424 = EDGE_CURVE('',#255417,#255425,#255427,.T.); +#255425 = VERTEX_POINT('',#255426); +#255426 = CARTESIAN_POINT('',(135.900923,-43.242551,1.585)); +#255427 = LINE('',#255428,#255429); +#255428 = CARTESIAN_POINT('',(135.902364,-42.826728,1.585)); +#255429 = VECTOR('',#255430,1.); +#255430 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#255431 = ORIENTED_EDGE('',*,*,#255432,.T.); +#255432 = EDGE_CURVE('',#255425,#255433,#255435,.T.); +#255433 = VERTEX_POINT('',#255434); +#255434 = CARTESIAN_POINT('',(135.752364,-43.227919,1.585)); +#255435 = CIRCLE('',#255436,7.500006711464E-02); +#255436 = AXIS2_PLACEMENT_3D('',#255437,#255438,#255439); +#255437 = CARTESIAN_POINT('',(135.82736406711,-43.22791906711,1.585)); +#255438 = DIRECTION('',(-0.,0.,-1.)); +#255439 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#255440 = ORIENTED_EDGE('',*,*,#255441,.T.); +#255441 = EDGE_CURVE('',#255433,#255372,#255442,.T.); +#255442 = LINE('',#255443,#255444); +#255443 = CARTESIAN_POINT('',(135.752364,-43.227919,1.585)); +#255444 = VECTOR('',#255445,1.); +#255445 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#255446 = FACE_BOUND('',#255447,.F.); +#255447 = EDGE_LOOP('',(#255448,#255459,#255467,#255475,#255483,#255492) + ); +#255448 = ORIENTED_EDGE('',*,*,#255449,.T.); +#255449 = EDGE_CURVE('',#255450,#255452,#255454,.T.); +#255450 = VERTEX_POINT('',#255451); +#255451 = CARTESIAN_POINT('',(136.323792,-42.4361,1.585)); +#255452 = VERTEX_POINT('',#255453); +#255453 = CARTESIAN_POINT('',(136.190611,-42.302919,1.585)); +#255454 = CIRCLE('',#255455,0.18686440374); +#255455 = AXIS2_PLACEMENT_3D('',#255456,#255457,#255458); +#255456 = CARTESIAN_POINT('',(136.143075,-42.483636,1.585)); +#255457 = DIRECTION('',(0.,0.,1.)); +#255458 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#255459 = ORIENTED_EDGE('',*,*,#255460,.T.); +#255460 = EDGE_CURVE('',#255452,#255461,#255463,.T.); +#255461 = VERTEX_POINT('',#255462); +#255462 = CARTESIAN_POINT('',(135.902364,-42.302919,1.585)); +#255463 = LINE('',#255464,#255465); +#255464 = CARTESIAN_POINT('',(136.190611,-42.302919,1.585)); +#255465 = VECTOR('',#255466,1.); +#255466 = DIRECTION('',(-1.,0.,0.)); +#255467 = ORIENTED_EDGE('',*,*,#255468,.T.); +#255468 = EDGE_CURVE('',#255461,#255469,#255471,.T.); +#255469 = VERTEX_POINT('',#255470); +#255470 = CARTESIAN_POINT('',(135.902364,-42.676728,1.585)); +#255471 = LINE('',#255472,#255473); +#255472 = CARTESIAN_POINT('',(135.902364,-42.302919,1.585)); +#255473 = VECTOR('',#255474,1.); +#255474 = DIRECTION('',(0.,-1.,0.)); +#255475 = ORIENTED_EDGE('',*,*,#255476,.T.); +#255476 = EDGE_CURVE('',#255469,#255477,#255479,.T.); +#255477 = VERTEX_POINT('',#255478); +#255478 = CARTESIAN_POINT('',(136.190611,-42.676728,1.585)); +#255479 = LINE('',#255480,#255481); +#255480 = CARTESIAN_POINT('',(135.902364,-42.676728,1.585)); +#255481 = VECTOR('',#255482,1.); +#255482 = DIRECTION('',(1.,0.,0.)); +#255483 = ORIENTED_EDGE('',*,*,#255484,.T.); +#255484 = EDGE_CURVE('',#255477,#255485,#255487,.T.); +#255485 = VERTEX_POINT('',#255486); +#255486 = CARTESIAN_POINT('',(136.323792,-42.543547,1.585)); +#255487 = CIRCLE('',#255488,0.18686440374); +#255488 = AXIS2_PLACEMENT_3D('',#255489,#255490,#255491); +#255489 = CARTESIAN_POINT('',(136.143075,-42.496011,1.585)); +#255490 = DIRECTION('',(0.,0.,1.)); +#255491 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#255492 = ORIENTED_EDGE('',*,*,#255493,.T.); +#255493 = EDGE_CURVE('',#255485,#255450,#255494,.T.); +#255494 = LINE('',#255495,#255496); +#255495 = CARTESIAN_POINT('',(136.323792,-42.543547,1.585)); +#255496 = VECTOR('',#255497,1.); +#255497 = DIRECTION('',(0.,1.,0.)); +#255498 = PLANE('',#255499); +#255499 = AXIS2_PLACEMENT_3D('',#255500,#255501,#255502); +#255500 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255501 = DIRECTION('',(0.,0.,1.)); +#255502 = DIRECTION('',(1.,0.,-0.)); +#255503 = SHELL_BASED_SURFACE_MODEL('',(#255504)); +#255504 = OPEN_SHELL('',(#255505)); +#255505 = ADVANCED_FACE('',(#255506),#255640,.T.); +#255506 = FACE_BOUND('',#255507,.F.); +#255507 = EDGE_LOOP('',(#255508,#255518,#255526,#255535,#255543,#255551, + #255560,#255568,#255577,#255585,#255593,#255601,#255609,#255618, + #255626,#255634)); +#255508 = ORIENTED_EDGE('',*,*,#255509,.T.); +#255509 = EDGE_CURVE('',#255510,#255512,#255514,.T.); +#255510 = VERTEX_POINT('',#255511); +#255511 = CARTESIAN_POINT('',(195.201062,-42.074941,1.585)); +#255512 = VERTEX_POINT('',#255513); +#255513 = CARTESIAN_POINT('',(195.239518,-42.05436,1.585)); +#255514 = LINE('',#255515,#255516); +#255515 = CARTESIAN_POINT('',(195.201062,-42.074941,1.585)); +#255516 = VECTOR('',#255517,1.); +#255517 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#255518 = ORIENTED_EDGE('',*,*,#255519,.T.); +#255519 = EDGE_CURVE('',#255512,#255520,#255522,.T.); +#255520 = VERTEX_POINT('',#255521); +#255521 = CARTESIAN_POINT('',(195.261355,-42.05436,1.585)); +#255522 = LINE('',#255523,#255524); +#255523 = CARTESIAN_POINT('',(195.239518,-42.05436,1.585)); +#255524 = VECTOR('',#255525,1.); +#255525 = DIRECTION('',(1.,0.,0.)); +#255526 = ORIENTED_EDGE('',*,*,#255527,.T.); +#255527 = EDGE_CURVE('',#255520,#255528,#255530,.T.); +#255528 = VERTEX_POINT('',#255529); +#255529 = CARTESIAN_POINT('',(195.32915,-42.127919,1.585)); +#255530 = CIRCLE('',#255531,7.216898094224E-02); +#255531 = AXIS2_PLACEMENT_3D('',#255532,#255533,#255534); +#255532 = CARTESIAN_POINT('',(195.25699706389,-42.12639728342,1.585)); +#255533 = DIRECTION('',(0.,0.,-1.)); +#255534 = DIRECTION('',(6.038516895228E-02,0.998175150648,0.)); +#255535 = ORIENTED_EDGE('',*,*,#255536,.T.); +#255536 = EDGE_CURVE('',#255528,#255537,#255539,.T.); +#255537 = VERTEX_POINT('',#255538); +#255538 = CARTESIAN_POINT('',(195.32915,-43.052919,1.585)); +#255539 = LINE('',#255540,#255541); +#255540 = CARTESIAN_POINT('',(195.32915,-42.127919,1.585)); +#255541 = VECTOR('',#255542,1.); +#255542 = DIRECTION('',(0.,-1.,0.)); +#255543 = ORIENTED_EDGE('',*,*,#255544,.T.); +#255544 = EDGE_CURVE('',#255537,#255545,#255547,.T.); +#255545 = VERTEX_POINT('',#255546); +#255546 = CARTESIAN_POINT('',(195.554496,-43.05436,1.585)); +#255547 = LINE('',#255548,#255549); +#255548 = CARTESIAN_POINT('',(195.32915,-43.052919,1.585)); +#255549 = VECTOR('',#255550,1.); +#255550 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#255551 = ORIENTED_EDGE('',*,*,#255552,.T.); +#255552 = EDGE_CURVE('',#255545,#255553,#255555,.T.); +#255553 = VERTEX_POINT('',#255554); +#255554 = CARTESIAN_POINT('',(195.539864,-43.202919,1.585)); +#255555 = CIRCLE('',#255556,7.500006711464E-02); +#255556 = AXIS2_PLACEMENT_3D('',#255557,#255558,#255559); +#255557 = CARTESIAN_POINT('',(195.53986406711,-43.12791893288,1.585)); +#255558 = DIRECTION('',(0.,0.,-1.)); +#255559 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#255560 = ORIENTED_EDGE('',*,*,#255561,.T.); +#255561 = EDGE_CURVE('',#255553,#255562,#255564,.T.); +#255562 = VERTEX_POINT('',#255563); +#255563 = CARTESIAN_POINT('',(194.953804,-43.201478,1.585)); +#255564 = LINE('',#255565,#255566); +#255565 = CARTESIAN_POINT('',(195.539864,-43.202919,1.585)); +#255566 = VECTOR('',#255567,1.); +#255567 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#255568 = ORIENTED_EDGE('',*,*,#255569,.T.); +#255569 = EDGE_CURVE('',#255562,#255570,#255572,.T.); +#255570 = VERTEX_POINT('',#255571); +#255571 = CARTESIAN_POINT('',(194.968436,-43.052919,1.585)); +#255572 = CIRCLE('',#255573,7.500006711464E-02); +#255573 = AXIS2_PLACEMENT_3D('',#255574,#255575,#255576); +#255574 = CARTESIAN_POINT('',(194.96843593288,-43.12791906711,1.585)); +#255575 = DIRECTION('',(0.,0.,-1.)); +#255576 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#255577 = ORIENTED_EDGE('',*,*,#255578,.T.); +#255578 = EDGE_CURVE('',#255570,#255579,#255581,.T.); +#255579 = VERTEX_POINT('',#255580); +#255580 = CARTESIAN_POINT('',(195.17915,-43.052919,1.585)); +#255581 = LINE('',#255582,#255583); +#255582 = CARTESIAN_POINT('',(194.968436,-43.052919,1.585)); +#255583 = VECTOR('',#255584,1.); +#255584 = DIRECTION('',(1.,0.,0.)); +#255585 = ORIENTED_EDGE('',*,*,#255586,.T.); +#255586 = EDGE_CURVE('',#255579,#255587,#255589,.T.); +#255587 = VERTEX_POINT('',#255588); +#255588 = CARTESIAN_POINT('',(195.17915,-42.356604,1.585)); +#255589 = LINE('',#255590,#255591); +#255590 = CARTESIAN_POINT('',(195.17915,-43.052919,1.585)); +#255591 = VECTOR('',#255592,1.); +#255592 = DIRECTION('',(0.,1.,0.)); +#255593 = ORIENTED_EDGE('',*,*,#255594,.T.); +#255594 = EDGE_CURVE('',#255587,#255595,#255597,.T.); +#255595 = VERTEX_POINT('',#255596); +#255596 = CARTESIAN_POINT('',(195.103514,-42.429131,1.585)); +#255597 = LINE('',#255598,#255599); +#255598 = CARTESIAN_POINT('',(195.17915,-42.356604,1.585)); +#255599 = VECTOR('',#255600,1.); +#255600 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#255601 = ORIENTED_EDGE('',*,*,#255602,.T.); +#255602 = EDGE_CURVE('',#255595,#255603,#255605,.T.); +#255603 = VERTEX_POINT('',#255604); +#255604 = CARTESIAN_POINT('',(194.988245,-42.48597,1.585)); +#255605 = LINE('',#255606,#255607); +#255606 = CARTESIAN_POINT('',(195.103514,-42.429131,1.585)); +#255607 = VECTOR('',#255608,1.); +#255608 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#255609 = ORIENTED_EDGE('',*,*,#255610,.T.); +#255610 = EDGE_CURVE('',#255603,#255611,#255613,.T.); +#255611 = VERTEX_POINT('',#255612); +#255612 = CARTESIAN_POINT('',(194.934895,-42.346551,1.585)); +#255613 = CIRCLE('',#255614,7.500005272361E-02); +#255614 = AXIS2_PLACEMENT_3D('',#255615,#255616,#255617); +#255615 = CARTESIAN_POINT('',(194.96843555676,-42.41363332972,1.585)); +#255616 = DIRECTION('',(0.,0.,-1.)); +#255617 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#255618 = ORIENTED_EDGE('',*,*,#255619,.T.); +#255619 = EDGE_CURVE('',#255611,#255620,#255622,.T.); +#255620 = VERTEX_POINT('',#255621); +#255621 = CARTESIAN_POINT('',(195.019247,-42.304375,1.585)); +#255622 = LINE('',#255623,#255624); +#255623 = CARTESIAN_POINT('',(194.934895,-42.346551,1.585)); +#255624 = VECTOR('',#255625,1.); +#255625 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#255626 = ORIENTED_EDGE('',*,*,#255627,.T.); +#255627 = EDGE_CURVE('',#255620,#255628,#255630,.T.); +#255628 = VERTEX_POINT('',#255629); +#255629 = CARTESIAN_POINT('',(195.100626,-42.222996,1.585)); +#255630 = LINE('',#255631,#255632); +#255631 = CARTESIAN_POINT('',(195.019247,-42.304375,1.585)); +#255632 = VECTOR('',#255633,1.); +#255633 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255634 = ORIENTED_EDGE('',*,*,#255635,.T.); +#255635 = EDGE_CURVE('',#255628,#255510,#255636,.T.); +#255636 = LINE('',#255637,#255638); +#255637 = CARTESIAN_POINT('',(195.100626,-42.222996,1.585)); +#255638 = VECTOR('',#255639,1.); +#255639 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#255640 = PLANE('',#255641); +#255641 = AXIS2_PLACEMENT_3D('',#255642,#255643,#255644); +#255642 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255643 = DIRECTION('',(0.,0.,1.)); +#255644 = DIRECTION('',(1.,0.,-0.)); +#255645 = SHELL_BASED_SURFACE_MODEL('',(#255646)); +#255646 = OPEN_SHELL('',(#255647)); +#255647 = ADVANCED_FACE('',(#255648),#255807,.T.); +#255648 = FACE_BOUND('',#255649,.F.); +#255649 = EDGE_LOOP('',(#255650,#255661,#255669,#255677,#255685,#255693, + #255701,#255709,#255718,#255726,#255735,#255743,#255751,#255759, + #255768,#255776,#255784,#255792,#255801)); +#255650 = ORIENTED_EDGE('',*,*,#255651,.T.); +#255651 = EDGE_CURVE('',#255652,#255654,#255656,.T.); +#255652 = VERTEX_POINT('',#255653); +#255653 = CARTESIAN_POINT('',(198.982514,-42.108456,1.585)); +#255654 = VERTEX_POINT('',#255655); +#255655 = CARTESIAN_POINT('',(199.491909,-42.117786,1.585)); +#255656 = CIRCLE('',#255657,0.450326844012); +#255657 = AXIS2_PLACEMENT_3D('',#255658,#255659,#255660); +#255658 = CARTESIAN_POINT('',(199.2304110301,-42.48440989199,1.585)); +#255659 = DIRECTION('',(0.,0.,-1.)); +#255660 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#255661 = ORIENTED_EDGE('',*,*,#255662,.T.); +#255662 = EDGE_CURVE('',#255654,#255663,#255665,.T.); +#255663 = VERTEX_POINT('',#255664); +#255664 = CARTESIAN_POINT('',(199.555362,-42.183316,1.585)); +#255665 = LINE('',#255666,#255667); +#255666 = CARTESIAN_POINT('',(199.491909,-42.117786,1.585)); +#255667 = VECTOR('',#255668,1.); +#255668 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#255669 = ORIENTED_EDGE('',*,*,#255670,.T.); +#255670 = EDGE_CURVE('',#255663,#255671,#255673,.T.); +#255671 = VERTEX_POINT('',#255672); +#255672 = CARTESIAN_POINT('',(199.613423,-42.303763,1.585)); +#255673 = LINE('',#255674,#255675); +#255674 = CARTESIAN_POINT('',(199.555362,-42.183316,1.585)); +#255675 = VECTOR('',#255676,1.); +#255676 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#255677 = ORIENTED_EDGE('',*,*,#255678,.T.); +#255678 = EDGE_CURVE('',#255671,#255679,#255681,.T.); +#255679 = VERTEX_POINT('',#255680); +#255680 = CARTESIAN_POINT('',(199.612664,-42.430095,1.585)); +#255681 = LINE('',#255682,#255683); +#255682 = CARTESIAN_POINT('',(199.613423,-42.303763,1.585)); +#255683 = VECTOR('',#255684,1.); +#255684 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#255685 = ORIENTED_EDGE('',*,*,#255686,.T.); +#255686 = EDGE_CURVE('',#255679,#255687,#255689,.T.); +#255687 = VERTEX_POINT('',#255688); +#255688 = CARTESIAN_POINT('',(199.554606,-42.598158,1.585)); +#255689 = LINE('',#255690,#255691); +#255690 = CARTESIAN_POINT('',(199.612664,-42.430095,1.585)); +#255691 = VECTOR('',#255692,1.); +#255692 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#255693 = ORIENTED_EDGE('',*,*,#255694,.T.); +#255694 = EDGE_CURVE('',#255687,#255695,#255697,.T.); +#255695 = VERTEX_POINT('',#255696); +#255696 = CARTESIAN_POINT('',(199.101883,-43.052919,1.585)); +#255697 = LINE('',#255698,#255699); +#255698 = CARTESIAN_POINT('',(199.554606,-42.598158,1.585)); +#255699 = VECTOR('',#255700,1.); +#255700 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#255701 = ORIENTED_EDGE('',*,*,#255702,.T.); +#255702 = EDGE_CURVE('',#255695,#255703,#255705,.T.); +#255703 = VERTEX_POINT('',#255704); +#255704 = CARTESIAN_POINT('',(199.554496,-43.05436,1.585)); +#255705 = LINE('',#255706,#255707); +#255706 = CARTESIAN_POINT('',(199.101883,-43.052919,1.585)); +#255707 = VECTOR('',#255708,1.); +#255708 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#255709 = ORIENTED_EDGE('',*,*,#255710,.T.); +#255710 = EDGE_CURVE('',#255703,#255711,#255713,.T.); +#255711 = VERTEX_POINT('',#255712); +#255712 = CARTESIAN_POINT('',(199.539864,-43.202919,1.585)); +#255713 = CIRCLE('',#255714,7.500006711464E-02); +#255714 = AXIS2_PLACEMENT_3D('',#255715,#255716,#255717); +#255715 = CARTESIAN_POINT('',(199.53986406711,-43.12791893288,1.585)); +#255716 = DIRECTION('',(0.,0.,-1.)); +#255717 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#255718 = ORIENTED_EDGE('',*,*,#255719,.T.); +#255719 = EDGE_CURVE('',#255711,#255720,#255722,.T.); +#255720 = VERTEX_POINT('',#255721); +#255721 = CARTESIAN_POINT('',(198.906185,-43.201478,1.585)); +#255722 = LINE('',#255723,#255724); +#255723 = CARTESIAN_POINT('',(199.539864,-43.202919,1.585)); +#255724 = VECTOR('',#255725,1.); +#255725 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#255726 = ORIENTED_EDGE('',*,*,#255727,.T.); +#255727 = EDGE_CURVE('',#255720,#255728,#255730,.T.); +#255728 = VERTEX_POINT('',#255729); +#255729 = CARTESIAN_POINT('',(198.867784,-43.074886,1.585)); +#255730 = CIRCLE('',#255731,7.500021013109E-02); +#255731 = AXIS2_PLACEMENT_3D('',#255732,#255733,#255734); +#255732 = CARTESIAN_POINT('',(198.9208173167,-43.12791899764,1.585)); +#255733 = DIRECTION('',(0.,0.,-1.)); +#255734 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#255735 = ORIENTED_EDGE('',*,*,#255736,.T.); +#255736 = EDGE_CURVE('',#255728,#255737,#255739,.T.); +#255737 = VERTEX_POINT('',#255738); +#255738 = CARTESIAN_POINT('',(199.426692,-42.515976,1.585)); +#255739 = LINE('',#255740,#255741); +#255740 = CARTESIAN_POINT('',(198.867784,-43.074886,1.585)); +#255741 = VECTOR('',#255742,1.); +#255742 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#255743 = ORIENTED_EDGE('',*,*,#255744,.T.); +#255744 = EDGE_CURVE('',#255737,#255745,#255747,.T.); +#255745 = VERTEX_POINT('',#255746); +#255746 = CARTESIAN_POINT('',(199.464864,-42.401463,1.585)); +#255747 = LINE('',#255748,#255749); +#255748 = CARTESIAN_POINT('',(199.426692,-42.515976,1.585)); +#255749 = VECTOR('',#255750,1.); +#255750 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#255751 = ORIENTED_EDGE('',*,*,#255752,.T.); +#255752 = EDGE_CURVE('',#255745,#255753,#255755,.T.); +#255753 = VERTEX_POINT('',#255754); +#255754 = CARTESIAN_POINT('',(199.464864,-42.3361,1.585)); +#255755 = LINE('',#255756,#255757); +#255756 = CARTESIAN_POINT('',(199.464864,-42.401463,1.585)); +#255757 = VECTOR('',#255758,1.); +#255758 = DIRECTION('',(0.,1.,0.)); +#255759 = ORIENTED_EDGE('',*,*,#255760,.T.); +#255760 = EDGE_CURVE('',#255753,#255761,#255763,.T.); +#255761 = VERTEX_POINT('',#255762); +#255762 = CARTESIAN_POINT('',(199.331683,-42.202919,1.585)); +#255763 = CIRCLE('',#255764,0.18686440374); +#255764 = AXIS2_PLACEMENT_3D('',#255765,#255766,#255767); +#255765 = CARTESIAN_POINT('',(199.284147,-42.383636,1.585)); +#255766 = DIRECTION('',(0.,0.,1.)); +#255767 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#255768 = ORIENTED_EDGE('',*,*,#255769,.T.); +#255769 = EDGE_CURVE('',#255761,#255770,#255772,.T.); +#255770 = VERTEX_POINT('',#255771); +#255771 = CARTESIAN_POINT('',(199.128998,-42.202919,1.585)); +#255772 = LINE('',#255773,#255774); +#255773 = CARTESIAN_POINT('',(199.331683,-42.202919,1.585)); +#255774 = VECTOR('',#255775,1.); +#255775 = DIRECTION('',(-1.,0.,0.)); +#255776 = ORIENTED_EDGE('',*,*,#255777,.T.); +#255777 = EDGE_CURVE('',#255770,#255778,#255780,.T.); +#255778 = VERTEX_POINT('',#255779); +#255779 = CARTESIAN_POINT('',(199.060482,-42.237177,1.585)); +#255780 = LINE('',#255781,#255782); +#255781 = CARTESIAN_POINT('',(199.128998,-42.202919,1.585)); +#255782 = VECTOR('',#255783,1.); +#255783 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#255784 = ORIENTED_EDGE('',*,*,#255785,.T.); +#255785 = EDGE_CURVE('',#255778,#255786,#255788,.T.); +#255786 = VERTEX_POINT('',#255787); +#255787 = CARTESIAN_POINT('',(199.010104,-42.285517,1.585)); +#255788 = LINE('',#255789,#255790); +#255789 = CARTESIAN_POINT('',(199.060482,-42.237177,1.585)); +#255790 = VECTOR('',#255791,1.); +#255791 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#255792 = ORIENTED_EDGE('',*,*,#255793,.T.); +#255793 = EDGE_CURVE('',#255786,#255794,#255796,.T.); +#255794 = VERTEX_POINT('',#255795); +#255795 = CARTESIAN_POINT('',(198.915403,-42.170124,1.585)); +#255796 = CIRCLE('',#255797,7.499996838527E-02); +#255797 = AXIS2_PLACEMENT_3D('',#255798,#255799,#255800); +#255798 = CARTESIAN_POINT('',(198.968436,-42.22315697246,1.585)); +#255799 = DIRECTION('',(0.,0.,-1.)); +#255800 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#255801 = ORIENTED_EDGE('',*,*,#255802,.T.); +#255802 = EDGE_CURVE('',#255794,#255652,#255803,.T.); +#255803 = LINE('',#255804,#255805); +#255804 = CARTESIAN_POINT('',(198.915403,-42.170124,1.585)); +#255805 = VECTOR('',#255806,1.); +#255806 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#255807 = PLANE('',#255808); +#255808 = AXIS2_PLACEMENT_3D('',#255809,#255810,#255811); +#255809 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255810 = DIRECTION('',(0.,0.,1.)); +#255811 = DIRECTION('',(1.,0.,-0.)); +#255812 = SHELL_BASED_SURFACE_MODEL('',(#255813)); +#255813 = OPEN_SHELL('',(#255814)); +#255814 = ADVANCED_FACE('',(#255815,#255931),#256014,.T.); +#255815 = FACE_BOUND('',#255816,.F.); +#255816 = EDGE_LOOP('',(#255817,#255828,#255836,#255844,#255852,#255860, + #255868,#255876,#255884,#255892,#255900,#255908,#255916,#255925)); +#255817 = ORIENTED_EDGE('',*,*,#255818,.T.); +#255818 = EDGE_CURVE('',#255819,#255821,#255823,.T.); +#255819 = VERTEX_POINT('',#255820); +#255820 = CARTESIAN_POINT('',(192.942496,-42.113287,1.585)); +#255821 = VERTEX_POINT('',#255822); +#255822 = CARTESIAN_POINT('',(193.016055,-42.052919,1.585)); +#255823 = CIRCLE('',#255824,7.500074938983E-02); +#255824 = AXIS2_PLACEMENT_3D('',#255825,#255826,#255827); +#255825 = CARTESIAN_POINT('',(193.01605546611,-42.12791974938,1.585)); +#255826 = DIRECTION('',(0.,0.,-1.)); +#255827 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#255828 = ORIENTED_EDGE('',*,*,#255829,.T.); +#255829 = EDGE_CURVE('',#255821,#255830,#255832,.T.); +#255830 = VERTEX_POINT('',#255831); +#255831 = CARTESIAN_POINT('',(193.261555,-42.053648,1.585)); +#255832 = LINE('',#255833,#255834); +#255833 = CARTESIAN_POINT('',(193.016055,-42.052919,1.585)); +#255834 = VECTOR('',#255835,1.); +#255835 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#255836 = ORIENTED_EDGE('',*,*,#255837,.T.); +#255837 = EDGE_CURVE('',#255830,#255838,#255840,.T.); +#255838 = VERTEX_POINT('',#255839); +#255839 = CARTESIAN_POINT('',(193.438675,-42.113178,1.585)); +#255840 = LINE('',#255841,#255842); +#255841 = CARTESIAN_POINT('',(193.261555,-42.053648,1.585)); +#255842 = VECTOR('',#255843,1.); +#255843 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#255844 = ORIENTED_EDGE('',*,*,#255845,.T.); +#255845 = EDGE_CURVE('',#255838,#255846,#255848,.T.); +#255846 = VERTEX_POINT('',#255847); +#255847 = CARTESIAN_POINT('',(193.555364,-42.23094,1.585)); +#255848 = LINE('',#255849,#255850); +#255849 = CARTESIAN_POINT('',(193.438675,-42.113178,1.585)); +#255850 = VECTOR('',#255851,1.); +#255851 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#255852 = ORIENTED_EDGE('',*,*,#255853,.T.); +#255853 = EDGE_CURVE('',#255846,#255854,#255856,.T.); +#255854 = VERTEX_POINT('',#255855); +#255855 = CARTESIAN_POINT('',(193.612625,-42.347824,1.585)); +#255856 = LINE('',#255857,#255858); +#255857 = CARTESIAN_POINT('',(193.555364,-42.23094,1.585)); +#255858 = VECTOR('',#255859,1.); +#255859 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#255860 = ORIENTED_EDGE('',*,*,#255861,.T.); +#255861 = EDGE_CURVE('',#255854,#255862,#255864,.T.); +#255862 = VERTEX_POINT('',#255863); +#255863 = CARTESIAN_POINT('',(193.662483,-42.55649,1.585)); +#255864 = LINE('',#255865,#255866); +#255865 = CARTESIAN_POINT('',(193.612625,-42.347824,1.585)); +#255866 = VECTOR('',#255867,1.); +#255867 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#255868 = ORIENTED_EDGE('',*,*,#255869,.T.); +#255869 = EDGE_CURVE('',#255862,#255870,#255872,.T.); +#255870 = VERTEX_POINT('',#255871); +#255871 = CARTESIAN_POINT('',(193.660244,-42.717537,1.585)); +#255872 = LINE('',#255873,#255874); +#255873 = CARTESIAN_POINT('',(193.662483,-42.55649,1.585)); +#255874 = VECTOR('',#255875,1.); +#255875 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#255876 = ORIENTED_EDGE('',*,*,#255877,.T.); +#255877 = EDGE_CURVE('',#255870,#255878,#255880,.T.); +#255878 = VERTEX_POINT('',#255879); +#255879 = CARTESIAN_POINT('',(193.606946,-42.923364,1.585)); +#255880 = LINE('',#255881,#255882); +#255881 = CARTESIAN_POINT('',(193.660244,-42.717537,1.585)); +#255882 = VECTOR('',#255883,1.); +#255883 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#255884 = ORIENTED_EDGE('',*,*,#255885,.T.); +#255885 = EDGE_CURVE('',#255878,#255886,#255888,.T.); +#255886 = VERTEX_POINT('',#255887); +#255887 = CARTESIAN_POINT('',(193.549996,-43.032344,1.585)); +#255888 = LINE('',#255889,#255890); +#255889 = CARTESIAN_POINT('',(193.606946,-42.923364,1.585)); +#255890 = VECTOR('',#255891,1.); +#255891 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#255892 = ORIENTED_EDGE('',*,*,#255893,.T.); +#255893 = EDGE_CURVE('',#255886,#255894,#255896,.T.); +#255894 = VERTEX_POINT('',#255895); +#255895 = CARTESIAN_POINT('',(193.434149,-43.145457,1.585)); +#255896 = LINE('',#255897,#255898); +#255897 = CARTESIAN_POINT('',(193.549996,-43.032344,1.585)); +#255898 = VECTOR('',#255899,1.); +#255899 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#255900 = ORIENTED_EDGE('',*,*,#255901,.T.); +#255901 = EDGE_CURVE('',#255894,#255902,#255904,.T.); +#255902 = VERTEX_POINT('',#255903); +#255903 = CARTESIAN_POINT('',(193.261555,-43.202189,1.585)); +#255904 = LINE('',#255905,#255906); +#255905 = CARTESIAN_POINT('',(193.434149,-43.145457,1.585)); +#255906 = VECTOR('',#255907,1.); +#255907 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#255908 = ORIENTED_EDGE('',*,*,#255909,.T.); +#255909 = EDGE_CURVE('',#255902,#255910,#255912,.T.); +#255910 = VERTEX_POINT('',#255911); +#255911 = CARTESIAN_POINT('',(193.001423,-43.201478,1.585)); +#255912 = LINE('',#255913,#255914); +#255913 = CARTESIAN_POINT('',(193.261555,-43.202189,1.585)); +#255914 = VECTOR('',#255915,1.); +#255915 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#255916 = ORIENTED_EDGE('',*,*,#255917,.T.); +#255917 = EDGE_CURVE('',#255910,#255918,#255920,.T.); +#255918 = VERTEX_POINT('',#255919); +#255919 = CARTESIAN_POINT('',(192.941055,-43.127919,1.585)); +#255920 = CIRCLE('',#255921,7.500074938991E-02); +#255921 = AXIS2_PLACEMENT_3D('',#255922,#255923,#255924); +#255922 = CARTESIAN_POINT('',(193.01605574938,-43.12791853389,1.585)); +#255923 = DIRECTION('',(0.,0.,-1.)); +#255924 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#255925 = ORIENTED_EDGE('',*,*,#255926,.T.); +#255926 = EDGE_CURVE('',#255918,#255819,#255927,.T.); +#255927 = LINE('',#255928,#255929); +#255928 = CARTESIAN_POINT('',(192.941055,-43.127919,1.585)); +#255929 = VECTOR('',#255930,1.); +#255930 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#255931 = FACE_BOUND('',#255932,.F.); +#255932 = EDGE_LOOP('',(#255933,#255943,#255951,#255959,#255967,#255975, + #255983,#255992,#256000,#256008)); +#255933 = ORIENTED_EDGE('',*,*,#255934,.T.); +#255934 = EDGE_CURVE('',#255935,#255937,#255939,.T.); +#255935 = VERTEX_POINT('',#255936); +#255936 = CARTESIAN_POINT('',(193.356493,-42.24109,1.585)); +#255937 = VERTEX_POINT('',#255938); +#255938 = CARTESIAN_POINT('',(193.24198,-42.202919,1.585)); +#255939 = LINE('',#255940,#255941); +#255940 = CARTESIAN_POINT('',(193.356493,-42.24109,1.585)); +#255941 = VECTOR('',#255942,1.); +#255942 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#255943 = ORIENTED_EDGE('',*,*,#255944,.T.); +#255944 = EDGE_CURVE('',#255937,#255945,#255947,.T.); +#255945 = VERTEX_POINT('',#255946); +#255946 = CARTESIAN_POINT('',(193.091055,-42.202919,1.585)); +#255947 = LINE('',#255948,#255949); +#255948 = CARTESIAN_POINT('',(193.24198,-42.202919,1.585)); +#255949 = VECTOR('',#255950,1.); +#255950 = DIRECTION('',(-1.,0.,0.)); +#255951 = ORIENTED_EDGE('',*,*,#255952,.T.); +#255952 = EDGE_CURVE('',#255945,#255953,#255955,.T.); +#255953 = VERTEX_POINT('',#255954); +#255954 = CARTESIAN_POINT('',(193.091055,-43.052919,1.585)); +#255955 = LINE('',#255956,#255957); +#255956 = CARTESIAN_POINT('',(193.091055,-42.202919,1.585)); +#255957 = VECTOR('',#255958,1.); +#255958 = DIRECTION('',(0.,-1.,0.)); +#255959 = ORIENTED_EDGE('',*,*,#255960,.T.); +#255960 = EDGE_CURVE('',#255953,#255961,#255963,.T.); +#255961 = VERTEX_POINT('',#255962); +#255962 = CARTESIAN_POINT('',(193.24198,-43.052919,1.585)); +#255963 = LINE('',#255964,#255965); +#255964 = CARTESIAN_POINT('',(193.091055,-43.052919,1.585)); +#255965 = VECTOR('',#255966,1.); +#255966 = DIRECTION('',(1.,0.,0.)); +#255967 = ORIENTED_EDGE('',*,*,#255968,.T.); +#255968 = EDGE_CURVE('',#255961,#255969,#255971,.T.); +#255969 = VERTEX_POINT('',#255970); +#255970 = CARTESIAN_POINT('',(193.356493,-43.014747,1.585)); +#255971 = LINE('',#255972,#255973); +#255972 = CARTESIAN_POINT('',(193.24198,-43.052919,1.585)); +#255973 = VECTOR('',#255974,1.); +#255974 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#255975 = ORIENTED_EDGE('',*,*,#255976,.T.); +#255976 = EDGE_CURVE('',#255969,#255977,#255979,.T.); +#255977 = VERTEX_POINT('',#255978); +#255978 = CARTESIAN_POINT('',(193.430605,-42.940634,1.585)); +#255979 = LINE('',#255980,#255981); +#255980 = CARTESIAN_POINT('',(193.356493,-43.014747,1.585)); +#255981 = VECTOR('',#255982,1.); +#255982 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#255983 = ORIENTED_EDGE('',*,*,#255984,.T.); +#255984 = EDGE_CURVE('',#255977,#255985,#255987,.T.); +#255985 = VERTEX_POINT('',#255986); +#255986 = CARTESIAN_POINT('',(193.512483,-42.565724,1.585)); +#255987 = CIRCLE('',#255988,0.611719141131); +#255988 = AXIS2_PLACEMENT_3D('',#255989,#255990,#255991); +#255989 = CARTESIAN_POINT('',(192.90407096224,-42.62924643649,1.585)); +#255990 = DIRECTION('',(0.,0.,1.)); +#255991 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#255992 = ORIENTED_EDGE('',*,*,#255993,.T.); +#255993 = EDGE_CURVE('',#255985,#255994,#255996,.T.); +#255994 = VERTEX_POINT('',#255995); +#255995 = CARTESIAN_POINT('',(193.469099,-42.39219,1.585)); +#255996 = LINE('',#255997,#255998); +#255997 = CARTESIAN_POINT('',(193.512483,-42.565724,1.585)); +#255998 = VECTOR('',#255999,1.); +#255999 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256000 = ORIENTED_EDGE('',*,*,#256001,.T.); +#256001 = EDGE_CURVE('',#255994,#256002,#256004,.T.); +#256002 = VERTEX_POINT('',#256003); +#256003 = CARTESIAN_POINT('',(193.430606,-42.315203,1.585)); +#256004 = LINE('',#256005,#256006); +#256005 = CARTESIAN_POINT('',(193.469099,-42.39219,1.585)); +#256006 = VECTOR('',#256007,1.); +#256007 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256008 = ORIENTED_EDGE('',*,*,#256009,.T.); +#256009 = EDGE_CURVE('',#256002,#255935,#256010,.T.); +#256010 = LINE('',#256011,#256012); +#256011 = CARTESIAN_POINT('',(193.430606,-42.315203,1.585)); +#256012 = VECTOR('',#256013,1.); +#256013 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256014 = PLANE('',#256015); +#256015 = AXIS2_PLACEMENT_3D('',#256016,#256017,#256018); +#256016 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256017 = DIRECTION('',(0.,0.,1.)); +#256018 = DIRECTION('',(1.,0.,-0.)); +#256019 = SHELL_BASED_SURFACE_MODEL('',(#256020)); +#256020 = OPEN_SHELL('',(#256021)); +#256021 = ADVANCED_FACE('',(#256022,#256138),#256221,.T.); +#256022 = FACE_BOUND('',#256023,.F.); +#256023 = EDGE_LOOP('',(#256024,#256035,#256043,#256051,#256059,#256067, + #256075,#256083,#256091,#256099,#256107,#256115,#256123,#256132)); +#256024 = ORIENTED_EDGE('',*,*,#256025,.T.); +#256025 = EDGE_CURVE('',#256026,#256028,#256030,.T.); +#256026 = VERTEX_POINT('',#256027); +#256027 = CARTESIAN_POINT('',(196.942496,-42.113287,1.585)); +#256028 = VERTEX_POINT('',#256029); +#256029 = CARTESIAN_POINT('',(197.016055,-42.052919,1.585)); +#256030 = CIRCLE('',#256031,7.500074938983E-02); +#256031 = AXIS2_PLACEMENT_3D('',#256032,#256033,#256034); +#256032 = CARTESIAN_POINT('',(197.01605546611,-42.12791974938,1.585)); +#256033 = DIRECTION('',(0.,0.,-1.)); +#256034 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256035 = ORIENTED_EDGE('',*,*,#256036,.T.); +#256036 = EDGE_CURVE('',#256028,#256037,#256039,.T.); +#256037 = VERTEX_POINT('',#256038); +#256038 = CARTESIAN_POINT('',(197.261555,-42.053648,1.585)); +#256039 = LINE('',#256040,#256041); +#256040 = CARTESIAN_POINT('',(197.016055,-42.052919,1.585)); +#256041 = VECTOR('',#256042,1.); +#256042 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#256043 = ORIENTED_EDGE('',*,*,#256044,.T.); +#256044 = EDGE_CURVE('',#256037,#256045,#256047,.T.); +#256045 = VERTEX_POINT('',#256046); +#256046 = CARTESIAN_POINT('',(197.438675,-42.113178,1.585)); +#256047 = LINE('',#256048,#256049); +#256048 = CARTESIAN_POINT('',(197.261555,-42.053648,1.585)); +#256049 = VECTOR('',#256050,1.); +#256050 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#256051 = ORIENTED_EDGE('',*,*,#256052,.T.); +#256052 = EDGE_CURVE('',#256045,#256053,#256055,.T.); +#256053 = VERTEX_POINT('',#256054); +#256054 = CARTESIAN_POINT('',(197.555364,-42.23094,1.585)); +#256055 = LINE('',#256056,#256057); +#256056 = CARTESIAN_POINT('',(197.438675,-42.113178,1.585)); +#256057 = VECTOR('',#256058,1.); +#256058 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#256059 = ORIENTED_EDGE('',*,*,#256060,.T.); +#256060 = EDGE_CURVE('',#256053,#256061,#256063,.T.); +#256061 = VERTEX_POINT('',#256062); +#256062 = CARTESIAN_POINT('',(197.612625,-42.347824,1.585)); +#256063 = LINE('',#256064,#256065); +#256064 = CARTESIAN_POINT('',(197.555364,-42.23094,1.585)); +#256065 = VECTOR('',#256066,1.); +#256066 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#256067 = ORIENTED_EDGE('',*,*,#256068,.T.); +#256068 = EDGE_CURVE('',#256061,#256069,#256071,.T.); +#256069 = VERTEX_POINT('',#256070); +#256070 = CARTESIAN_POINT('',(197.662483,-42.55649,1.585)); +#256071 = LINE('',#256072,#256073); +#256072 = CARTESIAN_POINT('',(197.612625,-42.347824,1.585)); +#256073 = VECTOR('',#256074,1.); +#256074 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#256075 = ORIENTED_EDGE('',*,*,#256076,.T.); +#256076 = EDGE_CURVE('',#256069,#256077,#256079,.T.); +#256077 = VERTEX_POINT('',#256078); +#256078 = CARTESIAN_POINT('',(197.660244,-42.717537,1.585)); +#256079 = LINE('',#256080,#256081); +#256080 = CARTESIAN_POINT('',(197.662483,-42.55649,1.585)); +#256081 = VECTOR('',#256082,1.); +#256082 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#256083 = ORIENTED_EDGE('',*,*,#256084,.T.); +#256084 = EDGE_CURVE('',#256077,#256085,#256087,.T.); +#256085 = VERTEX_POINT('',#256086); +#256086 = CARTESIAN_POINT('',(197.606946,-42.923364,1.585)); +#256087 = LINE('',#256088,#256089); +#256088 = CARTESIAN_POINT('',(197.660244,-42.717537,1.585)); +#256089 = VECTOR('',#256090,1.); +#256090 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#256091 = ORIENTED_EDGE('',*,*,#256092,.T.); +#256092 = EDGE_CURVE('',#256085,#256093,#256095,.T.); +#256093 = VERTEX_POINT('',#256094); +#256094 = CARTESIAN_POINT('',(197.549996,-43.032344,1.585)); +#256095 = LINE('',#256096,#256097); +#256096 = CARTESIAN_POINT('',(197.606946,-42.923364,1.585)); +#256097 = VECTOR('',#256098,1.); +#256098 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#256099 = ORIENTED_EDGE('',*,*,#256100,.T.); +#256100 = EDGE_CURVE('',#256093,#256101,#256103,.T.); +#256101 = VERTEX_POINT('',#256102); +#256102 = CARTESIAN_POINT('',(197.434149,-43.145457,1.585)); +#256103 = LINE('',#256104,#256105); +#256104 = CARTESIAN_POINT('',(197.549996,-43.032344,1.585)); +#256105 = VECTOR('',#256106,1.); +#256106 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#256107 = ORIENTED_EDGE('',*,*,#256108,.T.); +#256108 = EDGE_CURVE('',#256101,#256109,#256111,.T.); +#256109 = VERTEX_POINT('',#256110); +#256110 = CARTESIAN_POINT('',(197.261555,-43.202189,1.585)); +#256111 = LINE('',#256112,#256113); +#256112 = CARTESIAN_POINT('',(197.434149,-43.145457,1.585)); +#256113 = VECTOR('',#256114,1.); +#256114 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#256115 = ORIENTED_EDGE('',*,*,#256116,.T.); +#256116 = EDGE_CURVE('',#256109,#256117,#256119,.T.); +#256117 = VERTEX_POINT('',#256118); +#256118 = CARTESIAN_POINT('',(197.001423,-43.201478,1.585)); +#256119 = LINE('',#256120,#256121); +#256120 = CARTESIAN_POINT('',(197.261555,-43.202189,1.585)); +#256121 = VECTOR('',#256122,1.); +#256122 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#256123 = ORIENTED_EDGE('',*,*,#256124,.T.); +#256124 = EDGE_CURVE('',#256117,#256125,#256127,.T.); +#256125 = VERTEX_POINT('',#256126); +#256126 = CARTESIAN_POINT('',(196.941055,-43.127919,1.585)); +#256127 = CIRCLE('',#256128,7.500074938991E-02); +#256128 = AXIS2_PLACEMENT_3D('',#256129,#256130,#256131); +#256129 = CARTESIAN_POINT('',(197.01605574938,-43.12791853389,1.585)); +#256130 = DIRECTION('',(0.,0.,-1.)); +#256131 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#256132 = ORIENTED_EDGE('',*,*,#256133,.T.); +#256133 = EDGE_CURVE('',#256125,#256026,#256134,.T.); +#256134 = LINE('',#256135,#256136); +#256135 = CARTESIAN_POINT('',(196.941055,-43.127919,1.585)); +#256136 = VECTOR('',#256137,1.); +#256137 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256138 = FACE_BOUND('',#256139,.F.); +#256139 = EDGE_LOOP('',(#256140,#256150,#256158,#256166,#256174,#256182, + #256190,#256199,#256207,#256215)); +#256140 = ORIENTED_EDGE('',*,*,#256141,.T.); +#256141 = EDGE_CURVE('',#256142,#256144,#256146,.T.); +#256142 = VERTEX_POINT('',#256143); +#256143 = CARTESIAN_POINT('',(197.356493,-42.24109,1.585)); +#256144 = VERTEX_POINT('',#256145); +#256145 = CARTESIAN_POINT('',(197.24198,-42.202919,1.585)); +#256146 = LINE('',#256147,#256148); +#256147 = CARTESIAN_POINT('',(197.356493,-42.24109,1.585)); +#256148 = VECTOR('',#256149,1.); +#256149 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#256150 = ORIENTED_EDGE('',*,*,#256151,.T.); +#256151 = EDGE_CURVE('',#256144,#256152,#256154,.T.); +#256152 = VERTEX_POINT('',#256153); +#256153 = CARTESIAN_POINT('',(197.091055,-42.202919,1.585)); +#256154 = LINE('',#256155,#256156); +#256155 = CARTESIAN_POINT('',(197.24198,-42.202919,1.585)); +#256156 = VECTOR('',#256157,1.); +#256157 = DIRECTION('',(-1.,0.,0.)); +#256158 = ORIENTED_EDGE('',*,*,#256159,.T.); +#256159 = EDGE_CURVE('',#256152,#256160,#256162,.T.); +#256160 = VERTEX_POINT('',#256161); +#256161 = CARTESIAN_POINT('',(197.091055,-43.052919,1.585)); +#256162 = LINE('',#256163,#256164); +#256163 = CARTESIAN_POINT('',(197.091055,-42.202919,1.585)); +#256164 = VECTOR('',#256165,1.); +#256165 = DIRECTION('',(0.,-1.,0.)); +#256166 = ORIENTED_EDGE('',*,*,#256167,.T.); +#256167 = EDGE_CURVE('',#256160,#256168,#256170,.T.); +#256168 = VERTEX_POINT('',#256169); +#256169 = CARTESIAN_POINT('',(197.24198,-43.052919,1.585)); +#256170 = LINE('',#256171,#256172); +#256171 = CARTESIAN_POINT('',(197.091055,-43.052919,1.585)); +#256172 = VECTOR('',#256173,1.); +#256173 = DIRECTION('',(1.,0.,0.)); +#256174 = ORIENTED_EDGE('',*,*,#256175,.T.); +#256175 = EDGE_CURVE('',#256168,#256176,#256178,.T.); +#256176 = VERTEX_POINT('',#256177); +#256177 = CARTESIAN_POINT('',(197.356493,-43.014747,1.585)); +#256178 = LINE('',#256179,#256180); +#256179 = CARTESIAN_POINT('',(197.24198,-43.052919,1.585)); +#256180 = VECTOR('',#256181,1.); +#256181 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#256182 = ORIENTED_EDGE('',*,*,#256183,.T.); +#256183 = EDGE_CURVE('',#256176,#256184,#256186,.T.); +#256184 = VERTEX_POINT('',#256185); +#256185 = CARTESIAN_POINT('',(197.430605,-42.940634,1.585)); +#256186 = LINE('',#256187,#256188); +#256187 = CARTESIAN_POINT('',(197.356493,-43.014747,1.585)); +#256188 = VECTOR('',#256189,1.); +#256189 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#256190 = ORIENTED_EDGE('',*,*,#256191,.T.); +#256191 = EDGE_CURVE('',#256184,#256192,#256194,.T.); +#256192 = VERTEX_POINT('',#256193); +#256193 = CARTESIAN_POINT('',(197.512483,-42.565724,1.585)); +#256194 = CIRCLE('',#256195,0.611719141131); +#256195 = AXIS2_PLACEMENT_3D('',#256196,#256197,#256198); +#256196 = CARTESIAN_POINT('',(196.90407096224,-42.62924643649,1.585)); +#256197 = DIRECTION('',(0.,0.,1.)); +#256198 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#256199 = ORIENTED_EDGE('',*,*,#256200,.T.); +#256200 = EDGE_CURVE('',#256192,#256201,#256203,.T.); +#256201 = VERTEX_POINT('',#256202); +#256202 = CARTESIAN_POINT('',(197.469099,-42.39219,1.585)); +#256203 = LINE('',#256204,#256205); +#256204 = CARTESIAN_POINT('',(197.512483,-42.565724,1.585)); +#256205 = VECTOR('',#256206,1.); +#256206 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256207 = ORIENTED_EDGE('',*,*,#256208,.T.); +#256208 = EDGE_CURVE('',#256201,#256209,#256211,.T.); +#256209 = VERTEX_POINT('',#256210); +#256210 = CARTESIAN_POINT('',(197.430606,-42.315203,1.585)); +#256211 = LINE('',#256212,#256213); +#256212 = CARTESIAN_POINT('',(197.469099,-42.39219,1.585)); +#256213 = VECTOR('',#256214,1.); +#256214 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256215 = ORIENTED_EDGE('',*,*,#256216,.T.); +#256216 = EDGE_CURVE('',#256209,#256142,#256217,.T.); +#256217 = LINE('',#256218,#256219); +#256218 = CARTESIAN_POINT('',(197.430606,-42.315203,1.585)); +#256219 = VECTOR('',#256220,1.); +#256220 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256221 = PLANE('',#256222); +#256222 = AXIS2_PLACEMENT_3D('',#256223,#256224,#256225); +#256223 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256224 = DIRECTION('',(0.,0.,1.)); +#256225 = DIRECTION('',(1.,0.,-0.)); +#256226 = SHELL_BASED_SURFACE_MODEL('',(#256227)); +#256227 = OPEN_SHELL('',(#256228)); +#256228 = ADVANCED_FACE('',(#256229,#256345),#256428,.T.); +#256229 = FACE_BOUND('',#256230,.F.); +#256230 = EDGE_LOOP('',(#256231,#256242,#256250,#256258,#256266,#256274, + #256282,#256290,#256298,#256306,#256314,#256322,#256330,#256339)); +#256231 = ORIENTED_EDGE('',*,*,#256232,.T.); +#256232 = EDGE_CURVE('',#256233,#256235,#256237,.T.); +#256233 = VERTEX_POINT('',#256234); +#256234 = CARTESIAN_POINT('',(200.942496,-42.113287,1.585)); +#256235 = VERTEX_POINT('',#256236); +#256236 = CARTESIAN_POINT('',(201.016055,-42.052919,1.585)); +#256237 = CIRCLE('',#256238,7.500074938983E-02); +#256238 = AXIS2_PLACEMENT_3D('',#256239,#256240,#256241); +#256239 = CARTESIAN_POINT('',(201.01605546611,-42.12791974938,1.585)); +#256240 = DIRECTION('',(0.,0.,-1.)); +#256241 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256242 = ORIENTED_EDGE('',*,*,#256243,.T.); +#256243 = EDGE_CURVE('',#256235,#256244,#256246,.T.); +#256244 = VERTEX_POINT('',#256245); +#256245 = CARTESIAN_POINT('',(201.261555,-42.053648,1.585)); +#256246 = LINE('',#256247,#256248); +#256247 = CARTESIAN_POINT('',(201.016055,-42.052919,1.585)); +#256248 = VECTOR('',#256249,1.); +#256249 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#256250 = ORIENTED_EDGE('',*,*,#256251,.T.); +#256251 = EDGE_CURVE('',#256244,#256252,#256254,.T.); +#256252 = VERTEX_POINT('',#256253); +#256253 = CARTESIAN_POINT('',(201.438675,-42.113178,1.585)); +#256254 = LINE('',#256255,#256256); +#256255 = CARTESIAN_POINT('',(201.261555,-42.053648,1.585)); +#256256 = VECTOR('',#256257,1.); +#256257 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#256258 = ORIENTED_EDGE('',*,*,#256259,.T.); +#256259 = EDGE_CURVE('',#256252,#256260,#256262,.T.); +#256260 = VERTEX_POINT('',#256261); +#256261 = CARTESIAN_POINT('',(201.555364,-42.23094,1.585)); +#256262 = LINE('',#256263,#256264); +#256263 = CARTESIAN_POINT('',(201.438675,-42.113178,1.585)); +#256264 = VECTOR('',#256265,1.); +#256265 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#256266 = ORIENTED_EDGE('',*,*,#256267,.T.); +#256267 = EDGE_CURVE('',#256260,#256268,#256270,.T.); +#256268 = VERTEX_POINT('',#256269); +#256269 = CARTESIAN_POINT('',(201.612625,-42.347824,1.585)); +#256270 = LINE('',#256271,#256272); +#256271 = CARTESIAN_POINT('',(201.555364,-42.23094,1.585)); +#256272 = VECTOR('',#256273,1.); +#256273 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#256274 = ORIENTED_EDGE('',*,*,#256275,.T.); +#256275 = EDGE_CURVE('',#256268,#256276,#256278,.T.); +#256276 = VERTEX_POINT('',#256277); +#256277 = CARTESIAN_POINT('',(201.662483,-42.55649,1.585)); +#256278 = LINE('',#256279,#256280); +#256279 = CARTESIAN_POINT('',(201.612625,-42.347824,1.585)); +#256280 = VECTOR('',#256281,1.); +#256281 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#256282 = ORIENTED_EDGE('',*,*,#256283,.T.); +#256283 = EDGE_CURVE('',#256276,#256284,#256286,.T.); +#256284 = VERTEX_POINT('',#256285); +#256285 = CARTESIAN_POINT('',(201.660244,-42.717537,1.585)); +#256286 = LINE('',#256287,#256288); +#256287 = CARTESIAN_POINT('',(201.662483,-42.55649,1.585)); +#256288 = VECTOR('',#256289,1.); +#256289 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#256290 = ORIENTED_EDGE('',*,*,#256291,.T.); +#256291 = EDGE_CURVE('',#256284,#256292,#256294,.T.); +#256292 = VERTEX_POINT('',#256293); +#256293 = CARTESIAN_POINT('',(201.606946,-42.923364,1.585)); +#256294 = LINE('',#256295,#256296); +#256295 = CARTESIAN_POINT('',(201.660244,-42.717537,1.585)); +#256296 = VECTOR('',#256297,1.); +#256297 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#256298 = ORIENTED_EDGE('',*,*,#256299,.T.); +#256299 = EDGE_CURVE('',#256292,#256300,#256302,.T.); +#256300 = VERTEX_POINT('',#256301); +#256301 = CARTESIAN_POINT('',(201.549996,-43.032344,1.585)); +#256302 = LINE('',#256303,#256304); +#256303 = CARTESIAN_POINT('',(201.606946,-42.923364,1.585)); +#256304 = VECTOR('',#256305,1.); +#256305 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#256306 = ORIENTED_EDGE('',*,*,#256307,.T.); +#256307 = EDGE_CURVE('',#256300,#256308,#256310,.T.); +#256308 = VERTEX_POINT('',#256309); +#256309 = CARTESIAN_POINT('',(201.434149,-43.145457,1.585)); +#256310 = LINE('',#256311,#256312); +#256311 = CARTESIAN_POINT('',(201.549996,-43.032344,1.585)); +#256312 = VECTOR('',#256313,1.); +#256313 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#256314 = ORIENTED_EDGE('',*,*,#256315,.T.); +#256315 = EDGE_CURVE('',#256308,#256316,#256318,.T.); +#256316 = VERTEX_POINT('',#256317); +#256317 = CARTESIAN_POINT('',(201.261555,-43.202189,1.585)); +#256318 = LINE('',#256319,#256320); +#256319 = CARTESIAN_POINT('',(201.434149,-43.145457,1.585)); +#256320 = VECTOR('',#256321,1.); +#256321 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#256322 = ORIENTED_EDGE('',*,*,#256323,.T.); +#256323 = EDGE_CURVE('',#256316,#256324,#256326,.T.); +#256324 = VERTEX_POINT('',#256325); +#256325 = CARTESIAN_POINT('',(201.001423,-43.201478,1.585)); +#256326 = LINE('',#256327,#256328); +#256327 = CARTESIAN_POINT('',(201.261555,-43.202189,1.585)); +#256328 = VECTOR('',#256329,1.); +#256329 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#256330 = ORIENTED_EDGE('',*,*,#256331,.T.); +#256331 = EDGE_CURVE('',#256324,#256332,#256334,.T.); +#256332 = VERTEX_POINT('',#256333); +#256333 = CARTESIAN_POINT('',(200.941055,-43.127919,1.585)); +#256334 = CIRCLE('',#256335,7.500074938991E-02); +#256335 = AXIS2_PLACEMENT_3D('',#256336,#256337,#256338); +#256336 = CARTESIAN_POINT('',(201.01605574938,-43.12791853389,1.585)); +#256337 = DIRECTION('',(0.,0.,-1.)); +#256338 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#256339 = ORIENTED_EDGE('',*,*,#256340,.T.); +#256340 = EDGE_CURVE('',#256332,#256233,#256341,.T.); +#256341 = LINE('',#256342,#256343); +#256342 = CARTESIAN_POINT('',(200.941055,-43.127919,1.585)); +#256343 = VECTOR('',#256344,1.); +#256344 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256345 = FACE_BOUND('',#256346,.F.); +#256346 = EDGE_LOOP('',(#256347,#256357,#256365,#256373,#256381,#256389, + #256397,#256406,#256414,#256422)); +#256347 = ORIENTED_EDGE('',*,*,#256348,.T.); +#256348 = EDGE_CURVE('',#256349,#256351,#256353,.T.); +#256349 = VERTEX_POINT('',#256350); +#256350 = CARTESIAN_POINT('',(201.356493,-42.24109,1.585)); +#256351 = VERTEX_POINT('',#256352); +#256352 = CARTESIAN_POINT('',(201.24198,-42.202919,1.585)); +#256353 = LINE('',#256354,#256355); +#256354 = CARTESIAN_POINT('',(201.356493,-42.24109,1.585)); +#256355 = VECTOR('',#256356,1.); +#256356 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#256357 = ORIENTED_EDGE('',*,*,#256358,.T.); +#256358 = EDGE_CURVE('',#256351,#256359,#256361,.T.); +#256359 = VERTEX_POINT('',#256360); +#256360 = CARTESIAN_POINT('',(201.091055,-42.202919,1.585)); +#256361 = LINE('',#256362,#256363); +#256362 = CARTESIAN_POINT('',(201.24198,-42.202919,1.585)); +#256363 = VECTOR('',#256364,1.); +#256364 = DIRECTION('',(-1.,0.,0.)); +#256365 = ORIENTED_EDGE('',*,*,#256366,.T.); +#256366 = EDGE_CURVE('',#256359,#256367,#256369,.T.); +#256367 = VERTEX_POINT('',#256368); +#256368 = CARTESIAN_POINT('',(201.091055,-43.052919,1.585)); +#256369 = LINE('',#256370,#256371); +#256370 = CARTESIAN_POINT('',(201.091055,-42.202919,1.585)); +#256371 = VECTOR('',#256372,1.); +#256372 = DIRECTION('',(0.,-1.,0.)); +#256373 = ORIENTED_EDGE('',*,*,#256374,.T.); +#256374 = EDGE_CURVE('',#256367,#256375,#256377,.T.); +#256375 = VERTEX_POINT('',#256376); +#256376 = CARTESIAN_POINT('',(201.24198,-43.052919,1.585)); +#256377 = LINE('',#256378,#256379); +#256378 = CARTESIAN_POINT('',(201.091055,-43.052919,1.585)); +#256379 = VECTOR('',#256380,1.); +#256380 = DIRECTION('',(1.,0.,0.)); +#256381 = ORIENTED_EDGE('',*,*,#256382,.T.); +#256382 = EDGE_CURVE('',#256375,#256383,#256385,.T.); +#256383 = VERTEX_POINT('',#256384); +#256384 = CARTESIAN_POINT('',(201.356493,-43.014747,1.585)); +#256385 = LINE('',#256386,#256387); +#256386 = CARTESIAN_POINT('',(201.24198,-43.052919,1.585)); +#256387 = VECTOR('',#256388,1.); +#256388 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#256389 = ORIENTED_EDGE('',*,*,#256390,.T.); +#256390 = EDGE_CURVE('',#256383,#256391,#256393,.T.); +#256391 = VERTEX_POINT('',#256392); +#256392 = CARTESIAN_POINT('',(201.430605,-42.940634,1.585)); +#256393 = LINE('',#256394,#256395); +#256394 = CARTESIAN_POINT('',(201.356493,-43.014747,1.585)); +#256395 = VECTOR('',#256396,1.); +#256396 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#256397 = ORIENTED_EDGE('',*,*,#256398,.T.); +#256398 = EDGE_CURVE('',#256391,#256399,#256401,.T.); +#256399 = VERTEX_POINT('',#256400); +#256400 = CARTESIAN_POINT('',(201.512483,-42.565724,1.585)); +#256401 = CIRCLE('',#256402,0.611719141131); +#256402 = AXIS2_PLACEMENT_3D('',#256403,#256404,#256405); +#256403 = CARTESIAN_POINT('',(200.90407096224,-42.62924643649,1.585)); +#256404 = DIRECTION('',(0.,0.,1.)); +#256405 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#256406 = ORIENTED_EDGE('',*,*,#256407,.T.); +#256407 = EDGE_CURVE('',#256399,#256408,#256410,.T.); +#256408 = VERTEX_POINT('',#256409); +#256409 = CARTESIAN_POINT('',(201.469099,-42.39219,1.585)); +#256410 = LINE('',#256411,#256412); +#256411 = CARTESIAN_POINT('',(201.512483,-42.565724,1.585)); +#256412 = VECTOR('',#256413,1.); +#256413 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256414 = ORIENTED_EDGE('',*,*,#256415,.T.); +#256415 = EDGE_CURVE('',#256408,#256416,#256418,.T.); +#256416 = VERTEX_POINT('',#256417); +#256417 = CARTESIAN_POINT('',(201.430606,-42.315203,1.585)); +#256418 = LINE('',#256419,#256420); +#256419 = CARTESIAN_POINT('',(201.469099,-42.39219,1.585)); +#256420 = VECTOR('',#256421,1.); +#256421 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256422 = ORIENTED_EDGE('',*,*,#256423,.T.); +#256423 = EDGE_CURVE('',#256416,#256349,#256424,.T.); +#256424 = LINE('',#256425,#256426); +#256425 = CARTESIAN_POINT('',(201.430606,-42.315203,1.585)); +#256426 = VECTOR('',#256427,1.); +#256427 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256428 = PLANE('',#256429); +#256429 = AXIS2_PLACEMENT_3D('',#256430,#256431,#256432); +#256430 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256431 = DIRECTION('',(0.,0.,1.)); +#256432 = DIRECTION('',(1.,0.,-0.)); +#256433 = SHELL_BASED_SURFACE_MODEL('',(#256434)); +#256434 = OPEN_SHELL('',(#256435)); +#256435 = ADVANCED_FACE('',(#256436,#256552),#256635,.T.); +#256436 = FACE_BOUND('',#256437,.F.); +#256437 = EDGE_LOOP('',(#256438,#256449,#256457,#256465,#256473,#256481, + #256489,#256497,#256505,#256513,#256521,#256529,#256537,#256546)); +#256438 = ORIENTED_EDGE('',*,*,#256439,.T.); +#256439 = EDGE_CURVE('',#256440,#256442,#256444,.T.); +#256440 = VERTEX_POINT('',#256441); +#256441 = CARTESIAN_POINT('',(204.942496,-42.113287,1.585)); +#256442 = VERTEX_POINT('',#256443); +#256443 = CARTESIAN_POINT('',(205.016055,-42.052919,1.585)); +#256444 = CIRCLE('',#256445,7.500074938983E-02); +#256445 = AXIS2_PLACEMENT_3D('',#256446,#256447,#256448); +#256446 = CARTESIAN_POINT('',(205.01605546611,-42.12791974938,1.585)); +#256447 = DIRECTION('',(0.,0.,-1.)); +#256448 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256449 = ORIENTED_EDGE('',*,*,#256450,.T.); +#256450 = EDGE_CURVE('',#256442,#256451,#256453,.T.); +#256451 = VERTEX_POINT('',#256452); +#256452 = CARTESIAN_POINT('',(205.261555,-42.053648,1.585)); +#256453 = LINE('',#256454,#256455); +#256454 = CARTESIAN_POINT('',(205.016055,-42.052919,1.585)); +#256455 = VECTOR('',#256456,1.); +#256456 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#256457 = ORIENTED_EDGE('',*,*,#256458,.T.); +#256458 = EDGE_CURVE('',#256451,#256459,#256461,.T.); +#256459 = VERTEX_POINT('',#256460); +#256460 = CARTESIAN_POINT('',(205.438675,-42.113178,1.585)); +#256461 = LINE('',#256462,#256463); +#256462 = CARTESIAN_POINT('',(205.261555,-42.053648,1.585)); +#256463 = VECTOR('',#256464,1.); +#256464 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#256465 = ORIENTED_EDGE('',*,*,#256466,.T.); +#256466 = EDGE_CURVE('',#256459,#256467,#256469,.T.); +#256467 = VERTEX_POINT('',#256468); +#256468 = CARTESIAN_POINT('',(205.555364,-42.23094,1.585)); +#256469 = LINE('',#256470,#256471); +#256470 = CARTESIAN_POINT('',(205.438675,-42.113178,1.585)); +#256471 = VECTOR('',#256472,1.); +#256472 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#256473 = ORIENTED_EDGE('',*,*,#256474,.T.); +#256474 = EDGE_CURVE('',#256467,#256475,#256477,.T.); +#256475 = VERTEX_POINT('',#256476); +#256476 = CARTESIAN_POINT('',(205.612625,-42.347824,1.585)); +#256477 = LINE('',#256478,#256479); +#256478 = CARTESIAN_POINT('',(205.555364,-42.23094,1.585)); +#256479 = VECTOR('',#256480,1.); +#256480 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#256481 = ORIENTED_EDGE('',*,*,#256482,.T.); +#256482 = EDGE_CURVE('',#256475,#256483,#256485,.T.); +#256483 = VERTEX_POINT('',#256484); +#256484 = CARTESIAN_POINT('',(205.662483,-42.55649,1.585)); +#256485 = LINE('',#256486,#256487); +#256486 = CARTESIAN_POINT('',(205.612625,-42.347824,1.585)); +#256487 = VECTOR('',#256488,1.); +#256488 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#256489 = ORIENTED_EDGE('',*,*,#256490,.T.); +#256490 = EDGE_CURVE('',#256483,#256491,#256493,.T.); +#256491 = VERTEX_POINT('',#256492); +#256492 = CARTESIAN_POINT('',(205.660244,-42.717537,1.585)); +#256493 = LINE('',#256494,#256495); +#256494 = CARTESIAN_POINT('',(205.662483,-42.55649,1.585)); +#256495 = VECTOR('',#256496,1.); +#256496 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#256497 = ORIENTED_EDGE('',*,*,#256498,.T.); +#256498 = EDGE_CURVE('',#256491,#256499,#256501,.T.); +#256499 = VERTEX_POINT('',#256500); +#256500 = CARTESIAN_POINT('',(205.606946,-42.923364,1.585)); +#256501 = LINE('',#256502,#256503); +#256502 = CARTESIAN_POINT('',(205.660244,-42.717537,1.585)); +#256503 = VECTOR('',#256504,1.); +#256504 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#256505 = ORIENTED_EDGE('',*,*,#256506,.T.); +#256506 = EDGE_CURVE('',#256499,#256507,#256509,.T.); +#256507 = VERTEX_POINT('',#256508); +#256508 = CARTESIAN_POINT('',(205.549996,-43.032344,1.585)); +#256509 = LINE('',#256510,#256511); +#256510 = CARTESIAN_POINT('',(205.606946,-42.923364,1.585)); +#256511 = VECTOR('',#256512,1.); +#256512 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#256513 = ORIENTED_EDGE('',*,*,#256514,.T.); +#256514 = EDGE_CURVE('',#256507,#256515,#256517,.T.); +#256515 = VERTEX_POINT('',#256516); +#256516 = CARTESIAN_POINT('',(205.434149,-43.145457,1.585)); +#256517 = LINE('',#256518,#256519); +#256518 = CARTESIAN_POINT('',(205.549996,-43.032344,1.585)); +#256519 = VECTOR('',#256520,1.); +#256520 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#256521 = ORIENTED_EDGE('',*,*,#256522,.T.); +#256522 = EDGE_CURVE('',#256515,#256523,#256525,.T.); +#256523 = VERTEX_POINT('',#256524); +#256524 = CARTESIAN_POINT('',(205.261555,-43.202189,1.585)); +#256525 = LINE('',#256526,#256527); +#256526 = CARTESIAN_POINT('',(205.434149,-43.145457,1.585)); +#256527 = VECTOR('',#256528,1.); +#256528 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#256529 = ORIENTED_EDGE('',*,*,#256530,.T.); +#256530 = EDGE_CURVE('',#256523,#256531,#256533,.T.); +#256531 = VERTEX_POINT('',#256532); +#256532 = CARTESIAN_POINT('',(205.001423,-43.201478,1.585)); +#256533 = LINE('',#256534,#256535); +#256534 = CARTESIAN_POINT('',(205.261555,-43.202189,1.585)); +#256535 = VECTOR('',#256536,1.); +#256536 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#256537 = ORIENTED_EDGE('',*,*,#256538,.T.); +#256538 = EDGE_CURVE('',#256531,#256539,#256541,.T.); +#256539 = VERTEX_POINT('',#256540); +#256540 = CARTESIAN_POINT('',(204.941055,-43.127919,1.585)); +#256541 = CIRCLE('',#256542,7.500074938991E-02); +#256542 = AXIS2_PLACEMENT_3D('',#256543,#256544,#256545); +#256543 = CARTESIAN_POINT('',(205.01605574938,-43.12791853389,1.585)); +#256544 = DIRECTION('',(0.,0.,-1.)); +#256545 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#256546 = ORIENTED_EDGE('',*,*,#256547,.T.); +#256547 = EDGE_CURVE('',#256539,#256440,#256548,.T.); +#256548 = LINE('',#256549,#256550); +#256549 = CARTESIAN_POINT('',(204.941055,-43.127919,1.585)); +#256550 = VECTOR('',#256551,1.); +#256551 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256552 = FACE_BOUND('',#256553,.F.); +#256553 = EDGE_LOOP('',(#256554,#256564,#256572,#256580,#256588,#256596, + #256604,#256613,#256621,#256629)); +#256554 = ORIENTED_EDGE('',*,*,#256555,.T.); +#256555 = EDGE_CURVE('',#256556,#256558,#256560,.T.); +#256556 = VERTEX_POINT('',#256557); +#256557 = CARTESIAN_POINT('',(205.356493,-42.24109,1.585)); +#256558 = VERTEX_POINT('',#256559); +#256559 = CARTESIAN_POINT('',(205.24198,-42.202919,1.585)); +#256560 = LINE('',#256561,#256562); +#256561 = CARTESIAN_POINT('',(205.356493,-42.24109,1.585)); +#256562 = VECTOR('',#256563,1.); +#256563 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#256564 = ORIENTED_EDGE('',*,*,#256565,.T.); +#256565 = EDGE_CURVE('',#256558,#256566,#256568,.T.); +#256566 = VERTEX_POINT('',#256567); +#256567 = CARTESIAN_POINT('',(205.091055,-42.202919,1.585)); +#256568 = LINE('',#256569,#256570); +#256569 = CARTESIAN_POINT('',(205.24198,-42.202919,1.585)); +#256570 = VECTOR('',#256571,1.); +#256571 = DIRECTION('',(-1.,0.,0.)); +#256572 = ORIENTED_EDGE('',*,*,#256573,.T.); +#256573 = EDGE_CURVE('',#256566,#256574,#256576,.T.); +#256574 = VERTEX_POINT('',#256575); +#256575 = CARTESIAN_POINT('',(205.091055,-43.052919,1.585)); +#256576 = LINE('',#256577,#256578); +#256577 = CARTESIAN_POINT('',(205.091055,-42.202919,1.585)); +#256578 = VECTOR('',#256579,1.); +#256579 = DIRECTION('',(0.,-1.,0.)); +#256580 = ORIENTED_EDGE('',*,*,#256581,.T.); +#256581 = EDGE_CURVE('',#256574,#256582,#256584,.T.); +#256582 = VERTEX_POINT('',#256583); +#256583 = CARTESIAN_POINT('',(205.24198,-43.052919,1.585)); +#256584 = LINE('',#256585,#256586); +#256585 = CARTESIAN_POINT('',(205.091055,-43.052919,1.585)); +#256586 = VECTOR('',#256587,1.); +#256587 = DIRECTION('',(1.,0.,0.)); +#256588 = ORIENTED_EDGE('',*,*,#256589,.T.); +#256589 = EDGE_CURVE('',#256582,#256590,#256592,.T.); +#256590 = VERTEX_POINT('',#256591); +#256591 = CARTESIAN_POINT('',(205.356493,-43.014747,1.585)); +#256592 = LINE('',#256593,#256594); +#256593 = CARTESIAN_POINT('',(205.24198,-43.052919,1.585)); +#256594 = VECTOR('',#256595,1.); +#256595 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#256596 = ORIENTED_EDGE('',*,*,#256597,.T.); +#256597 = EDGE_CURVE('',#256590,#256598,#256600,.T.); +#256598 = VERTEX_POINT('',#256599); +#256599 = CARTESIAN_POINT('',(205.430605,-42.940634,1.585)); +#256600 = LINE('',#256601,#256602); +#256601 = CARTESIAN_POINT('',(205.356493,-43.014747,1.585)); +#256602 = VECTOR('',#256603,1.); +#256603 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#256604 = ORIENTED_EDGE('',*,*,#256605,.T.); +#256605 = EDGE_CURVE('',#256598,#256606,#256608,.T.); +#256606 = VERTEX_POINT('',#256607); +#256607 = CARTESIAN_POINT('',(205.512483,-42.565724,1.585)); +#256608 = CIRCLE('',#256609,0.611719141131); +#256609 = AXIS2_PLACEMENT_3D('',#256610,#256611,#256612); +#256610 = CARTESIAN_POINT('',(204.90407096224,-42.62924643649,1.585)); +#256611 = DIRECTION('',(0.,0.,1.)); +#256612 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#256613 = ORIENTED_EDGE('',*,*,#256614,.T.); +#256614 = EDGE_CURVE('',#256606,#256615,#256617,.T.); +#256615 = VERTEX_POINT('',#256616); +#256616 = CARTESIAN_POINT('',(205.469099,-42.39219,1.585)); +#256617 = LINE('',#256618,#256619); +#256618 = CARTESIAN_POINT('',(205.512483,-42.565724,1.585)); +#256619 = VECTOR('',#256620,1.); +#256620 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256621 = ORIENTED_EDGE('',*,*,#256622,.T.); +#256622 = EDGE_CURVE('',#256615,#256623,#256625,.T.); +#256623 = VERTEX_POINT('',#256624); +#256624 = CARTESIAN_POINT('',(205.430606,-42.315203,1.585)); +#256625 = LINE('',#256626,#256627); +#256626 = CARTESIAN_POINT('',(205.469099,-42.39219,1.585)); +#256627 = VECTOR('',#256628,1.); +#256628 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256629 = ORIENTED_EDGE('',*,*,#256630,.T.); +#256630 = EDGE_CURVE('',#256623,#256556,#256631,.T.); +#256631 = LINE('',#256632,#256633); +#256632 = CARTESIAN_POINT('',(205.430606,-42.315203,1.585)); +#256633 = VECTOR('',#256634,1.); +#256634 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256635 = PLANE('',#256636); +#256636 = AXIS2_PLACEMENT_3D('',#256637,#256638,#256639); +#256637 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256638 = DIRECTION('',(0.,0.,1.)); +#256639 = DIRECTION('',(1.,0.,-0.)); +#256640 = SHELL_BASED_SURFACE_MODEL('',(#256641)); +#256641 = OPEN_SHELL('',(#256642)); +#256642 = ADVANCED_FACE('',(#256643,#256761,#256828),#256880,.T.); +#256643 = FACE_BOUND('',#256644,.F.); +#256644 = EDGE_LOOP('',(#256645,#256656,#256664,#256673,#256681,#256689, + #256697,#256705,#256713,#256722,#256730,#256739,#256747,#256755)); +#256645 = ORIENTED_EDGE('',*,*,#256646,.T.); +#256646 = EDGE_CURVE('',#256647,#256649,#256651,.T.); +#256647 = VERTEX_POINT('',#256648); +#256648 = CARTESIAN_POINT('',(193.942496,-42.113287,1.585)); +#256649 = VERTEX_POINT('',#256650); +#256650 = CARTESIAN_POINT('',(194.016055,-42.052919,1.585)); +#256651 = CIRCLE('',#256652,7.500074938983E-02); +#256652 = AXIS2_PLACEMENT_3D('',#256653,#256654,#256655); +#256653 = CARTESIAN_POINT('',(194.01605546611,-42.12791974938,1.585)); +#256654 = DIRECTION('',(0.,0.,-1.)); +#256655 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256656 = ORIENTED_EDGE('',*,*,#256657,.T.); +#256657 = EDGE_CURVE('',#256649,#256658,#256660,.T.); +#256658 = VERTEX_POINT('',#256659); +#256659 = CARTESIAN_POINT('',(194.36402,-42.05436,1.585)); +#256660 = LINE('',#256661,#256662); +#256661 = CARTESIAN_POINT('',(194.016055,-42.052919,1.585)); +#256662 = VECTOR('',#256663,1.); +#256663 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#256664 = ORIENTED_EDGE('',*,*,#256665,.T.); +#256665 = EDGE_CURVE('',#256658,#256666,#256668,.T.); +#256666 = VERTEX_POINT('',#256667); +#256667 = CARTESIAN_POINT('',(194.613423,-42.303763,1.585)); +#256668 = CIRCLE('',#256669,0.347870264855); +#256669 = AXIS2_PLACEMENT_3D('',#256670,#256671,#256672); +#256670 = CARTESIAN_POINT('',(194.27669226502,-42.39109073497,1.585)); +#256671 = DIRECTION('',(0.,0.,-1.)); +#256672 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#256673 = ORIENTED_EDGE('',*,*,#256674,.T.); +#256674 = EDGE_CURVE('',#256666,#256675,#256677,.T.); +#256675 = VERTEX_POINT('',#256676); +#256676 = CARTESIAN_POINT('',(194.612201,-42.433443,1.585)); +#256677 = LINE('',#256678,#256679); +#256678 = CARTESIAN_POINT('',(194.613423,-42.303763,1.585)); +#256679 = VECTOR('',#256680,1.); +#256680 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#256681 = ORIENTED_EDGE('',*,*,#256682,.T.); +#256682 = EDGE_CURVE('',#256675,#256683,#256685,.T.); +#256683 = VERTEX_POINT('',#256684); +#256684 = CARTESIAN_POINT('',(194.549996,-42.556154,1.585)); +#256685 = LINE('',#256686,#256687); +#256686 = CARTESIAN_POINT('',(194.612201,-42.433443,1.585)); +#256687 = VECTOR('',#256688,1.); +#256688 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#256689 = ORIENTED_EDGE('',*,*,#256690,.T.); +#256690 = EDGE_CURVE('',#256683,#256691,#256693,.T.); +#256691 = VERTEX_POINT('',#256692); +#256692 = CARTESIAN_POINT('',(194.523319,-42.583862,1.585)); +#256693 = LINE('',#256694,#256695); +#256694 = CARTESIAN_POINT('',(194.549996,-42.556154,1.585)); +#256695 = VECTOR('',#256696,1.); +#256696 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#256697 = ORIENTED_EDGE('',*,*,#256698,.T.); +#256698 = EDGE_CURVE('',#256691,#256699,#256701,.T.); +#256699 = VERTEX_POINT('',#256700); +#256700 = CARTESIAN_POINT('',(194.545278,-42.598695,1.585)); +#256701 = LINE('',#256702,#256703); +#256702 = CARTESIAN_POINT('',(194.523319,-42.583862,1.585)); +#256703 = VECTOR('',#256704,1.); +#256704 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#256705 = ORIENTED_EDGE('',*,*,#256706,.T.); +#256706 = EDGE_CURVE('',#256699,#256707,#256709,.T.); +#256707 = VERTEX_POINT('',#256708); +#256708 = CARTESIAN_POINT('',(194.606946,-42.665806,1.585)); +#256709 = LINE('',#256710,#256711); +#256710 = CARTESIAN_POINT('',(194.545278,-42.598695,1.585)); +#256711 = VECTOR('',#256712,1.); +#256712 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#256713 = ORIENTED_EDGE('',*,*,#256714,.T.); +#256714 = EDGE_CURVE('',#256707,#256715,#256717,.T.); +#256715 = VERTEX_POINT('',#256716); +#256716 = CARTESIAN_POINT('',(194.597615,-43.079963,1.585)); +#256717 = CIRCLE('',#256718,0.341850333486); +#256718 = AXIS2_PLACEMENT_3D('',#256719,#256720,#256721); +#256719 = CARTESIAN_POINT('',(194.33039659864,-42.86675892761,1.585)); +#256720 = DIRECTION('',(0.,0.,-1.)); +#256721 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#256722 = ORIENTED_EDGE('',*,*,#256723,.T.); +#256723 = EDGE_CURVE('',#256715,#256724,#256726,.T.); +#256724 = VERTEX_POINT('',#256725); +#256725 = CARTESIAN_POINT('',(194.532085,-43.143417,1.585)); +#256726 = LINE('',#256727,#256728); +#256727 = CARTESIAN_POINT('',(194.597615,-43.079963,1.585)); +#256728 = VECTOR('',#256729,1.); +#256729 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#256730 = ORIENTED_EDGE('',*,*,#256731,.T.); +#256731 = EDGE_CURVE('',#256724,#256732,#256734,.T.); +#256732 = VERTEX_POINT('',#256733); +#256733 = CARTESIAN_POINT('',(193.974387,-43.190279,1.585)); +#256734 = CIRCLE('',#256735,0.612118292739); +#256735 = AXIS2_PLACEMENT_3D('',#256736,#256737,#256738); +#256736 = CARTESIAN_POINT('',(194.20765114383,-42.62434910725,1.585)); +#256737 = DIRECTION('',(-0.,0.,-1.)); +#256738 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#256739 = ORIENTED_EDGE('',*,*,#256740,.T.); +#256740 = EDGE_CURVE('',#256732,#256741,#256743,.T.); +#256741 = VERTEX_POINT('',#256742); +#256742 = CARTESIAN_POINT('',(193.953695,-43.169587,1.585)); +#256743 = LINE('',#256744,#256745); +#256744 = CARTESIAN_POINT('',(193.974387,-43.190279,1.585)); +#256745 = VECTOR('',#256746,1.); +#256746 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#256747 = ORIENTED_EDGE('',*,*,#256748,.T.); +#256748 = EDGE_CURVE('',#256741,#256749,#256751,.T.); +#256749 = VERTEX_POINT('',#256750); +#256750 = CARTESIAN_POINT('',(193.941055,-43.127919,1.585)); +#256751 = LINE('',#256752,#256753); +#256752 = CARTESIAN_POINT('',(193.953695,-43.169587,1.585)); +#256753 = VECTOR('',#256754,1.); +#256754 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#256755 = ORIENTED_EDGE('',*,*,#256756,.T.); +#256756 = EDGE_CURVE('',#256749,#256647,#256757,.T.); +#256757 = LINE('',#256758,#256759); +#256758 = CARTESIAN_POINT('',(193.941055,-43.127919,1.585)); +#256759 = VECTOR('',#256760,1.); +#256760 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256761 = FACE_BOUND('',#256762,.F.); +#256762 = EDGE_LOOP('',(#256763,#256773,#256781,#256789,#256797,#256806, + #256814,#256822)); +#256763 = ORIENTED_EDGE('',*,*,#256764,.T.); +#256764 = EDGE_CURVE('',#256765,#256767,#256769,.T.); +#256765 = VERTEX_POINT('',#256766); +#256766 = CARTESIAN_POINT('',(194.451731,-42.71728,1.585)); +#256767 = VERTEX_POINT('',#256768); +#256768 = CARTESIAN_POINT('',(194.337218,-42.679109,1.585)); +#256769 = LINE('',#256770,#256771); +#256770 = CARTESIAN_POINT('',(194.451731,-42.71728,1.585)); +#256771 = VECTOR('',#256772,1.); +#256772 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#256773 = ORIENTED_EDGE('',*,*,#256774,.T.); +#256774 = EDGE_CURVE('',#256767,#256775,#256777,.T.); +#256775 = VERTEX_POINT('',#256776); +#256776 = CARTESIAN_POINT('',(194.091055,-42.679109,1.585)); +#256777 = LINE('',#256778,#256779); +#256778 = CARTESIAN_POINT('',(194.337218,-42.679109,1.585)); +#256779 = VECTOR('',#256780,1.); +#256780 = DIRECTION('',(-1.,0.,0.)); +#256781 = ORIENTED_EDGE('',*,*,#256782,.T.); +#256782 = EDGE_CURVE('',#256775,#256783,#256785,.T.); +#256783 = VERTEX_POINT('',#256784); +#256784 = CARTESIAN_POINT('',(194.091055,-43.052919,1.585)); +#256785 = LINE('',#256786,#256787); +#256786 = CARTESIAN_POINT('',(194.091055,-42.679109,1.585)); +#256787 = VECTOR('',#256788,1.); +#256788 = DIRECTION('',(0.,-1.,0.)); +#256789 = ORIENTED_EDGE('',*,*,#256790,.T.); +#256790 = EDGE_CURVE('',#256783,#256791,#256793,.T.); +#256791 = VERTEX_POINT('',#256792); +#256792 = CARTESIAN_POINT('',(194.379302,-43.052919,1.585)); +#256793 = LINE('',#256794,#256795); +#256794 = CARTESIAN_POINT('',(194.091055,-43.052919,1.585)); +#256795 = VECTOR('',#256796,1.); +#256796 = DIRECTION('',(1.,0.,0.)); +#256797 = ORIENTED_EDGE('',*,*,#256798,.T.); +#256798 = EDGE_CURVE('',#256791,#256799,#256801,.T.); +#256799 = VERTEX_POINT('',#256800); +#256800 = CARTESIAN_POINT('',(194.512483,-42.919737,1.585)); +#256801 = CIRCLE('',#256802,0.186867760544); +#256802 = AXIS2_PLACEMENT_3D('',#256803,#256804,#256805); +#256803 = CARTESIAN_POINT('',(194.33176296928,-42.87219932622,1.585)); +#256804 = DIRECTION('',(0.,0.,1.)); +#256805 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#256806 = ORIENTED_EDGE('',*,*,#256807,.T.); +#256807 = EDGE_CURVE('',#256799,#256808,#256810,.T.); +#256808 = VERTEX_POINT('',#256809); +#256809 = CARTESIAN_POINT('',(194.512483,-42.81229,1.585)); +#256810 = LINE('',#256811,#256812); +#256811 = CARTESIAN_POINT('',(194.512483,-42.919737,1.585)); +#256812 = VECTOR('',#256813,1.); +#256813 = DIRECTION('',(0.,1.,0.)); +#256814 = ORIENTED_EDGE('',*,*,#256815,.T.); +#256815 = EDGE_CURVE('',#256808,#256816,#256818,.T.); +#256816 = VERTEX_POINT('',#256817); +#256817 = CARTESIAN_POINT('',(194.478225,-42.743774,1.585)); +#256818 = LINE('',#256819,#256820); +#256819 = CARTESIAN_POINT('',(194.512483,-42.81229,1.585)); +#256820 = VECTOR('',#256821,1.); +#256821 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#256822 = ORIENTED_EDGE('',*,*,#256823,.T.); +#256823 = EDGE_CURVE('',#256816,#256765,#256824,.T.); +#256824 = LINE('',#256825,#256826); +#256825 = CARTESIAN_POINT('',(194.478225,-42.743774,1.585)); +#256826 = VECTOR('',#256827,1.); +#256827 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256828 = FACE_BOUND('',#256829,.F.); +#256829 = EDGE_LOOP('',(#256830,#256841,#256849,#256857,#256865,#256874) + ); +#256830 = ORIENTED_EDGE('',*,*,#256831,.T.); +#256831 = EDGE_CURVE('',#256832,#256834,#256836,.T.); +#256832 = VERTEX_POINT('',#256833); +#256833 = CARTESIAN_POINT('',(194.464864,-42.3361,1.585)); +#256834 = VERTEX_POINT('',#256835); +#256835 = CARTESIAN_POINT('',(194.331683,-42.202919,1.585)); +#256836 = CIRCLE('',#256837,0.18686440374); +#256837 = AXIS2_PLACEMENT_3D('',#256838,#256839,#256840); +#256838 = CARTESIAN_POINT('',(194.284147,-42.383636,1.585)); +#256839 = DIRECTION('',(0.,0.,1.)); +#256840 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#256841 = ORIENTED_EDGE('',*,*,#256842,.T.); +#256842 = EDGE_CURVE('',#256834,#256843,#256845,.T.); +#256843 = VERTEX_POINT('',#256844); +#256844 = CARTESIAN_POINT('',(194.091055,-42.202919,1.585)); +#256845 = LINE('',#256846,#256847); +#256846 = CARTESIAN_POINT('',(194.331683,-42.202919,1.585)); +#256847 = VECTOR('',#256848,1.); +#256848 = DIRECTION('',(-1.,0.,0.)); +#256849 = ORIENTED_EDGE('',*,*,#256850,.T.); +#256850 = EDGE_CURVE('',#256843,#256851,#256853,.T.); +#256851 = VERTEX_POINT('',#256852); +#256852 = CARTESIAN_POINT('',(194.091055,-42.529109,1.585)); +#256853 = LINE('',#256854,#256855); +#256854 = CARTESIAN_POINT('',(194.091055,-42.202919,1.585)); +#256855 = VECTOR('',#256856,1.); +#256856 = DIRECTION('',(0.,-1.,0.)); +#256857 = ORIENTED_EDGE('',*,*,#256858,.T.); +#256858 = EDGE_CURVE('',#256851,#256859,#256861,.T.); +#256859 = VERTEX_POINT('',#256860); +#256860 = CARTESIAN_POINT('',(194.331683,-42.529109,1.585)); +#256861 = LINE('',#256862,#256863); +#256862 = CARTESIAN_POINT('',(194.091055,-42.529109,1.585)); +#256863 = VECTOR('',#256864,1.); +#256864 = DIRECTION('',(1.,0.,0.)); +#256865 = ORIENTED_EDGE('',*,*,#256866,.T.); +#256866 = EDGE_CURVE('',#256859,#256867,#256869,.T.); +#256867 = VERTEX_POINT('',#256868); +#256868 = CARTESIAN_POINT('',(194.464864,-42.395928,1.585)); +#256869 = CIRCLE('',#256870,0.18686440374); +#256870 = AXIS2_PLACEMENT_3D('',#256871,#256872,#256873); +#256871 = CARTESIAN_POINT('',(194.284147,-42.348392,1.585)); +#256872 = DIRECTION('',(0.,0.,1.)); +#256873 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#256874 = ORIENTED_EDGE('',*,*,#256875,.T.); +#256875 = EDGE_CURVE('',#256867,#256832,#256876,.T.); +#256876 = LINE('',#256877,#256878); +#256877 = CARTESIAN_POINT('',(194.464864,-42.395928,1.585)); +#256878 = VECTOR('',#256879,1.); +#256879 = DIRECTION('',(0.,1.,0.)); +#256880 = PLANE('',#256881); +#256881 = AXIS2_PLACEMENT_3D('',#256882,#256883,#256884); +#256882 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256883 = DIRECTION('',(0.,0.,1.)); +#256884 = DIRECTION('',(1.,0.,-0.)); +#256885 = SHELL_BASED_SURFACE_MODEL('',(#256886)); +#256886 = OPEN_SHELL('',(#256887)); +#256887 = ADVANCED_FACE('',(#256888,#257006,#257073),#257125,.T.); +#256888 = FACE_BOUND('',#256889,.F.); +#256889 = EDGE_LOOP('',(#256890,#256901,#256909,#256918,#256926,#256934, + #256942,#256950,#256958,#256967,#256975,#256984,#256992,#257000)); +#256890 = ORIENTED_EDGE('',*,*,#256891,.T.); +#256891 = EDGE_CURVE('',#256892,#256894,#256896,.T.); +#256892 = VERTEX_POINT('',#256893); +#256893 = CARTESIAN_POINT('',(197.942496,-42.113287,1.585)); +#256894 = VERTEX_POINT('',#256895); +#256895 = CARTESIAN_POINT('',(198.016055,-42.052919,1.585)); +#256896 = CIRCLE('',#256897,7.500074938983E-02); +#256897 = AXIS2_PLACEMENT_3D('',#256898,#256899,#256900); +#256898 = CARTESIAN_POINT('',(198.01605546611,-42.12791974938,1.585)); +#256899 = DIRECTION('',(0.,0.,-1.)); +#256900 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256901 = ORIENTED_EDGE('',*,*,#256902,.T.); +#256902 = EDGE_CURVE('',#256894,#256903,#256905,.T.); +#256903 = VERTEX_POINT('',#256904); +#256904 = CARTESIAN_POINT('',(198.36402,-42.05436,1.585)); +#256905 = LINE('',#256906,#256907); +#256906 = CARTESIAN_POINT('',(198.016055,-42.052919,1.585)); +#256907 = VECTOR('',#256908,1.); +#256908 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#256909 = ORIENTED_EDGE('',*,*,#256910,.T.); +#256910 = EDGE_CURVE('',#256903,#256911,#256913,.T.); +#256911 = VERTEX_POINT('',#256912); +#256912 = CARTESIAN_POINT('',(198.613423,-42.303763,1.585)); +#256913 = CIRCLE('',#256914,0.347870264855); +#256914 = AXIS2_PLACEMENT_3D('',#256915,#256916,#256917); +#256915 = CARTESIAN_POINT('',(198.27669226502,-42.39109073497,1.585)); +#256916 = DIRECTION('',(0.,0.,-1.)); +#256917 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#256918 = ORIENTED_EDGE('',*,*,#256919,.T.); +#256919 = EDGE_CURVE('',#256911,#256920,#256922,.T.); +#256920 = VERTEX_POINT('',#256921); +#256921 = CARTESIAN_POINT('',(198.612201,-42.433443,1.585)); +#256922 = LINE('',#256923,#256924); +#256923 = CARTESIAN_POINT('',(198.613423,-42.303763,1.585)); +#256924 = VECTOR('',#256925,1.); +#256925 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#256926 = ORIENTED_EDGE('',*,*,#256927,.T.); +#256927 = EDGE_CURVE('',#256920,#256928,#256930,.T.); +#256928 = VERTEX_POINT('',#256929); +#256929 = CARTESIAN_POINT('',(198.549996,-42.556154,1.585)); +#256930 = LINE('',#256931,#256932); +#256931 = CARTESIAN_POINT('',(198.612201,-42.433443,1.585)); +#256932 = VECTOR('',#256933,1.); +#256933 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#256934 = ORIENTED_EDGE('',*,*,#256935,.T.); +#256935 = EDGE_CURVE('',#256928,#256936,#256938,.T.); +#256936 = VERTEX_POINT('',#256937); +#256937 = CARTESIAN_POINT('',(198.523319,-42.583862,1.585)); +#256938 = LINE('',#256939,#256940); +#256939 = CARTESIAN_POINT('',(198.549996,-42.556154,1.585)); +#256940 = VECTOR('',#256941,1.); +#256941 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#256942 = ORIENTED_EDGE('',*,*,#256943,.T.); +#256943 = EDGE_CURVE('',#256936,#256944,#256946,.T.); +#256944 = VERTEX_POINT('',#256945); +#256945 = CARTESIAN_POINT('',(198.545278,-42.598695,1.585)); +#256946 = LINE('',#256947,#256948); +#256947 = CARTESIAN_POINT('',(198.523319,-42.583862,1.585)); +#256948 = VECTOR('',#256949,1.); +#256949 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#256950 = ORIENTED_EDGE('',*,*,#256951,.T.); +#256951 = EDGE_CURVE('',#256944,#256952,#256954,.T.); +#256952 = VERTEX_POINT('',#256953); +#256953 = CARTESIAN_POINT('',(198.606946,-42.665806,1.585)); +#256954 = LINE('',#256955,#256956); +#256955 = CARTESIAN_POINT('',(198.545278,-42.598695,1.585)); +#256956 = VECTOR('',#256957,1.); +#256957 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#256958 = ORIENTED_EDGE('',*,*,#256959,.T.); +#256959 = EDGE_CURVE('',#256952,#256960,#256962,.T.); +#256960 = VERTEX_POINT('',#256961); +#256961 = CARTESIAN_POINT('',(198.597615,-43.079963,1.585)); +#256962 = CIRCLE('',#256963,0.341850333486); +#256963 = AXIS2_PLACEMENT_3D('',#256964,#256965,#256966); +#256964 = CARTESIAN_POINT('',(198.33039659864,-42.86675892761,1.585)); +#256965 = DIRECTION('',(0.,0.,-1.)); +#256966 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#256967 = ORIENTED_EDGE('',*,*,#256968,.T.); +#256968 = EDGE_CURVE('',#256960,#256969,#256971,.T.); +#256969 = VERTEX_POINT('',#256970); +#256970 = CARTESIAN_POINT('',(198.532085,-43.143417,1.585)); +#256971 = LINE('',#256972,#256973); +#256972 = CARTESIAN_POINT('',(198.597615,-43.079963,1.585)); +#256973 = VECTOR('',#256974,1.); +#256974 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#256975 = ORIENTED_EDGE('',*,*,#256976,.T.); +#256976 = EDGE_CURVE('',#256969,#256977,#256979,.T.); +#256977 = VERTEX_POINT('',#256978); +#256978 = CARTESIAN_POINT('',(197.974387,-43.190279,1.585)); +#256979 = CIRCLE('',#256980,0.612118292739); +#256980 = AXIS2_PLACEMENT_3D('',#256981,#256982,#256983); +#256981 = CARTESIAN_POINT('',(198.20765114383,-42.62434910725,1.585)); +#256982 = DIRECTION('',(-0.,0.,-1.)); +#256983 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#256984 = ORIENTED_EDGE('',*,*,#256985,.T.); +#256985 = EDGE_CURVE('',#256977,#256986,#256988,.T.); +#256986 = VERTEX_POINT('',#256987); +#256987 = CARTESIAN_POINT('',(197.953695,-43.169587,1.585)); +#256988 = LINE('',#256989,#256990); +#256989 = CARTESIAN_POINT('',(197.974387,-43.190279,1.585)); +#256990 = VECTOR('',#256991,1.); +#256991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#256992 = ORIENTED_EDGE('',*,*,#256993,.T.); +#256993 = EDGE_CURVE('',#256986,#256994,#256996,.T.); +#256994 = VERTEX_POINT('',#256995); +#256995 = CARTESIAN_POINT('',(197.941055,-43.127919,1.585)); +#256996 = LINE('',#256997,#256998); +#256997 = CARTESIAN_POINT('',(197.953695,-43.169587,1.585)); +#256998 = VECTOR('',#256999,1.); +#256999 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#257000 = ORIENTED_EDGE('',*,*,#257001,.T.); +#257001 = EDGE_CURVE('',#256994,#256892,#257002,.T.); +#257002 = LINE('',#257003,#257004); +#257003 = CARTESIAN_POINT('',(197.941055,-43.127919,1.585)); +#257004 = VECTOR('',#257005,1.); +#257005 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#257006 = FACE_BOUND('',#257007,.F.); +#257007 = EDGE_LOOP('',(#257008,#257018,#257026,#257034,#257042,#257051, + #257059,#257067)); +#257008 = ORIENTED_EDGE('',*,*,#257009,.T.); +#257009 = EDGE_CURVE('',#257010,#257012,#257014,.T.); +#257010 = VERTEX_POINT('',#257011); +#257011 = CARTESIAN_POINT('',(198.451731,-42.71728,1.585)); +#257012 = VERTEX_POINT('',#257013); +#257013 = CARTESIAN_POINT('',(198.337218,-42.679109,1.585)); +#257014 = LINE('',#257015,#257016); +#257015 = CARTESIAN_POINT('',(198.451731,-42.71728,1.585)); +#257016 = VECTOR('',#257017,1.); +#257017 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#257018 = ORIENTED_EDGE('',*,*,#257019,.T.); +#257019 = EDGE_CURVE('',#257012,#257020,#257022,.T.); +#257020 = VERTEX_POINT('',#257021); +#257021 = CARTESIAN_POINT('',(198.091055,-42.679109,1.585)); +#257022 = LINE('',#257023,#257024); +#257023 = CARTESIAN_POINT('',(198.337218,-42.679109,1.585)); +#257024 = VECTOR('',#257025,1.); +#257025 = DIRECTION('',(-1.,0.,0.)); +#257026 = ORIENTED_EDGE('',*,*,#257027,.T.); +#257027 = EDGE_CURVE('',#257020,#257028,#257030,.T.); +#257028 = VERTEX_POINT('',#257029); +#257029 = CARTESIAN_POINT('',(198.091055,-43.052919,1.585)); +#257030 = LINE('',#257031,#257032); +#257031 = CARTESIAN_POINT('',(198.091055,-42.679109,1.585)); +#257032 = VECTOR('',#257033,1.); +#257033 = DIRECTION('',(0.,-1.,0.)); +#257034 = ORIENTED_EDGE('',*,*,#257035,.T.); +#257035 = EDGE_CURVE('',#257028,#257036,#257038,.T.); +#257036 = VERTEX_POINT('',#257037); +#257037 = CARTESIAN_POINT('',(198.379302,-43.052919,1.585)); +#257038 = LINE('',#257039,#257040); +#257039 = CARTESIAN_POINT('',(198.091055,-43.052919,1.585)); +#257040 = VECTOR('',#257041,1.); +#257041 = DIRECTION('',(1.,0.,0.)); +#257042 = ORIENTED_EDGE('',*,*,#257043,.T.); +#257043 = EDGE_CURVE('',#257036,#257044,#257046,.T.); +#257044 = VERTEX_POINT('',#257045); +#257045 = CARTESIAN_POINT('',(198.512483,-42.919737,1.585)); +#257046 = CIRCLE('',#257047,0.186867760544); +#257047 = AXIS2_PLACEMENT_3D('',#257048,#257049,#257050); +#257048 = CARTESIAN_POINT('',(198.33176296928,-42.87219932622,1.585)); +#257049 = DIRECTION('',(0.,0.,1.)); +#257050 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#257051 = ORIENTED_EDGE('',*,*,#257052,.T.); +#257052 = EDGE_CURVE('',#257044,#257053,#257055,.T.); +#257053 = VERTEX_POINT('',#257054); +#257054 = CARTESIAN_POINT('',(198.512483,-42.81229,1.585)); +#257055 = LINE('',#257056,#257057); +#257056 = CARTESIAN_POINT('',(198.512483,-42.919737,1.585)); +#257057 = VECTOR('',#257058,1.); +#257058 = DIRECTION('',(0.,1.,0.)); +#257059 = ORIENTED_EDGE('',*,*,#257060,.T.); +#257060 = EDGE_CURVE('',#257053,#257061,#257063,.T.); +#257061 = VERTEX_POINT('',#257062); +#257062 = CARTESIAN_POINT('',(198.478225,-42.743774,1.585)); +#257063 = LINE('',#257064,#257065); +#257064 = CARTESIAN_POINT('',(198.512483,-42.81229,1.585)); +#257065 = VECTOR('',#257066,1.); +#257066 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#257067 = ORIENTED_EDGE('',*,*,#257068,.T.); +#257068 = EDGE_CURVE('',#257061,#257010,#257069,.T.); +#257069 = LINE('',#257070,#257071); +#257070 = CARTESIAN_POINT('',(198.478225,-42.743774,1.585)); +#257071 = VECTOR('',#257072,1.); +#257072 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257073 = FACE_BOUND('',#257074,.F.); +#257074 = EDGE_LOOP('',(#257075,#257086,#257094,#257102,#257110,#257119) + ); +#257075 = ORIENTED_EDGE('',*,*,#257076,.T.); +#257076 = EDGE_CURVE('',#257077,#257079,#257081,.T.); +#257077 = VERTEX_POINT('',#257078); +#257078 = CARTESIAN_POINT('',(198.464864,-42.3361,1.585)); +#257079 = VERTEX_POINT('',#257080); +#257080 = CARTESIAN_POINT('',(198.331683,-42.202919,1.585)); +#257081 = CIRCLE('',#257082,0.18686440374); +#257082 = AXIS2_PLACEMENT_3D('',#257083,#257084,#257085); +#257083 = CARTESIAN_POINT('',(198.284147,-42.383636,1.585)); +#257084 = DIRECTION('',(0.,0.,1.)); +#257085 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#257086 = ORIENTED_EDGE('',*,*,#257087,.T.); +#257087 = EDGE_CURVE('',#257079,#257088,#257090,.T.); +#257088 = VERTEX_POINT('',#257089); +#257089 = CARTESIAN_POINT('',(198.091055,-42.202919,1.585)); +#257090 = LINE('',#257091,#257092); +#257091 = CARTESIAN_POINT('',(198.331683,-42.202919,1.585)); +#257092 = VECTOR('',#257093,1.); +#257093 = DIRECTION('',(-1.,0.,0.)); +#257094 = ORIENTED_EDGE('',*,*,#257095,.T.); +#257095 = EDGE_CURVE('',#257088,#257096,#257098,.T.); +#257096 = VERTEX_POINT('',#257097); +#257097 = CARTESIAN_POINT('',(198.091055,-42.529109,1.585)); +#257098 = LINE('',#257099,#257100); +#257099 = CARTESIAN_POINT('',(198.091055,-42.202919,1.585)); +#257100 = VECTOR('',#257101,1.); +#257101 = DIRECTION('',(0.,-1.,0.)); +#257102 = ORIENTED_EDGE('',*,*,#257103,.T.); +#257103 = EDGE_CURVE('',#257096,#257104,#257106,.T.); +#257104 = VERTEX_POINT('',#257105); +#257105 = CARTESIAN_POINT('',(198.331683,-42.529109,1.585)); +#257106 = LINE('',#257107,#257108); +#257107 = CARTESIAN_POINT('',(198.091055,-42.529109,1.585)); +#257108 = VECTOR('',#257109,1.); +#257109 = DIRECTION('',(1.,0.,0.)); +#257110 = ORIENTED_EDGE('',*,*,#257111,.T.); +#257111 = EDGE_CURVE('',#257104,#257112,#257114,.T.); +#257112 = VERTEX_POINT('',#257113); +#257113 = CARTESIAN_POINT('',(198.464864,-42.395928,1.585)); +#257114 = CIRCLE('',#257115,0.18686440374); +#257115 = AXIS2_PLACEMENT_3D('',#257116,#257117,#257118); +#257116 = CARTESIAN_POINT('',(198.284147,-42.348392,1.585)); +#257117 = DIRECTION('',(0.,0.,1.)); +#257118 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#257119 = ORIENTED_EDGE('',*,*,#257120,.T.); +#257120 = EDGE_CURVE('',#257112,#257077,#257121,.T.); +#257121 = LINE('',#257122,#257123); +#257122 = CARTESIAN_POINT('',(198.464864,-42.395928,1.585)); +#257123 = VECTOR('',#257124,1.); +#257124 = DIRECTION('',(0.,1.,0.)); +#257125 = PLANE('',#257126); +#257126 = AXIS2_PLACEMENT_3D('',#257127,#257128,#257129); +#257127 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257128 = DIRECTION('',(0.,0.,1.)); +#257129 = DIRECTION('',(1.,0.,-0.)); +#257130 = SHELL_BASED_SURFACE_MODEL('',(#257131)); +#257131 = OPEN_SHELL('',(#257132)); +#257132 = ADVANCED_FACE('',(#257133,#257251,#257318),#257370,.T.); +#257133 = FACE_BOUND('',#257134,.F.); +#257134 = EDGE_LOOP('',(#257135,#257146,#257154,#257163,#257171,#257179, + #257187,#257195,#257203,#257212,#257220,#257229,#257237,#257245)); +#257135 = ORIENTED_EDGE('',*,*,#257136,.T.); +#257136 = EDGE_CURVE('',#257137,#257139,#257141,.T.); +#257137 = VERTEX_POINT('',#257138); +#257138 = CARTESIAN_POINT('',(201.942496,-42.113287,1.585)); +#257139 = VERTEX_POINT('',#257140); +#257140 = CARTESIAN_POINT('',(202.016055,-42.052919,1.585)); +#257141 = CIRCLE('',#257142,7.500074938983E-02); +#257142 = AXIS2_PLACEMENT_3D('',#257143,#257144,#257145); +#257143 = CARTESIAN_POINT('',(202.01605546611,-42.12791974938,1.585)); +#257144 = DIRECTION('',(0.,0.,-1.)); +#257145 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#257146 = ORIENTED_EDGE('',*,*,#257147,.T.); +#257147 = EDGE_CURVE('',#257139,#257148,#257150,.T.); +#257148 = VERTEX_POINT('',#257149); +#257149 = CARTESIAN_POINT('',(202.36402,-42.05436,1.585)); +#257150 = LINE('',#257151,#257152); +#257151 = CARTESIAN_POINT('',(202.016055,-42.052919,1.585)); +#257152 = VECTOR('',#257153,1.); +#257153 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#257154 = ORIENTED_EDGE('',*,*,#257155,.T.); +#257155 = EDGE_CURVE('',#257148,#257156,#257158,.T.); +#257156 = VERTEX_POINT('',#257157); +#257157 = CARTESIAN_POINT('',(202.613423,-42.303763,1.585)); +#257158 = CIRCLE('',#257159,0.347870264855); +#257159 = AXIS2_PLACEMENT_3D('',#257160,#257161,#257162); +#257160 = CARTESIAN_POINT('',(202.27669226502,-42.39109073497,1.585)); +#257161 = DIRECTION('',(0.,0.,-1.)); +#257162 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#257163 = ORIENTED_EDGE('',*,*,#257164,.T.); +#257164 = EDGE_CURVE('',#257156,#257165,#257167,.T.); +#257165 = VERTEX_POINT('',#257166); +#257166 = CARTESIAN_POINT('',(202.612201,-42.433443,1.585)); +#257167 = LINE('',#257168,#257169); +#257168 = CARTESIAN_POINT('',(202.613423,-42.303763,1.585)); +#257169 = VECTOR('',#257170,1.); +#257170 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#257171 = ORIENTED_EDGE('',*,*,#257172,.T.); +#257172 = EDGE_CURVE('',#257165,#257173,#257175,.T.); +#257173 = VERTEX_POINT('',#257174); +#257174 = CARTESIAN_POINT('',(202.549996,-42.556154,1.585)); +#257175 = LINE('',#257176,#257177); +#257176 = CARTESIAN_POINT('',(202.612201,-42.433443,1.585)); +#257177 = VECTOR('',#257178,1.); +#257178 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#257179 = ORIENTED_EDGE('',*,*,#257180,.T.); +#257180 = EDGE_CURVE('',#257173,#257181,#257183,.T.); +#257181 = VERTEX_POINT('',#257182); +#257182 = CARTESIAN_POINT('',(202.523319,-42.583862,1.585)); +#257183 = LINE('',#257184,#257185); +#257184 = CARTESIAN_POINT('',(202.549996,-42.556154,1.585)); +#257185 = VECTOR('',#257186,1.); +#257186 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#257187 = ORIENTED_EDGE('',*,*,#257188,.T.); +#257188 = EDGE_CURVE('',#257181,#257189,#257191,.T.); +#257189 = VERTEX_POINT('',#257190); +#257190 = CARTESIAN_POINT('',(202.545278,-42.598695,1.585)); +#257191 = LINE('',#257192,#257193); +#257192 = CARTESIAN_POINT('',(202.523319,-42.583862,1.585)); +#257193 = VECTOR('',#257194,1.); +#257194 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#257195 = ORIENTED_EDGE('',*,*,#257196,.T.); +#257196 = EDGE_CURVE('',#257189,#257197,#257199,.T.); +#257197 = VERTEX_POINT('',#257198); +#257198 = CARTESIAN_POINT('',(202.606946,-42.665806,1.585)); +#257199 = LINE('',#257200,#257201); +#257200 = CARTESIAN_POINT('',(202.545278,-42.598695,1.585)); +#257201 = VECTOR('',#257202,1.); +#257202 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#257203 = ORIENTED_EDGE('',*,*,#257204,.T.); +#257204 = EDGE_CURVE('',#257197,#257205,#257207,.T.); +#257205 = VERTEX_POINT('',#257206); +#257206 = CARTESIAN_POINT('',(202.597615,-43.079963,1.585)); +#257207 = CIRCLE('',#257208,0.341850333486); +#257208 = AXIS2_PLACEMENT_3D('',#257209,#257210,#257211); +#257209 = CARTESIAN_POINT('',(202.33039659864,-42.86675892761,1.585)); +#257210 = DIRECTION('',(0.,0.,-1.)); +#257211 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#257212 = ORIENTED_EDGE('',*,*,#257213,.T.); +#257213 = EDGE_CURVE('',#257205,#257214,#257216,.T.); +#257214 = VERTEX_POINT('',#257215); +#257215 = CARTESIAN_POINT('',(202.532085,-43.143417,1.585)); +#257216 = LINE('',#257217,#257218); +#257217 = CARTESIAN_POINT('',(202.597615,-43.079963,1.585)); +#257218 = VECTOR('',#257219,1.); +#257219 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#257220 = ORIENTED_EDGE('',*,*,#257221,.T.); +#257221 = EDGE_CURVE('',#257214,#257222,#257224,.T.); +#257222 = VERTEX_POINT('',#257223); +#257223 = CARTESIAN_POINT('',(201.974387,-43.190279,1.585)); +#257224 = CIRCLE('',#257225,0.612118292739); +#257225 = AXIS2_PLACEMENT_3D('',#257226,#257227,#257228); +#257226 = CARTESIAN_POINT('',(202.20765114383,-42.62434910725,1.585)); +#257227 = DIRECTION('',(-0.,0.,-1.)); +#257228 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#257229 = ORIENTED_EDGE('',*,*,#257230,.T.); +#257230 = EDGE_CURVE('',#257222,#257231,#257233,.T.); +#257231 = VERTEX_POINT('',#257232); +#257232 = CARTESIAN_POINT('',(201.953695,-43.169587,1.585)); +#257233 = LINE('',#257234,#257235); +#257234 = CARTESIAN_POINT('',(201.974387,-43.190279,1.585)); +#257235 = VECTOR('',#257236,1.); +#257236 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#257237 = ORIENTED_EDGE('',*,*,#257238,.T.); +#257238 = EDGE_CURVE('',#257231,#257239,#257241,.T.); +#257239 = VERTEX_POINT('',#257240); +#257240 = CARTESIAN_POINT('',(201.941055,-43.127919,1.585)); +#257241 = LINE('',#257242,#257243); +#257242 = CARTESIAN_POINT('',(201.953695,-43.169587,1.585)); +#257243 = VECTOR('',#257244,1.); +#257244 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#257245 = ORIENTED_EDGE('',*,*,#257246,.T.); +#257246 = EDGE_CURVE('',#257239,#257137,#257247,.T.); +#257247 = LINE('',#257248,#257249); +#257248 = CARTESIAN_POINT('',(201.941055,-43.127919,1.585)); +#257249 = VECTOR('',#257250,1.); +#257250 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#257251 = FACE_BOUND('',#257252,.F.); +#257252 = EDGE_LOOP('',(#257253,#257263,#257271,#257279,#257287,#257296, + #257304,#257312)); +#257253 = ORIENTED_EDGE('',*,*,#257254,.T.); +#257254 = EDGE_CURVE('',#257255,#257257,#257259,.T.); +#257255 = VERTEX_POINT('',#257256); +#257256 = CARTESIAN_POINT('',(202.451731,-42.71728,1.585)); +#257257 = VERTEX_POINT('',#257258); +#257258 = CARTESIAN_POINT('',(202.337218,-42.679109,1.585)); +#257259 = LINE('',#257260,#257261); +#257260 = CARTESIAN_POINT('',(202.451731,-42.71728,1.585)); +#257261 = VECTOR('',#257262,1.); +#257262 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#257263 = ORIENTED_EDGE('',*,*,#257264,.T.); +#257264 = EDGE_CURVE('',#257257,#257265,#257267,.T.); +#257265 = VERTEX_POINT('',#257266); +#257266 = CARTESIAN_POINT('',(202.091055,-42.679109,1.585)); +#257267 = LINE('',#257268,#257269); +#257268 = CARTESIAN_POINT('',(202.337218,-42.679109,1.585)); +#257269 = VECTOR('',#257270,1.); +#257270 = DIRECTION('',(-1.,0.,0.)); +#257271 = ORIENTED_EDGE('',*,*,#257272,.T.); +#257272 = EDGE_CURVE('',#257265,#257273,#257275,.T.); +#257273 = VERTEX_POINT('',#257274); +#257274 = CARTESIAN_POINT('',(202.091055,-43.052919,1.585)); +#257275 = LINE('',#257276,#257277); +#257276 = CARTESIAN_POINT('',(202.091055,-42.679109,1.585)); +#257277 = VECTOR('',#257278,1.); +#257278 = DIRECTION('',(0.,-1.,0.)); +#257279 = ORIENTED_EDGE('',*,*,#257280,.T.); +#257280 = EDGE_CURVE('',#257273,#257281,#257283,.T.); +#257281 = VERTEX_POINT('',#257282); +#257282 = CARTESIAN_POINT('',(202.379302,-43.052919,1.585)); +#257283 = LINE('',#257284,#257285); +#257284 = CARTESIAN_POINT('',(202.091055,-43.052919,1.585)); +#257285 = VECTOR('',#257286,1.); +#257286 = DIRECTION('',(1.,0.,0.)); +#257287 = ORIENTED_EDGE('',*,*,#257288,.T.); +#257288 = EDGE_CURVE('',#257281,#257289,#257291,.T.); +#257289 = VERTEX_POINT('',#257290); +#257290 = CARTESIAN_POINT('',(202.512483,-42.919737,1.585)); +#257291 = CIRCLE('',#257292,0.186867760544); +#257292 = AXIS2_PLACEMENT_3D('',#257293,#257294,#257295); +#257293 = CARTESIAN_POINT('',(202.33176296928,-42.87219932622,1.585)); +#257294 = DIRECTION('',(0.,0.,1.)); +#257295 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#257296 = ORIENTED_EDGE('',*,*,#257297,.T.); +#257297 = EDGE_CURVE('',#257289,#257298,#257300,.T.); +#257298 = VERTEX_POINT('',#257299); +#257299 = CARTESIAN_POINT('',(202.512483,-42.81229,1.585)); +#257300 = LINE('',#257301,#257302); +#257301 = CARTESIAN_POINT('',(202.512483,-42.919737,1.585)); +#257302 = VECTOR('',#257303,1.); +#257303 = DIRECTION('',(0.,1.,0.)); +#257304 = ORIENTED_EDGE('',*,*,#257305,.T.); +#257305 = EDGE_CURVE('',#257298,#257306,#257308,.T.); +#257306 = VERTEX_POINT('',#257307); +#257307 = CARTESIAN_POINT('',(202.478225,-42.743774,1.585)); +#257308 = LINE('',#257309,#257310); +#257309 = CARTESIAN_POINT('',(202.512483,-42.81229,1.585)); +#257310 = VECTOR('',#257311,1.); +#257311 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#257312 = ORIENTED_EDGE('',*,*,#257313,.T.); +#257313 = EDGE_CURVE('',#257306,#257255,#257314,.T.); +#257314 = LINE('',#257315,#257316); +#257315 = CARTESIAN_POINT('',(202.478225,-42.743774,1.585)); +#257316 = VECTOR('',#257317,1.); +#257317 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257318 = FACE_BOUND('',#257319,.F.); +#257319 = EDGE_LOOP('',(#257320,#257331,#257339,#257347,#257355,#257364) + ); +#257320 = ORIENTED_EDGE('',*,*,#257321,.T.); +#257321 = EDGE_CURVE('',#257322,#257324,#257326,.T.); +#257322 = VERTEX_POINT('',#257323); +#257323 = CARTESIAN_POINT('',(202.464864,-42.3361,1.585)); +#257324 = VERTEX_POINT('',#257325); +#257325 = CARTESIAN_POINT('',(202.331683,-42.202919,1.585)); +#257326 = CIRCLE('',#257327,0.18686440374); +#257327 = AXIS2_PLACEMENT_3D('',#257328,#257329,#257330); +#257328 = CARTESIAN_POINT('',(202.284147,-42.383636,1.585)); +#257329 = DIRECTION('',(0.,0.,1.)); +#257330 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#257331 = ORIENTED_EDGE('',*,*,#257332,.T.); +#257332 = EDGE_CURVE('',#257324,#257333,#257335,.T.); +#257333 = VERTEX_POINT('',#257334); +#257334 = CARTESIAN_POINT('',(202.091055,-42.202919,1.585)); +#257335 = LINE('',#257336,#257337); +#257336 = CARTESIAN_POINT('',(202.331683,-42.202919,1.585)); +#257337 = VECTOR('',#257338,1.); +#257338 = DIRECTION('',(-1.,0.,0.)); +#257339 = ORIENTED_EDGE('',*,*,#257340,.T.); +#257340 = EDGE_CURVE('',#257333,#257341,#257343,.T.); +#257341 = VERTEX_POINT('',#257342); +#257342 = CARTESIAN_POINT('',(202.091055,-42.529109,1.585)); +#257343 = LINE('',#257344,#257345); +#257344 = CARTESIAN_POINT('',(202.091055,-42.202919,1.585)); +#257345 = VECTOR('',#257346,1.); +#257346 = DIRECTION('',(0.,-1.,0.)); +#257347 = ORIENTED_EDGE('',*,*,#257348,.T.); +#257348 = EDGE_CURVE('',#257341,#257349,#257351,.T.); +#257349 = VERTEX_POINT('',#257350); +#257350 = CARTESIAN_POINT('',(202.331683,-42.529109,1.585)); +#257351 = LINE('',#257352,#257353); +#257352 = CARTESIAN_POINT('',(202.091055,-42.529109,1.585)); +#257353 = VECTOR('',#257354,1.); +#257354 = DIRECTION('',(1.,0.,0.)); +#257355 = ORIENTED_EDGE('',*,*,#257356,.T.); +#257356 = EDGE_CURVE('',#257349,#257357,#257359,.T.); +#257357 = VERTEX_POINT('',#257358); +#257358 = CARTESIAN_POINT('',(202.464864,-42.395928,1.585)); +#257359 = CIRCLE('',#257360,0.18686440374); +#257360 = AXIS2_PLACEMENT_3D('',#257361,#257362,#257363); +#257361 = CARTESIAN_POINT('',(202.284147,-42.348392,1.585)); +#257362 = DIRECTION('',(0.,0.,1.)); +#257363 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#257364 = ORIENTED_EDGE('',*,*,#257365,.T.); +#257365 = EDGE_CURVE('',#257357,#257322,#257366,.T.); +#257366 = LINE('',#257367,#257368); +#257367 = CARTESIAN_POINT('',(202.464864,-42.395928,1.585)); +#257368 = VECTOR('',#257369,1.); +#257369 = DIRECTION('',(0.,1.,0.)); +#257370 = PLANE('',#257371); +#257371 = AXIS2_PLACEMENT_3D('',#257372,#257373,#257374); +#257372 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257373 = DIRECTION('',(0.,0.,1.)); +#257374 = DIRECTION('',(1.,0.,-0.)); +#257375 = SHELL_BASED_SURFACE_MODEL('',(#257376)); +#257376 = OPEN_SHELL('',(#257377)); +#257377 = ADVANCED_FACE('',(#257378),#257564,.T.); +#257378 = FACE_BOUND('',#257379,.F.); +#257379 = EDGE_LOOP('',(#257380,#257391,#257399,#257408,#257416,#257424, + #257433,#257441,#257450,#257458,#257466,#257474,#257483,#257491, + #257500,#257508,#257517,#257525,#257533,#257541,#257550,#257558)); +#257380 = ORIENTED_EDGE('',*,*,#257381,.T.); +#257381 = EDGE_CURVE('',#257382,#257384,#257386,.T.); +#257382 = VERTEX_POINT('',#257383); +#257383 = CARTESIAN_POINT('',(202.906185,-42.201478,1.585)); +#257384 = VERTEX_POINT('',#257385); +#257385 = CARTESIAN_POINT('',(202.920817,-42.052919,1.585)); +#257386 = CIRCLE('',#257387,7.500006711464E-02); +#257387 = AXIS2_PLACEMENT_3D('',#257388,#257389,#257390); +#257388 = CARTESIAN_POINT('',(202.92081693288,-42.12791906711,1.585)); +#257389 = DIRECTION('',(0.,0.,-1.)); +#257390 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#257391 = ORIENTED_EDGE('',*,*,#257392,.T.); +#257392 = EDGE_CURVE('',#257384,#257393,#257395,.T.); +#257393 = VERTEX_POINT('',#257394); +#257394 = CARTESIAN_POINT('',(203.547602,-42.053681,1.585)); +#257395 = LINE('',#257396,#257397); +#257396 = CARTESIAN_POINT('',(202.920817,-42.052919,1.585)); +#257397 = VECTOR('',#257398,1.); +#257398 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#257399 = ORIENTED_EDGE('',*,*,#257400,.T.); +#257400 = EDGE_CURVE('',#257393,#257401,#257403,.T.); +#257401 = VERTEX_POINT('',#257402); +#257402 = CARTESIAN_POINT('',(203.613423,-42.142551,1.585)); +#257403 = CIRCLE('',#257404,7.447391611626E-02); +#257404 = AXIS2_PLACEMENT_3D('',#257405,#257406,#257407); +#257405 = CARTESIAN_POINT('',(203.54042292664,-42.1278080874,1.585)); +#257406 = DIRECTION('',(0.,0.,-1.)); +#257407 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#257408 = ORIENTED_EDGE('',*,*,#257409,.T.); +#257409 = EDGE_CURVE('',#257401,#257410,#257412,.T.); +#257410 = VERTEX_POINT('',#257411); +#257411 = CARTESIAN_POINT('',(203.596307,-42.177307,1.585)); +#257412 = LINE('',#257413,#257414); +#257413 = CARTESIAN_POINT('',(203.613423,-42.142551,1.585)); +#257414 = VECTOR('',#257415,1.); +#257415 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#257416 = ORIENTED_EDGE('',*,*,#257417,.T.); +#257417 = EDGE_CURVE('',#257410,#257418,#257420,.T.); +#257418 = VERTEX_POINT('',#257419); +#257419 = CARTESIAN_POINT('',(203.369411,-42.436616,1.585)); +#257420 = LINE('',#257421,#257422); +#257421 = CARTESIAN_POINT('',(203.596307,-42.177307,1.585)); +#257422 = VECTOR('',#257423,1.); +#257423 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#257424 = ORIENTED_EDGE('',*,*,#257425,.T.); +#257425 = EDGE_CURVE('',#257418,#257426,#257428,.T.); +#257426 = VERTEX_POINT('',#257427); +#257427 = CARTESIAN_POINT('',(203.613423,-42.684715,1.585)); +#257428 = CIRCLE('',#257429,0.348520834816); +#257429 = AXIS2_PLACEMENT_3D('',#257430,#257431,#257432); +#257430 = CARTESIAN_POINT('',(203.2761176174,-42.77241819931,1.585)); +#257431 = DIRECTION('',(0.,0.,-1.)); +#257432 = DIRECTION('',(0.267683803322,0.963506814423,0.)); +#257433 = ORIENTED_EDGE('',*,*,#257434,.T.); +#257434 = EDGE_CURVE('',#257426,#257435,#257437,.T.); +#257435 = VERTEX_POINT('',#257436); +#257436 = CARTESIAN_POINT('',(203.612201,-42.957252,1.585)); +#257437 = LINE('',#257438,#257439); +#257438 = CARTESIAN_POINT('',(203.613423,-42.684715,1.585)); +#257439 = VECTOR('',#257440,1.); +#257440 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#257441 = ORIENTED_EDGE('',*,*,#257442,.T.); +#257442 = EDGE_CURVE('',#257435,#257443,#257445,.T.); +#257443 = VERTEX_POINT('',#257444); +#257444 = CARTESIAN_POINT('',(203.36402,-43.201478,1.585)); +#257445 = CIRCLE('',#257446,0.348635327447); +#257446 = AXIS2_PLACEMENT_3D('',#257447,#257448,#257449); +#257447 = CARTESIAN_POINT('',(203.27624848129,-42.86407208415,1.585)); +#257448 = DIRECTION('',(0.,0.,-1.)); +#257449 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#257450 = ORIENTED_EDGE('',*,*,#257451,.T.); +#257451 = EDGE_CURVE('',#257443,#257452,#257454,.T.); +#257452 = VERTEX_POINT('',#257453); +#257453 = CARTESIAN_POINT('',(203.043864,-43.200256,1.585)); +#257454 = LINE('',#257455,#257456); +#257455 = CARTESIAN_POINT('',(203.36402,-43.201478,1.585)); +#257456 = VECTOR('',#257457,1.); +#257457 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#257458 = ORIENTED_EDGE('',*,*,#257459,.T.); +#257459 = EDGE_CURVE('',#257452,#257460,#257462,.T.); +#257460 = VERTEX_POINT('',#257461); +#257461 = CARTESIAN_POINT('',(202.921151,-43.13805,1.585)); +#257462 = LINE('',#257463,#257464); +#257463 = CARTESIAN_POINT('',(203.043864,-43.200256,1.585)); +#257464 = VECTOR('',#257465,1.); +#257465 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#257466 = ORIENTED_EDGE('',*,*,#257467,.T.); +#257467 = EDGE_CURVE('',#257460,#257468,#257470,.T.); +#257468 = VERTEX_POINT('',#257469); +#257469 = CARTESIAN_POINT('',(202.858456,-43.074347,1.585)); +#257470 = LINE('',#257471,#257472); +#257471 = CARTESIAN_POINT('',(202.921151,-43.13805,1.585)); +#257472 = VECTOR('',#257473,1.); +#257473 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#257474 = ORIENTED_EDGE('',*,*,#257475,.T.); +#257475 = EDGE_CURVE('',#257468,#257476,#257478,.T.); +#257476 = VERTEX_POINT('',#257477); +#257477 = CARTESIAN_POINT('',(202.973851,-42.979648,1.585)); +#257478 = CIRCLE('',#257479,7.500012668041E-02); +#257479 = AXIS2_PLACEMENT_3D('',#257480,#257481,#257482); +#257480 = CARTESIAN_POINT('',(202.92081705199,-43.03268024831,1.585)); +#257481 = DIRECTION('',(0.,0.,-1.)); +#257482 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#257483 = ORIENTED_EDGE('',*,*,#257484,.T.); +#257484 = EDGE_CURVE('',#257476,#257485,#257487,.T.); +#257485 = VERTEX_POINT('',#257486); +#257486 = CARTESIAN_POINT('',(203.012863,-43.018661,1.585)); +#257487 = LINE('',#257488,#257489); +#257488 = CARTESIAN_POINT('',(202.973851,-42.979648,1.585)); +#257489 = VECTOR('',#257490,1.); +#257490 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#257491 = ORIENTED_EDGE('',*,*,#257492,.T.); +#257492 = EDGE_CURVE('',#257485,#257493,#257495,.T.); +#257493 = VERTEX_POINT('',#257494); +#257494 = CARTESIAN_POINT('',(203.400198,-43.018661,1.585)); +#257495 = CIRCLE('',#257496,0.358502380266); +#257496 = AXIS2_PLACEMENT_3D('',#257497,#257498,#257499); +#257497 = CARTESIAN_POINT('',(203.2065305,-42.716971,1.585)); +#257498 = DIRECTION('',(0.,0.,1.)); +#257499 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#257500 = ORIENTED_EDGE('',*,*,#257501,.T.); +#257501 = EDGE_CURVE('',#257493,#257502,#257504,.T.); +#257502 = VERTEX_POINT('',#257503); +#257503 = CARTESIAN_POINT('',(203.430605,-42.988253,1.585)); +#257504 = LINE('',#257505,#257506); +#257505 = CARTESIAN_POINT('',(203.400198,-43.018661,1.585)); +#257506 = VECTOR('',#257507,1.); +#257507 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#257508 = ORIENTED_EDGE('',*,*,#257509,.T.); +#257509 = EDGE_CURVE('',#257502,#257510,#257512,.T.); +#257510 = VERTEX_POINT('',#257511); +#257511 = CARTESIAN_POINT('',(203.430606,-42.648536,1.585)); +#257512 = CIRCLE('',#257513,0.305616146029); +#257513 = AXIS2_PLACEMENT_3D('',#257514,#257515,#257516); +#257514 = CARTESIAN_POINT('',(203.17653992049,-42.81839375212,1.585)); +#257515 = DIRECTION('',(0.,-0.,1.)); +#257516 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#257517 = ORIENTED_EDGE('',*,*,#257518,.T.); +#257518 = EDGE_CURVE('',#257510,#257519,#257521,.T.); +#257519 = VERTEX_POINT('',#257520); +#257520 = CARTESIAN_POINT('',(203.400199,-42.618129,1.585)); +#257521 = LINE('',#257522,#257523); +#257522 = CARTESIAN_POINT('',(203.430606,-42.648536,1.585)); +#257523 = VECTOR('',#257524,1.); +#257524 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257525 = ORIENTED_EDGE('',*,*,#257526,.T.); +#257526 = EDGE_CURVE('',#257519,#257527,#257529,.T.); +#257527 = VERTEX_POINT('',#257528); +#257528 = CARTESIAN_POINT('',(203.331683,-42.583871,1.585)); +#257529 = LINE('',#257530,#257531); +#257530 = CARTESIAN_POINT('',(203.400199,-42.618129,1.585)); +#257531 = VECTOR('',#257532,1.); +#257532 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#257533 = ORIENTED_EDGE('',*,*,#257534,.T.); +#257534 = EDGE_CURVE('',#257527,#257535,#257537,.T.); +#257535 = VERTEX_POINT('',#257536); +#257536 = CARTESIAN_POINT('',(203.191899,-42.58243,1.585)); +#257537 = LINE('',#257538,#257539); +#257538 = CARTESIAN_POINT('',(203.331683,-42.583871,1.585)); +#257539 = VECTOR('',#257540,1.); +#257540 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#257541 = ORIENTED_EDGE('',*,*,#257542,.T.); +#257542 = EDGE_CURVE('',#257535,#257543,#257545,.T.); +#257543 = VERTEX_POINT('',#257544); +#257544 = CARTESIAN_POINT('',(203.150088,-42.459483,1.585)); +#257545 = CIRCLE('',#257546,7.500015628756E-02); +#257546 = AXIS2_PLACEMENT_3D('',#257547,#257548,#257549); +#257547 = CARTESIAN_POINT('',(203.20653128432,-42.5088710461,1.585)); +#257548 = DIRECTION('',(0.,0.,-1.)); +#257549 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#257550 = ORIENTED_EDGE('',*,*,#257551,.T.); +#257551 = EDGE_CURVE('',#257543,#257552,#257554,.T.); +#257552 = VERTEX_POINT('',#257553); +#257553 = CARTESIAN_POINT('',(203.374582,-42.202919,1.585)); +#257554 = LINE('',#257555,#257556); +#257555 = CARTESIAN_POINT('',(203.150088,-42.459483,1.585)); +#257556 = VECTOR('',#257557,1.); +#257557 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#257558 = ORIENTED_EDGE('',*,*,#257559,.T.); +#257559 = EDGE_CURVE('',#257552,#257382,#257560,.T.); +#257560 = LINE('',#257561,#257562); +#257561 = CARTESIAN_POINT('',(203.374582,-42.202919,1.585)); +#257562 = VECTOR('',#257563,1.); +#257563 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#257564 = PLANE('',#257565); +#257565 = AXIS2_PLACEMENT_3D('',#257566,#257567,#257568); +#257566 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257567 = DIRECTION('',(0.,0.,1.)); +#257568 = DIRECTION('',(1.,0.,-0.)); +#257569 = SHELL_BASED_SURFACE_MODEL('',(#257570)); +#257570 = OPEN_SHELL('',(#257571)); +#257571 = ADVANCED_FACE('',(#257572,#257690,#257757),#257809,.T.); +#257572 = FACE_BOUND('',#257573,.F.); +#257573 = EDGE_LOOP('',(#257574,#257585,#257593,#257602,#257610,#257618, + #257626,#257634,#257642,#257651,#257659,#257668,#257676,#257684)); +#257574 = ORIENTED_EDGE('',*,*,#257575,.T.); +#257575 = EDGE_CURVE('',#257576,#257578,#257580,.T.); +#257576 = VERTEX_POINT('',#257577); +#257577 = CARTESIAN_POINT('',(205.942496,-42.113287,1.585)); +#257578 = VERTEX_POINT('',#257579); +#257579 = CARTESIAN_POINT('',(206.016055,-42.052919,1.585)); +#257580 = CIRCLE('',#257581,7.500074938983E-02); +#257581 = AXIS2_PLACEMENT_3D('',#257582,#257583,#257584); +#257582 = CARTESIAN_POINT('',(206.01605546611,-42.12791974938,1.585)); +#257583 = DIRECTION('',(0.,0.,-1.)); +#257584 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#257585 = ORIENTED_EDGE('',*,*,#257586,.T.); +#257586 = EDGE_CURVE('',#257578,#257587,#257589,.T.); +#257587 = VERTEX_POINT('',#257588); +#257588 = CARTESIAN_POINT('',(206.36402,-42.05436,1.585)); +#257589 = LINE('',#257590,#257591); +#257590 = CARTESIAN_POINT('',(206.016055,-42.052919,1.585)); +#257591 = VECTOR('',#257592,1.); +#257592 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#257593 = ORIENTED_EDGE('',*,*,#257594,.T.); +#257594 = EDGE_CURVE('',#257587,#257595,#257597,.T.); +#257595 = VERTEX_POINT('',#257596); +#257596 = CARTESIAN_POINT('',(206.613423,-42.303763,1.585)); +#257597 = CIRCLE('',#257598,0.347870264855); +#257598 = AXIS2_PLACEMENT_3D('',#257599,#257600,#257601); +#257599 = CARTESIAN_POINT('',(206.27669226502,-42.39109073497,1.585)); +#257600 = DIRECTION('',(0.,0.,-1.)); +#257601 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#257602 = ORIENTED_EDGE('',*,*,#257603,.T.); +#257603 = EDGE_CURVE('',#257595,#257604,#257606,.T.); +#257604 = VERTEX_POINT('',#257605); +#257605 = CARTESIAN_POINT('',(206.612201,-42.433443,1.585)); +#257606 = LINE('',#257607,#257608); +#257607 = CARTESIAN_POINT('',(206.613423,-42.303763,1.585)); +#257608 = VECTOR('',#257609,1.); +#257609 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#257610 = ORIENTED_EDGE('',*,*,#257611,.T.); +#257611 = EDGE_CURVE('',#257604,#257612,#257614,.T.); +#257612 = VERTEX_POINT('',#257613); +#257613 = CARTESIAN_POINT('',(206.549996,-42.556154,1.585)); +#257614 = LINE('',#257615,#257616); +#257615 = CARTESIAN_POINT('',(206.612201,-42.433443,1.585)); +#257616 = VECTOR('',#257617,1.); +#257617 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#257618 = ORIENTED_EDGE('',*,*,#257619,.T.); +#257619 = EDGE_CURVE('',#257612,#257620,#257622,.T.); +#257620 = VERTEX_POINT('',#257621); +#257621 = CARTESIAN_POINT('',(206.523319,-42.583862,1.585)); +#257622 = LINE('',#257623,#257624); +#257623 = CARTESIAN_POINT('',(206.549996,-42.556154,1.585)); +#257624 = VECTOR('',#257625,1.); +#257625 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#257626 = ORIENTED_EDGE('',*,*,#257627,.T.); +#257627 = EDGE_CURVE('',#257620,#257628,#257630,.T.); +#257628 = VERTEX_POINT('',#257629); +#257629 = CARTESIAN_POINT('',(206.545278,-42.598695,1.585)); +#257630 = LINE('',#257631,#257632); +#257631 = CARTESIAN_POINT('',(206.523319,-42.583862,1.585)); +#257632 = VECTOR('',#257633,1.); +#257633 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#257634 = ORIENTED_EDGE('',*,*,#257635,.T.); +#257635 = EDGE_CURVE('',#257628,#257636,#257638,.T.); +#257636 = VERTEX_POINT('',#257637); +#257637 = CARTESIAN_POINT('',(206.606946,-42.665806,1.585)); +#257638 = LINE('',#257639,#257640); +#257639 = CARTESIAN_POINT('',(206.545278,-42.598695,1.585)); +#257640 = VECTOR('',#257641,1.); +#257641 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#257642 = ORIENTED_EDGE('',*,*,#257643,.T.); +#257643 = EDGE_CURVE('',#257636,#257644,#257646,.T.); +#257644 = VERTEX_POINT('',#257645); +#257645 = CARTESIAN_POINT('',(206.597615,-43.079963,1.585)); +#257646 = CIRCLE('',#257647,0.341850333486); +#257647 = AXIS2_PLACEMENT_3D('',#257648,#257649,#257650); +#257648 = CARTESIAN_POINT('',(206.33039659864,-42.86675892761,1.585)); +#257649 = DIRECTION('',(0.,0.,-1.)); +#257650 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#257651 = ORIENTED_EDGE('',*,*,#257652,.T.); +#257652 = EDGE_CURVE('',#257644,#257653,#257655,.T.); +#257653 = VERTEX_POINT('',#257654); +#257654 = CARTESIAN_POINT('',(206.532085,-43.143417,1.585)); +#257655 = LINE('',#257656,#257657); +#257656 = CARTESIAN_POINT('',(206.597615,-43.079963,1.585)); +#257657 = VECTOR('',#257658,1.); +#257658 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#257659 = ORIENTED_EDGE('',*,*,#257660,.T.); +#257660 = EDGE_CURVE('',#257653,#257661,#257663,.T.); +#257661 = VERTEX_POINT('',#257662); +#257662 = CARTESIAN_POINT('',(205.974387,-43.190279,1.585)); +#257663 = CIRCLE('',#257664,0.612118292739); +#257664 = AXIS2_PLACEMENT_3D('',#257665,#257666,#257667); +#257665 = CARTESIAN_POINT('',(206.20765114383,-42.62434910725,1.585)); +#257666 = DIRECTION('',(-0.,0.,-1.)); +#257667 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#257668 = ORIENTED_EDGE('',*,*,#257669,.T.); +#257669 = EDGE_CURVE('',#257661,#257670,#257672,.T.); +#257670 = VERTEX_POINT('',#257671); +#257671 = CARTESIAN_POINT('',(205.953695,-43.169587,1.585)); +#257672 = LINE('',#257673,#257674); +#257673 = CARTESIAN_POINT('',(205.974387,-43.190279,1.585)); +#257674 = VECTOR('',#257675,1.); +#257675 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#257676 = ORIENTED_EDGE('',*,*,#257677,.T.); +#257677 = EDGE_CURVE('',#257670,#257678,#257680,.T.); +#257678 = VERTEX_POINT('',#257679); +#257679 = CARTESIAN_POINT('',(205.941055,-43.127919,1.585)); +#257680 = LINE('',#257681,#257682); +#257681 = CARTESIAN_POINT('',(205.953695,-43.169587,1.585)); +#257682 = VECTOR('',#257683,1.); +#257683 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#257684 = ORIENTED_EDGE('',*,*,#257685,.T.); +#257685 = EDGE_CURVE('',#257678,#257576,#257686,.T.); +#257686 = LINE('',#257687,#257688); +#257687 = CARTESIAN_POINT('',(205.941055,-43.127919,1.585)); +#257688 = VECTOR('',#257689,1.); +#257689 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#257690 = FACE_BOUND('',#257691,.F.); +#257691 = EDGE_LOOP('',(#257692,#257702,#257710,#257718,#257726,#257735, + #257743,#257751)); +#257692 = ORIENTED_EDGE('',*,*,#257693,.T.); +#257693 = EDGE_CURVE('',#257694,#257696,#257698,.T.); +#257694 = VERTEX_POINT('',#257695); +#257695 = CARTESIAN_POINT('',(206.451731,-42.71728,1.585)); +#257696 = VERTEX_POINT('',#257697); +#257697 = CARTESIAN_POINT('',(206.337218,-42.679109,1.585)); +#257698 = LINE('',#257699,#257700); +#257699 = CARTESIAN_POINT('',(206.451731,-42.71728,1.585)); +#257700 = VECTOR('',#257701,1.); +#257701 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#257702 = ORIENTED_EDGE('',*,*,#257703,.T.); +#257703 = EDGE_CURVE('',#257696,#257704,#257706,.T.); +#257704 = VERTEX_POINT('',#257705); +#257705 = CARTESIAN_POINT('',(206.091055,-42.679109,1.585)); +#257706 = LINE('',#257707,#257708); +#257707 = CARTESIAN_POINT('',(206.337218,-42.679109,1.585)); +#257708 = VECTOR('',#257709,1.); +#257709 = DIRECTION('',(-1.,0.,0.)); +#257710 = ORIENTED_EDGE('',*,*,#257711,.T.); +#257711 = EDGE_CURVE('',#257704,#257712,#257714,.T.); +#257712 = VERTEX_POINT('',#257713); +#257713 = CARTESIAN_POINT('',(206.091055,-43.052919,1.585)); +#257714 = LINE('',#257715,#257716); +#257715 = CARTESIAN_POINT('',(206.091055,-42.679109,1.585)); +#257716 = VECTOR('',#257717,1.); +#257717 = DIRECTION('',(0.,-1.,0.)); +#257718 = ORIENTED_EDGE('',*,*,#257719,.T.); +#257719 = EDGE_CURVE('',#257712,#257720,#257722,.T.); +#257720 = VERTEX_POINT('',#257721); +#257721 = CARTESIAN_POINT('',(206.379302,-43.052919,1.585)); +#257722 = LINE('',#257723,#257724); +#257723 = CARTESIAN_POINT('',(206.091055,-43.052919,1.585)); +#257724 = VECTOR('',#257725,1.); +#257725 = DIRECTION('',(1.,0.,0.)); +#257726 = ORIENTED_EDGE('',*,*,#257727,.T.); +#257727 = EDGE_CURVE('',#257720,#257728,#257730,.T.); +#257728 = VERTEX_POINT('',#257729); +#257729 = CARTESIAN_POINT('',(206.512483,-42.919737,1.585)); +#257730 = CIRCLE('',#257731,0.186867760544); +#257731 = AXIS2_PLACEMENT_3D('',#257732,#257733,#257734); +#257732 = CARTESIAN_POINT('',(206.33176296928,-42.87219932622,1.585)); +#257733 = DIRECTION('',(0.,0.,1.)); +#257734 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#257735 = ORIENTED_EDGE('',*,*,#257736,.T.); +#257736 = EDGE_CURVE('',#257728,#257737,#257739,.T.); +#257737 = VERTEX_POINT('',#257738); +#257738 = CARTESIAN_POINT('',(206.512483,-42.81229,1.585)); +#257739 = LINE('',#257740,#257741); +#257740 = CARTESIAN_POINT('',(206.512483,-42.919737,1.585)); +#257741 = VECTOR('',#257742,1.); +#257742 = DIRECTION('',(0.,1.,0.)); +#257743 = ORIENTED_EDGE('',*,*,#257744,.T.); +#257744 = EDGE_CURVE('',#257737,#257745,#257747,.T.); +#257745 = VERTEX_POINT('',#257746); +#257746 = CARTESIAN_POINT('',(206.478225,-42.743774,1.585)); +#257747 = LINE('',#257748,#257749); +#257748 = CARTESIAN_POINT('',(206.512483,-42.81229,1.585)); +#257749 = VECTOR('',#257750,1.); +#257750 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#257751 = ORIENTED_EDGE('',*,*,#257752,.T.); +#257752 = EDGE_CURVE('',#257745,#257694,#257753,.T.); +#257753 = LINE('',#257754,#257755); +#257754 = CARTESIAN_POINT('',(206.478225,-42.743774,1.585)); +#257755 = VECTOR('',#257756,1.); +#257756 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257757 = FACE_BOUND('',#257758,.F.); +#257758 = EDGE_LOOP('',(#257759,#257770,#257778,#257786,#257794,#257803) + ); +#257759 = ORIENTED_EDGE('',*,*,#257760,.T.); +#257760 = EDGE_CURVE('',#257761,#257763,#257765,.T.); +#257761 = VERTEX_POINT('',#257762); +#257762 = CARTESIAN_POINT('',(206.464864,-42.3361,1.585)); +#257763 = VERTEX_POINT('',#257764); +#257764 = CARTESIAN_POINT('',(206.331683,-42.202919,1.585)); +#257765 = CIRCLE('',#257766,0.18686440374); +#257766 = AXIS2_PLACEMENT_3D('',#257767,#257768,#257769); +#257767 = CARTESIAN_POINT('',(206.284147,-42.383636,1.585)); +#257768 = DIRECTION('',(0.,0.,1.)); +#257769 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#257770 = ORIENTED_EDGE('',*,*,#257771,.T.); +#257771 = EDGE_CURVE('',#257763,#257772,#257774,.T.); +#257772 = VERTEX_POINT('',#257773); +#257773 = CARTESIAN_POINT('',(206.091055,-42.202919,1.585)); +#257774 = LINE('',#257775,#257776); +#257775 = CARTESIAN_POINT('',(206.331683,-42.202919,1.585)); +#257776 = VECTOR('',#257777,1.); +#257777 = DIRECTION('',(-1.,0.,0.)); +#257778 = ORIENTED_EDGE('',*,*,#257779,.T.); +#257779 = EDGE_CURVE('',#257772,#257780,#257782,.T.); +#257780 = VERTEX_POINT('',#257781); +#257781 = CARTESIAN_POINT('',(206.091055,-42.529109,1.585)); +#257782 = LINE('',#257783,#257784); +#257783 = CARTESIAN_POINT('',(206.091055,-42.202919,1.585)); +#257784 = VECTOR('',#257785,1.); +#257785 = DIRECTION('',(0.,-1.,0.)); +#257786 = ORIENTED_EDGE('',*,*,#257787,.T.); +#257787 = EDGE_CURVE('',#257780,#257788,#257790,.T.); +#257788 = VERTEX_POINT('',#257789); +#257789 = CARTESIAN_POINT('',(206.331683,-42.529109,1.585)); +#257790 = LINE('',#257791,#257792); +#257791 = CARTESIAN_POINT('',(206.091055,-42.529109,1.585)); +#257792 = VECTOR('',#257793,1.); +#257793 = DIRECTION('',(1.,0.,0.)); +#257794 = ORIENTED_EDGE('',*,*,#257795,.T.); +#257795 = EDGE_CURVE('',#257788,#257796,#257798,.T.); +#257796 = VERTEX_POINT('',#257797); +#257797 = CARTESIAN_POINT('',(206.464864,-42.395928,1.585)); +#257798 = CIRCLE('',#257799,0.18686440374); +#257799 = AXIS2_PLACEMENT_3D('',#257800,#257801,#257802); +#257800 = CARTESIAN_POINT('',(206.284147,-42.348392,1.585)); +#257801 = DIRECTION('',(0.,0.,1.)); +#257802 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#257803 = ORIENTED_EDGE('',*,*,#257804,.T.); +#257804 = EDGE_CURVE('',#257796,#257761,#257805,.T.); +#257805 = LINE('',#257806,#257807); +#257806 = CARTESIAN_POINT('',(206.464864,-42.395928,1.585)); +#257807 = VECTOR('',#257808,1.); +#257808 = DIRECTION('',(0.,1.,0.)); +#257809 = PLANE('',#257810); +#257810 = AXIS2_PLACEMENT_3D('',#257811,#257812,#257813); +#257811 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257812 = DIRECTION('',(0.,0.,1.)); +#257813 = DIRECTION('',(1.,0.,-0.)); +#257814 = SHELL_BASED_SURFACE_MODEL('',(#257815)); +#257815 = OPEN_SHELL('',(#257816)); +#257816 = ADVANCED_FACE('',(#257817),#257952,.T.); +#257817 = FACE_BOUND('',#257818,.F.); +#257818 = EDGE_LOOP('',(#257819,#257830,#257838,#257846,#257854,#257863, + #257871,#257879,#257888,#257896,#257904,#257913,#257921,#257929, + #257938,#257946)); +#257819 = ORIENTED_EDGE('',*,*,#257820,.T.); +#257820 = EDGE_CURVE('',#257821,#257823,#257825,.T.); +#257821 = VERTEX_POINT('',#257822); +#257822 = CARTESIAN_POINT('',(207.160548,-42.021051,1.585)); +#257823 = VERTEX_POINT('',#257824); +#257824 = CARTESIAN_POINT('',(207.277682,-42.104018,1.585)); +#257825 = CIRCLE('',#257826,7.499955990671E-02); +#257826 = AXIS2_PLACEMENT_3D('',#257827,#257828,#257829); +#257827 = CARTESIAN_POINT('',(207.20653150095,-42.08030006435,1.585)); +#257828 = DIRECTION('',(0.,0.,-1.)); +#257829 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#257830 = ORIENTED_EDGE('',*,*,#257831,.T.); +#257831 = EDGE_CURVE('',#257823,#257832,#257834,.T.); +#257832 = VERTEX_POINT('',#257833); +#257833 = CARTESIAN_POINT('',(207.072493,-42.719585,1.585)); +#257834 = LINE('',#257835,#257836); +#257835 = CARTESIAN_POINT('',(207.277682,-42.104018,1.585)); +#257836 = VECTOR('',#257837,1.); +#257837 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#257838 = ORIENTED_EDGE('',*,*,#257839,.T.); +#257839 = EDGE_CURVE('',#257832,#257840,#257842,.T.); +#257840 = VERTEX_POINT('',#257841); +#257841 = CARTESIAN_POINT('',(207.369626,-42.719585,1.585)); +#257842 = LINE('',#257843,#257844); +#257843 = CARTESIAN_POINT('',(207.072493,-42.719585,1.585)); +#257844 = VECTOR('',#257845,1.); +#257845 = DIRECTION('',(1.,0.,0.)); +#257846 = ORIENTED_EDGE('',*,*,#257847,.T.); +#257847 = EDGE_CURVE('',#257840,#257848,#257850,.T.); +#257848 = VERTEX_POINT('',#257849); +#257849 = CARTESIAN_POINT('',(207.371067,-42.44662,1.585)); +#257850 = LINE('',#257851,#257852); +#257851 = CARTESIAN_POINT('',(207.369626,-42.719585,1.585)); +#257852 = VECTOR('',#257853,1.); +#257853 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#257854 = ORIENTED_EDGE('',*,*,#257855,.T.); +#257855 = EDGE_CURVE('',#257848,#257856,#257858,.T.); +#257856 = VERTEX_POINT('',#257857); +#257857 = CARTESIAN_POINT('',(207.519626,-42.461252,1.585)); +#257858 = CIRCLE('',#257859,7.500006711463E-02); +#257859 = AXIS2_PLACEMENT_3D('',#257860,#257861,#257862); +#257860 = CARTESIAN_POINT('',(207.44462593288,-42.46125193288,1.585)); +#257861 = DIRECTION('',(0.,0.,-1.)); +#257862 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#257863 = ORIENTED_EDGE('',*,*,#257864,.T.); +#257864 = EDGE_CURVE('',#257856,#257865,#257867,.T.); +#257865 = VERTEX_POINT('',#257866); +#257866 = CARTESIAN_POINT('',(207.519626,-42.719585,1.585)); +#257867 = LINE('',#257868,#257869); +#257868 = CARTESIAN_POINT('',(207.519626,-42.461252,1.585)); +#257869 = VECTOR('',#257870,1.); +#257870 = DIRECTION('',(0.,-1.,0.)); +#257871 = ORIENTED_EDGE('',*,*,#257872,.T.); +#257872 = EDGE_CURVE('',#257865,#257873,#257875,.T.); +#257873 = VERTEX_POINT('',#257874); +#257874 = CARTESIAN_POINT('',(207.602115,-42.721026,1.585)); +#257875 = LINE('',#257876,#257877); +#257876 = CARTESIAN_POINT('',(207.519626,-42.719585,1.585)); +#257877 = VECTOR('',#257878,1.); +#257878 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#257879 = ORIENTED_EDGE('',*,*,#257880,.T.); +#257880 = EDGE_CURVE('',#257873,#257881,#257883,.T.); +#257881 = VERTEX_POINT('',#257882); +#257882 = CARTESIAN_POINT('',(207.587483,-42.869585,1.585)); +#257883 = CIRCLE('',#257884,7.500006711465E-02); +#257884 = AXIS2_PLACEMENT_3D('',#257885,#257886,#257887); +#257885 = CARTESIAN_POINT('',(207.58748306711,-42.79458493288,1.585)); +#257886 = DIRECTION('',(0.,0.,-1.)); +#257887 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#257888 = ORIENTED_EDGE('',*,*,#257889,.T.); +#257889 = EDGE_CURVE('',#257881,#257890,#257892,.T.); +#257890 = VERTEX_POINT('',#257891); +#257891 = CARTESIAN_POINT('',(207.519626,-42.869585,1.585)); +#257892 = LINE('',#257893,#257894); +#257893 = CARTESIAN_POINT('',(207.587483,-42.869585,1.585)); +#257894 = VECTOR('',#257895,1.); +#257895 = DIRECTION('',(-1.,0.,0.)); +#257896 = ORIENTED_EDGE('',*,*,#257897,.T.); +#257897 = EDGE_CURVE('',#257890,#257898,#257900,.T.); +#257898 = VERTEX_POINT('',#257899); +#257899 = CARTESIAN_POINT('',(207.518185,-43.142551,1.585)); +#257900 = LINE('',#257901,#257902); +#257901 = CARTESIAN_POINT('',(207.519626,-42.869585,1.585)); +#257902 = VECTOR('',#257903,1.); +#257903 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#257904 = ORIENTED_EDGE('',*,*,#257905,.T.); +#257905 = EDGE_CURVE('',#257898,#257906,#257908,.T.); +#257906 = VERTEX_POINT('',#257907); +#257907 = CARTESIAN_POINT('',(207.369626,-43.127919,1.585)); +#257908 = CIRCLE('',#257909,7.500006711463E-02); +#257909 = AXIS2_PLACEMENT_3D('',#257910,#257911,#257912); +#257910 = CARTESIAN_POINT('',(207.44462606711,-43.12791906711,1.585)); +#257911 = DIRECTION('',(-0.,0.,-1.)); +#257912 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#257913 = ORIENTED_EDGE('',*,*,#257914,.T.); +#257914 = EDGE_CURVE('',#257906,#257915,#257917,.T.); +#257915 = VERTEX_POINT('',#257916); +#257916 = CARTESIAN_POINT('',(207.369626,-42.869585,1.585)); +#257917 = LINE('',#257918,#257919); +#257918 = CARTESIAN_POINT('',(207.369626,-43.127919,1.585)); +#257919 = VECTOR('',#257920,1.); +#257920 = DIRECTION('',(0.,1.,0.)); +#257921 = ORIENTED_EDGE('',*,*,#257922,.T.); +#257922 = EDGE_CURVE('',#257915,#257923,#257925,.T.); +#257923 = VERTEX_POINT('',#257924); +#257924 = CARTESIAN_POINT('',(206.953804,-42.868144,1.585)); +#257925 = LINE('',#257926,#257927); +#257926 = CARTESIAN_POINT('',(207.369626,-42.869585,1.585)); +#257927 = VECTOR('',#257928,1.); +#257928 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#257929 = ORIENTED_EDGE('',*,*,#257930,.T.); +#257930 = EDGE_CURVE('',#257923,#257931,#257933,.T.); +#257931 = VERTEX_POINT('',#257932); +#257932 = CARTESIAN_POINT('',(206.897285,-42.770868,1.585)); +#257933 = CIRCLE('',#257934,7.499997045037E-02); +#257934 = AXIS2_PLACEMENT_3D('',#257935,#257936,#257937); +#257935 = CARTESIAN_POINT('',(206.96843617257,-42.79458521335,1.585)); +#257936 = DIRECTION('',(0.,0.,-1.)); +#257937 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#257938 = ORIENTED_EDGE('',*,*,#257939,.T.); +#257939 = EDGE_CURVE('',#257931,#257940,#257942,.T.); +#257940 = VERTEX_POINT('',#257941); +#257941 = CARTESIAN_POINT('',(207.141374,-42.043158,1.585)); +#257942 = LINE('',#257943,#257944); +#257943 = CARTESIAN_POINT('',(206.897285,-42.770868,1.585)); +#257944 = VECTOR('',#257945,1.); +#257945 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#257946 = ORIENTED_EDGE('',*,*,#257947,.T.); +#257947 = EDGE_CURVE('',#257940,#257821,#257948,.T.); +#257948 = LINE('',#257949,#257950); +#257949 = CARTESIAN_POINT('',(207.141374,-42.043158,1.585)); +#257950 = VECTOR('',#257951,1.); +#257951 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#257952 = PLANE('',#257953); +#257953 = AXIS2_PLACEMENT_3D('',#257954,#257955,#257956); +#257954 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257955 = DIRECTION('',(0.,0.,1.)); +#257956 = DIRECTION('',(1.,0.,-0.)); +#257957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#257961)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#257958,#257959,#257960)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#257958 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#257959 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#257960 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#257961 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#257958, + 'distance_accuracy_value','confusion accuracy'); +#257962 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#257963,#257965); +#257963 = ( REPRESENTATION_RELATIONSHIP('','',#123054,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#257964) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#257964 = ITEM_DEFINED_TRANSFORMATION('','',#11,#495); +#257965 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #257966); +#257966 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('158','=>[0:1:1:69]','',#5, + #123049,$); +#257967 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#123051)); +#257968 = SHAPE_DEFINITION_REPRESENTATION(#257969,#257975); +#257969 = PRODUCT_DEFINITION_SHAPE('','',#257970); +#257970 = PRODUCT_DEFINITION('design','',#257971,#257974); +#257971 = PRODUCT_DEFINITION_FORMATION('','',#257972); +#257972 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_silkscreen', + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_silkscreen','',(#257973) + ); +#257973 = PRODUCT_CONTEXT('',#2,'mechanical'); +#257974 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#257975 = SHAPE_REPRESENTATION('',(#11,#257976,#258133,#258340,#258590, + #258741),#259282); +#257976 = SHELL_BASED_SURFACE_MODEL('',(#257977)); +#257977 = OPEN_SHELL('',(#257978)); +#257978 = ADVANCED_FACE('',(#257979),#258128,.T.); +#257979 = FACE_BOUND('',#257980,.T.); +#257980 = EDGE_LOOP('',(#257981,#257991,#257999,#258007,#258015,#258023, + #258031,#258039,#258048,#258056,#258064,#258072,#258080,#258089, + #258097,#258106,#258114,#258122)); +#257981 = ORIENTED_EDGE('',*,*,#257982,.T.); +#257982 = EDGE_CURVE('',#257983,#257985,#257987,.T.); +#257983 = VERTEX_POINT('',#257984); +#257984 = CARTESIAN_POINT('',(114.873433,-132.794831,-7.5E-02)); +#257985 = VERTEX_POINT('',#257986); +#257986 = CARTESIAN_POINT('',(114.911779,-132.77436,-7.5E-02)); +#257987 = LINE('',#257988,#257989); +#257988 = CARTESIAN_POINT('',(114.873433,-132.794831,-7.5E-02)); +#257989 = VECTOR('',#257990,1.); +#257990 = DIRECTION('',(0.882163732375,0.470942830163,0.)); +#257991 = ORIENTED_EDGE('',*,*,#257992,.T.); +#257992 = EDGE_CURVE('',#257985,#257993,#257995,.T.); +#257993 = VERTEX_POINT('',#257994); +#257994 = CARTESIAN_POINT('',(114.933695,-132.77436,-7.5E-02)); +#257995 = LINE('',#257996,#257997); +#257996 = CARTESIAN_POINT('',(114.911779,-132.77436,-7.5E-02)); +#257997 = VECTOR('',#257998,1.); +#257998 = DIRECTION('',(1.,0.,0.)); +#257999 = ORIENTED_EDGE('',*,*,#258000,.T.); +#258000 = EDGE_CURVE('',#257993,#258001,#258003,.T.); +#258001 = VERTEX_POINT('',#258002); +#258002 = CARTESIAN_POINT('',(114.968079,-132.785559,-7.5E-02)); +#258003 = LINE('',#258004,#258005); +#258004 = CARTESIAN_POINT('',(114.933695,-132.77436,-7.5E-02)); +#258005 = VECTOR('',#258006,1.); +#258006 = DIRECTION('',(0.950837159691,-0.309691291048,0.)); +#258007 = ORIENTED_EDGE('',*,*,#258008,.T.); +#258008 = EDGE_CURVE('',#258001,#258009,#258011,.T.); +#258009 = VERTEX_POINT('',#258010); +#258010 = CARTESIAN_POINT('',(114.988815,-132.806316,-7.5E-02)); +#258011 = LINE('',#258012,#258013); +#258012 = CARTESIAN_POINT('',(114.968079,-132.785559,-7.5E-02)); +#258013 = VECTOR('',#258014,1.); +#258014 = DIRECTION('',(0.706748817237,-0.707464564013,0.)); +#258015 = ORIENTED_EDGE('',*,*,#258016,.T.); +#258016 = EDGE_CURVE('',#258009,#258017,#258019,.T.); +#258017 = VERTEX_POINT('',#258018); +#258018 = CARTESIAN_POINT('',(115.079933,-132.942994,-7.5E-02)); +#258019 = LINE('',#258020,#258021); +#258020 = CARTESIAN_POINT('',(114.988815,-132.806316,-7.5E-02)); +#258021 = VECTOR('',#258022,1.); +#258022 = DIRECTION('',(0.554697386523,-0.832052167466,0.)); +#258023 = ORIENTED_EDGE('',*,*,#258024,.T.); +#258024 = EDGE_CURVE('',#258017,#258025,#258027,.T.); +#258025 = VERTEX_POINT('',#258026); +#258026 = CARTESIAN_POINT('',(115.161314,-133.024375,-7.5E-02)); +#258027 = LINE('',#258028,#258029); +#258028 = CARTESIAN_POINT('',(115.079933,-132.942994,-7.5E-02)); +#258029 = VECTOR('',#258030,1.); +#258030 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#258031 = ORIENTED_EDGE('',*,*,#258032,.T.); +#258032 = EDGE_CURVE('',#258025,#258033,#258035,.T.); +#258033 = VERTEX_POINT('',#258034); +#258034 = CARTESIAN_POINT('',(115.258109,-133.074383,-7.5E-02)); +#258035 = LINE('',#258036,#258037); +#258036 = CARTESIAN_POINT('',(115.161314,-133.024375,-7.5E-02)); +#258037 = VECTOR('',#258038,1.); +#258038 = DIRECTION('',(0.888436200035,-0.45900012905,0.)); +#258039 = ORIENTED_EDGE('',*,*,#258040,.T.); +#258040 = EDGE_CURVE('',#258033,#258041,#258043,.T.); +#258041 = VERTEX_POINT('',#258042); +#258042 = CARTESIAN_POINT('',(115.178584,-133.200715,-7.5E-02)); +#258043 = CIRCLE('',#258044,7.500029440361E-02); +#258044 = AXIS2_PLACEMENT_3D('',#258045,#258046,#258047); +#258045 = CARTESIAN_POINT('',(115.21212505397,-133.1336326486,-7.5E-02) + ); +#258046 = DIRECTION('',(0.,0.,-1.)); +#258047 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#258048 = ORIENTED_EDGE('',*,*,#258049,.T.); +#258049 = EDGE_CURVE('',#258041,#258050,#258052,.T.); +#258050 = VERTEX_POINT('',#258051); +#258051 = CARTESIAN_POINT('',(115.069604,-133.143767,-7.5E-02)); +#258052 = LINE('',#258053,#258054); +#258053 = CARTESIAN_POINT('',(115.178584,-133.200715,-7.5E-02)); +#258054 = VECTOR('',#258055,1.); +#258055 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#258056 = ORIENTED_EDGE('',*,*,#258057,.T.); +#258057 = EDGE_CURVE('',#258050,#258058,#258060,.T.); +#258058 = VERTEX_POINT('',#258059); +#258059 = CARTESIAN_POINT('',(115.001411,-133.076604,-7.5E-02)); +#258060 = LINE('',#258061,#258062); +#258061 = CARTESIAN_POINT('',(115.069604,-133.143767,-7.5E-02)); +#258062 = VECTOR('',#258063,1.); +#258063 = DIRECTION('',(-0.712466927177,0.70170569164,0.)); +#258064 = ORIENTED_EDGE('',*,*,#258065,.T.); +#258065 = EDGE_CURVE('',#258058,#258066,#258068,.T.); +#258066 = VERTEX_POINT('',#258067); +#258067 = CARTESIAN_POINT('',(115.001411,-133.772919,-7.5E-02)); +#258068 = LINE('',#258069,#258070); +#258069 = CARTESIAN_POINT('',(115.001411,-133.076604,-7.5E-02)); +#258070 = VECTOR('',#258071,1.); +#258071 = DIRECTION('',(0.,-1.,0.)); +#258072 = ORIENTED_EDGE('',*,*,#258073,.T.); +#258073 = EDGE_CURVE('',#258066,#258074,#258076,.T.); +#258074 = VERTEX_POINT('',#258075); +#258075 = CARTESIAN_POINT('',(115.226757,-133.77436,-7.5E-02)); +#258076 = LINE('',#258077,#258078); +#258077 = CARTESIAN_POINT('',(115.001411,-133.772919,-7.5E-02)); +#258078 = VECTOR('',#258079,1.); +#258079 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#258080 = ORIENTED_EDGE('',*,*,#258081,.T.); +#258081 = EDGE_CURVE('',#258074,#258082,#258084,.T.); +#258082 = VERTEX_POINT('',#258083); +#258083 = CARTESIAN_POINT('',(115.212125,-133.922919,-7.5E-02)); +#258084 = CIRCLE('',#258085,7.500006711463E-02); +#258085 = AXIS2_PLACEMENT_3D('',#258086,#258087,#258088); +#258086 = CARTESIAN_POINT('',(115.21212506711,-133.8479189328,-7.5E-02) + ); +#258087 = DIRECTION('',(0.,0.,-1.)); +#258088 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#258089 = ORIENTED_EDGE('',*,*,#258090,.T.); +#258090 = EDGE_CURVE('',#258082,#258091,#258093,.T.); +#258091 = VERTEX_POINT('',#258092); +#258092 = CARTESIAN_POINT('',(114.626065,-133.921478,-7.5E-02)); +#258093 = LINE('',#258094,#258095); +#258094 = CARTESIAN_POINT('',(115.212125,-133.922919,-7.5E-02)); +#258095 = VECTOR('',#258096,1.); +#258096 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#258097 = ORIENTED_EDGE('',*,*,#258098,.T.); +#258098 = EDGE_CURVE('',#258091,#258099,#258101,.T.); +#258099 = VERTEX_POINT('',#258100); +#258100 = CARTESIAN_POINT('',(114.640697,-133.772919,-7.5E-02)); +#258101 = CIRCLE('',#258102,7.500006711464E-02); +#258102 = AXIS2_PLACEMENT_3D('',#258103,#258104,#258105); +#258103 = CARTESIAN_POINT('',(114.64069693288,-133.8479190671,-7.5E-02) + ); +#258104 = DIRECTION('',(0.,0.,-1.)); +#258105 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#258106 = ORIENTED_EDGE('',*,*,#258107,.T.); +#258107 = EDGE_CURVE('',#258099,#258108,#258110,.T.); +#258108 = VERTEX_POINT('',#258109); +#258109 = CARTESIAN_POINT('',(114.851411,-133.772919,-7.5E-02)); +#258110 = LINE('',#258111,#258112); +#258111 = CARTESIAN_POINT('',(114.640697,-133.772919,-7.5E-02)); +#258112 = VECTOR('',#258113,1.); +#258113 = DIRECTION('',(1.,0.,0.)); +#258114 = ORIENTED_EDGE('',*,*,#258115,.T.); +#258115 = EDGE_CURVE('',#258108,#258116,#258118,.T.); +#258116 = VERTEX_POINT('',#258117); +#258117 = CARTESIAN_POINT('',(114.852852,-132.833287,-7.5E-02)); +#258118 = LINE('',#258119,#258120); +#258119 = CARTESIAN_POINT('',(114.851411,-133.772919,-7.5E-02)); +#258120 = VECTOR('',#258121,1.); +#258121 = DIRECTION('',(1.533577299926E-03,0.99999882407,0.)); +#258122 = ORIENTED_EDGE('',*,*,#258123,.T.); +#258123 = EDGE_CURVE('',#258116,#257983,#258124,.T.); +#258124 = LINE('',#258125,#258126); +#258125 = CARTESIAN_POINT('',(114.852852,-132.833287,-7.5E-02)); +#258126 = VECTOR('',#258127,1.); +#258127 = DIRECTION('',(0.471857451169,0.881674852639,0.)); +#258128 = PLANE('',#258129); +#258129 = AXIS2_PLACEMENT_3D('',#258130,#258131,#258132); +#258130 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258131 = DIRECTION('',(-0.,-0.,-1.)); +#258132 = DIRECTION('',(-1.,0.,0.)); +#258133 = SHELL_BASED_SURFACE_MODEL('',(#258134)); +#258134 = OPEN_SHELL('',(#258135)); +#258135 = ADVANCED_FACE('',(#258136,#258252),#258335,.T.); +#258136 = FACE_BOUND('',#258137,.T.); +#258137 = EDGE_LOOP('',(#258138,#258148,#258156,#258164,#258173,#258181, + #258190,#258198,#258206,#258214,#258222,#258230,#258238,#258246)); +#258138 = ORIENTED_EDGE('',*,*,#258139,.T.); +#258139 = EDGE_CURVE('',#258140,#258142,#258144,.T.); +#258140 = VERTEX_POINT('',#258141); +#258141 = CARTESIAN_POINT('',(115.630564,-132.943492,-7.5E-02)); +#258142 = VERTEX_POINT('',#258143); +#258143 = CARTESIAN_POINT('',(115.746411,-132.830381,-7.5E-02)); +#258144 = LINE('',#258145,#258146); +#258145 = CARTESIAN_POINT('',(115.630564,-132.943492,-7.5E-02)); +#258146 = VECTOR('',#258147,1.); +#258147 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#258148 = ORIENTED_EDGE('',*,*,#258149,.T.); +#258149 = EDGE_CURVE('',#258142,#258150,#258152,.T.); +#258150 = VERTEX_POINT('',#258151); +#258151 = CARTESIAN_POINT('',(115.919004,-132.773648,-7.5E-02)); +#258152 = LINE('',#258153,#258154); +#258153 = CARTESIAN_POINT('',(115.746411,-132.830381,-7.5E-02)); +#258154 = VECTOR('',#258155,1.); +#258155 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#258156 = ORIENTED_EDGE('',*,*,#258157,.T.); +#258157 = EDGE_CURVE('',#258150,#258158,#258160,.T.); +#258158 = VERTEX_POINT('',#258159); +#258159 = CARTESIAN_POINT('',(116.179138,-132.77436,-7.5E-02)); +#258160 = LINE('',#258161,#258162); +#258161 = CARTESIAN_POINT('',(115.919004,-132.773648,-7.5E-02)); +#258162 = VECTOR('',#258163,1.); +#258163 = DIRECTION('',(0.999996254297,-2.737040652328E-03,0.)); +#258164 = ORIENTED_EDGE('',*,*,#258165,.T.); +#258165 = EDGE_CURVE('',#258158,#258166,#258168,.T.); +#258166 = VERTEX_POINT('',#258167); +#258167 = CARTESIAN_POINT('',(116.239506,-132.847919,-7.5E-02)); +#258168 = CIRCLE('',#258169,7.500074938985E-02); +#258169 = AXIS2_PLACEMENT_3D('',#258170,#258171,#258172); +#258170 = CARTESIAN_POINT('',(116.16450525061,-132.8479194661,-7.5E-02) + ); +#258171 = DIRECTION('',(0.,0.,-1.)); +#258172 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#258173 = ORIENTED_EDGE('',*,*,#258174,.T.); +#258174 = EDGE_CURVE('',#258166,#258175,#258177,.T.); +#258175 = VERTEX_POINT('',#258176); +#258176 = CARTESIAN_POINT('',(116.238065,-133.862551,-7.5E-02)); +#258177 = LINE('',#258178,#258179); +#258178 = CARTESIAN_POINT('',(116.239506,-132.847919,-7.5E-02)); +#258179 = VECTOR('',#258180,1.); +#258180 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#258181 = ORIENTED_EDGE('',*,*,#258182,.T.); +#258182 = EDGE_CURVE('',#258175,#258183,#258185,.T.); +#258183 = VERTEX_POINT('',#258184); +#258184 = CARTESIAN_POINT('',(116.164506,-133.922919,-7.5E-02)); +#258185 = CIRCLE('',#258186,7.500074938986E-02); +#258186 = AXIS2_PLACEMENT_3D('',#258187,#258188,#258189); +#258187 = CARTESIAN_POINT('',(116.16450553389,-133.8479182506,-7.5E-02) + ); +#258188 = DIRECTION('',(0.,0.,-1.)); +#258189 = DIRECTION('',(0.980783081614,-0.195101375752,0.)); +#258190 = ORIENTED_EDGE('',*,*,#258191,.T.); +#258191 = EDGE_CURVE('',#258183,#258192,#258194,.T.); +#258192 = VERTEX_POINT('',#258193); +#258193 = CARTESIAN_POINT('',(115.909948,-133.920719,-7.5E-02)); +#258194 = LINE('',#258195,#258196); +#258195 = CARTESIAN_POINT('',(116.164506,-133.922919,-7.5E-02)); +#258196 = VECTOR('',#258197,1.); +#258197 = DIRECTION('',(-0.999962656283,8.642108454025E-03,0.)); +#258198 = ORIENTED_EDGE('',*,*,#258199,.T.); +#258199 = EDGE_CURVE('',#258192,#258200,#258202,.T.); +#258200 = VERTEX_POINT('',#258201); +#258201 = CARTESIAN_POINT('',(115.741886,-133.862661,-7.5E-02)); +#258202 = LINE('',#258203,#258204); +#258203 = CARTESIAN_POINT('',(115.909948,-133.920719,-7.5E-02)); +#258204 = VECTOR('',#258205,1.); +#258205 = DIRECTION('',(-0.945189826766,0.32652134904,0.)); +#258206 = ORIENTED_EDGE('',*,*,#258207,.T.); +#258207 = EDGE_CURVE('',#258200,#258208,#258210,.T.); +#258208 = VERTEX_POINT('',#258209); +#258209 = CARTESIAN_POINT('',(115.625197,-133.744898,-7.5E-02)); +#258210 = LINE('',#258211,#258212); +#258211 = CARTESIAN_POINT('',(115.741886,-133.862661,-7.5E-02)); +#258212 = VECTOR('',#258213,1.); +#258213 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#258214 = ORIENTED_EDGE('',*,*,#258215,.T.); +#258215 = EDGE_CURVE('',#258208,#258216,#258218,.T.); +#258216 = VERTEX_POINT('',#258217); +#258217 = CARTESIAN_POINT('',(115.567936,-133.628013,-7.5E-02)); +#258218 = LINE('',#258219,#258220); +#258219 = CARTESIAN_POINT('',(115.625197,-133.744898,-7.5E-02)); +#258220 = VECTOR('',#258221,1.); +#258221 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#258222 = ORIENTED_EDGE('',*,*,#258223,.T.); +#258223 = EDGE_CURVE('',#258216,#258224,#258226,.T.); +#258224 = VERTEX_POINT('',#258225); +#258225 = CARTESIAN_POINT('',(115.518078,-133.419347,-7.5E-02)); +#258226 = LINE('',#258227,#258228); +#258227 = CARTESIAN_POINT('',(115.567936,-133.628013,-7.5E-02)); +#258228 = VECTOR('',#258229,1.); +#258229 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#258230 = ORIENTED_EDGE('',*,*,#258231,.T.); +#258231 = EDGE_CURVE('',#258224,#258232,#258234,.T.); +#258232 = VERTEX_POINT('',#258233); +#258233 = CARTESIAN_POINT('',(115.520317,-133.2583,-7.5E-02)); +#258234 = LINE('',#258235,#258236); +#258235 = CARTESIAN_POINT('',(115.518078,-133.419347,-7.5E-02)); +#258236 = VECTOR('',#258237,1.); +#258237 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#258238 = ORIENTED_EDGE('',*,*,#258239,.T.); +#258239 = EDGE_CURVE('',#258232,#258240,#258242,.T.); +#258240 = VERTEX_POINT('',#258241); +#258241 = CARTESIAN_POINT('',(115.573615,-133.052473,-7.5E-02)); +#258242 = LINE('',#258243,#258244); +#258243 = CARTESIAN_POINT('',(115.520317,-133.2583,-7.5E-02)); +#258244 = VECTOR('',#258245,1.); +#258245 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#258246 = ORIENTED_EDGE('',*,*,#258247,.T.); +#258247 = EDGE_CURVE('',#258240,#258140,#258248,.T.); +#258248 = LINE('',#258249,#258250); +#258249 = CARTESIAN_POINT('',(115.573615,-133.052473,-7.5E-02)); +#258250 = VECTOR('',#258251,1.); +#258251 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#258252 = FACE_BOUND('',#258253,.T.); +#258253 = EDGE_LOOP('',(#258254,#258264,#258272,#258280,#258288,#258297, + #258305,#258313,#258321,#258329)); +#258254 = ORIENTED_EDGE('',*,*,#258255,.T.); +#258255 = EDGE_CURVE('',#258256,#258258,#258260,.T.); +#258256 = VERTEX_POINT('',#258257); +#258257 = CARTESIAN_POINT('',(116.089506,-133.772919,-7.5E-02)); +#258258 = VERTEX_POINT('',#258259); +#258259 = CARTESIAN_POINT('',(116.089506,-132.922919,-7.5E-02)); +#258260 = LINE('',#258261,#258262); +#258261 = CARTESIAN_POINT('',(116.089506,-133.772919,-7.5E-02)); +#258262 = VECTOR('',#258263,1.); +#258263 = DIRECTION('',(0.,1.,0.)); +#258264 = ORIENTED_EDGE('',*,*,#258265,.T.); +#258265 = EDGE_CURVE('',#258258,#258266,#258268,.T.); +#258266 = VERTEX_POINT('',#258267); +#258267 = CARTESIAN_POINT('',(115.938581,-132.922919,-7.5E-02)); +#258268 = LINE('',#258269,#258270); +#258269 = CARTESIAN_POINT('',(116.089506,-132.922919,-7.5E-02)); +#258270 = VECTOR('',#258271,1.); +#258271 = DIRECTION('',(-1.,0.,0.)); +#258272 = ORIENTED_EDGE('',*,*,#258273,.T.); +#258273 = EDGE_CURVE('',#258266,#258274,#258276,.T.); +#258274 = VERTEX_POINT('',#258275); +#258275 = CARTESIAN_POINT('',(115.824068,-132.96109,-7.5E-02)); +#258276 = LINE('',#258277,#258278); +#258277 = CARTESIAN_POINT('',(115.938581,-132.922919,-7.5E-02)); +#258278 = VECTOR('',#258279,1.); +#258279 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#258280 = ORIENTED_EDGE('',*,*,#258281,.T.); +#258281 = EDGE_CURVE('',#258274,#258282,#258284,.T.); +#258282 = VERTEX_POINT('',#258283); +#258283 = CARTESIAN_POINT('',(115.749955,-133.035203,-7.5E-02)); +#258284 = LINE('',#258285,#258286); +#258285 = CARTESIAN_POINT('',(115.824068,-132.96109,-7.5E-02)); +#258286 = VECTOR('',#258287,1.); +#258287 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#258288 = ORIENTED_EDGE('',*,*,#258289,.T.); +#258289 = EDGE_CURVE('',#258282,#258290,#258292,.T.); +#258290 = VERTEX_POINT('',#258291); +#258291 = CARTESIAN_POINT('',(115.668078,-133.410113,-7.5E-02)); +#258292 = CIRCLE('',#258293,0.611712714363); +#258293 = AXIS2_PLACEMENT_3D('',#258294,#258295,#258296); +#258294 = CARTESIAN_POINT('',(116.27648327521,-133.3465876822,-7.5E-02) + ); +#258295 = DIRECTION('',(0.,0.,1.)); +#258296 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#258297 = ORIENTED_EDGE('',*,*,#258298,.T.); +#258298 = EDGE_CURVE('',#258290,#258299,#258301,.T.); +#258299 = VERTEX_POINT('',#258300); +#258300 = CARTESIAN_POINT('',(115.711461,-133.583647,-7.5E-02)); +#258301 = LINE('',#258302,#258303); +#258302 = CARTESIAN_POINT('',(115.668078,-133.410113,-7.5E-02)); +#258303 = VECTOR('',#258304,1.); +#258304 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#258305 = ORIENTED_EDGE('',*,*,#258306,.T.); +#258306 = EDGE_CURVE('',#258299,#258307,#258309,.T.); +#258307 = VERTEX_POINT('',#258308); +#258308 = CARTESIAN_POINT('',(115.749955,-133.660634,-7.5E-02)); +#258309 = LINE('',#258310,#258311); +#258310 = CARTESIAN_POINT('',(115.711461,-133.583647,-7.5E-02)); +#258311 = VECTOR('',#258312,1.); +#258312 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#258313 = ORIENTED_EDGE('',*,*,#258314,.T.); +#258314 = EDGE_CURVE('',#258307,#258315,#258317,.T.); +#258315 = VERTEX_POINT('',#258316); +#258316 = CARTESIAN_POINT('',(115.824068,-133.734748,-7.5E-02)); +#258317 = LINE('',#258318,#258319); +#258318 = CARTESIAN_POINT('',(115.749955,-133.660634,-7.5E-02)); +#258319 = VECTOR('',#258320,1.); +#258320 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#258321 = ORIENTED_EDGE('',*,*,#258322,.T.); +#258322 = EDGE_CURVE('',#258315,#258323,#258325,.T.); +#258323 = VERTEX_POINT('',#258324); +#258324 = CARTESIAN_POINT('',(115.938581,-133.772919,-7.5E-02)); +#258325 = LINE('',#258326,#258327); +#258326 = CARTESIAN_POINT('',(115.824068,-133.734748,-7.5E-02)); +#258327 = VECTOR('',#258328,1.); +#258328 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#258329 = ORIENTED_EDGE('',*,*,#258330,.T.); +#258330 = EDGE_CURVE('',#258323,#258256,#258331,.T.); +#258331 = LINE('',#258332,#258333); +#258332 = CARTESIAN_POINT('',(115.938581,-133.772919,-7.5E-02)); +#258333 = VECTOR('',#258334,1.); +#258334 = DIRECTION('',(1.,0.,0.)); +#258335 = PLANE('',#258336); +#258336 = AXIS2_PLACEMENT_3D('',#258337,#258338,#258339); +#258337 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258338 = DIRECTION('',(-0.,-0.,-1.)); +#258339 = DIRECTION('',(-1.,0.,0.)); +#258340 = SHELL_BASED_SURFACE_MODEL('',(#258341)); +#258341 = OPEN_SHELL('',(#258342)); +#258342 = ADVANCED_FACE('',(#258343,#258515),#258585,.T.); +#258343 = FACE_BOUND('',#258344,.T.); +#258344 = EDGE_LOOP('',(#258345,#258355,#258363,#258371,#258379,#258387, + #258395,#258403,#258411,#258419,#258427,#258436,#258444,#258452, + #258460,#258468,#258476,#258484,#258492,#258500,#258509)); +#258345 = ORIENTED_EDGE('',*,*,#258346,.T.); +#258346 = EDGE_CURVE('',#258347,#258349,#258351,.T.); +#258347 = VERTEX_POINT('',#258348); +#258348 = CARTESIAN_POINT('',(116.788768,-132.787747,-7.5E-02)); +#258349 = VERTEX_POINT('',#258350); +#258350 = CARTESIAN_POINT('',(116.816541,-132.77436,-7.5E-02)); +#258351 = LINE('',#258352,#258353); +#258352 = CARTESIAN_POINT('',(116.788768,-132.787747,-7.5E-02)); +#258353 = VECTOR('',#258354,1.); +#258354 = DIRECTION('',(0.900813766444,0.434205663464,0.)); +#258355 = ORIENTED_EDGE('',*,*,#258356,.T.); +#258356 = EDGE_CURVE('',#258349,#258357,#258359,.T.); +#258357 = VERTEX_POINT('',#258358); +#258358 = CARTESIAN_POINT('',(117.036281,-132.77436,-7.5E-02)); +#258359 = LINE('',#258360,#258361); +#258360 = CARTESIAN_POINT('',(116.816541,-132.77436,-7.5E-02)); +#258361 = VECTOR('',#258362,1.); +#258362 = DIRECTION('',(1.,0.,0.)); +#258363 = ORIENTED_EDGE('',*,*,#258364,.T.); +#258364 = EDGE_CURVE('',#258357,#258365,#258367,.T.); +#258365 = VERTEX_POINT('',#258366); +#258366 = CARTESIAN_POINT('',(117.16417,-132.837786,-7.5E-02)); +#258367 = LINE('',#258368,#258369); +#258368 = CARTESIAN_POINT('',(117.036281,-132.77436,-7.5E-02)); +#258369 = VECTOR('',#258370,1.); +#258370 = DIRECTION('',(0.895875328998,-0.444305519764,0.)); +#258371 = ORIENTED_EDGE('',*,*,#258372,.T.); +#258372 = EDGE_CURVE('',#258365,#258373,#258375,.T.); +#258373 = VERTEX_POINT('',#258374); +#258374 = CARTESIAN_POINT('',(117.274486,-132.949108,-7.5E-02)); +#258375 = LINE('',#258376,#258377); +#258376 = CARTESIAN_POINT('',(117.16417,-132.837786,-7.5E-02)); +#258377 = VECTOR('',#258378,1.); +#258378 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#258379 = ORIENTED_EDGE('',*,*,#258380,.T.); +#258380 = EDGE_CURVE('',#258373,#258381,#258383,.T.); +#258381 = VERTEX_POINT('',#258382); +#258382 = CARTESIAN_POINT('',(117.284886,-132.972586,-7.5E-02)); +#258383 = LINE('',#258384,#258385); +#258384 = CARTESIAN_POINT('',(117.274486,-132.949108,-7.5E-02)); +#258385 = VECTOR('',#258386,1.); +#258386 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#258387 = ORIENTED_EDGE('',*,*,#258388,.T.); +#258388 = EDGE_CURVE('',#258381,#258389,#258391,.T.); +#258389 = VERTEX_POINT('',#258390); +#258390 = CARTESIAN_POINT('',(117.334744,-133.181252,-7.5E-02)); +#258391 = LINE('',#258392,#258393); +#258392 = CARTESIAN_POINT('',(117.284886,-132.972586,-7.5E-02)); +#258393 = VECTOR('',#258394,1.); +#258394 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#258395 = ORIENTED_EDGE('',*,*,#258396,.T.); +#258396 = EDGE_CURVE('',#258389,#258397,#258399,.T.); +#258397 = VERTEX_POINT('',#258398); +#258398 = CARTESIAN_POINT('',(117.332505,-133.532775,-7.5E-02)); +#258399 = LINE('',#258400,#258401); +#258400 = CARTESIAN_POINT('',(117.334744,-133.181252,-7.5E-02)); +#258401 = VECTOR('',#258402,1.); +#258402 = DIRECTION('',(-6.369297552994E-03,-0.999979715819,0.)); +#258403 = ORIENTED_EDGE('',*,*,#258404,.T.); +#258404 = EDGE_CURVE('',#258397,#258405,#258407,.T.); +#258405 = VERTEX_POINT('',#258406); +#258406 = CARTESIAN_POINT('',(117.279939,-133.737097,-7.5E-02)); +#258407 = LINE('',#258408,#258409); +#258408 = CARTESIAN_POINT('',(117.332505,-133.532775,-7.5E-02)); +#258409 = VECTOR('',#258410,1.); +#258410 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#258411 = ORIENTED_EDGE('',*,*,#258412,.T.); +#258412 = EDGE_CURVE('',#258405,#258413,#258415,.T.); +#258413 = VERTEX_POINT('',#258414); +#258414 = CARTESIAN_POINT('',(117.265159,-133.758093,-7.5E-02)); +#258415 = LINE('',#258416,#258417); +#258416 = CARTESIAN_POINT('',(117.279939,-133.737097,-7.5E-02)); +#258417 = VECTOR('',#258418,1.); +#258418 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#258419 = ORIENTED_EDGE('',*,*,#258420,.T.); +#258420 = EDGE_CURVE('',#258413,#258421,#258423,.T.); +#258421 = VERTEX_POINT('',#258422); +#258422 = CARTESIAN_POINT('',(117.156727,-133.863417,-7.5E-02)); +#258423 = LINE('',#258424,#258425); +#258424 = CARTESIAN_POINT('',(117.265159,-133.758093,-7.5E-02)); +#258425 = VECTOR('',#258426,1.); +#258426 = DIRECTION('',(-0.717312253834,-0.696751842839,0.)); +#258427 = ORIENTED_EDGE('',*,*,#258428,.T.); +#258428 = EDGE_CURVE('',#258421,#258429,#258431,.T.); +#258429 = VERTEX_POINT('',#258430); +#258430 = CARTESIAN_POINT('',(116.688652,-133.858053,-7.5E-02)); +#258431 = CIRCLE('',#258432,0.397466426085); +#258432 = AXIS2_PLACEMENT_3D('',#258433,#258434,#258435); +#258433 = CARTESIAN_POINT('',(116.92637063855,-133.5395103674,-7.5E-02) + ); +#258434 = DIRECTION('',(-0.,0.,-1.)); +#258435 = DIRECTION('',(0.579561810326,-0.814928283968,-0.)); +#258436 = ORIENTED_EDGE('',*,*,#258437,.T.); +#258437 = EDGE_CURVE('',#258429,#258438,#258440,.T.); +#258438 = VERTEX_POINT('',#258439); +#258439 = CARTESIAN_POINT('',(116.578336,-133.746728,-7.5E-02)); +#258440 = LINE('',#258441,#258442); +#258441 = CARTESIAN_POINT('',(116.688652,-133.858053,-7.5E-02)); +#258442 = VECTOR('',#258443,1.); +#258443 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#258444 = ORIENTED_EDGE('',*,*,#258445,.T.); +#258445 = EDGE_CURVE('',#258438,#258446,#258448,.T.); +#258446 = VERTEX_POINT('',#258447); +#258447 = CARTESIAN_POINT('',(116.567936,-133.723251,-7.5E-02)); +#258448 = LINE('',#258449,#258450); +#258449 = CARTESIAN_POINT('',(116.578336,-133.746728,-7.5E-02)); +#258450 = VECTOR('',#258451,1.); +#258451 = DIRECTION('',(-0.405025228745,0.91430550916,0.)); +#258452 = ORIENTED_EDGE('',*,*,#258453,.T.); +#258453 = EDGE_CURVE('',#258446,#258454,#258456,.T.); +#258454 = VERTEX_POINT('',#258455); +#258455 = CARTESIAN_POINT('',(116.518078,-133.514585,-7.5E-02)); +#258456 = LINE('',#258457,#258458); +#258457 = CARTESIAN_POINT('',(116.567936,-133.723251,-7.5E-02)); +#258458 = VECTOR('',#258459,1.); +#258459 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#258460 = ORIENTED_EDGE('',*,*,#258461,.T.); +#258461 = EDGE_CURVE('',#258454,#258462,#258464,.T.); +#258462 = VERTEX_POINT('',#258463); +#258463 = CARTESIAN_POINT('',(116.520317,-133.163062,-7.5E-02)); +#258464 = LINE('',#258465,#258466); +#258465 = CARTESIAN_POINT('',(116.518078,-133.514585,-7.5E-02)); +#258466 = VECTOR('',#258467,1.); +#258467 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#258468 = ORIENTED_EDGE('',*,*,#258469,.T.); +#258469 = EDGE_CURVE('',#258462,#258470,#258472,.T.); +#258470 = VERTEX_POINT('',#258471); +#258471 = CARTESIAN_POINT('',(116.572883,-132.95874,-7.5E-02)); +#258472 = LINE('',#258473,#258474); +#258473 = CARTESIAN_POINT('',(116.520317,-133.163062,-7.5E-02)); +#258474 = VECTOR('',#258475,1.); +#258475 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#258476 = ORIENTED_EDGE('',*,*,#258477,.T.); +#258477 = EDGE_CURVE('',#258470,#258478,#258480,.T.); +#258478 = VERTEX_POINT('',#258479); +#258479 = CARTESIAN_POINT('',(116.587664,-132.937743,-7.5E-02)); +#258480 = LINE('',#258481,#258482); +#258481 = CARTESIAN_POINT('',(116.572883,-132.95874,-7.5E-02)); +#258482 = VECTOR('',#258483,1.); +#258483 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#258484 = ORIENTED_EDGE('',*,*,#258485,.T.); +#258485 = EDGE_CURVE('',#258478,#258486,#258488,.T.); +#258486 = VERTEX_POINT('',#258487); +#258487 = CARTESIAN_POINT('',(116.607703,-132.918278,-7.5E-02)); +#258488 = LINE('',#258489,#258490); +#258489 = CARTESIAN_POINT('',(116.587664,-132.937743,-7.5E-02)); +#258490 = VECTOR('',#258491,1.); +#258491 = DIRECTION('',(0.717305448961,0.696758848448,0.)); +#258492 = ORIENTED_EDGE('',*,*,#258493,.T.); +#258493 = EDGE_CURVE('',#258486,#258494,#258496,.T.); +#258494 = VERTEX_POINT('',#258495); +#258495 = CARTESIAN_POINT('',(116.612386,-132.920218,-7.5E-02)); +#258496 = LINE('',#258497,#258498); +#258497 = CARTESIAN_POINT('',(116.607703,-132.918278,-7.5E-02)); +#258498 = VECTOR('',#258499,1.); +#258499 = DIRECTION('',(0.923862939217,-0.382723489664,0.)); +#258500 = ORIENTED_EDGE('',*,*,#258501,.T.); +#258501 = EDGE_CURVE('',#258494,#258502,#258504,.T.); +#258502 = VERTEX_POINT('',#258503); +#258503 = CARTESIAN_POINT('',(116.788768,-132.802364,-7.5E-02)); +#258504 = CIRCLE('',#258505,0.150000292066); +#258505 = AXIS2_PLACEMENT_3D('',#258506,#258507,#258508); +#258506 = CARTESIAN_POINT('',(116.64165,-132.7731,-7.5E-02)); +#258507 = DIRECTION('',(0.,0.,1.)); +#258508 = DIRECTION('',(-0.195092953466,-0.980784756972,0.)); +#258509 = ORIENTED_EDGE('',*,*,#258510,.T.); +#258510 = EDGE_CURVE('',#258502,#258347,#258511,.T.); +#258511 = LINE('',#258512,#258513); +#258512 = CARTESIAN_POINT('',(116.788768,-132.802364,-7.5E-02)); +#258513 = VECTOR('',#258514,1.); +#258514 = DIRECTION('',(0.,1.,0.)); +#258515 = FACE_BOUND('',#258516,.T.); +#258516 = EDGE_LOOP('',(#258517,#258528,#258536,#258545,#258553,#258562, + #258570,#258579)); +#258517 = ORIENTED_EDGE('',*,*,#258518,.T.); +#258518 = EDGE_CURVE('',#258519,#258521,#258523,.T.); +#258519 = VERTEX_POINT('',#258520); +#258520 = CARTESIAN_POINT('',(117.07246,-132.957177,-7.5E-02)); +#258521 = VERTEX_POINT('',#258522); +#258522 = CARTESIAN_POINT('',(116.780362,-132.957177,-7.5E-02)); +#258523 = CIRCLE('',#258524,0.252889603602); +#258524 = AXIS2_PLACEMENT_3D('',#258525,#258526,#258527); +#258525 = CARTESIAN_POINT('',(116.926411,-133.16363,-7.5E-02)); +#258526 = DIRECTION('',(0.,0.,1.)); +#258527 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#258528 = ORIENTED_EDGE('',*,*,#258529,.T.); +#258529 = EDGE_CURVE('',#258521,#258530,#258532,.T.); +#258530 = VERTEX_POINT('',#258531); +#258531 = CARTESIAN_POINT('',(116.708419,-133.029119,-7.5E-02)); +#258532 = LINE('',#258533,#258534); +#258533 = CARTESIAN_POINT('',(116.780362,-132.957177,-7.5E-02)); +#258534 = VECTOR('',#258535,1.); +#258535 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#258536 = ORIENTED_EDGE('',*,*,#258537,.T.); +#258537 = EDGE_CURVE('',#258530,#258538,#258540,.T.); +#258538 = VERTEX_POINT('',#258539); +#258539 = CARTESIAN_POINT('',(116.708419,-133.666717,-7.5E-02)); +#258540 = CIRCLE('',#258541,0.985308713638); +#258541 = AXIS2_PLACEMENT_3D('',#258542,#258543,#258544); +#258542 = CARTESIAN_POINT('',(117.6407282077,-133.347918,-7.5E-02)); +#258543 = DIRECTION('',(0.,0.,1.)); +#258544 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#258545 = ORIENTED_EDGE('',*,*,#258546,.T.); +#258546 = EDGE_CURVE('',#258538,#258547,#258549,.T.); +#258547 = VERTEX_POINT('',#258548); +#258548 = CARTESIAN_POINT('',(116.780362,-133.738661,-7.5E-02)); +#258549 = LINE('',#258550,#258551); +#258550 = CARTESIAN_POINT('',(116.708419,-133.666717,-7.5E-02)); +#258551 = VECTOR('',#258552,1.); +#258552 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#258553 = ORIENTED_EDGE('',*,*,#258554,.T.); +#258554 = EDGE_CURVE('',#258547,#258555,#258557,.T.); +#258555 = VERTEX_POINT('',#258556); +#258556 = CARTESIAN_POINT('',(117.072459,-133.738661,-7.5E-02)); +#258557 = CIRCLE('',#258558,0.252888498466); +#258558 = AXIS2_PLACEMENT_3D('',#258559,#258560,#258561); +#258559 = CARTESIAN_POINT('',(116.9264105,-133.532209,-7.5E-02)); +#258560 = DIRECTION('',(0.,0.,1.)); +#258561 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#258562 = ORIENTED_EDGE('',*,*,#258563,.T.); +#258563 = EDGE_CURVE('',#258555,#258564,#258566,.T.); +#258564 = VERTEX_POINT('',#258565); +#258565 = CARTESIAN_POINT('',(117.144402,-133.666717,-7.5E-02)); +#258566 = LINE('',#258567,#258568); +#258567 = CARTESIAN_POINT('',(117.072459,-133.738661,-7.5E-02)); +#258568 = VECTOR('',#258569,1.); +#258569 = DIRECTION('',(0.707101866849,0.70711169549,0.)); +#258570 = ORIENTED_EDGE('',*,*,#258571,.T.); +#258571 = EDGE_CURVE('',#258564,#258572,#258574,.T.); +#258572 = VERTEX_POINT('',#258573); +#258573 = CARTESIAN_POINT('',(117.144402,-133.029119,-7.5E-02)); +#258574 = CIRCLE('',#258575,0.985282207896); +#258575 = AXIS2_PLACEMENT_3D('',#258576,#258577,#258578); +#258576 = CARTESIAN_POINT('',(116.21212080486,-133.347918,-7.5E-02)); +#258577 = DIRECTION('',(0.,-0.,1.)); +#258578 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#258579 = ORIENTED_EDGE('',*,*,#258580,.T.); +#258580 = EDGE_CURVE('',#258572,#258519,#258581,.T.); +#258581 = LINE('',#258582,#258583); +#258582 = CARTESIAN_POINT('',(117.144402,-133.029119,-7.5E-02)); +#258583 = VECTOR('',#258584,1.); +#258584 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#258585 = PLANE('',#258586); +#258586 = AXIS2_PLACEMENT_3D('',#258587,#258588,#258589); +#258587 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258588 = DIRECTION('',(-0.,-0.,-1.)); +#258589 = DIRECTION('',(-1.,0.,0.)); +#258590 = SHELL_BASED_SURFACE_MODEL('',(#258591)); +#258591 = OPEN_SHELL('',(#258592)); +#258592 = ADVANCED_FACE('',(#258593),#258736,.T.); +#258593 = FACE_BOUND('',#258594,.T.); +#258594 = EDGE_LOOP('',(#258595,#258605,#258613,#258621,#258630,#258638, + #258646,#258655,#258663,#258671,#258680,#258688,#258696,#258705, + #258713,#258722,#258730)); +#258595 = ORIENTED_EDGE('',*,*,#258596,.T.); +#258596 = EDGE_CURVE('',#258597,#258599,#258601,.T.); +#258597 = VERTEX_POINT('',#258598); +#258598 = CARTESIAN_POINT('',(118.294512,-132.803552,-7.5E-02)); +#258599 = VERTEX_POINT('',#258600); +#258600 = CARTESIAN_POINT('',(118.316093,-132.783789,-7.5E-02)); +#258601 = LINE('',#258602,#258603); +#258602 = CARTESIAN_POINT('',(118.294512,-132.803552,-7.5E-02)); +#258603 = VECTOR('',#258604,1.); +#258604 = DIRECTION('',(0.737487398394,0.675360894048,0.)); +#258605 = ORIENTED_EDGE('',*,*,#258606,.T.); +#258606 = EDGE_CURVE('',#258599,#258607,#258609,.T.); +#258607 = VERTEX_POINT('',#258608); +#258608 = CARTESIAN_POINT('',(118.343594,-132.773788,-7.5E-02)); +#258609 = LINE('',#258610,#258611); +#258610 = CARTESIAN_POINT('',(118.316093,-132.783789,-7.5E-02)); +#258611 = VECTOR('',#258612,1.); +#258612 = DIRECTION('',(0.939786439068,0.341762269631,0.)); +#258613 = ORIENTED_EDGE('',*,*,#258614,.T.); +#258614 = EDGE_CURVE('',#258607,#258615,#258617,.T.); +#258615 = VERTEX_POINT('',#258616); +#258616 = CARTESIAN_POINT('',(118.356608,-132.77436,-7.5E-02)); +#258617 = LINE('',#258618,#258619); +#258618 = CARTESIAN_POINT('',(118.343594,-132.773788,-7.5E-02)); +#258619 = VECTOR('',#258620,1.); +#258620 = DIRECTION('',(0.999035478808,-4.391027308159E-02,0.)); +#258621 = ORIENTED_EDGE('',*,*,#258622,.T.); +#258622 = EDGE_CURVE('',#258615,#258623,#258625,.T.); +#258623 = VERTEX_POINT('',#258624); +#258624 = CARTESIAN_POINT('',(118.423559,-132.82126,-7.5E-02)); +#258625 = CIRCLE('',#258626,7.357142838944E-02); +#258626 = AXIS2_PLACEMENT_3D('',#258627,#258628,#258629); +#258627 = CARTESIAN_POINT('',(118.35498535861,-132.8479135322,-7.5E-02) + ); +#258628 = DIRECTION('',(0.,0.,-1.)); +#258629 = DIRECTION('',(2.205531982089E-02,0.999756751849,0.)); +#258630 = ORIENTED_EDGE('',*,*,#258631,.T.); +#258631 = EDGE_CURVE('',#258623,#258632,#258634,.T.); +#258632 = VERTEX_POINT('',#258633); +#258633 = CARTESIAN_POINT('',(118.429982,-132.847919,-7.5E-02)); +#258634 = LINE('',#258635,#258636); +#258635 = CARTESIAN_POINT('',(118.423559,-132.82126,-7.5E-02)); +#258636 = VECTOR('',#258637,1.); +#258637 = DIRECTION('',(0.234229374205,-0.972181361814,0.)); +#258638 = ORIENTED_EDGE('',*,*,#258639,.T.); +#258639 = EDGE_CURVE('',#258632,#258640,#258642,.T.); +#258640 = VERTEX_POINT('',#258641); +#258641 = CARTESIAN_POINT('',(118.428541,-133.862551,-7.5E-02)); +#258642 = LINE('',#258643,#258644); +#258643 = CARTESIAN_POINT('',(118.429982,-132.847919,-7.5E-02)); +#258644 = VECTOR('',#258645,1.); +#258645 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#258646 = ORIENTED_EDGE('',*,*,#258647,.T.); +#258647 = EDGE_CURVE('',#258640,#258648,#258650,.T.); +#258648 = VERTEX_POINT('',#258649); +#258649 = CARTESIAN_POINT('',(118.279982,-133.847919,-7.5E-02)); +#258650 = CIRCLE('',#258651,7.500006711462E-02); +#258651 = AXIS2_PLACEMENT_3D('',#258652,#258653,#258654); +#258652 = CARTESIAN_POINT('',(118.35498206711,-133.8479190671,-7.5E-02) + ); +#258653 = DIRECTION('',(-0.,0.,-1.)); +#258654 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#258655 = ORIENTED_EDGE('',*,*,#258656,.T.); +#258656 = EDGE_CURVE('',#258648,#258657,#258659,.T.); +#258657 = VERTEX_POINT('',#258658); +#258658 = CARTESIAN_POINT('',(118.279982,-133.185986,-7.5E-02)); +#258659 = LINE('',#258660,#258661); +#258660 = CARTESIAN_POINT('',(118.279982,-133.847919,-7.5E-02)); +#258661 = VECTOR('',#258662,1.); +#258662 = DIRECTION('',(0.,1.,0.)); +#258663 = ORIENTED_EDGE('',*,*,#258664,.T.); +#258664 = EDGE_CURVE('',#258657,#258665,#258667,.T.); +#258665 = VERTEX_POINT('',#258666); +#258666 = CARTESIAN_POINT('',(118.082119,-133.60657,-7.5E-02)); +#258667 = LINE('',#258668,#258669); +#258668 = CARTESIAN_POINT('',(118.279982,-133.185986,-7.5E-02)); +#258669 = VECTOR('',#258670,1.); +#258670 = DIRECTION('',(-0.42569331878,-0.904867503199,0.)); +#258671 = ORIENTED_EDGE('',*,*,#258672,.T.); +#258672 = EDGE_CURVE('',#258665,#258673,#258675,.T.); +#258673 = VERTEX_POINT('',#258674); +#258674 = CARTESIAN_POINT('',(117.953685,-133.593921,-7.5E-02)); +#258675 = CIRCLE('',#258676,7.50005556121E-02); +#258676 = AXIS2_PLACEMENT_3D('',#258677,#258678,#258679); +#258677 = CARTESIAN_POINT('',(118.02164865745,-133.562203109,-7.5E-02)); +#258678 = DIRECTION('',(-0.,0.,-1.)); +#258679 = DIRECTION('',(0.806265261009,-0.591554163953,-0.)); +#258680 = ORIENTED_EDGE('',*,*,#258681,.T.); +#258681 = EDGE_CURVE('',#258673,#258682,#258684,.T.); +#258682 = VERTEX_POINT('',#258683); +#258683 = CARTESIAN_POINT('',(117.763316,-133.185986,-7.5E-02)); +#258684 = LINE('',#258685,#258686); +#258685 = CARTESIAN_POINT('',(117.953685,-133.593921,-7.5E-02)); +#258686 = VECTOR('',#258687,1.); +#258687 = DIRECTION('',(-0.42288424924,0.906183707503,0.)); +#258688 = ORIENTED_EDGE('',*,*,#258689,.T.); +#258689 = EDGE_CURVE('',#258682,#258690,#258692,.T.); +#258690 = VERTEX_POINT('',#258691); +#258691 = CARTESIAN_POINT('',(117.761875,-133.862551,-7.5E-02)); +#258692 = LINE('',#258693,#258694); +#258693 = CARTESIAN_POINT('',(117.763316,-133.185986,-7.5E-02)); +#258694 = VECTOR('',#258695,1.); +#258695 = DIRECTION('',(-2.129871825402E-03,-0.99999773182,0.)); +#258696 = ORIENTED_EDGE('',*,*,#258697,.T.); +#258697 = EDGE_CURVE('',#258690,#258698,#258700,.T.); +#258698 = VERTEX_POINT('',#258699); +#258699 = CARTESIAN_POINT('',(117.613316,-133.847919,-7.5E-02)); +#258700 = CIRCLE('',#258701,7.500006711464E-02); +#258701 = AXIS2_PLACEMENT_3D('',#258702,#258703,#258704); +#258702 = CARTESIAN_POINT('',(117.68831606711,-133.8479190671,-7.5E-02) + ); +#258703 = DIRECTION('',(-0.,0.,-1.)); +#258704 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#258705 = ORIENTED_EDGE('',*,*,#258706,.T.); +#258706 = EDGE_CURVE('',#258698,#258707,#258709,.T.); +#258707 = VERTEX_POINT('',#258708); +#258708 = CARTESIAN_POINT('',(117.614757,-132.833287,-7.5E-02)); +#258709 = LINE('',#258710,#258711); +#258710 = CARTESIAN_POINT('',(117.613316,-133.847919,-7.5E-02)); +#258711 = VECTOR('',#258712,1.); +#258712 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#258713 = ORIENTED_EDGE('',*,*,#258714,.T.); +#258714 = EDGE_CURVE('',#258707,#258715,#258717,.T.); +#258715 = VERTEX_POINT('',#258716); +#258716 = CARTESIAN_POINT('',(117.75628,-132.816203,-7.5E-02)); +#258717 = CIRCLE('',#258718,7.500008955867E-02); +#258718 = AXIS2_PLACEMENT_3D('',#258719,#258720,#258721); +#258719 = CARTESIAN_POINT('',(117.68831595197,-132.8479189519,-7.5E-02) + ); +#258720 = DIRECTION('',(0.,0.,-1.)); +#258721 = DIRECTION('',(-0.980784855129,0.195092460003,0.)); +#258722 = ORIENTED_EDGE('',*,*,#258723,.T.); +#258723 = EDGE_CURVE('',#258715,#258724,#258726,.T.); +#258724 = VERTEX_POINT('',#258725); +#258725 = CARTESIAN_POINT('',(118.021648,-133.38485,-7.5E-02)); +#258726 = LINE('',#258727,#258728); +#258727 = CARTESIAN_POINT('',(117.75628,-132.816203,-7.5E-02)); +#258728 = VECTOR('',#258729,1.); +#258729 = DIRECTION('',(0.422884680174,-0.906183506402,0.)); +#258730 = ORIENTED_EDGE('',*,*,#258731,.T.); +#258731 = EDGE_CURVE('',#258724,#258597,#258732,.T.); +#258732 = LINE('',#258733,#258734); +#258733 = CARTESIAN_POINT('',(118.021648,-133.38485,-7.5E-02)); +#258734 = VECTOR('',#258735,1.); +#258735 = DIRECTION('',(0.424919689643,0.905231051916,0.)); +#258736 = PLANE('',#258737); +#258737 = AXIS2_PLACEMENT_3D('',#258738,#258739,#258740); +#258738 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258739 = DIRECTION('',(-0.,-0.,-1.)); +#258740 = DIRECTION('',(-1.,0.,0.)); +#258741 = SHELL_BASED_SURFACE_MODEL('',(#258742)); +#258742 = OPEN_SHELL('',(#258743)); +#258743 = ADVANCED_FACE('',(#258744),#259277,.T.); +#258744 = FACE_BOUND('',#258745,.T.); +#258745 = EDGE_LOOP('',(#258746,#258757,#258765,#258773,#258781,#258789, + #258797,#258805,#258814,#258822,#258830,#258838,#258847,#258855, + #258864,#258872,#258880,#258888,#258897,#258905,#258913,#258921, + #258929,#258937,#258945,#258953,#258961,#258969,#258977,#258985, + #258993,#259001,#259009,#259017,#259025,#259033,#259041,#259049, + #259057,#259065,#259073,#259081,#259089,#259097,#259105,#259113, + #259121,#259129,#259137,#259145,#259154,#259162,#259171,#259179, + #259187,#259196,#259204,#259213,#259221,#259229,#259237,#259246, + #259254,#259263,#259271)); +#258746 = ORIENTED_EDGE('',*,*,#258747,.T.); +#258747 = EDGE_CURVE('',#258748,#258750,#258752,.T.); +#258748 = VERTEX_POINT('',#258749); +#258749 = CARTESIAN_POINT('',(87.12165,-78.6531,-7.5E-02)); +#258750 = VERTEX_POINT('',#258751); +#258751 = CARTESIAN_POINT('',(87.18165,-78.5931,-7.5E-02)); +#258752 = CIRCLE('',#258753,5.999932016256E-02); +#258753 = AXIS2_PLACEMENT_3D('',#258754,#258755,#258756); +#258754 = CARTESIAN_POINT('',(87.181649320159,-78.65309932015,-7.5E-02) + ); +#258755 = DIRECTION('',(0.,0.,-1.)); +#258756 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#258757 = ORIENTED_EDGE('',*,*,#258758,.T.); +#258758 = EDGE_CURVE('',#258750,#258759,#258761,.T.); +#258759 = VERTEX_POINT('',#258760); +#258760 = CARTESIAN_POINT('',(96.50572,-78.5931,-7.5E-02)); +#258761 = LINE('',#258762,#258763); +#258762 = CARTESIAN_POINT('',(87.18165,-78.5931,-7.5E-02)); +#258763 = VECTOR('',#258764,1.); +#258764 = DIRECTION('',(1.,0.,0.)); +#258765 = ORIENTED_EDGE('',*,*,#258766,.T.); +#258766 = EDGE_CURVE('',#258759,#258767,#258769,.T.); +#258767 = VERTEX_POINT('',#258768); +#258768 = CARTESIAN_POINT('',(96.485532,-78.641836,-7.5E-02)); +#258769 = LINE('',#258770,#258771); +#258770 = CARTESIAN_POINT('',(96.50572,-78.5931,-7.5E-02)); +#258771 = VECTOR('',#258772,1.); +#258772 = DIRECTION('',(-0.382697797805,-0.92387358202,0.)); +#258773 = ORIENTED_EDGE('',*,*,#258774,.T.); +#258774 = EDGE_CURVE('',#258767,#258775,#258777,.T.); +#258775 = VERTEX_POINT('',#258776); +#258776 = CARTESIAN_POINT('',(96.485532,-78.700364,-7.5E-02)); +#258777 = LINE('',#258778,#258779); +#258778 = CARTESIAN_POINT('',(96.485532,-78.641836,-7.5E-02)); +#258779 = VECTOR('',#258780,1.); +#258780 = DIRECTION('',(0.,-1.,0.)); +#258781 = ORIENTED_EDGE('',*,*,#258782,.T.); +#258782 = EDGE_CURVE('',#258775,#258783,#258785,.T.); +#258783 = VERTEX_POINT('',#258784); +#258784 = CARTESIAN_POINT('',(96.490808,-78.7131,-7.5E-02)); +#258785 = LINE('',#258786,#258787); +#258786 = CARTESIAN_POINT('',(96.485532,-78.700364,-7.5E-02)); +#258787 = VECTOR('',#258788,1.); +#258788 = DIRECTION('',(0.382719100265,-0.923864757577,0.)); +#258789 = ORIENTED_EDGE('',*,*,#258790,.T.); +#258790 = EDGE_CURVE('',#258783,#258791,#258793,.T.); +#258791 = VERTEX_POINT('',#258792); +#258792 = CARTESIAN_POINT('',(87.24165,-78.7131,-7.5E-02)); +#258793 = LINE('',#258794,#258795); +#258794 = CARTESIAN_POINT('',(96.490808,-78.7131,-7.5E-02)); +#258795 = VECTOR('',#258796,1.); +#258796 = DIRECTION('',(-1.,0.,0.)); +#258797 = ORIENTED_EDGE('',*,*,#258798,.T.); +#258798 = EDGE_CURVE('',#258791,#258799,#258801,.T.); +#258799 = VERTEX_POINT('',#258800); +#258800 = CARTESIAN_POINT('',(87.24165,-88.1831,-7.5E-02)); +#258801 = LINE('',#258802,#258803); +#258802 = CARTESIAN_POINT('',(87.24165,-78.7131,-7.5E-02)); +#258803 = VECTOR('',#258804,1.); +#258804 = DIRECTION('',(0.,-1.,0.)); +#258805 = ORIENTED_EDGE('',*,*,#258806,.T.); +#258806 = EDGE_CURVE('',#258799,#258807,#258809,.T.); +#258807 = VERTEX_POINT('',#258808); +#258808 = CARTESIAN_POINT('',(87.18165,-88.2431,-7.5E-02)); +#258809 = CIRCLE('',#258810,5.999932016262E-02); +#258810 = AXIS2_PLACEMENT_3D('',#258811,#258812,#258813); +#258811 = CARTESIAN_POINT('',(87.181650679841,-88.18310067984,-7.5E-02) + ); +#258812 = DIRECTION('',(0.,0.,-1.)); +#258813 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#258814 = ORIENTED_EDGE('',*,*,#258815,.T.); +#258815 = EDGE_CURVE('',#258807,#258816,#258818,.T.); +#258816 = VERTEX_POINT('',#258817); +#258817 = CARTESIAN_POINT('',(80.89165,-88.2431,-7.5E-02)); +#258818 = LINE('',#258819,#258820); +#258819 = CARTESIAN_POINT('',(87.18165,-88.2431,-7.5E-02)); +#258820 = VECTOR('',#258821,1.); +#258821 = DIRECTION('',(-1.,0.,0.)); +#258822 = ORIENTED_EDGE('',*,*,#258823,.T.); +#258823 = EDGE_CURVE('',#258816,#258824,#258826,.T.); +#258824 = VERTEX_POINT('',#258825); +#258825 = CARTESIAN_POINT('',(80.89165,-99.8031,-7.5E-02)); +#258826 = LINE('',#258827,#258828); +#258827 = CARTESIAN_POINT('',(80.89165,-88.2431,-7.5E-02)); +#258828 = VECTOR('',#258829,1.); +#258829 = DIRECTION('',(0.,-1.,0.)); +#258830 = ORIENTED_EDGE('',*,*,#258831,.T.); +#258831 = EDGE_CURVE('',#258824,#258832,#258834,.T.); +#258832 = VERTEX_POINT('',#258833); +#258833 = CARTESIAN_POINT('',(87.18165,-99.8031,-7.5E-02)); +#258834 = LINE('',#258835,#258836); +#258835 = CARTESIAN_POINT('',(80.89165,-99.8031,-7.5E-02)); +#258836 = VECTOR('',#258837,1.); +#258837 = DIRECTION('',(1.,0.,0.)); +#258838 = ORIENTED_EDGE('',*,*,#258839,.T.); +#258839 = EDGE_CURVE('',#258832,#258840,#258842,.T.); +#258840 = VERTEX_POINT('',#258841); +#258841 = CARTESIAN_POINT('',(87.24165,-99.8631,-7.5E-02)); +#258842 = CIRCLE('',#258843,5.999932016261E-02); +#258843 = AXIS2_PLACEMENT_3D('',#258844,#258845,#258846); +#258844 = CARTESIAN_POINT('',(87.181650679841,-99.86309932015,-7.5E-02) + ); +#258845 = DIRECTION('',(0.,0.,-1.)); +#258846 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#258847 = ORIENTED_EDGE('',*,*,#258848,.T.); +#258848 = EDGE_CURVE('',#258840,#258849,#258851,.T.); +#258849 = VERTEX_POINT('',#258850); +#258850 = CARTESIAN_POINT('',(87.24165,-119.9331,-7.5E-02)); +#258851 = LINE('',#258852,#258853); +#258852 = CARTESIAN_POINT('',(87.24165,-99.8631,-7.5E-02)); +#258853 = VECTOR('',#258854,1.); +#258854 = DIRECTION('',(0.,-1.,0.)); +#258855 = ORIENTED_EDGE('',*,*,#258856,.T.); +#258856 = EDGE_CURVE('',#258849,#258857,#258859,.T.); +#258857 = VERTEX_POINT('',#258858); +#258858 = CARTESIAN_POINT('',(87.18165,-119.9931,-7.5E-02)); +#258859 = CIRCLE('',#258860,5.999932016262E-02); +#258860 = AXIS2_PLACEMENT_3D('',#258861,#258862,#258863); +#258861 = CARTESIAN_POINT('',(87.181650679841,-119.9331006798,-7.5E-02) + ); +#258862 = DIRECTION('',(0.,0.,-1.)); +#258863 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#258864 = ORIENTED_EDGE('',*,*,#258865,.T.); +#258865 = EDGE_CURVE('',#258857,#258866,#258868,.T.); +#258866 = VERTEX_POINT('',#258867); +#258867 = CARTESIAN_POINT('',(85.34165,-119.9931,-7.5E-02)); +#258868 = LINE('',#258869,#258870); +#258869 = CARTESIAN_POINT('',(87.18165,-119.9931,-7.5E-02)); +#258870 = VECTOR('',#258871,1.); +#258871 = DIRECTION('',(-1.,0.,0.)); +#258872 = ORIENTED_EDGE('',*,*,#258873,.T.); +#258873 = EDGE_CURVE('',#258866,#258874,#258876,.T.); +#258874 = VERTEX_POINT('',#258875); +#258875 = CARTESIAN_POINT('',(85.34165,-129.0131,-7.5E-02)); +#258876 = LINE('',#258877,#258878); +#258877 = CARTESIAN_POINT('',(85.34165,-119.9931,-7.5E-02)); +#258878 = VECTOR('',#258879,1.); +#258879 = DIRECTION('',(0.,-1.,0.)); +#258880 = ORIENTED_EDGE('',*,*,#258881,.T.); +#258881 = EDGE_CURVE('',#258874,#258882,#258884,.T.); +#258882 = VERTEX_POINT('',#258883); +#258883 = CARTESIAN_POINT('',(87.18165,-129.0131,-7.5E-02)); +#258884 = LINE('',#258885,#258886); +#258885 = CARTESIAN_POINT('',(85.34165,-129.0131,-7.5E-02)); +#258886 = VECTOR('',#258887,1.); +#258887 = DIRECTION('',(1.,0.,0.)); +#258888 = ORIENTED_EDGE('',*,*,#258889,.T.); +#258889 = EDGE_CURVE('',#258882,#258890,#258892,.T.); +#258890 = VERTEX_POINT('',#258891); +#258891 = CARTESIAN_POINT('',(87.24165,-129.0731,-7.5E-02)); +#258892 = CIRCLE('',#258893,5.999932016256E-02); +#258893 = AXIS2_PLACEMENT_3D('',#258894,#258895,#258896); +#258894 = CARTESIAN_POINT('',(87.181650679841,-129.0730993201,-7.5E-02) + ); +#258895 = DIRECTION('',(0.,0.,-1.)); +#258896 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#258897 = ORIENTED_EDGE('',*,*,#258898,.T.); +#258898 = EDGE_CURVE('',#258890,#258899,#258901,.T.); +#258899 = VERTEX_POINT('',#258900); +#258900 = CARTESIAN_POINT('',(87.24165,-132.1931,-7.5E-02)); +#258901 = LINE('',#258902,#258903); +#258902 = CARTESIAN_POINT('',(87.24165,-129.0731,-7.5E-02)); +#258903 = VECTOR('',#258904,1.); +#258904 = DIRECTION('',(0.,-1.,0.)); +#258905 = ORIENTED_EDGE('',*,*,#258906,.T.); +#258906 = EDGE_CURVE('',#258899,#258907,#258909,.T.); +#258907 = VERTEX_POINT('',#258908); +#258908 = CARTESIAN_POINT('',(153.42165,-132.1931,-7.5E-02)); +#258909 = LINE('',#258910,#258911); +#258910 = CARTESIAN_POINT('',(87.24165,-132.1931,-7.5E-02)); +#258911 = VECTOR('',#258912,1.); +#258912 = DIRECTION('',(1.,0.,0.)); +#258913 = ORIENTED_EDGE('',*,*,#258914,.T.); +#258914 = EDGE_CURVE('',#258907,#258915,#258917,.T.); +#258915 = VERTEX_POINT('',#258916); +#258916 = CARTESIAN_POINT('',(153.42165,-129.5831,-7.5E-02)); +#258917 = LINE('',#258918,#258919); +#258918 = CARTESIAN_POINT('',(153.42165,-132.1931,-7.5E-02)); +#258919 = VECTOR('',#258920,1.); +#258920 = DIRECTION('',(0.,1.,0.)); +#258921 = ORIENTED_EDGE('',*,*,#258922,.T.); +#258922 = EDGE_CURVE('',#258915,#258923,#258925,.T.); +#258923 = VERTEX_POINT('',#258924); +#258924 = CARTESIAN_POINT('',(153.426217,-129.560139,-7.5E-02)); +#258925 = LINE('',#258926,#258927); +#258926 = CARTESIAN_POINT('',(153.42165,-129.5831,-7.5E-02)); +#258927 = VECTOR('',#258928,1.); +#258928 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#258929 = ORIENTED_EDGE('',*,*,#258930,.T.); +#258930 = EDGE_CURVE('',#258923,#258931,#258933,.T.); +#258931 = VERTEX_POINT('',#258932); +#258932 = CARTESIAN_POINT('',(153.439224,-129.540674,-7.5E-02)); +#258933 = LINE('',#258934,#258935); +#258934 = CARTESIAN_POINT('',(153.426217,-129.560139,-7.5E-02)); +#258935 = VECTOR('',#258936,1.); +#258936 = DIRECTION('',(0.555596893534,0.831451797698,0.)); +#258937 = ORIENTED_EDGE('',*,*,#258938,.T.); +#258938 = EDGE_CURVE('',#258931,#258939,#258941,.T.); +#258939 = VERTEX_POINT('',#258940); +#258940 = CARTESIAN_POINT('',(155.96165,-127.018247,-7.5E-02)); +#258941 = LINE('',#258942,#258943); +#258942 = CARTESIAN_POINT('',(153.439224,-129.540674,-7.5E-02)); +#258943 = VECTOR('',#258944,1.); +#258944 = DIRECTION('',(0.707106641023,0.707106921351,0.)); +#258945 = ORIENTED_EDGE('',*,*,#258946,.T.); +#258946 = EDGE_CURVE('',#258939,#258947,#258949,.T.); +#258947 = VERTEX_POINT('',#258948); +#258948 = CARTESIAN_POINT('',(155.96165,-94.297952,-7.5E-02)); +#258949 = LINE('',#258950,#258951); +#258950 = CARTESIAN_POINT('',(155.96165,-127.018247,-7.5E-02)); +#258951 = VECTOR('',#258952,1.); +#258952 = DIRECTION('',(0.,1.,0.)); +#258953 = ORIENTED_EDGE('',*,*,#258954,.T.); +#258954 = EDGE_CURVE('',#258947,#258955,#258957,.T.); +#258955 = VERTEX_POINT('',#258956); +#258956 = CARTESIAN_POINT('',(153.439224,-91.775526,-7.5E-02)); +#258957 = LINE('',#258958,#258959); +#258958 = CARTESIAN_POINT('',(155.96165,-94.297952,-7.5E-02)); +#258959 = VECTOR('',#258960,1.); +#258960 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258961 = ORIENTED_EDGE('',*,*,#258962,.T.); +#258962 = EDGE_CURVE('',#258955,#258963,#258965,.T.); +#258963 = VERTEX_POINT('',#258964); +#258964 = CARTESIAN_POINT('',(153.426217,-91.756061,-7.5E-02)); +#258965 = LINE('',#258966,#258967); +#258966 = CARTESIAN_POINT('',(153.439224,-91.775526,-7.5E-02)); +#258967 = VECTOR('',#258968,1.); +#258968 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#258969 = ORIENTED_EDGE('',*,*,#258970,.T.); +#258970 = EDGE_CURVE('',#258963,#258971,#258973,.T.); +#258971 = VERTEX_POINT('',#258972); +#258972 = CARTESIAN_POINT('',(153.42165,-91.7331,-7.5E-02)); +#258973 = LINE('',#258974,#258975); +#258974 = CARTESIAN_POINT('',(153.426217,-91.756061,-7.5E-02)); +#258975 = VECTOR('',#258976,1.); +#258976 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#258977 = ORIENTED_EDGE('',*,*,#258978,.T.); +#258978 = EDGE_CURVE('',#258971,#258979,#258981,.T.); +#258979 = VERTEX_POINT('',#258980); +#258980 = CARTESIAN_POINT('',(153.42165,-80.327952,-7.5E-02)); +#258981 = LINE('',#258982,#258983); +#258982 = CARTESIAN_POINT('',(153.42165,-91.7331,-7.5E-02)); +#258983 = VECTOR('',#258984,1.); +#258984 = DIRECTION('',(0.,1.,0.)); +#258985 = ORIENTED_EDGE('',*,*,#258986,.T.); +#258986 = EDGE_CURVE('',#258979,#258987,#258989,.T.); +#258987 = VERTEX_POINT('',#258988); +#258988 = CARTESIAN_POINT('',(151.806798,-78.7131,-7.5E-02)); +#258989 = LINE('',#258990,#258991); +#258990 = CARTESIAN_POINT('',(153.42165,-80.327952,-7.5E-02)); +#258991 = VECTOR('',#258992,1.); +#258992 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258993 = ORIENTED_EDGE('',*,*,#258994,.T.); +#258994 = EDGE_CURVE('',#258987,#258995,#258997,.T.); +#258995 = VERTEX_POINT('',#258996); +#258996 = CARTESIAN_POINT('',(96.774492,-78.7131,-7.5E-02)); +#258997 = LINE('',#258998,#258999); +#258998 = CARTESIAN_POINT('',(151.806798,-78.7131,-7.5E-02)); +#258999 = VECTOR('',#259000,1.); +#259000 = DIRECTION('',(-1.,0.,0.)); +#259001 = ORIENTED_EDGE('',*,*,#259002,.T.); +#259002 = EDGE_CURVE('',#258995,#259003,#259005,.T.); +#259003 = VERTEX_POINT('',#259004); +#259004 = CARTESIAN_POINT('',(96.779768,-78.700364,-7.5E-02)); +#259005 = LINE('',#259006,#259007); +#259006 = CARTESIAN_POINT('',(96.774492,-78.7131,-7.5E-02)); +#259007 = VECTOR('',#259008,1.); +#259008 = DIRECTION('',(0.382719100265,0.923864757577,0.)); +#259009 = ORIENTED_EDGE('',*,*,#259010,.T.); +#259010 = EDGE_CURVE('',#259003,#259011,#259013,.T.); +#259011 = VERTEX_POINT('',#259012); +#259012 = CARTESIAN_POINT('',(96.779768,-78.641836,-7.5E-02)); +#259013 = LINE('',#259014,#259015); +#259014 = CARTESIAN_POINT('',(96.779768,-78.700364,-7.5E-02)); +#259015 = VECTOR('',#259016,1.); +#259016 = DIRECTION('',(0.,1.,0.)); +#259017 = ORIENTED_EDGE('',*,*,#259018,.T.); +#259018 = EDGE_CURVE('',#259011,#259019,#259021,.T.); +#259019 = VERTEX_POINT('',#259020); +#259020 = CARTESIAN_POINT('',(96.75958,-78.5931,-7.5E-02)); +#259021 = LINE('',#259022,#259023); +#259022 = CARTESIAN_POINT('',(96.779768,-78.641836,-7.5E-02)); +#259023 = VECTOR('',#259024,1.); +#259024 = DIRECTION('',(-0.382697797805,0.92387358202,0.)); +#259025 = ORIENTED_EDGE('',*,*,#259026,.T.); +#259026 = EDGE_CURVE('',#259019,#259027,#259029,.T.); +#259027 = VERTEX_POINT('',#259028); +#259028 = CARTESIAN_POINT('',(151.83165,-78.5931,-7.5E-02)); +#259029 = LINE('',#259030,#259031); +#259030 = CARTESIAN_POINT('',(96.75958,-78.5931,-7.5E-02)); +#259031 = VECTOR('',#259032,1.); +#259032 = DIRECTION('',(1.,0.,0.)); +#259033 = ORIENTED_EDGE('',*,*,#259034,.T.); +#259034 = EDGE_CURVE('',#259027,#259035,#259037,.T.); +#259035 = VERTEX_POINT('',#259036); +#259036 = CARTESIAN_POINT('',(151.854611,-78.597667,-7.5E-02)); +#259037 = LINE('',#259038,#259039); +#259038 = CARTESIAN_POINT('',(151.83165,-78.5931,-7.5E-02)); +#259039 = VECTOR('',#259040,1.); +#259040 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#259041 = ORIENTED_EDGE('',*,*,#259042,.T.); +#259042 = EDGE_CURVE('',#259035,#259043,#259045,.T.); +#259043 = VERTEX_POINT('',#259044); +#259044 = CARTESIAN_POINT('',(151.874076,-78.610674,-7.5E-02)); +#259045 = LINE('',#259046,#259047); +#259046 = CARTESIAN_POINT('',(151.854611,-78.597667,-7.5E-02)); +#259047 = VECTOR('',#259048,1.); +#259048 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#259049 = ORIENTED_EDGE('',*,*,#259050,.T.); +#259050 = EDGE_CURVE('',#259043,#259051,#259053,.T.); +#259051 = VERTEX_POINT('',#259052); +#259052 = CARTESIAN_POINT('',(153.524076,-80.260673,-7.5E-02)); +#259053 = LINE('',#259054,#259055); +#259054 = CARTESIAN_POINT('',(151.874076,-78.610674,-7.5E-02)); +#259055 = VECTOR('',#259056,1.); +#259056 = DIRECTION('',(0.707106995461,-0.707106566912,0.)); +#259057 = ORIENTED_EDGE('',*,*,#259058,.T.); +#259058 = EDGE_CURVE('',#259051,#259059,#259061,.T.); +#259059 = VERTEX_POINT('',#259060); +#259060 = CARTESIAN_POINT('',(153.537083,-80.280139,-7.5E-02)); +#259061 = LINE('',#259062,#259063); +#259062 = CARTESIAN_POINT('',(153.524076,-80.260673,-7.5E-02)); +#259063 = VECTOR('',#259064,1.); +#259064 = DIRECTION('',(0.555577161695,-0.831464982668,0.)); +#259065 = ORIENTED_EDGE('',*,*,#259066,.T.); +#259066 = EDGE_CURVE('',#259059,#259067,#259069,.T.); +#259067 = VERTEX_POINT('',#259068); +#259068 = CARTESIAN_POINT('',(153.54165,-80.3031,-7.5E-02)); +#259069 = LINE('',#259070,#259071); +#259070 = CARTESIAN_POINT('',(153.537083,-80.280139,-7.5E-02)); +#259071 = VECTOR('',#259072,1.); +#259072 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#259073 = ORIENTED_EDGE('',*,*,#259074,.T.); +#259074 = EDGE_CURVE('',#259067,#259075,#259077,.T.); +#259075 = VERTEX_POINT('',#259076); +#259076 = CARTESIAN_POINT('',(153.54165,-91.708247,-7.5E-02)); +#259077 = LINE('',#259078,#259079); +#259078 = CARTESIAN_POINT('',(153.54165,-80.3031,-7.5E-02)); +#259079 = VECTOR('',#259080,1.); +#259080 = DIRECTION('',(0.,-1.,0.)); +#259081 = ORIENTED_EDGE('',*,*,#259082,.T.); +#259082 = EDGE_CURVE('',#259075,#259083,#259085,.T.); +#259083 = VERTEX_POINT('',#259084); +#259084 = CARTESIAN_POINT('',(156.064076,-94.230673,-7.5E-02)); +#259085 = LINE('',#259086,#259087); +#259086 = CARTESIAN_POINT('',(153.54165,-91.708247,-7.5E-02)); +#259087 = VECTOR('',#259088,1.); +#259088 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259089 = ORIENTED_EDGE('',*,*,#259090,.T.); +#259090 = EDGE_CURVE('',#259083,#259091,#259093,.T.); +#259091 = VERTEX_POINT('',#259092); +#259092 = CARTESIAN_POINT('',(156.077083,-94.250139,-7.5E-02)); +#259093 = LINE('',#259094,#259095); +#259094 = CARTESIAN_POINT('',(156.064076,-94.230673,-7.5E-02)); +#259095 = VECTOR('',#259096,1.); +#259096 = DIRECTION('',(0.555577161695,-0.831464982668,0.)); +#259097 = ORIENTED_EDGE('',*,*,#259098,.T.); +#259098 = EDGE_CURVE('',#259091,#259099,#259101,.T.); +#259099 = VERTEX_POINT('',#259100); +#259100 = CARTESIAN_POINT('',(156.08165,-94.2731,-7.5E-02)); +#259101 = LINE('',#259102,#259103); +#259102 = CARTESIAN_POINT('',(156.077083,-94.250139,-7.5E-02)); +#259103 = VECTOR('',#259104,1.); +#259104 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#259105 = ORIENTED_EDGE('',*,*,#259106,.T.); +#259106 = EDGE_CURVE('',#259099,#259107,#259109,.T.); +#259107 = VERTEX_POINT('',#259108); +#259108 = CARTESIAN_POINT('',(156.08165,-127.0431,-7.5E-02)); +#259109 = LINE('',#259110,#259111); +#259110 = CARTESIAN_POINT('',(156.08165,-94.2731,-7.5E-02)); +#259111 = VECTOR('',#259112,1.); +#259112 = DIRECTION('',(0.,-1.,0.)); +#259113 = ORIENTED_EDGE('',*,*,#259114,.T.); +#259114 = EDGE_CURVE('',#259107,#259115,#259117,.T.); +#259115 = VERTEX_POINT('',#259116); +#259116 = CARTESIAN_POINT('',(156.077083,-127.066061,-7.5E-02)); +#259117 = LINE('',#259118,#259119); +#259118 = CARTESIAN_POINT('',(156.08165,-127.0431,-7.5E-02)); +#259119 = VECTOR('',#259120,1.); +#259120 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#259121 = ORIENTED_EDGE('',*,*,#259122,.T.); +#259122 = EDGE_CURVE('',#259115,#259123,#259125,.T.); +#259123 = VERTEX_POINT('',#259124); +#259124 = CARTESIAN_POINT('',(156.064076,-127.085527,-7.5E-02)); +#259125 = LINE('',#259126,#259127); +#259126 = CARTESIAN_POINT('',(156.077083,-127.066061,-7.5E-02)); +#259127 = VECTOR('',#259128,1.); +#259128 = DIRECTION('',(-0.555577161695,-0.831464982668,0.)); +#259129 = ORIENTED_EDGE('',*,*,#259130,.T.); +#259130 = EDGE_CURVE('',#259123,#259131,#259133,.T.); +#259131 = VERTEX_POINT('',#259132); +#259132 = CARTESIAN_POINT('',(153.54165,-129.607952,-7.5E-02)); +#259133 = LINE('',#259134,#259135); +#259134 = CARTESIAN_POINT('',(156.064076,-127.085527,-7.5E-02)); +#259135 = VECTOR('',#259136,1.); +#259136 = DIRECTION('',(-0.707106921351,-0.707106641022,0.)); +#259137 = ORIENTED_EDGE('',*,*,#259138,.T.); +#259138 = EDGE_CURVE('',#259131,#259139,#259141,.T.); +#259139 = VERTEX_POINT('',#259140); +#259140 = CARTESIAN_POINT('',(153.54165,-132.2531,-7.5E-02)); +#259141 = LINE('',#259142,#259143); +#259142 = CARTESIAN_POINT('',(153.54165,-129.607952,-7.5E-02)); +#259143 = VECTOR('',#259144,1.); +#259144 = DIRECTION('',(0.,-1.,0.)); +#259145 = ORIENTED_EDGE('',*,*,#259146,.T.); +#259146 = EDGE_CURVE('',#259139,#259147,#259149,.T.); +#259147 = VERTEX_POINT('',#259148); +#259148 = CARTESIAN_POINT('',(153.48165,-132.3131,-7.5E-02)); +#259149 = CIRCLE('',#259150,5.999932016262E-02); +#259150 = AXIS2_PLACEMENT_3D('',#259151,#259152,#259153); +#259151 = CARTESIAN_POINT('',(153.48165067984,-132.2531006798,-7.5E-02) + ); +#259152 = DIRECTION('',(0.,0.,-1.)); +#259153 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#259154 = ORIENTED_EDGE('',*,*,#259155,.T.); +#259155 = EDGE_CURVE('',#259147,#259156,#259158,.T.); +#259156 = VERTEX_POINT('',#259157); +#259157 = CARTESIAN_POINT('',(87.18165,-132.3131,-7.5E-02)); +#259158 = LINE('',#259159,#259160); +#259159 = CARTESIAN_POINT('',(153.48165,-132.3131,-7.5E-02)); +#259160 = VECTOR('',#259161,1.); +#259161 = DIRECTION('',(-1.,0.,0.)); +#259162 = ORIENTED_EDGE('',*,*,#259163,.T.); +#259163 = EDGE_CURVE('',#259156,#259164,#259166,.T.); +#259164 = VERTEX_POINT('',#259165); +#259165 = CARTESIAN_POINT('',(87.12165,-132.2531,-7.5E-02)); +#259166 = CIRCLE('',#259167,5.999932016251E-02); +#259167 = AXIS2_PLACEMENT_3D('',#259168,#259169,#259170); +#259168 = CARTESIAN_POINT('',(87.181649320159,-132.2531006798,-7.5E-02) + ); +#259169 = DIRECTION('',(0.,0.,-1.)); +#259170 = DIRECTION('',(1.133081730569E-05,-0.999999999936,0.)); +#259171 = ORIENTED_EDGE('',*,*,#259172,.T.); +#259172 = EDGE_CURVE('',#259164,#259173,#259175,.T.); +#259173 = VERTEX_POINT('',#259174); +#259174 = CARTESIAN_POINT('',(87.12165,-129.1331,-7.5E-02)); +#259175 = LINE('',#259176,#259177); +#259176 = CARTESIAN_POINT('',(87.12165,-132.2531,-7.5E-02)); +#259177 = VECTOR('',#259178,1.); +#259178 = DIRECTION('',(0.,1.,0.)); +#259179 = ORIENTED_EDGE('',*,*,#259180,.T.); +#259180 = EDGE_CURVE('',#259173,#259181,#259183,.T.); +#259181 = VERTEX_POINT('',#259182); +#259182 = CARTESIAN_POINT('',(85.28165,-129.1331,-7.5E-02)); +#259183 = LINE('',#259184,#259185); +#259184 = CARTESIAN_POINT('',(87.12165,-129.1331,-7.5E-02)); +#259185 = VECTOR('',#259186,1.); +#259186 = DIRECTION('',(-1.,0.,0.)); +#259187 = ORIENTED_EDGE('',*,*,#259188,.T.); +#259188 = EDGE_CURVE('',#259181,#259189,#259191,.T.); +#259189 = VERTEX_POINT('',#259190); +#259190 = CARTESIAN_POINT('',(85.22165,-129.0731,-7.5E-02)); +#259191 = CIRCLE('',#259192,5.999932016265E-02); +#259192 = AXIS2_PLACEMENT_3D('',#259193,#259194,#259195); +#259193 = CARTESIAN_POINT('',(85.281649320159,-129.0731006798,-7.5E-02) + ); +#259194 = DIRECTION('',(0.,0.,-1.)); +#259195 = DIRECTION('',(1.133081517401E-05,-0.999999999936,0.)); +#259196 = ORIENTED_EDGE('',*,*,#259197,.T.); +#259197 = EDGE_CURVE('',#259189,#259198,#259200,.T.); +#259198 = VERTEX_POINT('',#259199); +#259199 = CARTESIAN_POINT('',(85.22165,-119.9331,-7.5E-02)); +#259200 = LINE('',#259201,#259202); +#259201 = CARTESIAN_POINT('',(85.22165,-129.0731,-7.5E-02)); +#259202 = VECTOR('',#259203,1.); +#259203 = DIRECTION('',(0.,1.,0.)); +#259204 = ORIENTED_EDGE('',*,*,#259205,.T.); +#259205 = EDGE_CURVE('',#259198,#259206,#259208,.T.); +#259206 = VERTEX_POINT('',#259207); +#259207 = CARTESIAN_POINT('',(85.28165,-119.8731,-7.5E-02)); +#259208 = CIRCLE('',#259209,5.999932016263E-02); +#259209 = AXIS2_PLACEMENT_3D('',#259210,#259211,#259212); +#259210 = CARTESIAN_POINT('',(85.281649320159,-119.9330993201,-7.5E-02) + ); +#259211 = DIRECTION('',(0.,0.,-1.)); +#259212 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#259213 = ORIENTED_EDGE('',*,*,#259214,.T.); +#259214 = EDGE_CURVE('',#259206,#259215,#259217,.T.); +#259215 = VERTEX_POINT('',#259216); +#259216 = CARTESIAN_POINT('',(87.12165,-119.8731,-7.5E-02)); +#259217 = LINE('',#259218,#259219); +#259218 = CARTESIAN_POINT('',(85.28165,-119.8731,-7.5E-02)); +#259219 = VECTOR('',#259220,1.); +#259220 = DIRECTION('',(1.,0.,0.)); +#259221 = ORIENTED_EDGE('',*,*,#259222,.T.); +#259222 = EDGE_CURVE('',#259215,#259223,#259225,.T.); +#259223 = VERTEX_POINT('',#259224); +#259224 = CARTESIAN_POINT('',(87.12165,-99.9231,-7.5E-02)); +#259225 = LINE('',#259226,#259227); +#259226 = CARTESIAN_POINT('',(87.12165,-119.8731,-7.5E-02)); +#259227 = VECTOR('',#259228,1.); +#259228 = DIRECTION('',(0.,1.,0.)); +#259229 = ORIENTED_EDGE('',*,*,#259230,.T.); +#259230 = EDGE_CURVE('',#259223,#259231,#259233,.T.); +#259231 = VERTEX_POINT('',#259232); +#259232 = CARTESIAN_POINT('',(80.83165,-99.9231,-7.5E-02)); +#259233 = LINE('',#259234,#259235); +#259234 = CARTESIAN_POINT('',(87.12165,-99.9231,-7.5E-02)); +#259235 = VECTOR('',#259236,1.); +#259236 = DIRECTION('',(-1.,0.,0.)); +#259237 = ORIENTED_EDGE('',*,*,#259238,.T.); +#259238 = EDGE_CURVE('',#259231,#259239,#259241,.T.); +#259239 = VERTEX_POINT('',#259240); +#259240 = CARTESIAN_POINT('',(80.77165,-99.8631,-7.5E-02)); +#259241 = CIRCLE('',#259242,5.999932016263E-02); +#259242 = AXIS2_PLACEMENT_3D('',#259243,#259244,#259245); +#259243 = CARTESIAN_POINT('',(80.831649320159,-99.86310067984,-7.5E-02) + ); +#259244 = DIRECTION('',(0.,0.,-1.)); +#259245 = DIRECTION('',(1.133081541087E-05,-0.999999999936,0.)); +#259246 = ORIENTED_EDGE('',*,*,#259247,.T.); +#259247 = EDGE_CURVE('',#259239,#259248,#259250,.T.); +#259248 = VERTEX_POINT('',#259249); +#259249 = CARTESIAN_POINT('',(80.77165,-88.1831,-7.5E-02)); +#259250 = LINE('',#259251,#259252); +#259251 = CARTESIAN_POINT('',(80.77165,-99.8631,-7.5E-02)); +#259252 = VECTOR('',#259253,1.); +#259253 = DIRECTION('',(0.,1.,0.)); +#259254 = ORIENTED_EDGE('',*,*,#259255,.T.); +#259255 = EDGE_CURVE('',#259248,#259256,#259258,.T.); +#259256 = VERTEX_POINT('',#259257); +#259257 = CARTESIAN_POINT('',(80.83165,-88.1231,-7.5E-02)); +#259258 = CIRCLE('',#259259,5.999932016263E-02); +#259259 = AXIS2_PLACEMENT_3D('',#259260,#259261,#259262); +#259260 = CARTESIAN_POINT('',(80.831649320159,-88.18309932015,-7.5E-02) + ); +#259261 = DIRECTION('',(0.,0.,-1.)); +#259262 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#259263 = ORIENTED_EDGE('',*,*,#259264,.T.); +#259264 = EDGE_CURVE('',#259256,#259265,#259267,.T.); +#259265 = VERTEX_POINT('',#259266); +#259266 = CARTESIAN_POINT('',(87.12165,-88.1231,-7.5E-02)); +#259267 = LINE('',#259268,#259269); +#259268 = CARTESIAN_POINT('',(80.83165,-88.1231,-7.5E-02)); +#259269 = VECTOR('',#259270,1.); +#259270 = DIRECTION('',(1.,0.,0.)); +#259271 = ORIENTED_EDGE('',*,*,#259272,.T.); +#259272 = EDGE_CURVE('',#259265,#258748,#259273,.T.); +#259273 = LINE('',#259274,#259275); +#259274 = CARTESIAN_POINT('',(87.12165,-88.1231,-7.5E-02)); +#259275 = VECTOR('',#259276,1.); +#259276 = DIRECTION('',(0.,1.,0.)); +#259277 = PLANE('',#259278); +#259278 = AXIS2_PLACEMENT_3D('',#259279,#259280,#259281); +#259279 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#259280 = DIRECTION('',(-0.,-0.,-1.)); +#259281 = DIRECTION('',(-1.,0.,0.)); +#259282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#259286)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#259283,#259284,#259285)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#259283 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#259284 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#259285 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#259286 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#259283, + 'distance_accuracy_value','confusion accuracy'); +#259287 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#259288,#259290); +#259288 = ( REPRESENTATION_RELATIONSHIP('','',#257975,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#259289) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#259289 = ITEM_DEFINED_TRANSFORMATION('','',#11,#499); +#259290 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #259291); +#259291 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('159','=>[0:1:1:70]','',#5, + #257970,$); +#259292 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#257972)); +#259293 = SHAPE_DEFINITION_REPRESENTATION(#259294,#259300); +#259294 = PRODUCT_DEFINITION_SHAPE('','',#259295); +#259295 = PRODUCT_DEFINITION('design','',#259296,#259299); +#259296 = PRODUCT_DEFINITION_FORMATION('','',#259297); +#259297 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_soldermask', + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_soldermask','',(#259298) + ); +#259298 = PRODUCT_CONTEXT('',#2,'mechanical'); +#259299 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#259300 = MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#11,#259301),#261429 + ); +#259301 = SHELL_BASED_SURFACE_MODEL('',(#259302)); +#259302 = OPEN_SHELL('',(#259303)); +#259303 = ADVANCED_FACE('',(#259304,#259338,#259349,#259360,#259371, + #259382,#259435,#259488,#259499,#259510,#259521,#259532,#259543, + #259554,#259565,#259618,#259671,#259682,#259693,#259704,#259715, + #259726,#259737,#259748,#259759,#259770,#259781,#259792,#259803, + #259814,#259825,#259836,#259847,#259858,#259869,#259880,#259891, + #259902,#259913,#259924,#259935,#259946,#259957,#259968,#259979, + #259990,#260001,#260012,#260023,#260034,#260045,#260056,#260090, + #260101,#260135,#260146,#260157,#260168,#260179,#260190,#260224, + #260235,#260246,#260257,#260268,#260279,#260290,#260301,#260312, + #260323,#260334,#260345,#260356,#260367,#260378,#260389,#260400, + #260411,#260422,#260433,#260444,#260455,#260466,#260477,#260488, + #260499,#260510,#260521,#260532,#260543,#260554,#260588,#260599, + #260610,#260621,#260632,#260643,#260654,#260665,#260676,#260687, + #260698,#260709,#260720,#260731,#260742,#260753,#260764,#260775, + #260786,#260797,#260808,#260819,#260830,#260841,#260852,#260863, + #260874,#260885,#260896,#260907,#260918,#260929,#260940,#260951, + #260962,#260973,#260984,#260995,#261006,#261017,#261028,#261039, + #261050,#261061,#261072,#261083,#261094,#261105,#261116,#261127, + #261138,#261149,#261160,#261171,#261182,#261193,#261204,#261215, + #261226,#261237,#261248,#261259,#261270,#261281,#261292,#261303, + #261314,#261325,#261336,#261347,#261358,#261369,#261380,#261391, + #261402,#261413),#261424,.T.); +#259304 = FACE_BOUND('',#259305,.F.); +#259305 = EDGE_LOOP('',(#259306,#259316,#259324,#259332)); +#259306 = ORIENTED_EDGE('',*,*,#259307,.T.); +#259307 = EDGE_CURVE('',#259308,#259310,#259312,.T.); +#259308 = VERTEX_POINT('',#259309); +#259309 = CARTESIAN_POINT('',(80.19165,-140.3231,1.56)); +#259310 = VERTEX_POINT('',#259311); +#259311 = CARTESIAN_POINT('',(80.19165,-40.3231,1.56)); +#259312 = LINE('',#259313,#259314); +#259313 = CARTESIAN_POINT('',(80.19165,-140.3231,1.56)); +#259314 = VECTOR('',#259315,1.); +#259315 = DIRECTION('',(0.,1.,0.)); +#259316 = ORIENTED_EDGE('',*,*,#259317,.T.); +#259317 = EDGE_CURVE('',#259310,#259318,#259320,.T.); +#259318 = VERTEX_POINT('',#259319); +#259319 = CARTESIAN_POINT('',(215.19165,-40.3231,1.56)); +#259320 = LINE('',#259321,#259322); +#259321 = CARTESIAN_POINT('',(80.19165,-40.3231,1.56)); +#259322 = VECTOR('',#259323,1.); +#259323 = DIRECTION('',(1.,0.,0.)); +#259324 = ORIENTED_EDGE('',*,*,#259325,.T.); +#259325 = EDGE_CURVE('',#259318,#259326,#259328,.T.); +#259326 = VERTEX_POINT('',#259327); +#259327 = CARTESIAN_POINT('',(215.19165,-140.3231,1.56)); +#259328 = LINE('',#259329,#259330); +#259329 = CARTESIAN_POINT('',(215.19165,-40.3231,1.56)); +#259330 = VECTOR('',#259331,1.); +#259331 = DIRECTION('',(0.,-1.,0.)); +#259332 = ORIENTED_EDGE('',*,*,#259333,.T.); +#259333 = EDGE_CURVE('',#259326,#259308,#259334,.T.); +#259334 = LINE('',#259335,#259336); +#259335 = CARTESIAN_POINT('',(215.19165,-140.3231,1.56)); +#259336 = VECTOR('',#259337,1.); +#259337 = DIRECTION('',(-1.,0.,0.)); +#259338 = FACE_BOUND('',#259339,.F.); +#259339 = EDGE_LOOP('',(#259340)); +#259340 = ORIENTED_EDGE('',*,*,#259341,.T.); +#259341 = EDGE_CURVE('',#259342,#259342,#259344,.T.); +#259342 = VERTEX_POINT('',#259343); +#259343 = CARTESIAN_POINT('',(199.729042,-137.8231,1.56)); +#259344 = CIRCLE('',#259345,0.537392); +#259345 = AXIS2_PLACEMENT_3D('',#259346,#259347,#259348); +#259346 = CARTESIAN_POINT('',(199.19165,-137.8231,1.56)); +#259347 = DIRECTION('',(0.,0.,1.)); +#259348 = DIRECTION('',(1.,0.,-0.)); +#259349 = FACE_BOUND('',#259350,.F.); +#259350 = EDGE_LOOP('',(#259351)); +#259351 = ORIENTED_EDGE('',*,*,#259352,.T.); +#259352 = EDGE_CURVE('',#259353,#259353,#259355,.T.); +#259353 = VERTEX_POINT('',#259354); +#259354 = CARTESIAN_POINT('',(206.229042,-137.8231,1.56)); +#259355 = CIRCLE('',#259356,0.537392); +#259356 = AXIS2_PLACEMENT_3D('',#259357,#259358,#259359); +#259357 = CARTESIAN_POINT('',(205.69165,-137.8231,1.56)); +#259358 = DIRECTION('',(0.,0.,1.)); +#259359 = DIRECTION('',(1.,0.,-0.)); +#259360 = FACE_BOUND('',#259361,.F.); +#259361 = EDGE_LOOP('',(#259362)); +#259362 = ORIENTED_EDGE('',*,*,#259363,.T.); +#259363 = EDGE_CURVE('',#259364,#259364,#259366,.T.); +#259364 = VERTEX_POINT('',#259365); +#259365 = CARTESIAN_POINT('',(86.779112,-135.3231,1.56)); +#259366 = CIRCLE('',#259367,1.587462); +#259367 = AXIS2_PLACEMENT_3D('',#259368,#259369,#259370); +#259368 = CARTESIAN_POINT('',(85.19165,-135.3231,1.56)); +#259369 = DIRECTION('',(0.,0.,1.)); +#259370 = DIRECTION('',(1.,0.,-0.)); +#259371 = FACE_BOUND('',#259372,.F.); +#259372 = EDGE_LOOP('',(#259373)); +#259373 = ORIENTED_EDGE('',*,*,#259374,.T.); +#259374 = EDGE_CURVE('',#259375,#259375,#259377,.T.); +#259375 = VERTEX_POINT('',#259376); +#259376 = CARTESIAN_POINT('',(212.779112,-135.3231,1.56)); +#259377 = CIRCLE('',#259378,1.587462); +#259378 = AXIS2_PLACEMENT_3D('',#259379,#259380,#259381); +#259379 = CARTESIAN_POINT('',(211.19165,-135.3231,1.56)); +#259380 = DIRECTION('',(0.,0.,1.)); +#259381 = DIRECTION('',(1.,0.,-0.)); +#259382 = FACE_BOUND('',#259383,.F.); +#259383 = EDGE_LOOP('',(#259384,#259395,#259403,#259412,#259420,#259429) + ); +#259384 = ORIENTED_EDGE('',*,*,#259385,.T.); +#259385 = EDGE_CURVE('',#259386,#259388,#259390,.T.); +#259386 = VERTEX_POINT('',#259387); +#259387 = CARTESIAN_POINT('',(159.5375,-134.184593,1.56)); +#259388 = VERTEX_POINT('',#259389); +#259389 = CARTESIAN_POINT('',(159.862513,-134.469933,1.56)); +#259390 = CIRCLE('',#259391,0.28758545494); +#259391 = AXIS2_PLACEMENT_3D('',#259392,#259393,#259394); +#259392 = CARTESIAN_POINT('',(159.82508538508,-134.184793442,1.56)); +#259393 = DIRECTION('',(0.,0.,1.)); +#259394 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#259395 = ORIENTED_EDGE('',*,*,#259396,.T.); +#259396 = EDGE_CURVE('',#259388,#259397,#259399,.T.); +#259397 = VERTEX_POINT('',#259398); +#259398 = CARTESIAN_POINT('',(159.93498,-134.450515,1.56)); +#259399 = LINE('',#259400,#259401); +#259400 = CARTESIAN_POINT('',(159.862513,-134.469933,1.56)); +#259401 = VECTOR('',#259402,1.); +#259402 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259403 = ORIENTED_EDGE('',*,*,#259404,.T.); +#259404 = EDGE_CURVE('',#259397,#259405,#259407,.T.); +#259405 = VERTEX_POINT('',#259406); +#259406 = CARTESIAN_POINT('',(160.1125,-134.184593,1.56)); +#259407 = CIRCLE('',#259408,0.287686427939); +#259408 = AXIS2_PLACEMENT_3D('',#259409,#259410,#259411); +#259409 = CARTESIAN_POINT('',(159.8248136193,-134.1847578751,1.56)); +#259410 = DIRECTION('',(0.,0.,1.)); +#259411 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259412 = ORIENTED_EDGE('',*,*,#259413,.T.); +#259413 = EDGE_CURVE('',#259405,#259414,#259416,.T.); +#259414 = VERTEX_POINT('',#259415); +#259415 = CARTESIAN_POINT('',(160.1125,-133.385406,1.56)); +#259416 = LINE('',#259417,#259418); +#259417 = CARTESIAN_POINT('',(160.1125,-134.184593,1.56)); +#259418 = VECTOR('',#259419,1.); +#259419 = DIRECTION('',(0.,1.,0.)); +#259420 = ORIENTED_EDGE('',*,*,#259421,.T.); +#259421 = EDGE_CURVE('',#259414,#259422,#259424,.T.); +#259422 = VERTEX_POINT('',#259423); +#259423 = CARTESIAN_POINT('',(159.5375,-133.385406,1.56)); +#259424 = CIRCLE('',#259425,0.287500026505); +#259425 = AXIS2_PLACEMENT_3D('',#259426,#259427,#259428); +#259426 = CARTESIAN_POINT('',(159.825,-133.3852825479,1.56)); +#259427 = DIRECTION('',(0.,0.,1.)); +#259428 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259429 = ORIENTED_EDGE('',*,*,#259430,.T.); +#259430 = EDGE_CURVE('',#259422,#259386,#259431,.T.); +#259431 = LINE('',#259432,#259433); +#259432 = CARTESIAN_POINT('',(159.5375,-133.385406,1.56)); +#259433 = VECTOR('',#259434,1.); +#259434 = DIRECTION('',(0.,-1.,0.)); +#259435 = FACE_BOUND('',#259436,.F.); +#259436 = EDGE_LOOP('',(#259437,#259448,#259456,#259465,#259473,#259482) + ); +#259437 = ORIENTED_EDGE('',*,*,#259438,.T.); +#259438 = EDGE_CURVE('',#259439,#259441,#259443,.T.); +#259439 = VERTEX_POINT('',#259440); +#259440 = CARTESIAN_POINT('',(168.1875,-134.184593,1.56)); +#259441 = VERTEX_POINT('',#259442); +#259442 = CARTESIAN_POINT('',(168.512513,-134.469933,1.56)); +#259443 = CIRCLE('',#259444,0.28758545494); +#259444 = AXIS2_PLACEMENT_3D('',#259445,#259446,#259447); +#259445 = CARTESIAN_POINT('',(168.47508538508,-134.184793442,1.56)); +#259446 = DIRECTION('',(0.,0.,1.)); +#259447 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#259448 = ORIENTED_EDGE('',*,*,#259449,.T.); +#259449 = EDGE_CURVE('',#259441,#259450,#259452,.T.); +#259450 = VERTEX_POINT('',#259451); +#259451 = CARTESIAN_POINT('',(168.58498,-134.450515,1.56)); +#259452 = LINE('',#259453,#259454); +#259453 = CARTESIAN_POINT('',(168.512513,-134.469933,1.56)); +#259454 = VECTOR('',#259455,1.); +#259455 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259456 = ORIENTED_EDGE('',*,*,#259457,.T.); +#259457 = EDGE_CURVE('',#259450,#259458,#259460,.T.); +#259458 = VERTEX_POINT('',#259459); +#259459 = CARTESIAN_POINT('',(168.7625,-134.184593,1.56)); +#259460 = CIRCLE('',#259461,0.287686427939); +#259461 = AXIS2_PLACEMENT_3D('',#259462,#259463,#259464); +#259462 = CARTESIAN_POINT('',(168.4748136193,-134.1847578751,1.56)); +#259463 = DIRECTION('',(0.,0.,1.)); +#259464 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259465 = ORIENTED_EDGE('',*,*,#259466,.T.); +#259466 = EDGE_CURVE('',#259458,#259467,#259469,.T.); +#259467 = VERTEX_POINT('',#259468); +#259468 = CARTESIAN_POINT('',(168.7625,-133.385406,1.56)); +#259469 = LINE('',#259470,#259471); +#259470 = CARTESIAN_POINT('',(168.7625,-134.184593,1.56)); +#259471 = VECTOR('',#259472,1.); +#259472 = DIRECTION('',(0.,1.,0.)); +#259473 = ORIENTED_EDGE('',*,*,#259474,.T.); +#259474 = EDGE_CURVE('',#259467,#259475,#259477,.T.); +#259475 = VERTEX_POINT('',#259476); +#259476 = CARTESIAN_POINT('',(168.1875,-133.385406,1.56)); +#259477 = CIRCLE('',#259478,0.287500026505); +#259478 = AXIS2_PLACEMENT_3D('',#259479,#259480,#259481); +#259479 = CARTESIAN_POINT('',(168.475,-133.3852825479,1.56)); +#259480 = DIRECTION('',(0.,0.,1.)); +#259481 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259482 = ORIENTED_EDGE('',*,*,#259483,.T.); +#259483 = EDGE_CURVE('',#259475,#259439,#259484,.T.); +#259484 = LINE('',#259485,#259486); +#259485 = CARTESIAN_POINT('',(168.1875,-133.385406,1.56)); +#259486 = VECTOR('',#259487,1.); +#259487 = DIRECTION('',(0.,-1.,0.)); +#259488 = FACE_BOUND('',#259489,.F.); +#259489 = EDGE_LOOP('',(#259490)); +#259490 = ORIENTED_EDGE('',*,*,#259491,.T.); +#259491 = EDGE_CURVE('',#259492,#259492,#259494,.T.); +#259492 = VERTEX_POINT('',#259493); +#259493 = CARTESIAN_POINT('',(173.329089,-133.8231,1.56)); +#259494 = CIRCLE('',#259495,0.637439); +#259495 = AXIS2_PLACEMENT_3D('',#259496,#259497,#259498); +#259496 = CARTESIAN_POINT('',(172.69165,-133.8231,1.56)); +#259497 = DIRECTION('',(0.,0.,1.)); +#259498 = DIRECTION('',(1.,0.,-0.)); +#259499 = FACE_BOUND('',#259500,.F.); +#259500 = EDGE_LOOP('',(#259501)); +#259501 = ORIENTED_EDGE('',*,*,#259502,.T.); +#259502 = EDGE_CURVE('',#259503,#259503,#259505,.T.); +#259503 = VERTEX_POINT('',#259504); +#259504 = CARTESIAN_POINT('',(178.329089,-133.8231,1.56)); +#259505 = CIRCLE('',#259506,0.637439); +#259506 = AXIS2_PLACEMENT_3D('',#259507,#259508,#259509); +#259507 = CARTESIAN_POINT('',(177.69165,-133.8231,1.56)); +#259508 = DIRECTION('',(0.,0.,1.)); +#259509 = DIRECTION('',(1.,0.,-0.)); +#259510 = FACE_BOUND('',#259511,.F.); +#259511 = EDGE_LOOP('',(#259512)); +#259512 = ORIENTED_EDGE('',*,*,#259513,.T.); +#259513 = EDGE_CURVE('',#259514,#259514,#259516,.T.); +#259514 = VERTEX_POINT('',#259515); +#259515 = CARTESIAN_POINT('',(183.329089,-133.8231,1.56)); +#259516 = CIRCLE('',#259517,0.637439); +#259517 = AXIS2_PLACEMENT_3D('',#259518,#259519,#259520); +#259518 = CARTESIAN_POINT('',(182.69165,-133.8231,1.56)); +#259519 = DIRECTION('',(0.,0.,1.)); +#259520 = DIRECTION('',(1.,0.,-0.)); +#259521 = FACE_BOUND('',#259522,.F.); +#259522 = EDGE_LOOP('',(#259523)); +#259523 = ORIENTED_EDGE('',*,*,#259524,.T.); +#259524 = EDGE_CURVE('',#259525,#259525,#259527,.T.); +#259525 = VERTEX_POINT('',#259526); +#259526 = CARTESIAN_POINT('',(188.329089,-133.8231,1.56)); +#259527 = CIRCLE('',#259528,0.637439); +#259528 = AXIS2_PLACEMENT_3D('',#259529,#259530,#259531); +#259529 = CARTESIAN_POINT('',(187.69165,-133.8231,1.56)); +#259530 = DIRECTION('',(0.,0.,1.)); +#259531 = DIRECTION('',(1.,0.,-0.)); +#259532 = FACE_BOUND('',#259533,.F.); +#259533 = EDGE_LOOP('',(#259534)); +#259534 = ORIENTED_EDGE('',*,*,#259535,.T.); +#259535 = EDGE_CURVE('',#259536,#259536,#259538,.T.); +#259536 = VERTEX_POINT('',#259537); +#259537 = CARTESIAN_POINT('',(193.329089,-133.8231,1.56)); +#259538 = CIRCLE('',#259539,0.637439); +#259539 = AXIS2_PLACEMENT_3D('',#259540,#259541,#259542); +#259540 = CARTESIAN_POINT('',(192.69165,-133.8231,1.56)); +#259541 = DIRECTION('',(0.,0.,1.)); +#259542 = DIRECTION('',(1.,0.,-0.)); +#259543 = FACE_BOUND('',#259544,.F.); +#259544 = EDGE_LOOP('',(#259545)); +#259545 = ORIENTED_EDGE('',*,*,#259546,.T.); +#259546 = EDGE_CURVE('',#259547,#259547,#259549,.T.); +#259547 = VERTEX_POINT('',#259548); +#259548 = CARTESIAN_POINT('',(199.729042,-133.3231,1.56)); +#259549 = CIRCLE('',#259550,0.537392); +#259550 = AXIS2_PLACEMENT_3D('',#259551,#259552,#259553); +#259551 = CARTESIAN_POINT('',(199.19165,-133.3231,1.56)); +#259552 = DIRECTION('',(0.,0.,1.)); +#259553 = DIRECTION('',(1.,0.,-0.)); +#259554 = FACE_BOUND('',#259555,.F.); +#259555 = EDGE_LOOP('',(#259556)); +#259556 = ORIENTED_EDGE('',*,*,#259557,.T.); +#259557 = EDGE_CURVE('',#259558,#259558,#259560,.T.); +#259558 = VERTEX_POINT('',#259559); +#259559 = CARTESIAN_POINT('',(206.229042,-133.3231,1.56)); +#259560 = CIRCLE('',#259561,0.537392); +#259561 = AXIS2_PLACEMENT_3D('',#259562,#259563,#259564); +#259562 = CARTESIAN_POINT('',(205.69165,-133.3231,1.56)); +#259563 = DIRECTION('',(0.,0.,1.)); +#259564 = DIRECTION('',(1.,0.,-0.)); +#259565 = FACE_BOUND('',#259566,.F.); +#259566 = EDGE_LOOP('',(#259567,#259578,#259586,#259595,#259603,#259612) + ); +#259567 = ORIENTED_EDGE('',*,*,#259568,.T.); +#259568 = EDGE_CURVE('',#259569,#259571,#259573,.T.); +#259569 = VERTEX_POINT('',#259570); +#259570 = CARTESIAN_POINT('',(159.5375,-131.154593,1.56)); +#259571 = VERTEX_POINT('',#259572); +#259572 = CARTESIAN_POINT('',(159.862513,-131.439933,1.56)); +#259573 = CIRCLE('',#259574,0.28758545494); +#259574 = AXIS2_PLACEMENT_3D('',#259575,#259576,#259577); +#259575 = CARTESIAN_POINT('',(159.82508538508,-131.154793442,1.56)); +#259576 = DIRECTION('',(0.,0.,1.)); +#259577 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#259578 = ORIENTED_EDGE('',*,*,#259579,.T.); +#259579 = EDGE_CURVE('',#259571,#259580,#259582,.T.); +#259580 = VERTEX_POINT('',#259581); +#259581 = CARTESIAN_POINT('',(159.93498,-131.420515,1.56)); +#259582 = LINE('',#259583,#259584); +#259583 = CARTESIAN_POINT('',(159.862513,-131.439933,1.56)); +#259584 = VECTOR('',#259585,1.); +#259585 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259586 = ORIENTED_EDGE('',*,*,#259587,.T.); +#259587 = EDGE_CURVE('',#259580,#259588,#259590,.T.); +#259588 = VERTEX_POINT('',#259589); +#259589 = CARTESIAN_POINT('',(160.1125,-131.154593,1.56)); +#259590 = CIRCLE('',#259591,0.287686427939); +#259591 = AXIS2_PLACEMENT_3D('',#259592,#259593,#259594); +#259592 = CARTESIAN_POINT('',(159.8248136193,-131.1547578751,1.56)); +#259593 = DIRECTION('',(0.,0.,1.)); +#259594 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259595 = ORIENTED_EDGE('',*,*,#259596,.T.); +#259596 = EDGE_CURVE('',#259588,#259597,#259599,.T.); +#259597 = VERTEX_POINT('',#259598); +#259598 = CARTESIAN_POINT('',(160.1125,-129.655406,1.56)); +#259599 = LINE('',#259600,#259601); +#259600 = CARTESIAN_POINT('',(160.1125,-131.154593,1.56)); +#259601 = VECTOR('',#259602,1.); +#259602 = DIRECTION('',(0.,1.,0.)); +#259603 = ORIENTED_EDGE('',*,*,#259604,.T.); +#259604 = EDGE_CURVE('',#259597,#259605,#259607,.T.); +#259605 = VERTEX_POINT('',#259606); +#259606 = CARTESIAN_POINT('',(159.5375,-129.655406,1.56)); +#259607 = CIRCLE('',#259608,0.287500026505); +#259608 = AXIS2_PLACEMENT_3D('',#259609,#259610,#259611); +#259609 = CARTESIAN_POINT('',(159.825,-129.6552825479,1.56)); +#259610 = DIRECTION('',(0.,0.,1.)); +#259611 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259612 = ORIENTED_EDGE('',*,*,#259613,.T.); +#259613 = EDGE_CURVE('',#259605,#259569,#259614,.T.); +#259614 = LINE('',#259615,#259616); +#259615 = CARTESIAN_POINT('',(159.5375,-129.655406,1.56)); +#259616 = VECTOR('',#259617,1.); +#259617 = DIRECTION('',(0.,-1.,0.)); +#259618 = FACE_BOUND('',#259619,.F.); +#259619 = EDGE_LOOP('',(#259620,#259631,#259639,#259648,#259656,#259665) + ); +#259620 = ORIENTED_EDGE('',*,*,#259621,.T.); +#259621 = EDGE_CURVE('',#259622,#259624,#259626,.T.); +#259622 = VERTEX_POINT('',#259623); +#259623 = CARTESIAN_POINT('',(168.1875,-131.154593,1.56)); +#259624 = VERTEX_POINT('',#259625); +#259625 = CARTESIAN_POINT('',(168.512513,-131.439933,1.56)); +#259626 = CIRCLE('',#259627,0.28758545494); +#259627 = AXIS2_PLACEMENT_3D('',#259628,#259629,#259630); +#259628 = CARTESIAN_POINT('',(168.47508538508,-131.154793442,1.56)); +#259629 = DIRECTION('',(0.,0.,1.)); +#259630 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#259631 = ORIENTED_EDGE('',*,*,#259632,.T.); +#259632 = EDGE_CURVE('',#259624,#259633,#259635,.T.); +#259633 = VERTEX_POINT('',#259634); +#259634 = CARTESIAN_POINT('',(168.58498,-131.420515,1.56)); +#259635 = LINE('',#259636,#259637); +#259636 = CARTESIAN_POINT('',(168.512513,-131.439933,1.56)); +#259637 = VECTOR('',#259638,1.); +#259638 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259639 = ORIENTED_EDGE('',*,*,#259640,.T.); +#259640 = EDGE_CURVE('',#259633,#259641,#259643,.T.); +#259641 = VERTEX_POINT('',#259642); +#259642 = CARTESIAN_POINT('',(168.7625,-131.154593,1.56)); +#259643 = CIRCLE('',#259644,0.287686427939); +#259644 = AXIS2_PLACEMENT_3D('',#259645,#259646,#259647); +#259645 = CARTESIAN_POINT('',(168.4748136193,-131.1547578751,1.56)); +#259646 = DIRECTION('',(0.,0.,1.)); +#259647 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259648 = ORIENTED_EDGE('',*,*,#259649,.T.); +#259649 = EDGE_CURVE('',#259641,#259650,#259652,.T.); +#259650 = VERTEX_POINT('',#259651); +#259651 = CARTESIAN_POINT('',(168.7625,-129.655406,1.56)); +#259652 = LINE('',#259653,#259654); +#259653 = CARTESIAN_POINT('',(168.7625,-131.154593,1.56)); +#259654 = VECTOR('',#259655,1.); +#259655 = DIRECTION('',(0.,1.,0.)); +#259656 = ORIENTED_EDGE('',*,*,#259657,.T.); +#259657 = EDGE_CURVE('',#259650,#259658,#259660,.T.); +#259658 = VERTEX_POINT('',#259659); +#259659 = CARTESIAN_POINT('',(168.1875,-129.655406,1.56)); +#259660 = CIRCLE('',#259661,0.287500026505); +#259661 = AXIS2_PLACEMENT_3D('',#259662,#259663,#259664); +#259662 = CARTESIAN_POINT('',(168.475,-129.6552825479,1.56)); +#259663 = DIRECTION('',(0.,0.,1.)); +#259664 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259665 = ORIENTED_EDGE('',*,*,#259666,.T.); +#259666 = EDGE_CURVE('',#259658,#259622,#259667,.T.); +#259667 = LINE('',#259668,#259669); +#259668 = CARTESIAN_POINT('',(168.1875,-129.655406,1.56)); +#259669 = VECTOR('',#259670,1.); +#259670 = DIRECTION('',(0.,-1.,0.)); +#259671 = FACE_BOUND('',#259672,.F.); +#259672 = EDGE_LOOP('',(#259673)); +#259673 = ORIENTED_EDGE('',*,*,#259674,.T.); +#259674 = EDGE_CURVE('',#259675,#259675,#259677,.T.); +#259675 = VERTEX_POINT('',#259676); +#259676 = CARTESIAN_POINT('',(161.362254,-130.775,1.56)); +#259677 = CIRCLE('',#259678,0.187254); +#259678 = AXIS2_PLACEMENT_3D('',#259679,#259680,#259681); +#259679 = CARTESIAN_POINT('',(161.175,-130.775,1.56)); +#259680 = DIRECTION('',(0.,0.,1.)); +#259681 = DIRECTION('',(1.,0.,-0.)); +#259682 = FACE_BOUND('',#259683,.F.); +#259683 = EDGE_LOOP('',(#259684)); +#259684 = ORIENTED_EDGE('',*,*,#259685,.T.); +#259685 = EDGE_CURVE('',#259686,#259686,#259688,.T.); +#259686 = VERTEX_POINT('',#259687); +#259687 = CARTESIAN_POINT('',(162.212254,-130.775,1.56)); +#259688 = CIRCLE('',#259689,0.187254); +#259689 = AXIS2_PLACEMENT_3D('',#259690,#259691,#259692); +#259690 = CARTESIAN_POINT('',(162.025,-130.775,1.56)); +#259691 = DIRECTION('',(0.,0.,1.)); +#259692 = DIRECTION('',(1.,0.,-0.)); +#259693 = FACE_BOUND('',#259694,.F.); +#259694 = EDGE_LOOP('',(#259695)); +#259695 = ORIENTED_EDGE('',*,*,#259696,.T.); +#259696 = EDGE_CURVE('',#259697,#259697,#259699,.T.); +#259697 = VERTEX_POINT('',#259698); +#259698 = CARTESIAN_POINT('',(163.062254,-130.775,1.56)); +#259699 = CIRCLE('',#259700,0.187254); +#259700 = AXIS2_PLACEMENT_3D('',#259701,#259702,#259703); +#259701 = CARTESIAN_POINT('',(162.875,-130.775,1.56)); +#259702 = DIRECTION('',(0.,0.,1.)); +#259703 = DIRECTION('',(1.,0.,-0.)); +#259704 = FACE_BOUND('',#259705,.F.); +#259705 = EDGE_LOOP('',(#259706)); +#259706 = ORIENTED_EDGE('',*,*,#259707,.T.); +#259707 = EDGE_CURVE('',#259708,#259708,#259710,.T.); +#259708 = VERTEX_POINT('',#259709); +#259709 = CARTESIAN_POINT('',(163.912254,-130.775,1.56)); +#259710 = CIRCLE('',#259711,0.187254); +#259711 = AXIS2_PLACEMENT_3D('',#259712,#259713,#259714); +#259712 = CARTESIAN_POINT('',(163.725,-130.775,1.56)); +#259713 = DIRECTION('',(0.,0.,1.)); +#259714 = DIRECTION('',(1.,0.,-0.)); +#259715 = FACE_BOUND('',#259716,.F.); +#259716 = EDGE_LOOP('',(#259717)); +#259717 = ORIENTED_EDGE('',*,*,#259718,.T.); +#259718 = EDGE_CURVE('',#259719,#259719,#259721,.T.); +#259719 = VERTEX_POINT('',#259720); +#259720 = CARTESIAN_POINT('',(164.762254,-130.775,1.56)); +#259721 = CIRCLE('',#259722,0.187254); +#259722 = AXIS2_PLACEMENT_3D('',#259723,#259724,#259725); +#259723 = CARTESIAN_POINT('',(164.575,-130.775,1.56)); +#259724 = DIRECTION('',(0.,0.,1.)); +#259725 = DIRECTION('',(1.,0.,-0.)); +#259726 = FACE_BOUND('',#259727,.F.); +#259727 = EDGE_LOOP('',(#259728)); +#259728 = ORIENTED_EDGE('',*,*,#259729,.T.); +#259729 = EDGE_CURVE('',#259730,#259730,#259732,.T.); +#259730 = VERTEX_POINT('',#259731); +#259731 = CARTESIAN_POINT('',(165.612254,-130.775,1.56)); +#259732 = CIRCLE('',#259733,0.187254); +#259733 = AXIS2_PLACEMENT_3D('',#259734,#259735,#259736); +#259734 = CARTESIAN_POINT('',(165.425,-130.775,1.56)); +#259735 = DIRECTION('',(0.,0.,1.)); +#259736 = DIRECTION('',(1.,0.,-0.)); +#259737 = FACE_BOUND('',#259738,.F.); +#259738 = EDGE_LOOP('',(#259739)); +#259739 = ORIENTED_EDGE('',*,*,#259740,.T.); +#259740 = EDGE_CURVE('',#259741,#259741,#259743,.T.); +#259741 = VERTEX_POINT('',#259742); +#259742 = CARTESIAN_POINT('',(166.462254,-130.775,1.56)); +#259743 = CIRCLE('',#259744,0.187254); +#259744 = AXIS2_PLACEMENT_3D('',#259745,#259746,#259747); +#259745 = CARTESIAN_POINT('',(166.275,-130.775,1.56)); +#259746 = DIRECTION('',(0.,0.,1.)); +#259747 = DIRECTION('',(1.,0.,-0.)); +#259748 = FACE_BOUND('',#259749,.F.); +#259749 = EDGE_LOOP('',(#259750)); +#259750 = ORIENTED_EDGE('',*,*,#259751,.T.); +#259751 = EDGE_CURVE('',#259752,#259752,#259754,.T.); +#259752 = VERTEX_POINT('',#259753); +#259753 = CARTESIAN_POINT('',(167.312254,-130.775,1.56)); +#259754 = CIRCLE('',#259755,0.187254); +#259755 = AXIS2_PLACEMENT_3D('',#259756,#259757,#259758); +#259756 = CARTESIAN_POINT('',(167.125,-130.775,1.56)); +#259757 = DIRECTION('',(0.,0.,1.)); +#259758 = DIRECTION('',(1.,0.,-0.)); +#259759 = FACE_BOUND('',#259760,.F.); +#259760 = EDGE_LOOP('',(#259761)); +#259761 = ORIENTED_EDGE('',*,*,#259762,.T.); +#259762 = EDGE_CURVE('',#259763,#259763,#259765,.T.); +#259763 = VERTEX_POINT('',#259764); +#259764 = CARTESIAN_POINT('',(115.739042,-129.5831,1.56)); +#259765 = CIRCLE('',#259766,0.487392); +#259766 = AXIS2_PLACEMENT_3D('',#259767,#259768,#259769); +#259767 = CARTESIAN_POINT('',(115.25165,-129.5831,1.56)); +#259768 = DIRECTION('',(0.,0.,1.)); +#259769 = DIRECTION('',(1.,0.,-0.)); +#259770 = FACE_BOUND('',#259771,.F.); +#259771 = EDGE_LOOP('',(#259772)); +#259772 = ORIENTED_EDGE('',*,*,#259773,.T.); +#259773 = EDGE_CURVE('',#259774,#259774,#259776,.T.); +#259774 = VERTEX_POINT('',#259775); +#259775 = CARTESIAN_POINT('',(118.279042,-129.5831,1.56)); +#259776 = CIRCLE('',#259777,0.487392); +#259777 = AXIS2_PLACEMENT_3D('',#259778,#259779,#259780); +#259778 = CARTESIAN_POINT('',(117.79165,-129.5831,1.56)); +#259779 = DIRECTION('',(0.,0.,1.)); +#259780 = DIRECTION('',(1.,0.,-0.)); +#259781 = FACE_BOUND('',#259782,.F.); +#259782 = EDGE_LOOP('',(#259783)); +#259783 = ORIENTED_EDGE('',*,*,#259784,.T.); +#259784 = EDGE_CURVE('',#259785,#259785,#259787,.T.); +#259785 = VERTEX_POINT('',#259786); +#259786 = CARTESIAN_POINT('',(120.819042,-129.5831,1.56)); +#259787 = CIRCLE('',#259788,0.487392); +#259788 = AXIS2_PLACEMENT_3D('',#259789,#259790,#259791); +#259789 = CARTESIAN_POINT('',(120.33165,-129.5831,1.56)); +#259790 = DIRECTION('',(0.,0.,1.)); +#259791 = DIRECTION('',(1.,0.,-0.)); +#259792 = FACE_BOUND('',#259793,.F.); +#259793 = EDGE_LOOP('',(#259794)); +#259794 = ORIENTED_EDGE('',*,*,#259795,.T.); +#259795 = EDGE_CURVE('',#259796,#259796,#259798,.T.); +#259796 = VERTEX_POINT('',#259797); +#259797 = CARTESIAN_POINT('',(123.359042,-129.5831,1.56)); +#259798 = CIRCLE('',#259799,0.487392); +#259799 = AXIS2_PLACEMENT_3D('',#259800,#259801,#259802); +#259800 = CARTESIAN_POINT('',(122.87165,-129.5831,1.56)); +#259801 = DIRECTION('',(0.,0.,1.)); +#259802 = DIRECTION('',(1.,0.,-0.)); +#259803 = FACE_BOUND('',#259804,.F.); +#259804 = EDGE_LOOP('',(#259805)); +#259805 = ORIENTED_EDGE('',*,*,#259806,.T.); +#259806 = EDGE_CURVE('',#259807,#259807,#259809,.T.); +#259807 = VERTEX_POINT('',#259808); +#259808 = CARTESIAN_POINT('',(125.899042,-129.5831,1.56)); +#259809 = CIRCLE('',#259810,0.487392); +#259810 = AXIS2_PLACEMENT_3D('',#259811,#259812,#259813); +#259811 = CARTESIAN_POINT('',(125.41165,-129.5831,1.56)); +#259812 = DIRECTION('',(0.,0.,1.)); +#259813 = DIRECTION('',(1.,0.,-0.)); +#259814 = FACE_BOUND('',#259815,.F.); +#259815 = EDGE_LOOP('',(#259816)); +#259816 = ORIENTED_EDGE('',*,*,#259817,.T.); +#259817 = EDGE_CURVE('',#259818,#259818,#259820,.T.); +#259818 = VERTEX_POINT('',#259819); +#259819 = CARTESIAN_POINT('',(128.439042,-129.5831,1.56)); +#259820 = CIRCLE('',#259821,0.487392); +#259821 = AXIS2_PLACEMENT_3D('',#259822,#259823,#259824); +#259822 = CARTESIAN_POINT('',(127.95165,-129.5831,1.56)); +#259823 = DIRECTION('',(0.,0.,1.)); +#259824 = DIRECTION('',(1.,0.,-0.)); +#259825 = FACE_BOUND('',#259826,.F.); +#259826 = EDGE_LOOP('',(#259827)); +#259827 = ORIENTED_EDGE('',*,*,#259828,.T.); +#259828 = EDGE_CURVE('',#259829,#259829,#259831,.T.); +#259829 = VERTEX_POINT('',#259830); +#259830 = CARTESIAN_POINT('',(130.979042,-129.5831,1.56)); +#259831 = CIRCLE('',#259832,0.487392); +#259832 = AXIS2_PLACEMENT_3D('',#259833,#259834,#259835); +#259833 = CARTESIAN_POINT('',(130.49165,-129.5831,1.56)); +#259834 = DIRECTION('',(0.,0.,1.)); +#259835 = DIRECTION('',(1.,0.,-0.)); +#259836 = FACE_BOUND('',#259837,.F.); +#259837 = EDGE_LOOP('',(#259838)); +#259838 = ORIENTED_EDGE('',*,*,#259839,.T.); +#259839 = EDGE_CURVE('',#259840,#259840,#259842,.T.); +#259840 = VERTEX_POINT('',#259841); +#259841 = CARTESIAN_POINT('',(133.519042,-129.5831,1.56)); +#259842 = CIRCLE('',#259843,0.487392); +#259843 = AXIS2_PLACEMENT_3D('',#259844,#259845,#259846); +#259844 = CARTESIAN_POINT('',(133.03165,-129.5831,1.56)); +#259845 = DIRECTION('',(0.,0.,1.)); +#259846 = DIRECTION('',(1.,0.,-0.)); +#259847 = FACE_BOUND('',#259848,.F.); +#259848 = EDGE_LOOP('',(#259849)); +#259849 = ORIENTED_EDGE('',*,*,#259850,.T.); +#259850 = EDGE_CURVE('',#259851,#259851,#259853,.T.); +#259851 = VERTEX_POINT('',#259852); +#259852 = CARTESIAN_POINT('',(138.599042,-129.5831,1.56)); +#259853 = CIRCLE('',#259854,0.487392); +#259854 = AXIS2_PLACEMENT_3D('',#259855,#259856,#259857); +#259855 = CARTESIAN_POINT('',(138.11165,-129.5831,1.56)); +#259856 = DIRECTION('',(0.,0.,1.)); +#259857 = DIRECTION('',(1.,0.,-0.)); +#259858 = FACE_BOUND('',#259859,.F.); +#259859 = EDGE_LOOP('',(#259860)); +#259860 = ORIENTED_EDGE('',*,*,#259861,.T.); +#259861 = EDGE_CURVE('',#259862,#259862,#259864,.T.); +#259862 = VERTEX_POINT('',#259863); +#259863 = CARTESIAN_POINT('',(141.139042,-129.5831,1.56)); +#259864 = CIRCLE('',#259865,0.487392); +#259865 = AXIS2_PLACEMENT_3D('',#259866,#259867,#259868); +#259866 = CARTESIAN_POINT('',(140.65165,-129.5831,1.56)); +#259867 = DIRECTION('',(0.,0.,1.)); +#259868 = DIRECTION('',(1.,0.,-0.)); +#259869 = FACE_BOUND('',#259870,.F.); +#259870 = EDGE_LOOP('',(#259871)); +#259871 = ORIENTED_EDGE('',*,*,#259872,.T.); +#259872 = EDGE_CURVE('',#259873,#259873,#259875,.T.); +#259873 = VERTEX_POINT('',#259874); +#259874 = CARTESIAN_POINT('',(143.679042,-129.5831,1.56)); +#259875 = CIRCLE('',#259876,0.487392); +#259876 = AXIS2_PLACEMENT_3D('',#259877,#259878,#259879); +#259877 = CARTESIAN_POINT('',(143.19165,-129.5831,1.56)); +#259878 = DIRECTION('',(0.,0.,1.)); +#259879 = DIRECTION('',(1.,0.,-0.)); +#259880 = FACE_BOUND('',#259881,.F.); +#259881 = EDGE_LOOP('',(#259882)); +#259882 = ORIENTED_EDGE('',*,*,#259883,.T.); +#259883 = EDGE_CURVE('',#259884,#259884,#259886,.T.); +#259884 = VERTEX_POINT('',#259885); +#259885 = CARTESIAN_POINT('',(146.219042,-129.5831,1.56)); +#259886 = CIRCLE('',#259887,0.487392); +#259887 = AXIS2_PLACEMENT_3D('',#259888,#259889,#259890); +#259888 = CARTESIAN_POINT('',(145.73165,-129.5831,1.56)); +#259889 = DIRECTION('',(0.,0.,1.)); +#259890 = DIRECTION('',(1.,0.,-0.)); +#259891 = FACE_BOUND('',#259892,.F.); +#259892 = EDGE_LOOP('',(#259893)); +#259893 = ORIENTED_EDGE('',*,*,#259894,.T.); +#259894 = EDGE_CURVE('',#259895,#259895,#259897,.T.); +#259895 = VERTEX_POINT('',#259896); +#259896 = CARTESIAN_POINT('',(148.759042,-129.5831,1.56)); +#259897 = CIRCLE('',#259898,0.487392); +#259898 = AXIS2_PLACEMENT_3D('',#259899,#259900,#259901); +#259899 = CARTESIAN_POINT('',(148.27165,-129.5831,1.56)); +#259900 = DIRECTION('',(0.,0.,1.)); +#259901 = DIRECTION('',(1.,0.,-0.)); +#259902 = FACE_BOUND('',#259903,.F.); +#259903 = EDGE_LOOP('',(#259904)); +#259904 = ORIENTED_EDGE('',*,*,#259905,.T.); +#259905 = EDGE_CURVE('',#259906,#259906,#259908,.T.); +#259906 = VERTEX_POINT('',#259907); +#259907 = CARTESIAN_POINT('',(151.299042,-129.5831,1.56)); +#259908 = CIRCLE('',#259909,0.487392); +#259909 = AXIS2_PLACEMENT_3D('',#259910,#259911,#259912); +#259910 = CARTESIAN_POINT('',(150.81165,-129.5831,1.56)); +#259911 = DIRECTION('',(0.,0.,1.)); +#259912 = DIRECTION('',(1.,0.,-0.)); +#259913 = FACE_BOUND('',#259914,.F.); +#259914 = EDGE_LOOP('',(#259915)); +#259915 = ORIENTED_EDGE('',*,*,#259916,.T.); +#259916 = EDGE_CURVE('',#259917,#259917,#259919,.T.); +#259917 = VERTEX_POINT('',#259918); +#259918 = CARTESIAN_POINT('',(161.362254,-129.425,1.56)); +#259919 = CIRCLE('',#259920,0.187254); +#259920 = AXIS2_PLACEMENT_3D('',#259921,#259922,#259923); +#259921 = CARTESIAN_POINT('',(161.175,-129.425,1.56)); +#259922 = DIRECTION('',(0.,0.,1.)); +#259923 = DIRECTION('',(1.,0.,-0.)); +#259924 = FACE_BOUND('',#259925,.F.); +#259925 = EDGE_LOOP('',(#259926)); +#259926 = ORIENTED_EDGE('',*,*,#259927,.T.); +#259927 = EDGE_CURVE('',#259928,#259928,#259930,.T.); +#259928 = VERTEX_POINT('',#259929); +#259929 = CARTESIAN_POINT('',(162.212254,-129.425,1.56)); +#259930 = CIRCLE('',#259931,0.187254); +#259931 = AXIS2_PLACEMENT_3D('',#259932,#259933,#259934); +#259932 = CARTESIAN_POINT('',(162.025,-129.425,1.56)); +#259933 = DIRECTION('',(0.,0.,1.)); +#259934 = DIRECTION('',(1.,0.,-0.)); +#259935 = FACE_BOUND('',#259936,.F.); +#259936 = EDGE_LOOP('',(#259937)); +#259937 = ORIENTED_EDGE('',*,*,#259938,.T.); +#259938 = EDGE_CURVE('',#259939,#259939,#259941,.T.); +#259939 = VERTEX_POINT('',#259940); +#259940 = CARTESIAN_POINT('',(163.062254,-129.425,1.56)); +#259941 = CIRCLE('',#259942,0.187254); +#259942 = AXIS2_PLACEMENT_3D('',#259943,#259944,#259945); +#259943 = CARTESIAN_POINT('',(162.875,-129.425,1.56)); +#259944 = DIRECTION('',(0.,0.,1.)); +#259945 = DIRECTION('',(1.,0.,-0.)); +#259946 = FACE_BOUND('',#259947,.F.); +#259947 = EDGE_LOOP('',(#259948)); +#259948 = ORIENTED_EDGE('',*,*,#259949,.T.); +#259949 = EDGE_CURVE('',#259950,#259950,#259952,.T.); +#259950 = VERTEX_POINT('',#259951); +#259951 = CARTESIAN_POINT('',(163.912254,-129.425,1.56)); +#259952 = CIRCLE('',#259953,0.187254); +#259953 = AXIS2_PLACEMENT_3D('',#259954,#259955,#259956); +#259954 = CARTESIAN_POINT('',(163.725,-129.425,1.56)); +#259955 = DIRECTION('',(0.,0.,1.)); +#259956 = DIRECTION('',(1.,0.,-0.)); +#259957 = FACE_BOUND('',#259958,.F.); +#259958 = EDGE_LOOP('',(#259959)); +#259959 = ORIENTED_EDGE('',*,*,#259960,.T.); +#259960 = EDGE_CURVE('',#259961,#259961,#259963,.T.); +#259961 = VERTEX_POINT('',#259962); +#259962 = CARTESIAN_POINT('',(164.762254,-129.425,1.56)); +#259963 = CIRCLE('',#259964,0.187254); +#259964 = AXIS2_PLACEMENT_3D('',#259965,#259966,#259967); +#259965 = CARTESIAN_POINT('',(164.575,-129.425,1.56)); +#259966 = DIRECTION('',(0.,0.,1.)); +#259967 = DIRECTION('',(1.,0.,-0.)); +#259968 = FACE_BOUND('',#259969,.F.); +#259969 = EDGE_LOOP('',(#259970)); +#259970 = ORIENTED_EDGE('',*,*,#259971,.T.); +#259971 = EDGE_CURVE('',#259972,#259972,#259974,.T.); +#259972 = VERTEX_POINT('',#259973); +#259973 = CARTESIAN_POINT('',(165.612254,-129.425,1.56)); +#259974 = CIRCLE('',#259975,0.187254); +#259975 = AXIS2_PLACEMENT_3D('',#259976,#259977,#259978); +#259976 = CARTESIAN_POINT('',(165.425,-129.425,1.56)); +#259977 = DIRECTION('',(0.,0.,1.)); +#259978 = DIRECTION('',(1.,0.,-0.)); +#259979 = FACE_BOUND('',#259980,.F.); +#259980 = EDGE_LOOP('',(#259981)); +#259981 = ORIENTED_EDGE('',*,*,#259982,.T.); +#259982 = EDGE_CURVE('',#259983,#259983,#259985,.T.); +#259983 = VERTEX_POINT('',#259984); +#259984 = CARTESIAN_POINT('',(166.462254,-129.425,1.56)); +#259985 = CIRCLE('',#259986,0.187254); +#259986 = AXIS2_PLACEMENT_3D('',#259987,#259988,#259989); +#259987 = CARTESIAN_POINT('',(166.275,-129.425,1.56)); +#259988 = DIRECTION('',(0.,0.,1.)); +#259989 = DIRECTION('',(1.,0.,-0.)); +#259990 = FACE_BOUND('',#259991,.F.); +#259991 = EDGE_LOOP('',(#259992)); +#259992 = ORIENTED_EDGE('',*,*,#259993,.T.); +#259993 = EDGE_CURVE('',#259994,#259994,#259996,.T.); +#259994 = VERTEX_POINT('',#259995); +#259995 = CARTESIAN_POINT('',(167.312254,-129.425,1.56)); +#259996 = CIRCLE('',#259997,0.187254); +#259997 = AXIS2_PLACEMENT_3D('',#259998,#259999,#260000); +#259998 = CARTESIAN_POINT('',(167.125,-129.425,1.56)); +#259999 = DIRECTION('',(0.,0.,1.)); +#260000 = DIRECTION('',(1.,0.,-0.)); +#260001 = FACE_BOUND('',#260002,.F.); +#260002 = EDGE_LOOP('',(#260003)); +#260003 = ORIENTED_EDGE('',*,*,#260004,.T.); +#260004 = EDGE_CURVE('',#260005,#260005,#260007,.T.); +#260005 = VERTEX_POINT('',#260006); +#260006 = CARTESIAN_POINT('',(210.679042,-121.3231,1.56)); +#260007 = CIRCLE('',#260008,0.487392); +#260008 = AXIS2_PLACEMENT_3D('',#260009,#260010,#260011); +#260009 = CARTESIAN_POINT('',(210.19165,-121.3231,1.56)); +#260010 = DIRECTION('',(0.,0.,1.)); +#260011 = DIRECTION('',(1.,0.,-0.)); +#260012 = FACE_BOUND('',#260013,.F.); +#260013 = EDGE_LOOP('',(#260014)); +#260014 = ORIENTED_EDGE('',*,*,#260015,.T.); +#260015 = EDGE_CURVE('',#260016,#260016,#260018,.T.); +#260016 = VERTEX_POINT('',#260017); +#260017 = CARTESIAN_POINT('',(210.679042,-118.8231,1.56)); +#260018 = CIRCLE('',#260019,0.487392); +#260019 = AXIS2_PLACEMENT_3D('',#260020,#260021,#260022); +#260020 = CARTESIAN_POINT('',(210.19165,-118.8231,1.56)); +#260021 = DIRECTION('',(0.,0.,1.)); +#260022 = DIRECTION('',(1.,0.,-0.)); +#260023 = FACE_BOUND('',#260024,.F.); +#260024 = EDGE_LOOP('',(#260025)); +#260025 = ORIENTED_EDGE('',*,*,#260026,.T.); +#260026 = EDGE_CURVE('',#260027,#260027,#260029,.T.); +#260027 = VERTEX_POINT('',#260028); +#260028 = CARTESIAN_POINT('',(210.654042,-108.3231,1.56)); +#260029 = CIRCLE('',#260030,0.462392); +#260030 = AXIS2_PLACEMENT_3D('',#260031,#260032,#260033); +#260031 = CARTESIAN_POINT('',(210.19165,-108.3231,1.56)); +#260032 = DIRECTION('',(0.,0.,1.)); +#260033 = DIRECTION('',(1.,0.,-0.)); +#260034 = FACE_BOUND('',#260035,.F.); +#260035 = EDGE_LOOP('',(#260036)); +#260036 = ORIENTED_EDGE('',*,*,#260037,.T.); +#260037 = EDGE_CURVE('',#260038,#260038,#260040,.T.); +#260038 = VERTEX_POINT('',#260039); +#260039 = CARTESIAN_POINT('',(210.654042,-105.8231,1.56)); +#260040 = CIRCLE('',#260041,0.462392); +#260041 = AXIS2_PLACEMENT_3D('',#260042,#260043,#260044); +#260042 = CARTESIAN_POINT('',(210.19165,-105.8231,1.56)); +#260043 = DIRECTION('',(0.,0.,1.)); +#260044 = DIRECTION('',(1.,0.,-0.)); +#260045 = FACE_BOUND('',#260046,.F.); +#260046 = EDGE_LOOP('',(#260047)); +#260047 = ORIENTED_EDGE('',*,*,#260048,.T.); +#260048 = EDGE_CURVE('',#260049,#260049,#260051,.T.); +#260049 = VERTEX_POINT('',#260050); +#260050 = CARTESIAN_POINT('',(210.654042,-103.3231,1.56)); +#260051 = CIRCLE('',#260052,0.462392); +#260052 = AXIS2_PLACEMENT_3D('',#260053,#260054,#260055); +#260053 = CARTESIAN_POINT('',(210.19165,-103.3231,1.56)); +#260054 = DIRECTION('',(0.,0.,1.)); +#260055 = DIRECTION('',(1.,0.,-0.)); +#260056 = FACE_BOUND('',#260057,.F.); +#260057 = EDGE_LOOP('',(#260058,#260068,#260076,#260084)); +#260058 = ORIENTED_EDGE('',*,*,#260059,.T.); +#260059 = EDGE_CURVE('',#260060,#260062,#260064,.T.); +#260060 = VERTEX_POINT('',#260061); +#260061 = CARTESIAN_POINT('',(142.14165,-100.5731,1.56)); +#260062 = VERTEX_POINT('',#260063); +#260063 = CARTESIAN_POINT('',(142.14165,-99.0731,1.56)); +#260064 = LINE('',#260065,#260066); +#260065 = CARTESIAN_POINT('',(142.14165,-100.5731,1.56)); +#260066 = VECTOR('',#260067,1.); +#260067 = DIRECTION('',(0.,1.,0.)); +#260068 = ORIENTED_EDGE('',*,*,#260069,.T.); +#260069 = EDGE_CURVE('',#260062,#260070,#260072,.T.); +#260070 = VERTEX_POINT('',#260071); +#260071 = CARTESIAN_POINT('',(140.64165,-99.0731,1.56)); +#260072 = LINE('',#260073,#260074); +#260073 = CARTESIAN_POINT('',(142.14165,-99.0731,1.56)); +#260074 = VECTOR('',#260075,1.); +#260075 = DIRECTION('',(-1.,0.,0.)); +#260076 = ORIENTED_EDGE('',*,*,#260077,.T.); +#260077 = EDGE_CURVE('',#260070,#260078,#260080,.T.); +#260078 = VERTEX_POINT('',#260079); +#260079 = CARTESIAN_POINT('',(140.64165,-100.5731,1.56)); +#260080 = LINE('',#260081,#260082); +#260081 = CARTESIAN_POINT('',(140.64165,-99.0731,1.56)); +#260082 = VECTOR('',#260083,1.); +#260083 = DIRECTION('',(0.,-1.,0.)); +#260084 = ORIENTED_EDGE('',*,*,#260085,.T.); +#260085 = EDGE_CURVE('',#260078,#260060,#260086,.T.); +#260086 = LINE('',#260087,#260088); +#260087 = CARTESIAN_POINT('',(140.64165,-100.5731,1.56)); +#260088 = VECTOR('',#260089,1.); +#260089 = DIRECTION('',(1.,0.,0.)); +#260090 = FACE_BOUND('',#260091,.F.); +#260091 = EDGE_LOOP('',(#260092)); +#260092 = ORIENTED_EDGE('',*,*,#260093,.T.); +#260093 = EDGE_CURVE('',#260094,#260094,#260096,.T.); +#260094 = VERTEX_POINT('',#260095); +#260095 = CARTESIAN_POINT('',(210.654042,-95.3231,1.56)); +#260096 = CIRCLE('',#260097,0.462392); +#260097 = AXIS2_PLACEMENT_3D('',#260098,#260099,#260100); +#260098 = CARTESIAN_POINT('',(210.19165,-95.3231,1.56)); +#260099 = DIRECTION('',(0.,0.,1.)); +#260100 = DIRECTION('',(1.,0.,-0.)); +#260101 = FACE_BOUND('',#260102,.F.); +#260102 = EDGE_LOOP('',(#260103,#260113,#260121,#260129)); +#260103 = ORIENTED_EDGE('',*,*,#260104,.T.); +#260104 = EDGE_CURVE('',#260105,#260107,#260109,.T.); +#260105 = VERTEX_POINT('',#260106); +#260106 = CARTESIAN_POINT('',(142.14165,-95.5731,1.56)); +#260107 = VERTEX_POINT('',#260108); +#260108 = CARTESIAN_POINT('',(142.14165,-94.0731,1.56)); +#260109 = LINE('',#260110,#260111); +#260110 = CARTESIAN_POINT('',(142.14165,-95.5731,1.56)); +#260111 = VECTOR('',#260112,1.); +#260112 = DIRECTION('',(0.,1.,0.)); +#260113 = ORIENTED_EDGE('',*,*,#260114,.T.); +#260114 = EDGE_CURVE('',#260107,#260115,#260117,.T.); +#260115 = VERTEX_POINT('',#260116); +#260116 = CARTESIAN_POINT('',(140.64165,-94.0731,1.56)); +#260117 = LINE('',#260118,#260119); +#260118 = CARTESIAN_POINT('',(142.14165,-94.0731,1.56)); +#260119 = VECTOR('',#260120,1.); +#260120 = DIRECTION('',(-1.,0.,0.)); +#260121 = ORIENTED_EDGE('',*,*,#260122,.T.); +#260122 = EDGE_CURVE('',#260115,#260123,#260125,.T.); +#260123 = VERTEX_POINT('',#260124); +#260124 = CARTESIAN_POINT('',(140.64165,-95.5731,1.56)); +#260125 = LINE('',#260126,#260127); +#260126 = CARTESIAN_POINT('',(140.64165,-94.0731,1.56)); +#260127 = VECTOR('',#260128,1.); +#260128 = DIRECTION('',(0.,-1.,0.)); +#260129 = ORIENTED_EDGE('',*,*,#260130,.T.); +#260130 = EDGE_CURVE('',#260123,#260105,#260131,.T.); +#260131 = LINE('',#260132,#260133); +#260132 = CARTESIAN_POINT('',(140.64165,-95.5731,1.56)); +#260133 = VECTOR('',#260134,1.); +#260134 = DIRECTION('',(1.,0.,0.)); +#260135 = FACE_BOUND('',#260136,.F.); +#260136 = EDGE_LOOP('',(#260137)); +#260137 = ORIENTED_EDGE('',*,*,#260138,.T.); +#260138 = EDGE_CURVE('',#260139,#260139,#260141,.T.); +#260139 = VERTEX_POINT('',#260140); +#260140 = CARTESIAN_POINT('',(210.654042,-92.8231,1.56)); +#260141 = CIRCLE('',#260142,0.462392); +#260142 = AXIS2_PLACEMENT_3D('',#260143,#260144,#260145); +#260143 = CARTESIAN_POINT('',(210.19165,-92.8231,1.56)); +#260144 = DIRECTION('',(0.,0.,1.)); +#260145 = DIRECTION('',(1.,0.,-0.)); +#260146 = FACE_BOUND('',#260147,.F.); +#260147 = EDGE_LOOP('',(#260148)); +#260148 = ORIENTED_EDGE('',*,*,#260149,.T.); +#260149 = EDGE_CURVE('',#260150,#260150,#260152,.T.); +#260150 = VERTEX_POINT('',#260151); +#260151 = CARTESIAN_POINT('',(174.579042,-92.8231,1.56)); +#260152 = CIRCLE('',#260153,0.387392); +#260153 = AXIS2_PLACEMENT_3D('',#260154,#260155,#260156); +#260154 = CARTESIAN_POINT('',(174.19165,-92.8231,1.56)); +#260155 = DIRECTION('',(0.,0.,1.)); +#260156 = DIRECTION('',(1.,0.,-0.)); +#260157 = FACE_BOUND('',#260158,.F.); +#260158 = EDGE_LOOP('',(#260159)); +#260159 = ORIENTED_EDGE('',*,*,#260160,.T.); +#260160 = EDGE_CURVE('',#260161,#260161,#260163,.T.); +#260161 = VERTEX_POINT('',#260162); +#260162 = CARTESIAN_POINT('',(196.929042,-92.8231,1.56)); +#260163 = CIRCLE('',#260164,0.387392); +#260164 = AXIS2_PLACEMENT_3D('',#260165,#260166,#260167); +#260165 = CARTESIAN_POINT('',(196.54165,-92.8231,1.56)); +#260166 = DIRECTION('',(0.,0.,1.)); +#260167 = DIRECTION('',(1.,0.,-0.)); +#260168 = FACE_BOUND('',#260169,.F.); +#260169 = EDGE_LOOP('',(#260170)); +#260170 = ORIENTED_EDGE('',*,*,#260171,.T.); +#260171 = EDGE_CURVE('',#260172,#260172,#260174,.T.); +#260172 = VERTEX_POINT('',#260173); +#260173 = CARTESIAN_POINT('',(174.579042,-90.8231,1.56)); +#260174 = CIRCLE('',#260175,0.387392); +#260175 = AXIS2_PLACEMENT_3D('',#260176,#260177,#260178); +#260176 = CARTESIAN_POINT('',(174.19165,-90.8231,1.56)); +#260177 = DIRECTION('',(0.,0.,1.)); +#260178 = DIRECTION('',(1.,0.,-0.)); +#260179 = FACE_BOUND('',#260180,.F.); +#260180 = EDGE_LOOP('',(#260181)); +#260181 = ORIENTED_EDGE('',*,*,#260182,.T.); +#260182 = EDGE_CURVE('',#260183,#260183,#260185,.T.); +#260183 = VERTEX_POINT('',#260184); +#260184 = CARTESIAN_POINT('',(196.929042,-90.8231,1.56)); +#260185 = CIRCLE('',#260186,0.387392); +#260186 = AXIS2_PLACEMENT_3D('',#260187,#260188,#260189); +#260187 = CARTESIAN_POINT('',(196.54165,-90.8231,1.56)); +#260188 = DIRECTION('',(0.,0.,1.)); +#260189 = DIRECTION('',(1.,0.,-0.)); +#260190 = FACE_BOUND('',#260191,.F.); +#260191 = EDGE_LOOP('',(#260192,#260202,#260210,#260218)); +#260192 = ORIENTED_EDGE('',*,*,#260193,.T.); +#260193 = EDGE_CURVE('',#260194,#260196,#260198,.T.); +#260194 = VERTEX_POINT('',#260195); +#260195 = CARTESIAN_POINT('',(142.14165,-91.0731,1.56)); +#260196 = VERTEX_POINT('',#260197); +#260197 = CARTESIAN_POINT('',(142.14165,-89.5731,1.56)); +#260198 = LINE('',#260199,#260200); +#260199 = CARTESIAN_POINT('',(142.14165,-91.0731,1.56)); +#260200 = VECTOR('',#260201,1.); +#260201 = DIRECTION('',(0.,1.,0.)); +#260202 = ORIENTED_EDGE('',*,*,#260203,.T.); +#260203 = EDGE_CURVE('',#260196,#260204,#260206,.T.); +#260204 = VERTEX_POINT('',#260205); +#260205 = CARTESIAN_POINT('',(140.64165,-89.5731,1.56)); +#260206 = LINE('',#260207,#260208); +#260207 = CARTESIAN_POINT('',(142.14165,-89.5731,1.56)); +#260208 = VECTOR('',#260209,1.); +#260209 = DIRECTION('',(-1.,0.,0.)); +#260210 = ORIENTED_EDGE('',*,*,#260211,.T.); +#260211 = EDGE_CURVE('',#260204,#260212,#260214,.T.); +#260212 = VERTEX_POINT('',#260213); +#260213 = CARTESIAN_POINT('',(140.64165,-91.0731,1.56)); +#260214 = LINE('',#260215,#260216); +#260215 = CARTESIAN_POINT('',(140.64165,-89.5731,1.56)); +#260216 = VECTOR('',#260217,1.); +#260217 = DIRECTION('',(0.,-1.,0.)); +#260218 = ORIENTED_EDGE('',*,*,#260219,.T.); +#260219 = EDGE_CURVE('',#260212,#260194,#260220,.T.); +#260220 = LINE('',#260221,#260222); +#260221 = CARTESIAN_POINT('',(140.64165,-91.0731,1.56)); +#260222 = VECTOR('',#260223,1.); +#260223 = DIRECTION('',(1.,0.,0.)); +#260224 = FACE_BOUND('',#260225,.F.); +#260225 = EDGE_LOOP('',(#260226)); +#260226 = ORIENTED_EDGE('',*,*,#260227,.T.); +#260227 = EDGE_CURVE('',#260228,#260228,#260230,.T.); +#260228 = VERTEX_POINT('',#260229); +#260229 = CARTESIAN_POINT('',(210.654042,-90.3231,1.56)); +#260230 = CIRCLE('',#260231,0.462392); +#260231 = AXIS2_PLACEMENT_3D('',#260232,#260233,#260234); +#260232 = CARTESIAN_POINT('',(210.19165,-90.3231,1.56)); +#260233 = DIRECTION('',(0.,0.,1.)); +#260234 = DIRECTION('',(1.,0.,-0.)); +#260235 = FACE_BOUND('',#260236,.F.); +#260236 = EDGE_LOOP('',(#260237)); +#260237 = ORIENTED_EDGE('',*,*,#260238,.T.); +#260238 = EDGE_CURVE('',#260239,#260239,#260241,.T.); +#260239 = VERTEX_POINT('',#260240); +#260240 = CARTESIAN_POINT('',(174.579042,-88.8231,1.56)); +#260241 = CIRCLE('',#260242,0.387392); +#260242 = AXIS2_PLACEMENT_3D('',#260243,#260244,#260245); +#260243 = CARTESIAN_POINT('',(174.19165,-88.8231,1.56)); +#260244 = DIRECTION('',(0.,0.,1.)); +#260245 = DIRECTION('',(1.,0.,-0.)); +#260246 = FACE_BOUND('',#260247,.F.); +#260247 = EDGE_LOOP('',(#260248)); +#260248 = ORIENTED_EDGE('',*,*,#260249,.T.); +#260249 = EDGE_CURVE('',#260250,#260250,#260252,.T.); +#260250 = VERTEX_POINT('',#260251); +#260251 = CARTESIAN_POINT('',(196.929042,-88.8231,1.56)); +#260252 = CIRCLE('',#260253,0.387392); +#260253 = AXIS2_PLACEMENT_3D('',#260254,#260255,#260256); +#260254 = CARTESIAN_POINT('',(196.54165,-88.8231,1.56)); +#260255 = DIRECTION('',(0.,0.,1.)); +#260256 = DIRECTION('',(1.,0.,-0.)); +#260257 = FACE_BOUND('',#260258,.F.); +#260258 = EDGE_LOOP('',(#260259)); +#260259 = ORIENTED_EDGE('',*,*,#260260,.T.); +#260260 = EDGE_CURVE('',#260261,#260261,#260263,.T.); +#260261 = VERTEX_POINT('',#260262); +#260262 = CARTESIAN_POINT('',(210.654042,-87.8231,1.56)); +#260263 = CIRCLE('',#260264,0.462392); +#260264 = AXIS2_PLACEMENT_3D('',#260265,#260266,#260267); +#260265 = CARTESIAN_POINT('',(210.19165,-87.8231,1.56)); +#260266 = DIRECTION('',(0.,0.,1.)); +#260267 = DIRECTION('',(1.,0.,-0.)); +#260268 = FACE_BOUND('',#260269,.F.); +#260269 = EDGE_LOOP('',(#260270)); +#260270 = ORIENTED_EDGE('',*,*,#260271,.T.); +#260271 = EDGE_CURVE('',#260272,#260272,#260274,.T.); +#260272 = VERTEX_POINT('',#260273); +#260273 = CARTESIAN_POINT('',(174.579042,-86.8231,1.56)); +#260274 = CIRCLE('',#260275,0.387392); +#260275 = AXIS2_PLACEMENT_3D('',#260276,#260277,#260278); +#260276 = CARTESIAN_POINT('',(174.19165,-86.8231,1.56)); +#260277 = DIRECTION('',(0.,0.,1.)); +#260278 = DIRECTION('',(1.,0.,-0.)); +#260279 = FACE_BOUND('',#260280,.F.); +#260280 = EDGE_LOOP('',(#260281)); +#260281 = ORIENTED_EDGE('',*,*,#260282,.T.); +#260282 = EDGE_CURVE('',#260283,#260283,#260285,.T.); +#260283 = VERTEX_POINT('',#260284); +#260284 = CARTESIAN_POINT('',(196.929042,-86.8231,1.56)); +#260285 = CIRCLE('',#260286,0.387392); +#260286 = AXIS2_PLACEMENT_3D('',#260287,#260288,#260289); +#260287 = CARTESIAN_POINT('',(196.54165,-86.8231,1.56)); +#260288 = DIRECTION('',(0.,0.,1.)); +#260289 = DIRECTION('',(1.,0.,-0.)); +#260290 = FACE_BOUND('',#260291,.F.); +#260291 = EDGE_LOOP('',(#260292)); +#260292 = ORIENTED_EDGE('',*,*,#260293,.T.); +#260293 = EDGE_CURVE('',#260294,#260294,#260296,.T.); +#260294 = VERTEX_POINT('',#260295); +#260295 = CARTESIAN_POINT('',(174.579042,-84.8231,1.56)); +#260296 = CIRCLE('',#260297,0.387392); +#260297 = AXIS2_PLACEMENT_3D('',#260298,#260299,#260300); +#260298 = CARTESIAN_POINT('',(174.19165,-84.8231,1.56)); +#260299 = DIRECTION('',(0.,0.,1.)); +#260300 = DIRECTION('',(1.,0.,-0.)); +#260301 = FACE_BOUND('',#260302,.F.); +#260302 = EDGE_LOOP('',(#260303)); +#260303 = ORIENTED_EDGE('',*,*,#260304,.T.); +#260304 = EDGE_CURVE('',#260305,#260305,#260307,.T.); +#260305 = VERTEX_POINT('',#260306); +#260306 = CARTESIAN_POINT('',(196.929042,-84.8231,1.56)); +#260307 = CIRCLE('',#260308,0.387392); +#260308 = AXIS2_PLACEMENT_3D('',#260309,#260310,#260311); +#260309 = CARTESIAN_POINT('',(196.54165,-84.8231,1.56)); +#260310 = DIRECTION('',(0.,0.,1.)); +#260311 = DIRECTION('',(1.,0.,-0.)); +#260312 = FACE_BOUND('',#260313,.F.); +#260313 = EDGE_LOOP('',(#260314)); +#260314 = ORIENTED_EDGE('',*,*,#260315,.T.); +#260315 = EDGE_CURVE('',#260316,#260316,#260318,.T.); +#260316 = VERTEX_POINT('',#260317); +#260317 = CARTESIAN_POINT('',(174.579042,-82.8231,1.56)); +#260318 = CIRCLE('',#260319,0.387392); +#260319 = AXIS2_PLACEMENT_3D('',#260320,#260321,#260322); +#260320 = CARTESIAN_POINT('',(174.19165,-82.8231,1.56)); +#260321 = DIRECTION('',(0.,0.,1.)); +#260322 = DIRECTION('',(1.,0.,-0.)); +#260323 = FACE_BOUND('',#260324,.F.); +#260324 = EDGE_LOOP('',(#260325)); +#260325 = ORIENTED_EDGE('',*,*,#260326,.T.); +#260326 = EDGE_CURVE('',#260327,#260327,#260329,.T.); +#260327 = VERTEX_POINT('',#260328); +#260328 = CARTESIAN_POINT('',(196.929042,-82.8231,1.56)); +#260329 = CIRCLE('',#260330,0.387392); +#260330 = AXIS2_PLACEMENT_3D('',#260331,#260332,#260333); +#260331 = CARTESIAN_POINT('',(196.54165,-82.8231,1.56)); +#260332 = DIRECTION('',(0.,0.,1.)); +#260333 = DIRECTION('',(1.,0.,-0.)); +#260334 = FACE_BOUND('',#260335,.F.); +#260335 = EDGE_LOOP('',(#260336)); +#260336 = ORIENTED_EDGE('',*,*,#260337,.T.); +#260337 = EDGE_CURVE('',#260338,#260338,#260340,.T.); +#260338 = VERTEX_POINT('',#260339); +#260339 = CARTESIAN_POINT('',(106.599042,-81.3231,1.56)); +#260340 = CIRCLE('',#260341,0.487392); +#260341 = AXIS2_PLACEMENT_3D('',#260342,#260343,#260344); +#260342 = CARTESIAN_POINT('',(106.11165,-81.3231,1.56)); +#260343 = DIRECTION('',(0.,0.,1.)); +#260344 = DIRECTION('',(1.,0.,-0.)); +#260345 = FACE_BOUND('',#260346,.F.); +#260346 = EDGE_LOOP('',(#260347)); +#260347 = ORIENTED_EDGE('',*,*,#260348,.T.); +#260348 = EDGE_CURVE('',#260349,#260349,#260351,.T.); +#260349 = VERTEX_POINT('',#260350); +#260350 = CARTESIAN_POINT('',(109.139042,-81.3231,1.56)); +#260351 = CIRCLE('',#260352,0.487392); +#260352 = AXIS2_PLACEMENT_3D('',#260353,#260354,#260355); +#260353 = CARTESIAN_POINT('',(108.65165,-81.3231,1.56)); +#260354 = DIRECTION('',(0.,0.,1.)); +#260355 = DIRECTION('',(1.,0.,-0.)); +#260356 = FACE_BOUND('',#260357,.F.); +#260357 = EDGE_LOOP('',(#260358)); +#260358 = ORIENTED_EDGE('',*,*,#260359,.T.); +#260359 = EDGE_CURVE('',#260360,#260360,#260362,.T.); +#260360 = VERTEX_POINT('',#260361); +#260361 = CARTESIAN_POINT('',(111.679042,-81.3231,1.56)); +#260362 = CIRCLE('',#260363,0.487392); +#260363 = AXIS2_PLACEMENT_3D('',#260364,#260365,#260366); +#260364 = CARTESIAN_POINT('',(111.19165,-81.3231,1.56)); +#260365 = DIRECTION('',(0.,0.,1.)); +#260366 = DIRECTION('',(1.,0.,-0.)); +#260367 = FACE_BOUND('',#260368,.F.); +#260368 = EDGE_LOOP('',(#260369)); +#260369 = ORIENTED_EDGE('',*,*,#260370,.T.); +#260370 = EDGE_CURVE('',#260371,#260371,#260373,.T.); +#260371 = VERTEX_POINT('',#260372); +#260372 = CARTESIAN_POINT('',(114.219042,-81.3231,1.56)); +#260373 = CIRCLE('',#260374,0.487392); +#260374 = AXIS2_PLACEMENT_3D('',#260375,#260376,#260377); +#260375 = CARTESIAN_POINT('',(113.73165,-81.3231,1.56)); +#260376 = DIRECTION('',(0.,0.,1.)); +#260377 = DIRECTION('',(1.,0.,-0.)); +#260378 = FACE_BOUND('',#260379,.F.); +#260379 = EDGE_LOOP('',(#260380)); +#260380 = ORIENTED_EDGE('',*,*,#260381,.T.); +#260381 = EDGE_CURVE('',#260382,#260382,#260384,.T.); +#260382 = VERTEX_POINT('',#260383); +#260383 = CARTESIAN_POINT('',(116.759042,-81.3231,1.56)); +#260384 = CIRCLE('',#260385,0.487392); +#260385 = AXIS2_PLACEMENT_3D('',#260386,#260387,#260388); +#260386 = CARTESIAN_POINT('',(116.27165,-81.3231,1.56)); +#260387 = DIRECTION('',(0.,0.,1.)); +#260388 = DIRECTION('',(1.,0.,-0.)); +#260389 = FACE_BOUND('',#260390,.F.); +#260390 = EDGE_LOOP('',(#260391)); +#260391 = ORIENTED_EDGE('',*,*,#260392,.T.); +#260392 = EDGE_CURVE('',#260393,#260393,#260395,.T.); +#260393 = VERTEX_POINT('',#260394); +#260394 = CARTESIAN_POINT('',(119.299042,-81.3231,1.56)); +#260395 = CIRCLE('',#260396,0.487392); +#260396 = AXIS2_PLACEMENT_3D('',#260397,#260398,#260399); +#260397 = CARTESIAN_POINT('',(118.81165,-81.3231,1.56)); +#260398 = DIRECTION('',(0.,0.,1.)); +#260399 = DIRECTION('',(1.,0.,-0.)); +#260400 = FACE_BOUND('',#260401,.F.); +#260401 = EDGE_LOOP('',(#260402)); +#260402 = ORIENTED_EDGE('',*,*,#260403,.T.); +#260403 = EDGE_CURVE('',#260404,#260404,#260406,.T.); +#260404 = VERTEX_POINT('',#260405); +#260405 = CARTESIAN_POINT('',(121.839042,-81.3231,1.56)); +#260406 = CIRCLE('',#260407,0.487392); +#260407 = AXIS2_PLACEMENT_3D('',#260408,#260409,#260410); +#260408 = CARTESIAN_POINT('',(121.35165,-81.3231,1.56)); +#260409 = DIRECTION('',(0.,0.,1.)); +#260410 = DIRECTION('',(1.,0.,-0.)); +#260411 = FACE_BOUND('',#260412,.F.); +#260412 = EDGE_LOOP('',(#260413)); +#260413 = ORIENTED_EDGE('',*,*,#260414,.T.); +#260414 = EDGE_CURVE('',#260415,#260415,#260417,.T.); +#260415 = VERTEX_POINT('',#260416); +#260416 = CARTESIAN_POINT('',(124.379042,-81.3231,1.56)); +#260417 = CIRCLE('',#260418,0.487392); +#260418 = AXIS2_PLACEMENT_3D('',#260419,#260420,#260421); +#260419 = CARTESIAN_POINT('',(123.89165,-81.3231,1.56)); +#260420 = DIRECTION('',(0.,0.,1.)); +#260421 = DIRECTION('',(1.,0.,-0.)); +#260422 = FACE_BOUND('',#260423,.F.); +#260423 = EDGE_LOOP('',(#260424)); +#260424 = ORIENTED_EDGE('',*,*,#260425,.T.); +#260425 = EDGE_CURVE('',#260426,#260426,#260428,.T.); +#260426 = VERTEX_POINT('',#260427); +#260427 = CARTESIAN_POINT('',(126.919042,-81.3231,1.56)); +#260428 = CIRCLE('',#260429,0.487392); +#260429 = AXIS2_PLACEMENT_3D('',#260430,#260431,#260432); +#260430 = CARTESIAN_POINT('',(126.43165,-81.3231,1.56)); +#260431 = DIRECTION('',(0.,0.,1.)); +#260432 = DIRECTION('',(1.,0.,-0.)); +#260433 = FACE_BOUND('',#260434,.F.); +#260434 = EDGE_LOOP('',(#260435)); +#260435 = ORIENTED_EDGE('',*,*,#260436,.T.); +#260436 = EDGE_CURVE('',#260437,#260437,#260439,.T.); +#260437 = VERTEX_POINT('',#260438); +#260438 = CARTESIAN_POINT('',(129.459042,-81.3231,1.56)); +#260439 = CIRCLE('',#260440,0.487392); +#260440 = AXIS2_PLACEMENT_3D('',#260441,#260442,#260443); +#260441 = CARTESIAN_POINT('',(128.97165,-81.3231,1.56)); +#260442 = DIRECTION('',(0.,0.,1.)); +#260443 = DIRECTION('',(1.,0.,-0.)); +#260444 = FACE_BOUND('',#260445,.F.); +#260445 = EDGE_LOOP('',(#260446)); +#260446 = ORIENTED_EDGE('',*,*,#260447,.T.); +#260447 = EDGE_CURVE('',#260448,#260448,#260450,.T.); +#260448 = VERTEX_POINT('',#260449); +#260449 = CARTESIAN_POINT('',(133.519042,-81.3231,1.56)); +#260450 = CIRCLE('',#260451,0.487392); +#260451 = AXIS2_PLACEMENT_3D('',#260452,#260453,#260454); +#260452 = CARTESIAN_POINT('',(133.03165,-81.3231,1.56)); +#260453 = DIRECTION('',(0.,0.,1.)); +#260454 = DIRECTION('',(1.,0.,-0.)); +#260455 = FACE_BOUND('',#260456,.F.); +#260456 = EDGE_LOOP('',(#260457)); +#260457 = ORIENTED_EDGE('',*,*,#260458,.T.); +#260458 = EDGE_CURVE('',#260459,#260459,#260461,.T.); +#260459 = VERTEX_POINT('',#260460); +#260460 = CARTESIAN_POINT('',(136.059042,-81.3231,1.56)); +#260461 = CIRCLE('',#260462,0.487392); +#260462 = AXIS2_PLACEMENT_3D('',#260463,#260464,#260465); +#260463 = CARTESIAN_POINT('',(135.57165,-81.3231,1.56)); +#260464 = DIRECTION('',(0.,0.,1.)); +#260465 = DIRECTION('',(1.,0.,-0.)); +#260466 = FACE_BOUND('',#260467,.F.); +#260467 = EDGE_LOOP('',(#260468)); +#260468 = ORIENTED_EDGE('',*,*,#260469,.T.); +#260469 = EDGE_CURVE('',#260470,#260470,#260472,.T.); +#260470 = VERTEX_POINT('',#260471); +#260471 = CARTESIAN_POINT('',(138.599042,-81.3231,1.56)); +#260472 = CIRCLE('',#260473,0.487392); +#260473 = AXIS2_PLACEMENT_3D('',#260474,#260475,#260476); +#260474 = CARTESIAN_POINT('',(138.11165,-81.3231,1.56)); +#260475 = DIRECTION('',(0.,0.,1.)); +#260476 = DIRECTION('',(1.,0.,-0.)); +#260477 = FACE_BOUND('',#260478,.F.); +#260478 = EDGE_LOOP('',(#260479)); +#260479 = ORIENTED_EDGE('',*,*,#260480,.T.); +#260480 = EDGE_CURVE('',#260481,#260481,#260483,.T.); +#260481 = VERTEX_POINT('',#260482); +#260482 = CARTESIAN_POINT('',(141.139042,-81.3231,1.56)); +#260483 = CIRCLE('',#260484,0.487392); +#260484 = AXIS2_PLACEMENT_3D('',#260485,#260486,#260487); +#260485 = CARTESIAN_POINT('',(140.65165,-81.3231,1.56)); +#260486 = DIRECTION('',(0.,0.,1.)); +#260487 = DIRECTION('',(1.,0.,-0.)); +#260488 = FACE_BOUND('',#260489,.F.); +#260489 = EDGE_LOOP('',(#260490)); +#260490 = ORIENTED_EDGE('',*,*,#260491,.T.); +#260491 = EDGE_CURVE('',#260492,#260492,#260494,.T.); +#260492 = VERTEX_POINT('',#260493); +#260493 = CARTESIAN_POINT('',(143.679042,-81.3231,1.56)); +#260494 = CIRCLE('',#260495,0.487392); +#260495 = AXIS2_PLACEMENT_3D('',#260496,#260497,#260498); +#260496 = CARTESIAN_POINT('',(143.19165,-81.3231,1.56)); +#260497 = DIRECTION('',(0.,0.,1.)); +#260498 = DIRECTION('',(1.,0.,-0.)); +#260499 = FACE_BOUND('',#260500,.F.); +#260500 = EDGE_LOOP('',(#260501)); +#260501 = ORIENTED_EDGE('',*,*,#260502,.T.); +#260502 = EDGE_CURVE('',#260503,#260503,#260505,.T.); +#260503 = VERTEX_POINT('',#260504); +#260504 = CARTESIAN_POINT('',(146.219042,-81.3231,1.56)); +#260505 = CIRCLE('',#260506,0.487392); +#260506 = AXIS2_PLACEMENT_3D('',#260507,#260508,#260509); +#260507 = CARTESIAN_POINT('',(145.73165,-81.3231,1.56)); +#260508 = DIRECTION('',(0.,0.,1.)); +#260509 = DIRECTION('',(1.,0.,-0.)); +#260510 = FACE_BOUND('',#260511,.F.); +#260511 = EDGE_LOOP('',(#260512)); +#260512 = ORIENTED_EDGE('',*,*,#260513,.T.); +#260513 = EDGE_CURVE('',#260514,#260514,#260516,.T.); +#260514 = VERTEX_POINT('',#260515); +#260515 = CARTESIAN_POINT('',(148.759042,-81.3231,1.56)); +#260516 = CIRCLE('',#260517,0.487392); +#260517 = AXIS2_PLACEMENT_3D('',#260518,#260519,#260520); +#260518 = CARTESIAN_POINT('',(148.27165,-81.3231,1.56)); +#260519 = DIRECTION('',(0.,0.,1.)); +#260520 = DIRECTION('',(1.,0.,-0.)); +#260521 = FACE_BOUND('',#260522,.F.); +#260522 = EDGE_LOOP('',(#260523)); +#260523 = ORIENTED_EDGE('',*,*,#260524,.T.); +#260524 = EDGE_CURVE('',#260525,#260525,#260527,.T.); +#260525 = VERTEX_POINT('',#260526); +#260526 = CARTESIAN_POINT('',(151.299042,-81.3231,1.56)); +#260527 = CIRCLE('',#260528,0.487392); +#260528 = AXIS2_PLACEMENT_3D('',#260529,#260530,#260531); +#260529 = CARTESIAN_POINT('',(150.81165,-81.3231,1.56)); +#260530 = DIRECTION('',(0.,0.,1.)); +#260531 = DIRECTION('',(1.,0.,-0.)); +#260532 = FACE_BOUND('',#260533,.F.); +#260533 = EDGE_LOOP('',(#260534)); +#260534 = ORIENTED_EDGE('',*,*,#260535,.T.); +#260535 = EDGE_CURVE('',#260536,#260536,#260538,.T.); +#260536 = VERTEX_POINT('',#260537); +#260537 = CARTESIAN_POINT('',(174.579042,-80.8231,1.56)); +#260538 = CIRCLE('',#260539,0.387392); +#260539 = AXIS2_PLACEMENT_3D('',#260540,#260541,#260542); +#260540 = CARTESIAN_POINT('',(174.19165,-80.8231,1.56)); +#260541 = DIRECTION('',(0.,0.,1.)); +#260542 = DIRECTION('',(1.,0.,-0.)); +#260543 = FACE_BOUND('',#260544,.F.); +#260544 = EDGE_LOOP('',(#260545)); +#260545 = ORIENTED_EDGE('',*,*,#260546,.T.); +#260546 = EDGE_CURVE('',#260547,#260547,#260549,.T.); +#260547 = VERTEX_POINT('',#260548); +#260548 = CARTESIAN_POINT('',(196.929042,-80.8231,1.56)); +#260549 = CIRCLE('',#260550,0.387392); +#260550 = AXIS2_PLACEMENT_3D('',#260551,#260552,#260553); +#260551 = CARTESIAN_POINT('',(196.54165,-80.8231,1.56)); +#260552 = DIRECTION('',(0.,0.,1.)); +#260553 = DIRECTION('',(1.,0.,-0.)); +#260554 = FACE_BOUND('',#260555,.F.); +#260555 = EDGE_LOOP('',(#260556,#260566,#260574,#260582)); +#260556 = ORIENTED_EDGE('',*,*,#260557,.T.); +#260557 = EDGE_CURVE('',#260558,#260560,#260562,.T.); +#260558 = VERTEX_POINT('',#260559); +#260559 = CARTESIAN_POINT('',(165.69165,-81.0731,1.56)); +#260560 = VERTEX_POINT('',#260561); +#260561 = CARTESIAN_POINT('',(165.69165,-79.5731,1.56)); +#260562 = LINE('',#260563,#260564); +#260563 = CARTESIAN_POINT('',(165.69165,-81.0731,1.56)); +#260564 = VECTOR('',#260565,1.); +#260565 = DIRECTION('',(0.,1.,0.)); +#260566 = ORIENTED_EDGE('',*,*,#260567,.T.); +#260567 = EDGE_CURVE('',#260560,#260568,#260570,.T.); +#260568 = VERTEX_POINT('',#260569); +#260569 = CARTESIAN_POINT('',(165.39165,-79.5731,1.56)); +#260570 = LINE('',#260571,#260572); +#260571 = CARTESIAN_POINT('',(165.69165,-79.5731,1.56)); +#260572 = VECTOR('',#260573,1.); +#260573 = DIRECTION('',(-1.,0.,0.)); +#260574 = ORIENTED_EDGE('',*,*,#260575,.T.); +#260575 = EDGE_CURVE('',#260568,#260576,#260578,.T.); +#260576 = VERTEX_POINT('',#260577); +#260577 = CARTESIAN_POINT('',(165.39165,-81.0731,1.56)); +#260578 = LINE('',#260579,#260580); +#260579 = CARTESIAN_POINT('',(165.39165,-79.5731,1.56)); +#260580 = VECTOR('',#260581,1.); +#260581 = DIRECTION('',(0.,-1.,0.)); +#260582 = ORIENTED_EDGE('',*,*,#260583,.T.); +#260583 = EDGE_CURVE('',#260576,#260558,#260584,.T.); +#260584 = LINE('',#260585,#260586); +#260585 = CARTESIAN_POINT('',(165.39165,-81.0731,1.56)); +#260586 = VECTOR('',#260587,1.); +#260587 = DIRECTION('',(1.,0.,0.)); +#260588 = FACE_BOUND('',#260589,.F.); +#260589 = EDGE_LOOP('',(#260590)); +#260590 = ORIENTED_EDGE('',*,*,#260591,.T.); +#260591 = EDGE_CURVE('',#260592,#260592,#260594,.T.); +#260592 = VERTEX_POINT('',#260593); +#260593 = CARTESIAN_POINT('',(210.654042,-80.0731,1.56)); +#260594 = CIRCLE('',#260595,0.487392); +#260595 = AXIS2_PLACEMENT_3D('',#260596,#260597,#260598); +#260596 = CARTESIAN_POINT('',(210.16665,-80.0731,1.56)); +#260597 = DIRECTION('',(0.,0.,1.)); +#260598 = DIRECTION('',(1.,0.,-0.)); +#260599 = FACE_BOUND('',#260600,.F.); +#260600 = EDGE_LOOP('',(#260601)); +#260601 = ORIENTED_EDGE('',*,*,#260602,.T.); +#260602 = EDGE_CURVE('',#260603,#260603,#260605,.T.); +#260603 = VERTEX_POINT('',#260604); +#260604 = CARTESIAN_POINT('',(174.579042,-78.8231,1.56)); +#260605 = CIRCLE('',#260606,0.387392); +#260606 = AXIS2_PLACEMENT_3D('',#260607,#260608,#260609); +#260607 = CARTESIAN_POINT('',(174.19165,-78.8231,1.56)); +#260608 = DIRECTION('',(0.,0.,1.)); +#260609 = DIRECTION('',(1.,0.,-0.)); +#260610 = FACE_BOUND('',#260611,.F.); +#260611 = EDGE_LOOP('',(#260612)); +#260612 = ORIENTED_EDGE('',*,*,#260613,.T.); +#260613 = EDGE_CURVE('',#260614,#260614,#260616,.T.); +#260614 = VERTEX_POINT('',#260615); +#260615 = CARTESIAN_POINT('',(196.929042,-78.8231,1.56)); +#260616 = CIRCLE('',#260617,0.387392); +#260617 = AXIS2_PLACEMENT_3D('',#260618,#260619,#260620); +#260618 = CARTESIAN_POINT('',(196.54165,-78.8231,1.56)); +#260619 = DIRECTION('',(0.,0.,1.)); +#260620 = DIRECTION('',(1.,0.,-0.)); +#260621 = FACE_BOUND('',#260622,.F.); +#260622 = EDGE_LOOP('',(#260623)); +#260623 = ORIENTED_EDGE('',*,*,#260624,.T.); +#260624 = EDGE_CURVE('',#260625,#260625,#260627,.T.); +#260625 = VERTEX_POINT('',#260626); +#260626 = CARTESIAN_POINT('',(210.654042,-77.5731,1.56)); +#260627 = CIRCLE('',#260628,0.487392); +#260628 = AXIS2_PLACEMENT_3D('',#260629,#260630,#260631); +#260629 = CARTESIAN_POINT('',(210.16665,-77.5731,1.56)); +#260630 = DIRECTION('',(0.,0.,1.)); +#260631 = DIRECTION('',(1.,0.,-0.)); +#260632 = FACE_BOUND('',#260633,.F.); +#260633 = EDGE_LOOP('',(#260634)); +#260634 = ORIENTED_EDGE('',*,*,#260635,.T.); +#260635 = EDGE_CURVE('',#260636,#260636,#260638,.T.); +#260636 = VERTEX_POINT('',#260637); +#260637 = CARTESIAN_POINT('',(174.579042,-76.8231,1.56)); +#260638 = CIRCLE('',#260639,0.387392); +#260639 = AXIS2_PLACEMENT_3D('',#260640,#260641,#260642); +#260640 = CARTESIAN_POINT('',(174.19165,-76.8231,1.56)); +#260641 = DIRECTION('',(0.,0.,1.)); +#260642 = DIRECTION('',(1.,0.,-0.)); +#260643 = FACE_BOUND('',#260644,.F.); +#260644 = EDGE_LOOP('',(#260645)); +#260645 = ORIENTED_EDGE('',*,*,#260646,.T.); +#260646 = EDGE_CURVE('',#260647,#260647,#260649,.T.); +#260647 = VERTEX_POINT('',#260648); +#260648 = CARTESIAN_POINT('',(196.929042,-76.8231,1.56)); +#260649 = CIRCLE('',#260650,0.387392); +#260650 = AXIS2_PLACEMENT_3D('',#260651,#260652,#260653); +#260651 = CARTESIAN_POINT('',(196.54165,-76.8231,1.56)); +#260652 = DIRECTION('',(0.,0.,1.)); +#260653 = DIRECTION('',(1.,0.,-0.)); +#260654 = FACE_BOUND('',#260655,.F.); +#260655 = EDGE_LOOP('',(#260656)); +#260656 = ORIENTED_EDGE('',*,*,#260657,.T.); +#260657 = EDGE_CURVE('',#260658,#260658,#260660,.T.); +#260658 = VERTEX_POINT('',#260659); +#260659 = CARTESIAN_POINT('',(174.579042,-74.8231,1.56)); +#260660 = CIRCLE('',#260661,0.387392); +#260661 = AXIS2_PLACEMENT_3D('',#260662,#260663,#260664); +#260662 = CARTESIAN_POINT('',(174.19165,-74.8231,1.56)); +#260663 = DIRECTION('',(0.,0.,1.)); +#260664 = DIRECTION('',(1.,0.,-0.)); +#260665 = FACE_BOUND('',#260666,.F.); +#260666 = EDGE_LOOP('',(#260667)); +#260667 = ORIENTED_EDGE('',*,*,#260668,.T.); +#260668 = EDGE_CURVE('',#260669,#260669,#260671,.T.); +#260669 = VERTEX_POINT('',#260670); +#260670 = CARTESIAN_POINT('',(196.929042,-74.8231,1.56)); +#260671 = CIRCLE('',#260672,0.387392); +#260672 = AXIS2_PLACEMENT_3D('',#260673,#260674,#260675); +#260673 = CARTESIAN_POINT('',(196.54165,-74.8231,1.56)); +#260674 = DIRECTION('',(0.,0.,1.)); +#260675 = DIRECTION('',(1.,0.,-0.)); +#260676 = FACE_BOUND('',#260677,.F.); +#260677 = EDGE_LOOP('',(#260678)); +#260678 = ORIENTED_EDGE('',*,*,#260679,.T.); +#260679 = EDGE_CURVE('',#260680,#260680,#260682,.T.); +#260680 = VERTEX_POINT('',#260681); +#260681 = CARTESIAN_POINT('',(107.679042,-74.1031,1.56)); +#260682 = CIRCLE('',#260683,0.487392); +#260683 = AXIS2_PLACEMENT_3D('',#260684,#260685,#260686); +#260684 = CARTESIAN_POINT('',(107.19165,-74.1031,1.56)); +#260685 = DIRECTION('',(0.,0.,1.)); +#260686 = DIRECTION('',(1.,0.,-0.)); +#260687 = FACE_BOUND('',#260688,.F.); +#260688 = EDGE_LOOP('',(#260689)); +#260689 = ORIENTED_EDGE('',*,*,#260690,.T.); +#260690 = EDGE_CURVE('',#260691,#260691,#260693,.T.); +#260691 = VERTEX_POINT('',#260692); +#260692 = CARTESIAN_POINT('',(110.219042,-74.1031,1.56)); +#260693 = CIRCLE('',#260694,0.487392); +#260694 = AXIS2_PLACEMENT_3D('',#260695,#260696,#260697); +#260695 = CARTESIAN_POINT('',(109.73165,-74.1031,1.56)); +#260696 = DIRECTION('',(0.,0.,1.)); +#260697 = DIRECTION('',(1.,0.,-0.)); +#260698 = FACE_BOUND('',#260699,.F.); +#260699 = EDGE_LOOP('',(#260700)); +#260700 = ORIENTED_EDGE('',*,*,#260701,.T.); +#260701 = EDGE_CURVE('',#260702,#260702,#260704,.T.); +#260702 = VERTEX_POINT('',#260703); +#260703 = CARTESIAN_POINT('',(112.759042,-74.1031,1.56)); +#260704 = CIRCLE('',#260705,0.487392); +#260705 = AXIS2_PLACEMENT_3D('',#260706,#260707,#260708); +#260706 = CARTESIAN_POINT('',(112.27165,-74.1031,1.56)); +#260707 = DIRECTION('',(0.,0.,1.)); +#260708 = DIRECTION('',(1.,0.,-0.)); +#260709 = FACE_BOUND('',#260710,.F.); +#260710 = EDGE_LOOP('',(#260711)); +#260711 = ORIENTED_EDGE('',*,*,#260712,.T.); +#260712 = EDGE_CURVE('',#260713,#260713,#260715,.T.); +#260713 = VERTEX_POINT('',#260714); +#260714 = CARTESIAN_POINT('',(115.299042,-74.1031,1.56)); +#260715 = CIRCLE('',#260716,0.487392); +#260716 = AXIS2_PLACEMENT_3D('',#260717,#260718,#260719); +#260717 = CARTESIAN_POINT('',(114.81165,-74.1031,1.56)); +#260718 = DIRECTION('',(0.,0.,1.)); +#260719 = DIRECTION('',(1.,0.,-0.)); +#260720 = FACE_BOUND('',#260721,.F.); +#260721 = EDGE_LOOP('',(#260722)); +#260722 = ORIENTED_EDGE('',*,*,#260723,.T.); +#260723 = EDGE_CURVE('',#260724,#260724,#260726,.T.); +#260724 = VERTEX_POINT('',#260725); +#260725 = CARTESIAN_POINT('',(117.839042,-74.1031,1.56)); +#260726 = CIRCLE('',#260727,0.487392); +#260727 = AXIS2_PLACEMENT_3D('',#260728,#260729,#260730); +#260728 = CARTESIAN_POINT('',(117.35165,-74.1031,1.56)); +#260729 = DIRECTION('',(0.,0.,1.)); +#260730 = DIRECTION('',(1.,0.,-0.)); +#260731 = FACE_BOUND('',#260732,.F.); +#260732 = EDGE_LOOP('',(#260733)); +#260733 = ORIENTED_EDGE('',*,*,#260734,.T.); +#260734 = EDGE_CURVE('',#260735,#260735,#260737,.T.); +#260735 = VERTEX_POINT('',#260736); +#260736 = CARTESIAN_POINT('',(120.379042,-74.1031,1.56)); +#260737 = CIRCLE('',#260738,0.487392); +#260738 = AXIS2_PLACEMENT_3D('',#260739,#260740,#260741); +#260739 = CARTESIAN_POINT('',(119.89165,-74.1031,1.56)); +#260740 = DIRECTION('',(0.,0.,1.)); +#260741 = DIRECTION('',(1.,0.,-0.)); +#260742 = FACE_BOUND('',#260743,.F.); +#260743 = EDGE_LOOP('',(#260744)); +#260744 = ORIENTED_EDGE('',*,*,#260745,.T.); +#260745 = EDGE_CURVE('',#260746,#260746,#260748,.T.); +#260746 = VERTEX_POINT('',#260747); +#260747 = CARTESIAN_POINT('',(122.919042,-74.1031,1.56)); +#260748 = CIRCLE('',#260749,0.487392); +#260749 = AXIS2_PLACEMENT_3D('',#260750,#260751,#260752); +#260750 = CARTESIAN_POINT('',(122.43165,-74.1031,1.56)); +#260751 = DIRECTION('',(0.,0.,1.)); +#260752 = DIRECTION('',(1.,0.,-0.)); +#260753 = FACE_BOUND('',#260754,.F.); +#260754 = EDGE_LOOP('',(#260755)); +#260755 = ORIENTED_EDGE('',*,*,#260756,.T.); +#260756 = EDGE_CURVE('',#260757,#260757,#260759,.T.); +#260757 = VERTEX_POINT('',#260758); +#260758 = CARTESIAN_POINT('',(125.459042,-74.1031,1.56)); +#260759 = CIRCLE('',#260760,0.487392); +#260760 = AXIS2_PLACEMENT_3D('',#260761,#260762,#260763); +#260761 = CARTESIAN_POINT('',(124.97165,-74.1031,1.56)); +#260762 = DIRECTION('',(0.,0.,1.)); +#260763 = DIRECTION('',(1.,0.,-0.)); +#260764 = FACE_BOUND('',#260765,.F.); +#260765 = EDGE_LOOP('',(#260766)); +#260766 = ORIENTED_EDGE('',*,*,#260767,.T.); +#260767 = EDGE_CURVE('',#260768,#260768,#260770,.T.); +#260768 = VERTEX_POINT('',#260769); +#260769 = CARTESIAN_POINT('',(127.999042,-74.1031,1.56)); +#260770 = CIRCLE('',#260771,0.487392); +#260771 = AXIS2_PLACEMENT_3D('',#260772,#260773,#260774); +#260772 = CARTESIAN_POINT('',(127.51165,-74.1031,1.56)); +#260773 = DIRECTION('',(0.,0.,1.)); +#260774 = DIRECTION('',(1.,0.,-0.)); +#260775 = FACE_BOUND('',#260776,.F.); +#260776 = EDGE_LOOP('',(#260777)); +#260777 = ORIENTED_EDGE('',*,*,#260778,.T.); +#260778 = EDGE_CURVE('',#260779,#260779,#260781,.T.); +#260779 = VERTEX_POINT('',#260780); +#260780 = CARTESIAN_POINT('',(130.539042,-74.1031,1.56)); +#260781 = CIRCLE('',#260782,0.487392); +#260782 = AXIS2_PLACEMENT_3D('',#260783,#260784,#260785); +#260783 = CARTESIAN_POINT('',(130.05165,-74.1031,1.56)); +#260784 = DIRECTION('',(0.,0.,1.)); +#260785 = DIRECTION('',(1.,0.,-0.)); +#260786 = FACE_BOUND('',#260787,.F.); +#260787 = EDGE_LOOP('',(#260788)); +#260788 = ORIENTED_EDGE('',*,*,#260789,.T.); +#260789 = EDGE_CURVE('',#260790,#260790,#260792,.T.); +#260790 = VERTEX_POINT('',#260791); +#260791 = CARTESIAN_POINT('',(133.079042,-74.1031,1.56)); +#260792 = CIRCLE('',#260793,0.487392); +#260793 = AXIS2_PLACEMENT_3D('',#260794,#260795,#260796); +#260794 = CARTESIAN_POINT('',(132.59165,-74.1031,1.56)); +#260795 = DIRECTION('',(0.,0.,1.)); +#260796 = DIRECTION('',(1.,0.,-0.)); +#260797 = FACE_BOUND('',#260798,.F.); +#260798 = EDGE_LOOP('',(#260799)); +#260799 = ORIENTED_EDGE('',*,*,#260800,.T.); +#260800 = EDGE_CURVE('',#260801,#260801,#260803,.T.); +#260801 = VERTEX_POINT('',#260802); +#260802 = CARTESIAN_POINT('',(135.619042,-74.1031,1.56)); +#260803 = CIRCLE('',#260804,0.487392); +#260804 = AXIS2_PLACEMENT_3D('',#260805,#260806,#260807); +#260805 = CARTESIAN_POINT('',(135.13165,-74.1031,1.56)); +#260806 = DIRECTION('',(0.,0.,1.)); +#260807 = DIRECTION('',(1.,0.,-0.)); +#260808 = FACE_BOUND('',#260809,.F.); +#260809 = EDGE_LOOP('',(#260810)); +#260810 = ORIENTED_EDGE('',*,*,#260811,.T.); +#260811 = EDGE_CURVE('',#260812,#260812,#260814,.T.); +#260812 = VERTEX_POINT('',#260813); +#260813 = CARTESIAN_POINT('',(138.159042,-74.1031,1.56)); +#260814 = CIRCLE('',#260815,0.487392); +#260815 = AXIS2_PLACEMENT_3D('',#260816,#260817,#260818); +#260816 = CARTESIAN_POINT('',(137.67165,-74.1031,1.56)); +#260817 = DIRECTION('',(0.,0.,1.)); +#260818 = DIRECTION('',(1.,0.,-0.)); +#260819 = FACE_BOUND('',#260820,.F.); +#260820 = EDGE_LOOP('',(#260821)); +#260821 = ORIENTED_EDGE('',*,*,#260822,.T.); +#260822 = EDGE_CURVE('',#260823,#260823,#260825,.T.); +#260823 = VERTEX_POINT('',#260824); +#260824 = CARTESIAN_POINT('',(140.699042,-74.1031,1.56)); +#260825 = CIRCLE('',#260826,0.487392); +#260826 = AXIS2_PLACEMENT_3D('',#260827,#260828,#260829); +#260827 = CARTESIAN_POINT('',(140.21165,-74.1031,1.56)); +#260828 = DIRECTION('',(0.,0.,1.)); +#260829 = DIRECTION('',(1.,0.,-0.)); +#260830 = FACE_BOUND('',#260831,.F.); +#260831 = EDGE_LOOP('',(#260832)); +#260832 = ORIENTED_EDGE('',*,*,#260833,.T.); +#260833 = EDGE_CURVE('',#260834,#260834,#260836,.T.); +#260834 = VERTEX_POINT('',#260835); +#260835 = CARTESIAN_POINT('',(143.239042,-74.1031,1.56)); +#260836 = CIRCLE('',#260837,0.487392); +#260837 = AXIS2_PLACEMENT_3D('',#260838,#260839,#260840); +#260838 = CARTESIAN_POINT('',(142.75165,-74.1031,1.56)); +#260839 = DIRECTION('',(0.,0.,1.)); +#260840 = DIRECTION('',(1.,0.,-0.)); +#260841 = FACE_BOUND('',#260842,.F.); +#260842 = EDGE_LOOP('',(#260843)); +#260843 = ORIENTED_EDGE('',*,*,#260844,.T.); +#260844 = EDGE_CURVE('',#260845,#260845,#260847,.T.); +#260845 = VERTEX_POINT('',#260846); +#260846 = CARTESIAN_POINT('',(145.779042,-74.1031,1.56)); +#260847 = CIRCLE('',#260848,0.487392); +#260848 = AXIS2_PLACEMENT_3D('',#260849,#260850,#260851); +#260849 = CARTESIAN_POINT('',(145.29165,-74.1031,1.56)); +#260850 = DIRECTION('',(0.,0.,1.)); +#260851 = DIRECTION('',(1.,0.,-0.)); +#260852 = FACE_BOUND('',#260853,.F.); +#260853 = EDGE_LOOP('',(#260854)); +#260854 = ORIENTED_EDGE('',*,*,#260855,.T.); +#260855 = EDGE_CURVE('',#260856,#260856,#260858,.T.); +#260856 = VERTEX_POINT('',#260857); +#260857 = CARTESIAN_POINT('',(148.319042,-74.1031,1.56)); +#260858 = CIRCLE('',#260859,0.487392); +#260859 = AXIS2_PLACEMENT_3D('',#260860,#260861,#260862); +#260860 = CARTESIAN_POINT('',(147.83165,-74.1031,1.56)); +#260861 = DIRECTION('',(0.,0.,1.)); +#260862 = DIRECTION('',(1.,0.,-0.)); +#260863 = FACE_BOUND('',#260864,.F.); +#260864 = EDGE_LOOP('',(#260865)); +#260865 = ORIENTED_EDGE('',*,*,#260866,.T.); +#260866 = EDGE_CURVE('',#260867,#260867,#260869,.T.); +#260867 = VERTEX_POINT('',#260868); +#260868 = CARTESIAN_POINT('',(150.859042,-74.1031,1.56)); +#260869 = CIRCLE('',#260870,0.487392); +#260870 = AXIS2_PLACEMENT_3D('',#260871,#260872,#260873); +#260871 = CARTESIAN_POINT('',(150.37165,-74.1031,1.56)); +#260872 = DIRECTION('',(0.,0.,1.)); +#260873 = DIRECTION('',(1.,0.,-0.)); +#260874 = FACE_BOUND('',#260875,.F.); +#260875 = EDGE_LOOP('',(#260876)); +#260876 = ORIENTED_EDGE('',*,*,#260877,.T.); +#260877 = EDGE_CURVE('',#260878,#260878,#260880,.T.); +#260878 = VERTEX_POINT('',#260879); +#260879 = CARTESIAN_POINT('',(153.399042,-74.1031,1.56)); +#260880 = CIRCLE('',#260881,0.487392); +#260881 = AXIS2_PLACEMENT_3D('',#260882,#260883,#260884); +#260882 = CARTESIAN_POINT('',(152.91165,-74.1031,1.56)); +#260883 = DIRECTION('',(0.,0.,1.)); +#260884 = DIRECTION('',(1.,0.,-0.)); +#260885 = FACE_BOUND('',#260886,.F.); +#260886 = EDGE_LOOP('',(#260887)); +#260887 = ORIENTED_EDGE('',*,*,#260888,.T.); +#260888 = EDGE_CURVE('',#260889,#260889,#260891,.T.); +#260889 = VERTEX_POINT('',#260890); +#260890 = CARTESIAN_POINT('',(155.939042,-74.1031,1.56)); +#260891 = CIRCLE('',#260892,0.487392); +#260892 = AXIS2_PLACEMENT_3D('',#260893,#260894,#260895); +#260893 = CARTESIAN_POINT('',(155.45165,-74.1031,1.56)); +#260894 = DIRECTION('',(0.,0.,1.)); +#260895 = DIRECTION('',(1.,0.,-0.)); +#260896 = FACE_BOUND('',#260897,.F.); +#260897 = EDGE_LOOP('',(#260898)); +#260898 = ORIENTED_EDGE('',*,*,#260899,.T.); +#260899 = EDGE_CURVE('',#260900,#260900,#260902,.T.); +#260900 = VERTEX_POINT('',#260901); +#260901 = CARTESIAN_POINT('',(210.654042,-70.8231,1.56)); +#260902 = CIRCLE('',#260903,0.487392); +#260903 = AXIS2_PLACEMENT_3D('',#260904,#260905,#260906); +#260904 = CARTESIAN_POINT('',(210.16665,-70.8231,1.56)); +#260905 = DIRECTION('',(0.,0.,1.)); +#260906 = DIRECTION('',(1.,0.,-0.)); +#260907 = FACE_BOUND('',#260908,.F.); +#260908 = EDGE_LOOP('',(#260909)); +#260909 = ORIENTED_EDGE('',*,*,#260910,.T.); +#260910 = EDGE_CURVE('',#260911,#260911,#260913,.T.); +#260911 = VERTEX_POINT('',#260912); +#260912 = CARTESIAN_POINT('',(210.654042,-68.3231,1.56)); +#260913 = CIRCLE('',#260914,0.487392); +#260914 = AXIS2_PLACEMENT_3D('',#260915,#260916,#260917); +#260915 = CARTESIAN_POINT('',(210.16665,-68.3231,1.56)); +#260916 = DIRECTION('',(0.,0.,1.)); +#260917 = DIRECTION('',(1.,0.,-0.)); +#260918 = FACE_BOUND('',#260919,.F.); +#260919 = EDGE_LOOP('',(#260920)); +#260920 = ORIENTED_EDGE('',*,*,#260921,.T.); +#260921 = EDGE_CURVE('',#260922,#260922,#260924,.T.); +#260922 = VERTEX_POINT('',#260923); +#260923 = CARTESIAN_POINT('',(189.771542,-66.0256,1.56)); +#260924 = CIRCLE('',#260925,0.487392); +#260925 = AXIS2_PLACEMENT_3D('',#260926,#260927,#260928); +#260926 = CARTESIAN_POINT('',(189.28415,-66.0256,1.56)); +#260927 = DIRECTION('',(0.,0.,1.)); +#260928 = DIRECTION('',(1.,0.,-0.)); +#260929 = FACE_BOUND('',#260930,.F.); +#260930 = EDGE_LOOP('',(#260931)); +#260931 = ORIENTED_EDGE('',*,*,#260932,.T.); +#260932 = EDGE_CURVE('',#260933,#260933,#260935,.T.); +#260933 = VERTEX_POINT('',#260934); +#260934 = CARTESIAN_POINT('',(194.851542,-66.0256,1.56)); +#260935 = CIRCLE('',#260936,0.487392); +#260936 = AXIS2_PLACEMENT_3D('',#260937,#260938,#260939); +#260937 = CARTESIAN_POINT('',(194.36415,-66.0256,1.56)); +#260938 = DIRECTION('',(0.,0.,1.)); +#260939 = DIRECTION('',(1.,0.,-0.)); +#260940 = FACE_BOUND('',#260941,.F.); +#260941 = EDGE_LOOP('',(#260942)); +#260942 = ORIENTED_EDGE('',*,*,#260943,.T.); +#260943 = EDGE_CURVE('',#260944,#260944,#260946,.T.); +#260944 = VERTEX_POINT('',#260945); +#260945 = CARTESIAN_POINT('',(210.654042,-61.8231,1.56)); +#260946 = CIRCLE('',#260947,0.462392); +#260947 = AXIS2_PLACEMENT_3D('',#260948,#260949,#260950); +#260948 = CARTESIAN_POINT('',(210.19165,-61.8231,1.56)); +#260949 = DIRECTION('',(0.,0.,1.)); +#260950 = DIRECTION('',(1.,0.,-0.)); +#260951 = FACE_BOUND('',#260952,.F.); +#260952 = EDGE_LOOP('',(#260953)); +#260953 = ORIENTED_EDGE('',*,*,#260954,.T.); +#260954 = EDGE_CURVE('',#260955,#260955,#260957,.T.); +#260955 = VERTEX_POINT('',#260956); +#260956 = CARTESIAN_POINT('',(210.654042,-59.3231,1.56)); +#260957 = CIRCLE('',#260958,0.462392); +#260958 = AXIS2_PLACEMENT_3D('',#260959,#260960,#260961); +#260959 = CARTESIAN_POINT('',(210.19165,-59.3231,1.56)); +#260960 = DIRECTION('',(0.,0.,1.)); +#260961 = DIRECTION('',(1.,0.,-0.)); +#260962 = FACE_BOUND('',#260963,.F.); +#260963 = EDGE_LOOP('',(#260964)); +#260964 = ORIENTED_EDGE('',*,*,#260965,.T.); +#260965 = EDGE_CURVE('',#260966,#260966,#260968,.T.); +#260966 = VERTEX_POINT('',#260967); +#260967 = CARTESIAN_POINT('',(189.771542,-58.4056,1.56)); +#260968 = CIRCLE('',#260969,0.487392); +#260969 = AXIS2_PLACEMENT_3D('',#260970,#260971,#260972); +#260970 = CARTESIAN_POINT('',(189.28415,-58.4056,1.56)); +#260971 = DIRECTION('',(0.,0.,1.)); +#260972 = DIRECTION('',(1.,0.,-0.)); +#260973 = FACE_BOUND('',#260974,.F.); +#260974 = EDGE_LOOP('',(#260975)); +#260975 = ORIENTED_EDGE('',*,*,#260976,.T.); +#260976 = EDGE_CURVE('',#260977,#260977,#260979,.T.); +#260977 = VERTEX_POINT('',#260978); +#260978 = CARTESIAN_POINT('',(194.851542,-58.4056,1.56)); +#260979 = CIRCLE('',#260980,0.487392); +#260980 = AXIS2_PLACEMENT_3D('',#260981,#260982,#260983); +#260981 = CARTESIAN_POINT('',(194.36415,-58.4056,1.56)); +#260982 = DIRECTION('',(0.,0.,1.)); +#260983 = DIRECTION('',(1.,0.,-0.)); +#260984 = FACE_BOUND('',#260985,.F.); +#260985 = EDGE_LOOP('',(#260986)); +#260986 = ORIENTED_EDGE('',*,*,#260987,.T.); +#260987 = EDGE_CURVE('',#260988,#260988,#260990,.T.); +#260988 = VERTEX_POINT('',#260989); +#260989 = CARTESIAN_POINT('',(210.654042,-56.8231,1.56)); +#260990 = CIRCLE('',#260991,0.462392); +#260991 = AXIS2_PLACEMENT_3D('',#260992,#260993,#260994); +#260992 = CARTESIAN_POINT('',(210.19165,-56.8231,1.56)); +#260993 = DIRECTION('',(0.,0.,1.)); +#260994 = DIRECTION('',(1.,0.,-0.)); +#260995 = FACE_BOUND('',#260996,.F.); +#260996 = EDGE_LOOP('',(#260997)); +#260997 = ORIENTED_EDGE('',*,*,#260998,.T.); +#260998 = EDGE_CURVE('',#260999,#260999,#261001,.T.); +#260999 = VERTEX_POINT('',#261000); +#261000 = CARTESIAN_POINT('',(107.679042,-56.3231,1.56)); +#261001 = CIRCLE('',#261002,0.487392); +#261002 = AXIS2_PLACEMENT_3D('',#261003,#261004,#261005); +#261003 = CARTESIAN_POINT('',(107.19165,-56.3231,1.56)); +#261004 = DIRECTION('',(0.,0.,1.)); +#261005 = DIRECTION('',(1.,0.,-0.)); +#261006 = FACE_BOUND('',#261007,.F.); +#261007 = EDGE_LOOP('',(#261008)); +#261008 = ORIENTED_EDGE('',*,*,#261009,.T.); +#261009 = EDGE_CURVE('',#261010,#261010,#261012,.T.); +#261010 = VERTEX_POINT('',#261011); +#261011 = CARTESIAN_POINT('',(110.219042,-56.3231,1.56)); +#261012 = CIRCLE('',#261013,0.487392); +#261013 = AXIS2_PLACEMENT_3D('',#261014,#261015,#261016); +#261014 = CARTESIAN_POINT('',(109.73165,-56.3231,1.56)); +#261015 = DIRECTION('',(0.,0.,1.)); +#261016 = DIRECTION('',(1.,0.,-0.)); +#261017 = FACE_BOUND('',#261018,.F.); +#261018 = EDGE_LOOP('',(#261019)); +#261019 = ORIENTED_EDGE('',*,*,#261020,.T.); +#261020 = EDGE_CURVE('',#261021,#261021,#261023,.T.); +#261021 = VERTEX_POINT('',#261022); +#261022 = CARTESIAN_POINT('',(112.759042,-56.3231,1.56)); +#261023 = CIRCLE('',#261024,0.487392); +#261024 = AXIS2_PLACEMENT_3D('',#261025,#261026,#261027); +#261025 = CARTESIAN_POINT('',(112.27165,-56.3231,1.56)); +#261026 = DIRECTION('',(0.,0.,1.)); +#261027 = DIRECTION('',(1.,0.,-0.)); +#261028 = FACE_BOUND('',#261029,.F.); +#261029 = EDGE_LOOP('',(#261030)); +#261030 = ORIENTED_EDGE('',*,*,#261031,.T.); +#261031 = EDGE_CURVE('',#261032,#261032,#261034,.T.); +#261032 = VERTEX_POINT('',#261033); +#261033 = CARTESIAN_POINT('',(115.299042,-56.3231,1.56)); +#261034 = CIRCLE('',#261035,0.487392); +#261035 = AXIS2_PLACEMENT_3D('',#261036,#261037,#261038); +#261036 = CARTESIAN_POINT('',(114.81165,-56.3231,1.56)); +#261037 = DIRECTION('',(0.,0.,1.)); +#261038 = DIRECTION('',(1.,0.,-0.)); +#261039 = FACE_BOUND('',#261040,.F.); +#261040 = EDGE_LOOP('',(#261041)); +#261041 = ORIENTED_EDGE('',*,*,#261042,.T.); +#261042 = EDGE_CURVE('',#261043,#261043,#261045,.T.); +#261043 = VERTEX_POINT('',#261044); +#261044 = CARTESIAN_POINT('',(117.839042,-56.3231,1.56)); +#261045 = CIRCLE('',#261046,0.487392); +#261046 = AXIS2_PLACEMENT_3D('',#261047,#261048,#261049); +#261047 = CARTESIAN_POINT('',(117.35165,-56.3231,1.56)); +#261048 = DIRECTION('',(0.,0.,1.)); +#261049 = DIRECTION('',(1.,0.,-0.)); +#261050 = FACE_BOUND('',#261051,.F.); +#261051 = EDGE_LOOP('',(#261052)); +#261052 = ORIENTED_EDGE('',*,*,#261053,.T.); +#261053 = EDGE_CURVE('',#261054,#261054,#261056,.T.); +#261054 = VERTEX_POINT('',#261055); +#261055 = CARTESIAN_POINT('',(120.379042,-56.3231,1.56)); +#261056 = CIRCLE('',#261057,0.487392); +#261057 = AXIS2_PLACEMENT_3D('',#261058,#261059,#261060); +#261058 = CARTESIAN_POINT('',(119.89165,-56.3231,1.56)); +#261059 = DIRECTION('',(0.,0.,1.)); +#261060 = DIRECTION('',(1.,0.,-0.)); +#261061 = FACE_BOUND('',#261062,.F.); +#261062 = EDGE_LOOP('',(#261063)); +#261063 = ORIENTED_EDGE('',*,*,#261064,.T.); +#261064 = EDGE_CURVE('',#261065,#261065,#261067,.T.); +#261065 = VERTEX_POINT('',#261066); +#261066 = CARTESIAN_POINT('',(122.919042,-56.3231,1.56)); +#261067 = CIRCLE('',#261068,0.487392); +#261068 = AXIS2_PLACEMENT_3D('',#261069,#261070,#261071); +#261069 = CARTESIAN_POINT('',(122.43165,-56.3231,1.56)); +#261070 = DIRECTION('',(0.,0.,1.)); +#261071 = DIRECTION('',(1.,0.,-0.)); +#261072 = FACE_BOUND('',#261073,.F.); +#261073 = EDGE_LOOP('',(#261074)); +#261074 = ORIENTED_EDGE('',*,*,#261075,.T.); +#261075 = EDGE_CURVE('',#261076,#261076,#261078,.T.); +#261076 = VERTEX_POINT('',#261077); +#261077 = CARTESIAN_POINT('',(125.459042,-56.3231,1.56)); +#261078 = CIRCLE('',#261079,0.487392); +#261079 = AXIS2_PLACEMENT_3D('',#261080,#261081,#261082); +#261080 = CARTESIAN_POINT('',(124.97165,-56.3231,1.56)); +#261081 = DIRECTION('',(0.,0.,1.)); +#261082 = DIRECTION('',(1.,0.,-0.)); +#261083 = FACE_BOUND('',#261084,.F.); +#261084 = EDGE_LOOP('',(#261085)); +#261085 = ORIENTED_EDGE('',*,*,#261086,.T.); +#261086 = EDGE_CURVE('',#261087,#261087,#261089,.T.); +#261087 = VERTEX_POINT('',#261088); +#261088 = CARTESIAN_POINT('',(127.999042,-56.3231,1.56)); +#261089 = CIRCLE('',#261090,0.487392); +#261090 = AXIS2_PLACEMENT_3D('',#261091,#261092,#261093); +#261091 = CARTESIAN_POINT('',(127.51165,-56.3231,1.56)); +#261092 = DIRECTION('',(0.,0.,1.)); +#261093 = DIRECTION('',(1.,0.,-0.)); +#261094 = FACE_BOUND('',#261095,.F.); +#261095 = EDGE_LOOP('',(#261096)); +#261096 = ORIENTED_EDGE('',*,*,#261097,.T.); +#261097 = EDGE_CURVE('',#261098,#261098,#261100,.T.); +#261098 = VERTEX_POINT('',#261099); +#261099 = CARTESIAN_POINT('',(130.539042,-56.3231,1.56)); +#261100 = CIRCLE('',#261101,0.487392); +#261101 = AXIS2_PLACEMENT_3D('',#261102,#261103,#261104); +#261102 = CARTESIAN_POINT('',(130.05165,-56.3231,1.56)); +#261103 = DIRECTION('',(0.,0.,1.)); +#261104 = DIRECTION('',(1.,0.,-0.)); +#261105 = FACE_BOUND('',#261106,.F.); +#261106 = EDGE_LOOP('',(#261107)); +#261107 = ORIENTED_EDGE('',*,*,#261108,.T.); +#261108 = EDGE_CURVE('',#261109,#261109,#261111,.T.); +#261109 = VERTEX_POINT('',#261110); +#261110 = CARTESIAN_POINT('',(133.079042,-56.3231,1.56)); +#261111 = CIRCLE('',#261112,0.487392); +#261112 = AXIS2_PLACEMENT_3D('',#261113,#261114,#261115); +#261113 = CARTESIAN_POINT('',(132.59165,-56.3231,1.56)); +#261114 = DIRECTION('',(0.,0.,1.)); +#261115 = DIRECTION('',(1.,0.,-0.)); +#261116 = FACE_BOUND('',#261117,.F.); +#261117 = EDGE_LOOP('',(#261118)); +#261118 = ORIENTED_EDGE('',*,*,#261119,.T.); +#261119 = EDGE_CURVE('',#261120,#261120,#261122,.T.); +#261120 = VERTEX_POINT('',#261121); +#261121 = CARTESIAN_POINT('',(135.619042,-56.3231,1.56)); +#261122 = CIRCLE('',#261123,0.487392); +#261123 = AXIS2_PLACEMENT_3D('',#261124,#261125,#261126); +#261124 = CARTESIAN_POINT('',(135.13165,-56.3231,1.56)); +#261125 = DIRECTION('',(0.,0.,1.)); +#261126 = DIRECTION('',(1.,0.,-0.)); +#261127 = FACE_BOUND('',#261128,.F.); +#261128 = EDGE_LOOP('',(#261129)); +#261129 = ORIENTED_EDGE('',*,*,#261130,.T.); +#261130 = EDGE_CURVE('',#261131,#261131,#261133,.T.); +#261131 = VERTEX_POINT('',#261132); +#261132 = CARTESIAN_POINT('',(138.159042,-56.3231,1.56)); +#261133 = CIRCLE('',#261134,0.487392); +#261134 = AXIS2_PLACEMENT_3D('',#261135,#261136,#261137); +#261135 = CARTESIAN_POINT('',(137.67165,-56.3231,1.56)); +#261136 = DIRECTION('',(0.,0.,1.)); +#261137 = DIRECTION('',(1.,0.,-0.)); +#261138 = FACE_BOUND('',#261139,.F.); +#261139 = EDGE_LOOP('',(#261140)); +#261140 = ORIENTED_EDGE('',*,*,#261141,.T.); +#261141 = EDGE_CURVE('',#261142,#261142,#261144,.T.); +#261142 = VERTEX_POINT('',#261143); +#261143 = CARTESIAN_POINT('',(140.699042,-56.3231,1.56)); +#261144 = CIRCLE('',#261145,0.487392); +#261145 = AXIS2_PLACEMENT_3D('',#261146,#261147,#261148); +#261146 = CARTESIAN_POINT('',(140.21165,-56.3231,1.56)); +#261147 = DIRECTION('',(0.,0.,1.)); +#261148 = DIRECTION('',(1.,0.,-0.)); +#261149 = FACE_BOUND('',#261150,.F.); +#261150 = EDGE_LOOP('',(#261151)); +#261151 = ORIENTED_EDGE('',*,*,#261152,.T.); +#261152 = EDGE_CURVE('',#261153,#261153,#261155,.T.); +#261153 = VERTEX_POINT('',#261154); +#261154 = CARTESIAN_POINT('',(143.239042,-56.3231,1.56)); +#261155 = CIRCLE('',#261156,0.487392); +#261156 = AXIS2_PLACEMENT_3D('',#261157,#261158,#261159); +#261157 = CARTESIAN_POINT('',(142.75165,-56.3231,1.56)); +#261158 = DIRECTION('',(0.,0.,1.)); +#261159 = DIRECTION('',(1.,0.,-0.)); +#261160 = FACE_BOUND('',#261161,.F.); +#261161 = EDGE_LOOP('',(#261162)); +#261162 = ORIENTED_EDGE('',*,*,#261163,.T.); +#261163 = EDGE_CURVE('',#261164,#261164,#261166,.T.); +#261164 = VERTEX_POINT('',#261165); +#261165 = CARTESIAN_POINT('',(145.779042,-56.3231,1.56)); +#261166 = CIRCLE('',#261167,0.487392); +#261167 = AXIS2_PLACEMENT_3D('',#261168,#261169,#261170); +#261168 = CARTESIAN_POINT('',(145.29165,-56.3231,1.56)); +#261169 = DIRECTION('',(0.,0.,1.)); +#261170 = DIRECTION('',(1.,0.,-0.)); +#261171 = FACE_BOUND('',#261172,.F.); +#261172 = EDGE_LOOP('',(#261173)); +#261173 = ORIENTED_EDGE('',*,*,#261174,.T.); +#261174 = EDGE_CURVE('',#261175,#261175,#261177,.T.); +#261175 = VERTEX_POINT('',#261176); +#261176 = CARTESIAN_POINT('',(148.319042,-56.3231,1.56)); +#261177 = CIRCLE('',#261178,0.487392); +#261178 = AXIS2_PLACEMENT_3D('',#261179,#261180,#261181); +#261179 = CARTESIAN_POINT('',(147.83165,-56.3231,1.56)); +#261180 = DIRECTION('',(0.,0.,1.)); +#261181 = DIRECTION('',(1.,0.,-0.)); +#261182 = FACE_BOUND('',#261183,.F.); +#261183 = EDGE_LOOP('',(#261184)); +#261184 = ORIENTED_EDGE('',*,*,#261185,.T.); +#261185 = EDGE_CURVE('',#261186,#261186,#261188,.T.); +#261186 = VERTEX_POINT('',#261187); +#261187 = CARTESIAN_POINT('',(150.859042,-56.3231,1.56)); +#261188 = CIRCLE('',#261189,0.487392); +#261189 = AXIS2_PLACEMENT_3D('',#261190,#261191,#261192); +#261190 = CARTESIAN_POINT('',(150.37165,-56.3231,1.56)); +#261191 = DIRECTION('',(0.,0.,1.)); +#261192 = DIRECTION('',(1.,0.,-0.)); +#261193 = FACE_BOUND('',#261194,.F.); +#261194 = EDGE_LOOP('',(#261195)); +#261195 = ORIENTED_EDGE('',*,*,#261196,.T.); +#261196 = EDGE_CURVE('',#261197,#261197,#261199,.T.); +#261197 = VERTEX_POINT('',#261198); +#261198 = CARTESIAN_POINT('',(153.399042,-56.3231,1.56)); +#261199 = CIRCLE('',#261200,0.487392); +#261200 = AXIS2_PLACEMENT_3D('',#261201,#261202,#261203); +#261201 = CARTESIAN_POINT('',(152.91165,-56.3231,1.56)); +#261202 = DIRECTION('',(0.,0.,1.)); +#261203 = DIRECTION('',(1.,0.,-0.)); +#261204 = FACE_BOUND('',#261205,.F.); +#261205 = EDGE_LOOP('',(#261206)); +#261206 = ORIENTED_EDGE('',*,*,#261207,.T.); +#261207 = EDGE_CURVE('',#261208,#261208,#261210,.T.); +#261208 = VERTEX_POINT('',#261209); +#261209 = CARTESIAN_POINT('',(155.939042,-56.3231,1.56)); +#261210 = CIRCLE('',#261211,0.487392); +#261211 = AXIS2_PLACEMENT_3D('',#261212,#261213,#261214); +#261212 = CARTESIAN_POINT('',(155.45165,-56.3231,1.56)); +#261213 = DIRECTION('',(0.,0.,1.)); +#261214 = DIRECTION('',(1.,0.,-0.)); +#261215 = FACE_BOUND('',#261216,.F.); +#261216 = EDGE_LOOP('',(#261217)); +#261217 = ORIENTED_EDGE('',*,*,#261218,.T.); +#261218 = EDGE_CURVE('',#261219,#261219,#261221,.T.); +#261219 = VERTEX_POINT('',#261220); +#261220 = CARTESIAN_POINT('',(189.771542,-55.8656,1.56)); +#261221 = CIRCLE('',#261222,0.487392); +#261222 = AXIS2_PLACEMENT_3D('',#261223,#261224,#261225); +#261223 = CARTESIAN_POINT('',(189.28415,-55.8656,1.56)); +#261224 = DIRECTION('',(0.,0.,1.)); +#261225 = DIRECTION('',(1.,0.,-0.)); +#261226 = FACE_BOUND('',#261227,.F.); +#261227 = EDGE_LOOP('',(#261228)); +#261228 = ORIENTED_EDGE('',*,*,#261229,.T.); +#261229 = EDGE_CURVE('',#261230,#261230,#261232,.T.); +#261230 = VERTEX_POINT('',#261231); +#261231 = CARTESIAN_POINT('',(194.851542,-55.8656,1.56)); +#261232 = CIRCLE('',#261233,0.487392); +#261233 = AXIS2_PLACEMENT_3D('',#261234,#261235,#261236); +#261234 = CARTESIAN_POINT('',(194.36415,-55.8656,1.56)); +#261235 = DIRECTION('',(0.,0.,1.)); +#261236 = DIRECTION('',(1.,0.,-0.)); +#261237 = FACE_BOUND('',#261238,.F.); +#261238 = EDGE_LOOP('',(#261239)); +#261239 = ORIENTED_EDGE('',*,*,#261240,.T.); +#261240 = EDGE_CURVE('',#261241,#261241,#261243,.T.); +#261241 = VERTEX_POINT('',#261242); +#261242 = CARTESIAN_POINT('',(210.654042,-54.3231,1.56)); +#261243 = CIRCLE('',#261244,0.462392); +#261244 = AXIS2_PLACEMENT_3D('',#261245,#261246,#261247); +#261245 = CARTESIAN_POINT('',(210.19165,-54.3231,1.56)); +#261246 = DIRECTION('',(0.,0.,1.)); +#261247 = DIRECTION('',(1.,0.,-0.)); +#261248 = FACE_BOUND('',#261249,.F.); +#261249 = EDGE_LOOP('',(#261250)); +#261250 = ORIENTED_EDGE('',*,*,#261251,.T.); +#261251 = EDGE_CURVE('',#261252,#261252,#261254,.T.); +#261252 = VERTEX_POINT('',#261253); +#261253 = CARTESIAN_POINT('',(111.679042,-51.4031,1.56)); +#261254 = CIRCLE('',#261255,0.487392); +#261255 = AXIS2_PLACEMENT_3D('',#261256,#261257,#261258); +#261256 = CARTESIAN_POINT('',(111.19165,-51.4031,1.56)); +#261257 = DIRECTION('',(0.,0.,1.)); +#261258 = DIRECTION('',(1.,0.,-0.)); +#261259 = FACE_BOUND('',#261260,.F.); +#261260 = EDGE_LOOP('',(#261261)); +#261261 = ORIENTED_EDGE('',*,*,#261262,.T.); +#261262 = EDGE_CURVE('',#261263,#261263,#261265,.T.); +#261263 = VERTEX_POINT('',#261264); +#261264 = CARTESIAN_POINT('',(111.679042,-48.8631,1.56)); +#261265 = CIRCLE('',#261266,0.487392); +#261266 = AXIS2_PLACEMENT_3D('',#261267,#261268,#261269); +#261267 = CARTESIAN_POINT('',(111.19165,-48.8631,1.56)); +#261268 = DIRECTION('',(0.,0.,1.)); +#261269 = DIRECTION('',(1.,0.,-0.)); +#261270 = FACE_BOUND('',#261271,.F.); +#261271 = EDGE_LOOP('',(#261272)); +#261272 = ORIENTED_EDGE('',*,*,#261273,.T.); +#261273 = EDGE_CURVE('',#261274,#261274,#261276,.T.); +#261274 = VERTEX_POINT('',#261275); +#261275 = CARTESIAN_POINT('',(86.779112,-45.3231,1.56)); +#261276 = CIRCLE('',#261277,1.587462); +#261277 = AXIS2_PLACEMENT_3D('',#261278,#261279,#261280); +#261278 = CARTESIAN_POINT('',(85.19165,-45.3231,1.56)); +#261279 = DIRECTION('',(0.,0.,1.)); +#261280 = DIRECTION('',(1.,0.,-0.)); +#261281 = FACE_BOUND('',#261282,.F.); +#261282 = EDGE_LOOP('',(#261283)); +#261283 = ORIENTED_EDGE('',*,*,#261284,.T.); +#261284 = EDGE_CURVE('',#261285,#261285,#261287,.T.); +#261285 = VERTEX_POINT('',#261286); +#261286 = CARTESIAN_POINT('',(212.779112,-45.3231,1.56)); +#261287 = CIRCLE('',#261288,1.587462); +#261288 = AXIS2_PLACEMENT_3D('',#261289,#261290,#261291); +#261289 = CARTESIAN_POINT('',(211.19165,-45.3231,1.56)); +#261290 = DIRECTION('',(0.,0.,1.)); +#261291 = DIRECTION('',(1.,0.,-0.)); +#261292 = FACE_BOUND('',#261293,.F.); +#261293 = EDGE_LOOP('',(#261294)); +#261294 = ORIENTED_EDGE('',*,*,#261295,.T.); +#261295 = EDGE_CURVE('',#261296,#261296,#261298,.T.); +#261296 = VERTEX_POINT('',#261297); +#261297 = CARTESIAN_POINT('',(111.679042,-46.3231,1.56)); +#261298 = CIRCLE('',#261299,0.487392); +#261299 = AXIS2_PLACEMENT_3D('',#261300,#261301,#261302); +#261300 = CARTESIAN_POINT('',(111.19165,-46.3231,1.56)); +#261301 = DIRECTION('',(0.,0.,1.)); +#261302 = DIRECTION('',(1.,0.,-0.)); +#261303 = FACE_BOUND('',#261304,.F.); +#261304 = EDGE_LOOP('',(#261305)); +#261305 = ORIENTED_EDGE('',*,*,#261306,.T.); +#261306 = EDGE_CURVE('',#261307,#261307,#261309,.T.); +#261307 = VERTEX_POINT('',#261308); +#261308 = CARTESIAN_POINT('',(127.679042,-46.3231,1.56)); +#261309 = CIRCLE('',#261310,0.487392); +#261310 = AXIS2_PLACEMENT_3D('',#261311,#261312,#261313); +#261311 = CARTESIAN_POINT('',(127.19165,-46.3231,1.56)); +#261312 = DIRECTION('',(0.,0.,1.)); +#261313 = DIRECTION('',(1.,0.,-0.)); +#261314 = FACE_BOUND('',#261315,.F.); +#261315 = EDGE_LOOP('',(#261316)); +#261316 = ORIENTED_EDGE('',*,*,#261317,.T.); +#261317 = EDGE_CURVE('',#261318,#261318,#261320,.T.); +#261318 = VERTEX_POINT('',#261319); +#261319 = CARTESIAN_POINT('',(130.179042,-46.3231,1.56)); +#261320 = CIRCLE('',#261321,0.487392); +#261321 = AXIS2_PLACEMENT_3D('',#261322,#261323,#261324); +#261322 = CARTESIAN_POINT('',(129.69165,-46.3231,1.56)); +#261323 = DIRECTION('',(0.,0.,1.)); +#261324 = DIRECTION('',(1.,0.,-0.)); +#261325 = FACE_BOUND('',#261326,.F.); +#261326 = EDGE_LOOP('',(#261327)); +#261327 = ORIENTED_EDGE('',*,*,#261328,.T.); +#261328 = EDGE_CURVE('',#261329,#261329,#261331,.T.); +#261329 = VERTEX_POINT('',#261330); +#261330 = CARTESIAN_POINT('',(136.279042,-46.3231,1.56)); +#261331 = CIRCLE('',#261332,0.487392); +#261332 = AXIS2_PLACEMENT_3D('',#261333,#261334,#261335); +#261333 = CARTESIAN_POINT('',(135.79165,-46.3231,1.56)); +#261334 = DIRECTION('',(0.,0.,1.)); +#261335 = DIRECTION('',(1.,0.,-0.)); +#261336 = FACE_BOUND('',#261337,.F.); +#261337 = EDGE_LOOP('',(#261338)); +#261338 = ORIENTED_EDGE('',*,*,#261339,.T.); +#261339 = EDGE_CURVE('',#261340,#261340,#261342,.T.); +#261340 = VERTEX_POINT('',#261341); +#261341 = CARTESIAN_POINT('',(138.779042,-46.3231,1.56)); +#261342 = CIRCLE('',#261343,0.487392); +#261343 = AXIS2_PLACEMENT_3D('',#261344,#261345,#261346); +#261344 = CARTESIAN_POINT('',(138.29165,-46.3231,1.56)); +#261345 = DIRECTION('',(0.,0.,1.)); +#261346 = DIRECTION('',(1.,0.,-0.)); +#261347 = FACE_BOUND('',#261348,.F.); +#261348 = EDGE_LOOP('',(#261349)); +#261349 = ORIENTED_EDGE('',*,*,#261350,.T.); +#261350 = EDGE_CURVE('',#261351,#261351,#261353,.T.); +#261351 = VERTEX_POINT('',#261352); +#261352 = CARTESIAN_POINT('',(98.654042,-46.3231,1.56)); +#261353 = CIRCLE('',#261354,0.462392); +#261354 = AXIS2_PLACEMENT_3D('',#261355,#261356,#261357); +#261355 = CARTESIAN_POINT('',(98.19165,-46.3231,1.56)); +#261356 = DIRECTION('',(0.,0.,1.)); +#261357 = DIRECTION('',(1.,0.,-0.)); +#261358 = FACE_BOUND('',#261359,.F.); +#261359 = EDGE_LOOP('',(#261360)); +#261360 = ORIENTED_EDGE('',*,*,#261361,.T.); +#261361 = EDGE_CURVE('',#261362,#261362,#261364,.T.); +#261362 = VERTEX_POINT('',#261363); +#261363 = CARTESIAN_POINT('',(101.154042,-46.3231,1.56)); +#261364 = CIRCLE('',#261365,0.462392); +#261365 = AXIS2_PLACEMENT_3D('',#261366,#261367,#261368); +#261366 = CARTESIAN_POINT('',(100.69165,-46.3231,1.56)); +#261367 = DIRECTION('',(0.,0.,1.)); +#261368 = DIRECTION('',(1.,0.,-0.)); +#261369 = FACE_BOUND('',#261370,.F.); +#261370 = EDGE_LOOP('',(#261371)); +#261371 = ORIENTED_EDGE('',*,*,#261372,.T.); +#261372 = EDGE_CURVE('',#261373,#261373,#261375,.T.); +#261373 = VERTEX_POINT('',#261374); +#261374 = CARTESIAN_POINT('',(103.654042,-46.3231,1.56)); +#261375 = CIRCLE('',#261376,0.462392); +#261376 = AXIS2_PLACEMENT_3D('',#261377,#261378,#261379); +#261377 = CARTESIAN_POINT('',(103.19165,-46.3231,1.56)); +#261378 = DIRECTION('',(0.,0.,1.)); +#261379 = DIRECTION('',(1.,0.,-0.)); +#261380 = FACE_BOUND('',#261381,.F.); +#261381 = EDGE_LOOP('',(#261382)); +#261382 = ORIENTED_EDGE('',*,*,#261383,.T.); +#261383 = EDGE_CURVE('',#261384,#261384,#261386,.T.); +#261384 = VERTEX_POINT('',#261385); +#261385 = CARTESIAN_POINT('',(106.154042,-46.3231,1.56)); +#261386 = CIRCLE('',#261387,0.462392); +#261387 = AXIS2_PLACEMENT_3D('',#261388,#261389,#261390); +#261388 = CARTESIAN_POINT('',(105.69165,-46.3231,1.56)); +#261389 = DIRECTION('',(0.,0.,1.)); +#261390 = DIRECTION('',(1.,0.,-0.)); +#261391 = FACE_BOUND('',#261392,.F.); +#261392 = EDGE_LOOP('',(#261393)); +#261393 = ORIENTED_EDGE('',*,*,#261394,.T.); +#261394 = EDGE_CURVE('',#261395,#261395,#261397,.T.); +#261395 = VERTEX_POINT('',#261396); +#261396 = CARTESIAN_POINT('',(116.654042,-46.3231,1.56)); +#261397 = CIRCLE('',#261398,0.462392); +#261398 = AXIS2_PLACEMENT_3D('',#261399,#261400,#261401); +#261399 = CARTESIAN_POINT('',(116.19165,-46.3231,1.56)); +#261400 = DIRECTION('',(0.,0.,1.)); +#261401 = DIRECTION('',(1.,0.,-0.)); +#261402 = FACE_BOUND('',#261403,.F.); +#261403 = EDGE_LOOP('',(#261404)); +#261404 = ORIENTED_EDGE('',*,*,#261405,.T.); +#261405 = EDGE_CURVE('',#261406,#261406,#261408,.T.); +#261406 = VERTEX_POINT('',#261407); +#261407 = CARTESIAN_POINT('',(119.154042,-46.3231,1.56)); +#261408 = CIRCLE('',#261409,0.462392); +#261409 = AXIS2_PLACEMENT_3D('',#261410,#261411,#261412); +#261410 = CARTESIAN_POINT('',(118.69165,-46.3231,1.56)); +#261411 = DIRECTION('',(0.,0.,1.)); +#261412 = DIRECTION('',(1.,0.,-0.)); +#261413 = FACE_BOUND('',#261414,.F.); +#261414 = EDGE_LOOP('',(#261415)); +#261415 = ORIENTED_EDGE('',*,*,#261416,.T.); +#261416 = EDGE_CURVE('',#261417,#261417,#261419,.T.); +#261417 = VERTEX_POINT('',#261418); +#261418 = CARTESIAN_POINT('',(121.654042,-46.3231,1.56)); +#261419 = CIRCLE('',#261420,0.462392); +#261420 = AXIS2_PLACEMENT_3D('',#261421,#261422,#261423); +#261421 = CARTESIAN_POINT('',(121.19165,-46.3231,1.56)); +#261422 = DIRECTION('',(0.,0.,1.)); +#261423 = DIRECTION('',(1.,0.,-0.)); +#261424 = PLANE('',#261425); +#261425 = AXIS2_PLACEMENT_3D('',#261426,#261427,#261428); +#261426 = CARTESIAN_POINT('',(0.,0.,1.56)); +#261427 = DIRECTION('',(0.,0.,1.)); +#261428 = DIRECTION('',(1.,0.,-0.)); +#261429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#261433)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#261430,#261431,#261432)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#261430 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#261431 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#261432 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#261433 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#261430, + 'distance_accuracy_value','confusion accuracy'); +#261434 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#261435,#261437); +#261435 = ( REPRESENTATION_RELATIONSHIP('','',#259300,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#261436) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#261436 = ITEM_DEFINED_TRANSFORMATION('','',#11,#503); +#261437 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #261438); +#261438 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('160','=>[0:1:1:71]','',#5, + #259295,$); +#261439 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#259297)); +#261440 = SHAPE_DEFINITION_REPRESENTATION(#261441,#261447); +#261441 = PRODUCT_DEFINITION_SHAPE('','',#261442); +#261442 = PRODUCT_DEFINITION('design','',#261443,#261446); +#261443 = PRODUCT_DEFINITION_FORMATION('','',#261444); +#261444 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_soldermask', + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_soldermask','',(#261445) + ); +#261445 = PRODUCT_CONTEXT('',#2,'mechanical'); +#261446 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#261447 = MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#11,#261448),#263440 + ); +#261448 = SHELL_BASED_SURFACE_MODEL('',(#261449)); +#261449 = OPEN_SHELL('',(#261450)); +#261450 = ADVANCED_FACE('',(#261451,#261485,#261496,#261507,#261518, + #261529,#261582,#261635,#261646,#261657,#261668,#261679,#261690, + #261701,#261712,#261765,#261818,#261829,#261840,#261851,#261862, + #261873,#261884,#261895,#261906,#261917,#261928,#261939,#261950, + #261961,#261972,#261983,#261994,#262005,#262016,#262027,#262038, + #262049,#262060,#262071,#262082,#262093,#262104,#262115,#262126, + #262137,#262148,#262159,#262170,#262181,#262192,#262203,#262214, + #262225,#262236,#262247,#262258,#262269,#262280,#262291,#262302, + #262313,#262324,#262335,#262346,#262357,#262368,#262379,#262390, + #262401,#262412,#262423,#262434,#262445,#262456,#262467,#262478, + #262489,#262500,#262511,#262522,#262533,#262544,#262555,#262566, + #262577,#262588,#262599,#262610,#262621,#262632,#262643,#262654, + #262665,#262676,#262687,#262698,#262709,#262720,#262731,#262742, + #262753,#262764,#262775,#262786,#262797,#262808,#262819,#262830, + #262841,#262852,#262863,#262874,#262885,#262896,#262907,#262918, + #262929,#262940,#262951,#262962,#262973,#262984,#262995,#263006, + #263017,#263028,#263039,#263050,#263061,#263072,#263083,#263094, + #263105,#263116,#263127,#263138,#263149,#263160,#263171,#263182, + #263193,#263204,#263215,#263226,#263237,#263248,#263259,#263270, + #263281,#263292,#263303,#263314,#263325,#263336,#263347,#263358, + #263369,#263380,#263391,#263402,#263413,#263424),#263435,.T.); +#261451 = FACE_BOUND('',#261452,.T.); +#261452 = EDGE_LOOP('',(#261453,#261463,#261471,#261479)); +#261453 = ORIENTED_EDGE('',*,*,#261454,.T.); +#261454 = EDGE_CURVE('',#261455,#261457,#261459,.T.); +#261455 = VERTEX_POINT('',#261456); +#261456 = CARTESIAN_POINT('',(80.19165,-140.3231,-5.E-02)); +#261457 = VERTEX_POINT('',#261458); +#261458 = CARTESIAN_POINT('',(80.19165,-40.3231,-5.E-02)); +#261459 = LINE('',#261460,#261461); +#261460 = CARTESIAN_POINT('',(80.19165,-140.3231,-5.E-02)); +#261461 = VECTOR('',#261462,1.); +#261462 = DIRECTION('',(0.,1.,0.)); +#261463 = ORIENTED_EDGE('',*,*,#261464,.T.); +#261464 = EDGE_CURVE('',#261457,#261465,#261467,.T.); +#261465 = VERTEX_POINT('',#261466); +#261466 = CARTESIAN_POINT('',(215.19165,-40.3231,-5.E-02)); +#261467 = LINE('',#261468,#261469); +#261468 = CARTESIAN_POINT('',(80.19165,-40.3231,-5.E-02)); +#261469 = VECTOR('',#261470,1.); +#261470 = DIRECTION('',(1.,0.,0.)); +#261471 = ORIENTED_EDGE('',*,*,#261472,.T.); +#261472 = EDGE_CURVE('',#261465,#261473,#261475,.T.); +#261473 = VERTEX_POINT('',#261474); +#261474 = CARTESIAN_POINT('',(215.19165,-140.3231,-5.E-02)); +#261475 = LINE('',#261476,#261477); +#261476 = CARTESIAN_POINT('',(215.19165,-40.3231,-5.E-02)); +#261477 = VECTOR('',#261478,1.); +#261478 = DIRECTION('',(0.,-1.,0.)); +#261479 = ORIENTED_EDGE('',*,*,#261480,.T.); +#261480 = EDGE_CURVE('',#261473,#261455,#261481,.T.); +#261481 = LINE('',#261482,#261483); +#261482 = CARTESIAN_POINT('',(215.19165,-140.3231,-5.E-02)); +#261483 = VECTOR('',#261484,1.); +#261484 = DIRECTION('',(-1.,0.,0.)); +#261485 = FACE_BOUND('',#261486,.T.); +#261486 = EDGE_LOOP('',(#261487)); +#261487 = ORIENTED_EDGE('',*,*,#261488,.T.); +#261488 = EDGE_CURVE('',#261489,#261489,#261491,.T.); +#261489 = VERTEX_POINT('',#261490); +#261490 = CARTESIAN_POINT('',(199.729042,-137.8231,-5.E-02)); +#261491 = CIRCLE('',#261492,0.537392); +#261492 = AXIS2_PLACEMENT_3D('',#261493,#261494,#261495); +#261493 = CARTESIAN_POINT('',(199.19165,-137.8231,-5.E-02)); +#261494 = DIRECTION('',(0.,0.,1.)); +#261495 = DIRECTION('',(1.,0.,-0.)); +#261496 = FACE_BOUND('',#261497,.T.); +#261497 = EDGE_LOOP('',(#261498)); +#261498 = ORIENTED_EDGE('',*,*,#261499,.T.); +#261499 = EDGE_CURVE('',#261500,#261500,#261502,.T.); +#261500 = VERTEX_POINT('',#261501); +#261501 = CARTESIAN_POINT('',(206.229042,-137.8231,-5.E-02)); +#261502 = CIRCLE('',#261503,0.537392); +#261503 = AXIS2_PLACEMENT_3D('',#261504,#261505,#261506); +#261504 = CARTESIAN_POINT('',(205.69165,-137.8231,-5.E-02)); +#261505 = DIRECTION('',(0.,0.,1.)); +#261506 = DIRECTION('',(1.,0.,-0.)); +#261507 = FACE_BOUND('',#261508,.T.); +#261508 = EDGE_LOOP('',(#261509)); +#261509 = ORIENTED_EDGE('',*,*,#261510,.T.); +#261510 = EDGE_CURVE('',#261511,#261511,#261513,.T.); +#261511 = VERTEX_POINT('',#261512); +#261512 = CARTESIAN_POINT('',(86.779112,-135.3231,-5.E-02)); +#261513 = CIRCLE('',#261514,1.587462); +#261514 = AXIS2_PLACEMENT_3D('',#261515,#261516,#261517); +#261515 = CARTESIAN_POINT('',(85.19165,-135.3231,-5.E-02)); +#261516 = DIRECTION('',(0.,0.,1.)); +#261517 = DIRECTION('',(1.,0.,-0.)); +#261518 = FACE_BOUND('',#261519,.T.); +#261519 = EDGE_LOOP('',(#261520)); +#261520 = ORIENTED_EDGE('',*,*,#261521,.T.); +#261521 = EDGE_CURVE('',#261522,#261522,#261524,.T.); +#261522 = VERTEX_POINT('',#261523); +#261523 = CARTESIAN_POINT('',(212.779112,-135.3231,-5.E-02)); +#261524 = CIRCLE('',#261525,1.587462); +#261525 = AXIS2_PLACEMENT_3D('',#261526,#261527,#261528); +#261526 = CARTESIAN_POINT('',(211.19165,-135.3231,-5.E-02)); +#261527 = DIRECTION('',(0.,0.,1.)); +#261528 = DIRECTION('',(1.,0.,-0.)); +#261529 = FACE_BOUND('',#261530,.T.); +#261530 = EDGE_LOOP('',(#261531,#261542,#261550,#261559,#261567,#261576) + ); +#261531 = ORIENTED_EDGE('',*,*,#261532,.T.); +#261532 = EDGE_CURVE('',#261533,#261535,#261537,.T.); +#261533 = VERTEX_POINT('',#261534); +#261534 = CARTESIAN_POINT('',(159.5375,-134.184593,-5.E-02)); +#261535 = VERTEX_POINT('',#261536); +#261536 = CARTESIAN_POINT('',(159.862513,-134.469933,-5.E-02)); +#261537 = CIRCLE('',#261538,0.28758545494); +#261538 = AXIS2_PLACEMENT_3D('',#261539,#261540,#261541); +#261539 = CARTESIAN_POINT('',(159.82508538508,-134.184793442,-5.E-02)); +#261540 = DIRECTION('',(0.,0.,1.)); +#261541 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#261542 = ORIENTED_EDGE('',*,*,#261543,.T.); +#261543 = EDGE_CURVE('',#261535,#261544,#261546,.T.); +#261544 = VERTEX_POINT('',#261545); +#261545 = CARTESIAN_POINT('',(159.93498,-134.450515,-5.E-02)); +#261546 = LINE('',#261547,#261548); +#261547 = CARTESIAN_POINT('',(159.862513,-134.469933,-5.E-02)); +#261548 = VECTOR('',#261549,1.); +#261549 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261550 = ORIENTED_EDGE('',*,*,#261551,.T.); +#261551 = EDGE_CURVE('',#261544,#261552,#261554,.T.); +#261552 = VERTEX_POINT('',#261553); +#261553 = CARTESIAN_POINT('',(160.1125,-134.184593,-5.E-02)); +#261554 = CIRCLE('',#261555,0.287686427939); +#261555 = AXIS2_PLACEMENT_3D('',#261556,#261557,#261558); +#261556 = CARTESIAN_POINT('',(159.8248136193,-134.1847578751,-5.E-02)); +#261557 = DIRECTION('',(0.,0.,1.)); +#261558 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261559 = ORIENTED_EDGE('',*,*,#261560,.T.); +#261560 = EDGE_CURVE('',#261552,#261561,#261563,.T.); +#261561 = VERTEX_POINT('',#261562); +#261562 = CARTESIAN_POINT('',(160.1125,-133.385406,-5.E-02)); +#261563 = LINE('',#261564,#261565); +#261564 = CARTESIAN_POINT('',(160.1125,-134.184593,-5.E-02)); +#261565 = VECTOR('',#261566,1.); +#261566 = DIRECTION('',(0.,1.,0.)); +#261567 = ORIENTED_EDGE('',*,*,#261568,.T.); +#261568 = EDGE_CURVE('',#261561,#261569,#261571,.T.); +#261569 = VERTEX_POINT('',#261570); +#261570 = CARTESIAN_POINT('',(159.5375,-133.385406,-5.E-02)); +#261571 = CIRCLE('',#261572,0.287500026505); +#261572 = AXIS2_PLACEMENT_3D('',#261573,#261574,#261575); +#261573 = CARTESIAN_POINT('',(159.825,-133.3852825479,-5.E-02)); +#261574 = DIRECTION('',(0.,0.,1.)); +#261575 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261576 = ORIENTED_EDGE('',*,*,#261577,.T.); +#261577 = EDGE_CURVE('',#261569,#261533,#261578,.T.); +#261578 = LINE('',#261579,#261580); +#261579 = CARTESIAN_POINT('',(159.5375,-133.385406,-5.E-02)); +#261580 = VECTOR('',#261581,1.); +#261581 = DIRECTION('',(0.,-1.,0.)); +#261582 = FACE_BOUND('',#261583,.T.); +#261583 = EDGE_LOOP('',(#261584,#261595,#261603,#261612,#261620,#261629) + ); +#261584 = ORIENTED_EDGE('',*,*,#261585,.T.); +#261585 = EDGE_CURVE('',#261586,#261588,#261590,.T.); +#261586 = VERTEX_POINT('',#261587); +#261587 = CARTESIAN_POINT('',(168.1875,-134.184593,-5.E-02)); +#261588 = VERTEX_POINT('',#261589); +#261589 = CARTESIAN_POINT('',(168.512513,-134.469933,-5.E-02)); +#261590 = CIRCLE('',#261591,0.28758545494); +#261591 = AXIS2_PLACEMENT_3D('',#261592,#261593,#261594); +#261592 = CARTESIAN_POINT('',(168.47508538508,-134.184793442,-5.E-02)); +#261593 = DIRECTION('',(0.,0.,1.)); +#261594 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#261595 = ORIENTED_EDGE('',*,*,#261596,.T.); +#261596 = EDGE_CURVE('',#261588,#261597,#261599,.T.); +#261597 = VERTEX_POINT('',#261598); +#261598 = CARTESIAN_POINT('',(168.58498,-134.450515,-5.E-02)); +#261599 = LINE('',#261600,#261601); +#261600 = CARTESIAN_POINT('',(168.512513,-134.469933,-5.E-02)); +#261601 = VECTOR('',#261602,1.); +#261602 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261603 = ORIENTED_EDGE('',*,*,#261604,.T.); +#261604 = EDGE_CURVE('',#261597,#261605,#261607,.T.); +#261605 = VERTEX_POINT('',#261606); +#261606 = CARTESIAN_POINT('',(168.7625,-134.184593,-5.E-02)); +#261607 = CIRCLE('',#261608,0.287686427939); +#261608 = AXIS2_PLACEMENT_3D('',#261609,#261610,#261611); +#261609 = CARTESIAN_POINT('',(168.4748136193,-134.1847578751,-5.E-02)); +#261610 = DIRECTION('',(0.,0.,1.)); +#261611 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261612 = ORIENTED_EDGE('',*,*,#261613,.T.); +#261613 = EDGE_CURVE('',#261605,#261614,#261616,.T.); +#261614 = VERTEX_POINT('',#261615); +#261615 = CARTESIAN_POINT('',(168.7625,-133.385406,-5.E-02)); +#261616 = LINE('',#261617,#261618); +#261617 = CARTESIAN_POINT('',(168.7625,-134.184593,-5.E-02)); +#261618 = VECTOR('',#261619,1.); +#261619 = DIRECTION('',(0.,1.,0.)); +#261620 = ORIENTED_EDGE('',*,*,#261621,.T.); +#261621 = EDGE_CURVE('',#261614,#261622,#261624,.T.); +#261622 = VERTEX_POINT('',#261623); +#261623 = CARTESIAN_POINT('',(168.1875,-133.385406,-5.E-02)); +#261624 = CIRCLE('',#261625,0.287500026505); +#261625 = AXIS2_PLACEMENT_3D('',#261626,#261627,#261628); +#261626 = CARTESIAN_POINT('',(168.475,-133.3852825479,-5.E-02)); +#261627 = DIRECTION('',(0.,0.,1.)); +#261628 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261629 = ORIENTED_EDGE('',*,*,#261630,.T.); +#261630 = EDGE_CURVE('',#261622,#261586,#261631,.T.); +#261631 = LINE('',#261632,#261633); +#261632 = CARTESIAN_POINT('',(168.1875,-133.385406,-5.E-02)); +#261633 = VECTOR('',#261634,1.); +#261634 = DIRECTION('',(0.,-1.,0.)); +#261635 = FACE_BOUND('',#261636,.T.); +#261636 = EDGE_LOOP('',(#261637)); +#261637 = ORIENTED_EDGE('',*,*,#261638,.T.); +#261638 = EDGE_CURVE('',#261639,#261639,#261641,.T.); +#261639 = VERTEX_POINT('',#261640); +#261640 = CARTESIAN_POINT('',(173.329089,-133.8231,-5.E-02)); +#261641 = CIRCLE('',#261642,0.637439); +#261642 = AXIS2_PLACEMENT_3D('',#261643,#261644,#261645); +#261643 = CARTESIAN_POINT('',(172.69165,-133.8231,-5.E-02)); +#261644 = DIRECTION('',(0.,0.,1.)); +#261645 = DIRECTION('',(1.,0.,-0.)); +#261646 = FACE_BOUND('',#261647,.T.); +#261647 = EDGE_LOOP('',(#261648)); +#261648 = ORIENTED_EDGE('',*,*,#261649,.T.); +#261649 = EDGE_CURVE('',#261650,#261650,#261652,.T.); +#261650 = VERTEX_POINT('',#261651); +#261651 = CARTESIAN_POINT('',(178.329089,-133.8231,-5.E-02)); +#261652 = CIRCLE('',#261653,0.637439); +#261653 = AXIS2_PLACEMENT_3D('',#261654,#261655,#261656); +#261654 = CARTESIAN_POINT('',(177.69165,-133.8231,-5.E-02)); +#261655 = DIRECTION('',(0.,0.,1.)); +#261656 = DIRECTION('',(1.,0.,-0.)); +#261657 = FACE_BOUND('',#261658,.T.); +#261658 = EDGE_LOOP('',(#261659)); +#261659 = ORIENTED_EDGE('',*,*,#261660,.T.); +#261660 = EDGE_CURVE('',#261661,#261661,#261663,.T.); +#261661 = VERTEX_POINT('',#261662); +#261662 = CARTESIAN_POINT('',(183.329089,-133.8231,-5.E-02)); +#261663 = CIRCLE('',#261664,0.637439); +#261664 = AXIS2_PLACEMENT_3D('',#261665,#261666,#261667); +#261665 = CARTESIAN_POINT('',(182.69165,-133.8231,-5.E-02)); +#261666 = DIRECTION('',(0.,0.,1.)); +#261667 = DIRECTION('',(1.,0.,-0.)); +#261668 = FACE_BOUND('',#261669,.T.); +#261669 = EDGE_LOOP('',(#261670)); +#261670 = ORIENTED_EDGE('',*,*,#261671,.T.); +#261671 = EDGE_CURVE('',#261672,#261672,#261674,.T.); +#261672 = VERTEX_POINT('',#261673); +#261673 = CARTESIAN_POINT('',(188.329089,-133.8231,-5.E-02)); +#261674 = CIRCLE('',#261675,0.637439); +#261675 = AXIS2_PLACEMENT_3D('',#261676,#261677,#261678); +#261676 = CARTESIAN_POINT('',(187.69165,-133.8231,-5.E-02)); +#261677 = DIRECTION('',(0.,0.,1.)); +#261678 = DIRECTION('',(1.,0.,-0.)); +#261679 = FACE_BOUND('',#261680,.T.); +#261680 = EDGE_LOOP('',(#261681)); +#261681 = ORIENTED_EDGE('',*,*,#261682,.T.); +#261682 = EDGE_CURVE('',#261683,#261683,#261685,.T.); +#261683 = VERTEX_POINT('',#261684); +#261684 = CARTESIAN_POINT('',(193.329089,-133.8231,-5.E-02)); +#261685 = CIRCLE('',#261686,0.637439); +#261686 = AXIS2_PLACEMENT_3D('',#261687,#261688,#261689); +#261687 = CARTESIAN_POINT('',(192.69165,-133.8231,-5.E-02)); +#261688 = DIRECTION('',(0.,0.,1.)); +#261689 = DIRECTION('',(1.,0.,-0.)); +#261690 = FACE_BOUND('',#261691,.T.); +#261691 = EDGE_LOOP('',(#261692)); +#261692 = ORIENTED_EDGE('',*,*,#261693,.T.); +#261693 = EDGE_CURVE('',#261694,#261694,#261696,.T.); +#261694 = VERTEX_POINT('',#261695); +#261695 = CARTESIAN_POINT('',(199.729042,-133.3231,-5.E-02)); +#261696 = CIRCLE('',#261697,0.537392); +#261697 = AXIS2_PLACEMENT_3D('',#261698,#261699,#261700); +#261698 = CARTESIAN_POINT('',(199.19165,-133.3231,-5.E-02)); +#261699 = DIRECTION('',(0.,0.,1.)); +#261700 = DIRECTION('',(1.,0.,-0.)); +#261701 = FACE_BOUND('',#261702,.T.); +#261702 = EDGE_LOOP('',(#261703)); +#261703 = ORIENTED_EDGE('',*,*,#261704,.T.); +#261704 = EDGE_CURVE('',#261705,#261705,#261707,.T.); +#261705 = VERTEX_POINT('',#261706); +#261706 = CARTESIAN_POINT('',(206.229042,-133.3231,-5.E-02)); +#261707 = CIRCLE('',#261708,0.537392); +#261708 = AXIS2_PLACEMENT_3D('',#261709,#261710,#261711); +#261709 = CARTESIAN_POINT('',(205.69165,-133.3231,-5.E-02)); +#261710 = DIRECTION('',(0.,0.,1.)); +#261711 = DIRECTION('',(1.,0.,-0.)); +#261712 = FACE_BOUND('',#261713,.T.); +#261713 = EDGE_LOOP('',(#261714,#261725,#261733,#261742,#261750,#261759) + ); +#261714 = ORIENTED_EDGE('',*,*,#261715,.T.); +#261715 = EDGE_CURVE('',#261716,#261718,#261720,.T.); +#261716 = VERTEX_POINT('',#261717); +#261717 = CARTESIAN_POINT('',(159.5375,-131.154593,-5.E-02)); +#261718 = VERTEX_POINT('',#261719); +#261719 = CARTESIAN_POINT('',(159.862513,-131.439933,-5.E-02)); +#261720 = CIRCLE('',#261721,0.28758545494); +#261721 = AXIS2_PLACEMENT_3D('',#261722,#261723,#261724); +#261722 = CARTESIAN_POINT('',(159.82508538508,-131.154793442,-5.E-02)); +#261723 = DIRECTION('',(0.,0.,1.)); +#261724 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#261725 = ORIENTED_EDGE('',*,*,#261726,.T.); +#261726 = EDGE_CURVE('',#261718,#261727,#261729,.T.); +#261727 = VERTEX_POINT('',#261728); +#261728 = CARTESIAN_POINT('',(159.93498,-131.420515,-5.E-02)); +#261729 = LINE('',#261730,#261731); +#261730 = CARTESIAN_POINT('',(159.862513,-131.439933,-5.E-02)); +#261731 = VECTOR('',#261732,1.); +#261732 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261733 = ORIENTED_EDGE('',*,*,#261734,.T.); +#261734 = EDGE_CURVE('',#261727,#261735,#261737,.T.); +#261735 = VERTEX_POINT('',#261736); +#261736 = CARTESIAN_POINT('',(160.1125,-131.154593,-5.E-02)); +#261737 = CIRCLE('',#261738,0.287686427939); +#261738 = AXIS2_PLACEMENT_3D('',#261739,#261740,#261741); +#261739 = CARTESIAN_POINT('',(159.8248136193,-131.1547578751,-5.E-02)); +#261740 = DIRECTION('',(0.,0.,1.)); +#261741 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261742 = ORIENTED_EDGE('',*,*,#261743,.T.); +#261743 = EDGE_CURVE('',#261735,#261744,#261746,.T.); +#261744 = VERTEX_POINT('',#261745); +#261745 = CARTESIAN_POINT('',(160.1125,-129.655406,-5.E-02)); +#261746 = LINE('',#261747,#261748); +#261747 = CARTESIAN_POINT('',(160.1125,-131.154593,-5.E-02)); +#261748 = VECTOR('',#261749,1.); +#261749 = DIRECTION('',(0.,1.,0.)); +#261750 = ORIENTED_EDGE('',*,*,#261751,.T.); +#261751 = EDGE_CURVE('',#261744,#261752,#261754,.T.); +#261752 = VERTEX_POINT('',#261753); +#261753 = CARTESIAN_POINT('',(159.5375,-129.655406,-5.E-02)); +#261754 = CIRCLE('',#261755,0.287500026505); +#261755 = AXIS2_PLACEMENT_3D('',#261756,#261757,#261758); +#261756 = CARTESIAN_POINT('',(159.825,-129.6552825479,-5.E-02)); +#261757 = DIRECTION('',(0.,0.,1.)); +#261758 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261759 = ORIENTED_EDGE('',*,*,#261760,.T.); +#261760 = EDGE_CURVE('',#261752,#261716,#261761,.T.); +#261761 = LINE('',#261762,#261763); +#261762 = CARTESIAN_POINT('',(159.5375,-129.655406,-5.E-02)); +#261763 = VECTOR('',#261764,1.); +#261764 = DIRECTION('',(0.,-1.,0.)); +#261765 = FACE_BOUND('',#261766,.T.); +#261766 = EDGE_LOOP('',(#261767,#261778,#261786,#261795,#261803,#261812) + ); +#261767 = ORIENTED_EDGE('',*,*,#261768,.T.); +#261768 = EDGE_CURVE('',#261769,#261771,#261773,.T.); +#261769 = VERTEX_POINT('',#261770); +#261770 = CARTESIAN_POINT('',(168.1875,-131.154593,-5.E-02)); +#261771 = VERTEX_POINT('',#261772); +#261772 = CARTESIAN_POINT('',(168.512513,-131.439933,-5.E-02)); +#261773 = CIRCLE('',#261774,0.28758545494); +#261774 = AXIS2_PLACEMENT_3D('',#261775,#261776,#261777); +#261775 = CARTESIAN_POINT('',(168.47508538508,-131.154793442,-5.E-02)); +#261776 = DIRECTION('',(0.,0.,1.)); +#261777 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#261778 = ORIENTED_EDGE('',*,*,#261779,.T.); +#261779 = EDGE_CURVE('',#261771,#261780,#261782,.T.); +#261780 = VERTEX_POINT('',#261781); +#261781 = CARTESIAN_POINT('',(168.58498,-131.420515,-5.E-02)); +#261782 = LINE('',#261783,#261784); +#261783 = CARTESIAN_POINT('',(168.512513,-131.439933,-5.E-02)); +#261784 = VECTOR('',#261785,1.); +#261785 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261786 = ORIENTED_EDGE('',*,*,#261787,.T.); +#261787 = EDGE_CURVE('',#261780,#261788,#261790,.T.); +#261788 = VERTEX_POINT('',#261789); +#261789 = CARTESIAN_POINT('',(168.7625,-131.154593,-5.E-02)); +#261790 = CIRCLE('',#261791,0.287686427939); +#261791 = AXIS2_PLACEMENT_3D('',#261792,#261793,#261794); +#261792 = CARTESIAN_POINT('',(168.4748136193,-131.1547578751,-5.E-02)); +#261793 = DIRECTION('',(0.,0.,1.)); +#261794 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261795 = ORIENTED_EDGE('',*,*,#261796,.T.); +#261796 = EDGE_CURVE('',#261788,#261797,#261799,.T.); +#261797 = VERTEX_POINT('',#261798); +#261798 = CARTESIAN_POINT('',(168.7625,-129.655406,-5.E-02)); +#261799 = LINE('',#261800,#261801); +#261800 = CARTESIAN_POINT('',(168.7625,-131.154593,-5.E-02)); +#261801 = VECTOR('',#261802,1.); +#261802 = DIRECTION('',(0.,1.,0.)); +#261803 = ORIENTED_EDGE('',*,*,#261804,.T.); +#261804 = EDGE_CURVE('',#261797,#261805,#261807,.T.); +#261805 = VERTEX_POINT('',#261806); +#261806 = CARTESIAN_POINT('',(168.1875,-129.655406,-5.E-02)); +#261807 = CIRCLE('',#261808,0.287500026505); +#261808 = AXIS2_PLACEMENT_3D('',#261809,#261810,#261811); +#261809 = CARTESIAN_POINT('',(168.475,-129.6552825479,-5.E-02)); +#261810 = DIRECTION('',(0.,0.,1.)); +#261811 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261812 = ORIENTED_EDGE('',*,*,#261813,.T.); +#261813 = EDGE_CURVE('',#261805,#261769,#261814,.T.); +#261814 = LINE('',#261815,#261816); +#261815 = CARTESIAN_POINT('',(168.1875,-129.655406,-5.E-02)); +#261816 = VECTOR('',#261817,1.); +#261817 = DIRECTION('',(0.,-1.,0.)); +#261818 = FACE_BOUND('',#261819,.T.); +#261819 = EDGE_LOOP('',(#261820)); +#261820 = ORIENTED_EDGE('',*,*,#261821,.T.); +#261821 = EDGE_CURVE('',#261822,#261822,#261824,.T.); +#261822 = VERTEX_POINT('',#261823); +#261823 = CARTESIAN_POINT('',(161.362254,-130.775,-5.E-02)); +#261824 = CIRCLE('',#261825,0.187254); +#261825 = AXIS2_PLACEMENT_3D('',#261826,#261827,#261828); +#261826 = CARTESIAN_POINT('',(161.175,-130.775,-5.E-02)); +#261827 = DIRECTION('',(0.,0.,1.)); +#261828 = DIRECTION('',(1.,0.,-0.)); +#261829 = FACE_BOUND('',#261830,.T.); +#261830 = EDGE_LOOP('',(#261831)); +#261831 = ORIENTED_EDGE('',*,*,#261832,.T.); +#261832 = EDGE_CURVE('',#261833,#261833,#261835,.T.); +#261833 = VERTEX_POINT('',#261834); +#261834 = CARTESIAN_POINT('',(162.212254,-130.775,-5.E-02)); +#261835 = CIRCLE('',#261836,0.187254); +#261836 = AXIS2_PLACEMENT_3D('',#261837,#261838,#261839); +#261837 = CARTESIAN_POINT('',(162.025,-130.775,-5.E-02)); +#261838 = DIRECTION('',(0.,0.,1.)); +#261839 = DIRECTION('',(1.,0.,-0.)); +#261840 = FACE_BOUND('',#261841,.T.); +#261841 = EDGE_LOOP('',(#261842)); +#261842 = ORIENTED_EDGE('',*,*,#261843,.T.); +#261843 = EDGE_CURVE('',#261844,#261844,#261846,.T.); +#261844 = VERTEX_POINT('',#261845); +#261845 = CARTESIAN_POINT('',(163.062254,-130.775,-5.E-02)); +#261846 = CIRCLE('',#261847,0.187254); +#261847 = AXIS2_PLACEMENT_3D('',#261848,#261849,#261850); +#261848 = CARTESIAN_POINT('',(162.875,-130.775,-5.E-02)); +#261849 = DIRECTION('',(0.,0.,1.)); +#261850 = DIRECTION('',(1.,0.,-0.)); +#261851 = FACE_BOUND('',#261852,.T.); +#261852 = EDGE_LOOP('',(#261853)); +#261853 = ORIENTED_EDGE('',*,*,#261854,.T.); +#261854 = EDGE_CURVE('',#261855,#261855,#261857,.T.); +#261855 = VERTEX_POINT('',#261856); +#261856 = CARTESIAN_POINT('',(163.912254,-130.775,-5.E-02)); +#261857 = CIRCLE('',#261858,0.187254); +#261858 = AXIS2_PLACEMENT_3D('',#261859,#261860,#261861); +#261859 = CARTESIAN_POINT('',(163.725,-130.775,-5.E-02)); +#261860 = DIRECTION('',(0.,0.,1.)); +#261861 = DIRECTION('',(1.,0.,-0.)); +#261862 = FACE_BOUND('',#261863,.T.); +#261863 = EDGE_LOOP('',(#261864)); +#261864 = ORIENTED_EDGE('',*,*,#261865,.T.); +#261865 = EDGE_CURVE('',#261866,#261866,#261868,.T.); +#261866 = VERTEX_POINT('',#261867); +#261867 = CARTESIAN_POINT('',(164.762254,-130.775,-5.E-02)); +#261868 = CIRCLE('',#261869,0.187254); +#261869 = AXIS2_PLACEMENT_3D('',#261870,#261871,#261872); +#261870 = CARTESIAN_POINT('',(164.575,-130.775,-5.E-02)); +#261871 = DIRECTION('',(0.,0.,1.)); +#261872 = DIRECTION('',(1.,0.,-0.)); +#261873 = FACE_BOUND('',#261874,.T.); +#261874 = EDGE_LOOP('',(#261875)); +#261875 = ORIENTED_EDGE('',*,*,#261876,.T.); +#261876 = EDGE_CURVE('',#261877,#261877,#261879,.T.); +#261877 = VERTEX_POINT('',#261878); +#261878 = CARTESIAN_POINT('',(165.612254,-130.775,-5.E-02)); +#261879 = CIRCLE('',#261880,0.187254); +#261880 = AXIS2_PLACEMENT_3D('',#261881,#261882,#261883); +#261881 = CARTESIAN_POINT('',(165.425,-130.775,-5.E-02)); +#261882 = DIRECTION('',(0.,0.,1.)); +#261883 = DIRECTION('',(1.,0.,-0.)); +#261884 = FACE_BOUND('',#261885,.T.); +#261885 = EDGE_LOOP('',(#261886)); +#261886 = ORIENTED_EDGE('',*,*,#261887,.T.); +#261887 = EDGE_CURVE('',#261888,#261888,#261890,.T.); +#261888 = VERTEX_POINT('',#261889); +#261889 = CARTESIAN_POINT('',(166.462254,-130.775,-5.E-02)); +#261890 = CIRCLE('',#261891,0.187254); +#261891 = AXIS2_PLACEMENT_3D('',#261892,#261893,#261894); +#261892 = CARTESIAN_POINT('',(166.275,-130.775,-5.E-02)); +#261893 = DIRECTION('',(0.,0.,1.)); +#261894 = DIRECTION('',(1.,0.,-0.)); +#261895 = FACE_BOUND('',#261896,.T.); +#261896 = EDGE_LOOP('',(#261897)); +#261897 = ORIENTED_EDGE('',*,*,#261898,.T.); +#261898 = EDGE_CURVE('',#261899,#261899,#261901,.T.); +#261899 = VERTEX_POINT('',#261900); +#261900 = CARTESIAN_POINT('',(167.312254,-130.775,-5.E-02)); +#261901 = CIRCLE('',#261902,0.187254); +#261902 = AXIS2_PLACEMENT_3D('',#261903,#261904,#261905); +#261903 = CARTESIAN_POINT('',(167.125,-130.775,-5.E-02)); +#261904 = DIRECTION('',(0.,0.,1.)); +#261905 = DIRECTION('',(1.,0.,-0.)); +#261906 = FACE_BOUND('',#261907,.T.); +#261907 = EDGE_LOOP('',(#261908)); +#261908 = ORIENTED_EDGE('',*,*,#261909,.T.); +#261909 = EDGE_CURVE('',#261910,#261910,#261912,.T.); +#261910 = VERTEX_POINT('',#261911); +#261911 = CARTESIAN_POINT('',(115.739042,-129.5831,-5.E-02)); +#261912 = CIRCLE('',#261913,0.487392); +#261913 = AXIS2_PLACEMENT_3D('',#261914,#261915,#261916); +#261914 = CARTESIAN_POINT('',(115.25165,-129.5831,-5.E-02)); +#261915 = DIRECTION('',(0.,0.,1.)); +#261916 = DIRECTION('',(1.,0.,-0.)); +#261917 = FACE_BOUND('',#261918,.T.); +#261918 = EDGE_LOOP('',(#261919)); +#261919 = ORIENTED_EDGE('',*,*,#261920,.T.); +#261920 = EDGE_CURVE('',#261921,#261921,#261923,.T.); +#261921 = VERTEX_POINT('',#261922); +#261922 = CARTESIAN_POINT('',(118.279042,-129.5831,-5.E-02)); +#261923 = CIRCLE('',#261924,0.487392); +#261924 = AXIS2_PLACEMENT_3D('',#261925,#261926,#261927); +#261925 = CARTESIAN_POINT('',(117.79165,-129.5831,-5.E-02)); +#261926 = DIRECTION('',(0.,0.,1.)); +#261927 = DIRECTION('',(1.,0.,-0.)); +#261928 = FACE_BOUND('',#261929,.T.); +#261929 = EDGE_LOOP('',(#261930)); +#261930 = ORIENTED_EDGE('',*,*,#261931,.T.); +#261931 = EDGE_CURVE('',#261932,#261932,#261934,.T.); +#261932 = VERTEX_POINT('',#261933); +#261933 = CARTESIAN_POINT('',(120.819042,-129.5831,-5.E-02)); +#261934 = CIRCLE('',#261935,0.487392); +#261935 = AXIS2_PLACEMENT_3D('',#261936,#261937,#261938); +#261936 = CARTESIAN_POINT('',(120.33165,-129.5831,-5.E-02)); +#261937 = DIRECTION('',(0.,0.,1.)); +#261938 = DIRECTION('',(1.,0.,-0.)); +#261939 = FACE_BOUND('',#261940,.T.); +#261940 = EDGE_LOOP('',(#261941)); +#261941 = ORIENTED_EDGE('',*,*,#261942,.T.); +#261942 = EDGE_CURVE('',#261943,#261943,#261945,.T.); +#261943 = VERTEX_POINT('',#261944); +#261944 = CARTESIAN_POINT('',(123.359042,-129.5831,-5.E-02)); +#261945 = CIRCLE('',#261946,0.487392); +#261946 = AXIS2_PLACEMENT_3D('',#261947,#261948,#261949); +#261947 = CARTESIAN_POINT('',(122.87165,-129.5831,-5.E-02)); +#261948 = DIRECTION('',(0.,0.,1.)); +#261949 = DIRECTION('',(1.,0.,-0.)); +#261950 = FACE_BOUND('',#261951,.T.); +#261951 = EDGE_LOOP('',(#261952)); +#261952 = ORIENTED_EDGE('',*,*,#261953,.T.); +#261953 = EDGE_CURVE('',#261954,#261954,#261956,.T.); +#261954 = VERTEX_POINT('',#261955); +#261955 = CARTESIAN_POINT('',(125.899042,-129.5831,-5.E-02)); +#261956 = CIRCLE('',#261957,0.487392); +#261957 = AXIS2_PLACEMENT_3D('',#261958,#261959,#261960); +#261958 = CARTESIAN_POINT('',(125.41165,-129.5831,-5.E-02)); +#261959 = DIRECTION('',(0.,0.,1.)); +#261960 = DIRECTION('',(1.,0.,-0.)); +#261961 = FACE_BOUND('',#261962,.T.); +#261962 = EDGE_LOOP('',(#261963)); +#261963 = ORIENTED_EDGE('',*,*,#261964,.T.); +#261964 = EDGE_CURVE('',#261965,#261965,#261967,.T.); +#261965 = VERTEX_POINT('',#261966); +#261966 = CARTESIAN_POINT('',(128.439042,-129.5831,-5.E-02)); +#261967 = CIRCLE('',#261968,0.487392); +#261968 = AXIS2_PLACEMENT_3D('',#261969,#261970,#261971); +#261969 = CARTESIAN_POINT('',(127.95165,-129.5831,-5.E-02)); +#261970 = DIRECTION('',(0.,0.,1.)); +#261971 = DIRECTION('',(1.,0.,-0.)); +#261972 = FACE_BOUND('',#261973,.T.); +#261973 = EDGE_LOOP('',(#261974)); +#261974 = ORIENTED_EDGE('',*,*,#261975,.T.); +#261975 = EDGE_CURVE('',#261976,#261976,#261978,.T.); +#261976 = VERTEX_POINT('',#261977); +#261977 = CARTESIAN_POINT('',(130.979042,-129.5831,-5.E-02)); +#261978 = CIRCLE('',#261979,0.487392); +#261979 = AXIS2_PLACEMENT_3D('',#261980,#261981,#261982); +#261980 = CARTESIAN_POINT('',(130.49165,-129.5831,-5.E-02)); +#261981 = DIRECTION('',(0.,0.,1.)); +#261982 = DIRECTION('',(1.,0.,-0.)); +#261983 = FACE_BOUND('',#261984,.T.); +#261984 = EDGE_LOOP('',(#261985)); +#261985 = ORIENTED_EDGE('',*,*,#261986,.T.); +#261986 = EDGE_CURVE('',#261987,#261987,#261989,.T.); +#261987 = VERTEX_POINT('',#261988); +#261988 = CARTESIAN_POINT('',(133.519042,-129.5831,-5.E-02)); +#261989 = CIRCLE('',#261990,0.487392); +#261990 = AXIS2_PLACEMENT_3D('',#261991,#261992,#261993); +#261991 = CARTESIAN_POINT('',(133.03165,-129.5831,-5.E-02)); +#261992 = DIRECTION('',(0.,0.,1.)); +#261993 = DIRECTION('',(1.,0.,-0.)); +#261994 = FACE_BOUND('',#261995,.T.); +#261995 = EDGE_LOOP('',(#261996)); +#261996 = ORIENTED_EDGE('',*,*,#261997,.T.); +#261997 = EDGE_CURVE('',#261998,#261998,#262000,.T.); +#261998 = VERTEX_POINT('',#261999); +#261999 = CARTESIAN_POINT('',(138.599042,-129.5831,-5.E-02)); +#262000 = CIRCLE('',#262001,0.487392); +#262001 = AXIS2_PLACEMENT_3D('',#262002,#262003,#262004); +#262002 = CARTESIAN_POINT('',(138.11165,-129.5831,-5.E-02)); +#262003 = DIRECTION('',(0.,0.,1.)); +#262004 = DIRECTION('',(1.,0.,-0.)); +#262005 = FACE_BOUND('',#262006,.T.); +#262006 = EDGE_LOOP('',(#262007)); +#262007 = ORIENTED_EDGE('',*,*,#262008,.T.); +#262008 = EDGE_CURVE('',#262009,#262009,#262011,.T.); +#262009 = VERTEX_POINT('',#262010); +#262010 = CARTESIAN_POINT('',(141.139042,-129.5831,-5.E-02)); +#262011 = CIRCLE('',#262012,0.487392); +#262012 = AXIS2_PLACEMENT_3D('',#262013,#262014,#262015); +#262013 = CARTESIAN_POINT('',(140.65165,-129.5831,-5.E-02)); +#262014 = DIRECTION('',(0.,0.,1.)); +#262015 = DIRECTION('',(1.,0.,-0.)); +#262016 = FACE_BOUND('',#262017,.T.); +#262017 = EDGE_LOOP('',(#262018)); +#262018 = ORIENTED_EDGE('',*,*,#262019,.T.); +#262019 = EDGE_CURVE('',#262020,#262020,#262022,.T.); +#262020 = VERTEX_POINT('',#262021); +#262021 = CARTESIAN_POINT('',(143.679042,-129.5831,-5.E-02)); +#262022 = CIRCLE('',#262023,0.487392); +#262023 = AXIS2_PLACEMENT_3D('',#262024,#262025,#262026); +#262024 = CARTESIAN_POINT('',(143.19165,-129.5831,-5.E-02)); +#262025 = DIRECTION('',(0.,0.,1.)); +#262026 = DIRECTION('',(1.,0.,-0.)); +#262027 = FACE_BOUND('',#262028,.T.); +#262028 = EDGE_LOOP('',(#262029)); +#262029 = ORIENTED_EDGE('',*,*,#262030,.T.); +#262030 = EDGE_CURVE('',#262031,#262031,#262033,.T.); +#262031 = VERTEX_POINT('',#262032); +#262032 = CARTESIAN_POINT('',(146.219042,-129.5831,-5.E-02)); +#262033 = CIRCLE('',#262034,0.487392); +#262034 = AXIS2_PLACEMENT_3D('',#262035,#262036,#262037); +#262035 = CARTESIAN_POINT('',(145.73165,-129.5831,-5.E-02)); +#262036 = DIRECTION('',(0.,0.,1.)); +#262037 = DIRECTION('',(1.,0.,-0.)); +#262038 = FACE_BOUND('',#262039,.T.); +#262039 = EDGE_LOOP('',(#262040)); +#262040 = ORIENTED_EDGE('',*,*,#262041,.T.); +#262041 = EDGE_CURVE('',#262042,#262042,#262044,.T.); +#262042 = VERTEX_POINT('',#262043); +#262043 = CARTESIAN_POINT('',(148.759042,-129.5831,-5.E-02)); +#262044 = CIRCLE('',#262045,0.487392); +#262045 = AXIS2_PLACEMENT_3D('',#262046,#262047,#262048); +#262046 = CARTESIAN_POINT('',(148.27165,-129.5831,-5.E-02)); +#262047 = DIRECTION('',(0.,0.,1.)); +#262048 = DIRECTION('',(1.,0.,-0.)); +#262049 = FACE_BOUND('',#262050,.T.); +#262050 = EDGE_LOOP('',(#262051)); +#262051 = ORIENTED_EDGE('',*,*,#262052,.T.); +#262052 = EDGE_CURVE('',#262053,#262053,#262055,.T.); +#262053 = VERTEX_POINT('',#262054); +#262054 = CARTESIAN_POINT('',(151.299042,-129.5831,-5.E-02)); +#262055 = CIRCLE('',#262056,0.487392); +#262056 = AXIS2_PLACEMENT_3D('',#262057,#262058,#262059); +#262057 = CARTESIAN_POINT('',(150.81165,-129.5831,-5.E-02)); +#262058 = DIRECTION('',(0.,0.,1.)); +#262059 = DIRECTION('',(1.,0.,-0.)); +#262060 = FACE_BOUND('',#262061,.T.); +#262061 = EDGE_LOOP('',(#262062)); +#262062 = ORIENTED_EDGE('',*,*,#262063,.T.); +#262063 = EDGE_CURVE('',#262064,#262064,#262066,.T.); +#262064 = VERTEX_POINT('',#262065); +#262065 = CARTESIAN_POINT('',(161.362254,-129.425,-5.E-02)); +#262066 = CIRCLE('',#262067,0.187254); +#262067 = AXIS2_PLACEMENT_3D('',#262068,#262069,#262070); +#262068 = CARTESIAN_POINT('',(161.175,-129.425,-5.E-02)); +#262069 = DIRECTION('',(0.,0.,1.)); +#262070 = DIRECTION('',(1.,0.,-0.)); +#262071 = FACE_BOUND('',#262072,.T.); +#262072 = EDGE_LOOP('',(#262073)); +#262073 = ORIENTED_EDGE('',*,*,#262074,.T.); +#262074 = EDGE_CURVE('',#262075,#262075,#262077,.T.); +#262075 = VERTEX_POINT('',#262076); +#262076 = CARTESIAN_POINT('',(162.212254,-129.425,-5.E-02)); +#262077 = CIRCLE('',#262078,0.187254); +#262078 = AXIS2_PLACEMENT_3D('',#262079,#262080,#262081); +#262079 = CARTESIAN_POINT('',(162.025,-129.425,-5.E-02)); +#262080 = DIRECTION('',(0.,0.,1.)); +#262081 = DIRECTION('',(1.,0.,-0.)); +#262082 = FACE_BOUND('',#262083,.T.); +#262083 = EDGE_LOOP('',(#262084)); +#262084 = ORIENTED_EDGE('',*,*,#262085,.T.); +#262085 = EDGE_CURVE('',#262086,#262086,#262088,.T.); +#262086 = VERTEX_POINT('',#262087); +#262087 = CARTESIAN_POINT('',(163.062254,-129.425,-5.E-02)); +#262088 = CIRCLE('',#262089,0.187254); +#262089 = AXIS2_PLACEMENT_3D('',#262090,#262091,#262092); +#262090 = CARTESIAN_POINT('',(162.875,-129.425,-5.E-02)); +#262091 = DIRECTION('',(0.,0.,1.)); +#262092 = DIRECTION('',(1.,0.,-0.)); +#262093 = FACE_BOUND('',#262094,.T.); +#262094 = EDGE_LOOP('',(#262095)); +#262095 = ORIENTED_EDGE('',*,*,#262096,.T.); +#262096 = EDGE_CURVE('',#262097,#262097,#262099,.T.); +#262097 = VERTEX_POINT('',#262098); +#262098 = CARTESIAN_POINT('',(163.912254,-129.425,-5.E-02)); +#262099 = CIRCLE('',#262100,0.187254); +#262100 = AXIS2_PLACEMENT_3D('',#262101,#262102,#262103); +#262101 = CARTESIAN_POINT('',(163.725,-129.425,-5.E-02)); +#262102 = DIRECTION('',(0.,0.,1.)); +#262103 = DIRECTION('',(1.,0.,-0.)); +#262104 = FACE_BOUND('',#262105,.T.); +#262105 = EDGE_LOOP('',(#262106)); +#262106 = ORIENTED_EDGE('',*,*,#262107,.T.); +#262107 = EDGE_CURVE('',#262108,#262108,#262110,.T.); +#262108 = VERTEX_POINT('',#262109); +#262109 = CARTESIAN_POINT('',(164.762254,-129.425,-5.E-02)); +#262110 = CIRCLE('',#262111,0.187254); +#262111 = AXIS2_PLACEMENT_3D('',#262112,#262113,#262114); +#262112 = CARTESIAN_POINT('',(164.575,-129.425,-5.E-02)); +#262113 = DIRECTION('',(0.,0.,1.)); +#262114 = DIRECTION('',(1.,0.,-0.)); +#262115 = FACE_BOUND('',#262116,.T.); +#262116 = EDGE_LOOP('',(#262117)); +#262117 = ORIENTED_EDGE('',*,*,#262118,.T.); +#262118 = EDGE_CURVE('',#262119,#262119,#262121,.T.); +#262119 = VERTEX_POINT('',#262120); +#262120 = CARTESIAN_POINT('',(165.612254,-129.425,-5.E-02)); +#262121 = CIRCLE('',#262122,0.187254); +#262122 = AXIS2_PLACEMENT_3D('',#262123,#262124,#262125); +#262123 = CARTESIAN_POINT('',(165.425,-129.425,-5.E-02)); +#262124 = DIRECTION('',(0.,0.,1.)); +#262125 = DIRECTION('',(1.,0.,-0.)); +#262126 = FACE_BOUND('',#262127,.T.); +#262127 = EDGE_LOOP('',(#262128)); +#262128 = ORIENTED_EDGE('',*,*,#262129,.T.); +#262129 = EDGE_CURVE('',#262130,#262130,#262132,.T.); +#262130 = VERTEX_POINT('',#262131); +#262131 = CARTESIAN_POINT('',(166.462254,-129.425,-5.E-02)); +#262132 = CIRCLE('',#262133,0.187254); +#262133 = AXIS2_PLACEMENT_3D('',#262134,#262135,#262136); +#262134 = CARTESIAN_POINT('',(166.275,-129.425,-5.E-02)); +#262135 = DIRECTION('',(0.,0.,1.)); +#262136 = DIRECTION('',(1.,0.,-0.)); +#262137 = FACE_BOUND('',#262138,.T.); +#262138 = EDGE_LOOP('',(#262139)); +#262139 = ORIENTED_EDGE('',*,*,#262140,.T.); +#262140 = EDGE_CURVE('',#262141,#262141,#262143,.T.); +#262141 = VERTEX_POINT('',#262142); +#262142 = CARTESIAN_POINT('',(167.312254,-129.425,-5.E-02)); +#262143 = CIRCLE('',#262144,0.187254); +#262144 = AXIS2_PLACEMENT_3D('',#262145,#262146,#262147); +#262145 = CARTESIAN_POINT('',(167.125,-129.425,-5.E-02)); +#262146 = DIRECTION('',(0.,0.,1.)); +#262147 = DIRECTION('',(1.,0.,-0.)); +#262148 = FACE_BOUND('',#262149,.T.); +#262149 = EDGE_LOOP('',(#262150)); +#262150 = ORIENTED_EDGE('',*,*,#262151,.T.); +#262151 = EDGE_CURVE('',#262152,#262152,#262154,.T.); +#262152 = VERTEX_POINT('',#262153); +#262153 = CARTESIAN_POINT('',(210.679042,-121.3231,-5.E-02)); +#262154 = CIRCLE('',#262155,0.487392); +#262155 = AXIS2_PLACEMENT_3D('',#262156,#262157,#262158); +#262156 = CARTESIAN_POINT('',(210.19165,-121.3231,-5.E-02)); +#262157 = DIRECTION('',(0.,0.,1.)); +#262158 = DIRECTION('',(1.,0.,-0.)); +#262159 = FACE_BOUND('',#262160,.T.); +#262160 = EDGE_LOOP('',(#262161)); +#262161 = ORIENTED_EDGE('',*,*,#262162,.T.); +#262162 = EDGE_CURVE('',#262163,#262163,#262165,.T.); +#262163 = VERTEX_POINT('',#262164); +#262164 = CARTESIAN_POINT('',(210.679042,-118.8231,-5.E-02)); +#262165 = CIRCLE('',#262166,0.487392); +#262166 = AXIS2_PLACEMENT_3D('',#262167,#262168,#262169); +#262167 = CARTESIAN_POINT('',(210.19165,-118.8231,-5.E-02)); +#262168 = DIRECTION('',(0.,0.,1.)); +#262169 = DIRECTION('',(1.,0.,-0.)); +#262170 = FACE_BOUND('',#262171,.T.); +#262171 = EDGE_LOOP('',(#262172)); +#262172 = ORIENTED_EDGE('',*,*,#262173,.T.); +#262173 = EDGE_CURVE('',#262174,#262174,#262176,.T.); +#262174 = VERTEX_POINT('',#262175); +#262175 = CARTESIAN_POINT('',(210.654042,-108.3231,-5.E-02)); +#262176 = CIRCLE('',#262177,0.462392); +#262177 = AXIS2_PLACEMENT_3D('',#262178,#262179,#262180); +#262178 = CARTESIAN_POINT('',(210.19165,-108.3231,-5.E-02)); +#262179 = DIRECTION('',(0.,0.,1.)); +#262180 = DIRECTION('',(1.,0.,-0.)); +#262181 = FACE_BOUND('',#262182,.T.); +#262182 = EDGE_LOOP('',(#262183)); +#262183 = ORIENTED_EDGE('',*,*,#262184,.T.); +#262184 = EDGE_CURVE('',#262185,#262185,#262187,.T.); +#262185 = VERTEX_POINT('',#262186); +#262186 = CARTESIAN_POINT('',(210.654042,-105.8231,-5.E-02)); +#262187 = CIRCLE('',#262188,0.462392); +#262188 = AXIS2_PLACEMENT_3D('',#262189,#262190,#262191); +#262189 = CARTESIAN_POINT('',(210.19165,-105.8231,-5.E-02)); +#262190 = DIRECTION('',(0.,0.,1.)); +#262191 = DIRECTION('',(1.,0.,-0.)); +#262192 = FACE_BOUND('',#262193,.T.); +#262193 = EDGE_LOOP('',(#262194)); +#262194 = ORIENTED_EDGE('',*,*,#262195,.T.); +#262195 = EDGE_CURVE('',#262196,#262196,#262198,.T.); +#262196 = VERTEX_POINT('',#262197); +#262197 = CARTESIAN_POINT('',(210.654042,-103.3231,-5.E-02)); +#262198 = CIRCLE('',#262199,0.462392); +#262199 = AXIS2_PLACEMENT_3D('',#262200,#262201,#262202); +#262200 = CARTESIAN_POINT('',(210.19165,-103.3231,-5.E-02)); +#262201 = DIRECTION('',(0.,0.,1.)); +#262202 = DIRECTION('',(1.,0.,-0.)); +#262203 = FACE_BOUND('',#262204,.T.); +#262204 = EDGE_LOOP('',(#262205)); +#262205 = ORIENTED_EDGE('',*,*,#262206,.T.); +#262206 = EDGE_CURVE('',#262207,#262207,#262209,.T.); +#262207 = VERTEX_POINT('',#262208); +#262208 = CARTESIAN_POINT('',(210.654042,-95.3231,-5.E-02)); +#262209 = CIRCLE('',#262210,0.462392); +#262210 = AXIS2_PLACEMENT_3D('',#262211,#262212,#262213); +#262211 = CARTESIAN_POINT('',(210.19165,-95.3231,-5.E-02)); +#262212 = DIRECTION('',(0.,0.,1.)); +#262213 = DIRECTION('',(1.,0.,-0.)); +#262214 = FACE_BOUND('',#262215,.T.); +#262215 = EDGE_LOOP('',(#262216)); +#262216 = ORIENTED_EDGE('',*,*,#262217,.T.); +#262217 = EDGE_CURVE('',#262218,#262218,#262220,.T.); +#262218 = VERTEX_POINT('',#262219); +#262219 = CARTESIAN_POINT('',(210.654042,-92.8231,-5.E-02)); +#262220 = CIRCLE('',#262221,0.462392); +#262221 = AXIS2_PLACEMENT_3D('',#262222,#262223,#262224); +#262222 = CARTESIAN_POINT('',(210.19165,-92.8231,-5.E-02)); +#262223 = DIRECTION('',(0.,0.,1.)); +#262224 = DIRECTION('',(1.,0.,-0.)); +#262225 = FACE_BOUND('',#262226,.T.); +#262226 = EDGE_LOOP('',(#262227)); +#262227 = ORIENTED_EDGE('',*,*,#262228,.T.); +#262228 = EDGE_CURVE('',#262229,#262229,#262231,.T.); +#262229 = VERTEX_POINT('',#262230); +#262230 = CARTESIAN_POINT('',(174.579042,-92.8231,-5.E-02)); +#262231 = CIRCLE('',#262232,0.387392); +#262232 = AXIS2_PLACEMENT_3D('',#262233,#262234,#262235); +#262233 = CARTESIAN_POINT('',(174.19165,-92.8231,-5.E-02)); +#262234 = DIRECTION('',(0.,0.,1.)); +#262235 = DIRECTION('',(1.,0.,-0.)); +#262236 = FACE_BOUND('',#262237,.T.); +#262237 = EDGE_LOOP('',(#262238)); +#262238 = ORIENTED_EDGE('',*,*,#262239,.T.); +#262239 = EDGE_CURVE('',#262240,#262240,#262242,.T.); +#262240 = VERTEX_POINT('',#262241); +#262241 = CARTESIAN_POINT('',(196.929042,-92.8231,-5.E-02)); +#262242 = CIRCLE('',#262243,0.387392); +#262243 = AXIS2_PLACEMENT_3D('',#262244,#262245,#262246); +#262244 = CARTESIAN_POINT('',(196.54165,-92.8231,-5.E-02)); +#262245 = DIRECTION('',(0.,0.,1.)); +#262246 = DIRECTION('',(1.,0.,-0.)); +#262247 = FACE_BOUND('',#262248,.T.); +#262248 = EDGE_LOOP('',(#262249)); +#262249 = ORIENTED_EDGE('',*,*,#262250,.T.); +#262250 = EDGE_CURVE('',#262251,#262251,#262253,.T.); +#262251 = VERTEX_POINT('',#262252); +#262252 = CARTESIAN_POINT('',(174.579042,-90.8231,-5.E-02)); +#262253 = CIRCLE('',#262254,0.387392); +#262254 = AXIS2_PLACEMENT_3D('',#262255,#262256,#262257); +#262255 = CARTESIAN_POINT('',(174.19165,-90.8231,-5.E-02)); +#262256 = DIRECTION('',(0.,0.,1.)); +#262257 = DIRECTION('',(1.,0.,-0.)); +#262258 = FACE_BOUND('',#262259,.T.); +#262259 = EDGE_LOOP('',(#262260)); +#262260 = ORIENTED_EDGE('',*,*,#262261,.T.); +#262261 = EDGE_CURVE('',#262262,#262262,#262264,.T.); +#262262 = VERTEX_POINT('',#262263); +#262263 = CARTESIAN_POINT('',(196.929042,-90.8231,-5.E-02)); +#262264 = CIRCLE('',#262265,0.387392); +#262265 = AXIS2_PLACEMENT_3D('',#262266,#262267,#262268); +#262266 = CARTESIAN_POINT('',(196.54165,-90.8231,-5.E-02)); +#262267 = DIRECTION('',(0.,0.,1.)); +#262268 = DIRECTION('',(1.,0.,-0.)); +#262269 = FACE_BOUND('',#262270,.T.); +#262270 = EDGE_LOOP('',(#262271)); +#262271 = ORIENTED_EDGE('',*,*,#262272,.T.); +#262272 = EDGE_CURVE('',#262273,#262273,#262275,.T.); +#262273 = VERTEX_POINT('',#262274); +#262274 = CARTESIAN_POINT('',(210.654042,-90.3231,-5.E-02)); +#262275 = CIRCLE('',#262276,0.462392); +#262276 = AXIS2_PLACEMENT_3D('',#262277,#262278,#262279); +#262277 = CARTESIAN_POINT('',(210.19165,-90.3231,-5.E-02)); +#262278 = DIRECTION('',(0.,0.,1.)); +#262279 = DIRECTION('',(1.,0.,-0.)); +#262280 = FACE_BOUND('',#262281,.T.); +#262281 = EDGE_LOOP('',(#262282)); +#262282 = ORIENTED_EDGE('',*,*,#262283,.T.); +#262283 = EDGE_CURVE('',#262284,#262284,#262286,.T.); +#262284 = VERTEX_POINT('',#262285); +#262285 = CARTESIAN_POINT('',(174.579042,-88.8231,-5.E-02)); +#262286 = CIRCLE('',#262287,0.387392); +#262287 = AXIS2_PLACEMENT_3D('',#262288,#262289,#262290); +#262288 = CARTESIAN_POINT('',(174.19165,-88.8231,-5.E-02)); +#262289 = DIRECTION('',(0.,0.,1.)); +#262290 = DIRECTION('',(1.,0.,-0.)); +#262291 = FACE_BOUND('',#262292,.T.); +#262292 = EDGE_LOOP('',(#262293)); +#262293 = ORIENTED_EDGE('',*,*,#262294,.T.); +#262294 = EDGE_CURVE('',#262295,#262295,#262297,.T.); +#262295 = VERTEX_POINT('',#262296); +#262296 = CARTESIAN_POINT('',(196.929042,-88.8231,-5.E-02)); +#262297 = CIRCLE('',#262298,0.387392); +#262298 = AXIS2_PLACEMENT_3D('',#262299,#262300,#262301); +#262299 = CARTESIAN_POINT('',(196.54165,-88.8231,-5.E-02)); +#262300 = DIRECTION('',(0.,0.,1.)); +#262301 = DIRECTION('',(1.,0.,-0.)); +#262302 = FACE_BOUND('',#262303,.T.); +#262303 = EDGE_LOOP('',(#262304)); +#262304 = ORIENTED_EDGE('',*,*,#262305,.T.); +#262305 = EDGE_CURVE('',#262306,#262306,#262308,.T.); +#262306 = VERTEX_POINT('',#262307); +#262307 = CARTESIAN_POINT('',(210.654042,-87.8231,-5.E-02)); +#262308 = CIRCLE('',#262309,0.462392); +#262309 = AXIS2_PLACEMENT_3D('',#262310,#262311,#262312); +#262310 = CARTESIAN_POINT('',(210.19165,-87.8231,-5.E-02)); +#262311 = DIRECTION('',(0.,0.,1.)); +#262312 = DIRECTION('',(1.,0.,-0.)); +#262313 = FACE_BOUND('',#262314,.T.); +#262314 = EDGE_LOOP('',(#262315)); +#262315 = ORIENTED_EDGE('',*,*,#262316,.T.); +#262316 = EDGE_CURVE('',#262317,#262317,#262319,.T.); +#262317 = VERTEX_POINT('',#262318); +#262318 = CARTESIAN_POINT('',(174.579042,-86.8231,-5.E-02)); +#262319 = CIRCLE('',#262320,0.387392); +#262320 = AXIS2_PLACEMENT_3D('',#262321,#262322,#262323); +#262321 = CARTESIAN_POINT('',(174.19165,-86.8231,-5.E-02)); +#262322 = DIRECTION('',(0.,0.,1.)); +#262323 = DIRECTION('',(1.,0.,-0.)); +#262324 = FACE_BOUND('',#262325,.T.); +#262325 = EDGE_LOOP('',(#262326)); +#262326 = ORIENTED_EDGE('',*,*,#262327,.T.); +#262327 = EDGE_CURVE('',#262328,#262328,#262330,.T.); +#262328 = VERTEX_POINT('',#262329); +#262329 = CARTESIAN_POINT('',(196.929042,-86.8231,-5.E-02)); +#262330 = CIRCLE('',#262331,0.387392); +#262331 = AXIS2_PLACEMENT_3D('',#262332,#262333,#262334); +#262332 = CARTESIAN_POINT('',(196.54165,-86.8231,-5.E-02)); +#262333 = DIRECTION('',(0.,0.,1.)); +#262334 = DIRECTION('',(1.,0.,-0.)); +#262335 = FACE_BOUND('',#262336,.T.); +#262336 = EDGE_LOOP('',(#262337)); +#262337 = ORIENTED_EDGE('',*,*,#262338,.T.); +#262338 = EDGE_CURVE('',#262339,#262339,#262341,.T.); +#262339 = VERTEX_POINT('',#262340); +#262340 = CARTESIAN_POINT('',(174.579042,-84.8231,-5.E-02)); +#262341 = CIRCLE('',#262342,0.387392); +#262342 = AXIS2_PLACEMENT_3D('',#262343,#262344,#262345); +#262343 = CARTESIAN_POINT('',(174.19165,-84.8231,-5.E-02)); +#262344 = DIRECTION('',(0.,0.,1.)); +#262345 = DIRECTION('',(1.,0.,-0.)); +#262346 = FACE_BOUND('',#262347,.T.); +#262347 = EDGE_LOOP('',(#262348)); +#262348 = ORIENTED_EDGE('',*,*,#262349,.T.); +#262349 = EDGE_CURVE('',#262350,#262350,#262352,.T.); +#262350 = VERTEX_POINT('',#262351); +#262351 = CARTESIAN_POINT('',(196.929042,-84.8231,-5.E-02)); +#262352 = CIRCLE('',#262353,0.387392); +#262353 = AXIS2_PLACEMENT_3D('',#262354,#262355,#262356); +#262354 = CARTESIAN_POINT('',(196.54165,-84.8231,-5.E-02)); +#262355 = DIRECTION('',(0.,0.,1.)); +#262356 = DIRECTION('',(1.,0.,-0.)); +#262357 = FACE_BOUND('',#262358,.T.); +#262358 = EDGE_LOOP('',(#262359)); +#262359 = ORIENTED_EDGE('',*,*,#262360,.T.); +#262360 = EDGE_CURVE('',#262361,#262361,#262363,.T.); +#262361 = VERTEX_POINT('',#262362); +#262362 = CARTESIAN_POINT('',(174.579042,-82.8231,-5.E-02)); +#262363 = CIRCLE('',#262364,0.387392); +#262364 = AXIS2_PLACEMENT_3D('',#262365,#262366,#262367); +#262365 = CARTESIAN_POINT('',(174.19165,-82.8231,-5.E-02)); +#262366 = DIRECTION('',(0.,0.,1.)); +#262367 = DIRECTION('',(1.,0.,-0.)); +#262368 = FACE_BOUND('',#262369,.T.); +#262369 = EDGE_LOOP('',(#262370)); +#262370 = ORIENTED_EDGE('',*,*,#262371,.T.); +#262371 = EDGE_CURVE('',#262372,#262372,#262374,.T.); +#262372 = VERTEX_POINT('',#262373); +#262373 = CARTESIAN_POINT('',(196.929042,-82.8231,-5.E-02)); +#262374 = CIRCLE('',#262375,0.387392); +#262375 = AXIS2_PLACEMENT_3D('',#262376,#262377,#262378); +#262376 = CARTESIAN_POINT('',(196.54165,-82.8231,-5.E-02)); +#262377 = DIRECTION('',(0.,0.,1.)); +#262378 = DIRECTION('',(1.,0.,-0.)); +#262379 = FACE_BOUND('',#262380,.T.); +#262380 = EDGE_LOOP('',(#262381)); +#262381 = ORIENTED_EDGE('',*,*,#262382,.T.); +#262382 = EDGE_CURVE('',#262383,#262383,#262385,.T.); +#262383 = VERTEX_POINT('',#262384); +#262384 = CARTESIAN_POINT('',(106.599042,-81.3231,-5.E-02)); +#262385 = CIRCLE('',#262386,0.487392); +#262386 = AXIS2_PLACEMENT_3D('',#262387,#262388,#262389); +#262387 = CARTESIAN_POINT('',(106.11165,-81.3231,-5.E-02)); +#262388 = DIRECTION('',(0.,0.,1.)); +#262389 = DIRECTION('',(1.,0.,-0.)); +#262390 = FACE_BOUND('',#262391,.T.); +#262391 = EDGE_LOOP('',(#262392)); +#262392 = ORIENTED_EDGE('',*,*,#262393,.T.); +#262393 = EDGE_CURVE('',#262394,#262394,#262396,.T.); +#262394 = VERTEX_POINT('',#262395); +#262395 = CARTESIAN_POINT('',(109.139042,-81.3231,-5.E-02)); +#262396 = CIRCLE('',#262397,0.487392); +#262397 = AXIS2_PLACEMENT_3D('',#262398,#262399,#262400); +#262398 = CARTESIAN_POINT('',(108.65165,-81.3231,-5.E-02)); +#262399 = DIRECTION('',(0.,0.,1.)); +#262400 = DIRECTION('',(1.,0.,-0.)); +#262401 = FACE_BOUND('',#262402,.T.); +#262402 = EDGE_LOOP('',(#262403)); +#262403 = ORIENTED_EDGE('',*,*,#262404,.T.); +#262404 = EDGE_CURVE('',#262405,#262405,#262407,.T.); +#262405 = VERTEX_POINT('',#262406); +#262406 = CARTESIAN_POINT('',(111.679042,-81.3231,-5.E-02)); +#262407 = CIRCLE('',#262408,0.487392); +#262408 = AXIS2_PLACEMENT_3D('',#262409,#262410,#262411); +#262409 = CARTESIAN_POINT('',(111.19165,-81.3231,-5.E-02)); +#262410 = DIRECTION('',(0.,0.,1.)); +#262411 = DIRECTION('',(1.,0.,-0.)); +#262412 = FACE_BOUND('',#262413,.T.); +#262413 = EDGE_LOOP('',(#262414)); +#262414 = ORIENTED_EDGE('',*,*,#262415,.T.); +#262415 = EDGE_CURVE('',#262416,#262416,#262418,.T.); +#262416 = VERTEX_POINT('',#262417); +#262417 = CARTESIAN_POINT('',(114.219042,-81.3231,-5.E-02)); +#262418 = CIRCLE('',#262419,0.487392); +#262419 = AXIS2_PLACEMENT_3D('',#262420,#262421,#262422); +#262420 = CARTESIAN_POINT('',(113.73165,-81.3231,-5.E-02)); +#262421 = DIRECTION('',(0.,0.,1.)); +#262422 = DIRECTION('',(1.,0.,-0.)); +#262423 = FACE_BOUND('',#262424,.T.); +#262424 = EDGE_LOOP('',(#262425)); +#262425 = ORIENTED_EDGE('',*,*,#262426,.T.); +#262426 = EDGE_CURVE('',#262427,#262427,#262429,.T.); +#262427 = VERTEX_POINT('',#262428); +#262428 = CARTESIAN_POINT('',(116.759042,-81.3231,-5.E-02)); +#262429 = CIRCLE('',#262430,0.487392); +#262430 = AXIS2_PLACEMENT_3D('',#262431,#262432,#262433); +#262431 = CARTESIAN_POINT('',(116.27165,-81.3231,-5.E-02)); +#262432 = DIRECTION('',(0.,0.,1.)); +#262433 = DIRECTION('',(1.,0.,-0.)); +#262434 = FACE_BOUND('',#262435,.T.); +#262435 = EDGE_LOOP('',(#262436)); +#262436 = ORIENTED_EDGE('',*,*,#262437,.T.); +#262437 = EDGE_CURVE('',#262438,#262438,#262440,.T.); +#262438 = VERTEX_POINT('',#262439); +#262439 = CARTESIAN_POINT('',(119.299042,-81.3231,-5.E-02)); +#262440 = CIRCLE('',#262441,0.487392); +#262441 = AXIS2_PLACEMENT_3D('',#262442,#262443,#262444); +#262442 = CARTESIAN_POINT('',(118.81165,-81.3231,-5.E-02)); +#262443 = DIRECTION('',(0.,0.,1.)); +#262444 = DIRECTION('',(1.,0.,-0.)); +#262445 = FACE_BOUND('',#262446,.T.); +#262446 = EDGE_LOOP('',(#262447)); +#262447 = ORIENTED_EDGE('',*,*,#262448,.T.); +#262448 = EDGE_CURVE('',#262449,#262449,#262451,.T.); +#262449 = VERTEX_POINT('',#262450); +#262450 = CARTESIAN_POINT('',(121.839042,-81.3231,-5.E-02)); +#262451 = CIRCLE('',#262452,0.487392); +#262452 = AXIS2_PLACEMENT_3D('',#262453,#262454,#262455); +#262453 = CARTESIAN_POINT('',(121.35165,-81.3231,-5.E-02)); +#262454 = DIRECTION('',(0.,0.,1.)); +#262455 = DIRECTION('',(1.,0.,-0.)); +#262456 = FACE_BOUND('',#262457,.T.); +#262457 = EDGE_LOOP('',(#262458)); +#262458 = ORIENTED_EDGE('',*,*,#262459,.T.); +#262459 = EDGE_CURVE('',#262460,#262460,#262462,.T.); +#262460 = VERTEX_POINT('',#262461); +#262461 = CARTESIAN_POINT('',(124.379042,-81.3231,-5.E-02)); +#262462 = CIRCLE('',#262463,0.487392); +#262463 = AXIS2_PLACEMENT_3D('',#262464,#262465,#262466); +#262464 = CARTESIAN_POINT('',(123.89165,-81.3231,-5.E-02)); +#262465 = DIRECTION('',(0.,0.,1.)); +#262466 = DIRECTION('',(1.,0.,-0.)); +#262467 = FACE_BOUND('',#262468,.T.); +#262468 = EDGE_LOOP('',(#262469)); +#262469 = ORIENTED_EDGE('',*,*,#262470,.T.); +#262470 = EDGE_CURVE('',#262471,#262471,#262473,.T.); +#262471 = VERTEX_POINT('',#262472); +#262472 = CARTESIAN_POINT('',(126.919042,-81.3231,-5.E-02)); +#262473 = CIRCLE('',#262474,0.487392); +#262474 = AXIS2_PLACEMENT_3D('',#262475,#262476,#262477); +#262475 = CARTESIAN_POINT('',(126.43165,-81.3231,-5.E-02)); +#262476 = DIRECTION('',(0.,0.,1.)); +#262477 = DIRECTION('',(1.,0.,-0.)); +#262478 = FACE_BOUND('',#262479,.T.); +#262479 = EDGE_LOOP('',(#262480)); +#262480 = ORIENTED_EDGE('',*,*,#262481,.T.); +#262481 = EDGE_CURVE('',#262482,#262482,#262484,.T.); +#262482 = VERTEX_POINT('',#262483); +#262483 = CARTESIAN_POINT('',(129.459042,-81.3231,-5.E-02)); +#262484 = CIRCLE('',#262485,0.487392); +#262485 = AXIS2_PLACEMENT_3D('',#262486,#262487,#262488); +#262486 = CARTESIAN_POINT('',(128.97165,-81.3231,-5.E-02)); +#262487 = DIRECTION('',(0.,0.,1.)); +#262488 = DIRECTION('',(1.,0.,-0.)); +#262489 = FACE_BOUND('',#262490,.T.); +#262490 = EDGE_LOOP('',(#262491)); +#262491 = ORIENTED_EDGE('',*,*,#262492,.T.); +#262492 = EDGE_CURVE('',#262493,#262493,#262495,.T.); +#262493 = VERTEX_POINT('',#262494); +#262494 = CARTESIAN_POINT('',(133.519042,-81.3231,-5.E-02)); +#262495 = CIRCLE('',#262496,0.487392); +#262496 = AXIS2_PLACEMENT_3D('',#262497,#262498,#262499); +#262497 = CARTESIAN_POINT('',(133.03165,-81.3231,-5.E-02)); +#262498 = DIRECTION('',(0.,0.,1.)); +#262499 = DIRECTION('',(1.,0.,-0.)); +#262500 = FACE_BOUND('',#262501,.T.); +#262501 = EDGE_LOOP('',(#262502)); +#262502 = ORIENTED_EDGE('',*,*,#262503,.T.); +#262503 = EDGE_CURVE('',#262504,#262504,#262506,.T.); +#262504 = VERTEX_POINT('',#262505); +#262505 = CARTESIAN_POINT('',(136.059042,-81.3231,-5.E-02)); +#262506 = CIRCLE('',#262507,0.487392); +#262507 = AXIS2_PLACEMENT_3D('',#262508,#262509,#262510); +#262508 = CARTESIAN_POINT('',(135.57165,-81.3231,-5.E-02)); +#262509 = DIRECTION('',(0.,0.,1.)); +#262510 = DIRECTION('',(1.,0.,-0.)); +#262511 = FACE_BOUND('',#262512,.T.); +#262512 = EDGE_LOOP('',(#262513)); +#262513 = ORIENTED_EDGE('',*,*,#262514,.T.); +#262514 = EDGE_CURVE('',#262515,#262515,#262517,.T.); +#262515 = VERTEX_POINT('',#262516); +#262516 = CARTESIAN_POINT('',(138.599042,-81.3231,-5.E-02)); +#262517 = CIRCLE('',#262518,0.487392); +#262518 = AXIS2_PLACEMENT_3D('',#262519,#262520,#262521); +#262519 = CARTESIAN_POINT('',(138.11165,-81.3231,-5.E-02)); +#262520 = DIRECTION('',(0.,0.,1.)); +#262521 = DIRECTION('',(1.,0.,-0.)); +#262522 = FACE_BOUND('',#262523,.T.); +#262523 = EDGE_LOOP('',(#262524)); +#262524 = ORIENTED_EDGE('',*,*,#262525,.T.); +#262525 = EDGE_CURVE('',#262526,#262526,#262528,.T.); +#262526 = VERTEX_POINT('',#262527); +#262527 = CARTESIAN_POINT('',(141.139042,-81.3231,-5.E-02)); +#262528 = CIRCLE('',#262529,0.487392); +#262529 = AXIS2_PLACEMENT_3D('',#262530,#262531,#262532); +#262530 = CARTESIAN_POINT('',(140.65165,-81.3231,-5.E-02)); +#262531 = DIRECTION('',(0.,0.,1.)); +#262532 = DIRECTION('',(1.,0.,-0.)); +#262533 = FACE_BOUND('',#262534,.T.); +#262534 = EDGE_LOOP('',(#262535)); +#262535 = ORIENTED_EDGE('',*,*,#262536,.T.); +#262536 = EDGE_CURVE('',#262537,#262537,#262539,.T.); +#262537 = VERTEX_POINT('',#262538); +#262538 = CARTESIAN_POINT('',(143.679042,-81.3231,-5.E-02)); +#262539 = CIRCLE('',#262540,0.487392); +#262540 = AXIS2_PLACEMENT_3D('',#262541,#262542,#262543); +#262541 = CARTESIAN_POINT('',(143.19165,-81.3231,-5.E-02)); +#262542 = DIRECTION('',(0.,0.,1.)); +#262543 = DIRECTION('',(1.,0.,-0.)); +#262544 = FACE_BOUND('',#262545,.T.); +#262545 = EDGE_LOOP('',(#262546)); +#262546 = ORIENTED_EDGE('',*,*,#262547,.T.); +#262547 = EDGE_CURVE('',#262548,#262548,#262550,.T.); +#262548 = VERTEX_POINT('',#262549); +#262549 = CARTESIAN_POINT('',(146.219042,-81.3231,-5.E-02)); +#262550 = CIRCLE('',#262551,0.487392); +#262551 = AXIS2_PLACEMENT_3D('',#262552,#262553,#262554); +#262552 = CARTESIAN_POINT('',(145.73165,-81.3231,-5.E-02)); +#262553 = DIRECTION('',(0.,0.,1.)); +#262554 = DIRECTION('',(1.,0.,-0.)); +#262555 = FACE_BOUND('',#262556,.T.); +#262556 = EDGE_LOOP('',(#262557)); +#262557 = ORIENTED_EDGE('',*,*,#262558,.T.); +#262558 = EDGE_CURVE('',#262559,#262559,#262561,.T.); +#262559 = VERTEX_POINT('',#262560); +#262560 = CARTESIAN_POINT('',(148.759042,-81.3231,-5.E-02)); +#262561 = CIRCLE('',#262562,0.487392); +#262562 = AXIS2_PLACEMENT_3D('',#262563,#262564,#262565); +#262563 = CARTESIAN_POINT('',(148.27165,-81.3231,-5.E-02)); +#262564 = DIRECTION('',(0.,0.,1.)); +#262565 = DIRECTION('',(1.,0.,-0.)); +#262566 = FACE_BOUND('',#262567,.T.); +#262567 = EDGE_LOOP('',(#262568)); +#262568 = ORIENTED_EDGE('',*,*,#262569,.T.); +#262569 = EDGE_CURVE('',#262570,#262570,#262572,.T.); +#262570 = VERTEX_POINT('',#262571); +#262571 = CARTESIAN_POINT('',(151.299042,-81.3231,-5.E-02)); +#262572 = CIRCLE('',#262573,0.487392); +#262573 = AXIS2_PLACEMENT_3D('',#262574,#262575,#262576); +#262574 = CARTESIAN_POINT('',(150.81165,-81.3231,-5.E-02)); +#262575 = DIRECTION('',(0.,0.,1.)); +#262576 = DIRECTION('',(1.,0.,-0.)); +#262577 = FACE_BOUND('',#262578,.T.); +#262578 = EDGE_LOOP('',(#262579)); +#262579 = ORIENTED_EDGE('',*,*,#262580,.T.); +#262580 = EDGE_CURVE('',#262581,#262581,#262583,.T.); +#262581 = VERTEX_POINT('',#262582); +#262582 = CARTESIAN_POINT('',(174.579042,-80.8231,-5.E-02)); +#262583 = CIRCLE('',#262584,0.387392); +#262584 = AXIS2_PLACEMENT_3D('',#262585,#262586,#262587); +#262585 = CARTESIAN_POINT('',(174.19165,-80.8231,-5.E-02)); +#262586 = DIRECTION('',(0.,0.,1.)); +#262587 = DIRECTION('',(1.,0.,-0.)); +#262588 = FACE_BOUND('',#262589,.T.); +#262589 = EDGE_LOOP('',(#262590)); +#262590 = ORIENTED_EDGE('',*,*,#262591,.T.); +#262591 = EDGE_CURVE('',#262592,#262592,#262594,.T.); +#262592 = VERTEX_POINT('',#262593); +#262593 = CARTESIAN_POINT('',(196.929042,-80.8231,-5.E-02)); +#262594 = CIRCLE('',#262595,0.387392); +#262595 = AXIS2_PLACEMENT_3D('',#262596,#262597,#262598); +#262596 = CARTESIAN_POINT('',(196.54165,-80.8231,-5.E-02)); +#262597 = DIRECTION('',(0.,0.,1.)); +#262598 = DIRECTION('',(1.,0.,-0.)); +#262599 = FACE_BOUND('',#262600,.T.); +#262600 = EDGE_LOOP('',(#262601)); +#262601 = ORIENTED_EDGE('',*,*,#262602,.T.); +#262602 = EDGE_CURVE('',#262603,#262603,#262605,.T.); +#262603 = VERTEX_POINT('',#262604); +#262604 = CARTESIAN_POINT('',(210.654042,-80.0731,-5.E-02)); +#262605 = CIRCLE('',#262606,0.487392); +#262606 = AXIS2_PLACEMENT_3D('',#262607,#262608,#262609); +#262607 = CARTESIAN_POINT('',(210.16665,-80.0731,-5.E-02)); +#262608 = DIRECTION('',(0.,0.,1.)); +#262609 = DIRECTION('',(1.,0.,-0.)); +#262610 = FACE_BOUND('',#262611,.T.); +#262611 = EDGE_LOOP('',(#262612)); +#262612 = ORIENTED_EDGE('',*,*,#262613,.T.); +#262613 = EDGE_CURVE('',#262614,#262614,#262616,.T.); +#262614 = VERTEX_POINT('',#262615); +#262615 = CARTESIAN_POINT('',(174.579042,-78.8231,-5.E-02)); +#262616 = CIRCLE('',#262617,0.387392); +#262617 = AXIS2_PLACEMENT_3D('',#262618,#262619,#262620); +#262618 = CARTESIAN_POINT('',(174.19165,-78.8231,-5.E-02)); +#262619 = DIRECTION('',(0.,0.,1.)); +#262620 = DIRECTION('',(1.,0.,-0.)); +#262621 = FACE_BOUND('',#262622,.T.); +#262622 = EDGE_LOOP('',(#262623)); +#262623 = ORIENTED_EDGE('',*,*,#262624,.T.); +#262624 = EDGE_CURVE('',#262625,#262625,#262627,.T.); +#262625 = VERTEX_POINT('',#262626); +#262626 = CARTESIAN_POINT('',(196.929042,-78.8231,-5.E-02)); +#262627 = CIRCLE('',#262628,0.387392); +#262628 = AXIS2_PLACEMENT_3D('',#262629,#262630,#262631); +#262629 = CARTESIAN_POINT('',(196.54165,-78.8231,-5.E-02)); +#262630 = DIRECTION('',(0.,0.,1.)); +#262631 = DIRECTION('',(1.,0.,-0.)); +#262632 = FACE_BOUND('',#262633,.T.); +#262633 = EDGE_LOOP('',(#262634)); +#262634 = ORIENTED_EDGE('',*,*,#262635,.T.); +#262635 = EDGE_CURVE('',#262636,#262636,#262638,.T.); +#262636 = VERTEX_POINT('',#262637); +#262637 = CARTESIAN_POINT('',(210.654042,-77.5731,-5.E-02)); +#262638 = CIRCLE('',#262639,0.487392); +#262639 = AXIS2_PLACEMENT_3D('',#262640,#262641,#262642); +#262640 = CARTESIAN_POINT('',(210.16665,-77.5731,-5.E-02)); +#262641 = DIRECTION('',(0.,0.,1.)); +#262642 = DIRECTION('',(1.,0.,-0.)); +#262643 = FACE_BOUND('',#262644,.T.); +#262644 = EDGE_LOOP('',(#262645)); +#262645 = ORIENTED_EDGE('',*,*,#262646,.T.); +#262646 = EDGE_CURVE('',#262647,#262647,#262649,.T.); +#262647 = VERTEX_POINT('',#262648); +#262648 = CARTESIAN_POINT('',(174.579042,-76.8231,-5.E-02)); +#262649 = CIRCLE('',#262650,0.387392); +#262650 = AXIS2_PLACEMENT_3D('',#262651,#262652,#262653); +#262651 = CARTESIAN_POINT('',(174.19165,-76.8231,-5.E-02)); +#262652 = DIRECTION('',(0.,0.,1.)); +#262653 = DIRECTION('',(1.,0.,-0.)); +#262654 = FACE_BOUND('',#262655,.T.); +#262655 = EDGE_LOOP('',(#262656)); +#262656 = ORIENTED_EDGE('',*,*,#262657,.T.); +#262657 = EDGE_CURVE('',#262658,#262658,#262660,.T.); +#262658 = VERTEX_POINT('',#262659); +#262659 = CARTESIAN_POINT('',(196.929042,-76.8231,-5.E-02)); +#262660 = CIRCLE('',#262661,0.387392); +#262661 = AXIS2_PLACEMENT_3D('',#262662,#262663,#262664); +#262662 = CARTESIAN_POINT('',(196.54165,-76.8231,-5.E-02)); +#262663 = DIRECTION('',(0.,0.,1.)); +#262664 = DIRECTION('',(1.,0.,-0.)); +#262665 = FACE_BOUND('',#262666,.T.); +#262666 = EDGE_LOOP('',(#262667)); +#262667 = ORIENTED_EDGE('',*,*,#262668,.T.); +#262668 = EDGE_CURVE('',#262669,#262669,#262671,.T.); +#262669 = VERTEX_POINT('',#262670); +#262670 = CARTESIAN_POINT('',(174.579042,-74.8231,-5.E-02)); +#262671 = CIRCLE('',#262672,0.387392); +#262672 = AXIS2_PLACEMENT_3D('',#262673,#262674,#262675); +#262673 = CARTESIAN_POINT('',(174.19165,-74.8231,-5.E-02)); +#262674 = DIRECTION('',(0.,0.,1.)); +#262675 = DIRECTION('',(1.,0.,-0.)); +#262676 = FACE_BOUND('',#262677,.T.); +#262677 = EDGE_LOOP('',(#262678)); +#262678 = ORIENTED_EDGE('',*,*,#262679,.T.); +#262679 = EDGE_CURVE('',#262680,#262680,#262682,.T.); +#262680 = VERTEX_POINT('',#262681); +#262681 = CARTESIAN_POINT('',(196.929042,-74.8231,-5.E-02)); +#262682 = CIRCLE('',#262683,0.387392); +#262683 = AXIS2_PLACEMENT_3D('',#262684,#262685,#262686); +#262684 = CARTESIAN_POINT('',(196.54165,-74.8231,-5.E-02)); +#262685 = DIRECTION('',(0.,0.,1.)); +#262686 = DIRECTION('',(1.,0.,-0.)); +#262687 = FACE_BOUND('',#262688,.T.); +#262688 = EDGE_LOOP('',(#262689)); +#262689 = ORIENTED_EDGE('',*,*,#262690,.T.); +#262690 = EDGE_CURVE('',#262691,#262691,#262693,.T.); +#262691 = VERTEX_POINT('',#262692); +#262692 = CARTESIAN_POINT('',(107.679042,-74.1031,-5.E-02)); +#262693 = CIRCLE('',#262694,0.487392); +#262694 = AXIS2_PLACEMENT_3D('',#262695,#262696,#262697); +#262695 = CARTESIAN_POINT('',(107.19165,-74.1031,-5.E-02)); +#262696 = DIRECTION('',(0.,0.,1.)); +#262697 = DIRECTION('',(1.,0.,-0.)); +#262698 = FACE_BOUND('',#262699,.T.); +#262699 = EDGE_LOOP('',(#262700)); +#262700 = ORIENTED_EDGE('',*,*,#262701,.T.); +#262701 = EDGE_CURVE('',#262702,#262702,#262704,.T.); +#262702 = VERTEX_POINT('',#262703); +#262703 = CARTESIAN_POINT('',(110.219042,-74.1031,-5.E-02)); +#262704 = CIRCLE('',#262705,0.487392); +#262705 = AXIS2_PLACEMENT_3D('',#262706,#262707,#262708); +#262706 = CARTESIAN_POINT('',(109.73165,-74.1031,-5.E-02)); +#262707 = DIRECTION('',(0.,0.,1.)); +#262708 = DIRECTION('',(1.,0.,-0.)); +#262709 = FACE_BOUND('',#262710,.T.); +#262710 = EDGE_LOOP('',(#262711)); +#262711 = ORIENTED_EDGE('',*,*,#262712,.T.); +#262712 = EDGE_CURVE('',#262713,#262713,#262715,.T.); +#262713 = VERTEX_POINT('',#262714); +#262714 = CARTESIAN_POINT('',(112.759042,-74.1031,-5.E-02)); +#262715 = CIRCLE('',#262716,0.487392); +#262716 = AXIS2_PLACEMENT_3D('',#262717,#262718,#262719); +#262717 = CARTESIAN_POINT('',(112.27165,-74.1031,-5.E-02)); +#262718 = DIRECTION('',(0.,0.,1.)); +#262719 = DIRECTION('',(1.,0.,-0.)); +#262720 = FACE_BOUND('',#262721,.T.); +#262721 = EDGE_LOOP('',(#262722)); +#262722 = ORIENTED_EDGE('',*,*,#262723,.T.); +#262723 = EDGE_CURVE('',#262724,#262724,#262726,.T.); +#262724 = VERTEX_POINT('',#262725); +#262725 = CARTESIAN_POINT('',(115.299042,-74.1031,-5.E-02)); +#262726 = CIRCLE('',#262727,0.487392); +#262727 = AXIS2_PLACEMENT_3D('',#262728,#262729,#262730); +#262728 = CARTESIAN_POINT('',(114.81165,-74.1031,-5.E-02)); +#262729 = DIRECTION('',(0.,0.,1.)); +#262730 = DIRECTION('',(1.,0.,-0.)); +#262731 = FACE_BOUND('',#262732,.T.); +#262732 = EDGE_LOOP('',(#262733)); +#262733 = ORIENTED_EDGE('',*,*,#262734,.T.); +#262734 = EDGE_CURVE('',#262735,#262735,#262737,.T.); +#262735 = VERTEX_POINT('',#262736); +#262736 = CARTESIAN_POINT('',(117.839042,-74.1031,-5.E-02)); +#262737 = CIRCLE('',#262738,0.487392); +#262738 = AXIS2_PLACEMENT_3D('',#262739,#262740,#262741); +#262739 = CARTESIAN_POINT('',(117.35165,-74.1031,-5.E-02)); +#262740 = DIRECTION('',(0.,0.,1.)); +#262741 = DIRECTION('',(1.,0.,-0.)); +#262742 = FACE_BOUND('',#262743,.T.); +#262743 = EDGE_LOOP('',(#262744)); +#262744 = ORIENTED_EDGE('',*,*,#262745,.T.); +#262745 = EDGE_CURVE('',#262746,#262746,#262748,.T.); +#262746 = VERTEX_POINT('',#262747); +#262747 = CARTESIAN_POINT('',(120.379042,-74.1031,-5.E-02)); +#262748 = CIRCLE('',#262749,0.487392); +#262749 = AXIS2_PLACEMENT_3D('',#262750,#262751,#262752); +#262750 = CARTESIAN_POINT('',(119.89165,-74.1031,-5.E-02)); +#262751 = DIRECTION('',(0.,0.,1.)); +#262752 = DIRECTION('',(1.,0.,-0.)); +#262753 = FACE_BOUND('',#262754,.T.); +#262754 = EDGE_LOOP('',(#262755)); +#262755 = ORIENTED_EDGE('',*,*,#262756,.T.); +#262756 = EDGE_CURVE('',#262757,#262757,#262759,.T.); +#262757 = VERTEX_POINT('',#262758); +#262758 = CARTESIAN_POINT('',(122.919042,-74.1031,-5.E-02)); +#262759 = CIRCLE('',#262760,0.487392); +#262760 = AXIS2_PLACEMENT_3D('',#262761,#262762,#262763); +#262761 = CARTESIAN_POINT('',(122.43165,-74.1031,-5.E-02)); +#262762 = DIRECTION('',(0.,0.,1.)); +#262763 = DIRECTION('',(1.,0.,-0.)); +#262764 = FACE_BOUND('',#262765,.T.); +#262765 = EDGE_LOOP('',(#262766)); +#262766 = ORIENTED_EDGE('',*,*,#262767,.T.); +#262767 = EDGE_CURVE('',#262768,#262768,#262770,.T.); +#262768 = VERTEX_POINT('',#262769); +#262769 = CARTESIAN_POINT('',(125.459042,-74.1031,-5.E-02)); +#262770 = CIRCLE('',#262771,0.487392); +#262771 = AXIS2_PLACEMENT_3D('',#262772,#262773,#262774); +#262772 = CARTESIAN_POINT('',(124.97165,-74.1031,-5.E-02)); +#262773 = DIRECTION('',(0.,0.,1.)); +#262774 = DIRECTION('',(1.,0.,-0.)); +#262775 = FACE_BOUND('',#262776,.T.); +#262776 = EDGE_LOOP('',(#262777)); +#262777 = ORIENTED_EDGE('',*,*,#262778,.T.); +#262778 = EDGE_CURVE('',#262779,#262779,#262781,.T.); +#262779 = VERTEX_POINT('',#262780); +#262780 = CARTESIAN_POINT('',(127.999042,-74.1031,-5.E-02)); +#262781 = CIRCLE('',#262782,0.487392); +#262782 = AXIS2_PLACEMENT_3D('',#262783,#262784,#262785); +#262783 = CARTESIAN_POINT('',(127.51165,-74.1031,-5.E-02)); +#262784 = DIRECTION('',(0.,0.,1.)); +#262785 = DIRECTION('',(1.,0.,-0.)); +#262786 = FACE_BOUND('',#262787,.T.); +#262787 = EDGE_LOOP('',(#262788)); +#262788 = ORIENTED_EDGE('',*,*,#262789,.T.); +#262789 = EDGE_CURVE('',#262790,#262790,#262792,.T.); +#262790 = VERTEX_POINT('',#262791); +#262791 = CARTESIAN_POINT('',(130.539042,-74.1031,-5.E-02)); +#262792 = CIRCLE('',#262793,0.487392); +#262793 = AXIS2_PLACEMENT_3D('',#262794,#262795,#262796); +#262794 = CARTESIAN_POINT('',(130.05165,-74.1031,-5.E-02)); +#262795 = DIRECTION('',(0.,0.,1.)); +#262796 = DIRECTION('',(1.,0.,-0.)); +#262797 = FACE_BOUND('',#262798,.T.); +#262798 = EDGE_LOOP('',(#262799)); +#262799 = ORIENTED_EDGE('',*,*,#262800,.T.); +#262800 = EDGE_CURVE('',#262801,#262801,#262803,.T.); +#262801 = VERTEX_POINT('',#262802); +#262802 = CARTESIAN_POINT('',(133.079042,-74.1031,-5.E-02)); +#262803 = CIRCLE('',#262804,0.487392); +#262804 = AXIS2_PLACEMENT_3D('',#262805,#262806,#262807); +#262805 = CARTESIAN_POINT('',(132.59165,-74.1031,-5.E-02)); +#262806 = DIRECTION('',(0.,0.,1.)); +#262807 = DIRECTION('',(1.,0.,-0.)); +#262808 = FACE_BOUND('',#262809,.T.); +#262809 = EDGE_LOOP('',(#262810)); +#262810 = ORIENTED_EDGE('',*,*,#262811,.T.); +#262811 = EDGE_CURVE('',#262812,#262812,#262814,.T.); +#262812 = VERTEX_POINT('',#262813); +#262813 = CARTESIAN_POINT('',(135.619042,-74.1031,-5.E-02)); +#262814 = CIRCLE('',#262815,0.487392); +#262815 = AXIS2_PLACEMENT_3D('',#262816,#262817,#262818); +#262816 = CARTESIAN_POINT('',(135.13165,-74.1031,-5.E-02)); +#262817 = DIRECTION('',(0.,0.,1.)); +#262818 = DIRECTION('',(1.,0.,-0.)); +#262819 = FACE_BOUND('',#262820,.T.); +#262820 = EDGE_LOOP('',(#262821)); +#262821 = ORIENTED_EDGE('',*,*,#262822,.T.); +#262822 = EDGE_CURVE('',#262823,#262823,#262825,.T.); +#262823 = VERTEX_POINT('',#262824); +#262824 = CARTESIAN_POINT('',(138.159042,-74.1031,-5.E-02)); +#262825 = CIRCLE('',#262826,0.487392); +#262826 = AXIS2_PLACEMENT_3D('',#262827,#262828,#262829); +#262827 = CARTESIAN_POINT('',(137.67165,-74.1031,-5.E-02)); +#262828 = DIRECTION('',(0.,0.,1.)); +#262829 = DIRECTION('',(1.,0.,-0.)); +#262830 = FACE_BOUND('',#262831,.T.); +#262831 = EDGE_LOOP('',(#262832)); +#262832 = ORIENTED_EDGE('',*,*,#262833,.T.); +#262833 = EDGE_CURVE('',#262834,#262834,#262836,.T.); +#262834 = VERTEX_POINT('',#262835); +#262835 = CARTESIAN_POINT('',(140.699042,-74.1031,-5.E-02)); +#262836 = CIRCLE('',#262837,0.487392); +#262837 = AXIS2_PLACEMENT_3D('',#262838,#262839,#262840); +#262838 = CARTESIAN_POINT('',(140.21165,-74.1031,-5.E-02)); +#262839 = DIRECTION('',(0.,0.,1.)); +#262840 = DIRECTION('',(1.,0.,-0.)); +#262841 = FACE_BOUND('',#262842,.T.); +#262842 = EDGE_LOOP('',(#262843)); +#262843 = ORIENTED_EDGE('',*,*,#262844,.T.); +#262844 = EDGE_CURVE('',#262845,#262845,#262847,.T.); +#262845 = VERTEX_POINT('',#262846); +#262846 = CARTESIAN_POINT('',(143.239042,-74.1031,-5.E-02)); +#262847 = CIRCLE('',#262848,0.487392); +#262848 = AXIS2_PLACEMENT_3D('',#262849,#262850,#262851); +#262849 = CARTESIAN_POINT('',(142.75165,-74.1031,-5.E-02)); +#262850 = DIRECTION('',(0.,0.,1.)); +#262851 = DIRECTION('',(1.,0.,-0.)); +#262852 = FACE_BOUND('',#262853,.T.); +#262853 = EDGE_LOOP('',(#262854)); +#262854 = ORIENTED_EDGE('',*,*,#262855,.T.); +#262855 = EDGE_CURVE('',#262856,#262856,#262858,.T.); +#262856 = VERTEX_POINT('',#262857); +#262857 = CARTESIAN_POINT('',(145.779042,-74.1031,-5.E-02)); +#262858 = CIRCLE('',#262859,0.487392); +#262859 = AXIS2_PLACEMENT_3D('',#262860,#262861,#262862); +#262860 = CARTESIAN_POINT('',(145.29165,-74.1031,-5.E-02)); +#262861 = DIRECTION('',(0.,0.,1.)); +#262862 = DIRECTION('',(1.,0.,-0.)); +#262863 = FACE_BOUND('',#262864,.T.); +#262864 = EDGE_LOOP('',(#262865)); +#262865 = ORIENTED_EDGE('',*,*,#262866,.T.); +#262866 = EDGE_CURVE('',#262867,#262867,#262869,.T.); +#262867 = VERTEX_POINT('',#262868); +#262868 = CARTESIAN_POINT('',(148.319042,-74.1031,-5.E-02)); +#262869 = CIRCLE('',#262870,0.487392); +#262870 = AXIS2_PLACEMENT_3D('',#262871,#262872,#262873); +#262871 = CARTESIAN_POINT('',(147.83165,-74.1031,-5.E-02)); +#262872 = DIRECTION('',(0.,0.,1.)); +#262873 = DIRECTION('',(1.,0.,-0.)); +#262874 = FACE_BOUND('',#262875,.T.); +#262875 = EDGE_LOOP('',(#262876)); +#262876 = ORIENTED_EDGE('',*,*,#262877,.T.); +#262877 = EDGE_CURVE('',#262878,#262878,#262880,.T.); +#262878 = VERTEX_POINT('',#262879); +#262879 = CARTESIAN_POINT('',(150.859042,-74.1031,-5.E-02)); +#262880 = CIRCLE('',#262881,0.487392); +#262881 = AXIS2_PLACEMENT_3D('',#262882,#262883,#262884); +#262882 = CARTESIAN_POINT('',(150.37165,-74.1031,-5.E-02)); +#262883 = DIRECTION('',(0.,0.,1.)); +#262884 = DIRECTION('',(1.,0.,-0.)); +#262885 = FACE_BOUND('',#262886,.T.); +#262886 = EDGE_LOOP('',(#262887)); +#262887 = ORIENTED_EDGE('',*,*,#262888,.T.); +#262888 = EDGE_CURVE('',#262889,#262889,#262891,.T.); +#262889 = VERTEX_POINT('',#262890); +#262890 = CARTESIAN_POINT('',(153.399042,-74.1031,-5.E-02)); +#262891 = CIRCLE('',#262892,0.487392); +#262892 = AXIS2_PLACEMENT_3D('',#262893,#262894,#262895); +#262893 = CARTESIAN_POINT('',(152.91165,-74.1031,-5.E-02)); +#262894 = DIRECTION('',(0.,0.,1.)); +#262895 = DIRECTION('',(1.,0.,-0.)); +#262896 = FACE_BOUND('',#262897,.T.); +#262897 = EDGE_LOOP('',(#262898)); +#262898 = ORIENTED_EDGE('',*,*,#262899,.T.); +#262899 = EDGE_CURVE('',#262900,#262900,#262902,.T.); +#262900 = VERTEX_POINT('',#262901); +#262901 = CARTESIAN_POINT('',(155.939042,-74.1031,-5.E-02)); +#262902 = CIRCLE('',#262903,0.487392); +#262903 = AXIS2_PLACEMENT_3D('',#262904,#262905,#262906); +#262904 = CARTESIAN_POINT('',(155.45165,-74.1031,-5.E-02)); +#262905 = DIRECTION('',(0.,0.,1.)); +#262906 = DIRECTION('',(1.,0.,-0.)); +#262907 = FACE_BOUND('',#262908,.T.); +#262908 = EDGE_LOOP('',(#262909)); +#262909 = ORIENTED_EDGE('',*,*,#262910,.T.); +#262910 = EDGE_CURVE('',#262911,#262911,#262913,.T.); +#262911 = VERTEX_POINT('',#262912); +#262912 = CARTESIAN_POINT('',(210.654042,-70.8231,-5.E-02)); +#262913 = CIRCLE('',#262914,0.487392); +#262914 = AXIS2_PLACEMENT_3D('',#262915,#262916,#262917); +#262915 = CARTESIAN_POINT('',(210.16665,-70.8231,-5.E-02)); +#262916 = DIRECTION('',(0.,0.,1.)); +#262917 = DIRECTION('',(1.,0.,-0.)); +#262918 = FACE_BOUND('',#262919,.T.); +#262919 = EDGE_LOOP('',(#262920)); +#262920 = ORIENTED_EDGE('',*,*,#262921,.T.); +#262921 = EDGE_CURVE('',#262922,#262922,#262924,.T.); +#262922 = VERTEX_POINT('',#262923); +#262923 = CARTESIAN_POINT('',(210.654042,-68.3231,-5.E-02)); +#262924 = CIRCLE('',#262925,0.487392); +#262925 = AXIS2_PLACEMENT_3D('',#262926,#262927,#262928); +#262926 = CARTESIAN_POINT('',(210.16665,-68.3231,-5.E-02)); +#262927 = DIRECTION('',(0.,0.,1.)); +#262928 = DIRECTION('',(1.,0.,-0.)); +#262929 = FACE_BOUND('',#262930,.T.); +#262930 = EDGE_LOOP('',(#262931)); +#262931 = ORIENTED_EDGE('',*,*,#262932,.T.); +#262932 = EDGE_CURVE('',#262933,#262933,#262935,.T.); +#262933 = VERTEX_POINT('',#262934); +#262934 = CARTESIAN_POINT('',(189.771542,-66.0256,-5.E-02)); +#262935 = CIRCLE('',#262936,0.487392); +#262936 = AXIS2_PLACEMENT_3D('',#262937,#262938,#262939); +#262937 = CARTESIAN_POINT('',(189.28415,-66.0256,-5.E-02)); +#262938 = DIRECTION('',(0.,0.,1.)); +#262939 = DIRECTION('',(1.,0.,-0.)); +#262940 = FACE_BOUND('',#262941,.T.); +#262941 = EDGE_LOOP('',(#262942)); +#262942 = ORIENTED_EDGE('',*,*,#262943,.T.); +#262943 = EDGE_CURVE('',#262944,#262944,#262946,.T.); +#262944 = VERTEX_POINT('',#262945); +#262945 = CARTESIAN_POINT('',(194.851542,-66.0256,-5.E-02)); +#262946 = CIRCLE('',#262947,0.487392); +#262947 = AXIS2_PLACEMENT_3D('',#262948,#262949,#262950); +#262948 = CARTESIAN_POINT('',(194.36415,-66.0256,-5.E-02)); +#262949 = DIRECTION('',(0.,0.,1.)); +#262950 = DIRECTION('',(1.,0.,-0.)); +#262951 = FACE_BOUND('',#262952,.T.); +#262952 = EDGE_LOOP('',(#262953)); +#262953 = ORIENTED_EDGE('',*,*,#262954,.T.); +#262954 = EDGE_CURVE('',#262955,#262955,#262957,.T.); +#262955 = VERTEX_POINT('',#262956); +#262956 = CARTESIAN_POINT('',(210.654042,-61.8231,-5.E-02)); +#262957 = CIRCLE('',#262958,0.462392); +#262958 = AXIS2_PLACEMENT_3D('',#262959,#262960,#262961); +#262959 = CARTESIAN_POINT('',(210.19165,-61.8231,-5.E-02)); +#262960 = DIRECTION('',(0.,0.,1.)); +#262961 = DIRECTION('',(1.,0.,-0.)); +#262962 = FACE_BOUND('',#262963,.T.); +#262963 = EDGE_LOOP('',(#262964)); +#262964 = ORIENTED_EDGE('',*,*,#262965,.T.); +#262965 = EDGE_CURVE('',#262966,#262966,#262968,.T.); +#262966 = VERTEX_POINT('',#262967); +#262967 = CARTESIAN_POINT('',(210.654042,-59.3231,-5.E-02)); +#262968 = CIRCLE('',#262969,0.462392); +#262969 = AXIS2_PLACEMENT_3D('',#262970,#262971,#262972); +#262970 = CARTESIAN_POINT('',(210.19165,-59.3231,-5.E-02)); +#262971 = DIRECTION('',(0.,0.,1.)); +#262972 = DIRECTION('',(1.,0.,-0.)); +#262973 = FACE_BOUND('',#262974,.T.); +#262974 = EDGE_LOOP('',(#262975)); +#262975 = ORIENTED_EDGE('',*,*,#262976,.T.); +#262976 = EDGE_CURVE('',#262977,#262977,#262979,.T.); +#262977 = VERTEX_POINT('',#262978); +#262978 = CARTESIAN_POINT('',(189.771542,-58.4056,-5.E-02)); +#262979 = CIRCLE('',#262980,0.487392); +#262980 = AXIS2_PLACEMENT_3D('',#262981,#262982,#262983); +#262981 = CARTESIAN_POINT('',(189.28415,-58.4056,-5.E-02)); +#262982 = DIRECTION('',(0.,0.,1.)); +#262983 = DIRECTION('',(1.,0.,-0.)); +#262984 = FACE_BOUND('',#262985,.T.); +#262985 = EDGE_LOOP('',(#262986)); +#262986 = ORIENTED_EDGE('',*,*,#262987,.T.); +#262987 = EDGE_CURVE('',#262988,#262988,#262990,.T.); +#262988 = VERTEX_POINT('',#262989); +#262989 = CARTESIAN_POINT('',(194.851542,-58.4056,-5.E-02)); +#262990 = CIRCLE('',#262991,0.487392); +#262991 = AXIS2_PLACEMENT_3D('',#262992,#262993,#262994); +#262992 = CARTESIAN_POINT('',(194.36415,-58.4056,-5.E-02)); +#262993 = DIRECTION('',(0.,0.,1.)); +#262994 = DIRECTION('',(1.,0.,-0.)); +#262995 = FACE_BOUND('',#262996,.T.); +#262996 = EDGE_LOOP('',(#262997)); +#262997 = ORIENTED_EDGE('',*,*,#262998,.T.); +#262998 = EDGE_CURVE('',#262999,#262999,#263001,.T.); +#262999 = VERTEX_POINT('',#263000); +#263000 = CARTESIAN_POINT('',(210.654042,-56.8231,-5.E-02)); +#263001 = CIRCLE('',#263002,0.462392); +#263002 = AXIS2_PLACEMENT_3D('',#263003,#263004,#263005); +#263003 = CARTESIAN_POINT('',(210.19165,-56.8231,-5.E-02)); +#263004 = DIRECTION('',(0.,0.,1.)); +#263005 = DIRECTION('',(1.,0.,-0.)); +#263006 = FACE_BOUND('',#263007,.T.); +#263007 = EDGE_LOOP('',(#263008)); +#263008 = ORIENTED_EDGE('',*,*,#263009,.T.); +#263009 = EDGE_CURVE('',#263010,#263010,#263012,.T.); +#263010 = VERTEX_POINT('',#263011); +#263011 = CARTESIAN_POINT('',(107.679042,-56.3231,-5.E-02)); +#263012 = CIRCLE('',#263013,0.487392); +#263013 = AXIS2_PLACEMENT_3D('',#263014,#263015,#263016); +#263014 = CARTESIAN_POINT('',(107.19165,-56.3231,-5.E-02)); +#263015 = DIRECTION('',(0.,0.,1.)); +#263016 = DIRECTION('',(1.,0.,-0.)); +#263017 = FACE_BOUND('',#263018,.T.); +#263018 = EDGE_LOOP('',(#263019)); +#263019 = ORIENTED_EDGE('',*,*,#263020,.T.); +#263020 = EDGE_CURVE('',#263021,#263021,#263023,.T.); +#263021 = VERTEX_POINT('',#263022); +#263022 = CARTESIAN_POINT('',(110.219042,-56.3231,-5.E-02)); +#263023 = CIRCLE('',#263024,0.487392); +#263024 = AXIS2_PLACEMENT_3D('',#263025,#263026,#263027); +#263025 = CARTESIAN_POINT('',(109.73165,-56.3231,-5.E-02)); +#263026 = DIRECTION('',(0.,0.,1.)); +#263027 = DIRECTION('',(1.,0.,-0.)); +#263028 = FACE_BOUND('',#263029,.T.); +#263029 = EDGE_LOOP('',(#263030)); +#263030 = ORIENTED_EDGE('',*,*,#263031,.T.); +#263031 = EDGE_CURVE('',#263032,#263032,#263034,.T.); +#263032 = VERTEX_POINT('',#263033); +#263033 = CARTESIAN_POINT('',(112.759042,-56.3231,-5.E-02)); +#263034 = CIRCLE('',#263035,0.487392); +#263035 = AXIS2_PLACEMENT_3D('',#263036,#263037,#263038); +#263036 = CARTESIAN_POINT('',(112.27165,-56.3231,-5.E-02)); +#263037 = DIRECTION('',(0.,0.,1.)); +#263038 = DIRECTION('',(1.,0.,-0.)); +#263039 = FACE_BOUND('',#263040,.T.); +#263040 = EDGE_LOOP('',(#263041)); +#263041 = ORIENTED_EDGE('',*,*,#263042,.T.); +#263042 = EDGE_CURVE('',#263043,#263043,#263045,.T.); +#263043 = VERTEX_POINT('',#263044); +#263044 = CARTESIAN_POINT('',(115.299042,-56.3231,-5.E-02)); +#263045 = CIRCLE('',#263046,0.487392); +#263046 = AXIS2_PLACEMENT_3D('',#263047,#263048,#263049); +#263047 = CARTESIAN_POINT('',(114.81165,-56.3231,-5.E-02)); +#263048 = DIRECTION('',(0.,0.,1.)); +#263049 = DIRECTION('',(1.,0.,-0.)); +#263050 = FACE_BOUND('',#263051,.T.); +#263051 = EDGE_LOOP('',(#263052)); +#263052 = ORIENTED_EDGE('',*,*,#263053,.T.); +#263053 = EDGE_CURVE('',#263054,#263054,#263056,.T.); +#263054 = VERTEX_POINT('',#263055); +#263055 = CARTESIAN_POINT('',(117.839042,-56.3231,-5.E-02)); +#263056 = CIRCLE('',#263057,0.487392); +#263057 = AXIS2_PLACEMENT_3D('',#263058,#263059,#263060); +#263058 = CARTESIAN_POINT('',(117.35165,-56.3231,-5.E-02)); +#263059 = DIRECTION('',(0.,0.,1.)); +#263060 = DIRECTION('',(1.,0.,-0.)); +#263061 = FACE_BOUND('',#263062,.T.); +#263062 = EDGE_LOOP('',(#263063)); +#263063 = ORIENTED_EDGE('',*,*,#263064,.T.); +#263064 = EDGE_CURVE('',#263065,#263065,#263067,.T.); +#263065 = VERTEX_POINT('',#263066); +#263066 = CARTESIAN_POINT('',(120.379042,-56.3231,-5.E-02)); +#263067 = CIRCLE('',#263068,0.487392); +#263068 = AXIS2_PLACEMENT_3D('',#263069,#263070,#263071); +#263069 = CARTESIAN_POINT('',(119.89165,-56.3231,-5.E-02)); +#263070 = DIRECTION('',(0.,0.,1.)); +#263071 = DIRECTION('',(1.,0.,-0.)); +#263072 = FACE_BOUND('',#263073,.T.); +#263073 = EDGE_LOOP('',(#263074)); +#263074 = ORIENTED_EDGE('',*,*,#263075,.T.); +#263075 = EDGE_CURVE('',#263076,#263076,#263078,.T.); +#263076 = VERTEX_POINT('',#263077); +#263077 = CARTESIAN_POINT('',(122.919042,-56.3231,-5.E-02)); +#263078 = CIRCLE('',#263079,0.487392); +#263079 = AXIS2_PLACEMENT_3D('',#263080,#263081,#263082); +#263080 = CARTESIAN_POINT('',(122.43165,-56.3231,-5.E-02)); +#263081 = DIRECTION('',(0.,0.,1.)); +#263082 = DIRECTION('',(1.,0.,-0.)); +#263083 = FACE_BOUND('',#263084,.T.); +#263084 = EDGE_LOOP('',(#263085)); +#263085 = ORIENTED_EDGE('',*,*,#263086,.T.); +#263086 = EDGE_CURVE('',#263087,#263087,#263089,.T.); +#263087 = VERTEX_POINT('',#263088); +#263088 = CARTESIAN_POINT('',(125.459042,-56.3231,-5.E-02)); +#263089 = CIRCLE('',#263090,0.487392); +#263090 = AXIS2_PLACEMENT_3D('',#263091,#263092,#263093); +#263091 = CARTESIAN_POINT('',(124.97165,-56.3231,-5.E-02)); +#263092 = DIRECTION('',(0.,0.,1.)); +#263093 = DIRECTION('',(1.,0.,-0.)); +#263094 = FACE_BOUND('',#263095,.T.); +#263095 = EDGE_LOOP('',(#263096)); +#263096 = ORIENTED_EDGE('',*,*,#263097,.T.); +#263097 = EDGE_CURVE('',#263098,#263098,#263100,.T.); +#263098 = VERTEX_POINT('',#263099); +#263099 = CARTESIAN_POINT('',(127.999042,-56.3231,-5.E-02)); +#263100 = CIRCLE('',#263101,0.487392); +#263101 = AXIS2_PLACEMENT_3D('',#263102,#263103,#263104); +#263102 = CARTESIAN_POINT('',(127.51165,-56.3231,-5.E-02)); +#263103 = DIRECTION('',(0.,0.,1.)); +#263104 = DIRECTION('',(1.,0.,-0.)); +#263105 = FACE_BOUND('',#263106,.T.); +#263106 = EDGE_LOOP('',(#263107)); +#263107 = ORIENTED_EDGE('',*,*,#263108,.T.); +#263108 = EDGE_CURVE('',#263109,#263109,#263111,.T.); +#263109 = VERTEX_POINT('',#263110); +#263110 = CARTESIAN_POINT('',(130.539042,-56.3231,-5.E-02)); +#263111 = CIRCLE('',#263112,0.487392); +#263112 = AXIS2_PLACEMENT_3D('',#263113,#263114,#263115); +#263113 = CARTESIAN_POINT('',(130.05165,-56.3231,-5.E-02)); +#263114 = DIRECTION('',(0.,0.,1.)); +#263115 = DIRECTION('',(1.,0.,-0.)); +#263116 = FACE_BOUND('',#263117,.T.); +#263117 = EDGE_LOOP('',(#263118)); +#263118 = ORIENTED_EDGE('',*,*,#263119,.T.); +#263119 = EDGE_CURVE('',#263120,#263120,#263122,.T.); +#263120 = VERTEX_POINT('',#263121); +#263121 = CARTESIAN_POINT('',(133.079042,-56.3231,-5.E-02)); +#263122 = CIRCLE('',#263123,0.487392); +#263123 = AXIS2_PLACEMENT_3D('',#263124,#263125,#263126); +#263124 = CARTESIAN_POINT('',(132.59165,-56.3231,-5.E-02)); +#263125 = DIRECTION('',(0.,0.,1.)); +#263126 = DIRECTION('',(1.,0.,-0.)); +#263127 = FACE_BOUND('',#263128,.T.); +#263128 = EDGE_LOOP('',(#263129)); +#263129 = ORIENTED_EDGE('',*,*,#263130,.T.); +#263130 = EDGE_CURVE('',#263131,#263131,#263133,.T.); +#263131 = VERTEX_POINT('',#263132); +#263132 = CARTESIAN_POINT('',(135.619042,-56.3231,-5.E-02)); +#263133 = CIRCLE('',#263134,0.487392); +#263134 = AXIS2_PLACEMENT_3D('',#263135,#263136,#263137); +#263135 = CARTESIAN_POINT('',(135.13165,-56.3231,-5.E-02)); +#263136 = DIRECTION('',(0.,0.,1.)); +#263137 = DIRECTION('',(1.,0.,-0.)); +#263138 = FACE_BOUND('',#263139,.T.); +#263139 = EDGE_LOOP('',(#263140)); +#263140 = ORIENTED_EDGE('',*,*,#263141,.T.); +#263141 = EDGE_CURVE('',#263142,#263142,#263144,.T.); +#263142 = VERTEX_POINT('',#263143); +#263143 = CARTESIAN_POINT('',(138.159042,-56.3231,-5.E-02)); +#263144 = CIRCLE('',#263145,0.487392); +#263145 = AXIS2_PLACEMENT_3D('',#263146,#263147,#263148); +#263146 = CARTESIAN_POINT('',(137.67165,-56.3231,-5.E-02)); +#263147 = DIRECTION('',(0.,0.,1.)); +#263148 = DIRECTION('',(1.,0.,-0.)); +#263149 = FACE_BOUND('',#263150,.T.); +#263150 = EDGE_LOOP('',(#263151)); +#263151 = ORIENTED_EDGE('',*,*,#263152,.T.); +#263152 = EDGE_CURVE('',#263153,#263153,#263155,.T.); +#263153 = VERTEX_POINT('',#263154); +#263154 = CARTESIAN_POINT('',(140.699042,-56.3231,-5.E-02)); +#263155 = CIRCLE('',#263156,0.487392); +#263156 = AXIS2_PLACEMENT_3D('',#263157,#263158,#263159); +#263157 = CARTESIAN_POINT('',(140.21165,-56.3231,-5.E-02)); +#263158 = DIRECTION('',(0.,0.,1.)); +#263159 = DIRECTION('',(1.,0.,-0.)); +#263160 = FACE_BOUND('',#263161,.T.); +#263161 = EDGE_LOOP('',(#263162)); +#263162 = ORIENTED_EDGE('',*,*,#263163,.T.); +#263163 = EDGE_CURVE('',#263164,#263164,#263166,.T.); +#263164 = VERTEX_POINT('',#263165); +#263165 = CARTESIAN_POINT('',(143.239042,-56.3231,-5.E-02)); +#263166 = CIRCLE('',#263167,0.487392); +#263167 = AXIS2_PLACEMENT_3D('',#263168,#263169,#263170); +#263168 = CARTESIAN_POINT('',(142.75165,-56.3231,-5.E-02)); +#263169 = DIRECTION('',(0.,0.,1.)); +#263170 = DIRECTION('',(1.,0.,-0.)); +#263171 = FACE_BOUND('',#263172,.T.); +#263172 = EDGE_LOOP('',(#263173)); +#263173 = ORIENTED_EDGE('',*,*,#263174,.T.); +#263174 = EDGE_CURVE('',#263175,#263175,#263177,.T.); +#263175 = VERTEX_POINT('',#263176); +#263176 = CARTESIAN_POINT('',(145.779042,-56.3231,-5.E-02)); +#263177 = CIRCLE('',#263178,0.487392); +#263178 = AXIS2_PLACEMENT_3D('',#263179,#263180,#263181); +#263179 = CARTESIAN_POINT('',(145.29165,-56.3231,-5.E-02)); +#263180 = DIRECTION('',(0.,0.,1.)); +#263181 = DIRECTION('',(1.,0.,-0.)); +#263182 = FACE_BOUND('',#263183,.T.); +#263183 = EDGE_LOOP('',(#263184)); +#263184 = ORIENTED_EDGE('',*,*,#263185,.T.); +#263185 = EDGE_CURVE('',#263186,#263186,#263188,.T.); +#263186 = VERTEX_POINT('',#263187); +#263187 = CARTESIAN_POINT('',(148.319042,-56.3231,-5.E-02)); +#263188 = CIRCLE('',#263189,0.487392); +#263189 = AXIS2_PLACEMENT_3D('',#263190,#263191,#263192); +#263190 = CARTESIAN_POINT('',(147.83165,-56.3231,-5.E-02)); +#263191 = DIRECTION('',(0.,0.,1.)); +#263192 = DIRECTION('',(1.,0.,-0.)); +#263193 = FACE_BOUND('',#263194,.T.); +#263194 = EDGE_LOOP('',(#263195)); +#263195 = ORIENTED_EDGE('',*,*,#263196,.T.); +#263196 = EDGE_CURVE('',#263197,#263197,#263199,.T.); +#263197 = VERTEX_POINT('',#263198); +#263198 = CARTESIAN_POINT('',(150.859042,-56.3231,-5.E-02)); +#263199 = CIRCLE('',#263200,0.487392); +#263200 = AXIS2_PLACEMENT_3D('',#263201,#263202,#263203); +#263201 = CARTESIAN_POINT('',(150.37165,-56.3231,-5.E-02)); +#263202 = DIRECTION('',(0.,0.,1.)); +#263203 = DIRECTION('',(1.,0.,-0.)); +#263204 = FACE_BOUND('',#263205,.T.); +#263205 = EDGE_LOOP('',(#263206)); +#263206 = ORIENTED_EDGE('',*,*,#263207,.T.); +#263207 = EDGE_CURVE('',#263208,#263208,#263210,.T.); +#263208 = VERTEX_POINT('',#263209); +#263209 = CARTESIAN_POINT('',(153.399042,-56.3231,-5.E-02)); +#263210 = CIRCLE('',#263211,0.487392); +#263211 = AXIS2_PLACEMENT_3D('',#263212,#263213,#263214); +#263212 = CARTESIAN_POINT('',(152.91165,-56.3231,-5.E-02)); +#263213 = DIRECTION('',(0.,0.,1.)); +#263214 = DIRECTION('',(1.,0.,-0.)); +#263215 = FACE_BOUND('',#263216,.T.); +#263216 = EDGE_LOOP('',(#263217)); +#263217 = ORIENTED_EDGE('',*,*,#263218,.T.); +#263218 = EDGE_CURVE('',#263219,#263219,#263221,.T.); +#263219 = VERTEX_POINT('',#263220); +#263220 = CARTESIAN_POINT('',(155.939042,-56.3231,-5.E-02)); +#263221 = CIRCLE('',#263222,0.487392); +#263222 = AXIS2_PLACEMENT_3D('',#263223,#263224,#263225); +#263223 = CARTESIAN_POINT('',(155.45165,-56.3231,-5.E-02)); +#263224 = DIRECTION('',(0.,0.,1.)); +#263225 = DIRECTION('',(1.,0.,-0.)); +#263226 = FACE_BOUND('',#263227,.T.); +#263227 = EDGE_LOOP('',(#263228)); +#263228 = ORIENTED_EDGE('',*,*,#263229,.T.); +#263229 = EDGE_CURVE('',#263230,#263230,#263232,.T.); +#263230 = VERTEX_POINT('',#263231); +#263231 = CARTESIAN_POINT('',(189.771542,-55.8656,-5.E-02)); +#263232 = CIRCLE('',#263233,0.487392); +#263233 = AXIS2_PLACEMENT_3D('',#263234,#263235,#263236); +#263234 = CARTESIAN_POINT('',(189.28415,-55.8656,-5.E-02)); +#263235 = DIRECTION('',(0.,0.,1.)); +#263236 = DIRECTION('',(1.,0.,-0.)); +#263237 = FACE_BOUND('',#263238,.T.); +#263238 = EDGE_LOOP('',(#263239)); +#263239 = ORIENTED_EDGE('',*,*,#263240,.T.); +#263240 = EDGE_CURVE('',#263241,#263241,#263243,.T.); +#263241 = VERTEX_POINT('',#263242); +#263242 = CARTESIAN_POINT('',(194.851542,-55.8656,-5.E-02)); +#263243 = CIRCLE('',#263244,0.487392); +#263244 = AXIS2_PLACEMENT_3D('',#263245,#263246,#263247); +#263245 = CARTESIAN_POINT('',(194.36415,-55.8656,-5.E-02)); +#263246 = DIRECTION('',(0.,0.,1.)); +#263247 = DIRECTION('',(1.,0.,-0.)); +#263248 = FACE_BOUND('',#263249,.T.); +#263249 = EDGE_LOOP('',(#263250)); +#263250 = ORIENTED_EDGE('',*,*,#263251,.T.); +#263251 = EDGE_CURVE('',#263252,#263252,#263254,.T.); +#263252 = VERTEX_POINT('',#263253); +#263253 = CARTESIAN_POINT('',(210.654042,-54.3231,-5.E-02)); +#263254 = CIRCLE('',#263255,0.462392); +#263255 = AXIS2_PLACEMENT_3D('',#263256,#263257,#263258); +#263256 = CARTESIAN_POINT('',(210.19165,-54.3231,-5.E-02)); +#263257 = DIRECTION('',(0.,0.,1.)); +#263258 = DIRECTION('',(1.,0.,-0.)); +#263259 = FACE_BOUND('',#263260,.T.); +#263260 = EDGE_LOOP('',(#263261)); +#263261 = ORIENTED_EDGE('',*,*,#263262,.T.); +#263262 = EDGE_CURVE('',#263263,#263263,#263265,.T.); +#263263 = VERTEX_POINT('',#263264); +#263264 = CARTESIAN_POINT('',(111.679042,-51.4031,-5.E-02)); +#263265 = CIRCLE('',#263266,0.487392); +#263266 = AXIS2_PLACEMENT_3D('',#263267,#263268,#263269); +#263267 = CARTESIAN_POINT('',(111.19165,-51.4031,-5.E-02)); +#263268 = DIRECTION('',(0.,0.,1.)); +#263269 = DIRECTION('',(1.,0.,-0.)); +#263270 = FACE_BOUND('',#263271,.T.); +#263271 = EDGE_LOOP('',(#263272)); +#263272 = ORIENTED_EDGE('',*,*,#263273,.T.); +#263273 = EDGE_CURVE('',#263274,#263274,#263276,.T.); +#263274 = VERTEX_POINT('',#263275); +#263275 = CARTESIAN_POINT('',(111.679042,-48.8631,-5.E-02)); +#263276 = CIRCLE('',#263277,0.487392); +#263277 = AXIS2_PLACEMENT_3D('',#263278,#263279,#263280); +#263278 = CARTESIAN_POINT('',(111.19165,-48.8631,-5.E-02)); +#263279 = DIRECTION('',(0.,0.,1.)); +#263280 = DIRECTION('',(1.,0.,-0.)); +#263281 = FACE_BOUND('',#263282,.T.); +#263282 = EDGE_LOOP('',(#263283)); +#263283 = ORIENTED_EDGE('',*,*,#263284,.T.); +#263284 = EDGE_CURVE('',#263285,#263285,#263287,.T.); +#263285 = VERTEX_POINT('',#263286); +#263286 = CARTESIAN_POINT('',(86.779112,-45.3231,-5.E-02)); +#263287 = CIRCLE('',#263288,1.587462); +#263288 = AXIS2_PLACEMENT_3D('',#263289,#263290,#263291); +#263289 = CARTESIAN_POINT('',(85.19165,-45.3231,-5.E-02)); +#263290 = DIRECTION('',(0.,0.,1.)); +#263291 = DIRECTION('',(1.,0.,-0.)); +#263292 = FACE_BOUND('',#263293,.T.); +#263293 = EDGE_LOOP('',(#263294)); +#263294 = ORIENTED_EDGE('',*,*,#263295,.T.); +#263295 = EDGE_CURVE('',#263296,#263296,#263298,.T.); +#263296 = VERTEX_POINT('',#263297); +#263297 = CARTESIAN_POINT('',(212.779112,-45.3231,-5.E-02)); +#263298 = CIRCLE('',#263299,1.587462); +#263299 = AXIS2_PLACEMENT_3D('',#263300,#263301,#263302); +#263300 = CARTESIAN_POINT('',(211.19165,-45.3231,-5.E-02)); +#263301 = DIRECTION('',(0.,0.,1.)); +#263302 = DIRECTION('',(1.,0.,-0.)); +#263303 = FACE_BOUND('',#263304,.T.); +#263304 = EDGE_LOOP('',(#263305)); +#263305 = ORIENTED_EDGE('',*,*,#263306,.T.); +#263306 = EDGE_CURVE('',#263307,#263307,#263309,.T.); +#263307 = VERTEX_POINT('',#263308); +#263308 = CARTESIAN_POINT('',(111.679042,-46.3231,-5.E-02)); +#263309 = CIRCLE('',#263310,0.487392); +#263310 = AXIS2_PLACEMENT_3D('',#263311,#263312,#263313); +#263311 = CARTESIAN_POINT('',(111.19165,-46.3231,-5.E-02)); +#263312 = DIRECTION('',(0.,0.,1.)); +#263313 = DIRECTION('',(1.,0.,-0.)); +#263314 = FACE_BOUND('',#263315,.T.); +#263315 = EDGE_LOOP('',(#263316)); +#263316 = ORIENTED_EDGE('',*,*,#263317,.T.); +#263317 = EDGE_CURVE('',#263318,#263318,#263320,.T.); +#263318 = VERTEX_POINT('',#263319); +#263319 = CARTESIAN_POINT('',(127.679042,-46.3231,-5.E-02)); +#263320 = CIRCLE('',#263321,0.487392); +#263321 = AXIS2_PLACEMENT_3D('',#263322,#263323,#263324); +#263322 = CARTESIAN_POINT('',(127.19165,-46.3231,-5.E-02)); +#263323 = DIRECTION('',(0.,0.,1.)); +#263324 = DIRECTION('',(1.,0.,-0.)); +#263325 = FACE_BOUND('',#263326,.T.); +#263326 = EDGE_LOOP('',(#263327)); +#263327 = ORIENTED_EDGE('',*,*,#263328,.T.); +#263328 = EDGE_CURVE('',#263329,#263329,#263331,.T.); +#263329 = VERTEX_POINT('',#263330); +#263330 = CARTESIAN_POINT('',(130.179042,-46.3231,-5.E-02)); +#263331 = CIRCLE('',#263332,0.487392); +#263332 = AXIS2_PLACEMENT_3D('',#263333,#263334,#263335); +#263333 = CARTESIAN_POINT('',(129.69165,-46.3231,-5.E-02)); +#263334 = DIRECTION('',(0.,0.,1.)); +#263335 = DIRECTION('',(1.,0.,-0.)); +#263336 = FACE_BOUND('',#263337,.T.); +#263337 = EDGE_LOOP('',(#263338)); +#263338 = ORIENTED_EDGE('',*,*,#263339,.T.); +#263339 = EDGE_CURVE('',#263340,#263340,#263342,.T.); +#263340 = VERTEX_POINT('',#263341); +#263341 = CARTESIAN_POINT('',(136.279042,-46.3231,-5.E-02)); +#263342 = CIRCLE('',#263343,0.487392); +#263343 = AXIS2_PLACEMENT_3D('',#263344,#263345,#263346); +#263344 = CARTESIAN_POINT('',(135.79165,-46.3231,-5.E-02)); +#263345 = DIRECTION('',(0.,0.,1.)); +#263346 = DIRECTION('',(1.,0.,-0.)); +#263347 = FACE_BOUND('',#263348,.T.); +#263348 = EDGE_LOOP('',(#263349)); +#263349 = ORIENTED_EDGE('',*,*,#263350,.T.); +#263350 = EDGE_CURVE('',#263351,#263351,#263353,.T.); +#263351 = VERTEX_POINT('',#263352); +#263352 = CARTESIAN_POINT('',(138.779042,-46.3231,-5.E-02)); +#263353 = CIRCLE('',#263354,0.487392); +#263354 = AXIS2_PLACEMENT_3D('',#263355,#263356,#263357); +#263355 = CARTESIAN_POINT('',(138.29165,-46.3231,-5.E-02)); +#263356 = DIRECTION('',(0.,0.,1.)); +#263357 = DIRECTION('',(1.,0.,-0.)); +#263358 = FACE_BOUND('',#263359,.T.); +#263359 = EDGE_LOOP('',(#263360)); +#263360 = ORIENTED_EDGE('',*,*,#263361,.T.); +#263361 = EDGE_CURVE('',#263362,#263362,#263364,.T.); +#263362 = VERTEX_POINT('',#263363); +#263363 = CARTESIAN_POINT('',(98.654042,-46.3231,-5.E-02)); +#263364 = CIRCLE('',#263365,0.462392); +#263365 = AXIS2_PLACEMENT_3D('',#263366,#263367,#263368); +#263366 = CARTESIAN_POINT('',(98.19165,-46.3231,-5.E-02)); +#263367 = DIRECTION('',(0.,0.,1.)); +#263368 = DIRECTION('',(1.,0.,-0.)); +#263369 = FACE_BOUND('',#263370,.T.); +#263370 = EDGE_LOOP('',(#263371)); +#263371 = ORIENTED_EDGE('',*,*,#263372,.T.); +#263372 = EDGE_CURVE('',#263373,#263373,#263375,.T.); +#263373 = VERTEX_POINT('',#263374); +#263374 = CARTESIAN_POINT('',(101.154042,-46.3231,-5.E-02)); +#263375 = CIRCLE('',#263376,0.462392); +#263376 = AXIS2_PLACEMENT_3D('',#263377,#263378,#263379); +#263377 = CARTESIAN_POINT('',(100.69165,-46.3231,-5.E-02)); +#263378 = DIRECTION('',(0.,0.,1.)); +#263379 = DIRECTION('',(1.,0.,-0.)); +#263380 = FACE_BOUND('',#263381,.T.); +#263381 = EDGE_LOOP('',(#263382)); +#263382 = ORIENTED_EDGE('',*,*,#263383,.T.); +#263383 = EDGE_CURVE('',#263384,#263384,#263386,.T.); +#263384 = VERTEX_POINT('',#263385); +#263385 = CARTESIAN_POINT('',(103.654042,-46.3231,-5.E-02)); +#263386 = CIRCLE('',#263387,0.462392); +#263387 = AXIS2_PLACEMENT_3D('',#263388,#263389,#263390); +#263388 = CARTESIAN_POINT('',(103.19165,-46.3231,-5.E-02)); +#263389 = DIRECTION('',(0.,0.,1.)); +#263390 = DIRECTION('',(1.,0.,-0.)); +#263391 = FACE_BOUND('',#263392,.T.); +#263392 = EDGE_LOOP('',(#263393)); +#263393 = ORIENTED_EDGE('',*,*,#263394,.T.); +#263394 = EDGE_CURVE('',#263395,#263395,#263397,.T.); +#263395 = VERTEX_POINT('',#263396); +#263396 = CARTESIAN_POINT('',(106.154042,-46.3231,-5.E-02)); +#263397 = CIRCLE('',#263398,0.462392); +#263398 = AXIS2_PLACEMENT_3D('',#263399,#263400,#263401); +#263399 = CARTESIAN_POINT('',(105.69165,-46.3231,-5.E-02)); +#263400 = DIRECTION('',(0.,0.,1.)); +#263401 = DIRECTION('',(1.,0.,-0.)); +#263402 = FACE_BOUND('',#263403,.T.); +#263403 = EDGE_LOOP('',(#263404)); +#263404 = ORIENTED_EDGE('',*,*,#263405,.T.); +#263405 = EDGE_CURVE('',#263406,#263406,#263408,.T.); +#263406 = VERTEX_POINT('',#263407); +#263407 = CARTESIAN_POINT('',(116.654042,-46.3231,-5.E-02)); +#263408 = CIRCLE('',#263409,0.462392); +#263409 = AXIS2_PLACEMENT_3D('',#263410,#263411,#263412); +#263410 = CARTESIAN_POINT('',(116.19165,-46.3231,-5.E-02)); +#263411 = DIRECTION('',(0.,0.,1.)); +#263412 = DIRECTION('',(1.,0.,-0.)); +#263413 = FACE_BOUND('',#263414,.T.); +#263414 = EDGE_LOOP('',(#263415)); +#263415 = ORIENTED_EDGE('',*,*,#263416,.T.); +#263416 = EDGE_CURVE('',#263417,#263417,#263419,.T.); +#263417 = VERTEX_POINT('',#263418); +#263418 = CARTESIAN_POINT('',(119.154042,-46.3231,-5.E-02)); +#263419 = CIRCLE('',#263420,0.462392); +#263420 = AXIS2_PLACEMENT_3D('',#263421,#263422,#263423); +#263421 = CARTESIAN_POINT('',(118.69165,-46.3231,-5.E-02)); +#263422 = DIRECTION('',(0.,0.,1.)); +#263423 = DIRECTION('',(1.,0.,-0.)); +#263424 = FACE_BOUND('',#263425,.T.); +#263425 = EDGE_LOOP('',(#263426)); +#263426 = ORIENTED_EDGE('',*,*,#263427,.T.); +#263427 = EDGE_CURVE('',#263428,#263428,#263430,.T.); +#263428 = VERTEX_POINT('',#263429); +#263429 = CARTESIAN_POINT('',(121.654042,-46.3231,-5.E-02)); +#263430 = CIRCLE('',#263431,0.462392); +#263431 = AXIS2_PLACEMENT_3D('',#263432,#263433,#263434); +#263432 = CARTESIAN_POINT('',(121.19165,-46.3231,-5.E-02)); +#263433 = DIRECTION('',(0.,0.,1.)); +#263434 = DIRECTION('',(1.,0.,-0.)); +#263435 = PLANE('',#263436); +#263436 = AXIS2_PLACEMENT_3D('',#263437,#263438,#263439); +#263437 = CARTESIAN_POINT('',(0.,0.,-5.E-02)); +#263438 = DIRECTION('',(-0.,-0.,-1.)); +#263439 = DIRECTION('',(-1.,0.,0.)); +#263440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#263444)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#263441,#263442,#263443)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#263441 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#263442 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#263443 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#263444 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#263441, + 'distance_accuracy_value','confusion accuracy'); +#263445 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#263446,#263448); +#263446 = ( REPRESENTATION_RELATIONSHIP('','',#261447,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#263447) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#263447 = ITEM_DEFINED_TRANSFORMATION('','',#11,#507); +#263448 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #263449); +#263449 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('161','=>[0:1:1:72]','',#5, + #261442,$); +#263450 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#261444)); +#263451 = SHAPE_DEFINITION_REPRESENTATION(#263452,#263458); +#263452 = PRODUCT_DEFINITION_SHAPE('','',#263453); +#263453 = PRODUCT_DEFINITION('design','',#263454,#263457); +#263454 = PRODUCT_DEFINITION_FORMATION('','',#263455); +#263455 = PRODUCT('hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_PCB', + 'hbox-watchdog-v3-PROD-unsaved-export-kzCq7d_PCB','',(#263456)); +#263456 = PRODUCT_CONTEXT('',#2,'mechanical'); +#263457 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#263458 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#263459),#270331); +#263459 = MANIFOLD_SOLID_BREP('',#263460); +#263460 = CLOSED_SHELL('',(#263461,#263501,#263532,#263563,#265462, + #267361,#267373,#267390,#267407,#267424,#267441,#267458,#267475, + #267492,#267509,#267526,#267543,#267560,#267577,#267594,#267616, + #267633,#267650,#267662,#267679,#267696,#267718,#267735,#267752, + #267764,#267781,#267798,#267815,#267832,#267849,#267866,#267883, + #267900,#267922,#267939,#267956,#267968,#267985,#268002,#268019, + #268036,#268053,#268070,#268092,#268109,#268126,#268138,#268155, + #268172,#268189,#268206,#268223,#268240,#268257,#268274,#268291, + #268308,#268325,#268342,#268359,#268376,#268393,#268410,#268427, + #268444,#268461,#268478,#268495,#268512,#268529,#268546,#268563, + #268580,#268597,#268614,#268631,#268648,#268665,#268682,#268699, + #268716,#268733,#268750,#268767,#268784,#268801,#268818,#268835, + #268852,#268869,#268886,#268903,#268920,#268937,#268954,#268971, + #268988,#269005,#269022,#269039,#269056,#269073,#269090,#269107, + #269124,#269141,#269158,#269175,#269192,#269209,#269226,#269243, + #269260,#269277,#269294,#269311,#269328,#269345,#269362,#269379, + #269396,#269413,#269430,#269447,#269464,#269481,#269498,#269515, + #269532,#269549,#269566,#269583,#269600,#269617,#269634,#269651, + #269668,#269685,#269702,#269719,#269736,#269753,#269770,#269787, + #269804,#269821,#269838,#269855,#269872,#269889,#269906,#269923, + #269940,#269957,#269974,#269991,#270008,#270025,#270042,#270059, + #270076,#270093,#270110,#270127,#270144,#270161,#270178,#270195, + #270212,#270229,#270246,#270263,#270280,#270297,#270314)); +#263461 = ADVANCED_FACE('',(#263462),#263496,.T.); +#263462 = FACE_BOUND('',#263463,.T.); +#263463 = EDGE_LOOP('',(#263464,#263474,#263482,#263490)); +#263464 = ORIENTED_EDGE('',*,*,#263465,.T.); +#263465 = EDGE_CURVE('',#263466,#263468,#263470,.T.); +#263466 = VERTEX_POINT('',#263467); +#263467 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263468 = VERTEX_POINT('',#263469); +#263469 = CARTESIAN_POINT('',(215.19165,-140.3231,1.51)); +#263470 = LINE('',#263471,#263472); +#263471 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263472 = VECTOR('',#263473,1.); +#263473 = DIRECTION('',(0.,0.,1.)); +#263474 = ORIENTED_EDGE('',*,*,#263475,.T.); +#263475 = EDGE_CURVE('',#263468,#263476,#263478,.T.); +#263476 = VERTEX_POINT('',#263477); +#263477 = CARTESIAN_POINT('',(80.19165,-140.3231,1.51)); +#263478 = LINE('',#263479,#263480); +#263479 = CARTESIAN_POINT('',(215.19165,-140.3231,1.51)); +#263480 = VECTOR('',#263481,1.); +#263481 = DIRECTION('',(-1.,0.,0.)); +#263482 = ORIENTED_EDGE('',*,*,#263483,.F.); +#263483 = EDGE_CURVE('',#263484,#263476,#263486,.T.); +#263484 = VERTEX_POINT('',#263485); +#263485 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263486 = LINE('',#263487,#263488); +#263487 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263488 = VECTOR('',#263489,1.); +#263489 = DIRECTION('',(0.,0.,1.)); +#263490 = ORIENTED_EDGE('',*,*,#263491,.F.); +#263491 = EDGE_CURVE('',#263466,#263484,#263492,.T.); +#263492 = LINE('',#263493,#263494); +#263493 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263494 = VECTOR('',#263495,1.); +#263495 = DIRECTION('',(-1.,0.,0.)); +#263496 = PLANE('',#263497); +#263497 = AXIS2_PLACEMENT_3D('',#263498,#263499,#263500); +#263498 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263499 = DIRECTION('',(0.,-1.,0.)); +#263500 = DIRECTION('',(-1.,0.,0.)); +#263501 = ADVANCED_FACE('',(#263502),#263527,.T.); +#263502 = FACE_BOUND('',#263503,.T.); +#263503 = EDGE_LOOP('',(#263504,#263514,#263520,#263521)); +#263504 = ORIENTED_EDGE('',*,*,#263505,.T.); +#263505 = EDGE_CURVE('',#263506,#263508,#263510,.T.); +#263506 = VERTEX_POINT('',#263507); +#263507 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263508 = VERTEX_POINT('',#263509); +#263509 = CARTESIAN_POINT('',(215.19165,-40.3231,1.51)); +#263510 = LINE('',#263511,#263512); +#263511 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263512 = VECTOR('',#263513,1.); +#263513 = DIRECTION('',(0.,0.,1.)); +#263514 = ORIENTED_EDGE('',*,*,#263515,.T.); +#263515 = EDGE_CURVE('',#263508,#263468,#263516,.T.); +#263516 = LINE('',#263517,#263518); +#263517 = CARTESIAN_POINT('',(215.19165,-40.3231,1.51)); +#263518 = VECTOR('',#263519,1.); +#263519 = DIRECTION('',(0.,-1.,0.)); +#263520 = ORIENTED_EDGE('',*,*,#263465,.F.); +#263521 = ORIENTED_EDGE('',*,*,#263522,.F.); +#263522 = EDGE_CURVE('',#263506,#263466,#263523,.T.); +#263523 = LINE('',#263524,#263525); +#263524 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263525 = VECTOR('',#263526,1.); +#263526 = DIRECTION('',(0.,-1.,0.)); +#263527 = PLANE('',#263528); +#263528 = AXIS2_PLACEMENT_3D('',#263529,#263530,#263531); +#263529 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263530 = DIRECTION('',(1.,0.,-0.)); +#263531 = DIRECTION('',(0.,-1.,0.)); +#263532 = ADVANCED_FACE('',(#263533),#263558,.T.); +#263533 = FACE_BOUND('',#263534,.T.); +#263534 = EDGE_LOOP('',(#263535,#263536,#263544,#263552)); +#263535 = ORIENTED_EDGE('',*,*,#263483,.T.); +#263536 = ORIENTED_EDGE('',*,*,#263537,.T.); +#263537 = EDGE_CURVE('',#263476,#263538,#263540,.T.); +#263538 = VERTEX_POINT('',#263539); +#263539 = CARTESIAN_POINT('',(80.19165,-40.3231,1.51)); +#263540 = LINE('',#263541,#263542); +#263541 = CARTESIAN_POINT('',(80.19165,-140.3231,1.51)); +#263542 = VECTOR('',#263543,1.); +#263543 = DIRECTION('',(0.,1.,0.)); +#263544 = ORIENTED_EDGE('',*,*,#263545,.F.); +#263545 = EDGE_CURVE('',#263546,#263538,#263548,.T.); +#263546 = VERTEX_POINT('',#263547); +#263547 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#263548 = LINE('',#263549,#263550); +#263549 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#263550 = VECTOR('',#263551,1.); +#263551 = DIRECTION('',(0.,0.,1.)); +#263552 = ORIENTED_EDGE('',*,*,#263553,.F.); +#263553 = EDGE_CURVE('',#263484,#263546,#263554,.T.); +#263554 = LINE('',#263555,#263556); +#263555 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263556 = VECTOR('',#263557,1.); +#263557 = DIRECTION('',(0.,1.,0.)); +#263558 = PLANE('',#263559); +#263559 = AXIS2_PLACEMENT_3D('',#263560,#263561,#263562); +#263560 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263561 = DIRECTION('',(-1.,0.,0.)); +#263562 = DIRECTION('',(0.,1.,0.)); +#263563 = ADVANCED_FACE('',(#263564,#263575,#263586,#263597,#263608, + #263619,#263630,#263641,#263652,#263663,#263674,#263685,#263696, + #263707,#263718,#263754,#263765,#263776,#263812,#263823,#263834, + #263845,#263856,#263867,#263878,#263889,#263900,#263936,#263947, + #263958,#263969,#263980,#263991,#264002,#264038,#264049,#264060, + #264071,#264082,#264093,#264104,#264115,#264126,#264137,#264148, + #264159,#264170,#264181,#264192,#264203,#264214,#264225,#264236, + #264247,#264258,#264269,#264280,#264291,#264302,#264313,#264324, + #264335,#264346,#264357,#264368,#264379,#264390,#264401,#264412, + #264423,#264434,#264445,#264456,#264467,#264478,#264489,#264500, + #264511,#264522,#264533,#264544,#264555,#264566,#264577,#264588, + #264599,#264610,#264621,#264632,#264643,#264654,#264665,#264676, + #264687,#264698,#264709,#264720,#264731,#264742,#264753,#264764, + #264775,#264786,#264797,#264808,#264819,#264830,#264841,#264852, + #264863,#264874,#264885,#264896,#264907,#264918,#264929,#264940, + #264951,#264962,#264973,#264984,#264995,#265006,#265017,#265028, + #265039,#265050,#265061,#265072,#265083,#265094,#265105,#265116, + #265127,#265138,#265149,#265160,#265171,#265182,#265193,#265204, + #265215,#265226,#265237,#265248,#265259,#265270,#265281,#265292, + #265303,#265314,#265325,#265336,#265347,#265358,#265369,#265380, + #265391,#265402,#265413,#265424,#265435,#265446),#265457,.F.); +#263564 = FACE_BOUND('',#263565,.F.); +#263565 = EDGE_LOOP('',(#263566,#263567,#263568,#263574)); +#263566 = ORIENTED_EDGE('',*,*,#263491,.F.); +#263567 = ORIENTED_EDGE('',*,*,#263522,.F.); +#263568 = ORIENTED_EDGE('',*,*,#263569,.F.); +#263569 = EDGE_CURVE('',#263546,#263506,#263570,.T.); +#263570 = LINE('',#263571,#263572); +#263571 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#263572 = VECTOR('',#263573,1.); +#263573 = DIRECTION('',(1.,0.,0.)); +#263574 = ORIENTED_EDGE('',*,*,#263553,.F.); +#263575 = FACE_BOUND('',#263576,.F.); +#263576 = EDGE_LOOP('',(#263577)); +#263577 = ORIENTED_EDGE('',*,*,#263578,.T.); +#263578 = EDGE_CURVE('',#263579,#263579,#263581,.T.); +#263579 = VERTEX_POINT('',#263580); +#263580 = CARTESIAN_POINT('',(85.19165,-136.9231,0.)); +#263581 = CIRCLE('',#263582,1.6); +#263582 = AXIS2_PLACEMENT_3D('',#263583,#263584,#263585); +#263583 = CARTESIAN_POINT('',(85.19165,-135.3231,0.)); +#263584 = DIRECTION('',(-0.,0.,-1.)); +#263585 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#263586 = FACE_BOUND('',#263587,.F.); +#263587 = EDGE_LOOP('',(#263588)); +#263588 = ORIENTED_EDGE('',*,*,#263589,.T.); +#263589 = EDGE_CURVE('',#263590,#263590,#263592,.T.); +#263590 = VERTEX_POINT('',#263591); +#263591 = CARTESIAN_POINT('',(115.25165,-130.0831,0.)); +#263592 = CIRCLE('',#263593,0.5); +#263593 = AXIS2_PLACEMENT_3D('',#263594,#263595,#263596); +#263594 = CARTESIAN_POINT('',(115.25165,-129.5831,0.)); +#263595 = DIRECTION('',(-0.,0.,-1.)); +#263596 = DIRECTION('',(-0.,-1.,0.)); +#263597 = FACE_BOUND('',#263598,.F.); +#263598 = EDGE_LOOP('',(#263599)); +#263599 = ORIENTED_EDGE('',*,*,#263600,.T.); +#263600 = EDGE_CURVE('',#263601,#263601,#263603,.T.); +#263601 = VERTEX_POINT('',#263602); +#263602 = CARTESIAN_POINT('',(117.79165,-130.0831,0.)); +#263603 = CIRCLE('',#263604,0.5); +#263604 = AXIS2_PLACEMENT_3D('',#263605,#263606,#263607); +#263605 = CARTESIAN_POINT('',(117.79165,-129.5831,0.)); +#263606 = DIRECTION('',(-0.,0.,-1.)); +#263607 = DIRECTION('',(-0.,-1.,0.)); +#263608 = FACE_BOUND('',#263609,.F.); +#263609 = EDGE_LOOP('',(#263610)); +#263610 = ORIENTED_EDGE('',*,*,#263611,.T.); +#263611 = EDGE_CURVE('',#263612,#263612,#263614,.T.); +#263612 = VERTEX_POINT('',#263613); +#263613 = CARTESIAN_POINT('',(120.33165,-130.0831,0.)); +#263614 = CIRCLE('',#263615,0.5); +#263615 = AXIS2_PLACEMENT_3D('',#263616,#263617,#263618); +#263616 = CARTESIAN_POINT('',(120.33165,-129.5831,0.)); +#263617 = DIRECTION('',(-0.,0.,-1.)); +#263618 = DIRECTION('',(-0.,-1.,0.)); +#263619 = FACE_BOUND('',#263620,.F.); +#263620 = EDGE_LOOP('',(#263621)); +#263621 = ORIENTED_EDGE('',*,*,#263622,.T.); +#263622 = EDGE_CURVE('',#263623,#263623,#263625,.T.); +#263623 = VERTEX_POINT('',#263624); +#263624 = CARTESIAN_POINT('',(122.87165,-130.0831,0.)); +#263625 = CIRCLE('',#263626,0.5); +#263626 = AXIS2_PLACEMENT_3D('',#263627,#263628,#263629); +#263627 = CARTESIAN_POINT('',(122.87165,-129.5831,0.)); +#263628 = DIRECTION('',(-0.,0.,-1.)); +#263629 = DIRECTION('',(-0.,-1.,0.)); +#263630 = FACE_BOUND('',#263631,.F.); +#263631 = EDGE_LOOP('',(#263632)); +#263632 = ORIENTED_EDGE('',*,*,#263633,.T.); +#263633 = EDGE_CURVE('',#263634,#263634,#263636,.T.); +#263634 = VERTEX_POINT('',#263635); +#263635 = CARTESIAN_POINT('',(125.41165,-130.0831,0.)); +#263636 = CIRCLE('',#263637,0.5); +#263637 = AXIS2_PLACEMENT_3D('',#263638,#263639,#263640); +#263638 = CARTESIAN_POINT('',(125.41165,-129.5831,0.)); +#263639 = DIRECTION('',(-0.,0.,-1.)); +#263640 = DIRECTION('',(-0.,-1.,0.)); +#263641 = FACE_BOUND('',#263642,.F.); +#263642 = EDGE_LOOP('',(#263643)); +#263643 = ORIENTED_EDGE('',*,*,#263644,.T.); +#263644 = EDGE_CURVE('',#263645,#263645,#263647,.T.); +#263645 = VERTEX_POINT('',#263646); +#263646 = CARTESIAN_POINT('',(127.95165,-130.0831,0.)); +#263647 = CIRCLE('',#263648,0.5); +#263648 = AXIS2_PLACEMENT_3D('',#263649,#263650,#263651); +#263649 = CARTESIAN_POINT('',(127.95165,-129.5831,0.)); +#263650 = DIRECTION('',(-0.,0.,-1.)); +#263651 = DIRECTION('',(-0.,-1.,0.)); +#263652 = FACE_BOUND('',#263653,.F.); +#263653 = EDGE_LOOP('',(#263654)); +#263654 = ORIENTED_EDGE('',*,*,#263655,.T.); +#263655 = EDGE_CURVE('',#263656,#263656,#263658,.T.); +#263656 = VERTEX_POINT('',#263657); +#263657 = CARTESIAN_POINT('',(130.49165,-130.0831,0.)); +#263658 = CIRCLE('',#263659,0.5); +#263659 = AXIS2_PLACEMENT_3D('',#263660,#263661,#263662); +#263660 = CARTESIAN_POINT('',(130.49165,-129.5831,0.)); +#263661 = DIRECTION('',(-0.,0.,-1.)); +#263662 = DIRECTION('',(-0.,-1.,0.)); +#263663 = FACE_BOUND('',#263664,.F.); +#263664 = EDGE_LOOP('',(#263665)); +#263665 = ORIENTED_EDGE('',*,*,#263666,.T.); +#263666 = EDGE_CURVE('',#263667,#263667,#263669,.T.); +#263667 = VERTEX_POINT('',#263668); +#263668 = CARTESIAN_POINT('',(133.03165,-130.0831,0.)); +#263669 = CIRCLE('',#263670,0.5); +#263670 = AXIS2_PLACEMENT_3D('',#263671,#263672,#263673); +#263671 = CARTESIAN_POINT('',(133.03165,-129.5831,0.)); +#263672 = DIRECTION('',(-0.,0.,-1.)); +#263673 = DIRECTION('',(-0.,-1.,0.)); +#263674 = FACE_BOUND('',#263675,.F.); +#263675 = EDGE_LOOP('',(#263676)); +#263676 = ORIENTED_EDGE('',*,*,#263677,.T.); +#263677 = EDGE_CURVE('',#263678,#263678,#263680,.T.); +#263678 = VERTEX_POINT('',#263679); +#263679 = CARTESIAN_POINT('',(138.11165,-130.0831,0.)); +#263680 = CIRCLE('',#263681,0.5); +#263681 = AXIS2_PLACEMENT_3D('',#263682,#263683,#263684); +#263682 = CARTESIAN_POINT('',(138.11165,-129.5831,0.)); +#263683 = DIRECTION('',(-0.,0.,-1.)); +#263684 = DIRECTION('',(-0.,-1.,0.)); +#263685 = FACE_BOUND('',#263686,.F.); +#263686 = EDGE_LOOP('',(#263687)); +#263687 = ORIENTED_EDGE('',*,*,#263688,.T.); +#263688 = EDGE_CURVE('',#263689,#263689,#263691,.T.); +#263689 = VERTEX_POINT('',#263690); +#263690 = CARTESIAN_POINT('',(140.65165,-130.0831,0.)); +#263691 = CIRCLE('',#263692,0.5); +#263692 = AXIS2_PLACEMENT_3D('',#263693,#263694,#263695); +#263693 = CARTESIAN_POINT('',(140.65165,-129.5831,0.)); +#263694 = DIRECTION('',(-0.,0.,-1.)); +#263695 = DIRECTION('',(-0.,-1.,0.)); +#263696 = FACE_BOUND('',#263697,.F.); +#263697 = EDGE_LOOP('',(#263698)); +#263698 = ORIENTED_EDGE('',*,*,#263699,.T.); +#263699 = EDGE_CURVE('',#263700,#263700,#263702,.T.); +#263700 = VERTEX_POINT('',#263701); +#263701 = CARTESIAN_POINT('',(143.19165,-130.0831,0.)); +#263702 = CIRCLE('',#263703,0.5); +#263703 = AXIS2_PLACEMENT_3D('',#263704,#263705,#263706); +#263704 = CARTESIAN_POINT('',(143.19165,-129.5831,0.)); +#263705 = DIRECTION('',(-0.,0.,-1.)); +#263706 = DIRECTION('',(-0.,-1.,0.)); +#263707 = FACE_BOUND('',#263708,.F.); +#263708 = EDGE_LOOP('',(#263709)); +#263709 = ORIENTED_EDGE('',*,*,#263710,.T.); +#263710 = EDGE_CURVE('',#263711,#263711,#263713,.T.); +#263711 = VERTEX_POINT('',#263712); +#263712 = CARTESIAN_POINT('',(145.73165,-130.0831,0.)); +#263713 = CIRCLE('',#263714,0.5); +#263714 = AXIS2_PLACEMENT_3D('',#263715,#263716,#263717); +#263715 = CARTESIAN_POINT('',(145.73165,-129.5831,0.)); +#263716 = DIRECTION('',(-0.,0.,-1.)); +#263717 = DIRECTION('',(-0.,-1.,0.)); +#263718 = FACE_BOUND('',#263719,.F.); +#263719 = EDGE_LOOP('',(#263720,#263731,#263739,#263748)); +#263720 = ORIENTED_EDGE('',*,*,#263721,.T.); +#263721 = EDGE_CURVE('',#263722,#263724,#263726,.T.); +#263722 = VERTEX_POINT('',#263723); +#263723 = CARTESIAN_POINT('',(160.125,-134.185,0.)); +#263724 = VERTEX_POINT('',#263725); +#263725 = CARTESIAN_POINT('',(159.525,-134.185,0.)); +#263726 = CIRCLE('',#263727,0.3); +#263727 = AXIS2_PLACEMENT_3D('',#263728,#263729,#263730); +#263728 = CARTESIAN_POINT('',(159.825,-134.185,0.)); +#263729 = DIRECTION('',(-0.,0.,-1.)); +#263730 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#263731 = ORIENTED_EDGE('',*,*,#263732,.T.); +#263732 = EDGE_CURVE('',#263724,#263733,#263735,.T.); +#263733 = VERTEX_POINT('',#263734); +#263734 = CARTESIAN_POINT('',(159.525,-133.385,0.)); +#263735 = LINE('',#263736,#263737); +#263736 = CARTESIAN_POINT('',(159.525,-66.6925,0.)); +#263737 = VECTOR('',#263738,1.); +#263738 = DIRECTION('',(-0.,1.,0.)); +#263739 = ORIENTED_EDGE('',*,*,#263740,.T.); +#263740 = EDGE_CURVE('',#263733,#263741,#263743,.T.); +#263741 = VERTEX_POINT('',#263742); +#263742 = CARTESIAN_POINT('',(160.125,-133.385,0.)); +#263743 = CIRCLE('',#263744,0.3); +#263744 = AXIS2_PLACEMENT_3D('',#263745,#263746,#263747); +#263745 = CARTESIAN_POINT('',(159.825,-133.385,0.)); +#263746 = DIRECTION('',(0.,-0.,-1.)); +#263747 = DIRECTION('',(1.,9.473903143469E-14,-0.)); +#263748 = ORIENTED_EDGE('',*,*,#263749,.T.); +#263749 = EDGE_CURVE('',#263741,#263722,#263750,.T.); +#263750 = LINE('',#263751,#263752); +#263751 = CARTESIAN_POINT('',(160.125,-67.0925,0.)); +#263752 = VECTOR('',#263753,1.); +#263753 = DIRECTION('',(0.,-1.,0.)); +#263754 = FACE_BOUND('',#263755,.F.); +#263755 = EDGE_LOOP('',(#263756)); +#263756 = ORIENTED_EDGE('',*,*,#263757,.T.); +#263757 = EDGE_CURVE('',#263758,#263758,#263760,.T.); +#263758 = VERTEX_POINT('',#263759); +#263759 = CARTESIAN_POINT('',(148.27165,-130.0831,0.)); +#263760 = CIRCLE('',#263761,0.5); +#263761 = AXIS2_PLACEMENT_3D('',#263762,#263763,#263764); +#263762 = CARTESIAN_POINT('',(148.27165,-129.5831,0.)); +#263763 = DIRECTION('',(-0.,0.,-1.)); +#263764 = DIRECTION('',(-0.,-1.,0.)); +#263765 = FACE_BOUND('',#263766,.F.); +#263766 = EDGE_LOOP('',(#263767)); +#263767 = ORIENTED_EDGE('',*,*,#263768,.T.); +#263768 = EDGE_CURVE('',#263769,#263769,#263771,.T.); +#263769 = VERTEX_POINT('',#263770); +#263770 = CARTESIAN_POINT('',(150.81165,-130.0831,0.)); +#263771 = CIRCLE('',#263772,0.5); +#263772 = AXIS2_PLACEMENT_3D('',#263773,#263774,#263775); +#263773 = CARTESIAN_POINT('',(150.81165,-129.5831,0.)); +#263774 = DIRECTION('',(-0.,0.,-1.)); +#263775 = DIRECTION('',(-0.,-1.,0.)); +#263776 = FACE_BOUND('',#263777,.F.); +#263777 = EDGE_LOOP('',(#263778,#263789,#263797,#263806)); +#263778 = ORIENTED_EDGE('',*,*,#263779,.T.); +#263779 = EDGE_CURVE('',#263780,#263782,#263784,.T.); +#263780 = VERTEX_POINT('',#263781); +#263781 = CARTESIAN_POINT('',(160.125,-131.155,0.)); +#263782 = VERTEX_POINT('',#263783); +#263783 = CARTESIAN_POINT('',(159.525,-131.155,0.)); +#263784 = CIRCLE('',#263785,0.3); +#263785 = AXIS2_PLACEMENT_3D('',#263786,#263787,#263788); +#263786 = CARTESIAN_POINT('',(159.825,-131.155,0.)); +#263787 = DIRECTION('',(-0.,0.,-1.)); +#263788 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#263789 = ORIENTED_EDGE('',*,*,#263790,.T.); +#263790 = EDGE_CURVE('',#263782,#263791,#263793,.T.); +#263791 = VERTEX_POINT('',#263792); +#263792 = CARTESIAN_POINT('',(159.525,-129.655,0.)); +#263793 = LINE('',#263794,#263795); +#263794 = CARTESIAN_POINT('',(159.525,-64.8275,0.)); +#263795 = VECTOR('',#263796,1.); +#263796 = DIRECTION('',(-0.,1.,0.)); +#263797 = ORIENTED_EDGE('',*,*,#263798,.T.); +#263798 = EDGE_CURVE('',#263791,#263799,#263801,.T.); +#263799 = VERTEX_POINT('',#263800); +#263800 = CARTESIAN_POINT('',(160.125,-129.655,0.)); +#263801 = CIRCLE('',#263802,0.3); +#263802 = AXIS2_PLACEMENT_3D('',#263803,#263804,#263805); +#263803 = CARTESIAN_POINT('',(159.825,-129.655,0.)); +#263804 = DIRECTION('',(0.,-0.,-1.)); +#263805 = DIRECTION('',(1.,-9.473903143469E-14,0.)); +#263806 = ORIENTED_EDGE('',*,*,#263807,.T.); +#263807 = EDGE_CURVE('',#263799,#263780,#263808,.T.); +#263808 = LINE('',#263809,#263810); +#263809 = CARTESIAN_POINT('',(160.125,-65.5775,0.)); +#263810 = VECTOR('',#263811,1.); +#263811 = DIRECTION('',(0.,-1.,0.)); +#263812 = FACE_BOUND('',#263813,.F.); +#263813 = EDGE_LOOP('',(#263814)); +#263814 = ORIENTED_EDGE('',*,*,#263815,.T.); +#263815 = EDGE_CURVE('',#263816,#263816,#263818,.T.); +#263816 = VERTEX_POINT('',#263817); +#263817 = CARTESIAN_POINT('',(161.175,-130.975,0.)); +#263818 = CIRCLE('',#263819,0.2); +#263819 = AXIS2_PLACEMENT_3D('',#263820,#263821,#263822); +#263820 = CARTESIAN_POINT('',(161.175,-130.775,0.)); +#263821 = DIRECTION('',(-0.,0.,-1.)); +#263822 = DIRECTION('',(-0.,-1.,0.)); +#263823 = FACE_BOUND('',#263824,.F.); +#263824 = EDGE_LOOP('',(#263825)); +#263825 = ORIENTED_EDGE('',*,*,#263826,.T.); +#263826 = EDGE_CURVE('',#263827,#263827,#263829,.T.); +#263827 = VERTEX_POINT('',#263828); +#263828 = CARTESIAN_POINT('',(162.025,-130.975,0.)); +#263829 = CIRCLE('',#263830,0.2); +#263830 = AXIS2_PLACEMENT_3D('',#263831,#263832,#263833); +#263831 = CARTESIAN_POINT('',(162.025,-130.775,0.)); +#263832 = DIRECTION('',(-0.,0.,-1.)); +#263833 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#263834 = FACE_BOUND('',#263835,.F.); +#263835 = EDGE_LOOP('',(#263836)); +#263836 = ORIENTED_EDGE('',*,*,#263837,.T.); +#263837 = EDGE_CURVE('',#263838,#263838,#263840,.T.); +#263838 = VERTEX_POINT('',#263839); +#263839 = CARTESIAN_POINT('',(162.875,-130.975,0.)); +#263840 = CIRCLE('',#263841,0.2); +#263841 = AXIS2_PLACEMENT_3D('',#263842,#263843,#263844); +#263842 = CARTESIAN_POINT('',(162.875,-130.775,0.)); +#263843 = DIRECTION('',(-0.,0.,-1.)); +#263844 = DIRECTION('',(-0.,-1.,0.)); +#263845 = FACE_BOUND('',#263846,.F.); +#263846 = EDGE_LOOP('',(#263847)); +#263847 = ORIENTED_EDGE('',*,*,#263848,.T.); +#263848 = EDGE_CURVE('',#263849,#263849,#263851,.T.); +#263849 = VERTEX_POINT('',#263850); +#263850 = CARTESIAN_POINT('',(163.725,-130.975,0.)); +#263851 = CIRCLE('',#263852,0.2); +#263852 = AXIS2_PLACEMENT_3D('',#263853,#263854,#263855); +#263853 = CARTESIAN_POINT('',(163.725,-130.775,0.)); +#263854 = DIRECTION('',(-0.,0.,-1.)); +#263855 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#263856 = FACE_BOUND('',#263857,.F.); +#263857 = EDGE_LOOP('',(#263858)); +#263858 = ORIENTED_EDGE('',*,*,#263859,.T.); +#263859 = EDGE_CURVE('',#263860,#263860,#263862,.T.); +#263860 = VERTEX_POINT('',#263861); +#263861 = CARTESIAN_POINT('',(161.175,-129.625,0.)); +#263862 = CIRCLE('',#263863,0.2); +#263863 = AXIS2_PLACEMENT_3D('',#263864,#263865,#263866); +#263864 = CARTESIAN_POINT('',(161.175,-129.425,0.)); +#263865 = DIRECTION('',(-0.,0.,-1.)); +#263866 = DIRECTION('',(-0.,-1.,0.)); +#263867 = FACE_BOUND('',#263868,.F.); +#263868 = EDGE_LOOP('',(#263869)); +#263869 = ORIENTED_EDGE('',*,*,#263870,.T.); +#263870 = EDGE_CURVE('',#263871,#263871,#263873,.T.); +#263871 = VERTEX_POINT('',#263872); +#263872 = CARTESIAN_POINT('',(162.025,-129.625,0.)); +#263873 = CIRCLE('',#263874,0.2); +#263874 = AXIS2_PLACEMENT_3D('',#263875,#263876,#263877); +#263875 = CARTESIAN_POINT('',(162.025,-129.425,0.)); +#263876 = DIRECTION('',(-0.,0.,-1.)); +#263877 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#263878 = FACE_BOUND('',#263879,.F.); +#263879 = EDGE_LOOP('',(#263880)); +#263880 = ORIENTED_EDGE('',*,*,#263881,.T.); +#263881 = EDGE_CURVE('',#263882,#263882,#263884,.T.); +#263882 = VERTEX_POINT('',#263883); +#263883 = CARTESIAN_POINT('',(162.875,-129.625,0.)); +#263884 = CIRCLE('',#263885,0.2); +#263885 = AXIS2_PLACEMENT_3D('',#263886,#263887,#263888); +#263886 = CARTESIAN_POINT('',(162.875,-129.425,0.)); +#263887 = DIRECTION('',(-0.,0.,-1.)); +#263888 = DIRECTION('',(-0.,-1.,0.)); +#263889 = FACE_BOUND('',#263890,.F.); +#263890 = EDGE_LOOP('',(#263891)); +#263891 = ORIENTED_EDGE('',*,*,#263892,.T.); +#263892 = EDGE_CURVE('',#263893,#263893,#263895,.T.); +#263893 = VERTEX_POINT('',#263894); +#263894 = CARTESIAN_POINT('',(163.725,-129.625,0.)); +#263895 = CIRCLE('',#263896,0.2); +#263896 = AXIS2_PLACEMENT_3D('',#263897,#263898,#263899); +#263897 = CARTESIAN_POINT('',(163.725,-129.425,0.)); +#263898 = DIRECTION('',(-0.,0.,-1.)); +#263899 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#263900 = FACE_BOUND('',#263901,.F.); +#263901 = EDGE_LOOP('',(#263902,#263913,#263921,#263930)); +#263902 = ORIENTED_EDGE('',*,*,#263903,.T.); +#263903 = EDGE_CURVE('',#263904,#263906,#263908,.T.); +#263904 = VERTEX_POINT('',#263905); +#263905 = CARTESIAN_POINT('',(168.775,-134.185,0.)); +#263906 = VERTEX_POINT('',#263907); +#263907 = CARTESIAN_POINT('',(168.175,-134.185,0.)); +#263908 = CIRCLE('',#263909,0.3); +#263909 = AXIS2_PLACEMENT_3D('',#263910,#263911,#263912); +#263910 = CARTESIAN_POINT('',(168.475,-134.185,0.)); +#263911 = DIRECTION('',(-0.,0.,-1.)); +#263912 = DIRECTION('',(-1.,0.,0.)); +#263913 = ORIENTED_EDGE('',*,*,#263914,.T.); +#263914 = EDGE_CURVE('',#263906,#263915,#263917,.T.); +#263915 = VERTEX_POINT('',#263916); +#263916 = CARTESIAN_POINT('',(168.175,-133.385,0.)); +#263917 = LINE('',#263918,#263919); +#263918 = CARTESIAN_POINT('',(168.175,-66.6925,0.)); +#263919 = VECTOR('',#263920,1.); +#263920 = DIRECTION('',(-0.,1.,0.)); +#263921 = ORIENTED_EDGE('',*,*,#263922,.T.); +#263922 = EDGE_CURVE('',#263915,#263923,#263925,.T.); +#263923 = VERTEX_POINT('',#263924); +#263924 = CARTESIAN_POINT('',(168.775,-133.385,0.)); +#263925 = CIRCLE('',#263926,0.3); +#263926 = AXIS2_PLACEMENT_3D('',#263927,#263928,#263929); +#263927 = CARTESIAN_POINT('',(168.475,-133.385,0.)); +#263928 = DIRECTION('',(0.,-0.,-1.)); +#263929 = DIRECTION('',(1.,9.473903143468E-14,-0.)); +#263930 = ORIENTED_EDGE('',*,*,#263931,.T.); +#263931 = EDGE_CURVE('',#263923,#263904,#263932,.T.); +#263932 = LINE('',#263933,#263934); +#263933 = CARTESIAN_POINT('',(168.775,-67.0925,0.)); +#263934 = VECTOR('',#263935,1.); +#263935 = DIRECTION('',(0.,-1.,0.)); +#263936 = FACE_BOUND('',#263937,.F.); +#263937 = EDGE_LOOP('',(#263938)); +#263938 = ORIENTED_EDGE('',*,*,#263939,.T.); +#263939 = EDGE_CURVE('',#263940,#263940,#263942,.T.); +#263940 = VERTEX_POINT('',#263941); +#263941 = CARTESIAN_POINT('',(172.69165,-134.4731,0.)); +#263942 = CIRCLE('',#263943,0.65); +#263943 = AXIS2_PLACEMENT_3D('',#263944,#263945,#263946); +#263944 = CARTESIAN_POINT('',(172.69165,-133.8231,0.)); +#263945 = DIRECTION('',(-0.,0.,-1.)); +#263946 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#263947 = FACE_BOUND('',#263948,.F.); +#263948 = EDGE_LOOP('',(#263949)); +#263949 = ORIENTED_EDGE('',*,*,#263950,.T.); +#263950 = EDGE_CURVE('',#263951,#263951,#263953,.T.); +#263951 = VERTEX_POINT('',#263952); +#263952 = CARTESIAN_POINT('',(177.69165,-134.4731,0.)); +#263953 = CIRCLE('',#263954,0.65); +#263954 = AXIS2_PLACEMENT_3D('',#263955,#263956,#263957); +#263955 = CARTESIAN_POINT('',(177.69165,-133.8231,0.)); +#263956 = DIRECTION('',(-0.,0.,-1.)); +#263957 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#263958 = FACE_BOUND('',#263959,.F.); +#263959 = EDGE_LOOP('',(#263960)); +#263960 = ORIENTED_EDGE('',*,*,#263961,.T.); +#263961 = EDGE_CURVE('',#263962,#263962,#263964,.T.); +#263962 = VERTEX_POINT('',#263963); +#263963 = CARTESIAN_POINT('',(164.575,-130.975,0.)); +#263964 = CIRCLE('',#263965,0.2); +#263965 = AXIS2_PLACEMENT_3D('',#263966,#263967,#263968); +#263966 = CARTESIAN_POINT('',(164.575,-130.775,0.)); +#263967 = DIRECTION('',(-0.,0.,-1.)); +#263968 = DIRECTION('',(-0.,-1.,0.)); +#263969 = FACE_BOUND('',#263970,.F.); +#263970 = EDGE_LOOP('',(#263971)); +#263971 = ORIENTED_EDGE('',*,*,#263972,.T.); +#263972 = EDGE_CURVE('',#263973,#263973,#263975,.T.); +#263973 = VERTEX_POINT('',#263974); +#263974 = CARTESIAN_POINT('',(165.425,-130.975,0.)); +#263975 = CIRCLE('',#263976,0.2); +#263976 = AXIS2_PLACEMENT_3D('',#263977,#263978,#263979); +#263977 = CARTESIAN_POINT('',(165.425,-130.775,0.)); +#263978 = DIRECTION('',(-0.,0.,-1.)); +#263979 = DIRECTION('',(-0.,-1.,0.)); +#263980 = FACE_BOUND('',#263981,.F.); +#263981 = EDGE_LOOP('',(#263982)); +#263982 = ORIENTED_EDGE('',*,*,#263983,.T.); +#263983 = EDGE_CURVE('',#263984,#263984,#263986,.T.); +#263984 = VERTEX_POINT('',#263985); +#263985 = CARTESIAN_POINT('',(166.275,-130.975,0.)); +#263986 = CIRCLE('',#263987,0.2); +#263987 = AXIS2_PLACEMENT_3D('',#263988,#263989,#263990); +#263988 = CARTESIAN_POINT('',(166.275,-130.775,0.)); +#263989 = DIRECTION('',(-0.,0.,-1.)); +#263990 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#263991 = FACE_BOUND('',#263992,.F.); +#263992 = EDGE_LOOP('',(#263993)); +#263993 = ORIENTED_EDGE('',*,*,#263994,.T.); +#263994 = EDGE_CURVE('',#263995,#263995,#263997,.T.); +#263995 = VERTEX_POINT('',#263996); +#263996 = CARTESIAN_POINT('',(167.125,-130.975,0.)); +#263997 = CIRCLE('',#263998,0.2); +#263998 = AXIS2_PLACEMENT_3D('',#263999,#264000,#264001); +#263999 = CARTESIAN_POINT('',(167.125,-130.775,0.)); +#264000 = DIRECTION('',(-0.,0.,-1.)); +#264001 = DIRECTION('',(-0.,-1.,0.)); +#264002 = FACE_BOUND('',#264003,.F.); +#264003 = EDGE_LOOP('',(#264004,#264015,#264023,#264032)); +#264004 = ORIENTED_EDGE('',*,*,#264005,.T.); +#264005 = EDGE_CURVE('',#264006,#264008,#264010,.T.); +#264006 = VERTEX_POINT('',#264007); +#264007 = CARTESIAN_POINT('',(168.775,-131.155,0.)); +#264008 = VERTEX_POINT('',#264009); +#264009 = CARTESIAN_POINT('',(168.175,-131.155,0.)); +#264010 = CIRCLE('',#264011,0.3); +#264011 = AXIS2_PLACEMENT_3D('',#264012,#264013,#264014); +#264012 = CARTESIAN_POINT('',(168.475,-131.155,0.)); +#264013 = DIRECTION('',(-0.,0.,-1.)); +#264014 = DIRECTION('',(-1.,0.,0.)); +#264015 = ORIENTED_EDGE('',*,*,#264016,.T.); +#264016 = EDGE_CURVE('',#264008,#264017,#264019,.T.); +#264017 = VERTEX_POINT('',#264018); +#264018 = CARTESIAN_POINT('',(168.175,-129.655,0.)); +#264019 = LINE('',#264020,#264021); +#264020 = CARTESIAN_POINT('',(168.175,-64.8275,0.)); +#264021 = VECTOR('',#264022,1.); +#264022 = DIRECTION('',(-0.,1.,0.)); +#264023 = ORIENTED_EDGE('',*,*,#264024,.T.); +#264024 = EDGE_CURVE('',#264017,#264025,#264027,.T.); +#264025 = VERTEX_POINT('',#264026); +#264026 = CARTESIAN_POINT('',(168.775,-129.655,0.)); +#264027 = CIRCLE('',#264028,0.3); +#264028 = AXIS2_PLACEMENT_3D('',#264029,#264030,#264031); +#264029 = CARTESIAN_POINT('',(168.475,-129.655,0.)); +#264030 = DIRECTION('',(0.,-0.,-1.)); +#264031 = DIRECTION('',(1.,0.,-0.)); +#264032 = ORIENTED_EDGE('',*,*,#264033,.T.); +#264033 = EDGE_CURVE('',#264025,#264006,#264034,.T.); +#264034 = LINE('',#264035,#264036); +#264035 = CARTESIAN_POINT('',(168.775,-65.5775,0.)); +#264036 = VECTOR('',#264037,1.); +#264037 = DIRECTION('',(0.,-1.,0.)); +#264038 = FACE_BOUND('',#264039,.F.); +#264039 = EDGE_LOOP('',(#264040)); +#264040 = ORIENTED_EDGE('',*,*,#264041,.T.); +#264041 = EDGE_CURVE('',#264042,#264042,#264044,.T.); +#264042 = VERTEX_POINT('',#264043); +#264043 = CARTESIAN_POINT('',(164.575,-129.625,0.)); +#264044 = CIRCLE('',#264045,0.2); +#264045 = AXIS2_PLACEMENT_3D('',#264046,#264047,#264048); +#264046 = CARTESIAN_POINT('',(164.575,-129.425,0.)); +#264047 = DIRECTION('',(-0.,0.,-1.)); +#264048 = DIRECTION('',(-0.,-1.,0.)); +#264049 = FACE_BOUND('',#264050,.F.); +#264050 = EDGE_LOOP('',(#264051)); +#264051 = ORIENTED_EDGE('',*,*,#264052,.T.); +#264052 = EDGE_CURVE('',#264053,#264053,#264055,.T.); +#264053 = VERTEX_POINT('',#264054); +#264054 = CARTESIAN_POINT('',(165.425,-129.625,0.)); +#264055 = CIRCLE('',#264056,0.2); +#264056 = AXIS2_PLACEMENT_3D('',#264057,#264058,#264059); +#264057 = CARTESIAN_POINT('',(165.425,-129.425,0.)); +#264058 = DIRECTION('',(-0.,0.,-1.)); +#264059 = DIRECTION('',(-0.,-1.,0.)); +#264060 = FACE_BOUND('',#264061,.F.); +#264061 = EDGE_LOOP('',(#264062)); +#264062 = ORIENTED_EDGE('',*,*,#264063,.T.); +#264063 = EDGE_CURVE('',#264064,#264064,#264066,.T.); +#264064 = VERTEX_POINT('',#264065); +#264065 = CARTESIAN_POINT('',(166.275,-129.625,0.)); +#264066 = CIRCLE('',#264067,0.2); +#264067 = AXIS2_PLACEMENT_3D('',#264068,#264069,#264070); +#264068 = CARTESIAN_POINT('',(166.275,-129.425,0.)); +#264069 = DIRECTION('',(-0.,0.,-1.)); +#264070 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#264071 = FACE_BOUND('',#264072,.F.); +#264072 = EDGE_LOOP('',(#264073)); +#264073 = ORIENTED_EDGE('',*,*,#264074,.T.); +#264074 = EDGE_CURVE('',#264075,#264075,#264077,.T.); +#264075 = VERTEX_POINT('',#264076); +#264076 = CARTESIAN_POINT('',(167.125,-129.625,0.)); +#264077 = CIRCLE('',#264078,0.2); +#264078 = AXIS2_PLACEMENT_3D('',#264079,#264080,#264081); +#264079 = CARTESIAN_POINT('',(167.125,-129.425,0.)); +#264080 = DIRECTION('',(-0.,0.,-1.)); +#264081 = DIRECTION('',(-0.,-1.,0.)); +#264082 = FACE_BOUND('',#264083,.F.); +#264083 = EDGE_LOOP('',(#264084)); +#264084 = ORIENTED_EDGE('',*,*,#264085,.T.); +#264085 = EDGE_CURVE('',#264086,#264086,#264088,.T.); +#264086 = VERTEX_POINT('',#264087); +#264087 = CARTESIAN_POINT('',(182.69165,-134.4731,0.)); +#264088 = CIRCLE('',#264089,0.65); +#264089 = AXIS2_PLACEMENT_3D('',#264090,#264091,#264092); +#264090 = CARTESIAN_POINT('',(182.69165,-133.8231,0.)); +#264091 = DIRECTION('',(-0.,0.,-1.)); +#264092 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#264093 = FACE_BOUND('',#264094,.F.); +#264094 = EDGE_LOOP('',(#264095)); +#264095 = ORIENTED_EDGE('',*,*,#264096,.T.); +#264096 = EDGE_CURVE('',#264097,#264097,#264099,.T.); +#264097 = VERTEX_POINT('',#264098); +#264098 = CARTESIAN_POINT('',(187.69165,-134.4731,0.)); +#264099 = CIRCLE('',#264100,0.65); +#264100 = AXIS2_PLACEMENT_3D('',#264101,#264102,#264103); +#264101 = CARTESIAN_POINT('',(187.69165,-133.8231,0.)); +#264102 = DIRECTION('',(-0.,0.,-1.)); +#264103 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#264104 = FACE_BOUND('',#264105,.F.); +#264105 = EDGE_LOOP('',(#264106)); +#264106 = ORIENTED_EDGE('',*,*,#264107,.T.); +#264107 = EDGE_CURVE('',#264108,#264108,#264110,.T.); +#264108 = VERTEX_POINT('',#264109); +#264109 = CARTESIAN_POINT('',(192.69165,-134.4731,0.)); +#264110 = CIRCLE('',#264111,0.65); +#264111 = AXIS2_PLACEMENT_3D('',#264112,#264113,#264114); +#264112 = CARTESIAN_POINT('',(192.69165,-133.8231,0.)); +#264113 = DIRECTION('',(-0.,0.,-1.)); +#264114 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#264115 = FACE_BOUND('',#264116,.F.); +#264116 = EDGE_LOOP('',(#264117)); +#264117 = ORIENTED_EDGE('',*,*,#264118,.T.); +#264118 = EDGE_CURVE('',#264119,#264119,#264121,.T.); +#264119 = VERTEX_POINT('',#264120); +#264120 = CARTESIAN_POINT('',(199.19165,-138.3731,0.)); +#264121 = CIRCLE('',#264122,0.55); +#264122 = AXIS2_PLACEMENT_3D('',#264123,#264124,#264125); +#264123 = CARTESIAN_POINT('',(199.19165,-137.8231,0.)); +#264124 = DIRECTION('',(-0.,0.,-1.)); +#264125 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264126 = FACE_BOUND('',#264127,.F.); +#264127 = EDGE_LOOP('',(#264128)); +#264128 = ORIENTED_EDGE('',*,*,#264129,.T.); +#264129 = EDGE_CURVE('',#264130,#264130,#264132,.T.); +#264130 = VERTEX_POINT('',#264131); +#264131 = CARTESIAN_POINT('',(199.19165,-133.8731,0.)); +#264132 = CIRCLE('',#264133,0.55); +#264133 = AXIS2_PLACEMENT_3D('',#264134,#264135,#264136); +#264134 = CARTESIAN_POINT('',(199.19165,-133.3231,0.)); +#264135 = DIRECTION('',(-0.,0.,-1.)); +#264136 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264137 = FACE_BOUND('',#264138,.F.); +#264138 = EDGE_LOOP('',(#264139)); +#264139 = ORIENTED_EDGE('',*,*,#264140,.T.); +#264140 = EDGE_CURVE('',#264141,#264141,#264143,.T.); +#264141 = VERTEX_POINT('',#264142); +#264142 = CARTESIAN_POINT('',(205.69165,-138.3731,0.)); +#264143 = CIRCLE('',#264144,0.55); +#264144 = AXIS2_PLACEMENT_3D('',#264145,#264146,#264147); +#264145 = CARTESIAN_POINT('',(205.69165,-137.8231,0.)); +#264146 = DIRECTION('',(-0.,0.,-1.)); +#264147 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264148 = FACE_BOUND('',#264149,.F.); +#264149 = EDGE_LOOP('',(#264150)); +#264150 = ORIENTED_EDGE('',*,*,#264151,.T.); +#264151 = EDGE_CURVE('',#264152,#264152,#264154,.T.); +#264152 = VERTEX_POINT('',#264153); +#264153 = CARTESIAN_POINT('',(205.69165,-133.8731,0.)); +#264154 = CIRCLE('',#264155,0.55); +#264155 = AXIS2_PLACEMENT_3D('',#264156,#264157,#264158); +#264156 = CARTESIAN_POINT('',(205.69165,-133.3231,0.)); +#264157 = DIRECTION('',(-0.,0.,-1.)); +#264158 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264159 = FACE_BOUND('',#264160,.F.); +#264160 = EDGE_LOOP('',(#264161)); +#264161 = ORIENTED_EDGE('',*,*,#264162,.T.); +#264162 = EDGE_CURVE('',#264163,#264163,#264165,.T.); +#264163 = VERTEX_POINT('',#264164); +#264164 = CARTESIAN_POINT('',(211.19165,-136.9231,0.)); +#264165 = CIRCLE('',#264166,1.6); +#264166 = AXIS2_PLACEMENT_3D('',#264167,#264168,#264169); +#264167 = CARTESIAN_POINT('',(211.19165,-135.3231,0.)); +#264168 = DIRECTION('',(-0.,0.,-1.)); +#264169 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#264170 = FACE_BOUND('',#264171,.F.); +#264171 = EDGE_LOOP('',(#264172)); +#264172 = ORIENTED_EDGE('',*,*,#264173,.T.); +#264173 = EDGE_CURVE('',#264174,#264174,#264176,.T.); +#264174 = VERTEX_POINT('',#264175); +#264175 = CARTESIAN_POINT('',(210.19165,-121.8231,0.)); +#264176 = CIRCLE('',#264177,0.5); +#264177 = AXIS2_PLACEMENT_3D('',#264178,#264179,#264180); +#264178 = CARTESIAN_POINT('',(210.19165,-121.3231,0.)); +#264179 = DIRECTION('',(-0.,0.,-1.)); +#264180 = DIRECTION('',(-0.,-1.,0.)); +#264181 = FACE_BOUND('',#264182,.F.); +#264182 = EDGE_LOOP('',(#264183)); +#264183 = ORIENTED_EDGE('',*,*,#264184,.T.); +#264184 = EDGE_CURVE('',#264185,#264185,#264187,.T.); +#264185 = VERTEX_POINT('',#264186); +#264186 = CARTESIAN_POINT('',(210.19165,-119.3231,0.)); +#264187 = CIRCLE('',#264188,0.5); +#264188 = AXIS2_PLACEMENT_3D('',#264189,#264190,#264191); +#264189 = CARTESIAN_POINT('',(210.19165,-118.8231,0.)); +#264190 = DIRECTION('',(-0.,0.,-1.)); +#264191 = DIRECTION('',(-0.,-1.,0.)); +#264192 = FACE_BOUND('',#264193,.F.); +#264193 = EDGE_LOOP('',(#264194)); +#264194 = ORIENTED_EDGE('',*,*,#264195,.T.); +#264195 = EDGE_CURVE('',#264196,#264196,#264198,.T.); +#264196 = VERTEX_POINT('',#264197); +#264197 = CARTESIAN_POINT('',(174.19165,-93.2231,0.)); +#264198 = CIRCLE('',#264199,0.4); +#264199 = AXIS2_PLACEMENT_3D('',#264200,#264201,#264202); +#264200 = CARTESIAN_POINT('',(174.19165,-92.8231,0.)); +#264201 = DIRECTION('',(-0.,0.,-1.)); +#264202 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#264203 = FACE_BOUND('',#264204,.F.); +#264204 = EDGE_LOOP('',(#264205)); +#264205 = ORIENTED_EDGE('',*,*,#264206,.T.); +#264206 = EDGE_CURVE('',#264207,#264207,#264209,.T.); +#264207 = VERTEX_POINT('',#264208); +#264208 = CARTESIAN_POINT('',(210.19165,-108.7981,0.)); +#264209 = CIRCLE('',#264210,0.475); +#264210 = AXIS2_PLACEMENT_3D('',#264211,#264212,#264213); +#264211 = CARTESIAN_POINT('',(210.19165,-108.3231,0.)); +#264212 = DIRECTION('',(-0.,0.,-1.)); +#264213 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264214 = FACE_BOUND('',#264215,.F.); +#264215 = EDGE_LOOP('',(#264216)); +#264216 = ORIENTED_EDGE('',*,*,#264217,.T.); +#264217 = EDGE_CURVE('',#264218,#264218,#264220,.T.); +#264218 = VERTEX_POINT('',#264219); +#264219 = CARTESIAN_POINT('',(210.19165,-106.2981,0.)); +#264220 = CIRCLE('',#264221,0.475); +#264221 = AXIS2_PLACEMENT_3D('',#264222,#264223,#264224); +#264222 = CARTESIAN_POINT('',(210.19165,-105.8231,0.)); +#264223 = DIRECTION('',(-0.,0.,-1.)); +#264224 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264225 = FACE_BOUND('',#264226,.F.); +#264226 = EDGE_LOOP('',(#264227)); +#264227 = ORIENTED_EDGE('',*,*,#264228,.T.); +#264228 = EDGE_CURVE('',#264229,#264229,#264231,.T.); +#264229 = VERTEX_POINT('',#264230); +#264230 = CARTESIAN_POINT('',(210.19165,-103.7981,0.)); +#264231 = CIRCLE('',#264232,0.475); +#264232 = AXIS2_PLACEMENT_3D('',#264233,#264234,#264235); +#264233 = CARTESIAN_POINT('',(210.19165,-103.3231,0.)); +#264234 = DIRECTION('',(-0.,0.,-1.)); +#264235 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264236 = FACE_BOUND('',#264237,.F.); +#264237 = EDGE_LOOP('',(#264238)); +#264238 = ORIENTED_EDGE('',*,*,#264239,.T.); +#264239 = EDGE_CURVE('',#264240,#264240,#264242,.T.); +#264240 = VERTEX_POINT('',#264241); +#264241 = CARTESIAN_POINT('',(196.54165,-93.2231,0.)); +#264242 = CIRCLE('',#264243,0.4); +#264243 = AXIS2_PLACEMENT_3D('',#264244,#264245,#264246); +#264244 = CARTESIAN_POINT('',(196.54165,-92.8231,0.)); +#264245 = DIRECTION('',(-0.,0.,-1.)); +#264246 = DIRECTION('',(-0.,-1.,0.)); +#264247 = FACE_BOUND('',#264248,.F.); +#264248 = EDGE_LOOP('',(#264249)); +#264249 = ORIENTED_EDGE('',*,*,#264250,.T.); +#264250 = EDGE_CURVE('',#264251,#264251,#264253,.T.); +#264251 = VERTEX_POINT('',#264252); +#264252 = CARTESIAN_POINT('',(210.19165,-95.7981,0.)); +#264253 = CIRCLE('',#264254,0.475); +#264254 = AXIS2_PLACEMENT_3D('',#264255,#264256,#264257); +#264255 = CARTESIAN_POINT('',(210.19165,-95.3231,0.)); +#264256 = DIRECTION('',(-0.,0.,-1.)); +#264257 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264258 = FACE_BOUND('',#264259,.F.); +#264259 = EDGE_LOOP('',(#264260)); +#264260 = ORIENTED_EDGE('',*,*,#264261,.T.); +#264261 = EDGE_CURVE('',#264262,#264262,#264264,.T.); +#264262 = VERTEX_POINT('',#264263); +#264263 = CARTESIAN_POINT('',(210.19165,-93.2981,0.)); +#264264 = CIRCLE('',#264265,0.475); +#264265 = AXIS2_PLACEMENT_3D('',#264266,#264267,#264268); +#264266 = CARTESIAN_POINT('',(210.19165,-92.8231,0.)); +#264267 = DIRECTION('',(-0.,0.,-1.)); +#264268 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264269 = FACE_BOUND('',#264270,.F.); +#264270 = EDGE_LOOP('',(#264271)); +#264271 = ORIENTED_EDGE('',*,*,#264272,.T.); +#264272 = EDGE_CURVE('',#264273,#264273,#264275,.T.); +#264273 = VERTEX_POINT('',#264274); +#264274 = CARTESIAN_POINT('',(106.11165,-81.8231,0.)); +#264275 = CIRCLE('',#264276,0.5); +#264276 = AXIS2_PLACEMENT_3D('',#264277,#264278,#264279); +#264277 = CARTESIAN_POINT('',(106.11165,-81.3231,0.)); +#264278 = DIRECTION('',(-0.,0.,-1.)); +#264279 = DIRECTION('',(-0.,-1.,0.)); +#264280 = FACE_BOUND('',#264281,.F.); +#264281 = EDGE_LOOP('',(#264282)); +#264282 = ORIENTED_EDGE('',*,*,#264283,.T.); +#264283 = EDGE_CURVE('',#264284,#264284,#264286,.T.); +#264284 = VERTEX_POINT('',#264285); +#264285 = CARTESIAN_POINT('',(108.65165,-81.8231,0.)); +#264286 = CIRCLE('',#264287,0.5); +#264287 = AXIS2_PLACEMENT_3D('',#264288,#264289,#264290); +#264288 = CARTESIAN_POINT('',(108.65165,-81.3231,0.)); +#264289 = DIRECTION('',(-0.,0.,-1.)); +#264290 = DIRECTION('',(-0.,-1.,0.)); +#264291 = FACE_BOUND('',#264292,.F.); +#264292 = EDGE_LOOP('',(#264293)); +#264293 = ORIENTED_EDGE('',*,*,#264294,.T.); +#264294 = EDGE_CURVE('',#264295,#264295,#264297,.T.); +#264295 = VERTEX_POINT('',#264296); +#264296 = CARTESIAN_POINT('',(111.19165,-81.8231,0.)); +#264297 = CIRCLE('',#264298,0.5); +#264298 = AXIS2_PLACEMENT_3D('',#264299,#264300,#264301); +#264299 = CARTESIAN_POINT('',(111.19165,-81.3231,0.)); +#264300 = DIRECTION('',(-0.,0.,-1.)); +#264301 = DIRECTION('',(-0.,-1.,0.)); +#264302 = FACE_BOUND('',#264303,.F.); +#264303 = EDGE_LOOP('',(#264304)); +#264304 = ORIENTED_EDGE('',*,*,#264305,.T.); +#264305 = EDGE_CURVE('',#264306,#264306,#264308,.T.); +#264306 = VERTEX_POINT('',#264307); +#264307 = CARTESIAN_POINT('',(113.73165,-81.8231,0.)); +#264308 = CIRCLE('',#264309,0.5); +#264309 = AXIS2_PLACEMENT_3D('',#264310,#264311,#264312); +#264310 = CARTESIAN_POINT('',(113.73165,-81.3231,0.)); +#264311 = DIRECTION('',(-0.,0.,-1.)); +#264312 = DIRECTION('',(-0.,-1.,0.)); +#264313 = FACE_BOUND('',#264314,.F.); +#264314 = EDGE_LOOP('',(#264315)); +#264315 = ORIENTED_EDGE('',*,*,#264316,.T.); +#264316 = EDGE_CURVE('',#264317,#264317,#264319,.T.); +#264317 = VERTEX_POINT('',#264318); +#264318 = CARTESIAN_POINT('',(107.19165,-74.6031,0.)); +#264319 = CIRCLE('',#264320,0.5); +#264320 = AXIS2_PLACEMENT_3D('',#264321,#264322,#264323); +#264321 = CARTESIAN_POINT('',(107.19165,-74.1031,0.)); +#264322 = DIRECTION('',(-0.,0.,-1.)); +#264323 = DIRECTION('',(-0.,-1.,0.)); +#264324 = FACE_BOUND('',#264325,.F.); +#264325 = EDGE_LOOP('',(#264326)); +#264326 = ORIENTED_EDGE('',*,*,#264327,.T.); +#264327 = EDGE_CURVE('',#264328,#264328,#264330,.T.); +#264328 = VERTEX_POINT('',#264329); +#264329 = CARTESIAN_POINT('',(109.73165,-74.6031,0.)); +#264330 = CIRCLE('',#264331,0.5); +#264331 = AXIS2_PLACEMENT_3D('',#264332,#264333,#264334); +#264332 = CARTESIAN_POINT('',(109.73165,-74.1031,0.)); +#264333 = DIRECTION('',(-0.,0.,-1.)); +#264334 = DIRECTION('',(-0.,-1.,0.)); +#264335 = FACE_BOUND('',#264336,.F.); +#264336 = EDGE_LOOP('',(#264337)); +#264337 = ORIENTED_EDGE('',*,*,#264338,.T.); +#264338 = EDGE_CURVE('',#264339,#264339,#264341,.T.); +#264339 = VERTEX_POINT('',#264340); +#264340 = CARTESIAN_POINT('',(112.27165,-74.6031,0.)); +#264341 = CIRCLE('',#264342,0.5); +#264342 = AXIS2_PLACEMENT_3D('',#264343,#264344,#264345); +#264343 = CARTESIAN_POINT('',(112.27165,-74.1031,0.)); +#264344 = DIRECTION('',(-0.,0.,-1.)); +#264345 = DIRECTION('',(-0.,-1.,0.)); +#264346 = FACE_BOUND('',#264347,.F.); +#264347 = EDGE_LOOP('',(#264348)); +#264348 = ORIENTED_EDGE('',*,*,#264349,.T.); +#264349 = EDGE_CURVE('',#264350,#264350,#264352,.T.); +#264350 = VERTEX_POINT('',#264351); +#264351 = CARTESIAN_POINT('',(114.81165,-74.6031,0.)); +#264352 = CIRCLE('',#264353,0.5); +#264353 = AXIS2_PLACEMENT_3D('',#264354,#264355,#264356); +#264354 = CARTESIAN_POINT('',(114.81165,-74.1031,0.)); +#264355 = DIRECTION('',(-0.,0.,-1.)); +#264356 = DIRECTION('',(-0.,-1.,0.)); +#264357 = FACE_BOUND('',#264358,.F.); +#264358 = EDGE_LOOP('',(#264359)); +#264359 = ORIENTED_EDGE('',*,*,#264360,.T.); +#264360 = EDGE_CURVE('',#264361,#264361,#264363,.T.); +#264361 = VERTEX_POINT('',#264362); +#264362 = CARTESIAN_POINT('',(116.27165,-81.8231,0.)); +#264363 = CIRCLE('',#264364,0.5); +#264364 = AXIS2_PLACEMENT_3D('',#264365,#264366,#264367); +#264365 = CARTESIAN_POINT('',(116.27165,-81.3231,0.)); +#264366 = DIRECTION('',(-0.,0.,-1.)); +#264367 = DIRECTION('',(-0.,-1.,0.)); +#264368 = FACE_BOUND('',#264369,.F.); +#264369 = EDGE_LOOP('',(#264370)); +#264370 = ORIENTED_EDGE('',*,*,#264371,.T.); +#264371 = EDGE_CURVE('',#264372,#264372,#264374,.T.); +#264372 = VERTEX_POINT('',#264373); +#264373 = CARTESIAN_POINT('',(118.81165,-81.8231,0.)); +#264374 = CIRCLE('',#264375,0.5); +#264375 = AXIS2_PLACEMENT_3D('',#264376,#264377,#264378); +#264376 = CARTESIAN_POINT('',(118.81165,-81.3231,0.)); +#264377 = DIRECTION('',(-0.,0.,-1.)); +#264378 = DIRECTION('',(-0.,-1.,0.)); +#264379 = FACE_BOUND('',#264380,.F.); +#264380 = EDGE_LOOP('',(#264381)); +#264381 = ORIENTED_EDGE('',*,*,#264382,.T.); +#264382 = EDGE_CURVE('',#264383,#264383,#264385,.T.); +#264383 = VERTEX_POINT('',#264384); +#264384 = CARTESIAN_POINT('',(121.35165,-81.8231,0.)); +#264385 = CIRCLE('',#264386,0.5); +#264386 = AXIS2_PLACEMENT_3D('',#264387,#264388,#264389); +#264387 = CARTESIAN_POINT('',(121.35165,-81.3231,0.)); +#264388 = DIRECTION('',(-0.,0.,-1.)); +#264389 = DIRECTION('',(-0.,-1.,0.)); +#264390 = FACE_BOUND('',#264391,.F.); +#264391 = EDGE_LOOP('',(#264392)); +#264392 = ORIENTED_EDGE('',*,*,#264393,.T.); +#264393 = EDGE_CURVE('',#264394,#264394,#264396,.T.); +#264394 = VERTEX_POINT('',#264395); +#264395 = CARTESIAN_POINT('',(123.89165,-81.8231,0.)); +#264396 = CIRCLE('',#264397,0.5); +#264397 = AXIS2_PLACEMENT_3D('',#264398,#264399,#264400); +#264398 = CARTESIAN_POINT('',(123.89165,-81.3231,0.)); +#264399 = DIRECTION('',(-0.,0.,-1.)); +#264400 = DIRECTION('',(-0.,-1.,0.)); +#264401 = FACE_BOUND('',#264402,.F.); +#264402 = EDGE_LOOP('',(#264403)); +#264403 = ORIENTED_EDGE('',*,*,#264404,.T.); +#264404 = EDGE_CURVE('',#264405,#264405,#264407,.T.); +#264405 = VERTEX_POINT('',#264406); +#264406 = CARTESIAN_POINT('',(126.43165,-81.8231,0.)); +#264407 = CIRCLE('',#264408,0.5); +#264408 = AXIS2_PLACEMENT_3D('',#264409,#264410,#264411); +#264409 = CARTESIAN_POINT('',(126.43165,-81.3231,0.)); +#264410 = DIRECTION('',(-0.,0.,-1.)); +#264411 = DIRECTION('',(-0.,-1.,0.)); +#264412 = FACE_BOUND('',#264413,.F.); +#264413 = EDGE_LOOP('',(#264414)); +#264414 = ORIENTED_EDGE('',*,*,#264415,.T.); +#264415 = EDGE_CURVE('',#264416,#264416,#264418,.T.); +#264416 = VERTEX_POINT('',#264417); +#264417 = CARTESIAN_POINT('',(128.97165,-81.8231,0.)); +#264418 = CIRCLE('',#264419,0.5); +#264419 = AXIS2_PLACEMENT_3D('',#264420,#264421,#264422); +#264420 = CARTESIAN_POINT('',(128.97165,-81.3231,0.)); +#264421 = DIRECTION('',(-0.,0.,-1.)); +#264422 = DIRECTION('',(-0.,-1.,0.)); +#264423 = FACE_BOUND('',#264424,.F.); +#264424 = EDGE_LOOP('',(#264425)); +#264425 = ORIENTED_EDGE('',*,*,#264426,.T.); +#264426 = EDGE_CURVE('',#264427,#264427,#264429,.T.); +#264427 = VERTEX_POINT('',#264428); +#264428 = CARTESIAN_POINT('',(133.03165,-81.8231,0.)); +#264429 = CIRCLE('',#264430,0.5); +#264430 = AXIS2_PLACEMENT_3D('',#264431,#264432,#264433); +#264431 = CARTESIAN_POINT('',(133.03165,-81.3231,0.)); +#264432 = DIRECTION('',(-0.,0.,-1.)); +#264433 = DIRECTION('',(-0.,-1.,0.)); +#264434 = FACE_BOUND('',#264435,.F.); +#264435 = EDGE_LOOP('',(#264436)); +#264436 = ORIENTED_EDGE('',*,*,#264437,.T.); +#264437 = EDGE_CURVE('',#264438,#264438,#264440,.T.); +#264438 = VERTEX_POINT('',#264439); +#264439 = CARTESIAN_POINT('',(135.57165,-81.8231,0.)); +#264440 = CIRCLE('',#264441,0.5); +#264441 = AXIS2_PLACEMENT_3D('',#264442,#264443,#264444); +#264442 = CARTESIAN_POINT('',(135.57165,-81.3231,0.)); +#264443 = DIRECTION('',(-0.,0.,-1.)); +#264444 = DIRECTION('',(-0.,-1.,0.)); +#264445 = FACE_BOUND('',#264446,.F.); +#264446 = EDGE_LOOP('',(#264447)); +#264447 = ORIENTED_EDGE('',*,*,#264448,.T.); +#264448 = EDGE_CURVE('',#264449,#264449,#264451,.T.); +#264449 = VERTEX_POINT('',#264450); +#264450 = CARTESIAN_POINT('',(138.11165,-81.8231,0.)); +#264451 = CIRCLE('',#264452,0.5); +#264452 = AXIS2_PLACEMENT_3D('',#264453,#264454,#264455); +#264453 = CARTESIAN_POINT('',(138.11165,-81.3231,0.)); +#264454 = DIRECTION('',(-0.,0.,-1.)); +#264455 = DIRECTION('',(-0.,-1.,0.)); +#264456 = FACE_BOUND('',#264457,.F.); +#264457 = EDGE_LOOP('',(#264458)); +#264458 = ORIENTED_EDGE('',*,*,#264459,.T.); +#264459 = EDGE_CURVE('',#264460,#264460,#264462,.T.); +#264460 = VERTEX_POINT('',#264461); +#264461 = CARTESIAN_POINT('',(140.65165,-81.8231,0.)); +#264462 = CIRCLE('',#264463,0.5); +#264463 = AXIS2_PLACEMENT_3D('',#264464,#264465,#264466); +#264464 = CARTESIAN_POINT('',(140.65165,-81.3231,0.)); +#264465 = DIRECTION('',(-0.,0.,-1.)); +#264466 = DIRECTION('',(-0.,-1.,0.)); +#264467 = FACE_BOUND('',#264468,.F.); +#264468 = EDGE_LOOP('',(#264469)); +#264469 = ORIENTED_EDGE('',*,*,#264470,.T.); +#264470 = EDGE_CURVE('',#264471,#264471,#264473,.T.); +#264471 = VERTEX_POINT('',#264472); +#264472 = CARTESIAN_POINT('',(143.19165,-81.8231,0.)); +#264473 = CIRCLE('',#264474,0.5); +#264474 = AXIS2_PLACEMENT_3D('',#264475,#264476,#264477); +#264475 = CARTESIAN_POINT('',(143.19165,-81.3231,0.)); +#264476 = DIRECTION('',(-0.,0.,-1.)); +#264477 = DIRECTION('',(-0.,-1.,0.)); +#264478 = FACE_BOUND('',#264479,.F.); +#264479 = EDGE_LOOP('',(#264480)); +#264480 = ORIENTED_EDGE('',*,*,#264481,.T.); +#264481 = EDGE_CURVE('',#264482,#264482,#264484,.T.); +#264482 = VERTEX_POINT('',#264483); +#264483 = CARTESIAN_POINT('',(145.73165,-81.8231,0.)); +#264484 = CIRCLE('',#264485,0.5); +#264485 = AXIS2_PLACEMENT_3D('',#264486,#264487,#264488); +#264486 = CARTESIAN_POINT('',(145.73165,-81.3231,0.)); +#264487 = DIRECTION('',(-0.,0.,-1.)); +#264488 = DIRECTION('',(-0.,-1.,0.)); +#264489 = FACE_BOUND('',#264490,.F.); +#264490 = EDGE_LOOP('',(#264491)); +#264491 = ORIENTED_EDGE('',*,*,#264492,.T.); +#264492 = EDGE_CURVE('',#264493,#264493,#264495,.T.); +#264493 = VERTEX_POINT('',#264494); +#264494 = CARTESIAN_POINT('',(117.35165,-74.6031,0.)); +#264495 = CIRCLE('',#264496,0.5); +#264496 = AXIS2_PLACEMENT_3D('',#264497,#264498,#264499); +#264497 = CARTESIAN_POINT('',(117.35165,-74.1031,0.)); +#264498 = DIRECTION('',(-0.,0.,-1.)); +#264499 = DIRECTION('',(-0.,-1.,0.)); +#264500 = FACE_BOUND('',#264501,.F.); +#264501 = EDGE_LOOP('',(#264502)); +#264502 = ORIENTED_EDGE('',*,*,#264503,.T.); +#264503 = EDGE_CURVE('',#264504,#264504,#264506,.T.); +#264504 = VERTEX_POINT('',#264505); +#264505 = CARTESIAN_POINT('',(119.89165,-74.6031,0.)); +#264506 = CIRCLE('',#264507,0.5); +#264507 = AXIS2_PLACEMENT_3D('',#264508,#264509,#264510); +#264508 = CARTESIAN_POINT('',(119.89165,-74.1031,0.)); +#264509 = DIRECTION('',(-0.,0.,-1.)); +#264510 = DIRECTION('',(-0.,-1.,0.)); +#264511 = FACE_BOUND('',#264512,.F.); +#264512 = EDGE_LOOP('',(#264513)); +#264513 = ORIENTED_EDGE('',*,*,#264514,.T.); +#264514 = EDGE_CURVE('',#264515,#264515,#264517,.T.); +#264515 = VERTEX_POINT('',#264516); +#264516 = CARTESIAN_POINT('',(122.43165,-74.6031,0.)); +#264517 = CIRCLE('',#264518,0.5); +#264518 = AXIS2_PLACEMENT_3D('',#264519,#264520,#264521); +#264519 = CARTESIAN_POINT('',(122.43165,-74.1031,0.)); +#264520 = DIRECTION('',(-0.,0.,-1.)); +#264521 = DIRECTION('',(-0.,-1.,0.)); +#264522 = FACE_BOUND('',#264523,.F.); +#264523 = EDGE_LOOP('',(#264524)); +#264524 = ORIENTED_EDGE('',*,*,#264525,.T.); +#264525 = EDGE_CURVE('',#264526,#264526,#264528,.T.); +#264526 = VERTEX_POINT('',#264527); +#264527 = CARTESIAN_POINT('',(124.97165,-74.6031,0.)); +#264528 = CIRCLE('',#264529,0.5); +#264529 = AXIS2_PLACEMENT_3D('',#264530,#264531,#264532); +#264530 = CARTESIAN_POINT('',(124.97165,-74.1031,0.)); +#264531 = DIRECTION('',(-0.,0.,-1.)); +#264532 = DIRECTION('',(-0.,-1.,0.)); +#264533 = FACE_BOUND('',#264534,.F.); +#264534 = EDGE_LOOP('',(#264535)); +#264535 = ORIENTED_EDGE('',*,*,#264536,.T.); +#264536 = EDGE_CURVE('',#264537,#264537,#264539,.T.); +#264537 = VERTEX_POINT('',#264538); +#264538 = CARTESIAN_POINT('',(127.51165,-74.6031,0.)); +#264539 = CIRCLE('',#264540,0.5); +#264540 = AXIS2_PLACEMENT_3D('',#264541,#264542,#264543); +#264541 = CARTESIAN_POINT('',(127.51165,-74.1031,0.)); +#264542 = DIRECTION('',(-0.,0.,-1.)); +#264543 = DIRECTION('',(-0.,-1.,0.)); +#264544 = FACE_BOUND('',#264545,.F.); +#264545 = EDGE_LOOP('',(#264546)); +#264546 = ORIENTED_EDGE('',*,*,#264547,.T.); +#264547 = EDGE_CURVE('',#264548,#264548,#264550,.T.); +#264548 = VERTEX_POINT('',#264549); +#264549 = CARTESIAN_POINT('',(130.05165,-74.6031,0.)); +#264550 = CIRCLE('',#264551,0.5); +#264551 = AXIS2_PLACEMENT_3D('',#264552,#264553,#264554); +#264552 = CARTESIAN_POINT('',(130.05165,-74.1031,0.)); +#264553 = DIRECTION('',(-0.,0.,-1.)); +#264554 = DIRECTION('',(-0.,-1.,0.)); +#264555 = FACE_BOUND('',#264556,.F.); +#264556 = EDGE_LOOP('',(#264557)); +#264557 = ORIENTED_EDGE('',*,*,#264558,.T.); +#264558 = EDGE_CURVE('',#264559,#264559,#264561,.T.); +#264559 = VERTEX_POINT('',#264560); +#264560 = CARTESIAN_POINT('',(132.59165,-74.6031,0.)); +#264561 = CIRCLE('',#264562,0.5); +#264562 = AXIS2_PLACEMENT_3D('',#264563,#264564,#264565); +#264563 = CARTESIAN_POINT('',(132.59165,-74.1031,0.)); +#264564 = DIRECTION('',(-0.,0.,-1.)); +#264565 = DIRECTION('',(-0.,-1.,0.)); +#264566 = FACE_BOUND('',#264567,.F.); +#264567 = EDGE_LOOP('',(#264568)); +#264568 = ORIENTED_EDGE('',*,*,#264569,.T.); +#264569 = EDGE_CURVE('',#264570,#264570,#264572,.T.); +#264570 = VERTEX_POINT('',#264571); +#264571 = CARTESIAN_POINT('',(135.13165,-74.6031,0.)); +#264572 = CIRCLE('',#264573,0.5); +#264573 = AXIS2_PLACEMENT_3D('',#264574,#264575,#264576); +#264574 = CARTESIAN_POINT('',(135.13165,-74.1031,0.)); +#264575 = DIRECTION('',(-0.,0.,-1.)); +#264576 = DIRECTION('',(-0.,-1.,0.)); +#264577 = FACE_BOUND('',#264578,.F.); +#264578 = EDGE_LOOP('',(#264579)); +#264579 = ORIENTED_EDGE('',*,*,#264580,.T.); +#264580 = EDGE_CURVE('',#264581,#264581,#264583,.T.); +#264581 = VERTEX_POINT('',#264582); +#264582 = CARTESIAN_POINT('',(137.67165,-74.6031,0.)); +#264583 = CIRCLE('',#264584,0.5); +#264584 = AXIS2_PLACEMENT_3D('',#264585,#264586,#264587); +#264585 = CARTESIAN_POINT('',(137.67165,-74.1031,0.)); +#264586 = DIRECTION('',(-0.,0.,-1.)); +#264587 = DIRECTION('',(-0.,-1.,0.)); +#264588 = FACE_BOUND('',#264589,.F.); +#264589 = EDGE_LOOP('',(#264590)); +#264590 = ORIENTED_EDGE('',*,*,#264591,.T.); +#264591 = EDGE_CURVE('',#264592,#264592,#264594,.T.); +#264592 = VERTEX_POINT('',#264593); +#264593 = CARTESIAN_POINT('',(140.21165,-74.6031,0.)); +#264594 = CIRCLE('',#264595,0.5); +#264595 = AXIS2_PLACEMENT_3D('',#264596,#264597,#264598); +#264596 = CARTESIAN_POINT('',(140.21165,-74.1031,0.)); +#264597 = DIRECTION('',(-0.,0.,-1.)); +#264598 = DIRECTION('',(-0.,-1.,0.)); +#264599 = FACE_BOUND('',#264600,.F.); +#264600 = EDGE_LOOP('',(#264601)); +#264601 = ORIENTED_EDGE('',*,*,#264602,.T.); +#264602 = EDGE_CURVE('',#264603,#264603,#264605,.T.); +#264603 = VERTEX_POINT('',#264604); +#264604 = CARTESIAN_POINT('',(142.75165,-74.6031,0.)); +#264605 = CIRCLE('',#264606,0.5); +#264606 = AXIS2_PLACEMENT_3D('',#264607,#264608,#264609); +#264607 = CARTESIAN_POINT('',(142.75165,-74.1031,0.)); +#264608 = DIRECTION('',(-0.,0.,-1.)); +#264609 = DIRECTION('',(-0.,-1.,0.)); +#264610 = FACE_BOUND('',#264611,.F.); +#264611 = EDGE_LOOP('',(#264612)); +#264612 = ORIENTED_EDGE('',*,*,#264613,.T.); +#264613 = EDGE_CURVE('',#264614,#264614,#264616,.T.); +#264614 = VERTEX_POINT('',#264615); +#264615 = CARTESIAN_POINT('',(145.29165,-74.6031,0.)); +#264616 = CIRCLE('',#264617,0.5); +#264617 = AXIS2_PLACEMENT_3D('',#264618,#264619,#264620); +#264618 = CARTESIAN_POINT('',(145.29165,-74.1031,0.)); +#264619 = DIRECTION('',(-0.,0.,-1.)); +#264620 = DIRECTION('',(-0.,-1.,0.)); +#264621 = FACE_BOUND('',#264622,.F.); +#264622 = EDGE_LOOP('',(#264623)); +#264623 = ORIENTED_EDGE('',*,*,#264624,.T.); +#264624 = EDGE_CURVE('',#264625,#264625,#264627,.T.); +#264625 = VERTEX_POINT('',#264626); +#264626 = CARTESIAN_POINT('',(147.83165,-74.6031,0.)); +#264627 = CIRCLE('',#264628,0.5); +#264628 = AXIS2_PLACEMENT_3D('',#264629,#264630,#264631); +#264629 = CARTESIAN_POINT('',(147.83165,-74.1031,0.)); +#264630 = DIRECTION('',(-0.,0.,-1.)); +#264631 = DIRECTION('',(-0.,-1.,0.)); +#264632 = FACE_BOUND('',#264633,.F.); +#264633 = EDGE_LOOP('',(#264634)); +#264634 = ORIENTED_EDGE('',*,*,#264635,.T.); +#264635 = EDGE_CURVE('',#264636,#264636,#264638,.T.); +#264636 = VERTEX_POINT('',#264637); +#264637 = CARTESIAN_POINT('',(107.19165,-56.8231,0.)); +#264638 = CIRCLE('',#264639,0.5); +#264639 = AXIS2_PLACEMENT_3D('',#264640,#264641,#264642); +#264640 = CARTESIAN_POINT('',(107.19165,-56.3231,0.)); +#264641 = DIRECTION('',(-0.,0.,-1.)); +#264642 = DIRECTION('',(-0.,-1.,0.)); +#264643 = FACE_BOUND('',#264644,.F.); +#264644 = EDGE_LOOP('',(#264645)); +#264645 = ORIENTED_EDGE('',*,*,#264646,.T.); +#264646 = EDGE_CURVE('',#264647,#264647,#264649,.T.); +#264647 = VERTEX_POINT('',#264648); +#264648 = CARTESIAN_POINT('',(109.73165,-56.8231,0.)); +#264649 = CIRCLE('',#264650,0.5); +#264650 = AXIS2_PLACEMENT_3D('',#264651,#264652,#264653); +#264651 = CARTESIAN_POINT('',(109.73165,-56.3231,0.)); +#264652 = DIRECTION('',(-0.,0.,-1.)); +#264653 = DIRECTION('',(-0.,-1.,0.)); +#264654 = FACE_BOUND('',#264655,.F.); +#264655 = EDGE_LOOP('',(#264656)); +#264656 = ORIENTED_EDGE('',*,*,#264657,.T.); +#264657 = EDGE_CURVE('',#264658,#264658,#264660,.T.); +#264658 = VERTEX_POINT('',#264659); +#264659 = CARTESIAN_POINT('',(112.27165,-56.8231,0.)); +#264660 = CIRCLE('',#264661,0.5); +#264661 = AXIS2_PLACEMENT_3D('',#264662,#264663,#264664); +#264662 = CARTESIAN_POINT('',(112.27165,-56.3231,0.)); +#264663 = DIRECTION('',(-0.,0.,-1.)); +#264664 = DIRECTION('',(-0.,-1.,0.)); +#264665 = FACE_BOUND('',#264666,.F.); +#264666 = EDGE_LOOP('',(#264667)); +#264667 = ORIENTED_EDGE('',*,*,#264668,.T.); +#264668 = EDGE_CURVE('',#264669,#264669,#264671,.T.); +#264669 = VERTEX_POINT('',#264670); +#264670 = CARTESIAN_POINT('',(114.81165,-56.8231,0.)); +#264671 = CIRCLE('',#264672,0.5); +#264672 = AXIS2_PLACEMENT_3D('',#264673,#264674,#264675); +#264673 = CARTESIAN_POINT('',(114.81165,-56.3231,0.)); +#264674 = DIRECTION('',(-0.,0.,-1.)); +#264675 = DIRECTION('',(-0.,-1.,0.)); +#264676 = FACE_BOUND('',#264677,.F.); +#264677 = EDGE_LOOP('',(#264678)); +#264678 = ORIENTED_EDGE('',*,*,#264679,.T.); +#264679 = EDGE_CURVE('',#264680,#264680,#264682,.T.); +#264680 = VERTEX_POINT('',#264681); +#264681 = CARTESIAN_POINT('',(85.19165,-46.9231,0.)); +#264682 = CIRCLE('',#264683,1.6); +#264683 = AXIS2_PLACEMENT_3D('',#264684,#264685,#264686); +#264684 = CARTESIAN_POINT('',(85.19165,-45.3231,0.)); +#264685 = DIRECTION('',(-0.,0.,-1.)); +#264686 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#264687 = FACE_BOUND('',#264688,.F.); +#264688 = EDGE_LOOP('',(#264689)); +#264689 = ORIENTED_EDGE('',*,*,#264690,.T.); +#264690 = EDGE_CURVE('',#264691,#264691,#264693,.T.); +#264691 = VERTEX_POINT('',#264692); +#264692 = CARTESIAN_POINT('',(98.19165,-46.7981,0.)); +#264693 = CIRCLE('',#264694,0.475); +#264694 = AXIS2_PLACEMENT_3D('',#264695,#264696,#264697); +#264695 = CARTESIAN_POINT('',(98.19165,-46.3231,0.)); +#264696 = DIRECTION('',(-0.,0.,-1.)); +#264697 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264698 = FACE_BOUND('',#264699,.F.); +#264699 = EDGE_LOOP('',(#264700)); +#264700 = ORIENTED_EDGE('',*,*,#264701,.T.); +#264701 = EDGE_CURVE('',#264702,#264702,#264704,.T.); +#264702 = VERTEX_POINT('',#264703); +#264703 = CARTESIAN_POINT('',(111.19165,-51.9031,0.)); +#264704 = CIRCLE('',#264705,0.5); +#264705 = AXIS2_PLACEMENT_3D('',#264706,#264707,#264708); +#264706 = CARTESIAN_POINT('',(111.19165,-51.4031,0.)); +#264707 = DIRECTION('',(-0.,0.,-1.)); +#264708 = DIRECTION('',(-0.,-1.,0.)); +#264709 = FACE_BOUND('',#264710,.F.); +#264710 = EDGE_LOOP('',(#264711)); +#264711 = ORIENTED_EDGE('',*,*,#264712,.T.); +#264712 = EDGE_CURVE('',#264713,#264713,#264715,.T.); +#264713 = VERTEX_POINT('',#264714); +#264714 = CARTESIAN_POINT('',(100.69165,-46.7981,0.)); +#264715 = CIRCLE('',#264716,0.475); +#264716 = AXIS2_PLACEMENT_3D('',#264717,#264718,#264719); +#264717 = CARTESIAN_POINT('',(100.69165,-46.3231,0.)); +#264718 = DIRECTION('',(-0.,0.,-1.)); +#264719 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264720 = FACE_BOUND('',#264721,.F.); +#264721 = EDGE_LOOP('',(#264722)); +#264722 = ORIENTED_EDGE('',*,*,#264723,.T.); +#264723 = EDGE_CURVE('',#264724,#264724,#264726,.T.); +#264724 = VERTEX_POINT('',#264725); +#264725 = CARTESIAN_POINT('',(103.19165,-46.7981,0.)); +#264726 = CIRCLE('',#264727,0.475); +#264727 = AXIS2_PLACEMENT_3D('',#264728,#264729,#264730); +#264728 = CARTESIAN_POINT('',(103.19165,-46.3231,0.)); +#264729 = DIRECTION('',(-0.,0.,-1.)); +#264730 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264731 = FACE_BOUND('',#264732,.F.); +#264732 = EDGE_LOOP('',(#264733)); +#264733 = ORIENTED_EDGE('',*,*,#264734,.T.); +#264734 = EDGE_CURVE('',#264735,#264735,#264737,.T.); +#264735 = VERTEX_POINT('',#264736); +#264736 = CARTESIAN_POINT('',(105.69165,-46.7981,0.)); +#264737 = CIRCLE('',#264738,0.475); +#264738 = AXIS2_PLACEMENT_3D('',#264739,#264740,#264741); +#264739 = CARTESIAN_POINT('',(105.69165,-46.3231,0.)); +#264740 = DIRECTION('',(-0.,0.,-1.)); +#264741 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264742 = FACE_BOUND('',#264743,.F.); +#264743 = EDGE_LOOP('',(#264744)); +#264744 = ORIENTED_EDGE('',*,*,#264745,.T.); +#264745 = EDGE_CURVE('',#264746,#264746,#264748,.T.); +#264746 = VERTEX_POINT('',#264747); +#264747 = CARTESIAN_POINT('',(111.19165,-49.3631,0.)); +#264748 = CIRCLE('',#264749,0.5); +#264749 = AXIS2_PLACEMENT_3D('',#264750,#264751,#264752); +#264750 = CARTESIAN_POINT('',(111.19165,-48.8631,0.)); +#264751 = DIRECTION('',(-0.,0.,-1.)); +#264752 = DIRECTION('',(-0.,-1.,0.)); +#264753 = FACE_BOUND('',#264754,.F.); +#264754 = EDGE_LOOP('',(#264755)); +#264755 = ORIENTED_EDGE('',*,*,#264756,.T.); +#264756 = EDGE_CURVE('',#264757,#264757,#264759,.T.); +#264757 = VERTEX_POINT('',#264758); +#264758 = CARTESIAN_POINT('',(111.19165,-46.8231,0.)); +#264759 = CIRCLE('',#264760,0.5); +#264760 = AXIS2_PLACEMENT_3D('',#264761,#264762,#264763); +#264761 = CARTESIAN_POINT('',(111.19165,-46.3231,0.)); +#264762 = DIRECTION('',(-0.,0.,-1.)); +#264763 = DIRECTION('',(-0.,-1.,0.)); +#264764 = FACE_BOUND('',#264765,.F.); +#264765 = EDGE_LOOP('',(#264766)); +#264766 = ORIENTED_EDGE('',*,*,#264767,.T.); +#264767 = EDGE_CURVE('',#264768,#264768,#264770,.T.); +#264768 = VERTEX_POINT('',#264769); +#264769 = CARTESIAN_POINT('',(117.35165,-56.8231,0.)); +#264770 = CIRCLE('',#264771,0.5); +#264771 = AXIS2_PLACEMENT_3D('',#264772,#264773,#264774); +#264772 = CARTESIAN_POINT('',(117.35165,-56.3231,0.)); +#264773 = DIRECTION('',(-0.,0.,-1.)); +#264774 = DIRECTION('',(-0.,-1.,0.)); +#264775 = FACE_BOUND('',#264776,.F.); +#264776 = EDGE_LOOP('',(#264777)); +#264777 = ORIENTED_EDGE('',*,*,#264778,.T.); +#264778 = EDGE_CURVE('',#264779,#264779,#264781,.T.); +#264779 = VERTEX_POINT('',#264780); +#264780 = CARTESIAN_POINT('',(119.89165,-56.8231,0.)); +#264781 = CIRCLE('',#264782,0.5); +#264782 = AXIS2_PLACEMENT_3D('',#264783,#264784,#264785); +#264783 = CARTESIAN_POINT('',(119.89165,-56.3231,0.)); +#264784 = DIRECTION('',(-0.,0.,-1.)); +#264785 = DIRECTION('',(-0.,-1.,0.)); +#264786 = FACE_BOUND('',#264787,.F.); +#264787 = EDGE_LOOP('',(#264788)); +#264788 = ORIENTED_EDGE('',*,*,#264789,.T.); +#264789 = EDGE_CURVE('',#264790,#264790,#264792,.T.); +#264790 = VERTEX_POINT('',#264791); +#264791 = CARTESIAN_POINT('',(122.43165,-56.8231,0.)); +#264792 = CIRCLE('',#264793,0.5); +#264793 = AXIS2_PLACEMENT_3D('',#264794,#264795,#264796); +#264794 = CARTESIAN_POINT('',(122.43165,-56.3231,0.)); +#264795 = DIRECTION('',(-0.,0.,-1.)); +#264796 = DIRECTION('',(-0.,-1.,0.)); +#264797 = FACE_BOUND('',#264798,.F.); +#264798 = EDGE_LOOP('',(#264799)); +#264799 = ORIENTED_EDGE('',*,*,#264800,.T.); +#264800 = EDGE_CURVE('',#264801,#264801,#264803,.T.); +#264801 = VERTEX_POINT('',#264802); +#264802 = CARTESIAN_POINT('',(124.97165,-56.8231,0.)); +#264803 = CIRCLE('',#264804,0.5); +#264804 = AXIS2_PLACEMENT_3D('',#264805,#264806,#264807); +#264805 = CARTESIAN_POINT('',(124.97165,-56.3231,0.)); +#264806 = DIRECTION('',(-0.,0.,-1.)); +#264807 = DIRECTION('',(-0.,-1.,0.)); +#264808 = FACE_BOUND('',#264809,.F.); +#264809 = EDGE_LOOP('',(#264810)); +#264810 = ORIENTED_EDGE('',*,*,#264811,.T.); +#264811 = EDGE_CURVE('',#264812,#264812,#264814,.T.); +#264812 = VERTEX_POINT('',#264813); +#264813 = CARTESIAN_POINT('',(127.51165,-56.8231,0.)); +#264814 = CIRCLE('',#264815,0.5); +#264815 = AXIS2_PLACEMENT_3D('',#264816,#264817,#264818); +#264816 = CARTESIAN_POINT('',(127.51165,-56.3231,0.)); +#264817 = DIRECTION('',(-0.,0.,-1.)); +#264818 = DIRECTION('',(-0.,-1.,0.)); +#264819 = FACE_BOUND('',#264820,.F.); +#264820 = EDGE_LOOP('',(#264821)); +#264821 = ORIENTED_EDGE('',*,*,#264822,.T.); +#264822 = EDGE_CURVE('',#264823,#264823,#264825,.T.); +#264823 = VERTEX_POINT('',#264824); +#264824 = CARTESIAN_POINT('',(130.05165,-56.8231,0.)); +#264825 = CIRCLE('',#264826,0.5); +#264826 = AXIS2_PLACEMENT_3D('',#264827,#264828,#264829); +#264827 = CARTESIAN_POINT('',(130.05165,-56.3231,0.)); +#264828 = DIRECTION('',(-0.,0.,-1.)); +#264829 = DIRECTION('',(-0.,-1.,0.)); +#264830 = FACE_BOUND('',#264831,.F.); +#264831 = EDGE_LOOP('',(#264832)); +#264832 = ORIENTED_EDGE('',*,*,#264833,.T.); +#264833 = EDGE_CURVE('',#264834,#264834,#264836,.T.); +#264834 = VERTEX_POINT('',#264835); +#264835 = CARTESIAN_POINT('',(132.59165,-56.8231,0.)); +#264836 = CIRCLE('',#264837,0.5); +#264837 = AXIS2_PLACEMENT_3D('',#264838,#264839,#264840); +#264838 = CARTESIAN_POINT('',(132.59165,-56.3231,0.)); +#264839 = DIRECTION('',(-0.,0.,-1.)); +#264840 = DIRECTION('',(-0.,-1.,0.)); +#264841 = FACE_BOUND('',#264842,.F.); +#264842 = EDGE_LOOP('',(#264843)); +#264843 = ORIENTED_EDGE('',*,*,#264844,.T.); +#264844 = EDGE_CURVE('',#264845,#264845,#264847,.T.); +#264845 = VERTEX_POINT('',#264846); +#264846 = CARTESIAN_POINT('',(135.13165,-56.8231,0.)); +#264847 = CIRCLE('',#264848,0.5); +#264848 = AXIS2_PLACEMENT_3D('',#264849,#264850,#264851); +#264849 = CARTESIAN_POINT('',(135.13165,-56.3231,0.)); +#264850 = DIRECTION('',(-0.,0.,-1.)); +#264851 = DIRECTION('',(-0.,-1.,0.)); +#264852 = FACE_BOUND('',#264853,.F.); +#264853 = EDGE_LOOP('',(#264854)); +#264854 = ORIENTED_EDGE('',*,*,#264855,.T.); +#264855 = EDGE_CURVE('',#264856,#264856,#264858,.T.); +#264856 = VERTEX_POINT('',#264857); +#264857 = CARTESIAN_POINT('',(137.67165,-56.8231,0.)); +#264858 = CIRCLE('',#264859,0.5); +#264859 = AXIS2_PLACEMENT_3D('',#264860,#264861,#264862); +#264860 = CARTESIAN_POINT('',(137.67165,-56.3231,0.)); +#264861 = DIRECTION('',(-0.,0.,-1.)); +#264862 = DIRECTION('',(-0.,-1.,0.)); +#264863 = FACE_BOUND('',#264864,.F.); +#264864 = EDGE_LOOP('',(#264865)); +#264865 = ORIENTED_EDGE('',*,*,#264866,.T.); +#264866 = EDGE_CURVE('',#264867,#264867,#264869,.T.); +#264867 = VERTEX_POINT('',#264868); +#264868 = CARTESIAN_POINT('',(140.21165,-56.8231,0.)); +#264869 = CIRCLE('',#264870,0.5); +#264870 = AXIS2_PLACEMENT_3D('',#264871,#264872,#264873); +#264871 = CARTESIAN_POINT('',(140.21165,-56.3231,0.)); +#264872 = DIRECTION('',(-0.,0.,-1.)); +#264873 = DIRECTION('',(-0.,-1.,0.)); +#264874 = FACE_BOUND('',#264875,.F.); +#264875 = EDGE_LOOP('',(#264876)); +#264876 = ORIENTED_EDGE('',*,*,#264877,.T.); +#264877 = EDGE_CURVE('',#264878,#264878,#264880,.T.); +#264878 = VERTEX_POINT('',#264879); +#264879 = CARTESIAN_POINT('',(142.75165,-56.8231,0.)); +#264880 = CIRCLE('',#264881,0.5); +#264881 = AXIS2_PLACEMENT_3D('',#264882,#264883,#264884); +#264882 = CARTESIAN_POINT('',(142.75165,-56.3231,0.)); +#264883 = DIRECTION('',(-0.,0.,-1.)); +#264884 = DIRECTION('',(-0.,-1.,0.)); +#264885 = FACE_BOUND('',#264886,.F.); +#264886 = EDGE_LOOP('',(#264887)); +#264887 = ORIENTED_EDGE('',*,*,#264888,.T.); +#264888 = EDGE_CURVE('',#264889,#264889,#264891,.T.); +#264889 = VERTEX_POINT('',#264890); +#264890 = CARTESIAN_POINT('',(145.29165,-56.8231,0.)); +#264891 = CIRCLE('',#264892,0.5); +#264892 = AXIS2_PLACEMENT_3D('',#264893,#264894,#264895); +#264893 = CARTESIAN_POINT('',(145.29165,-56.3231,0.)); +#264894 = DIRECTION('',(-0.,0.,-1.)); +#264895 = DIRECTION('',(-0.,-1.,0.)); +#264896 = FACE_BOUND('',#264897,.F.); +#264897 = EDGE_LOOP('',(#264898)); +#264898 = ORIENTED_EDGE('',*,*,#264899,.T.); +#264899 = EDGE_CURVE('',#264900,#264900,#264902,.T.); +#264900 = VERTEX_POINT('',#264901); +#264901 = CARTESIAN_POINT('',(147.83165,-56.8231,0.)); +#264902 = CIRCLE('',#264903,0.5); +#264903 = AXIS2_PLACEMENT_3D('',#264904,#264905,#264906); +#264904 = CARTESIAN_POINT('',(147.83165,-56.3231,0.)); +#264905 = DIRECTION('',(-0.,0.,-1.)); +#264906 = DIRECTION('',(-0.,-1.,0.)); +#264907 = FACE_BOUND('',#264908,.F.); +#264908 = EDGE_LOOP('',(#264909)); +#264909 = ORIENTED_EDGE('',*,*,#264910,.T.); +#264910 = EDGE_CURVE('',#264911,#264911,#264913,.T.); +#264911 = VERTEX_POINT('',#264912); +#264912 = CARTESIAN_POINT('',(116.19165,-46.7981,0.)); +#264913 = CIRCLE('',#264914,0.475); +#264914 = AXIS2_PLACEMENT_3D('',#264915,#264916,#264917); +#264915 = CARTESIAN_POINT('',(116.19165,-46.3231,0.)); +#264916 = DIRECTION('',(-0.,0.,-1.)); +#264917 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264918 = FACE_BOUND('',#264919,.F.); +#264919 = EDGE_LOOP('',(#264920)); +#264920 = ORIENTED_EDGE('',*,*,#264921,.T.); +#264921 = EDGE_CURVE('',#264922,#264922,#264924,.T.); +#264922 = VERTEX_POINT('',#264923); +#264923 = CARTESIAN_POINT('',(118.69165,-46.7981,0.)); +#264924 = CIRCLE('',#264925,0.475); +#264925 = AXIS2_PLACEMENT_3D('',#264926,#264927,#264928); +#264926 = CARTESIAN_POINT('',(118.69165,-46.3231,0.)); +#264927 = DIRECTION('',(-0.,0.,-1.)); +#264928 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264929 = FACE_BOUND('',#264930,.F.); +#264930 = EDGE_LOOP('',(#264931)); +#264931 = ORIENTED_EDGE('',*,*,#264932,.T.); +#264932 = EDGE_CURVE('',#264933,#264933,#264935,.T.); +#264933 = VERTEX_POINT('',#264934); +#264934 = CARTESIAN_POINT('',(121.19165,-46.7981,0.)); +#264935 = CIRCLE('',#264936,0.475); +#264936 = AXIS2_PLACEMENT_3D('',#264937,#264938,#264939); +#264937 = CARTESIAN_POINT('',(121.19165,-46.3231,0.)); +#264938 = DIRECTION('',(-0.,0.,-1.)); +#264939 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264940 = FACE_BOUND('',#264941,.F.); +#264941 = EDGE_LOOP('',(#264942)); +#264942 = ORIENTED_EDGE('',*,*,#264943,.T.); +#264943 = EDGE_CURVE('',#264944,#264944,#264946,.T.); +#264944 = VERTEX_POINT('',#264945); +#264945 = CARTESIAN_POINT('',(127.19165,-46.8231,0.)); +#264946 = CIRCLE('',#264947,0.5); +#264947 = AXIS2_PLACEMENT_3D('',#264948,#264949,#264950); +#264948 = CARTESIAN_POINT('',(127.19165,-46.3231,0.)); +#264949 = DIRECTION('',(-0.,0.,-1.)); +#264950 = DIRECTION('',(-0.,-1.,0.)); +#264951 = FACE_BOUND('',#264952,.F.); +#264952 = EDGE_LOOP('',(#264953)); +#264953 = ORIENTED_EDGE('',*,*,#264954,.T.); +#264954 = EDGE_CURVE('',#264955,#264955,#264957,.T.); +#264955 = VERTEX_POINT('',#264956); +#264956 = CARTESIAN_POINT('',(129.69165,-46.8231,0.)); +#264957 = CIRCLE('',#264958,0.5); +#264958 = AXIS2_PLACEMENT_3D('',#264959,#264960,#264961); +#264959 = CARTESIAN_POINT('',(129.69165,-46.3231,0.)); +#264960 = DIRECTION('',(-0.,0.,-1.)); +#264961 = DIRECTION('',(-0.,-1.,0.)); +#264962 = FACE_BOUND('',#264963,.F.); +#264963 = EDGE_LOOP('',(#264964)); +#264964 = ORIENTED_EDGE('',*,*,#264965,.T.); +#264965 = EDGE_CURVE('',#264966,#264966,#264968,.T.); +#264966 = VERTEX_POINT('',#264967); +#264967 = CARTESIAN_POINT('',(135.79165,-46.8231,0.)); +#264968 = CIRCLE('',#264969,0.5); +#264969 = AXIS2_PLACEMENT_3D('',#264970,#264971,#264972); +#264970 = CARTESIAN_POINT('',(135.79165,-46.3231,0.)); +#264971 = DIRECTION('',(-0.,0.,-1.)); +#264972 = DIRECTION('',(-0.,-1.,0.)); +#264973 = FACE_BOUND('',#264974,.F.); +#264974 = EDGE_LOOP('',(#264975)); +#264975 = ORIENTED_EDGE('',*,*,#264976,.T.); +#264976 = EDGE_CURVE('',#264977,#264977,#264979,.T.); +#264977 = VERTEX_POINT('',#264978); +#264978 = CARTESIAN_POINT('',(138.29165,-46.8231,0.)); +#264979 = CIRCLE('',#264980,0.5); +#264980 = AXIS2_PLACEMENT_3D('',#264981,#264982,#264983); +#264981 = CARTESIAN_POINT('',(138.29165,-46.3231,0.)); +#264982 = DIRECTION('',(-0.,0.,-1.)); +#264983 = DIRECTION('',(-0.,-1.,0.)); +#264984 = FACE_BOUND('',#264985,.F.); +#264985 = EDGE_LOOP('',(#264986)); +#264986 = ORIENTED_EDGE('',*,*,#264987,.T.); +#264987 = EDGE_CURVE('',#264988,#264988,#264990,.T.); +#264988 = VERTEX_POINT('',#264989); +#264989 = CARTESIAN_POINT('',(148.27165,-81.8231,0.)); +#264990 = CIRCLE('',#264991,0.5); +#264991 = AXIS2_PLACEMENT_3D('',#264992,#264993,#264994); +#264992 = CARTESIAN_POINT('',(148.27165,-81.3231,0.)); +#264993 = DIRECTION('',(-0.,0.,-1.)); +#264994 = DIRECTION('',(-0.,-1.,0.)); +#264995 = FACE_BOUND('',#264996,.F.); +#264996 = EDGE_LOOP('',(#264997)); +#264997 = ORIENTED_EDGE('',*,*,#264998,.T.); +#264998 = EDGE_CURVE('',#264999,#264999,#265001,.T.); +#264999 = VERTEX_POINT('',#265000); +#265000 = CARTESIAN_POINT('',(150.81165,-81.8231,0.)); +#265001 = CIRCLE('',#265002,0.5); +#265002 = AXIS2_PLACEMENT_3D('',#265003,#265004,#265005); +#265003 = CARTESIAN_POINT('',(150.81165,-81.3231,0.)); +#265004 = DIRECTION('',(-0.,0.,-1.)); +#265005 = DIRECTION('',(-0.,-1.,0.)); +#265006 = FACE_BOUND('',#265007,.F.); +#265007 = EDGE_LOOP('',(#265008)); +#265008 = ORIENTED_EDGE('',*,*,#265009,.T.); +#265009 = EDGE_CURVE('',#265010,#265010,#265012,.T.); +#265010 = VERTEX_POINT('',#265011); +#265011 = CARTESIAN_POINT('',(174.19165,-91.2231,0.)); +#265012 = CIRCLE('',#265013,0.4); +#265013 = AXIS2_PLACEMENT_3D('',#265014,#265015,#265016); +#265014 = CARTESIAN_POINT('',(174.19165,-90.8231,0.)); +#265015 = DIRECTION('',(-0.,0.,-1.)); +#265016 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265017 = FACE_BOUND('',#265018,.F.); +#265018 = EDGE_LOOP('',(#265019)); +#265019 = ORIENTED_EDGE('',*,*,#265020,.T.); +#265020 = EDGE_CURVE('',#265021,#265021,#265023,.T.); +#265021 = VERTEX_POINT('',#265022); +#265022 = CARTESIAN_POINT('',(174.19165,-89.2231,0.)); +#265023 = CIRCLE('',#265024,0.4); +#265024 = AXIS2_PLACEMENT_3D('',#265025,#265026,#265027); +#265025 = CARTESIAN_POINT('',(174.19165,-88.8231,0.)); +#265026 = DIRECTION('',(-0.,0.,-1.)); +#265027 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265028 = FACE_BOUND('',#265029,.F.); +#265029 = EDGE_LOOP('',(#265030)); +#265030 = ORIENTED_EDGE('',*,*,#265031,.T.); +#265031 = EDGE_CURVE('',#265032,#265032,#265034,.T.); +#265032 = VERTEX_POINT('',#265033); +#265033 = CARTESIAN_POINT('',(174.19165,-87.2231,0.)); +#265034 = CIRCLE('',#265035,0.4); +#265035 = AXIS2_PLACEMENT_3D('',#265036,#265037,#265038); +#265036 = CARTESIAN_POINT('',(174.19165,-86.8231,0.)); +#265037 = DIRECTION('',(-0.,0.,-1.)); +#265038 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265039 = FACE_BOUND('',#265040,.F.); +#265040 = EDGE_LOOP('',(#265041)); +#265041 = ORIENTED_EDGE('',*,*,#265042,.T.); +#265042 = EDGE_CURVE('',#265043,#265043,#265045,.T.); +#265043 = VERTEX_POINT('',#265044); +#265044 = CARTESIAN_POINT('',(174.19165,-85.2231,0.)); +#265045 = CIRCLE('',#265046,0.4); +#265046 = AXIS2_PLACEMENT_3D('',#265047,#265048,#265049); +#265047 = CARTESIAN_POINT('',(174.19165,-84.8231,0.)); +#265048 = DIRECTION('',(-0.,0.,-1.)); +#265049 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265050 = FACE_BOUND('',#265051,.F.); +#265051 = EDGE_LOOP('',(#265052)); +#265052 = ORIENTED_EDGE('',*,*,#265053,.T.); +#265053 = EDGE_CURVE('',#265054,#265054,#265056,.T.); +#265054 = VERTEX_POINT('',#265055); +#265055 = CARTESIAN_POINT('',(174.19165,-83.2231,0.)); +#265056 = CIRCLE('',#265057,0.4); +#265057 = AXIS2_PLACEMENT_3D('',#265058,#265059,#265060); +#265058 = CARTESIAN_POINT('',(174.19165,-82.8231,0.)); +#265059 = DIRECTION('',(-0.,0.,-1.)); +#265060 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265061 = FACE_BOUND('',#265062,.F.); +#265062 = EDGE_LOOP('',(#265063)); +#265063 = ORIENTED_EDGE('',*,*,#265064,.T.); +#265064 = EDGE_CURVE('',#265065,#265065,#265067,.T.); +#265065 = VERTEX_POINT('',#265066); +#265066 = CARTESIAN_POINT('',(174.19165,-81.2231,0.)); +#265067 = CIRCLE('',#265068,0.4); +#265068 = AXIS2_PLACEMENT_3D('',#265069,#265070,#265071); +#265069 = CARTESIAN_POINT('',(174.19165,-80.8231,0.)); +#265070 = DIRECTION('',(-0.,0.,-1.)); +#265071 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265072 = FACE_BOUND('',#265073,.F.); +#265073 = EDGE_LOOP('',(#265074)); +#265074 = ORIENTED_EDGE('',*,*,#265075,.T.); +#265075 = EDGE_CURVE('',#265076,#265076,#265078,.T.); +#265076 = VERTEX_POINT('',#265077); +#265077 = CARTESIAN_POINT('',(150.37165,-74.6031,0.)); +#265078 = CIRCLE('',#265079,0.5); +#265079 = AXIS2_PLACEMENT_3D('',#265080,#265081,#265082); +#265080 = CARTESIAN_POINT('',(150.37165,-74.1031,0.)); +#265081 = DIRECTION('',(-0.,0.,-1.)); +#265082 = DIRECTION('',(-0.,-1.,0.)); +#265083 = FACE_BOUND('',#265084,.F.); +#265084 = EDGE_LOOP('',(#265085)); +#265085 = ORIENTED_EDGE('',*,*,#265086,.T.); +#265086 = EDGE_CURVE('',#265087,#265087,#265089,.T.); +#265087 = VERTEX_POINT('',#265088); +#265088 = CARTESIAN_POINT('',(152.91165,-74.6031,0.)); +#265089 = CIRCLE('',#265090,0.5); +#265090 = AXIS2_PLACEMENT_3D('',#265091,#265092,#265093); +#265091 = CARTESIAN_POINT('',(152.91165,-74.1031,0.)); +#265092 = DIRECTION('',(-0.,0.,-1.)); +#265093 = DIRECTION('',(-0.,-1.,0.)); +#265094 = FACE_BOUND('',#265095,.F.); +#265095 = EDGE_LOOP('',(#265096)); +#265096 = ORIENTED_EDGE('',*,*,#265097,.T.); +#265097 = EDGE_CURVE('',#265098,#265098,#265100,.T.); +#265098 = VERTEX_POINT('',#265099); +#265099 = CARTESIAN_POINT('',(155.45165,-74.6031,0.)); +#265100 = CIRCLE('',#265101,0.5); +#265101 = AXIS2_PLACEMENT_3D('',#265102,#265103,#265104); +#265102 = CARTESIAN_POINT('',(155.45165,-74.1031,0.)); +#265103 = DIRECTION('',(-0.,0.,-1.)); +#265104 = DIRECTION('',(-0.,-1.,0.)); +#265105 = FACE_BOUND('',#265106,.F.); +#265106 = EDGE_LOOP('',(#265107)); +#265107 = ORIENTED_EDGE('',*,*,#265108,.T.); +#265108 = EDGE_CURVE('',#265109,#265109,#265111,.T.); +#265109 = VERTEX_POINT('',#265110); +#265110 = CARTESIAN_POINT('',(174.19165,-79.2231,0.)); +#265111 = CIRCLE('',#265112,0.4); +#265112 = AXIS2_PLACEMENT_3D('',#265113,#265114,#265115); +#265113 = CARTESIAN_POINT('',(174.19165,-78.8231,0.)); +#265114 = DIRECTION('',(-0.,0.,-1.)); +#265115 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265116 = FACE_BOUND('',#265117,.F.); +#265117 = EDGE_LOOP('',(#265118)); +#265118 = ORIENTED_EDGE('',*,*,#265119,.T.); +#265119 = EDGE_CURVE('',#265120,#265120,#265122,.T.); +#265120 = VERTEX_POINT('',#265121); +#265121 = CARTESIAN_POINT('',(174.19165,-77.2231,0.)); +#265122 = CIRCLE('',#265123,0.4); +#265123 = AXIS2_PLACEMENT_3D('',#265124,#265125,#265126); +#265124 = CARTESIAN_POINT('',(174.19165,-76.8231,0.)); +#265125 = DIRECTION('',(-0.,0.,-1.)); +#265126 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265127 = FACE_BOUND('',#265128,.F.); +#265128 = EDGE_LOOP('',(#265129)); +#265129 = ORIENTED_EDGE('',*,*,#265130,.T.); +#265130 = EDGE_CURVE('',#265131,#265131,#265133,.T.); +#265131 = VERTEX_POINT('',#265132); +#265132 = CARTESIAN_POINT('',(174.19165,-75.2231,0.)); +#265133 = CIRCLE('',#265134,0.4); +#265134 = AXIS2_PLACEMENT_3D('',#265135,#265136,#265137); +#265135 = CARTESIAN_POINT('',(174.19165,-74.8231,0.)); +#265136 = DIRECTION('',(-0.,0.,-1.)); +#265137 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265138 = FACE_BOUND('',#265139,.F.); +#265139 = EDGE_LOOP('',(#265140)); +#265140 = ORIENTED_EDGE('',*,*,#265141,.T.); +#265141 = EDGE_CURVE('',#265142,#265142,#265144,.T.); +#265142 = VERTEX_POINT('',#265143); +#265143 = CARTESIAN_POINT('',(196.54165,-91.2231,0.)); +#265144 = CIRCLE('',#265145,0.4); +#265145 = AXIS2_PLACEMENT_3D('',#265146,#265147,#265148); +#265146 = CARTESIAN_POINT('',(196.54165,-90.8231,0.)); +#265147 = DIRECTION('',(-0.,0.,-1.)); +#265148 = DIRECTION('',(-0.,-1.,0.)); +#265149 = FACE_BOUND('',#265150,.F.); +#265150 = EDGE_LOOP('',(#265151)); +#265151 = ORIENTED_EDGE('',*,*,#265152,.T.); +#265152 = EDGE_CURVE('',#265153,#265153,#265155,.T.); +#265153 = VERTEX_POINT('',#265154); +#265154 = CARTESIAN_POINT('',(196.54165,-89.2231,0.)); +#265155 = CIRCLE('',#265156,0.4); +#265156 = AXIS2_PLACEMENT_3D('',#265157,#265158,#265159); +#265157 = CARTESIAN_POINT('',(196.54165,-88.8231,0.)); +#265158 = DIRECTION('',(-0.,0.,-1.)); +#265159 = DIRECTION('',(-0.,-1.,0.)); +#265160 = FACE_BOUND('',#265161,.F.); +#265161 = EDGE_LOOP('',(#265162)); +#265162 = ORIENTED_EDGE('',*,*,#265163,.T.); +#265163 = EDGE_CURVE('',#265164,#265164,#265166,.T.); +#265164 = VERTEX_POINT('',#265165); +#265165 = CARTESIAN_POINT('',(196.54165,-87.2231,0.)); +#265166 = CIRCLE('',#265167,0.4); +#265167 = AXIS2_PLACEMENT_3D('',#265168,#265169,#265170); +#265168 = CARTESIAN_POINT('',(196.54165,-86.8231,0.)); +#265169 = DIRECTION('',(-0.,0.,-1.)); +#265170 = DIRECTION('',(-0.,-1.,0.)); +#265171 = FACE_BOUND('',#265172,.F.); +#265172 = EDGE_LOOP('',(#265173)); +#265173 = ORIENTED_EDGE('',*,*,#265174,.T.); +#265174 = EDGE_CURVE('',#265175,#265175,#265177,.T.); +#265175 = VERTEX_POINT('',#265176); +#265176 = CARTESIAN_POINT('',(196.54165,-85.2231,0.)); +#265177 = CIRCLE('',#265178,0.4); +#265178 = AXIS2_PLACEMENT_3D('',#265179,#265180,#265181); +#265179 = CARTESIAN_POINT('',(196.54165,-84.8231,0.)); +#265180 = DIRECTION('',(-0.,0.,-1.)); +#265181 = DIRECTION('',(-0.,-1.,0.)); +#265182 = FACE_BOUND('',#265183,.F.); +#265183 = EDGE_LOOP('',(#265184)); +#265184 = ORIENTED_EDGE('',*,*,#265185,.T.); +#265185 = EDGE_CURVE('',#265186,#265186,#265188,.T.); +#265186 = VERTEX_POINT('',#265187); +#265187 = CARTESIAN_POINT('',(196.54165,-83.2231,0.)); +#265188 = CIRCLE('',#265189,0.4); +#265189 = AXIS2_PLACEMENT_3D('',#265190,#265191,#265192); +#265190 = CARTESIAN_POINT('',(196.54165,-82.8231,0.)); +#265191 = DIRECTION('',(-0.,0.,-1.)); +#265192 = DIRECTION('',(-0.,-1.,0.)); +#265193 = FACE_BOUND('',#265194,.F.); +#265194 = EDGE_LOOP('',(#265195)); +#265195 = ORIENTED_EDGE('',*,*,#265196,.T.); +#265196 = EDGE_CURVE('',#265197,#265197,#265199,.T.); +#265197 = VERTEX_POINT('',#265198); +#265198 = CARTESIAN_POINT('',(196.54165,-81.2231,0.)); +#265199 = CIRCLE('',#265200,0.4); +#265200 = AXIS2_PLACEMENT_3D('',#265201,#265202,#265203); +#265201 = CARTESIAN_POINT('',(196.54165,-80.8231,0.)); +#265202 = DIRECTION('',(-0.,0.,-1.)); +#265203 = DIRECTION('',(-0.,-1.,0.)); +#265204 = FACE_BOUND('',#265205,.F.); +#265205 = EDGE_LOOP('',(#265206)); +#265206 = ORIENTED_EDGE('',*,*,#265207,.T.); +#265207 = EDGE_CURVE('',#265208,#265208,#265210,.T.); +#265208 = VERTEX_POINT('',#265209); +#265209 = CARTESIAN_POINT('',(210.19165,-90.7981,0.)); +#265210 = CIRCLE('',#265211,0.475); +#265211 = AXIS2_PLACEMENT_3D('',#265212,#265213,#265214); +#265212 = CARTESIAN_POINT('',(210.19165,-90.3231,0.)); +#265213 = DIRECTION('',(-0.,0.,-1.)); +#265214 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265215 = FACE_BOUND('',#265216,.F.); +#265216 = EDGE_LOOP('',(#265217)); +#265217 = ORIENTED_EDGE('',*,*,#265218,.T.); +#265218 = EDGE_CURVE('',#265219,#265219,#265221,.T.); +#265219 = VERTEX_POINT('',#265220); +#265220 = CARTESIAN_POINT('',(210.19165,-88.2981,0.)); +#265221 = CIRCLE('',#265222,0.475); +#265222 = AXIS2_PLACEMENT_3D('',#265223,#265224,#265225); +#265223 = CARTESIAN_POINT('',(210.19165,-87.8231,0.)); +#265224 = DIRECTION('',(-0.,0.,-1.)); +#265225 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265226 = FACE_BOUND('',#265227,.F.); +#265227 = EDGE_LOOP('',(#265228)); +#265228 = ORIENTED_EDGE('',*,*,#265229,.T.); +#265229 = EDGE_CURVE('',#265230,#265230,#265232,.T.); +#265230 = VERTEX_POINT('',#265231); +#265231 = CARTESIAN_POINT('',(210.16665,-80.5731,0.)); +#265232 = CIRCLE('',#265233,0.5); +#265233 = AXIS2_PLACEMENT_3D('',#265234,#265235,#265236); +#265234 = CARTESIAN_POINT('',(210.16665,-80.0731,0.)); +#265235 = DIRECTION('',(-0.,0.,-1.)); +#265236 = DIRECTION('',(-0.,-1.,0.)); +#265237 = FACE_BOUND('',#265238,.F.); +#265238 = EDGE_LOOP('',(#265239)); +#265239 = ORIENTED_EDGE('',*,*,#265240,.T.); +#265240 = EDGE_CURVE('',#265241,#265241,#265243,.T.); +#265241 = VERTEX_POINT('',#265242); +#265242 = CARTESIAN_POINT('',(196.54165,-79.2231,0.)); +#265243 = CIRCLE('',#265244,0.4); +#265244 = AXIS2_PLACEMENT_3D('',#265245,#265246,#265247); +#265245 = CARTESIAN_POINT('',(196.54165,-78.8231,0.)); +#265246 = DIRECTION('',(-0.,0.,-1.)); +#265247 = DIRECTION('',(-0.,-1.,0.)); +#265248 = FACE_BOUND('',#265249,.F.); +#265249 = EDGE_LOOP('',(#265250)); +#265250 = ORIENTED_EDGE('',*,*,#265251,.T.); +#265251 = EDGE_CURVE('',#265252,#265252,#265254,.T.); +#265252 = VERTEX_POINT('',#265253); +#265253 = CARTESIAN_POINT('',(196.54165,-77.2231,0.)); +#265254 = CIRCLE('',#265255,0.4); +#265255 = AXIS2_PLACEMENT_3D('',#265256,#265257,#265258); +#265256 = CARTESIAN_POINT('',(196.54165,-76.8231,0.)); +#265257 = DIRECTION('',(-0.,0.,-1.)); +#265258 = DIRECTION('',(-0.,-1.,0.)); +#265259 = FACE_BOUND('',#265260,.F.); +#265260 = EDGE_LOOP('',(#265261)); +#265261 = ORIENTED_EDGE('',*,*,#265262,.T.); +#265262 = EDGE_CURVE('',#265263,#265263,#265265,.T.); +#265263 = VERTEX_POINT('',#265264); +#265264 = CARTESIAN_POINT('',(196.54165,-75.2231,0.)); +#265265 = CIRCLE('',#265266,0.4); +#265266 = AXIS2_PLACEMENT_3D('',#265267,#265268,#265269); +#265267 = CARTESIAN_POINT('',(196.54165,-74.8231,0.)); +#265268 = DIRECTION('',(-0.,0.,-1.)); +#265269 = DIRECTION('',(-0.,-1.,0.)); +#265270 = FACE_BOUND('',#265271,.F.); +#265271 = EDGE_LOOP('',(#265272)); +#265272 = ORIENTED_EDGE('',*,*,#265273,.T.); +#265273 = EDGE_CURVE('',#265274,#265274,#265276,.T.); +#265274 = VERTEX_POINT('',#265275); +#265275 = CARTESIAN_POINT('',(210.16665,-78.0731,0.)); +#265276 = CIRCLE('',#265277,0.5); +#265277 = AXIS2_PLACEMENT_3D('',#265278,#265279,#265280); +#265278 = CARTESIAN_POINT('',(210.16665,-77.5731,0.)); +#265279 = DIRECTION('',(-0.,0.,-1.)); +#265280 = DIRECTION('',(-0.,-1.,0.)); +#265281 = FACE_BOUND('',#265282,.F.); +#265282 = EDGE_LOOP('',(#265283)); +#265283 = ORIENTED_EDGE('',*,*,#265284,.T.); +#265284 = EDGE_CURVE('',#265285,#265285,#265287,.T.); +#265285 = VERTEX_POINT('',#265286); +#265286 = CARTESIAN_POINT('',(210.16665,-71.3231,0.)); +#265287 = CIRCLE('',#265288,0.5); +#265288 = AXIS2_PLACEMENT_3D('',#265289,#265290,#265291); +#265289 = CARTESIAN_POINT('',(210.16665,-70.8231,0.)); +#265290 = DIRECTION('',(-0.,0.,-1.)); +#265291 = DIRECTION('',(-0.,-1.,0.)); +#265292 = FACE_BOUND('',#265293,.F.); +#265293 = EDGE_LOOP('',(#265294)); +#265294 = ORIENTED_EDGE('',*,*,#265295,.T.); +#265295 = EDGE_CURVE('',#265296,#265296,#265298,.T.); +#265296 = VERTEX_POINT('',#265297); +#265297 = CARTESIAN_POINT('',(210.16665,-68.8231,0.)); +#265298 = CIRCLE('',#265299,0.5); +#265299 = AXIS2_PLACEMENT_3D('',#265300,#265301,#265302); +#265300 = CARTESIAN_POINT('',(210.16665,-68.3231,0.)); +#265301 = DIRECTION('',(-0.,0.,-1.)); +#265302 = DIRECTION('',(-0.,-1.,0.)); +#265303 = FACE_BOUND('',#265304,.F.); +#265304 = EDGE_LOOP('',(#265305)); +#265305 = ORIENTED_EDGE('',*,*,#265306,.T.); +#265306 = EDGE_CURVE('',#265307,#265307,#265309,.T.); +#265307 = VERTEX_POINT('',#265308); +#265308 = CARTESIAN_POINT('',(150.37165,-56.8231,0.)); +#265309 = CIRCLE('',#265310,0.5); +#265310 = AXIS2_PLACEMENT_3D('',#265311,#265312,#265313); +#265311 = CARTESIAN_POINT('',(150.37165,-56.3231,0.)); +#265312 = DIRECTION('',(-0.,0.,-1.)); +#265313 = DIRECTION('',(-0.,-1.,0.)); +#265314 = FACE_BOUND('',#265315,.F.); +#265315 = EDGE_LOOP('',(#265316)); +#265316 = ORIENTED_EDGE('',*,*,#265317,.T.); +#265317 = EDGE_CURVE('',#265318,#265318,#265320,.T.); +#265318 = VERTEX_POINT('',#265319); +#265319 = CARTESIAN_POINT('',(152.91165,-56.8231,0.)); +#265320 = CIRCLE('',#265321,0.5); +#265321 = AXIS2_PLACEMENT_3D('',#265322,#265323,#265324); +#265322 = CARTESIAN_POINT('',(152.91165,-56.3231,0.)); +#265323 = DIRECTION('',(-0.,0.,-1.)); +#265324 = DIRECTION('',(-0.,-1.,0.)); +#265325 = FACE_BOUND('',#265326,.F.); +#265326 = EDGE_LOOP('',(#265327)); +#265327 = ORIENTED_EDGE('',*,*,#265328,.T.); +#265328 = EDGE_CURVE('',#265329,#265329,#265331,.T.); +#265329 = VERTEX_POINT('',#265330); +#265330 = CARTESIAN_POINT('',(155.45165,-56.8231,0.)); +#265331 = CIRCLE('',#265332,0.5); +#265332 = AXIS2_PLACEMENT_3D('',#265333,#265334,#265335); +#265333 = CARTESIAN_POINT('',(155.45165,-56.3231,0.)); +#265334 = DIRECTION('',(-0.,0.,-1.)); +#265335 = DIRECTION('',(-0.,-1.,0.)); +#265336 = FACE_BOUND('',#265337,.F.); +#265337 = EDGE_LOOP('',(#265338)); +#265338 = ORIENTED_EDGE('',*,*,#265339,.T.); +#265339 = EDGE_CURVE('',#265340,#265340,#265342,.T.); +#265340 = VERTEX_POINT('',#265341); +#265341 = CARTESIAN_POINT('',(189.28415,-66.5256,0.)); +#265342 = CIRCLE('',#265343,0.5); +#265343 = AXIS2_PLACEMENT_3D('',#265344,#265345,#265346); +#265344 = CARTESIAN_POINT('',(189.28415,-66.0256,0.)); +#265345 = DIRECTION('',(-0.,0.,-1.)); +#265346 = DIRECTION('',(-0.,-1.,0.)); +#265347 = FACE_BOUND('',#265348,.F.); +#265348 = EDGE_LOOP('',(#265349)); +#265349 = ORIENTED_EDGE('',*,*,#265350,.T.); +#265350 = EDGE_CURVE('',#265351,#265351,#265353,.T.); +#265351 = VERTEX_POINT('',#265352); +#265352 = CARTESIAN_POINT('',(194.36415,-66.5256,0.)); +#265353 = CIRCLE('',#265354,0.5); +#265354 = AXIS2_PLACEMENT_3D('',#265355,#265356,#265357); +#265355 = CARTESIAN_POINT('',(194.36415,-66.0256,0.)); +#265356 = DIRECTION('',(-0.,0.,-1.)); +#265357 = DIRECTION('',(-0.,-1.,0.)); +#265358 = FACE_BOUND('',#265359,.F.); +#265359 = EDGE_LOOP('',(#265360)); +#265360 = ORIENTED_EDGE('',*,*,#265361,.T.); +#265361 = EDGE_CURVE('',#265362,#265362,#265364,.T.); +#265362 = VERTEX_POINT('',#265363); +#265363 = CARTESIAN_POINT('',(189.28415,-58.9056,0.)); +#265364 = CIRCLE('',#265365,0.5); +#265365 = AXIS2_PLACEMENT_3D('',#265366,#265367,#265368); +#265366 = CARTESIAN_POINT('',(189.28415,-58.4056,0.)); +#265367 = DIRECTION('',(-0.,0.,-1.)); +#265368 = DIRECTION('',(-0.,-1.,0.)); +#265369 = FACE_BOUND('',#265370,.F.); +#265370 = EDGE_LOOP('',(#265371)); +#265371 = ORIENTED_EDGE('',*,*,#265372,.T.); +#265372 = EDGE_CURVE('',#265373,#265373,#265375,.T.); +#265373 = VERTEX_POINT('',#265374); +#265374 = CARTESIAN_POINT('',(189.28415,-56.3656,0.)); +#265375 = CIRCLE('',#265376,0.5); +#265376 = AXIS2_PLACEMENT_3D('',#265377,#265378,#265379); +#265377 = CARTESIAN_POINT('',(189.28415,-55.8656,0.)); +#265378 = DIRECTION('',(-0.,0.,-1.)); +#265379 = DIRECTION('',(-0.,-1.,0.)); +#265380 = FACE_BOUND('',#265381,.F.); +#265381 = EDGE_LOOP('',(#265382)); +#265382 = ORIENTED_EDGE('',*,*,#265383,.T.); +#265383 = EDGE_CURVE('',#265384,#265384,#265386,.T.); +#265384 = VERTEX_POINT('',#265385); +#265385 = CARTESIAN_POINT('',(194.36415,-58.9056,0.)); +#265386 = CIRCLE('',#265387,0.5); +#265387 = AXIS2_PLACEMENT_3D('',#265388,#265389,#265390); +#265388 = CARTESIAN_POINT('',(194.36415,-58.4056,0.)); +#265389 = DIRECTION('',(-0.,0.,-1.)); +#265390 = DIRECTION('',(-0.,-1.,0.)); +#265391 = FACE_BOUND('',#265392,.F.); +#265392 = EDGE_LOOP('',(#265393)); +#265393 = ORIENTED_EDGE('',*,*,#265394,.T.); +#265394 = EDGE_CURVE('',#265395,#265395,#265397,.T.); +#265395 = VERTEX_POINT('',#265396); +#265396 = CARTESIAN_POINT('',(194.36415,-56.3656,0.)); +#265397 = CIRCLE('',#265398,0.5); +#265398 = AXIS2_PLACEMENT_3D('',#265399,#265400,#265401); +#265399 = CARTESIAN_POINT('',(194.36415,-55.8656,0.)); +#265400 = DIRECTION('',(-0.,0.,-1.)); +#265401 = DIRECTION('',(-0.,-1.,0.)); +#265402 = FACE_BOUND('',#265403,.F.); +#265403 = EDGE_LOOP('',(#265404)); +#265404 = ORIENTED_EDGE('',*,*,#265405,.T.); +#265405 = EDGE_CURVE('',#265406,#265406,#265408,.T.); +#265406 = VERTEX_POINT('',#265407); +#265407 = CARTESIAN_POINT('',(210.19165,-62.2981,0.)); +#265408 = CIRCLE('',#265409,0.475); +#265409 = AXIS2_PLACEMENT_3D('',#265410,#265411,#265412); +#265410 = CARTESIAN_POINT('',(210.19165,-61.8231,0.)); +#265411 = DIRECTION('',(-0.,0.,-1.)); +#265412 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265413 = FACE_BOUND('',#265414,.F.); +#265414 = EDGE_LOOP('',(#265415)); +#265415 = ORIENTED_EDGE('',*,*,#265416,.T.); +#265416 = EDGE_CURVE('',#265417,#265417,#265419,.T.); +#265417 = VERTEX_POINT('',#265418); +#265418 = CARTESIAN_POINT('',(210.19165,-59.7981,0.)); +#265419 = CIRCLE('',#265420,0.475); +#265420 = AXIS2_PLACEMENT_3D('',#265421,#265422,#265423); +#265421 = CARTESIAN_POINT('',(210.19165,-59.3231,0.)); +#265422 = DIRECTION('',(-0.,0.,-1.)); +#265423 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265424 = FACE_BOUND('',#265425,.F.); +#265425 = EDGE_LOOP('',(#265426)); +#265426 = ORIENTED_EDGE('',*,*,#265427,.T.); +#265427 = EDGE_CURVE('',#265428,#265428,#265430,.T.); +#265428 = VERTEX_POINT('',#265429); +#265429 = CARTESIAN_POINT('',(210.19165,-57.2981,0.)); +#265430 = CIRCLE('',#265431,0.475); +#265431 = AXIS2_PLACEMENT_3D('',#265432,#265433,#265434); +#265432 = CARTESIAN_POINT('',(210.19165,-56.8231,0.)); +#265433 = DIRECTION('',(-0.,0.,-1.)); +#265434 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265435 = FACE_BOUND('',#265436,.F.); +#265436 = EDGE_LOOP('',(#265437)); +#265437 = ORIENTED_EDGE('',*,*,#265438,.T.); +#265438 = EDGE_CURVE('',#265439,#265439,#265441,.T.); +#265439 = VERTEX_POINT('',#265440); +#265440 = CARTESIAN_POINT('',(210.19165,-54.7981,0.)); +#265441 = CIRCLE('',#265442,0.475); +#265442 = AXIS2_PLACEMENT_3D('',#265443,#265444,#265445); +#265443 = CARTESIAN_POINT('',(210.19165,-54.3231,0.)); +#265444 = DIRECTION('',(-0.,0.,-1.)); +#265445 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265446 = FACE_BOUND('',#265447,.F.); +#265447 = EDGE_LOOP('',(#265448)); +#265448 = ORIENTED_EDGE('',*,*,#265449,.T.); +#265449 = EDGE_CURVE('',#265450,#265450,#265452,.T.); +#265450 = VERTEX_POINT('',#265451); +#265451 = CARTESIAN_POINT('',(211.19165,-46.9231,0.)); +#265452 = CIRCLE('',#265453,1.6); +#265453 = AXIS2_PLACEMENT_3D('',#265454,#265455,#265456); +#265454 = CARTESIAN_POINT('',(211.19165,-45.3231,0.)); +#265455 = DIRECTION('',(-0.,0.,-1.)); +#265456 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#265457 = PLANE('',#265458); +#265458 = AXIS2_PLACEMENT_3D('',#265459,#265460,#265461); +#265459 = CARTESIAN_POINT('',(0.,0.,0.)); +#265460 = DIRECTION('',(0.,0.,1.)); +#265461 = DIRECTION('',(1.,0.,-0.)); +#265462 = ADVANCED_FACE('',(#265463,#265474,#265485,#265496,#265507, + #265518,#265529,#265540,#265551,#265562,#265573,#265584,#265595, + #265606,#265617,#265653,#265664,#265675,#265711,#265722,#265733, + #265744,#265755,#265766,#265777,#265788,#265799,#265835,#265846, + #265857,#265868,#265879,#265890,#265901,#265937,#265948,#265959, + #265970,#265981,#265992,#266003,#266014,#266025,#266036,#266047, + #266058,#266069,#266080,#266091,#266102,#266113,#266124,#266135, + #266146,#266157,#266168,#266179,#266190,#266201,#266212,#266223, + #266234,#266245,#266256,#266267,#266278,#266289,#266300,#266311, + #266322,#266333,#266344,#266355,#266366,#266377,#266388,#266399, + #266410,#266421,#266432,#266443,#266454,#266465,#266476,#266487, + #266498,#266509,#266520,#266531,#266542,#266553,#266564,#266575, + #266586,#266597,#266608,#266619,#266630,#266641,#266652,#266663, + #266674,#266685,#266696,#266707,#266718,#266729,#266740,#266751, + #266762,#266773,#266784,#266795,#266806,#266817,#266828,#266839, + #266850,#266861,#266872,#266883,#266894,#266905,#266916,#266927, + #266938,#266949,#266960,#266971,#266982,#266993,#267004,#267015, + #267026,#267037,#267048,#267059,#267070,#267081,#267092,#267103, + #267114,#267125,#267136,#267147,#267158,#267169,#267180,#267191, + #267202,#267213,#267224,#267235,#267246,#267257,#267268,#267279, + #267290,#267301,#267312,#267323,#267334,#267345),#267356,.T.); +#265463 = FACE_BOUND('',#265464,.T.); +#265464 = EDGE_LOOP('',(#265465,#265466,#265467,#265473)); +#265465 = ORIENTED_EDGE('',*,*,#263475,.F.); +#265466 = ORIENTED_EDGE('',*,*,#263515,.F.); +#265467 = ORIENTED_EDGE('',*,*,#265468,.F.); +#265468 = EDGE_CURVE('',#263538,#263508,#265469,.T.); +#265469 = LINE('',#265470,#265471); +#265470 = CARTESIAN_POINT('',(80.19165,-40.3231,1.51)); +#265471 = VECTOR('',#265472,1.); +#265472 = DIRECTION('',(1.,0.,0.)); +#265473 = ORIENTED_EDGE('',*,*,#263537,.F.); +#265474 = FACE_BOUND('',#265475,.T.); +#265475 = EDGE_LOOP('',(#265476)); +#265476 = ORIENTED_EDGE('',*,*,#265477,.T.); +#265477 = EDGE_CURVE('',#265478,#265478,#265480,.T.); +#265478 = VERTEX_POINT('',#265479); +#265479 = CARTESIAN_POINT('',(85.19165,-136.9231,1.51)); +#265480 = CIRCLE('',#265481,1.6); +#265481 = AXIS2_PLACEMENT_3D('',#265482,#265483,#265484); +#265482 = CARTESIAN_POINT('',(85.19165,-135.3231,1.51)); +#265483 = DIRECTION('',(-0.,0.,-1.)); +#265484 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#265485 = FACE_BOUND('',#265486,.T.); +#265486 = EDGE_LOOP('',(#265487)); +#265487 = ORIENTED_EDGE('',*,*,#265488,.T.); +#265488 = EDGE_CURVE('',#265489,#265489,#265491,.T.); +#265489 = VERTEX_POINT('',#265490); +#265490 = CARTESIAN_POINT('',(115.25165,-130.0831,1.51)); +#265491 = CIRCLE('',#265492,0.5); +#265492 = AXIS2_PLACEMENT_3D('',#265493,#265494,#265495); +#265493 = CARTESIAN_POINT('',(115.25165,-129.5831,1.51)); +#265494 = DIRECTION('',(-0.,0.,-1.)); +#265495 = DIRECTION('',(-0.,-1.,0.)); +#265496 = FACE_BOUND('',#265497,.T.); +#265497 = EDGE_LOOP('',(#265498)); +#265498 = ORIENTED_EDGE('',*,*,#265499,.T.); +#265499 = EDGE_CURVE('',#265500,#265500,#265502,.T.); +#265500 = VERTEX_POINT('',#265501); +#265501 = CARTESIAN_POINT('',(117.79165,-130.0831,1.51)); +#265502 = CIRCLE('',#265503,0.5); +#265503 = AXIS2_PLACEMENT_3D('',#265504,#265505,#265506); +#265504 = CARTESIAN_POINT('',(117.79165,-129.5831,1.51)); +#265505 = DIRECTION('',(-0.,0.,-1.)); +#265506 = DIRECTION('',(-0.,-1.,0.)); +#265507 = FACE_BOUND('',#265508,.T.); +#265508 = EDGE_LOOP('',(#265509)); +#265509 = ORIENTED_EDGE('',*,*,#265510,.T.); +#265510 = EDGE_CURVE('',#265511,#265511,#265513,.T.); +#265511 = VERTEX_POINT('',#265512); +#265512 = CARTESIAN_POINT('',(120.33165,-130.0831,1.51)); +#265513 = CIRCLE('',#265514,0.5); +#265514 = AXIS2_PLACEMENT_3D('',#265515,#265516,#265517); +#265515 = CARTESIAN_POINT('',(120.33165,-129.5831,1.51)); +#265516 = DIRECTION('',(-0.,0.,-1.)); +#265517 = DIRECTION('',(-0.,-1.,0.)); +#265518 = FACE_BOUND('',#265519,.T.); +#265519 = EDGE_LOOP('',(#265520)); +#265520 = ORIENTED_EDGE('',*,*,#265521,.T.); +#265521 = EDGE_CURVE('',#265522,#265522,#265524,.T.); +#265522 = VERTEX_POINT('',#265523); +#265523 = CARTESIAN_POINT('',(122.87165,-130.0831,1.51)); +#265524 = CIRCLE('',#265525,0.5); +#265525 = AXIS2_PLACEMENT_3D('',#265526,#265527,#265528); +#265526 = CARTESIAN_POINT('',(122.87165,-129.5831,1.51)); +#265527 = DIRECTION('',(-0.,0.,-1.)); +#265528 = DIRECTION('',(-0.,-1.,0.)); +#265529 = FACE_BOUND('',#265530,.T.); +#265530 = EDGE_LOOP('',(#265531)); +#265531 = ORIENTED_EDGE('',*,*,#265532,.T.); +#265532 = EDGE_CURVE('',#265533,#265533,#265535,.T.); +#265533 = VERTEX_POINT('',#265534); +#265534 = CARTESIAN_POINT('',(125.41165,-130.0831,1.51)); +#265535 = CIRCLE('',#265536,0.5); +#265536 = AXIS2_PLACEMENT_3D('',#265537,#265538,#265539); +#265537 = CARTESIAN_POINT('',(125.41165,-129.5831,1.51)); +#265538 = DIRECTION('',(-0.,0.,-1.)); +#265539 = DIRECTION('',(-0.,-1.,0.)); +#265540 = FACE_BOUND('',#265541,.T.); +#265541 = EDGE_LOOP('',(#265542)); +#265542 = ORIENTED_EDGE('',*,*,#265543,.T.); +#265543 = EDGE_CURVE('',#265544,#265544,#265546,.T.); +#265544 = VERTEX_POINT('',#265545); +#265545 = CARTESIAN_POINT('',(127.95165,-130.0831,1.51)); +#265546 = CIRCLE('',#265547,0.5); +#265547 = AXIS2_PLACEMENT_3D('',#265548,#265549,#265550); +#265548 = CARTESIAN_POINT('',(127.95165,-129.5831,1.51)); +#265549 = DIRECTION('',(-0.,0.,-1.)); +#265550 = DIRECTION('',(-0.,-1.,0.)); +#265551 = FACE_BOUND('',#265552,.T.); +#265552 = EDGE_LOOP('',(#265553)); +#265553 = ORIENTED_EDGE('',*,*,#265554,.T.); +#265554 = EDGE_CURVE('',#265555,#265555,#265557,.T.); +#265555 = VERTEX_POINT('',#265556); +#265556 = CARTESIAN_POINT('',(130.49165,-130.0831,1.51)); +#265557 = CIRCLE('',#265558,0.5); +#265558 = AXIS2_PLACEMENT_3D('',#265559,#265560,#265561); +#265559 = CARTESIAN_POINT('',(130.49165,-129.5831,1.51)); +#265560 = DIRECTION('',(-0.,0.,-1.)); +#265561 = DIRECTION('',(-0.,-1.,0.)); +#265562 = FACE_BOUND('',#265563,.T.); +#265563 = EDGE_LOOP('',(#265564)); +#265564 = ORIENTED_EDGE('',*,*,#265565,.T.); +#265565 = EDGE_CURVE('',#265566,#265566,#265568,.T.); +#265566 = VERTEX_POINT('',#265567); +#265567 = CARTESIAN_POINT('',(133.03165,-130.0831,1.51)); +#265568 = CIRCLE('',#265569,0.5); +#265569 = AXIS2_PLACEMENT_3D('',#265570,#265571,#265572); +#265570 = CARTESIAN_POINT('',(133.03165,-129.5831,1.51)); +#265571 = DIRECTION('',(-0.,0.,-1.)); +#265572 = DIRECTION('',(-0.,-1.,0.)); +#265573 = FACE_BOUND('',#265574,.T.); +#265574 = EDGE_LOOP('',(#265575)); +#265575 = ORIENTED_EDGE('',*,*,#265576,.T.); +#265576 = EDGE_CURVE('',#265577,#265577,#265579,.T.); +#265577 = VERTEX_POINT('',#265578); +#265578 = CARTESIAN_POINT('',(138.11165,-130.0831,1.51)); +#265579 = CIRCLE('',#265580,0.5); +#265580 = AXIS2_PLACEMENT_3D('',#265581,#265582,#265583); +#265581 = CARTESIAN_POINT('',(138.11165,-129.5831,1.51)); +#265582 = DIRECTION('',(-0.,0.,-1.)); +#265583 = DIRECTION('',(-0.,-1.,0.)); +#265584 = FACE_BOUND('',#265585,.T.); +#265585 = EDGE_LOOP('',(#265586)); +#265586 = ORIENTED_EDGE('',*,*,#265587,.T.); +#265587 = EDGE_CURVE('',#265588,#265588,#265590,.T.); +#265588 = VERTEX_POINT('',#265589); +#265589 = CARTESIAN_POINT('',(140.65165,-130.0831,1.51)); +#265590 = CIRCLE('',#265591,0.5); +#265591 = AXIS2_PLACEMENT_3D('',#265592,#265593,#265594); +#265592 = CARTESIAN_POINT('',(140.65165,-129.5831,1.51)); +#265593 = DIRECTION('',(-0.,0.,-1.)); +#265594 = DIRECTION('',(-0.,-1.,0.)); +#265595 = FACE_BOUND('',#265596,.T.); +#265596 = EDGE_LOOP('',(#265597)); +#265597 = ORIENTED_EDGE('',*,*,#265598,.T.); +#265598 = EDGE_CURVE('',#265599,#265599,#265601,.T.); +#265599 = VERTEX_POINT('',#265600); +#265600 = CARTESIAN_POINT('',(143.19165,-130.0831,1.51)); +#265601 = CIRCLE('',#265602,0.5); +#265602 = AXIS2_PLACEMENT_3D('',#265603,#265604,#265605); +#265603 = CARTESIAN_POINT('',(143.19165,-129.5831,1.51)); +#265604 = DIRECTION('',(-0.,0.,-1.)); +#265605 = DIRECTION('',(-0.,-1.,0.)); +#265606 = FACE_BOUND('',#265607,.T.); +#265607 = EDGE_LOOP('',(#265608)); +#265608 = ORIENTED_EDGE('',*,*,#265609,.T.); +#265609 = EDGE_CURVE('',#265610,#265610,#265612,.T.); +#265610 = VERTEX_POINT('',#265611); +#265611 = CARTESIAN_POINT('',(145.73165,-130.0831,1.51)); +#265612 = CIRCLE('',#265613,0.5); +#265613 = AXIS2_PLACEMENT_3D('',#265614,#265615,#265616); +#265614 = CARTESIAN_POINT('',(145.73165,-129.5831,1.51)); +#265615 = DIRECTION('',(-0.,0.,-1.)); +#265616 = DIRECTION('',(-0.,-1.,0.)); +#265617 = FACE_BOUND('',#265618,.T.); +#265618 = EDGE_LOOP('',(#265619,#265630,#265638,#265647)); +#265619 = ORIENTED_EDGE('',*,*,#265620,.T.); +#265620 = EDGE_CURVE('',#265621,#265623,#265625,.T.); +#265621 = VERTEX_POINT('',#265622); +#265622 = CARTESIAN_POINT('',(160.125,-134.185,1.51)); +#265623 = VERTEX_POINT('',#265624); +#265624 = CARTESIAN_POINT('',(159.525,-134.185,1.51)); +#265625 = CIRCLE('',#265626,0.3); +#265626 = AXIS2_PLACEMENT_3D('',#265627,#265628,#265629); +#265627 = CARTESIAN_POINT('',(159.825,-134.185,1.51)); +#265628 = DIRECTION('',(-0.,0.,-1.)); +#265629 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#265630 = ORIENTED_EDGE('',*,*,#265631,.T.); +#265631 = EDGE_CURVE('',#265623,#265632,#265634,.T.); +#265632 = VERTEX_POINT('',#265633); +#265633 = CARTESIAN_POINT('',(159.525,-133.385,1.51)); +#265634 = LINE('',#265635,#265636); +#265635 = CARTESIAN_POINT('',(159.525,-66.6925,1.51)); +#265636 = VECTOR('',#265637,1.); +#265637 = DIRECTION('',(-0.,1.,0.)); +#265638 = ORIENTED_EDGE('',*,*,#265639,.T.); +#265639 = EDGE_CURVE('',#265632,#265640,#265642,.T.); +#265640 = VERTEX_POINT('',#265641); +#265641 = CARTESIAN_POINT('',(160.125,-133.385,1.51)); +#265642 = CIRCLE('',#265643,0.3); +#265643 = AXIS2_PLACEMENT_3D('',#265644,#265645,#265646); +#265644 = CARTESIAN_POINT('',(159.825,-133.385,1.51)); +#265645 = DIRECTION('',(0.,-0.,-1.)); +#265646 = DIRECTION('',(1.,9.473903143469E-14,-0.)); +#265647 = ORIENTED_EDGE('',*,*,#265648,.T.); +#265648 = EDGE_CURVE('',#265640,#265621,#265649,.T.); +#265649 = LINE('',#265650,#265651); +#265650 = CARTESIAN_POINT('',(160.125,-67.0925,1.51)); +#265651 = VECTOR('',#265652,1.); +#265652 = DIRECTION('',(0.,-1.,0.)); +#265653 = FACE_BOUND('',#265654,.T.); +#265654 = EDGE_LOOP('',(#265655)); +#265655 = ORIENTED_EDGE('',*,*,#265656,.T.); +#265656 = EDGE_CURVE('',#265657,#265657,#265659,.T.); +#265657 = VERTEX_POINT('',#265658); +#265658 = CARTESIAN_POINT('',(148.27165,-130.0831,1.51)); +#265659 = CIRCLE('',#265660,0.5); +#265660 = AXIS2_PLACEMENT_3D('',#265661,#265662,#265663); +#265661 = CARTESIAN_POINT('',(148.27165,-129.5831,1.51)); +#265662 = DIRECTION('',(-0.,0.,-1.)); +#265663 = DIRECTION('',(-0.,-1.,0.)); +#265664 = FACE_BOUND('',#265665,.T.); +#265665 = EDGE_LOOP('',(#265666)); +#265666 = ORIENTED_EDGE('',*,*,#265667,.T.); +#265667 = EDGE_CURVE('',#265668,#265668,#265670,.T.); +#265668 = VERTEX_POINT('',#265669); +#265669 = CARTESIAN_POINT('',(150.81165,-130.0831,1.51)); +#265670 = CIRCLE('',#265671,0.5); +#265671 = AXIS2_PLACEMENT_3D('',#265672,#265673,#265674); +#265672 = CARTESIAN_POINT('',(150.81165,-129.5831,1.51)); +#265673 = DIRECTION('',(-0.,0.,-1.)); +#265674 = DIRECTION('',(-0.,-1.,0.)); +#265675 = FACE_BOUND('',#265676,.T.); +#265676 = EDGE_LOOP('',(#265677,#265688,#265696,#265705)); +#265677 = ORIENTED_EDGE('',*,*,#265678,.T.); +#265678 = EDGE_CURVE('',#265679,#265681,#265683,.T.); +#265679 = VERTEX_POINT('',#265680); +#265680 = CARTESIAN_POINT('',(160.125,-131.155,1.51)); +#265681 = VERTEX_POINT('',#265682); +#265682 = CARTESIAN_POINT('',(159.525,-131.155,1.51)); +#265683 = CIRCLE('',#265684,0.3); +#265684 = AXIS2_PLACEMENT_3D('',#265685,#265686,#265687); +#265685 = CARTESIAN_POINT('',(159.825,-131.155,1.51)); +#265686 = DIRECTION('',(-0.,0.,-1.)); +#265687 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#265688 = ORIENTED_EDGE('',*,*,#265689,.T.); +#265689 = EDGE_CURVE('',#265681,#265690,#265692,.T.); +#265690 = VERTEX_POINT('',#265691); +#265691 = CARTESIAN_POINT('',(159.525,-129.655,1.51)); +#265692 = LINE('',#265693,#265694); +#265693 = CARTESIAN_POINT('',(159.525,-64.8275,1.51)); +#265694 = VECTOR('',#265695,1.); +#265695 = DIRECTION('',(-0.,1.,0.)); +#265696 = ORIENTED_EDGE('',*,*,#265697,.T.); +#265697 = EDGE_CURVE('',#265690,#265698,#265700,.T.); +#265698 = VERTEX_POINT('',#265699); +#265699 = CARTESIAN_POINT('',(160.125,-129.655,1.51)); +#265700 = CIRCLE('',#265701,0.3); +#265701 = AXIS2_PLACEMENT_3D('',#265702,#265703,#265704); +#265702 = CARTESIAN_POINT('',(159.825,-129.655,1.51)); +#265703 = DIRECTION('',(0.,-0.,-1.)); +#265704 = DIRECTION('',(1.,-9.473903143469E-14,0.)); +#265705 = ORIENTED_EDGE('',*,*,#265706,.T.); +#265706 = EDGE_CURVE('',#265698,#265679,#265707,.T.); +#265707 = LINE('',#265708,#265709); +#265708 = CARTESIAN_POINT('',(160.125,-65.5775,1.51)); +#265709 = VECTOR('',#265710,1.); +#265710 = DIRECTION('',(0.,-1.,0.)); +#265711 = FACE_BOUND('',#265712,.T.); +#265712 = EDGE_LOOP('',(#265713)); +#265713 = ORIENTED_EDGE('',*,*,#265714,.T.); +#265714 = EDGE_CURVE('',#265715,#265715,#265717,.T.); +#265715 = VERTEX_POINT('',#265716); +#265716 = CARTESIAN_POINT('',(161.175,-130.975,1.51)); +#265717 = CIRCLE('',#265718,0.2); +#265718 = AXIS2_PLACEMENT_3D('',#265719,#265720,#265721); +#265719 = CARTESIAN_POINT('',(161.175,-130.775,1.51)); +#265720 = DIRECTION('',(-0.,0.,-1.)); +#265721 = DIRECTION('',(-0.,-1.,0.)); +#265722 = FACE_BOUND('',#265723,.T.); +#265723 = EDGE_LOOP('',(#265724)); +#265724 = ORIENTED_EDGE('',*,*,#265725,.T.); +#265725 = EDGE_CURVE('',#265726,#265726,#265728,.T.); +#265726 = VERTEX_POINT('',#265727); +#265727 = CARTESIAN_POINT('',(162.025,-130.975,1.51)); +#265728 = CIRCLE('',#265729,0.2); +#265729 = AXIS2_PLACEMENT_3D('',#265730,#265731,#265732); +#265730 = CARTESIAN_POINT('',(162.025,-130.775,1.51)); +#265731 = DIRECTION('',(-0.,0.,-1.)); +#265732 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265733 = FACE_BOUND('',#265734,.T.); +#265734 = EDGE_LOOP('',(#265735)); +#265735 = ORIENTED_EDGE('',*,*,#265736,.T.); +#265736 = EDGE_CURVE('',#265737,#265737,#265739,.T.); +#265737 = VERTEX_POINT('',#265738); +#265738 = CARTESIAN_POINT('',(162.875,-130.975,1.51)); +#265739 = CIRCLE('',#265740,0.2); +#265740 = AXIS2_PLACEMENT_3D('',#265741,#265742,#265743); +#265741 = CARTESIAN_POINT('',(162.875,-130.775,1.51)); +#265742 = DIRECTION('',(-0.,0.,-1.)); +#265743 = DIRECTION('',(-0.,-1.,0.)); +#265744 = FACE_BOUND('',#265745,.T.); +#265745 = EDGE_LOOP('',(#265746)); +#265746 = ORIENTED_EDGE('',*,*,#265747,.T.); +#265747 = EDGE_CURVE('',#265748,#265748,#265750,.T.); +#265748 = VERTEX_POINT('',#265749); +#265749 = CARTESIAN_POINT('',(163.725,-130.975,1.51)); +#265750 = CIRCLE('',#265751,0.2); +#265751 = AXIS2_PLACEMENT_3D('',#265752,#265753,#265754); +#265752 = CARTESIAN_POINT('',(163.725,-130.775,1.51)); +#265753 = DIRECTION('',(-0.,0.,-1.)); +#265754 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#265755 = FACE_BOUND('',#265756,.T.); +#265756 = EDGE_LOOP('',(#265757)); +#265757 = ORIENTED_EDGE('',*,*,#265758,.T.); +#265758 = EDGE_CURVE('',#265759,#265759,#265761,.T.); +#265759 = VERTEX_POINT('',#265760); +#265760 = CARTESIAN_POINT('',(161.175,-129.625,1.51)); +#265761 = CIRCLE('',#265762,0.2); +#265762 = AXIS2_PLACEMENT_3D('',#265763,#265764,#265765); +#265763 = CARTESIAN_POINT('',(161.175,-129.425,1.51)); +#265764 = DIRECTION('',(-0.,0.,-1.)); +#265765 = DIRECTION('',(-0.,-1.,0.)); +#265766 = FACE_BOUND('',#265767,.T.); +#265767 = EDGE_LOOP('',(#265768)); +#265768 = ORIENTED_EDGE('',*,*,#265769,.T.); +#265769 = EDGE_CURVE('',#265770,#265770,#265772,.T.); +#265770 = VERTEX_POINT('',#265771); +#265771 = CARTESIAN_POINT('',(162.025,-129.625,1.51)); +#265772 = CIRCLE('',#265773,0.2); +#265773 = AXIS2_PLACEMENT_3D('',#265774,#265775,#265776); +#265774 = CARTESIAN_POINT('',(162.025,-129.425,1.51)); +#265775 = DIRECTION('',(-0.,0.,-1.)); +#265776 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265777 = FACE_BOUND('',#265778,.T.); +#265778 = EDGE_LOOP('',(#265779)); +#265779 = ORIENTED_EDGE('',*,*,#265780,.T.); +#265780 = EDGE_CURVE('',#265781,#265781,#265783,.T.); +#265781 = VERTEX_POINT('',#265782); +#265782 = CARTESIAN_POINT('',(162.875,-129.625,1.51)); +#265783 = CIRCLE('',#265784,0.2); +#265784 = AXIS2_PLACEMENT_3D('',#265785,#265786,#265787); +#265785 = CARTESIAN_POINT('',(162.875,-129.425,1.51)); +#265786 = DIRECTION('',(-0.,0.,-1.)); +#265787 = DIRECTION('',(-0.,-1.,0.)); +#265788 = FACE_BOUND('',#265789,.T.); +#265789 = EDGE_LOOP('',(#265790)); +#265790 = ORIENTED_EDGE('',*,*,#265791,.T.); +#265791 = EDGE_CURVE('',#265792,#265792,#265794,.T.); +#265792 = VERTEX_POINT('',#265793); +#265793 = CARTESIAN_POINT('',(163.725,-129.625,1.51)); +#265794 = CIRCLE('',#265795,0.2); +#265795 = AXIS2_PLACEMENT_3D('',#265796,#265797,#265798); +#265796 = CARTESIAN_POINT('',(163.725,-129.425,1.51)); +#265797 = DIRECTION('',(-0.,0.,-1.)); +#265798 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#265799 = FACE_BOUND('',#265800,.T.); +#265800 = EDGE_LOOP('',(#265801,#265812,#265820,#265829)); +#265801 = ORIENTED_EDGE('',*,*,#265802,.T.); +#265802 = EDGE_CURVE('',#265803,#265805,#265807,.T.); +#265803 = VERTEX_POINT('',#265804); +#265804 = CARTESIAN_POINT('',(168.775,-134.185,1.51)); +#265805 = VERTEX_POINT('',#265806); +#265806 = CARTESIAN_POINT('',(168.175,-134.185,1.51)); +#265807 = CIRCLE('',#265808,0.3); +#265808 = AXIS2_PLACEMENT_3D('',#265809,#265810,#265811); +#265809 = CARTESIAN_POINT('',(168.475,-134.185,1.51)); +#265810 = DIRECTION('',(-0.,0.,-1.)); +#265811 = DIRECTION('',(-1.,0.,0.)); +#265812 = ORIENTED_EDGE('',*,*,#265813,.T.); +#265813 = EDGE_CURVE('',#265805,#265814,#265816,.T.); +#265814 = VERTEX_POINT('',#265815); +#265815 = CARTESIAN_POINT('',(168.175,-133.385,1.51)); +#265816 = LINE('',#265817,#265818); +#265817 = CARTESIAN_POINT('',(168.175,-66.6925,1.51)); +#265818 = VECTOR('',#265819,1.); +#265819 = DIRECTION('',(-0.,1.,0.)); +#265820 = ORIENTED_EDGE('',*,*,#265821,.T.); +#265821 = EDGE_CURVE('',#265814,#265822,#265824,.T.); +#265822 = VERTEX_POINT('',#265823); +#265823 = CARTESIAN_POINT('',(168.775,-133.385,1.51)); +#265824 = CIRCLE('',#265825,0.3); +#265825 = AXIS2_PLACEMENT_3D('',#265826,#265827,#265828); +#265826 = CARTESIAN_POINT('',(168.475,-133.385,1.51)); +#265827 = DIRECTION('',(0.,-0.,-1.)); +#265828 = DIRECTION('',(1.,9.473903143468E-14,-0.)); +#265829 = ORIENTED_EDGE('',*,*,#265830,.T.); +#265830 = EDGE_CURVE('',#265822,#265803,#265831,.T.); +#265831 = LINE('',#265832,#265833); +#265832 = CARTESIAN_POINT('',(168.775,-67.0925,1.51)); +#265833 = VECTOR('',#265834,1.); +#265834 = DIRECTION('',(0.,-1.,0.)); +#265835 = FACE_BOUND('',#265836,.T.); +#265836 = EDGE_LOOP('',(#265837)); +#265837 = ORIENTED_EDGE('',*,*,#265838,.T.); +#265838 = EDGE_CURVE('',#265839,#265839,#265841,.T.); +#265839 = VERTEX_POINT('',#265840); +#265840 = CARTESIAN_POINT('',(172.69165,-134.4731,1.51)); +#265841 = CIRCLE('',#265842,0.65); +#265842 = AXIS2_PLACEMENT_3D('',#265843,#265844,#265845); +#265843 = CARTESIAN_POINT('',(172.69165,-133.8231,1.51)); +#265844 = DIRECTION('',(-0.,0.,-1.)); +#265845 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#265846 = FACE_BOUND('',#265847,.T.); +#265847 = EDGE_LOOP('',(#265848)); +#265848 = ORIENTED_EDGE('',*,*,#265849,.T.); +#265849 = EDGE_CURVE('',#265850,#265850,#265852,.T.); +#265850 = VERTEX_POINT('',#265851); +#265851 = CARTESIAN_POINT('',(177.69165,-134.4731,1.51)); +#265852 = CIRCLE('',#265853,0.65); +#265853 = AXIS2_PLACEMENT_3D('',#265854,#265855,#265856); +#265854 = CARTESIAN_POINT('',(177.69165,-133.8231,1.51)); +#265855 = DIRECTION('',(-0.,0.,-1.)); +#265856 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#265857 = FACE_BOUND('',#265858,.T.); +#265858 = EDGE_LOOP('',(#265859)); +#265859 = ORIENTED_EDGE('',*,*,#265860,.T.); +#265860 = EDGE_CURVE('',#265861,#265861,#265863,.T.); +#265861 = VERTEX_POINT('',#265862); +#265862 = CARTESIAN_POINT('',(164.575,-130.975,1.51)); +#265863 = CIRCLE('',#265864,0.2); +#265864 = AXIS2_PLACEMENT_3D('',#265865,#265866,#265867); +#265865 = CARTESIAN_POINT('',(164.575,-130.775,1.51)); +#265866 = DIRECTION('',(-0.,0.,-1.)); +#265867 = DIRECTION('',(-0.,-1.,0.)); +#265868 = FACE_BOUND('',#265869,.T.); +#265869 = EDGE_LOOP('',(#265870)); +#265870 = ORIENTED_EDGE('',*,*,#265871,.T.); +#265871 = EDGE_CURVE('',#265872,#265872,#265874,.T.); +#265872 = VERTEX_POINT('',#265873); +#265873 = CARTESIAN_POINT('',(165.425,-130.975,1.51)); +#265874 = CIRCLE('',#265875,0.2); +#265875 = AXIS2_PLACEMENT_3D('',#265876,#265877,#265878); +#265876 = CARTESIAN_POINT('',(165.425,-130.775,1.51)); +#265877 = DIRECTION('',(-0.,0.,-1.)); +#265878 = DIRECTION('',(-0.,-1.,0.)); +#265879 = FACE_BOUND('',#265880,.T.); +#265880 = EDGE_LOOP('',(#265881)); +#265881 = ORIENTED_EDGE('',*,*,#265882,.T.); +#265882 = EDGE_CURVE('',#265883,#265883,#265885,.T.); +#265883 = VERTEX_POINT('',#265884); +#265884 = CARTESIAN_POINT('',(166.275,-130.975,1.51)); +#265885 = CIRCLE('',#265886,0.2); +#265886 = AXIS2_PLACEMENT_3D('',#265887,#265888,#265889); +#265887 = CARTESIAN_POINT('',(166.275,-130.775,1.51)); +#265888 = DIRECTION('',(-0.,0.,-1.)); +#265889 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265890 = FACE_BOUND('',#265891,.T.); +#265891 = EDGE_LOOP('',(#265892)); +#265892 = ORIENTED_EDGE('',*,*,#265893,.T.); +#265893 = EDGE_CURVE('',#265894,#265894,#265896,.T.); +#265894 = VERTEX_POINT('',#265895); +#265895 = CARTESIAN_POINT('',(167.125,-130.975,1.51)); +#265896 = CIRCLE('',#265897,0.2); +#265897 = AXIS2_PLACEMENT_3D('',#265898,#265899,#265900); +#265898 = CARTESIAN_POINT('',(167.125,-130.775,1.51)); +#265899 = DIRECTION('',(-0.,0.,-1.)); +#265900 = DIRECTION('',(-0.,-1.,0.)); +#265901 = FACE_BOUND('',#265902,.T.); +#265902 = EDGE_LOOP('',(#265903,#265914,#265922,#265931)); +#265903 = ORIENTED_EDGE('',*,*,#265904,.T.); +#265904 = EDGE_CURVE('',#265905,#265907,#265909,.T.); +#265905 = VERTEX_POINT('',#265906); +#265906 = CARTESIAN_POINT('',(168.775,-131.155,1.51)); +#265907 = VERTEX_POINT('',#265908); +#265908 = CARTESIAN_POINT('',(168.175,-131.155,1.51)); +#265909 = CIRCLE('',#265910,0.3); +#265910 = AXIS2_PLACEMENT_3D('',#265911,#265912,#265913); +#265911 = CARTESIAN_POINT('',(168.475,-131.155,1.51)); +#265912 = DIRECTION('',(-0.,0.,-1.)); +#265913 = DIRECTION('',(-1.,0.,0.)); +#265914 = ORIENTED_EDGE('',*,*,#265915,.T.); +#265915 = EDGE_CURVE('',#265907,#265916,#265918,.T.); +#265916 = VERTEX_POINT('',#265917); +#265917 = CARTESIAN_POINT('',(168.175,-129.655,1.51)); +#265918 = LINE('',#265919,#265920); +#265919 = CARTESIAN_POINT('',(168.175,-64.8275,1.51)); +#265920 = VECTOR('',#265921,1.); +#265921 = DIRECTION('',(-0.,1.,0.)); +#265922 = ORIENTED_EDGE('',*,*,#265923,.T.); +#265923 = EDGE_CURVE('',#265916,#265924,#265926,.T.); +#265924 = VERTEX_POINT('',#265925); +#265925 = CARTESIAN_POINT('',(168.775,-129.655,1.51)); +#265926 = CIRCLE('',#265927,0.3); +#265927 = AXIS2_PLACEMENT_3D('',#265928,#265929,#265930); +#265928 = CARTESIAN_POINT('',(168.475,-129.655,1.51)); +#265929 = DIRECTION('',(0.,-0.,-1.)); +#265930 = DIRECTION('',(1.,0.,-0.)); +#265931 = ORIENTED_EDGE('',*,*,#265932,.T.); +#265932 = EDGE_CURVE('',#265924,#265905,#265933,.T.); +#265933 = LINE('',#265934,#265935); +#265934 = CARTESIAN_POINT('',(168.775,-65.5775,1.51)); +#265935 = VECTOR('',#265936,1.); +#265936 = DIRECTION('',(0.,-1.,0.)); +#265937 = FACE_BOUND('',#265938,.T.); +#265938 = EDGE_LOOP('',(#265939)); +#265939 = ORIENTED_EDGE('',*,*,#265940,.T.); +#265940 = EDGE_CURVE('',#265941,#265941,#265943,.T.); +#265941 = VERTEX_POINT('',#265942); +#265942 = CARTESIAN_POINT('',(164.575,-129.625,1.51)); +#265943 = CIRCLE('',#265944,0.2); +#265944 = AXIS2_PLACEMENT_3D('',#265945,#265946,#265947); +#265945 = CARTESIAN_POINT('',(164.575,-129.425,1.51)); +#265946 = DIRECTION('',(-0.,0.,-1.)); +#265947 = DIRECTION('',(-0.,-1.,0.)); +#265948 = FACE_BOUND('',#265949,.T.); +#265949 = EDGE_LOOP('',(#265950)); +#265950 = ORIENTED_EDGE('',*,*,#265951,.T.); +#265951 = EDGE_CURVE('',#265952,#265952,#265954,.T.); +#265952 = VERTEX_POINT('',#265953); +#265953 = CARTESIAN_POINT('',(165.425,-129.625,1.51)); +#265954 = CIRCLE('',#265955,0.2); +#265955 = AXIS2_PLACEMENT_3D('',#265956,#265957,#265958); +#265956 = CARTESIAN_POINT('',(165.425,-129.425,1.51)); +#265957 = DIRECTION('',(-0.,0.,-1.)); +#265958 = DIRECTION('',(-0.,-1.,0.)); +#265959 = FACE_BOUND('',#265960,.T.); +#265960 = EDGE_LOOP('',(#265961)); +#265961 = ORIENTED_EDGE('',*,*,#265962,.T.); +#265962 = EDGE_CURVE('',#265963,#265963,#265965,.T.); +#265963 = VERTEX_POINT('',#265964); +#265964 = CARTESIAN_POINT('',(166.275,-129.625,1.51)); +#265965 = CIRCLE('',#265966,0.2); +#265966 = AXIS2_PLACEMENT_3D('',#265967,#265968,#265969); +#265967 = CARTESIAN_POINT('',(166.275,-129.425,1.51)); +#265968 = DIRECTION('',(-0.,0.,-1.)); +#265969 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265970 = FACE_BOUND('',#265971,.T.); +#265971 = EDGE_LOOP('',(#265972)); +#265972 = ORIENTED_EDGE('',*,*,#265973,.T.); +#265973 = EDGE_CURVE('',#265974,#265974,#265976,.T.); +#265974 = VERTEX_POINT('',#265975); +#265975 = CARTESIAN_POINT('',(167.125,-129.625,1.51)); +#265976 = CIRCLE('',#265977,0.2); +#265977 = AXIS2_PLACEMENT_3D('',#265978,#265979,#265980); +#265978 = CARTESIAN_POINT('',(167.125,-129.425,1.51)); +#265979 = DIRECTION('',(-0.,0.,-1.)); +#265980 = DIRECTION('',(-0.,-1.,0.)); +#265981 = FACE_BOUND('',#265982,.T.); +#265982 = EDGE_LOOP('',(#265983)); +#265983 = ORIENTED_EDGE('',*,*,#265984,.T.); +#265984 = EDGE_CURVE('',#265985,#265985,#265987,.T.); +#265985 = VERTEX_POINT('',#265986); +#265986 = CARTESIAN_POINT('',(182.69165,-134.4731,1.51)); +#265987 = CIRCLE('',#265988,0.65); +#265988 = AXIS2_PLACEMENT_3D('',#265989,#265990,#265991); +#265989 = CARTESIAN_POINT('',(182.69165,-133.8231,1.51)); +#265990 = DIRECTION('',(-0.,0.,-1.)); +#265991 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#265992 = FACE_BOUND('',#265993,.T.); +#265993 = EDGE_LOOP('',(#265994)); +#265994 = ORIENTED_EDGE('',*,*,#265995,.T.); +#265995 = EDGE_CURVE('',#265996,#265996,#265998,.T.); +#265996 = VERTEX_POINT('',#265997); +#265997 = CARTESIAN_POINT('',(187.69165,-134.4731,1.51)); +#265998 = CIRCLE('',#265999,0.65); +#265999 = AXIS2_PLACEMENT_3D('',#266000,#266001,#266002); +#266000 = CARTESIAN_POINT('',(187.69165,-133.8231,1.51)); +#266001 = DIRECTION('',(-0.,0.,-1.)); +#266002 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#266003 = FACE_BOUND('',#266004,.T.); +#266004 = EDGE_LOOP('',(#266005)); +#266005 = ORIENTED_EDGE('',*,*,#266006,.T.); +#266006 = EDGE_CURVE('',#266007,#266007,#266009,.T.); +#266007 = VERTEX_POINT('',#266008); +#266008 = CARTESIAN_POINT('',(192.69165,-134.4731,1.51)); +#266009 = CIRCLE('',#266010,0.65); +#266010 = AXIS2_PLACEMENT_3D('',#266011,#266012,#266013); +#266011 = CARTESIAN_POINT('',(192.69165,-133.8231,1.51)); +#266012 = DIRECTION('',(-0.,0.,-1.)); +#266013 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#266014 = FACE_BOUND('',#266015,.T.); +#266015 = EDGE_LOOP('',(#266016)); +#266016 = ORIENTED_EDGE('',*,*,#266017,.T.); +#266017 = EDGE_CURVE('',#266018,#266018,#266020,.T.); +#266018 = VERTEX_POINT('',#266019); +#266019 = CARTESIAN_POINT('',(199.19165,-138.3731,1.51)); +#266020 = CIRCLE('',#266021,0.55); +#266021 = AXIS2_PLACEMENT_3D('',#266022,#266023,#266024); +#266022 = CARTESIAN_POINT('',(199.19165,-137.8231,1.51)); +#266023 = DIRECTION('',(-0.,0.,-1.)); +#266024 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266025 = FACE_BOUND('',#266026,.T.); +#266026 = EDGE_LOOP('',(#266027)); +#266027 = ORIENTED_EDGE('',*,*,#266028,.T.); +#266028 = EDGE_CURVE('',#266029,#266029,#266031,.T.); +#266029 = VERTEX_POINT('',#266030); +#266030 = CARTESIAN_POINT('',(199.19165,-133.8731,1.51)); +#266031 = CIRCLE('',#266032,0.55); +#266032 = AXIS2_PLACEMENT_3D('',#266033,#266034,#266035); +#266033 = CARTESIAN_POINT('',(199.19165,-133.3231,1.51)); +#266034 = DIRECTION('',(-0.,0.,-1.)); +#266035 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266036 = FACE_BOUND('',#266037,.T.); +#266037 = EDGE_LOOP('',(#266038)); +#266038 = ORIENTED_EDGE('',*,*,#266039,.T.); +#266039 = EDGE_CURVE('',#266040,#266040,#266042,.T.); +#266040 = VERTEX_POINT('',#266041); +#266041 = CARTESIAN_POINT('',(205.69165,-138.3731,1.51)); +#266042 = CIRCLE('',#266043,0.55); +#266043 = AXIS2_PLACEMENT_3D('',#266044,#266045,#266046); +#266044 = CARTESIAN_POINT('',(205.69165,-137.8231,1.51)); +#266045 = DIRECTION('',(-0.,0.,-1.)); +#266046 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266047 = FACE_BOUND('',#266048,.T.); +#266048 = EDGE_LOOP('',(#266049)); +#266049 = ORIENTED_EDGE('',*,*,#266050,.T.); +#266050 = EDGE_CURVE('',#266051,#266051,#266053,.T.); +#266051 = VERTEX_POINT('',#266052); +#266052 = CARTESIAN_POINT('',(205.69165,-133.8731,1.51)); +#266053 = CIRCLE('',#266054,0.55); +#266054 = AXIS2_PLACEMENT_3D('',#266055,#266056,#266057); +#266055 = CARTESIAN_POINT('',(205.69165,-133.3231,1.51)); +#266056 = DIRECTION('',(-0.,0.,-1.)); +#266057 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266058 = FACE_BOUND('',#266059,.T.); +#266059 = EDGE_LOOP('',(#266060)); +#266060 = ORIENTED_EDGE('',*,*,#266061,.T.); +#266061 = EDGE_CURVE('',#266062,#266062,#266064,.T.); +#266062 = VERTEX_POINT('',#266063); +#266063 = CARTESIAN_POINT('',(211.19165,-136.9231,1.51)); +#266064 = CIRCLE('',#266065,1.6); +#266065 = AXIS2_PLACEMENT_3D('',#266066,#266067,#266068); +#266066 = CARTESIAN_POINT('',(211.19165,-135.3231,1.51)); +#266067 = DIRECTION('',(-0.,0.,-1.)); +#266068 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#266069 = FACE_BOUND('',#266070,.T.); +#266070 = EDGE_LOOP('',(#266071)); +#266071 = ORIENTED_EDGE('',*,*,#266072,.T.); +#266072 = EDGE_CURVE('',#266073,#266073,#266075,.T.); +#266073 = VERTEX_POINT('',#266074); +#266074 = CARTESIAN_POINT('',(210.19165,-121.8231,1.51)); +#266075 = CIRCLE('',#266076,0.5); +#266076 = AXIS2_PLACEMENT_3D('',#266077,#266078,#266079); +#266077 = CARTESIAN_POINT('',(210.19165,-121.3231,1.51)); +#266078 = DIRECTION('',(-0.,0.,-1.)); +#266079 = DIRECTION('',(-0.,-1.,0.)); +#266080 = FACE_BOUND('',#266081,.T.); +#266081 = EDGE_LOOP('',(#266082)); +#266082 = ORIENTED_EDGE('',*,*,#266083,.T.); +#266083 = EDGE_CURVE('',#266084,#266084,#266086,.T.); +#266084 = VERTEX_POINT('',#266085); +#266085 = CARTESIAN_POINT('',(210.19165,-119.3231,1.51)); +#266086 = CIRCLE('',#266087,0.5); +#266087 = AXIS2_PLACEMENT_3D('',#266088,#266089,#266090); +#266088 = CARTESIAN_POINT('',(210.19165,-118.8231,1.51)); +#266089 = DIRECTION('',(-0.,0.,-1.)); +#266090 = DIRECTION('',(-0.,-1.,0.)); +#266091 = FACE_BOUND('',#266092,.T.); +#266092 = EDGE_LOOP('',(#266093)); +#266093 = ORIENTED_EDGE('',*,*,#266094,.T.); +#266094 = EDGE_CURVE('',#266095,#266095,#266097,.T.); +#266095 = VERTEX_POINT('',#266096); +#266096 = CARTESIAN_POINT('',(174.19165,-93.2231,1.51)); +#266097 = CIRCLE('',#266098,0.4); +#266098 = AXIS2_PLACEMENT_3D('',#266099,#266100,#266101); +#266099 = CARTESIAN_POINT('',(174.19165,-92.8231,1.51)); +#266100 = DIRECTION('',(-0.,0.,-1.)); +#266101 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266102 = FACE_BOUND('',#266103,.T.); +#266103 = EDGE_LOOP('',(#266104)); +#266104 = ORIENTED_EDGE('',*,*,#266105,.T.); +#266105 = EDGE_CURVE('',#266106,#266106,#266108,.T.); +#266106 = VERTEX_POINT('',#266107); +#266107 = CARTESIAN_POINT('',(210.19165,-108.7981,1.51)); +#266108 = CIRCLE('',#266109,0.475); +#266109 = AXIS2_PLACEMENT_3D('',#266110,#266111,#266112); +#266110 = CARTESIAN_POINT('',(210.19165,-108.3231,1.51)); +#266111 = DIRECTION('',(-0.,0.,-1.)); +#266112 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266113 = FACE_BOUND('',#266114,.T.); +#266114 = EDGE_LOOP('',(#266115)); +#266115 = ORIENTED_EDGE('',*,*,#266116,.T.); +#266116 = EDGE_CURVE('',#266117,#266117,#266119,.T.); +#266117 = VERTEX_POINT('',#266118); +#266118 = CARTESIAN_POINT('',(210.19165,-106.2981,1.51)); +#266119 = CIRCLE('',#266120,0.475); +#266120 = AXIS2_PLACEMENT_3D('',#266121,#266122,#266123); +#266121 = CARTESIAN_POINT('',(210.19165,-105.8231,1.51)); +#266122 = DIRECTION('',(-0.,0.,-1.)); +#266123 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266124 = FACE_BOUND('',#266125,.T.); +#266125 = EDGE_LOOP('',(#266126)); +#266126 = ORIENTED_EDGE('',*,*,#266127,.T.); +#266127 = EDGE_CURVE('',#266128,#266128,#266130,.T.); +#266128 = VERTEX_POINT('',#266129); +#266129 = CARTESIAN_POINT('',(210.19165,-103.7981,1.51)); +#266130 = CIRCLE('',#266131,0.475); +#266131 = AXIS2_PLACEMENT_3D('',#266132,#266133,#266134); +#266132 = CARTESIAN_POINT('',(210.19165,-103.3231,1.51)); +#266133 = DIRECTION('',(-0.,0.,-1.)); +#266134 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266135 = FACE_BOUND('',#266136,.T.); +#266136 = EDGE_LOOP('',(#266137)); +#266137 = ORIENTED_EDGE('',*,*,#266138,.T.); +#266138 = EDGE_CURVE('',#266139,#266139,#266141,.T.); +#266139 = VERTEX_POINT('',#266140); +#266140 = CARTESIAN_POINT('',(196.54165,-93.2231,1.51)); +#266141 = CIRCLE('',#266142,0.4); +#266142 = AXIS2_PLACEMENT_3D('',#266143,#266144,#266145); +#266143 = CARTESIAN_POINT('',(196.54165,-92.8231,1.51)); +#266144 = DIRECTION('',(-0.,0.,-1.)); +#266145 = DIRECTION('',(-0.,-1.,0.)); +#266146 = FACE_BOUND('',#266147,.T.); +#266147 = EDGE_LOOP('',(#266148)); +#266148 = ORIENTED_EDGE('',*,*,#266149,.T.); +#266149 = EDGE_CURVE('',#266150,#266150,#266152,.T.); +#266150 = VERTEX_POINT('',#266151); +#266151 = CARTESIAN_POINT('',(210.19165,-95.7981,1.51)); +#266152 = CIRCLE('',#266153,0.475); +#266153 = AXIS2_PLACEMENT_3D('',#266154,#266155,#266156); +#266154 = CARTESIAN_POINT('',(210.19165,-95.3231,1.51)); +#266155 = DIRECTION('',(-0.,0.,-1.)); +#266156 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266157 = FACE_BOUND('',#266158,.T.); +#266158 = EDGE_LOOP('',(#266159)); +#266159 = ORIENTED_EDGE('',*,*,#266160,.T.); +#266160 = EDGE_CURVE('',#266161,#266161,#266163,.T.); +#266161 = VERTEX_POINT('',#266162); +#266162 = CARTESIAN_POINT('',(210.19165,-93.2981,1.51)); +#266163 = CIRCLE('',#266164,0.475); +#266164 = AXIS2_PLACEMENT_3D('',#266165,#266166,#266167); +#266165 = CARTESIAN_POINT('',(210.19165,-92.8231,1.51)); +#266166 = DIRECTION('',(-0.,0.,-1.)); +#266167 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266168 = FACE_BOUND('',#266169,.T.); +#266169 = EDGE_LOOP('',(#266170)); +#266170 = ORIENTED_EDGE('',*,*,#266171,.T.); +#266171 = EDGE_CURVE('',#266172,#266172,#266174,.T.); +#266172 = VERTEX_POINT('',#266173); +#266173 = CARTESIAN_POINT('',(106.11165,-81.8231,1.51)); +#266174 = CIRCLE('',#266175,0.5); +#266175 = AXIS2_PLACEMENT_3D('',#266176,#266177,#266178); +#266176 = CARTESIAN_POINT('',(106.11165,-81.3231,1.51)); +#266177 = DIRECTION('',(-0.,0.,-1.)); +#266178 = DIRECTION('',(-0.,-1.,0.)); +#266179 = FACE_BOUND('',#266180,.T.); +#266180 = EDGE_LOOP('',(#266181)); +#266181 = ORIENTED_EDGE('',*,*,#266182,.T.); +#266182 = EDGE_CURVE('',#266183,#266183,#266185,.T.); +#266183 = VERTEX_POINT('',#266184); +#266184 = CARTESIAN_POINT('',(108.65165,-81.8231,1.51)); +#266185 = CIRCLE('',#266186,0.5); +#266186 = AXIS2_PLACEMENT_3D('',#266187,#266188,#266189); +#266187 = CARTESIAN_POINT('',(108.65165,-81.3231,1.51)); +#266188 = DIRECTION('',(-0.,0.,-1.)); +#266189 = DIRECTION('',(-0.,-1.,0.)); +#266190 = FACE_BOUND('',#266191,.T.); +#266191 = EDGE_LOOP('',(#266192)); +#266192 = ORIENTED_EDGE('',*,*,#266193,.T.); +#266193 = EDGE_CURVE('',#266194,#266194,#266196,.T.); +#266194 = VERTEX_POINT('',#266195); +#266195 = CARTESIAN_POINT('',(111.19165,-81.8231,1.51)); +#266196 = CIRCLE('',#266197,0.5); +#266197 = AXIS2_PLACEMENT_3D('',#266198,#266199,#266200); +#266198 = CARTESIAN_POINT('',(111.19165,-81.3231,1.51)); +#266199 = DIRECTION('',(-0.,0.,-1.)); +#266200 = DIRECTION('',(-0.,-1.,0.)); +#266201 = FACE_BOUND('',#266202,.T.); +#266202 = EDGE_LOOP('',(#266203)); +#266203 = ORIENTED_EDGE('',*,*,#266204,.T.); +#266204 = EDGE_CURVE('',#266205,#266205,#266207,.T.); +#266205 = VERTEX_POINT('',#266206); +#266206 = CARTESIAN_POINT('',(113.73165,-81.8231,1.51)); +#266207 = CIRCLE('',#266208,0.5); +#266208 = AXIS2_PLACEMENT_3D('',#266209,#266210,#266211); +#266209 = CARTESIAN_POINT('',(113.73165,-81.3231,1.51)); +#266210 = DIRECTION('',(-0.,0.,-1.)); +#266211 = DIRECTION('',(-0.,-1.,0.)); +#266212 = FACE_BOUND('',#266213,.T.); +#266213 = EDGE_LOOP('',(#266214)); +#266214 = ORIENTED_EDGE('',*,*,#266215,.T.); +#266215 = EDGE_CURVE('',#266216,#266216,#266218,.T.); +#266216 = VERTEX_POINT('',#266217); +#266217 = CARTESIAN_POINT('',(107.19165,-74.6031,1.51)); +#266218 = CIRCLE('',#266219,0.5); +#266219 = AXIS2_PLACEMENT_3D('',#266220,#266221,#266222); +#266220 = CARTESIAN_POINT('',(107.19165,-74.1031,1.51)); +#266221 = DIRECTION('',(-0.,0.,-1.)); +#266222 = DIRECTION('',(-0.,-1.,0.)); +#266223 = FACE_BOUND('',#266224,.T.); +#266224 = EDGE_LOOP('',(#266225)); +#266225 = ORIENTED_EDGE('',*,*,#266226,.T.); +#266226 = EDGE_CURVE('',#266227,#266227,#266229,.T.); +#266227 = VERTEX_POINT('',#266228); +#266228 = CARTESIAN_POINT('',(109.73165,-74.6031,1.51)); +#266229 = CIRCLE('',#266230,0.5); +#266230 = AXIS2_PLACEMENT_3D('',#266231,#266232,#266233); +#266231 = CARTESIAN_POINT('',(109.73165,-74.1031,1.51)); +#266232 = DIRECTION('',(-0.,0.,-1.)); +#266233 = DIRECTION('',(-0.,-1.,0.)); +#266234 = FACE_BOUND('',#266235,.T.); +#266235 = EDGE_LOOP('',(#266236)); +#266236 = ORIENTED_EDGE('',*,*,#266237,.T.); +#266237 = EDGE_CURVE('',#266238,#266238,#266240,.T.); +#266238 = VERTEX_POINT('',#266239); +#266239 = CARTESIAN_POINT('',(112.27165,-74.6031,1.51)); +#266240 = CIRCLE('',#266241,0.5); +#266241 = AXIS2_PLACEMENT_3D('',#266242,#266243,#266244); +#266242 = CARTESIAN_POINT('',(112.27165,-74.1031,1.51)); +#266243 = DIRECTION('',(-0.,0.,-1.)); +#266244 = DIRECTION('',(-0.,-1.,0.)); +#266245 = FACE_BOUND('',#266246,.T.); +#266246 = EDGE_LOOP('',(#266247)); +#266247 = ORIENTED_EDGE('',*,*,#266248,.T.); +#266248 = EDGE_CURVE('',#266249,#266249,#266251,.T.); +#266249 = VERTEX_POINT('',#266250); +#266250 = CARTESIAN_POINT('',(114.81165,-74.6031,1.51)); +#266251 = CIRCLE('',#266252,0.5); +#266252 = AXIS2_PLACEMENT_3D('',#266253,#266254,#266255); +#266253 = CARTESIAN_POINT('',(114.81165,-74.1031,1.51)); +#266254 = DIRECTION('',(-0.,0.,-1.)); +#266255 = DIRECTION('',(-0.,-1.,0.)); +#266256 = FACE_BOUND('',#266257,.T.); +#266257 = EDGE_LOOP('',(#266258)); +#266258 = ORIENTED_EDGE('',*,*,#266259,.T.); +#266259 = EDGE_CURVE('',#266260,#266260,#266262,.T.); +#266260 = VERTEX_POINT('',#266261); +#266261 = CARTESIAN_POINT('',(116.27165,-81.8231,1.51)); +#266262 = CIRCLE('',#266263,0.5); +#266263 = AXIS2_PLACEMENT_3D('',#266264,#266265,#266266); +#266264 = CARTESIAN_POINT('',(116.27165,-81.3231,1.51)); +#266265 = DIRECTION('',(-0.,0.,-1.)); +#266266 = DIRECTION('',(-0.,-1.,0.)); +#266267 = FACE_BOUND('',#266268,.T.); +#266268 = EDGE_LOOP('',(#266269)); +#266269 = ORIENTED_EDGE('',*,*,#266270,.T.); +#266270 = EDGE_CURVE('',#266271,#266271,#266273,.T.); +#266271 = VERTEX_POINT('',#266272); +#266272 = CARTESIAN_POINT('',(118.81165,-81.8231,1.51)); +#266273 = CIRCLE('',#266274,0.5); +#266274 = AXIS2_PLACEMENT_3D('',#266275,#266276,#266277); +#266275 = CARTESIAN_POINT('',(118.81165,-81.3231,1.51)); +#266276 = DIRECTION('',(-0.,0.,-1.)); +#266277 = DIRECTION('',(-0.,-1.,0.)); +#266278 = FACE_BOUND('',#266279,.T.); +#266279 = EDGE_LOOP('',(#266280)); +#266280 = ORIENTED_EDGE('',*,*,#266281,.T.); +#266281 = EDGE_CURVE('',#266282,#266282,#266284,.T.); +#266282 = VERTEX_POINT('',#266283); +#266283 = CARTESIAN_POINT('',(121.35165,-81.8231,1.51)); +#266284 = CIRCLE('',#266285,0.5); +#266285 = AXIS2_PLACEMENT_3D('',#266286,#266287,#266288); +#266286 = CARTESIAN_POINT('',(121.35165,-81.3231,1.51)); +#266287 = DIRECTION('',(-0.,0.,-1.)); +#266288 = DIRECTION('',(-0.,-1.,0.)); +#266289 = FACE_BOUND('',#266290,.T.); +#266290 = EDGE_LOOP('',(#266291)); +#266291 = ORIENTED_EDGE('',*,*,#266292,.T.); +#266292 = EDGE_CURVE('',#266293,#266293,#266295,.T.); +#266293 = VERTEX_POINT('',#266294); +#266294 = CARTESIAN_POINT('',(123.89165,-81.8231,1.51)); +#266295 = CIRCLE('',#266296,0.5); +#266296 = AXIS2_PLACEMENT_3D('',#266297,#266298,#266299); +#266297 = CARTESIAN_POINT('',(123.89165,-81.3231,1.51)); +#266298 = DIRECTION('',(-0.,0.,-1.)); +#266299 = DIRECTION('',(-0.,-1.,0.)); +#266300 = FACE_BOUND('',#266301,.T.); +#266301 = EDGE_LOOP('',(#266302)); +#266302 = ORIENTED_EDGE('',*,*,#266303,.T.); +#266303 = EDGE_CURVE('',#266304,#266304,#266306,.T.); +#266304 = VERTEX_POINT('',#266305); +#266305 = CARTESIAN_POINT('',(126.43165,-81.8231,1.51)); +#266306 = CIRCLE('',#266307,0.5); +#266307 = AXIS2_PLACEMENT_3D('',#266308,#266309,#266310); +#266308 = CARTESIAN_POINT('',(126.43165,-81.3231,1.51)); +#266309 = DIRECTION('',(-0.,0.,-1.)); +#266310 = DIRECTION('',(-0.,-1.,0.)); +#266311 = FACE_BOUND('',#266312,.T.); +#266312 = EDGE_LOOP('',(#266313)); +#266313 = ORIENTED_EDGE('',*,*,#266314,.T.); +#266314 = EDGE_CURVE('',#266315,#266315,#266317,.T.); +#266315 = VERTEX_POINT('',#266316); +#266316 = CARTESIAN_POINT('',(128.97165,-81.8231,1.51)); +#266317 = CIRCLE('',#266318,0.5); +#266318 = AXIS2_PLACEMENT_3D('',#266319,#266320,#266321); +#266319 = CARTESIAN_POINT('',(128.97165,-81.3231,1.51)); +#266320 = DIRECTION('',(-0.,0.,-1.)); +#266321 = DIRECTION('',(-0.,-1.,0.)); +#266322 = FACE_BOUND('',#266323,.T.); +#266323 = EDGE_LOOP('',(#266324)); +#266324 = ORIENTED_EDGE('',*,*,#266325,.T.); +#266325 = EDGE_CURVE('',#266326,#266326,#266328,.T.); +#266326 = VERTEX_POINT('',#266327); +#266327 = CARTESIAN_POINT('',(133.03165,-81.8231,1.51)); +#266328 = CIRCLE('',#266329,0.5); +#266329 = AXIS2_PLACEMENT_3D('',#266330,#266331,#266332); +#266330 = CARTESIAN_POINT('',(133.03165,-81.3231,1.51)); +#266331 = DIRECTION('',(-0.,0.,-1.)); +#266332 = DIRECTION('',(-0.,-1.,0.)); +#266333 = FACE_BOUND('',#266334,.T.); +#266334 = EDGE_LOOP('',(#266335)); +#266335 = ORIENTED_EDGE('',*,*,#266336,.T.); +#266336 = EDGE_CURVE('',#266337,#266337,#266339,.T.); +#266337 = VERTEX_POINT('',#266338); +#266338 = CARTESIAN_POINT('',(135.57165,-81.8231,1.51)); +#266339 = CIRCLE('',#266340,0.5); +#266340 = AXIS2_PLACEMENT_3D('',#266341,#266342,#266343); +#266341 = CARTESIAN_POINT('',(135.57165,-81.3231,1.51)); +#266342 = DIRECTION('',(-0.,0.,-1.)); +#266343 = DIRECTION('',(-0.,-1.,0.)); +#266344 = FACE_BOUND('',#266345,.T.); +#266345 = EDGE_LOOP('',(#266346)); +#266346 = ORIENTED_EDGE('',*,*,#266347,.T.); +#266347 = EDGE_CURVE('',#266348,#266348,#266350,.T.); +#266348 = VERTEX_POINT('',#266349); +#266349 = CARTESIAN_POINT('',(138.11165,-81.8231,1.51)); +#266350 = CIRCLE('',#266351,0.5); +#266351 = AXIS2_PLACEMENT_3D('',#266352,#266353,#266354); +#266352 = CARTESIAN_POINT('',(138.11165,-81.3231,1.51)); +#266353 = DIRECTION('',(-0.,0.,-1.)); +#266354 = DIRECTION('',(-0.,-1.,0.)); +#266355 = FACE_BOUND('',#266356,.T.); +#266356 = EDGE_LOOP('',(#266357)); +#266357 = ORIENTED_EDGE('',*,*,#266358,.T.); +#266358 = EDGE_CURVE('',#266359,#266359,#266361,.T.); +#266359 = VERTEX_POINT('',#266360); +#266360 = CARTESIAN_POINT('',(140.65165,-81.8231,1.51)); +#266361 = CIRCLE('',#266362,0.5); +#266362 = AXIS2_PLACEMENT_3D('',#266363,#266364,#266365); +#266363 = CARTESIAN_POINT('',(140.65165,-81.3231,1.51)); +#266364 = DIRECTION('',(-0.,0.,-1.)); +#266365 = DIRECTION('',(-0.,-1.,0.)); +#266366 = FACE_BOUND('',#266367,.T.); +#266367 = EDGE_LOOP('',(#266368)); +#266368 = ORIENTED_EDGE('',*,*,#266369,.T.); +#266369 = EDGE_CURVE('',#266370,#266370,#266372,.T.); +#266370 = VERTEX_POINT('',#266371); +#266371 = CARTESIAN_POINT('',(143.19165,-81.8231,1.51)); +#266372 = CIRCLE('',#266373,0.5); +#266373 = AXIS2_PLACEMENT_3D('',#266374,#266375,#266376); +#266374 = CARTESIAN_POINT('',(143.19165,-81.3231,1.51)); +#266375 = DIRECTION('',(-0.,0.,-1.)); +#266376 = DIRECTION('',(-0.,-1.,0.)); +#266377 = FACE_BOUND('',#266378,.T.); +#266378 = EDGE_LOOP('',(#266379)); +#266379 = ORIENTED_EDGE('',*,*,#266380,.T.); +#266380 = EDGE_CURVE('',#266381,#266381,#266383,.T.); +#266381 = VERTEX_POINT('',#266382); +#266382 = CARTESIAN_POINT('',(145.73165,-81.8231,1.51)); +#266383 = CIRCLE('',#266384,0.5); +#266384 = AXIS2_PLACEMENT_3D('',#266385,#266386,#266387); +#266385 = CARTESIAN_POINT('',(145.73165,-81.3231,1.51)); +#266386 = DIRECTION('',(-0.,0.,-1.)); +#266387 = DIRECTION('',(-0.,-1.,0.)); +#266388 = FACE_BOUND('',#266389,.T.); +#266389 = EDGE_LOOP('',(#266390)); +#266390 = ORIENTED_EDGE('',*,*,#266391,.T.); +#266391 = EDGE_CURVE('',#266392,#266392,#266394,.T.); +#266392 = VERTEX_POINT('',#266393); +#266393 = CARTESIAN_POINT('',(117.35165,-74.6031,1.51)); +#266394 = CIRCLE('',#266395,0.5); +#266395 = AXIS2_PLACEMENT_3D('',#266396,#266397,#266398); +#266396 = CARTESIAN_POINT('',(117.35165,-74.1031,1.51)); +#266397 = DIRECTION('',(-0.,0.,-1.)); +#266398 = DIRECTION('',(-0.,-1.,0.)); +#266399 = FACE_BOUND('',#266400,.T.); +#266400 = EDGE_LOOP('',(#266401)); +#266401 = ORIENTED_EDGE('',*,*,#266402,.T.); +#266402 = EDGE_CURVE('',#266403,#266403,#266405,.T.); +#266403 = VERTEX_POINT('',#266404); +#266404 = CARTESIAN_POINT('',(119.89165,-74.6031,1.51)); +#266405 = CIRCLE('',#266406,0.5); +#266406 = AXIS2_PLACEMENT_3D('',#266407,#266408,#266409); +#266407 = CARTESIAN_POINT('',(119.89165,-74.1031,1.51)); +#266408 = DIRECTION('',(-0.,0.,-1.)); +#266409 = DIRECTION('',(-0.,-1.,0.)); +#266410 = FACE_BOUND('',#266411,.T.); +#266411 = EDGE_LOOP('',(#266412)); +#266412 = ORIENTED_EDGE('',*,*,#266413,.T.); +#266413 = EDGE_CURVE('',#266414,#266414,#266416,.T.); +#266414 = VERTEX_POINT('',#266415); +#266415 = CARTESIAN_POINT('',(122.43165,-74.6031,1.51)); +#266416 = CIRCLE('',#266417,0.5); +#266417 = AXIS2_PLACEMENT_3D('',#266418,#266419,#266420); +#266418 = CARTESIAN_POINT('',(122.43165,-74.1031,1.51)); +#266419 = DIRECTION('',(-0.,0.,-1.)); +#266420 = DIRECTION('',(-0.,-1.,0.)); +#266421 = FACE_BOUND('',#266422,.T.); +#266422 = EDGE_LOOP('',(#266423)); +#266423 = ORIENTED_EDGE('',*,*,#266424,.T.); +#266424 = EDGE_CURVE('',#266425,#266425,#266427,.T.); +#266425 = VERTEX_POINT('',#266426); +#266426 = CARTESIAN_POINT('',(124.97165,-74.6031,1.51)); +#266427 = CIRCLE('',#266428,0.5); +#266428 = AXIS2_PLACEMENT_3D('',#266429,#266430,#266431); +#266429 = CARTESIAN_POINT('',(124.97165,-74.1031,1.51)); +#266430 = DIRECTION('',(-0.,0.,-1.)); +#266431 = DIRECTION('',(-0.,-1.,0.)); +#266432 = FACE_BOUND('',#266433,.T.); +#266433 = EDGE_LOOP('',(#266434)); +#266434 = ORIENTED_EDGE('',*,*,#266435,.T.); +#266435 = EDGE_CURVE('',#266436,#266436,#266438,.T.); +#266436 = VERTEX_POINT('',#266437); +#266437 = CARTESIAN_POINT('',(127.51165,-74.6031,1.51)); +#266438 = CIRCLE('',#266439,0.5); +#266439 = AXIS2_PLACEMENT_3D('',#266440,#266441,#266442); +#266440 = CARTESIAN_POINT('',(127.51165,-74.1031,1.51)); +#266441 = DIRECTION('',(-0.,0.,-1.)); +#266442 = DIRECTION('',(-0.,-1.,0.)); +#266443 = FACE_BOUND('',#266444,.T.); +#266444 = EDGE_LOOP('',(#266445)); +#266445 = ORIENTED_EDGE('',*,*,#266446,.T.); +#266446 = EDGE_CURVE('',#266447,#266447,#266449,.T.); +#266447 = VERTEX_POINT('',#266448); +#266448 = CARTESIAN_POINT('',(130.05165,-74.6031,1.51)); +#266449 = CIRCLE('',#266450,0.5); +#266450 = AXIS2_PLACEMENT_3D('',#266451,#266452,#266453); +#266451 = CARTESIAN_POINT('',(130.05165,-74.1031,1.51)); +#266452 = DIRECTION('',(-0.,0.,-1.)); +#266453 = DIRECTION('',(-0.,-1.,0.)); +#266454 = FACE_BOUND('',#266455,.T.); +#266455 = EDGE_LOOP('',(#266456)); +#266456 = ORIENTED_EDGE('',*,*,#266457,.T.); +#266457 = EDGE_CURVE('',#266458,#266458,#266460,.T.); +#266458 = VERTEX_POINT('',#266459); +#266459 = CARTESIAN_POINT('',(132.59165,-74.6031,1.51)); +#266460 = CIRCLE('',#266461,0.5); +#266461 = AXIS2_PLACEMENT_3D('',#266462,#266463,#266464); +#266462 = CARTESIAN_POINT('',(132.59165,-74.1031,1.51)); +#266463 = DIRECTION('',(-0.,0.,-1.)); +#266464 = DIRECTION('',(-0.,-1.,0.)); +#266465 = FACE_BOUND('',#266466,.T.); +#266466 = EDGE_LOOP('',(#266467)); +#266467 = ORIENTED_EDGE('',*,*,#266468,.T.); +#266468 = EDGE_CURVE('',#266469,#266469,#266471,.T.); +#266469 = VERTEX_POINT('',#266470); +#266470 = CARTESIAN_POINT('',(135.13165,-74.6031,1.51)); +#266471 = CIRCLE('',#266472,0.5); +#266472 = AXIS2_PLACEMENT_3D('',#266473,#266474,#266475); +#266473 = CARTESIAN_POINT('',(135.13165,-74.1031,1.51)); +#266474 = DIRECTION('',(-0.,0.,-1.)); +#266475 = DIRECTION('',(-0.,-1.,0.)); +#266476 = FACE_BOUND('',#266477,.T.); +#266477 = EDGE_LOOP('',(#266478)); +#266478 = ORIENTED_EDGE('',*,*,#266479,.T.); +#266479 = EDGE_CURVE('',#266480,#266480,#266482,.T.); +#266480 = VERTEX_POINT('',#266481); +#266481 = CARTESIAN_POINT('',(137.67165,-74.6031,1.51)); +#266482 = CIRCLE('',#266483,0.5); +#266483 = AXIS2_PLACEMENT_3D('',#266484,#266485,#266486); +#266484 = CARTESIAN_POINT('',(137.67165,-74.1031,1.51)); +#266485 = DIRECTION('',(-0.,0.,-1.)); +#266486 = DIRECTION('',(-0.,-1.,0.)); +#266487 = FACE_BOUND('',#266488,.T.); +#266488 = EDGE_LOOP('',(#266489)); +#266489 = ORIENTED_EDGE('',*,*,#266490,.T.); +#266490 = EDGE_CURVE('',#266491,#266491,#266493,.T.); +#266491 = VERTEX_POINT('',#266492); +#266492 = CARTESIAN_POINT('',(140.21165,-74.6031,1.51)); +#266493 = CIRCLE('',#266494,0.5); +#266494 = AXIS2_PLACEMENT_3D('',#266495,#266496,#266497); +#266495 = CARTESIAN_POINT('',(140.21165,-74.1031,1.51)); +#266496 = DIRECTION('',(-0.,0.,-1.)); +#266497 = DIRECTION('',(-0.,-1.,0.)); +#266498 = FACE_BOUND('',#266499,.T.); +#266499 = EDGE_LOOP('',(#266500)); +#266500 = ORIENTED_EDGE('',*,*,#266501,.T.); +#266501 = EDGE_CURVE('',#266502,#266502,#266504,.T.); +#266502 = VERTEX_POINT('',#266503); +#266503 = CARTESIAN_POINT('',(142.75165,-74.6031,1.51)); +#266504 = CIRCLE('',#266505,0.5); +#266505 = AXIS2_PLACEMENT_3D('',#266506,#266507,#266508); +#266506 = CARTESIAN_POINT('',(142.75165,-74.1031,1.51)); +#266507 = DIRECTION('',(-0.,0.,-1.)); +#266508 = DIRECTION('',(-0.,-1.,0.)); +#266509 = FACE_BOUND('',#266510,.T.); +#266510 = EDGE_LOOP('',(#266511)); +#266511 = ORIENTED_EDGE('',*,*,#266512,.T.); +#266512 = EDGE_CURVE('',#266513,#266513,#266515,.T.); +#266513 = VERTEX_POINT('',#266514); +#266514 = CARTESIAN_POINT('',(145.29165,-74.6031,1.51)); +#266515 = CIRCLE('',#266516,0.5); +#266516 = AXIS2_PLACEMENT_3D('',#266517,#266518,#266519); +#266517 = CARTESIAN_POINT('',(145.29165,-74.1031,1.51)); +#266518 = DIRECTION('',(-0.,0.,-1.)); +#266519 = DIRECTION('',(-0.,-1.,0.)); +#266520 = FACE_BOUND('',#266521,.T.); +#266521 = EDGE_LOOP('',(#266522)); +#266522 = ORIENTED_EDGE('',*,*,#266523,.T.); +#266523 = EDGE_CURVE('',#266524,#266524,#266526,.T.); +#266524 = VERTEX_POINT('',#266525); +#266525 = CARTESIAN_POINT('',(147.83165,-74.6031,1.51)); +#266526 = CIRCLE('',#266527,0.5); +#266527 = AXIS2_PLACEMENT_3D('',#266528,#266529,#266530); +#266528 = CARTESIAN_POINT('',(147.83165,-74.1031,1.51)); +#266529 = DIRECTION('',(-0.,0.,-1.)); +#266530 = DIRECTION('',(-0.,-1.,0.)); +#266531 = FACE_BOUND('',#266532,.T.); +#266532 = EDGE_LOOP('',(#266533)); +#266533 = ORIENTED_EDGE('',*,*,#266534,.T.); +#266534 = EDGE_CURVE('',#266535,#266535,#266537,.T.); +#266535 = VERTEX_POINT('',#266536); +#266536 = CARTESIAN_POINT('',(107.19165,-56.8231,1.51)); +#266537 = CIRCLE('',#266538,0.5); +#266538 = AXIS2_PLACEMENT_3D('',#266539,#266540,#266541); +#266539 = CARTESIAN_POINT('',(107.19165,-56.3231,1.51)); +#266540 = DIRECTION('',(-0.,0.,-1.)); +#266541 = DIRECTION('',(-0.,-1.,0.)); +#266542 = FACE_BOUND('',#266543,.T.); +#266543 = EDGE_LOOP('',(#266544)); +#266544 = ORIENTED_EDGE('',*,*,#266545,.T.); +#266545 = EDGE_CURVE('',#266546,#266546,#266548,.T.); +#266546 = VERTEX_POINT('',#266547); +#266547 = CARTESIAN_POINT('',(109.73165,-56.8231,1.51)); +#266548 = CIRCLE('',#266549,0.5); +#266549 = AXIS2_PLACEMENT_3D('',#266550,#266551,#266552); +#266550 = CARTESIAN_POINT('',(109.73165,-56.3231,1.51)); +#266551 = DIRECTION('',(-0.,0.,-1.)); +#266552 = DIRECTION('',(-0.,-1.,0.)); +#266553 = FACE_BOUND('',#266554,.T.); +#266554 = EDGE_LOOP('',(#266555)); +#266555 = ORIENTED_EDGE('',*,*,#266556,.T.); +#266556 = EDGE_CURVE('',#266557,#266557,#266559,.T.); +#266557 = VERTEX_POINT('',#266558); +#266558 = CARTESIAN_POINT('',(112.27165,-56.8231,1.51)); +#266559 = CIRCLE('',#266560,0.5); +#266560 = AXIS2_PLACEMENT_3D('',#266561,#266562,#266563); +#266561 = CARTESIAN_POINT('',(112.27165,-56.3231,1.51)); +#266562 = DIRECTION('',(-0.,0.,-1.)); +#266563 = DIRECTION('',(-0.,-1.,0.)); +#266564 = FACE_BOUND('',#266565,.T.); +#266565 = EDGE_LOOP('',(#266566)); +#266566 = ORIENTED_EDGE('',*,*,#266567,.T.); +#266567 = EDGE_CURVE('',#266568,#266568,#266570,.T.); +#266568 = VERTEX_POINT('',#266569); +#266569 = CARTESIAN_POINT('',(114.81165,-56.8231,1.51)); +#266570 = CIRCLE('',#266571,0.5); +#266571 = AXIS2_PLACEMENT_3D('',#266572,#266573,#266574); +#266572 = CARTESIAN_POINT('',(114.81165,-56.3231,1.51)); +#266573 = DIRECTION('',(-0.,0.,-1.)); +#266574 = DIRECTION('',(-0.,-1.,0.)); +#266575 = FACE_BOUND('',#266576,.T.); +#266576 = EDGE_LOOP('',(#266577)); +#266577 = ORIENTED_EDGE('',*,*,#266578,.T.); +#266578 = EDGE_CURVE('',#266579,#266579,#266581,.T.); +#266579 = VERTEX_POINT('',#266580); +#266580 = CARTESIAN_POINT('',(85.19165,-46.9231,1.51)); +#266581 = CIRCLE('',#266582,1.6); +#266582 = AXIS2_PLACEMENT_3D('',#266583,#266584,#266585); +#266583 = CARTESIAN_POINT('',(85.19165,-45.3231,1.51)); +#266584 = DIRECTION('',(-0.,0.,-1.)); +#266585 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#266586 = FACE_BOUND('',#266587,.T.); +#266587 = EDGE_LOOP('',(#266588)); +#266588 = ORIENTED_EDGE('',*,*,#266589,.T.); +#266589 = EDGE_CURVE('',#266590,#266590,#266592,.T.); +#266590 = VERTEX_POINT('',#266591); +#266591 = CARTESIAN_POINT('',(98.19165,-46.7981,1.51)); +#266592 = CIRCLE('',#266593,0.475); +#266593 = AXIS2_PLACEMENT_3D('',#266594,#266595,#266596); +#266594 = CARTESIAN_POINT('',(98.19165,-46.3231,1.51)); +#266595 = DIRECTION('',(-0.,0.,-1.)); +#266596 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266597 = FACE_BOUND('',#266598,.T.); +#266598 = EDGE_LOOP('',(#266599)); +#266599 = ORIENTED_EDGE('',*,*,#266600,.T.); +#266600 = EDGE_CURVE('',#266601,#266601,#266603,.T.); +#266601 = VERTEX_POINT('',#266602); +#266602 = CARTESIAN_POINT('',(111.19165,-51.9031,1.51)); +#266603 = CIRCLE('',#266604,0.5); +#266604 = AXIS2_PLACEMENT_3D('',#266605,#266606,#266607); +#266605 = CARTESIAN_POINT('',(111.19165,-51.4031,1.51)); +#266606 = DIRECTION('',(-0.,0.,-1.)); +#266607 = DIRECTION('',(-0.,-1.,0.)); +#266608 = FACE_BOUND('',#266609,.T.); +#266609 = EDGE_LOOP('',(#266610)); +#266610 = ORIENTED_EDGE('',*,*,#266611,.T.); +#266611 = EDGE_CURVE('',#266612,#266612,#266614,.T.); +#266612 = VERTEX_POINT('',#266613); +#266613 = CARTESIAN_POINT('',(100.69165,-46.7981,1.51)); +#266614 = CIRCLE('',#266615,0.475); +#266615 = AXIS2_PLACEMENT_3D('',#266616,#266617,#266618); +#266616 = CARTESIAN_POINT('',(100.69165,-46.3231,1.51)); +#266617 = DIRECTION('',(-0.,0.,-1.)); +#266618 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266619 = FACE_BOUND('',#266620,.T.); +#266620 = EDGE_LOOP('',(#266621)); +#266621 = ORIENTED_EDGE('',*,*,#266622,.T.); +#266622 = EDGE_CURVE('',#266623,#266623,#266625,.T.); +#266623 = VERTEX_POINT('',#266624); +#266624 = CARTESIAN_POINT('',(103.19165,-46.7981,1.51)); +#266625 = CIRCLE('',#266626,0.475); +#266626 = AXIS2_PLACEMENT_3D('',#266627,#266628,#266629); +#266627 = CARTESIAN_POINT('',(103.19165,-46.3231,1.51)); +#266628 = DIRECTION('',(-0.,0.,-1.)); +#266629 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266630 = FACE_BOUND('',#266631,.T.); +#266631 = EDGE_LOOP('',(#266632)); +#266632 = ORIENTED_EDGE('',*,*,#266633,.T.); +#266633 = EDGE_CURVE('',#266634,#266634,#266636,.T.); +#266634 = VERTEX_POINT('',#266635); +#266635 = CARTESIAN_POINT('',(105.69165,-46.7981,1.51)); +#266636 = CIRCLE('',#266637,0.475); +#266637 = AXIS2_PLACEMENT_3D('',#266638,#266639,#266640); +#266638 = CARTESIAN_POINT('',(105.69165,-46.3231,1.51)); +#266639 = DIRECTION('',(-0.,0.,-1.)); +#266640 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266641 = FACE_BOUND('',#266642,.T.); +#266642 = EDGE_LOOP('',(#266643)); +#266643 = ORIENTED_EDGE('',*,*,#266644,.T.); +#266644 = EDGE_CURVE('',#266645,#266645,#266647,.T.); +#266645 = VERTEX_POINT('',#266646); +#266646 = CARTESIAN_POINT('',(111.19165,-49.3631,1.51)); +#266647 = CIRCLE('',#266648,0.5); +#266648 = AXIS2_PLACEMENT_3D('',#266649,#266650,#266651); +#266649 = CARTESIAN_POINT('',(111.19165,-48.8631,1.51)); +#266650 = DIRECTION('',(-0.,0.,-1.)); +#266651 = DIRECTION('',(-0.,-1.,0.)); +#266652 = FACE_BOUND('',#266653,.T.); +#266653 = EDGE_LOOP('',(#266654)); +#266654 = ORIENTED_EDGE('',*,*,#266655,.T.); +#266655 = EDGE_CURVE('',#266656,#266656,#266658,.T.); +#266656 = VERTEX_POINT('',#266657); +#266657 = CARTESIAN_POINT('',(111.19165,-46.8231,1.51)); +#266658 = CIRCLE('',#266659,0.5); +#266659 = AXIS2_PLACEMENT_3D('',#266660,#266661,#266662); +#266660 = CARTESIAN_POINT('',(111.19165,-46.3231,1.51)); +#266661 = DIRECTION('',(-0.,0.,-1.)); +#266662 = DIRECTION('',(-0.,-1.,0.)); +#266663 = FACE_BOUND('',#266664,.T.); +#266664 = EDGE_LOOP('',(#266665)); +#266665 = ORIENTED_EDGE('',*,*,#266666,.T.); +#266666 = EDGE_CURVE('',#266667,#266667,#266669,.T.); +#266667 = VERTEX_POINT('',#266668); +#266668 = CARTESIAN_POINT('',(117.35165,-56.8231,1.51)); +#266669 = CIRCLE('',#266670,0.5); +#266670 = AXIS2_PLACEMENT_3D('',#266671,#266672,#266673); +#266671 = CARTESIAN_POINT('',(117.35165,-56.3231,1.51)); +#266672 = DIRECTION('',(-0.,0.,-1.)); +#266673 = DIRECTION('',(-0.,-1.,0.)); +#266674 = FACE_BOUND('',#266675,.T.); +#266675 = EDGE_LOOP('',(#266676)); +#266676 = ORIENTED_EDGE('',*,*,#266677,.T.); +#266677 = EDGE_CURVE('',#266678,#266678,#266680,.T.); +#266678 = VERTEX_POINT('',#266679); +#266679 = CARTESIAN_POINT('',(119.89165,-56.8231,1.51)); +#266680 = CIRCLE('',#266681,0.5); +#266681 = AXIS2_PLACEMENT_3D('',#266682,#266683,#266684); +#266682 = CARTESIAN_POINT('',(119.89165,-56.3231,1.51)); +#266683 = DIRECTION('',(-0.,0.,-1.)); +#266684 = DIRECTION('',(-0.,-1.,0.)); +#266685 = FACE_BOUND('',#266686,.T.); +#266686 = EDGE_LOOP('',(#266687)); +#266687 = ORIENTED_EDGE('',*,*,#266688,.T.); +#266688 = EDGE_CURVE('',#266689,#266689,#266691,.T.); +#266689 = VERTEX_POINT('',#266690); +#266690 = CARTESIAN_POINT('',(122.43165,-56.8231,1.51)); +#266691 = CIRCLE('',#266692,0.5); +#266692 = AXIS2_PLACEMENT_3D('',#266693,#266694,#266695); +#266693 = CARTESIAN_POINT('',(122.43165,-56.3231,1.51)); +#266694 = DIRECTION('',(-0.,0.,-1.)); +#266695 = DIRECTION('',(-0.,-1.,0.)); +#266696 = FACE_BOUND('',#266697,.T.); +#266697 = EDGE_LOOP('',(#266698)); +#266698 = ORIENTED_EDGE('',*,*,#266699,.T.); +#266699 = EDGE_CURVE('',#266700,#266700,#266702,.T.); +#266700 = VERTEX_POINT('',#266701); +#266701 = CARTESIAN_POINT('',(124.97165,-56.8231,1.51)); +#266702 = CIRCLE('',#266703,0.5); +#266703 = AXIS2_PLACEMENT_3D('',#266704,#266705,#266706); +#266704 = CARTESIAN_POINT('',(124.97165,-56.3231,1.51)); +#266705 = DIRECTION('',(-0.,0.,-1.)); +#266706 = DIRECTION('',(-0.,-1.,0.)); +#266707 = FACE_BOUND('',#266708,.T.); +#266708 = EDGE_LOOP('',(#266709)); +#266709 = ORIENTED_EDGE('',*,*,#266710,.T.); +#266710 = EDGE_CURVE('',#266711,#266711,#266713,.T.); +#266711 = VERTEX_POINT('',#266712); +#266712 = CARTESIAN_POINT('',(127.51165,-56.8231,1.51)); +#266713 = CIRCLE('',#266714,0.5); +#266714 = AXIS2_PLACEMENT_3D('',#266715,#266716,#266717); +#266715 = CARTESIAN_POINT('',(127.51165,-56.3231,1.51)); +#266716 = DIRECTION('',(-0.,0.,-1.)); +#266717 = DIRECTION('',(-0.,-1.,0.)); +#266718 = FACE_BOUND('',#266719,.T.); +#266719 = EDGE_LOOP('',(#266720)); +#266720 = ORIENTED_EDGE('',*,*,#266721,.T.); +#266721 = EDGE_CURVE('',#266722,#266722,#266724,.T.); +#266722 = VERTEX_POINT('',#266723); +#266723 = CARTESIAN_POINT('',(130.05165,-56.8231,1.51)); +#266724 = CIRCLE('',#266725,0.5); +#266725 = AXIS2_PLACEMENT_3D('',#266726,#266727,#266728); +#266726 = CARTESIAN_POINT('',(130.05165,-56.3231,1.51)); +#266727 = DIRECTION('',(-0.,0.,-1.)); +#266728 = DIRECTION('',(-0.,-1.,0.)); +#266729 = FACE_BOUND('',#266730,.T.); +#266730 = EDGE_LOOP('',(#266731)); +#266731 = ORIENTED_EDGE('',*,*,#266732,.T.); +#266732 = EDGE_CURVE('',#266733,#266733,#266735,.T.); +#266733 = VERTEX_POINT('',#266734); +#266734 = CARTESIAN_POINT('',(132.59165,-56.8231,1.51)); +#266735 = CIRCLE('',#266736,0.5); +#266736 = AXIS2_PLACEMENT_3D('',#266737,#266738,#266739); +#266737 = CARTESIAN_POINT('',(132.59165,-56.3231,1.51)); +#266738 = DIRECTION('',(-0.,0.,-1.)); +#266739 = DIRECTION('',(-0.,-1.,0.)); +#266740 = FACE_BOUND('',#266741,.T.); +#266741 = EDGE_LOOP('',(#266742)); +#266742 = ORIENTED_EDGE('',*,*,#266743,.T.); +#266743 = EDGE_CURVE('',#266744,#266744,#266746,.T.); +#266744 = VERTEX_POINT('',#266745); +#266745 = CARTESIAN_POINT('',(135.13165,-56.8231,1.51)); +#266746 = CIRCLE('',#266747,0.5); +#266747 = AXIS2_PLACEMENT_3D('',#266748,#266749,#266750); +#266748 = CARTESIAN_POINT('',(135.13165,-56.3231,1.51)); +#266749 = DIRECTION('',(-0.,0.,-1.)); +#266750 = DIRECTION('',(-0.,-1.,0.)); +#266751 = FACE_BOUND('',#266752,.T.); +#266752 = EDGE_LOOP('',(#266753)); +#266753 = ORIENTED_EDGE('',*,*,#266754,.T.); +#266754 = EDGE_CURVE('',#266755,#266755,#266757,.T.); +#266755 = VERTEX_POINT('',#266756); +#266756 = CARTESIAN_POINT('',(137.67165,-56.8231,1.51)); +#266757 = CIRCLE('',#266758,0.5); +#266758 = AXIS2_PLACEMENT_3D('',#266759,#266760,#266761); +#266759 = CARTESIAN_POINT('',(137.67165,-56.3231,1.51)); +#266760 = DIRECTION('',(-0.,0.,-1.)); +#266761 = DIRECTION('',(-0.,-1.,0.)); +#266762 = FACE_BOUND('',#266763,.T.); +#266763 = EDGE_LOOP('',(#266764)); +#266764 = ORIENTED_EDGE('',*,*,#266765,.T.); +#266765 = EDGE_CURVE('',#266766,#266766,#266768,.T.); +#266766 = VERTEX_POINT('',#266767); +#266767 = CARTESIAN_POINT('',(140.21165,-56.8231,1.51)); +#266768 = CIRCLE('',#266769,0.5); +#266769 = AXIS2_PLACEMENT_3D('',#266770,#266771,#266772); +#266770 = CARTESIAN_POINT('',(140.21165,-56.3231,1.51)); +#266771 = DIRECTION('',(-0.,0.,-1.)); +#266772 = DIRECTION('',(-0.,-1.,0.)); +#266773 = FACE_BOUND('',#266774,.T.); +#266774 = EDGE_LOOP('',(#266775)); +#266775 = ORIENTED_EDGE('',*,*,#266776,.T.); +#266776 = EDGE_CURVE('',#266777,#266777,#266779,.T.); +#266777 = VERTEX_POINT('',#266778); +#266778 = CARTESIAN_POINT('',(142.75165,-56.8231,1.51)); +#266779 = CIRCLE('',#266780,0.5); +#266780 = AXIS2_PLACEMENT_3D('',#266781,#266782,#266783); +#266781 = CARTESIAN_POINT('',(142.75165,-56.3231,1.51)); +#266782 = DIRECTION('',(-0.,0.,-1.)); +#266783 = DIRECTION('',(-0.,-1.,0.)); +#266784 = FACE_BOUND('',#266785,.T.); +#266785 = EDGE_LOOP('',(#266786)); +#266786 = ORIENTED_EDGE('',*,*,#266787,.T.); +#266787 = EDGE_CURVE('',#266788,#266788,#266790,.T.); +#266788 = VERTEX_POINT('',#266789); +#266789 = CARTESIAN_POINT('',(145.29165,-56.8231,1.51)); +#266790 = CIRCLE('',#266791,0.5); +#266791 = AXIS2_PLACEMENT_3D('',#266792,#266793,#266794); +#266792 = CARTESIAN_POINT('',(145.29165,-56.3231,1.51)); +#266793 = DIRECTION('',(-0.,0.,-1.)); +#266794 = DIRECTION('',(-0.,-1.,0.)); +#266795 = FACE_BOUND('',#266796,.T.); +#266796 = EDGE_LOOP('',(#266797)); +#266797 = ORIENTED_EDGE('',*,*,#266798,.T.); +#266798 = EDGE_CURVE('',#266799,#266799,#266801,.T.); +#266799 = VERTEX_POINT('',#266800); +#266800 = CARTESIAN_POINT('',(147.83165,-56.8231,1.51)); +#266801 = CIRCLE('',#266802,0.5); +#266802 = AXIS2_PLACEMENT_3D('',#266803,#266804,#266805); +#266803 = CARTESIAN_POINT('',(147.83165,-56.3231,1.51)); +#266804 = DIRECTION('',(-0.,0.,-1.)); +#266805 = DIRECTION('',(-0.,-1.,0.)); +#266806 = FACE_BOUND('',#266807,.T.); +#266807 = EDGE_LOOP('',(#266808)); +#266808 = ORIENTED_EDGE('',*,*,#266809,.T.); +#266809 = EDGE_CURVE('',#266810,#266810,#266812,.T.); +#266810 = VERTEX_POINT('',#266811); +#266811 = CARTESIAN_POINT('',(116.19165,-46.7981,1.51)); +#266812 = CIRCLE('',#266813,0.475); +#266813 = AXIS2_PLACEMENT_3D('',#266814,#266815,#266816); +#266814 = CARTESIAN_POINT('',(116.19165,-46.3231,1.51)); +#266815 = DIRECTION('',(-0.,0.,-1.)); +#266816 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266817 = FACE_BOUND('',#266818,.T.); +#266818 = EDGE_LOOP('',(#266819)); +#266819 = ORIENTED_EDGE('',*,*,#266820,.T.); +#266820 = EDGE_CURVE('',#266821,#266821,#266823,.T.); +#266821 = VERTEX_POINT('',#266822); +#266822 = CARTESIAN_POINT('',(118.69165,-46.7981,1.51)); +#266823 = CIRCLE('',#266824,0.475); +#266824 = AXIS2_PLACEMENT_3D('',#266825,#266826,#266827); +#266825 = CARTESIAN_POINT('',(118.69165,-46.3231,1.51)); +#266826 = DIRECTION('',(-0.,0.,-1.)); +#266827 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266828 = FACE_BOUND('',#266829,.T.); +#266829 = EDGE_LOOP('',(#266830)); +#266830 = ORIENTED_EDGE('',*,*,#266831,.T.); +#266831 = EDGE_CURVE('',#266832,#266832,#266834,.T.); +#266832 = VERTEX_POINT('',#266833); +#266833 = CARTESIAN_POINT('',(121.19165,-46.7981,1.51)); +#266834 = CIRCLE('',#266835,0.475); +#266835 = AXIS2_PLACEMENT_3D('',#266836,#266837,#266838); +#266836 = CARTESIAN_POINT('',(121.19165,-46.3231,1.51)); +#266837 = DIRECTION('',(-0.,0.,-1.)); +#266838 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266839 = FACE_BOUND('',#266840,.T.); +#266840 = EDGE_LOOP('',(#266841)); +#266841 = ORIENTED_EDGE('',*,*,#266842,.T.); +#266842 = EDGE_CURVE('',#266843,#266843,#266845,.T.); +#266843 = VERTEX_POINT('',#266844); +#266844 = CARTESIAN_POINT('',(127.19165,-46.8231,1.51)); +#266845 = CIRCLE('',#266846,0.5); +#266846 = AXIS2_PLACEMENT_3D('',#266847,#266848,#266849); +#266847 = CARTESIAN_POINT('',(127.19165,-46.3231,1.51)); +#266848 = DIRECTION('',(-0.,0.,-1.)); +#266849 = DIRECTION('',(-0.,-1.,0.)); +#266850 = FACE_BOUND('',#266851,.T.); +#266851 = EDGE_LOOP('',(#266852)); +#266852 = ORIENTED_EDGE('',*,*,#266853,.T.); +#266853 = EDGE_CURVE('',#266854,#266854,#266856,.T.); +#266854 = VERTEX_POINT('',#266855); +#266855 = CARTESIAN_POINT('',(129.69165,-46.8231,1.51)); +#266856 = CIRCLE('',#266857,0.5); +#266857 = AXIS2_PLACEMENT_3D('',#266858,#266859,#266860); +#266858 = CARTESIAN_POINT('',(129.69165,-46.3231,1.51)); +#266859 = DIRECTION('',(-0.,0.,-1.)); +#266860 = DIRECTION('',(-0.,-1.,0.)); +#266861 = FACE_BOUND('',#266862,.T.); +#266862 = EDGE_LOOP('',(#266863)); +#266863 = ORIENTED_EDGE('',*,*,#266864,.T.); +#266864 = EDGE_CURVE('',#266865,#266865,#266867,.T.); +#266865 = VERTEX_POINT('',#266866); +#266866 = CARTESIAN_POINT('',(135.79165,-46.8231,1.51)); +#266867 = CIRCLE('',#266868,0.5); +#266868 = AXIS2_PLACEMENT_3D('',#266869,#266870,#266871); +#266869 = CARTESIAN_POINT('',(135.79165,-46.3231,1.51)); +#266870 = DIRECTION('',(-0.,0.,-1.)); +#266871 = DIRECTION('',(-0.,-1.,0.)); +#266872 = FACE_BOUND('',#266873,.T.); +#266873 = EDGE_LOOP('',(#266874)); +#266874 = ORIENTED_EDGE('',*,*,#266875,.T.); +#266875 = EDGE_CURVE('',#266876,#266876,#266878,.T.); +#266876 = VERTEX_POINT('',#266877); +#266877 = CARTESIAN_POINT('',(138.29165,-46.8231,1.51)); +#266878 = CIRCLE('',#266879,0.5); +#266879 = AXIS2_PLACEMENT_3D('',#266880,#266881,#266882); +#266880 = CARTESIAN_POINT('',(138.29165,-46.3231,1.51)); +#266881 = DIRECTION('',(-0.,0.,-1.)); +#266882 = DIRECTION('',(-0.,-1.,0.)); +#266883 = FACE_BOUND('',#266884,.T.); +#266884 = EDGE_LOOP('',(#266885)); +#266885 = ORIENTED_EDGE('',*,*,#266886,.T.); +#266886 = EDGE_CURVE('',#266887,#266887,#266889,.T.); +#266887 = VERTEX_POINT('',#266888); +#266888 = CARTESIAN_POINT('',(148.27165,-81.8231,1.51)); +#266889 = CIRCLE('',#266890,0.5); +#266890 = AXIS2_PLACEMENT_3D('',#266891,#266892,#266893); +#266891 = CARTESIAN_POINT('',(148.27165,-81.3231,1.51)); +#266892 = DIRECTION('',(-0.,0.,-1.)); +#266893 = DIRECTION('',(-0.,-1.,0.)); +#266894 = FACE_BOUND('',#266895,.T.); +#266895 = EDGE_LOOP('',(#266896)); +#266896 = ORIENTED_EDGE('',*,*,#266897,.T.); +#266897 = EDGE_CURVE('',#266898,#266898,#266900,.T.); +#266898 = VERTEX_POINT('',#266899); +#266899 = CARTESIAN_POINT('',(150.81165,-81.8231,1.51)); +#266900 = CIRCLE('',#266901,0.5); +#266901 = AXIS2_PLACEMENT_3D('',#266902,#266903,#266904); +#266902 = CARTESIAN_POINT('',(150.81165,-81.3231,1.51)); +#266903 = DIRECTION('',(-0.,0.,-1.)); +#266904 = DIRECTION('',(-0.,-1.,0.)); +#266905 = FACE_BOUND('',#266906,.T.); +#266906 = EDGE_LOOP('',(#266907)); +#266907 = ORIENTED_EDGE('',*,*,#266908,.T.); +#266908 = EDGE_CURVE('',#266909,#266909,#266911,.T.); +#266909 = VERTEX_POINT('',#266910); +#266910 = CARTESIAN_POINT('',(174.19165,-91.2231,1.51)); +#266911 = CIRCLE('',#266912,0.4); +#266912 = AXIS2_PLACEMENT_3D('',#266913,#266914,#266915); +#266913 = CARTESIAN_POINT('',(174.19165,-90.8231,1.51)); +#266914 = DIRECTION('',(-0.,0.,-1.)); +#266915 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266916 = FACE_BOUND('',#266917,.T.); +#266917 = EDGE_LOOP('',(#266918)); +#266918 = ORIENTED_EDGE('',*,*,#266919,.T.); +#266919 = EDGE_CURVE('',#266920,#266920,#266922,.T.); +#266920 = VERTEX_POINT('',#266921); +#266921 = CARTESIAN_POINT('',(174.19165,-89.2231,1.51)); +#266922 = CIRCLE('',#266923,0.4); +#266923 = AXIS2_PLACEMENT_3D('',#266924,#266925,#266926); +#266924 = CARTESIAN_POINT('',(174.19165,-88.8231,1.51)); +#266925 = DIRECTION('',(-0.,0.,-1.)); +#266926 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266927 = FACE_BOUND('',#266928,.T.); +#266928 = EDGE_LOOP('',(#266929)); +#266929 = ORIENTED_EDGE('',*,*,#266930,.T.); +#266930 = EDGE_CURVE('',#266931,#266931,#266933,.T.); +#266931 = VERTEX_POINT('',#266932); +#266932 = CARTESIAN_POINT('',(174.19165,-87.2231,1.51)); +#266933 = CIRCLE('',#266934,0.4); +#266934 = AXIS2_PLACEMENT_3D('',#266935,#266936,#266937); +#266935 = CARTESIAN_POINT('',(174.19165,-86.8231,1.51)); +#266936 = DIRECTION('',(-0.,0.,-1.)); +#266937 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266938 = FACE_BOUND('',#266939,.T.); +#266939 = EDGE_LOOP('',(#266940)); +#266940 = ORIENTED_EDGE('',*,*,#266941,.T.); +#266941 = EDGE_CURVE('',#266942,#266942,#266944,.T.); +#266942 = VERTEX_POINT('',#266943); +#266943 = CARTESIAN_POINT('',(174.19165,-85.2231,1.51)); +#266944 = CIRCLE('',#266945,0.4); +#266945 = AXIS2_PLACEMENT_3D('',#266946,#266947,#266948); +#266946 = CARTESIAN_POINT('',(174.19165,-84.8231,1.51)); +#266947 = DIRECTION('',(-0.,0.,-1.)); +#266948 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266949 = FACE_BOUND('',#266950,.T.); +#266950 = EDGE_LOOP('',(#266951)); +#266951 = ORIENTED_EDGE('',*,*,#266952,.T.); +#266952 = EDGE_CURVE('',#266953,#266953,#266955,.T.); +#266953 = VERTEX_POINT('',#266954); +#266954 = CARTESIAN_POINT('',(174.19165,-83.2231,1.51)); +#266955 = CIRCLE('',#266956,0.4); +#266956 = AXIS2_PLACEMENT_3D('',#266957,#266958,#266959); +#266957 = CARTESIAN_POINT('',(174.19165,-82.8231,1.51)); +#266958 = DIRECTION('',(-0.,0.,-1.)); +#266959 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266960 = FACE_BOUND('',#266961,.T.); +#266961 = EDGE_LOOP('',(#266962)); +#266962 = ORIENTED_EDGE('',*,*,#266963,.T.); +#266963 = EDGE_CURVE('',#266964,#266964,#266966,.T.); +#266964 = VERTEX_POINT('',#266965); +#266965 = CARTESIAN_POINT('',(174.19165,-81.2231,1.51)); +#266966 = CIRCLE('',#266967,0.4); +#266967 = AXIS2_PLACEMENT_3D('',#266968,#266969,#266970); +#266968 = CARTESIAN_POINT('',(174.19165,-80.8231,1.51)); +#266969 = DIRECTION('',(-0.,0.,-1.)); +#266970 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266971 = FACE_BOUND('',#266972,.T.); +#266972 = EDGE_LOOP('',(#266973)); +#266973 = ORIENTED_EDGE('',*,*,#266974,.T.); +#266974 = EDGE_CURVE('',#266975,#266975,#266977,.T.); +#266975 = VERTEX_POINT('',#266976); +#266976 = CARTESIAN_POINT('',(150.37165,-74.6031,1.51)); +#266977 = CIRCLE('',#266978,0.5); +#266978 = AXIS2_PLACEMENT_3D('',#266979,#266980,#266981); +#266979 = CARTESIAN_POINT('',(150.37165,-74.1031,1.51)); +#266980 = DIRECTION('',(-0.,0.,-1.)); +#266981 = DIRECTION('',(-0.,-1.,0.)); +#266982 = FACE_BOUND('',#266983,.T.); +#266983 = EDGE_LOOP('',(#266984)); +#266984 = ORIENTED_EDGE('',*,*,#266985,.T.); +#266985 = EDGE_CURVE('',#266986,#266986,#266988,.T.); +#266986 = VERTEX_POINT('',#266987); +#266987 = CARTESIAN_POINT('',(152.91165,-74.6031,1.51)); +#266988 = CIRCLE('',#266989,0.5); +#266989 = AXIS2_PLACEMENT_3D('',#266990,#266991,#266992); +#266990 = CARTESIAN_POINT('',(152.91165,-74.1031,1.51)); +#266991 = DIRECTION('',(-0.,0.,-1.)); +#266992 = DIRECTION('',(-0.,-1.,0.)); +#266993 = FACE_BOUND('',#266994,.T.); +#266994 = EDGE_LOOP('',(#266995)); +#266995 = ORIENTED_EDGE('',*,*,#266996,.T.); +#266996 = EDGE_CURVE('',#266997,#266997,#266999,.T.); +#266997 = VERTEX_POINT('',#266998); +#266998 = CARTESIAN_POINT('',(155.45165,-74.6031,1.51)); +#266999 = CIRCLE('',#267000,0.5); +#267000 = AXIS2_PLACEMENT_3D('',#267001,#267002,#267003); +#267001 = CARTESIAN_POINT('',(155.45165,-74.1031,1.51)); +#267002 = DIRECTION('',(-0.,0.,-1.)); +#267003 = DIRECTION('',(-0.,-1.,0.)); +#267004 = FACE_BOUND('',#267005,.T.); +#267005 = EDGE_LOOP('',(#267006)); +#267006 = ORIENTED_EDGE('',*,*,#267007,.T.); +#267007 = EDGE_CURVE('',#267008,#267008,#267010,.T.); +#267008 = VERTEX_POINT('',#267009); +#267009 = CARTESIAN_POINT('',(174.19165,-79.2231,1.51)); +#267010 = CIRCLE('',#267011,0.4); +#267011 = AXIS2_PLACEMENT_3D('',#267012,#267013,#267014); +#267012 = CARTESIAN_POINT('',(174.19165,-78.8231,1.51)); +#267013 = DIRECTION('',(-0.,0.,-1.)); +#267014 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#267015 = FACE_BOUND('',#267016,.T.); +#267016 = EDGE_LOOP('',(#267017)); +#267017 = ORIENTED_EDGE('',*,*,#267018,.T.); +#267018 = EDGE_CURVE('',#267019,#267019,#267021,.T.); +#267019 = VERTEX_POINT('',#267020); +#267020 = CARTESIAN_POINT('',(174.19165,-77.2231,1.51)); +#267021 = CIRCLE('',#267022,0.4); +#267022 = AXIS2_PLACEMENT_3D('',#267023,#267024,#267025); +#267023 = CARTESIAN_POINT('',(174.19165,-76.8231,1.51)); +#267024 = DIRECTION('',(-0.,0.,-1.)); +#267025 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#267026 = FACE_BOUND('',#267027,.T.); +#267027 = EDGE_LOOP('',(#267028)); +#267028 = ORIENTED_EDGE('',*,*,#267029,.T.); +#267029 = EDGE_CURVE('',#267030,#267030,#267032,.T.); +#267030 = VERTEX_POINT('',#267031); +#267031 = CARTESIAN_POINT('',(174.19165,-75.2231,1.51)); +#267032 = CIRCLE('',#267033,0.4); +#267033 = AXIS2_PLACEMENT_3D('',#267034,#267035,#267036); +#267034 = CARTESIAN_POINT('',(174.19165,-74.8231,1.51)); +#267035 = DIRECTION('',(-0.,0.,-1.)); +#267036 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#267037 = FACE_BOUND('',#267038,.T.); +#267038 = EDGE_LOOP('',(#267039)); +#267039 = ORIENTED_EDGE('',*,*,#267040,.T.); +#267040 = EDGE_CURVE('',#267041,#267041,#267043,.T.); +#267041 = VERTEX_POINT('',#267042); +#267042 = CARTESIAN_POINT('',(196.54165,-91.2231,1.51)); +#267043 = CIRCLE('',#267044,0.4); +#267044 = AXIS2_PLACEMENT_3D('',#267045,#267046,#267047); +#267045 = CARTESIAN_POINT('',(196.54165,-90.8231,1.51)); +#267046 = DIRECTION('',(-0.,0.,-1.)); +#267047 = DIRECTION('',(-0.,-1.,0.)); +#267048 = FACE_BOUND('',#267049,.T.); +#267049 = EDGE_LOOP('',(#267050)); +#267050 = ORIENTED_EDGE('',*,*,#267051,.T.); +#267051 = EDGE_CURVE('',#267052,#267052,#267054,.T.); +#267052 = VERTEX_POINT('',#267053); +#267053 = CARTESIAN_POINT('',(196.54165,-89.2231,1.51)); +#267054 = CIRCLE('',#267055,0.4); +#267055 = AXIS2_PLACEMENT_3D('',#267056,#267057,#267058); +#267056 = CARTESIAN_POINT('',(196.54165,-88.8231,1.51)); +#267057 = DIRECTION('',(-0.,0.,-1.)); +#267058 = DIRECTION('',(-0.,-1.,0.)); +#267059 = FACE_BOUND('',#267060,.T.); +#267060 = EDGE_LOOP('',(#267061)); +#267061 = ORIENTED_EDGE('',*,*,#267062,.T.); +#267062 = EDGE_CURVE('',#267063,#267063,#267065,.T.); +#267063 = VERTEX_POINT('',#267064); +#267064 = CARTESIAN_POINT('',(196.54165,-87.2231,1.51)); +#267065 = CIRCLE('',#267066,0.4); +#267066 = AXIS2_PLACEMENT_3D('',#267067,#267068,#267069); +#267067 = CARTESIAN_POINT('',(196.54165,-86.8231,1.51)); +#267068 = DIRECTION('',(-0.,0.,-1.)); +#267069 = DIRECTION('',(-0.,-1.,0.)); +#267070 = FACE_BOUND('',#267071,.T.); +#267071 = EDGE_LOOP('',(#267072)); +#267072 = ORIENTED_EDGE('',*,*,#267073,.T.); +#267073 = EDGE_CURVE('',#267074,#267074,#267076,.T.); +#267074 = VERTEX_POINT('',#267075); +#267075 = CARTESIAN_POINT('',(196.54165,-85.2231,1.51)); +#267076 = CIRCLE('',#267077,0.4); +#267077 = AXIS2_PLACEMENT_3D('',#267078,#267079,#267080); +#267078 = CARTESIAN_POINT('',(196.54165,-84.8231,1.51)); +#267079 = DIRECTION('',(-0.,0.,-1.)); +#267080 = DIRECTION('',(-0.,-1.,0.)); +#267081 = FACE_BOUND('',#267082,.T.); +#267082 = EDGE_LOOP('',(#267083)); +#267083 = ORIENTED_EDGE('',*,*,#267084,.T.); +#267084 = EDGE_CURVE('',#267085,#267085,#267087,.T.); +#267085 = VERTEX_POINT('',#267086); +#267086 = CARTESIAN_POINT('',(196.54165,-83.2231,1.51)); +#267087 = CIRCLE('',#267088,0.4); +#267088 = AXIS2_PLACEMENT_3D('',#267089,#267090,#267091); +#267089 = CARTESIAN_POINT('',(196.54165,-82.8231,1.51)); +#267090 = DIRECTION('',(-0.,0.,-1.)); +#267091 = DIRECTION('',(-0.,-1.,0.)); +#267092 = FACE_BOUND('',#267093,.T.); +#267093 = EDGE_LOOP('',(#267094)); +#267094 = ORIENTED_EDGE('',*,*,#267095,.T.); +#267095 = EDGE_CURVE('',#267096,#267096,#267098,.T.); +#267096 = VERTEX_POINT('',#267097); +#267097 = CARTESIAN_POINT('',(196.54165,-81.2231,1.51)); +#267098 = CIRCLE('',#267099,0.4); +#267099 = AXIS2_PLACEMENT_3D('',#267100,#267101,#267102); +#267100 = CARTESIAN_POINT('',(196.54165,-80.8231,1.51)); +#267101 = DIRECTION('',(-0.,0.,-1.)); +#267102 = DIRECTION('',(-0.,-1.,0.)); +#267103 = FACE_BOUND('',#267104,.T.); +#267104 = EDGE_LOOP('',(#267105)); +#267105 = ORIENTED_EDGE('',*,*,#267106,.T.); +#267106 = EDGE_CURVE('',#267107,#267107,#267109,.T.); +#267107 = VERTEX_POINT('',#267108); +#267108 = CARTESIAN_POINT('',(210.19165,-90.7981,1.51)); +#267109 = CIRCLE('',#267110,0.475); +#267110 = AXIS2_PLACEMENT_3D('',#267111,#267112,#267113); +#267111 = CARTESIAN_POINT('',(210.19165,-90.3231,1.51)); +#267112 = DIRECTION('',(-0.,0.,-1.)); +#267113 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267114 = FACE_BOUND('',#267115,.T.); +#267115 = EDGE_LOOP('',(#267116)); +#267116 = ORIENTED_EDGE('',*,*,#267117,.T.); +#267117 = EDGE_CURVE('',#267118,#267118,#267120,.T.); +#267118 = VERTEX_POINT('',#267119); +#267119 = CARTESIAN_POINT('',(210.19165,-88.2981,1.51)); +#267120 = CIRCLE('',#267121,0.475); +#267121 = AXIS2_PLACEMENT_3D('',#267122,#267123,#267124); +#267122 = CARTESIAN_POINT('',(210.19165,-87.8231,1.51)); +#267123 = DIRECTION('',(-0.,0.,-1.)); +#267124 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267125 = FACE_BOUND('',#267126,.T.); +#267126 = EDGE_LOOP('',(#267127)); +#267127 = ORIENTED_EDGE('',*,*,#267128,.T.); +#267128 = EDGE_CURVE('',#267129,#267129,#267131,.T.); +#267129 = VERTEX_POINT('',#267130); +#267130 = CARTESIAN_POINT('',(210.16665,-80.5731,1.51)); +#267131 = CIRCLE('',#267132,0.5); +#267132 = AXIS2_PLACEMENT_3D('',#267133,#267134,#267135); +#267133 = CARTESIAN_POINT('',(210.16665,-80.0731,1.51)); +#267134 = DIRECTION('',(-0.,0.,-1.)); +#267135 = DIRECTION('',(-0.,-1.,0.)); +#267136 = FACE_BOUND('',#267137,.T.); +#267137 = EDGE_LOOP('',(#267138)); +#267138 = ORIENTED_EDGE('',*,*,#267139,.T.); +#267139 = EDGE_CURVE('',#267140,#267140,#267142,.T.); +#267140 = VERTEX_POINT('',#267141); +#267141 = CARTESIAN_POINT('',(196.54165,-79.2231,1.51)); +#267142 = CIRCLE('',#267143,0.4); +#267143 = AXIS2_PLACEMENT_3D('',#267144,#267145,#267146); +#267144 = CARTESIAN_POINT('',(196.54165,-78.8231,1.51)); +#267145 = DIRECTION('',(-0.,0.,-1.)); +#267146 = DIRECTION('',(-0.,-1.,0.)); +#267147 = FACE_BOUND('',#267148,.T.); +#267148 = EDGE_LOOP('',(#267149)); +#267149 = ORIENTED_EDGE('',*,*,#267150,.T.); +#267150 = EDGE_CURVE('',#267151,#267151,#267153,.T.); +#267151 = VERTEX_POINT('',#267152); +#267152 = CARTESIAN_POINT('',(196.54165,-77.2231,1.51)); +#267153 = CIRCLE('',#267154,0.4); +#267154 = AXIS2_PLACEMENT_3D('',#267155,#267156,#267157); +#267155 = CARTESIAN_POINT('',(196.54165,-76.8231,1.51)); +#267156 = DIRECTION('',(-0.,0.,-1.)); +#267157 = DIRECTION('',(-0.,-1.,0.)); +#267158 = FACE_BOUND('',#267159,.T.); +#267159 = EDGE_LOOP('',(#267160)); +#267160 = ORIENTED_EDGE('',*,*,#267161,.T.); +#267161 = EDGE_CURVE('',#267162,#267162,#267164,.T.); +#267162 = VERTEX_POINT('',#267163); +#267163 = CARTESIAN_POINT('',(196.54165,-75.2231,1.51)); +#267164 = CIRCLE('',#267165,0.4); +#267165 = AXIS2_PLACEMENT_3D('',#267166,#267167,#267168); +#267166 = CARTESIAN_POINT('',(196.54165,-74.8231,1.51)); +#267167 = DIRECTION('',(-0.,0.,-1.)); +#267168 = DIRECTION('',(-0.,-1.,0.)); +#267169 = FACE_BOUND('',#267170,.T.); +#267170 = EDGE_LOOP('',(#267171)); +#267171 = ORIENTED_EDGE('',*,*,#267172,.T.); +#267172 = EDGE_CURVE('',#267173,#267173,#267175,.T.); +#267173 = VERTEX_POINT('',#267174); +#267174 = CARTESIAN_POINT('',(210.16665,-78.0731,1.51)); +#267175 = CIRCLE('',#267176,0.5); +#267176 = AXIS2_PLACEMENT_3D('',#267177,#267178,#267179); +#267177 = CARTESIAN_POINT('',(210.16665,-77.5731,1.51)); +#267178 = DIRECTION('',(-0.,0.,-1.)); +#267179 = DIRECTION('',(-0.,-1.,0.)); +#267180 = FACE_BOUND('',#267181,.T.); +#267181 = EDGE_LOOP('',(#267182)); +#267182 = ORIENTED_EDGE('',*,*,#267183,.T.); +#267183 = EDGE_CURVE('',#267184,#267184,#267186,.T.); +#267184 = VERTEX_POINT('',#267185); +#267185 = CARTESIAN_POINT('',(210.16665,-71.3231,1.51)); +#267186 = CIRCLE('',#267187,0.5); +#267187 = AXIS2_PLACEMENT_3D('',#267188,#267189,#267190); +#267188 = CARTESIAN_POINT('',(210.16665,-70.8231,1.51)); +#267189 = DIRECTION('',(-0.,0.,-1.)); +#267190 = DIRECTION('',(-0.,-1.,0.)); +#267191 = FACE_BOUND('',#267192,.T.); +#267192 = EDGE_LOOP('',(#267193)); +#267193 = ORIENTED_EDGE('',*,*,#267194,.T.); +#267194 = EDGE_CURVE('',#267195,#267195,#267197,.T.); +#267195 = VERTEX_POINT('',#267196); +#267196 = CARTESIAN_POINT('',(210.16665,-68.8231,1.51)); +#267197 = CIRCLE('',#267198,0.5); +#267198 = AXIS2_PLACEMENT_3D('',#267199,#267200,#267201); +#267199 = CARTESIAN_POINT('',(210.16665,-68.3231,1.51)); +#267200 = DIRECTION('',(-0.,0.,-1.)); +#267201 = DIRECTION('',(-0.,-1.,0.)); +#267202 = FACE_BOUND('',#267203,.T.); +#267203 = EDGE_LOOP('',(#267204)); +#267204 = ORIENTED_EDGE('',*,*,#267205,.T.); +#267205 = EDGE_CURVE('',#267206,#267206,#267208,.T.); +#267206 = VERTEX_POINT('',#267207); +#267207 = CARTESIAN_POINT('',(150.37165,-56.8231,1.51)); +#267208 = CIRCLE('',#267209,0.5); +#267209 = AXIS2_PLACEMENT_3D('',#267210,#267211,#267212); +#267210 = CARTESIAN_POINT('',(150.37165,-56.3231,1.51)); +#267211 = DIRECTION('',(-0.,0.,-1.)); +#267212 = DIRECTION('',(-0.,-1.,0.)); +#267213 = FACE_BOUND('',#267214,.T.); +#267214 = EDGE_LOOP('',(#267215)); +#267215 = ORIENTED_EDGE('',*,*,#267216,.T.); +#267216 = EDGE_CURVE('',#267217,#267217,#267219,.T.); +#267217 = VERTEX_POINT('',#267218); +#267218 = CARTESIAN_POINT('',(152.91165,-56.8231,1.51)); +#267219 = CIRCLE('',#267220,0.5); +#267220 = AXIS2_PLACEMENT_3D('',#267221,#267222,#267223); +#267221 = CARTESIAN_POINT('',(152.91165,-56.3231,1.51)); +#267222 = DIRECTION('',(-0.,0.,-1.)); +#267223 = DIRECTION('',(-0.,-1.,0.)); +#267224 = FACE_BOUND('',#267225,.T.); +#267225 = EDGE_LOOP('',(#267226)); +#267226 = ORIENTED_EDGE('',*,*,#267227,.T.); +#267227 = EDGE_CURVE('',#267228,#267228,#267230,.T.); +#267228 = VERTEX_POINT('',#267229); +#267229 = CARTESIAN_POINT('',(155.45165,-56.8231,1.51)); +#267230 = CIRCLE('',#267231,0.5); +#267231 = AXIS2_PLACEMENT_3D('',#267232,#267233,#267234); +#267232 = CARTESIAN_POINT('',(155.45165,-56.3231,1.51)); +#267233 = DIRECTION('',(-0.,0.,-1.)); +#267234 = DIRECTION('',(-0.,-1.,0.)); +#267235 = FACE_BOUND('',#267236,.T.); +#267236 = EDGE_LOOP('',(#267237)); +#267237 = ORIENTED_EDGE('',*,*,#267238,.T.); +#267238 = EDGE_CURVE('',#267239,#267239,#267241,.T.); +#267239 = VERTEX_POINT('',#267240); +#267240 = CARTESIAN_POINT('',(189.28415,-66.5256,1.51)); +#267241 = CIRCLE('',#267242,0.5); +#267242 = AXIS2_PLACEMENT_3D('',#267243,#267244,#267245); +#267243 = CARTESIAN_POINT('',(189.28415,-66.0256,1.51)); +#267244 = DIRECTION('',(-0.,0.,-1.)); +#267245 = DIRECTION('',(-0.,-1.,0.)); +#267246 = FACE_BOUND('',#267247,.T.); +#267247 = EDGE_LOOP('',(#267248)); +#267248 = ORIENTED_EDGE('',*,*,#267249,.T.); +#267249 = EDGE_CURVE('',#267250,#267250,#267252,.T.); +#267250 = VERTEX_POINT('',#267251); +#267251 = CARTESIAN_POINT('',(194.36415,-66.5256,1.51)); +#267252 = CIRCLE('',#267253,0.5); +#267253 = AXIS2_PLACEMENT_3D('',#267254,#267255,#267256); +#267254 = CARTESIAN_POINT('',(194.36415,-66.0256,1.51)); +#267255 = DIRECTION('',(-0.,0.,-1.)); +#267256 = DIRECTION('',(-0.,-1.,0.)); +#267257 = FACE_BOUND('',#267258,.T.); +#267258 = EDGE_LOOP('',(#267259)); +#267259 = ORIENTED_EDGE('',*,*,#267260,.T.); +#267260 = EDGE_CURVE('',#267261,#267261,#267263,.T.); +#267261 = VERTEX_POINT('',#267262); +#267262 = CARTESIAN_POINT('',(189.28415,-58.9056,1.51)); +#267263 = CIRCLE('',#267264,0.5); +#267264 = AXIS2_PLACEMENT_3D('',#267265,#267266,#267267); +#267265 = CARTESIAN_POINT('',(189.28415,-58.4056,1.51)); +#267266 = DIRECTION('',(-0.,0.,-1.)); +#267267 = DIRECTION('',(-0.,-1.,0.)); +#267268 = FACE_BOUND('',#267269,.T.); +#267269 = EDGE_LOOP('',(#267270)); +#267270 = ORIENTED_EDGE('',*,*,#267271,.T.); +#267271 = EDGE_CURVE('',#267272,#267272,#267274,.T.); +#267272 = VERTEX_POINT('',#267273); +#267273 = CARTESIAN_POINT('',(189.28415,-56.3656,1.51)); +#267274 = CIRCLE('',#267275,0.5); +#267275 = AXIS2_PLACEMENT_3D('',#267276,#267277,#267278); +#267276 = CARTESIAN_POINT('',(189.28415,-55.8656,1.51)); +#267277 = DIRECTION('',(-0.,0.,-1.)); +#267278 = DIRECTION('',(-0.,-1.,0.)); +#267279 = FACE_BOUND('',#267280,.T.); +#267280 = EDGE_LOOP('',(#267281)); +#267281 = ORIENTED_EDGE('',*,*,#267282,.T.); +#267282 = EDGE_CURVE('',#267283,#267283,#267285,.T.); +#267283 = VERTEX_POINT('',#267284); +#267284 = CARTESIAN_POINT('',(194.36415,-58.9056,1.51)); +#267285 = CIRCLE('',#267286,0.5); +#267286 = AXIS2_PLACEMENT_3D('',#267287,#267288,#267289); +#267287 = CARTESIAN_POINT('',(194.36415,-58.4056,1.51)); +#267288 = DIRECTION('',(-0.,0.,-1.)); +#267289 = DIRECTION('',(-0.,-1.,0.)); +#267290 = FACE_BOUND('',#267291,.T.); +#267291 = EDGE_LOOP('',(#267292)); +#267292 = ORIENTED_EDGE('',*,*,#267293,.T.); +#267293 = EDGE_CURVE('',#267294,#267294,#267296,.T.); +#267294 = VERTEX_POINT('',#267295); +#267295 = CARTESIAN_POINT('',(194.36415,-56.3656,1.51)); +#267296 = CIRCLE('',#267297,0.5); +#267297 = AXIS2_PLACEMENT_3D('',#267298,#267299,#267300); +#267298 = CARTESIAN_POINT('',(194.36415,-55.8656,1.51)); +#267299 = DIRECTION('',(-0.,0.,-1.)); +#267300 = DIRECTION('',(-0.,-1.,0.)); +#267301 = FACE_BOUND('',#267302,.T.); +#267302 = EDGE_LOOP('',(#267303)); +#267303 = ORIENTED_EDGE('',*,*,#267304,.T.); +#267304 = EDGE_CURVE('',#267305,#267305,#267307,.T.); +#267305 = VERTEX_POINT('',#267306); +#267306 = CARTESIAN_POINT('',(210.19165,-62.2981,1.51)); +#267307 = CIRCLE('',#267308,0.475); +#267308 = AXIS2_PLACEMENT_3D('',#267309,#267310,#267311); +#267309 = CARTESIAN_POINT('',(210.19165,-61.8231,1.51)); +#267310 = DIRECTION('',(-0.,0.,-1.)); +#267311 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267312 = FACE_BOUND('',#267313,.T.); +#267313 = EDGE_LOOP('',(#267314)); +#267314 = ORIENTED_EDGE('',*,*,#267315,.T.); +#267315 = EDGE_CURVE('',#267316,#267316,#267318,.T.); +#267316 = VERTEX_POINT('',#267317); +#267317 = CARTESIAN_POINT('',(210.19165,-59.7981,1.51)); +#267318 = CIRCLE('',#267319,0.475); +#267319 = AXIS2_PLACEMENT_3D('',#267320,#267321,#267322); +#267320 = CARTESIAN_POINT('',(210.19165,-59.3231,1.51)); +#267321 = DIRECTION('',(-0.,0.,-1.)); +#267322 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267323 = FACE_BOUND('',#267324,.T.); +#267324 = EDGE_LOOP('',(#267325)); +#267325 = ORIENTED_EDGE('',*,*,#267326,.T.); +#267326 = EDGE_CURVE('',#267327,#267327,#267329,.T.); +#267327 = VERTEX_POINT('',#267328); +#267328 = CARTESIAN_POINT('',(210.19165,-57.2981,1.51)); +#267329 = CIRCLE('',#267330,0.475); +#267330 = AXIS2_PLACEMENT_3D('',#267331,#267332,#267333); +#267331 = CARTESIAN_POINT('',(210.19165,-56.8231,1.51)); +#267332 = DIRECTION('',(-0.,0.,-1.)); +#267333 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267334 = FACE_BOUND('',#267335,.T.); +#267335 = EDGE_LOOP('',(#267336)); +#267336 = ORIENTED_EDGE('',*,*,#267337,.T.); +#267337 = EDGE_CURVE('',#267338,#267338,#267340,.T.); +#267338 = VERTEX_POINT('',#267339); +#267339 = CARTESIAN_POINT('',(210.19165,-54.7981,1.51)); +#267340 = CIRCLE('',#267341,0.475); +#267341 = AXIS2_PLACEMENT_3D('',#267342,#267343,#267344); +#267342 = CARTESIAN_POINT('',(210.19165,-54.3231,1.51)); +#267343 = DIRECTION('',(-0.,0.,-1.)); +#267344 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267345 = FACE_BOUND('',#267346,.T.); +#267346 = EDGE_LOOP('',(#267347)); +#267347 = ORIENTED_EDGE('',*,*,#267348,.T.); +#267348 = EDGE_CURVE('',#267349,#267349,#267351,.T.); +#267349 = VERTEX_POINT('',#267350); +#267350 = CARTESIAN_POINT('',(211.19165,-46.9231,1.51)); +#267351 = CIRCLE('',#267352,1.6); +#267352 = AXIS2_PLACEMENT_3D('',#267353,#267354,#267355); +#267353 = CARTESIAN_POINT('',(211.19165,-45.3231,1.51)); +#267354 = DIRECTION('',(-0.,0.,-1.)); +#267355 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#267356 = PLANE('',#267357); +#267357 = AXIS2_PLACEMENT_3D('',#267358,#267359,#267360); +#267358 = CARTESIAN_POINT('',(0.,0.,1.51)); +#267359 = DIRECTION('',(0.,0.,1.)); +#267360 = DIRECTION('',(1.,0.,-0.)); +#267361 = ADVANCED_FACE('',(#267362),#267368,.T.); +#267362 = FACE_BOUND('',#267363,.T.); +#267363 = EDGE_LOOP('',(#267364,#267365,#267366,#267367)); +#267364 = ORIENTED_EDGE('',*,*,#263545,.T.); +#267365 = ORIENTED_EDGE('',*,*,#265468,.T.); +#267366 = ORIENTED_EDGE('',*,*,#263505,.F.); +#267367 = ORIENTED_EDGE('',*,*,#263569,.F.); +#267368 = PLANE('',#267369); +#267369 = AXIS2_PLACEMENT_3D('',#267370,#267371,#267372); +#267370 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#267371 = DIRECTION('',(0.,1.,0.)); +#267372 = DIRECTION('',(1.,0.,0.)); +#267373 = ADVANCED_FACE('',(#267374),#267385,.F.); +#267374 = FACE_BOUND('',#267375,.T.); +#267375 = EDGE_LOOP('',(#267376,#267377,#267383,#267384)); +#267376 = ORIENTED_EDGE('',*,*,#263578,.T.); +#267377 = ORIENTED_EDGE('',*,*,#267378,.T.); +#267378 = EDGE_CURVE('',#263579,#265478,#267379,.T.); +#267379 = LINE('',#267380,#267381); +#267380 = CARTESIAN_POINT('',(85.19165,-136.9231,-4.6E-02)); +#267381 = VECTOR('',#267382,1.); +#267382 = DIRECTION('',(0.,0.,1.)); +#267383 = ORIENTED_EDGE('',*,*,#265477,.F.); +#267384 = ORIENTED_EDGE('',*,*,#267378,.F.); +#267385 = CYLINDRICAL_SURFACE('',#267386,1.6); +#267386 = AXIS2_PLACEMENT_3D('',#267387,#267388,#267389); +#267387 = CARTESIAN_POINT('',(85.19165,-135.3231,-4.6E-02)); +#267388 = DIRECTION('',(-0.,-0.,-1.)); +#267389 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#267390 = ADVANCED_FACE('',(#267391),#267402,.F.); +#267391 = FACE_BOUND('',#267392,.T.); +#267392 = EDGE_LOOP('',(#267393,#267394,#267400,#267401)); +#267393 = ORIENTED_EDGE('',*,*,#263589,.T.); +#267394 = ORIENTED_EDGE('',*,*,#267395,.T.); +#267395 = EDGE_CURVE('',#263590,#265489,#267396,.T.); +#267396 = LINE('',#267397,#267398); +#267397 = CARTESIAN_POINT('',(115.25165,-130.0831,-4.6E-02)); +#267398 = VECTOR('',#267399,1.); +#267399 = DIRECTION('',(0.,0.,1.)); +#267400 = ORIENTED_EDGE('',*,*,#265488,.F.); +#267401 = ORIENTED_EDGE('',*,*,#267395,.F.); +#267402 = CYLINDRICAL_SURFACE('',#267403,0.5); +#267403 = AXIS2_PLACEMENT_3D('',#267404,#267405,#267406); +#267404 = CARTESIAN_POINT('',(115.25165,-129.5831,-4.6E-02)); +#267405 = DIRECTION('',(-0.,-0.,-1.)); +#267406 = DIRECTION('',(-0.,-1.,0.)); +#267407 = ADVANCED_FACE('',(#267408),#267419,.F.); +#267408 = FACE_BOUND('',#267409,.T.); +#267409 = EDGE_LOOP('',(#267410,#267411,#267417,#267418)); +#267410 = ORIENTED_EDGE('',*,*,#263600,.T.); +#267411 = ORIENTED_EDGE('',*,*,#267412,.T.); +#267412 = EDGE_CURVE('',#263601,#265500,#267413,.T.); +#267413 = LINE('',#267414,#267415); +#267414 = CARTESIAN_POINT('',(117.79165,-130.0831,-4.6E-02)); +#267415 = VECTOR('',#267416,1.); +#267416 = DIRECTION('',(0.,0.,1.)); +#267417 = ORIENTED_EDGE('',*,*,#265499,.F.); +#267418 = ORIENTED_EDGE('',*,*,#267412,.F.); +#267419 = CYLINDRICAL_SURFACE('',#267420,0.5); +#267420 = AXIS2_PLACEMENT_3D('',#267421,#267422,#267423); +#267421 = CARTESIAN_POINT('',(117.79165,-129.5831,-4.6E-02)); +#267422 = DIRECTION('',(-0.,-0.,-1.)); +#267423 = DIRECTION('',(-0.,-1.,0.)); +#267424 = ADVANCED_FACE('',(#267425),#267436,.F.); +#267425 = FACE_BOUND('',#267426,.T.); +#267426 = EDGE_LOOP('',(#267427,#267428,#267434,#267435)); +#267427 = ORIENTED_EDGE('',*,*,#263611,.T.); +#267428 = ORIENTED_EDGE('',*,*,#267429,.T.); +#267429 = EDGE_CURVE('',#263612,#265511,#267430,.T.); +#267430 = LINE('',#267431,#267432); +#267431 = CARTESIAN_POINT('',(120.33165,-130.0831,-4.6E-02)); +#267432 = VECTOR('',#267433,1.); +#267433 = DIRECTION('',(0.,0.,1.)); +#267434 = ORIENTED_EDGE('',*,*,#265510,.F.); +#267435 = ORIENTED_EDGE('',*,*,#267429,.F.); +#267436 = CYLINDRICAL_SURFACE('',#267437,0.5); +#267437 = AXIS2_PLACEMENT_3D('',#267438,#267439,#267440); +#267438 = CARTESIAN_POINT('',(120.33165,-129.5831,-4.6E-02)); +#267439 = DIRECTION('',(-0.,-0.,-1.)); +#267440 = DIRECTION('',(-0.,-1.,0.)); +#267441 = ADVANCED_FACE('',(#267442),#267453,.F.); +#267442 = FACE_BOUND('',#267443,.T.); +#267443 = EDGE_LOOP('',(#267444,#267445,#267451,#267452)); +#267444 = ORIENTED_EDGE('',*,*,#263622,.T.); +#267445 = ORIENTED_EDGE('',*,*,#267446,.T.); +#267446 = EDGE_CURVE('',#263623,#265522,#267447,.T.); +#267447 = LINE('',#267448,#267449); +#267448 = CARTESIAN_POINT('',(122.87165,-130.0831,-4.6E-02)); +#267449 = VECTOR('',#267450,1.); +#267450 = DIRECTION('',(0.,0.,1.)); +#267451 = ORIENTED_EDGE('',*,*,#265521,.F.); +#267452 = ORIENTED_EDGE('',*,*,#267446,.F.); +#267453 = CYLINDRICAL_SURFACE('',#267454,0.5); +#267454 = AXIS2_PLACEMENT_3D('',#267455,#267456,#267457); +#267455 = CARTESIAN_POINT('',(122.87165,-129.5831,-4.6E-02)); +#267456 = DIRECTION('',(-0.,-0.,-1.)); +#267457 = DIRECTION('',(-0.,-1.,0.)); +#267458 = ADVANCED_FACE('',(#267459),#267470,.F.); +#267459 = FACE_BOUND('',#267460,.T.); +#267460 = EDGE_LOOP('',(#267461,#267462,#267468,#267469)); +#267461 = ORIENTED_EDGE('',*,*,#263633,.T.); +#267462 = ORIENTED_EDGE('',*,*,#267463,.T.); +#267463 = EDGE_CURVE('',#263634,#265533,#267464,.T.); +#267464 = LINE('',#267465,#267466); +#267465 = CARTESIAN_POINT('',(125.41165,-130.0831,-4.6E-02)); +#267466 = VECTOR('',#267467,1.); +#267467 = DIRECTION('',(0.,0.,1.)); +#267468 = ORIENTED_EDGE('',*,*,#265532,.F.); +#267469 = ORIENTED_EDGE('',*,*,#267463,.F.); +#267470 = CYLINDRICAL_SURFACE('',#267471,0.5); +#267471 = AXIS2_PLACEMENT_3D('',#267472,#267473,#267474); +#267472 = CARTESIAN_POINT('',(125.41165,-129.5831,-4.6E-02)); +#267473 = DIRECTION('',(-0.,-0.,-1.)); +#267474 = DIRECTION('',(-0.,-1.,0.)); +#267475 = ADVANCED_FACE('',(#267476),#267487,.F.); +#267476 = FACE_BOUND('',#267477,.T.); +#267477 = EDGE_LOOP('',(#267478,#267479,#267485,#267486)); +#267478 = ORIENTED_EDGE('',*,*,#263644,.T.); +#267479 = ORIENTED_EDGE('',*,*,#267480,.T.); +#267480 = EDGE_CURVE('',#263645,#265544,#267481,.T.); +#267481 = LINE('',#267482,#267483); +#267482 = CARTESIAN_POINT('',(127.95165,-130.0831,-4.6E-02)); +#267483 = VECTOR('',#267484,1.); +#267484 = DIRECTION('',(0.,0.,1.)); +#267485 = ORIENTED_EDGE('',*,*,#265543,.F.); +#267486 = ORIENTED_EDGE('',*,*,#267480,.F.); +#267487 = CYLINDRICAL_SURFACE('',#267488,0.5); +#267488 = AXIS2_PLACEMENT_3D('',#267489,#267490,#267491); +#267489 = CARTESIAN_POINT('',(127.95165,-129.5831,-4.6E-02)); +#267490 = DIRECTION('',(-0.,-0.,-1.)); +#267491 = DIRECTION('',(-0.,-1.,0.)); +#267492 = ADVANCED_FACE('',(#267493),#267504,.F.); +#267493 = FACE_BOUND('',#267494,.T.); +#267494 = EDGE_LOOP('',(#267495,#267496,#267502,#267503)); +#267495 = ORIENTED_EDGE('',*,*,#263655,.T.); +#267496 = ORIENTED_EDGE('',*,*,#267497,.T.); +#267497 = EDGE_CURVE('',#263656,#265555,#267498,.T.); +#267498 = LINE('',#267499,#267500); +#267499 = CARTESIAN_POINT('',(130.49165,-130.0831,-4.6E-02)); +#267500 = VECTOR('',#267501,1.); +#267501 = DIRECTION('',(0.,0.,1.)); +#267502 = ORIENTED_EDGE('',*,*,#265554,.F.); +#267503 = ORIENTED_EDGE('',*,*,#267497,.F.); +#267504 = CYLINDRICAL_SURFACE('',#267505,0.5); +#267505 = AXIS2_PLACEMENT_3D('',#267506,#267507,#267508); +#267506 = CARTESIAN_POINT('',(130.49165,-129.5831,-4.6E-02)); +#267507 = DIRECTION('',(-0.,-0.,-1.)); +#267508 = DIRECTION('',(-0.,-1.,0.)); +#267509 = ADVANCED_FACE('',(#267510),#267521,.F.); +#267510 = FACE_BOUND('',#267511,.T.); +#267511 = EDGE_LOOP('',(#267512,#267513,#267519,#267520)); +#267512 = ORIENTED_EDGE('',*,*,#263666,.T.); +#267513 = ORIENTED_EDGE('',*,*,#267514,.T.); +#267514 = EDGE_CURVE('',#263667,#265566,#267515,.T.); +#267515 = LINE('',#267516,#267517); +#267516 = CARTESIAN_POINT('',(133.03165,-130.0831,-4.6E-02)); +#267517 = VECTOR('',#267518,1.); +#267518 = DIRECTION('',(0.,0.,1.)); +#267519 = ORIENTED_EDGE('',*,*,#265565,.F.); +#267520 = ORIENTED_EDGE('',*,*,#267514,.F.); +#267521 = CYLINDRICAL_SURFACE('',#267522,0.5); +#267522 = AXIS2_PLACEMENT_3D('',#267523,#267524,#267525); +#267523 = CARTESIAN_POINT('',(133.03165,-129.5831,-4.6E-02)); +#267524 = DIRECTION('',(-0.,-0.,-1.)); +#267525 = DIRECTION('',(-0.,-1.,0.)); +#267526 = ADVANCED_FACE('',(#267527),#267538,.F.); +#267527 = FACE_BOUND('',#267528,.T.); +#267528 = EDGE_LOOP('',(#267529,#267530,#267536,#267537)); +#267529 = ORIENTED_EDGE('',*,*,#263677,.T.); +#267530 = ORIENTED_EDGE('',*,*,#267531,.T.); +#267531 = EDGE_CURVE('',#263678,#265577,#267532,.T.); +#267532 = LINE('',#267533,#267534); +#267533 = CARTESIAN_POINT('',(138.11165,-130.0831,-4.6E-02)); +#267534 = VECTOR('',#267535,1.); +#267535 = DIRECTION('',(0.,0.,1.)); +#267536 = ORIENTED_EDGE('',*,*,#265576,.F.); +#267537 = ORIENTED_EDGE('',*,*,#267531,.F.); +#267538 = CYLINDRICAL_SURFACE('',#267539,0.5); +#267539 = AXIS2_PLACEMENT_3D('',#267540,#267541,#267542); +#267540 = CARTESIAN_POINT('',(138.11165,-129.5831,-4.6E-02)); +#267541 = DIRECTION('',(-0.,-0.,-1.)); +#267542 = DIRECTION('',(-0.,-1.,0.)); +#267543 = ADVANCED_FACE('',(#267544),#267555,.F.); +#267544 = FACE_BOUND('',#267545,.T.); +#267545 = EDGE_LOOP('',(#267546,#267547,#267553,#267554)); +#267546 = ORIENTED_EDGE('',*,*,#263688,.T.); +#267547 = ORIENTED_EDGE('',*,*,#267548,.T.); +#267548 = EDGE_CURVE('',#263689,#265588,#267549,.T.); +#267549 = LINE('',#267550,#267551); +#267550 = CARTESIAN_POINT('',(140.65165,-130.0831,-4.6E-02)); +#267551 = VECTOR('',#267552,1.); +#267552 = DIRECTION('',(0.,0.,1.)); +#267553 = ORIENTED_EDGE('',*,*,#265587,.F.); +#267554 = ORIENTED_EDGE('',*,*,#267548,.F.); +#267555 = CYLINDRICAL_SURFACE('',#267556,0.5); +#267556 = AXIS2_PLACEMENT_3D('',#267557,#267558,#267559); +#267557 = CARTESIAN_POINT('',(140.65165,-129.5831,-4.6E-02)); +#267558 = DIRECTION('',(-0.,-0.,-1.)); +#267559 = DIRECTION('',(-0.,-1.,0.)); +#267560 = ADVANCED_FACE('',(#267561),#267572,.F.); +#267561 = FACE_BOUND('',#267562,.T.); +#267562 = EDGE_LOOP('',(#267563,#267564,#267570,#267571)); +#267563 = ORIENTED_EDGE('',*,*,#263699,.T.); +#267564 = ORIENTED_EDGE('',*,*,#267565,.T.); +#267565 = EDGE_CURVE('',#263700,#265599,#267566,.T.); +#267566 = LINE('',#267567,#267568); +#267567 = CARTESIAN_POINT('',(143.19165,-130.0831,-4.6E-02)); +#267568 = VECTOR('',#267569,1.); +#267569 = DIRECTION('',(0.,0.,1.)); +#267570 = ORIENTED_EDGE('',*,*,#265598,.F.); +#267571 = ORIENTED_EDGE('',*,*,#267565,.F.); +#267572 = CYLINDRICAL_SURFACE('',#267573,0.5); +#267573 = AXIS2_PLACEMENT_3D('',#267574,#267575,#267576); +#267574 = CARTESIAN_POINT('',(143.19165,-129.5831,-4.6E-02)); +#267575 = DIRECTION('',(-0.,-0.,-1.)); +#267576 = DIRECTION('',(-0.,-1.,0.)); +#267577 = ADVANCED_FACE('',(#267578),#267589,.F.); +#267578 = FACE_BOUND('',#267579,.T.); +#267579 = EDGE_LOOP('',(#267580,#267581,#267587,#267588)); +#267580 = ORIENTED_EDGE('',*,*,#263710,.T.); +#267581 = ORIENTED_EDGE('',*,*,#267582,.T.); +#267582 = EDGE_CURVE('',#263711,#265610,#267583,.T.); +#267583 = LINE('',#267584,#267585); +#267584 = CARTESIAN_POINT('',(145.73165,-130.0831,-4.6E-02)); +#267585 = VECTOR('',#267586,1.); +#267586 = DIRECTION('',(0.,0.,1.)); +#267587 = ORIENTED_EDGE('',*,*,#265609,.F.); +#267588 = ORIENTED_EDGE('',*,*,#267582,.F.); +#267589 = CYLINDRICAL_SURFACE('',#267590,0.5); +#267590 = AXIS2_PLACEMENT_3D('',#267591,#267592,#267593); +#267591 = CARTESIAN_POINT('',(145.73165,-129.5831,-4.6E-02)); +#267592 = DIRECTION('',(-0.,-0.,-1.)); +#267593 = DIRECTION('',(-0.,-1.,0.)); +#267594 = ADVANCED_FACE('',(#267595),#267611,.F.); +#267595 = FACE_BOUND('',#267596,.T.); +#267596 = EDGE_LOOP('',(#267597,#267598,#267604,#267605)); +#267597 = ORIENTED_EDGE('',*,*,#263721,.T.); +#267598 = ORIENTED_EDGE('',*,*,#267599,.T.); +#267599 = EDGE_CURVE('',#263724,#265623,#267600,.T.); +#267600 = LINE('',#267601,#267602); +#267601 = CARTESIAN_POINT('',(159.525,-134.185,-4.6E-02)); +#267602 = VECTOR('',#267603,1.); +#267603 = DIRECTION('',(0.,0.,1.)); +#267604 = ORIENTED_EDGE('',*,*,#265620,.F.); +#267605 = ORIENTED_EDGE('',*,*,#267606,.F.); +#267606 = EDGE_CURVE('',#263722,#265621,#267607,.T.); +#267607 = LINE('',#267608,#267609); +#267608 = CARTESIAN_POINT('',(160.125,-134.185,-4.6E-02)); +#267609 = VECTOR('',#267610,1.); +#267610 = DIRECTION('',(0.,0.,1.)); +#267611 = CYLINDRICAL_SURFACE('',#267612,0.3); +#267612 = AXIS2_PLACEMENT_3D('',#267613,#267614,#267615); +#267613 = CARTESIAN_POINT('',(159.825,-134.185,-4.6E-02)); +#267614 = DIRECTION('',(-0.,-0.,-1.)); +#267615 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#267616 = ADVANCED_FACE('',(#267617),#267628,.T.); +#267617 = FACE_BOUND('',#267618,.T.); +#267618 = EDGE_LOOP('',(#267619,#267620,#267621,#267622)); +#267619 = ORIENTED_EDGE('',*,*,#263749,.T.); +#267620 = ORIENTED_EDGE('',*,*,#267606,.T.); +#267621 = ORIENTED_EDGE('',*,*,#265648,.F.); +#267622 = ORIENTED_EDGE('',*,*,#267623,.F.); +#267623 = EDGE_CURVE('',#263741,#265640,#267624,.T.); +#267624 = LINE('',#267625,#267626); +#267625 = CARTESIAN_POINT('',(160.125,-133.385,-4.6E-02)); +#267626 = VECTOR('',#267627,1.); +#267627 = DIRECTION('',(0.,0.,1.)); +#267628 = PLANE('',#267629); +#267629 = AXIS2_PLACEMENT_3D('',#267630,#267631,#267632); +#267630 = CARTESIAN_POINT('',(160.125,-134.185,-4.6E-02)); +#267631 = DIRECTION('',(-1.,0.,0.)); +#267632 = DIRECTION('',(0.,1.,0.)); +#267633 = ADVANCED_FACE('',(#267634),#267645,.F.); +#267634 = FACE_BOUND('',#267635,.T.); +#267635 = EDGE_LOOP('',(#267636,#267637,#267638,#267639)); +#267636 = ORIENTED_EDGE('',*,*,#263740,.T.); +#267637 = ORIENTED_EDGE('',*,*,#267623,.T.); +#267638 = ORIENTED_EDGE('',*,*,#265639,.F.); +#267639 = ORIENTED_EDGE('',*,*,#267640,.F.); +#267640 = EDGE_CURVE('',#263733,#265632,#267641,.T.); +#267641 = LINE('',#267642,#267643); +#267642 = CARTESIAN_POINT('',(159.525,-133.385,-4.6E-02)); +#267643 = VECTOR('',#267644,1.); +#267644 = DIRECTION('',(0.,0.,1.)); +#267645 = CYLINDRICAL_SURFACE('',#267646,0.3); +#267646 = AXIS2_PLACEMENT_3D('',#267647,#267648,#267649); +#267647 = CARTESIAN_POINT('',(159.825,-133.385,-4.6E-02)); +#267648 = DIRECTION('',(-0.,-0.,-1.)); +#267649 = DIRECTION('',(1.,9.473903143469E-14,-0.)); +#267650 = ADVANCED_FACE('',(#267651),#267657,.T.); +#267651 = FACE_BOUND('',#267652,.T.); +#267652 = EDGE_LOOP('',(#267653,#267654,#267655,#267656)); +#267653 = ORIENTED_EDGE('',*,*,#263732,.T.); +#267654 = ORIENTED_EDGE('',*,*,#267640,.T.); +#267655 = ORIENTED_EDGE('',*,*,#265631,.F.); +#267656 = ORIENTED_EDGE('',*,*,#267599,.F.); +#267657 = PLANE('',#267658); +#267658 = AXIS2_PLACEMENT_3D('',#267659,#267660,#267661); +#267659 = CARTESIAN_POINT('',(159.525,-133.385,-4.6E-02)); +#267660 = DIRECTION('',(1.,0.,-0.)); +#267661 = DIRECTION('',(0.,-1.,0.)); +#267662 = ADVANCED_FACE('',(#267663),#267674,.F.); +#267663 = FACE_BOUND('',#267664,.T.); +#267664 = EDGE_LOOP('',(#267665,#267666,#267672,#267673)); +#267665 = ORIENTED_EDGE('',*,*,#263757,.T.); +#267666 = ORIENTED_EDGE('',*,*,#267667,.T.); +#267667 = EDGE_CURVE('',#263758,#265657,#267668,.T.); +#267668 = LINE('',#267669,#267670); +#267669 = CARTESIAN_POINT('',(148.27165,-130.0831,-4.6E-02)); +#267670 = VECTOR('',#267671,1.); +#267671 = DIRECTION('',(0.,0.,1.)); +#267672 = ORIENTED_EDGE('',*,*,#265656,.F.); +#267673 = ORIENTED_EDGE('',*,*,#267667,.F.); +#267674 = CYLINDRICAL_SURFACE('',#267675,0.5); +#267675 = AXIS2_PLACEMENT_3D('',#267676,#267677,#267678); +#267676 = CARTESIAN_POINT('',(148.27165,-129.5831,-4.6E-02)); +#267677 = DIRECTION('',(-0.,-0.,-1.)); +#267678 = DIRECTION('',(-0.,-1.,0.)); +#267679 = ADVANCED_FACE('',(#267680),#267691,.F.); +#267680 = FACE_BOUND('',#267681,.T.); +#267681 = EDGE_LOOP('',(#267682,#267683,#267689,#267690)); +#267682 = ORIENTED_EDGE('',*,*,#263768,.T.); +#267683 = ORIENTED_EDGE('',*,*,#267684,.T.); +#267684 = EDGE_CURVE('',#263769,#265668,#267685,.T.); +#267685 = LINE('',#267686,#267687); +#267686 = CARTESIAN_POINT('',(150.81165,-130.0831,-4.6E-02)); +#267687 = VECTOR('',#267688,1.); +#267688 = DIRECTION('',(0.,0.,1.)); +#267689 = ORIENTED_EDGE('',*,*,#265667,.F.); +#267690 = ORIENTED_EDGE('',*,*,#267684,.F.); +#267691 = CYLINDRICAL_SURFACE('',#267692,0.5); +#267692 = AXIS2_PLACEMENT_3D('',#267693,#267694,#267695); +#267693 = CARTESIAN_POINT('',(150.81165,-129.5831,-4.6E-02)); +#267694 = DIRECTION('',(-0.,-0.,-1.)); +#267695 = DIRECTION('',(-0.,-1.,0.)); +#267696 = ADVANCED_FACE('',(#267697),#267713,.F.); +#267697 = FACE_BOUND('',#267698,.T.); +#267698 = EDGE_LOOP('',(#267699,#267700,#267706,#267707)); +#267699 = ORIENTED_EDGE('',*,*,#263779,.T.); +#267700 = ORIENTED_EDGE('',*,*,#267701,.T.); +#267701 = EDGE_CURVE('',#263782,#265681,#267702,.T.); +#267702 = LINE('',#267703,#267704); +#267703 = CARTESIAN_POINT('',(159.525,-131.155,-4.6E-02)); +#267704 = VECTOR('',#267705,1.); +#267705 = DIRECTION('',(0.,0.,1.)); +#267706 = ORIENTED_EDGE('',*,*,#265678,.F.); +#267707 = ORIENTED_EDGE('',*,*,#267708,.F.); +#267708 = EDGE_CURVE('',#263780,#265679,#267709,.T.); +#267709 = LINE('',#267710,#267711); +#267710 = CARTESIAN_POINT('',(160.125,-131.155,-4.6E-02)); +#267711 = VECTOR('',#267712,1.); +#267712 = DIRECTION('',(0.,0.,1.)); +#267713 = CYLINDRICAL_SURFACE('',#267714,0.3); +#267714 = AXIS2_PLACEMENT_3D('',#267715,#267716,#267717); +#267715 = CARTESIAN_POINT('',(159.825,-131.155,-4.6E-02)); +#267716 = DIRECTION('',(-0.,-0.,-1.)); +#267717 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#267718 = ADVANCED_FACE('',(#267719),#267730,.T.); +#267719 = FACE_BOUND('',#267720,.T.); +#267720 = EDGE_LOOP('',(#267721,#267722,#267723,#267724)); +#267721 = ORIENTED_EDGE('',*,*,#263807,.T.); +#267722 = ORIENTED_EDGE('',*,*,#267708,.T.); +#267723 = ORIENTED_EDGE('',*,*,#265706,.F.); +#267724 = ORIENTED_EDGE('',*,*,#267725,.F.); +#267725 = EDGE_CURVE('',#263799,#265698,#267726,.T.); +#267726 = LINE('',#267727,#267728); +#267727 = CARTESIAN_POINT('',(160.125,-129.655,-4.6E-02)); +#267728 = VECTOR('',#267729,1.); +#267729 = DIRECTION('',(0.,0.,1.)); +#267730 = PLANE('',#267731); +#267731 = AXIS2_PLACEMENT_3D('',#267732,#267733,#267734); +#267732 = CARTESIAN_POINT('',(160.125,-131.155,-4.6E-02)); +#267733 = DIRECTION('',(-1.,0.,0.)); +#267734 = DIRECTION('',(0.,1.,0.)); +#267735 = ADVANCED_FACE('',(#267736),#267747,.F.); +#267736 = FACE_BOUND('',#267737,.T.); +#267737 = EDGE_LOOP('',(#267738,#267739,#267740,#267741)); +#267738 = ORIENTED_EDGE('',*,*,#263798,.T.); +#267739 = ORIENTED_EDGE('',*,*,#267725,.T.); +#267740 = ORIENTED_EDGE('',*,*,#265697,.F.); +#267741 = ORIENTED_EDGE('',*,*,#267742,.F.); +#267742 = EDGE_CURVE('',#263791,#265690,#267743,.T.); +#267743 = LINE('',#267744,#267745); +#267744 = CARTESIAN_POINT('',(159.525,-129.655,-4.6E-02)); +#267745 = VECTOR('',#267746,1.); +#267746 = DIRECTION('',(0.,0.,1.)); +#267747 = CYLINDRICAL_SURFACE('',#267748,0.3); +#267748 = AXIS2_PLACEMENT_3D('',#267749,#267750,#267751); +#267749 = CARTESIAN_POINT('',(159.825,-129.655,-4.6E-02)); +#267750 = DIRECTION('',(-0.,-0.,-1.)); +#267751 = DIRECTION('',(1.,-9.473903143469E-14,0.)); +#267752 = ADVANCED_FACE('',(#267753),#267759,.T.); +#267753 = FACE_BOUND('',#267754,.T.); +#267754 = EDGE_LOOP('',(#267755,#267756,#267757,#267758)); +#267755 = ORIENTED_EDGE('',*,*,#263790,.T.); +#267756 = ORIENTED_EDGE('',*,*,#267742,.T.); +#267757 = ORIENTED_EDGE('',*,*,#265689,.F.); +#267758 = ORIENTED_EDGE('',*,*,#267701,.F.); +#267759 = PLANE('',#267760); +#267760 = AXIS2_PLACEMENT_3D('',#267761,#267762,#267763); +#267761 = CARTESIAN_POINT('',(159.525,-129.655,-4.6E-02)); +#267762 = DIRECTION('',(1.,0.,-0.)); +#267763 = DIRECTION('',(0.,-1.,0.)); +#267764 = ADVANCED_FACE('',(#267765),#267776,.F.); +#267765 = FACE_BOUND('',#267766,.T.); +#267766 = EDGE_LOOP('',(#267767,#267768,#267774,#267775)); +#267767 = ORIENTED_EDGE('',*,*,#263815,.T.); +#267768 = ORIENTED_EDGE('',*,*,#267769,.T.); +#267769 = EDGE_CURVE('',#263816,#265715,#267770,.T.); +#267770 = LINE('',#267771,#267772); +#267771 = CARTESIAN_POINT('',(161.175,-130.975,-4.6E-02)); +#267772 = VECTOR('',#267773,1.); +#267773 = DIRECTION('',(0.,0.,1.)); +#267774 = ORIENTED_EDGE('',*,*,#265714,.F.); +#267775 = ORIENTED_EDGE('',*,*,#267769,.F.); +#267776 = CYLINDRICAL_SURFACE('',#267777,0.2); +#267777 = AXIS2_PLACEMENT_3D('',#267778,#267779,#267780); +#267778 = CARTESIAN_POINT('',(161.175,-130.775,-4.6E-02)); +#267779 = DIRECTION('',(-0.,-0.,-1.)); +#267780 = DIRECTION('',(-0.,-1.,0.)); +#267781 = ADVANCED_FACE('',(#267782),#267793,.F.); +#267782 = FACE_BOUND('',#267783,.T.); +#267783 = EDGE_LOOP('',(#267784,#267785,#267791,#267792)); +#267784 = ORIENTED_EDGE('',*,*,#263826,.T.); +#267785 = ORIENTED_EDGE('',*,*,#267786,.T.); +#267786 = EDGE_CURVE('',#263827,#265726,#267787,.T.); +#267787 = LINE('',#267788,#267789); +#267788 = CARTESIAN_POINT('',(162.025,-130.975,-4.6E-02)); +#267789 = VECTOR('',#267790,1.); +#267790 = DIRECTION('',(0.,0.,1.)); +#267791 = ORIENTED_EDGE('',*,*,#265725,.F.); +#267792 = ORIENTED_EDGE('',*,*,#267786,.F.); +#267793 = CYLINDRICAL_SURFACE('',#267794,0.2); +#267794 = AXIS2_PLACEMENT_3D('',#267795,#267796,#267797); +#267795 = CARTESIAN_POINT('',(162.025,-130.775,-4.6E-02)); +#267796 = DIRECTION('',(-0.,0.,-1.)); +#267797 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#267798 = ADVANCED_FACE('',(#267799),#267810,.F.); +#267799 = FACE_BOUND('',#267800,.T.); +#267800 = EDGE_LOOP('',(#267801,#267802,#267808,#267809)); +#267801 = ORIENTED_EDGE('',*,*,#263837,.T.); +#267802 = ORIENTED_EDGE('',*,*,#267803,.T.); +#267803 = EDGE_CURVE('',#263838,#265737,#267804,.T.); +#267804 = LINE('',#267805,#267806); +#267805 = CARTESIAN_POINT('',(162.875,-130.975,-4.6E-02)); +#267806 = VECTOR('',#267807,1.); +#267807 = DIRECTION('',(0.,0.,1.)); +#267808 = ORIENTED_EDGE('',*,*,#265736,.F.); +#267809 = ORIENTED_EDGE('',*,*,#267803,.F.); +#267810 = CYLINDRICAL_SURFACE('',#267811,0.2); +#267811 = AXIS2_PLACEMENT_3D('',#267812,#267813,#267814); +#267812 = CARTESIAN_POINT('',(162.875,-130.775,-4.6E-02)); +#267813 = DIRECTION('',(-0.,-0.,-1.)); +#267814 = DIRECTION('',(-0.,-1.,0.)); +#267815 = ADVANCED_FACE('',(#267816),#267827,.F.); +#267816 = FACE_BOUND('',#267817,.T.); +#267817 = EDGE_LOOP('',(#267818,#267819,#267825,#267826)); +#267818 = ORIENTED_EDGE('',*,*,#263848,.T.); +#267819 = ORIENTED_EDGE('',*,*,#267820,.T.); +#267820 = EDGE_CURVE('',#263849,#265748,#267821,.T.); +#267821 = LINE('',#267822,#267823); +#267822 = CARTESIAN_POINT('',(163.725,-130.975,-4.6E-02)); +#267823 = VECTOR('',#267824,1.); +#267824 = DIRECTION('',(0.,0.,1.)); +#267825 = ORIENTED_EDGE('',*,*,#265747,.F.); +#267826 = ORIENTED_EDGE('',*,*,#267820,.F.); +#267827 = CYLINDRICAL_SURFACE('',#267828,0.2); +#267828 = AXIS2_PLACEMENT_3D('',#267829,#267830,#267831); +#267829 = CARTESIAN_POINT('',(163.725,-130.775,-4.6E-02)); +#267830 = DIRECTION('',(-0.,-0.,-1.)); +#267831 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#267832 = ADVANCED_FACE('',(#267833),#267844,.F.); +#267833 = FACE_BOUND('',#267834,.T.); +#267834 = EDGE_LOOP('',(#267835,#267836,#267842,#267843)); +#267835 = ORIENTED_EDGE('',*,*,#263859,.T.); +#267836 = ORIENTED_EDGE('',*,*,#267837,.T.); +#267837 = EDGE_CURVE('',#263860,#265759,#267838,.T.); +#267838 = LINE('',#267839,#267840); +#267839 = CARTESIAN_POINT('',(161.175,-129.625,-4.6E-02)); +#267840 = VECTOR('',#267841,1.); +#267841 = DIRECTION('',(0.,0.,1.)); +#267842 = ORIENTED_EDGE('',*,*,#265758,.F.); +#267843 = ORIENTED_EDGE('',*,*,#267837,.F.); +#267844 = CYLINDRICAL_SURFACE('',#267845,0.2); +#267845 = AXIS2_PLACEMENT_3D('',#267846,#267847,#267848); +#267846 = CARTESIAN_POINT('',(161.175,-129.425,-4.6E-02)); +#267847 = DIRECTION('',(-0.,-0.,-1.)); +#267848 = DIRECTION('',(-0.,-1.,0.)); +#267849 = ADVANCED_FACE('',(#267850),#267861,.F.); +#267850 = FACE_BOUND('',#267851,.T.); +#267851 = EDGE_LOOP('',(#267852,#267853,#267859,#267860)); +#267852 = ORIENTED_EDGE('',*,*,#263870,.T.); +#267853 = ORIENTED_EDGE('',*,*,#267854,.T.); +#267854 = EDGE_CURVE('',#263871,#265770,#267855,.T.); +#267855 = LINE('',#267856,#267857); +#267856 = CARTESIAN_POINT('',(162.025,-129.625,-4.6E-02)); +#267857 = VECTOR('',#267858,1.); +#267858 = DIRECTION('',(0.,0.,1.)); +#267859 = ORIENTED_EDGE('',*,*,#265769,.F.); +#267860 = ORIENTED_EDGE('',*,*,#267854,.F.); +#267861 = CYLINDRICAL_SURFACE('',#267862,0.2); +#267862 = AXIS2_PLACEMENT_3D('',#267863,#267864,#267865); +#267863 = CARTESIAN_POINT('',(162.025,-129.425,-4.6E-02)); +#267864 = DIRECTION('',(-0.,0.,-1.)); +#267865 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#267866 = ADVANCED_FACE('',(#267867),#267878,.F.); +#267867 = FACE_BOUND('',#267868,.T.); +#267868 = EDGE_LOOP('',(#267869,#267870,#267876,#267877)); +#267869 = ORIENTED_EDGE('',*,*,#263881,.T.); +#267870 = ORIENTED_EDGE('',*,*,#267871,.T.); +#267871 = EDGE_CURVE('',#263882,#265781,#267872,.T.); +#267872 = LINE('',#267873,#267874); +#267873 = CARTESIAN_POINT('',(162.875,-129.625,-4.6E-02)); +#267874 = VECTOR('',#267875,1.); +#267875 = DIRECTION('',(0.,0.,1.)); +#267876 = ORIENTED_EDGE('',*,*,#265780,.F.); +#267877 = ORIENTED_EDGE('',*,*,#267871,.F.); +#267878 = CYLINDRICAL_SURFACE('',#267879,0.2); +#267879 = AXIS2_PLACEMENT_3D('',#267880,#267881,#267882); +#267880 = CARTESIAN_POINT('',(162.875,-129.425,-4.6E-02)); +#267881 = DIRECTION('',(-0.,-0.,-1.)); +#267882 = DIRECTION('',(-0.,-1.,0.)); +#267883 = ADVANCED_FACE('',(#267884),#267895,.F.); +#267884 = FACE_BOUND('',#267885,.T.); +#267885 = EDGE_LOOP('',(#267886,#267887,#267893,#267894)); +#267886 = ORIENTED_EDGE('',*,*,#263892,.T.); +#267887 = ORIENTED_EDGE('',*,*,#267888,.T.); +#267888 = EDGE_CURVE('',#263893,#265792,#267889,.T.); +#267889 = LINE('',#267890,#267891); +#267890 = CARTESIAN_POINT('',(163.725,-129.625,-4.6E-02)); +#267891 = VECTOR('',#267892,1.); +#267892 = DIRECTION('',(0.,0.,1.)); +#267893 = ORIENTED_EDGE('',*,*,#265791,.F.); +#267894 = ORIENTED_EDGE('',*,*,#267888,.F.); +#267895 = CYLINDRICAL_SURFACE('',#267896,0.2); +#267896 = AXIS2_PLACEMENT_3D('',#267897,#267898,#267899); +#267897 = CARTESIAN_POINT('',(163.725,-129.425,-4.6E-02)); +#267898 = DIRECTION('',(-0.,-0.,-1.)); +#267899 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#267900 = ADVANCED_FACE('',(#267901),#267917,.F.); +#267901 = FACE_BOUND('',#267902,.T.); +#267902 = EDGE_LOOP('',(#267903,#267904,#267910,#267911)); +#267903 = ORIENTED_EDGE('',*,*,#263903,.T.); +#267904 = ORIENTED_EDGE('',*,*,#267905,.T.); +#267905 = EDGE_CURVE('',#263906,#265805,#267906,.T.); +#267906 = LINE('',#267907,#267908); +#267907 = CARTESIAN_POINT('',(168.175,-134.185,-4.6E-02)); +#267908 = VECTOR('',#267909,1.); +#267909 = DIRECTION('',(0.,0.,1.)); +#267910 = ORIENTED_EDGE('',*,*,#265802,.F.); +#267911 = ORIENTED_EDGE('',*,*,#267912,.F.); +#267912 = EDGE_CURVE('',#263904,#265803,#267913,.T.); +#267913 = LINE('',#267914,#267915); +#267914 = CARTESIAN_POINT('',(168.775,-134.185,-4.6E-02)); +#267915 = VECTOR('',#267916,1.); +#267916 = DIRECTION('',(0.,0.,1.)); +#267917 = CYLINDRICAL_SURFACE('',#267918,0.3); +#267918 = AXIS2_PLACEMENT_3D('',#267919,#267920,#267921); +#267919 = CARTESIAN_POINT('',(168.475,-134.185,-4.6E-02)); +#267920 = DIRECTION('',(-0.,-0.,-1.)); +#267921 = DIRECTION('',(-1.,0.,-0.)); +#267922 = ADVANCED_FACE('',(#267923),#267934,.T.); +#267923 = FACE_BOUND('',#267924,.T.); +#267924 = EDGE_LOOP('',(#267925,#267926,#267927,#267928)); +#267925 = ORIENTED_EDGE('',*,*,#263931,.T.); +#267926 = ORIENTED_EDGE('',*,*,#267912,.T.); +#267927 = ORIENTED_EDGE('',*,*,#265830,.F.); +#267928 = ORIENTED_EDGE('',*,*,#267929,.F.); +#267929 = EDGE_CURVE('',#263923,#265822,#267930,.T.); +#267930 = LINE('',#267931,#267932); +#267931 = CARTESIAN_POINT('',(168.775,-133.385,-4.6E-02)); +#267932 = VECTOR('',#267933,1.); +#267933 = DIRECTION('',(0.,0.,1.)); +#267934 = PLANE('',#267935); +#267935 = AXIS2_PLACEMENT_3D('',#267936,#267937,#267938); +#267936 = CARTESIAN_POINT('',(168.775,-134.185,-4.6E-02)); +#267937 = DIRECTION('',(-1.,0.,0.)); +#267938 = DIRECTION('',(0.,1.,0.)); +#267939 = ADVANCED_FACE('',(#267940),#267951,.F.); +#267940 = FACE_BOUND('',#267941,.T.); +#267941 = EDGE_LOOP('',(#267942,#267943,#267944,#267945)); +#267942 = ORIENTED_EDGE('',*,*,#263922,.T.); +#267943 = ORIENTED_EDGE('',*,*,#267929,.T.); +#267944 = ORIENTED_EDGE('',*,*,#265821,.F.); +#267945 = ORIENTED_EDGE('',*,*,#267946,.F.); +#267946 = EDGE_CURVE('',#263915,#265814,#267947,.T.); +#267947 = LINE('',#267948,#267949); +#267948 = CARTESIAN_POINT('',(168.175,-133.385,-4.6E-02)); +#267949 = VECTOR('',#267950,1.); +#267950 = DIRECTION('',(0.,0.,1.)); +#267951 = CYLINDRICAL_SURFACE('',#267952,0.3); +#267952 = AXIS2_PLACEMENT_3D('',#267953,#267954,#267955); +#267953 = CARTESIAN_POINT('',(168.475,-133.385,-4.6E-02)); +#267954 = DIRECTION('',(-0.,-0.,-1.)); +#267955 = DIRECTION('',(1.,9.473903143468E-14,-0.)); +#267956 = ADVANCED_FACE('',(#267957),#267963,.T.); +#267957 = FACE_BOUND('',#267958,.T.); +#267958 = EDGE_LOOP('',(#267959,#267960,#267961,#267962)); +#267959 = ORIENTED_EDGE('',*,*,#263914,.T.); +#267960 = ORIENTED_EDGE('',*,*,#267946,.T.); +#267961 = ORIENTED_EDGE('',*,*,#265813,.F.); +#267962 = ORIENTED_EDGE('',*,*,#267905,.F.); +#267963 = PLANE('',#267964); +#267964 = AXIS2_PLACEMENT_3D('',#267965,#267966,#267967); +#267965 = CARTESIAN_POINT('',(168.175,-133.385,-4.6E-02)); +#267966 = DIRECTION('',(1.,0.,-0.)); +#267967 = DIRECTION('',(0.,-1.,0.)); +#267968 = ADVANCED_FACE('',(#267969),#267980,.F.); +#267969 = FACE_BOUND('',#267970,.T.); +#267970 = EDGE_LOOP('',(#267971,#267972,#267978,#267979)); +#267971 = ORIENTED_EDGE('',*,*,#263939,.T.); +#267972 = ORIENTED_EDGE('',*,*,#267973,.T.); +#267973 = EDGE_CURVE('',#263940,#265839,#267974,.T.); +#267974 = LINE('',#267975,#267976); +#267975 = CARTESIAN_POINT('',(172.69165,-134.4731,-4.6E-02)); +#267976 = VECTOR('',#267977,1.); +#267977 = DIRECTION('',(0.,0.,1.)); +#267978 = ORIENTED_EDGE('',*,*,#265838,.F.); +#267979 = ORIENTED_EDGE('',*,*,#267973,.F.); +#267980 = CYLINDRICAL_SURFACE('',#267981,0.65); +#267981 = AXIS2_PLACEMENT_3D('',#267982,#267983,#267984); +#267982 = CARTESIAN_POINT('',(172.69165,-133.8231,-4.6E-02)); +#267983 = DIRECTION('',(-0.,0.,-1.)); +#267984 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#267985 = ADVANCED_FACE('',(#267986),#267997,.F.); +#267986 = FACE_BOUND('',#267987,.T.); +#267987 = EDGE_LOOP('',(#267988,#267989,#267995,#267996)); +#267988 = ORIENTED_EDGE('',*,*,#263950,.T.); +#267989 = ORIENTED_EDGE('',*,*,#267990,.T.); +#267990 = EDGE_CURVE('',#263951,#265850,#267991,.T.); +#267991 = LINE('',#267992,#267993); +#267992 = CARTESIAN_POINT('',(177.69165,-134.4731,-4.6E-02)); +#267993 = VECTOR('',#267994,1.); +#267994 = DIRECTION('',(0.,0.,1.)); +#267995 = ORIENTED_EDGE('',*,*,#265849,.F.); +#267996 = ORIENTED_EDGE('',*,*,#267990,.F.); +#267997 = CYLINDRICAL_SURFACE('',#267998,0.65); +#267998 = AXIS2_PLACEMENT_3D('',#267999,#268000,#268001); +#267999 = CARTESIAN_POINT('',(177.69165,-133.8231,-4.6E-02)); +#268000 = DIRECTION('',(-0.,0.,-1.)); +#268001 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268002 = ADVANCED_FACE('',(#268003),#268014,.F.); +#268003 = FACE_BOUND('',#268004,.T.); +#268004 = EDGE_LOOP('',(#268005,#268006,#268012,#268013)); +#268005 = ORIENTED_EDGE('',*,*,#263961,.T.); +#268006 = ORIENTED_EDGE('',*,*,#268007,.T.); +#268007 = EDGE_CURVE('',#263962,#265861,#268008,.T.); +#268008 = LINE('',#268009,#268010); +#268009 = CARTESIAN_POINT('',(164.575,-130.975,-4.6E-02)); +#268010 = VECTOR('',#268011,1.); +#268011 = DIRECTION('',(0.,0.,1.)); +#268012 = ORIENTED_EDGE('',*,*,#265860,.F.); +#268013 = ORIENTED_EDGE('',*,*,#268007,.F.); +#268014 = CYLINDRICAL_SURFACE('',#268015,0.2); +#268015 = AXIS2_PLACEMENT_3D('',#268016,#268017,#268018); +#268016 = CARTESIAN_POINT('',(164.575,-130.775,-4.6E-02)); +#268017 = DIRECTION('',(-0.,-0.,-1.)); +#268018 = DIRECTION('',(-0.,-1.,0.)); +#268019 = ADVANCED_FACE('',(#268020),#268031,.F.); +#268020 = FACE_BOUND('',#268021,.T.); +#268021 = EDGE_LOOP('',(#268022,#268023,#268029,#268030)); +#268022 = ORIENTED_EDGE('',*,*,#263972,.T.); +#268023 = ORIENTED_EDGE('',*,*,#268024,.T.); +#268024 = EDGE_CURVE('',#263973,#265872,#268025,.T.); +#268025 = LINE('',#268026,#268027); +#268026 = CARTESIAN_POINT('',(165.425,-130.975,-4.6E-02)); +#268027 = VECTOR('',#268028,1.); +#268028 = DIRECTION('',(0.,0.,1.)); +#268029 = ORIENTED_EDGE('',*,*,#265871,.F.); +#268030 = ORIENTED_EDGE('',*,*,#268024,.F.); +#268031 = CYLINDRICAL_SURFACE('',#268032,0.2); +#268032 = AXIS2_PLACEMENT_3D('',#268033,#268034,#268035); +#268033 = CARTESIAN_POINT('',(165.425,-130.775,-4.6E-02)); +#268034 = DIRECTION('',(-0.,-0.,-1.)); +#268035 = DIRECTION('',(-0.,-1.,0.)); +#268036 = ADVANCED_FACE('',(#268037),#268048,.F.); +#268037 = FACE_BOUND('',#268038,.T.); +#268038 = EDGE_LOOP('',(#268039,#268040,#268046,#268047)); +#268039 = ORIENTED_EDGE('',*,*,#263983,.T.); +#268040 = ORIENTED_EDGE('',*,*,#268041,.T.); +#268041 = EDGE_CURVE('',#263984,#265883,#268042,.T.); +#268042 = LINE('',#268043,#268044); +#268043 = CARTESIAN_POINT('',(166.275,-130.975,-4.6E-02)); +#268044 = VECTOR('',#268045,1.); +#268045 = DIRECTION('',(0.,0.,1.)); +#268046 = ORIENTED_EDGE('',*,*,#265882,.F.); +#268047 = ORIENTED_EDGE('',*,*,#268041,.F.); +#268048 = CYLINDRICAL_SURFACE('',#268049,0.2); +#268049 = AXIS2_PLACEMENT_3D('',#268050,#268051,#268052); +#268050 = CARTESIAN_POINT('',(166.275,-130.775,-4.6E-02)); +#268051 = DIRECTION('',(-0.,0.,-1.)); +#268052 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#268053 = ADVANCED_FACE('',(#268054),#268065,.F.); +#268054 = FACE_BOUND('',#268055,.T.); +#268055 = EDGE_LOOP('',(#268056,#268057,#268063,#268064)); +#268056 = ORIENTED_EDGE('',*,*,#263994,.T.); +#268057 = ORIENTED_EDGE('',*,*,#268058,.T.); +#268058 = EDGE_CURVE('',#263995,#265894,#268059,.T.); +#268059 = LINE('',#268060,#268061); +#268060 = CARTESIAN_POINT('',(167.125,-130.975,-4.6E-02)); +#268061 = VECTOR('',#268062,1.); +#268062 = DIRECTION('',(0.,0.,1.)); +#268063 = ORIENTED_EDGE('',*,*,#265893,.F.); +#268064 = ORIENTED_EDGE('',*,*,#268058,.F.); +#268065 = CYLINDRICAL_SURFACE('',#268066,0.2); +#268066 = AXIS2_PLACEMENT_3D('',#268067,#268068,#268069); +#268067 = CARTESIAN_POINT('',(167.125,-130.775,-4.6E-02)); +#268068 = DIRECTION('',(-0.,-0.,-1.)); +#268069 = DIRECTION('',(-0.,-1.,0.)); +#268070 = ADVANCED_FACE('',(#268071),#268087,.F.); +#268071 = FACE_BOUND('',#268072,.T.); +#268072 = EDGE_LOOP('',(#268073,#268074,#268080,#268081)); +#268073 = ORIENTED_EDGE('',*,*,#264005,.T.); +#268074 = ORIENTED_EDGE('',*,*,#268075,.T.); +#268075 = EDGE_CURVE('',#264008,#265907,#268076,.T.); +#268076 = LINE('',#268077,#268078); +#268077 = CARTESIAN_POINT('',(168.175,-131.155,-4.6E-02)); +#268078 = VECTOR('',#268079,1.); +#268079 = DIRECTION('',(0.,0.,1.)); +#268080 = ORIENTED_EDGE('',*,*,#265904,.F.); +#268081 = ORIENTED_EDGE('',*,*,#268082,.F.); +#268082 = EDGE_CURVE('',#264006,#265905,#268083,.T.); +#268083 = LINE('',#268084,#268085); +#268084 = CARTESIAN_POINT('',(168.775,-131.155,-4.6E-02)); +#268085 = VECTOR('',#268086,1.); +#268086 = DIRECTION('',(0.,0.,1.)); +#268087 = CYLINDRICAL_SURFACE('',#268088,0.3); +#268088 = AXIS2_PLACEMENT_3D('',#268089,#268090,#268091); +#268089 = CARTESIAN_POINT('',(168.475,-131.155,-4.6E-02)); +#268090 = DIRECTION('',(-0.,-0.,-1.)); +#268091 = DIRECTION('',(-1.,0.,-0.)); +#268092 = ADVANCED_FACE('',(#268093),#268104,.T.); +#268093 = FACE_BOUND('',#268094,.T.); +#268094 = EDGE_LOOP('',(#268095,#268096,#268097,#268098)); +#268095 = ORIENTED_EDGE('',*,*,#264033,.T.); +#268096 = ORIENTED_EDGE('',*,*,#268082,.T.); +#268097 = ORIENTED_EDGE('',*,*,#265932,.F.); +#268098 = ORIENTED_EDGE('',*,*,#268099,.F.); +#268099 = EDGE_CURVE('',#264025,#265924,#268100,.T.); +#268100 = LINE('',#268101,#268102); +#268101 = CARTESIAN_POINT('',(168.775,-129.655,-4.6E-02)); +#268102 = VECTOR('',#268103,1.); +#268103 = DIRECTION('',(0.,0.,1.)); +#268104 = PLANE('',#268105); +#268105 = AXIS2_PLACEMENT_3D('',#268106,#268107,#268108); +#268106 = CARTESIAN_POINT('',(168.775,-131.155,-4.6E-02)); +#268107 = DIRECTION('',(-1.,0.,0.)); +#268108 = DIRECTION('',(0.,1.,0.)); +#268109 = ADVANCED_FACE('',(#268110),#268121,.F.); +#268110 = FACE_BOUND('',#268111,.T.); +#268111 = EDGE_LOOP('',(#268112,#268113,#268114,#268115)); +#268112 = ORIENTED_EDGE('',*,*,#264024,.T.); +#268113 = ORIENTED_EDGE('',*,*,#268099,.T.); +#268114 = ORIENTED_EDGE('',*,*,#265923,.F.); +#268115 = ORIENTED_EDGE('',*,*,#268116,.F.); +#268116 = EDGE_CURVE('',#264017,#265916,#268117,.T.); +#268117 = LINE('',#268118,#268119); +#268118 = CARTESIAN_POINT('',(168.175,-129.655,-4.6E-02)); +#268119 = VECTOR('',#268120,1.); +#268120 = DIRECTION('',(0.,0.,1.)); +#268121 = CYLINDRICAL_SURFACE('',#268122,0.3); +#268122 = AXIS2_PLACEMENT_3D('',#268123,#268124,#268125); +#268123 = CARTESIAN_POINT('',(168.475,-129.655,-4.6E-02)); +#268124 = DIRECTION('',(-0.,-0.,-1.)); +#268125 = DIRECTION('',(1.,0.,-0.)); +#268126 = ADVANCED_FACE('',(#268127),#268133,.T.); +#268127 = FACE_BOUND('',#268128,.T.); +#268128 = EDGE_LOOP('',(#268129,#268130,#268131,#268132)); +#268129 = ORIENTED_EDGE('',*,*,#264016,.T.); +#268130 = ORIENTED_EDGE('',*,*,#268116,.T.); +#268131 = ORIENTED_EDGE('',*,*,#265915,.F.); +#268132 = ORIENTED_EDGE('',*,*,#268075,.F.); +#268133 = PLANE('',#268134); +#268134 = AXIS2_PLACEMENT_3D('',#268135,#268136,#268137); +#268135 = CARTESIAN_POINT('',(168.175,-129.655,-4.6E-02)); +#268136 = DIRECTION('',(1.,0.,-0.)); +#268137 = DIRECTION('',(0.,-1.,0.)); +#268138 = ADVANCED_FACE('',(#268139),#268150,.F.); +#268139 = FACE_BOUND('',#268140,.T.); +#268140 = EDGE_LOOP('',(#268141,#268142,#268148,#268149)); +#268141 = ORIENTED_EDGE('',*,*,#264041,.T.); +#268142 = ORIENTED_EDGE('',*,*,#268143,.T.); +#268143 = EDGE_CURVE('',#264042,#265941,#268144,.T.); +#268144 = LINE('',#268145,#268146); +#268145 = CARTESIAN_POINT('',(164.575,-129.625,-4.6E-02)); +#268146 = VECTOR('',#268147,1.); +#268147 = DIRECTION('',(0.,0.,1.)); +#268148 = ORIENTED_EDGE('',*,*,#265940,.F.); +#268149 = ORIENTED_EDGE('',*,*,#268143,.F.); +#268150 = CYLINDRICAL_SURFACE('',#268151,0.2); +#268151 = AXIS2_PLACEMENT_3D('',#268152,#268153,#268154); +#268152 = CARTESIAN_POINT('',(164.575,-129.425,-4.6E-02)); +#268153 = DIRECTION('',(-0.,-0.,-1.)); +#268154 = DIRECTION('',(-0.,-1.,0.)); +#268155 = ADVANCED_FACE('',(#268156),#268167,.F.); +#268156 = FACE_BOUND('',#268157,.T.); +#268157 = EDGE_LOOP('',(#268158,#268159,#268165,#268166)); +#268158 = ORIENTED_EDGE('',*,*,#264052,.T.); +#268159 = ORIENTED_EDGE('',*,*,#268160,.T.); +#268160 = EDGE_CURVE('',#264053,#265952,#268161,.T.); +#268161 = LINE('',#268162,#268163); +#268162 = CARTESIAN_POINT('',(165.425,-129.625,-4.6E-02)); +#268163 = VECTOR('',#268164,1.); +#268164 = DIRECTION('',(0.,0.,1.)); +#268165 = ORIENTED_EDGE('',*,*,#265951,.F.); +#268166 = ORIENTED_EDGE('',*,*,#268160,.F.); +#268167 = CYLINDRICAL_SURFACE('',#268168,0.2); +#268168 = AXIS2_PLACEMENT_3D('',#268169,#268170,#268171); +#268169 = CARTESIAN_POINT('',(165.425,-129.425,-4.6E-02)); +#268170 = DIRECTION('',(-0.,-0.,-1.)); +#268171 = DIRECTION('',(-0.,-1.,0.)); +#268172 = ADVANCED_FACE('',(#268173),#268184,.F.); +#268173 = FACE_BOUND('',#268174,.T.); +#268174 = EDGE_LOOP('',(#268175,#268176,#268182,#268183)); +#268175 = ORIENTED_EDGE('',*,*,#264063,.T.); +#268176 = ORIENTED_EDGE('',*,*,#268177,.T.); +#268177 = EDGE_CURVE('',#264064,#265963,#268178,.T.); +#268178 = LINE('',#268179,#268180); +#268179 = CARTESIAN_POINT('',(166.275,-129.625,-4.6E-02)); +#268180 = VECTOR('',#268181,1.); +#268181 = DIRECTION('',(0.,0.,1.)); +#268182 = ORIENTED_EDGE('',*,*,#265962,.F.); +#268183 = ORIENTED_EDGE('',*,*,#268177,.F.); +#268184 = CYLINDRICAL_SURFACE('',#268185,0.2); +#268185 = AXIS2_PLACEMENT_3D('',#268186,#268187,#268188); +#268186 = CARTESIAN_POINT('',(166.275,-129.425,-4.6E-02)); +#268187 = DIRECTION('',(-0.,0.,-1.)); +#268188 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#268189 = ADVANCED_FACE('',(#268190),#268201,.F.); +#268190 = FACE_BOUND('',#268191,.T.); +#268191 = EDGE_LOOP('',(#268192,#268193,#268199,#268200)); +#268192 = ORIENTED_EDGE('',*,*,#264074,.T.); +#268193 = ORIENTED_EDGE('',*,*,#268194,.T.); +#268194 = EDGE_CURVE('',#264075,#265974,#268195,.T.); +#268195 = LINE('',#268196,#268197); +#268196 = CARTESIAN_POINT('',(167.125,-129.625,-4.6E-02)); +#268197 = VECTOR('',#268198,1.); +#268198 = DIRECTION('',(0.,0.,1.)); +#268199 = ORIENTED_EDGE('',*,*,#265973,.F.); +#268200 = ORIENTED_EDGE('',*,*,#268194,.F.); +#268201 = CYLINDRICAL_SURFACE('',#268202,0.2); +#268202 = AXIS2_PLACEMENT_3D('',#268203,#268204,#268205); +#268203 = CARTESIAN_POINT('',(167.125,-129.425,-4.6E-02)); +#268204 = DIRECTION('',(-0.,-0.,-1.)); +#268205 = DIRECTION('',(-0.,-1.,0.)); +#268206 = ADVANCED_FACE('',(#268207),#268218,.F.); +#268207 = FACE_BOUND('',#268208,.T.); +#268208 = EDGE_LOOP('',(#268209,#268210,#268216,#268217)); +#268209 = ORIENTED_EDGE('',*,*,#264085,.T.); +#268210 = ORIENTED_EDGE('',*,*,#268211,.T.); +#268211 = EDGE_CURVE('',#264086,#265985,#268212,.T.); +#268212 = LINE('',#268213,#268214); +#268213 = CARTESIAN_POINT('',(182.69165,-134.4731,-4.6E-02)); +#268214 = VECTOR('',#268215,1.); +#268215 = DIRECTION('',(0.,0.,1.)); +#268216 = ORIENTED_EDGE('',*,*,#265984,.F.); +#268217 = ORIENTED_EDGE('',*,*,#268211,.F.); +#268218 = CYLINDRICAL_SURFACE('',#268219,0.65); +#268219 = AXIS2_PLACEMENT_3D('',#268220,#268221,#268222); +#268220 = CARTESIAN_POINT('',(182.69165,-133.8231,-4.6E-02)); +#268221 = DIRECTION('',(-0.,0.,-1.)); +#268222 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268223 = ADVANCED_FACE('',(#268224),#268235,.F.); +#268224 = FACE_BOUND('',#268225,.T.); +#268225 = EDGE_LOOP('',(#268226,#268227,#268233,#268234)); +#268226 = ORIENTED_EDGE('',*,*,#264096,.T.); +#268227 = ORIENTED_EDGE('',*,*,#268228,.T.); +#268228 = EDGE_CURVE('',#264097,#265996,#268229,.T.); +#268229 = LINE('',#268230,#268231); +#268230 = CARTESIAN_POINT('',(187.69165,-134.4731,-4.6E-02)); +#268231 = VECTOR('',#268232,1.); +#268232 = DIRECTION('',(0.,0.,1.)); +#268233 = ORIENTED_EDGE('',*,*,#265995,.F.); +#268234 = ORIENTED_EDGE('',*,*,#268228,.F.); +#268235 = CYLINDRICAL_SURFACE('',#268236,0.65); +#268236 = AXIS2_PLACEMENT_3D('',#268237,#268238,#268239); +#268237 = CARTESIAN_POINT('',(187.69165,-133.8231,-4.6E-02)); +#268238 = DIRECTION('',(-0.,0.,-1.)); +#268239 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268240 = ADVANCED_FACE('',(#268241),#268252,.F.); +#268241 = FACE_BOUND('',#268242,.T.); +#268242 = EDGE_LOOP('',(#268243,#268244,#268250,#268251)); +#268243 = ORIENTED_EDGE('',*,*,#264107,.T.); +#268244 = ORIENTED_EDGE('',*,*,#268245,.T.); +#268245 = EDGE_CURVE('',#264108,#266007,#268246,.T.); +#268246 = LINE('',#268247,#268248); +#268247 = CARTESIAN_POINT('',(192.69165,-134.4731,-4.6E-02)); +#268248 = VECTOR('',#268249,1.); +#268249 = DIRECTION('',(0.,0.,1.)); +#268250 = ORIENTED_EDGE('',*,*,#266006,.F.); +#268251 = ORIENTED_EDGE('',*,*,#268245,.F.); +#268252 = CYLINDRICAL_SURFACE('',#268253,0.65); +#268253 = AXIS2_PLACEMENT_3D('',#268254,#268255,#268256); +#268254 = CARTESIAN_POINT('',(192.69165,-133.8231,-4.6E-02)); +#268255 = DIRECTION('',(-0.,0.,-1.)); +#268256 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268257 = ADVANCED_FACE('',(#268258),#268269,.F.); +#268258 = FACE_BOUND('',#268259,.T.); +#268259 = EDGE_LOOP('',(#268260,#268261,#268267,#268268)); +#268260 = ORIENTED_EDGE('',*,*,#264118,.T.); +#268261 = ORIENTED_EDGE('',*,*,#268262,.T.); +#268262 = EDGE_CURVE('',#264119,#266018,#268263,.T.); +#268263 = LINE('',#268264,#268265); +#268264 = CARTESIAN_POINT('',(199.19165,-138.3731,-4.6E-02)); +#268265 = VECTOR('',#268266,1.); +#268266 = DIRECTION('',(0.,0.,1.)); +#268267 = ORIENTED_EDGE('',*,*,#266017,.F.); +#268268 = ORIENTED_EDGE('',*,*,#268262,.F.); +#268269 = CYLINDRICAL_SURFACE('',#268270,0.55); +#268270 = AXIS2_PLACEMENT_3D('',#268271,#268272,#268273); +#268271 = CARTESIAN_POINT('',(199.19165,-137.8231,-4.6E-02)); +#268272 = DIRECTION('',(-0.,0.,-1.)); +#268273 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268274 = ADVANCED_FACE('',(#268275),#268286,.F.); +#268275 = FACE_BOUND('',#268276,.T.); +#268276 = EDGE_LOOP('',(#268277,#268278,#268284,#268285)); +#268277 = ORIENTED_EDGE('',*,*,#264129,.T.); +#268278 = ORIENTED_EDGE('',*,*,#268279,.T.); +#268279 = EDGE_CURVE('',#264130,#266029,#268280,.T.); +#268280 = LINE('',#268281,#268282); +#268281 = CARTESIAN_POINT('',(199.19165,-133.8731,-4.6E-02)); +#268282 = VECTOR('',#268283,1.); +#268283 = DIRECTION('',(0.,0.,1.)); +#268284 = ORIENTED_EDGE('',*,*,#266028,.F.); +#268285 = ORIENTED_EDGE('',*,*,#268279,.F.); +#268286 = CYLINDRICAL_SURFACE('',#268287,0.55); +#268287 = AXIS2_PLACEMENT_3D('',#268288,#268289,#268290); +#268288 = CARTESIAN_POINT('',(199.19165,-133.3231,-4.6E-02)); +#268289 = DIRECTION('',(-0.,0.,-1.)); +#268290 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268291 = ADVANCED_FACE('',(#268292),#268303,.F.); +#268292 = FACE_BOUND('',#268293,.T.); +#268293 = EDGE_LOOP('',(#268294,#268295,#268301,#268302)); +#268294 = ORIENTED_EDGE('',*,*,#264140,.T.); +#268295 = ORIENTED_EDGE('',*,*,#268296,.T.); +#268296 = EDGE_CURVE('',#264141,#266040,#268297,.T.); +#268297 = LINE('',#268298,#268299); +#268298 = CARTESIAN_POINT('',(205.69165,-138.3731,-4.6E-02)); +#268299 = VECTOR('',#268300,1.); +#268300 = DIRECTION('',(0.,0.,1.)); +#268301 = ORIENTED_EDGE('',*,*,#266039,.F.); +#268302 = ORIENTED_EDGE('',*,*,#268296,.F.); +#268303 = CYLINDRICAL_SURFACE('',#268304,0.55); +#268304 = AXIS2_PLACEMENT_3D('',#268305,#268306,#268307); +#268305 = CARTESIAN_POINT('',(205.69165,-137.8231,-4.6E-02)); +#268306 = DIRECTION('',(-0.,0.,-1.)); +#268307 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268308 = ADVANCED_FACE('',(#268309),#268320,.F.); +#268309 = FACE_BOUND('',#268310,.T.); +#268310 = EDGE_LOOP('',(#268311,#268312,#268318,#268319)); +#268311 = ORIENTED_EDGE('',*,*,#264151,.T.); +#268312 = ORIENTED_EDGE('',*,*,#268313,.T.); +#268313 = EDGE_CURVE('',#264152,#266051,#268314,.T.); +#268314 = LINE('',#268315,#268316); +#268315 = CARTESIAN_POINT('',(205.69165,-133.8731,-4.6E-02)); +#268316 = VECTOR('',#268317,1.); +#268317 = DIRECTION('',(0.,0.,1.)); +#268318 = ORIENTED_EDGE('',*,*,#266050,.F.); +#268319 = ORIENTED_EDGE('',*,*,#268313,.F.); +#268320 = CYLINDRICAL_SURFACE('',#268321,0.55); +#268321 = AXIS2_PLACEMENT_3D('',#268322,#268323,#268324); +#268322 = CARTESIAN_POINT('',(205.69165,-133.3231,-4.6E-02)); +#268323 = DIRECTION('',(-0.,0.,-1.)); +#268324 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268325 = ADVANCED_FACE('',(#268326),#268337,.F.); +#268326 = FACE_BOUND('',#268327,.T.); +#268327 = EDGE_LOOP('',(#268328,#268329,#268335,#268336)); +#268328 = ORIENTED_EDGE('',*,*,#264162,.T.); +#268329 = ORIENTED_EDGE('',*,*,#268330,.T.); +#268330 = EDGE_CURVE('',#264163,#266062,#268331,.T.); +#268331 = LINE('',#268332,#268333); +#268332 = CARTESIAN_POINT('',(211.19165,-136.9231,-4.6E-02)); +#268333 = VECTOR('',#268334,1.); +#268334 = DIRECTION('',(0.,0.,1.)); +#268335 = ORIENTED_EDGE('',*,*,#266061,.F.); +#268336 = ORIENTED_EDGE('',*,*,#268330,.F.); +#268337 = CYLINDRICAL_SURFACE('',#268338,1.6); +#268338 = AXIS2_PLACEMENT_3D('',#268339,#268340,#268341); +#268339 = CARTESIAN_POINT('',(211.19165,-135.3231,-4.6E-02)); +#268340 = DIRECTION('',(-0.,0.,-1.)); +#268341 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#268342 = ADVANCED_FACE('',(#268343),#268354,.F.); +#268343 = FACE_BOUND('',#268344,.T.); +#268344 = EDGE_LOOP('',(#268345,#268346,#268352,#268353)); +#268345 = ORIENTED_EDGE('',*,*,#264173,.T.); +#268346 = ORIENTED_EDGE('',*,*,#268347,.T.); +#268347 = EDGE_CURVE('',#264174,#266073,#268348,.T.); +#268348 = LINE('',#268349,#268350); +#268349 = CARTESIAN_POINT('',(210.19165,-121.8231,-4.6E-02)); +#268350 = VECTOR('',#268351,1.); +#268351 = DIRECTION('',(0.,0.,1.)); +#268352 = ORIENTED_EDGE('',*,*,#266072,.F.); +#268353 = ORIENTED_EDGE('',*,*,#268347,.F.); +#268354 = CYLINDRICAL_SURFACE('',#268355,0.5); +#268355 = AXIS2_PLACEMENT_3D('',#268356,#268357,#268358); +#268356 = CARTESIAN_POINT('',(210.19165,-121.3231,-4.6E-02)); +#268357 = DIRECTION('',(-0.,-0.,-1.)); +#268358 = DIRECTION('',(-0.,-1.,0.)); +#268359 = ADVANCED_FACE('',(#268360),#268371,.F.); +#268360 = FACE_BOUND('',#268361,.T.); +#268361 = EDGE_LOOP('',(#268362,#268363,#268369,#268370)); +#268362 = ORIENTED_EDGE('',*,*,#264184,.T.); +#268363 = ORIENTED_EDGE('',*,*,#268364,.T.); +#268364 = EDGE_CURVE('',#264185,#266084,#268365,.T.); +#268365 = LINE('',#268366,#268367); +#268366 = CARTESIAN_POINT('',(210.19165,-119.3231,-4.6E-02)); +#268367 = VECTOR('',#268368,1.); +#268368 = DIRECTION('',(0.,0.,1.)); +#268369 = ORIENTED_EDGE('',*,*,#266083,.F.); +#268370 = ORIENTED_EDGE('',*,*,#268364,.F.); +#268371 = CYLINDRICAL_SURFACE('',#268372,0.5); +#268372 = AXIS2_PLACEMENT_3D('',#268373,#268374,#268375); +#268373 = CARTESIAN_POINT('',(210.19165,-118.8231,-4.6E-02)); +#268374 = DIRECTION('',(-0.,-0.,-1.)); +#268375 = DIRECTION('',(-0.,-1.,0.)); +#268376 = ADVANCED_FACE('',(#268377),#268388,.F.); +#268377 = FACE_BOUND('',#268378,.T.); +#268378 = EDGE_LOOP('',(#268379,#268380,#268386,#268387)); +#268379 = ORIENTED_EDGE('',*,*,#264195,.T.); +#268380 = ORIENTED_EDGE('',*,*,#268381,.T.); +#268381 = EDGE_CURVE('',#264196,#266095,#268382,.T.); +#268382 = LINE('',#268383,#268384); +#268383 = CARTESIAN_POINT('',(174.19165,-93.2231,-4.6E-02)); +#268384 = VECTOR('',#268385,1.); +#268385 = DIRECTION('',(0.,0.,1.)); +#268386 = ORIENTED_EDGE('',*,*,#266094,.F.); +#268387 = ORIENTED_EDGE('',*,*,#268381,.F.); +#268388 = CYLINDRICAL_SURFACE('',#268389,0.4); +#268389 = AXIS2_PLACEMENT_3D('',#268390,#268391,#268392); +#268390 = CARTESIAN_POINT('',(174.19165,-92.8231,-4.6E-02)); +#268391 = DIRECTION('',(-0.,0.,-1.)); +#268392 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#268393 = ADVANCED_FACE('',(#268394),#268405,.F.); +#268394 = FACE_BOUND('',#268395,.T.); +#268395 = EDGE_LOOP('',(#268396,#268397,#268403,#268404)); +#268396 = ORIENTED_EDGE('',*,*,#264206,.T.); +#268397 = ORIENTED_EDGE('',*,*,#268398,.T.); +#268398 = EDGE_CURVE('',#264207,#266106,#268399,.T.); +#268399 = LINE('',#268400,#268401); +#268400 = CARTESIAN_POINT('',(210.19165,-108.7981,-4.6E-02)); +#268401 = VECTOR('',#268402,1.); +#268402 = DIRECTION('',(0.,0.,1.)); +#268403 = ORIENTED_EDGE('',*,*,#266105,.F.); +#268404 = ORIENTED_EDGE('',*,*,#268398,.F.); +#268405 = CYLINDRICAL_SURFACE('',#268406,0.475); +#268406 = AXIS2_PLACEMENT_3D('',#268407,#268408,#268409); +#268407 = CARTESIAN_POINT('',(210.19165,-108.3231,-4.6E-02)); +#268408 = DIRECTION('',(-0.,0.,-1.)); +#268409 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268410 = ADVANCED_FACE('',(#268411),#268422,.F.); +#268411 = FACE_BOUND('',#268412,.T.); +#268412 = EDGE_LOOP('',(#268413,#268414,#268420,#268421)); +#268413 = ORIENTED_EDGE('',*,*,#264217,.T.); +#268414 = ORIENTED_EDGE('',*,*,#268415,.T.); +#268415 = EDGE_CURVE('',#264218,#266117,#268416,.T.); +#268416 = LINE('',#268417,#268418); +#268417 = CARTESIAN_POINT('',(210.19165,-106.2981,-4.6E-02)); +#268418 = VECTOR('',#268419,1.); +#268419 = DIRECTION('',(0.,0.,1.)); +#268420 = ORIENTED_EDGE('',*,*,#266116,.F.); +#268421 = ORIENTED_EDGE('',*,*,#268415,.F.); +#268422 = CYLINDRICAL_SURFACE('',#268423,0.475); +#268423 = AXIS2_PLACEMENT_3D('',#268424,#268425,#268426); +#268424 = CARTESIAN_POINT('',(210.19165,-105.8231,-4.6E-02)); +#268425 = DIRECTION('',(-0.,0.,-1.)); +#268426 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268427 = ADVANCED_FACE('',(#268428),#268439,.F.); +#268428 = FACE_BOUND('',#268429,.T.); +#268429 = EDGE_LOOP('',(#268430,#268431,#268437,#268438)); +#268430 = ORIENTED_EDGE('',*,*,#264228,.T.); +#268431 = ORIENTED_EDGE('',*,*,#268432,.T.); +#268432 = EDGE_CURVE('',#264229,#266128,#268433,.T.); +#268433 = LINE('',#268434,#268435); +#268434 = CARTESIAN_POINT('',(210.19165,-103.7981,-4.6E-02)); +#268435 = VECTOR('',#268436,1.); +#268436 = DIRECTION('',(0.,0.,1.)); +#268437 = ORIENTED_EDGE('',*,*,#266127,.F.); +#268438 = ORIENTED_EDGE('',*,*,#268432,.F.); +#268439 = CYLINDRICAL_SURFACE('',#268440,0.475); +#268440 = AXIS2_PLACEMENT_3D('',#268441,#268442,#268443); +#268441 = CARTESIAN_POINT('',(210.19165,-103.3231,-4.6E-02)); +#268442 = DIRECTION('',(-0.,0.,-1.)); +#268443 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268444 = ADVANCED_FACE('',(#268445),#268456,.F.); +#268445 = FACE_BOUND('',#268446,.T.); +#268446 = EDGE_LOOP('',(#268447,#268448,#268454,#268455)); +#268447 = ORIENTED_EDGE('',*,*,#264239,.T.); +#268448 = ORIENTED_EDGE('',*,*,#268449,.T.); +#268449 = EDGE_CURVE('',#264240,#266139,#268450,.T.); +#268450 = LINE('',#268451,#268452); +#268451 = CARTESIAN_POINT('',(196.54165,-93.2231,-4.6E-02)); +#268452 = VECTOR('',#268453,1.); +#268453 = DIRECTION('',(0.,0.,1.)); +#268454 = ORIENTED_EDGE('',*,*,#266138,.F.); +#268455 = ORIENTED_EDGE('',*,*,#268449,.F.); +#268456 = CYLINDRICAL_SURFACE('',#268457,0.4); +#268457 = AXIS2_PLACEMENT_3D('',#268458,#268459,#268460); +#268458 = CARTESIAN_POINT('',(196.54165,-92.8231,-4.6E-02)); +#268459 = DIRECTION('',(-0.,-0.,-1.)); +#268460 = DIRECTION('',(-0.,-1.,0.)); +#268461 = ADVANCED_FACE('',(#268462),#268473,.F.); +#268462 = FACE_BOUND('',#268463,.T.); +#268463 = EDGE_LOOP('',(#268464,#268465,#268471,#268472)); +#268464 = ORIENTED_EDGE('',*,*,#264250,.T.); +#268465 = ORIENTED_EDGE('',*,*,#268466,.T.); +#268466 = EDGE_CURVE('',#264251,#266150,#268467,.T.); +#268467 = LINE('',#268468,#268469); +#268468 = CARTESIAN_POINT('',(210.19165,-95.7981,-4.6E-02)); +#268469 = VECTOR('',#268470,1.); +#268470 = DIRECTION('',(0.,0.,1.)); +#268471 = ORIENTED_EDGE('',*,*,#266149,.F.); +#268472 = ORIENTED_EDGE('',*,*,#268466,.F.); +#268473 = CYLINDRICAL_SURFACE('',#268474,0.475); +#268474 = AXIS2_PLACEMENT_3D('',#268475,#268476,#268477); +#268475 = CARTESIAN_POINT('',(210.19165,-95.3231,-4.6E-02)); +#268476 = DIRECTION('',(-0.,0.,-1.)); +#268477 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268478 = ADVANCED_FACE('',(#268479),#268490,.F.); +#268479 = FACE_BOUND('',#268480,.T.); +#268480 = EDGE_LOOP('',(#268481,#268482,#268488,#268489)); +#268481 = ORIENTED_EDGE('',*,*,#264261,.T.); +#268482 = ORIENTED_EDGE('',*,*,#268483,.T.); +#268483 = EDGE_CURVE('',#264262,#266161,#268484,.T.); +#268484 = LINE('',#268485,#268486); +#268485 = CARTESIAN_POINT('',(210.19165,-93.2981,-4.6E-02)); +#268486 = VECTOR('',#268487,1.); +#268487 = DIRECTION('',(0.,0.,1.)); +#268488 = ORIENTED_EDGE('',*,*,#266160,.F.); +#268489 = ORIENTED_EDGE('',*,*,#268483,.F.); +#268490 = CYLINDRICAL_SURFACE('',#268491,0.475); +#268491 = AXIS2_PLACEMENT_3D('',#268492,#268493,#268494); +#268492 = CARTESIAN_POINT('',(210.19165,-92.8231,-4.6E-02)); +#268493 = DIRECTION('',(-0.,0.,-1.)); +#268494 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268495 = ADVANCED_FACE('',(#268496),#268507,.F.); +#268496 = FACE_BOUND('',#268497,.T.); +#268497 = EDGE_LOOP('',(#268498,#268499,#268505,#268506)); +#268498 = ORIENTED_EDGE('',*,*,#264272,.T.); +#268499 = ORIENTED_EDGE('',*,*,#268500,.T.); +#268500 = EDGE_CURVE('',#264273,#266172,#268501,.T.); +#268501 = LINE('',#268502,#268503); +#268502 = CARTESIAN_POINT('',(106.11165,-81.8231,-4.6E-02)); +#268503 = VECTOR('',#268504,1.); +#268504 = DIRECTION('',(0.,0.,1.)); +#268505 = ORIENTED_EDGE('',*,*,#266171,.F.); +#268506 = ORIENTED_EDGE('',*,*,#268500,.F.); +#268507 = CYLINDRICAL_SURFACE('',#268508,0.5); +#268508 = AXIS2_PLACEMENT_3D('',#268509,#268510,#268511); +#268509 = CARTESIAN_POINT('',(106.11165,-81.3231,-4.6E-02)); +#268510 = DIRECTION('',(-0.,-0.,-1.)); +#268511 = DIRECTION('',(-0.,-1.,0.)); +#268512 = ADVANCED_FACE('',(#268513),#268524,.F.); +#268513 = FACE_BOUND('',#268514,.T.); +#268514 = EDGE_LOOP('',(#268515,#268516,#268522,#268523)); +#268515 = ORIENTED_EDGE('',*,*,#264283,.T.); +#268516 = ORIENTED_EDGE('',*,*,#268517,.T.); +#268517 = EDGE_CURVE('',#264284,#266183,#268518,.T.); +#268518 = LINE('',#268519,#268520); +#268519 = CARTESIAN_POINT('',(108.65165,-81.8231,-4.6E-02)); +#268520 = VECTOR('',#268521,1.); +#268521 = DIRECTION('',(0.,0.,1.)); +#268522 = ORIENTED_EDGE('',*,*,#266182,.F.); +#268523 = ORIENTED_EDGE('',*,*,#268517,.F.); +#268524 = CYLINDRICAL_SURFACE('',#268525,0.5); +#268525 = AXIS2_PLACEMENT_3D('',#268526,#268527,#268528); +#268526 = CARTESIAN_POINT('',(108.65165,-81.3231,-4.6E-02)); +#268527 = DIRECTION('',(-0.,-0.,-1.)); +#268528 = DIRECTION('',(-0.,-1.,0.)); +#268529 = ADVANCED_FACE('',(#268530),#268541,.F.); +#268530 = FACE_BOUND('',#268531,.T.); +#268531 = EDGE_LOOP('',(#268532,#268533,#268539,#268540)); +#268532 = ORIENTED_EDGE('',*,*,#264294,.T.); +#268533 = ORIENTED_EDGE('',*,*,#268534,.T.); +#268534 = EDGE_CURVE('',#264295,#266194,#268535,.T.); +#268535 = LINE('',#268536,#268537); +#268536 = CARTESIAN_POINT('',(111.19165,-81.8231,-4.6E-02)); +#268537 = VECTOR('',#268538,1.); +#268538 = DIRECTION('',(0.,0.,1.)); +#268539 = ORIENTED_EDGE('',*,*,#266193,.F.); +#268540 = ORIENTED_EDGE('',*,*,#268534,.F.); +#268541 = CYLINDRICAL_SURFACE('',#268542,0.5); +#268542 = AXIS2_PLACEMENT_3D('',#268543,#268544,#268545); +#268543 = CARTESIAN_POINT('',(111.19165,-81.3231,-4.6E-02)); +#268544 = DIRECTION('',(-0.,-0.,-1.)); +#268545 = DIRECTION('',(-0.,-1.,0.)); +#268546 = ADVANCED_FACE('',(#268547),#268558,.F.); +#268547 = FACE_BOUND('',#268548,.T.); +#268548 = EDGE_LOOP('',(#268549,#268550,#268556,#268557)); +#268549 = ORIENTED_EDGE('',*,*,#264305,.T.); +#268550 = ORIENTED_EDGE('',*,*,#268551,.T.); +#268551 = EDGE_CURVE('',#264306,#266205,#268552,.T.); +#268552 = LINE('',#268553,#268554); +#268553 = CARTESIAN_POINT('',(113.73165,-81.8231,-4.6E-02)); +#268554 = VECTOR('',#268555,1.); +#268555 = DIRECTION('',(0.,0.,1.)); +#268556 = ORIENTED_EDGE('',*,*,#266204,.F.); +#268557 = ORIENTED_EDGE('',*,*,#268551,.F.); +#268558 = CYLINDRICAL_SURFACE('',#268559,0.5); +#268559 = AXIS2_PLACEMENT_3D('',#268560,#268561,#268562); +#268560 = CARTESIAN_POINT('',(113.73165,-81.3231,-4.6E-02)); +#268561 = DIRECTION('',(-0.,-0.,-1.)); +#268562 = DIRECTION('',(-0.,-1.,0.)); +#268563 = ADVANCED_FACE('',(#268564),#268575,.F.); +#268564 = FACE_BOUND('',#268565,.T.); +#268565 = EDGE_LOOP('',(#268566,#268567,#268573,#268574)); +#268566 = ORIENTED_EDGE('',*,*,#264316,.T.); +#268567 = ORIENTED_EDGE('',*,*,#268568,.T.); +#268568 = EDGE_CURVE('',#264317,#266216,#268569,.T.); +#268569 = LINE('',#268570,#268571); +#268570 = CARTESIAN_POINT('',(107.19165,-74.6031,-4.6E-02)); +#268571 = VECTOR('',#268572,1.); +#268572 = DIRECTION('',(0.,0.,1.)); +#268573 = ORIENTED_EDGE('',*,*,#266215,.F.); +#268574 = ORIENTED_EDGE('',*,*,#268568,.F.); +#268575 = CYLINDRICAL_SURFACE('',#268576,0.5); +#268576 = AXIS2_PLACEMENT_3D('',#268577,#268578,#268579); +#268577 = CARTESIAN_POINT('',(107.19165,-74.1031,-4.6E-02)); +#268578 = DIRECTION('',(-0.,-0.,-1.)); +#268579 = DIRECTION('',(-0.,-1.,0.)); +#268580 = ADVANCED_FACE('',(#268581),#268592,.F.); +#268581 = FACE_BOUND('',#268582,.T.); +#268582 = EDGE_LOOP('',(#268583,#268584,#268590,#268591)); +#268583 = ORIENTED_EDGE('',*,*,#264327,.T.); +#268584 = ORIENTED_EDGE('',*,*,#268585,.T.); +#268585 = EDGE_CURVE('',#264328,#266227,#268586,.T.); +#268586 = LINE('',#268587,#268588); +#268587 = CARTESIAN_POINT('',(109.73165,-74.6031,-4.6E-02)); +#268588 = VECTOR('',#268589,1.); +#268589 = DIRECTION('',(0.,0.,1.)); +#268590 = ORIENTED_EDGE('',*,*,#266226,.F.); +#268591 = ORIENTED_EDGE('',*,*,#268585,.F.); +#268592 = CYLINDRICAL_SURFACE('',#268593,0.5); +#268593 = AXIS2_PLACEMENT_3D('',#268594,#268595,#268596); +#268594 = CARTESIAN_POINT('',(109.73165,-74.1031,-4.6E-02)); +#268595 = DIRECTION('',(-0.,-0.,-1.)); +#268596 = DIRECTION('',(-0.,-1.,0.)); +#268597 = ADVANCED_FACE('',(#268598),#268609,.F.); +#268598 = FACE_BOUND('',#268599,.T.); +#268599 = EDGE_LOOP('',(#268600,#268601,#268607,#268608)); +#268600 = ORIENTED_EDGE('',*,*,#264338,.T.); +#268601 = ORIENTED_EDGE('',*,*,#268602,.T.); +#268602 = EDGE_CURVE('',#264339,#266238,#268603,.T.); +#268603 = LINE('',#268604,#268605); +#268604 = CARTESIAN_POINT('',(112.27165,-74.6031,-4.6E-02)); +#268605 = VECTOR('',#268606,1.); +#268606 = DIRECTION('',(0.,0.,1.)); +#268607 = ORIENTED_EDGE('',*,*,#266237,.F.); +#268608 = ORIENTED_EDGE('',*,*,#268602,.F.); +#268609 = CYLINDRICAL_SURFACE('',#268610,0.5); +#268610 = AXIS2_PLACEMENT_3D('',#268611,#268612,#268613); +#268611 = CARTESIAN_POINT('',(112.27165,-74.1031,-4.6E-02)); +#268612 = DIRECTION('',(-0.,-0.,-1.)); +#268613 = DIRECTION('',(-0.,-1.,0.)); +#268614 = ADVANCED_FACE('',(#268615),#268626,.F.); +#268615 = FACE_BOUND('',#268616,.T.); +#268616 = EDGE_LOOP('',(#268617,#268618,#268624,#268625)); +#268617 = ORIENTED_EDGE('',*,*,#264349,.T.); +#268618 = ORIENTED_EDGE('',*,*,#268619,.T.); +#268619 = EDGE_CURVE('',#264350,#266249,#268620,.T.); +#268620 = LINE('',#268621,#268622); +#268621 = CARTESIAN_POINT('',(114.81165,-74.6031,-4.6E-02)); +#268622 = VECTOR('',#268623,1.); +#268623 = DIRECTION('',(0.,0.,1.)); +#268624 = ORIENTED_EDGE('',*,*,#266248,.F.); +#268625 = ORIENTED_EDGE('',*,*,#268619,.F.); +#268626 = CYLINDRICAL_SURFACE('',#268627,0.5); +#268627 = AXIS2_PLACEMENT_3D('',#268628,#268629,#268630); +#268628 = CARTESIAN_POINT('',(114.81165,-74.1031,-4.6E-02)); +#268629 = DIRECTION('',(-0.,-0.,-1.)); +#268630 = DIRECTION('',(-0.,-1.,0.)); +#268631 = ADVANCED_FACE('',(#268632),#268643,.F.); +#268632 = FACE_BOUND('',#268633,.T.); +#268633 = EDGE_LOOP('',(#268634,#268635,#268641,#268642)); +#268634 = ORIENTED_EDGE('',*,*,#264360,.T.); +#268635 = ORIENTED_EDGE('',*,*,#268636,.T.); +#268636 = EDGE_CURVE('',#264361,#266260,#268637,.T.); +#268637 = LINE('',#268638,#268639); +#268638 = CARTESIAN_POINT('',(116.27165,-81.8231,-4.6E-02)); +#268639 = VECTOR('',#268640,1.); +#268640 = DIRECTION('',(0.,0.,1.)); +#268641 = ORIENTED_EDGE('',*,*,#266259,.F.); +#268642 = ORIENTED_EDGE('',*,*,#268636,.F.); +#268643 = CYLINDRICAL_SURFACE('',#268644,0.5); +#268644 = AXIS2_PLACEMENT_3D('',#268645,#268646,#268647); +#268645 = CARTESIAN_POINT('',(116.27165,-81.3231,-4.6E-02)); +#268646 = DIRECTION('',(-0.,-0.,-1.)); +#268647 = DIRECTION('',(-0.,-1.,0.)); +#268648 = ADVANCED_FACE('',(#268649),#268660,.F.); +#268649 = FACE_BOUND('',#268650,.T.); +#268650 = EDGE_LOOP('',(#268651,#268652,#268658,#268659)); +#268651 = ORIENTED_EDGE('',*,*,#264371,.T.); +#268652 = ORIENTED_EDGE('',*,*,#268653,.T.); +#268653 = EDGE_CURVE('',#264372,#266271,#268654,.T.); +#268654 = LINE('',#268655,#268656); +#268655 = CARTESIAN_POINT('',(118.81165,-81.8231,-4.6E-02)); +#268656 = VECTOR('',#268657,1.); +#268657 = DIRECTION('',(0.,0.,1.)); +#268658 = ORIENTED_EDGE('',*,*,#266270,.F.); +#268659 = ORIENTED_EDGE('',*,*,#268653,.F.); +#268660 = CYLINDRICAL_SURFACE('',#268661,0.5); +#268661 = AXIS2_PLACEMENT_3D('',#268662,#268663,#268664); +#268662 = CARTESIAN_POINT('',(118.81165,-81.3231,-4.6E-02)); +#268663 = DIRECTION('',(-0.,-0.,-1.)); +#268664 = DIRECTION('',(-0.,-1.,0.)); +#268665 = ADVANCED_FACE('',(#268666),#268677,.F.); +#268666 = FACE_BOUND('',#268667,.T.); +#268667 = EDGE_LOOP('',(#268668,#268669,#268675,#268676)); +#268668 = ORIENTED_EDGE('',*,*,#264382,.T.); +#268669 = ORIENTED_EDGE('',*,*,#268670,.T.); +#268670 = EDGE_CURVE('',#264383,#266282,#268671,.T.); +#268671 = LINE('',#268672,#268673); +#268672 = CARTESIAN_POINT('',(121.35165,-81.8231,-4.6E-02)); +#268673 = VECTOR('',#268674,1.); +#268674 = DIRECTION('',(0.,0.,1.)); +#268675 = ORIENTED_EDGE('',*,*,#266281,.F.); +#268676 = ORIENTED_EDGE('',*,*,#268670,.F.); +#268677 = CYLINDRICAL_SURFACE('',#268678,0.5); +#268678 = AXIS2_PLACEMENT_3D('',#268679,#268680,#268681); +#268679 = CARTESIAN_POINT('',(121.35165,-81.3231,-4.6E-02)); +#268680 = DIRECTION('',(-0.,-0.,-1.)); +#268681 = DIRECTION('',(-0.,-1.,0.)); +#268682 = ADVANCED_FACE('',(#268683),#268694,.F.); +#268683 = FACE_BOUND('',#268684,.T.); +#268684 = EDGE_LOOP('',(#268685,#268686,#268692,#268693)); +#268685 = ORIENTED_EDGE('',*,*,#264393,.T.); +#268686 = ORIENTED_EDGE('',*,*,#268687,.T.); +#268687 = EDGE_CURVE('',#264394,#266293,#268688,.T.); +#268688 = LINE('',#268689,#268690); +#268689 = CARTESIAN_POINT('',(123.89165,-81.8231,-4.6E-02)); +#268690 = VECTOR('',#268691,1.); +#268691 = DIRECTION('',(0.,0.,1.)); +#268692 = ORIENTED_EDGE('',*,*,#266292,.F.); +#268693 = ORIENTED_EDGE('',*,*,#268687,.F.); +#268694 = CYLINDRICAL_SURFACE('',#268695,0.5); +#268695 = AXIS2_PLACEMENT_3D('',#268696,#268697,#268698); +#268696 = CARTESIAN_POINT('',(123.89165,-81.3231,-4.6E-02)); +#268697 = DIRECTION('',(-0.,-0.,-1.)); +#268698 = DIRECTION('',(-0.,-1.,0.)); +#268699 = ADVANCED_FACE('',(#268700),#268711,.F.); +#268700 = FACE_BOUND('',#268701,.T.); +#268701 = EDGE_LOOP('',(#268702,#268703,#268709,#268710)); +#268702 = ORIENTED_EDGE('',*,*,#264404,.T.); +#268703 = ORIENTED_EDGE('',*,*,#268704,.T.); +#268704 = EDGE_CURVE('',#264405,#266304,#268705,.T.); +#268705 = LINE('',#268706,#268707); +#268706 = CARTESIAN_POINT('',(126.43165,-81.8231,-4.6E-02)); +#268707 = VECTOR('',#268708,1.); +#268708 = DIRECTION('',(0.,0.,1.)); +#268709 = ORIENTED_EDGE('',*,*,#266303,.F.); +#268710 = ORIENTED_EDGE('',*,*,#268704,.F.); +#268711 = CYLINDRICAL_SURFACE('',#268712,0.5); +#268712 = AXIS2_PLACEMENT_3D('',#268713,#268714,#268715); +#268713 = CARTESIAN_POINT('',(126.43165,-81.3231,-4.6E-02)); +#268714 = DIRECTION('',(-0.,-0.,-1.)); +#268715 = DIRECTION('',(-0.,-1.,0.)); +#268716 = ADVANCED_FACE('',(#268717),#268728,.F.); +#268717 = FACE_BOUND('',#268718,.T.); +#268718 = EDGE_LOOP('',(#268719,#268720,#268726,#268727)); +#268719 = ORIENTED_EDGE('',*,*,#264415,.T.); +#268720 = ORIENTED_EDGE('',*,*,#268721,.T.); +#268721 = EDGE_CURVE('',#264416,#266315,#268722,.T.); +#268722 = LINE('',#268723,#268724); +#268723 = CARTESIAN_POINT('',(128.97165,-81.8231,-4.6E-02)); +#268724 = VECTOR('',#268725,1.); +#268725 = DIRECTION('',(0.,0.,1.)); +#268726 = ORIENTED_EDGE('',*,*,#266314,.F.); +#268727 = ORIENTED_EDGE('',*,*,#268721,.F.); +#268728 = CYLINDRICAL_SURFACE('',#268729,0.5); +#268729 = AXIS2_PLACEMENT_3D('',#268730,#268731,#268732); +#268730 = CARTESIAN_POINT('',(128.97165,-81.3231,-4.6E-02)); +#268731 = DIRECTION('',(-0.,-0.,-1.)); +#268732 = DIRECTION('',(-0.,-1.,0.)); +#268733 = ADVANCED_FACE('',(#268734),#268745,.F.); +#268734 = FACE_BOUND('',#268735,.T.); +#268735 = EDGE_LOOP('',(#268736,#268737,#268743,#268744)); +#268736 = ORIENTED_EDGE('',*,*,#264426,.T.); +#268737 = ORIENTED_EDGE('',*,*,#268738,.T.); +#268738 = EDGE_CURVE('',#264427,#266326,#268739,.T.); +#268739 = LINE('',#268740,#268741); +#268740 = CARTESIAN_POINT('',(133.03165,-81.8231,-4.6E-02)); +#268741 = VECTOR('',#268742,1.); +#268742 = DIRECTION('',(0.,0.,1.)); +#268743 = ORIENTED_EDGE('',*,*,#266325,.F.); +#268744 = ORIENTED_EDGE('',*,*,#268738,.F.); +#268745 = CYLINDRICAL_SURFACE('',#268746,0.5); +#268746 = AXIS2_PLACEMENT_3D('',#268747,#268748,#268749); +#268747 = CARTESIAN_POINT('',(133.03165,-81.3231,-4.6E-02)); +#268748 = DIRECTION('',(-0.,-0.,-1.)); +#268749 = DIRECTION('',(-0.,-1.,0.)); +#268750 = ADVANCED_FACE('',(#268751),#268762,.F.); +#268751 = FACE_BOUND('',#268752,.T.); +#268752 = EDGE_LOOP('',(#268753,#268754,#268760,#268761)); +#268753 = ORIENTED_EDGE('',*,*,#264437,.T.); +#268754 = ORIENTED_EDGE('',*,*,#268755,.T.); +#268755 = EDGE_CURVE('',#264438,#266337,#268756,.T.); +#268756 = LINE('',#268757,#268758); +#268757 = CARTESIAN_POINT('',(135.57165,-81.8231,-4.6E-02)); +#268758 = VECTOR('',#268759,1.); +#268759 = DIRECTION('',(0.,0.,1.)); +#268760 = ORIENTED_EDGE('',*,*,#266336,.F.); +#268761 = ORIENTED_EDGE('',*,*,#268755,.F.); +#268762 = CYLINDRICAL_SURFACE('',#268763,0.5); +#268763 = AXIS2_PLACEMENT_3D('',#268764,#268765,#268766); +#268764 = CARTESIAN_POINT('',(135.57165,-81.3231,-4.6E-02)); +#268765 = DIRECTION('',(-0.,-0.,-1.)); +#268766 = DIRECTION('',(-0.,-1.,0.)); +#268767 = ADVANCED_FACE('',(#268768),#268779,.F.); +#268768 = FACE_BOUND('',#268769,.T.); +#268769 = EDGE_LOOP('',(#268770,#268771,#268777,#268778)); +#268770 = ORIENTED_EDGE('',*,*,#264448,.T.); +#268771 = ORIENTED_EDGE('',*,*,#268772,.T.); +#268772 = EDGE_CURVE('',#264449,#266348,#268773,.T.); +#268773 = LINE('',#268774,#268775); +#268774 = CARTESIAN_POINT('',(138.11165,-81.8231,-4.6E-02)); +#268775 = VECTOR('',#268776,1.); +#268776 = DIRECTION('',(0.,0.,1.)); +#268777 = ORIENTED_EDGE('',*,*,#266347,.F.); +#268778 = ORIENTED_EDGE('',*,*,#268772,.F.); +#268779 = CYLINDRICAL_SURFACE('',#268780,0.5); +#268780 = AXIS2_PLACEMENT_3D('',#268781,#268782,#268783); +#268781 = CARTESIAN_POINT('',(138.11165,-81.3231,-4.6E-02)); +#268782 = DIRECTION('',(-0.,-0.,-1.)); +#268783 = DIRECTION('',(-0.,-1.,0.)); +#268784 = ADVANCED_FACE('',(#268785),#268796,.F.); +#268785 = FACE_BOUND('',#268786,.T.); +#268786 = EDGE_LOOP('',(#268787,#268788,#268794,#268795)); +#268787 = ORIENTED_EDGE('',*,*,#264459,.T.); +#268788 = ORIENTED_EDGE('',*,*,#268789,.T.); +#268789 = EDGE_CURVE('',#264460,#266359,#268790,.T.); +#268790 = LINE('',#268791,#268792); +#268791 = CARTESIAN_POINT('',(140.65165,-81.8231,-4.6E-02)); +#268792 = VECTOR('',#268793,1.); +#268793 = DIRECTION('',(0.,0.,1.)); +#268794 = ORIENTED_EDGE('',*,*,#266358,.F.); +#268795 = ORIENTED_EDGE('',*,*,#268789,.F.); +#268796 = CYLINDRICAL_SURFACE('',#268797,0.5); +#268797 = AXIS2_PLACEMENT_3D('',#268798,#268799,#268800); +#268798 = CARTESIAN_POINT('',(140.65165,-81.3231,-4.6E-02)); +#268799 = DIRECTION('',(-0.,-0.,-1.)); +#268800 = DIRECTION('',(-0.,-1.,0.)); +#268801 = ADVANCED_FACE('',(#268802),#268813,.F.); +#268802 = FACE_BOUND('',#268803,.T.); +#268803 = EDGE_LOOP('',(#268804,#268805,#268811,#268812)); +#268804 = ORIENTED_EDGE('',*,*,#264470,.T.); +#268805 = ORIENTED_EDGE('',*,*,#268806,.T.); +#268806 = EDGE_CURVE('',#264471,#266370,#268807,.T.); +#268807 = LINE('',#268808,#268809); +#268808 = CARTESIAN_POINT('',(143.19165,-81.8231,-4.6E-02)); +#268809 = VECTOR('',#268810,1.); +#268810 = DIRECTION('',(0.,0.,1.)); +#268811 = ORIENTED_EDGE('',*,*,#266369,.F.); +#268812 = ORIENTED_EDGE('',*,*,#268806,.F.); +#268813 = CYLINDRICAL_SURFACE('',#268814,0.5); +#268814 = AXIS2_PLACEMENT_3D('',#268815,#268816,#268817); +#268815 = CARTESIAN_POINT('',(143.19165,-81.3231,-4.6E-02)); +#268816 = DIRECTION('',(-0.,-0.,-1.)); +#268817 = DIRECTION('',(-0.,-1.,0.)); +#268818 = ADVANCED_FACE('',(#268819),#268830,.F.); +#268819 = FACE_BOUND('',#268820,.T.); +#268820 = EDGE_LOOP('',(#268821,#268822,#268828,#268829)); +#268821 = ORIENTED_EDGE('',*,*,#264481,.T.); +#268822 = ORIENTED_EDGE('',*,*,#268823,.T.); +#268823 = EDGE_CURVE('',#264482,#266381,#268824,.T.); +#268824 = LINE('',#268825,#268826); +#268825 = CARTESIAN_POINT('',(145.73165,-81.8231,-4.6E-02)); +#268826 = VECTOR('',#268827,1.); +#268827 = DIRECTION('',(0.,0.,1.)); +#268828 = ORIENTED_EDGE('',*,*,#266380,.F.); +#268829 = ORIENTED_EDGE('',*,*,#268823,.F.); +#268830 = CYLINDRICAL_SURFACE('',#268831,0.5); +#268831 = AXIS2_PLACEMENT_3D('',#268832,#268833,#268834); +#268832 = CARTESIAN_POINT('',(145.73165,-81.3231,-4.6E-02)); +#268833 = DIRECTION('',(-0.,-0.,-1.)); +#268834 = DIRECTION('',(-0.,-1.,0.)); +#268835 = ADVANCED_FACE('',(#268836),#268847,.F.); +#268836 = FACE_BOUND('',#268837,.T.); +#268837 = EDGE_LOOP('',(#268838,#268839,#268845,#268846)); +#268838 = ORIENTED_EDGE('',*,*,#264492,.T.); +#268839 = ORIENTED_EDGE('',*,*,#268840,.T.); +#268840 = EDGE_CURVE('',#264493,#266392,#268841,.T.); +#268841 = LINE('',#268842,#268843); +#268842 = CARTESIAN_POINT('',(117.35165,-74.6031,-4.6E-02)); +#268843 = VECTOR('',#268844,1.); +#268844 = DIRECTION('',(0.,0.,1.)); +#268845 = ORIENTED_EDGE('',*,*,#266391,.F.); +#268846 = ORIENTED_EDGE('',*,*,#268840,.F.); +#268847 = CYLINDRICAL_SURFACE('',#268848,0.5); +#268848 = AXIS2_PLACEMENT_3D('',#268849,#268850,#268851); +#268849 = CARTESIAN_POINT('',(117.35165,-74.1031,-4.6E-02)); +#268850 = DIRECTION('',(-0.,-0.,-1.)); +#268851 = DIRECTION('',(-0.,-1.,0.)); +#268852 = ADVANCED_FACE('',(#268853),#268864,.F.); +#268853 = FACE_BOUND('',#268854,.T.); +#268854 = EDGE_LOOP('',(#268855,#268856,#268862,#268863)); +#268855 = ORIENTED_EDGE('',*,*,#264503,.T.); +#268856 = ORIENTED_EDGE('',*,*,#268857,.T.); +#268857 = EDGE_CURVE('',#264504,#266403,#268858,.T.); +#268858 = LINE('',#268859,#268860); +#268859 = CARTESIAN_POINT('',(119.89165,-74.6031,-4.6E-02)); +#268860 = VECTOR('',#268861,1.); +#268861 = DIRECTION('',(0.,0.,1.)); +#268862 = ORIENTED_EDGE('',*,*,#266402,.F.); +#268863 = ORIENTED_EDGE('',*,*,#268857,.F.); +#268864 = CYLINDRICAL_SURFACE('',#268865,0.5); +#268865 = AXIS2_PLACEMENT_3D('',#268866,#268867,#268868); +#268866 = CARTESIAN_POINT('',(119.89165,-74.1031,-4.6E-02)); +#268867 = DIRECTION('',(-0.,-0.,-1.)); +#268868 = DIRECTION('',(-0.,-1.,0.)); +#268869 = ADVANCED_FACE('',(#268870),#268881,.F.); +#268870 = FACE_BOUND('',#268871,.T.); +#268871 = EDGE_LOOP('',(#268872,#268873,#268879,#268880)); +#268872 = ORIENTED_EDGE('',*,*,#264514,.T.); +#268873 = ORIENTED_EDGE('',*,*,#268874,.T.); +#268874 = EDGE_CURVE('',#264515,#266414,#268875,.T.); +#268875 = LINE('',#268876,#268877); +#268876 = CARTESIAN_POINT('',(122.43165,-74.6031,-4.6E-02)); +#268877 = VECTOR('',#268878,1.); +#268878 = DIRECTION('',(0.,0.,1.)); +#268879 = ORIENTED_EDGE('',*,*,#266413,.F.); +#268880 = ORIENTED_EDGE('',*,*,#268874,.F.); +#268881 = CYLINDRICAL_SURFACE('',#268882,0.5); +#268882 = AXIS2_PLACEMENT_3D('',#268883,#268884,#268885); +#268883 = CARTESIAN_POINT('',(122.43165,-74.1031,-4.6E-02)); +#268884 = DIRECTION('',(-0.,-0.,-1.)); +#268885 = DIRECTION('',(-0.,-1.,0.)); +#268886 = ADVANCED_FACE('',(#268887),#268898,.F.); +#268887 = FACE_BOUND('',#268888,.T.); +#268888 = EDGE_LOOP('',(#268889,#268890,#268896,#268897)); +#268889 = ORIENTED_EDGE('',*,*,#264525,.T.); +#268890 = ORIENTED_EDGE('',*,*,#268891,.T.); +#268891 = EDGE_CURVE('',#264526,#266425,#268892,.T.); +#268892 = LINE('',#268893,#268894); +#268893 = CARTESIAN_POINT('',(124.97165,-74.6031,-4.6E-02)); +#268894 = VECTOR('',#268895,1.); +#268895 = DIRECTION('',(0.,0.,1.)); +#268896 = ORIENTED_EDGE('',*,*,#266424,.F.); +#268897 = ORIENTED_EDGE('',*,*,#268891,.F.); +#268898 = CYLINDRICAL_SURFACE('',#268899,0.5); +#268899 = AXIS2_PLACEMENT_3D('',#268900,#268901,#268902); +#268900 = CARTESIAN_POINT('',(124.97165,-74.1031,-4.6E-02)); +#268901 = DIRECTION('',(-0.,-0.,-1.)); +#268902 = DIRECTION('',(-0.,-1.,0.)); +#268903 = ADVANCED_FACE('',(#268904),#268915,.F.); +#268904 = FACE_BOUND('',#268905,.T.); +#268905 = EDGE_LOOP('',(#268906,#268907,#268913,#268914)); +#268906 = ORIENTED_EDGE('',*,*,#264536,.T.); +#268907 = ORIENTED_EDGE('',*,*,#268908,.T.); +#268908 = EDGE_CURVE('',#264537,#266436,#268909,.T.); +#268909 = LINE('',#268910,#268911); +#268910 = CARTESIAN_POINT('',(127.51165,-74.6031,-4.6E-02)); +#268911 = VECTOR('',#268912,1.); +#268912 = DIRECTION('',(0.,0.,1.)); +#268913 = ORIENTED_EDGE('',*,*,#266435,.F.); +#268914 = ORIENTED_EDGE('',*,*,#268908,.F.); +#268915 = CYLINDRICAL_SURFACE('',#268916,0.5); +#268916 = AXIS2_PLACEMENT_3D('',#268917,#268918,#268919); +#268917 = CARTESIAN_POINT('',(127.51165,-74.1031,-4.6E-02)); +#268918 = DIRECTION('',(-0.,-0.,-1.)); +#268919 = DIRECTION('',(-0.,-1.,0.)); +#268920 = ADVANCED_FACE('',(#268921),#268932,.F.); +#268921 = FACE_BOUND('',#268922,.T.); +#268922 = EDGE_LOOP('',(#268923,#268924,#268930,#268931)); +#268923 = ORIENTED_EDGE('',*,*,#264547,.T.); +#268924 = ORIENTED_EDGE('',*,*,#268925,.T.); +#268925 = EDGE_CURVE('',#264548,#266447,#268926,.T.); +#268926 = LINE('',#268927,#268928); +#268927 = CARTESIAN_POINT('',(130.05165,-74.6031,-4.6E-02)); +#268928 = VECTOR('',#268929,1.); +#268929 = DIRECTION('',(0.,0.,1.)); +#268930 = ORIENTED_EDGE('',*,*,#266446,.F.); +#268931 = ORIENTED_EDGE('',*,*,#268925,.F.); +#268932 = CYLINDRICAL_SURFACE('',#268933,0.5); +#268933 = AXIS2_PLACEMENT_3D('',#268934,#268935,#268936); +#268934 = CARTESIAN_POINT('',(130.05165,-74.1031,-4.6E-02)); +#268935 = DIRECTION('',(-0.,-0.,-1.)); +#268936 = DIRECTION('',(-0.,-1.,0.)); +#268937 = ADVANCED_FACE('',(#268938),#268949,.F.); +#268938 = FACE_BOUND('',#268939,.T.); +#268939 = EDGE_LOOP('',(#268940,#268941,#268947,#268948)); +#268940 = ORIENTED_EDGE('',*,*,#264558,.T.); +#268941 = ORIENTED_EDGE('',*,*,#268942,.T.); +#268942 = EDGE_CURVE('',#264559,#266458,#268943,.T.); +#268943 = LINE('',#268944,#268945); +#268944 = CARTESIAN_POINT('',(132.59165,-74.6031,-4.6E-02)); +#268945 = VECTOR('',#268946,1.); +#268946 = DIRECTION('',(0.,0.,1.)); +#268947 = ORIENTED_EDGE('',*,*,#266457,.F.); +#268948 = ORIENTED_EDGE('',*,*,#268942,.F.); +#268949 = CYLINDRICAL_SURFACE('',#268950,0.5); +#268950 = AXIS2_PLACEMENT_3D('',#268951,#268952,#268953); +#268951 = CARTESIAN_POINT('',(132.59165,-74.1031,-4.6E-02)); +#268952 = DIRECTION('',(-0.,-0.,-1.)); +#268953 = DIRECTION('',(-0.,-1.,0.)); +#268954 = ADVANCED_FACE('',(#268955),#268966,.F.); +#268955 = FACE_BOUND('',#268956,.T.); +#268956 = EDGE_LOOP('',(#268957,#268958,#268964,#268965)); +#268957 = ORIENTED_EDGE('',*,*,#264569,.T.); +#268958 = ORIENTED_EDGE('',*,*,#268959,.T.); +#268959 = EDGE_CURVE('',#264570,#266469,#268960,.T.); +#268960 = LINE('',#268961,#268962); +#268961 = CARTESIAN_POINT('',(135.13165,-74.6031,-4.6E-02)); +#268962 = VECTOR('',#268963,1.); +#268963 = DIRECTION('',(0.,0.,1.)); +#268964 = ORIENTED_EDGE('',*,*,#266468,.F.); +#268965 = ORIENTED_EDGE('',*,*,#268959,.F.); +#268966 = CYLINDRICAL_SURFACE('',#268967,0.5); +#268967 = AXIS2_PLACEMENT_3D('',#268968,#268969,#268970); +#268968 = CARTESIAN_POINT('',(135.13165,-74.1031,-4.6E-02)); +#268969 = DIRECTION('',(-0.,-0.,-1.)); +#268970 = DIRECTION('',(-0.,-1.,0.)); +#268971 = ADVANCED_FACE('',(#268972),#268983,.F.); +#268972 = FACE_BOUND('',#268973,.T.); +#268973 = EDGE_LOOP('',(#268974,#268975,#268981,#268982)); +#268974 = ORIENTED_EDGE('',*,*,#264580,.T.); +#268975 = ORIENTED_EDGE('',*,*,#268976,.T.); +#268976 = EDGE_CURVE('',#264581,#266480,#268977,.T.); +#268977 = LINE('',#268978,#268979); +#268978 = CARTESIAN_POINT('',(137.67165,-74.6031,-4.6E-02)); +#268979 = VECTOR('',#268980,1.); +#268980 = DIRECTION('',(0.,0.,1.)); +#268981 = ORIENTED_EDGE('',*,*,#266479,.F.); +#268982 = ORIENTED_EDGE('',*,*,#268976,.F.); +#268983 = CYLINDRICAL_SURFACE('',#268984,0.5); +#268984 = AXIS2_PLACEMENT_3D('',#268985,#268986,#268987); +#268985 = CARTESIAN_POINT('',(137.67165,-74.1031,-4.6E-02)); +#268986 = DIRECTION('',(-0.,-0.,-1.)); +#268987 = DIRECTION('',(-0.,-1.,0.)); +#268988 = ADVANCED_FACE('',(#268989),#269000,.F.); +#268989 = FACE_BOUND('',#268990,.T.); +#268990 = EDGE_LOOP('',(#268991,#268992,#268998,#268999)); +#268991 = ORIENTED_EDGE('',*,*,#264591,.T.); +#268992 = ORIENTED_EDGE('',*,*,#268993,.T.); +#268993 = EDGE_CURVE('',#264592,#266491,#268994,.T.); +#268994 = LINE('',#268995,#268996); +#268995 = CARTESIAN_POINT('',(140.21165,-74.6031,-4.6E-02)); +#268996 = VECTOR('',#268997,1.); +#268997 = DIRECTION('',(0.,0.,1.)); +#268998 = ORIENTED_EDGE('',*,*,#266490,.F.); +#268999 = ORIENTED_EDGE('',*,*,#268993,.F.); +#269000 = CYLINDRICAL_SURFACE('',#269001,0.5); +#269001 = AXIS2_PLACEMENT_3D('',#269002,#269003,#269004); +#269002 = CARTESIAN_POINT('',(140.21165,-74.1031,-4.6E-02)); +#269003 = DIRECTION('',(-0.,-0.,-1.)); +#269004 = DIRECTION('',(-0.,-1.,0.)); +#269005 = ADVANCED_FACE('',(#269006),#269017,.F.); +#269006 = FACE_BOUND('',#269007,.T.); +#269007 = EDGE_LOOP('',(#269008,#269009,#269015,#269016)); +#269008 = ORIENTED_EDGE('',*,*,#264602,.T.); +#269009 = ORIENTED_EDGE('',*,*,#269010,.T.); +#269010 = EDGE_CURVE('',#264603,#266502,#269011,.T.); +#269011 = LINE('',#269012,#269013); +#269012 = CARTESIAN_POINT('',(142.75165,-74.6031,-4.6E-02)); +#269013 = VECTOR('',#269014,1.); +#269014 = DIRECTION('',(0.,0.,1.)); +#269015 = ORIENTED_EDGE('',*,*,#266501,.F.); +#269016 = ORIENTED_EDGE('',*,*,#269010,.F.); +#269017 = CYLINDRICAL_SURFACE('',#269018,0.5); +#269018 = AXIS2_PLACEMENT_3D('',#269019,#269020,#269021); +#269019 = CARTESIAN_POINT('',(142.75165,-74.1031,-4.6E-02)); +#269020 = DIRECTION('',(-0.,-0.,-1.)); +#269021 = DIRECTION('',(-0.,-1.,0.)); +#269022 = ADVANCED_FACE('',(#269023),#269034,.F.); +#269023 = FACE_BOUND('',#269024,.T.); +#269024 = EDGE_LOOP('',(#269025,#269026,#269032,#269033)); +#269025 = ORIENTED_EDGE('',*,*,#264613,.T.); +#269026 = ORIENTED_EDGE('',*,*,#269027,.T.); +#269027 = EDGE_CURVE('',#264614,#266513,#269028,.T.); +#269028 = LINE('',#269029,#269030); +#269029 = CARTESIAN_POINT('',(145.29165,-74.6031,-4.6E-02)); +#269030 = VECTOR('',#269031,1.); +#269031 = DIRECTION('',(0.,0.,1.)); +#269032 = ORIENTED_EDGE('',*,*,#266512,.F.); +#269033 = ORIENTED_EDGE('',*,*,#269027,.F.); +#269034 = CYLINDRICAL_SURFACE('',#269035,0.5); +#269035 = AXIS2_PLACEMENT_3D('',#269036,#269037,#269038); +#269036 = CARTESIAN_POINT('',(145.29165,-74.1031,-4.6E-02)); +#269037 = DIRECTION('',(-0.,-0.,-1.)); +#269038 = DIRECTION('',(-0.,-1.,0.)); +#269039 = ADVANCED_FACE('',(#269040),#269051,.F.); +#269040 = FACE_BOUND('',#269041,.T.); +#269041 = EDGE_LOOP('',(#269042,#269043,#269049,#269050)); +#269042 = ORIENTED_EDGE('',*,*,#264624,.T.); +#269043 = ORIENTED_EDGE('',*,*,#269044,.T.); +#269044 = EDGE_CURVE('',#264625,#266524,#269045,.T.); +#269045 = LINE('',#269046,#269047); +#269046 = CARTESIAN_POINT('',(147.83165,-74.6031,-4.6E-02)); +#269047 = VECTOR('',#269048,1.); +#269048 = DIRECTION('',(0.,0.,1.)); +#269049 = ORIENTED_EDGE('',*,*,#266523,.F.); +#269050 = ORIENTED_EDGE('',*,*,#269044,.F.); +#269051 = CYLINDRICAL_SURFACE('',#269052,0.5); +#269052 = AXIS2_PLACEMENT_3D('',#269053,#269054,#269055); +#269053 = CARTESIAN_POINT('',(147.83165,-74.1031,-4.6E-02)); +#269054 = DIRECTION('',(-0.,-0.,-1.)); +#269055 = DIRECTION('',(-0.,-1.,0.)); +#269056 = ADVANCED_FACE('',(#269057),#269068,.F.); +#269057 = FACE_BOUND('',#269058,.T.); +#269058 = EDGE_LOOP('',(#269059,#269060,#269066,#269067)); +#269059 = ORIENTED_EDGE('',*,*,#264635,.T.); +#269060 = ORIENTED_EDGE('',*,*,#269061,.T.); +#269061 = EDGE_CURVE('',#264636,#266535,#269062,.T.); +#269062 = LINE('',#269063,#269064); +#269063 = CARTESIAN_POINT('',(107.19165,-56.8231,-4.6E-02)); +#269064 = VECTOR('',#269065,1.); +#269065 = DIRECTION('',(0.,0.,1.)); +#269066 = ORIENTED_EDGE('',*,*,#266534,.F.); +#269067 = ORIENTED_EDGE('',*,*,#269061,.F.); +#269068 = CYLINDRICAL_SURFACE('',#269069,0.5); +#269069 = AXIS2_PLACEMENT_3D('',#269070,#269071,#269072); +#269070 = CARTESIAN_POINT('',(107.19165,-56.3231,-4.6E-02)); +#269071 = DIRECTION('',(-0.,-0.,-1.)); +#269072 = DIRECTION('',(-0.,-1.,0.)); +#269073 = ADVANCED_FACE('',(#269074),#269085,.F.); +#269074 = FACE_BOUND('',#269075,.T.); +#269075 = EDGE_LOOP('',(#269076,#269077,#269083,#269084)); +#269076 = ORIENTED_EDGE('',*,*,#264646,.T.); +#269077 = ORIENTED_EDGE('',*,*,#269078,.T.); +#269078 = EDGE_CURVE('',#264647,#266546,#269079,.T.); +#269079 = LINE('',#269080,#269081); +#269080 = CARTESIAN_POINT('',(109.73165,-56.8231,-4.6E-02)); +#269081 = VECTOR('',#269082,1.); +#269082 = DIRECTION('',(0.,0.,1.)); +#269083 = ORIENTED_EDGE('',*,*,#266545,.F.); +#269084 = ORIENTED_EDGE('',*,*,#269078,.F.); +#269085 = CYLINDRICAL_SURFACE('',#269086,0.5); +#269086 = AXIS2_PLACEMENT_3D('',#269087,#269088,#269089); +#269087 = CARTESIAN_POINT('',(109.73165,-56.3231,-4.6E-02)); +#269088 = DIRECTION('',(-0.,-0.,-1.)); +#269089 = DIRECTION('',(-0.,-1.,0.)); +#269090 = ADVANCED_FACE('',(#269091),#269102,.F.); +#269091 = FACE_BOUND('',#269092,.T.); +#269092 = EDGE_LOOP('',(#269093,#269094,#269100,#269101)); +#269093 = ORIENTED_EDGE('',*,*,#264657,.T.); +#269094 = ORIENTED_EDGE('',*,*,#269095,.T.); +#269095 = EDGE_CURVE('',#264658,#266557,#269096,.T.); +#269096 = LINE('',#269097,#269098); +#269097 = CARTESIAN_POINT('',(112.27165,-56.8231,-4.6E-02)); +#269098 = VECTOR('',#269099,1.); +#269099 = DIRECTION('',(0.,0.,1.)); +#269100 = ORIENTED_EDGE('',*,*,#266556,.F.); +#269101 = ORIENTED_EDGE('',*,*,#269095,.F.); +#269102 = CYLINDRICAL_SURFACE('',#269103,0.5); +#269103 = AXIS2_PLACEMENT_3D('',#269104,#269105,#269106); +#269104 = CARTESIAN_POINT('',(112.27165,-56.3231,-4.6E-02)); +#269105 = DIRECTION('',(-0.,-0.,-1.)); +#269106 = DIRECTION('',(-0.,-1.,0.)); +#269107 = ADVANCED_FACE('',(#269108),#269119,.F.); +#269108 = FACE_BOUND('',#269109,.T.); +#269109 = EDGE_LOOP('',(#269110,#269111,#269117,#269118)); +#269110 = ORIENTED_EDGE('',*,*,#264668,.T.); +#269111 = ORIENTED_EDGE('',*,*,#269112,.T.); +#269112 = EDGE_CURVE('',#264669,#266568,#269113,.T.); +#269113 = LINE('',#269114,#269115); +#269114 = CARTESIAN_POINT('',(114.81165,-56.8231,-4.6E-02)); +#269115 = VECTOR('',#269116,1.); +#269116 = DIRECTION('',(0.,0.,1.)); +#269117 = ORIENTED_EDGE('',*,*,#266567,.F.); +#269118 = ORIENTED_EDGE('',*,*,#269112,.F.); +#269119 = CYLINDRICAL_SURFACE('',#269120,0.5); +#269120 = AXIS2_PLACEMENT_3D('',#269121,#269122,#269123); +#269121 = CARTESIAN_POINT('',(114.81165,-56.3231,-4.6E-02)); +#269122 = DIRECTION('',(-0.,-0.,-1.)); +#269123 = DIRECTION('',(-0.,-1.,0.)); +#269124 = ADVANCED_FACE('',(#269125),#269136,.F.); +#269125 = FACE_BOUND('',#269126,.T.); +#269126 = EDGE_LOOP('',(#269127,#269128,#269134,#269135)); +#269127 = ORIENTED_EDGE('',*,*,#264679,.T.); +#269128 = ORIENTED_EDGE('',*,*,#269129,.T.); +#269129 = EDGE_CURVE('',#264680,#266579,#269130,.T.); +#269130 = LINE('',#269131,#269132); +#269131 = CARTESIAN_POINT('',(85.19165,-46.9231,-4.6E-02)); +#269132 = VECTOR('',#269133,1.); +#269133 = DIRECTION('',(0.,0.,1.)); +#269134 = ORIENTED_EDGE('',*,*,#266578,.F.); +#269135 = ORIENTED_EDGE('',*,*,#269129,.F.); +#269136 = CYLINDRICAL_SURFACE('',#269137,1.6); +#269137 = AXIS2_PLACEMENT_3D('',#269138,#269139,#269140); +#269138 = CARTESIAN_POINT('',(85.19165,-45.3231,-4.6E-02)); +#269139 = DIRECTION('',(-0.,-0.,-1.)); +#269140 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#269141 = ADVANCED_FACE('',(#269142),#269153,.F.); +#269142 = FACE_BOUND('',#269143,.T.); +#269143 = EDGE_LOOP('',(#269144,#269145,#269151,#269152)); +#269144 = ORIENTED_EDGE('',*,*,#264690,.T.); +#269145 = ORIENTED_EDGE('',*,*,#269146,.T.); +#269146 = EDGE_CURVE('',#264691,#266590,#269147,.T.); +#269147 = LINE('',#269148,#269149); +#269148 = CARTESIAN_POINT('',(98.19165,-46.7981,-4.6E-02)); +#269149 = VECTOR('',#269150,1.); +#269150 = DIRECTION('',(0.,0.,1.)); +#269151 = ORIENTED_EDGE('',*,*,#266589,.F.); +#269152 = ORIENTED_EDGE('',*,*,#269146,.F.); +#269153 = CYLINDRICAL_SURFACE('',#269154,0.475); +#269154 = AXIS2_PLACEMENT_3D('',#269155,#269156,#269157); +#269155 = CARTESIAN_POINT('',(98.19165,-46.3231,-4.6E-02)); +#269156 = DIRECTION('',(-0.,-0.,-1.)); +#269157 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269158 = ADVANCED_FACE('',(#269159),#269170,.F.); +#269159 = FACE_BOUND('',#269160,.T.); +#269160 = EDGE_LOOP('',(#269161,#269162,#269168,#269169)); +#269161 = ORIENTED_EDGE('',*,*,#264701,.T.); +#269162 = ORIENTED_EDGE('',*,*,#269163,.T.); +#269163 = EDGE_CURVE('',#264702,#266601,#269164,.T.); +#269164 = LINE('',#269165,#269166); +#269165 = CARTESIAN_POINT('',(111.19165,-51.9031,-4.6E-02)); +#269166 = VECTOR('',#269167,1.); +#269167 = DIRECTION('',(0.,0.,1.)); +#269168 = ORIENTED_EDGE('',*,*,#266600,.F.); +#269169 = ORIENTED_EDGE('',*,*,#269163,.F.); +#269170 = CYLINDRICAL_SURFACE('',#269171,0.5); +#269171 = AXIS2_PLACEMENT_3D('',#269172,#269173,#269174); +#269172 = CARTESIAN_POINT('',(111.19165,-51.4031,-4.6E-02)); +#269173 = DIRECTION('',(-0.,-0.,-1.)); +#269174 = DIRECTION('',(-0.,-1.,0.)); +#269175 = ADVANCED_FACE('',(#269176),#269187,.F.); +#269176 = FACE_BOUND('',#269177,.T.); +#269177 = EDGE_LOOP('',(#269178,#269179,#269185,#269186)); +#269178 = ORIENTED_EDGE('',*,*,#264712,.T.); +#269179 = ORIENTED_EDGE('',*,*,#269180,.T.); +#269180 = EDGE_CURVE('',#264713,#266612,#269181,.T.); +#269181 = LINE('',#269182,#269183); +#269182 = CARTESIAN_POINT('',(100.69165,-46.7981,-4.6E-02)); +#269183 = VECTOR('',#269184,1.); +#269184 = DIRECTION('',(0.,0.,1.)); +#269185 = ORIENTED_EDGE('',*,*,#266611,.F.); +#269186 = ORIENTED_EDGE('',*,*,#269180,.F.); +#269187 = CYLINDRICAL_SURFACE('',#269188,0.475); +#269188 = AXIS2_PLACEMENT_3D('',#269189,#269190,#269191); +#269189 = CARTESIAN_POINT('',(100.69165,-46.3231,-4.6E-02)); +#269190 = DIRECTION('',(-0.,-0.,-1.)); +#269191 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269192 = ADVANCED_FACE('',(#269193),#269204,.F.); +#269193 = FACE_BOUND('',#269194,.T.); +#269194 = EDGE_LOOP('',(#269195,#269196,#269202,#269203)); +#269195 = ORIENTED_EDGE('',*,*,#264723,.T.); +#269196 = ORIENTED_EDGE('',*,*,#269197,.T.); +#269197 = EDGE_CURVE('',#264724,#266623,#269198,.T.); +#269198 = LINE('',#269199,#269200); +#269199 = CARTESIAN_POINT('',(103.19165,-46.7981,-4.6E-02)); +#269200 = VECTOR('',#269201,1.); +#269201 = DIRECTION('',(0.,0.,1.)); +#269202 = ORIENTED_EDGE('',*,*,#266622,.F.); +#269203 = ORIENTED_EDGE('',*,*,#269197,.F.); +#269204 = CYLINDRICAL_SURFACE('',#269205,0.475); +#269205 = AXIS2_PLACEMENT_3D('',#269206,#269207,#269208); +#269206 = CARTESIAN_POINT('',(103.19165,-46.3231,-4.6E-02)); +#269207 = DIRECTION('',(-0.,-0.,-1.)); +#269208 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269209 = ADVANCED_FACE('',(#269210),#269221,.F.); +#269210 = FACE_BOUND('',#269211,.T.); +#269211 = EDGE_LOOP('',(#269212,#269213,#269219,#269220)); +#269212 = ORIENTED_EDGE('',*,*,#264734,.T.); +#269213 = ORIENTED_EDGE('',*,*,#269214,.T.); +#269214 = EDGE_CURVE('',#264735,#266634,#269215,.T.); +#269215 = LINE('',#269216,#269217); +#269216 = CARTESIAN_POINT('',(105.69165,-46.7981,-4.6E-02)); +#269217 = VECTOR('',#269218,1.); +#269218 = DIRECTION('',(0.,0.,1.)); +#269219 = ORIENTED_EDGE('',*,*,#266633,.F.); +#269220 = ORIENTED_EDGE('',*,*,#269214,.F.); +#269221 = CYLINDRICAL_SURFACE('',#269222,0.475); +#269222 = AXIS2_PLACEMENT_3D('',#269223,#269224,#269225); +#269223 = CARTESIAN_POINT('',(105.69165,-46.3231,-4.6E-02)); +#269224 = DIRECTION('',(-0.,-0.,-1.)); +#269225 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269226 = ADVANCED_FACE('',(#269227),#269238,.F.); +#269227 = FACE_BOUND('',#269228,.T.); +#269228 = EDGE_LOOP('',(#269229,#269230,#269236,#269237)); +#269229 = ORIENTED_EDGE('',*,*,#264745,.T.); +#269230 = ORIENTED_EDGE('',*,*,#269231,.T.); +#269231 = EDGE_CURVE('',#264746,#266645,#269232,.T.); +#269232 = LINE('',#269233,#269234); +#269233 = CARTESIAN_POINT('',(111.19165,-49.3631,-4.6E-02)); +#269234 = VECTOR('',#269235,1.); +#269235 = DIRECTION('',(0.,0.,1.)); +#269236 = ORIENTED_EDGE('',*,*,#266644,.F.); +#269237 = ORIENTED_EDGE('',*,*,#269231,.F.); +#269238 = CYLINDRICAL_SURFACE('',#269239,0.5); +#269239 = AXIS2_PLACEMENT_3D('',#269240,#269241,#269242); +#269240 = CARTESIAN_POINT('',(111.19165,-48.8631,-4.6E-02)); +#269241 = DIRECTION('',(-0.,-0.,-1.)); +#269242 = DIRECTION('',(-0.,-1.,0.)); +#269243 = ADVANCED_FACE('',(#269244),#269255,.F.); +#269244 = FACE_BOUND('',#269245,.T.); +#269245 = EDGE_LOOP('',(#269246,#269247,#269253,#269254)); +#269246 = ORIENTED_EDGE('',*,*,#264756,.T.); +#269247 = ORIENTED_EDGE('',*,*,#269248,.T.); +#269248 = EDGE_CURVE('',#264757,#266656,#269249,.T.); +#269249 = LINE('',#269250,#269251); +#269250 = CARTESIAN_POINT('',(111.19165,-46.8231,-4.6E-02)); +#269251 = VECTOR('',#269252,1.); +#269252 = DIRECTION('',(0.,0.,1.)); +#269253 = ORIENTED_EDGE('',*,*,#266655,.F.); +#269254 = ORIENTED_EDGE('',*,*,#269248,.F.); +#269255 = CYLINDRICAL_SURFACE('',#269256,0.5); +#269256 = AXIS2_PLACEMENT_3D('',#269257,#269258,#269259); +#269257 = CARTESIAN_POINT('',(111.19165,-46.3231,-4.6E-02)); +#269258 = DIRECTION('',(-0.,-0.,-1.)); +#269259 = DIRECTION('',(-0.,-1.,0.)); +#269260 = ADVANCED_FACE('',(#269261),#269272,.F.); +#269261 = FACE_BOUND('',#269262,.T.); +#269262 = EDGE_LOOP('',(#269263,#269264,#269270,#269271)); +#269263 = ORIENTED_EDGE('',*,*,#264767,.T.); +#269264 = ORIENTED_EDGE('',*,*,#269265,.T.); +#269265 = EDGE_CURVE('',#264768,#266667,#269266,.T.); +#269266 = LINE('',#269267,#269268); +#269267 = CARTESIAN_POINT('',(117.35165,-56.8231,-4.6E-02)); +#269268 = VECTOR('',#269269,1.); +#269269 = DIRECTION('',(0.,0.,1.)); +#269270 = ORIENTED_EDGE('',*,*,#266666,.F.); +#269271 = ORIENTED_EDGE('',*,*,#269265,.F.); +#269272 = CYLINDRICAL_SURFACE('',#269273,0.5); +#269273 = AXIS2_PLACEMENT_3D('',#269274,#269275,#269276); +#269274 = CARTESIAN_POINT('',(117.35165,-56.3231,-4.6E-02)); +#269275 = DIRECTION('',(-0.,-0.,-1.)); +#269276 = DIRECTION('',(-0.,-1.,0.)); +#269277 = ADVANCED_FACE('',(#269278),#269289,.F.); +#269278 = FACE_BOUND('',#269279,.T.); +#269279 = EDGE_LOOP('',(#269280,#269281,#269287,#269288)); +#269280 = ORIENTED_EDGE('',*,*,#264778,.T.); +#269281 = ORIENTED_EDGE('',*,*,#269282,.T.); +#269282 = EDGE_CURVE('',#264779,#266678,#269283,.T.); +#269283 = LINE('',#269284,#269285); +#269284 = CARTESIAN_POINT('',(119.89165,-56.8231,-4.6E-02)); +#269285 = VECTOR('',#269286,1.); +#269286 = DIRECTION('',(0.,0.,1.)); +#269287 = ORIENTED_EDGE('',*,*,#266677,.F.); +#269288 = ORIENTED_EDGE('',*,*,#269282,.F.); +#269289 = CYLINDRICAL_SURFACE('',#269290,0.5); +#269290 = AXIS2_PLACEMENT_3D('',#269291,#269292,#269293); +#269291 = CARTESIAN_POINT('',(119.89165,-56.3231,-4.6E-02)); +#269292 = DIRECTION('',(-0.,-0.,-1.)); +#269293 = DIRECTION('',(-0.,-1.,0.)); +#269294 = ADVANCED_FACE('',(#269295),#269306,.F.); +#269295 = FACE_BOUND('',#269296,.T.); +#269296 = EDGE_LOOP('',(#269297,#269298,#269304,#269305)); +#269297 = ORIENTED_EDGE('',*,*,#264789,.T.); +#269298 = ORIENTED_EDGE('',*,*,#269299,.T.); +#269299 = EDGE_CURVE('',#264790,#266689,#269300,.T.); +#269300 = LINE('',#269301,#269302); +#269301 = CARTESIAN_POINT('',(122.43165,-56.8231,-4.6E-02)); +#269302 = VECTOR('',#269303,1.); +#269303 = DIRECTION('',(0.,0.,1.)); +#269304 = ORIENTED_EDGE('',*,*,#266688,.F.); +#269305 = ORIENTED_EDGE('',*,*,#269299,.F.); +#269306 = CYLINDRICAL_SURFACE('',#269307,0.5); +#269307 = AXIS2_PLACEMENT_3D('',#269308,#269309,#269310); +#269308 = CARTESIAN_POINT('',(122.43165,-56.3231,-4.6E-02)); +#269309 = DIRECTION('',(-0.,-0.,-1.)); +#269310 = DIRECTION('',(-0.,-1.,0.)); +#269311 = ADVANCED_FACE('',(#269312),#269323,.F.); +#269312 = FACE_BOUND('',#269313,.T.); +#269313 = EDGE_LOOP('',(#269314,#269315,#269321,#269322)); +#269314 = ORIENTED_EDGE('',*,*,#264800,.T.); +#269315 = ORIENTED_EDGE('',*,*,#269316,.T.); +#269316 = EDGE_CURVE('',#264801,#266700,#269317,.T.); +#269317 = LINE('',#269318,#269319); +#269318 = CARTESIAN_POINT('',(124.97165,-56.8231,-4.6E-02)); +#269319 = VECTOR('',#269320,1.); +#269320 = DIRECTION('',(0.,0.,1.)); +#269321 = ORIENTED_EDGE('',*,*,#266699,.F.); +#269322 = ORIENTED_EDGE('',*,*,#269316,.F.); +#269323 = CYLINDRICAL_SURFACE('',#269324,0.5); +#269324 = AXIS2_PLACEMENT_3D('',#269325,#269326,#269327); +#269325 = CARTESIAN_POINT('',(124.97165,-56.3231,-4.6E-02)); +#269326 = DIRECTION('',(-0.,-0.,-1.)); +#269327 = DIRECTION('',(-0.,-1.,0.)); +#269328 = ADVANCED_FACE('',(#269329),#269340,.F.); +#269329 = FACE_BOUND('',#269330,.T.); +#269330 = EDGE_LOOP('',(#269331,#269332,#269338,#269339)); +#269331 = ORIENTED_EDGE('',*,*,#264811,.T.); +#269332 = ORIENTED_EDGE('',*,*,#269333,.T.); +#269333 = EDGE_CURVE('',#264812,#266711,#269334,.T.); +#269334 = LINE('',#269335,#269336); +#269335 = CARTESIAN_POINT('',(127.51165,-56.8231,-4.6E-02)); +#269336 = VECTOR('',#269337,1.); +#269337 = DIRECTION('',(0.,0.,1.)); +#269338 = ORIENTED_EDGE('',*,*,#266710,.F.); +#269339 = ORIENTED_EDGE('',*,*,#269333,.F.); +#269340 = CYLINDRICAL_SURFACE('',#269341,0.5); +#269341 = AXIS2_PLACEMENT_3D('',#269342,#269343,#269344); +#269342 = CARTESIAN_POINT('',(127.51165,-56.3231,-4.6E-02)); +#269343 = DIRECTION('',(-0.,-0.,-1.)); +#269344 = DIRECTION('',(-0.,-1.,0.)); +#269345 = ADVANCED_FACE('',(#269346),#269357,.F.); +#269346 = FACE_BOUND('',#269347,.T.); +#269347 = EDGE_LOOP('',(#269348,#269349,#269355,#269356)); +#269348 = ORIENTED_EDGE('',*,*,#264822,.T.); +#269349 = ORIENTED_EDGE('',*,*,#269350,.T.); +#269350 = EDGE_CURVE('',#264823,#266722,#269351,.T.); +#269351 = LINE('',#269352,#269353); +#269352 = CARTESIAN_POINT('',(130.05165,-56.8231,-4.6E-02)); +#269353 = VECTOR('',#269354,1.); +#269354 = DIRECTION('',(0.,0.,1.)); +#269355 = ORIENTED_EDGE('',*,*,#266721,.F.); +#269356 = ORIENTED_EDGE('',*,*,#269350,.F.); +#269357 = CYLINDRICAL_SURFACE('',#269358,0.5); +#269358 = AXIS2_PLACEMENT_3D('',#269359,#269360,#269361); +#269359 = CARTESIAN_POINT('',(130.05165,-56.3231,-4.6E-02)); +#269360 = DIRECTION('',(-0.,-0.,-1.)); +#269361 = DIRECTION('',(-0.,-1.,0.)); +#269362 = ADVANCED_FACE('',(#269363),#269374,.F.); +#269363 = FACE_BOUND('',#269364,.T.); +#269364 = EDGE_LOOP('',(#269365,#269366,#269372,#269373)); +#269365 = ORIENTED_EDGE('',*,*,#264833,.T.); +#269366 = ORIENTED_EDGE('',*,*,#269367,.T.); +#269367 = EDGE_CURVE('',#264834,#266733,#269368,.T.); +#269368 = LINE('',#269369,#269370); +#269369 = CARTESIAN_POINT('',(132.59165,-56.8231,-4.6E-02)); +#269370 = VECTOR('',#269371,1.); +#269371 = DIRECTION('',(0.,0.,1.)); +#269372 = ORIENTED_EDGE('',*,*,#266732,.F.); +#269373 = ORIENTED_EDGE('',*,*,#269367,.F.); +#269374 = CYLINDRICAL_SURFACE('',#269375,0.5); +#269375 = AXIS2_PLACEMENT_3D('',#269376,#269377,#269378); +#269376 = CARTESIAN_POINT('',(132.59165,-56.3231,-4.6E-02)); +#269377 = DIRECTION('',(-0.,-0.,-1.)); +#269378 = DIRECTION('',(-0.,-1.,0.)); +#269379 = ADVANCED_FACE('',(#269380),#269391,.F.); +#269380 = FACE_BOUND('',#269381,.T.); +#269381 = EDGE_LOOP('',(#269382,#269383,#269389,#269390)); +#269382 = ORIENTED_EDGE('',*,*,#264844,.T.); +#269383 = ORIENTED_EDGE('',*,*,#269384,.T.); +#269384 = EDGE_CURVE('',#264845,#266744,#269385,.T.); +#269385 = LINE('',#269386,#269387); +#269386 = CARTESIAN_POINT('',(135.13165,-56.8231,-4.6E-02)); +#269387 = VECTOR('',#269388,1.); +#269388 = DIRECTION('',(0.,0.,1.)); +#269389 = ORIENTED_EDGE('',*,*,#266743,.F.); +#269390 = ORIENTED_EDGE('',*,*,#269384,.F.); +#269391 = CYLINDRICAL_SURFACE('',#269392,0.5); +#269392 = AXIS2_PLACEMENT_3D('',#269393,#269394,#269395); +#269393 = CARTESIAN_POINT('',(135.13165,-56.3231,-4.6E-02)); +#269394 = DIRECTION('',(-0.,-0.,-1.)); +#269395 = DIRECTION('',(-0.,-1.,0.)); +#269396 = ADVANCED_FACE('',(#269397),#269408,.F.); +#269397 = FACE_BOUND('',#269398,.T.); +#269398 = EDGE_LOOP('',(#269399,#269400,#269406,#269407)); +#269399 = ORIENTED_EDGE('',*,*,#264855,.T.); +#269400 = ORIENTED_EDGE('',*,*,#269401,.T.); +#269401 = EDGE_CURVE('',#264856,#266755,#269402,.T.); +#269402 = LINE('',#269403,#269404); +#269403 = CARTESIAN_POINT('',(137.67165,-56.8231,-4.6E-02)); +#269404 = VECTOR('',#269405,1.); +#269405 = DIRECTION('',(0.,0.,1.)); +#269406 = ORIENTED_EDGE('',*,*,#266754,.F.); +#269407 = ORIENTED_EDGE('',*,*,#269401,.F.); +#269408 = CYLINDRICAL_SURFACE('',#269409,0.5); +#269409 = AXIS2_PLACEMENT_3D('',#269410,#269411,#269412); +#269410 = CARTESIAN_POINT('',(137.67165,-56.3231,-4.6E-02)); +#269411 = DIRECTION('',(-0.,-0.,-1.)); +#269412 = DIRECTION('',(-0.,-1.,0.)); +#269413 = ADVANCED_FACE('',(#269414),#269425,.F.); +#269414 = FACE_BOUND('',#269415,.T.); +#269415 = EDGE_LOOP('',(#269416,#269417,#269423,#269424)); +#269416 = ORIENTED_EDGE('',*,*,#264866,.T.); +#269417 = ORIENTED_EDGE('',*,*,#269418,.T.); +#269418 = EDGE_CURVE('',#264867,#266766,#269419,.T.); +#269419 = LINE('',#269420,#269421); +#269420 = CARTESIAN_POINT('',(140.21165,-56.8231,-4.6E-02)); +#269421 = VECTOR('',#269422,1.); +#269422 = DIRECTION('',(0.,0.,1.)); +#269423 = ORIENTED_EDGE('',*,*,#266765,.F.); +#269424 = ORIENTED_EDGE('',*,*,#269418,.F.); +#269425 = CYLINDRICAL_SURFACE('',#269426,0.5); +#269426 = AXIS2_PLACEMENT_3D('',#269427,#269428,#269429); +#269427 = CARTESIAN_POINT('',(140.21165,-56.3231,-4.6E-02)); +#269428 = DIRECTION('',(-0.,-0.,-1.)); +#269429 = DIRECTION('',(-0.,-1.,0.)); +#269430 = ADVANCED_FACE('',(#269431),#269442,.F.); +#269431 = FACE_BOUND('',#269432,.T.); +#269432 = EDGE_LOOP('',(#269433,#269434,#269440,#269441)); +#269433 = ORIENTED_EDGE('',*,*,#264877,.T.); +#269434 = ORIENTED_EDGE('',*,*,#269435,.T.); +#269435 = EDGE_CURVE('',#264878,#266777,#269436,.T.); +#269436 = LINE('',#269437,#269438); +#269437 = CARTESIAN_POINT('',(142.75165,-56.8231,-4.6E-02)); +#269438 = VECTOR('',#269439,1.); +#269439 = DIRECTION('',(0.,0.,1.)); +#269440 = ORIENTED_EDGE('',*,*,#266776,.F.); +#269441 = ORIENTED_EDGE('',*,*,#269435,.F.); +#269442 = CYLINDRICAL_SURFACE('',#269443,0.5); +#269443 = AXIS2_PLACEMENT_3D('',#269444,#269445,#269446); +#269444 = CARTESIAN_POINT('',(142.75165,-56.3231,-4.6E-02)); +#269445 = DIRECTION('',(-0.,-0.,-1.)); +#269446 = DIRECTION('',(-0.,-1.,0.)); +#269447 = ADVANCED_FACE('',(#269448),#269459,.F.); +#269448 = FACE_BOUND('',#269449,.T.); +#269449 = EDGE_LOOP('',(#269450,#269451,#269457,#269458)); +#269450 = ORIENTED_EDGE('',*,*,#264888,.T.); +#269451 = ORIENTED_EDGE('',*,*,#269452,.T.); +#269452 = EDGE_CURVE('',#264889,#266788,#269453,.T.); +#269453 = LINE('',#269454,#269455); +#269454 = CARTESIAN_POINT('',(145.29165,-56.8231,-4.6E-02)); +#269455 = VECTOR('',#269456,1.); +#269456 = DIRECTION('',(0.,0.,1.)); +#269457 = ORIENTED_EDGE('',*,*,#266787,.F.); +#269458 = ORIENTED_EDGE('',*,*,#269452,.F.); +#269459 = CYLINDRICAL_SURFACE('',#269460,0.5); +#269460 = AXIS2_PLACEMENT_3D('',#269461,#269462,#269463); +#269461 = CARTESIAN_POINT('',(145.29165,-56.3231,-4.6E-02)); +#269462 = DIRECTION('',(-0.,-0.,-1.)); +#269463 = DIRECTION('',(-0.,-1.,0.)); +#269464 = ADVANCED_FACE('',(#269465),#269476,.F.); +#269465 = FACE_BOUND('',#269466,.T.); +#269466 = EDGE_LOOP('',(#269467,#269468,#269474,#269475)); +#269467 = ORIENTED_EDGE('',*,*,#264899,.T.); +#269468 = ORIENTED_EDGE('',*,*,#269469,.T.); +#269469 = EDGE_CURVE('',#264900,#266799,#269470,.T.); +#269470 = LINE('',#269471,#269472); +#269471 = CARTESIAN_POINT('',(147.83165,-56.8231,-4.6E-02)); +#269472 = VECTOR('',#269473,1.); +#269473 = DIRECTION('',(0.,0.,1.)); +#269474 = ORIENTED_EDGE('',*,*,#266798,.F.); +#269475 = ORIENTED_EDGE('',*,*,#269469,.F.); +#269476 = CYLINDRICAL_SURFACE('',#269477,0.5); +#269477 = AXIS2_PLACEMENT_3D('',#269478,#269479,#269480); +#269478 = CARTESIAN_POINT('',(147.83165,-56.3231,-4.6E-02)); +#269479 = DIRECTION('',(-0.,-0.,-1.)); +#269480 = DIRECTION('',(-0.,-1.,0.)); +#269481 = ADVANCED_FACE('',(#269482),#269493,.F.); +#269482 = FACE_BOUND('',#269483,.T.); +#269483 = EDGE_LOOP('',(#269484,#269485,#269491,#269492)); +#269484 = ORIENTED_EDGE('',*,*,#264910,.T.); +#269485 = ORIENTED_EDGE('',*,*,#269486,.T.); +#269486 = EDGE_CURVE('',#264911,#266810,#269487,.T.); +#269487 = LINE('',#269488,#269489); +#269488 = CARTESIAN_POINT('',(116.19165,-46.7981,-4.6E-02)); +#269489 = VECTOR('',#269490,1.); +#269490 = DIRECTION('',(0.,0.,1.)); +#269491 = ORIENTED_EDGE('',*,*,#266809,.F.); +#269492 = ORIENTED_EDGE('',*,*,#269486,.F.); +#269493 = CYLINDRICAL_SURFACE('',#269494,0.475); +#269494 = AXIS2_PLACEMENT_3D('',#269495,#269496,#269497); +#269495 = CARTESIAN_POINT('',(116.19165,-46.3231,-4.6E-02)); +#269496 = DIRECTION('',(-0.,-0.,-1.)); +#269497 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269498 = ADVANCED_FACE('',(#269499),#269510,.F.); +#269499 = FACE_BOUND('',#269500,.T.); +#269500 = EDGE_LOOP('',(#269501,#269502,#269508,#269509)); +#269501 = ORIENTED_EDGE('',*,*,#264921,.T.); +#269502 = ORIENTED_EDGE('',*,*,#269503,.T.); +#269503 = EDGE_CURVE('',#264922,#266821,#269504,.T.); +#269504 = LINE('',#269505,#269506); +#269505 = CARTESIAN_POINT('',(118.69165,-46.7981,-4.6E-02)); +#269506 = VECTOR('',#269507,1.); +#269507 = DIRECTION('',(0.,0.,1.)); +#269508 = ORIENTED_EDGE('',*,*,#266820,.F.); +#269509 = ORIENTED_EDGE('',*,*,#269503,.F.); +#269510 = CYLINDRICAL_SURFACE('',#269511,0.475); +#269511 = AXIS2_PLACEMENT_3D('',#269512,#269513,#269514); +#269512 = CARTESIAN_POINT('',(118.69165,-46.3231,-4.6E-02)); +#269513 = DIRECTION('',(-0.,-0.,-1.)); +#269514 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269515 = ADVANCED_FACE('',(#269516),#269527,.F.); +#269516 = FACE_BOUND('',#269517,.T.); +#269517 = EDGE_LOOP('',(#269518,#269519,#269525,#269526)); +#269518 = ORIENTED_EDGE('',*,*,#264932,.T.); +#269519 = ORIENTED_EDGE('',*,*,#269520,.T.); +#269520 = EDGE_CURVE('',#264933,#266832,#269521,.T.); +#269521 = LINE('',#269522,#269523); +#269522 = CARTESIAN_POINT('',(121.19165,-46.7981,-4.6E-02)); +#269523 = VECTOR('',#269524,1.); +#269524 = DIRECTION('',(0.,0.,1.)); +#269525 = ORIENTED_EDGE('',*,*,#266831,.F.); +#269526 = ORIENTED_EDGE('',*,*,#269520,.F.); +#269527 = CYLINDRICAL_SURFACE('',#269528,0.475); +#269528 = AXIS2_PLACEMENT_3D('',#269529,#269530,#269531); +#269529 = CARTESIAN_POINT('',(121.19165,-46.3231,-4.6E-02)); +#269530 = DIRECTION('',(-0.,-0.,-1.)); +#269531 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269532 = ADVANCED_FACE('',(#269533),#269544,.F.); +#269533 = FACE_BOUND('',#269534,.T.); +#269534 = EDGE_LOOP('',(#269535,#269536,#269542,#269543)); +#269535 = ORIENTED_EDGE('',*,*,#264943,.T.); +#269536 = ORIENTED_EDGE('',*,*,#269537,.T.); +#269537 = EDGE_CURVE('',#264944,#266843,#269538,.T.); +#269538 = LINE('',#269539,#269540); +#269539 = CARTESIAN_POINT('',(127.19165,-46.8231,-4.6E-02)); +#269540 = VECTOR('',#269541,1.); +#269541 = DIRECTION('',(0.,0.,1.)); +#269542 = ORIENTED_EDGE('',*,*,#266842,.F.); +#269543 = ORIENTED_EDGE('',*,*,#269537,.F.); +#269544 = CYLINDRICAL_SURFACE('',#269545,0.5); +#269545 = AXIS2_PLACEMENT_3D('',#269546,#269547,#269548); +#269546 = CARTESIAN_POINT('',(127.19165,-46.3231,-4.6E-02)); +#269547 = DIRECTION('',(-0.,-0.,-1.)); +#269548 = DIRECTION('',(-0.,-1.,0.)); +#269549 = ADVANCED_FACE('',(#269550),#269561,.F.); +#269550 = FACE_BOUND('',#269551,.T.); +#269551 = EDGE_LOOP('',(#269552,#269553,#269559,#269560)); +#269552 = ORIENTED_EDGE('',*,*,#264954,.T.); +#269553 = ORIENTED_EDGE('',*,*,#269554,.T.); +#269554 = EDGE_CURVE('',#264955,#266854,#269555,.T.); +#269555 = LINE('',#269556,#269557); +#269556 = CARTESIAN_POINT('',(129.69165,-46.8231,-4.6E-02)); +#269557 = VECTOR('',#269558,1.); +#269558 = DIRECTION('',(0.,0.,1.)); +#269559 = ORIENTED_EDGE('',*,*,#266853,.F.); +#269560 = ORIENTED_EDGE('',*,*,#269554,.F.); +#269561 = CYLINDRICAL_SURFACE('',#269562,0.5); +#269562 = AXIS2_PLACEMENT_3D('',#269563,#269564,#269565); +#269563 = CARTESIAN_POINT('',(129.69165,-46.3231,-4.6E-02)); +#269564 = DIRECTION('',(-0.,-0.,-1.)); +#269565 = DIRECTION('',(-0.,-1.,0.)); +#269566 = ADVANCED_FACE('',(#269567),#269578,.F.); +#269567 = FACE_BOUND('',#269568,.T.); +#269568 = EDGE_LOOP('',(#269569,#269570,#269576,#269577)); +#269569 = ORIENTED_EDGE('',*,*,#264965,.T.); +#269570 = ORIENTED_EDGE('',*,*,#269571,.T.); +#269571 = EDGE_CURVE('',#264966,#266865,#269572,.T.); +#269572 = LINE('',#269573,#269574); +#269573 = CARTESIAN_POINT('',(135.79165,-46.8231,-4.6E-02)); +#269574 = VECTOR('',#269575,1.); +#269575 = DIRECTION('',(0.,0.,1.)); +#269576 = ORIENTED_EDGE('',*,*,#266864,.F.); +#269577 = ORIENTED_EDGE('',*,*,#269571,.F.); +#269578 = CYLINDRICAL_SURFACE('',#269579,0.5); +#269579 = AXIS2_PLACEMENT_3D('',#269580,#269581,#269582); +#269580 = CARTESIAN_POINT('',(135.79165,-46.3231,-4.6E-02)); +#269581 = DIRECTION('',(-0.,-0.,-1.)); +#269582 = DIRECTION('',(-0.,-1.,0.)); +#269583 = ADVANCED_FACE('',(#269584),#269595,.F.); +#269584 = FACE_BOUND('',#269585,.T.); +#269585 = EDGE_LOOP('',(#269586,#269587,#269593,#269594)); +#269586 = ORIENTED_EDGE('',*,*,#264976,.T.); +#269587 = ORIENTED_EDGE('',*,*,#269588,.T.); +#269588 = EDGE_CURVE('',#264977,#266876,#269589,.T.); +#269589 = LINE('',#269590,#269591); +#269590 = CARTESIAN_POINT('',(138.29165,-46.8231,-4.6E-02)); +#269591 = VECTOR('',#269592,1.); +#269592 = DIRECTION('',(0.,0.,1.)); +#269593 = ORIENTED_EDGE('',*,*,#266875,.F.); +#269594 = ORIENTED_EDGE('',*,*,#269588,.F.); +#269595 = CYLINDRICAL_SURFACE('',#269596,0.5); +#269596 = AXIS2_PLACEMENT_3D('',#269597,#269598,#269599); +#269597 = CARTESIAN_POINT('',(138.29165,-46.3231,-4.6E-02)); +#269598 = DIRECTION('',(-0.,-0.,-1.)); +#269599 = DIRECTION('',(-0.,-1.,0.)); +#269600 = ADVANCED_FACE('',(#269601),#269612,.F.); +#269601 = FACE_BOUND('',#269602,.T.); +#269602 = EDGE_LOOP('',(#269603,#269604,#269610,#269611)); +#269603 = ORIENTED_EDGE('',*,*,#264987,.T.); +#269604 = ORIENTED_EDGE('',*,*,#269605,.T.); +#269605 = EDGE_CURVE('',#264988,#266887,#269606,.T.); +#269606 = LINE('',#269607,#269608); +#269607 = CARTESIAN_POINT('',(148.27165,-81.8231,-4.6E-02)); +#269608 = VECTOR('',#269609,1.); +#269609 = DIRECTION('',(0.,0.,1.)); +#269610 = ORIENTED_EDGE('',*,*,#266886,.F.); +#269611 = ORIENTED_EDGE('',*,*,#269605,.F.); +#269612 = CYLINDRICAL_SURFACE('',#269613,0.5); +#269613 = AXIS2_PLACEMENT_3D('',#269614,#269615,#269616); +#269614 = CARTESIAN_POINT('',(148.27165,-81.3231,-4.6E-02)); +#269615 = DIRECTION('',(-0.,-0.,-1.)); +#269616 = DIRECTION('',(-0.,-1.,0.)); +#269617 = ADVANCED_FACE('',(#269618),#269629,.F.); +#269618 = FACE_BOUND('',#269619,.T.); +#269619 = EDGE_LOOP('',(#269620,#269621,#269627,#269628)); +#269620 = ORIENTED_EDGE('',*,*,#264998,.T.); +#269621 = ORIENTED_EDGE('',*,*,#269622,.T.); +#269622 = EDGE_CURVE('',#264999,#266898,#269623,.T.); +#269623 = LINE('',#269624,#269625); +#269624 = CARTESIAN_POINT('',(150.81165,-81.8231,-4.6E-02)); +#269625 = VECTOR('',#269626,1.); +#269626 = DIRECTION('',(0.,0.,1.)); +#269627 = ORIENTED_EDGE('',*,*,#266897,.F.); +#269628 = ORIENTED_EDGE('',*,*,#269622,.F.); +#269629 = CYLINDRICAL_SURFACE('',#269630,0.5); +#269630 = AXIS2_PLACEMENT_3D('',#269631,#269632,#269633); +#269631 = CARTESIAN_POINT('',(150.81165,-81.3231,-4.6E-02)); +#269632 = DIRECTION('',(-0.,-0.,-1.)); +#269633 = DIRECTION('',(-0.,-1.,0.)); +#269634 = ADVANCED_FACE('',(#269635),#269646,.F.); +#269635 = FACE_BOUND('',#269636,.T.); +#269636 = EDGE_LOOP('',(#269637,#269638,#269644,#269645)); +#269637 = ORIENTED_EDGE('',*,*,#265009,.T.); +#269638 = ORIENTED_EDGE('',*,*,#269639,.T.); +#269639 = EDGE_CURVE('',#265010,#266909,#269640,.T.); +#269640 = LINE('',#269641,#269642); +#269641 = CARTESIAN_POINT('',(174.19165,-91.2231,-4.6E-02)); +#269642 = VECTOR('',#269643,1.); +#269643 = DIRECTION('',(0.,0.,1.)); +#269644 = ORIENTED_EDGE('',*,*,#266908,.F.); +#269645 = ORIENTED_EDGE('',*,*,#269639,.F.); +#269646 = CYLINDRICAL_SURFACE('',#269647,0.4); +#269647 = AXIS2_PLACEMENT_3D('',#269648,#269649,#269650); +#269648 = CARTESIAN_POINT('',(174.19165,-90.8231,-4.6E-02)); +#269649 = DIRECTION('',(-0.,0.,-1.)); +#269650 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269651 = ADVANCED_FACE('',(#269652),#269663,.F.); +#269652 = FACE_BOUND('',#269653,.T.); +#269653 = EDGE_LOOP('',(#269654,#269655,#269661,#269662)); +#269654 = ORIENTED_EDGE('',*,*,#265020,.T.); +#269655 = ORIENTED_EDGE('',*,*,#269656,.T.); +#269656 = EDGE_CURVE('',#265021,#266920,#269657,.T.); +#269657 = LINE('',#269658,#269659); +#269658 = CARTESIAN_POINT('',(174.19165,-89.2231,-4.6E-02)); +#269659 = VECTOR('',#269660,1.); +#269660 = DIRECTION('',(0.,0.,1.)); +#269661 = ORIENTED_EDGE('',*,*,#266919,.F.); +#269662 = ORIENTED_EDGE('',*,*,#269656,.F.); +#269663 = CYLINDRICAL_SURFACE('',#269664,0.4); +#269664 = AXIS2_PLACEMENT_3D('',#269665,#269666,#269667); +#269665 = CARTESIAN_POINT('',(174.19165,-88.8231,-4.6E-02)); +#269666 = DIRECTION('',(-0.,0.,-1.)); +#269667 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269668 = ADVANCED_FACE('',(#269669),#269680,.F.); +#269669 = FACE_BOUND('',#269670,.T.); +#269670 = EDGE_LOOP('',(#269671,#269672,#269678,#269679)); +#269671 = ORIENTED_EDGE('',*,*,#265031,.T.); +#269672 = ORIENTED_EDGE('',*,*,#269673,.T.); +#269673 = EDGE_CURVE('',#265032,#266931,#269674,.T.); +#269674 = LINE('',#269675,#269676); +#269675 = CARTESIAN_POINT('',(174.19165,-87.2231,-4.6E-02)); +#269676 = VECTOR('',#269677,1.); +#269677 = DIRECTION('',(0.,0.,1.)); +#269678 = ORIENTED_EDGE('',*,*,#266930,.F.); +#269679 = ORIENTED_EDGE('',*,*,#269673,.F.); +#269680 = CYLINDRICAL_SURFACE('',#269681,0.4); +#269681 = AXIS2_PLACEMENT_3D('',#269682,#269683,#269684); +#269682 = CARTESIAN_POINT('',(174.19165,-86.8231,-4.6E-02)); +#269683 = DIRECTION('',(-0.,0.,-1.)); +#269684 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269685 = ADVANCED_FACE('',(#269686),#269697,.F.); +#269686 = FACE_BOUND('',#269687,.T.); +#269687 = EDGE_LOOP('',(#269688,#269689,#269695,#269696)); +#269688 = ORIENTED_EDGE('',*,*,#265042,.T.); +#269689 = ORIENTED_EDGE('',*,*,#269690,.T.); +#269690 = EDGE_CURVE('',#265043,#266942,#269691,.T.); +#269691 = LINE('',#269692,#269693); +#269692 = CARTESIAN_POINT('',(174.19165,-85.2231,-4.6E-02)); +#269693 = VECTOR('',#269694,1.); +#269694 = DIRECTION('',(0.,0.,1.)); +#269695 = ORIENTED_EDGE('',*,*,#266941,.F.); +#269696 = ORIENTED_EDGE('',*,*,#269690,.F.); +#269697 = CYLINDRICAL_SURFACE('',#269698,0.4); +#269698 = AXIS2_PLACEMENT_3D('',#269699,#269700,#269701); +#269699 = CARTESIAN_POINT('',(174.19165,-84.8231,-4.6E-02)); +#269700 = DIRECTION('',(-0.,0.,-1.)); +#269701 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269702 = ADVANCED_FACE('',(#269703),#269714,.F.); +#269703 = FACE_BOUND('',#269704,.T.); +#269704 = EDGE_LOOP('',(#269705,#269706,#269712,#269713)); +#269705 = ORIENTED_EDGE('',*,*,#265053,.T.); +#269706 = ORIENTED_EDGE('',*,*,#269707,.T.); +#269707 = EDGE_CURVE('',#265054,#266953,#269708,.T.); +#269708 = LINE('',#269709,#269710); +#269709 = CARTESIAN_POINT('',(174.19165,-83.2231,-4.6E-02)); +#269710 = VECTOR('',#269711,1.); +#269711 = DIRECTION('',(0.,0.,1.)); +#269712 = ORIENTED_EDGE('',*,*,#266952,.F.); +#269713 = ORIENTED_EDGE('',*,*,#269707,.F.); +#269714 = CYLINDRICAL_SURFACE('',#269715,0.4); +#269715 = AXIS2_PLACEMENT_3D('',#269716,#269717,#269718); +#269716 = CARTESIAN_POINT('',(174.19165,-82.8231,-4.6E-02)); +#269717 = DIRECTION('',(-0.,0.,-1.)); +#269718 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269719 = ADVANCED_FACE('',(#269720),#269731,.F.); +#269720 = FACE_BOUND('',#269721,.T.); +#269721 = EDGE_LOOP('',(#269722,#269723,#269729,#269730)); +#269722 = ORIENTED_EDGE('',*,*,#265064,.T.); +#269723 = ORIENTED_EDGE('',*,*,#269724,.T.); +#269724 = EDGE_CURVE('',#265065,#266964,#269725,.T.); +#269725 = LINE('',#269726,#269727); +#269726 = CARTESIAN_POINT('',(174.19165,-81.2231,-4.6E-02)); +#269727 = VECTOR('',#269728,1.); +#269728 = DIRECTION('',(0.,0.,1.)); +#269729 = ORIENTED_EDGE('',*,*,#266963,.F.); +#269730 = ORIENTED_EDGE('',*,*,#269724,.F.); +#269731 = CYLINDRICAL_SURFACE('',#269732,0.4); +#269732 = AXIS2_PLACEMENT_3D('',#269733,#269734,#269735); +#269733 = CARTESIAN_POINT('',(174.19165,-80.8231,-4.6E-02)); +#269734 = DIRECTION('',(-0.,0.,-1.)); +#269735 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269736 = ADVANCED_FACE('',(#269737),#269748,.F.); +#269737 = FACE_BOUND('',#269738,.T.); +#269738 = EDGE_LOOP('',(#269739,#269740,#269746,#269747)); +#269739 = ORIENTED_EDGE('',*,*,#265075,.T.); +#269740 = ORIENTED_EDGE('',*,*,#269741,.T.); +#269741 = EDGE_CURVE('',#265076,#266975,#269742,.T.); +#269742 = LINE('',#269743,#269744); +#269743 = CARTESIAN_POINT('',(150.37165,-74.6031,-4.6E-02)); +#269744 = VECTOR('',#269745,1.); +#269745 = DIRECTION('',(0.,0.,1.)); +#269746 = ORIENTED_EDGE('',*,*,#266974,.F.); +#269747 = ORIENTED_EDGE('',*,*,#269741,.F.); +#269748 = CYLINDRICAL_SURFACE('',#269749,0.5); +#269749 = AXIS2_PLACEMENT_3D('',#269750,#269751,#269752); +#269750 = CARTESIAN_POINT('',(150.37165,-74.1031,-4.6E-02)); +#269751 = DIRECTION('',(-0.,-0.,-1.)); +#269752 = DIRECTION('',(-0.,-1.,0.)); +#269753 = ADVANCED_FACE('',(#269754),#269765,.F.); +#269754 = FACE_BOUND('',#269755,.T.); +#269755 = EDGE_LOOP('',(#269756,#269757,#269763,#269764)); +#269756 = ORIENTED_EDGE('',*,*,#265086,.T.); +#269757 = ORIENTED_EDGE('',*,*,#269758,.T.); +#269758 = EDGE_CURVE('',#265087,#266986,#269759,.T.); +#269759 = LINE('',#269760,#269761); +#269760 = CARTESIAN_POINT('',(152.91165,-74.6031,-4.6E-02)); +#269761 = VECTOR('',#269762,1.); +#269762 = DIRECTION('',(0.,0.,1.)); +#269763 = ORIENTED_EDGE('',*,*,#266985,.F.); +#269764 = ORIENTED_EDGE('',*,*,#269758,.F.); +#269765 = CYLINDRICAL_SURFACE('',#269766,0.5); +#269766 = AXIS2_PLACEMENT_3D('',#269767,#269768,#269769); +#269767 = CARTESIAN_POINT('',(152.91165,-74.1031,-4.6E-02)); +#269768 = DIRECTION('',(-0.,-0.,-1.)); +#269769 = DIRECTION('',(-0.,-1.,0.)); +#269770 = ADVANCED_FACE('',(#269771),#269782,.F.); +#269771 = FACE_BOUND('',#269772,.T.); +#269772 = EDGE_LOOP('',(#269773,#269774,#269780,#269781)); +#269773 = ORIENTED_EDGE('',*,*,#265097,.T.); +#269774 = ORIENTED_EDGE('',*,*,#269775,.T.); +#269775 = EDGE_CURVE('',#265098,#266997,#269776,.T.); +#269776 = LINE('',#269777,#269778); +#269777 = CARTESIAN_POINT('',(155.45165,-74.6031,-4.6E-02)); +#269778 = VECTOR('',#269779,1.); +#269779 = DIRECTION('',(0.,0.,1.)); +#269780 = ORIENTED_EDGE('',*,*,#266996,.F.); +#269781 = ORIENTED_EDGE('',*,*,#269775,.F.); +#269782 = CYLINDRICAL_SURFACE('',#269783,0.5); +#269783 = AXIS2_PLACEMENT_3D('',#269784,#269785,#269786); +#269784 = CARTESIAN_POINT('',(155.45165,-74.1031,-4.6E-02)); +#269785 = DIRECTION('',(-0.,-0.,-1.)); +#269786 = DIRECTION('',(-0.,-1.,0.)); +#269787 = ADVANCED_FACE('',(#269788),#269799,.F.); +#269788 = FACE_BOUND('',#269789,.T.); +#269789 = EDGE_LOOP('',(#269790,#269791,#269797,#269798)); +#269790 = ORIENTED_EDGE('',*,*,#265108,.T.); +#269791 = ORIENTED_EDGE('',*,*,#269792,.T.); +#269792 = EDGE_CURVE('',#265109,#267008,#269793,.T.); +#269793 = LINE('',#269794,#269795); +#269794 = CARTESIAN_POINT('',(174.19165,-79.2231,-4.6E-02)); +#269795 = VECTOR('',#269796,1.); +#269796 = DIRECTION('',(0.,0.,1.)); +#269797 = ORIENTED_EDGE('',*,*,#267007,.F.); +#269798 = ORIENTED_EDGE('',*,*,#269792,.F.); +#269799 = CYLINDRICAL_SURFACE('',#269800,0.4); +#269800 = AXIS2_PLACEMENT_3D('',#269801,#269802,#269803); +#269801 = CARTESIAN_POINT('',(174.19165,-78.8231,-4.6E-02)); +#269802 = DIRECTION('',(-0.,0.,-1.)); +#269803 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269804 = ADVANCED_FACE('',(#269805),#269816,.F.); +#269805 = FACE_BOUND('',#269806,.T.); +#269806 = EDGE_LOOP('',(#269807,#269808,#269814,#269815)); +#269807 = ORIENTED_EDGE('',*,*,#265119,.T.); +#269808 = ORIENTED_EDGE('',*,*,#269809,.T.); +#269809 = EDGE_CURVE('',#265120,#267019,#269810,.T.); +#269810 = LINE('',#269811,#269812); +#269811 = CARTESIAN_POINT('',(174.19165,-77.2231,-4.6E-02)); +#269812 = VECTOR('',#269813,1.); +#269813 = DIRECTION('',(0.,0.,1.)); +#269814 = ORIENTED_EDGE('',*,*,#267018,.F.); +#269815 = ORIENTED_EDGE('',*,*,#269809,.F.); +#269816 = CYLINDRICAL_SURFACE('',#269817,0.4); +#269817 = AXIS2_PLACEMENT_3D('',#269818,#269819,#269820); +#269818 = CARTESIAN_POINT('',(174.19165,-76.8231,-4.6E-02)); +#269819 = DIRECTION('',(-0.,0.,-1.)); +#269820 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269821 = ADVANCED_FACE('',(#269822),#269833,.F.); +#269822 = FACE_BOUND('',#269823,.T.); +#269823 = EDGE_LOOP('',(#269824,#269825,#269831,#269832)); +#269824 = ORIENTED_EDGE('',*,*,#265130,.T.); +#269825 = ORIENTED_EDGE('',*,*,#269826,.T.); +#269826 = EDGE_CURVE('',#265131,#267030,#269827,.T.); +#269827 = LINE('',#269828,#269829); +#269828 = CARTESIAN_POINT('',(174.19165,-75.2231,-4.6E-02)); +#269829 = VECTOR('',#269830,1.); +#269830 = DIRECTION('',(0.,0.,1.)); +#269831 = ORIENTED_EDGE('',*,*,#267029,.F.); +#269832 = ORIENTED_EDGE('',*,*,#269826,.F.); +#269833 = CYLINDRICAL_SURFACE('',#269834,0.4); +#269834 = AXIS2_PLACEMENT_3D('',#269835,#269836,#269837); +#269835 = CARTESIAN_POINT('',(174.19165,-74.8231,-4.6E-02)); +#269836 = DIRECTION('',(-0.,0.,-1.)); +#269837 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269838 = ADVANCED_FACE('',(#269839),#269850,.F.); +#269839 = FACE_BOUND('',#269840,.T.); +#269840 = EDGE_LOOP('',(#269841,#269842,#269848,#269849)); +#269841 = ORIENTED_EDGE('',*,*,#265141,.T.); +#269842 = ORIENTED_EDGE('',*,*,#269843,.T.); +#269843 = EDGE_CURVE('',#265142,#267041,#269844,.T.); +#269844 = LINE('',#269845,#269846); +#269845 = CARTESIAN_POINT('',(196.54165,-91.2231,-4.6E-02)); +#269846 = VECTOR('',#269847,1.); +#269847 = DIRECTION('',(0.,0.,1.)); +#269848 = ORIENTED_EDGE('',*,*,#267040,.F.); +#269849 = ORIENTED_EDGE('',*,*,#269843,.F.); +#269850 = CYLINDRICAL_SURFACE('',#269851,0.4); +#269851 = AXIS2_PLACEMENT_3D('',#269852,#269853,#269854); +#269852 = CARTESIAN_POINT('',(196.54165,-90.8231,-4.6E-02)); +#269853 = DIRECTION('',(-0.,-0.,-1.)); +#269854 = DIRECTION('',(-0.,-1.,0.)); +#269855 = ADVANCED_FACE('',(#269856),#269867,.F.); +#269856 = FACE_BOUND('',#269857,.T.); +#269857 = EDGE_LOOP('',(#269858,#269859,#269865,#269866)); +#269858 = ORIENTED_EDGE('',*,*,#265152,.T.); +#269859 = ORIENTED_EDGE('',*,*,#269860,.T.); +#269860 = EDGE_CURVE('',#265153,#267052,#269861,.T.); +#269861 = LINE('',#269862,#269863); +#269862 = CARTESIAN_POINT('',(196.54165,-89.2231,-4.6E-02)); +#269863 = VECTOR('',#269864,1.); +#269864 = DIRECTION('',(0.,0.,1.)); +#269865 = ORIENTED_EDGE('',*,*,#267051,.F.); +#269866 = ORIENTED_EDGE('',*,*,#269860,.F.); +#269867 = CYLINDRICAL_SURFACE('',#269868,0.4); +#269868 = AXIS2_PLACEMENT_3D('',#269869,#269870,#269871); +#269869 = CARTESIAN_POINT('',(196.54165,-88.8231,-4.6E-02)); +#269870 = DIRECTION('',(-0.,-0.,-1.)); +#269871 = DIRECTION('',(-0.,-1.,0.)); +#269872 = ADVANCED_FACE('',(#269873),#269884,.F.); +#269873 = FACE_BOUND('',#269874,.T.); +#269874 = EDGE_LOOP('',(#269875,#269876,#269882,#269883)); +#269875 = ORIENTED_EDGE('',*,*,#265163,.T.); +#269876 = ORIENTED_EDGE('',*,*,#269877,.T.); +#269877 = EDGE_CURVE('',#265164,#267063,#269878,.T.); +#269878 = LINE('',#269879,#269880); +#269879 = CARTESIAN_POINT('',(196.54165,-87.2231,-4.6E-02)); +#269880 = VECTOR('',#269881,1.); +#269881 = DIRECTION('',(0.,0.,1.)); +#269882 = ORIENTED_EDGE('',*,*,#267062,.F.); +#269883 = ORIENTED_EDGE('',*,*,#269877,.F.); +#269884 = CYLINDRICAL_SURFACE('',#269885,0.4); +#269885 = AXIS2_PLACEMENT_3D('',#269886,#269887,#269888); +#269886 = CARTESIAN_POINT('',(196.54165,-86.8231,-4.6E-02)); +#269887 = DIRECTION('',(-0.,-0.,-1.)); +#269888 = DIRECTION('',(-0.,-1.,0.)); +#269889 = ADVANCED_FACE('',(#269890),#269901,.F.); +#269890 = FACE_BOUND('',#269891,.T.); +#269891 = EDGE_LOOP('',(#269892,#269893,#269899,#269900)); +#269892 = ORIENTED_EDGE('',*,*,#265174,.T.); +#269893 = ORIENTED_EDGE('',*,*,#269894,.T.); +#269894 = EDGE_CURVE('',#265175,#267074,#269895,.T.); +#269895 = LINE('',#269896,#269897); +#269896 = CARTESIAN_POINT('',(196.54165,-85.2231,-4.6E-02)); +#269897 = VECTOR('',#269898,1.); +#269898 = DIRECTION('',(0.,0.,1.)); +#269899 = ORIENTED_EDGE('',*,*,#267073,.F.); +#269900 = ORIENTED_EDGE('',*,*,#269894,.F.); +#269901 = CYLINDRICAL_SURFACE('',#269902,0.4); +#269902 = AXIS2_PLACEMENT_3D('',#269903,#269904,#269905); +#269903 = CARTESIAN_POINT('',(196.54165,-84.8231,-4.6E-02)); +#269904 = DIRECTION('',(-0.,-0.,-1.)); +#269905 = DIRECTION('',(-0.,-1.,0.)); +#269906 = ADVANCED_FACE('',(#269907),#269918,.F.); +#269907 = FACE_BOUND('',#269908,.T.); +#269908 = EDGE_LOOP('',(#269909,#269910,#269916,#269917)); +#269909 = ORIENTED_EDGE('',*,*,#265185,.T.); +#269910 = ORIENTED_EDGE('',*,*,#269911,.T.); +#269911 = EDGE_CURVE('',#265186,#267085,#269912,.T.); +#269912 = LINE('',#269913,#269914); +#269913 = CARTESIAN_POINT('',(196.54165,-83.2231,-4.6E-02)); +#269914 = VECTOR('',#269915,1.); +#269915 = DIRECTION('',(0.,0.,1.)); +#269916 = ORIENTED_EDGE('',*,*,#267084,.F.); +#269917 = ORIENTED_EDGE('',*,*,#269911,.F.); +#269918 = CYLINDRICAL_SURFACE('',#269919,0.4); +#269919 = AXIS2_PLACEMENT_3D('',#269920,#269921,#269922); +#269920 = CARTESIAN_POINT('',(196.54165,-82.8231,-4.6E-02)); +#269921 = DIRECTION('',(-0.,-0.,-1.)); +#269922 = DIRECTION('',(-0.,-1.,0.)); +#269923 = ADVANCED_FACE('',(#269924),#269935,.F.); +#269924 = FACE_BOUND('',#269925,.T.); +#269925 = EDGE_LOOP('',(#269926,#269927,#269933,#269934)); +#269926 = ORIENTED_EDGE('',*,*,#265196,.T.); +#269927 = ORIENTED_EDGE('',*,*,#269928,.T.); +#269928 = EDGE_CURVE('',#265197,#267096,#269929,.T.); +#269929 = LINE('',#269930,#269931); +#269930 = CARTESIAN_POINT('',(196.54165,-81.2231,-4.6E-02)); +#269931 = VECTOR('',#269932,1.); +#269932 = DIRECTION('',(0.,0.,1.)); +#269933 = ORIENTED_EDGE('',*,*,#267095,.F.); +#269934 = ORIENTED_EDGE('',*,*,#269928,.F.); +#269935 = CYLINDRICAL_SURFACE('',#269936,0.4); +#269936 = AXIS2_PLACEMENT_3D('',#269937,#269938,#269939); +#269937 = CARTESIAN_POINT('',(196.54165,-80.8231,-4.6E-02)); +#269938 = DIRECTION('',(-0.,-0.,-1.)); +#269939 = DIRECTION('',(-0.,-1.,0.)); +#269940 = ADVANCED_FACE('',(#269941),#269952,.F.); +#269941 = FACE_BOUND('',#269942,.T.); +#269942 = EDGE_LOOP('',(#269943,#269944,#269950,#269951)); +#269943 = ORIENTED_EDGE('',*,*,#265207,.T.); +#269944 = ORIENTED_EDGE('',*,*,#269945,.T.); +#269945 = EDGE_CURVE('',#265208,#267107,#269946,.T.); +#269946 = LINE('',#269947,#269948); +#269947 = CARTESIAN_POINT('',(210.19165,-90.7981,-4.6E-02)); +#269948 = VECTOR('',#269949,1.); +#269949 = DIRECTION('',(0.,0.,1.)); +#269950 = ORIENTED_EDGE('',*,*,#267106,.F.); +#269951 = ORIENTED_EDGE('',*,*,#269945,.F.); +#269952 = CYLINDRICAL_SURFACE('',#269953,0.475); +#269953 = AXIS2_PLACEMENT_3D('',#269954,#269955,#269956); +#269954 = CARTESIAN_POINT('',(210.19165,-90.3231,-4.6E-02)); +#269955 = DIRECTION('',(-0.,0.,-1.)); +#269956 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#269957 = ADVANCED_FACE('',(#269958),#269969,.F.); +#269958 = FACE_BOUND('',#269959,.T.); +#269959 = EDGE_LOOP('',(#269960,#269961,#269967,#269968)); +#269960 = ORIENTED_EDGE('',*,*,#265218,.T.); +#269961 = ORIENTED_EDGE('',*,*,#269962,.T.); +#269962 = EDGE_CURVE('',#265219,#267118,#269963,.T.); +#269963 = LINE('',#269964,#269965); +#269964 = CARTESIAN_POINT('',(210.19165,-88.2981,-4.6E-02)); +#269965 = VECTOR('',#269966,1.); +#269966 = DIRECTION('',(0.,0.,1.)); +#269967 = ORIENTED_EDGE('',*,*,#267117,.F.); +#269968 = ORIENTED_EDGE('',*,*,#269962,.F.); +#269969 = CYLINDRICAL_SURFACE('',#269970,0.475); +#269970 = AXIS2_PLACEMENT_3D('',#269971,#269972,#269973); +#269971 = CARTESIAN_POINT('',(210.19165,-87.8231,-4.6E-02)); +#269972 = DIRECTION('',(-0.,0.,-1.)); +#269973 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#269974 = ADVANCED_FACE('',(#269975),#269986,.F.); +#269975 = FACE_BOUND('',#269976,.T.); +#269976 = EDGE_LOOP('',(#269977,#269978,#269984,#269985)); +#269977 = ORIENTED_EDGE('',*,*,#265229,.T.); +#269978 = ORIENTED_EDGE('',*,*,#269979,.T.); +#269979 = EDGE_CURVE('',#265230,#267129,#269980,.T.); +#269980 = LINE('',#269981,#269982); +#269981 = CARTESIAN_POINT('',(210.16665,-80.5731,-4.6E-02)); +#269982 = VECTOR('',#269983,1.); +#269983 = DIRECTION('',(0.,0.,1.)); +#269984 = ORIENTED_EDGE('',*,*,#267128,.F.); +#269985 = ORIENTED_EDGE('',*,*,#269979,.F.); +#269986 = CYLINDRICAL_SURFACE('',#269987,0.5); +#269987 = AXIS2_PLACEMENT_3D('',#269988,#269989,#269990); +#269988 = CARTESIAN_POINT('',(210.16665,-80.0731,-4.6E-02)); +#269989 = DIRECTION('',(-0.,-0.,-1.)); +#269990 = DIRECTION('',(-0.,-1.,0.)); +#269991 = ADVANCED_FACE('',(#269992),#270003,.F.); +#269992 = FACE_BOUND('',#269993,.T.); +#269993 = EDGE_LOOP('',(#269994,#269995,#270001,#270002)); +#269994 = ORIENTED_EDGE('',*,*,#265240,.T.); +#269995 = ORIENTED_EDGE('',*,*,#269996,.T.); +#269996 = EDGE_CURVE('',#265241,#267140,#269997,.T.); +#269997 = LINE('',#269998,#269999); +#269998 = CARTESIAN_POINT('',(196.54165,-79.2231,-4.6E-02)); +#269999 = VECTOR('',#270000,1.); +#270000 = DIRECTION('',(0.,0.,1.)); +#270001 = ORIENTED_EDGE('',*,*,#267139,.F.); +#270002 = ORIENTED_EDGE('',*,*,#269996,.F.); +#270003 = CYLINDRICAL_SURFACE('',#270004,0.4); +#270004 = AXIS2_PLACEMENT_3D('',#270005,#270006,#270007); +#270005 = CARTESIAN_POINT('',(196.54165,-78.8231,-4.6E-02)); +#270006 = DIRECTION('',(-0.,-0.,-1.)); +#270007 = DIRECTION('',(-0.,-1.,0.)); +#270008 = ADVANCED_FACE('',(#270009),#270020,.F.); +#270009 = FACE_BOUND('',#270010,.T.); +#270010 = EDGE_LOOP('',(#270011,#270012,#270018,#270019)); +#270011 = ORIENTED_EDGE('',*,*,#265251,.T.); +#270012 = ORIENTED_EDGE('',*,*,#270013,.T.); +#270013 = EDGE_CURVE('',#265252,#267151,#270014,.T.); +#270014 = LINE('',#270015,#270016); +#270015 = CARTESIAN_POINT('',(196.54165,-77.2231,-4.6E-02)); +#270016 = VECTOR('',#270017,1.); +#270017 = DIRECTION('',(0.,0.,1.)); +#270018 = ORIENTED_EDGE('',*,*,#267150,.F.); +#270019 = ORIENTED_EDGE('',*,*,#270013,.F.); +#270020 = CYLINDRICAL_SURFACE('',#270021,0.4); +#270021 = AXIS2_PLACEMENT_3D('',#270022,#270023,#270024); +#270022 = CARTESIAN_POINT('',(196.54165,-76.8231,-4.6E-02)); +#270023 = DIRECTION('',(-0.,-0.,-1.)); +#270024 = DIRECTION('',(-0.,-1.,0.)); +#270025 = ADVANCED_FACE('',(#270026),#270037,.F.); +#270026 = FACE_BOUND('',#270027,.T.); +#270027 = EDGE_LOOP('',(#270028,#270029,#270035,#270036)); +#270028 = ORIENTED_EDGE('',*,*,#265262,.T.); +#270029 = ORIENTED_EDGE('',*,*,#270030,.T.); +#270030 = EDGE_CURVE('',#265263,#267162,#270031,.T.); +#270031 = LINE('',#270032,#270033); +#270032 = CARTESIAN_POINT('',(196.54165,-75.2231,-4.6E-02)); +#270033 = VECTOR('',#270034,1.); +#270034 = DIRECTION('',(0.,0.,1.)); +#270035 = ORIENTED_EDGE('',*,*,#267161,.F.); +#270036 = ORIENTED_EDGE('',*,*,#270030,.F.); +#270037 = CYLINDRICAL_SURFACE('',#270038,0.4); +#270038 = AXIS2_PLACEMENT_3D('',#270039,#270040,#270041); +#270039 = CARTESIAN_POINT('',(196.54165,-74.8231,-4.6E-02)); +#270040 = DIRECTION('',(-0.,-0.,-1.)); +#270041 = DIRECTION('',(-0.,-1.,0.)); +#270042 = ADVANCED_FACE('',(#270043),#270054,.F.); +#270043 = FACE_BOUND('',#270044,.T.); +#270044 = EDGE_LOOP('',(#270045,#270046,#270052,#270053)); +#270045 = ORIENTED_EDGE('',*,*,#265273,.T.); +#270046 = ORIENTED_EDGE('',*,*,#270047,.T.); +#270047 = EDGE_CURVE('',#265274,#267173,#270048,.T.); +#270048 = LINE('',#270049,#270050); +#270049 = CARTESIAN_POINT('',(210.16665,-78.0731,-4.6E-02)); +#270050 = VECTOR('',#270051,1.); +#270051 = DIRECTION('',(0.,0.,1.)); +#270052 = ORIENTED_EDGE('',*,*,#267172,.F.); +#270053 = ORIENTED_EDGE('',*,*,#270047,.F.); +#270054 = CYLINDRICAL_SURFACE('',#270055,0.5); +#270055 = AXIS2_PLACEMENT_3D('',#270056,#270057,#270058); +#270056 = CARTESIAN_POINT('',(210.16665,-77.5731,-4.6E-02)); +#270057 = DIRECTION('',(-0.,-0.,-1.)); +#270058 = DIRECTION('',(-0.,-1.,0.)); +#270059 = ADVANCED_FACE('',(#270060),#270071,.F.); +#270060 = FACE_BOUND('',#270061,.T.); +#270061 = EDGE_LOOP('',(#270062,#270063,#270069,#270070)); +#270062 = ORIENTED_EDGE('',*,*,#265284,.T.); +#270063 = ORIENTED_EDGE('',*,*,#270064,.T.); +#270064 = EDGE_CURVE('',#265285,#267184,#270065,.T.); +#270065 = LINE('',#270066,#270067); +#270066 = CARTESIAN_POINT('',(210.16665,-71.3231,-4.6E-02)); +#270067 = VECTOR('',#270068,1.); +#270068 = DIRECTION('',(0.,0.,1.)); +#270069 = ORIENTED_EDGE('',*,*,#267183,.F.); +#270070 = ORIENTED_EDGE('',*,*,#270064,.F.); +#270071 = CYLINDRICAL_SURFACE('',#270072,0.5); +#270072 = AXIS2_PLACEMENT_3D('',#270073,#270074,#270075); +#270073 = CARTESIAN_POINT('',(210.16665,-70.8231,-4.6E-02)); +#270074 = DIRECTION('',(-0.,-0.,-1.)); +#270075 = DIRECTION('',(-0.,-1.,0.)); +#270076 = ADVANCED_FACE('',(#270077),#270088,.F.); +#270077 = FACE_BOUND('',#270078,.T.); +#270078 = EDGE_LOOP('',(#270079,#270080,#270086,#270087)); +#270079 = ORIENTED_EDGE('',*,*,#265295,.T.); +#270080 = ORIENTED_EDGE('',*,*,#270081,.T.); +#270081 = EDGE_CURVE('',#265296,#267195,#270082,.T.); +#270082 = LINE('',#270083,#270084); +#270083 = CARTESIAN_POINT('',(210.16665,-68.8231,-4.6E-02)); +#270084 = VECTOR('',#270085,1.); +#270085 = DIRECTION('',(0.,0.,1.)); +#270086 = ORIENTED_EDGE('',*,*,#267194,.F.); +#270087 = ORIENTED_EDGE('',*,*,#270081,.F.); +#270088 = CYLINDRICAL_SURFACE('',#270089,0.5); +#270089 = AXIS2_PLACEMENT_3D('',#270090,#270091,#270092); +#270090 = CARTESIAN_POINT('',(210.16665,-68.3231,-4.6E-02)); +#270091 = DIRECTION('',(-0.,-0.,-1.)); +#270092 = DIRECTION('',(-0.,-1.,0.)); +#270093 = ADVANCED_FACE('',(#270094),#270105,.F.); +#270094 = FACE_BOUND('',#270095,.T.); +#270095 = EDGE_LOOP('',(#270096,#270097,#270103,#270104)); +#270096 = ORIENTED_EDGE('',*,*,#265306,.T.); +#270097 = ORIENTED_EDGE('',*,*,#270098,.T.); +#270098 = EDGE_CURVE('',#265307,#267206,#270099,.T.); +#270099 = LINE('',#270100,#270101); +#270100 = CARTESIAN_POINT('',(150.37165,-56.8231,-4.6E-02)); +#270101 = VECTOR('',#270102,1.); +#270102 = DIRECTION('',(0.,0.,1.)); +#270103 = ORIENTED_EDGE('',*,*,#267205,.F.); +#270104 = ORIENTED_EDGE('',*,*,#270098,.F.); +#270105 = CYLINDRICAL_SURFACE('',#270106,0.5); +#270106 = AXIS2_PLACEMENT_3D('',#270107,#270108,#270109); +#270107 = CARTESIAN_POINT('',(150.37165,-56.3231,-4.6E-02)); +#270108 = DIRECTION('',(-0.,-0.,-1.)); +#270109 = DIRECTION('',(-0.,-1.,0.)); +#270110 = ADVANCED_FACE('',(#270111),#270122,.F.); +#270111 = FACE_BOUND('',#270112,.T.); +#270112 = EDGE_LOOP('',(#270113,#270114,#270120,#270121)); +#270113 = ORIENTED_EDGE('',*,*,#265317,.T.); +#270114 = ORIENTED_EDGE('',*,*,#270115,.T.); +#270115 = EDGE_CURVE('',#265318,#267217,#270116,.T.); +#270116 = LINE('',#270117,#270118); +#270117 = CARTESIAN_POINT('',(152.91165,-56.8231,-4.6E-02)); +#270118 = VECTOR('',#270119,1.); +#270119 = DIRECTION('',(0.,0.,1.)); +#270120 = ORIENTED_EDGE('',*,*,#267216,.F.); +#270121 = ORIENTED_EDGE('',*,*,#270115,.F.); +#270122 = CYLINDRICAL_SURFACE('',#270123,0.5); +#270123 = AXIS2_PLACEMENT_3D('',#270124,#270125,#270126); +#270124 = CARTESIAN_POINT('',(152.91165,-56.3231,-4.6E-02)); +#270125 = DIRECTION('',(-0.,-0.,-1.)); +#270126 = DIRECTION('',(-0.,-1.,0.)); +#270127 = ADVANCED_FACE('',(#270128),#270139,.F.); +#270128 = FACE_BOUND('',#270129,.T.); +#270129 = EDGE_LOOP('',(#270130,#270131,#270137,#270138)); +#270130 = ORIENTED_EDGE('',*,*,#265328,.T.); +#270131 = ORIENTED_EDGE('',*,*,#270132,.T.); +#270132 = EDGE_CURVE('',#265329,#267228,#270133,.T.); +#270133 = LINE('',#270134,#270135); +#270134 = CARTESIAN_POINT('',(155.45165,-56.8231,-4.6E-02)); +#270135 = VECTOR('',#270136,1.); +#270136 = DIRECTION('',(0.,0.,1.)); +#270137 = ORIENTED_EDGE('',*,*,#267227,.F.); +#270138 = ORIENTED_EDGE('',*,*,#270132,.F.); +#270139 = CYLINDRICAL_SURFACE('',#270140,0.5); +#270140 = AXIS2_PLACEMENT_3D('',#270141,#270142,#270143); +#270141 = CARTESIAN_POINT('',(155.45165,-56.3231,-4.6E-02)); +#270142 = DIRECTION('',(-0.,-0.,-1.)); +#270143 = DIRECTION('',(-0.,-1.,0.)); +#270144 = ADVANCED_FACE('',(#270145),#270156,.F.); +#270145 = FACE_BOUND('',#270146,.T.); +#270146 = EDGE_LOOP('',(#270147,#270148,#270154,#270155)); +#270147 = ORIENTED_EDGE('',*,*,#265339,.T.); +#270148 = ORIENTED_EDGE('',*,*,#270149,.T.); +#270149 = EDGE_CURVE('',#265340,#267239,#270150,.T.); +#270150 = LINE('',#270151,#270152); +#270151 = CARTESIAN_POINT('',(189.28415,-66.5256,-4.6E-02)); +#270152 = VECTOR('',#270153,1.); +#270153 = DIRECTION('',(0.,0.,1.)); +#270154 = ORIENTED_EDGE('',*,*,#267238,.F.); +#270155 = ORIENTED_EDGE('',*,*,#270149,.F.); +#270156 = CYLINDRICAL_SURFACE('',#270157,0.5); +#270157 = AXIS2_PLACEMENT_3D('',#270158,#270159,#270160); +#270158 = CARTESIAN_POINT('',(189.28415,-66.0256,-4.6E-02)); +#270159 = DIRECTION('',(-0.,-0.,-1.)); +#270160 = DIRECTION('',(-0.,-1.,0.)); +#270161 = ADVANCED_FACE('',(#270162),#270173,.F.); +#270162 = FACE_BOUND('',#270163,.T.); +#270163 = EDGE_LOOP('',(#270164,#270165,#270171,#270172)); +#270164 = ORIENTED_EDGE('',*,*,#265350,.T.); +#270165 = ORIENTED_EDGE('',*,*,#270166,.T.); +#270166 = EDGE_CURVE('',#265351,#267250,#270167,.T.); +#270167 = LINE('',#270168,#270169); +#270168 = CARTESIAN_POINT('',(194.36415,-66.5256,-4.6E-02)); +#270169 = VECTOR('',#270170,1.); +#270170 = DIRECTION('',(0.,0.,1.)); +#270171 = ORIENTED_EDGE('',*,*,#267249,.F.); +#270172 = ORIENTED_EDGE('',*,*,#270166,.F.); +#270173 = CYLINDRICAL_SURFACE('',#270174,0.5); +#270174 = AXIS2_PLACEMENT_3D('',#270175,#270176,#270177); +#270175 = CARTESIAN_POINT('',(194.36415,-66.0256,-4.6E-02)); +#270176 = DIRECTION('',(-0.,-0.,-1.)); +#270177 = DIRECTION('',(-0.,-1.,0.)); +#270178 = ADVANCED_FACE('',(#270179),#270190,.F.); +#270179 = FACE_BOUND('',#270180,.T.); +#270180 = EDGE_LOOP('',(#270181,#270182,#270188,#270189)); +#270181 = ORIENTED_EDGE('',*,*,#265361,.T.); +#270182 = ORIENTED_EDGE('',*,*,#270183,.T.); +#270183 = EDGE_CURVE('',#265362,#267261,#270184,.T.); +#270184 = LINE('',#270185,#270186); +#270185 = CARTESIAN_POINT('',(189.28415,-58.9056,-4.6E-02)); +#270186 = VECTOR('',#270187,1.); +#270187 = DIRECTION('',(0.,0.,1.)); +#270188 = ORIENTED_EDGE('',*,*,#267260,.F.); +#270189 = ORIENTED_EDGE('',*,*,#270183,.F.); +#270190 = CYLINDRICAL_SURFACE('',#270191,0.5); +#270191 = AXIS2_PLACEMENT_3D('',#270192,#270193,#270194); +#270192 = CARTESIAN_POINT('',(189.28415,-58.4056,-4.6E-02)); +#270193 = DIRECTION('',(-0.,-0.,-1.)); +#270194 = DIRECTION('',(-0.,-1.,0.)); +#270195 = ADVANCED_FACE('',(#270196),#270207,.F.); +#270196 = FACE_BOUND('',#270197,.T.); +#270197 = EDGE_LOOP('',(#270198,#270199,#270205,#270206)); +#270198 = ORIENTED_EDGE('',*,*,#265372,.T.); +#270199 = ORIENTED_EDGE('',*,*,#270200,.T.); +#270200 = EDGE_CURVE('',#265373,#267272,#270201,.T.); +#270201 = LINE('',#270202,#270203); +#270202 = CARTESIAN_POINT('',(189.28415,-56.3656,-4.6E-02)); +#270203 = VECTOR('',#270204,1.); +#270204 = DIRECTION('',(0.,0.,1.)); +#270205 = ORIENTED_EDGE('',*,*,#267271,.F.); +#270206 = ORIENTED_EDGE('',*,*,#270200,.F.); +#270207 = CYLINDRICAL_SURFACE('',#270208,0.5); +#270208 = AXIS2_PLACEMENT_3D('',#270209,#270210,#270211); +#270209 = CARTESIAN_POINT('',(189.28415,-55.8656,-4.6E-02)); +#270210 = DIRECTION('',(-0.,-0.,-1.)); +#270211 = DIRECTION('',(-0.,-1.,0.)); +#270212 = ADVANCED_FACE('',(#270213),#270224,.F.); +#270213 = FACE_BOUND('',#270214,.T.); +#270214 = EDGE_LOOP('',(#270215,#270216,#270222,#270223)); +#270215 = ORIENTED_EDGE('',*,*,#265383,.T.); +#270216 = ORIENTED_EDGE('',*,*,#270217,.T.); +#270217 = EDGE_CURVE('',#265384,#267283,#270218,.T.); +#270218 = LINE('',#270219,#270220); +#270219 = CARTESIAN_POINT('',(194.36415,-58.9056,-4.6E-02)); +#270220 = VECTOR('',#270221,1.); +#270221 = DIRECTION('',(0.,0.,1.)); +#270222 = ORIENTED_EDGE('',*,*,#267282,.F.); +#270223 = ORIENTED_EDGE('',*,*,#270217,.F.); +#270224 = CYLINDRICAL_SURFACE('',#270225,0.5); +#270225 = AXIS2_PLACEMENT_3D('',#270226,#270227,#270228); +#270226 = CARTESIAN_POINT('',(194.36415,-58.4056,-4.6E-02)); +#270227 = DIRECTION('',(-0.,-0.,-1.)); +#270228 = DIRECTION('',(-0.,-1.,0.)); +#270229 = ADVANCED_FACE('',(#270230),#270241,.F.); +#270230 = FACE_BOUND('',#270231,.T.); +#270231 = EDGE_LOOP('',(#270232,#270233,#270239,#270240)); +#270232 = ORIENTED_EDGE('',*,*,#265394,.T.); +#270233 = ORIENTED_EDGE('',*,*,#270234,.T.); +#270234 = EDGE_CURVE('',#265395,#267294,#270235,.T.); +#270235 = LINE('',#270236,#270237); +#270236 = CARTESIAN_POINT('',(194.36415,-56.3656,-4.6E-02)); +#270237 = VECTOR('',#270238,1.); +#270238 = DIRECTION('',(0.,0.,1.)); +#270239 = ORIENTED_EDGE('',*,*,#267293,.F.); +#270240 = ORIENTED_EDGE('',*,*,#270234,.F.); +#270241 = CYLINDRICAL_SURFACE('',#270242,0.5); +#270242 = AXIS2_PLACEMENT_3D('',#270243,#270244,#270245); +#270243 = CARTESIAN_POINT('',(194.36415,-55.8656,-4.6E-02)); +#270244 = DIRECTION('',(-0.,-0.,-1.)); +#270245 = DIRECTION('',(-0.,-1.,0.)); +#270246 = ADVANCED_FACE('',(#270247),#270258,.F.); +#270247 = FACE_BOUND('',#270248,.T.); +#270248 = EDGE_LOOP('',(#270249,#270250,#270256,#270257)); +#270249 = ORIENTED_EDGE('',*,*,#265405,.T.); +#270250 = ORIENTED_EDGE('',*,*,#270251,.T.); +#270251 = EDGE_CURVE('',#265406,#267305,#270252,.T.); +#270252 = LINE('',#270253,#270254); +#270253 = CARTESIAN_POINT('',(210.19165,-62.2981,-4.6E-02)); +#270254 = VECTOR('',#270255,1.); +#270255 = DIRECTION('',(0.,0.,1.)); +#270256 = ORIENTED_EDGE('',*,*,#267304,.F.); +#270257 = ORIENTED_EDGE('',*,*,#270251,.F.); +#270258 = CYLINDRICAL_SURFACE('',#270259,0.475); +#270259 = AXIS2_PLACEMENT_3D('',#270260,#270261,#270262); +#270260 = CARTESIAN_POINT('',(210.19165,-61.8231,-4.6E-02)); +#270261 = DIRECTION('',(-0.,0.,-1.)); +#270262 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270263 = ADVANCED_FACE('',(#270264),#270275,.F.); +#270264 = FACE_BOUND('',#270265,.T.); +#270265 = EDGE_LOOP('',(#270266,#270267,#270273,#270274)); +#270266 = ORIENTED_EDGE('',*,*,#265416,.T.); +#270267 = ORIENTED_EDGE('',*,*,#270268,.T.); +#270268 = EDGE_CURVE('',#265417,#267316,#270269,.T.); +#270269 = LINE('',#270270,#270271); +#270270 = CARTESIAN_POINT('',(210.19165,-59.7981,-4.6E-02)); +#270271 = VECTOR('',#270272,1.); +#270272 = DIRECTION('',(0.,0.,1.)); +#270273 = ORIENTED_EDGE('',*,*,#267315,.F.); +#270274 = ORIENTED_EDGE('',*,*,#270268,.F.); +#270275 = CYLINDRICAL_SURFACE('',#270276,0.475); +#270276 = AXIS2_PLACEMENT_3D('',#270277,#270278,#270279); +#270277 = CARTESIAN_POINT('',(210.19165,-59.3231,-4.6E-02)); +#270278 = DIRECTION('',(-0.,0.,-1.)); +#270279 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270280 = ADVANCED_FACE('',(#270281),#270292,.F.); +#270281 = FACE_BOUND('',#270282,.T.); +#270282 = EDGE_LOOP('',(#270283,#270284,#270290,#270291)); +#270283 = ORIENTED_EDGE('',*,*,#265427,.T.); +#270284 = ORIENTED_EDGE('',*,*,#270285,.T.); +#270285 = EDGE_CURVE('',#265428,#267327,#270286,.T.); +#270286 = LINE('',#270287,#270288); +#270287 = CARTESIAN_POINT('',(210.19165,-57.2981,-4.6E-02)); +#270288 = VECTOR('',#270289,1.); +#270289 = DIRECTION('',(0.,0.,1.)); +#270290 = ORIENTED_EDGE('',*,*,#267326,.F.); +#270291 = ORIENTED_EDGE('',*,*,#270285,.F.); +#270292 = CYLINDRICAL_SURFACE('',#270293,0.475); +#270293 = AXIS2_PLACEMENT_3D('',#270294,#270295,#270296); +#270294 = CARTESIAN_POINT('',(210.19165,-56.8231,-4.6E-02)); +#270295 = DIRECTION('',(-0.,0.,-1.)); +#270296 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270297 = ADVANCED_FACE('',(#270298),#270309,.F.); +#270298 = FACE_BOUND('',#270299,.T.); +#270299 = EDGE_LOOP('',(#270300,#270301,#270307,#270308)); +#270300 = ORIENTED_EDGE('',*,*,#265438,.T.); +#270301 = ORIENTED_EDGE('',*,*,#270302,.T.); +#270302 = EDGE_CURVE('',#265439,#267338,#270303,.T.); +#270303 = LINE('',#270304,#270305); +#270304 = CARTESIAN_POINT('',(210.19165,-54.7981,-4.6E-02)); +#270305 = VECTOR('',#270306,1.); +#270306 = DIRECTION('',(0.,0.,1.)); +#270307 = ORIENTED_EDGE('',*,*,#267337,.F.); +#270308 = ORIENTED_EDGE('',*,*,#270302,.F.); +#270309 = CYLINDRICAL_SURFACE('',#270310,0.475); +#270310 = AXIS2_PLACEMENT_3D('',#270311,#270312,#270313); +#270311 = CARTESIAN_POINT('',(210.19165,-54.3231,-4.6E-02)); +#270312 = DIRECTION('',(-0.,0.,-1.)); +#270313 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270314 = ADVANCED_FACE('',(#270315),#270326,.F.); +#270315 = FACE_BOUND('',#270316,.T.); +#270316 = EDGE_LOOP('',(#270317,#270318,#270324,#270325)); +#270317 = ORIENTED_EDGE('',*,*,#265449,.T.); +#270318 = ORIENTED_EDGE('',*,*,#270319,.T.); +#270319 = EDGE_CURVE('',#265450,#267349,#270320,.T.); +#270320 = LINE('',#270321,#270322); +#270321 = CARTESIAN_POINT('',(211.19165,-46.9231,-4.6E-02)); +#270322 = VECTOR('',#270323,1.); +#270323 = DIRECTION('',(0.,0.,1.)); +#270324 = ORIENTED_EDGE('',*,*,#267348,.F.); +#270325 = ORIENTED_EDGE('',*,*,#270319,.F.); +#270326 = CYLINDRICAL_SURFACE('',#270327,1.6); +#270327 = AXIS2_PLACEMENT_3D('',#270328,#270329,#270330); +#270328 = CARTESIAN_POINT('',(211.19165,-45.3231,-4.6E-02)); +#270329 = DIRECTION('',(-0.,0.,-1.)); +#270330 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#270331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#270335)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#270332,#270333,#270334)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#270332 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#270333 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#270334 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#270335 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#270332, + 'distance_accuracy_value','confusion accuracy'); +#270336 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#270337,#270339); +#270337 = ( REPRESENTATION_RELATIONSHIP('','',#263458,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#270338) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#270338 = ITEM_DEFINED_TRANSFORMATION('','',#11,#511); +#270339 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #270340); +#270340 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('162','=>[0:1:1:73]','',#5, + #263453,$); +#270341 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#263455)); +#270342 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #270343,#270353,#270362,#270371,#270380,#270389,#270398,#270407, + #270416,#270425,#270434,#270443,#270452,#270461,#270470,#270479, + #270488,#270497,#270506,#270515,#270524,#270533,#270542,#270551, + #270560,#270569,#270578,#270587,#270596,#270605,#270614,#270623, + #270632,#270641,#270650,#270659,#270668,#270677,#270686,#270695, + #270704,#270713,#270722,#270731,#270740,#270749,#270758,#270767, + #270776,#270785,#270794,#270803,#270812,#270821,#270830,#270839, + #270848,#270857,#270866,#270875,#270884,#270893,#270902,#270911, + #270920,#270929,#270938,#270947,#270956,#270965,#270974,#270983, + #270992,#271001,#271010,#271019,#271028,#271037,#271046,#271055, + #271064,#271073,#271082,#271091,#271100,#271109,#271118,#271127, + #271136,#271145,#271154,#271163,#271172,#271181,#271190,#271199, + #271208,#271217,#271226,#271235,#271244,#271253,#271262,#271271, + #271280,#271289,#271298,#271307,#271316,#271325,#271334,#271343, + #271352,#271361,#271370,#271379,#271388,#271397,#271406,#271415, + #271424,#271433,#271442,#271451,#271460,#271469,#271478,#271487, + #271496,#271505,#271514,#271523,#271532,#271541,#271550,#271559, + #271568,#271577,#271586,#271595,#271604,#271613,#271622,#271631, + #271640,#271649,#271658,#271667,#271676,#271685,#271694,#271703, + #271712,#271721,#271730,#271739,#271748,#271757,#271766,#271775, + #271784,#271793,#271802,#271811,#271820,#271829,#271838,#271847, + #271856,#271865,#271874,#271883,#271892,#271901,#271910,#271919, + #271928,#271937,#271946,#271955,#271964,#271973,#271982,#271991, + #272000,#272009,#272018,#272027,#272036,#272045,#272054,#272063, + #272072,#272081,#272090,#272099,#272108,#272117,#272126,#272135, + #272144,#272153,#272162,#272171,#272180,#272189,#272198,#272207, + #272216,#272225,#272234,#272243,#272252,#272261,#272270,#272279, + #272288,#272297,#272306,#272315,#272324,#272333,#272342,#272351, + #272360,#272369,#272378,#272387,#272396,#272405,#272414,#272423, + #272432,#272441,#272450,#272459,#272468,#272477,#272486,#272495, + #272504,#272513,#272522,#272531,#272540,#272549,#272558,#272567, + #272576,#272585,#272594,#272603,#272612,#272621,#272630,#272639, + #272648,#272657,#272666,#272675,#272684,#272693,#272702,#272711, + #272720,#272729,#272738,#272747,#272756,#272765,#272774,#272783, + #272792,#272801,#272810,#272819,#272828,#272837,#272846,#272855, + #272864,#272873,#272882,#272891,#272900,#272909,#272918,#272927, + #272936,#272945,#272954,#272963,#272972,#272981,#272990,#272999, + #273008,#273017,#273026,#273035,#273044,#273053,#273062,#273071, + #273080,#273089,#273098,#273107,#273116,#273125,#273134,#273143, + #273152,#273161,#273170,#273179,#273188,#273197,#273206,#273215, + #273224,#273233,#273242,#273251,#273260,#273269,#273278,#273287, + #273296,#273305,#273314,#273323,#273332,#273341,#273350,#273359, + #273368,#273377,#273386,#273395,#273404,#273413,#273422,#273431, + #273440,#273449,#273458,#273467,#273476,#273485,#273494,#273503, + #273512,#273521,#273530,#273539,#273548,#273557,#273566,#273575, + #273584,#273593,#273602,#273611,#273620,#273629,#273638,#273647, + #273656,#273665,#273674,#273683,#273692,#273701,#273710,#273719, + #273728,#273737,#273746,#273755,#273764,#273773,#273782,#273791, + #273800,#273809,#273818,#273827,#273836,#273845,#273854,#273863, + #273872,#273881,#273890,#273899,#273908,#273917,#273926,#273935, + #273944,#273953,#273962,#273971,#273980,#273989,#273998,#274007, + #274016,#274025,#274034,#274043,#274052,#274061,#274070,#274079, + #274088,#274097,#274106,#274115,#274124,#274133,#274142,#274151, + #274160,#274169,#274178,#274187,#274196,#274205,#274214,#274223, + #274232,#274241,#274250,#274259,#274268,#274277,#274286,#274295, + #274304,#274313,#274322,#274331,#274340,#274349,#274358,#274367, + #274376,#274385,#274394,#274403,#274412,#274421,#274430,#274439, + #274448,#274457,#274466,#274475,#274484,#274493,#274502,#274511, + #274520,#274529,#274538,#274547,#274556,#274565,#274574,#274583, + #274592,#274601,#274610,#274619,#274628,#274637,#274646,#274655, + #274664,#274673,#274682,#274691,#274700,#274709,#274718,#274727, + #274736,#274745,#274754,#274763,#274772,#274781,#274790,#274799, + #274808,#274817,#274826,#274835,#274844,#274853,#274862,#274871, + #274880,#274889,#274898,#274907,#274916,#274925,#274934,#274943, + #274952,#274961,#274970,#274979,#274988,#274997,#275006,#275015, + #275024,#275033,#275042,#275051,#275060,#275069,#275078,#275087, + #275096,#275105,#275114,#275123,#275132,#275141,#275150,#275159, + #275168,#275177,#275186,#275195,#275204,#275213,#275222,#275231, + #275240,#275249,#275258,#275267,#275276,#275285,#275294,#275303, + #275312,#275321,#275330,#275339,#275348,#275357,#275366,#275375, + #275384,#275393,#275402,#275411,#275420,#275429,#275438,#275447, + #275456,#275465,#275474,#275483,#275492,#275501,#275510,#275519, + #275528,#275537,#275546,#275555,#275564,#275573,#275582,#275591, + #275600,#275609,#275618,#275627,#275636,#275645,#275654,#275663, + #275672,#275681,#275690,#275699,#275708,#275717,#275726,#275735, + #275744,#275753,#275762,#275771,#275780,#275789,#275798,#275807, + #275816,#275825,#275834,#275843,#275852,#275861,#275870,#275879, + #275888,#275897,#275906,#275915,#275924,#275933,#275942,#275951, + #275960,#275969,#275978,#275987,#275996,#276005,#276014,#276023, + #276032,#276041,#276050,#276059,#276068,#276077,#276086,#276095, + #276104,#276113,#276122,#276131,#276140,#276149,#276158,#276167, + #276176,#276185,#276194,#276203,#276212,#276221,#276230,#276239, + #276248,#276257,#276266,#276275,#276284,#276293,#276302,#276311, + #276320,#276329,#276338,#276347,#276356,#276365,#276374,#276383, + #276392,#276401,#276410,#276419,#276428,#276437,#276446,#276455, + #276464,#276473,#276482,#276491,#276500,#276509,#276518,#276527, + #276536,#276545,#276554,#276563,#276572,#276581,#276590,#276599, + #276608,#276617,#276626,#276635,#276644,#276653,#276662,#276671, + #276680,#276689,#276698,#276707,#276716,#276725,#276734,#276743, + #276752,#276761,#276770,#276779,#276788,#276797,#276806,#276815, + #276824,#276833,#276842,#276851,#276860,#276869,#276878,#276887, + #276896,#276905,#276914,#276923,#276932,#276941,#276950,#276959, + #276968,#276977,#276986,#276995,#277004,#277013,#277022,#277031, + #277040,#277049,#277058,#277067,#277076,#277085,#277094,#277103, + #277112,#277121,#277130,#277139,#277148,#277157,#277166,#277175, + #277184,#277193,#277202,#277211,#277220,#277229,#277238,#277247, + #277256,#277265,#277274,#277283,#277292,#277301,#277310,#277319, + #277328,#277337,#277346,#277355,#277364,#277373,#277382,#277391, + #277400,#277409,#277418,#277427,#277436,#277445,#277454,#277463, + #277472,#277481,#277490,#277499,#277508,#277517,#277526,#277535, + #277544,#277553,#277562,#277571,#277580,#277589,#277598,#277607, + #277616,#277625,#277634,#277643,#277652,#277661,#277670,#277679, + #277688,#277697,#277706,#277715,#277724,#277733,#277742,#277751, + #277760,#277769,#277778,#277787,#277796,#277805,#277814,#277823, + #277832,#277841,#277850,#277859,#277868,#277877,#277886,#277895, + #277904,#277913,#277922,#277931,#277940,#277949,#277958,#277967, + #277976,#277985,#277994,#278003,#278012,#278021,#278030,#278039, + #278048,#278057,#278066,#278075,#278084,#278093,#278102,#278111, + #278120,#278129,#278138,#278147,#278156,#278165,#278174,#278183, + #278192,#278201,#278210,#278219,#278228,#278237,#278246,#278255, + #278264,#278273,#278282,#278291,#278300,#278309,#278318,#278327, + #278336,#278345,#278354,#278363,#278372,#278381,#278390,#278399, + #278408,#278417,#278426,#278435,#278444,#278453,#278462,#278471, + #278480,#278489,#278498,#278507,#278516,#278525,#278534,#278543, + #278552,#278561,#278570,#278579,#278588,#278597,#278606),#257957); +#270343 = STYLED_ITEM('color',(#270344),#123057); +#270344 = PRESENTATION_STYLE_ASSIGNMENT((#270345)); +#270345 = SURFACE_STYLE_USAGE(.BOTH.,#270346); +#270346 = SURFACE_SIDE_STYLE('',(#270347,#270351)); +#270347 = SURFACE_STYLE_FILL_AREA(#270348); +#270348 = FILL_AREA_STYLE('',(#270349)); +#270349 = FILL_AREA_STYLE_COLOUR('',#270350); +#270350 = DRAUGHTING_PRE_DEFINED_COLOUR('white'); +#270351 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270352)); +#270352 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270353 = STYLED_ITEM('color',(#270354),#123125); +#270354 = PRESENTATION_STYLE_ASSIGNMENT((#270355)); +#270355 = SURFACE_STYLE_USAGE(.BOTH.,#270356); +#270356 = SURFACE_SIDE_STYLE('',(#270357,#270360)); +#270357 = SURFACE_STYLE_FILL_AREA(#270358); +#270358 = FILL_AREA_STYLE('',(#270359)); +#270359 = FILL_AREA_STYLE_COLOUR('',#270350); +#270360 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270361)); +#270361 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270362 = STYLED_ITEM('color',(#270363),#123169); +#270363 = PRESENTATION_STYLE_ASSIGNMENT((#270364)); +#270364 = SURFACE_STYLE_USAGE(.BOTH.,#270365); +#270365 = SURFACE_SIDE_STYLE('',(#270366,#270369)); +#270366 = SURFACE_STYLE_FILL_AREA(#270367); +#270367 = FILL_AREA_STYLE('',(#270368)); +#270368 = FILL_AREA_STYLE_COLOUR('',#270350); +#270369 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270370)); +#270370 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270371 = STYLED_ITEM('color',(#270372),#123415); +#270372 = PRESENTATION_STYLE_ASSIGNMENT((#270373)); +#270373 = SURFACE_STYLE_USAGE(.BOTH.,#270374); +#270374 = SURFACE_SIDE_STYLE('',(#270375,#270378)); +#270375 = SURFACE_STYLE_FILL_AREA(#270376); +#270376 = FILL_AREA_STYLE('',(#270377)); +#270377 = FILL_AREA_STYLE_COLOUR('',#270350); +#270378 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270379)); +#270379 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270380 = STYLED_ITEM('color',(#270381),#123517); +#270381 = PRESENTATION_STYLE_ASSIGNMENT((#270382)); +#270382 = SURFACE_STYLE_USAGE(.BOTH.,#270383); +#270383 = SURFACE_SIDE_STYLE('',(#270384,#270387)); +#270384 = SURFACE_STYLE_FILL_AREA(#270385); +#270385 = FILL_AREA_STYLE('',(#270386)); +#270386 = FILL_AREA_STYLE_COLOUR('',#270350); +#270387 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270388)); +#270388 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270389 = STYLED_ITEM('color',(#270390),#124076); +#270390 = PRESENTATION_STYLE_ASSIGNMENT((#270391)); +#270391 = SURFACE_STYLE_USAGE(.BOTH.,#270392); +#270392 = SURFACE_SIDE_STYLE('',(#270393,#270396)); +#270393 = SURFACE_STYLE_FILL_AREA(#270394); +#270394 = FILL_AREA_STYLE('',(#270395)); +#270395 = FILL_AREA_STYLE_COLOUR('',#270350); +#270396 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270397)); +#270397 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270398 = STYLED_ITEM('color',(#270399),#124376); +#270399 = PRESENTATION_STYLE_ASSIGNMENT((#270400)); +#270400 = SURFACE_STYLE_USAGE(.BOTH.,#270401); +#270401 = SURFACE_SIDE_STYLE('',(#270402,#270405)); +#270402 = SURFACE_STYLE_FILL_AREA(#270403); +#270403 = FILL_AREA_STYLE('',(#270404)); +#270404 = FILL_AREA_STYLE_COLOUR('',#270350); +#270405 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270406)); +#270406 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270407 = STYLED_ITEM('color',(#270408),#124637); +#270408 = PRESENTATION_STYLE_ASSIGNMENT((#270409)); +#270409 = SURFACE_STYLE_USAGE(.BOTH.,#270410); +#270410 = SURFACE_SIDE_STYLE('',(#270411,#270414)); +#270411 = SURFACE_STYLE_FILL_AREA(#270412); +#270412 = FILL_AREA_STYLE('',(#270413)); +#270413 = FILL_AREA_STYLE_COLOUR('',#270350); +#270414 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270415)); +#270415 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270416 = STYLED_ITEM('color',(#270417),#125681); +#270417 = PRESENTATION_STYLE_ASSIGNMENT((#270418)); +#270418 = SURFACE_STYLE_USAGE(.BOTH.,#270419); +#270419 = SURFACE_SIDE_STYLE('',(#270420,#270423)); +#270420 = SURFACE_STYLE_FILL_AREA(#270421); +#270421 = FILL_AREA_STYLE('',(#270422)); +#270422 = FILL_AREA_STYLE_COLOUR('',#270350); +#270423 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270424)); +#270424 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270425 = STYLED_ITEM('color',(#270426),#126002); +#270426 = PRESENTATION_STYLE_ASSIGNMENT((#270427)); +#270427 = SURFACE_STYLE_USAGE(.BOTH.,#270428); +#270428 = SURFACE_SIDE_STYLE('',(#270429,#270432)); +#270429 = SURFACE_STYLE_FILL_AREA(#270430); +#270430 = FILL_AREA_STYLE('',(#270431)); +#270431 = FILL_AREA_STYLE_COLOUR('',#270350); +#270432 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270433)); +#270433 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270434 = STYLED_ITEM('color',(#270435),#126104); +#270435 = PRESENTATION_STYLE_ASSIGNMENT((#270436)); +#270436 = SURFACE_STYLE_USAGE(.BOTH.,#270437); +#270437 = SURFACE_SIDE_STYLE('',(#270438,#270441)); +#270438 = SURFACE_STYLE_FILL_AREA(#270439); +#270439 = FILL_AREA_STYLE('',(#270440)); +#270440 = FILL_AREA_STYLE_COLOUR('',#270350); +#270441 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270442)); +#270442 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270443 = STYLED_ITEM('color',(#270444),#126391); +#270444 = PRESENTATION_STYLE_ASSIGNMENT((#270445)); +#270445 = SURFACE_STYLE_USAGE(.BOTH.,#270446); +#270446 = SURFACE_SIDE_STYLE('',(#270447,#270450)); +#270447 = SURFACE_STYLE_FILL_AREA(#270448); +#270448 = FILL_AREA_STYLE('',(#270449)); +#270449 = FILL_AREA_STYLE_COLOUR('',#270350); +#270450 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270451)); +#270451 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270452 = STYLED_ITEM('color',(#270453),#126678); +#270453 = PRESENTATION_STYLE_ASSIGNMENT((#270454)); +#270454 = SURFACE_STYLE_USAGE(.BOTH.,#270455); +#270455 = SURFACE_SIDE_STYLE('',(#270456,#270459)); +#270456 = SURFACE_STYLE_FILL_AREA(#270457); +#270457 = FILL_AREA_STYLE('',(#270458)); +#270458 = FILL_AREA_STYLE_COLOUR('',#270350); +#270459 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270460)); +#270460 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270461 = STYLED_ITEM('color',(#270462),#126965); +#270462 = PRESENTATION_STYLE_ASSIGNMENT((#270463)); +#270463 = SURFACE_STYLE_USAGE(.BOTH.,#270464); +#270464 = SURFACE_SIDE_STYLE('',(#270465,#270468)); +#270465 = SURFACE_STYLE_FILL_AREA(#270466); +#270466 = FILL_AREA_STYLE('',(#270467)); +#270467 = FILL_AREA_STYLE_COLOUR('',#270350); +#270468 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270469)); +#270469 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270470 = STYLED_ITEM('color',(#270471),#127187); +#270471 = PRESENTATION_STYLE_ASSIGNMENT((#270472)); +#270472 = SURFACE_STYLE_USAGE(.BOTH.,#270473); +#270473 = SURFACE_SIDE_STYLE('',(#270474,#270477)); +#270474 = SURFACE_STYLE_FILL_AREA(#270475); +#270475 = FILL_AREA_STYLE('',(#270476)); +#270476 = FILL_AREA_STYLE_COLOUR('',#270350); +#270477 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270478)); +#270478 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270479 = STYLED_ITEM('color',(#270480),#127314); +#270480 = PRESENTATION_STYLE_ASSIGNMENT((#270481)); +#270481 = SURFACE_STYLE_USAGE(.BOTH.,#270482); +#270482 = SURFACE_SIDE_STYLE('',(#270483,#270486)); +#270483 = SURFACE_STYLE_FILL_AREA(#270484); +#270484 = FILL_AREA_STYLE('',(#270485)); +#270485 = FILL_AREA_STYLE_COLOUR('',#270350); +#270486 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270487)); +#270487 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270488 = STYLED_ITEM('color',(#270489),#127441); +#270489 = PRESENTATION_STYLE_ASSIGNMENT((#270490)); +#270490 = SURFACE_STYLE_USAGE(.BOTH.,#270491); +#270491 = SURFACE_SIDE_STYLE('',(#270492,#270495)); +#270492 = SURFACE_STYLE_FILL_AREA(#270493); +#270493 = FILL_AREA_STYLE('',(#270494)); +#270494 = FILL_AREA_STYLE_COLOUR('',#270350); +#270495 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270496)); +#270496 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270497 = STYLED_ITEM('color',(#270498),#127568); +#270498 = PRESENTATION_STYLE_ASSIGNMENT((#270499)); +#270499 = SURFACE_STYLE_USAGE(.BOTH.,#270500); +#270500 = SURFACE_SIDE_STYLE('',(#270501,#270504)); +#270501 = SURFACE_STYLE_FILL_AREA(#270502); +#270502 = FILL_AREA_STYLE('',(#270503)); +#270503 = FILL_AREA_STYLE_COLOUR('',#270350); +#270504 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270505)); +#270505 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270506 = STYLED_ITEM('color',(#270507),#127676); +#270507 = PRESENTATION_STYLE_ASSIGNMENT((#270508)); +#270508 = SURFACE_STYLE_USAGE(.BOTH.,#270509); +#270509 = SURFACE_SIDE_STYLE('',(#270510,#270513)); +#270510 = SURFACE_STYLE_FILL_AREA(#270511); +#270511 = FILL_AREA_STYLE('',(#270512)); +#270512 = FILL_AREA_STYLE_COLOUR('',#270350); +#270513 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270514)); +#270514 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270515 = STYLED_ITEM('color',(#270516),#127754); +#270516 = PRESENTATION_STYLE_ASSIGNMENT((#270517)); +#270517 = SURFACE_STYLE_USAGE(.BOTH.,#270518); +#270518 = SURFACE_SIDE_STYLE('',(#270519,#270522)); +#270519 = SURFACE_STYLE_FILL_AREA(#270520); +#270520 = FILL_AREA_STYLE('',(#270521)); +#270521 = FILL_AREA_STYLE_COLOUR('',#270350); +#270522 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270523)); +#270523 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270524 = STYLED_ITEM('color',(#270525),#127928); +#270525 = PRESENTATION_STYLE_ASSIGNMENT((#270526)); +#270526 = SURFACE_STYLE_USAGE(.BOTH.,#270527); +#270527 = SURFACE_SIDE_STYLE('',(#270528,#270531)); +#270528 = SURFACE_STYLE_FILL_AREA(#270529); +#270529 = FILL_AREA_STYLE('',(#270530)); +#270530 = FILL_AREA_STYLE_COLOUR('',#270350); +#270531 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270532)); +#270532 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270533 = STYLED_ITEM('color',(#270534),#128109); +#270534 = PRESENTATION_STYLE_ASSIGNMENT((#270535)); +#270535 = SURFACE_STYLE_USAGE(.BOTH.,#270536); +#270536 = SURFACE_SIDE_STYLE('',(#270537,#270540)); +#270537 = SURFACE_STYLE_FILL_AREA(#270538); +#270538 = FILL_AREA_STYLE('',(#270539)); +#270539 = FILL_AREA_STYLE_COLOUR('',#270350); +#270540 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270541)); +#270541 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270542 = STYLED_ITEM('color',(#270543),#128187); +#270543 = PRESENTATION_STYLE_ASSIGNMENT((#270544)); +#270544 = SURFACE_STYLE_USAGE(.BOTH.,#270545); +#270545 = SURFACE_SIDE_STYLE('',(#270546,#270549)); +#270546 = SURFACE_STYLE_FILL_AREA(#270547); +#270547 = FILL_AREA_STYLE('',(#270548)); +#270548 = FILL_AREA_STYLE_COLOUR('',#270350); +#270549 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270550)); +#270550 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270551 = STYLED_ITEM('color',(#270552),#128385); +#270552 = PRESENTATION_STYLE_ASSIGNMENT((#270553)); +#270553 = SURFACE_STYLE_USAGE(.BOTH.,#270554); +#270554 = SURFACE_SIDE_STYLE('',(#270555,#270558)); +#270555 = SURFACE_STYLE_FILL_AREA(#270556); +#270556 = FILL_AREA_STYLE('',(#270557)); +#270557 = FILL_AREA_STYLE_COLOUR('',#270350); +#270558 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270559)); +#270559 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270560 = STYLED_ITEM('color',(#270561),#128559); +#270561 = PRESENTATION_STYLE_ASSIGNMENT((#270562)); +#270562 = SURFACE_STYLE_USAGE(.BOTH.,#270563); +#270563 = SURFACE_SIDE_STYLE('',(#270564,#270567)); +#270564 = SURFACE_STYLE_FILL_AREA(#270565); +#270565 = FILL_AREA_STYLE('',(#270566)); +#270566 = FILL_AREA_STYLE_COLOUR('',#270350); +#270567 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270568)); +#270568 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270569 = STYLED_ITEM('color',(#270570),#129045); +#270570 = PRESENTATION_STYLE_ASSIGNMENT((#270571)); +#270571 = SURFACE_STYLE_USAGE(.BOTH.,#270572); +#270572 = SURFACE_SIDE_STYLE('',(#270573,#270576)); +#270573 = SURFACE_STYLE_FILL_AREA(#270574); +#270574 = FILL_AREA_STYLE('',(#270575)); +#270575 = FILL_AREA_STYLE_COLOUR('',#270350); +#270576 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270577)); +#270577 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270578 = STYLED_ITEM('color',(#270579),#129474); +#270579 = PRESENTATION_STYLE_ASSIGNMENT((#270580)); +#270580 = SURFACE_STYLE_USAGE(.BOTH.,#270581); +#270581 = SURFACE_SIDE_STYLE('',(#270582,#270585)); +#270582 = SURFACE_STYLE_FILL_AREA(#270583); +#270583 = FILL_AREA_STYLE('',(#270584)); +#270584 = FILL_AREA_STYLE_COLOUR('',#270350); +#270585 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270586)); +#270586 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270587 = STYLED_ITEM('color',(#270588),#129628); +#270588 = PRESENTATION_STYLE_ASSIGNMENT((#270589)); +#270589 = SURFACE_STYLE_USAGE(.BOTH.,#270590); +#270590 = SURFACE_SIDE_STYLE('',(#270591,#270594)); +#270591 = SURFACE_STYLE_FILL_AREA(#270592); +#270592 = FILL_AREA_STYLE('',(#270593)); +#270593 = FILL_AREA_STYLE_COLOUR('',#270350); +#270594 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270595)); +#270595 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270596 = STYLED_ITEM('color',(#270597),#129670); +#270597 = PRESENTATION_STYLE_ASSIGNMENT((#270598)); +#270598 = SURFACE_STYLE_USAGE(.BOTH.,#270599); +#270599 = SURFACE_SIDE_STYLE('',(#270600,#270603)); +#270600 = SURFACE_STYLE_FILL_AREA(#270601); +#270601 = FILL_AREA_STYLE('',(#270602)); +#270602 = FILL_AREA_STYLE_COLOUR('',#270350); +#270603 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270604)); +#270604 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270605 = STYLED_ITEM('color',(#270606),#130009); +#270606 = PRESENTATION_STYLE_ASSIGNMENT((#270607)); +#270607 = SURFACE_STYLE_USAGE(.BOTH.,#270608); +#270608 = SURFACE_SIDE_STYLE('',(#270609,#270612)); +#270609 = SURFACE_STYLE_FILL_AREA(#270610); +#270610 = FILL_AREA_STYLE('',(#270611)); +#270611 = FILL_AREA_STYLE_COLOUR('',#270350); +#270612 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270613)); +#270613 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270614 = STYLED_ITEM('color',(#270615),#130061); +#270615 = PRESENTATION_STYLE_ASSIGNMENT((#270616)); +#270616 = SURFACE_STYLE_USAGE(.BOTH.,#270617); +#270617 = SURFACE_SIDE_STYLE('',(#270618,#270621)); +#270618 = SURFACE_STYLE_FILL_AREA(#270619); +#270619 = FILL_AREA_STYLE('',(#270620)); +#270620 = FILL_AREA_STYLE_COLOUR('',#270350); +#270621 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270622)); +#270622 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270623 = STYLED_ITEM('color',(#270624),#130113); +#270624 = PRESENTATION_STYLE_ASSIGNMENT((#270625)); +#270625 = SURFACE_STYLE_USAGE(.BOTH.,#270626); +#270626 = SURFACE_SIDE_STYLE('',(#270627,#270630)); +#270627 = SURFACE_STYLE_FILL_AREA(#270628); +#270628 = FILL_AREA_STYLE('',(#270629)); +#270629 = FILL_AREA_STYLE_COLOUR('',#270350); +#270630 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270631)); +#270631 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270632 = STYLED_ITEM('color',(#270633),#130207); +#270633 = PRESENTATION_STYLE_ASSIGNMENT((#270634)); +#270634 = SURFACE_STYLE_USAGE(.BOTH.,#270635); +#270635 = SURFACE_SIDE_STYLE('',(#270636,#270639)); +#270636 = SURFACE_STYLE_FILL_AREA(#270637); +#270637 = FILL_AREA_STYLE('',(#270638)); +#270638 = FILL_AREA_STYLE_COLOUR('',#270350); +#270639 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270640)); +#270640 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270641 = STYLED_ITEM('color',(#270642),#130487); +#270642 = PRESENTATION_STYLE_ASSIGNMENT((#270643)); +#270643 = SURFACE_STYLE_USAGE(.BOTH.,#270644); +#270644 = SURFACE_SIDE_STYLE('',(#270645,#270648)); +#270645 = SURFACE_STYLE_FILL_AREA(#270646); +#270646 = FILL_AREA_STYLE('',(#270647)); +#270647 = FILL_AREA_STYLE_COLOUR('',#270350); +#270648 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270649)); +#270649 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270650 = STYLED_ITEM('color',(#270651),#130736); +#270651 = PRESENTATION_STYLE_ASSIGNMENT((#270652)); +#270652 = SURFACE_STYLE_USAGE(.BOTH.,#270653); +#270653 = SURFACE_SIDE_STYLE('',(#270654,#270657)); +#270654 = SURFACE_STYLE_FILL_AREA(#270655); +#270655 = FILL_AREA_STYLE('',(#270656)); +#270656 = FILL_AREA_STYLE_COLOUR('',#270350); +#270657 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270658)); +#270658 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270659 = STYLED_ITEM('color',(#270660),#130871); +#270660 = PRESENTATION_STYLE_ASSIGNMENT((#270661)); +#270661 = SURFACE_STYLE_USAGE(.BOTH.,#270662); +#270662 = SURFACE_SIDE_STYLE('',(#270663,#270666)); +#270663 = SURFACE_STYLE_FILL_AREA(#270664); +#270664 = FILL_AREA_STYLE('',(#270665)); +#270665 = FILL_AREA_STYLE_COLOUR('',#270350); +#270666 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270667)); +#270667 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270668 = STYLED_ITEM('color',(#270669),#130998); +#270669 = PRESENTATION_STYLE_ASSIGNMENT((#270670)); +#270670 = SURFACE_STYLE_USAGE(.BOTH.,#270671); +#270671 = SURFACE_SIDE_STYLE('',(#270672,#270675)); +#270672 = SURFACE_STYLE_FILL_AREA(#270673); +#270673 = FILL_AREA_STYLE('',(#270674)); +#270674 = FILL_AREA_STYLE_COLOUR('',#270350); +#270675 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270676)); +#270676 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270677 = STYLED_ITEM('color',(#270678),#131254); +#270678 = PRESENTATION_STYLE_ASSIGNMENT((#270679)); +#270679 = SURFACE_STYLE_USAGE(.BOTH.,#270680); +#270680 = SURFACE_SIDE_STYLE('',(#270681,#270684)); +#270681 = SURFACE_STYLE_FILL_AREA(#270682); +#270682 = FILL_AREA_STYLE('',(#270683)); +#270683 = FILL_AREA_STYLE_COLOUR('',#270350); +#270684 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270685)); +#270685 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270686 = STYLED_ITEM('color',(#270687),#131526); +#270687 = PRESENTATION_STYLE_ASSIGNMENT((#270688)); +#270688 = SURFACE_STYLE_USAGE(.BOTH.,#270689); +#270689 = SURFACE_SIDE_STYLE('',(#270690,#270693)); +#270690 = SURFACE_STYLE_FILL_AREA(#270691); +#270691 = FILL_AREA_STYLE('',(#270692)); +#270692 = FILL_AREA_STYLE_COLOUR('',#270350); +#270693 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270694)); +#270694 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270695 = STYLED_ITEM('color',(#270696),#131669); +#270696 = PRESENTATION_STYLE_ASSIGNMENT((#270697)); +#270697 = SURFACE_STYLE_USAGE(.BOTH.,#270698); +#270698 = SURFACE_SIDE_STYLE('',(#270699,#270702)); +#270699 = SURFACE_STYLE_FILL_AREA(#270700); +#270700 = FILL_AREA_STYLE('',(#270701)); +#270701 = FILL_AREA_STYLE_COLOUR('',#270350); +#270702 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270703)); +#270703 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270704 = STYLED_ITEM('color',(#270705),#131721); +#270705 = PRESENTATION_STYLE_ASSIGNMENT((#270706)); +#270706 = SURFACE_STYLE_USAGE(.BOTH.,#270707); +#270707 = SURFACE_SIDE_STYLE('',(#270708,#270711)); +#270708 = SURFACE_STYLE_FILL_AREA(#270709); +#270709 = FILL_AREA_STYLE('',(#270710)); +#270710 = FILL_AREA_STYLE_COLOUR('',#270350); +#270711 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270712)); +#270712 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270713 = STYLED_ITEM('color',(#270714),#131773); +#270714 = PRESENTATION_STYLE_ASSIGNMENT((#270715)); +#270715 = SURFACE_STYLE_USAGE(.BOTH.,#270716); +#270716 = SURFACE_SIDE_STYLE('',(#270717,#270720)); +#270717 = SURFACE_STYLE_FILL_AREA(#270718); +#270718 = FILL_AREA_STYLE('',(#270719)); +#270719 = FILL_AREA_STYLE_COLOUR('',#270350); +#270720 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270721)); +#270721 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270722 = STYLED_ITEM('color',(#270723),#131967); +#270723 = PRESENTATION_STYLE_ASSIGNMENT((#270724)); +#270724 = SURFACE_STYLE_USAGE(.BOTH.,#270725); +#270725 = SURFACE_SIDE_STYLE('',(#270726,#270729)); +#270726 = SURFACE_STYLE_FILL_AREA(#270727); +#270727 = FILL_AREA_STYLE('',(#270728)); +#270728 = FILL_AREA_STYLE_COLOUR('',#270350); +#270729 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270730)); +#270730 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270731 = STYLED_ITEM('color',(#270732),#132061); +#270732 = PRESENTATION_STYLE_ASSIGNMENT((#270733)); +#270733 = SURFACE_STYLE_USAGE(.BOTH.,#270734); +#270734 = SURFACE_SIDE_STYLE('',(#270735,#270738)); +#270735 = SURFACE_STYLE_FILL_AREA(#270736); +#270736 = FILL_AREA_STYLE('',(#270737)); +#270737 = FILL_AREA_STYLE_COLOUR('',#270350); +#270738 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270739)); +#270739 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270740 = STYLED_ITEM('color',(#270741),#132105); +#270741 = PRESENTATION_STYLE_ASSIGNMENT((#270742)); +#270742 = SURFACE_STYLE_USAGE(.BOTH.,#270743); +#270743 = SURFACE_SIDE_STYLE('',(#270744,#270747)); +#270744 = SURFACE_STYLE_FILL_AREA(#270745); +#270745 = FILL_AREA_STYLE('',(#270746)); +#270746 = FILL_AREA_STYLE_COLOUR('',#270350); +#270747 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270748)); +#270748 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270749 = STYLED_ITEM('color',(#270750),#132256); +#270750 = PRESENTATION_STYLE_ASSIGNMENT((#270751)); +#270751 = SURFACE_STYLE_USAGE(.BOTH.,#270752); +#270752 = SURFACE_SIDE_STYLE('',(#270753,#270756)); +#270753 = SURFACE_STYLE_FILL_AREA(#270754); +#270754 = FILL_AREA_STYLE('',(#270755)); +#270755 = FILL_AREA_STYLE_COLOUR('',#270350); +#270756 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270757)); +#270757 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270758 = STYLED_ITEM('color',(#270759),#132382); +#270759 = PRESENTATION_STYLE_ASSIGNMENT((#270760)); +#270760 = SURFACE_STYLE_USAGE(.BOTH.,#270761); +#270761 = SURFACE_SIDE_STYLE('',(#270762,#270765)); +#270762 = SURFACE_STYLE_FILL_AREA(#270763); +#270763 = FILL_AREA_STYLE('',(#270764)); +#270764 = FILL_AREA_STYLE_COLOUR('',#270350); +#270765 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270766)); +#270766 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270767 = STYLED_ITEM('color',(#270768),#132599); +#270768 = PRESENTATION_STYLE_ASSIGNMENT((#270769)); +#270769 = SURFACE_STYLE_USAGE(.BOTH.,#270770); +#270770 = SURFACE_SIDE_STYLE('',(#270771,#270774)); +#270771 = SURFACE_STYLE_FILL_AREA(#270772); +#270772 = FILL_AREA_STYLE('',(#270773)); +#270773 = FILL_AREA_STYLE_COLOUR('',#270350); +#270774 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270775)); +#270775 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270776 = STYLED_ITEM('color',(#270777),#132809); +#270777 = PRESENTATION_STYLE_ASSIGNMENT((#270778)); +#270778 = SURFACE_STYLE_USAGE(.BOTH.,#270779); +#270779 = SURFACE_SIDE_STYLE('',(#270780,#270783)); +#270780 = SURFACE_STYLE_FILL_AREA(#270781); +#270781 = FILL_AREA_STYLE('',(#270782)); +#270782 = FILL_AREA_STYLE_COLOUR('',#270350); +#270783 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270784)); +#270784 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270785 = STYLED_ITEM('color',(#270786),#132960); +#270786 = PRESENTATION_STYLE_ASSIGNMENT((#270787)); +#270787 = SURFACE_STYLE_USAGE(.BOTH.,#270788); +#270788 = SURFACE_SIDE_STYLE('',(#270789,#270792)); +#270789 = SURFACE_STYLE_FILL_AREA(#270790); +#270790 = FILL_AREA_STYLE('',(#270791)); +#270791 = FILL_AREA_STYLE_COLOUR('',#270350); +#270792 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270793)); +#270793 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270794 = STYLED_ITEM('color',(#270795),#133086); +#270795 = PRESENTATION_STYLE_ASSIGNMENT((#270796)); +#270796 = SURFACE_STYLE_USAGE(.BOTH.,#270797); +#270797 = SURFACE_SIDE_STYLE('',(#270798,#270801)); +#270798 = SURFACE_STYLE_FILL_AREA(#270799); +#270799 = FILL_AREA_STYLE('',(#270800)); +#270800 = FILL_AREA_STYLE_COLOUR('',#270350); +#270801 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270802)); +#270802 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270803 = STYLED_ITEM('color',(#270804),#133229); +#270804 = PRESENTATION_STYLE_ASSIGNMENT((#270805)); +#270805 = SURFACE_STYLE_USAGE(.BOTH.,#270806); +#270806 = SURFACE_SIDE_STYLE('',(#270807,#270810)); +#270807 = SURFACE_STYLE_FILL_AREA(#270808); +#270808 = FILL_AREA_STYLE('',(#270809)); +#270809 = FILL_AREA_STYLE_COLOUR('',#270350); +#270810 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270811)); +#270811 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270812 = STYLED_ITEM('color',(#270813),#133314); +#270813 = PRESENTATION_STYLE_ASSIGNMENT((#270814)); +#270814 = SURFACE_STYLE_USAGE(.BOTH.,#270815); +#270815 = SURFACE_SIDE_STYLE('',(#270816,#270819)); +#270816 = SURFACE_STYLE_FILL_AREA(#270817); +#270817 = FILL_AREA_STYLE('',(#270818)); +#270818 = FILL_AREA_STYLE_COLOUR('',#270350); +#270819 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270820)); +#270820 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270821 = STYLED_ITEM('color',(#270822),#133456); +#270822 = PRESENTATION_STYLE_ASSIGNMENT((#270823)); +#270823 = SURFACE_STYLE_USAGE(.BOTH.,#270824); +#270824 = SURFACE_SIDE_STYLE('',(#270825,#270828)); +#270825 = SURFACE_STYLE_FILL_AREA(#270826); +#270826 = FILL_AREA_STYLE('',(#270827)); +#270827 = FILL_AREA_STYLE_COLOUR('',#270350); +#270828 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270829)); +#270829 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270830 = STYLED_ITEM('color',(#270831),#133583); +#270831 = PRESENTATION_STYLE_ASSIGNMENT((#270832)); +#270832 = SURFACE_STYLE_USAGE(.BOTH.,#270833); +#270833 = SURFACE_SIDE_STYLE('',(#270834,#270837)); +#270834 = SURFACE_STYLE_FILL_AREA(#270835); +#270835 = FILL_AREA_STYLE('',(#270836)); +#270836 = FILL_AREA_STYLE_COLOUR('',#270350); +#270837 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270838)); +#270838 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270839 = STYLED_ITEM('color',(#270840),#133855); +#270840 = PRESENTATION_STYLE_ASSIGNMENT((#270841)); +#270841 = SURFACE_STYLE_USAGE(.BOTH.,#270842); +#270842 = SURFACE_SIDE_STYLE('',(#270843,#270846)); +#270843 = SURFACE_STYLE_FILL_AREA(#270844); +#270844 = FILL_AREA_STYLE('',(#270845)); +#270845 = FILL_AREA_STYLE_COLOUR('',#270350); +#270846 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270847)); +#270847 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270848 = STYLED_ITEM('color',(#270849),#134039); +#270849 = PRESENTATION_STYLE_ASSIGNMENT((#270850)); +#270850 = SURFACE_STYLE_USAGE(.BOTH.,#270851); +#270851 = SURFACE_SIDE_STYLE('',(#270852,#270855)); +#270852 = SURFACE_STYLE_FILL_AREA(#270853); +#270853 = FILL_AREA_STYLE('',(#270854)); +#270854 = FILL_AREA_STYLE_COLOUR('',#270350); +#270855 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270856)); +#270856 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270857 = STYLED_ITEM('color',(#270858),#134124); +#270858 = PRESENTATION_STYLE_ASSIGNMENT((#270859)); +#270859 = SURFACE_STYLE_USAGE(.BOTH.,#270860); +#270860 = SURFACE_SIDE_STYLE('',(#270861,#270864)); +#270861 = SURFACE_STYLE_FILL_AREA(#270862); +#270862 = FILL_AREA_STYLE('',(#270863)); +#270863 = FILL_AREA_STYLE_COLOUR('',#270350); +#270864 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270865)); +#270865 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270866 = STYLED_ITEM('color',(#270867),#134318); +#270867 = PRESENTATION_STYLE_ASSIGNMENT((#270868)); +#270868 = SURFACE_STYLE_USAGE(.BOTH.,#270869); +#270869 = SURFACE_SIDE_STYLE('',(#270870,#270873)); +#270870 = SURFACE_STYLE_FILL_AREA(#270871); +#270871 = FILL_AREA_STYLE('',(#270872)); +#270872 = FILL_AREA_STYLE_COLOUR('',#270350); +#270873 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270874)); +#270874 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270875 = STYLED_ITEM('color',(#270876),#134362); +#270876 = PRESENTATION_STYLE_ASSIGNMENT((#270877)); +#270877 = SURFACE_STYLE_USAGE(.BOTH.,#270878); +#270878 = SURFACE_SIDE_STYLE('',(#270879,#270882)); +#270879 = SURFACE_STYLE_FILL_AREA(#270880); +#270880 = FILL_AREA_STYLE('',(#270881)); +#270881 = FILL_AREA_STYLE_COLOUR('',#270350); +#270882 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270883)); +#270883 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270884 = STYLED_ITEM('color',(#270885),#134514); +#270885 = PRESENTATION_STYLE_ASSIGNMENT((#270886)); +#270886 = SURFACE_STYLE_USAGE(.BOTH.,#270887); +#270887 = SURFACE_SIDE_STYLE('',(#270888,#270891)); +#270888 = SURFACE_STYLE_FILL_AREA(#270889); +#270889 = FILL_AREA_STYLE('',(#270890)); +#270890 = FILL_AREA_STYLE_COLOUR('',#270350); +#270891 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270892)); +#270892 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270893 = STYLED_ITEM('color',(#270894),#134608); +#270894 = PRESENTATION_STYLE_ASSIGNMENT((#270895)); +#270895 = SURFACE_STYLE_USAGE(.BOTH.,#270896); +#270896 = SURFACE_SIDE_STYLE('',(#270897,#270900)); +#270897 = SURFACE_STYLE_FILL_AREA(#270898); +#270898 = FILL_AREA_STYLE('',(#270899)); +#270899 = FILL_AREA_STYLE_COLOUR('',#270350); +#270900 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270901)); +#270901 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270902 = STYLED_ITEM('color',(#270903),#134844); +#270903 = PRESENTATION_STYLE_ASSIGNMENT((#270904)); +#270904 = SURFACE_STYLE_USAGE(.BOTH.,#270905); +#270905 = SURFACE_SIDE_STYLE('',(#270906,#270909)); +#270906 = SURFACE_STYLE_FILL_AREA(#270907); +#270907 = FILL_AREA_STYLE('',(#270908)); +#270908 = FILL_AREA_STYLE_COLOUR('',#270350); +#270909 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270910)); +#270910 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270911 = STYLED_ITEM('color',(#270912),#134986); +#270912 = PRESENTATION_STYLE_ASSIGNMENT((#270913)); +#270913 = SURFACE_STYLE_USAGE(.BOTH.,#270914); +#270914 = SURFACE_SIDE_STYLE('',(#270915,#270918)); +#270915 = SURFACE_STYLE_FILL_AREA(#270916); +#270916 = FILL_AREA_STYLE('',(#270917)); +#270917 = FILL_AREA_STYLE_COLOUR('',#270350); +#270918 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270919)); +#270919 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270920 = STYLED_ITEM('color',(#270921),#135164); +#270921 = PRESENTATION_STYLE_ASSIGNMENT((#270922)); +#270922 = SURFACE_STYLE_USAGE(.BOTH.,#270923); +#270923 = SURFACE_SIDE_STYLE('',(#270924,#270927)); +#270924 = SURFACE_STYLE_FILL_AREA(#270925); +#270925 = FILL_AREA_STYLE('',(#270926)); +#270926 = FILL_AREA_STYLE_COLOUR('',#270350); +#270927 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270928)); +#270928 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270929 = STYLED_ITEM('color',(#270930),#135342); +#270930 = PRESENTATION_STYLE_ASSIGNMENT((#270931)); +#270931 = SURFACE_STYLE_USAGE(.BOTH.,#270932); +#270932 = SURFACE_SIDE_STYLE('',(#270933,#270936)); +#270933 = SURFACE_STYLE_FILL_AREA(#270934); +#270934 = FILL_AREA_STYLE('',(#270935)); +#270935 = FILL_AREA_STYLE_COLOUR('',#270350); +#270936 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270937)); +#270937 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270938 = STYLED_ITEM('color',(#270939),#135483); +#270939 = PRESENTATION_STYLE_ASSIGNMENT((#270940)); +#270940 = SURFACE_STYLE_USAGE(.BOTH.,#270941); +#270941 = SURFACE_SIDE_STYLE('',(#270942,#270945)); +#270942 = SURFACE_STYLE_FILL_AREA(#270943); +#270943 = FILL_AREA_STYLE('',(#270944)); +#270944 = FILL_AREA_STYLE_COLOUR('',#270350); +#270945 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270946)); +#270946 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270947 = STYLED_ITEM('color',(#270948),#135627); +#270948 = PRESENTATION_STYLE_ASSIGNMENT((#270949)); +#270949 = SURFACE_STYLE_USAGE(.BOTH.,#270950); +#270950 = SURFACE_SIDE_STYLE('',(#270951,#270954)); +#270951 = SURFACE_STYLE_FILL_AREA(#270952); +#270952 = FILL_AREA_STYLE('',(#270953)); +#270953 = FILL_AREA_STYLE_COLOUR('',#270350); +#270954 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270955)); +#270955 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270956 = STYLED_ITEM('color',(#270957),#135771); +#270957 = PRESENTATION_STYLE_ASSIGNMENT((#270958)); +#270958 = SURFACE_STYLE_USAGE(.BOTH.,#270959); +#270959 = SURFACE_SIDE_STYLE('',(#270960,#270963)); +#270960 = SURFACE_STYLE_FILL_AREA(#270961); +#270961 = FILL_AREA_STYLE('',(#270962)); +#270962 = FILL_AREA_STYLE_COLOUR('',#270350); +#270963 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270964)); +#270964 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270965 = STYLED_ITEM('color',(#270966),#135823); +#270966 = PRESENTATION_STYLE_ASSIGNMENT((#270967)); +#270967 = SURFACE_STYLE_USAGE(.BOTH.,#270968); +#270968 = SURFACE_SIDE_STYLE('',(#270969,#270972)); +#270969 = SURFACE_STYLE_FILL_AREA(#270970); +#270970 = FILL_AREA_STYLE('',(#270971)); +#270971 = FILL_AREA_STYLE_COLOUR('',#270350); +#270972 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270973)); +#270973 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270974 = STYLED_ITEM('color',(#270975),#135875); +#270975 = PRESENTATION_STYLE_ASSIGNMENT((#270976)); +#270976 = SURFACE_STYLE_USAGE(.BOTH.,#270977); +#270977 = SURFACE_SIDE_STYLE('',(#270978,#270981)); +#270978 = SURFACE_STYLE_FILL_AREA(#270979); +#270979 = FILL_AREA_STYLE('',(#270980)); +#270980 = FILL_AREA_STYLE_COLOUR('',#270350); +#270981 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270982)); +#270982 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270983 = STYLED_ITEM('color',(#270984),#135927); +#270984 = PRESENTATION_STYLE_ASSIGNMENT((#270985)); +#270985 = SURFACE_STYLE_USAGE(.BOTH.,#270986); +#270986 = SURFACE_SIDE_STYLE('',(#270987,#270990)); +#270987 = SURFACE_STYLE_FILL_AREA(#270988); +#270988 = FILL_AREA_STYLE('',(#270989)); +#270989 = FILL_AREA_STYLE_COLOUR('',#270350); +#270990 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#270991)); +#270991 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#270992 = STYLED_ITEM('color',(#270993),#135979); +#270993 = PRESENTATION_STYLE_ASSIGNMENT((#270994)); +#270994 = SURFACE_STYLE_USAGE(.BOTH.,#270995); +#270995 = SURFACE_SIDE_STYLE('',(#270996,#270999)); +#270996 = SURFACE_STYLE_FILL_AREA(#270997); +#270997 = FILL_AREA_STYLE('',(#270998)); +#270998 = FILL_AREA_STYLE_COLOUR('',#270350); +#270999 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271000)); +#271000 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271001 = STYLED_ITEM('color',(#271002),#136123); +#271002 = PRESENTATION_STYLE_ASSIGNMENT((#271003)); +#271003 = SURFACE_STYLE_USAGE(.BOTH.,#271004); +#271004 = SURFACE_SIDE_STYLE('',(#271005,#271008)); +#271005 = SURFACE_STYLE_FILL_AREA(#271006); +#271006 = FILL_AREA_STYLE('',(#271007)); +#271007 = FILL_AREA_STYLE_COLOUR('',#270350); +#271008 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271009)); +#271009 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271010 = STYLED_ITEM('color',(#271011),#136267); +#271011 = PRESENTATION_STYLE_ASSIGNMENT((#271012)); +#271012 = SURFACE_STYLE_USAGE(.BOTH.,#271013); +#271013 = SURFACE_SIDE_STYLE('',(#271014,#271017)); +#271014 = SURFACE_STYLE_FILL_AREA(#271015); +#271015 = FILL_AREA_STYLE('',(#271016)); +#271016 = FILL_AREA_STYLE_COLOUR('',#270350); +#271017 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271018)); +#271018 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271019 = STYLED_ITEM('color',(#271020),#136344); +#271020 = PRESENTATION_STYLE_ASSIGNMENT((#271021)); +#271021 = SURFACE_STYLE_USAGE(.BOTH.,#271022); +#271022 = SURFACE_SIDE_STYLE('',(#271023,#271026)); +#271023 = SURFACE_STYLE_FILL_AREA(#271024); +#271024 = FILL_AREA_STYLE('',(#271025)); +#271025 = FILL_AREA_STYLE_COLOUR('',#270350); +#271026 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271027)); +#271027 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271028 = STYLED_ITEM('color',(#271029),#136429); +#271029 = PRESENTATION_STYLE_ASSIGNMENT((#271030)); +#271030 = SURFACE_STYLE_USAGE(.BOTH.,#271031); +#271031 = SURFACE_SIDE_STYLE('',(#271032,#271035)); +#271032 = SURFACE_STYLE_FILL_AREA(#271033); +#271033 = FILL_AREA_STYLE('',(#271034)); +#271034 = FILL_AREA_STYLE_COLOUR('',#270350); +#271035 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271036)); +#271036 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271037 = STYLED_ITEM('color',(#271038),#136498); +#271038 = PRESENTATION_STYLE_ASSIGNMENT((#271039)); +#271039 = SURFACE_STYLE_USAGE(.BOTH.,#271040); +#271040 = SURFACE_SIDE_STYLE('',(#271041,#271044)); +#271041 = SURFACE_STYLE_FILL_AREA(#271042); +#271042 = FILL_AREA_STYLE('',(#271043)); +#271043 = FILL_AREA_STYLE_COLOUR('',#270350); +#271044 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271045)); +#271045 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271046 = STYLED_ITEM('color',(#271047),#136946); +#271047 = PRESENTATION_STYLE_ASSIGNMENT((#271048)); +#271048 = SURFACE_STYLE_USAGE(.BOTH.,#271049); +#271049 = SURFACE_SIDE_STYLE('',(#271050,#271053)); +#271050 = SURFACE_STYLE_FILL_AREA(#271051); +#271051 = FILL_AREA_STYLE('',(#271052)); +#271052 = FILL_AREA_STYLE_COLOUR('',#270350); +#271053 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271054)); +#271054 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271055 = STYLED_ITEM('color',(#271056),#137129); +#271056 = PRESENTATION_STYLE_ASSIGNMENT((#271057)); +#271057 = SURFACE_STYLE_USAGE(.BOTH.,#271058); +#271058 = SURFACE_SIDE_STYLE('',(#271059,#271062)); +#271059 = SURFACE_STYLE_FILL_AREA(#271060); +#271060 = FILL_AREA_STYLE('',(#271061)); +#271061 = FILL_AREA_STYLE_COLOUR('',#270350); +#271062 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271063)); +#271063 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271064 = STYLED_ITEM('color',(#271065),#137271); +#271065 = PRESENTATION_STYLE_ASSIGNMENT((#271066)); +#271066 = SURFACE_STYLE_USAGE(.BOTH.,#271067); +#271067 = SURFACE_SIDE_STYLE('',(#271068,#271071)); +#271068 = SURFACE_STYLE_FILL_AREA(#271069); +#271069 = FILL_AREA_STYLE('',(#271070)); +#271070 = FILL_AREA_STYLE_COLOUR('',#270350); +#271071 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271072)); +#271072 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271073 = STYLED_ITEM('color',(#271074),#137395); +#271074 = PRESENTATION_STYLE_ASSIGNMENT((#271075)); +#271075 = SURFACE_STYLE_USAGE(.BOTH.,#271076); +#271076 = SURFACE_SIDE_STYLE('',(#271077,#271080)); +#271077 = SURFACE_STYLE_FILL_AREA(#271078); +#271078 = FILL_AREA_STYLE('',(#271079)); +#271079 = FILL_AREA_STYLE_COLOUR('',#270350); +#271080 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271081)); +#271081 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271082 = STYLED_ITEM('color',(#271083),#137547); +#271083 = PRESENTATION_STYLE_ASSIGNMENT((#271084)); +#271084 = SURFACE_STYLE_USAGE(.BOTH.,#271085); +#271085 = SURFACE_SIDE_STYLE('',(#271086,#271089)); +#271086 = SURFACE_STYLE_FILL_AREA(#271087); +#271087 = FILL_AREA_STYLE('',(#271088)); +#271088 = FILL_AREA_STYLE_COLOUR('',#270350); +#271089 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271090)); +#271090 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271091 = STYLED_ITEM('color',(#271092),#137680); +#271092 = PRESENTATION_STYLE_ASSIGNMENT((#271093)); +#271093 = SURFACE_STYLE_USAGE(.BOTH.,#271094); +#271094 = SURFACE_SIDE_STYLE('',(#271095,#271098)); +#271095 = SURFACE_STYLE_FILL_AREA(#271096); +#271096 = FILL_AREA_STYLE('',(#271097)); +#271097 = FILL_AREA_STYLE_COLOUR('',#270350); +#271098 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271099)); +#271099 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271100 = STYLED_ITEM('color',(#271101),#137798); +#271101 = PRESENTATION_STYLE_ASSIGNMENT((#271102)); +#271102 = SURFACE_STYLE_USAGE(.BOTH.,#271103); +#271103 = SURFACE_SIDE_STYLE('',(#271104,#271107)); +#271104 = SURFACE_STYLE_FILL_AREA(#271105); +#271105 = FILL_AREA_STYLE('',(#271106)); +#271106 = FILL_AREA_STYLE_COLOUR('',#270350); +#271107 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271108)); +#271108 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271109 = STYLED_ITEM('color',(#271110),#137926); +#271110 = PRESENTATION_STYLE_ASSIGNMENT((#271111)); +#271111 = SURFACE_STYLE_USAGE(.BOTH.,#271112); +#271112 = SURFACE_SIDE_STYLE('',(#271113,#271116)); +#271113 = SURFACE_STYLE_FILL_AREA(#271114); +#271114 = FILL_AREA_STYLE('',(#271115)); +#271115 = FILL_AREA_STYLE_COLOUR('',#270350); +#271116 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271117)); +#271117 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271118 = STYLED_ITEM('color',(#271119),#138120); +#271119 = PRESENTATION_STYLE_ASSIGNMENT((#271120)); +#271120 = SURFACE_STYLE_USAGE(.BOTH.,#271121); +#271121 = SURFACE_SIDE_STYLE('',(#271122,#271125)); +#271122 = SURFACE_STYLE_FILL_AREA(#271123); +#271123 = FILL_AREA_STYLE('',(#271124)); +#271124 = FILL_AREA_STYLE_COLOUR('',#270350); +#271125 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271126)); +#271126 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271127 = STYLED_ITEM('color',(#271128),#138262); +#271128 = PRESENTATION_STYLE_ASSIGNMENT((#271129)); +#271129 = SURFACE_STYLE_USAGE(.BOTH.,#271130); +#271130 = SURFACE_SIDE_STYLE('',(#271131,#271134)); +#271131 = SURFACE_STYLE_FILL_AREA(#271132); +#271132 = FILL_AREA_STYLE('',(#271133)); +#271133 = FILL_AREA_STYLE_COLOUR('',#270350); +#271134 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271135)); +#271135 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271136 = STYLED_ITEM('color',(#271137),#138390); +#271137 = PRESENTATION_STYLE_ASSIGNMENT((#271138)); +#271138 = SURFACE_STYLE_USAGE(.BOTH.,#271139); +#271139 = SURFACE_SIDE_STYLE('',(#271140,#271143)); +#271140 = SURFACE_STYLE_FILL_AREA(#271141); +#271141 = FILL_AREA_STYLE('',(#271142)); +#271142 = FILL_AREA_STYLE_COLOUR('',#270350); +#271143 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271144)); +#271144 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271145 = STYLED_ITEM('color',(#271146),#138533); +#271146 = PRESENTATION_STYLE_ASSIGNMENT((#271147)); +#271147 = SURFACE_STYLE_USAGE(.BOTH.,#271148); +#271148 = SURFACE_SIDE_STYLE('',(#271149,#271152)); +#271149 = SURFACE_STYLE_FILL_AREA(#271150); +#271150 = FILL_AREA_STYLE('',(#271151)); +#271151 = FILL_AREA_STYLE_COLOUR('',#270350); +#271152 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271153)); +#271153 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271154 = STYLED_ITEM('color',(#271155),#138830); +#271155 = PRESENTATION_STYLE_ASSIGNMENT((#271156)); +#271156 = SURFACE_STYLE_USAGE(.BOTH.,#271157); +#271157 = SURFACE_SIDE_STYLE('',(#271158,#271161)); +#271158 = SURFACE_STYLE_FILL_AREA(#271159); +#271159 = FILL_AREA_STYLE('',(#271160)); +#271160 = FILL_AREA_STYLE_COLOUR('',#270350); +#271161 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271162)); +#271162 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271163 = STYLED_ITEM('color',(#271164),#139013); +#271164 = PRESENTATION_STYLE_ASSIGNMENT((#271165)); +#271165 = SURFACE_STYLE_USAGE(.BOTH.,#271166); +#271166 = SURFACE_SIDE_STYLE('',(#271167,#271170)); +#271167 = SURFACE_STYLE_FILL_AREA(#271168); +#271168 = FILL_AREA_STYLE('',(#271169)); +#271169 = FILL_AREA_STYLE_COLOUR('',#270350); +#271170 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271171)); +#271171 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271172 = STYLED_ITEM('color',(#271173),#139057); +#271173 = PRESENTATION_STYLE_ASSIGNMENT((#271174)); +#271174 = SURFACE_STYLE_USAGE(.BOTH.,#271175); +#271175 = SURFACE_SIDE_STYLE('',(#271176,#271179)); +#271176 = SURFACE_STYLE_FILL_AREA(#271177); +#271177 = FILL_AREA_STYLE('',(#271178)); +#271178 = FILL_AREA_STYLE_COLOUR('',#270350); +#271179 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271180)); +#271180 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271181 = STYLED_ITEM('color',(#271182),#139199); +#271182 = PRESENTATION_STYLE_ASSIGNMENT((#271183)); +#271183 = SURFACE_STYLE_USAGE(.BOTH.,#271184); +#271184 = SURFACE_SIDE_STYLE('',(#271185,#271188)); +#271185 = SURFACE_STYLE_FILL_AREA(#271186); +#271186 = FILL_AREA_STYLE('',(#271187)); +#271187 = FILL_AREA_STYLE_COLOUR('',#270350); +#271188 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271189)); +#271189 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271190 = STYLED_ITEM('color',(#271191),#139406); +#271191 = PRESENTATION_STYLE_ASSIGNMENT((#271192)); +#271192 = SURFACE_STYLE_USAGE(.BOTH.,#271193); +#271193 = SURFACE_SIDE_STYLE('',(#271194,#271197)); +#271194 = SURFACE_STYLE_FILL_AREA(#271195); +#271195 = FILL_AREA_STYLE('',(#271196)); +#271196 = FILL_AREA_STYLE_COLOUR('',#270350); +#271197 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271198)); +#271198 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271199 = STYLED_ITEM('color',(#271200),#139450); +#271200 = PRESENTATION_STYLE_ASSIGNMENT((#271201)); +#271201 = SURFACE_STYLE_USAGE(.BOTH.,#271202); +#271202 = SURFACE_SIDE_STYLE('',(#271203,#271206)); +#271203 = SURFACE_STYLE_FILL_AREA(#271204); +#271204 = FILL_AREA_STYLE('',(#271205)); +#271205 = FILL_AREA_STYLE_COLOUR('',#270350); +#271206 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271207)); +#271207 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271208 = STYLED_ITEM('color',(#271209),#139643); +#271209 = PRESENTATION_STYLE_ASSIGNMENT((#271210)); +#271210 = SURFACE_STYLE_USAGE(.BOTH.,#271211); +#271211 = SURFACE_SIDE_STYLE('',(#271212,#271215)); +#271212 = SURFACE_STYLE_FILL_AREA(#271213); +#271213 = FILL_AREA_STYLE('',(#271214)); +#271214 = FILL_AREA_STYLE_COLOUR('',#270350); +#271215 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271216)); +#271216 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271217 = STYLED_ITEM('color',(#271218),#139786); +#271218 = PRESENTATION_STYLE_ASSIGNMENT((#271219)); +#271219 = SURFACE_STYLE_USAGE(.BOTH.,#271220); +#271220 = SURFACE_SIDE_STYLE('',(#271221,#271224)); +#271221 = SURFACE_STYLE_FILL_AREA(#271222); +#271222 = FILL_AREA_STYLE('',(#271223)); +#271223 = FILL_AREA_STYLE_COLOUR('',#270350); +#271224 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271225)); +#271225 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271226 = STYLED_ITEM('color',(#271227),#139980); +#271227 = PRESENTATION_STYLE_ASSIGNMENT((#271228)); +#271228 = SURFACE_STYLE_USAGE(.BOTH.,#271229); +#271229 = SURFACE_SIDE_STYLE('',(#271230,#271233)); +#271230 = SURFACE_STYLE_FILL_AREA(#271231); +#271231 = FILL_AREA_STYLE('',(#271232)); +#271232 = FILL_AREA_STYLE_COLOUR('',#270350); +#271233 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271234)); +#271234 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271235 = STYLED_ITEM('color',(#271236),#140048); +#271236 = PRESENTATION_STYLE_ASSIGNMENT((#271237)); +#271237 = SURFACE_STYLE_USAGE(.BOTH.,#271238); +#271238 = SURFACE_SIDE_STYLE('',(#271239,#271242)); +#271239 = SURFACE_STYLE_FILL_AREA(#271240); +#271240 = FILL_AREA_STYLE('',(#271241)); +#271241 = FILL_AREA_STYLE_COLOUR('',#270350); +#271242 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271243)); +#271243 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271244 = STYLED_ITEM('color',(#271245),#140126); +#271245 = PRESENTATION_STYLE_ASSIGNMENT((#271246)); +#271246 = SURFACE_STYLE_USAGE(.BOTH.,#271247); +#271247 = SURFACE_SIDE_STYLE('',(#271248,#271251)); +#271248 = SURFACE_STYLE_FILL_AREA(#271249); +#271249 = FILL_AREA_STYLE('',(#271250)); +#271250 = FILL_AREA_STYLE_COLOUR('',#270350); +#271251 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271252)); +#271252 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271253 = STYLED_ITEM('color',(#271254),#140170); +#271254 = PRESENTATION_STYLE_ASSIGNMENT((#271255)); +#271255 = SURFACE_STYLE_USAGE(.BOTH.,#271256); +#271256 = SURFACE_SIDE_STYLE('',(#271257,#271260)); +#271257 = SURFACE_STYLE_FILL_AREA(#271258); +#271258 = FILL_AREA_STYLE('',(#271259)); +#271259 = FILL_AREA_STYLE_COLOUR('',#270350); +#271260 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271261)); +#271261 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271262 = STYLED_ITEM('color',(#271263),#140264); +#271263 = PRESENTATION_STYLE_ASSIGNMENT((#271264)); +#271264 = SURFACE_STYLE_USAGE(.BOTH.,#271265); +#271265 = SURFACE_SIDE_STYLE('',(#271266,#271269)); +#271266 = SURFACE_STYLE_FILL_AREA(#271267); +#271267 = FILL_AREA_STYLE('',(#271268)); +#271268 = FILL_AREA_STYLE_COLOUR('',#270350); +#271269 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271270)); +#271270 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271271 = STYLED_ITEM('color',(#271272),#140308); +#271272 = PRESENTATION_STYLE_ASSIGNMENT((#271273)); +#271273 = SURFACE_STYLE_USAGE(.BOTH.,#271274); +#271274 = SURFACE_SIDE_STYLE('',(#271275,#271278)); +#271275 = SURFACE_STYLE_FILL_AREA(#271276); +#271276 = FILL_AREA_STYLE('',(#271277)); +#271277 = FILL_AREA_STYLE_COLOUR('',#270350); +#271278 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271279)); +#271279 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271280 = STYLED_ITEM('color',(#271281),#140352); +#271281 = PRESENTATION_STYLE_ASSIGNMENT((#271282)); +#271282 = SURFACE_STYLE_USAGE(.BOTH.,#271283); +#271283 = SURFACE_SIDE_STYLE('',(#271284,#271287)); +#271284 = SURFACE_STYLE_FILL_AREA(#271285); +#271285 = FILL_AREA_STYLE('',(#271286)); +#271286 = FILL_AREA_STYLE_COLOUR('',#270350); +#271287 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271288)); +#271288 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271289 = STYLED_ITEM('color',(#271290),#140396); +#271290 = PRESENTATION_STYLE_ASSIGNMENT((#271291)); +#271291 = SURFACE_STYLE_USAGE(.BOTH.,#271292); +#271292 = SURFACE_SIDE_STYLE('',(#271293,#271296)); +#271293 = SURFACE_STYLE_FILL_AREA(#271294); +#271294 = FILL_AREA_STYLE('',(#271295)); +#271295 = FILL_AREA_STYLE_COLOUR('',#270350); +#271296 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271297)); +#271297 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271298 = STYLED_ITEM('color',(#271299),#140440); +#271299 = PRESENTATION_STYLE_ASSIGNMENT((#271300)); +#271300 = SURFACE_STYLE_USAGE(.BOTH.,#271301); +#271301 = SURFACE_SIDE_STYLE('',(#271302,#271305)); +#271302 = SURFACE_STYLE_FILL_AREA(#271303); +#271303 = FILL_AREA_STYLE('',(#271304)); +#271304 = FILL_AREA_STYLE_COLOUR('',#270350); +#271305 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271306)); +#271306 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271307 = STYLED_ITEM('color',(#271308),#140508); +#271308 = PRESENTATION_STYLE_ASSIGNMENT((#271309)); +#271309 = SURFACE_STYLE_USAGE(.BOTH.,#271310); +#271310 = SURFACE_SIDE_STYLE('',(#271311,#271314)); +#271311 = SURFACE_STYLE_FILL_AREA(#271312); +#271312 = FILL_AREA_STYLE('',(#271313)); +#271313 = FILL_AREA_STYLE_COLOUR('',#270350); +#271314 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271315)); +#271315 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271316 = STYLED_ITEM('color',(#271317),#140577); +#271317 = PRESENTATION_STYLE_ASSIGNMENT((#271318)); +#271318 = SURFACE_STYLE_USAGE(.BOTH.,#271319); +#271319 = SURFACE_SIDE_STYLE('',(#271320,#271323)); +#271320 = SURFACE_STYLE_FILL_AREA(#271321); +#271321 = FILL_AREA_STYLE('',(#271322)); +#271322 = FILL_AREA_STYLE_COLOUR('',#270350); +#271323 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271324)); +#271324 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271325 = STYLED_ITEM('color',(#271326),#140705); +#271326 = PRESENTATION_STYLE_ASSIGNMENT((#271327)); +#271327 = SURFACE_STYLE_USAGE(.BOTH.,#271328); +#271328 = SURFACE_SIDE_STYLE('',(#271329,#271332)); +#271329 = SURFACE_STYLE_FILL_AREA(#271330); +#271330 = FILL_AREA_STYLE('',(#271331)); +#271331 = FILL_AREA_STYLE_COLOUR('',#270350); +#271332 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271333)); +#271333 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271334 = STYLED_ITEM('color',(#271335),#140772); +#271335 = PRESENTATION_STYLE_ASSIGNMENT((#271336)); +#271336 = SURFACE_STYLE_USAGE(.BOTH.,#271337); +#271337 = SURFACE_SIDE_STYLE('',(#271338,#271341)); +#271338 = SURFACE_STYLE_FILL_AREA(#271339); +#271339 = FILL_AREA_STYLE('',(#271340)); +#271340 = FILL_AREA_STYLE_COLOUR('',#270350); +#271341 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271342)); +#271342 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271343 = STYLED_ITEM('color',(#271344),#140898); +#271344 = PRESENTATION_STYLE_ASSIGNMENT((#271345)); +#271345 = SURFACE_STYLE_USAGE(.BOTH.,#271346); +#271346 = SURFACE_SIDE_STYLE('',(#271347,#271350)); +#271347 = SURFACE_STYLE_FILL_AREA(#271348); +#271348 = FILL_AREA_STYLE('',(#271349)); +#271349 = FILL_AREA_STYLE_COLOUR('',#270350); +#271350 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271351)); +#271351 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271352 = STYLED_ITEM('color',(#271353),#140942); +#271353 = PRESENTATION_STYLE_ASSIGNMENT((#271354)); +#271354 = SURFACE_STYLE_USAGE(.BOTH.,#271355); +#271355 = SURFACE_SIDE_STYLE('',(#271356,#271359)); +#271356 = SURFACE_STYLE_FILL_AREA(#271357); +#271357 = FILL_AREA_STYLE('',(#271358)); +#271358 = FILL_AREA_STYLE_COLOUR('',#270350); +#271359 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271360)); +#271360 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271361 = STYLED_ITEM('color',(#271362),#140986); +#271362 = PRESENTATION_STYLE_ASSIGNMENT((#271363)); +#271363 = SURFACE_STYLE_USAGE(.BOTH.,#271364); +#271364 = SURFACE_SIDE_STYLE('',(#271365,#271368)); +#271365 = SURFACE_STYLE_FILL_AREA(#271366); +#271366 = FILL_AREA_STYLE('',(#271367)); +#271367 = FILL_AREA_STYLE_COLOUR('',#270350); +#271368 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271369)); +#271369 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271370 = STYLED_ITEM('color',(#271371),#141030); +#271371 = PRESENTATION_STYLE_ASSIGNMENT((#271372)); +#271372 = SURFACE_STYLE_USAGE(.BOTH.,#271373); +#271373 = SURFACE_SIDE_STYLE('',(#271374,#271377)); +#271374 = SURFACE_STYLE_FILL_AREA(#271375); +#271375 = FILL_AREA_STYLE('',(#271376)); +#271376 = FILL_AREA_STYLE_COLOUR('',#270350); +#271377 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271378)); +#271378 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271379 = STYLED_ITEM('color',(#271380),#141208); +#271380 = PRESENTATION_STYLE_ASSIGNMENT((#271381)); +#271381 = SURFACE_STYLE_USAGE(.BOTH.,#271382); +#271382 = SURFACE_SIDE_STYLE('',(#271383,#271386)); +#271383 = SURFACE_STYLE_FILL_AREA(#271384); +#271384 = FILL_AREA_STYLE('',(#271385)); +#271385 = FILL_AREA_STYLE_COLOUR('',#270350); +#271386 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271387)); +#271387 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271388 = STYLED_ITEM('color',(#271389),#141276); +#271389 = PRESENTATION_STYLE_ASSIGNMENT((#271390)); +#271390 = SURFACE_STYLE_USAGE(.BOTH.,#271391); +#271391 = SURFACE_SIDE_STYLE('',(#271392,#271395)); +#271392 = SURFACE_STYLE_FILL_AREA(#271393); +#271393 = FILL_AREA_STYLE('',(#271394)); +#271394 = FILL_AREA_STYLE_COLOUR('',#270350); +#271395 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271396)); +#271396 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271397 = STYLED_ITEM('color',(#271398),#141443); +#271398 = PRESENTATION_STYLE_ASSIGNMENT((#271399)); +#271399 = SURFACE_STYLE_USAGE(.BOTH.,#271400); +#271400 = SURFACE_SIDE_STYLE('',(#271401,#271404)); +#271401 = SURFACE_STYLE_FILL_AREA(#271402); +#271402 = FILL_AREA_STYLE('',(#271403)); +#271403 = FILL_AREA_STYLE_COLOUR('',#270350); +#271404 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271405)); +#271405 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271406 = STYLED_ITEM('color',(#271407),#141614); +#271407 = PRESENTATION_STYLE_ASSIGNMENT((#271408)); +#271408 = SURFACE_STYLE_USAGE(.BOTH.,#271409); +#271409 = SURFACE_SIDE_STYLE('',(#271410,#271413)); +#271410 = SURFACE_STYLE_FILL_AREA(#271411); +#271411 = FILL_AREA_STYLE('',(#271412)); +#271412 = FILL_AREA_STYLE_COLOUR('',#270350); +#271413 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271414)); +#271414 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271415 = STYLED_ITEM('color',(#271416),#141807); +#271416 = PRESENTATION_STYLE_ASSIGNMENT((#271417)); +#271417 = SURFACE_STYLE_USAGE(.BOTH.,#271418); +#271418 = SURFACE_SIDE_STYLE('',(#271419,#271422)); +#271419 = SURFACE_STYLE_FILL_AREA(#271420); +#271420 = FILL_AREA_STYLE('',(#271421)); +#271421 = FILL_AREA_STYLE_COLOUR('',#270350); +#271422 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271423)); +#271423 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271424 = STYLED_ITEM('color',(#271425),#142000); +#271425 = PRESENTATION_STYLE_ASSIGNMENT((#271426)); +#271426 = SURFACE_STYLE_USAGE(.BOTH.,#271427); +#271427 = SURFACE_SIDE_STYLE('',(#271428,#271431)); +#271428 = SURFACE_STYLE_FILL_AREA(#271429); +#271429 = FILL_AREA_STYLE('',(#271430)); +#271430 = FILL_AREA_STYLE_COLOUR('',#270350); +#271431 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271432)); +#271432 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271433 = STYLED_ITEM('color',(#271434),#142069); +#271434 = PRESENTATION_STYLE_ASSIGNMENT((#271435)); +#271435 = SURFACE_STYLE_USAGE(.BOTH.,#271436); +#271436 = SURFACE_SIDE_STYLE('',(#271437,#271440)); +#271437 = SURFACE_STYLE_FILL_AREA(#271438); +#271438 = FILL_AREA_STYLE('',(#271439)); +#271439 = FILL_AREA_STYLE_COLOUR('',#270350); +#271440 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271441)); +#271441 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271442 = STYLED_ITEM('color',(#271443),#142272); +#271443 = PRESENTATION_STYLE_ASSIGNMENT((#271444)); +#271444 = SURFACE_STYLE_USAGE(.BOTH.,#271445); +#271445 = SURFACE_SIDE_STYLE('',(#271446,#271449)); +#271446 = SURFACE_STYLE_FILL_AREA(#271447); +#271447 = FILL_AREA_STYLE('',(#271448)); +#271448 = FILL_AREA_STYLE_COLOUR('',#270350); +#271449 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271450)); +#271450 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271451 = STYLED_ITEM('color',(#271452),#142424); +#271452 = PRESENTATION_STYLE_ASSIGNMENT((#271453)); +#271453 = SURFACE_STYLE_USAGE(.BOTH.,#271454); +#271454 = SURFACE_SIDE_STYLE('',(#271455,#271458)); +#271455 = SURFACE_STYLE_FILL_AREA(#271456); +#271456 = FILL_AREA_STYLE('',(#271457)); +#271457 = FILL_AREA_STYLE_COLOUR('',#270350); +#271458 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271459)); +#271459 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271460 = STYLED_ITEM('color',(#271461),#142586); +#271461 = PRESENTATION_STYLE_ASSIGNMENT((#271462)); +#271462 = SURFACE_STYLE_USAGE(.BOTH.,#271463); +#271463 = SURFACE_SIDE_STYLE('',(#271464,#271467)); +#271464 = SURFACE_STYLE_FILL_AREA(#271465); +#271465 = FILL_AREA_STYLE('',(#271466)); +#271466 = FILL_AREA_STYLE_COLOUR('',#270350); +#271467 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271468)); +#271468 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271469 = STYLED_ITEM('color',(#271470),#142811); +#271470 = PRESENTATION_STYLE_ASSIGNMENT((#271471)); +#271471 = SURFACE_STYLE_USAGE(.BOTH.,#271472); +#271472 = SURFACE_SIDE_STYLE('',(#271473,#271476)); +#271473 = SURFACE_STYLE_FILL_AREA(#271474); +#271474 = FILL_AREA_STYLE('',(#271475)); +#271475 = FILL_AREA_STYLE_COLOUR('',#270350); +#271476 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271477)); +#271477 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271478 = STYLED_ITEM('color',(#271479),#142855); +#271479 = PRESENTATION_STYLE_ASSIGNMENT((#271480)); +#271480 = SURFACE_STYLE_USAGE(.BOTH.,#271481); +#271481 = SURFACE_SIDE_STYLE('',(#271482,#271485)); +#271482 = SURFACE_STYLE_FILL_AREA(#271483); +#271483 = FILL_AREA_STYLE('',(#271484)); +#271484 = FILL_AREA_STYLE_COLOUR('',#270350); +#271485 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271486)); +#271486 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271487 = STYLED_ITEM('color',(#271488),#142957); +#271488 = PRESENTATION_STYLE_ASSIGNMENT((#271489)); +#271489 = SURFACE_STYLE_USAGE(.BOTH.,#271490); +#271490 = SURFACE_SIDE_STYLE('',(#271491,#271494)); +#271491 = SURFACE_STYLE_FILL_AREA(#271492); +#271492 = FILL_AREA_STYLE('',(#271493)); +#271493 = FILL_AREA_STYLE_COLOUR('',#270350); +#271494 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271495)); +#271495 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271496 = STYLED_ITEM('color',(#271497),#143001); +#271497 = PRESENTATION_STYLE_ASSIGNMENT((#271498)); +#271498 = SURFACE_STYLE_USAGE(.BOTH.,#271499); +#271499 = SURFACE_SIDE_STYLE('',(#271500,#271503)); +#271500 = SURFACE_STYLE_FILL_AREA(#271501); +#271501 = FILL_AREA_STYLE('',(#271502)); +#271502 = FILL_AREA_STYLE_COLOUR('',#270350); +#271503 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271504)); +#271504 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271505 = STYLED_ITEM('color',(#271506),#143179); +#271506 = PRESENTATION_STYLE_ASSIGNMENT((#271507)); +#271507 = SURFACE_STYLE_USAGE(.BOTH.,#271508); +#271508 = SURFACE_SIDE_STYLE('',(#271509,#271512)); +#271509 = SURFACE_STYLE_FILL_AREA(#271510); +#271510 = FILL_AREA_STYLE('',(#271511)); +#271511 = FILL_AREA_STYLE_COLOUR('',#270350); +#271512 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271513)); +#271513 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271514 = STYLED_ITEM('color',(#271515),#143231); +#271515 = PRESENTATION_STYLE_ASSIGNMENT((#271516)); +#271516 = SURFACE_STYLE_USAGE(.BOTH.,#271517); +#271517 = SURFACE_SIDE_STYLE('',(#271518,#271521)); +#271518 = SURFACE_STYLE_FILL_AREA(#271519); +#271519 = FILL_AREA_STYLE('',(#271520)); +#271520 = FILL_AREA_STYLE_COLOUR('',#270350); +#271521 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271522)); +#271522 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271523 = STYLED_ITEM('color',(#271524),#143398); +#271524 = PRESENTATION_STYLE_ASSIGNMENT((#271525)); +#271525 = SURFACE_STYLE_USAGE(.BOTH.,#271526); +#271526 = SURFACE_SIDE_STYLE('',(#271527,#271530)); +#271527 = SURFACE_STYLE_FILL_AREA(#271528); +#271528 = FILL_AREA_STYLE('',(#271529)); +#271529 = FILL_AREA_STYLE_COLOUR('',#270350); +#271530 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271531)); +#271531 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271532 = STYLED_ITEM('color',(#271533),#143591); +#271533 = PRESENTATION_STYLE_ASSIGNMENT((#271534)); +#271534 = SURFACE_STYLE_USAGE(.BOTH.,#271535); +#271535 = SURFACE_SIDE_STYLE('',(#271536,#271539)); +#271536 = SURFACE_STYLE_FILL_AREA(#271537); +#271537 = FILL_AREA_STYLE('',(#271538)); +#271538 = FILL_AREA_STYLE_COLOUR('',#270350); +#271539 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271540)); +#271540 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271541 = STYLED_ITEM('color',(#271542),#143743); +#271542 = PRESENTATION_STYLE_ASSIGNMENT((#271543)); +#271543 = SURFACE_STYLE_USAGE(.BOTH.,#271544); +#271544 = SURFACE_SIDE_STYLE('',(#271545,#271548)); +#271545 = SURFACE_STYLE_FILL_AREA(#271546); +#271546 = FILL_AREA_STYLE('',(#271547)); +#271547 = FILL_AREA_STYLE_COLOUR('',#270350); +#271548 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271549)); +#271549 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271550 = STYLED_ITEM('color',(#271551),#143905); +#271551 = PRESENTATION_STYLE_ASSIGNMENT((#271552)); +#271552 = SURFACE_STYLE_USAGE(.BOTH.,#271553); +#271553 = SURFACE_SIDE_STYLE('',(#271554,#271557)); +#271554 = SURFACE_STYLE_FILL_AREA(#271555); +#271555 = FILL_AREA_STYLE('',(#271556)); +#271556 = FILL_AREA_STYLE_COLOUR('',#270350); +#271557 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271558)); +#271558 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271559 = STYLED_ITEM('color',(#271560),#144130); +#271560 = PRESENTATION_STYLE_ASSIGNMENT((#271561)); +#271561 = SURFACE_STYLE_USAGE(.BOTH.,#271562); +#271562 = SURFACE_SIDE_STYLE('',(#271563,#271566)); +#271563 = SURFACE_STYLE_FILL_AREA(#271564); +#271564 = FILL_AREA_STYLE('',(#271565)); +#271565 = FILL_AREA_STYLE_COLOUR('',#270350); +#271566 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271567)); +#271567 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271568 = STYLED_ITEM('color',(#271569),#144174); +#271569 = PRESENTATION_STYLE_ASSIGNMENT((#271570)); +#271570 = SURFACE_STYLE_USAGE(.BOTH.,#271571); +#271571 = SURFACE_SIDE_STYLE('',(#271572,#271575)); +#271572 = SURFACE_STYLE_FILL_AREA(#271573); +#271573 = FILL_AREA_STYLE('',(#271574)); +#271574 = FILL_AREA_STYLE_COLOUR('',#270350); +#271575 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271576)); +#271576 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271577 = STYLED_ITEM('color',(#271578),#144218); +#271578 = PRESENTATION_STYLE_ASSIGNMENT((#271579)); +#271579 = SURFACE_STYLE_USAGE(.BOTH.,#271580); +#271580 = SURFACE_SIDE_STYLE('',(#271581,#271584)); +#271581 = SURFACE_STYLE_FILL_AREA(#271582); +#271582 = FILL_AREA_STYLE('',(#271583)); +#271583 = FILL_AREA_STYLE_COLOUR('',#270350); +#271584 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271585)); +#271585 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271586 = STYLED_ITEM('color',(#271587),#144262); +#271587 = PRESENTATION_STYLE_ASSIGNMENT((#271588)); +#271588 = SURFACE_STYLE_USAGE(.BOTH.,#271589); +#271589 = SURFACE_SIDE_STYLE('',(#271590,#271593)); +#271590 = SURFACE_STYLE_FILL_AREA(#271591); +#271591 = FILL_AREA_STYLE('',(#271592)); +#271592 = FILL_AREA_STYLE_COLOUR('',#270350); +#271593 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271594)); +#271594 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271595 = STYLED_ITEM('color',(#271596),#144306); +#271596 = PRESENTATION_STYLE_ASSIGNMENT((#271597)); +#271597 = SURFACE_STYLE_USAGE(.BOTH.,#271598); +#271598 = SURFACE_SIDE_STYLE('',(#271599,#271602)); +#271599 = SURFACE_STYLE_FILL_AREA(#271600); +#271600 = FILL_AREA_STYLE('',(#271601)); +#271601 = FILL_AREA_STYLE_COLOUR('',#270350); +#271602 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271603)); +#271603 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271604 = STYLED_ITEM('color',(#271605),#144350); +#271605 = PRESENTATION_STYLE_ASSIGNMENT((#271606)); +#271606 = SURFACE_STYLE_USAGE(.BOTH.,#271607); +#271607 = SURFACE_SIDE_STYLE('',(#271608,#271611)); +#271608 = SURFACE_STYLE_FILL_AREA(#271609); +#271609 = FILL_AREA_STYLE('',(#271610)); +#271610 = FILL_AREA_STYLE_COLOUR('',#270350); +#271611 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271612)); +#271612 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271613 = STYLED_ITEM('color',(#271614),#144394); +#271614 = PRESENTATION_STYLE_ASSIGNMENT((#271615)); +#271615 = SURFACE_STYLE_USAGE(.BOTH.,#271616); +#271616 = SURFACE_SIDE_STYLE('',(#271617,#271620)); +#271617 = SURFACE_STYLE_FILL_AREA(#271618); +#271618 = FILL_AREA_STYLE('',(#271619)); +#271619 = FILL_AREA_STYLE_COLOUR('',#270350); +#271620 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271621)); +#271621 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271622 = STYLED_ITEM('color',(#271623),#144438); +#271623 = PRESENTATION_STYLE_ASSIGNMENT((#271624)); +#271624 = SURFACE_STYLE_USAGE(.BOTH.,#271625); +#271625 = SURFACE_SIDE_STYLE('',(#271626,#271629)); +#271626 = SURFACE_STYLE_FILL_AREA(#271627); +#271627 = FILL_AREA_STYLE('',(#271628)); +#271628 = FILL_AREA_STYLE_COLOUR('',#270350); +#271629 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271630)); +#271630 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271631 = STYLED_ITEM('color',(#271632),#144482); +#271632 = PRESENTATION_STYLE_ASSIGNMENT((#271633)); +#271633 = SURFACE_STYLE_USAGE(.BOTH.,#271634); +#271634 = SURFACE_SIDE_STYLE('',(#271635,#271638)); +#271635 = SURFACE_STYLE_FILL_AREA(#271636); +#271636 = FILL_AREA_STYLE('',(#271637)); +#271637 = FILL_AREA_STYLE_COLOUR('',#270350); +#271638 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271639)); +#271639 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271640 = STYLED_ITEM('color',(#271641),#144526); +#271641 = PRESENTATION_STYLE_ASSIGNMENT((#271642)); +#271642 = SURFACE_STYLE_USAGE(.BOTH.,#271643); +#271643 = SURFACE_SIDE_STYLE('',(#271644,#271647)); +#271644 = SURFACE_STYLE_FILL_AREA(#271645); +#271645 = FILL_AREA_STYLE('',(#271646)); +#271646 = FILL_AREA_STYLE_COLOUR('',#270350); +#271647 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271648)); +#271648 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271649 = STYLED_ITEM('color',(#271650),#144570); +#271650 = PRESENTATION_STYLE_ASSIGNMENT((#271651)); +#271651 = SURFACE_STYLE_USAGE(.BOTH.,#271652); +#271652 = SURFACE_SIDE_STYLE('',(#271653,#271656)); +#271653 = SURFACE_STYLE_FILL_AREA(#271654); +#271654 = FILL_AREA_STYLE('',(#271655)); +#271655 = FILL_AREA_STYLE_COLOUR('',#270350); +#271656 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271657)); +#271657 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271658 = STYLED_ITEM('color',(#271659),#144614); +#271659 = PRESENTATION_STYLE_ASSIGNMENT((#271660)); +#271660 = SURFACE_STYLE_USAGE(.BOTH.,#271661); +#271661 = SURFACE_SIDE_STYLE('',(#271662,#271665)); +#271662 = SURFACE_STYLE_FILL_AREA(#271663); +#271663 = FILL_AREA_STYLE('',(#271664)); +#271664 = FILL_AREA_STYLE_COLOUR('',#270350); +#271665 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271666)); +#271666 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271667 = STYLED_ITEM('color',(#271668),#144658); +#271668 = PRESENTATION_STYLE_ASSIGNMENT((#271669)); +#271669 = SURFACE_STYLE_USAGE(.BOTH.,#271670); +#271670 = SURFACE_SIDE_STYLE('',(#271671,#271674)); +#271671 = SURFACE_STYLE_FILL_AREA(#271672); +#271672 = FILL_AREA_STYLE('',(#271673)); +#271673 = FILL_AREA_STYLE_COLOUR('',#270350); +#271674 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271675)); +#271675 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271676 = STYLED_ITEM('color',(#271677),#144702); +#271677 = PRESENTATION_STYLE_ASSIGNMENT((#271678)); +#271678 = SURFACE_STYLE_USAGE(.BOTH.,#271679); +#271679 = SURFACE_SIDE_STYLE('',(#271680,#271683)); +#271680 = SURFACE_STYLE_FILL_AREA(#271681); +#271681 = FILL_AREA_STYLE('',(#271682)); +#271682 = FILL_AREA_STYLE_COLOUR('',#270350); +#271683 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271684)); +#271684 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271685 = STYLED_ITEM('color',(#271686),#144812); +#271686 = PRESENTATION_STYLE_ASSIGNMENT((#271687)); +#271687 = SURFACE_STYLE_USAGE(.BOTH.,#271688); +#271688 = SURFACE_SIDE_STYLE('',(#271689,#271692)); +#271689 = SURFACE_STYLE_FILL_AREA(#271690); +#271690 = FILL_AREA_STYLE('',(#271691)); +#271691 = FILL_AREA_STYLE_COLOUR('',#270350); +#271692 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271693)); +#271693 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271694 = STYLED_ITEM('color',(#271695),#144856); +#271695 = PRESENTATION_STYLE_ASSIGNMENT((#271696)); +#271696 = SURFACE_STYLE_USAGE(.BOTH.,#271697); +#271697 = SURFACE_SIDE_STYLE('',(#271698,#271701)); +#271698 = SURFACE_STYLE_FILL_AREA(#271699); +#271699 = FILL_AREA_STYLE('',(#271700)); +#271700 = FILL_AREA_STYLE_COLOUR('',#270350); +#271701 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271702)); +#271702 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271703 = STYLED_ITEM('color',(#271704),#144900); +#271704 = PRESENTATION_STYLE_ASSIGNMENT((#271705)); +#271705 = SURFACE_STYLE_USAGE(.BOTH.,#271706); +#271706 = SURFACE_SIDE_STYLE('',(#271707,#271710)); +#271707 = SURFACE_STYLE_FILL_AREA(#271708); +#271708 = FILL_AREA_STYLE('',(#271709)); +#271709 = FILL_AREA_STYLE_COLOUR('',#270350); +#271710 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271711)); +#271711 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271712 = STYLED_ITEM('color',(#271713),#144944); +#271713 = PRESENTATION_STYLE_ASSIGNMENT((#271714)); +#271714 = SURFACE_STYLE_USAGE(.BOTH.,#271715); +#271715 = SURFACE_SIDE_STYLE('',(#271716,#271719)); +#271716 = SURFACE_STYLE_FILL_AREA(#271717); +#271717 = FILL_AREA_STYLE('',(#271718)); +#271718 = FILL_AREA_STYLE_COLOUR('',#270350); +#271719 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271720)); +#271720 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271721 = STYLED_ITEM('color',(#271722),#144988); +#271722 = PRESENTATION_STYLE_ASSIGNMENT((#271723)); +#271723 = SURFACE_STYLE_USAGE(.BOTH.,#271724); +#271724 = SURFACE_SIDE_STYLE('',(#271725,#271728)); +#271725 = SURFACE_STYLE_FILL_AREA(#271726); +#271726 = FILL_AREA_STYLE('',(#271727)); +#271727 = FILL_AREA_STYLE_COLOUR('',#270350); +#271728 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271729)); +#271729 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271730 = STYLED_ITEM('color',(#271731),#145055); +#271731 = PRESENTATION_STYLE_ASSIGNMENT((#271732)); +#271732 = SURFACE_STYLE_USAGE(.BOTH.,#271733); +#271733 = SURFACE_SIDE_STYLE('',(#271734,#271737)); +#271734 = SURFACE_STYLE_FILL_AREA(#271735); +#271735 = FILL_AREA_STYLE('',(#271736)); +#271736 = FILL_AREA_STYLE_COLOUR('',#270350); +#271737 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271738)); +#271738 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271739 = STYLED_ITEM('color',(#271740),#145099); +#271740 = PRESENTATION_STYLE_ASSIGNMENT((#271741)); +#271741 = SURFACE_STYLE_USAGE(.BOTH.,#271742); +#271742 = SURFACE_SIDE_STYLE('',(#271743,#271746)); +#271743 = SURFACE_STYLE_FILL_AREA(#271744); +#271744 = FILL_AREA_STYLE('',(#271745)); +#271745 = FILL_AREA_STYLE_COLOUR('',#270350); +#271746 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271747)); +#271747 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271748 = STYLED_ITEM('color',(#271749),#145143); +#271749 = PRESENTATION_STYLE_ASSIGNMENT((#271750)); +#271750 = SURFACE_STYLE_USAGE(.BOTH.,#271751); +#271751 = SURFACE_SIDE_STYLE('',(#271752,#271755)); +#271752 = SURFACE_STYLE_FILL_AREA(#271753); +#271753 = FILL_AREA_STYLE('',(#271754)); +#271754 = FILL_AREA_STYLE_COLOUR('',#270350); +#271755 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271756)); +#271756 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271757 = STYLED_ITEM('color',(#271758),#145187); +#271758 = PRESENTATION_STYLE_ASSIGNMENT((#271759)); +#271759 = SURFACE_STYLE_USAGE(.BOTH.,#271760); +#271760 = SURFACE_SIDE_STYLE('',(#271761,#271764)); +#271761 = SURFACE_STYLE_FILL_AREA(#271762); +#271762 = FILL_AREA_STYLE('',(#271763)); +#271763 = FILL_AREA_STYLE_COLOUR('',#270350); +#271764 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271765)); +#271765 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271766 = STYLED_ITEM('color',(#271767),#145231); +#271767 = PRESENTATION_STYLE_ASSIGNMENT((#271768)); +#271768 = SURFACE_STYLE_USAGE(.BOTH.,#271769); +#271769 = SURFACE_SIDE_STYLE('',(#271770,#271773)); +#271770 = SURFACE_STYLE_FILL_AREA(#271771); +#271771 = FILL_AREA_STYLE('',(#271772)); +#271772 = FILL_AREA_STYLE_COLOUR('',#270350); +#271773 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271774)); +#271774 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271775 = STYLED_ITEM('color',(#271776),#145275); +#271776 = PRESENTATION_STYLE_ASSIGNMENT((#271777)); +#271777 = SURFACE_STYLE_USAGE(.BOTH.,#271778); +#271778 = SURFACE_SIDE_STYLE('',(#271779,#271782)); +#271779 = SURFACE_STYLE_FILL_AREA(#271780); +#271780 = FILL_AREA_STYLE('',(#271781)); +#271781 = FILL_AREA_STYLE_COLOUR('',#270350); +#271782 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271783)); +#271783 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271784 = STYLED_ITEM('color',(#271785),#145319); +#271785 = PRESENTATION_STYLE_ASSIGNMENT((#271786)); +#271786 = SURFACE_STYLE_USAGE(.BOTH.,#271787); +#271787 = SURFACE_SIDE_STYLE('',(#271788,#271791)); +#271788 = SURFACE_STYLE_FILL_AREA(#271789); +#271789 = FILL_AREA_STYLE('',(#271790)); +#271790 = FILL_AREA_STYLE_COLOUR('',#270350); +#271791 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271792)); +#271792 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271793 = STYLED_ITEM('color',(#271794),#145363); +#271794 = PRESENTATION_STYLE_ASSIGNMENT((#271795)); +#271795 = SURFACE_STYLE_USAGE(.BOTH.,#271796); +#271796 = SURFACE_SIDE_STYLE('',(#271797,#271800)); +#271797 = SURFACE_STYLE_FILL_AREA(#271798); +#271798 = FILL_AREA_STYLE('',(#271799)); +#271799 = FILL_AREA_STYLE_COLOUR('',#270350); +#271800 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271801)); +#271801 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271802 = STYLED_ITEM('color',(#271803),#145530); +#271803 = PRESENTATION_STYLE_ASSIGNMENT((#271804)); +#271804 = SURFACE_STYLE_USAGE(.BOTH.,#271805); +#271805 = SURFACE_SIDE_STYLE('',(#271806,#271809)); +#271806 = SURFACE_STYLE_FILL_AREA(#271807); +#271807 = FILL_AREA_STYLE('',(#271808)); +#271808 = FILL_AREA_STYLE_COLOUR('',#270350); +#271809 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271810)); +#271810 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271811 = STYLED_ITEM('color',(#271812),#145697); +#271812 = PRESENTATION_STYLE_ASSIGNMENT((#271813)); +#271813 = SURFACE_STYLE_USAGE(.BOTH.,#271814); +#271814 = SURFACE_SIDE_STYLE('',(#271815,#271818)); +#271815 = SURFACE_STYLE_FILL_AREA(#271816); +#271816 = FILL_AREA_STYLE('',(#271817)); +#271817 = FILL_AREA_STYLE_COLOUR('',#270350); +#271818 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271819)); +#271819 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271820 = STYLED_ITEM('color',(#271821),#145839); +#271821 = PRESENTATION_STYLE_ASSIGNMENT((#271822)); +#271822 = SURFACE_STYLE_USAGE(.BOTH.,#271823); +#271823 = SURFACE_SIDE_STYLE('',(#271824,#271827)); +#271824 = SURFACE_STYLE_FILL_AREA(#271825); +#271825 = FILL_AREA_STYLE('',(#271826)); +#271826 = FILL_AREA_STYLE_COLOUR('',#270350); +#271827 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271828)); +#271828 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271829 = STYLED_ITEM('color',(#271830),#146010); +#271830 = PRESENTATION_STYLE_ASSIGNMENT((#271831)); +#271831 = SURFACE_STYLE_USAGE(.BOTH.,#271832); +#271832 = SURFACE_SIDE_STYLE('',(#271833,#271836)); +#271833 = SURFACE_STYLE_FILL_AREA(#271834); +#271834 = FILL_AREA_STYLE('',(#271835)); +#271835 = FILL_AREA_STYLE_COLOUR('',#270350); +#271836 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271837)); +#271837 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271838 = STYLED_ITEM('color',(#271839),#146181); +#271839 = PRESENTATION_STYLE_ASSIGNMENT((#271840)); +#271840 = SURFACE_STYLE_USAGE(.BOTH.,#271841); +#271841 = SURFACE_SIDE_STYLE('',(#271842,#271845)); +#271842 = SURFACE_STYLE_FILL_AREA(#271843); +#271843 = FILL_AREA_STYLE('',(#271844)); +#271844 = FILL_AREA_STYLE_COLOUR('',#270350); +#271845 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271846)); +#271846 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271847 = STYLED_ITEM('color',(#271848),#146352); +#271848 = PRESENTATION_STYLE_ASSIGNMENT((#271849)); +#271849 = SURFACE_STYLE_USAGE(.BOTH.,#271850); +#271850 = SURFACE_SIDE_STYLE('',(#271851,#271854)); +#271851 = SURFACE_STYLE_FILL_AREA(#271852); +#271852 = FILL_AREA_STYLE('',(#271853)); +#271853 = FILL_AREA_STYLE_COLOUR('',#270350); +#271854 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271855)); +#271855 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271856 = STYLED_ITEM('color',(#271857),#146523); +#271857 = PRESENTATION_STYLE_ASSIGNMENT((#271858)); +#271858 = SURFACE_STYLE_USAGE(.BOTH.,#271859); +#271859 = SURFACE_SIDE_STYLE('',(#271860,#271863)); +#271860 = SURFACE_STYLE_FILL_AREA(#271861); +#271861 = FILL_AREA_STYLE('',(#271862)); +#271862 = FILL_AREA_STYLE_COLOUR('',#270350); +#271863 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271864)); +#271864 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271865 = STYLED_ITEM('color',(#271866),#146694); +#271866 = PRESENTATION_STYLE_ASSIGNMENT((#271867)); +#271867 = SURFACE_STYLE_USAGE(.BOTH.,#271868); +#271868 = SURFACE_SIDE_STYLE('',(#271869,#271872)); +#271869 = SURFACE_STYLE_FILL_AREA(#271870); +#271870 = FILL_AREA_STYLE('',(#271871)); +#271871 = FILL_AREA_STYLE_COLOUR('',#270350); +#271872 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271873)); +#271873 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271874 = STYLED_ITEM('color',(#271875),#146865); +#271875 = PRESENTATION_STYLE_ASSIGNMENT((#271876)); +#271876 = SURFACE_STYLE_USAGE(.BOTH.,#271877); +#271877 = SURFACE_SIDE_STYLE('',(#271878,#271881)); +#271878 = SURFACE_STYLE_FILL_AREA(#271879); +#271879 = FILL_AREA_STYLE('',(#271880)); +#271880 = FILL_AREA_STYLE_COLOUR('',#270350); +#271881 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271882)); +#271882 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271883 = STYLED_ITEM('color',(#271884),#147036); +#271884 = PRESENTATION_STYLE_ASSIGNMENT((#271885)); +#271885 = SURFACE_STYLE_USAGE(.BOTH.,#271886); +#271886 = SURFACE_SIDE_STYLE('',(#271887,#271890)); +#271887 = SURFACE_STYLE_FILL_AREA(#271888); +#271888 = FILL_AREA_STYLE('',(#271889)); +#271889 = FILL_AREA_STYLE_COLOUR('',#270350); +#271890 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271891)); +#271891 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271892 = STYLED_ITEM('color',(#271893),#147207); +#271893 = PRESENTATION_STYLE_ASSIGNMENT((#271894)); +#271894 = SURFACE_STYLE_USAGE(.BOTH.,#271895); +#271895 = SURFACE_SIDE_STYLE('',(#271896,#271899)); +#271896 = SURFACE_STYLE_FILL_AREA(#271897); +#271897 = FILL_AREA_STYLE('',(#271898)); +#271898 = FILL_AREA_STYLE_COLOUR('',#270350); +#271899 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271900)); +#271900 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271901 = STYLED_ITEM('color',(#271902),#147378); +#271902 = PRESENTATION_STYLE_ASSIGNMENT((#271903)); +#271903 = SURFACE_STYLE_USAGE(.BOTH.,#271904); +#271904 = SURFACE_SIDE_STYLE('',(#271905,#271908)); +#271905 = SURFACE_STYLE_FILL_AREA(#271906); +#271906 = FILL_AREA_STYLE('',(#271907)); +#271907 = FILL_AREA_STYLE_COLOUR('',#270350); +#271908 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271909)); +#271909 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271910 = STYLED_ITEM('color',(#271911),#147478); +#271911 = PRESENTATION_STYLE_ASSIGNMENT((#271912)); +#271912 = SURFACE_STYLE_USAGE(.BOTH.,#271913); +#271913 = SURFACE_SIDE_STYLE('',(#271914,#271917)); +#271914 = SURFACE_STYLE_FILL_AREA(#271915); +#271915 = FILL_AREA_STYLE('',(#271916)); +#271916 = FILL_AREA_STYLE_COLOUR('',#270350); +#271917 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271918)); +#271918 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271919 = STYLED_ITEM('color',(#271920),#147671); +#271920 = PRESENTATION_STYLE_ASSIGNMENT((#271921)); +#271921 = SURFACE_STYLE_USAGE(.BOTH.,#271922); +#271922 = SURFACE_SIDE_STYLE('',(#271923,#271926)); +#271923 = SURFACE_STYLE_FILL_AREA(#271924); +#271924 = FILL_AREA_STYLE('',(#271925)); +#271925 = FILL_AREA_STYLE_COLOUR('',#270350); +#271926 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271927)); +#271927 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271928 = STYLED_ITEM('color',(#271929),#147864); +#271929 = PRESENTATION_STYLE_ASSIGNMENT((#271930)); +#271930 = SURFACE_STYLE_USAGE(.BOTH.,#271931); +#271931 = SURFACE_SIDE_STYLE('',(#271932,#271935)); +#271932 = SURFACE_STYLE_FILL_AREA(#271933); +#271933 = FILL_AREA_STYLE('',(#271934)); +#271934 = FILL_AREA_STYLE_COLOUR('',#270350); +#271935 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271936)); +#271936 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271937 = STYLED_ITEM('color',(#271938),#147933); +#271938 = PRESENTATION_STYLE_ASSIGNMENT((#271939)); +#271939 = SURFACE_STYLE_USAGE(.BOTH.,#271940); +#271940 = SURFACE_SIDE_STYLE('',(#271941,#271944)); +#271941 = SURFACE_STYLE_FILL_AREA(#271942); +#271942 = FILL_AREA_STYLE('',(#271943)); +#271943 = FILL_AREA_STYLE_COLOUR('',#270350); +#271944 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271945)); +#271945 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271946 = STYLED_ITEM('color',(#271947),#148136); +#271947 = PRESENTATION_STYLE_ASSIGNMENT((#271948)); +#271948 = SURFACE_STYLE_USAGE(.BOTH.,#271949); +#271949 = SURFACE_SIDE_STYLE('',(#271950,#271953)); +#271950 = SURFACE_STYLE_FILL_AREA(#271951); +#271951 = FILL_AREA_STYLE('',(#271952)); +#271952 = FILL_AREA_STYLE_COLOUR('',#270350); +#271953 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271954)); +#271954 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271955 = STYLED_ITEM('color',(#271956),#148367); +#271956 = PRESENTATION_STYLE_ASSIGNMENT((#271957)); +#271957 = SURFACE_STYLE_USAGE(.BOTH.,#271958); +#271958 = SURFACE_SIDE_STYLE('',(#271959,#271962)); +#271959 = SURFACE_STYLE_FILL_AREA(#271960); +#271960 = FILL_AREA_STYLE('',(#271961)); +#271961 = FILL_AREA_STYLE_COLOUR('',#270350); +#271962 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271963)); +#271963 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271964 = STYLED_ITEM('color',(#271965),#148545); +#271965 = PRESENTATION_STYLE_ASSIGNMENT((#271966)); +#271966 = SURFACE_STYLE_USAGE(.BOTH.,#271967); +#271967 = SURFACE_SIDE_STYLE('',(#271968,#271971)); +#271968 = SURFACE_STYLE_FILL_AREA(#271969); +#271969 = FILL_AREA_STYLE('',(#271970)); +#271970 = FILL_AREA_STYLE_COLOUR('',#270350); +#271971 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271972)); +#271972 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271973 = STYLED_ITEM('color',(#271974),#148766); +#271974 = PRESENTATION_STYLE_ASSIGNMENT((#271975)); +#271975 = SURFACE_STYLE_USAGE(.BOTH.,#271976); +#271976 = SURFACE_SIDE_STYLE('',(#271977,#271980)); +#271977 = SURFACE_STYLE_FILL_AREA(#271978); +#271978 = FILL_AREA_STYLE('',(#271979)); +#271979 = FILL_AREA_STYLE_COLOUR('',#270350); +#271980 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271981)); +#271981 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271982 = STYLED_ITEM('color',(#271983),#149079); +#271983 = PRESENTATION_STYLE_ASSIGNMENT((#271984)); +#271984 = SURFACE_STYLE_USAGE(.BOTH.,#271985); +#271985 = SURFACE_SIDE_STYLE('',(#271986,#271989)); +#271986 = SURFACE_STYLE_FILL_AREA(#271987); +#271987 = FILL_AREA_STYLE('',(#271988)); +#271988 = FILL_AREA_STYLE_COLOUR('',#270350); +#271989 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271990)); +#271990 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#271991 = STYLED_ITEM('color',(#271992),#149282); +#271992 = PRESENTATION_STYLE_ASSIGNMENT((#271993)); +#271993 = SURFACE_STYLE_USAGE(.BOTH.,#271994); +#271994 = SURFACE_SIDE_STYLE('',(#271995,#271998)); +#271995 = SURFACE_STYLE_FILL_AREA(#271996); +#271996 = FILL_AREA_STYLE('',(#271997)); +#271997 = FILL_AREA_STYLE_COLOUR('',#270350); +#271998 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#271999)); +#271999 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272000 = STYLED_ITEM('color',(#272001),#149448); +#272001 = PRESENTATION_STYLE_ASSIGNMENT((#272002)); +#272002 = SURFACE_STYLE_USAGE(.BOTH.,#272003); +#272003 = SURFACE_SIDE_STYLE('',(#272004,#272007)); +#272004 = SURFACE_STYLE_FILL_AREA(#272005); +#272005 = FILL_AREA_STYLE('',(#272006)); +#272006 = FILL_AREA_STYLE_COLOUR('',#270350); +#272007 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272008)); +#272008 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272009 = STYLED_ITEM('color',(#272010),#149598); +#272010 = PRESENTATION_STYLE_ASSIGNMENT((#272011)); +#272011 = SURFACE_STYLE_USAGE(.BOTH.,#272012); +#272012 = SURFACE_SIDE_STYLE('',(#272013,#272016)); +#272013 = SURFACE_STYLE_FILL_AREA(#272014); +#272014 = FILL_AREA_STYLE('',(#272015)); +#272015 = FILL_AREA_STYLE_COLOUR('',#270350); +#272016 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272017)); +#272017 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272018 = STYLED_ITEM('color',(#272019),#149741); +#272019 = PRESENTATION_STYLE_ASSIGNMENT((#272020)); +#272020 = SURFACE_STYLE_USAGE(.BOTH.,#272021); +#272021 = SURFACE_SIDE_STYLE('',(#272022,#272025)); +#272022 = SURFACE_STYLE_FILL_AREA(#272023); +#272023 = FILL_AREA_STYLE('',(#272024)); +#272024 = FILL_AREA_STYLE_COLOUR('',#270350); +#272025 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272026)); +#272026 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272027 = STYLED_ITEM('color',(#272028),#149884); +#272028 = PRESENTATION_STYLE_ASSIGNMENT((#272029)); +#272029 = SURFACE_STYLE_USAGE(.BOTH.,#272030); +#272030 = SURFACE_SIDE_STYLE('',(#272031,#272034)); +#272031 = SURFACE_STYLE_FILL_AREA(#272032); +#272032 = FILL_AREA_STYLE('',(#272033)); +#272033 = FILL_AREA_STYLE_COLOUR('',#270350); +#272034 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272035)); +#272035 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272036 = STYLED_ITEM('color',(#272037),#150078); +#272037 = PRESENTATION_STYLE_ASSIGNMENT((#272038)); +#272038 = SURFACE_STYLE_USAGE(.BOTH.,#272039); +#272039 = SURFACE_SIDE_STYLE('',(#272040,#272043)); +#272040 = SURFACE_STYLE_FILL_AREA(#272041); +#272041 = FILL_AREA_STYLE('',(#272042)); +#272042 = FILL_AREA_STYLE_COLOUR('',#270350); +#272043 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272044)); +#272044 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272045 = STYLED_ITEM('color',(#272046),#150290); +#272046 = PRESENTATION_STYLE_ASSIGNMENT((#272047)); +#272047 = SURFACE_STYLE_USAGE(.BOTH.,#272048); +#272048 = SURFACE_SIDE_STYLE('',(#272049,#272052)); +#272049 = SURFACE_STYLE_FILL_AREA(#272050); +#272050 = FILL_AREA_STYLE('',(#272051)); +#272051 = FILL_AREA_STYLE_COLOUR('',#270350); +#272052 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272053)); +#272053 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272054 = STYLED_ITEM('color',(#272055),#150484); +#272055 = PRESENTATION_STYLE_ASSIGNMENT((#272056)); +#272056 = SURFACE_STYLE_USAGE(.BOTH.,#272057); +#272057 = SURFACE_SIDE_STYLE('',(#272058,#272061)); +#272058 = SURFACE_STYLE_FILL_AREA(#272059); +#272059 = FILL_AREA_STYLE('',(#272060)); +#272060 = FILL_AREA_STYLE_COLOUR('',#270350); +#272061 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272062)); +#272062 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272063 = STYLED_ITEM('color',(#272064),#150634); +#272064 = PRESENTATION_STYLE_ASSIGNMENT((#272065)); +#272065 = SURFACE_STYLE_USAGE(.BOTH.,#272066); +#272066 = SURFACE_SIDE_STYLE('',(#272067,#272070)); +#272067 = SURFACE_STYLE_FILL_AREA(#272068); +#272068 = FILL_AREA_STYLE('',(#272069)); +#272069 = FILL_AREA_STYLE_COLOUR('',#270350); +#272070 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272071)); +#272071 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272072 = STYLED_ITEM('color',(#272073),#150828); +#272073 = PRESENTATION_STYLE_ASSIGNMENT((#272074)); +#272074 = SURFACE_STYLE_USAGE(.BOTH.,#272075); +#272075 = SURFACE_SIDE_STYLE('',(#272076,#272079)); +#272076 = SURFACE_STYLE_FILL_AREA(#272077); +#272077 = FILL_AREA_STYLE('',(#272078)); +#272078 = FILL_AREA_STYLE_COLOUR('',#270350); +#272079 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272080)); +#272080 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272081 = STYLED_ITEM('color',(#272082),#150978); +#272082 = PRESENTATION_STYLE_ASSIGNMENT((#272083)); +#272083 = SURFACE_STYLE_USAGE(.BOTH.,#272084); +#272084 = SURFACE_SIDE_STYLE('',(#272085,#272088)); +#272085 = SURFACE_STYLE_FILL_AREA(#272086); +#272086 = FILL_AREA_STYLE('',(#272087)); +#272087 = FILL_AREA_STYLE_COLOUR('',#270350); +#272088 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272089)); +#272089 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272090 = STYLED_ITEM('color',(#272091),#151121); +#272091 = PRESENTATION_STYLE_ASSIGNMENT((#272092)); +#272092 = SURFACE_STYLE_USAGE(.BOTH.,#272093); +#272093 = SURFACE_SIDE_STYLE('',(#272094,#272097)); +#272094 = SURFACE_STYLE_FILL_AREA(#272095); +#272095 = FILL_AREA_STYLE('',(#272096)); +#272096 = FILL_AREA_STYLE_COLOUR('',#270350); +#272097 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272098)); +#272098 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272099 = STYLED_ITEM('color',(#272100),#151327); +#272100 = PRESENTATION_STYLE_ASSIGNMENT((#272101)); +#272101 = SURFACE_STYLE_USAGE(.BOTH.,#272102); +#272102 = SURFACE_SIDE_STYLE('',(#272103,#272106)); +#272103 = SURFACE_STYLE_FILL_AREA(#272104); +#272104 = FILL_AREA_STYLE('',(#272105)); +#272105 = FILL_AREA_STYLE_COLOUR('',#270350); +#272106 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272107)); +#272107 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272108 = STYLED_ITEM('color',(#272109),#151402); +#272109 = PRESENTATION_STYLE_ASSIGNMENT((#272110)); +#272110 = SURFACE_STYLE_USAGE(.BOTH.,#272111); +#272111 = SURFACE_SIDE_STYLE('',(#272112,#272115)); +#272112 = SURFACE_STYLE_FILL_AREA(#272113); +#272113 = FILL_AREA_STYLE('',(#272114)); +#272114 = FILL_AREA_STYLE_COLOUR('',#270350); +#272115 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272116)); +#272116 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272117 = STYLED_ITEM('color',(#272118),#151446); +#272118 = PRESENTATION_STYLE_ASSIGNMENT((#272119)); +#272119 = SURFACE_STYLE_USAGE(.BOTH.,#272120); +#272120 = SURFACE_SIDE_STYLE('',(#272121,#272124)); +#272121 = SURFACE_STYLE_FILL_AREA(#272122); +#272122 = FILL_AREA_STYLE('',(#272123)); +#272123 = FILL_AREA_STYLE_COLOUR('',#270350); +#272124 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272125)); +#272125 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272126 = STYLED_ITEM('color',(#272127),#151624); +#272127 = PRESENTATION_STYLE_ASSIGNMENT((#272128)); +#272128 = SURFACE_STYLE_USAGE(.BOTH.,#272129); +#272129 = SURFACE_SIDE_STYLE('',(#272130,#272133)); +#272130 = SURFACE_STYLE_FILL_AREA(#272131); +#272131 = FILL_AREA_STYLE('',(#272132)); +#272132 = FILL_AREA_STYLE_COLOUR('',#270350); +#272133 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272134)); +#272134 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272135 = STYLED_ITEM('color',(#272136),#151701); +#272136 = PRESENTATION_STYLE_ASSIGNMENT((#272137)); +#272137 = SURFACE_STYLE_USAGE(.BOTH.,#272138); +#272138 = SURFACE_SIDE_STYLE('',(#272139,#272142)); +#272139 = SURFACE_STYLE_FILL_AREA(#272140); +#272140 = FILL_AREA_STYLE('',(#272141)); +#272141 = FILL_AREA_STYLE_COLOUR('',#270350); +#272142 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272143)); +#272143 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272144 = STYLED_ITEM('color',(#272145),#152149); +#272145 = PRESENTATION_STYLE_ASSIGNMENT((#272146)); +#272146 = SURFACE_STYLE_USAGE(.BOTH.,#272147); +#272147 = SURFACE_SIDE_STYLE('',(#272148,#272151)); +#272148 = SURFACE_STYLE_FILL_AREA(#272149); +#272149 = FILL_AREA_STYLE('',(#272150)); +#272150 = FILL_AREA_STYLE_COLOUR('',#270350); +#272151 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272152)); +#272152 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272153 = STYLED_ITEM('color',(#272154),#152316); +#272154 = PRESENTATION_STYLE_ASSIGNMENT((#272155)); +#272155 = SURFACE_STYLE_USAGE(.BOTH.,#272156); +#272156 = SURFACE_SIDE_STYLE('',(#272157,#272160)); +#272157 = SURFACE_STYLE_FILL_AREA(#272158); +#272158 = FILL_AREA_STYLE('',(#272159)); +#272159 = FILL_AREA_STYLE_COLOUR('',#270350); +#272160 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272161)); +#272161 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272162 = STYLED_ITEM('color',(#272163),#152487); +#272163 = PRESENTATION_STYLE_ASSIGNMENT((#272164)); +#272164 = SURFACE_STYLE_USAGE(.BOTH.,#272165); +#272165 = SURFACE_SIDE_STYLE('',(#272166,#272169)); +#272166 = SURFACE_STYLE_FILL_AREA(#272167); +#272167 = FILL_AREA_STYLE('',(#272168)); +#272168 = FILL_AREA_STYLE_COLOUR('',#270350); +#272169 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272170)); +#272170 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272171 = STYLED_ITEM('color',(#272172),#152653); +#272172 = PRESENTATION_STYLE_ASSIGNMENT((#272173)); +#272173 = SURFACE_STYLE_USAGE(.BOTH.,#272174); +#272174 = SURFACE_SIDE_STYLE('',(#272175,#272178)); +#272175 = SURFACE_STYLE_FILL_AREA(#272176); +#272176 = FILL_AREA_STYLE('',(#272177)); +#272177 = FILL_AREA_STYLE_COLOUR('',#270350); +#272178 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272179)); +#272179 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272180 = STYLED_ITEM('color',(#272181),#152763); +#272181 = PRESENTATION_STYLE_ASSIGNMENT((#272182)); +#272182 = SURFACE_STYLE_USAGE(.BOTH.,#272183); +#272183 = SURFACE_SIDE_STYLE('',(#272184,#272187)); +#272184 = SURFACE_STYLE_FILL_AREA(#272185); +#272185 = FILL_AREA_STYLE('',(#272186)); +#272186 = FILL_AREA_STYLE_COLOUR('',#270350); +#272187 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272188)); +#272188 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272189 = STYLED_ITEM('color',(#272190),#152994); +#272190 = PRESENTATION_STYLE_ASSIGNMENT((#272191)); +#272191 = SURFACE_STYLE_USAGE(.BOTH.,#272192); +#272192 = SURFACE_SIDE_STYLE('',(#272193,#272196)); +#272193 = SURFACE_STYLE_FILL_AREA(#272194); +#272194 = FILL_AREA_STYLE('',(#272195)); +#272195 = FILL_AREA_STYLE_COLOUR('',#270350); +#272196 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272197)); +#272197 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272198 = STYLED_ITEM('color',(#272199),#153079); +#272199 = PRESENTATION_STYLE_ASSIGNMENT((#272200)); +#272200 = SURFACE_STYLE_USAGE(.BOTH.,#272201); +#272201 = SURFACE_SIDE_STYLE('',(#272202,#272205)); +#272202 = SURFACE_STYLE_FILL_AREA(#272203); +#272203 = FILL_AREA_STYLE('',(#272204)); +#272204 = FILL_AREA_STYLE_COLOUR('',#270350); +#272205 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272206)); +#272206 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272207 = STYLED_ITEM('color',(#272208),#153300); +#272208 = PRESENTATION_STYLE_ASSIGNMENT((#272209)); +#272209 = SURFACE_STYLE_USAGE(.BOTH.,#272210); +#272210 = SURFACE_SIDE_STYLE('',(#272211,#272214)); +#272211 = SURFACE_STYLE_FILL_AREA(#272212); +#272212 = FILL_AREA_STYLE('',(#272213)); +#272213 = FILL_AREA_STYLE_COLOUR('',#270350); +#272214 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272215)); +#272215 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272216 = STYLED_ITEM('color',(#272217),#153344); +#272217 = PRESENTATION_STYLE_ASSIGNMENT((#272218)); +#272218 = SURFACE_STYLE_USAGE(.BOTH.,#272219); +#272219 = SURFACE_SIDE_STYLE('',(#272220,#272223)); +#272220 = SURFACE_STYLE_FILL_AREA(#272221); +#272221 = FILL_AREA_STYLE('',(#272222)); +#272222 = FILL_AREA_STYLE_COLOUR('',#270350); +#272223 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272224)); +#272224 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272225 = STYLED_ITEM('color',(#272226),#153438); +#272226 = PRESENTATION_STYLE_ASSIGNMENT((#272227)); +#272227 = SURFACE_STYLE_USAGE(.BOTH.,#272228); +#272228 = SURFACE_SIDE_STYLE('',(#272229,#272232)); +#272229 = SURFACE_STYLE_FILL_AREA(#272230); +#272230 = FILL_AREA_STYLE('',(#272231)); +#272231 = FILL_AREA_STYLE_COLOUR('',#270350); +#272232 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272233)); +#272233 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272234 = STYLED_ITEM('color',(#272235),#153694); +#272235 = PRESENTATION_STYLE_ASSIGNMENT((#272236)); +#272236 = SURFACE_STYLE_USAGE(.BOTH.,#272237); +#272237 = SURFACE_SIDE_STYLE('',(#272238,#272241)); +#272238 = SURFACE_STYLE_FILL_AREA(#272239); +#272239 = FILL_AREA_STYLE('',(#272240)); +#272240 = FILL_AREA_STYLE_COLOUR('',#270350); +#272241 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272242)); +#272242 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272243 = STYLED_ITEM('color',(#272244),#153950); +#272244 = PRESENTATION_STYLE_ASSIGNMENT((#272245)); +#272245 = SURFACE_STYLE_USAGE(.BOTH.,#272246); +#272246 = SURFACE_SIDE_STYLE('',(#272247,#272250)); +#272247 = SURFACE_STYLE_FILL_AREA(#272248); +#272248 = FILL_AREA_STYLE('',(#272249)); +#272249 = FILL_AREA_STYLE_COLOUR('',#270350); +#272250 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272251)); +#272251 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272252 = STYLED_ITEM('color',(#272253),#154230); +#272253 = PRESENTATION_STYLE_ASSIGNMENT((#272254)); +#272254 = SURFACE_STYLE_USAGE(.BOTH.,#272255); +#272255 = SURFACE_SIDE_STYLE('',(#272256,#272259)); +#272256 = SURFACE_STYLE_FILL_AREA(#272257); +#272257 = FILL_AREA_STYLE('',(#272258)); +#272258 = FILL_AREA_STYLE_COLOUR('',#270350); +#272259 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272260)); +#272260 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272261 = STYLED_ITEM('color',(#272262),#154274); +#272262 = PRESENTATION_STYLE_ASSIGNMENT((#272263)); +#272263 = SURFACE_STYLE_USAGE(.BOTH.,#272264); +#272264 = SURFACE_SIDE_STYLE('',(#272265,#272268)); +#272265 = SURFACE_STYLE_FILL_AREA(#272266); +#272266 = FILL_AREA_STYLE('',(#272267)); +#272267 = FILL_AREA_STYLE_COLOUR('',#270350); +#272268 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272269)); +#272269 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272270 = STYLED_ITEM('color',(#272271),#154398); +#272271 = PRESENTATION_STYLE_ASSIGNMENT((#272272)); +#272272 = SURFACE_STYLE_USAGE(.BOTH.,#272273); +#272273 = SURFACE_SIDE_STYLE('',(#272274,#272277)); +#272274 = SURFACE_STYLE_FILL_AREA(#272275); +#272275 = FILL_AREA_STYLE('',(#272276)); +#272276 = FILL_AREA_STYLE_COLOUR('',#270350); +#272277 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272278)); +#272278 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272279 = STYLED_ITEM('color',(#272280),#154587); +#272280 = PRESENTATION_STYLE_ASSIGNMENT((#272281)); +#272281 = SURFACE_STYLE_USAGE(.BOTH.,#272282); +#272282 = SURFACE_SIDE_STYLE('',(#272283,#272286)); +#272283 = SURFACE_STYLE_FILL_AREA(#272284); +#272284 = FILL_AREA_STYLE('',(#272285)); +#272285 = FILL_AREA_STYLE_COLOUR('',#270350); +#272286 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272287)); +#272287 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272288 = STYLED_ITEM('color',(#272289),#154945); +#272289 = PRESENTATION_STYLE_ASSIGNMENT((#272290)); +#272290 = SURFACE_STYLE_USAGE(.BOTH.,#272291); +#272291 = SURFACE_SIDE_STYLE('',(#272292,#272295)); +#272292 = SURFACE_STYLE_FILL_AREA(#272293); +#272293 = FILL_AREA_STYLE('',(#272294)); +#272294 = FILL_AREA_STYLE_COLOUR('',#270350); +#272295 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272296)); +#272296 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272297 = STYLED_ITEM('color',(#272298),#155240); +#272298 = PRESENTATION_STYLE_ASSIGNMENT((#272299)); +#272299 = SURFACE_STYLE_USAGE(.BOTH.,#272300); +#272300 = SURFACE_SIDE_STYLE('',(#272301,#272304)); +#272301 = SURFACE_STYLE_FILL_AREA(#272302); +#272302 = FILL_AREA_STYLE('',(#272303)); +#272303 = FILL_AREA_STYLE_COLOUR('',#270350); +#272304 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272305)); +#272305 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272306 = STYLED_ITEM('color',(#272307),#155590); +#272307 = PRESENTATION_STYLE_ASSIGNMENT((#272308)); +#272308 = SURFACE_STYLE_USAGE(.BOTH.,#272309); +#272309 = SURFACE_SIDE_STYLE('',(#272310,#272313)); +#272310 = SURFACE_STYLE_FILL_AREA(#272311); +#272311 = FILL_AREA_STYLE('',(#272312)); +#272312 = FILL_AREA_STYLE_COLOUR('',#270350); +#272313 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272314)); +#272314 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272315 = STYLED_ITEM('color',(#272316),#155885); +#272316 = PRESENTATION_STYLE_ASSIGNMENT((#272317)); +#272317 = SURFACE_STYLE_USAGE(.BOTH.,#272318); +#272318 = SURFACE_SIDE_STYLE('',(#272319,#272322)); +#272319 = SURFACE_STYLE_FILL_AREA(#272320); +#272320 = FILL_AREA_STYLE('',(#272321)); +#272321 = FILL_AREA_STYLE_COLOUR('',#270350); +#272322 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272323)); +#272323 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272324 = STYLED_ITEM('color',(#272325),#156208); +#272325 = PRESENTATION_STYLE_ASSIGNMENT((#272326)); +#272326 = SURFACE_STYLE_USAGE(.BOTH.,#272327); +#272327 = SURFACE_SIDE_STYLE('',(#272328,#272331)); +#272328 = SURFACE_STYLE_FILL_AREA(#272329); +#272329 = FILL_AREA_STYLE('',(#272330)); +#272330 = FILL_AREA_STYLE_COLOUR('',#270350); +#272331 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272332)); +#272332 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272333 = STYLED_ITEM('color',(#272334),#156480); +#272334 = PRESENTATION_STYLE_ASSIGNMENT((#272335)); +#272335 = SURFACE_STYLE_USAGE(.BOTH.,#272336); +#272336 = SURFACE_SIDE_STYLE('',(#272337,#272340)); +#272337 = SURFACE_STYLE_FILL_AREA(#272338); +#272338 = FILL_AREA_STYLE('',(#272339)); +#272339 = FILL_AREA_STYLE_COLOUR('',#270350); +#272340 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272341)); +#272341 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272342 = STYLED_ITEM('color',(#272343),#156705); +#272343 = PRESENTATION_STYLE_ASSIGNMENT((#272344)); +#272344 = SURFACE_STYLE_USAGE(.BOTH.,#272345); +#272345 = SURFACE_SIDE_STYLE('',(#272346,#272349)); +#272346 = SURFACE_STYLE_FILL_AREA(#272347); +#272347 = FILL_AREA_STYLE('',(#272348)); +#272348 = FILL_AREA_STYLE_COLOUR('',#270350); +#272349 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272350)); +#272350 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272351 = STYLED_ITEM('color',(#272352),#156831); +#272352 = PRESENTATION_STYLE_ASSIGNMENT((#272353)); +#272353 = SURFACE_STYLE_USAGE(.BOTH.,#272354); +#272354 = SURFACE_SIDE_STYLE('',(#272355,#272358)); +#272355 = SURFACE_STYLE_FILL_AREA(#272356); +#272356 = FILL_AREA_STYLE('',(#272357)); +#272357 = FILL_AREA_STYLE_COLOUR('',#270350); +#272358 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272359)); +#272359 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272360 = STYLED_ITEM('color',(#272361),#156966); +#272361 = PRESENTATION_STYLE_ASSIGNMENT((#272362)); +#272362 = SURFACE_STYLE_USAGE(.BOTH.,#272363); +#272363 = SURFACE_SIDE_STYLE('',(#272364,#272367)); +#272364 = SURFACE_STYLE_FILL_AREA(#272365); +#272365 = FILL_AREA_STYLE('',(#272366)); +#272366 = FILL_AREA_STYLE_COLOUR('',#270350); +#272367 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272368)); +#272368 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272369 = STYLED_ITEM('color',(#272370),#157074); +#272370 = PRESENTATION_STYLE_ASSIGNMENT((#272371)); +#272371 = SURFACE_STYLE_USAGE(.BOTH.,#272372); +#272372 = SURFACE_SIDE_STYLE('',(#272373,#272376)); +#272373 = SURFACE_STYLE_FILL_AREA(#272374); +#272374 = FILL_AREA_STYLE('',(#272375)); +#272375 = FILL_AREA_STYLE_COLOUR('',#270350); +#272376 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272377)); +#272377 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272378 = STYLED_ITEM('color',(#272379),#157182); +#272379 = PRESENTATION_STYLE_ASSIGNMENT((#272380)); +#272380 = SURFACE_STYLE_USAGE(.BOTH.,#272381); +#272381 = SURFACE_SIDE_STYLE('',(#272382,#272385)); +#272382 = SURFACE_STYLE_FILL_AREA(#272383); +#272383 = FILL_AREA_STYLE('',(#272384)); +#272384 = FILL_AREA_STYLE_COLOUR('',#270350); +#272385 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272386)); +#272386 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272387 = STYLED_ITEM('color',(#272388),#157276); +#272388 = PRESENTATION_STYLE_ASSIGNMENT((#272389)); +#272389 = SURFACE_STYLE_USAGE(.BOTH.,#272390); +#272390 = SURFACE_SIDE_STYLE('',(#272391,#272394)); +#272391 = SURFACE_STYLE_FILL_AREA(#272392); +#272392 = FILL_AREA_STYLE('',(#272393)); +#272393 = FILL_AREA_STYLE_COLOUR('',#270350); +#272394 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272395)); +#272395 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272396 = STYLED_ITEM('color',(#272397),#157532); +#272397 = PRESENTATION_STYLE_ASSIGNMENT((#272398)); +#272398 = SURFACE_STYLE_USAGE(.BOTH.,#272399); +#272399 = SURFACE_SIDE_STYLE('',(#272400,#272403)); +#272400 = SURFACE_STYLE_FILL_AREA(#272401); +#272401 = FILL_AREA_STYLE('',(#272402)); +#272402 = FILL_AREA_STYLE_COLOUR('',#270350); +#272403 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272404)); +#272404 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272405 = STYLED_ITEM('color',(#272406),#157592); +#272406 = PRESENTATION_STYLE_ASSIGNMENT((#272407)); +#272407 = SURFACE_STYLE_USAGE(.BOTH.,#272408); +#272408 = SURFACE_SIDE_STYLE('',(#272409,#272412)); +#272409 = SURFACE_STYLE_FILL_AREA(#272410); +#272410 = FILL_AREA_STYLE('',(#272411)); +#272411 = FILL_AREA_STYLE_COLOUR('',#270350); +#272412 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272413)); +#272413 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272414 = STYLED_ITEM('color',(#272415),#157871); +#272415 = PRESENTATION_STYLE_ASSIGNMENT((#272416)); +#272416 = SURFACE_STYLE_USAGE(.BOTH.,#272417); +#272417 = SURFACE_SIDE_STYLE('',(#272418,#272421)); +#272418 = SURFACE_STYLE_FILL_AREA(#272419); +#272419 = FILL_AREA_STYLE('',(#272420)); +#272420 = FILL_AREA_STYLE_COLOUR('',#270350); +#272421 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272422)); +#272422 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272423 = STYLED_ITEM('color',(#272424),#157931); +#272424 = PRESENTATION_STYLE_ASSIGNMENT((#272425)); +#272425 = SURFACE_STYLE_USAGE(.BOTH.,#272426); +#272426 = SURFACE_SIDE_STYLE('',(#272427,#272430)); +#272427 = SURFACE_STYLE_FILL_AREA(#272428); +#272428 = FILL_AREA_STYLE('',(#272429)); +#272429 = FILL_AREA_STYLE_COLOUR('',#270350); +#272430 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272431)); +#272431 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272432 = STYLED_ITEM('color',(#272433),#158210); +#272433 = PRESENTATION_STYLE_ASSIGNMENT((#272434)); +#272434 = SURFACE_STYLE_USAGE(.BOTH.,#272435); +#272435 = SURFACE_SIDE_STYLE('',(#272436,#272439)); +#272436 = SURFACE_STYLE_FILL_AREA(#272437); +#272437 = FILL_AREA_STYLE('',(#272438)); +#272438 = FILL_AREA_STYLE_COLOUR('',#270350); +#272439 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272440)); +#272440 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272441 = STYLED_ITEM('color',(#272442),#158287); +#272442 = PRESENTATION_STYLE_ASSIGNMENT((#272443)); +#272443 = SURFACE_STYLE_USAGE(.BOTH.,#272444); +#272444 = SURFACE_SIDE_STYLE('',(#272445,#272448)); +#272445 = SURFACE_STYLE_FILL_AREA(#272446); +#272446 = FILL_AREA_STYLE('',(#272447)); +#272447 = FILL_AREA_STYLE_COLOUR('',#270350); +#272448 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272449)); +#272449 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272450 = STYLED_ITEM('color',(#272451),#158501); +#272451 = PRESENTATION_STYLE_ASSIGNMENT((#272452)); +#272452 = SURFACE_STYLE_USAGE(.BOTH.,#272453); +#272453 = SURFACE_SIDE_STYLE('',(#272454,#272457)); +#272454 = SURFACE_STYLE_FILL_AREA(#272455); +#272455 = FILL_AREA_STYLE('',(#272456)); +#272456 = FILL_AREA_STYLE_COLOUR('',#270350); +#272457 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272458)); +#272458 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272459 = STYLED_ITEM('color',(#272460),#158701); +#272460 = PRESENTATION_STYLE_ASSIGNMENT((#272461)); +#272461 = SURFACE_STYLE_USAGE(.BOTH.,#272462); +#272462 = SURFACE_SIDE_STYLE('',(#272463,#272466)); +#272463 = SURFACE_STYLE_FILL_AREA(#272464); +#272464 = FILL_AREA_STYLE('',(#272465)); +#272465 = FILL_AREA_STYLE_COLOUR('',#270350); +#272466 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272467)); +#272467 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272468 = STYLED_ITEM('color',(#272469),#158795); +#272469 = PRESENTATION_STYLE_ASSIGNMENT((#272470)); +#272470 = SURFACE_STYLE_USAGE(.BOTH.,#272471); +#272471 = SURFACE_SIDE_STYLE('',(#272472,#272475)); +#272472 = SURFACE_STYLE_FILL_AREA(#272473); +#272473 = FILL_AREA_STYLE('',(#272474)); +#272474 = FILL_AREA_STYLE_COLOUR('',#270350); +#272475 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272476)); +#272476 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272477 = STYLED_ITEM('color',(#272478),#158977); +#272478 = PRESENTATION_STYLE_ASSIGNMENT((#272479)); +#272479 = SURFACE_STYLE_USAGE(.BOTH.,#272480); +#272480 = SURFACE_SIDE_STYLE('',(#272481,#272484)); +#272481 = SURFACE_STYLE_FILL_AREA(#272482); +#272482 = FILL_AREA_STYLE('',(#272483)); +#272483 = FILL_AREA_STYLE_COLOUR('',#270350); +#272484 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272485)); +#272485 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272486 = STYLED_ITEM('color',(#272487),#159144); +#272487 = PRESENTATION_STYLE_ASSIGNMENT((#272488)); +#272488 = SURFACE_STYLE_USAGE(.BOTH.,#272489); +#272489 = SURFACE_SIDE_STYLE('',(#272490,#272493)); +#272490 = SURFACE_STYLE_FILL_AREA(#272491); +#272491 = FILL_AREA_STYLE('',(#272492)); +#272492 = FILL_AREA_STYLE_COLOUR('',#270350); +#272493 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272494)); +#272494 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272495 = STYLED_ITEM('color',(#272496),#159337); +#272496 = PRESENTATION_STYLE_ASSIGNMENT((#272497)); +#272497 = SURFACE_STYLE_USAGE(.BOTH.,#272498); +#272498 = SURFACE_SIDE_STYLE('',(#272499,#272502)); +#272499 = SURFACE_STYLE_FILL_AREA(#272500); +#272500 = FILL_AREA_STYLE('',(#272501)); +#272501 = FILL_AREA_STYLE_COLOUR('',#270350); +#272502 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272503)); +#272503 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272504 = STYLED_ITEM('color',(#272505),#159554); +#272505 = PRESENTATION_STYLE_ASSIGNMENT((#272506)); +#272506 = SURFACE_STYLE_USAGE(.BOTH.,#272507); +#272507 = SURFACE_SIDE_STYLE('',(#272508,#272511)); +#272508 = SURFACE_STYLE_FILL_AREA(#272509); +#272509 = FILL_AREA_STYLE('',(#272510)); +#272510 = FILL_AREA_STYLE_COLOUR('',#270350); +#272511 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272512)); +#272512 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272513 = STYLED_ITEM('color',(#272514),#159847); +#272514 = PRESENTATION_STYLE_ASSIGNMENT((#272515)); +#272515 = SURFACE_STYLE_USAGE(.BOTH.,#272516); +#272516 = SURFACE_SIDE_STYLE('',(#272517,#272520)); +#272517 = SURFACE_STYLE_FILL_AREA(#272518); +#272518 = FILL_AREA_STYLE('',(#272519)); +#272519 = FILL_AREA_STYLE_COLOUR('',#270350); +#272520 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272521)); +#272521 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272522 = STYLED_ITEM('color',(#272523),#159877); +#272523 = PRESENTATION_STYLE_ASSIGNMENT((#272524)); +#272524 = SURFACE_STYLE_USAGE(.BOTH.,#272525); +#272525 = SURFACE_SIDE_STYLE('',(#272526,#272529)); +#272526 = SURFACE_STYLE_FILL_AREA(#272527); +#272527 = FILL_AREA_STYLE('',(#272528)); +#272528 = FILL_AREA_STYLE_COLOUR('',#270350); +#272529 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272530)); +#272530 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272531 = STYLED_ITEM('color',(#272532),#159921); +#272532 = PRESENTATION_STYLE_ASSIGNMENT((#272533)); +#272533 = SURFACE_STYLE_USAGE(.BOTH.,#272534); +#272534 = SURFACE_SIDE_STYLE('',(#272535,#272538)); +#272535 = SURFACE_STYLE_FILL_AREA(#272536); +#272536 = FILL_AREA_STYLE('',(#272537)); +#272537 = FILL_AREA_STYLE_COLOUR('',#270350); +#272538 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272539)); +#272539 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272540 = STYLED_ITEM('color',(#272541),#159965); +#272541 = PRESENTATION_STYLE_ASSIGNMENT((#272542)); +#272542 = SURFACE_STYLE_USAGE(.BOTH.,#272543); +#272543 = SURFACE_SIDE_STYLE('',(#272544,#272547)); +#272544 = SURFACE_STYLE_FILL_AREA(#272545); +#272545 = FILL_AREA_STYLE('',(#272546)); +#272546 = FILL_AREA_STYLE_COLOUR('',#270350); +#272547 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272548)); +#272548 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272549 = STYLED_ITEM('color',(#272550),#160009); +#272550 = PRESENTATION_STYLE_ASSIGNMENT((#272551)); +#272551 = SURFACE_STYLE_USAGE(.BOTH.,#272552); +#272552 = SURFACE_SIDE_STYLE('',(#272553,#272556)); +#272553 = SURFACE_STYLE_FILL_AREA(#272554); +#272554 = FILL_AREA_STYLE('',(#272555)); +#272555 = FILL_AREA_STYLE_COLOUR('',#270350); +#272556 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272557)); +#272557 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272558 = STYLED_ITEM('color',(#272559),#160053); +#272559 = PRESENTATION_STYLE_ASSIGNMENT((#272560)); +#272560 = SURFACE_STYLE_USAGE(.BOTH.,#272561); +#272561 = SURFACE_SIDE_STYLE('',(#272562,#272565)); +#272562 = SURFACE_STYLE_FILL_AREA(#272563); +#272563 = FILL_AREA_STYLE('',(#272564)); +#272564 = FILL_AREA_STYLE_COLOUR('',#270350); +#272565 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272566)); +#272566 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272567 = STYLED_ITEM('color',(#272568),#160155); +#272568 = PRESENTATION_STYLE_ASSIGNMENT((#272569)); +#272569 = SURFACE_STYLE_USAGE(.BOTH.,#272570); +#272570 = SURFACE_SIDE_STYLE('',(#272571,#272574)); +#272571 = SURFACE_STYLE_FILL_AREA(#272572); +#272572 = FILL_AREA_STYLE('',(#272573)); +#272573 = FILL_AREA_STYLE_COLOUR('',#270350); +#272574 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272575)); +#272575 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272576 = STYLED_ITEM('color',(#272577),#160256); +#272577 = PRESENTATION_STYLE_ASSIGNMENT((#272578)); +#272578 = SURFACE_STYLE_USAGE(.BOTH.,#272579); +#272579 = SURFACE_SIDE_STYLE('',(#272580,#272583)); +#272580 = SURFACE_STYLE_FILL_AREA(#272581); +#272581 = FILL_AREA_STYLE('',(#272582)); +#272582 = FILL_AREA_STYLE_COLOUR('',#270350); +#272583 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272584)); +#272584 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272585 = STYLED_ITEM('color',(#272586),#160357); +#272586 = PRESENTATION_STYLE_ASSIGNMENT((#272587)); +#272587 = SURFACE_STYLE_USAGE(.BOTH.,#272588); +#272588 = SURFACE_SIDE_STYLE('',(#272589,#272592)); +#272589 = SURFACE_STYLE_FILL_AREA(#272590); +#272590 = FILL_AREA_STYLE('',(#272591)); +#272591 = FILL_AREA_STYLE_COLOUR('',#270350); +#272592 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272593)); +#272593 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272594 = STYLED_ITEM('color',(#272595),#160401); +#272595 = PRESENTATION_STYLE_ASSIGNMENT((#272596)); +#272596 = SURFACE_STYLE_USAGE(.BOTH.,#272597); +#272597 = SURFACE_SIDE_STYLE('',(#272598,#272601)); +#272598 = SURFACE_STYLE_FILL_AREA(#272599); +#272599 = FILL_AREA_STYLE('',(#272600)); +#272600 = FILL_AREA_STYLE_COLOUR('',#270350); +#272601 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272602)); +#272602 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272603 = STYLED_ITEM('color',(#272604),#160445); +#272604 = PRESENTATION_STYLE_ASSIGNMENT((#272605)); +#272605 = SURFACE_STYLE_USAGE(.BOTH.,#272606); +#272606 = SURFACE_SIDE_STYLE('',(#272607,#272610)); +#272607 = SURFACE_STYLE_FILL_AREA(#272608); +#272608 = FILL_AREA_STYLE('',(#272609)); +#272609 = FILL_AREA_STYLE_COLOUR('',#270350); +#272610 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272611)); +#272611 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272612 = STYLED_ITEM('color',(#272613),#160489); +#272613 = PRESENTATION_STYLE_ASSIGNMENT((#272614)); +#272614 = SURFACE_STYLE_USAGE(.BOTH.,#272615); +#272615 = SURFACE_SIDE_STYLE('',(#272616,#272619)); +#272616 = SURFACE_STYLE_FILL_AREA(#272617); +#272617 = FILL_AREA_STYLE('',(#272618)); +#272618 = FILL_AREA_STYLE_COLOUR('',#270350); +#272619 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272620)); +#272620 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272621 = STYLED_ITEM('color',(#272622),#160533); +#272622 = PRESENTATION_STYLE_ASSIGNMENT((#272623)); +#272623 = SURFACE_STYLE_USAGE(.BOTH.,#272624); +#272624 = SURFACE_SIDE_STYLE('',(#272625,#272628)); +#272625 = SURFACE_STYLE_FILL_AREA(#272626); +#272626 = FILL_AREA_STYLE('',(#272627)); +#272627 = FILL_AREA_STYLE_COLOUR('',#270350); +#272628 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272629)); +#272629 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272630 = STYLED_ITEM('color',(#272631),#160856); +#272631 = PRESENTATION_STYLE_ASSIGNMENT((#272632)); +#272632 = SURFACE_STYLE_USAGE(.BOTH.,#272633); +#272633 = SURFACE_SIDE_STYLE('',(#272634,#272637)); +#272634 = SURFACE_STYLE_FILL_AREA(#272635); +#272635 = FILL_AREA_STYLE('',(#272636)); +#272636 = FILL_AREA_STYLE_COLOUR('',#270350); +#272637 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272638)); +#272638 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272639 = STYLED_ITEM('color',(#272640),#161008); +#272640 = PRESENTATION_STYLE_ASSIGNMENT((#272641)); +#272641 = SURFACE_STYLE_USAGE(.BOTH.,#272642); +#272642 = SURFACE_SIDE_STYLE('',(#272643,#272646)); +#272643 = SURFACE_STYLE_FILL_AREA(#272644); +#272644 = FILL_AREA_STYLE('',(#272645)); +#272645 = FILL_AREA_STYLE_COLOUR('',#270350); +#272646 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272647)); +#272647 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272648 = STYLED_ITEM('color',(#272649),#161150); +#272649 = PRESENTATION_STYLE_ASSIGNMENT((#272650)); +#272650 = SURFACE_STYLE_USAGE(.BOTH.,#272651); +#272651 = SURFACE_SIDE_STYLE('',(#272652,#272655)); +#272652 = SURFACE_STYLE_FILL_AREA(#272653); +#272653 = FILL_AREA_STYLE('',(#272654)); +#272654 = FILL_AREA_STYLE_COLOUR('',#270350); +#272655 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272656)); +#272656 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272657 = STYLED_ITEM('color',(#272658),#161321); +#272658 = PRESENTATION_STYLE_ASSIGNMENT((#272659)); +#272659 = SURFACE_STYLE_USAGE(.BOTH.,#272660); +#272660 = SURFACE_SIDE_STYLE('',(#272661,#272664)); +#272661 = SURFACE_STYLE_FILL_AREA(#272662); +#272662 = FILL_AREA_STYLE('',(#272663)); +#272663 = FILL_AREA_STYLE_COLOUR('',#270350); +#272664 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272665)); +#272665 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272666 = STYLED_ITEM('color',(#272667),#161492); +#272667 = PRESENTATION_STYLE_ASSIGNMENT((#272668)); +#272668 = SURFACE_STYLE_USAGE(.BOTH.,#272669); +#272669 = SURFACE_SIDE_STYLE('',(#272670,#272673)); +#272670 = SURFACE_STYLE_FILL_AREA(#272671); +#272671 = FILL_AREA_STYLE('',(#272672)); +#272672 = FILL_AREA_STYLE_COLOUR('',#270350); +#272673 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272674)); +#272674 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272675 = STYLED_ITEM('color',(#272676),#161663); +#272676 = PRESENTATION_STYLE_ASSIGNMENT((#272677)); +#272677 = SURFACE_STYLE_USAGE(.BOTH.,#272678); +#272678 = SURFACE_SIDE_STYLE('',(#272679,#272682)); +#272679 = SURFACE_STYLE_FILL_AREA(#272680); +#272680 = FILL_AREA_STYLE('',(#272681)); +#272681 = FILL_AREA_STYLE_COLOUR('',#270350); +#272682 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272683)); +#272683 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272684 = STYLED_ITEM('color',(#272685),#161834); +#272685 = PRESENTATION_STYLE_ASSIGNMENT((#272686)); +#272686 = SURFACE_STYLE_USAGE(.BOTH.,#272687); +#272687 = SURFACE_SIDE_STYLE('',(#272688,#272691)); +#272688 = SURFACE_STYLE_FILL_AREA(#272689); +#272689 = FILL_AREA_STYLE('',(#272690)); +#272690 = FILL_AREA_STYLE_COLOUR('',#270350); +#272691 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272692)); +#272692 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272693 = STYLED_ITEM('color',(#272694),#162028); +#272694 = PRESENTATION_STYLE_ASSIGNMENT((#272695)); +#272695 = SURFACE_STYLE_USAGE(.BOTH.,#272696); +#272696 = SURFACE_SIDE_STYLE('',(#272697,#272700)); +#272697 = SURFACE_STYLE_FILL_AREA(#272698); +#272698 = FILL_AREA_STYLE('',(#272699)); +#272699 = FILL_AREA_STYLE_COLOUR('',#270350); +#272700 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272701)); +#272701 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272702 = STYLED_ITEM('color',(#272703),#162231); +#272703 = PRESENTATION_STYLE_ASSIGNMENT((#272704)); +#272704 = SURFACE_STYLE_USAGE(.BOTH.,#272705); +#272705 = SURFACE_SIDE_STYLE('',(#272706,#272709)); +#272706 = SURFACE_STYLE_FILL_AREA(#272707); +#272707 = FILL_AREA_STYLE('',(#272708)); +#272708 = FILL_AREA_STYLE_COLOUR('',#270350); +#272709 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272710)); +#272710 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272711 = STYLED_ITEM('color',(#272712),#162434); +#272712 = PRESENTATION_STYLE_ASSIGNMENT((#272713)); +#272713 = SURFACE_STYLE_USAGE(.BOTH.,#272714); +#272714 = SURFACE_SIDE_STYLE('',(#272715,#272718)); +#272715 = SURFACE_STYLE_FILL_AREA(#272716); +#272716 = FILL_AREA_STYLE('',(#272717)); +#272717 = FILL_AREA_STYLE_COLOUR('',#270350); +#272718 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272719)); +#272719 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272720 = STYLED_ITEM('color',(#272721),#162662); +#272721 = PRESENTATION_STYLE_ASSIGNMENT((#272722)); +#272722 = SURFACE_STYLE_USAGE(.BOTH.,#272723); +#272723 = SURFACE_SIDE_STYLE('',(#272724,#272727)); +#272724 = SURFACE_STYLE_FILL_AREA(#272725); +#272725 = FILL_AREA_STYLE('',(#272726)); +#272726 = FILL_AREA_STYLE_COLOUR('',#270350); +#272727 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272728)); +#272728 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272729 = STYLED_ITEM('color',(#272730),#162883); +#272730 = PRESENTATION_STYLE_ASSIGNMENT((#272731)); +#272731 = SURFACE_STYLE_USAGE(.BOTH.,#272732); +#272732 = SURFACE_SIDE_STYLE('',(#272733,#272736)); +#272733 = SURFACE_STYLE_FILL_AREA(#272734); +#272734 = FILL_AREA_STYLE('',(#272735)); +#272735 = FILL_AREA_STYLE_COLOUR('',#270350); +#272736 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272737)); +#272737 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272738 = STYLED_ITEM('color',(#272739),#163104); +#272739 = PRESENTATION_STYLE_ASSIGNMENT((#272740)); +#272740 = SURFACE_STYLE_USAGE(.BOTH.,#272741); +#272741 = SURFACE_SIDE_STYLE('',(#272742,#272745)); +#272742 = SURFACE_STYLE_FILL_AREA(#272743); +#272743 = FILL_AREA_STYLE('',(#272744)); +#272744 = FILL_AREA_STYLE_COLOUR('',#270350); +#272745 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272746)); +#272746 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272747 = STYLED_ITEM('color',(#272748),#163156); +#272748 = PRESENTATION_STYLE_ASSIGNMENT((#272749)); +#272749 = SURFACE_STYLE_USAGE(.BOTH.,#272750); +#272750 = SURFACE_SIDE_STYLE('',(#272751,#272754)); +#272751 = SURFACE_STYLE_FILL_AREA(#272752); +#272752 = FILL_AREA_STYLE('',(#272753)); +#272753 = FILL_AREA_STYLE_COLOUR('',#270350); +#272754 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272755)); +#272755 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272756 = STYLED_ITEM('color',(#272757),#163298); +#272757 = PRESENTATION_STYLE_ASSIGNMENT((#272758)); +#272758 = SURFACE_STYLE_USAGE(.BOTH.,#272759); +#272759 = SURFACE_SIDE_STYLE('',(#272760,#272763)); +#272760 = SURFACE_STYLE_FILL_AREA(#272761); +#272761 = FILL_AREA_STYLE('',(#272762)); +#272762 = FILL_AREA_STYLE_COLOUR('',#270350); +#272763 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272764)); +#272764 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272765 = STYLED_ITEM('color',(#272766),#163375); +#272766 = PRESENTATION_STYLE_ASSIGNMENT((#272767)); +#272767 = SURFACE_STYLE_USAGE(.BOTH.,#272768); +#272768 = SURFACE_SIDE_STYLE('',(#272769,#272772)); +#272769 = SURFACE_STYLE_FILL_AREA(#272770); +#272770 = FILL_AREA_STYLE('',(#272771)); +#272771 = FILL_AREA_STYLE_COLOUR('',#270350); +#272772 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272773)); +#272773 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272774 = STYLED_ITEM('color',(#272775),#163513); +#272775 = PRESENTATION_STYLE_ASSIGNMENT((#272776)); +#272776 = SURFACE_STYLE_USAGE(.BOTH.,#272777); +#272777 = SURFACE_SIDE_STYLE('',(#272778,#272781)); +#272778 = SURFACE_STYLE_FILL_AREA(#272779); +#272779 = FILL_AREA_STYLE('',(#272780)); +#272780 = FILL_AREA_STYLE_COLOUR('',#270350); +#272781 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272782)); +#272782 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272783 = STYLED_ITEM('color',(#272784),#163581); +#272784 = PRESENTATION_STYLE_ASSIGNMENT((#272785)); +#272785 = SURFACE_STYLE_USAGE(.BOTH.,#272786); +#272786 = SURFACE_SIDE_STYLE('',(#272787,#272790)); +#272787 = SURFACE_STYLE_FILL_AREA(#272788); +#272788 = FILL_AREA_STYLE('',(#272789)); +#272789 = FILL_AREA_STYLE_COLOUR('',#270350); +#272790 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272791)); +#272791 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272792 = STYLED_ITEM('color',(#272793),#163625); +#272793 = PRESENTATION_STYLE_ASSIGNMENT((#272794)); +#272794 = SURFACE_STYLE_USAGE(.BOTH.,#272795); +#272795 = SURFACE_SIDE_STYLE('',(#272796,#272799)); +#272796 = SURFACE_STYLE_FILL_AREA(#272797); +#272797 = FILL_AREA_STYLE('',(#272798)); +#272798 = FILL_AREA_STYLE_COLOUR('',#270350); +#272799 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272800)); +#272800 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272801 = STYLED_ITEM('color',(#272802),#163669); +#272802 = PRESENTATION_STYLE_ASSIGNMENT((#272803)); +#272803 = SURFACE_STYLE_USAGE(.BOTH.,#272804); +#272804 = SURFACE_SIDE_STYLE('',(#272805,#272808)); +#272805 = SURFACE_STYLE_FILL_AREA(#272806); +#272806 = FILL_AREA_STYLE('',(#272807)); +#272807 = FILL_AREA_STYLE_COLOUR('',#270350); +#272808 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272809)); +#272809 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272810 = STYLED_ITEM('color',(#272811),#163820); +#272811 = PRESENTATION_STYLE_ASSIGNMENT((#272812)); +#272812 = SURFACE_STYLE_USAGE(.BOTH.,#272813); +#272813 = SURFACE_SIDE_STYLE('',(#272814,#272817)); +#272814 = SURFACE_STYLE_FILL_AREA(#272815); +#272815 = FILL_AREA_STYLE('',(#272816)); +#272816 = FILL_AREA_STYLE_COLOUR('',#270350); +#272817 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272818)); +#272818 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272819 = STYLED_ITEM('color',(#272820),#163955); +#272820 = PRESENTATION_STYLE_ASSIGNMENT((#272821)); +#272821 = SURFACE_STYLE_USAGE(.BOTH.,#272822); +#272822 = SURFACE_SIDE_STYLE('',(#272823,#272826)); +#272823 = SURFACE_STYLE_FILL_AREA(#272824); +#272824 = FILL_AREA_STYLE('',(#272825)); +#272825 = FILL_AREA_STYLE_COLOUR('',#270350); +#272826 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272827)); +#272827 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272828 = STYLED_ITEM('color',(#272829),#164049); +#272829 = PRESENTATION_STYLE_ASSIGNMENT((#272830)); +#272830 = SURFACE_STYLE_USAGE(.BOTH.,#272831); +#272831 = SURFACE_SIDE_STYLE('',(#272832,#272835)); +#272832 = SURFACE_STYLE_FILL_AREA(#272833); +#272833 = FILL_AREA_STYLE('',(#272834)); +#272834 = FILL_AREA_STYLE_COLOUR('',#270350); +#272835 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272836)); +#272836 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272837 = STYLED_ITEM('color',(#272838),#164093); +#272838 = PRESENTATION_STYLE_ASSIGNMENT((#272839)); +#272839 = SURFACE_STYLE_USAGE(.BOTH.,#272840); +#272840 = SURFACE_SIDE_STYLE('',(#272841,#272844)); +#272841 = SURFACE_STYLE_FILL_AREA(#272842); +#272842 = FILL_AREA_STYLE('',(#272843)); +#272843 = FILL_AREA_STYLE_COLOUR('',#270350); +#272844 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272845)); +#272845 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272846 = STYLED_ITEM('color',(#272847),#164137); +#272847 = PRESENTATION_STYLE_ASSIGNMENT((#272848)); +#272848 = SURFACE_STYLE_USAGE(.BOTH.,#272849); +#272849 = SURFACE_SIDE_STYLE('',(#272850,#272853)); +#272850 = SURFACE_STYLE_FILL_AREA(#272851); +#272851 = FILL_AREA_STYLE('',(#272852)); +#272852 = FILL_AREA_STYLE_COLOUR('',#270350); +#272853 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272854)); +#272854 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272855 = STYLED_ITEM('color',(#272856),#164330); +#272856 = PRESENTATION_STYLE_ASSIGNMENT((#272857)); +#272857 = SURFACE_STYLE_USAGE(.BOTH.,#272858); +#272858 = SURFACE_SIDE_STYLE('',(#272859,#272862)); +#272859 = SURFACE_STYLE_FILL_AREA(#272860); +#272860 = FILL_AREA_STYLE('',(#272861)); +#272861 = FILL_AREA_STYLE_COLOUR('',#270350); +#272862 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272863)); +#272863 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272864 = STYLED_ITEM('color',(#272865),#164660); +#272865 = PRESENTATION_STYLE_ASSIGNMENT((#272866)); +#272866 = SURFACE_STYLE_USAGE(.BOTH.,#272867); +#272867 = SURFACE_SIDE_STYLE('',(#272868,#272871)); +#272868 = SURFACE_STYLE_FILL_AREA(#272869); +#272869 = FILL_AREA_STYLE('',(#272870)); +#272870 = FILL_AREA_STYLE_COLOUR('',#270350); +#272871 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272872)); +#272872 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272873 = STYLED_ITEM('color',(#272874),#164803); +#272874 = PRESENTATION_STYLE_ASSIGNMENT((#272875)); +#272875 = SURFACE_STYLE_USAGE(.BOTH.,#272876); +#272876 = SURFACE_SIDE_STYLE('',(#272877,#272880)); +#272877 = SURFACE_STYLE_FILL_AREA(#272878); +#272878 = FILL_AREA_STYLE('',(#272879)); +#272879 = FILL_AREA_STYLE_COLOUR('',#270350); +#272880 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272881)); +#272881 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272882 = STYLED_ITEM('color',(#272883),#164913); +#272883 = PRESENTATION_STYLE_ASSIGNMENT((#272884)); +#272884 = SURFACE_STYLE_USAGE(.BOTH.,#272885); +#272885 = SURFACE_SIDE_STYLE('',(#272886,#272889)); +#272886 = SURFACE_STYLE_FILL_AREA(#272887); +#272887 = FILL_AREA_STYLE('',(#272888)); +#272888 = FILL_AREA_STYLE_COLOUR('',#270350); +#272889 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272890)); +#272890 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272891 = STYLED_ITEM('color',(#272892),#164957); +#272892 = PRESENTATION_STYLE_ASSIGNMENT((#272893)); +#272893 = SURFACE_STYLE_USAGE(.BOTH.,#272894); +#272894 = SURFACE_SIDE_STYLE('',(#272895,#272898)); +#272895 = SURFACE_STYLE_FILL_AREA(#272896); +#272896 = FILL_AREA_STYLE('',(#272897)); +#272897 = FILL_AREA_STYLE_COLOUR('',#270350); +#272898 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272899)); +#272899 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272900 = STYLED_ITEM('color',(#272901),#165001); +#272901 = PRESENTATION_STYLE_ASSIGNMENT((#272902)); +#272902 = SURFACE_STYLE_USAGE(.BOTH.,#272903); +#272903 = SURFACE_SIDE_STYLE('',(#272904,#272907)); +#272904 = SURFACE_STYLE_FILL_AREA(#272905); +#272905 = FILL_AREA_STYLE('',(#272906)); +#272906 = FILL_AREA_STYLE_COLOUR('',#270350); +#272907 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272908)); +#272908 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272909 = STYLED_ITEM('color',(#272910),#165152); +#272910 = PRESENTATION_STYLE_ASSIGNMENT((#272911)); +#272911 = SURFACE_STYLE_USAGE(.BOTH.,#272912); +#272912 = SURFACE_SIDE_STYLE('',(#272913,#272916)); +#272913 = SURFACE_STYLE_FILL_AREA(#272914); +#272914 = FILL_AREA_STYLE('',(#272915)); +#272915 = FILL_AREA_STYLE_COLOUR('',#270350); +#272916 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272917)); +#272917 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272918 = STYLED_ITEM('color',(#272919),#165204); +#272919 = PRESENTATION_STYLE_ASSIGNMENT((#272920)); +#272920 = SURFACE_STYLE_USAGE(.BOTH.,#272921); +#272921 = SURFACE_SIDE_STYLE('',(#272922,#272925)); +#272922 = SURFACE_STYLE_FILL_AREA(#272923); +#272923 = FILL_AREA_STYLE('',(#272924)); +#272924 = FILL_AREA_STYLE_COLOUR('',#270350); +#272925 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272926)); +#272926 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272927 = STYLED_ITEM('color',(#272928),#165256); +#272928 = PRESENTATION_STYLE_ASSIGNMENT((#272929)); +#272929 = SURFACE_STYLE_USAGE(.BOTH.,#272930); +#272930 = SURFACE_SIDE_STYLE('',(#272931,#272934)); +#272931 = SURFACE_STYLE_FILL_AREA(#272932); +#272932 = FILL_AREA_STYLE('',(#272933)); +#272933 = FILL_AREA_STYLE_COLOUR('',#270350); +#272934 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272935)); +#272935 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272936 = STYLED_ITEM('color',(#272937),#165427); +#272937 = PRESENTATION_STYLE_ASSIGNMENT((#272938)); +#272938 = SURFACE_STYLE_USAGE(.BOTH.,#272939); +#272939 = SURFACE_SIDE_STYLE('',(#272940,#272943)); +#272940 = SURFACE_STYLE_FILL_AREA(#272941); +#272941 = FILL_AREA_STYLE('',(#272942)); +#272942 = FILL_AREA_STYLE_COLOUR('',#270350); +#272943 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272944)); +#272944 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272945 = STYLED_ITEM('color',(#272946),#165630); +#272946 = PRESENTATION_STYLE_ASSIGNMENT((#272947)); +#272947 = SURFACE_STYLE_USAGE(.BOTH.,#272948); +#272948 = SURFACE_SIDE_STYLE('',(#272949,#272952)); +#272949 = SURFACE_STYLE_FILL_AREA(#272950); +#272950 = FILL_AREA_STYLE('',(#272951)); +#272951 = FILL_AREA_STYLE_COLOUR('',#270350); +#272952 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272953)); +#272953 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272954 = STYLED_ITEM('color',(#272955),#165943); +#272955 = PRESENTATION_STYLE_ASSIGNMENT((#272956)); +#272956 = SURFACE_STYLE_USAGE(.BOTH.,#272957); +#272957 = SURFACE_SIDE_STYLE('',(#272958,#272961)); +#272958 = SURFACE_STYLE_FILL_AREA(#272959); +#272959 = FILL_AREA_STYLE('',(#272960)); +#272960 = FILL_AREA_STYLE_COLOUR('',#270350); +#272961 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272962)); +#272962 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272963 = STYLED_ITEM('color',(#272964),#166136); +#272964 = PRESENTATION_STYLE_ASSIGNMENT((#272965)); +#272965 = SURFACE_STYLE_USAGE(.BOTH.,#272966); +#272966 = SURFACE_SIDE_STYLE('',(#272967,#272970)); +#272967 = SURFACE_STYLE_FILL_AREA(#272968); +#272968 = FILL_AREA_STYLE('',(#272969)); +#272969 = FILL_AREA_STYLE_COLOUR('',#270350); +#272970 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272971)); +#272971 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272972 = STYLED_ITEM('color',(#272973),#166330); +#272973 = PRESENTATION_STYLE_ASSIGNMENT((#272974)); +#272974 = SURFACE_STYLE_USAGE(.BOTH.,#272975); +#272975 = SURFACE_SIDE_STYLE('',(#272976,#272979)); +#272976 = SURFACE_STYLE_FILL_AREA(#272977); +#272977 = FILL_AREA_STYLE('',(#272978)); +#272978 = FILL_AREA_STYLE_COLOUR('',#270350); +#272979 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272980)); +#272980 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272981 = STYLED_ITEM('color',(#272982),#166473); +#272982 = PRESENTATION_STYLE_ASSIGNMENT((#272983)); +#272983 = SURFACE_STYLE_USAGE(.BOTH.,#272984); +#272984 = SURFACE_SIDE_STYLE('',(#272985,#272988)); +#272985 = SURFACE_STYLE_FILL_AREA(#272986); +#272986 = FILL_AREA_STYLE('',(#272987)); +#272987 = FILL_AREA_STYLE_COLOUR('',#270350); +#272988 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272989)); +#272989 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272990 = STYLED_ITEM('color',(#272991),#166517); +#272991 = PRESENTATION_STYLE_ASSIGNMENT((#272992)); +#272992 = SURFACE_STYLE_USAGE(.BOTH.,#272993); +#272993 = SURFACE_SIDE_STYLE('',(#272994,#272997)); +#272994 = SURFACE_STYLE_FILL_AREA(#272995); +#272995 = FILL_AREA_STYLE('',(#272996)); +#272996 = FILL_AREA_STYLE_COLOUR('',#270350); +#272997 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#272998)); +#272998 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272999 = STYLED_ITEM('color',(#273000),#166561); +#273000 = PRESENTATION_STYLE_ASSIGNMENT((#273001)); +#273001 = SURFACE_STYLE_USAGE(.BOTH.,#273002); +#273002 = SURFACE_SIDE_STYLE('',(#273003,#273006)); +#273003 = SURFACE_STYLE_FILL_AREA(#273004); +#273004 = FILL_AREA_STYLE('',(#273005)); +#273005 = FILL_AREA_STYLE_COLOUR('',#270350); +#273006 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273007)); +#273007 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273008 = STYLED_ITEM('color',(#273009),#166605); +#273009 = PRESENTATION_STYLE_ASSIGNMENT((#273010)); +#273010 = SURFACE_STYLE_USAGE(.BOTH.,#273011); +#273011 = SURFACE_SIDE_STYLE('',(#273012,#273015)); +#273012 = SURFACE_STYLE_FILL_AREA(#273013); +#273013 = FILL_AREA_STYLE('',(#273014)); +#273014 = FILL_AREA_STYLE_COLOUR('',#270350); +#273015 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273016)); +#273016 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273017 = STYLED_ITEM('color',(#273018),#166649); +#273018 = PRESENTATION_STYLE_ASSIGNMENT((#273019)); +#273019 = SURFACE_STYLE_USAGE(.BOTH.,#273020); +#273020 = SURFACE_SIDE_STYLE('',(#273021,#273024)); +#273021 = SURFACE_STYLE_FILL_AREA(#273022); +#273022 = FILL_AREA_STYLE('',(#273023)); +#273023 = FILL_AREA_STYLE_COLOUR('',#270350); +#273024 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273025)); +#273025 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273026 = STYLED_ITEM('color',(#273027),#166693); +#273027 = PRESENTATION_STYLE_ASSIGNMENT((#273028)); +#273028 = SURFACE_STYLE_USAGE(.BOTH.,#273029); +#273029 = SURFACE_SIDE_STYLE('',(#273030,#273033)); +#273030 = SURFACE_STYLE_FILL_AREA(#273031); +#273031 = FILL_AREA_STYLE('',(#273032)); +#273032 = FILL_AREA_STYLE_COLOUR('',#270350); +#273033 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273034)); +#273034 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273035 = STYLED_ITEM('color',(#273036),#166737); +#273036 = PRESENTATION_STYLE_ASSIGNMENT((#273037)); +#273037 = SURFACE_STYLE_USAGE(.BOTH.,#273038); +#273038 = SURFACE_SIDE_STYLE('',(#273039,#273042)); +#273039 = SURFACE_STYLE_FILL_AREA(#273040); +#273040 = FILL_AREA_STYLE('',(#273041)); +#273041 = FILL_AREA_STYLE_COLOUR('',#270350); +#273042 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273043)); +#273043 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273044 = STYLED_ITEM('color',(#273045),#166781); +#273045 = PRESENTATION_STYLE_ASSIGNMENT((#273046)); +#273046 = SURFACE_STYLE_USAGE(.BOTH.,#273047); +#273047 = SURFACE_SIDE_STYLE('',(#273048,#273051)); +#273048 = SURFACE_STYLE_FILL_AREA(#273049); +#273049 = FILL_AREA_STYLE('',(#273050)); +#273050 = FILL_AREA_STYLE_COLOUR('',#270350); +#273051 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273052)); +#273052 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273053 = STYLED_ITEM('color',(#273054),#166825); +#273054 = PRESENTATION_STYLE_ASSIGNMENT((#273055)); +#273055 = SURFACE_STYLE_USAGE(.BOTH.,#273056); +#273056 = SURFACE_SIDE_STYLE('',(#273057,#273060)); +#273057 = SURFACE_STYLE_FILL_AREA(#273058); +#273058 = FILL_AREA_STYLE('',(#273059)); +#273059 = FILL_AREA_STYLE_COLOUR('',#270350); +#273060 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273061)); +#273061 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273062 = STYLED_ITEM('color',(#273063),#166901); +#273063 = PRESENTATION_STYLE_ASSIGNMENT((#273064)); +#273064 = SURFACE_STYLE_USAGE(.BOTH.,#273065); +#273065 = SURFACE_SIDE_STYLE('',(#273066,#273069)); +#273066 = SURFACE_STYLE_FILL_AREA(#273067); +#273067 = FILL_AREA_STYLE('',(#273068)); +#273068 = FILL_AREA_STYLE_COLOUR('',#270350); +#273069 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273070)); +#273070 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273071 = STYLED_ITEM('color',(#273072),#167043); +#273072 = PRESENTATION_STYLE_ASSIGNMENT((#273073)); +#273073 = SURFACE_STYLE_USAGE(.BOTH.,#273074); +#273074 = SURFACE_SIDE_STYLE('',(#273075,#273078)); +#273075 = SURFACE_STYLE_FILL_AREA(#273076); +#273076 = FILL_AREA_STYLE('',(#273077)); +#273077 = FILL_AREA_STYLE_COLOUR('',#270350); +#273078 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273079)); +#273079 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273080 = STYLED_ITEM('color',(#273081),#167210); +#273081 = PRESENTATION_STYLE_ASSIGNMENT((#273082)); +#273082 = SURFACE_STYLE_USAGE(.BOTH.,#273083); +#273083 = SURFACE_SIDE_STYLE('',(#273084,#273087)); +#273084 = SURFACE_STYLE_FILL_AREA(#273085); +#273085 = FILL_AREA_STYLE('',(#273086)); +#273086 = FILL_AREA_STYLE_COLOUR('',#270350); +#273087 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273088)); +#273088 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273089 = STYLED_ITEM('color',(#273090),#167403); +#273090 = PRESENTATION_STYLE_ASSIGNMENT((#273091)); +#273091 = SURFACE_STYLE_USAGE(.BOTH.,#273092); +#273092 = SURFACE_SIDE_STYLE('',(#273093,#273096)); +#273093 = SURFACE_STYLE_FILL_AREA(#273094); +#273094 = FILL_AREA_STYLE('',(#273095)); +#273095 = FILL_AREA_STYLE_COLOUR('',#270350); +#273096 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273097)); +#273097 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273098 = STYLED_ITEM('color',(#273099),#167596); +#273099 = PRESENTATION_STYLE_ASSIGNMENT((#273100)); +#273100 = SURFACE_STYLE_USAGE(.BOTH.,#273101); +#273101 = SURFACE_SIDE_STYLE('',(#273102,#273105)); +#273102 = SURFACE_STYLE_FILL_AREA(#273103); +#273103 = FILL_AREA_STYLE('',(#273104)); +#273104 = FILL_AREA_STYLE_COLOUR('',#270350); +#273105 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273106)); +#273106 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273107 = STYLED_ITEM('color',(#273108),#167790); +#273108 = PRESENTATION_STYLE_ASSIGNMENT((#273109)); +#273109 = SURFACE_STYLE_USAGE(.BOTH.,#273110); +#273110 = SURFACE_SIDE_STYLE('',(#273111,#273114)); +#273111 = SURFACE_STYLE_FILL_AREA(#273112); +#273112 = FILL_AREA_STYLE('',(#273113)); +#273113 = FILL_AREA_STYLE_COLOUR('',#270350); +#273114 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273115)); +#273115 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273116 = STYLED_ITEM('color',(#273117),#167984); +#273117 = PRESENTATION_STYLE_ASSIGNMENT((#273118)); +#273118 = SURFACE_STYLE_USAGE(.BOTH.,#273119); +#273119 = SURFACE_SIDE_STYLE('',(#273120,#273123)); +#273120 = SURFACE_STYLE_FILL_AREA(#273121); +#273121 = FILL_AREA_STYLE('',(#273122)); +#273122 = FILL_AREA_STYLE_COLOUR('',#270350); +#273123 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273124)); +#273124 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273125 = STYLED_ITEM('color',(#273126),#168178); +#273126 = PRESENTATION_STYLE_ASSIGNMENT((#273127)); +#273127 = SURFACE_STYLE_USAGE(.BOTH.,#273128); +#273128 = SURFACE_SIDE_STYLE('',(#273129,#273132)); +#273129 = SURFACE_STYLE_FILL_AREA(#273130); +#273130 = FILL_AREA_STYLE('',(#273131)); +#273131 = FILL_AREA_STYLE_COLOUR('',#270350); +#273132 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273133)); +#273133 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273134 = STYLED_ITEM('color',(#273135),#168222); +#273135 = PRESENTATION_STYLE_ASSIGNMENT((#273136)); +#273136 = SURFACE_STYLE_USAGE(.BOTH.,#273137); +#273137 = SURFACE_SIDE_STYLE('',(#273138,#273141)); +#273138 = SURFACE_STYLE_FILL_AREA(#273139); +#273139 = FILL_AREA_STYLE('',(#273140)); +#273140 = FILL_AREA_STYLE_COLOUR('',#270350); +#273141 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273142)); +#273142 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273143 = STYLED_ITEM('color',(#273144),#168266); +#273144 = PRESENTATION_STYLE_ASSIGNMENT((#273145)); +#273145 = SURFACE_STYLE_USAGE(.BOTH.,#273146); +#273146 = SURFACE_SIDE_STYLE('',(#273147,#273150)); +#273147 = SURFACE_STYLE_FILL_AREA(#273148); +#273148 = FILL_AREA_STYLE('',(#273149)); +#273149 = FILL_AREA_STYLE_COLOUR('',#270350); +#273150 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273151)); +#273151 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273152 = STYLED_ITEM('color',(#273153),#168310); +#273153 = PRESENTATION_STYLE_ASSIGNMENT((#273154)); +#273154 = SURFACE_STYLE_USAGE(.BOTH.,#273155); +#273155 = SURFACE_SIDE_STYLE('',(#273156,#273159)); +#273156 = SURFACE_STYLE_FILL_AREA(#273157); +#273157 = FILL_AREA_STYLE('',(#273158)); +#273158 = FILL_AREA_STYLE_COLOUR('',#270350); +#273159 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273160)); +#273160 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273161 = STYLED_ITEM('color',(#273162),#168354); +#273162 = PRESENTATION_STYLE_ASSIGNMENT((#273163)); +#273163 = SURFACE_STYLE_USAGE(.BOTH.,#273164); +#273164 = SURFACE_SIDE_STYLE('',(#273165,#273168)); +#273165 = SURFACE_STYLE_FILL_AREA(#273166); +#273166 = FILL_AREA_STYLE('',(#273167)); +#273167 = FILL_AREA_STYLE_COLOUR('',#270350); +#273168 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273169)); +#273169 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273170 = STYLED_ITEM('color',(#273171),#168398); +#273171 = PRESENTATION_STYLE_ASSIGNMENT((#273172)); +#273172 = SURFACE_STYLE_USAGE(.BOTH.,#273173); +#273173 = SURFACE_SIDE_STYLE('',(#273174,#273177)); +#273174 = SURFACE_STYLE_FILL_AREA(#273175); +#273175 = FILL_AREA_STYLE('',(#273176)); +#273176 = FILL_AREA_STYLE_COLOUR('',#270350); +#273177 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273178)); +#273178 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273179 = STYLED_ITEM('color',(#273180),#168442); +#273180 = PRESENTATION_STYLE_ASSIGNMENT((#273181)); +#273181 = SURFACE_STYLE_USAGE(.BOTH.,#273182); +#273182 = SURFACE_SIDE_STYLE('',(#273183,#273186)); +#273183 = SURFACE_STYLE_FILL_AREA(#273184); +#273184 = FILL_AREA_STYLE('',(#273185)); +#273185 = FILL_AREA_STYLE_COLOUR('',#270350); +#273186 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273187)); +#273187 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273188 = STYLED_ITEM('color',(#273189),#168609); +#273189 = PRESENTATION_STYLE_ASSIGNMENT((#273190)); +#273190 = SURFACE_STYLE_USAGE(.BOTH.,#273191); +#273191 = SURFACE_SIDE_STYLE('',(#273192,#273195)); +#273192 = SURFACE_STYLE_FILL_AREA(#273193); +#273193 = FILL_AREA_STYLE('',(#273194)); +#273194 = FILL_AREA_STYLE_COLOUR('',#270350); +#273195 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273196)); +#273196 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273197 = STYLED_ITEM('color',(#273198),#168735); +#273198 = PRESENTATION_STYLE_ASSIGNMENT((#273199)); +#273199 = SURFACE_STYLE_USAGE(.BOTH.,#273200); +#273200 = SURFACE_SIDE_STYLE('',(#273201,#273204)); +#273201 = SURFACE_STYLE_FILL_AREA(#273202); +#273202 = FILL_AREA_STYLE('',(#273203)); +#273203 = FILL_AREA_STYLE_COLOUR('',#270350); +#273204 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273205)); +#273205 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273206 = STYLED_ITEM('color',(#273207),#168942); +#273207 = PRESENTATION_STYLE_ASSIGNMENT((#273208)); +#273208 = SURFACE_STYLE_USAGE(.BOTH.,#273209); +#273209 = SURFACE_SIDE_STYLE('',(#273210,#273213)); +#273210 = SURFACE_STYLE_FILL_AREA(#273211); +#273211 = FILL_AREA_STYLE('',(#273212)); +#273212 = FILL_AREA_STYLE_COLOUR('',#270350); +#273213 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273214)); +#273214 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273215 = STYLED_ITEM('color',(#273216),#169136); +#273216 = PRESENTATION_STYLE_ASSIGNMENT((#273217)); +#273217 = SURFACE_STYLE_USAGE(.BOTH.,#273218); +#273218 = SURFACE_SIDE_STYLE('',(#273219,#273222)); +#273219 = SURFACE_STYLE_FILL_AREA(#273220); +#273220 = FILL_AREA_STYLE('',(#273221)); +#273221 = FILL_AREA_STYLE_COLOUR('',#270350); +#273222 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273223)); +#273223 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273224 = STYLED_ITEM('color',(#273225),#169314); +#273225 = PRESENTATION_STYLE_ASSIGNMENT((#273226)); +#273226 = SURFACE_STYLE_USAGE(.BOTH.,#273227); +#273227 = SURFACE_SIDE_STYLE('',(#273228,#273231)); +#273228 = SURFACE_STYLE_FILL_AREA(#273229); +#273229 = FILL_AREA_STYLE('',(#273230)); +#273230 = FILL_AREA_STYLE_COLOUR('',#270350); +#273231 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273232)); +#273232 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273233 = STYLED_ITEM('color',(#273234),#169496); +#273234 = PRESENTATION_STYLE_ASSIGNMENT((#273235)); +#273235 = SURFACE_STYLE_USAGE(.BOTH.,#273236); +#273236 = SURFACE_SIDE_STYLE('',(#273237,#273240)); +#273237 = SURFACE_STYLE_FILL_AREA(#273238); +#273238 = FILL_AREA_STYLE('',(#273239)); +#273239 = FILL_AREA_STYLE_COLOUR('',#270350); +#273240 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273241)); +#273241 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273242 = STYLED_ITEM('color',(#273243),#169678); +#273243 = PRESENTATION_STYLE_ASSIGNMENT((#273244)); +#273244 = SURFACE_STYLE_USAGE(.BOTH.,#273245); +#273245 = SURFACE_SIDE_STYLE('',(#273246,#273249)); +#273246 = SURFACE_STYLE_FILL_AREA(#273247); +#273247 = FILL_AREA_STYLE('',(#273248)); +#273248 = FILL_AREA_STYLE_COLOUR('',#270350); +#273249 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273250)); +#273250 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273251 = STYLED_ITEM('color',(#273252),#169820); +#273252 = PRESENTATION_STYLE_ASSIGNMENT((#273253)); +#273253 = SURFACE_STYLE_USAGE(.BOTH.,#273254); +#273254 = SURFACE_SIDE_STYLE('',(#273255,#273258)); +#273255 = SURFACE_STYLE_FILL_AREA(#273256); +#273256 = FILL_AREA_STYLE('',(#273257)); +#273257 = FILL_AREA_STYLE_COLOUR('',#270350); +#273258 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273259)); +#273259 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273260 = STYLED_ITEM('color',(#273261),#169987); +#273261 = PRESENTATION_STYLE_ASSIGNMENT((#273262)); +#273262 = SURFACE_STYLE_USAGE(.BOTH.,#273263); +#273263 = SURFACE_SIDE_STYLE('',(#273264,#273267)); +#273264 = SURFACE_STYLE_FILL_AREA(#273265); +#273265 = FILL_AREA_STYLE('',(#273266)); +#273266 = FILL_AREA_STYLE_COLOUR('',#270350); +#273267 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273268)); +#273268 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273269 = STYLED_ITEM('color',(#273270),#170158); +#273270 = PRESENTATION_STYLE_ASSIGNMENT((#273271)); +#273271 = SURFACE_STYLE_USAGE(.BOTH.,#273272); +#273272 = SURFACE_SIDE_STYLE('',(#273273,#273276)); +#273273 = SURFACE_STYLE_FILL_AREA(#273274); +#273274 = FILL_AREA_STYLE('',(#273275)); +#273275 = FILL_AREA_STYLE_COLOUR('',#270350); +#273276 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273277)); +#273277 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273278 = STYLED_ITEM('color',(#273279),#170329); +#273279 = PRESENTATION_STYLE_ASSIGNMENT((#273280)); +#273280 = SURFACE_STYLE_USAGE(.BOTH.,#273281); +#273281 = SURFACE_SIDE_STYLE('',(#273282,#273285)); +#273282 = SURFACE_STYLE_FILL_AREA(#273283); +#273283 = FILL_AREA_STYLE('',(#273284)); +#273284 = FILL_AREA_STYLE_COLOUR('',#270350); +#273285 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273286)); +#273286 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273287 = STYLED_ITEM('color',(#273288),#170500); +#273288 = PRESENTATION_STYLE_ASSIGNMENT((#273289)); +#273289 = SURFACE_STYLE_USAGE(.BOTH.,#273290); +#273290 = SURFACE_SIDE_STYLE('',(#273291,#273294)); +#273291 = SURFACE_STYLE_FILL_AREA(#273292); +#273292 = FILL_AREA_STYLE('',(#273293)); +#273293 = FILL_AREA_STYLE_COLOUR('',#270350); +#273294 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273295)); +#273295 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273296 = STYLED_ITEM('color',(#273297),#170671); +#273297 = PRESENTATION_STYLE_ASSIGNMENT((#273298)); +#273298 = SURFACE_STYLE_USAGE(.BOTH.,#273299); +#273299 = SURFACE_SIDE_STYLE('',(#273300,#273303)); +#273300 = SURFACE_STYLE_FILL_AREA(#273301); +#273301 = FILL_AREA_STYLE('',(#273302)); +#273302 = FILL_AREA_STYLE_COLOUR('',#270350); +#273303 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273304)); +#273304 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273305 = STYLED_ITEM('color',(#273306),#170842); +#273306 = PRESENTATION_STYLE_ASSIGNMENT((#273307)); +#273307 = SURFACE_STYLE_USAGE(.BOTH.,#273308); +#273308 = SURFACE_SIDE_STYLE('',(#273309,#273312)); +#273309 = SURFACE_STYLE_FILL_AREA(#273310); +#273310 = FILL_AREA_STYLE('',(#273311)); +#273311 = FILL_AREA_STYLE_COLOUR('',#270350); +#273312 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273313)); +#273313 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273314 = STYLED_ITEM('color',(#273315),#171013); +#273315 = PRESENTATION_STYLE_ASSIGNMENT((#273316)); +#273316 = SURFACE_STYLE_USAGE(.BOTH.,#273317); +#273317 = SURFACE_SIDE_STYLE('',(#273318,#273321)); +#273318 = SURFACE_STYLE_FILL_AREA(#273319); +#273319 = FILL_AREA_STYLE('',(#273320)); +#273320 = FILL_AREA_STYLE_COLOUR('',#270350); +#273321 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273322)); +#273322 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273323 = STYLED_ITEM('color',(#273324),#171306); +#273324 = PRESENTATION_STYLE_ASSIGNMENT((#273325)); +#273325 = SURFACE_STYLE_USAGE(.BOTH.,#273326); +#273326 = SURFACE_SIDE_STYLE('',(#273327,#273330)); +#273327 = SURFACE_STYLE_FILL_AREA(#273328); +#273328 = FILL_AREA_STYLE('',(#273329)); +#273329 = FILL_AREA_STYLE_COLOUR('',#270350); +#273330 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273331)); +#273331 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273332 = STYLED_ITEM('color',(#273333),#171509); +#273333 = PRESENTATION_STYLE_ASSIGNMENT((#273334)); +#273334 = SURFACE_STYLE_USAGE(.BOTH.,#273335); +#273335 = SURFACE_SIDE_STYLE('',(#273336,#273339)); +#273336 = SURFACE_STYLE_FILL_AREA(#273337); +#273337 = FILL_AREA_STYLE('',(#273338)); +#273338 = FILL_AREA_STYLE_COLOUR('',#270350); +#273339 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273340)); +#273340 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273341 = STYLED_ITEM('color',(#273342),#171712); +#273342 = PRESENTATION_STYLE_ASSIGNMENT((#273343)); +#273343 = SURFACE_STYLE_USAGE(.BOTH.,#273344); +#273344 = SURFACE_SIDE_STYLE('',(#273345,#273348)); +#273345 = SURFACE_STYLE_FILL_AREA(#273346); +#273346 = FILL_AREA_STYLE('',(#273347)); +#273347 = FILL_AREA_STYLE_COLOUR('',#270350); +#273348 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273349)); +#273349 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273350 = STYLED_ITEM('color',(#273351),#171915); +#273351 = PRESENTATION_STYLE_ASSIGNMENT((#273352)); +#273352 = SURFACE_STYLE_USAGE(.BOTH.,#273353); +#273353 = SURFACE_SIDE_STYLE('',(#273354,#273357)); +#273354 = SURFACE_STYLE_FILL_AREA(#273355); +#273355 = FILL_AREA_STYLE('',(#273356)); +#273356 = FILL_AREA_STYLE_COLOUR('',#270350); +#273357 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273358)); +#273358 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273359 = STYLED_ITEM('color',(#273360),#172127); +#273360 = PRESENTATION_STYLE_ASSIGNMENT((#273361)); +#273361 = SURFACE_STYLE_USAGE(.BOTH.,#273362); +#273362 = SURFACE_SIDE_STYLE('',(#273363,#273366)); +#273363 = SURFACE_STYLE_FILL_AREA(#273364); +#273364 = FILL_AREA_STYLE('',(#273365)); +#273365 = FILL_AREA_STYLE_COLOUR('',#270350); +#273366 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273367)); +#273367 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273368 = STYLED_ITEM('color',(#273369),#172348); +#273369 = PRESENTATION_STYLE_ASSIGNMENT((#273370)); +#273370 = SURFACE_STYLE_USAGE(.BOTH.,#273371); +#273371 = SURFACE_SIDE_STYLE('',(#273372,#273375)); +#273372 = SURFACE_STYLE_FILL_AREA(#273373); +#273373 = FILL_AREA_STYLE('',(#273374)); +#273374 = FILL_AREA_STYLE_COLOUR('',#270350); +#273375 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273376)); +#273376 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273377 = STYLED_ITEM('color',(#273378),#172560); +#273378 = PRESENTATION_STYLE_ASSIGNMENT((#273379)); +#273379 = SURFACE_STYLE_USAGE(.BOTH.,#273380); +#273380 = SURFACE_SIDE_STYLE('',(#273381,#273384)); +#273381 = SURFACE_STYLE_FILL_AREA(#273382); +#273382 = FILL_AREA_STYLE('',(#273383)); +#273383 = FILL_AREA_STYLE_COLOUR('',#270350); +#273384 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273385)); +#273385 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273386 = STYLED_ITEM('color',(#273387),#172647); +#273387 = PRESENTATION_STYLE_ASSIGNMENT((#273388)); +#273388 = SURFACE_STYLE_USAGE(.BOTH.,#273389); +#273389 = SURFACE_SIDE_STYLE('',(#273390,#273393)); +#273390 = SURFACE_STYLE_FILL_AREA(#273391); +#273391 = FILL_AREA_STYLE('',(#273392)); +#273392 = FILL_AREA_STYLE_COLOUR('',#270350); +#273393 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273394)); +#273394 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273395 = STYLED_ITEM('color',(#273396),#172867); +#273396 = PRESENTATION_STYLE_ASSIGNMENT((#273397)); +#273397 = SURFACE_STYLE_USAGE(.BOTH.,#273398); +#273398 = SURFACE_SIDE_STYLE('',(#273399,#273402)); +#273399 = SURFACE_STYLE_FILL_AREA(#273400); +#273400 = FILL_AREA_STYLE('',(#273401)); +#273401 = FILL_AREA_STYLE_COLOUR('',#270350); +#273402 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273403)); +#273403 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273404 = STYLED_ITEM('color',(#273405),#172911); +#273405 = PRESENTATION_STYLE_ASSIGNMENT((#273406)); +#273406 = SURFACE_STYLE_USAGE(.BOTH.,#273407); +#273407 = SURFACE_SIDE_STYLE('',(#273408,#273411)); +#273408 = SURFACE_STYLE_FILL_AREA(#273409); +#273409 = FILL_AREA_STYLE('',(#273410)); +#273410 = FILL_AREA_STYLE_COLOUR('',#270350); +#273411 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273412)); +#273412 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273413 = STYLED_ITEM('color',(#273414),#173005); +#273414 = PRESENTATION_STYLE_ASSIGNMENT((#273415)); +#273415 = SURFACE_STYLE_USAGE(.BOTH.,#273416); +#273416 = SURFACE_SIDE_STYLE('',(#273417,#273420)); +#273417 = SURFACE_STYLE_FILL_AREA(#273418); +#273418 = FILL_AREA_STYLE('',(#273419)); +#273419 = FILL_AREA_STYLE_COLOUR('',#270350); +#273420 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273421)); +#273421 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273422 = STYLED_ITEM('color',(#273423),#173049); +#273423 = PRESENTATION_STYLE_ASSIGNMENT((#273424)); +#273424 = SURFACE_STYLE_USAGE(.BOTH.,#273425); +#273425 = SURFACE_SIDE_STYLE('',(#273426,#273429)); +#273426 = SURFACE_STYLE_FILL_AREA(#273427); +#273427 = FILL_AREA_STYLE('',(#273428)); +#273428 = FILL_AREA_STYLE_COLOUR('',#270350); +#273429 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273430)); +#273430 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273431 = STYLED_ITEM('color',(#273432),#173093); +#273432 = PRESENTATION_STYLE_ASSIGNMENT((#273433)); +#273433 = SURFACE_STYLE_USAGE(.BOTH.,#273434); +#273434 = SURFACE_SIDE_STYLE('',(#273435,#273438)); +#273435 = SURFACE_STYLE_FILL_AREA(#273436); +#273436 = FILL_AREA_STYLE('',(#273437)); +#273437 = FILL_AREA_STYLE_COLOUR('',#270350); +#273438 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273439)); +#273439 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273440 = STYLED_ITEM('color',(#273441),#173264); +#273441 = PRESENTATION_STYLE_ASSIGNMENT((#273442)); +#273442 = SURFACE_STYLE_USAGE(.BOTH.,#273443); +#273443 = SURFACE_SIDE_STYLE('',(#273444,#273447)); +#273444 = SURFACE_STYLE_FILL_AREA(#273445); +#273445 = FILL_AREA_STYLE('',(#273446)); +#273446 = FILL_AREA_STYLE_COLOUR('',#270350); +#273447 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273448)); +#273448 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273449 = STYLED_ITEM('color',(#273450),#173333); +#273450 = PRESENTATION_STYLE_ASSIGNMENT((#273451)); +#273451 = SURFACE_STYLE_USAGE(.BOTH.,#273452); +#273452 = SURFACE_SIDE_STYLE('',(#273453,#273456)); +#273453 = SURFACE_STYLE_FILL_AREA(#273454); +#273454 = FILL_AREA_STYLE('',(#273455)); +#273455 = FILL_AREA_STYLE_COLOUR('',#270350); +#273456 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273457)); +#273457 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273458 = STYLED_ITEM('color',(#273459),#173577); +#273459 = PRESENTATION_STYLE_ASSIGNMENT((#273460)); +#273460 = SURFACE_STYLE_USAGE(.BOTH.,#273461); +#273461 = SURFACE_SIDE_STYLE('',(#273462,#273465)); +#273462 = SURFACE_STYLE_FILL_AREA(#273463); +#273463 = FILL_AREA_STYLE('',(#273464)); +#273464 = FILL_AREA_STYLE_COLOUR('',#270350); +#273465 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273466)); +#273466 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273467 = STYLED_ITEM('color',(#273468),#173744); +#273468 = PRESENTATION_STYLE_ASSIGNMENT((#273469)); +#273469 = SURFACE_STYLE_USAGE(.BOTH.,#273470); +#273470 = SURFACE_SIDE_STYLE('',(#273471,#273474)); +#273471 = SURFACE_STYLE_FILL_AREA(#273472); +#273472 = FILL_AREA_STYLE('',(#273473)); +#273473 = FILL_AREA_STYLE_COLOUR('',#270350); +#273474 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273475)); +#273475 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273476 = STYLED_ITEM('color',(#273477),#173984); +#273477 = PRESENTATION_STYLE_ASSIGNMENT((#273478)); +#273478 = SURFACE_STYLE_USAGE(.BOTH.,#273479); +#273479 = SURFACE_SIDE_STYLE('',(#273480,#273483)); +#273480 = SURFACE_STYLE_FILL_AREA(#273481); +#273481 = FILL_AREA_STYLE('',(#273482)); +#273482 = FILL_AREA_STYLE_COLOUR('',#270350); +#273483 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273484)); +#273484 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273485 = STYLED_ITEM('color',(#273486),#174078); +#273486 = PRESENTATION_STYLE_ASSIGNMENT((#273487)); +#273487 = SURFACE_STYLE_USAGE(.BOTH.,#273488); +#273488 = SURFACE_SIDE_STYLE('',(#273489,#273492)); +#273489 = SURFACE_STYLE_FILL_AREA(#273490); +#273490 = FILL_AREA_STYLE('',(#273491)); +#273491 = FILL_AREA_STYLE_COLOUR('',#270350); +#273492 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273493)); +#273493 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273494 = STYLED_ITEM('color',(#273495),#174216); +#273495 = PRESENTATION_STYLE_ASSIGNMENT((#273496)); +#273496 = SURFACE_STYLE_USAGE(.BOTH.,#273497); +#273497 = SURFACE_SIDE_STYLE('',(#273498,#273501)); +#273498 = SURFACE_STYLE_FILL_AREA(#273499); +#273499 = FILL_AREA_STYLE('',(#273500)); +#273500 = FILL_AREA_STYLE_COLOUR('',#270350); +#273501 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273502)); +#273502 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273503 = STYLED_ITEM('color',(#273504),#174359); +#273504 = PRESENTATION_STYLE_ASSIGNMENT((#273505)); +#273505 = SURFACE_STYLE_USAGE(.BOTH.,#273506); +#273506 = SURFACE_SIDE_STYLE('',(#273507,#273510)); +#273507 = SURFACE_STYLE_FILL_AREA(#273508); +#273508 = FILL_AREA_STYLE('',(#273509)); +#273509 = FILL_AREA_STYLE_COLOUR('',#270350); +#273510 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273511)); +#273511 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273512 = STYLED_ITEM('color',(#273513),#174436); +#273513 = PRESENTATION_STYLE_ASSIGNMENT((#273514)); +#273514 = SURFACE_STYLE_USAGE(.BOTH.,#273515); +#273515 = SURFACE_SIDE_STYLE('',(#273516,#273519)); +#273516 = SURFACE_STYLE_FILL_AREA(#273517); +#273517 = FILL_AREA_STYLE('',(#273518)); +#273518 = FILL_AREA_STYLE_COLOUR('',#270350); +#273519 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273520)); +#273520 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273521 = STYLED_ITEM('color',(#273522),#174538); +#273522 = PRESENTATION_STYLE_ASSIGNMENT((#273523)); +#273523 = SURFACE_STYLE_USAGE(.BOTH.,#273524); +#273524 = SURFACE_SIDE_STYLE('',(#273525,#273528)); +#273525 = SURFACE_STYLE_FILL_AREA(#273526); +#273526 = FILL_AREA_STYLE('',(#273527)); +#273527 = FILL_AREA_STYLE_COLOUR('',#270350); +#273528 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273529)); +#273529 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273530 = STYLED_ITEM('color',(#273531),#174986); +#273531 = PRESENTATION_STYLE_ASSIGNMENT((#273532)); +#273532 = SURFACE_STYLE_USAGE(.BOTH.,#273533); +#273533 = SURFACE_SIDE_STYLE('',(#273534,#273537)); +#273534 = SURFACE_STYLE_FILL_AREA(#273535); +#273535 = FILL_AREA_STYLE('',(#273536)); +#273536 = FILL_AREA_STYLE_COLOUR('',#270350); +#273537 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273538)); +#273538 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273539 = STYLED_ITEM('color',(#273540),#175030); +#273540 = PRESENTATION_STYLE_ASSIGNMENT((#273541)); +#273541 = SURFACE_STYLE_USAGE(.BOTH.,#273542); +#273542 = SURFACE_SIDE_STYLE('',(#273543,#273546)); +#273543 = SURFACE_STYLE_FILL_AREA(#273544); +#273544 = FILL_AREA_STYLE('',(#273545)); +#273545 = FILL_AREA_STYLE_COLOUR('',#270350); +#273546 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273547)); +#273547 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273548 = STYLED_ITEM('color',(#273549),#175223); +#273549 = PRESENTATION_STYLE_ASSIGNMENT((#273550)); +#273550 = SURFACE_STYLE_USAGE(.BOTH.,#273551); +#273551 = SURFACE_SIDE_STYLE('',(#273552,#273555)); +#273552 = SURFACE_STYLE_FILL_AREA(#273553); +#273553 = FILL_AREA_STYLE('',(#273554)); +#273554 = FILL_AREA_STYLE_COLOUR('',#270350); +#273555 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273556)); +#273556 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273557 = STYLED_ITEM('color',(#273558),#175267); +#273558 = PRESENTATION_STYLE_ASSIGNMENT((#273559)); +#273559 = SURFACE_STYLE_USAGE(.BOTH.,#273560); +#273560 = SURFACE_SIDE_STYLE('',(#273561,#273564)); +#273561 = SURFACE_STYLE_FILL_AREA(#273562); +#273562 = FILL_AREA_STYLE('',(#273563)); +#273563 = FILL_AREA_STYLE_COLOUR('',#270350); +#273564 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273565)); +#273565 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273566 = STYLED_ITEM('color',(#273567),#175530); +#273567 = PRESENTATION_STYLE_ASSIGNMENT((#273568)); +#273568 = SURFACE_STYLE_USAGE(.BOTH.,#273569); +#273569 = SURFACE_SIDE_STYLE('',(#273570,#273573)); +#273570 = SURFACE_STYLE_FILL_AREA(#273571); +#273571 = FILL_AREA_STYLE('',(#273572)); +#273572 = FILL_AREA_STYLE_COLOUR('',#270350); +#273573 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273574)); +#273574 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273575 = STYLED_ITEM('color',(#273576),#175723); +#273576 = PRESENTATION_STYLE_ASSIGNMENT((#273577)); +#273577 = SURFACE_STYLE_USAGE(.BOTH.,#273578); +#273578 = SURFACE_SIDE_STYLE('',(#273579,#273582)); +#273579 = SURFACE_STYLE_FILL_AREA(#273580); +#273580 = FILL_AREA_STYLE('',(#273581)); +#273581 = FILL_AREA_STYLE_COLOUR('',#270350); +#273582 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273583)); +#273583 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273584 = STYLED_ITEM('color',(#273585),#175917); +#273585 = PRESENTATION_STYLE_ASSIGNMENT((#273586)); +#273586 = SURFACE_STYLE_USAGE(.BOTH.,#273587); +#273587 = SURFACE_SIDE_STYLE('',(#273588,#273591)); +#273588 = SURFACE_STYLE_FILL_AREA(#273589); +#273589 = FILL_AREA_STYLE('',(#273590)); +#273590 = FILL_AREA_STYLE_COLOUR('',#270350); +#273591 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273592)); +#273592 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273593 = STYLED_ITEM('color',(#273594),#176129); +#273594 = PRESENTATION_STYLE_ASSIGNMENT((#273595)); +#273595 = SURFACE_STYLE_USAGE(.BOTH.,#273596); +#273596 = SURFACE_SIDE_STYLE('',(#273597,#273600)); +#273597 = SURFACE_STYLE_FILL_AREA(#273598); +#273598 = FILL_AREA_STYLE('',(#273599)); +#273599 = FILL_AREA_STYLE_COLOUR('',#270350); +#273600 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273601)); +#273601 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273602 = STYLED_ITEM('color',(#273603),#176173); +#273603 = PRESENTATION_STYLE_ASSIGNMENT((#273604)); +#273604 = SURFACE_STYLE_USAGE(.BOTH.,#273605); +#273605 = SURFACE_SIDE_STYLE('',(#273606,#273609)); +#273606 = SURFACE_STYLE_FILL_AREA(#273607); +#273607 = FILL_AREA_STYLE('',(#273608)); +#273608 = FILL_AREA_STYLE_COLOUR('',#270350); +#273609 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273610)); +#273610 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273611 = STYLED_ITEM('color',(#273612),#176250); +#273612 = PRESENTATION_STYLE_ASSIGNMENT((#273613)); +#273613 = SURFACE_STYLE_USAGE(.BOTH.,#273614); +#273614 = SURFACE_SIDE_STYLE('',(#273615,#273618)); +#273615 = SURFACE_STYLE_FILL_AREA(#273616); +#273616 = FILL_AREA_STYLE('',(#273617)); +#273617 = FILL_AREA_STYLE_COLOUR('',#270350); +#273618 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273619)); +#273619 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273620 = STYLED_ITEM('color',(#273621),#176327); +#273621 = PRESENTATION_STYLE_ASSIGNMENT((#273622)); +#273622 = SURFACE_STYLE_USAGE(.BOTH.,#273623); +#273623 = SURFACE_SIDE_STYLE('',(#273624,#273627)); +#273624 = SURFACE_STYLE_FILL_AREA(#273625); +#273625 = FILL_AREA_STYLE('',(#273626)); +#273626 = FILL_AREA_STYLE_COLOUR('',#270350); +#273627 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273628)); +#273628 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273629 = STYLED_ITEM('color',(#273630),#176371); +#273630 = PRESENTATION_STYLE_ASSIGNMENT((#273631)); +#273631 = SURFACE_STYLE_USAGE(.BOTH.,#273632); +#273632 = SURFACE_SIDE_STYLE('',(#273633,#273636)); +#273633 = SURFACE_STYLE_FILL_AREA(#273634); +#273634 = FILL_AREA_STYLE('',(#273635)); +#273635 = FILL_AREA_STYLE_COLOUR('',#270350); +#273636 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273637)); +#273637 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273638 = STYLED_ITEM('color',(#273639),#176423); +#273639 = PRESENTATION_STYLE_ASSIGNMENT((#273640)); +#273640 = SURFACE_STYLE_USAGE(.BOTH.,#273641); +#273641 = SURFACE_SIDE_STYLE('',(#273642,#273645)); +#273642 = SURFACE_STYLE_FILL_AREA(#273643); +#273643 = FILL_AREA_STYLE('',(#273644)); +#273644 = FILL_AREA_STYLE_COLOUR('',#270350); +#273645 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273646)); +#273646 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273647 = STYLED_ITEM('color',(#273648),#176574); +#273648 = PRESENTATION_STYLE_ASSIGNMENT((#273649)); +#273649 = SURFACE_STYLE_USAGE(.BOTH.,#273650); +#273650 = SURFACE_SIDE_STYLE('',(#273651,#273654)); +#273651 = SURFACE_STYLE_FILL_AREA(#273652); +#273652 = FILL_AREA_STYLE('',(#273653)); +#273653 = FILL_AREA_STYLE_COLOUR('',#270350); +#273654 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273655)); +#273655 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273656 = STYLED_ITEM('color',(#273657),#176626); +#273657 = PRESENTATION_STYLE_ASSIGNMENT((#273658)); +#273658 = SURFACE_STYLE_USAGE(.BOTH.,#273659); +#273659 = SURFACE_SIDE_STYLE('',(#273660,#273663)); +#273660 = SURFACE_STYLE_FILL_AREA(#273661); +#273661 = FILL_AREA_STYLE('',(#273662)); +#273662 = FILL_AREA_STYLE_COLOUR('',#270350); +#273663 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273664)); +#273664 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273665 = STYLED_ITEM('color',(#273666),#176678); +#273666 = PRESENTATION_STYLE_ASSIGNMENT((#273667)); +#273667 = SURFACE_STYLE_USAGE(.BOTH.,#273668); +#273668 = SURFACE_SIDE_STYLE('',(#273669,#273672)); +#273669 = SURFACE_STYLE_FILL_AREA(#273670); +#273670 = FILL_AREA_STYLE('',(#273671)); +#273671 = FILL_AREA_STYLE_COLOUR('',#270350); +#273672 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273673)); +#273673 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273674 = STYLED_ITEM('color',(#273675),#176820); +#273675 = PRESENTATION_STYLE_ASSIGNMENT((#273676)); +#273676 = SURFACE_STYLE_USAGE(.BOTH.,#273677); +#273677 = SURFACE_SIDE_STYLE('',(#273678,#273681)); +#273678 = SURFACE_STYLE_FILL_AREA(#273679); +#273679 = FILL_AREA_STYLE('',(#273680)); +#273680 = FILL_AREA_STYLE_COLOUR('',#270350); +#273681 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273682)); +#273682 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273683 = STYLED_ITEM('color',(#273684),#177013); +#273684 = PRESENTATION_STYLE_ASSIGNMENT((#273685)); +#273685 = SURFACE_STYLE_USAGE(.BOTH.,#273686); +#273686 = SURFACE_SIDE_STYLE('',(#273687,#273690)); +#273687 = SURFACE_STYLE_FILL_AREA(#273688); +#273688 = FILL_AREA_STYLE('',(#273689)); +#273689 = FILL_AREA_STYLE_COLOUR('',#270350); +#273690 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273691)); +#273691 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273692 = STYLED_ITEM('color',(#273693),#177207); +#273693 = PRESENTATION_STYLE_ASSIGNMENT((#273694)); +#273694 = SURFACE_STYLE_USAGE(.BOTH.,#273695); +#273695 = SURFACE_SIDE_STYLE('',(#273696,#273699)); +#273696 = SURFACE_STYLE_FILL_AREA(#273697); +#273697 = FILL_AREA_STYLE('',(#273698)); +#273698 = FILL_AREA_STYLE_COLOUR('',#270350); +#273699 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273700)); +#273700 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273701 = STYLED_ITEM('color',(#273702),#177294); +#273702 = PRESENTATION_STYLE_ASSIGNMENT((#273703)); +#273703 = SURFACE_STYLE_USAGE(.BOTH.,#273704); +#273704 = SURFACE_SIDE_STYLE('',(#273705,#273708)); +#273705 = SURFACE_STYLE_FILL_AREA(#273706); +#273706 = FILL_AREA_STYLE('',(#273707)); +#273707 = FILL_AREA_STYLE_COLOUR('',#270350); +#273708 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273709)); +#273709 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273710 = STYLED_ITEM('color',(#273711),#177362); +#273711 = PRESENTATION_STYLE_ASSIGNMENT((#273712)); +#273712 = SURFACE_STYLE_USAGE(.BOTH.,#273713); +#273713 = SURFACE_SIDE_STYLE('',(#273714,#273717)); +#273714 = SURFACE_STYLE_FILL_AREA(#273715); +#273715 = FILL_AREA_STYLE('',(#273716)); +#273716 = FILL_AREA_STYLE_COLOUR('',#270350); +#273717 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273718)); +#273718 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273719 = STYLED_ITEM('color',(#273720),#177406); +#273720 = PRESENTATION_STYLE_ASSIGNMENT((#273721)); +#273721 = SURFACE_STYLE_USAGE(.BOTH.,#273722); +#273722 = SURFACE_SIDE_STYLE('',(#273723,#273726)); +#273723 = SURFACE_STYLE_FILL_AREA(#273724); +#273724 = FILL_AREA_STYLE('',(#273725)); +#273725 = FILL_AREA_STYLE_COLOUR('',#270350); +#273726 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273727)); +#273727 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273728 = STYLED_ITEM('color',(#273729),#177626); +#273729 = PRESENTATION_STYLE_ASSIGNMENT((#273730)); +#273730 = SURFACE_STYLE_USAGE(.BOTH.,#273731); +#273731 = SURFACE_SIDE_STYLE('',(#273732,#273735)); +#273732 = SURFACE_STYLE_FILL_AREA(#273733); +#273733 = FILL_AREA_STYLE('',(#273734)); +#273734 = FILL_AREA_STYLE_COLOUR('',#270350); +#273735 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273736)); +#273736 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273737 = STYLED_ITEM('color',(#273738),#177720); +#273738 = PRESENTATION_STYLE_ASSIGNMENT((#273739)); +#273739 = SURFACE_STYLE_USAGE(.BOTH.,#273740); +#273740 = SURFACE_SIDE_STYLE('',(#273741,#273744)); +#273741 = SURFACE_STYLE_FILL_AREA(#273742); +#273742 = FILL_AREA_STYLE('',(#273743)); +#273743 = FILL_AREA_STYLE_COLOUR('',#270350); +#273744 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273745)); +#273745 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273746 = STYLED_ITEM('color',(#273747),#177932); +#273747 = PRESENTATION_STYLE_ASSIGNMENT((#273748)); +#273748 = SURFACE_STYLE_USAGE(.BOTH.,#273749); +#273749 = SURFACE_SIDE_STYLE('',(#273750,#273753)); +#273750 = SURFACE_STYLE_FILL_AREA(#273751); +#273751 = FILL_AREA_STYLE('',(#273752)); +#273752 = FILL_AREA_STYLE_COLOUR('',#270350); +#273753 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273754)); +#273754 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273755 = STYLED_ITEM('color',(#273756),#177976); +#273756 = PRESENTATION_STYLE_ASSIGNMENT((#273757)); +#273757 = SURFACE_STYLE_USAGE(.BOTH.,#273758); +#273758 = SURFACE_SIDE_STYLE('',(#273759,#273762)); +#273759 = SURFACE_STYLE_FILL_AREA(#273760); +#273760 = FILL_AREA_STYLE('',(#273761)); +#273761 = FILL_AREA_STYLE_COLOUR('',#270350); +#273762 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273763)); +#273763 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273764 = STYLED_ITEM('color',(#273765),#178154); +#273765 = PRESENTATION_STYLE_ASSIGNMENT((#273766)); +#273766 = SURFACE_STYLE_USAGE(.BOTH.,#273767); +#273767 = SURFACE_SIDE_STYLE('',(#273768,#273771)); +#273768 = SURFACE_STYLE_FILL_AREA(#273769); +#273769 = FILL_AREA_STYLE('',(#273770)); +#273770 = FILL_AREA_STYLE_COLOUR('',#270350); +#273771 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273772)); +#273772 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273773 = STYLED_ITEM('color',(#273774),#178256); +#273774 = PRESENTATION_STYLE_ASSIGNMENT((#273775)); +#273775 = SURFACE_STYLE_USAGE(.BOTH.,#273776); +#273776 = SURFACE_SIDE_STYLE('',(#273777,#273780)); +#273777 = SURFACE_STYLE_FILL_AREA(#273778); +#273778 = FILL_AREA_STYLE('',(#273779)); +#273779 = FILL_AREA_STYLE_COLOUR('',#270350); +#273780 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273781)); +#273781 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273782 = STYLED_ITEM('color',(#273783),#178449); +#273783 = PRESENTATION_STYLE_ASSIGNMENT((#273784)); +#273784 = SURFACE_STYLE_USAGE(.BOTH.,#273785); +#273785 = SURFACE_SIDE_STYLE('',(#273786,#273789)); +#273786 = SURFACE_STYLE_FILL_AREA(#273787); +#273787 = FILL_AREA_STYLE('',(#273788)); +#273788 = FILL_AREA_STYLE_COLOUR('',#270350); +#273789 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273790)); +#273790 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273791 = STYLED_ITEM('color',(#273792),#178643); +#273792 = PRESENTATION_STYLE_ASSIGNMENT((#273793)); +#273793 = SURFACE_STYLE_USAGE(.BOTH.,#273794); +#273794 = SURFACE_SIDE_STYLE('',(#273795,#273798)); +#273795 = SURFACE_STYLE_FILL_AREA(#273796); +#273796 = FILL_AREA_STYLE('',(#273797)); +#273797 = FILL_AREA_STYLE_COLOUR('',#270350); +#273798 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273799)); +#273799 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273800 = STYLED_ITEM('color',(#273801),#178846); +#273801 = PRESENTATION_STYLE_ASSIGNMENT((#273802)); +#273802 = SURFACE_STYLE_USAGE(.BOTH.,#273803); +#273803 = SURFACE_SIDE_STYLE('',(#273804,#273807)); +#273804 = SURFACE_STYLE_FILL_AREA(#273805); +#273805 = FILL_AREA_STYLE('',(#273806)); +#273806 = FILL_AREA_STYLE_COLOUR('',#270350); +#273807 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273808)); +#273808 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273809 = STYLED_ITEM('color',(#273810),#179024); +#273810 = PRESENTATION_STYLE_ASSIGNMENT((#273811)); +#273811 = SURFACE_STYLE_USAGE(.BOTH.,#273812); +#273812 = SURFACE_SIDE_STYLE('',(#273813,#273816)); +#273813 = SURFACE_STYLE_FILL_AREA(#273814); +#273814 = FILL_AREA_STYLE('',(#273815)); +#273815 = FILL_AREA_STYLE_COLOUR('',#270350); +#273816 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273817)); +#273817 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273818 = STYLED_ITEM('color',(#273819),#179068); +#273819 = PRESENTATION_STYLE_ASSIGNMENT((#273820)); +#273820 = SURFACE_STYLE_USAGE(.BOTH.,#273821); +#273821 = SURFACE_SIDE_STYLE('',(#273822,#273825)); +#273822 = SURFACE_STYLE_FILL_AREA(#273823); +#273823 = FILL_AREA_STYLE('',(#273824)); +#273824 = FILL_AREA_STYLE_COLOUR('',#270350); +#273825 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273826)); +#273826 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273827 = STYLED_ITEM('color',(#273828),#179112); +#273828 = PRESENTATION_STYLE_ASSIGNMENT((#273829)); +#273829 = SURFACE_STYLE_USAGE(.BOTH.,#273830); +#273830 = SURFACE_SIDE_STYLE('',(#273831,#273834)); +#273831 = SURFACE_STYLE_FILL_AREA(#273832); +#273832 = FILL_AREA_STYLE('',(#273833)); +#273833 = FILL_AREA_STYLE_COLOUR('',#270350); +#273834 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273835)); +#273835 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273836 = STYLED_ITEM('color',(#273837),#179156); +#273837 = PRESENTATION_STYLE_ASSIGNMENT((#273838)); +#273838 = SURFACE_STYLE_USAGE(.BOTH.,#273839); +#273839 = SURFACE_SIDE_STYLE('',(#273840,#273843)); +#273840 = SURFACE_STYLE_FILL_AREA(#273841); +#273841 = FILL_AREA_STYLE('',(#273842)); +#273842 = FILL_AREA_STYLE_COLOUR('',#270350); +#273843 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273844)); +#273844 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273845 = STYLED_ITEM('color',(#273846),#179384); +#273846 = PRESENTATION_STYLE_ASSIGNMENT((#273847)); +#273847 = SURFACE_STYLE_USAGE(.BOTH.,#273848); +#273848 = SURFACE_SIDE_STYLE('',(#273849,#273852)); +#273849 = SURFACE_STYLE_FILL_AREA(#273850); +#273850 = FILL_AREA_STYLE('',(#273851)); +#273851 = FILL_AREA_STYLE_COLOUR('',#270350); +#273852 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273853)); +#273853 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273854 = STYLED_ITEM('color',(#273855),#179714); +#273855 = PRESENTATION_STYLE_ASSIGNMENT((#273856)); +#273856 = SURFACE_STYLE_USAGE(.BOTH.,#273857); +#273857 = SURFACE_SIDE_STYLE('',(#273858,#273861)); +#273858 = SURFACE_STYLE_FILL_AREA(#273859); +#273859 = FILL_AREA_STYLE('',(#273860)); +#273860 = FILL_AREA_STYLE_COLOUR('',#270350); +#273861 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273862)); +#273862 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273863 = STYLED_ITEM('color',(#273864),#179881); +#273864 = PRESENTATION_STYLE_ASSIGNMENT((#273865)); +#273865 = SURFACE_STYLE_USAGE(.BOTH.,#273866); +#273866 = SURFACE_SIDE_STYLE('',(#273867,#273870)); +#273867 = SURFACE_STYLE_FILL_AREA(#273868); +#273868 = FILL_AREA_STYLE('',(#273869)); +#273869 = FILL_AREA_STYLE_COLOUR('',#270350); +#273870 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273871)); +#273871 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273872 = STYLED_ITEM('color',(#273873),#180052); +#273873 = PRESENTATION_STYLE_ASSIGNMENT((#273874)); +#273874 = SURFACE_STYLE_USAGE(.BOTH.,#273875); +#273875 = SURFACE_SIDE_STYLE('',(#273876,#273879)); +#273876 = SURFACE_STYLE_FILL_AREA(#273877); +#273877 = FILL_AREA_STYLE('',(#273878)); +#273878 = FILL_AREA_STYLE_COLOUR('',#270350); +#273879 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273880)); +#273880 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273881 = STYLED_ITEM('color',(#273882),#180255); +#273882 = PRESENTATION_STYLE_ASSIGNMENT((#273883)); +#273883 = SURFACE_STYLE_USAGE(.BOTH.,#273884); +#273884 = SURFACE_SIDE_STYLE('',(#273885,#273888)); +#273885 = SURFACE_STYLE_FILL_AREA(#273886); +#273886 = FILL_AREA_STYLE('',(#273887)); +#273887 = FILL_AREA_STYLE_COLOUR('',#270350); +#273888 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273889)); +#273889 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273890 = STYLED_ITEM('color',(#273891),#180398); +#273891 = PRESENTATION_STYLE_ASSIGNMENT((#273892)); +#273892 = SURFACE_STYLE_USAGE(.BOTH.,#273893); +#273893 = SURFACE_SIDE_STYLE('',(#273894,#273897)); +#273894 = SURFACE_STYLE_FILL_AREA(#273895); +#273895 = FILL_AREA_STYLE('',(#273896)); +#273896 = FILL_AREA_STYLE_COLOUR('',#270350); +#273897 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273898)); +#273898 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273899 = STYLED_ITEM('color',(#273900),#180626); +#273900 = PRESENTATION_STYLE_ASSIGNMENT((#273901)); +#273901 = SURFACE_STYLE_USAGE(.BOTH.,#273902); +#273902 = SURFACE_SIDE_STYLE('',(#273903,#273906)); +#273903 = SURFACE_STYLE_FILL_AREA(#273904); +#273904 = FILL_AREA_STYLE('',(#273905)); +#273905 = FILL_AREA_STYLE_COLOUR('',#270350); +#273906 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273907)); +#273907 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273908 = STYLED_ITEM('color',(#273909),#180738); +#273909 = PRESENTATION_STYLE_ASSIGNMENT((#273910)); +#273910 = SURFACE_STYLE_USAGE(.BOTH.,#273911); +#273911 = SURFACE_SIDE_STYLE('',(#273912,#273915)); +#273912 = SURFACE_STYLE_FILL_AREA(#273913); +#273913 = FILL_AREA_STYLE('',(#273914)); +#273914 = FILL_AREA_STYLE_COLOUR('',#270350); +#273915 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273916)); +#273916 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273917 = STYLED_ITEM('color',(#273918),#180850); +#273918 = PRESENTATION_STYLE_ASSIGNMENT((#273919)); +#273919 = SURFACE_STYLE_USAGE(.BOTH.,#273920); +#273920 = SURFACE_SIDE_STYLE('',(#273921,#273924)); +#273921 = SURFACE_STYLE_FILL_AREA(#273922); +#273922 = FILL_AREA_STYLE('',(#273923)); +#273923 = FILL_AREA_STYLE_COLOUR('',#270350); +#273924 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273925)); +#273925 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273926 = STYLED_ITEM('color',(#273927),#180894); +#273927 = PRESENTATION_STYLE_ASSIGNMENT((#273928)); +#273928 = SURFACE_STYLE_USAGE(.BOTH.,#273929); +#273929 = SURFACE_SIDE_STYLE('',(#273930,#273933)); +#273930 = SURFACE_STYLE_FILL_AREA(#273931); +#273931 = FILL_AREA_STYLE('',(#273932)); +#273932 = FILL_AREA_STYLE_COLOUR('',#270350); +#273933 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273934)); +#273934 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273935 = STYLED_ITEM('color',(#273936),#180938); +#273936 = PRESENTATION_STYLE_ASSIGNMENT((#273937)); +#273937 = SURFACE_STYLE_USAGE(.BOTH.,#273938); +#273938 = SURFACE_SIDE_STYLE('',(#273939,#273942)); +#273939 = SURFACE_STYLE_FILL_AREA(#273940); +#273940 = FILL_AREA_STYLE('',(#273941)); +#273941 = FILL_AREA_STYLE_COLOUR('',#270350); +#273942 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273943)); +#273943 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273944 = STYLED_ITEM('color',(#273945),#181224); +#273945 = PRESENTATION_STYLE_ASSIGNMENT((#273946)); +#273946 = SURFACE_STYLE_USAGE(.BOTH.,#273947); +#273947 = SURFACE_SIDE_STYLE('',(#273948,#273951)); +#273948 = SURFACE_STYLE_FILL_AREA(#273949); +#273949 = FILL_AREA_STYLE('',(#273950)); +#273950 = FILL_AREA_STYLE_COLOUR('',#270350); +#273951 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273952)); +#273952 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273953 = STYLED_ITEM('color',(#273954),#181318); +#273954 = PRESENTATION_STYLE_ASSIGNMENT((#273955)); +#273955 = SURFACE_STYLE_USAGE(.BOTH.,#273956); +#273956 = SURFACE_SIDE_STYLE('',(#273957,#273960)); +#273957 = SURFACE_STYLE_FILL_AREA(#273958); +#273958 = FILL_AREA_STYLE('',(#273959)); +#273959 = FILL_AREA_STYLE_COLOUR('',#270350); +#273960 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273961)); +#273961 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273962 = STYLED_ITEM('color',(#273963),#181456); +#273963 = PRESENTATION_STYLE_ASSIGNMENT((#273964)); +#273964 = SURFACE_STYLE_USAGE(.BOTH.,#273965); +#273965 = SURFACE_SIDE_STYLE('',(#273966,#273969)); +#273966 = SURFACE_STYLE_FILL_AREA(#273967); +#273967 = FILL_AREA_STYLE('',(#273968)); +#273968 = FILL_AREA_STYLE_COLOUR('',#270350); +#273969 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273970)); +#273970 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273971 = STYLED_ITEM('color',(#273972),#181650); +#273972 = PRESENTATION_STYLE_ASSIGNMENT((#273973)); +#273973 = SURFACE_STYLE_USAGE(.BOTH.,#273974); +#273974 = SURFACE_SIDE_STYLE('',(#273975,#273978)); +#273975 = SURFACE_STYLE_FILL_AREA(#273976); +#273976 = FILL_AREA_STYLE('',(#273977)); +#273977 = FILL_AREA_STYLE_COLOUR('',#270350); +#273978 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273979)); +#273979 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273980 = STYLED_ITEM('color',(#273981),#181801); +#273981 = PRESENTATION_STYLE_ASSIGNMENT((#273982)); +#273982 = SURFACE_STYLE_USAGE(.BOTH.,#273983); +#273983 = SURFACE_SIDE_STYLE('',(#273984,#273987)); +#273984 = SURFACE_STYLE_FILL_AREA(#273985); +#273985 = FILL_AREA_STYLE('',(#273986)); +#273986 = FILL_AREA_STYLE_COLOUR('',#270350); +#273987 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273988)); +#273988 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273989 = STYLED_ITEM('color',(#273990),#181993); +#273990 = PRESENTATION_STYLE_ASSIGNMENT((#273991)); +#273991 = SURFACE_STYLE_USAGE(.BOTH.,#273992); +#273992 = SURFACE_SIDE_STYLE('',(#273993,#273996)); +#273993 = SURFACE_STYLE_FILL_AREA(#273994); +#273994 = FILL_AREA_STYLE('',(#273995)); +#273995 = FILL_AREA_STYLE_COLOUR('',#270350); +#273996 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#273997)); +#273997 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273998 = STYLED_ITEM('color',(#273999),#182119); +#273999 = PRESENTATION_STYLE_ASSIGNMENT((#274000)); +#274000 = SURFACE_STYLE_USAGE(.BOTH.,#274001); +#274001 = SURFACE_SIDE_STYLE('',(#274002,#274005)); +#274002 = SURFACE_STYLE_FILL_AREA(#274003); +#274003 = FILL_AREA_STYLE('',(#274004)); +#274004 = FILL_AREA_STYLE_COLOUR('',#270350); +#274005 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274006)); +#274006 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274007 = STYLED_ITEM('color',(#274008),#182377); +#274008 = PRESENTATION_STYLE_ASSIGNMENT((#274009)); +#274009 = SURFACE_STYLE_USAGE(.BOTH.,#274010); +#274010 = SURFACE_SIDE_STYLE('',(#274011,#274014)); +#274011 = SURFACE_STYLE_FILL_AREA(#274012); +#274012 = FILL_AREA_STYLE('',(#274013)); +#274013 = FILL_AREA_STYLE_COLOUR('',#270350); +#274014 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274015)); +#274015 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274016 = STYLED_ITEM('color',(#274017),#182720); +#274017 = PRESENTATION_STYLE_ASSIGNMENT((#274018)); +#274018 = SURFACE_STYLE_USAGE(.BOTH.,#274019); +#274019 = SURFACE_SIDE_STYLE('',(#274020,#274023)); +#274020 = SURFACE_STYLE_FILL_AREA(#274021); +#274021 = FILL_AREA_STYLE('',(#274022)); +#274022 = FILL_AREA_STYLE_COLOUR('',#270350); +#274023 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274024)); +#274024 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274025 = STYLED_ITEM('color',(#274026),#182912); +#274026 = PRESENTATION_STYLE_ASSIGNMENT((#274027)); +#274027 = SURFACE_STYLE_USAGE(.BOTH.,#274028); +#274028 = SURFACE_SIDE_STYLE('',(#274029,#274032)); +#274029 = SURFACE_STYLE_FILL_AREA(#274030); +#274030 = FILL_AREA_STYLE('',(#274031)); +#274031 = FILL_AREA_STYLE_COLOUR('',#270350); +#274032 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274033)); +#274033 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274034 = STYLED_ITEM('color',(#274035),#183038); +#274035 = PRESENTATION_STYLE_ASSIGNMENT((#274036)); +#274036 = SURFACE_STYLE_USAGE(.BOTH.,#274037); +#274037 = SURFACE_SIDE_STYLE('',(#274038,#274041)); +#274038 = SURFACE_STYLE_FILL_AREA(#274039); +#274039 = FILL_AREA_STYLE('',(#274040)); +#274040 = FILL_AREA_STYLE_COLOUR('',#270350); +#274041 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274042)); +#274042 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274043 = STYLED_ITEM('color',(#274044),#183296); +#274044 = PRESENTATION_STYLE_ASSIGNMENT((#274045)); +#274045 = SURFACE_STYLE_USAGE(.BOTH.,#274046); +#274046 = SURFACE_SIDE_STYLE('',(#274047,#274050)); +#274047 = SURFACE_STYLE_FILL_AREA(#274048); +#274048 = FILL_AREA_STYLE('',(#274049)); +#274049 = FILL_AREA_STYLE_COLOUR('',#270350); +#274050 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274051)); +#274051 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274052 = STYLED_ITEM('color',(#274053),#183364); +#274053 = PRESENTATION_STYLE_ASSIGNMENT((#274054)); +#274054 = SURFACE_STYLE_USAGE(.BOTH.,#274055); +#274055 = SURFACE_SIDE_STYLE('',(#274056,#274059)); +#274056 = SURFACE_STYLE_FILL_AREA(#274057); +#274057 = FILL_AREA_STYLE('',(#274058)); +#274058 = FILL_AREA_STYLE_COLOUR('',#270350); +#274059 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274060)); +#274060 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274061 = STYLED_ITEM('color',(#274062),#183458); +#274062 = PRESENTATION_STYLE_ASSIGNMENT((#274063)); +#274063 = SURFACE_STYLE_USAGE(.BOTH.,#274064); +#274064 = SURFACE_SIDE_STYLE('',(#274065,#274068)); +#274065 = SURFACE_STYLE_FILL_AREA(#274066); +#274066 = FILL_AREA_STYLE('',(#274067)); +#274067 = FILL_AREA_STYLE_COLOUR('',#270350); +#274068 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274069)); +#274069 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274070 = STYLED_ITEM('color',(#274071),#183527); +#274071 = PRESENTATION_STYLE_ASSIGNMENT((#274072)); +#274072 = SURFACE_STYLE_USAGE(.BOTH.,#274073); +#274073 = SURFACE_SIDE_STYLE('',(#274074,#274077)); +#274074 = SURFACE_STYLE_FILL_AREA(#274075); +#274075 = FILL_AREA_STYLE('',(#274076)); +#274076 = FILL_AREA_STYLE_COLOUR('',#270350); +#274077 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274078)); +#274078 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274079 = STYLED_ITEM('color',(#274080),#183596); +#274080 = PRESENTATION_STYLE_ASSIGNMENT((#274081)); +#274081 = SURFACE_STYLE_USAGE(.BOTH.,#274082); +#274082 = SURFACE_SIDE_STYLE('',(#274083,#274086)); +#274083 = SURFACE_STYLE_FILL_AREA(#274084); +#274084 = FILL_AREA_STYLE('',(#274085)); +#274085 = FILL_AREA_STYLE_COLOUR('',#270350); +#274086 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274087)); +#274087 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274088 = STYLED_ITEM('color',(#274089),#183748); +#274089 = PRESENTATION_STYLE_ASSIGNMENT((#274090)); +#274090 = SURFACE_STYLE_USAGE(.BOTH.,#274091); +#274091 = SURFACE_SIDE_STYLE('',(#274092,#274095)); +#274092 = SURFACE_STYLE_FILL_AREA(#274093); +#274093 = FILL_AREA_STYLE('',(#274094)); +#274094 = FILL_AREA_STYLE_COLOUR('',#270350); +#274095 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274096)); +#274096 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274097 = STYLED_ITEM('color',(#274098),#183792); +#274098 = PRESENTATION_STYLE_ASSIGNMENT((#274099)); +#274099 = SURFACE_STYLE_USAGE(.BOTH.,#274100); +#274100 = SURFACE_SIDE_STYLE('',(#274101,#274104)); +#274101 = SURFACE_STYLE_FILL_AREA(#274102); +#274102 = FILL_AREA_STYLE('',(#274103)); +#274103 = FILL_AREA_STYLE_COLOUR('',#270350); +#274104 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274105)); +#274105 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274106 = STYLED_ITEM('color',(#274107),#183879); +#274107 = PRESENTATION_STYLE_ASSIGNMENT((#274108)); +#274108 = SURFACE_STYLE_USAGE(.BOTH.,#274109); +#274109 = SURFACE_SIDE_STYLE('',(#274110,#274113)); +#274110 = SURFACE_STYLE_FILL_AREA(#274111); +#274111 = FILL_AREA_STYLE('',(#274112)); +#274112 = FILL_AREA_STYLE_COLOUR('',#270350); +#274113 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274114)); +#274114 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274115 = STYLED_ITEM('color',(#274116),#184182); +#274116 = PRESENTATION_STYLE_ASSIGNMENT((#274117)); +#274117 = SURFACE_STYLE_USAGE(.BOTH.,#274118); +#274118 = SURFACE_SIDE_STYLE('',(#274119,#274122)); +#274119 = SURFACE_STYLE_FILL_AREA(#274120); +#274120 = FILL_AREA_STYLE('',(#274121)); +#274121 = FILL_AREA_STYLE_COLOUR('',#270350); +#274122 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274123)); +#274123 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274124 = STYLED_ITEM('color',(#274125),#184384); +#274125 = PRESENTATION_STYLE_ASSIGNMENT((#274126)); +#274126 = SURFACE_STYLE_USAGE(.BOTH.,#274127); +#274127 = SURFACE_SIDE_STYLE('',(#274128,#274131)); +#274128 = SURFACE_STYLE_FILL_AREA(#274129); +#274129 = FILL_AREA_STYLE('',(#274130)); +#274130 = FILL_AREA_STYLE_COLOUR('',#270350); +#274131 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274132)); +#274132 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274133 = STYLED_ITEM('color',(#274134),#184604); +#274134 = PRESENTATION_STYLE_ASSIGNMENT((#274135)); +#274135 = SURFACE_STYLE_USAGE(.BOTH.,#274136); +#274136 = SURFACE_SIDE_STYLE('',(#274137,#274140)); +#274137 = SURFACE_STYLE_FILL_AREA(#274138); +#274138 = FILL_AREA_STYLE('',(#274139)); +#274139 = FILL_AREA_STYLE_COLOUR('',#270350); +#274140 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274141)); +#274141 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274142 = STYLED_ITEM('color',(#274143),#184876); +#274143 = PRESENTATION_STYLE_ASSIGNMENT((#274144)); +#274144 = SURFACE_STYLE_USAGE(.BOTH.,#274145); +#274145 = SURFACE_SIDE_STYLE('',(#274146,#274149)); +#274146 = SURFACE_STYLE_FILL_AREA(#274147); +#274147 = FILL_AREA_STYLE('',(#274148)); +#274148 = FILL_AREA_STYLE_COLOUR('',#270350); +#274149 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274150)); +#274150 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274151 = STYLED_ITEM('color',(#274152),#185004); +#274152 = PRESENTATION_STYLE_ASSIGNMENT((#274153)); +#274153 = SURFACE_STYLE_USAGE(.BOTH.,#274154); +#274154 = SURFACE_SIDE_STYLE('',(#274155,#274158)); +#274155 = SURFACE_STYLE_FILL_AREA(#274156); +#274156 = FILL_AREA_STYLE('',(#274157)); +#274157 = FILL_AREA_STYLE_COLOUR('',#270350); +#274158 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274159)); +#274159 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274160 = STYLED_ITEM('color',(#274161),#185225); +#274161 = PRESENTATION_STYLE_ASSIGNMENT((#274162)); +#274162 = SURFACE_STYLE_USAGE(.BOTH.,#274163); +#274163 = SURFACE_SIDE_STYLE('',(#274164,#274167)); +#274164 = SURFACE_STYLE_FILL_AREA(#274165); +#274165 = FILL_AREA_STYLE('',(#274166)); +#274166 = FILL_AREA_STYLE_COLOUR('',#270350); +#274167 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274168)); +#274168 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274169 = STYLED_ITEM('color',(#274170),#185269); +#274170 = PRESENTATION_STYLE_ASSIGNMENT((#274171)); +#274171 = SURFACE_STYLE_USAGE(.BOTH.,#274172); +#274172 = SURFACE_SIDE_STYLE('',(#274173,#274176)); +#274173 = SURFACE_STYLE_FILL_AREA(#274174); +#274174 = FILL_AREA_STYLE('',(#274175)); +#274175 = FILL_AREA_STYLE_COLOUR('',#270350); +#274176 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274177)); +#274177 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274178 = STYLED_ITEM('color',(#274179),#185476); +#274179 = PRESENTATION_STYLE_ASSIGNMENT((#274180)); +#274180 = SURFACE_STYLE_USAGE(.BOTH.,#274181); +#274181 = SURFACE_SIDE_STYLE('',(#274182,#274185)); +#274182 = SURFACE_STYLE_FILL_AREA(#274183); +#274183 = FILL_AREA_STYLE('',(#274184)); +#274184 = FILL_AREA_STYLE_COLOUR('',#270350); +#274185 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274186)); +#274186 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274187 = STYLED_ITEM('color',(#274188),#185757); +#274188 = PRESENTATION_STYLE_ASSIGNMENT((#274189)); +#274189 = SURFACE_STYLE_USAGE(.BOTH.,#274190); +#274190 = SURFACE_SIDE_STYLE('',(#274191,#274194)); +#274191 = SURFACE_STYLE_FILL_AREA(#274192); +#274192 = FILL_AREA_STYLE('',(#274193)); +#274193 = FILL_AREA_STYLE_COLOUR('',#270350); +#274194 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274195)); +#274195 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274196 = STYLED_ITEM('color',(#274197),#185900); +#274197 = PRESENTATION_STYLE_ASSIGNMENT((#274198)); +#274198 = SURFACE_STYLE_USAGE(.BOTH.,#274199); +#274199 = SURFACE_SIDE_STYLE('',(#274200,#274203)); +#274200 = SURFACE_STYLE_FILL_AREA(#274201); +#274201 = FILL_AREA_STYLE('',(#274202)); +#274202 = FILL_AREA_STYLE_COLOUR('',#270350); +#274203 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274204)); +#274204 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274205 = STYLED_ITEM('color',(#274206),#186071); +#274206 = PRESENTATION_STYLE_ASSIGNMENT((#274207)); +#274207 = SURFACE_STYLE_USAGE(.BOTH.,#274208); +#274208 = SURFACE_SIDE_STYLE('',(#274209,#274212)); +#274209 = SURFACE_STYLE_FILL_AREA(#274210); +#274210 = FILL_AREA_STYLE('',(#274211)); +#274211 = FILL_AREA_STYLE_COLOUR('',#270350); +#274212 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274213)); +#274213 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274214 = STYLED_ITEM('color',(#274215),#186274); +#274215 = PRESENTATION_STYLE_ASSIGNMENT((#274216)); +#274216 = SURFACE_STYLE_USAGE(.BOTH.,#274217); +#274217 = SURFACE_SIDE_STYLE('',(#274218,#274221)); +#274218 = SURFACE_STYLE_FILL_AREA(#274219); +#274219 = FILL_AREA_STYLE('',(#274220)); +#274220 = FILL_AREA_STYLE_COLOUR('',#270350); +#274221 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274222)); +#274222 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274223 = STYLED_ITEM('color',(#274224),#186468); +#274224 = PRESENTATION_STYLE_ASSIGNMENT((#274225)); +#274225 = SURFACE_STYLE_USAGE(.BOTH.,#274226); +#274226 = SURFACE_SIDE_STYLE('',(#274227,#274230)); +#274227 = SURFACE_STYLE_FILL_AREA(#274228); +#274228 = FILL_AREA_STYLE('',(#274229)); +#274229 = FILL_AREA_STYLE_COLOUR('',#270350); +#274230 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274231)); +#274231 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274232 = STYLED_ITEM('color',(#274233),#186570); +#274233 = PRESENTATION_STYLE_ASSIGNMENT((#274234)); +#274234 = SURFACE_STYLE_USAGE(.BOTH.,#274235); +#274235 = SURFACE_SIDE_STYLE('',(#274236,#274239)); +#274236 = SURFACE_STYLE_FILL_AREA(#274237); +#274237 = FILL_AREA_STYLE('',(#274238)); +#274238 = FILL_AREA_STYLE_COLOUR('',#270350); +#274239 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274240)); +#274240 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274241 = STYLED_ITEM('color',(#274242),#186614); +#274242 = PRESENTATION_STYLE_ASSIGNMENT((#274243)); +#274243 = SURFACE_STYLE_USAGE(.BOTH.,#274244); +#274244 = SURFACE_SIDE_STYLE('',(#274245,#274248)); +#274245 = SURFACE_STYLE_FILL_AREA(#274246); +#274246 = FILL_AREA_STYLE('',(#274247)); +#274247 = FILL_AREA_STYLE_COLOUR('',#270350); +#274248 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274249)); +#274249 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274250 = STYLED_ITEM('color',(#274251),#186867); +#274251 = PRESENTATION_STYLE_ASSIGNMENT((#274252)); +#274252 = SURFACE_STYLE_USAGE(.BOTH.,#274253); +#274253 = SURFACE_SIDE_STYLE('',(#274254,#274257)); +#274254 = SURFACE_STYLE_FILL_AREA(#274255); +#274255 = FILL_AREA_STYLE('',(#274256)); +#274256 = FILL_AREA_STYLE_COLOUR('',#270350); +#274257 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274258)); +#274258 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274259 = STYLED_ITEM('color',(#274260),#187139); +#274260 = PRESENTATION_STYLE_ASSIGNMENT((#274261)); +#274261 = SURFACE_STYLE_USAGE(.BOTH.,#274262); +#274262 = SURFACE_SIDE_STYLE('',(#274263,#274266)); +#274263 = SURFACE_STYLE_FILL_AREA(#274264); +#274264 = FILL_AREA_STYLE('',(#274265)); +#274265 = FILL_AREA_STYLE_COLOUR('',#270350); +#274266 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274267)); +#274267 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274268 = STYLED_ITEM('color',(#274269),#187259); +#274269 = PRESENTATION_STYLE_ASSIGNMENT((#274270)); +#274270 = SURFACE_STYLE_USAGE(.BOTH.,#274271); +#274271 = SURFACE_SIDE_STYLE('',(#274272,#274275)); +#274272 = SURFACE_STYLE_FILL_AREA(#274273); +#274273 = FILL_AREA_STYLE('',(#274274)); +#274274 = FILL_AREA_STYLE_COLOUR('',#270350); +#274275 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274276)); +#274276 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274277 = STYLED_ITEM('color',(#274278),#187426); +#274278 = PRESENTATION_STYLE_ASSIGNMENT((#274279)); +#274279 = SURFACE_STYLE_USAGE(.BOTH.,#274280); +#274280 = SURFACE_SIDE_STYLE('',(#274281,#274284)); +#274281 = SURFACE_STYLE_FILL_AREA(#274282); +#274282 = FILL_AREA_STYLE('',(#274283)); +#274283 = FILL_AREA_STYLE_COLOUR('',#270350); +#274284 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274285)); +#274285 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274286 = STYLED_ITEM('color',(#274287),#187520); +#274287 = PRESENTATION_STYLE_ASSIGNMENT((#274288)); +#274288 = SURFACE_STYLE_USAGE(.BOTH.,#274289); +#274289 = SURFACE_SIDE_STYLE('',(#274290,#274293)); +#274290 = SURFACE_STYLE_FILL_AREA(#274291); +#274291 = FILL_AREA_STYLE('',(#274292)); +#274292 = FILL_AREA_STYLE_COLOUR('',#270350); +#274293 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274294)); +#274294 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274295 = STYLED_ITEM('color',(#274296),#187658); +#274296 = PRESENTATION_STYLE_ASSIGNMENT((#274297)); +#274297 = SURFACE_STYLE_USAGE(.BOTH.,#274298); +#274298 = SURFACE_SIDE_STYLE('',(#274299,#274302)); +#274299 = SURFACE_STYLE_FILL_AREA(#274300); +#274300 = FILL_AREA_STYLE('',(#274301)); +#274301 = FILL_AREA_STYLE_COLOUR('',#270350); +#274302 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274303)); +#274303 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274304 = STYLED_ITEM('color',(#274305),#187776); +#274305 = PRESENTATION_STYLE_ASSIGNMENT((#274306)); +#274306 = SURFACE_STYLE_USAGE(.BOTH.,#274307); +#274307 = SURFACE_SIDE_STYLE('',(#274308,#274311)); +#274308 = SURFACE_STYLE_FILL_AREA(#274309); +#274309 = FILL_AREA_STYLE('',(#274310)); +#274310 = FILL_AREA_STYLE_COLOUR('',#270350); +#274311 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274312)); +#274312 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274313 = STYLED_ITEM('color',(#274314),#187820); +#274314 = PRESENTATION_STYLE_ASSIGNMENT((#274315)); +#274315 = SURFACE_STYLE_USAGE(.BOTH.,#274316); +#274316 = SURFACE_SIDE_STYLE('',(#274317,#274320)); +#274317 = SURFACE_STYLE_FILL_AREA(#274318); +#274318 = FILL_AREA_STYLE('',(#274319)); +#274319 = FILL_AREA_STYLE_COLOUR('',#270350); +#274320 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274321)); +#274321 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274322 = STYLED_ITEM('color',(#274323),#188143); +#274323 = PRESENTATION_STYLE_ASSIGNMENT((#274324)); +#274324 = SURFACE_STYLE_USAGE(.BOTH.,#274325); +#274325 = SURFACE_SIDE_STYLE('',(#274326,#274329)); +#274326 = SURFACE_STYLE_FILL_AREA(#274327); +#274327 = FILL_AREA_STYLE('',(#274328)); +#274328 = FILL_AREA_STYLE_COLOUR('',#270350); +#274329 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274330)); +#274330 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274331 = STYLED_ITEM('color',(#274332),#188173); +#274332 = PRESENTATION_STYLE_ASSIGNMENT((#274333)); +#274333 = SURFACE_STYLE_USAGE(.BOTH.,#274334); +#274334 = SURFACE_SIDE_STYLE('',(#274335,#274338)); +#274335 = SURFACE_STYLE_FILL_AREA(#274336); +#274336 = FILL_AREA_STYLE('',(#274337)); +#274337 = FILL_AREA_STYLE_COLOUR('',#270350); +#274338 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274339)); +#274339 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274340 = STYLED_ITEM('color',(#274341),#188266); +#274341 = PRESENTATION_STYLE_ASSIGNMENT((#274342)); +#274342 = SURFACE_STYLE_USAGE(.BOTH.,#274343); +#274343 = SURFACE_SIDE_STYLE('',(#274344,#274347)); +#274344 = SURFACE_STYLE_FILL_AREA(#274345); +#274345 = FILL_AREA_STYLE('',(#274346)); +#274346 = FILL_AREA_STYLE_COLOUR('',#270350); +#274347 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274348)); +#274348 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274349 = STYLED_ITEM('color',(#274350),#188310); +#274350 = PRESENTATION_STYLE_ASSIGNMENT((#274351)); +#274351 = SURFACE_STYLE_USAGE(.BOTH.,#274352); +#274352 = SURFACE_SIDE_STYLE('',(#274353,#274356)); +#274353 = SURFACE_STYLE_FILL_AREA(#274354); +#274354 = FILL_AREA_STYLE('',(#274355)); +#274355 = FILL_AREA_STYLE_COLOUR('',#270350); +#274356 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274357)); +#274357 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274358 = STYLED_ITEM('color',(#274359),#188563); +#274359 = PRESENTATION_STYLE_ASSIGNMENT((#274360)); +#274360 = SURFACE_STYLE_USAGE(.BOTH.,#274361); +#274361 = SURFACE_SIDE_STYLE('',(#274362,#274365)); +#274362 = SURFACE_STYLE_FILL_AREA(#274363); +#274363 = FILL_AREA_STYLE('',(#274364)); +#274364 = FILL_AREA_STYLE_COLOUR('',#270350); +#274365 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274366)); +#274366 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274367 = STYLED_ITEM('color',(#274368),#188835); +#274368 = PRESENTATION_STYLE_ASSIGNMENT((#274369)); +#274369 = SURFACE_STYLE_USAGE(.BOTH.,#274370); +#274370 = SURFACE_SIDE_STYLE('',(#274371,#274374)); +#274371 = SURFACE_STYLE_FILL_AREA(#274372); +#274372 = FILL_AREA_STYLE('',(#274373)); +#274373 = FILL_AREA_STYLE_COLOUR('',#270350); +#274374 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274375)); +#274375 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274376 = STYLED_ITEM('color',(#274377),#188955); +#274377 = PRESENTATION_STYLE_ASSIGNMENT((#274378)); +#274378 = SURFACE_STYLE_USAGE(.BOTH.,#274379); +#274379 = SURFACE_SIDE_STYLE('',(#274380,#274383)); +#274380 = SURFACE_STYLE_FILL_AREA(#274381); +#274381 = FILL_AREA_STYLE('',(#274382)); +#274382 = FILL_AREA_STYLE_COLOUR('',#270350); +#274383 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274384)); +#274384 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274385 = STYLED_ITEM('color',(#274386),#189073); +#274386 = PRESENTATION_STYLE_ASSIGNMENT((#274387)); +#274387 = SURFACE_STYLE_USAGE(.BOTH.,#274388); +#274388 = SURFACE_SIDE_STYLE('',(#274389,#274392)); +#274389 = SURFACE_STYLE_FILL_AREA(#274390); +#274390 = FILL_AREA_STYLE('',(#274391)); +#274391 = FILL_AREA_STYLE_COLOUR('',#270350); +#274392 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274393)); +#274393 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274394 = STYLED_ITEM('color',(#274395),#189200); +#274395 = PRESENTATION_STYLE_ASSIGNMENT((#274396)); +#274396 = SURFACE_STYLE_USAGE(.BOTH.,#274397); +#274397 = SURFACE_SIDE_STYLE('',(#274398,#274401)); +#274398 = SURFACE_STYLE_FILL_AREA(#274399); +#274399 = FILL_AREA_STYLE('',(#274400)); +#274400 = FILL_AREA_STYLE_COLOUR('',#270350); +#274401 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274402)); +#274402 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274403 = STYLED_ITEM('color',(#274404),#189269); +#274404 = PRESENTATION_STYLE_ASSIGNMENT((#274405)); +#274405 = SURFACE_STYLE_USAGE(.BOTH.,#274406); +#274406 = SURFACE_SIDE_STYLE('',(#274407,#274410)); +#274407 = SURFACE_STYLE_FILL_AREA(#274408); +#274408 = FILL_AREA_STYLE('',(#274409)); +#274409 = FILL_AREA_STYLE_COLOUR('',#270350); +#274410 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274411)); +#274411 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274412 = STYLED_ITEM('color',(#274413),#189463); +#274413 = PRESENTATION_STYLE_ASSIGNMENT((#274414)); +#274414 = SURFACE_STYLE_USAGE(.BOTH.,#274415); +#274415 = SURFACE_SIDE_STYLE('',(#274416,#274419)); +#274416 = SURFACE_STYLE_FILL_AREA(#274417); +#274417 = FILL_AREA_STYLE('',(#274418)); +#274418 = FILL_AREA_STYLE_COLOUR('',#270350); +#274419 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274420)); +#274420 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274421 = STYLED_ITEM('color',(#274422),#189565); +#274422 = PRESENTATION_STYLE_ASSIGNMENT((#274423)); +#274423 = SURFACE_STYLE_USAGE(.BOTH.,#274424); +#274424 = SURFACE_SIDE_STYLE('',(#274425,#274428)); +#274425 = SURFACE_STYLE_FILL_AREA(#274426); +#274426 = FILL_AREA_STYLE('',(#274427)); +#274427 = FILL_AREA_STYLE_COLOUR('',#270350); +#274428 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274429)); +#274429 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274430 = STYLED_ITEM('color',(#274431),#189707); +#274431 = PRESENTATION_STYLE_ASSIGNMENT((#274432)); +#274432 = SURFACE_STYLE_USAGE(.BOTH.,#274433); +#274433 = SURFACE_SIDE_STYLE('',(#274434,#274437)); +#274434 = SURFACE_STYLE_FILL_AREA(#274435); +#274435 = FILL_AREA_STYLE('',(#274436)); +#274436 = FILL_AREA_STYLE_COLOUR('',#270350); +#274437 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274438)); +#274438 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274439 = STYLED_ITEM('color',(#274440),#189878); +#274440 = PRESENTATION_STYLE_ASSIGNMENT((#274441)); +#274441 = SURFACE_STYLE_USAGE(.BOTH.,#274442); +#274442 = SURFACE_SIDE_STYLE('',(#274443,#274446)); +#274443 = SURFACE_STYLE_FILL_AREA(#274444); +#274444 = FILL_AREA_STYLE('',(#274445)); +#274445 = FILL_AREA_STYLE_COLOUR('',#270350); +#274446 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274447)); +#274447 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274448 = STYLED_ITEM('color',(#274449),#190150); +#274449 = PRESENTATION_STYLE_ASSIGNMENT((#274450)); +#274450 = SURFACE_STYLE_USAGE(.BOTH.,#274451); +#274451 = SURFACE_SIDE_STYLE('',(#274452,#274455)); +#274452 = SURFACE_STYLE_FILL_AREA(#274453); +#274453 = FILL_AREA_STYLE('',(#274454)); +#274454 = FILL_AREA_STYLE_COLOUR('',#270350); +#274455 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274456)); +#274456 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274457 = STYLED_ITEM('color',(#274458),#190399); +#274458 = PRESENTATION_STYLE_ASSIGNMENT((#274459)); +#274459 = SURFACE_STYLE_USAGE(.BOTH.,#274460); +#274460 = SURFACE_SIDE_STYLE('',(#274461,#274464)); +#274461 = SURFACE_STYLE_FILL_AREA(#274462); +#274462 = FILL_AREA_STYLE('',(#274463)); +#274463 = FILL_AREA_STYLE_COLOUR('',#270350); +#274464 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274465)); +#274465 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274466 = STYLED_ITEM('color',(#274467),#190566); +#274467 = PRESENTATION_STYLE_ASSIGNMENT((#274468)); +#274468 = SURFACE_STYLE_USAGE(.BOTH.,#274469); +#274469 = SURFACE_SIDE_STYLE('',(#274470,#274473)); +#274470 = SURFACE_STYLE_FILL_AREA(#274471); +#274471 = FILL_AREA_STYLE('',(#274472)); +#274472 = FILL_AREA_STYLE_COLOUR('',#270350); +#274473 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274474)); +#274474 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274475 = STYLED_ITEM('color',(#274476),#190643); +#274476 = PRESENTATION_STYLE_ASSIGNMENT((#274477)); +#274477 = SURFACE_STYLE_USAGE(.BOTH.,#274478); +#274478 = SURFACE_SIDE_STYLE('',(#274479,#274482)); +#274479 = SURFACE_STYLE_FILL_AREA(#274480); +#274480 = FILL_AREA_STYLE('',(#274481)); +#274481 = FILL_AREA_STYLE_COLOUR('',#270350); +#274482 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274483)); +#274483 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274484 = STYLED_ITEM('color',(#274485),#190781); +#274485 = PRESENTATION_STYLE_ASSIGNMENT((#274486)); +#274486 = SURFACE_STYLE_USAGE(.BOTH.,#274487); +#274487 = SURFACE_SIDE_STYLE('',(#274488,#274491)); +#274488 = SURFACE_STYLE_FILL_AREA(#274489); +#274489 = FILL_AREA_STYLE('',(#274490)); +#274490 = FILL_AREA_STYLE_COLOUR('',#270350); +#274491 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274492)); +#274492 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274493 = STYLED_ITEM('color',(#274494),#191030); +#274494 = PRESENTATION_STYLE_ASSIGNMENT((#274495)); +#274495 = SURFACE_STYLE_USAGE(.BOTH.,#274496); +#274496 = SURFACE_SIDE_STYLE('',(#274497,#274500)); +#274497 = SURFACE_STYLE_FILL_AREA(#274498); +#274498 = FILL_AREA_STYLE('',(#274499)); +#274499 = FILL_AREA_STYLE_COLOUR('',#270350); +#274500 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274501)); +#274501 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274502 = STYLED_ITEM('color',(#274503),#191263); +#274503 = PRESENTATION_STYLE_ASSIGNMENT((#274504)); +#274504 = SURFACE_STYLE_USAGE(.BOTH.,#274505); +#274505 = SURFACE_SIDE_STYLE('',(#274506,#274509)); +#274506 = SURFACE_STYLE_FILL_AREA(#274507); +#274507 = FILL_AREA_STYLE('',(#274508)); +#274508 = FILL_AREA_STYLE_COLOUR('',#270350); +#274509 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274510)); +#274510 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274511 = STYLED_ITEM('color',(#274512),#191503); +#274512 = PRESENTATION_STYLE_ASSIGNMENT((#274513)); +#274513 = SURFACE_STYLE_USAGE(.BOTH.,#274514); +#274514 = SURFACE_SIDE_STYLE('',(#274515,#274518)); +#274515 = SURFACE_STYLE_FILL_AREA(#274516); +#274516 = FILL_AREA_STYLE('',(#274517)); +#274517 = FILL_AREA_STYLE_COLOUR('',#270350); +#274518 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274519)); +#274519 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274520 = STYLED_ITEM('color',(#274521),#191547); +#274521 = PRESENTATION_STYLE_ASSIGNMENT((#274522)); +#274522 = SURFACE_STYLE_USAGE(.BOTH.,#274523); +#274523 = SURFACE_SIDE_STYLE('',(#274524,#274527)); +#274524 = SURFACE_STYLE_FILL_AREA(#274525); +#274525 = FILL_AREA_STYLE('',(#274526)); +#274526 = FILL_AREA_STYLE_COLOUR('',#270350); +#274527 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274528)); +#274528 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274529 = STYLED_ITEM('color',(#274530),#191599); +#274530 = PRESENTATION_STYLE_ASSIGNMENT((#274531)); +#274531 = SURFACE_STYLE_USAGE(.BOTH.,#274532); +#274532 = SURFACE_SIDE_STYLE('',(#274533,#274536)); +#274533 = SURFACE_STYLE_FILL_AREA(#274534); +#274534 = FILL_AREA_STYLE('',(#274535)); +#274535 = FILL_AREA_STYLE_COLOUR('',#270350); +#274536 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274537)); +#274537 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274538 = STYLED_ITEM('color',(#274539),#191821); +#274539 = PRESENTATION_STYLE_ASSIGNMENT((#274540)); +#274540 = SURFACE_STYLE_USAGE(.BOTH.,#274541); +#274541 = SURFACE_SIDE_STYLE('',(#274542,#274545)); +#274542 = SURFACE_STYLE_FILL_AREA(#274543); +#274543 = FILL_AREA_STYLE('',(#274544)); +#274544 = FILL_AREA_STYLE_COLOUR('',#270350); +#274545 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274546)); +#274546 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274547 = STYLED_ITEM('color',(#274548),#191947); +#274548 = PRESENTATION_STYLE_ASSIGNMENT((#274549)); +#274549 = SURFACE_STYLE_USAGE(.BOTH.,#274550); +#274550 = SURFACE_SIDE_STYLE('',(#274551,#274554)); +#274551 = SURFACE_STYLE_FILL_AREA(#274552); +#274552 = FILL_AREA_STYLE('',(#274553)); +#274553 = FILL_AREA_STYLE_COLOUR('',#270350); +#274554 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274555)); +#274555 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274556 = STYLED_ITEM('color',(#274557),#192205); +#274557 = PRESENTATION_STYLE_ASSIGNMENT((#274558)); +#274558 = SURFACE_STYLE_USAGE(.BOTH.,#274559); +#274559 = SURFACE_SIDE_STYLE('',(#274560,#274563)); +#274560 = SURFACE_STYLE_FILL_AREA(#274561); +#274561 = FILL_AREA_STYLE('',(#274562)); +#274562 = FILL_AREA_STYLE_COLOUR('',#270350); +#274563 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274564)); +#274564 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274565 = STYLED_ITEM('color',(#274566),#192458); +#274566 = PRESENTATION_STYLE_ASSIGNMENT((#274567)); +#274567 = SURFACE_STYLE_USAGE(.BOTH.,#274568); +#274568 = SURFACE_SIDE_STYLE('',(#274569,#274572)); +#274569 = SURFACE_STYLE_FILL_AREA(#274570); +#274570 = FILL_AREA_STYLE('',(#274571)); +#274571 = FILL_AREA_STYLE_COLOUR('',#270350); +#274572 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274573)); +#274573 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274574 = STYLED_ITEM('color',(#274575),#192527); +#274575 = PRESENTATION_STYLE_ASSIGNMENT((#274576)); +#274576 = SURFACE_STYLE_USAGE(.BOTH.,#274577); +#274577 = SURFACE_SIDE_STYLE('',(#274578,#274581)); +#274578 = SURFACE_STYLE_FILL_AREA(#274579); +#274579 = FILL_AREA_STYLE('',(#274580)); +#274580 = FILL_AREA_STYLE_COLOUR('',#270350); +#274581 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274582)); +#274582 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274583 = STYLED_ITEM('color',(#274584),#192799); +#274584 = PRESENTATION_STYLE_ASSIGNMENT((#274585)); +#274585 = SURFACE_STYLE_USAGE(.BOTH.,#274586); +#274586 = SURFACE_SIDE_STYLE('',(#274587,#274590)); +#274587 = SURFACE_STYLE_FILL_AREA(#274588); +#274588 = FILL_AREA_STYLE('',(#274589)); +#274589 = FILL_AREA_STYLE_COLOUR('',#270350); +#274590 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274591)); +#274591 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274592 = STYLED_ITEM('color',(#274593),#192919); +#274593 = PRESENTATION_STYLE_ASSIGNMENT((#274594)); +#274594 = SURFACE_STYLE_USAGE(.BOTH.,#274595); +#274595 = SURFACE_SIDE_STYLE('',(#274596,#274599)); +#274596 = SURFACE_STYLE_FILL_AREA(#274597); +#274597 = FILL_AREA_STYLE('',(#274598)); +#274598 = FILL_AREA_STYLE_COLOUR('',#270350); +#274599 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274600)); +#274600 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274601 = STYLED_ITEM('color',(#274602),#192971); +#274602 = PRESENTATION_STYLE_ASSIGNMENT((#274603)); +#274603 = SURFACE_STYLE_USAGE(.BOTH.,#274604); +#274604 = SURFACE_SIDE_STYLE('',(#274605,#274608)); +#274605 = SURFACE_STYLE_FILL_AREA(#274606); +#274606 = FILL_AREA_STYLE('',(#274607)); +#274607 = FILL_AREA_STYLE_COLOUR('',#270350); +#274608 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274609)); +#274609 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274610 = STYLED_ITEM('color',(#274611),#193015); +#274611 = PRESENTATION_STYLE_ASSIGNMENT((#274612)); +#274612 = SURFACE_STYLE_USAGE(.BOTH.,#274613); +#274613 = SURFACE_SIDE_STYLE('',(#274614,#274617)); +#274614 = SURFACE_STYLE_FILL_AREA(#274615); +#274615 = FILL_AREA_STYLE('',(#274616)); +#274616 = FILL_AREA_STYLE_COLOUR('',#270350); +#274617 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274618)); +#274618 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274619 = STYLED_ITEM('color',(#274620),#193109); +#274620 = PRESENTATION_STYLE_ASSIGNMENT((#274621)); +#274621 = SURFACE_STYLE_USAGE(.BOTH.,#274622); +#274622 = SURFACE_SIDE_STYLE('',(#274623,#274626)); +#274623 = SURFACE_STYLE_FILL_AREA(#274624); +#274624 = FILL_AREA_STYLE('',(#274625)); +#274625 = FILL_AREA_STYLE_COLOUR('',#270350); +#274626 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274627)); +#274627 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274628 = STYLED_ITEM('color',(#274629),#193177); +#274629 = PRESENTATION_STYLE_ASSIGNMENT((#274630)); +#274630 = SURFACE_STYLE_USAGE(.BOTH.,#274631); +#274631 = SURFACE_SIDE_STYLE('',(#274632,#274635)); +#274632 = SURFACE_STYLE_FILL_AREA(#274633); +#274633 = FILL_AREA_STYLE('',(#274634)); +#274634 = FILL_AREA_STYLE_COLOUR('',#270350); +#274635 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274636)); +#274636 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274637 = STYLED_ITEM('color',(#274638),#193221); +#274638 = PRESENTATION_STYLE_ASSIGNMENT((#274639)); +#274639 = SURFACE_STYLE_USAGE(.BOTH.,#274640); +#274640 = SURFACE_SIDE_STYLE('',(#274641,#274644)); +#274641 = SURFACE_STYLE_FILL_AREA(#274642); +#274642 = FILL_AREA_STYLE('',(#274643)); +#274643 = FILL_AREA_STYLE_COLOUR('',#270350); +#274644 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274645)); +#274645 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274646 = STYLED_ITEM('color',(#274647),#193551); +#274647 = PRESENTATION_STYLE_ASSIGNMENT((#274648)); +#274648 = SURFACE_STYLE_USAGE(.BOTH.,#274649); +#274649 = SURFACE_SIDE_STYLE('',(#274650,#274653)); +#274650 = SURFACE_STYLE_FILL_AREA(#274651); +#274651 = FILL_AREA_STYLE('',(#274652)); +#274652 = FILL_AREA_STYLE_COLOUR('',#270350); +#274653 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274654)); +#274654 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274655 = STYLED_ITEM('color',(#274656),#193668); +#274656 = PRESENTATION_STYLE_ASSIGNMENT((#274657)); +#274657 = SURFACE_STYLE_USAGE(.BOTH.,#274658); +#274658 = SURFACE_SIDE_STYLE('',(#274659,#274662)); +#274659 = SURFACE_STYLE_FILL_AREA(#274660); +#274660 = FILL_AREA_STYLE('',(#274661)); +#274661 = FILL_AREA_STYLE_COLOUR('',#270350); +#274662 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274663)); +#274663 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274664 = STYLED_ITEM('color',(#274665),#193735); +#274665 = PRESENTATION_STYLE_ASSIGNMENT((#274666)); +#274666 = SURFACE_STYLE_USAGE(.BOTH.,#274667); +#274667 = SURFACE_SIDE_STYLE('',(#274668,#274671)); +#274668 = SURFACE_STYLE_FILL_AREA(#274669); +#274669 = FILL_AREA_STYLE('',(#274670)); +#274670 = FILL_AREA_STYLE_COLOUR('',#270350); +#274671 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274672)); +#274672 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274673 = STYLED_ITEM('color',(#274674),#193804); +#274674 = PRESENTATION_STYLE_ASSIGNMENT((#274675)); +#274675 = SURFACE_STYLE_USAGE(.BOTH.,#274676); +#274676 = SURFACE_SIDE_STYLE('',(#274677,#274680)); +#274677 = SURFACE_STYLE_FILL_AREA(#274678); +#274678 = FILL_AREA_STYLE('',(#274679)); +#274679 = FILL_AREA_STYLE_COLOUR('',#270350); +#274680 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274681)); +#274681 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274682 = STYLED_ITEM('color',(#274683),#194005); +#274683 = PRESENTATION_STYLE_ASSIGNMENT((#274684)); +#274684 = SURFACE_STYLE_USAGE(.BOTH.,#274685); +#274685 = SURFACE_SIDE_STYLE('',(#274686,#274689)); +#274686 = SURFACE_STYLE_FILL_AREA(#274687); +#274687 = FILL_AREA_STYLE('',(#274688)); +#274688 = FILL_AREA_STYLE_COLOUR('',#270350); +#274689 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274690)); +#274690 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274691 = STYLED_ITEM('color',(#274692),#194090); +#274692 = PRESENTATION_STYLE_ASSIGNMENT((#274693)); +#274693 = SURFACE_STYLE_USAGE(.BOTH.,#274694); +#274694 = SURFACE_SIDE_STYLE('',(#274695,#274698)); +#274695 = SURFACE_STYLE_FILL_AREA(#274696); +#274696 = FILL_AREA_STYLE('',(#274697)); +#274697 = FILL_AREA_STYLE_COLOUR('',#270350); +#274698 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274699)); +#274699 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274700 = STYLED_ITEM('color',(#274701),#194134); +#274701 = PRESENTATION_STYLE_ASSIGNMENT((#274702)); +#274702 = SURFACE_STYLE_USAGE(.BOTH.,#274703); +#274703 = SURFACE_SIDE_STYLE('',(#274704,#274707)); +#274704 = SURFACE_STYLE_FILL_AREA(#274705); +#274705 = FILL_AREA_STYLE('',(#274706)); +#274706 = FILL_AREA_STYLE_COLOUR('',#270350); +#274707 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274708)); +#274708 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274709 = STYLED_ITEM('color',(#274710),#194178); +#274710 = PRESENTATION_STYLE_ASSIGNMENT((#274711)); +#274711 = SURFACE_STYLE_USAGE(.BOTH.,#274712); +#274712 = SURFACE_SIDE_STYLE('',(#274713,#274716)); +#274713 = SURFACE_STYLE_FILL_AREA(#274714); +#274714 = FILL_AREA_STYLE('',(#274715)); +#274715 = FILL_AREA_STYLE_COLOUR('',#270350); +#274716 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274717)); +#274717 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274718 = STYLED_ITEM('color',(#274719),#194281); +#274719 = PRESENTATION_STYLE_ASSIGNMENT((#274720)); +#274720 = SURFACE_STYLE_USAGE(.BOTH.,#274721); +#274721 = SURFACE_SIDE_STYLE('',(#274722,#274725)); +#274722 = SURFACE_STYLE_FILL_AREA(#274723); +#274723 = FILL_AREA_STYLE('',(#274724)); +#274724 = FILL_AREA_STYLE_COLOUR('',#270350); +#274725 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274726)); +#274726 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274727 = STYLED_ITEM('color',(#274728),#194496); +#274728 = PRESENTATION_STYLE_ASSIGNMENT((#274729)); +#274729 = SURFACE_STYLE_USAGE(.BOTH.,#274730); +#274730 = SURFACE_SIDE_STYLE('',(#274731,#274734)); +#274731 = SURFACE_STYLE_FILL_AREA(#274732); +#274732 = FILL_AREA_STYLE('',(#274733)); +#274733 = FILL_AREA_STYLE_COLOUR('',#270350); +#274734 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274735)); +#274735 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274736 = STYLED_ITEM('color',(#274737),#194667); +#274737 = PRESENTATION_STYLE_ASSIGNMENT((#274738)); +#274738 = SURFACE_STYLE_USAGE(.BOTH.,#274739); +#274739 = SURFACE_SIDE_STYLE('',(#274740,#274743)); +#274740 = SURFACE_STYLE_FILL_AREA(#274741); +#274741 = FILL_AREA_STYLE('',(#274742)); +#274742 = FILL_AREA_STYLE_COLOUR('',#270350); +#274743 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274744)); +#274744 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274745 = STYLED_ITEM('color',(#274746),#194767); +#274746 = PRESENTATION_STYLE_ASSIGNMENT((#274747)); +#274747 = SURFACE_STYLE_USAGE(.BOTH.,#274748); +#274748 = SURFACE_SIDE_STYLE('',(#274749,#274752)); +#274749 = SURFACE_STYLE_FILL_AREA(#274750); +#274750 = FILL_AREA_STYLE('',(#274751)); +#274751 = FILL_AREA_STYLE_COLOUR('',#270350); +#274752 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274753)); +#274753 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274754 = STYLED_ITEM('color',(#274755),#194992); +#274755 = PRESENTATION_STYLE_ASSIGNMENT((#274756)); +#274756 = SURFACE_STYLE_USAGE(.BOTH.,#274757); +#274757 = SURFACE_SIDE_STYLE('',(#274758,#274761)); +#274758 = SURFACE_STYLE_FILL_AREA(#274759); +#274759 = FILL_AREA_STYLE('',(#274760)); +#274760 = FILL_AREA_STYLE_COLOUR('',#270350); +#274761 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274762)); +#274762 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274763 = STYLED_ITEM('color',(#274764),#195223); +#274764 = PRESENTATION_STYLE_ASSIGNMENT((#274765)); +#274765 = SURFACE_STYLE_USAGE(.BOTH.,#274766); +#274766 = SURFACE_SIDE_STYLE('',(#274767,#274770)); +#274767 = SURFACE_STYLE_FILL_AREA(#274768); +#274768 = FILL_AREA_STYLE('',(#274769)); +#274769 = FILL_AREA_STYLE_COLOUR('',#270350); +#274770 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274771)); +#274771 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274772 = STYLED_ITEM('color',(#274773),#195401); +#274773 = PRESENTATION_STYLE_ASSIGNMENT((#274774)); +#274774 = SURFACE_STYLE_USAGE(.BOTH.,#274775); +#274775 = SURFACE_SIDE_STYLE('',(#274776,#274779)); +#274776 = SURFACE_STYLE_FILL_AREA(#274777); +#274777 = FILL_AREA_STYLE('',(#274778)); +#274778 = FILL_AREA_STYLE_COLOUR('',#270350); +#274779 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274780)); +#274780 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274781 = STYLED_ITEM('color',(#274782),#195511); +#274782 = PRESENTATION_STYLE_ASSIGNMENT((#274783)); +#274783 = SURFACE_STYLE_USAGE(.BOTH.,#274784); +#274784 = SURFACE_SIDE_STYLE('',(#274785,#274788)); +#274785 = SURFACE_STYLE_FILL_AREA(#274786); +#274786 = FILL_AREA_STYLE('',(#274787)); +#274787 = FILL_AREA_STYLE_COLOUR('',#270350); +#274788 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274789)); +#274789 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274790 = STYLED_ITEM('color',(#274791),#195621); +#274791 = PRESENTATION_STYLE_ASSIGNMENT((#274792)); +#274792 = SURFACE_STYLE_USAGE(.BOTH.,#274793); +#274793 = SURFACE_SIDE_STYLE('',(#274794,#274797)); +#274794 = SURFACE_STYLE_FILL_AREA(#274795); +#274795 = FILL_AREA_STYLE('',(#274796)); +#274796 = FILL_AREA_STYLE_COLOUR('',#270350); +#274797 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274798)); +#274798 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274799 = STYLED_ITEM('color',(#274800),#195748); +#274800 = PRESENTATION_STYLE_ASSIGNMENT((#274801)); +#274801 = SURFACE_STYLE_USAGE(.BOTH.,#274802); +#274802 = SURFACE_SIDE_STYLE('',(#274803,#274806)); +#274803 = SURFACE_STYLE_FILL_AREA(#274804); +#274804 = FILL_AREA_STYLE('',(#274805)); +#274805 = FILL_AREA_STYLE_COLOUR('',#270350); +#274806 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274807)); +#274807 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274808 = STYLED_ITEM('color',(#274809),#195875); +#274809 = PRESENTATION_STYLE_ASSIGNMENT((#274810)); +#274810 = SURFACE_STYLE_USAGE(.BOTH.,#274811); +#274811 = SURFACE_SIDE_STYLE('',(#274812,#274815)); +#274812 = SURFACE_STYLE_FILL_AREA(#274813); +#274813 = FILL_AREA_STYLE('',(#274814)); +#274814 = FILL_AREA_STYLE_COLOUR('',#270350); +#274815 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274816)); +#274816 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274817 = STYLED_ITEM('color',(#274818),#196069); +#274818 = PRESENTATION_STYLE_ASSIGNMENT((#274819)); +#274819 = SURFACE_STYLE_USAGE(.BOTH.,#274820); +#274820 = SURFACE_SIDE_STYLE('',(#274821,#274824)); +#274821 = SURFACE_STYLE_FILL_AREA(#274822); +#274822 = FILL_AREA_STYLE('',(#274823)); +#274823 = FILL_AREA_STYLE_COLOUR('',#270350); +#274824 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274825)); +#274825 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274826 = STYLED_ITEM('color',(#274827),#196341); +#274827 = PRESENTATION_STYLE_ASSIGNMENT((#274828)); +#274828 = SURFACE_STYLE_USAGE(.BOTH.,#274829); +#274829 = SURFACE_SIDE_STYLE('',(#274830,#274833)); +#274830 = SURFACE_STYLE_FILL_AREA(#274831); +#274831 = FILL_AREA_STYLE('',(#274832)); +#274832 = FILL_AREA_STYLE_COLOUR('',#270350); +#274833 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274834)); +#274834 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274835 = STYLED_ITEM('color',(#274836),#196418); +#274836 = PRESENTATION_STYLE_ASSIGNMENT((#274837)); +#274837 = SURFACE_STYLE_USAGE(.BOTH.,#274838); +#274838 = SURFACE_SIDE_STYLE('',(#274839,#274842)); +#274839 = SURFACE_STYLE_FILL_AREA(#274840); +#274840 = FILL_AREA_STYLE('',(#274841)); +#274841 = FILL_AREA_STYLE_COLOUR('',#270350); +#274842 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274843)); +#274843 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274844 = STYLED_ITEM('color',(#274845),#196495); +#274845 = PRESENTATION_STYLE_ASSIGNMENT((#274846)); +#274846 = SURFACE_STYLE_USAGE(.BOTH.,#274847); +#274847 = SURFACE_SIDE_STYLE('',(#274848,#274851)); +#274848 = SURFACE_STYLE_FILL_AREA(#274849); +#274849 = FILL_AREA_STYLE('',(#274850)); +#274850 = FILL_AREA_STYLE_COLOUR('',#270350); +#274851 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274852)); +#274852 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274853 = STYLED_ITEM('color',(#274854),#196539); +#274854 = PRESENTATION_STYLE_ASSIGNMENT((#274855)); +#274855 = SURFACE_STYLE_USAGE(.BOTH.,#274856); +#274856 = SURFACE_SIDE_STYLE('',(#274857,#274860)); +#274857 = SURFACE_STYLE_FILL_AREA(#274858); +#274858 = FILL_AREA_STYLE('',(#274859)); +#274859 = FILL_AREA_STYLE_COLOUR('',#270350); +#274860 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274861)); +#274861 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274862 = STYLED_ITEM('color',(#274863),#196987); +#274863 = PRESENTATION_STYLE_ASSIGNMENT((#274864)); +#274864 = SURFACE_STYLE_USAGE(.BOTH.,#274865); +#274865 = SURFACE_SIDE_STYLE('',(#274866,#274869)); +#274866 = SURFACE_STYLE_FILL_AREA(#274867); +#274867 = FILL_AREA_STYLE('',(#274868)); +#274868 = FILL_AREA_STYLE_COLOUR('',#270350); +#274869 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274870)); +#274870 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274871 = STYLED_ITEM('color',(#274872),#197180); +#274872 = PRESENTATION_STYLE_ASSIGNMENT((#274873)); +#274873 = SURFACE_STYLE_USAGE(.BOTH.,#274874); +#274874 = SURFACE_SIDE_STYLE('',(#274875,#274878)); +#274875 = SURFACE_STYLE_FILL_AREA(#274876); +#274876 = FILL_AREA_STYLE('',(#274877)); +#274877 = FILL_AREA_STYLE_COLOUR('',#270350); +#274878 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274879)); +#274879 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274880 = STYLED_ITEM('color',(#274881),#197416); +#274881 = PRESENTATION_STYLE_ASSIGNMENT((#274882)); +#274882 = SURFACE_STYLE_USAGE(.BOTH.,#274883); +#274883 = SURFACE_SIDE_STYLE('',(#274884,#274887)); +#274884 = SURFACE_STYLE_FILL_AREA(#274885); +#274885 = FILL_AREA_STYLE('',(#274886)); +#274886 = FILL_AREA_STYLE_COLOUR('',#270350); +#274887 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274888)); +#274888 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274889 = STYLED_ITEM('color',(#274890),#197623); +#274890 = PRESENTATION_STYLE_ASSIGNMENT((#274891)); +#274891 = SURFACE_STYLE_USAGE(.BOTH.,#274892); +#274892 = SURFACE_SIDE_STYLE('',(#274893,#274896)); +#274893 = SURFACE_STYLE_FILL_AREA(#274894); +#274894 = FILL_AREA_STYLE('',(#274895)); +#274895 = FILL_AREA_STYLE_COLOUR('',#270350); +#274896 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274897)); +#274897 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274898 = STYLED_ITEM('color',(#274899),#197826); +#274899 = PRESENTATION_STYLE_ASSIGNMENT((#274900)); +#274900 = SURFACE_STYLE_USAGE(.BOTH.,#274901); +#274901 = SURFACE_SIDE_STYLE('',(#274902,#274905)); +#274902 = SURFACE_STYLE_FILL_AREA(#274903); +#274903 = FILL_AREA_STYLE('',(#274904)); +#274904 = FILL_AREA_STYLE_COLOUR('',#270350); +#274905 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274906)); +#274906 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274907 = STYLED_ITEM('color',(#274908),#197982); +#274908 = PRESENTATION_STYLE_ASSIGNMENT((#274909)); +#274909 = SURFACE_STYLE_USAGE(.BOTH.,#274910); +#274910 = SURFACE_SIDE_STYLE('',(#274911,#274914)); +#274911 = SURFACE_STYLE_FILL_AREA(#274912); +#274912 = FILL_AREA_STYLE('',(#274913)); +#274913 = FILL_AREA_STYLE_COLOUR('',#270350); +#274914 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274915)); +#274915 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274916 = STYLED_ITEM('color',(#274917),#198174); +#274917 = PRESENTATION_STYLE_ASSIGNMENT((#274918)); +#274918 = SURFACE_STYLE_USAGE(.BOTH.,#274919); +#274919 = SURFACE_SIDE_STYLE('',(#274920,#274923)); +#274920 = SURFACE_STYLE_FILL_AREA(#274921); +#274921 = FILL_AREA_STYLE('',(#274922)); +#274922 = FILL_AREA_STYLE_COLOUR('',#270350); +#274923 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274924)); +#274924 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274925 = STYLED_ITEM('color',(#274926),#198300); +#274926 = PRESENTATION_STYLE_ASSIGNMENT((#274927)); +#274927 = SURFACE_STYLE_USAGE(.BOTH.,#274928); +#274928 = SURFACE_SIDE_STYLE('',(#274929,#274932)); +#274929 = SURFACE_STYLE_FILL_AREA(#274930); +#274930 = FILL_AREA_STYLE('',(#274931)); +#274931 = FILL_AREA_STYLE_COLOUR('',#270350); +#274932 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274933)); +#274933 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274934 = STYLED_ITEM('color',(#274935),#198558); +#274935 = PRESENTATION_STYLE_ASSIGNMENT((#274936)); +#274936 = SURFACE_STYLE_USAGE(.BOTH.,#274937); +#274937 = SURFACE_SIDE_STYLE('',(#274938,#274941)); +#274938 = SURFACE_STYLE_FILL_AREA(#274939); +#274939 = FILL_AREA_STYLE('',(#274940)); +#274940 = FILL_AREA_STYLE_COLOUR('',#270350); +#274941 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274942)); +#274942 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274943 = STYLED_ITEM('color',(#274944),#198660); +#274944 = PRESENTATION_STYLE_ASSIGNMENT((#274945)); +#274945 = SURFACE_STYLE_USAGE(.BOTH.,#274946); +#274946 = SURFACE_SIDE_STYLE('',(#274947,#274950)); +#274947 = SURFACE_STYLE_FILL_AREA(#274948); +#274948 = FILL_AREA_STYLE('',(#274949)); +#274949 = FILL_AREA_STYLE_COLOUR('',#270350); +#274950 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274951)); +#274951 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274952 = STYLED_ITEM('color',(#274953),#198779); +#274953 = PRESENTATION_STYLE_ASSIGNMENT((#274954)); +#274954 = SURFACE_STYLE_USAGE(.BOTH.,#274955); +#274955 = SURFACE_SIDE_STYLE('',(#274956,#274959)); +#274956 = SURFACE_STYLE_FILL_AREA(#274957); +#274957 = FILL_AREA_STYLE('',(#274958)); +#274958 = FILL_AREA_STYLE_COLOUR('',#270350); +#274959 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274960)); +#274960 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274961 = STYLED_ITEM('color',(#274962),#199028); +#274962 = PRESENTATION_STYLE_ASSIGNMENT((#274963)); +#274963 = SURFACE_STYLE_USAGE(.BOTH.,#274964); +#274964 = SURFACE_SIDE_STYLE('',(#274965,#274968)); +#274965 = SURFACE_STYLE_FILL_AREA(#274966); +#274966 = FILL_AREA_STYLE('',(#274967)); +#274967 = FILL_AREA_STYLE_COLOUR('',#270350); +#274968 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274969)); +#274969 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274970 = STYLED_ITEM('color',(#274971),#199180); +#274971 = PRESENTATION_STYLE_ASSIGNMENT((#274972)); +#274972 = SURFACE_STYLE_USAGE(.BOTH.,#274973); +#274973 = SURFACE_SIDE_STYLE('',(#274974,#274977)); +#274974 = SURFACE_STYLE_FILL_AREA(#274975); +#274975 = FILL_AREA_STYLE('',(#274976)); +#274976 = FILL_AREA_STYLE_COLOUR('',#270350); +#274977 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274978)); +#274978 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274979 = STYLED_ITEM('color',(#274980),#199315); +#274980 = PRESENTATION_STYLE_ASSIGNMENT((#274981)); +#274981 = SURFACE_STYLE_USAGE(.BOTH.,#274982); +#274982 = SURFACE_SIDE_STYLE('',(#274983,#274986)); +#274983 = SURFACE_STYLE_FILL_AREA(#274984); +#274984 = FILL_AREA_STYLE('',(#274985)); +#274985 = FILL_AREA_STYLE_COLOUR('',#270350); +#274986 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274987)); +#274987 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274988 = STYLED_ITEM('color',(#274989),#199499); +#274989 = PRESENTATION_STYLE_ASSIGNMENT((#274990)); +#274990 = SURFACE_STYLE_USAGE(.BOTH.,#274991); +#274991 = SURFACE_SIDE_STYLE('',(#274992,#274995)); +#274992 = SURFACE_STYLE_FILL_AREA(#274993); +#274993 = FILL_AREA_STYLE('',(#274994)); +#274994 = FILL_AREA_STYLE_COLOUR('',#270350); +#274995 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#274996)); +#274996 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274997 = STYLED_ITEM('color',(#274998),#199593); +#274998 = PRESENTATION_STYLE_ASSIGNMENT((#274999)); +#274999 = SURFACE_STYLE_USAGE(.BOTH.,#275000); +#275000 = SURFACE_SIDE_STYLE('',(#275001,#275004)); +#275001 = SURFACE_STYLE_FILL_AREA(#275002); +#275002 = FILL_AREA_STYLE('',(#275003)); +#275003 = FILL_AREA_STYLE_COLOUR('',#270350); +#275004 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275005)); +#275005 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275006 = STYLED_ITEM('color',(#275007),#199728); +#275007 = PRESENTATION_STYLE_ASSIGNMENT((#275008)); +#275008 = SURFACE_STYLE_USAGE(.BOTH.,#275009); +#275009 = SURFACE_SIDE_STYLE('',(#275010,#275013)); +#275010 = SURFACE_STYLE_FILL_AREA(#275011); +#275011 = FILL_AREA_STYLE('',(#275012)); +#275012 = FILL_AREA_STYLE_COLOUR('',#270350); +#275013 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275014)); +#275014 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275015 = STYLED_ITEM('color',(#275016),#199838); +#275016 = PRESENTATION_STYLE_ASSIGNMENT((#275017)); +#275017 = SURFACE_STYLE_USAGE(.BOTH.,#275018); +#275018 = SURFACE_SIDE_STYLE('',(#275019,#275022)); +#275019 = SURFACE_STYLE_FILL_AREA(#275020); +#275020 = FILL_AREA_STYLE('',(#275021)); +#275021 = FILL_AREA_STYLE_COLOUR('',#270350); +#275022 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275023)); +#275023 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275024 = STYLED_ITEM('color',(#275025),#200032); +#275025 = PRESENTATION_STYLE_ASSIGNMENT((#275026)); +#275026 = SURFACE_STYLE_USAGE(.BOTH.,#275027); +#275027 = SURFACE_SIDE_STYLE('',(#275028,#275031)); +#275028 = SURFACE_STYLE_FILL_AREA(#275029); +#275029 = FILL_AREA_STYLE('',(#275030)); +#275030 = FILL_AREA_STYLE_COLOUR('',#270350); +#275031 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275032)); +#275032 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275033 = STYLED_ITEM('color',(#275034),#200151); +#275034 = PRESENTATION_STYLE_ASSIGNMENT((#275035)); +#275035 = SURFACE_STYLE_USAGE(.BOTH.,#275036); +#275036 = SURFACE_SIDE_STYLE('',(#275037,#275040)); +#275037 = SURFACE_STYLE_FILL_AREA(#275038); +#275038 = FILL_AREA_STYLE('',(#275039)); +#275039 = FILL_AREA_STYLE_COLOUR('',#270350); +#275040 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275041)); +#275041 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275042 = STYLED_ITEM('color',(#275043),#200203); +#275043 = PRESENTATION_STYLE_ASSIGNMENT((#275044)); +#275044 = SURFACE_STYLE_USAGE(.BOTH.,#275045); +#275045 = SURFACE_SIDE_STYLE('',(#275046,#275049)); +#275046 = SURFACE_STYLE_FILL_AREA(#275047); +#275047 = FILL_AREA_STYLE('',(#275048)); +#275048 = FILL_AREA_STYLE_COLOUR('',#270350); +#275049 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275050)); +#275050 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275051 = STYLED_ITEM('color',(#275052),#200345); +#275052 = PRESENTATION_STYLE_ASSIGNMENT((#275053)); +#275053 = SURFACE_STYLE_USAGE(.BOTH.,#275054); +#275054 = SURFACE_SIDE_STYLE('',(#275055,#275058)); +#275055 = SURFACE_STYLE_FILL_AREA(#275056); +#275056 = FILL_AREA_STYLE('',(#275057)); +#275057 = FILL_AREA_STYLE_COLOUR('',#270350); +#275058 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275059)); +#275059 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275060 = STYLED_ITEM('color',(#275061),#200523); +#275061 = PRESENTATION_STYLE_ASSIGNMENT((#275062)); +#275062 = SURFACE_STYLE_USAGE(.BOTH.,#275063); +#275063 = SURFACE_SIDE_STYLE('',(#275064,#275067)); +#275064 = SURFACE_STYLE_FILL_AREA(#275065); +#275065 = FILL_AREA_STYLE('',(#275066)); +#275066 = FILL_AREA_STYLE_COLOUR('',#270350); +#275067 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275068)); +#275068 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275069 = STYLED_ITEM('color',(#275070),#200688); +#275070 = PRESENTATION_STYLE_ASSIGNMENT((#275071)); +#275071 = SURFACE_STYLE_USAGE(.BOTH.,#275072); +#275072 = SURFACE_SIDE_STYLE('',(#275073,#275076)); +#275073 = SURFACE_STYLE_FILL_AREA(#275074); +#275074 = FILL_AREA_STYLE('',(#275075)); +#275075 = FILL_AREA_STYLE_COLOUR('',#270350); +#275076 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275077)); +#275077 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275078 = STYLED_ITEM('color',(#275079),#200782); +#275079 = PRESENTATION_STYLE_ASSIGNMENT((#275080)); +#275080 = SURFACE_STYLE_USAGE(.BOTH.,#275081); +#275081 = SURFACE_SIDE_STYLE('',(#275082,#275085)); +#275082 = SURFACE_STYLE_FILL_AREA(#275083); +#275083 = FILL_AREA_STYLE('',(#275084)); +#275084 = FILL_AREA_STYLE_COLOUR('',#270350); +#275085 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275086)); +#275086 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275087 = STYLED_ITEM('color',(#275088),#200920); +#275088 = PRESENTATION_STYLE_ASSIGNMENT((#275089)); +#275089 = SURFACE_STYLE_USAGE(.BOTH.,#275090); +#275090 = SURFACE_SIDE_STYLE('',(#275091,#275094)); +#275091 = SURFACE_STYLE_FILL_AREA(#275092); +#275092 = FILL_AREA_STYLE('',(#275093)); +#275093 = FILL_AREA_STYLE_COLOUR('',#270350); +#275094 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275095)); +#275095 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275096 = STYLED_ITEM('color',(#275097),#201055); +#275097 = PRESENTATION_STYLE_ASSIGNMENT((#275098)); +#275098 = SURFACE_STYLE_USAGE(.BOTH.,#275099); +#275099 = SURFACE_SIDE_STYLE('',(#275100,#275103)); +#275100 = SURFACE_STYLE_FILL_AREA(#275101); +#275101 = FILL_AREA_STYLE('',(#275102)); +#275102 = FILL_AREA_STYLE_COLOUR('',#270350); +#275103 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275104)); +#275104 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275105 = STYLED_ITEM('color',(#275106),#201233); +#275106 = PRESENTATION_STYLE_ASSIGNMENT((#275107)); +#275107 = SURFACE_STYLE_USAGE(.BOTH.,#275108); +#275108 = SURFACE_SIDE_STYLE('',(#275109,#275112)); +#275109 = SURFACE_STYLE_FILL_AREA(#275110); +#275110 = FILL_AREA_STYLE('',(#275111)); +#275111 = FILL_AREA_STYLE_COLOUR('',#270350); +#275112 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275113)); +#275113 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275114 = STYLED_ITEM('color',(#275115),#201413); +#275115 = PRESENTATION_STYLE_ASSIGNMENT((#275116)); +#275116 = SURFACE_STYLE_USAGE(.BOTH.,#275117); +#275117 = SURFACE_SIDE_STYLE('',(#275118,#275121)); +#275118 = SURFACE_STYLE_FILL_AREA(#275119); +#275119 = FILL_AREA_STYLE('',(#275120)); +#275120 = FILL_AREA_STYLE_COLOUR('',#270350); +#275121 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275122)); +#275122 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275123 = STYLED_ITEM('color',(#275124),#201591); +#275124 = PRESENTATION_STYLE_ASSIGNMENT((#275125)); +#275125 = SURFACE_STYLE_USAGE(.BOTH.,#275126); +#275126 = SURFACE_SIDE_STYLE('',(#275127,#275130)); +#275127 = SURFACE_STYLE_FILL_AREA(#275128); +#275128 = FILL_AREA_STYLE('',(#275129)); +#275129 = FILL_AREA_STYLE_COLOUR('',#270350); +#275130 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275131)); +#275131 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275132 = STYLED_ITEM('color',(#275133),#201775); +#275133 = PRESENTATION_STYLE_ASSIGNMENT((#275134)); +#275134 = SURFACE_STYLE_USAGE(.BOTH.,#275135); +#275135 = SURFACE_SIDE_STYLE('',(#275136,#275139)); +#275136 = SURFACE_STYLE_FILL_AREA(#275137); +#275137 = FILL_AREA_STYLE('',(#275138)); +#275138 = FILL_AREA_STYLE_COLOUR('',#270350); +#275139 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275140)); +#275140 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275141 = STYLED_ITEM('color',(#275142),#201819); +#275142 = PRESENTATION_STYLE_ASSIGNMENT((#275143)); +#275143 = SURFACE_STYLE_USAGE(.BOTH.,#275144); +#275144 = SURFACE_SIDE_STYLE('',(#275145,#275148)); +#275145 = SURFACE_STYLE_FILL_AREA(#275146); +#275146 = FILL_AREA_STYLE('',(#275147)); +#275147 = FILL_AREA_STYLE_COLOUR('',#270350); +#275148 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275149)); +#275149 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275150 = STYLED_ITEM('color',(#275151),#201871); +#275151 = PRESENTATION_STYLE_ASSIGNMENT((#275152)); +#275152 = SURFACE_STYLE_USAGE(.BOTH.,#275153); +#275153 = SURFACE_SIDE_STYLE('',(#275154,#275157)); +#275154 = SURFACE_STYLE_FILL_AREA(#275155); +#275155 = FILL_AREA_STYLE('',(#275156)); +#275156 = FILL_AREA_STYLE_COLOUR('',#270350); +#275157 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275158)); +#275158 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275159 = STYLED_ITEM('color',(#275160),#202083); +#275160 = PRESENTATION_STYLE_ASSIGNMENT((#275161)); +#275161 = SURFACE_STYLE_USAGE(.BOTH.,#275162); +#275162 = SURFACE_SIDE_STYLE('',(#275163,#275166)); +#275163 = SURFACE_STYLE_FILL_AREA(#275164); +#275164 = FILL_AREA_STYLE('',(#275165)); +#275165 = FILL_AREA_STYLE_COLOUR('',#270350); +#275166 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275167)); +#275167 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275168 = STYLED_ITEM('color',(#275169),#202332); +#275169 = PRESENTATION_STYLE_ASSIGNMENT((#275170)); +#275170 = SURFACE_STYLE_USAGE(.BOTH.,#275171); +#275171 = SURFACE_SIDE_STYLE('',(#275172,#275175)); +#275172 = SURFACE_STYLE_FILL_AREA(#275173); +#275173 = FILL_AREA_STYLE('',(#275174)); +#275174 = FILL_AREA_STYLE_COLOUR('',#270350); +#275175 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275176)); +#275176 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275177 = STYLED_ITEM('color',(#275178),#202442); +#275178 = PRESENTATION_STYLE_ASSIGNMENT((#275179)); +#275179 = SURFACE_STYLE_USAGE(.BOTH.,#275180); +#275180 = SURFACE_SIDE_STYLE('',(#275181,#275184)); +#275181 = SURFACE_STYLE_FILL_AREA(#275182); +#275182 = FILL_AREA_STYLE('',(#275183)); +#275183 = FILL_AREA_STYLE_COLOUR('',#270350); +#275184 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275185)); +#275185 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275186 = STYLED_ITEM('color',(#275187),#202636); +#275187 = PRESENTATION_STYLE_ASSIGNMENT((#275188)); +#275188 = SURFACE_STYLE_USAGE(.BOTH.,#275189); +#275189 = SURFACE_SIDE_STYLE('',(#275190,#275193)); +#275190 = SURFACE_STYLE_FILL_AREA(#275191); +#275191 = FILL_AREA_STYLE('',(#275192)); +#275192 = FILL_AREA_STYLE_COLOUR('',#270350); +#275193 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275194)); +#275194 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275195 = STYLED_ITEM('color',(#275196),#202916); +#275196 = PRESENTATION_STYLE_ASSIGNMENT((#275197)); +#275197 = SURFACE_STYLE_USAGE(.BOTH.,#275198); +#275198 = SURFACE_SIDE_STYLE('',(#275199,#275202)); +#275199 = SURFACE_STYLE_FILL_AREA(#275200); +#275200 = FILL_AREA_STYLE('',(#275201)); +#275201 = FILL_AREA_STYLE_COLOUR('',#270350); +#275202 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275203)); +#275203 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275204 = STYLED_ITEM('color',(#275205),#202968); +#275205 = PRESENTATION_STYLE_ASSIGNMENT((#275206)); +#275206 = SURFACE_STYLE_USAGE(.BOTH.,#275207); +#275207 = SURFACE_SIDE_STYLE('',(#275208,#275211)); +#275208 = SURFACE_STYLE_FILL_AREA(#275209); +#275209 = FILL_AREA_STYLE('',(#275210)); +#275210 = FILL_AREA_STYLE_COLOUR('',#270350); +#275211 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275212)); +#275212 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275213 = STYLED_ITEM('color',(#275214),#203169); +#275214 = PRESENTATION_STYLE_ASSIGNMENT((#275215)); +#275215 = SURFACE_STYLE_USAGE(.BOTH.,#275216); +#275216 = SURFACE_SIDE_STYLE('',(#275217,#275220)); +#275217 = SURFACE_STYLE_FILL_AREA(#275218); +#275218 = FILL_AREA_STYLE('',(#275219)); +#275219 = FILL_AREA_STYLE_COLOUR('',#270350); +#275220 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275221)); +#275221 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275222 = STYLED_ITEM('color',(#275223),#203449); +#275223 = PRESENTATION_STYLE_ASSIGNMENT((#275224)); +#275224 = SURFACE_STYLE_USAGE(.BOTH.,#275225); +#275225 = SURFACE_SIDE_STYLE('',(#275226,#275229)); +#275226 = SURFACE_STYLE_FILL_AREA(#275227); +#275227 = FILL_AREA_STYLE('',(#275228)); +#275228 = FILL_AREA_STYLE_COLOUR('',#270350); +#275229 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275230)); +#275230 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275231 = STYLED_ITEM('color',(#275232),#203717); +#275232 = PRESENTATION_STYLE_ASSIGNMENT((#275233)); +#275233 = SURFACE_STYLE_USAGE(.BOTH.,#275234); +#275234 = SURFACE_SIDE_STYLE('',(#275235,#275238)); +#275235 = SURFACE_STYLE_FILL_AREA(#275236); +#275236 = FILL_AREA_STYLE('',(#275237)); +#275237 = FILL_AREA_STYLE_COLOUR('',#270350); +#275238 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275239)); +#275239 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275240 = STYLED_ITEM('color',(#275241),#203997); +#275241 = PRESENTATION_STYLE_ASSIGNMENT((#275242)); +#275242 = SURFACE_STYLE_USAGE(.BOTH.,#275243); +#275243 = SURFACE_SIDE_STYLE('',(#275244,#275247)); +#275244 = SURFACE_STYLE_FILL_AREA(#275245); +#275245 = FILL_AREA_STYLE('',(#275246)); +#275246 = FILL_AREA_STYLE_COLOUR('',#270350); +#275247 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275248)); +#275248 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275249 = STYLED_ITEM('color',(#275250),#204265); +#275250 = PRESENTATION_STYLE_ASSIGNMENT((#275251)); +#275251 = SURFACE_STYLE_USAGE(.BOTH.,#275252); +#275252 = SURFACE_SIDE_STYLE('',(#275253,#275256)); +#275253 = SURFACE_STYLE_FILL_AREA(#275254); +#275254 = FILL_AREA_STYLE('',(#275255)); +#275255 = FILL_AREA_STYLE_COLOUR('',#270350); +#275256 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275257)); +#275257 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275258 = STYLED_ITEM('color',(#275259),#204533); +#275259 = PRESENTATION_STYLE_ASSIGNMENT((#275260)); +#275260 = SURFACE_STYLE_USAGE(.BOTH.,#275261); +#275261 = SURFACE_SIDE_STYLE('',(#275262,#275265)); +#275262 = SURFACE_STYLE_FILL_AREA(#275263); +#275263 = FILL_AREA_STYLE('',(#275264)); +#275264 = FILL_AREA_STYLE_COLOUR('',#270350); +#275265 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275266)); +#275266 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275267 = STYLED_ITEM('color',(#275268),#204801); +#275268 = PRESENTATION_STYLE_ASSIGNMENT((#275269)); +#275269 = SURFACE_STYLE_USAGE(.BOTH.,#275270); +#275270 = SURFACE_SIDE_STYLE('',(#275271,#275274)); +#275271 = SURFACE_STYLE_FILL_AREA(#275272); +#275272 = FILL_AREA_STYLE('',(#275273)); +#275273 = FILL_AREA_STYLE_COLOUR('',#270350); +#275274 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275275)); +#275275 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275276 = STYLED_ITEM('color',(#275277),#205069); +#275277 = PRESENTATION_STYLE_ASSIGNMENT((#275278)); +#275278 = SURFACE_STYLE_USAGE(.BOTH.,#275279); +#275279 = SURFACE_SIDE_STYLE('',(#275280,#275283)); +#275280 = SURFACE_STYLE_FILL_AREA(#275281); +#275281 = FILL_AREA_STYLE('',(#275282)); +#275282 = FILL_AREA_STYLE_COLOUR('',#270350); +#275283 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275284)); +#275284 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275285 = STYLED_ITEM('color',(#275286),#205179); +#275286 = PRESENTATION_STYLE_ASSIGNMENT((#275287)); +#275287 = SURFACE_STYLE_USAGE(.BOTH.,#275288); +#275288 = SURFACE_SIDE_STYLE('',(#275289,#275292)); +#275289 = SURFACE_STYLE_FILL_AREA(#275290); +#275290 = FILL_AREA_STYLE('',(#275291)); +#275291 = FILL_AREA_STYLE_COLOUR('',#270350); +#275292 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275293)); +#275293 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275294 = STYLED_ITEM('color',(#275295),#205314); +#275295 = PRESENTATION_STYLE_ASSIGNMENT((#275296)); +#275296 = SURFACE_STYLE_USAGE(.BOTH.,#275297); +#275297 = SURFACE_SIDE_STYLE('',(#275298,#275301)); +#275298 = SURFACE_STYLE_FILL_AREA(#275299); +#275299 = FILL_AREA_STYLE('',(#275300)); +#275300 = FILL_AREA_STYLE_COLOUR('',#270350); +#275301 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275302)); +#275302 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275303 = STYLED_ITEM('color',(#275304),#205664); +#275304 = PRESENTATION_STYLE_ASSIGNMENT((#275305)); +#275305 = SURFACE_STYLE_USAGE(.BOTH.,#275306); +#275306 = SURFACE_SIDE_STYLE('',(#275307,#275310)); +#275307 = SURFACE_STYLE_FILL_AREA(#275308); +#275308 = FILL_AREA_STYLE('',(#275309)); +#275309 = FILL_AREA_STYLE_COLOUR('',#270350); +#275310 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275311)); +#275311 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275312 = STYLED_ITEM('color',(#275313),#205874); +#275313 = PRESENTATION_STYLE_ASSIGNMENT((#275314)); +#275314 = SURFACE_STYLE_USAGE(.BOTH.,#275315); +#275315 = SURFACE_SIDE_STYLE('',(#275316,#275319)); +#275316 = SURFACE_STYLE_FILL_AREA(#275317); +#275317 = FILL_AREA_STYLE('',(#275318)); +#275318 = FILL_AREA_STYLE_COLOUR('',#270350); +#275319 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275320)); +#275320 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275321 = STYLED_ITEM('color',(#275322),#205984); +#275322 = PRESENTATION_STYLE_ASSIGNMENT((#275323)); +#275323 = SURFACE_STYLE_USAGE(.BOTH.,#275324); +#275324 = SURFACE_SIDE_STYLE('',(#275325,#275328)); +#275325 = SURFACE_STYLE_FILL_AREA(#275326); +#275326 = FILL_AREA_STYLE('',(#275327)); +#275327 = FILL_AREA_STYLE_COLOUR('',#270350); +#275328 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275329)); +#275329 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275330 = STYLED_ITEM('color',(#275331),#206061); +#275331 = PRESENTATION_STYLE_ASSIGNMENT((#275332)); +#275332 = SURFACE_STYLE_USAGE(.BOTH.,#275333); +#275333 = SURFACE_SIDE_STYLE('',(#275334,#275337)); +#275334 = SURFACE_STYLE_FILL_AREA(#275335); +#275335 = FILL_AREA_STYLE('',(#275336)); +#275336 = FILL_AREA_STYLE_COLOUR('',#270350); +#275337 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275338)); +#275338 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275339 = STYLED_ITEM('color',(#275340),#206188); +#275340 = PRESENTATION_STYLE_ASSIGNMENT((#275341)); +#275341 = SURFACE_STYLE_USAGE(.BOTH.,#275342); +#275342 = SURFACE_SIDE_STYLE('',(#275343,#275346)); +#275343 = SURFACE_STYLE_FILL_AREA(#275344); +#275344 = FILL_AREA_STYLE('',(#275345)); +#275345 = FILL_AREA_STYLE_COLOUR('',#270350); +#275346 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275347)); +#275347 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275348 = STYLED_ITEM('color',(#275349),#206273); +#275349 = PRESENTATION_STYLE_ASSIGNMENT((#275350)); +#275350 = SURFACE_STYLE_USAGE(.BOTH.,#275351); +#275351 = SURFACE_SIDE_STYLE('',(#275352,#275355)); +#275352 = SURFACE_STYLE_FILL_AREA(#275353); +#275353 = FILL_AREA_STYLE('',(#275354)); +#275354 = FILL_AREA_STYLE_COLOUR('',#270350); +#275355 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275356)); +#275356 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275357 = STYLED_ITEM('color',(#275358),#206358); +#275358 = PRESENTATION_STYLE_ASSIGNMENT((#275359)); +#275359 = SURFACE_STYLE_USAGE(.BOTH.,#275360); +#275360 = SURFACE_SIDE_STYLE('',(#275361,#275364)); +#275361 = SURFACE_STYLE_FILL_AREA(#275362); +#275362 = FILL_AREA_STYLE('',(#275363)); +#275363 = FILL_AREA_STYLE_COLOUR('',#270350); +#275364 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275365)); +#275365 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275366 = STYLED_ITEM('color',(#275367),#206459); +#275367 = PRESENTATION_STYLE_ASSIGNMENT((#275368)); +#275368 = SURFACE_STYLE_USAGE(.BOTH.,#275369); +#275369 = SURFACE_SIDE_STYLE('',(#275370,#275373)); +#275370 = SURFACE_STYLE_FILL_AREA(#275371); +#275371 = FILL_AREA_STYLE('',(#275372)); +#275372 = FILL_AREA_STYLE_COLOUR('',#270350); +#275373 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275374)); +#275374 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275375 = STYLED_ITEM('color',(#275376),#206660); +#275376 = PRESENTATION_STYLE_ASSIGNMENT((#275377)); +#275377 = SURFACE_STYLE_USAGE(.BOTH.,#275378); +#275378 = SURFACE_SIDE_STYLE('',(#275379,#275382)); +#275379 = SURFACE_STYLE_FILL_AREA(#275380); +#275380 = FILL_AREA_STYLE('',(#275381)); +#275381 = FILL_AREA_STYLE_COLOUR('',#270350); +#275382 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275383)); +#275383 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275384 = STYLED_ITEM('color',(#275385),#206770); +#275385 = PRESENTATION_STYLE_ASSIGNMENT((#275386)); +#275386 = SURFACE_STYLE_USAGE(.BOTH.,#275387); +#275387 = SURFACE_SIDE_STYLE('',(#275388,#275391)); +#275388 = SURFACE_STYLE_FILL_AREA(#275389); +#275389 = FILL_AREA_STYLE('',(#275390)); +#275390 = FILL_AREA_STYLE_COLOUR('',#270350); +#275391 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275392)); +#275392 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275393 = STYLED_ITEM('color',(#275394),#206864); +#275394 = PRESENTATION_STYLE_ASSIGNMENT((#275395)); +#275395 = SURFACE_STYLE_USAGE(.BOTH.,#275396); +#275396 = SURFACE_SIDE_STYLE('',(#275397,#275400)); +#275397 = SURFACE_STYLE_FILL_AREA(#275398); +#275398 = FILL_AREA_STYLE('',(#275399)); +#275399 = FILL_AREA_STYLE_COLOUR('',#270350); +#275400 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275401)); +#275401 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275402 = STYLED_ITEM('color',(#275403),#206999); +#275403 = PRESENTATION_STYLE_ASSIGNMENT((#275404)); +#275404 = SURFACE_STYLE_USAGE(.BOTH.,#275405); +#275405 = SURFACE_SIDE_STYLE('',(#275406,#275409)); +#275406 = SURFACE_STYLE_FILL_AREA(#275407); +#275407 = FILL_AREA_STYLE('',(#275408)); +#275408 = FILL_AREA_STYLE_COLOUR('',#270350); +#275409 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275410)); +#275410 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275411 = STYLED_ITEM('color',(#275412),#207177); +#275412 = PRESENTATION_STYLE_ASSIGNMENT((#275413)); +#275413 = SURFACE_STYLE_USAGE(.BOTH.,#275414); +#275414 = SURFACE_SIDE_STYLE('',(#275415,#275418)); +#275415 = SURFACE_STYLE_FILL_AREA(#275416); +#275416 = FILL_AREA_STYLE('',(#275417)); +#275417 = FILL_AREA_STYLE_COLOUR('',#270350); +#275418 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275419)); +#275419 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275420 = STYLED_ITEM('color',(#275421),#207254); +#275421 = PRESENTATION_STYLE_ASSIGNMENT((#275422)); +#275422 = SURFACE_STYLE_USAGE(.BOTH.,#275423); +#275423 = SURFACE_SIDE_STYLE('',(#275424,#275427)); +#275424 = SURFACE_STYLE_FILL_AREA(#275425); +#275425 = FILL_AREA_STYLE('',(#275426)); +#275426 = FILL_AREA_STYLE_COLOUR('',#270350); +#275427 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275428)); +#275428 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275429 = STYLED_ITEM('color',(#275430),#207438); +#275430 = PRESENTATION_STYLE_ASSIGNMENT((#275431)); +#275431 = SURFACE_STYLE_USAGE(.BOTH.,#275432); +#275432 = SURFACE_SIDE_STYLE('',(#275433,#275436)); +#275433 = SURFACE_STYLE_FILL_AREA(#275434); +#275434 = FILL_AREA_STYLE('',(#275435)); +#275435 = FILL_AREA_STYLE_COLOUR('',#270350); +#275436 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275437)); +#275437 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275438 = STYLED_ITEM('color',(#275439),#207523); +#275439 = PRESENTATION_STYLE_ASSIGNMENT((#275440)); +#275440 = SURFACE_STYLE_USAGE(.BOTH.,#275441); +#275441 = SURFACE_SIDE_STYLE('',(#275442,#275445)); +#275442 = SURFACE_STYLE_FILL_AREA(#275443); +#275443 = FILL_AREA_STYLE('',(#275444)); +#275444 = FILL_AREA_STYLE_COLOUR('',#270350); +#275445 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275446)); +#275446 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275447 = STYLED_ITEM('color',(#275448),#207600); +#275448 = PRESENTATION_STYLE_ASSIGNMENT((#275449)); +#275449 = SURFACE_STYLE_USAGE(.BOTH.,#275450); +#275450 = SURFACE_SIDE_STYLE('',(#275451,#275454)); +#275451 = SURFACE_STYLE_FILL_AREA(#275452); +#275452 = FILL_AREA_STYLE('',(#275453)); +#275453 = FILL_AREA_STYLE_COLOUR('',#270350); +#275454 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275455)); +#275455 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275456 = STYLED_ITEM('color',(#275457),#207677); +#275457 = PRESENTATION_STYLE_ASSIGNMENT((#275458)); +#275458 = SURFACE_STYLE_USAGE(.BOTH.,#275459); +#275459 = SURFACE_SIDE_STYLE('',(#275460,#275463)); +#275460 = SURFACE_STYLE_FILL_AREA(#275461); +#275461 = FILL_AREA_STYLE('',(#275462)); +#275462 = FILL_AREA_STYLE_COLOUR('',#270350); +#275463 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275464)); +#275464 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275465 = STYLED_ITEM('color',(#275466),#207754); +#275466 = PRESENTATION_STYLE_ASSIGNMENT((#275467)); +#275467 = SURFACE_STYLE_USAGE(.BOTH.,#275468); +#275468 = SURFACE_SIDE_STYLE('',(#275469,#275472)); +#275469 = SURFACE_STYLE_FILL_AREA(#275470); +#275470 = FILL_AREA_STYLE('',(#275471)); +#275471 = FILL_AREA_STYLE_COLOUR('',#270350); +#275472 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275473)); +#275473 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275474 = STYLED_ITEM('color',(#275475),#207831); +#275475 = PRESENTATION_STYLE_ASSIGNMENT((#275476)); +#275476 = SURFACE_STYLE_USAGE(.BOTH.,#275477); +#275477 = SURFACE_SIDE_STYLE('',(#275478,#275481)); +#275478 = SURFACE_STYLE_FILL_AREA(#275479); +#275479 = FILL_AREA_STYLE('',(#275480)); +#275480 = FILL_AREA_STYLE_COLOUR('',#270350); +#275481 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275482)); +#275482 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275483 = STYLED_ITEM('color',(#275484),#207916); +#275484 = PRESENTATION_STYLE_ASSIGNMENT((#275485)); +#275485 = SURFACE_STYLE_USAGE(.BOTH.,#275486); +#275486 = SURFACE_SIDE_STYLE('',(#275487,#275490)); +#275487 = SURFACE_STYLE_FILL_AREA(#275488); +#275488 = FILL_AREA_STYLE('',(#275489)); +#275489 = FILL_AREA_STYLE_COLOUR('',#270350); +#275490 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275491)); +#275491 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275492 = STYLED_ITEM('color',(#275493),#208001); +#275493 = PRESENTATION_STYLE_ASSIGNMENT((#275494)); +#275494 = SURFACE_STYLE_USAGE(.BOTH.,#275495); +#275495 = SURFACE_SIDE_STYLE('',(#275496,#275499)); +#275496 = SURFACE_STYLE_FILL_AREA(#275497); +#275497 = FILL_AREA_STYLE('',(#275498)); +#275498 = FILL_AREA_STYLE_COLOUR('',#270350); +#275499 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275500)); +#275500 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275501 = STYLED_ITEM('color',(#275502),#208244); +#275502 = PRESENTATION_STYLE_ASSIGNMENT((#275503)); +#275503 = SURFACE_STYLE_USAGE(.BOTH.,#275504); +#275504 = SURFACE_SIDE_STYLE('',(#275505,#275508)); +#275505 = SURFACE_STYLE_FILL_AREA(#275506); +#275506 = FILL_AREA_STYLE('',(#275507)); +#275507 = FILL_AREA_STYLE_COLOUR('',#270350); +#275508 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275509)); +#275509 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275510 = STYLED_ITEM('color',(#275511),#208347); +#275511 = PRESENTATION_STYLE_ASSIGNMENT((#275512)); +#275512 = SURFACE_STYLE_USAGE(.BOTH.,#275513); +#275513 = SURFACE_SIDE_STYLE('',(#275514,#275517)); +#275514 = SURFACE_STYLE_FILL_AREA(#275515); +#275515 = FILL_AREA_STYLE('',(#275516)); +#275516 = FILL_AREA_STYLE_COLOUR('',#270350); +#275517 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275518)); +#275518 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275519 = STYLED_ITEM('color',(#275520),#208432); +#275520 = PRESENTATION_STYLE_ASSIGNMENT((#275521)); +#275521 = SURFACE_STYLE_USAGE(.BOTH.,#275522); +#275522 = SURFACE_SIDE_STYLE('',(#275523,#275526)); +#275523 = SURFACE_STYLE_FILL_AREA(#275524); +#275524 = FILL_AREA_STYLE('',(#275525)); +#275525 = FILL_AREA_STYLE_COLOUR('',#270350); +#275526 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275527)); +#275527 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275528 = STYLED_ITEM('color',(#275529),#208599); +#275529 = PRESENTATION_STYLE_ASSIGNMENT((#275530)); +#275530 = SURFACE_STYLE_USAGE(.BOTH.,#275531); +#275531 = SURFACE_SIDE_STYLE('',(#275532,#275535)); +#275532 = SURFACE_STYLE_FILL_AREA(#275533); +#275533 = FILL_AREA_STYLE('',(#275534)); +#275534 = FILL_AREA_STYLE_COLOUR('',#270350); +#275535 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275536)); +#275536 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275537 = STYLED_ITEM('color',(#275538),#208793); +#275538 = PRESENTATION_STYLE_ASSIGNMENT((#275539)); +#275539 = SURFACE_STYLE_USAGE(.BOTH.,#275540); +#275540 = SURFACE_SIDE_STYLE('',(#275541,#275544)); +#275541 = SURFACE_STYLE_FILL_AREA(#275542); +#275542 = FILL_AREA_STYLE('',(#275543)); +#275543 = FILL_AREA_STYLE_COLOUR('',#270350); +#275544 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275545)); +#275545 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275546 = STYLED_ITEM('color',(#275547),#208987); +#275547 = PRESENTATION_STYLE_ASSIGNMENT((#275548)); +#275548 = SURFACE_STYLE_USAGE(.BOTH.,#275549); +#275549 = SURFACE_SIDE_STYLE('',(#275550,#275553)); +#275550 = SURFACE_STYLE_FILL_AREA(#275551); +#275551 = FILL_AREA_STYLE('',(#275552)); +#275552 = FILL_AREA_STYLE_COLOUR('',#270350); +#275553 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275554)); +#275554 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275555 = STYLED_ITEM('color',(#275556),#209097); +#275556 = PRESENTATION_STYLE_ASSIGNMENT((#275557)); +#275557 = SURFACE_STYLE_USAGE(.BOTH.,#275558); +#275558 = SURFACE_SIDE_STYLE('',(#275559,#275562)); +#275559 = SURFACE_STYLE_FILL_AREA(#275560); +#275560 = FILL_AREA_STYLE('',(#275561)); +#275561 = FILL_AREA_STYLE_COLOUR('',#270350); +#275562 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275563)); +#275563 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275564 = STYLED_ITEM('color',(#275565),#209232); +#275565 = PRESENTATION_STYLE_ASSIGNMENT((#275566)); +#275566 = SURFACE_STYLE_USAGE(.BOTH.,#275567); +#275567 = SURFACE_SIDE_STYLE('',(#275568,#275571)); +#275568 = SURFACE_STYLE_FILL_AREA(#275569); +#275569 = FILL_AREA_STYLE('',(#275570)); +#275570 = FILL_AREA_STYLE_COLOUR('',#270350); +#275571 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275572)); +#275572 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275573 = STYLED_ITEM('color',(#275574),#209375); +#275574 = PRESENTATION_STYLE_ASSIGNMENT((#275575)); +#275575 = SURFACE_STYLE_USAGE(.BOTH.,#275576); +#275576 = SURFACE_SIDE_STYLE('',(#275577,#275580)); +#275577 = SURFACE_STYLE_FILL_AREA(#275578); +#275578 = FILL_AREA_STYLE('',(#275579)); +#275579 = FILL_AREA_STYLE_COLOUR('',#270350); +#275580 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275581)); +#275581 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275582 = STYLED_ITEM('color',(#275583),#209469); +#275583 = PRESENTATION_STYLE_ASSIGNMENT((#275584)); +#275584 = SURFACE_STYLE_USAGE(.BOTH.,#275585); +#275585 = SURFACE_SIDE_STYLE('',(#275586,#275589)); +#275586 = SURFACE_STYLE_FILL_AREA(#275587); +#275587 = FILL_AREA_STYLE('',(#275588)); +#275588 = FILL_AREA_STYLE_COLOUR('',#270350); +#275589 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275590)); +#275590 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275591 = STYLED_ITEM('color',(#275592),#209562); +#275592 = PRESENTATION_STYLE_ASSIGNMENT((#275593)); +#275593 = SURFACE_STYLE_USAGE(.BOTH.,#275594); +#275594 = SURFACE_SIDE_STYLE('',(#275595,#275598)); +#275595 = SURFACE_STYLE_FILL_AREA(#275596); +#275596 = FILL_AREA_STYLE('',(#275597)); +#275597 = FILL_AREA_STYLE_COLOUR('',#270350); +#275598 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275599)); +#275599 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275600 = STYLED_ITEM('color',(#275601),#209665); +#275601 = PRESENTATION_STYLE_ASSIGNMENT((#275602)); +#275602 = SURFACE_STYLE_USAGE(.BOTH.,#275603); +#275603 = SURFACE_SIDE_STYLE('',(#275604,#275607)); +#275604 = SURFACE_STYLE_FILL_AREA(#275605); +#275605 = FILL_AREA_STYLE('',(#275606)); +#275606 = FILL_AREA_STYLE_COLOUR('',#270350); +#275607 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275608)); +#275608 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275609 = STYLED_ITEM('color',(#275610),#209833); +#275610 = PRESENTATION_STYLE_ASSIGNMENT((#275611)); +#275611 = SURFACE_STYLE_USAGE(.BOTH.,#275612); +#275612 = SURFACE_SIDE_STYLE('',(#275613,#275616)); +#275613 = SURFACE_STYLE_FILL_AREA(#275614); +#275614 = FILL_AREA_STYLE('',(#275615)); +#275615 = FILL_AREA_STYLE_COLOUR('',#270350); +#275616 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275617)); +#275617 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275618 = STYLED_ITEM('color',(#275619),#209943); +#275619 = PRESENTATION_STYLE_ASSIGNMENT((#275620)); +#275620 = SURFACE_STYLE_USAGE(.BOTH.,#275621); +#275621 = SURFACE_SIDE_STYLE('',(#275622,#275625)); +#275622 = SURFACE_STYLE_FILL_AREA(#275623); +#275623 = FILL_AREA_STYLE('',(#275624)); +#275624 = FILL_AREA_STYLE_COLOUR('',#270350); +#275625 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275626)); +#275626 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275627 = STYLED_ITEM('color',(#275628),#210114); +#275628 = PRESENTATION_STYLE_ASSIGNMENT((#275629)); +#275629 = SURFACE_STYLE_USAGE(.BOTH.,#275630); +#275630 = SURFACE_SIDE_STYLE('',(#275631,#275634)); +#275631 = SURFACE_STYLE_FILL_AREA(#275632); +#275632 = FILL_AREA_STYLE('',(#275633)); +#275633 = FILL_AREA_STYLE_COLOUR('',#270350); +#275634 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275635)); +#275635 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275636 = STYLED_ITEM('color',(#275637),#210174); +#275637 = PRESENTATION_STYLE_ASSIGNMENT((#275638)); +#275638 = SURFACE_STYLE_USAGE(.BOTH.,#275639); +#275639 = SURFACE_SIDE_STYLE('',(#275640,#275643)); +#275640 = SURFACE_STYLE_FILL_AREA(#275641); +#275641 = FILL_AREA_STYLE('',(#275642)); +#275642 = FILL_AREA_STYLE_COLOUR('',#270350); +#275643 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275644)); +#275644 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275645 = STYLED_ITEM('color',(#275646),#210368); +#275646 = PRESENTATION_STYLE_ASSIGNMENT((#275647)); +#275647 = SURFACE_STYLE_USAGE(.BOTH.,#275648); +#275648 = SURFACE_SIDE_STYLE('',(#275649,#275652)); +#275649 = SURFACE_STYLE_FILL_AREA(#275650); +#275650 = FILL_AREA_STYLE('',(#275651)); +#275651 = FILL_AREA_STYLE_COLOUR('',#270350); +#275652 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275653)); +#275653 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275654 = STYLED_ITEM('color',(#275655),#210552); +#275655 = PRESENTATION_STYLE_ASSIGNMENT((#275656)); +#275656 = SURFACE_STYLE_USAGE(.BOTH.,#275657); +#275657 = SURFACE_SIDE_STYLE('',(#275658,#275661)); +#275658 = SURFACE_STYLE_FILL_AREA(#275659); +#275659 = FILL_AREA_STYLE('',(#275660)); +#275660 = FILL_AREA_STYLE_COLOUR('',#270350); +#275661 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275662)); +#275662 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275663 = STYLED_ITEM('color',(#275664),#210629); +#275664 = PRESENTATION_STYLE_ASSIGNMENT((#275665)); +#275665 = SURFACE_STYLE_USAGE(.BOTH.,#275666); +#275666 = SURFACE_SIDE_STYLE('',(#275667,#275670)); +#275667 = SURFACE_STYLE_FILL_AREA(#275668); +#275668 = FILL_AREA_STYLE('',(#275669)); +#275669 = FILL_AREA_STYLE_COLOUR('',#270350); +#275670 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275671)); +#275671 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275672 = STYLED_ITEM('color',(#275673),#210741); +#275673 = PRESENTATION_STYLE_ASSIGNMENT((#275674)); +#275674 = SURFACE_STYLE_USAGE(.BOTH.,#275675); +#275675 = SURFACE_SIDE_STYLE('',(#275676,#275679)); +#275676 = SURFACE_STYLE_FILL_AREA(#275677); +#275677 = FILL_AREA_STYLE('',(#275678)); +#275678 = FILL_AREA_STYLE_COLOUR('',#270350); +#275679 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275680)); +#275680 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275681 = STYLED_ITEM('color',(#275682),#210819); +#275682 = PRESENTATION_STYLE_ASSIGNMENT((#275683)); +#275683 = SURFACE_STYLE_USAGE(.BOTH.,#275684); +#275684 = SURFACE_SIDE_STYLE('',(#275685,#275688)); +#275685 = SURFACE_STYLE_FILL_AREA(#275686); +#275686 = FILL_AREA_STYLE('',(#275687)); +#275687 = FILL_AREA_STYLE_COLOUR('',#270350); +#275688 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275689)); +#275689 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275690 = STYLED_ITEM('color',(#275691),#210888); +#275691 = PRESENTATION_STYLE_ASSIGNMENT((#275692)); +#275692 = SURFACE_STYLE_USAGE(.BOTH.,#275693); +#275693 = SURFACE_SIDE_STYLE('',(#275694,#275697)); +#275694 = SURFACE_STYLE_FILL_AREA(#275695); +#275695 = FILL_AREA_STYLE('',(#275696)); +#275696 = FILL_AREA_STYLE_COLOUR('',#270350); +#275697 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275698)); +#275698 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275699 = STYLED_ITEM('color',(#275700),#211029); +#275700 = PRESENTATION_STYLE_ASSIGNMENT((#275701)); +#275701 = SURFACE_STYLE_USAGE(.BOTH.,#275702); +#275702 = SURFACE_SIDE_STYLE('',(#275703,#275706)); +#275703 = SURFACE_STYLE_FILL_AREA(#275704); +#275704 = FILL_AREA_STYLE('',(#275705)); +#275705 = FILL_AREA_STYLE_COLOUR('',#270350); +#275706 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275707)); +#275707 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275708 = STYLED_ITEM('color',(#275709),#211231); +#275709 = PRESENTATION_STYLE_ASSIGNMENT((#275710)); +#275710 = SURFACE_STYLE_USAGE(.BOTH.,#275711); +#275711 = SURFACE_SIDE_STYLE('',(#275712,#275715)); +#275712 = SURFACE_STYLE_FILL_AREA(#275713); +#275713 = FILL_AREA_STYLE('',(#275714)); +#275714 = FILL_AREA_STYLE_COLOUR('',#270350); +#275715 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275716)); +#275716 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275717 = STYLED_ITEM('color',(#275718),#211433); +#275718 = PRESENTATION_STYLE_ASSIGNMENT((#275719)); +#275719 = SURFACE_STYLE_USAGE(.BOTH.,#275720); +#275720 = SURFACE_SIDE_STYLE('',(#275721,#275724)); +#275721 = SURFACE_STYLE_FILL_AREA(#275722); +#275722 = FILL_AREA_STYLE('',(#275723)); +#275723 = FILL_AREA_STYLE_COLOUR('',#270350); +#275724 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275725)); +#275725 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275726 = STYLED_ITEM('color',(#275727),#211576); +#275727 = PRESENTATION_STYLE_ASSIGNMENT((#275728)); +#275728 = SURFACE_STYLE_USAGE(.BOTH.,#275729); +#275729 = SURFACE_SIDE_STYLE('',(#275730,#275733)); +#275730 = SURFACE_STYLE_FILL_AREA(#275731); +#275731 = FILL_AREA_STYLE('',(#275732)); +#275732 = FILL_AREA_STYLE_COLOUR('',#270350); +#275733 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275734)); +#275734 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275735 = STYLED_ITEM('color',(#275736),#211620); +#275736 = PRESENTATION_STYLE_ASSIGNMENT((#275737)); +#275737 = SURFACE_STYLE_USAGE(.BOTH.,#275738); +#275738 = SURFACE_SIDE_STYLE('',(#275739,#275742)); +#275739 = SURFACE_STYLE_FILL_AREA(#275740); +#275740 = FILL_AREA_STYLE('',(#275741)); +#275741 = FILL_AREA_STYLE_COLOUR('',#270350); +#275742 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275743)); +#275743 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275744 = STYLED_ITEM('color',(#275745),#211698); +#275745 = PRESENTATION_STYLE_ASSIGNMENT((#275746)); +#275746 = SURFACE_STYLE_USAGE(.BOTH.,#275747); +#275747 = SURFACE_SIDE_STYLE('',(#275748,#275751)); +#275748 = SURFACE_STYLE_FILL_AREA(#275749); +#275749 = FILL_AREA_STYLE('',(#275750)); +#275750 = FILL_AREA_STYLE_COLOUR('',#270350); +#275751 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275752)); +#275752 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275753 = STYLED_ITEM('color',(#275754),#211767); +#275754 = PRESENTATION_STYLE_ASSIGNMENT((#275755)); +#275755 = SURFACE_STYLE_USAGE(.BOTH.,#275756); +#275756 = SURFACE_SIDE_STYLE('',(#275757,#275760)); +#275757 = SURFACE_STYLE_FILL_AREA(#275758); +#275758 = FILL_AREA_STYLE('',(#275759)); +#275759 = FILL_AREA_STYLE_COLOUR('',#270350); +#275760 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275761)); +#275761 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275762 = STYLED_ITEM('color',(#275763),#211836); +#275763 = PRESENTATION_STYLE_ASSIGNMENT((#275764)); +#275764 = SURFACE_STYLE_USAGE(.BOTH.,#275765); +#275765 = SURFACE_SIDE_STYLE('',(#275766,#275769)); +#275766 = SURFACE_STYLE_FILL_AREA(#275767); +#275767 = FILL_AREA_STYLE('',(#275768)); +#275768 = FILL_AREA_STYLE_COLOUR('',#270350); +#275769 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275770)); +#275770 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275771 = STYLED_ITEM('color',(#275772),#211905); +#275772 = PRESENTATION_STYLE_ASSIGNMENT((#275773)); +#275773 = SURFACE_STYLE_USAGE(.BOTH.,#275774); +#275774 = SURFACE_SIDE_STYLE('',(#275775,#275778)); +#275775 = SURFACE_STYLE_FILL_AREA(#275776); +#275776 = FILL_AREA_STYLE('',(#275777)); +#275777 = FILL_AREA_STYLE_COLOUR('',#270350); +#275778 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275779)); +#275779 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275780 = STYLED_ITEM('color',(#275781),#212088); +#275781 = PRESENTATION_STYLE_ASSIGNMENT((#275782)); +#275782 = SURFACE_STYLE_USAGE(.BOTH.,#275783); +#275783 = SURFACE_SIDE_STYLE('',(#275784,#275787)); +#275784 = SURFACE_STYLE_FILL_AREA(#275785); +#275785 = FILL_AREA_STYLE('',(#275786)); +#275786 = FILL_AREA_STYLE_COLOUR('',#270350); +#275787 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275788)); +#275788 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275789 = STYLED_ITEM('color',(#275790),#212132); +#275790 = PRESENTATION_STYLE_ASSIGNMENT((#275791)); +#275791 = SURFACE_STYLE_USAGE(.BOTH.,#275792); +#275792 = SURFACE_SIDE_STYLE('',(#275793,#275796)); +#275793 = SURFACE_STYLE_FILL_AREA(#275794); +#275794 = FILL_AREA_STYLE('',(#275795)); +#275795 = FILL_AREA_STYLE_COLOUR('',#270350); +#275796 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275797)); +#275797 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275798 = STYLED_ITEM('color',(#275799),#212209); +#275799 = PRESENTATION_STYLE_ASSIGNMENT((#275800)); +#275800 = SURFACE_STYLE_USAGE(.BOTH.,#275801); +#275801 = SURFACE_SIDE_STYLE('',(#275802,#275805)); +#275802 = SURFACE_STYLE_FILL_AREA(#275803); +#275803 = FILL_AREA_STYLE('',(#275804)); +#275804 = FILL_AREA_STYLE_COLOUR('',#270350); +#275805 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275806)); +#275806 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275807 = STYLED_ITEM('color',(#275808),#212449); +#275808 = PRESENTATION_STYLE_ASSIGNMENT((#275809)); +#275809 = SURFACE_STYLE_USAGE(.BOTH.,#275810); +#275810 = SURFACE_SIDE_STYLE('',(#275811,#275814)); +#275811 = SURFACE_STYLE_FILL_AREA(#275812); +#275812 = FILL_AREA_STYLE('',(#275813)); +#275813 = FILL_AREA_STYLE_COLOUR('',#270350); +#275814 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275815)); +#275815 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275816 = STYLED_ITEM('color',(#275817),#212897); +#275817 = PRESENTATION_STYLE_ASSIGNMENT((#275818)); +#275818 = SURFACE_STYLE_USAGE(.BOTH.,#275819); +#275819 = SURFACE_SIDE_STYLE('',(#275820,#275823)); +#275820 = SURFACE_STYLE_FILL_AREA(#275821); +#275821 = FILL_AREA_STYLE('',(#275822)); +#275822 = FILL_AREA_STYLE_COLOUR('',#270350); +#275823 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275824)); +#275824 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275825 = STYLED_ITEM('color',(#275826),#212991); +#275826 = PRESENTATION_STYLE_ASSIGNMENT((#275827)); +#275827 = SURFACE_STYLE_USAGE(.BOTH.,#275828); +#275828 = SURFACE_SIDE_STYLE('',(#275829,#275832)); +#275829 = SURFACE_STYLE_FILL_AREA(#275830); +#275830 = FILL_AREA_STYLE('',(#275831)); +#275831 = FILL_AREA_STYLE_COLOUR('',#270350); +#275832 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275833)); +#275833 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275834 = STYLED_ITEM('color',(#275835),#213085); +#275835 = PRESENTATION_STYLE_ASSIGNMENT((#275836)); +#275836 = SURFACE_STYLE_USAGE(.BOTH.,#275837); +#275837 = SURFACE_SIDE_STYLE('',(#275838,#275841)); +#275838 = SURFACE_STYLE_FILL_AREA(#275839); +#275839 = FILL_AREA_STYLE('',(#275840)); +#275840 = FILL_AREA_STYLE_COLOUR('',#270350); +#275841 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275842)); +#275842 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275843 = STYLED_ITEM('color',(#275844),#213154); +#275844 = PRESENTATION_STYLE_ASSIGNMENT((#275845)); +#275845 = SURFACE_STYLE_USAGE(.BOTH.,#275846); +#275846 = SURFACE_SIDE_STYLE('',(#275847,#275850)); +#275847 = SURFACE_STYLE_FILL_AREA(#275848); +#275848 = FILL_AREA_STYLE('',(#275849)); +#275849 = FILL_AREA_STYLE_COLOUR('',#270350); +#275850 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275851)); +#275851 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275852 = STYLED_ITEM('color',(#275853),#213467); +#275853 = PRESENTATION_STYLE_ASSIGNMENT((#275854)); +#275854 = SURFACE_STYLE_USAGE(.BOTH.,#275855); +#275855 = SURFACE_SIDE_STYLE('',(#275856,#275859)); +#275856 = SURFACE_STYLE_FILL_AREA(#275857); +#275857 = FILL_AREA_STYLE('',(#275858)); +#275858 = FILL_AREA_STYLE_COLOUR('',#270350); +#275859 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275860)); +#275860 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275861 = STYLED_ITEM('color',(#275862),#213695); +#275862 = PRESENTATION_STYLE_ASSIGNMENT((#275863)); +#275863 = SURFACE_STYLE_USAGE(.BOTH.,#275864); +#275864 = SURFACE_SIDE_STYLE('',(#275865,#275868)); +#275865 = SURFACE_STYLE_FILL_AREA(#275866); +#275866 = FILL_AREA_STYLE('',(#275867)); +#275867 = FILL_AREA_STYLE_COLOUR('',#270350); +#275868 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275869)); +#275869 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275870 = STYLED_ITEM('color',(#275871),#213866); +#275871 = PRESENTATION_STYLE_ASSIGNMENT((#275872)); +#275872 = SURFACE_STYLE_USAGE(.BOTH.,#275873); +#275873 = SURFACE_SIDE_STYLE('',(#275874,#275877)); +#275874 = SURFACE_STYLE_FILL_AREA(#275875); +#275875 = FILL_AREA_STYLE('',(#275876)); +#275876 = FILL_AREA_STYLE_COLOUR('',#270350); +#275877 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275878)); +#275878 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275879 = STYLED_ITEM('color',(#275880),#213926); +#275880 = PRESENTATION_STYLE_ASSIGNMENT((#275881)); +#275881 = SURFACE_STYLE_USAGE(.BOTH.,#275882); +#275882 = SURFACE_SIDE_STYLE('',(#275883,#275886)); +#275883 = SURFACE_STYLE_FILL_AREA(#275884); +#275884 = FILL_AREA_STYLE('',(#275885)); +#275885 = FILL_AREA_STYLE_COLOUR('',#270350); +#275886 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275887)); +#275887 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275888 = STYLED_ITEM('color',(#275889),#214059); +#275889 = PRESENTATION_STYLE_ASSIGNMENT((#275890)); +#275890 = SURFACE_STYLE_USAGE(.BOTH.,#275891); +#275891 = SURFACE_SIDE_STYLE('',(#275892,#275895)); +#275892 = SURFACE_STYLE_FILL_AREA(#275893); +#275893 = FILL_AREA_STYLE('',(#275894)); +#275894 = FILL_AREA_STYLE_COLOUR('',#270350); +#275895 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275896)); +#275896 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275897 = STYLED_ITEM('color',(#275898),#214237); +#275898 = PRESENTATION_STYLE_ASSIGNMENT((#275899)); +#275899 = SURFACE_STYLE_USAGE(.BOTH.,#275900); +#275900 = SURFACE_SIDE_STYLE('',(#275901,#275904)); +#275901 = SURFACE_STYLE_FILL_AREA(#275902); +#275902 = FILL_AREA_STYLE('',(#275903)); +#275903 = FILL_AREA_STYLE_COLOUR('',#270350); +#275904 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275905)); +#275905 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275906 = STYLED_ITEM('color',(#275907),#214355); +#275907 = PRESENTATION_STYLE_ASSIGNMENT((#275908)); +#275908 = SURFACE_STYLE_USAGE(.BOTH.,#275909); +#275909 = SURFACE_SIDE_STYLE('',(#275910,#275913)); +#275910 = SURFACE_STYLE_FILL_AREA(#275911); +#275911 = FILL_AREA_STYLE('',(#275912)); +#275912 = FILL_AREA_STYLE_COLOUR('',#270350); +#275913 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275914)); +#275914 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275915 = STYLED_ITEM('color',(#275916),#214507); +#275916 = PRESENTATION_STYLE_ASSIGNMENT((#275917)); +#275917 = SURFACE_STYLE_USAGE(.BOTH.,#275918); +#275918 = SURFACE_SIDE_STYLE('',(#275919,#275922)); +#275919 = SURFACE_STYLE_FILL_AREA(#275920); +#275920 = FILL_AREA_STYLE('',(#275921)); +#275921 = FILL_AREA_STYLE_COLOUR('',#270350); +#275922 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275923)); +#275923 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275924 = STYLED_ITEM('color',(#275925),#214585); +#275925 = PRESENTATION_STYLE_ASSIGNMENT((#275926)); +#275926 = SURFACE_STYLE_USAGE(.BOTH.,#275927); +#275927 = SURFACE_SIDE_STYLE('',(#275928,#275931)); +#275928 = SURFACE_STYLE_FILL_AREA(#275929); +#275929 = FILL_AREA_STYLE('',(#275930)); +#275930 = FILL_AREA_STYLE_COLOUR('',#270350); +#275931 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275932)); +#275932 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275933 = STYLED_ITEM('color',(#275934),#214629); +#275934 = PRESENTATION_STYLE_ASSIGNMENT((#275935)); +#275935 = SURFACE_STYLE_USAGE(.BOTH.,#275936); +#275936 = SURFACE_SIDE_STYLE('',(#275937,#275940)); +#275937 = SURFACE_STYLE_FILL_AREA(#275938); +#275938 = FILL_AREA_STYLE('',(#275939)); +#275939 = FILL_AREA_STYLE_COLOUR('',#270350); +#275940 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275941)); +#275941 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275942 = STYLED_ITEM('color',(#275943),#214780); +#275943 = PRESENTATION_STYLE_ASSIGNMENT((#275944)); +#275944 = SURFACE_STYLE_USAGE(.BOTH.,#275945); +#275945 = SURFACE_SIDE_STYLE('',(#275946,#275949)); +#275946 = SURFACE_STYLE_FILL_AREA(#275947); +#275947 = FILL_AREA_STYLE('',(#275948)); +#275948 = FILL_AREA_STYLE_COLOUR('',#270350); +#275949 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275950)); +#275950 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275951 = STYLED_ITEM('color',(#275952),#214832); +#275952 = PRESENTATION_STYLE_ASSIGNMENT((#275953)); +#275953 = SURFACE_STYLE_USAGE(.BOTH.,#275954); +#275954 = SURFACE_SIDE_STYLE('',(#275955,#275958)); +#275955 = SURFACE_STYLE_FILL_AREA(#275956); +#275956 = FILL_AREA_STYLE('',(#275957)); +#275957 = FILL_AREA_STYLE_COLOUR('',#270350); +#275958 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275959)); +#275959 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275960 = STYLED_ITEM('color',(#275961),#214884); +#275961 = PRESENTATION_STYLE_ASSIGNMENT((#275962)); +#275962 = SURFACE_STYLE_USAGE(.BOTH.,#275963); +#275963 = SURFACE_SIDE_STYLE('',(#275964,#275967)); +#275964 = SURFACE_STYLE_FILL_AREA(#275965); +#275965 = FILL_AREA_STYLE('',(#275966)); +#275966 = FILL_AREA_STYLE_COLOUR('',#270350); +#275967 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275968)); +#275968 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275969 = STYLED_ITEM('color',(#275970),#215167); +#275970 = PRESENTATION_STYLE_ASSIGNMENT((#275971)); +#275971 = SURFACE_STYLE_USAGE(.BOTH.,#275972); +#275972 = SURFACE_SIDE_STYLE('',(#275973,#275976)); +#275973 = SURFACE_STYLE_FILL_AREA(#275974); +#275974 = FILL_AREA_STYLE('',(#275975)); +#275975 = FILL_AREA_STYLE_COLOUR('',#270350); +#275976 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275977)); +#275977 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275978 = STYLED_ITEM('color',(#275979),#215211); +#275979 = PRESENTATION_STYLE_ASSIGNMENT((#275980)); +#275980 = SURFACE_STYLE_USAGE(.BOTH.,#275981); +#275981 = SURFACE_SIDE_STYLE('',(#275982,#275985)); +#275982 = SURFACE_STYLE_FILL_AREA(#275983); +#275983 = FILL_AREA_STYLE('',(#275984)); +#275984 = FILL_AREA_STYLE_COLOUR('',#270350); +#275985 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275986)); +#275986 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275987 = STYLED_ITEM('color',(#275988),#215423); +#275988 = PRESENTATION_STYLE_ASSIGNMENT((#275989)); +#275989 = SURFACE_STYLE_USAGE(.BOTH.,#275990); +#275990 = SURFACE_SIDE_STYLE('',(#275991,#275994)); +#275991 = SURFACE_STYLE_FILL_AREA(#275992); +#275992 = FILL_AREA_STYLE('',(#275993)); +#275993 = FILL_AREA_STYLE_COLOUR('',#270350); +#275994 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#275995)); +#275995 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275996 = STYLED_ITEM('color',(#275997),#215565); +#275997 = PRESENTATION_STYLE_ASSIGNMENT((#275998)); +#275998 = SURFACE_STYLE_USAGE(.BOTH.,#275999); +#275999 = SURFACE_SIDE_STYLE('',(#276000,#276003)); +#276000 = SURFACE_STYLE_FILL_AREA(#276001); +#276001 = FILL_AREA_STYLE('',(#276002)); +#276002 = FILL_AREA_STYLE_COLOUR('',#270350); +#276003 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276004)); +#276004 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276005 = STYLED_ITEM('color',(#276006),#215758); +#276006 = PRESENTATION_STYLE_ASSIGNMENT((#276007)); +#276007 = SURFACE_STYLE_USAGE(.BOTH.,#276008); +#276008 = SURFACE_SIDE_STYLE('',(#276009,#276012)); +#276009 = SURFACE_STYLE_FILL_AREA(#276010); +#276010 = FILL_AREA_STYLE('',(#276011)); +#276011 = FILL_AREA_STYLE_COLOUR('',#270350); +#276012 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276013)); +#276013 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276014 = STYLED_ITEM('color',(#276015),#215970); +#276015 = PRESENTATION_STYLE_ASSIGNMENT((#276016)); +#276016 = SURFACE_STYLE_USAGE(.BOTH.,#276017); +#276017 = SURFACE_SIDE_STYLE('',(#276018,#276021)); +#276018 = SURFACE_STYLE_FILL_AREA(#276019); +#276019 = FILL_AREA_STYLE('',(#276020)); +#276020 = FILL_AREA_STYLE_COLOUR('',#270350); +#276021 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276022)); +#276022 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276023 = STYLED_ITEM('color',(#276024),#216120); +#276024 = PRESENTATION_STYLE_ASSIGNMENT((#276025)); +#276025 = SURFACE_STYLE_USAGE(.BOTH.,#276026); +#276026 = SURFACE_SIDE_STYLE('',(#276027,#276030)); +#276027 = SURFACE_STYLE_FILL_AREA(#276028); +#276028 = FILL_AREA_STYLE('',(#276029)); +#276029 = FILL_AREA_STYLE_COLOUR('',#270350); +#276030 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276031)); +#276031 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276032 = STYLED_ITEM('color',(#276033),#216187); +#276033 = PRESENTATION_STYLE_ASSIGNMENT((#276034)); +#276034 = SURFACE_STYLE_USAGE(.BOTH.,#276035); +#276035 = SURFACE_SIDE_STYLE('',(#276036,#276039)); +#276036 = SURFACE_STYLE_FILL_AREA(#276037); +#276037 = FILL_AREA_STYLE('',(#276038)); +#276038 = FILL_AREA_STYLE_COLOUR('',#270350); +#276039 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276040)); +#276040 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276041 = STYLED_ITEM('color',(#276042),#216457); +#276042 = PRESENTATION_STYLE_ASSIGNMENT((#276043)); +#276043 = SURFACE_STYLE_USAGE(.BOTH.,#276044); +#276044 = SURFACE_SIDE_STYLE('',(#276045,#276048)); +#276045 = SURFACE_STYLE_FILL_AREA(#276046); +#276046 = FILL_AREA_STYLE('',(#276047)); +#276047 = FILL_AREA_STYLE_COLOUR('',#270350); +#276048 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276049)); +#276049 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276050 = STYLED_ITEM('color',(#276051),#216569); +#276051 = PRESENTATION_STYLE_ASSIGNMENT((#276052)); +#276052 = SURFACE_STYLE_USAGE(.BOTH.,#276053); +#276053 = SURFACE_SIDE_STYLE('',(#276054,#276057)); +#276054 = SURFACE_STYLE_FILL_AREA(#276055); +#276055 = FILL_AREA_STYLE('',(#276056)); +#276056 = FILL_AREA_STYLE_COLOUR('',#270350); +#276057 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276058)); +#276058 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276059 = STYLED_ITEM('color',(#276060),#216753); +#276060 = PRESENTATION_STYLE_ASSIGNMENT((#276061)); +#276061 = SURFACE_STYLE_USAGE(.BOTH.,#276062); +#276062 = SURFACE_SIDE_STYLE('',(#276063,#276066)); +#276063 = SURFACE_STYLE_FILL_AREA(#276064); +#276064 = FILL_AREA_STYLE('',(#276065)); +#276065 = FILL_AREA_STYLE_COLOUR('',#270350); +#276066 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276067)); +#276067 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276068 = STYLED_ITEM('color',(#276069),#217111); +#276069 = PRESENTATION_STYLE_ASSIGNMENT((#276070)); +#276070 = SURFACE_STYLE_USAGE(.BOTH.,#276071); +#276071 = SURFACE_SIDE_STYLE('',(#276072,#276075)); +#276072 = SURFACE_STYLE_FILL_AREA(#276073); +#276073 = FILL_AREA_STYLE('',(#276074)); +#276074 = FILL_AREA_STYLE_COLOUR('',#270350); +#276075 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276076)); +#276076 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276077 = STYLED_ITEM('color',(#276078),#217383); +#276078 = PRESENTATION_STYLE_ASSIGNMENT((#276079)); +#276079 = SURFACE_STYLE_USAGE(.BOTH.,#276080); +#276080 = SURFACE_SIDE_STYLE('',(#276081,#276084)); +#276081 = SURFACE_STYLE_FILL_AREA(#276082); +#276082 = FILL_AREA_STYLE('',(#276083)); +#276083 = FILL_AREA_STYLE_COLOUR('',#270350); +#276084 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276085)); +#276085 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276086 = STYLED_ITEM('color',(#276087),#217706); +#276087 = PRESENTATION_STYLE_ASSIGNMENT((#276088)); +#276088 = SURFACE_STYLE_USAGE(.BOTH.,#276089); +#276089 = SURFACE_SIDE_STYLE('',(#276090,#276093)); +#276090 = SURFACE_STYLE_FILL_AREA(#276091); +#276091 = FILL_AREA_STYLE('',(#276092)); +#276092 = FILL_AREA_STYLE_COLOUR('',#270350); +#276093 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276094)); +#276094 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276095 = STYLED_ITEM('color',(#276096),#217832); +#276096 = PRESENTATION_STYLE_ASSIGNMENT((#276097)); +#276097 = SURFACE_STYLE_USAGE(.BOTH.,#276098); +#276098 = SURFACE_SIDE_STYLE('',(#276099,#276102)); +#276099 = SURFACE_STYLE_FILL_AREA(#276100); +#276100 = FILL_AREA_STYLE('',(#276101)); +#276101 = FILL_AREA_STYLE_COLOUR('',#270350); +#276102 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276103)); +#276103 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276104 = STYLED_ITEM('color',(#276105),#217967); +#276105 = PRESENTATION_STYLE_ASSIGNMENT((#276106)); +#276106 = SURFACE_STYLE_USAGE(.BOTH.,#276107); +#276107 = SURFACE_SIDE_STYLE('',(#276108,#276111)); +#276108 = SURFACE_STYLE_FILL_AREA(#276109); +#276109 = FILL_AREA_STYLE('',(#276110)); +#276110 = FILL_AREA_STYLE_COLOUR('',#270350); +#276111 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276112)); +#276112 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276113 = STYLED_ITEM('color',(#276114),#218222); +#276114 = PRESENTATION_STYLE_ASSIGNMENT((#276115)); +#276115 = SURFACE_STYLE_USAGE(.BOTH.,#276116); +#276116 = SURFACE_SIDE_STYLE('',(#276117,#276120)); +#276117 = SURFACE_STYLE_FILL_AREA(#276118); +#276118 = FILL_AREA_STYLE('',(#276119)); +#276119 = FILL_AREA_STYLE_COLOUR('',#270350); +#276120 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276121)); +#276121 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276122 = STYLED_ITEM('color',(#276123),#218299); +#276123 = PRESENTATION_STYLE_ASSIGNMENT((#276124)); +#276124 = SURFACE_STYLE_USAGE(.BOTH.,#276125); +#276125 = SURFACE_SIDE_STYLE('',(#276126,#276129)); +#276126 = SURFACE_STYLE_FILL_AREA(#276127); +#276127 = FILL_AREA_STYLE('',(#276128)); +#276128 = FILL_AREA_STYLE_COLOUR('',#270350); +#276129 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276130)); +#276130 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276131 = STYLED_ITEM('color',(#276132),#218450); +#276132 = PRESENTATION_STYLE_ASSIGNMENT((#276133)); +#276133 = SURFACE_STYLE_USAGE(.BOTH.,#276134); +#276134 = SURFACE_SIDE_STYLE('',(#276135,#276138)); +#276135 = SURFACE_STYLE_FILL_AREA(#276136); +#276136 = FILL_AREA_STYLE('',(#276137)); +#276137 = FILL_AREA_STYLE_COLOUR('',#270350); +#276138 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276139)); +#276139 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276140 = STYLED_ITEM('color',(#276141),#218664); +#276141 = PRESENTATION_STYLE_ASSIGNMENT((#276142)); +#276142 = SURFACE_STYLE_USAGE(.BOTH.,#276143); +#276143 = SURFACE_SIDE_STYLE('',(#276144,#276147)); +#276144 = SURFACE_STYLE_FILL_AREA(#276145); +#276145 = FILL_AREA_STYLE('',(#276146)); +#276146 = FILL_AREA_STYLE_COLOUR('',#270350); +#276147 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276148)); +#276148 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276149 = STYLED_ITEM('color',(#276150),#218766); +#276150 = PRESENTATION_STYLE_ASSIGNMENT((#276151)); +#276151 = SURFACE_STYLE_USAGE(.BOTH.,#276152); +#276152 = SURFACE_SIDE_STYLE('',(#276153,#276156)); +#276153 = SURFACE_STYLE_FILL_AREA(#276154); +#276154 = FILL_AREA_STYLE('',(#276155)); +#276155 = FILL_AREA_STYLE_COLOUR('',#270350); +#276156 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276157)); +#276157 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276158 = STYLED_ITEM('color',(#276159),#218909); +#276159 = PRESENTATION_STYLE_ASSIGNMENT((#276160)); +#276160 = SURFACE_STYLE_USAGE(.BOTH.,#276161); +#276161 = SURFACE_SIDE_STYLE('',(#276162,#276165)); +#276162 = SURFACE_STYLE_FILL_AREA(#276163); +#276163 = FILL_AREA_STYLE('',(#276164)); +#276164 = FILL_AREA_STYLE_COLOUR('',#270350); +#276165 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276166)); +#276166 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276167 = STYLED_ITEM('color',(#276168),#219067); +#276168 = PRESENTATION_STYLE_ASSIGNMENT((#276169)); +#276169 = SURFACE_STYLE_USAGE(.BOTH.,#276170); +#276170 = SURFACE_SIDE_STYLE('',(#276171,#276174)); +#276171 = SURFACE_STYLE_FILL_AREA(#276172); +#276172 = FILL_AREA_STYLE('',(#276173)); +#276173 = FILL_AREA_STYLE_COLOUR('',#270350); +#276174 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276175)); +#276175 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276176 = STYLED_ITEM('color',(#276177),#219225); +#276177 = PRESENTATION_STYLE_ASSIGNMENT((#276178)); +#276178 = SURFACE_STYLE_USAGE(.BOTH.,#276179); +#276179 = SURFACE_SIDE_STYLE('',(#276180,#276183)); +#276180 = SURFACE_STYLE_FILL_AREA(#276181); +#276181 = FILL_AREA_STYLE('',(#276182)); +#276182 = FILL_AREA_STYLE_COLOUR('',#270350); +#276183 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276184)); +#276184 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276185 = STYLED_ITEM('color',(#276186),#219310); +#276186 = PRESENTATION_STYLE_ASSIGNMENT((#276187)); +#276187 = SURFACE_STYLE_USAGE(.BOTH.,#276188); +#276188 = SURFACE_SIDE_STYLE('',(#276189,#276192)); +#276189 = SURFACE_STYLE_FILL_AREA(#276190); +#276190 = FILL_AREA_STYLE('',(#276191)); +#276191 = FILL_AREA_STYLE_COLOUR('',#270350); +#276192 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276193)); +#276193 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276194 = STYLED_ITEM('color',(#276195),#219510); +#276195 = PRESENTATION_STYLE_ASSIGNMENT((#276196)); +#276196 = SURFACE_STYLE_USAGE(.BOTH.,#276197); +#276197 = SURFACE_SIDE_STYLE('',(#276198,#276201)); +#276198 = SURFACE_STYLE_FILL_AREA(#276199); +#276199 = FILL_AREA_STYLE('',(#276200)); +#276200 = FILL_AREA_STYLE_COLOUR('',#270350); +#276201 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276202)); +#276202 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276203 = STYLED_ITEM('color',(#276204),#219570); +#276204 = PRESENTATION_STYLE_ASSIGNMENT((#276205)); +#276205 = SURFACE_STYLE_USAGE(.BOTH.,#276206); +#276206 = SURFACE_SIDE_STYLE('',(#276207,#276210)); +#276207 = SURFACE_STYLE_FILL_AREA(#276208); +#276208 = FILL_AREA_STYLE('',(#276209)); +#276209 = FILL_AREA_STYLE_COLOUR('',#270350); +#276210 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276211)); +#276211 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276212 = STYLED_ITEM('color',(#276213),#219655); +#276213 = PRESENTATION_STYLE_ASSIGNMENT((#276214)); +#276214 = SURFACE_STYLE_USAGE(.BOTH.,#276215); +#276215 = SURFACE_SIDE_STYLE('',(#276216,#276219)); +#276216 = SURFACE_STYLE_FILL_AREA(#276217); +#276217 = FILL_AREA_STYLE('',(#276218)); +#276218 = FILL_AREA_STYLE_COLOUR('',#270350); +#276219 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276220)); +#276220 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276221 = STYLED_ITEM('color',(#276222),#219740); +#276222 = PRESENTATION_STYLE_ASSIGNMENT((#276223)); +#276223 = SURFACE_STYLE_USAGE(.BOTH.,#276224); +#276224 = SURFACE_SIDE_STYLE('',(#276225,#276228)); +#276225 = SURFACE_STYLE_FILL_AREA(#276226); +#276226 = FILL_AREA_STYLE('',(#276227)); +#276227 = FILL_AREA_STYLE_COLOUR('',#270350); +#276228 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276229)); +#276229 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276230 = STYLED_ITEM('color',(#276231),#219948); +#276231 = PRESENTATION_STYLE_ASSIGNMENT((#276232)); +#276232 = SURFACE_STYLE_USAGE(.BOTH.,#276233); +#276233 = SURFACE_SIDE_STYLE('',(#276234,#276237)); +#276234 = SURFACE_STYLE_FILL_AREA(#276235); +#276235 = FILL_AREA_STYLE('',(#276236)); +#276236 = FILL_AREA_STYLE_COLOUR('',#270350); +#276237 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276238)); +#276238 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276239 = STYLED_ITEM('color',(#276240),#219992); +#276240 = PRESENTATION_STYLE_ASSIGNMENT((#276241)); +#276241 = SURFACE_STYLE_USAGE(.BOTH.,#276242); +#276242 = SURFACE_SIDE_STYLE('',(#276243,#276246)); +#276243 = SURFACE_STYLE_FILL_AREA(#276244); +#276244 = FILL_AREA_STYLE('',(#276245)); +#276245 = FILL_AREA_STYLE_COLOUR('',#270350); +#276246 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276247)); +#276247 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276248 = STYLED_ITEM('color',(#276249),#220102); +#276249 = PRESENTATION_STYLE_ASSIGNMENT((#276250)); +#276250 = SURFACE_STYLE_USAGE(.BOTH.,#276251); +#276251 = SURFACE_SIDE_STYLE('',(#276252,#276255)); +#276252 = SURFACE_STYLE_FILL_AREA(#276253); +#276253 = FILL_AREA_STYLE('',(#276254)); +#276254 = FILL_AREA_STYLE_COLOUR('',#270350); +#276255 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276256)); +#276256 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276257 = STYLED_ITEM('color',(#276258),#220204); +#276258 = PRESENTATION_STYLE_ASSIGNMENT((#276259)); +#276259 = SURFACE_STYLE_USAGE(.BOTH.,#276260); +#276260 = SURFACE_SIDE_STYLE('',(#276261,#276264)); +#276261 = SURFACE_STYLE_FILL_AREA(#276262); +#276262 = FILL_AREA_STYLE('',(#276263)); +#276263 = FILL_AREA_STYLE_COLOUR('',#270350); +#276264 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276265)); +#276265 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276266 = STYLED_ITEM('color',(#276267),#220281); +#276267 = PRESENTATION_STYLE_ASSIGNMENT((#276268)); +#276268 = SURFACE_STYLE_USAGE(.BOTH.,#276269); +#276269 = SURFACE_SIDE_STYLE('',(#276270,#276273)); +#276270 = SURFACE_STYLE_FILL_AREA(#276271); +#276271 = FILL_AREA_STYLE('',(#276272)); +#276272 = FILL_AREA_STYLE_COLOUR('',#270350); +#276273 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276274)); +#276274 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276275 = STYLED_ITEM('color',(#276276),#220729); +#276276 = PRESENTATION_STYLE_ASSIGNMENT((#276277)); +#276277 = SURFACE_STYLE_USAGE(.BOTH.,#276278); +#276278 = SURFACE_SIDE_STYLE('',(#276279,#276282)); +#276279 = SURFACE_STYLE_FILL_AREA(#276280); +#276280 = FILL_AREA_STYLE('',(#276281)); +#276281 = FILL_AREA_STYLE_COLOUR('',#270350); +#276282 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276283)); +#276283 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276284 = STYLED_ITEM('color',(#276285),#220773); +#276285 = PRESENTATION_STYLE_ASSIGNMENT((#276286)); +#276286 = SURFACE_STYLE_USAGE(.BOTH.,#276287); +#276287 = SURFACE_SIDE_STYLE('',(#276288,#276291)); +#276288 = SURFACE_STYLE_FILL_AREA(#276289); +#276289 = FILL_AREA_STYLE('',(#276290)); +#276290 = FILL_AREA_STYLE_COLOUR('',#270350); +#276291 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276292)); +#276292 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276293 = STYLED_ITEM('color',(#276294),#220980); +#276294 = PRESENTATION_STYLE_ASSIGNMENT((#276295)); +#276295 = SURFACE_STYLE_USAGE(.BOTH.,#276296); +#276296 = SURFACE_SIDE_STYLE('',(#276297,#276300)); +#276297 = SURFACE_STYLE_FILL_AREA(#276298); +#276298 = FILL_AREA_STYLE('',(#276299)); +#276299 = FILL_AREA_STYLE_COLOUR('',#270350); +#276300 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276301)); +#276301 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276302 = STYLED_ITEM('color',(#276303),#221201); +#276303 = PRESENTATION_STYLE_ASSIGNMENT((#276304)); +#276304 = SURFACE_STYLE_USAGE(.BOTH.,#276305); +#276305 = SURFACE_SIDE_STYLE('',(#276306,#276309)); +#276306 = SURFACE_STYLE_FILL_AREA(#276307); +#276307 = FILL_AREA_STYLE('',(#276308)); +#276308 = FILL_AREA_STYLE_COLOUR('',#270350); +#276309 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276310)); +#276310 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276311 = STYLED_ITEM('color',(#276312),#221295); +#276312 = PRESENTATION_STYLE_ASSIGNMENT((#276313)); +#276313 = SURFACE_STYLE_USAGE(.BOTH.,#276314); +#276314 = SURFACE_SIDE_STYLE('',(#276315,#276318)); +#276315 = SURFACE_STYLE_FILL_AREA(#276316); +#276316 = FILL_AREA_STYLE('',(#276317)); +#276317 = FILL_AREA_STYLE_COLOUR('',#270350); +#276318 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276319)); +#276319 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276320 = STYLED_ITEM('color',(#276321),#221625); +#276321 = PRESENTATION_STYLE_ASSIGNMENT((#276322)); +#276322 = SURFACE_STYLE_USAGE(.BOTH.,#276323); +#276323 = SURFACE_SIDE_STYLE('',(#276324,#276327)); +#276324 = SURFACE_STYLE_FILL_AREA(#276325); +#276325 = FILL_AREA_STYLE('',(#276326)); +#276326 = FILL_AREA_STYLE_COLOUR('',#270350); +#276327 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276328)); +#276328 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276329 = STYLED_ITEM('color',(#276330),#221767); +#276330 = PRESENTATION_STYLE_ASSIGNMENT((#276331)); +#276331 = SURFACE_STYLE_USAGE(.BOTH.,#276332); +#276332 = SURFACE_SIDE_STYLE('',(#276333,#276336)); +#276333 = SURFACE_STYLE_FILL_AREA(#276334); +#276334 = FILL_AREA_STYLE('',(#276335)); +#276335 = FILL_AREA_STYLE_COLOUR('',#270350); +#276336 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276337)); +#276337 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276338 = STYLED_ITEM('color',(#276339),#221938); +#276339 = PRESENTATION_STYLE_ASSIGNMENT((#276340)); +#276340 = SURFACE_STYLE_USAGE(.BOTH.,#276341); +#276341 = SURFACE_SIDE_STYLE('',(#276342,#276345)); +#276342 = SURFACE_STYLE_FILL_AREA(#276343); +#276343 = FILL_AREA_STYLE('',(#276344)); +#276344 = FILL_AREA_STYLE_COLOUR('',#270350); +#276345 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276346)); +#276346 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276347 = STYLED_ITEM('color',(#276348),#222081); +#276348 = PRESENTATION_STYLE_ASSIGNMENT((#276349)); +#276349 = SURFACE_STYLE_USAGE(.BOTH.,#276350); +#276350 = SURFACE_SIDE_STYLE('',(#276351,#276354)); +#276351 = SURFACE_STYLE_FILL_AREA(#276352); +#276352 = FILL_AREA_STYLE('',(#276353)); +#276353 = FILL_AREA_STYLE_COLOUR('',#270350); +#276354 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276355)); +#276355 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276356 = STYLED_ITEM('color',(#276357),#222223); +#276357 = PRESENTATION_STYLE_ASSIGNMENT((#276358)); +#276358 = SURFACE_STYLE_USAGE(.BOTH.,#276359); +#276359 = SURFACE_SIDE_STYLE('',(#276360,#276363)); +#276360 = SURFACE_STYLE_FILL_AREA(#276361); +#276361 = FILL_AREA_STYLE('',(#276362)); +#276362 = FILL_AREA_STYLE_COLOUR('',#270350); +#276363 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276364)); +#276364 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276365 = STYLED_ITEM('color',(#276366),#222275); +#276366 = PRESENTATION_STYLE_ASSIGNMENT((#276367)); +#276367 = SURFACE_STYLE_USAGE(.BOTH.,#276368); +#276368 = SURFACE_SIDE_STYLE('',(#276369,#276372)); +#276369 = SURFACE_STYLE_FILL_AREA(#276370); +#276370 = FILL_AREA_STYLE('',(#276371)); +#276371 = FILL_AREA_STYLE_COLOUR('',#270350); +#276372 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276373)); +#276373 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276374 = STYLED_ITEM('color',(#276375),#222605); +#276375 = PRESENTATION_STYLE_ASSIGNMENT((#276376)); +#276376 = SURFACE_STYLE_USAGE(.BOTH.,#276377); +#276377 = SURFACE_SIDE_STYLE('',(#276378,#276381)); +#276378 = SURFACE_STYLE_FILL_AREA(#276379); +#276379 = FILL_AREA_STYLE('',(#276380)); +#276380 = FILL_AREA_STYLE_COLOUR('',#270350); +#276381 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276382)); +#276382 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276383 = STYLED_ITEM('color',(#276384),#222673); +#276384 = PRESENTATION_STYLE_ASSIGNMENT((#276385)); +#276385 = SURFACE_STYLE_USAGE(.BOTH.,#276386); +#276386 = SURFACE_SIDE_STYLE('',(#276387,#276390)); +#276387 = SURFACE_STYLE_FILL_AREA(#276388); +#276388 = FILL_AREA_STYLE('',(#276389)); +#276389 = FILL_AREA_STYLE_COLOUR('',#270350); +#276390 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276391)); +#276391 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276392 = STYLED_ITEM('color',(#276393),#222876); +#276393 = PRESENTATION_STYLE_ASSIGNMENT((#276394)); +#276394 = SURFACE_STYLE_USAGE(.BOTH.,#276395); +#276395 = SURFACE_SIDE_STYLE('',(#276396,#276399)); +#276396 = SURFACE_STYLE_FILL_AREA(#276397); +#276397 = FILL_AREA_STYLE('',(#276398)); +#276398 = FILL_AREA_STYLE_COLOUR('',#270350); +#276399 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276400)); +#276400 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276401 = STYLED_ITEM('color',(#276402),#222978); +#276402 = PRESENTATION_STYLE_ASSIGNMENT((#276403)); +#276403 = SURFACE_STYLE_USAGE(.BOTH.,#276404); +#276404 = SURFACE_SIDE_STYLE('',(#276405,#276408)); +#276405 = SURFACE_STYLE_FILL_AREA(#276406); +#276406 = FILL_AREA_STYLE('',(#276407)); +#276407 = FILL_AREA_STYLE_COLOUR('',#270350); +#276408 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276409)); +#276409 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276410 = STYLED_ITEM('color',(#276411),#223072); +#276411 = PRESENTATION_STYLE_ASSIGNMENT((#276412)); +#276412 = SURFACE_STYLE_USAGE(.BOTH.,#276413); +#276413 = SURFACE_SIDE_STYLE('',(#276414,#276417)); +#276414 = SURFACE_STYLE_FILL_AREA(#276415); +#276415 = FILL_AREA_STYLE('',(#276416)); +#276416 = FILL_AREA_STYLE_COLOUR('',#270350); +#276417 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276418)); +#276418 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276419 = STYLED_ITEM('color',(#276420),#223166); +#276420 = PRESENTATION_STYLE_ASSIGNMENT((#276421)); +#276421 = SURFACE_STYLE_USAGE(.BOTH.,#276422); +#276422 = SURFACE_SIDE_STYLE('',(#276423,#276426)); +#276423 = SURFACE_STYLE_FILL_AREA(#276424); +#276424 = FILL_AREA_STYLE('',(#276425)); +#276425 = FILL_AREA_STYLE_COLOUR('',#270350); +#276426 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276427)); +#276427 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276428 = STYLED_ITEM('color',(#276429),#223268); +#276429 = PRESENTATION_STYLE_ASSIGNMENT((#276430)); +#276430 = SURFACE_STYLE_USAGE(.BOTH.,#276431); +#276431 = SURFACE_SIDE_STYLE('',(#276432,#276435)); +#276432 = SURFACE_STYLE_FILL_AREA(#276433); +#276433 = FILL_AREA_STYLE('',(#276434)); +#276434 = FILL_AREA_STYLE_COLOUR('',#270350); +#276435 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276436)); +#276436 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276437 = STYLED_ITEM('color',(#276438),#223312); +#276438 = PRESENTATION_STYLE_ASSIGNMENT((#276439)); +#276439 = SURFACE_STYLE_USAGE(.BOTH.,#276440); +#276440 = SURFACE_SIDE_STYLE('',(#276441,#276444)); +#276441 = SURFACE_STYLE_FILL_AREA(#276442); +#276442 = FILL_AREA_STYLE('',(#276443)); +#276443 = FILL_AREA_STYLE_COLOUR('',#270350); +#276444 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276445)); +#276445 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276446 = STYLED_ITEM('color',(#276447),#223414); +#276447 = PRESENTATION_STYLE_ASSIGNMENT((#276448)); +#276448 = SURFACE_STYLE_USAGE(.BOTH.,#276449); +#276449 = SURFACE_SIDE_STYLE('',(#276450,#276453)); +#276450 = SURFACE_STYLE_FILL_AREA(#276451); +#276451 = FILL_AREA_STYLE('',(#276452)); +#276452 = FILL_AREA_STYLE_COLOUR('',#270350); +#276453 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276454)); +#276454 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276455 = STYLED_ITEM('color',(#276456),#223466); +#276456 = PRESENTATION_STYLE_ASSIGNMENT((#276457)); +#276457 = SURFACE_STYLE_USAGE(.BOTH.,#276458); +#276458 = SURFACE_SIDE_STYLE('',(#276459,#276462)); +#276459 = SURFACE_STYLE_FILL_AREA(#276460); +#276460 = FILL_AREA_STYLE('',(#276461)); +#276461 = FILL_AREA_STYLE_COLOUR('',#270350); +#276462 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276463)); +#276463 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276464 = STYLED_ITEM('color',(#276465),#223796); +#276465 = PRESENTATION_STYLE_ASSIGNMENT((#276466)); +#276466 = SURFACE_STYLE_USAGE(.BOTH.,#276467); +#276467 = SURFACE_SIDE_STYLE('',(#276468,#276471)); +#276468 = SURFACE_STYLE_FILL_AREA(#276469); +#276469 = FILL_AREA_STYLE('',(#276470)); +#276470 = FILL_AREA_STYLE_COLOUR('',#270350); +#276471 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276472)); +#276472 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276473 = STYLED_ITEM('color',(#276474),#224017); +#276474 = PRESENTATION_STYLE_ASSIGNMENT((#276475)); +#276475 = SURFACE_STYLE_USAGE(.BOTH.,#276476); +#276476 = SURFACE_SIDE_STYLE('',(#276477,#276480)); +#276477 = SURFACE_STYLE_FILL_AREA(#276478); +#276478 = FILL_AREA_STYLE('',(#276479)); +#276479 = FILL_AREA_STYLE_COLOUR('',#270350); +#276480 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276481)); +#276481 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276482 = STYLED_ITEM('color',(#276483),#224069); +#276483 = PRESENTATION_STYLE_ASSIGNMENT((#276484)); +#276484 = SURFACE_STYLE_USAGE(.BOTH.,#276485); +#276485 = SURFACE_SIDE_STYLE('',(#276486,#276489)); +#276486 = SURFACE_STYLE_FILL_AREA(#276487); +#276487 = FILL_AREA_STYLE('',(#276488)); +#276488 = FILL_AREA_STYLE_COLOUR('',#270350); +#276489 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276490)); +#276490 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276491 = STYLED_ITEM('color',(#276492),#224137); +#276492 = PRESENTATION_STYLE_ASSIGNMENT((#276493)); +#276493 = SURFACE_STYLE_USAGE(.BOTH.,#276494); +#276494 = SURFACE_SIDE_STYLE('',(#276495,#276498)); +#276495 = SURFACE_STYLE_FILL_AREA(#276496); +#276496 = FILL_AREA_STYLE('',(#276497)); +#276497 = FILL_AREA_STYLE_COLOUR('',#270350); +#276498 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276499)); +#276499 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276500 = STYLED_ITEM('color',(#276501),#224205); +#276501 = PRESENTATION_STYLE_ASSIGNMENT((#276502)); +#276502 = SURFACE_STYLE_USAGE(.BOTH.,#276503); +#276503 = SURFACE_SIDE_STYLE('',(#276504,#276507)); +#276504 = SURFACE_STYLE_FILL_AREA(#276505); +#276505 = FILL_AREA_STYLE('',(#276506)); +#276506 = FILL_AREA_STYLE_COLOUR('',#270350); +#276507 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276508)); +#276508 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276509 = STYLED_ITEM('color',(#276510),#224249); +#276510 = PRESENTATION_STYLE_ASSIGNMENT((#276511)); +#276511 = SURFACE_STYLE_USAGE(.BOTH.,#276512); +#276512 = SURFACE_SIDE_STYLE('',(#276513,#276516)); +#276513 = SURFACE_STYLE_FILL_AREA(#276514); +#276514 = FILL_AREA_STYLE('',(#276515)); +#276515 = FILL_AREA_STYLE_COLOUR('',#270350); +#276516 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276517)); +#276517 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276518 = STYLED_ITEM('color',(#276519),#224343); +#276519 = PRESENTATION_STYLE_ASSIGNMENT((#276520)); +#276520 = SURFACE_STYLE_USAGE(.BOTH.,#276521); +#276521 = SURFACE_SIDE_STYLE('',(#276522,#276525)); +#276522 = SURFACE_STYLE_FILL_AREA(#276523); +#276523 = FILL_AREA_STYLE('',(#276524)); +#276524 = FILL_AREA_STYLE_COLOUR('',#270350); +#276525 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276526)); +#276526 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276527 = STYLED_ITEM('color',(#276528),#224521); +#276528 = PRESENTATION_STYLE_ASSIGNMENT((#276529)); +#276529 = SURFACE_STYLE_USAGE(.BOTH.,#276530); +#276530 = SURFACE_SIDE_STYLE('',(#276531,#276534)); +#276531 = SURFACE_STYLE_FILL_AREA(#276532); +#276532 = FILL_AREA_STYLE('',(#276533)); +#276533 = FILL_AREA_STYLE_COLOUR('',#270350); +#276534 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276535)); +#276535 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276536 = STYLED_ITEM('color',(#276537),#224573); +#276537 = PRESENTATION_STYLE_ASSIGNMENT((#276538)); +#276538 = SURFACE_STYLE_USAGE(.BOTH.,#276539); +#276539 = SURFACE_SIDE_STYLE('',(#276540,#276543)); +#276540 = SURFACE_STYLE_FILL_AREA(#276541); +#276541 = FILL_AREA_STYLE('',(#276542)); +#276542 = FILL_AREA_STYLE_COLOUR('',#270350); +#276543 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276544)); +#276544 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276545 = STYLED_ITEM('color',(#276546),#224744); +#276546 = PRESENTATION_STYLE_ASSIGNMENT((#276547)); +#276547 = SURFACE_STYLE_USAGE(.BOTH.,#276548); +#276548 = SURFACE_SIDE_STYLE('',(#276549,#276552)); +#276549 = SURFACE_STYLE_FILL_AREA(#276550); +#276550 = FILL_AREA_STYLE('',(#276551)); +#276551 = FILL_AREA_STYLE_COLOUR('',#270350); +#276552 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276553)); +#276553 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276554 = STYLED_ITEM('color',(#276555),#224854); +#276555 = PRESENTATION_STYLE_ASSIGNMENT((#276556)); +#276556 = SURFACE_STYLE_USAGE(.BOTH.,#276557); +#276557 = SURFACE_SIDE_STYLE('',(#276558,#276561)); +#276558 = SURFACE_STYLE_FILL_AREA(#276559); +#276559 = FILL_AREA_STYLE('',(#276560)); +#276560 = FILL_AREA_STYLE_COLOUR('',#270350); +#276561 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276562)); +#276562 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276563 = STYLED_ITEM('color',(#276564),#225103); +#276564 = PRESENTATION_STYLE_ASSIGNMENT((#276565)); +#276565 = SURFACE_STYLE_USAGE(.BOTH.,#276566); +#276566 = SURFACE_SIDE_STYLE('',(#276567,#276570)); +#276567 = SURFACE_STYLE_FILL_AREA(#276568); +#276568 = FILL_AREA_STYLE('',(#276569)); +#276569 = FILL_AREA_STYLE_COLOUR('',#270350); +#276570 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276571)); +#276571 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276572 = STYLED_ITEM('color',(#276573),#225197); +#276573 = PRESENTATION_STYLE_ASSIGNMENT((#276574)); +#276574 = SURFACE_STYLE_USAGE(.BOTH.,#276575); +#276575 = SURFACE_SIDE_STYLE('',(#276576,#276579)); +#276576 = SURFACE_STYLE_FILL_AREA(#276577); +#276577 = FILL_AREA_STYLE('',(#276578)); +#276578 = FILL_AREA_STYLE_COLOUR('',#270350); +#276579 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276580)); +#276580 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276581 = STYLED_ITEM('color',(#276582),#225265); +#276582 = PRESENTATION_STYLE_ASSIGNMENT((#276583)); +#276583 = SURFACE_STYLE_USAGE(.BOTH.,#276584); +#276584 = SURFACE_SIDE_STYLE('',(#276585,#276588)); +#276585 = SURFACE_STYLE_FILL_AREA(#276586); +#276586 = FILL_AREA_STYLE('',(#276587)); +#276587 = FILL_AREA_STYLE_COLOUR('',#270350); +#276588 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276589)); +#276589 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276590 = STYLED_ITEM('color',(#276591),#225309); +#276591 = PRESENTATION_STYLE_ASSIGNMENT((#276592)); +#276592 = SURFACE_STYLE_USAGE(.BOTH.,#276593); +#276593 = SURFACE_SIDE_STYLE('',(#276594,#276597)); +#276594 = SURFACE_STYLE_FILL_AREA(#276595); +#276595 = FILL_AREA_STYLE('',(#276596)); +#276596 = FILL_AREA_STYLE_COLOUR('',#270350); +#276597 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276598)); +#276598 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276599 = STYLED_ITEM('color',(#276600),#225353); +#276600 = PRESENTATION_STYLE_ASSIGNMENT((#276601)); +#276601 = SURFACE_STYLE_USAGE(.BOTH.,#276602); +#276602 = SURFACE_SIDE_STYLE('',(#276603,#276606)); +#276603 = SURFACE_STYLE_FILL_AREA(#276604); +#276604 = FILL_AREA_STYLE('',(#276605)); +#276605 = FILL_AREA_STYLE_COLOUR('',#270350); +#276606 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276607)); +#276607 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276608 = STYLED_ITEM('color',(#276609),#225397); +#276609 = PRESENTATION_STYLE_ASSIGNMENT((#276610)); +#276610 = SURFACE_STYLE_USAGE(.BOTH.,#276611); +#276611 = SURFACE_SIDE_STYLE('',(#276612,#276615)); +#276612 = SURFACE_STYLE_FILL_AREA(#276613); +#276613 = FILL_AREA_STYLE('',(#276614)); +#276614 = FILL_AREA_STYLE_COLOUR('',#270350); +#276615 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276616)); +#276616 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276617 = STYLED_ITEM('color',(#276618),#225441); +#276618 = PRESENTATION_STYLE_ASSIGNMENT((#276619)); +#276619 = SURFACE_STYLE_USAGE(.BOTH.,#276620); +#276620 = SURFACE_SIDE_STYLE('',(#276621,#276624)); +#276621 = SURFACE_STYLE_FILL_AREA(#276622); +#276622 = FILL_AREA_STYLE('',(#276623)); +#276623 = FILL_AREA_STYLE_COLOUR('',#270350); +#276624 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276625)); +#276625 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276626 = STYLED_ITEM('color',(#276627),#225535); +#276627 = PRESENTATION_STYLE_ASSIGNMENT((#276628)); +#276628 = SURFACE_STYLE_USAGE(.BOTH.,#276629); +#276629 = SURFACE_SIDE_STYLE('',(#276630,#276633)); +#276630 = SURFACE_STYLE_FILL_AREA(#276631); +#276631 = FILL_AREA_STYLE('',(#276632)); +#276632 = FILL_AREA_STYLE_COLOUR('',#270350); +#276633 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276634)); +#276634 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276635 = STYLED_ITEM('color',(#276636),#225629); +#276636 = PRESENTATION_STYLE_ASSIGNMENT((#276637)); +#276637 = SURFACE_STYLE_USAGE(.BOTH.,#276638); +#276638 = SURFACE_SIDE_STYLE('',(#276639,#276642)); +#276639 = SURFACE_STYLE_FILL_AREA(#276640); +#276640 = FILL_AREA_STYLE('',(#276641)); +#276641 = FILL_AREA_STYLE_COLOUR('',#270350); +#276642 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276643)); +#276643 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276644 = STYLED_ITEM('color',(#276645),#225731); +#276645 = PRESENTATION_STYLE_ASSIGNMENT((#276646)); +#276646 = SURFACE_STYLE_USAGE(.BOTH.,#276647); +#276647 = SURFACE_SIDE_STYLE('',(#276648,#276651)); +#276648 = SURFACE_STYLE_FILL_AREA(#276649); +#276649 = FILL_AREA_STYLE('',(#276650)); +#276650 = FILL_AREA_STYLE_COLOUR('',#270350); +#276651 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276652)); +#276652 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276653 = STYLED_ITEM('color',(#276654),#225938); +#276654 = PRESENTATION_STYLE_ASSIGNMENT((#276655)); +#276655 = SURFACE_STYLE_USAGE(.BOTH.,#276656); +#276656 = SURFACE_SIDE_STYLE('',(#276657,#276660)); +#276657 = SURFACE_STYLE_FILL_AREA(#276658); +#276658 = FILL_AREA_STYLE('',(#276659)); +#276659 = FILL_AREA_STYLE_COLOUR('',#270350); +#276660 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276661)); +#276661 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276662 = STYLED_ITEM('color',(#276663),#226194); +#276663 = PRESENTATION_STYLE_ASSIGNMENT((#276664)); +#276664 = SURFACE_STYLE_USAGE(.BOTH.,#276665); +#276665 = SURFACE_SIDE_STYLE('',(#276666,#276669)); +#276666 = SURFACE_STYLE_FILL_AREA(#276667); +#276667 = FILL_AREA_STYLE('',(#276668)); +#276668 = FILL_AREA_STYLE_COLOUR('',#270350); +#276669 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276670)); +#276670 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276671 = STYLED_ITEM('color',(#276672),#226404); +#276672 = PRESENTATION_STYLE_ASSIGNMENT((#276673)); +#276673 = SURFACE_STYLE_USAGE(.BOTH.,#276674); +#276674 = SURFACE_SIDE_STYLE('',(#276675,#276678)); +#276675 = SURFACE_STYLE_FILL_AREA(#276676); +#276676 = FILL_AREA_STYLE('',(#276677)); +#276677 = FILL_AREA_STYLE_COLOUR('',#270350); +#276678 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276679)); +#276679 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276680 = STYLED_ITEM('color',(#276681),#226546); +#276681 = PRESENTATION_STYLE_ASSIGNMENT((#276682)); +#276682 = SURFACE_STYLE_USAGE(.BOTH.,#276683); +#276683 = SURFACE_SIDE_STYLE('',(#276684,#276687)); +#276684 = SURFACE_STYLE_FILL_AREA(#276685); +#276685 = FILL_AREA_STYLE('',(#276686)); +#276686 = FILL_AREA_STYLE_COLOUR('',#270350); +#276687 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276688)); +#276688 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276689 = STYLED_ITEM('color',(#276690),#226753); +#276690 = PRESENTATION_STYLE_ASSIGNMENT((#276691)); +#276691 = SURFACE_STYLE_USAGE(.BOTH.,#276692); +#276692 = SURFACE_SIDE_STYLE('',(#276693,#276696)); +#276693 = SURFACE_STYLE_FILL_AREA(#276694); +#276694 = FILL_AREA_STYLE('',(#276695)); +#276695 = FILL_AREA_STYLE_COLOUR('',#270350); +#276696 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276697)); +#276697 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276698 = STYLED_ITEM('color',(#276699),#226965); +#276699 = PRESENTATION_STYLE_ASSIGNMENT((#276700)); +#276700 = SURFACE_STYLE_USAGE(.BOTH.,#276701); +#276701 = SURFACE_SIDE_STYLE('',(#276702,#276705)); +#276702 = SURFACE_STYLE_FILL_AREA(#276703); +#276703 = FILL_AREA_STYLE('',(#276704)); +#276704 = FILL_AREA_STYLE_COLOUR('',#270350); +#276705 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276706)); +#276706 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276707 = STYLED_ITEM('color',(#276708),#227117); +#276708 = PRESENTATION_STYLE_ASSIGNMENT((#276709)); +#276709 = SURFACE_STYLE_USAGE(.BOTH.,#276710); +#276710 = SURFACE_SIDE_STYLE('',(#276711,#276714)); +#276711 = SURFACE_STYLE_FILL_AREA(#276712); +#276712 = FILL_AREA_STYLE('',(#276713)); +#276713 = FILL_AREA_STYLE_COLOUR('',#270350); +#276714 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276715)); +#276715 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276716 = STYLED_ITEM('color',(#276717),#227161); +#276717 = PRESENTATION_STYLE_ASSIGNMENT((#276718)); +#276718 = SURFACE_STYLE_USAGE(.BOTH.,#276719); +#276719 = SURFACE_SIDE_STYLE('',(#276720,#276723)); +#276720 = SURFACE_STYLE_FILL_AREA(#276721); +#276721 = FILL_AREA_STYLE('',(#276722)); +#276722 = FILL_AREA_STYLE_COLOUR('',#270350); +#276723 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276724)); +#276724 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276725 = STYLED_ITEM('color',(#276726),#227205); +#276726 = PRESENTATION_STYLE_ASSIGNMENT((#276727)); +#276727 = SURFACE_STYLE_USAGE(.BOTH.,#276728); +#276728 = SURFACE_SIDE_STYLE('',(#276729,#276732)); +#276729 = SURFACE_STYLE_FILL_AREA(#276730); +#276730 = FILL_AREA_STYLE('',(#276731)); +#276731 = FILL_AREA_STYLE_COLOUR('',#270350); +#276732 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276733)); +#276733 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276734 = STYLED_ITEM('color',(#276735),#227249); +#276735 = PRESENTATION_STYLE_ASSIGNMENT((#276736)); +#276736 = SURFACE_STYLE_USAGE(.BOTH.,#276737); +#276737 = SURFACE_SIDE_STYLE('',(#276738,#276741)); +#276738 = SURFACE_STYLE_FILL_AREA(#276739); +#276739 = FILL_AREA_STYLE('',(#276740)); +#276740 = FILL_AREA_STYLE_COLOUR('',#270350); +#276741 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276742)); +#276742 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276743 = STYLED_ITEM('color',(#276744),#227293); +#276744 = PRESENTATION_STYLE_ASSIGNMENT((#276745)); +#276745 = SURFACE_STYLE_USAGE(.BOTH.,#276746); +#276746 = SURFACE_SIDE_STYLE('',(#276747,#276750)); +#276747 = SURFACE_STYLE_FILL_AREA(#276748); +#276748 = FILL_AREA_STYLE('',(#276749)); +#276749 = FILL_AREA_STYLE_COLOUR('',#270350); +#276750 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276751)); +#276751 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276752 = STYLED_ITEM('color',(#276753),#227378); +#276753 = PRESENTATION_STYLE_ASSIGNMENT((#276754)); +#276754 = SURFACE_STYLE_USAGE(.BOTH.,#276755); +#276755 = SURFACE_SIDE_STYLE('',(#276756,#276759)); +#276756 = SURFACE_STYLE_FILL_AREA(#276757); +#276757 = FILL_AREA_STYLE('',(#276758)); +#276758 = FILL_AREA_STYLE_COLOUR('',#270350); +#276759 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276760)); +#276760 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276761 = STYLED_ITEM('color',(#276762),#227562); +#276762 = PRESENTATION_STYLE_ASSIGNMENT((#276763)); +#276763 = SURFACE_STYLE_USAGE(.BOTH.,#276764); +#276764 = SURFACE_SIDE_STYLE('',(#276765,#276768)); +#276765 = SURFACE_STYLE_FILL_AREA(#276766); +#276766 = FILL_AREA_STYLE('',(#276767)); +#276767 = FILL_AREA_STYLE_COLOUR('',#270350); +#276768 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276769)); +#276769 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276770 = STYLED_ITEM('color',(#276771),#227704); +#276771 = PRESENTATION_STYLE_ASSIGNMENT((#276772)); +#276772 = SURFACE_STYLE_USAGE(.BOTH.,#276773); +#276773 = SURFACE_SIDE_STYLE('',(#276774,#276777)); +#276774 = SURFACE_STYLE_FILL_AREA(#276775); +#276775 = FILL_AREA_STYLE('',(#276776)); +#276776 = FILL_AREA_STYLE_COLOUR('',#270350); +#276777 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276778)); +#276778 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276779 = STYLED_ITEM('color',(#276780),#227871); +#276780 = PRESENTATION_STYLE_ASSIGNMENT((#276781)); +#276781 = SURFACE_STYLE_USAGE(.BOTH.,#276782); +#276782 = SURFACE_SIDE_STYLE('',(#276783,#276786)); +#276783 = SURFACE_STYLE_FILL_AREA(#276784); +#276784 = FILL_AREA_STYLE('',(#276785)); +#276785 = FILL_AREA_STYLE_COLOUR('',#270350); +#276786 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276787)); +#276787 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276788 = STYLED_ITEM('color',(#276789),#228013); +#276789 = PRESENTATION_STYLE_ASSIGNMENT((#276790)); +#276790 = SURFACE_STYLE_USAGE(.BOTH.,#276791); +#276791 = SURFACE_SIDE_STYLE('',(#276792,#276795)); +#276792 = SURFACE_STYLE_FILL_AREA(#276793); +#276793 = FILL_AREA_STYLE('',(#276794)); +#276794 = FILL_AREA_STYLE_COLOUR('',#270350); +#276795 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276796)); +#276796 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276797 = STYLED_ITEM('color',(#276798),#228180); +#276798 = PRESENTATION_STYLE_ASSIGNMENT((#276799)); +#276799 = SURFACE_STYLE_USAGE(.BOTH.,#276800); +#276800 = SURFACE_SIDE_STYLE('',(#276801,#276804)); +#276801 = SURFACE_STYLE_FILL_AREA(#276802); +#276802 = FILL_AREA_STYLE('',(#276803)); +#276803 = FILL_AREA_STYLE_COLOUR('',#270350); +#276804 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276805)); +#276805 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276806 = STYLED_ITEM('color',(#276807),#228351); +#276807 = PRESENTATION_STYLE_ASSIGNMENT((#276808)); +#276808 = SURFACE_STYLE_USAGE(.BOTH.,#276809); +#276809 = SURFACE_SIDE_STYLE('',(#276810,#276813)); +#276810 = SURFACE_STYLE_FILL_AREA(#276811); +#276811 = FILL_AREA_STYLE('',(#276812)); +#276812 = FILL_AREA_STYLE_COLOUR('',#270350); +#276813 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276814)); +#276814 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276815 = STYLED_ITEM('color',(#276816),#228522); +#276816 = PRESENTATION_STYLE_ASSIGNMENT((#276817)); +#276817 = SURFACE_STYLE_USAGE(.BOTH.,#276818); +#276818 = SURFACE_SIDE_STYLE('',(#276819,#276822)); +#276819 = SURFACE_STYLE_FILL_AREA(#276820); +#276820 = FILL_AREA_STYLE('',(#276821)); +#276821 = FILL_AREA_STYLE_COLOUR('',#270350); +#276822 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276823)); +#276823 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276824 = STYLED_ITEM('color',(#276825),#228693); +#276825 = PRESENTATION_STYLE_ASSIGNMENT((#276826)); +#276826 = SURFACE_STYLE_USAGE(.BOTH.,#276827); +#276827 = SURFACE_SIDE_STYLE('',(#276828,#276831)); +#276828 = SURFACE_STYLE_FILL_AREA(#276829); +#276829 = FILL_AREA_STYLE('',(#276830)); +#276830 = FILL_AREA_STYLE_COLOUR('',#270350); +#276831 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276832)); +#276832 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276833 = STYLED_ITEM('color',(#276834),#228864); +#276834 = PRESENTATION_STYLE_ASSIGNMENT((#276835)); +#276835 = SURFACE_STYLE_USAGE(.BOTH.,#276836); +#276836 = SURFACE_SIDE_STYLE('',(#276837,#276840)); +#276837 = SURFACE_STYLE_FILL_AREA(#276838); +#276838 = FILL_AREA_STYLE('',(#276839)); +#276839 = FILL_AREA_STYLE_COLOUR('',#270350); +#276840 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276841)); +#276841 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276842 = STYLED_ITEM('color',(#276843),#229095); +#276843 = PRESENTATION_STYLE_ASSIGNMENT((#276844)); +#276844 = SURFACE_STYLE_USAGE(.BOTH.,#276845); +#276845 = SURFACE_SIDE_STYLE('',(#276846,#276849)); +#276846 = SURFACE_STYLE_FILL_AREA(#276847); +#276847 = FILL_AREA_STYLE('',(#276848)); +#276848 = FILL_AREA_STYLE_COLOUR('',#270350); +#276849 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276850)); +#276850 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276851 = STYLED_ITEM('color',(#276852),#229261); +#276852 = PRESENTATION_STYLE_ASSIGNMENT((#276853)); +#276853 = SURFACE_STYLE_USAGE(.BOTH.,#276854); +#276854 = SURFACE_SIDE_STYLE('',(#276855,#276858)); +#276855 = SURFACE_STYLE_FILL_AREA(#276856); +#276856 = FILL_AREA_STYLE('',(#276857)); +#276857 = FILL_AREA_STYLE_COLOUR('',#270350); +#276858 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276859)); +#276859 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276860 = STYLED_ITEM('color',(#276861),#229492); +#276861 = PRESENTATION_STYLE_ASSIGNMENT((#276862)); +#276862 = SURFACE_STYLE_USAGE(.BOTH.,#276863); +#276863 = SURFACE_SIDE_STYLE('',(#276864,#276867)); +#276864 = SURFACE_STYLE_FILL_AREA(#276865); +#276865 = FILL_AREA_STYLE('',(#276866)); +#276866 = FILL_AREA_STYLE_COLOUR('',#270350); +#276867 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276868)); +#276868 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276869 = STYLED_ITEM('color',(#276870),#229658); +#276870 = PRESENTATION_STYLE_ASSIGNMENT((#276871)); +#276871 = SURFACE_STYLE_USAGE(.BOTH.,#276872); +#276872 = SURFACE_SIDE_STYLE('',(#276873,#276876)); +#276873 = SURFACE_STYLE_FILL_AREA(#276874); +#276874 = FILL_AREA_STYLE('',(#276875)); +#276875 = FILL_AREA_STYLE_COLOUR('',#270350); +#276876 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276877)); +#276877 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276878 = STYLED_ITEM('color',(#276879),#229894); +#276879 = PRESENTATION_STYLE_ASSIGNMENT((#276880)); +#276880 = SURFACE_STYLE_USAGE(.BOTH.,#276881); +#276881 = SURFACE_SIDE_STYLE('',(#276882,#276885)); +#276882 = SURFACE_STYLE_FILL_AREA(#276883); +#276883 = FILL_AREA_STYLE('',(#276884)); +#276884 = FILL_AREA_STYLE_COLOUR('',#270350); +#276885 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276886)); +#276886 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276887 = STYLED_ITEM('color',(#276888),#229971); +#276888 = PRESENTATION_STYLE_ASSIGNMENT((#276889)); +#276889 = SURFACE_STYLE_USAGE(.BOTH.,#276890); +#276890 = SURFACE_SIDE_STYLE('',(#276891,#276894)); +#276891 = SURFACE_STYLE_FILL_AREA(#276892); +#276892 = FILL_AREA_STYLE('',(#276893)); +#276893 = FILL_AREA_STYLE_COLOUR('',#270350); +#276894 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276895)); +#276895 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276896 = STYLED_ITEM('color',(#276897),#230116); +#276897 = PRESENTATION_STYLE_ASSIGNMENT((#276898)); +#276898 = SURFACE_STYLE_USAGE(.BOTH.,#276899); +#276899 = SURFACE_SIDE_STYLE('',(#276900,#276903)); +#276900 = SURFACE_STYLE_FILL_AREA(#276901); +#276901 = FILL_AREA_STYLE('',(#276902)); +#276902 = FILL_AREA_STYLE_COLOUR('',#270350); +#276903 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276904)); +#276904 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276905 = STYLED_ITEM('color',(#276906),#230294); +#276906 = PRESENTATION_STYLE_ASSIGNMENT((#276907)); +#276907 = SURFACE_STYLE_USAGE(.BOTH.,#276908); +#276908 = SURFACE_SIDE_STYLE('',(#276909,#276912)); +#276909 = SURFACE_STYLE_FILL_AREA(#276910); +#276910 = FILL_AREA_STYLE('',(#276911)); +#276911 = FILL_AREA_STYLE_COLOUR('',#270350); +#276912 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276913)); +#276913 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276914 = STYLED_ITEM('color',(#276915),#230372); +#276915 = PRESENTATION_STYLE_ASSIGNMENT((#276916)); +#276916 = SURFACE_STYLE_USAGE(.BOTH.,#276917); +#276917 = SURFACE_SIDE_STYLE('',(#276918,#276921)); +#276918 = SURFACE_STYLE_FILL_AREA(#276919); +#276919 = FILL_AREA_STYLE('',(#276920)); +#276920 = FILL_AREA_STYLE_COLOUR('',#270350); +#276921 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276922)); +#276922 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276923 = STYLED_ITEM('color',(#276924),#230539); +#276924 = PRESENTATION_STYLE_ASSIGNMENT((#276925)); +#276925 = SURFACE_STYLE_USAGE(.BOTH.,#276926); +#276926 = SURFACE_SIDE_STYLE('',(#276927,#276930)); +#276927 = SURFACE_STYLE_FILL_AREA(#276928); +#276928 = FILL_AREA_STYLE('',(#276929)); +#276929 = FILL_AREA_STYLE_COLOUR('',#270350); +#276930 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276931)); +#276931 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276932 = STYLED_ITEM('color',(#276933),#230667); +#276933 = PRESENTATION_STYLE_ASSIGNMENT((#276934)); +#276934 = SURFACE_STYLE_USAGE(.BOTH.,#276935); +#276935 = SURFACE_SIDE_STYLE('',(#276936,#276939)); +#276936 = SURFACE_STYLE_FILL_AREA(#276937); +#276937 = FILL_AREA_STYLE('',(#276938)); +#276938 = FILL_AREA_STYLE_COLOUR('',#270350); +#276939 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276940)); +#276940 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276941 = STYLED_ITEM('color',(#276942),#230736); +#276942 = PRESENTATION_STYLE_ASSIGNMENT((#276943)); +#276943 = SURFACE_STYLE_USAGE(.BOTH.,#276944); +#276944 = SURFACE_SIDE_STYLE('',(#276945,#276948)); +#276945 = SURFACE_STYLE_FILL_AREA(#276946); +#276946 = FILL_AREA_STYLE('',(#276947)); +#276947 = FILL_AREA_STYLE_COLOUR('',#270350); +#276948 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276949)); +#276949 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276950 = STYLED_ITEM('color',(#276951),#230918); +#276951 = PRESENTATION_STYLE_ASSIGNMENT((#276952)); +#276952 = SURFACE_STYLE_USAGE(.BOTH.,#276953); +#276953 = SURFACE_SIDE_STYLE('',(#276954,#276957)); +#276954 = SURFACE_STYLE_FILL_AREA(#276955); +#276955 = FILL_AREA_STYLE('',(#276956)); +#276956 = FILL_AREA_STYLE_COLOUR('',#270350); +#276957 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276958)); +#276958 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276959 = STYLED_ITEM('color',(#276960),#230987); +#276960 = PRESENTATION_STYLE_ASSIGNMENT((#276961)); +#276961 = SURFACE_STYLE_USAGE(.BOTH.,#276962); +#276962 = SURFACE_SIDE_STYLE('',(#276963,#276966)); +#276963 = SURFACE_STYLE_FILL_AREA(#276964); +#276964 = FILL_AREA_STYLE('',(#276965)); +#276965 = FILL_AREA_STYLE_COLOUR('',#270350); +#276966 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276967)); +#276967 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276968 = STYLED_ITEM('color',(#276969),#231129); +#276969 = PRESENTATION_STYLE_ASSIGNMENT((#276970)); +#276970 = SURFACE_STYLE_USAGE(.BOTH.,#276971); +#276971 = SURFACE_SIDE_STYLE('',(#276972,#276975)); +#276972 = SURFACE_STYLE_FILL_AREA(#276973); +#276973 = FILL_AREA_STYLE('',(#276974)); +#276974 = FILL_AREA_STYLE_COLOUR('',#270350); +#276975 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276976)); +#276976 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276977 = STYLED_ITEM('color',(#276978),#231322); +#276978 = PRESENTATION_STYLE_ASSIGNMENT((#276979)); +#276979 = SURFACE_STYLE_USAGE(.BOTH.,#276980); +#276980 = SURFACE_SIDE_STYLE('',(#276981,#276984)); +#276981 = SURFACE_STYLE_FILL_AREA(#276982); +#276982 = FILL_AREA_STYLE('',(#276983)); +#276983 = FILL_AREA_STYLE_COLOUR('',#270350); +#276984 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276985)); +#276985 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276986 = STYLED_ITEM('color',(#276987),#231374); +#276987 = PRESENTATION_STYLE_ASSIGNMENT((#276988)); +#276988 = SURFACE_STYLE_USAGE(.BOTH.,#276989); +#276989 = SURFACE_SIDE_STYLE('',(#276990,#276993)); +#276990 = SURFACE_STYLE_FILL_AREA(#276991); +#276991 = FILL_AREA_STYLE('',(#276992)); +#276992 = FILL_AREA_STYLE_COLOUR('',#270350); +#276993 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#276994)); +#276994 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276995 = STYLED_ITEM('color',(#276996),#231426); +#276996 = PRESENTATION_STYLE_ASSIGNMENT((#276997)); +#276997 = SURFACE_STYLE_USAGE(.BOTH.,#276998); +#276998 = SURFACE_SIDE_STYLE('',(#276999,#277002)); +#276999 = SURFACE_STYLE_FILL_AREA(#277000); +#277000 = FILL_AREA_STYLE('',(#277001)); +#277001 = FILL_AREA_STYLE_COLOUR('',#270350); +#277002 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277003)); +#277003 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277004 = STYLED_ITEM('color',(#277005),#231536); +#277005 = PRESENTATION_STYLE_ASSIGNMENT((#277006)); +#277006 = SURFACE_STYLE_USAGE(.BOTH.,#277007); +#277007 = SURFACE_SIDE_STYLE('',(#277008,#277011)); +#277008 = SURFACE_STYLE_FILL_AREA(#277009); +#277009 = FILL_AREA_STYLE('',(#277010)); +#277010 = FILL_AREA_STYLE_COLOUR('',#270350); +#277011 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277012)); +#277012 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277013 = STYLED_ITEM('color',(#277014),#231604); +#277014 = PRESENTATION_STYLE_ASSIGNMENT((#277015)); +#277015 = SURFACE_STYLE_USAGE(.BOTH.,#277016); +#277016 = SURFACE_SIDE_STYLE('',(#277017,#277020)); +#277017 = SURFACE_STYLE_FILL_AREA(#277018); +#277018 = FILL_AREA_STYLE('',(#277019)); +#277019 = FILL_AREA_STYLE_COLOUR('',#270350); +#277020 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277021)); +#277021 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277022 = STYLED_ITEM('color',(#277023),#231704); +#277023 = PRESENTATION_STYLE_ASSIGNMENT((#277024)); +#277024 = SURFACE_STYLE_USAGE(.BOTH.,#277025); +#277025 = SURFACE_SIDE_STYLE('',(#277026,#277029)); +#277026 = SURFACE_STYLE_FILL_AREA(#277027); +#277027 = FILL_AREA_STYLE('',(#277028)); +#277028 = FILL_AREA_STYLE_COLOUR('',#270350); +#277029 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277030)); +#277030 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277031 = STYLED_ITEM('color',(#277032),#231796); +#277032 = PRESENTATION_STYLE_ASSIGNMENT((#277033)); +#277033 = SURFACE_STYLE_USAGE(.BOTH.,#277034); +#277034 = SURFACE_SIDE_STYLE('',(#277035,#277038)); +#277035 = SURFACE_STYLE_FILL_AREA(#277036); +#277036 = FILL_AREA_STYLE('',(#277037)); +#277037 = FILL_AREA_STYLE_COLOUR('',#270350); +#277038 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277039)); +#277039 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277040 = STYLED_ITEM('color',(#277041),#232027); +#277041 = PRESENTATION_STYLE_ASSIGNMENT((#277042)); +#277042 = SURFACE_STYLE_USAGE(.BOTH.,#277043); +#277043 = SURFACE_SIDE_STYLE('',(#277044,#277047)); +#277044 = SURFACE_STYLE_FILL_AREA(#277045); +#277045 = FILL_AREA_STYLE('',(#277046)); +#277046 = FILL_AREA_STYLE_COLOUR('',#270350); +#277047 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277048)); +#277048 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277049 = STYLED_ITEM('color',(#277050),#232137); +#277050 = PRESENTATION_STYLE_ASSIGNMENT((#277051)); +#277051 = SURFACE_STYLE_USAGE(.BOTH.,#277052); +#277052 = SURFACE_SIDE_STYLE('',(#277053,#277056)); +#277053 = SURFACE_STYLE_FILL_AREA(#277054); +#277054 = FILL_AREA_STYLE('',(#277055)); +#277055 = FILL_AREA_STYLE_COLOUR('',#270350); +#277056 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277057)); +#277057 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277058 = STYLED_ITEM('color',(#277059),#232281); +#277059 = PRESENTATION_STYLE_ASSIGNMENT((#277060)); +#277060 = SURFACE_STYLE_USAGE(.BOTH.,#277061); +#277061 = SURFACE_SIDE_STYLE('',(#277062,#277065)); +#277062 = SURFACE_STYLE_FILL_AREA(#277063); +#277063 = FILL_AREA_STYLE('',(#277064)); +#277064 = FILL_AREA_STYLE_COLOUR('',#270350); +#277065 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277066)); +#277066 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277067 = STYLED_ITEM('color',(#277068),#232416); +#277068 = PRESENTATION_STYLE_ASSIGNMENT((#277069)); +#277069 = SURFACE_STYLE_USAGE(.BOTH.,#277070); +#277070 = SURFACE_SIDE_STYLE('',(#277071,#277074)); +#277071 = SURFACE_STYLE_FILL_AREA(#277072); +#277072 = FILL_AREA_STYLE('',(#277073)); +#277073 = FILL_AREA_STYLE_COLOUR('',#270350); +#277074 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277075)); +#277075 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277076 = STYLED_ITEM('color',(#277077),#232610); +#277077 = PRESENTATION_STYLE_ASSIGNMENT((#277078)); +#277078 = SURFACE_STYLE_USAGE(.BOTH.,#277079); +#277079 = SURFACE_SIDE_STYLE('',(#277080,#277083)); +#277080 = SURFACE_STYLE_FILL_AREA(#277081); +#277081 = FILL_AREA_STYLE('',(#277082)); +#277082 = FILL_AREA_STYLE_COLOUR('',#270350); +#277083 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277084)); +#277084 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277085 = STYLED_ITEM('color',(#277086),#232859); +#277086 = PRESENTATION_STYLE_ASSIGNMENT((#277087)); +#277087 = SURFACE_STYLE_USAGE(.BOTH.,#277088); +#277088 = SURFACE_SIDE_STYLE('',(#277089,#277092)); +#277089 = SURFACE_STYLE_FILL_AREA(#277090); +#277090 = FILL_AREA_STYLE('',(#277091)); +#277091 = FILL_AREA_STYLE_COLOUR('',#270350); +#277092 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277093)); +#277093 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277094 = STYLED_ITEM('color',(#277095),#232953); +#277095 = PRESENTATION_STYLE_ASSIGNMENT((#277096)); +#277096 = SURFACE_STYLE_USAGE(.BOTH.,#277097); +#277097 = SURFACE_SIDE_STYLE('',(#277098,#277101)); +#277098 = SURFACE_STYLE_FILL_AREA(#277099); +#277099 = FILL_AREA_STYLE('',(#277100)); +#277100 = FILL_AREA_STYLE_COLOUR('',#270350); +#277101 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277102)); +#277102 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277103 = STYLED_ITEM('color',(#277104),#233047); +#277104 = PRESENTATION_STYLE_ASSIGNMENT((#277105)); +#277105 = SURFACE_STYLE_USAGE(.BOTH.,#277106); +#277106 = SURFACE_SIDE_STYLE('',(#277107,#277110)); +#277107 = SURFACE_STYLE_FILL_AREA(#277108); +#277108 = FILL_AREA_STYLE('',(#277109)); +#277109 = FILL_AREA_STYLE_COLOUR('',#270350); +#277110 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277111)); +#277111 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277112 = STYLED_ITEM('color',(#277113),#233315); +#277113 = PRESENTATION_STYLE_ASSIGNMENT((#277114)); +#277114 = SURFACE_STYLE_USAGE(.BOTH.,#277115); +#277115 = SURFACE_SIDE_STYLE('',(#277116,#277119)); +#277116 = SURFACE_STYLE_FILL_AREA(#277117); +#277117 = FILL_AREA_STYLE('',(#277118)); +#277118 = FILL_AREA_STYLE_COLOUR('',#270350); +#277119 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277120)); +#277120 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277121 = STYLED_ITEM('color',(#277122),#233564); +#277122 = PRESENTATION_STYLE_ASSIGNMENT((#277123)); +#277123 = SURFACE_STYLE_USAGE(.BOTH.,#277124); +#277124 = SURFACE_SIDE_STYLE('',(#277125,#277128)); +#277125 = SURFACE_STYLE_FILL_AREA(#277126); +#277126 = FILL_AREA_STYLE('',(#277127)); +#277127 = FILL_AREA_STYLE_COLOUR('',#270350); +#277128 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277129)); +#277129 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277130 = STYLED_ITEM('color',(#277131),#233674); +#277131 = PRESENTATION_STYLE_ASSIGNMENT((#277132)); +#277132 = SURFACE_STYLE_USAGE(.BOTH.,#277133); +#277133 = SURFACE_SIDE_STYLE('',(#277134,#277137)); +#277134 = SURFACE_STYLE_FILL_AREA(#277135); +#277135 = FILL_AREA_STYLE('',(#277136)); +#277136 = FILL_AREA_STYLE_COLOUR('',#270350); +#277137 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277138)); +#277138 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277139 = STYLED_ITEM('color',(#277140),#233842); +#277140 = PRESENTATION_STYLE_ASSIGNMENT((#277141)); +#277141 = SURFACE_STYLE_USAGE(.BOTH.,#277142); +#277142 = SURFACE_SIDE_STYLE('',(#277143,#277146)); +#277143 = SURFACE_STYLE_FILL_AREA(#277144); +#277144 = FILL_AREA_STYLE('',(#277145)); +#277145 = FILL_AREA_STYLE_COLOUR('',#270350); +#277146 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277147)); +#277147 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277148 = STYLED_ITEM('color',(#277149),#233886); +#277149 = PRESENTATION_STYLE_ASSIGNMENT((#277150)); +#277150 = SURFACE_STYLE_USAGE(.BOTH.,#277151); +#277151 = SURFACE_SIDE_STYLE('',(#277152,#277155)); +#277152 = SURFACE_STYLE_FILL_AREA(#277153); +#277153 = FILL_AREA_STYLE('',(#277154)); +#277154 = FILL_AREA_STYLE_COLOUR('',#270350); +#277155 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277156)); +#277156 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277157 = STYLED_ITEM('color',(#277158),#234096); +#277158 = PRESENTATION_STYLE_ASSIGNMENT((#277159)); +#277159 = SURFACE_STYLE_USAGE(.BOTH.,#277160); +#277160 = SURFACE_SIDE_STYLE('',(#277161,#277164)); +#277161 = SURFACE_STYLE_FILL_AREA(#277162); +#277162 = FILL_AREA_STYLE('',(#277163)); +#277163 = FILL_AREA_STYLE_COLOUR('',#270350); +#277164 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277165)); +#277165 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277166 = STYLED_ITEM('color',(#277167),#234274); +#277167 = PRESENTATION_STYLE_ASSIGNMENT((#277168)); +#277168 = SURFACE_STYLE_USAGE(.BOTH.,#277169); +#277169 = SURFACE_SIDE_STYLE('',(#277170,#277173)); +#277170 = SURFACE_STYLE_FILL_AREA(#277171); +#277171 = FILL_AREA_STYLE('',(#277172)); +#277172 = FILL_AREA_STYLE_COLOUR('',#270350); +#277173 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277174)); +#277174 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277175 = STYLED_ITEM('color',(#277176),#234359); +#277176 = PRESENTATION_STYLE_ASSIGNMENT((#277177)); +#277177 = SURFACE_STYLE_USAGE(.BOTH.,#277178); +#277178 = SURFACE_SIDE_STYLE('',(#277179,#277182)); +#277179 = SURFACE_STYLE_FILL_AREA(#277180); +#277180 = FILL_AREA_STYLE('',(#277181)); +#277181 = FILL_AREA_STYLE_COLOUR('',#270350); +#277182 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277183)); +#277183 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277184 = STYLED_ITEM('color',(#277185),#234501); +#277185 = PRESENTATION_STYLE_ASSIGNMENT((#277186)); +#277186 = SURFACE_STYLE_USAGE(.BOTH.,#277187); +#277187 = SURFACE_SIDE_STYLE('',(#277188,#277191)); +#277188 = SURFACE_STYLE_FILL_AREA(#277189); +#277189 = FILL_AREA_STYLE('',(#277190)); +#277190 = FILL_AREA_STYLE_COLOUR('',#270350); +#277191 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277192)); +#277192 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277193 = STYLED_ITEM('color',(#277194),#234627); +#277194 = PRESENTATION_STYLE_ASSIGNMENT((#277195)); +#277195 = SURFACE_STYLE_USAGE(.BOTH.,#277196); +#277196 = SURFACE_SIDE_STYLE('',(#277197,#277200)); +#277197 = SURFACE_STYLE_FILL_AREA(#277198); +#277198 = FILL_AREA_STYLE('',(#277199)); +#277199 = FILL_AREA_STYLE_COLOUR('',#270350); +#277200 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277201)); +#277201 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277202 = STYLED_ITEM('color',(#277203),#234876); +#277203 = PRESENTATION_STYLE_ASSIGNMENT((#277204)); +#277204 = SURFACE_STYLE_USAGE(.BOTH.,#277205); +#277205 = SURFACE_SIDE_STYLE('',(#277206,#277209)); +#277206 = SURFACE_STYLE_FILL_AREA(#277207); +#277207 = FILL_AREA_STYLE('',(#277208)); +#277208 = FILL_AREA_STYLE_COLOUR('',#270350); +#277209 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277210)); +#277210 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277211 = STYLED_ITEM('color',(#277212),#235038); +#277212 = PRESENTATION_STYLE_ASSIGNMENT((#277213)); +#277213 = SURFACE_STYLE_USAGE(.BOTH.,#277214); +#277214 = SURFACE_SIDE_STYLE('',(#277215,#277218)); +#277215 = SURFACE_STYLE_FILL_AREA(#277216); +#277216 = FILL_AREA_STYLE('',(#277217)); +#277217 = FILL_AREA_STYLE_COLOUR('',#270350); +#277218 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277219)); +#277219 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277220 = STYLED_ITEM('color',(#277221),#235115); +#277221 = PRESENTATION_STYLE_ASSIGNMENT((#277222)); +#277222 = SURFACE_STYLE_USAGE(.BOTH.,#277223); +#277223 = SURFACE_SIDE_STYLE('',(#277224,#277227)); +#277224 = SURFACE_STYLE_FILL_AREA(#277225); +#277225 = FILL_AREA_STYLE('',(#277226)); +#277226 = FILL_AREA_STYLE_COLOUR('',#270350); +#277227 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277228)); +#277228 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277229 = STYLED_ITEM('color',(#277230),#235200); +#277230 = PRESENTATION_STYLE_ASSIGNMENT((#277231)); +#277231 = SURFACE_STYLE_USAGE(.BOTH.,#277232); +#277232 = SURFACE_SIDE_STYLE('',(#277233,#277236)); +#277233 = SURFACE_STYLE_FILL_AREA(#277234); +#277234 = FILL_AREA_STYLE('',(#277235)); +#277235 = FILL_AREA_STYLE_COLOUR('',#270350); +#277236 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277237)); +#277237 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277238 = STYLED_ITEM('color',(#277239),#235285); +#277239 = PRESENTATION_STYLE_ASSIGNMENT((#277240)); +#277240 = SURFACE_STYLE_USAGE(.BOTH.,#277241); +#277241 = SURFACE_SIDE_STYLE('',(#277242,#277245)); +#277242 = SURFACE_STYLE_FILL_AREA(#277243); +#277243 = FILL_AREA_STYLE('',(#277244)); +#277244 = FILL_AREA_STYLE_COLOUR('',#270350); +#277245 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277246)); +#277246 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277247 = STYLED_ITEM('color',(#277248),#235453); +#277248 = PRESENTATION_STYLE_ASSIGNMENT((#277249)); +#277249 = SURFACE_STYLE_USAGE(.BOTH.,#277250); +#277250 = SURFACE_SIDE_STYLE('',(#277251,#277254)); +#277251 = SURFACE_STYLE_FILL_AREA(#277252); +#277252 = FILL_AREA_STYLE('',(#277253)); +#277253 = FILL_AREA_STYLE_COLOUR('',#270350); +#277254 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277255)); +#277255 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277256 = STYLED_ITEM('color',(#277257),#235733); +#277257 = PRESENTATION_STYLE_ASSIGNMENT((#277258)); +#277258 = SURFACE_STYLE_USAGE(.BOTH.,#277259); +#277259 = SURFACE_SIDE_STYLE('',(#277260,#277263)); +#277260 = SURFACE_STYLE_FILL_AREA(#277261); +#277261 = FILL_AREA_STYLE('',(#277262)); +#277262 = FILL_AREA_STYLE_COLOUR('',#270350); +#277263 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277264)); +#277264 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277265 = STYLED_ITEM('color',(#277266),#235911); +#277266 = PRESENTATION_STYLE_ASSIGNMENT((#277267)); +#277267 = SURFACE_STYLE_USAGE(.BOTH.,#277268); +#277268 = SURFACE_SIDE_STYLE('',(#277269,#277272)); +#277269 = SURFACE_STYLE_FILL_AREA(#277270); +#277270 = FILL_AREA_STYLE('',(#277271)); +#277271 = FILL_AREA_STYLE_COLOUR('',#270350); +#277272 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277273)); +#277273 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277274 = STYLED_ITEM('color',(#277275),#235963); +#277275 = PRESENTATION_STYLE_ASSIGNMENT((#277276)); +#277276 = SURFACE_STYLE_USAGE(.BOTH.,#277277); +#277277 = SURFACE_SIDE_STYLE('',(#277278,#277281)); +#277278 = SURFACE_STYLE_FILL_AREA(#277279); +#277279 = FILL_AREA_STYLE('',(#277280)); +#277280 = FILL_AREA_STYLE_COLOUR('',#270350); +#277281 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277282)); +#277282 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277283 = STYLED_ITEM('color',(#277284),#236015); +#277284 = PRESENTATION_STYLE_ASSIGNMENT((#277285)); +#277285 = SURFACE_STYLE_USAGE(.BOTH.,#277286); +#277286 = SURFACE_SIDE_STYLE('',(#277287,#277290)); +#277287 = SURFACE_STYLE_FILL_AREA(#277288); +#277288 = FILL_AREA_STYLE('',(#277289)); +#277289 = FILL_AREA_STYLE_COLOUR('',#270350); +#277290 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277291)); +#277291 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277292 = STYLED_ITEM('color',(#277293),#236067); +#277293 = PRESENTATION_STYLE_ASSIGNMENT((#277294)); +#277294 = SURFACE_STYLE_USAGE(.BOTH.,#277295); +#277295 = SURFACE_SIDE_STYLE('',(#277296,#277299)); +#277296 = SURFACE_STYLE_FILL_AREA(#277297); +#277297 = FILL_AREA_STYLE('',(#277298)); +#277298 = FILL_AREA_STYLE_COLOUR('',#270350); +#277299 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277300)); +#277300 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277301 = STYLED_ITEM('color',(#277302),#236152); +#277302 = PRESENTATION_STYLE_ASSIGNMENT((#277303)); +#277303 = SURFACE_STYLE_USAGE(.BOTH.,#277304); +#277304 = SURFACE_SIDE_STYLE('',(#277305,#277308)); +#277305 = SURFACE_STYLE_FILL_AREA(#277306); +#277306 = FILL_AREA_STYLE('',(#277307)); +#277307 = FILL_AREA_STYLE_COLOUR('',#270350); +#277308 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277309)); +#277309 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277310 = STYLED_ITEM('color',(#277311),#236353); +#277311 = PRESENTATION_STYLE_ASSIGNMENT((#277312)); +#277312 = SURFACE_STYLE_USAGE(.BOTH.,#277313); +#277313 = SURFACE_SIDE_STYLE('',(#277314,#277317)); +#277314 = SURFACE_STYLE_FILL_AREA(#277315); +#277315 = FILL_AREA_STYLE('',(#277316)); +#277316 = FILL_AREA_STYLE_COLOUR('',#270350); +#277317 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277318)); +#277318 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277319 = STYLED_ITEM('color',(#277320),#236405); +#277320 = PRESENTATION_STYLE_ASSIGNMENT((#277321)); +#277321 = SURFACE_STYLE_USAGE(.BOTH.,#277322); +#277322 = SURFACE_SIDE_STYLE('',(#277323,#277326)); +#277323 = SURFACE_STYLE_FILL_AREA(#277324); +#277324 = FILL_AREA_STYLE('',(#277325)); +#277325 = FILL_AREA_STYLE_COLOUR('',#270350); +#277326 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277327)); +#277327 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277328 = STYLED_ITEM('color',(#277329),#236508); +#277329 = PRESENTATION_STYLE_ASSIGNMENT((#277330)); +#277330 = SURFACE_STYLE_USAGE(.BOTH.,#277331); +#277331 = SURFACE_SIDE_STYLE('',(#277332,#277335)); +#277332 = SURFACE_STYLE_FILL_AREA(#277333); +#277333 = FILL_AREA_STYLE('',(#277334)); +#277334 = FILL_AREA_STYLE_COLOUR('',#270350); +#277335 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277336)); +#277336 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277337 = STYLED_ITEM('color',(#277338),#236593); +#277338 = PRESENTATION_STYLE_ASSIGNMENT((#277339)); +#277339 = SURFACE_STYLE_USAGE(.BOTH.,#277340); +#277340 = SURFACE_SIDE_STYLE('',(#277341,#277344)); +#277341 = SURFACE_STYLE_FILL_AREA(#277342); +#277342 = FILL_AREA_STYLE('',(#277343)); +#277343 = FILL_AREA_STYLE_COLOUR('',#270350); +#277344 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277345)); +#277345 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277346 = STYLED_ITEM('color',(#277347),#236760); +#277347 = PRESENTATION_STYLE_ASSIGNMENT((#277348)); +#277348 = SURFACE_STYLE_USAGE(.BOTH.,#277349); +#277349 = SURFACE_SIDE_STYLE('',(#277350,#277353)); +#277350 = SURFACE_STYLE_FILL_AREA(#277351); +#277351 = FILL_AREA_STYLE('',(#277352)); +#277352 = FILL_AREA_STYLE_COLOUR('',#270350); +#277353 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277354)); +#277354 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277355 = STYLED_ITEM('color',(#277356),#236854); +#277356 = PRESENTATION_STYLE_ASSIGNMENT((#277357)); +#277357 = SURFACE_STYLE_USAGE(.BOTH.,#277358); +#277358 = SURFACE_SIDE_STYLE('',(#277359,#277362)); +#277359 = SURFACE_STYLE_FILL_AREA(#277360); +#277360 = FILL_AREA_STYLE('',(#277361)); +#277361 = FILL_AREA_STYLE_COLOUR('',#270350); +#277362 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277363)); +#277363 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277364 = STYLED_ITEM('color',(#277365),#236989); +#277365 = PRESENTATION_STYLE_ASSIGNMENT((#277366)); +#277366 = SURFACE_STYLE_USAGE(.BOTH.,#277367); +#277367 = SURFACE_SIDE_STYLE('',(#277368,#277371)); +#277368 = SURFACE_STYLE_FILL_AREA(#277369); +#277369 = FILL_AREA_STYLE('',(#277370)); +#277370 = FILL_AREA_STYLE_COLOUR('',#270350); +#277371 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277372)); +#277372 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277373 = STYLED_ITEM('color',(#277374),#237198); +#277374 = PRESENTATION_STYLE_ASSIGNMENT((#277375)); +#277375 = SURFACE_STYLE_USAGE(.BOTH.,#277376); +#277376 = SURFACE_SIDE_STYLE('',(#277377,#277380)); +#277377 = SURFACE_STYLE_FILL_AREA(#277378); +#277378 = FILL_AREA_STYLE('',(#277379)); +#277379 = FILL_AREA_STYLE_COLOUR('',#270350); +#277380 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277381)); +#277381 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277382 = STYLED_ITEM('color',(#277383),#237392); +#277383 = PRESENTATION_STYLE_ASSIGNMENT((#277384)); +#277384 = SURFACE_STYLE_USAGE(.BOTH.,#277385); +#277385 = SURFACE_SIDE_STYLE('',(#277386,#277389)); +#277386 = SURFACE_STYLE_FILL_AREA(#277387); +#277387 = FILL_AREA_STYLE('',(#277388)); +#277388 = FILL_AREA_STYLE_COLOUR('',#270350); +#277389 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277390)); +#277390 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277391 = STYLED_ITEM('color',(#277392),#237570); +#277392 = PRESENTATION_STYLE_ASSIGNMENT((#277393)); +#277393 = SURFACE_STYLE_USAGE(.BOTH.,#277394); +#277394 = SURFACE_SIDE_STYLE('',(#277395,#277398)); +#277395 = SURFACE_STYLE_FILL_AREA(#277396); +#277396 = FILL_AREA_STYLE('',(#277397)); +#277397 = FILL_AREA_STYLE_COLOUR('',#270350); +#277398 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277399)); +#277399 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277400 = STYLED_ITEM('color',(#277401),#237688); +#277401 = PRESENTATION_STYLE_ASSIGNMENT((#277402)); +#277402 = SURFACE_STYLE_USAGE(.BOTH.,#277403); +#277403 = SURFACE_SIDE_STYLE('',(#277404,#277407)); +#277404 = SURFACE_STYLE_FILL_AREA(#277405); +#277405 = FILL_AREA_STYLE('',(#277406)); +#277406 = FILL_AREA_STYLE_COLOUR('',#270350); +#277407 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277408)); +#277408 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277409 = STYLED_ITEM('color',(#277410),#237823); +#277410 = PRESENTATION_STYLE_ASSIGNMENT((#277411)); +#277411 = SURFACE_STYLE_USAGE(.BOTH.,#277412); +#277412 = SURFACE_SIDE_STYLE('',(#277413,#277416)); +#277413 = SURFACE_STYLE_FILL_AREA(#277414); +#277414 = FILL_AREA_STYLE('',(#277415)); +#277415 = FILL_AREA_STYLE_COLOUR('',#270350); +#277416 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277417)); +#277417 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277418 = STYLED_ITEM('color',(#277419),#237908); +#277419 = PRESENTATION_STYLE_ASSIGNMENT((#277420)); +#277420 = SURFACE_STYLE_USAGE(.BOTH.,#277421); +#277421 = SURFACE_SIDE_STYLE('',(#277422,#277425)); +#277422 = SURFACE_STYLE_FILL_AREA(#277423); +#277423 = FILL_AREA_STYLE('',(#277424)); +#277424 = FILL_AREA_STYLE_COLOUR('',#270350); +#277425 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277426)); +#277426 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277427 = STYLED_ITEM('color',(#277428),#238020); +#277428 = PRESENTATION_STYLE_ASSIGNMENT((#277429)); +#277429 = SURFACE_STYLE_USAGE(.BOTH.,#277430); +#277430 = SURFACE_SIDE_STYLE('',(#277431,#277434)); +#277431 = SURFACE_STYLE_FILL_AREA(#277432); +#277432 = FILL_AREA_STYLE('',(#277433)); +#277433 = FILL_AREA_STYLE_COLOUR('',#270350); +#277434 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277435)); +#277435 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277436 = STYLED_ITEM('color',(#277437),#238114); +#277437 = PRESENTATION_STYLE_ASSIGNMENT((#277438)); +#277438 = SURFACE_STYLE_USAGE(.BOTH.,#277439); +#277439 = SURFACE_SIDE_STYLE('',(#277440,#277443)); +#277440 = SURFACE_STYLE_FILL_AREA(#277441); +#277441 = FILL_AREA_STYLE('',(#277442)); +#277442 = FILL_AREA_STYLE_COLOUR('',#270350); +#277443 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277444)); +#277444 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277445 = STYLED_ITEM('color',(#277446),#238394); +#277446 = PRESENTATION_STYLE_ASSIGNMENT((#277447)); +#277447 = SURFACE_STYLE_USAGE(.BOTH.,#277448); +#277448 = SURFACE_SIDE_STYLE('',(#277449,#277452)); +#277449 = SURFACE_STYLE_FILL_AREA(#277450); +#277450 = FILL_AREA_STYLE('',(#277451)); +#277451 = FILL_AREA_STYLE_COLOUR('',#270350); +#277452 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277453)); +#277453 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277454 = STYLED_ITEM('color',(#277455),#238674); +#277455 = PRESENTATION_STYLE_ASSIGNMENT((#277456)); +#277456 = SURFACE_STYLE_USAGE(.BOTH.,#277457); +#277457 = SURFACE_SIDE_STYLE('',(#277458,#277461)); +#277458 = SURFACE_STYLE_FILL_AREA(#277459); +#277459 = FILL_AREA_STYLE('',(#277460)); +#277460 = FILL_AREA_STYLE_COLOUR('',#270350); +#277461 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277462)); +#277462 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277463 = STYLED_ITEM('color',(#277464),#238852); +#277464 = PRESENTATION_STYLE_ASSIGNMENT((#277465)); +#277465 = SURFACE_STYLE_USAGE(.BOTH.,#277466); +#277466 = SURFACE_SIDE_STYLE('',(#277467,#277470)); +#277467 = SURFACE_STYLE_FILL_AREA(#277468); +#277468 = FILL_AREA_STYLE('',(#277469)); +#277469 = FILL_AREA_STYLE_COLOUR('',#270350); +#277470 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277471)); +#277471 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277472 = STYLED_ITEM('color',(#277473),#238937); +#277473 = PRESENTATION_STYLE_ASSIGNMENT((#277474)); +#277474 = SURFACE_STYLE_USAGE(.BOTH.,#277475); +#277475 = SURFACE_SIDE_STYLE('',(#277476,#277479)); +#277476 = SURFACE_STYLE_FILL_AREA(#277477); +#277477 = FILL_AREA_STYLE('',(#277478)); +#277478 = FILL_AREA_STYLE_COLOUR('',#270350); +#277479 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277480)); +#277480 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277481 = STYLED_ITEM('color',(#277482),#239138); +#277482 = PRESENTATION_STYLE_ASSIGNMENT((#277483)); +#277483 = SURFACE_STYLE_USAGE(.BOTH.,#277484); +#277484 = SURFACE_SIDE_STYLE('',(#277485,#277488)); +#277485 = SURFACE_STYLE_FILL_AREA(#277486); +#277486 = FILL_AREA_STYLE('',(#277487)); +#277487 = FILL_AREA_STYLE_COLOUR('',#270350); +#277488 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277489)); +#277489 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277490 = STYLED_ITEM('color',(#277491),#239322); +#277491 = PRESENTATION_STYLE_ASSIGNMENT((#277492)); +#277492 = SURFACE_STYLE_USAGE(.BOTH.,#277493); +#277493 = SURFACE_SIDE_STYLE('',(#277494,#277497)); +#277494 = SURFACE_STYLE_FILL_AREA(#277495); +#277495 = FILL_AREA_STYLE('',(#277496)); +#277496 = FILL_AREA_STYLE_COLOUR('',#270350); +#277497 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277498)); +#277498 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277499 = STYLED_ITEM('color',(#277500),#239399); +#277500 = PRESENTATION_STYLE_ASSIGNMENT((#277501)); +#277501 = SURFACE_STYLE_USAGE(.BOTH.,#277502); +#277502 = SURFACE_SIDE_STYLE('',(#277503,#277506)); +#277503 = SURFACE_STYLE_FILL_AREA(#277504); +#277504 = FILL_AREA_STYLE('',(#277505)); +#277505 = FILL_AREA_STYLE_COLOUR('',#270350); +#277506 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277507)); +#277507 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277508 = STYLED_ITEM('color',(#277509),#239523); +#277509 = PRESENTATION_STYLE_ASSIGNMENT((#277510)); +#277510 = SURFACE_STYLE_USAGE(.BOTH.,#277511); +#277511 = SURFACE_SIDE_STYLE('',(#277512,#277515)); +#277512 = SURFACE_STYLE_FILL_AREA(#277513); +#277513 = FILL_AREA_STYLE('',(#277514)); +#277514 = FILL_AREA_STYLE_COLOUR('',#270350); +#277515 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277516)); +#277516 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277517 = STYLED_ITEM('color',(#277518),#239567); +#277518 = PRESENTATION_STYLE_ASSIGNMENT((#277519)); +#277519 = SURFACE_STYLE_USAGE(.BOTH.,#277520); +#277520 = SURFACE_SIDE_STYLE('',(#277521,#277524)); +#277521 = SURFACE_STYLE_FILL_AREA(#277522); +#277522 = FILL_AREA_STYLE('',(#277523)); +#277523 = FILL_AREA_STYLE_COLOUR('',#270350); +#277524 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277525)); +#277525 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277526 = STYLED_ITEM('color',(#277527),#239652); +#277527 = PRESENTATION_STYLE_ASSIGNMENT((#277528)); +#277528 = SURFACE_STYLE_USAGE(.BOTH.,#277529); +#277529 = SURFACE_SIDE_STYLE('',(#277530,#277533)); +#277530 = SURFACE_STYLE_FILL_AREA(#277531); +#277531 = FILL_AREA_STYLE('',(#277532)); +#277532 = FILL_AREA_STYLE_COLOUR('',#270350); +#277533 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277534)); +#277534 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277535 = STYLED_ITEM('color',(#277536),#239818); +#277536 = PRESENTATION_STYLE_ASSIGNMENT((#277537)); +#277537 = SURFACE_STYLE_USAGE(.BOTH.,#277538); +#277538 = SURFACE_SIDE_STYLE('',(#277539,#277542)); +#277539 = SURFACE_STYLE_FILL_AREA(#277540); +#277540 = FILL_AREA_STYLE('',(#277541)); +#277541 = FILL_AREA_STYLE_COLOUR('',#270350); +#277542 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277543)); +#277543 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277544 = STYLED_ITEM('color',(#277545),#239951); +#277545 = PRESENTATION_STYLE_ASSIGNMENT((#277546)); +#277546 = SURFACE_STYLE_USAGE(.BOTH.,#277547); +#277547 = SURFACE_SIDE_STYLE('',(#277548,#277551)); +#277548 = SURFACE_STYLE_FILL_AREA(#277549); +#277549 = FILL_AREA_STYLE('',(#277550)); +#277550 = FILL_AREA_STYLE_COLOUR('',#270350); +#277551 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277552)); +#277552 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277553 = STYLED_ITEM('color',(#277554),#240061); +#277554 = PRESENTATION_STYLE_ASSIGNMENT((#277555)); +#277555 = SURFACE_STYLE_USAGE(.BOTH.,#277556); +#277556 = SURFACE_SIDE_STYLE('',(#277557,#277560)); +#277557 = SURFACE_STYLE_FILL_AREA(#277558); +#277558 = FILL_AREA_STYLE('',(#277559)); +#277559 = FILL_AREA_STYLE_COLOUR('',#270350); +#277560 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277561)); +#277561 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277562 = STYLED_ITEM('color',(#277563),#240341); +#277563 = PRESENTATION_STYLE_ASSIGNMENT((#277564)); +#277564 = SURFACE_STYLE_USAGE(.BOTH.,#277565); +#277565 = SURFACE_SIDE_STYLE('',(#277566,#277569)); +#277566 = SURFACE_STYLE_FILL_AREA(#277567); +#277567 = FILL_AREA_STYLE('',(#277568)); +#277568 = FILL_AREA_STYLE_COLOUR('',#270350); +#277569 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277570)); +#277570 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277571 = STYLED_ITEM('color',(#277572),#240460); +#277572 = PRESENTATION_STYLE_ASSIGNMENT((#277573)); +#277573 = SURFACE_STYLE_USAGE(.BOTH.,#277574); +#277574 = SURFACE_SIDE_STYLE('',(#277575,#277578)); +#277575 = SURFACE_STYLE_FILL_AREA(#277576); +#277576 = FILL_AREA_STYLE('',(#277577)); +#277577 = FILL_AREA_STYLE_COLOUR('',#270350); +#277578 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277579)); +#277579 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277580 = STYLED_ITEM('color',(#277581),#240504); +#277581 = PRESENTATION_STYLE_ASSIGNMENT((#277582)); +#277582 = SURFACE_STYLE_USAGE(.BOTH.,#277583); +#277583 = SURFACE_SIDE_STYLE('',(#277584,#277587)); +#277584 = SURFACE_STYLE_FILL_AREA(#277585); +#277585 = FILL_AREA_STYLE('',(#277586)); +#277586 = FILL_AREA_STYLE_COLOUR('',#270350); +#277587 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277588)); +#277588 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277589 = STYLED_ITEM('color',(#277590),#240696); +#277590 = PRESENTATION_STYLE_ASSIGNMENT((#277591)); +#277591 = SURFACE_STYLE_USAGE(.BOTH.,#277592); +#277592 = SURFACE_SIDE_STYLE('',(#277593,#277596)); +#277593 = SURFACE_STYLE_FILL_AREA(#277594); +#277594 = FILL_AREA_STYLE('',(#277595)); +#277595 = FILL_AREA_STYLE_COLOUR('',#270350); +#277596 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277597)); +#277597 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277598 = STYLED_ITEM('color',(#277599),#240806); +#277599 = PRESENTATION_STYLE_ASSIGNMENT((#277600)); +#277600 = SURFACE_STYLE_USAGE(.BOTH.,#277601); +#277601 = SURFACE_SIDE_STYLE('',(#277602,#277605)); +#277602 = SURFACE_STYLE_FILL_AREA(#277603); +#277603 = FILL_AREA_STYLE('',(#277604)); +#277604 = FILL_AREA_STYLE_COLOUR('',#270350); +#277605 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277606)); +#277606 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277607 = STYLED_ITEM('color',(#277608),#240874); +#277608 = PRESENTATION_STYLE_ASSIGNMENT((#277609)); +#277609 = SURFACE_STYLE_USAGE(.BOTH.,#277610); +#277610 = SURFACE_SIDE_STYLE('',(#277611,#277614)); +#277611 = SURFACE_STYLE_FILL_AREA(#277612); +#277612 = FILL_AREA_STYLE('',(#277613)); +#277613 = FILL_AREA_STYLE_COLOUR('',#270350); +#277614 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277615)); +#277615 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277616 = STYLED_ITEM('color',(#277617),#240943); +#277617 = PRESENTATION_STYLE_ASSIGNMENT((#277618)); +#277618 = SURFACE_STYLE_USAGE(.BOTH.,#277619); +#277619 = SURFACE_SIDE_STYLE('',(#277620,#277623)); +#277620 = SURFACE_STYLE_FILL_AREA(#277621); +#277621 = FILL_AREA_STYLE('',(#277622)); +#277622 = FILL_AREA_STYLE_COLOUR('',#270350); +#277623 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277624)); +#277624 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277625 = STYLED_ITEM('color',(#277626),#241121); +#277626 = PRESENTATION_STYLE_ASSIGNMENT((#277627)); +#277627 = SURFACE_STYLE_USAGE(.BOTH.,#277628); +#277628 = SURFACE_SIDE_STYLE('',(#277629,#277632)); +#277629 = SURFACE_STYLE_FILL_AREA(#277630); +#277630 = FILL_AREA_STYLE('',(#277631)); +#277631 = FILL_AREA_STYLE_COLOUR('',#270350); +#277632 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277633)); +#277633 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277634 = STYLED_ITEM('color',(#277635),#241165); +#277635 = PRESENTATION_STYLE_ASSIGNMENT((#277636)); +#277636 = SURFACE_STYLE_USAGE(.BOTH.,#277637); +#277637 = SURFACE_SIDE_STYLE('',(#277638,#277641)); +#277638 = SURFACE_STYLE_FILL_AREA(#277639); +#277639 = FILL_AREA_STYLE('',(#277640)); +#277640 = FILL_AREA_STYLE_COLOUR('',#270350); +#277641 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277642)); +#277642 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277643 = STYLED_ITEM('color',(#277644),#241209); +#277644 = PRESENTATION_STYLE_ASSIGNMENT((#277645)); +#277645 = SURFACE_STYLE_USAGE(.BOTH.,#277646); +#277646 = SURFACE_SIDE_STYLE('',(#277647,#277650)); +#277647 = SURFACE_STYLE_FILL_AREA(#277648); +#277648 = FILL_AREA_STYLE('',(#277649)); +#277649 = FILL_AREA_STYLE_COLOUR('',#270350); +#277650 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277651)); +#277651 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277652 = STYLED_ITEM('color',(#277653),#241539); +#277653 = PRESENTATION_STYLE_ASSIGNMENT((#277654)); +#277654 = SURFACE_STYLE_USAGE(.BOTH.,#277655); +#277655 = SURFACE_SIDE_STYLE('',(#277656,#277659)); +#277656 = SURFACE_STYLE_FILL_AREA(#277657); +#277657 = FILL_AREA_STYLE('',(#277658)); +#277658 = FILL_AREA_STYLE_COLOUR('',#270350); +#277659 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277660)); +#277660 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277661 = STYLED_ITEM('color',(#277662),#241681); +#277662 = PRESENTATION_STYLE_ASSIGNMENT((#277663)); +#277663 = SURFACE_STYLE_USAGE(.BOTH.,#277664); +#277664 = SURFACE_SIDE_STYLE('',(#277665,#277668)); +#277665 = SURFACE_STYLE_FILL_AREA(#277666); +#277666 = FILL_AREA_STYLE('',(#277667)); +#277667 = FILL_AREA_STYLE_COLOUR('',#270350); +#277668 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277669)); +#277669 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277670 = STYLED_ITEM('color',(#277671),#241893); +#277671 = PRESENTATION_STYLE_ASSIGNMENT((#277672)); +#277672 = SURFACE_STYLE_USAGE(.BOTH.,#277673); +#277673 = SURFACE_SIDE_STYLE('',(#277674,#277677)); +#277674 = SURFACE_STYLE_FILL_AREA(#277675); +#277675 = FILL_AREA_STYLE('',(#277676)); +#277676 = FILL_AREA_STYLE_COLOUR('',#270350); +#277677 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277678)); +#277678 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277679 = STYLED_ITEM('color',(#277680),#242035); +#277680 = PRESENTATION_STYLE_ASSIGNMENT((#277681)); +#277681 = SURFACE_STYLE_USAGE(.BOTH.,#277682); +#277682 = SURFACE_SIDE_STYLE('',(#277683,#277686)); +#277683 = SURFACE_STYLE_FILL_AREA(#277684); +#277684 = FILL_AREA_STYLE('',(#277685)); +#277685 = FILL_AREA_STYLE_COLOUR('',#270350); +#277686 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277687)); +#277687 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277688 = STYLED_ITEM('color',(#277689),#242177); +#277689 = PRESENTATION_STYLE_ASSIGNMENT((#277690)); +#277690 = SURFACE_STYLE_USAGE(.BOTH.,#277691); +#277691 = SURFACE_SIDE_STYLE('',(#277692,#277695)); +#277692 = SURFACE_STYLE_FILL_AREA(#277693); +#277693 = FILL_AREA_STYLE('',(#277694)); +#277694 = FILL_AREA_STYLE_COLOUR('',#270350); +#277695 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277696)); +#277696 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277697 = STYLED_ITEM('color',(#277698),#242370); +#277698 = PRESENTATION_STYLE_ASSIGNMENT((#277699)); +#277699 = SURFACE_STYLE_USAGE(.BOTH.,#277700); +#277700 = SURFACE_SIDE_STYLE('',(#277701,#277704)); +#277701 = SURFACE_STYLE_FILL_AREA(#277702); +#277702 = FILL_AREA_STYLE('',(#277703)); +#277703 = FILL_AREA_STYLE_COLOUR('',#270350); +#277704 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277705)); +#277705 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277706 = STYLED_ITEM('color',(#277707),#242464); +#277707 = PRESENTATION_STYLE_ASSIGNMENT((#277708)); +#277708 = SURFACE_STYLE_USAGE(.BOTH.,#277709); +#277709 = SURFACE_SIDE_STYLE('',(#277710,#277713)); +#277710 = SURFACE_STYLE_FILL_AREA(#277711); +#277711 = FILL_AREA_STYLE('',(#277712)); +#277712 = FILL_AREA_STYLE_COLOUR('',#270350); +#277713 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277714)); +#277714 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277715 = STYLED_ITEM('color',(#277716),#242549); +#277716 = PRESENTATION_STYLE_ASSIGNMENT((#277717)); +#277717 = SURFACE_STYLE_USAGE(.BOTH.,#277718); +#277718 = SURFACE_SIDE_STYLE('',(#277719,#277722)); +#277719 = SURFACE_STYLE_FILL_AREA(#277720); +#277720 = FILL_AREA_STYLE('',(#277721)); +#277721 = FILL_AREA_STYLE_COLOUR('',#270350); +#277722 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277723)); +#277723 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277724 = STYLED_ITEM('color',(#277725),#242742); +#277725 = PRESENTATION_STYLE_ASSIGNMENT((#277726)); +#277726 = SURFACE_STYLE_USAGE(.BOTH.,#277727); +#277727 = SURFACE_SIDE_STYLE('',(#277728,#277731)); +#277728 = SURFACE_STYLE_FILL_AREA(#277729); +#277729 = FILL_AREA_STYLE('',(#277730)); +#277730 = FILL_AREA_STYLE_COLOUR('',#270350); +#277731 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277732)); +#277732 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277733 = STYLED_ITEM('color',(#277734),#242936); +#277734 = PRESENTATION_STYLE_ASSIGNMENT((#277735)); +#277735 = SURFACE_STYLE_USAGE(.BOTH.,#277736); +#277736 = SURFACE_SIDE_STYLE('',(#277737,#277740)); +#277737 = SURFACE_STYLE_FILL_AREA(#277738); +#277738 = FILL_AREA_STYLE('',(#277739)); +#277739 = FILL_AREA_STYLE_COLOUR('',#270350); +#277740 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277741)); +#277741 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277742 = STYLED_ITEM('color',(#277743),#243087); +#277743 = PRESENTATION_STYLE_ASSIGNMENT((#277744)); +#277744 = SURFACE_STYLE_USAGE(.BOTH.,#277745); +#277745 = SURFACE_SIDE_STYLE('',(#277746,#277749)); +#277746 = SURFACE_STYLE_FILL_AREA(#277747); +#277747 = FILL_AREA_STYLE('',(#277748)); +#277748 = FILL_AREA_STYLE_COLOUR('',#270350); +#277749 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277750)); +#277750 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277751 = STYLED_ITEM('color',(#277752),#243213); +#277752 = PRESENTATION_STYLE_ASSIGNMENT((#277753)); +#277753 = SURFACE_STYLE_USAGE(.BOTH.,#277754); +#277754 = SURFACE_SIDE_STYLE('',(#277755,#277758)); +#277755 = SURFACE_STYLE_FILL_AREA(#277756); +#277756 = FILL_AREA_STYLE('',(#277757)); +#277757 = FILL_AREA_STYLE_COLOUR('',#270350); +#277758 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277759)); +#277759 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277760 = STYLED_ITEM('color',(#277761),#243380); +#277761 = PRESENTATION_STYLE_ASSIGNMENT((#277762)); +#277762 = SURFACE_STYLE_USAGE(.BOTH.,#277763); +#277763 = SURFACE_SIDE_STYLE('',(#277764,#277767)); +#277764 = SURFACE_STYLE_FILL_AREA(#277765); +#277765 = FILL_AREA_STYLE('',(#277766)); +#277766 = FILL_AREA_STYLE_COLOUR('',#270350); +#277767 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277768)); +#277768 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277769 = STYLED_ITEM('color',(#277770),#243524); +#277770 = PRESENTATION_STYLE_ASSIGNMENT((#277771)); +#277771 = SURFACE_STYLE_USAGE(.BOTH.,#277772); +#277772 = SURFACE_SIDE_STYLE('',(#277773,#277776)); +#277773 = SURFACE_STYLE_FILL_AREA(#277774); +#277774 = FILL_AREA_STYLE('',(#277775)); +#277775 = FILL_AREA_STYLE_COLOUR('',#270350); +#277776 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277777)); +#277777 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277778 = STYLED_ITEM('color',(#277779),#243972); +#277779 = PRESENTATION_STYLE_ASSIGNMENT((#277780)); +#277780 = SURFACE_STYLE_USAGE(.BOTH.,#277781); +#277781 = SURFACE_SIDE_STYLE('',(#277782,#277785)); +#277782 = SURFACE_STYLE_FILL_AREA(#277783); +#277783 = FILL_AREA_STYLE('',(#277784)); +#277784 = FILL_AREA_STYLE_COLOUR('',#270350); +#277785 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277786)); +#277786 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277787 = STYLED_ITEM('color',(#277788),#244453); +#277788 = PRESENTATION_STYLE_ASSIGNMENT((#277789)); +#277789 = SURFACE_STYLE_USAGE(.BOTH.,#277790); +#277790 = SURFACE_SIDE_STYLE('',(#277791,#277794)); +#277791 = SURFACE_STYLE_FILL_AREA(#277792); +#277792 = FILL_AREA_STYLE('',(#277793)); +#277793 = FILL_AREA_STYLE_COLOUR('',#270350); +#277794 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277795)); +#277795 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277796 = STYLED_ITEM('color',(#277797),#244901); +#277797 = PRESENTATION_STYLE_ASSIGNMENT((#277798)); +#277798 = SURFACE_STYLE_USAGE(.BOTH.,#277799); +#277799 = SURFACE_SIDE_STYLE('',(#277800,#277803)); +#277800 = SURFACE_STYLE_FILL_AREA(#277801); +#277801 = FILL_AREA_STYLE('',(#277802)); +#277802 = FILL_AREA_STYLE_COLOUR('',#270350); +#277803 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277804)); +#277804 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277805 = STYLED_ITEM('color',(#277806),#245349); +#277806 = PRESENTATION_STYLE_ASSIGNMENT((#277807)); +#277807 = SURFACE_STYLE_USAGE(.BOTH.,#277808); +#277808 = SURFACE_SIDE_STYLE('',(#277809,#277812)); +#277809 = SURFACE_STYLE_FILL_AREA(#277810); +#277810 = FILL_AREA_STYLE('',(#277811)); +#277811 = FILL_AREA_STYLE_COLOUR('',#270350); +#277812 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277813)); +#277813 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277814 = STYLED_ITEM('color',(#277815),#245500); +#277815 = PRESENTATION_STYLE_ASSIGNMENT((#277816)); +#277816 = SURFACE_STYLE_USAGE(.BOTH.,#277817); +#277817 = SURFACE_SIDE_STYLE('',(#277818,#277821)); +#277818 = SURFACE_STYLE_FILL_AREA(#277819); +#277819 = FILL_AREA_STYLE('',(#277820)); +#277820 = FILL_AREA_STYLE_COLOUR('',#270350); +#277821 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277822)); +#277822 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277823 = STYLED_ITEM('color',(#277824),#245626); +#277824 = PRESENTATION_STYLE_ASSIGNMENT((#277825)); +#277825 = SURFACE_STYLE_USAGE(.BOTH.,#277826); +#277826 = SURFACE_SIDE_STYLE('',(#277827,#277830)); +#277827 = SURFACE_STYLE_FILL_AREA(#277828); +#277828 = FILL_AREA_STYLE('',(#277829)); +#277829 = FILL_AREA_STYLE_COLOUR('',#270350); +#277830 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277831)); +#277831 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277832 = STYLED_ITEM('color',(#277833),#245768); +#277833 = PRESENTATION_STYLE_ASSIGNMENT((#277834)); +#277834 = SURFACE_STYLE_USAGE(.BOTH.,#277835); +#277835 = SURFACE_SIDE_STYLE('',(#277836,#277839)); +#277836 = SURFACE_STYLE_FILL_AREA(#277837); +#277837 = FILL_AREA_STYLE('',(#277838)); +#277838 = FILL_AREA_STYLE_COLOUR('',#270350); +#277839 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277840)); +#277840 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277841 = STYLED_ITEM('color',(#277842),#245925); +#277842 = PRESENTATION_STYLE_ASSIGNMENT((#277843)); +#277843 = SURFACE_STYLE_USAGE(.BOTH.,#277844); +#277844 = SURFACE_SIDE_STYLE('',(#277845,#277848)); +#277845 = SURFACE_STYLE_FILL_AREA(#277846); +#277846 = FILL_AREA_STYLE('',(#277847)); +#277847 = FILL_AREA_STYLE_COLOUR('',#270350); +#277848 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277849)); +#277849 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277850 = STYLED_ITEM('color',(#277851),#246087); +#277851 = PRESENTATION_STYLE_ASSIGNMENT((#277852)); +#277852 = SURFACE_STYLE_USAGE(.BOTH.,#277853); +#277853 = SURFACE_SIDE_STYLE('',(#277854,#277857)); +#277854 = SURFACE_STYLE_FILL_AREA(#277855); +#277855 = FILL_AREA_STYLE('',(#277856)); +#277856 = FILL_AREA_STYLE_COLOUR('',#270350); +#277857 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277858)); +#277858 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277859 = STYLED_ITEM('color',(#277860),#246139); +#277860 = PRESENTATION_STYLE_ASSIGNMENT((#277861)); +#277861 = SURFACE_STYLE_USAGE(.BOTH.,#277862); +#277862 = SURFACE_SIDE_STYLE('',(#277863,#277866)); +#277863 = SURFACE_STYLE_FILL_AREA(#277864); +#277864 = FILL_AREA_STYLE('',(#277865)); +#277865 = FILL_AREA_STYLE_COLOUR('',#270350); +#277866 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277867)); +#277867 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277868 = STYLED_ITEM('color',(#277869),#246191); +#277869 = PRESENTATION_STYLE_ASSIGNMENT((#277870)); +#277870 = SURFACE_STYLE_USAGE(.BOTH.,#277871); +#277871 = SURFACE_SIDE_STYLE('',(#277872,#277875)); +#277872 = SURFACE_STYLE_FILL_AREA(#277873); +#277873 = FILL_AREA_STYLE('',(#277874)); +#277874 = FILL_AREA_STYLE_COLOUR('',#270350); +#277875 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277876)); +#277876 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277877 = STYLED_ITEM('color',(#277878),#246235); +#277878 = PRESENTATION_STYLE_ASSIGNMENT((#277879)); +#277879 = SURFACE_STYLE_USAGE(.BOTH.,#277880); +#277880 = SURFACE_SIDE_STYLE('',(#277881,#277884)); +#277881 = SURFACE_STYLE_FILL_AREA(#277882); +#277882 = FILL_AREA_STYLE('',(#277883)); +#277883 = FILL_AREA_STYLE_COLOUR('',#270350); +#277884 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277885)); +#277885 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277886 = STYLED_ITEM('color',(#277887),#246279); +#277887 = PRESENTATION_STYLE_ASSIGNMENT((#277888)); +#277888 = SURFACE_STYLE_USAGE(.BOTH.,#277889); +#277889 = SURFACE_SIDE_STYLE('',(#277890,#277893)); +#277890 = SURFACE_STYLE_FILL_AREA(#277891); +#277891 = FILL_AREA_STYLE('',(#277892)); +#277892 = FILL_AREA_STYLE_COLOUR('',#270350); +#277893 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277894)); +#277894 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277895 = STYLED_ITEM('color',(#277896),#246323); +#277896 = PRESENTATION_STYLE_ASSIGNMENT((#277897)); +#277897 = SURFACE_STYLE_USAGE(.BOTH.,#277898); +#277898 = SURFACE_SIDE_STYLE('',(#277899,#277902)); +#277899 = SURFACE_STYLE_FILL_AREA(#277900); +#277900 = FILL_AREA_STYLE('',(#277901)); +#277901 = FILL_AREA_STYLE_COLOUR('',#270350); +#277902 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277903)); +#277903 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277904 = STYLED_ITEM('color',(#277905),#246367); +#277905 = PRESENTATION_STYLE_ASSIGNMENT((#277906)); +#277906 = SURFACE_STYLE_USAGE(.BOTH.,#277907); +#277907 = SURFACE_SIDE_STYLE('',(#277908,#277911)); +#277908 = SURFACE_STYLE_FILL_AREA(#277909); +#277909 = FILL_AREA_STYLE('',(#277910)); +#277910 = FILL_AREA_STYLE_COLOUR('',#270350); +#277911 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277912)); +#277912 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277913 = STYLED_ITEM('color',(#277914),#246576); +#277914 = PRESENTATION_STYLE_ASSIGNMENT((#277915)); +#277915 = SURFACE_STYLE_USAGE(.BOTH.,#277916); +#277916 = SURFACE_SIDE_STYLE('',(#277917,#277920)); +#277917 = SURFACE_STYLE_FILL_AREA(#277918); +#277918 = FILL_AREA_STYLE('',(#277919)); +#277919 = FILL_AREA_STYLE_COLOUR('',#270350); +#277920 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277921)); +#277921 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277922 = STYLED_ITEM('color',(#277923),#246620); +#277923 = PRESENTATION_STYLE_ASSIGNMENT((#277924)); +#277924 = SURFACE_STYLE_USAGE(.BOTH.,#277925); +#277925 = SURFACE_SIDE_STYLE('',(#277926,#277929)); +#277926 = SURFACE_STYLE_FILL_AREA(#277927); +#277927 = FILL_AREA_STYLE('',(#277928)); +#277928 = FILL_AREA_STYLE_COLOUR('',#270350); +#277929 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277930)); +#277930 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277931 = STYLED_ITEM('color',(#277932),#246664); +#277932 = PRESENTATION_STYLE_ASSIGNMENT((#277933)); +#277933 = SURFACE_STYLE_USAGE(.BOTH.,#277934); +#277934 = SURFACE_SIDE_STYLE('',(#277935,#277938)); +#277935 = SURFACE_STYLE_FILL_AREA(#277936); +#277936 = FILL_AREA_STYLE('',(#277937)); +#277937 = FILL_AREA_STYLE_COLOUR('',#270350); +#277938 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277939)); +#277939 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277940 = STYLED_ITEM('color',(#277941),#246708); +#277941 = PRESENTATION_STYLE_ASSIGNMENT((#277942)); +#277942 = SURFACE_STYLE_USAGE(.BOTH.,#277943); +#277943 = SURFACE_SIDE_STYLE('',(#277944,#277947)); +#277944 = SURFACE_STYLE_FILL_AREA(#277945); +#277945 = FILL_AREA_STYLE('',(#277946)); +#277946 = FILL_AREA_STYLE_COLOUR('',#270350); +#277947 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277948)); +#277948 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277949 = STYLED_ITEM('color',(#277950),#246752); +#277950 = PRESENTATION_STYLE_ASSIGNMENT((#277951)); +#277951 = SURFACE_STYLE_USAGE(.BOTH.,#277952); +#277952 = SURFACE_SIDE_STYLE('',(#277953,#277956)); +#277953 = SURFACE_STYLE_FILL_AREA(#277954); +#277954 = FILL_AREA_STYLE('',(#277955)); +#277955 = FILL_AREA_STYLE_COLOUR('',#270350); +#277956 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277957)); +#277957 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277958 = STYLED_ITEM('color',(#277959),#246796); +#277959 = PRESENTATION_STYLE_ASSIGNMENT((#277960)); +#277960 = SURFACE_STYLE_USAGE(.BOTH.,#277961); +#277961 = SURFACE_SIDE_STYLE('',(#277962,#277965)); +#277962 = SURFACE_STYLE_FILL_AREA(#277963); +#277963 = FILL_AREA_STYLE('',(#277964)); +#277964 = FILL_AREA_STYLE_COLOUR('',#270350); +#277965 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277966)); +#277966 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277967 = STYLED_ITEM('color',(#277968),#246938); +#277968 = PRESENTATION_STYLE_ASSIGNMENT((#277969)); +#277969 = SURFACE_STYLE_USAGE(.BOTH.,#277970); +#277970 = SURFACE_SIDE_STYLE('',(#277971,#277974)); +#277971 = SURFACE_STYLE_FILL_AREA(#277972); +#277972 = FILL_AREA_STYLE('',(#277973)); +#277973 = FILL_AREA_STYLE_COLOUR('',#270350); +#277974 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277975)); +#277975 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277976 = STYLED_ITEM('color',(#277977),#247105); +#277977 = PRESENTATION_STYLE_ASSIGNMENT((#277978)); +#277978 = SURFACE_STYLE_USAGE(.BOTH.,#277979); +#277979 = SURFACE_SIDE_STYLE('',(#277980,#277983)); +#277980 = SURFACE_STYLE_FILL_AREA(#277981); +#277981 = FILL_AREA_STYLE('',(#277982)); +#277982 = FILL_AREA_STYLE_COLOUR('',#270350); +#277983 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277984)); +#277984 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277985 = STYLED_ITEM('color',(#277986),#247276); +#277986 = PRESENTATION_STYLE_ASSIGNMENT((#277987)); +#277987 = SURFACE_STYLE_USAGE(.BOTH.,#277988); +#277988 = SURFACE_SIDE_STYLE('',(#277989,#277992)); +#277989 = SURFACE_STYLE_FILL_AREA(#277990); +#277990 = FILL_AREA_STYLE('',(#277991)); +#277991 = FILL_AREA_STYLE_COLOUR('',#270350); +#277992 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#277993)); +#277993 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277994 = STYLED_ITEM('color',(#277995),#247447); +#277995 = PRESENTATION_STYLE_ASSIGNMENT((#277996)); +#277996 = SURFACE_STYLE_USAGE(.BOTH.,#277997); +#277997 = SURFACE_SIDE_STYLE('',(#277998,#278001)); +#277998 = SURFACE_STYLE_FILL_AREA(#277999); +#277999 = FILL_AREA_STYLE('',(#278000)); +#278000 = FILL_AREA_STYLE_COLOUR('',#270350); +#278001 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278002)); +#278002 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278003 = STYLED_ITEM('color',(#278004),#247618); +#278004 = PRESENTATION_STYLE_ASSIGNMENT((#278005)); +#278005 = SURFACE_STYLE_USAGE(.BOTH.,#278006); +#278006 = SURFACE_SIDE_STYLE('',(#278007,#278010)); +#278007 = SURFACE_STYLE_FILL_AREA(#278008); +#278008 = FILL_AREA_STYLE('',(#278009)); +#278009 = FILL_AREA_STYLE_COLOUR('',#270350); +#278010 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278011)); +#278011 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278012 = STYLED_ITEM('color',(#278013),#247789); +#278013 = PRESENTATION_STYLE_ASSIGNMENT((#278014)); +#278014 = SURFACE_STYLE_USAGE(.BOTH.,#278015); +#278015 = SURFACE_SIDE_STYLE('',(#278016,#278019)); +#278016 = SURFACE_STYLE_FILL_AREA(#278017); +#278017 = FILL_AREA_STYLE('',(#278018)); +#278018 = FILL_AREA_STYLE_COLOUR('',#270350); +#278019 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278020)); +#278020 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278021 = STYLED_ITEM('color',(#278022),#248034); +#278022 = PRESENTATION_STYLE_ASSIGNMENT((#278023)); +#278023 = SURFACE_STYLE_USAGE(.BOTH.,#278024); +#278024 = SURFACE_SIDE_STYLE('',(#278025,#278028)); +#278025 = SURFACE_STYLE_FILL_AREA(#278026); +#278026 = FILL_AREA_STYLE('',(#278027)); +#278027 = FILL_AREA_STYLE_COLOUR('',#270350); +#278028 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278029)); +#278029 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278030 = STYLED_ITEM('color',(#278031),#248279); +#278031 = PRESENTATION_STYLE_ASSIGNMENT((#278032)); +#278032 = SURFACE_STYLE_USAGE(.BOTH.,#278033); +#278033 = SURFACE_SIDE_STYLE('',(#278034,#278037)); +#278034 = SURFACE_STYLE_FILL_AREA(#278035); +#278035 = FILL_AREA_STYLE('',(#278036)); +#278036 = FILL_AREA_STYLE_COLOUR('',#270350); +#278037 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278038)); +#278038 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278039 = STYLED_ITEM('color',(#278040),#248524); +#278040 = PRESENTATION_STYLE_ASSIGNMENT((#278041)); +#278041 = SURFACE_STYLE_USAGE(.BOTH.,#278042); +#278042 = SURFACE_SIDE_STYLE('',(#278043,#278046)); +#278043 = SURFACE_STYLE_FILL_AREA(#278044); +#278044 = FILL_AREA_STYLE('',(#278045)); +#278045 = FILL_AREA_STYLE_COLOUR('',#270350); +#278046 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278047)); +#278047 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278048 = STYLED_ITEM('color',(#278049),#248718); +#278049 = PRESENTATION_STYLE_ASSIGNMENT((#278050)); +#278050 = SURFACE_STYLE_USAGE(.BOTH.,#278051); +#278051 = SURFACE_SIDE_STYLE('',(#278052,#278055)); +#278052 = SURFACE_STYLE_FILL_AREA(#278053); +#278053 = FILL_AREA_STYLE('',(#278054)); +#278054 = FILL_AREA_STYLE_COLOUR('',#270350); +#278055 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278056)); +#278056 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278057 = STYLED_ITEM('color',(#278058),#248963); +#278058 = PRESENTATION_STYLE_ASSIGNMENT((#278059)); +#278059 = SURFACE_STYLE_USAGE(.BOTH.,#278060); +#278060 = SURFACE_SIDE_STYLE('',(#278061,#278064)); +#278061 = SURFACE_STYLE_FILL_AREA(#278062); +#278062 = FILL_AREA_STYLE('',(#278063)); +#278063 = FILL_AREA_STYLE_COLOUR('',#270350); +#278064 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278065)); +#278065 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278066 = STYLED_ITEM('color',(#278067),#249106); +#278067 = PRESENTATION_STYLE_ASSIGNMENT((#278068)); +#278068 = SURFACE_STYLE_USAGE(.BOTH.,#278069); +#278069 = SURFACE_SIDE_STYLE('',(#278070,#278073)); +#278070 = SURFACE_STYLE_FILL_AREA(#278071); +#278071 = FILL_AREA_STYLE('',(#278072)); +#278072 = FILL_AREA_STYLE_COLOUR('',#270350); +#278073 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278074)); +#278074 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278075 = STYLED_ITEM('color',(#278076),#249344); +#278076 = PRESENTATION_STYLE_ASSIGNMENT((#278077)); +#278077 = SURFACE_STYLE_USAGE(.BOTH.,#278078); +#278078 = SURFACE_SIDE_STYLE('',(#278079,#278082)); +#278079 = SURFACE_STYLE_FILL_AREA(#278080); +#278080 = FILL_AREA_STYLE('',(#278081)); +#278081 = FILL_AREA_STYLE_COLOUR('',#270350); +#278082 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278083)); +#278083 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278084 = STYLED_ITEM('color',(#278085),#249537); +#278085 = PRESENTATION_STYLE_ASSIGNMENT((#278086)); +#278086 = SURFACE_STYLE_USAGE(.BOTH.,#278087); +#278087 = SURFACE_SIDE_STYLE('',(#278088,#278091)); +#278088 = SURFACE_STYLE_FILL_AREA(#278089); +#278089 = FILL_AREA_STYLE('',(#278090)); +#278090 = FILL_AREA_STYLE_COLOUR('',#270350); +#278091 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278092)); +#278092 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278093 = STYLED_ITEM('color',(#278094),#249606); +#278094 = PRESENTATION_STYLE_ASSIGNMENT((#278095)); +#278095 = SURFACE_STYLE_USAGE(.BOTH.,#278096); +#278096 = SURFACE_SIDE_STYLE('',(#278097,#278100)); +#278097 = SURFACE_STYLE_FILL_AREA(#278098); +#278098 = FILL_AREA_STYLE('',(#278099)); +#278099 = FILL_AREA_STYLE_COLOUR('',#270350); +#278100 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278101)); +#278101 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278102 = STYLED_ITEM('color',(#278103),#249658); +#278103 = PRESENTATION_STYLE_ASSIGNMENT((#278104)); +#278104 = SURFACE_STYLE_USAGE(.BOTH.,#278105); +#278105 = SURFACE_SIDE_STYLE('',(#278106,#278109)); +#278106 = SURFACE_STYLE_FILL_AREA(#278107); +#278107 = FILL_AREA_STYLE('',(#278108)); +#278108 = FILL_AREA_STYLE_COLOUR('',#270350); +#278109 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278110)); +#278110 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278111 = STYLED_ITEM('color',(#278112),#249710); +#278112 = PRESENTATION_STYLE_ASSIGNMENT((#278113)); +#278113 = SURFACE_STYLE_USAGE(.BOTH.,#278114); +#278114 = SURFACE_SIDE_STYLE('',(#278115,#278118)); +#278115 = SURFACE_STYLE_FILL_AREA(#278116); +#278116 = FILL_AREA_STYLE('',(#278117)); +#278117 = FILL_AREA_STYLE_COLOUR('',#270350); +#278118 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278119)); +#278119 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278120 = STYLED_ITEM('color',(#278121),#249754); +#278121 = PRESENTATION_STYLE_ASSIGNMENT((#278122)); +#278122 = SURFACE_STYLE_USAGE(.BOTH.,#278123); +#278123 = SURFACE_SIDE_STYLE('',(#278124,#278127)); +#278124 = SURFACE_STYLE_FILL_AREA(#278125); +#278125 = FILL_AREA_STYLE('',(#278126)); +#278126 = FILL_AREA_STYLE_COLOUR('',#270350); +#278127 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278128)); +#278128 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278129 = STYLED_ITEM('color',(#278130),#249798); +#278130 = PRESENTATION_STYLE_ASSIGNMENT((#278131)); +#278131 = SURFACE_STYLE_USAGE(.BOTH.,#278132); +#278132 = SURFACE_SIDE_STYLE('',(#278133,#278136)); +#278133 = SURFACE_STYLE_FILL_AREA(#278134); +#278134 = FILL_AREA_STYLE('',(#278135)); +#278135 = FILL_AREA_STYLE_COLOUR('',#270350); +#278136 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278137)); +#278137 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278138 = STYLED_ITEM('color',(#278139),#249842); +#278139 = PRESENTATION_STYLE_ASSIGNMENT((#278140)); +#278140 = SURFACE_STYLE_USAGE(.BOTH.,#278141); +#278141 = SURFACE_SIDE_STYLE('',(#278142,#278145)); +#278142 = SURFACE_STYLE_FILL_AREA(#278143); +#278143 = FILL_AREA_STYLE('',(#278144)); +#278144 = FILL_AREA_STYLE_COLOUR('',#270350); +#278145 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278146)); +#278146 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278147 = STYLED_ITEM('color',(#278148),#250025); +#278148 = PRESENTATION_STYLE_ASSIGNMENT((#278149)); +#278149 = SURFACE_STYLE_USAGE(.BOTH.,#278150); +#278150 = SURFACE_SIDE_STYLE('',(#278151,#278154)); +#278151 = SURFACE_STYLE_FILL_AREA(#278152); +#278152 = FILL_AREA_STYLE('',(#278153)); +#278153 = FILL_AREA_STYLE_COLOUR('',#270350); +#278154 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278155)); +#278155 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278156 = STYLED_ITEM('color',(#278157),#250101); +#278157 = PRESENTATION_STYLE_ASSIGNMENT((#278158)); +#278158 = SURFACE_STYLE_USAGE(.BOTH.,#278159); +#278159 = SURFACE_SIDE_STYLE('',(#278160,#278163)); +#278160 = SURFACE_STYLE_FILL_AREA(#278161); +#278161 = FILL_AREA_STYLE('',(#278162)); +#278162 = FILL_AREA_STYLE_COLOUR('',#270350); +#278163 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278164)); +#278164 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278165 = STYLED_ITEM('color',(#278166),#250195); +#278166 = PRESENTATION_STYLE_ASSIGNMENT((#278167)); +#278167 = SURFACE_STYLE_USAGE(.BOTH.,#278168); +#278168 = SURFACE_SIDE_STYLE('',(#278169,#278172)); +#278169 = SURFACE_STYLE_FILL_AREA(#278170); +#278170 = FILL_AREA_STYLE('',(#278171)); +#278171 = FILL_AREA_STYLE_COLOUR('',#270350); +#278172 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278173)); +#278173 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278174 = STYLED_ITEM('color',(#278175),#250289); +#278175 = PRESENTATION_STYLE_ASSIGNMENT((#278176)); +#278176 = SURFACE_STYLE_USAGE(.BOTH.,#278177); +#278177 = SURFACE_SIDE_STYLE('',(#278178,#278181)); +#278178 = SURFACE_STYLE_FILL_AREA(#278179); +#278179 = FILL_AREA_STYLE('',(#278180)); +#278180 = FILL_AREA_STYLE_COLOUR('',#270350); +#278181 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278182)); +#278182 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278183 = STYLED_ITEM('color',(#278184),#250383); +#278184 = PRESENTATION_STYLE_ASSIGNMENT((#278185)); +#278185 = SURFACE_STYLE_USAGE(.BOTH.,#278186); +#278186 = SURFACE_SIDE_STYLE('',(#278187,#278190)); +#278187 = SURFACE_STYLE_FILL_AREA(#278188); +#278188 = FILL_AREA_STYLE('',(#278189)); +#278189 = FILL_AREA_STYLE_COLOUR('',#270350); +#278190 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278191)); +#278191 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278192 = STYLED_ITEM('color',(#278193),#250477); +#278193 = PRESENTATION_STYLE_ASSIGNMENT((#278194)); +#278194 = SURFACE_STYLE_USAGE(.BOTH.,#278195); +#278195 = SURFACE_SIDE_STYLE('',(#278196,#278199)); +#278196 = SURFACE_STYLE_FILL_AREA(#278197); +#278197 = FILL_AREA_STYLE('',(#278198)); +#278198 = FILL_AREA_STYLE_COLOUR('',#270350); +#278199 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278200)); +#278200 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278201 = STYLED_ITEM('color',(#278202),#250660); +#278202 = PRESENTATION_STYLE_ASSIGNMENT((#278203)); +#278203 = SURFACE_STYLE_USAGE(.BOTH.,#278204); +#278204 = SURFACE_SIDE_STYLE('',(#278205,#278208)); +#278205 = SURFACE_STYLE_FILL_AREA(#278206); +#278206 = FILL_AREA_STYLE('',(#278207)); +#278207 = FILL_AREA_STYLE_COLOUR('',#270350); +#278208 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278209)); +#278209 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278210 = STYLED_ITEM('color',(#278211),#250729); +#278211 = PRESENTATION_STYLE_ASSIGNMENT((#278212)); +#278212 = SURFACE_STYLE_USAGE(.BOTH.,#278213); +#278213 = SURFACE_SIDE_STYLE('',(#278214,#278217)); +#278214 = SURFACE_STYLE_FILL_AREA(#278215); +#278215 = FILL_AREA_STYLE('',(#278216)); +#278216 = FILL_AREA_STYLE_COLOUR('',#270350); +#278217 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278218)); +#278218 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278219 = STYLED_ITEM('color',(#278220),#250798); +#278220 = PRESENTATION_STYLE_ASSIGNMENT((#278221)); +#278221 = SURFACE_STYLE_USAGE(.BOTH.,#278222); +#278222 = SURFACE_SIDE_STYLE('',(#278223,#278226)); +#278223 = SURFACE_STYLE_FILL_AREA(#278224); +#278224 = FILL_AREA_STYLE('',(#278225)); +#278225 = FILL_AREA_STYLE_COLOUR('',#270350); +#278226 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278227)); +#278227 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278228 = STYLED_ITEM('color',(#278229),#250867); +#278229 = PRESENTATION_STYLE_ASSIGNMENT((#278230)); +#278230 = SURFACE_STYLE_USAGE(.BOTH.,#278231); +#278231 = SURFACE_SIDE_STYLE('',(#278232,#278235)); +#278232 = SURFACE_STYLE_FILL_AREA(#278233); +#278233 = FILL_AREA_STYLE('',(#278234)); +#278234 = FILL_AREA_STYLE_COLOUR('',#270350); +#278235 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278236)); +#278236 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278237 = STYLED_ITEM('color',(#278238),#250936); +#278238 = PRESENTATION_STYLE_ASSIGNMENT((#278239)); +#278239 = SURFACE_STYLE_USAGE(.BOTH.,#278240); +#278240 = SURFACE_SIDE_STYLE('',(#278241,#278244)); +#278241 = SURFACE_STYLE_FILL_AREA(#278242); +#278242 = FILL_AREA_STYLE('',(#278243)); +#278243 = FILL_AREA_STYLE_COLOUR('',#270350); +#278244 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278245)); +#278245 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278246 = STYLED_ITEM('color',(#278247),#250980); +#278247 = PRESENTATION_STYLE_ASSIGNMENT((#278248)); +#278248 = SURFACE_STYLE_USAGE(.BOTH.,#278249); +#278249 = SURFACE_SIDE_STYLE('',(#278250,#278253)); +#278250 = SURFACE_STYLE_FILL_AREA(#278251); +#278251 = FILL_AREA_STYLE('',(#278252)); +#278252 = FILL_AREA_STYLE_COLOUR('',#270350); +#278253 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278254)); +#278254 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278255 = STYLED_ITEM('color',(#278256),#251024); +#278256 = PRESENTATION_STYLE_ASSIGNMENT((#278257)); +#278257 = SURFACE_STYLE_USAGE(.BOTH.,#278258); +#278258 = SURFACE_SIDE_STYLE('',(#278259,#278262)); +#278259 = SURFACE_STYLE_FILL_AREA(#278260); +#278260 = FILL_AREA_STYLE('',(#278261)); +#278261 = FILL_AREA_STYLE_COLOUR('',#270350); +#278262 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278263)); +#278263 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278264 = STYLED_ITEM('color',(#278265),#251068); +#278265 = PRESENTATION_STYLE_ASSIGNMENT((#278266)); +#278266 = SURFACE_STYLE_USAGE(.BOTH.,#278267); +#278267 = SURFACE_SIDE_STYLE('',(#278268,#278271)); +#278268 = SURFACE_STYLE_FILL_AREA(#278269); +#278269 = FILL_AREA_STYLE('',(#278270)); +#278270 = FILL_AREA_STYLE_COLOUR('',#270350); +#278271 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278272)); +#278272 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278273 = STYLED_ITEM('color',(#278274),#251261); +#278274 = PRESENTATION_STYLE_ASSIGNMENT((#278275)); +#278275 = SURFACE_STYLE_USAGE(.BOTH.,#278276); +#278276 = SURFACE_SIDE_STYLE('',(#278277,#278280)); +#278277 = SURFACE_STYLE_FILL_AREA(#278278); +#278278 = FILL_AREA_STYLE('',(#278279)); +#278279 = FILL_AREA_STYLE_COLOUR('',#270350); +#278280 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278281)); +#278281 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278282 = STYLED_ITEM('color',(#278283),#251305); +#278283 = PRESENTATION_STYLE_ASSIGNMENT((#278284)); +#278284 = SURFACE_STYLE_USAGE(.BOTH.,#278285); +#278285 = SURFACE_SIDE_STYLE('',(#278286,#278289)); +#278286 = SURFACE_STYLE_FILL_AREA(#278287); +#278287 = FILL_AREA_STYLE('',(#278288)); +#278288 = FILL_AREA_STYLE_COLOUR('',#270350); +#278289 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278290)); +#278290 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278291 = STYLED_ITEM('color',(#278292),#251431); +#278292 = PRESENTATION_STYLE_ASSIGNMENT((#278293)); +#278293 = SURFACE_STYLE_USAGE(.BOTH.,#278294); +#278294 = SURFACE_SIDE_STYLE('',(#278295,#278298)); +#278295 = SURFACE_STYLE_FILL_AREA(#278296); +#278296 = FILL_AREA_STYLE('',(#278297)); +#278297 = FILL_AREA_STYLE_COLOUR('',#270350); +#278298 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278299)); +#278299 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278300 = STYLED_ITEM('color',(#278301),#251625); +#278301 = PRESENTATION_STYLE_ASSIGNMENT((#278302)); +#278302 = SURFACE_STYLE_USAGE(.BOTH.,#278303); +#278303 = SURFACE_SIDE_STYLE('',(#278304,#278307)); +#278304 = SURFACE_STYLE_FILL_AREA(#278305); +#278305 = FILL_AREA_STYLE('',(#278306)); +#278306 = FILL_AREA_STYLE_COLOUR('',#270350); +#278307 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278308)); +#278308 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278309 = STYLED_ITEM('color',(#278310),#251807); +#278310 = PRESENTATION_STYLE_ASSIGNMENT((#278311)); +#278311 = SURFACE_STYLE_USAGE(.BOTH.,#278312); +#278312 = SURFACE_SIDE_STYLE('',(#278313,#278316)); +#278313 = SURFACE_STYLE_FILL_AREA(#278314); +#278314 = FILL_AREA_STYLE('',(#278315)); +#278315 = FILL_AREA_STYLE_COLOUR('',#270350); +#278316 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278317)); +#278317 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278318 = STYLED_ITEM('color',(#278319),#251974); +#278319 = PRESENTATION_STYLE_ASSIGNMENT((#278320)); +#278320 = SURFACE_STYLE_USAGE(.BOTH.,#278321); +#278321 = SURFACE_SIDE_STYLE('',(#278322,#278325)); +#278322 = SURFACE_STYLE_FILL_AREA(#278323); +#278323 = FILL_AREA_STYLE('',(#278324)); +#278324 = FILL_AREA_STYLE_COLOUR('',#270350); +#278325 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278326)); +#278326 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278327 = STYLED_ITEM('color',(#278328),#252141); +#278328 = PRESENTATION_STYLE_ASSIGNMENT((#278329)); +#278329 = SURFACE_STYLE_USAGE(.BOTH.,#278330); +#278330 = SURFACE_SIDE_STYLE('',(#278331,#278334)); +#278331 = SURFACE_STYLE_FILL_AREA(#278332); +#278332 = FILL_AREA_STYLE('',(#278333)); +#278333 = FILL_AREA_STYLE_COLOUR('',#270350); +#278334 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278335)); +#278335 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278336 = STYLED_ITEM('color',(#278337),#252283); +#278337 = PRESENTATION_STYLE_ASSIGNMENT((#278338)); +#278338 = SURFACE_STYLE_USAGE(.BOTH.,#278339); +#278339 = SURFACE_SIDE_STYLE('',(#278340,#278343)); +#278340 = SURFACE_STYLE_FILL_AREA(#278341); +#278341 = FILL_AREA_STYLE('',(#278342)); +#278342 = FILL_AREA_STYLE_COLOUR('',#270350); +#278343 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278344)); +#278344 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278345 = STYLED_ITEM('color',(#278346),#252454); +#278346 = PRESENTATION_STYLE_ASSIGNMENT((#278347)); +#278347 = SURFACE_STYLE_USAGE(.BOTH.,#278348); +#278348 = SURFACE_SIDE_STYLE('',(#278349,#278352)); +#278349 = SURFACE_STYLE_FILL_AREA(#278350); +#278350 = FILL_AREA_STYLE('',(#278351)); +#278351 = FILL_AREA_STYLE_COLOUR('',#270350); +#278352 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278353)); +#278353 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278354 = STYLED_ITEM('color',(#278355),#252625); +#278355 = PRESENTATION_STYLE_ASSIGNMENT((#278356)); +#278356 = SURFACE_STYLE_USAGE(.BOTH.,#278357); +#278357 = SURFACE_SIDE_STYLE('',(#278358,#278361)); +#278358 = SURFACE_STYLE_FILL_AREA(#278359); +#278359 = FILL_AREA_STYLE('',(#278360)); +#278360 = FILL_AREA_STYLE_COLOUR('',#270350); +#278361 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278362)); +#278362 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278363 = STYLED_ITEM('color',(#278364),#252818); +#278364 = PRESENTATION_STYLE_ASSIGNMENT((#278365)); +#278365 = SURFACE_STYLE_USAGE(.BOTH.,#278366); +#278366 = SURFACE_SIDE_STYLE('',(#278367,#278370)); +#278367 = SURFACE_STYLE_FILL_AREA(#278368); +#278368 = FILL_AREA_STYLE('',(#278369)); +#278369 = FILL_AREA_STYLE_COLOUR('',#270350); +#278370 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278371)); +#278371 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278372 = STYLED_ITEM('color',(#278373),#253012); +#278373 = PRESENTATION_STYLE_ASSIGNMENT((#278374)); +#278374 = SURFACE_STYLE_USAGE(.BOTH.,#278375); +#278375 = SURFACE_SIDE_STYLE('',(#278376,#278379)); +#278376 = SURFACE_STYLE_FILL_AREA(#278377); +#278377 = FILL_AREA_STYLE('',(#278378)); +#278378 = FILL_AREA_STYLE_COLOUR('',#270350); +#278379 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278380)); +#278380 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278381 = STYLED_ITEM('color',(#278382),#253305); +#278382 = PRESENTATION_STYLE_ASSIGNMENT((#278383)); +#278383 = SURFACE_STYLE_USAGE(.BOTH.,#278384); +#278384 = SURFACE_SIDE_STYLE('',(#278385,#278388)); +#278385 = SURFACE_STYLE_FILL_AREA(#278386); +#278386 = FILL_AREA_STYLE('',(#278387)); +#278387 = FILL_AREA_STYLE_COLOUR('',#270350); +#278388 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278389)); +#278389 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278390 = STYLED_ITEM('color',(#278391),#253517); +#278391 = PRESENTATION_STYLE_ASSIGNMENT((#278392)); +#278392 = SURFACE_STYLE_USAGE(.BOTH.,#278393); +#278393 = SURFACE_SIDE_STYLE('',(#278394,#278397)); +#278394 = SURFACE_STYLE_FILL_AREA(#278395); +#278395 = FILL_AREA_STYLE('',(#278396)); +#278396 = FILL_AREA_STYLE_COLOUR('',#270350); +#278397 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278398)); +#278398 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278399 = STYLED_ITEM('color',(#278400),#253659); +#278400 = PRESENTATION_STYLE_ASSIGNMENT((#278401)); +#278401 = SURFACE_STYLE_USAGE(.BOTH.,#278402); +#278402 = SURFACE_SIDE_STYLE('',(#278403,#278406)); +#278403 = SURFACE_STYLE_FILL_AREA(#278404); +#278404 = FILL_AREA_STYLE('',(#278405)); +#278405 = FILL_AREA_STYLE_COLOUR('',#270350); +#278406 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278407)); +#278407 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278408 = STYLED_ITEM('color',(#278409),#253761); +#278409 = PRESENTATION_STYLE_ASSIGNMENT((#278410)); +#278410 = SURFACE_STYLE_USAGE(.BOTH.,#278411); +#278411 = SURFACE_SIDE_STYLE('',(#278412,#278415)); +#278412 = SURFACE_STYLE_FILL_AREA(#278413); +#278413 = FILL_AREA_STYLE('',(#278414)); +#278414 = FILL_AREA_STYLE_COLOUR('',#270350); +#278415 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278416)); +#278416 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278417 = STYLED_ITEM('color',(#278418),#253963); +#278418 = PRESENTATION_STYLE_ASSIGNMENT((#278419)); +#278419 = SURFACE_STYLE_USAGE(.BOTH.,#278420); +#278420 = SURFACE_SIDE_STYLE('',(#278421,#278424)); +#278421 = SURFACE_STYLE_FILL_AREA(#278422); +#278422 = FILL_AREA_STYLE('',(#278423)); +#278423 = FILL_AREA_STYLE_COLOUR('',#270350); +#278424 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278425)); +#278425 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278426 = STYLED_ITEM('color',(#278427),#254105); +#278427 = PRESENTATION_STYLE_ASSIGNMENT((#278428)); +#278428 = SURFACE_STYLE_USAGE(.BOTH.,#278429); +#278429 = SURFACE_SIDE_STYLE('',(#278430,#278433)); +#278430 = SURFACE_STYLE_FILL_AREA(#278431); +#278431 = FILL_AREA_STYLE('',(#278432)); +#278432 = FILL_AREA_STYLE_COLOUR('',#270350); +#278433 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278434)); +#278434 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278435 = STYLED_ITEM('color',(#278436),#254272); +#278436 = PRESENTATION_STYLE_ASSIGNMENT((#278437)); +#278437 = SURFACE_STYLE_USAGE(.BOTH.,#278438); +#278438 = SURFACE_SIDE_STYLE('',(#278439,#278442)); +#278439 = SURFACE_STYLE_FILL_AREA(#278440); +#278440 = FILL_AREA_STYLE('',(#278441)); +#278441 = FILL_AREA_STYLE_COLOUR('',#270350); +#278442 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278443)); +#278443 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278444 = STYLED_ITEM('color',(#278445),#254414); +#278445 = PRESENTATION_STYLE_ASSIGNMENT((#278446)); +#278446 = SURFACE_STYLE_USAGE(.BOTH.,#278447); +#278447 = SURFACE_SIDE_STYLE('',(#278448,#278451)); +#278448 = SURFACE_STYLE_FILL_AREA(#278449); +#278449 = FILL_AREA_STYLE('',(#278450)); +#278450 = FILL_AREA_STYLE_COLOUR('',#270350); +#278451 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278452)); +#278452 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278453 = STYLED_ITEM('color',(#278454),#254556); +#278454 = PRESENTATION_STYLE_ASSIGNMENT((#278455)); +#278455 = SURFACE_STYLE_USAGE(.BOTH.,#278456); +#278456 = SURFACE_SIDE_STYLE('',(#278457,#278460)); +#278457 = SURFACE_STYLE_FILL_AREA(#278458); +#278458 = FILL_AREA_STYLE('',(#278459)); +#278459 = FILL_AREA_STYLE_COLOUR('',#270350); +#278460 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278461)); +#278461 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278462 = STYLED_ITEM('color',(#278463),#254694); +#278463 = PRESENTATION_STYLE_ASSIGNMENT((#278464)); +#278464 = SURFACE_STYLE_USAGE(.BOTH.,#278465); +#278465 = SURFACE_SIDE_STYLE('',(#278466,#278469)); +#278466 = SURFACE_STYLE_FILL_AREA(#278467); +#278467 = FILL_AREA_STYLE('',(#278468)); +#278468 = FILL_AREA_STYLE_COLOUR('',#270350); +#278469 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278470)); +#278470 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278471 = STYLED_ITEM('color',(#278472),#254897); +#278472 = PRESENTATION_STYLE_ASSIGNMENT((#278473)); +#278473 = SURFACE_STYLE_USAGE(.BOTH.,#278474); +#278474 = SURFACE_SIDE_STYLE('',(#278475,#278478)); +#278475 = SURFACE_STYLE_FILL_AREA(#278476); +#278476 = FILL_AREA_STYLE('',(#278477)); +#278477 = FILL_AREA_STYLE_COLOUR('',#270350); +#278478 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278479)); +#278479 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278480 = STYLED_ITEM('color',(#278481),#255035); +#278481 = PRESENTATION_STYLE_ASSIGNMENT((#278482)); +#278482 = SURFACE_STYLE_USAGE(.BOTH.,#278483); +#278483 = SURFACE_SIDE_STYLE('',(#278484,#278487)); +#278484 = SURFACE_STYLE_FILL_AREA(#278485); +#278485 = FILL_AREA_STYLE('',(#278486)); +#278486 = FILL_AREA_STYLE_COLOUR('',#270350); +#278487 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278488)); +#278488 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278489 = STYLED_ITEM('color',(#278490),#255229); +#278490 = PRESENTATION_STYLE_ASSIGNMENT((#278491)); +#278491 = SURFACE_STYLE_USAGE(.BOTH.,#278492); +#278492 = SURFACE_SIDE_STYLE('',(#278493,#278496)); +#278493 = SURFACE_STYLE_FILL_AREA(#278494); +#278494 = FILL_AREA_STYLE('',(#278495)); +#278495 = FILL_AREA_STYLE_COLOUR('',#270350); +#278496 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278497)); +#278497 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278498 = STYLED_ITEM('color',(#278499),#255367); +#278499 = PRESENTATION_STYLE_ASSIGNMENT((#278500)); +#278500 = SURFACE_STYLE_USAGE(.BOTH.,#278501); +#278501 = SURFACE_SIDE_STYLE('',(#278502,#278505)); +#278502 = SURFACE_STYLE_FILL_AREA(#278503); +#278503 = FILL_AREA_STYLE('',(#278504)); +#278504 = FILL_AREA_STYLE_COLOUR('',#270350); +#278505 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278506)); +#278506 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278507 = STYLED_ITEM('color',(#278508),#255505); +#278508 = PRESENTATION_STYLE_ASSIGNMENT((#278509)); +#278509 = SURFACE_STYLE_USAGE(.BOTH.,#278510); +#278510 = SURFACE_SIDE_STYLE('',(#278511,#278514)); +#278511 = SURFACE_STYLE_FILL_AREA(#278512); +#278512 = FILL_AREA_STYLE('',(#278513)); +#278513 = FILL_AREA_STYLE_COLOUR('',#270350); +#278514 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278515)); +#278515 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278516 = STYLED_ITEM('color',(#278517),#255647); +#278517 = PRESENTATION_STYLE_ASSIGNMENT((#278518)); +#278518 = SURFACE_STYLE_USAGE(.BOTH.,#278519); +#278519 = SURFACE_SIDE_STYLE('',(#278520,#278523)); +#278520 = SURFACE_STYLE_FILL_AREA(#278521); +#278521 = FILL_AREA_STYLE('',(#278522)); +#278522 = FILL_AREA_STYLE_COLOUR('',#270350); +#278523 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278524)); +#278524 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278525 = STYLED_ITEM('color',(#278526),#255814); +#278526 = PRESENTATION_STYLE_ASSIGNMENT((#278527)); +#278527 = SURFACE_STYLE_USAGE(.BOTH.,#278528); +#278528 = SURFACE_SIDE_STYLE('',(#278529,#278532)); +#278529 = SURFACE_STYLE_FILL_AREA(#278530); +#278530 = FILL_AREA_STYLE('',(#278531)); +#278531 = FILL_AREA_STYLE_COLOUR('',#270350); +#278532 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278533)); +#278533 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278534 = STYLED_ITEM('color',(#278535),#256021); +#278535 = PRESENTATION_STYLE_ASSIGNMENT((#278536)); +#278536 = SURFACE_STYLE_USAGE(.BOTH.,#278537); +#278537 = SURFACE_SIDE_STYLE('',(#278538,#278541)); +#278538 = SURFACE_STYLE_FILL_AREA(#278539); +#278539 = FILL_AREA_STYLE('',(#278540)); +#278540 = FILL_AREA_STYLE_COLOUR('',#270350); +#278541 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278542)); +#278542 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278543 = STYLED_ITEM('color',(#278544),#256228); +#278544 = PRESENTATION_STYLE_ASSIGNMENT((#278545)); +#278545 = SURFACE_STYLE_USAGE(.BOTH.,#278546); +#278546 = SURFACE_SIDE_STYLE('',(#278547,#278550)); +#278547 = SURFACE_STYLE_FILL_AREA(#278548); +#278548 = FILL_AREA_STYLE('',(#278549)); +#278549 = FILL_AREA_STYLE_COLOUR('',#270350); +#278550 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278551)); +#278551 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278552 = STYLED_ITEM('color',(#278553),#256435); +#278553 = PRESENTATION_STYLE_ASSIGNMENT((#278554)); +#278554 = SURFACE_STYLE_USAGE(.BOTH.,#278555); +#278555 = SURFACE_SIDE_STYLE('',(#278556,#278559)); +#278556 = SURFACE_STYLE_FILL_AREA(#278557); +#278557 = FILL_AREA_STYLE('',(#278558)); +#278558 = FILL_AREA_STYLE_COLOUR('',#270350); +#278559 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278560)); +#278560 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278561 = STYLED_ITEM('color',(#278562),#256642); +#278562 = PRESENTATION_STYLE_ASSIGNMENT((#278563)); +#278563 = SURFACE_STYLE_USAGE(.BOTH.,#278564); +#278564 = SURFACE_SIDE_STYLE('',(#278565,#278568)); +#278565 = SURFACE_STYLE_FILL_AREA(#278566); +#278566 = FILL_AREA_STYLE('',(#278567)); +#278567 = FILL_AREA_STYLE_COLOUR('',#270350); +#278568 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278569)); +#278569 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278570 = STYLED_ITEM('color',(#278571),#256887); +#278571 = PRESENTATION_STYLE_ASSIGNMENT((#278572)); +#278572 = SURFACE_STYLE_USAGE(.BOTH.,#278573); +#278573 = SURFACE_SIDE_STYLE('',(#278574,#278577)); +#278574 = SURFACE_STYLE_FILL_AREA(#278575); +#278575 = FILL_AREA_STYLE('',(#278576)); +#278576 = FILL_AREA_STYLE_COLOUR('',#270350); +#278577 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278578)); +#278578 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278579 = STYLED_ITEM('color',(#278580),#257132); +#278580 = PRESENTATION_STYLE_ASSIGNMENT((#278581)); +#278581 = SURFACE_STYLE_USAGE(.BOTH.,#278582); +#278582 = SURFACE_SIDE_STYLE('',(#278583,#278586)); +#278583 = SURFACE_STYLE_FILL_AREA(#278584); +#278584 = FILL_AREA_STYLE('',(#278585)); +#278585 = FILL_AREA_STYLE_COLOUR('',#270350); +#278586 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278587)); +#278587 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278588 = STYLED_ITEM('color',(#278589),#257377); +#278589 = PRESENTATION_STYLE_ASSIGNMENT((#278590)); +#278590 = SURFACE_STYLE_USAGE(.BOTH.,#278591); +#278591 = SURFACE_SIDE_STYLE('',(#278592,#278595)); +#278592 = SURFACE_STYLE_FILL_AREA(#278593); +#278593 = FILL_AREA_STYLE('',(#278594)); +#278594 = FILL_AREA_STYLE_COLOUR('',#270350); +#278595 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278596)); +#278596 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278597 = STYLED_ITEM('color',(#278598),#257571); +#278598 = PRESENTATION_STYLE_ASSIGNMENT((#278599)); +#278599 = SURFACE_STYLE_USAGE(.BOTH.,#278600); +#278600 = SURFACE_SIDE_STYLE('',(#278601,#278604)); +#278601 = SURFACE_STYLE_FILL_AREA(#278602); +#278602 = FILL_AREA_STYLE('',(#278603)); +#278603 = FILL_AREA_STYLE_COLOUR('',#270350); +#278604 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278605)); +#278605 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278606 = STYLED_ITEM('color',(#278607),#257816); +#278607 = PRESENTATION_STYLE_ASSIGNMENT((#278608)); +#278608 = SURFACE_STYLE_USAGE(.BOTH.,#278609); +#278609 = SURFACE_SIDE_STYLE('',(#278610,#278613)); +#278610 = SURFACE_STYLE_FILL_AREA(#278611); +#278611 = FILL_AREA_STYLE('',(#278612)); +#278612 = FILL_AREA_STYLE_COLOUR('',#270350); +#278613 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#278614)); +#278614 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278615 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #278616,#278627,#278635,#278642,#278649,#278656,#278663,#278670, + #278677,#278684,#278691,#278698,#278705,#278712,#278719,#278726, + #278733,#278740,#278747,#278754,#278761,#278768,#278775,#278782, + #278789,#278796,#278803,#278810,#278817,#278824,#278831,#278838, + #278845,#278852,#278859,#278866,#278873,#278880,#278887,#278894, + #278901,#278908,#278915,#278922,#278929,#278936,#278943,#278950, + #278957,#278964,#278971,#278978,#278985,#278992,#278999,#279006, + #279013,#279020,#279027,#279034,#279041,#279048,#279055,#279062, + #279069,#279076,#279083,#279090,#279097,#279104,#279111,#279118, + #279125,#279132,#279139,#279146,#279153,#279160,#279167,#279174, + #279181,#279188,#279195,#279202,#279209,#279216,#279223,#279230, + #279237,#279244,#279251,#279258,#279265,#279272,#279279,#279286, + #279293,#279300,#279307,#279314,#279321,#279328,#279335,#279342, + #279349,#279356,#279363,#279370,#279377,#279384,#279391,#279398, + #279405,#279412,#279419,#279426,#279433,#279440,#279447,#279454, + #279461,#279468,#279475,#279482,#279489,#279496,#279503,#279510, + #279517,#279524,#279531,#279538,#279545,#279552,#279559,#279566, + #279573,#279580,#279587,#279594,#279601,#279608,#279617,#279625, + #279632,#279639,#279646,#279653,#279660,#279667,#279674,#279681, + #279688,#279695,#279702,#279709,#279716,#279723,#279730,#279737, + #279744,#279751,#279758,#279765,#279772,#279779,#279786,#279793, + #279800,#279807,#279814,#279821,#279828,#279835,#279842,#279849, + #279856,#279863,#279870,#279877,#279884,#279891,#279898,#279905, + #279912,#279919,#279926,#279933,#279940,#279947,#279954,#279961, + #279968,#279975,#279982,#279989,#279996,#280003,#280010,#280017, + #280024,#280031,#280038,#280045,#280052,#280059,#280066,#280073, + #280080,#280087,#280094,#280101,#280108,#280115,#280122,#280129, + #280136,#280143,#280150,#280157,#280164,#280171,#280178,#280185, + #280192,#280199,#280206,#280213,#280220,#280227,#280234,#280241, + #280248,#280255,#280262,#280269,#280276,#280283,#280290,#280297, + #280304,#280311,#280318,#280325,#280332,#280339,#280346,#280353, + #280360,#280367,#280374,#280381,#280388,#280395,#280402,#280409, + #280416,#280423,#280430,#280437,#280444,#280451,#280458,#280465, + #280472,#280479,#280486,#280493,#280500,#280507,#280514,#280521, + #280528,#280535,#280542,#280549,#280556,#280563,#280570,#280577, + #280584,#280591,#280598,#280605,#280612,#280619,#280626,#280633, + #280640,#280647,#280654,#280661,#280668,#280675,#280684,#280692, + #280699,#280706,#280713,#280720,#280727,#280736,#280743,#280750, + #280757,#280764,#280771,#280778,#280787,#280794,#280801,#280808, + #280815,#280822,#280829,#280838,#280845,#280852,#280859,#280866, + #280873,#280880,#280889,#280896,#280903,#280910,#280917,#280924, + #280931,#280940,#280947,#280954,#280961,#280968,#280975,#280982, + #280991,#280998,#281005,#281012,#281019,#281026,#281033,#281042, + #281049,#281056,#281063,#281070,#281077,#281084,#281093,#281100, + #281107,#281114,#281121,#281128,#281135,#281144,#281151,#281158, + #281165,#281172,#281179,#281186,#281195,#281202,#281209,#281216, + #281223,#281230,#281237,#281246,#281253,#281260,#281267,#281274, + #281281,#281288,#281297,#281304,#281311,#281318,#281325,#281332, + #281339,#281348,#281355,#281362,#281369,#281376,#281383,#281390, + #281399,#281406,#281413,#281420,#281427,#281434,#281441,#281450, + #281457,#281464,#281471,#281478,#281485,#281492,#281501,#281508, + #281515,#281522,#281529,#281536,#281543,#281550,#281557,#281566, + #281573,#281580,#281587,#281594,#281601,#281608,#281615,#281622, + #281631,#281638,#281645,#281652,#281659,#281666,#281673,#281680, + #281687,#281696,#281703,#281710,#281717,#281724,#281731,#281738, + #281745,#281752,#281761,#281768,#281775,#281782,#281789,#281796, + #281803,#281810,#281817,#281826,#281833,#281840,#281847,#281854, + #281861,#281868,#281875,#281882,#281891,#281898,#281905,#281912, + #281919,#281926,#281933,#281940,#281947,#281956,#281963,#281970, + #281977,#281984,#281991,#281998,#282005,#282012,#282021,#282028, + #282035,#282042,#282049,#282056,#282063,#282070,#282077,#282086, + #282093,#282100,#282107,#282114,#282121,#282128,#282135,#282142, + #282151,#282158,#282165,#282172,#282179,#282186,#282193,#282200, + #282207,#282216,#282223,#282230,#282237,#282244,#282251,#282258, + #282265,#282272,#282281,#282288,#282295,#282302,#282309,#282316, + #282323,#282330,#282337,#282346,#282353,#282360,#282367,#282374, + #282381,#282388,#282395,#282402,#282411,#282418,#282425,#282432, + #282439,#282446,#282453,#282460,#282467,#282476,#282483,#282490, + #282497,#282504,#282511,#282518,#282525),#81268); +#278616 = STYLED_ITEM('color',(#278617),#66663); +#278617 = PRESENTATION_STYLE_ASSIGNMENT((#278618,#278624)); +#278618 = SURFACE_STYLE_USAGE(.BOTH.,#278619); +#278619 = SURFACE_SIDE_STYLE('',(#278620)); +#278620 = SURFACE_STYLE_FILL_AREA(#278621); +#278621 = FILL_AREA_STYLE('',(#278622)); +#278622 = FILL_AREA_STYLE_COLOUR('',#278623); +#278623 = COLOUR_RGB('',0.800000010877,0.800000010877,0.800000010877); +#278624 = CURVE_STYLE('',#278625,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#278625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#278626 = COLOUR_RGB('',9.803921802644E-02,9.803921802644E-02, + 9.803921802644E-02); +#278627 = OVER_RIDING_STYLED_ITEM('overriding color',(#278628),#66665, + #278616); +#278628 = PRESENTATION_STYLE_ASSIGNMENT((#278629)); +#278629 = SURFACE_STYLE_USAGE(.BOTH.,#278630); +#278630 = SURFACE_SIDE_STYLE('',(#278631)); +#278631 = SURFACE_STYLE_FILL_AREA(#278632); +#278632 = FILL_AREA_STYLE('',(#278633)); +#278633 = FILL_AREA_STYLE_COLOUR('',#278634); +#278634 = COLOUR_RGB('',0.298000002942,0.298000002942,0.298000002942); +#278635 = OVER_RIDING_STYLED_ITEM('overriding color',(#278636),#66865, + #278616); +#278636 = PRESENTATION_STYLE_ASSIGNMENT((#278637)); +#278637 = SURFACE_STYLE_USAGE(.BOTH.,#278638); +#278638 = SURFACE_SIDE_STYLE('',(#278639)); +#278639 = SURFACE_STYLE_FILL_AREA(#278640); +#278640 = FILL_AREA_STYLE('',(#278641)); +#278641 = FILL_AREA_STYLE_COLOUR('',#278634); +#278642 = OVER_RIDING_STYLED_ITEM('overriding color',(#278643),#67002, + #278616); +#278643 = PRESENTATION_STYLE_ASSIGNMENT((#278644)); +#278644 = SURFACE_STYLE_USAGE(.BOTH.,#278645); +#278645 = SURFACE_SIDE_STYLE('',(#278646)); +#278646 = SURFACE_STYLE_FILL_AREA(#278647); +#278647 = FILL_AREA_STYLE('',(#278648)); +#278648 = FILL_AREA_STYLE_COLOUR('',#278634); +#278649 = OVER_RIDING_STYLED_ITEM('overriding color',(#278650),#67027, + #278616); +#278650 = PRESENTATION_STYLE_ASSIGNMENT((#278651)); +#278651 = SURFACE_STYLE_USAGE(.BOTH.,#278652); +#278652 = SURFACE_SIDE_STYLE('',(#278653)); +#278653 = SURFACE_STYLE_FILL_AREA(#278654); +#278654 = FILL_AREA_STYLE('',(#278655)); +#278655 = FILL_AREA_STYLE_COLOUR('',#278634); +#278656 = OVER_RIDING_STYLED_ITEM('overriding color',(#278657),#67052, + #278616); +#278657 = PRESENTATION_STYLE_ASSIGNMENT((#278658)); +#278658 = SURFACE_STYLE_USAGE(.BOTH.,#278659); +#278659 = SURFACE_SIDE_STYLE('',(#278660)); +#278660 = SURFACE_STYLE_FILL_AREA(#278661); +#278661 = FILL_AREA_STYLE('',(#278662)); +#278662 = FILL_AREA_STYLE_COLOUR('',#278634); +#278663 = OVER_RIDING_STYLED_ITEM('overriding color',(#278664),#67109, + #278616); +#278664 = PRESENTATION_STYLE_ASSIGNMENT((#278665)); +#278665 = SURFACE_STYLE_USAGE(.BOTH.,#278666); +#278666 = SURFACE_SIDE_STYLE('',(#278667)); +#278667 = SURFACE_STYLE_FILL_AREA(#278668); +#278668 = FILL_AREA_STYLE('',(#278669)); +#278669 = FILL_AREA_STYLE_COLOUR('',#278634); +#278670 = OVER_RIDING_STYLED_ITEM('overriding color',(#278671),#67166, + #278616); +#278671 = PRESENTATION_STYLE_ASSIGNMENT((#278672)); +#278672 = SURFACE_STYLE_USAGE(.BOTH.,#278673); +#278673 = SURFACE_SIDE_STYLE('',(#278674)); +#278674 = SURFACE_STYLE_FILL_AREA(#278675); +#278675 = FILL_AREA_STYLE('',(#278676)); +#278676 = FILL_AREA_STYLE_COLOUR('',#278634); +#278677 = OVER_RIDING_STYLED_ITEM('overriding color',(#278678),#67190, + #278616); +#278678 = PRESENTATION_STYLE_ASSIGNMENT((#278679)); +#278679 = SURFACE_STYLE_USAGE(.BOTH.,#278680); +#278680 = SURFACE_SIDE_STYLE('',(#278681)); +#278681 = SURFACE_STYLE_FILL_AREA(#278682); +#278682 = FILL_AREA_STYLE('',(#278683)); +#278683 = FILL_AREA_STYLE_COLOUR('',#278634); +#278684 = OVER_RIDING_STYLED_ITEM('overriding color',(#278685),#67214, + #278616); +#278685 = PRESENTATION_STYLE_ASSIGNMENT((#278686)); +#278686 = SURFACE_STYLE_USAGE(.BOTH.,#278687); +#278687 = SURFACE_SIDE_STYLE('',(#278688)); +#278688 = SURFACE_STYLE_FILL_AREA(#278689); +#278689 = FILL_AREA_STYLE('',(#278690)); +#278690 = FILL_AREA_STYLE_COLOUR('',#278634); +#278691 = OVER_RIDING_STYLED_ITEM('overriding color',(#278692),#67272, + #278616); +#278692 = PRESENTATION_STYLE_ASSIGNMENT((#278693)); +#278693 = SURFACE_STYLE_USAGE(.BOTH.,#278694); +#278694 = SURFACE_SIDE_STYLE('',(#278695)); +#278695 = SURFACE_STYLE_FILL_AREA(#278696); +#278696 = FILL_AREA_STYLE('',(#278697)); +#278697 = FILL_AREA_STYLE_COLOUR('',#278634); +#278698 = OVER_RIDING_STYLED_ITEM('overriding color',(#278699),#67330, + #278616); +#278699 = PRESENTATION_STYLE_ASSIGNMENT((#278700)); +#278700 = SURFACE_STYLE_USAGE(.BOTH.,#278701); +#278701 = SURFACE_SIDE_STYLE('',(#278702)); +#278702 = SURFACE_STYLE_FILL_AREA(#278703); +#278703 = FILL_AREA_STYLE('',(#278704)); +#278704 = FILL_AREA_STYLE_COLOUR('',#278634); +#278705 = OVER_RIDING_STYLED_ITEM('overriding color',(#278706),#67355, + #278616); +#278706 = PRESENTATION_STYLE_ASSIGNMENT((#278707)); +#278707 = SURFACE_STYLE_USAGE(.BOTH.,#278708); +#278708 = SURFACE_SIDE_STYLE('',(#278709)); +#278709 = SURFACE_STYLE_FILL_AREA(#278710); +#278710 = FILL_AREA_STYLE('',(#278711)); +#278711 = FILL_AREA_STYLE_COLOUR('',#278634); +#278712 = OVER_RIDING_STYLED_ITEM('overriding color',(#278713),#67380, + #278616); +#278713 = PRESENTATION_STYLE_ASSIGNMENT((#278714)); +#278714 = SURFACE_STYLE_USAGE(.BOTH.,#278715); +#278715 = SURFACE_SIDE_STYLE('',(#278716)); +#278716 = SURFACE_STYLE_FILL_AREA(#278717); +#278717 = FILL_AREA_STYLE('',(#278718)); +#278718 = FILL_AREA_STYLE_COLOUR('',#278634); +#278719 = OVER_RIDING_STYLED_ITEM('overriding color',(#278720),#67437, + #278616); +#278720 = PRESENTATION_STYLE_ASSIGNMENT((#278721)); +#278721 = SURFACE_STYLE_USAGE(.BOTH.,#278722); +#278722 = SURFACE_SIDE_STYLE('',(#278723)); +#278723 = SURFACE_STYLE_FILL_AREA(#278724); +#278724 = FILL_AREA_STYLE('',(#278725)); +#278725 = FILL_AREA_STYLE_COLOUR('',#278634); +#278726 = OVER_RIDING_STYLED_ITEM('overriding color',(#278727),#67494, + #278616); +#278727 = PRESENTATION_STYLE_ASSIGNMENT((#278728)); +#278728 = SURFACE_STYLE_USAGE(.BOTH.,#278729); +#278729 = SURFACE_SIDE_STYLE('',(#278730)); +#278730 = SURFACE_STYLE_FILL_AREA(#278731); +#278731 = FILL_AREA_STYLE('',(#278732)); +#278732 = FILL_AREA_STYLE_COLOUR('',#278634); +#278733 = OVER_RIDING_STYLED_ITEM('overriding color',(#278734),#67518, + #278616); +#278734 = PRESENTATION_STYLE_ASSIGNMENT((#278735)); +#278735 = SURFACE_STYLE_USAGE(.BOTH.,#278736); +#278736 = SURFACE_SIDE_STYLE('',(#278737)); +#278737 = SURFACE_STYLE_FILL_AREA(#278738); +#278738 = FILL_AREA_STYLE('',(#278739)); +#278739 = FILL_AREA_STYLE_COLOUR('',#278634); +#278740 = OVER_RIDING_STYLED_ITEM('overriding color',(#278741),#67542, + #278616); +#278741 = PRESENTATION_STYLE_ASSIGNMENT((#278742)); +#278742 = SURFACE_STYLE_USAGE(.BOTH.,#278743); +#278743 = SURFACE_SIDE_STYLE('',(#278744)); +#278744 = SURFACE_STYLE_FILL_AREA(#278745); +#278745 = FILL_AREA_STYLE('',(#278746)); +#278746 = FILL_AREA_STYLE_COLOUR('',#278634); +#278747 = OVER_RIDING_STYLED_ITEM('overriding color',(#278748),#67575, + #278616); +#278748 = PRESENTATION_STYLE_ASSIGNMENT((#278749)); +#278749 = SURFACE_STYLE_USAGE(.BOTH.,#278750); +#278750 = SURFACE_SIDE_STYLE('',(#278751)); +#278751 = SURFACE_STYLE_FILL_AREA(#278752); +#278752 = FILL_AREA_STYLE('',(#278753)); +#278753 = FILL_AREA_STYLE_COLOUR('',#278634); +#278754 = OVER_RIDING_STYLED_ITEM('overriding color',(#278755),#67608, + #278616); +#278755 = PRESENTATION_STYLE_ASSIGNMENT((#278756)); +#278756 = SURFACE_STYLE_USAGE(.BOTH.,#278757); +#278757 = SURFACE_SIDE_STYLE('',(#278758)); +#278758 = SURFACE_STYLE_FILL_AREA(#278759); +#278759 = FILL_AREA_STYLE('',(#278760)); +#278760 = FILL_AREA_STYLE_COLOUR('',#278634); +#278761 = OVER_RIDING_STYLED_ITEM('overriding color',(#278762),#67640, + #278616); +#278762 = PRESENTATION_STYLE_ASSIGNMENT((#278763)); +#278763 = SURFACE_STYLE_USAGE(.BOTH.,#278764); +#278764 = SURFACE_SIDE_STYLE('',(#278765)); +#278765 = SURFACE_STYLE_FILL_AREA(#278766); +#278766 = FILL_AREA_STYLE('',(#278767)); +#278767 = FILL_AREA_STYLE_COLOUR('',#278634); +#278768 = OVER_RIDING_STYLED_ITEM('overriding color',(#278769),#67672, + #278616); +#278769 = PRESENTATION_STYLE_ASSIGNMENT((#278770)); +#278770 = SURFACE_STYLE_USAGE(.BOTH.,#278771); +#278771 = SURFACE_SIDE_STYLE('',(#278772)); +#278772 = SURFACE_STYLE_FILL_AREA(#278773); +#278773 = FILL_AREA_STYLE('',(#278774)); +#278774 = FILL_AREA_STYLE_COLOUR('',#278634); +#278775 = OVER_RIDING_STYLED_ITEM('overriding color',(#278776),#67696, + #278616); +#278776 = PRESENTATION_STYLE_ASSIGNMENT((#278777)); +#278777 = SURFACE_STYLE_USAGE(.BOTH.,#278778); +#278778 = SURFACE_SIDE_STYLE('',(#278779)); +#278779 = SURFACE_STYLE_FILL_AREA(#278780); +#278780 = FILL_AREA_STYLE('',(#278781)); +#278781 = FILL_AREA_STYLE_COLOUR('',#278634); +#278782 = OVER_RIDING_STYLED_ITEM('overriding color',(#278783),#67713, + #278616); +#278783 = PRESENTATION_STYLE_ASSIGNMENT((#278784)); +#278784 = SURFACE_STYLE_USAGE(.BOTH.,#278785); +#278785 = SURFACE_SIDE_STYLE('',(#278786)); +#278786 = SURFACE_STYLE_FILL_AREA(#278787); +#278787 = FILL_AREA_STYLE('',(#278788)); +#278788 = FILL_AREA_STYLE_COLOUR('',#278634); +#278789 = OVER_RIDING_STYLED_ITEM('overriding color',(#278790),#67739, + #278616); +#278790 = PRESENTATION_STYLE_ASSIGNMENT((#278791)); +#278791 = SURFACE_STYLE_USAGE(.BOTH.,#278792); +#278792 = SURFACE_SIDE_STYLE('',(#278793)); +#278793 = SURFACE_STYLE_FILL_AREA(#278794); +#278794 = FILL_AREA_STYLE('',(#278795)); +#278795 = FILL_AREA_STYLE_COLOUR('',#278634); +#278796 = OVER_RIDING_STYLED_ITEM('overriding color',(#278797),#67765, + #278616); +#278797 = PRESENTATION_STYLE_ASSIGNMENT((#278798)); +#278798 = SURFACE_STYLE_USAGE(.BOTH.,#278799); +#278799 = SURFACE_SIDE_STYLE('',(#278800)); +#278800 = SURFACE_STYLE_FILL_AREA(#278801); +#278801 = FILL_AREA_STYLE('',(#278802)); +#278802 = FILL_AREA_STYLE_COLOUR('',#278634); +#278803 = OVER_RIDING_STYLED_ITEM('overriding color',(#278804),#67797, + #278616); +#278804 = PRESENTATION_STYLE_ASSIGNMENT((#278805)); +#278805 = SURFACE_STYLE_USAGE(.BOTH.,#278806); +#278806 = SURFACE_SIDE_STYLE('',(#278807)); +#278807 = SURFACE_STYLE_FILL_AREA(#278808); +#278808 = FILL_AREA_STYLE('',(#278809)); +#278809 = FILL_AREA_STYLE_COLOUR('',#278634); +#278810 = OVER_RIDING_STYLED_ITEM('overriding color',(#278811),#67872, + #278616); +#278811 = PRESENTATION_STYLE_ASSIGNMENT((#278812)); +#278812 = SURFACE_STYLE_USAGE(.BOTH.,#278813); +#278813 = SURFACE_SIDE_STYLE('',(#278814)); +#278814 = SURFACE_STYLE_FILL_AREA(#278815); +#278815 = FILL_AREA_STYLE('',(#278816)); +#278816 = FILL_AREA_STYLE_COLOUR('',#278634); +#278817 = OVER_RIDING_STYLED_ITEM('overriding color',(#278818),#67954, + #278616); +#278818 = PRESENTATION_STYLE_ASSIGNMENT((#278819)); +#278819 = SURFACE_STYLE_USAGE(.BOTH.,#278820); +#278820 = SURFACE_SIDE_STYLE('',(#278821)); +#278821 = SURFACE_STYLE_FILL_AREA(#278822); +#278822 = FILL_AREA_STYLE('',(#278823)); +#278823 = FILL_AREA_STYLE_COLOUR('',#278634); +#278824 = OVER_RIDING_STYLED_ITEM('overriding color',(#278825),#67979, + #278616); +#278825 = PRESENTATION_STYLE_ASSIGNMENT((#278826)); +#278826 = SURFACE_STYLE_USAGE(.BOTH.,#278827); +#278827 = SURFACE_SIDE_STYLE('',(#278828)); +#278828 = SURFACE_STYLE_FILL_AREA(#278829); +#278829 = FILL_AREA_STYLE('',(#278830)); +#278830 = FILL_AREA_STYLE_COLOUR('',#278634); +#278831 = OVER_RIDING_STYLED_ITEM('overriding color',(#278832),#67996, + #278616); +#278832 = PRESENTATION_STYLE_ASSIGNMENT((#278833)); +#278833 = SURFACE_STYLE_USAGE(.BOTH.,#278834); +#278834 = SURFACE_SIDE_STYLE('',(#278835)); +#278835 = SURFACE_STYLE_FILL_AREA(#278836); +#278836 = FILL_AREA_STYLE('',(#278837)); +#278837 = FILL_AREA_STYLE_COLOUR('',#278634); +#278838 = OVER_RIDING_STYLED_ITEM('overriding color',(#278839),#68028, + #278616); +#278839 = PRESENTATION_STYLE_ASSIGNMENT((#278840)); +#278840 = SURFACE_STYLE_USAGE(.BOTH.,#278841); +#278841 = SURFACE_SIDE_STYLE('',(#278842)); +#278842 = SURFACE_STYLE_FILL_AREA(#278843); +#278843 = FILL_AREA_STYLE('',(#278844)); +#278844 = FILL_AREA_STYLE_COLOUR('',#278634); +#278845 = OVER_RIDING_STYLED_ITEM('overriding color',(#278846),#68113, + #278616); +#278846 = PRESENTATION_STYLE_ASSIGNMENT((#278847)); +#278847 = SURFACE_STYLE_USAGE(.BOTH.,#278848); +#278848 = SURFACE_SIDE_STYLE('',(#278849)); +#278849 = SURFACE_STYLE_FILL_AREA(#278850); +#278850 = FILL_AREA_STYLE('',(#278851)); +#278851 = FILL_AREA_STYLE_COLOUR('',#278634); +#278852 = OVER_RIDING_STYLED_ITEM('overriding color',(#278853),#68130, + #278616); +#278853 = PRESENTATION_STYLE_ASSIGNMENT((#278854)); +#278854 = SURFACE_STYLE_USAGE(.BOTH.,#278855); +#278855 = SURFACE_SIDE_STYLE('',(#278856)); +#278856 = SURFACE_STYLE_FILL_AREA(#278857); +#278857 = FILL_AREA_STYLE('',(#278858)); +#278858 = FILL_AREA_STYLE_COLOUR('',#278634); +#278859 = OVER_RIDING_STYLED_ITEM('overriding color',(#278860),#68184, + #278616); +#278860 = PRESENTATION_STYLE_ASSIGNMENT((#278861)); +#278861 = SURFACE_STYLE_USAGE(.BOTH.,#278862); +#278862 = SURFACE_SIDE_STYLE('',(#278863)); +#278863 = SURFACE_STYLE_FILL_AREA(#278864); +#278864 = FILL_AREA_STYLE('',(#278865)); +#278865 = FILL_AREA_STYLE_COLOUR('',#278634); +#278866 = OVER_RIDING_STYLED_ITEM('overriding color',(#278867),#68201, + #278616); +#278867 = PRESENTATION_STYLE_ASSIGNMENT((#278868)); +#278868 = SURFACE_STYLE_USAGE(.BOTH.,#278869); +#278869 = SURFACE_SIDE_STYLE('',(#278870)); +#278870 = SURFACE_STYLE_FILL_AREA(#278871); +#278871 = FILL_AREA_STYLE('',(#278872)); +#278872 = FILL_AREA_STYLE_COLOUR('',#278634); +#278873 = OVER_RIDING_STYLED_ITEM('overriding color',(#278874),#68288, + #278616); +#278874 = PRESENTATION_STYLE_ASSIGNMENT((#278875)); +#278875 = SURFACE_STYLE_USAGE(.BOTH.,#278876); +#278876 = SURFACE_SIDE_STYLE('',(#278877)); +#278877 = SURFACE_STYLE_FILL_AREA(#278878); +#278878 = FILL_AREA_STYLE('',(#278879)); +#278879 = FILL_AREA_STYLE_COLOUR('',#278634); +#278880 = OVER_RIDING_STYLED_ITEM('overriding color',(#278881),#68313, + #278616); +#278881 = PRESENTATION_STYLE_ASSIGNMENT((#278882)); +#278882 = SURFACE_STYLE_USAGE(.BOTH.,#278883); +#278883 = SURFACE_SIDE_STYLE('',(#278884)); +#278884 = SURFACE_STYLE_FILL_AREA(#278885); +#278885 = FILL_AREA_STYLE('',(#278886)); +#278886 = FILL_AREA_STYLE_COLOUR('',#278634); +#278887 = OVER_RIDING_STYLED_ITEM('overriding color',(#278888),#68330, + #278616); +#278888 = PRESENTATION_STYLE_ASSIGNMENT((#278889)); +#278889 = SURFACE_STYLE_USAGE(.BOTH.,#278890); +#278890 = SURFACE_SIDE_STYLE('',(#278891)); +#278891 = SURFACE_STYLE_FILL_AREA(#278892); +#278892 = FILL_AREA_STYLE('',(#278893)); +#278893 = FILL_AREA_STYLE_COLOUR('',#278634); +#278894 = OVER_RIDING_STYLED_ITEM('overriding color',(#278895),#68347, + #278616); +#278895 = PRESENTATION_STYLE_ASSIGNMENT((#278896)); +#278896 = SURFACE_STYLE_USAGE(.BOTH.,#278897); +#278897 = SURFACE_SIDE_STYLE('',(#278898)); +#278898 = SURFACE_STYLE_FILL_AREA(#278899); +#278899 = FILL_AREA_STYLE('',(#278900)); +#278900 = FILL_AREA_STYLE_COLOUR('',#278634); +#278901 = OVER_RIDING_STYLED_ITEM('overriding color',(#278902),#68364, + #278616); +#278902 = PRESENTATION_STYLE_ASSIGNMENT((#278903)); +#278903 = SURFACE_STYLE_USAGE(.BOTH.,#278904); +#278904 = SURFACE_SIDE_STYLE('',(#278905)); +#278905 = SURFACE_STYLE_FILL_AREA(#278906); +#278906 = FILL_AREA_STYLE('',(#278907)); +#278907 = FILL_AREA_STYLE_COLOUR('',#278634); +#278908 = OVER_RIDING_STYLED_ITEM('overriding color',(#278909),#68376, + #278616); +#278909 = PRESENTATION_STYLE_ASSIGNMENT((#278910)); +#278910 = SURFACE_STYLE_USAGE(.BOTH.,#278911); +#278911 = SURFACE_SIDE_STYLE('',(#278912)); +#278912 = SURFACE_STYLE_FILL_AREA(#278913); +#278913 = FILL_AREA_STYLE('',(#278914)); +#278914 = FILL_AREA_STYLE_COLOUR('',#278634); +#278915 = OVER_RIDING_STYLED_ITEM('overriding color',(#278916),#68393, + #278616); +#278916 = PRESENTATION_STYLE_ASSIGNMENT((#278917)); +#278917 = SURFACE_STYLE_USAGE(.BOTH.,#278918); +#278918 = SURFACE_SIDE_STYLE('',(#278919)); +#278919 = SURFACE_STYLE_FILL_AREA(#278920); +#278920 = FILL_AREA_STYLE('',(#278921)); +#278921 = FILL_AREA_STYLE_COLOUR('',#278634); +#278922 = OVER_RIDING_STYLED_ITEM('overriding color',(#278923),#68405, + #278616); +#278923 = PRESENTATION_STYLE_ASSIGNMENT((#278924)); +#278924 = SURFACE_STYLE_USAGE(.BOTH.,#278925); +#278925 = SURFACE_SIDE_STYLE('',(#278926)); +#278926 = SURFACE_STYLE_FILL_AREA(#278927); +#278927 = FILL_AREA_STYLE('',(#278928)); +#278928 = FILL_AREA_STYLE_COLOUR('',#278634); +#278929 = OVER_RIDING_STYLED_ITEM('overriding color',(#278930),#68422, + #278616); +#278930 = PRESENTATION_STYLE_ASSIGNMENT((#278931)); +#278931 = SURFACE_STYLE_USAGE(.BOTH.,#278932); +#278932 = SURFACE_SIDE_STYLE('',(#278933)); +#278933 = SURFACE_STYLE_FILL_AREA(#278934); +#278934 = FILL_AREA_STYLE('',(#278935)); +#278935 = FILL_AREA_STYLE_COLOUR('',#278634); +#278936 = OVER_RIDING_STYLED_ITEM('overriding color',(#278937),#68439, + #278616); +#278937 = PRESENTATION_STYLE_ASSIGNMENT((#278938)); +#278938 = SURFACE_STYLE_USAGE(.BOTH.,#278939); +#278939 = SURFACE_SIDE_STYLE('',(#278940)); +#278940 = SURFACE_STYLE_FILL_AREA(#278941); +#278941 = FILL_AREA_STYLE('',(#278942)); +#278942 = FILL_AREA_STYLE_COLOUR('',#278634); +#278943 = OVER_RIDING_STYLED_ITEM('overriding color',(#278944),#68456, + #278616); +#278944 = PRESENTATION_STYLE_ASSIGNMENT((#278945)); +#278945 = SURFACE_STYLE_USAGE(.BOTH.,#278946); +#278946 = SURFACE_SIDE_STYLE('',(#278947)); +#278947 = SURFACE_STYLE_FILL_AREA(#278948); +#278948 = FILL_AREA_STYLE('',(#278949)); +#278949 = FILL_AREA_STYLE_COLOUR('',#278634); +#278950 = OVER_RIDING_STYLED_ITEM('overriding color',(#278951),#68481, + #278616); +#278951 = PRESENTATION_STYLE_ASSIGNMENT((#278952)); +#278952 = SURFACE_STYLE_USAGE(.BOTH.,#278953); +#278953 = SURFACE_SIDE_STYLE('',(#278954)); +#278954 = SURFACE_STYLE_FILL_AREA(#278955); +#278955 = FILL_AREA_STYLE('',(#278956)); +#278956 = FILL_AREA_STYLE_COLOUR('',#278634); +#278957 = OVER_RIDING_STYLED_ITEM('overriding color',(#278958),#68506, + #278616); +#278958 = PRESENTATION_STYLE_ASSIGNMENT((#278959)); +#278959 = SURFACE_STYLE_USAGE(.BOTH.,#278960); +#278960 = SURFACE_SIDE_STYLE('',(#278961)); +#278961 = SURFACE_STYLE_FILL_AREA(#278962); +#278962 = FILL_AREA_STYLE('',(#278963)); +#278963 = FILL_AREA_STYLE_COLOUR('',#278634); +#278964 = OVER_RIDING_STYLED_ITEM('overriding color',(#278965),#68537, + #278616); +#278965 = PRESENTATION_STYLE_ASSIGNMENT((#278966)); +#278966 = SURFACE_STYLE_USAGE(.BOTH.,#278967); +#278967 = SURFACE_SIDE_STYLE('',(#278968)); +#278968 = SURFACE_STYLE_FILL_AREA(#278969); +#278969 = FILL_AREA_STYLE('',(#278970)); +#278970 = FILL_AREA_STYLE_COLOUR('',#278634); +#278971 = OVER_RIDING_STYLED_ITEM('overriding color',(#278972),#68562, + #278616); +#278972 = PRESENTATION_STYLE_ASSIGNMENT((#278973)); +#278973 = SURFACE_STYLE_USAGE(.BOTH.,#278974); +#278974 = SURFACE_SIDE_STYLE('',(#278975)); +#278975 = SURFACE_STYLE_FILL_AREA(#278976); +#278976 = FILL_AREA_STYLE('',(#278977)); +#278977 = FILL_AREA_STYLE_COLOUR('',#278634); +#278978 = OVER_RIDING_STYLED_ITEM('overriding color',(#278979),#68593, + #278616); +#278979 = PRESENTATION_STYLE_ASSIGNMENT((#278980)); +#278980 = SURFACE_STYLE_USAGE(.BOTH.,#278981); +#278981 = SURFACE_SIDE_STYLE('',(#278982)); +#278982 = SURFACE_STYLE_FILL_AREA(#278983); +#278983 = FILL_AREA_STYLE('',(#278984)); +#278984 = FILL_AREA_STYLE_COLOUR('',#278634); +#278985 = OVER_RIDING_STYLED_ITEM('overriding color',(#278986),#68618, + #278616); +#278986 = PRESENTATION_STYLE_ASSIGNMENT((#278987)); +#278987 = SURFACE_STYLE_USAGE(.BOTH.,#278988); +#278988 = SURFACE_SIDE_STYLE('',(#278989)); +#278989 = SURFACE_STYLE_FILL_AREA(#278990); +#278990 = FILL_AREA_STYLE('',(#278991)); +#278991 = FILL_AREA_STYLE_COLOUR('',#278634); +#278992 = OVER_RIDING_STYLED_ITEM('overriding color',(#278993),#68643, + #278616); +#278993 = PRESENTATION_STYLE_ASSIGNMENT((#278994)); +#278994 = SURFACE_STYLE_USAGE(.BOTH.,#278995); +#278995 = SURFACE_SIDE_STYLE('',(#278996)); +#278996 = SURFACE_STYLE_FILL_AREA(#278997); +#278997 = FILL_AREA_STYLE('',(#278998)); +#278998 = FILL_AREA_STYLE_COLOUR('',#278634); +#278999 = OVER_RIDING_STYLED_ITEM('overriding color',(#279000),#68668, + #278616); +#279000 = PRESENTATION_STYLE_ASSIGNMENT((#279001)); +#279001 = SURFACE_STYLE_USAGE(.BOTH.,#279002); +#279002 = SURFACE_SIDE_STYLE('',(#279003)); +#279003 = SURFACE_STYLE_FILL_AREA(#279004); +#279004 = FILL_AREA_STYLE('',(#279005)); +#279005 = FILL_AREA_STYLE_COLOUR('',#278634); +#279006 = OVER_RIDING_STYLED_ITEM('overriding color',(#279007),#68698, + #278616); +#279007 = PRESENTATION_STYLE_ASSIGNMENT((#279008)); +#279008 = SURFACE_STYLE_USAGE(.BOTH.,#279009); +#279009 = SURFACE_SIDE_STYLE('',(#279010)); +#279010 = SURFACE_STYLE_FILL_AREA(#279011); +#279011 = FILL_AREA_STYLE('',(#279012)); +#279012 = FILL_AREA_STYLE_COLOUR('',#278634); +#279013 = OVER_RIDING_STYLED_ITEM('overriding color',(#279014),#68715, + #278616); +#279014 = PRESENTATION_STYLE_ASSIGNMENT((#279015)); +#279015 = SURFACE_STYLE_USAGE(.BOTH.,#279016); +#279016 = SURFACE_SIDE_STYLE('',(#279017)); +#279017 = SURFACE_STYLE_FILL_AREA(#279018); +#279018 = FILL_AREA_STYLE('',(#279019)); +#279019 = FILL_AREA_STYLE_COLOUR('',#278634); +#279020 = OVER_RIDING_STYLED_ITEM('overriding color',(#279021),#68732, + #278616); +#279021 = PRESENTATION_STYLE_ASSIGNMENT((#279022)); +#279022 = SURFACE_STYLE_USAGE(.BOTH.,#279023); +#279023 = SURFACE_SIDE_STYLE('',(#279024)); +#279024 = SURFACE_STYLE_FILL_AREA(#279025); +#279025 = FILL_AREA_STYLE('',(#279026)); +#279026 = FILL_AREA_STYLE_COLOUR('',#278634); +#279027 = OVER_RIDING_STYLED_ITEM('overriding color',(#279028),#68805, + #278616); +#279028 = PRESENTATION_STYLE_ASSIGNMENT((#279029)); +#279029 = SURFACE_STYLE_USAGE(.BOTH.,#279030); +#279030 = SURFACE_SIDE_STYLE('',(#279031)); +#279031 = SURFACE_STYLE_FILL_AREA(#279032); +#279032 = FILL_AREA_STYLE('',(#279033)); +#279033 = FILL_AREA_STYLE_COLOUR('',#278634); +#279034 = OVER_RIDING_STYLED_ITEM('overriding color',(#279035),#68897, + #278616); +#279035 = PRESENTATION_STYLE_ASSIGNMENT((#279036)); +#279036 = SURFACE_STYLE_USAGE(.BOTH.,#279037); +#279037 = SURFACE_SIDE_STYLE('',(#279038)); +#279038 = SURFACE_STYLE_FILL_AREA(#279039); +#279039 = FILL_AREA_STYLE('',(#279040)); +#279040 = FILL_AREA_STYLE_COLOUR('',#278634); +#279041 = OVER_RIDING_STYLED_ITEM('overriding color',(#279042),#68989, + #278616); +#279042 = PRESENTATION_STYLE_ASSIGNMENT((#279043)); +#279043 = SURFACE_STYLE_USAGE(.BOTH.,#279044); +#279044 = SURFACE_SIDE_STYLE('',(#279045)); +#279045 = SURFACE_STYLE_FILL_AREA(#279046); +#279046 = FILL_AREA_STYLE('',(#279047)); +#279047 = FILL_AREA_STYLE_COLOUR('',#278634); +#279048 = OVER_RIDING_STYLED_ITEM('overriding color',(#279049),#69062, + #278616); +#279049 = PRESENTATION_STYLE_ASSIGNMENT((#279050)); +#279050 = SURFACE_STYLE_USAGE(.BOTH.,#279051); +#279051 = SURFACE_SIDE_STYLE('',(#279052)); +#279052 = SURFACE_STYLE_FILL_AREA(#279053); +#279053 = FILL_AREA_STYLE('',(#279054)); +#279054 = FILL_AREA_STYLE_COLOUR('',#278634); +#279055 = OVER_RIDING_STYLED_ITEM('overriding color',(#279056),#69084, + #278616); +#279056 = PRESENTATION_STYLE_ASSIGNMENT((#279057)); +#279057 = SURFACE_STYLE_USAGE(.BOTH.,#279058); +#279058 = SURFACE_SIDE_STYLE('',(#279059)); +#279059 = SURFACE_STYLE_FILL_AREA(#279060); +#279060 = FILL_AREA_STYLE('',(#279061)); +#279061 = FILL_AREA_STYLE_COLOUR('',#278634); +#279062 = OVER_RIDING_STYLED_ITEM('overriding color',(#279063),#69096, + #278616); +#279063 = PRESENTATION_STYLE_ASSIGNMENT((#279064)); +#279064 = SURFACE_STYLE_USAGE(.BOTH.,#279065); +#279065 = SURFACE_SIDE_STYLE('',(#279066)); +#279066 = SURFACE_STYLE_FILL_AREA(#279067); +#279067 = FILL_AREA_STYLE('',(#279068)); +#279068 = FILL_AREA_STYLE_COLOUR('',#278634); +#279069 = OVER_RIDING_STYLED_ITEM('overriding color',(#279070),#69169, + #278616); +#279070 = PRESENTATION_STYLE_ASSIGNMENT((#279071)); +#279071 = SURFACE_STYLE_USAGE(.BOTH.,#279072); +#279072 = SURFACE_SIDE_STYLE('',(#279073)); +#279073 = SURFACE_STYLE_FILL_AREA(#279074); +#279074 = FILL_AREA_STYLE('',(#279075)); +#279075 = FILL_AREA_STYLE_COLOUR('',#278634); +#279076 = OVER_RIDING_STYLED_ITEM('overriding color',(#279077),#69261, + #278616); +#279077 = PRESENTATION_STYLE_ASSIGNMENT((#279078)); +#279078 = SURFACE_STYLE_USAGE(.BOTH.,#279079); +#279079 = SURFACE_SIDE_STYLE('',(#279080)); +#279080 = SURFACE_STYLE_FILL_AREA(#279081); +#279081 = FILL_AREA_STYLE('',(#279082)); +#279082 = FILL_AREA_STYLE_COLOUR('',#278634); +#279083 = OVER_RIDING_STYLED_ITEM('overriding color',(#279084),#69278, + #278616); +#279084 = PRESENTATION_STYLE_ASSIGNMENT((#279085)); +#279085 = SURFACE_STYLE_USAGE(.BOTH.,#279086); +#279086 = SURFACE_SIDE_STYLE('',(#279087)); +#279087 = SURFACE_STYLE_FILL_AREA(#279088); +#279088 = FILL_AREA_STYLE('',(#279089)); +#279089 = FILL_AREA_STYLE_COLOUR('',#278634); +#279090 = OVER_RIDING_STYLED_ITEM('overriding color',(#279091),#69295, + #278616); +#279091 = PRESENTATION_STYLE_ASSIGNMENT((#279092)); +#279092 = SURFACE_STYLE_USAGE(.BOTH.,#279093); +#279093 = SURFACE_SIDE_STYLE('',(#279094)); +#279094 = SURFACE_STYLE_FILL_AREA(#279095); +#279095 = FILL_AREA_STYLE('',(#279096)); +#279096 = FILL_AREA_STYLE_COLOUR('',#278634); +#279097 = OVER_RIDING_STYLED_ITEM('overriding color',(#279098),#69387, + #278616); +#279098 = PRESENTATION_STYLE_ASSIGNMENT((#279099)); +#279099 = SURFACE_STYLE_USAGE(.BOTH.,#279100); +#279100 = SURFACE_SIDE_STYLE('',(#279101)); +#279101 = SURFACE_STYLE_FILL_AREA(#279102); +#279102 = FILL_AREA_STYLE('',(#279103)); +#279103 = FILL_AREA_STYLE_COLOUR('',#278634); +#279104 = OVER_RIDING_STYLED_ITEM('overriding color',(#279105),#69460, + #278616); +#279105 = PRESENTATION_STYLE_ASSIGNMENT((#279106)); +#279106 = SURFACE_STYLE_USAGE(.BOTH.,#279107); +#279107 = SURFACE_SIDE_STYLE('',(#279108)); +#279108 = SURFACE_STYLE_FILL_AREA(#279109); +#279109 = FILL_AREA_STYLE('',(#279110)); +#279110 = FILL_AREA_STYLE_COLOUR('',#278634); +#279111 = OVER_RIDING_STYLED_ITEM('overriding color',(#279112),#69477, + #278616); +#279112 = PRESENTATION_STYLE_ASSIGNMENT((#279113)); +#279113 = SURFACE_STYLE_USAGE(.BOTH.,#279114); +#279114 = SURFACE_SIDE_STYLE('',(#279115)); +#279115 = SURFACE_STYLE_FILL_AREA(#279116); +#279116 = FILL_AREA_STYLE('',(#279117)); +#279117 = FILL_AREA_STYLE_COLOUR('',#278634); +#279118 = OVER_RIDING_STYLED_ITEM('overriding color',(#279119),#69494, + #278616); +#279119 = PRESENTATION_STYLE_ASSIGNMENT((#279120)); +#279120 = SURFACE_STYLE_USAGE(.BOTH.,#279121); +#279121 = SURFACE_SIDE_STYLE('',(#279122)); +#279122 = SURFACE_STYLE_FILL_AREA(#279123); +#279123 = FILL_AREA_STYLE('',(#279124)); +#279124 = FILL_AREA_STYLE_COLOUR('',#278634); +#279125 = OVER_RIDING_STYLED_ITEM('overriding color',(#279126),#69511, + #278616); +#279126 = PRESENTATION_STYLE_ASSIGNMENT((#279127)); +#279127 = SURFACE_STYLE_USAGE(.BOTH.,#279128); +#279128 = SURFACE_SIDE_STYLE('',(#279129)); +#279129 = SURFACE_STYLE_FILL_AREA(#279130); +#279130 = FILL_AREA_STYLE('',(#279131)); +#279131 = FILL_AREA_STYLE_COLOUR('',#278634); +#279132 = OVER_RIDING_STYLED_ITEM('overriding color',(#279133),#69528, + #278616); +#279133 = PRESENTATION_STYLE_ASSIGNMENT((#279134)); +#279134 = SURFACE_STYLE_USAGE(.BOTH.,#279135); +#279135 = SURFACE_SIDE_STYLE('',(#279136)); +#279136 = SURFACE_STYLE_FILL_AREA(#279137); +#279137 = FILL_AREA_STYLE('',(#279138)); +#279138 = FILL_AREA_STYLE_COLOUR('',#278634); +#279139 = OVER_RIDING_STYLED_ITEM('overriding color',(#279140),#69545, + #278616); +#279140 = PRESENTATION_STYLE_ASSIGNMENT((#279141)); +#279141 = SURFACE_STYLE_USAGE(.BOTH.,#279142); +#279142 = SURFACE_SIDE_STYLE('',(#279143)); +#279143 = SURFACE_STYLE_FILL_AREA(#279144); +#279144 = FILL_AREA_STYLE('',(#279145)); +#279145 = FILL_AREA_STYLE_COLOUR('',#278634); +#279146 = OVER_RIDING_STYLED_ITEM('overriding color',(#279147),#69562, + #278616); +#279147 = PRESENTATION_STYLE_ASSIGNMENT((#279148)); +#279148 = SURFACE_STYLE_USAGE(.BOTH.,#279149); +#279149 = SURFACE_SIDE_STYLE('',(#279150)); +#279150 = SURFACE_STYLE_FILL_AREA(#279151); +#279151 = FILL_AREA_STYLE('',(#279152)); +#279152 = FILL_AREA_STYLE_COLOUR('',#278634); +#279153 = OVER_RIDING_STYLED_ITEM('overriding color',(#279154),#69586, + #278616); +#279154 = PRESENTATION_STYLE_ASSIGNMENT((#279155)); +#279155 = SURFACE_STYLE_USAGE(.BOTH.,#279156); +#279156 = SURFACE_SIDE_STYLE('',(#279157)); +#279157 = SURFACE_STYLE_FILL_AREA(#279158); +#279158 = FILL_AREA_STYLE('',(#279159)); +#279159 = FILL_AREA_STYLE_COLOUR('',#278634); +#279160 = OVER_RIDING_STYLED_ITEM('overriding color',(#279161),#69610, + #278616); +#279161 = PRESENTATION_STYLE_ASSIGNMENT((#279162)); +#279162 = SURFACE_STYLE_USAGE(.BOTH.,#279163); +#279163 = SURFACE_SIDE_STYLE('',(#279164)); +#279164 = SURFACE_STYLE_FILL_AREA(#279165); +#279165 = FILL_AREA_STYLE('',(#279166)); +#279166 = FILL_AREA_STYLE_COLOUR('',#278634); +#279167 = OVER_RIDING_STYLED_ITEM('overriding color',(#279168),#69634, + #278616); +#279168 = PRESENTATION_STYLE_ASSIGNMENT((#279169)); +#279169 = SURFACE_STYLE_USAGE(.BOTH.,#279170); +#279170 = SURFACE_SIDE_STYLE('',(#279171)); +#279171 = SURFACE_STYLE_FILL_AREA(#279172); +#279172 = FILL_AREA_STYLE('',(#279173)); +#279173 = FILL_AREA_STYLE_COLOUR('',#278634); +#279174 = OVER_RIDING_STYLED_ITEM('overriding color',(#279175),#69651, + #278616); +#279175 = PRESENTATION_STYLE_ASSIGNMENT((#279176)); +#279176 = SURFACE_STYLE_USAGE(.BOTH.,#279177); +#279177 = SURFACE_SIDE_STYLE('',(#279178)); +#279178 = SURFACE_STYLE_FILL_AREA(#279179); +#279179 = FILL_AREA_STYLE('',(#279180)); +#279180 = FILL_AREA_STYLE_COLOUR('',#278634); +#279181 = OVER_RIDING_STYLED_ITEM('overriding color',(#279182),#69675, + #278616); +#279182 = PRESENTATION_STYLE_ASSIGNMENT((#279183)); +#279183 = SURFACE_STYLE_USAGE(.BOTH.,#279184); +#279184 = SURFACE_SIDE_STYLE('',(#279185)); +#279185 = SURFACE_STYLE_FILL_AREA(#279186); +#279186 = FILL_AREA_STYLE('',(#279187)); +#279187 = FILL_AREA_STYLE_COLOUR('',#278634); +#279188 = OVER_RIDING_STYLED_ITEM('overriding color',(#279189),#69692, + #278616); +#279189 = PRESENTATION_STYLE_ASSIGNMENT((#279190)); +#279190 = SURFACE_STYLE_USAGE(.BOTH.,#279191); +#279191 = SURFACE_SIDE_STYLE('',(#279192)); +#279192 = SURFACE_STYLE_FILL_AREA(#279193); +#279193 = FILL_AREA_STYLE('',(#279194)); +#279194 = FILL_AREA_STYLE_COLOUR('',#278634); +#279195 = OVER_RIDING_STYLED_ITEM('overriding color',(#279196),#69718, + #278616); +#279196 = PRESENTATION_STYLE_ASSIGNMENT((#279197)); +#279197 = SURFACE_STYLE_USAGE(.BOTH.,#279198); +#279198 = SURFACE_SIDE_STYLE('',(#279199)); +#279199 = SURFACE_STYLE_FILL_AREA(#279200); +#279200 = FILL_AREA_STYLE('',(#279201)); +#279201 = FILL_AREA_STYLE_COLOUR('',#278634); +#279202 = OVER_RIDING_STYLED_ITEM('overriding color',(#279203),#69744, + #278616); +#279203 = PRESENTATION_STYLE_ASSIGNMENT((#279204)); +#279204 = SURFACE_STYLE_USAGE(.BOTH.,#279205); +#279205 = SURFACE_SIDE_STYLE('',(#279206)); +#279206 = SURFACE_STYLE_FILL_AREA(#279207); +#279207 = FILL_AREA_STYLE('',(#279208)); +#279208 = FILL_AREA_STYLE_COLOUR('',#278634); +#279209 = OVER_RIDING_STYLED_ITEM('overriding color',(#279210),#69761, + #278616); +#279210 = PRESENTATION_STYLE_ASSIGNMENT((#279211)); +#279211 = SURFACE_STYLE_USAGE(.BOTH.,#279212); +#279212 = SURFACE_SIDE_STYLE('',(#279213)); +#279213 = SURFACE_STYLE_FILL_AREA(#279214); +#279214 = FILL_AREA_STYLE('',(#279215)); +#279215 = FILL_AREA_STYLE_COLOUR('',#278634); +#279216 = OVER_RIDING_STYLED_ITEM('overriding color',(#279217),#69783, + #278616); +#279217 = PRESENTATION_STYLE_ASSIGNMENT((#279218)); +#279218 = SURFACE_STYLE_USAGE(.BOTH.,#279219); +#279219 = SURFACE_SIDE_STYLE('',(#279220)); +#279220 = SURFACE_STYLE_FILL_AREA(#279221); +#279221 = FILL_AREA_STYLE('',(#279222)); +#279222 = FILL_AREA_STYLE_COLOUR('',#278634); +#279223 = OVER_RIDING_STYLED_ITEM('overriding color',(#279224),#69800, + #278616); +#279224 = PRESENTATION_STYLE_ASSIGNMENT((#279225)); +#279225 = SURFACE_STYLE_USAGE(.BOTH.,#279226); +#279226 = SURFACE_SIDE_STYLE('',(#279227)); +#279227 = SURFACE_STYLE_FILL_AREA(#279228); +#279228 = FILL_AREA_STYLE('',(#279229)); +#279229 = FILL_AREA_STYLE_COLOUR('',#278634); +#279230 = OVER_RIDING_STYLED_ITEM('overriding color',(#279231),#69831, + #278616); +#279231 = PRESENTATION_STYLE_ASSIGNMENT((#279232)); +#279232 = SURFACE_STYLE_USAGE(.BOTH.,#279233); +#279233 = SURFACE_SIDE_STYLE('',(#279234)); +#279234 = SURFACE_STYLE_FILL_AREA(#279235); +#279235 = FILL_AREA_STYLE('',(#279236)); +#279236 = FILL_AREA_STYLE_COLOUR('',#278634); +#279237 = OVER_RIDING_STYLED_ITEM('overriding color',(#279238),#69848, + #278616); +#279238 = PRESENTATION_STYLE_ASSIGNMENT((#279239)); +#279239 = SURFACE_STYLE_USAGE(.BOTH.,#279240); +#279240 = SURFACE_SIDE_STYLE('',(#279241)); +#279241 = SURFACE_STYLE_FILL_AREA(#279242); +#279242 = FILL_AREA_STYLE('',(#279243)); +#279243 = FILL_AREA_STYLE_COLOUR('',#278634); +#279244 = OVER_RIDING_STYLED_ITEM('overriding color',(#279245),#69865, + #278616); +#279245 = PRESENTATION_STYLE_ASSIGNMENT((#279246)); +#279246 = SURFACE_STYLE_USAGE(.BOTH.,#279247); +#279247 = SURFACE_SIDE_STYLE('',(#279248)); +#279248 = SURFACE_STYLE_FILL_AREA(#279249); +#279249 = FILL_AREA_STYLE('',(#279250)); +#279250 = FILL_AREA_STYLE_COLOUR('',#278634); +#279251 = OVER_RIDING_STYLED_ITEM('overriding color',(#279252),#69877, + #278616); +#279252 = PRESENTATION_STYLE_ASSIGNMENT((#279253)); +#279253 = SURFACE_STYLE_USAGE(.BOTH.,#279254); +#279254 = SURFACE_SIDE_STYLE('',(#279255)); +#279255 = SURFACE_STYLE_FILL_AREA(#279256); +#279256 = FILL_AREA_STYLE('',(#279257)); +#279257 = FILL_AREA_STYLE_COLOUR('',#278634); +#279258 = OVER_RIDING_STYLED_ITEM('overriding color',(#279259),#69894, + #278616); +#279259 = PRESENTATION_STYLE_ASSIGNMENT((#279260)); +#279260 = SURFACE_STYLE_USAGE(.BOTH.,#279261); +#279261 = SURFACE_SIDE_STYLE('',(#279262)); +#279262 = SURFACE_STYLE_FILL_AREA(#279263); +#279263 = FILL_AREA_STYLE('',(#279264)); +#279264 = FILL_AREA_STYLE_COLOUR('',#278634); +#279265 = OVER_RIDING_STYLED_ITEM('overriding color',(#279266),#69911, + #278616); +#279266 = PRESENTATION_STYLE_ASSIGNMENT((#279267)); +#279267 = SURFACE_STYLE_USAGE(.BOTH.,#279268); +#279268 = SURFACE_SIDE_STYLE('',(#279269)); +#279269 = SURFACE_STYLE_FILL_AREA(#279270); +#279270 = FILL_AREA_STYLE('',(#279271)); +#279271 = FILL_AREA_STYLE_COLOUR('',#278634); +#279272 = OVER_RIDING_STYLED_ITEM('overriding color',(#279273),#69928, + #278616); +#279273 = PRESENTATION_STYLE_ASSIGNMENT((#279274)); +#279274 = SURFACE_STYLE_USAGE(.BOTH.,#279275); +#279275 = SURFACE_SIDE_STYLE('',(#279276)); +#279276 = SURFACE_STYLE_FILL_AREA(#279277); +#279277 = FILL_AREA_STYLE('',(#279278)); +#279278 = FILL_AREA_STYLE_COLOUR('',#278634); +#279279 = OVER_RIDING_STYLED_ITEM('overriding color',(#279280),#69945, + #278616); +#279280 = PRESENTATION_STYLE_ASSIGNMENT((#279281)); +#279281 = SURFACE_STYLE_USAGE(.BOTH.,#279282); +#279282 = SURFACE_SIDE_STYLE('',(#279283)); +#279283 = SURFACE_STYLE_FILL_AREA(#279284); +#279284 = FILL_AREA_STYLE('',(#279285)); +#279285 = FILL_AREA_STYLE_COLOUR('',#278634); +#279286 = OVER_RIDING_STYLED_ITEM('overriding color',(#279287),#69962, + #278616); +#279287 = PRESENTATION_STYLE_ASSIGNMENT((#279288)); +#279288 = SURFACE_STYLE_USAGE(.BOTH.,#279289); +#279289 = SURFACE_SIDE_STYLE('',(#279290)); +#279290 = SURFACE_STYLE_FILL_AREA(#279291); +#279291 = FILL_AREA_STYLE('',(#279292)); +#279292 = FILL_AREA_STYLE_COLOUR('',#278634); +#279293 = OVER_RIDING_STYLED_ITEM('overriding color',(#279294),#69979, + #278616); +#279294 = PRESENTATION_STYLE_ASSIGNMENT((#279295)); +#279295 = SURFACE_STYLE_USAGE(.BOTH.,#279296); +#279296 = SURFACE_SIDE_STYLE('',(#279297)); +#279297 = SURFACE_STYLE_FILL_AREA(#279298); +#279298 = FILL_AREA_STYLE('',(#279299)); +#279299 = FILL_AREA_STYLE_COLOUR('',#278634); +#279300 = OVER_RIDING_STYLED_ITEM('overriding color',(#279301),#69996, + #278616); +#279301 = PRESENTATION_STYLE_ASSIGNMENT((#279302)); +#279302 = SURFACE_STYLE_USAGE(.BOTH.,#279303); +#279303 = SURFACE_SIDE_STYLE('',(#279304)); +#279304 = SURFACE_STYLE_FILL_AREA(#279305); +#279305 = FILL_AREA_STYLE('',(#279306)); +#279306 = FILL_AREA_STYLE_COLOUR('',#278634); +#279307 = OVER_RIDING_STYLED_ITEM('overriding color',(#279308),#70008, + #278616); +#279308 = PRESENTATION_STYLE_ASSIGNMENT((#279309)); +#279309 = SURFACE_STYLE_USAGE(.BOTH.,#279310); +#279310 = SURFACE_SIDE_STYLE('',(#279311)); +#279311 = SURFACE_STYLE_FILL_AREA(#279312); +#279312 = FILL_AREA_STYLE('',(#279313)); +#279313 = FILL_AREA_STYLE_COLOUR('',#278634); +#279314 = OVER_RIDING_STYLED_ITEM('overriding color',(#279315),#70025, + #278616); +#279315 = PRESENTATION_STYLE_ASSIGNMENT((#279316)); +#279316 = SURFACE_STYLE_USAGE(.BOTH.,#279317); +#279317 = SURFACE_SIDE_STYLE('',(#279318)); +#279318 = SURFACE_STYLE_FILL_AREA(#279319); +#279319 = FILL_AREA_STYLE('',(#279320)); +#279320 = FILL_AREA_STYLE_COLOUR('',#278634); +#279321 = OVER_RIDING_STYLED_ITEM('overriding color',(#279322),#70042, + #278616); +#279322 = PRESENTATION_STYLE_ASSIGNMENT((#279323)); +#279323 = SURFACE_STYLE_USAGE(.BOTH.,#279324); +#279324 = SURFACE_SIDE_STYLE('',(#279325)); +#279325 = SURFACE_STYLE_FILL_AREA(#279326); +#279326 = FILL_AREA_STYLE('',(#279327)); +#279327 = FILL_AREA_STYLE_COLOUR('',#278634); +#279328 = OVER_RIDING_STYLED_ITEM('overriding color',(#279329),#70059, + #278616); +#279329 = PRESENTATION_STYLE_ASSIGNMENT((#279330)); +#279330 = SURFACE_STYLE_USAGE(.BOTH.,#279331); +#279331 = SURFACE_SIDE_STYLE('',(#279332)); +#279332 = SURFACE_STYLE_FILL_AREA(#279333); +#279333 = FILL_AREA_STYLE('',(#279334)); +#279334 = FILL_AREA_STYLE_COLOUR('',#278634); +#279335 = OVER_RIDING_STYLED_ITEM('overriding color',(#279336),#70076, + #278616); +#279336 = PRESENTATION_STYLE_ASSIGNMENT((#279337)); +#279337 = SURFACE_STYLE_USAGE(.BOTH.,#279338); +#279338 = SURFACE_SIDE_STYLE('',(#279339)); +#279339 = SURFACE_STYLE_FILL_AREA(#279340); +#279340 = FILL_AREA_STYLE('',(#279341)); +#279341 = FILL_AREA_STYLE_COLOUR('',#278634); +#279342 = OVER_RIDING_STYLED_ITEM('overriding color',(#279343),#70093, + #278616); +#279343 = PRESENTATION_STYLE_ASSIGNMENT((#279344)); +#279344 = SURFACE_STYLE_USAGE(.BOTH.,#279345); +#279345 = SURFACE_SIDE_STYLE('',(#279346)); +#279346 = SURFACE_STYLE_FILL_AREA(#279347); +#279347 = FILL_AREA_STYLE('',(#279348)); +#279348 = FILL_AREA_STYLE_COLOUR('',#278634); +#279349 = OVER_RIDING_STYLED_ITEM('overriding color',(#279350),#70110, + #278616); +#279350 = PRESENTATION_STYLE_ASSIGNMENT((#279351)); +#279351 = SURFACE_STYLE_USAGE(.BOTH.,#279352); +#279352 = SURFACE_SIDE_STYLE('',(#279353)); +#279353 = SURFACE_STYLE_FILL_AREA(#279354); +#279354 = FILL_AREA_STYLE('',(#279355)); +#279355 = FILL_AREA_STYLE_COLOUR('',#278634); +#279356 = OVER_RIDING_STYLED_ITEM('overriding color',(#279357),#70127, + #278616); +#279357 = PRESENTATION_STYLE_ASSIGNMENT((#279358)); +#279358 = SURFACE_STYLE_USAGE(.BOTH.,#279359); +#279359 = SURFACE_SIDE_STYLE('',(#279360)); +#279360 = SURFACE_STYLE_FILL_AREA(#279361); +#279361 = FILL_AREA_STYLE('',(#279362)); +#279362 = FILL_AREA_STYLE_COLOUR('',#278634); +#279363 = OVER_RIDING_STYLED_ITEM('overriding color',(#279364),#70139, + #278616); +#279364 = PRESENTATION_STYLE_ASSIGNMENT((#279365)); +#279365 = SURFACE_STYLE_USAGE(.BOTH.,#279366); +#279366 = SURFACE_SIDE_STYLE('',(#279367)); +#279367 = SURFACE_STYLE_FILL_AREA(#279368); +#279368 = FILL_AREA_STYLE('',(#279369)); +#279369 = FILL_AREA_STYLE_COLOUR('',#278634); +#279370 = OVER_RIDING_STYLED_ITEM('overriding color',(#279371),#70161, + #278616); +#279371 = PRESENTATION_STYLE_ASSIGNMENT((#279372)); +#279372 = SURFACE_STYLE_USAGE(.BOTH.,#279373); +#279373 = SURFACE_SIDE_STYLE('',(#279374)); +#279374 = SURFACE_STYLE_FILL_AREA(#279375); +#279375 = FILL_AREA_STYLE('',(#279376)); +#279376 = FILL_AREA_STYLE_COLOUR('',#278634); +#279377 = OVER_RIDING_STYLED_ITEM('overriding color',(#279378),#70178, + #278616); +#279378 = PRESENTATION_STYLE_ASSIGNMENT((#279379)); +#279379 = SURFACE_STYLE_USAGE(.BOTH.,#279380); +#279380 = SURFACE_SIDE_STYLE('',(#279381)); +#279381 = SURFACE_STYLE_FILL_AREA(#279382); +#279382 = FILL_AREA_STYLE('',(#279383)); +#279383 = FILL_AREA_STYLE_COLOUR('',#278634); +#279384 = OVER_RIDING_STYLED_ITEM('overriding color',(#279385),#70209, + #278616); +#279385 = PRESENTATION_STYLE_ASSIGNMENT((#279386)); +#279386 = SURFACE_STYLE_USAGE(.BOTH.,#279387); +#279387 = SURFACE_SIDE_STYLE('',(#279388)); +#279388 = SURFACE_STYLE_FILL_AREA(#279389); +#279389 = FILL_AREA_STYLE('',(#279390)); +#279390 = FILL_AREA_STYLE_COLOUR('',#278634); +#279391 = OVER_RIDING_STYLED_ITEM('overriding color',(#279392),#70226, + #278616); +#279392 = PRESENTATION_STYLE_ASSIGNMENT((#279393)); +#279393 = SURFACE_STYLE_USAGE(.BOTH.,#279394); +#279394 = SURFACE_SIDE_STYLE('',(#279395)); +#279395 = SURFACE_STYLE_FILL_AREA(#279396); +#279396 = FILL_AREA_STYLE('',(#279397)); +#279397 = FILL_AREA_STYLE_COLOUR('',#278634); +#279398 = OVER_RIDING_STYLED_ITEM('overriding color',(#279399),#70248, + #278616); +#279399 = PRESENTATION_STYLE_ASSIGNMENT((#279400)); +#279400 = SURFACE_STYLE_USAGE(.BOTH.,#279401); +#279401 = SURFACE_SIDE_STYLE('',(#279402)); +#279402 = SURFACE_STYLE_FILL_AREA(#279403); +#279403 = FILL_AREA_STYLE('',(#279404)); +#279404 = FILL_AREA_STYLE_COLOUR('',#278634); +#279405 = OVER_RIDING_STYLED_ITEM('overriding color',(#279406),#70260, + #278616); +#279406 = PRESENTATION_STYLE_ASSIGNMENT((#279407)); +#279407 = SURFACE_STYLE_USAGE(.BOTH.,#279408); +#279408 = SURFACE_SIDE_STYLE('',(#279409)); +#279409 = SURFACE_STYLE_FILL_AREA(#279410); +#279410 = FILL_AREA_STYLE('',(#279411)); +#279411 = FILL_AREA_STYLE_COLOUR('',#278634); +#279412 = OVER_RIDING_STYLED_ITEM('overriding color',(#279413),#70272, + #278616); +#279413 = PRESENTATION_STYLE_ASSIGNMENT((#279414)); +#279414 = SURFACE_STYLE_USAGE(.BOTH.,#279415); +#279415 = SURFACE_SIDE_STYLE('',(#279416)); +#279416 = SURFACE_STYLE_FILL_AREA(#279417); +#279417 = FILL_AREA_STYLE('',(#279418)); +#279418 = FILL_AREA_STYLE_COLOUR('',#278634); +#279419 = OVER_RIDING_STYLED_ITEM('overriding color',(#279420),#70303, + #278616); +#279420 = PRESENTATION_STYLE_ASSIGNMENT((#279421)); +#279421 = SURFACE_STYLE_USAGE(.BOTH.,#279422); +#279422 = SURFACE_SIDE_STYLE('',(#279423)); +#279423 = SURFACE_STYLE_FILL_AREA(#279424); +#279424 = FILL_AREA_STYLE('',(#279425)); +#279425 = FILL_AREA_STYLE_COLOUR('',#278634); +#279426 = OVER_RIDING_STYLED_ITEM('overriding color',(#279427),#70315, + #278616); +#279427 = PRESENTATION_STYLE_ASSIGNMENT((#279428)); +#279428 = SURFACE_STYLE_USAGE(.BOTH.,#279429); +#279429 = SURFACE_SIDE_STYLE('',(#279430)); +#279430 = SURFACE_STYLE_FILL_AREA(#279431); +#279431 = FILL_AREA_STYLE('',(#279432)); +#279432 = FILL_AREA_STYLE_COLOUR('',#278634); +#279433 = OVER_RIDING_STYLED_ITEM('overriding color',(#279434),#70327, + #278616); +#279434 = PRESENTATION_STYLE_ASSIGNMENT((#279435)); +#279435 = SURFACE_STYLE_USAGE(.BOTH.,#279436); +#279436 = SURFACE_SIDE_STYLE('',(#279437)); +#279437 = SURFACE_STYLE_FILL_AREA(#279438); +#279438 = FILL_AREA_STYLE('',(#279439)); +#279439 = FILL_AREA_STYLE_COLOUR('',#278634); +#279440 = OVER_RIDING_STYLED_ITEM('overriding color',(#279441),#70358, + #278616); +#279441 = PRESENTATION_STYLE_ASSIGNMENT((#279442)); +#279442 = SURFACE_STYLE_USAGE(.BOTH.,#279443); +#279443 = SURFACE_SIDE_STYLE('',(#279444)); +#279444 = SURFACE_STYLE_FILL_AREA(#279445); +#279445 = FILL_AREA_STYLE('',(#279446)); +#279446 = FILL_AREA_STYLE_COLOUR('',#278634); +#279447 = OVER_RIDING_STYLED_ITEM('overriding color',(#279448),#70367, + #278616); +#279448 = PRESENTATION_STYLE_ASSIGNMENT((#279449)); +#279449 = SURFACE_STYLE_USAGE(.BOTH.,#279450); +#279450 = SURFACE_SIDE_STYLE('',(#279451)); +#279451 = SURFACE_STYLE_FILL_AREA(#279452); +#279452 = FILL_AREA_STYLE('',(#279453)); +#279453 = FILL_AREA_STYLE_COLOUR('',#278634); +#279454 = OVER_RIDING_STYLED_ITEM('overriding color',(#279455),#70376, + #278616); +#279455 = PRESENTATION_STYLE_ASSIGNMENT((#279456)); +#279456 = SURFACE_STYLE_USAGE(.BOTH.,#279457); +#279457 = SURFACE_SIDE_STYLE('',(#279458)); +#279458 = SURFACE_STYLE_FILL_AREA(#279459); +#279459 = FILL_AREA_STYLE('',(#279460)); +#279460 = FILL_AREA_STYLE_COLOUR('',#278634); +#279461 = OVER_RIDING_STYLED_ITEM('overriding color',(#279462),#70393, + #278616); +#279462 = PRESENTATION_STYLE_ASSIGNMENT((#279463)); +#279463 = SURFACE_STYLE_USAGE(.BOTH.,#279464); +#279464 = SURFACE_SIDE_STYLE('',(#279465)); +#279465 = SURFACE_STYLE_FILL_AREA(#279466); +#279466 = FILL_AREA_STYLE('',(#279467)); +#279467 = FILL_AREA_STYLE_COLOUR('',#278634); +#279468 = OVER_RIDING_STYLED_ITEM('overriding color',(#279469),#70410, + #278616); +#279469 = PRESENTATION_STYLE_ASSIGNMENT((#279470)); +#279470 = SURFACE_STYLE_USAGE(.BOTH.,#279471); +#279471 = SURFACE_SIDE_STYLE('',(#279472)); +#279472 = SURFACE_STYLE_FILL_AREA(#279473); +#279473 = FILL_AREA_STYLE('',(#279474)); +#279474 = FILL_AREA_STYLE_COLOUR('',#278634); +#279475 = OVER_RIDING_STYLED_ITEM('overriding color',(#279476),#70443, + #278616); +#279476 = PRESENTATION_STYLE_ASSIGNMENT((#279477)); +#279477 = SURFACE_STYLE_USAGE(.BOTH.,#279478); +#279478 = SURFACE_SIDE_STYLE('',(#279479)); +#279479 = SURFACE_STYLE_FILL_AREA(#279480); +#279480 = FILL_AREA_STYLE('',(#279481)); +#279481 = FILL_AREA_STYLE_COLOUR('',#278634); +#279482 = OVER_RIDING_STYLED_ITEM('overriding color',(#279483),#70460, + #278616); +#279483 = PRESENTATION_STYLE_ASSIGNMENT((#279484)); +#279484 = SURFACE_STYLE_USAGE(.BOTH.,#279485); +#279485 = SURFACE_SIDE_STYLE('',(#279486)); +#279486 = SURFACE_STYLE_FILL_AREA(#279487); +#279487 = FILL_AREA_STYLE('',(#279488)); +#279488 = FILL_AREA_STYLE_COLOUR('',#278634); +#279489 = OVER_RIDING_STYLED_ITEM('overriding color',(#279490),#70477, + #278616); +#279490 = PRESENTATION_STYLE_ASSIGNMENT((#279491)); +#279491 = SURFACE_STYLE_USAGE(.BOTH.,#279492); +#279492 = SURFACE_SIDE_STYLE('',(#279493)); +#279493 = SURFACE_STYLE_FILL_AREA(#279494); +#279494 = FILL_AREA_STYLE('',(#279495)); +#279495 = FILL_AREA_STYLE_COLOUR('',#278634); +#279496 = OVER_RIDING_STYLED_ITEM('overriding color',(#279497),#70510, + #278616); +#279497 = PRESENTATION_STYLE_ASSIGNMENT((#279498)); +#279498 = SURFACE_STYLE_USAGE(.BOTH.,#279499); +#279499 = SURFACE_SIDE_STYLE('',(#279500)); +#279500 = SURFACE_STYLE_FILL_AREA(#279501); +#279501 = FILL_AREA_STYLE('',(#279502)); +#279502 = FILL_AREA_STYLE_COLOUR('',#278634); +#279503 = OVER_RIDING_STYLED_ITEM('overriding color',(#279504),#70543, + #278616); +#279504 = PRESENTATION_STYLE_ASSIGNMENT((#279505)); +#279505 = SURFACE_STYLE_USAGE(.BOTH.,#279506); +#279506 = SURFACE_SIDE_STYLE('',(#279507)); +#279507 = SURFACE_STYLE_FILL_AREA(#279508); +#279508 = FILL_AREA_STYLE('',(#279509)); +#279509 = FILL_AREA_STYLE_COLOUR('',#278634); +#279510 = OVER_RIDING_STYLED_ITEM('overriding color',(#279511),#70576, + #278616); +#279511 = PRESENTATION_STYLE_ASSIGNMENT((#279512)); +#279512 = SURFACE_STYLE_USAGE(.BOTH.,#279513); +#279513 = SURFACE_SIDE_STYLE('',(#279514)); +#279514 = SURFACE_STYLE_FILL_AREA(#279515); +#279515 = FILL_AREA_STYLE('',(#279516)); +#279516 = FILL_AREA_STYLE_COLOUR('',#278634); +#279517 = OVER_RIDING_STYLED_ITEM('overriding color',(#279518),#70593, + #278616); +#279518 = PRESENTATION_STYLE_ASSIGNMENT((#279519)); +#279519 = SURFACE_STYLE_USAGE(.BOTH.,#279520); +#279520 = SURFACE_SIDE_STYLE('',(#279521)); +#279521 = SURFACE_STYLE_FILL_AREA(#279522); +#279522 = FILL_AREA_STYLE('',(#279523)); +#279523 = FILL_AREA_STYLE_COLOUR('',#278634); +#279524 = OVER_RIDING_STYLED_ITEM('overriding color',(#279525),#70610, + #278616); +#279525 = PRESENTATION_STYLE_ASSIGNMENT((#279526)); +#279526 = SURFACE_STYLE_USAGE(.BOTH.,#279527); +#279527 = SURFACE_SIDE_STYLE('',(#279528)); +#279528 = SURFACE_STYLE_FILL_AREA(#279529); +#279529 = FILL_AREA_STYLE('',(#279530)); +#279530 = FILL_AREA_STYLE_COLOUR('',#278634); +#279531 = OVER_RIDING_STYLED_ITEM('overriding color',(#279532),#70641, + #278616); +#279532 = PRESENTATION_STYLE_ASSIGNMENT((#279533)); +#279533 = SURFACE_STYLE_USAGE(.BOTH.,#279534); +#279534 = SURFACE_SIDE_STYLE('',(#279535)); +#279535 = SURFACE_STYLE_FILL_AREA(#279536); +#279536 = FILL_AREA_STYLE('',(#279537)); +#279537 = FILL_AREA_STYLE_COLOUR('',#278634); +#279538 = OVER_RIDING_STYLED_ITEM('overriding color',(#279539),#70658, + #278616); +#279539 = PRESENTATION_STYLE_ASSIGNMENT((#279540)); +#279540 = SURFACE_STYLE_USAGE(.BOTH.,#279541); +#279541 = SURFACE_SIDE_STYLE('',(#279542)); +#279542 = SURFACE_STYLE_FILL_AREA(#279543); +#279543 = FILL_AREA_STYLE('',(#279544)); +#279544 = FILL_AREA_STYLE_COLOUR('',#278634); +#279545 = OVER_RIDING_STYLED_ITEM('overriding color',(#279546),#70675, + #278616); +#279546 = PRESENTATION_STYLE_ASSIGNMENT((#279547)); +#279547 = SURFACE_STYLE_USAGE(.BOTH.,#279548); +#279548 = SURFACE_SIDE_STYLE('',(#279549)); +#279549 = SURFACE_STYLE_FILL_AREA(#279550); +#279550 = FILL_AREA_STYLE('',(#279551)); +#279551 = FILL_AREA_STYLE_COLOUR('',#278634); +#279552 = OVER_RIDING_STYLED_ITEM('overriding color',(#279553),#70706, + #278616); +#279553 = PRESENTATION_STYLE_ASSIGNMENT((#279554)); +#279554 = SURFACE_STYLE_USAGE(.BOTH.,#279555); +#279555 = SURFACE_SIDE_STYLE('',(#279556)); +#279556 = SURFACE_STYLE_FILL_AREA(#279557); +#279557 = FILL_AREA_STYLE('',(#279558)); +#279558 = FILL_AREA_STYLE_COLOUR('',#278634); +#279559 = OVER_RIDING_STYLED_ITEM('overriding color',(#279560),#70737, + #278616); +#279560 = PRESENTATION_STYLE_ASSIGNMENT((#279561)); +#279561 = SURFACE_STYLE_USAGE(.BOTH.,#279562); +#279562 = SURFACE_SIDE_STYLE('',(#279563)); +#279563 = SURFACE_STYLE_FILL_AREA(#279564); +#279564 = FILL_AREA_STYLE('',(#279565)); +#279565 = FILL_AREA_STYLE_COLOUR('',#278634); +#279566 = OVER_RIDING_STYLED_ITEM('overriding color',(#279567),#70768, + #278616); +#279567 = PRESENTATION_STYLE_ASSIGNMENT((#279568)); +#279568 = SURFACE_STYLE_USAGE(.BOTH.,#279569); +#279569 = SURFACE_SIDE_STYLE('',(#279570)); +#279570 = SURFACE_STYLE_FILL_AREA(#279571); +#279571 = FILL_AREA_STYLE('',(#279572)); +#279572 = FILL_AREA_STYLE_COLOUR('',#278634); +#279573 = OVER_RIDING_STYLED_ITEM('overriding color',(#279574),#70785, + #278616); +#279574 = PRESENTATION_STYLE_ASSIGNMENT((#279575)); +#279575 = SURFACE_STYLE_USAGE(.BOTH.,#279576); +#279576 = SURFACE_SIDE_STYLE('',(#279577)); +#279577 = SURFACE_STYLE_FILL_AREA(#279578); +#279578 = FILL_AREA_STYLE('',(#279579)); +#279579 = FILL_AREA_STYLE_COLOUR('',#278634); +#279580 = OVER_RIDING_STYLED_ITEM('overriding color',(#279581),#70802, + #278616); +#279581 = PRESENTATION_STYLE_ASSIGNMENT((#279582)); +#279582 = SURFACE_STYLE_USAGE(.BOTH.,#279583); +#279583 = SURFACE_SIDE_STYLE('',(#279584)); +#279584 = SURFACE_STYLE_FILL_AREA(#279585); +#279585 = FILL_AREA_STYLE('',(#279586)); +#279586 = FILL_AREA_STYLE_COLOUR('',#278634); +#279587 = OVER_RIDING_STYLED_ITEM('overriding color',(#279588),#70814, + #278616); +#279588 = PRESENTATION_STYLE_ASSIGNMENT((#279589)); +#279589 = SURFACE_STYLE_USAGE(.BOTH.,#279590); +#279590 = SURFACE_SIDE_STYLE('',(#279591)); +#279591 = SURFACE_STYLE_FILL_AREA(#279592); +#279592 = FILL_AREA_STYLE('',(#279593)); +#279593 = FILL_AREA_STYLE_COLOUR('',#278634); +#279594 = OVER_RIDING_STYLED_ITEM('overriding color',(#279595),#70831, + #278616); +#279595 = PRESENTATION_STYLE_ASSIGNMENT((#279596)); +#279596 = SURFACE_STYLE_USAGE(.BOTH.,#279597); +#279597 = SURFACE_SIDE_STYLE('',(#279598)); +#279598 = SURFACE_STYLE_FILL_AREA(#279599); +#279599 = FILL_AREA_STYLE('',(#279600)); +#279600 = FILL_AREA_STYLE_COLOUR('',#278634); +#279601 = OVER_RIDING_STYLED_ITEM('overriding color',(#279602),#70848, + #278616); +#279602 = PRESENTATION_STYLE_ASSIGNMENT((#279603)); +#279603 = SURFACE_STYLE_USAGE(.BOTH.,#279604); +#279604 = SURFACE_SIDE_STYLE('',(#279605)); +#279605 = SURFACE_STYLE_FILL_AREA(#279606); +#279606 = FILL_AREA_STYLE('',(#279607)); +#279607 = FILL_AREA_STYLE_COLOUR('',#278634); +#279608 = STYLED_ITEM('color',(#279609),#70860); +#279609 = PRESENTATION_STYLE_ASSIGNMENT((#279610,#279615)); +#279610 = SURFACE_STYLE_USAGE(.BOTH.,#279611); +#279611 = SURFACE_SIDE_STYLE('',(#279612)); +#279612 = SURFACE_STYLE_FILL_AREA(#279613); +#279613 = FILL_AREA_STYLE('',(#279614)); +#279614 = FILL_AREA_STYLE_COLOUR('',#278623); +#279615 = CURVE_STYLE('',#279616,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#279616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#279617 = OVER_RIDING_STYLED_ITEM('overriding color',(#279618),#70862, + #279608); +#279618 = PRESENTATION_STYLE_ASSIGNMENT((#279619)); +#279619 = SURFACE_STYLE_USAGE(.BOTH.,#279620); +#279620 = SURFACE_SIDE_STYLE('',(#279621)); +#279621 = SURFACE_STYLE_FILL_AREA(#279622); +#279622 = FILL_AREA_STYLE('',(#279623)); +#279623 = FILL_AREA_STYLE_COLOUR('',#279624); +#279624 = COLOUR_RGB('',0.147999998088,0.144999993226,0.144999993226); +#279625 = OVER_RIDING_STYLED_ITEM('overriding color',(#279626),#70950, + #279608); +#279626 = PRESENTATION_STYLE_ASSIGNMENT((#279627)); +#279627 = SURFACE_STYLE_USAGE(.BOTH.,#279628); +#279628 = SURFACE_SIDE_STYLE('',(#279629)); +#279629 = SURFACE_STYLE_FILL_AREA(#279630); +#279630 = FILL_AREA_STYLE('',(#279631)); +#279631 = FILL_AREA_STYLE_COLOUR('',#279624); +#279632 = OVER_RIDING_STYLED_ITEM('overriding color',(#279633),#71000, + #279608); +#279633 = PRESENTATION_STYLE_ASSIGNMENT((#279634)); +#279634 = SURFACE_STYLE_USAGE(.BOTH.,#279635); +#279635 = SURFACE_SIDE_STYLE('',(#279636)); +#279636 = SURFACE_STYLE_FILL_AREA(#279637); +#279637 = FILL_AREA_STYLE('',(#279638)); +#279638 = FILL_AREA_STYLE_COLOUR('',#279624); +#279639 = OVER_RIDING_STYLED_ITEM('overriding color',(#279640),#71143, + #279608); +#279640 = PRESENTATION_STYLE_ASSIGNMENT((#279641)); +#279641 = SURFACE_STYLE_USAGE(.BOTH.,#279642); +#279642 = SURFACE_SIDE_STYLE('',(#279643)); +#279643 = SURFACE_STYLE_FILL_AREA(#279644); +#279644 = FILL_AREA_STYLE('',(#279645)); +#279645 = FILL_AREA_STYLE_COLOUR('',#279624); +#279646 = OVER_RIDING_STYLED_ITEM('overriding color',(#279647),#71183, + #279608); +#279647 = PRESENTATION_STYLE_ASSIGNMENT((#279648)); +#279648 = SURFACE_STYLE_USAGE(.BOTH.,#279649); +#279649 = SURFACE_SIDE_STYLE('',(#279650)); +#279650 = SURFACE_STYLE_FILL_AREA(#279651); +#279651 = FILL_AREA_STYLE('',(#279652)); +#279652 = FILL_AREA_STYLE_COLOUR('',#279624); +#279653 = OVER_RIDING_STYLED_ITEM('overriding color',(#279654),#71222, + #279608); +#279654 = PRESENTATION_STYLE_ASSIGNMENT((#279655)); +#279655 = SURFACE_STYLE_USAGE(.BOTH.,#279656); +#279656 = SURFACE_SIDE_STYLE('',(#279657)); +#279657 = SURFACE_STYLE_FILL_AREA(#279658); +#279658 = FILL_AREA_STYLE('',(#279659)); +#279659 = FILL_AREA_STYLE_COLOUR('',#279624); +#279660 = OVER_RIDING_STYLED_ITEM('overriding color',(#279661),#71253, + #279608); +#279661 = PRESENTATION_STYLE_ASSIGNMENT((#279662)); +#279662 = SURFACE_STYLE_USAGE(.BOTH.,#279663); +#279663 = SURFACE_SIDE_STYLE('',(#279664)); +#279664 = SURFACE_STYLE_FILL_AREA(#279665); +#279665 = FILL_AREA_STYLE('',(#279666)); +#279666 = FILL_AREA_STYLE_COLOUR('',#279624); +#279667 = OVER_RIDING_STYLED_ITEM('overriding color',(#279668),#71290, + #279608); +#279668 = PRESENTATION_STYLE_ASSIGNMENT((#279669)); +#279669 = SURFACE_STYLE_USAGE(.BOTH.,#279670); +#279670 = SURFACE_SIDE_STYLE('',(#279671)); +#279671 = SURFACE_STYLE_FILL_AREA(#279672); +#279672 = FILL_AREA_STYLE('',(#279673)); +#279673 = FILL_AREA_STYLE_COLOUR('',#279624); +#279674 = OVER_RIDING_STYLED_ITEM('overriding color',(#279675),#71307, + #279608); +#279675 = PRESENTATION_STYLE_ASSIGNMENT((#279676)); +#279676 = SURFACE_STYLE_USAGE(.BOTH.,#279677); +#279677 = SURFACE_SIDE_STYLE('',(#279678)); +#279678 = SURFACE_STYLE_FILL_AREA(#279679); +#279679 = FILL_AREA_STYLE('',(#279680)); +#279680 = FILL_AREA_STYLE_COLOUR('',#279624); +#279681 = OVER_RIDING_STYLED_ITEM('overriding color',(#279682),#71339, + #279608); +#279682 = PRESENTATION_STYLE_ASSIGNMENT((#279683)); +#279683 = SURFACE_STYLE_USAGE(.BOTH.,#279684); +#279684 = SURFACE_SIDE_STYLE('',(#279685)); +#279685 = SURFACE_STYLE_FILL_AREA(#279686); +#279686 = FILL_AREA_STYLE('',(#279687)); +#279687 = FILL_AREA_STYLE_COLOUR('',#279624); +#279688 = OVER_RIDING_STYLED_ITEM('overriding color',(#279689),#71418, + #279608); +#279689 = PRESENTATION_STYLE_ASSIGNMENT((#279690)); +#279690 = SURFACE_STYLE_USAGE(.BOTH.,#279691); +#279691 = SURFACE_SIDE_STYLE('',(#279692)); +#279692 = SURFACE_STYLE_FILL_AREA(#279693); +#279693 = FILL_AREA_STYLE('',(#279694)); +#279694 = FILL_AREA_STYLE_COLOUR('',#279624); +#279695 = OVER_RIDING_STYLED_ITEM('overriding color',(#279696),#71449, + #279608); +#279696 = PRESENTATION_STYLE_ASSIGNMENT((#279697)); +#279697 = SURFACE_STYLE_USAGE(.BOTH.,#279698); +#279698 = SURFACE_SIDE_STYLE('',(#279699)); +#279699 = SURFACE_STYLE_FILL_AREA(#279700); +#279700 = FILL_AREA_STYLE('',(#279701)); +#279701 = FILL_AREA_STYLE_COLOUR('',#279624); +#279702 = OVER_RIDING_STYLED_ITEM('overriding color',(#279703),#71480, + #279608); +#279703 = PRESENTATION_STYLE_ASSIGNMENT((#279704)); +#279704 = SURFACE_STYLE_USAGE(.BOTH.,#279705); +#279705 = SURFACE_SIDE_STYLE('',(#279706)); +#279706 = SURFACE_STYLE_FILL_AREA(#279707); +#279707 = FILL_AREA_STYLE('',(#279708)); +#279708 = FILL_AREA_STYLE_COLOUR('',#279624); +#279709 = OVER_RIDING_STYLED_ITEM('overriding color',(#279710),#71617, + #279608); +#279710 = PRESENTATION_STYLE_ASSIGNMENT((#279711)); +#279711 = SURFACE_STYLE_USAGE(.BOTH.,#279712); +#279712 = SURFACE_SIDE_STYLE('',(#279713)); +#279713 = SURFACE_STYLE_FILL_AREA(#279714); +#279714 = FILL_AREA_STYLE('',(#279715)); +#279715 = FILL_AREA_STYLE_COLOUR('',#279624); +#279716 = OVER_RIDING_STYLED_ITEM('overriding color',(#279717),#71646, + #279608); +#279717 = PRESENTATION_STYLE_ASSIGNMENT((#279718)); +#279718 = SURFACE_STYLE_USAGE(.BOTH.,#279719); +#279719 = SURFACE_SIDE_STYLE('',(#279720)); +#279720 = SURFACE_STYLE_FILL_AREA(#279721); +#279721 = FILL_AREA_STYLE('',(#279722)); +#279722 = FILL_AREA_STYLE_COLOUR('',#279624); +#279723 = OVER_RIDING_STYLED_ITEM('overriding color',(#279724),#71671, + #279608); +#279724 = PRESENTATION_STYLE_ASSIGNMENT((#279725)); +#279725 = SURFACE_STYLE_USAGE(.BOTH.,#279726); +#279726 = SURFACE_SIDE_STYLE('',(#279727)); +#279727 = SURFACE_STYLE_FILL_AREA(#279728); +#279728 = FILL_AREA_STYLE('',(#279729)); +#279729 = FILL_AREA_STYLE_COLOUR('',#279624); +#279730 = OVER_RIDING_STYLED_ITEM('overriding color',(#279731),#71701, + #279608); +#279731 = PRESENTATION_STYLE_ASSIGNMENT((#279732)); +#279732 = SURFACE_STYLE_USAGE(.BOTH.,#279733); +#279733 = SURFACE_SIDE_STYLE('',(#279734)); +#279734 = SURFACE_STYLE_FILL_AREA(#279735); +#279735 = FILL_AREA_STYLE('',(#279736)); +#279736 = FILL_AREA_STYLE_COLOUR('',#279624); +#279737 = OVER_RIDING_STYLED_ITEM('overriding color',(#279738),#71732, + #279608); +#279738 = PRESENTATION_STYLE_ASSIGNMENT((#279739)); +#279739 = SURFACE_STYLE_USAGE(.BOTH.,#279740); +#279740 = SURFACE_SIDE_STYLE('',(#279741)); +#279741 = SURFACE_STYLE_FILL_AREA(#279742); +#279742 = FILL_AREA_STYLE('',(#279743)); +#279743 = FILL_AREA_STYLE_COLOUR('',#279624); +#279744 = OVER_RIDING_STYLED_ITEM('overriding color',(#279745),#71763, + #279608); +#279745 = PRESENTATION_STYLE_ASSIGNMENT((#279746)); +#279746 = SURFACE_STYLE_USAGE(.BOTH.,#279747); +#279747 = SURFACE_SIDE_STYLE('',(#279748)); +#279748 = SURFACE_STYLE_FILL_AREA(#279749); +#279749 = FILL_AREA_STYLE('',(#279750)); +#279750 = FILL_AREA_STYLE_COLOUR('',#279624); +#279751 = OVER_RIDING_STYLED_ITEM('overriding color',(#279752),#71796, + #279608); +#279752 = PRESENTATION_STYLE_ASSIGNMENT((#279753)); +#279753 = SURFACE_STYLE_USAGE(.BOTH.,#279754); +#279754 = SURFACE_SIDE_STYLE('',(#279755)); +#279755 = SURFACE_STYLE_FILL_AREA(#279756); +#279756 = FILL_AREA_STYLE('',(#279757)); +#279757 = FILL_AREA_STYLE_COLOUR('',#279624); +#279758 = OVER_RIDING_STYLED_ITEM('overriding color',(#279759),#71827, + #279608); +#279759 = PRESENTATION_STYLE_ASSIGNMENT((#279760)); +#279760 = SURFACE_STYLE_USAGE(.BOTH.,#279761); +#279761 = SURFACE_SIDE_STYLE('',(#279762)); +#279762 = SURFACE_STYLE_FILL_AREA(#279763); +#279763 = FILL_AREA_STYLE('',(#279764)); +#279764 = FILL_AREA_STYLE_COLOUR('',#279624); +#279765 = OVER_RIDING_STYLED_ITEM('overriding color',(#279766),#71843, + #279608); +#279766 = PRESENTATION_STYLE_ASSIGNMENT((#279767)); +#279767 = SURFACE_STYLE_USAGE(.BOTH.,#279768); +#279768 = SURFACE_SIDE_STYLE('',(#279769)); +#279769 = SURFACE_STYLE_FILL_AREA(#279770); +#279770 = FILL_AREA_STYLE('',(#279771)); +#279771 = FILL_AREA_STYLE_COLOUR('',#279624); +#279772 = OVER_RIDING_STYLED_ITEM('overriding color',(#279773),#71860, + #279608); +#279773 = PRESENTATION_STYLE_ASSIGNMENT((#279774)); +#279774 = SURFACE_STYLE_USAGE(.BOTH.,#279775); +#279775 = SURFACE_SIDE_STYLE('',(#279776)); +#279776 = SURFACE_STYLE_FILL_AREA(#279777); +#279777 = FILL_AREA_STYLE('',(#279778)); +#279778 = FILL_AREA_STYLE_COLOUR('',#279624); +#279779 = OVER_RIDING_STYLED_ITEM('overriding color',(#279780),#71892, + #279608); +#279780 = PRESENTATION_STYLE_ASSIGNMENT((#279781)); +#279781 = SURFACE_STYLE_USAGE(.BOTH.,#279782); +#279782 = SURFACE_SIDE_STYLE('',(#279783)); +#279783 = SURFACE_STYLE_FILL_AREA(#279784); +#279784 = FILL_AREA_STYLE('',(#279785)); +#279785 = FILL_AREA_STYLE_COLOUR('',#279624); +#279786 = OVER_RIDING_STYLED_ITEM('overriding color',(#279787),#71972, + #279608); +#279787 = PRESENTATION_STYLE_ASSIGNMENT((#279788)); +#279788 = SURFACE_STYLE_USAGE(.BOTH.,#279789); +#279789 = SURFACE_SIDE_STYLE('',(#279790)); +#279790 = SURFACE_STYLE_FILL_AREA(#279791); +#279791 = FILL_AREA_STYLE('',(#279792)); +#279792 = FILL_AREA_STYLE_COLOUR('',#279624); +#279793 = OVER_RIDING_STYLED_ITEM('overriding color',(#279794),#72003, + #279608); +#279794 = PRESENTATION_STYLE_ASSIGNMENT((#279795)); +#279795 = SURFACE_STYLE_USAGE(.BOTH.,#279796); +#279796 = SURFACE_SIDE_STYLE('',(#279797)); +#279797 = SURFACE_STYLE_FILL_AREA(#279798); +#279798 = FILL_AREA_STYLE('',(#279799)); +#279799 = FILL_AREA_STYLE_COLOUR('',#279624); +#279800 = OVER_RIDING_STYLED_ITEM('overriding color',(#279801),#72050, + #279608); +#279801 = PRESENTATION_STYLE_ASSIGNMENT((#279802)); +#279802 = SURFACE_STYLE_USAGE(.BOTH.,#279803); +#279803 = SURFACE_SIDE_STYLE('',(#279804)); +#279804 = SURFACE_STYLE_FILL_AREA(#279805); +#279805 = FILL_AREA_STYLE('',(#279806)); +#279806 = FILL_AREA_STYLE_COLOUR('',#279624); +#279807 = OVER_RIDING_STYLED_ITEM('overriding color',(#279808),#72081, + #279608); +#279808 = PRESENTATION_STYLE_ASSIGNMENT((#279809)); +#279809 = SURFACE_STYLE_USAGE(.BOTH.,#279810); +#279810 = SURFACE_SIDE_STYLE('',(#279811)); +#279811 = SURFACE_STYLE_FILL_AREA(#279812); +#279812 = FILL_AREA_STYLE('',(#279813)); +#279813 = FILL_AREA_STYLE_COLOUR('',#279624); +#279814 = OVER_RIDING_STYLED_ITEM('overriding color',(#279815),#72128, + #279608); +#279815 = PRESENTATION_STYLE_ASSIGNMENT((#279816)); +#279816 = SURFACE_STYLE_USAGE(.BOTH.,#279817); +#279817 = SURFACE_SIDE_STYLE('',(#279818)); +#279818 = SURFACE_STYLE_FILL_AREA(#279819); +#279819 = FILL_AREA_STYLE('',(#279820)); +#279820 = FILL_AREA_STYLE_COLOUR('',#279624); +#279821 = OVER_RIDING_STYLED_ITEM('overriding color',(#279822),#72159, + #279608); +#279822 = PRESENTATION_STYLE_ASSIGNMENT((#279823)); +#279823 = SURFACE_STYLE_USAGE(.BOTH.,#279824); +#279824 = SURFACE_SIDE_STYLE('',(#279825)); +#279825 = SURFACE_STYLE_FILL_AREA(#279826); +#279826 = FILL_AREA_STYLE('',(#279827)); +#279827 = FILL_AREA_STYLE_COLOUR('',#279624); +#279828 = OVER_RIDING_STYLED_ITEM('overriding color',(#279829),#72222, + #279608); +#279829 = PRESENTATION_STYLE_ASSIGNMENT((#279830)); +#279830 = SURFACE_STYLE_USAGE(.BOTH.,#279831); +#279831 = SURFACE_SIDE_STYLE('',(#279832)); +#279832 = SURFACE_STYLE_FILL_AREA(#279833); +#279833 = FILL_AREA_STYLE('',(#279834)); +#279834 = FILL_AREA_STYLE_COLOUR('',#279624); +#279835 = OVER_RIDING_STYLED_ITEM('overriding color',(#279836),#72253, + #279608); +#279836 = PRESENTATION_STYLE_ASSIGNMENT((#279837)); +#279837 = SURFACE_STYLE_USAGE(.BOTH.,#279838); +#279838 = SURFACE_SIDE_STYLE('',(#279839)); +#279839 = SURFACE_STYLE_FILL_AREA(#279840); +#279840 = FILL_AREA_STYLE('',(#279841)); +#279841 = FILL_AREA_STYLE_COLOUR('',#279624); +#279842 = OVER_RIDING_STYLED_ITEM('overriding color',(#279843),#72316, + #279608); +#279843 = PRESENTATION_STYLE_ASSIGNMENT((#279844)); +#279844 = SURFACE_STYLE_USAGE(.BOTH.,#279845); +#279845 = SURFACE_SIDE_STYLE('',(#279846)); +#279846 = SURFACE_STYLE_FILL_AREA(#279847); +#279847 = FILL_AREA_STYLE('',(#279848)); +#279848 = FILL_AREA_STYLE_COLOUR('',#279624); +#279849 = OVER_RIDING_STYLED_ITEM('overriding color',(#279850),#72347, + #279608); +#279850 = PRESENTATION_STYLE_ASSIGNMENT((#279851)); +#279851 = SURFACE_STYLE_USAGE(.BOTH.,#279852); +#279852 = SURFACE_SIDE_STYLE('',(#279853)); +#279853 = SURFACE_STYLE_FILL_AREA(#279854); +#279854 = FILL_AREA_STYLE('',(#279855)); +#279855 = FILL_AREA_STYLE_COLOUR('',#279624); +#279856 = OVER_RIDING_STYLED_ITEM('overriding color',(#279857),#72394, + #279608); +#279857 = PRESENTATION_STYLE_ASSIGNMENT((#279858)); +#279858 = SURFACE_STYLE_USAGE(.BOTH.,#279859); +#279859 = SURFACE_SIDE_STYLE('',(#279860)); +#279860 = SURFACE_STYLE_FILL_AREA(#279861); +#279861 = FILL_AREA_STYLE('',(#279862)); +#279862 = FILL_AREA_STYLE_COLOUR('',#279624); +#279863 = OVER_RIDING_STYLED_ITEM('overriding color',(#279864),#72425, + #279608); +#279864 = PRESENTATION_STYLE_ASSIGNMENT((#279865)); +#279865 = SURFACE_STYLE_USAGE(.BOTH.,#279866); +#279866 = SURFACE_SIDE_STYLE('',(#279867)); +#279867 = SURFACE_STYLE_FILL_AREA(#279868); +#279868 = FILL_AREA_STYLE('',(#279869)); +#279869 = FILL_AREA_STYLE_COLOUR('',#279624); +#279870 = OVER_RIDING_STYLED_ITEM('overriding color',(#279871),#72472, + #279608); +#279871 = PRESENTATION_STYLE_ASSIGNMENT((#279872)); +#279872 = SURFACE_STYLE_USAGE(.BOTH.,#279873); +#279873 = SURFACE_SIDE_STYLE('',(#279874)); +#279874 = SURFACE_STYLE_FILL_AREA(#279875); +#279875 = FILL_AREA_STYLE('',(#279876)); +#279876 = FILL_AREA_STYLE_COLOUR('',#279624); +#279877 = OVER_RIDING_STYLED_ITEM('overriding color',(#279878),#72503, + #279608); +#279878 = PRESENTATION_STYLE_ASSIGNMENT((#279879)); +#279879 = SURFACE_STYLE_USAGE(.BOTH.,#279880); +#279880 = SURFACE_SIDE_STYLE('',(#279881)); +#279881 = SURFACE_STYLE_FILL_AREA(#279882); +#279882 = FILL_AREA_STYLE('',(#279883)); +#279883 = FILL_AREA_STYLE_COLOUR('',#279624); +#279884 = OVER_RIDING_STYLED_ITEM('overriding color',(#279885),#72584, + #279608); +#279885 = PRESENTATION_STYLE_ASSIGNMENT((#279886)); +#279886 = SURFACE_STYLE_USAGE(.BOTH.,#279887); +#279887 = SURFACE_SIDE_STYLE('',(#279888)); +#279888 = SURFACE_STYLE_FILL_AREA(#279889); +#279889 = FILL_AREA_STYLE('',(#279890)); +#279890 = FILL_AREA_STYLE_COLOUR('',#279624); +#279891 = OVER_RIDING_STYLED_ITEM('overriding color',(#279892),#72606, + #279608); +#279892 = PRESENTATION_STYLE_ASSIGNMENT((#279893)); +#279893 = SURFACE_STYLE_USAGE(.BOTH.,#279894); +#279894 = SURFACE_SIDE_STYLE('',(#279895)); +#279895 = SURFACE_STYLE_FILL_AREA(#279896); +#279896 = FILL_AREA_STYLE('',(#279897)); +#279897 = FILL_AREA_STYLE_COLOUR('',#279624); +#279898 = OVER_RIDING_STYLED_ITEM('overriding color',(#279899),#72628, + #279608); +#279899 = PRESENTATION_STYLE_ASSIGNMENT((#279900)); +#279900 = SURFACE_STYLE_USAGE(.BOTH.,#279901); +#279901 = SURFACE_SIDE_STYLE('',(#279902)); +#279902 = SURFACE_STYLE_FILL_AREA(#279903); +#279903 = FILL_AREA_STYLE('',(#279904)); +#279904 = FILL_AREA_STYLE_COLOUR('',#279624); +#279905 = OVER_RIDING_STYLED_ITEM('overriding color',(#279906),#72640, + #279608); +#279906 = PRESENTATION_STYLE_ASSIGNMENT((#279907)); +#279907 = SURFACE_STYLE_USAGE(.BOTH.,#279908); +#279908 = SURFACE_SIDE_STYLE('',(#279909)); +#279909 = SURFACE_STYLE_FILL_AREA(#279910); +#279910 = FILL_AREA_STYLE('',(#279911)); +#279911 = FILL_AREA_STYLE_COLOUR('',#279624); +#279912 = OVER_RIDING_STYLED_ITEM('overriding color',(#279913),#72657, + #279608); +#279913 = PRESENTATION_STYLE_ASSIGNMENT((#279914)); +#279914 = SURFACE_STYLE_USAGE(.BOTH.,#279915); +#279915 = SURFACE_SIDE_STYLE('',(#279916)); +#279916 = SURFACE_STYLE_FILL_AREA(#279917); +#279917 = FILL_AREA_STYLE('',(#279918)); +#279918 = FILL_AREA_STYLE_COLOUR('',#279624); +#279919 = OVER_RIDING_STYLED_ITEM('overriding color',(#279920),#72674, + #279608); +#279920 = PRESENTATION_STYLE_ASSIGNMENT((#279921)); +#279921 = SURFACE_STYLE_USAGE(.BOTH.,#279922); +#279922 = SURFACE_SIDE_STYLE('',(#279923)); +#279923 = SURFACE_STYLE_FILL_AREA(#279924); +#279924 = FILL_AREA_STYLE('',(#279925)); +#279925 = FILL_AREA_STYLE_COLOUR('',#279624); +#279926 = OVER_RIDING_STYLED_ITEM('overriding color',(#279927),#72696, + #279608); +#279927 = PRESENTATION_STYLE_ASSIGNMENT((#279928)); +#279928 = SURFACE_STYLE_USAGE(.BOTH.,#279929); +#279929 = SURFACE_SIDE_STYLE('',(#279930)); +#279930 = SURFACE_STYLE_FILL_AREA(#279931); +#279931 = FILL_AREA_STYLE('',(#279932)); +#279932 = FILL_AREA_STYLE_COLOUR('',#279624); +#279933 = OVER_RIDING_STYLED_ITEM('overriding color',(#279934),#72708, + #279608); +#279934 = PRESENTATION_STYLE_ASSIGNMENT((#279935)); +#279935 = SURFACE_STYLE_USAGE(.BOTH.,#279936); +#279936 = SURFACE_SIDE_STYLE('',(#279937)); +#279937 = SURFACE_STYLE_FILL_AREA(#279938); +#279938 = FILL_AREA_STYLE('',(#279939)); +#279939 = FILL_AREA_STYLE_COLOUR('',#279624); +#279940 = OVER_RIDING_STYLED_ITEM('overriding color',(#279941),#72735, + #279608); +#279941 = PRESENTATION_STYLE_ASSIGNMENT((#279942)); +#279942 = SURFACE_STYLE_USAGE(.BOTH.,#279943); +#279943 = SURFACE_SIDE_STYLE('',(#279944)); +#279944 = SURFACE_STYLE_FILL_AREA(#279945); +#279945 = FILL_AREA_STYLE('',(#279946)); +#279946 = FILL_AREA_STYLE_COLOUR('',#279624); +#279947 = OVER_RIDING_STYLED_ITEM('overriding color',(#279948),#72752, + #279608); +#279948 = PRESENTATION_STYLE_ASSIGNMENT((#279949)); +#279949 = SURFACE_STYLE_USAGE(.BOTH.,#279950); +#279950 = SURFACE_SIDE_STYLE('',(#279951)); +#279951 = SURFACE_STYLE_FILL_AREA(#279952); +#279952 = FILL_AREA_STYLE('',(#279953)); +#279953 = FILL_AREA_STYLE_COLOUR('',#279624); +#279954 = OVER_RIDING_STYLED_ITEM('overriding color',(#279955),#72769, + #279608); +#279955 = PRESENTATION_STYLE_ASSIGNMENT((#279956)); +#279956 = SURFACE_STYLE_USAGE(.BOTH.,#279957); +#279957 = SURFACE_SIDE_STYLE('',(#279958)); +#279958 = SURFACE_STYLE_FILL_AREA(#279959); +#279959 = FILL_AREA_STYLE('',(#279960)); +#279960 = FILL_AREA_STYLE_COLOUR('',#279624); +#279961 = OVER_RIDING_STYLED_ITEM('overriding color',(#279962),#72786, + #279608); +#279962 = PRESENTATION_STYLE_ASSIGNMENT((#279963)); +#279963 = SURFACE_STYLE_USAGE(.BOTH.,#279964); +#279964 = SURFACE_SIDE_STYLE('',(#279965)); +#279965 = SURFACE_STYLE_FILL_AREA(#279966); +#279966 = FILL_AREA_STYLE('',(#279967)); +#279967 = FILL_AREA_STYLE_COLOUR('',#279624); +#279968 = OVER_RIDING_STYLED_ITEM('overriding color',(#279969),#72808, + #279608); +#279969 = PRESENTATION_STYLE_ASSIGNMENT((#279970)); +#279970 = SURFACE_STYLE_USAGE(.BOTH.,#279971); +#279971 = SURFACE_SIDE_STYLE('',(#279972)); +#279972 = SURFACE_STYLE_FILL_AREA(#279973); +#279973 = FILL_AREA_STYLE('',(#279974)); +#279974 = FILL_AREA_STYLE_COLOUR('',#279624); +#279975 = OVER_RIDING_STYLED_ITEM('overriding color',(#279976),#72829, + #279608); +#279976 = PRESENTATION_STYLE_ASSIGNMENT((#279977)); +#279977 = SURFACE_STYLE_USAGE(.BOTH.,#279978); +#279978 = SURFACE_SIDE_STYLE('',(#279979)); +#279979 = SURFACE_STYLE_FILL_AREA(#279980); +#279980 = FILL_AREA_STYLE('',(#279981)); +#279981 = FILL_AREA_STYLE_COLOUR('',#279624); +#279982 = OVER_RIDING_STYLED_ITEM('overriding color',(#279983),#72846, + #279608); +#279983 = PRESENTATION_STYLE_ASSIGNMENT((#279984)); +#279984 = SURFACE_STYLE_USAGE(.BOTH.,#279985); +#279985 = SURFACE_SIDE_STYLE('',(#279986)); +#279986 = SURFACE_STYLE_FILL_AREA(#279987); +#279987 = FILL_AREA_STYLE('',(#279988)); +#279988 = FILL_AREA_STYLE_COLOUR('',#279624); +#279989 = OVER_RIDING_STYLED_ITEM('overriding color',(#279990),#72863, + #279608); +#279990 = PRESENTATION_STYLE_ASSIGNMENT((#279991)); +#279991 = SURFACE_STYLE_USAGE(.BOTH.,#279992); +#279992 = SURFACE_SIDE_STYLE('',(#279993)); +#279993 = SURFACE_STYLE_FILL_AREA(#279994); +#279994 = FILL_AREA_STYLE('',(#279995)); +#279995 = FILL_AREA_STYLE_COLOUR('',#279624); +#279996 = OVER_RIDING_STYLED_ITEM('overriding color',(#279997),#72880, + #279608); +#279997 = PRESENTATION_STYLE_ASSIGNMENT((#279998)); +#279998 = SURFACE_STYLE_USAGE(.BOTH.,#279999); +#279999 = SURFACE_SIDE_STYLE('',(#280000)); +#280000 = SURFACE_STYLE_FILL_AREA(#280001); +#280001 = FILL_AREA_STYLE('',(#280002)); +#280002 = FILL_AREA_STYLE_COLOUR('',#279624); +#280003 = OVER_RIDING_STYLED_ITEM('overriding color',(#280004),#72901, + #279608); +#280004 = PRESENTATION_STYLE_ASSIGNMENT((#280005)); +#280005 = SURFACE_STYLE_USAGE(.BOTH.,#280006); +#280006 = SURFACE_SIDE_STYLE('',(#280007)); +#280007 = SURFACE_STYLE_FILL_AREA(#280008); +#280008 = FILL_AREA_STYLE('',(#280009)); +#280009 = FILL_AREA_STYLE_COLOUR('',#279624); +#280010 = OVER_RIDING_STYLED_ITEM('overriding color',(#280011),#72918, + #279608); +#280011 = PRESENTATION_STYLE_ASSIGNMENT((#280012)); +#280012 = SURFACE_STYLE_USAGE(.BOTH.,#280013); +#280013 = SURFACE_SIDE_STYLE('',(#280014)); +#280014 = SURFACE_STYLE_FILL_AREA(#280015); +#280015 = FILL_AREA_STYLE('',(#280016)); +#280016 = FILL_AREA_STYLE_COLOUR('',#279624); +#280017 = OVER_RIDING_STYLED_ITEM('overriding color',(#280018),#72930, + #279608); +#280018 = PRESENTATION_STYLE_ASSIGNMENT((#280019)); +#280019 = SURFACE_STYLE_USAGE(.BOTH.,#280020); +#280020 = SURFACE_SIDE_STYLE('',(#280021)); +#280021 = SURFACE_STYLE_FILL_AREA(#280022); +#280022 = FILL_AREA_STYLE('',(#280023)); +#280023 = FILL_AREA_STYLE_COLOUR('',#279624); +#280024 = OVER_RIDING_STYLED_ITEM('overriding color',(#280025),#72948, + #279608); +#280025 = PRESENTATION_STYLE_ASSIGNMENT((#280026)); +#280026 = SURFACE_STYLE_USAGE(.BOTH.,#280027); +#280027 = SURFACE_SIDE_STYLE('',(#280028)); +#280028 = SURFACE_STYLE_FILL_AREA(#280029); +#280029 = FILL_AREA_STYLE('',(#280030)); +#280030 = FILL_AREA_STYLE_COLOUR('',#279624); +#280031 = OVER_RIDING_STYLED_ITEM('overriding color',(#280032),#72971, + #279608); +#280032 = PRESENTATION_STYLE_ASSIGNMENT((#280033)); +#280033 = SURFACE_STYLE_USAGE(.BOTH.,#280034); +#280034 = SURFACE_SIDE_STYLE('',(#280035)); +#280035 = SURFACE_STYLE_FILL_AREA(#280036); +#280036 = FILL_AREA_STYLE('',(#280037)); +#280037 = FILL_AREA_STYLE_COLOUR('',#279624); +#280038 = OVER_RIDING_STYLED_ITEM('overriding color',(#280039),#72989, + #279608); +#280039 = PRESENTATION_STYLE_ASSIGNMENT((#280040)); +#280040 = SURFACE_STYLE_USAGE(.BOTH.,#280041); +#280041 = SURFACE_SIDE_STYLE('',(#280042)); +#280042 = SURFACE_STYLE_FILL_AREA(#280043); +#280043 = FILL_AREA_STYLE('',(#280044)); +#280044 = FILL_AREA_STYLE_COLOUR('',#279624); +#280045 = OVER_RIDING_STYLED_ITEM('overriding color',(#280046),#73005, + #279608); +#280046 = PRESENTATION_STYLE_ASSIGNMENT((#280047)); +#280047 = SURFACE_STYLE_USAGE(.BOTH.,#280048); +#280048 = SURFACE_SIDE_STYLE('',(#280049)); +#280049 = SURFACE_STYLE_FILL_AREA(#280050); +#280050 = FILL_AREA_STYLE('',(#280051)); +#280051 = FILL_AREA_STYLE_COLOUR('',#279624); +#280052 = OVER_RIDING_STYLED_ITEM('overriding color',(#280053),#73025, + #279608); +#280053 = PRESENTATION_STYLE_ASSIGNMENT((#280054)); +#280054 = SURFACE_STYLE_USAGE(.BOTH.,#280055); +#280055 = SURFACE_SIDE_STYLE('',(#280056)); +#280056 = SURFACE_STYLE_FILL_AREA(#280057); +#280057 = FILL_AREA_STYLE('',(#280058)); +#280058 = FILL_AREA_STYLE_COLOUR('',#279624); +#280059 = OVER_RIDING_STYLED_ITEM('overriding color',(#280060),#73056, + #279608); +#280060 = PRESENTATION_STYLE_ASSIGNMENT((#280061)); +#280061 = SURFACE_STYLE_USAGE(.BOTH.,#280062); +#280062 = SURFACE_SIDE_STYLE('',(#280063)); +#280063 = SURFACE_STYLE_FILL_AREA(#280064); +#280064 = FILL_AREA_STYLE('',(#280065)); +#280065 = FILL_AREA_STYLE_COLOUR('',#279624); +#280066 = OVER_RIDING_STYLED_ITEM('overriding color',(#280067),#73087, + #279608); +#280067 = PRESENTATION_STYLE_ASSIGNMENT((#280068)); +#280068 = SURFACE_STYLE_USAGE(.BOTH.,#280069); +#280069 = SURFACE_SIDE_STYLE('',(#280070)); +#280070 = SURFACE_STYLE_FILL_AREA(#280071); +#280071 = FILL_AREA_STYLE('',(#280072)); +#280072 = FILL_AREA_STYLE_COLOUR('',#279624); +#280073 = OVER_RIDING_STYLED_ITEM('overriding color',(#280074),#73111, + #279608); +#280074 = PRESENTATION_STYLE_ASSIGNMENT((#280075)); +#280075 = SURFACE_STYLE_USAGE(.BOTH.,#280076); +#280076 = SURFACE_SIDE_STYLE('',(#280077)); +#280077 = SURFACE_STYLE_FILL_AREA(#280078); +#280078 = FILL_AREA_STYLE('',(#280079)); +#280079 = FILL_AREA_STYLE_COLOUR('',#279624); +#280080 = OVER_RIDING_STYLED_ITEM('overriding color',(#280081),#73128, + #279608); +#280081 = PRESENTATION_STYLE_ASSIGNMENT((#280082)); +#280082 = SURFACE_STYLE_USAGE(.BOTH.,#280083); +#280083 = SURFACE_SIDE_STYLE('',(#280084)); +#280084 = SURFACE_STYLE_FILL_AREA(#280085); +#280085 = FILL_AREA_STYLE('',(#280086)); +#280086 = FILL_AREA_STYLE_COLOUR('',#279624); +#280087 = OVER_RIDING_STYLED_ITEM('overriding color',(#280088),#73146, + #279608); +#280088 = PRESENTATION_STYLE_ASSIGNMENT((#280089)); +#280089 = SURFACE_STYLE_USAGE(.BOTH.,#280090); +#280090 = SURFACE_SIDE_STYLE('',(#280091)); +#280091 = SURFACE_STYLE_FILL_AREA(#280092); +#280092 = FILL_AREA_STYLE('',(#280093)); +#280093 = FILL_AREA_STYLE_COLOUR('',#279624); +#280094 = OVER_RIDING_STYLED_ITEM('overriding color',(#280095),#73193, + #279608); +#280095 = PRESENTATION_STYLE_ASSIGNMENT((#280096)); +#280096 = SURFACE_STYLE_USAGE(.BOTH.,#280097); +#280097 = SURFACE_SIDE_STYLE('',(#280098)); +#280098 = SURFACE_STYLE_FILL_AREA(#280099); +#280099 = FILL_AREA_STYLE('',(#280100)); +#280100 = FILL_AREA_STYLE_COLOUR('',#279624); +#280101 = OVER_RIDING_STYLED_ITEM('overriding color',(#280102),#73224, + #279608); +#280102 = PRESENTATION_STYLE_ASSIGNMENT((#280103)); +#280103 = SURFACE_STYLE_USAGE(.BOTH.,#280104); +#280104 = SURFACE_SIDE_STYLE('',(#280105)); +#280105 = SURFACE_STYLE_FILL_AREA(#280106); +#280106 = FILL_AREA_STYLE('',(#280107)); +#280107 = FILL_AREA_STYLE_COLOUR('',#279624); +#280108 = OVER_RIDING_STYLED_ITEM('overriding color',(#280109),#73248, + #279608); +#280109 = PRESENTATION_STYLE_ASSIGNMENT((#280110)); +#280110 = SURFACE_STYLE_USAGE(.BOTH.,#280111); +#280111 = SURFACE_SIDE_STYLE('',(#280112)); +#280112 = SURFACE_STYLE_FILL_AREA(#280113); +#280113 = FILL_AREA_STYLE('',(#280114)); +#280114 = FILL_AREA_STYLE_COLOUR('',#279624); +#280115 = OVER_RIDING_STYLED_ITEM('overriding color',(#280116),#73272, + #279608); +#280116 = PRESENTATION_STYLE_ASSIGNMENT((#280117)); +#280117 = SURFACE_STYLE_USAGE(.BOTH.,#280118); +#280118 = SURFACE_SIDE_STYLE('',(#280119)); +#280119 = SURFACE_STYLE_FILL_AREA(#280120); +#280120 = FILL_AREA_STYLE('',(#280121)); +#280121 = FILL_AREA_STYLE_COLOUR('',#279624); +#280122 = OVER_RIDING_STYLED_ITEM('overriding color',(#280123),#73289, + #279608); +#280123 = PRESENTATION_STYLE_ASSIGNMENT((#280124)); +#280124 = SURFACE_STYLE_USAGE(.BOTH.,#280125); +#280125 = SURFACE_SIDE_STYLE('',(#280126)); +#280126 = SURFACE_STYLE_FILL_AREA(#280127); +#280127 = FILL_AREA_STYLE('',(#280128)); +#280128 = FILL_AREA_STYLE_COLOUR('',#279624); +#280129 = OVER_RIDING_STYLED_ITEM('overriding color',(#280130),#73301, + #279608); +#280130 = PRESENTATION_STYLE_ASSIGNMENT((#280131)); +#280131 = SURFACE_STYLE_USAGE(.BOTH.,#280132); +#280132 = SURFACE_SIDE_STYLE('',(#280133)); +#280133 = SURFACE_STYLE_FILL_AREA(#280134); +#280134 = FILL_AREA_STYLE('',(#280135)); +#280135 = FILL_AREA_STYLE_COLOUR('',#279624); +#280136 = OVER_RIDING_STYLED_ITEM('overriding color',(#280137),#73325, + #279608); +#280137 = PRESENTATION_STYLE_ASSIGNMENT((#280138)); +#280138 = SURFACE_STYLE_USAGE(.BOTH.,#280139); +#280139 = SURFACE_SIDE_STYLE('',(#280140)); +#280140 = SURFACE_STYLE_FILL_AREA(#280141); +#280141 = FILL_AREA_STYLE('',(#280142)); +#280142 = FILL_AREA_STYLE_COLOUR('',#279624); +#280143 = OVER_RIDING_STYLED_ITEM('overriding color',(#280144),#73364, + #279608); +#280144 = PRESENTATION_STYLE_ASSIGNMENT((#280145)); +#280145 = SURFACE_STYLE_USAGE(.BOTH.,#280146); +#280146 = SURFACE_SIDE_STYLE('',(#280147)); +#280147 = SURFACE_STYLE_FILL_AREA(#280148); +#280148 = FILL_AREA_STYLE('',(#280149)); +#280149 = FILL_AREA_STYLE_COLOUR('',#279624); +#280150 = OVER_RIDING_STYLED_ITEM('overriding color',(#280151),#73395, + #279608); +#280151 = PRESENTATION_STYLE_ASSIGNMENT((#280152)); +#280152 = SURFACE_STYLE_USAGE(.BOTH.,#280153); +#280153 = SURFACE_SIDE_STYLE('',(#280154)); +#280154 = SURFACE_STYLE_FILL_AREA(#280155); +#280155 = FILL_AREA_STYLE('',(#280156)); +#280156 = FILL_AREA_STYLE_COLOUR('',#279624); +#280157 = OVER_RIDING_STYLED_ITEM('overriding color',(#280158),#73432, + #279608); +#280158 = PRESENTATION_STYLE_ASSIGNMENT((#280159)); +#280159 = SURFACE_STYLE_USAGE(.BOTH.,#280160); +#280160 = SURFACE_SIDE_STYLE('',(#280161)); +#280161 = SURFACE_STYLE_FILL_AREA(#280162); +#280162 = FILL_AREA_STYLE('',(#280163)); +#280163 = FILL_AREA_STYLE_COLOUR('',#279624); +#280164 = OVER_RIDING_STYLED_ITEM('overriding color',(#280165),#73449, + #279608); +#280165 = PRESENTATION_STYLE_ASSIGNMENT((#280166)); +#280166 = SURFACE_STYLE_USAGE(.BOTH.,#280167); +#280167 = SURFACE_SIDE_STYLE('',(#280168)); +#280168 = SURFACE_STYLE_FILL_AREA(#280169); +#280169 = FILL_AREA_STYLE('',(#280170)); +#280170 = FILL_AREA_STYLE_COLOUR('',#279624); +#280171 = OVER_RIDING_STYLED_ITEM('overriding color',(#280172),#73461, + #279608); +#280172 = PRESENTATION_STYLE_ASSIGNMENT((#280173)); +#280173 = SURFACE_STYLE_USAGE(.BOTH.,#280174); +#280174 = SURFACE_SIDE_STYLE('',(#280175)); +#280175 = SURFACE_STYLE_FILL_AREA(#280176); +#280176 = FILL_AREA_STYLE('',(#280177)); +#280177 = FILL_AREA_STYLE_COLOUR('',#279624); +#280178 = OVER_RIDING_STYLED_ITEM('overriding color',(#280179),#73485, + #279608); +#280179 = PRESENTATION_STYLE_ASSIGNMENT((#280180)); +#280180 = SURFACE_STYLE_USAGE(.BOTH.,#280181); +#280181 = SURFACE_SIDE_STYLE('',(#280182)); +#280182 = SURFACE_STYLE_FILL_AREA(#280183); +#280183 = FILL_AREA_STYLE('',(#280184)); +#280184 = FILL_AREA_STYLE_COLOUR('',#279624); +#280185 = OVER_RIDING_STYLED_ITEM('overriding color',(#280186),#73524, + #279608); +#280186 = PRESENTATION_STYLE_ASSIGNMENT((#280187)); +#280187 = SURFACE_STYLE_USAGE(.BOTH.,#280188); +#280188 = SURFACE_SIDE_STYLE('',(#280189)); +#280189 = SURFACE_STYLE_FILL_AREA(#280190); +#280190 = FILL_AREA_STYLE('',(#280191)); +#280191 = FILL_AREA_STYLE_COLOUR('',#279624); +#280192 = OVER_RIDING_STYLED_ITEM('overriding color',(#280193),#73555, + #279608); +#280193 = PRESENTATION_STYLE_ASSIGNMENT((#280194)); +#280194 = SURFACE_STYLE_USAGE(.BOTH.,#280195); +#280195 = SURFACE_SIDE_STYLE('',(#280196)); +#280196 = SURFACE_STYLE_FILL_AREA(#280197); +#280197 = FILL_AREA_STYLE('',(#280198)); +#280198 = FILL_AREA_STYLE_COLOUR('',#279624); +#280199 = OVER_RIDING_STYLED_ITEM('overriding color',(#280200),#73602, + #279608); +#280200 = PRESENTATION_STYLE_ASSIGNMENT((#280201)); +#280201 = SURFACE_STYLE_USAGE(.BOTH.,#280202); +#280202 = SURFACE_SIDE_STYLE('',(#280203)); +#280203 = SURFACE_STYLE_FILL_AREA(#280204); +#280204 = FILL_AREA_STYLE('',(#280205)); +#280205 = FILL_AREA_STYLE_COLOUR('',#279624); +#280206 = OVER_RIDING_STYLED_ITEM('overriding color',(#280207),#73641, + #279608); +#280207 = PRESENTATION_STYLE_ASSIGNMENT((#280208)); +#280208 = SURFACE_STYLE_USAGE(.BOTH.,#280209); +#280209 = SURFACE_SIDE_STYLE('',(#280210)); +#280210 = SURFACE_STYLE_FILL_AREA(#280211); +#280211 = FILL_AREA_STYLE('',(#280212)); +#280212 = FILL_AREA_STYLE_COLOUR('',#279624); +#280213 = OVER_RIDING_STYLED_ITEM('overriding color',(#280214),#73688, + #279608); +#280214 = PRESENTATION_STYLE_ASSIGNMENT((#280215)); +#280215 = SURFACE_STYLE_USAGE(.BOTH.,#280216); +#280216 = SURFACE_SIDE_STYLE('',(#280217)); +#280217 = SURFACE_STYLE_FILL_AREA(#280218); +#280218 = FILL_AREA_STYLE('',(#280219)); +#280219 = FILL_AREA_STYLE_COLOUR('',#279624); +#280220 = OVER_RIDING_STYLED_ITEM('overriding color',(#280221),#73719, + #279608); +#280221 = PRESENTATION_STYLE_ASSIGNMENT((#280222)); +#280222 = SURFACE_STYLE_USAGE(.BOTH.,#280223); +#280223 = SURFACE_SIDE_STYLE('',(#280224)); +#280224 = SURFACE_STYLE_FILL_AREA(#280225); +#280225 = FILL_AREA_STYLE('',(#280226)); +#280226 = FILL_AREA_STYLE_COLOUR('',#279624); +#280227 = OVER_RIDING_STYLED_ITEM('overriding color',(#280228),#73766, + #279608); +#280228 = PRESENTATION_STYLE_ASSIGNMENT((#280229)); +#280229 = SURFACE_STYLE_USAGE(.BOTH.,#280230); +#280230 = SURFACE_SIDE_STYLE('',(#280231)); +#280231 = SURFACE_STYLE_FILL_AREA(#280232); +#280232 = FILL_AREA_STYLE('',(#280233)); +#280233 = FILL_AREA_STYLE_COLOUR('',#279624); +#280234 = OVER_RIDING_STYLED_ITEM('overriding color',(#280235),#73797, + #279608); +#280235 = PRESENTATION_STYLE_ASSIGNMENT((#280236)); +#280236 = SURFACE_STYLE_USAGE(.BOTH.,#280237); +#280237 = SURFACE_SIDE_STYLE('',(#280238)); +#280238 = SURFACE_STYLE_FILL_AREA(#280239); +#280239 = FILL_AREA_STYLE('',(#280240)); +#280240 = FILL_AREA_STYLE_COLOUR('',#279624); +#280241 = OVER_RIDING_STYLED_ITEM('overriding color',(#280242),#73844, + #279608); +#280242 = PRESENTATION_STYLE_ASSIGNMENT((#280243)); +#280243 = SURFACE_STYLE_USAGE(.BOTH.,#280244); +#280244 = SURFACE_SIDE_STYLE('',(#280245)); +#280245 = SURFACE_STYLE_FILL_AREA(#280246); +#280246 = FILL_AREA_STYLE('',(#280247)); +#280247 = FILL_AREA_STYLE_COLOUR('',#279624); +#280248 = OVER_RIDING_STYLED_ITEM('overriding color',(#280249),#73875, + #279608); +#280249 = PRESENTATION_STYLE_ASSIGNMENT((#280250)); +#280250 = SURFACE_STYLE_USAGE(.BOTH.,#280251); +#280251 = SURFACE_SIDE_STYLE('',(#280252)); +#280252 = SURFACE_STYLE_FILL_AREA(#280253); +#280253 = FILL_AREA_STYLE('',(#280254)); +#280254 = FILL_AREA_STYLE_COLOUR('',#279624); +#280255 = OVER_RIDING_STYLED_ITEM('overriding color',(#280256),#73922, + #279608); +#280256 = PRESENTATION_STYLE_ASSIGNMENT((#280257)); +#280257 = SURFACE_STYLE_USAGE(.BOTH.,#280258); +#280258 = SURFACE_SIDE_STYLE('',(#280259)); +#280259 = SURFACE_STYLE_FILL_AREA(#280260); +#280260 = FILL_AREA_STYLE('',(#280261)); +#280261 = FILL_AREA_STYLE_COLOUR('',#279624); +#280262 = OVER_RIDING_STYLED_ITEM('overriding color',(#280263),#73961, + #279608); +#280263 = PRESENTATION_STYLE_ASSIGNMENT((#280264)); +#280264 = SURFACE_STYLE_USAGE(.BOTH.,#280265); +#280265 = SURFACE_SIDE_STYLE('',(#280266)); +#280266 = SURFACE_STYLE_FILL_AREA(#280267); +#280267 = FILL_AREA_STYLE('',(#280268)); +#280268 = FILL_AREA_STYLE_COLOUR('',#279624); +#280269 = OVER_RIDING_STYLED_ITEM('overriding color',(#280270),#74008, + #279608); +#280270 = PRESENTATION_STYLE_ASSIGNMENT((#280271)); +#280271 = SURFACE_STYLE_USAGE(.BOTH.,#280272); +#280272 = SURFACE_SIDE_STYLE('',(#280273)); +#280273 = SURFACE_STYLE_FILL_AREA(#280274); +#280274 = FILL_AREA_STYLE('',(#280275)); +#280275 = FILL_AREA_STYLE_COLOUR('',#279624); +#280276 = OVER_RIDING_STYLED_ITEM('overriding color',(#280277),#74039, + #279608); +#280277 = PRESENTATION_STYLE_ASSIGNMENT((#280278)); +#280278 = SURFACE_STYLE_USAGE(.BOTH.,#280279); +#280279 = SURFACE_SIDE_STYLE('',(#280280)); +#280280 = SURFACE_STYLE_FILL_AREA(#280281); +#280281 = FILL_AREA_STYLE('',(#280282)); +#280282 = FILL_AREA_STYLE_COLOUR('',#279624); +#280283 = OVER_RIDING_STYLED_ITEM('overriding color',(#280284),#74076, + #279608); +#280284 = PRESENTATION_STYLE_ASSIGNMENT((#280285)); +#280285 = SURFACE_STYLE_USAGE(.BOTH.,#280286); +#280286 = SURFACE_SIDE_STYLE('',(#280287)); +#280287 = SURFACE_STYLE_FILL_AREA(#280288); +#280288 = FILL_AREA_STYLE('',(#280289)); +#280289 = FILL_AREA_STYLE_COLOUR('',#279624); +#280290 = OVER_RIDING_STYLED_ITEM('overriding color',(#280291),#74093, + #279608); +#280291 = PRESENTATION_STYLE_ASSIGNMENT((#280292)); +#280292 = SURFACE_STYLE_USAGE(.BOTH.,#280293); +#280293 = SURFACE_SIDE_STYLE('',(#280294)); +#280294 = SURFACE_STYLE_FILL_AREA(#280295); +#280295 = FILL_AREA_STYLE('',(#280296)); +#280296 = FILL_AREA_STYLE_COLOUR('',#279624); +#280297 = OVER_RIDING_STYLED_ITEM('overriding color',(#280298),#74110, + #279608); +#280298 = PRESENTATION_STYLE_ASSIGNMENT((#280299)); +#280299 = SURFACE_STYLE_USAGE(.BOTH.,#280300); +#280300 = SURFACE_SIDE_STYLE('',(#280301)); +#280301 = SURFACE_STYLE_FILL_AREA(#280302); +#280302 = FILL_AREA_STYLE('',(#280303)); +#280303 = FILL_AREA_STYLE_COLOUR('',#279624); +#280304 = OVER_RIDING_STYLED_ITEM('overriding color',(#280305),#74127, + #279608); +#280305 = PRESENTATION_STYLE_ASSIGNMENT((#280306)); +#280306 = SURFACE_STYLE_USAGE(.BOTH.,#280307); +#280307 = SURFACE_SIDE_STYLE('',(#280308)); +#280308 = SURFACE_STYLE_FILL_AREA(#280309); +#280309 = FILL_AREA_STYLE('',(#280310)); +#280310 = FILL_AREA_STYLE_COLOUR('',#279624); +#280311 = OVER_RIDING_STYLED_ITEM('overriding color',(#280312),#74144, + #279608); +#280312 = PRESENTATION_STYLE_ASSIGNMENT((#280313)); +#280313 = SURFACE_STYLE_USAGE(.BOTH.,#280314); +#280314 = SURFACE_SIDE_STYLE('',(#280315)); +#280315 = SURFACE_STYLE_FILL_AREA(#280316); +#280316 = FILL_AREA_STYLE('',(#280317)); +#280317 = FILL_AREA_STYLE_COLOUR('',#279624); +#280318 = OVER_RIDING_STYLED_ITEM('overriding color',(#280319),#74161, + #279608); +#280319 = PRESENTATION_STYLE_ASSIGNMENT((#280320)); +#280320 = SURFACE_STYLE_USAGE(.BOTH.,#280321); +#280321 = SURFACE_SIDE_STYLE('',(#280322)); +#280322 = SURFACE_STYLE_FILL_AREA(#280323); +#280323 = FILL_AREA_STYLE('',(#280324)); +#280324 = FILL_AREA_STYLE_COLOUR('',#279624); +#280325 = OVER_RIDING_STYLED_ITEM('overriding color',(#280326),#74178, + #279608); +#280326 = PRESENTATION_STYLE_ASSIGNMENT((#280327)); +#280327 = SURFACE_STYLE_USAGE(.BOTH.,#280328); +#280328 = SURFACE_SIDE_STYLE('',(#280329)); +#280329 = SURFACE_STYLE_FILL_AREA(#280330); +#280330 = FILL_AREA_STYLE('',(#280331)); +#280331 = FILL_AREA_STYLE_COLOUR('',#279624); +#280332 = OVER_RIDING_STYLED_ITEM('overriding color',(#280333),#74195, + #279608); +#280333 = PRESENTATION_STYLE_ASSIGNMENT((#280334)); +#280334 = SURFACE_STYLE_USAGE(.BOTH.,#280335); +#280335 = SURFACE_SIDE_STYLE('',(#280336)); +#280336 = SURFACE_STYLE_FILL_AREA(#280337); +#280337 = FILL_AREA_STYLE('',(#280338)); +#280338 = FILL_AREA_STYLE_COLOUR('',#279624); +#280339 = OVER_RIDING_STYLED_ITEM('overriding color',(#280340),#74230, + #279608); +#280340 = PRESENTATION_STYLE_ASSIGNMENT((#280341)); +#280341 = SURFACE_STYLE_USAGE(.BOTH.,#280342); +#280342 = SURFACE_SIDE_STYLE('',(#280343)); +#280343 = SURFACE_STYLE_FILL_AREA(#280344); +#280344 = FILL_AREA_STYLE('',(#280345)); +#280345 = FILL_AREA_STYLE_COLOUR('',#279624); +#280346 = OVER_RIDING_STYLED_ITEM('overriding color',(#280347),#74247, + #279608); +#280347 = PRESENTATION_STYLE_ASSIGNMENT((#280348)); +#280348 = SURFACE_STYLE_USAGE(.BOTH.,#280349); +#280349 = SURFACE_SIDE_STYLE('',(#280350)); +#280350 = SURFACE_STYLE_FILL_AREA(#280351); +#280351 = FILL_AREA_STYLE('',(#280352)); +#280352 = FILL_AREA_STYLE_COLOUR('',#279624); +#280353 = OVER_RIDING_STYLED_ITEM('overriding color',(#280354),#74264, + #279608); +#280354 = PRESENTATION_STYLE_ASSIGNMENT((#280355)); +#280355 = SURFACE_STYLE_USAGE(.BOTH.,#280356); +#280356 = SURFACE_SIDE_STYLE('',(#280357)); +#280357 = SURFACE_STYLE_FILL_AREA(#280358); +#280358 = FILL_AREA_STYLE('',(#280359)); +#280359 = FILL_AREA_STYLE_COLOUR('',#279624); +#280360 = OVER_RIDING_STYLED_ITEM('overriding color',(#280361),#74282, + #279608); +#280361 = PRESENTATION_STYLE_ASSIGNMENT((#280362)); +#280362 = SURFACE_STYLE_USAGE(.BOTH.,#280363); +#280363 = SURFACE_SIDE_STYLE('',(#280364)); +#280364 = SURFACE_STYLE_FILL_AREA(#280365); +#280365 = FILL_AREA_STYLE('',(#280366)); +#280366 = FILL_AREA_STYLE_COLOUR('',#279624); +#280367 = OVER_RIDING_STYLED_ITEM('overriding color',(#280368),#74300, + #279608); +#280368 = PRESENTATION_STYLE_ASSIGNMENT((#280369)); +#280369 = SURFACE_STYLE_USAGE(.BOTH.,#280370); +#280370 = SURFACE_SIDE_STYLE('',(#280371)); +#280371 = SURFACE_STYLE_FILL_AREA(#280372); +#280372 = FILL_AREA_STYLE('',(#280373)); +#280373 = FILL_AREA_STYLE_COLOUR('',#279624); +#280374 = OVER_RIDING_STYLED_ITEM('overriding color',(#280375),#74317, + #279608); +#280375 = PRESENTATION_STYLE_ASSIGNMENT((#280376)); +#280376 = SURFACE_STYLE_USAGE(.BOTH.,#280377); +#280377 = SURFACE_SIDE_STYLE('',(#280378)); +#280378 = SURFACE_STYLE_FILL_AREA(#280379); +#280379 = FILL_AREA_STYLE('',(#280380)); +#280380 = FILL_AREA_STYLE_COLOUR('',#279624); +#280381 = OVER_RIDING_STYLED_ITEM('overriding color',(#280382),#74335, + #279608); +#280382 = PRESENTATION_STYLE_ASSIGNMENT((#280383)); +#280383 = SURFACE_STYLE_USAGE(.BOTH.,#280384); +#280384 = SURFACE_SIDE_STYLE('',(#280385)); +#280385 = SURFACE_STYLE_FILL_AREA(#280386); +#280386 = FILL_AREA_STYLE('',(#280387)); +#280387 = FILL_AREA_STYLE_COLOUR('',#279624); +#280388 = OVER_RIDING_STYLED_ITEM('overriding color',(#280389),#74348, + #279608); +#280389 = PRESENTATION_STYLE_ASSIGNMENT((#280390)); +#280390 = SURFACE_STYLE_USAGE(.BOTH.,#280391); +#280391 = SURFACE_SIDE_STYLE('',(#280392)); +#280392 = SURFACE_STYLE_FILL_AREA(#280393); +#280393 = FILL_AREA_STYLE('',(#280394)); +#280394 = FILL_AREA_STYLE_COLOUR('',#279624); +#280395 = OVER_RIDING_STYLED_ITEM('overriding color',(#280396),#74372, + #279608); +#280396 = PRESENTATION_STYLE_ASSIGNMENT((#280397)); +#280397 = SURFACE_STYLE_USAGE(.BOTH.,#280398); +#280398 = SURFACE_SIDE_STYLE('',(#280399)); +#280399 = SURFACE_STYLE_FILL_AREA(#280400); +#280400 = FILL_AREA_STYLE('',(#280401)); +#280401 = FILL_AREA_STYLE_COLOUR('',#279624); +#280402 = OVER_RIDING_STYLED_ITEM('overriding color',(#280403),#74411, + #279608); +#280403 = PRESENTATION_STYLE_ASSIGNMENT((#280404)); +#280404 = SURFACE_STYLE_USAGE(.BOTH.,#280405); +#280405 = SURFACE_SIDE_STYLE('',(#280406)); +#280406 = SURFACE_STYLE_FILL_AREA(#280407); +#280407 = FILL_AREA_STYLE('',(#280408)); +#280408 = FILL_AREA_STYLE_COLOUR('',#279624); +#280409 = OVER_RIDING_STYLED_ITEM('overriding color',(#280410),#74442, + #279608); +#280410 = PRESENTATION_STYLE_ASSIGNMENT((#280411)); +#280411 = SURFACE_STYLE_USAGE(.BOTH.,#280412); +#280412 = SURFACE_SIDE_STYLE('',(#280413)); +#280413 = SURFACE_STYLE_FILL_AREA(#280414); +#280414 = FILL_AREA_STYLE('',(#280415)); +#280415 = FILL_AREA_STYLE_COLOUR('',#279624); +#280416 = OVER_RIDING_STYLED_ITEM('overriding color',(#280417),#74479, + #279608); +#280417 = PRESENTATION_STYLE_ASSIGNMENT((#280418)); +#280418 = SURFACE_STYLE_USAGE(.BOTH.,#280419); +#280419 = SURFACE_SIDE_STYLE('',(#280420)); +#280420 = SURFACE_STYLE_FILL_AREA(#280421); +#280421 = FILL_AREA_STYLE('',(#280422)); +#280422 = FILL_AREA_STYLE_COLOUR('',#279624); +#280423 = OVER_RIDING_STYLED_ITEM('overriding color',(#280424),#74496, + #279608); +#280424 = PRESENTATION_STYLE_ASSIGNMENT((#280425)); +#280425 = SURFACE_STYLE_USAGE(.BOTH.,#280426); +#280426 = SURFACE_SIDE_STYLE('',(#280427)); +#280427 = SURFACE_STYLE_FILL_AREA(#280428); +#280428 = FILL_AREA_STYLE('',(#280429)); +#280429 = FILL_AREA_STYLE_COLOUR('',#279624); +#280430 = OVER_RIDING_STYLED_ITEM('overriding color',(#280431),#74508, + #279608); +#280431 = PRESENTATION_STYLE_ASSIGNMENT((#280432)); +#280432 = SURFACE_STYLE_USAGE(.BOTH.,#280433); +#280433 = SURFACE_SIDE_STYLE('',(#280434)); +#280434 = SURFACE_STYLE_FILL_AREA(#280435); +#280435 = FILL_AREA_STYLE('',(#280436)); +#280436 = FILL_AREA_STYLE_COLOUR('',#279624); +#280437 = OVER_RIDING_STYLED_ITEM('overriding color',(#280438),#74532, + #279608); +#280438 = PRESENTATION_STYLE_ASSIGNMENT((#280439)); +#280439 = SURFACE_STYLE_USAGE(.BOTH.,#280440); +#280440 = SURFACE_SIDE_STYLE('',(#280441)); +#280441 = SURFACE_STYLE_FILL_AREA(#280442); +#280442 = FILL_AREA_STYLE('',(#280443)); +#280443 = FILL_AREA_STYLE_COLOUR('',#279624); +#280444 = OVER_RIDING_STYLED_ITEM('overriding color',(#280445),#74571, + #279608); +#280445 = PRESENTATION_STYLE_ASSIGNMENT((#280446)); +#280446 = SURFACE_STYLE_USAGE(.BOTH.,#280447); +#280447 = SURFACE_SIDE_STYLE('',(#280448)); +#280448 = SURFACE_STYLE_FILL_AREA(#280449); +#280449 = FILL_AREA_STYLE('',(#280450)); +#280450 = FILL_AREA_STYLE_COLOUR('',#279624); +#280451 = OVER_RIDING_STYLED_ITEM('overriding color',(#280452),#74602, + #279608); +#280452 = PRESENTATION_STYLE_ASSIGNMENT((#280453)); +#280453 = SURFACE_STYLE_USAGE(.BOTH.,#280454); +#280454 = SURFACE_SIDE_STYLE('',(#280455)); +#280455 = SURFACE_STYLE_FILL_AREA(#280456); +#280456 = FILL_AREA_STYLE('',(#280457)); +#280457 = FILL_AREA_STYLE_COLOUR('',#279624); +#280458 = OVER_RIDING_STYLED_ITEM('overriding color',(#280459),#74639, + #279608); +#280459 = PRESENTATION_STYLE_ASSIGNMENT((#280460)); +#280460 = SURFACE_STYLE_USAGE(.BOTH.,#280461); +#280461 = SURFACE_SIDE_STYLE('',(#280462)); +#280462 = SURFACE_STYLE_FILL_AREA(#280463); +#280463 = FILL_AREA_STYLE('',(#280464)); +#280464 = FILL_AREA_STYLE_COLOUR('',#279624); +#280465 = OVER_RIDING_STYLED_ITEM('overriding color',(#280466),#74656, + #279608); +#280466 = PRESENTATION_STYLE_ASSIGNMENT((#280467)); +#280467 = SURFACE_STYLE_USAGE(.BOTH.,#280468); +#280468 = SURFACE_SIDE_STYLE('',(#280469)); +#280469 = SURFACE_STYLE_FILL_AREA(#280470); +#280470 = FILL_AREA_STYLE('',(#280471)); +#280471 = FILL_AREA_STYLE_COLOUR('',#279624); +#280472 = OVER_RIDING_STYLED_ITEM('overriding color',(#280473),#74668, + #279608); +#280473 = PRESENTATION_STYLE_ASSIGNMENT((#280474)); +#280474 = SURFACE_STYLE_USAGE(.BOTH.,#280475); +#280475 = SURFACE_SIDE_STYLE('',(#280476)); +#280476 = SURFACE_STYLE_FILL_AREA(#280477); +#280477 = FILL_AREA_STYLE('',(#280478)); +#280478 = FILL_AREA_STYLE_COLOUR('',#279624); +#280479 = OVER_RIDING_STYLED_ITEM('overriding color',(#280480),#74685, + #279608); +#280480 = PRESENTATION_STYLE_ASSIGNMENT((#280481)); +#280481 = SURFACE_STYLE_USAGE(.BOTH.,#280482); +#280482 = SURFACE_SIDE_STYLE('',(#280483)); +#280483 = SURFACE_STYLE_FILL_AREA(#280484); +#280484 = FILL_AREA_STYLE('',(#280485)); +#280485 = FILL_AREA_STYLE_COLOUR('',#279624); +#280486 = OVER_RIDING_STYLED_ITEM('overriding color',(#280487),#74699, + #279608); +#280487 = PRESENTATION_STYLE_ASSIGNMENT((#280488)); +#280488 = SURFACE_STYLE_USAGE(.BOTH.,#280489); +#280489 = SURFACE_SIDE_STYLE('',(#280490)); +#280490 = SURFACE_STYLE_FILL_AREA(#280491); +#280491 = FILL_AREA_STYLE('',(#280492)); +#280492 = FILL_AREA_STYLE_COLOUR('',#279624); +#280493 = OVER_RIDING_STYLED_ITEM('overriding color',(#280494),#74711, + #279608); +#280494 = PRESENTATION_STYLE_ASSIGNMENT((#280495)); +#280495 = SURFACE_STYLE_USAGE(.BOTH.,#280496); +#280496 = SURFACE_SIDE_STYLE('',(#280497)); +#280497 = SURFACE_STYLE_FILL_AREA(#280498); +#280498 = FILL_AREA_STYLE('',(#280499)); +#280499 = FILL_AREA_STYLE_COLOUR('',#279624); +#280500 = OVER_RIDING_STYLED_ITEM('overriding color',(#280501),#74736, + #279608); +#280501 = PRESENTATION_STYLE_ASSIGNMENT((#280502)); +#280502 = SURFACE_STYLE_USAGE(.BOTH.,#280503); +#280503 = SURFACE_SIDE_STYLE('',(#280504)); +#280504 = SURFACE_STYLE_FILL_AREA(#280505); +#280505 = FILL_AREA_STYLE('',(#280506)); +#280506 = FILL_AREA_STYLE_COLOUR('',#279624); +#280507 = OVER_RIDING_STYLED_ITEM('overriding color',(#280508),#74748, + #279608); +#280508 = PRESENTATION_STYLE_ASSIGNMENT((#280509)); +#280509 = SURFACE_STYLE_USAGE(.BOTH.,#280510); +#280510 = SURFACE_SIDE_STYLE('',(#280511)); +#280511 = SURFACE_STYLE_FILL_AREA(#280512); +#280512 = FILL_AREA_STYLE('',(#280513)); +#280513 = FILL_AREA_STYLE_COLOUR('',#279624); +#280514 = OVER_RIDING_STYLED_ITEM('overriding color',(#280515),#74768, + #279608); +#280515 = PRESENTATION_STYLE_ASSIGNMENT((#280516)); +#280516 = SURFACE_STYLE_USAGE(.BOTH.,#280517); +#280517 = SURFACE_SIDE_STYLE('',(#280518)); +#280518 = SURFACE_STYLE_FILL_AREA(#280519); +#280519 = FILL_AREA_STYLE('',(#280520)); +#280520 = FILL_AREA_STYLE_COLOUR('',#279624); +#280521 = OVER_RIDING_STYLED_ITEM('overriding color',(#280522),#74814, + #279608); +#280522 = PRESENTATION_STYLE_ASSIGNMENT((#280523)); +#280523 = SURFACE_STYLE_USAGE(.BOTH.,#280524); +#280524 = SURFACE_SIDE_STYLE('',(#280525)); +#280525 = SURFACE_STYLE_FILL_AREA(#280526); +#280526 = FILL_AREA_STYLE('',(#280527)); +#280527 = FILL_AREA_STYLE_COLOUR('',#279624); +#280528 = OVER_RIDING_STYLED_ITEM('overriding color',(#280529),#74845, + #279608); +#280529 = PRESENTATION_STYLE_ASSIGNMENT((#280530)); +#280530 = SURFACE_STYLE_USAGE(.BOTH.,#280531); +#280531 = SURFACE_SIDE_STYLE('',(#280532)); +#280532 = SURFACE_STYLE_FILL_AREA(#280533); +#280533 = FILL_AREA_STYLE('',(#280534)); +#280534 = FILL_AREA_STYLE_COLOUR('',#279624); +#280535 = OVER_RIDING_STYLED_ITEM('overriding color',(#280536),#74876, + #279608); +#280536 = PRESENTATION_STYLE_ASSIGNMENT((#280537)); +#280537 = SURFACE_STYLE_USAGE(.BOTH.,#280538); +#280538 = SURFACE_SIDE_STYLE('',(#280539)); +#280539 = SURFACE_STYLE_FILL_AREA(#280540); +#280540 = FILL_AREA_STYLE('',(#280541)); +#280541 = FILL_AREA_STYLE_COLOUR('',#279624); +#280542 = OVER_RIDING_STYLED_ITEM('overriding color',(#280543),#74907, + #279608); +#280543 = PRESENTATION_STYLE_ASSIGNMENT((#280544)); +#280544 = SURFACE_STYLE_USAGE(.BOTH.,#280545); +#280545 = SURFACE_SIDE_STYLE('',(#280546)); +#280546 = SURFACE_STYLE_FILL_AREA(#280547); +#280547 = FILL_AREA_STYLE('',(#280548)); +#280548 = FILL_AREA_STYLE_COLOUR('',#279624); +#280549 = OVER_RIDING_STYLED_ITEM('overriding color',(#280550),#74931, + #279608); +#280550 = PRESENTATION_STYLE_ASSIGNMENT((#280551)); +#280551 = SURFACE_STYLE_USAGE(.BOTH.,#280552); +#280552 = SURFACE_SIDE_STYLE('',(#280553)); +#280553 = SURFACE_STYLE_FILL_AREA(#280554); +#280554 = FILL_AREA_STYLE('',(#280555)); +#280555 = FILL_AREA_STYLE_COLOUR('',#279624); +#280556 = OVER_RIDING_STYLED_ITEM('overriding color',(#280557),#74962, + #279608); +#280557 = PRESENTATION_STYLE_ASSIGNMENT((#280558)); +#280558 = SURFACE_STYLE_USAGE(.BOTH.,#280559); +#280559 = SURFACE_SIDE_STYLE('',(#280560)); +#280560 = SURFACE_STYLE_FILL_AREA(#280561); +#280561 = FILL_AREA_STYLE('',(#280562)); +#280562 = FILL_AREA_STYLE_COLOUR('',#279624); +#280563 = OVER_RIDING_STYLED_ITEM('overriding color',(#280564),#74993, + #279608); +#280564 = PRESENTATION_STYLE_ASSIGNMENT((#280565)); +#280565 = SURFACE_STYLE_USAGE(.BOTH.,#280566); +#280566 = SURFACE_SIDE_STYLE('',(#280567)); +#280567 = SURFACE_STYLE_FILL_AREA(#280568); +#280568 = FILL_AREA_STYLE('',(#280569)); +#280569 = FILL_AREA_STYLE_COLOUR('',#279624); +#280570 = OVER_RIDING_STYLED_ITEM('overriding color',(#280571),#75010, + #279608); +#280571 = PRESENTATION_STYLE_ASSIGNMENT((#280572)); +#280572 = SURFACE_STYLE_USAGE(.BOTH.,#280573); +#280573 = SURFACE_SIDE_STYLE('',(#280574)); +#280574 = SURFACE_STYLE_FILL_AREA(#280575); +#280575 = FILL_AREA_STYLE('',(#280576)); +#280576 = FILL_AREA_STYLE_COLOUR('',#279624); +#280577 = OVER_RIDING_STYLED_ITEM('overriding color',(#280578),#75027, + #279608); +#280578 = PRESENTATION_STYLE_ASSIGNMENT((#280579)); +#280579 = SURFACE_STYLE_USAGE(.BOTH.,#280580); +#280580 = SURFACE_SIDE_STYLE('',(#280581)); +#280581 = SURFACE_STYLE_FILL_AREA(#280582); +#280582 = FILL_AREA_STYLE('',(#280583)); +#280583 = FILL_AREA_STYLE_COLOUR('',#279624); +#280584 = OVER_RIDING_STYLED_ITEM('overriding color',(#280585),#75040, + #279608); +#280585 = PRESENTATION_STYLE_ASSIGNMENT((#280586)); +#280586 = SURFACE_STYLE_USAGE(.BOTH.,#280587); +#280587 = SURFACE_SIDE_STYLE('',(#280588)); +#280588 = SURFACE_STYLE_FILL_AREA(#280589); +#280589 = FILL_AREA_STYLE('',(#280590)); +#280590 = FILL_AREA_STYLE_COLOUR('',#279624); +#280591 = OVER_RIDING_STYLED_ITEM('overriding color',(#280592),#75057, + #279608); +#280592 = PRESENTATION_STYLE_ASSIGNMENT((#280593)); +#280593 = SURFACE_STYLE_USAGE(.BOTH.,#280594); +#280594 = SURFACE_SIDE_STYLE('',(#280595)); +#280595 = SURFACE_STYLE_FILL_AREA(#280596); +#280596 = FILL_AREA_STYLE('',(#280597)); +#280597 = FILL_AREA_STYLE_COLOUR('',#279624); +#280598 = OVER_RIDING_STYLED_ITEM('overriding color',(#280599),#75184, + #279608); +#280599 = PRESENTATION_STYLE_ASSIGNMENT((#280600)); +#280600 = SURFACE_STYLE_USAGE(.BOTH.,#280601); +#280601 = SURFACE_SIDE_STYLE('',(#280602)); +#280602 = SURFACE_STYLE_FILL_AREA(#280603); +#280603 = FILL_AREA_STYLE('',(#280604)); +#280604 = FILL_AREA_STYLE_COLOUR('',#279624); +#280605 = OVER_RIDING_STYLED_ITEM('overriding color',(#280606),#75215, + #279608); +#280606 = PRESENTATION_STYLE_ASSIGNMENT((#280607)); +#280607 = SURFACE_STYLE_USAGE(.BOTH.,#280608); +#280608 = SURFACE_SIDE_STYLE('',(#280609)); +#280609 = SURFACE_STYLE_FILL_AREA(#280610); +#280610 = FILL_AREA_STYLE('',(#280611)); +#280611 = FILL_AREA_STYLE_COLOUR('',#279624); +#280612 = OVER_RIDING_STYLED_ITEM('overriding color',(#280613),#75246, + #279608); +#280613 = PRESENTATION_STYLE_ASSIGNMENT((#280614)); +#280614 = SURFACE_STYLE_USAGE(.BOTH.,#280615); +#280615 = SURFACE_SIDE_STYLE('',(#280616)); +#280616 = SURFACE_STYLE_FILL_AREA(#280617); +#280617 = FILL_AREA_STYLE('',(#280618)); +#280618 = FILL_AREA_STYLE_COLOUR('',#279624); +#280619 = OVER_RIDING_STYLED_ITEM('overriding color',(#280620),#75263, + #279608); +#280620 = PRESENTATION_STYLE_ASSIGNMENT((#280621)); +#280621 = SURFACE_STYLE_USAGE(.BOTH.,#280622); +#280622 = SURFACE_SIDE_STYLE('',(#280623)); +#280623 = SURFACE_STYLE_FILL_AREA(#280624); +#280624 = FILL_AREA_STYLE('',(#280625)); +#280625 = FILL_AREA_STYLE_COLOUR('',#279624); +#280626 = OVER_RIDING_STYLED_ITEM('overriding color',(#280627),#75280, + #279608); +#280627 = PRESENTATION_STYLE_ASSIGNMENT((#280628)); +#280628 = SURFACE_STYLE_USAGE(.BOTH.,#280629); +#280629 = SURFACE_SIDE_STYLE('',(#280630)); +#280630 = SURFACE_STYLE_FILL_AREA(#280631); +#280631 = FILL_AREA_STYLE('',(#280632)); +#280632 = FILL_AREA_STYLE_COLOUR('',#279624); +#280633 = OVER_RIDING_STYLED_ITEM('overriding color',(#280634),#75292, + #279608); +#280634 = PRESENTATION_STYLE_ASSIGNMENT((#280635)); +#280635 = SURFACE_STYLE_USAGE(.BOTH.,#280636); +#280636 = SURFACE_SIDE_STYLE('',(#280637)); +#280637 = SURFACE_STYLE_FILL_AREA(#280638); +#280638 = FILL_AREA_STYLE('',(#280639)); +#280639 = FILL_AREA_STYLE_COLOUR('',#279624); +#280640 = OVER_RIDING_STYLED_ITEM('overriding color',(#280641),#75323, + #279608); +#280641 = PRESENTATION_STYLE_ASSIGNMENT((#280642)); +#280642 = SURFACE_STYLE_USAGE(.BOTH.,#280643); +#280643 = SURFACE_SIDE_STYLE('',(#280644)); +#280644 = SURFACE_STYLE_FILL_AREA(#280645); +#280645 = FILL_AREA_STYLE('',(#280646)); +#280646 = FILL_AREA_STYLE_COLOUR('',#279624); +#280647 = OVER_RIDING_STYLED_ITEM('overriding color',(#280648),#75354, + #279608); +#280648 = PRESENTATION_STYLE_ASSIGNMENT((#280649)); +#280649 = SURFACE_STYLE_USAGE(.BOTH.,#280650); +#280650 = SURFACE_SIDE_STYLE('',(#280651)); +#280651 = SURFACE_STYLE_FILL_AREA(#280652); +#280652 = FILL_AREA_STYLE('',(#280653)); +#280653 = FILL_AREA_STYLE_COLOUR('',#279624); +#280654 = OVER_RIDING_STYLED_ITEM('overriding color',(#280655),#75371, + #279608); +#280655 = PRESENTATION_STYLE_ASSIGNMENT((#280656)); +#280656 = SURFACE_STYLE_USAGE(.BOTH.,#280657); +#280657 = SURFACE_SIDE_STYLE('',(#280658)); +#280658 = SURFACE_STYLE_FILL_AREA(#280659); +#280659 = FILL_AREA_STYLE('',(#280660)); +#280660 = FILL_AREA_STYLE_COLOUR('',#279624); +#280661 = OVER_RIDING_STYLED_ITEM('overriding color',(#280662),#75388, + #279608); +#280662 = PRESENTATION_STYLE_ASSIGNMENT((#280663)); +#280663 = SURFACE_STYLE_USAGE(.BOTH.,#280664); +#280664 = SURFACE_SIDE_STYLE('',(#280665)); +#280665 = SURFACE_STYLE_FILL_AREA(#280666); +#280666 = FILL_AREA_STYLE('',(#280667)); +#280667 = FILL_AREA_STYLE_COLOUR('',#279624); +#280668 = OVER_RIDING_STYLED_ITEM('overriding color',(#280669),#75400, + #279608); +#280669 = PRESENTATION_STYLE_ASSIGNMENT((#280670)); +#280670 = SURFACE_STYLE_USAGE(.BOTH.,#280671); +#280671 = SURFACE_SIDE_STYLE('',(#280672)); +#280672 = SURFACE_STYLE_FILL_AREA(#280673); +#280673 = FILL_AREA_STYLE('',(#280674)); +#280674 = FILL_AREA_STYLE_COLOUR('',#279624); +#280675 = STYLED_ITEM('color',(#280676),#75412); +#280676 = PRESENTATION_STYLE_ASSIGNMENT((#280677,#280682)); +#280677 = SURFACE_STYLE_USAGE(.BOTH.,#280678); +#280678 = SURFACE_SIDE_STYLE('',(#280679)); +#280679 = SURFACE_STYLE_FILL_AREA(#280680); +#280680 = FILL_AREA_STYLE('',(#280681)); +#280681 = FILL_AREA_STYLE_COLOUR('',#278623); +#280682 = CURVE_STYLE('',#280683,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280684 = OVER_RIDING_STYLED_ITEM('overriding color',(#280685),#75414, + #280675); +#280685 = PRESENTATION_STYLE_ASSIGNMENT((#280686)); +#280686 = SURFACE_STYLE_USAGE(.BOTH.,#280687); +#280687 = SURFACE_SIDE_STYLE('',(#280688)); +#280688 = SURFACE_STYLE_FILL_AREA(#280689); +#280689 = FILL_AREA_STYLE('',(#280690)); +#280690 = FILL_AREA_STYLE_COLOUR('',#280691); +#280691 = COLOUR_RGB('',0.859000020776,0.737999965183,0.495999988746); +#280692 = OVER_RIDING_STYLED_ITEM('overriding color',(#280693),#75454, + #280675); +#280693 = PRESENTATION_STYLE_ASSIGNMENT((#280694)); +#280694 = SURFACE_STYLE_USAGE(.BOTH.,#280695); +#280695 = SURFACE_SIDE_STYLE('',(#280696)); +#280696 = SURFACE_STYLE_FILL_AREA(#280697); +#280697 = FILL_AREA_STYLE('',(#280698)); +#280698 = FILL_AREA_STYLE_COLOUR('',#280691); +#280699 = OVER_RIDING_STYLED_ITEM('overriding color',(#280700),#75485, + #280675); +#280700 = PRESENTATION_STYLE_ASSIGNMENT((#280701)); +#280701 = SURFACE_STYLE_USAGE(.BOTH.,#280702); +#280702 = SURFACE_SIDE_STYLE('',(#280703)); +#280703 = SURFACE_STYLE_FILL_AREA(#280704); +#280704 = FILL_AREA_STYLE('',(#280705)); +#280705 = FILL_AREA_STYLE_COLOUR('',#280691); +#280706 = OVER_RIDING_STYLED_ITEM('overriding color',(#280707),#75516, + #280675); +#280707 = PRESENTATION_STYLE_ASSIGNMENT((#280708)); +#280708 = SURFACE_STYLE_USAGE(.BOTH.,#280709); +#280709 = SURFACE_SIDE_STYLE('',(#280710)); +#280710 = SURFACE_STYLE_FILL_AREA(#280711); +#280711 = FILL_AREA_STYLE('',(#280712)); +#280712 = FILL_AREA_STYLE_COLOUR('',#280691); +#280713 = OVER_RIDING_STYLED_ITEM('overriding color',(#280714),#75538, + #280675); +#280714 = PRESENTATION_STYLE_ASSIGNMENT((#280715)); +#280715 = SURFACE_STYLE_USAGE(.BOTH.,#280716); +#280716 = SURFACE_SIDE_STYLE('',(#280717)); +#280717 = SURFACE_STYLE_FILL_AREA(#280718); +#280718 = FILL_AREA_STYLE('',(#280719)); +#280719 = FILL_AREA_STYLE_COLOUR('',#280691); +#280720 = OVER_RIDING_STYLED_ITEM('overriding color',(#280721),#75550, + #280675); +#280721 = PRESENTATION_STYLE_ASSIGNMENT((#280722)); +#280722 = SURFACE_STYLE_USAGE(.BOTH.,#280723); +#280723 = SURFACE_SIDE_STYLE('',(#280724)); +#280724 = SURFACE_STYLE_FILL_AREA(#280725); +#280725 = FILL_AREA_STYLE('',(#280726)); +#280726 = FILL_AREA_STYLE_COLOUR('',#280691); +#280727 = STYLED_ITEM('color',(#280728),#75562); +#280728 = PRESENTATION_STYLE_ASSIGNMENT((#280729,#280734)); +#280729 = SURFACE_STYLE_USAGE(.BOTH.,#280730); +#280730 = SURFACE_SIDE_STYLE('',(#280731)); +#280731 = SURFACE_STYLE_FILL_AREA(#280732); +#280732 = FILL_AREA_STYLE('',(#280733)); +#280733 = FILL_AREA_STYLE_COLOUR('',#278623); +#280734 = CURVE_STYLE('',#280735,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280735 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280736 = OVER_RIDING_STYLED_ITEM('overriding color',(#280737),#75564, + #280727); +#280737 = PRESENTATION_STYLE_ASSIGNMENT((#280738)); +#280738 = SURFACE_STYLE_USAGE(.BOTH.,#280739); +#280739 = SURFACE_SIDE_STYLE('',(#280740)); +#280740 = SURFACE_STYLE_FILL_AREA(#280741); +#280741 = FILL_AREA_STYLE('',(#280742)); +#280742 = FILL_AREA_STYLE_COLOUR('',#280691); +#280743 = OVER_RIDING_STYLED_ITEM('overriding color',(#280744),#75604, + #280727); +#280744 = PRESENTATION_STYLE_ASSIGNMENT((#280745)); +#280745 = SURFACE_STYLE_USAGE(.BOTH.,#280746); +#280746 = SURFACE_SIDE_STYLE('',(#280747)); +#280747 = SURFACE_STYLE_FILL_AREA(#280748); +#280748 = FILL_AREA_STYLE('',(#280749)); +#280749 = FILL_AREA_STYLE_COLOUR('',#280691); +#280750 = OVER_RIDING_STYLED_ITEM('overriding color',(#280751),#75635, + #280727); +#280751 = PRESENTATION_STYLE_ASSIGNMENT((#280752)); +#280752 = SURFACE_STYLE_USAGE(.BOTH.,#280753); +#280753 = SURFACE_SIDE_STYLE('',(#280754)); +#280754 = SURFACE_STYLE_FILL_AREA(#280755); +#280755 = FILL_AREA_STYLE('',(#280756)); +#280756 = FILL_AREA_STYLE_COLOUR('',#280691); +#280757 = OVER_RIDING_STYLED_ITEM('overriding color',(#280758),#75666, + #280727); +#280758 = PRESENTATION_STYLE_ASSIGNMENT((#280759)); +#280759 = SURFACE_STYLE_USAGE(.BOTH.,#280760); +#280760 = SURFACE_SIDE_STYLE('',(#280761)); +#280761 = SURFACE_STYLE_FILL_AREA(#280762); +#280762 = FILL_AREA_STYLE('',(#280763)); +#280763 = FILL_AREA_STYLE_COLOUR('',#280691); +#280764 = OVER_RIDING_STYLED_ITEM('overriding color',(#280765),#75688, + #280727); +#280765 = PRESENTATION_STYLE_ASSIGNMENT((#280766)); +#280766 = SURFACE_STYLE_USAGE(.BOTH.,#280767); +#280767 = SURFACE_SIDE_STYLE('',(#280768)); +#280768 = SURFACE_STYLE_FILL_AREA(#280769); +#280769 = FILL_AREA_STYLE('',(#280770)); +#280770 = FILL_AREA_STYLE_COLOUR('',#280691); +#280771 = OVER_RIDING_STYLED_ITEM('overriding color',(#280772),#75700, + #280727); +#280772 = PRESENTATION_STYLE_ASSIGNMENT((#280773)); +#280773 = SURFACE_STYLE_USAGE(.BOTH.,#280774); +#280774 = SURFACE_SIDE_STYLE('',(#280775)); +#280775 = SURFACE_STYLE_FILL_AREA(#280776); +#280776 = FILL_AREA_STYLE('',(#280777)); +#280777 = FILL_AREA_STYLE_COLOUR('',#280691); +#280778 = STYLED_ITEM('color',(#280779),#75712); +#280779 = PRESENTATION_STYLE_ASSIGNMENT((#280780,#280785)); +#280780 = SURFACE_STYLE_USAGE(.BOTH.,#280781); +#280781 = SURFACE_SIDE_STYLE('',(#280782)); +#280782 = SURFACE_STYLE_FILL_AREA(#280783); +#280783 = FILL_AREA_STYLE('',(#280784)); +#280784 = FILL_AREA_STYLE_COLOUR('',#278623); +#280785 = CURVE_STYLE('',#280786,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280787 = OVER_RIDING_STYLED_ITEM('overriding color',(#280788),#75714, + #280778); +#280788 = PRESENTATION_STYLE_ASSIGNMENT((#280789)); +#280789 = SURFACE_STYLE_USAGE(.BOTH.,#280790); +#280790 = SURFACE_SIDE_STYLE('',(#280791)); +#280791 = SURFACE_STYLE_FILL_AREA(#280792); +#280792 = FILL_AREA_STYLE('',(#280793)); +#280793 = FILL_AREA_STYLE_COLOUR('',#280691); +#280794 = OVER_RIDING_STYLED_ITEM('overriding color',(#280795),#75754, + #280778); +#280795 = PRESENTATION_STYLE_ASSIGNMENT((#280796)); +#280796 = SURFACE_STYLE_USAGE(.BOTH.,#280797); +#280797 = SURFACE_SIDE_STYLE('',(#280798)); +#280798 = SURFACE_STYLE_FILL_AREA(#280799); +#280799 = FILL_AREA_STYLE('',(#280800)); +#280800 = FILL_AREA_STYLE_COLOUR('',#280691); +#280801 = OVER_RIDING_STYLED_ITEM('overriding color',(#280802),#75785, + #280778); +#280802 = PRESENTATION_STYLE_ASSIGNMENT((#280803)); +#280803 = SURFACE_STYLE_USAGE(.BOTH.,#280804); +#280804 = SURFACE_SIDE_STYLE('',(#280805)); +#280805 = SURFACE_STYLE_FILL_AREA(#280806); +#280806 = FILL_AREA_STYLE('',(#280807)); +#280807 = FILL_AREA_STYLE_COLOUR('',#280691); +#280808 = OVER_RIDING_STYLED_ITEM('overriding color',(#280809),#75816, + #280778); +#280809 = PRESENTATION_STYLE_ASSIGNMENT((#280810)); +#280810 = SURFACE_STYLE_USAGE(.BOTH.,#280811); +#280811 = SURFACE_SIDE_STYLE('',(#280812)); +#280812 = SURFACE_STYLE_FILL_AREA(#280813); +#280813 = FILL_AREA_STYLE('',(#280814)); +#280814 = FILL_AREA_STYLE_COLOUR('',#280691); +#280815 = OVER_RIDING_STYLED_ITEM('overriding color',(#280816),#75838, + #280778); +#280816 = PRESENTATION_STYLE_ASSIGNMENT((#280817)); +#280817 = SURFACE_STYLE_USAGE(.BOTH.,#280818); +#280818 = SURFACE_SIDE_STYLE('',(#280819)); +#280819 = SURFACE_STYLE_FILL_AREA(#280820); +#280820 = FILL_AREA_STYLE('',(#280821)); +#280821 = FILL_AREA_STYLE_COLOUR('',#280691); +#280822 = OVER_RIDING_STYLED_ITEM('overriding color',(#280823),#75850, + #280778); +#280823 = PRESENTATION_STYLE_ASSIGNMENT((#280824)); +#280824 = SURFACE_STYLE_USAGE(.BOTH.,#280825); +#280825 = SURFACE_SIDE_STYLE('',(#280826)); +#280826 = SURFACE_STYLE_FILL_AREA(#280827); +#280827 = FILL_AREA_STYLE('',(#280828)); +#280828 = FILL_AREA_STYLE_COLOUR('',#280691); +#280829 = STYLED_ITEM('color',(#280830),#75862); +#280830 = PRESENTATION_STYLE_ASSIGNMENT((#280831,#280836)); +#280831 = SURFACE_STYLE_USAGE(.BOTH.,#280832); +#280832 = SURFACE_SIDE_STYLE('',(#280833)); +#280833 = SURFACE_STYLE_FILL_AREA(#280834); +#280834 = FILL_AREA_STYLE('',(#280835)); +#280835 = FILL_AREA_STYLE_COLOUR('',#278623); +#280836 = CURVE_STYLE('',#280837,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280837 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280838 = OVER_RIDING_STYLED_ITEM('overriding color',(#280839),#75864, + #280829); +#280839 = PRESENTATION_STYLE_ASSIGNMENT((#280840)); +#280840 = SURFACE_STYLE_USAGE(.BOTH.,#280841); +#280841 = SURFACE_SIDE_STYLE('',(#280842)); +#280842 = SURFACE_STYLE_FILL_AREA(#280843); +#280843 = FILL_AREA_STYLE('',(#280844)); +#280844 = FILL_AREA_STYLE_COLOUR('',#280691); +#280845 = OVER_RIDING_STYLED_ITEM('overriding color',(#280846),#75904, + #280829); +#280846 = PRESENTATION_STYLE_ASSIGNMENT((#280847)); +#280847 = SURFACE_STYLE_USAGE(.BOTH.,#280848); +#280848 = SURFACE_SIDE_STYLE('',(#280849)); +#280849 = SURFACE_STYLE_FILL_AREA(#280850); +#280850 = FILL_AREA_STYLE('',(#280851)); +#280851 = FILL_AREA_STYLE_COLOUR('',#280691); +#280852 = OVER_RIDING_STYLED_ITEM('overriding color',(#280853),#75935, + #280829); +#280853 = PRESENTATION_STYLE_ASSIGNMENT((#280854)); +#280854 = SURFACE_STYLE_USAGE(.BOTH.,#280855); +#280855 = SURFACE_SIDE_STYLE('',(#280856)); +#280856 = SURFACE_STYLE_FILL_AREA(#280857); +#280857 = FILL_AREA_STYLE('',(#280858)); +#280858 = FILL_AREA_STYLE_COLOUR('',#280691); +#280859 = OVER_RIDING_STYLED_ITEM('overriding color',(#280860),#75966, + #280829); +#280860 = PRESENTATION_STYLE_ASSIGNMENT((#280861)); +#280861 = SURFACE_STYLE_USAGE(.BOTH.,#280862); +#280862 = SURFACE_SIDE_STYLE('',(#280863)); +#280863 = SURFACE_STYLE_FILL_AREA(#280864); +#280864 = FILL_AREA_STYLE('',(#280865)); +#280865 = FILL_AREA_STYLE_COLOUR('',#280691); +#280866 = OVER_RIDING_STYLED_ITEM('overriding color',(#280867),#75988, + #280829); +#280867 = PRESENTATION_STYLE_ASSIGNMENT((#280868)); +#280868 = SURFACE_STYLE_USAGE(.BOTH.,#280869); +#280869 = SURFACE_SIDE_STYLE('',(#280870)); +#280870 = SURFACE_STYLE_FILL_AREA(#280871); +#280871 = FILL_AREA_STYLE('',(#280872)); +#280872 = FILL_AREA_STYLE_COLOUR('',#280691); +#280873 = OVER_RIDING_STYLED_ITEM('overriding color',(#280874),#76000, + #280829); +#280874 = PRESENTATION_STYLE_ASSIGNMENT((#280875)); +#280875 = SURFACE_STYLE_USAGE(.BOTH.,#280876); +#280876 = SURFACE_SIDE_STYLE('',(#280877)); +#280877 = SURFACE_STYLE_FILL_AREA(#280878); +#280878 = FILL_AREA_STYLE('',(#280879)); +#280879 = FILL_AREA_STYLE_COLOUR('',#280691); +#280880 = STYLED_ITEM('color',(#280881),#76012); +#280881 = PRESENTATION_STYLE_ASSIGNMENT((#280882,#280887)); +#280882 = SURFACE_STYLE_USAGE(.BOTH.,#280883); +#280883 = SURFACE_SIDE_STYLE('',(#280884)); +#280884 = SURFACE_STYLE_FILL_AREA(#280885); +#280885 = FILL_AREA_STYLE('',(#280886)); +#280886 = FILL_AREA_STYLE_COLOUR('',#278623); +#280887 = CURVE_STYLE('',#280888,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280888 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280889 = OVER_RIDING_STYLED_ITEM('overriding color',(#280890),#76014, + #280880); +#280890 = PRESENTATION_STYLE_ASSIGNMENT((#280891)); +#280891 = SURFACE_STYLE_USAGE(.BOTH.,#280892); +#280892 = SURFACE_SIDE_STYLE('',(#280893)); +#280893 = SURFACE_STYLE_FILL_AREA(#280894); +#280894 = FILL_AREA_STYLE('',(#280895)); +#280895 = FILL_AREA_STYLE_COLOUR('',#280691); +#280896 = OVER_RIDING_STYLED_ITEM('overriding color',(#280897),#76054, + #280880); +#280897 = PRESENTATION_STYLE_ASSIGNMENT((#280898)); +#280898 = SURFACE_STYLE_USAGE(.BOTH.,#280899); +#280899 = SURFACE_SIDE_STYLE('',(#280900)); +#280900 = SURFACE_STYLE_FILL_AREA(#280901); +#280901 = FILL_AREA_STYLE('',(#280902)); +#280902 = FILL_AREA_STYLE_COLOUR('',#280691); +#280903 = OVER_RIDING_STYLED_ITEM('overriding color',(#280904),#76085, + #280880); +#280904 = PRESENTATION_STYLE_ASSIGNMENT((#280905)); +#280905 = SURFACE_STYLE_USAGE(.BOTH.,#280906); +#280906 = SURFACE_SIDE_STYLE('',(#280907)); +#280907 = SURFACE_STYLE_FILL_AREA(#280908); +#280908 = FILL_AREA_STYLE('',(#280909)); +#280909 = FILL_AREA_STYLE_COLOUR('',#280691); +#280910 = OVER_RIDING_STYLED_ITEM('overriding color',(#280911),#76116, + #280880); +#280911 = PRESENTATION_STYLE_ASSIGNMENT((#280912)); +#280912 = SURFACE_STYLE_USAGE(.BOTH.,#280913); +#280913 = SURFACE_SIDE_STYLE('',(#280914)); +#280914 = SURFACE_STYLE_FILL_AREA(#280915); +#280915 = FILL_AREA_STYLE('',(#280916)); +#280916 = FILL_AREA_STYLE_COLOUR('',#280691); +#280917 = OVER_RIDING_STYLED_ITEM('overriding color',(#280918),#76138, + #280880); +#280918 = PRESENTATION_STYLE_ASSIGNMENT((#280919)); +#280919 = SURFACE_STYLE_USAGE(.BOTH.,#280920); +#280920 = SURFACE_SIDE_STYLE('',(#280921)); +#280921 = SURFACE_STYLE_FILL_AREA(#280922); +#280922 = FILL_AREA_STYLE('',(#280923)); +#280923 = FILL_AREA_STYLE_COLOUR('',#280691); +#280924 = OVER_RIDING_STYLED_ITEM('overriding color',(#280925),#76150, + #280880); +#280925 = PRESENTATION_STYLE_ASSIGNMENT((#280926)); +#280926 = SURFACE_STYLE_USAGE(.BOTH.,#280927); +#280927 = SURFACE_SIDE_STYLE('',(#280928)); +#280928 = SURFACE_STYLE_FILL_AREA(#280929); +#280929 = FILL_AREA_STYLE('',(#280930)); +#280930 = FILL_AREA_STYLE_COLOUR('',#280691); +#280931 = STYLED_ITEM('color',(#280932),#76162); +#280932 = PRESENTATION_STYLE_ASSIGNMENT((#280933,#280938)); +#280933 = SURFACE_STYLE_USAGE(.BOTH.,#280934); +#280934 = SURFACE_SIDE_STYLE('',(#280935)); +#280935 = SURFACE_STYLE_FILL_AREA(#280936); +#280936 = FILL_AREA_STYLE('',(#280937)); +#280937 = FILL_AREA_STYLE_COLOUR('',#278623); +#280938 = CURVE_STYLE('',#280939,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280940 = OVER_RIDING_STYLED_ITEM('overriding color',(#280941),#76164, + #280931); +#280941 = PRESENTATION_STYLE_ASSIGNMENT((#280942)); +#280942 = SURFACE_STYLE_USAGE(.BOTH.,#280943); +#280943 = SURFACE_SIDE_STYLE('',(#280944)); +#280944 = SURFACE_STYLE_FILL_AREA(#280945); +#280945 = FILL_AREA_STYLE('',(#280946)); +#280946 = FILL_AREA_STYLE_COLOUR('',#280691); +#280947 = OVER_RIDING_STYLED_ITEM('overriding color',(#280948),#76204, + #280931); +#280948 = PRESENTATION_STYLE_ASSIGNMENT((#280949)); +#280949 = SURFACE_STYLE_USAGE(.BOTH.,#280950); +#280950 = SURFACE_SIDE_STYLE('',(#280951)); +#280951 = SURFACE_STYLE_FILL_AREA(#280952); +#280952 = FILL_AREA_STYLE('',(#280953)); +#280953 = FILL_AREA_STYLE_COLOUR('',#280691); +#280954 = OVER_RIDING_STYLED_ITEM('overriding color',(#280955),#76235, + #280931); +#280955 = PRESENTATION_STYLE_ASSIGNMENT((#280956)); +#280956 = SURFACE_STYLE_USAGE(.BOTH.,#280957); +#280957 = SURFACE_SIDE_STYLE('',(#280958)); +#280958 = SURFACE_STYLE_FILL_AREA(#280959); +#280959 = FILL_AREA_STYLE('',(#280960)); +#280960 = FILL_AREA_STYLE_COLOUR('',#280691); +#280961 = OVER_RIDING_STYLED_ITEM('overriding color',(#280962),#76266, + #280931); +#280962 = PRESENTATION_STYLE_ASSIGNMENT((#280963)); +#280963 = SURFACE_STYLE_USAGE(.BOTH.,#280964); +#280964 = SURFACE_SIDE_STYLE('',(#280965)); +#280965 = SURFACE_STYLE_FILL_AREA(#280966); +#280966 = FILL_AREA_STYLE('',(#280967)); +#280967 = FILL_AREA_STYLE_COLOUR('',#280691); +#280968 = OVER_RIDING_STYLED_ITEM('overriding color',(#280969),#76288, + #280931); +#280969 = PRESENTATION_STYLE_ASSIGNMENT((#280970)); +#280970 = SURFACE_STYLE_USAGE(.BOTH.,#280971); +#280971 = SURFACE_SIDE_STYLE('',(#280972)); +#280972 = SURFACE_STYLE_FILL_AREA(#280973); +#280973 = FILL_AREA_STYLE('',(#280974)); +#280974 = FILL_AREA_STYLE_COLOUR('',#280691); +#280975 = OVER_RIDING_STYLED_ITEM('overriding color',(#280976),#76300, + #280931); +#280976 = PRESENTATION_STYLE_ASSIGNMENT((#280977)); +#280977 = SURFACE_STYLE_USAGE(.BOTH.,#280978); +#280978 = SURFACE_SIDE_STYLE('',(#280979)); +#280979 = SURFACE_STYLE_FILL_AREA(#280980); +#280980 = FILL_AREA_STYLE('',(#280981)); +#280981 = FILL_AREA_STYLE_COLOUR('',#280691); +#280982 = STYLED_ITEM('color',(#280983),#76312); +#280983 = PRESENTATION_STYLE_ASSIGNMENT((#280984,#280989)); +#280984 = SURFACE_STYLE_USAGE(.BOTH.,#280985); +#280985 = SURFACE_SIDE_STYLE('',(#280986)); +#280986 = SURFACE_STYLE_FILL_AREA(#280987); +#280987 = FILL_AREA_STYLE('',(#280988)); +#280988 = FILL_AREA_STYLE_COLOUR('',#278623); +#280989 = CURVE_STYLE('',#280990,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#280990 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#280991 = OVER_RIDING_STYLED_ITEM('overriding color',(#280992),#76314, + #280982); +#280992 = PRESENTATION_STYLE_ASSIGNMENT((#280993)); +#280993 = SURFACE_STYLE_USAGE(.BOTH.,#280994); +#280994 = SURFACE_SIDE_STYLE('',(#280995)); +#280995 = SURFACE_STYLE_FILL_AREA(#280996); +#280996 = FILL_AREA_STYLE('',(#280997)); +#280997 = FILL_AREA_STYLE_COLOUR('',#280691); +#280998 = OVER_RIDING_STYLED_ITEM('overriding color',(#280999),#76354, + #280982); +#280999 = PRESENTATION_STYLE_ASSIGNMENT((#281000)); +#281000 = SURFACE_STYLE_USAGE(.BOTH.,#281001); +#281001 = SURFACE_SIDE_STYLE('',(#281002)); +#281002 = SURFACE_STYLE_FILL_AREA(#281003); +#281003 = FILL_AREA_STYLE('',(#281004)); +#281004 = FILL_AREA_STYLE_COLOUR('',#280691); +#281005 = OVER_RIDING_STYLED_ITEM('overriding color',(#281006),#76385, + #280982); +#281006 = PRESENTATION_STYLE_ASSIGNMENT((#281007)); +#281007 = SURFACE_STYLE_USAGE(.BOTH.,#281008); +#281008 = SURFACE_SIDE_STYLE('',(#281009)); +#281009 = SURFACE_STYLE_FILL_AREA(#281010); +#281010 = FILL_AREA_STYLE('',(#281011)); +#281011 = FILL_AREA_STYLE_COLOUR('',#280691); +#281012 = OVER_RIDING_STYLED_ITEM('overriding color',(#281013),#76416, + #280982); +#281013 = PRESENTATION_STYLE_ASSIGNMENT((#281014)); +#281014 = SURFACE_STYLE_USAGE(.BOTH.,#281015); +#281015 = SURFACE_SIDE_STYLE('',(#281016)); +#281016 = SURFACE_STYLE_FILL_AREA(#281017); +#281017 = FILL_AREA_STYLE('',(#281018)); +#281018 = FILL_AREA_STYLE_COLOUR('',#280691); +#281019 = OVER_RIDING_STYLED_ITEM('overriding color',(#281020),#76438, + #280982); +#281020 = PRESENTATION_STYLE_ASSIGNMENT((#281021)); +#281021 = SURFACE_STYLE_USAGE(.BOTH.,#281022); +#281022 = SURFACE_SIDE_STYLE('',(#281023)); +#281023 = SURFACE_STYLE_FILL_AREA(#281024); +#281024 = FILL_AREA_STYLE('',(#281025)); +#281025 = FILL_AREA_STYLE_COLOUR('',#280691); +#281026 = OVER_RIDING_STYLED_ITEM('overriding color',(#281027),#76450, + #280982); +#281027 = PRESENTATION_STYLE_ASSIGNMENT((#281028)); +#281028 = SURFACE_STYLE_USAGE(.BOTH.,#281029); +#281029 = SURFACE_SIDE_STYLE('',(#281030)); +#281030 = SURFACE_STYLE_FILL_AREA(#281031); +#281031 = FILL_AREA_STYLE('',(#281032)); +#281032 = FILL_AREA_STYLE_COLOUR('',#280691); +#281033 = STYLED_ITEM('color',(#281034),#76462); +#281034 = PRESENTATION_STYLE_ASSIGNMENT((#281035,#281040)); +#281035 = SURFACE_STYLE_USAGE(.BOTH.,#281036); +#281036 = SURFACE_SIDE_STYLE('',(#281037)); +#281037 = SURFACE_STYLE_FILL_AREA(#281038); +#281038 = FILL_AREA_STYLE('',(#281039)); +#281039 = FILL_AREA_STYLE_COLOUR('',#278623); +#281040 = CURVE_STYLE('',#281041,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281041 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281042 = OVER_RIDING_STYLED_ITEM('overriding color',(#281043),#76464, + #281033); +#281043 = PRESENTATION_STYLE_ASSIGNMENT((#281044)); +#281044 = SURFACE_STYLE_USAGE(.BOTH.,#281045); +#281045 = SURFACE_SIDE_STYLE('',(#281046)); +#281046 = SURFACE_STYLE_FILL_AREA(#281047); +#281047 = FILL_AREA_STYLE('',(#281048)); +#281048 = FILL_AREA_STYLE_COLOUR('',#280691); +#281049 = OVER_RIDING_STYLED_ITEM('overriding color',(#281050),#76504, + #281033); +#281050 = PRESENTATION_STYLE_ASSIGNMENT((#281051)); +#281051 = SURFACE_STYLE_USAGE(.BOTH.,#281052); +#281052 = SURFACE_SIDE_STYLE('',(#281053)); +#281053 = SURFACE_STYLE_FILL_AREA(#281054); +#281054 = FILL_AREA_STYLE('',(#281055)); +#281055 = FILL_AREA_STYLE_COLOUR('',#280691); +#281056 = OVER_RIDING_STYLED_ITEM('overriding color',(#281057),#76535, + #281033); +#281057 = PRESENTATION_STYLE_ASSIGNMENT((#281058)); +#281058 = SURFACE_STYLE_USAGE(.BOTH.,#281059); +#281059 = SURFACE_SIDE_STYLE('',(#281060)); +#281060 = SURFACE_STYLE_FILL_AREA(#281061); +#281061 = FILL_AREA_STYLE('',(#281062)); +#281062 = FILL_AREA_STYLE_COLOUR('',#280691); +#281063 = OVER_RIDING_STYLED_ITEM('overriding color',(#281064),#76566, + #281033); +#281064 = PRESENTATION_STYLE_ASSIGNMENT((#281065)); +#281065 = SURFACE_STYLE_USAGE(.BOTH.,#281066); +#281066 = SURFACE_SIDE_STYLE('',(#281067)); +#281067 = SURFACE_STYLE_FILL_AREA(#281068); +#281068 = FILL_AREA_STYLE('',(#281069)); +#281069 = FILL_AREA_STYLE_COLOUR('',#280691); +#281070 = OVER_RIDING_STYLED_ITEM('overriding color',(#281071),#76588, + #281033); +#281071 = PRESENTATION_STYLE_ASSIGNMENT((#281072)); +#281072 = SURFACE_STYLE_USAGE(.BOTH.,#281073); +#281073 = SURFACE_SIDE_STYLE('',(#281074)); +#281074 = SURFACE_STYLE_FILL_AREA(#281075); +#281075 = FILL_AREA_STYLE('',(#281076)); +#281076 = FILL_AREA_STYLE_COLOUR('',#280691); +#281077 = OVER_RIDING_STYLED_ITEM('overriding color',(#281078),#76600, + #281033); +#281078 = PRESENTATION_STYLE_ASSIGNMENT((#281079)); +#281079 = SURFACE_STYLE_USAGE(.BOTH.,#281080); +#281080 = SURFACE_SIDE_STYLE('',(#281081)); +#281081 = SURFACE_STYLE_FILL_AREA(#281082); +#281082 = FILL_AREA_STYLE('',(#281083)); +#281083 = FILL_AREA_STYLE_COLOUR('',#280691); +#281084 = STYLED_ITEM('color',(#281085),#76612); +#281085 = PRESENTATION_STYLE_ASSIGNMENT((#281086,#281091)); +#281086 = SURFACE_STYLE_USAGE(.BOTH.,#281087); +#281087 = SURFACE_SIDE_STYLE('',(#281088)); +#281088 = SURFACE_STYLE_FILL_AREA(#281089); +#281089 = FILL_AREA_STYLE('',(#281090)); +#281090 = FILL_AREA_STYLE_COLOUR('',#278623); +#281091 = CURVE_STYLE('',#281092,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281093 = OVER_RIDING_STYLED_ITEM('overriding color',(#281094),#76614, + #281084); +#281094 = PRESENTATION_STYLE_ASSIGNMENT((#281095)); +#281095 = SURFACE_STYLE_USAGE(.BOTH.,#281096); +#281096 = SURFACE_SIDE_STYLE('',(#281097)); +#281097 = SURFACE_STYLE_FILL_AREA(#281098); +#281098 = FILL_AREA_STYLE('',(#281099)); +#281099 = FILL_AREA_STYLE_COLOUR('',#280691); +#281100 = OVER_RIDING_STYLED_ITEM('overriding color',(#281101),#76654, + #281084); +#281101 = PRESENTATION_STYLE_ASSIGNMENT((#281102)); +#281102 = SURFACE_STYLE_USAGE(.BOTH.,#281103); +#281103 = SURFACE_SIDE_STYLE('',(#281104)); +#281104 = SURFACE_STYLE_FILL_AREA(#281105); +#281105 = FILL_AREA_STYLE('',(#281106)); +#281106 = FILL_AREA_STYLE_COLOUR('',#280691); +#281107 = OVER_RIDING_STYLED_ITEM('overriding color',(#281108),#76685, + #281084); +#281108 = PRESENTATION_STYLE_ASSIGNMENT((#281109)); +#281109 = SURFACE_STYLE_USAGE(.BOTH.,#281110); +#281110 = SURFACE_SIDE_STYLE('',(#281111)); +#281111 = SURFACE_STYLE_FILL_AREA(#281112); +#281112 = FILL_AREA_STYLE('',(#281113)); +#281113 = FILL_AREA_STYLE_COLOUR('',#280691); +#281114 = OVER_RIDING_STYLED_ITEM('overriding color',(#281115),#76716, + #281084); +#281115 = PRESENTATION_STYLE_ASSIGNMENT((#281116)); +#281116 = SURFACE_STYLE_USAGE(.BOTH.,#281117); +#281117 = SURFACE_SIDE_STYLE('',(#281118)); +#281118 = SURFACE_STYLE_FILL_AREA(#281119); +#281119 = FILL_AREA_STYLE('',(#281120)); +#281120 = FILL_AREA_STYLE_COLOUR('',#280691); +#281121 = OVER_RIDING_STYLED_ITEM('overriding color',(#281122),#76738, + #281084); +#281122 = PRESENTATION_STYLE_ASSIGNMENT((#281123)); +#281123 = SURFACE_STYLE_USAGE(.BOTH.,#281124); +#281124 = SURFACE_SIDE_STYLE('',(#281125)); +#281125 = SURFACE_STYLE_FILL_AREA(#281126); +#281126 = FILL_AREA_STYLE('',(#281127)); +#281127 = FILL_AREA_STYLE_COLOUR('',#280691); +#281128 = OVER_RIDING_STYLED_ITEM('overriding color',(#281129),#76750, + #281084); +#281129 = PRESENTATION_STYLE_ASSIGNMENT((#281130)); +#281130 = SURFACE_STYLE_USAGE(.BOTH.,#281131); +#281131 = SURFACE_SIDE_STYLE('',(#281132)); +#281132 = SURFACE_STYLE_FILL_AREA(#281133); +#281133 = FILL_AREA_STYLE('',(#281134)); +#281134 = FILL_AREA_STYLE_COLOUR('',#280691); +#281135 = STYLED_ITEM('color',(#281136),#76762); +#281136 = PRESENTATION_STYLE_ASSIGNMENT((#281137,#281142)); +#281137 = SURFACE_STYLE_USAGE(.BOTH.,#281138); +#281138 = SURFACE_SIDE_STYLE('',(#281139)); +#281139 = SURFACE_STYLE_FILL_AREA(#281140); +#281140 = FILL_AREA_STYLE('',(#281141)); +#281141 = FILL_AREA_STYLE_COLOUR('',#278623); +#281142 = CURVE_STYLE('',#281143,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281143 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281144 = OVER_RIDING_STYLED_ITEM('overriding color',(#281145),#76764, + #281135); +#281145 = PRESENTATION_STYLE_ASSIGNMENT((#281146)); +#281146 = SURFACE_STYLE_USAGE(.BOTH.,#281147); +#281147 = SURFACE_SIDE_STYLE('',(#281148)); +#281148 = SURFACE_STYLE_FILL_AREA(#281149); +#281149 = FILL_AREA_STYLE('',(#281150)); +#281150 = FILL_AREA_STYLE_COLOUR('',#280691); +#281151 = OVER_RIDING_STYLED_ITEM('overriding color',(#281152),#76804, + #281135); +#281152 = PRESENTATION_STYLE_ASSIGNMENT((#281153)); +#281153 = SURFACE_STYLE_USAGE(.BOTH.,#281154); +#281154 = SURFACE_SIDE_STYLE('',(#281155)); +#281155 = SURFACE_STYLE_FILL_AREA(#281156); +#281156 = FILL_AREA_STYLE('',(#281157)); +#281157 = FILL_AREA_STYLE_COLOUR('',#280691); +#281158 = OVER_RIDING_STYLED_ITEM('overriding color',(#281159),#76835, + #281135); +#281159 = PRESENTATION_STYLE_ASSIGNMENT((#281160)); +#281160 = SURFACE_STYLE_USAGE(.BOTH.,#281161); +#281161 = SURFACE_SIDE_STYLE('',(#281162)); +#281162 = SURFACE_STYLE_FILL_AREA(#281163); +#281163 = FILL_AREA_STYLE('',(#281164)); +#281164 = FILL_AREA_STYLE_COLOUR('',#280691); +#281165 = OVER_RIDING_STYLED_ITEM('overriding color',(#281166),#76866, + #281135); +#281166 = PRESENTATION_STYLE_ASSIGNMENT((#281167)); +#281167 = SURFACE_STYLE_USAGE(.BOTH.,#281168); +#281168 = SURFACE_SIDE_STYLE('',(#281169)); +#281169 = SURFACE_STYLE_FILL_AREA(#281170); +#281170 = FILL_AREA_STYLE('',(#281171)); +#281171 = FILL_AREA_STYLE_COLOUR('',#280691); +#281172 = OVER_RIDING_STYLED_ITEM('overriding color',(#281173),#76888, + #281135); +#281173 = PRESENTATION_STYLE_ASSIGNMENT((#281174)); +#281174 = SURFACE_STYLE_USAGE(.BOTH.,#281175); +#281175 = SURFACE_SIDE_STYLE('',(#281176)); +#281176 = SURFACE_STYLE_FILL_AREA(#281177); +#281177 = FILL_AREA_STYLE('',(#281178)); +#281178 = FILL_AREA_STYLE_COLOUR('',#280691); +#281179 = OVER_RIDING_STYLED_ITEM('overriding color',(#281180),#76900, + #281135); +#281180 = PRESENTATION_STYLE_ASSIGNMENT((#281181)); +#281181 = SURFACE_STYLE_USAGE(.BOTH.,#281182); +#281182 = SURFACE_SIDE_STYLE('',(#281183)); +#281183 = SURFACE_STYLE_FILL_AREA(#281184); +#281184 = FILL_AREA_STYLE('',(#281185)); +#281185 = FILL_AREA_STYLE_COLOUR('',#280691); +#281186 = STYLED_ITEM('color',(#281187),#76912); +#281187 = PRESENTATION_STYLE_ASSIGNMENT((#281188,#281193)); +#281188 = SURFACE_STYLE_USAGE(.BOTH.,#281189); +#281189 = SURFACE_SIDE_STYLE('',(#281190)); +#281190 = SURFACE_STYLE_FILL_AREA(#281191); +#281191 = FILL_AREA_STYLE('',(#281192)); +#281192 = FILL_AREA_STYLE_COLOUR('',#278623); +#281193 = CURVE_STYLE('',#281194,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281194 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281195 = OVER_RIDING_STYLED_ITEM('overriding color',(#281196),#76914, + #281186); +#281196 = PRESENTATION_STYLE_ASSIGNMENT((#281197)); +#281197 = SURFACE_STYLE_USAGE(.BOTH.,#281198); +#281198 = SURFACE_SIDE_STYLE('',(#281199)); +#281199 = SURFACE_STYLE_FILL_AREA(#281200); +#281200 = FILL_AREA_STYLE('',(#281201)); +#281201 = FILL_AREA_STYLE_COLOUR('',#280691); +#281202 = OVER_RIDING_STYLED_ITEM('overriding color',(#281203),#76954, + #281186); +#281203 = PRESENTATION_STYLE_ASSIGNMENT((#281204)); +#281204 = SURFACE_STYLE_USAGE(.BOTH.,#281205); +#281205 = SURFACE_SIDE_STYLE('',(#281206)); +#281206 = SURFACE_STYLE_FILL_AREA(#281207); +#281207 = FILL_AREA_STYLE('',(#281208)); +#281208 = FILL_AREA_STYLE_COLOUR('',#280691); +#281209 = OVER_RIDING_STYLED_ITEM('overriding color',(#281210),#76985, + #281186); +#281210 = PRESENTATION_STYLE_ASSIGNMENT((#281211)); +#281211 = SURFACE_STYLE_USAGE(.BOTH.,#281212); +#281212 = SURFACE_SIDE_STYLE('',(#281213)); +#281213 = SURFACE_STYLE_FILL_AREA(#281214); +#281214 = FILL_AREA_STYLE('',(#281215)); +#281215 = FILL_AREA_STYLE_COLOUR('',#280691); +#281216 = OVER_RIDING_STYLED_ITEM('overriding color',(#281217),#77016, + #281186); +#281217 = PRESENTATION_STYLE_ASSIGNMENT((#281218)); +#281218 = SURFACE_STYLE_USAGE(.BOTH.,#281219); +#281219 = SURFACE_SIDE_STYLE('',(#281220)); +#281220 = SURFACE_STYLE_FILL_AREA(#281221); +#281221 = FILL_AREA_STYLE('',(#281222)); +#281222 = FILL_AREA_STYLE_COLOUR('',#280691); +#281223 = OVER_RIDING_STYLED_ITEM('overriding color',(#281224),#77038, + #281186); +#281224 = PRESENTATION_STYLE_ASSIGNMENT((#281225)); +#281225 = SURFACE_STYLE_USAGE(.BOTH.,#281226); +#281226 = SURFACE_SIDE_STYLE('',(#281227)); +#281227 = SURFACE_STYLE_FILL_AREA(#281228); +#281228 = FILL_AREA_STYLE('',(#281229)); +#281229 = FILL_AREA_STYLE_COLOUR('',#280691); +#281230 = OVER_RIDING_STYLED_ITEM('overriding color',(#281231),#77050, + #281186); +#281231 = PRESENTATION_STYLE_ASSIGNMENT((#281232)); +#281232 = SURFACE_STYLE_USAGE(.BOTH.,#281233); +#281233 = SURFACE_SIDE_STYLE('',(#281234)); +#281234 = SURFACE_STYLE_FILL_AREA(#281235); +#281235 = FILL_AREA_STYLE('',(#281236)); +#281236 = FILL_AREA_STYLE_COLOUR('',#280691); +#281237 = STYLED_ITEM('color',(#281238),#77062); +#281238 = PRESENTATION_STYLE_ASSIGNMENT((#281239,#281244)); +#281239 = SURFACE_STYLE_USAGE(.BOTH.,#281240); +#281240 = SURFACE_SIDE_STYLE('',(#281241)); +#281241 = SURFACE_STYLE_FILL_AREA(#281242); +#281242 = FILL_AREA_STYLE('',(#281243)); +#281243 = FILL_AREA_STYLE_COLOUR('',#278623); +#281244 = CURVE_STYLE('',#281245,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281246 = OVER_RIDING_STYLED_ITEM('overriding color',(#281247),#77064, + #281237); +#281247 = PRESENTATION_STYLE_ASSIGNMENT((#281248)); +#281248 = SURFACE_STYLE_USAGE(.BOTH.,#281249); +#281249 = SURFACE_SIDE_STYLE('',(#281250)); +#281250 = SURFACE_STYLE_FILL_AREA(#281251); +#281251 = FILL_AREA_STYLE('',(#281252)); +#281252 = FILL_AREA_STYLE_COLOUR('',#280691); +#281253 = OVER_RIDING_STYLED_ITEM('overriding color',(#281254),#77104, + #281237); +#281254 = PRESENTATION_STYLE_ASSIGNMENT((#281255)); +#281255 = SURFACE_STYLE_USAGE(.BOTH.,#281256); +#281256 = SURFACE_SIDE_STYLE('',(#281257)); +#281257 = SURFACE_STYLE_FILL_AREA(#281258); +#281258 = FILL_AREA_STYLE('',(#281259)); +#281259 = FILL_AREA_STYLE_COLOUR('',#280691); +#281260 = OVER_RIDING_STYLED_ITEM('overriding color',(#281261),#77135, + #281237); +#281261 = PRESENTATION_STYLE_ASSIGNMENT((#281262)); +#281262 = SURFACE_STYLE_USAGE(.BOTH.,#281263); +#281263 = SURFACE_SIDE_STYLE('',(#281264)); +#281264 = SURFACE_STYLE_FILL_AREA(#281265); +#281265 = FILL_AREA_STYLE('',(#281266)); +#281266 = FILL_AREA_STYLE_COLOUR('',#280691); +#281267 = OVER_RIDING_STYLED_ITEM('overriding color',(#281268),#77166, + #281237); +#281268 = PRESENTATION_STYLE_ASSIGNMENT((#281269)); +#281269 = SURFACE_STYLE_USAGE(.BOTH.,#281270); +#281270 = SURFACE_SIDE_STYLE('',(#281271)); +#281271 = SURFACE_STYLE_FILL_AREA(#281272); +#281272 = FILL_AREA_STYLE('',(#281273)); +#281273 = FILL_AREA_STYLE_COLOUR('',#280691); +#281274 = OVER_RIDING_STYLED_ITEM('overriding color',(#281275),#77188, + #281237); +#281275 = PRESENTATION_STYLE_ASSIGNMENT((#281276)); +#281276 = SURFACE_STYLE_USAGE(.BOTH.,#281277); +#281277 = SURFACE_SIDE_STYLE('',(#281278)); +#281278 = SURFACE_STYLE_FILL_AREA(#281279); +#281279 = FILL_AREA_STYLE('',(#281280)); +#281280 = FILL_AREA_STYLE_COLOUR('',#280691); +#281281 = OVER_RIDING_STYLED_ITEM('overriding color',(#281282),#77200, + #281237); +#281282 = PRESENTATION_STYLE_ASSIGNMENT((#281283)); +#281283 = SURFACE_STYLE_USAGE(.BOTH.,#281284); +#281284 = SURFACE_SIDE_STYLE('',(#281285)); +#281285 = SURFACE_STYLE_FILL_AREA(#281286); +#281286 = FILL_AREA_STYLE('',(#281287)); +#281287 = FILL_AREA_STYLE_COLOUR('',#280691); +#281288 = STYLED_ITEM('color',(#281289),#77212); +#281289 = PRESENTATION_STYLE_ASSIGNMENT((#281290,#281295)); +#281290 = SURFACE_STYLE_USAGE(.BOTH.,#281291); +#281291 = SURFACE_SIDE_STYLE('',(#281292)); +#281292 = SURFACE_STYLE_FILL_AREA(#281293); +#281293 = FILL_AREA_STYLE('',(#281294)); +#281294 = FILL_AREA_STYLE_COLOUR('',#278623); +#281295 = CURVE_STYLE('',#281296,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281296 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281297 = OVER_RIDING_STYLED_ITEM('overriding color',(#281298),#77214, + #281288); +#281298 = PRESENTATION_STYLE_ASSIGNMENT((#281299)); +#281299 = SURFACE_STYLE_USAGE(.BOTH.,#281300); +#281300 = SURFACE_SIDE_STYLE('',(#281301)); +#281301 = SURFACE_STYLE_FILL_AREA(#281302); +#281302 = FILL_AREA_STYLE('',(#281303)); +#281303 = FILL_AREA_STYLE_COLOUR('',#280691); +#281304 = OVER_RIDING_STYLED_ITEM('overriding color',(#281305),#77254, + #281288); +#281305 = PRESENTATION_STYLE_ASSIGNMENT((#281306)); +#281306 = SURFACE_STYLE_USAGE(.BOTH.,#281307); +#281307 = SURFACE_SIDE_STYLE('',(#281308)); +#281308 = SURFACE_STYLE_FILL_AREA(#281309); +#281309 = FILL_AREA_STYLE('',(#281310)); +#281310 = FILL_AREA_STYLE_COLOUR('',#280691); +#281311 = OVER_RIDING_STYLED_ITEM('overriding color',(#281312),#77285, + #281288); +#281312 = PRESENTATION_STYLE_ASSIGNMENT((#281313)); +#281313 = SURFACE_STYLE_USAGE(.BOTH.,#281314); +#281314 = SURFACE_SIDE_STYLE('',(#281315)); +#281315 = SURFACE_STYLE_FILL_AREA(#281316); +#281316 = FILL_AREA_STYLE('',(#281317)); +#281317 = FILL_AREA_STYLE_COLOUR('',#280691); +#281318 = OVER_RIDING_STYLED_ITEM('overriding color',(#281319),#77316, + #281288); +#281319 = PRESENTATION_STYLE_ASSIGNMENT((#281320)); +#281320 = SURFACE_STYLE_USAGE(.BOTH.,#281321); +#281321 = SURFACE_SIDE_STYLE('',(#281322)); +#281322 = SURFACE_STYLE_FILL_AREA(#281323); +#281323 = FILL_AREA_STYLE('',(#281324)); +#281324 = FILL_AREA_STYLE_COLOUR('',#280691); +#281325 = OVER_RIDING_STYLED_ITEM('overriding color',(#281326),#77338, + #281288); +#281326 = PRESENTATION_STYLE_ASSIGNMENT((#281327)); +#281327 = SURFACE_STYLE_USAGE(.BOTH.,#281328); +#281328 = SURFACE_SIDE_STYLE('',(#281329)); +#281329 = SURFACE_STYLE_FILL_AREA(#281330); +#281330 = FILL_AREA_STYLE('',(#281331)); +#281331 = FILL_AREA_STYLE_COLOUR('',#280691); +#281332 = OVER_RIDING_STYLED_ITEM('overriding color',(#281333),#77350, + #281288); +#281333 = PRESENTATION_STYLE_ASSIGNMENT((#281334)); +#281334 = SURFACE_STYLE_USAGE(.BOTH.,#281335); +#281335 = SURFACE_SIDE_STYLE('',(#281336)); +#281336 = SURFACE_STYLE_FILL_AREA(#281337); +#281337 = FILL_AREA_STYLE('',(#281338)); +#281338 = FILL_AREA_STYLE_COLOUR('',#280691); +#281339 = STYLED_ITEM('color',(#281340),#77362); +#281340 = PRESENTATION_STYLE_ASSIGNMENT((#281341,#281346)); +#281341 = SURFACE_STYLE_USAGE(.BOTH.,#281342); +#281342 = SURFACE_SIDE_STYLE('',(#281343)); +#281343 = SURFACE_STYLE_FILL_AREA(#281344); +#281344 = FILL_AREA_STYLE('',(#281345)); +#281345 = FILL_AREA_STYLE_COLOUR('',#278623); +#281346 = CURVE_STYLE('',#281347,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281347 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281348 = OVER_RIDING_STYLED_ITEM('overriding color',(#281349),#77364, + #281339); +#281349 = PRESENTATION_STYLE_ASSIGNMENT((#281350)); +#281350 = SURFACE_STYLE_USAGE(.BOTH.,#281351); +#281351 = SURFACE_SIDE_STYLE('',(#281352)); +#281352 = SURFACE_STYLE_FILL_AREA(#281353); +#281353 = FILL_AREA_STYLE('',(#281354)); +#281354 = FILL_AREA_STYLE_COLOUR('',#280691); +#281355 = OVER_RIDING_STYLED_ITEM('overriding color',(#281356),#77404, + #281339); +#281356 = PRESENTATION_STYLE_ASSIGNMENT((#281357)); +#281357 = SURFACE_STYLE_USAGE(.BOTH.,#281358); +#281358 = SURFACE_SIDE_STYLE('',(#281359)); +#281359 = SURFACE_STYLE_FILL_AREA(#281360); +#281360 = FILL_AREA_STYLE('',(#281361)); +#281361 = FILL_AREA_STYLE_COLOUR('',#280691); +#281362 = OVER_RIDING_STYLED_ITEM('overriding color',(#281363),#77435, + #281339); +#281363 = PRESENTATION_STYLE_ASSIGNMENT((#281364)); +#281364 = SURFACE_STYLE_USAGE(.BOTH.,#281365); +#281365 = SURFACE_SIDE_STYLE('',(#281366)); +#281366 = SURFACE_STYLE_FILL_AREA(#281367); +#281367 = FILL_AREA_STYLE('',(#281368)); +#281368 = FILL_AREA_STYLE_COLOUR('',#280691); +#281369 = OVER_RIDING_STYLED_ITEM('overriding color',(#281370),#77466, + #281339); +#281370 = PRESENTATION_STYLE_ASSIGNMENT((#281371)); +#281371 = SURFACE_STYLE_USAGE(.BOTH.,#281372); +#281372 = SURFACE_SIDE_STYLE('',(#281373)); +#281373 = SURFACE_STYLE_FILL_AREA(#281374); +#281374 = FILL_AREA_STYLE('',(#281375)); +#281375 = FILL_AREA_STYLE_COLOUR('',#280691); +#281376 = OVER_RIDING_STYLED_ITEM('overriding color',(#281377),#77488, + #281339); +#281377 = PRESENTATION_STYLE_ASSIGNMENT((#281378)); +#281378 = SURFACE_STYLE_USAGE(.BOTH.,#281379); +#281379 = SURFACE_SIDE_STYLE('',(#281380)); +#281380 = SURFACE_STYLE_FILL_AREA(#281381); +#281381 = FILL_AREA_STYLE('',(#281382)); +#281382 = FILL_AREA_STYLE_COLOUR('',#280691); +#281383 = OVER_RIDING_STYLED_ITEM('overriding color',(#281384),#77500, + #281339); +#281384 = PRESENTATION_STYLE_ASSIGNMENT((#281385)); +#281385 = SURFACE_STYLE_USAGE(.BOTH.,#281386); +#281386 = SURFACE_SIDE_STYLE('',(#281387)); +#281387 = SURFACE_STYLE_FILL_AREA(#281388); +#281388 = FILL_AREA_STYLE('',(#281389)); +#281389 = FILL_AREA_STYLE_COLOUR('',#280691); +#281390 = STYLED_ITEM('color',(#281391),#77512); +#281391 = PRESENTATION_STYLE_ASSIGNMENT((#281392,#281397)); +#281392 = SURFACE_STYLE_USAGE(.BOTH.,#281393); +#281393 = SURFACE_SIDE_STYLE('',(#281394)); +#281394 = SURFACE_STYLE_FILL_AREA(#281395); +#281395 = FILL_AREA_STYLE('',(#281396)); +#281396 = FILL_AREA_STYLE_COLOUR('',#278623); +#281397 = CURVE_STYLE('',#281398,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281399 = OVER_RIDING_STYLED_ITEM('overriding color',(#281400),#77514, + #281390); +#281400 = PRESENTATION_STYLE_ASSIGNMENT((#281401)); +#281401 = SURFACE_STYLE_USAGE(.BOTH.,#281402); +#281402 = SURFACE_SIDE_STYLE('',(#281403)); +#281403 = SURFACE_STYLE_FILL_AREA(#281404); +#281404 = FILL_AREA_STYLE('',(#281405)); +#281405 = FILL_AREA_STYLE_COLOUR('',#280691); +#281406 = OVER_RIDING_STYLED_ITEM('overriding color',(#281407),#77554, + #281390); +#281407 = PRESENTATION_STYLE_ASSIGNMENT((#281408)); +#281408 = SURFACE_STYLE_USAGE(.BOTH.,#281409); +#281409 = SURFACE_SIDE_STYLE('',(#281410)); +#281410 = SURFACE_STYLE_FILL_AREA(#281411); +#281411 = FILL_AREA_STYLE('',(#281412)); +#281412 = FILL_AREA_STYLE_COLOUR('',#280691); +#281413 = OVER_RIDING_STYLED_ITEM('overriding color',(#281414),#77585, + #281390); +#281414 = PRESENTATION_STYLE_ASSIGNMENT((#281415)); +#281415 = SURFACE_STYLE_USAGE(.BOTH.,#281416); +#281416 = SURFACE_SIDE_STYLE('',(#281417)); +#281417 = SURFACE_STYLE_FILL_AREA(#281418); +#281418 = FILL_AREA_STYLE('',(#281419)); +#281419 = FILL_AREA_STYLE_COLOUR('',#280691); +#281420 = OVER_RIDING_STYLED_ITEM('overriding color',(#281421),#77616, + #281390); +#281421 = PRESENTATION_STYLE_ASSIGNMENT((#281422)); +#281422 = SURFACE_STYLE_USAGE(.BOTH.,#281423); +#281423 = SURFACE_SIDE_STYLE('',(#281424)); +#281424 = SURFACE_STYLE_FILL_AREA(#281425); +#281425 = FILL_AREA_STYLE('',(#281426)); +#281426 = FILL_AREA_STYLE_COLOUR('',#280691); +#281427 = OVER_RIDING_STYLED_ITEM('overriding color',(#281428),#77638, + #281390); +#281428 = PRESENTATION_STYLE_ASSIGNMENT((#281429)); +#281429 = SURFACE_STYLE_USAGE(.BOTH.,#281430); +#281430 = SURFACE_SIDE_STYLE('',(#281431)); +#281431 = SURFACE_STYLE_FILL_AREA(#281432); +#281432 = FILL_AREA_STYLE('',(#281433)); +#281433 = FILL_AREA_STYLE_COLOUR('',#280691); +#281434 = OVER_RIDING_STYLED_ITEM('overriding color',(#281435),#77650, + #281390); +#281435 = PRESENTATION_STYLE_ASSIGNMENT((#281436)); +#281436 = SURFACE_STYLE_USAGE(.BOTH.,#281437); +#281437 = SURFACE_SIDE_STYLE('',(#281438)); +#281438 = SURFACE_STYLE_FILL_AREA(#281439); +#281439 = FILL_AREA_STYLE('',(#281440)); +#281440 = FILL_AREA_STYLE_COLOUR('',#280691); +#281441 = STYLED_ITEM('color',(#281442),#77662); +#281442 = PRESENTATION_STYLE_ASSIGNMENT((#281443,#281448)); +#281443 = SURFACE_STYLE_USAGE(.BOTH.,#281444); +#281444 = SURFACE_SIDE_STYLE('',(#281445)); +#281445 = SURFACE_STYLE_FILL_AREA(#281446); +#281446 = FILL_AREA_STYLE('',(#281447)); +#281447 = FILL_AREA_STYLE_COLOUR('',#278623); +#281448 = CURVE_STYLE('',#281449,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281450 = OVER_RIDING_STYLED_ITEM('overriding color',(#281451),#77664, + #281441); +#281451 = PRESENTATION_STYLE_ASSIGNMENT((#281452)); +#281452 = SURFACE_STYLE_USAGE(.BOTH.,#281453); +#281453 = SURFACE_SIDE_STYLE('',(#281454)); +#281454 = SURFACE_STYLE_FILL_AREA(#281455); +#281455 = FILL_AREA_STYLE('',(#281456)); +#281456 = FILL_AREA_STYLE_COLOUR('',#280691); +#281457 = OVER_RIDING_STYLED_ITEM('overriding color',(#281458),#77704, + #281441); +#281458 = PRESENTATION_STYLE_ASSIGNMENT((#281459)); +#281459 = SURFACE_STYLE_USAGE(.BOTH.,#281460); +#281460 = SURFACE_SIDE_STYLE('',(#281461)); +#281461 = SURFACE_STYLE_FILL_AREA(#281462); +#281462 = FILL_AREA_STYLE('',(#281463)); +#281463 = FILL_AREA_STYLE_COLOUR('',#280691); +#281464 = OVER_RIDING_STYLED_ITEM('overriding color',(#281465),#77735, + #281441); +#281465 = PRESENTATION_STYLE_ASSIGNMENT((#281466)); +#281466 = SURFACE_STYLE_USAGE(.BOTH.,#281467); +#281467 = SURFACE_SIDE_STYLE('',(#281468)); +#281468 = SURFACE_STYLE_FILL_AREA(#281469); +#281469 = FILL_AREA_STYLE('',(#281470)); +#281470 = FILL_AREA_STYLE_COLOUR('',#280691); +#281471 = OVER_RIDING_STYLED_ITEM('overriding color',(#281472),#77766, + #281441); +#281472 = PRESENTATION_STYLE_ASSIGNMENT((#281473)); +#281473 = SURFACE_STYLE_USAGE(.BOTH.,#281474); +#281474 = SURFACE_SIDE_STYLE('',(#281475)); +#281475 = SURFACE_STYLE_FILL_AREA(#281476); +#281476 = FILL_AREA_STYLE('',(#281477)); +#281477 = FILL_AREA_STYLE_COLOUR('',#280691); +#281478 = OVER_RIDING_STYLED_ITEM('overriding color',(#281479),#77788, + #281441); +#281479 = PRESENTATION_STYLE_ASSIGNMENT((#281480)); +#281480 = SURFACE_STYLE_USAGE(.BOTH.,#281481); +#281481 = SURFACE_SIDE_STYLE('',(#281482)); +#281482 = SURFACE_STYLE_FILL_AREA(#281483); +#281483 = FILL_AREA_STYLE('',(#281484)); +#281484 = FILL_AREA_STYLE_COLOUR('',#280691); +#281485 = OVER_RIDING_STYLED_ITEM('overriding color',(#281486),#77800, + #281441); +#281486 = PRESENTATION_STYLE_ASSIGNMENT((#281487)); +#281487 = SURFACE_STYLE_USAGE(.BOTH.,#281488); +#281488 = SURFACE_SIDE_STYLE('',(#281489)); +#281489 = SURFACE_STYLE_FILL_AREA(#281490); +#281490 = FILL_AREA_STYLE('',(#281491)); +#281491 = FILL_AREA_STYLE_COLOUR('',#280691); +#281492 = STYLED_ITEM('color',(#281493),#77812); +#281493 = PRESENTATION_STYLE_ASSIGNMENT((#281494,#281499)); +#281494 = SURFACE_STYLE_USAGE(.BOTH.,#281495); +#281495 = SURFACE_SIDE_STYLE('',(#281496)); +#281496 = SURFACE_STYLE_FILL_AREA(#281497); +#281497 = FILL_AREA_STYLE('',(#281498)); +#281498 = FILL_AREA_STYLE_COLOUR('',#278623); +#281499 = CURVE_STYLE('',#281500,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281500 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281501 = OVER_RIDING_STYLED_ITEM('overriding color',(#281502),#77814, + #281492); +#281502 = PRESENTATION_STYLE_ASSIGNMENT((#281503)); +#281503 = SURFACE_STYLE_USAGE(.BOTH.,#281504); +#281504 = SURFACE_SIDE_STYLE('',(#281505)); +#281505 = SURFACE_STYLE_FILL_AREA(#281506); +#281506 = FILL_AREA_STYLE('',(#281507)); +#281507 = FILL_AREA_STYLE_COLOUR('',#280691); +#281508 = OVER_RIDING_STYLED_ITEM('overriding color',(#281509),#77870, + #281492); +#281509 = PRESENTATION_STYLE_ASSIGNMENT((#281510)); +#281510 = SURFACE_STYLE_USAGE(.BOTH.,#281511); +#281511 = SURFACE_SIDE_STYLE('',(#281512)); +#281512 = SURFACE_STYLE_FILL_AREA(#281513); +#281513 = FILL_AREA_STYLE('',(#281514)); +#281514 = FILL_AREA_STYLE_COLOUR('',#280691); +#281515 = OVER_RIDING_STYLED_ITEM('overriding color',(#281516),#77901, + #281492); +#281516 = PRESENTATION_STYLE_ASSIGNMENT((#281517)); +#281517 = SURFACE_STYLE_USAGE(.BOTH.,#281518); +#281518 = SURFACE_SIDE_STYLE('',(#281519)); +#281519 = SURFACE_STYLE_FILL_AREA(#281520); +#281520 = FILL_AREA_STYLE('',(#281521)); +#281521 = FILL_AREA_STYLE_COLOUR('',#280691); +#281522 = OVER_RIDING_STYLED_ITEM('overriding color',(#281523),#77925, + #281492); +#281523 = PRESENTATION_STYLE_ASSIGNMENT((#281524)); +#281524 = SURFACE_STYLE_USAGE(.BOTH.,#281525); +#281525 = SURFACE_SIDE_STYLE('',(#281526)); +#281526 = SURFACE_STYLE_FILL_AREA(#281527); +#281527 = FILL_AREA_STYLE('',(#281528)); +#281528 = FILL_AREA_STYLE_COLOUR('',#280691); +#281529 = OVER_RIDING_STYLED_ITEM('overriding color',(#281530),#77949, + #281492); +#281530 = PRESENTATION_STYLE_ASSIGNMENT((#281531)); +#281531 = SURFACE_STYLE_USAGE(.BOTH.,#281532); +#281532 = SURFACE_SIDE_STYLE('',(#281533)); +#281533 = SURFACE_STYLE_FILL_AREA(#281534); +#281534 = FILL_AREA_STYLE('',(#281535)); +#281535 = FILL_AREA_STYLE_COLOUR('',#280691); +#281536 = OVER_RIDING_STYLED_ITEM('overriding color',(#281537),#77973, + #281492); +#281537 = PRESENTATION_STYLE_ASSIGNMENT((#281538)); +#281538 = SURFACE_STYLE_USAGE(.BOTH.,#281539); +#281539 = SURFACE_SIDE_STYLE('',(#281540)); +#281540 = SURFACE_STYLE_FILL_AREA(#281541); +#281541 = FILL_AREA_STYLE('',(#281542)); +#281542 = FILL_AREA_STYLE_COLOUR('',#280691); +#281543 = OVER_RIDING_STYLED_ITEM('overriding color',(#281544),#77997, + #281492); +#281544 = PRESENTATION_STYLE_ASSIGNMENT((#281545)); +#281545 = SURFACE_STYLE_USAGE(.BOTH.,#281546); +#281546 = SURFACE_SIDE_STYLE('',(#281547)); +#281547 = SURFACE_STYLE_FILL_AREA(#281548); +#281548 = FILL_AREA_STYLE('',(#281549)); +#281549 = FILL_AREA_STYLE_COLOUR('',#280691); +#281550 = OVER_RIDING_STYLED_ITEM('overriding color',(#281551),#78014, + #281492); +#281551 = PRESENTATION_STYLE_ASSIGNMENT((#281552)); +#281552 = SURFACE_STYLE_USAGE(.BOTH.,#281553); +#281553 = SURFACE_SIDE_STYLE('',(#281554)); +#281554 = SURFACE_STYLE_FILL_AREA(#281555); +#281555 = FILL_AREA_STYLE('',(#281556)); +#281556 = FILL_AREA_STYLE_COLOUR('',#280691); +#281557 = STYLED_ITEM('color',(#281558),#78028); +#281558 = PRESENTATION_STYLE_ASSIGNMENT((#281559,#281564)); +#281559 = SURFACE_STYLE_USAGE(.BOTH.,#281560); +#281560 = SURFACE_SIDE_STYLE('',(#281561)); +#281561 = SURFACE_STYLE_FILL_AREA(#281562); +#281562 = FILL_AREA_STYLE('',(#281563)); +#281563 = FILL_AREA_STYLE_COLOUR('',#278623); +#281564 = CURVE_STYLE('',#281565,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281566 = OVER_RIDING_STYLED_ITEM('overriding color',(#281567),#78030, + #281557); +#281567 = PRESENTATION_STYLE_ASSIGNMENT((#281568)); +#281568 = SURFACE_STYLE_USAGE(.BOTH.,#281569); +#281569 = SURFACE_SIDE_STYLE('',(#281570)); +#281570 = SURFACE_STYLE_FILL_AREA(#281571); +#281571 = FILL_AREA_STYLE('',(#281572)); +#281572 = FILL_AREA_STYLE_COLOUR('',#280691); +#281573 = OVER_RIDING_STYLED_ITEM('overriding color',(#281574),#78086, + #281557); +#281574 = PRESENTATION_STYLE_ASSIGNMENT((#281575)); +#281575 = SURFACE_STYLE_USAGE(.BOTH.,#281576); +#281576 = SURFACE_SIDE_STYLE('',(#281577)); +#281577 = SURFACE_STYLE_FILL_AREA(#281578); +#281578 = FILL_AREA_STYLE('',(#281579)); +#281579 = FILL_AREA_STYLE_COLOUR('',#280691); +#281580 = OVER_RIDING_STYLED_ITEM('overriding color',(#281581),#78117, + #281557); +#281581 = PRESENTATION_STYLE_ASSIGNMENT((#281582)); +#281582 = SURFACE_STYLE_USAGE(.BOTH.,#281583); +#281583 = SURFACE_SIDE_STYLE('',(#281584)); +#281584 = SURFACE_STYLE_FILL_AREA(#281585); +#281585 = FILL_AREA_STYLE('',(#281586)); +#281586 = FILL_AREA_STYLE_COLOUR('',#280691); +#281587 = OVER_RIDING_STYLED_ITEM('overriding color',(#281588),#78141, + #281557); +#281588 = PRESENTATION_STYLE_ASSIGNMENT((#281589)); +#281589 = SURFACE_STYLE_USAGE(.BOTH.,#281590); +#281590 = SURFACE_SIDE_STYLE('',(#281591)); +#281591 = SURFACE_STYLE_FILL_AREA(#281592); +#281592 = FILL_AREA_STYLE('',(#281593)); +#281593 = FILL_AREA_STYLE_COLOUR('',#280691); +#281594 = OVER_RIDING_STYLED_ITEM('overriding color',(#281595),#78165, + #281557); +#281595 = PRESENTATION_STYLE_ASSIGNMENT((#281596)); +#281596 = SURFACE_STYLE_USAGE(.BOTH.,#281597); +#281597 = SURFACE_SIDE_STYLE('',(#281598)); +#281598 = SURFACE_STYLE_FILL_AREA(#281599); +#281599 = FILL_AREA_STYLE('',(#281600)); +#281600 = FILL_AREA_STYLE_COLOUR('',#280691); +#281601 = OVER_RIDING_STYLED_ITEM('overriding color',(#281602),#78189, + #281557); +#281602 = PRESENTATION_STYLE_ASSIGNMENT((#281603)); +#281603 = SURFACE_STYLE_USAGE(.BOTH.,#281604); +#281604 = SURFACE_SIDE_STYLE('',(#281605)); +#281605 = SURFACE_STYLE_FILL_AREA(#281606); +#281606 = FILL_AREA_STYLE('',(#281607)); +#281607 = FILL_AREA_STYLE_COLOUR('',#280691); +#281608 = OVER_RIDING_STYLED_ITEM('overriding color',(#281609),#78213, + #281557); +#281609 = PRESENTATION_STYLE_ASSIGNMENT((#281610)); +#281610 = SURFACE_STYLE_USAGE(.BOTH.,#281611); +#281611 = SURFACE_SIDE_STYLE('',(#281612)); +#281612 = SURFACE_STYLE_FILL_AREA(#281613); +#281613 = FILL_AREA_STYLE('',(#281614)); +#281614 = FILL_AREA_STYLE_COLOUR('',#280691); +#281615 = OVER_RIDING_STYLED_ITEM('overriding color',(#281616),#78230, + #281557); +#281616 = PRESENTATION_STYLE_ASSIGNMENT((#281617)); +#281617 = SURFACE_STYLE_USAGE(.BOTH.,#281618); +#281618 = SURFACE_SIDE_STYLE('',(#281619)); +#281619 = SURFACE_STYLE_FILL_AREA(#281620); +#281620 = FILL_AREA_STYLE('',(#281621)); +#281621 = FILL_AREA_STYLE_COLOUR('',#280691); +#281622 = STYLED_ITEM('color',(#281623),#78244); +#281623 = PRESENTATION_STYLE_ASSIGNMENT((#281624,#281629)); +#281624 = SURFACE_STYLE_USAGE(.BOTH.,#281625); +#281625 = SURFACE_SIDE_STYLE('',(#281626)); +#281626 = SURFACE_STYLE_FILL_AREA(#281627); +#281627 = FILL_AREA_STYLE('',(#281628)); +#281628 = FILL_AREA_STYLE_COLOUR('',#278623); +#281629 = CURVE_STYLE('',#281630,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281630 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281631 = OVER_RIDING_STYLED_ITEM('overriding color',(#281632),#78246, + #281622); +#281632 = PRESENTATION_STYLE_ASSIGNMENT((#281633)); +#281633 = SURFACE_STYLE_USAGE(.BOTH.,#281634); +#281634 = SURFACE_SIDE_STYLE('',(#281635)); +#281635 = SURFACE_STYLE_FILL_AREA(#281636); +#281636 = FILL_AREA_STYLE('',(#281637)); +#281637 = FILL_AREA_STYLE_COLOUR('',#280691); +#281638 = OVER_RIDING_STYLED_ITEM('overriding color',(#281639),#78302, + #281622); +#281639 = PRESENTATION_STYLE_ASSIGNMENT((#281640)); +#281640 = SURFACE_STYLE_USAGE(.BOTH.,#281641); +#281641 = SURFACE_SIDE_STYLE('',(#281642)); +#281642 = SURFACE_STYLE_FILL_AREA(#281643); +#281643 = FILL_AREA_STYLE('',(#281644)); +#281644 = FILL_AREA_STYLE_COLOUR('',#280691); +#281645 = OVER_RIDING_STYLED_ITEM('overriding color',(#281646),#78333, + #281622); +#281646 = PRESENTATION_STYLE_ASSIGNMENT((#281647)); +#281647 = SURFACE_STYLE_USAGE(.BOTH.,#281648); +#281648 = SURFACE_SIDE_STYLE('',(#281649)); +#281649 = SURFACE_STYLE_FILL_AREA(#281650); +#281650 = FILL_AREA_STYLE('',(#281651)); +#281651 = FILL_AREA_STYLE_COLOUR('',#280691); +#281652 = OVER_RIDING_STYLED_ITEM('overriding color',(#281653),#78357, + #281622); +#281653 = PRESENTATION_STYLE_ASSIGNMENT((#281654)); +#281654 = SURFACE_STYLE_USAGE(.BOTH.,#281655); +#281655 = SURFACE_SIDE_STYLE('',(#281656)); +#281656 = SURFACE_STYLE_FILL_AREA(#281657); +#281657 = FILL_AREA_STYLE('',(#281658)); +#281658 = FILL_AREA_STYLE_COLOUR('',#280691); +#281659 = OVER_RIDING_STYLED_ITEM('overriding color',(#281660),#78381, + #281622); +#281660 = PRESENTATION_STYLE_ASSIGNMENT((#281661)); +#281661 = SURFACE_STYLE_USAGE(.BOTH.,#281662); +#281662 = SURFACE_SIDE_STYLE('',(#281663)); +#281663 = SURFACE_STYLE_FILL_AREA(#281664); +#281664 = FILL_AREA_STYLE('',(#281665)); +#281665 = FILL_AREA_STYLE_COLOUR('',#280691); +#281666 = OVER_RIDING_STYLED_ITEM('overriding color',(#281667),#78405, + #281622); +#281667 = PRESENTATION_STYLE_ASSIGNMENT((#281668)); +#281668 = SURFACE_STYLE_USAGE(.BOTH.,#281669); +#281669 = SURFACE_SIDE_STYLE('',(#281670)); +#281670 = SURFACE_STYLE_FILL_AREA(#281671); +#281671 = FILL_AREA_STYLE('',(#281672)); +#281672 = FILL_AREA_STYLE_COLOUR('',#280691); +#281673 = OVER_RIDING_STYLED_ITEM('overriding color',(#281674),#78429, + #281622); +#281674 = PRESENTATION_STYLE_ASSIGNMENT((#281675)); +#281675 = SURFACE_STYLE_USAGE(.BOTH.,#281676); +#281676 = SURFACE_SIDE_STYLE('',(#281677)); +#281677 = SURFACE_STYLE_FILL_AREA(#281678); +#281678 = FILL_AREA_STYLE('',(#281679)); +#281679 = FILL_AREA_STYLE_COLOUR('',#280691); +#281680 = OVER_RIDING_STYLED_ITEM('overriding color',(#281681),#78446, + #281622); +#281681 = PRESENTATION_STYLE_ASSIGNMENT((#281682)); +#281682 = SURFACE_STYLE_USAGE(.BOTH.,#281683); +#281683 = SURFACE_SIDE_STYLE('',(#281684)); +#281684 = SURFACE_STYLE_FILL_AREA(#281685); +#281685 = FILL_AREA_STYLE('',(#281686)); +#281686 = FILL_AREA_STYLE_COLOUR('',#280691); +#281687 = STYLED_ITEM('color',(#281688),#78460); +#281688 = PRESENTATION_STYLE_ASSIGNMENT((#281689,#281694)); +#281689 = SURFACE_STYLE_USAGE(.BOTH.,#281690); +#281690 = SURFACE_SIDE_STYLE('',(#281691)); +#281691 = SURFACE_STYLE_FILL_AREA(#281692); +#281692 = FILL_AREA_STYLE('',(#281693)); +#281693 = FILL_AREA_STYLE_COLOUR('',#278623); +#281694 = CURVE_STYLE('',#281695,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281696 = OVER_RIDING_STYLED_ITEM('overriding color',(#281697),#78462, + #281687); +#281697 = PRESENTATION_STYLE_ASSIGNMENT((#281698)); +#281698 = SURFACE_STYLE_USAGE(.BOTH.,#281699); +#281699 = SURFACE_SIDE_STYLE('',(#281700)); +#281700 = SURFACE_STYLE_FILL_AREA(#281701); +#281701 = FILL_AREA_STYLE('',(#281702)); +#281702 = FILL_AREA_STYLE_COLOUR('',#280691); +#281703 = OVER_RIDING_STYLED_ITEM('overriding color',(#281704),#78518, + #281687); +#281704 = PRESENTATION_STYLE_ASSIGNMENT((#281705)); +#281705 = SURFACE_STYLE_USAGE(.BOTH.,#281706); +#281706 = SURFACE_SIDE_STYLE('',(#281707)); +#281707 = SURFACE_STYLE_FILL_AREA(#281708); +#281708 = FILL_AREA_STYLE('',(#281709)); +#281709 = FILL_AREA_STYLE_COLOUR('',#280691); +#281710 = OVER_RIDING_STYLED_ITEM('overriding color',(#281711),#78549, + #281687); +#281711 = PRESENTATION_STYLE_ASSIGNMENT((#281712)); +#281712 = SURFACE_STYLE_USAGE(.BOTH.,#281713); +#281713 = SURFACE_SIDE_STYLE('',(#281714)); +#281714 = SURFACE_STYLE_FILL_AREA(#281715); +#281715 = FILL_AREA_STYLE('',(#281716)); +#281716 = FILL_AREA_STYLE_COLOUR('',#280691); +#281717 = OVER_RIDING_STYLED_ITEM('overriding color',(#281718),#78573, + #281687); +#281718 = PRESENTATION_STYLE_ASSIGNMENT((#281719)); +#281719 = SURFACE_STYLE_USAGE(.BOTH.,#281720); +#281720 = SURFACE_SIDE_STYLE('',(#281721)); +#281721 = SURFACE_STYLE_FILL_AREA(#281722); +#281722 = FILL_AREA_STYLE('',(#281723)); +#281723 = FILL_AREA_STYLE_COLOUR('',#280691); +#281724 = OVER_RIDING_STYLED_ITEM('overriding color',(#281725),#78597, + #281687); +#281725 = PRESENTATION_STYLE_ASSIGNMENT((#281726)); +#281726 = SURFACE_STYLE_USAGE(.BOTH.,#281727); +#281727 = SURFACE_SIDE_STYLE('',(#281728)); +#281728 = SURFACE_STYLE_FILL_AREA(#281729); +#281729 = FILL_AREA_STYLE('',(#281730)); +#281730 = FILL_AREA_STYLE_COLOUR('',#280691); +#281731 = OVER_RIDING_STYLED_ITEM('overriding color',(#281732),#78621, + #281687); +#281732 = PRESENTATION_STYLE_ASSIGNMENT((#281733)); +#281733 = SURFACE_STYLE_USAGE(.BOTH.,#281734); +#281734 = SURFACE_SIDE_STYLE('',(#281735)); +#281735 = SURFACE_STYLE_FILL_AREA(#281736); +#281736 = FILL_AREA_STYLE('',(#281737)); +#281737 = FILL_AREA_STYLE_COLOUR('',#280691); +#281738 = OVER_RIDING_STYLED_ITEM('overriding color',(#281739),#78645, + #281687); +#281739 = PRESENTATION_STYLE_ASSIGNMENT((#281740)); +#281740 = SURFACE_STYLE_USAGE(.BOTH.,#281741); +#281741 = SURFACE_SIDE_STYLE('',(#281742)); +#281742 = SURFACE_STYLE_FILL_AREA(#281743); +#281743 = FILL_AREA_STYLE('',(#281744)); +#281744 = FILL_AREA_STYLE_COLOUR('',#280691); +#281745 = OVER_RIDING_STYLED_ITEM('overriding color',(#281746),#78662, + #281687); +#281746 = PRESENTATION_STYLE_ASSIGNMENT((#281747)); +#281747 = SURFACE_STYLE_USAGE(.BOTH.,#281748); +#281748 = SURFACE_SIDE_STYLE('',(#281749)); +#281749 = SURFACE_STYLE_FILL_AREA(#281750); +#281750 = FILL_AREA_STYLE('',(#281751)); +#281751 = FILL_AREA_STYLE_COLOUR('',#280691); +#281752 = STYLED_ITEM('color',(#281753),#78676); +#281753 = PRESENTATION_STYLE_ASSIGNMENT((#281754,#281759)); +#281754 = SURFACE_STYLE_USAGE(.BOTH.,#281755); +#281755 = SURFACE_SIDE_STYLE('',(#281756)); +#281756 = SURFACE_STYLE_FILL_AREA(#281757); +#281757 = FILL_AREA_STYLE('',(#281758)); +#281758 = FILL_AREA_STYLE_COLOUR('',#278623); +#281759 = CURVE_STYLE('',#281760,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281761 = OVER_RIDING_STYLED_ITEM('overriding color',(#281762),#78678, + #281752); +#281762 = PRESENTATION_STYLE_ASSIGNMENT((#281763)); +#281763 = SURFACE_STYLE_USAGE(.BOTH.,#281764); +#281764 = SURFACE_SIDE_STYLE('',(#281765)); +#281765 = SURFACE_STYLE_FILL_AREA(#281766); +#281766 = FILL_AREA_STYLE('',(#281767)); +#281767 = FILL_AREA_STYLE_COLOUR('',#280691); +#281768 = OVER_RIDING_STYLED_ITEM('overriding color',(#281769),#78734, + #281752); +#281769 = PRESENTATION_STYLE_ASSIGNMENT((#281770)); +#281770 = SURFACE_STYLE_USAGE(.BOTH.,#281771); +#281771 = SURFACE_SIDE_STYLE('',(#281772)); +#281772 = SURFACE_STYLE_FILL_AREA(#281773); +#281773 = FILL_AREA_STYLE('',(#281774)); +#281774 = FILL_AREA_STYLE_COLOUR('',#280691); +#281775 = OVER_RIDING_STYLED_ITEM('overriding color',(#281776),#78765, + #281752); +#281776 = PRESENTATION_STYLE_ASSIGNMENT((#281777)); +#281777 = SURFACE_STYLE_USAGE(.BOTH.,#281778); +#281778 = SURFACE_SIDE_STYLE('',(#281779)); +#281779 = SURFACE_STYLE_FILL_AREA(#281780); +#281780 = FILL_AREA_STYLE('',(#281781)); +#281781 = FILL_AREA_STYLE_COLOUR('',#280691); +#281782 = OVER_RIDING_STYLED_ITEM('overriding color',(#281783),#78789, + #281752); +#281783 = PRESENTATION_STYLE_ASSIGNMENT((#281784)); +#281784 = SURFACE_STYLE_USAGE(.BOTH.,#281785); +#281785 = SURFACE_SIDE_STYLE('',(#281786)); +#281786 = SURFACE_STYLE_FILL_AREA(#281787); +#281787 = FILL_AREA_STYLE('',(#281788)); +#281788 = FILL_AREA_STYLE_COLOUR('',#280691); +#281789 = OVER_RIDING_STYLED_ITEM('overriding color',(#281790),#78813, + #281752); +#281790 = PRESENTATION_STYLE_ASSIGNMENT((#281791)); +#281791 = SURFACE_STYLE_USAGE(.BOTH.,#281792); +#281792 = SURFACE_SIDE_STYLE('',(#281793)); +#281793 = SURFACE_STYLE_FILL_AREA(#281794); +#281794 = FILL_AREA_STYLE('',(#281795)); +#281795 = FILL_AREA_STYLE_COLOUR('',#280691); +#281796 = OVER_RIDING_STYLED_ITEM('overriding color',(#281797),#78837, + #281752); +#281797 = PRESENTATION_STYLE_ASSIGNMENT((#281798)); +#281798 = SURFACE_STYLE_USAGE(.BOTH.,#281799); +#281799 = SURFACE_SIDE_STYLE('',(#281800)); +#281800 = SURFACE_STYLE_FILL_AREA(#281801); +#281801 = FILL_AREA_STYLE('',(#281802)); +#281802 = FILL_AREA_STYLE_COLOUR('',#280691); +#281803 = OVER_RIDING_STYLED_ITEM('overriding color',(#281804),#78861, + #281752); +#281804 = PRESENTATION_STYLE_ASSIGNMENT((#281805)); +#281805 = SURFACE_STYLE_USAGE(.BOTH.,#281806); +#281806 = SURFACE_SIDE_STYLE('',(#281807)); +#281807 = SURFACE_STYLE_FILL_AREA(#281808); +#281808 = FILL_AREA_STYLE('',(#281809)); +#281809 = FILL_AREA_STYLE_COLOUR('',#280691); +#281810 = OVER_RIDING_STYLED_ITEM('overriding color',(#281811),#78878, + #281752); +#281811 = PRESENTATION_STYLE_ASSIGNMENT((#281812)); +#281812 = SURFACE_STYLE_USAGE(.BOTH.,#281813); +#281813 = SURFACE_SIDE_STYLE('',(#281814)); +#281814 = SURFACE_STYLE_FILL_AREA(#281815); +#281815 = FILL_AREA_STYLE('',(#281816)); +#281816 = FILL_AREA_STYLE_COLOUR('',#280691); +#281817 = STYLED_ITEM('color',(#281818),#78892); +#281818 = PRESENTATION_STYLE_ASSIGNMENT((#281819,#281824)); +#281819 = SURFACE_STYLE_USAGE(.BOTH.,#281820); +#281820 = SURFACE_SIDE_STYLE('',(#281821)); +#281821 = SURFACE_STYLE_FILL_AREA(#281822); +#281822 = FILL_AREA_STYLE('',(#281823)); +#281823 = FILL_AREA_STYLE_COLOUR('',#278623); +#281824 = CURVE_STYLE('',#281825,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281825 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281826 = OVER_RIDING_STYLED_ITEM('overriding color',(#281827),#78894, + #281817); +#281827 = PRESENTATION_STYLE_ASSIGNMENT((#281828)); +#281828 = SURFACE_STYLE_USAGE(.BOTH.,#281829); +#281829 = SURFACE_SIDE_STYLE('',(#281830)); +#281830 = SURFACE_STYLE_FILL_AREA(#281831); +#281831 = FILL_AREA_STYLE('',(#281832)); +#281832 = FILL_AREA_STYLE_COLOUR('',#280691); +#281833 = OVER_RIDING_STYLED_ITEM('overriding color',(#281834),#78950, + #281817); +#281834 = PRESENTATION_STYLE_ASSIGNMENT((#281835)); +#281835 = SURFACE_STYLE_USAGE(.BOTH.,#281836); +#281836 = SURFACE_SIDE_STYLE('',(#281837)); +#281837 = SURFACE_STYLE_FILL_AREA(#281838); +#281838 = FILL_AREA_STYLE('',(#281839)); +#281839 = FILL_AREA_STYLE_COLOUR('',#280691); +#281840 = OVER_RIDING_STYLED_ITEM('overriding color',(#281841),#78981, + #281817); +#281841 = PRESENTATION_STYLE_ASSIGNMENT((#281842)); +#281842 = SURFACE_STYLE_USAGE(.BOTH.,#281843); +#281843 = SURFACE_SIDE_STYLE('',(#281844)); +#281844 = SURFACE_STYLE_FILL_AREA(#281845); +#281845 = FILL_AREA_STYLE('',(#281846)); +#281846 = FILL_AREA_STYLE_COLOUR('',#280691); +#281847 = OVER_RIDING_STYLED_ITEM('overriding color',(#281848),#79005, + #281817); +#281848 = PRESENTATION_STYLE_ASSIGNMENT((#281849)); +#281849 = SURFACE_STYLE_USAGE(.BOTH.,#281850); +#281850 = SURFACE_SIDE_STYLE('',(#281851)); +#281851 = SURFACE_STYLE_FILL_AREA(#281852); +#281852 = FILL_AREA_STYLE('',(#281853)); +#281853 = FILL_AREA_STYLE_COLOUR('',#280691); +#281854 = OVER_RIDING_STYLED_ITEM('overriding color',(#281855),#79029, + #281817); +#281855 = PRESENTATION_STYLE_ASSIGNMENT((#281856)); +#281856 = SURFACE_STYLE_USAGE(.BOTH.,#281857); +#281857 = SURFACE_SIDE_STYLE('',(#281858)); +#281858 = SURFACE_STYLE_FILL_AREA(#281859); +#281859 = FILL_AREA_STYLE('',(#281860)); +#281860 = FILL_AREA_STYLE_COLOUR('',#280691); +#281861 = OVER_RIDING_STYLED_ITEM('overriding color',(#281862),#79053, + #281817); +#281862 = PRESENTATION_STYLE_ASSIGNMENT((#281863)); +#281863 = SURFACE_STYLE_USAGE(.BOTH.,#281864); +#281864 = SURFACE_SIDE_STYLE('',(#281865)); +#281865 = SURFACE_STYLE_FILL_AREA(#281866); +#281866 = FILL_AREA_STYLE('',(#281867)); +#281867 = FILL_AREA_STYLE_COLOUR('',#280691); +#281868 = OVER_RIDING_STYLED_ITEM('overriding color',(#281869),#79077, + #281817); +#281869 = PRESENTATION_STYLE_ASSIGNMENT((#281870)); +#281870 = SURFACE_STYLE_USAGE(.BOTH.,#281871); +#281871 = SURFACE_SIDE_STYLE('',(#281872)); +#281872 = SURFACE_STYLE_FILL_AREA(#281873); +#281873 = FILL_AREA_STYLE('',(#281874)); +#281874 = FILL_AREA_STYLE_COLOUR('',#280691); +#281875 = OVER_RIDING_STYLED_ITEM('overriding color',(#281876),#79094, + #281817); +#281876 = PRESENTATION_STYLE_ASSIGNMENT((#281877)); +#281877 = SURFACE_STYLE_USAGE(.BOTH.,#281878); +#281878 = SURFACE_SIDE_STYLE('',(#281879)); +#281879 = SURFACE_STYLE_FILL_AREA(#281880); +#281880 = FILL_AREA_STYLE('',(#281881)); +#281881 = FILL_AREA_STYLE_COLOUR('',#280691); +#281882 = STYLED_ITEM('color',(#281883),#79108); +#281883 = PRESENTATION_STYLE_ASSIGNMENT((#281884,#281889)); +#281884 = SURFACE_STYLE_USAGE(.BOTH.,#281885); +#281885 = SURFACE_SIDE_STYLE('',(#281886)); +#281886 = SURFACE_STYLE_FILL_AREA(#281887); +#281887 = FILL_AREA_STYLE('',(#281888)); +#281888 = FILL_AREA_STYLE_COLOUR('',#278623); +#281889 = CURVE_STYLE('',#281890,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281891 = OVER_RIDING_STYLED_ITEM('overriding color',(#281892),#79110, + #281882); +#281892 = PRESENTATION_STYLE_ASSIGNMENT((#281893)); +#281893 = SURFACE_STYLE_USAGE(.BOTH.,#281894); +#281894 = SURFACE_SIDE_STYLE('',(#281895)); +#281895 = SURFACE_STYLE_FILL_AREA(#281896); +#281896 = FILL_AREA_STYLE('',(#281897)); +#281897 = FILL_AREA_STYLE_COLOUR('',#280691); +#281898 = OVER_RIDING_STYLED_ITEM('overriding color',(#281899),#79166, + #281882); +#281899 = PRESENTATION_STYLE_ASSIGNMENT((#281900)); +#281900 = SURFACE_STYLE_USAGE(.BOTH.,#281901); +#281901 = SURFACE_SIDE_STYLE('',(#281902)); +#281902 = SURFACE_STYLE_FILL_AREA(#281903); +#281903 = FILL_AREA_STYLE('',(#281904)); +#281904 = FILL_AREA_STYLE_COLOUR('',#280691); +#281905 = OVER_RIDING_STYLED_ITEM('overriding color',(#281906),#79197, + #281882); +#281906 = PRESENTATION_STYLE_ASSIGNMENT((#281907)); +#281907 = SURFACE_STYLE_USAGE(.BOTH.,#281908); +#281908 = SURFACE_SIDE_STYLE('',(#281909)); +#281909 = SURFACE_STYLE_FILL_AREA(#281910); +#281910 = FILL_AREA_STYLE('',(#281911)); +#281911 = FILL_AREA_STYLE_COLOUR('',#280691); +#281912 = OVER_RIDING_STYLED_ITEM('overriding color',(#281913),#79221, + #281882); +#281913 = PRESENTATION_STYLE_ASSIGNMENT((#281914)); +#281914 = SURFACE_STYLE_USAGE(.BOTH.,#281915); +#281915 = SURFACE_SIDE_STYLE('',(#281916)); +#281916 = SURFACE_STYLE_FILL_AREA(#281917); +#281917 = FILL_AREA_STYLE('',(#281918)); +#281918 = FILL_AREA_STYLE_COLOUR('',#280691); +#281919 = OVER_RIDING_STYLED_ITEM('overriding color',(#281920),#79245, + #281882); +#281920 = PRESENTATION_STYLE_ASSIGNMENT((#281921)); +#281921 = SURFACE_STYLE_USAGE(.BOTH.,#281922); +#281922 = SURFACE_SIDE_STYLE('',(#281923)); +#281923 = SURFACE_STYLE_FILL_AREA(#281924); +#281924 = FILL_AREA_STYLE('',(#281925)); +#281925 = FILL_AREA_STYLE_COLOUR('',#280691); +#281926 = OVER_RIDING_STYLED_ITEM('overriding color',(#281927),#79269, + #281882); +#281927 = PRESENTATION_STYLE_ASSIGNMENT((#281928)); +#281928 = SURFACE_STYLE_USAGE(.BOTH.,#281929); +#281929 = SURFACE_SIDE_STYLE('',(#281930)); +#281930 = SURFACE_STYLE_FILL_AREA(#281931); +#281931 = FILL_AREA_STYLE('',(#281932)); +#281932 = FILL_AREA_STYLE_COLOUR('',#280691); +#281933 = OVER_RIDING_STYLED_ITEM('overriding color',(#281934),#79293, + #281882); +#281934 = PRESENTATION_STYLE_ASSIGNMENT((#281935)); +#281935 = SURFACE_STYLE_USAGE(.BOTH.,#281936); +#281936 = SURFACE_SIDE_STYLE('',(#281937)); +#281937 = SURFACE_STYLE_FILL_AREA(#281938); +#281938 = FILL_AREA_STYLE('',(#281939)); +#281939 = FILL_AREA_STYLE_COLOUR('',#280691); +#281940 = OVER_RIDING_STYLED_ITEM('overriding color',(#281941),#79310, + #281882); +#281941 = PRESENTATION_STYLE_ASSIGNMENT((#281942)); +#281942 = SURFACE_STYLE_USAGE(.BOTH.,#281943); +#281943 = SURFACE_SIDE_STYLE('',(#281944)); +#281944 = SURFACE_STYLE_FILL_AREA(#281945); +#281945 = FILL_AREA_STYLE('',(#281946)); +#281946 = FILL_AREA_STYLE_COLOUR('',#280691); +#281947 = STYLED_ITEM('color',(#281948),#79324); +#281948 = PRESENTATION_STYLE_ASSIGNMENT((#281949,#281954)); +#281949 = SURFACE_STYLE_USAGE(.BOTH.,#281950); +#281950 = SURFACE_SIDE_STYLE('',(#281951)); +#281951 = SURFACE_STYLE_FILL_AREA(#281952); +#281952 = FILL_AREA_STYLE('',(#281953)); +#281953 = FILL_AREA_STYLE_COLOUR('',#278623); +#281954 = CURVE_STYLE('',#281955,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#281955 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281956 = OVER_RIDING_STYLED_ITEM('overriding color',(#281957),#79326, + #281947); +#281957 = PRESENTATION_STYLE_ASSIGNMENT((#281958)); +#281958 = SURFACE_STYLE_USAGE(.BOTH.,#281959); +#281959 = SURFACE_SIDE_STYLE('',(#281960)); +#281960 = SURFACE_STYLE_FILL_AREA(#281961); +#281961 = FILL_AREA_STYLE('',(#281962)); +#281962 = FILL_AREA_STYLE_COLOUR('',#280691); +#281963 = OVER_RIDING_STYLED_ITEM('overriding color',(#281964),#79382, + #281947); +#281964 = PRESENTATION_STYLE_ASSIGNMENT((#281965)); +#281965 = SURFACE_STYLE_USAGE(.BOTH.,#281966); +#281966 = SURFACE_SIDE_STYLE('',(#281967)); +#281967 = SURFACE_STYLE_FILL_AREA(#281968); +#281968 = FILL_AREA_STYLE('',(#281969)); +#281969 = FILL_AREA_STYLE_COLOUR('',#280691); +#281970 = OVER_RIDING_STYLED_ITEM('overriding color',(#281971),#79413, + #281947); +#281971 = PRESENTATION_STYLE_ASSIGNMENT((#281972)); +#281972 = SURFACE_STYLE_USAGE(.BOTH.,#281973); +#281973 = SURFACE_SIDE_STYLE('',(#281974)); +#281974 = SURFACE_STYLE_FILL_AREA(#281975); +#281975 = FILL_AREA_STYLE('',(#281976)); +#281976 = FILL_AREA_STYLE_COLOUR('',#280691); +#281977 = OVER_RIDING_STYLED_ITEM('overriding color',(#281978),#79437, + #281947); +#281978 = PRESENTATION_STYLE_ASSIGNMENT((#281979)); +#281979 = SURFACE_STYLE_USAGE(.BOTH.,#281980); +#281980 = SURFACE_SIDE_STYLE('',(#281981)); +#281981 = SURFACE_STYLE_FILL_AREA(#281982); +#281982 = FILL_AREA_STYLE('',(#281983)); +#281983 = FILL_AREA_STYLE_COLOUR('',#280691); +#281984 = OVER_RIDING_STYLED_ITEM('overriding color',(#281985),#79461, + #281947); +#281985 = PRESENTATION_STYLE_ASSIGNMENT((#281986)); +#281986 = SURFACE_STYLE_USAGE(.BOTH.,#281987); +#281987 = SURFACE_SIDE_STYLE('',(#281988)); +#281988 = SURFACE_STYLE_FILL_AREA(#281989); +#281989 = FILL_AREA_STYLE('',(#281990)); +#281990 = FILL_AREA_STYLE_COLOUR('',#280691); +#281991 = OVER_RIDING_STYLED_ITEM('overriding color',(#281992),#79485, + #281947); +#281992 = PRESENTATION_STYLE_ASSIGNMENT((#281993)); +#281993 = SURFACE_STYLE_USAGE(.BOTH.,#281994); +#281994 = SURFACE_SIDE_STYLE('',(#281995)); +#281995 = SURFACE_STYLE_FILL_AREA(#281996); +#281996 = FILL_AREA_STYLE('',(#281997)); +#281997 = FILL_AREA_STYLE_COLOUR('',#280691); +#281998 = OVER_RIDING_STYLED_ITEM('overriding color',(#281999),#79509, + #281947); +#281999 = PRESENTATION_STYLE_ASSIGNMENT((#282000)); +#282000 = SURFACE_STYLE_USAGE(.BOTH.,#282001); +#282001 = SURFACE_SIDE_STYLE('',(#282002)); +#282002 = SURFACE_STYLE_FILL_AREA(#282003); +#282003 = FILL_AREA_STYLE('',(#282004)); +#282004 = FILL_AREA_STYLE_COLOUR('',#280691); +#282005 = OVER_RIDING_STYLED_ITEM('overriding color',(#282006),#79526, + #281947); +#282006 = PRESENTATION_STYLE_ASSIGNMENT((#282007)); +#282007 = SURFACE_STYLE_USAGE(.BOTH.,#282008); +#282008 = SURFACE_SIDE_STYLE('',(#282009)); +#282009 = SURFACE_STYLE_FILL_AREA(#282010); +#282010 = FILL_AREA_STYLE('',(#282011)); +#282011 = FILL_AREA_STYLE_COLOUR('',#280691); +#282012 = STYLED_ITEM('color',(#282013),#79540); +#282013 = PRESENTATION_STYLE_ASSIGNMENT((#282014,#282019)); +#282014 = SURFACE_STYLE_USAGE(.BOTH.,#282015); +#282015 = SURFACE_SIDE_STYLE('',(#282016)); +#282016 = SURFACE_STYLE_FILL_AREA(#282017); +#282017 = FILL_AREA_STYLE('',(#282018)); +#282018 = FILL_AREA_STYLE_COLOUR('',#278623); +#282019 = CURVE_STYLE('',#282020,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282021 = OVER_RIDING_STYLED_ITEM('overriding color',(#282022),#79542, + #282012); +#282022 = PRESENTATION_STYLE_ASSIGNMENT((#282023)); +#282023 = SURFACE_STYLE_USAGE(.BOTH.,#282024); +#282024 = SURFACE_SIDE_STYLE('',(#282025)); +#282025 = SURFACE_STYLE_FILL_AREA(#282026); +#282026 = FILL_AREA_STYLE('',(#282027)); +#282027 = FILL_AREA_STYLE_COLOUR('',#280691); +#282028 = OVER_RIDING_STYLED_ITEM('overriding color',(#282029),#79598, + #282012); +#282029 = PRESENTATION_STYLE_ASSIGNMENT((#282030)); +#282030 = SURFACE_STYLE_USAGE(.BOTH.,#282031); +#282031 = SURFACE_SIDE_STYLE('',(#282032)); +#282032 = SURFACE_STYLE_FILL_AREA(#282033); +#282033 = FILL_AREA_STYLE('',(#282034)); +#282034 = FILL_AREA_STYLE_COLOUR('',#280691); +#282035 = OVER_RIDING_STYLED_ITEM('overriding color',(#282036),#79629, + #282012); +#282036 = PRESENTATION_STYLE_ASSIGNMENT((#282037)); +#282037 = SURFACE_STYLE_USAGE(.BOTH.,#282038); +#282038 = SURFACE_SIDE_STYLE('',(#282039)); +#282039 = SURFACE_STYLE_FILL_AREA(#282040); +#282040 = FILL_AREA_STYLE('',(#282041)); +#282041 = FILL_AREA_STYLE_COLOUR('',#280691); +#282042 = OVER_RIDING_STYLED_ITEM('overriding color',(#282043),#79653, + #282012); +#282043 = PRESENTATION_STYLE_ASSIGNMENT((#282044)); +#282044 = SURFACE_STYLE_USAGE(.BOTH.,#282045); +#282045 = SURFACE_SIDE_STYLE('',(#282046)); +#282046 = SURFACE_STYLE_FILL_AREA(#282047); +#282047 = FILL_AREA_STYLE('',(#282048)); +#282048 = FILL_AREA_STYLE_COLOUR('',#280691); +#282049 = OVER_RIDING_STYLED_ITEM('overriding color',(#282050),#79677, + #282012); +#282050 = PRESENTATION_STYLE_ASSIGNMENT((#282051)); +#282051 = SURFACE_STYLE_USAGE(.BOTH.,#282052); +#282052 = SURFACE_SIDE_STYLE('',(#282053)); +#282053 = SURFACE_STYLE_FILL_AREA(#282054); +#282054 = FILL_AREA_STYLE('',(#282055)); +#282055 = FILL_AREA_STYLE_COLOUR('',#280691); +#282056 = OVER_RIDING_STYLED_ITEM('overriding color',(#282057),#79701, + #282012); +#282057 = PRESENTATION_STYLE_ASSIGNMENT((#282058)); +#282058 = SURFACE_STYLE_USAGE(.BOTH.,#282059); +#282059 = SURFACE_SIDE_STYLE('',(#282060)); +#282060 = SURFACE_STYLE_FILL_AREA(#282061); +#282061 = FILL_AREA_STYLE('',(#282062)); +#282062 = FILL_AREA_STYLE_COLOUR('',#280691); +#282063 = OVER_RIDING_STYLED_ITEM('overriding color',(#282064),#79725, + #282012); +#282064 = PRESENTATION_STYLE_ASSIGNMENT((#282065)); +#282065 = SURFACE_STYLE_USAGE(.BOTH.,#282066); +#282066 = SURFACE_SIDE_STYLE('',(#282067)); +#282067 = SURFACE_STYLE_FILL_AREA(#282068); +#282068 = FILL_AREA_STYLE('',(#282069)); +#282069 = FILL_AREA_STYLE_COLOUR('',#280691); +#282070 = OVER_RIDING_STYLED_ITEM('overriding color',(#282071),#79742, + #282012); +#282071 = PRESENTATION_STYLE_ASSIGNMENT((#282072)); +#282072 = SURFACE_STYLE_USAGE(.BOTH.,#282073); +#282073 = SURFACE_SIDE_STYLE('',(#282074)); +#282074 = SURFACE_STYLE_FILL_AREA(#282075); +#282075 = FILL_AREA_STYLE('',(#282076)); +#282076 = FILL_AREA_STYLE_COLOUR('',#280691); +#282077 = STYLED_ITEM('color',(#282078),#79756); +#282078 = PRESENTATION_STYLE_ASSIGNMENT((#282079,#282084)); +#282079 = SURFACE_STYLE_USAGE(.BOTH.,#282080); +#282080 = SURFACE_SIDE_STYLE('',(#282081)); +#282081 = SURFACE_STYLE_FILL_AREA(#282082); +#282082 = FILL_AREA_STYLE('',(#282083)); +#282083 = FILL_AREA_STYLE_COLOUR('',#278623); +#282084 = CURVE_STYLE('',#282085,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282085 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282086 = OVER_RIDING_STYLED_ITEM('overriding color',(#282087),#79758, + #282077); +#282087 = PRESENTATION_STYLE_ASSIGNMENT((#282088)); +#282088 = SURFACE_STYLE_USAGE(.BOTH.,#282089); +#282089 = SURFACE_SIDE_STYLE('',(#282090)); +#282090 = SURFACE_STYLE_FILL_AREA(#282091); +#282091 = FILL_AREA_STYLE('',(#282092)); +#282092 = FILL_AREA_STYLE_COLOUR('',#280691); +#282093 = OVER_RIDING_STYLED_ITEM('overriding color',(#282094),#79814, + #282077); +#282094 = PRESENTATION_STYLE_ASSIGNMENT((#282095)); +#282095 = SURFACE_STYLE_USAGE(.BOTH.,#282096); +#282096 = SURFACE_SIDE_STYLE('',(#282097)); +#282097 = SURFACE_STYLE_FILL_AREA(#282098); +#282098 = FILL_AREA_STYLE('',(#282099)); +#282099 = FILL_AREA_STYLE_COLOUR('',#280691); +#282100 = OVER_RIDING_STYLED_ITEM('overriding color',(#282101),#79845, + #282077); +#282101 = PRESENTATION_STYLE_ASSIGNMENT((#282102)); +#282102 = SURFACE_STYLE_USAGE(.BOTH.,#282103); +#282103 = SURFACE_SIDE_STYLE('',(#282104)); +#282104 = SURFACE_STYLE_FILL_AREA(#282105); +#282105 = FILL_AREA_STYLE('',(#282106)); +#282106 = FILL_AREA_STYLE_COLOUR('',#280691); +#282107 = OVER_RIDING_STYLED_ITEM('overriding color',(#282108),#79869, + #282077); +#282108 = PRESENTATION_STYLE_ASSIGNMENT((#282109)); +#282109 = SURFACE_STYLE_USAGE(.BOTH.,#282110); +#282110 = SURFACE_SIDE_STYLE('',(#282111)); +#282111 = SURFACE_STYLE_FILL_AREA(#282112); +#282112 = FILL_AREA_STYLE('',(#282113)); +#282113 = FILL_AREA_STYLE_COLOUR('',#280691); +#282114 = OVER_RIDING_STYLED_ITEM('overriding color',(#282115),#79893, + #282077); +#282115 = PRESENTATION_STYLE_ASSIGNMENT((#282116)); +#282116 = SURFACE_STYLE_USAGE(.BOTH.,#282117); +#282117 = SURFACE_SIDE_STYLE('',(#282118)); +#282118 = SURFACE_STYLE_FILL_AREA(#282119); +#282119 = FILL_AREA_STYLE('',(#282120)); +#282120 = FILL_AREA_STYLE_COLOUR('',#280691); +#282121 = OVER_RIDING_STYLED_ITEM('overriding color',(#282122),#79917, + #282077); +#282122 = PRESENTATION_STYLE_ASSIGNMENT((#282123)); +#282123 = SURFACE_STYLE_USAGE(.BOTH.,#282124); +#282124 = SURFACE_SIDE_STYLE('',(#282125)); +#282125 = SURFACE_STYLE_FILL_AREA(#282126); +#282126 = FILL_AREA_STYLE('',(#282127)); +#282127 = FILL_AREA_STYLE_COLOUR('',#280691); +#282128 = OVER_RIDING_STYLED_ITEM('overriding color',(#282129),#79941, + #282077); +#282129 = PRESENTATION_STYLE_ASSIGNMENT((#282130)); +#282130 = SURFACE_STYLE_USAGE(.BOTH.,#282131); +#282131 = SURFACE_SIDE_STYLE('',(#282132)); +#282132 = SURFACE_STYLE_FILL_AREA(#282133); +#282133 = FILL_AREA_STYLE('',(#282134)); +#282134 = FILL_AREA_STYLE_COLOUR('',#280691); +#282135 = OVER_RIDING_STYLED_ITEM('overriding color',(#282136),#79958, + #282077); +#282136 = PRESENTATION_STYLE_ASSIGNMENT((#282137)); +#282137 = SURFACE_STYLE_USAGE(.BOTH.,#282138); +#282138 = SURFACE_SIDE_STYLE('',(#282139)); +#282139 = SURFACE_STYLE_FILL_AREA(#282140); +#282140 = FILL_AREA_STYLE('',(#282141)); +#282141 = FILL_AREA_STYLE_COLOUR('',#280691); +#282142 = STYLED_ITEM('color',(#282143),#79972); +#282143 = PRESENTATION_STYLE_ASSIGNMENT((#282144,#282149)); +#282144 = SURFACE_STYLE_USAGE(.BOTH.,#282145); +#282145 = SURFACE_SIDE_STYLE('',(#282146)); +#282146 = SURFACE_STYLE_FILL_AREA(#282147); +#282147 = FILL_AREA_STYLE('',(#282148)); +#282148 = FILL_AREA_STYLE_COLOUR('',#278623); +#282149 = CURVE_STYLE('',#282150,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282150 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282151 = OVER_RIDING_STYLED_ITEM('overriding color',(#282152),#79974, + #282142); +#282152 = PRESENTATION_STYLE_ASSIGNMENT((#282153)); +#282153 = SURFACE_STYLE_USAGE(.BOTH.,#282154); +#282154 = SURFACE_SIDE_STYLE('',(#282155)); +#282155 = SURFACE_STYLE_FILL_AREA(#282156); +#282156 = FILL_AREA_STYLE('',(#282157)); +#282157 = FILL_AREA_STYLE_COLOUR('',#280691); +#282158 = OVER_RIDING_STYLED_ITEM('overriding color',(#282159),#80030, + #282142); +#282159 = PRESENTATION_STYLE_ASSIGNMENT((#282160)); +#282160 = SURFACE_STYLE_USAGE(.BOTH.,#282161); +#282161 = SURFACE_SIDE_STYLE('',(#282162)); +#282162 = SURFACE_STYLE_FILL_AREA(#282163); +#282163 = FILL_AREA_STYLE('',(#282164)); +#282164 = FILL_AREA_STYLE_COLOUR('',#280691); +#282165 = OVER_RIDING_STYLED_ITEM('overriding color',(#282166),#80061, + #282142); +#282166 = PRESENTATION_STYLE_ASSIGNMENT((#282167)); +#282167 = SURFACE_STYLE_USAGE(.BOTH.,#282168); +#282168 = SURFACE_SIDE_STYLE('',(#282169)); +#282169 = SURFACE_STYLE_FILL_AREA(#282170); +#282170 = FILL_AREA_STYLE('',(#282171)); +#282171 = FILL_AREA_STYLE_COLOUR('',#280691); +#282172 = OVER_RIDING_STYLED_ITEM('overriding color',(#282173),#80085, + #282142); +#282173 = PRESENTATION_STYLE_ASSIGNMENT((#282174)); +#282174 = SURFACE_STYLE_USAGE(.BOTH.,#282175); +#282175 = SURFACE_SIDE_STYLE('',(#282176)); +#282176 = SURFACE_STYLE_FILL_AREA(#282177); +#282177 = FILL_AREA_STYLE('',(#282178)); +#282178 = FILL_AREA_STYLE_COLOUR('',#280691); +#282179 = OVER_RIDING_STYLED_ITEM('overriding color',(#282180),#80109, + #282142); +#282180 = PRESENTATION_STYLE_ASSIGNMENT((#282181)); +#282181 = SURFACE_STYLE_USAGE(.BOTH.,#282182); +#282182 = SURFACE_SIDE_STYLE('',(#282183)); +#282183 = SURFACE_STYLE_FILL_AREA(#282184); +#282184 = FILL_AREA_STYLE('',(#282185)); +#282185 = FILL_AREA_STYLE_COLOUR('',#280691); +#282186 = OVER_RIDING_STYLED_ITEM('overriding color',(#282187),#80133, + #282142); +#282187 = PRESENTATION_STYLE_ASSIGNMENT((#282188)); +#282188 = SURFACE_STYLE_USAGE(.BOTH.,#282189); +#282189 = SURFACE_SIDE_STYLE('',(#282190)); +#282190 = SURFACE_STYLE_FILL_AREA(#282191); +#282191 = FILL_AREA_STYLE('',(#282192)); +#282192 = FILL_AREA_STYLE_COLOUR('',#280691); +#282193 = OVER_RIDING_STYLED_ITEM('overriding color',(#282194),#80157, + #282142); +#282194 = PRESENTATION_STYLE_ASSIGNMENT((#282195)); +#282195 = SURFACE_STYLE_USAGE(.BOTH.,#282196); +#282196 = SURFACE_SIDE_STYLE('',(#282197)); +#282197 = SURFACE_STYLE_FILL_AREA(#282198); +#282198 = FILL_AREA_STYLE('',(#282199)); +#282199 = FILL_AREA_STYLE_COLOUR('',#280691); +#282200 = OVER_RIDING_STYLED_ITEM('overriding color',(#282201),#80174, + #282142); +#282201 = PRESENTATION_STYLE_ASSIGNMENT((#282202)); +#282202 = SURFACE_STYLE_USAGE(.BOTH.,#282203); +#282203 = SURFACE_SIDE_STYLE('',(#282204)); +#282204 = SURFACE_STYLE_FILL_AREA(#282205); +#282205 = FILL_AREA_STYLE('',(#282206)); +#282206 = FILL_AREA_STYLE_COLOUR('',#280691); +#282207 = STYLED_ITEM('color',(#282208),#80188); +#282208 = PRESENTATION_STYLE_ASSIGNMENT((#282209,#282214)); +#282209 = SURFACE_STYLE_USAGE(.BOTH.,#282210); +#282210 = SURFACE_SIDE_STYLE('',(#282211)); +#282211 = SURFACE_STYLE_FILL_AREA(#282212); +#282212 = FILL_AREA_STYLE('',(#282213)); +#282213 = FILL_AREA_STYLE_COLOUR('',#278623); +#282214 = CURVE_STYLE('',#282215,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282215 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282216 = OVER_RIDING_STYLED_ITEM('overriding color',(#282217),#80190, + #282207); +#282217 = PRESENTATION_STYLE_ASSIGNMENT((#282218)); +#282218 = SURFACE_STYLE_USAGE(.BOTH.,#282219); +#282219 = SURFACE_SIDE_STYLE('',(#282220)); +#282220 = SURFACE_STYLE_FILL_AREA(#282221); +#282221 = FILL_AREA_STYLE('',(#282222)); +#282222 = FILL_AREA_STYLE_COLOUR('',#280691); +#282223 = OVER_RIDING_STYLED_ITEM('overriding color',(#282224),#80246, + #282207); +#282224 = PRESENTATION_STYLE_ASSIGNMENT((#282225)); +#282225 = SURFACE_STYLE_USAGE(.BOTH.,#282226); +#282226 = SURFACE_SIDE_STYLE('',(#282227)); +#282227 = SURFACE_STYLE_FILL_AREA(#282228); +#282228 = FILL_AREA_STYLE('',(#282229)); +#282229 = FILL_AREA_STYLE_COLOUR('',#280691); +#282230 = OVER_RIDING_STYLED_ITEM('overriding color',(#282231),#80277, + #282207); +#282231 = PRESENTATION_STYLE_ASSIGNMENT((#282232)); +#282232 = SURFACE_STYLE_USAGE(.BOTH.,#282233); +#282233 = SURFACE_SIDE_STYLE('',(#282234)); +#282234 = SURFACE_STYLE_FILL_AREA(#282235); +#282235 = FILL_AREA_STYLE('',(#282236)); +#282236 = FILL_AREA_STYLE_COLOUR('',#280691); +#282237 = OVER_RIDING_STYLED_ITEM('overriding color',(#282238),#80301, + #282207); +#282238 = PRESENTATION_STYLE_ASSIGNMENT((#282239)); +#282239 = SURFACE_STYLE_USAGE(.BOTH.,#282240); +#282240 = SURFACE_SIDE_STYLE('',(#282241)); +#282241 = SURFACE_STYLE_FILL_AREA(#282242); +#282242 = FILL_AREA_STYLE('',(#282243)); +#282243 = FILL_AREA_STYLE_COLOUR('',#280691); +#282244 = OVER_RIDING_STYLED_ITEM('overriding color',(#282245),#80325, + #282207); +#282245 = PRESENTATION_STYLE_ASSIGNMENT((#282246)); +#282246 = SURFACE_STYLE_USAGE(.BOTH.,#282247); +#282247 = SURFACE_SIDE_STYLE('',(#282248)); +#282248 = SURFACE_STYLE_FILL_AREA(#282249); +#282249 = FILL_AREA_STYLE('',(#282250)); +#282250 = FILL_AREA_STYLE_COLOUR('',#280691); +#282251 = OVER_RIDING_STYLED_ITEM('overriding color',(#282252),#80349, + #282207); +#282252 = PRESENTATION_STYLE_ASSIGNMENT((#282253)); +#282253 = SURFACE_STYLE_USAGE(.BOTH.,#282254); +#282254 = SURFACE_SIDE_STYLE('',(#282255)); +#282255 = SURFACE_STYLE_FILL_AREA(#282256); +#282256 = FILL_AREA_STYLE('',(#282257)); +#282257 = FILL_AREA_STYLE_COLOUR('',#280691); +#282258 = OVER_RIDING_STYLED_ITEM('overriding color',(#282259),#80373, + #282207); +#282259 = PRESENTATION_STYLE_ASSIGNMENT((#282260)); +#282260 = SURFACE_STYLE_USAGE(.BOTH.,#282261); +#282261 = SURFACE_SIDE_STYLE('',(#282262)); +#282262 = SURFACE_STYLE_FILL_AREA(#282263); +#282263 = FILL_AREA_STYLE('',(#282264)); +#282264 = FILL_AREA_STYLE_COLOUR('',#280691); +#282265 = OVER_RIDING_STYLED_ITEM('overriding color',(#282266),#80390, + #282207); +#282266 = PRESENTATION_STYLE_ASSIGNMENT((#282267)); +#282267 = SURFACE_STYLE_USAGE(.BOTH.,#282268); +#282268 = SURFACE_SIDE_STYLE('',(#282269)); +#282269 = SURFACE_STYLE_FILL_AREA(#282270); +#282270 = FILL_AREA_STYLE('',(#282271)); +#282271 = FILL_AREA_STYLE_COLOUR('',#280691); +#282272 = STYLED_ITEM('color',(#282273),#80404); +#282273 = PRESENTATION_STYLE_ASSIGNMENT((#282274,#282279)); +#282274 = SURFACE_STYLE_USAGE(.BOTH.,#282275); +#282275 = SURFACE_SIDE_STYLE('',(#282276)); +#282276 = SURFACE_STYLE_FILL_AREA(#282277); +#282277 = FILL_AREA_STYLE('',(#282278)); +#282278 = FILL_AREA_STYLE_COLOUR('',#278623); +#282279 = CURVE_STYLE('',#282280,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282281 = OVER_RIDING_STYLED_ITEM('overriding color',(#282282),#80406, + #282272); +#282282 = PRESENTATION_STYLE_ASSIGNMENT((#282283)); +#282283 = SURFACE_STYLE_USAGE(.BOTH.,#282284); +#282284 = SURFACE_SIDE_STYLE('',(#282285)); +#282285 = SURFACE_STYLE_FILL_AREA(#282286); +#282286 = FILL_AREA_STYLE('',(#282287)); +#282287 = FILL_AREA_STYLE_COLOUR('',#280691); +#282288 = OVER_RIDING_STYLED_ITEM('overriding color',(#282289),#80462, + #282272); +#282289 = PRESENTATION_STYLE_ASSIGNMENT((#282290)); +#282290 = SURFACE_STYLE_USAGE(.BOTH.,#282291); +#282291 = SURFACE_SIDE_STYLE('',(#282292)); +#282292 = SURFACE_STYLE_FILL_AREA(#282293); +#282293 = FILL_AREA_STYLE('',(#282294)); +#282294 = FILL_AREA_STYLE_COLOUR('',#280691); +#282295 = OVER_RIDING_STYLED_ITEM('overriding color',(#282296),#80493, + #282272); +#282296 = PRESENTATION_STYLE_ASSIGNMENT((#282297)); +#282297 = SURFACE_STYLE_USAGE(.BOTH.,#282298); +#282298 = SURFACE_SIDE_STYLE('',(#282299)); +#282299 = SURFACE_STYLE_FILL_AREA(#282300); +#282300 = FILL_AREA_STYLE('',(#282301)); +#282301 = FILL_AREA_STYLE_COLOUR('',#280691); +#282302 = OVER_RIDING_STYLED_ITEM('overriding color',(#282303),#80517, + #282272); +#282303 = PRESENTATION_STYLE_ASSIGNMENT((#282304)); +#282304 = SURFACE_STYLE_USAGE(.BOTH.,#282305); +#282305 = SURFACE_SIDE_STYLE('',(#282306)); +#282306 = SURFACE_STYLE_FILL_AREA(#282307); +#282307 = FILL_AREA_STYLE('',(#282308)); +#282308 = FILL_AREA_STYLE_COLOUR('',#280691); +#282309 = OVER_RIDING_STYLED_ITEM('overriding color',(#282310),#80541, + #282272); +#282310 = PRESENTATION_STYLE_ASSIGNMENT((#282311)); +#282311 = SURFACE_STYLE_USAGE(.BOTH.,#282312); +#282312 = SURFACE_SIDE_STYLE('',(#282313)); +#282313 = SURFACE_STYLE_FILL_AREA(#282314); +#282314 = FILL_AREA_STYLE('',(#282315)); +#282315 = FILL_AREA_STYLE_COLOUR('',#280691); +#282316 = OVER_RIDING_STYLED_ITEM('overriding color',(#282317),#80565, + #282272); +#282317 = PRESENTATION_STYLE_ASSIGNMENT((#282318)); +#282318 = SURFACE_STYLE_USAGE(.BOTH.,#282319); +#282319 = SURFACE_SIDE_STYLE('',(#282320)); +#282320 = SURFACE_STYLE_FILL_AREA(#282321); +#282321 = FILL_AREA_STYLE('',(#282322)); +#282322 = FILL_AREA_STYLE_COLOUR('',#280691); +#282323 = OVER_RIDING_STYLED_ITEM('overriding color',(#282324),#80589, + #282272); +#282324 = PRESENTATION_STYLE_ASSIGNMENT((#282325)); +#282325 = SURFACE_STYLE_USAGE(.BOTH.,#282326); +#282326 = SURFACE_SIDE_STYLE('',(#282327)); +#282327 = SURFACE_STYLE_FILL_AREA(#282328); +#282328 = FILL_AREA_STYLE('',(#282329)); +#282329 = FILL_AREA_STYLE_COLOUR('',#280691); +#282330 = OVER_RIDING_STYLED_ITEM('overriding color',(#282331),#80606, + #282272); +#282331 = PRESENTATION_STYLE_ASSIGNMENT((#282332)); +#282332 = SURFACE_STYLE_USAGE(.BOTH.,#282333); +#282333 = SURFACE_SIDE_STYLE('',(#282334)); +#282334 = SURFACE_STYLE_FILL_AREA(#282335); +#282335 = FILL_AREA_STYLE('',(#282336)); +#282336 = FILL_AREA_STYLE_COLOUR('',#280691); +#282337 = STYLED_ITEM('color',(#282338),#80620); +#282338 = PRESENTATION_STYLE_ASSIGNMENT((#282339,#282344)); +#282339 = SURFACE_STYLE_USAGE(.BOTH.,#282340); +#282340 = SURFACE_SIDE_STYLE('',(#282341)); +#282341 = SURFACE_STYLE_FILL_AREA(#282342); +#282342 = FILL_AREA_STYLE('',(#282343)); +#282343 = FILL_AREA_STYLE_COLOUR('',#278623); +#282344 = CURVE_STYLE('',#282345,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282346 = OVER_RIDING_STYLED_ITEM('overriding color',(#282347),#80622, + #282337); +#282347 = PRESENTATION_STYLE_ASSIGNMENT((#282348)); +#282348 = SURFACE_STYLE_USAGE(.BOTH.,#282349); +#282349 = SURFACE_SIDE_STYLE('',(#282350)); +#282350 = SURFACE_STYLE_FILL_AREA(#282351); +#282351 = FILL_AREA_STYLE('',(#282352)); +#282352 = FILL_AREA_STYLE_COLOUR('',#280691); +#282353 = OVER_RIDING_STYLED_ITEM('overriding color',(#282354),#80678, + #282337); +#282354 = PRESENTATION_STYLE_ASSIGNMENT((#282355)); +#282355 = SURFACE_STYLE_USAGE(.BOTH.,#282356); +#282356 = SURFACE_SIDE_STYLE('',(#282357)); +#282357 = SURFACE_STYLE_FILL_AREA(#282358); +#282358 = FILL_AREA_STYLE('',(#282359)); +#282359 = FILL_AREA_STYLE_COLOUR('',#280691); +#282360 = OVER_RIDING_STYLED_ITEM('overriding color',(#282361),#80709, + #282337); +#282361 = PRESENTATION_STYLE_ASSIGNMENT((#282362)); +#282362 = SURFACE_STYLE_USAGE(.BOTH.,#282363); +#282363 = SURFACE_SIDE_STYLE('',(#282364)); +#282364 = SURFACE_STYLE_FILL_AREA(#282365); +#282365 = FILL_AREA_STYLE('',(#282366)); +#282366 = FILL_AREA_STYLE_COLOUR('',#280691); +#282367 = OVER_RIDING_STYLED_ITEM('overriding color',(#282368),#80733, + #282337); +#282368 = PRESENTATION_STYLE_ASSIGNMENT((#282369)); +#282369 = SURFACE_STYLE_USAGE(.BOTH.,#282370); +#282370 = SURFACE_SIDE_STYLE('',(#282371)); +#282371 = SURFACE_STYLE_FILL_AREA(#282372); +#282372 = FILL_AREA_STYLE('',(#282373)); +#282373 = FILL_AREA_STYLE_COLOUR('',#280691); +#282374 = OVER_RIDING_STYLED_ITEM('overriding color',(#282375),#80757, + #282337); +#282375 = PRESENTATION_STYLE_ASSIGNMENT((#282376)); +#282376 = SURFACE_STYLE_USAGE(.BOTH.,#282377); +#282377 = SURFACE_SIDE_STYLE('',(#282378)); +#282378 = SURFACE_STYLE_FILL_AREA(#282379); +#282379 = FILL_AREA_STYLE('',(#282380)); +#282380 = FILL_AREA_STYLE_COLOUR('',#280691); +#282381 = OVER_RIDING_STYLED_ITEM('overriding color',(#282382),#80781, + #282337); +#282382 = PRESENTATION_STYLE_ASSIGNMENT((#282383)); +#282383 = SURFACE_STYLE_USAGE(.BOTH.,#282384); +#282384 = SURFACE_SIDE_STYLE('',(#282385)); +#282385 = SURFACE_STYLE_FILL_AREA(#282386); +#282386 = FILL_AREA_STYLE('',(#282387)); +#282387 = FILL_AREA_STYLE_COLOUR('',#280691); +#282388 = OVER_RIDING_STYLED_ITEM('overriding color',(#282389),#80805, + #282337); +#282389 = PRESENTATION_STYLE_ASSIGNMENT((#282390)); +#282390 = SURFACE_STYLE_USAGE(.BOTH.,#282391); +#282391 = SURFACE_SIDE_STYLE('',(#282392)); +#282392 = SURFACE_STYLE_FILL_AREA(#282393); +#282393 = FILL_AREA_STYLE('',(#282394)); +#282394 = FILL_AREA_STYLE_COLOUR('',#280691); +#282395 = OVER_RIDING_STYLED_ITEM('overriding color',(#282396),#80822, + #282337); +#282396 = PRESENTATION_STYLE_ASSIGNMENT((#282397)); +#282397 = SURFACE_STYLE_USAGE(.BOTH.,#282398); +#282398 = SURFACE_SIDE_STYLE('',(#282399)); +#282399 = SURFACE_STYLE_FILL_AREA(#282400); +#282400 = FILL_AREA_STYLE('',(#282401)); +#282401 = FILL_AREA_STYLE_COLOUR('',#280691); +#282402 = STYLED_ITEM('color',(#282403),#80836); +#282403 = PRESENTATION_STYLE_ASSIGNMENT((#282404,#282409)); +#282404 = SURFACE_STYLE_USAGE(.BOTH.,#282405); +#282405 = SURFACE_SIDE_STYLE('',(#282406)); +#282406 = SURFACE_STYLE_FILL_AREA(#282407); +#282407 = FILL_AREA_STYLE('',(#282408)); +#282408 = FILL_AREA_STYLE_COLOUR('',#278623); +#282409 = CURVE_STYLE('',#282410,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282410 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282411 = OVER_RIDING_STYLED_ITEM('overriding color',(#282412),#80838, + #282402); +#282412 = PRESENTATION_STYLE_ASSIGNMENT((#282413)); +#282413 = SURFACE_STYLE_USAGE(.BOTH.,#282414); +#282414 = SURFACE_SIDE_STYLE('',(#282415)); +#282415 = SURFACE_STYLE_FILL_AREA(#282416); +#282416 = FILL_AREA_STYLE('',(#282417)); +#282417 = FILL_AREA_STYLE_COLOUR('',#280691); +#282418 = OVER_RIDING_STYLED_ITEM('overriding color',(#282419),#80894, + #282402); +#282419 = PRESENTATION_STYLE_ASSIGNMENT((#282420)); +#282420 = SURFACE_STYLE_USAGE(.BOTH.,#282421); +#282421 = SURFACE_SIDE_STYLE('',(#282422)); +#282422 = SURFACE_STYLE_FILL_AREA(#282423); +#282423 = FILL_AREA_STYLE('',(#282424)); +#282424 = FILL_AREA_STYLE_COLOUR('',#280691); +#282425 = OVER_RIDING_STYLED_ITEM('overriding color',(#282426),#80925, + #282402); +#282426 = PRESENTATION_STYLE_ASSIGNMENT((#282427)); +#282427 = SURFACE_STYLE_USAGE(.BOTH.,#282428); +#282428 = SURFACE_SIDE_STYLE('',(#282429)); +#282429 = SURFACE_STYLE_FILL_AREA(#282430); +#282430 = FILL_AREA_STYLE('',(#282431)); +#282431 = FILL_AREA_STYLE_COLOUR('',#280691); +#282432 = OVER_RIDING_STYLED_ITEM('overriding color',(#282433),#80949, + #282402); +#282433 = PRESENTATION_STYLE_ASSIGNMENT((#282434)); +#282434 = SURFACE_STYLE_USAGE(.BOTH.,#282435); +#282435 = SURFACE_SIDE_STYLE('',(#282436)); +#282436 = SURFACE_STYLE_FILL_AREA(#282437); +#282437 = FILL_AREA_STYLE('',(#282438)); +#282438 = FILL_AREA_STYLE_COLOUR('',#280691); +#282439 = OVER_RIDING_STYLED_ITEM('overriding color',(#282440),#80973, + #282402); +#282440 = PRESENTATION_STYLE_ASSIGNMENT((#282441)); +#282441 = SURFACE_STYLE_USAGE(.BOTH.,#282442); +#282442 = SURFACE_SIDE_STYLE('',(#282443)); +#282443 = SURFACE_STYLE_FILL_AREA(#282444); +#282444 = FILL_AREA_STYLE('',(#282445)); +#282445 = FILL_AREA_STYLE_COLOUR('',#280691); +#282446 = OVER_RIDING_STYLED_ITEM('overriding color',(#282447),#80997, + #282402); +#282447 = PRESENTATION_STYLE_ASSIGNMENT((#282448)); +#282448 = SURFACE_STYLE_USAGE(.BOTH.,#282449); +#282449 = SURFACE_SIDE_STYLE('',(#282450)); +#282450 = SURFACE_STYLE_FILL_AREA(#282451); +#282451 = FILL_AREA_STYLE('',(#282452)); +#282452 = FILL_AREA_STYLE_COLOUR('',#280691); +#282453 = OVER_RIDING_STYLED_ITEM('overriding color',(#282454),#81021, + #282402); +#282454 = PRESENTATION_STYLE_ASSIGNMENT((#282455)); +#282455 = SURFACE_STYLE_USAGE(.BOTH.,#282456); +#282456 = SURFACE_SIDE_STYLE('',(#282457)); +#282457 = SURFACE_STYLE_FILL_AREA(#282458); +#282458 = FILL_AREA_STYLE('',(#282459)); +#282459 = FILL_AREA_STYLE_COLOUR('',#280691); +#282460 = OVER_RIDING_STYLED_ITEM('overriding color',(#282461),#81038, + #282402); +#282461 = PRESENTATION_STYLE_ASSIGNMENT((#282462)); +#282462 = SURFACE_STYLE_USAGE(.BOTH.,#282463); +#282463 = SURFACE_SIDE_STYLE('',(#282464)); +#282464 = SURFACE_STYLE_FILL_AREA(#282465); +#282465 = FILL_AREA_STYLE('',(#282466)); +#282466 = FILL_AREA_STYLE_COLOUR('',#280691); +#282467 = STYLED_ITEM('color',(#282468),#81052); +#282468 = PRESENTATION_STYLE_ASSIGNMENT((#282469,#282474)); +#282469 = SURFACE_STYLE_USAGE(.BOTH.,#282470); +#282470 = SURFACE_SIDE_STYLE('',(#282471)); +#282471 = SURFACE_STYLE_FILL_AREA(#282472); +#282472 = FILL_AREA_STYLE('',(#282473)); +#282473 = FILL_AREA_STYLE_COLOUR('',#278623); +#282474 = CURVE_STYLE('',#282475,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#282475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282476 = OVER_RIDING_STYLED_ITEM('overriding color',(#282477),#81054, + #282467); +#282477 = PRESENTATION_STYLE_ASSIGNMENT((#282478)); +#282478 = SURFACE_STYLE_USAGE(.BOTH.,#282479); +#282479 = SURFACE_SIDE_STYLE('',(#282480)); +#282480 = SURFACE_STYLE_FILL_AREA(#282481); +#282481 = FILL_AREA_STYLE('',(#282482)); +#282482 = FILL_AREA_STYLE_COLOUR('',#280691); +#282483 = OVER_RIDING_STYLED_ITEM('overriding color',(#282484),#81110, + #282467); +#282484 = PRESENTATION_STYLE_ASSIGNMENT((#282485)); +#282485 = SURFACE_STYLE_USAGE(.BOTH.,#282486); +#282486 = SURFACE_SIDE_STYLE('',(#282487)); +#282487 = SURFACE_STYLE_FILL_AREA(#282488); +#282488 = FILL_AREA_STYLE('',(#282489)); +#282489 = FILL_AREA_STYLE_COLOUR('',#280691); +#282490 = OVER_RIDING_STYLED_ITEM('overriding color',(#282491),#81141, + #282467); +#282491 = PRESENTATION_STYLE_ASSIGNMENT((#282492)); +#282492 = SURFACE_STYLE_USAGE(.BOTH.,#282493); +#282493 = SURFACE_SIDE_STYLE('',(#282494)); +#282494 = SURFACE_STYLE_FILL_AREA(#282495); +#282495 = FILL_AREA_STYLE('',(#282496)); +#282496 = FILL_AREA_STYLE_COLOUR('',#280691); +#282497 = OVER_RIDING_STYLED_ITEM('overriding color',(#282498),#81165, + #282467); +#282498 = PRESENTATION_STYLE_ASSIGNMENT((#282499)); +#282499 = SURFACE_STYLE_USAGE(.BOTH.,#282500); +#282500 = SURFACE_SIDE_STYLE('',(#282501)); +#282501 = SURFACE_STYLE_FILL_AREA(#282502); +#282502 = FILL_AREA_STYLE('',(#282503)); +#282503 = FILL_AREA_STYLE_COLOUR('',#280691); +#282504 = OVER_RIDING_STYLED_ITEM('overriding color',(#282505),#81189, + #282467); +#282505 = PRESENTATION_STYLE_ASSIGNMENT((#282506)); +#282506 = SURFACE_STYLE_USAGE(.BOTH.,#282507); +#282507 = SURFACE_SIDE_STYLE('',(#282508)); +#282508 = SURFACE_STYLE_FILL_AREA(#282509); +#282509 = FILL_AREA_STYLE('',(#282510)); +#282510 = FILL_AREA_STYLE_COLOUR('',#280691); +#282511 = OVER_RIDING_STYLED_ITEM('overriding color',(#282512),#81213, + #282467); +#282512 = PRESENTATION_STYLE_ASSIGNMENT((#282513)); +#282513 = SURFACE_STYLE_USAGE(.BOTH.,#282514); +#282514 = SURFACE_SIDE_STYLE('',(#282515)); +#282515 = SURFACE_STYLE_FILL_AREA(#282516); +#282516 = FILL_AREA_STYLE('',(#282517)); +#282517 = FILL_AREA_STYLE_COLOUR('',#280691); +#282518 = OVER_RIDING_STYLED_ITEM('overriding color',(#282519),#81237, + #282467); +#282519 = PRESENTATION_STYLE_ASSIGNMENT((#282520)); +#282520 = SURFACE_STYLE_USAGE(.BOTH.,#282521); +#282521 = SURFACE_SIDE_STYLE('',(#282522)); +#282522 = SURFACE_STYLE_FILL_AREA(#282523); +#282523 = FILL_AREA_STYLE('',(#282524)); +#282524 = FILL_AREA_STYLE_COLOUR('',#280691); +#282525 = OVER_RIDING_STYLED_ITEM('overriding color',(#282526),#81254, + #282467); +#282526 = PRESENTATION_STYLE_ASSIGNMENT((#282527)); +#282527 = SURFACE_STYLE_USAGE(.BOTH.,#282528); +#282528 = SURFACE_SIDE_STYLE('',(#282529)); +#282529 = SURFACE_STYLE_FILL_AREA(#282530); +#282530 = FILL_AREA_STYLE('',(#282531)); +#282531 = FILL_AREA_STYLE_COLOUR('',#280691); +#282532 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #282533,#282541,#282548,#282555,#282562,#282569,#282576,#282583, + #282590,#282597,#282604,#282611,#282618,#282625,#282632,#282639, + #282646,#282653,#282660,#282667,#282674,#282681,#282688,#282695, + #282702,#282709,#282716,#282723,#282730,#282737,#282744,#282751, + #282758,#282765,#282772,#282779,#282786,#282793,#282800,#282807, + #282814,#282821,#282828,#282835,#282842,#282849,#282856,#282863, + #282870,#282877,#282884,#282891,#282898,#282906),#58658); +#282533 = STYLED_ITEM('color',(#282534),#56031); +#282534 = PRESENTATION_STYLE_ASSIGNMENT((#282535)); +#282535 = SURFACE_STYLE_USAGE(.BOTH.,#282536); +#282536 = SURFACE_SIDE_STYLE('',(#282537)); +#282537 = SURFACE_STYLE_FILL_AREA(#282538); +#282538 = FILL_AREA_STYLE('',(#282539)); +#282539 = FILL_AREA_STYLE_COLOUR('',#282540); +#282540 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244); +#282541 = STYLED_ITEM('color',(#282542),#56071); +#282542 = PRESENTATION_STYLE_ASSIGNMENT((#282543)); +#282543 = SURFACE_STYLE_USAGE(.BOTH.,#282544); +#282544 = SURFACE_SIDE_STYLE('',(#282545)); +#282545 = SURFACE_STYLE_FILL_AREA(#282546); +#282546 = FILL_AREA_STYLE('',(#282547)); +#282547 = FILL_AREA_STYLE_COLOUR('',#282540); +#282548 = STYLED_ITEM('color',(#282549),#56102); +#282549 = PRESENTATION_STYLE_ASSIGNMENT((#282550)); +#282550 = SURFACE_STYLE_USAGE(.BOTH.,#282551); +#282551 = SURFACE_SIDE_STYLE('',(#282552)); +#282552 = SURFACE_STYLE_FILL_AREA(#282553); +#282553 = FILL_AREA_STYLE('',(#282554)); +#282554 = FILL_AREA_STYLE_COLOUR('',#282540); +#282555 = STYLED_ITEM('color',(#282556),#56232); +#282556 = PRESENTATION_STYLE_ASSIGNMENT((#282557)); +#282557 = SURFACE_STYLE_USAGE(.BOTH.,#282558); +#282558 = SURFACE_SIDE_STYLE('',(#282559)); +#282559 = SURFACE_STYLE_FILL_AREA(#282560); +#282560 = FILL_AREA_STYLE('',(#282561)); +#282561 = FILL_AREA_STYLE_COLOUR('',#282540); +#282562 = STYLED_ITEM('color',(#282563),#56256); +#282563 = PRESENTATION_STYLE_ASSIGNMENT((#282564)); +#282564 = SURFACE_STYLE_USAGE(.BOTH.,#282565); +#282565 = SURFACE_SIDE_STYLE('',(#282566)); +#282566 = SURFACE_STYLE_FILL_AREA(#282567); +#282567 = FILL_AREA_STYLE('',(#282568)); +#282568 = FILL_AREA_STYLE_COLOUR('',#282540); +#282569 = STYLED_ITEM('color',(#282570),#56379); +#282570 = PRESENTATION_STYLE_ASSIGNMENT((#282571)); +#282571 = SURFACE_STYLE_USAGE(.BOTH.,#282572); +#282572 = SURFACE_SIDE_STYLE('',(#282573)); +#282573 = SURFACE_STYLE_FILL_AREA(#282574); +#282574 = FILL_AREA_STYLE('',(#282575)); +#282575 = FILL_AREA_STYLE_COLOUR('',#279624); +#282576 = STYLED_ITEM('color',(#282577),#56506); +#282577 = PRESENTATION_STYLE_ASSIGNMENT((#282578)); +#282578 = SURFACE_STYLE_USAGE(.BOTH.,#282579); +#282579 = SURFACE_SIDE_STYLE('',(#282580)); +#282580 = SURFACE_STYLE_FILL_AREA(#282581); +#282581 = FILL_AREA_STYLE('',(#282582)); +#282582 = FILL_AREA_STYLE_COLOUR('',#282540); +#282583 = STYLED_ITEM('color',(#282584),#56523); +#282584 = PRESENTATION_STYLE_ASSIGNMENT((#282585)); +#282585 = SURFACE_STYLE_USAGE(.BOTH.,#282586); +#282586 = SURFACE_SIDE_STYLE('',(#282587)); +#282587 = SURFACE_STYLE_FILL_AREA(#282588); +#282588 = FILL_AREA_STYLE('',(#282589)); +#282589 = FILL_AREA_STYLE_COLOUR('',#279624); +#282590 = STYLED_ITEM('color',(#282591),#56546); +#282591 = PRESENTATION_STYLE_ASSIGNMENT((#282592)); +#282592 = SURFACE_STYLE_USAGE(.BOTH.,#282593); +#282593 = SURFACE_SIDE_STYLE('',(#282594)); +#282594 = SURFACE_STYLE_FILL_AREA(#282595); +#282595 = FILL_AREA_STYLE('',(#282596)); +#282596 = FILL_AREA_STYLE_COLOUR('',#279624); +#282597 = STYLED_ITEM('color',(#282598),#56668); +#282598 = PRESENTATION_STYLE_ASSIGNMENT((#282599)); +#282599 = SURFACE_STYLE_USAGE(.BOTH.,#282600); +#282600 = SURFACE_SIDE_STYLE('',(#282601)); +#282601 = SURFACE_STYLE_FILL_AREA(#282602); +#282602 = FILL_AREA_STYLE('',(#282603)); +#282603 = FILL_AREA_STYLE_COLOUR('',#279624); +#282604 = STYLED_ITEM('color',(#282605),#56796); +#282605 = PRESENTATION_STYLE_ASSIGNMENT((#282606)); +#282606 = SURFACE_STYLE_USAGE(.BOTH.,#282607); +#282607 = SURFACE_SIDE_STYLE('',(#282608)); +#282608 = SURFACE_STYLE_FILL_AREA(#282609); +#282609 = FILL_AREA_STYLE('',(#282610)); +#282610 = FILL_AREA_STYLE_COLOUR('',#279624); +#282611 = STYLED_ITEM('color',(#282612),#56813); +#282612 = PRESENTATION_STYLE_ASSIGNMENT((#282613)); +#282613 = SURFACE_STYLE_USAGE(.BOTH.,#282614); +#282614 = SURFACE_SIDE_STYLE('',(#282615)); +#282615 = SURFACE_STYLE_FILL_AREA(#282616); +#282616 = FILL_AREA_STYLE('',(#282617)); +#282617 = FILL_AREA_STYLE_COLOUR('',#282540); +#282618 = STYLED_ITEM('color',(#282619),#56844); +#282619 = PRESENTATION_STYLE_ASSIGNMENT((#282620)); +#282620 = SURFACE_STYLE_USAGE(.BOTH.,#282621); +#282621 = SURFACE_SIDE_STYLE('',(#282622)); +#282622 = SURFACE_STYLE_FILL_AREA(#282623); +#282623 = FILL_AREA_STYLE('',(#282624)); +#282624 = FILL_AREA_STYLE_COLOUR('',#279624); +#282625 = STYLED_ITEM('color',(#282626),#57071); +#282626 = PRESENTATION_STYLE_ASSIGNMENT((#282627)); +#282627 = SURFACE_STYLE_USAGE(.BOTH.,#282628); +#282628 = SURFACE_SIDE_STYLE('',(#282629)); +#282629 = SURFACE_STYLE_FILL_AREA(#282630); +#282630 = FILL_AREA_STYLE('',(#282631)); +#282631 = FILL_AREA_STYLE_COLOUR('',#282540); +#282632 = STYLED_ITEM('color',(#282633),#57102); +#282633 = PRESENTATION_STYLE_ASSIGNMENT((#282634)); +#282634 = SURFACE_STYLE_USAGE(.BOTH.,#282635); +#282635 = SURFACE_SIDE_STYLE('',(#282636)); +#282636 = SURFACE_STYLE_FILL_AREA(#282637); +#282637 = FILL_AREA_STYLE('',(#282638)); +#282638 = FILL_AREA_STYLE_COLOUR('',#279624); +#282639 = STYLED_ITEM('color',(#282640),#57329); +#282640 = PRESENTATION_STYLE_ASSIGNMENT((#282641)); +#282641 = SURFACE_STYLE_USAGE(.BOTH.,#282642); +#282642 = SURFACE_SIDE_STYLE('',(#282643)); +#282643 = SURFACE_STYLE_FILL_AREA(#282644); +#282644 = FILL_AREA_STYLE('',(#282645)); +#282645 = FILL_AREA_STYLE_COLOUR('',#282540); +#282646 = STYLED_ITEM('color',(#282647),#57360); +#282647 = PRESENTATION_STYLE_ASSIGNMENT((#282648)); +#282648 = SURFACE_STYLE_USAGE(.BOTH.,#282649); +#282649 = SURFACE_SIDE_STYLE('',(#282650)); +#282650 = SURFACE_STYLE_FILL_AREA(#282651); +#282651 = FILL_AREA_STYLE('',(#282652)); +#282652 = FILL_AREA_STYLE_COLOUR('',#282540); +#282653 = STYLED_ITEM('color',(#282654),#57391); +#282654 = PRESENTATION_STYLE_ASSIGNMENT((#282655)); +#282655 = SURFACE_STYLE_USAGE(.BOTH.,#282656); +#282656 = SURFACE_SIDE_STYLE('',(#282657)); +#282657 = SURFACE_STYLE_FILL_AREA(#282658); +#282658 = FILL_AREA_STYLE('',(#282659)); +#282659 = FILL_AREA_STYLE_COLOUR('',#279624); +#282660 = STYLED_ITEM('color',(#282661),#57618); +#282661 = PRESENTATION_STYLE_ASSIGNMENT((#282662)); +#282662 = SURFACE_STYLE_USAGE(.BOTH.,#282663); +#282663 = SURFACE_SIDE_STYLE('',(#282664)); +#282664 = SURFACE_STYLE_FILL_AREA(#282665); +#282665 = FILL_AREA_STYLE('',(#282666)); +#282666 = FILL_AREA_STYLE_COLOUR('',#279624); +#282667 = STYLED_ITEM('color',(#282668),#57746); +#282668 = PRESENTATION_STYLE_ASSIGNMENT((#282669)); +#282669 = SURFACE_STYLE_USAGE(.BOTH.,#282670); +#282670 = SURFACE_SIDE_STYLE('',(#282671)); +#282671 = SURFACE_STYLE_FILL_AREA(#282672); +#282672 = FILL_AREA_STYLE('',(#282673)); +#282673 = FILL_AREA_STYLE_COLOUR('',#282540); +#282674 = STYLED_ITEM('color',(#282675),#57777); +#282675 = PRESENTATION_STYLE_ASSIGNMENT((#282676)); +#282676 = SURFACE_STYLE_USAGE(.BOTH.,#282677); +#282677 = SURFACE_SIDE_STYLE('',(#282678)); +#282678 = SURFACE_STYLE_FILL_AREA(#282679); +#282679 = FILL_AREA_STYLE('',(#282680)); +#282680 = FILL_AREA_STYLE_COLOUR('',#279624); +#282681 = STYLED_ITEM('color',(#282682),#57800); +#282682 = PRESENTATION_STYLE_ASSIGNMENT((#282683)); +#282683 = SURFACE_STYLE_USAGE(.BOTH.,#282684); +#282684 = SURFACE_SIDE_STYLE('',(#282685)); +#282685 = SURFACE_STYLE_FILL_AREA(#282686); +#282686 = FILL_AREA_STYLE('',(#282687)); +#282687 = FILL_AREA_STYLE_COLOUR('',#279624); +#282688 = STYLED_ITEM('color',(#282689),#57922); +#282689 = PRESENTATION_STYLE_ASSIGNMENT((#282690)); +#282690 = SURFACE_STYLE_USAGE(.BOTH.,#282691); +#282691 = SURFACE_SIDE_STYLE('',(#282692)); +#282692 = SURFACE_STYLE_FILL_AREA(#282693); +#282693 = FILL_AREA_STYLE('',(#282694)); +#282694 = FILL_AREA_STYLE_COLOUR('',#279624); +#282695 = STYLED_ITEM('color',(#282696),#57967); +#282696 = PRESENTATION_STYLE_ASSIGNMENT((#282697)); +#282697 = SURFACE_STYLE_USAGE(.BOTH.,#282698); +#282698 = SURFACE_SIDE_STYLE('',(#282699)); +#282699 = SURFACE_STYLE_FILL_AREA(#282700); +#282700 = FILL_AREA_STYLE('',(#282701)); +#282701 = FILL_AREA_STYLE_COLOUR('',#282540); +#282702 = STYLED_ITEM('color',(#282703),#57999); +#282703 = PRESENTATION_STYLE_ASSIGNMENT((#282704)); +#282704 = SURFACE_STYLE_USAGE(.BOTH.,#282705); +#282705 = SURFACE_SIDE_STYLE('',(#282706)); +#282706 = SURFACE_STYLE_FILL_AREA(#282707); +#282707 = FILL_AREA_STYLE('',(#282708)); +#282708 = FILL_AREA_STYLE_COLOUR('',#279624); +#282709 = STYLED_ITEM('color',(#282710),#58049); +#282710 = PRESENTATION_STYLE_ASSIGNMENT((#282711)); +#282711 = SURFACE_STYLE_USAGE(.BOTH.,#282712); +#282712 = SURFACE_SIDE_STYLE('',(#282713)); +#282713 = SURFACE_STYLE_FILL_AREA(#282714); +#282714 = FILL_AREA_STYLE('',(#282715)); +#282715 = FILL_AREA_STYLE_COLOUR('',#282540); +#282716 = STYLED_ITEM('color',(#282717),#58081); +#282717 = PRESENTATION_STYLE_ASSIGNMENT((#282718)); +#282718 = SURFACE_STYLE_USAGE(.BOTH.,#282719); +#282719 = SURFACE_SIDE_STYLE('',(#282720)); +#282720 = SURFACE_STYLE_FILL_AREA(#282721); +#282721 = FILL_AREA_STYLE('',(#282722)); +#282722 = FILL_AREA_STYLE_COLOUR('',#279624); +#282723 = STYLED_ITEM('color',(#282724),#58098); +#282724 = PRESENTATION_STYLE_ASSIGNMENT((#282725)); +#282725 = SURFACE_STYLE_USAGE(.BOTH.,#282726); +#282726 = SURFACE_SIDE_STYLE('',(#282727)); +#282727 = SURFACE_STYLE_FILL_AREA(#282728); +#282728 = FILL_AREA_STYLE('',(#282729)); +#282729 = FILL_AREA_STYLE_COLOUR('',#282540); +#282730 = STYLED_ITEM('color',(#282731),#58130); +#282731 = PRESENTATION_STYLE_ASSIGNMENT((#282732)); +#282732 = SURFACE_STYLE_USAGE(.BOTH.,#282733); +#282733 = SURFACE_SIDE_STYLE('',(#282734)); +#282734 = SURFACE_STYLE_FILL_AREA(#282735); +#282735 = FILL_AREA_STYLE('',(#282736)); +#282736 = FILL_AREA_STYLE_COLOUR('',#282540); +#282737 = STYLED_ITEM('color',(#282738),#58147); +#282738 = PRESENTATION_STYLE_ASSIGNMENT((#282739)); +#282739 = SURFACE_STYLE_USAGE(.BOTH.,#282740); +#282740 = SURFACE_SIDE_STYLE('',(#282741)); +#282741 = SURFACE_STYLE_FILL_AREA(#282742); +#282742 = FILL_AREA_STYLE('',(#282743)); +#282743 = FILL_AREA_STYLE_COLOUR('',#282540); +#282744 = STYLED_ITEM('color',(#282745),#58179); +#282745 = PRESENTATION_STYLE_ASSIGNMENT((#282746)); +#282746 = SURFACE_STYLE_USAGE(.BOTH.,#282747); +#282747 = SURFACE_SIDE_STYLE('',(#282748)); +#282748 = SURFACE_STYLE_FILL_AREA(#282749); +#282749 = FILL_AREA_STYLE('',(#282750)); +#282750 = FILL_AREA_STYLE_COLOUR('',#282540); +#282751 = STYLED_ITEM('color',(#282752),#58211); +#282752 = PRESENTATION_STYLE_ASSIGNMENT((#282753)); +#282753 = SURFACE_STYLE_USAGE(.BOTH.,#282754); +#282754 = SURFACE_SIDE_STYLE('',(#282755)); +#282755 = SURFACE_STYLE_FILL_AREA(#282756); +#282756 = FILL_AREA_STYLE('',(#282757)); +#282757 = FILL_AREA_STYLE_COLOUR('',#282540); +#282758 = STYLED_ITEM('color',(#282759),#58228); +#282759 = PRESENTATION_STYLE_ASSIGNMENT((#282760)); +#282760 = SURFACE_STYLE_USAGE(.BOTH.,#282761); +#282761 = SURFACE_SIDE_STYLE('',(#282762)); +#282762 = SURFACE_STYLE_FILL_AREA(#282763); +#282763 = FILL_AREA_STYLE('',(#282764)); +#282764 = FILL_AREA_STYLE_COLOUR('',#282540); +#282765 = STYLED_ITEM('color',(#282766),#58260); +#282766 = PRESENTATION_STYLE_ASSIGNMENT((#282767)); +#282767 = SURFACE_STYLE_USAGE(.BOTH.,#282768); +#282768 = SURFACE_SIDE_STYLE('',(#282769)); +#282769 = SURFACE_STYLE_FILL_AREA(#282770); +#282770 = FILL_AREA_STYLE('',(#282771)); +#282771 = FILL_AREA_STYLE_COLOUR('',#282540); +#282772 = STYLED_ITEM('color',(#282773),#58292); +#282773 = PRESENTATION_STYLE_ASSIGNMENT((#282774)); +#282774 = SURFACE_STYLE_USAGE(.BOTH.,#282775); +#282775 = SURFACE_SIDE_STYLE('',(#282776)); +#282776 = SURFACE_STYLE_FILL_AREA(#282777); +#282777 = FILL_AREA_STYLE('',(#282778)); +#282778 = FILL_AREA_STYLE_COLOUR('',#282540); +#282779 = STYLED_ITEM('color',(#282780),#58309); +#282780 = PRESENTATION_STYLE_ASSIGNMENT((#282781)); +#282781 = SURFACE_STYLE_USAGE(.BOTH.,#282782); +#282782 = SURFACE_SIDE_STYLE('',(#282783)); +#282783 = SURFACE_STYLE_FILL_AREA(#282784); +#282784 = FILL_AREA_STYLE('',(#282785)); +#282785 = FILL_AREA_STYLE_COLOUR('',#282540); +#282786 = STYLED_ITEM('color',(#282787),#58341); +#282787 = PRESENTATION_STYLE_ASSIGNMENT((#282788)); +#282788 = SURFACE_STYLE_USAGE(.BOTH.,#282789); +#282789 = SURFACE_SIDE_STYLE('',(#282790)); +#282790 = SURFACE_STYLE_FILL_AREA(#282791); +#282791 = FILL_AREA_STYLE('',(#282792)); +#282792 = FILL_AREA_STYLE_COLOUR('',#282540); +#282793 = STYLED_ITEM('color',(#282794),#58358); +#282794 = PRESENTATION_STYLE_ASSIGNMENT((#282795)); +#282795 = SURFACE_STYLE_USAGE(.BOTH.,#282796); +#282796 = SURFACE_SIDE_STYLE('',(#282797)); +#282797 = SURFACE_STYLE_FILL_AREA(#282798); +#282798 = FILL_AREA_STYLE('',(#282799)); +#282799 = FILL_AREA_STYLE_COLOUR('',#282540); +#282800 = STYLED_ITEM('color',(#282801),#58390); +#282801 = PRESENTATION_STYLE_ASSIGNMENT((#282802)); +#282802 = SURFACE_STYLE_USAGE(.BOTH.,#282803); +#282803 = SURFACE_SIDE_STYLE('',(#282804)); +#282804 = SURFACE_STYLE_FILL_AREA(#282805); +#282805 = FILL_AREA_STYLE('',(#282806)); +#282806 = FILL_AREA_STYLE_COLOUR('',#282540); +#282807 = STYLED_ITEM('color',(#282808),#58422); +#282808 = PRESENTATION_STYLE_ASSIGNMENT((#282809)); +#282809 = SURFACE_STYLE_USAGE(.BOTH.,#282810); +#282810 = SURFACE_SIDE_STYLE('',(#282811)); +#282811 = SURFACE_STYLE_FILL_AREA(#282812); +#282812 = FILL_AREA_STYLE('',(#282813)); +#282813 = FILL_AREA_STYLE_COLOUR('',#282540); +#282814 = STYLED_ITEM('color',(#282815),#58439); +#282815 = PRESENTATION_STYLE_ASSIGNMENT((#282816)); +#282816 = SURFACE_STYLE_USAGE(.BOTH.,#282817); +#282817 = SURFACE_SIDE_STYLE('',(#282818)); +#282818 = SURFACE_STYLE_FILL_AREA(#282819); +#282819 = FILL_AREA_STYLE('',(#282820)); +#282820 = FILL_AREA_STYLE_COLOUR('',#279624); +#282821 = STYLED_ITEM('color',(#282822),#58456); +#282822 = PRESENTATION_STYLE_ASSIGNMENT((#282823)); +#282823 = SURFACE_STYLE_USAGE(.BOTH.,#282824); +#282824 = SURFACE_SIDE_STYLE('',(#282825)); +#282825 = SURFACE_STYLE_FILL_AREA(#282826); +#282826 = FILL_AREA_STYLE('',(#282827)); +#282827 = FILL_AREA_STYLE_COLOUR('',#282540); +#282828 = STYLED_ITEM('color',(#282829),#58473); +#282829 = PRESENTATION_STYLE_ASSIGNMENT((#282830)); +#282830 = SURFACE_STYLE_USAGE(.BOTH.,#282831); +#282831 = SURFACE_SIDE_STYLE('',(#282832)); +#282832 = SURFACE_STYLE_FILL_AREA(#282833); +#282833 = FILL_AREA_STYLE('',(#282834)); +#282834 = FILL_AREA_STYLE_COLOUR('',#279624); +#282835 = STYLED_ITEM('color',(#282836),#58496); +#282836 = PRESENTATION_STYLE_ASSIGNMENT((#282837)); +#282837 = SURFACE_STYLE_USAGE(.BOTH.,#282838); +#282838 = SURFACE_SIDE_STYLE('',(#282839)); +#282839 = SURFACE_STYLE_FILL_AREA(#282840); +#282840 = FILL_AREA_STYLE('',(#282841)); +#282841 = FILL_AREA_STYLE_COLOUR('',#282540); +#282842 = STYLED_ITEM('color',(#282843),#58513); +#282843 = PRESENTATION_STYLE_ASSIGNMENT((#282844)); +#282844 = SURFACE_STYLE_USAGE(.BOTH.,#282845); +#282845 = SURFACE_SIDE_STYLE('',(#282846)); +#282846 = SURFACE_STYLE_FILL_AREA(#282847); +#282847 = FILL_AREA_STYLE('',(#282848)); +#282848 = FILL_AREA_STYLE_COLOUR('',#282540); +#282849 = STYLED_ITEM('color',(#282850),#58525); +#282850 = PRESENTATION_STYLE_ASSIGNMENT((#282851)); +#282851 = SURFACE_STYLE_USAGE(.BOTH.,#282852); +#282852 = SURFACE_SIDE_STYLE('',(#282853)); +#282853 = SURFACE_STYLE_FILL_AREA(#282854); +#282854 = FILL_AREA_STYLE('',(#282855)); +#282855 = FILL_AREA_STYLE_COLOUR('',#282540); +#282856 = STYLED_ITEM('color',(#282857),#58542); +#282857 = PRESENTATION_STYLE_ASSIGNMENT((#282858)); +#282858 = SURFACE_STYLE_USAGE(.BOTH.,#282859); +#282859 = SURFACE_SIDE_STYLE('',(#282860)); +#282860 = SURFACE_STYLE_FILL_AREA(#282861); +#282861 = FILL_AREA_STYLE('',(#282862)); +#282862 = FILL_AREA_STYLE_COLOUR('',#282540); +#282863 = STYLED_ITEM('color',(#282864),#58559); +#282864 = PRESENTATION_STYLE_ASSIGNMENT((#282865)); +#282865 = SURFACE_STYLE_USAGE(.BOTH.,#282866); +#282866 = SURFACE_SIDE_STYLE('',(#282867)); +#282867 = SURFACE_STYLE_FILL_AREA(#282868); +#282868 = FILL_AREA_STYLE('',(#282869)); +#282869 = FILL_AREA_STYLE_COLOUR('',#282540); +#282870 = STYLED_ITEM('color',(#282871),#58576); +#282871 = PRESENTATION_STYLE_ASSIGNMENT((#282872)); +#282872 = SURFACE_STYLE_USAGE(.BOTH.,#282873); +#282873 = SURFACE_SIDE_STYLE('',(#282874)); +#282874 = SURFACE_STYLE_FILL_AREA(#282875); +#282875 = FILL_AREA_STYLE('',(#282876)); +#282876 = FILL_AREA_STYLE_COLOUR('',#282540); +#282877 = STYLED_ITEM('color',(#282878),#58588); +#282878 = PRESENTATION_STYLE_ASSIGNMENT((#282879)); +#282879 = SURFACE_STYLE_USAGE(.BOTH.,#282880); +#282880 = SURFACE_SIDE_STYLE('',(#282881)); +#282881 = SURFACE_STYLE_FILL_AREA(#282882); +#282882 = FILL_AREA_STYLE('',(#282883)); +#282883 = FILL_AREA_STYLE_COLOUR('',#282540); +#282884 = STYLED_ITEM('color',(#282885),#58600); +#282885 = PRESENTATION_STYLE_ASSIGNMENT((#282886)); +#282886 = SURFACE_STYLE_USAGE(.BOTH.,#282887); +#282887 = SURFACE_SIDE_STYLE('',(#282888)); +#282888 = SURFACE_STYLE_FILL_AREA(#282889); +#282889 = FILL_AREA_STYLE('',(#282890)); +#282890 = FILL_AREA_STYLE_COLOUR('',#282540); +#282891 = STYLED_ITEM('color',(#282892),#58612); +#282892 = PRESENTATION_STYLE_ASSIGNMENT((#282893)); +#282893 = SURFACE_STYLE_USAGE(.BOTH.,#282894); +#282894 = SURFACE_SIDE_STYLE('',(#282895)); +#282895 = SURFACE_STYLE_FILL_AREA(#282896); +#282896 = FILL_AREA_STYLE('',(#282897)); +#282897 = FILL_AREA_STYLE_COLOUR('',#282540); +#282898 = STYLED_ITEM('color',(#282899),#58624); +#282899 = PRESENTATION_STYLE_ASSIGNMENT((#282900)); +#282900 = SURFACE_STYLE_USAGE(.BOTH.,#282901); +#282901 = SURFACE_SIDE_STYLE('',(#282902)); +#282902 = SURFACE_STYLE_FILL_AREA(#282903); +#282903 = FILL_AREA_STYLE('',(#282904)); +#282904 = FILL_AREA_STYLE_COLOUR('',#282905); +#282905 = COLOUR_RGB('',0.690999977303,0.663999984767,0.597999987832); +#282906 = STYLED_ITEM('color',(#282907),#58649); +#282907 = PRESENTATION_STYLE_ASSIGNMENT((#282908)); +#282908 = SURFACE_STYLE_USAGE(.BOTH.,#282909); +#282909 = SURFACE_SIDE_STYLE('',(#282910)); +#282910 = SURFACE_STYLE_FILL_AREA(#282911); +#282911 = FILL_AREA_STYLE('',(#282912)); +#282912 = FILL_AREA_STYLE_COLOUR('',#282905); +#282913 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #282914),#96055); +#282914 = STYLED_ITEM('color',(#282915),#95713); +#282915 = PRESENTATION_STYLE_ASSIGNMENT((#282916)); +#282916 = SURFACE_STYLE_USAGE(.BOTH.,#282917); +#282917 = SURFACE_SIDE_STYLE('',(#282918)); +#282918 = SURFACE_STYLE_FILL_AREA(#282919); +#282919 = FILL_AREA_STYLE('',(#282920)); +#282920 = FILL_AREA_STYLE_COLOUR('',#279624); +#282921 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #282922,#282931,#282940,#282949,#282958,#282967,#282976,#282985, + #282994,#283003,#283012,#283021,#283030,#283039,#283048,#283057, + #283066,#283075,#283084,#283093,#283102,#283111,#283120,#283129, + #283138,#283147,#283156,#283165,#283174,#283183,#283192,#283201, + #283210,#283219,#283228,#283237,#283246,#283255,#283264,#283273, + #283282,#283291,#283300,#283309,#283318,#283327,#283336,#283345, + #283354,#283363,#283372,#283381,#283390,#283399,#283408,#283417, + #283426,#283435,#283444,#283453,#283462,#283471,#283480,#283489, + #283498,#283507,#283516,#283525,#283534),#38167); +#282922 = STYLED_ITEM('color',(#282923),#36187); +#282923 = PRESENTATION_STYLE_ASSIGNMENT((#282924,#282929)); +#282924 = SURFACE_STYLE_USAGE(.BOTH.,#282925); +#282925 = SURFACE_SIDE_STYLE('',(#282926)); +#282926 = SURFACE_STYLE_FILL_AREA(#282927); +#282927 = FILL_AREA_STYLE('',(#282928)); +#282928 = FILL_AREA_STYLE_COLOUR('',#279624); +#282929 = CURVE_STYLE('',#282930,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282931 = STYLED_ITEM('color',(#282932),#36225); +#282932 = PRESENTATION_STYLE_ASSIGNMENT((#282933,#282938)); +#282933 = SURFACE_STYLE_USAGE(.BOTH.,#282934); +#282934 = SURFACE_SIDE_STYLE('',(#282935)); +#282935 = SURFACE_STYLE_FILL_AREA(#282936); +#282936 = FILL_AREA_STYLE('',(#282937)); +#282937 = FILL_AREA_STYLE_COLOUR('',#279624); +#282938 = CURVE_STYLE('',#282939,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282940 = STYLED_ITEM('color',(#282941),#36288); +#282941 = PRESENTATION_STYLE_ASSIGNMENT((#282942,#282947)); +#282942 = SURFACE_STYLE_USAGE(.BOTH.,#282943); +#282943 = SURFACE_SIDE_STYLE('',(#282944)); +#282944 = SURFACE_STYLE_FILL_AREA(#282945); +#282945 = FILL_AREA_STYLE('',(#282946)); +#282946 = FILL_AREA_STYLE_COLOUR('',#279624); +#282947 = CURVE_STYLE('',#282948,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282949 = STYLED_ITEM('color',(#282950),#36311); +#282950 = PRESENTATION_STYLE_ASSIGNMENT((#282951,#282956)); +#282951 = SURFACE_STYLE_USAGE(.BOTH.,#282952); +#282952 = SURFACE_SIDE_STYLE('',(#282953)); +#282953 = SURFACE_STYLE_FILL_AREA(#282954); +#282954 = FILL_AREA_STYLE('',(#282955)); +#282955 = FILL_AREA_STYLE_COLOUR('',#279624); +#282956 = CURVE_STYLE('',#282957,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282958 = STYLED_ITEM('color',(#282959),#36340); +#282959 = PRESENTATION_STYLE_ASSIGNMENT((#282960,#282965)); +#282960 = SURFACE_STYLE_USAGE(.BOTH.,#282961); +#282961 = SURFACE_SIDE_STYLE('',(#282962)); +#282962 = SURFACE_STYLE_FILL_AREA(#282963); +#282963 = FILL_AREA_STYLE('',(#282964)); +#282964 = FILL_AREA_STYLE_COLOUR('',#279624); +#282965 = CURVE_STYLE('',#282966,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282967 = STYLED_ITEM('color',(#282968),#36363); +#282968 = PRESENTATION_STYLE_ASSIGNMENT((#282969,#282974)); +#282969 = SURFACE_STYLE_USAGE(.BOTH.,#282970); +#282970 = SURFACE_SIDE_STYLE('',(#282971)); +#282971 = SURFACE_STYLE_FILL_AREA(#282972); +#282972 = FILL_AREA_STYLE('',(#282973)); +#282973 = FILL_AREA_STYLE_COLOUR('',#279624); +#282974 = CURVE_STYLE('',#282975,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282976 = STYLED_ITEM('color',(#282977),#36418); +#282977 = PRESENTATION_STYLE_ASSIGNMENT((#282978,#282983)); +#282978 = SURFACE_STYLE_USAGE(.BOTH.,#282979); +#282979 = SURFACE_SIDE_STYLE('',(#282980)); +#282980 = SURFACE_STYLE_FILL_AREA(#282981); +#282981 = FILL_AREA_STYLE('',(#282982)); +#282982 = FILL_AREA_STYLE_COLOUR('',#279624); +#282983 = CURVE_STYLE('',#282984,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282985 = STYLED_ITEM('color',(#282986),#36457); +#282986 = PRESENTATION_STYLE_ASSIGNMENT((#282987,#282992)); +#282987 = SURFACE_STYLE_USAGE(.BOTH.,#282988); +#282988 = SURFACE_SIDE_STYLE('',(#282989)); +#282989 = SURFACE_STYLE_FILL_AREA(#282990); +#282990 = FILL_AREA_STYLE('',(#282991)); +#282991 = FILL_AREA_STYLE_COLOUR('',#279624); +#282992 = CURVE_STYLE('',#282993,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#282993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282994 = STYLED_ITEM('color',(#282995),#36480); +#282995 = PRESENTATION_STYLE_ASSIGNMENT((#282996,#283001)); +#282996 = SURFACE_STYLE_USAGE(.BOTH.,#282997); +#282997 = SURFACE_SIDE_STYLE('',(#282998)); +#282998 = SURFACE_STYLE_FILL_AREA(#282999); +#282999 = FILL_AREA_STYLE('',(#283000)); +#283000 = FILL_AREA_STYLE_COLOUR('',#279624); +#283001 = CURVE_STYLE('',#283002,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283003 = STYLED_ITEM('color',(#283004),#36503); +#283004 = PRESENTATION_STYLE_ASSIGNMENT((#283005,#283010)); +#283005 = SURFACE_STYLE_USAGE(.BOTH.,#283006); +#283006 = SURFACE_SIDE_STYLE('',(#283007)); +#283007 = SURFACE_STYLE_FILL_AREA(#283008); +#283008 = FILL_AREA_STYLE('',(#283009)); +#283009 = FILL_AREA_STYLE_COLOUR('',#279624); +#283010 = CURVE_STYLE('',#283011,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283012 = STYLED_ITEM('color',(#283013),#36520); +#283013 = PRESENTATION_STYLE_ASSIGNMENT((#283014,#283019)); +#283014 = SURFACE_STYLE_USAGE(.BOTH.,#283015); +#283015 = SURFACE_SIDE_STYLE('',(#283016)); +#283016 = SURFACE_STYLE_FILL_AREA(#283017); +#283017 = FILL_AREA_STYLE('',(#283018)); +#283018 = FILL_AREA_STYLE_COLOUR('',#279624); +#283019 = CURVE_STYLE('',#283020,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283021 = STYLED_ITEM('color',(#283022),#36543); +#283022 = PRESENTATION_STYLE_ASSIGNMENT((#283023,#283028)); +#283023 = SURFACE_STYLE_USAGE(.BOTH.,#283024); +#283024 = SURFACE_SIDE_STYLE('',(#283025)); +#283025 = SURFACE_STYLE_FILL_AREA(#283026); +#283026 = FILL_AREA_STYLE('',(#283027)); +#283027 = FILL_AREA_STYLE_COLOUR('',#279624); +#283028 = CURVE_STYLE('',#283029,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283030 = STYLED_ITEM('color',(#283031),#36631); +#283031 = PRESENTATION_STYLE_ASSIGNMENT((#283032,#283037)); +#283032 = SURFACE_STYLE_USAGE(.BOTH.,#283033); +#283033 = SURFACE_SIDE_STYLE('',(#283034)); +#283034 = SURFACE_STYLE_FILL_AREA(#283035); +#283035 = FILL_AREA_STYLE('',(#283036)); +#283036 = FILL_AREA_STYLE_COLOUR('',#279624); +#283037 = CURVE_STYLE('',#283038,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283039 = STYLED_ITEM('color',(#283040),#36647); +#283040 = PRESENTATION_STYLE_ASSIGNMENT((#283041,#283046)); +#283041 = SURFACE_STYLE_USAGE(.BOTH.,#283042); +#283042 = SURFACE_SIDE_STYLE('',(#283043)); +#283043 = SURFACE_STYLE_FILL_AREA(#283044); +#283044 = FILL_AREA_STYLE('',(#283045)); +#283045 = FILL_AREA_STYLE_COLOUR('',#279624); +#283046 = CURVE_STYLE('',#283047,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283048 = STYLED_ITEM('color',(#283049),#36677); +#283049 = PRESENTATION_STYLE_ASSIGNMENT((#283050,#283055)); +#283050 = SURFACE_STYLE_USAGE(.BOTH.,#283051); +#283051 = SURFACE_SIDE_STYLE('',(#283052)); +#283052 = SURFACE_STYLE_FILL_AREA(#283053); +#283053 = FILL_AREA_STYLE('',(#283054)); +#283054 = FILL_AREA_STYLE_COLOUR('',#282540); +#283055 = CURVE_STYLE('',#283056,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283057 = STYLED_ITEM('color',(#283058),#36710); +#283058 = PRESENTATION_STYLE_ASSIGNMENT((#283059,#283064)); +#283059 = SURFACE_STYLE_USAGE(.BOTH.,#283060); +#283060 = SURFACE_SIDE_STYLE('',(#283061)); +#283061 = SURFACE_STYLE_FILL_AREA(#283062); +#283062 = FILL_AREA_STYLE('',(#283063)); +#283063 = FILL_AREA_STYLE_COLOUR('',#279624); +#283064 = CURVE_STYLE('',#283065,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283066 = STYLED_ITEM('color',(#283067),#36741); +#283067 = PRESENTATION_STYLE_ASSIGNMENT((#283068,#283073)); +#283068 = SURFACE_STYLE_USAGE(.BOTH.,#283069); +#283069 = SURFACE_SIDE_STYLE('',(#283070)); +#283070 = SURFACE_STYLE_FILL_AREA(#283071); +#283071 = FILL_AREA_STYLE('',(#283072)); +#283072 = FILL_AREA_STYLE_COLOUR('',#282540); +#283073 = CURVE_STYLE('',#283074,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283075 = STYLED_ITEM('color',(#283076),#36774); +#283076 = PRESENTATION_STYLE_ASSIGNMENT((#283077,#283082)); +#283077 = SURFACE_STYLE_USAGE(.BOTH.,#283078); +#283078 = SURFACE_SIDE_STYLE('',(#283079)); +#283079 = SURFACE_STYLE_FILL_AREA(#283080); +#283080 = FILL_AREA_STYLE('',(#283081)); +#283081 = FILL_AREA_STYLE_COLOUR('',#279624); +#283082 = CURVE_STYLE('',#283083,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283084 = STYLED_ITEM('color',(#283085),#36791); +#283085 = PRESENTATION_STYLE_ASSIGNMENT((#283086,#283091)); +#283086 = SURFACE_STYLE_USAGE(.BOTH.,#283087); +#283087 = SURFACE_SIDE_STYLE('',(#283088)); +#283088 = SURFACE_STYLE_FILL_AREA(#283089); +#283089 = FILL_AREA_STYLE('',(#283090)); +#283090 = FILL_AREA_STYLE_COLOUR('',#279624); +#283091 = CURVE_STYLE('',#283092,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283093 = STYLED_ITEM('color',(#283094),#36808); +#283094 = PRESENTATION_STYLE_ASSIGNMENT((#283095,#283100)); +#283095 = SURFACE_STYLE_USAGE(.BOTH.,#283096); +#283096 = SURFACE_SIDE_STYLE('',(#283097)); +#283097 = SURFACE_STYLE_FILL_AREA(#283098); +#283098 = FILL_AREA_STYLE('',(#283099)); +#283099 = FILL_AREA_STYLE_COLOUR('',#282540); +#283100 = CURVE_STYLE('',#283101,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283102 = STYLED_ITEM('color',(#283103),#36841); +#283103 = PRESENTATION_STYLE_ASSIGNMENT((#283104,#283109)); +#283104 = SURFACE_STYLE_USAGE(.BOTH.,#283105); +#283105 = SURFACE_SIDE_STYLE('',(#283106)); +#283106 = SURFACE_STYLE_FILL_AREA(#283107); +#283107 = FILL_AREA_STYLE('',(#283108)); +#283108 = FILL_AREA_STYLE_COLOUR('',#279624); +#283109 = CURVE_STYLE('',#283110,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283111 = STYLED_ITEM('color',(#283112),#36871); +#283112 = PRESENTATION_STYLE_ASSIGNMENT((#283113,#283118)); +#283113 = SURFACE_STYLE_USAGE(.BOTH.,#283114); +#283114 = SURFACE_SIDE_STYLE('',(#283115)); +#283115 = SURFACE_STYLE_FILL_AREA(#283116); +#283116 = FILL_AREA_STYLE('',(#283117)); +#283117 = FILL_AREA_STYLE_COLOUR('',#279624); +#283118 = CURVE_STYLE('',#283119,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283120 = STYLED_ITEM('color',(#283121),#36894); +#283121 = PRESENTATION_STYLE_ASSIGNMENT((#283122,#283127)); +#283122 = SURFACE_STYLE_USAGE(.BOTH.,#283123); +#283123 = SURFACE_SIDE_STYLE('',(#283124)); +#283124 = SURFACE_STYLE_FILL_AREA(#283125); +#283125 = FILL_AREA_STYLE('',(#283126)); +#283126 = FILL_AREA_STYLE_COLOUR('',#279624); +#283127 = CURVE_STYLE('',#283128,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283129 = STYLED_ITEM('color',(#283130),#36917); +#283130 = PRESENTATION_STYLE_ASSIGNMENT((#283131,#283136)); +#283131 = SURFACE_STYLE_USAGE(.BOTH.,#283132); +#283132 = SURFACE_SIDE_STYLE('',(#283133)); +#283133 = SURFACE_STYLE_FILL_AREA(#283134); +#283134 = FILL_AREA_STYLE('',(#283135)); +#283135 = FILL_AREA_STYLE_COLOUR('',#279624); +#283136 = CURVE_STYLE('',#283137,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283138 = STYLED_ITEM('color',(#283139),#36934); +#283139 = PRESENTATION_STYLE_ASSIGNMENT((#283140,#283145)); +#283140 = SURFACE_STYLE_USAGE(.BOTH.,#283141); +#283141 = SURFACE_SIDE_STYLE('',(#283142)); +#283142 = SURFACE_STYLE_FILL_AREA(#283143); +#283143 = FILL_AREA_STYLE('',(#283144)); +#283144 = FILL_AREA_STYLE_COLOUR('',#282540); +#283145 = CURVE_STYLE('',#283146,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283147 = STYLED_ITEM('color',(#283148),#36963); +#283148 = PRESENTATION_STYLE_ASSIGNMENT((#283149,#283154)); +#283149 = SURFACE_STYLE_USAGE(.BOTH.,#283150); +#283150 = SURFACE_SIDE_STYLE('',(#283151)); +#283151 = SURFACE_STYLE_FILL_AREA(#283152); +#283152 = FILL_AREA_STYLE('',(#283153)); +#283153 = FILL_AREA_STYLE_COLOUR('',#279624); +#283154 = CURVE_STYLE('',#283155,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283156 = STYLED_ITEM('color',(#283157),#37017); +#283157 = PRESENTATION_STYLE_ASSIGNMENT((#283158,#283163)); +#283158 = SURFACE_STYLE_USAGE(.BOTH.,#283159); +#283159 = SURFACE_SIDE_STYLE('',(#283160)); +#283160 = SURFACE_STYLE_FILL_AREA(#283161); +#283161 = FILL_AREA_STYLE('',(#283162)); +#283162 = FILL_AREA_STYLE_COLOUR('',#279624); +#283163 = CURVE_STYLE('',#283164,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283165 = STYLED_ITEM('color',(#283166),#37040); +#283166 = PRESENTATION_STYLE_ASSIGNMENT((#283167,#283172)); +#283167 = SURFACE_STYLE_USAGE(.BOTH.,#283168); +#283168 = SURFACE_SIDE_STYLE('',(#283169)); +#283169 = SURFACE_STYLE_FILL_AREA(#283170); +#283170 = FILL_AREA_STYLE('',(#283171)); +#283171 = FILL_AREA_STYLE_COLOUR('',#279624); +#283172 = CURVE_STYLE('',#283173,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283174 = STYLED_ITEM('color',(#283175),#37063); +#283175 = PRESENTATION_STYLE_ASSIGNMENT((#283176,#283181)); +#283176 = SURFACE_STYLE_USAGE(.BOTH.,#283177); +#283177 = SURFACE_SIDE_STYLE('',(#283178)); +#283178 = SURFACE_STYLE_FILL_AREA(#283179); +#283179 = FILL_AREA_STYLE('',(#283180)); +#283180 = FILL_AREA_STYLE_COLOUR('',#279624); +#283181 = CURVE_STYLE('',#283182,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283183 = STYLED_ITEM('color',(#283184),#37086); +#283184 = PRESENTATION_STYLE_ASSIGNMENT((#283185,#283190)); +#283185 = SURFACE_STYLE_USAGE(.BOTH.,#283186); +#283186 = SURFACE_SIDE_STYLE('',(#283187)); +#283187 = SURFACE_STYLE_FILL_AREA(#283188); +#283188 = FILL_AREA_STYLE('',(#283189)); +#283189 = FILL_AREA_STYLE_COLOUR('',#279624); +#283190 = CURVE_STYLE('',#283191,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283192 = STYLED_ITEM('color',(#283193),#37125); +#283193 = PRESENTATION_STYLE_ASSIGNMENT((#283194,#283199)); +#283194 = SURFACE_STYLE_USAGE(.BOTH.,#283195); +#283195 = SURFACE_SIDE_STYLE('',(#283196)); +#283196 = SURFACE_STYLE_FILL_AREA(#283197); +#283197 = FILL_AREA_STYLE('',(#283198)); +#283198 = FILL_AREA_STYLE_COLOUR('',#282540); +#283199 = CURVE_STYLE('',#283200,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283201 = STYLED_ITEM('color',(#283202),#37147); +#283202 = PRESENTATION_STYLE_ASSIGNMENT((#283203,#283208)); +#283203 = SURFACE_STYLE_USAGE(.BOTH.,#283204); +#283204 = SURFACE_SIDE_STYLE('',(#283205)); +#283205 = SURFACE_STYLE_FILL_AREA(#283206); +#283206 = FILL_AREA_STYLE('',(#283207)); +#283207 = FILL_AREA_STYLE_COLOUR('',#279624); +#283208 = CURVE_STYLE('',#283209,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283210 = STYLED_ITEM('color',(#283211),#37191); +#283211 = PRESENTATION_STYLE_ASSIGNMENT((#283212,#283217)); +#283212 = SURFACE_STYLE_USAGE(.BOTH.,#283213); +#283213 = SURFACE_SIDE_STYLE('',(#283214)); +#283214 = SURFACE_STYLE_FILL_AREA(#283215); +#283215 = FILL_AREA_STYLE('',(#283216)); +#283216 = FILL_AREA_STYLE_COLOUR('',#282540); +#283217 = CURVE_STYLE('',#283218,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283219 = STYLED_ITEM('color',(#283220),#37266); +#283220 = PRESENTATION_STYLE_ASSIGNMENT((#283221,#283226)); +#283221 = SURFACE_STYLE_USAGE(.BOTH.,#283222); +#283222 = SURFACE_SIDE_STYLE('',(#283223)); +#283223 = SURFACE_STYLE_FILL_AREA(#283224); +#283224 = FILL_AREA_STYLE('',(#283225)); +#283225 = FILL_AREA_STYLE_COLOUR('',#282540); +#283226 = CURVE_STYLE('',#283227,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283228 = STYLED_ITEM('color',(#283229),#37290); +#283229 = PRESENTATION_STYLE_ASSIGNMENT((#283230,#283235)); +#283230 = SURFACE_STYLE_USAGE(.BOTH.,#283231); +#283231 = SURFACE_SIDE_STYLE('',(#283232)); +#283232 = SURFACE_STYLE_FILL_AREA(#283233); +#283233 = FILL_AREA_STYLE('',(#283234)); +#283234 = FILL_AREA_STYLE_COLOUR('',#282540); +#283235 = CURVE_STYLE('',#283236,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283237 = STYLED_ITEM('color',(#283238),#37358); +#283238 = PRESENTATION_STYLE_ASSIGNMENT((#283239,#283244)); +#283239 = SURFACE_STYLE_USAGE(.BOTH.,#283240); +#283240 = SURFACE_SIDE_STYLE('',(#283241)); +#283241 = SURFACE_STYLE_FILL_AREA(#283242); +#283242 = FILL_AREA_STYLE('',(#283243)); +#283243 = FILL_AREA_STYLE_COLOUR('',#279624); +#283244 = CURVE_STYLE('',#283245,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283246 = STYLED_ITEM('color',(#283247),#37375); +#283247 = PRESENTATION_STYLE_ASSIGNMENT((#283248,#283253)); +#283248 = SURFACE_STYLE_USAGE(.BOTH.,#283249); +#283249 = SURFACE_SIDE_STYLE('',(#283250)); +#283250 = SURFACE_STYLE_FILL_AREA(#283251); +#283251 = FILL_AREA_STYLE('',(#283252)); +#283252 = FILL_AREA_STYLE_COLOUR('',#282540); +#283253 = CURVE_STYLE('',#283254,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283255 = STYLED_ITEM('color',(#283256),#37450); +#283256 = PRESENTATION_STYLE_ASSIGNMENT((#283257,#283262)); +#283257 = SURFACE_STYLE_USAGE(.BOTH.,#283258); +#283258 = SURFACE_SIDE_STYLE('',(#283259)); +#283259 = SURFACE_STYLE_FILL_AREA(#283260); +#283260 = FILL_AREA_STYLE('',(#283261)); +#283261 = FILL_AREA_STYLE_COLOUR('',#282540); +#283262 = CURVE_STYLE('',#283263,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283264 = STYLED_ITEM('color',(#283265),#37474); +#283265 = PRESENTATION_STYLE_ASSIGNMENT((#283266,#283271)); +#283266 = SURFACE_STYLE_USAGE(.BOTH.,#283267); +#283267 = SURFACE_SIDE_STYLE('',(#283268)); +#283268 = SURFACE_STYLE_FILL_AREA(#283269); +#283269 = FILL_AREA_STYLE('',(#283270)); +#283270 = FILL_AREA_STYLE_COLOUR('',#282540); +#283271 = CURVE_STYLE('',#283272,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283273 = STYLED_ITEM('color',(#283274),#37542); +#283274 = PRESENTATION_STYLE_ASSIGNMENT((#283275,#283280)); +#283275 = SURFACE_STYLE_USAGE(.BOTH.,#283276); +#283276 = SURFACE_SIDE_STYLE('',(#283277)); +#283277 = SURFACE_STYLE_FILL_AREA(#283278); +#283278 = FILL_AREA_STYLE('',(#283279)); +#283279 = FILL_AREA_STYLE_COLOUR('',#282540); +#283280 = CURVE_STYLE('',#283281,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283282 = STYLED_ITEM('color',(#283283),#37617); +#283283 = PRESENTATION_STYLE_ASSIGNMENT((#283284,#283289)); +#283284 = SURFACE_STYLE_USAGE(.BOTH.,#283285); +#283285 = SURFACE_SIDE_STYLE('',(#283286)); +#283286 = SURFACE_STYLE_FILL_AREA(#283287); +#283287 = FILL_AREA_STYLE('',(#283288)); +#283288 = FILL_AREA_STYLE_COLOUR('',#282540); +#283289 = CURVE_STYLE('',#283290,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283291 = STYLED_ITEM('color',(#283292),#37641); +#283292 = PRESENTATION_STYLE_ASSIGNMENT((#283293,#283298)); +#283293 = SURFACE_STYLE_USAGE(.BOTH.,#283294); +#283294 = SURFACE_SIDE_STYLE('',(#283295)); +#283295 = SURFACE_STYLE_FILL_AREA(#283296); +#283296 = FILL_AREA_STYLE('',(#283297)); +#283297 = FILL_AREA_STYLE_COLOUR('',#282540); +#283298 = CURVE_STYLE('',#283299,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283300 = STYLED_ITEM('color',(#283301),#37709); +#283301 = PRESENTATION_STYLE_ASSIGNMENT((#283302,#283307)); +#283302 = SURFACE_STYLE_USAGE(.BOTH.,#283303); +#283303 = SURFACE_SIDE_STYLE('',(#283304)); +#283304 = SURFACE_STYLE_FILL_AREA(#283305); +#283305 = FILL_AREA_STYLE('',(#283306)); +#283306 = FILL_AREA_STYLE_COLOUR('',#282540); +#283307 = CURVE_STYLE('',#283308,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283309 = STYLED_ITEM('color',(#283310),#37726); +#283310 = PRESENTATION_STYLE_ASSIGNMENT((#283311,#283316)); +#283311 = SURFACE_STYLE_USAGE(.BOTH.,#283312); +#283312 = SURFACE_SIDE_STYLE('',(#283313)); +#283313 = SURFACE_STYLE_FILL_AREA(#283314); +#283314 = FILL_AREA_STYLE('',(#283315)); +#283315 = FILL_AREA_STYLE_COLOUR('',#282540); +#283316 = CURVE_STYLE('',#283317,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283318 = STYLED_ITEM('color',(#283319),#37743); +#283319 = PRESENTATION_STYLE_ASSIGNMENT((#283320,#283325)); +#283320 = SURFACE_STYLE_USAGE(.BOTH.,#283321); +#283321 = SURFACE_SIDE_STYLE('',(#283322)); +#283322 = SURFACE_STYLE_FILL_AREA(#283323); +#283323 = FILL_AREA_STYLE('',(#283324)); +#283324 = FILL_AREA_STYLE_COLOUR('',#279624); +#283325 = CURVE_STYLE('',#283326,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283327 = STYLED_ITEM('color',(#283328),#37789); +#283328 = PRESENTATION_STYLE_ASSIGNMENT((#283329,#283334)); +#283329 = SURFACE_STYLE_USAGE(.BOTH.,#283330); +#283330 = SURFACE_SIDE_STYLE('',(#283331)); +#283331 = SURFACE_STYLE_FILL_AREA(#283332); +#283332 = FILL_AREA_STYLE('',(#283333)); +#283333 = FILL_AREA_STYLE_COLOUR('',#279624); +#283334 = CURVE_STYLE('',#283335,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283336 = STYLED_ITEM('color',(#283337),#37805); +#283337 = PRESENTATION_STYLE_ASSIGNMENT((#283338,#283343)); +#283338 = SURFACE_STYLE_USAGE(.BOTH.,#283339); +#283339 = SURFACE_SIDE_STYLE('',(#283340)); +#283340 = SURFACE_STYLE_FILL_AREA(#283341); +#283341 = FILL_AREA_STYLE('',(#283342)); +#283342 = FILL_AREA_STYLE_COLOUR('',#279624); +#283343 = CURVE_STYLE('',#283344,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283345 = STYLED_ITEM('color',(#283346),#37821); +#283346 = PRESENTATION_STYLE_ASSIGNMENT((#283347,#283352)); +#283347 = SURFACE_STYLE_USAGE(.BOTH.,#283348); +#283348 = SURFACE_SIDE_STYLE('',(#283349)); +#283349 = SURFACE_STYLE_FILL_AREA(#283350); +#283350 = FILL_AREA_STYLE('',(#283351)); +#283351 = FILL_AREA_STYLE_COLOUR('',#282540); +#283352 = CURVE_STYLE('',#283353,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283354 = STYLED_ITEM('color',(#283355),#37838); +#283355 = PRESENTATION_STYLE_ASSIGNMENT((#283356,#283361)); +#283356 = SURFACE_STYLE_USAGE(.BOTH.,#283357); +#283357 = SURFACE_SIDE_STYLE('',(#283358)); +#283358 = SURFACE_STYLE_FILL_AREA(#283359); +#283359 = FILL_AREA_STYLE('',(#283360)); +#283360 = FILL_AREA_STYLE_COLOUR('',#279624); +#283361 = CURVE_STYLE('',#283362,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#283362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283363 = STYLED_ITEM('color',(#283364),#37850); +#283364 = PRESENTATION_STYLE_ASSIGNMENT((#283365,#283370)); +#283365 = SURFACE_STYLE_USAGE(.BOTH.,#283366); +#283366 = SURFACE_SIDE_STYLE('',(#283367)); +#283367 = SURFACE_STYLE_FILL_AREA(#283368); +#283368 = FILL_AREA_STYLE('',(#283369)); +#283369 = FILL_AREA_STYLE_COLOUR('',#282540); +#283370 = CURVE_STYLE('',#283371,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283372 = STYLED_ITEM('color',(#283373),#37867); +#283373 = PRESENTATION_STYLE_ASSIGNMENT((#283374,#283379)); +#283374 = SURFACE_STYLE_USAGE(.BOTH.,#283375); +#283375 = SURFACE_SIDE_STYLE('',(#283376)); +#283376 = SURFACE_STYLE_FILL_AREA(#283377); +#283377 = FILL_AREA_STYLE('',(#283378)); +#283378 = FILL_AREA_STYLE_COLOUR('',#282540); +#283379 = CURVE_STYLE('',#283380,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283381 = STYLED_ITEM('color',(#283382),#37884); +#283382 = PRESENTATION_STYLE_ASSIGNMENT((#283383,#283388)); +#283383 = SURFACE_STYLE_USAGE(.BOTH.,#283384); +#283384 = SURFACE_SIDE_STYLE('',(#283385)); +#283385 = SURFACE_STYLE_FILL_AREA(#283386); +#283386 = FILL_AREA_STYLE('',(#283387)); +#283387 = FILL_AREA_STYLE_COLOUR('',#282540); +#283388 = CURVE_STYLE('',#283389,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283390 = STYLED_ITEM('color',(#283391),#37901); +#283391 = PRESENTATION_STYLE_ASSIGNMENT((#283392,#283397)); +#283392 = SURFACE_STYLE_USAGE(.BOTH.,#283393); +#283393 = SURFACE_SIDE_STYLE('',(#283394)); +#283394 = SURFACE_STYLE_FILL_AREA(#283395); +#283395 = FILL_AREA_STYLE('',(#283396)); +#283396 = FILL_AREA_STYLE_COLOUR('',#282540); +#283397 = CURVE_STYLE('',#283398,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283399 = STYLED_ITEM('color',(#283400),#37918); +#283400 = PRESENTATION_STYLE_ASSIGNMENT((#283401,#283406)); +#283401 = SURFACE_STYLE_USAGE(.BOTH.,#283402); +#283402 = SURFACE_SIDE_STYLE('',(#283403)); +#283403 = SURFACE_STYLE_FILL_AREA(#283404); +#283404 = FILL_AREA_STYLE('',(#283405)); +#283405 = FILL_AREA_STYLE_COLOUR('',#282540); +#283406 = CURVE_STYLE('',#283407,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283408 = STYLED_ITEM('color',(#283409),#37935); +#283409 = PRESENTATION_STYLE_ASSIGNMENT((#283410,#283415)); +#283410 = SURFACE_STYLE_USAGE(.BOTH.,#283411); +#283411 = SURFACE_SIDE_STYLE('',(#283412)); +#283412 = SURFACE_STYLE_FILL_AREA(#283413); +#283413 = FILL_AREA_STYLE('',(#283414)); +#283414 = FILL_AREA_STYLE_COLOUR('',#282540); +#283415 = CURVE_STYLE('',#283416,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283417 = STYLED_ITEM('color',(#283418),#37952); +#283418 = PRESENTATION_STYLE_ASSIGNMENT((#283419,#283424)); +#283419 = SURFACE_STYLE_USAGE(.BOTH.,#283420); +#283420 = SURFACE_SIDE_STYLE('',(#283421)); +#283421 = SURFACE_STYLE_FILL_AREA(#283422); +#283422 = FILL_AREA_STYLE('',(#283423)); +#283423 = FILL_AREA_STYLE_COLOUR('',#282540); +#283424 = CURVE_STYLE('',#283425,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283426 = STYLED_ITEM('color',(#283427),#37964); +#283427 = PRESENTATION_STYLE_ASSIGNMENT((#283428,#283433)); +#283428 = SURFACE_STYLE_USAGE(.BOTH.,#283429); +#283429 = SURFACE_SIDE_STYLE('',(#283430)); +#283430 = SURFACE_STYLE_FILL_AREA(#283431); +#283431 = FILL_AREA_STYLE('',(#283432)); +#283432 = FILL_AREA_STYLE_COLOUR('',#282540); +#283433 = CURVE_STYLE('',#283434,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283435 = STYLED_ITEM('color',(#283436),#37981); +#283436 = PRESENTATION_STYLE_ASSIGNMENT((#283437,#283442)); +#283437 = SURFACE_STYLE_USAGE(.BOTH.,#283438); +#283438 = SURFACE_SIDE_STYLE('',(#283439)); +#283439 = SURFACE_STYLE_FILL_AREA(#283440); +#283440 = FILL_AREA_STYLE('',(#283441)); +#283441 = FILL_AREA_STYLE_COLOUR('',#282540); +#283442 = CURVE_STYLE('',#283443,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283444 = STYLED_ITEM('color',(#283445),#37998); +#283445 = PRESENTATION_STYLE_ASSIGNMENT((#283446,#283451)); +#283446 = SURFACE_STYLE_USAGE(.BOTH.,#283447); +#283447 = SURFACE_SIDE_STYLE('',(#283448)); +#283448 = SURFACE_STYLE_FILL_AREA(#283449); +#283449 = FILL_AREA_STYLE('',(#283450)); +#283450 = FILL_AREA_STYLE_COLOUR('',#282540); +#283451 = CURVE_STYLE('',#283452,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283453 = STYLED_ITEM('color',(#283454),#38015); +#283454 = PRESENTATION_STYLE_ASSIGNMENT((#283455,#283460)); +#283455 = SURFACE_STYLE_USAGE(.BOTH.,#283456); +#283456 = SURFACE_SIDE_STYLE('',(#283457)); +#283457 = SURFACE_STYLE_FILL_AREA(#283458); +#283458 = FILL_AREA_STYLE('',(#283459)); +#283459 = FILL_AREA_STYLE_COLOUR('',#282540); +#283460 = CURVE_STYLE('',#283461,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283462 = STYLED_ITEM('color',(#283463),#38032); +#283463 = PRESENTATION_STYLE_ASSIGNMENT((#283464,#283469)); +#283464 = SURFACE_STYLE_USAGE(.BOTH.,#283465); +#283465 = SURFACE_SIDE_STYLE('',(#283466)); +#283466 = SURFACE_STYLE_FILL_AREA(#283467); +#283467 = FILL_AREA_STYLE('',(#283468)); +#283468 = FILL_AREA_STYLE_COLOUR('',#282540); +#283469 = CURVE_STYLE('',#283470,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283471 = STYLED_ITEM('color',(#283472),#38049); +#283472 = PRESENTATION_STYLE_ASSIGNMENT((#283473,#283478)); +#283473 = SURFACE_STYLE_USAGE(.BOTH.,#283474); +#283474 = SURFACE_SIDE_STYLE('',(#283475)); +#283475 = SURFACE_STYLE_FILL_AREA(#283476); +#283476 = FILL_AREA_STYLE('',(#283477)); +#283477 = FILL_AREA_STYLE_COLOUR('',#282540); +#283478 = CURVE_STYLE('',#283479,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283480 = STYLED_ITEM('color',(#283481),#38061); +#283481 = PRESENTATION_STYLE_ASSIGNMENT((#283482,#283487)); +#283482 = SURFACE_STYLE_USAGE(.BOTH.,#283483); +#283483 = SURFACE_SIDE_STYLE('',(#283484)); +#283484 = SURFACE_STYLE_FILL_AREA(#283485); +#283485 = FILL_AREA_STYLE('',(#283486)); +#283486 = FILL_AREA_STYLE_COLOUR('',#282540); +#283487 = CURVE_STYLE('',#283488,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283489 = STYLED_ITEM('color',(#283490),#38078); +#283490 = PRESENTATION_STYLE_ASSIGNMENT((#283491,#283496)); +#283491 = SURFACE_STYLE_USAGE(.BOTH.,#283492); +#283492 = SURFACE_SIDE_STYLE('',(#283493)); +#283493 = SURFACE_STYLE_FILL_AREA(#283494); +#283494 = FILL_AREA_STYLE('',(#283495)); +#283495 = FILL_AREA_STYLE_COLOUR('',#282540); +#283496 = CURVE_STYLE('',#283497,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283498 = STYLED_ITEM('color',(#283499),#38095); +#283499 = PRESENTATION_STYLE_ASSIGNMENT((#283500,#283505)); +#283500 = SURFACE_STYLE_USAGE(.BOTH.,#283501); +#283501 = SURFACE_SIDE_STYLE('',(#283502)); +#283502 = SURFACE_STYLE_FILL_AREA(#283503); +#283503 = FILL_AREA_STYLE('',(#283504)); +#283504 = FILL_AREA_STYLE_COLOUR('',#282540); +#283505 = CURVE_STYLE('',#283506,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283507 = STYLED_ITEM('color',(#283508),#38112); +#283508 = PRESENTATION_STYLE_ASSIGNMENT((#283509,#283514)); +#283509 = SURFACE_STYLE_USAGE(.BOTH.,#283510); +#283510 = SURFACE_SIDE_STYLE('',(#283511)); +#283511 = SURFACE_STYLE_FILL_AREA(#283512); +#283512 = FILL_AREA_STYLE('',(#283513)); +#283513 = FILL_AREA_STYLE_COLOUR('',#282540); +#283514 = CURVE_STYLE('',#283515,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283516 = STYLED_ITEM('color',(#283517),#38129); +#283517 = PRESENTATION_STYLE_ASSIGNMENT((#283518,#283523)); +#283518 = SURFACE_STYLE_USAGE(.BOTH.,#283519); +#283519 = SURFACE_SIDE_STYLE('',(#283520)); +#283520 = SURFACE_STYLE_FILL_AREA(#283521); +#283521 = FILL_AREA_STYLE('',(#283522)); +#283522 = FILL_AREA_STYLE_COLOUR('',#282540); +#283523 = CURVE_STYLE('',#283524,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283525 = STYLED_ITEM('color',(#283526),#38146); +#283526 = PRESENTATION_STYLE_ASSIGNMENT((#283527,#283532)); +#283527 = SURFACE_STYLE_USAGE(.BOTH.,#283528); +#283528 = SURFACE_SIDE_STYLE('',(#283529)); +#283529 = SURFACE_STYLE_FILL_AREA(#283530); +#283530 = FILL_AREA_STYLE('',(#283531)); +#283531 = FILL_AREA_STYLE_COLOUR('',#282540); +#283532 = CURVE_STYLE('',#283533,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#283533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283534 = STYLED_ITEM('color',(#283535),#38158); +#283535 = PRESENTATION_STYLE_ASSIGNMENT((#283536,#283541)); +#283536 = SURFACE_STYLE_USAGE(.BOTH.,#283537); +#283537 = SURFACE_SIDE_STYLE('',(#283538)); +#283538 = SURFACE_STYLE_FILL_AREA(#283539); +#283539 = FILL_AREA_STYLE('',(#283540)); +#283540 = FILL_AREA_STYLE_COLOUR('',#282905); +#283541 = CURVE_STYLE('',#283542,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#283542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283543 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #283544,#283552,#283559,#283566,#283573,#283580,#283587,#283594, + #283601,#283608,#283615,#283622,#283629,#283636,#283643,#283650, + #283657,#283664,#283671,#283678,#283685,#283692,#283699,#283706, + #283713,#283720,#283727,#283734,#283741,#283748,#283755,#283762, + #283769,#283776,#283783,#283790,#283797,#283804,#283811,#283818, + #283825,#283832,#283839,#283846,#283853,#283860,#283867,#283874, + #283881,#283888,#283895,#283902,#283909,#283916,#283923,#283930, + #283938,#283945,#283952,#283959,#283966,#283973,#283980,#283987, + #283994,#284001,#284008,#284015,#284022,#284029,#284036,#284043, + #284050,#284057,#284064,#284071,#284078,#284085,#284092,#284099, + #284106,#284113,#284120,#284127,#284134,#284141,#284148,#284155, + #284162,#284169,#284176,#284183,#284190,#284197,#284204,#284211, + #284218,#284225,#284232,#284239,#284246,#284253,#284260,#284267, + #284274,#284281,#284288,#284295,#284302,#284309,#284316,#284323, + #284330,#284337,#284344,#284351,#284358),#4905); +#283544 = STYLED_ITEM('color',(#283545),#1386); +#283545 = PRESENTATION_STYLE_ASSIGNMENT((#283546)); +#283546 = SURFACE_STYLE_USAGE(.BOTH.,#283547); +#283547 = SURFACE_SIDE_STYLE('',(#283548)); +#283548 = SURFACE_STYLE_FILL_AREA(#283549); +#283549 = FILL_AREA_STYLE('',(#283550)); +#283550 = FILL_AREA_STYLE_COLOUR('',#283551); +#283551 = COLOUR_RGB('',0.894117649055,0.890196087049,0.811764731185); +#283552 = STYLED_ITEM('color',(#283553),#1458); +#283553 = PRESENTATION_STYLE_ASSIGNMENT((#283554)); +#283554 = SURFACE_STYLE_USAGE(.BOTH.,#283555); +#283555 = SURFACE_SIDE_STYLE('',(#283556)); +#283556 = SURFACE_STYLE_FILL_AREA(#283557); +#283557 = FILL_AREA_STYLE('',(#283558)); +#283558 = FILL_AREA_STYLE_COLOUR('',#283551); +#283559 = STYLED_ITEM('color',(#283560),#1497); +#283560 = PRESENTATION_STYLE_ASSIGNMENT((#283561)); +#283561 = SURFACE_STYLE_USAGE(.BOTH.,#283562); +#283562 = SURFACE_SIDE_STYLE('',(#283563)); +#283563 = SURFACE_STYLE_FILL_AREA(#283564); +#283564 = FILL_AREA_STYLE('',(#283565)); +#283565 = FILL_AREA_STYLE_COLOUR('',#283551); +#283566 = STYLED_ITEM('color',(#283567),#1521); +#283567 = PRESENTATION_STYLE_ASSIGNMENT((#283568)); +#283568 = SURFACE_STYLE_USAGE(.BOTH.,#283569); +#283569 = SURFACE_SIDE_STYLE('',(#283570)); +#283570 = SURFACE_STYLE_FILL_AREA(#283571); +#283571 = FILL_AREA_STYLE('',(#283572)); +#283572 = FILL_AREA_STYLE_COLOUR('',#283551); +#283573 = STYLED_ITEM('color',(#283574),#1586); +#283574 = PRESENTATION_STYLE_ASSIGNMENT((#283575)); +#283575 = SURFACE_STYLE_USAGE(.BOTH.,#283576); +#283576 = SURFACE_SIDE_STYLE('',(#283577)); +#283577 = SURFACE_STYLE_FILL_AREA(#283578); +#283578 = FILL_AREA_STYLE('',(#283579)); +#283579 = FILL_AREA_STYLE_COLOUR('',#283551); +#283580 = STYLED_ITEM('color',(#283581),#1610); +#283581 = PRESENTATION_STYLE_ASSIGNMENT((#283582)); +#283582 = SURFACE_STYLE_USAGE(.BOTH.,#283583); +#283583 = SURFACE_SIDE_STYLE('',(#283584)); +#283584 = SURFACE_STYLE_FILL_AREA(#283585); +#283585 = FILL_AREA_STYLE('',(#283586)); +#283586 = FILL_AREA_STYLE_COLOUR('',#283551); +#283587 = STYLED_ITEM('color',(#283588),#1730); +#283588 = PRESENTATION_STYLE_ASSIGNMENT((#283589)); +#283589 = SURFACE_STYLE_USAGE(.BOTH.,#283590); +#283590 = SURFACE_SIDE_STYLE('',(#283591)); +#283591 = SURFACE_STYLE_FILL_AREA(#283592); +#283592 = FILL_AREA_STYLE('',(#283593)); +#283593 = FILL_AREA_STYLE_COLOUR('',#283551); +#283594 = STYLED_ITEM('color',(#283595),#1754); +#283595 = PRESENTATION_STYLE_ASSIGNMENT((#283596)); +#283596 = SURFACE_STYLE_USAGE(.BOTH.,#283597); +#283597 = SURFACE_SIDE_STYLE('',(#283598)); +#283598 = SURFACE_STYLE_FILL_AREA(#283599); +#283599 = FILL_AREA_STYLE('',(#283600)); +#283600 = FILL_AREA_STYLE_COLOUR('',#283551); +#283601 = STYLED_ITEM('color',(#283602),#1819); +#283602 = PRESENTATION_STYLE_ASSIGNMENT((#283603)); +#283603 = SURFACE_STYLE_USAGE(.BOTH.,#283604); +#283604 = SURFACE_SIDE_STYLE('',(#283605)); +#283605 = SURFACE_STYLE_FILL_AREA(#283606); +#283606 = FILL_AREA_STYLE('',(#283607)); +#283607 = FILL_AREA_STYLE_COLOUR('',#283551); +#283608 = STYLED_ITEM('color',(#283609),#1844); +#283609 = PRESENTATION_STYLE_ASSIGNMENT((#283610)); +#283610 = SURFACE_STYLE_USAGE(.BOTH.,#283611); +#283611 = SURFACE_SIDE_STYLE('',(#283612)); +#283612 = SURFACE_STYLE_FILL_AREA(#283613); +#283613 = FILL_AREA_STYLE('',(#283614)); +#283614 = FILL_AREA_STYLE_COLOUR('',#283551); +#283615 = STYLED_ITEM('color',(#283616),#1893); +#283616 = PRESENTATION_STYLE_ASSIGNMENT((#283617)); +#283617 = SURFACE_STYLE_USAGE(.BOTH.,#283618); +#283618 = SURFACE_SIDE_STYLE('',(#283619)); +#283619 = SURFACE_STYLE_FILL_AREA(#283620); +#283620 = FILL_AREA_STYLE('',(#283621)); +#283621 = FILL_AREA_STYLE_COLOUR('',#283551); +#283622 = STYLED_ITEM('color',(#283623),#1910); +#283623 = PRESENTATION_STYLE_ASSIGNMENT((#283624)); +#283624 = SURFACE_STYLE_USAGE(.BOTH.,#283625); +#283625 = SURFACE_SIDE_STYLE('',(#283626)); +#283626 = SURFACE_STYLE_FILL_AREA(#283627); +#283627 = FILL_AREA_STYLE('',(#283628)); +#283628 = FILL_AREA_STYLE_COLOUR('',#283551); +#283629 = STYLED_ITEM('color',(#283630),#1934); +#283630 = PRESENTATION_STYLE_ASSIGNMENT((#283631)); +#283631 = SURFACE_STYLE_USAGE(.BOTH.,#283632); +#283632 = SURFACE_SIDE_STYLE('',(#283633)); +#283633 = SURFACE_STYLE_FILL_AREA(#283634); +#283634 = FILL_AREA_STYLE('',(#283635)); +#283635 = FILL_AREA_STYLE_COLOUR('',#283551); +#283636 = STYLED_ITEM('color',(#283637),#1951); +#283637 = PRESENTATION_STYLE_ASSIGNMENT((#283638)); +#283638 = SURFACE_STYLE_USAGE(.BOTH.,#283639); +#283639 = SURFACE_SIDE_STYLE('',(#283640)); +#283640 = SURFACE_STYLE_FILL_AREA(#283641); +#283641 = FILL_AREA_STYLE('',(#283642)); +#283642 = FILL_AREA_STYLE_COLOUR('',#283551); +#283643 = STYLED_ITEM('color',(#283644),#2121); +#283644 = PRESENTATION_STYLE_ASSIGNMENT((#283645)); +#283645 = SURFACE_STYLE_USAGE(.BOTH.,#283646); +#283646 = SURFACE_SIDE_STYLE('',(#283647)); +#283647 = SURFACE_STYLE_FILL_AREA(#283648); +#283648 = FILL_AREA_STYLE('',(#283649)); +#283649 = FILL_AREA_STYLE_COLOUR('',#283551); +#283650 = STYLED_ITEM('color',(#283651),#2145); +#283651 = PRESENTATION_STYLE_ASSIGNMENT((#283652)); +#283652 = SURFACE_STYLE_USAGE(.BOTH.,#283653); +#283653 = SURFACE_SIDE_STYLE('',(#283654)); +#283654 = SURFACE_STYLE_FILL_AREA(#283655); +#283655 = FILL_AREA_STYLE('',(#283656)); +#283656 = FILL_AREA_STYLE_COLOUR('',#283551); +#283657 = STYLED_ITEM('color',(#283658),#2379); +#283658 = PRESENTATION_STYLE_ASSIGNMENT((#283659)); +#283659 = SURFACE_STYLE_USAGE(.BOTH.,#283660); +#283660 = SURFACE_SIDE_STYLE('',(#283661)); +#283661 = SURFACE_STYLE_FILL_AREA(#283662); +#283662 = FILL_AREA_STYLE('',(#283663)); +#283663 = FILL_AREA_STYLE_COLOUR('',#283551); +#283664 = STYLED_ITEM('color',(#283665),#2403); +#283665 = PRESENTATION_STYLE_ASSIGNMENT((#283666)); +#283666 = SURFACE_STYLE_USAGE(.BOTH.,#283667); +#283667 = SURFACE_SIDE_STYLE('',(#283668)); +#283668 = SURFACE_STYLE_FILL_AREA(#283669); +#283669 = FILL_AREA_STYLE('',(#283670)); +#283670 = FILL_AREA_STYLE_COLOUR('',#283551); +#283671 = STYLED_ITEM('color',(#283672),#2436); +#283672 = PRESENTATION_STYLE_ASSIGNMENT((#283673)); +#283673 = SURFACE_STYLE_USAGE(.BOTH.,#283674); +#283674 = SURFACE_SIDE_STYLE('',(#283675)); +#283675 = SURFACE_STYLE_FILL_AREA(#283676); +#283676 = FILL_AREA_STYLE('',(#283677)); +#283677 = FILL_AREA_STYLE_COLOUR('',#283551); +#283678 = STYLED_ITEM('color',(#283679),#2460); +#283679 = PRESENTATION_STYLE_ASSIGNMENT((#283680)); +#283680 = SURFACE_STYLE_USAGE(.BOTH.,#283681); +#283681 = SURFACE_SIDE_STYLE('',(#283682)); +#283682 = SURFACE_STYLE_FILL_AREA(#283683); +#283683 = FILL_AREA_STYLE('',(#283684)); +#283684 = FILL_AREA_STYLE_COLOUR('',#283551); +#283685 = STYLED_ITEM('color',(#283686),#2491); +#283686 = PRESENTATION_STYLE_ASSIGNMENT((#283687)); +#283687 = SURFACE_STYLE_USAGE(.BOTH.,#283688); +#283688 = SURFACE_SIDE_STYLE('',(#283689)); +#283689 = SURFACE_STYLE_FILL_AREA(#283690); +#283690 = FILL_AREA_STYLE('',(#283691)); +#283691 = FILL_AREA_STYLE_COLOUR('',#283551); +#283692 = STYLED_ITEM('color',(#283693),#2508); +#283693 = PRESENTATION_STYLE_ASSIGNMENT((#283694)); +#283694 = SURFACE_STYLE_USAGE(.BOTH.,#283695); +#283695 = SURFACE_SIDE_STYLE('',(#283696)); +#283696 = SURFACE_STYLE_FILL_AREA(#283697); +#283697 = FILL_AREA_STYLE('',(#283698)); +#283698 = FILL_AREA_STYLE_COLOUR('',#283551); +#283699 = STYLED_ITEM('color',(#283700),#2541); +#283700 = PRESENTATION_STYLE_ASSIGNMENT((#283701)); +#283701 = SURFACE_STYLE_USAGE(.BOTH.,#283702); +#283702 = SURFACE_SIDE_STYLE('',(#283703)); +#283703 = SURFACE_STYLE_FILL_AREA(#283704); +#283704 = FILL_AREA_STYLE('',(#283705)); +#283705 = FILL_AREA_STYLE_COLOUR('',#283551); +#283706 = STYLED_ITEM('color',(#283707),#2565); +#283707 = PRESENTATION_STYLE_ASSIGNMENT((#283708)); +#283708 = SURFACE_STYLE_USAGE(.BOTH.,#283709); +#283709 = SURFACE_SIDE_STYLE('',(#283710)); +#283710 = SURFACE_STYLE_FILL_AREA(#283711); +#283711 = FILL_AREA_STYLE('',(#283712)); +#283712 = FILL_AREA_STYLE_COLOUR('',#283551); +#283713 = STYLED_ITEM('color',(#283714),#2596); +#283714 = PRESENTATION_STYLE_ASSIGNMENT((#283715)); +#283715 = SURFACE_STYLE_USAGE(.BOTH.,#283716); +#283716 = SURFACE_SIDE_STYLE('',(#283717)); +#283717 = SURFACE_STYLE_FILL_AREA(#283718); +#283718 = FILL_AREA_STYLE('',(#283719)); +#283719 = FILL_AREA_STYLE_COLOUR('',#283551); +#283720 = STYLED_ITEM('color',(#283721),#2613); +#283721 = PRESENTATION_STYLE_ASSIGNMENT((#283722)); +#283722 = SURFACE_STYLE_USAGE(.BOTH.,#283723); +#283723 = SURFACE_SIDE_STYLE('',(#283724)); +#283724 = SURFACE_STYLE_FILL_AREA(#283725); +#283725 = FILL_AREA_STYLE('',(#283726)); +#283726 = FILL_AREA_STYLE_COLOUR('',#283551); +#283727 = STYLED_ITEM('color',(#283728),#2646); +#283728 = PRESENTATION_STYLE_ASSIGNMENT((#283729)); +#283729 = SURFACE_STYLE_USAGE(.BOTH.,#283730); +#283730 = SURFACE_SIDE_STYLE('',(#283731)); +#283731 = SURFACE_STYLE_FILL_AREA(#283732); +#283732 = FILL_AREA_STYLE('',(#283733)); +#283733 = FILL_AREA_STYLE_COLOUR('',#283551); +#283734 = STYLED_ITEM('color',(#283735),#2670); +#283735 = PRESENTATION_STYLE_ASSIGNMENT((#283736)); +#283736 = SURFACE_STYLE_USAGE(.BOTH.,#283737); +#283737 = SURFACE_SIDE_STYLE('',(#283738)); +#283738 = SURFACE_STYLE_FILL_AREA(#283739); +#283739 = FILL_AREA_STYLE('',(#283740)); +#283740 = FILL_AREA_STYLE_COLOUR('',#283551); +#283741 = STYLED_ITEM('color',(#283742),#2701); +#283742 = PRESENTATION_STYLE_ASSIGNMENT((#283743)); +#283743 = SURFACE_STYLE_USAGE(.BOTH.,#283744); +#283744 = SURFACE_SIDE_STYLE('',(#283745)); +#283745 = SURFACE_STYLE_FILL_AREA(#283746); +#283746 = FILL_AREA_STYLE('',(#283747)); +#283747 = FILL_AREA_STYLE_COLOUR('',#283551); +#283748 = STYLED_ITEM('color',(#283749),#2713); +#283749 = PRESENTATION_STYLE_ASSIGNMENT((#283750)); +#283750 = SURFACE_STYLE_USAGE(.BOTH.,#283751); +#283751 = SURFACE_SIDE_STYLE('',(#283752)); +#283752 = SURFACE_STYLE_FILL_AREA(#283753); +#283753 = FILL_AREA_STYLE('',(#283754)); +#283754 = FILL_AREA_STYLE_COLOUR('',#283551); +#283755 = STYLED_ITEM('color',(#283756),#2746); +#283756 = PRESENTATION_STYLE_ASSIGNMENT((#283757)); +#283757 = SURFACE_STYLE_USAGE(.BOTH.,#283758); +#283758 = SURFACE_SIDE_STYLE('',(#283759)); +#283759 = SURFACE_STYLE_FILL_AREA(#283760); +#283760 = FILL_AREA_STYLE('',(#283761)); +#283761 = FILL_AREA_STYLE_COLOUR('',#283551); +#283762 = STYLED_ITEM('color',(#283763),#2763); +#283763 = PRESENTATION_STYLE_ASSIGNMENT((#283764)); +#283764 = SURFACE_STYLE_USAGE(.BOTH.,#283765); +#283765 = SURFACE_SIDE_STYLE('',(#283766)); +#283766 = SURFACE_STYLE_FILL_AREA(#283767); +#283767 = FILL_AREA_STYLE('',(#283768)); +#283768 = FILL_AREA_STYLE_COLOUR('',#283551); +#283769 = STYLED_ITEM('color',(#283770),#2780); +#283770 = PRESENTATION_STYLE_ASSIGNMENT((#283771)); +#283771 = SURFACE_STYLE_USAGE(.BOTH.,#283772); +#283772 = SURFACE_SIDE_STYLE('',(#283773)); +#283773 = SURFACE_STYLE_FILL_AREA(#283774); +#283774 = FILL_AREA_STYLE('',(#283775)); +#283775 = FILL_AREA_STYLE_COLOUR('',#283551); +#283776 = STYLED_ITEM('color',(#283777),#2792); +#283777 = PRESENTATION_STYLE_ASSIGNMENT((#283778)); +#283778 = SURFACE_STYLE_USAGE(.BOTH.,#283779); +#283779 = SURFACE_SIDE_STYLE('',(#283780)); +#283780 = SURFACE_STYLE_FILL_AREA(#283781); +#283781 = FILL_AREA_STYLE('',(#283782)); +#283782 = FILL_AREA_STYLE_COLOUR('',#283551); +#283783 = STYLED_ITEM('color',(#283784),#2906); +#283784 = PRESENTATION_STYLE_ASSIGNMENT((#283785)); +#283785 = SURFACE_STYLE_USAGE(.BOTH.,#283786); +#283786 = SURFACE_SIDE_STYLE('',(#283787)); +#283787 = SURFACE_STYLE_FILL_AREA(#283788); +#283788 = FILL_AREA_STYLE('',(#283789)); +#283789 = FILL_AREA_STYLE_COLOUR('',#283551); +#283790 = STYLED_ITEM('color',(#283791),#2923); +#283791 = PRESENTATION_STYLE_ASSIGNMENT((#283792)); +#283792 = SURFACE_STYLE_USAGE(.BOTH.,#283793); +#283793 = SURFACE_SIDE_STYLE('',(#283794)); +#283794 = SURFACE_STYLE_FILL_AREA(#283795); +#283795 = FILL_AREA_STYLE('',(#283796)); +#283796 = FILL_AREA_STYLE_COLOUR('',#283551); +#283797 = STYLED_ITEM('color',(#283798),#2940); +#283798 = PRESENTATION_STYLE_ASSIGNMENT((#283799)); +#283799 = SURFACE_STYLE_USAGE(.BOTH.,#283800); +#283800 = SURFACE_SIDE_STYLE('',(#283801)); +#283801 = SURFACE_STYLE_FILL_AREA(#283802); +#283802 = FILL_AREA_STYLE('',(#283803)); +#283803 = FILL_AREA_STYLE_COLOUR('',#283551); +#283804 = STYLED_ITEM('color',(#283805),#2957); +#283805 = PRESENTATION_STYLE_ASSIGNMENT((#283806)); +#283806 = SURFACE_STYLE_USAGE(.BOTH.,#283807); +#283807 = SURFACE_SIDE_STYLE('',(#283808)); +#283808 = SURFACE_STYLE_FILL_AREA(#283809); +#283809 = FILL_AREA_STYLE('',(#283810)); +#283810 = FILL_AREA_STYLE_COLOUR('',#283551); +#283811 = STYLED_ITEM('color',(#283812),#2974); +#283812 = PRESENTATION_STYLE_ASSIGNMENT((#283813)); +#283813 = SURFACE_STYLE_USAGE(.BOTH.,#283814); +#283814 = SURFACE_SIDE_STYLE('',(#283815)); +#283815 = SURFACE_STYLE_FILL_AREA(#283816); +#283816 = FILL_AREA_STYLE('',(#283817)); +#283817 = FILL_AREA_STYLE_COLOUR('',#283551); +#283818 = STYLED_ITEM('color',(#283819),#2991); +#283819 = PRESENTATION_STYLE_ASSIGNMENT((#283820)); +#283820 = SURFACE_STYLE_USAGE(.BOTH.,#283821); +#283821 = SURFACE_SIDE_STYLE('',(#283822)); +#283822 = SURFACE_STYLE_FILL_AREA(#283823); +#283823 = FILL_AREA_STYLE('',(#283824)); +#283824 = FILL_AREA_STYLE_COLOUR('',#283551); +#283825 = STYLED_ITEM('color',(#283826),#3008); +#283826 = PRESENTATION_STYLE_ASSIGNMENT((#283827)); +#283827 = SURFACE_STYLE_USAGE(.BOTH.,#283828); +#283828 = SURFACE_SIDE_STYLE('',(#283829)); +#283829 = SURFACE_STYLE_FILL_AREA(#283830); +#283830 = FILL_AREA_STYLE('',(#283831)); +#283831 = FILL_AREA_STYLE_COLOUR('',#283551); +#283832 = STYLED_ITEM('color',(#283833),#3025); +#283833 = PRESENTATION_STYLE_ASSIGNMENT((#283834)); +#283834 = SURFACE_STYLE_USAGE(.BOTH.,#283835); +#283835 = SURFACE_SIDE_STYLE('',(#283836)); +#283836 = SURFACE_STYLE_FILL_AREA(#283837); +#283837 = FILL_AREA_STYLE('',(#283838)); +#283838 = FILL_AREA_STYLE_COLOUR('',#283551); +#283839 = STYLED_ITEM('color',(#283840),#3042); +#283840 = PRESENTATION_STYLE_ASSIGNMENT((#283841)); +#283841 = SURFACE_STYLE_USAGE(.BOTH.,#283842); +#283842 = SURFACE_SIDE_STYLE('',(#283843)); +#283843 = SURFACE_STYLE_FILL_AREA(#283844); +#283844 = FILL_AREA_STYLE('',(#283845)); +#283845 = FILL_AREA_STYLE_COLOUR('',#283551); +#283846 = STYLED_ITEM('color',(#283847),#3059); +#283847 = PRESENTATION_STYLE_ASSIGNMENT((#283848)); +#283848 = SURFACE_STYLE_USAGE(.BOTH.,#283849); +#283849 = SURFACE_SIDE_STYLE('',(#283850)); +#283850 = SURFACE_STYLE_FILL_AREA(#283851); +#283851 = FILL_AREA_STYLE('',(#283852)); +#283852 = FILL_AREA_STYLE_COLOUR('',#283551); +#283853 = STYLED_ITEM('color',(#283854),#3076); +#283854 = PRESENTATION_STYLE_ASSIGNMENT((#283855)); +#283855 = SURFACE_STYLE_USAGE(.BOTH.,#283856); +#283856 = SURFACE_SIDE_STYLE('',(#283857)); +#283857 = SURFACE_STYLE_FILL_AREA(#283858); +#283858 = FILL_AREA_STYLE('',(#283859)); +#283859 = FILL_AREA_STYLE_COLOUR('',#283551); +#283860 = STYLED_ITEM('color',(#283861),#3093); +#283861 = PRESENTATION_STYLE_ASSIGNMENT((#283862)); +#283862 = SURFACE_STYLE_USAGE(.BOTH.,#283863); +#283863 = SURFACE_SIDE_STYLE('',(#283864)); +#283864 = SURFACE_STYLE_FILL_AREA(#283865); +#283865 = FILL_AREA_STYLE('',(#283866)); +#283866 = FILL_AREA_STYLE_COLOUR('',#283551); +#283867 = STYLED_ITEM('color',(#283868),#3110); +#283868 = PRESENTATION_STYLE_ASSIGNMENT((#283869)); +#283869 = SURFACE_STYLE_USAGE(.BOTH.,#283870); +#283870 = SURFACE_SIDE_STYLE('',(#283871)); +#283871 = SURFACE_STYLE_FILL_AREA(#283872); +#283872 = FILL_AREA_STYLE('',(#283873)); +#283873 = FILL_AREA_STYLE_COLOUR('',#283551); +#283874 = STYLED_ITEM('color',(#283875),#3127); +#283875 = PRESENTATION_STYLE_ASSIGNMENT((#283876)); +#283876 = SURFACE_STYLE_USAGE(.BOTH.,#283877); +#283877 = SURFACE_SIDE_STYLE('',(#283878)); +#283878 = SURFACE_STYLE_FILL_AREA(#283879); +#283879 = FILL_AREA_STYLE('',(#283880)); +#283880 = FILL_AREA_STYLE_COLOUR('',#283551); +#283881 = STYLED_ITEM('color',(#283882),#3144); +#283882 = PRESENTATION_STYLE_ASSIGNMENT((#283883)); +#283883 = SURFACE_STYLE_USAGE(.BOTH.,#283884); +#283884 = SURFACE_SIDE_STYLE('',(#283885)); +#283885 = SURFACE_STYLE_FILL_AREA(#283886); +#283886 = FILL_AREA_STYLE('',(#283887)); +#283887 = FILL_AREA_STYLE_COLOUR('',#283551); +#283888 = STYLED_ITEM('color',(#283889),#3156); +#283889 = PRESENTATION_STYLE_ASSIGNMENT((#283890)); +#283890 = SURFACE_STYLE_USAGE(.BOTH.,#283891); +#283891 = SURFACE_SIDE_STYLE('',(#283892)); +#283892 = SURFACE_STYLE_FILL_AREA(#283893); +#283893 = FILL_AREA_STYLE('',(#283894)); +#283894 = FILL_AREA_STYLE_COLOUR('',#283551); +#283895 = STYLED_ITEM('color',(#283896),#3173); +#283896 = PRESENTATION_STYLE_ASSIGNMENT((#283897)); +#283897 = SURFACE_STYLE_USAGE(.BOTH.,#283898); +#283898 = SURFACE_SIDE_STYLE('',(#283899)); +#283899 = SURFACE_STYLE_FILL_AREA(#283900); +#283900 = FILL_AREA_STYLE('',(#283901)); +#283901 = FILL_AREA_STYLE_COLOUR('',#283551); +#283902 = STYLED_ITEM('color',(#283903),#3190); +#283903 = PRESENTATION_STYLE_ASSIGNMENT((#283904)); +#283904 = SURFACE_STYLE_USAGE(.BOTH.,#283905); +#283905 = SURFACE_SIDE_STYLE('',(#283906)); +#283906 = SURFACE_STYLE_FILL_AREA(#283907); +#283907 = FILL_AREA_STYLE('',(#283908)); +#283908 = FILL_AREA_STYLE_COLOUR('',#283551); +#283909 = STYLED_ITEM('color',(#283910),#3207); +#283910 = PRESENTATION_STYLE_ASSIGNMENT((#283911)); +#283911 = SURFACE_STYLE_USAGE(.BOTH.,#283912); +#283912 = SURFACE_SIDE_STYLE('',(#283913)); +#283913 = SURFACE_STYLE_FILL_AREA(#283914); +#283914 = FILL_AREA_STYLE('',(#283915)); +#283915 = FILL_AREA_STYLE_COLOUR('',#283551); +#283916 = STYLED_ITEM('color',(#283917),#3253); +#283917 = PRESENTATION_STYLE_ASSIGNMENT((#283918)); +#283918 = SURFACE_STYLE_USAGE(.BOTH.,#283919); +#283919 = SURFACE_SIDE_STYLE('',(#283920)); +#283920 = SURFACE_STYLE_FILL_AREA(#283921); +#283921 = FILL_AREA_STYLE('',(#283922)); +#283922 = FILL_AREA_STYLE_COLOUR('',#283551); +#283923 = STYLED_ITEM('color',(#283924),#3299); +#283924 = PRESENTATION_STYLE_ASSIGNMENT((#283925)); +#283925 = SURFACE_STYLE_USAGE(.BOTH.,#283926); +#283926 = SURFACE_SIDE_STYLE('',(#283927)); +#283927 = SURFACE_STYLE_FILL_AREA(#283928); +#283928 = FILL_AREA_STYLE('',(#283929)); +#283929 = FILL_AREA_STYLE_COLOUR('',#283551); +#283930 = STYLED_ITEM('color',(#283931),#3345); +#283931 = PRESENTATION_STYLE_ASSIGNMENT((#283932)); +#283932 = SURFACE_STYLE_USAGE(.BOTH.,#283933); +#283933 = SURFACE_SIDE_STYLE('',(#283934)); +#283934 = SURFACE_STYLE_FILL_AREA(#283935); +#283935 = FILL_AREA_STYLE('',(#283936)); +#283936 = FILL_AREA_STYLE_COLOUR('',#283937); +#283937 = COLOUR_RGB('',0.823529417451,0.819607860991,0.780392170416); +#283938 = STYLED_ITEM('color',(#283939),#3376); +#283939 = PRESENTATION_STYLE_ASSIGNMENT((#283940)); +#283940 = SURFACE_STYLE_USAGE(.BOTH.,#283941); +#283941 = SURFACE_SIDE_STYLE('',(#283942)); +#283942 = SURFACE_STYLE_FILL_AREA(#283943); +#283943 = FILL_AREA_STYLE('',(#283944)); +#283944 = FILL_AREA_STYLE_COLOUR('',#283937); +#283945 = STYLED_ITEM('color',(#283946),#3400); +#283946 = PRESENTATION_STYLE_ASSIGNMENT((#283947)); +#283947 = SURFACE_STYLE_USAGE(.BOTH.,#283948); +#283948 = SURFACE_SIDE_STYLE('',(#283949)); +#283949 = SURFACE_STYLE_FILL_AREA(#283950); +#283950 = FILL_AREA_STYLE('',(#283951)); +#283951 = FILL_AREA_STYLE_COLOUR('',#283937); +#283952 = STYLED_ITEM('color',(#283953),#3424); +#283953 = PRESENTATION_STYLE_ASSIGNMENT((#283954)); +#283954 = SURFACE_STYLE_USAGE(.BOTH.,#283955); +#283955 = SURFACE_SIDE_STYLE('',(#283956)); +#283956 = SURFACE_STYLE_FILL_AREA(#283957); +#283957 = FILL_AREA_STYLE('',(#283958)); +#283958 = FILL_AREA_STYLE_COLOUR('',#283937); +#283959 = STYLED_ITEM('color',(#283960),#3441); +#283960 = PRESENTATION_STYLE_ASSIGNMENT((#283961)); +#283961 = SURFACE_STYLE_USAGE(.BOTH.,#283962); +#283962 = SURFACE_SIDE_STYLE('',(#283963)); +#283963 = SURFACE_STYLE_FILL_AREA(#283964); +#283964 = FILL_AREA_STYLE('',(#283965)); +#283965 = FILL_AREA_STYLE_COLOUR('',#283937); +#283966 = STYLED_ITEM('color',(#283967),#3472); +#283967 = PRESENTATION_STYLE_ASSIGNMENT((#283968)); +#283968 = SURFACE_STYLE_USAGE(.BOTH.,#283969); +#283969 = SURFACE_SIDE_STYLE('',(#283970)); +#283970 = SURFACE_STYLE_FILL_AREA(#283971); +#283971 = FILL_AREA_STYLE('',(#283972)); +#283972 = FILL_AREA_STYLE_COLOUR('',#283937); +#283973 = STYLED_ITEM('color',(#283974),#3496); +#283974 = PRESENTATION_STYLE_ASSIGNMENT((#283975)); +#283975 = SURFACE_STYLE_USAGE(.BOTH.,#283976); +#283976 = SURFACE_SIDE_STYLE('',(#283977)); +#283977 = SURFACE_STYLE_FILL_AREA(#283978); +#283978 = FILL_AREA_STYLE('',(#283979)); +#283979 = FILL_AREA_STYLE_COLOUR('',#283937); +#283980 = STYLED_ITEM('color',(#283981),#3520); +#283981 = PRESENTATION_STYLE_ASSIGNMENT((#283982)); +#283982 = SURFACE_STYLE_USAGE(.BOTH.,#283983); +#283983 = SURFACE_SIDE_STYLE('',(#283984)); +#283984 = SURFACE_STYLE_FILL_AREA(#283985); +#283985 = FILL_AREA_STYLE('',(#283986)); +#283986 = FILL_AREA_STYLE_COLOUR('',#283937); +#283987 = STYLED_ITEM('color',(#283988),#3537); +#283988 = PRESENTATION_STYLE_ASSIGNMENT((#283989)); +#283989 = SURFACE_STYLE_USAGE(.BOTH.,#283990); +#283990 = SURFACE_SIDE_STYLE('',(#283991)); +#283991 = SURFACE_STYLE_FILL_AREA(#283992); +#283992 = FILL_AREA_STYLE('',(#283993)); +#283993 = FILL_AREA_STYLE_COLOUR('',#283937); +#283994 = STYLED_ITEM('color',(#283995),#3568); +#283995 = PRESENTATION_STYLE_ASSIGNMENT((#283996)); +#283996 = SURFACE_STYLE_USAGE(.BOTH.,#283997); +#283997 = SURFACE_SIDE_STYLE('',(#283998)); +#283998 = SURFACE_STYLE_FILL_AREA(#283999); +#283999 = FILL_AREA_STYLE('',(#284000)); +#284000 = FILL_AREA_STYLE_COLOUR('',#283937); +#284001 = STYLED_ITEM('color',(#284002),#3592); +#284002 = PRESENTATION_STYLE_ASSIGNMENT((#284003)); +#284003 = SURFACE_STYLE_USAGE(.BOTH.,#284004); +#284004 = SURFACE_SIDE_STYLE('',(#284005)); +#284005 = SURFACE_STYLE_FILL_AREA(#284006); +#284006 = FILL_AREA_STYLE('',(#284007)); +#284007 = FILL_AREA_STYLE_COLOUR('',#283937); +#284008 = STYLED_ITEM('color',(#284009),#3616); +#284009 = PRESENTATION_STYLE_ASSIGNMENT((#284010)); +#284010 = SURFACE_STYLE_USAGE(.BOTH.,#284011); +#284011 = SURFACE_SIDE_STYLE('',(#284012)); +#284012 = SURFACE_STYLE_FILL_AREA(#284013); +#284013 = FILL_AREA_STYLE('',(#284014)); +#284014 = FILL_AREA_STYLE_COLOUR('',#283937); +#284015 = STYLED_ITEM('color',(#284016),#3633); +#284016 = PRESENTATION_STYLE_ASSIGNMENT((#284017)); +#284017 = SURFACE_STYLE_USAGE(.BOTH.,#284018); +#284018 = SURFACE_SIDE_STYLE('',(#284019)); +#284019 = SURFACE_STYLE_FILL_AREA(#284020); +#284020 = FILL_AREA_STYLE('',(#284021)); +#284021 = FILL_AREA_STYLE_COLOUR('',#283937); +#284022 = STYLED_ITEM('color',(#284023),#3696); +#284023 = PRESENTATION_STYLE_ASSIGNMENT((#284024)); +#284024 = SURFACE_STYLE_USAGE(.BOTH.,#284025); +#284025 = SURFACE_SIDE_STYLE('',(#284026)); +#284026 = SURFACE_STYLE_FILL_AREA(#284027); +#284027 = FILL_AREA_STYLE('',(#284028)); +#284028 = FILL_AREA_STYLE_COLOUR('',#283937); +#284029 = STYLED_ITEM('color',(#284030),#3720); +#284030 = PRESENTATION_STYLE_ASSIGNMENT((#284031)); +#284031 = SURFACE_STYLE_USAGE(.BOTH.,#284032); +#284032 = SURFACE_SIDE_STYLE('',(#284033)); +#284033 = SURFACE_STYLE_FILL_AREA(#284034); +#284034 = FILL_AREA_STYLE('',(#284035)); +#284035 = FILL_AREA_STYLE_COLOUR('',#283937); +#284036 = STYLED_ITEM('color',(#284037),#3776); +#284037 = PRESENTATION_STYLE_ASSIGNMENT((#284038)); +#284038 = SURFACE_STYLE_USAGE(.BOTH.,#284039); +#284039 = SURFACE_SIDE_STYLE('',(#284040)); +#284040 = SURFACE_STYLE_FILL_AREA(#284041); +#284041 = FILL_AREA_STYLE('',(#284042)); +#284042 = FILL_AREA_STYLE_COLOUR('',#283937); +#284043 = STYLED_ITEM('color',(#284044),#3793); +#284044 = PRESENTATION_STYLE_ASSIGNMENT((#284045)); +#284045 = SURFACE_STYLE_USAGE(.BOTH.,#284046); +#284046 = SURFACE_SIDE_STYLE('',(#284047)); +#284047 = SURFACE_STYLE_FILL_AREA(#284048); +#284048 = FILL_AREA_STYLE('',(#284049)); +#284049 = FILL_AREA_STYLE_COLOUR('',#283937); +#284050 = STYLED_ITEM('color',(#284051),#3824); +#284051 = PRESENTATION_STYLE_ASSIGNMENT((#284052)); +#284052 = SURFACE_STYLE_USAGE(.BOTH.,#284053); +#284053 = SURFACE_SIDE_STYLE('',(#284054)); +#284054 = SURFACE_STYLE_FILL_AREA(#284055); +#284055 = FILL_AREA_STYLE('',(#284056)); +#284056 = FILL_AREA_STYLE_COLOUR('',#283937); +#284057 = STYLED_ITEM('color',(#284058),#3848); +#284058 = PRESENTATION_STYLE_ASSIGNMENT((#284059)); +#284059 = SURFACE_STYLE_USAGE(.BOTH.,#284060); +#284060 = SURFACE_SIDE_STYLE('',(#284061)); +#284061 = SURFACE_STYLE_FILL_AREA(#284062); +#284062 = FILL_AREA_STYLE('',(#284063)); +#284063 = FILL_AREA_STYLE_COLOUR('',#283937); +#284064 = STYLED_ITEM('color',(#284065),#3872); +#284065 = PRESENTATION_STYLE_ASSIGNMENT((#284066)); +#284066 = SURFACE_STYLE_USAGE(.BOTH.,#284067); +#284067 = SURFACE_SIDE_STYLE('',(#284068)); +#284068 = SURFACE_STYLE_FILL_AREA(#284069); +#284069 = FILL_AREA_STYLE('',(#284070)); +#284070 = FILL_AREA_STYLE_COLOUR('',#283937); +#284071 = STYLED_ITEM('color',(#284072),#3889); +#284072 = PRESENTATION_STYLE_ASSIGNMENT((#284073)); +#284073 = SURFACE_STYLE_USAGE(.BOTH.,#284074); +#284074 = SURFACE_SIDE_STYLE('',(#284075)); +#284075 = SURFACE_STYLE_FILL_AREA(#284076); +#284076 = FILL_AREA_STYLE('',(#284077)); +#284077 = FILL_AREA_STYLE_COLOUR('',#283937); +#284078 = STYLED_ITEM('color',(#284079),#3952); +#284079 = PRESENTATION_STYLE_ASSIGNMENT((#284080)); +#284080 = SURFACE_STYLE_USAGE(.BOTH.,#284081); +#284081 = SURFACE_SIDE_STYLE('',(#284082)); +#284082 = SURFACE_STYLE_FILL_AREA(#284083); +#284083 = FILL_AREA_STYLE('',(#284084)); +#284084 = FILL_AREA_STYLE_COLOUR('',#283937); +#284085 = STYLED_ITEM('color',(#284086),#3976); +#284086 = PRESENTATION_STYLE_ASSIGNMENT((#284087)); +#284087 = SURFACE_STYLE_USAGE(.BOTH.,#284088); +#284088 = SURFACE_SIDE_STYLE('',(#284089)); +#284089 = SURFACE_STYLE_FILL_AREA(#284090); +#284090 = FILL_AREA_STYLE('',(#284091)); +#284091 = FILL_AREA_STYLE_COLOUR('',#283937); +#284092 = STYLED_ITEM('color',(#284093),#4032); +#284093 = PRESENTATION_STYLE_ASSIGNMENT((#284094)); +#284094 = SURFACE_STYLE_USAGE(.BOTH.,#284095); +#284095 = SURFACE_SIDE_STYLE('',(#284096)); +#284096 = SURFACE_STYLE_FILL_AREA(#284097); +#284097 = FILL_AREA_STYLE('',(#284098)); +#284098 = FILL_AREA_STYLE_COLOUR('',#283937); +#284099 = STYLED_ITEM('color',(#284100),#4049); +#284100 = PRESENTATION_STYLE_ASSIGNMENT((#284101)); +#284101 = SURFACE_STYLE_USAGE(.BOTH.,#284102); +#284102 = SURFACE_SIDE_STYLE('',(#284103)); +#284103 = SURFACE_STYLE_FILL_AREA(#284104); +#284104 = FILL_AREA_STYLE('',(#284105)); +#284105 = FILL_AREA_STYLE_COLOUR('',#283937); +#284106 = STYLED_ITEM('color',(#284107),#4080); +#284107 = PRESENTATION_STYLE_ASSIGNMENT((#284108)); +#284108 = SURFACE_STYLE_USAGE(.BOTH.,#284109); +#284109 = SURFACE_SIDE_STYLE('',(#284110)); +#284110 = SURFACE_STYLE_FILL_AREA(#284111); +#284111 = FILL_AREA_STYLE('',(#284112)); +#284112 = FILL_AREA_STYLE_COLOUR('',#283937); +#284113 = STYLED_ITEM('color',(#284114),#4104); +#284114 = PRESENTATION_STYLE_ASSIGNMENT((#284115)); +#284115 = SURFACE_STYLE_USAGE(.BOTH.,#284116); +#284116 = SURFACE_SIDE_STYLE('',(#284117)); +#284117 = SURFACE_STYLE_FILL_AREA(#284118); +#284118 = FILL_AREA_STYLE('',(#284119)); +#284119 = FILL_AREA_STYLE_COLOUR('',#283937); +#284120 = STYLED_ITEM('color',(#284121),#4128); +#284121 = PRESENTATION_STYLE_ASSIGNMENT((#284122)); +#284122 = SURFACE_STYLE_USAGE(.BOTH.,#284123); +#284123 = SURFACE_SIDE_STYLE('',(#284124)); +#284124 = SURFACE_STYLE_FILL_AREA(#284125); +#284125 = FILL_AREA_STYLE('',(#284126)); +#284126 = FILL_AREA_STYLE_COLOUR('',#283937); +#284127 = STYLED_ITEM('color',(#284128),#4145); +#284128 = PRESENTATION_STYLE_ASSIGNMENT((#284129)); +#284129 = SURFACE_STYLE_USAGE(.BOTH.,#284130); +#284130 = SURFACE_SIDE_STYLE('',(#284131)); +#284131 = SURFACE_STYLE_FILL_AREA(#284132); +#284132 = FILL_AREA_STYLE('',(#284133)); +#284133 = FILL_AREA_STYLE_COLOUR('',#283937); +#284134 = STYLED_ITEM('color',(#284135),#4176); +#284135 = PRESENTATION_STYLE_ASSIGNMENT((#284136)); +#284136 = SURFACE_STYLE_USAGE(.BOTH.,#284137); +#284137 = SURFACE_SIDE_STYLE('',(#284138)); +#284138 = SURFACE_STYLE_FILL_AREA(#284139); +#284139 = FILL_AREA_STYLE('',(#284140)); +#284140 = FILL_AREA_STYLE_COLOUR('',#283937); +#284141 = STYLED_ITEM('color',(#284142),#4200); +#284142 = PRESENTATION_STYLE_ASSIGNMENT((#284143)); +#284143 = SURFACE_STYLE_USAGE(.BOTH.,#284144); +#284144 = SURFACE_SIDE_STYLE('',(#284145)); +#284145 = SURFACE_STYLE_FILL_AREA(#284146); +#284146 = FILL_AREA_STYLE('',(#284147)); +#284147 = FILL_AREA_STYLE_COLOUR('',#283937); +#284148 = STYLED_ITEM('color',(#284149),#4224); +#284149 = PRESENTATION_STYLE_ASSIGNMENT((#284150)); +#284150 = SURFACE_STYLE_USAGE(.BOTH.,#284151); +#284151 = SURFACE_SIDE_STYLE('',(#284152)); +#284152 = SURFACE_STYLE_FILL_AREA(#284153); +#284153 = FILL_AREA_STYLE('',(#284154)); +#284154 = FILL_AREA_STYLE_COLOUR('',#283937); +#284155 = STYLED_ITEM('color',(#284156),#4241); +#284156 = PRESENTATION_STYLE_ASSIGNMENT((#284157)); +#284157 = SURFACE_STYLE_USAGE(.BOTH.,#284158); +#284158 = SURFACE_SIDE_STYLE('',(#284159)); +#284159 = SURFACE_STYLE_FILL_AREA(#284160); +#284160 = FILL_AREA_STYLE('',(#284161)); +#284161 = FILL_AREA_STYLE_COLOUR('',#283937); +#284162 = STYLED_ITEM('color',(#284163),#4272); +#284163 = PRESENTATION_STYLE_ASSIGNMENT((#284164)); +#284164 = SURFACE_STYLE_USAGE(.BOTH.,#284165); +#284165 = SURFACE_SIDE_STYLE('',(#284166)); +#284166 = SURFACE_STYLE_FILL_AREA(#284167); +#284167 = FILL_AREA_STYLE('',(#284168)); +#284168 = FILL_AREA_STYLE_COLOUR('',#283937); +#284169 = STYLED_ITEM('color',(#284170),#4296); +#284170 = PRESENTATION_STYLE_ASSIGNMENT((#284171)); +#284171 = SURFACE_STYLE_USAGE(.BOTH.,#284172); +#284172 = SURFACE_SIDE_STYLE('',(#284173)); +#284173 = SURFACE_STYLE_FILL_AREA(#284174); +#284174 = FILL_AREA_STYLE('',(#284175)); +#284175 = FILL_AREA_STYLE_COLOUR('',#283937); +#284176 = STYLED_ITEM('color',(#284177),#4320); +#284177 = PRESENTATION_STYLE_ASSIGNMENT((#284178)); +#284178 = SURFACE_STYLE_USAGE(.BOTH.,#284179); +#284179 = SURFACE_SIDE_STYLE('',(#284180)); +#284180 = SURFACE_STYLE_FILL_AREA(#284181); +#284181 = FILL_AREA_STYLE('',(#284182)); +#284182 = FILL_AREA_STYLE_COLOUR('',#283937); +#284183 = STYLED_ITEM('color',(#284184),#4337); +#284184 = PRESENTATION_STYLE_ASSIGNMENT((#284185)); +#284185 = SURFACE_STYLE_USAGE(.BOTH.,#284186); +#284186 = SURFACE_SIDE_STYLE('',(#284187)); +#284187 = SURFACE_STYLE_FILL_AREA(#284188); +#284188 = FILL_AREA_STYLE('',(#284189)); +#284189 = FILL_AREA_STYLE_COLOUR('',#283937); +#284190 = STYLED_ITEM('color',(#284191),#4384); +#284191 = PRESENTATION_STYLE_ASSIGNMENT((#284192)); +#284192 = SURFACE_STYLE_USAGE(.BOTH.,#284193); +#284193 = SURFACE_SIDE_STYLE('',(#284194)); +#284194 = SURFACE_STYLE_FILL_AREA(#284195); +#284195 = FILL_AREA_STYLE('',(#284196)); +#284196 = FILL_AREA_STYLE_COLOUR('',#283937); +#284197 = STYLED_ITEM('color',(#284198),#4415); +#284198 = PRESENTATION_STYLE_ASSIGNMENT((#284199)); +#284199 = SURFACE_STYLE_USAGE(.BOTH.,#284200); +#284200 = SURFACE_SIDE_STYLE('',(#284201)); +#284201 = SURFACE_STYLE_FILL_AREA(#284202); +#284202 = FILL_AREA_STYLE('',(#284203)); +#284203 = FILL_AREA_STYLE_COLOUR('',#283937); +#284204 = STYLED_ITEM('color',(#284205),#4427); +#284205 = PRESENTATION_STYLE_ASSIGNMENT((#284206)); +#284206 = SURFACE_STYLE_USAGE(.BOTH.,#284207); +#284207 = SURFACE_SIDE_STYLE('',(#284208)); +#284208 = SURFACE_STYLE_FILL_AREA(#284209); +#284209 = FILL_AREA_STYLE('',(#284210)); +#284210 = FILL_AREA_STYLE_COLOUR('',#283937); +#284211 = STYLED_ITEM('color',(#284212),#4444); +#284212 = PRESENTATION_STYLE_ASSIGNMENT((#284213)); +#284213 = SURFACE_STYLE_USAGE(.BOTH.,#284214); +#284214 = SURFACE_SIDE_STYLE('',(#284215)); +#284215 = SURFACE_STYLE_FILL_AREA(#284216); +#284216 = FILL_AREA_STYLE('',(#284217)); +#284217 = FILL_AREA_STYLE_COLOUR('',#283937); +#284218 = STYLED_ITEM('color',(#284219),#4470); +#284219 = PRESENTATION_STYLE_ASSIGNMENT((#284220)); +#284220 = SURFACE_STYLE_USAGE(.BOTH.,#284221); +#284221 = SURFACE_SIDE_STYLE('',(#284222)); +#284222 = SURFACE_STYLE_FILL_AREA(#284223); +#284223 = FILL_AREA_STYLE('',(#284224)); +#284224 = FILL_AREA_STYLE_COLOUR('',#283937); +#284225 = STYLED_ITEM('color',(#284226),#4503); +#284226 = PRESENTATION_STYLE_ASSIGNMENT((#284227)); +#284227 = SURFACE_STYLE_USAGE(.BOTH.,#284228); +#284228 = SURFACE_SIDE_STYLE('',(#284229)); +#284229 = SURFACE_STYLE_FILL_AREA(#284230); +#284230 = FILL_AREA_STYLE('',(#284231)); +#284231 = FILL_AREA_STYLE_COLOUR('',#283937); +#284232 = STYLED_ITEM('color',(#284233),#4534); +#284233 = PRESENTATION_STYLE_ASSIGNMENT((#284234)); +#284234 = SURFACE_STYLE_USAGE(.BOTH.,#284235); +#284235 = SURFACE_SIDE_STYLE('',(#284236)); +#284236 = SURFACE_STYLE_FILL_AREA(#284237); +#284237 = FILL_AREA_STYLE('',(#284238)); +#284238 = FILL_AREA_STYLE_COLOUR('',#283937); +#284239 = STYLED_ITEM('color',(#284240),#4558); +#284240 = PRESENTATION_STYLE_ASSIGNMENT((#284241)); +#284241 = SURFACE_STYLE_USAGE(.BOTH.,#284242); +#284242 = SURFACE_SIDE_STYLE('',(#284243)); +#284243 = SURFACE_STYLE_FILL_AREA(#284244); +#284244 = FILL_AREA_STYLE('',(#284245)); +#284245 = FILL_AREA_STYLE_COLOUR('',#283937); +#284246 = STYLED_ITEM('color',(#284247),#4582); +#284247 = PRESENTATION_STYLE_ASSIGNMENT((#284248)); +#284248 = SURFACE_STYLE_USAGE(.BOTH.,#284249); +#284249 = SURFACE_SIDE_STYLE('',(#284250)); +#284250 = SURFACE_STYLE_FILL_AREA(#284251); +#284251 = FILL_AREA_STYLE('',(#284252)); +#284252 = FILL_AREA_STYLE_COLOUR('',#283937); +#284253 = STYLED_ITEM('color',(#284254),#4599); +#284254 = PRESENTATION_STYLE_ASSIGNMENT((#284255)); +#284255 = SURFACE_STYLE_USAGE(.BOTH.,#284256); +#284256 = SURFACE_SIDE_STYLE('',(#284257)); +#284257 = SURFACE_STYLE_FILL_AREA(#284258); +#284258 = FILL_AREA_STYLE('',(#284259)); +#284259 = FILL_AREA_STYLE_COLOUR('',#283937); +#284260 = STYLED_ITEM('color',(#284261),#4646); +#284261 = PRESENTATION_STYLE_ASSIGNMENT((#284262)); +#284262 = SURFACE_STYLE_USAGE(.BOTH.,#284263); +#284263 = SURFACE_SIDE_STYLE('',(#284264)); +#284264 = SURFACE_STYLE_FILL_AREA(#284265); +#284265 = FILL_AREA_STYLE('',(#284266)); +#284266 = FILL_AREA_STYLE_COLOUR('',#283937); +#284267 = STYLED_ITEM('color',(#284268),#4677); +#284268 = PRESENTATION_STYLE_ASSIGNMENT((#284269)); +#284269 = SURFACE_STYLE_USAGE(.BOTH.,#284270); +#284270 = SURFACE_SIDE_STYLE('',(#284271)); +#284271 = SURFACE_STYLE_FILL_AREA(#284272); +#284272 = FILL_AREA_STYLE('',(#284273)); +#284273 = FILL_AREA_STYLE_COLOUR('',#283937); +#284274 = STYLED_ITEM('color',(#284275),#4689); +#284275 = PRESENTATION_STYLE_ASSIGNMENT((#284276)); +#284276 = SURFACE_STYLE_USAGE(.BOTH.,#284277); +#284277 = SURFACE_SIDE_STYLE('',(#284278)); +#284278 = SURFACE_STYLE_FILL_AREA(#284279); +#284279 = FILL_AREA_STYLE('',(#284280)); +#284280 = FILL_AREA_STYLE_COLOUR('',#283937); +#284281 = STYLED_ITEM('color',(#284282),#4706); +#284282 = PRESENTATION_STYLE_ASSIGNMENT((#284283)); +#284283 = SURFACE_STYLE_USAGE(.BOTH.,#284284); +#284284 = SURFACE_SIDE_STYLE('',(#284285)); +#284285 = SURFACE_STYLE_FILL_AREA(#284286); +#284286 = FILL_AREA_STYLE('',(#284287)); +#284287 = FILL_AREA_STYLE_COLOUR('',#283937); +#284288 = STYLED_ITEM('color',(#284289),#4732); +#284289 = PRESENTATION_STYLE_ASSIGNMENT((#284290)); +#284290 = SURFACE_STYLE_USAGE(.BOTH.,#284291); +#284291 = SURFACE_SIDE_STYLE('',(#284292)); +#284292 = SURFACE_STYLE_FILL_AREA(#284293); +#284293 = FILL_AREA_STYLE('',(#284294)); +#284294 = FILL_AREA_STYLE_COLOUR('',#283937); +#284295 = STYLED_ITEM('color',(#284296),#4765); +#284296 = PRESENTATION_STYLE_ASSIGNMENT((#284297)); +#284297 = SURFACE_STYLE_USAGE(.BOTH.,#284298); +#284298 = SURFACE_SIDE_STYLE('',(#284299)); +#284299 = SURFACE_STYLE_FILL_AREA(#284300); +#284300 = FILL_AREA_STYLE('',(#284301)); +#284301 = FILL_AREA_STYLE_COLOUR('',#283937); +#284302 = STYLED_ITEM('color',(#284303),#4777); +#284303 = PRESENTATION_STYLE_ASSIGNMENT((#284304)); +#284304 = SURFACE_STYLE_USAGE(.BOTH.,#284305); +#284305 = SURFACE_SIDE_STYLE('',(#284306)); +#284306 = SURFACE_STYLE_FILL_AREA(#284307); +#284307 = FILL_AREA_STYLE('',(#284308)); +#284308 = FILL_AREA_STYLE_COLOUR('',#283937); +#284309 = STYLED_ITEM('color',(#284310),#4789); +#284310 = PRESENTATION_STYLE_ASSIGNMENT((#284311)); +#284311 = SURFACE_STYLE_USAGE(.BOTH.,#284312); +#284312 = SURFACE_SIDE_STYLE('',(#284313)); +#284313 = SURFACE_STYLE_FILL_AREA(#284314); +#284314 = FILL_AREA_STYLE('',(#284315)); +#284315 = FILL_AREA_STYLE_COLOUR('',#283937); +#284316 = STYLED_ITEM('color',(#284317),#4801); +#284317 = PRESENTATION_STYLE_ASSIGNMENT((#284318)); +#284318 = SURFACE_STYLE_USAGE(.BOTH.,#284319); +#284319 = SURFACE_SIDE_STYLE('',(#284320)); +#284320 = SURFACE_STYLE_FILL_AREA(#284321); +#284321 = FILL_AREA_STYLE('',(#284322)); +#284322 = FILL_AREA_STYLE_COLOUR('',#283937); +#284323 = STYLED_ITEM('color',(#284324),#4818); +#284324 = PRESENTATION_STYLE_ASSIGNMENT((#284325)); +#284325 = SURFACE_STYLE_USAGE(.BOTH.,#284326); +#284326 = SURFACE_SIDE_STYLE('',(#284327)); +#284327 = SURFACE_STYLE_FILL_AREA(#284328); +#284328 = FILL_AREA_STYLE('',(#284329)); +#284329 = FILL_AREA_STYLE_COLOUR('',#283937); +#284330 = STYLED_ITEM('color',(#284331),#4835); +#284331 = PRESENTATION_STYLE_ASSIGNMENT((#284332)); +#284332 = SURFACE_STYLE_USAGE(.BOTH.,#284333); +#284333 = SURFACE_SIDE_STYLE('',(#284334)); +#284334 = SURFACE_STYLE_FILL_AREA(#284335); +#284335 = FILL_AREA_STYLE('',(#284336)); +#284336 = FILL_AREA_STYLE_COLOUR('',#283937); +#284337 = STYLED_ITEM('color',(#284338),#4847); +#284338 = PRESENTATION_STYLE_ASSIGNMENT((#284339)); +#284339 = SURFACE_STYLE_USAGE(.BOTH.,#284340); +#284340 = SURFACE_SIDE_STYLE('',(#284341)); +#284341 = SURFACE_STYLE_FILL_AREA(#284342); +#284342 = FILL_AREA_STYLE('',(#284343)); +#284343 = FILL_AREA_STYLE_COLOUR('',#283937); +#284344 = STYLED_ITEM('color',(#284345),#4859); +#284345 = PRESENTATION_STYLE_ASSIGNMENT((#284346)); +#284346 = SURFACE_STYLE_USAGE(.BOTH.,#284347); +#284347 = SURFACE_SIDE_STYLE('',(#284348)); +#284348 = SURFACE_STYLE_FILL_AREA(#284349); +#284349 = FILL_AREA_STYLE('',(#284350)); +#284350 = FILL_AREA_STYLE_COLOUR('',#283937); +#284351 = STYLED_ITEM('color',(#284352),#4876); +#284352 = PRESENTATION_STYLE_ASSIGNMENT((#284353)); +#284353 = SURFACE_STYLE_USAGE(.BOTH.,#284354); +#284354 = SURFACE_SIDE_STYLE('',(#284355)); +#284355 = SURFACE_STYLE_FILL_AREA(#284356); +#284356 = FILL_AREA_STYLE('',(#284357)); +#284357 = FILL_AREA_STYLE_COLOUR('',#283937); +#284358 = STYLED_ITEM('color',(#284359),#4893); +#284359 = PRESENTATION_STYLE_ASSIGNMENT((#284360)); +#284360 = SURFACE_STYLE_USAGE(.BOTH.,#284361); +#284361 = SURFACE_SIDE_STYLE('',(#284362)); +#284362 = SURFACE_STYLE_FILL_AREA(#284363); +#284363 = FILL_AREA_STYLE('',(#284364)); +#284364 = FILL_AREA_STYLE_COLOUR('',#283937); +#284365 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #284366,#284373,#284380,#284387,#284394,#284401,#284408,#284415, + #284422,#284429,#284436,#284443,#284450,#284457,#284464,#284471, + #284478,#284485,#284492,#284499,#284506,#284513,#284520,#284527, + #284534,#284541,#284548,#284555,#284562,#284569,#284576,#284583, + #284590,#284597,#284604,#284611,#284618,#284625,#284632,#284639, + #284646),#6160); +#284366 = STYLED_ITEM('color',(#284367),#4954); +#284367 = PRESENTATION_STYLE_ASSIGNMENT((#284368)); +#284368 = SURFACE_STYLE_USAGE(.BOTH.,#284369); +#284369 = SURFACE_SIDE_STYLE('',(#284370)); +#284370 = SURFACE_STYLE_FILL_AREA(#284371); +#284371 = FILL_AREA_STYLE('',(#284372)); +#284372 = FILL_AREA_STYLE_COLOUR('',#282540); +#284373 = STYLED_ITEM('color',(#284374),#4994); +#284374 = PRESENTATION_STYLE_ASSIGNMENT((#284375)); +#284375 = SURFACE_STYLE_USAGE(.BOTH.,#284376); +#284376 = SURFACE_SIDE_STYLE('',(#284377)); +#284377 = SURFACE_STYLE_FILL_AREA(#284378); +#284378 = FILL_AREA_STYLE('',(#284379)); +#284379 = FILL_AREA_STYLE_COLOUR('',#282540); +#284380 = STYLED_ITEM('color',(#284381),#5077); +#284381 = PRESENTATION_STYLE_ASSIGNMENT((#284382)); +#284382 = SURFACE_STYLE_USAGE(.BOTH.,#284383); +#284383 = SURFACE_SIDE_STYLE('',(#284384)); +#284384 = SURFACE_STYLE_FILL_AREA(#284385); +#284385 = FILL_AREA_STYLE('',(#284386)); +#284386 = FILL_AREA_STYLE_COLOUR('',#282540); +#284387 = STYLED_ITEM('color',(#284388),#5102); +#284388 = PRESENTATION_STYLE_ASSIGNMENT((#284389)); +#284389 = SURFACE_STYLE_USAGE(.BOTH.,#284390); +#284390 = SURFACE_SIDE_STYLE('',(#284391)); +#284391 = SURFACE_STYLE_FILL_AREA(#284392); +#284392 = FILL_AREA_STYLE('',(#284393)); +#284393 = FILL_AREA_STYLE_COLOUR('',#282540); +#284394 = STYLED_ITEM('color',(#284395),#5177); +#284395 = PRESENTATION_STYLE_ASSIGNMENT((#284396)); +#284396 = SURFACE_STYLE_USAGE(.BOTH.,#284397); +#284397 = SURFACE_SIDE_STYLE('',(#284398)); +#284398 = SURFACE_STYLE_FILL_AREA(#284399); +#284399 = FILL_AREA_STYLE('',(#284400)); +#284400 = FILL_AREA_STYLE_COLOUR('',#282540); +#284401 = STYLED_ITEM('color',(#284402),#5194); +#284402 = PRESENTATION_STYLE_ASSIGNMENT((#284403)); +#284403 = SURFACE_STYLE_USAGE(.BOTH.,#284404); +#284404 = SURFACE_SIDE_STYLE('',(#284405)); +#284405 = SURFACE_STYLE_FILL_AREA(#284406); +#284406 = FILL_AREA_STYLE('',(#284407)); +#284407 = FILL_AREA_STYLE_COLOUR('',#282540); +#284408 = STYLED_ITEM('color',(#284409),#5211); +#284409 = PRESENTATION_STYLE_ASSIGNMENT((#284410)); +#284410 = SURFACE_STYLE_USAGE(.BOTH.,#284411); +#284411 = SURFACE_SIDE_STYLE('',(#284412)); +#284412 = SURFACE_STYLE_FILL_AREA(#284413); +#284413 = FILL_AREA_STYLE('',(#284414)); +#284414 = FILL_AREA_STYLE_COLOUR('',#282540); +#284415 = STYLED_ITEM('color',(#284416),#5228); +#284416 = PRESENTATION_STYLE_ASSIGNMENT((#284417)); +#284417 = SURFACE_STYLE_USAGE(.BOTH.,#284418); +#284418 = SURFACE_SIDE_STYLE('',(#284419)); +#284419 = SURFACE_STYLE_FILL_AREA(#284420); +#284420 = FILL_AREA_STYLE('',(#284421)); +#284421 = FILL_AREA_STYLE_COLOUR('',#282540); +#284422 = STYLED_ITEM('color',(#284423),#5245); +#284423 = PRESENTATION_STYLE_ASSIGNMENT((#284424)); +#284424 = SURFACE_STYLE_USAGE(.BOTH.,#284425); +#284425 = SURFACE_SIDE_STYLE('',(#284426)); +#284426 = SURFACE_STYLE_FILL_AREA(#284427); +#284427 = FILL_AREA_STYLE('',(#284428)); +#284428 = FILL_AREA_STYLE_COLOUR('',#282540); +#284429 = STYLED_ITEM('color',(#284430),#5262); +#284430 = PRESENTATION_STYLE_ASSIGNMENT((#284431)); +#284431 = SURFACE_STYLE_USAGE(.BOTH.,#284432); +#284432 = SURFACE_SIDE_STYLE('',(#284433)); +#284433 = SURFACE_STYLE_FILL_AREA(#284434); +#284434 = FILL_AREA_STYLE('',(#284435)); +#284435 = FILL_AREA_STYLE_COLOUR('',#282540); +#284436 = STYLED_ITEM('color',(#284437),#5278); +#284437 = PRESENTATION_STYLE_ASSIGNMENT((#284438)); +#284438 = SURFACE_STYLE_USAGE(.BOTH.,#284439); +#284439 = SURFACE_SIDE_STYLE('',(#284440)); +#284440 = SURFACE_STYLE_FILL_AREA(#284441); +#284441 = FILL_AREA_STYLE('',(#284442)); +#284442 = FILL_AREA_STYLE_COLOUR('',#279624); +#284443 = STYLED_ITEM('color',(#284444),#5325); +#284444 = PRESENTATION_STYLE_ASSIGNMENT((#284445)); +#284445 = SURFACE_STYLE_USAGE(.BOTH.,#284446); +#284446 = SURFACE_SIDE_STYLE('',(#284447)); +#284447 = SURFACE_STYLE_FILL_AREA(#284448); +#284448 = FILL_AREA_STYLE('',(#284449)); +#284449 = FILL_AREA_STYLE_COLOUR('',#279624); +#284450 = STYLED_ITEM('color',(#284451),#5360); +#284451 = PRESENTATION_STYLE_ASSIGNMENT((#284452)); +#284452 = SURFACE_STYLE_USAGE(.BOTH.,#284453); +#284453 = SURFACE_SIDE_STYLE('',(#284454)); +#284454 = SURFACE_STYLE_FILL_AREA(#284455); +#284455 = FILL_AREA_STYLE('',(#284456)); +#284456 = FILL_AREA_STYLE_COLOUR('',#279624); +#284457 = STYLED_ITEM('color',(#284458),#5399); +#284458 = PRESENTATION_STYLE_ASSIGNMENT((#284459)); +#284459 = SURFACE_STYLE_USAGE(.BOTH.,#284460); +#284460 = SURFACE_SIDE_STYLE('',(#284461)); +#284461 = SURFACE_STYLE_FILL_AREA(#284462); +#284462 = FILL_AREA_STYLE('',(#284463)); +#284463 = FILL_AREA_STYLE_COLOUR('',#279624); +#284464 = STYLED_ITEM('color',(#284465),#5428); +#284465 = PRESENTATION_STYLE_ASSIGNMENT((#284466)); +#284466 = SURFACE_STYLE_USAGE(.BOTH.,#284467); +#284467 = SURFACE_SIDE_STYLE('',(#284468)); +#284468 = SURFACE_STYLE_FILL_AREA(#284469); +#284469 = FILL_AREA_STYLE('',(#284470)); +#284470 = FILL_AREA_STYLE_COLOUR('',#279624); +#284471 = STYLED_ITEM('color',(#284472),#5467); +#284472 = PRESENTATION_STYLE_ASSIGNMENT((#284473)); +#284473 = SURFACE_STYLE_USAGE(.BOTH.,#284474); +#284474 = SURFACE_SIDE_STYLE('',(#284475)); +#284475 = SURFACE_STYLE_FILL_AREA(#284476); +#284476 = FILL_AREA_STYLE('',(#284477)); +#284477 = FILL_AREA_STYLE_COLOUR('',#279624); +#284478 = STYLED_ITEM('color',(#284479),#5496); +#284479 = PRESENTATION_STYLE_ASSIGNMENT((#284480)); +#284480 = SURFACE_STYLE_USAGE(.BOTH.,#284481); +#284481 = SURFACE_SIDE_STYLE('',(#284482)); +#284482 = SURFACE_STYLE_FILL_AREA(#284483); +#284483 = FILL_AREA_STYLE('',(#284484)); +#284484 = FILL_AREA_STYLE_COLOUR('',#279624); +#284485 = STYLED_ITEM('color',(#284486),#5550); +#284486 = PRESENTATION_STYLE_ASSIGNMENT((#284487)); +#284487 = SURFACE_STYLE_USAGE(.BOTH.,#284488); +#284488 = SURFACE_SIDE_STYLE('',(#284489)); +#284489 = SURFACE_STYLE_FILL_AREA(#284490); +#284490 = FILL_AREA_STYLE('',(#284491)); +#284491 = FILL_AREA_STYLE_COLOUR('',#279624); +#284492 = STYLED_ITEM('color',(#284493),#5593); +#284493 = PRESENTATION_STYLE_ASSIGNMENT((#284494)); +#284494 = SURFACE_STYLE_USAGE(.BOTH.,#284495); +#284495 = SURFACE_SIDE_STYLE('',(#284496)); +#284496 = SURFACE_STYLE_FILL_AREA(#284497); +#284497 = FILL_AREA_STYLE('',(#284498)); +#284498 = FILL_AREA_STYLE_COLOUR('',#279624); +#284499 = STYLED_ITEM('color',(#284500),#5616); +#284500 = PRESENTATION_STYLE_ASSIGNMENT((#284501)); +#284501 = SURFACE_STYLE_USAGE(.BOTH.,#284502); +#284502 = SURFACE_SIDE_STYLE('',(#284503)); +#284503 = SURFACE_STYLE_FILL_AREA(#284504); +#284504 = FILL_AREA_STYLE('',(#284505)); +#284505 = FILL_AREA_STYLE_COLOUR('',#279624); +#284506 = STYLED_ITEM('color',(#284507),#5639); +#284507 = PRESENTATION_STYLE_ASSIGNMENT((#284508)); +#284508 = SURFACE_STYLE_USAGE(.BOTH.,#284509); +#284509 = SURFACE_SIDE_STYLE('',(#284510)); +#284510 = SURFACE_STYLE_FILL_AREA(#284511); +#284511 = FILL_AREA_STYLE('',(#284512)); +#284512 = FILL_AREA_STYLE_COLOUR('',#279624); +#284513 = STYLED_ITEM('color',(#284514),#5662); +#284514 = PRESENTATION_STYLE_ASSIGNMENT((#284515)); +#284515 = SURFACE_STYLE_USAGE(.BOTH.,#284516); +#284516 = SURFACE_SIDE_STYLE('',(#284517)); +#284517 = SURFACE_STYLE_FILL_AREA(#284518); +#284518 = FILL_AREA_STYLE('',(#284519)); +#284519 = FILL_AREA_STYLE_COLOUR('',#279624); +#284520 = STYLED_ITEM('color',(#284521),#5713); +#284521 = PRESENTATION_STYLE_ASSIGNMENT((#284522)); +#284522 = SURFACE_STYLE_USAGE(.BOTH.,#284523); +#284523 = SURFACE_SIDE_STYLE('',(#284524)); +#284524 = SURFACE_STYLE_FILL_AREA(#284525); +#284525 = FILL_AREA_STYLE('',(#284526)); +#284526 = FILL_AREA_STYLE_COLOUR('',#279624); +#284527 = STYLED_ITEM('color',(#284528),#5736); +#284528 = PRESENTATION_STYLE_ASSIGNMENT((#284529)); +#284529 = SURFACE_STYLE_USAGE(.BOTH.,#284530); +#284530 = SURFACE_SIDE_STYLE('',(#284531)); +#284531 = SURFACE_STYLE_FILL_AREA(#284532); +#284532 = FILL_AREA_STYLE('',(#284533)); +#284533 = FILL_AREA_STYLE_COLOUR('',#279624); +#284534 = STYLED_ITEM('color',(#284535),#5753); +#284535 = PRESENTATION_STYLE_ASSIGNMENT((#284536)); +#284536 = SURFACE_STYLE_USAGE(.BOTH.,#284537); +#284537 = SURFACE_SIDE_STYLE('',(#284538)); +#284538 = SURFACE_STYLE_FILL_AREA(#284539); +#284539 = FILL_AREA_STYLE('',(#284540)); +#284540 = FILL_AREA_STYLE_COLOUR('',#282540); +#284541 = STYLED_ITEM('color',(#284542),#5827); +#284542 = PRESENTATION_STYLE_ASSIGNMENT((#284543)); +#284543 = SURFACE_STYLE_USAGE(.BOTH.,#284544); +#284544 = SURFACE_SIDE_STYLE('',(#284545)); +#284545 = SURFACE_STYLE_FILL_AREA(#284546); +#284546 = FILL_AREA_STYLE('',(#284547)); +#284547 = FILL_AREA_STYLE_COLOUR('',#282540); +#284548 = STYLED_ITEM('color',(#284549),#5851); +#284549 = PRESENTATION_STYLE_ASSIGNMENT((#284550)); +#284550 = SURFACE_STYLE_USAGE(.BOTH.,#284551); +#284551 = SURFACE_SIDE_STYLE('',(#284552)); +#284552 = SURFACE_STYLE_FILL_AREA(#284553); +#284553 = FILL_AREA_STYLE('',(#284554)); +#284554 = FILL_AREA_STYLE_COLOUR('',#282540); +#284555 = STYLED_ITEM('color',(#284556),#5918); +#284556 = PRESENTATION_STYLE_ASSIGNMENT((#284557)); +#284557 = SURFACE_STYLE_USAGE(.BOTH.,#284558); +#284558 = SURFACE_SIDE_STYLE('',(#284559)); +#284559 = SURFACE_STYLE_FILL_AREA(#284560); +#284560 = FILL_AREA_STYLE('',(#284561)); +#284561 = FILL_AREA_STYLE_COLOUR('',#279624); +#284562 = STYLED_ITEM('color',(#284563),#5930); +#284563 = PRESENTATION_STYLE_ASSIGNMENT((#284564)); +#284564 = SURFACE_STYLE_USAGE(.BOTH.,#284565); +#284565 = SURFACE_SIDE_STYLE('',(#284566)); +#284566 = SURFACE_STYLE_FILL_AREA(#284567); +#284567 = FILL_AREA_STYLE('',(#284568)); +#284568 = FILL_AREA_STYLE_COLOUR('',#279624); +#284569 = STYLED_ITEM('color',(#284570),#5942); +#284570 = PRESENTATION_STYLE_ASSIGNMENT((#284571)); +#284571 = SURFACE_STYLE_USAGE(.BOTH.,#284572); +#284572 = SURFACE_SIDE_STYLE('',(#284573)); +#284573 = SURFACE_STYLE_FILL_AREA(#284574); +#284574 = FILL_AREA_STYLE('',(#284575)); +#284575 = FILL_AREA_STYLE_COLOUR('',#282540); +#284576 = STYLED_ITEM('color',(#284577),#5959); +#284577 = PRESENTATION_STYLE_ASSIGNMENT((#284578)); +#284578 = SURFACE_STYLE_USAGE(.BOTH.,#284579); +#284579 = SURFACE_SIDE_STYLE('',(#284580)); +#284580 = SURFACE_STYLE_FILL_AREA(#284581); +#284581 = FILL_AREA_STYLE('',(#284582)); +#284582 = FILL_AREA_STYLE_COLOUR('',#282905); +#284583 = STYLED_ITEM('color',(#284584),#5988); +#284584 = PRESENTATION_STYLE_ASSIGNMENT((#284585)); +#284585 = SURFACE_STYLE_USAGE(.BOTH.,#284586); +#284586 = SURFACE_SIDE_STYLE('',(#284587)); +#284587 = SURFACE_STYLE_FILL_AREA(#284588); +#284588 = FILL_AREA_STYLE('',(#284589)); +#284589 = FILL_AREA_STYLE_COLOUR('',#282905); +#284590 = STYLED_ITEM('color',(#284591),#6011); +#284591 = PRESENTATION_STYLE_ASSIGNMENT((#284592)); +#284592 = SURFACE_STYLE_USAGE(.BOTH.,#284593); +#284593 = SURFACE_SIDE_STYLE('',(#284594)); +#284594 = SURFACE_STYLE_FILL_AREA(#284595); +#284595 = FILL_AREA_STYLE('',(#284596)); +#284596 = FILL_AREA_STYLE_COLOUR('',#282905); +#284597 = STYLED_ITEM('color',(#284598),#6034); +#284598 = PRESENTATION_STYLE_ASSIGNMENT((#284599)); +#284599 = SURFACE_STYLE_USAGE(.BOTH.,#284600); +#284600 = SURFACE_SIDE_STYLE('',(#284601)); +#284601 = SURFACE_STYLE_FILL_AREA(#284602); +#284602 = FILL_AREA_STYLE('',(#284603)); +#284603 = FILL_AREA_STYLE_COLOUR('',#282905); +#284604 = STYLED_ITEM('color',(#284605),#6051); +#284605 = PRESENTATION_STYLE_ASSIGNMENT((#284606)); +#284606 = SURFACE_STYLE_USAGE(.BOTH.,#284607); +#284607 = SURFACE_SIDE_STYLE('',(#284608)); +#284608 = SURFACE_STYLE_FILL_AREA(#284609); +#284609 = FILL_AREA_STYLE('',(#284610)); +#284610 = FILL_AREA_STYLE_COLOUR('',#282540); +#284611 = STYLED_ITEM('color',(#284612),#6073); +#284612 = PRESENTATION_STYLE_ASSIGNMENT((#284613)); +#284613 = SURFACE_STYLE_USAGE(.BOTH.,#284614); +#284614 = SURFACE_SIDE_STYLE('',(#284615)); +#284615 = SURFACE_STYLE_FILL_AREA(#284616); +#284616 = FILL_AREA_STYLE('',(#284617)); +#284617 = FILL_AREA_STYLE_COLOUR('',#282540); +#284618 = STYLED_ITEM('color',(#284619),#6085); +#284619 = PRESENTATION_STYLE_ASSIGNMENT((#284620)); +#284620 = SURFACE_STYLE_USAGE(.BOTH.,#284621); +#284621 = SURFACE_SIDE_STYLE('',(#284622)); +#284622 = SURFACE_STYLE_FILL_AREA(#284623); +#284623 = FILL_AREA_STYLE('',(#284624)); +#284624 = FILL_AREA_STYLE_COLOUR('',#282540); +#284625 = STYLED_ITEM('color',(#284626),#6102); +#284626 = PRESENTATION_STYLE_ASSIGNMENT((#284627)); +#284627 = SURFACE_STYLE_USAGE(.BOTH.,#284628); +#284628 = SURFACE_SIDE_STYLE('',(#284629)); +#284629 = SURFACE_STYLE_FILL_AREA(#284630); +#284630 = FILL_AREA_STYLE('',(#284631)); +#284631 = FILL_AREA_STYLE_COLOUR('',#282540); +#284632 = STYLED_ITEM('color',(#284633),#6119); +#284633 = PRESENTATION_STYLE_ASSIGNMENT((#284634)); +#284634 = SURFACE_STYLE_USAGE(.BOTH.,#284635); +#284635 = SURFACE_SIDE_STYLE('',(#284636)); +#284636 = SURFACE_STYLE_FILL_AREA(#284637); +#284637 = FILL_AREA_STYLE('',(#284638)); +#284638 = FILL_AREA_STYLE_COLOUR('',#282540); +#284639 = STYLED_ITEM('color',(#284640),#6136); +#284640 = PRESENTATION_STYLE_ASSIGNMENT((#284641)); +#284641 = SURFACE_STYLE_USAGE(.BOTH.,#284642); +#284642 = SURFACE_SIDE_STYLE('',(#284643)); +#284643 = SURFACE_STYLE_FILL_AREA(#284644); +#284644 = FILL_AREA_STYLE('',(#284645)); +#284645 = FILL_AREA_STYLE_COLOUR('',#282540); +#284646 = STYLED_ITEM('color',(#284647),#6148); +#284647 = PRESENTATION_STYLE_ASSIGNMENT((#284648)); +#284648 = SURFACE_STYLE_USAGE(.BOTH.,#284649); +#284649 = SURFACE_SIDE_STYLE('',(#284650)); +#284650 = SURFACE_STYLE_FILL_AREA(#284651); +#284651 = FILL_AREA_STYLE('',(#284652)); +#284652 = FILL_AREA_STYLE_COLOUR('',#282905); +#284653 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #284654,#284661,#284668,#284675,#284682,#284689,#284696,#284703, + #284710,#284717,#284724,#284731,#284738,#284745,#284752,#284759, + #284766,#284773,#284780,#284787,#284794,#284801,#284808,#284815, + #284822,#284829,#284836,#284843,#284850,#284857,#284864,#284871, + #284878,#284885,#284892,#284899,#284906,#284913,#284920,#284927, + #284934),#90367); +#284654 = STYLED_ITEM('color',(#284655),#89004); +#284655 = PRESENTATION_STYLE_ASSIGNMENT((#284656)); +#284656 = SURFACE_STYLE_USAGE(.BOTH.,#284657); +#284657 = SURFACE_SIDE_STYLE('',(#284658)); +#284658 = SURFACE_STYLE_FILL_AREA(#284659); +#284659 = FILL_AREA_STYLE('',(#284660)); +#284660 = FILL_AREA_STYLE_COLOUR('',#282540); +#284661 = STYLED_ITEM('color',(#284662),#89047); +#284662 = PRESENTATION_STYLE_ASSIGNMENT((#284663)); +#284663 = SURFACE_STYLE_USAGE(.BOTH.,#284664); +#284664 = SURFACE_SIDE_STYLE('',(#284665)); +#284665 = SURFACE_STYLE_FILL_AREA(#284666); +#284666 = FILL_AREA_STYLE('',(#284667)); +#284667 = FILL_AREA_STYLE_COLOUR('',#282540); +#284668 = STYLED_ITEM('color',(#284669),#89073); +#284669 = PRESENTATION_STYLE_ASSIGNMENT((#284670)); +#284670 = SURFACE_STYLE_USAGE(.BOTH.,#284671); +#284671 = SURFACE_SIDE_STYLE('',(#284672)); +#284672 = SURFACE_STYLE_FILL_AREA(#284673); +#284673 = FILL_AREA_STYLE('',(#284674)); +#284674 = FILL_AREA_STYLE_COLOUR('',#282540); +#284675 = STYLED_ITEM('color',(#284676),#89146); +#284676 = PRESENTATION_STYLE_ASSIGNMENT((#284677)); +#284677 = SURFACE_STYLE_USAGE(.BOTH.,#284678); +#284678 = SURFACE_SIDE_STYLE('',(#284679)); +#284679 = SURFACE_STYLE_FILL_AREA(#284680); +#284680 = FILL_AREA_STYLE('',(#284681)); +#284681 = FILL_AREA_STYLE_COLOUR('',#279624); +#284682 = STYLED_ITEM('color',(#284683),#89225); +#284683 = PRESENTATION_STYLE_ASSIGNMENT((#284684)); +#284684 = SURFACE_STYLE_USAGE(.BOTH.,#284685); +#284685 = SURFACE_SIDE_STYLE('',(#284686)); +#284686 = SURFACE_STYLE_FILL_AREA(#284687); +#284687 = FILL_AREA_STYLE('',(#284688)); +#284688 = FILL_AREA_STYLE_COLOUR('',#282540); +#284689 = STYLED_ITEM('color',(#284690),#89265); +#284690 = PRESENTATION_STYLE_ASSIGNMENT((#284691)); +#284691 = SURFACE_STYLE_USAGE(.BOTH.,#284692); +#284692 = SURFACE_SIDE_STYLE('',(#284693)); +#284693 = SURFACE_STYLE_FILL_AREA(#284694); +#284694 = FILL_AREA_STYLE('',(#284695)); +#284695 = FILL_AREA_STYLE_COLOUR('',#279624); +#284696 = STYLED_ITEM('color',(#284697),#89344); +#284697 = PRESENTATION_STYLE_ASSIGNMENT((#284698)); +#284698 = SURFACE_STYLE_USAGE(.BOTH.,#284699); +#284699 = SURFACE_SIDE_STYLE('',(#284700)); +#284700 = SURFACE_STYLE_FILL_AREA(#284701); +#284701 = FILL_AREA_STYLE('',(#284702)); +#284702 = FILL_AREA_STYLE_COLOUR('',#279624); +#284703 = STYLED_ITEM('color',(#284704),#89369); +#284704 = PRESENTATION_STYLE_ASSIGNMENT((#284705)); +#284705 = SURFACE_STYLE_USAGE(.BOTH.,#284706); +#284706 = SURFACE_SIDE_STYLE('',(#284707)); +#284707 = SURFACE_STYLE_FILL_AREA(#284708); +#284708 = FILL_AREA_STYLE('',(#284709)); +#284709 = FILL_AREA_STYLE_COLOUR('',#279624); +#284710 = STYLED_ITEM('color',(#284711),#89394); +#284711 = PRESENTATION_STYLE_ASSIGNMENT((#284712)); +#284712 = SURFACE_STYLE_USAGE(.BOTH.,#284713); +#284713 = SURFACE_SIDE_STYLE('',(#284714)); +#284714 = SURFACE_STYLE_FILL_AREA(#284715); +#284715 = FILL_AREA_STYLE('',(#284716)); +#284716 = FILL_AREA_STYLE_COLOUR('',#279624); +#284717 = STYLED_ITEM('color',(#284718),#89450); +#284718 = PRESENTATION_STYLE_ASSIGNMENT((#284719)); +#284719 = SURFACE_STYLE_USAGE(.BOTH.,#284720); +#284720 = SURFACE_SIDE_STYLE('',(#284721)); +#284721 = SURFACE_STYLE_FILL_AREA(#284722); +#284722 = FILL_AREA_STYLE('',(#284723)); +#284723 = FILL_AREA_STYLE_COLOUR('',#279624); +#284724 = STYLED_ITEM('color',(#284725),#89506); +#284725 = PRESENTATION_STYLE_ASSIGNMENT((#284726)); +#284726 = SURFACE_STYLE_USAGE(.BOTH.,#284727); +#284727 = SURFACE_SIDE_STYLE('',(#284728)); +#284728 = SURFACE_STYLE_FILL_AREA(#284729); +#284729 = FILL_AREA_STYLE('',(#284730)); +#284730 = FILL_AREA_STYLE_COLOUR('',#279624); +#284731 = STYLED_ITEM('color',(#284732),#89531); +#284732 = PRESENTATION_STYLE_ASSIGNMENT((#284733)); +#284733 = SURFACE_STYLE_USAGE(.BOTH.,#284734); +#284734 = SURFACE_SIDE_STYLE('',(#284735)); +#284735 = SURFACE_STYLE_FILL_AREA(#284736); +#284736 = FILL_AREA_STYLE('',(#284737)); +#284737 = FILL_AREA_STYLE_COLOUR('',#279624); +#284738 = STYLED_ITEM('color',(#284739),#89556); +#284739 = PRESENTATION_STYLE_ASSIGNMENT((#284740)); +#284740 = SURFACE_STYLE_USAGE(.BOTH.,#284741); +#284741 = SURFACE_SIDE_STYLE('',(#284742)); +#284742 = SURFACE_STYLE_FILL_AREA(#284743); +#284743 = FILL_AREA_STYLE('',(#284744)); +#284744 = FILL_AREA_STYLE_COLOUR('',#279624); +#284745 = STYLED_ITEM('color',(#284746),#89621); +#284746 = PRESENTATION_STYLE_ASSIGNMENT((#284747)); +#284747 = SURFACE_STYLE_USAGE(.BOTH.,#284748); +#284748 = SURFACE_SIDE_STYLE('',(#284749)); +#284749 = SURFACE_STYLE_FILL_AREA(#284750); +#284750 = FILL_AREA_STYLE('',(#284751)); +#284751 = FILL_AREA_STYLE_COLOUR('',#282540); +#284752 = STYLED_ITEM('color',(#284753),#89694); +#284753 = PRESENTATION_STYLE_ASSIGNMENT((#284754)); +#284754 = SURFACE_STYLE_USAGE(.BOTH.,#284755); +#284755 = SURFACE_SIDE_STYLE('',(#284756)); +#284756 = SURFACE_STYLE_FILL_AREA(#284757); +#284757 = FILL_AREA_STYLE('',(#284758)); +#284758 = FILL_AREA_STYLE_COLOUR('',#279624); +#284759 = STYLED_ITEM('color',(#284760),#89780); +#284760 = PRESENTATION_STYLE_ASSIGNMENT((#284761)); +#284761 = SURFACE_STYLE_USAGE(.BOTH.,#284762); +#284762 = SURFACE_SIDE_STYLE('',(#284763)); +#284763 = SURFACE_STYLE_FILL_AREA(#284764); +#284764 = FILL_AREA_STYLE('',(#284765)); +#284765 = FILL_AREA_STYLE_COLOUR('',#279624); +#284766 = STYLED_ITEM('color',(#284767),#89797); +#284767 = PRESENTATION_STYLE_ASSIGNMENT((#284768)); +#284768 = SURFACE_STYLE_USAGE(.BOTH.,#284769); +#284769 = SURFACE_SIDE_STYLE('',(#284770)); +#284770 = SURFACE_STYLE_FILL_AREA(#284771); +#284771 = FILL_AREA_STYLE('',(#284772)); +#284772 = FILL_AREA_STYLE_COLOUR('',#282540); +#284773 = STYLED_ITEM('color',(#284774),#89828); +#284774 = PRESENTATION_STYLE_ASSIGNMENT((#284775)); +#284775 = SURFACE_STYLE_USAGE(.BOTH.,#284776); +#284776 = SURFACE_SIDE_STYLE('',(#284777)); +#284777 = SURFACE_STYLE_FILL_AREA(#284778); +#284778 = FILL_AREA_STYLE('',(#284779)); +#284779 = FILL_AREA_STYLE_COLOUR('',#279624); +#284780 = STYLED_ITEM('color',(#284781),#89840); +#284781 = PRESENTATION_STYLE_ASSIGNMENT((#284782)); +#284782 = SURFACE_STYLE_USAGE(.BOTH.,#284783); +#284783 = SURFACE_SIDE_STYLE('',(#284784)); +#284784 = SURFACE_STYLE_FILL_AREA(#284785); +#284785 = FILL_AREA_STYLE('',(#284786)); +#284786 = FILL_AREA_STYLE_COLOUR('',#279624); +#284787 = STYLED_ITEM('color',(#284788),#89857); +#284788 = PRESENTATION_STYLE_ASSIGNMENT((#284789)); +#284789 = SURFACE_STYLE_USAGE(.BOTH.,#284790); +#284790 = SURFACE_SIDE_STYLE('',(#284791)); +#284791 = SURFACE_STYLE_FILL_AREA(#284792); +#284792 = FILL_AREA_STYLE('',(#284793)); +#284793 = FILL_AREA_STYLE_COLOUR('',#279624); +#284794 = STYLED_ITEM('color',(#284795),#89869); +#284795 = PRESENTATION_STYLE_ASSIGNMENT((#284796)); +#284796 = SURFACE_STYLE_USAGE(.BOTH.,#284797); +#284797 = SURFACE_SIDE_STYLE('',(#284798)); +#284798 = SURFACE_STYLE_FILL_AREA(#284799); +#284799 = FILL_AREA_STYLE('',(#284800)); +#284800 = FILL_AREA_STYLE_COLOUR('',#279624); +#284801 = STYLED_ITEM('color',(#284802),#89887); +#284802 = PRESENTATION_STYLE_ASSIGNMENT((#284803)); +#284803 = SURFACE_STYLE_USAGE(.BOTH.,#284804); +#284804 = SURFACE_SIDE_STYLE('',(#284805)); +#284805 = SURFACE_STYLE_FILL_AREA(#284806); +#284806 = FILL_AREA_STYLE('',(#284807)); +#284807 = FILL_AREA_STYLE_COLOUR('',#279624); +#284808 = STYLED_ITEM('color',(#284809),#89899); +#284809 = PRESENTATION_STYLE_ASSIGNMENT((#284810)); +#284810 = SURFACE_STYLE_USAGE(.BOTH.,#284811); +#284811 = SURFACE_SIDE_STYLE('',(#284812)); +#284812 = SURFACE_STYLE_FILL_AREA(#284813); +#284813 = FILL_AREA_STYLE('',(#284814)); +#284814 = FILL_AREA_STYLE_COLOUR('',#279624); +#284815 = STYLED_ITEM('color',(#284816),#89917); +#284816 = PRESENTATION_STYLE_ASSIGNMENT((#284817)); +#284817 = SURFACE_STYLE_USAGE(.BOTH.,#284818); +#284818 = SURFACE_SIDE_STYLE('',(#284819)); +#284819 = SURFACE_STYLE_FILL_AREA(#284820); +#284820 = FILL_AREA_STYLE('',(#284821)); +#284821 = FILL_AREA_STYLE_COLOUR('',#279624); +#284822 = STYLED_ITEM('color',(#284823),#89929); +#284823 = PRESENTATION_STYLE_ASSIGNMENT((#284824)); +#284824 = SURFACE_STYLE_USAGE(.BOTH.,#284825); +#284825 = SURFACE_SIDE_STYLE('',(#284826)); +#284826 = SURFACE_STYLE_FILL_AREA(#284827); +#284827 = FILL_AREA_STYLE('',(#284828)); +#284828 = FILL_AREA_STYLE_COLOUR('',#282540); +#284829 = STYLED_ITEM('color',(#284830),#89960); +#284830 = PRESENTATION_STYLE_ASSIGNMENT((#284831)); +#284831 = SURFACE_STYLE_USAGE(.BOTH.,#284832); +#284832 = SURFACE_SIDE_STYLE('',(#284833)); +#284833 = SURFACE_STYLE_FILL_AREA(#284834); +#284834 = FILL_AREA_STYLE('',(#284835)); +#284835 = FILL_AREA_STYLE_COLOUR('',#282540); +#284836 = STYLED_ITEM('color',(#284837),#90012); +#284837 = PRESENTATION_STYLE_ASSIGNMENT((#284838)); +#284838 = SURFACE_STYLE_USAGE(.BOTH.,#284839); +#284839 = SURFACE_SIDE_STYLE('',(#284840)); +#284840 = SURFACE_STYLE_FILL_AREA(#284841); +#284841 = FILL_AREA_STYLE('',(#284842)); +#284842 = FILL_AREA_STYLE_COLOUR('',#282540); +#284843 = STYLED_ITEM('color',(#284844),#90044); +#284844 = PRESENTATION_STYLE_ASSIGNMENT((#284845)); +#284845 = SURFACE_STYLE_USAGE(.BOTH.,#284846); +#284846 = SURFACE_SIDE_STYLE('',(#284847)); +#284847 = SURFACE_STYLE_FILL_AREA(#284848); +#284848 = FILL_AREA_STYLE('',(#284849)); +#284849 = FILL_AREA_STYLE_COLOUR('',#282540); +#284850 = STYLED_ITEM('color',(#284851),#90069); +#284851 = PRESENTATION_STYLE_ASSIGNMENT((#284852)); +#284852 = SURFACE_STYLE_USAGE(.BOTH.,#284853); +#284853 = SURFACE_SIDE_STYLE('',(#284854)); +#284854 = SURFACE_STYLE_FILL_AREA(#284855); +#284855 = FILL_AREA_STYLE('',(#284856)); +#284856 = FILL_AREA_STYLE_COLOUR('',#282540); +#284857 = STYLED_ITEM('color',(#284858),#90094); +#284858 = PRESENTATION_STYLE_ASSIGNMENT((#284859)); +#284859 = SURFACE_STYLE_USAGE(.BOTH.,#284860); +#284860 = SURFACE_SIDE_STYLE('',(#284861)); +#284861 = SURFACE_STYLE_FILL_AREA(#284862); +#284862 = FILL_AREA_STYLE('',(#284863)); +#284863 = FILL_AREA_STYLE_COLOUR('',#282540); +#284864 = STYLED_ITEM('color',(#284865),#90126); +#284865 = PRESENTATION_STYLE_ASSIGNMENT((#284866)); +#284866 = SURFACE_STYLE_USAGE(.BOTH.,#284867); +#284867 = SURFACE_SIDE_STYLE('',(#284868)); +#284868 = SURFACE_STYLE_FILL_AREA(#284869); +#284869 = FILL_AREA_STYLE('',(#284870)); +#284870 = FILL_AREA_STYLE_COLOUR('',#282540); +#284871 = STYLED_ITEM('color',(#284872),#90151); +#284872 = PRESENTATION_STYLE_ASSIGNMENT((#284873)); +#284873 = SURFACE_STYLE_USAGE(.BOTH.,#284874); +#284874 = SURFACE_SIDE_STYLE('',(#284875)); +#284875 = SURFACE_STYLE_FILL_AREA(#284876); +#284876 = FILL_AREA_STYLE('',(#284877)); +#284877 = FILL_AREA_STYLE_COLOUR('',#282540); +#284878 = STYLED_ITEM('color',(#284879),#90176); +#284879 = PRESENTATION_STYLE_ASSIGNMENT((#284880)); +#284880 = SURFACE_STYLE_USAGE(.BOTH.,#284881); +#284881 = SURFACE_SIDE_STYLE('',(#284882)); +#284882 = SURFACE_STYLE_FILL_AREA(#284883); +#284883 = FILL_AREA_STYLE('',(#284884)); +#284884 = FILL_AREA_STYLE_COLOUR('',#282540); +#284885 = STYLED_ITEM('color',(#284886),#90193); +#284886 = PRESENTATION_STYLE_ASSIGNMENT((#284887)); +#284887 = SURFACE_STYLE_USAGE(.BOTH.,#284888); +#284888 = SURFACE_SIDE_STYLE('',(#284889)); +#284889 = SURFACE_STYLE_FILL_AREA(#284890); +#284890 = FILL_AREA_STYLE('',(#284891)); +#284891 = FILL_AREA_STYLE_COLOUR('',#282540); +#284892 = STYLED_ITEM('color',(#284893),#90210); +#284893 = PRESENTATION_STYLE_ASSIGNMENT((#284894)); +#284894 = SURFACE_STYLE_USAGE(.BOTH.,#284895); +#284895 = SURFACE_SIDE_STYLE('',(#284896)); +#284896 = SURFACE_STYLE_FILL_AREA(#284897); +#284897 = FILL_AREA_STYLE('',(#284898)); +#284898 = FILL_AREA_STYLE_COLOUR('',#282540); +#284899 = STYLED_ITEM('color',(#284900),#90258); +#284900 = PRESENTATION_STYLE_ASSIGNMENT((#284901)); +#284901 = SURFACE_STYLE_USAGE(.BOTH.,#284902); +#284902 = SURFACE_SIDE_STYLE('',(#284903)); +#284903 = SURFACE_STYLE_FILL_AREA(#284904); +#284904 = FILL_AREA_STYLE('',(#284905)); +#284905 = FILL_AREA_STYLE_COLOUR('',#279624); +#284906 = STYLED_ITEM('color',(#284907),#90299); +#284907 = PRESENTATION_STYLE_ASSIGNMENT((#284908)); +#284908 = SURFACE_STYLE_USAGE(.BOTH.,#284909); +#284909 = SURFACE_SIDE_STYLE('',(#284910)); +#284910 = SURFACE_STYLE_FILL_AREA(#284911); +#284911 = FILL_AREA_STYLE('',(#284912)); +#284912 = FILL_AREA_STYLE_COLOUR('',#282540); +#284913 = STYLED_ITEM('color',(#284914),#90317); +#284914 = PRESENTATION_STYLE_ASSIGNMENT((#284915)); +#284915 = SURFACE_STYLE_USAGE(.BOTH.,#284916); +#284916 = SURFACE_SIDE_STYLE('',(#284917)); +#284917 = SURFACE_STYLE_FILL_AREA(#284918); +#284918 = FILL_AREA_STYLE('',(#284919)); +#284919 = FILL_AREA_STYLE_COLOUR('',#282540); +#284920 = STYLED_ITEM('color',(#284921),#90329); +#284921 = PRESENTATION_STYLE_ASSIGNMENT((#284922)); +#284922 = SURFACE_STYLE_USAGE(.BOTH.,#284923); +#284923 = SURFACE_SIDE_STYLE('',(#284924)); +#284924 = SURFACE_STYLE_FILL_AREA(#284925); +#284925 = FILL_AREA_STYLE('',(#284926)); +#284926 = FILL_AREA_STYLE_COLOUR('',#282540); +#284927 = STYLED_ITEM('color',(#284928),#90341); +#284928 = PRESENTATION_STYLE_ASSIGNMENT((#284929)); +#284929 = SURFACE_STYLE_USAGE(.BOTH.,#284930); +#284930 = SURFACE_SIDE_STYLE('',(#284931)); +#284931 = SURFACE_STYLE_FILL_AREA(#284932); +#284932 = FILL_AREA_STYLE('',(#284933)); +#284933 = FILL_AREA_STYLE_COLOUR('',#282540); +#284934 = STYLED_ITEM('color',(#284935),#90357); +#284935 = PRESENTATION_STYLE_ASSIGNMENT((#284936)); +#284936 = SURFACE_STYLE_USAGE(.BOTH.,#284937); +#284937 = SURFACE_SIDE_STYLE('',(#284938)); +#284938 = SURFACE_STYLE_FILL_AREA(#284939); +#284939 = FILL_AREA_STYLE('',(#284940)); +#284940 = FILL_AREA_STYLE_COLOUR('',#279624); +#284941 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #284942,#284951,#284960,#284969,#284978,#284987,#284996,#285005, + #285014,#285023,#285032,#285041,#285050,#285059,#285068,#285077, + #285086,#285095,#285104,#285113,#285122,#285131,#285140,#285149, + #285158,#285167,#285176,#285185,#285194,#285203,#285212,#285221, + #285230,#285239,#285248,#285257,#285266,#285275,#285284,#285293, + #285302,#285311,#285320,#285329,#285338,#285347,#285356,#285365, + #285374,#285383,#285392,#285401,#285410,#285419,#285428,#285437, + #285446,#285455,#285464,#285473,#285482,#285491,#285500,#285509, + #285518,#285527,#285536,#285545,#285554,#285563,#285572,#285581, + #285590,#285599,#285608,#285617,#285626,#285635,#285644,#285653, + #285662,#285671,#285680,#285689,#285698,#285707,#285716,#285725, + #285734,#285743,#285752,#285761,#285770,#285779,#285788,#285797, + #285806,#285815,#285824,#285833,#285842,#285851,#285860,#285869, + #285878,#285887,#285896,#285905,#285914,#285923,#285932,#285941, + #285950,#285959,#285968,#285977,#285986,#285995,#286004,#286013, + #286022,#286031,#286040,#286049,#286058,#286067,#286076,#286085, + #286094,#286103,#286112,#286121,#286130,#286139,#286148,#286157, + #286166,#286175,#286184,#286193,#286202,#286211,#286220,#286229, + #286238,#286247,#286256,#286265,#286274,#286283,#286292,#286301), + #20279); +#284942 = STYLED_ITEM('color',(#284943),#15669); +#284943 = PRESENTATION_STYLE_ASSIGNMENT((#284944,#284949)); +#284944 = SURFACE_STYLE_USAGE(.BOTH.,#284945); +#284945 = SURFACE_SIDE_STYLE('',(#284946)); +#284946 = SURFACE_STYLE_FILL_AREA(#284947); +#284947 = FILL_AREA_STYLE('',(#284948)); +#284948 = FILL_AREA_STYLE_COLOUR('',#279624); +#284949 = CURVE_STYLE('',#284950,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#284950 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284951 = STYLED_ITEM('color',(#284952),#15707); +#284952 = PRESENTATION_STYLE_ASSIGNMENT((#284953,#284958)); +#284953 = SURFACE_STYLE_USAGE(.BOTH.,#284954); +#284954 = SURFACE_SIDE_STYLE('',(#284955)); +#284955 = SURFACE_STYLE_FILL_AREA(#284956); +#284956 = FILL_AREA_STYLE('',(#284957)); +#284957 = FILL_AREA_STYLE_COLOUR('',#279624); +#284958 = CURVE_STYLE('',#284959,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#284959 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284960 = STYLED_ITEM('color',(#284961),#15804); +#284961 = PRESENTATION_STYLE_ASSIGNMENT((#284962,#284967)); +#284962 = SURFACE_STYLE_USAGE(.BOTH.,#284963); +#284963 = SURFACE_SIDE_STYLE('',(#284964)); +#284964 = SURFACE_STYLE_FILL_AREA(#284965); +#284965 = FILL_AREA_STYLE('',(#284966)); +#284966 = FILL_AREA_STYLE_COLOUR('',#279624); +#284967 = CURVE_STYLE('',#284968,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#284968 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284969 = STYLED_ITEM('color',(#284970),#15827); +#284970 = PRESENTATION_STYLE_ASSIGNMENT((#284971,#284976)); +#284971 = SURFACE_STYLE_USAGE(.BOTH.,#284972); +#284972 = SURFACE_SIDE_STYLE('',(#284973)); +#284973 = SURFACE_STYLE_FILL_AREA(#284974); +#284974 = FILL_AREA_STYLE('',(#284975)); +#284975 = FILL_AREA_STYLE_COLOUR('',#279624); +#284976 = CURVE_STYLE('',#284977,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#284977 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284978 = STYLED_ITEM('color',(#284979),#15856); +#284979 = PRESENTATION_STYLE_ASSIGNMENT((#284980,#284985)); +#284980 = SURFACE_STYLE_USAGE(.BOTH.,#284981); +#284981 = SURFACE_SIDE_STYLE('',(#284982)); +#284982 = SURFACE_STYLE_FILL_AREA(#284983); +#284983 = FILL_AREA_STYLE('',(#284984)); +#284984 = FILL_AREA_STYLE_COLOUR('',#279624); +#284985 = CURVE_STYLE('',#284986,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#284986 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284987 = STYLED_ITEM('color',(#284988),#15879); +#284988 = PRESENTATION_STYLE_ASSIGNMENT((#284989,#284994)); +#284989 = SURFACE_STYLE_USAGE(.BOTH.,#284990); +#284990 = SURFACE_SIDE_STYLE('',(#284991)); +#284991 = SURFACE_STYLE_FILL_AREA(#284992); +#284992 = FILL_AREA_STYLE('',(#284993)); +#284993 = FILL_AREA_STYLE_COLOUR('',#279624); +#284994 = CURVE_STYLE('',#284995,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#284995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284996 = STYLED_ITEM('color',(#284997),#15966); +#284997 = PRESENTATION_STYLE_ASSIGNMENT((#284998,#285003)); +#284998 = SURFACE_STYLE_USAGE(.BOTH.,#284999); +#284999 = SURFACE_SIDE_STYLE('',(#285000)); +#285000 = SURFACE_STYLE_FILL_AREA(#285001); +#285001 = FILL_AREA_STYLE('',(#285002)); +#285002 = FILL_AREA_STYLE_COLOUR('',#279624); +#285003 = CURVE_STYLE('',#285004,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285004 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285005 = STYLED_ITEM('color',(#285006),#16053); +#285006 = PRESENTATION_STYLE_ASSIGNMENT((#285007,#285012)); +#285007 = SURFACE_STYLE_USAGE(.BOTH.,#285008); +#285008 = SURFACE_SIDE_STYLE('',(#285009)); +#285009 = SURFACE_STYLE_FILL_AREA(#285010); +#285010 = FILL_AREA_STYLE('',(#285011)); +#285011 = FILL_AREA_STYLE_COLOUR('',#279624); +#285012 = CURVE_STYLE('',#285013,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285013 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285014 = STYLED_ITEM('color',(#285015),#16076); +#285015 = PRESENTATION_STYLE_ASSIGNMENT((#285016,#285021)); +#285016 = SURFACE_STYLE_USAGE(.BOTH.,#285017); +#285017 = SURFACE_SIDE_STYLE('',(#285018)); +#285018 = SURFACE_STYLE_FILL_AREA(#285019); +#285019 = FILL_AREA_STYLE('',(#285020)); +#285020 = FILL_AREA_STYLE_COLOUR('',#279624); +#285021 = CURVE_STYLE('',#285022,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285023 = STYLED_ITEM('color',(#285024),#16099); +#285024 = PRESENTATION_STYLE_ASSIGNMENT((#285025,#285030)); +#285025 = SURFACE_STYLE_USAGE(.BOTH.,#285026); +#285026 = SURFACE_SIDE_STYLE('',(#285027)); +#285027 = SURFACE_STYLE_FILL_AREA(#285028); +#285028 = FILL_AREA_STYLE('',(#285029)); +#285029 = FILL_AREA_STYLE_COLOUR('',#279624); +#285030 = CURVE_STYLE('',#285031,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285031 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285032 = STYLED_ITEM('color',(#285033),#16116); +#285033 = PRESENTATION_STYLE_ASSIGNMENT((#285034,#285039)); +#285034 = SURFACE_STYLE_USAGE(.BOTH.,#285035); +#285035 = SURFACE_SIDE_STYLE('',(#285036)); +#285036 = SURFACE_STYLE_FILL_AREA(#285037); +#285037 = FILL_AREA_STYLE('',(#285038)); +#285038 = FILL_AREA_STYLE_COLOUR('',#282540); +#285039 = CURVE_STYLE('',#285040,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285040 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285041 = STYLED_ITEM('color',(#285042),#16147); +#285042 = PRESENTATION_STYLE_ASSIGNMENT((#285043,#285048)); +#285043 = SURFACE_STYLE_USAGE(.BOTH.,#285044); +#285044 = SURFACE_SIDE_STYLE('',(#285045)); +#285045 = SURFACE_STYLE_FILL_AREA(#285046); +#285046 = FILL_AREA_STYLE('',(#285047)); +#285047 = FILL_AREA_STYLE_COLOUR('',#282540); +#285048 = CURVE_STYLE('',#285049,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285049 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285050 = STYLED_ITEM('color',(#285051),#16171); +#285051 = PRESENTATION_STYLE_ASSIGNMENT((#285052,#285057)); +#285052 = SURFACE_STYLE_USAGE(.BOTH.,#285053); +#285053 = SURFACE_SIDE_STYLE('',(#285054)); +#285054 = SURFACE_STYLE_FILL_AREA(#285055); +#285055 = FILL_AREA_STYLE('',(#285056)); +#285056 = FILL_AREA_STYLE_COLOUR('',#282540); +#285057 = CURVE_STYLE('',#285058,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285058 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285059 = STYLED_ITEM('color',(#285060),#16195); +#285060 = PRESENTATION_STYLE_ASSIGNMENT((#285061,#285066)); +#285061 = SURFACE_STYLE_USAGE(.BOTH.,#285062); +#285062 = SURFACE_SIDE_STYLE('',(#285063)); +#285063 = SURFACE_STYLE_FILL_AREA(#285064); +#285064 = FILL_AREA_STYLE('',(#285065)); +#285065 = FILL_AREA_STYLE_COLOUR('',#282540); +#285066 = CURVE_STYLE('',#285067,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285067 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285068 = STYLED_ITEM('color',(#285069),#16212); +#285069 = PRESENTATION_STYLE_ASSIGNMENT((#285070,#285075)); +#285070 = SURFACE_STYLE_USAGE(.BOTH.,#285071); +#285071 = SURFACE_SIDE_STYLE('',(#285072)); +#285072 = SURFACE_STYLE_FILL_AREA(#285073); +#285073 = FILL_AREA_STYLE('',(#285074)); +#285074 = FILL_AREA_STYLE_COLOUR('',#279624); +#285075 = CURVE_STYLE('',#285076,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285076 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285077 = STYLED_ITEM('color',(#285078),#16235); +#285078 = PRESENTATION_STYLE_ASSIGNMENT((#285079,#285084)); +#285079 = SURFACE_STYLE_USAGE(.BOTH.,#285080); +#285080 = SURFACE_SIDE_STYLE('',(#285081)); +#285081 = SURFACE_STYLE_FILL_AREA(#285082); +#285082 = FILL_AREA_STYLE('',(#285083)); +#285083 = FILL_AREA_STYLE_COLOUR('',#279624); +#285084 = CURVE_STYLE('',#285085,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285085 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285086 = STYLED_ITEM('color',(#285087),#16323); +#285087 = PRESENTATION_STYLE_ASSIGNMENT((#285088,#285093)); +#285088 = SURFACE_STYLE_USAGE(.BOTH.,#285089); +#285089 = SURFACE_SIDE_STYLE('',(#285090)); +#285090 = SURFACE_STYLE_FILL_AREA(#285091); +#285091 = FILL_AREA_STYLE('',(#285092)); +#285092 = FILL_AREA_STYLE_COLOUR('',#279624); +#285093 = CURVE_STYLE('',#285094,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285094 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285095 = STYLED_ITEM('color',(#285096),#16339); +#285096 = PRESENTATION_STYLE_ASSIGNMENT((#285097,#285102)); +#285097 = SURFACE_STYLE_USAGE(.BOTH.,#285098); +#285098 = SURFACE_SIDE_STYLE('',(#285099)); +#285099 = SURFACE_STYLE_FILL_AREA(#285100); +#285100 = FILL_AREA_STYLE('',(#285101)); +#285101 = FILL_AREA_STYLE_COLOUR('',#279624); +#285102 = CURVE_STYLE('',#285103,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285103 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285104 = STYLED_ITEM('color',(#285105),#16369); +#285105 = PRESENTATION_STYLE_ASSIGNMENT((#285106,#285111)); +#285106 = SURFACE_STYLE_USAGE(.BOTH.,#285107); +#285107 = SURFACE_SIDE_STYLE('',(#285108)); +#285108 = SURFACE_STYLE_FILL_AREA(#285109); +#285109 = FILL_AREA_STYLE('',(#285110)); +#285110 = FILL_AREA_STYLE_COLOUR('',#282540); +#285111 = CURVE_STYLE('',#285112,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285112 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285113 = STYLED_ITEM('color',(#285114),#16400); +#285114 = PRESENTATION_STYLE_ASSIGNMENT((#285115,#285120)); +#285115 = SURFACE_STYLE_USAGE(.BOTH.,#285116); +#285116 = SURFACE_SIDE_STYLE('',(#285117)); +#285117 = SURFACE_STYLE_FILL_AREA(#285118); +#285118 = FILL_AREA_STYLE('',(#285119)); +#285119 = FILL_AREA_STYLE_COLOUR('',#279624); +#285120 = CURVE_STYLE('',#285121,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285121 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285122 = STYLED_ITEM('color',(#285123),#16431); +#285123 = PRESENTATION_STYLE_ASSIGNMENT((#285124,#285129)); +#285124 = SURFACE_STYLE_USAGE(.BOTH.,#285125); +#285125 = SURFACE_SIDE_STYLE('',(#285126)); +#285126 = SURFACE_STYLE_FILL_AREA(#285127); +#285127 = FILL_AREA_STYLE('',(#285128)); +#285128 = FILL_AREA_STYLE_COLOUR('',#282540); +#285129 = CURVE_STYLE('',#285130,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285130 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285131 = STYLED_ITEM('color',(#285132),#16462); +#285132 = PRESENTATION_STYLE_ASSIGNMENT((#285133,#285138)); +#285133 = SURFACE_STYLE_USAGE(.BOTH.,#285134); +#285134 = SURFACE_SIDE_STYLE('',(#285135)); +#285135 = SURFACE_STYLE_FILL_AREA(#285136); +#285136 = FILL_AREA_STYLE('',(#285137)); +#285137 = FILL_AREA_STYLE_COLOUR('',#279624); +#285138 = CURVE_STYLE('',#285139,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285139 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285140 = STYLED_ITEM('color',(#285141),#16493); +#285141 = PRESENTATION_STYLE_ASSIGNMENT((#285142,#285147)); +#285142 = SURFACE_STYLE_USAGE(.BOTH.,#285143); +#285143 = SURFACE_SIDE_STYLE('',(#285144)); +#285144 = SURFACE_STYLE_FILL_AREA(#285145); +#285145 = FILL_AREA_STYLE('',(#285146)); +#285146 = FILL_AREA_STYLE_COLOUR('',#282540); +#285147 = CURVE_STYLE('',#285148,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285148 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285149 = STYLED_ITEM('color',(#285150),#16524); +#285150 = PRESENTATION_STYLE_ASSIGNMENT((#285151,#285156)); +#285151 = SURFACE_STYLE_USAGE(.BOTH.,#285152); +#285152 = SURFACE_SIDE_STYLE('',(#285153)); +#285153 = SURFACE_STYLE_FILL_AREA(#285154); +#285154 = FILL_AREA_STYLE('',(#285155)); +#285155 = FILL_AREA_STYLE_COLOUR('',#279624); +#285156 = CURVE_STYLE('',#285157,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285157 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285158 = STYLED_ITEM('color',(#285159),#16555); +#285159 = PRESENTATION_STYLE_ASSIGNMENT((#285160,#285165)); +#285160 = SURFACE_STYLE_USAGE(.BOTH.,#285161); +#285161 = SURFACE_SIDE_STYLE('',(#285162)); +#285162 = SURFACE_STYLE_FILL_AREA(#285163); +#285163 = FILL_AREA_STYLE('',(#285164)); +#285164 = FILL_AREA_STYLE_COLOUR('',#282540); +#285165 = CURVE_STYLE('',#285166,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285166 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285167 = STYLED_ITEM('color',(#285168),#16586); +#285168 = PRESENTATION_STYLE_ASSIGNMENT((#285169,#285174)); +#285169 = SURFACE_STYLE_USAGE(.BOTH.,#285170); +#285170 = SURFACE_SIDE_STYLE('',(#285171)); +#285171 = SURFACE_STYLE_FILL_AREA(#285172); +#285172 = FILL_AREA_STYLE('',(#285173)); +#285173 = FILL_AREA_STYLE_COLOUR('',#279624); +#285174 = CURVE_STYLE('',#285175,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285175 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285176 = STYLED_ITEM('color',(#285177),#16603); +#285177 = PRESENTATION_STYLE_ASSIGNMENT((#285178,#285183)); +#285178 = SURFACE_STYLE_USAGE(.BOTH.,#285179); +#285179 = SURFACE_SIDE_STYLE('',(#285180)); +#285180 = SURFACE_STYLE_FILL_AREA(#285181); +#285181 = FILL_AREA_STYLE('',(#285182)); +#285182 = FILL_AREA_STYLE_COLOUR('',#279624); +#285183 = CURVE_STYLE('',#285184,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285184 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285185 = STYLED_ITEM('color',(#285186),#16620); +#285186 = PRESENTATION_STYLE_ASSIGNMENT((#285187,#285192)); +#285187 = SURFACE_STYLE_USAGE(.BOTH.,#285188); +#285188 = SURFACE_SIDE_STYLE('',(#285189)); +#285189 = SURFACE_STYLE_FILL_AREA(#285190); +#285190 = FILL_AREA_STYLE('',(#285191)); +#285191 = FILL_AREA_STYLE_COLOUR('',#282540); +#285192 = CURVE_STYLE('',#285193,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285193 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285194 = STYLED_ITEM('color',(#285195),#16651); +#285195 = PRESENTATION_STYLE_ASSIGNMENT((#285196,#285201)); +#285196 = SURFACE_STYLE_USAGE(.BOTH.,#285197); +#285197 = SURFACE_SIDE_STYLE('',(#285198)); +#285198 = SURFACE_STYLE_FILL_AREA(#285199); +#285199 = FILL_AREA_STYLE('',(#285200)); +#285200 = FILL_AREA_STYLE_COLOUR('',#279624); +#285201 = CURVE_STYLE('',#285202,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285202 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285203 = STYLED_ITEM('color',(#285204),#16682); +#285204 = PRESENTATION_STYLE_ASSIGNMENT((#285205,#285210)); +#285205 = SURFACE_STYLE_USAGE(.BOTH.,#285206); +#285206 = SURFACE_SIDE_STYLE('',(#285207)); +#285207 = SURFACE_STYLE_FILL_AREA(#285208); +#285208 = FILL_AREA_STYLE('',(#285209)); +#285209 = FILL_AREA_STYLE_COLOUR('',#282540); +#285210 = CURVE_STYLE('',#285211,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285211 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285212 = STYLED_ITEM('color',(#285213),#16713); +#285213 = PRESENTATION_STYLE_ASSIGNMENT((#285214,#285219)); +#285214 = SURFACE_STYLE_USAGE(.BOTH.,#285215); +#285215 = SURFACE_SIDE_STYLE('',(#285216)); +#285216 = SURFACE_STYLE_FILL_AREA(#285217); +#285217 = FILL_AREA_STYLE('',(#285218)); +#285218 = FILL_AREA_STYLE_COLOUR('',#279624); +#285219 = CURVE_STYLE('',#285220,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285220 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285221 = STYLED_ITEM('color',(#285222),#16744); +#285222 = PRESENTATION_STYLE_ASSIGNMENT((#285223,#285228)); +#285223 = SURFACE_STYLE_USAGE(.BOTH.,#285224); +#285224 = SURFACE_SIDE_STYLE('',(#285225)); +#285225 = SURFACE_STYLE_FILL_AREA(#285226); +#285226 = FILL_AREA_STYLE('',(#285227)); +#285227 = FILL_AREA_STYLE_COLOUR('',#282540); +#285228 = CURVE_STYLE('',#285229,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285229 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285230 = STYLED_ITEM('color',(#285231),#16775); +#285231 = PRESENTATION_STYLE_ASSIGNMENT((#285232,#285237)); +#285232 = SURFACE_STYLE_USAGE(.BOTH.,#285233); +#285233 = SURFACE_SIDE_STYLE('',(#285234)); +#285234 = SURFACE_STYLE_FILL_AREA(#285235); +#285235 = FILL_AREA_STYLE('',(#285236)); +#285236 = FILL_AREA_STYLE_COLOUR('',#279624); +#285237 = CURVE_STYLE('',#285238,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285238 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285239 = STYLED_ITEM('color',(#285240),#16806); +#285240 = PRESENTATION_STYLE_ASSIGNMENT((#285241,#285246)); +#285241 = SURFACE_STYLE_USAGE(.BOTH.,#285242); +#285242 = SURFACE_SIDE_STYLE('',(#285243)); +#285243 = SURFACE_STYLE_FILL_AREA(#285244); +#285244 = FILL_AREA_STYLE('',(#285245)); +#285245 = FILL_AREA_STYLE_COLOUR('',#282540); +#285246 = CURVE_STYLE('',#285247,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285247 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285248 = STYLED_ITEM('color',(#285249),#16837); +#285249 = PRESENTATION_STYLE_ASSIGNMENT((#285250,#285255)); +#285250 = SURFACE_STYLE_USAGE(.BOTH.,#285251); +#285251 = SURFACE_SIDE_STYLE('',(#285252)); +#285252 = SURFACE_STYLE_FILL_AREA(#285253); +#285253 = FILL_AREA_STYLE('',(#285254)); +#285254 = FILL_AREA_STYLE_COLOUR('',#279624); +#285255 = CURVE_STYLE('',#285256,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285256 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285257 = STYLED_ITEM('color',(#285258),#16867); +#285258 = PRESENTATION_STYLE_ASSIGNMENT((#285259,#285264)); +#285259 = SURFACE_STYLE_USAGE(.BOTH.,#285260); +#285260 = SURFACE_SIDE_STYLE('',(#285261)); +#285261 = SURFACE_STYLE_FILL_AREA(#285262); +#285262 = FILL_AREA_STYLE('',(#285263)); +#285263 = FILL_AREA_STYLE_COLOUR('',#279624); +#285264 = CURVE_STYLE('',#285265,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285265 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285266 = STYLED_ITEM('color',(#285267),#16890); +#285267 = PRESENTATION_STYLE_ASSIGNMENT((#285268,#285273)); +#285268 = SURFACE_STYLE_USAGE(.BOTH.,#285269); +#285269 = SURFACE_SIDE_STYLE('',(#285270)); +#285270 = SURFACE_STYLE_FILL_AREA(#285271); +#285271 = FILL_AREA_STYLE('',(#285272)); +#285272 = FILL_AREA_STYLE_COLOUR('',#279624); +#285273 = CURVE_STYLE('',#285274,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285274 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285275 = STYLED_ITEM('color',(#285276),#16913); +#285276 = PRESENTATION_STYLE_ASSIGNMENT((#285277,#285282)); +#285277 = SURFACE_STYLE_USAGE(.BOTH.,#285278); +#285278 = SURFACE_SIDE_STYLE('',(#285279)); +#285279 = SURFACE_STYLE_FILL_AREA(#285280); +#285280 = FILL_AREA_STYLE('',(#285281)); +#285281 = FILL_AREA_STYLE_COLOUR('',#279624); +#285282 = CURVE_STYLE('',#285283,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285283 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285284 = STYLED_ITEM('color',(#285285),#16930); +#285285 = PRESENTATION_STYLE_ASSIGNMENT((#285286,#285291)); +#285286 = SURFACE_STYLE_USAGE(.BOTH.,#285287); +#285287 = SURFACE_SIDE_STYLE('',(#285288)); +#285288 = SURFACE_STYLE_FILL_AREA(#285289); +#285289 = FILL_AREA_STYLE('',(#285290)); +#285290 = FILL_AREA_STYLE_COLOUR('',#282540); +#285291 = CURVE_STYLE('',#285292,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285292 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285293 = STYLED_ITEM('color',(#285294),#16942); +#285294 = PRESENTATION_STYLE_ASSIGNMENT((#285295,#285300)); +#285295 = SURFACE_STYLE_USAGE(.BOTH.,#285296); +#285296 = SURFACE_SIDE_STYLE('',(#285297)); +#285297 = SURFACE_STYLE_FILL_AREA(#285298); +#285298 = FILL_AREA_STYLE('',(#285299)); +#285299 = FILL_AREA_STYLE_COLOUR('',#282540); +#285300 = CURVE_STYLE('',#285301,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285301 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285302 = STYLED_ITEM('color',(#285303),#16987); +#285303 = PRESENTATION_STYLE_ASSIGNMENT((#285304,#285309)); +#285304 = SURFACE_STYLE_USAGE(.BOTH.,#285305); +#285305 = SURFACE_SIDE_STYLE('',(#285306)); +#285306 = SURFACE_STYLE_FILL_AREA(#285307); +#285307 = FILL_AREA_STYLE('',(#285308)); +#285308 = FILL_AREA_STYLE_COLOUR('',#279624); +#285309 = CURVE_STYLE('',#285310,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285310 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285311 = STYLED_ITEM('color',(#285312),#17073); +#285312 = PRESENTATION_STYLE_ASSIGNMENT((#285313,#285318)); +#285313 = SURFACE_STYLE_USAGE(.BOTH.,#285314); +#285314 = SURFACE_SIDE_STYLE('',(#285315)); +#285315 = SURFACE_STYLE_FILL_AREA(#285316); +#285316 = FILL_AREA_STYLE('',(#285317)); +#285317 = FILL_AREA_STYLE_COLOUR('',#279624); +#285318 = CURVE_STYLE('',#285319,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285319 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285320 = STYLED_ITEM('color',(#285321),#17096); +#285321 = PRESENTATION_STYLE_ASSIGNMENT((#285322,#285327)); +#285322 = SURFACE_STYLE_USAGE(.BOTH.,#285323); +#285323 = SURFACE_SIDE_STYLE('',(#285324)); +#285324 = SURFACE_STYLE_FILL_AREA(#285325); +#285325 = FILL_AREA_STYLE('',(#285326)); +#285326 = FILL_AREA_STYLE_COLOUR('',#279624); +#285327 = CURVE_STYLE('',#285328,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285328 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285329 = STYLED_ITEM('color',(#285330),#17119); +#285330 = PRESENTATION_STYLE_ASSIGNMENT((#285331,#285336)); +#285331 = SURFACE_STYLE_USAGE(.BOTH.,#285332); +#285332 = SURFACE_SIDE_STYLE('',(#285333)); +#285333 = SURFACE_STYLE_FILL_AREA(#285334); +#285334 = FILL_AREA_STYLE('',(#285335)); +#285335 = FILL_AREA_STYLE_COLOUR('',#279624); +#285336 = CURVE_STYLE('',#285337,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285337 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285338 = STYLED_ITEM('color',(#285339),#17142); +#285339 = PRESENTATION_STYLE_ASSIGNMENT((#285340,#285345)); +#285340 = SURFACE_STYLE_USAGE(.BOTH.,#285341); +#285341 = SURFACE_SIDE_STYLE('',(#285342)); +#285342 = SURFACE_STYLE_FILL_AREA(#285343); +#285343 = FILL_AREA_STYLE('',(#285344)); +#285344 = FILL_AREA_STYLE_COLOUR('',#279624); +#285345 = CURVE_STYLE('',#285346,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285346 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285347 = STYLED_ITEM('color',(#285348),#17229); +#285348 = PRESENTATION_STYLE_ASSIGNMENT((#285349,#285354)); +#285349 = SURFACE_STYLE_USAGE(.BOTH.,#285350); +#285350 = SURFACE_SIDE_STYLE('',(#285351)); +#285351 = SURFACE_STYLE_FILL_AREA(#285352); +#285352 = FILL_AREA_STYLE('',(#285353)); +#285353 = FILL_AREA_STYLE_COLOUR('',#282540); +#285354 = CURVE_STYLE('',#285355,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285355 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285356 = STYLED_ITEM('color',(#285357),#17267); +#285357 = PRESENTATION_STYLE_ASSIGNMENT((#285358,#285363)); +#285358 = SURFACE_STYLE_USAGE(.BOTH.,#285359); +#285359 = SURFACE_SIDE_STYLE('',(#285360)); +#285360 = SURFACE_STYLE_FILL_AREA(#285361); +#285361 = FILL_AREA_STYLE('',(#285362)); +#285362 = FILL_AREA_STYLE_COLOUR('',#279624); +#285363 = CURVE_STYLE('',#285364,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285364 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285365 = STYLED_ITEM('color',(#285366),#17316); +#285366 = PRESENTATION_STYLE_ASSIGNMENT((#285367,#285372)); +#285367 = SURFACE_STYLE_USAGE(.BOTH.,#285368); +#285368 = SURFACE_SIDE_STYLE('',(#285369)); +#285369 = SURFACE_STYLE_FILL_AREA(#285370); +#285370 = FILL_AREA_STYLE('',(#285371)); +#285371 = FILL_AREA_STYLE_COLOUR('',#282540); +#285372 = CURVE_STYLE('',#285373,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285373 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285374 = STYLED_ITEM('color',(#285375),#17408); +#285375 = PRESENTATION_STYLE_ASSIGNMENT((#285376,#285381)); +#285376 = SURFACE_STYLE_USAGE(.BOTH.,#285377); +#285377 = SURFACE_SIDE_STYLE('',(#285378)); +#285378 = SURFACE_STYLE_FILL_AREA(#285379); +#285379 = FILL_AREA_STYLE('',(#285380)); +#285380 = FILL_AREA_STYLE_COLOUR('',#282540); +#285381 = CURVE_STYLE('',#285382,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285382 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285383 = STYLED_ITEM('color',(#285384),#17433); +#285384 = PRESENTATION_STYLE_ASSIGNMENT((#285385,#285390)); +#285385 = SURFACE_STYLE_USAGE(.BOTH.,#285386); +#285386 = SURFACE_SIDE_STYLE('',(#285387)); +#285387 = SURFACE_STYLE_FILL_AREA(#285388); +#285388 = FILL_AREA_STYLE('',(#285389)); +#285389 = FILL_AREA_STYLE_COLOUR('',#282540); +#285390 = CURVE_STYLE('',#285391,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285391 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285392 = STYLED_ITEM('color',(#285393),#17517); +#285393 = PRESENTATION_STYLE_ASSIGNMENT((#285394,#285399)); +#285394 = SURFACE_STYLE_USAGE(.BOTH.,#285395); +#285395 = SURFACE_SIDE_STYLE('',(#285396)); +#285396 = SURFACE_STYLE_FILL_AREA(#285397); +#285397 = FILL_AREA_STYLE('',(#285398)); +#285398 = FILL_AREA_STYLE_COLOUR('',#279624); +#285399 = CURVE_STYLE('',#285400,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285401 = STYLED_ITEM('color',(#285402),#17539); +#285402 = PRESENTATION_STYLE_ASSIGNMENT((#285403,#285408)); +#285403 = SURFACE_STYLE_USAGE(.BOTH.,#285404); +#285404 = SURFACE_SIDE_STYLE('',(#285405)); +#285405 = SURFACE_STYLE_FILL_AREA(#285406); +#285406 = FILL_AREA_STYLE('',(#285407)); +#285407 = FILL_AREA_STYLE_COLOUR('',#282540); +#285408 = CURVE_STYLE('',#285409,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285409 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285410 = STYLED_ITEM('color',(#285411),#17631); +#285411 = PRESENTATION_STYLE_ASSIGNMENT((#285412,#285417)); +#285412 = SURFACE_STYLE_USAGE(.BOTH.,#285413); +#285413 = SURFACE_SIDE_STYLE('',(#285414)); +#285414 = SURFACE_STYLE_FILL_AREA(#285415); +#285415 = FILL_AREA_STYLE('',(#285416)); +#285416 = FILL_AREA_STYLE_COLOUR('',#282540); +#285417 = CURVE_STYLE('',#285418,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285418 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285419 = STYLED_ITEM('color',(#285420),#17656); +#285420 = PRESENTATION_STYLE_ASSIGNMENT((#285421,#285426)); +#285421 = SURFACE_STYLE_USAGE(.BOTH.,#285422); +#285422 = SURFACE_SIDE_STYLE('',(#285423)); +#285423 = SURFACE_STYLE_FILL_AREA(#285424); +#285424 = FILL_AREA_STYLE('',(#285425)); +#285425 = FILL_AREA_STYLE_COLOUR('',#282540); +#285426 = CURVE_STYLE('',#285427,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285427 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285428 = STYLED_ITEM('color',(#285429),#17740); +#285429 = PRESENTATION_STYLE_ASSIGNMENT((#285430,#285435)); +#285430 = SURFACE_STYLE_USAGE(.BOTH.,#285431); +#285431 = SURFACE_SIDE_STYLE('',(#285432)); +#285432 = SURFACE_STYLE_FILL_AREA(#285433); +#285433 = FILL_AREA_STYLE('',(#285434)); +#285434 = FILL_AREA_STYLE_COLOUR('',#279624); +#285435 = CURVE_STYLE('',#285436,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285436 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285437 = STYLED_ITEM('color',(#285438),#17762); +#285438 = PRESENTATION_STYLE_ASSIGNMENT((#285439,#285444)); +#285439 = SURFACE_STYLE_USAGE(.BOTH.,#285440); +#285440 = SURFACE_SIDE_STYLE('',(#285441)); +#285441 = SURFACE_STYLE_FILL_AREA(#285442); +#285442 = FILL_AREA_STYLE('',(#285443)); +#285443 = FILL_AREA_STYLE_COLOUR('',#282540); +#285444 = CURVE_STYLE('',#285445,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285445 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285446 = STYLED_ITEM('color',(#285447),#17854); +#285447 = PRESENTATION_STYLE_ASSIGNMENT((#285448,#285453)); +#285448 = SURFACE_STYLE_USAGE(.BOTH.,#285449); +#285449 = SURFACE_SIDE_STYLE('',(#285450)); +#285450 = SURFACE_STYLE_FILL_AREA(#285451); +#285451 = FILL_AREA_STYLE('',(#285452)); +#285452 = FILL_AREA_STYLE_COLOUR('',#282540); +#285453 = CURVE_STYLE('',#285454,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285454 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285455 = STYLED_ITEM('color',(#285456),#17879); +#285456 = PRESENTATION_STYLE_ASSIGNMENT((#285457,#285462)); +#285457 = SURFACE_STYLE_USAGE(.BOTH.,#285458); +#285458 = SURFACE_SIDE_STYLE('',(#285459)); +#285459 = SURFACE_STYLE_FILL_AREA(#285460); +#285460 = FILL_AREA_STYLE('',(#285461)); +#285461 = FILL_AREA_STYLE_COLOUR('',#282540); +#285462 = CURVE_STYLE('',#285463,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285463 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285464 = STYLED_ITEM('color',(#285465),#17963); +#285465 = PRESENTATION_STYLE_ASSIGNMENT((#285466,#285471)); +#285466 = SURFACE_STYLE_USAGE(.BOTH.,#285467); +#285467 = SURFACE_SIDE_STYLE('',(#285468)); +#285468 = SURFACE_STYLE_FILL_AREA(#285469); +#285469 = FILL_AREA_STYLE('',(#285470)); +#285470 = FILL_AREA_STYLE_COLOUR('',#279624); +#285471 = CURVE_STYLE('',#285472,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285472 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285473 = STYLED_ITEM('color',(#285474),#17980); +#285474 = PRESENTATION_STYLE_ASSIGNMENT((#285475,#285480)); +#285475 = SURFACE_STYLE_USAGE(.BOTH.,#285476); +#285476 = SURFACE_SIDE_STYLE('',(#285477)); +#285477 = SURFACE_STYLE_FILL_AREA(#285478); +#285478 = FILL_AREA_STYLE('',(#285479)); +#285479 = FILL_AREA_STYLE_COLOUR('',#282540); +#285480 = CURVE_STYLE('',#285481,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285481 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285482 = STYLED_ITEM('color',(#285483),#18065); +#285483 = PRESENTATION_STYLE_ASSIGNMENT((#285484,#285489)); +#285484 = SURFACE_STYLE_USAGE(.BOTH.,#285485); +#285485 = SURFACE_SIDE_STYLE('',(#285486)); +#285486 = SURFACE_STYLE_FILL_AREA(#285487); +#285487 = FILL_AREA_STYLE('',(#285488)); +#285488 = FILL_AREA_STYLE_COLOUR('',#282540); +#285489 = CURVE_STYLE('',#285490,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285490 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285491 = STYLED_ITEM('color',(#285492),#18090); +#285492 = PRESENTATION_STYLE_ASSIGNMENT((#285493,#285498)); +#285493 = SURFACE_STYLE_USAGE(.BOTH.,#285494); +#285494 = SURFACE_SIDE_STYLE('',(#285495)); +#285495 = SURFACE_STYLE_FILL_AREA(#285496); +#285496 = FILL_AREA_STYLE('',(#285497)); +#285497 = FILL_AREA_STYLE_COLOUR('',#282540); +#285498 = CURVE_STYLE('',#285499,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285499 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285500 = STYLED_ITEM('color',(#285501),#18167); +#285501 = PRESENTATION_STYLE_ASSIGNMENT((#285502,#285507)); +#285502 = SURFACE_STYLE_USAGE(.BOTH.,#285503); +#285503 = SURFACE_SIDE_STYLE('',(#285504)); +#285504 = SURFACE_STYLE_FILL_AREA(#285505); +#285505 = FILL_AREA_STYLE('',(#285506)); +#285506 = FILL_AREA_STYLE_COLOUR('',#282540); +#285507 = CURVE_STYLE('',#285508,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285508 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285509 = STYLED_ITEM('color',(#285510),#18252); +#285510 = PRESENTATION_STYLE_ASSIGNMENT((#285511,#285516)); +#285511 = SURFACE_STYLE_USAGE(.BOTH.,#285512); +#285512 = SURFACE_SIDE_STYLE('',(#285513)); +#285513 = SURFACE_STYLE_FILL_AREA(#285514); +#285514 = FILL_AREA_STYLE('',(#285515)); +#285515 = FILL_AREA_STYLE_COLOUR('',#282540); +#285516 = CURVE_STYLE('',#285517,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285517 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285518 = STYLED_ITEM('color',(#285519),#18277); +#285519 = PRESENTATION_STYLE_ASSIGNMENT((#285520,#285525)); +#285520 = SURFACE_STYLE_USAGE(.BOTH.,#285521); +#285521 = SURFACE_SIDE_STYLE('',(#285522)); +#285522 = SURFACE_STYLE_FILL_AREA(#285523); +#285523 = FILL_AREA_STYLE('',(#285524)); +#285524 = FILL_AREA_STYLE_COLOUR('',#282540); +#285525 = CURVE_STYLE('',#285526,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285526 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285527 = STYLED_ITEM('color',(#285528),#18354); +#285528 = PRESENTATION_STYLE_ASSIGNMENT((#285529,#285534)); +#285529 = SURFACE_STYLE_USAGE(.BOTH.,#285530); +#285530 = SURFACE_SIDE_STYLE('',(#285531)); +#285531 = SURFACE_STYLE_FILL_AREA(#285532); +#285532 = FILL_AREA_STYLE('',(#285533)); +#285533 = FILL_AREA_STYLE_COLOUR('',#279624); +#285534 = CURVE_STYLE('',#285535,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285535 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285536 = STYLED_ITEM('color',(#285537),#18371); +#285537 = PRESENTATION_STYLE_ASSIGNMENT((#285538,#285543)); +#285538 = SURFACE_STYLE_USAGE(.BOTH.,#285539); +#285539 = SURFACE_SIDE_STYLE('',(#285540)); +#285540 = SURFACE_STYLE_FILL_AREA(#285541); +#285541 = FILL_AREA_STYLE('',(#285542)); +#285542 = FILL_AREA_STYLE_COLOUR('',#282540); +#285543 = CURVE_STYLE('',#285544,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285544 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285545 = STYLED_ITEM('color',(#285546),#18463); +#285546 = PRESENTATION_STYLE_ASSIGNMENT((#285547,#285552)); +#285547 = SURFACE_STYLE_USAGE(.BOTH.,#285548); +#285548 = SURFACE_SIDE_STYLE('',(#285549)); +#285549 = SURFACE_STYLE_FILL_AREA(#285550); +#285550 = FILL_AREA_STYLE('',(#285551)); +#285551 = FILL_AREA_STYLE_COLOUR('',#282540); +#285552 = CURVE_STYLE('',#285553,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285553 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285554 = STYLED_ITEM('color',(#285555),#18488); +#285555 = PRESENTATION_STYLE_ASSIGNMENT((#285556,#285561)); +#285556 = SURFACE_STYLE_USAGE(.BOTH.,#285557); +#285557 = SURFACE_SIDE_STYLE('',(#285558)); +#285558 = SURFACE_STYLE_FILL_AREA(#285559); +#285559 = FILL_AREA_STYLE('',(#285560)); +#285560 = FILL_AREA_STYLE_COLOUR('',#282540); +#285561 = CURVE_STYLE('',#285562,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285562 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285563 = STYLED_ITEM('color',(#285564),#18572); +#285564 = PRESENTATION_STYLE_ASSIGNMENT((#285565,#285570)); +#285565 = SURFACE_STYLE_USAGE(.BOTH.,#285566); +#285566 = SURFACE_SIDE_STYLE('',(#285567)); +#285567 = SURFACE_STYLE_FILL_AREA(#285568); +#285568 = FILL_AREA_STYLE('',(#285569)); +#285569 = FILL_AREA_STYLE_COLOUR('',#279624); +#285570 = CURVE_STYLE('',#285571,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285571 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285572 = STYLED_ITEM('color',(#285573),#18594); +#285573 = PRESENTATION_STYLE_ASSIGNMENT((#285574,#285579)); +#285574 = SURFACE_STYLE_USAGE(.BOTH.,#285575); +#285575 = SURFACE_SIDE_STYLE('',(#285576)); +#285576 = SURFACE_STYLE_FILL_AREA(#285577); +#285577 = FILL_AREA_STYLE('',(#285578)); +#285578 = FILL_AREA_STYLE_COLOUR('',#282540); +#285579 = CURVE_STYLE('',#285580,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285581 = STYLED_ITEM('color',(#285582),#18686); +#285582 = PRESENTATION_STYLE_ASSIGNMENT((#285583,#285588)); +#285583 = SURFACE_STYLE_USAGE(.BOTH.,#285584); +#285584 = SURFACE_SIDE_STYLE('',(#285585)); +#285585 = SURFACE_STYLE_FILL_AREA(#285586); +#285586 = FILL_AREA_STYLE('',(#285587)); +#285587 = FILL_AREA_STYLE_COLOUR('',#282540); +#285588 = CURVE_STYLE('',#285589,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285590 = STYLED_ITEM('color',(#285591),#18711); +#285591 = PRESENTATION_STYLE_ASSIGNMENT((#285592,#285597)); +#285592 = SURFACE_STYLE_USAGE(.BOTH.,#285593); +#285593 = SURFACE_SIDE_STYLE('',(#285594)); +#285594 = SURFACE_STYLE_FILL_AREA(#285595); +#285595 = FILL_AREA_STYLE('',(#285596)); +#285596 = FILL_AREA_STYLE_COLOUR('',#282540); +#285597 = CURVE_STYLE('',#285598,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285599 = STYLED_ITEM('color',(#285600),#18795); +#285600 = PRESENTATION_STYLE_ASSIGNMENT((#285601,#285606)); +#285601 = SURFACE_STYLE_USAGE(.BOTH.,#285602); +#285602 = SURFACE_SIDE_STYLE('',(#285603)); +#285603 = SURFACE_STYLE_FILL_AREA(#285604); +#285604 = FILL_AREA_STYLE('',(#285605)); +#285605 = FILL_AREA_STYLE_COLOUR('',#279624); +#285606 = CURVE_STYLE('',#285607,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285608 = STYLED_ITEM('color',(#285609),#18817); +#285609 = PRESENTATION_STYLE_ASSIGNMENT((#285610,#285615)); +#285610 = SURFACE_STYLE_USAGE(.BOTH.,#285611); +#285611 = SURFACE_SIDE_STYLE('',(#285612)); +#285612 = SURFACE_STYLE_FILL_AREA(#285613); +#285613 = FILL_AREA_STYLE('',(#285614)); +#285614 = FILL_AREA_STYLE_COLOUR('',#282540); +#285615 = CURVE_STYLE('',#285616,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285617 = STYLED_ITEM('color',(#285618),#18909); +#285618 = PRESENTATION_STYLE_ASSIGNMENT((#285619,#285624)); +#285619 = SURFACE_STYLE_USAGE(.BOTH.,#285620); +#285620 = SURFACE_SIDE_STYLE('',(#285621)); +#285621 = SURFACE_STYLE_FILL_AREA(#285622); +#285622 = FILL_AREA_STYLE('',(#285623)); +#285623 = FILL_AREA_STYLE_COLOUR('',#282540); +#285624 = CURVE_STYLE('',#285625,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285626 = STYLED_ITEM('color',(#285627),#18934); +#285627 = PRESENTATION_STYLE_ASSIGNMENT((#285628,#285633)); +#285628 = SURFACE_STYLE_USAGE(.BOTH.,#285629); +#285629 = SURFACE_SIDE_STYLE('',(#285630)); +#285630 = SURFACE_STYLE_FILL_AREA(#285631); +#285631 = FILL_AREA_STYLE('',(#285632)); +#285632 = FILL_AREA_STYLE_COLOUR('',#282540); +#285633 = CURVE_STYLE('',#285634,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285635 = STYLED_ITEM('color',(#285636),#19018); +#285636 = PRESENTATION_STYLE_ASSIGNMENT((#285637,#285642)); +#285637 = SURFACE_STYLE_USAGE(.BOTH.,#285638); +#285638 = SURFACE_SIDE_STYLE('',(#285639)); +#285639 = SURFACE_STYLE_FILL_AREA(#285640); +#285640 = FILL_AREA_STYLE('',(#285641)); +#285641 = FILL_AREA_STYLE_COLOUR('',#282540); +#285642 = CURVE_STYLE('',#285643,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285644 = STYLED_ITEM('color',(#285645),#19035); +#285645 = PRESENTATION_STYLE_ASSIGNMENT((#285646,#285651)); +#285646 = SURFACE_STYLE_USAGE(.BOTH.,#285647); +#285647 = SURFACE_SIDE_STYLE('',(#285648)); +#285648 = SURFACE_STYLE_FILL_AREA(#285649); +#285649 = FILL_AREA_STYLE('',(#285650)); +#285650 = FILL_AREA_STYLE_COLOUR('',#282540); +#285651 = CURVE_STYLE('',#285652,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285653 = STYLED_ITEM('color',(#285654),#19054); +#285654 = PRESENTATION_STYLE_ASSIGNMENT((#285655,#285660)); +#285655 = SURFACE_STYLE_USAGE(.BOTH.,#285656); +#285656 = SURFACE_SIDE_STYLE('',(#285657)); +#285657 = SURFACE_STYLE_FILL_AREA(#285658); +#285658 = FILL_AREA_STYLE('',(#285659)); +#285659 = FILL_AREA_STYLE_COLOUR('',#282540); +#285660 = CURVE_STYLE('',#285661,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285662 = STYLED_ITEM('color',(#285663),#19073); +#285663 = PRESENTATION_STYLE_ASSIGNMENT((#285664,#285669)); +#285664 = SURFACE_STYLE_USAGE(.BOTH.,#285665); +#285665 = SURFACE_SIDE_STYLE('',(#285666)); +#285666 = SURFACE_STYLE_FILL_AREA(#285667); +#285667 = FILL_AREA_STYLE('',(#285668)); +#285668 = FILL_AREA_STYLE_COLOUR('',#282540); +#285669 = CURVE_STYLE('',#285670,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285671 = STYLED_ITEM('color',(#285672),#19092); +#285672 = PRESENTATION_STYLE_ASSIGNMENT((#285673,#285678)); +#285673 = SURFACE_STYLE_USAGE(.BOTH.,#285674); +#285674 = SURFACE_SIDE_STYLE('',(#285675)); +#285675 = SURFACE_STYLE_FILL_AREA(#285676); +#285676 = FILL_AREA_STYLE('',(#285677)); +#285677 = FILL_AREA_STYLE_COLOUR('',#279624); +#285678 = CURVE_STYLE('',#285679,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285680 = STYLED_ITEM('color',(#285681),#19138); +#285681 = PRESENTATION_STYLE_ASSIGNMENT((#285682,#285687)); +#285682 = SURFACE_STYLE_USAGE(.BOTH.,#285683); +#285683 = SURFACE_SIDE_STYLE('',(#285684)); +#285684 = SURFACE_STYLE_FILL_AREA(#285685); +#285685 = FILL_AREA_STYLE('',(#285686)); +#285686 = FILL_AREA_STYLE_COLOUR('',#279624); +#285687 = CURVE_STYLE('',#285688,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285689 = STYLED_ITEM('color',(#285690),#19154); +#285690 = PRESENTATION_STYLE_ASSIGNMENT((#285691,#285696)); +#285691 = SURFACE_STYLE_USAGE(.BOTH.,#285692); +#285692 = SURFACE_SIDE_STYLE('',(#285693)); +#285693 = SURFACE_STYLE_FILL_AREA(#285694); +#285694 = FILL_AREA_STYLE('',(#285695)); +#285695 = FILL_AREA_STYLE_COLOUR('',#282540); +#285696 = CURVE_STYLE('',#285697,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285698 = STYLED_ITEM('color',(#285699),#19173); +#285699 = PRESENTATION_STYLE_ASSIGNMENT((#285700,#285705)); +#285700 = SURFACE_STYLE_USAGE(.BOTH.,#285701); +#285701 = SURFACE_SIDE_STYLE('',(#285702)); +#285702 = SURFACE_STYLE_FILL_AREA(#285703); +#285703 = FILL_AREA_STYLE('',(#285704)); +#285704 = FILL_AREA_STYLE_COLOUR('',#282540); +#285705 = CURVE_STYLE('',#285706,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285707 = STYLED_ITEM('color',(#285708),#19192); +#285708 = PRESENTATION_STYLE_ASSIGNMENT((#285709,#285714)); +#285709 = SURFACE_STYLE_USAGE(.BOTH.,#285710); +#285710 = SURFACE_SIDE_STYLE('',(#285711)); +#285711 = SURFACE_STYLE_FILL_AREA(#285712); +#285712 = FILL_AREA_STYLE('',(#285713)); +#285713 = FILL_AREA_STYLE_COLOUR('',#282540); +#285714 = CURVE_STYLE('',#285715,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285716 = STYLED_ITEM('color',(#285717),#19211); +#285717 = PRESENTATION_STYLE_ASSIGNMENT((#285718,#285723)); +#285718 = SURFACE_STYLE_USAGE(.BOTH.,#285719); +#285719 = SURFACE_SIDE_STYLE('',(#285720)); +#285720 = SURFACE_STYLE_FILL_AREA(#285721); +#285721 = FILL_AREA_STYLE('',(#285722)); +#285722 = FILL_AREA_STYLE_COLOUR('',#279624); +#285723 = CURVE_STYLE('',#285724,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285725 = STYLED_ITEM('color',(#285726),#19227); +#285726 = PRESENTATION_STYLE_ASSIGNMENT((#285727,#285732)); +#285727 = SURFACE_STYLE_USAGE(.BOTH.,#285728); +#285728 = SURFACE_SIDE_STYLE('',(#285729)); +#285729 = SURFACE_STYLE_FILL_AREA(#285730); +#285730 = FILL_AREA_STYLE('',(#285731)); +#285731 = FILL_AREA_STYLE_COLOUR('',#282540); +#285732 = CURVE_STYLE('',#285733,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285734 = STYLED_ITEM('color',(#285735),#19244); +#285735 = PRESENTATION_STYLE_ASSIGNMENT((#285736,#285741)); +#285736 = SURFACE_STYLE_USAGE(.BOTH.,#285737); +#285737 = SURFACE_SIDE_STYLE('',(#285738)); +#285738 = SURFACE_STYLE_FILL_AREA(#285739); +#285739 = FILL_AREA_STYLE('',(#285740)); +#285740 = FILL_AREA_STYLE_COLOUR('',#279624); +#285741 = CURVE_STYLE('',#285742,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#285742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285743 = STYLED_ITEM('color',(#285744),#19256); +#285744 = PRESENTATION_STYLE_ASSIGNMENT((#285745,#285750)); +#285745 = SURFACE_STYLE_USAGE(.BOTH.,#285746); +#285746 = SURFACE_SIDE_STYLE('',(#285747)); +#285747 = SURFACE_STYLE_FILL_AREA(#285748); +#285748 = FILL_AREA_STYLE('',(#285749)); +#285749 = FILL_AREA_STYLE_COLOUR('',#282540); +#285750 = CURVE_STYLE('',#285751,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285752 = STYLED_ITEM('color',(#285753),#19273); +#285753 = PRESENTATION_STYLE_ASSIGNMENT((#285754,#285759)); +#285754 = SURFACE_STYLE_USAGE(.BOTH.,#285755); +#285755 = SURFACE_SIDE_STYLE('',(#285756)); +#285756 = SURFACE_STYLE_FILL_AREA(#285757); +#285757 = FILL_AREA_STYLE('',(#285758)); +#285758 = FILL_AREA_STYLE_COLOUR('',#282540); +#285759 = CURVE_STYLE('',#285760,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285761 = STYLED_ITEM('color',(#285762),#19290); +#285762 = PRESENTATION_STYLE_ASSIGNMENT((#285763,#285768)); +#285763 = SURFACE_STYLE_USAGE(.BOTH.,#285764); +#285764 = SURFACE_SIDE_STYLE('',(#285765)); +#285765 = SURFACE_STYLE_FILL_AREA(#285766); +#285766 = FILL_AREA_STYLE('',(#285767)); +#285767 = FILL_AREA_STYLE_COLOUR('',#282540); +#285768 = CURVE_STYLE('',#285769,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285770 = STYLED_ITEM('color',(#285771),#19307); +#285771 = PRESENTATION_STYLE_ASSIGNMENT((#285772,#285777)); +#285772 = SURFACE_STYLE_USAGE(.BOTH.,#285773); +#285773 = SURFACE_SIDE_STYLE('',(#285774)); +#285774 = SURFACE_STYLE_FILL_AREA(#285775); +#285775 = FILL_AREA_STYLE('',(#285776)); +#285776 = FILL_AREA_STYLE_COLOUR('',#282540); +#285777 = CURVE_STYLE('',#285778,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285779 = STYLED_ITEM('color',(#285780),#19324); +#285780 = PRESENTATION_STYLE_ASSIGNMENT((#285781,#285786)); +#285781 = SURFACE_STYLE_USAGE(.BOTH.,#285782); +#285782 = SURFACE_SIDE_STYLE('',(#285783)); +#285783 = SURFACE_STYLE_FILL_AREA(#285784); +#285784 = FILL_AREA_STYLE('',(#285785)); +#285785 = FILL_AREA_STYLE_COLOUR('',#282540); +#285786 = CURVE_STYLE('',#285787,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285788 = STYLED_ITEM('color',(#285789),#19341); +#285789 = PRESENTATION_STYLE_ASSIGNMENT((#285790,#285795)); +#285790 = SURFACE_STYLE_USAGE(.BOTH.,#285791); +#285791 = SURFACE_SIDE_STYLE('',(#285792)); +#285792 = SURFACE_STYLE_FILL_AREA(#285793); +#285793 = FILL_AREA_STYLE('',(#285794)); +#285794 = FILL_AREA_STYLE_COLOUR('',#282540); +#285795 = CURVE_STYLE('',#285796,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285797 = STYLED_ITEM('color',(#285798),#19358); +#285798 = PRESENTATION_STYLE_ASSIGNMENT((#285799,#285804)); +#285799 = SURFACE_STYLE_USAGE(.BOTH.,#285800); +#285800 = SURFACE_SIDE_STYLE('',(#285801)); +#285801 = SURFACE_STYLE_FILL_AREA(#285802); +#285802 = FILL_AREA_STYLE('',(#285803)); +#285803 = FILL_AREA_STYLE_COLOUR('',#282540); +#285804 = CURVE_STYLE('',#285805,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285806 = STYLED_ITEM('color',(#285807),#19375); +#285807 = PRESENTATION_STYLE_ASSIGNMENT((#285808,#285813)); +#285808 = SURFACE_STYLE_USAGE(.BOTH.,#285809); +#285809 = SURFACE_SIDE_STYLE('',(#285810)); +#285810 = SURFACE_STYLE_FILL_AREA(#285811); +#285811 = FILL_AREA_STYLE('',(#285812)); +#285812 = FILL_AREA_STYLE_COLOUR('',#282540); +#285813 = CURVE_STYLE('',#285814,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285815 = STYLED_ITEM('color',(#285816),#19387); +#285816 = PRESENTATION_STYLE_ASSIGNMENT((#285817,#285822)); +#285817 = SURFACE_STYLE_USAGE(.BOTH.,#285818); +#285818 = SURFACE_SIDE_STYLE('',(#285819)); +#285819 = SURFACE_STYLE_FILL_AREA(#285820); +#285820 = FILL_AREA_STYLE('',(#285821)); +#285821 = FILL_AREA_STYLE_COLOUR('',#282540); +#285822 = CURVE_STYLE('',#285823,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285824 = STYLED_ITEM('color',(#285825),#19404); +#285825 = PRESENTATION_STYLE_ASSIGNMENT((#285826,#285831)); +#285826 = SURFACE_STYLE_USAGE(.BOTH.,#285827); +#285827 = SURFACE_SIDE_STYLE('',(#285828)); +#285828 = SURFACE_STYLE_FILL_AREA(#285829); +#285829 = FILL_AREA_STYLE('',(#285830)); +#285830 = FILL_AREA_STYLE_COLOUR('',#282540); +#285831 = CURVE_STYLE('',#285832,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285833 = STYLED_ITEM('color',(#285834),#19421); +#285834 = PRESENTATION_STYLE_ASSIGNMENT((#285835,#285840)); +#285835 = SURFACE_STYLE_USAGE(.BOTH.,#285836); +#285836 = SURFACE_SIDE_STYLE('',(#285837)); +#285837 = SURFACE_STYLE_FILL_AREA(#285838); +#285838 = FILL_AREA_STYLE('',(#285839)); +#285839 = FILL_AREA_STYLE_COLOUR('',#282540); +#285840 = CURVE_STYLE('',#285841,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285842 = STYLED_ITEM('color',(#285843),#19438); +#285843 = PRESENTATION_STYLE_ASSIGNMENT((#285844,#285849)); +#285844 = SURFACE_STYLE_USAGE(.BOTH.,#285845); +#285845 = SURFACE_SIDE_STYLE('',(#285846)); +#285846 = SURFACE_STYLE_FILL_AREA(#285847); +#285847 = FILL_AREA_STYLE('',(#285848)); +#285848 = FILL_AREA_STYLE_COLOUR('',#282540); +#285849 = CURVE_STYLE('',#285850,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285851 = STYLED_ITEM('color',(#285852),#19455); +#285852 = PRESENTATION_STYLE_ASSIGNMENT((#285853,#285858)); +#285853 = SURFACE_STYLE_USAGE(.BOTH.,#285854); +#285854 = SURFACE_SIDE_STYLE('',(#285855)); +#285855 = SURFACE_STYLE_FILL_AREA(#285856); +#285856 = FILL_AREA_STYLE('',(#285857)); +#285857 = FILL_AREA_STYLE_COLOUR('',#282540); +#285858 = CURVE_STYLE('',#285859,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285860 = STYLED_ITEM('color',(#285861),#19472); +#285861 = PRESENTATION_STYLE_ASSIGNMENT((#285862,#285867)); +#285862 = SURFACE_STYLE_USAGE(.BOTH.,#285863); +#285863 = SURFACE_SIDE_STYLE('',(#285864)); +#285864 = SURFACE_STYLE_FILL_AREA(#285865); +#285865 = FILL_AREA_STYLE('',(#285866)); +#285866 = FILL_AREA_STYLE_COLOUR('',#282540); +#285867 = CURVE_STYLE('',#285868,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285869 = STYLED_ITEM('color',(#285870),#19489); +#285870 = PRESENTATION_STYLE_ASSIGNMENT((#285871,#285876)); +#285871 = SURFACE_STYLE_USAGE(.BOTH.,#285872); +#285872 = SURFACE_SIDE_STYLE('',(#285873)); +#285873 = SURFACE_STYLE_FILL_AREA(#285874); +#285874 = FILL_AREA_STYLE('',(#285875)); +#285875 = FILL_AREA_STYLE_COLOUR('',#282540); +#285876 = CURVE_STYLE('',#285877,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285878 = STYLED_ITEM('color',(#285879),#19506); +#285879 = PRESENTATION_STYLE_ASSIGNMENT((#285880,#285885)); +#285880 = SURFACE_STYLE_USAGE(.BOTH.,#285881); +#285881 = SURFACE_SIDE_STYLE('',(#285882)); +#285882 = SURFACE_STYLE_FILL_AREA(#285883); +#285883 = FILL_AREA_STYLE('',(#285884)); +#285884 = FILL_AREA_STYLE_COLOUR('',#282540); +#285885 = CURVE_STYLE('',#285886,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285887 = STYLED_ITEM('color',(#285888),#19518); +#285888 = PRESENTATION_STYLE_ASSIGNMENT((#285889,#285894)); +#285889 = SURFACE_STYLE_USAGE(.BOTH.,#285890); +#285890 = SURFACE_SIDE_STYLE('',(#285891)); +#285891 = SURFACE_STYLE_FILL_AREA(#285892); +#285892 = FILL_AREA_STYLE('',(#285893)); +#285893 = FILL_AREA_STYLE_COLOUR('',#282540); +#285894 = CURVE_STYLE('',#285895,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285896 = STYLED_ITEM('color',(#285897),#19535); +#285897 = PRESENTATION_STYLE_ASSIGNMENT((#285898,#285903)); +#285898 = SURFACE_STYLE_USAGE(.BOTH.,#285899); +#285899 = SURFACE_SIDE_STYLE('',(#285900)); +#285900 = SURFACE_STYLE_FILL_AREA(#285901); +#285901 = FILL_AREA_STYLE('',(#285902)); +#285902 = FILL_AREA_STYLE_COLOUR('',#282540); +#285903 = CURVE_STYLE('',#285904,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285905 = STYLED_ITEM('color',(#285906),#19552); +#285906 = PRESENTATION_STYLE_ASSIGNMENT((#285907,#285912)); +#285907 = SURFACE_STYLE_USAGE(.BOTH.,#285908); +#285908 = SURFACE_SIDE_STYLE('',(#285909)); +#285909 = SURFACE_STYLE_FILL_AREA(#285910); +#285910 = FILL_AREA_STYLE('',(#285911)); +#285911 = FILL_AREA_STYLE_COLOUR('',#282540); +#285912 = CURVE_STYLE('',#285913,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285914 = STYLED_ITEM('color',(#285915),#19569); +#285915 = PRESENTATION_STYLE_ASSIGNMENT((#285916,#285921)); +#285916 = SURFACE_STYLE_USAGE(.BOTH.,#285917); +#285917 = SURFACE_SIDE_STYLE('',(#285918)); +#285918 = SURFACE_STYLE_FILL_AREA(#285919); +#285919 = FILL_AREA_STYLE('',(#285920)); +#285920 = FILL_AREA_STYLE_COLOUR('',#282540); +#285921 = CURVE_STYLE('',#285922,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285923 = STYLED_ITEM('color',(#285924),#19586); +#285924 = PRESENTATION_STYLE_ASSIGNMENT((#285925,#285930)); +#285925 = SURFACE_STYLE_USAGE(.BOTH.,#285926); +#285926 = SURFACE_SIDE_STYLE('',(#285927)); +#285927 = SURFACE_STYLE_FILL_AREA(#285928); +#285928 = FILL_AREA_STYLE('',(#285929)); +#285929 = FILL_AREA_STYLE_COLOUR('',#282540); +#285930 = CURVE_STYLE('',#285931,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285932 = STYLED_ITEM('color',(#285933),#19603); +#285933 = PRESENTATION_STYLE_ASSIGNMENT((#285934,#285939)); +#285934 = SURFACE_STYLE_USAGE(.BOTH.,#285935); +#285935 = SURFACE_SIDE_STYLE('',(#285936)); +#285936 = SURFACE_STYLE_FILL_AREA(#285937); +#285937 = FILL_AREA_STYLE('',(#285938)); +#285938 = FILL_AREA_STYLE_COLOUR('',#282540); +#285939 = CURVE_STYLE('',#285940,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285941 = STYLED_ITEM('color',(#285942),#19620); +#285942 = PRESENTATION_STYLE_ASSIGNMENT((#285943,#285948)); +#285943 = SURFACE_STYLE_USAGE(.BOTH.,#285944); +#285944 = SURFACE_SIDE_STYLE('',(#285945)); +#285945 = SURFACE_STYLE_FILL_AREA(#285946); +#285946 = FILL_AREA_STYLE('',(#285947)); +#285947 = FILL_AREA_STYLE_COLOUR('',#282540); +#285948 = CURVE_STYLE('',#285949,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285950 = STYLED_ITEM('color',(#285951),#19637); +#285951 = PRESENTATION_STYLE_ASSIGNMENT((#285952,#285957)); +#285952 = SURFACE_STYLE_USAGE(.BOTH.,#285953); +#285953 = SURFACE_SIDE_STYLE('',(#285954)); +#285954 = SURFACE_STYLE_FILL_AREA(#285955); +#285955 = FILL_AREA_STYLE('',(#285956)); +#285956 = FILL_AREA_STYLE_COLOUR('',#282540); +#285957 = CURVE_STYLE('',#285958,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285959 = STYLED_ITEM('color',(#285960),#19649); +#285960 = PRESENTATION_STYLE_ASSIGNMENT((#285961,#285966)); +#285961 = SURFACE_STYLE_USAGE(.BOTH.,#285962); +#285962 = SURFACE_SIDE_STYLE('',(#285963)); +#285963 = SURFACE_STYLE_FILL_AREA(#285964); +#285964 = FILL_AREA_STYLE('',(#285965)); +#285965 = FILL_AREA_STYLE_COLOUR('',#282540); +#285966 = CURVE_STYLE('',#285967,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285968 = STYLED_ITEM('color',(#285969),#19666); +#285969 = PRESENTATION_STYLE_ASSIGNMENT((#285970,#285975)); +#285970 = SURFACE_STYLE_USAGE(.BOTH.,#285971); +#285971 = SURFACE_SIDE_STYLE('',(#285972)); +#285972 = SURFACE_STYLE_FILL_AREA(#285973); +#285973 = FILL_AREA_STYLE('',(#285974)); +#285974 = FILL_AREA_STYLE_COLOUR('',#282540); +#285975 = CURVE_STYLE('',#285976,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285977 = STYLED_ITEM('color',(#285978),#19683); +#285978 = PRESENTATION_STYLE_ASSIGNMENT((#285979,#285984)); +#285979 = SURFACE_STYLE_USAGE(.BOTH.,#285980); +#285980 = SURFACE_SIDE_STYLE('',(#285981)); +#285981 = SURFACE_STYLE_FILL_AREA(#285982); +#285982 = FILL_AREA_STYLE('',(#285983)); +#285983 = FILL_AREA_STYLE_COLOUR('',#282540); +#285984 = CURVE_STYLE('',#285985,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285986 = STYLED_ITEM('color',(#285987),#19700); +#285987 = PRESENTATION_STYLE_ASSIGNMENT((#285988,#285993)); +#285988 = SURFACE_STYLE_USAGE(.BOTH.,#285989); +#285989 = SURFACE_SIDE_STYLE('',(#285990)); +#285990 = SURFACE_STYLE_FILL_AREA(#285991); +#285991 = FILL_AREA_STYLE('',(#285992)); +#285992 = FILL_AREA_STYLE_COLOUR('',#282540); +#285993 = CURVE_STYLE('',#285994,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#285994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285995 = STYLED_ITEM('color',(#285996),#19717); +#285996 = PRESENTATION_STYLE_ASSIGNMENT((#285997,#286002)); +#285997 = SURFACE_STYLE_USAGE(.BOTH.,#285998); +#285998 = SURFACE_SIDE_STYLE('',(#285999)); +#285999 = SURFACE_STYLE_FILL_AREA(#286000); +#286000 = FILL_AREA_STYLE('',(#286001)); +#286001 = FILL_AREA_STYLE_COLOUR('',#282540); +#286002 = CURVE_STYLE('',#286003,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286004 = STYLED_ITEM('color',(#286005),#19734); +#286005 = PRESENTATION_STYLE_ASSIGNMENT((#286006,#286011)); +#286006 = SURFACE_STYLE_USAGE(.BOTH.,#286007); +#286007 = SURFACE_SIDE_STYLE('',(#286008)); +#286008 = SURFACE_STYLE_FILL_AREA(#286009); +#286009 = FILL_AREA_STYLE('',(#286010)); +#286010 = FILL_AREA_STYLE_COLOUR('',#282540); +#286011 = CURVE_STYLE('',#286012,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286013 = STYLED_ITEM('color',(#286014),#19751); +#286014 = PRESENTATION_STYLE_ASSIGNMENT((#286015,#286020)); +#286015 = SURFACE_STYLE_USAGE(.BOTH.,#286016); +#286016 = SURFACE_SIDE_STYLE('',(#286017)); +#286017 = SURFACE_STYLE_FILL_AREA(#286018); +#286018 = FILL_AREA_STYLE('',(#286019)); +#286019 = FILL_AREA_STYLE_COLOUR('',#282540); +#286020 = CURVE_STYLE('',#286021,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286022 = STYLED_ITEM('color',(#286023),#19763); +#286023 = PRESENTATION_STYLE_ASSIGNMENT((#286024,#286029)); +#286024 = SURFACE_STYLE_USAGE(.BOTH.,#286025); +#286025 = SURFACE_SIDE_STYLE('',(#286026)); +#286026 = SURFACE_STYLE_FILL_AREA(#286027); +#286027 = FILL_AREA_STYLE('',(#286028)); +#286028 = FILL_AREA_STYLE_COLOUR('',#282540); +#286029 = CURVE_STYLE('',#286030,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286031 = STYLED_ITEM('color',(#286032),#19780); +#286032 = PRESENTATION_STYLE_ASSIGNMENT((#286033,#286038)); +#286033 = SURFACE_STYLE_USAGE(.BOTH.,#286034); +#286034 = SURFACE_SIDE_STYLE('',(#286035)); +#286035 = SURFACE_STYLE_FILL_AREA(#286036); +#286036 = FILL_AREA_STYLE('',(#286037)); +#286037 = FILL_AREA_STYLE_COLOUR('',#282540); +#286038 = CURVE_STYLE('',#286039,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286040 = STYLED_ITEM('color',(#286041),#19797); +#286041 = PRESENTATION_STYLE_ASSIGNMENT((#286042,#286047)); +#286042 = SURFACE_STYLE_USAGE(.BOTH.,#286043); +#286043 = SURFACE_SIDE_STYLE('',(#286044)); +#286044 = SURFACE_STYLE_FILL_AREA(#286045); +#286045 = FILL_AREA_STYLE('',(#286046)); +#286046 = FILL_AREA_STYLE_COLOUR('',#282540); +#286047 = CURVE_STYLE('',#286048,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286049 = STYLED_ITEM('color',(#286050),#19814); +#286050 = PRESENTATION_STYLE_ASSIGNMENT((#286051,#286056)); +#286051 = SURFACE_STYLE_USAGE(.BOTH.,#286052); +#286052 = SURFACE_SIDE_STYLE('',(#286053)); +#286053 = SURFACE_STYLE_FILL_AREA(#286054); +#286054 = FILL_AREA_STYLE('',(#286055)); +#286055 = FILL_AREA_STYLE_COLOUR('',#282540); +#286056 = CURVE_STYLE('',#286057,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286058 = STYLED_ITEM('color',(#286059),#19831); +#286059 = PRESENTATION_STYLE_ASSIGNMENT((#286060,#286065)); +#286060 = SURFACE_STYLE_USAGE(.BOTH.,#286061); +#286061 = SURFACE_SIDE_STYLE('',(#286062)); +#286062 = SURFACE_STYLE_FILL_AREA(#286063); +#286063 = FILL_AREA_STYLE('',(#286064)); +#286064 = FILL_AREA_STYLE_COLOUR('',#282540); +#286065 = CURVE_STYLE('',#286066,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286067 = STYLED_ITEM('color',(#286068),#19848); +#286068 = PRESENTATION_STYLE_ASSIGNMENT((#286069,#286074)); +#286069 = SURFACE_STYLE_USAGE(.BOTH.,#286070); +#286070 = SURFACE_SIDE_STYLE('',(#286071)); +#286071 = SURFACE_STYLE_FILL_AREA(#286072); +#286072 = FILL_AREA_STYLE('',(#286073)); +#286073 = FILL_AREA_STYLE_COLOUR('',#282540); +#286074 = CURVE_STYLE('',#286075,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286076 = STYLED_ITEM('color',(#286077),#19865); +#286077 = PRESENTATION_STYLE_ASSIGNMENT((#286078,#286083)); +#286078 = SURFACE_STYLE_USAGE(.BOTH.,#286079); +#286079 = SURFACE_SIDE_STYLE('',(#286080)); +#286080 = SURFACE_STYLE_FILL_AREA(#286081); +#286081 = FILL_AREA_STYLE('',(#286082)); +#286082 = FILL_AREA_STYLE_COLOUR('',#282540); +#286083 = CURVE_STYLE('',#286084,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286085 = STYLED_ITEM('color',(#286086),#19877); +#286086 = PRESENTATION_STYLE_ASSIGNMENT((#286087,#286092)); +#286087 = SURFACE_STYLE_USAGE(.BOTH.,#286088); +#286088 = SURFACE_SIDE_STYLE('',(#286089)); +#286089 = SURFACE_STYLE_FILL_AREA(#286090); +#286090 = FILL_AREA_STYLE('',(#286091)); +#286091 = FILL_AREA_STYLE_COLOUR('',#282540); +#286092 = CURVE_STYLE('',#286093,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286094 = STYLED_ITEM('color',(#286095),#19894); +#286095 = PRESENTATION_STYLE_ASSIGNMENT((#286096,#286101)); +#286096 = SURFACE_STYLE_USAGE(.BOTH.,#286097); +#286097 = SURFACE_SIDE_STYLE('',(#286098)); +#286098 = SURFACE_STYLE_FILL_AREA(#286099); +#286099 = FILL_AREA_STYLE('',(#286100)); +#286100 = FILL_AREA_STYLE_COLOUR('',#282540); +#286101 = CURVE_STYLE('',#286102,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286103 = STYLED_ITEM('color',(#286104),#19911); +#286104 = PRESENTATION_STYLE_ASSIGNMENT((#286105,#286110)); +#286105 = SURFACE_STYLE_USAGE(.BOTH.,#286106); +#286106 = SURFACE_SIDE_STYLE('',(#286107)); +#286107 = SURFACE_STYLE_FILL_AREA(#286108); +#286108 = FILL_AREA_STYLE('',(#286109)); +#286109 = FILL_AREA_STYLE_COLOUR('',#282540); +#286110 = CURVE_STYLE('',#286111,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286112 = STYLED_ITEM('color',(#286113),#19928); +#286113 = PRESENTATION_STYLE_ASSIGNMENT((#286114,#286119)); +#286114 = SURFACE_STYLE_USAGE(.BOTH.,#286115); +#286115 = SURFACE_SIDE_STYLE('',(#286116)); +#286116 = SURFACE_STYLE_FILL_AREA(#286117); +#286117 = FILL_AREA_STYLE('',(#286118)); +#286118 = FILL_AREA_STYLE_COLOUR('',#282540); +#286119 = CURVE_STYLE('',#286120,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286121 = STYLED_ITEM('color',(#286122),#19945); +#286122 = PRESENTATION_STYLE_ASSIGNMENT((#286123,#286128)); +#286123 = SURFACE_STYLE_USAGE(.BOTH.,#286124); +#286124 = SURFACE_SIDE_STYLE('',(#286125)); +#286125 = SURFACE_STYLE_FILL_AREA(#286126); +#286126 = FILL_AREA_STYLE('',(#286127)); +#286127 = FILL_AREA_STYLE_COLOUR('',#282540); +#286128 = CURVE_STYLE('',#286129,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286130 = STYLED_ITEM('color',(#286131),#19962); +#286131 = PRESENTATION_STYLE_ASSIGNMENT((#286132,#286137)); +#286132 = SURFACE_STYLE_USAGE(.BOTH.,#286133); +#286133 = SURFACE_SIDE_STYLE('',(#286134)); +#286134 = SURFACE_STYLE_FILL_AREA(#286135); +#286135 = FILL_AREA_STYLE('',(#286136)); +#286136 = FILL_AREA_STYLE_COLOUR('',#282540); +#286137 = CURVE_STYLE('',#286138,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286139 = STYLED_ITEM('color',(#286140),#19979); +#286140 = PRESENTATION_STYLE_ASSIGNMENT((#286141,#286146)); +#286141 = SURFACE_STYLE_USAGE(.BOTH.,#286142); +#286142 = SURFACE_SIDE_STYLE('',(#286143)); +#286143 = SURFACE_STYLE_FILL_AREA(#286144); +#286144 = FILL_AREA_STYLE('',(#286145)); +#286145 = FILL_AREA_STYLE_COLOUR('',#282540); +#286146 = CURVE_STYLE('',#286147,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286148 = STYLED_ITEM('color',(#286149),#19996); +#286149 = PRESENTATION_STYLE_ASSIGNMENT((#286150,#286155)); +#286150 = SURFACE_STYLE_USAGE(.BOTH.,#286151); +#286151 = SURFACE_SIDE_STYLE('',(#286152)); +#286152 = SURFACE_STYLE_FILL_AREA(#286153); +#286153 = FILL_AREA_STYLE('',(#286154)); +#286154 = FILL_AREA_STYLE_COLOUR('',#282540); +#286155 = CURVE_STYLE('',#286156,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286157 = STYLED_ITEM('color',(#286158),#20008); +#286158 = PRESENTATION_STYLE_ASSIGNMENT((#286159,#286164)); +#286159 = SURFACE_STYLE_USAGE(.BOTH.,#286160); +#286160 = SURFACE_SIDE_STYLE('',(#286161)); +#286161 = SURFACE_STYLE_FILL_AREA(#286162); +#286162 = FILL_AREA_STYLE('',(#286163)); +#286163 = FILL_AREA_STYLE_COLOUR('',#282540); +#286164 = CURVE_STYLE('',#286165,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286166 = STYLED_ITEM('color',(#286167),#20025); +#286167 = PRESENTATION_STYLE_ASSIGNMENT((#286168,#286173)); +#286168 = SURFACE_STYLE_USAGE(.BOTH.,#286169); +#286169 = SURFACE_SIDE_STYLE('',(#286170)); +#286170 = SURFACE_STYLE_FILL_AREA(#286171); +#286171 = FILL_AREA_STYLE('',(#286172)); +#286172 = FILL_AREA_STYLE_COLOUR('',#282540); +#286173 = CURVE_STYLE('',#286174,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286175 = STYLED_ITEM('color',(#286176),#20042); +#286176 = PRESENTATION_STYLE_ASSIGNMENT((#286177,#286182)); +#286177 = SURFACE_STYLE_USAGE(.BOTH.,#286178); +#286178 = SURFACE_SIDE_STYLE('',(#286179)); +#286179 = SURFACE_STYLE_FILL_AREA(#286180); +#286180 = FILL_AREA_STYLE('',(#286181)); +#286181 = FILL_AREA_STYLE_COLOUR('',#282540); +#286182 = CURVE_STYLE('',#286183,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286184 = STYLED_ITEM('color',(#286185),#20059); +#286185 = PRESENTATION_STYLE_ASSIGNMENT((#286186,#286191)); +#286186 = SURFACE_STYLE_USAGE(.BOTH.,#286187); +#286187 = SURFACE_SIDE_STYLE('',(#286188)); +#286188 = SURFACE_STYLE_FILL_AREA(#286189); +#286189 = FILL_AREA_STYLE('',(#286190)); +#286190 = FILL_AREA_STYLE_COLOUR('',#282540); +#286191 = CURVE_STYLE('',#286192,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286193 = STYLED_ITEM('color',(#286194),#20076); +#286194 = PRESENTATION_STYLE_ASSIGNMENT((#286195,#286200)); +#286195 = SURFACE_STYLE_USAGE(.BOTH.,#286196); +#286196 = SURFACE_SIDE_STYLE('',(#286197)); +#286197 = SURFACE_STYLE_FILL_AREA(#286198); +#286198 = FILL_AREA_STYLE('',(#286199)); +#286199 = FILL_AREA_STYLE_COLOUR('',#282540); +#286200 = CURVE_STYLE('',#286201,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286202 = STYLED_ITEM('color',(#286203),#20093); +#286203 = PRESENTATION_STYLE_ASSIGNMENT((#286204,#286209)); +#286204 = SURFACE_STYLE_USAGE(.BOTH.,#286205); +#286205 = SURFACE_SIDE_STYLE('',(#286206)); +#286206 = SURFACE_STYLE_FILL_AREA(#286207); +#286207 = FILL_AREA_STYLE('',(#286208)); +#286208 = FILL_AREA_STYLE_COLOUR('',#282540); +#286209 = CURVE_STYLE('',#286210,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286211 = STYLED_ITEM('color',(#286212),#20110); +#286212 = PRESENTATION_STYLE_ASSIGNMENT((#286213,#286218)); +#286213 = SURFACE_STYLE_USAGE(.BOTH.,#286214); +#286214 = SURFACE_SIDE_STYLE('',(#286215)); +#286215 = SURFACE_STYLE_FILL_AREA(#286216); +#286216 = FILL_AREA_STYLE('',(#286217)); +#286217 = FILL_AREA_STYLE_COLOUR('',#282540); +#286218 = CURVE_STYLE('',#286219,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286220 = STYLED_ITEM('color',(#286221),#20127); +#286221 = PRESENTATION_STYLE_ASSIGNMENT((#286222,#286227)); +#286222 = SURFACE_STYLE_USAGE(.BOTH.,#286223); +#286223 = SURFACE_SIDE_STYLE('',(#286224)); +#286224 = SURFACE_STYLE_FILL_AREA(#286225); +#286225 = FILL_AREA_STYLE('',(#286226)); +#286226 = FILL_AREA_STYLE_COLOUR('',#282540); +#286227 = CURVE_STYLE('',#286228,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286229 = STYLED_ITEM('color',(#286230),#20139); +#286230 = PRESENTATION_STYLE_ASSIGNMENT((#286231,#286236)); +#286231 = SURFACE_STYLE_USAGE(.BOTH.,#286232); +#286232 = SURFACE_SIDE_STYLE('',(#286233)); +#286233 = SURFACE_STYLE_FILL_AREA(#286234); +#286234 = FILL_AREA_STYLE('',(#286235)); +#286235 = FILL_AREA_STYLE_COLOUR('',#282540); +#286236 = CURVE_STYLE('',#286237,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286238 = STYLED_ITEM('color',(#286239),#20156); +#286239 = PRESENTATION_STYLE_ASSIGNMENT((#286240,#286245)); +#286240 = SURFACE_STYLE_USAGE(.BOTH.,#286241); +#286241 = SURFACE_SIDE_STYLE('',(#286242)); +#286242 = SURFACE_STYLE_FILL_AREA(#286243); +#286243 = FILL_AREA_STYLE('',(#286244)); +#286244 = FILL_AREA_STYLE_COLOUR('',#282540); +#286245 = CURVE_STYLE('',#286246,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286247 = STYLED_ITEM('color',(#286248),#20173); +#286248 = PRESENTATION_STYLE_ASSIGNMENT((#286249,#286254)); +#286249 = SURFACE_STYLE_USAGE(.BOTH.,#286250); +#286250 = SURFACE_SIDE_STYLE('',(#286251)); +#286251 = SURFACE_STYLE_FILL_AREA(#286252); +#286252 = FILL_AREA_STYLE('',(#286253)); +#286253 = FILL_AREA_STYLE_COLOUR('',#282540); +#286254 = CURVE_STYLE('',#286255,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286256 = STYLED_ITEM('color',(#286257),#20190); +#286257 = PRESENTATION_STYLE_ASSIGNMENT((#286258,#286263)); +#286258 = SURFACE_STYLE_USAGE(.BOTH.,#286259); +#286259 = SURFACE_SIDE_STYLE('',(#286260)); +#286260 = SURFACE_STYLE_FILL_AREA(#286261); +#286261 = FILL_AREA_STYLE('',(#286262)); +#286262 = FILL_AREA_STYLE_COLOUR('',#282540); +#286263 = CURVE_STYLE('',#286264,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286265 = STYLED_ITEM('color',(#286266),#20207); +#286266 = PRESENTATION_STYLE_ASSIGNMENT((#286267,#286272)); +#286267 = SURFACE_STYLE_USAGE(.BOTH.,#286268); +#286268 = SURFACE_SIDE_STYLE('',(#286269)); +#286269 = SURFACE_STYLE_FILL_AREA(#286270); +#286270 = FILL_AREA_STYLE('',(#286271)); +#286271 = FILL_AREA_STYLE_COLOUR('',#282540); +#286272 = CURVE_STYLE('',#286273,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286274 = STYLED_ITEM('color',(#286275),#20224); +#286275 = PRESENTATION_STYLE_ASSIGNMENT((#286276,#286281)); +#286276 = SURFACE_STYLE_USAGE(.BOTH.,#286277); +#286277 = SURFACE_SIDE_STYLE('',(#286278)); +#286278 = SURFACE_STYLE_FILL_AREA(#286279); +#286279 = FILL_AREA_STYLE('',(#286280)); +#286280 = FILL_AREA_STYLE_COLOUR('',#282540); +#286281 = CURVE_STYLE('',#286282,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286283 = STYLED_ITEM('color',(#286284),#20241); +#286284 = PRESENTATION_STYLE_ASSIGNMENT((#286285,#286290)); +#286285 = SURFACE_STYLE_USAGE(.BOTH.,#286286); +#286286 = SURFACE_SIDE_STYLE('',(#286287)); +#286287 = SURFACE_STYLE_FILL_AREA(#286288); +#286288 = FILL_AREA_STYLE('',(#286289)); +#286289 = FILL_AREA_STYLE_COLOUR('',#282540); +#286290 = CURVE_STYLE('',#286291,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286292 = STYLED_ITEM('color',(#286293),#20258); +#286293 = PRESENTATION_STYLE_ASSIGNMENT((#286294,#286299)); +#286294 = SURFACE_STYLE_USAGE(.BOTH.,#286295); +#286295 = SURFACE_SIDE_STYLE('',(#286296)); +#286296 = SURFACE_STYLE_FILL_AREA(#286297); +#286297 = FILL_AREA_STYLE('',(#286298)); +#286298 = FILL_AREA_STYLE_COLOUR('',#282540); +#286299 = CURVE_STYLE('',#286300,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#286300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286301 = STYLED_ITEM('color',(#286302),#20270); +#286302 = PRESENTATION_STYLE_ASSIGNMENT((#286303,#286308)); +#286303 = SURFACE_STYLE_USAGE(.BOTH.,#286304); +#286304 = SURFACE_SIDE_STYLE('',(#286305)); +#286305 = SURFACE_STYLE_FILL_AREA(#286306); +#286306 = FILL_AREA_STYLE('',(#286307)); +#286307 = FILL_AREA_STYLE_COLOUR('',#282905); +#286308 = CURVE_STYLE('',#286309,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#286309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286310 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #286311,#286320,#286329,#286338,#286347,#286356,#286365,#286374, + #286383,#286392,#286401,#286410,#286419,#286428,#286437,#286446, + #286455,#286464,#286473,#286482,#286491,#286500,#286509,#286518, + #286527,#286536,#286545,#286554,#286563,#286572,#286581,#286590, + #286599,#286608,#286617,#286626,#286635,#286644,#286653,#286662, + #286671,#286680,#286689,#286698,#286707,#286716,#286725,#286734, + #286743,#286752,#286761,#286770,#286779,#286788,#286797,#286806, + #286815,#286824,#286833,#286842,#286851,#286860,#286869,#286878, + #286887,#286896,#286905,#286914,#286923,#286932,#286941,#286950, + #286959,#286968,#286977,#286986,#286995,#287004,#287013,#287022, + #287031,#287040,#287049,#287058,#287067,#287076,#287085,#287094, + #287103,#287112,#287121,#287130,#287139,#287148,#287157,#287166, + #287175,#287184,#287193,#287202,#287211,#287220,#287229,#287238, + #287247,#287256,#287265,#287274,#287283,#287292,#287301,#287310, + #287319,#287328,#287337,#287346,#287355,#287364,#287373,#287382, + #287391,#287400,#287409,#287418,#287427,#287436,#287445,#287454, + #287463,#287472,#287481,#287490,#287499,#287508,#287517,#287526, + #287535,#287544,#287553,#287562,#287571,#287580,#287589,#287598, + #287607,#287616,#287625,#287634,#287643,#287652,#287661,#287670, + #287679,#287688,#287697,#287706,#287715,#287724,#287733,#287742, + #287751,#287760,#287769,#287778,#287787,#287796,#287805,#287814, + #287823,#287832,#287841,#287850,#287859,#287868,#287877,#287886, + #287895,#287904,#287913,#287922,#287931,#287940,#287949,#287958, + #287967,#287976,#287985,#287994,#288003,#288012,#288021,#288030, + #288039,#288048,#288057,#288066,#288075,#288084,#288093,#288102, + #288111,#288120,#288129,#288138,#288147,#288156,#288165,#288174, + #288183,#288192,#288201,#288210,#288219,#288228,#288237,#288246, + #288255,#288264,#288273,#288282,#288291,#288300,#288309,#288318, + #288327,#288336,#288345,#288354,#288363,#288372,#288381,#288390, + #288399,#288408,#288417,#288426,#288435,#288444,#288453,#288462, + #288471,#288480,#288489,#288498,#288507,#288516,#288525,#288534, + #288543,#288552,#288561,#288570,#288579,#288588,#288597,#288606, + #288615,#288624,#288633,#288642,#288651,#288660,#288669,#288678, + #288687,#288696,#288705,#288714,#288723,#288732,#288741,#288750, + #288759,#288768,#288777,#288786,#288795,#288804,#288813,#288822, + #288831,#288840,#288849,#288858,#288867,#288876,#288885,#288894, + #288903,#288912,#288921,#288930,#288939,#288948,#288957,#288966, + #288975,#288984,#288993,#289002,#289011,#289020,#289029,#289038, + #289047,#289056,#289065,#289074,#289083,#289092,#289101,#289110, + #289119,#289128,#289137,#289146,#289155,#289164,#289173,#289182, + #289191,#289200,#289209,#289218,#289227,#289236,#289245,#289254, + #289263,#289272,#289281,#289290,#289299,#289308,#289317,#289326, + #289335,#289344,#289353,#289362,#289371,#289380,#289389,#289398, + #289407,#289416,#289425,#289434,#289443,#289452),#123036); +#286311 = STYLED_ITEM('color',(#286312),#114996); +#286312 = PRESENTATION_STYLE_ASSIGNMENT((#286313,#286318)); +#286313 = SURFACE_STYLE_USAGE(.BOTH.,#286314); +#286314 = SURFACE_SIDE_STYLE('',(#286315)); +#286315 = SURFACE_STYLE_FILL_AREA(#286316); +#286316 = FILL_AREA_STYLE('',(#286317)); +#286317 = FILL_AREA_STYLE_COLOUR('',#279624); +#286318 = CURVE_STYLE('',#286319,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286319 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286320 = STYLED_ITEM('color',(#286321),#115036); +#286321 = PRESENTATION_STYLE_ASSIGNMENT((#286322,#286327)); +#286322 = SURFACE_STYLE_USAGE(.BOTH.,#286323); +#286323 = SURFACE_SIDE_STYLE('',(#286324)); +#286324 = SURFACE_STYLE_FILL_AREA(#286325); +#286325 = FILL_AREA_STYLE('',(#286326)); +#286326 = FILL_AREA_STYLE_COLOUR('',#279624); +#286327 = CURVE_STYLE('',#286328,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286328 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286329 = STYLED_ITEM('color',(#286330),#115099); +#286330 = PRESENTATION_STYLE_ASSIGNMENT((#286331,#286336)); +#286331 = SURFACE_STYLE_USAGE(.BOTH.,#286332); +#286332 = SURFACE_SIDE_STYLE('',(#286333)); +#286333 = SURFACE_STYLE_FILL_AREA(#286334); +#286334 = FILL_AREA_STYLE('',(#286335)); +#286335 = FILL_AREA_STYLE_COLOUR('',#279624); +#286336 = CURVE_STYLE('',#286337,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286337 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286338 = STYLED_ITEM('color',(#286339),#115162); +#286339 = PRESENTATION_STYLE_ASSIGNMENT((#286340,#286345)); +#286340 = SURFACE_STYLE_USAGE(.BOTH.,#286341); +#286341 = SURFACE_SIDE_STYLE('',(#286342)); +#286342 = SURFACE_STYLE_FILL_AREA(#286343); +#286343 = FILL_AREA_STYLE('',(#286344)); +#286344 = FILL_AREA_STYLE_COLOUR('',#279624); +#286345 = CURVE_STYLE('',#286346,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286346 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286347 = STYLED_ITEM('color',(#286348),#115179); +#286348 = PRESENTATION_STYLE_ASSIGNMENT((#286349,#286354)); +#286349 = SURFACE_STYLE_USAGE(.BOTH.,#286350); +#286350 = SURFACE_SIDE_STYLE('',(#286351)); +#286351 = SURFACE_STYLE_FILL_AREA(#286352); +#286352 = FILL_AREA_STYLE('',(#286353)); +#286353 = FILL_AREA_STYLE_COLOUR('',#279624); +#286354 = CURVE_STYLE('',#286355,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286355 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286356 = STYLED_ITEM('color',(#286357),#115536); +#286357 = PRESENTATION_STYLE_ASSIGNMENT((#286358,#286363)); +#286358 = SURFACE_STYLE_USAGE(.BOTH.,#286359); +#286359 = SURFACE_SIDE_STYLE('',(#286360)); +#286360 = SURFACE_STYLE_FILL_AREA(#286361); +#286361 = FILL_AREA_STYLE('',(#286362)); +#286362 = FILL_AREA_STYLE_COLOUR('',#279624); +#286363 = CURVE_STYLE('',#286364,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286364 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286365 = STYLED_ITEM('color',(#286366),#115558); +#286366 = PRESENTATION_STYLE_ASSIGNMENT((#286367,#286372)); +#286367 = SURFACE_STYLE_USAGE(.BOTH.,#286368); +#286368 = SURFACE_SIDE_STYLE('',(#286369)); +#286369 = SURFACE_STYLE_FILL_AREA(#286370); +#286370 = FILL_AREA_STYLE('',(#286371)); +#286371 = FILL_AREA_STYLE_COLOUR('',#279624); +#286372 = CURVE_STYLE('',#286373,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286373 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286374 = STYLED_ITEM('color',(#286375),#115575); +#286375 = PRESENTATION_STYLE_ASSIGNMENT((#286376,#286381)); +#286376 = SURFACE_STYLE_USAGE(.BOTH.,#286377); +#286377 = SURFACE_SIDE_STYLE('',(#286378)); +#286378 = SURFACE_STYLE_FILL_AREA(#286379); +#286379 = FILL_AREA_STYLE('',(#286380)); +#286380 = FILL_AREA_STYLE_COLOUR('',#279624); +#286381 = CURVE_STYLE('',#286382,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286382 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286383 = OVER_RIDING_STYLED_ITEM('overriding color',(#286384),#115608, + #286374); +#286384 = PRESENTATION_STYLE_ASSIGNMENT((#286385,#286390)); +#286385 = SURFACE_STYLE_USAGE(.BOTH.,#286386); +#286386 = SURFACE_SIDE_STYLE('',(#286387)); +#286387 = SURFACE_STYLE_FILL_AREA(#286388); +#286388 = FILL_AREA_STYLE('',(#286389)); +#286389 = FILL_AREA_STYLE_COLOUR('',#280691); +#286390 = CURVE_STYLE('',#286391,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286391 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286392 = OVER_RIDING_STYLED_ITEM('overriding color',(#286393),#115640, + #286374); +#286393 = PRESENTATION_STYLE_ASSIGNMENT((#286394,#286399)); +#286394 = SURFACE_STYLE_USAGE(.BOTH.,#286395); +#286395 = SURFACE_SIDE_STYLE('',(#286396)); +#286396 = SURFACE_STYLE_FILL_AREA(#286397); +#286397 = FILL_AREA_STYLE('',(#286398)); +#286398 = FILL_AREA_STYLE_COLOUR('',#280691); +#286399 = CURVE_STYLE('',#286400,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286401 = OVER_RIDING_STYLED_ITEM('overriding color',(#286402),#115674, + #286374); +#286402 = PRESENTATION_STYLE_ASSIGNMENT((#286403,#286408)); +#286403 = SURFACE_STYLE_USAGE(.BOTH.,#286404); +#286404 = SURFACE_SIDE_STYLE('',(#286405)); +#286405 = SURFACE_STYLE_FILL_AREA(#286406); +#286406 = FILL_AREA_STYLE('',(#286407)); +#286407 = FILL_AREA_STYLE_COLOUR('',#280691); +#286408 = CURVE_STYLE('',#286409,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286409 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286410 = OVER_RIDING_STYLED_ITEM('overriding color',(#286411),#115706, + #286374); +#286411 = PRESENTATION_STYLE_ASSIGNMENT((#286412,#286417)); +#286412 = SURFACE_STYLE_USAGE(.BOTH.,#286413); +#286413 = SURFACE_SIDE_STYLE('',(#286414)); +#286414 = SURFACE_STYLE_FILL_AREA(#286415); +#286415 = FILL_AREA_STYLE('',(#286416)); +#286416 = FILL_AREA_STYLE_COLOUR('',#280691); +#286417 = CURVE_STYLE('',#286418,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286418 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286419 = OVER_RIDING_STYLED_ITEM('overriding color',(#286420),#115740, + #286374); +#286420 = PRESENTATION_STYLE_ASSIGNMENT((#286421,#286426)); +#286421 = SURFACE_STYLE_USAGE(.BOTH.,#286422); +#286422 = SURFACE_SIDE_STYLE('',(#286423)); +#286423 = SURFACE_STYLE_FILL_AREA(#286424); +#286424 = FILL_AREA_STYLE('',(#286425)); +#286425 = FILL_AREA_STYLE_COLOUR('',#280691); +#286426 = CURVE_STYLE('',#286427,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286427 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286428 = OVER_RIDING_STYLED_ITEM('overriding color',(#286429),#115772, + #286374); +#286429 = PRESENTATION_STYLE_ASSIGNMENT((#286430,#286435)); +#286430 = SURFACE_STYLE_USAGE(.BOTH.,#286431); +#286431 = SURFACE_SIDE_STYLE('',(#286432)); +#286432 = SURFACE_STYLE_FILL_AREA(#286433); +#286433 = FILL_AREA_STYLE('',(#286434)); +#286434 = FILL_AREA_STYLE_COLOUR('',#280691); +#286435 = CURVE_STYLE('',#286436,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286436 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286437 = OVER_RIDING_STYLED_ITEM('overriding color',(#286438),#115806, + #286374); +#286438 = PRESENTATION_STYLE_ASSIGNMENT((#286439,#286444)); +#286439 = SURFACE_STYLE_USAGE(.BOTH.,#286440); +#286440 = SURFACE_SIDE_STYLE('',(#286441)); +#286441 = SURFACE_STYLE_FILL_AREA(#286442); +#286442 = FILL_AREA_STYLE('',(#286443)); +#286443 = FILL_AREA_STYLE_COLOUR('',#280691); +#286444 = CURVE_STYLE('',#286445,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286445 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286446 = OVER_RIDING_STYLED_ITEM('overriding color',(#286447),#115838, + #286374); +#286447 = PRESENTATION_STYLE_ASSIGNMENT((#286448,#286453)); +#286448 = SURFACE_STYLE_USAGE(.BOTH.,#286449); +#286449 = SURFACE_SIDE_STYLE('',(#286450)); +#286450 = SURFACE_STYLE_FILL_AREA(#286451); +#286451 = FILL_AREA_STYLE('',(#286452)); +#286452 = FILL_AREA_STYLE_COLOUR('',#280691); +#286453 = CURVE_STYLE('',#286454,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286454 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286455 = OVER_RIDING_STYLED_ITEM('overriding color',(#286456),#115872, + #286374); +#286456 = PRESENTATION_STYLE_ASSIGNMENT((#286457,#286462)); +#286457 = SURFACE_STYLE_USAGE(.BOTH.,#286458); +#286458 = SURFACE_SIDE_STYLE('',(#286459)); +#286459 = SURFACE_STYLE_FILL_AREA(#286460); +#286460 = FILL_AREA_STYLE('',(#286461)); +#286461 = FILL_AREA_STYLE_COLOUR('',#280691); +#286462 = CURVE_STYLE('',#286463,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286463 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286464 = OVER_RIDING_STYLED_ITEM('overriding color',(#286465),#115904, + #286374); +#286465 = PRESENTATION_STYLE_ASSIGNMENT((#286466,#286471)); +#286466 = SURFACE_STYLE_USAGE(.BOTH.,#286467); +#286467 = SURFACE_SIDE_STYLE('',(#286468)); +#286468 = SURFACE_STYLE_FILL_AREA(#286469); +#286469 = FILL_AREA_STYLE('',(#286470)); +#286470 = FILL_AREA_STYLE_COLOUR('',#280691); +#286471 = CURVE_STYLE('',#286472,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286472 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286473 = OVER_RIDING_STYLED_ITEM('overriding color',(#286474),#115938, + #286374); +#286474 = PRESENTATION_STYLE_ASSIGNMENT((#286475,#286480)); +#286475 = SURFACE_STYLE_USAGE(.BOTH.,#286476); +#286476 = SURFACE_SIDE_STYLE('',(#286477)); +#286477 = SURFACE_STYLE_FILL_AREA(#286478); +#286478 = FILL_AREA_STYLE('',(#286479)); +#286479 = FILL_AREA_STYLE_COLOUR('',#280691); +#286480 = CURVE_STYLE('',#286481,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286481 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286482 = OVER_RIDING_STYLED_ITEM('overriding color',(#286483),#115970, + #286374); +#286483 = PRESENTATION_STYLE_ASSIGNMENT((#286484,#286489)); +#286484 = SURFACE_STYLE_USAGE(.BOTH.,#286485); +#286485 = SURFACE_SIDE_STYLE('',(#286486)); +#286486 = SURFACE_STYLE_FILL_AREA(#286487); +#286487 = FILL_AREA_STYLE('',(#286488)); +#286488 = FILL_AREA_STYLE_COLOUR('',#280691); +#286489 = CURVE_STYLE('',#286490,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286490 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286491 = OVER_RIDING_STYLED_ITEM('overriding color',(#286492),#116004, + #286374); +#286492 = PRESENTATION_STYLE_ASSIGNMENT((#286493,#286498)); +#286493 = SURFACE_STYLE_USAGE(.BOTH.,#286494); +#286494 = SURFACE_SIDE_STYLE('',(#286495)); +#286495 = SURFACE_STYLE_FILL_AREA(#286496); +#286496 = FILL_AREA_STYLE('',(#286497)); +#286497 = FILL_AREA_STYLE_COLOUR('',#280691); +#286498 = CURVE_STYLE('',#286499,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286499 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286500 = OVER_RIDING_STYLED_ITEM('overriding color',(#286501),#116036, + #286374); +#286501 = PRESENTATION_STYLE_ASSIGNMENT((#286502,#286507)); +#286502 = SURFACE_STYLE_USAGE(.BOTH.,#286503); +#286503 = SURFACE_SIDE_STYLE('',(#286504)); +#286504 = SURFACE_STYLE_FILL_AREA(#286505); +#286505 = FILL_AREA_STYLE('',(#286506)); +#286506 = FILL_AREA_STYLE_COLOUR('',#280691); +#286507 = CURVE_STYLE('',#286508,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286508 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286509 = OVER_RIDING_STYLED_ITEM('overriding color',(#286510),#116070, + #286374); +#286510 = PRESENTATION_STYLE_ASSIGNMENT((#286511,#286516)); +#286511 = SURFACE_STYLE_USAGE(.BOTH.,#286512); +#286512 = SURFACE_SIDE_STYLE('',(#286513)); +#286513 = SURFACE_STYLE_FILL_AREA(#286514); +#286514 = FILL_AREA_STYLE('',(#286515)); +#286515 = FILL_AREA_STYLE_COLOUR('',#280691); +#286516 = CURVE_STYLE('',#286517,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286517 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286518 = OVER_RIDING_STYLED_ITEM('overriding color',(#286519),#116102, + #286374); +#286519 = PRESENTATION_STYLE_ASSIGNMENT((#286520,#286525)); +#286520 = SURFACE_STYLE_USAGE(.BOTH.,#286521); +#286521 = SURFACE_SIDE_STYLE('',(#286522)); +#286522 = SURFACE_STYLE_FILL_AREA(#286523); +#286523 = FILL_AREA_STYLE('',(#286524)); +#286524 = FILL_AREA_STYLE_COLOUR('',#280691); +#286525 = CURVE_STYLE('',#286526,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286526 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286527 = OVER_RIDING_STYLED_ITEM('overriding color',(#286528),#116136, + #286374); +#286528 = PRESENTATION_STYLE_ASSIGNMENT((#286529,#286534)); +#286529 = SURFACE_STYLE_USAGE(.BOTH.,#286530); +#286530 = SURFACE_SIDE_STYLE('',(#286531)); +#286531 = SURFACE_STYLE_FILL_AREA(#286532); +#286532 = FILL_AREA_STYLE('',(#286533)); +#286533 = FILL_AREA_STYLE_COLOUR('',#280691); +#286534 = CURVE_STYLE('',#286535,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286535 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286536 = OVER_RIDING_STYLED_ITEM('overriding color',(#286537),#116168, + #286374); +#286537 = PRESENTATION_STYLE_ASSIGNMENT((#286538,#286543)); +#286538 = SURFACE_STYLE_USAGE(.BOTH.,#286539); +#286539 = SURFACE_SIDE_STYLE('',(#286540)); +#286540 = SURFACE_STYLE_FILL_AREA(#286541); +#286541 = FILL_AREA_STYLE('',(#286542)); +#286542 = FILL_AREA_STYLE_COLOUR('',#280691); +#286543 = CURVE_STYLE('',#286544,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286544 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286545 = OVER_RIDING_STYLED_ITEM('overriding color',(#286546),#116202, + #286374); +#286546 = PRESENTATION_STYLE_ASSIGNMENT((#286547,#286552)); +#286547 = SURFACE_STYLE_USAGE(.BOTH.,#286548); +#286548 = SURFACE_SIDE_STYLE('',(#286549)); +#286549 = SURFACE_STYLE_FILL_AREA(#286550); +#286550 = FILL_AREA_STYLE('',(#286551)); +#286551 = FILL_AREA_STYLE_COLOUR('',#280691); +#286552 = CURVE_STYLE('',#286553,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286553 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286554 = OVER_RIDING_STYLED_ITEM('overriding color',(#286555),#116234, + #286374); +#286555 = PRESENTATION_STYLE_ASSIGNMENT((#286556,#286561)); +#286556 = SURFACE_STYLE_USAGE(.BOTH.,#286557); +#286557 = SURFACE_SIDE_STYLE('',(#286558)); +#286558 = SURFACE_STYLE_FILL_AREA(#286559); +#286559 = FILL_AREA_STYLE('',(#286560)); +#286560 = FILL_AREA_STYLE_COLOUR('',#280691); +#286561 = CURVE_STYLE('',#286562,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286562 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286563 = STYLED_ITEM('color',(#286564),#116252); +#286564 = PRESENTATION_STYLE_ASSIGNMENT((#286565,#286570)); +#286565 = SURFACE_STYLE_USAGE(.BOTH.,#286566); +#286566 = SURFACE_SIDE_STYLE('',(#286567)); +#286567 = SURFACE_STYLE_FILL_AREA(#286568); +#286568 = FILL_AREA_STYLE('',(#286569)); +#286569 = FILL_AREA_STYLE_COLOUR('',#279624); +#286570 = CURVE_STYLE('',#286571,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286571 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286572 = STYLED_ITEM('color',(#286573),#116264); +#286573 = PRESENTATION_STYLE_ASSIGNMENT((#286574,#286579)); +#286574 = SURFACE_STYLE_USAGE(.BOTH.,#286575); +#286575 = SURFACE_SIDE_STYLE('',(#286576)); +#286576 = SURFACE_STYLE_FILL_AREA(#286577); +#286577 = FILL_AREA_STYLE('',(#286578)); +#286578 = FILL_AREA_STYLE_COLOUR('',#279624); +#286579 = CURVE_STYLE('',#286580,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286581 = STYLED_ITEM('color',(#286582),#116276); +#286582 = PRESENTATION_STYLE_ASSIGNMENT((#286583,#286588)); +#286583 = SURFACE_STYLE_USAGE(.BOTH.,#286584); +#286584 = SURFACE_SIDE_STYLE('',(#286585)); +#286585 = SURFACE_STYLE_FILL_AREA(#286586); +#286586 = FILL_AREA_STYLE('',(#286587)); +#286587 = FILL_AREA_STYLE_COLOUR('',#279624); +#286588 = CURVE_STYLE('',#286589,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286590 = STYLED_ITEM('color',(#286591),#116307); +#286591 = PRESENTATION_STYLE_ASSIGNMENT((#286592,#286597)); +#286592 = SURFACE_STYLE_USAGE(.BOTH.,#286593); +#286593 = SURFACE_SIDE_STYLE('',(#286594)); +#286594 = SURFACE_STYLE_FILL_AREA(#286595); +#286595 = FILL_AREA_STYLE('',(#286596)); +#286596 = FILL_AREA_STYLE_COLOUR('',#279624); +#286597 = CURVE_STYLE('',#286598,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286599 = STYLED_ITEM('color',(#286600),#116331); +#286600 = PRESENTATION_STYLE_ASSIGNMENT((#286601,#286606)); +#286601 = SURFACE_STYLE_USAGE(.BOTH.,#286602); +#286602 = SURFACE_SIDE_STYLE('',(#286603)); +#286603 = SURFACE_STYLE_FILL_AREA(#286604); +#286604 = FILL_AREA_STYLE('',(#286605)); +#286605 = FILL_AREA_STYLE_COLOUR('',#279624); +#286606 = CURVE_STYLE('',#286607,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286608 = STYLED_ITEM('color',(#286609),#116355); +#286609 = PRESENTATION_STYLE_ASSIGNMENT((#286610,#286615)); +#286610 = SURFACE_STYLE_USAGE(.BOTH.,#286611); +#286611 = SURFACE_SIDE_STYLE('',(#286612)); +#286612 = SURFACE_STYLE_FILL_AREA(#286613); +#286613 = FILL_AREA_STYLE('',(#286614)); +#286614 = FILL_AREA_STYLE_COLOUR('',#279624); +#286615 = CURVE_STYLE('',#286616,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286617 = STYLED_ITEM('color',(#286618),#116372); +#286618 = PRESENTATION_STYLE_ASSIGNMENT((#286619,#286624)); +#286619 = SURFACE_STYLE_USAGE(.BOTH.,#286620); +#286620 = SURFACE_SIDE_STYLE('',(#286621)); +#286621 = SURFACE_STYLE_FILL_AREA(#286622); +#286622 = FILL_AREA_STYLE('',(#286623)); +#286623 = FILL_AREA_STYLE_COLOUR('',#279624); +#286624 = CURVE_STYLE('',#286625,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286626 = STYLED_ITEM('color',(#286627),#116403); +#286627 = PRESENTATION_STYLE_ASSIGNMENT((#286628,#286633)); +#286628 = SURFACE_STYLE_USAGE(.BOTH.,#286629); +#286629 = SURFACE_SIDE_STYLE('',(#286630)); +#286630 = SURFACE_STYLE_FILL_AREA(#286631); +#286631 = FILL_AREA_STYLE('',(#286632)); +#286632 = FILL_AREA_STYLE_COLOUR('',#279624); +#286633 = CURVE_STYLE('',#286634,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286635 = STYLED_ITEM('color',(#286636),#116427); +#286636 = PRESENTATION_STYLE_ASSIGNMENT((#286637,#286642)); +#286637 = SURFACE_STYLE_USAGE(.BOTH.,#286638); +#286638 = SURFACE_SIDE_STYLE('',(#286639)); +#286639 = SURFACE_STYLE_FILL_AREA(#286640); +#286640 = FILL_AREA_STYLE('',(#286641)); +#286641 = FILL_AREA_STYLE_COLOUR('',#279624); +#286642 = CURVE_STYLE('',#286643,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286644 = STYLED_ITEM('color',(#286645),#116451); +#286645 = PRESENTATION_STYLE_ASSIGNMENT((#286646,#286651)); +#286646 = SURFACE_STYLE_USAGE(.BOTH.,#286647); +#286647 = SURFACE_SIDE_STYLE('',(#286648)); +#286648 = SURFACE_STYLE_FILL_AREA(#286649); +#286649 = FILL_AREA_STYLE('',(#286650)); +#286650 = FILL_AREA_STYLE_COLOUR('',#279624); +#286651 = CURVE_STYLE('',#286652,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286653 = STYLED_ITEM('color',(#286654),#116468); +#286654 = PRESENTATION_STYLE_ASSIGNMENT((#286655,#286660)); +#286655 = SURFACE_STYLE_USAGE(.BOTH.,#286656); +#286656 = SURFACE_SIDE_STYLE('',(#286657)); +#286657 = SURFACE_STYLE_FILL_AREA(#286658); +#286658 = FILL_AREA_STYLE('',(#286659)); +#286659 = FILL_AREA_STYLE_COLOUR('',#279624); +#286660 = CURVE_STYLE('',#286661,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286662 = STYLED_ITEM('color',(#286663),#116499); +#286663 = PRESENTATION_STYLE_ASSIGNMENT((#286664,#286669)); +#286664 = SURFACE_STYLE_USAGE(.BOTH.,#286665); +#286665 = SURFACE_SIDE_STYLE('',(#286666)); +#286666 = SURFACE_STYLE_FILL_AREA(#286667); +#286667 = FILL_AREA_STYLE('',(#286668)); +#286668 = FILL_AREA_STYLE_COLOUR('',#279624); +#286669 = CURVE_STYLE('',#286670,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286671 = STYLED_ITEM('color',(#286672),#116523); +#286672 = PRESENTATION_STYLE_ASSIGNMENT((#286673,#286678)); +#286673 = SURFACE_STYLE_USAGE(.BOTH.,#286674); +#286674 = SURFACE_SIDE_STYLE('',(#286675)); +#286675 = SURFACE_STYLE_FILL_AREA(#286676); +#286676 = FILL_AREA_STYLE('',(#286677)); +#286677 = FILL_AREA_STYLE_COLOUR('',#279624); +#286678 = CURVE_STYLE('',#286679,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286680 = STYLED_ITEM('color',(#286681),#116547); +#286681 = PRESENTATION_STYLE_ASSIGNMENT((#286682,#286687)); +#286682 = SURFACE_STYLE_USAGE(.BOTH.,#286683); +#286683 = SURFACE_SIDE_STYLE('',(#286684)); +#286684 = SURFACE_STYLE_FILL_AREA(#286685); +#286685 = FILL_AREA_STYLE('',(#286686)); +#286686 = FILL_AREA_STYLE_COLOUR('',#279624); +#286687 = CURVE_STYLE('',#286688,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286689 = STYLED_ITEM('color',(#286690),#116564); +#286690 = PRESENTATION_STYLE_ASSIGNMENT((#286691,#286696)); +#286691 = SURFACE_STYLE_USAGE(.BOTH.,#286692); +#286692 = SURFACE_SIDE_STYLE('',(#286693)); +#286693 = SURFACE_STYLE_FILL_AREA(#286694); +#286694 = FILL_AREA_STYLE('',(#286695)); +#286695 = FILL_AREA_STYLE_COLOUR('',#279624); +#286696 = CURVE_STYLE('',#286697,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286698 = STYLED_ITEM('color',(#286699),#116595); +#286699 = PRESENTATION_STYLE_ASSIGNMENT((#286700,#286705)); +#286700 = SURFACE_STYLE_USAGE(.BOTH.,#286701); +#286701 = SURFACE_SIDE_STYLE('',(#286702)); +#286702 = SURFACE_STYLE_FILL_AREA(#286703); +#286703 = FILL_AREA_STYLE('',(#286704)); +#286704 = FILL_AREA_STYLE_COLOUR('',#279624); +#286705 = CURVE_STYLE('',#286706,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286707 = STYLED_ITEM('color',(#286708),#116619); +#286708 = PRESENTATION_STYLE_ASSIGNMENT((#286709,#286714)); +#286709 = SURFACE_STYLE_USAGE(.BOTH.,#286710); +#286710 = SURFACE_SIDE_STYLE('',(#286711)); +#286711 = SURFACE_STYLE_FILL_AREA(#286712); +#286712 = FILL_AREA_STYLE('',(#286713)); +#286713 = FILL_AREA_STYLE_COLOUR('',#279624); +#286714 = CURVE_STYLE('',#286715,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286716 = STYLED_ITEM('color',(#286717),#116643); +#286717 = PRESENTATION_STYLE_ASSIGNMENT((#286718,#286723)); +#286718 = SURFACE_STYLE_USAGE(.BOTH.,#286719); +#286719 = SURFACE_SIDE_STYLE('',(#286720)); +#286720 = SURFACE_STYLE_FILL_AREA(#286721); +#286721 = FILL_AREA_STYLE('',(#286722)); +#286722 = FILL_AREA_STYLE_COLOUR('',#279624); +#286723 = CURVE_STYLE('',#286724,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286725 = STYLED_ITEM('color',(#286726),#116660); +#286726 = PRESENTATION_STYLE_ASSIGNMENT((#286727,#286732)); +#286727 = SURFACE_STYLE_USAGE(.BOTH.,#286728); +#286728 = SURFACE_SIDE_STYLE('',(#286729)); +#286729 = SURFACE_STYLE_FILL_AREA(#286730); +#286730 = FILL_AREA_STYLE('',(#286731)); +#286731 = FILL_AREA_STYLE_COLOUR('',#279624); +#286732 = CURVE_STYLE('',#286733,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286734 = STYLED_ITEM('color',(#286735),#116691); +#286735 = PRESENTATION_STYLE_ASSIGNMENT((#286736,#286741)); +#286736 = SURFACE_STYLE_USAGE(.BOTH.,#286737); +#286737 = SURFACE_SIDE_STYLE('',(#286738)); +#286738 = SURFACE_STYLE_FILL_AREA(#286739); +#286739 = FILL_AREA_STYLE('',(#286740)); +#286740 = FILL_AREA_STYLE_COLOUR('',#279624); +#286741 = CURVE_STYLE('',#286742,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286743 = STYLED_ITEM('color',(#286744),#116715); +#286744 = PRESENTATION_STYLE_ASSIGNMENT((#286745,#286750)); +#286745 = SURFACE_STYLE_USAGE(.BOTH.,#286746); +#286746 = SURFACE_SIDE_STYLE('',(#286747)); +#286747 = SURFACE_STYLE_FILL_AREA(#286748); +#286748 = FILL_AREA_STYLE('',(#286749)); +#286749 = FILL_AREA_STYLE_COLOUR('',#279624); +#286750 = CURVE_STYLE('',#286751,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286752 = STYLED_ITEM('color',(#286753),#116739); +#286753 = PRESENTATION_STYLE_ASSIGNMENT((#286754,#286759)); +#286754 = SURFACE_STYLE_USAGE(.BOTH.,#286755); +#286755 = SURFACE_SIDE_STYLE('',(#286756)); +#286756 = SURFACE_STYLE_FILL_AREA(#286757); +#286757 = FILL_AREA_STYLE('',(#286758)); +#286758 = FILL_AREA_STYLE_COLOUR('',#279624); +#286759 = CURVE_STYLE('',#286760,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286761 = STYLED_ITEM('color',(#286762),#116756); +#286762 = PRESENTATION_STYLE_ASSIGNMENT((#286763,#286768)); +#286763 = SURFACE_STYLE_USAGE(.BOTH.,#286764); +#286764 = SURFACE_SIDE_STYLE('',(#286765)); +#286765 = SURFACE_STYLE_FILL_AREA(#286766); +#286766 = FILL_AREA_STYLE('',(#286767)); +#286767 = FILL_AREA_STYLE_COLOUR('',#279624); +#286768 = CURVE_STYLE('',#286769,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286770 = STYLED_ITEM('color',(#286771),#116787); +#286771 = PRESENTATION_STYLE_ASSIGNMENT((#286772,#286777)); +#286772 = SURFACE_STYLE_USAGE(.BOTH.,#286773); +#286773 = SURFACE_SIDE_STYLE('',(#286774)); +#286774 = SURFACE_STYLE_FILL_AREA(#286775); +#286775 = FILL_AREA_STYLE('',(#286776)); +#286776 = FILL_AREA_STYLE_COLOUR('',#279624); +#286777 = CURVE_STYLE('',#286778,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286779 = STYLED_ITEM('color',(#286780),#116811); +#286780 = PRESENTATION_STYLE_ASSIGNMENT((#286781,#286786)); +#286781 = SURFACE_STYLE_USAGE(.BOTH.,#286782); +#286782 = SURFACE_SIDE_STYLE('',(#286783)); +#286783 = SURFACE_STYLE_FILL_AREA(#286784); +#286784 = FILL_AREA_STYLE('',(#286785)); +#286785 = FILL_AREA_STYLE_COLOUR('',#279624); +#286786 = CURVE_STYLE('',#286787,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286788 = STYLED_ITEM('color',(#286789),#116835); +#286789 = PRESENTATION_STYLE_ASSIGNMENT((#286790,#286795)); +#286790 = SURFACE_STYLE_USAGE(.BOTH.,#286791); +#286791 = SURFACE_SIDE_STYLE('',(#286792)); +#286792 = SURFACE_STYLE_FILL_AREA(#286793); +#286793 = FILL_AREA_STYLE('',(#286794)); +#286794 = FILL_AREA_STYLE_COLOUR('',#279624); +#286795 = CURVE_STYLE('',#286796,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286797 = STYLED_ITEM('color',(#286798),#116852); +#286798 = PRESENTATION_STYLE_ASSIGNMENT((#286799,#286804)); +#286799 = SURFACE_STYLE_USAGE(.BOTH.,#286800); +#286800 = SURFACE_SIDE_STYLE('',(#286801)); +#286801 = SURFACE_STYLE_FILL_AREA(#286802); +#286802 = FILL_AREA_STYLE('',(#286803)); +#286803 = FILL_AREA_STYLE_COLOUR('',#279624); +#286804 = CURVE_STYLE('',#286805,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286806 = STYLED_ITEM('color',(#286807),#116883); +#286807 = PRESENTATION_STYLE_ASSIGNMENT((#286808,#286813)); +#286808 = SURFACE_STYLE_USAGE(.BOTH.,#286809); +#286809 = SURFACE_SIDE_STYLE('',(#286810)); +#286810 = SURFACE_STYLE_FILL_AREA(#286811); +#286811 = FILL_AREA_STYLE('',(#286812)); +#286812 = FILL_AREA_STYLE_COLOUR('',#279624); +#286813 = CURVE_STYLE('',#286814,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286815 = STYLED_ITEM('color',(#286816),#116907); +#286816 = PRESENTATION_STYLE_ASSIGNMENT((#286817,#286822)); +#286817 = SURFACE_STYLE_USAGE(.BOTH.,#286818); +#286818 = SURFACE_SIDE_STYLE('',(#286819)); +#286819 = SURFACE_STYLE_FILL_AREA(#286820); +#286820 = FILL_AREA_STYLE('',(#286821)); +#286821 = FILL_AREA_STYLE_COLOUR('',#279624); +#286822 = CURVE_STYLE('',#286823,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286824 = STYLED_ITEM('color',(#286825),#116931); +#286825 = PRESENTATION_STYLE_ASSIGNMENT((#286826,#286831)); +#286826 = SURFACE_STYLE_USAGE(.BOTH.,#286827); +#286827 = SURFACE_SIDE_STYLE('',(#286828)); +#286828 = SURFACE_STYLE_FILL_AREA(#286829); +#286829 = FILL_AREA_STYLE('',(#286830)); +#286830 = FILL_AREA_STYLE_COLOUR('',#279624); +#286831 = CURVE_STYLE('',#286832,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286833 = STYLED_ITEM('color',(#286834),#116948); +#286834 = PRESENTATION_STYLE_ASSIGNMENT((#286835,#286840)); +#286835 = SURFACE_STYLE_USAGE(.BOTH.,#286836); +#286836 = SURFACE_SIDE_STYLE('',(#286837)); +#286837 = SURFACE_STYLE_FILL_AREA(#286838); +#286838 = FILL_AREA_STYLE('',(#286839)); +#286839 = FILL_AREA_STYLE_COLOUR('',#279624); +#286840 = CURVE_STYLE('',#286841,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286842 = STYLED_ITEM('color',(#286843),#116979); +#286843 = PRESENTATION_STYLE_ASSIGNMENT((#286844,#286849)); +#286844 = SURFACE_STYLE_USAGE(.BOTH.,#286845); +#286845 = SURFACE_SIDE_STYLE('',(#286846)); +#286846 = SURFACE_STYLE_FILL_AREA(#286847); +#286847 = FILL_AREA_STYLE('',(#286848)); +#286848 = FILL_AREA_STYLE_COLOUR('',#279624); +#286849 = CURVE_STYLE('',#286850,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286851 = STYLED_ITEM('color',(#286852),#117003); +#286852 = PRESENTATION_STYLE_ASSIGNMENT((#286853,#286858)); +#286853 = SURFACE_STYLE_USAGE(.BOTH.,#286854); +#286854 = SURFACE_SIDE_STYLE('',(#286855)); +#286855 = SURFACE_STYLE_FILL_AREA(#286856); +#286856 = FILL_AREA_STYLE('',(#286857)); +#286857 = FILL_AREA_STYLE_COLOUR('',#279624); +#286858 = CURVE_STYLE('',#286859,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286860 = STYLED_ITEM('color',(#286861),#117027); +#286861 = PRESENTATION_STYLE_ASSIGNMENT((#286862,#286867)); +#286862 = SURFACE_STYLE_USAGE(.BOTH.,#286863); +#286863 = SURFACE_SIDE_STYLE('',(#286864)); +#286864 = SURFACE_STYLE_FILL_AREA(#286865); +#286865 = FILL_AREA_STYLE('',(#286866)); +#286866 = FILL_AREA_STYLE_COLOUR('',#279624); +#286867 = CURVE_STYLE('',#286868,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286869 = STYLED_ITEM('color',(#286870),#117044); +#286870 = PRESENTATION_STYLE_ASSIGNMENT((#286871,#286876)); +#286871 = SURFACE_STYLE_USAGE(.BOTH.,#286872); +#286872 = SURFACE_SIDE_STYLE('',(#286873)); +#286873 = SURFACE_STYLE_FILL_AREA(#286874); +#286874 = FILL_AREA_STYLE('',(#286875)); +#286875 = FILL_AREA_STYLE_COLOUR('',#279624); +#286876 = CURVE_STYLE('',#286877,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286878 = STYLED_ITEM('color',(#286879),#117075); +#286879 = PRESENTATION_STYLE_ASSIGNMENT((#286880,#286885)); +#286880 = SURFACE_STYLE_USAGE(.BOTH.,#286881); +#286881 = SURFACE_SIDE_STYLE('',(#286882)); +#286882 = SURFACE_STYLE_FILL_AREA(#286883); +#286883 = FILL_AREA_STYLE('',(#286884)); +#286884 = FILL_AREA_STYLE_COLOUR('',#279624); +#286885 = CURVE_STYLE('',#286886,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286887 = STYLED_ITEM('color',(#286888),#117099); +#286888 = PRESENTATION_STYLE_ASSIGNMENT((#286889,#286894)); +#286889 = SURFACE_STYLE_USAGE(.BOTH.,#286890); +#286890 = SURFACE_SIDE_STYLE('',(#286891)); +#286891 = SURFACE_STYLE_FILL_AREA(#286892); +#286892 = FILL_AREA_STYLE('',(#286893)); +#286893 = FILL_AREA_STYLE_COLOUR('',#279624); +#286894 = CURVE_STYLE('',#286895,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286896 = STYLED_ITEM('color',(#286897),#117123); +#286897 = PRESENTATION_STYLE_ASSIGNMENT((#286898,#286903)); +#286898 = SURFACE_STYLE_USAGE(.BOTH.,#286899); +#286899 = SURFACE_SIDE_STYLE('',(#286900)); +#286900 = SURFACE_STYLE_FILL_AREA(#286901); +#286901 = FILL_AREA_STYLE('',(#286902)); +#286902 = FILL_AREA_STYLE_COLOUR('',#279624); +#286903 = CURVE_STYLE('',#286904,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286905 = STYLED_ITEM('color',(#286906),#117140); +#286906 = PRESENTATION_STYLE_ASSIGNMENT((#286907,#286912)); +#286907 = SURFACE_STYLE_USAGE(.BOTH.,#286908); +#286908 = SURFACE_SIDE_STYLE('',(#286909)); +#286909 = SURFACE_STYLE_FILL_AREA(#286910); +#286910 = FILL_AREA_STYLE('',(#286911)); +#286911 = FILL_AREA_STYLE_COLOUR('',#279624); +#286912 = CURVE_STYLE('',#286913,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286914 = STYLED_ITEM('color',(#286915),#117171); +#286915 = PRESENTATION_STYLE_ASSIGNMENT((#286916,#286921)); +#286916 = SURFACE_STYLE_USAGE(.BOTH.,#286917); +#286917 = SURFACE_SIDE_STYLE('',(#286918)); +#286918 = SURFACE_STYLE_FILL_AREA(#286919); +#286919 = FILL_AREA_STYLE('',(#286920)); +#286920 = FILL_AREA_STYLE_COLOUR('',#279624); +#286921 = CURVE_STYLE('',#286922,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286923 = STYLED_ITEM('color',(#286924),#117195); +#286924 = PRESENTATION_STYLE_ASSIGNMENT((#286925,#286930)); +#286925 = SURFACE_STYLE_USAGE(.BOTH.,#286926); +#286926 = SURFACE_SIDE_STYLE('',(#286927)); +#286927 = SURFACE_STYLE_FILL_AREA(#286928); +#286928 = FILL_AREA_STYLE('',(#286929)); +#286929 = FILL_AREA_STYLE_COLOUR('',#279624); +#286930 = CURVE_STYLE('',#286931,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286932 = STYLED_ITEM('color',(#286933),#117219); +#286933 = PRESENTATION_STYLE_ASSIGNMENT((#286934,#286939)); +#286934 = SURFACE_STYLE_USAGE(.BOTH.,#286935); +#286935 = SURFACE_SIDE_STYLE('',(#286936)); +#286936 = SURFACE_STYLE_FILL_AREA(#286937); +#286937 = FILL_AREA_STYLE('',(#286938)); +#286938 = FILL_AREA_STYLE_COLOUR('',#279624); +#286939 = CURVE_STYLE('',#286940,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#286940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286941 = STYLED_ITEM('color',(#286942),#117236); +#286942 = PRESENTATION_STYLE_ASSIGNMENT((#286943,#286948)); +#286943 = SURFACE_STYLE_USAGE(.BOTH.,#286944); +#286944 = SURFACE_SIDE_STYLE('',(#286945)); +#286945 = SURFACE_STYLE_FILL_AREA(#286946); +#286946 = FILL_AREA_STYLE('',(#286947)); +#286947 = FILL_AREA_STYLE_COLOUR('',#280691); +#286948 = CURVE_STYLE('',#286949,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286950 = STYLED_ITEM('color',(#286951),#117253); +#286951 = PRESENTATION_STYLE_ASSIGNMENT((#286952,#286957)); +#286952 = SURFACE_STYLE_USAGE(.BOTH.,#286953); +#286953 = SURFACE_SIDE_STYLE('',(#286954)); +#286954 = SURFACE_STYLE_FILL_AREA(#286955); +#286955 = FILL_AREA_STYLE('',(#286956)); +#286956 = FILL_AREA_STYLE_COLOUR('',#280691); +#286957 = CURVE_STYLE('',#286958,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286959 = STYLED_ITEM('color',(#286960),#117300); +#286960 = PRESENTATION_STYLE_ASSIGNMENT((#286961,#286966)); +#286961 = SURFACE_STYLE_USAGE(.BOTH.,#286962); +#286962 = SURFACE_SIDE_STYLE('',(#286963)); +#286963 = SURFACE_STYLE_FILL_AREA(#286964); +#286964 = FILL_AREA_STYLE('',(#286965)); +#286965 = FILL_AREA_STYLE_COLOUR('',#280691); +#286966 = CURVE_STYLE('',#286967,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286968 = STYLED_ITEM('color',(#286969),#117317); +#286969 = PRESENTATION_STYLE_ASSIGNMENT((#286970,#286975)); +#286970 = SURFACE_STYLE_USAGE(.BOTH.,#286971); +#286971 = SURFACE_SIDE_STYLE('',(#286972)); +#286972 = SURFACE_STYLE_FILL_AREA(#286973); +#286973 = FILL_AREA_STYLE('',(#286974)); +#286974 = FILL_AREA_STYLE_COLOUR('',#280691); +#286975 = CURVE_STYLE('',#286976,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286977 = STYLED_ITEM('color',(#286978),#117364); +#286978 = PRESENTATION_STYLE_ASSIGNMENT((#286979,#286984)); +#286979 = SURFACE_STYLE_USAGE(.BOTH.,#286980); +#286980 = SURFACE_SIDE_STYLE('',(#286981)); +#286981 = SURFACE_STYLE_FILL_AREA(#286982); +#286982 = FILL_AREA_STYLE('',(#286983)); +#286983 = FILL_AREA_STYLE_COLOUR('',#280691); +#286984 = CURVE_STYLE('',#286985,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286986 = STYLED_ITEM('color',(#286987),#117381); +#286987 = PRESENTATION_STYLE_ASSIGNMENT((#286988,#286993)); +#286988 = SURFACE_STYLE_USAGE(.BOTH.,#286989); +#286989 = SURFACE_SIDE_STYLE('',(#286990)); +#286990 = SURFACE_STYLE_FILL_AREA(#286991); +#286991 = FILL_AREA_STYLE('',(#286992)); +#286992 = FILL_AREA_STYLE_COLOUR('',#280691); +#286993 = CURVE_STYLE('',#286994,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#286994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286995 = STYLED_ITEM('color',(#286996),#117428); +#286996 = PRESENTATION_STYLE_ASSIGNMENT((#286997,#287002)); +#286997 = SURFACE_STYLE_USAGE(.BOTH.,#286998); +#286998 = SURFACE_SIDE_STYLE('',(#286999)); +#286999 = SURFACE_STYLE_FILL_AREA(#287000); +#287000 = FILL_AREA_STYLE('',(#287001)); +#287001 = FILL_AREA_STYLE_COLOUR('',#280691); +#287002 = CURVE_STYLE('',#287003,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287004 = STYLED_ITEM('color',(#287005),#117445); +#287005 = PRESENTATION_STYLE_ASSIGNMENT((#287006,#287011)); +#287006 = SURFACE_STYLE_USAGE(.BOTH.,#287007); +#287007 = SURFACE_SIDE_STYLE('',(#287008)); +#287008 = SURFACE_STYLE_FILL_AREA(#287009); +#287009 = FILL_AREA_STYLE('',(#287010)); +#287010 = FILL_AREA_STYLE_COLOUR('',#280691); +#287011 = CURVE_STYLE('',#287012,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287013 = STYLED_ITEM('color',(#287014),#117492); +#287014 = PRESENTATION_STYLE_ASSIGNMENT((#287015,#287020)); +#287015 = SURFACE_STYLE_USAGE(.BOTH.,#287016); +#287016 = SURFACE_SIDE_STYLE('',(#287017)); +#287017 = SURFACE_STYLE_FILL_AREA(#287018); +#287018 = FILL_AREA_STYLE('',(#287019)); +#287019 = FILL_AREA_STYLE_COLOUR('',#280691); +#287020 = CURVE_STYLE('',#287021,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287022 = STYLED_ITEM('color',(#287023),#117509); +#287023 = PRESENTATION_STYLE_ASSIGNMENT((#287024,#287029)); +#287024 = SURFACE_STYLE_USAGE(.BOTH.,#287025); +#287025 = SURFACE_SIDE_STYLE('',(#287026)); +#287026 = SURFACE_STYLE_FILL_AREA(#287027); +#287027 = FILL_AREA_STYLE('',(#287028)); +#287028 = FILL_AREA_STYLE_COLOUR('',#280691); +#287029 = CURVE_STYLE('',#287030,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287031 = STYLED_ITEM('color',(#287032),#117556); +#287032 = PRESENTATION_STYLE_ASSIGNMENT((#287033,#287038)); +#287033 = SURFACE_STYLE_USAGE(.BOTH.,#287034); +#287034 = SURFACE_SIDE_STYLE('',(#287035)); +#287035 = SURFACE_STYLE_FILL_AREA(#287036); +#287036 = FILL_AREA_STYLE('',(#287037)); +#287037 = FILL_AREA_STYLE_COLOUR('',#280691); +#287038 = CURVE_STYLE('',#287039,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287040 = STYLED_ITEM('color',(#287041),#117573); +#287041 = PRESENTATION_STYLE_ASSIGNMENT((#287042,#287047)); +#287042 = SURFACE_STYLE_USAGE(.BOTH.,#287043); +#287043 = SURFACE_SIDE_STYLE('',(#287044)); +#287044 = SURFACE_STYLE_FILL_AREA(#287045); +#287045 = FILL_AREA_STYLE('',(#287046)); +#287046 = FILL_AREA_STYLE_COLOUR('',#280691); +#287047 = CURVE_STYLE('',#287048,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287049 = STYLED_ITEM('color',(#287050),#117620); +#287050 = PRESENTATION_STYLE_ASSIGNMENT((#287051,#287056)); +#287051 = SURFACE_STYLE_USAGE(.BOTH.,#287052); +#287052 = SURFACE_SIDE_STYLE('',(#287053)); +#287053 = SURFACE_STYLE_FILL_AREA(#287054); +#287054 = FILL_AREA_STYLE('',(#287055)); +#287055 = FILL_AREA_STYLE_COLOUR('',#280691); +#287056 = CURVE_STYLE('',#287057,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287058 = STYLED_ITEM('color',(#287059),#117637); +#287059 = PRESENTATION_STYLE_ASSIGNMENT((#287060,#287065)); +#287060 = SURFACE_STYLE_USAGE(.BOTH.,#287061); +#287061 = SURFACE_SIDE_STYLE('',(#287062)); +#287062 = SURFACE_STYLE_FILL_AREA(#287063); +#287063 = FILL_AREA_STYLE('',(#287064)); +#287064 = FILL_AREA_STYLE_COLOUR('',#280691); +#287065 = CURVE_STYLE('',#287066,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287067 = STYLED_ITEM('color',(#287068),#117684); +#287068 = PRESENTATION_STYLE_ASSIGNMENT((#287069,#287074)); +#287069 = SURFACE_STYLE_USAGE(.BOTH.,#287070); +#287070 = SURFACE_SIDE_STYLE('',(#287071)); +#287071 = SURFACE_STYLE_FILL_AREA(#287072); +#287072 = FILL_AREA_STYLE('',(#287073)); +#287073 = FILL_AREA_STYLE_COLOUR('',#280691); +#287074 = CURVE_STYLE('',#287075,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287076 = STYLED_ITEM('color',(#287077),#117701); +#287077 = PRESENTATION_STYLE_ASSIGNMENT((#287078,#287083)); +#287078 = SURFACE_STYLE_USAGE(.BOTH.,#287079); +#287079 = SURFACE_SIDE_STYLE('',(#287080)); +#287080 = SURFACE_STYLE_FILL_AREA(#287081); +#287081 = FILL_AREA_STYLE('',(#287082)); +#287082 = FILL_AREA_STYLE_COLOUR('',#280691); +#287083 = CURVE_STYLE('',#287084,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287085 = STYLED_ITEM('color',(#287086),#117748); +#287086 = PRESENTATION_STYLE_ASSIGNMENT((#287087,#287092)); +#287087 = SURFACE_STYLE_USAGE(.BOTH.,#287088); +#287088 = SURFACE_SIDE_STYLE('',(#287089)); +#287089 = SURFACE_STYLE_FILL_AREA(#287090); +#287090 = FILL_AREA_STYLE('',(#287091)); +#287091 = FILL_AREA_STYLE_COLOUR('',#280691); +#287092 = CURVE_STYLE('',#287093,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287094 = STYLED_ITEM('color',(#287095),#117765); +#287095 = PRESENTATION_STYLE_ASSIGNMENT((#287096,#287101)); +#287096 = SURFACE_STYLE_USAGE(.BOTH.,#287097); +#287097 = SURFACE_SIDE_STYLE('',(#287098)); +#287098 = SURFACE_STYLE_FILL_AREA(#287099); +#287099 = FILL_AREA_STYLE('',(#287100)); +#287100 = FILL_AREA_STYLE_COLOUR('',#280691); +#287101 = CURVE_STYLE('',#287102,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287103 = STYLED_ITEM('color',(#287104),#117812); +#287104 = PRESENTATION_STYLE_ASSIGNMENT((#287105,#287110)); +#287105 = SURFACE_STYLE_USAGE(.BOTH.,#287106); +#287106 = SURFACE_SIDE_STYLE('',(#287107)); +#287107 = SURFACE_STYLE_FILL_AREA(#287108); +#287108 = FILL_AREA_STYLE('',(#287109)); +#287109 = FILL_AREA_STYLE_COLOUR('',#280691); +#287110 = CURVE_STYLE('',#287111,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287112 = STYLED_ITEM('color',(#287113),#117829); +#287113 = PRESENTATION_STYLE_ASSIGNMENT((#287114,#287119)); +#287114 = SURFACE_STYLE_USAGE(.BOTH.,#287115); +#287115 = SURFACE_SIDE_STYLE('',(#287116)); +#287116 = SURFACE_STYLE_FILL_AREA(#287117); +#287117 = FILL_AREA_STYLE('',(#287118)); +#287118 = FILL_AREA_STYLE_COLOUR('',#280691); +#287119 = CURVE_STYLE('',#287120,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287121 = STYLED_ITEM('color',(#287122),#117876); +#287122 = PRESENTATION_STYLE_ASSIGNMENT((#287123,#287128)); +#287123 = SURFACE_STYLE_USAGE(.BOTH.,#287124); +#287124 = SURFACE_SIDE_STYLE('',(#287125)); +#287125 = SURFACE_STYLE_FILL_AREA(#287126); +#287126 = FILL_AREA_STYLE('',(#287127)); +#287127 = FILL_AREA_STYLE_COLOUR('',#280691); +#287128 = CURVE_STYLE('',#287129,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287130 = STYLED_ITEM('color',(#287131),#117893); +#287131 = PRESENTATION_STYLE_ASSIGNMENT((#287132,#287137)); +#287132 = SURFACE_STYLE_USAGE(.BOTH.,#287133); +#287133 = SURFACE_SIDE_STYLE('',(#287134)); +#287134 = SURFACE_STYLE_FILL_AREA(#287135); +#287135 = FILL_AREA_STYLE('',(#287136)); +#287136 = FILL_AREA_STYLE_COLOUR('',#280691); +#287137 = CURVE_STYLE('',#287138,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287139 = STYLED_ITEM('color',(#287140),#117940); +#287140 = PRESENTATION_STYLE_ASSIGNMENT((#287141,#287146)); +#287141 = SURFACE_STYLE_USAGE(.BOTH.,#287142); +#287142 = SURFACE_SIDE_STYLE('',(#287143)); +#287143 = SURFACE_STYLE_FILL_AREA(#287144); +#287144 = FILL_AREA_STYLE('',(#287145)); +#287145 = FILL_AREA_STYLE_COLOUR('',#280691); +#287146 = CURVE_STYLE('',#287147,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287148 = STYLED_ITEM('color',(#287149),#117957); +#287149 = PRESENTATION_STYLE_ASSIGNMENT((#287150,#287155)); +#287150 = SURFACE_STYLE_USAGE(.BOTH.,#287151); +#287151 = SURFACE_SIDE_STYLE('',(#287152)); +#287152 = SURFACE_STYLE_FILL_AREA(#287153); +#287153 = FILL_AREA_STYLE('',(#287154)); +#287154 = FILL_AREA_STYLE_COLOUR('',#280691); +#287155 = CURVE_STYLE('',#287156,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287157 = STYLED_ITEM('color',(#287158),#118004); +#287158 = PRESENTATION_STYLE_ASSIGNMENT((#287159,#287164)); +#287159 = SURFACE_STYLE_USAGE(.BOTH.,#287160); +#287160 = SURFACE_SIDE_STYLE('',(#287161)); +#287161 = SURFACE_STYLE_FILL_AREA(#287162); +#287162 = FILL_AREA_STYLE('',(#287163)); +#287163 = FILL_AREA_STYLE_COLOUR('',#280691); +#287164 = CURVE_STYLE('',#287165,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287166 = STYLED_ITEM('color',(#287167),#118021); +#287167 = PRESENTATION_STYLE_ASSIGNMENT((#287168,#287173)); +#287168 = SURFACE_STYLE_USAGE(.BOTH.,#287169); +#287169 = SURFACE_SIDE_STYLE('',(#287170)); +#287170 = SURFACE_STYLE_FILL_AREA(#287171); +#287171 = FILL_AREA_STYLE('',(#287172)); +#287172 = FILL_AREA_STYLE_COLOUR('',#280691); +#287173 = CURVE_STYLE('',#287174,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287175 = STYLED_ITEM('color',(#287176),#118068); +#287176 = PRESENTATION_STYLE_ASSIGNMENT((#287177,#287182)); +#287177 = SURFACE_STYLE_USAGE(.BOTH.,#287178); +#287178 = SURFACE_SIDE_STYLE('',(#287179)); +#287179 = SURFACE_STYLE_FILL_AREA(#287180); +#287180 = FILL_AREA_STYLE('',(#287181)); +#287181 = FILL_AREA_STYLE_COLOUR('',#280691); +#287182 = CURVE_STYLE('',#287183,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287184 = STYLED_ITEM('color',(#287185),#118085); +#287185 = PRESENTATION_STYLE_ASSIGNMENT((#287186,#287191)); +#287186 = SURFACE_STYLE_USAGE(.BOTH.,#287187); +#287187 = SURFACE_SIDE_STYLE('',(#287188)); +#287188 = SURFACE_STYLE_FILL_AREA(#287189); +#287189 = FILL_AREA_STYLE('',(#287190)); +#287190 = FILL_AREA_STYLE_COLOUR('',#280691); +#287191 = CURVE_STYLE('',#287192,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287193 = STYLED_ITEM('color',(#287194),#118132); +#287194 = PRESENTATION_STYLE_ASSIGNMENT((#287195,#287200)); +#287195 = SURFACE_STYLE_USAGE(.BOTH.,#287196); +#287196 = SURFACE_SIDE_STYLE('',(#287197)); +#287197 = SURFACE_STYLE_FILL_AREA(#287198); +#287198 = FILL_AREA_STYLE('',(#287199)); +#287199 = FILL_AREA_STYLE_COLOUR('',#280691); +#287200 = CURVE_STYLE('',#287201,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287202 = STYLED_ITEM('color',(#287203),#118149); +#287203 = PRESENTATION_STYLE_ASSIGNMENT((#287204,#287209)); +#287204 = SURFACE_STYLE_USAGE(.BOTH.,#287205); +#287205 = SURFACE_SIDE_STYLE('',(#287206)); +#287206 = SURFACE_STYLE_FILL_AREA(#287207); +#287207 = FILL_AREA_STYLE('',(#287208)); +#287208 = FILL_AREA_STYLE_COLOUR('',#280691); +#287209 = CURVE_STYLE('',#287210,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287211 = STYLED_ITEM('color',(#287212),#118196); +#287212 = PRESENTATION_STYLE_ASSIGNMENT((#287213,#287218)); +#287213 = SURFACE_STYLE_USAGE(.BOTH.,#287214); +#287214 = SURFACE_SIDE_STYLE('',(#287215)); +#287215 = SURFACE_STYLE_FILL_AREA(#287216); +#287216 = FILL_AREA_STYLE('',(#287217)); +#287217 = FILL_AREA_STYLE_COLOUR('',#280691); +#287218 = CURVE_STYLE('',#287219,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287220 = STYLED_ITEM('color',(#287221),#118213); +#287221 = PRESENTATION_STYLE_ASSIGNMENT((#287222,#287227)); +#287222 = SURFACE_STYLE_USAGE(.BOTH.,#287223); +#287223 = SURFACE_SIDE_STYLE('',(#287224)); +#287224 = SURFACE_STYLE_FILL_AREA(#287225); +#287225 = FILL_AREA_STYLE('',(#287226)); +#287226 = FILL_AREA_STYLE_COLOUR('',#280691); +#287227 = CURVE_STYLE('',#287228,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287229 = STYLED_ITEM('color',(#287230),#118260); +#287230 = PRESENTATION_STYLE_ASSIGNMENT((#287231,#287236)); +#287231 = SURFACE_STYLE_USAGE(.BOTH.,#287232); +#287232 = SURFACE_SIDE_STYLE('',(#287233)); +#287233 = SURFACE_STYLE_FILL_AREA(#287234); +#287234 = FILL_AREA_STYLE('',(#287235)); +#287235 = FILL_AREA_STYLE_COLOUR('',#280691); +#287236 = CURVE_STYLE('',#287237,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287238 = STYLED_ITEM('color',(#287239),#118277); +#287239 = PRESENTATION_STYLE_ASSIGNMENT((#287240,#287245)); +#287240 = SURFACE_STYLE_USAGE(.BOTH.,#287241); +#287241 = SURFACE_SIDE_STYLE('',(#287242)); +#287242 = SURFACE_STYLE_FILL_AREA(#287243); +#287243 = FILL_AREA_STYLE('',(#287244)); +#287244 = FILL_AREA_STYLE_COLOUR('',#280691); +#287245 = CURVE_STYLE('',#287246,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287247 = STYLED_ITEM('color',(#287248),#118324); +#287248 = PRESENTATION_STYLE_ASSIGNMENT((#287249,#287254)); +#287249 = SURFACE_STYLE_USAGE(.BOTH.,#287250); +#287250 = SURFACE_SIDE_STYLE('',(#287251)); +#287251 = SURFACE_STYLE_FILL_AREA(#287252); +#287252 = FILL_AREA_STYLE('',(#287253)); +#287253 = FILL_AREA_STYLE_COLOUR('',#280691); +#287254 = CURVE_STYLE('',#287255,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287256 = STYLED_ITEM('color',(#287257),#118341); +#287257 = PRESENTATION_STYLE_ASSIGNMENT((#287258,#287263)); +#287258 = SURFACE_STYLE_USAGE(.BOTH.,#287259); +#287259 = SURFACE_SIDE_STYLE('',(#287260)); +#287260 = SURFACE_STYLE_FILL_AREA(#287261); +#287261 = FILL_AREA_STYLE('',(#287262)); +#287262 = FILL_AREA_STYLE_COLOUR('',#280691); +#287263 = CURVE_STYLE('',#287264,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287265 = STYLED_ITEM('color',(#287266),#118388); +#287266 = PRESENTATION_STYLE_ASSIGNMENT((#287267,#287272)); +#287267 = SURFACE_STYLE_USAGE(.BOTH.,#287268); +#287268 = SURFACE_SIDE_STYLE('',(#287269)); +#287269 = SURFACE_STYLE_FILL_AREA(#287270); +#287270 = FILL_AREA_STYLE('',(#287271)); +#287271 = FILL_AREA_STYLE_COLOUR('',#280691); +#287272 = CURVE_STYLE('',#287273,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287274 = STYLED_ITEM('color',(#287275),#118405); +#287275 = PRESENTATION_STYLE_ASSIGNMENT((#287276,#287281)); +#287276 = SURFACE_STYLE_USAGE(.BOTH.,#287277); +#287277 = SURFACE_SIDE_STYLE('',(#287278)); +#287278 = SURFACE_STYLE_FILL_AREA(#287279); +#287279 = FILL_AREA_STYLE('',(#287280)); +#287280 = FILL_AREA_STYLE_COLOUR('',#280691); +#287281 = CURVE_STYLE('',#287282,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287283 = STYLED_ITEM('color',(#287284),#118452); +#287284 = PRESENTATION_STYLE_ASSIGNMENT((#287285,#287290)); +#287285 = SURFACE_STYLE_USAGE(.BOTH.,#287286); +#287286 = SURFACE_SIDE_STYLE('',(#287287)); +#287287 = SURFACE_STYLE_FILL_AREA(#287288); +#287288 = FILL_AREA_STYLE('',(#287289)); +#287289 = FILL_AREA_STYLE_COLOUR('',#280691); +#287290 = CURVE_STYLE('',#287291,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287292 = STYLED_ITEM('color',(#287293),#118469); +#287293 = PRESENTATION_STYLE_ASSIGNMENT((#287294,#287299)); +#287294 = SURFACE_STYLE_USAGE(.BOTH.,#287295); +#287295 = SURFACE_SIDE_STYLE('',(#287296)); +#287296 = SURFACE_STYLE_FILL_AREA(#287297); +#287297 = FILL_AREA_STYLE('',(#287298)); +#287298 = FILL_AREA_STYLE_COLOUR('',#280691); +#287299 = CURVE_STYLE('',#287300,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287301 = STYLED_ITEM('color',(#287302),#118516); +#287302 = PRESENTATION_STYLE_ASSIGNMENT((#287303,#287308)); +#287303 = SURFACE_STYLE_USAGE(.BOTH.,#287304); +#287304 = SURFACE_SIDE_STYLE('',(#287305)); +#287305 = SURFACE_STYLE_FILL_AREA(#287306); +#287306 = FILL_AREA_STYLE('',(#287307)); +#287307 = FILL_AREA_STYLE_COLOUR('',#279624); +#287308 = CURVE_STYLE('',#287309,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287310 = STYLED_ITEM('color',(#287311),#118547); +#287311 = PRESENTATION_STYLE_ASSIGNMENT((#287312,#287317)); +#287312 = SURFACE_STYLE_USAGE(.BOTH.,#287313); +#287313 = SURFACE_SIDE_STYLE('',(#287314)); +#287314 = SURFACE_STYLE_FILL_AREA(#287315); +#287315 = FILL_AREA_STYLE('',(#287316)); +#287316 = FILL_AREA_STYLE_COLOUR('',#279624); +#287317 = CURVE_STYLE('',#287318,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287319 = OVER_RIDING_STYLED_ITEM('overriding color',(#287320),#118561, + #287310); +#287320 = PRESENTATION_STYLE_ASSIGNMENT((#287321,#287326)); +#287321 = SURFACE_STYLE_USAGE(.BOTH.,#287322); +#287322 = SURFACE_SIDE_STYLE('',(#287323)); +#287323 = SURFACE_STYLE_FILL_AREA(#287324); +#287324 = FILL_AREA_STYLE('',(#287325)); +#287325 = FILL_AREA_STYLE_COLOUR('',#280691); +#287326 = CURVE_STYLE('',#287327,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287328 = OVER_RIDING_STYLED_ITEM('overriding color',(#287329),#118577, + #287310); +#287329 = PRESENTATION_STYLE_ASSIGNMENT((#287330,#287335)); +#287330 = SURFACE_STYLE_USAGE(.BOTH.,#287331); +#287331 = SURFACE_SIDE_STYLE('',(#287332)); +#287332 = SURFACE_STYLE_FILL_AREA(#287333); +#287333 = FILL_AREA_STYLE('',(#287334)); +#287334 = FILL_AREA_STYLE_COLOUR('',#280691); +#287335 = CURVE_STYLE('',#287336,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287337 = STYLED_ITEM('color',(#287338),#118603); +#287338 = PRESENTATION_STYLE_ASSIGNMENT((#287339,#287344)); +#287339 = SURFACE_STYLE_USAGE(.BOTH.,#287340); +#287340 = SURFACE_SIDE_STYLE('',(#287341)); +#287341 = SURFACE_STYLE_FILL_AREA(#287342); +#287342 = FILL_AREA_STYLE('',(#287343)); +#287343 = FILL_AREA_STYLE_COLOUR('',#279624); +#287344 = CURVE_STYLE('',#287345,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287346 = STYLED_ITEM('color',(#287347),#118627); +#287347 = PRESENTATION_STYLE_ASSIGNMENT((#287348,#287353)); +#287348 = SURFACE_STYLE_USAGE(.BOTH.,#287349); +#287349 = SURFACE_SIDE_STYLE('',(#287350)); +#287350 = SURFACE_STYLE_FILL_AREA(#287351); +#287351 = FILL_AREA_STYLE('',(#287352)); +#287352 = FILL_AREA_STYLE_COLOUR('',#279624); +#287353 = CURVE_STYLE('',#287354,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287355 = OVER_RIDING_STYLED_ITEM('overriding color',(#287356),#118641, + #287346); +#287356 = PRESENTATION_STYLE_ASSIGNMENT((#287357,#287362)); +#287357 = SURFACE_STYLE_USAGE(.BOTH.,#287358); +#287358 = SURFACE_SIDE_STYLE('',(#287359)); +#287359 = SURFACE_STYLE_FILL_AREA(#287360); +#287360 = FILL_AREA_STYLE('',(#287361)); +#287361 = FILL_AREA_STYLE_COLOUR('',#280691); +#287362 = CURVE_STYLE('',#287363,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287364 = OVER_RIDING_STYLED_ITEM('overriding color',(#287365),#118657, + #287346); +#287365 = PRESENTATION_STYLE_ASSIGNMENT((#287366,#287371)); +#287366 = SURFACE_STYLE_USAGE(.BOTH.,#287367); +#287367 = SURFACE_SIDE_STYLE('',(#287368)); +#287368 = SURFACE_STYLE_FILL_AREA(#287369); +#287369 = FILL_AREA_STYLE('',(#287370)); +#287370 = FILL_AREA_STYLE_COLOUR('',#280691); +#287371 = CURVE_STYLE('',#287372,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287373 = STYLED_ITEM('color',(#287374),#118676); +#287374 = PRESENTATION_STYLE_ASSIGNMENT((#287375,#287380)); +#287375 = SURFACE_STYLE_USAGE(.BOTH.,#287376); +#287376 = SURFACE_SIDE_STYLE('',(#287377)); +#287377 = SURFACE_STYLE_FILL_AREA(#287378); +#287378 = FILL_AREA_STYLE('',(#287379)); +#287379 = FILL_AREA_STYLE_COLOUR('',#279624); +#287380 = CURVE_STYLE('',#287381,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287382 = STYLED_ITEM('color',(#287383),#118707); +#287383 = PRESENTATION_STYLE_ASSIGNMENT((#287384,#287389)); +#287384 = SURFACE_STYLE_USAGE(.BOTH.,#287385); +#287385 = SURFACE_SIDE_STYLE('',(#287386)); +#287386 = SURFACE_STYLE_FILL_AREA(#287387); +#287387 = FILL_AREA_STYLE('',(#287388)); +#287388 = FILL_AREA_STYLE_COLOUR('',#279624); +#287389 = CURVE_STYLE('',#287390,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287391 = OVER_RIDING_STYLED_ITEM('overriding color',(#287392),#118721, + #287382); +#287392 = PRESENTATION_STYLE_ASSIGNMENT((#287393,#287398)); +#287393 = SURFACE_STYLE_USAGE(.BOTH.,#287394); +#287394 = SURFACE_SIDE_STYLE('',(#287395)); +#287395 = SURFACE_STYLE_FILL_AREA(#287396); +#287396 = FILL_AREA_STYLE('',(#287397)); +#287397 = FILL_AREA_STYLE_COLOUR('',#280691); +#287398 = CURVE_STYLE('',#287399,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287400 = OVER_RIDING_STYLED_ITEM('overriding color',(#287401),#118737, + #287382); +#287401 = PRESENTATION_STYLE_ASSIGNMENT((#287402,#287407)); +#287402 = SURFACE_STYLE_USAGE(.BOTH.,#287403); +#287403 = SURFACE_SIDE_STYLE('',(#287404)); +#287404 = SURFACE_STYLE_FILL_AREA(#287405); +#287405 = FILL_AREA_STYLE('',(#287406)); +#287406 = FILL_AREA_STYLE_COLOUR('',#280691); +#287407 = CURVE_STYLE('',#287408,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287409 = STYLED_ITEM('color',(#287410),#118763); +#287410 = PRESENTATION_STYLE_ASSIGNMENT((#287411,#287416)); +#287411 = SURFACE_STYLE_USAGE(.BOTH.,#287412); +#287412 = SURFACE_SIDE_STYLE('',(#287413)); +#287413 = SURFACE_STYLE_FILL_AREA(#287414); +#287414 = FILL_AREA_STYLE('',(#287415)); +#287415 = FILL_AREA_STYLE_COLOUR('',#279624); +#287416 = CURVE_STYLE('',#287417,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287418 = STYLED_ITEM('color',(#287419),#118787); +#287419 = PRESENTATION_STYLE_ASSIGNMENT((#287420,#287425)); +#287420 = SURFACE_STYLE_USAGE(.BOTH.,#287421); +#287421 = SURFACE_SIDE_STYLE('',(#287422)); +#287422 = SURFACE_STYLE_FILL_AREA(#287423); +#287423 = FILL_AREA_STYLE('',(#287424)); +#287424 = FILL_AREA_STYLE_COLOUR('',#279624); +#287425 = CURVE_STYLE('',#287426,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287427 = OVER_RIDING_STYLED_ITEM('overriding color',(#287428),#118801, + #287418); +#287428 = PRESENTATION_STYLE_ASSIGNMENT((#287429,#287434)); +#287429 = SURFACE_STYLE_USAGE(.BOTH.,#287430); +#287430 = SURFACE_SIDE_STYLE('',(#287431)); +#287431 = SURFACE_STYLE_FILL_AREA(#287432); +#287432 = FILL_AREA_STYLE('',(#287433)); +#287433 = FILL_AREA_STYLE_COLOUR('',#280691); +#287434 = CURVE_STYLE('',#287435,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287436 = OVER_RIDING_STYLED_ITEM('overriding color',(#287437),#118817, + #287418); +#287437 = PRESENTATION_STYLE_ASSIGNMENT((#287438,#287443)); +#287438 = SURFACE_STYLE_USAGE(.BOTH.,#287439); +#287439 = SURFACE_SIDE_STYLE('',(#287440)); +#287440 = SURFACE_STYLE_FILL_AREA(#287441); +#287441 = FILL_AREA_STYLE('',(#287442)); +#287442 = FILL_AREA_STYLE_COLOUR('',#280691); +#287443 = CURVE_STYLE('',#287444,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287445 = STYLED_ITEM('color',(#287446),#118836); +#287446 = PRESENTATION_STYLE_ASSIGNMENT((#287447,#287452)); +#287447 = SURFACE_STYLE_USAGE(.BOTH.,#287448); +#287448 = SURFACE_SIDE_STYLE('',(#287449)); +#287449 = SURFACE_STYLE_FILL_AREA(#287450); +#287450 = FILL_AREA_STYLE('',(#287451)); +#287451 = FILL_AREA_STYLE_COLOUR('',#279624); +#287452 = CURVE_STYLE('',#287453,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287454 = STYLED_ITEM('color',(#287455),#118867); +#287455 = PRESENTATION_STYLE_ASSIGNMENT((#287456,#287461)); +#287456 = SURFACE_STYLE_USAGE(.BOTH.,#287457); +#287457 = SURFACE_SIDE_STYLE('',(#287458)); +#287458 = SURFACE_STYLE_FILL_AREA(#287459); +#287459 = FILL_AREA_STYLE('',(#287460)); +#287460 = FILL_AREA_STYLE_COLOUR('',#279624); +#287461 = CURVE_STYLE('',#287462,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287463 = OVER_RIDING_STYLED_ITEM('overriding color',(#287464),#118881, + #287454); +#287464 = PRESENTATION_STYLE_ASSIGNMENT((#287465,#287470)); +#287465 = SURFACE_STYLE_USAGE(.BOTH.,#287466); +#287466 = SURFACE_SIDE_STYLE('',(#287467)); +#287467 = SURFACE_STYLE_FILL_AREA(#287468); +#287468 = FILL_AREA_STYLE('',(#287469)); +#287469 = FILL_AREA_STYLE_COLOUR('',#280691); +#287470 = CURVE_STYLE('',#287471,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287472 = OVER_RIDING_STYLED_ITEM('overriding color',(#287473),#118897, + #287454); +#287473 = PRESENTATION_STYLE_ASSIGNMENT((#287474,#287479)); +#287474 = SURFACE_STYLE_USAGE(.BOTH.,#287475); +#287475 = SURFACE_SIDE_STYLE('',(#287476)); +#287476 = SURFACE_STYLE_FILL_AREA(#287477); +#287477 = FILL_AREA_STYLE('',(#287478)); +#287478 = FILL_AREA_STYLE_COLOUR('',#280691); +#287479 = CURVE_STYLE('',#287480,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287481 = STYLED_ITEM('color',(#287482),#118923); +#287482 = PRESENTATION_STYLE_ASSIGNMENT((#287483,#287488)); +#287483 = SURFACE_STYLE_USAGE(.BOTH.,#287484); +#287484 = SURFACE_SIDE_STYLE('',(#287485)); +#287485 = SURFACE_STYLE_FILL_AREA(#287486); +#287486 = FILL_AREA_STYLE('',(#287487)); +#287487 = FILL_AREA_STYLE_COLOUR('',#279624); +#287488 = CURVE_STYLE('',#287489,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287490 = STYLED_ITEM('color',(#287491),#118947); +#287491 = PRESENTATION_STYLE_ASSIGNMENT((#287492,#287497)); +#287492 = SURFACE_STYLE_USAGE(.BOTH.,#287493); +#287493 = SURFACE_SIDE_STYLE('',(#287494)); +#287494 = SURFACE_STYLE_FILL_AREA(#287495); +#287495 = FILL_AREA_STYLE('',(#287496)); +#287496 = FILL_AREA_STYLE_COLOUR('',#279624); +#287497 = CURVE_STYLE('',#287498,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287499 = OVER_RIDING_STYLED_ITEM('overriding color',(#287500),#118961, + #287490); +#287500 = PRESENTATION_STYLE_ASSIGNMENT((#287501,#287506)); +#287501 = SURFACE_STYLE_USAGE(.BOTH.,#287502); +#287502 = SURFACE_SIDE_STYLE('',(#287503)); +#287503 = SURFACE_STYLE_FILL_AREA(#287504); +#287504 = FILL_AREA_STYLE('',(#287505)); +#287505 = FILL_AREA_STYLE_COLOUR('',#280691); +#287506 = CURVE_STYLE('',#287507,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287508 = OVER_RIDING_STYLED_ITEM('overriding color',(#287509),#118977, + #287490); +#287509 = PRESENTATION_STYLE_ASSIGNMENT((#287510,#287515)); +#287510 = SURFACE_STYLE_USAGE(.BOTH.,#287511); +#287511 = SURFACE_SIDE_STYLE('',(#287512)); +#287512 = SURFACE_STYLE_FILL_AREA(#287513); +#287513 = FILL_AREA_STYLE('',(#287514)); +#287514 = FILL_AREA_STYLE_COLOUR('',#280691); +#287515 = CURVE_STYLE('',#287516,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287517 = STYLED_ITEM('color',(#287518),#118996); +#287518 = PRESENTATION_STYLE_ASSIGNMENT((#287519,#287524)); +#287519 = SURFACE_STYLE_USAGE(.BOTH.,#287520); +#287520 = SURFACE_SIDE_STYLE('',(#287521)); +#287521 = SURFACE_STYLE_FILL_AREA(#287522); +#287522 = FILL_AREA_STYLE('',(#287523)); +#287523 = FILL_AREA_STYLE_COLOUR('',#279624); +#287524 = CURVE_STYLE('',#287525,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287526 = STYLED_ITEM('color',(#287527),#119027); +#287527 = PRESENTATION_STYLE_ASSIGNMENT((#287528,#287533)); +#287528 = SURFACE_STYLE_USAGE(.BOTH.,#287529); +#287529 = SURFACE_SIDE_STYLE('',(#287530)); +#287530 = SURFACE_STYLE_FILL_AREA(#287531); +#287531 = FILL_AREA_STYLE('',(#287532)); +#287532 = FILL_AREA_STYLE_COLOUR('',#279624); +#287533 = CURVE_STYLE('',#287534,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287535 = OVER_RIDING_STYLED_ITEM('overriding color',(#287536),#119041, + #287526); +#287536 = PRESENTATION_STYLE_ASSIGNMENT((#287537,#287542)); +#287537 = SURFACE_STYLE_USAGE(.BOTH.,#287538); +#287538 = SURFACE_SIDE_STYLE('',(#287539)); +#287539 = SURFACE_STYLE_FILL_AREA(#287540); +#287540 = FILL_AREA_STYLE('',(#287541)); +#287541 = FILL_AREA_STYLE_COLOUR('',#280691); +#287542 = CURVE_STYLE('',#287543,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287544 = OVER_RIDING_STYLED_ITEM('overriding color',(#287545),#119057, + #287526); +#287545 = PRESENTATION_STYLE_ASSIGNMENT((#287546,#287551)); +#287546 = SURFACE_STYLE_USAGE(.BOTH.,#287547); +#287547 = SURFACE_SIDE_STYLE('',(#287548)); +#287548 = SURFACE_STYLE_FILL_AREA(#287549); +#287549 = FILL_AREA_STYLE('',(#287550)); +#287550 = FILL_AREA_STYLE_COLOUR('',#280691); +#287551 = CURVE_STYLE('',#287552,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287553 = STYLED_ITEM('color',(#287554),#119083); +#287554 = PRESENTATION_STYLE_ASSIGNMENT((#287555,#287560)); +#287555 = SURFACE_STYLE_USAGE(.BOTH.,#287556); +#287556 = SURFACE_SIDE_STYLE('',(#287557)); +#287557 = SURFACE_STYLE_FILL_AREA(#287558); +#287558 = FILL_AREA_STYLE('',(#287559)); +#287559 = FILL_AREA_STYLE_COLOUR('',#279624); +#287560 = CURVE_STYLE('',#287561,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287562 = STYLED_ITEM('color',(#287563),#119107); +#287563 = PRESENTATION_STYLE_ASSIGNMENT((#287564,#287569)); +#287564 = SURFACE_STYLE_USAGE(.BOTH.,#287565); +#287565 = SURFACE_SIDE_STYLE('',(#287566)); +#287566 = SURFACE_STYLE_FILL_AREA(#287567); +#287567 = FILL_AREA_STYLE('',(#287568)); +#287568 = FILL_AREA_STYLE_COLOUR('',#279624); +#287569 = CURVE_STYLE('',#287570,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287571 = OVER_RIDING_STYLED_ITEM('overriding color',(#287572),#119121, + #287562); +#287572 = PRESENTATION_STYLE_ASSIGNMENT((#287573,#287578)); +#287573 = SURFACE_STYLE_USAGE(.BOTH.,#287574); +#287574 = SURFACE_SIDE_STYLE('',(#287575)); +#287575 = SURFACE_STYLE_FILL_AREA(#287576); +#287576 = FILL_AREA_STYLE('',(#287577)); +#287577 = FILL_AREA_STYLE_COLOUR('',#280691); +#287578 = CURVE_STYLE('',#287579,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287580 = OVER_RIDING_STYLED_ITEM('overriding color',(#287581),#119137, + #287562); +#287581 = PRESENTATION_STYLE_ASSIGNMENT((#287582,#287587)); +#287582 = SURFACE_STYLE_USAGE(.BOTH.,#287583); +#287583 = SURFACE_SIDE_STYLE('',(#287584)); +#287584 = SURFACE_STYLE_FILL_AREA(#287585); +#287585 = FILL_AREA_STYLE('',(#287586)); +#287586 = FILL_AREA_STYLE_COLOUR('',#280691); +#287587 = CURVE_STYLE('',#287588,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287589 = STYLED_ITEM('color',(#287590),#119156); +#287590 = PRESENTATION_STYLE_ASSIGNMENT((#287591,#287596)); +#287591 = SURFACE_STYLE_USAGE(.BOTH.,#287592); +#287592 = SURFACE_SIDE_STYLE('',(#287593)); +#287593 = SURFACE_STYLE_FILL_AREA(#287594); +#287594 = FILL_AREA_STYLE('',(#287595)); +#287595 = FILL_AREA_STYLE_COLOUR('',#279624); +#287596 = CURVE_STYLE('',#287597,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287598 = STYLED_ITEM('color',(#287599),#119187); +#287599 = PRESENTATION_STYLE_ASSIGNMENT((#287600,#287605)); +#287600 = SURFACE_STYLE_USAGE(.BOTH.,#287601); +#287601 = SURFACE_SIDE_STYLE('',(#287602)); +#287602 = SURFACE_STYLE_FILL_AREA(#287603); +#287603 = FILL_AREA_STYLE('',(#287604)); +#287604 = FILL_AREA_STYLE_COLOUR('',#279624); +#287605 = CURVE_STYLE('',#287606,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287607 = OVER_RIDING_STYLED_ITEM('overriding color',(#287608),#119201, + #287598); +#287608 = PRESENTATION_STYLE_ASSIGNMENT((#287609,#287614)); +#287609 = SURFACE_STYLE_USAGE(.BOTH.,#287610); +#287610 = SURFACE_SIDE_STYLE('',(#287611)); +#287611 = SURFACE_STYLE_FILL_AREA(#287612); +#287612 = FILL_AREA_STYLE('',(#287613)); +#287613 = FILL_AREA_STYLE_COLOUR('',#280691); +#287614 = CURVE_STYLE('',#287615,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287616 = OVER_RIDING_STYLED_ITEM('overriding color',(#287617),#119217, + #287598); +#287617 = PRESENTATION_STYLE_ASSIGNMENT((#287618,#287623)); +#287618 = SURFACE_STYLE_USAGE(.BOTH.,#287619); +#287619 = SURFACE_SIDE_STYLE('',(#287620)); +#287620 = SURFACE_STYLE_FILL_AREA(#287621); +#287621 = FILL_AREA_STYLE('',(#287622)); +#287622 = FILL_AREA_STYLE_COLOUR('',#280691); +#287623 = CURVE_STYLE('',#287624,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287625 = STYLED_ITEM('color',(#287626),#119243); +#287626 = PRESENTATION_STYLE_ASSIGNMENT((#287627,#287632)); +#287627 = SURFACE_STYLE_USAGE(.BOTH.,#287628); +#287628 = SURFACE_SIDE_STYLE('',(#287629)); +#287629 = SURFACE_STYLE_FILL_AREA(#287630); +#287630 = FILL_AREA_STYLE('',(#287631)); +#287631 = FILL_AREA_STYLE_COLOUR('',#279624); +#287632 = CURVE_STYLE('',#287633,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287634 = STYLED_ITEM('color',(#287635),#119267); +#287635 = PRESENTATION_STYLE_ASSIGNMENT((#287636,#287641)); +#287636 = SURFACE_STYLE_USAGE(.BOTH.,#287637); +#287637 = SURFACE_SIDE_STYLE('',(#287638)); +#287638 = SURFACE_STYLE_FILL_AREA(#287639); +#287639 = FILL_AREA_STYLE('',(#287640)); +#287640 = FILL_AREA_STYLE_COLOUR('',#279624); +#287641 = CURVE_STYLE('',#287642,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287643 = OVER_RIDING_STYLED_ITEM('overriding color',(#287644),#119281, + #287634); +#287644 = PRESENTATION_STYLE_ASSIGNMENT((#287645,#287650)); +#287645 = SURFACE_STYLE_USAGE(.BOTH.,#287646); +#287646 = SURFACE_SIDE_STYLE('',(#287647)); +#287647 = SURFACE_STYLE_FILL_AREA(#287648); +#287648 = FILL_AREA_STYLE('',(#287649)); +#287649 = FILL_AREA_STYLE_COLOUR('',#280691); +#287650 = CURVE_STYLE('',#287651,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287652 = OVER_RIDING_STYLED_ITEM('overriding color',(#287653),#119297, + #287634); +#287653 = PRESENTATION_STYLE_ASSIGNMENT((#287654,#287659)); +#287654 = SURFACE_STYLE_USAGE(.BOTH.,#287655); +#287655 = SURFACE_SIDE_STYLE('',(#287656)); +#287656 = SURFACE_STYLE_FILL_AREA(#287657); +#287657 = FILL_AREA_STYLE('',(#287658)); +#287658 = FILL_AREA_STYLE_COLOUR('',#280691); +#287659 = CURVE_STYLE('',#287660,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287661 = STYLED_ITEM('color',(#287662),#119316); +#287662 = PRESENTATION_STYLE_ASSIGNMENT((#287663,#287668)); +#287663 = SURFACE_STYLE_USAGE(.BOTH.,#287664); +#287664 = SURFACE_SIDE_STYLE('',(#287665)); +#287665 = SURFACE_STYLE_FILL_AREA(#287666); +#287666 = FILL_AREA_STYLE('',(#287667)); +#287667 = FILL_AREA_STYLE_COLOUR('',#279624); +#287668 = CURVE_STYLE('',#287669,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287670 = STYLED_ITEM('color',(#287671),#119347); +#287671 = PRESENTATION_STYLE_ASSIGNMENT((#287672,#287677)); +#287672 = SURFACE_STYLE_USAGE(.BOTH.,#287673); +#287673 = SURFACE_SIDE_STYLE('',(#287674)); +#287674 = SURFACE_STYLE_FILL_AREA(#287675); +#287675 = FILL_AREA_STYLE('',(#287676)); +#287676 = FILL_AREA_STYLE_COLOUR('',#279624); +#287677 = CURVE_STYLE('',#287678,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287679 = OVER_RIDING_STYLED_ITEM('overriding color',(#287680),#119361, + #287670); +#287680 = PRESENTATION_STYLE_ASSIGNMENT((#287681,#287686)); +#287681 = SURFACE_STYLE_USAGE(.BOTH.,#287682); +#287682 = SURFACE_SIDE_STYLE('',(#287683)); +#287683 = SURFACE_STYLE_FILL_AREA(#287684); +#287684 = FILL_AREA_STYLE('',(#287685)); +#287685 = FILL_AREA_STYLE_COLOUR('',#280691); +#287686 = CURVE_STYLE('',#287687,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287688 = OVER_RIDING_STYLED_ITEM('overriding color',(#287689),#119377, + #287670); +#287689 = PRESENTATION_STYLE_ASSIGNMENT((#287690,#287695)); +#287690 = SURFACE_STYLE_USAGE(.BOTH.,#287691); +#287691 = SURFACE_SIDE_STYLE('',(#287692)); +#287692 = SURFACE_STYLE_FILL_AREA(#287693); +#287693 = FILL_AREA_STYLE('',(#287694)); +#287694 = FILL_AREA_STYLE_COLOUR('',#280691); +#287695 = CURVE_STYLE('',#287696,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287697 = STYLED_ITEM('color',(#287698),#119403); +#287698 = PRESENTATION_STYLE_ASSIGNMENT((#287699,#287704)); +#287699 = SURFACE_STYLE_USAGE(.BOTH.,#287700); +#287700 = SURFACE_SIDE_STYLE('',(#287701)); +#287701 = SURFACE_STYLE_FILL_AREA(#287702); +#287702 = FILL_AREA_STYLE('',(#287703)); +#287703 = FILL_AREA_STYLE_COLOUR('',#279624); +#287704 = CURVE_STYLE('',#287705,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287706 = STYLED_ITEM('color',(#287707),#119427); +#287707 = PRESENTATION_STYLE_ASSIGNMENT((#287708,#287713)); +#287708 = SURFACE_STYLE_USAGE(.BOTH.,#287709); +#287709 = SURFACE_SIDE_STYLE('',(#287710)); +#287710 = SURFACE_STYLE_FILL_AREA(#287711); +#287711 = FILL_AREA_STYLE('',(#287712)); +#287712 = FILL_AREA_STYLE_COLOUR('',#279624); +#287713 = CURVE_STYLE('',#287714,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287715 = OVER_RIDING_STYLED_ITEM('overriding color',(#287716),#119441, + #287706); +#287716 = PRESENTATION_STYLE_ASSIGNMENT((#287717,#287722)); +#287717 = SURFACE_STYLE_USAGE(.BOTH.,#287718); +#287718 = SURFACE_SIDE_STYLE('',(#287719)); +#287719 = SURFACE_STYLE_FILL_AREA(#287720); +#287720 = FILL_AREA_STYLE('',(#287721)); +#287721 = FILL_AREA_STYLE_COLOUR('',#280691); +#287722 = CURVE_STYLE('',#287723,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287724 = OVER_RIDING_STYLED_ITEM('overriding color',(#287725),#119457, + #287706); +#287725 = PRESENTATION_STYLE_ASSIGNMENT((#287726,#287731)); +#287726 = SURFACE_STYLE_USAGE(.BOTH.,#287727); +#287727 = SURFACE_SIDE_STYLE('',(#287728)); +#287728 = SURFACE_STYLE_FILL_AREA(#287729); +#287729 = FILL_AREA_STYLE('',(#287730)); +#287730 = FILL_AREA_STYLE_COLOUR('',#280691); +#287731 = CURVE_STYLE('',#287732,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287733 = STYLED_ITEM('color',(#287734),#119476); +#287734 = PRESENTATION_STYLE_ASSIGNMENT((#287735,#287740)); +#287735 = SURFACE_STYLE_USAGE(.BOTH.,#287736); +#287736 = SURFACE_SIDE_STYLE('',(#287737)); +#287737 = SURFACE_STYLE_FILL_AREA(#287738); +#287738 = FILL_AREA_STYLE('',(#287739)); +#287739 = FILL_AREA_STYLE_COLOUR('',#279624); +#287740 = CURVE_STYLE('',#287741,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287742 = STYLED_ITEM('color',(#287743),#119507); +#287743 = PRESENTATION_STYLE_ASSIGNMENT((#287744,#287749)); +#287744 = SURFACE_STYLE_USAGE(.BOTH.,#287745); +#287745 = SURFACE_SIDE_STYLE('',(#287746)); +#287746 = SURFACE_STYLE_FILL_AREA(#287747); +#287747 = FILL_AREA_STYLE('',(#287748)); +#287748 = FILL_AREA_STYLE_COLOUR('',#279624); +#287749 = CURVE_STYLE('',#287750,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287751 = OVER_RIDING_STYLED_ITEM('overriding color',(#287752),#119521, + #287742); +#287752 = PRESENTATION_STYLE_ASSIGNMENT((#287753,#287758)); +#287753 = SURFACE_STYLE_USAGE(.BOTH.,#287754); +#287754 = SURFACE_SIDE_STYLE('',(#287755)); +#287755 = SURFACE_STYLE_FILL_AREA(#287756); +#287756 = FILL_AREA_STYLE('',(#287757)); +#287757 = FILL_AREA_STYLE_COLOUR('',#280691); +#287758 = CURVE_STYLE('',#287759,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287760 = OVER_RIDING_STYLED_ITEM('overriding color',(#287761),#119537, + #287742); +#287761 = PRESENTATION_STYLE_ASSIGNMENT((#287762,#287767)); +#287762 = SURFACE_STYLE_USAGE(.BOTH.,#287763); +#287763 = SURFACE_SIDE_STYLE('',(#287764)); +#287764 = SURFACE_STYLE_FILL_AREA(#287765); +#287765 = FILL_AREA_STYLE('',(#287766)); +#287766 = FILL_AREA_STYLE_COLOUR('',#280691); +#287767 = CURVE_STYLE('',#287768,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287769 = STYLED_ITEM('color',(#287770),#119563); +#287770 = PRESENTATION_STYLE_ASSIGNMENT((#287771,#287776)); +#287771 = SURFACE_STYLE_USAGE(.BOTH.,#287772); +#287772 = SURFACE_SIDE_STYLE('',(#287773)); +#287773 = SURFACE_STYLE_FILL_AREA(#287774); +#287774 = FILL_AREA_STYLE('',(#287775)); +#287775 = FILL_AREA_STYLE_COLOUR('',#279624); +#287776 = CURVE_STYLE('',#287777,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287778 = STYLED_ITEM('color',(#287779),#119587); +#287779 = PRESENTATION_STYLE_ASSIGNMENT((#287780,#287785)); +#287780 = SURFACE_STYLE_USAGE(.BOTH.,#287781); +#287781 = SURFACE_SIDE_STYLE('',(#287782)); +#287782 = SURFACE_STYLE_FILL_AREA(#287783); +#287783 = FILL_AREA_STYLE('',(#287784)); +#287784 = FILL_AREA_STYLE_COLOUR('',#279624); +#287785 = CURVE_STYLE('',#287786,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287787 = OVER_RIDING_STYLED_ITEM('overriding color',(#287788),#119601, + #287778); +#287788 = PRESENTATION_STYLE_ASSIGNMENT((#287789,#287794)); +#287789 = SURFACE_STYLE_USAGE(.BOTH.,#287790); +#287790 = SURFACE_SIDE_STYLE('',(#287791)); +#287791 = SURFACE_STYLE_FILL_AREA(#287792); +#287792 = FILL_AREA_STYLE('',(#287793)); +#287793 = FILL_AREA_STYLE_COLOUR('',#280691); +#287794 = CURVE_STYLE('',#287795,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287796 = OVER_RIDING_STYLED_ITEM('overriding color',(#287797),#119617, + #287778); +#287797 = PRESENTATION_STYLE_ASSIGNMENT((#287798,#287803)); +#287798 = SURFACE_STYLE_USAGE(.BOTH.,#287799); +#287799 = SURFACE_SIDE_STYLE('',(#287800)); +#287800 = SURFACE_STYLE_FILL_AREA(#287801); +#287801 = FILL_AREA_STYLE('',(#287802)); +#287802 = FILL_AREA_STYLE_COLOUR('',#280691); +#287803 = CURVE_STYLE('',#287804,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287805 = STYLED_ITEM('color',(#287806),#119636); +#287806 = PRESENTATION_STYLE_ASSIGNMENT((#287807,#287812)); +#287807 = SURFACE_STYLE_USAGE(.BOTH.,#287808); +#287808 = SURFACE_SIDE_STYLE('',(#287809)); +#287809 = SURFACE_STYLE_FILL_AREA(#287810); +#287810 = FILL_AREA_STYLE('',(#287811)); +#287811 = FILL_AREA_STYLE_COLOUR('',#279624); +#287812 = CURVE_STYLE('',#287813,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287814 = STYLED_ITEM('color',(#287815),#119667); +#287815 = PRESENTATION_STYLE_ASSIGNMENT((#287816,#287821)); +#287816 = SURFACE_STYLE_USAGE(.BOTH.,#287817); +#287817 = SURFACE_SIDE_STYLE('',(#287818)); +#287818 = SURFACE_STYLE_FILL_AREA(#287819); +#287819 = FILL_AREA_STYLE('',(#287820)); +#287820 = FILL_AREA_STYLE_COLOUR('',#279624); +#287821 = CURVE_STYLE('',#287822,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287823 = OVER_RIDING_STYLED_ITEM('overriding color',(#287824),#119681, + #287814); +#287824 = PRESENTATION_STYLE_ASSIGNMENT((#287825,#287830)); +#287825 = SURFACE_STYLE_USAGE(.BOTH.,#287826); +#287826 = SURFACE_SIDE_STYLE('',(#287827)); +#287827 = SURFACE_STYLE_FILL_AREA(#287828); +#287828 = FILL_AREA_STYLE('',(#287829)); +#287829 = FILL_AREA_STYLE_COLOUR('',#280691); +#287830 = CURVE_STYLE('',#287831,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287832 = OVER_RIDING_STYLED_ITEM('overriding color',(#287833),#119697, + #287814); +#287833 = PRESENTATION_STYLE_ASSIGNMENT((#287834,#287839)); +#287834 = SURFACE_STYLE_USAGE(.BOTH.,#287835); +#287835 = SURFACE_SIDE_STYLE('',(#287836)); +#287836 = SURFACE_STYLE_FILL_AREA(#287837); +#287837 = FILL_AREA_STYLE('',(#287838)); +#287838 = FILL_AREA_STYLE_COLOUR('',#280691); +#287839 = CURVE_STYLE('',#287840,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287841 = STYLED_ITEM('color',(#287842),#119723); +#287842 = PRESENTATION_STYLE_ASSIGNMENT((#287843,#287848)); +#287843 = SURFACE_STYLE_USAGE(.BOTH.,#287844); +#287844 = SURFACE_SIDE_STYLE('',(#287845)); +#287845 = SURFACE_STYLE_FILL_AREA(#287846); +#287846 = FILL_AREA_STYLE('',(#287847)); +#287847 = FILL_AREA_STYLE_COLOUR('',#279624); +#287848 = CURVE_STYLE('',#287849,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287850 = STYLED_ITEM('color',(#287851),#119747); +#287851 = PRESENTATION_STYLE_ASSIGNMENT((#287852,#287857)); +#287852 = SURFACE_STYLE_USAGE(.BOTH.,#287853); +#287853 = SURFACE_SIDE_STYLE('',(#287854)); +#287854 = SURFACE_STYLE_FILL_AREA(#287855); +#287855 = FILL_AREA_STYLE('',(#287856)); +#287856 = FILL_AREA_STYLE_COLOUR('',#279624); +#287857 = CURVE_STYLE('',#287858,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287859 = OVER_RIDING_STYLED_ITEM('overriding color',(#287860),#119761, + #287850); +#287860 = PRESENTATION_STYLE_ASSIGNMENT((#287861,#287866)); +#287861 = SURFACE_STYLE_USAGE(.BOTH.,#287862); +#287862 = SURFACE_SIDE_STYLE('',(#287863)); +#287863 = SURFACE_STYLE_FILL_AREA(#287864); +#287864 = FILL_AREA_STYLE('',(#287865)); +#287865 = FILL_AREA_STYLE_COLOUR('',#280691); +#287866 = CURVE_STYLE('',#287867,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287868 = OVER_RIDING_STYLED_ITEM('overriding color',(#287869),#119777, + #287850); +#287869 = PRESENTATION_STYLE_ASSIGNMENT((#287870,#287875)); +#287870 = SURFACE_STYLE_USAGE(.BOTH.,#287871); +#287871 = SURFACE_SIDE_STYLE('',(#287872)); +#287872 = SURFACE_STYLE_FILL_AREA(#287873); +#287873 = FILL_AREA_STYLE('',(#287874)); +#287874 = FILL_AREA_STYLE_COLOUR('',#280691); +#287875 = CURVE_STYLE('',#287876,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287877 = STYLED_ITEM('color',(#287878),#119796); +#287878 = PRESENTATION_STYLE_ASSIGNMENT((#287879,#287884)); +#287879 = SURFACE_STYLE_USAGE(.BOTH.,#287880); +#287880 = SURFACE_SIDE_STYLE('',(#287881)); +#287881 = SURFACE_STYLE_FILL_AREA(#287882); +#287882 = FILL_AREA_STYLE('',(#287883)); +#287883 = FILL_AREA_STYLE_COLOUR('',#279624); +#287884 = CURVE_STYLE('',#287885,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287886 = STYLED_ITEM('color',(#287887),#119827); +#287887 = PRESENTATION_STYLE_ASSIGNMENT((#287888,#287893)); +#287888 = SURFACE_STYLE_USAGE(.BOTH.,#287889); +#287889 = SURFACE_SIDE_STYLE('',(#287890)); +#287890 = SURFACE_STYLE_FILL_AREA(#287891); +#287891 = FILL_AREA_STYLE('',(#287892)); +#287892 = FILL_AREA_STYLE_COLOUR('',#279624); +#287893 = CURVE_STYLE('',#287894,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287895 = OVER_RIDING_STYLED_ITEM('overriding color',(#287896),#119841, + #287886); +#287896 = PRESENTATION_STYLE_ASSIGNMENT((#287897,#287902)); +#287897 = SURFACE_STYLE_USAGE(.BOTH.,#287898); +#287898 = SURFACE_SIDE_STYLE('',(#287899)); +#287899 = SURFACE_STYLE_FILL_AREA(#287900); +#287900 = FILL_AREA_STYLE('',(#287901)); +#287901 = FILL_AREA_STYLE_COLOUR('',#280691); +#287902 = CURVE_STYLE('',#287903,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287904 = OVER_RIDING_STYLED_ITEM('overriding color',(#287905),#119857, + #287886); +#287905 = PRESENTATION_STYLE_ASSIGNMENT((#287906,#287911)); +#287906 = SURFACE_STYLE_USAGE(.BOTH.,#287907); +#287907 = SURFACE_SIDE_STYLE('',(#287908)); +#287908 = SURFACE_STYLE_FILL_AREA(#287909); +#287909 = FILL_AREA_STYLE('',(#287910)); +#287910 = FILL_AREA_STYLE_COLOUR('',#280691); +#287911 = CURVE_STYLE('',#287912,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287913 = STYLED_ITEM('color',(#287914),#119883); +#287914 = PRESENTATION_STYLE_ASSIGNMENT((#287915,#287920)); +#287915 = SURFACE_STYLE_USAGE(.BOTH.,#287916); +#287916 = SURFACE_SIDE_STYLE('',(#287917)); +#287917 = SURFACE_STYLE_FILL_AREA(#287918); +#287918 = FILL_AREA_STYLE('',(#287919)); +#287919 = FILL_AREA_STYLE_COLOUR('',#279624); +#287920 = CURVE_STYLE('',#287921,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287922 = STYLED_ITEM('color',(#287923),#119907); +#287923 = PRESENTATION_STYLE_ASSIGNMENT((#287924,#287929)); +#287924 = SURFACE_STYLE_USAGE(.BOTH.,#287925); +#287925 = SURFACE_SIDE_STYLE('',(#287926)); +#287926 = SURFACE_STYLE_FILL_AREA(#287927); +#287927 = FILL_AREA_STYLE('',(#287928)); +#287928 = FILL_AREA_STYLE_COLOUR('',#279624); +#287929 = CURVE_STYLE('',#287930,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287931 = OVER_RIDING_STYLED_ITEM('overriding color',(#287932),#119921, + #287922); +#287932 = PRESENTATION_STYLE_ASSIGNMENT((#287933,#287938)); +#287933 = SURFACE_STYLE_USAGE(.BOTH.,#287934); +#287934 = SURFACE_SIDE_STYLE('',(#287935)); +#287935 = SURFACE_STYLE_FILL_AREA(#287936); +#287936 = FILL_AREA_STYLE('',(#287937)); +#287937 = FILL_AREA_STYLE_COLOUR('',#280691); +#287938 = CURVE_STYLE('',#287939,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287940 = OVER_RIDING_STYLED_ITEM('overriding color',(#287941),#119937, + #287922); +#287941 = PRESENTATION_STYLE_ASSIGNMENT((#287942,#287947)); +#287942 = SURFACE_STYLE_USAGE(.BOTH.,#287943); +#287943 = SURFACE_SIDE_STYLE('',(#287944)); +#287944 = SURFACE_STYLE_FILL_AREA(#287945); +#287945 = FILL_AREA_STYLE('',(#287946)); +#287946 = FILL_AREA_STYLE_COLOUR('',#280691); +#287947 = CURVE_STYLE('',#287948,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287949 = STYLED_ITEM('color',(#287950),#119956); +#287950 = PRESENTATION_STYLE_ASSIGNMENT((#287951,#287956)); +#287951 = SURFACE_STYLE_USAGE(.BOTH.,#287952); +#287952 = SURFACE_SIDE_STYLE('',(#287953)); +#287953 = SURFACE_STYLE_FILL_AREA(#287954); +#287954 = FILL_AREA_STYLE('',(#287955)); +#287955 = FILL_AREA_STYLE_COLOUR('',#279624); +#287956 = CURVE_STYLE('',#287957,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287958 = STYLED_ITEM('color',(#287959),#119987); +#287959 = PRESENTATION_STYLE_ASSIGNMENT((#287960,#287965)); +#287960 = SURFACE_STYLE_USAGE(.BOTH.,#287961); +#287961 = SURFACE_SIDE_STYLE('',(#287962)); +#287962 = SURFACE_STYLE_FILL_AREA(#287963); +#287963 = FILL_AREA_STYLE('',(#287964)); +#287964 = FILL_AREA_STYLE_COLOUR('',#279624); +#287965 = CURVE_STYLE('',#287966,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287967 = OVER_RIDING_STYLED_ITEM('overriding color',(#287968),#120001, + #287958); +#287968 = PRESENTATION_STYLE_ASSIGNMENT((#287969,#287974)); +#287969 = SURFACE_STYLE_USAGE(.BOTH.,#287970); +#287970 = SURFACE_SIDE_STYLE('',(#287971)); +#287971 = SURFACE_STYLE_FILL_AREA(#287972); +#287972 = FILL_AREA_STYLE('',(#287973)); +#287973 = FILL_AREA_STYLE_COLOUR('',#280691); +#287974 = CURVE_STYLE('',#287975,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287976 = OVER_RIDING_STYLED_ITEM('overriding color',(#287977),#120017, + #287958); +#287977 = PRESENTATION_STYLE_ASSIGNMENT((#287978,#287983)); +#287978 = SURFACE_STYLE_USAGE(.BOTH.,#287979); +#287979 = SURFACE_SIDE_STYLE('',(#287980)); +#287980 = SURFACE_STYLE_FILL_AREA(#287981); +#287981 = FILL_AREA_STYLE('',(#287982)); +#287982 = FILL_AREA_STYLE_COLOUR('',#280691); +#287983 = CURVE_STYLE('',#287984,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#287984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287985 = STYLED_ITEM('color',(#287986),#120043); +#287986 = PRESENTATION_STYLE_ASSIGNMENT((#287987,#287992)); +#287987 = SURFACE_STYLE_USAGE(.BOTH.,#287988); +#287988 = SURFACE_SIDE_STYLE('',(#287989)); +#287989 = SURFACE_STYLE_FILL_AREA(#287990); +#287990 = FILL_AREA_STYLE('',(#287991)); +#287991 = FILL_AREA_STYLE_COLOUR('',#279624); +#287992 = CURVE_STYLE('',#287993,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#287993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287994 = STYLED_ITEM('color',(#287995),#120067); +#287995 = PRESENTATION_STYLE_ASSIGNMENT((#287996,#288001)); +#287996 = SURFACE_STYLE_USAGE(.BOTH.,#287997); +#287997 = SURFACE_SIDE_STYLE('',(#287998)); +#287998 = SURFACE_STYLE_FILL_AREA(#287999); +#287999 = FILL_AREA_STYLE('',(#288000)); +#288000 = FILL_AREA_STYLE_COLOUR('',#279624); +#288001 = CURVE_STYLE('',#288002,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288003 = OVER_RIDING_STYLED_ITEM('overriding color',(#288004),#120081, + #287994); +#288004 = PRESENTATION_STYLE_ASSIGNMENT((#288005,#288010)); +#288005 = SURFACE_STYLE_USAGE(.BOTH.,#288006); +#288006 = SURFACE_SIDE_STYLE('',(#288007)); +#288007 = SURFACE_STYLE_FILL_AREA(#288008); +#288008 = FILL_AREA_STYLE('',(#288009)); +#288009 = FILL_AREA_STYLE_COLOUR('',#280691); +#288010 = CURVE_STYLE('',#288011,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288012 = OVER_RIDING_STYLED_ITEM('overriding color',(#288013),#120097, + #287994); +#288013 = PRESENTATION_STYLE_ASSIGNMENT((#288014,#288019)); +#288014 = SURFACE_STYLE_USAGE(.BOTH.,#288015); +#288015 = SURFACE_SIDE_STYLE('',(#288016)); +#288016 = SURFACE_STYLE_FILL_AREA(#288017); +#288017 = FILL_AREA_STYLE('',(#288018)); +#288018 = FILL_AREA_STYLE_COLOUR('',#280691); +#288019 = CURVE_STYLE('',#288020,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288021 = STYLED_ITEM('color',(#288022),#120116); +#288022 = PRESENTATION_STYLE_ASSIGNMENT((#288023,#288028)); +#288023 = SURFACE_STYLE_USAGE(.BOTH.,#288024); +#288024 = SURFACE_SIDE_STYLE('',(#288025)); +#288025 = SURFACE_STYLE_FILL_AREA(#288026); +#288026 = FILL_AREA_STYLE('',(#288027)); +#288027 = FILL_AREA_STYLE_COLOUR('',#280691); +#288028 = CURVE_STYLE('',#288029,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288030 = STYLED_ITEM('color',(#288031),#120133); +#288031 = PRESENTATION_STYLE_ASSIGNMENT((#288032,#288037)); +#288032 = SURFACE_STYLE_USAGE(.BOTH.,#288033); +#288033 = SURFACE_SIDE_STYLE('',(#288034)); +#288034 = SURFACE_STYLE_FILL_AREA(#288035); +#288035 = FILL_AREA_STYLE('',(#288036)); +#288036 = FILL_AREA_STYLE_COLOUR('',#280691); +#288037 = CURVE_STYLE('',#288038,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288039 = STYLED_ITEM('color',(#288040),#120150); +#288040 = PRESENTATION_STYLE_ASSIGNMENT((#288041,#288046)); +#288041 = SURFACE_STYLE_USAGE(.BOTH.,#288042); +#288042 = SURFACE_SIDE_STYLE('',(#288043)); +#288043 = SURFACE_STYLE_FILL_AREA(#288044); +#288044 = FILL_AREA_STYLE('',(#288045)); +#288045 = FILL_AREA_STYLE_COLOUR('',#280691); +#288046 = CURVE_STYLE('',#288047,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288048 = STYLED_ITEM('color',(#288049),#120167); +#288049 = PRESENTATION_STYLE_ASSIGNMENT((#288050,#288055)); +#288050 = SURFACE_STYLE_USAGE(.BOTH.,#288051); +#288051 = SURFACE_SIDE_STYLE('',(#288052)); +#288052 = SURFACE_STYLE_FILL_AREA(#288053); +#288053 = FILL_AREA_STYLE('',(#288054)); +#288054 = FILL_AREA_STYLE_COLOUR('',#280691); +#288055 = CURVE_STYLE('',#288056,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288057 = STYLED_ITEM('color',(#288058),#120184); +#288058 = PRESENTATION_STYLE_ASSIGNMENT((#288059,#288064)); +#288059 = SURFACE_STYLE_USAGE(.BOTH.,#288060); +#288060 = SURFACE_SIDE_STYLE('',(#288061)); +#288061 = SURFACE_STYLE_FILL_AREA(#288062); +#288062 = FILL_AREA_STYLE('',(#288063)); +#288063 = FILL_AREA_STYLE_COLOUR('',#280691); +#288064 = CURVE_STYLE('',#288065,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288066 = STYLED_ITEM('color',(#288067),#120196); +#288067 = PRESENTATION_STYLE_ASSIGNMENT((#288068,#288073)); +#288068 = SURFACE_STYLE_USAGE(.BOTH.,#288069); +#288069 = SURFACE_SIDE_STYLE('',(#288070)); +#288070 = SURFACE_STYLE_FILL_AREA(#288071); +#288071 = FILL_AREA_STYLE('',(#288072)); +#288072 = FILL_AREA_STYLE_COLOUR('',#280691); +#288073 = CURVE_STYLE('',#288074,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288075 = STYLED_ITEM('color',(#288076),#120213); +#288076 = PRESENTATION_STYLE_ASSIGNMENT((#288077,#288082)); +#288077 = SURFACE_STYLE_USAGE(.BOTH.,#288078); +#288078 = SURFACE_SIDE_STYLE('',(#288079)); +#288079 = SURFACE_STYLE_FILL_AREA(#288080); +#288080 = FILL_AREA_STYLE('',(#288081)); +#288081 = FILL_AREA_STYLE_COLOUR('',#280691); +#288082 = CURVE_STYLE('',#288083,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288084 = STYLED_ITEM('color',(#288085),#120230); +#288085 = PRESENTATION_STYLE_ASSIGNMENT((#288086,#288091)); +#288086 = SURFACE_STYLE_USAGE(.BOTH.,#288087); +#288087 = SURFACE_SIDE_STYLE('',(#288088)); +#288088 = SURFACE_STYLE_FILL_AREA(#288089); +#288089 = FILL_AREA_STYLE('',(#288090)); +#288090 = FILL_AREA_STYLE_COLOUR('',#280691); +#288091 = CURVE_STYLE('',#288092,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288093 = STYLED_ITEM('color',(#288094),#120247); +#288094 = PRESENTATION_STYLE_ASSIGNMENT((#288095,#288100)); +#288095 = SURFACE_STYLE_USAGE(.BOTH.,#288096); +#288096 = SURFACE_SIDE_STYLE('',(#288097)); +#288097 = SURFACE_STYLE_FILL_AREA(#288098); +#288098 = FILL_AREA_STYLE('',(#288099)); +#288099 = FILL_AREA_STYLE_COLOUR('',#280691); +#288100 = CURVE_STYLE('',#288101,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288102 = STYLED_ITEM('color',(#288103),#120264); +#288103 = PRESENTATION_STYLE_ASSIGNMENT((#288104,#288109)); +#288104 = SURFACE_STYLE_USAGE(.BOTH.,#288105); +#288105 = SURFACE_SIDE_STYLE('',(#288106)); +#288106 = SURFACE_STYLE_FILL_AREA(#288107); +#288107 = FILL_AREA_STYLE('',(#288108)); +#288108 = FILL_AREA_STYLE_COLOUR('',#280691); +#288109 = CURVE_STYLE('',#288110,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288111 = STYLED_ITEM('color',(#288112),#120276); +#288112 = PRESENTATION_STYLE_ASSIGNMENT((#288113,#288118)); +#288113 = SURFACE_STYLE_USAGE(.BOTH.,#288114); +#288114 = SURFACE_SIDE_STYLE('',(#288115)); +#288115 = SURFACE_STYLE_FILL_AREA(#288116); +#288116 = FILL_AREA_STYLE('',(#288117)); +#288117 = FILL_AREA_STYLE_COLOUR('',#280691); +#288118 = CURVE_STYLE('',#288119,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288120 = STYLED_ITEM('color',(#288121),#120293); +#288121 = PRESENTATION_STYLE_ASSIGNMENT((#288122,#288127)); +#288122 = SURFACE_STYLE_USAGE(.BOTH.,#288123); +#288123 = SURFACE_SIDE_STYLE('',(#288124)); +#288124 = SURFACE_STYLE_FILL_AREA(#288125); +#288125 = FILL_AREA_STYLE('',(#288126)); +#288126 = FILL_AREA_STYLE_COLOUR('',#280691); +#288127 = CURVE_STYLE('',#288128,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288129 = STYLED_ITEM('color',(#288130),#120310); +#288130 = PRESENTATION_STYLE_ASSIGNMENT((#288131,#288136)); +#288131 = SURFACE_STYLE_USAGE(.BOTH.,#288132); +#288132 = SURFACE_SIDE_STYLE('',(#288133)); +#288133 = SURFACE_STYLE_FILL_AREA(#288134); +#288134 = FILL_AREA_STYLE('',(#288135)); +#288135 = FILL_AREA_STYLE_COLOUR('',#280691); +#288136 = CURVE_STYLE('',#288137,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288138 = STYLED_ITEM('color',(#288139),#120327); +#288139 = PRESENTATION_STYLE_ASSIGNMENT((#288140,#288145)); +#288140 = SURFACE_STYLE_USAGE(.BOTH.,#288141); +#288141 = SURFACE_SIDE_STYLE('',(#288142)); +#288142 = SURFACE_STYLE_FILL_AREA(#288143); +#288143 = FILL_AREA_STYLE('',(#288144)); +#288144 = FILL_AREA_STYLE_COLOUR('',#280691); +#288145 = CURVE_STYLE('',#288146,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288147 = STYLED_ITEM('color',(#288148),#120344); +#288148 = PRESENTATION_STYLE_ASSIGNMENT((#288149,#288154)); +#288149 = SURFACE_STYLE_USAGE(.BOTH.,#288150); +#288150 = SURFACE_SIDE_STYLE('',(#288151)); +#288151 = SURFACE_STYLE_FILL_AREA(#288152); +#288152 = FILL_AREA_STYLE('',(#288153)); +#288153 = FILL_AREA_STYLE_COLOUR('',#280691); +#288154 = CURVE_STYLE('',#288155,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288156 = STYLED_ITEM('color',(#288157),#120356); +#288157 = PRESENTATION_STYLE_ASSIGNMENT((#288158,#288163)); +#288158 = SURFACE_STYLE_USAGE(.BOTH.,#288159); +#288159 = SURFACE_SIDE_STYLE('',(#288160)); +#288160 = SURFACE_STYLE_FILL_AREA(#288161); +#288161 = FILL_AREA_STYLE('',(#288162)); +#288162 = FILL_AREA_STYLE_COLOUR('',#280691); +#288163 = CURVE_STYLE('',#288164,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288165 = STYLED_ITEM('color',(#288166),#120373); +#288166 = PRESENTATION_STYLE_ASSIGNMENT((#288167,#288172)); +#288167 = SURFACE_STYLE_USAGE(.BOTH.,#288168); +#288168 = SURFACE_SIDE_STYLE('',(#288169)); +#288169 = SURFACE_STYLE_FILL_AREA(#288170); +#288170 = FILL_AREA_STYLE('',(#288171)); +#288171 = FILL_AREA_STYLE_COLOUR('',#280691); +#288172 = CURVE_STYLE('',#288173,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288174 = STYLED_ITEM('color',(#288175),#120390); +#288175 = PRESENTATION_STYLE_ASSIGNMENT((#288176,#288181)); +#288176 = SURFACE_STYLE_USAGE(.BOTH.,#288177); +#288177 = SURFACE_SIDE_STYLE('',(#288178)); +#288178 = SURFACE_STYLE_FILL_AREA(#288179); +#288179 = FILL_AREA_STYLE('',(#288180)); +#288180 = FILL_AREA_STYLE_COLOUR('',#280691); +#288181 = CURVE_STYLE('',#288182,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288183 = STYLED_ITEM('color',(#288184),#120407); +#288184 = PRESENTATION_STYLE_ASSIGNMENT((#288185,#288190)); +#288185 = SURFACE_STYLE_USAGE(.BOTH.,#288186); +#288186 = SURFACE_SIDE_STYLE('',(#288187)); +#288187 = SURFACE_STYLE_FILL_AREA(#288188); +#288188 = FILL_AREA_STYLE('',(#288189)); +#288189 = FILL_AREA_STYLE_COLOUR('',#280691); +#288190 = CURVE_STYLE('',#288191,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288192 = STYLED_ITEM('color',(#288193),#120424); +#288193 = PRESENTATION_STYLE_ASSIGNMENT((#288194,#288199)); +#288194 = SURFACE_STYLE_USAGE(.BOTH.,#288195); +#288195 = SURFACE_SIDE_STYLE('',(#288196)); +#288196 = SURFACE_STYLE_FILL_AREA(#288197); +#288197 = FILL_AREA_STYLE('',(#288198)); +#288198 = FILL_AREA_STYLE_COLOUR('',#280691); +#288199 = CURVE_STYLE('',#288200,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288201 = STYLED_ITEM('color',(#288202),#120436); +#288202 = PRESENTATION_STYLE_ASSIGNMENT((#288203,#288208)); +#288203 = SURFACE_STYLE_USAGE(.BOTH.,#288204); +#288204 = SURFACE_SIDE_STYLE('',(#288205)); +#288205 = SURFACE_STYLE_FILL_AREA(#288206); +#288206 = FILL_AREA_STYLE('',(#288207)); +#288207 = FILL_AREA_STYLE_COLOUR('',#280691); +#288208 = CURVE_STYLE('',#288209,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288210 = STYLED_ITEM('color',(#288211),#120453); +#288211 = PRESENTATION_STYLE_ASSIGNMENT((#288212,#288217)); +#288212 = SURFACE_STYLE_USAGE(.BOTH.,#288213); +#288213 = SURFACE_SIDE_STYLE('',(#288214)); +#288214 = SURFACE_STYLE_FILL_AREA(#288215); +#288215 = FILL_AREA_STYLE('',(#288216)); +#288216 = FILL_AREA_STYLE_COLOUR('',#280691); +#288217 = CURVE_STYLE('',#288218,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288219 = STYLED_ITEM('color',(#288220),#120470); +#288220 = PRESENTATION_STYLE_ASSIGNMENT((#288221,#288226)); +#288221 = SURFACE_STYLE_USAGE(.BOTH.,#288222); +#288222 = SURFACE_SIDE_STYLE('',(#288223)); +#288223 = SURFACE_STYLE_FILL_AREA(#288224); +#288224 = FILL_AREA_STYLE('',(#288225)); +#288225 = FILL_AREA_STYLE_COLOUR('',#280691); +#288226 = CURVE_STYLE('',#288227,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288228 = STYLED_ITEM('color',(#288229),#120487); +#288229 = PRESENTATION_STYLE_ASSIGNMENT((#288230,#288235)); +#288230 = SURFACE_STYLE_USAGE(.BOTH.,#288231); +#288231 = SURFACE_SIDE_STYLE('',(#288232)); +#288232 = SURFACE_STYLE_FILL_AREA(#288233); +#288233 = FILL_AREA_STYLE('',(#288234)); +#288234 = FILL_AREA_STYLE_COLOUR('',#280691); +#288235 = CURVE_STYLE('',#288236,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288237 = STYLED_ITEM('color',(#288238),#120504); +#288238 = PRESENTATION_STYLE_ASSIGNMENT((#288239,#288244)); +#288239 = SURFACE_STYLE_USAGE(.BOTH.,#288240); +#288240 = SURFACE_SIDE_STYLE('',(#288241)); +#288241 = SURFACE_STYLE_FILL_AREA(#288242); +#288242 = FILL_AREA_STYLE('',(#288243)); +#288243 = FILL_AREA_STYLE_COLOUR('',#280691); +#288244 = CURVE_STYLE('',#288245,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288246 = STYLED_ITEM('color',(#288247),#120516); +#288247 = PRESENTATION_STYLE_ASSIGNMENT((#288248,#288253)); +#288248 = SURFACE_STYLE_USAGE(.BOTH.,#288249); +#288249 = SURFACE_SIDE_STYLE('',(#288250)); +#288250 = SURFACE_STYLE_FILL_AREA(#288251); +#288251 = FILL_AREA_STYLE('',(#288252)); +#288252 = FILL_AREA_STYLE_COLOUR('',#280691); +#288253 = CURVE_STYLE('',#288254,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288255 = STYLED_ITEM('color',(#288256),#120533); +#288256 = PRESENTATION_STYLE_ASSIGNMENT((#288257,#288262)); +#288257 = SURFACE_STYLE_USAGE(.BOTH.,#288258); +#288258 = SURFACE_SIDE_STYLE('',(#288259)); +#288259 = SURFACE_STYLE_FILL_AREA(#288260); +#288260 = FILL_AREA_STYLE('',(#288261)); +#288261 = FILL_AREA_STYLE_COLOUR('',#280691); +#288262 = CURVE_STYLE('',#288263,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288264 = STYLED_ITEM('color',(#288265),#120550); +#288265 = PRESENTATION_STYLE_ASSIGNMENT((#288266,#288271)); +#288266 = SURFACE_STYLE_USAGE(.BOTH.,#288267); +#288267 = SURFACE_SIDE_STYLE('',(#288268)); +#288268 = SURFACE_STYLE_FILL_AREA(#288269); +#288269 = FILL_AREA_STYLE('',(#288270)); +#288270 = FILL_AREA_STYLE_COLOUR('',#280691); +#288271 = CURVE_STYLE('',#288272,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288273 = STYLED_ITEM('color',(#288274),#120567); +#288274 = PRESENTATION_STYLE_ASSIGNMENT((#288275,#288280)); +#288275 = SURFACE_STYLE_USAGE(.BOTH.,#288276); +#288276 = SURFACE_SIDE_STYLE('',(#288277)); +#288277 = SURFACE_STYLE_FILL_AREA(#288278); +#288278 = FILL_AREA_STYLE('',(#288279)); +#288279 = FILL_AREA_STYLE_COLOUR('',#280691); +#288280 = CURVE_STYLE('',#288281,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288282 = STYLED_ITEM('color',(#288283),#120584); +#288283 = PRESENTATION_STYLE_ASSIGNMENT((#288284,#288289)); +#288284 = SURFACE_STYLE_USAGE(.BOTH.,#288285); +#288285 = SURFACE_SIDE_STYLE('',(#288286)); +#288286 = SURFACE_STYLE_FILL_AREA(#288287); +#288287 = FILL_AREA_STYLE('',(#288288)); +#288288 = FILL_AREA_STYLE_COLOUR('',#280691); +#288289 = CURVE_STYLE('',#288290,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288291 = STYLED_ITEM('color',(#288292),#120596); +#288292 = PRESENTATION_STYLE_ASSIGNMENT((#288293,#288298)); +#288293 = SURFACE_STYLE_USAGE(.BOTH.,#288294); +#288294 = SURFACE_SIDE_STYLE('',(#288295)); +#288295 = SURFACE_STYLE_FILL_AREA(#288296); +#288296 = FILL_AREA_STYLE('',(#288297)); +#288297 = FILL_AREA_STYLE_COLOUR('',#280691); +#288298 = CURVE_STYLE('',#288299,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288300 = STYLED_ITEM('color',(#288301),#120613); +#288301 = PRESENTATION_STYLE_ASSIGNMENT((#288302,#288307)); +#288302 = SURFACE_STYLE_USAGE(.BOTH.,#288303); +#288303 = SURFACE_SIDE_STYLE('',(#288304)); +#288304 = SURFACE_STYLE_FILL_AREA(#288305); +#288305 = FILL_AREA_STYLE('',(#288306)); +#288306 = FILL_AREA_STYLE_COLOUR('',#280691); +#288307 = CURVE_STYLE('',#288308,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288309 = STYLED_ITEM('color',(#288310),#120630); +#288310 = PRESENTATION_STYLE_ASSIGNMENT((#288311,#288316)); +#288311 = SURFACE_STYLE_USAGE(.BOTH.,#288312); +#288312 = SURFACE_SIDE_STYLE('',(#288313)); +#288313 = SURFACE_STYLE_FILL_AREA(#288314); +#288314 = FILL_AREA_STYLE('',(#288315)); +#288315 = FILL_AREA_STYLE_COLOUR('',#280691); +#288316 = CURVE_STYLE('',#288317,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288318 = STYLED_ITEM('color',(#288319),#120647); +#288319 = PRESENTATION_STYLE_ASSIGNMENT((#288320,#288325)); +#288320 = SURFACE_STYLE_USAGE(.BOTH.,#288321); +#288321 = SURFACE_SIDE_STYLE('',(#288322)); +#288322 = SURFACE_STYLE_FILL_AREA(#288323); +#288323 = FILL_AREA_STYLE('',(#288324)); +#288324 = FILL_AREA_STYLE_COLOUR('',#280691); +#288325 = CURVE_STYLE('',#288326,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288327 = STYLED_ITEM('color',(#288328),#120664); +#288328 = PRESENTATION_STYLE_ASSIGNMENT((#288329,#288334)); +#288329 = SURFACE_STYLE_USAGE(.BOTH.,#288330); +#288330 = SURFACE_SIDE_STYLE('',(#288331)); +#288331 = SURFACE_STYLE_FILL_AREA(#288332); +#288332 = FILL_AREA_STYLE('',(#288333)); +#288333 = FILL_AREA_STYLE_COLOUR('',#280691); +#288334 = CURVE_STYLE('',#288335,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288336 = STYLED_ITEM('color',(#288337),#120676); +#288337 = PRESENTATION_STYLE_ASSIGNMENT((#288338,#288343)); +#288338 = SURFACE_STYLE_USAGE(.BOTH.,#288339); +#288339 = SURFACE_SIDE_STYLE('',(#288340)); +#288340 = SURFACE_STYLE_FILL_AREA(#288341); +#288341 = FILL_AREA_STYLE('',(#288342)); +#288342 = FILL_AREA_STYLE_COLOUR('',#280691); +#288343 = CURVE_STYLE('',#288344,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288345 = STYLED_ITEM('color',(#288346),#120693); +#288346 = PRESENTATION_STYLE_ASSIGNMENT((#288347,#288352)); +#288347 = SURFACE_STYLE_USAGE(.BOTH.,#288348); +#288348 = SURFACE_SIDE_STYLE('',(#288349)); +#288349 = SURFACE_STYLE_FILL_AREA(#288350); +#288350 = FILL_AREA_STYLE('',(#288351)); +#288351 = FILL_AREA_STYLE_COLOUR('',#280691); +#288352 = CURVE_STYLE('',#288353,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288354 = STYLED_ITEM('color',(#288355),#120710); +#288355 = PRESENTATION_STYLE_ASSIGNMENT((#288356,#288361)); +#288356 = SURFACE_STYLE_USAGE(.BOTH.,#288357); +#288357 = SURFACE_SIDE_STYLE('',(#288358)); +#288358 = SURFACE_STYLE_FILL_AREA(#288359); +#288359 = FILL_AREA_STYLE('',(#288360)); +#288360 = FILL_AREA_STYLE_COLOUR('',#280691); +#288361 = CURVE_STYLE('',#288362,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288363 = STYLED_ITEM('color',(#288364),#120727); +#288364 = PRESENTATION_STYLE_ASSIGNMENT((#288365,#288370)); +#288365 = SURFACE_STYLE_USAGE(.BOTH.,#288366); +#288366 = SURFACE_SIDE_STYLE('',(#288367)); +#288367 = SURFACE_STYLE_FILL_AREA(#288368); +#288368 = FILL_AREA_STYLE('',(#288369)); +#288369 = FILL_AREA_STYLE_COLOUR('',#280691); +#288370 = CURVE_STYLE('',#288371,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288372 = STYLED_ITEM('color',(#288373),#120744); +#288373 = PRESENTATION_STYLE_ASSIGNMENT((#288374,#288379)); +#288374 = SURFACE_STYLE_USAGE(.BOTH.,#288375); +#288375 = SURFACE_SIDE_STYLE('',(#288376)); +#288376 = SURFACE_STYLE_FILL_AREA(#288377); +#288377 = FILL_AREA_STYLE('',(#288378)); +#288378 = FILL_AREA_STYLE_COLOUR('',#280691); +#288379 = CURVE_STYLE('',#288380,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288381 = STYLED_ITEM('color',(#288382),#120756); +#288382 = PRESENTATION_STYLE_ASSIGNMENT((#288383,#288388)); +#288383 = SURFACE_STYLE_USAGE(.BOTH.,#288384); +#288384 = SURFACE_SIDE_STYLE('',(#288385)); +#288385 = SURFACE_STYLE_FILL_AREA(#288386); +#288386 = FILL_AREA_STYLE('',(#288387)); +#288387 = FILL_AREA_STYLE_COLOUR('',#280691); +#288388 = CURVE_STYLE('',#288389,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288390 = STYLED_ITEM('color',(#288391),#120773); +#288391 = PRESENTATION_STYLE_ASSIGNMENT((#288392,#288397)); +#288392 = SURFACE_STYLE_USAGE(.BOTH.,#288393); +#288393 = SURFACE_SIDE_STYLE('',(#288394)); +#288394 = SURFACE_STYLE_FILL_AREA(#288395); +#288395 = FILL_AREA_STYLE('',(#288396)); +#288396 = FILL_AREA_STYLE_COLOUR('',#280691); +#288397 = CURVE_STYLE('',#288398,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288399 = STYLED_ITEM('color',(#288400),#120790); +#288400 = PRESENTATION_STYLE_ASSIGNMENT((#288401,#288406)); +#288401 = SURFACE_STYLE_USAGE(.BOTH.,#288402); +#288402 = SURFACE_SIDE_STYLE('',(#288403)); +#288403 = SURFACE_STYLE_FILL_AREA(#288404); +#288404 = FILL_AREA_STYLE('',(#288405)); +#288405 = FILL_AREA_STYLE_COLOUR('',#280691); +#288406 = CURVE_STYLE('',#288407,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288408 = STYLED_ITEM('color',(#288409),#120807); +#288409 = PRESENTATION_STYLE_ASSIGNMENT((#288410,#288415)); +#288410 = SURFACE_STYLE_USAGE(.BOTH.,#288411); +#288411 = SURFACE_SIDE_STYLE('',(#288412)); +#288412 = SURFACE_STYLE_FILL_AREA(#288413); +#288413 = FILL_AREA_STYLE('',(#288414)); +#288414 = FILL_AREA_STYLE_COLOUR('',#280691); +#288415 = CURVE_STYLE('',#288416,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288417 = STYLED_ITEM('color',(#288418),#120824); +#288418 = PRESENTATION_STYLE_ASSIGNMENT((#288419,#288424)); +#288419 = SURFACE_STYLE_USAGE(.BOTH.,#288420); +#288420 = SURFACE_SIDE_STYLE('',(#288421)); +#288421 = SURFACE_STYLE_FILL_AREA(#288422); +#288422 = FILL_AREA_STYLE('',(#288423)); +#288423 = FILL_AREA_STYLE_COLOUR('',#280691); +#288424 = CURVE_STYLE('',#288425,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288426 = STYLED_ITEM('color',(#288427),#120836); +#288427 = PRESENTATION_STYLE_ASSIGNMENT((#288428,#288433)); +#288428 = SURFACE_STYLE_USAGE(.BOTH.,#288429); +#288429 = SURFACE_SIDE_STYLE('',(#288430)); +#288430 = SURFACE_STYLE_FILL_AREA(#288431); +#288431 = FILL_AREA_STYLE('',(#288432)); +#288432 = FILL_AREA_STYLE_COLOUR('',#280691); +#288433 = CURVE_STYLE('',#288434,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288435 = STYLED_ITEM('color',(#288436),#120853); +#288436 = PRESENTATION_STYLE_ASSIGNMENT((#288437,#288442)); +#288437 = SURFACE_STYLE_USAGE(.BOTH.,#288438); +#288438 = SURFACE_SIDE_STYLE('',(#288439)); +#288439 = SURFACE_STYLE_FILL_AREA(#288440); +#288440 = FILL_AREA_STYLE('',(#288441)); +#288441 = FILL_AREA_STYLE_COLOUR('',#280691); +#288442 = CURVE_STYLE('',#288443,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288444 = STYLED_ITEM('color',(#288445),#120870); +#288445 = PRESENTATION_STYLE_ASSIGNMENT((#288446,#288451)); +#288446 = SURFACE_STYLE_USAGE(.BOTH.,#288447); +#288447 = SURFACE_SIDE_STYLE('',(#288448)); +#288448 = SURFACE_STYLE_FILL_AREA(#288449); +#288449 = FILL_AREA_STYLE('',(#288450)); +#288450 = FILL_AREA_STYLE_COLOUR('',#280691); +#288451 = CURVE_STYLE('',#288452,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288453 = STYLED_ITEM('color',(#288454),#120887); +#288454 = PRESENTATION_STYLE_ASSIGNMENT((#288455,#288460)); +#288455 = SURFACE_STYLE_USAGE(.BOTH.,#288456); +#288456 = SURFACE_SIDE_STYLE('',(#288457)); +#288457 = SURFACE_STYLE_FILL_AREA(#288458); +#288458 = FILL_AREA_STYLE('',(#288459)); +#288459 = FILL_AREA_STYLE_COLOUR('',#280691); +#288460 = CURVE_STYLE('',#288461,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288462 = STYLED_ITEM('color',(#288463),#120904); +#288463 = PRESENTATION_STYLE_ASSIGNMENT((#288464,#288469)); +#288464 = SURFACE_STYLE_USAGE(.BOTH.,#288465); +#288465 = SURFACE_SIDE_STYLE('',(#288466)); +#288466 = SURFACE_STYLE_FILL_AREA(#288467); +#288467 = FILL_AREA_STYLE('',(#288468)); +#288468 = FILL_AREA_STYLE_COLOUR('',#280691); +#288469 = CURVE_STYLE('',#288470,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288471 = STYLED_ITEM('color',(#288472),#120916); +#288472 = PRESENTATION_STYLE_ASSIGNMENT((#288473,#288478)); +#288473 = SURFACE_STYLE_USAGE(.BOTH.,#288474); +#288474 = SURFACE_SIDE_STYLE('',(#288475)); +#288475 = SURFACE_STYLE_FILL_AREA(#288476); +#288476 = FILL_AREA_STYLE('',(#288477)); +#288477 = FILL_AREA_STYLE_COLOUR('',#279624); +#288478 = CURVE_STYLE('',#288479,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288480 = OVER_RIDING_STYLED_ITEM('overriding color',(#288481),#120923, + #288471); +#288481 = PRESENTATION_STYLE_ASSIGNMENT((#288482,#288487)); +#288482 = SURFACE_STYLE_USAGE(.BOTH.,#288483); +#288483 = SURFACE_SIDE_STYLE('',(#288484)); +#288484 = SURFACE_STYLE_FILL_AREA(#288485); +#288485 = FILL_AREA_STYLE('',(#288486)); +#288486 = FILL_AREA_STYLE_COLOUR('',#280691); +#288487 = CURVE_STYLE('',#288488,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288489 = STYLED_ITEM('color',(#288490),#120933); +#288490 = PRESENTATION_STYLE_ASSIGNMENT((#288491,#288496)); +#288491 = SURFACE_STYLE_USAGE(.BOTH.,#288492); +#288492 = SURFACE_SIDE_STYLE('',(#288493)); +#288493 = SURFACE_STYLE_FILL_AREA(#288494); +#288494 = FILL_AREA_STYLE('',(#288495)); +#288495 = FILL_AREA_STYLE_COLOUR('',#279624); +#288496 = CURVE_STYLE('',#288497,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288498 = OVER_RIDING_STYLED_ITEM('overriding color',(#288499),#120938, + #288489); +#288499 = PRESENTATION_STYLE_ASSIGNMENT((#288500,#288505)); +#288500 = SURFACE_STYLE_USAGE(.BOTH.,#288501); +#288501 = SURFACE_SIDE_STYLE('',(#288502)); +#288502 = SURFACE_STYLE_FILL_AREA(#288503); +#288503 = FILL_AREA_STYLE('',(#288504)); +#288504 = FILL_AREA_STYLE_COLOUR('',#280691); +#288505 = CURVE_STYLE('',#288506,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288507 = STYLED_ITEM('color',(#288508),#120950); +#288508 = PRESENTATION_STYLE_ASSIGNMENT((#288509,#288514)); +#288509 = SURFACE_STYLE_USAGE(.BOTH.,#288510); +#288510 = SURFACE_SIDE_STYLE('',(#288511)); +#288511 = SURFACE_STYLE_FILL_AREA(#288512); +#288512 = FILL_AREA_STYLE('',(#288513)); +#288513 = FILL_AREA_STYLE_COLOUR('',#280691); +#288514 = CURVE_STYLE('',#288515,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288516 = STYLED_ITEM('color',(#288517),#120999); +#288517 = PRESENTATION_STYLE_ASSIGNMENT((#288518,#288523)); +#288518 = SURFACE_STYLE_USAGE(.BOTH.,#288519); +#288519 = SURFACE_SIDE_STYLE('',(#288520)); +#288520 = SURFACE_STYLE_FILL_AREA(#288521); +#288521 = FILL_AREA_STYLE('',(#288522)); +#288522 = FILL_AREA_STYLE_COLOUR('',#280691); +#288523 = CURVE_STYLE('',#288524,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288525 = STYLED_ITEM('color',(#288526),#121023); +#288526 = PRESENTATION_STYLE_ASSIGNMENT((#288527,#288532)); +#288527 = SURFACE_STYLE_USAGE(.BOTH.,#288528); +#288528 = SURFACE_SIDE_STYLE('',(#288529)); +#288529 = SURFACE_STYLE_FILL_AREA(#288530); +#288530 = FILL_AREA_STYLE('',(#288531)); +#288531 = FILL_AREA_STYLE_COLOUR('',#280691); +#288532 = CURVE_STYLE('',#288533,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288534 = STYLED_ITEM('color',(#288535),#121065); +#288535 = PRESENTATION_STYLE_ASSIGNMENT((#288536,#288541)); +#288536 = SURFACE_STYLE_USAGE(.BOTH.,#288537); +#288537 = SURFACE_SIDE_STYLE('',(#288538)); +#288538 = SURFACE_STYLE_FILL_AREA(#288539); +#288539 = FILL_AREA_STYLE('',(#288540)); +#288540 = FILL_AREA_STYLE_COLOUR('',#280691); +#288541 = CURVE_STYLE('',#288542,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288543 = STYLED_ITEM('color',(#288544),#121082); +#288544 = PRESENTATION_STYLE_ASSIGNMENT((#288545,#288550)); +#288545 = SURFACE_STYLE_USAGE(.BOTH.,#288546); +#288546 = SURFACE_SIDE_STYLE('',(#288547)); +#288547 = SURFACE_STYLE_FILL_AREA(#288548); +#288548 = FILL_AREA_STYLE('',(#288549)); +#288549 = FILL_AREA_STYLE_COLOUR('',#279624); +#288550 = CURVE_STYLE('',#288551,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288552 = OVER_RIDING_STYLED_ITEM('overriding color',(#288553),#121089, + #288543); +#288553 = PRESENTATION_STYLE_ASSIGNMENT((#288554,#288559)); +#288554 = SURFACE_STYLE_USAGE(.BOTH.,#288555); +#288555 = SURFACE_SIDE_STYLE('',(#288556)); +#288556 = SURFACE_STYLE_FILL_AREA(#288557); +#288557 = FILL_AREA_STYLE('',(#288558)); +#288558 = FILL_AREA_STYLE_COLOUR('',#280691); +#288559 = CURVE_STYLE('',#288560,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288561 = STYLED_ITEM('color',(#288562),#121099); +#288562 = PRESENTATION_STYLE_ASSIGNMENT((#288563,#288568)); +#288563 = SURFACE_STYLE_USAGE(.BOTH.,#288564); +#288564 = SURFACE_SIDE_STYLE('',(#288565)); +#288565 = SURFACE_STYLE_FILL_AREA(#288566); +#288566 = FILL_AREA_STYLE('',(#288567)); +#288567 = FILL_AREA_STYLE_COLOUR('',#279624); +#288568 = CURVE_STYLE('',#288569,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288570 = OVER_RIDING_STYLED_ITEM('overriding color',(#288571),#121104, + #288561); +#288571 = PRESENTATION_STYLE_ASSIGNMENT((#288572,#288577)); +#288572 = SURFACE_STYLE_USAGE(.BOTH.,#288573); +#288573 = SURFACE_SIDE_STYLE('',(#288574)); +#288574 = SURFACE_STYLE_FILL_AREA(#288575); +#288575 = FILL_AREA_STYLE('',(#288576)); +#288576 = FILL_AREA_STYLE_COLOUR('',#280691); +#288577 = CURVE_STYLE('',#288578,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288579 = STYLED_ITEM('color',(#288580),#121116); +#288580 = PRESENTATION_STYLE_ASSIGNMENT((#288581,#288586)); +#288581 = SURFACE_STYLE_USAGE(.BOTH.,#288582); +#288582 = SURFACE_SIDE_STYLE('',(#288583)); +#288583 = SURFACE_STYLE_FILL_AREA(#288584); +#288584 = FILL_AREA_STYLE('',(#288585)); +#288585 = FILL_AREA_STYLE_COLOUR('',#280691); +#288586 = CURVE_STYLE('',#288587,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288588 = STYLED_ITEM('color',(#288589),#121165); +#288589 = PRESENTATION_STYLE_ASSIGNMENT((#288590,#288595)); +#288590 = SURFACE_STYLE_USAGE(.BOTH.,#288591); +#288591 = SURFACE_SIDE_STYLE('',(#288592)); +#288592 = SURFACE_STYLE_FILL_AREA(#288593); +#288593 = FILL_AREA_STYLE('',(#288594)); +#288594 = FILL_AREA_STYLE_COLOUR('',#280691); +#288595 = CURVE_STYLE('',#288596,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288597 = STYLED_ITEM('color',(#288598),#121189); +#288598 = PRESENTATION_STYLE_ASSIGNMENT((#288599,#288604)); +#288599 = SURFACE_STYLE_USAGE(.BOTH.,#288600); +#288600 = SURFACE_SIDE_STYLE('',(#288601)); +#288601 = SURFACE_STYLE_FILL_AREA(#288602); +#288602 = FILL_AREA_STYLE('',(#288603)); +#288603 = FILL_AREA_STYLE_COLOUR('',#280691); +#288604 = CURVE_STYLE('',#288605,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288606 = STYLED_ITEM('color',(#288607),#121231); +#288607 = PRESENTATION_STYLE_ASSIGNMENT((#288608,#288613)); +#288608 = SURFACE_STYLE_USAGE(.BOTH.,#288609); +#288609 = SURFACE_SIDE_STYLE('',(#288610)); +#288610 = SURFACE_STYLE_FILL_AREA(#288611); +#288611 = FILL_AREA_STYLE('',(#288612)); +#288612 = FILL_AREA_STYLE_COLOUR('',#280691); +#288613 = CURVE_STYLE('',#288614,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288615 = STYLED_ITEM('color',(#288616),#121248); +#288616 = PRESENTATION_STYLE_ASSIGNMENT((#288617,#288622)); +#288617 = SURFACE_STYLE_USAGE(.BOTH.,#288618); +#288618 = SURFACE_SIDE_STYLE('',(#288619)); +#288619 = SURFACE_STYLE_FILL_AREA(#288620); +#288620 = FILL_AREA_STYLE('',(#288621)); +#288621 = FILL_AREA_STYLE_COLOUR('',#279624); +#288622 = CURVE_STYLE('',#288623,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288624 = OVER_RIDING_STYLED_ITEM('overriding color',(#288625),#121255, + #288615); +#288625 = PRESENTATION_STYLE_ASSIGNMENT((#288626,#288631)); +#288626 = SURFACE_STYLE_USAGE(.BOTH.,#288627); +#288627 = SURFACE_SIDE_STYLE('',(#288628)); +#288628 = SURFACE_STYLE_FILL_AREA(#288629); +#288629 = FILL_AREA_STYLE('',(#288630)); +#288630 = FILL_AREA_STYLE_COLOUR('',#280691); +#288631 = CURVE_STYLE('',#288632,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288633 = STYLED_ITEM('color',(#288634),#121265); +#288634 = PRESENTATION_STYLE_ASSIGNMENT((#288635,#288640)); +#288635 = SURFACE_STYLE_USAGE(.BOTH.,#288636); +#288636 = SURFACE_SIDE_STYLE('',(#288637)); +#288637 = SURFACE_STYLE_FILL_AREA(#288638); +#288638 = FILL_AREA_STYLE('',(#288639)); +#288639 = FILL_AREA_STYLE_COLOUR('',#279624); +#288640 = CURVE_STYLE('',#288641,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288642 = OVER_RIDING_STYLED_ITEM('overriding color',(#288643),#121270, + #288633); +#288643 = PRESENTATION_STYLE_ASSIGNMENT((#288644,#288649)); +#288644 = SURFACE_STYLE_USAGE(.BOTH.,#288645); +#288645 = SURFACE_SIDE_STYLE('',(#288646)); +#288646 = SURFACE_STYLE_FILL_AREA(#288647); +#288647 = FILL_AREA_STYLE('',(#288648)); +#288648 = FILL_AREA_STYLE_COLOUR('',#280691); +#288649 = CURVE_STYLE('',#288650,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288651 = STYLED_ITEM('color',(#288652),#121282); +#288652 = PRESENTATION_STYLE_ASSIGNMENT((#288653,#288658)); +#288653 = SURFACE_STYLE_USAGE(.BOTH.,#288654); +#288654 = SURFACE_SIDE_STYLE('',(#288655)); +#288655 = SURFACE_STYLE_FILL_AREA(#288656); +#288656 = FILL_AREA_STYLE('',(#288657)); +#288657 = FILL_AREA_STYLE_COLOUR('',#280691); +#288658 = CURVE_STYLE('',#288659,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288660 = STYLED_ITEM('color',(#288661),#121331); +#288661 = PRESENTATION_STYLE_ASSIGNMENT((#288662,#288667)); +#288662 = SURFACE_STYLE_USAGE(.BOTH.,#288663); +#288663 = SURFACE_SIDE_STYLE('',(#288664)); +#288664 = SURFACE_STYLE_FILL_AREA(#288665); +#288665 = FILL_AREA_STYLE('',(#288666)); +#288666 = FILL_AREA_STYLE_COLOUR('',#280691); +#288667 = CURVE_STYLE('',#288668,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288669 = STYLED_ITEM('color',(#288670),#121355); +#288670 = PRESENTATION_STYLE_ASSIGNMENT((#288671,#288676)); +#288671 = SURFACE_STYLE_USAGE(.BOTH.,#288672); +#288672 = SURFACE_SIDE_STYLE('',(#288673)); +#288673 = SURFACE_STYLE_FILL_AREA(#288674); +#288674 = FILL_AREA_STYLE('',(#288675)); +#288675 = FILL_AREA_STYLE_COLOUR('',#280691); +#288676 = CURVE_STYLE('',#288677,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288678 = STYLED_ITEM('color',(#288679),#121397); +#288679 = PRESENTATION_STYLE_ASSIGNMENT((#288680,#288685)); +#288680 = SURFACE_STYLE_USAGE(.BOTH.,#288681); +#288681 = SURFACE_SIDE_STYLE('',(#288682)); +#288682 = SURFACE_STYLE_FILL_AREA(#288683); +#288683 = FILL_AREA_STYLE('',(#288684)); +#288684 = FILL_AREA_STYLE_COLOUR('',#280691); +#288685 = CURVE_STYLE('',#288686,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288687 = STYLED_ITEM('color',(#288688),#121414); +#288688 = PRESENTATION_STYLE_ASSIGNMENT((#288689,#288694)); +#288689 = SURFACE_STYLE_USAGE(.BOTH.,#288690); +#288690 = SURFACE_SIDE_STYLE('',(#288691)); +#288691 = SURFACE_STYLE_FILL_AREA(#288692); +#288692 = FILL_AREA_STYLE('',(#288693)); +#288693 = FILL_AREA_STYLE_COLOUR('',#279624); +#288694 = CURVE_STYLE('',#288695,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288696 = OVER_RIDING_STYLED_ITEM('overriding color',(#288697),#121421, + #288687); +#288697 = PRESENTATION_STYLE_ASSIGNMENT((#288698,#288703)); +#288698 = SURFACE_STYLE_USAGE(.BOTH.,#288699); +#288699 = SURFACE_SIDE_STYLE('',(#288700)); +#288700 = SURFACE_STYLE_FILL_AREA(#288701); +#288701 = FILL_AREA_STYLE('',(#288702)); +#288702 = FILL_AREA_STYLE_COLOUR('',#280691); +#288703 = CURVE_STYLE('',#288704,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288705 = STYLED_ITEM('color',(#288706),#121431); +#288706 = PRESENTATION_STYLE_ASSIGNMENT((#288707,#288712)); +#288707 = SURFACE_STYLE_USAGE(.BOTH.,#288708); +#288708 = SURFACE_SIDE_STYLE('',(#288709)); +#288709 = SURFACE_STYLE_FILL_AREA(#288710); +#288710 = FILL_AREA_STYLE('',(#288711)); +#288711 = FILL_AREA_STYLE_COLOUR('',#279624); +#288712 = CURVE_STYLE('',#288713,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288714 = OVER_RIDING_STYLED_ITEM('overriding color',(#288715),#121436, + #288705); +#288715 = PRESENTATION_STYLE_ASSIGNMENT((#288716,#288721)); +#288716 = SURFACE_STYLE_USAGE(.BOTH.,#288717); +#288717 = SURFACE_SIDE_STYLE('',(#288718)); +#288718 = SURFACE_STYLE_FILL_AREA(#288719); +#288719 = FILL_AREA_STYLE('',(#288720)); +#288720 = FILL_AREA_STYLE_COLOUR('',#280691); +#288721 = CURVE_STYLE('',#288722,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288723 = STYLED_ITEM('color',(#288724),#121448); +#288724 = PRESENTATION_STYLE_ASSIGNMENT((#288725,#288730)); +#288725 = SURFACE_STYLE_USAGE(.BOTH.,#288726); +#288726 = SURFACE_SIDE_STYLE('',(#288727)); +#288727 = SURFACE_STYLE_FILL_AREA(#288728); +#288728 = FILL_AREA_STYLE('',(#288729)); +#288729 = FILL_AREA_STYLE_COLOUR('',#280691); +#288730 = CURVE_STYLE('',#288731,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288732 = STYLED_ITEM('color',(#288733),#121497); +#288733 = PRESENTATION_STYLE_ASSIGNMENT((#288734,#288739)); +#288734 = SURFACE_STYLE_USAGE(.BOTH.,#288735); +#288735 = SURFACE_SIDE_STYLE('',(#288736)); +#288736 = SURFACE_STYLE_FILL_AREA(#288737); +#288737 = FILL_AREA_STYLE('',(#288738)); +#288738 = FILL_AREA_STYLE_COLOUR('',#280691); +#288739 = CURVE_STYLE('',#288740,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288741 = STYLED_ITEM('color',(#288742),#121521); +#288742 = PRESENTATION_STYLE_ASSIGNMENT((#288743,#288748)); +#288743 = SURFACE_STYLE_USAGE(.BOTH.,#288744); +#288744 = SURFACE_SIDE_STYLE('',(#288745)); +#288745 = SURFACE_STYLE_FILL_AREA(#288746); +#288746 = FILL_AREA_STYLE('',(#288747)); +#288747 = FILL_AREA_STYLE_COLOUR('',#280691); +#288748 = CURVE_STYLE('',#288749,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288750 = STYLED_ITEM('color',(#288751),#121563); +#288751 = PRESENTATION_STYLE_ASSIGNMENT((#288752,#288757)); +#288752 = SURFACE_STYLE_USAGE(.BOTH.,#288753); +#288753 = SURFACE_SIDE_STYLE('',(#288754)); +#288754 = SURFACE_STYLE_FILL_AREA(#288755); +#288755 = FILL_AREA_STYLE('',(#288756)); +#288756 = FILL_AREA_STYLE_COLOUR('',#280691); +#288757 = CURVE_STYLE('',#288758,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288759 = STYLED_ITEM('color',(#288760),#121580); +#288760 = PRESENTATION_STYLE_ASSIGNMENT((#288761,#288766)); +#288761 = SURFACE_STYLE_USAGE(.BOTH.,#288762); +#288762 = SURFACE_SIDE_STYLE('',(#288763)); +#288763 = SURFACE_STYLE_FILL_AREA(#288764); +#288764 = FILL_AREA_STYLE('',(#288765)); +#288765 = FILL_AREA_STYLE_COLOUR('',#279624); +#288766 = CURVE_STYLE('',#288767,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288768 = OVER_RIDING_STYLED_ITEM('overriding color',(#288769),#121587, + #288759); +#288769 = PRESENTATION_STYLE_ASSIGNMENT((#288770,#288775)); +#288770 = SURFACE_STYLE_USAGE(.BOTH.,#288771); +#288771 = SURFACE_SIDE_STYLE('',(#288772)); +#288772 = SURFACE_STYLE_FILL_AREA(#288773); +#288773 = FILL_AREA_STYLE('',(#288774)); +#288774 = FILL_AREA_STYLE_COLOUR('',#280691); +#288775 = CURVE_STYLE('',#288776,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288777 = STYLED_ITEM('color',(#288778),#121597); +#288778 = PRESENTATION_STYLE_ASSIGNMENT((#288779,#288784)); +#288779 = SURFACE_STYLE_USAGE(.BOTH.,#288780); +#288780 = SURFACE_SIDE_STYLE('',(#288781)); +#288781 = SURFACE_STYLE_FILL_AREA(#288782); +#288782 = FILL_AREA_STYLE('',(#288783)); +#288783 = FILL_AREA_STYLE_COLOUR('',#279624); +#288784 = CURVE_STYLE('',#288785,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288786 = OVER_RIDING_STYLED_ITEM('overriding color',(#288787),#121602, + #288777); +#288787 = PRESENTATION_STYLE_ASSIGNMENT((#288788,#288793)); +#288788 = SURFACE_STYLE_USAGE(.BOTH.,#288789); +#288789 = SURFACE_SIDE_STYLE('',(#288790)); +#288790 = SURFACE_STYLE_FILL_AREA(#288791); +#288791 = FILL_AREA_STYLE('',(#288792)); +#288792 = FILL_AREA_STYLE_COLOUR('',#280691); +#288793 = CURVE_STYLE('',#288794,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288795 = STYLED_ITEM('color',(#288796),#121614); +#288796 = PRESENTATION_STYLE_ASSIGNMENT((#288797,#288802)); +#288797 = SURFACE_STYLE_USAGE(.BOTH.,#288798); +#288798 = SURFACE_SIDE_STYLE('',(#288799)); +#288799 = SURFACE_STYLE_FILL_AREA(#288800); +#288800 = FILL_AREA_STYLE('',(#288801)); +#288801 = FILL_AREA_STYLE_COLOUR('',#280691); +#288802 = CURVE_STYLE('',#288803,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288804 = STYLED_ITEM('color',(#288805),#121663); +#288805 = PRESENTATION_STYLE_ASSIGNMENT((#288806,#288811)); +#288806 = SURFACE_STYLE_USAGE(.BOTH.,#288807); +#288807 = SURFACE_SIDE_STYLE('',(#288808)); +#288808 = SURFACE_STYLE_FILL_AREA(#288809); +#288809 = FILL_AREA_STYLE('',(#288810)); +#288810 = FILL_AREA_STYLE_COLOUR('',#280691); +#288811 = CURVE_STYLE('',#288812,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288813 = STYLED_ITEM('color',(#288814),#121687); +#288814 = PRESENTATION_STYLE_ASSIGNMENT((#288815,#288820)); +#288815 = SURFACE_STYLE_USAGE(.BOTH.,#288816); +#288816 = SURFACE_SIDE_STYLE('',(#288817)); +#288817 = SURFACE_STYLE_FILL_AREA(#288818); +#288818 = FILL_AREA_STYLE('',(#288819)); +#288819 = FILL_AREA_STYLE_COLOUR('',#280691); +#288820 = CURVE_STYLE('',#288821,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288822 = STYLED_ITEM('color',(#288823),#121729); +#288823 = PRESENTATION_STYLE_ASSIGNMENT((#288824,#288829)); +#288824 = SURFACE_STYLE_USAGE(.BOTH.,#288825); +#288825 = SURFACE_SIDE_STYLE('',(#288826)); +#288826 = SURFACE_STYLE_FILL_AREA(#288827); +#288827 = FILL_AREA_STYLE('',(#288828)); +#288828 = FILL_AREA_STYLE_COLOUR('',#280691); +#288829 = CURVE_STYLE('',#288830,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288831 = STYLED_ITEM('color',(#288832),#121746); +#288832 = PRESENTATION_STYLE_ASSIGNMENT((#288833,#288838)); +#288833 = SURFACE_STYLE_USAGE(.BOTH.,#288834); +#288834 = SURFACE_SIDE_STYLE('',(#288835)); +#288835 = SURFACE_STYLE_FILL_AREA(#288836); +#288836 = FILL_AREA_STYLE('',(#288837)); +#288837 = FILL_AREA_STYLE_COLOUR('',#279624); +#288838 = CURVE_STYLE('',#288839,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288840 = OVER_RIDING_STYLED_ITEM('overriding color',(#288841),#121753, + #288831); +#288841 = PRESENTATION_STYLE_ASSIGNMENT((#288842,#288847)); +#288842 = SURFACE_STYLE_USAGE(.BOTH.,#288843); +#288843 = SURFACE_SIDE_STYLE('',(#288844)); +#288844 = SURFACE_STYLE_FILL_AREA(#288845); +#288845 = FILL_AREA_STYLE('',(#288846)); +#288846 = FILL_AREA_STYLE_COLOUR('',#280691); +#288847 = CURVE_STYLE('',#288848,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288849 = STYLED_ITEM('color',(#288850),#121763); +#288850 = PRESENTATION_STYLE_ASSIGNMENT((#288851,#288856)); +#288851 = SURFACE_STYLE_USAGE(.BOTH.,#288852); +#288852 = SURFACE_SIDE_STYLE('',(#288853)); +#288853 = SURFACE_STYLE_FILL_AREA(#288854); +#288854 = FILL_AREA_STYLE('',(#288855)); +#288855 = FILL_AREA_STYLE_COLOUR('',#279624); +#288856 = CURVE_STYLE('',#288857,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288858 = OVER_RIDING_STYLED_ITEM('overriding color',(#288859),#121768, + #288849); +#288859 = PRESENTATION_STYLE_ASSIGNMENT((#288860,#288865)); +#288860 = SURFACE_STYLE_USAGE(.BOTH.,#288861); +#288861 = SURFACE_SIDE_STYLE('',(#288862)); +#288862 = SURFACE_STYLE_FILL_AREA(#288863); +#288863 = FILL_AREA_STYLE('',(#288864)); +#288864 = FILL_AREA_STYLE_COLOUR('',#280691); +#288865 = CURVE_STYLE('',#288866,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288867 = STYLED_ITEM('color',(#288868),#121780); +#288868 = PRESENTATION_STYLE_ASSIGNMENT((#288869,#288874)); +#288869 = SURFACE_STYLE_USAGE(.BOTH.,#288870); +#288870 = SURFACE_SIDE_STYLE('',(#288871)); +#288871 = SURFACE_STYLE_FILL_AREA(#288872); +#288872 = FILL_AREA_STYLE('',(#288873)); +#288873 = FILL_AREA_STYLE_COLOUR('',#280691); +#288874 = CURVE_STYLE('',#288875,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288876 = STYLED_ITEM('color',(#288877),#121829); +#288877 = PRESENTATION_STYLE_ASSIGNMENT((#288878,#288883)); +#288878 = SURFACE_STYLE_USAGE(.BOTH.,#288879); +#288879 = SURFACE_SIDE_STYLE('',(#288880)); +#288880 = SURFACE_STYLE_FILL_AREA(#288881); +#288881 = FILL_AREA_STYLE('',(#288882)); +#288882 = FILL_AREA_STYLE_COLOUR('',#280691); +#288883 = CURVE_STYLE('',#288884,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288885 = STYLED_ITEM('color',(#288886),#121853); +#288886 = PRESENTATION_STYLE_ASSIGNMENT((#288887,#288892)); +#288887 = SURFACE_STYLE_USAGE(.BOTH.,#288888); +#288888 = SURFACE_SIDE_STYLE('',(#288889)); +#288889 = SURFACE_STYLE_FILL_AREA(#288890); +#288890 = FILL_AREA_STYLE('',(#288891)); +#288891 = FILL_AREA_STYLE_COLOUR('',#280691); +#288892 = CURVE_STYLE('',#288893,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288894 = STYLED_ITEM('color',(#288895),#121895); +#288895 = PRESENTATION_STYLE_ASSIGNMENT((#288896,#288901)); +#288896 = SURFACE_STYLE_USAGE(.BOTH.,#288897); +#288897 = SURFACE_SIDE_STYLE('',(#288898)); +#288898 = SURFACE_STYLE_FILL_AREA(#288899); +#288899 = FILL_AREA_STYLE('',(#288900)); +#288900 = FILL_AREA_STYLE_COLOUR('',#280691); +#288901 = CURVE_STYLE('',#288902,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288903 = STYLED_ITEM('color',(#288904),#121912); +#288904 = PRESENTATION_STYLE_ASSIGNMENT((#288905,#288910)); +#288905 = SURFACE_STYLE_USAGE(.BOTH.,#288906); +#288906 = SURFACE_SIDE_STYLE('',(#288907)); +#288907 = SURFACE_STYLE_FILL_AREA(#288908); +#288908 = FILL_AREA_STYLE('',(#288909)); +#288909 = FILL_AREA_STYLE_COLOUR('',#279624); +#288910 = CURVE_STYLE('',#288911,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288912 = OVER_RIDING_STYLED_ITEM('overriding color',(#288913),#121919, + #288903); +#288913 = PRESENTATION_STYLE_ASSIGNMENT((#288914,#288919)); +#288914 = SURFACE_STYLE_USAGE(.BOTH.,#288915); +#288915 = SURFACE_SIDE_STYLE('',(#288916)); +#288916 = SURFACE_STYLE_FILL_AREA(#288917); +#288917 = FILL_AREA_STYLE('',(#288918)); +#288918 = FILL_AREA_STYLE_COLOUR('',#280691); +#288919 = CURVE_STYLE('',#288920,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288921 = STYLED_ITEM('color',(#288922),#121929); +#288922 = PRESENTATION_STYLE_ASSIGNMENT((#288923,#288928)); +#288923 = SURFACE_STYLE_USAGE(.BOTH.,#288924); +#288924 = SURFACE_SIDE_STYLE('',(#288925)); +#288925 = SURFACE_STYLE_FILL_AREA(#288926); +#288926 = FILL_AREA_STYLE('',(#288927)); +#288927 = FILL_AREA_STYLE_COLOUR('',#279624); +#288928 = CURVE_STYLE('',#288929,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288930 = OVER_RIDING_STYLED_ITEM('overriding color',(#288931),#121934, + #288921); +#288931 = PRESENTATION_STYLE_ASSIGNMENT((#288932,#288937)); +#288932 = SURFACE_STYLE_USAGE(.BOTH.,#288933); +#288933 = SURFACE_SIDE_STYLE('',(#288934)); +#288934 = SURFACE_STYLE_FILL_AREA(#288935); +#288935 = FILL_AREA_STYLE('',(#288936)); +#288936 = FILL_AREA_STYLE_COLOUR('',#280691); +#288937 = CURVE_STYLE('',#288938,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288939 = STYLED_ITEM('color',(#288940),#121946); +#288940 = PRESENTATION_STYLE_ASSIGNMENT((#288941,#288946)); +#288941 = SURFACE_STYLE_USAGE(.BOTH.,#288942); +#288942 = SURFACE_SIDE_STYLE('',(#288943)); +#288943 = SURFACE_STYLE_FILL_AREA(#288944); +#288944 = FILL_AREA_STYLE('',(#288945)); +#288945 = FILL_AREA_STYLE_COLOUR('',#280691); +#288946 = CURVE_STYLE('',#288947,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288948 = STYLED_ITEM('color',(#288949),#121995); +#288949 = PRESENTATION_STYLE_ASSIGNMENT((#288950,#288955)); +#288950 = SURFACE_STYLE_USAGE(.BOTH.,#288951); +#288951 = SURFACE_SIDE_STYLE('',(#288952)); +#288952 = SURFACE_STYLE_FILL_AREA(#288953); +#288953 = FILL_AREA_STYLE('',(#288954)); +#288954 = FILL_AREA_STYLE_COLOUR('',#280691); +#288955 = CURVE_STYLE('',#288956,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288957 = STYLED_ITEM('color',(#288958),#122019); +#288958 = PRESENTATION_STYLE_ASSIGNMENT((#288959,#288964)); +#288959 = SURFACE_STYLE_USAGE(.BOTH.,#288960); +#288960 = SURFACE_SIDE_STYLE('',(#288961)); +#288961 = SURFACE_STYLE_FILL_AREA(#288962); +#288962 = FILL_AREA_STYLE('',(#288963)); +#288963 = FILL_AREA_STYLE_COLOUR('',#280691); +#288964 = CURVE_STYLE('',#288965,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288966 = STYLED_ITEM('color',(#288967),#122061); +#288967 = PRESENTATION_STYLE_ASSIGNMENT((#288968,#288973)); +#288968 = SURFACE_STYLE_USAGE(.BOTH.,#288969); +#288969 = SURFACE_SIDE_STYLE('',(#288970)); +#288970 = SURFACE_STYLE_FILL_AREA(#288971); +#288971 = FILL_AREA_STYLE('',(#288972)); +#288972 = FILL_AREA_STYLE_COLOUR('',#280691); +#288973 = CURVE_STYLE('',#288974,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288975 = STYLED_ITEM('color',(#288976),#122078); +#288976 = PRESENTATION_STYLE_ASSIGNMENT((#288977,#288982)); +#288977 = SURFACE_STYLE_USAGE(.BOTH.,#288978); +#288978 = SURFACE_SIDE_STYLE('',(#288979)); +#288979 = SURFACE_STYLE_FILL_AREA(#288980); +#288980 = FILL_AREA_STYLE('',(#288981)); +#288981 = FILL_AREA_STYLE_COLOUR('',#279624); +#288982 = CURVE_STYLE('',#288983,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#288983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288984 = OVER_RIDING_STYLED_ITEM('overriding color',(#288985),#122085, + #288975); +#288985 = PRESENTATION_STYLE_ASSIGNMENT((#288986,#288991)); +#288986 = SURFACE_STYLE_USAGE(.BOTH.,#288987); +#288987 = SURFACE_SIDE_STYLE('',(#288988)); +#288988 = SURFACE_STYLE_FILL_AREA(#288989); +#288989 = FILL_AREA_STYLE('',(#288990)); +#288990 = FILL_AREA_STYLE_COLOUR('',#280691); +#288991 = CURVE_STYLE('',#288992,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#288992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288993 = STYLED_ITEM('color',(#288994),#122095); +#288994 = PRESENTATION_STYLE_ASSIGNMENT((#288995,#289000)); +#288995 = SURFACE_STYLE_USAGE(.BOTH.,#288996); +#288996 = SURFACE_SIDE_STYLE('',(#288997)); +#288997 = SURFACE_STYLE_FILL_AREA(#288998); +#288998 = FILL_AREA_STYLE('',(#288999)); +#288999 = FILL_AREA_STYLE_COLOUR('',#279624); +#289000 = CURVE_STYLE('',#289001,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#289001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289002 = OVER_RIDING_STYLED_ITEM('overriding color',(#289003),#122100, + #288993); +#289003 = PRESENTATION_STYLE_ASSIGNMENT((#289004,#289009)); +#289004 = SURFACE_STYLE_USAGE(.BOTH.,#289005); +#289005 = SURFACE_SIDE_STYLE('',(#289006)); +#289006 = SURFACE_STYLE_FILL_AREA(#289007); +#289007 = FILL_AREA_STYLE('',(#289008)); +#289008 = FILL_AREA_STYLE_COLOUR('',#280691); +#289009 = CURVE_STYLE('',#289010,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289011 = STYLED_ITEM('color',(#289012),#122112); +#289012 = PRESENTATION_STYLE_ASSIGNMENT((#289013,#289018)); +#289013 = SURFACE_STYLE_USAGE(.BOTH.,#289014); +#289014 = SURFACE_SIDE_STYLE('',(#289015)); +#289015 = SURFACE_STYLE_FILL_AREA(#289016); +#289016 = FILL_AREA_STYLE('',(#289017)); +#289017 = FILL_AREA_STYLE_COLOUR('',#280691); +#289018 = CURVE_STYLE('',#289019,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289020 = STYLED_ITEM('color',(#289021),#122161); +#289021 = PRESENTATION_STYLE_ASSIGNMENT((#289022,#289027)); +#289022 = SURFACE_STYLE_USAGE(.BOTH.,#289023); +#289023 = SURFACE_SIDE_STYLE('',(#289024)); +#289024 = SURFACE_STYLE_FILL_AREA(#289025); +#289025 = FILL_AREA_STYLE('',(#289026)); +#289026 = FILL_AREA_STYLE_COLOUR('',#280691); +#289027 = CURVE_STYLE('',#289028,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289029 = STYLED_ITEM('color',(#289030),#122185); +#289030 = PRESENTATION_STYLE_ASSIGNMENT((#289031,#289036)); +#289031 = SURFACE_STYLE_USAGE(.BOTH.,#289032); +#289032 = SURFACE_SIDE_STYLE('',(#289033)); +#289033 = SURFACE_STYLE_FILL_AREA(#289034); +#289034 = FILL_AREA_STYLE('',(#289035)); +#289035 = FILL_AREA_STYLE_COLOUR('',#280691); +#289036 = CURVE_STYLE('',#289037,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289038 = STYLED_ITEM('color',(#289039),#122227); +#289039 = PRESENTATION_STYLE_ASSIGNMENT((#289040,#289045)); +#289040 = SURFACE_STYLE_USAGE(.BOTH.,#289041); +#289041 = SURFACE_SIDE_STYLE('',(#289042)); +#289042 = SURFACE_STYLE_FILL_AREA(#289043); +#289043 = FILL_AREA_STYLE('',(#289044)); +#289044 = FILL_AREA_STYLE_COLOUR('',#280691); +#289045 = CURVE_STYLE('',#289046,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289047 = STYLED_ITEM('color',(#289048),#122244); +#289048 = PRESENTATION_STYLE_ASSIGNMENT((#289049,#289054)); +#289049 = SURFACE_STYLE_USAGE(.BOTH.,#289050); +#289050 = SURFACE_SIDE_STYLE('',(#289051)); +#289051 = SURFACE_STYLE_FILL_AREA(#289052); +#289052 = FILL_AREA_STYLE('',(#289053)); +#289053 = FILL_AREA_STYLE_COLOUR('',#279624); +#289054 = CURVE_STYLE('',#289055,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#289055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289056 = OVER_RIDING_STYLED_ITEM('overriding color',(#289057),#122251, + #289047); +#289057 = PRESENTATION_STYLE_ASSIGNMENT((#289058,#289063)); +#289058 = SURFACE_STYLE_USAGE(.BOTH.,#289059); +#289059 = SURFACE_SIDE_STYLE('',(#289060)); +#289060 = SURFACE_STYLE_FILL_AREA(#289061); +#289061 = FILL_AREA_STYLE('',(#289062)); +#289062 = FILL_AREA_STYLE_COLOUR('',#280691); +#289063 = CURVE_STYLE('',#289064,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289065 = STYLED_ITEM('color',(#289066),#122261); +#289066 = PRESENTATION_STYLE_ASSIGNMENT((#289067,#289072)); +#289067 = SURFACE_STYLE_USAGE(.BOTH.,#289068); +#289068 = SURFACE_SIDE_STYLE('',(#289069)); +#289069 = SURFACE_STYLE_FILL_AREA(#289070); +#289070 = FILL_AREA_STYLE('',(#289071)); +#289071 = FILL_AREA_STYLE_COLOUR('',#279624); +#289072 = CURVE_STYLE('',#289073,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#289073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289074 = OVER_RIDING_STYLED_ITEM('overriding color',(#289075),#122266, + #289065); +#289075 = PRESENTATION_STYLE_ASSIGNMENT((#289076,#289081)); +#289076 = SURFACE_STYLE_USAGE(.BOTH.,#289077); +#289077 = SURFACE_SIDE_STYLE('',(#289078)); +#289078 = SURFACE_STYLE_FILL_AREA(#289079); +#289079 = FILL_AREA_STYLE('',(#289080)); +#289080 = FILL_AREA_STYLE_COLOUR('',#280691); +#289081 = CURVE_STYLE('',#289082,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289083 = STYLED_ITEM('color',(#289084),#122278); +#289084 = PRESENTATION_STYLE_ASSIGNMENT((#289085,#289090)); +#289085 = SURFACE_STYLE_USAGE(.BOTH.,#289086); +#289086 = SURFACE_SIDE_STYLE('',(#289087)); +#289087 = SURFACE_STYLE_FILL_AREA(#289088); +#289088 = FILL_AREA_STYLE('',(#289089)); +#289089 = FILL_AREA_STYLE_COLOUR('',#280691); +#289090 = CURVE_STYLE('',#289091,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289092 = STYLED_ITEM('color',(#289093),#122327); +#289093 = PRESENTATION_STYLE_ASSIGNMENT((#289094,#289099)); +#289094 = SURFACE_STYLE_USAGE(.BOTH.,#289095); +#289095 = SURFACE_SIDE_STYLE('',(#289096)); +#289096 = SURFACE_STYLE_FILL_AREA(#289097); +#289097 = FILL_AREA_STYLE('',(#289098)); +#289098 = FILL_AREA_STYLE_COLOUR('',#280691); +#289099 = CURVE_STYLE('',#289100,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289101 = STYLED_ITEM('color',(#289102),#122351); +#289102 = PRESENTATION_STYLE_ASSIGNMENT((#289103,#289108)); +#289103 = SURFACE_STYLE_USAGE(.BOTH.,#289104); +#289104 = SURFACE_SIDE_STYLE('',(#289105)); +#289105 = SURFACE_STYLE_FILL_AREA(#289106); +#289106 = FILL_AREA_STYLE('',(#289107)); +#289107 = FILL_AREA_STYLE_COLOUR('',#280691); +#289108 = CURVE_STYLE('',#289109,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289110 = STYLED_ITEM('color',(#289111),#122393); +#289111 = PRESENTATION_STYLE_ASSIGNMENT((#289112,#289117)); +#289112 = SURFACE_STYLE_USAGE(.BOTH.,#289113); +#289113 = SURFACE_SIDE_STYLE('',(#289114)); +#289114 = SURFACE_STYLE_FILL_AREA(#289115); +#289115 = FILL_AREA_STYLE('',(#289116)); +#289116 = FILL_AREA_STYLE_COLOUR('',#280691); +#289117 = CURVE_STYLE('',#289118,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289119 = STYLED_ITEM('color',(#289120),#122410); +#289120 = PRESENTATION_STYLE_ASSIGNMENT((#289121,#289126)); +#289121 = SURFACE_STYLE_USAGE(.BOTH.,#289122); +#289122 = SURFACE_SIDE_STYLE('',(#289123)); +#289123 = SURFACE_STYLE_FILL_AREA(#289124); +#289124 = FILL_AREA_STYLE('',(#289125)); +#289125 = FILL_AREA_STYLE_COLOUR('',#279624); +#289126 = CURVE_STYLE('',#289127,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#289127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289128 = OVER_RIDING_STYLED_ITEM('overriding color',(#289129),#122417, + #289119); +#289129 = PRESENTATION_STYLE_ASSIGNMENT((#289130,#289135)); +#289130 = SURFACE_STYLE_USAGE(.BOTH.,#289131); +#289131 = SURFACE_SIDE_STYLE('',(#289132)); +#289132 = SURFACE_STYLE_FILL_AREA(#289133); +#289133 = FILL_AREA_STYLE('',(#289134)); +#289134 = FILL_AREA_STYLE_COLOUR('',#280691); +#289135 = CURVE_STYLE('',#289136,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289137 = STYLED_ITEM('color',(#289138),#122427); +#289138 = PRESENTATION_STYLE_ASSIGNMENT((#289139,#289144)); +#289139 = SURFACE_STYLE_USAGE(.BOTH.,#289140); +#289140 = SURFACE_SIDE_STYLE('',(#289141)); +#289141 = SURFACE_STYLE_FILL_AREA(#289142); +#289142 = FILL_AREA_STYLE('',(#289143)); +#289143 = FILL_AREA_STYLE_COLOUR('',#279624); +#289144 = CURVE_STYLE('',#289145,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#289145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289146 = OVER_RIDING_STYLED_ITEM('overriding color',(#289147),#122432, + #289137); +#289147 = PRESENTATION_STYLE_ASSIGNMENT((#289148,#289153)); +#289148 = SURFACE_STYLE_USAGE(.BOTH.,#289149); +#289149 = SURFACE_SIDE_STYLE('',(#289150)); +#289150 = SURFACE_STYLE_FILL_AREA(#289151); +#289151 = FILL_AREA_STYLE('',(#289152)); +#289152 = FILL_AREA_STYLE_COLOUR('',#280691); +#289153 = CURVE_STYLE('',#289154,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289155 = STYLED_ITEM('color',(#289156),#122444); +#289156 = PRESENTATION_STYLE_ASSIGNMENT((#289157,#289162)); +#289157 = SURFACE_STYLE_USAGE(.BOTH.,#289158); +#289158 = SURFACE_SIDE_STYLE('',(#289159)); +#289159 = SURFACE_STYLE_FILL_AREA(#289160); +#289160 = FILL_AREA_STYLE('',(#289161)); +#289161 = FILL_AREA_STYLE_COLOUR('',#280691); +#289162 = CURVE_STYLE('',#289163,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289164 = STYLED_ITEM('color',(#289165),#122493); +#289165 = PRESENTATION_STYLE_ASSIGNMENT((#289166,#289171)); +#289166 = SURFACE_STYLE_USAGE(.BOTH.,#289167); +#289167 = SURFACE_SIDE_STYLE('',(#289168)); +#289168 = SURFACE_STYLE_FILL_AREA(#289169); +#289169 = FILL_AREA_STYLE('',(#289170)); +#289170 = FILL_AREA_STYLE_COLOUR('',#280691); +#289171 = CURVE_STYLE('',#289172,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289173 = STYLED_ITEM('color',(#289174),#122517); +#289174 = PRESENTATION_STYLE_ASSIGNMENT((#289175,#289180)); +#289175 = SURFACE_STYLE_USAGE(.BOTH.,#289176); +#289176 = SURFACE_SIDE_STYLE('',(#289177)); +#289177 = SURFACE_STYLE_FILL_AREA(#289178); +#289178 = FILL_AREA_STYLE('',(#289179)); +#289179 = FILL_AREA_STYLE_COLOUR('',#280691); +#289180 = CURVE_STYLE('',#289181,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289182 = STYLED_ITEM('color',(#289183),#122559); +#289183 = PRESENTATION_STYLE_ASSIGNMENT((#289184,#289189)); +#289184 = SURFACE_STYLE_USAGE(.BOTH.,#289185); +#289185 = SURFACE_SIDE_STYLE('',(#289186)); +#289186 = SURFACE_STYLE_FILL_AREA(#289187); +#289187 = FILL_AREA_STYLE('',(#289188)); +#289188 = FILL_AREA_STYLE_COLOUR('',#280691); +#289189 = CURVE_STYLE('',#289190,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289191 = STYLED_ITEM('color',(#289192),#122576); +#289192 = PRESENTATION_STYLE_ASSIGNMENT((#289193,#289198)); +#289193 = SURFACE_STYLE_USAGE(.BOTH.,#289194); +#289194 = SURFACE_SIDE_STYLE('',(#289195)); +#289195 = SURFACE_STYLE_FILL_AREA(#289196); +#289196 = FILL_AREA_STYLE('',(#289197)); +#289197 = FILL_AREA_STYLE_COLOUR('',#280691); +#289198 = CURVE_STYLE('',#289199,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289200 = STYLED_ITEM('color',(#289201),#122593); +#289201 = PRESENTATION_STYLE_ASSIGNMENT((#289202,#289207)); +#289202 = SURFACE_STYLE_USAGE(.BOTH.,#289203); +#289203 = SURFACE_SIDE_STYLE('',(#289204)); +#289204 = SURFACE_STYLE_FILL_AREA(#289205); +#289205 = FILL_AREA_STYLE('',(#289206)); +#289206 = FILL_AREA_STYLE_COLOUR('',#280691); +#289207 = CURVE_STYLE('',#289208,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289209 = STYLED_ITEM('color',(#289210),#122610); +#289210 = PRESENTATION_STYLE_ASSIGNMENT((#289211,#289216)); +#289211 = SURFACE_STYLE_USAGE(.BOTH.,#289212); +#289212 = SURFACE_SIDE_STYLE('',(#289213)); +#289213 = SURFACE_STYLE_FILL_AREA(#289214); +#289214 = FILL_AREA_STYLE('',(#289215)); +#289215 = FILL_AREA_STYLE_COLOUR('',#280691); +#289216 = CURVE_STYLE('',#289217,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289218 = STYLED_ITEM('color',(#289219),#122622); +#289219 = PRESENTATION_STYLE_ASSIGNMENT((#289220,#289225)); +#289220 = SURFACE_STYLE_USAGE(.BOTH.,#289221); +#289221 = SURFACE_SIDE_STYLE('',(#289222)); +#289222 = SURFACE_STYLE_FILL_AREA(#289223); +#289223 = FILL_AREA_STYLE('',(#289224)); +#289224 = FILL_AREA_STYLE_COLOUR('',#280691); +#289225 = CURVE_STYLE('',#289226,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289227 = STYLED_ITEM('color',(#289228),#122639); +#289228 = PRESENTATION_STYLE_ASSIGNMENT((#289229,#289234)); +#289229 = SURFACE_STYLE_USAGE(.BOTH.,#289230); +#289230 = SURFACE_SIDE_STYLE('',(#289231)); +#289231 = SURFACE_STYLE_FILL_AREA(#289232); +#289232 = FILL_AREA_STYLE('',(#289233)); +#289233 = FILL_AREA_STYLE_COLOUR('',#280691); +#289234 = CURVE_STYLE('',#289235,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289236 = STYLED_ITEM('color',(#289237),#122656); +#289237 = PRESENTATION_STYLE_ASSIGNMENT((#289238,#289243)); +#289238 = SURFACE_STYLE_USAGE(.BOTH.,#289239); +#289239 = SURFACE_SIDE_STYLE('',(#289240)); +#289240 = SURFACE_STYLE_FILL_AREA(#289241); +#289241 = FILL_AREA_STYLE('',(#289242)); +#289242 = FILL_AREA_STYLE_COLOUR('',#280691); +#289243 = CURVE_STYLE('',#289244,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289245 = STYLED_ITEM('color',(#289246),#122668); +#289246 = PRESENTATION_STYLE_ASSIGNMENT((#289247,#289252)); +#289247 = SURFACE_STYLE_USAGE(.BOTH.,#289248); +#289248 = SURFACE_SIDE_STYLE('',(#289249)); +#289249 = SURFACE_STYLE_FILL_AREA(#289250); +#289250 = FILL_AREA_STYLE('',(#289251)); +#289251 = FILL_AREA_STYLE_COLOUR('',#280691); +#289252 = CURVE_STYLE('',#289253,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289254 = STYLED_ITEM('color',(#289255),#122685); +#289255 = PRESENTATION_STYLE_ASSIGNMENT((#289256,#289261)); +#289256 = SURFACE_STYLE_USAGE(.BOTH.,#289257); +#289257 = SURFACE_SIDE_STYLE('',(#289258)); +#289258 = SURFACE_STYLE_FILL_AREA(#289259); +#289259 = FILL_AREA_STYLE('',(#289260)); +#289260 = FILL_AREA_STYLE_COLOUR('',#280691); +#289261 = CURVE_STYLE('',#289262,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289263 = STYLED_ITEM('color',(#289264),#122702); +#289264 = PRESENTATION_STYLE_ASSIGNMENT((#289265,#289270)); +#289265 = SURFACE_STYLE_USAGE(.BOTH.,#289266); +#289266 = SURFACE_SIDE_STYLE('',(#289267)); +#289267 = SURFACE_STYLE_FILL_AREA(#289268); +#289268 = FILL_AREA_STYLE('',(#289269)); +#289269 = FILL_AREA_STYLE_COLOUR('',#280691); +#289270 = CURVE_STYLE('',#289271,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289272 = STYLED_ITEM('color',(#289273),#122714); +#289273 = PRESENTATION_STYLE_ASSIGNMENT((#289274,#289279)); +#289274 = SURFACE_STYLE_USAGE(.BOTH.,#289275); +#289275 = SURFACE_SIDE_STYLE('',(#289276)); +#289276 = SURFACE_STYLE_FILL_AREA(#289277); +#289277 = FILL_AREA_STYLE('',(#289278)); +#289278 = FILL_AREA_STYLE_COLOUR('',#280691); +#289279 = CURVE_STYLE('',#289280,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289281 = STYLED_ITEM('color',(#289282),#122731); +#289282 = PRESENTATION_STYLE_ASSIGNMENT((#289283,#289288)); +#289283 = SURFACE_STYLE_USAGE(.BOTH.,#289284); +#289284 = SURFACE_SIDE_STYLE('',(#289285)); +#289285 = SURFACE_STYLE_FILL_AREA(#289286); +#289286 = FILL_AREA_STYLE('',(#289287)); +#289287 = FILL_AREA_STYLE_COLOUR('',#280691); +#289288 = CURVE_STYLE('',#289289,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289290 = STYLED_ITEM('color',(#289291),#122748); +#289291 = PRESENTATION_STYLE_ASSIGNMENT((#289292,#289297)); +#289292 = SURFACE_STYLE_USAGE(.BOTH.,#289293); +#289293 = SURFACE_SIDE_STYLE('',(#289294)); +#289294 = SURFACE_STYLE_FILL_AREA(#289295); +#289295 = FILL_AREA_STYLE('',(#289296)); +#289296 = FILL_AREA_STYLE_COLOUR('',#280691); +#289297 = CURVE_STYLE('',#289298,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289299 = STYLED_ITEM('color',(#289300),#122760); +#289300 = PRESENTATION_STYLE_ASSIGNMENT((#289301,#289306)); +#289301 = SURFACE_STYLE_USAGE(.BOTH.,#289302); +#289302 = SURFACE_SIDE_STYLE('',(#289303)); +#289303 = SURFACE_STYLE_FILL_AREA(#289304); +#289304 = FILL_AREA_STYLE('',(#289305)); +#289305 = FILL_AREA_STYLE_COLOUR('',#280691); +#289306 = CURVE_STYLE('',#289307,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289308 = STYLED_ITEM('color',(#289309),#122777); +#289309 = PRESENTATION_STYLE_ASSIGNMENT((#289310,#289315)); +#289310 = SURFACE_STYLE_USAGE(.BOTH.,#289311); +#289311 = SURFACE_SIDE_STYLE('',(#289312)); +#289312 = SURFACE_STYLE_FILL_AREA(#289313); +#289313 = FILL_AREA_STYLE('',(#289314)); +#289314 = FILL_AREA_STYLE_COLOUR('',#280691); +#289315 = CURVE_STYLE('',#289316,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289317 = STYLED_ITEM('color',(#289318),#122794); +#289318 = PRESENTATION_STYLE_ASSIGNMENT((#289319,#289324)); +#289319 = SURFACE_STYLE_USAGE(.BOTH.,#289320); +#289320 = SURFACE_SIDE_STYLE('',(#289321)); +#289321 = SURFACE_STYLE_FILL_AREA(#289322); +#289322 = FILL_AREA_STYLE('',(#289323)); +#289323 = FILL_AREA_STYLE_COLOUR('',#280691); +#289324 = CURVE_STYLE('',#289325,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289326 = STYLED_ITEM('color',(#289327),#122806); +#289327 = PRESENTATION_STYLE_ASSIGNMENT((#289328,#289333)); +#289328 = SURFACE_STYLE_USAGE(.BOTH.,#289329); +#289329 = SURFACE_SIDE_STYLE('',(#289330)); +#289330 = SURFACE_STYLE_FILL_AREA(#289331); +#289331 = FILL_AREA_STYLE('',(#289332)); +#289332 = FILL_AREA_STYLE_COLOUR('',#280691); +#289333 = CURVE_STYLE('',#289334,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289335 = STYLED_ITEM('color',(#289336),#122823); +#289336 = PRESENTATION_STYLE_ASSIGNMENT((#289337,#289342)); +#289337 = SURFACE_STYLE_USAGE(.BOTH.,#289338); +#289338 = SURFACE_SIDE_STYLE('',(#289339)); +#289339 = SURFACE_STYLE_FILL_AREA(#289340); +#289340 = FILL_AREA_STYLE('',(#289341)); +#289341 = FILL_AREA_STYLE_COLOUR('',#280691); +#289342 = CURVE_STYLE('',#289343,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289344 = STYLED_ITEM('color',(#289345),#122840); +#289345 = PRESENTATION_STYLE_ASSIGNMENT((#289346,#289351)); +#289346 = SURFACE_STYLE_USAGE(.BOTH.,#289347); +#289347 = SURFACE_SIDE_STYLE('',(#289348)); +#289348 = SURFACE_STYLE_FILL_AREA(#289349); +#289349 = FILL_AREA_STYLE('',(#289350)); +#289350 = FILL_AREA_STYLE_COLOUR('',#280691); +#289351 = CURVE_STYLE('',#289352,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289353 = STYLED_ITEM('color',(#289354),#122852); +#289354 = PRESENTATION_STYLE_ASSIGNMENT((#289355,#289360)); +#289355 = SURFACE_STYLE_USAGE(.BOTH.,#289356); +#289356 = SURFACE_SIDE_STYLE('',(#289357)); +#289357 = SURFACE_STYLE_FILL_AREA(#289358); +#289358 = FILL_AREA_STYLE('',(#289359)); +#289359 = FILL_AREA_STYLE_COLOUR('',#280691); +#289360 = CURVE_STYLE('',#289361,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289362 = STYLED_ITEM('color',(#289363),#122869); +#289363 = PRESENTATION_STYLE_ASSIGNMENT((#289364,#289369)); +#289364 = SURFACE_STYLE_USAGE(.BOTH.,#289365); +#289365 = SURFACE_SIDE_STYLE('',(#289366)); +#289366 = SURFACE_STYLE_FILL_AREA(#289367); +#289367 = FILL_AREA_STYLE('',(#289368)); +#289368 = FILL_AREA_STYLE_COLOUR('',#280691); +#289369 = CURVE_STYLE('',#289370,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289371 = STYLED_ITEM('color',(#289372),#122886); +#289372 = PRESENTATION_STYLE_ASSIGNMENT((#289373,#289378)); +#289373 = SURFACE_STYLE_USAGE(.BOTH.,#289374); +#289374 = SURFACE_SIDE_STYLE('',(#289375)); +#289375 = SURFACE_STYLE_FILL_AREA(#289376); +#289376 = FILL_AREA_STYLE('',(#289377)); +#289377 = FILL_AREA_STYLE_COLOUR('',#280691); +#289378 = CURVE_STYLE('',#289379,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289380 = STYLED_ITEM('color',(#289381),#122898); +#289381 = PRESENTATION_STYLE_ASSIGNMENT((#289382,#289387)); +#289382 = SURFACE_STYLE_USAGE(.BOTH.,#289383); +#289383 = SURFACE_SIDE_STYLE('',(#289384)); +#289384 = SURFACE_STYLE_FILL_AREA(#289385); +#289385 = FILL_AREA_STYLE('',(#289386)); +#289386 = FILL_AREA_STYLE_COLOUR('',#280691); +#289387 = CURVE_STYLE('',#289388,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289389 = STYLED_ITEM('color',(#289390),#122915); +#289390 = PRESENTATION_STYLE_ASSIGNMENT((#289391,#289396)); +#289391 = SURFACE_STYLE_USAGE(.BOTH.,#289392); +#289392 = SURFACE_SIDE_STYLE('',(#289393)); +#289393 = SURFACE_STYLE_FILL_AREA(#289394); +#289394 = FILL_AREA_STYLE('',(#289395)); +#289395 = FILL_AREA_STYLE_COLOUR('',#280691); +#289396 = CURVE_STYLE('',#289397,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289398 = STYLED_ITEM('color',(#289399),#122932); +#289399 = PRESENTATION_STYLE_ASSIGNMENT((#289400,#289405)); +#289400 = SURFACE_STYLE_USAGE(.BOTH.,#289401); +#289401 = SURFACE_SIDE_STYLE('',(#289402)); +#289402 = SURFACE_STYLE_FILL_AREA(#289403); +#289403 = FILL_AREA_STYLE('',(#289404)); +#289404 = FILL_AREA_STYLE_COLOUR('',#280691); +#289405 = CURVE_STYLE('',#289406,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289407 = STYLED_ITEM('color',(#289408),#122944); +#289408 = PRESENTATION_STYLE_ASSIGNMENT((#289409,#289414)); +#289409 = SURFACE_STYLE_USAGE(.BOTH.,#289410); +#289410 = SURFACE_SIDE_STYLE('',(#289411)); +#289411 = SURFACE_STYLE_FILL_AREA(#289412); +#289412 = FILL_AREA_STYLE('',(#289413)); +#289413 = FILL_AREA_STYLE_COLOUR('',#280691); +#289414 = CURVE_STYLE('',#289415,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289416 = STYLED_ITEM('color',(#289417),#122961); +#289417 = PRESENTATION_STYLE_ASSIGNMENT((#289418,#289423)); +#289418 = SURFACE_STYLE_USAGE(.BOTH.,#289419); +#289419 = SURFACE_SIDE_STYLE('',(#289420)); +#289420 = SURFACE_STYLE_FILL_AREA(#289421); +#289421 = FILL_AREA_STYLE('',(#289422)); +#289422 = FILL_AREA_STYLE_COLOUR('',#280691); +#289423 = CURVE_STYLE('',#289424,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289425 = STYLED_ITEM('color',(#289426),#122978); +#289426 = PRESENTATION_STYLE_ASSIGNMENT((#289427,#289432)); +#289427 = SURFACE_STYLE_USAGE(.BOTH.,#289428); +#289428 = SURFACE_SIDE_STYLE('',(#289429)); +#289429 = SURFACE_STYLE_FILL_AREA(#289430); +#289430 = FILL_AREA_STYLE('',(#289431)); +#289431 = FILL_AREA_STYLE_COLOUR('',#280691); +#289432 = CURVE_STYLE('',#289433,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289434 = STYLED_ITEM('color',(#289435),#122990); +#289435 = PRESENTATION_STYLE_ASSIGNMENT((#289436,#289441)); +#289436 = SURFACE_STYLE_USAGE(.BOTH.,#289437); +#289437 = SURFACE_SIDE_STYLE('',(#289438)); +#289438 = SURFACE_STYLE_FILL_AREA(#289439); +#289439 = FILL_AREA_STYLE('',(#289440)); +#289440 = FILL_AREA_STYLE_COLOUR('',#280691); +#289441 = CURVE_STYLE('',#289442,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289443 = STYLED_ITEM('color',(#289444),#123007); +#289444 = PRESENTATION_STYLE_ASSIGNMENT((#289445,#289450)); +#289445 = SURFACE_STYLE_USAGE(.BOTH.,#289446); +#289446 = SURFACE_SIDE_STYLE('',(#289447)); +#289447 = SURFACE_STYLE_FILL_AREA(#289448); +#289448 = FILL_AREA_STYLE('',(#289449)); +#289449 = FILL_AREA_STYLE_COLOUR('',#280691); +#289450 = CURVE_STYLE('',#289451,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289452 = STYLED_ITEM('color',(#289453),#123024); +#289453 = PRESENTATION_STYLE_ASSIGNMENT((#289454,#289459)); +#289454 = SURFACE_STYLE_USAGE(.BOTH.,#289455); +#289455 = SURFACE_SIDE_STYLE('',(#289456)); +#289456 = SURFACE_STYLE_FILL_AREA(#289457); +#289457 = FILL_AREA_STYLE('',(#289458)); +#289458 = FILL_AREA_STYLE_COLOUR('',#280691); +#289459 = CURVE_STYLE('',#289460,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#289460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289461 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #289462,#289469,#289476,#289483,#289490,#289497,#289504,#289511, + #289518,#289525,#289532,#289539,#289546,#289553,#289560,#289567, + #289574,#289581,#289588,#289595,#289602,#289609,#289616,#289623, + #289630,#289637,#289644,#289651,#289658,#289665,#289672,#289679, + #289686,#289693,#289700,#289707,#289714,#289721,#289728,#289735, + #289742,#289749,#289756,#289763,#289770,#289777,#289784,#289791, + #289798,#289805,#289812,#289819,#289826,#289833,#289840,#289847, + #289854,#289861,#289868,#289875,#289882,#289889,#289896,#289903, + #289910,#289917,#289924,#289931,#289938,#289945,#289952,#289959, + #289966,#289973,#289980,#289987,#289994,#290001,#290008,#290015, + #290022,#290029,#290036,#290043,#290050,#290057,#290064,#290071, + #290078,#290085,#290092,#290099,#290106,#290113,#290120,#290127, + #290134,#290141,#290148,#290155,#290162,#290169,#290176,#290183, + #290190,#290197,#290204,#290211,#290218,#290225,#290232,#290239, + #290246,#290253,#290260,#290267,#290274,#290281,#290288,#290295, + #290302,#290309,#290316,#290323,#290330,#290337,#290344,#290351, + #290358,#290365,#290372,#290379,#290386,#290393,#290400,#290407, + #290414,#290421,#290428,#290435,#290442),#10397); +#289462 = STYLED_ITEM('color',(#289463),#6204); +#289463 = PRESENTATION_STYLE_ASSIGNMENT((#289464)); +#289464 = SURFACE_STYLE_USAGE(.BOTH.,#289465); +#289465 = SURFACE_SIDE_STYLE('',(#289466)); +#289466 = SURFACE_STYLE_FILL_AREA(#289467); +#289467 = FILL_AREA_STYLE('',(#289468)); +#289468 = FILL_AREA_STYLE_COLOUR('',#283551); +#289469 = STYLED_ITEM('color',(#289470),#6276); +#289470 = PRESENTATION_STYLE_ASSIGNMENT((#289471)); +#289471 = SURFACE_STYLE_USAGE(.BOTH.,#289472); +#289472 = SURFACE_SIDE_STYLE('',(#289473)); +#289473 = SURFACE_STYLE_FILL_AREA(#289474); +#289474 = FILL_AREA_STYLE('',(#289475)); +#289475 = FILL_AREA_STYLE_COLOUR('',#283551); +#289476 = STYLED_ITEM('color',(#289477),#6315); +#289477 = PRESENTATION_STYLE_ASSIGNMENT((#289478)); +#289478 = SURFACE_STYLE_USAGE(.BOTH.,#289479); +#289479 = SURFACE_SIDE_STYLE('',(#289480)); +#289480 = SURFACE_STYLE_FILL_AREA(#289481); +#289481 = FILL_AREA_STYLE('',(#289482)); +#289482 = FILL_AREA_STYLE_COLOUR('',#283551); +#289483 = STYLED_ITEM('color',(#289484),#6339); +#289484 = PRESENTATION_STYLE_ASSIGNMENT((#289485)); +#289485 = SURFACE_STYLE_USAGE(.BOTH.,#289486); +#289486 = SURFACE_SIDE_STYLE('',(#289487)); +#289487 = SURFACE_STYLE_FILL_AREA(#289488); +#289488 = FILL_AREA_STYLE('',(#289489)); +#289489 = FILL_AREA_STYLE_COLOUR('',#283551); +#289490 = STYLED_ITEM('color',(#289491),#6404); +#289491 = PRESENTATION_STYLE_ASSIGNMENT((#289492)); +#289492 = SURFACE_STYLE_USAGE(.BOTH.,#289493); +#289493 = SURFACE_SIDE_STYLE('',(#289494)); +#289494 = SURFACE_STYLE_FILL_AREA(#289495); +#289495 = FILL_AREA_STYLE('',(#289496)); +#289496 = FILL_AREA_STYLE_COLOUR('',#283551); +#289497 = STYLED_ITEM('color',(#289498),#6428); +#289498 = PRESENTATION_STYLE_ASSIGNMENT((#289499)); +#289499 = SURFACE_STYLE_USAGE(.BOTH.,#289500); +#289500 = SURFACE_SIDE_STYLE('',(#289501)); +#289501 = SURFACE_STYLE_FILL_AREA(#289502); +#289502 = FILL_AREA_STYLE('',(#289503)); +#289503 = FILL_AREA_STYLE_COLOUR('',#283551); +#289504 = STYLED_ITEM('color',(#289505),#6580); +#289505 = PRESENTATION_STYLE_ASSIGNMENT((#289506)); +#289506 = SURFACE_STYLE_USAGE(.BOTH.,#289507); +#289507 = SURFACE_SIDE_STYLE('',(#289508)); +#289508 = SURFACE_STYLE_FILL_AREA(#289509); +#289509 = FILL_AREA_STYLE('',(#289510)); +#289510 = FILL_AREA_STYLE_COLOUR('',#283551); +#289511 = STYLED_ITEM('color',(#289512),#6604); +#289512 = PRESENTATION_STYLE_ASSIGNMENT((#289513)); +#289513 = SURFACE_STYLE_USAGE(.BOTH.,#289514); +#289514 = SURFACE_SIDE_STYLE('',(#289515)); +#289515 = SURFACE_STYLE_FILL_AREA(#289516); +#289516 = FILL_AREA_STYLE('',(#289517)); +#289517 = FILL_AREA_STYLE_COLOUR('',#283551); +#289518 = STYLED_ITEM('color',(#289519),#6669); +#289519 = PRESENTATION_STYLE_ASSIGNMENT((#289520)); +#289520 = SURFACE_STYLE_USAGE(.BOTH.,#289521); +#289521 = SURFACE_SIDE_STYLE('',(#289522)); +#289522 = SURFACE_STYLE_FILL_AREA(#289523); +#289523 = FILL_AREA_STYLE('',(#289524)); +#289524 = FILL_AREA_STYLE_COLOUR('',#283551); +#289525 = STYLED_ITEM('color',(#289526),#6694); +#289526 = PRESENTATION_STYLE_ASSIGNMENT((#289527)); +#289527 = SURFACE_STYLE_USAGE(.BOTH.,#289528); +#289528 = SURFACE_SIDE_STYLE('',(#289529)); +#289529 = SURFACE_STYLE_FILL_AREA(#289530); +#289530 = FILL_AREA_STYLE('',(#289531)); +#289531 = FILL_AREA_STYLE_COLOUR('',#283551); +#289532 = STYLED_ITEM('color',(#289533),#6743); +#289533 = PRESENTATION_STYLE_ASSIGNMENT((#289534)); +#289534 = SURFACE_STYLE_USAGE(.BOTH.,#289535); +#289535 = SURFACE_SIDE_STYLE('',(#289536)); +#289536 = SURFACE_STYLE_FILL_AREA(#289537); +#289537 = FILL_AREA_STYLE('',(#289538)); +#289538 = FILL_AREA_STYLE_COLOUR('',#283551); +#289539 = STYLED_ITEM('color',(#289540),#6760); +#289540 = PRESENTATION_STYLE_ASSIGNMENT((#289541)); +#289541 = SURFACE_STYLE_USAGE(.BOTH.,#289542); +#289542 = SURFACE_SIDE_STYLE('',(#289543)); +#289543 = SURFACE_STYLE_FILL_AREA(#289544); +#289544 = FILL_AREA_STYLE('',(#289545)); +#289545 = FILL_AREA_STYLE_COLOUR('',#283551); +#289546 = STYLED_ITEM('color',(#289547),#6784); +#289547 = PRESENTATION_STYLE_ASSIGNMENT((#289548)); +#289548 = SURFACE_STYLE_USAGE(.BOTH.,#289549); +#289549 = SURFACE_SIDE_STYLE('',(#289550)); +#289550 = SURFACE_STYLE_FILL_AREA(#289551); +#289551 = FILL_AREA_STYLE('',(#289552)); +#289552 = FILL_AREA_STYLE_COLOUR('',#283551); +#289553 = STYLED_ITEM('color',(#289554),#6801); +#289554 = PRESENTATION_STYLE_ASSIGNMENT((#289555)); +#289555 = SURFACE_STYLE_USAGE(.BOTH.,#289556); +#289556 = SURFACE_SIDE_STYLE('',(#289557)); +#289557 = SURFACE_STYLE_FILL_AREA(#289558); +#289558 = FILL_AREA_STYLE('',(#289559)); +#289559 = FILL_AREA_STYLE_COLOUR('',#283551); +#289560 = STYLED_ITEM('color',(#289561),#6971); +#289561 = PRESENTATION_STYLE_ASSIGNMENT((#289562)); +#289562 = SURFACE_STYLE_USAGE(.BOTH.,#289563); +#289563 = SURFACE_SIDE_STYLE('',(#289564)); +#289564 = SURFACE_STYLE_FILL_AREA(#289565); +#289565 = FILL_AREA_STYLE('',(#289566)); +#289566 = FILL_AREA_STYLE_COLOUR('',#283551); +#289567 = STYLED_ITEM('color',(#289568),#6995); +#289568 = PRESENTATION_STYLE_ASSIGNMENT((#289569)); +#289569 = SURFACE_STYLE_USAGE(.BOTH.,#289570); +#289570 = SURFACE_SIDE_STYLE('',(#289571)); +#289571 = SURFACE_STYLE_FILL_AREA(#289572); +#289572 = FILL_AREA_STYLE('',(#289573)); +#289573 = FILL_AREA_STYLE_COLOUR('',#283551); +#289574 = STYLED_ITEM('color',(#289575),#7261); +#289575 = PRESENTATION_STYLE_ASSIGNMENT((#289576)); +#289576 = SURFACE_STYLE_USAGE(.BOTH.,#289577); +#289577 = SURFACE_SIDE_STYLE('',(#289578)); +#289578 = SURFACE_STYLE_FILL_AREA(#289579); +#289579 = FILL_AREA_STYLE('',(#289580)); +#289580 = FILL_AREA_STYLE_COLOUR('',#283551); +#289581 = STYLED_ITEM('color',(#289582),#7285); +#289582 = PRESENTATION_STYLE_ASSIGNMENT((#289583)); +#289583 = SURFACE_STYLE_USAGE(.BOTH.,#289584); +#289584 = SURFACE_SIDE_STYLE('',(#289585)); +#289585 = SURFACE_STYLE_FILL_AREA(#289586); +#289586 = FILL_AREA_STYLE('',(#289587)); +#289587 = FILL_AREA_STYLE_COLOUR('',#283551); +#289588 = STYLED_ITEM('color',(#289589),#7318); +#289589 = PRESENTATION_STYLE_ASSIGNMENT((#289590)); +#289590 = SURFACE_STYLE_USAGE(.BOTH.,#289591); +#289591 = SURFACE_SIDE_STYLE('',(#289592)); +#289592 = SURFACE_STYLE_FILL_AREA(#289593); +#289593 = FILL_AREA_STYLE('',(#289594)); +#289594 = FILL_AREA_STYLE_COLOUR('',#283551); +#289595 = STYLED_ITEM('color',(#289596),#7342); +#289596 = PRESENTATION_STYLE_ASSIGNMENT((#289597)); +#289597 = SURFACE_STYLE_USAGE(.BOTH.,#289598); +#289598 = SURFACE_SIDE_STYLE('',(#289599)); +#289599 = SURFACE_STYLE_FILL_AREA(#289600); +#289600 = FILL_AREA_STYLE('',(#289601)); +#289601 = FILL_AREA_STYLE_COLOUR('',#283551); +#289602 = STYLED_ITEM('color',(#289603),#7373); +#289603 = PRESENTATION_STYLE_ASSIGNMENT((#289604)); +#289604 = SURFACE_STYLE_USAGE(.BOTH.,#289605); +#289605 = SURFACE_SIDE_STYLE('',(#289606)); +#289606 = SURFACE_STYLE_FILL_AREA(#289607); +#289607 = FILL_AREA_STYLE('',(#289608)); +#289608 = FILL_AREA_STYLE_COLOUR('',#283551); +#289609 = STYLED_ITEM('color',(#289610),#7390); +#289610 = PRESENTATION_STYLE_ASSIGNMENT((#289611)); +#289611 = SURFACE_STYLE_USAGE(.BOTH.,#289612); +#289612 = SURFACE_SIDE_STYLE('',(#289613)); +#289613 = SURFACE_STYLE_FILL_AREA(#289614); +#289614 = FILL_AREA_STYLE('',(#289615)); +#289615 = FILL_AREA_STYLE_COLOUR('',#283551); +#289616 = STYLED_ITEM('color',(#289617),#7423); +#289617 = PRESENTATION_STYLE_ASSIGNMENT((#289618)); +#289618 = SURFACE_STYLE_USAGE(.BOTH.,#289619); +#289619 = SURFACE_SIDE_STYLE('',(#289620)); +#289620 = SURFACE_STYLE_FILL_AREA(#289621); +#289621 = FILL_AREA_STYLE('',(#289622)); +#289622 = FILL_AREA_STYLE_COLOUR('',#283551); +#289623 = STYLED_ITEM('color',(#289624),#7447); +#289624 = PRESENTATION_STYLE_ASSIGNMENT((#289625)); +#289625 = SURFACE_STYLE_USAGE(.BOTH.,#289626); +#289626 = SURFACE_SIDE_STYLE('',(#289627)); +#289627 = SURFACE_STYLE_FILL_AREA(#289628); +#289628 = FILL_AREA_STYLE('',(#289629)); +#289629 = FILL_AREA_STYLE_COLOUR('',#283551); +#289630 = STYLED_ITEM('color',(#289631),#7478); +#289631 = PRESENTATION_STYLE_ASSIGNMENT((#289632)); +#289632 = SURFACE_STYLE_USAGE(.BOTH.,#289633); +#289633 = SURFACE_SIDE_STYLE('',(#289634)); +#289634 = SURFACE_STYLE_FILL_AREA(#289635); +#289635 = FILL_AREA_STYLE('',(#289636)); +#289636 = FILL_AREA_STYLE_COLOUR('',#283551); +#289637 = STYLED_ITEM('color',(#289638),#7495); +#289638 = PRESENTATION_STYLE_ASSIGNMENT((#289639)); +#289639 = SURFACE_STYLE_USAGE(.BOTH.,#289640); +#289640 = SURFACE_SIDE_STYLE('',(#289641)); +#289641 = SURFACE_STYLE_FILL_AREA(#289642); +#289642 = FILL_AREA_STYLE('',(#289643)); +#289643 = FILL_AREA_STYLE_COLOUR('',#283551); +#289644 = STYLED_ITEM('color',(#289645),#7528); +#289645 = PRESENTATION_STYLE_ASSIGNMENT((#289646)); +#289646 = SURFACE_STYLE_USAGE(.BOTH.,#289647); +#289647 = SURFACE_SIDE_STYLE('',(#289648)); +#289648 = SURFACE_STYLE_FILL_AREA(#289649); +#289649 = FILL_AREA_STYLE('',(#289650)); +#289650 = FILL_AREA_STYLE_COLOUR('',#283551); +#289651 = STYLED_ITEM('color',(#289652),#7552); +#289652 = PRESENTATION_STYLE_ASSIGNMENT((#289653)); +#289653 = SURFACE_STYLE_USAGE(.BOTH.,#289654); +#289654 = SURFACE_SIDE_STYLE('',(#289655)); +#289655 = SURFACE_STYLE_FILL_AREA(#289656); +#289656 = FILL_AREA_STYLE('',(#289657)); +#289657 = FILL_AREA_STYLE_COLOUR('',#283551); +#289658 = STYLED_ITEM('color',(#289659),#7583); +#289659 = PRESENTATION_STYLE_ASSIGNMENT((#289660)); +#289660 = SURFACE_STYLE_USAGE(.BOTH.,#289661); +#289661 = SURFACE_SIDE_STYLE('',(#289662)); +#289662 = SURFACE_STYLE_FILL_AREA(#289663); +#289663 = FILL_AREA_STYLE('',(#289664)); +#289664 = FILL_AREA_STYLE_COLOUR('',#283551); +#289665 = STYLED_ITEM('color',(#289666),#7600); +#289666 = PRESENTATION_STYLE_ASSIGNMENT((#289667)); +#289667 = SURFACE_STYLE_USAGE(.BOTH.,#289668); +#289668 = SURFACE_SIDE_STYLE('',(#289669)); +#289669 = SURFACE_STYLE_FILL_AREA(#289670); +#289670 = FILL_AREA_STYLE('',(#289671)); +#289671 = FILL_AREA_STYLE_COLOUR('',#283551); +#289672 = STYLED_ITEM('color',(#289673),#7633); +#289673 = PRESENTATION_STYLE_ASSIGNMENT((#289674)); +#289674 = SURFACE_STYLE_USAGE(.BOTH.,#289675); +#289675 = SURFACE_SIDE_STYLE('',(#289676)); +#289676 = SURFACE_STYLE_FILL_AREA(#289677); +#289677 = FILL_AREA_STYLE('',(#289678)); +#289678 = FILL_AREA_STYLE_COLOUR('',#283551); +#289679 = STYLED_ITEM('color',(#289680),#7657); +#289680 = PRESENTATION_STYLE_ASSIGNMENT((#289681)); +#289681 = SURFACE_STYLE_USAGE(.BOTH.,#289682); +#289682 = SURFACE_SIDE_STYLE('',(#289683)); +#289683 = SURFACE_STYLE_FILL_AREA(#289684); +#289684 = FILL_AREA_STYLE('',(#289685)); +#289685 = FILL_AREA_STYLE_COLOUR('',#283551); +#289686 = STYLED_ITEM('color',(#289687),#7688); +#289687 = PRESENTATION_STYLE_ASSIGNMENT((#289688)); +#289688 = SURFACE_STYLE_USAGE(.BOTH.,#289689); +#289689 = SURFACE_SIDE_STYLE('',(#289690)); +#289690 = SURFACE_STYLE_FILL_AREA(#289691); +#289691 = FILL_AREA_STYLE('',(#289692)); +#289692 = FILL_AREA_STYLE_COLOUR('',#283551); +#289693 = STYLED_ITEM('color',(#289694),#7700); +#289694 = PRESENTATION_STYLE_ASSIGNMENT((#289695)); +#289695 = SURFACE_STYLE_USAGE(.BOTH.,#289696); +#289696 = SURFACE_SIDE_STYLE('',(#289697)); +#289697 = SURFACE_STYLE_FILL_AREA(#289698); +#289698 = FILL_AREA_STYLE('',(#289699)); +#289699 = FILL_AREA_STYLE_COLOUR('',#283551); +#289700 = STYLED_ITEM('color',(#289701),#7733); +#289701 = PRESENTATION_STYLE_ASSIGNMENT((#289702)); +#289702 = SURFACE_STYLE_USAGE(.BOTH.,#289703); +#289703 = SURFACE_SIDE_STYLE('',(#289704)); +#289704 = SURFACE_STYLE_FILL_AREA(#289705); +#289705 = FILL_AREA_STYLE('',(#289706)); +#289706 = FILL_AREA_STYLE_COLOUR('',#283551); +#289707 = STYLED_ITEM('color',(#289708),#7750); +#289708 = PRESENTATION_STYLE_ASSIGNMENT((#289709)); +#289709 = SURFACE_STYLE_USAGE(.BOTH.,#289710); +#289710 = SURFACE_SIDE_STYLE('',(#289711)); +#289711 = SURFACE_STYLE_FILL_AREA(#289712); +#289712 = FILL_AREA_STYLE('',(#289713)); +#289713 = FILL_AREA_STYLE_COLOUR('',#283551); +#289714 = STYLED_ITEM('color',(#289715),#7767); +#289715 = PRESENTATION_STYLE_ASSIGNMENT((#289716)); +#289716 = SURFACE_STYLE_USAGE(.BOTH.,#289717); +#289717 = SURFACE_SIDE_STYLE('',(#289718)); +#289718 = SURFACE_STYLE_FILL_AREA(#289719); +#289719 = FILL_AREA_STYLE('',(#289720)); +#289720 = FILL_AREA_STYLE_COLOUR('',#283551); +#289721 = STYLED_ITEM('color',(#289722),#7779); +#289722 = PRESENTATION_STYLE_ASSIGNMENT((#289723)); +#289723 = SURFACE_STYLE_USAGE(.BOTH.,#289724); +#289724 = SURFACE_SIDE_STYLE('',(#289725)); +#289725 = SURFACE_STYLE_FILL_AREA(#289726); +#289726 = FILL_AREA_STYLE('',(#289727)); +#289727 = FILL_AREA_STYLE_COLOUR('',#283551); +#289728 = STYLED_ITEM('color',(#289729),#7927); +#289729 = PRESENTATION_STYLE_ASSIGNMENT((#289730)); +#289730 = SURFACE_STYLE_USAGE(.BOTH.,#289731); +#289731 = SURFACE_SIDE_STYLE('',(#289732)); +#289732 = SURFACE_STYLE_FILL_AREA(#289733); +#289733 = FILL_AREA_STYLE('',(#289734)); +#289734 = FILL_AREA_STYLE_COLOUR('',#283551); +#289735 = STYLED_ITEM('color',(#289736),#7944); +#289736 = PRESENTATION_STYLE_ASSIGNMENT((#289737)); +#289737 = SURFACE_STYLE_USAGE(.BOTH.,#289738); +#289738 = SURFACE_SIDE_STYLE('',(#289739)); +#289739 = SURFACE_STYLE_FILL_AREA(#289740); +#289740 = FILL_AREA_STYLE('',(#289741)); +#289741 = FILL_AREA_STYLE_COLOUR('',#283551); +#289742 = STYLED_ITEM('color',(#289743),#7961); +#289743 = PRESENTATION_STYLE_ASSIGNMENT((#289744)); +#289744 = SURFACE_STYLE_USAGE(.BOTH.,#289745); +#289745 = SURFACE_SIDE_STYLE('',(#289746)); +#289746 = SURFACE_STYLE_FILL_AREA(#289747); +#289747 = FILL_AREA_STYLE('',(#289748)); +#289748 = FILL_AREA_STYLE_COLOUR('',#283551); +#289749 = STYLED_ITEM('color',(#289750),#7978); +#289750 = PRESENTATION_STYLE_ASSIGNMENT((#289751)); +#289751 = SURFACE_STYLE_USAGE(.BOTH.,#289752); +#289752 = SURFACE_SIDE_STYLE('',(#289753)); +#289753 = SURFACE_STYLE_FILL_AREA(#289754); +#289754 = FILL_AREA_STYLE('',(#289755)); +#289755 = FILL_AREA_STYLE_COLOUR('',#283551); +#289756 = STYLED_ITEM('color',(#289757),#7995); +#289757 = PRESENTATION_STYLE_ASSIGNMENT((#289758)); +#289758 = SURFACE_STYLE_USAGE(.BOTH.,#289759); +#289759 = SURFACE_SIDE_STYLE('',(#289760)); +#289760 = SURFACE_STYLE_FILL_AREA(#289761); +#289761 = FILL_AREA_STYLE('',(#289762)); +#289762 = FILL_AREA_STYLE_COLOUR('',#283551); +#289763 = STYLED_ITEM('color',(#289764),#8012); +#289764 = PRESENTATION_STYLE_ASSIGNMENT((#289765)); +#289765 = SURFACE_STYLE_USAGE(.BOTH.,#289766); +#289766 = SURFACE_SIDE_STYLE('',(#289767)); +#289767 = SURFACE_STYLE_FILL_AREA(#289768); +#289768 = FILL_AREA_STYLE('',(#289769)); +#289769 = FILL_AREA_STYLE_COLOUR('',#283551); +#289770 = STYLED_ITEM('color',(#289771),#8029); +#289771 = PRESENTATION_STYLE_ASSIGNMENT((#289772)); +#289772 = SURFACE_STYLE_USAGE(.BOTH.,#289773); +#289773 = SURFACE_SIDE_STYLE('',(#289774)); +#289774 = SURFACE_STYLE_FILL_AREA(#289775); +#289775 = FILL_AREA_STYLE('',(#289776)); +#289776 = FILL_AREA_STYLE_COLOUR('',#283551); +#289777 = STYLED_ITEM('color',(#289778),#8046); +#289778 = PRESENTATION_STYLE_ASSIGNMENT((#289779)); +#289779 = SURFACE_STYLE_USAGE(.BOTH.,#289780); +#289780 = SURFACE_SIDE_STYLE('',(#289781)); +#289781 = SURFACE_STYLE_FILL_AREA(#289782); +#289782 = FILL_AREA_STYLE('',(#289783)); +#289783 = FILL_AREA_STYLE_COLOUR('',#283551); +#289784 = STYLED_ITEM('color',(#289785),#8063); +#289785 = PRESENTATION_STYLE_ASSIGNMENT((#289786)); +#289786 = SURFACE_STYLE_USAGE(.BOTH.,#289787); +#289787 = SURFACE_SIDE_STYLE('',(#289788)); +#289788 = SURFACE_STYLE_FILL_AREA(#289789); +#289789 = FILL_AREA_STYLE('',(#289790)); +#289790 = FILL_AREA_STYLE_COLOUR('',#283551); +#289791 = STYLED_ITEM('color',(#289792),#8080); +#289792 = PRESENTATION_STYLE_ASSIGNMENT((#289793)); +#289793 = SURFACE_STYLE_USAGE(.BOTH.,#289794); +#289794 = SURFACE_SIDE_STYLE('',(#289795)); +#289795 = SURFACE_STYLE_FILL_AREA(#289796); +#289796 = FILL_AREA_STYLE('',(#289797)); +#289797 = FILL_AREA_STYLE_COLOUR('',#283551); +#289798 = STYLED_ITEM('color',(#289799),#8097); +#289799 = PRESENTATION_STYLE_ASSIGNMENT((#289800)); +#289800 = SURFACE_STYLE_USAGE(.BOTH.,#289801); +#289801 = SURFACE_SIDE_STYLE('',(#289802)); +#289802 = SURFACE_STYLE_FILL_AREA(#289803); +#289803 = FILL_AREA_STYLE('',(#289804)); +#289804 = FILL_AREA_STYLE_COLOUR('',#283551); +#289805 = STYLED_ITEM('color',(#289806),#8114); +#289806 = PRESENTATION_STYLE_ASSIGNMENT((#289807)); +#289807 = SURFACE_STYLE_USAGE(.BOTH.,#289808); +#289808 = SURFACE_SIDE_STYLE('',(#289809)); +#289809 = SURFACE_STYLE_FILL_AREA(#289810); +#289810 = FILL_AREA_STYLE('',(#289811)); +#289811 = FILL_AREA_STYLE_COLOUR('',#283551); +#289812 = STYLED_ITEM('color',(#289813),#8131); +#289813 = PRESENTATION_STYLE_ASSIGNMENT((#289814)); +#289814 = SURFACE_STYLE_USAGE(.BOTH.,#289815); +#289815 = SURFACE_SIDE_STYLE('',(#289816)); +#289816 = SURFACE_STYLE_FILL_AREA(#289817); +#289817 = FILL_AREA_STYLE('',(#289818)); +#289818 = FILL_AREA_STYLE_COLOUR('',#283551); +#289819 = STYLED_ITEM('color',(#289820),#8148); +#289820 = PRESENTATION_STYLE_ASSIGNMENT((#289821)); +#289821 = SURFACE_STYLE_USAGE(.BOTH.,#289822); +#289822 = SURFACE_SIDE_STYLE('',(#289823)); +#289823 = SURFACE_STYLE_FILL_AREA(#289824); +#289824 = FILL_AREA_STYLE('',(#289825)); +#289825 = FILL_AREA_STYLE_COLOUR('',#283551); +#289826 = STYLED_ITEM('color',(#289827),#8165); +#289827 = PRESENTATION_STYLE_ASSIGNMENT((#289828)); +#289828 = SURFACE_STYLE_USAGE(.BOTH.,#289829); +#289829 = SURFACE_SIDE_STYLE('',(#289830)); +#289830 = SURFACE_STYLE_FILL_AREA(#289831); +#289831 = FILL_AREA_STYLE('',(#289832)); +#289832 = FILL_AREA_STYLE_COLOUR('',#283551); +#289833 = STYLED_ITEM('color',(#289834),#8177); +#289834 = PRESENTATION_STYLE_ASSIGNMENT((#289835)); +#289835 = SURFACE_STYLE_USAGE(.BOTH.,#289836); +#289836 = SURFACE_SIDE_STYLE('',(#289837)); +#289837 = SURFACE_STYLE_FILL_AREA(#289838); +#289838 = FILL_AREA_STYLE('',(#289839)); +#289839 = FILL_AREA_STYLE_COLOUR('',#283551); +#289840 = STYLED_ITEM('color',(#289841),#8194); +#289841 = PRESENTATION_STYLE_ASSIGNMENT((#289842)); +#289842 = SURFACE_STYLE_USAGE(.BOTH.,#289843); +#289843 = SURFACE_SIDE_STYLE('',(#289844)); +#289844 = SURFACE_STYLE_FILL_AREA(#289845); +#289845 = FILL_AREA_STYLE('',(#289846)); +#289846 = FILL_AREA_STYLE_COLOUR('',#283551); +#289847 = STYLED_ITEM('color',(#289848),#8211); +#289848 = PRESENTATION_STYLE_ASSIGNMENT((#289849)); +#289849 = SURFACE_STYLE_USAGE(.BOTH.,#289850); +#289850 = SURFACE_SIDE_STYLE('',(#289851)); +#289851 = SURFACE_STYLE_FILL_AREA(#289852); +#289852 = FILL_AREA_STYLE('',(#289853)); +#289853 = FILL_AREA_STYLE_COLOUR('',#283551); +#289854 = STYLED_ITEM('color',(#289855),#8228); +#289855 = PRESENTATION_STYLE_ASSIGNMENT((#289856)); +#289856 = SURFACE_STYLE_USAGE(.BOTH.,#289857); +#289857 = SURFACE_SIDE_STYLE('',(#289858)); +#289858 = SURFACE_STYLE_FILL_AREA(#289859); +#289859 = FILL_AREA_STYLE('',(#289860)); +#289860 = FILL_AREA_STYLE_COLOUR('',#283551); +#289861 = STYLED_ITEM('color',(#289862),#8245); +#289862 = PRESENTATION_STYLE_ASSIGNMENT((#289863)); +#289863 = SURFACE_STYLE_USAGE(.BOTH.,#289864); +#289864 = SURFACE_SIDE_STYLE('',(#289865)); +#289865 = SURFACE_STYLE_FILL_AREA(#289866); +#289866 = FILL_AREA_STYLE('',(#289867)); +#289867 = FILL_AREA_STYLE_COLOUR('',#283551); +#289868 = STYLED_ITEM('color',(#289869),#8291); +#289869 = PRESENTATION_STYLE_ASSIGNMENT((#289870)); +#289870 = SURFACE_STYLE_USAGE(.BOTH.,#289871); +#289871 = SURFACE_SIDE_STYLE('',(#289872)); +#289872 = SURFACE_STYLE_FILL_AREA(#289873); +#289873 = FILL_AREA_STYLE('',(#289874)); +#289874 = FILL_AREA_STYLE_COLOUR('',#283551); +#289875 = STYLED_ITEM('color',(#289876),#8337); +#289876 = PRESENTATION_STYLE_ASSIGNMENT((#289877)); +#289877 = SURFACE_STYLE_USAGE(.BOTH.,#289878); +#289878 = SURFACE_SIDE_STYLE('',(#289879)); +#289879 = SURFACE_STYLE_FILL_AREA(#289880); +#289880 = FILL_AREA_STYLE('',(#289881)); +#289881 = FILL_AREA_STYLE_COLOUR('',#283551); +#289882 = STYLED_ITEM('color',(#289883),#8383); +#289883 = PRESENTATION_STYLE_ASSIGNMENT((#289884)); +#289884 = SURFACE_STYLE_USAGE(.BOTH.,#289885); +#289885 = SURFACE_SIDE_STYLE('',(#289886)); +#289886 = SURFACE_STYLE_FILL_AREA(#289887); +#289887 = FILL_AREA_STYLE('',(#289888)); +#289888 = FILL_AREA_STYLE_COLOUR('',#283551); +#289889 = STYLED_ITEM('color',(#289890),#8429); +#289890 = PRESENTATION_STYLE_ASSIGNMENT((#289891)); +#289891 = SURFACE_STYLE_USAGE(.BOTH.,#289892); +#289892 = SURFACE_SIDE_STYLE('',(#289893)); +#289893 = SURFACE_STYLE_FILL_AREA(#289894); +#289894 = FILL_AREA_STYLE('',(#289895)); +#289895 = FILL_AREA_STYLE_COLOUR('',#283937); +#289896 = STYLED_ITEM('color',(#289897),#8460); +#289897 = PRESENTATION_STYLE_ASSIGNMENT((#289898)); +#289898 = SURFACE_STYLE_USAGE(.BOTH.,#289899); +#289899 = SURFACE_SIDE_STYLE('',(#289900)); +#289900 = SURFACE_STYLE_FILL_AREA(#289901); +#289901 = FILL_AREA_STYLE('',(#289902)); +#289902 = FILL_AREA_STYLE_COLOUR('',#283937); +#289903 = STYLED_ITEM('color',(#289904),#8484); +#289904 = PRESENTATION_STYLE_ASSIGNMENT((#289905)); +#289905 = SURFACE_STYLE_USAGE(.BOTH.,#289906); +#289906 = SURFACE_SIDE_STYLE('',(#289907)); +#289907 = SURFACE_STYLE_FILL_AREA(#289908); +#289908 = FILL_AREA_STYLE('',(#289909)); +#289909 = FILL_AREA_STYLE_COLOUR('',#283937); +#289910 = STYLED_ITEM('color',(#289911),#8508); +#289911 = PRESENTATION_STYLE_ASSIGNMENT((#289912)); +#289912 = SURFACE_STYLE_USAGE(.BOTH.,#289913); +#289913 = SURFACE_SIDE_STYLE('',(#289914)); +#289914 = SURFACE_STYLE_FILL_AREA(#289915); +#289915 = FILL_AREA_STYLE('',(#289916)); +#289916 = FILL_AREA_STYLE_COLOUR('',#283937); +#289917 = STYLED_ITEM('color',(#289918),#8525); +#289918 = PRESENTATION_STYLE_ASSIGNMENT((#289919)); +#289919 = SURFACE_STYLE_USAGE(.BOTH.,#289920); +#289920 = SURFACE_SIDE_STYLE('',(#289921)); +#289921 = SURFACE_STYLE_FILL_AREA(#289922); +#289922 = FILL_AREA_STYLE('',(#289923)); +#289923 = FILL_AREA_STYLE_COLOUR('',#283937); +#289924 = STYLED_ITEM('color',(#289925),#8556); +#289925 = PRESENTATION_STYLE_ASSIGNMENT((#289926)); +#289926 = SURFACE_STYLE_USAGE(.BOTH.,#289927); +#289927 = SURFACE_SIDE_STYLE('',(#289928)); +#289928 = SURFACE_STYLE_FILL_AREA(#289929); +#289929 = FILL_AREA_STYLE('',(#289930)); +#289930 = FILL_AREA_STYLE_COLOUR('',#283937); +#289931 = STYLED_ITEM('color',(#289932),#8580); +#289932 = PRESENTATION_STYLE_ASSIGNMENT((#289933)); +#289933 = SURFACE_STYLE_USAGE(.BOTH.,#289934); +#289934 = SURFACE_SIDE_STYLE('',(#289935)); +#289935 = SURFACE_STYLE_FILL_AREA(#289936); +#289936 = FILL_AREA_STYLE('',(#289937)); +#289937 = FILL_AREA_STYLE_COLOUR('',#283937); +#289938 = STYLED_ITEM('color',(#289939),#8604); +#289939 = PRESENTATION_STYLE_ASSIGNMENT((#289940)); +#289940 = SURFACE_STYLE_USAGE(.BOTH.,#289941); +#289941 = SURFACE_SIDE_STYLE('',(#289942)); +#289942 = SURFACE_STYLE_FILL_AREA(#289943); +#289943 = FILL_AREA_STYLE('',(#289944)); +#289944 = FILL_AREA_STYLE_COLOUR('',#283937); +#289945 = STYLED_ITEM('color',(#289946),#8621); +#289946 = PRESENTATION_STYLE_ASSIGNMENT((#289947)); +#289947 = SURFACE_STYLE_USAGE(.BOTH.,#289948); +#289948 = SURFACE_SIDE_STYLE('',(#289949)); +#289949 = SURFACE_STYLE_FILL_AREA(#289950); +#289950 = FILL_AREA_STYLE('',(#289951)); +#289951 = FILL_AREA_STYLE_COLOUR('',#283937); +#289952 = STYLED_ITEM('color',(#289953),#8652); +#289953 = PRESENTATION_STYLE_ASSIGNMENT((#289954)); +#289954 = SURFACE_STYLE_USAGE(.BOTH.,#289955); +#289955 = SURFACE_SIDE_STYLE('',(#289956)); +#289956 = SURFACE_STYLE_FILL_AREA(#289957); +#289957 = FILL_AREA_STYLE('',(#289958)); +#289958 = FILL_AREA_STYLE_COLOUR('',#283937); +#289959 = STYLED_ITEM('color',(#289960),#8676); +#289960 = PRESENTATION_STYLE_ASSIGNMENT((#289961)); +#289961 = SURFACE_STYLE_USAGE(.BOTH.,#289962); +#289962 = SURFACE_SIDE_STYLE('',(#289963)); +#289963 = SURFACE_STYLE_FILL_AREA(#289964); +#289964 = FILL_AREA_STYLE('',(#289965)); +#289965 = FILL_AREA_STYLE_COLOUR('',#283937); +#289966 = STYLED_ITEM('color',(#289967),#8700); +#289967 = PRESENTATION_STYLE_ASSIGNMENT((#289968)); +#289968 = SURFACE_STYLE_USAGE(.BOTH.,#289969); +#289969 = SURFACE_SIDE_STYLE('',(#289970)); +#289970 = SURFACE_STYLE_FILL_AREA(#289971); +#289971 = FILL_AREA_STYLE('',(#289972)); +#289972 = FILL_AREA_STYLE_COLOUR('',#283937); +#289973 = STYLED_ITEM('color',(#289974),#8717); +#289974 = PRESENTATION_STYLE_ASSIGNMENT((#289975)); +#289975 = SURFACE_STYLE_USAGE(.BOTH.,#289976); +#289976 = SURFACE_SIDE_STYLE('',(#289977)); +#289977 = SURFACE_STYLE_FILL_AREA(#289978); +#289978 = FILL_AREA_STYLE('',(#289979)); +#289979 = FILL_AREA_STYLE_COLOUR('',#283937); +#289980 = STYLED_ITEM('color',(#289981),#8748); +#289981 = PRESENTATION_STYLE_ASSIGNMENT((#289982)); +#289982 = SURFACE_STYLE_USAGE(.BOTH.,#289983); +#289983 = SURFACE_SIDE_STYLE('',(#289984)); +#289984 = SURFACE_STYLE_FILL_AREA(#289985); +#289985 = FILL_AREA_STYLE('',(#289986)); +#289986 = FILL_AREA_STYLE_COLOUR('',#283937); +#289987 = STYLED_ITEM('color',(#289988),#8772); +#289988 = PRESENTATION_STYLE_ASSIGNMENT((#289989)); +#289989 = SURFACE_STYLE_USAGE(.BOTH.,#289990); +#289990 = SURFACE_SIDE_STYLE('',(#289991)); +#289991 = SURFACE_STYLE_FILL_AREA(#289992); +#289992 = FILL_AREA_STYLE('',(#289993)); +#289993 = FILL_AREA_STYLE_COLOUR('',#283937); +#289994 = STYLED_ITEM('color',(#289995),#8796); +#289995 = PRESENTATION_STYLE_ASSIGNMENT((#289996)); +#289996 = SURFACE_STYLE_USAGE(.BOTH.,#289997); +#289997 = SURFACE_SIDE_STYLE('',(#289998)); +#289998 = SURFACE_STYLE_FILL_AREA(#289999); +#289999 = FILL_AREA_STYLE('',(#290000)); +#290000 = FILL_AREA_STYLE_COLOUR('',#283937); +#290001 = STYLED_ITEM('color',(#290002),#8813); +#290002 = PRESENTATION_STYLE_ASSIGNMENT((#290003)); +#290003 = SURFACE_STYLE_USAGE(.BOTH.,#290004); +#290004 = SURFACE_SIDE_STYLE('',(#290005)); +#290005 = SURFACE_STYLE_FILL_AREA(#290006); +#290006 = FILL_AREA_STYLE('',(#290007)); +#290007 = FILL_AREA_STYLE_COLOUR('',#283937); +#290008 = STYLED_ITEM('color',(#290009),#8876); +#290009 = PRESENTATION_STYLE_ASSIGNMENT((#290010)); +#290010 = SURFACE_STYLE_USAGE(.BOTH.,#290011); +#290011 = SURFACE_SIDE_STYLE('',(#290012)); +#290012 = SURFACE_STYLE_FILL_AREA(#290013); +#290013 = FILL_AREA_STYLE('',(#290014)); +#290014 = FILL_AREA_STYLE_COLOUR('',#283937); +#290015 = STYLED_ITEM('color',(#290016),#8900); +#290016 = PRESENTATION_STYLE_ASSIGNMENT((#290017)); +#290017 = SURFACE_STYLE_USAGE(.BOTH.,#290018); +#290018 = SURFACE_SIDE_STYLE('',(#290019)); +#290019 = SURFACE_STYLE_FILL_AREA(#290020); +#290020 = FILL_AREA_STYLE('',(#290021)); +#290021 = FILL_AREA_STYLE_COLOUR('',#283937); +#290022 = STYLED_ITEM('color',(#290023),#8956); +#290023 = PRESENTATION_STYLE_ASSIGNMENT((#290024)); +#290024 = SURFACE_STYLE_USAGE(.BOTH.,#290025); +#290025 = SURFACE_SIDE_STYLE('',(#290026)); +#290026 = SURFACE_STYLE_FILL_AREA(#290027); +#290027 = FILL_AREA_STYLE('',(#290028)); +#290028 = FILL_AREA_STYLE_COLOUR('',#283937); +#290029 = STYLED_ITEM('color',(#290030),#8973); +#290030 = PRESENTATION_STYLE_ASSIGNMENT((#290031)); +#290031 = SURFACE_STYLE_USAGE(.BOTH.,#290032); +#290032 = SURFACE_SIDE_STYLE('',(#290033)); +#290033 = SURFACE_STYLE_FILL_AREA(#290034); +#290034 = FILL_AREA_STYLE('',(#290035)); +#290035 = FILL_AREA_STYLE_COLOUR('',#283937); +#290036 = STYLED_ITEM('color',(#290037),#9004); +#290037 = PRESENTATION_STYLE_ASSIGNMENT((#290038)); +#290038 = SURFACE_STYLE_USAGE(.BOTH.,#290039); +#290039 = SURFACE_SIDE_STYLE('',(#290040)); +#290040 = SURFACE_STYLE_FILL_AREA(#290041); +#290041 = FILL_AREA_STYLE('',(#290042)); +#290042 = FILL_AREA_STYLE_COLOUR('',#283937); +#290043 = STYLED_ITEM('color',(#290044),#9028); +#290044 = PRESENTATION_STYLE_ASSIGNMENT((#290045)); +#290045 = SURFACE_STYLE_USAGE(.BOTH.,#290046); +#290046 = SURFACE_SIDE_STYLE('',(#290047)); +#290047 = SURFACE_STYLE_FILL_AREA(#290048); +#290048 = FILL_AREA_STYLE('',(#290049)); +#290049 = FILL_AREA_STYLE_COLOUR('',#283937); +#290050 = STYLED_ITEM('color',(#290051),#9052); +#290051 = PRESENTATION_STYLE_ASSIGNMENT((#290052)); +#290052 = SURFACE_STYLE_USAGE(.BOTH.,#290053); +#290053 = SURFACE_SIDE_STYLE('',(#290054)); +#290054 = SURFACE_STYLE_FILL_AREA(#290055); +#290055 = FILL_AREA_STYLE('',(#290056)); +#290056 = FILL_AREA_STYLE_COLOUR('',#283937); +#290057 = STYLED_ITEM('color',(#290058),#9069); +#290058 = PRESENTATION_STYLE_ASSIGNMENT((#290059)); +#290059 = SURFACE_STYLE_USAGE(.BOTH.,#290060); +#290060 = SURFACE_SIDE_STYLE('',(#290061)); +#290061 = SURFACE_STYLE_FILL_AREA(#290062); +#290062 = FILL_AREA_STYLE('',(#290063)); +#290063 = FILL_AREA_STYLE_COLOUR('',#283937); +#290064 = STYLED_ITEM('color',(#290065),#9100); +#290065 = PRESENTATION_STYLE_ASSIGNMENT((#290066)); +#290066 = SURFACE_STYLE_USAGE(.BOTH.,#290067); +#290067 = SURFACE_SIDE_STYLE('',(#290068)); +#290068 = SURFACE_STYLE_FILL_AREA(#290069); +#290069 = FILL_AREA_STYLE('',(#290070)); +#290070 = FILL_AREA_STYLE_COLOUR('',#283937); +#290071 = STYLED_ITEM('color',(#290072),#9124); +#290072 = PRESENTATION_STYLE_ASSIGNMENT((#290073)); +#290073 = SURFACE_STYLE_USAGE(.BOTH.,#290074); +#290074 = SURFACE_SIDE_STYLE('',(#290075)); +#290075 = SURFACE_STYLE_FILL_AREA(#290076); +#290076 = FILL_AREA_STYLE('',(#290077)); +#290077 = FILL_AREA_STYLE_COLOUR('',#283937); +#290078 = STYLED_ITEM('color',(#290079),#9148); +#290079 = PRESENTATION_STYLE_ASSIGNMENT((#290080)); +#290080 = SURFACE_STYLE_USAGE(.BOTH.,#290081); +#290081 = SURFACE_SIDE_STYLE('',(#290082)); +#290082 = SURFACE_STYLE_FILL_AREA(#290083); +#290083 = FILL_AREA_STYLE('',(#290084)); +#290084 = FILL_AREA_STYLE_COLOUR('',#283937); +#290085 = STYLED_ITEM('color',(#290086),#9165); +#290086 = PRESENTATION_STYLE_ASSIGNMENT((#290087)); +#290087 = SURFACE_STYLE_USAGE(.BOTH.,#290088); +#290088 = SURFACE_SIDE_STYLE('',(#290089)); +#290089 = SURFACE_STYLE_FILL_AREA(#290090); +#290090 = FILL_AREA_STYLE('',(#290091)); +#290091 = FILL_AREA_STYLE_COLOUR('',#283937); +#290092 = STYLED_ITEM('color',(#290093),#9196); +#290093 = PRESENTATION_STYLE_ASSIGNMENT((#290094)); +#290094 = SURFACE_STYLE_USAGE(.BOTH.,#290095); +#290095 = SURFACE_SIDE_STYLE('',(#290096)); +#290096 = SURFACE_STYLE_FILL_AREA(#290097); +#290097 = FILL_AREA_STYLE('',(#290098)); +#290098 = FILL_AREA_STYLE_COLOUR('',#283937); +#290099 = STYLED_ITEM('color',(#290100),#9252); +#290100 = PRESENTATION_STYLE_ASSIGNMENT((#290101)); +#290101 = SURFACE_STYLE_USAGE(.BOTH.,#290102); +#290102 = SURFACE_SIDE_STYLE('',(#290103)); +#290103 = SURFACE_STYLE_FILL_AREA(#290104); +#290104 = FILL_AREA_STYLE('',(#290105)); +#290105 = FILL_AREA_STYLE_COLOUR('',#283937); +#290106 = STYLED_ITEM('color',(#290107),#9276); +#290107 = PRESENTATION_STYLE_ASSIGNMENT((#290108)); +#290108 = SURFACE_STYLE_USAGE(.BOTH.,#290109); +#290109 = SURFACE_SIDE_STYLE('',(#290110)); +#290110 = SURFACE_STYLE_FILL_AREA(#290111); +#290111 = FILL_AREA_STYLE('',(#290112)); +#290112 = FILL_AREA_STYLE_COLOUR('',#283937); +#290113 = STYLED_ITEM('color',(#290114),#9325); +#290114 = PRESENTATION_STYLE_ASSIGNMENT((#290115)); +#290115 = SURFACE_STYLE_USAGE(.BOTH.,#290116); +#290116 = SURFACE_SIDE_STYLE('',(#290117)); +#290117 = SURFACE_STYLE_FILL_AREA(#290118); +#290118 = FILL_AREA_STYLE('',(#290119)); +#290119 = FILL_AREA_STYLE_COLOUR('',#283937); +#290120 = STYLED_ITEM('color',(#290121),#9356); +#290121 = PRESENTATION_STYLE_ASSIGNMENT((#290122)); +#290122 = SURFACE_STYLE_USAGE(.BOTH.,#290123); +#290123 = SURFACE_SIDE_STYLE('',(#290124)); +#290124 = SURFACE_STYLE_FILL_AREA(#290125); +#290125 = FILL_AREA_STYLE('',(#290126)); +#290126 = FILL_AREA_STYLE_COLOUR('',#283937); +#290127 = STYLED_ITEM('color',(#290128),#9380); +#290128 = PRESENTATION_STYLE_ASSIGNMENT((#290129)); +#290129 = SURFACE_STYLE_USAGE(.BOTH.,#290130); +#290130 = SURFACE_SIDE_STYLE('',(#290131)); +#290131 = SURFACE_STYLE_FILL_AREA(#290132); +#290132 = FILL_AREA_STYLE('',(#290133)); +#290133 = FILL_AREA_STYLE_COLOUR('',#283937); +#290134 = STYLED_ITEM('color',(#290135),#9404); +#290135 = PRESENTATION_STYLE_ASSIGNMENT((#290136)); +#290136 = SURFACE_STYLE_USAGE(.BOTH.,#290137); +#290137 = SURFACE_SIDE_STYLE('',(#290138)); +#290138 = SURFACE_STYLE_FILL_AREA(#290139); +#290139 = FILL_AREA_STYLE('',(#290140)); +#290140 = FILL_AREA_STYLE_COLOUR('',#283937); +#290141 = STYLED_ITEM('color',(#290142),#9421); +#290142 = PRESENTATION_STYLE_ASSIGNMENT((#290143)); +#290143 = SURFACE_STYLE_USAGE(.BOTH.,#290144); +#290144 = SURFACE_SIDE_STYLE('',(#290145)); +#290145 = SURFACE_STYLE_FILL_AREA(#290146); +#290146 = FILL_AREA_STYLE('',(#290147)); +#290147 = FILL_AREA_STYLE_COLOUR('',#283937); +#290148 = STYLED_ITEM('color',(#290149),#9452); +#290149 = PRESENTATION_STYLE_ASSIGNMENT((#290150)); +#290150 = SURFACE_STYLE_USAGE(.BOTH.,#290151); +#290151 = SURFACE_SIDE_STYLE('',(#290152)); +#290152 = SURFACE_STYLE_FILL_AREA(#290153); +#290153 = FILL_AREA_STYLE('',(#290154)); +#290154 = FILL_AREA_STYLE_COLOUR('',#283937); +#290155 = STYLED_ITEM('color',(#290156),#9476); +#290156 = PRESENTATION_STYLE_ASSIGNMENT((#290157)); +#290157 = SURFACE_STYLE_USAGE(.BOTH.,#290158); +#290158 = SURFACE_SIDE_STYLE('',(#290159)); +#290159 = SURFACE_STYLE_FILL_AREA(#290160); +#290160 = FILL_AREA_STYLE('',(#290161)); +#290161 = FILL_AREA_STYLE_COLOUR('',#283937); +#290162 = STYLED_ITEM('color',(#290163),#9500); +#290163 = PRESENTATION_STYLE_ASSIGNMENT((#290164)); +#290164 = SURFACE_STYLE_USAGE(.BOTH.,#290165); +#290165 = SURFACE_SIDE_STYLE('',(#290166)); +#290166 = SURFACE_STYLE_FILL_AREA(#290167); +#290167 = FILL_AREA_STYLE('',(#290168)); +#290168 = FILL_AREA_STYLE_COLOUR('',#283937); +#290169 = STYLED_ITEM('color',(#290170),#9517); +#290170 = PRESENTATION_STYLE_ASSIGNMENT((#290171)); +#290171 = SURFACE_STYLE_USAGE(.BOTH.,#290172); +#290172 = SURFACE_SIDE_STYLE('',(#290173)); +#290173 = SURFACE_STYLE_FILL_AREA(#290174); +#290174 = FILL_AREA_STYLE('',(#290175)); +#290175 = FILL_AREA_STYLE_COLOUR('',#283937); +#290176 = STYLED_ITEM('color',(#290177),#9548); +#290177 = PRESENTATION_STYLE_ASSIGNMENT((#290178)); +#290178 = SURFACE_STYLE_USAGE(.BOTH.,#290179); +#290179 = SURFACE_SIDE_STYLE('',(#290180)); +#290180 = SURFACE_STYLE_FILL_AREA(#290181); +#290181 = FILL_AREA_STYLE('',(#290182)); +#290182 = FILL_AREA_STYLE_COLOUR('',#283937); +#290183 = STYLED_ITEM('color',(#290184),#9572); +#290184 = PRESENTATION_STYLE_ASSIGNMENT((#290185)); +#290185 = SURFACE_STYLE_USAGE(.BOTH.,#290186); +#290186 = SURFACE_SIDE_STYLE('',(#290187)); +#290187 = SURFACE_STYLE_FILL_AREA(#290188); +#290188 = FILL_AREA_STYLE('',(#290189)); +#290189 = FILL_AREA_STYLE_COLOUR('',#283937); +#290190 = STYLED_ITEM('color',(#290191),#9596); +#290191 = PRESENTATION_STYLE_ASSIGNMENT((#290192)); +#290192 = SURFACE_STYLE_USAGE(.BOTH.,#290193); +#290193 = SURFACE_SIDE_STYLE('',(#290194)); +#290194 = SURFACE_STYLE_FILL_AREA(#290195); +#290195 = FILL_AREA_STYLE('',(#290196)); +#290196 = FILL_AREA_STYLE_COLOUR('',#283937); +#290197 = STYLED_ITEM('color',(#290198),#9613); +#290198 = PRESENTATION_STYLE_ASSIGNMENT((#290199)); +#290199 = SURFACE_STYLE_USAGE(.BOTH.,#290200); +#290200 = SURFACE_SIDE_STYLE('',(#290201)); +#290201 = SURFACE_STYLE_FILL_AREA(#290202); +#290202 = FILL_AREA_STYLE('',(#290203)); +#290203 = FILL_AREA_STYLE_COLOUR('',#283937); +#290204 = STYLED_ITEM('color',(#290205),#9644); +#290205 = PRESENTATION_STYLE_ASSIGNMENT((#290206)); +#290206 = SURFACE_STYLE_USAGE(.BOTH.,#290207); +#290207 = SURFACE_SIDE_STYLE('',(#290208)); +#290208 = SURFACE_STYLE_FILL_AREA(#290209); +#290209 = FILL_AREA_STYLE('',(#290210)); +#290210 = FILL_AREA_STYLE_COLOUR('',#283937); +#290211 = STYLED_ITEM('color',(#290212),#9668); +#290212 = PRESENTATION_STYLE_ASSIGNMENT((#290213)); +#290213 = SURFACE_STYLE_USAGE(.BOTH.,#290214); +#290214 = SURFACE_SIDE_STYLE('',(#290215)); +#290215 = SURFACE_STYLE_FILL_AREA(#290216); +#290216 = FILL_AREA_STYLE('',(#290217)); +#290217 = FILL_AREA_STYLE_COLOUR('',#283937); +#290218 = STYLED_ITEM('color',(#290219),#9692); +#290219 = PRESENTATION_STYLE_ASSIGNMENT((#290220)); +#290220 = SURFACE_STYLE_USAGE(.BOTH.,#290221); +#290221 = SURFACE_SIDE_STYLE('',(#290222)); +#290222 = SURFACE_STYLE_FILL_AREA(#290223); +#290223 = FILL_AREA_STYLE('',(#290224)); +#290224 = FILL_AREA_STYLE_COLOUR('',#283937); +#290225 = STYLED_ITEM('color',(#290226),#9709); +#290226 = PRESENTATION_STYLE_ASSIGNMENT((#290227)); +#290227 = SURFACE_STYLE_USAGE(.BOTH.,#290228); +#290228 = SURFACE_SIDE_STYLE('',(#290229)); +#290229 = SURFACE_STYLE_FILL_AREA(#290230); +#290230 = FILL_AREA_STYLE('',(#290231)); +#290231 = FILL_AREA_STYLE_COLOUR('',#283937); +#290232 = STYLED_ITEM('color',(#290233),#9756); +#290233 = PRESENTATION_STYLE_ASSIGNMENT((#290234)); +#290234 = SURFACE_STYLE_USAGE(.BOTH.,#290235); +#290235 = SURFACE_SIDE_STYLE('',(#290236)); +#290236 = SURFACE_STYLE_FILL_AREA(#290237); +#290237 = FILL_AREA_STYLE('',(#290238)); +#290238 = FILL_AREA_STYLE_COLOUR('',#283937); +#290239 = STYLED_ITEM('color',(#290240),#9787); +#290240 = PRESENTATION_STYLE_ASSIGNMENT((#290241)); +#290241 = SURFACE_STYLE_USAGE(.BOTH.,#290242); +#290242 = SURFACE_SIDE_STYLE('',(#290243)); +#290243 = SURFACE_STYLE_FILL_AREA(#290244); +#290244 = FILL_AREA_STYLE('',(#290245)); +#290245 = FILL_AREA_STYLE_COLOUR('',#283937); +#290246 = STYLED_ITEM('color',(#290247),#9799); +#290247 = PRESENTATION_STYLE_ASSIGNMENT((#290248)); +#290248 = SURFACE_STYLE_USAGE(.BOTH.,#290249); +#290249 = SURFACE_SIDE_STYLE('',(#290250)); +#290250 = SURFACE_STYLE_FILL_AREA(#290251); +#290251 = FILL_AREA_STYLE('',(#290252)); +#290252 = FILL_AREA_STYLE_COLOUR('',#283937); +#290253 = STYLED_ITEM('color',(#290254),#9816); +#290254 = PRESENTATION_STYLE_ASSIGNMENT((#290255)); +#290255 = SURFACE_STYLE_USAGE(.BOTH.,#290256); +#290256 = SURFACE_SIDE_STYLE('',(#290257)); +#290257 = SURFACE_STYLE_FILL_AREA(#290258); +#290258 = FILL_AREA_STYLE('',(#290259)); +#290259 = FILL_AREA_STYLE_COLOUR('',#283937); +#290260 = STYLED_ITEM('color',(#290261),#9842); +#290261 = PRESENTATION_STYLE_ASSIGNMENT((#290262)); +#290262 = SURFACE_STYLE_USAGE(.BOTH.,#290263); +#290263 = SURFACE_SIDE_STYLE('',(#290264)); +#290264 = SURFACE_STYLE_FILL_AREA(#290265); +#290265 = FILL_AREA_STYLE('',(#290266)); +#290266 = FILL_AREA_STYLE_COLOUR('',#283937); +#290267 = STYLED_ITEM('color',(#290268),#9875); +#290268 = PRESENTATION_STYLE_ASSIGNMENT((#290269)); +#290269 = SURFACE_STYLE_USAGE(.BOTH.,#290270); +#290270 = SURFACE_SIDE_STYLE('',(#290271)); +#290271 = SURFACE_STYLE_FILL_AREA(#290272); +#290272 = FILL_AREA_STYLE('',(#290273)); +#290273 = FILL_AREA_STYLE_COLOUR('',#283937); +#290274 = STYLED_ITEM('color',(#290275),#9906); +#290275 = PRESENTATION_STYLE_ASSIGNMENT((#290276)); +#290276 = SURFACE_STYLE_USAGE(.BOTH.,#290277); +#290277 = SURFACE_SIDE_STYLE('',(#290278)); +#290278 = SURFACE_STYLE_FILL_AREA(#290279); +#290279 = FILL_AREA_STYLE('',(#290280)); +#290280 = FILL_AREA_STYLE_COLOUR('',#283937); +#290281 = STYLED_ITEM('color',(#290282),#9930); +#290282 = PRESENTATION_STYLE_ASSIGNMENT((#290283)); +#290283 = SURFACE_STYLE_USAGE(.BOTH.,#290284); +#290284 = SURFACE_SIDE_STYLE('',(#290285)); +#290285 = SURFACE_STYLE_FILL_AREA(#290286); +#290286 = FILL_AREA_STYLE('',(#290287)); +#290287 = FILL_AREA_STYLE_COLOUR('',#283937); +#290288 = STYLED_ITEM('color',(#290289),#9954); +#290289 = PRESENTATION_STYLE_ASSIGNMENT((#290290)); +#290290 = SURFACE_STYLE_USAGE(.BOTH.,#290291); +#290291 = SURFACE_SIDE_STYLE('',(#290292)); +#290292 = SURFACE_STYLE_FILL_AREA(#290293); +#290293 = FILL_AREA_STYLE('',(#290294)); +#290294 = FILL_AREA_STYLE_COLOUR('',#283937); +#290295 = STYLED_ITEM('color',(#290296),#9971); +#290296 = PRESENTATION_STYLE_ASSIGNMENT((#290297)); +#290297 = SURFACE_STYLE_USAGE(.BOTH.,#290298); +#290298 = SURFACE_SIDE_STYLE('',(#290299)); +#290299 = SURFACE_STYLE_FILL_AREA(#290300); +#290300 = FILL_AREA_STYLE('',(#290301)); +#290301 = FILL_AREA_STYLE_COLOUR('',#283937); +#290302 = STYLED_ITEM('color',(#290303),#10002); +#290303 = PRESENTATION_STYLE_ASSIGNMENT((#290304)); +#290304 = SURFACE_STYLE_USAGE(.BOTH.,#290305); +#290305 = SURFACE_SIDE_STYLE('',(#290306)); +#290306 = SURFACE_STYLE_FILL_AREA(#290307); +#290307 = FILL_AREA_STYLE('',(#290308)); +#290308 = FILL_AREA_STYLE_COLOUR('',#283937); +#290309 = STYLED_ITEM('color',(#290310),#10026); +#290310 = PRESENTATION_STYLE_ASSIGNMENT((#290311)); +#290311 = SURFACE_STYLE_USAGE(.BOTH.,#290312); +#290312 = SURFACE_SIDE_STYLE('',(#290313)); +#290313 = SURFACE_STYLE_FILL_AREA(#290314); +#290314 = FILL_AREA_STYLE('',(#290315)); +#290315 = FILL_AREA_STYLE_COLOUR('',#283937); +#290316 = STYLED_ITEM('color',(#290317),#10050); +#290317 = PRESENTATION_STYLE_ASSIGNMENT((#290318)); +#290318 = SURFACE_STYLE_USAGE(.BOTH.,#290319); +#290319 = SURFACE_SIDE_STYLE('',(#290320)); +#290320 = SURFACE_STYLE_FILL_AREA(#290321); +#290321 = FILL_AREA_STYLE('',(#290322)); +#290322 = FILL_AREA_STYLE_COLOUR('',#283937); +#290323 = STYLED_ITEM('color',(#290324),#10067); +#290324 = PRESENTATION_STYLE_ASSIGNMENT((#290325)); +#290325 = SURFACE_STYLE_USAGE(.BOTH.,#290326); +#290326 = SURFACE_SIDE_STYLE('',(#290327)); +#290327 = SURFACE_STYLE_FILL_AREA(#290328); +#290328 = FILL_AREA_STYLE('',(#290329)); +#290329 = FILL_AREA_STYLE_COLOUR('',#283937); +#290330 = STYLED_ITEM('color',(#290331),#10084); +#290331 = PRESENTATION_STYLE_ASSIGNMENT((#290332)); +#290332 = SURFACE_STYLE_USAGE(.BOTH.,#290333); +#290333 = SURFACE_SIDE_STYLE('',(#290334)); +#290334 = SURFACE_STYLE_FILL_AREA(#290335); +#290335 = FILL_AREA_STYLE('',(#290336)); +#290336 = FILL_AREA_STYLE_COLOUR('',#283937); +#290337 = STYLED_ITEM('color',(#290338),#10131); +#290338 = PRESENTATION_STYLE_ASSIGNMENT((#290339)); +#290339 = SURFACE_STYLE_USAGE(.BOTH.,#290340); +#290340 = SURFACE_SIDE_STYLE('',(#290341)); +#290341 = SURFACE_STYLE_FILL_AREA(#290342); +#290342 = FILL_AREA_STYLE('',(#290343)); +#290343 = FILL_AREA_STYLE_COLOUR('',#283937); +#290344 = STYLED_ITEM('color',(#290345),#10157); +#290345 = PRESENTATION_STYLE_ASSIGNMENT((#290346)); +#290346 = SURFACE_STYLE_USAGE(.BOTH.,#290347); +#290347 = SURFACE_SIDE_STYLE('',(#290348)); +#290348 = SURFACE_STYLE_FILL_AREA(#290349); +#290349 = FILL_AREA_STYLE('',(#290350)); +#290350 = FILL_AREA_STYLE_COLOUR('',#283937); +#290351 = STYLED_ITEM('color',(#290352),#10174); +#290352 = PRESENTATION_STYLE_ASSIGNMENT((#290353)); +#290353 = SURFACE_STYLE_USAGE(.BOTH.,#290354); +#290354 = SURFACE_SIDE_STYLE('',(#290355)); +#290355 = SURFACE_STYLE_FILL_AREA(#290356); +#290356 = FILL_AREA_STYLE('',(#290357)); +#290357 = FILL_AREA_STYLE_COLOUR('',#283937); +#290358 = STYLED_ITEM('color',(#290359),#10200); +#290359 = PRESENTATION_STYLE_ASSIGNMENT((#290360)); +#290360 = SURFACE_STYLE_USAGE(.BOTH.,#290361); +#290361 = SURFACE_SIDE_STYLE('',(#290362)); +#290362 = SURFACE_STYLE_FILL_AREA(#290363); +#290363 = FILL_AREA_STYLE('',(#290364)); +#290364 = FILL_AREA_STYLE_COLOUR('',#283937); +#290365 = STYLED_ITEM('color',(#290366),#10233); +#290366 = PRESENTATION_STYLE_ASSIGNMENT((#290367)); +#290367 = SURFACE_STYLE_USAGE(.BOTH.,#290368); +#290368 = SURFACE_SIDE_STYLE('',(#290369)); +#290369 = SURFACE_STYLE_FILL_AREA(#290370); +#290370 = FILL_AREA_STYLE('',(#290371)); +#290371 = FILL_AREA_STYLE_COLOUR('',#283937); +#290372 = STYLED_ITEM('color',(#290373),#10245); +#290373 = PRESENTATION_STYLE_ASSIGNMENT((#290374)); +#290374 = SURFACE_STYLE_USAGE(.BOTH.,#290375); +#290375 = SURFACE_SIDE_STYLE('',(#290376)); +#290376 = SURFACE_STYLE_FILL_AREA(#290377); +#290377 = FILL_AREA_STYLE('',(#290378)); +#290378 = FILL_AREA_STYLE_COLOUR('',#283937); +#290379 = STYLED_ITEM('color',(#290380),#10257); +#290380 = PRESENTATION_STYLE_ASSIGNMENT((#290381)); +#290381 = SURFACE_STYLE_USAGE(.BOTH.,#290382); +#290382 = SURFACE_SIDE_STYLE('',(#290383)); +#290383 = SURFACE_STYLE_FILL_AREA(#290384); +#290384 = FILL_AREA_STYLE('',(#290385)); +#290385 = FILL_AREA_STYLE_COLOUR('',#283937); +#290386 = STYLED_ITEM('color',(#290387),#10269); +#290387 = PRESENTATION_STYLE_ASSIGNMENT((#290388)); +#290388 = SURFACE_STYLE_USAGE(.BOTH.,#290389); +#290389 = SURFACE_SIDE_STYLE('',(#290390)); +#290390 = SURFACE_STYLE_FILL_AREA(#290391); +#290391 = FILL_AREA_STYLE('',(#290392)); +#290392 = FILL_AREA_STYLE_COLOUR('',#283937); +#290393 = STYLED_ITEM('color',(#290394),#10281); +#290394 = PRESENTATION_STYLE_ASSIGNMENT((#290395)); +#290395 = SURFACE_STYLE_USAGE(.BOTH.,#290396); +#290396 = SURFACE_SIDE_STYLE('',(#290397)); +#290397 = SURFACE_STYLE_FILL_AREA(#290398); +#290398 = FILL_AREA_STYLE('',(#290399)); +#290399 = FILL_AREA_STYLE_COLOUR('',#283937); +#290400 = STYLED_ITEM('color',(#290401),#10298); +#290401 = PRESENTATION_STYLE_ASSIGNMENT((#290402)); +#290402 = SURFACE_STYLE_USAGE(.BOTH.,#290403); +#290403 = SURFACE_SIDE_STYLE('',(#290404)); +#290404 = SURFACE_STYLE_FILL_AREA(#290405); +#290405 = FILL_AREA_STYLE('',(#290406)); +#290406 = FILL_AREA_STYLE_COLOUR('',#283937); +#290407 = STYLED_ITEM('color',(#290408),#10315); +#290408 = PRESENTATION_STYLE_ASSIGNMENT((#290409)); +#290409 = SURFACE_STYLE_USAGE(.BOTH.,#290410); +#290410 = SURFACE_SIDE_STYLE('',(#290411)); +#290411 = SURFACE_STYLE_FILL_AREA(#290412); +#290412 = FILL_AREA_STYLE('',(#290413)); +#290413 = FILL_AREA_STYLE_COLOUR('',#283937); +#290414 = STYLED_ITEM('color',(#290415),#10327); +#290415 = PRESENTATION_STYLE_ASSIGNMENT((#290416)); +#290416 = SURFACE_STYLE_USAGE(.BOTH.,#290417); +#290417 = SURFACE_SIDE_STYLE('',(#290418)); +#290418 = SURFACE_STYLE_FILL_AREA(#290419); +#290419 = FILL_AREA_STYLE('',(#290420)); +#290420 = FILL_AREA_STYLE_COLOUR('',#283937); +#290421 = STYLED_ITEM('color',(#290422),#10339); +#290422 = PRESENTATION_STYLE_ASSIGNMENT((#290423)); +#290423 = SURFACE_STYLE_USAGE(.BOTH.,#290424); +#290424 = SURFACE_SIDE_STYLE('',(#290425)); +#290425 = SURFACE_STYLE_FILL_AREA(#290426); +#290426 = FILL_AREA_STYLE('',(#290427)); +#290427 = FILL_AREA_STYLE_COLOUR('',#283937); +#290428 = STYLED_ITEM('color',(#290429),#10351); +#290429 = PRESENTATION_STYLE_ASSIGNMENT((#290430)); +#290430 = SURFACE_STYLE_USAGE(.BOTH.,#290431); +#290431 = SURFACE_SIDE_STYLE('',(#290432)); +#290432 = SURFACE_STYLE_FILL_AREA(#290433); +#290433 = FILL_AREA_STYLE('',(#290434)); +#290434 = FILL_AREA_STYLE_COLOUR('',#283937); +#290435 = STYLED_ITEM('color',(#290436),#10368); +#290436 = PRESENTATION_STYLE_ASSIGNMENT((#290437)); +#290437 = SURFACE_STYLE_USAGE(.BOTH.,#290438); +#290438 = SURFACE_SIDE_STYLE('',(#290439)); +#290439 = SURFACE_STYLE_FILL_AREA(#290440); +#290440 = FILL_AREA_STYLE('',(#290441)); +#290441 = FILL_AREA_STYLE_COLOUR('',#283937); +#290442 = STYLED_ITEM('color',(#290443),#10385); +#290443 = PRESENTATION_STYLE_ASSIGNMENT((#290444)); +#290444 = SURFACE_STYLE_USAGE(.BOTH.,#290445); +#290445 = SURFACE_SIDE_STYLE('',(#290446)); +#290446 = SURFACE_STYLE_FILL_AREA(#290447); +#290447 = FILL_AREA_STYLE('',(#290448)); +#290448 = FILL_AREA_STYLE_COLOUR('',#283937); +#290449 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #290450,#290459,#290468,#290477,#290486,#290495,#290504,#290513, + #290522,#290531,#290540,#290549,#290558,#290567,#290576,#290585, + #290594,#290603,#290612,#290621,#290630,#290639,#290648,#290657, + #290666,#290675,#290684,#290693,#290702,#290711,#290720,#290729, + #290738,#290747,#290756,#290765,#290774,#290783,#290792,#290801, + #290810,#290819,#290828,#290837,#290846,#290855,#290864,#290873, + #290882,#290891,#290900,#290909,#290918,#290927,#290936,#290945, + #290954,#290963,#290972,#290981,#290990,#290999,#291008,#291017, + #291026,#291035,#291044,#291053,#291062,#291071,#291080,#291089, + #291098,#291107,#291116,#291125,#291134,#291143,#291152,#291161, + #291170,#291179,#291188,#291197,#291206,#291215,#291224,#291233, + #291242,#291251,#291260,#291269,#291278,#291287,#291296,#291305, + #291314,#291323,#291332,#291341,#291350,#291359,#291368,#291377, + #291386,#291395,#291404,#291413,#291422,#291431,#291440,#291449, + #291458,#291467,#291476,#291485,#291494,#291503,#291512,#291521, + #291530,#291539,#291548,#291557,#291566,#291575,#291584,#291593, + #291602,#291611,#291620,#291629,#291638,#291647,#291656,#291665, + #291674,#291683,#291692,#291701,#291710,#291719,#291728,#291737, + #291746,#291755,#291764,#291773,#291782,#291791,#291800,#291809, + #291818,#291827,#291836,#291845,#291854,#291863,#291872,#291881, + #291890,#291899,#291908,#291917,#291926,#291935,#291944,#291953, + #291962,#291971,#291980,#291989,#291998,#292007,#292016,#292025, + #292034,#292043,#292052,#292061,#292070,#292079,#292088,#292097, + #292106,#292115,#292124,#292133,#292142,#292151,#292160,#292169, + #292178,#292187,#292196,#292205,#292214,#292223,#292232,#292241, + #292250,#292259,#292268,#292277,#292286,#292295,#292304,#292313, + #292322,#292331,#292340,#292349,#292358,#292367),#114947); +#290450 = STYLED_ITEM('color',(#290451),#110011); +#290451 = PRESENTATION_STYLE_ASSIGNMENT((#290452,#290457)); +#290452 = SURFACE_STYLE_USAGE(.BOTH.,#290453); +#290453 = SURFACE_SIDE_STYLE('',(#290454)); +#290454 = SURFACE_STYLE_FILL_AREA(#290455); +#290455 = FILL_AREA_STYLE('',(#290456)); +#290456 = FILL_AREA_STYLE_COLOUR('',#279624); +#290457 = CURVE_STYLE('',#290458,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290458 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290459 = STYLED_ITEM('color',(#290460),#110051); +#290460 = PRESENTATION_STYLE_ASSIGNMENT((#290461,#290466)); +#290461 = SURFACE_STYLE_USAGE(.BOTH.,#290462); +#290462 = SURFACE_SIDE_STYLE('',(#290463)); +#290463 = SURFACE_STYLE_FILL_AREA(#290464); +#290464 = FILL_AREA_STYLE('',(#290465)); +#290465 = FILL_AREA_STYLE_COLOUR('',#279624); +#290466 = CURVE_STYLE('',#290467,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290467 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290468 = STYLED_ITEM('color',(#290469),#110114); +#290469 = PRESENTATION_STYLE_ASSIGNMENT((#290470,#290475)); +#290470 = SURFACE_STYLE_USAGE(.BOTH.,#290471); +#290471 = SURFACE_SIDE_STYLE('',(#290472)); +#290472 = SURFACE_STYLE_FILL_AREA(#290473); +#290473 = FILL_AREA_STYLE('',(#290474)); +#290474 = FILL_AREA_STYLE_COLOUR('',#279624); +#290475 = CURVE_STYLE('',#290476,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290476 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290477 = STYLED_ITEM('color',(#290478),#110177); +#290478 = PRESENTATION_STYLE_ASSIGNMENT((#290479,#290484)); +#290479 = SURFACE_STYLE_USAGE(.BOTH.,#290480); +#290480 = SURFACE_SIDE_STYLE('',(#290481)); +#290481 = SURFACE_STYLE_FILL_AREA(#290482); +#290482 = FILL_AREA_STYLE('',(#290483)); +#290483 = FILL_AREA_STYLE_COLOUR('',#279624); +#290484 = CURVE_STYLE('',#290485,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290485 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290486 = STYLED_ITEM('color',(#290487),#110194); +#290487 = PRESENTATION_STYLE_ASSIGNMENT((#290488,#290493)); +#290488 = SURFACE_STYLE_USAGE(.BOTH.,#290489); +#290489 = SURFACE_SIDE_STYLE('',(#290490)); +#290490 = SURFACE_STYLE_FILL_AREA(#290491); +#290491 = FILL_AREA_STYLE('',(#290492)); +#290492 = FILL_AREA_STYLE_COLOUR('',#279624); +#290493 = CURVE_STYLE('',#290494,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290494 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290495 = STYLED_ITEM('color',(#290496),#110415); +#290496 = PRESENTATION_STYLE_ASSIGNMENT((#290497,#290502)); +#290497 = SURFACE_STYLE_USAGE(.BOTH.,#290498); +#290498 = SURFACE_SIDE_STYLE('',(#290499)); +#290499 = SURFACE_STYLE_FILL_AREA(#290500); +#290500 = FILL_AREA_STYLE('',(#290501)); +#290501 = FILL_AREA_STYLE_COLOUR('',#279624); +#290502 = CURVE_STYLE('',#290503,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290504 = STYLED_ITEM('color',(#290505),#110437); +#290505 = PRESENTATION_STYLE_ASSIGNMENT((#290506,#290511)); +#290506 = SURFACE_STYLE_USAGE(.BOTH.,#290507); +#290507 = SURFACE_SIDE_STYLE('',(#290508)); +#290508 = SURFACE_STYLE_FILL_AREA(#290509); +#290509 = FILL_AREA_STYLE('',(#290510)); +#290510 = FILL_AREA_STYLE_COLOUR('',#279624); +#290511 = CURVE_STYLE('',#290512,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290513 = STYLED_ITEM('color',(#290514),#110454); +#290514 = PRESENTATION_STYLE_ASSIGNMENT((#290515,#290520)); +#290515 = SURFACE_STYLE_USAGE(.BOTH.,#290516); +#290516 = SURFACE_SIDE_STYLE('',(#290517)); +#290517 = SURFACE_STYLE_FILL_AREA(#290518); +#290518 = FILL_AREA_STYLE('',(#290519)); +#290519 = FILL_AREA_STYLE_COLOUR('',#279624); +#290520 = CURVE_STYLE('',#290521,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290522 = OVER_RIDING_STYLED_ITEM('overriding color',(#290523),#110487, + #290513); +#290523 = PRESENTATION_STYLE_ASSIGNMENT((#290524,#290529)); +#290524 = SURFACE_STYLE_USAGE(.BOTH.,#290525); +#290525 = SURFACE_SIDE_STYLE('',(#290526)); +#290526 = SURFACE_STYLE_FILL_AREA(#290527); +#290527 = FILL_AREA_STYLE('',(#290528)); +#290528 = FILL_AREA_STYLE_COLOUR('',#280691); +#290529 = CURVE_STYLE('',#290530,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290531 = OVER_RIDING_STYLED_ITEM('overriding color',(#290532),#110519, + #290513); +#290532 = PRESENTATION_STYLE_ASSIGNMENT((#290533,#290538)); +#290533 = SURFACE_STYLE_USAGE(.BOTH.,#290534); +#290534 = SURFACE_SIDE_STYLE('',(#290535)); +#290535 = SURFACE_STYLE_FILL_AREA(#290536); +#290536 = FILL_AREA_STYLE('',(#290537)); +#290537 = FILL_AREA_STYLE_COLOUR('',#280691); +#290538 = CURVE_STYLE('',#290539,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290539 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290540 = OVER_RIDING_STYLED_ITEM('overriding color',(#290541),#110553, + #290513); +#290541 = PRESENTATION_STYLE_ASSIGNMENT((#290542,#290547)); +#290542 = SURFACE_STYLE_USAGE(.BOTH.,#290543); +#290543 = SURFACE_SIDE_STYLE('',(#290544)); +#290544 = SURFACE_STYLE_FILL_AREA(#290545); +#290545 = FILL_AREA_STYLE('',(#290546)); +#290546 = FILL_AREA_STYLE_COLOUR('',#280691); +#290547 = CURVE_STYLE('',#290548,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290548 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290549 = OVER_RIDING_STYLED_ITEM('overriding color',(#290550),#110585, + #290513); +#290550 = PRESENTATION_STYLE_ASSIGNMENT((#290551,#290556)); +#290551 = SURFACE_STYLE_USAGE(.BOTH.,#290552); +#290552 = SURFACE_SIDE_STYLE('',(#290553)); +#290553 = SURFACE_STYLE_FILL_AREA(#290554); +#290554 = FILL_AREA_STYLE('',(#290555)); +#290555 = FILL_AREA_STYLE_COLOUR('',#280691); +#290556 = CURVE_STYLE('',#290557,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290557 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290558 = OVER_RIDING_STYLED_ITEM('overriding color',(#290559),#110619, + #290513); +#290559 = PRESENTATION_STYLE_ASSIGNMENT((#290560,#290565)); +#290560 = SURFACE_STYLE_USAGE(.BOTH.,#290561); +#290561 = SURFACE_SIDE_STYLE('',(#290562)); +#290562 = SURFACE_STYLE_FILL_AREA(#290563); +#290563 = FILL_AREA_STYLE('',(#290564)); +#290564 = FILL_AREA_STYLE_COLOUR('',#280691); +#290565 = CURVE_STYLE('',#290566,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290566 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290567 = OVER_RIDING_STYLED_ITEM('overriding color',(#290568),#110651, + #290513); +#290568 = PRESENTATION_STYLE_ASSIGNMENT((#290569,#290574)); +#290569 = SURFACE_STYLE_USAGE(.BOTH.,#290570); +#290570 = SURFACE_SIDE_STYLE('',(#290571)); +#290571 = SURFACE_STYLE_FILL_AREA(#290572); +#290572 = FILL_AREA_STYLE('',(#290573)); +#290573 = FILL_AREA_STYLE_COLOUR('',#280691); +#290574 = CURVE_STYLE('',#290575,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290575 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290576 = OVER_RIDING_STYLED_ITEM('overriding color',(#290577),#110685, + #290513); +#290577 = PRESENTATION_STYLE_ASSIGNMENT((#290578,#290583)); +#290578 = SURFACE_STYLE_USAGE(.BOTH.,#290579); +#290579 = SURFACE_SIDE_STYLE('',(#290580)); +#290580 = SURFACE_STYLE_FILL_AREA(#290581); +#290581 = FILL_AREA_STYLE('',(#290582)); +#290582 = FILL_AREA_STYLE_COLOUR('',#280691); +#290583 = CURVE_STYLE('',#290584,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290584 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290585 = OVER_RIDING_STYLED_ITEM('overriding color',(#290586),#110717, + #290513); +#290586 = PRESENTATION_STYLE_ASSIGNMENT((#290587,#290592)); +#290587 = SURFACE_STYLE_USAGE(.BOTH.,#290588); +#290588 = SURFACE_SIDE_STYLE('',(#290589)); +#290589 = SURFACE_STYLE_FILL_AREA(#290590); +#290590 = FILL_AREA_STYLE('',(#290591)); +#290591 = FILL_AREA_STYLE_COLOUR('',#280691); +#290592 = CURVE_STYLE('',#290593,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290593 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290594 = OVER_RIDING_STYLED_ITEM('overriding color',(#290595),#110751, + #290513); +#290595 = PRESENTATION_STYLE_ASSIGNMENT((#290596,#290601)); +#290596 = SURFACE_STYLE_USAGE(.BOTH.,#290597); +#290597 = SURFACE_SIDE_STYLE('',(#290598)); +#290598 = SURFACE_STYLE_FILL_AREA(#290599); +#290599 = FILL_AREA_STYLE('',(#290600)); +#290600 = FILL_AREA_STYLE_COLOUR('',#280691); +#290601 = CURVE_STYLE('',#290602,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290602 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290603 = OVER_RIDING_STYLED_ITEM('overriding color',(#290604),#110783, + #290513); +#290604 = PRESENTATION_STYLE_ASSIGNMENT((#290605,#290610)); +#290605 = SURFACE_STYLE_USAGE(.BOTH.,#290606); +#290606 = SURFACE_SIDE_STYLE('',(#290607)); +#290607 = SURFACE_STYLE_FILL_AREA(#290608); +#290608 = FILL_AREA_STYLE('',(#290609)); +#290609 = FILL_AREA_STYLE_COLOUR('',#280691); +#290610 = CURVE_STYLE('',#290611,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290611 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290612 = OVER_RIDING_STYLED_ITEM('overriding color',(#290613),#110817, + #290513); +#290613 = PRESENTATION_STYLE_ASSIGNMENT((#290614,#290619)); +#290614 = SURFACE_STYLE_USAGE(.BOTH.,#290615); +#290615 = SURFACE_SIDE_STYLE('',(#290616)); +#290616 = SURFACE_STYLE_FILL_AREA(#290617); +#290617 = FILL_AREA_STYLE('',(#290618)); +#290618 = FILL_AREA_STYLE_COLOUR('',#280691); +#290619 = CURVE_STYLE('',#290620,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290620 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290621 = OVER_RIDING_STYLED_ITEM('overriding color',(#290622),#110849, + #290513); +#290622 = PRESENTATION_STYLE_ASSIGNMENT((#290623,#290628)); +#290623 = SURFACE_STYLE_USAGE(.BOTH.,#290624); +#290624 = SURFACE_SIDE_STYLE('',(#290625)); +#290625 = SURFACE_STYLE_FILL_AREA(#290626); +#290626 = FILL_AREA_STYLE('',(#290627)); +#290627 = FILL_AREA_STYLE_COLOUR('',#280691); +#290628 = CURVE_STYLE('',#290629,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290629 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290630 = STYLED_ITEM('color',(#290631),#110867); +#290631 = PRESENTATION_STYLE_ASSIGNMENT((#290632,#290637)); +#290632 = SURFACE_STYLE_USAGE(.BOTH.,#290633); +#290633 = SURFACE_SIDE_STYLE('',(#290634)); +#290634 = SURFACE_STYLE_FILL_AREA(#290635); +#290635 = FILL_AREA_STYLE('',(#290636)); +#290636 = FILL_AREA_STYLE_COLOUR('',#279624); +#290637 = CURVE_STYLE('',#290638,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290638 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290639 = STYLED_ITEM('color',(#290640),#110879); +#290640 = PRESENTATION_STYLE_ASSIGNMENT((#290641,#290646)); +#290641 = SURFACE_STYLE_USAGE(.BOTH.,#290642); +#290642 = SURFACE_SIDE_STYLE('',(#290643)); +#290643 = SURFACE_STYLE_FILL_AREA(#290644); +#290644 = FILL_AREA_STYLE('',(#290645)); +#290645 = FILL_AREA_STYLE_COLOUR('',#279624); +#290646 = CURVE_STYLE('',#290647,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290648 = STYLED_ITEM('color',(#290649),#110891); +#290649 = PRESENTATION_STYLE_ASSIGNMENT((#290650,#290655)); +#290650 = SURFACE_STYLE_USAGE(.BOTH.,#290651); +#290651 = SURFACE_SIDE_STYLE('',(#290652)); +#290652 = SURFACE_STYLE_FILL_AREA(#290653); +#290653 = FILL_AREA_STYLE('',(#290654)); +#290654 = FILL_AREA_STYLE_COLOUR('',#279624); +#290655 = CURVE_STYLE('',#290656,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290656 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290657 = STYLED_ITEM('color',(#290658),#110922); +#290658 = PRESENTATION_STYLE_ASSIGNMENT((#290659,#290664)); +#290659 = SURFACE_STYLE_USAGE(.BOTH.,#290660); +#290660 = SURFACE_SIDE_STYLE('',(#290661)); +#290661 = SURFACE_STYLE_FILL_AREA(#290662); +#290662 = FILL_AREA_STYLE('',(#290663)); +#290663 = FILL_AREA_STYLE_COLOUR('',#279624); +#290664 = CURVE_STYLE('',#290665,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290665 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290666 = STYLED_ITEM('color',(#290667),#110946); +#290667 = PRESENTATION_STYLE_ASSIGNMENT((#290668,#290673)); +#290668 = SURFACE_STYLE_USAGE(.BOTH.,#290669); +#290669 = SURFACE_SIDE_STYLE('',(#290670)); +#290670 = SURFACE_STYLE_FILL_AREA(#290671); +#290671 = FILL_AREA_STYLE('',(#290672)); +#290672 = FILL_AREA_STYLE_COLOUR('',#279624); +#290673 = CURVE_STYLE('',#290674,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290674 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290675 = STYLED_ITEM('color',(#290676),#110970); +#290676 = PRESENTATION_STYLE_ASSIGNMENT((#290677,#290682)); +#290677 = SURFACE_STYLE_USAGE(.BOTH.,#290678); +#290678 = SURFACE_SIDE_STYLE('',(#290679)); +#290679 = SURFACE_STYLE_FILL_AREA(#290680); +#290680 = FILL_AREA_STYLE('',(#290681)); +#290681 = FILL_AREA_STYLE_COLOUR('',#279624); +#290682 = CURVE_STYLE('',#290683,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290684 = STYLED_ITEM('color',(#290685),#110987); +#290685 = PRESENTATION_STYLE_ASSIGNMENT((#290686,#290691)); +#290686 = SURFACE_STYLE_USAGE(.BOTH.,#290687); +#290687 = SURFACE_SIDE_STYLE('',(#290688)); +#290688 = SURFACE_STYLE_FILL_AREA(#290689); +#290689 = FILL_AREA_STYLE('',(#290690)); +#290690 = FILL_AREA_STYLE_COLOUR('',#279624); +#290691 = CURVE_STYLE('',#290692,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290692 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290693 = STYLED_ITEM('color',(#290694),#111018); +#290694 = PRESENTATION_STYLE_ASSIGNMENT((#290695,#290700)); +#290695 = SURFACE_STYLE_USAGE(.BOTH.,#290696); +#290696 = SURFACE_SIDE_STYLE('',(#290697)); +#290697 = SURFACE_STYLE_FILL_AREA(#290698); +#290698 = FILL_AREA_STYLE('',(#290699)); +#290699 = FILL_AREA_STYLE_COLOUR('',#279624); +#290700 = CURVE_STYLE('',#290701,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290701 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290702 = STYLED_ITEM('color',(#290703),#111042); +#290703 = PRESENTATION_STYLE_ASSIGNMENT((#290704,#290709)); +#290704 = SURFACE_STYLE_USAGE(.BOTH.,#290705); +#290705 = SURFACE_SIDE_STYLE('',(#290706)); +#290706 = SURFACE_STYLE_FILL_AREA(#290707); +#290707 = FILL_AREA_STYLE('',(#290708)); +#290708 = FILL_AREA_STYLE_COLOUR('',#279624); +#290709 = CURVE_STYLE('',#290710,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290710 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290711 = STYLED_ITEM('color',(#290712),#111066); +#290712 = PRESENTATION_STYLE_ASSIGNMENT((#290713,#290718)); +#290713 = SURFACE_STYLE_USAGE(.BOTH.,#290714); +#290714 = SURFACE_SIDE_STYLE('',(#290715)); +#290715 = SURFACE_STYLE_FILL_AREA(#290716); +#290716 = FILL_AREA_STYLE('',(#290717)); +#290717 = FILL_AREA_STYLE_COLOUR('',#279624); +#290718 = CURVE_STYLE('',#290719,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290719 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290720 = STYLED_ITEM('color',(#290721),#111083); +#290721 = PRESENTATION_STYLE_ASSIGNMENT((#290722,#290727)); +#290722 = SURFACE_STYLE_USAGE(.BOTH.,#290723); +#290723 = SURFACE_SIDE_STYLE('',(#290724)); +#290724 = SURFACE_STYLE_FILL_AREA(#290725); +#290725 = FILL_AREA_STYLE('',(#290726)); +#290726 = FILL_AREA_STYLE_COLOUR('',#279624); +#290727 = CURVE_STYLE('',#290728,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290728 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290729 = STYLED_ITEM('color',(#290730),#111114); +#290730 = PRESENTATION_STYLE_ASSIGNMENT((#290731,#290736)); +#290731 = SURFACE_STYLE_USAGE(.BOTH.,#290732); +#290732 = SURFACE_SIDE_STYLE('',(#290733)); +#290733 = SURFACE_STYLE_FILL_AREA(#290734); +#290734 = FILL_AREA_STYLE('',(#290735)); +#290735 = FILL_AREA_STYLE_COLOUR('',#279624); +#290736 = CURVE_STYLE('',#290737,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290737 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290738 = STYLED_ITEM('color',(#290739),#111138); +#290739 = PRESENTATION_STYLE_ASSIGNMENT((#290740,#290745)); +#290740 = SURFACE_STYLE_USAGE(.BOTH.,#290741); +#290741 = SURFACE_SIDE_STYLE('',(#290742)); +#290742 = SURFACE_STYLE_FILL_AREA(#290743); +#290743 = FILL_AREA_STYLE('',(#290744)); +#290744 = FILL_AREA_STYLE_COLOUR('',#279624); +#290745 = CURVE_STYLE('',#290746,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290746 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290747 = STYLED_ITEM('color',(#290748),#111162); +#290748 = PRESENTATION_STYLE_ASSIGNMENT((#290749,#290754)); +#290749 = SURFACE_STYLE_USAGE(.BOTH.,#290750); +#290750 = SURFACE_SIDE_STYLE('',(#290751)); +#290751 = SURFACE_STYLE_FILL_AREA(#290752); +#290752 = FILL_AREA_STYLE('',(#290753)); +#290753 = FILL_AREA_STYLE_COLOUR('',#279624); +#290754 = CURVE_STYLE('',#290755,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290755 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290756 = STYLED_ITEM('color',(#290757),#111179); +#290757 = PRESENTATION_STYLE_ASSIGNMENT((#290758,#290763)); +#290758 = SURFACE_STYLE_USAGE(.BOTH.,#290759); +#290759 = SURFACE_SIDE_STYLE('',(#290760)); +#290760 = SURFACE_STYLE_FILL_AREA(#290761); +#290761 = FILL_AREA_STYLE('',(#290762)); +#290762 = FILL_AREA_STYLE_COLOUR('',#279624); +#290763 = CURVE_STYLE('',#290764,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290764 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290765 = STYLED_ITEM('color',(#290766),#111210); +#290766 = PRESENTATION_STYLE_ASSIGNMENT((#290767,#290772)); +#290767 = SURFACE_STYLE_USAGE(.BOTH.,#290768); +#290768 = SURFACE_SIDE_STYLE('',(#290769)); +#290769 = SURFACE_STYLE_FILL_AREA(#290770); +#290770 = FILL_AREA_STYLE('',(#290771)); +#290771 = FILL_AREA_STYLE_COLOUR('',#279624); +#290772 = CURVE_STYLE('',#290773,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290774 = STYLED_ITEM('color',(#290775),#111234); +#290775 = PRESENTATION_STYLE_ASSIGNMENT((#290776,#290781)); +#290776 = SURFACE_STYLE_USAGE(.BOTH.,#290777); +#290777 = SURFACE_SIDE_STYLE('',(#290778)); +#290778 = SURFACE_STYLE_FILL_AREA(#290779); +#290779 = FILL_AREA_STYLE('',(#290780)); +#290780 = FILL_AREA_STYLE_COLOUR('',#279624); +#290781 = CURVE_STYLE('',#290782,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290782 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290783 = STYLED_ITEM('color',(#290784),#111258); +#290784 = PRESENTATION_STYLE_ASSIGNMENT((#290785,#290790)); +#290785 = SURFACE_STYLE_USAGE(.BOTH.,#290786); +#290786 = SURFACE_SIDE_STYLE('',(#290787)); +#290787 = SURFACE_STYLE_FILL_AREA(#290788); +#290788 = FILL_AREA_STYLE('',(#290789)); +#290789 = FILL_AREA_STYLE_COLOUR('',#279624); +#290790 = CURVE_STYLE('',#290791,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290791 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290792 = STYLED_ITEM('color',(#290793),#111275); +#290793 = PRESENTATION_STYLE_ASSIGNMENT((#290794,#290799)); +#290794 = SURFACE_STYLE_USAGE(.BOTH.,#290795); +#290795 = SURFACE_SIDE_STYLE('',(#290796)); +#290796 = SURFACE_STYLE_FILL_AREA(#290797); +#290797 = FILL_AREA_STYLE('',(#290798)); +#290798 = FILL_AREA_STYLE_COLOUR('',#279624); +#290799 = CURVE_STYLE('',#290800,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290800 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290801 = STYLED_ITEM('color',(#290802),#111306); +#290802 = PRESENTATION_STYLE_ASSIGNMENT((#290803,#290808)); +#290803 = SURFACE_STYLE_USAGE(.BOTH.,#290804); +#290804 = SURFACE_SIDE_STYLE('',(#290805)); +#290805 = SURFACE_STYLE_FILL_AREA(#290806); +#290806 = FILL_AREA_STYLE('',(#290807)); +#290807 = FILL_AREA_STYLE_COLOUR('',#279624); +#290808 = CURVE_STYLE('',#290809,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290809 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290810 = STYLED_ITEM('color',(#290811),#111330); +#290811 = PRESENTATION_STYLE_ASSIGNMENT((#290812,#290817)); +#290812 = SURFACE_STYLE_USAGE(.BOTH.,#290813); +#290813 = SURFACE_SIDE_STYLE('',(#290814)); +#290814 = SURFACE_STYLE_FILL_AREA(#290815); +#290815 = FILL_AREA_STYLE('',(#290816)); +#290816 = FILL_AREA_STYLE_COLOUR('',#279624); +#290817 = CURVE_STYLE('',#290818,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290818 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290819 = STYLED_ITEM('color',(#290820),#111354); +#290820 = PRESENTATION_STYLE_ASSIGNMENT((#290821,#290826)); +#290821 = SURFACE_STYLE_USAGE(.BOTH.,#290822); +#290822 = SURFACE_SIDE_STYLE('',(#290823)); +#290823 = SURFACE_STYLE_FILL_AREA(#290824); +#290824 = FILL_AREA_STYLE('',(#290825)); +#290825 = FILL_AREA_STYLE_COLOUR('',#279624); +#290826 = CURVE_STYLE('',#290827,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290827 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290828 = STYLED_ITEM('color',(#290829),#111371); +#290829 = PRESENTATION_STYLE_ASSIGNMENT((#290830,#290835)); +#290830 = SURFACE_STYLE_USAGE(.BOTH.,#290831); +#290831 = SURFACE_SIDE_STYLE('',(#290832)); +#290832 = SURFACE_STYLE_FILL_AREA(#290833); +#290833 = FILL_AREA_STYLE('',(#290834)); +#290834 = FILL_AREA_STYLE_COLOUR('',#279624); +#290835 = CURVE_STYLE('',#290836,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290836 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290837 = STYLED_ITEM('color',(#290838),#111402); +#290838 = PRESENTATION_STYLE_ASSIGNMENT((#290839,#290844)); +#290839 = SURFACE_STYLE_USAGE(.BOTH.,#290840); +#290840 = SURFACE_SIDE_STYLE('',(#290841)); +#290841 = SURFACE_STYLE_FILL_AREA(#290842); +#290842 = FILL_AREA_STYLE('',(#290843)); +#290843 = FILL_AREA_STYLE_COLOUR('',#279624); +#290844 = CURVE_STYLE('',#290845,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290845 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290846 = STYLED_ITEM('color',(#290847),#111426); +#290847 = PRESENTATION_STYLE_ASSIGNMENT((#290848,#290853)); +#290848 = SURFACE_STYLE_USAGE(.BOTH.,#290849); +#290849 = SURFACE_SIDE_STYLE('',(#290850)); +#290850 = SURFACE_STYLE_FILL_AREA(#290851); +#290851 = FILL_AREA_STYLE('',(#290852)); +#290852 = FILL_AREA_STYLE_COLOUR('',#279624); +#290853 = CURVE_STYLE('',#290854,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290854 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290855 = STYLED_ITEM('color',(#290856),#111450); +#290856 = PRESENTATION_STYLE_ASSIGNMENT((#290857,#290862)); +#290857 = SURFACE_STYLE_USAGE(.BOTH.,#290858); +#290858 = SURFACE_SIDE_STYLE('',(#290859)); +#290859 = SURFACE_STYLE_FILL_AREA(#290860); +#290860 = FILL_AREA_STYLE('',(#290861)); +#290861 = FILL_AREA_STYLE_COLOUR('',#279624); +#290862 = CURVE_STYLE('',#290863,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#290863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290864 = STYLED_ITEM('color',(#290865),#111467); +#290865 = PRESENTATION_STYLE_ASSIGNMENT((#290866,#290871)); +#290866 = SURFACE_STYLE_USAGE(.BOTH.,#290867); +#290867 = SURFACE_SIDE_STYLE('',(#290868)); +#290868 = SURFACE_STYLE_FILL_AREA(#290869); +#290869 = FILL_AREA_STYLE('',(#290870)); +#290870 = FILL_AREA_STYLE_COLOUR('',#280691); +#290871 = CURVE_STYLE('',#290872,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290872 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290873 = STYLED_ITEM('color',(#290874),#111484); +#290874 = PRESENTATION_STYLE_ASSIGNMENT((#290875,#290880)); +#290875 = SURFACE_STYLE_USAGE(.BOTH.,#290876); +#290876 = SURFACE_SIDE_STYLE('',(#290877)); +#290877 = SURFACE_STYLE_FILL_AREA(#290878); +#290878 = FILL_AREA_STYLE('',(#290879)); +#290879 = FILL_AREA_STYLE_COLOUR('',#280691); +#290880 = CURVE_STYLE('',#290881,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290881 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290882 = STYLED_ITEM('color',(#290883),#111531); +#290883 = PRESENTATION_STYLE_ASSIGNMENT((#290884,#290889)); +#290884 = SURFACE_STYLE_USAGE(.BOTH.,#290885); +#290885 = SURFACE_SIDE_STYLE('',(#290886)); +#290886 = SURFACE_STYLE_FILL_AREA(#290887); +#290887 = FILL_AREA_STYLE('',(#290888)); +#290888 = FILL_AREA_STYLE_COLOUR('',#280691); +#290889 = CURVE_STYLE('',#290890,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290891 = STYLED_ITEM('color',(#290892),#111548); +#290892 = PRESENTATION_STYLE_ASSIGNMENT((#290893,#290898)); +#290893 = SURFACE_STYLE_USAGE(.BOTH.,#290894); +#290894 = SURFACE_SIDE_STYLE('',(#290895)); +#290895 = SURFACE_STYLE_FILL_AREA(#290896); +#290896 = FILL_AREA_STYLE('',(#290897)); +#290897 = FILL_AREA_STYLE_COLOUR('',#280691); +#290898 = CURVE_STYLE('',#290899,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290899 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290900 = STYLED_ITEM('color',(#290901),#111595); +#290901 = PRESENTATION_STYLE_ASSIGNMENT((#290902,#290907)); +#290902 = SURFACE_STYLE_USAGE(.BOTH.,#290903); +#290903 = SURFACE_SIDE_STYLE('',(#290904)); +#290904 = SURFACE_STYLE_FILL_AREA(#290905); +#290905 = FILL_AREA_STYLE('',(#290906)); +#290906 = FILL_AREA_STYLE_COLOUR('',#280691); +#290907 = CURVE_STYLE('',#290908,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290908 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290909 = STYLED_ITEM('color',(#290910),#111612); +#290910 = PRESENTATION_STYLE_ASSIGNMENT((#290911,#290916)); +#290911 = SURFACE_STYLE_USAGE(.BOTH.,#290912); +#290912 = SURFACE_SIDE_STYLE('',(#290913)); +#290913 = SURFACE_STYLE_FILL_AREA(#290914); +#290914 = FILL_AREA_STYLE('',(#290915)); +#290915 = FILL_AREA_STYLE_COLOUR('',#280691); +#290916 = CURVE_STYLE('',#290917,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290917 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290918 = STYLED_ITEM('color',(#290919),#111659); +#290919 = PRESENTATION_STYLE_ASSIGNMENT((#290920,#290925)); +#290920 = SURFACE_STYLE_USAGE(.BOTH.,#290921); +#290921 = SURFACE_SIDE_STYLE('',(#290922)); +#290922 = SURFACE_STYLE_FILL_AREA(#290923); +#290923 = FILL_AREA_STYLE('',(#290924)); +#290924 = FILL_AREA_STYLE_COLOUR('',#280691); +#290925 = CURVE_STYLE('',#290926,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290926 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290927 = STYLED_ITEM('color',(#290928),#111676); +#290928 = PRESENTATION_STYLE_ASSIGNMENT((#290929,#290934)); +#290929 = SURFACE_STYLE_USAGE(.BOTH.,#290930); +#290930 = SURFACE_SIDE_STYLE('',(#290931)); +#290931 = SURFACE_STYLE_FILL_AREA(#290932); +#290932 = FILL_AREA_STYLE('',(#290933)); +#290933 = FILL_AREA_STYLE_COLOUR('',#280691); +#290934 = CURVE_STYLE('',#290935,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290935 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290936 = STYLED_ITEM('color',(#290937),#111723); +#290937 = PRESENTATION_STYLE_ASSIGNMENT((#290938,#290943)); +#290938 = SURFACE_STYLE_USAGE(.BOTH.,#290939); +#290939 = SURFACE_SIDE_STYLE('',(#290940)); +#290940 = SURFACE_STYLE_FILL_AREA(#290941); +#290941 = FILL_AREA_STYLE('',(#290942)); +#290942 = FILL_AREA_STYLE_COLOUR('',#280691); +#290943 = CURVE_STYLE('',#290944,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290944 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290945 = STYLED_ITEM('color',(#290946),#111740); +#290946 = PRESENTATION_STYLE_ASSIGNMENT((#290947,#290952)); +#290947 = SURFACE_STYLE_USAGE(.BOTH.,#290948); +#290948 = SURFACE_SIDE_STYLE('',(#290949)); +#290949 = SURFACE_STYLE_FILL_AREA(#290950); +#290950 = FILL_AREA_STYLE('',(#290951)); +#290951 = FILL_AREA_STYLE_COLOUR('',#280691); +#290952 = CURVE_STYLE('',#290953,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290953 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290954 = STYLED_ITEM('color',(#290955),#111787); +#290955 = PRESENTATION_STYLE_ASSIGNMENT((#290956,#290961)); +#290956 = SURFACE_STYLE_USAGE(.BOTH.,#290957); +#290957 = SURFACE_SIDE_STYLE('',(#290958)); +#290958 = SURFACE_STYLE_FILL_AREA(#290959); +#290959 = FILL_AREA_STYLE('',(#290960)); +#290960 = FILL_AREA_STYLE_COLOUR('',#280691); +#290961 = CURVE_STYLE('',#290962,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290962 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290963 = STYLED_ITEM('color',(#290964),#111804); +#290964 = PRESENTATION_STYLE_ASSIGNMENT((#290965,#290970)); +#290965 = SURFACE_STYLE_USAGE(.BOTH.,#290966); +#290966 = SURFACE_SIDE_STYLE('',(#290967)); +#290967 = SURFACE_STYLE_FILL_AREA(#290968); +#290968 = FILL_AREA_STYLE('',(#290969)); +#290969 = FILL_AREA_STYLE_COLOUR('',#280691); +#290970 = CURVE_STYLE('',#290971,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290971 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290972 = STYLED_ITEM('color',(#290973),#111851); +#290973 = PRESENTATION_STYLE_ASSIGNMENT((#290974,#290979)); +#290974 = SURFACE_STYLE_USAGE(.BOTH.,#290975); +#290975 = SURFACE_SIDE_STYLE('',(#290976)); +#290976 = SURFACE_STYLE_FILL_AREA(#290977); +#290977 = FILL_AREA_STYLE('',(#290978)); +#290978 = FILL_AREA_STYLE_COLOUR('',#280691); +#290979 = CURVE_STYLE('',#290980,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290980 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290981 = STYLED_ITEM('color',(#290982),#111868); +#290982 = PRESENTATION_STYLE_ASSIGNMENT((#290983,#290988)); +#290983 = SURFACE_STYLE_USAGE(.BOTH.,#290984); +#290984 = SURFACE_SIDE_STYLE('',(#290985)); +#290985 = SURFACE_STYLE_FILL_AREA(#290986); +#290986 = FILL_AREA_STYLE('',(#290987)); +#290987 = FILL_AREA_STYLE_COLOUR('',#280691); +#290988 = CURVE_STYLE('',#290989,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290989 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290990 = STYLED_ITEM('color',(#290991),#111915); +#290991 = PRESENTATION_STYLE_ASSIGNMENT((#290992,#290997)); +#290992 = SURFACE_STYLE_USAGE(.BOTH.,#290993); +#290993 = SURFACE_SIDE_STYLE('',(#290994)); +#290994 = SURFACE_STYLE_FILL_AREA(#290995); +#290995 = FILL_AREA_STYLE('',(#290996)); +#290996 = FILL_AREA_STYLE_COLOUR('',#280691); +#290997 = CURVE_STYLE('',#290998,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#290998 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290999 = STYLED_ITEM('color',(#291000),#111932); +#291000 = PRESENTATION_STYLE_ASSIGNMENT((#291001,#291006)); +#291001 = SURFACE_STYLE_USAGE(.BOTH.,#291002); +#291002 = SURFACE_SIDE_STYLE('',(#291003)); +#291003 = SURFACE_STYLE_FILL_AREA(#291004); +#291004 = FILL_AREA_STYLE('',(#291005)); +#291005 = FILL_AREA_STYLE_COLOUR('',#280691); +#291006 = CURVE_STYLE('',#291007,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291007 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291008 = STYLED_ITEM('color',(#291009),#111979); +#291009 = PRESENTATION_STYLE_ASSIGNMENT((#291010,#291015)); +#291010 = SURFACE_STYLE_USAGE(.BOTH.,#291011); +#291011 = SURFACE_SIDE_STYLE('',(#291012)); +#291012 = SURFACE_STYLE_FILL_AREA(#291013); +#291013 = FILL_AREA_STYLE('',(#291014)); +#291014 = FILL_AREA_STYLE_COLOUR('',#280691); +#291015 = CURVE_STYLE('',#291016,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291016 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291017 = STYLED_ITEM('color',(#291018),#111996); +#291018 = PRESENTATION_STYLE_ASSIGNMENT((#291019,#291024)); +#291019 = SURFACE_STYLE_USAGE(.BOTH.,#291020); +#291020 = SURFACE_SIDE_STYLE('',(#291021)); +#291021 = SURFACE_STYLE_FILL_AREA(#291022); +#291022 = FILL_AREA_STYLE('',(#291023)); +#291023 = FILL_AREA_STYLE_COLOUR('',#280691); +#291024 = CURVE_STYLE('',#291025,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291025 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291026 = STYLED_ITEM('color',(#291027),#112043); +#291027 = PRESENTATION_STYLE_ASSIGNMENT((#291028,#291033)); +#291028 = SURFACE_STYLE_USAGE(.BOTH.,#291029); +#291029 = SURFACE_SIDE_STYLE('',(#291030)); +#291030 = SURFACE_STYLE_FILL_AREA(#291031); +#291031 = FILL_AREA_STYLE('',(#291032)); +#291032 = FILL_AREA_STYLE_COLOUR('',#280691); +#291033 = CURVE_STYLE('',#291034,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291034 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291035 = STYLED_ITEM('color',(#291036),#112060); +#291036 = PRESENTATION_STYLE_ASSIGNMENT((#291037,#291042)); +#291037 = SURFACE_STYLE_USAGE(.BOTH.,#291038); +#291038 = SURFACE_SIDE_STYLE('',(#291039)); +#291039 = SURFACE_STYLE_FILL_AREA(#291040); +#291040 = FILL_AREA_STYLE('',(#291041)); +#291041 = FILL_AREA_STYLE_COLOUR('',#280691); +#291042 = CURVE_STYLE('',#291043,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291043 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291044 = STYLED_ITEM('color',(#291045),#112107); +#291045 = PRESENTATION_STYLE_ASSIGNMENT((#291046,#291051)); +#291046 = SURFACE_STYLE_USAGE(.BOTH.,#291047); +#291047 = SURFACE_SIDE_STYLE('',(#291048)); +#291048 = SURFACE_STYLE_FILL_AREA(#291049); +#291049 = FILL_AREA_STYLE('',(#291050)); +#291050 = FILL_AREA_STYLE_COLOUR('',#280691); +#291051 = CURVE_STYLE('',#291052,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291052 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291053 = STYLED_ITEM('color',(#291054),#112124); +#291054 = PRESENTATION_STYLE_ASSIGNMENT((#291055,#291060)); +#291055 = SURFACE_STYLE_USAGE(.BOTH.,#291056); +#291056 = SURFACE_SIDE_STYLE('',(#291057)); +#291057 = SURFACE_STYLE_FILL_AREA(#291058); +#291058 = FILL_AREA_STYLE('',(#291059)); +#291059 = FILL_AREA_STYLE_COLOUR('',#280691); +#291060 = CURVE_STYLE('',#291061,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291061 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291062 = STYLED_ITEM('color',(#291063),#112171); +#291063 = PRESENTATION_STYLE_ASSIGNMENT((#291064,#291069)); +#291064 = SURFACE_STYLE_USAGE(.BOTH.,#291065); +#291065 = SURFACE_SIDE_STYLE('',(#291066)); +#291066 = SURFACE_STYLE_FILL_AREA(#291067); +#291067 = FILL_AREA_STYLE('',(#291068)); +#291068 = FILL_AREA_STYLE_COLOUR('',#280691); +#291069 = CURVE_STYLE('',#291070,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291071 = STYLED_ITEM('color',(#291072),#112188); +#291072 = PRESENTATION_STYLE_ASSIGNMENT((#291073,#291078)); +#291073 = SURFACE_STYLE_USAGE(.BOTH.,#291074); +#291074 = SURFACE_SIDE_STYLE('',(#291075)); +#291075 = SURFACE_STYLE_FILL_AREA(#291076); +#291076 = FILL_AREA_STYLE('',(#291077)); +#291077 = FILL_AREA_STYLE_COLOUR('',#280691); +#291078 = CURVE_STYLE('',#291079,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291079 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291080 = STYLED_ITEM('color',(#291081),#112235); +#291081 = PRESENTATION_STYLE_ASSIGNMENT((#291082,#291087)); +#291082 = SURFACE_STYLE_USAGE(.BOTH.,#291083); +#291083 = SURFACE_SIDE_STYLE('',(#291084)); +#291084 = SURFACE_STYLE_FILL_AREA(#291085); +#291085 = FILL_AREA_STYLE('',(#291086)); +#291086 = FILL_AREA_STYLE_COLOUR('',#279624); +#291087 = CURVE_STYLE('',#291088,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291089 = STYLED_ITEM('color',(#291090),#112266); +#291090 = PRESENTATION_STYLE_ASSIGNMENT((#291091,#291096)); +#291091 = SURFACE_STYLE_USAGE(.BOTH.,#291092); +#291092 = SURFACE_SIDE_STYLE('',(#291093)); +#291093 = SURFACE_STYLE_FILL_AREA(#291094); +#291094 = FILL_AREA_STYLE('',(#291095)); +#291095 = FILL_AREA_STYLE_COLOUR('',#279624); +#291096 = CURVE_STYLE('',#291097,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291098 = OVER_RIDING_STYLED_ITEM('overriding color',(#291099),#112280, + #291089); +#291099 = PRESENTATION_STYLE_ASSIGNMENT((#291100,#291105)); +#291100 = SURFACE_STYLE_USAGE(.BOTH.,#291101); +#291101 = SURFACE_SIDE_STYLE('',(#291102)); +#291102 = SURFACE_STYLE_FILL_AREA(#291103); +#291103 = FILL_AREA_STYLE('',(#291104)); +#291104 = FILL_AREA_STYLE_COLOUR('',#280691); +#291105 = CURVE_STYLE('',#291106,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291107 = OVER_RIDING_STYLED_ITEM('overriding color',(#291108),#112296, + #291089); +#291108 = PRESENTATION_STYLE_ASSIGNMENT((#291109,#291114)); +#291109 = SURFACE_STYLE_USAGE(.BOTH.,#291110); +#291110 = SURFACE_SIDE_STYLE('',(#291111)); +#291111 = SURFACE_STYLE_FILL_AREA(#291112); +#291112 = FILL_AREA_STYLE('',(#291113)); +#291113 = FILL_AREA_STYLE_COLOUR('',#280691); +#291114 = CURVE_STYLE('',#291115,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291116 = STYLED_ITEM('color',(#291117),#112322); +#291117 = PRESENTATION_STYLE_ASSIGNMENT((#291118,#291123)); +#291118 = SURFACE_STYLE_USAGE(.BOTH.,#291119); +#291119 = SURFACE_SIDE_STYLE('',(#291120)); +#291120 = SURFACE_STYLE_FILL_AREA(#291121); +#291121 = FILL_AREA_STYLE('',(#291122)); +#291122 = FILL_AREA_STYLE_COLOUR('',#279624); +#291123 = CURVE_STYLE('',#291124,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291125 = STYLED_ITEM('color',(#291126),#112346); +#291126 = PRESENTATION_STYLE_ASSIGNMENT((#291127,#291132)); +#291127 = SURFACE_STYLE_USAGE(.BOTH.,#291128); +#291128 = SURFACE_SIDE_STYLE('',(#291129)); +#291129 = SURFACE_STYLE_FILL_AREA(#291130); +#291130 = FILL_AREA_STYLE('',(#291131)); +#291131 = FILL_AREA_STYLE_COLOUR('',#279624); +#291132 = CURVE_STYLE('',#291133,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291134 = OVER_RIDING_STYLED_ITEM('overriding color',(#291135),#112360, + #291125); +#291135 = PRESENTATION_STYLE_ASSIGNMENT((#291136,#291141)); +#291136 = SURFACE_STYLE_USAGE(.BOTH.,#291137); +#291137 = SURFACE_SIDE_STYLE('',(#291138)); +#291138 = SURFACE_STYLE_FILL_AREA(#291139); +#291139 = FILL_AREA_STYLE('',(#291140)); +#291140 = FILL_AREA_STYLE_COLOUR('',#280691); +#291141 = CURVE_STYLE('',#291142,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291143 = OVER_RIDING_STYLED_ITEM('overriding color',(#291144),#112376, + #291125); +#291144 = PRESENTATION_STYLE_ASSIGNMENT((#291145,#291150)); +#291145 = SURFACE_STYLE_USAGE(.BOTH.,#291146); +#291146 = SURFACE_SIDE_STYLE('',(#291147)); +#291147 = SURFACE_STYLE_FILL_AREA(#291148); +#291148 = FILL_AREA_STYLE('',(#291149)); +#291149 = FILL_AREA_STYLE_COLOUR('',#280691); +#291150 = CURVE_STYLE('',#291151,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291152 = STYLED_ITEM('color',(#291153),#112395); +#291153 = PRESENTATION_STYLE_ASSIGNMENT((#291154,#291159)); +#291154 = SURFACE_STYLE_USAGE(.BOTH.,#291155); +#291155 = SURFACE_SIDE_STYLE('',(#291156)); +#291156 = SURFACE_STYLE_FILL_AREA(#291157); +#291157 = FILL_AREA_STYLE('',(#291158)); +#291158 = FILL_AREA_STYLE_COLOUR('',#279624); +#291159 = CURVE_STYLE('',#291160,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291161 = STYLED_ITEM('color',(#291162),#112426); +#291162 = PRESENTATION_STYLE_ASSIGNMENT((#291163,#291168)); +#291163 = SURFACE_STYLE_USAGE(.BOTH.,#291164); +#291164 = SURFACE_SIDE_STYLE('',(#291165)); +#291165 = SURFACE_STYLE_FILL_AREA(#291166); +#291166 = FILL_AREA_STYLE('',(#291167)); +#291167 = FILL_AREA_STYLE_COLOUR('',#279624); +#291168 = CURVE_STYLE('',#291169,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291170 = OVER_RIDING_STYLED_ITEM('overriding color',(#291171),#112440, + #291161); +#291171 = PRESENTATION_STYLE_ASSIGNMENT((#291172,#291177)); +#291172 = SURFACE_STYLE_USAGE(.BOTH.,#291173); +#291173 = SURFACE_SIDE_STYLE('',(#291174)); +#291174 = SURFACE_STYLE_FILL_AREA(#291175); +#291175 = FILL_AREA_STYLE('',(#291176)); +#291176 = FILL_AREA_STYLE_COLOUR('',#280691); +#291177 = CURVE_STYLE('',#291178,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291179 = OVER_RIDING_STYLED_ITEM('overriding color',(#291180),#112456, + #291161); +#291180 = PRESENTATION_STYLE_ASSIGNMENT((#291181,#291186)); +#291181 = SURFACE_STYLE_USAGE(.BOTH.,#291182); +#291182 = SURFACE_SIDE_STYLE('',(#291183)); +#291183 = SURFACE_STYLE_FILL_AREA(#291184); +#291184 = FILL_AREA_STYLE('',(#291185)); +#291185 = FILL_AREA_STYLE_COLOUR('',#280691); +#291186 = CURVE_STYLE('',#291187,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291188 = STYLED_ITEM('color',(#291189),#112482); +#291189 = PRESENTATION_STYLE_ASSIGNMENT((#291190,#291195)); +#291190 = SURFACE_STYLE_USAGE(.BOTH.,#291191); +#291191 = SURFACE_SIDE_STYLE('',(#291192)); +#291192 = SURFACE_STYLE_FILL_AREA(#291193); +#291193 = FILL_AREA_STYLE('',(#291194)); +#291194 = FILL_AREA_STYLE_COLOUR('',#279624); +#291195 = CURVE_STYLE('',#291196,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291197 = STYLED_ITEM('color',(#291198),#112506); +#291198 = PRESENTATION_STYLE_ASSIGNMENT((#291199,#291204)); +#291199 = SURFACE_STYLE_USAGE(.BOTH.,#291200); +#291200 = SURFACE_SIDE_STYLE('',(#291201)); +#291201 = SURFACE_STYLE_FILL_AREA(#291202); +#291202 = FILL_AREA_STYLE('',(#291203)); +#291203 = FILL_AREA_STYLE_COLOUR('',#279624); +#291204 = CURVE_STYLE('',#291205,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291206 = OVER_RIDING_STYLED_ITEM('overriding color',(#291207),#112520, + #291197); +#291207 = PRESENTATION_STYLE_ASSIGNMENT((#291208,#291213)); +#291208 = SURFACE_STYLE_USAGE(.BOTH.,#291209); +#291209 = SURFACE_SIDE_STYLE('',(#291210)); +#291210 = SURFACE_STYLE_FILL_AREA(#291211); +#291211 = FILL_AREA_STYLE('',(#291212)); +#291212 = FILL_AREA_STYLE_COLOUR('',#280691); +#291213 = CURVE_STYLE('',#291214,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291215 = OVER_RIDING_STYLED_ITEM('overriding color',(#291216),#112536, + #291197); +#291216 = PRESENTATION_STYLE_ASSIGNMENT((#291217,#291222)); +#291217 = SURFACE_STYLE_USAGE(.BOTH.,#291218); +#291218 = SURFACE_SIDE_STYLE('',(#291219)); +#291219 = SURFACE_STYLE_FILL_AREA(#291220); +#291220 = FILL_AREA_STYLE('',(#291221)); +#291221 = FILL_AREA_STYLE_COLOUR('',#280691); +#291222 = CURVE_STYLE('',#291223,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291224 = STYLED_ITEM('color',(#291225),#112555); +#291225 = PRESENTATION_STYLE_ASSIGNMENT((#291226,#291231)); +#291226 = SURFACE_STYLE_USAGE(.BOTH.,#291227); +#291227 = SURFACE_SIDE_STYLE('',(#291228)); +#291228 = SURFACE_STYLE_FILL_AREA(#291229); +#291229 = FILL_AREA_STYLE('',(#291230)); +#291230 = FILL_AREA_STYLE_COLOUR('',#279624); +#291231 = CURVE_STYLE('',#291232,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291233 = STYLED_ITEM('color',(#291234),#112586); +#291234 = PRESENTATION_STYLE_ASSIGNMENT((#291235,#291240)); +#291235 = SURFACE_STYLE_USAGE(.BOTH.,#291236); +#291236 = SURFACE_SIDE_STYLE('',(#291237)); +#291237 = SURFACE_STYLE_FILL_AREA(#291238); +#291238 = FILL_AREA_STYLE('',(#291239)); +#291239 = FILL_AREA_STYLE_COLOUR('',#279624); +#291240 = CURVE_STYLE('',#291241,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291242 = OVER_RIDING_STYLED_ITEM('overriding color',(#291243),#112600, + #291233); +#291243 = PRESENTATION_STYLE_ASSIGNMENT((#291244,#291249)); +#291244 = SURFACE_STYLE_USAGE(.BOTH.,#291245); +#291245 = SURFACE_SIDE_STYLE('',(#291246)); +#291246 = SURFACE_STYLE_FILL_AREA(#291247); +#291247 = FILL_AREA_STYLE('',(#291248)); +#291248 = FILL_AREA_STYLE_COLOUR('',#280691); +#291249 = CURVE_STYLE('',#291250,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291251 = OVER_RIDING_STYLED_ITEM('overriding color',(#291252),#112616, + #291233); +#291252 = PRESENTATION_STYLE_ASSIGNMENT((#291253,#291258)); +#291253 = SURFACE_STYLE_USAGE(.BOTH.,#291254); +#291254 = SURFACE_SIDE_STYLE('',(#291255)); +#291255 = SURFACE_STYLE_FILL_AREA(#291256); +#291256 = FILL_AREA_STYLE('',(#291257)); +#291257 = FILL_AREA_STYLE_COLOUR('',#280691); +#291258 = CURVE_STYLE('',#291259,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291260 = STYLED_ITEM('color',(#291261),#112642); +#291261 = PRESENTATION_STYLE_ASSIGNMENT((#291262,#291267)); +#291262 = SURFACE_STYLE_USAGE(.BOTH.,#291263); +#291263 = SURFACE_SIDE_STYLE('',(#291264)); +#291264 = SURFACE_STYLE_FILL_AREA(#291265); +#291265 = FILL_AREA_STYLE('',(#291266)); +#291266 = FILL_AREA_STYLE_COLOUR('',#279624); +#291267 = CURVE_STYLE('',#291268,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291269 = STYLED_ITEM('color',(#291270),#112666); +#291270 = PRESENTATION_STYLE_ASSIGNMENT((#291271,#291276)); +#291271 = SURFACE_STYLE_USAGE(.BOTH.,#291272); +#291272 = SURFACE_SIDE_STYLE('',(#291273)); +#291273 = SURFACE_STYLE_FILL_AREA(#291274); +#291274 = FILL_AREA_STYLE('',(#291275)); +#291275 = FILL_AREA_STYLE_COLOUR('',#279624); +#291276 = CURVE_STYLE('',#291277,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291278 = OVER_RIDING_STYLED_ITEM('overriding color',(#291279),#112680, + #291269); +#291279 = PRESENTATION_STYLE_ASSIGNMENT((#291280,#291285)); +#291280 = SURFACE_STYLE_USAGE(.BOTH.,#291281); +#291281 = SURFACE_SIDE_STYLE('',(#291282)); +#291282 = SURFACE_STYLE_FILL_AREA(#291283); +#291283 = FILL_AREA_STYLE('',(#291284)); +#291284 = FILL_AREA_STYLE_COLOUR('',#280691); +#291285 = CURVE_STYLE('',#291286,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291287 = OVER_RIDING_STYLED_ITEM('overriding color',(#291288),#112696, + #291269); +#291288 = PRESENTATION_STYLE_ASSIGNMENT((#291289,#291294)); +#291289 = SURFACE_STYLE_USAGE(.BOTH.,#291290); +#291290 = SURFACE_SIDE_STYLE('',(#291291)); +#291291 = SURFACE_STYLE_FILL_AREA(#291292); +#291292 = FILL_AREA_STYLE('',(#291293)); +#291293 = FILL_AREA_STYLE_COLOUR('',#280691); +#291294 = CURVE_STYLE('',#291295,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291296 = STYLED_ITEM('color',(#291297),#112715); +#291297 = PRESENTATION_STYLE_ASSIGNMENT((#291298,#291303)); +#291298 = SURFACE_STYLE_USAGE(.BOTH.,#291299); +#291299 = SURFACE_SIDE_STYLE('',(#291300)); +#291300 = SURFACE_STYLE_FILL_AREA(#291301); +#291301 = FILL_AREA_STYLE('',(#291302)); +#291302 = FILL_AREA_STYLE_COLOUR('',#279624); +#291303 = CURVE_STYLE('',#291304,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291305 = STYLED_ITEM('color',(#291306),#112746); +#291306 = PRESENTATION_STYLE_ASSIGNMENT((#291307,#291312)); +#291307 = SURFACE_STYLE_USAGE(.BOTH.,#291308); +#291308 = SURFACE_SIDE_STYLE('',(#291309)); +#291309 = SURFACE_STYLE_FILL_AREA(#291310); +#291310 = FILL_AREA_STYLE('',(#291311)); +#291311 = FILL_AREA_STYLE_COLOUR('',#279624); +#291312 = CURVE_STYLE('',#291313,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291314 = OVER_RIDING_STYLED_ITEM('overriding color',(#291315),#112760, + #291305); +#291315 = PRESENTATION_STYLE_ASSIGNMENT((#291316,#291321)); +#291316 = SURFACE_STYLE_USAGE(.BOTH.,#291317); +#291317 = SURFACE_SIDE_STYLE('',(#291318)); +#291318 = SURFACE_STYLE_FILL_AREA(#291319); +#291319 = FILL_AREA_STYLE('',(#291320)); +#291320 = FILL_AREA_STYLE_COLOUR('',#280691); +#291321 = CURVE_STYLE('',#291322,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291323 = OVER_RIDING_STYLED_ITEM('overriding color',(#291324),#112776, + #291305); +#291324 = PRESENTATION_STYLE_ASSIGNMENT((#291325,#291330)); +#291325 = SURFACE_STYLE_USAGE(.BOTH.,#291326); +#291326 = SURFACE_SIDE_STYLE('',(#291327)); +#291327 = SURFACE_STYLE_FILL_AREA(#291328); +#291328 = FILL_AREA_STYLE('',(#291329)); +#291329 = FILL_AREA_STYLE_COLOUR('',#280691); +#291330 = CURVE_STYLE('',#291331,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291332 = STYLED_ITEM('color',(#291333),#112802); +#291333 = PRESENTATION_STYLE_ASSIGNMENT((#291334,#291339)); +#291334 = SURFACE_STYLE_USAGE(.BOTH.,#291335); +#291335 = SURFACE_SIDE_STYLE('',(#291336)); +#291336 = SURFACE_STYLE_FILL_AREA(#291337); +#291337 = FILL_AREA_STYLE('',(#291338)); +#291338 = FILL_AREA_STYLE_COLOUR('',#279624); +#291339 = CURVE_STYLE('',#291340,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291341 = STYLED_ITEM('color',(#291342),#112826); +#291342 = PRESENTATION_STYLE_ASSIGNMENT((#291343,#291348)); +#291343 = SURFACE_STYLE_USAGE(.BOTH.,#291344); +#291344 = SURFACE_SIDE_STYLE('',(#291345)); +#291345 = SURFACE_STYLE_FILL_AREA(#291346); +#291346 = FILL_AREA_STYLE('',(#291347)); +#291347 = FILL_AREA_STYLE_COLOUR('',#279624); +#291348 = CURVE_STYLE('',#291349,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291350 = OVER_RIDING_STYLED_ITEM('overriding color',(#291351),#112840, + #291341); +#291351 = PRESENTATION_STYLE_ASSIGNMENT((#291352,#291357)); +#291352 = SURFACE_STYLE_USAGE(.BOTH.,#291353); +#291353 = SURFACE_SIDE_STYLE('',(#291354)); +#291354 = SURFACE_STYLE_FILL_AREA(#291355); +#291355 = FILL_AREA_STYLE('',(#291356)); +#291356 = FILL_AREA_STYLE_COLOUR('',#280691); +#291357 = CURVE_STYLE('',#291358,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291359 = OVER_RIDING_STYLED_ITEM('overriding color',(#291360),#112856, + #291341); +#291360 = PRESENTATION_STYLE_ASSIGNMENT((#291361,#291366)); +#291361 = SURFACE_STYLE_USAGE(.BOTH.,#291362); +#291362 = SURFACE_SIDE_STYLE('',(#291363)); +#291363 = SURFACE_STYLE_FILL_AREA(#291364); +#291364 = FILL_AREA_STYLE('',(#291365)); +#291365 = FILL_AREA_STYLE_COLOUR('',#280691); +#291366 = CURVE_STYLE('',#291367,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291368 = STYLED_ITEM('color',(#291369),#112875); +#291369 = PRESENTATION_STYLE_ASSIGNMENT((#291370,#291375)); +#291370 = SURFACE_STYLE_USAGE(.BOTH.,#291371); +#291371 = SURFACE_SIDE_STYLE('',(#291372)); +#291372 = SURFACE_STYLE_FILL_AREA(#291373); +#291373 = FILL_AREA_STYLE('',(#291374)); +#291374 = FILL_AREA_STYLE_COLOUR('',#279624); +#291375 = CURVE_STYLE('',#291376,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291377 = STYLED_ITEM('color',(#291378),#112906); +#291378 = PRESENTATION_STYLE_ASSIGNMENT((#291379,#291384)); +#291379 = SURFACE_STYLE_USAGE(.BOTH.,#291380); +#291380 = SURFACE_SIDE_STYLE('',(#291381)); +#291381 = SURFACE_STYLE_FILL_AREA(#291382); +#291382 = FILL_AREA_STYLE('',(#291383)); +#291383 = FILL_AREA_STYLE_COLOUR('',#279624); +#291384 = CURVE_STYLE('',#291385,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291386 = OVER_RIDING_STYLED_ITEM('overriding color',(#291387),#112920, + #291377); +#291387 = PRESENTATION_STYLE_ASSIGNMENT((#291388,#291393)); +#291388 = SURFACE_STYLE_USAGE(.BOTH.,#291389); +#291389 = SURFACE_SIDE_STYLE('',(#291390)); +#291390 = SURFACE_STYLE_FILL_AREA(#291391); +#291391 = FILL_AREA_STYLE('',(#291392)); +#291392 = FILL_AREA_STYLE_COLOUR('',#280691); +#291393 = CURVE_STYLE('',#291394,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291395 = OVER_RIDING_STYLED_ITEM('overriding color',(#291396),#112936, + #291377); +#291396 = PRESENTATION_STYLE_ASSIGNMENT((#291397,#291402)); +#291397 = SURFACE_STYLE_USAGE(.BOTH.,#291398); +#291398 = SURFACE_SIDE_STYLE('',(#291399)); +#291399 = SURFACE_STYLE_FILL_AREA(#291400); +#291400 = FILL_AREA_STYLE('',(#291401)); +#291401 = FILL_AREA_STYLE_COLOUR('',#280691); +#291402 = CURVE_STYLE('',#291403,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291404 = STYLED_ITEM('color',(#291405),#112962); +#291405 = PRESENTATION_STYLE_ASSIGNMENT((#291406,#291411)); +#291406 = SURFACE_STYLE_USAGE(.BOTH.,#291407); +#291407 = SURFACE_SIDE_STYLE('',(#291408)); +#291408 = SURFACE_STYLE_FILL_AREA(#291409); +#291409 = FILL_AREA_STYLE('',(#291410)); +#291410 = FILL_AREA_STYLE_COLOUR('',#279624); +#291411 = CURVE_STYLE('',#291412,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291413 = STYLED_ITEM('color',(#291414),#112986); +#291414 = PRESENTATION_STYLE_ASSIGNMENT((#291415,#291420)); +#291415 = SURFACE_STYLE_USAGE(.BOTH.,#291416); +#291416 = SURFACE_SIDE_STYLE('',(#291417)); +#291417 = SURFACE_STYLE_FILL_AREA(#291418); +#291418 = FILL_AREA_STYLE('',(#291419)); +#291419 = FILL_AREA_STYLE_COLOUR('',#279624); +#291420 = CURVE_STYLE('',#291421,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291422 = OVER_RIDING_STYLED_ITEM('overriding color',(#291423),#113000, + #291413); +#291423 = PRESENTATION_STYLE_ASSIGNMENT((#291424,#291429)); +#291424 = SURFACE_STYLE_USAGE(.BOTH.,#291425); +#291425 = SURFACE_SIDE_STYLE('',(#291426)); +#291426 = SURFACE_STYLE_FILL_AREA(#291427); +#291427 = FILL_AREA_STYLE('',(#291428)); +#291428 = FILL_AREA_STYLE_COLOUR('',#280691); +#291429 = CURVE_STYLE('',#291430,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291431 = OVER_RIDING_STYLED_ITEM('overriding color',(#291432),#113016, + #291413); +#291432 = PRESENTATION_STYLE_ASSIGNMENT((#291433,#291438)); +#291433 = SURFACE_STYLE_USAGE(.BOTH.,#291434); +#291434 = SURFACE_SIDE_STYLE('',(#291435)); +#291435 = SURFACE_STYLE_FILL_AREA(#291436); +#291436 = FILL_AREA_STYLE('',(#291437)); +#291437 = FILL_AREA_STYLE_COLOUR('',#280691); +#291438 = CURVE_STYLE('',#291439,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291440 = STYLED_ITEM('color',(#291441),#113035); +#291441 = PRESENTATION_STYLE_ASSIGNMENT((#291442,#291447)); +#291442 = SURFACE_STYLE_USAGE(.BOTH.,#291443); +#291443 = SURFACE_SIDE_STYLE('',(#291444)); +#291444 = SURFACE_STYLE_FILL_AREA(#291445); +#291445 = FILL_AREA_STYLE('',(#291446)); +#291446 = FILL_AREA_STYLE_COLOUR('',#279624); +#291447 = CURVE_STYLE('',#291448,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291449 = STYLED_ITEM('color',(#291450),#113066); +#291450 = PRESENTATION_STYLE_ASSIGNMENT((#291451,#291456)); +#291451 = SURFACE_STYLE_USAGE(.BOTH.,#291452); +#291452 = SURFACE_SIDE_STYLE('',(#291453)); +#291453 = SURFACE_STYLE_FILL_AREA(#291454); +#291454 = FILL_AREA_STYLE('',(#291455)); +#291455 = FILL_AREA_STYLE_COLOUR('',#279624); +#291456 = CURVE_STYLE('',#291457,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291458 = OVER_RIDING_STYLED_ITEM('overriding color',(#291459),#113080, + #291449); +#291459 = PRESENTATION_STYLE_ASSIGNMENT((#291460,#291465)); +#291460 = SURFACE_STYLE_USAGE(.BOTH.,#291461); +#291461 = SURFACE_SIDE_STYLE('',(#291462)); +#291462 = SURFACE_STYLE_FILL_AREA(#291463); +#291463 = FILL_AREA_STYLE('',(#291464)); +#291464 = FILL_AREA_STYLE_COLOUR('',#280691); +#291465 = CURVE_STYLE('',#291466,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291467 = OVER_RIDING_STYLED_ITEM('overriding color',(#291468),#113096, + #291449); +#291468 = PRESENTATION_STYLE_ASSIGNMENT((#291469,#291474)); +#291469 = SURFACE_STYLE_USAGE(.BOTH.,#291470); +#291470 = SURFACE_SIDE_STYLE('',(#291471)); +#291471 = SURFACE_STYLE_FILL_AREA(#291472); +#291472 = FILL_AREA_STYLE('',(#291473)); +#291473 = FILL_AREA_STYLE_COLOUR('',#280691); +#291474 = CURVE_STYLE('',#291475,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291476 = STYLED_ITEM('color',(#291477),#113122); +#291477 = PRESENTATION_STYLE_ASSIGNMENT((#291478,#291483)); +#291478 = SURFACE_STYLE_USAGE(.BOTH.,#291479); +#291479 = SURFACE_SIDE_STYLE('',(#291480)); +#291480 = SURFACE_STYLE_FILL_AREA(#291481); +#291481 = FILL_AREA_STYLE('',(#291482)); +#291482 = FILL_AREA_STYLE_COLOUR('',#279624); +#291483 = CURVE_STYLE('',#291484,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291485 = STYLED_ITEM('color',(#291486),#113146); +#291486 = PRESENTATION_STYLE_ASSIGNMENT((#291487,#291492)); +#291487 = SURFACE_STYLE_USAGE(.BOTH.,#291488); +#291488 = SURFACE_SIDE_STYLE('',(#291489)); +#291489 = SURFACE_STYLE_FILL_AREA(#291490); +#291490 = FILL_AREA_STYLE('',(#291491)); +#291491 = FILL_AREA_STYLE_COLOUR('',#279624); +#291492 = CURVE_STYLE('',#291493,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291494 = OVER_RIDING_STYLED_ITEM('overriding color',(#291495),#113160, + #291485); +#291495 = PRESENTATION_STYLE_ASSIGNMENT((#291496,#291501)); +#291496 = SURFACE_STYLE_USAGE(.BOTH.,#291497); +#291497 = SURFACE_SIDE_STYLE('',(#291498)); +#291498 = SURFACE_STYLE_FILL_AREA(#291499); +#291499 = FILL_AREA_STYLE('',(#291500)); +#291500 = FILL_AREA_STYLE_COLOUR('',#280691); +#291501 = CURVE_STYLE('',#291502,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291503 = OVER_RIDING_STYLED_ITEM('overriding color',(#291504),#113176, + #291485); +#291504 = PRESENTATION_STYLE_ASSIGNMENT((#291505,#291510)); +#291505 = SURFACE_STYLE_USAGE(.BOTH.,#291506); +#291506 = SURFACE_SIDE_STYLE('',(#291507)); +#291507 = SURFACE_STYLE_FILL_AREA(#291508); +#291508 = FILL_AREA_STYLE('',(#291509)); +#291509 = FILL_AREA_STYLE_COLOUR('',#280691); +#291510 = CURVE_STYLE('',#291511,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291512 = STYLED_ITEM('color',(#291513),#113195); +#291513 = PRESENTATION_STYLE_ASSIGNMENT((#291514,#291519)); +#291514 = SURFACE_STYLE_USAGE(.BOTH.,#291515); +#291515 = SURFACE_SIDE_STYLE('',(#291516)); +#291516 = SURFACE_STYLE_FILL_AREA(#291517); +#291517 = FILL_AREA_STYLE('',(#291518)); +#291518 = FILL_AREA_STYLE_COLOUR('',#280691); +#291519 = CURVE_STYLE('',#291520,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291521 = STYLED_ITEM('color',(#291522),#113212); +#291522 = PRESENTATION_STYLE_ASSIGNMENT((#291523,#291528)); +#291523 = SURFACE_STYLE_USAGE(.BOTH.,#291524); +#291524 = SURFACE_SIDE_STYLE('',(#291525)); +#291525 = SURFACE_STYLE_FILL_AREA(#291526); +#291526 = FILL_AREA_STYLE('',(#291527)); +#291527 = FILL_AREA_STYLE_COLOUR('',#280691); +#291528 = CURVE_STYLE('',#291529,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291530 = STYLED_ITEM('color',(#291531),#113229); +#291531 = PRESENTATION_STYLE_ASSIGNMENT((#291532,#291537)); +#291532 = SURFACE_STYLE_USAGE(.BOTH.,#291533); +#291533 = SURFACE_SIDE_STYLE('',(#291534)); +#291534 = SURFACE_STYLE_FILL_AREA(#291535); +#291535 = FILL_AREA_STYLE('',(#291536)); +#291536 = FILL_AREA_STYLE_COLOUR('',#280691); +#291537 = CURVE_STYLE('',#291538,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291539 = STYLED_ITEM('color',(#291540),#113246); +#291540 = PRESENTATION_STYLE_ASSIGNMENT((#291541,#291546)); +#291541 = SURFACE_STYLE_USAGE(.BOTH.,#291542); +#291542 = SURFACE_SIDE_STYLE('',(#291543)); +#291543 = SURFACE_STYLE_FILL_AREA(#291544); +#291544 = FILL_AREA_STYLE('',(#291545)); +#291545 = FILL_AREA_STYLE_COLOUR('',#280691); +#291546 = CURVE_STYLE('',#291547,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291548 = STYLED_ITEM('color',(#291549),#113263); +#291549 = PRESENTATION_STYLE_ASSIGNMENT((#291550,#291555)); +#291550 = SURFACE_STYLE_USAGE(.BOTH.,#291551); +#291551 = SURFACE_SIDE_STYLE('',(#291552)); +#291552 = SURFACE_STYLE_FILL_AREA(#291553); +#291553 = FILL_AREA_STYLE('',(#291554)); +#291554 = FILL_AREA_STYLE_COLOUR('',#280691); +#291555 = CURVE_STYLE('',#291556,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291557 = STYLED_ITEM('color',(#291558),#113275); +#291558 = PRESENTATION_STYLE_ASSIGNMENT((#291559,#291564)); +#291559 = SURFACE_STYLE_USAGE(.BOTH.,#291560); +#291560 = SURFACE_SIDE_STYLE('',(#291561)); +#291561 = SURFACE_STYLE_FILL_AREA(#291562); +#291562 = FILL_AREA_STYLE('',(#291563)); +#291563 = FILL_AREA_STYLE_COLOUR('',#280691); +#291564 = CURVE_STYLE('',#291565,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291566 = STYLED_ITEM('color',(#291567),#113292); +#291567 = PRESENTATION_STYLE_ASSIGNMENT((#291568,#291573)); +#291568 = SURFACE_STYLE_USAGE(.BOTH.,#291569); +#291569 = SURFACE_SIDE_STYLE('',(#291570)); +#291570 = SURFACE_STYLE_FILL_AREA(#291571); +#291571 = FILL_AREA_STYLE('',(#291572)); +#291572 = FILL_AREA_STYLE_COLOUR('',#280691); +#291573 = CURVE_STYLE('',#291574,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291575 = STYLED_ITEM('color',(#291576),#113309); +#291576 = PRESENTATION_STYLE_ASSIGNMENT((#291577,#291582)); +#291577 = SURFACE_STYLE_USAGE(.BOTH.,#291578); +#291578 = SURFACE_SIDE_STYLE('',(#291579)); +#291579 = SURFACE_STYLE_FILL_AREA(#291580); +#291580 = FILL_AREA_STYLE('',(#291581)); +#291581 = FILL_AREA_STYLE_COLOUR('',#280691); +#291582 = CURVE_STYLE('',#291583,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291584 = STYLED_ITEM('color',(#291585),#113326); +#291585 = PRESENTATION_STYLE_ASSIGNMENT((#291586,#291591)); +#291586 = SURFACE_STYLE_USAGE(.BOTH.,#291587); +#291587 = SURFACE_SIDE_STYLE('',(#291588)); +#291588 = SURFACE_STYLE_FILL_AREA(#291589); +#291589 = FILL_AREA_STYLE('',(#291590)); +#291590 = FILL_AREA_STYLE_COLOUR('',#280691); +#291591 = CURVE_STYLE('',#291592,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291593 = STYLED_ITEM('color',(#291594),#113343); +#291594 = PRESENTATION_STYLE_ASSIGNMENT((#291595,#291600)); +#291595 = SURFACE_STYLE_USAGE(.BOTH.,#291596); +#291596 = SURFACE_SIDE_STYLE('',(#291597)); +#291597 = SURFACE_STYLE_FILL_AREA(#291598); +#291598 = FILL_AREA_STYLE('',(#291599)); +#291599 = FILL_AREA_STYLE_COLOUR('',#280691); +#291600 = CURVE_STYLE('',#291601,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291602 = STYLED_ITEM('color',(#291603),#113355); +#291603 = PRESENTATION_STYLE_ASSIGNMENT((#291604,#291609)); +#291604 = SURFACE_STYLE_USAGE(.BOTH.,#291605); +#291605 = SURFACE_SIDE_STYLE('',(#291606)); +#291606 = SURFACE_STYLE_FILL_AREA(#291607); +#291607 = FILL_AREA_STYLE('',(#291608)); +#291608 = FILL_AREA_STYLE_COLOUR('',#280691); +#291609 = CURVE_STYLE('',#291610,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291610 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291611 = STYLED_ITEM('color',(#291612),#113372); +#291612 = PRESENTATION_STYLE_ASSIGNMENT((#291613,#291618)); +#291613 = SURFACE_STYLE_USAGE(.BOTH.,#291614); +#291614 = SURFACE_SIDE_STYLE('',(#291615)); +#291615 = SURFACE_STYLE_FILL_AREA(#291616); +#291616 = FILL_AREA_STYLE('',(#291617)); +#291617 = FILL_AREA_STYLE_COLOUR('',#280691); +#291618 = CURVE_STYLE('',#291619,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291619 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291620 = STYLED_ITEM('color',(#291621),#113389); +#291621 = PRESENTATION_STYLE_ASSIGNMENT((#291622,#291627)); +#291622 = SURFACE_STYLE_USAGE(.BOTH.,#291623); +#291623 = SURFACE_SIDE_STYLE('',(#291624)); +#291624 = SURFACE_STYLE_FILL_AREA(#291625); +#291625 = FILL_AREA_STYLE('',(#291626)); +#291626 = FILL_AREA_STYLE_COLOUR('',#280691); +#291627 = CURVE_STYLE('',#291628,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291628 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291629 = STYLED_ITEM('color',(#291630),#113406); +#291630 = PRESENTATION_STYLE_ASSIGNMENT((#291631,#291636)); +#291631 = SURFACE_STYLE_USAGE(.BOTH.,#291632); +#291632 = SURFACE_SIDE_STYLE('',(#291633)); +#291633 = SURFACE_STYLE_FILL_AREA(#291634); +#291634 = FILL_AREA_STYLE('',(#291635)); +#291635 = FILL_AREA_STYLE_COLOUR('',#280691); +#291636 = CURVE_STYLE('',#291637,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291637 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291638 = STYLED_ITEM('color',(#291639),#113423); +#291639 = PRESENTATION_STYLE_ASSIGNMENT((#291640,#291645)); +#291640 = SURFACE_STYLE_USAGE(.BOTH.,#291641); +#291641 = SURFACE_SIDE_STYLE('',(#291642)); +#291642 = SURFACE_STYLE_FILL_AREA(#291643); +#291643 = FILL_AREA_STYLE('',(#291644)); +#291644 = FILL_AREA_STYLE_COLOUR('',#280691); +#291645 = CURVE_STYLE('',#291646,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291647 = STYLED_ITEM('color',(#291648),#113435); +#291648 = PRESENTATION_STYLE_ASSIGNMENT((#291649,#291654)); +#291649 = SURFACE_STYLE_USAGE(.BOTH.,#291650); +#291650 = SURFACE_SIDE_STYLE('',(#291651)); +#291651 = SURFACE_STYLE_FILL_AREA(#291652); +#291652 = FILL_AREA_STYLE('',(#291653)); +#291653 = FILL_AREA_STYLE_COLOUR('',#280691); +#291654 = CURVE_STYLE('',#291655,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291655 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291656 = STYLED_ITEM('color',(#291657),#113452); +#291657 = PRESENTATION_STYLE_ASSIGNMENT((#291658,#291663)); +#291658 = SURFACE_STYLE_USAGE(.BOTH.,#291659); +#291659 = SURFACE_SIDE_STYLE('',(#291660)); +#291660 = SURFACE_STYLE_FILL_AREA(#291661); +#291661 = FILL_AREA_STYLE('',(#291662)); +#291662 = FILL_AREA_STYLE_COLOUR('',#280691); +#291663 = CURVE_STYLE('',#291664,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291664 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291665 = STYLED_ITEM('color',(#291666),#113469); +#291666 = PRESENTATION_STYLE_ASSIGNMENT((#291667,#291672)); +#291667 = SURFACE_STYLE_USAGE(.BOTH.,#291668); +#291668 = SURFACE_SIDE_STYLE('',(#291669)); +#291669 = SURFACE_STYLE_FILL_AREA(#291670); +#291670 = FILL_AREA_STYLE('',(#291671)); +#291671 = FILL_AREA_STYLE_COLOUR('',#280691); +#291672 = CURVE_STYLE('',#291673,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291673 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291674 = STYLED_ITEM('color',(#291675),#113486); +#291675 = PRESENTATION_STYLE_ASSIGNMENT((#291676,#291681)); +#291676 = SURFACE_STYLE_USAGE(.BOTH.,#291677); +#291677 = SURFACE_SIDE_STYLE('',(#291678)); +#291678 = SURFACE_STYLE_FILL_AREA(#291679); +#291679 = FILL_AREA_STYLE('',(#291680)); +#291680 = FILL_AREA_STYLE_COLOUR('',#280691); +#291681 = CURVE_STYLE('',#291682,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291682 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291683 = STYLED_ITEM('color',(#291684),#113503); +#291684 = PRESENTATION_STYLE_ASSIGNMENT((#291685,#291690)); +#291685 = SURFACE_STYLE_USAGE(.BOTH.,#291686); +#291686 = SURFACE_SIDE_STYLE('',(#291687)); +#291687 = SURFACE_STYLE_FILL_AREA(#291688); +#291688 = FILL_AREA_STYLE('',(#291689)); +#291689 = FILL_AREA_STYLE_COLOUR('',#280691); +#291690 = CURVE_STYLE('',#291691,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291691 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291692 = STYLED_ITEM('color',(#291693),#113515); +#291693 = PRESENTATION_STYLE_ASSIGNMENT((#291694,#291699)); +#291694 = SURFACE_STYLE_USAGE(.BOTH.,#291695); +#291695 = SURFACE_SIDE_STYLE('',(#291696)); +#291696 = SURFACE_STYLE_FILL_AREA(#291697); +#291697 = FILL_AREA_STYLE('',(#291698)); +#291698 = FILL_AREA_STYLE_COLOUR('',#280691); +#291699 = CURVE_STYLE('',#291700,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291700 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291701 = STYLED_ITEM('color',(#291702),#113532); +#291702 = PRESENTATION_STYLE_ASSIGNMENT((#291703,#291708)); +#291703 = SURFACE_STYLE_USAGE(.BOTH.,#291704); +#291704 = SURFACE_SIDE_STYLE('',(#291705)); +#291705 = SURFACE_STYLE_FILL_AREA(#291706); +#291706 = FILL_AREA_STYLE('',(#291707)); +#291707 = FILL_AREA_STYLE_COLOUR('',#280691); +#291708 = CURVE_STYLE('',#291709,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291709 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291710 = STYLED_ITEM('color',(#291711),#113549); +#291711 = PRESENTATION_STYLE_ASSIGNMENT((#291712,#291717)); +#291712 = SURFACE_STYLE_USAGE(.BOTH.,#291713); +#291713 = SURFACE_SIDE_STYLE('',(#291714)); +#291714 = SURFACE_STYLE_FILL_AREA(#291715); +#291715 = FILL_AREA_STYLE('',(#291716)); +#291716 = FILL_AREA_STYLE_COLOUR('',#280691); +#291717 = CURVE_STYLE('',#291718,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291718 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291719 = STYLED_ITEM('color',(#291720),#113566); +#291720 = PRESENTATION_STYLE_ASSIGNMENT((#291721,#291726)); +#291721 = SURFACE_STYLE_USAGE(.BOTH.,#291722); +#291722 = SURFACE_SIDE_STYLE('',(#291723)); +#291723 = SURFACE_STYLE_FILL_AREA(#291724); +#291724 = FILL_AREA_STYLE('',(#291725)); +#291725 = FILL_AREA_STYLE_COLOUR('',#280691); +#291726 = CURVE_STYLE('',#291727,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291727 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291728 = STYLED_ITEM('color',(#291729),#113583); +#291729 = PRESENTATION_STYLE_ASSIGNMENT((#291730,#291735)); +#291730 = SURFACE_STYLE_USAGE(.BOTH.,#291731); +#291731 = SURFACE_SIDE_STYLE('',(#291732)); +#291732 = SURFACE_STYLE_FILL_AREA(#291733); +#291733 = FILL_AREA_STYLE('',(#291734)); +#291734 = FILL_AREA_STYLE_COLOUR('',#280691); +#291735 = CURVE_STYLE('',#291736,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291736 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291737 = STYLED_ITEM('color',(#291738),#113595); +#291738 = PRESENTATION_STYLE_ASSIGNMENT((#291739,#291744)); +#291739 = SURFACE_STYLE_USAGE(.BOTH.,#291740); +#291740 = SURFACE_SIDE_STYLE('',(#291741)); +#291741 = SURFACE_STYLE_FILL_AREA(#291742); +#291742 = FILL_AREA_STYLE('',(#291743)); +#291743 = FILL_AREA_STYLE_COLOUR('',#280691); +#291744 = CURVE_STYLE('',#291745,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291745 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291746 = STYLED_ITEM('color',(#291747),#113612); +#291747 = PRESENTATION_STYLE_ASSIGNMENT((#291748,#291753)); +#291748 = SURFACE_STYLE_USAGE(.BOTH.,#291749); +#291749 = SURFACE_SIDE_STYLE('',(#291750)); +#291750 = SURFACE_STYLE_FILL_AREA(#291751); +#291751 = FILL_AREA_STYLE('',(#291752)); +#291752 = FILL_AREA_STYLE_COLOUR('',#280691); +#291753 = CURVE_STYLE('',#291754,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291754 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291755 = STYLED_ITEM('color',(#291756),#113629); +#291756 = PRESENTATION_STYLE_ASSIGNMENT((#291757,#291762)); +#291757 = SURFACE_STYLE_USAGE(.BOTH.,#291758); +#291758 = SURFACE_SIDE_STYLE('',(#291759)); +#291759 = SURFACE_STYLE_FILL_AREA(#291760); +#291760 = FILL_AREA_STYLE('',(#291761)); +#291761 = FILL_AREA_STYLE_COLOUR('',#280691); +#291762 = CURVE_STYLE('',#291763,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291763 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291764 = STYLED_ITEM('color',(#291765),#113646); +#291765 = PRESENTATION_STYLE_ASSIGNMENT((#291766,#291771)); +#291766 = SURFACE_STYLE_USAGE(.BOTH.,#291767); +#291767 = SURFACE_SIDE_STYLE('',(#291768)); +#291768 = SURFACE_STYLE_FILL_AREA(#291769); +#291769 = FILL_AREA_STYLE('',(#291770)); +#291770 = FILL_AREA_STYLE_COLOUR('',#280691); +#291771 = CURVE_STYLE('',#291772,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291772 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291773 = STYLED_ITEM('color',(#291774),#113663); +#291774 = PRESENTATION_STYLE_ASSIGNMENT((#291775,#291780)); +#291775 = SURFACE_STYLE_USAGE(.BOTH.,#291776); +#291776 = SURFACE_SIDE_STYLE('',(#291777)); +#291777 = SURFACE_STYLE_FILL_AREA(#291778); +#291778 = FILL_AREA_STYLE('',(#291779)); +#291779 = FILL_AREA_STYLE_COLOUR('',#280691); +#291780 = CURVE_STYLE('',#291781,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291781 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291782 = STYLED_ITEM('color',(#291783),#113675); +#291783 = PRESENTATION_STYLE_ASSIGNMENT((#291784,#291789)); +#291784 = SURFACE_STYLE_USAGE(.BOTH.,#291785); +#291785 = SURFACE_SIDE_STYLE('',(#291786)); +#291786 = SURFACE_STYLE_FILL_AREA(#291787); +#291787 = FILL_AREA_STYLE('',(#291788)); +#291788 = FILL_AREA_STYLE_COLOUR('',#279624); +#291789 = CURVE_STYLE('',#291790,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291790 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291791 = OVER_RIDING_STYLED_ITEM('overriding color',(#291792),#113682, + #291782); +#291792 = PRESENTATION_STYLE_ASSIGNMENT((#291793,#291798)); +#291793 = SURFACE_STYLE_USAGE(.BOTH.,#291794); +#291794 = SURFACE_SIDE_STYLE('',(#291795)); +#291795 = SURFACE_STYLE_FILL_AREA(#291796); +#291796 = FILL_AREA_STYLE('',(#291797)); +#291797 = FILL_AREA_STYLE_COLOUR('',#280691); +#291798 = CURVE_STYLE('',#291799,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291799 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291800 = STYLED_ITEM('color',(#291801),#113692); +#291801 = PRESENTATION_STYLE_ASSIGNMENT((#291802,#291807)); +#291802 = SURFACE_STYLE_USAGE(.BOTH.,#291803); +#291803 = SURFACE_SIDE_STYLE('',(#291804)); +#291804 = SURFACE_STYLE_FILL_AREA(#291805); +#291805 = FILL_AREA_STYLE('',(#291806)); +#291806 = FILL_AREA_STYLE_COLOUR('',#279624); +#291807 = CURVE_STYLE('',#291808,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291808 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291809 = OVER_RIDING_STYLED_ITEM('overriding color',(#291810),#113697, + #291800); +#291810 = PRESENTATION_STYLE_ASSIGNMENT((#291811,#291816)); +#291811 = SURFACE_STYLE_USAGE(.BOTH.,#291812); +#291812 = SURFACE_SIDE_STYLE('',(#291813)); +#291813 = SURFACE_STYLE_FILL_AREA(#291814); +#291814 = FILL_AREA_STYLE('',(#291815)); +#291815 = FILL_AREA_STYLE_COLOUR('',#280691); +#291816 = CURVE_STYLE('',#291817,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291817 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291818 = STYLED_ITEM('color',(#291819),#113709); +#291819 = PRESENTATION_STYLE_ASSIGNMENT((#291820,#291825)); +#291820 = SURFACE_STYLE_USAGE(.BOTH.,#291821); +#291821 = SURFACE_SIDE_STYLE('',(#291822)); +#291822 = SURFACE_STYLE_FILL_AREA(#291823); +#291823 = FILL_AREA_STYLE('',(#291824)); +#291824 = FILL_AREA_STYLE_COLOUR('',#280691); +#291825 = CURVE_STYLE('',#291826,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291827 = STYLED_ITEM('color',(#291828),#113758); +#291828 = PRESENTATION_STYLE_ASSIGNMENT((#291829,#291834)); +#291829 = SURFACE_STYLE_USAGE(.BOTH.,#291830); +#291830 = SURFACE_SIDE_STYLE('',(#291831)); +#291831 = SURFACE_STYLE_FILL_AREA(#291832); +#291832 = FILL_AREA_STYLE('',(#291833)); +#291833 = FILL_AREA_STYLE_COLOUR('',#280691); +#291834 = CURVE_STYLE('',#291835,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291835 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291836 = STYLED_ITEM('color',(#291837),#113782); +#291837 = PRESENTATION_STYLE_ASSIGNMENT((#291838,#291843)); +#291838 = SURFACE_STYLE_USAGE(.BOTH.,#291839); +#291839 = SURFACE_SIDE_STYLE('',(#291840)); +#291840 = SURFACE_STYLE_FILL_AREA(#291841); +#291841 = FILL_AREA_STYLE('',(#291842)); +#291842 = FILL_AREA_STYLE_COLOUR('',#280691); +#291843 = CURVE_STYLE('',#291844,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291844 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291845 = STYLED_ITEM('color',(#291846),#113824); +#291846 = PRESENTATION_STYLE_ASSIGNMENT((#291847,#291852)); +#291847 = SURFACE_STYLE_USAGE(.BOTH.,#291848); +#291848 = SURFACE_SIDE_STYLE('',(#291849)); +#291849 = SURFACE_STYLE_FILL_AREA(#291850); +#291850 = FILL_AREA_STYLE('',(#291851)); +#291851 = FILL_AREA_STYLE_COLOUR('',#280691); +#291852 = CURVE_STYLE('',#291853,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291853 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291854 = STYLED_ITEM('color',(#291855),#113841); +#291855 = PRESENTATION_STYLE_ASSIGNMENT((#291856,#291861)); +#291856 = SURFACE_STYLE_USAGE(.BOTH.,#291857); +#291857 = SURFACE_SIDE_STYLE('',(#291858)); +#291858 = SURFACE_STYLE_FILL_AREA(#291859); +#291859 = FILL_AREA_STYLE('',(#291860)); +#291860 = FILL_AREA_STYLE_COLOUR('',#279624); +#291861 = CURVE_STYLE('',#291862,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291862 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291863 = OVER_RIDING_STYLED_ITEM('overriding color',(#291864),#113848, + #291854); +#291864 = PRESENTATION_STYLE_ASSIGNMENT((#291865,#291870)); +#291865 = SURFACE_STYLE_USAGE(.BOTH.,#291866); +#291866 = SURFACE_SIDE_STYLE('',(#291867)); +#291867 = SURFACE_STYLE_FILL_AREA(#291868); +#291868 = FILL_AREA_STYLE('',(#291869)); +#291869 = FILL_AREA_STYLE_COLOUR('',#280691); +#291870 = CURVE_STYLE('',#291871,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291871 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291872 = STYLED_ITEM('color',(#291873),#113858); +#291873 = PRESENTATION_STYLE_ASSIGNMENT((#291874,#291879)); +#291874 = SURFACE_STYLE_USAGE(.BOTH.,#291875); +#291875 = SURFACE_SIDE_STYLE('',(#291876)); +#291876 = SURFACE_STYLE_FILL_AREA(#291877); +#291877 = FILL_AREA_STYLE('',(#291878)); +#291878 = FILL_AREA_STYLE_COLOUR('',#279624); +#291879 = CURVE_STYLE('',#291880,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291880 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291881 = OVER_RIDING_STYLED_ITEM('overriding color',(#291882),#113863, + #291872); +#291882 = PRESENTATION_STYLE_ASSIGNMENT((#291883,#291888)); +#291883 = SURFACE_STYLE_USAGE(.BOTH.,#291884); +#291884 = SURFACE_SIDE_STYLE('',(#291885)); +#291885 = SURFACE_STYLE_FILL_AREA(#291886); +#291886 = FILL_AREA_STYLE('',(#291887)); +#291887 = FILL_AREA_STYLE_COLOUR('',#280691); +#291888 = CURVE_STYLE('',#291889,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291889 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291890 = STYLED_ITEM('color',(#291891),#113875); +#291891 = PRESENTATION_STYLE_ASSIGNMENT((#291892,#291897)); +#291892 = SURFACE_STYLE_USAGE(.BOTH.,#291893); +#291893 = SURFACE_SIDE_STYLE('',(#291894)); +#291894 = SURFACE_STYLE_FILL_AREA(#291895); +#291895 = FILL_AREA_STYLE('',(#291896)); +#291896 = FILL_AREA_STYLE_COLOUR('',#280691); +#291897 = CURVE_STYLE('',#291898,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291898 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291899 = STYLED_ITEM('color',(#291900),#113924); +#291900 = PRESENTATION_STYLE_ASSIGNMENT((#291901,#291906)); +#291901 = SURFACE_STYLE_USAGE(.BOTH.,#291902); +#291902 = SURFACE_SIDE_STYLE('',(#291903)); +#291903 = SURFACE_STYLE_FILL_AREA(#291904); +#291904 = FILL_AREA_STYLE('',(#291905)); +#291905 = FILL_AREA_STYLE_COLOUR('',#280691); +#291906 = CURVE_STYLE('',#291907,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291907 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291908 = STYLED_ITEM('color',(#291909),#113948); +#291909 = PRESENTATION_STYLE_ASSIGNMENT((#291910,#291915)); +#291910 = SURFACE_STYLE_USAGE(.BOTH.,#291911); +#291911 = SURFACE_SIDE_STYLE('',(#291912)); +#291912 = SURFACE_STYLE_FILL_AREA(#291913); +#291913 = FILL_AREA_STYLE('',(#291914)); +#291914 = FILL_AREA_STYLE_COLOUR('',#280691); +#291915 = CURVE_STYLE('',#291916,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291916 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291917 = STYLED_ITEM('color',(#291918),#113990); +#291918 = PRESENTATION_STYLE_ASSIGNMENT((#291919,#291924)); +#291919 = SURFACE_STYLE_USAGE(.BOTH.,#291920); +#291920 = SURFACE_SIDE_STYLE('',(#291921)); +#291921 = SURFACE_STYLE_FILL_AREA(#291922); +#291922 = FILL_AREA_STYLE('',(#291923)); +#291923 = FILL_AREA_STYLE_COLOUR('',#280691); +#291924 = CURVE_STYLE('',#291925,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291926 = STYLED_ITEM('color',(#291927),#114007); +#291927 = PRESENTATION_STYLE_ASSIGNMENT((#291928,#291933)); +#291928 = SURFACE_STYLE_USAGE(.BOTH.,#291929); +#291929 = SURFACE_SIDE_STYLE('',(#291930)); +#291930 = SURFACE_STYLE_FILL_AREA(#291931); +#291931 = FILL_AREA_STYLE('',(#291932)); +#291932 = FILL_AREA_STYLE_COLOUR('',#279624); +#291933 = CURVE_STYLE('',#291934,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291934 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291935 = OVER_RIDING_STYLED_ITEM('overriding color',(#291936),#114014, + #291926); +#291936 = PRESENTATION_STYLE_ASSIGNMENT((#291937,#291942)); +#291937 = SURFACE_STYLE_USAGE(.BOTH.,#291938); +#291938 = SURFACE_SIDE_STYLE('',(#291939)); +#291939 = SURFACE_STYLE_FILL_AREA(#291940); +#291940 = FILL_AREA_STYLE('',(#291941)); +#291941 = FILL_AREA_STYLE_COLOUR('',#280691); +#291942 = CURVE_STYLE('',#291943,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291943 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291944 = STYLED_ITEM('color',(#291945),#114024); +#291945 = PRESENTATION_STYLE_ASSIGNMENT((#291946,#291951)); +#291946 = SURFACE_STYLE_USAGE(.BOTH.,#291947); +#291947 = SURFACE_SIDE_STYLE('',(#291948)); +#291948 = SURFACE_STYLE_FILL_AREA(#291949); +#291949 = FILL_AREA_STYLE('',(#291950)); +#291950 = FILL_AREA_STYLE_COLOUR('',#279624); +#291951 = CURVE_STYLE('',#291952,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#291952 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291953 = OVER_RIDING_STYLED_ITEM('overriding color',(#291954),#114029, + #291944); +#291954 = PRESENTATION_STYLE_ASSIGNMENT((#291955,#291960)); +#291955 = SURFACE_STYLE_USAGE(.BOTH.,#291956); +#291956 = SURFACE_SIDE_STYLE('',(#291957)); +#291957 = SURFACE_STYLE_FILL_AREA(#291958); +#291958 = FILL_AREA_STYLE('',(#291959)); +#291959 = FILL_AREA_STYLE_COLOUR('',#280691); +#291960 = CURVE_STYLE('',#291961,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291961 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291962 = STYLED_ITEM('color',(#291963),#114041); +#291963 = PRESENTATION_STYLE_ASSIGNMENT((#291964,#291969)); +#291964 = SURFACE_STYLE_USAGE(.BOTH.,#291965); +#291965 = SURFACE_SIDE_STYLE('',(#291966)); +#291966 = SURFACE_STYLE_FILL_AREA(#291967); +#291967 = FILL_AREA_STYLE('',(#291968)); +#291968 = FILL_AREA_STYLE_COLOUR('',#280691); +#291969 = CURVE_STYLE('',#291970,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291970 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291971 = STYLED_ITEM('color',(#291972),#114090); +#291972 = PRESENTATION_STYLE_ASSIGNMENT((#291973,#291978)); +#291973 = SURFACE_STYLE_USAGE(.BOTH.,#291974); +#291974 = SURFACE_SIDE_STYLE('',(#291975)); +#291975 = SURFACE_STYLE_FILL_AREA(#291976); +#291976 = FILL_AREA_STYLE('',(#291977)); +#291977 = FILL_AREA_STYLE_COLOUR('',#280691); +#291978 = CURVE_STYLE('',#291979,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291980 = STYLED_ITEM('color',(#291981),#114114); +#291981 = PRESENTATION_STYLE_ASSIGNMENT((#291982,#291987)); +#291982 = SURFACE_STYLE_USAGE(.BOTH.,#291983); +#291983 = SURFACE_SIDE_STYLE('',(#291984)); +#291984 = SURFACE_STYLE_FILL_AREA(#291985); +#291985 = FILL_AREA_STYLE('',(#291986)); +#291986 = FILL_AREA_STYLE_COLOUR('',#280691); +#291987 = CURVE_STYLE('',#291988,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291988 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291989 = STYLED_ITEM('color',(#291990),#114156); +#291990 = PRESENTATION_STYLE_ASSIGNMENT((#291991,#291996)); +#291991 = SURFACE_STYLE_USAGE(.BOTH.,#291992); +#291992 = SURFACE_SIDE_STYLE('',(#291993)); +#291993 = SURFACE_STYLE_FILL_AREA(#291994); +#291994 = FILL_AREA_STYLE('',(#291995)); +#291995 = FILL_AREA_STYLE_COLOUR('',#280691); +#291996 = CURVE_STYLE('',#291997,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#291997 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291998 = STYLED_ITEM('color',(#291999),#114173); +#291999 = PRESENTATION_STYLE_ASSIGNMENT((#292000,#292005)); +#292000 = SURFACE_STYLE_USAGE(.BOTH.,#292001); +#292001 = SURFACE_SIDE_STYLE('',(#292002)); +#292002 = SURFACE_STYLE_FILL_AREA(#292003); +#292003 = FILL_AREA_STYLE('',(#292004)); +#292004 = FILL_AREA_STYLE_COLOUR('',#279624); +#292005 = CURVE_STYLE('',#292006,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#292006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292007 = OVER_RIDING_STYLED_ITEM('overriding color',(#292008),#114180, + #291998); +#292008 = PRESENTATION_STYLE_ASSIGNMENT((#292009,#292014)); +#292009 = SURFACE_STYLE_USAGE(.BOTH.,#292010); +#292010 = SURFACE_SIDE_STYLE('',(#292011)); +#292011 = SURFACE_STYLE_FILL_AREA(#292012); +#292012 = FILL_AREA_STYLE('',(#292013)); +#292013 = FILL_AREA_STYLE_COLOUR('',#280691); +#292014 = CURVE_STYLE('',#292015,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292015 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292016 = STYLED_ITEM('color',(#292017),#114190); +#292017 = PRESENTATION_STYLE_ASSIGNMENT((#292018,#292023)); +#292018 = SURFACE_STYLE_USAGE(.BOTH.,#292019); +#292019 = SURFACE_SIDE_STYLE('',(#292020)); +#292020 = SURFACE_STYLE_FILL_AREA(#292021); +#292021 = FILL_AREA_STYLE('',(#292022)); +#292022 = FILL_AREA_STYLE_COLOUR('',#279624); +#292023 = CURVE_STYLE('',#292024,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#292024 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292025 = OVER_RIDING_STYLED_ITEM('overriding color',(#292026),#114195, + #292016); +#292026 = PRESENTATION_STYLE_ASSIGNMENT((#292027,#292032)); +#292027 = SURFACE_STYLE_USAGE(.BOTH.,#292028); +#292028 = SURFACE_SIDE_STYLE('',(#292029)); +#292029 = SURFACE_STYLE_FILL_AREA(#292030); +#292030 = FILL_AREA_STYLE('',(#292031)); +#292031 = FILL_AREA_STYLE_COLOUR('',#280691); +#292032 = CURVE_STYLE('',#292033,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292034 = STYLED_ITEM('color',(#292035),#114207); +#292035 = PRESENTATION_STYLE_ASSIGNMENT((#292036,#292041)); +#292036 = SURFACE_STYLE_USAGE(.BOTH.,#292037); +#292037 = SURFACE_SIDE_STYLE('',(#292038)); +#292038 = SURFACE_STYLE_FILL_AREA(#292039); +#292039 = FILL_AREA_STYLE('',(#292040)); +#292040 = FILL_AREA_STYLE_COLOUR('',#280691); +#292041 = CURVE_STYLE('',#292042,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292042 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292043 = STYLED_ITEM('color',(#292044),#114256); +#292044 = PRESENTATION_STYLE_ASSIGNMENT((#292045,#292050)); +#292045 = SURFACE_STYLE_USAGE(.BOTH.,#292046); +#292046 = SURFACE_SIDE_STYLE('',(#292047)); +#292047 = SURFACE_STYLE_FILL_AREA(#292048); +#292048 = FILL_AREA_STYLE('',(#292049)); +#292049 = FILL_AREA_STYLE_COLOUR('',#280691); +#292050 = CURVE_STYLE('',#292051,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292051 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292052 = STYLED_ITEM('color',(#292053),#114280); +#292053 = PRESENTATION_STYLE_ASSIGNMENT((#292054,#292059)); +#292054 = SURFACE_STYLE_USAGE(.BOTH.,#292055); +#292055 = SURFACE_SIDE_STYLE('',(#292056)); +#292056 = SURFACE_STYLE_FILL_AREA(#292057); +#292057 = FILL_AREA_STYLE('',(#292058)); +#292058 = FILL_AREA_STYLE_COLOUR('',#280691); +#292059 = CURVE_STYLE('',#292060,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292060 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292061 = STYLED_ITEM('color',(#292062),#114322); +#292062 = PRESENTATION_STYLE_ASSIGNMENT((#292063,#292068)); +#292063 = SURFACE_STYLE_USAGE(.BOTH.,#292064); +#292064 = SURFACE_SIDE_STYLE('',(#292065)); +#292065 = SURFACE_STYLE_FILL_AREA(#292066); +#292066 = FILL_AREA_STYLE('',(#292067)); +#292067 = FILL_AREA_STYLE_COLOUR('',#280691); +#292068 = CURVE_STYLE('',#292069,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292069 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292070 = STYLED_ITEM('color',(#292071),#114339); +#292071 = PRESENTATION_STYLE_ASSIGNMENT((#292072,#292077)); +#292072 = SURFACE_STYLE_USAGE(.BOTH.,#292073); +#292073 = SURFACE_SIDE_STYLE('',(#292074)); +#292074 = SURFACE_STYLE_FILL_AREA(#292075); +#292075 = FILL_AREA_STYLE('',(#292076)); +#292076 = FILL_AREA_STYLE_COLOUR('',#279624); +#292077 = CURVE_STYLE('',#292078,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#292078 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292079 = OVER_RIDING_STYLED_ITEM('overriding color',(#292080),#114346, + #292070); +#292080 = PRESENTATION_STYLE_ASSIGNMENT((#292081,#292086)); +#292081 = SURFACE_STYLE_USAGE(.BOTH.,#292082); +#292082 = SURFACE_SIDE_STYLE('',(#292083)); +#292083 = SURFACE_STYLE_FILL_AREA(#292084); +#292084 = FILL_AREA_STYLE('',(#292085)); +#292085 = FILL_AREA_STYLE_COLOUR('',#280691); +#292086 = CURVE_STYLE('',#292087,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292087 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292088 = STYLED_ITEM('color',(#292089),#114356); +#292089 = PRESENTATION_STYLE_ASSIGNMENT((#292090,#292095)); +#292090 = SURFACE_STYLE_USAGE(.BOTH.,#292091); +#292091 = SURFACE_SIDE_STYLE('',(#292092)); +#292092 = SURFACE_STYLE_FILL_AREA(#292093); +#292093 = FILL_AREA_STYLE('',(#292094)); +#292094 = FILL_AREA_STYLE_COLOUR('',#279624); +#292095 = CURVE_STYLE('',#292096,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#292096 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292097 = OVER_RIDING_STYLED_ITEM('overriding color',(#292098),#114361, + #292088); +#292098 = PRESENTATION_STYLE_ASSIGNMENT((#292099,#292104)); +#292099 = SURFACE_STYLE_USAGE(.BOTH.,#292100); +#292100 = SURFACE_SIDE_STYLE('',(#292101)); +#292101 = SURFACE_STYLE_FILL_AREA(#292102); +#292102 = FILL_AREA_STYLE('',(#292103)); +#292103 = FILL_AREA_STYLE_COLOUR('',#280691); +#292104 = CURVE_STYLE('',#292105,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292105 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292106 = STYLED_ITEM('color',(#292107),#114373); +#292107 = PRESENTATION_STYLE_ASSIGNMENT((#292108,#292113)); +#292108 = SURFACE_STYLE_USAGE(.BOTH.,#292109); +#292109 = SURFACE_SIDE_STYLE('',(#292110)); +#292110 = SURFACE_STYLE_FILL_AREA(#292111); +#292111 = FILL_AREA_STYLE('',(#292112)); +#292112 = FILL_AREA_STYLE_COLOUR('',#280691); +#292113 = CURVE_STYLE('',#292114,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292114 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292115 = STYLED_ITEM('color',(#292116),#114422); +#292116 = PRESENTATION_STYLE_ASSIGNMENT((#292117,#292122)); +#292117 = SURFACE_STYLE_USAGE(.BOTH.,#292118); +#292118 = SURFACE_SIDE_STYLE('',(#292119)); +#292119 = SURFACE_STYLE_FILL_AREA(#292120); +#292120 = FILL_AREA_STYLE('',(#292121)); +#292121 = FILL_AREA_STYLE_COLOUR('',#280691); +#292122 = CURVE_STYLE('',#292123,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292123 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292124 = STYLED_ITEM('color',(#292125),#114446); +#292125 = PRESENTATION_STYLE_ASSIGNMENT((#292126,#292131)); +#292126 = SURFACE_STYLE_USAGE(.BOTH.,#292127); +#292127 = SURFACE_SIDE_STYLE('',(#292128)); +#292128 = SURFACE_STYLE_FILL_AREA(#292129); +#292129 = FILL_AREA_STYLE('',(#292130)); +#292130 = FILL_AREA_STYLE_COLOUR('',#280691); +#292131 = CURVE_STYLE('',#292132,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292132 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292133 = STYLED_ITEM('color',(#292134),#114488); +#292134 = PRESENTATION_STYLE_ASSIGNMENT((#292135,#292140)); +#292135 = SURFACE_STYLE_USAGE(.BOTH.,#292136); +#292136 = SURFACE_SIDE_STYLE('',(#292137)); +#292137 = SURFACE_STYLE_FILL_AREA(#292138); +#292138 = FILL_AREA_STYLE('',(#292139)); +#292139 = FILL_AREA_STYLE_COLOUR('',#280691); +#292140 = CURVE_STYLE('',#292141,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292141 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292142 = STYLED_ITEM('color',(#292143),#114505); +#292143 = PRESENTATION_STYLE_ASSIGNMENT((#292144,#292149)); +#292144 = SURFACE_STYLE_USAGE(.BOTH.,#292145); +#292145 = SURFACE_SIDE_STYLE('',(#292146)); +#292146 = SURFACE_STYLE_FILL_AREA(#292147); +#292147 = FILL_AREA_STYLE('',(#292148)); +#292148 = FILL_AREA_STYLE_COLOUR('',#279624); +#292149 = CURVE_STYLE('',#292150,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#292150 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292151 = OVER_RIDING_STYLED_ITEM('overriding color',(#292152),#114512, + #292142); +#292152 = PRESENTATION_STYLE_ASSIGNMENT((#292153,#292158)); +#292153 = SURFACE_STYLE_USAGE(.BOTH.,#292154); +#292154 = SURFACE_SIDE_STYLE('',(#292155)); +#292155 = SURFACE_STYLE_FILL_AREA(#292156); +#292156 = FILL_AREA_STYLE('',(#292157)); +#292157 = FILL_AREA_STYLE_COLOUR('',#280691); +#292158 = CURVE_STYLE('',#292159,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292159 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292160 = STYLED_ITEM('color',(#292161),#114522); +#292161 = PRESENTATION_STYLE_ASSIGNMENT((#292162,#292167)); +#292162 = SURFACE_STYLE_USAGE(.BOTH.,#292163); +#292163 = SURFACE_SIDE_STYLE('',(#292164)); +#292164 = SURFACE_STYLE_FILL_AREA(#292165); +#292165 = FILL_AREA_STYLE('',(#292166)); +#292166 = FILL_AREA_STYLE_COLOUR('',#279624); +#292167 = CURVE_STYLE('',#292168,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#292168 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292169 = OVER_RIDING_STYLED_ITEM('overriding color',(#292170),#114527, + #292160); +#292170 = PRESENTATION_STYLE_ASSIGNMENT((#292171,#292176)); +#292171 = SURFACE_STYLE_USAGE(.BOTH.,#292172); +#292172 = SURFACE_SIDE_STYLE('',(#292173)); +#292173 = SURFACE_STYLE_FILL_AREA(#292174); +#292174 = FILL_AREA_STYLE('',(#292175)); +#292175 = FILL_AREA_STYLE_COLOUR('',#280691); +#292176 = CURVE_STYLE('',#292177,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292177 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292178 = STYLED_ITEM('color',(#292179),#114539); +#292179 = PRESENTATION_STYLE_ASSIGNMENT((#292180,#292185)); +#292180 = SURFACE_STYLE_USAGE(.BOTH.,#292181); +#292181 = SURFACE_SIDE_STYLE('',(#292182)); +#292182 = SURFACE_STYLE_FILL_AREA(#292183); +#292183 = FILL_AREA_STYLE('',(#292184)); +#292184 = FILL_AREA_STYLE_COLOUR('',#280691); +#292185 = CURVE_STYLE('',#292186,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292186 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292187 = STYLED_ITEM('color',(#292188),#114588); +#292188 = PRESENTATION_STYLE_ASSIGNMENT((#292189,#292194)); +#292189 = SURFACE_STYLE_USAGE(.BOTH.,#292190); +#292190 = SURFACE_SIDE_STYLE('',(#292191)); +#292191 = SURFACE_STYLE_FILL_AREA(#292192); +#292192 = FILL_AREA_STYLE('',(#292193)); +#292193 = FILL_AREA_STYLE_COLOUR('',#280691); +#292194 = CURVE_STYLE('',#292195,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292195 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292196 = STYLED_ITEM('color',(#292197),#114612); +#292197 = PRESENTATION_STYLE_ASSIGNMENT((#292198,#292203)); +#292198 = SURFACE_STYLE_USAGE(.BOTH.,#292199); +#292199 = SURFACE_SIDE_STYLE('',(#292200)); +#292200 = SURFACE_STYLE_FILL_AREA(#292201); +#292201 = FILL_AREA_STYLE('',(#292202)); +#292202 = FILL_AREA_STYLE_COLOUR('',#280691); +#292203 = CURVE_STYLE('',#292204,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292204 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292205 = STYLED_ITEM('color',(#292206),#114654); +#292206 = PRESENTATION_STYLE_ASSIGNMENT((#292207,#292212)); +#292207 = SURFACE_STYLE_USAGE(.BOTH.,#292208); +#292208 = SURFACE_SIDE_STYLE('',(#292209)); +#292209 = SURFACE_STYLE_FILL_AREA(#292210); +#292210 = FILL_AREA_STYLE('',(#292211)); +#292211 = FILL_AREA_STYLE_COLOUR('',#280691); +#292212 = CURVE_STYLE('',#292213,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292213 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292214 = STYLED_ITEM('color',(#292215),#114671); +#292215 = PRESENTATION_STYLE_ASSIGNMENT((#292216,#292221)); +#292216 = SURFACE_STYLE_USAGE(.BOTH.,#292217); +#292217 = SURFACE_SIDE_STYLE('',(#292218)); +#292218 = SURFACE_STYLE_FILL_AREA(#292219); +#292219 = FILL_AREA_STYLE('',(#292220)); +#292220 = FILL_AREA_STYLE_COLOUR('',#280691); +#292221 = CURVE_STYLE('',#292222,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292222 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292223 = STYLED_ITEM('color',(#292224),#114688); +#292224 = PRESENTATION_STYLE_ASSIGNMENT((#292225,#292230)); +#292225 = SURFACE_STYLE_USAGE(.BOTH.,#292226); +#292226 = SURFACE_SIDE_STYLE('',(#292227)); +#292227 = SURFACE_STYLE_FILL_AREA(#292228); +#292228 = FILL_AREA_STYLE('',(#292229)); +#292229 = FILL_AREA_STYLE_COLOUR('',#280691); +#292230 = CURVE_STYLE('',#292231,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292231 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292232 = STYLED_ITEM('color',(#292233),#114705); +#292233 = PRESENTATION_STYLE_ASSIGNMENT((#292234,#292239)); +#292234 = SURFACE_STYLE_USAGE(.BOTH.,#292235); +#292235 = SURFACE_SIDE_STYLE('',(#292236)); +#292236 = SURFACE_STYLE_FILL_AREA(#292237); +#292237 = FILL_AREA_STYLE('',(#292238)); +#292238 = FILL_AREA_STYLE_COLOUR('',#280691); +#292239 = CURVE_STYLE('',#292240,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292240 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292241 = STYLED_ITEM('color',(#292242),#114717); +#292242 = PRESENTATION_STYLE_ASSIGNMENT((#292243,#292248)); +#292243 = SURFACE_STYLE_USAGE(.BOTH.,#292244); +#292244 = SURFACE_SIDE_STYLE('',(#292245)); +#292245 = SURFACE_STYLE_FILL_AREA(#292246); +#292246 = FILL_AREA_STYLE('',(#292247)); +#292247 = FILL_AREA_STYLE_COLOUR('',#280691); +#292248 = CURVE_STYLE('',#292249,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292249 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292250 = STYLED_ITEM('color',(#292251),#114734); +#292251 = PRESENTATION_STYLE_ASSIGNMENT((#292252,#292257)); +#292252 = SURFACE_STYLE_USAGE(.BOTH.,#292253); +#292253 = SURFACE_SIDE_STYLE('',(#292254)); +#292254 = SURFACE_STYLE_FILL_AREA(#292255); +#292255 = FILL_AREA_STYLE('',(#292256)); +#292256 = FILL_AREA_STYLE_COLOUR('',#280691); +#292257 = CURVE_STYLE('',#292258,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292258 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292259 = STYLED_ITEM('color',(#292260),#114751); +#292260 = PRESENTATION_STYLE_ASSIGNMENT((#292261,#292266)); +#292261 = SURFACE_STYLE_USAGE(.BOTH.,#292262); +#292262 = SURFACE_SIDE_STYLE('',(#292263)); +#292263 = SURFACE_STYLE_FILL_AREA(#292264); +#292264 = FILL_AREA_STYLE('',(#292265)); +#292265 = FILL_AREA_STYLE_COLOUR('',#280691); +#292266 = CURVE_STYLE('',#292267,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292267 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292268 = STYLED_ITEM('color',(#292269),#114763); +#292269 = PRESENTATION_STYLE_ASSIGNMENT((#292270,#292275)); +#292270 = SURFACE_STYLE_USAGE(.BOTH.,#292271); +#292271 = SURFACE_SIDE_STYLE('',(#292272)); +#292272 = SURFACE_STYLE_FILL_AREA(#292273); +#292273 = FILL_AREA_STYLE('',(#292274)); +#292274 = FILL_AREA_STYLE_COLOUR('',#280691); +#292275 = CURVE_STYLE('',#292276,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292276 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292277 = STYLED_ITEM('color',(#292278),#114780); +#292278 = PRESENTATION_STYLE_ASSIGNMENT((#292279,#292284)); +#292279 = SURFACE_STYLE_USAGE(.BOTH.,#292280); +#292280 = SURFACE_SIDE_STYLE('',(#292281)); +#292281 = SURFACE_STYLE_FILL_AREA(#292282); +#292282 = FILL_AREA_STYLE('',(#292283)); +#292283 = FILL_AREA_STYLE_COLOUR('',#280691); +#292284 = CURVE_STYLE('',#292285,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292285 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292286 = STYLED_ITEM('color',(#292287),#114797); +#292287 = PRESENTATION_STYLE_ASSIGNMENT((#292288,#292293)); +#292288 = SURFACE_STYLE_USAGE(.BOTH.,#292289); +#292289 = SURFACE_SIDE_STYLE('',(#292290)); +#292290 = SURFACE_STYLE_FILL_AREA(#292291); +#292291 = FILL_AREA_STYLE('',(#292292)); +#292292 = FILL_AREA_STYLE_COLOUR('',#280691); +#292293 = CURVE_STYLE('',#292294,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292294 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292295 = STYLED_ITEM('color',(#292296),#114809); +#292296 = PRESENTATION_STYLE_ASSIGNMENT((#292297,#292302)); +#292297 = SURFACE_STYLE_USAGE(.BOTH.,#292298); +#292298 = SURFACE_SIDE_STYLE('',(#292299)); +#292299 = SURFACE_STYLE_FILL_AREA(#292300); +#292300 = FILL_AREA_STYLE('',(#292301)); +#292301 = FILL_AREA_STYLE_COLOUR('',#280691); +#292302 = CURVE_STYLE('',#292303,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292303 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292304 = STYLED_ITEM('color',(#292305),#114826); +#292305 = PRESENTATION_STYLE_ASSIGNMENT((#292306,#292311)); +#292306 = SURFACE_STYLE_USAGE(.BOTH.,#292307); +#292307 = SURFACE_SIDE_STYLE('',(#292308)); +#292308 = SURFACE_STYLE_FILL_AREA(#292309); +#292309 = FILL_AREA_STYLE('',(#292310)); +#292310 = FILL_AREA_STYLE_COLOUR('',#280691); +#292311 = CURVE_STYLE('',#292312,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292312 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292313 = STYLED_ITEM('color',(#292314),#114843); +#292314 = PRESENTATION_STYLE_ASSIGNMENT((#292315,#292320)); +#292315 = SURFACE_STYLE_USAGE(.BOTH.,#292316); +#292316 = SURFACE_SIDE_STYLE('',(#292317)); +#292317 = SURFACE_STYLE_FILL_AREA(#292318); +#292318 = FILL_AREA_STYLE('',(#292319)); +#292319 = FILL_AREA_STYLE_COLOUR('',#280691); +#292320 = CURVE_STYLE('',#292321,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292321 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292322 = STYLED_ITEM('color',(#292323),#114855); +#292323 = PRESENTATION_STYLE_ASSIGNMENT((#292324,#292329)); +#292324 = SURFACE_STYLE_USAGE(.BOTH.,#292325); +#292325 = SURFACE_SIDE_STYLE('',(#292326)); +#292326 = SURFACE_STYLE_FILL_AREA(#292327); +#292327 = FILL_AREA_STYLE('',(#292328)); +#292328 = FILL_AREA_STYLE_COLOUR('',#280691); +#292329 = CURVE_STYLE('',#292330,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292330 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292331 = STYLED_ITEM('color',(#292332),#114872); +#292332 = PRESENTATION_STYLE_ASSIGNMENT((#292333,#292338)); +#292333 = SURFACE_STYLE_USAGE(.BOTH.,#292334); +#292334 = SURFACE_SIDE_STYLE('',(#292335)); +#292335 = SURFACE_STYLE_FILL_AREA(#292336); +#292336 = FILL_AREA_STYLE('',(#292337)); +#292337 = FILL_AREA_STYLE_COLOUR('',#280691); +#292338 = CURVE_STYLE('',#292339,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292339 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292340 = STYLED_ITEM('color',(#292341),#114889); +#292341 = PRESENTATION_STYLE_ASSIGNMENT((#292342,#292347)); +#292342 = SURFACE_STYLE_USAGE(.BOTH.,#292343); +#292343 = SURFACE_SIDE_STYLE('',(#292344)); +#292344 = SURFACE_STYLE_FILL_AREA(#292345); +#292345 = FILL_AREA_STYLE('',(#292346)); +#292346 = FILL_AREA_STYLE_COLOUR('',#280691); +#292347 = CURVE_STYLE('',#292348,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292348 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292349 = STYLED_ITEM('color',(#292350),#114901); +#292350 = PRESENTATION_STYLE_ASSIGNMENT((#292351,#292356)); +#292351 = SURFACE_STYLE_USAGE(.BOTH.,#292352); +#292352 = SURFACE_SIDE_STYLE('',(#292353)); +#292353 = SURFACE_STYLE_FILL_AREA(#292354); +#292354 = FILL_AREA_STYLE('',(#292355)); +#292355 = FILL_AREA_STYLE_COLOUR('',#280691); +#292356 = CURVE_STYLE('',#292357,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292357 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292358 = STYLED_ITEM('color',(#292359),#114918); +#292359 = PRESENTATION_STYLE_ASSIGNMENT((#292360,#292365)); +#292360 = SURFACE_STYLE_USAGE(.BOTH.,#292361); +#292361 = SURFACE_SIDE_STYLE('',(#292362)); +#292362 = SURFACE_STYLE_FILL_AREA(#292363); +#292363 = FILL_AREA_STYLE('',(#292364)); +#292364 = FILL_AREA_STYLE_COLOUR('',#280691); +#292365 = CURVE_STYLE('',#292366,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292366 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292367 = STYLED_ITEM('color',(#292368),#114935); +#292368 = PRESENTATION_STYLE_ASSIGNMENT((#292369,#292374)); +#292369 = SURFACE_STYLE_USAGE(.BOTH.,#292370); +#292370 = SURFACE_SIDE_STYLE('',(#292371)); +#292371 = SURFACE_STYLE_FILL_AREA(#292372); +#292372 = FILL_AREA_STYLE('',(#292373)); +#292373 = FILL_AREA_STYLE_COLOUR('',#280691); +#292374 = CURVE_STYLE('',#292375,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#292375 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292376 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #292377,#292384,#292391,#292398,#292405,#292412,#292419,#292426, + #292433,#292440,#292447,#292454,#292461,#292468,#292475,#292482, + #292489,#292496,#292503,#292510,#292517,#292524,#292531,#292538, + #292545,#292552,#292559,#292566,#292573,#292580,#292587,#292594, + #292601,#292608,#292615,#292622,#292629,#292636,#292643,#292650, + #292657,#292664,#292671,#292678,#292685,#292692,#292699,#292706, + #292713,#292720,#292727,#292734,#292741,#292748,#292755,#292762, + #292769,#292776,#292783,#292790,#292797,#292804,#292811),#88945); +#292377 = STYLED_ITEM('color',(#292378),#87147); +#292378 = PRESENTATION_STYLE_ASSIGNMENT((#292379)); +#292379 = SURFACE_STYLE_USAGE(.BOTH.,#292380); +#292380 = SURFACE_SIDE_STYLE('',(#292381)); +#292381 = SURFACE_STYLE_FILL_AREA(#292382); +#292382 = FILL_AREA_STYLE('',(#292383)); +#292383 = FILL_AREA_STYLE_COLOUR('',#279624); +#292384 = STYLED_ITEM('color',(#292385),#87211); +#292385 = PRESENTATION_STYLE_ASSIGNMENT((#292386)); +#292386 = SURFACE_STYLE_USAGE(.BOTH.,#292387); +#292387 = SURFACE_SIDE_STYLE('',(#292388)); +#292388 = SURFACE_STYLE_FILL_AREA(#292389); +#292389 = FILL_AREA_STYLE('',(#292390)); +#292390 = FILL_AREA_STYLE_COLOUR('',#279624); +#292391 = STYLED_ITEM('color',(#292392),#87251); +#292392 = PRESENTATION_STYLE_ASSIGNMENT((#292393)); +#292393 = SURFACE_STYLE_USAGE(.BOTH.,#292394); +#292394 = SURFACE_SIDE_STYLE('',(#292395)); +#292395 = SURFACE_STYLE_FILL_AREA(#292396); +#292396 = FILL_AREA_STYLE('',(#292397)); +#292397 = FILL_AREA_STYLE_COLOUR('',#279624); +#292398 = STYLED_ITEM('color',(#292399),#87276); +#292399 = PRESENTATION_STYLE_ASSIGNMENT((#292400)); +#292400 = SURFACE_STYLE_USAGE(.BOTH.,#292401); +#292401 = SURFACE_SIDE_STYLE('',(#292402)); +#292402 = SURFACE_STYLE_FILL_AREA(#292403); +#292403 = FILL_AREA_STYLE('',(#292404)); +#292404 = FILL_AREA_STYLE_COLOUR('',#279624); +#292405 = STYLED_ITEM('color',(#292406),#87300); +#292406 = PRESENTATION_STYLE_ASSIGNMENT((#292407)); +#292407 = SURFACE_STYLE_USAGE(.BOTH.,#292408); +#292408 = SURFACE_SIDE_STYLE('',(#292409)); +#292409 = SURFACE_STYLE_FILL_AREA(#292410); +#292410 = FILL_AREA_STYLE('',(#292411)); +#292411 = FILL_AREA_STYLE_COLOUR('',#279624); +#292412 = STYLED_ITEM('color',(#292413),#87399); +#292413 = PRESENTATION_STYLE_ASSIGNMENT((#292414)); +#292414 = SURFACE_STYLE_USAGE(.BOTH.,#292415); +#292415 = SURFACE_SIDE_STYLE('',(#292416)); +#292416 = SURFACE_STYLE_FILL_AREA(#292417); +#292417 = FILL_AREA_STYLE('',(#292418)); +#292418 = FILL_AREA_STYLE_COLOUR('',#279624); +#292419 = STYLED_ITEM('color',(#292420),#87432); +#292420 = PRESENTATION_STYLE_ASSIGNMENT((#292421)); +#292421 = SURFACE_STYLE_USAGE(.BOTH.,#292422); +#292422 = SURFACE_SIDE_STYLE('',(#292423)); +#292423 = SURFACE_STYLE_FILL_AREA(#292424); +#292424 = FILL_AREA_STYLE('',(#292425)); +#292425 = FILL_AREA_STYLE_COLOUR('',#279624); +#292426 = STYLED_ITEM('color',(#292427),#87770); +#292427 = PRESENTATION_STYLE_ASSIGNMENT((#292428)); +#292428 = SURFACE_STYLE_USAGE(.BOTH.,#292429); +#292429 = SURFACE_SIDE_STYLE('',(#292430)); +#292430 = SURFACE_STYLE_FILL_AREA(#292431); +#292431 = FILL_AREA_STYLE('',(#292432)); +#292432 = FILL_AREA_STYLE_COLOUR('',#279624); +#292433 = STYLED_ITEM('color',(#292434),#87861); +#292434 = PRESENTATION_STYLE_ASSIGNMENT((#292435)); +#292435 = SURFACE_STYLE_USAGE(.BOTH.,#292436); +#292436 = SURFACE_SIDE_STYLE('',(#292437)); +#292437 = SURFACE_STYLE_FILL_AREA(#292438); +#292438 = FILL_AREA_STYLE('',(#292439)); +#292439 = FILL_AREA_STYLE_COLOUR('',#279624); +#292440 = STYLED_ITEM('color',(#292441),#87910); +#292441 = PRESENTATION_STYLE_ASSIGNMENT((#292442)); +#292442 = SURFACE_STYLE_USAGE(.BOTH.,#292443); +#292443 = SURFACE_SIDE_STYLE('',(#292444)); +#292444 = SURFACE_STYLE_FILL_AREA(#292445); +#292445 = FILL_AREA_STYLE('',(#292446)); +#292446 = FILL_AREA_STYLE_COLOUR('',#279624); +#292447 = STYLED_ITEM('color',(#292448),#87935); +#292448 = PRESENTATION_STYLE_ASSIGNMENT((#292449)); +#292449 = SURFACE_STYLE_USAGE(.BOTH.,#292450); +#292450 = SURFACE_SIDE_STYLE('',(#292451)); +#292451 = SURFACE_STYLE_FILL_AREA(#292452); +#292452 = FILL_AREA_STYLE('',(#292453)); +#292453 = FILL_AREA_STYLE_COLOUR('',#279624); +#292454 = STYLED_ITEM('color',(#292455),#87953); +#292455 = PRESENTATION_STYLE_ASSIGNMENT((#292456)); +#292456 = SURFACE_STYLE_USAGE(.BOTH.,#292457); +#292457 = SURFACE_SIDE_STYLE('',(#292458)); +#292458 = SURFACE_STYLE_FILL_AREA(#292459); +#292459 = FILL_AREA_STYLE('',(#292460)); +#292460 = FILL_AREA_STYLE_COLOUR('',#279624); +#292461 = STYLED_ITEM('color',(#292462),#87970); +#292462 = PRESENTATION_STYLE_ASSIGNMENT((#292463)); +#292463 = SURFACE_STYLE_USAGE(.BOTH.,#292464); +#292464 = SURFACE_SIDE_STYLE('',(#292465)); +#292465 = SURFACE_STYLE_FILL_AREA(#292466); +#292466 = FILL_AREA_STYLE('',(#292467)); +#292467 = FILL_AREA_STYLE_COLOUR('',#279624); +#292468 = STYLED_ITEM('color',(#292469),#87987); +#292469 = PRESENTATION_STYLE_ASSIGNMENT((#292470)); +#292470 = SURFACE_STYLE_USAGE(.BOTH.,#292471); +#292471 = SURFACE_SIDE_STYLE('',(#292472)); +#292472 = SURFACE_STYLE_FILL_AREA(#292473); +#292473 = FILL_AREA_STYLE('',(#292474)); +#292474 = FILL_AREA_STYLE_COLOUR('',#279624); +#292475 = STYLED_ITEM('color',(#292476),#88004); +#292476 = PRESENTATION_STYLE_ASSIGNMENT((#292477)); +#292477 = SURFACE_STYLE_USAGE(.BOTH.,#292478); +#292478 = SURFACE_SIDE_STYLE('',(#292479)); +#292479 = SURFACE_STYLE_FILL_AREA(#292480); +#292480 = FILL_AREA_STYLE('',(#292481)); +#292481 = FILL_AREA_STYLE_COLOUR('',#279624); +#292482 = STYLED_ITEM('color',(#292483),#88021); +#292483 = PRESENTATION_STYLE_ASSIGNMENT((#292484)); +#292484 = SURFACE_STYLE_USAGE(.BOTH.,#292485); +#292485 = SURFACE_SIDE_STYLE('',(#292486)); +#292486 = SURFACE_STYLE_FILL_AREA(#292487); +#292487 = FILL_AREA_STYLE('',(#292488)); +#292488 = FILL_AREA_STYLE_COLOUR('',#279624); +#292489 = STYLED_ITEM('color',(#292490),#88038); +#292490 = PRESENTATION_STYLE_ASSIGNMENT((#292491)); +#292491 = SURFACE_STYLE_USAGE(.BOTH.,#292492); +#292492 = SURFACE_SIDE_STYLE('',(#292493)); +#292493 = SURFACE_STYLE_FILL_AREA(#292494); +#292494 = FILL_AREA_STYLE('',(#292495)); +#292495 = FILL_AREA_STYLE_COLOUR('',#279624); +#292496 = STYLED_ITEM('color',(#292497),#88062); +#292497 = PRESENTATION_STYLE_ASSIGNMENT((#292498)); +#292498 = SURFACE_STYLE_USAGE(.BOTH.,#292499); +#292499 = SURFACE_SIDE_STYLE('',(#292500)); +#292500 = SURFACE_STYLE_FILL_AREA(#292501); +#292501 = FILL_AREA_STYLE('',(#292502)); +#292502 = FILL_AREA_STYLE_COLOUR('',#279624); +#292503 = STYLED_ITEM('color',(#292504),#88072); +#292504 = PRESENTATION_STYLE_ASSIGNMENT((#292505)); +#292505 = SURFACE_STYLE_USAGE(.BOTH.,#292506); +#292506 = SURFACE_SIDE_STYLE('',(#292507)); +#292507 = SURFACE_STYLE_FILL_AREA(#292508); +#292508 = FILL_AREA_STYLE('',(#292509)); +#292509 = FILL_AREA_STYLE_COLOUR('',#279624); +#292510 = STYLED_ITEM('color',(#292511),#88096); +#292511 = PRESENTATION_STYLE_ASSIGNMENT((#292512)); +#292512 = SURFACE_STYLE_USAGE(.BOTH.,#292513); +#292513 = SURFACE_SIDE_STYLE('',(#292514)); +#292514 = SURFACE_STYLE_FILL_AREA(#292515); +#292515 = FILL_AREA_STYLE('',(#292516)); +#292516 = FILL_AREA_STYLE_COLOUR('',#279624); +#292517 = STYLED_ITEM('color',(#292518),#88106); +#292518 = PRESENTATION_STYLE_ASSIGNMENT((#292519)); +#292519 = SURFACE_STYLE_USAGE(.BOTH.,#292520); +#292520 = SURFACE_SIDE_STYLE('',(#292521)); +#292521 = SURFACE_STYLE_FILL_AREA(#292522); +#292522 = FILL_AREA_STYLE('',(#292523)); +#292523 = FILL_AREA_STYLE_COLOUR('',#279624); +#292524 = STYLED_ITEM('color',(#292525),#88130); +#292525 = PRESENTATION_STYLE_ASSIGNMENT((#292526)); +#292526 = SURFACE_STYLE_USAGE(.BOTH.,#292527); +#292527 = SURFACE_SIDE_STYLE('',(#292528)); +#292528 = SURFACE_STYLE_FILL_AREA(#292529); +#292529 = FILL_AREA_STYLE('',(#292530)); +#292530 = FILL_AREA_STYLE_COLOUR('',#279624); +#292531 = STYLED_ITEM('color',(#292532),#88140); +#292532 = PRESENTATION_STYLE_ASSIGNMENT((#292533)); +#292533 = SURFACE_STYLE_USAGE(.BOTH.,#292534); +#292534 = SURFACE_SIDE_STYLE('',(#292535)); +#292535 = SURFACE_STYLE_FILL_AREA(#292536); +#292536 = FILL_AREA_STYLE('',(#292537)); +#292537 = FILL_AREA_STYLE_COLOUR('',#279624); +#292538 = STYLED_ITEM('color',(#292539),#88164); +#292539 = PRESENTATION_STYLE_ASSIGNMENT((#292540)); +#292540 = SURFACE_STYLE_USAGE(.BOTH.,#292541); +#292541 = SURFACE_SIDE_STYLE('',(#292542)); +#292542 = SURFACE_STYLE_FILL_AREA(#292543); +#292543 = FILL_AREA_STYLE('',(#292544)); +#292544 = FILL_AREA_STYLE_COLOUR('',#279624); +#292545 = STYLED_ITEM('color',(#292546),#88174); +#292546 = PRESENTATION_STYLE_ASSIGNMENT((#292547)); +#292547 = SURFACE_STYLE_USAGE(.BOTH.,#292548); +#292548 = SURFACE_SIDE_STYLE('',(#292549)); +#292549 = SURFACE_STYLE_FILL_AREA(#292550); +#292550 = FILL_AREA_STYLE('',(#292551)); +#292551 = FILL_AREA_STYLE_COLOUR('',#282540); +#292552 = STYLED_ITEM('color',(#292553),#88205); +#292553 = PRESENTATION_STYLE_ASSIGNMENT((#292554)); +#292554 = SURFACE_STYLE_USAGE(.BOTH.,#292555); +#292555 = SURFACE_SIDE_STYLE('',(#292556)); +#292556 = SURFACE_STYLE_FILL_AREA(#292557); +#292557 = FILL_AREA_STYLE('',(#292558)); +#292558 = FILL_AREA_STYLE_COLOUR('',#282540); +#292559 = STYLED_ITEM('color',(#292560),#88229); +#292560 = PRESENTATION_STYLE_ASSIGNMENT((#292561)); +#292561 = SURFACE_STYLE_USAGE(.BOTH.,#292562); +#292562 = SURFACE_SIDE_STYLE('',(#292563)); +#292563 = SURFACE_STYLE_FILL_AREA(#292564); +#292564 = FILL_AREA_STYLE('',(#292565)); +#292565 = FILL_AREA_STYLE_COLOUR('',#282540); +#292566 = STYLED_ITEM('color',(#292567),#88253); +#292567 = PRESENTATION_STYLE_ASSIGNMENT((#292568)); +#292568 = SURFACE_STYLE_USAGE(.BOTH.,#292569); +#292569 = SURFACE_SIDE_STYLE('',(#292570)); +#292570 = SURFACE_STYLE_FILL_AREA(#292571); +#292571 = FILL_AREA_STYLE('',(#292572)); +#292572 = FILL_AREA_STYLE_COLOUR('',#282540); +#292573 = STYLED_ITEM('color',(#292574),#88270); +#292574 = PRESENTATION_STYLE_ASSIGNMENT((#292575)); +#292575 = SURFACE_STYLE_USAGE(.BOTH.,#292576); +#292576 = SURFACE_SIDE_STYLE('',(#292577)); +#292577 = SURFACE_STYLE_FILL_AREA(#292578); +#292578 = FILL_AREA_STYLE('',(#292579)); +#292579 = FILL_AREA_STYLE_COLOUR('',#282540); +#292580 = STYLED_ITEM('color',(#292581),#88301); +#292581 = PRESENTATION_STYLE_ASSIGNMENT((#292582)); +#292582 = SURFACE_STYLE_USAGE(.BOTH.,#292583); +#292583 = SURFACE_SIDE_STYLE('',(#292584)); +#292584 = SURFACE_STYLE_FILL_AREA(#292585); +#292585 = FILL_AREA_STYLE('',(#292586)); +#292586 = FILL_AREA_STYLE_COLOUR('',#282540); +#292587 = STYLED_ITEM('color',(#292588),#88325); +#292588 = PRESENTATION_STYLE_ASSIGNMENT((#292589)); +#292589 = SURFACE_STYLE_USAGE(.BOTH.,#292590); +#292590 = SURFACE_SIDE_STYLE('',(#292591)); +#292591 = SURFACE_STYLE_FILL_AREA(#292592); +#292592 = FILL_AREA_STYLE('',(#292593)); +#292593 = FILL_AREA_STYLE_COLOUR('',#282540); +#292594 = STYLED_ITEM('color',(#292595),#88349); +#292595 = PRESENTATION_STYLE_ASSIGNMENT((#292596)); +#292596 = SURFACE_STYLE_USAGE(.BOTH.,#292597); +#292597 = SURFACE_SIDE_STYLE('',(#292598)); +#292598 = SURFACE_STYLE_FILL_AREA(#292599); +#292599 = FILL_AREA_STYLE('',(#292600)); +#292600 = FILL_AREA_STYLE_COLOUR('',#282540); +#292601 = STYLED_ITEM('color',(#292602),#88366); +#292602 = PRESENTATION_STYLE_ASSIGNMENT((#292603)); +#292603 = SURFACE_STYLE_USAGE(.BOTH.,#292604); +#292604 = SURFACE_SIDE_STYLE('',(#292605)); +#292605 = SURFACE_STYLE_FILL_AREA(#292606); +#292606 = FILL_AREA_STYLE('',(#292607)); +#292607 = FILL_AREA_STYLE_COLOUR('',#282540); +#292608 = STYLED_ITEM('color',(#292609),#88397); +#292609 = PRESENTATION_STYLE_ASSIGNMENT((#292610)); +#292610 = SURFACE_STYLE_USAGE(.BOTH.,#292611); +#292611 = SURFACE_SIDE_STYLE('',(#292612)); +#292612 = SURFACE_STYLE_FILL_AREA(#292613); +#292613 = FILL_AREA_STYLE('',(#292614)); +#292614 = FILL_AREA_STYLE_COLOUR('',#282540); +#292615 = STYLED_ITEM('color',(#292616),#88421); +#292616 = PRESENTATION_STYLE_ASSIGNMENT((#292617)); +#292617 = SURFACE_STYLE_USAGE(.BOTH.,#292618); +#292618 = SURFACE_SIDE_STYLE('',(#292619)); +#292619 = SURFACE_STYLE_FILL_AREA(#292620); +#292620 = FILL_AREA_STYLE('',(#292621)); +#292621 = FILL_AREA_STYLE_COLOUR('',#282540); +#292622 = STYLED_ITEM('color',(#292623),#88445); +#292623 = PRESENTATION_STYLE_ASSIGNMENT((#292624)); +#292624 = SURFACE_STYLE_USAGE(.BOTH.,#292625); +#292625 = SURFACE_SIDE_STYLE('',(#292626)); +#292626 = SURFACE_STYLE_FILL_AREA(#292627); +#292627 = FILL_AREA_STYLE('',(#292628)); +#292628 = FILL_AREA_STYLE_COLOUR('',#282540); +#292629 = STYLED_ITEM('color',(#292630),#88462); +#292630 = PRESENTATION_STYLE_ASSIGNMENT((#292631)); +#292631 = SURFACE_STYLE_USAGE(.BOTH.,#292632); +#292632 = SURFACE_SIDE_STYLE('',(#292633)); +#292633 = SURFACE_STYLE_FILL_AREA(#292634); +#292634 = FILL_AREA_STYLE('',(#292635)); +#292635 = FILL_AREA_STYLE_COLOUR('',#282540); +#292636 = STYLED_ITEM('color',(#292637),#88493); +#292637 = PRESENTATION_STYLE_ASSIGNMENT((#292638)); +#292638 = SURFACE_STYLE_USAGE(.BOTH.,#292639); +#292639 = SURFACE_SIDE_STYLE('',(#292640)); +#292640 = SURFACE_STYLE_FILL_AREA(#292641); +#292641 = FILL_AREA_STYLE('',(#292642)); +#292642 = FILL_AREA_STYLE_COLOUR('',#282540); +#292643 = STYLED_ITEM('color',(#292644),#88517); +#292644 = PRESENTATION_STYLE_ASSIGNMENT((#292645)); +#292645 = SURFACE_STYLE_USAGE(.BOTH.,#292646); +#292646 = SURFACE_SIDE_STYLE('',(#292647)); +#292647 = SURFACE_STYLE_FILL_AREA(#292648); +#292648 = FILL_AREA_STYLE('',(#292649)); +#292649 = FILL_AREA_STYLE_COLOUR('',#282540); +#292650 = STYLED_ITEM('color',(#292651),#88541); +#292651 = PRESENTATION_STYLE_ASSIGNMENT((#292652)); +#292652 = SURFACE_STYLE_USAGE(.BOTH.,#292653); +#292653 = SURFACE_SIDE_STYLE('',(#292654)); +#292654 = SURFACE_STYLE_FILL_AREA(#292655); +#292655 = FILL_AREA_STYLE('',(#292656)); +#292656 = FILL_AREA_STYLE_COLOUR('',#282540); +#292657 = STYLED_ITEM('color',(#292658),#88558); +#292658 = PRESENTATION_STYLE_ASSIGNMENT((#292659)); +#292659 = SURFACE_STYLE_USAGE(.BOTH.,#292660); +#292660 = SURFACE_SIDE_STYLE('',(#292661)); +#292661 = SURFACE_STYLE_FILL_AREA(#292662); +#292662 = FILL_AREA_STYLE('',(#292663)); +#292663 = FILL_AREA_STYLE_COLOUR('',#282540); +#292664 = STYLED_ITEM('color',(#292665),#88589); +#292665 = PRESENTATION_STYLE_ASSIGNMENT((#292666)); +#292666 = SURFACE_STYLE_USAGE(.BOTH.,#292667); +#292667 = SURFACE_SIDE_STYLE('',(#292668)); +#292668 = SURFACE_STYLE_FILL_AREA(#292669); +#292669 = FILL_AREA_STYLE('',(#292670)); +#292670 = FILL_AREA_STYLE_COLOUR('',#282540); +#292671 = STYLED_ITEM('color',(#292672),#88613); +#292672 = PRESENTATION_STYLE_ASSIGNMENT((#292673)); +#292673 = SURFACE_STYLE_USAGE(.BOTH.,#292674); +#292674 = SURFACE_SIDE_STYLE('',(#292675)); +#292675 = SURFACE_STYLE_FILL_AREA(#292676); +#292676 = FILL_AREA_STYLE('',(#292677)); +#292677 = FILL_AREA_STYLE_COLOUR('',#282540); +#292678 = STYLED_ITEM('color',(#292679),#88637); +#292679 = PRESENTATION_STYLE_ASSIGNMENT((#292680)); +#292680 = SURFACE_STYLE_USAGE(.BOTH.,#292681); +#292681 = SURFACE_SIDE_STYLE('',(#292682)); +#292682 = SURFACE_STYLE_FILL_AREA(#292683); +#292683 = FILL_AREA_STYLE('',(#292684)); +#292684 = FILL_AREA_STYLE_COLOUR('',#282540); +#292685 = STYLED_ITEM('color',(#292686),#88654); +#292686 = PRESENTATION_STYLE_ASSIGNMENT((#292687)); +#292687 = SURFACE_STYLE_USAGE(.BOTH.,#292688); +#292688 = SURFACE_SIDE_STYLE('',(#292689)); +#292689 = SURFACE_STYLE_FILL_AREA(#292690); +#292690 = FILL_AREA_STYLE('',(#292691)); +#292691 = FILL_AREA_STYLE_COLOUR('',#282540); +#292692 = STYLED_ITEM('color',(#292693),#88685); +#292693 = PRESENTATION_STYLE_ASSIGNMENT((#292694)); +#292694 = SURFACE_STYLE_USAGE(.BOTH.,#292695); +#292695 = SURFACE_SIDE_STYLE('',(#292696)); +#292696 = SURFACE_STYLE_FILL_AREA(#292697); +#292697 = FILL_AREA_STYLE('',(#292698)); +#292698 = FILL_AREA_STYLE_COLOUR('',#282540); +#292699 = STYLED_ITEM('color',(#292700),#88709); +#292700 = PRESENTATION_STYLE_ASSIGNMENT((#292701)); +#292701 = SURFACE_STYLE_USAGE(.BOTH.,#292702); +#292702 = SURFACE_SIDE_STYLE('',(#292703)); +#292703 = SURFACE_STYLE_FILL_AREA(#292704); +#292704 = FILL_AREA_STYLE('',(#292705)); +#292705 = FILL_AREA_STYLE_COLOUR('',#282540); +#292706 = STYLED_ITEM('color',(#292707),#88733); +#292707 = PRESENTATION_STYLE_ASSIGNMENT((#292708)); +#292708 = SURFACE_STYLE_USAGE(.BOTH.,#292709); +#292709 = SURFACE_SIDE_STYLE('',(#292710)); +#292710 = SURFACE_STYLE_FILL_AREA(#292711); +#292711 = FILL_AREA_STYLE('',(#292712)); +#292712 = FILL_AREA_STYLE_COLOUR('',#282540); +#292713 = STYLED_ITEM('color',(#292714),#88750); +#292714 = PRESENTATION_STYLE_ASSIGNMENT((#292715)); +#292715 = SURFACE_STYLE_USAGE(.BOTH.,#292716); +#292716 = SURFACE_SIDE_STYLE('',(#292717)); +#292717 = SURFACE_STYLE_FILL_AREA(#292718); +#292718 = FILL_AREA_STYLE('',(#292719)); +#292719 = FILL_AREA_STYLE_COLOUR('',#279624); +#292720 = STYLED_ITEM('color',(#292721),#88774); +#292721 = PRESENTATION_STYLE_ASSIGNMENT((#292722)); +#292722 = SURFACE_STYLE_USAGE(.BOTH.,#292723); +#292723 = SURFACE_SIDE_STYLE('',(#292724)); +#292724 = SURFACE_STYLE_FILL_AREA(#292725); +#292725 = FILL_AREA_STYLE('',(#292726)); +#292726 = FILL_AREA_STYLE_COLOUR('',#279624); +#292727 = STYLED_ITEM('color',(#292728),#88791); +#292728 = PRESENTATION_STYLE_ASSIGNMENT((#292729)); +#292729 = SURFACE_STYLE_USAGE(.BOTH.,#292730); +#292730 = SURFACE_SIDE_STYLE('',(#292731)); +#292731 = SURFACE_STYLE_FILL_AREA(#292732); +#292732 = FILL_AREA_STYLE('',(#292733)); +#292733 = FILL_AREA_STYLE_COLOUR('',#279624); +#292734 = STYLED_ITEM('color',(#292735),#88808); +#292735 = PRESENTATION_STYLE_ASSIGNMENT((#292736)); +#292736 = SURFACE_STYLE_USAGE(.BOTH.,#292737); +#292737 = SURFACE_SIDE_STYLE('',(#292738)); +#292738 = SURFACE_STYLE_FILL_AREA(#292739); +#292739 = FILL_AREA_STYLE('',(#292740)); +#292740 = FILL_AREA_STYLE_COLOUR('',#279624); +#292741 = STYLED_ITEM('color',(#292742),#88821); +#292742 = PRESENTATION_STYLE_ASSIGNMENT((#292743)); +#292743 = SURFACE_STYLE_USAGE(.BOTH.,#292744); +#292744 = SURFACE_SIDE_STYLE('',(#292745)); +#292745 = SURFACE_STYLE_FILL_AREA(#292746); +#292746 = FILL_AREA_STYLE('',(#292747)); +#292747 = FILL_AREA_STYLE_COLOUR('',#279624); +#292748 = STYLED_ITEM('color',(#292749),#88833); +#292749 = PRESENTATION_STYLE_ASSIGNMENT((#292750)); +#292750 = SURFACE_STYLE_USAGE(.BOTH.,#292751); +#292751 = SURFACE_SIDE_STYLE('',(#292752)); +#292752 = SURFACE_STYLE_FILL_AREA(#292753); +#292753 = FILL_AREA_STYLE('',(#292754)); +#292754 = FILL_AREA_STYLE_COLOUR('',#279624); +#292755 = STYLED_ITEM('color',(#292756),#88843); +#292756 = PRESENTATION_STYLE_ASSIGNMENT((#292757)); +#292757 = SURFACE_STYLE_USAGE(.BOTH.,#292758); +#292758 = SURFACE_SIDE_STYLE('',(#292759)); +#292759 = SURFACE_STYLE_FILL_AREA(#292760); +#292760 = FILL_AREA_STYLE('',(#292761)); +#292761 = FILL_AREA_STYLE_COLOUR('',#279624); +#292762 = STYLED_ITEM('color',(#292763),#88853); +#292763 = PRESENTATION_STYLE_ASSIGNMENT((#292764)); +#292764 = SURFACE_STYLE_USAGE(.BOTH.,#292765); +#292765 = SURFACE_SIDE_STYLE('',(#292766)); +#292766 = SURFACE_STYLE_FILL_AREA(#292767); +#292767 = FILL_AREA_STYLE('',(#292768)); +#292768 = FILL_AREA_STYLE_COLOUR('',#279624); +#292769 = STYLED_ITEM('color',(#292770),#88863); +#292770 = PRESENTATION_STYLE_ASSIGNMENT((#292771)); +#292771 = SURFACE_STYLE_USAGE(.BOTH.,#292772); +#292772 = SURFACE_SIDE_STYLE('',(#292773)); +#292773 = SURFACE_STYLE_FILL_AREA(#292774); +#292774 = FILL_AREA_STYLE('',(#292775)); +#292775 = FILL_AREA_STYLE_COLOUR('',#279624); +#292776 = STYLED_ITEM('color',(#292777),#88873); +#292777 = PRESENTATION_STYLE_ASSIGNMENT((#292778)); +#292778 = SURFACE_STYLE_USAGE(.BOTH.,#292779); +#292779 = SURFACE_SIDE_STYLE('',(#292780)); +#292780 = SURFACE_STYLE_FILL_AREA(#292781); +#292781 = FILL_AREA_STYLE('',(#292782)); +#292782 = FILL_AREA_STYLE_COLOUR('',#282540); +#292783 = STYLED_ITEM('color',(#292784),#88885); +#292784 = PRESENTATION_STYLE_ASSIGNMENT((#292785)); +#292785 = SURFACE_STYLE_USAGE(.BOTH.,#292786); +#292786 = SURFACE_SIDE_STYLE('',(#292787)); +#292787 = SURFACE_STYLE_FILL_AREA(#292788); +#292788 = FILL_AREA_STYLE('',(#292789)); +#292789 = FILL_AREA_STYLE_COLOUR('',#282540); +#292790 = STYLED_ITEM('color',(#292791),#88897); +#292791 = PRESENTATION_STYLE_ASSIGNMENT((#292792)); +#292792 = SURFACE_STYLE_USAGE(.BOTH.,#292793); +#292793 = SURFACE_SIDE_STYLE('',(#292794)); +#292794 = SURFACE_STYLE_FILL_AREA(#292795); +#292795 = FILL_AREA_STYLE('',(#292796)); +#292796 = FILL_AREA_STYLE_COLOUR('',#282540); +#292797 = STYLED_ITEM('color',(#292798),#88909); +#292798 = PRESENTATION_STYLE_ASSIGNMENT((#292799)); +#292799 = SURFACE_STYLE_USAGE(.BOTH.,#292800); +#292800 = SURFACE_SIDE_STYLE('',(#292801)); +#292801 = SURFACE_STYLE_FILL_AREA(#292802); +#292802 = FILL_AREA_STYLE('',(#292803)); +#292803 = FILL_AREA_STYLE_COLOUR('',#282540); +#292804 = STYLED_ITEM('color',(#292805),#88921); +#292805 = PRESENTATION_STYLE_ASSIGNMENT((#292806)); +#292806 = SURFACE_STYLE_USAGE(.BOTH.,#292807); +#292807 = SURFACE_SIDE_STYLE('',(#292808)); +#292808 = SURFACE_STYLE_FILL_AREA(#292809); +#292809 = FILL_AREA_STYLE('',(#292810)); +#292810 = FILL_AREA_STYLE_COLOUR('',#282540); +#292811 = STYLED_ITEM('color',(#292812),#88933); +#292812 = PRESENTATION_STYLE_ASSIGNMENT((#292813)); +#292813 = SURFACE_STYLE_USAGE(.BOTH.,#292814); +#292814 = SURFACE_SIDE_STYLE('',(#292815)); +#292815 = SURFACE_STYLE_FILL_AREA(#292816); +#292816 = FILL_AREA_STYLE('',(#292817)); +#292817 = FILL_AREA_STYLE_COLOUR('',#282540); +#292818 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #292819,#292827,#292834,#292841,#292848,#292855,#292862,#292869, + #292876,#292883,#292890,#292897,#292904,#292911,#292918,#292925, + #292932,#292939,#292946,#292953,#292960,#292967,#292974,#292981, + #292988,#292995,#293002,#293009,#293016,#293023,#293030,#293037, + #293044,#293051,#293058,#293065,#293073,#293080,#293087,#293094, + #293101,#293108,#293115,#293122,#293129,#293136,#293143,#293150, + #293157,#293164),#11967); +#292819 = STYLED_ITEM('color',(#292820),#10446); +#292820 = PRESENTATION_STYLE_ASSIGNMENT((#292821)); +#292821 = SURFACE_STYLE_USAGE(.BOTH.,#292822); +#292822 = SURFACE_SIDE_STYLE('',(#292823)); +#292823 = SURFACE_STYLE_FILL_AREA(#292824); +#292824 = FILL_AREA_STYLE('',(#292825)); +#292825 = FILL_AREA_STYLE_COLOUR('',#292826); +#292826 = COLOUR_RGB('',0.894999966383,0.890999961016,0.813000030345); +#292827 = STYLED_ITEM('color',(#292828),#10486); +#292828 = PRESENTATION_STYLE_ASSIGNMENT((#292829)); +#292829 = SURFACE_STYLE_USAGE(.BOTH.,#292830); +#292830 = SURFACE_SIDE_STYLE('',(#292831)); +#292831 = SURFACE_STYLE_FILL_AREA(#292832); +#292832 = FILL_AREA_STYLE('',(#292833)); +#292833 = FILL_AREA_STYLE_COLOUR('',#292826); +#292834 = STYLED_ITEM('color',(#292835),#10533); +#292835 = PRESENTATION_STYLE_ASSIGNMENT((#292836)); +#292836 = SURFACE_STYLE_USAGE(.BOTH.,#292837); +#292837 = SURFACE_SIDE_STYLE('',(#292838)); +#292838 = SURFACE_STYLE_FILL_AREA(#292839); +#292839 = FILL_AREA_STYLE('',(#292840)); +#292840 = FILL_AREA_STYLE_COLOUR('',#292826); +#292841 = STYLED_ITEM('color',(#292842),#10612); +#292842 = PRESENTATION_STYLE_ASSIGNMENT((#292843)); +#292843 = SURFACE_STYLE_USAGE(.BOTH.,#292844); +#292844 = SURFACE_SIDE_STYLE('',(#292845)); +#292845 = SURFACE_STYLE_FILL_AREA(#292846); +#292846 = FILL_AREA_STYLE('',(#292847)); +#292847 = FILL_AREA_STYLE_COLOUR('',#292826); +#292848 = STYLED_ITEM('color',(#292849),#10636); +#292849 = PRESENTATION_STYLE_ASSIGNMENT((#292850)); +#292850 = SURFACE_STYLE_USAGE(.BOTH.,#292851); +#292851 = SURFACE_SIDE_STYLE('',(#292852)); +#292852 = SURFACE_STYLE_FILL_AREA(#292853); +#292853 = FILL_AREA_STYLE('',(#292854)); +#292854 = FILL_AREA_STYLE_COLOUR('',#292826); +#292855 = STYLED_ITEM('color',(#292856),#10676); +#292856 = PRESENTATION_STYLE_ASSIGNMENT((#292857)); +#292857 = SURFACE_STYLE_USAGE(.BOTH.,#292858); +#292858 = SURFACE_SIDE_STYLE('',(#292859)); +#292859 = SURFACE_STYLE_FILL_AREA(#292860); +#292860 = FILL_AREA_STYLE('',(#292861)); +#292861 = FILL_AREA_STYLE_COLOUR('',#292826); +#292862 = STYLED_ITEM('color',(#292863),#10707); +#292863 = PRESENTATION_STYLE_ASSIGNMENT((#292864)); +#292864 = SURFACE_STYLE_USAGE(.BOTH.,#292865); +#292865 = SURFACE_SIDE_STYLE('',(#292866)); +#292866 = SURFACE_STYLE_FILL_AREA(#292867); +#292867 = FILL_AREA_STYLE('',(#292868)); +#292868 = FILL_AREA_STYLE_COLOUR('',#292826); +#292869 = STYLED_ITEM('color',(#292870),#10724); +#292870 = PRESENTATION_STYLE_ASSIGNMENT((#292871)); +#292871 = SURFACE_STYLE_USAGE(.BOTH.,#292872); +#292872 = SURFACE_SIDE_STYLE('',(#292873)); +#292873 = SURFACE_STYLE_FILL_AREA(#292874); +#292874 = FILL_AREA_STYLE('',(#292875)); +#292875 = FILL_AREA_STYLE_COLOUR('',#280691); +#292876 = STYLED_ITEM('color',(#292877),#10757); +#292877 = PRESENTATION_STYLE_ASSIGNMENT((#292878)); +#292878 = SURFACE_STYLE_USAGE(.BOTH.,#292879); +#292879 = SURFACE_SIDE_STYLE('',(#292880)); +#292880 = SURFACE_STYLE_FILL_AREA(#292881); +#292881 = FILL_AREA_STYLE('',(#292882)); +#292882 = FILL_AREA_STYLE_COLOUR('',#292826); +#292883 = STYLED_ITEM('color',(#292884),#10781); +#292884 = PRESENTATION_STYLE_ASSIGNMENT((#292885)); +#292885 = SURFACE_STYLE_USAGE(.BOTH.,#292886); +#292886 = SURFACE_SIDE_STYLE('',(#292887)); +#292887 = SURFACE_STYLE_FILL_AREA(#292888); +#292888 = FILL_AREA_STYLE('',(#292889)); +#292889 = FILL_AREA_STYLE_COLOUR('',#280691); +#292890 = STYLED_ITEM('color',(#292891),#10848); +#292891 = PRESENTATION_STYLE_ASSIGNMENT((#292892)); +#292892 = SURFACE_STYLE_USAGE(.BOTH.,#292893); +#292893 = SURFACE_SIDE_STYLE('',(#292894)); +#292894 = SURFACE_STYLE_FILL_AREA(#292895); +#292895 = FILL_AREA_STYLE('',(#292896)); +#292896 = FILL_AREA_STYLE_COLOUR('',#292826); +#292897 = STYLED_ITEM('color',(#292898),#10969); +#292898 = PRESENTATION_STYLE_ASSIGNMENT((#292899)); +#292899 = SURFACE_STYLE_USAGE(.BOTH.,#292900); +#292900 = SURFACE_SIDE_STYLE('',(#292901)); +#292901 = SURFACE_STYLE_FILL_AREA(#292902); +#292902 = FILL_AREA_STYLE('',(#292903)); +#292903 = FILL_AREA_STYLE_COLOUR('',#280691); +#292904 = STYLED_ITEM('color',(#292905),#11036); +#292905 = PRESENTATION_STYLE_ASSIGNMENT((#292906)); +#292906 = SURFACE_STYLE_USAGE(.BOTH.,#292907); +#292907 = SURFACE_SIDE_STYLE('',(#292908)); +#292908 = SURFACE_STYLE_FILL_AREA(#292909); +#292909 = FILL_AREA_STYLE('',(#292910)); +#292910 = FILL_AREA_STYLE_COLOUR('',#292826); +#292911 = STYLED_ITEM('color',(#292912),#11060); +#292912 = PRESENTATION_STYLE_ASSIGNMENT((#292913)); +#292913 = SURFACE_STYLE_USAGE(.BOTH.,#292914); +#292914 = SURFACE_SIDE_STYLE('',(#292915)); +#292915 = SURFACE_STYLE_FILL_AREA(#292916); +#292916 = FILL_AREA_STYLE('',(#292917)); +#292917 = FILL_AREA_STYLE_COLOUR('',#292826); +#292918 = STYLED_ITEM('color',(#292919),#11091); +#292919 = PRESENTATION_STYLE_ASSIGNMENT((#292920)); +#292920 = SURFACE_STYLE_USAGE(.BOTH.,#292921); +#292921 = SURFACE_SIDE_STYLE('',(#292922)); +#292922 = SURFACE_STYLE_FILL_AREA(#292923); +#292923 = FILL_AREA_STYLE('',(#292924)); +#292924 = FILL_AREA_STYLE_COLOUR('',#280691); +#292925 = STYLED_ITEM('color',(#292926),#11124); +#292926 = PRESENTATION_STYLE_ASSIGNMENT((#292927)); +#292927 = SURFACE_STYLE_USAGE(.BOTH.,#292928); +#292928 = SURFACE_SIDE_STYLE('',(#292929)); +#292929 = SURFACE_STYLE_FILL_AREA(#292930); +#292930 = FILL_AREA_STYLE('',(#292931)); +#292931 = FILL_AREA_STYLE_COLOUR('',#292826); +#292932 = STYLED_ITEM('color',(#292933),#11180); +#292933 = PRESENTATION_STYLE_ASSIGNMENT((#292934)); +#292934 = SURFACE_STYLE_USAGE(.BOTH.,#292935); +#292935 = SURFACE_SIDE_STYLE('',(#292936)); +#292936 = SURFACE_STYLE_FILL_AREA(#292937); +#292937 = FILL_AREA_STYLE('',(#292938)); +#292938 = FILL_AREA_STYLE_COLOUR('',#280691); +#292939 = STYLED_ITEM('color',(#292940),#11204); +#292940 = PRESENTATION_STYLE_ASSIGNMENT((#292941)); +#292941 = SURFACE_STYLE_USAGE(.BOTH.,#292942); +#292942 = SURFACE_SIDE_STYLE('',(#292943)); +#292943 = SURFACE_STYLE_FILL_AREA(#292944); +#292944 = FILL_AREA_STYLE('',(#292945)); +#292945 = FILL_AREA_STYLE_COLOUR('',#280691); +#292946 = STYLED_ITEM('color',(#292947),#11228); +#292947 = PRESENTATION_STYLE_ASSIGNMENT((#292948)); +#292948 = SURFACE_STYLE_USAGE(.BOTH.,#292949); +#292949 = SURFACE_SIDE_STYLE('',(#292950)); +#292950 = SURFACE_STYLE_FILL_AREA(#292951); +#292951 = FILL_AREA_STYLE('',(#292952)); +#292952 = FILL_AREA_STYLE_COLOUR('',#280691); +#292953 = STYLED_ITEM('color',(#292954),#11252); +#292954 = PRESENTATION_STYLE_ASSIGNMENT((#292955)); +#292955 = SURFACE_STYLE_USAGE(.BOTH.,#292956); +#292956 = SURFACE_SIDE_STYLE('',(#292957)); +#292957 = SURFACE_STYLE_FILL_AREA(#292958); +#292958 = FILL_AREA_STYLE('',(#292959)); +#292959 = FILL_AREA_STYLE_COLOUR('',#280691); +#292960 = STYLED_ITEM('color',(#292961),#11285); +#292961 = PRESENTATION_STYLE_ASSIGNMENT((#292962)); +#292962 = SURFACE_STYLE_USAGE(.BOTH.,#292963); +#292963 = SURFACE_SIDE_STYLE('',(#292964)); +#292964 = SURFACE_STYLE_FILL_AREA(#292965); +#292965 = FILL_AREA_STYLE('',(#292966)); +#292966 = FILL_AREA_STYLE_COLOUR('',#280691); +#292967 = STYLED_ITEM('color',(#292968),#11297); +#292968 = PRESENTATION_STYLE_ASSIGNMENT((#292969)); +#292969 = SURFACE_STYLE_USAGE(.BOTH.,#292970); +#292970 = SURFACE_SIDE_STYLE('',(#292971)); +#292971 = SURFACE_STYLE_FILL_AREA(#292972); +#292972 = FILL_AREA_STYLE('',(#292973)); +#292973 = FILL_AREA_STYLE_COLOUR('',#280691); +#292974 = STYLED_ITEM('color',(#292975),#11360); +#292975 = PRESENTATION_STYLE_ASSIGNMENT((#292976)); +#292976 = SURFACE_STYLE_USAGE(.BOTH.,#292977); +#292977 = SURFACE_SIDE_STYLE('',(#292978)); +#292978 = SURFACE_STYLE_FILL_AREA(#292979); +#292979 = FILL_AREA_STYLE('',(#292980)); +#292980 = FILL_AREA_STYLE_COLOUR('',#280691); +#292981 = STYLED_ITEM('color',(#292982),#11385); +#292982 = PRESENTATION_STYLE_ASSIGNMENT((#292983)); +#292983 = SURFACE_STYLE_USAGE(.BOTH.,#292984); +#292984 = SURFACE_SIDE_STYLE('',(#292985)); +#292985 = SURFACE_STYLE_FILL_AREA(#292986); +#292986 = FILL_AREA_STYLE('',(#292987)); +#292987 = FILL_AREA_STYLE_COLOUR('',#280691); +#292988 = STYLED_ITEM('color',(#292989),#11402); +#292989 = PRESENTATION_STYLE_ASSIGNMENT((#292990)); +#292990 = SURFACE_STYLE_USAGE(.BOTH.,#292991); +#292991 = SURFACE_SIDE_STYLE('',(#292992)); +#292992 = SURFACE_STYLE_FILL_AREA(#292993); +#292993 = FILL_AREA_STYLE('',(#292994)); +#292994 = FILL_AREA_STYLE_COLOUR('',#280691); +#292995 = STYLED_ITEM('color',(#292996),#11426); +#292996 = PRESENTATION_STYLE_ASSIGNMENT((#292997)); +#292997 = SURFACE_STYLE_USAGE(.BOTH.,#292998); +#292998 = SURFACE_SIDE_STYLE('',(#292999)); +#292999 = SURFACE_STYLE_FILL_AREA(#293000); +#293000 = FILL_AREA_STYLE('',(#293001)); +#293001 = FILL_AREA_STYLE_COLOUR('',#280691); +#293002 = STYLED_ITEM('color',(#293003),#11444); +#293003 = PRESENTATION_STYLE_ASSIGNMENT((#293004)); +#293004 = SURFACE_STYLE_USAGE(.BOTH.,#293005); +#293005 = SURFACE_SIDE_STYLE('',(#293006)); +#293006 = SURFACE_STYLE_FILL_AREA(#293007); +#293007 = FILL_AREA_STYLE('',(#293008)); +#293008 = FILL_AREA_STYLE_COLOUR('',#280691); +#293009 = STYLED_ITEM('color',(#293010),#11462); +#293010 = PRESENTATION_STYLE_ASSIGNMENT((#293011)); +#293011 = SURFACE_STYLE_USAGE(.BOTH.,#293012); +#293012 = SURFACE_SIDE_STYLE('',(#293013)); +#293013 = SURFACE_STYLE_FILL_AREA(#293014); +#293014 = FILL_AREA_STYLE('',(#293015)); +#293015 = FILL_AREA_STYLE_COLOUR('',#280691); +#293016 = STYLED_ITEM('color',(#293017),#11480); +#293017 = PRESENTATION_STYLE_ASSIGNMENT((#293018)); +#293018 = SURFACE_STYLE_USAGE(.BOTH.,#293019); +#293019 = SURFACE_SIDE_STYLE('',(#293020)); +#293020 = SURFACE_STYLE_FILL_AREA(#293021); +#293021 = FILL_AREA_STYLE('',(#293022)); +#293022 = FILL_AREA_STYLE_COLOUR('',#280691); +#293023 = STYLED_ITEM('color',(#293024),#11497); +#293024 = PRESENTATION_STYLE_ASSIGNMENT((#293025)); +#293025 = SURFACE_STYLE_USAGE(.BOTH.,#293026); +#293026 = SURFACE_SIDE_STYLE('',(#293027)); +#293027 = SURFACE_STYLE_FILL_AREA(#293028); +#293028 = FILL_AREA_STYLE('',(#293029)); +#293029 = FILL_AREA_STYLE_COLOUR('',#280691); +#293030 = STYLED_ITEM('color',(#293031),#11514); +#293031 = PRESENTATION_STYLE_ASSIGNMENT((#293032)); +#293032 = SURFACE_STYLE_USAGE(.BOTH.,#293033); +#293033 = SURFACE_SIDE_STYLE('',(#293034)); +#293034 = SURFACE_STYLE_FILL_AREA(#293035); +#293035 = FILL_AREA_STYLE('',(#293036)); +#293036 = FILL_AREA_STYLE_COLOUR('',#280691); +#293037 = STYLED_ITEM('color',(#293038),#11545); +#293038 = PRESENTATION_STYLE_ASSIGNMENT((#293039)); +#293039 = SURFACE_STYLE_USAGE(.BOTH.,#293040); +#293040 = SURFACE_SIDE_STYLE('',(#293041)); +#293041 = SURFACE_STYLE_FILL_AREA(#293042); +#293042 = FILL_AREA_STYLE('',(#293043)); +#293043 = FILL_AREA_STYLE_COLOUR('',#280691); +#293044 = STYLED_ITEM('color',(#293045),#11570); +#293045 = PRESENTATION_STYLE_ASSIGNMENT((#293046)); +#293046 = SURFACE_STYLE_USAGE(.BOTH.,#293047); +#293047 = SURFACE_SIDE_STYLE('',(#293048)); +#293048 = SURFACE_STYLE_FILL_AREA(#293049); +#293049 = FILL_AREA_STYLE('',(#293050)); +#293050 = FILL_AREA_STYLE_COLOUR('',#280691); +#293051 = STYLED_ITEM('color',(#293052),#11595); +#293052 = PRESENTATION_STYLE_ASSIGNMENT((#293053)); +#293053 = SURFACE_STYLE_USAGE(.BOTH.,#293054); +#293054 = SURFACE_SIDE_STYLE('',(#293055)); +#293055 = SURFACE_STYLE_FILL_AREA(#293056); +#293056 = FILL_AREA_STYLE('',(#293057)); +#293057 = FILL_AREA_STYLE_COLOUR('',#280691); +#293058 = STYLED_ITEM('color',(#293059),#11619); +#293059 = PRESENTATION_STYLE_ASSIGNMENT((#293060)); +#293060 = SURFACE_STYLE_USAGE(.BOTH.,#293061); +#293061 = SURFACE_SIDE_STYLE('',(#293062)); +#293062 = SURFACE_STYLE_FILL_AREA(#293063); +#293063 = FILL_AREA_STYLE('',(#293064)); +#293064 = FILL_AREA_STYLE_COLOUR('',#280691); +#293065 = STYLED_ITEM('color',(#293066),#11636); +#293066 = PRESENTATION_STYLE_ASSIGNMENT((#293067)); +#293067 = SURFACE_STYLE_USAGE(.BOTH.,#293068); +#293068 = SURFACE_SIDE_STYLE('',(#293069)); +#293069 = SURFACE_STYLE_FILL_AREA(#293070); +#293070 = FILL_AREA_STYLE('',(#293071)); +#293071 = FILL_AREA_STYLE_COLOUR('',#293072); +#293072 = COLOUR_RGB('',0.340000006699,0.68000001254,0.444999988852); +#293073 = STYLED_ITEM('color',(#293074),#11667); +#293074 = PRESENTATION_STYLE_ASSIGNMENT((#293075)); +#293075 = SURFACE_STYLE_USAGE(.BOTH.,#293076); +#293076 = SURFACE_SIDE_STYLE('',(#293077)); +#293077 = SURFACE_STYLE_FILL_AREA(#293078); +#293078 = FILL_AREA_STYLE('',(#293079)); +#293079 = FILL_AREA_STYLE_COLOUR('',#293072); +#293080 = STYLED_ITEM('color',(#293081),#11691); +#293081 = PRESENTATION_STYLE_ASSIGNMENT((#293082)); +#293082 = SURFACE_STYLE_USAGE(.BOTH.,#293083); +#293083 = SURFACE_SIDE_STYLE('',(#293084)); +#293084 = SURFACE_STYLE_FILL_AREA(#293085); +#293085 = FILL_AREA_STYLE('',(#293086)); +#293086 = FILL_AREA_STYLE_COLOUR('',#293072); +#293087 = STYLED_ITEM('color',(#293088),#11708); +#293088 = PRESENTATION_STYLE_ASSIGNMENT((#293089)); +#293089 = SURFACE_STYLE_USAGE(.BOTH.,#293090); +#293090 = SURFACE_SIDE_STYLE('',(#293091)); +#293091 = SURFACE_STYLE_FILL_AREA(#293092); +#293092 = FILL_AREA_STYLE('',(#293093)); +#293093 = FILL_AREA_STYLE_COLOUR('',#280691); +#293094 = STYLED_ITEM('color',(#293095),#11736); +#293095 = PRESENTATION_STYLE_ASSIGNMENT((#293096)); +#293096 = SURFACE_STYLE_USAGE(.BOTH.,#293097); +#293097 = SURFACE_SIDE_STYLE('',(#293098)); +#293098 = SURFACE_STYLE_FILL_AREA(#293099); +#293099 = FILL_AREA_STYLE('',(#293100)); +#293100 = FILL_AREA_STYLE_COLOUR('',#280691); +#293101 = STYLED_ITEM('color',(#293102),#11761); +#293102 = PRESENTATION_STYLE_ASSIGNMENT((#293103)); +#293103 = SURFACE_STYLE_USAGE(.BOTH.,#293104); +#293104 = SURFACE_SIDE_STYLE('',(#293105)); +#293105 = SURFACE_STYLE_FILL_AREA(#293106); +#293106 = FILL_AREA_STYLE('',(#293107)); +#293107 = FILL_AREA_STYLE_COLOUR('',#280691); +#293108 = STYLED_ITEM('color',(#293109),#11785); +#293109 = PRESENTATION_STYLE_ASSIGNMENT((#293110)); +#293110 = SURFACE_STYLE_USAGE(.BOTH.,#293111); +#293111 = SURFACE_SIDE_STYLE('',(#293112)); +#293112 = SURFACE_STYLE_FILL_AREA(#293113); +#293113 = FILL_AREA_STYLE('',(#293114)); +#293114 = FILL_AREA_STYLE_COLOUR('',#280691); +#293115 = STYLED_ITEM('color',(#293116),#11810); +#293116 = PRESENTATION_STYLE_ASSIGNMENT((#293117)); +#293117 = SURFACE_STYLE_USAGE(.BOTH.,#293118); +#293118 = SURFACE_SIDE_STYLE('',(#293119)); +#293119 = SURFACE_STYLE_FILL_AREA(#293120); +#293120 = FILL_AREA_STYLE('',(#293121)); +#293121 = FILL_AREA_STYLE_COLOUR('',#280691); +#293122 = STYLED_ITEM('color',(#293123),#11857); +#293123 = PRESENTATION_STYLE_ASSIGNMENT((#293124)); +#293124 = SURFACE_STYLE_USAGE(.BOTH.,#293125); +#293125 = SURFACE_SIDE_STYLE('',(#293126)); +#293126 = SURFACE_STYLE_FILL_AREA(#293127); +#293127 = FILL_AREA_STYLE('',(#293128)); +#293128 = FILL_AREA_STYLE_COLOUR('',#280691); +#293129 = STYLED_ITEM('color',(#293130),#11874); +#293130 = PRESENTATION_STYLE_ASSIGNMENT((#293131)); +#293131 = SURFACE_STYLE_USAGE(.BOTH.,#293132); +#293132 = SURFACE_SIDE_STYLE('',(#293133)); +#293133 = SURFACE_STYLE_FILL_AREA(#293134); +#293134 = FILL_AREA_STYLE('',(#293135)); +#293135 = FILL_AREA_STYLE_COLOUR('',#280691); +#293136 = STYLED_ITEM('color',(#293137),#11886); +#293137 = PRESENTATION_STYLE_ASSIGNMENT((#293138)); +#293138 = SURFACE_STYLE_USAGE(.BOTH.,#293139); +#293139 = SURFACE_SIDE_STYLE('',(#293140)); +#293140 = SURFACE_STYLE_FILL_AREA(#293141); +#293141 = FILL_AREA_STYLE('',(#293142)); +#293142 = FILL_AREA_STYLE_COLOUR('',#280691); +#293143 = STYLED_ITEM('color',(#293144),#11908); +#293144 = PRESENTATION_STYLE_ASSIGNMENT((#293145)); +#293145 = SURFACE_STYLE_USAGE(.BOTH.,#293146); +#293146 = SURFACE_SIDE_STYLE('',(#293147)); +#293147 = SURFACE_STYLE_FILL_AREA(#293148); +#293148 = FILL_AREA_STYLE('',(#293149)); +#293149 = FILL_AREA_STYLE_COLOUR('',#280691); +#293150 = STYLED_ITEM('color',(#293151),#11920); +#293151 = PRESENTATION_STYLE_ASSIGNMENT((#293152)); +#293152 = SURFACE_STYLE_USAGE(.BOTH.,#293153); +#293153 = SURFACE_SIDE_STYLE('',(#293154)); +#293154 = SURFACE_STYLE_FILL_AREA(#293155); +#293155 = FILL_AREA_STYLE('',(#293156)); +#293156 = FILL_AREA_STYLE_COLOUR('',#280691); +#293157 = STYLED_ITEM('color',(#293158),#11938); +#293158 = PRESENTATION_STYLE_ASSIGNMENT((#293159)); +#293159 = SURFACE_STYLE_USAGE(.BOTH.,#293160); +#293160 = SURFACE_SIDE_STYLE('',(#293161)); +#293161 = SURFACE_STYLE_FILL_AREA(#293162); +#293162 = FILL_AREA_STYLE('',(#293163)); +#293163 = FILL_AREA_STYLE_COLOUR('',#280691); +#293164 = STYLED_ITEM('color',(#293165),#11956); +#293165 = PRESENTATION_STYLE_ASSIGNMENT((#293166)); +#293166 = SURFACE_STYLE_USAGE(.BOTH.,#293167); +#293167 = SURFACE_SIDE_STYLE('',(#293168)); +#293168 = SURFACE_STYLE_FILL_AREA(#293169); +#293169 = FILL_AREA_STYLE('',(#293170)); +#293170 = FILL_AREA_STYLE_COLOUR('',#293072); +#293171 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #293172,#293179,#293186,#293193,#293200,#293207,#293214,#293221, + #293228,#293235,#293242,#293249,#293256,#293263,#293270,#293277, + #293284,#293291,#293298,#293305,#293312,#293319,#293326,#293333, + #293340,#293347,#293354,#293361,#293368,#293375,#293382,#293389, + #293396,#293403,#293410,#293417,#293424,#293431,#293438,#293445, + #293452,#293459,#293466,#293473,#293480,#293487,#293494,#293501, + #293508,#293515,#293522,#293529,#293536,#293543,#293550,#293557, + #293564,#293571,#293578,#293585,#293592,#293599,#293606,#293613, + #293620,#293627,#293634,#293641,#293648,#293655,#293662,#293669, + #293676,#293683,#293690,#293697,#293704,#293711,#293718,#293725, + #293732,#293739,#293746,#293753,#293760,#293767,#293774,#293781, + #293788,#293795,#293802,#293809,#293816,#293823,#293830,#293837, + #293844,#293851,#293858,#293865,#293872,#293879,#293886,#293893, + #293900,#293907,#293914,#293921,#293928,#293935,#293942,#293949, + #293956,#293963,#293970,#293977,#293984,#293991,#293998,#294005, + #294012,#294019,#294026,#294033,#294040,#294047,#294054,#294061, + #294068,#294075,#294082,#294089,#294096,#294103,#294110,#294117, + #294124,#294131,#294138,#294145,#294152,#294159,#294166,#294173, + #294180,#294187,#294194,#294201,#294208,#294215,#294222,#294229, + #294236,#294243,#294250,#294257,#294264,#294271),#95594); +#293172 = STYLED_ITEM('color',(#293173),#90426); +#293173 = PRESENTATION_STYLE_ASSIGNMENT((#293174)); +#293174 = SURFACE_STYLE_USAGE(.BOTH.,#293175); +#293175 = SURFACE_SIDE_STYLE('',(#293176)); +#293176 = SURFACE_STYLE_FILL_AREA(#293177); +#293177 = FILL_AREA_STYLE('',(#293178)); +#293178 = FILL_AREA_STYLE_COLOUR('',#282540); +#293179 = STYLED_ITEM('color',(#293180),#90467); +#293180 = PRESENTATION_STYLE_ASSIGNMENT((#293181)); +#293181 = SURFACE_STYLE_USAGE(.BOTH.,#293182); +#293182 = SURFACE_SIDE_STYLE('',(#293183)); +#293183 = SURFACE_STYLE_FILL_AREA(#293184); +#293184 = FILL_AREA_STYLE('',(#293185)); +#293185 = FILL_AREA_STYLE_COLOUR('',#282540); +#293186 = STYLED_ITEM('color',(#293187),#90514); +#293187 = PRESENTATION_STYLE_ASSIGNMENT((#293188)); +#293188 = SURFACE_STYLE_USAGE(.BOTH.,#293189); +#293189 = SURFACE_SIDE_STYLE('',(#293190)); +#293190 = SURFACE_STYLE_FILL_AREA(#293191); +#293191 = FILL_AREA_STYLE('',(#293192)); +#293192 = FILL_AREA_STYLE_COLOUR('',#282540); +#293193 = STYLED_ITEM('color',(#293194),#90539); +#293194 = PRESENTATION_STYLE_ASSIGNMENT((#293195)); +#293195 = SURFACE_STYLE_USAGE(.BOTH.,#293196); +#293196 = SURFACE_SIDE_STYLE('',(#293197)); +#293197 = SURFACE_STYLE_FILL_AREA(#293198); +#293198 = FILL_AREA_STYLE('',(#293199)); +#293199 = FILL_AREA_STYLE_COLOUR('',#282540); +#293200 = STYLED_ITEM('color',(#293201),#90579); +#293201 = PRESENTATION_STYLE_ASSIGNMENT((#293202)); +#293202 = SURFACE_STYLE_USAGE(.BOTH.,#293203); +#293203 = SURFACE_SIDE_STYLE('',(#293204)); +#293204 = SURFACE_STYLE_FILL_AREA(#293205); +#293205 = FILL_AREA_STYLE('',(#293206)); +#293206 = FILL_AREA_STYLE_COLOUR('',#282540); +#293207 = STYLED_ITEM('color',(#293208),#90596); +#293208 = PRESENTATION_STYLE_ASSIGNMENT((#293209)); +#293209 = SURFACE_STYLE_USAGE(.BOTH.,#293210); +#293210 = SURFACE_SIDE_STYLE('',(#293211)); +#293211 = SURFACE_STYLE_FILL_AREA(#293212); +#293212 = FILL_AREA_STYLE('',(#293213)); +#293213 = FILL_AREA_STYLE_COLOUR('',#279624); +#293214 = STYLED_ITEM('color',(#293215),#91446); +#293215 = PRESENTATION_STYLE_ASSIGNMENT((#293216)); +#293216 = SURFACE_STYLE_USAGE(.BOTH.,#293217); +#293217 = SURFACE_SIDE_STYLE('',(#293218)); +#293218 = SURFACE_STYLE_FILL_AREA(#293219); +#293219 = FILL_AREA_STYLE('',(#293220)); +#293220 = FILL_AREA_STYLE_COLOUR('',#279624); +#293221 = STYLED_ITEM('color',(#293222),#91578); +#293222 = PRESENTATION_STYLE_ASSIGNMENT((#293223)); +#293223 = SURFACE_STYLE_USAGE(.BOTH.,#293224); +#293224 = SURFACE_SIDE_STYLE('',(#293225)); +#293225 = SURFACE_STYLE_FILL_AREA(#293226); +#293226 = FILL_AREA_STYLE('',(#293227)); +#293227 = FILL_AREA_STYLE_COLOUR('',#282540); +#293228 = STYLED_ITEM('color',(#293229),#91590); +#293229 = PRESENTATION_STYLE_ASSIGNMENT((#293230)); +#293230 = SURFACE_STYLE_USAGE(.BOTH.,#293231); +#293231 = SURFACE_SIDE_STYLE('',(#293232)); +#293232 = SURFACE_STYLE_FILL_AREA(#293233); +#293233 = FILL_AREA_STYLE('',(#293234)); +#293234 = FILL_AREA_STYLE_COLOUR('',#279624); +#293235 = STYLED_ITEM('color',(#293236),#91775); +#293236 = PRESENTATION_STYLE_ASSIGNMENT((#293237)); +#293237 = SURFACE_STYLE_USAGE(.BOTH.,#293238); +#293238 = SURFACE_SIDE_STYLE('',(#293239)); +#293239 = SURFACE_STYLE_FILL_AREA(#293240); +#293240 = FILL_AREA_STYLE('',(#293241)); +#293241 = FILL_AREA_STYLE_COLOUR('',#282540); +#293242 = STYLED_ITEM('color',(#293243),#91815); +#293243 = PRESENTATION_STYLE_ASSIGNMENT((#293244)); +#293244 = SURFACE_STYLE_USAGE(.BOTH.,#293245); +#293245 = SURFACE_SIDE_STYLE('',(#293246)); +#293246 = SURFACE_STYLE_FILL_AREA(#293247); +#293247 = FILL_AREA_STYLE('',(#293248)); +#293248 = FILL_AREA_STYLE_COLOUR('',#282540); +#293249 = STYLED_ITEM('color',(#293250),#91840); +#293250 = PRESENTATION_STYLE_ASSIGNMENT((#293251)); +#293251 = SURFACE_STYLE_USAGE(.BOTH.,#293252); +#293252 = SURFACE_SIDE_STYLE('',(#293253)); +#293253 = SURFACE_STYLE_FILL_AREA(#293254); +#293254 = FILL_AREA_STYLE('',(#293255)); +#293255 = FILL_AREA_STYLE_COLOUR('',#282540); +#293256 = STYLED_ITEM('color',(#293257),#91873); +#293257 = PRESENTATION_STYLE_ASSIGNMENT((#293258)); +#293258 = SURFACE_STYLE_USAGE(.BOTH.,#293259); +#293259 = SURFACE_SIDE_STYLE('',(#293260)); +#293260 = SURFACE_STYLE_FILL_AREA(#293261); +#293261 = FILL_AREA_STYLE('',(#293262)); +#293262 = FILL_AREA_STYLE_COLOUR('',#282540); +#293263 = STYLED_ITEM('color',(#293264),#91913); +#293264 = PRESENTATION_STYLE_ASSIGNMENT((#293265)); +#293265 = SURFACE_STYLE_USAGE(.BOTH.,#293266); +#293266 = SURFACE_SIDE_STYLE('',(#293267)); +#293267 = SURFACE_STYLE_FILL_AREA(#293268); +#293268 = FILL_AREA_STYLE('',(#293269)); +#293269 = FILL_AREA_STYLE_COLOUR('',#282540); +#293270 = STYLED_ITEM('color',(#293271),#91953); +#293271 = PRESENTATION_STYLE_ASSIGNMENT((#293272)); +#293272 = SURFACE_STYLE_USAGE(.BOTH.,#293273); +#293273 = SURFACE_SIDE_STYLE('',(#293274)); +#293274 = SURFACE_STYLE_FILL_AREA(#293275); +#293275 = FILL_AREA_STYLE('',(#293276)); +#293276 = FILL_AREA_STYLE_COLOUR('',#282540); +#293277 = STYLED_ITEM('color',(#293278),#91978); +#293278 = PRESENTATION_STYLE_ASSIGNMENT((#293279)); +#293279 = SURFACE_STYLE_USAGE(.BOTH.,#293280); +#293280 = SURFACE_SIDE_STYLE('',(#293281)); +#293281 = SURFACE_STYLE_FILL_AREA(#293282); +#293282 = FILL_AREA_STYLE('',(#293283)); +#293283 = FILL_AREA_STYLE_COLOUR('',#282540); +#293284 = STYLED_ITEM('color',(#293285),#92003); +#293285 = PRESENTATION_STYLE_ASSIGNMENT((#293286)); +#293286 = SURFACE_STYLE_USAGE(.BOTH.,#293287); +#293287 = SURFACE_SIDE_STYLE('',(#293288)); +#293288 = SURFACE_STYLE_FILL_AREA(#293289); +#293289 = FILL_AREA_STYLE('',(#293290)); +#293290 = FILL_AREA_STYLE_COLOUR('',#282540); +#293291 = STYLED_ITEM('color',(#293292),#92036); +#293292 = PRESENTATION_STYLE_ASSIGNMENT((#293293)); +#293293 = SURFACE_STYLE_USAGE(.BOTH.,#293294); +#293294 = SURFACE_SIDE_STYLE('',(#293295)); +#293295 = SURFACE_STYLE_FILL_AREA(#293296); +#293296 = FILL_AREA_STYLE('',(#293297)); +#293297 = FILL_AREA_STYLE_COLOUR('',#282540); +#293298 = STYLED_ITEM('color',(#293299),#92069); +#293299 = PRESENTATION_STYLE_ASSIGNMENT((#293300)); +#293300 = SURFACE_STYLE_USAGE(.BOTH.,#293301); +#293301 = SURFACE_SIDE_STYLE('',(#293302)); +#293302 = SURFACE_STYLE_FILL_AREA(#293303); +#293303 = FILL_AREA_STYLE('',(#293304)); +#293304 = FILL_AREA_STYLE_COLOUR('',#282540); +#293305 = STYLED_ITEM('color',(#293306),#92109); +#293306 = PRESENTATION_STYLE_ASSIGNMENT((#293307)); +#293307 = SURFACE_STYLE_USAGE(.BOTH.,#293308); +#293308 = SURFACE_SIDE_STYLE('',(#293309)); +#293309 = SURFACE_STYLE_FILL_AREA(#293310); +#293310 = FILL_AREA_STYLE('',(#293311)); +#293311 = FILL_AREA_STYLE_COLOUR('',#282540); +#293312 = STYLED_ITEM('color',(#293313),#92149); +#293313 = PRESENTATION_STYLE_ASSIGNMENT((#293314)); +#293314 = SURFACE_STYLE_USAGE(.BOTH.,#293315); +#293315 = SURFACE_SIDE_STYLE('',(#293316)); +#293316 = SURFACE_STYLE_FILL_AREA(#293317); +#293317 = FILL_AREA_STYLE('',(#293318)); +#293318 = FILL_AREA_STYLE_COLOUR('',#282540); +#293319 = STYLED_ITEM('color',(#293320),#92174); +#293320 = PRESENTATION_STYLE_ASSIGNMENT((#293321)); +#293321 = SURFACE_STYLE_USAGE(.BOTH.,#293322); +#293322 = SURFACE_SIDE_STYLE('',(#293323)); +#293323 = SURFACE_STYLE_FILL_AREA(#293324); +#293324 = FILL_AREA_STYLE('',(#293325)); +#293325 = FILL_AREA_STYLE_COLOUR('',#282540); +#293326 = STYLED_ITEM('color',(#293327),#92199); +#293327 = PRESENTATION_STYLE_ASSIGNMENT((#293328)); +#293328 = SURFACE_STYLE_USAGE(.BOTH.,#293329); +#293329 = SURFACE_SIDE_STYLE('',(#293330)); +#293330 = SURFACE_STYLE_FILL_AREA(#293331); +#293331 = FILL_AREA_STYLE('',(#293332)); +#293332 = FILL_AREA_STYLE_COLOUR('',#282540); +#293333 = STYLED_ITEM('color',(#293334),#92232); +#293334 = PRESENTATION_STYLE_ASSIGNMENT((#293335)); +#293335 = SURFACE_STYLE_USAGE(.BOTH.,#293336); +#293336 = SURFACE_SIDE_STYLE('',(#293337)); +#293337 = SURFACE_STYLE_FILL_AREA(#293338); +#293338 = FILL_AREA_STYLE('',(#293339)); +#293339 = FILL_AREA_STYLE_COLOUR('',#282540); +#293340 = STYLED_ITEM('color',(#293341),#92265); +#293341 = PRESENTATION_STYLE_ASSIGNMENT((#293342)); +#293342 = SURFACE_STYLE_USAGE(.BOTH.,#293343); +#293343 = SURFACE_SIDE_STYLE('',(#293344)); +#293344 = SURFACE_STYLE_FILL_AREA(#293345); +#293345 = FILL_AREA_STYLE('',(#293346)); +#293346 = FILL_AREA_STYLE_COLOUR('',#282540); +#293347 = STYLED_ITEM('color',(#293348),#92305); +#293348 = PRESENTATION_STYLE_ASSIGNMENT((#293349)); +#293349 = SURFACE_STYLE_USAGE(.BOTH.,#293350); +#293350 = SURFACE_SIDE_STYLE('',(#293351)); +#293351 = SURFACE_STYLE_FILL_AREA(#293352); +#293352 = FILL_AREA_STYLE('',(#293353)); +#293353 = FILL_AREA_STYLE_COLOUR('',#282540); +#293354 = STYLED_ITEM('color',(#293355),#92345); +#293355 = PRESENTATION_STYLE_ASSIGNMENT((#293356)); +#293356 = SURFACE_STYLE_USAGE(.BOTH.,#293357); +#293357 = SURFACE_SIDE_STYLE('',(#293358)); +#293358 = SURFACE_STYLE_FILL_AREA(#293359); +#293359 = FILL_AREA_STYLE('',(#293360)); +#293360 = FILL_AREA_STYLE_COLOUR('',#282540); +#293361 = STYLED_ITEM('color',(#293362),#92370); +#293362 = PRESENTATION_STYLE_ASSIGNMENT((#293363)); +#293363 = SURFACE_STYLE_USAGE(.BOTH.,#293364); +#293364 = SURFACE_SIDE_STYLE('',(#293365)); +#293365 = SURFACE_STYLE_FILL_AREA(#293366); +#293366 = FILL_AREA_STYLE('',(#293367)); +#293367 = FILL_AREA_STYLE_COLOUR('',#282540); +#293368 = STYLED_ITEM('color',(#293369),#92395); +#293369 = PRESENTATION_STYLE_ASSIGNMENT((#293370)); +#293370 = SURFACE_STYLE_USAGE(.BOTH.,#293371); +#293371 = SURFACE_SIDE_STYLE('',(#293372)); +#293372 = SURFACE_STYLE_FILL_AREA(#293373); +#293373 = FILL_AREA_STYLE('',(#293374)); +#293374 = FILL_AREA_STYLE_COLOUR('',#282540); +#293375 = STYLED_ITEM('color',(#293376),#92428); +#293376 = PRESENTATION_STYLE_ASSIGNMENT((#293377)); +#293377 = SURFACE_STYLE_USAGE(.BOTH.,#293378); +#293378 = SURFACE_SIDE_STYLE('',(#293379)); +#293379 = SURFACE_STYLE_FILL_AREA(#293380); +#293380 = FILL_AREA_STYLE('',(#293381)); +#293381 = FILL_AREA_STYLE_COLOUR('',#282540); +#293382 = STYLED_ITEM('color',(#293383),#92461); +#293383 = PRESENTATION_STYLE_ASSIGNMENT((#293384)); +#293384 = SURFACE_STYLE_USAGE(.BOTH.,#293385); +#293385 = SURFACE_SIDE_STYLE('',(#293386)); +#293386 = SURFACE_STYLE_FILL_AREA(#293387); +#293387 = FILL_AREA_STYLE('',(#293388)); +#293388 = FILL_AREA_STYLE_COLOUR('',#282540); +#293389 = STYLED_ITEM('color',(#293390),#92501); +#293390 = PRESENTATION_STYLE_ASSIGNMENT((#293391)); +#293391 = SURFACE_STYLE_USAGE(.BOTH.,#293392); +#293392 = SURFACE_SIDE_STYLE('',(#293393)); +#293393 = SURFACE_STYLE_FILL_AREA(#293394); +#293394 = FILL_AREA_STYLE('',(#293395)); +#293395 = FILL_AREA_STYLE_COLOUR('',#282540); +#293396 = STYLED_ITEM('color',(#293397),#92541); +#293397 = PRESENTATION_STYLE_ASSIGNMENT((#293398)); +#293398 = SURFACE_STYLE_USAGE(.BOTH.,#293399); +#293399 = SURFACE_SIDE_STYLE('',(#293400)); +#293400 = SURFACE_STYLE_FILL_AREA(#293401); +#293401 = FILL_AREA_STYLE('',(#293402)); +#293402 = FILL_AREA_STYLE_COLOUR('',#282540); +#293403 = STYLED_ITEM('color',(#293404),#92566); +#293404 = PRESENTATION_STYLE_ASSIGNMENT((#293405)); +#293405 = SURFACE_STYLE_USAGE(.BOTH.,#293406); +#293406 = SURFACE_SIDE_STYLE('',(#293407)); +#293407 = SURFACE_STYLE_FILL_AREA(#293408); +#293408 = FILL_AREA_STYLE('',(#293409)); +#293409 = FILL_AREA_STYLE_COLOUR('',#282540); +#293410 = STYLED_ITEM('color',(#293411),#92591); +#293411 = PRESENTATION_STYLE_ASSIGNMENT((#293412)); +#293412 = SURFACE_STYLE_USAGE(.BOTH.,#293413); +#293413 = SURFACE_SIDE_STYLE('',(#293414)); +#293414 = SURFACE_STYLE_FILL_AREA(#293415); +#293415 = FILL_AREA_STYLE('',(#293416)); +#293416 = FILL_AREA_STYLE_COLOUR('',#282540); +#293417 = STYLED_ITEM('color',(#293418),#92624); +#293418 = PRESENTATION_STYLE_ASSIGNMENT((#293419)); +#293419 = SURFACE_STYLE_USAGE(.BOTH.,#293420); +#293420 = SURFACE_SIDE_STYLE('',(#293421)); +#293421 = SURFACE_STYLE_FILL_AREA(#293422); +#293422 = FILL_AREA_STYLE('',(#293423)); +#293423 = FILL_AREA_STYLE_COLOUR('',#282540); +#293424 = STYLED_ITEM('color',(#293425),#92657); +#293425 = PRESENTATION_STYLE_ASSIGNMENT((#293426)); +#293426 = SURFACE_STYLE_USAGE(.BOTH.,#293427); +#293427 = SURFACE_SIDE_STYLE('',(#293428)); +#293428 = SURFACE_STYLE_FILL_AREA(#293429); +#293429 = FILL_AREA_STYLE('',(#293430)); +#293430 = FILL_AREA_STYLE_COLOUR('',#279624); +#293431 = STYLED_ITEM('color',(#293432),#92842); +#293432 = PRESENTATION_STYLE_ASSIGNMENT((#293433)); +#293433 = SURFACE_STYLE_USAGE(.BOTH.,#293434); +#293434 = SURFACE_SIDE_STYLE('',(#293435)); +#293435 = SURFACE_STYLE_FILL_AREA(#293436); +#293436 = FILL_AREA_STYLE('',(#293437)); +#293437 = FILL_AREA_STYLE_COLOUR('',#282540); +#293438 = STYLED_ITEM('color',(#293439),#92882); +#293439 = PRESENTATION_STYLE_ASSIGNMENT((#293440)); +#293440 = SURFACE_STYLE_USAGE(.BOTH.,#293441); +#293441 = SURFACE_SIDE_STYLE('',(#293442)); +#293442 = SURFACE_STYLE_FILL_AREA(#293443); +#293443 = FILL_AREA_STYLE('',(#293444)); +#293444 = FILL_AREA_STYLE_COLOUR('',#282540); +#293445 = STYLED_ITEM('color',(#293446),#92922); +#293446 = PRESENTATION_STYLE_ASSIGNMENT((#293447)); +#293447 = SURFACE_STYLE_USAGE(.BOTH.,#293448); +#293448 = SURFACE_SIDE_STYLE('',(#293449)); +#293449 = SURFACE_STYLE_FILL_AREA(#293450); +#293450 = FILL_AREA_STYLE('',(#293451)); +#293451 = FILL_AREA_STYLE_COLOUR('',#282540); +#293452 = STYLED_ITEM('color',(#293453),#92947); +#293453 = PRESENTATION_STYLE_ASSIGNMENT((#293454)); +#293454 = SURFACE_STYLE_USAGE(.BOTH.,#293455); +#293455 = SURFACE_SIDE_STYLE('',(#293456)); +#293456 = SURFACE_STYLE_FILL_AREA(#293457); +#293457 = FILL_AREA_STYLE('',(#293458)); +#293458 = FILL_AREA_STYLE_COLOUR('',#282540); +#293459 = STYLED_ITEM('color',(#293460),#92972); +#293460 = PRESENTATION_STYLE_ASSIGNMENT((#293461)); +#293461 = SURFACE_STYLE_USAGE(.BOTH.,#293462); +#293462 = SURFACE_SIDE_STYLE('',(#293463)); +#293463 = SURFACE_STYLE_FILL_AREA(#293464); +#293464 = FILL_AREA_STYLE('',(#293465)); +#293465 = FILL_AREA_STYLE_COLOUR('',#282540); +#293466 = STYLED_ITEM('color',(#293467),#93005); +#293467 = PRESENTATION_STYLE_ASSIGNMENT((#293468)); +#293468 = SURFACE_STYLE_USAGE(.BOTH.,#293469); +#293469 = SURFACE_SIDE_STYLE('',(#293470)); +#293470 = SURFACE_STYLE_FILL_AREA(#293471); +#293471 = FILL_AREA_STYLE('',(#293472)); +#293472 = FILL_AREA_STYLE_COLOUR('',#282540); +#293473 = STYLED_ITEM('color',(#293474),#93038); +#293474 = PRESENTATION_STYLE_ASSIGNMENT((#293475)); +#293475 = SURFACE_STYLE_USAGE(.BOTH.,#293476); +#293476 = SURFACE_SIDE_STYLE('',(#293477)); +#293477 = SURFACE_STYLE_FILL_AREA(#293478); +#293478 = FILL_AREA_STYLE('',(#293479)); +#293479 = FILL_AREA_STYLE_COLOUR('',#282540); +#293480 = STYLED_ITEM('color',(#293481),#93078); +#293481 = PRESENTATION_STYLE_ASSIGNMENT((#293482)); +#293482 = SURFACE_STYLE_USAGE(.BOTH.,#293483); +#293483 = SURFACE_SIDE_STYLE('',(#293484)); +#293484 = SURFACE_STYLE_FILL_AREA(#293485); +#293485 = FILL_AREA_STYLE('',(#293486)); +#293486 = FILL_AREA_STYLE_COLOUR('',#282540); +#293487 = STYLED_ITEM('color',(#293488),#93118); +#293488 = PRESENTATION_STYLE_ASSIGNMENT((#293489)); +#293489 = SURFACE_STYLE_USAGE(.BOTH.,#293490); +#293490 = SURFACE_SIDE_STYLE('',(#293491)); +#293491 = SURFACE_STYLE_FILL_AREA(#293492); +#293492 = FILL_AREA_STYLE('',(#293493)); +#293493 = FILL_AREA_STYLE_COLOUR('',#282540); +#293494 = STYLED_ITEM('color',(#293495),#93143); +#293495 = PRESENTATION_STYLE_ASSIGNMENT((#293496)); +#293496 = SURFACE_STYLE_USAGE(.BOTH.,#293497); +#293497 = SURFACE_SIDE_STYLE('',(#293498)); +#293498 = SURFACE_STYLE_FILL_AREA(#293499); +#293499 = FILL_AREA_STYLE('',(#293500)); +#293500 = FILL_AREA_STYLE_COLOUR('',#282540); +#293501 = STYLED_ITEM('color',(#293502),#93168); +#293502 = PRESENTATION_STYLE_ASSIGNMENT((#293503)); +#293503 = SURFACE_STYLE_USAGE(.BOTH.,#293504); +#293504 = SURFACE_SIDE_STYLE('',(#293505)); +#293505 = SURFACE_STYLE_FILL_AREA(#293506); +#293506 = FILL_AREA_STYLE('',(#293507)); +#293507 = FILL_AREA_STYLE_COLOUR('',#282540); +#293508 = STYLED_ITEM('color',(#293509),#93201); +#293509 = PRESENTATION_STYLE_ASSIGNMENT((#293510)); +#293510 = SURFACE_STYLE_USAGE(.BOTH.,#293511); +#293511 = SURFACE_SIDE_STYLE('',(#293512)); +#293512 = SURFACE_STYLE_FILL_AREA(#293513); +#293513 = FILL_AREA_STYLE('',(#293514)); +#293514 = FILL_AREA_STYLE_COLOUR('',#282540); +#293515 = STYLED_ITEM('color',(#293516),#93234); +#293516 = PRESENTATION_STYLE_ASSIGNMENT((#293517)); +#293517 = SURFACE_STYLE_USAGE(.BOTH.,#293518); +#293518 = SURFACE_SIDE_STYLE('',(#293519)); +#293519 = SURFACE_STYLE_FILL_AREA(#293520); +#293520 = FILL_AREA_STYLE('',(#293521)); +#293521 = FILL_AREA_STYLE_COLOUR('',#279624); +#293522 = STYLED_ITEM('color',(#293523),#93366); +#293523 = PRESENTATION_STYLE_ASSIGNMENT((#293524)); +#293524 = SURFACE_STYLE_USAGE(.BOTH.,#293525); +#293525 = SURFACE_SIDE_STYLE('',(#293526)); +#293526 = SURFACE_STYLE_FILL_AREA(#293527); +#293527 = FILL_AREA_STYLE('',(#293528)); +#293528 = FILL_AREA_STYLE_COLOUR('',#282540); +#293529 = STYLED_ITEM('color',(#293530),#93406); +#293530 = PRESENTATION_STYLE_ASSIGNMENT((#293531)); +#293531 = SURFACE_STYLE_USAGE(.BOTH.,#293532); +#293532 = SURFACE_SIDE_STYLE('',(#293533)); +#293533 = SURFACE_STYLE_FILL_AREA(#293534); +#293534 = FILL_AREA_STYLE('',(#293535)); +#293535 = FILL_AREA_STYLE_COLOUR('',#282540); +#293536 = STYLED_ITEM('color',(#293537),#93446); +#293537 = PRESENTATION_STYLE_ASSIGNMENT((#293538)); +#293538 = SURFACE_STYLE_USAGE(.BOTH.,#293539); +#293539 = SURFACE_SIDE_STYLE('',(#293540)); +#293540 = SURFACE_STYLE_FILL_AREA(#293541); +#293541 = FILL_AREA_STYLE('',(#293542)); +#293542 = FILL_AREA_STYLE_COLOUR('',#282540); +#293543 = STYLED_ITEM('color',(#293544),#93471); +#293544 = PRESENTATION_STYLE_ASSIGNMENT((#293545)); +#293545 = SURFACE_STYLE_USAGE(.BOTH.,#293546); +#293546 = SURFACE_SIDE_STYLE('',(#293547)); +#293547 = SURFACE_STYLE_FILL_AREA(#293548); +#293548 = FILL_AREA_STYLE('',(#293549)); +#293549 = FILL_AREA_STYLE_COLOUR('',#282540); +#293550 = STYLED_ITEM('color',(#293551),#93496); +#293551 = PRESENTATION_STYLE_ASSIGNMENT((#293552)); +#293552 = SURFACE_STYLE_USAGE(.BOTH.,#293553); +#293553 = SURFACE_SIDE_STYLE('',(#293554)); +#293554 = SURFACE_STYLE_FILL_AREA(#293555); +#293555 = FILL_AREA_STYLE('',(#293556)); +#293556 = FILL_AREA_STYLE_COLOUR('',#282540); +#293557 = STYLED_ITEM('color',(#293558),#93529); +#293558 = PRESENTATION_STYLE_ASSIGNMENT((#293559)); +#293559 = SURFACE_STYLE_USAGE(.BOTH.,#293560); +#293560 = SURFACE_SIDE_STYLE('',(#293561)); +#293561 = SURFACE_STYLE_FILL_AREA(#293562); +#293562 = FILL_AREA_STYLE('',(#293563)); +#293563 = FILL_AREA_STYLE_COLOUR('',#282540); +#293564 = STYLED_ITEM('color',(#293565),#93562); +#293565 = PRESENTATION_STYLE_ASSIGNMENT((#293566)); +#293566 = SURFACE_STYLE_USAGE(.BOTH.,#293567); +#293567 = SURFACE_SIDE_STYLE('',(#293568)); +#293568 = SURFACE_STYLE_FILL_AREA(#293569); +#293569 = FILL_AREA_STYLE('',(#293570)); +#293570 = FILL_AREA_STYLE_COLOUR('',#282540); +#293571 = STYLED_ITEM('color',(#293572),#93602); +#293572 = PRESENTATION_STYLE_ASSIGNMENT((#293573)); +#293573 = SURFACE_STYLE_USAGE(.BOTH.,#293574); +#293574 = SURFACE_SIDE_STYLE('',(#293575)); +#293575 = SURFACE_STYLE_FILL_AREA(#293576); +#293576 = FILL_AREA_STYLE('',(#293577)); +#293577 = FILL_AREA_STYLE_COLOUR('',#282540); +#293578 = STYLED_ITEM('color',(#293579),#93642); +#293579 = PRESENTATION_STYLE_ASSIGNMENT((#293580)); +#293580 = SURFACE_STYLE_USAGE(.BOTH.,#293581); +#293581 = SURFACE_SIDE_STYLE('',(#293582)); +#293582 = SURFACE_STYLE_FILL_AREA(#293583); +#293583 = FILL_AREA_STYLE('',(#293584)); +#293584 = FILL_AREA_STYLE_COLOUR('',#282540); +#293585 = STYLED_ITEM('color',(#293586),#93667); +#293586 = PRESENTATION_STYLE_ASSIGNMENT((#293587)); +#293587 = SURFACE_STYLE_USAGE(.BOTH.,#293588); +#293588 = SURFACE_SIDE_STYLE('',(#293589)); +#293589 = SURFACE_STYLE_FILL_AREA(#293590); +#293590 = FILL_AREA_STYLE('',(#293591)); +#293591 = FILL_AREA_STYLE_COLOUR('',#282540); +#293592 = STYLED_ITEM('color',(#293593),#93692); +#293593 = PRESENTATION_STYLE_ASSIGNMENT((#293594)); +#293594 = SURFACE_STYLE_USAGE(.BOTH.,#293595); +#293595 = SURFACE_SIDE_STYLE('',(#293596)); +#293596 = SURFACE_STYLE_FILL_AREA(#293597); +#293597 = FILL_AREA_STYLE('',(#293598)); +#293598 = FILL_AREA_STYLE_COLOUR('',#282540); +#293599 = STYLED_ITEM('color',(#293600),#93725); +#293600 = PRESENTATION_STYLE_ASSIGNMENT((#293601)); +#293601 = SURFACE_STYLE_USAGE(.BOTH.,#293602); +#293602 = SURFACE_SIDE_STYLE('',(#293603)); +#293603 = SURFACE_STYLE_FILL_AREA(#293604); +#293604 = FILL_AREA_STYLE('',(#293605)); +#293605 = FILL_AREA_STYLE_COLOUR('',#282540); +#293606 = STYLED_ITEM('color',(#293607),#93758); +#293607 = PRESENTATION_STYLE_ASSIGNMENT((#293608)); +#293608 = SURFACE_STYLE_USAGE(.BOTH.,#293609); +#293609 = SURFACE_SIDE_STYLE('',(#293610)); +#293610 = SURFACE_STYLE_FILL_AREA(#293611); +#293611 = FILL_AREA_STYLE('',(#293612)); +#293612 = FILL_AREA_STYLE_COLOUR('',#282540); +#293613 = STYLED_ITEM('color',(#293614),#93798); +#293614 = PRESENTATION_STYLE_ASSIGNMENT((#293615)); +#293615 = SURFACE_STYLE_USAGE(.BOTH.,#293616); +#293616 = SURFACE_SIDE_STYLE('',(#293617)); +#293617 = SURFACE_STYLE_FILL_AREA(#293618); +#293618 = FILL_AREA_STYLE('',(#293619)); +#293619 = FILL_AREA_STYLE_COLOUR('',#282540); +#293620 = STYLED_ITEM('color',(#293621),#93838); +#293621 = PRESENTATION_STYLE_ASSIGNMENT((#293622)); +#293622 = SURFACE_STYLE_USAGE(.BOTH.,#293623); +#293623 = SURFACE_SIDE_STYLE('',(#293624)); +#293624 = SURFACE_STYLE_FILL_AREA(#293625); +#293625 = FILL_AREA_STYLE('',(#293626)); +#293626 = FILL_AREA_STYLE_COLOUR('',#282540); +#293627 = STYLED_ITEM('color',(#293628),#93863); +#293628 = PRESENTATION_STYLE_ASSIGNMENT((#293629)); +#293629 = SURFACE_STYLE_USAGE(.BOTH.,#293630); +#293630 = SURFACE_SIDE_STYLE('',(#293631)); +#293631 = SURFACE_STYLE_FILL_AREA(#293632); +#293632 = FILL_AREA_STYLE('',(#293633)); +#293633 = FILL_AREA_STYLE_COLOUR('',#282540); +#293634 = STYLED_ITEM('color',(#293635),#93888); +#293635 = PRESENTATION_STYLE_ASSIGNMENT((#293636)); +#293636 = SURFACE_STYLE_USAGE(.BOTH.,#293637); +#293637 = SURFACE_SIDE_STYLE('',(#293638)); +#293638 = SURFACE_STYLE_FILL_AREA(#293639); +#293639 = FILL_AREA_STYLE('',(#293640)); +#293640 = FILL_AREA_STYLE_COLOUR('',#282540); +#293641 = STYLED_ITEM('color',(#293642),#93921); +#293642 = PRESENTATION_STYLE_ASSIGNMENT((#293643)); +#293643 = SURFACE_STYLE_USAGE(.BOTH.,#293644); +#293644 = SURFACE_SIDE_STYLE('',(#293645)); +#293645 = SURFACE_STYLE_FILL_AREA(#293646); +#293646 = FILL_AREA_STYLE('',(#293647)); +#293647 = FILL_AREA_STYLE_COLOUR('',#282540); +#293648 = STYLED_ITEM('color',(#293649),#93954); +#293649 = PRESENTATION_STYLE_ASSIGNMENT((#293650)); +#293650 = SURFACE_STYLE_USAGE(.BOTH.,#293651); +#293651 = SURFACE_SIDE_STYLE('',(#293652)); +#293652 = SURFACE_STYLE_FILL_AREA(#293653); +#293653 = FILL_AREA_STYLE('',(#293654)); +#293654 = FILL_AREA_STYLE_COLOUR('',#282540); +#293655 = STYLED_ITEM('color',(#293656),#93994); +#293656 = PRESENTATION_STYLE_ASSIGNMENT((#293657)); +#293657 = SURFACE_STYLE_USAGE(.BOTH.,#293658); +#293658 = SURFACE_SIDE_STYLE('',(#293659)); +#293659 = SURFACE_STYLE_FILL_AREA(#293660); +#293660 = FILL_AREA_STYLE('',(#293661)); +#293661 = FILL_AREA_STYLE_COLOUR('',#282540); +#293662 = STYLED_ITEM('color',(#293663),#94034); +#293663 = PRESENTATION_STYLE_ASSIGNMENT((#293664)); +#293664 = SURFACE_STYLE_USAGE(.BOTH.,#293665); +#293665 = SURFACE_SIDE_STYLE('',(#293666)); +#293666 = SURFACE_STYLE_FILL_AREA(#293667); +#293667 = FILL_AREA_STYLE('',(#293668)); +#293668 = FILL_AREA_STYLE_COLOUR('',#282540); +#293669 = STYLED_ITEM('color',(#293670),#94059); +#293670 = PRESENTATION_STYLE_ASSIGNMENT((#293671)); +#293671 = SURFACE_STYLE_USAGE(.BOTH.,#293672); +#293672 = SURFACE_SIDE_STYLE('',(#293673)); +#293673 = SURFACE_STYLE_FILL_AREA(#293674); +#293674 = FILL_AREA_STYLE('',(#293675)); +#293675 = FILL_AREA_STYLE_COLOUR('',#282540); +#293676 = STYLED_ITEM('color',(#293677),#94084); +#293677 = PRESENTATION_STYLE_ASSIGNMENT((#293678)); +#293678 = SURFACE_STYLE_USAGE(.BOTH.,#293679); +#293679 = SURFACE_SIDE_STYLE('',(#293680)); +#293680 = SURFACE_STYLE_FILL_AREA(#293681); +#293681 = FILL_AREA_STYLE('',(#293682)); +#293682 = FILL_AREA_STYLE_COLOUR('',#282540); +#293683 = STYLED_ITEM('color',(#293684),#94117); +#293684 = PRESENTATION_STYLE_ASSIGNMENT((#293685)); +#293685 = SURFACE_STYLE_USAGE(.BOTH.,#293686); +#293686 = SURFACE_SIDE_STYLE('',(#293687)); +#293687 = SURFACE_STYLE_FILL_AREA(#293688); +#293688 = FILL_AREA_STYLE('',(#293689)); +#293689 = FILL_AREA_STYLE_COLOUR('',#282540); +#293690 = STYLED_ITEM('color',(#293691),#94150); +#293691 = PRESENTATION_STYLE_ASSIGNMENT((#293692)); +#293692 = SURFACE_STYLE_USAGE(.BOTH.,#293693); +#293693 = SURFACE_SIDE_STYLE('',(#293694)); +#293694 = SURFACE_STYLE_FILL_AREA(#293695); +#293695 = FILL_AREA_STYLE('',(#293696)); +#293696 = FILL_AREA_STYLE_COLOUR('',#282540); +#293697 = STYLED_ITEM('color',(#293698),#94190); +#293698 = PRESENTATION_STYLE_ASSIGNMENT((#293699)); +#293699 = SURFACE_STYLE_USAGE(.BOTH.,#293700); +#293700 = SURFACE_SIDE_STYLE('',(#293701)); +#293701 = SURFACE_STYLE_FILL_AREA(#293702); +#293702 = FILL_AREA_STYLE('',(#293703)); +#293703 = FILL_AREA_STYLE_COLOUR('',#282540); +#293704 = STYLED_ITEM('color',(#293705),#94230); +#293705 = PRESENTATION_STYLE_ASSIGNMENT((#293706)); +#293706 = SURFACE_STYLE_USAGE(.BOTH.,#293707); +#293707 = SURFACE_SIDE_STYLE('',(#293708)); +#293708 = SURFACE_STYLE_FILL_AREA(#293709); +#293709 = FILL_AREA_STYLE('',(#293710)); +#293710 = FILL_AREA_STYLE_COLOUR('',#282540); +#293711 = STYLED_ITEM('color',(#293712),#94255); +#293712 = PRESENTATION_STYLE_ASSIGNMENT((#293713)); +#293713 = SURFACE_STYLE_USAGE(.BOTH.,#293714); +#293714 = SURFACE_SIDE_STYLE('',(#293715)); +#293715 = SURFACE_STYLE_FILL_AREA(#293716); +#293716 = FILL_AREA_STYLE('',(#293717)); +#293717 = FILL_AREA_STYLE_COLOUR('',#282540); +#293718 = STYLED_ITEM('color',(#293719),#94280); +#293719 = PRESENTATION_STYLE_ASSIGNMENT((#293720)); +#293720 = SURFACE_STYLE_USAGE(.BOTH.,#293721); +#293721 = SURFACE_SIDE_STYLE('',(#293722)); +#293722 = SURFACE_STYLE_FILL_AREA(#293723); +#293723 = FILL_AREA_STYLE('',(#293724)); +#293724 = FILL_AREA_STYLE_COLOUR('',#282540); +#293725 = STYLED_ITEM('color',(#293726),#94313); +#293726 = PRESENTATION_STYLE_ASSIGNMENT((#293727)); +#293727 = SURFACE_STYLE_USAGE(.BOTH.,#293728); +#293728 = SURFACE_SIDE_STYLE('',(#293729)); +#293729 = SURFACE_STYLE_FILL_AREA(#293730); +#293730 = FILL_AREA_STYLE('',(#293731)); +#293731 = FILL_AREA_STYLE_COLOUR('',#282540); +#293732 = STYLED_ITEM('color',(#293733),#94346); +#293733 = PRESENTATION_STYLE_ASSIGNMENT((#293734)); +#293734 = SURFACE_STYLE_USAGE(.BOTH.,#293735); +#293735 = SURFACE_SIDE_STYLE('',(#293736)); +#293736 = SURFACE_STYLE_FILL_AREA(#293737); +#293737 = FILL_AREA_STYLE('',(#293738)); +#293738 = FILL_AREA_STYLE_COLOUR('',#282540); +#293739 = STYLED_ITEM('color',(#293740),#94377); +#293740 = PRESENTATION_STYLE_ASSIGNMENT((#293741)); +#293741 = SURFACE_STYLE_USAGE(.BOTH.,#293742); +#293742 = SURFACE_SIDE_STYLE('',(#293743)); +#293743 = SURFACE_STYLE_FILL_AREA(#293744); +#293744 = FILL_AREA_STYLE('',(#293745)); +#293745 = FILL_AREA_STYLE_COLOUR('',#282540); +#293746 = STYLED_ITEM('color',(#293747),#94401); +#293747 = PRESENTATION_STYLE_ASSIGNMENT((#293748)); +#293748 = SURFACE_STYLE_USAGE(.BOTH.,#293749); +#293749 = SURFACE_SIDE_STYLE('',(#293750)); +#293750 = SURFACE_STYLE_FILL_AREA(#293751); +#293751 = FILL_AREA_STYLE('',(#293752)); +#293752 = FILL_AREA_STYLE_COLOUR('',#282540); +#293753 = STYLED_ITEM('color',(#293754),#94425); +#293754 = PRESENTATION_STYLE_ASSIGNMENT((#293755)); +#293755 = SURFACE_STYLE_USAGE(.BOTH.,#293756); +#293756 = SURFACE_SIDE_STYLE('',(#293757)); +#293757 = SURFACE_STYLE_FILL_AREA(#293758); +#293758 = FILL_AREA_STYLE('',(#293759)); +#293759 = FILL_AREA_STYLE_COLOUR('',#282540); +#293760 = STYLED_ITEM('color',(#293761),#94449); +#293761 = PRESENTATION_STYLE_ASSIGNMENT((#293762)); +#293762 = SURFACE_STYLE_USAGE(.BOTH.,#293763); +#293763 = SURFACE_SIDE_STYLE('',(#293764)); +#293764 = SURFACE_STYLE_FILL_AREA(#293765); +#293765 = FILL_AREA_STYLE('',(#293766)); +#293766 = FILL_AREA_STYLE_COLOUR('',#282540); +#293767 = STYLED_ITEM('color',(#293768),#94466); +#293768 = PRESENTATION_STYLE_ASSIGNMENT((#293769)); +#293769 = SURFACE_STYLE_USAGE(.BOTH.,#293770); +#293770 = SURFACE_SIDE_STYLE('',(#293771)); +#293771 = SURFACE_STYLE_FILL_AREA(#293772); +#293772 = FILL_AREA_STYLE('',(#293773)); +#293773 = FILL_AREA_STYLE_COLOUR('',#279624); +#293774 = STYLED_ITEM('color',(#293775),#94489); +#293775 = PRESENTATION_STYLE_ASSIGNMENT((#293776)); +#293776 = SURFACE_STYLE_USAGE(.BOTH.,#293777); +#293777 = SURFACE_SIDE_STYLE('',(#293778)); +#293778 = SURFACE_STYLE_FILL_AREA(#293779); +#293779 = FILL_AREA_STYLE('',(#293780)); +#293780 = FILL_AREA_STYLE_COLOUR('',#282540); +#293781 = STYLED_ITEM('color',(#293782),#94506); +#293782 = PRESENTATION_STYLE_ASSIGNMENT((#293783)); +#293783 = SURFACE_STYLE_USAGE(.BOTH.,#293784); +#293784 = SURFACE_SIDE_STYLE('',(#293785)); +#293785 = SURFACE_STYLE_FILL_AREA(#293786); +#293786 = FILL_AREA_STYLE('',(#293787)); +#293787 = FILL_AREA_STYLE_COLOUR('',#282540); +#293788 = STYLED_ITEM('color',(#293789),#94523); +#293789 = PRESENTATION_STYLE_ASSIGNMENT((#293790)); +#293790 = SURFACE_STYLE_USAGE(.BOTH.,#293791); +#293791 = SURFACE_SIDE_STYLE('',(#293792)); +#293792 = SURFACE_STYLE_FILL_AREA(#293793); +#293793 = FILL_AREA_STYLE('',(#293794)); +#293794 = FILL_AREA_STYLE_COLOUR('',#282540); +#293795 = STYLED_ITEM('color',(#293796),#94540); +#293796 = PRESENTATION_STYLE_ASSIGNMENT((#293797)); +#293797 = SURFACE_STYLE_USAGE(.BOTH.,#293798); +#293798 = SURFACE_SIDE_STYLE('',(#293799)); +#293799 = SURFACE_STYLE_FILL_AREA(#293800); +#293800 = FILL_AREA_STYLE('',(#293801)); +#293801 = FILL_AREA_STYLE_COLOUR('',#282540); +#293802 = STYLED_ITEM('color',(#293803),#94557); +#293803 = PRESENTATION_STYLE_ASSIGNMENT((#293804)); +#293804 = SURFACE_STYLE_USAGE(.BOTH.,#293805); +#293805 = SURFACE_SIDE_STYLE('',(#293806)); +#293806 = SURFACE_STYLE_FILL_AREA(#293807); +#293807 = FILL_AREA_STYLE('',(#293808)); +#293808 = FILL_AREA_STYLE_COLOUR('',#282540); +#293809 = STYLED_ITEM('color',(#293810),#94574); +#293810 = PRESENTATION_STYLE_ASSIGNMENT((#293811)); +#293811 = SURFACE_STYLE_USAGE(.BOTH.,#293812); +#293812 = SURFACE_SIDE_STYLE('',(#293813)); +#293813 = SURFACE_STYLE_FILL_AREA(#293814); +#293814 = FILL_AREA_STYLE('',(#293815)); +#293815 = FILL_AREA_STYLE_COLOUR('',#282540); +#293816 = STYLED_ITEM('color',(#293817),#94591); +#293817 = PRESENTATION_STYLE_ASSIGNMENT((#293818)); +#293818 = SURFACE_STYLE_USAGE(.BOTH.,#293819); +#293819 = SURFACE_SIDE_STYLE('',(#293820)); +#293820 = SURFACE_STYLE_FILL_AREA(#293821); +#293821 = FILL_AREA_STYLE('',(#293822)); +#293822 = FILL_AREA_STYLE_COLOUR('',#282540); +#293823 = STYLED_ITEM('color',(#293824),#94608); +#293824 = PRESENTATION_STYLE_ASSIGNMENT((#293825)); +#293825 = SURFACE_STYLE_USAGE(.BOTH.,#293826); +#293826 = SURFACE_SIDE_STYLE('',(#293827)); +#293827 = SURFACE_STYLE_FILL_AREA(#293828); +#293828 = FILL_AREA_STYLE('',(#293829)); +#293829 = FILL_AREA_STYLE_COLOUR('',#282540); +#293830 = STYLED_ITEM('color',(#293831),#94625); +#293831 = PRESENTATION_STYLE_ASSIGNMENT((#293832)); +#293832 = SURFACE_STYLE_USAGE(.BOTH.,#293833); +#293833 = SURFACE_SIDE_STYLE('',(#293834)); +#293834 = SURFACE_STYLE_FILL_AREA(#293835); +#293835 = FILL_AREA_STYLE('',(#293836)); +#293836 = FILL_AREA_STYLE_COLOUR('',#282540); +#293837 = STYLED_ITEM('color',(#293838),#94642); +#293838 = PRESENTATION_STYLE_ASSIGNMENT((#293839)); +#293839 = SURFACE_STYLE_USAGE(.BOTH.,#293840); +#293840 = SURFACE_SIDE_STYLE('',(#293841)); +#293841 = SURFACE_STYLE_FILL_AREA(#293842); +#293842 = FILL_AREA_STYLE('',(#293843)); +#293843 = FILL_AREA_STYLE_COLOUR('',#282540); +#293844 = STYLED_ITEM('color',(#293845),#94659); +#293845 = PRESENTATION_STYLE_ASSIGNMENT((#293846)); +#293846 = SURFACE_STYLE_USAGE(.BOTH.,#293847); +#293847 = SURFACE_SIDE_STYLE('',(#293848)); +#293848 = SURFACE_STYLE_FILL_AREA(#293849); +#293849 = FILL_AREA_STYLE('',(#293850)); +#293850 = FILL_AREA_STYLE_COLOUR('',#282540); +#293851 = STYLED_ITEM('color',(#293852),#94676); +#293852 = PRESENTATION_STYLE_ASSIGNMENT((#293853)); +#293853 = SURFACE_STYLE_USAGE(.BOTH.,#293854); +#293854 = SURFACE_SIDE_STYLE('',(#293855)); +#293855 = SURFACE_STYLE_FILL_AREA(#293856); +#293856 = FILL_AREA_STYLE('',(#293857)); +#293857 = FILL_AREA_STYLE_COLOUR('',#282540); +#293858 = STYLED_ITEM('color',(#293859),#94693); +#293859 = PRESENTATION_STYLE_ASSIGNMENT((#293860)); +#293860 = SURFACE_STYLE_USAGE(.BOTH.,#293861); +#293861 = SURFACE_SIDE_STYLE('',(#293862)); +#293862 = SURFACE_STYLE_FILL_AREA(#293863); +#293863 = FILL_AREA_STYLE('',(#293864)); +#293864 = FILL_AREA_STYLE_COLOUR('',#282540); +#293865 = STYLED_ITEM('color',(#293866),#94705); +#293866 = PRESENTATION_STYLE_ASSIGNMENT((#293867)); +#293867 = SURFACE_STYLE_USAGE(.BOTH.,#293868); +#293868 = SURFACE_SIDE_STYLE('',(#293869)); +#293869 = SURFACE_STYLE_FILL_AREA(#293870); +#293870 = FILL_AREA_STYLE('',(#293871)); +#293871 = FILL_AREA_STYLE_COLOUR('',#282540); +#293872 = STYLED_ITEM('color',(#293873),#94722); +#293873 = PRESENTATION_STYLE_ASSIGNMENT((#293874)); +#293874 = SURFACE_STYLE_USAGE(.BOTH.,#293875); +#293875 = SURFACE_SIDE_STYLE('',(#293876)); +#293876 = SURFACE_STYLE_FILL_AREA(#293877); +#293877 = FILL_AREA_STYLE('',(#293878)); +#293878 = FILL_AREA_STYLE_COLOUR('',#282540); +#293879 = STYLED_ITEM('color',(#293880),#94734); +#293880 = PRESENTATION_STYLE_ASSIGNMENT((#293881)); +#293881 = SURFACE_STYLE_USAGE(.BOTH.,#293882); +#293882 = SURFACE_SIDE_STYLE('',(#293883)); +#293883 = SURFACE_STYLE_FILL_AREA(#293884); +#293884 = FILL_AREA_STYLE('',(#293885)); +#293885 = FILL_AREA_STYLE_COLOUR('',#282540); +#293886 = STYLED_ITEM('color',(#293887),#94751); +#293887 = PRESENTATION_STYLE_ASSIGNMENT((#293888)); +#293888 = SURFACE_STYLE_USAGE(.BOTH.,#293889); +#293889 = SURFACE_SIDE_STYLE('',(#293890)); +#293890 = SURFACE_STYLE_FILL_AREA(#293891); +#293891 = FILL_AREA_STYLE('',(#293892)); +#293892 = FILL_AREA_STYLE_COLOUR('',#282540); +#293893 = STYLED_ITEM('color',(#293894),#94763); +#293894 = PRESENTATION_STYLE_ASSIGNMENT((#293895)); +#293895 = SURFACE_STYLE_USAGE(.BOTH.,#293896); +#293896 = SURFACE_SIDE_STYLE('',(#293897)); +#293897 = SURFACE_STYLE_FILL_AREA(#293898); +#293898 = FILL_AREA_STYLE('',(#293899)); +#293899 = FILL_AREA_STYLE_COLOUR('',#282540); +#293900 = STYLED_ITEM('color',(#293901),#94780); +#293901 = PRESENTATION_STYLE_ASSIGNMENT((#293902)); +#293902 = SURFACE_STYLE_USAGE(.BOTH.,#293903); +#293903 = SURFACE_SIDE_STYLE('',(#293904)); +#293904 = SURFACE_STYLE_FILL_AREA(#293905); +#293905 = FILL_AREA_STYLE('',(#293906)); +#293906 = FILL_AREA_STYLE_COLOUR('',#282540); +#293907 = STYLED_ITEM('color',(#293908),#94792); +#293908 = PRESENTATION_STYLE_ASSIGNMENT((#293909)); +#293909 = SURFACE_STYLE_USAGE(.BOTH.,#293910); +#293910 = SURFACE_SIDE_STYLE('',(#293911)); +#293911 = SURFACE_STYLE_FILL_AREA(#293912); +#293912 = FILL_AREA_STYLE('',(#293913)); +#293913 = FILL_AREA_STYLE_COLOUR('',#282540); +#293914 = STYLED_ITEM('color',(#293915),#94809); +#293915 = PRESENTATION_STYLE_ASSIGNMENT((#293916)); +#293916 = SURFACE_STYLE_USAGE(.BOTH.,#293917); +#293917 = SURFACE_SIDE_STYLE('',(#293918)); +#293918 = SURFACE_STYLE_FILL_AREA(#293919); +#293919 = FILL_AREA_STYLE('',(#293920)); +#293920 = FILL_AREA_STYLE_COLOUR('',#282540); +#293921 = STYLED_ITEM('color',(#293922),#94821); +#293922 = PRESENTATION_STYLE_ASSIGNMENT((#293923)); +#293923 = SURFACE_STYLE_USAGE(.BOTH.,#293924); +#293924 = SURFACE_SIDE_STYLE('',(#293925)); +#293925 = SURFACE_STYLE_FILL_AREA(#293926); +#293926 = FILL_AREA_STYLE('',(#293927)); +#293927 = FILL_AREA_STYLE_COLOUR('',#282540); +#293928 = STYLED_ITEM('color',(#293929),#94838); +#293929 = PRESENTATION_STYLE_ASSIGNMENT((#293930)); +#293930 = SURFACE_STYLE_USAGE(.BOTH.,#293931); +#293931 = SURFACE_SIDE_STYLE('',(#293932)); +#293932 = SURFACE_STYLE_FILL_AREA(#293933); +#293933 = FILL_AREA_STYLE('',(#293934)); +#293934 = FILL_AREA_STYLE_COLOUR('',#282540); +#293935 = STYLED_ITEM('color',(#293936),#94850); +#293936 = PRESENTATION_STYLE_ASSIGNMENT((#293937)); +#293937 = SURFACE_STYLE_USAGE(.BOTH.,#293938); +#293938 = SURFACE_SIDE_STYLE('',(#293939)); +#293939 = SURFACE_STYLE_FILL_AREA(#293940); +#293940 = FILL_AREA_STYLE('',(#293941)); +#293941 = FILL_AREA_STYLE_COLOUR('',#282540); +#293942 = STYLED_ITEM('color',(#293943),#94867); +#293943 = PRESENTATION_STYLE_ASSIGNMENT((#293944)); +#293944 = SURFACE_STYLE_USAGE(.BOTH.,#293945); +#293945 = SURFACE_SIDE_STYLE('',(#293946)); +#293946 = SURFACE_STYLE_FILL_AREA(#293947); +#293947 = FILL_AREA_STYLE('',(#293948)); +#293948 = FILL_AREA_STYLE_COLOUR('',#282540); +#293949 = STYLED_ITEM('color',(#293950),#94879); +#293950 = PRESENTATION_STYLE_ASSIGNMENT((#293951)); +#293951 = SURFACE_STYLE_USAGE(.BOTH.,#293952); +#293952 = SURFACE_SIDE_STYLE('',(#293953)); +#293953 = SURFACE_STYLE_FILL_AREA(#293954); +#293954 = FILL_AREA_STYLE('',(#293955)); +#293955 = FILL_AREA_STYLE_COLOUR('',#282540); +#293956 = STYLED_ITEM('color',(#293957),#94896); +#293957 = PRESENTATION_STYLE_ASSIGNMENT((#293958)); +#293958 = SURFACE_STYLE_USAGE(.BOTH.,#293959); +#293959 = SURFACE_SIDE_STYLE('',(#293960)); +#293960 = SURFACE_STYLE_FILL_AREA(#293961); +#293961 = FILL_AREA_STYLE('',(#293962)); +#293962 = FILL_AREA_STYLE_COLOUR('',#282540); +#293963 = STYLED_ITEM('color',(#293964),#94908); +#293964 = PRESENTATION_STYLE_ASSIGNMENT((#293965)); +#293965 = SURFACE_STYLE_USAGE(.BOTH.,#293966); +#293966 = SURFACE_SIDE_STYLE('',(#293967)); +#293967 = SURFACE_STYLE_FILL_AREA(#293968); +#293968 = FILL_AREA_STYLE('',(#293969)); +#293969 = FILL_AREA_STYLE_COLOUR('',#282540); +#293970 = STYLED_ITEM('color',(#293971),#94925); +#293971 = PRESENTATION_STYLE_ASSIGNMENT((#293972)); +#293972 = SURFACE_STYLE_USAGE(.BOTH.,#293973); +#293973 = SURFACE_SIDE_STYLE('',(#293974)); +#293974 = SURFACE_STYLE_FILL_AREA(#293975); +#293975 = FILL_AREA_STYLE('',(#293976)); +#293976 = FILL_AREA_STYLE_COLOUR('',#282540); +#293977 = STYLED_ITEM('color',(#293978),#94937); +#293978 = PRESENTATION_STYLE_ASSIGNMENT((#293979)); +#293979 = SURFACE_STYLE_USAGE(.BOTH.,#293980); +#293980 = SURFACE_SIDE_STYLE('',(#293981)); +#293981 = SURFACE_STYLE_FILL_AREA(#293982); +#293982 = FILL_AREA_STYLE('',(#293983)); +#293983 = FILL_AREA_STYLE_COLOUR('',#282540); +#293984 = STYLED_ITEM('color',(#293985),#94954); +#293985 = PRESENTATION_STYLE_ASSIGNMENT((#293986)); +#293986 = SURFACE_STYLE_USAGE(.BOTH.,#293987); +#293987 = SURFACE_SIDE_STYLE('',(#293988)); +#293988 = SURFACE_STYLE_FILL_AREA(#293989); +#293989 = FILL_AREA_STYLE('',(#293990)); +#293990 = FILL_AREA_STYLE_COLOUR('',#282540); +#293991 = STYLED_ITEM('color',(#293992),#94971); +#293992 = PRESENTATION_STYLE_ASSIGNMENT((#293993)); +#293993 = SURFACE_STYLE_USAGE(.BOTH.,#293994); +#293994 = SURFACE_SIDE_STYLE('',(#293995)); +#293995 = SURFACE_STYLE_FILL_AREA(#293996); +#293996 = FILL_AREA_STYLE('',(#293997)); +#293997 = FILL_AREA_STYLE_COLOUR('',#282540); +#293998 = STYLED_ITEM('color',(#293999),#94988); +#293999 = PRESENTATION_STYLE_ASSIGNMENT((#294000)); +#294000 = SURFACE_STYLE_USAGE(.BOTH.,#294001); +#294001 = SURFACE_SIDE_STYLE('',(#294002)); +#294002 = SURFACE_STYLE_FILL_AREA(#294003); +#294003 = FILL_AREA_STYLE('',(#294004)); +#294004 = FILL_AREA_STYLE_COLOUR('',#282540); +#294005 = STYLED_ITEM('color',(#294006),#95005); +#294006 = PRESENTATION_STYLE_ASSIGNMENT((#294007)); +#294007 = SURFACE_STYLE_USAGE(.BOTH.,#294008); +#294008 = SURFACE_SIDE_STYLE('',(#294009)); +#294009 = SURFACE_STYLE_FILL_AREA(#294010); +#294010 = FILL_AREA_STYLE('',(#294011)); +#294011 = FILL_AREA_STYLE_COLOUR('',#282540); +#294012 = STYLED_ITEM('color',(#294013),#95022); +#294013 = PRESENTATION_STYLE_ASSIGNMENT((#294014)); +#294014 = SURFACE_STYLE_USAGE(.BOTH.,#294015); +#294015 = SURFACE_SIDE_STYLE('',(#294016)); +#294016 = SURFACE_STYLE_FILL_AREA(#294017); +#294017 = FILL_AREA_STYLE('',(#294018)); +#294018 = FILL_AREA_STYLE_COLOUR('',#282540); +#294019 = STYLED_ITEM('color',(#294020),#95039); +#294020 = PRESENTATION_STYLE_ASSIGNMENT((#294021)); +#294021 = SURFACE_STYLE_USAGE(.BOTH.,#294022); +#294022 = SURFACE_SIDE_STYLE('',(#294023)); +#294023 = SURFACE_STYLE_FILL_AREA(#294024); +#294024 = FILL_AREA_STYLE('',(#294025)); +#294025 = FILL_AREA_STYLE_COLOUR('',#282540); +#294026 = STYLED_ITEM('color',(#294027),#95056); +#294027 = PRESENTATION_STYLE_ASSIGNMENT((#294028)); +#294028 = SURFACE_STYLE_USAGE(.BOTH.,#294029); +#294029 = SURFACE_SIDE_STYLE('',(#294030)); +#294030 = SURFACE_STYLE_FILL_AREA(#294031); +#294031 = FILL_AREA_STYLE('',(#294032)); +#294032 = FILL_AREA_STYLE_COLOUR('',#282540); +#294033 = STYLED_ITEM('color',(#294034),#95073); +#294034 = PRESENTATION_STYLE_ASSIGNMENT((#294035)); +#294035 = SURFACE_STYLE_USAGE(.BOTH.,#294036); +#294036 = SURFACE_SIDE_STYLE('',(#294037)); +#294037 = SURFACE_STYLE_FILL_AREA(#294038); +#294038 = FILL_AREA_STYLE('',(#294039)); +#294039 = FILL_AREA_STYLE_COLOUR('',#282540); +#294040 = STYLED_ITEM('color',(#294041),#95085); +#294041 = PRESENTATION_STYLE_ASSIGNMENT((#294042)); +#294042 = SURFACE_STYLE_USAGE(.BOTH.,#294043); +#294043 = SURFACE_SIDE_STYLE('',(#294044)); +#294044 = SURFACE_STYLE_FILL_AREA(#294045); +#294045 = FILL_AREA_STYLE('',(#294046)); +#294046 = FILL_AREA_STYLE_COLOUR('',#282540); +#294047 = STYLED_ITEM('color',(#294048),#95102); +#294048 = PRESENTATION_STYLE_ASSIGNMENT((#294049)); +#294049 = SURFACE_STYLE_USAGE(.BOTH.,#294050); +#294050 = SURFACE_SIDE_STYLE('',(#294051)); +#294051 = SURFACE_STYLE_FILL_AREA(#294052); +#294052 = FILL_AREA_STYLE('',(#294053)); +#294053 = FILL_AREA_STYLE_COLOUR('',#282540); +#294054 = STYLED_ITEM('color',(#294055),#95114); +#294055 = PRESENTATION_STYLE_ASSIGNMENT((#294056)); +#294056 = SURFACE_STYLE_USAGE(.BOTH.,#294057); +#294057 = SURFACE_SIDE_STYLE('',(#294058)); +#294058 = SURFACE_STYLE_FILL_AREA(#294059); +#294059 = FILL_AREA_STYLE('',(#294060)); +#294060 = FILL_AREA_STYLE_COLOUR('',#282540); +#294061 = STYLED_ITEM('color',(#294062),#95131); +#294062 = PRESENTATION_STYLE_ASSIGNMENT((#294063)); +#294063 = SURFACE_STYLE_USAGE(.BOTH.,#294064); +#294064 = SURFACE_SIDE_STYLE('',(#294065)); +#294065 = SURFACE_STYLE_FILL_AREA(#294066); +#294066 = FILL_AREA_STYLE('',(#294067)); +#294067 = FILL_AREA_STYLE_COLOUR('',#282540); +#294068 = STYLED_ITEM('color',(#294069),#95143); +#294069 = PRESENTATION_STYLE_ASSIGNMENT((#294070)); +#294070 = SURFACE_STYLE_USAGE(.BOTH.,#294071); +#294071 = SURFACE_SIDE_STYLE('',(#294072)); +#294072 = SURFACE_STYLE_FILL_AREA(#294073); +#294073 = FILL_AREA_STYLE('',(#294074)); +#294074 = FILL_AREA_STYLE_COLOUR('',#282540); +#294075 = STYLED_ITEM('color',(#294076),#95160); +#294076 = PRESENTATION_STYLE_ASSIGNMENT((#294077)); +#294077 = SURFACE_STYLE_USAGE(.BOTH.,#294078); +#294078 = SURFACE_SIDE_STYLE('',(#294079)); +#294079 = SURFACE_STYLE_FILL_AREA(#294080); +#294080 = FILL_AREA_STYLE('',(#294081)); +#294081 = FILL_AREA_STYLE_COLOUR('',#282540); +#294082 = STYLED_ITEM('color',(#294083),#95172); +#294083 = PRESENTATION_STYLE_ASSIGNMENT((#294084)); +#294084 = SURFACE_STYLE_USAGE(.BOTH.,#294085); +#294085 = SURFACE_SIDE_STYLE('',(#294086)); +#294086 = SURFACE_STYLE_FILL_AREA(#294087); +#294087 = FILL_AREA_STYLE('',(#294088)); +#294088 = FILL_AREA_STYLE_COLOUR('',#282540); +#294089 = STYLED_ITEM('color',(#294090),#95189); +#294090 = PRESENTATION_STYLE_ASSIGNMENT((#294091)); +#294091 = SURFACE_STYLE_USAGE(.BOTH.,#294092); +#294092 = SURFACE_SIDE_STYLE('',(#294093)); +#294093 = SURFACE_STYLE_FILL_AREA(#294094); +#294094 = FILL_AREA_STYLE('',(#294095)); +#294095 = FILL_AREA_STYLE_COLOUR('',#282540); +#294096 = STYLED_ITEM('color',(#294097),#95206); +#294097 = PRESENTATION_STYLE_ASSIGNMENT((#294098)); +#294098 = SURFACE_STYLE_USAGE(.BOTH.,#294099); +#294099 = SURFACE_SIDE_STYLE('',(#294100)); +#294100 = SURFACE_STYLE_FILL_AREA(#294101); +#294101 = FILL_AREA_STYLE('',(#294102)); +#294102 = FILL_AREA_STYLE_COLOUR('',#282540); +#294103 = STYLED_ITEM('color',(#294104),#95223); +#294104 = PRESENTATION_STYLE_ASSIGNMENT((#294105)); +#294105 = SURFACE_STYLE_USAGE(.BOTH.,#294106); +#294106 = SURFACE_SIDE_STYLE('',(#294107)); +#294107 = SURFACE_STYLE_FILL_AREA(#294108); +#294108 = FILL_AREA_STYLE('',(#294109)); +#294109 = FILL_AREA_STYLE_COLOUR('',#282540); +#294110 = STYLED_ITEM('color',(#294111),#95240); +#294111 = PRESENTATION_STYLE_ASSIGNMENT((#294112)); +#294112 = SURFACE_STYLE_USAGE(.BOTH.,#294113); +#294113 = SURFACE_SIDE_STYLE('',(#294114)); +#294114 = SURFACE_STYLE_FILL_AREA(#294115); +#294115 = FILL_AREA_STYLE('',(#294116)); +#294116 = FILL_AREA_STYLE_COLOUR('',#282540); +#294117 = STYLED_ITEM('color',(#294118),#95257); +#294118 = PRESENTATION_STYLE_ASSIGNMENT((#294119)); +#294119 = SURFACE_STYLE_USAGE(.BOTH.,#294120); +#294120 = SURFACE_SIDE_STYLE('',(#294121)); +#294121 = SURFACE_STYLE_FILL_AREA(#294122); +#294122 = FILL_AREA_STYLE('',(#294123)); +#294123 = FILL_AREA_STYLE_COLOUR('',#282540); +#294124 = STYLED_ITEM('color',(#294125),#95274); +#294125 = PRESENTATION_STYLE_ASSIGNMENT((#294126)); +#294126 = SURFACE_STYLE_USAGE(.BOTH.,#294127); +#294127 = SURFACE_SIDE_STYLE('',(#294128)); +#294128 = SURFACE_STYLE_FILL_AREA(#294129); +#294129 = FILL_AREA_STYLE('',(#294130)); +#294130 = FILL_AREA_STYLE_COLOUR('',#282540); +#294131 = STYLED_ITEM('color',(#294132),#95286); +#294132 = PRESENTATION_STYLE_ASSIGNMENT((#294133)); +#294133 = SURFACE_STYLE_USAGE(.BOTH.,#294134); +#294134 = SURFACE_SIDE_STYLE('',(#294135)); +#294135 = SURFACE_STYLE_FILL_AREA(#294136); +#294136 = FILL_AREA_STYLE('',(#294137)); +#294137 = FILL_AREA_STYLE_COLOUR('',#282540); +#294138 = STYLED_ITEM('color',(#294139),#95303); +#294139 = PRESENTATION_STYLE_ASSIGNMENT((#294140)); +#294140 = SURFACE_STYLE_USAGE(.BOTH.,#294141); +#294141 = SURFACE_SIDE_STYLE('',(#294142)); +#294142 = SURFACE_STYLE_FILL_AREA(#294143); +#294143 = FILL_AREA_STYLE('',(#294144)); +#294144 = FILL_AREA_STYLE_COLOUR('',#282540); +#294145 = STYLED_ITEM('color',(#294146),#95315); +#294146 = PRESENTATION_STYLE_ASSIGNMENT((#294147)); +#294147 = SURFACE_STYLE_USAGE(.BOTH.,#294148); +#294148 = SURFACE_SIDE_STYLE('',(#294149)); +#294149 = SURFACE_STYLE_FILL_AREA(#294150); +#294150 = FILL_AREA_STYLE('',(#294151)); +#294151 = FILL_AREA_STYLE_COLOUR('',#282540); +#294152 = STYLED_ITEM('color',(#294153),#95332); +#294153 = PRESENTATION_STYLE_ASSIGNMENT((#294154)); +#294154 = SURFACE_STYLE_USAGE(.BOTH.,#294155); +#294155 = SURFACE_SIDE_STYLE('',(#294156)); +#294156 = SURFACE_STYLE_FILL_AREA(#294157); +#294157 = FILL_AREA_STYLE('',(#294158)); +#294158 = FILL_AREA_STYLE_COLOUR('',#282540); +#294159 = STYLED_ITEM('color',(#294160),#95344); +#294160 = PRESENTATION_STYLE_ASSIGNMENT((#294161)); +#294161 = SURFACE_STYLE_USAGE(.BOTH.,#294162); +#294162 = SURFACE_SIDE_STYLE('',(#294163)); +#294163 = SURFACE_STYLE_FILL_AREA(#294164); +#294164 = FILL_AREA_STYLE('',(#294165)); +#294165 = FILL_AREA_STYLE_COLOUR('',#282540); +#294166 = STYLED_ITEM('color',(#294167),#95361); +#294167 = PRESENTATION_STYLE_ASSIGNMENT((#294168)); +#294168 = SURFACE_STYLE_USAGE(.BOTH.,#294169); +#294169 = SURFACE_SIDE_STYLE('',(#294170)); +#294170 = SURFACE_STYLE_FILL_AREA(#294171); +#294171 = FILL_AREA_STYLE('',(#294172)); +#294172 = FILL_AREA_STYLE_COLOUR('',#282540); +#294173 = STYLED_ITEM('color',(#294174),#95373); +#294174 = PRESENTATION_STYLE_ASSIGNMENT((#294175)); +#294175 = SURFACE_STYLE_USAGE(.BOTH.,#294176); +#294176 = SURFACE_SIDE_STYLE('',(#294177)); +#294177 = SURFACE_STYLE_FILL_AREA(#294178); +#294178 = FILL_AREA_STYLE('',(#294179)); +#294179 = FILL_AREA_STYLE_COLOUR('',#282540); +#294180 = STYLED_ITEM('color',(#294181),#95390); +#294181 = PRESENTATION_STYLE_ASSIGNMENT((#294182)); +#294182 = SURFACE_STYLE_USAGE(.BOTH.,#294183); +#294183 = SURFACE_SIDE_STYLE('',(#294184)); +#294184 = SURFACE_STYLE_FILL_AREA(#294185); +#294185 = FILL_AREA_STYLE('',(#294186)); +#294186 = FILL_AREA_STYLE_COLOUR('',#282540); +#294187 = STYLED_ITEM('color',(#294188),#95402); +#294188 = PRESENTATION_STYLE_ASSIGNMENT((#294189)); +#294189 = SURFACE_STYLE_USAGE(.BOTH.,#294190); +#294190 = SURFACE_SIDE_STYLE('',(#294191)); +#294191 = SURFACE_STYLE_FILL_AREA(#294192); +#294192 = FILL_AREA_STYLE('',(#294193)); +#294193 = FILL_AREA_STYLE_COLOUR('',#282540); +#294194 = STYLED_ITEM('color',(#294195),#95419); +#294195 = PRESENTATION_STYLE_ASSIGNMENT((#294196)); +#294196 = SURFACE_STYLE_USAGE(.BOTH.,#294197); +#294197 = SURFACE_SIDE_STYLE('',(#294198)); +#294198 = SURFACE_STYLE_FILL_AREA(#294199); +#294199 = FILL_AREA_STYLE('',(#294200)); +#294200 = FILL_AREA_STYLE_COLOUR('',#282540); +#294201 = STYLED_ITEM('color',(#294202),#95431); +#294202 = PRESENTATION_STYLE_ASSIGNMENT((#294203)); +#294203 = SURFACE_STYLE_USAGE(.BOTH.,#294204); +#294204 = SURFACE_SIDE_STYLE('',(#294205)); +#294205 = SURFACE_STYLE_FILL_AREA(#294206); +#294206 = FILL_AREA_STYLE('',(#294207)); +#294207 = FILL_AREA_STYLE_COLOUR('',#282540); +#294208 = STYLED_ITEM('color',(#294209),#95448); +#294209 = PRESENTATION_STYLE_ASSIGNMENT((#294210)); +#294210 = SURFACE_STYLE_USAGE(.BOTH.,#294211); +#294211 = SURFACE_SIDE_STYLE('',(#294212)); +#294212 = SURFACE_STYLE_FILL_AREA(#294213); +#294213 = FILL_AREA_STYLE('',(#294214)); +#294214 = FILL_AREA_STYLE_COLOUR('',#282540); +#294215 = STYLED_ITEM('color',(#294216),#95460); +#294216 = PRESENTATION_STYLE_ASSIGNMENT((#294217)); +#294217 = SURFACE_STYLE_USAGE(.BOTH.,#294218); +#294218 = SURFACE_SIDE_STYLE('',(#294219)); +#294219 = SURFACE_STYLE_FILL_AREA(#294220); +#294220 = FILL_AREA_STYLE('',(#294221)); +#294221 = FILL_AREA_STYLE_COLOUR('',#282540); +#294222 = STYLED_ITEM('color',(#294223),#95477); +#294223 = PRESENTATION_STYLE_ASSIGNMENT((#294224)); +#294224 = SURFACE_STYLE_USAGE(.BOTH.,#294225); +#294225 = SURFACE_SIDE_STYLE('',(#294226)); +#294226 = SURFACE_STYLE_FILL_AREA(#294227); +#294227 = FILL_AREA_STYLE('',(#294228)); +#294228 = FILL_AREA_STYLE_COLOUR('',#282540); +#294229 = STYLED_ITEM('color',(#294230),#95489); +#294230 = PRESENTATION_STYLE_ASSIGNMENT((#294231)); +#294231 = SURFACE_STYLE_USAGE(.BOTH.,#294232); +#294232 = SURFACE_SIDE_STYLE('',(#294233)); +#294233 = SURFACE_STYLE_FILL_AREA(#294234); +#294234 = FILL_AREA_STYLE('',(#294235)); +#294235 = FILL_AREA_STYLE_COLOUR('',#282540); +#294236 = STYLED_ITEM('color',(#294237),#95506); +#294237 = PRESENTATION_STYLE_ASSIGNMENT((#294238)); +#294238 = SURFACE_STYLE_USAGE(.BOTH.,#294239); +#294239 = SURFACE_SIDE_STYLE('',(#294240)); +#294240 = SURFACE_STYLE_FILL_AREA(#294241); +#294241 = FILL_AREA_STYLE('',(#294242)); +#294242 = FILL_AREA_STYLE_COLOUR('',#282540); +#294243 = STYLED_ITEM('color',(#294244),#95518); +#294244 = PRESENTATION_STYLE_ASSIGNMENT((#294245)); +#294245 = SURFACE_STYLE_USAGE(.BOTH.,#294246); +#294246 = SURFACE_SIDE_STYLE('',(#294247)); +#294247 = SURFACE_STYLE_FILL_AREA(#294248); +#294248 = FILL_AREA_STYLE('',(#294249)); +#294249 = FILL_AREA_STYLE_COLOUR('',#282540); +#294250 = STYLED_ITEM('color',(#294251),#95535); +#294251 = PRESENTATION_STYLE_ASSIGNMENT((#294252)); +#294252 = SURFACE_STYLE_USAGE(.BOTH.,#294253); +#294253 = SURFACE_SIDE_STYLE('',(#294254)); +#294254 = SURFACE_STYLE_FILL_AREA(#294255); +#294255 = FILL_AREA_STYLE('',(#294256)); +#294256 = FILL_AREA_STYLE_COLOUR('',#282540); +#294257 = STYLED_ITEM('color',(#294258),#95547); +#294258 = PRESENTATION_STYLE_ASSIGNMENT((#294259)); +#294259 = SURFACE_STYLE_USAGE(.BOTH.,#294260); +#294260 = SURFACE_SIDE_STYLE('',(#294261)); +#294261 = SURFACE_STYLE_FILL_AREA(#294262); +#294262 = FILL_AREA_STYLE('',(#294263)); +#294263 = FILL_AREA_STYLE_COLOUR('',#282540); +#294264 = STYLED_ITEM('color',(#294265),#95560); +#294265 = PRESENTATION_STYLE_ASSIGNMENT((#294266)); +#294266 = SURFACE_STYLE_USAGE(.BOTH.,#294267); +#294267 = SURFACE_SIDE_STYLE('',(#294268)); +#294268 = SURFACE_STYLE_FILL_AREA(#294269); +#294269 = FILL_AREA_STYLE('',(#294270)); +#294270 = FILL_AREA_STYLE_COLOUR('',#282905); +#294271 = STYLED_ITEM('color',(#294272),#95585); +#294272 = PRESENTATION_STYLE_ASSIGNMENT((#294273)); +#294273 = SURFACE_STYLE_USAGE(.BOTH.,#294274); +#294274 = SURFACE_SIDE_STYLE('',(#294275)); +#294275 = SURFACE_STYLE_FILL_AREA(#294276); +#294276 = FILL_AREA_STYLE('',(#294277)); +#294277 = FILL_AREA_STYLE_COLOUR('',#282905); +#294278 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294279,#294286,#294293),#98289); +#294279 = STYLED_ITEM('color',(#294280),#96627); +#294280 = PRESENTATION_STYLE_ASSIGNMENT((#294281)); +#294281 = SURFACE_STYLE_USAGE(.BOTH.,#294282); +#294282 = SURFACE_SIDE_STYLE('',(#294283)); +#294283 = SURFACE_STYLE_FILL_AREA(#294284); +#294284 = FILL_AREA_STYLE('',(#294285)); +#294285 = FILL_AREA_STYLE_COLOUR('',#282540); +#294286 = STYLED_ITEM('color',(#294287),#97317); +#294287 = PRESENTATION_STYLE_ASSIGNMENT((#294288)); +#294288 = SURFACE_STYLE_USAGE(.BOTH.,#294289); +#294289 = SURFACE_SIDE_STYLE('',(#294290)); +#294290 = SURFACE_STYLE_FILL_AREA(#294291); +#294291 = FILL_AREA_STYLE('',(#294292)); +#294292 = FILL_AREA_STYLE_COLOUR('',#282540); +#294293 = STYLED_ITEM('color',(#294294),#97599); +#294294 = PRESENTATION_STYLE_ASSIGNMENT((#294295)); +#294295 = SURFACE_STYLE_USAGE(.BOTH.,#294296); +#294296 = SURFACE_SIDE_STYLE('',(#294297)); +#294297 = SURFACE_STYLE_FILL_AREA(#294298); +#294298 = FILL_AREA_STYLE('',(#294299)); +#294299 = FILL_AREA_STYLE_COLOUR('',#282540); +#294300 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294301),#96585); +#294301 = STYLED_ITEM('color',(#294302),#96097); +#294302 = PRESENTATION_STYLE_ASSIGNMENT((#294303)); +#294303 = SURFACE_STYLE_USAGE(.BOTH.,#294304); +#294304 = SURFACE_SIDE_STYLE('',(#294305)); +#294305 = SURFACE_STYLE_FILL_AREA(#294306); +#294306 = FILL_AREA_STYLE('',(#294307)); +#294307 = FILL_AREA_STYLE_COLOUR('',#282540); +#294308 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294309,#294318,#294327,#294336,#294345),#259282); +#294309 = STYLED_ITEM('color',(#294310),#257978); +#294310 = PRESENTATION_STYLE_ASSIGNMENT((#294311)); +#294311 = SURFACE_STYLE_USAGE(.BOTH.,#294312); +#294312 = SURFACE_SIDE_STYLE('',(#294313,#294316)); +#294313 = SURFACE_STYLE_FILL_AREA(#294314); +#294314 = FILL_AREA_STYLE('',(#294315)); +#294315 = FILL_AREA_STYLE_COLOUR('',#270350); +#294316 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#294317)); +#294317 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#294318 = STYLED_ITEM('color',(#294319),#258135); +#294319 = PRESENTATION_STYLE_ASSIGNMENT((#294320)); +#294320 = SURFACE_STYLE_USAGE(.BOTH.,#294321); +#294321 = SURFACE_SIDE_STYLE('',(#294322,#294325)); +#294322 = SURFACE_STYLE_FILL_AREA(#294323); +#294323 = FILL_AREA_STYLE('',(#294324)); +#294324 = FILL_AREA_STYLE_COLOUR('',#270350); +#294325 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#294326)); +#294326 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#294327 = STYLED_ITEM('color',(#294328),#258342); +#294328 = PRESENTATION_STYLE_ASSIGNMENT((#294329)); +#294329 = SURFACE_STYLE_USAGE(.BOTH.,#294330); +#294330 = SURFACE_SIDE_STYLE('',(#294331,#294334)); +#294331 = SURFACE_STYLE_FILL_AREA(#294332); +#294332 = FILL_AREA_STYLE('',(#294333)); +#294333 = FILL_AREA_STYLE_COLOUR('',#270350); +#294334 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#294335)); +#294335 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#294336 = STYLED_ITEM('color',(#294337),#258592); +#294337 = PRESENTATION_STYLE_ASSIGNMENT((#294338)); +#294338 = SURFACE_STYLE_USAGE(.BOTH.,#294339); +#294339 = SURFACE_SIDE_STYLE('',(#294340,#294343)); +#294340 = SURFACE_STYLE_FILL_AREA(#294341); +#294341 = FILL_AREA_STYLE('',(#294342)); +#294342 = FILL_AREA_STYLE_COLOUR('',#270350); +#294343 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#294344)); +#294344 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#294345 = STYLED_ITEM('color',(#294346),#258743); +#294346 = PRESENTATION_STYLE_ASSIGNMENT((#294347)); +#294347 = SURFACE_STYLE_USAGE(.BOTH.,#294348); +#294348 = SURFACE_SIDE_STYLE('',(#294349,#294352)); +#294349 = SURFACE_STYLE_FILL_AREA(#294350); +#294350 = FILL_AREA_STYLE('',(#294351)); +#294351 = FILL_AREA_STYLE_COLOUR('',#270350); +#294352 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #270350,(#294353)); +#294353 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#294354 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294355),#263440); +#294355 = STYLED_ITEM('color',(#294356),#261450); +#294356 = PRESENTATION_STYLE_ASSIGNMENT((#294357)); +#294357 = SURFACE_STYLE_USAGE(.BOTH.,#294358); +#294358 = SURFACE_SIDE_STYLE('',(#294359,#294363)); +#294359 = SURFACE_STYLE_FILL_AREA(#294360); +#294360 = FILL_AREA_STYLE('',(#294361)); +#294361 = FILL_AREA_STYLE_COLOUR('',#294362); +#294362 = COLOUR_RGB('',0.313304153717,0.484529207832,0.410020903123); +#294363 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #294362,(#294364)); +#294364 = SURFACE_STYLE_TRANSPARENT(0.170000016689); +#294365 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294366,#294373,#294380,#294387,#294394,#294401,#294408,#294415, + #294422,#294429,#294436,#294443,#294450,#294457,#294464,#294471, + #294478,#294485,#294492,#294499,#294506,#294513,#294520,#294527, + #294534,#294541,#294548,#294555,#294562,#294569,#294576,#294583, + #294590,#294597,#294604,#294611,#294618,#294625,#294632,#294639, + #294646),#53789); +#294366 = STYLED_ITEM('color',(#294367),#52583); +#294367 = PRESENTATION_STYLE_ASSIGNMENT((#294368)); +#294368 = SURFACE_STYLE_USAGE(.BOTH.,#294369); +#294369 = SURFACE_SIDE_STYLE('',(#294370)); +#294370 = SURFACE_STYLE_FILL_AREA(#294371); +#294371 = FILL_AREA_STYLE('',(#294372)); +#294372 = FILL_AREA_STYLE_COLOUR('',#282540); +#294373 = STYLED_ITEM('color',(#294374),#52623); +#294374 = PRESENTATION_STYLE_ASSIGNMENT((#294375)); +#294375 = SURFACE_STYLE_USAGE(.BOTH.,#294376); +#294376 = SURFACE_SIDE_STYLE('',(#294377)); +#294377 = SURFACE_STYLE_FILL_AREA(#294378); +#294378 = FILL_AREA_STYLE('',(#294379)); +#294379 = FILL_AREA_STYLE_COLOUR('',#282540); +#294380 = STYLED_ITEM('color',(#294381),#52706); +#294381 = PRESENTATION_STYLE_ASSIGNMENT((#294382)); +#294382 = SURFACE_STYLE_USAGE(.BOTH.,#294383); +#294383 = SURFACE_SIDE_STYLE('',(#294384)); +#294384 = SURFACE_STYLE_FILL_AREA(#294385); +#294385 = FILL_AREA_STYLE('',(#294386)); +#294386 = FILL_AREA_STYLE_COLOUR('',#282540); +#294387 = STYLED_ITEM('color',(#294388),#52731); +#294388 = PRESENTATION_STYLE_ASSIGNMENT((#294389)); +#294389 = SURFACE_STYLE_USAGE(.BOTH.,#294390); +#294390 = SURFACE_SIDE_STYLE('',(#294391)); +#294391 = SURFACE_STYLE_FILL_AREA(#294392); +#294392 = FILL_AREA_STYLE('',(#294393)); +#294393 = FILL_AREA_STYLE_COLOUR('',#282540); +#294394 = STYLED_ITEM('color',(#294395),#52806); +#294395 = PRESENTATION_STYLE_ASSIGNMENT((#294396)); +#294396 = SURFACE_STYLE_USAGE(.BOTH.,#294397); +#294397 = SURFACE_SIDE_STYLE('',(#294398)); +#294398 = SURFACE_STYLE_FILL_AREA(#294399); +#294399 = FILL_AREA_STYLE('',(#294400)); +#294400 = FILL_AREA_STYLE_COLOUR('',#282540); +#294401 = STYLED_ITEM('color',(#294402),#52823); +#294402 = PRESENTATION_STYLE_ASSIGNMENT((#294403)); +#294403 = SURFACE_STYLE_USAGE(.BOTH.,#294404); +#294404 = SURFACE_SIDE_STYLE('',(#294405)); +#294405 = SURFACE_STYLE_FILL_AREA(#294406); +#294406 = FILL_AREA_STYLE('',(#294407)); +#294407 = FILL_AREA_STYLE_COLOUR('',#282540); +#294408 = STYLED_ITEM('color',(#294409),#52840); +#294409 = PRESENTATION_STYLE_ASSIGNMENT((#294410)); +#294410 = SURFACE_STYLE_USAGE(.BOTH.,#294411); +#294411 = SURFACE_SIDE_STYLE('',(#294412)); +#294412 = SURFACE_STYLE_FILL_AREA(#294413); +#294413 = FILL_AREA_STYLE('',(#294414)); +#294414 = FILL_AREA_STYLE_COLOUR('',#282540); +#294415 = STYLED_ITEM('color',(#294416),#52857); +#294416 = PRESENTATION_STYLE_ASSIGNMENT((#294417)); +#294417 = SURFACE_STYLE_USAGE(.BOTH.,#294418); +#294418 = SURFACE_SIDE_STYLE('',(#294419)); +#294419 = SURFACE_STYLE_FILL_AREA(#294420); +#294420 = FILL_AREA_STYLE('',(#294421)); +#294421 = FILL_AREA_STYLE_COLOUR('',#282540); +#294422 = STYLED_ITEM('color',(#294423),#52874); +#294423 = PRESENTATION_STYLE_ASSIGNMENT((#294424)); +#294424 = SURFACE_STYLE_USAGE(.BOTH.,#294425); +#294425 = SURFACE_SIDE_STYLE('',(#294426)); +#294426 = SURFACE_STYLE_FILL_AREA(#294427); +#294427 = FILL_AREA_STYLE('',(#294428)); +#294428 = FILL_AREA_STYLE_COLOUR('',#282540); +#294429 = STYLED_ITEM('color',(#294430),#52891); +#294430 = PRESENTATION_STYLE_ASSIGNMENT((#294431)); +#294431 = SURFACE_STYLE_USAGE(.BOTH.,#294432); +#294432 = SURFACE_SIDE_STYLE('',(#294433)); +#294433 = SURFACE_STYLE_FILL_AREA(#294434); +#294434 = FILL_AREA_STYLE('',(#294435)); +#294435 = FILL_AREA_STYLE_COLOUR('',#282540); +#294436 = STYLED_ITEM('color',(#294437),#52907); +#294437 = PRESENTATION_STYLE_ASSIGNMENT((#294438)); +#294438 = SURFACE_STYLE_USAGE(.BOTH.,#294439); +#294439 = SURFACE_SIDE_STYLE('',(#294440)); +#294440 = SURFACE_STYLE_FILL_AREA(#294441); +#294441 = FILL_AREA_STYLE('',(#294442)); +#294442 = FILL_AREA_STYLE_COLOUR('',#279624); +#294443 = STYLED_ITEM('color',(#294444),#52954); +#294444 = PRESENTATION_STYLE_ASSIGNMENT((#294445)); +#294445 = SURFACE_STYLE_USAGE(.BOTH.,#294446); +#294446 = SURFACE_SIDE_STYLE('',(#294447)); +#294447 = SURFACE_STYLE_FILL_AREA(#294448); +#294448 = FILL_AREA_STYLE('',(#294449)); +#294449 = FILL_AREA_STYLE_COLOUR('',#279624); +#294450 = STYLED_ITEM('color',(#294451),#52989); +#294451 = PRESENTATION_STYLE_ASSIGNMENT((#294452)); +#294452 = SURFACE_STYLE_USAGE(.BOTH.,#294453); +#294453 = SURFACE_SIDE_STYLE('',(#294454)); +#294454 = SURFACE_STYLE_FILL_AREA(#294455); +#294455 = FILL_AREA_STYLE('',(#294456)); +#294456 = FILL_AREA_STYLE_COLOUR('',#279624); +#294457 = STYLED_ITEM('color',(#294458),#53028); +#294458 = PRESENTATION_STYLE_ASSIGNMENT((#294459)); +#294459 = SURFACE_STYLE_USAGE(.BOTH.,#294460); +#294460 = SURFACE_SIDE_STYLE('',(#294461)); +#294461 = SURFACE_STYLE_FILL_AREA(#294462); +#294462 = FILL_AREA_STYLE('',(#294463)); +#294463 = FILL_AREA_STYLE_COLOUR('',#279624); +#294464 = STYLED_ITEM('color',(#294465),#53057); +#294465 = PRESENTATION_STYLE_ASSIGNMENT((#294466)); +#294466 = SURFACE_STYLE_USAGE(.BOTH.,#294467); +#294467 = SURFACE_SIDE_STYLE('',(#294468)); +#294468 = SURFACE_STYLE_FILL_AREA(#294469); +#294469 = FILL_AREA_STYLE('',(#294470)); +#294470 = FILL_AREA_STYLE_COLOUR('',#279624); +#294471 = STYLED_ITEM('color',(#294472),#53096); +#294472 = PRESENTATION_STYLE_ASSIGNMENT((#294473)); +#294473 = SURFACE_STYLE_USAGE(.BOTH.,#294474); +#294474 = SURFACE_SIDE_STYLE('',(#294475)); +#294475 = SURFACE_STYLE_FILL_AREA(#294476); +#294476 = FILL_AREA_STYLE('',(#294477)); +#294477 = FILL_AREA_STYLE_COLOUR('',#279624); +#294478 = STYLED_ITEM('color',(#294479),#53125); +#294479 = PRESENTATION_STYLE_ASSIGNMENT((#294480)); +#294480 = SURFACE_STYLE_USAGE(.BOTH.,#294481); +#294481 = SURFACE_SIDE_STYLE('',(#294482)); +#294482 = SURFACE_STYLE_FILL_AREA(#294483); +#294483 = FILL_AREA_STYLE('',(#294484)); +#294484 = FILL_AREA_STYLE_COLOUR('',#279624); +#294485 = STYLED_ITEM('color',(#294486),#53179); +#294486 = PRESENTATION_STYLE_ASSIGNMENT((#294487)); +#294487 = SURFACE_STYLE_USAGE(.BOTH.,#294488); +#294488 = SURFACE_SIDE_STYLE('',(#294489)); +#294489 = SURFACE_STYLE_FILL_AREA(#294490); +#294490 = FILL_AREA_STYLE('',(#294491)); +#294491 = FILL_AREA_STYLE_COLOUR('',#279624); +#294492 = STYLED_ITEM('color',(#294493),#53222); +#294493 = PRESENTATION_STYLE_ASSIGNMENT((#294494)); +#294494 = SURFACE_STYLE_USAGE(.BOTH.,#294495); +#294495 = SURFACE_SIDE_STYLE('',(#294496)); +#294496 = SURFACE_STYLE_FILL_AREA(#294497); +#294497 = FILL_AREA_STYLE('',(#294498)); +#294498 = FILL_AREA_STYLE_COLOUR('',#279624); +#294499 = STYLED_ITEM('color',(#294500),#53245); +#294500 = PRESENTATION_STYLE_ASSIGNMENT((#294501)); +#294501 = SURFACE_STYLE_USAGE(.BOTH.,#294502); +#294502 = SURFACE_SIDE_STYLE('',(#294503)); +#294503 = SURFACE_STYLE_FILL_AREA(#294504); +#294504 = FILL_AREA_STYLE('',(#294505)); +#294505 = FILL_AREA_STYLE_COLOUR('',#279624); +#294506 = STYLED_ITEM('color',(#294507),#53268); +#294507 = PRESENTATION_STYLE_ASSIGNMENT((#294508)); +#294508 = SURFACE_STYLE_USAGE(.BOTH.,#294509); +#294509 = SURFACE_SIDE_STYLE('',(#294510)); +#294510 = SURFACE_STYLE_FILL_AREA(#294511); +#294511 = FILL_AREA_STYLE('',(#294512)); +#294512 = FILL_AREA_STYLE_COLOUR('',#279624); +#294513 = STYLED_ITEM('color',(#294514),#53291); +#294514 = PRESENTATION_STYLE_ASSIGNMENT((#294515)); +#294515 = SURFACE_STYLE_USAGE(.BOTH.,#294516); +#294516 = SURFACE_SIDE_STYLE('',(#294517)); +#294517 = SURFACE_STYLE_FILL_AREA(#294518); +#294518 = FILL_AREA_STYLE('',(#294519)); +#294519 = FILL_AREA_STYLE_COLOUR('',#279624); +#294520 = STYLED_ITEM('color',(#294521),#53342); +#294521 = PRESENTATION_STYLE_ASSIGNMENT((#294522)); +#294522 = SURFACE_STYLE_USAGE(.BOTH.,#294523); +#294523 = SURFACE_SIDE_STYLE('',(#294524)); +#294524 = SURFACE_STYLE_FILL_AREA(#294525); +#294525 = FILL_AREA_STYLE('',(#294526)); +#294526 = FILL_AREA_STYLE_COLOUR('',#279624); +#294527 = STYLED_ITEM('color',(#294528),#53365); +#294528 = PRESENTATION_STYLE_ASSIGNMENT((#294529)); +#294529 = SURFACE_STYLE_USAGE(.BOTH.,#294530); +#294530 = SURFACE_SIDE_STYLE('',(#294531)); +#294531 = SURFACE_STYLE_FILL_AREA(#294532); +#294532 = FILL_AREA_STYLE('',(#294533)); +#294533 = FILL_AREA_STYLE_COLOUR('',#279624); +#294534 = STYLED_ITEM('color',(#294535),#53382); +#294535 = PRESENTATION_STYLE_ASSIGNMENT((#294536)); +#294536 = SURFACE_STYLE_USAGE(.BOTH.,#294537); +#294537 = SURFACE_SIDE_STYLE('',(#294538)); +#294538 = SURFACE_STYLE_FILL_AREA(#294539); +#294539 = FILL_AREA_STYLE('',(#294540)); +#294540 = FILL_AREA_STYLE_COLOUR('',#282540); +#294541 = STYLED_ITEM('color',(#294542),#53456); +#294542 = PRESENTATION_STYLE_ASSIGNMENT((#294543)); +#294543 = SURFACE_STYLE_USAGE(.BOTH.,#294544); +#294544 = SURFACE_SIDE_STYLE('',(#294545)); +#294545 = SURFACE_STYLE_FILL_AREA(#294546); +#294546 = FILL_AREA_STYLE('',(#294547)); +#294547 = FILL_AREA_STYLE_COLOUR('',#282540); +#294548 = STYLED_ITEM('color',(#294549),#53480); +#294549 = PRESENTATION_STYLE_ASSIGNMENT((#294550)); +#294550 = SURFACE_STYLE_USAGE(.BOTH.,#294551); +#294551 = SURFACE_SIDE_STYLE('',(#294552)); +#294552 = SURFACE_STYLE_FILL_AREA(#294553); +#294553 = FILL_AREA_STYLE('',(#294554)); +#294554 = FILL_AREA_STYLE_COLOUR('',#282540); +#294555 = STYLED_ITEM('color',(#294556),#53547); +#294556 = PRESENTATION_STYLE_ASSIGNMENT((#294557)); +#294557 = SURFACE_STYLE_USAGE(.BOTH.,#294558); +#294558 = SURFACE_SIDE_STYLE('',(#294559)); +#294559 = SURFACE_STYLE_FILL_AREA(#294560); +#294560 = FILL_AREA_STYLE('',(#294561)); +#294561 = FILL_AREA_STYLE_COLOUR('',#279624); +#294562 = STYLED_ITEM('color',(#294563),#53559); +#294563 = PRESENTATION_STYLE_ASSIGNMENT((#294564)); +#294564 = SURFACE_STYLE_USAGE(.BOTH.,#294565); +#294565 = SURFACE_SIDE_STYLE('',(#294566)); +#294566 = SURFACE_STYLE_FILL_AREA(#294567); +#294567 = FILL_AREA_STYLE('',(#294568)); +#294568 = FILL_AREA_STYLE_COLOUR('',#279624); +#294569 = STYLED_ITEM('color',(#294570),#53571); +#294570 = PRESENTATION_STYLE_ASSIGNMENT((#294571)); +#294571 = SURFACE_STYLE_USAGE(.BOTH.,#294572); +#294572 = SURFACE_SIDE_STYLE('',(#294573)); +#294573 = SURFACE_STYLE_FILL_AREA(#294574); +#294574 = FILL_AREA_STYLE('',(#294575)); +#294575 = FILL_AREA_STYLE_COLOUR('',#282540); +#294576 = STYLED_ITEM('color',(#294577),#53588); +#294577 = PRESENTATION_STYLE_ASSIGNMENT((#294578)); +#294578 = SURFACE_STYLE_USAGE(.BOTH.,#294579); +#294579 = SURFACE_SIDE_STYLE('',(#294580)); +#294580 = SURFACE_STYLE_FILL_AREA(#294581); +#294581 = FILL_AREA_STYLE('',(#294582)); +#294582 = FILL_AREA_STYLE_COLOUR('',#282905); +#294583 = STYLED_ITEM('color',(#294584),#53617); +#294584 = PRESENTATION_STYLE_ASSIGNMENT((#294585)); +#294585 = SURFACE_STYLE_USAGE(.BOTH.,#294586); +#294586 = SURFACE_SIDE_STYLE('',(#294587)); +#294587 = SURFACE_STYLE_FILL_AREA(#294588); +#294588 = FILL_AREA_STYLE('',(#294589)); +#294589 = FILL_AREA_STYLE_COLOUR('',#282905); +#294590 = STYLED_ITEM('color',(#294591),#53640); +#294591 = PRESENTATION_STYLE_ASSIGNMENT((#294592)); +#294592 = SURFACE_STYLE_USAGE(.BOTH.,#294593); +#294593 = SURFACE_SIDE_STYLE('',(#294594)); +#294594 = SURFACE_STYLE_FILL_AREA(#294595); +#294595 = FILL_AREA_STYLE('',(#294596)); +#294596 = FILL_AREA_STYLE_COLOUR('',#282905); +#294597 = STYLED_ITEM('color',(#294598),#53663); +#294598 = PRESENTATION_STYLE_ASSIGNMENT((#294599)); +#294599 = SURFACE_STYLE_USAGE(.BOTH.,#294600); +#294600 = SURFACE_SIDE_STYLE('',(#294601)); +#294601 = SURFACE_STYLE_FILL_AREA(#294602); +#294602 = FILL_AREA_STYLE('',(#294603)); +#294603 = FILL_AREA_STYLE_COLOUR('',#282905); +#294604 = STYLED_ITEM('color',(#294605),#53680); +#294605 = PRESENTATION_STYLE_ASSIGNMENT((#294606)); +#294606 = SURFACE_STYLE_USAGE(.BOTH.,#294607); +#294607 = SURFACE_SIDE_STYLE('',(#294608)); +#294608 = SURFACE_STYLE_FILL_AREA(#294609); +#294609 = FILL_AREA_STYLE('',(#294610)); +#294610 = FILL_AREA_STYLE_COLOUR('',#282540); +#294611 = STYLED_ITEM('color',(#294612),#53702); +#294612 = PRESENTATION_STYLE_ASSIGNMENT((#294613)); +#294613 = SURFACE_STYLE_USAGE(.BOTH.,#294614); +#294614 = SURFACE_SIDE_STYLE('',(#294615)); +#294615 = SURFACE_STYLE_FILL_AREA(#294616); +#294616 = FILL_AREA_STYLE('',(#294617)); +#294617 = FILL_AREA_STYLE_COLOUR('',#282540); +#294618 = STYLED_ITEM('color',(#294619),#53714); +#294619 = PRESENTATION_STYLE_ASSIGNMENT((#294620)); +#294620 = SURFACE_STYLE_USAGE(.BOTH.,#294621); +#294621 = SURFACE_SIDE_STYLE('',(#294622)); +#294622 = SURFACE_STYLE_FILL_AREA(#294623); +#294623 = FILL_AREA_STYLE('',(#294624)); +#294624 = FILL_AREA_STYLE_COLOUR('',#282540); +#294625 = STYLED_ITEM('color',(#294626),#53731); +#294626 = PRESENTATION_STYLE_ASSIGNMENT((#294627)); +#294627 = SURFACE_STYLE_USAGE(.BOTH.,#294628); +#294628 = SURFACE_SIDE_STYLE('',(#294629)); +#294629 = SURFACE_STYLE_FILL_AREA(#294630); +#294630 = FILL_AREA_STYLE('',(#294631)); +#294631 = FILL_AREA_STYLE_COLOUR('',#282540); +#294632 = STYLED_ITEM('color',(#294633),#53748); +#294633 = PRESENTATION_STYLE_ASSIGNMENT((#294634)); +#294634 = SURFACE_STYLE_USAGE(.BOTH.,#294635); +#294635 = SURFACE_SIDE_STYLE('',(#294636)); +#294636 = SURFACE_STYLE_FILL_AREA(#294637); +#294637 = FILL_AREA_STYLE('',(#294638)); +#294638 = FILL_AREA_STYLE_COLOUR('',#282540); +#294639 = STYLED_ITEM('color',(#294640),#53765); +#294640 = PRESENTATION_STYLE_ASSIGNMENT((#294641)); +#294641 = SURFACE_STYLE_USAGE(.BOTH.,#294642); +#294642 = SURFACE_SIDE_STYLE('',(#294643)); +#294643 = SURFACE_STYLE_FILL_AREA(#294644); +#294644 = FILL_AREA_STYLE('',(#294645)); +#294645 = FILL_AREA_STYLE_COLOUR('',#282540); +#294646 = STYLED_ITEM('color',(#294647),#53777); +#294647 = PRESENTATION_STYLE_ASSIGNMENT((#294648)); +#294648 = SURFACE_STYLE_USAGE(.BOTH.,#294649); +#294649 = SURFACE_SIDE_STYLE('',(#294650)); +#294650 = SURFACE_STYLE_FILL_AREA(#294651); +#294651 = FILL_AREA_STYLE('',(#294652)); +#294652 = FILL_AREA_STYLE_COLOUR('',#282905); +#294653 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294654),#270331); +#294654 = STYLED_ITEM('color',(#294655),#263459); +#294655 = PRESENTATION_STYLE_ASSIGNMENT((#294656)); +#294656 = SURFACE_STYLE_USAGE(.BOTH.,#294657); +#294657 = SURFACE_SIDE_STYLE('',(#294658,#294662)); +#294658 = SURFACE_STYLE_FILL_AREA(#294659); +#294659 = FILL_AREA_STYLE('',(#294660)); +#294660 = FILL_AREA_STYLE_COLOUR('',#294661); +#294661 = COLOUR_RGB('',0.679975718802,0.701410709185,0.574871009914); +#294662 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #294661,(#294663)); +#294663 = SURFACE_STYLE_TRANSPARENT(1.999998092651E-02); +#294664 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294665,#294672,#294679,#294686,#294693,#294700,#294707,#294714, + #294721,#294728,#294735,#294743,#294750,#294757,#294764,#294771, + #294778,#294785,#294792,#294799,#294806,#294813,#294820,#294827, + #294834,#294841,#294848,#294855),#43578); +#294665 = STYLED_ITEM('color',(#294666),#42726); +#294666 = PRESENTATION_STYLE_ASSIGNMENT((#294667)); +#294667 = SURFACE_STYLE_USAGE(.BOTH.,#294668); +#294668 = SURFACE_SIDE_STYLE('',(#294669)); +#294669 = SURFACE_STYLE_FILL_AREA(#294670); +#294670 = FILL_AREA_STYLE('',(#294671)); +#294671 = FILL_AREA_STYLE_COLOUR('',#282540); +#294672 = STYLED_ITEM('color',(#294673),#42802); +#294673 = PRESENTATION_STYLE_ASSIGNMENT((#294674)); +#294674 = SURFACE_STYLE_USAGE(.BOTH.,#294675); +#294675 = SURFACE_SIDE_STYLE('',(#294676)); +#294676 = SURFACE_STYLE_FILL_AREA(#294677); +#294677 = FILL_AREA_STYLE('',(#294678)); +#294678 = FILL_AREA_STYLE_COLOUR('',#282540); +#294679 = STYLED_ITEM('color',(#294680),#42833); +#294680 = PRESENTATION_STYLE_ASSIGNMENT((#294681)); +#294681 = SURFACE_STYLE_USAGE(.BOTH.,#294682); +#294682 = SURFACE_SIDE_STYLE('',(#294683)); +#294683 = SURFACE_STYLE_FILL_AREA(#294684); +#294684 = FILL_AREA_STYLE('',(#294685)); +#294685 = FILL_AREA_STYLE_COLOUR('',#282540); +#294686 = STYLED_ITEM('color',(#294687),#42858); +#294687 = PRESENTATION_STYLE_ASSIGNMENT((#294688)); +#294688 = SURFACE_STYLE_USAGE(.BOTH.,#294689); +#294689 = SURFACE_SIDE_STYLE('',(#294690)); +#294690 = SURFACE_STYLE_FILL_AREA(#294691); +#294691 = FILL_AREA_STYLE('',(#294692)); +#294692 = FILL_AREA_STYLE_COLOUR('',#282540); +#294693 = STYLED_ITEM('color',(#294694),#42883); +#294694 = PRESENTATION_STYLE_ASSIGNMENT((#294695)); +#294695 = SURFACE_STYLE_USAGE(.BOTH.,#294696); +#294696 = SURFACE_SIDE_STYLE('',(#294697)); +#294697 = SURFACE_STYLE_FILL_AREA(#294698); +#294698 = FILL_AREA_STYLE('',(#294699)); +#294699 = FILL_AREA_STYLE_COLOUR('',#282540); +#294700 = STYLED_ITEM('color',(#294701),#42907); +#294701 = PRESENTATION_STYLE_ASSIGNMENT((#294702)); +#294702 = SURFACE_STYLE_USAGE(.BOTH.,#294703); +#294703 = SURFACE_SIDE_STYLE('',(#294704)); +#294704 = SURFACE_STYLE_FILL_AREA(#294705); +#294705 = FILL_AREA_STYLE('',(#294706)); +#294706 = FILL_AREA_STYLE_COLOUR('',#282540); +#294707 = STYLED_ITEM('color',(#294708),#42931); +#294708 = PRESENTATION_STYLE_ASSIGNMENT((#294709)); +#294709 = SURFACE_STYLE_USAGE(.BOTH.,#294710); +#294710 = SURFACE_SIDE_STYLE('',(#294711)); +#294711 = SURFACE_STYLE_FILL_AREA(#294712); +#294712 = FILL_AREA_STYLE('',(#294713)); +#294713 = FILL_AREA_STYLE_COLOUR('',#282540); +#294714 = STYLED_ITEM('color',(#294715),#42956); +#294715 = PRESENTATION_STYLE_ASSIGNMENT((#294716)); +#294716 = SURFACE_STYLE_USAGE(.BOTH.,#294717); +#294717 = SURFACE_SIDE_STYLE('',(#294718)); +#294718 = SURFACE_STYLE_FILL_AREA(#294719); +#294719 = FILL_AREA_STYLE('',(#294720)); +#294720 = FILL_AREA_STYLE_COLOUR('',#282540); +#294721 = STYLED_ITEM('color',(#294722),#42981); +#294722 = PRESENTATION_STYLE_ASSIGNMENT((#294723)); +#294723 = SURFACE_STYLE_USAGE(.BOTH.,#294724); +#294724 = SURFACE_SIDE_STYLE('',(#294725)); +#294725 = SURFACE_STYLE_FILL_AREA(#294726); +#294726 = FILL_AREA_STYLE('',(#294727)); +#294727 = FILL_AREA_STYLE_COLOUR('',#282540); +#294728 = STYLED_ITEM('color',(#294729),#42998); +#294729 = PRESENTATION_STYLE_ASSIGNMENT((#294730)); +#294730 = SURFACE_STYLE_USAGE(.BOTH.,#294731); +#294731 = SURFACE_SIDE_STYLE('',(#294732)); +#294732 = SURFACE_STYLE_FILL_AREA(#294733); +#294733 = FILL_AREA_STYLE('',(#294734)); +#294734 = FILL_AREA_STYLE_COLOUR('',#282540); +#294735 = STYLED_ITEM('color',(#294736),#43084); +#294736 = PRESENTATION_STYLE_ASSIGNMENT((#294737)); +#294737 = SURFACE_STYLE_USAGE(.BOTH.,#294738); +#294738 = SURFACE_SIDE_STYLE('',(#294739)); +#294739 = SURFACE_STYLE_FILL_AREA(#294740); +#294740 = FILL_AREA_STYLE('',(#294741)); +#294741 = FILL_AREA_STYLE_COLOUR('',#294742); +#294742 = COLOUR_RGB('',0.379000005575,0.270000008848,0.214999999939); +#294743 = STYLED_ITEM('color',(#294744),#43116); +#294744 = PRESENTATION_STYLE_ASSIGNMENT((#294745)); +#294745 = SURFACE_STYLE_USAGE(.BOTH.,#294746); +#294746 = SURFACE_SIDE_STYLE('',(#294747)); +#294747 = SURFACE_STYLE_FILL_AREA(#294748); +#294748 = FILL_AREA_STYLE('',(#294749)); +#294749 = FILL_AREA_STYLE_COLOUR('',#294742); +#294750 = STYLED_ITEM('color',(#294751),#43140); +#294751 = PRESENTATION_STYLE_ASSIGNMENT((#294752)); +#294752 = SURFACE_STYLE_USAGE(.BOTH.,#294753); +#294753 = SURFACE_SIDE_STYLE('',(#294754)); +#294754 = SURFACE_STYLE_FILL_AREA(#294755); +#294755 = FILL_AREA_STYLE('',(#294756)); +#294756 = FILL_AREA_STYLE_COLOUR('',#294742); +#294757 = STYLED_ITEM('color',(#294758),#43165); +#294758 = PRESENTATION_STYLE_ASSIGNMENT((#294759)); +#294759 = SURFACE_STYLE_USAGE(.BOTH.,#294760); +#294760 = SURFACE_SIDE_STYLE('',(#294761)); +#294761 = SURFACE_STYLE_FILL_AREA(#294762); +#294762 = FILL_AREA_STYLE('',(#294763)); +#294763 = FILL_AREA_STYLE_COLOUR('',#294742); +#294764 = STYLED_ITEM('color',(#294765),#43189); +#294765 = PRESENTATION_STYLE_ASSIGNMENT((#294766)); +#294766 = SURFACE_STYLE_USAGE(.BOTH.,#294767); +#294767 = SURFACE_SIDE_STYLE('',(#294768)); +#294768 = SURFACE_STYLE_FILL_AREA(#294769); +#294769 = FILL_AREA_STYLE('',(#294770)); +#294770 = FILL_AREA_STYLE_COLOUR('',#294742); +#294771 = STYLED_ITEM('color',(#294772),#43214); +#294772 = PRESENTATION_STYLE_ASSIGNMENT((#294773)); +#294773 = SURFACE_STYLE_USAGE(.BOTH.,#294774); +#294774 = SURFACE_SIDE_STYLE('',(#294775)); +#294775 = SURFACE_STYLE_FILL_AREA(#294776); +#294776 = FILL_AREA_STYLE('',(#294777)); +#294777 = FILL_AREA_STYLE_COLOUR('',#294742); +#294778 = STYLED_ITEM('color',(#294779),#43238); +#294779 = PRESENTATION_STYLE_ASSIGNMENT((#294780)); +#294780 = SURFACE_STYLE_USAGE(.BOTH.,#294781); +#294781 = SURFACE_SIDE_STYLE('',(#294782)); +#294782 = SURFACE_STYLE_FILL_AREA(#294783); +#294783 = FILL_AREA_STYLE('',(#294784)); +#294784 = FILL_AREA_STYLE_COLOUR('',#294742); +#294785 = STYLED_ITEM('color',(#294786),#43263); +#294786 = PRESENTATION_STYLE_ASSIGNMENT((#294787)); +#294787 = SURFACE_STYLE_USAGE(.BOTH.,#294788); +#294788 = SURFACE_SIDE_STYLE('',(#294789)); +#294789 = SURFACE_STYLE_FILL_AREA(#294790); +#294790 = FILL_AREA_STYLE('',(#294791)); +#294791 = FILL_AREA_STYLE_COLOUR('',#294742); +#294792 = STYLED_ITEM('color',(#294793),#43280); +#294793 = PRESENTATION_STYLE_ASSIGNMENT((#294794)); +#294794 = SURFACE_STYLE_USAGE(.BOTH.,#294795); +#294795 = SURFACE_SIDE_STYLE('',(#294796)); +#294796 = SURFACE_STYLE_FILL_AREA(#294797); +#294797 = FILL_AREA_STYLE('',(#294798)); +#294798 = FILL_AREA_STYLE_COLOUR('',#282540); +#294799 = STYLED_ITEM('color',(#294800),#43366); +#294800 = PRESENTATION_STYLE_ASSIGNMENT((#294801)); +#294801 = SURFACE_STYLE_USAGE(.BOTH.,#294802); +#294802 = SURFACE_SIDE_STYLE('',(#294803)); +#294803 = SURFACE_STYLE_FILL_AREA(#294804); +#294804 = FILL_AREA_STYLE('',(#294805)); +#294805 = FILL_AREA_STYLE_COLOUR('',#282540); +#294806 = STYLED_ITEM('color',(#294807),#43397); +#294807 = PRESENTATION_STYLE_ASSIGNMENT((#294808)); +#294808 = SURFACE_STYLE_USAGE(.BOTH.,#294809); +#294809 = SURFACE_SIDE_STYLE('',(#294810)); +#294810 = SURFACE_STYLE_FILL_AREA(#294811); +#294811 = FILL_AREA_STYLE('',(#294812)); +#294812 = FILL_AREA_STYLE_COLOUR('',#282540); +#294813 = STYLED_ITEM('color',(#294814),#43422); +#294814 = PRESENTATION_STYLE_ASSIGNMENT((#294815)); +#294815 = SURFACE_STYLE_USAGE(.BOTH.,#294816); +#294816 = SURFACE_SIDE_STYLE('',(#294817)); +#294817 = SURFACE_STYLE_FILL_AREA(#294818); +#294818 = FILL_AREA_STYLE('',(#294819)); +#294819 = FILL_AREA_STYLE_COLOUR('',#282540); +#294820 = STYLED_ITEM('color',(#294821),#43447); +#294821 = PRESENTATION_STYLE_ASSIGNMENT((#294822)); +#294822 = SURFACE_STYLE_USAGE(.BOTH.,#294823); +#294823 = SURFACE_SIDE_STYLE('',(#294824)); +#294824 = SURFACE_STYLE_FILL_AREA(#294825); +#294825 = FILL_AREA_STYLE('',(#294826)); +#294826 = FILL_AREA_STYLE_COLOUR('',#282540); +#294827 = STYLED_ITEM('color',(#294828),#43471); +#294828 = PRESENTATION_STYLE_ASSIGNMENT((#294829)); +#294829 = SURFACE_STYLE_USAGE(.BOTH.,#294830); +#294830 = SURFACE_SIDE_STYLE('',(#294831)); +#294831 = SURFACE_STYLE_FILL_AREA(#294832); +#294832 = FILL_AREA_STYLE('',(#294833)); +#294833 = FILL_AREA_STYLE_COLOUR('',#282540); +#294834 = STYLED_ITEM('color',(#294835),#43495); +#294835 = PRESENTATION_STYLE_ASSIGNMENT((#294836)); +#294836 = SURFACE_STYLE_USAGE(.BOTH.,#294837); +#294837 = SURFACE_SIDE_STYLE('',(#294838)); +#294838 = SURFACE_STYLE_FILL_AREA(#294839); +#294839 = FILL_AREA_STYLE('',(#294840)); +#294840 = FILL_AREA_STYLE_COLOUR('',#282540); +#294841 = STYLED_ITEM('color',(#294842),#43520); +#294842 = PRESENTATION_STYLE_ASSIGNMENT((#294843)); +#294843 = SURFACE_STYLE_USAGE(.BOTH.,#294844); +#294844 = SURFACE_SIDE_STYLE('',(#294845)); +#294845 = SURFACE_STYLE_FILL_AREA(#294846); +#294846 = FILL_AREA_STYLE('',(#294847)); +#294847 = FILL_AREA_STYLE_COLOUR('',#282540); +#294848 = STYLED_ITEM('color',(#294849),#43545); +#294849 = PRESENTATION_STYLE_ASSIGNMENT((#294850)); +#294850 = SURFACE_STYLE_USAGE(.BOTH.,#294851); +#294851 = SURFACE_SIDE_STYLE('',(#294852)); +#294852 = SURFACE_STYLE_FILL_AREA(#294853); +#294853 = FILL_AREA_STYLE('',(#294854)); +#294854 = FILL_AREA_STYLE_COLOUR('',#282540); +#294855 = STYLED_ITEM('color',(#294856),#43562); +#294856 = PRESENTATION_STYLE_ASSIGNMENT((#294857)); +#294857 = SURFACE_STYLE_USAGE(.BOTH.,#294858); +#294858 = SURFACE_SIDE_STYLE('',(#294859)); +#294859 = SURFACE_STYLE_FILL_AREA(#294860); +#294860 = FILL_AREA_STYLE('',(#294861)); +#294861 = FILL_AREA_STYLE_COLOUR('',#282540); +#294862 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294863,#294870,#294877,#294884,#294891,#294898,#294905,#294912, + #294919,#294926,#294933,#294940,#294947,#294954,#294961,#294968, + #294975,#294982,#294989,#294996,#295003,#295010,#295017,#295024, + #295031,#295038,#295045,#295052,#295059,#295066,#295073,#295080, + #295087,#295094,#295101,#295108,#295115,#295122,#295129,#295136, + #295143,#295150,#295157,#295164,#295171,#295178,#295185,#295192, + #295199,#295206,#295213,#295220,#295227,#295234,#295241,#295248, + #295255,#295262,#295269,#295276,#295283,#295290,#295297,#295304, + #295311,#295318,#295325,#295332,#295339,#295346,#295353,#295360, + #295367,#295374,#295381,#295388,#295395,#295402,#295409,#295416, + #295423,#295430,#295437,#295444,#295451,#295458,#295465,#295472, + #295479,#295486,#295493,#295500,#295507,#295514,#295521,#295528, + #295535,#295542,#295549,#295556,#295563,#295570,#295577,#295584, + #295591),#101580); +#294863 = STYLED_ITEM('color',(#294864),#98353); +#294864 = PRESENTATION_STYLE_ASSIGNMENT((#294865)); +#294865 = SURFACE_STYLE_USAGE(.BOTH.,#294866); +#294866 = SURFACE_SIDE_STYLE('',(#294867)); +#294867 = SURFACE_STYLE_FILL_AREA(#294868); +#294868 = FILL_AREA_STYLE('',(#294869)); +#294869 = FILL_AREA_STYLE_COLOUR('',#279624); +#294870 = STYLED_ITEM('color',(#294871),#98370); +#294871 = PRESENTATION_STYLE_ASSIGNMENT((#294872)); +#294872 = SURFACE_STYLE_USAGE(.BOTH.,#294873); +#294873 = SURFACE_SIDE_STYLE('',(#294874)); +#294874 = SURFACE_STYLE_FILL_AREA(#294875); +#294875 = FILL_AREA_STYLE('',(#294876)); +#294876 = FILL_AREA_STYLE_COLOUR('',#279624); +#294877 = STYLED_ITEM('color',(#294878),#98395); +#294878 = PRESENTATION_STYLE_ASSIGNMENT((#294879)); +#294879 = SURFACE_STYLE_USAGE(.BOTH.,#294880); +#294880 = SURFACE_SIDE_STYLE('',(#294881)); +#294881 = SURFACE_STYLE_FILL_AREA(#294882); +#294882 = FILL_AREA_STYLE('',(#294883)); +#294883 = FILL_AREA_STYLE_COLOUR('',#282540); +#294884 = STYLED_ITEM('color',(#294885),#98518); +#294885 = PRESENTATION_STYLE_ASSIGNMENT((#294886)); +#294886 = SURFACE_STYLE_USAGE(.BOTH.,#294887); +#294887 = SURFACE_SIDE_STYLE('',(#294888)); +#294888 = SURFACE_STYLE_FILL_AREA(#294889); +#294889 = FILL_AREA_STYLE('',(#294890)); +#294890 = FILL_AREA_STYLE_COLOUR('',#282540); +#294891 = STYLED_ITEM('color',(#294892),#98549); +#294892 = PRESENTATION_STYLE_ASSIGNMENT((#294893)); +#294893 = SURFACE_STYLE_USAGE(.BOTH.,#294894); +#294894 = SURFACE_SIDE_STYLE('',(#294895)); +#294895 = SURFACE_STYLE_FILL_AREA(#294896); +#294896 = FILL_AREA_STYLE('',(#294897)); +#294897 = FILL_AREA_STYLE_COLOUR('',#282540); +#294898 = STYLED_ITEM('color',(#294899),#98574); +#294899 = PRESENTATION_STYLE_ASSIGNMENT((#294900)); +#294900 = SURFACE_STYLE_USAGE(.BOTH.,#294901); +#294901 = SURFACE_SIDE_STYLE('',(#294902)); +#294902 = SURFACE_STYLE_FILL_AREA(#294903); +#294903 = FILL_AREA_STYLE('',(#294904)); +#294904 = FILL_AREA_STYLE_COLOUR('',#282540); +#294905 = STYLED_ITEM('color',(#294906),#98599); +#294906 = PRESENTATION_STYLE_ASSIGNMENT((#294907)); +#294907 = SURFACE_STYLE_USAGE(.BOTH.,#294908); +#294908 = SURFACE_SIDE_STYLE('',(#294909)); +#294909 = SURFACE_STYLE_FILL_AREA(#294910); +#294910 = FILL_AREA_STYLE('',(#294911)); +#294911 = FILL_AREA_STYLE_COLOUR('',#282540); +#294912 = STYLED_ITEM('color',(#294913),#98623); +#294913 = PRESENTATION_STYLE_ASSIGNMENT((#294914)); +#294914 = SURFACE_STYLE_USAGE(.BOTH.,#294915); +#294915 = SURFACE_SIDE_STYLE('',(#294916)); +#294916 = SURFACE_STYLE_FILL_AREA(#294917); +#294917 = FILL_AREA_STYLE('',(#294918)); +#294918 = FILL_AREA_STYLE_COLOUR('',#282540); +#294919 = STYLED_ITEM('color',(#294920),#98647); +#294920 = PRESENTATION_STYLE_ASSIGNMENT((#294921)); +#294921 = SURFACE_STYLE_USAGE(.BOTH.,#294922); +#294922 = SURFACE_SIDE_STYLE('',(#294923)); +#294923 = SURFACE_STYLE_FILL_AREA(#294924); +#294924 = FILL_AREA_STYLE('',(#294925)); +#294925 = FILL_AREA_STYLE_COLOUR('',#282540); +#294926 = STYLED_ITEM('color',(#294927),#98672); +#294927 = PRESENTATION_STYLE_ASSIGNMENT((#294928)); +#294928 = SURFACE_STYLE_USAGE(.BOTH.,#294929); +#294929 = SURFACE_SIDE_STYLE('',(#294930)); +#294930 = SURFACE_STYLE_FILL_AREA(#294931); +#294931 = FILL_AREA_STYLE('',(#294932)); +#294932 = FILL_AREA_STYLE_COLOUR('',#282540); +#294933 = STYLED_ITEM('color',(#294934),#98697); +#294934 = PRESENTATION_STYLE_ASSIGNMENT((#294935)); +#294935 = SURFACE_STYLE_USAGE(.BOTH.,#294936); +#294936 = SURFACE_SIDE_STYLE('',(#294937)); +#294937 = SURFACE_STYLE_FILL_AREA(#294938); +#294938 = FILL_AREA_STYLE('',(#294939)); +#294939 = FILL_AREA_STYLE_COLOUR('',#282540); +#294940 = STYLED_ITEM('color',(#294941),#98714); +#294941 = PRESENTATION_STYLE_ASSIGNMENT((#294942)); +#294942 = SURFACE_STYLE_USAGE(.BOTH.,#294943); +#294943 = SURFACE_SIDE_STYLE('',(#294944)); +#294944 = SURFACE_STYLE_FILL_AREA(#294945); +#294945 = FILL_AREA_STYLE('',(#294946)); +#294946 = FILL_AREA_STYLE_COLOUR('',#279624); +#294947 = STYLED_ITEM('color',(#294948),#98739); +#294948 = PRESENTATION_STYLE_ASSIGNMENT((#294949)); +#294949 = SURFACE_STYLE_USAGE(.BOTH.,#294950); +#294950 = SURFACE_SIDE_STYLE('',(#294951)); +#294951 = SURFACE_STYLE_FILL_AREA(#294952); +#294952 = FILL_AREA_STYLE('',(#294953)); +#294953 = FILL_AREA_STYLE_COLOUR('',#279624); +#294954 = STYLED_ITEM('color',(#294955),#98764); +#294955 = PRESENTATION_STYLE_ASSIGNMENT((#294956)); +#294956 = SURFACE_STYLE_USAGE(.BOTH.,#294957); +#294957 = SURFACE_SIDE_STYLE('',(#294958)); +#294958 = SURFACE_STYLE_FILL_AREA(#294959); +#294959 = FILL_AREA_STYLE('',(#294960)); +#294960 = FILL_AREA_STYLE_COLOUR('',#279624); +#294961 = STYLED_ITEM('color',(#294962),#98789); +#294962 = PRESENTATION_STYLE_ASSIGNMENT((#294963)); +#294963 = SURFACE_STYLE_USAGE(.BOTH.,#294964); +#294964 = SURFACE_SIDE_STYLE('',(#294965)); +#294965 = SURFACE_STYLE_FILL_AREA(#294966); +#294966 = FILL_AREA_STYLE('',(#294967)); +#294967 = FILL_AREA_STYLE_COLOUR('',#279624); +#294968 = STYLED_ITEM('color',(#294969),#98814); +#294969 = PRESENTATION_STYLE_ASSIGNMENT((#294970)); +#294970 = SURFACE_STYLE_USAGE(.BOTH.,#294971); +#294971 = SURFACE_SIDE_STYLE('',(#294972)); +#294972 = SURFACE_STYLE_FILL_AREA(#294973); +#294973 = FILL_AREA_STYLE('',(#294974)); +#294974 = FILL_AREA_STYLE_COLOUR('',#279624); +#294975 = STYLED_ITEM('color',(#294976),#98845); +#294976 = PRESENTATION_STYLE_ASSIGNMENT((#294977)); +#294977 = SURFACE_STYLE_USAGE(.BOTH.,#294978); +#294978 = SURFACE_SIDE_STYLE('',(#294979)); +#294979 = SURFACE_STYLE_FILL_AREA(#294980); +#294980 = FILL_AREA_STYLE('',(#294981)); +#294981 = FILL_AREA_STYLE_COLOUR('',#279624); +#294982 = STYLED_ITEM('color',(#294983),#98870); +#294983 = PRESENTATION_STYLE_ASSIGNMENT((#294984)); +#294984 = SURFACE_STYLE_USAGE(.BOTH.,#294985); +#294985 = SURFACE_SIDE_STYLE('',(#294986)); +#294986 = SURFACE_STYLE_FILL_AREA(#294987); +#294987 = FILL_AREA_STYLE('',(#294988)); +#294988 = FILL_AREA_STYLE_COLOUR('',#279624); +#294989 = STYLED_ITEM('color',(#294990),#98895); +#294990 = PRESENTATION_STYLE_ASSIGNMENT((#294991)); +#294991 = SURFACE_STYLE_USAGE(.BOTH.,#294992); +#294992 = SURFACE_SIDE_STYLE('',(#294993)); +#294993 = SURFACE_STYLE_FILL_AREA(#294994); +#294994 = FILL_AREA_STYLE('',(#294995)); +#294995 = FILL_AREA_STYLE_COLOUR('',#279624); +#294996 = STYLED_ITEM('color',(#294997),#98983); +#294997 = PRESENTATION_STYLE_ASSIGNMENT((#294998)); +#294998 = SURFACE_STYLE_USAGE(.BOTH.,#294999); +#294999 = SURFACE_SIDE_STYLE('',(#295000)); +#295000 = SURFACE_STYLE_FILL_AREA(#295001); +#295001 = FILL_AREA_STYLE('',(#295002)); +#295002 = FILL_AREA_STYLE_COLOUR('',#279624); +#295003 = STYLED_ITEM('color',(#295004),#99071); +#295004 = PRESENTATION_STYLE_ASSIGNMENT((#295005)); +#295005 = SURFACE_STYLE_USAGE(.BOTH.,#295006); +#295006 = SURFACE_SIDE_STYLE('',(#295007)); +#295007 = SURFACE_STYLE_FILL_AREA(#295008); +#295008 = FILL_AREA_STYLE('',(#295009)); +#295009 = FILL_AREA_STYLE_COLOUR('',#279624); +#295010 = STYLED_ITEM('color',(#295011),#99096); +#295011 = PRESENTATION_STYLE_ASSIGNMENT((#295012)); +#295012 = SURFACE_STYLE_USAGE(.BOTH.,#295013); +#295013 = SURFACE_SIDE_STYLE('',(#295014)); +#295014 = SURFACE_STYLE_FILL_AREA(#295015); +#295015 = FILL_AREA_STYLE('',(#295016)); +#295016 = FILL_AREA_STYLE_COLOUR('',#279624); +#295017 = STYLED_ITEM('color',(#295018),#99121); +#295018 = PRESENTATION_STYLE_ASSIGNMENT((#295019)); +#295019 = SURFACE_STYLE_USAGE(.BOTH.,#295020); +#295020 = SURFACE_SIDE_STYLE('',(#295021)); +#295021 = SURFACE_STYLE_FILL_AREA(#295022); +#295022 = FILL_AREA_STYLE('',(#295023)); +#295023 = FILL_AREA_STYLE_COLOUR('',#279624); +#295024 = STYLED_ITEM('color',(#295025),#99138); +#295025 = PRESENTATION_STYLE_ASSIGNMENT((#295026)); +#295026 = SURFACE_STYLE_USAGE(.BOTH.,#295027); +#295027 = SURFACE_SIDE_STYLE('',(#295028)); +#295028 = SURFACE_STYLE_FILL_AREA(#295029); +#295029 = FILL_AREA_STYLE('',(#295030)); +#295030 = FILL_AREA_STYLE_COLOUR('',#279624); +#295031 = STYLED_ITEM('color',(#295032),#99147); +#295032 = PRESENTATION_STYLE_ASSIGNMENT((#295033)); +#295033 = SURFACE_STYLE_USAGE(.BOTH.,#295034); +#295034 = SURFACE_SIDE_STYLE('',(#295035)); +#295035 = SURFACE_STYLE_FILL_AREA(#295036); +#295036 = FILL_AREA_STYLE('',(#295037)); +#295037 = FILL_AREA_STYLE_COLOUR('',#279624); +#295038 = STYLED_ITEM('color',(#295039),#99173); +#295039 = PRESENTATION_STYLE_ASSIGNMENT((#295040)); +#295040 = SURFACE_STYLE_USAGE(.BOTH.,#295041); +#295041 = SURFACE_SIDE_STYLE('',(#295042)); +#295042 = SURFACE_STYLE_FILL_AREA(#295043); +#295043 = FILL_AREA_STYLE('',(#295044)); +#295044 = FILL_AREA_STYLE_COLOUR('',#279624); +#295045 = STYLED_ITEM('color',(#295046),#99182); +#295046 = PRESENTATION_STYLE_ASSIGNMENT((#295047)); +#295047 = SURFACE_STYLE_USAGE(.BOTH.,#295048); +#295048 = SURFACE_SIDE_STYLE('',(#295049)); +#295049 = SURFACE_STYLE_FILL_AREA(#295050); +#295050 = FILL_AREA_STYLE('',(#295051)); +#295051 = FILL_AREA_STYLE_COLOUR('',#279624); +#295052 = STYLED_ITEM('color',(#295053),#99191); +#295053 = PRESENTATION_STYLE_ASSIGNMENT((#295054)); +#295054 = SURFACE_STYLE_USAGE(.BOTH.,#295055); +#295055 = SURFACE_SIDE_STYLE('',(#295056)); +#295056 = SURFACE_STYLE_FILL_AREA(#295057); +#295057 = FILL_AREA_STYLE('',(#295058)); +#295058 = FILL_AREA_STYLE_COLOUR('',#279624); +#295059 = STYLED_ITEM('color',(#295060),#99235); +#295060 = PRESENTATION_STYLE_ASSIGNMENT((#295061)); +#295061 = SURFACE_STYLE_USAGE(.BOTH.,#295062); +#295062 = SURFACE_SIDE_STYLE('',(#295063)); +#295063 = SURFACE_STYLE_FILL_AREA(#295064); +#295064 = FILL_AREA_STYLE('',(#295065)); +#295065 = FILL_AREA_STYLE_COLOUR('',#282540); +#295066 = STYLED_ITEM('color',(#295067),#99385); +#295067 = PRESENTATION_STYLE_ASSIGNMENT((#295068)); +#295068 = SURFACE_STYLE_USAGE(.BOTH.,#295069); +#295069 = SURFACE_SIDE_STYLE('',(#295070)); +#295070 = SURFACE_STYLE_FILL_AREA(#295071); +#295071 = FILL_AREA_STYLE('',(#295072)); +#295072 = FILL_AREA_STYLE_COLOUR('',#282540); +#295073 = STYLED_ITEM('color',(#295074),#99409); +#295074 = PRESENTATION_STYLE_ASSIGNMENT((#295075)); +#295075 = SURFACE_STYLE_USAGE(.BOTH.,#295076); +#295076 = SURFACE_SIDE_STYLE('',(#295077)); +#295077 = SURFACE_STYLE_FILL_AREA(#295078); +#295078 = FILL_AREA_STYLE('',(#295079)); +#295079 = FILL_AREA_STYLE_COLOUR('',#282540); +#295080 = STYLED_ITEM('color',(#295081),#99552); +#295081 = PRESENTATION_STYLE_ASSIGNMENT((#295082)); +#295082 = SURFACE_STYLE_USAGE(.BOTH.,#295083); +#295083 = SURFACE_SIDE_STYLE('',(#295084)); +#295084 = SURFACE_STYLE_FILL_AREA(#295085); +#295085 = FILL_AREA_STYLE('',(#295086)); +#295086 = FILL_AREA_STYLE_COLOUR('',#282540); +#295087 = STYLED_ITEM('color',(#295088),#99702); +#295088 = PRESENTATION_STYLE_ASSIGNMENT((#295089)); +#295089 = SURFACE_STYLE_USAGE(.BOTH.,#295090); +#295090 = SURFACE_SIDE_STYLE('',(#295091)); +#295091 = SURFACE_STYLE_FILL_AREA(#295092); +#295092 = FILL_AREA_STYLE('',(#295093)); +#295093 = FILL_AREA_STYLE_COLOUR('',#282540); +#295094 = STYLED_ITEM('color',(#295095),#99852); +#295095 = PRESENTATION_STYLE_ASSIGNMENT((#295096)); +#295096 = SURFACE_STYLE_USAGE(.BOTH.,#295097); +#295097 = SURFACE_SIDE_STYLE('',(#295098)); +#295098 = SURFACE_STYLE_FILL_AREA(#295099); +#295099 = FILL_AREA_STYLE('',(#295100)); +#295100 = FILL_AREA_STYLE_COLOUR('',#282540); +#295101 = STYLED_ITEM('color',(#295102),#99869); +#295102 = PRESENTATION_STYLE_ASSIGNMENT((#295103)); +#295103 = SURFACE_STYLE_USAGE(.BOTH.,#295104); +#295104 = SURFACE_SIDE_STYLE('',(#295105)); +#295105 = SURFACE_STYLE_FILL_AREA(#295106); +#295106 = FILL_AREA_STYLE('',(#295107)); +#295107 = FILL_AREA_STYLE_COLOUR('',#282540); +#295108 = STYLED_ITEM('color',(#295109),#100019); +#295109 = PRESENTATION_STYLE_ASSIGNMENT((#295110)); +#295110 = SURFACE_STYLE_USAGE(.BOTH.,#295111); +#295111 = SURFACE_SIDE_STYLE('',(#295112)); +#295112 = SURFACE_STYLE_FILL_AREA(#295113); +#295113 = FILL_AREA_STYLE('',(#295114)); +#295114 = FILL_AREA_STYLE_COLOUR('',#282540); +#295115 = STYLED_ITEM('color',(#295116),#100043); +#295116 = PRESENTATION_STYLE_ASSIGNMENT((#295117)); +#295117 = SURFACE_STYLE_USAGE(.BOTH.,#295118); +#295118 = SURFACE_SIDE_STYLE('',(#295119)); +#295119 = SURFACE_STYLE_FILL_AREA(#295120); +#295120 = FILL_AREA_STYLE('',(#295121)); +#295121 = FILL_AREA_STYLE_COLOUR('',#282540); +#295122 = STYLED_ITEM('color',(#295123),#100186); +#295123 = PRESENTATION_STYLE_ASSIGNMENT((#295124)); +#295124 = SURFACE_STYLE_USAGE(.BOTH.,#295125); +#295125 = SURFACE_SIDE_STYLE('',(#295126)); +#295126 = SURFACE_STYLE_FILL_AREA(#295127); +#295127 = FILL_AREA_STYLE('',(#295128)); +#295128 = FILL_AREA_STYLE_COLOUR('',#282540); +#295129 = STYLED_ITEM('color',(#295130),#100336); +#295130 = PRESENTATION_STYLE_ASSIGNMENT((#295131)); +#295131 = SURFACE_STYLE_USAGE(.BOTH.,#295132); +#295132 = SURFACE_SIDE_STYLE('',(#295133)); +#295133 = SURFACE_STYLE_FILL_AREA(#295134); +#295134 = FILL_AREA_STYLE('',(#295135)); +#295135 = FILL_AREA_STYLE_COLOUR('',#282540); +#295136 = STYLED_ITEM('color',(#295137),#100486); +#295137 = PRESENTATION_STYLE_ASSIGNMENT((#295138)); +#295138 = SURFACE_STYLE_USAGE(.BOTH.,#295139); +#295139 = SURFACE_SIDE_STYLE('',(#295140)); +#295140 = SURFACE_STYLE_FILL_AREA(#295141); +#295141 = FILL_AREA_STYLE('',(#295142)); +#295142 = FILL_AREA_STYLE_COLOUR('',#282540); +#295143 = STYLED_ITEM('color',(#295144),#100503); +#295144 = PRESENTATION_STYLE_ASSIGNMENT((#295145)); +#295145 = SURFACE_STYLE_USAGE(.BOTH.,#295146); +#295146 = SURFACE_SIDE_STYLE('',(#295147)); +#295147 = SURFACE_STYLE_FILL_AREA(#295148); +#295148 = FILL_AREA_STYLE('',(#295149)); +#295149 = FILL_AREA_STYLE_COLOUR('',#279624); +#295150 = STYLED_ITEM('color',(#295151),#100512); +#295151 = PRESENTATION_STYLE_ASSIGNMENT((#295152)); +#295152 = SURFACE_STYLE_USAGE(.BOTH.,#295153); +#295153 = SURFACE_SIDE_STYLE('',(#295154)); +#295154 = SURFACE_STYLE_FILL_AREA(#295155); +#295155 = FILL_AREA_STYLE('',(#295156)); +#295156 = FILL_AREA_STYLE_COLOUR('',#282540); +#295157 = STYLED_ITEM('color',(#295158),#100529); +#295158 = PRESENTATION_STYLE_ASSIGNMENT((#295159)); +#295159 = SURFACE_STYLE_USAGE(.BOTH.,#295160); +#295160 = SURFACE_SIDE_STYLE('',(#295161)); +#295161 = SURFACE_STYLE_FILL_AREA(#295162); +#295162 = FILL_AREA_STYLE('',(#295163)); +#295163 = FILL_AREA_STYLE_COLOUR('',#282540); +#295164 = STYLED_ITEM('color',(#295165),#100546); +#295165 = PRESENTATION_STYLE_ASSIGNMENT((#295166)); +#295166 = SURFACE_STYLE_USAGE(.BOTH.,#295167); +#295167 = SURFACE_SIDE_STYLE('',(#295168)); +#295168 = SURFACE_STYLE_FILL_AREA(#295169); +#295169 = FILL_AREA_STYLE('',(#295170)); +#295170 = FILL_AREA_STYLE_COLOUR('',#282540); +#295171 = STYLED_ITEM('color',(#295172),#100563); +#295172 = PRESENTATION_STYLE_ASSIGNMENT((#295173)); +#295173 = SURFACE_STYLE_USAGE(.BOTH.,#295174); +#295174 = SURFACE_SIDE_STYLE('',(#295175)); +#295175 = SURFACE_STYLE_FILL_AREA(#295176); +#295176 = FILL_AREA_STYLE('',(#295177)); +#295177 = FILL_AREA_STYLE_COLOUR('',#282540); +#295178 = STYLED_ITEM('color',(#295179),#100580); +#295179 = PRESENTATION_STYLE_ASSIGNMENT((#295180)); +#295180 = SURFACE_STYLE_USAGE(.BOTH.,#295181); +#295181 = SURFACE_SIDE_STYLE('',(#295182)); +#295182 = SURFACE_STYLE_FILL_AREA(#295183); +#295183 = FILL_AREA_STYLE('',(#295184)); +#295184 = FILL_AREA_STYLE_COLOUR('',#282540); +#295185 = STYLED_ITEM('color',(#295186),#100602); +#295186 = PRESENTATION_STYLE_ASSIGNMENT((#295187)); +#295187 = SURFACE_STYLE_USAGE(.BOTH.,#295188); +#295188 = SURFACE_SIDE_STYLE('',(#295189)); +#295189 = SURFACE_STYLE_FILL_AREA(#295190); +#295190 = FILL_AREA_STYLE('',(#295191)); +#295191 = FILL_AREA_STYLE_COLOUR('',#282540); +#295192 = STYLED_ITEM('color',(#295193),#100619); +#295193 = PRESENTATION_STYLE_ASSIGNMENT((#295194)); +#295194 = SURFACE_STYLE_USAGE(.BOTH.,#295195); +#295195 = SURFACE_SIDE_STYLE('',(#295196)); +#295196 = SURFACE_STYLE_FILL_AREA(#295197); +#295197 = FILL_AREA_STYLE('',(#295198)); +#295198 = FILL_AREA_STYLE_COLOUR('',#282540); +#295199 = STYLED_ITEM('color',(#295200),#100636); +#295200 = PRESENTATION_STYLE_ASSIGNMENT((#295201)); +#295201 = SURFACE_STYLE_USAGE(.BOTH.,#295202); +#295202 = SURFACE_SIDE_STYLE('',(#295203)); +#295203 = SURFACE_STYLE_FILL_AREA(#295204); +#295204 = FILL_AREA_STYLE('',(#295205)); +#295205 = FILL_AREA_STYLE_COLOUR('',#282540); +#295206 = STYLED_ITEM('color',(#295207),#100653); +#295207 = PRESENTATION_STYLE_ASSIGNMENT((#295208)); +#295208 = SURFACE_STYLE_USAGE(.BOTH.,#295209); +#295209 = SURFACE_SIDE_STYLE('',(#295210)); +#295210 = SURFACE_STYLE_FILL_AREA(#295211); +#295211 = FILL_AREA_STYLE('',(#295212)); +#295212 = FILL_AREA_STYLE_COLOUR('',#282540); +#295213 = STYLED_ITEM('color',(#295214),#100670); +#295214 = PRESENTATION_STYLE_ASSIGNMENT((#295215)); +#295215 = SURFACE_STYLE_USAGE(.BOTH.,#295216); +#295216 = SURFACE_SIDE_STYLE('',(#295217)); +#295217 = SURFACE_STYLE_FILL_AREA(#295218); +#295218 = FILL_AREA_STYLE('',(#295219)); +#295219 = FILL_AREA_STYLE_COLOUR('',#282540); +#295220 = STYLED_ITEM('color',(#295221),#100682); +#295221 = PRESENTATION_STYLE_ASSIGNMENT((#295222)); +#295222 = SURFACE_STYLE_USAGE(.BOTH.,#295223); +#295223 = SURFACE_SIDE_STYLE('',(#295224)); +#295224 = SURFACE_STYLE_FILL_AREA(#295225); +#295225 = FILL_AREA_STYLE('',(#295226)); +#295226 = FILL_AREA_STYLE_COLOUR('',#282540); +#295227 = STYLED_ITEM('color',(#295228),#100699); +#295228 = PRESENTATION_STYLE_ASSIGNMENT((#295229)); +#295229 = SURFACE_STYLE_USAGE(.BOTH.,#295230); +#295230 = SURFACE_SIDE_STYLE('',(#295231)); +#295231 = SURFACE_STYLE_FILL_AREA(#295232); +#295232 = FILL_AREA_STYLE('',(#295233)); +#295233 = FILL_AREA_STYLE_COLOUR('',#282540); +#295234 = STYLED_ITEM('color',(#295235),#100716); +#295235 = PRESENTATION_STYLE_ASSIGNMENT((#295236)); +#295236 = SURFACE_STYLE_USAGE(.BOTH.,#295237); +#295237 = SURFACE_SIDE_STYLE('',(#295238)); +#295238 = SURFACE_STYLE_FILL_AREA(#295239); +#295239 = FILL_AREA_STYLE('',(#295240)); +#295240 = FILL_AREA_STYLE_COLOUR('',#282540); +#295241 = STYLED_ITEM('color',(#295242),#100733); +#295242 = PRESENTATION_STYLE_ASSIGNMENT((#295243)); +#295243 = SURFACE_STYLE_USAGE(.BOTH.,#295244); +#295244 = SURFACE_SIDE_STYLE('',(#295245)); +#295245 = SURFACE_STYLE_FILL_AREA(#295246); +#295246 = FILL_AREA_STYLE('',(#295247)); +#295247 = FILL_AREA_STYLE_COLOUR('',#282540); +#295248 = STYLED_ITEM('color',(#295249),#100750); +#295249 = PRESENTATION_STYLE_ASSIGNMENT((#295250)); +#295250 = SURFACE_STYLE_USAGE(.BOTH.,#295251); +#295251 = SURFACE_SIDE_STYLE('',(#295252)); +#295252 = SURFACE_STYLE_FILL_AREA(#295253); +#295253 = FILL_AREA_STYLE('',(#295254)); +#295254 = FILL_AREA_STYLE_COLOUR('',#282540); +#295255 = STYLED_ITEM('color',(#295256),#100767); +#295256 = PRESENTATION_STYLE_ASSIGNMENT((#295257)); +#295257 = SURFACE_STYLE_USAGE(.BOTH.,#295258); +#295258 = SURFACE_SIDE_STYLE('',(#295259)); +#295259 = SURFACE_STYLE_FILL_AREA(#295260); +#295260 = FILL_AREA_STYLE('',(#295261)); +#295261 = FILL_AREA_STYLE_COLOUR('',#282540); +#295262 = STYLED_ITEM('color',(#295263),#100784); +#295263 = PRESENTATION_STYLE_ASSIGNMENT((#295264)); +#295264 = SURFACE_STYLE_USAGE(.BOTH.,#295265); +#295265 = SURFACE_SIDE_STYLE('',(#295266)); +#295266 = SURFACE_STYLE_FILL_AREA(#295267); +#295267 = FILL_AREA_STYLE('',(#295268)); +#295268 = FILL_AREA_STYLE_COLOUR('',#282540); +#295269 = STYLED_ITEM('color',(#295270),#100801); +#295270 = PRESENTATION_STYLE_ASSIGNMENT((#295271)); +#295271 = SURFACE_STYLE_USAGE(.BOTH.,#295272); +#295272 = SURFACE_SIDE_STYLE('',(#295273)); +#295273 = SURFACE_STYLE_FILL_AREA(#295274); +#295274 = FILL_AREA_STYLE('',(#295275)); +#295275 = FILL_AREA_STYLE_COLOUR('',#282540); +#295276 = STYLED_ITEM('color',(#295277),#100818); +#295277 = PRESENTATION_STYLE_ASSIGNMENT((#295278)); +#295278 = SURFACE_STYLE_USAGE(.BOTH.,#295279); +#295279 = SURFACE_SIDE_STYLE('',(#295280)); +#295280 = SURFACE_STYLE_FILL_AREA(#295281); +#295281 = FILL_AREA_STYLE('',(#295282)); +#295282 = FILL_AREA_STYLE_COLOUR('',#282540); +#295283 = STYLED_ITEM('color',(#295284),#100830); +#295284 = PRESENTATION_STYLE_ASSIGNMENT((#295285)); +#295285 = SURFACE_STYLE_USAGE(.BOTH.,#295286); +#295286 = SURFACE_SIDE_STYLE('',(#295287)); +#295287 = SURFACE_STYLE_FILL_AREA(#295288); +#295288 = FILL_AREA_STYLE('',(#295289)); +#295289 = FILL_AREA_STYLE_COLOUR('',#282540); +#295290 = STYLED_ITEM('color',(#295291),#100852); +#295291 = PRESENTATION_STYLE_ASSIGNMENT((#295292)); +#295292 = SURFACE_STYLE_USAGE(.BOTH.,#295293); +#295293 = SURFACE_SIDE_STYLE('',(#295294)); +#295294 = SURFACE_STYLE_FILL_AREA(#295295); +#295295 = FILL_AREA_STYLE('',(#295296)); +#295296 = FILL_AREA_STYLE_COLOUR('',#282540); +#295297 = STYLED_ITEM('color',(#295298),#100869); +#295298 = PRESENTATION_STYLE_ASSIGNMENT((#295299)); +#295299 = SURFACE_STYLE_USAGE(.BOTH.,#295300); +#295300 = SURFACE_SIDE_STYLE('',(#295301)); +#295301 = SURFACE_STYLE_FILL_AREA(#295302); +#295302 = FILL_AREA_STYLE('',(#295303)); +#295303 = FILL_AREA_STYLE_COLOUR('',#282540); +#295304 = STYLED_ITEM('color',(#295305),#100886); +#295305 = PRESENTATION_STYLE_ASSIGNMENT((#295306)); +#295306 = SURFACE_STYLE_USAGE(.BOTH.,#295307); +#295307 = SURFACE_SIDE_STYLE('',(#295308)); +#295308 = SURFACE_STYLE_FILL_AREA(#295309); +#295309 = FILL_AREA_STYLE('',(#295310)); +#295310 = FILL_AREA_STYLE_COLOUR('',#282540); +#295311 = STYLED_ITEM('color',(#295312),#100903); +#295312 = PRESENTATION_STYLE_ASSIGNMENT((#295313)); +#295313 = SURFACE_STYLE_USAGE(.BOTH.,#295314); +#295314 = SURFACE_SIDE_STYLE('',(#295315)); +#295315 = SURFACE_STYLE_FILL_AREA(#295316); +#295316 = FILL_AREA_STYLE('',(#295317)); +#295317 = FILL_AREA_STYLE_COLOUR('',#282540); +#295318 = STYLED_ITEM('color',(#295319),#100920); +#295319 = PRESENTATION_STYLE_ASSIGNMENT((#295320)); +#295320 = SURFACE_STYLE_USAGE(.BOTH.,#295321); +#295321 = SURFACE_SIDE_STYLE('',(#295322)); +#295322 = SURFACE_STYLE_FILL_AREA(#295323); +#295323 = FILL_AREA_STYLE('',(#295324)); +#295324 = FILL_AREA_STYLE_COLOUR('',#282540); +#295325 = STYLED_ITEM('color',(#295326),#100932); +#295326 = PRESENTATION_STYLE_ASSIGNMENT((#295327)); +#295327 = SURFACE_STYLE_USAGE(.BOTH.,#295328); +#295328 = SURFACE_SIDE_STYLE('',(#295329)); +#295329 = SURFACE_STYLE_FILL_AREA(#295330); +#295330 = FILL_AREA_STYLE('',(#295331)); +#295331 = FILL_AREA_STYLE_COLOUR('',#282540); +#295332 = STYLED_ITEM('color',(#295333),#100949); +#295333 = PRESENTATION_STYLE_ASSIGNMENT((#295334)); +#295334 = SURFACE_STYLE_USAGE(.BOTH.,#295335); +#295335 = SURFACE_SIDE_STYLE('',(#295336)); +#295336 = SURFACE_STYLE_FILL_AREA(#295337); +#295337 = FILL_AREA_STYLE('',(#295338)); +#295338 = FILL_AREA_STYLE_COLOUR('',#282540); +#295339 = STYLED_ITEM('color',(#295340),#100966); +#295340 = PRESENTATION_STYLE_ASSIGNMENT((#295341)); +#295341 = SURFACE_STYLE_USAGE(.BOTH.,#295342); +#295342 = SURFACE_SIDE_STYLE('',(#295343)); +#295343 = SURFACE_STYLE_FILL_AREA(#295344); +#295344 = FILL_AREA_STYLE('',(#295345)); +#295345 = FILL_AREA_STYLE_COLOUR('',#282540); +#295346 = STYLED_ITEM('color',(#295347),#100983); +#295347 = PRESENTATION_STYLE_ASSIGNMENT((#295348)); +#295348 = SURFACE_STYLE_USAGE(.BOTH.,#295349); +#295349 = SURFACE_SIDE_STYLE('',(#295350)); +#295350 = SURFACE_STYLE_FILL_AREA(#295351); +#295351 = FILL_AREA_STYLE('',(#295352)); +#295352 = FILL_AREA_STYLE_COLOUR('',#282540); +#295353 = STYLED_ITEM('color',(#295354),#101000); +#295354 = PRESENTATION_STYLE_ASSIGNMENT((#295355)); +#295355 = SURFACE_STYLE_USAGE(.BOTH.,#295356); +#295356 = SURFACE_SIDE_STYLE('',(#295357)); +#295357 = SURFACE_STYLE_FILL_AREA(#295358); +#295358 = FILL_AREA_STYLE('',(#295359)); +#295359 = FILL_AREA_STYLE_COLOUR('',#282540); +#295360 = STYLED_ITEM('color',(#295361),#101017); +#295361 = PRESENTATION_STYLE_ASSIGNMENT((#295362)); +#295362 = SURFACE_STYLE_USAGE(.BOTH.,#295363); +#295363 = SURFACE_SIDE_STYLE('',(#295364)); +#295364 = SURFACE_STYLE_FILL_AREA(#295365); +#295365 = FILL_AREA_STYLE('',(#295366)); +#295366 = FILL_AREA_STYLE_COLOUR('',#282540); +#295367 = STYLED_ITEM('color',(#295368),#101034); +#295368 = PRESENTATION_STYLE_ASSIGNMENT((#295369)); +#295369 = SURFACE_STYLE_USAGE(.BOTH.,#295370); +#295370 = SURFACE_SIDE_STYLE('',(#295371)); +#295371 = SURFACE_STYLE_FILL_AREA(#295372); +#295372 = FILL_AREA_STYLE('',(#295373)); +#295373 = FILL_AREA_STYLE_COLOUR('',#282540); +#295374 = STYLED_ITEM('color',(#295375),#101051); +#295375 = PRESENTATION_STYLE_ASSIGNMENT((#295376)); +#295376 = SURFACE_STYLE_USAGE(.BOTH.,#295377); +#295377 = SURFACE_SIDE_STYLE('',(#295378)); +#295378 = SURFACE_STYLE_FILL_AREA(#295379); +#295379 = FILL_AREA_STYLE('',(#295380)); +#295380 = FILL_AREA_STYLE_COLOUR('',#282540); +#295381 = STYLED_ITEM('color',(#295382),#101068); +#295382 = PRESENTATION_STYLE_ASSIGNMENT((#295383)); +#295383 = SURFACE_STYLE_USAGE(.BOTH.,#295384); +#295384 = SURFACE_SIDE_STYLE('',(#295385)); +#295385 = SURFACE_STYLE_FILL_AREA(#295386); +#295386 = FILL_AREA_STYLE('',(#295387)); +#295387 = FILL_AREA_STYLE_COLOUR('',#282540); +#295388 = STYLED_ITEM('color',(#295389),#101080); +#295389 = PRESENTATION_STYLE_ASSIGNMENT((#295390)); +#295390 = SURFACE_STYLE_USAGE(.BOTH.,#295391); +#295391 = SURFACE_SIDE_STYLE('',(#295392)); +#295392 = SURFACE_STYLE_FILL_AREA(#295393); +#295393 = FILL_AREA_STYLE('',(#295394)); +#295394 = FILL_AREA_STYLE_COLOUR('',#282540); +#295395 = STYLED_ITEM('color',(#295396),#101102); +#295396 = PRESENTATION_STYLE_ASSIGNMENT((#295397)); +#295397 = SURFACE_STYLE_USAGE(.BOTH.,#295398); +#295398 = SURFACE_SIDE_STYLE('',(#295399)); +#295399 = SURFACE_STYLE_FILL_AREA(#295400); +#295400 = FILL_AREA_STYLE('',(#295401)); +#295401 = FILL_AREA_STYLE_COLOUR('',#282540); +#295402 = STYLED_ITEM('color',(#295403),#101119); +#295403 = PRESENTATION_STYLE_ASSIGNMENT((#295404)); +#295404 = SURFACE_STYLE_USAGE(.BOTH.,#295405); +#295405 = SURFACE_SIDE_STYLE('',(#295406)); +#295406 = SURFACE_STYLE_FILL_AREA(#295407); +#295407 = FILL_AREA_STYLE('',(#295408)); +#295408 = FILL_AREA_STYLE_COLOUR('',#282540); +#295409 = STYLED_ITEM('color',(#295410),#101136); +#295410 = PRESENTATION_STYLE_ASSIGNMENT((#295411)); +#295411 = SURFACE_STYLE_USAGE(.BOTH.,#295412); +#295412 = SURFACE_SIDE_STYLE('',(#295413)); +#295413 = SURFACE_STYLE_FILL_AREA(#295414); +#295414 = FILL_AREA_STYLE('',(#295415)); +#295415 = FILL_AREA_STYLE_COLOUR('',#282540); +#295416 = STYLED_ITEM('color',(#295417),#101153); +#295417 = PRESENTATION_STYLE_ASSIGNMENT((#295418)); +#295418 = SURFACE_STYLE_USAGE(.BOTH.,#295419); +#295419 = SURFACE_SIDE_STYLE('',(#295420)); +#295420 = SURFACE_STYLE_FILL_AREA(#295421); +#295421 = FILL_AREA_STYLE('',(#295422)); +#295422 = FILL_AREA_STYLE_COLOUR('',#282540); +#295423 = STYLED_ITEM('color',(#295424),#101170); +#295424 = PRESENTATION_STYLE_ASSIGNMENT((#295425)); +#295425 = SURFACE_STYLE_USAGE(.BOTH.,#295426); +#295426 = SURFACE_SIDE_STYLE('',(#295427)); +#295427 = SURFACE_STYLE_FILL_AREA(#295428); +#295428 = FILL_AREA_STYLE('',(#295429)); +#295429 = FILL_AREA_STYLE_COLOUR('',#282540); +#295430 = STYLED_ITEM('color',(#295431),#101182); +#295431 = PRESENTATION_STYLE_ASSIGNMENT((#295432)); +#295432 = SURFACE_STYLE_USAGE(.BOTH.,#295433); +#295433 = SURFACE_SIDE_STYLE('',(#295434)); +#295434 = SURFACE_STYLE_FILL_AREA(#295435); +#295435 = FILL_AREA_STYLE('',(#295436)); +#295436 = FILL_AREA_STYLE_COLOUR('',#282540); +#295437 = STYLED_ITEM('color',(#295438),#101199); +#295438 = PRESENTATION_STYLE_ASSIGNMENT((#295439)); +#295439 = SURFACE_STYLE_USAGE(.BOTH.,#295440); +#295440 = SURFACE_SIDE_STYLE('',(#295441)); +#295441 = SURFACE_STYLE_FILL_AREA(#295442); +#295442 = FILL_AREA_STYLE('',(#295443)); +#295443 = FILL_AREA_STYLE_COLOUR('',#282540); +#295444 = STYLED_ITEM('color',(#295445),#101216); +#295445 = PRESENTATION_STYLE_ASSIGNMENT((#295446)); +#295446 = SURFACE_STYLE_USAGE(.BOTH.,#295447); +#295447 = SURFACE_SIDE_STYLE('',(#295448)); +#295448 = SURFACE_STYLE_FILL_AREA(#295449); +#295449 = FILL_AREA_STYLE('',(#295450)); +#295450 = FILL_AREA_STYLE_COLOUR('',#282540); +#295451 = STYLED_ITEM('color',(#295452),#101233); +#295452 = PRESENTATION_STYLE_ASSIGNMENT((#295453)); +#295453 = SURFACE_STYLE_USAGE(.BOTH.,#295454); +#295454 = SURFACE_SIDE_STYLE('',(#295455)); +#295455 = SURFACE_STYLE_FILL_AREA(#295456); +#295456 = FILL_AREA_STYLE('',(#295457)); +#295457 = FILL_AREA_STYLE_COLOUR('',#282540); +#295458 = STYLED_ITEM('color',(#295459),#101250); +#295459 = PRESENTATION_STYLE_ASSIGNMENT((#295460)); +#295460 = SURFACE_STYLE_USAGE(.BOTH.,#295461); +#295461 = SURFACE_SIDE_STYLE('',(#295462)); +#295462 = SURFACE_STYLE_FILL_AREA(#295463); +#295463 = FILL_AREA_STYLE('',(#295464)); +#295464 = FILL_AREA_STYLE_COLOUR('',#282540); +#295465 = STYLED_ITEM('color',(#295466),#101267); +#295466 = PRESENTATION_STYLE_ASSIGNMENT((#295467)); +#295467 = SURFACE_STYLE_USAGE(.BOTH.,#295468); +#295468 = SURFACE_SIDE_STYLE('',(#295469)); +#295469 = SURFACE_STYLE_FILL_AREA(#295470); +#295470 = FILL_AREA_STYLE('',(#295471)); +#295471 = FILL_AREA_STYLE_COLOUR('',#282540); +#295472 = STYLED_ITEM('color',(#295473),#101284); +#295473 = PRESENTATION_STYLE_ASSIGNMENT((#295474)); +#295474 = SURFACE_STYLE_USAGE(.BOTH.,#295475); +#295475 = SURFACE_SIDE_STYLE('',(#295476)); +#295476 = SURFACE_STYLE_FILL_AREA(#295477); +#295477 = FILL_AREA_STYLE('',(#295478)); +#295478 = FILL_AREA_STYLE_COLOUR('',#282540); +#295479 = STYLED_ITEM('color',(#295480),#101301); +#295480 = PRESENTATION_STYLE_ASSIGNMENT((#295481)); +#295481 = SURFACE_STYLE_USAGE(.BOTH.,#295482); +#295482 = SURFACE_SIDE_STYLE('',(#295483)); +#295483 = SURFACE_STYLE_FILL_AREA(#295484); +#295484 = FILL_AREA_STYLE('',(#295485)); +#295485 = FILL_AREA_STYLE_COLOUR('',#282540); +#295486 = STYLED_ITEM('color',(#295487),#101318); +#295487 = PRESENTATION_STYLE_ASSIGNMENT((#295488)); +#295488 = SURFACE_STYLE_USAGE(.BOTH.,#295489); +#295489 = SURFACE_SIDE_STYLE('',(#295490)); +#295490 = SURFACE_STYLE_FILL_AREA(#295491); +#295491 = FILL_AREA_STYLE('',(#295492)); +#295492 = FILL_AREA_STYLE_COLOUR('',#282540); +#295493 = STYLED_ITEM('color',(#295494),#101330); +#295494 = PRESENTATION_STYLE_ASSIGNMENT((#295495)); +#295495 = SURFACE_STYLE_USAGE(.BOTH.,#295496); +#295496 = SURFACE_SIDE_STYLE('',(#295497)); +#295497 = SURFACE_STYLE_FILL_AREA(#295498); +#295498 = FILL_AREA_STYLE('',(#295499)); +#295499 = FILL_AREA_STYLE_COLOUR('',#282540); +#295500 = STYLED_ITEM('color',(#295501),#101352); +#295501 = PRESENTATION_STYLE_ASSIGNMENT((#295502)); +#295502 = SURFACE_STYLE_USAGE(.BOTH.,#295503); +#295503 = SURFACE_SIDE_STYLE('',(#295504)); +#295504 = SURFACE_STYLE_FILL_AREA(#295505); +#295505 = FILL_AREA_STYLE('',(#295506)); +#295506 = FILL_AREA_STYLE_COLOUR('',#282540); +#295507 = STYLED_ITEM('color',(#295508),#101369); +#295508 = PRESENTATION_STYLE_ASSIGNMENT((#295509)); +#295509 = SURFACE_STYLE_USAGE(.BOTH.,#295510); +#295510 = SURFACE_SIDE_STYLE('',(#295511)); +#295511 = SURFACE_STYLE_FILL_AREA(#295512); +#295512 = FILL_AREA_STYLE('',(#295513)); +#295513 = FILL_AREA_STYLE_COLOUR('',#282540); +#295514 = STYLED_ITEM('color',(#295515),#101386); +#295515 = PRESENTATION_STYLE_ASSIGNMENT((#295516)); +#295516 = SURFACE_STYLE_USAGE(.BOTH.,#295517); +#295517 = SURFACE_SIDE_STYLE('',(#295518)); +#295518 = SURFACE_STYLE_FILL_AREA(#295519); +#295519 = FILL_AREA_STYLE('',(#295520)); +#295520 = FILL_AREA_STYLE_COLOUR('',#282540); +#295521 = STYLED_ITEM('color',(#295522),#101403); +#295522 = PRESENTATION_STYLE_ASSIGNMENT((#295523)); +#295523 = SURFACE_STYLE_USAGE(.BOTH.,#295524); +#295524 = SURFACE_SIDE_STYLE('',(#295525)); +#295525 = SURFACE_STYLE_FILL_AREA(#295526); +#295526 = FILL_AREA_STYLE('',(#295527)); +#295527 = FILL_AREA_STYLE_COLOUR('',#282540); +#295528 = STYLED_ITEM('color',(#295529),#101420); +#295529 = PRESENTATION_STYLE_ASSIGNMENT((#295530)); +#295530 = SURFACE_STYLE_USAGE(.BOTH.,#295531); +#295531 = SURFACE_SIDE_STYLE('',(#295532)); +#295532 = SURFACE_STYLE_FILL_AREA(#295533); +#295533 = FILL_AREA_STYLE('',(#295534)); +#295534 = FILL_AREA_STYLE_COLOUR('',#282540); +#295535 = STYLED_ITEM('color',(#295536),#101432); +#295536 = PRESENTATION_STYLE_ASSIGNMENT((#295537)); +#295537 = SURFACE_STYLE_USAGE(.BOTH.,#295538); +#295538 = SURFACE_SIDE_STYLE('',(#295539)); +#295539 = SURFACE_STYLE_FILL_AREA(#295540); +#295540 = FILL_AREA_STYLE('',(#295541)); +#295541 = FILL_AREA_STYLE_COLOUR('',#282540); +#295542 = STYLED_ITEM('color',(#295543),#101449); +#295543 = PRESENTATION_STYLE_ASSIGNMENT((#295544)); +#295544 = SURFACE_STYLE_USAGE(.BOTH.,#295545); +#295545 = SURFACE_SIDE_STYLE('',(#295546)); +#295546 = SURFACE_STYLE_FILL_AREA(#295547); +#295547 = FILL_AREA_STYLE('',(#295548)); +#295548 = FILL_AREA_STYLE_COLOUR('',#282540); +#295549 = STYLED_ITEM('color',(#295550),#101466); +#295550 = PRESENTATION_STYLE_ASSIGNMENT((#295551)); +#295551 = SURFACE_STYLE_USAGE(.BOTH.,#295552); +#295552 = SURFACE_SIDE_STYLE('',(#295553)); +#295553 = SURFACE_STYLE_FILL_AREA(#295554); +#295554 = FILL_AREA_STYLE('',(#295555)); +#295555 = FILL_AREA_STYLE_COLOUR('',#282540); +#295556 = STYLED_ITEM('color',(#295557),#101483); +#295557 = PRESENTATION_STYLE_ASSIGNMENT((#295558)); +#295558 = SURFACE_STYLE_USAGE(.BOTH.,#295559); +#295559 = SURFACE_SIDE_STYLE('',(#295560)); +#295560 = SURFACE_STYLE_FILL_AREA(#295561); +#295561 = FILL_AREA_STYLE('',(#295562)); +#295562 = FILL_AREA_STYLE_COLOUR('',#282540); +#295563 = STYLED_ITEM('color',(#295564),#101500); +#295564 = PRESENTATION_STYLE_ASSIGNMENT((#295565)); +#295565 = SURFACE_STYLE_USAGE(.BOTH.,#295566); +#295566 = SURFACE_SIDE_STYLE('',(#295567)); +#295567 = SURFACE_STYLE_FILL_AREA(#295568); +#295568 = FILL_AREA_STYLE('',(#295569)); +#295569 = FILL_AREA_STYLE_COLOUR('',#282540); +#295570 = STYLED_ITEM('color',(#295571),#101517); +#295571 = PRESENTATION_STYLE_ASSIGNMENT((#295572)); +#295572 = SURFACE_STYLE_USAGE(.BOTH.,#295573); +#295573 = SURFACE_SIDE_STYLE('',(#295574)); +#295574 = SURFACE_STYLE_FILL_AREA(#295575); +#295575 = FILL_AREA_STYLE('',(#295576)); +#295576 = FILL_AREA_STYLE_COLOUR('',#282540); +#295577 = STYLED_ITEM('color',(#295578),#101534); +#295578 = PRESENTATION_STYLE_ASSIGNMENT((#295579)); +#295579 = SURFACE_STYLE_USAGE(.BOTH.,#295580); +#295580 = SURFACE_SIDE_STYLE('',(#295581)); +#295581 = SURFACE_STYLE_FILL_AREA(#295582); +#295582 = FILL_AREA_STYLE('',(#295583)); +#295583 = FILL_AREA_STYLE_COLOUR('',#282540); +#295584 = STYLED_ITEM('color',(#295585),#101551); +#295585 = PRESENTATION_STYLE_ASSIGNMENT((#295586)); +#295586 = SURFACE_STYLE_USAGE(.BOTH.,#295587); +#295587 = SURFACE_SIDE_STYLE('',(#295588)); +#295588 = SURFACE_STYLE_FILL_AREA(#295589); +#295589 = FILL_AREA_STYLE('',(#295590)); +#295590 = FILL_AREA_STYLE_COLOUR('',#282540); +#295591 = STYLED_ITEM('color',(#295592),#101568); +#295592 = PRESENTATION_STYLE_ASSIGNMENT((#295593)); +#295593 = SURFACE_STYLE_USAGE(.BOTH.,#295594); +#295594 = SURFACE_SIDE_STYLE('',(#295595)); +#295595 = SURFACE_STYLE_FILL_AREA(#295596); +#295596 = FILL_AREA_STYLE('',(#295597)); +#295597 = FILL_AREA_STYLE_COLOUR('',#282540); +#295598 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #295599,#295608,#295617,#295626,#295635,#295644,#295653,#295662, + #295671,#295680,#295689,#295698,#295707,#295716,#295725,#295734, + #295743,#295752,#295761,#295770,#295779,#295788,#295797,#295806, + #295815,#295824,#295833,#295842,#295851,#295860,#295869,#295878, + #295887,#295896,#295905,#295914,#295923,#295932,#295941,#295950, + #295959,#295968,#295977,#295986,#295995,#296004,#296013,#296022, + #296031,#296040,#296049,#296058,#296067,#296076,#296085,#296094, + #296103,#296112,#296121,#296130,#296139,#296148,#296157,#296166, + #296175,#296184,#296193,#296202,#296211,#296220,#296229,#296238, + #296247,#296256,#296265,#296274,#296283,#296292,#296301,#296310, + #296319,#296328,#296337,#296346,#296355,#296364,#296373,#296382, + #296391,#296400,#296409,#296418,#296427,#296436,#296445,#296454, + #296463,#296472,#296481,#296490,#296499,#296508,#296517,#296526, + #296535,#296544,#296553,#296562,#296571,#296580,#296589,#296598, + #296607,#296616,#296625,#296634,#296643,#296652,#296661,#296670, + #296679,#296688,#296697,#296706,#296715,#296724,#296733,#296742, + #296751,#296760,#296769,#296778,#296787,#296796,#296805,#296814, + #296823,#296832,#296841,#296850,#296859,#296868,#296877,#296886, + #296895,#296904,#296913,#296922,#296931,#296940,#296949,#296958, + #296967,#296976,#296985,#296994,#297003,#297012,#297021,#297030, + #297039,#297048,#297057,#297066,#297075,#297084,#297093,#297102, + #297111,#297120,#297129,#297138,#297147,#297156,#297165,#297174, + #297183,#297192,#297201,#297210,#297219,#297228,#297237,#297246, + #297255,#297264,#297273,#297282,#297291,#297300,#297309,#297318, + #297327,#297336,#297345,#297354,#297363,#297372,#297381,#297390, + #297399,#297408,#297417,#297426,#297435,#297444,#297453,#297462, + #297471,#297480,#297489,#297498,#297507,#297516,#297525,#297534, + #297543),#87098); +#295599 = STYLED_ITEM('color',(#295600),#81317); +#295600 = PRESENTATION_STYLE_ASSIGNMENT((#295601,#295606)); +#295601 = SURFACE_STYLE_USAGE(.BOTH.,#295602); +#295602 = SURFACE_SIDE_STYLE('',(#295603)); +#295603 = SURFACE_STYLE_FILL_AREA(#295604); +#295604 = FILL_AREA_STYLE('',(#295605)); +#295605 = FILL_AREA_STYLE_COLOUR('',#293072); +#295606 = CURVE_STYLE('',#295607,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295608 = OVER_RIDING_STYLED_ITEM('overriding color',(#295609),#81419, + #295599); +#295609 = PRESENTATION_STYLE_ASSIGNMENT((#295610,#295615)); +#295610 = SURFACE_STYLE_USAGE(.BOTH.,#295611); +#295611 = SURFACE_SIDE_STYLE('',(#295612)); +#295612 = SURFACE_STYLE_FILL_AREA(#295613); +#295613 = FILL_AREA_STYLE('',(#295614)); +#295614 = FILL_AREA_STYLE_COLOUR('',#282540); +#295615 = CURVE_STYLE('',#295616,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295617 = OVER_RIDING_STYLED_ITEM('overriding color',(#295618),#81429, + #295599); +#295618 = PRESENTATION_STYLE_ASSIGNMENT((#295619,#295624)); +#295619 = SURFACE_STYLE_USAGE(.BOTH.,#295620); +#295620 = SURFACE_SIDE_STYLE('',(#295621)); +#295621 = SURFACE_STYLE_FILL_AREA(#295622); +#295622 = FILL_AREA_STYLE('',(#295623)); +#295623 = FILL_AREA_STYLE_COLOUR('',#282540); +#295624 = CURVE_STYLE('',#295625,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295626 = OVER_RIDING_STYLED_ITEM('overriding color',(#295627),#81437, + #295599); +#295627 = PRESENTATION_STYLE_ASSIGNMENT((#295628,#295633)); +#295628 = SURFACE_STYLE_USAGE(.BOTH.,#295629); +#295629 = SURFACE_SIDE_STYLE('',(#295630)); +#295630 = SURFACE_STYLE_FILL_AREA(#295631); +#295631 = FILL_AREA_STYLE('',(#295632)); +#295632 = FILL_AREA_STYLE_COLOUR('',#282540); +#295633 = CURVE_STYLE('',#295634,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295635 = OVER_RIDING_STYLED_ITEM('overriding color',(#295636),#81445, + #295599); +#295636 = PRESENTATION_STYLE_ASSIGNMENT((#295637,#295642)); +#295637 = SURFACE_STYLE_USAGE(.BOTH.,#295638); +#295638 = SURFACE_SIDE_STYLE('',(#295639)); +#295639 = SURFACE_STYLE_FILL_AREA(#295640); +#295640 = FILL_AREA_STYLE('',(#295641)); +#295641 = FILL_AREA_STYLE_COLOUR('',#282540); +#295642 = CURVE_STYLE('',#295643,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295644 = OVER_RIDING_STYLED_ITEM('overriding color',(#295645),#81453, + #295599); +#295645 = PRESENTATION_STYLE_ASSIGNMENT((#295646,#295651)); +#295646 = SURFACE_STYLE_USAGE(.BOTH.,#295647); +#295647 = SURFACE_SIDE_STYLE('',(#295648)); +#295648 = SURFACE_STYLE_FILL_AREA(#295649); +#295649 = FILL_AREA_STYLE('',(#295650)); +#295650 = FILL_AREA_STYLE_COLOUR('',#282540); +#295651 = CURVE_STYLE('',#295652,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295653 = OVER_RIDING_STYLED_ITEM('overriding color',(#295654),#81463, + #295599); +#295654 = PRESENTATION_STYLE_ASSIGNMENT((#295655,#295660)); +#295655 = SURFACE_STYLE_USAGE(.BOTH.,#295656); +#295656 = SURFACE_SIDE_STYLE('',(#295657)); +#295657 = SURFACE_STYLE_FILL_AREA(#295658); +#295658 = FILL_AREA_STYLE('',(#295659)); +#295659 = FILL_AREA_STYLE_COLOUR('',#282540); +#295660 = CURVE_STYLE('',#295661,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295662 = OVER_RIDING_STYLED_ITEM('overriding color',(#295663),#81471, + #295599); +#295663 = PRESENTATION_STYLE_ASSIGNMENT((#295664,#295669)); +#295664 = SURFACE_STYLE_USAGE(.BOTH.,#295665); +#295665 = SURFACE_SIDE_STYLE('',(#295666)); +#295666 = SURFACE_STYLE_FILL_AREA(#295667); +#295667 = FILL_AREA_STYLE('',(#295668)); +#295668 = FILL_AREA_STYLE_COLOUR('',#282540); +#295669 = CURVE_STYLE('',#295670,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295671 = OVER_RIDING_STYLED_ITEM('overriding color',(#295672),#81479, + #295599); +#295672 = PRESENTATION_STYLE_ASSIGNMENT((#295673,#295678)); +#295673 = SURFACE_STYLE_USAGE(.BOTH.,#295674); +#295674 = SURFACE_SIDE_STYLE('',(#295675)); +#295675 = SURFACE_STYLE_FILL_AREA(#295676); +#295676 = FILL_AREA_STYLE('',(#295677)); +#295677 = FILL_AREA_STYLE_COLOUR('',#282540); +#295678 = CURVE_STYLE('',#295679,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295680 = OVER_RIDING_STYLED_ITEM('overriding color',(#295681),#81487, + #295599); +#295681 = PRESENTATION_STYLE_ASSIGNMENT((#295682,#295687)); +#295682 = SURFACE_STYLE_USAGE(.BOTH.,#295683); +#295683 = SURFACE_SIDE_STYLE('',(#295684)); +#295684 = SURFACE_STYLE_FILL_AREA(#295685); +#295685 = FILL_AREA_STYLE('',(#295686)); +#295686 = FILL_AREA_STYLE_COLOUR('',#282540); +#295687 = CURVE_STYLE('',#295688,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295689 = OVER_RIDING_STYLED_ITEM('overriding color',(#295690),#81497, + #295599); +#295690 = PRESENTATION_STYLE_ASSIGNMENT((#295691,#295696)); +#295691 = SURFACE_STYLE_USAGE(.BOTH.,#295692); +#295692 = SURFACE_SIDE_STYLE('',(#295693)); +#295693 = SURFACE_STYLE_FILL_AREA(#295694); +#295694 = FILL_AREA_STYLE('',(#295695)); +#295695 = FILL_AREA_STYLE_COLOUR('',#282540); +#295696 = CURVE_STYLE('',#295697,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295698 = OVER_RIDING_STYLED_ITEM('overriding color',(#295699),#81505, + #295599); +#295699 = PRESENTATION_STYLE_ASSIGNMENT((#295700,#295705)); +#295700 = SURFACE_STYLE_USAGE(.BOTH.,#295701); +#295701 = SURFACE_SIDE_STYLE('',(#295702)); +#295702 = SURFACE_STYLE_FILL_AREA(#295703); +#295703 = FILL_AREA_STYLE('',(#295704)); +#295704 = FILL_AREA_STYLE_COLOUR('',#282540); +#295705 = CURVE_STYLE('',#295706,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295707 = OVER_RIDING_STYLED_ITEM('overriding color',(#295708),#81513, + #295599); +#295708 = PRESENTATION_STYLE_ASSIGNMENT((#295709,#295714)); +#295709 = SURFACE_STYLE_USAGE(.BOTH.,#295710); +#295710 = SURFACE_SIDE_STYLE('',(#295711)); +#295711 = SURFACE_STYLE_FILL_AREA(#295712); +#295712 = FILL_AREA_STYLE('',(#295713)); +#295713 = FILL_AREA_STYLE_COLOUR('',#282540); +#295714 = CURVE_STYLE('',#295715,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295716 = OVER_RIDING_STYLED_ITEM('overriding color',(#295717),#81521, + #295599); +#295717 = PRESENTATION_STYLE_ASSIGNMENT((#295718,#295723)); +#295718 = SURFACE_STYLE_USAGE(.BOTH.,#295719); +#295719 = SURFACE_SIDE_STYLE('',(#295720)); +#295720 = SURFACE_STYLE_FILL_AREA(#295721); +#295721 = FILL_AREA_STYLE('',(#295722)); +#295722 = FILL_AREA_STYLE_COLOUR('',#282540); +#295723 = CURVE_STYLE('',#295724,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295725 = OVER_RIDING_STYLED_ITEM('overriding color',(#295726),#81531, + #295599); +#295726 = PRESENTATION_STYLE_ASSIGNMENT((#295727,#295732)); +#295727 = SURFACE_STYLE_USAGE(.BOTH.,#295728); +#295728 = SURFACE_SIDE_STYLE('',(#295729)); +#295729 = SURFACE_STYLE_FILL_AREA(#295730); +#295730 = FILL_AREA_STYLE('',(#295731)); +#295731 = FILL_AREA_STYLE_COLOUR('',#282540); +#295732 = CURVE_STYLE('',#295733,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295734 = OVER_RIDING_STYLED_ITEM('overriding color',(#295735),#81539, + #295599); +#295735 = PRESENTATION_STYLE_ASSIGNMENT((#295736,#295741)); +#295736 = SURFACE_STYLE_USAGE(.BOTH.,#295737); +#295737 = SURFACE_SIDE_STYLE('',(#295738)); +#295738 = SURFACE_STYLE_FILL_AREA(#295739); +#295739 = FILL_AREA_STYLE('',(#295740)); +#295740 = FILL_AREA_STYLE_COLOUR('',#282540); +#295741 = CURVE_STYLE('',#295742,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295743 = OVER_RIDING_STYLED_ITEM('overriding color',(#295744),#81547, + #295599); +#295744 = PRESENTATION_STYLE_ASSIGNMENT((#295745,#295750)); +#295745 = SURFACE_STYLE_USAGE(.BOTH.,#295746); +#295746 = SURFACE_SIDE_STYLE('',(#295747)); +#295747 = SURFACE_STYLE_FILL_AREA(#295748); +#295748 = FILL_AREA_STYLE('',(#295749)); +#295749 = FILL_AREA_STYLE_COLOUR('',#282540); +#295750 = CURVE_STYLE('',#295751,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295752 = OVER_RIDING_STYLED_ITEM('overriding color',(#295753),#81555, + #295599); +#295753 = PRESENTATION_STYLE_ASSIGNMENT((#295754,#295759)); +#295754 = SURFACE_STYLE_USAGE(.BOTH.,#295755); +#295755 = SURFACE_SIDE_STYLE('',(#295756)); +#295756 = SURFACE_STYLE_FILL_AREA(#295757); +#295757 = FILL_AREA_STYLE('',(#295758)); +#295758 = FILL_AREA_STYLE_COLOUR('',#282540); +#295759 = CURVE_STYLE('',#295760,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295761 = OVER_RIDING_STYLED_ITEM('overriding color',(#295762),#81565, + #295599); +#295762 = PRESENTATION_STYLE_ASSIGNMENT((#295763,#295768)); +#295763 = SURFACE_STYLE_USAGE(.BOTH.,#295764); +#295764 = SURFACE_SIDE_STYLE('',(#295765)); +#295765 = SURFACE_STYLE_FILL_AREA(#295766); +#295766 = FILL_AREA_STYLE('',(#295767)); +#295767 = FILL_AREA_STYLE_COLOUR('',#282540); +#295768 = CURVE_STYLE('',#295769,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295770 = OVER_RIDING_STYLED_ITEM('overriding color',(#295771),#81573, + #295599); +#295771 = PRESENTATION_STYLE_ASSIGNMENT((#295772,#295777)); +#295772 = SURFACE_STYLE_USAGE(.BOTH.,#295773); +#295773 = SURFACE_SIDE_STYLE('',(#295774)); +#295774 = SURFACE_STYLE_FILL_AREA(#295775); +#295775 = FILL_AREA_STYLE('',(#295776)); +#295776 = FILL_AREA_STYLE_COLOUR('',#282540); +#295777 = CURVE_STYLE('',#295778,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295779 = OVER_RIDING_STYLED_ITEM('overriding color',(#295780),#81581, + #295599); +#295780 = PRESENTATION_STYLE_ASSIGNMENT((#295781,#295786)); +#295781 = SURFACE_STYLE_USAGE(.BOTH.,#295782); +#295782 = SURFACE_SIDE_STYLE('',(#295783)); +#295783 = SURFACE_STYLE_FILL_AREA(#295784); +#295784 = FILL_AREA_STYLE('',(#295785)); +#295785 = FILL_AREA_STYLE_COLOUR('',#282540); +#295786 = CURVE_STYLE('',#295787,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295788 = STYLED_ITEM('color',(#295789),#81591); +#295789 = PRESENTATION_STYLE_ASSIGNMENT((#295790,#295795)); +#295790 = SURFACE_STYLE_USAGE(.BOTH.,#295791); +#295791 = SURFACE_SIDE_STYLE('',(#295792)); +#295792 = SURFACE_STYLE_FILL_AREA(#295793); +#295793 = FILL_AREA_STYLE('',(#295794)); +#295794 = FILL_AREA_STYLE_COLOUR('',#293072); +#295795 = CURVE_STYLE('',#295796,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295797 = STYLED_ITEM('color',(#295798),#81669); +#295798 = PRESENTATION_STYLE_ASSIGNMENT((#295799,#295804)); +#295799 = SURFACE_STYLE_USAGE(.BOTH.,#295800); +#295800 = SURFACE_SIDE_STYLE('',(#295801)); +#295801 = SURFACE_STYLE_FILL_AREA(#295802); +#295802 = FILL_AREA_STYLE('',(#295803)); +#295803 = FILL_AREA_STYLE_COLOUR('',#293072); +#295804 = CURVE_STYLE('',#295805,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295806 = STYLED_ITEM('color',(#295807),#81863); +#295807 = PRESENTATION_STYLE_ASSIGNMENT((#295808,#295813)); +#295808 = SURFACE_STYLE_USAGE(.BOTH.,#295809); +#295809 = SURFACE_SIDE_STYLE('',(#295810)); +#295810 = SURFACE_STYLE_FILL_AREA(#295811); +#295811 = FILL_AREA_STYLE('',(#295812)); +#295812 = FILL_AREA_STYLE_COLOUR('',#293072); +#295813 = CURVE_STYLE('',#295814,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295815 = STYLED_ITEM('color',(#295816),#81887); +#295816 = PRESENTATION_STYLE_ASSIGNMENT((#295817,#295822)); +#295817 = SURFACE_STYLE_USAGE(.BOTH.,#295818); +#295818 = SURFACE_SIDE_STYLE('',(#295819)); +#295819 = SURFACE_STYLE_FILL_AREA(#295820); +#295820 = FILL_AREA_STYLE('',(#295821)); +#295821 = FILL_AREA_STYLE_COLOUR('',#293072); +#295822 = CURVE_STYLE('',#295823,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295824 = STYLED_ITEM('color',(#295825),#81958); +#295825 = PRESENTATION_STYLE_ASSIGNMENT((#295826,#295831)); +#295826 = SURFACE_STYLE_USAGE(.BOTH.,#295827); +#295827 = SURFACE_SIDE_STYLE('',(#295828)); +#295828 = SURFACE_STYLE_FILL_AREA(#295829); +#295829 = FILL_AREA_STYLE('',(#295830)); +#295830 = FILL_AREA_STYLE_COLOUR('',#293072); +#295831 = CURVE_STYLE('',#295832,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295833 = STYLED_ITEM('color',(#295834),#81982); +#295834 = PRESENTATION_STYLE_ASSIGNMENT((#295835,#295840)); +#295835 = SURFACE_STYLE_USAGE(.BOTH.,#295836); +#295836 = SURFACE_SIDE_STYLE('',(#295837)); +#295837 = SURFACE_STYLE_FILL_AREA(#295838); +#295838 = FILL_AREA_STYLE('',(#295839)); +#295839 = FILL_AREA_STYLE_COLOUR('',#293072); +#295840 = CURVE_STYLE('',#295841,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295842 = STYLED_ITEM('color',(#295843),#82006); +#295843 = PRESENTATION_STYLE_ASSIGNMENT((#295844,#295849)); +#295844 = SURFACE_STYLE_USAGE(.BOTH.,#295845); +#295845 = SURFACE_SIDE_STYLE('',(#295846)); +#295846 = SURFACE_STYLE_FILL_AREA(#295847); +#295847 = FILL_AREA_STYLE('',(#295848)); +#295848 = FILL_AREA_STYLE_COLOUR('',#293072); +#295849 = CURVE_STYLE('',#295850,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295851 = STYLED_ITEM('color',(#295852),#82023); +#295852 = PRESENTATION_STYLE_ASSIGNMENT((#295853,#295858)); +#295853 = SURFACE_STYLE_USAGE(.BOTH.,#295854); +#295854 = SURFACE_SIDE_STYLE('',(#295855)); +#295855 = SURFACE_STYLE_FILL_AREA(#295856); +#295856 = FILL_AREA_STYLE('',(#295857)); +#295857 = FILL_AREA_STYLE_COLOUR('',#293072); +#295858 = CURVE_STYLE('',#295859,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295860 = STYLED_ITEM('color',(#295861),#82047); +#295861 = PRESENTATION_STYLE_ASSIGNMENT((#295862,#295867)); +#295862 = SURFACE_STYLE_USAGE(.BOTH.,#295863); +#295863 = SURFACE_SIDE_STYLE('',(#295864)); +#295864 = SURFACE_STYLE_FILL_AREA(#295865); +#295865 = FILL_AREA_STYLE('',(#295866)); +#295866 = FILL_AREA_STYLE_COLOUR('',#293072); +#295867 = CURVE_STYLE('',#295868,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295869 = STYLED_ITEM('color',(#295870),#82064); +#295870 = PRESENTATION_STYLE_ASSIGNMENT((#295871,#295876)); +#295871 = SURFACE_STYLE_USAGE(.BOTH.,#295872); +#295872 = SURFACE_SIDE_STYLE('',(#295873)); +#295873 = SURFACE_STYLE_FILL_AREA(#295874); +#295874 = FILL_AREA_STYLE('',(#295875)); +#295875 = FILL_AREA_STYLE_COLOUR('',#293072); +#295876 = CURVE_STYLE('',#295877,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#295877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295878 = STYLED_ITEM('color',(#295879),#82081); +#295879 = PRESENTATION_STYLE_ASSIGNMENT((#295880,#295885)); +#295880 = SURFACE_STYLE_USAGE(.BOTH.,#295881); +#295881 = SURFACE_SIDE_STYLE('',(#295882)); +#295882 = SURFACE_STYLE_FILL_AREA(#295883); +#295883 = FILL_AREA_STYLE('',(#295884)); +#295884 = FILL_AREA_STYLE_COLOUR('',#282540); +#295885 = CURVE_STYLE('',#295886,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295887 = STYLED_ITEM('color',(#295888),#82112); +#295888 = PRESENTATION_STYLE_ASSIGNMENT((#295889,#295894)); +#295889 = SURFACE_STYLE_USAGE(.BOTH.,#295890); +#295890 = SURFACE_SIDE_STYLE('',(#295891)); +#295891 = SURFACE_STYLE_FILL_AREA(#295892); +#295892 = FILL_AREA_STYLE('',(#295893)); +#295893 = FILL_AREA_STYLE_COLOUR('',#282540); +#295894 = CURVE_STYLE('',#295895,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295896 = STYLED_ITEM('color',(#295897),#82136); +#295897 = PRESENTATION_STYLE_ASSIGNMENT((#295898,#295903)); +#295898 = SURFACE_STYLE_USAGE(.BOTH.,#295899); +#295899 = SURFACE_SIDE_STYLE('',(#295900)); +#295900 = SURFACE_STYLE_FILL_AREA(#295901); +#295901 = FILL_AREA_STYLE('',(#295902)); +#295902 = FILL_AREA_STYLE_COLOUR('',#282540); +#295903 = CURVE_STYLE('',#295904,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295905 = STYLED_ITEM('color',(#295906),#82160); +#295906 = PRESENTATION_STYLE_ASSIGNMENT((#295907,#295912)); +#295907 = SURFACE_STYLE_USAGE(.BOTH.,#295908); +#295908 = SURFACE_SIDE_STYLE('',(#295909)); +#295909 = SURFACE_STYLE_FILL_AREA(#295910); +#295910 = FILL_AREA_STYLE('',(#295911)); +#295911 = FILL_AREA_STYLE_COLOUR('',#282540); +#295912 = CURVE_STYLE('',#295913,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295914 = STYLED_ITEM('color',(#295915),#82177); +#295915 = PRESENTATION_STYLE_ASSIGNMENT((#295916,#295921)); +#295916 = SURFACE_STYLE_USAGE(.BOTH.,#295917); +#295917 = SURFACE_SIDE_STYLE('',(#295918)); +#295918 = SURFACE_STYLE_FILL_AREA(#295919); +#295919 = FILL_AREA_STYLE('',(#295920)); +#295920 = FILL_AREA_STYLE_COLOUR('',#282540); +#295921 = CURVE_STYLE('',#295922,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295923 = STYLED_ITEM('color',(#295924),#82208); +#295924 = PRESENTATION_STYLE_ASSIGNMENT((#295925,#295930)); +#295925 = SURFACE_STYLE_USAGE(.BOTH.,#295926); +#295926 = SURFACE_SIDE_STYLE('',(#295927)); +#295927 = SURFACE_STYLE_FILL_AREA(#295928); +#295928 = FILL_AREA_STYLE('',(#295929)); +#295929 = FILL_AREA_STYLE_COLOUR('',#282540); +#295930 = CURVE_STYLE('',#295931,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295932 = STYLED_ITEM('color',(#295933),#82232); +#295933 = PRESENTATION_STYLE_ASSIGNMENT((#295934,#295939)); +#295934 = SURFACE_STYLE_USAGE(.BOTH.,#295935); +#295935 = SURFACE_SIDE_STYLE('',(#295936)); +#295936 = SURFACE_STYLE_FILL_AREA(#295937); +#295937 = FILL_AREA_STYLE('',(#295938)); +#295938 = FILL_AREA_STYLE_COLOUR('',#282540); +#295939 = CURVE_STYLE('',#295940,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295941 = STYLED_ITEM('color',(#295942),#82256); +#295942 = PRESENTATION_STYLE_ASSIGNMENT((#295943,#295948)); +#295943 = SURFACE_STYLE_USAGE(.BOTH.,#295944); +#295944 = SURFACE_SIDE_STYLE('',(#295945)); +#295945 = SURFACE_STYLE_FILL_AREA(#295946); +#295946 = FILL_AREA_STYLE('',(#295947)); +#295947 = FILL_AREA_STYLE_COLOUR('',#282540); +#295948 = CURVE_STYLE('',#295949,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295950 = STYLED_ITEM('color',(#295951),#82273); +#295951 = PRESENTATION_STYLE_ASSIGNMENT((#295952,#295957)); +#295952 = SURFACE_STYLE_USAGE(.BOTH.,#295953); +#295953 = SURFACE_SIDE_STYLE('',(#295954)); +#295954 = SURFACE_STYLE_FILL_AREA(#295955); +#295955 = FILL_AREA_STYLE('',(#295956)); +#295956 = FILL_AREA_STYLE_COLOUR('',#282540); +#295957 = CURVE_STYLE('',#295958,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295959 = STYLED_ITEM('color',(#295960),#82304); +#295960 = PRESENTATION_STYLE_ASSIGNMENT((#295961,#295966)); +#295961 = SURFACE_STYLE_USAGE(.BOTH.,#295962); +#295962 = SURFACE_SIDE_STYLE('',(#295963)); +#295963 = SURFACE_STYLE_FILL_AREA(#295964); +#295964 = FILL_AREA_STYLE('',(#295965)); +#295965 = FILL_AREA_STYLE_COLOUR('',#282540); +#295966 = CURVE_STYLE('',#295967,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295968 = STYLED_ITEM('color',(#295969),#82328); +#295969 = PRESENTATION_STYLE_ASSIGNMENT((#295970,#295975)); +#295970 = SURFACE_STYLE_USAGE(.BOTH.,#295971); +#295971 = SURFACE_SIDE_STYLE('',(#295972)); +#295972 = SURFACE_STYLE_FILL_AREA(#295973); +#295973 = FILL_AREA_STYLE('',(#295974)); +#295974 = FILL_AREA_STYLE_COLOUR('',#282540); +#295975 = CURVE_STYLE('',#295976,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295977 = STYLED_ITEM('color',(#295978),#82352); +#295978 = PRESENTATION_STYLE_ASSIGNMENT((#295979,#295984)); +#295979 = SURFACE_STYLE_USAGE(.BOTH.,#295980); +#295980 = SURFACE_SIDE_STYLE('',(#295981)); +#295981 = SURFACE_STYLE_FILL_AREA(#295982); +#295982 = FILL_AREA_STYLE('',(#295983)); +#295983 = FILL_AREA_STYLE_COLOUR('',#282540); +#295984 = CURVE_STYLE('',#295985,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295986 = STYLED_ITEM('color',(#295987),#82369); +#295987 = PRESENTATION_STYLE_ASSIGNMENT((#295988,#295993)); +#295988 = SURFACE_STYLE_USAGE(.BOTH.,#295989); +#295989 = SURFACE_SIDE_STYLE('',(#295990)); +#295990 = SURFACE_STYLE_FILL_AREA(#295991); +#295991 = FILL_AREA_STYLE('',(#295992)); +#295992 = FILL_AREA_STYLE_COLOUR('',#282540); +#295993 = CURVE_STYLE('',#295994,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#295994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295995 = STYLED_ITEM('color',(#295996),#82400); +#295996 = PRESENTATION_STYLE_ASSIGNMENT((#295997,#296002)); +#295997 = SURFACE_STYLE_USAGE(.BOTH.,#295998); +#295998 = SURFACE_SIDE_STYLE('',(#295999)); +#295999 = SURFACE_STYLE_FILL_AREA(#296000); +#296000 = FILL_AREA_STYLE('',(#296001)); +#296001 = FILL_AREA_STYLE_COLOUR('',#282540); +#296002 = CURVE_STYLE('',#296003,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296004 = STYLED_ITEM('color',(#296005),#82424); +#296005 = PRESENTATION_STYLE_ASSIGNMENT((#296006,#296011)); +#296006 = SURFACE_STYLE_USAGE(.BOTH.,#296007); +#296007 = SURFACE_SIDE_STYLE('',(#296008)); +#296008 = SURFACE_STYLE_FILL_AREA(#296009); +#296009 = FILL_AREA_STYLE('',(#296010)); +#296010 = FILL_AREA_STYLE_COLOUR('',#282540); +#296011 = CURVE_STYLE('',#296012,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296013 = STYLED_ITEM('color',(#296014),#82448); +#296014 = PRESENTATION_STYLE_ASSIGNMENT((#296015,#296020)); +#296015 = SURFACE_STYLE_USAGE(.BOTH.,#296016); +#296016 = SURFACE_SIDE_STYLE('',(#296017)); +#296017 = SURFACE_STYLE_FILL_AREA(#296018); +#296018 = FILL_AREA_STYLE('',(#296019)); +#296019 = FILL_AREA_STYLE_COLOUR('',#282540); +#296020 = CURVE_STYLE('',#296021,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296022 = STYLED_ITEM('color',(#296023),#82465); +#296023 = PRESENTATION_STYLE_ASSIGNMENT((#296024,#296029)); +#296024 = SURFACE_STYLE_USAGE(.BOTH.,#296025); +#296025 = SURFACE_SIDE_STYLE('',(#296026)); +#296026 = SURFACE_STYLE_FILL_AREA(#296027); +#296027 = FILL_AREA_STYLE('',(#296028)); +#296028 = FILL_AREA_STYLE_COLOUR('',#282540); +#296029 = CURVE_STYLE('',#296030,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296031 = STYLED_ITEM('color',(#296032),#82496); +#296032 = PRESENTATION_STYLE_ASSIGNMENT((#296033,#296038)); +#296033 = SURFACE_STYLE_USAGE(.BOTH.,#296034); +#296034 = SURFACE_SIDE_STYLE('',(#296035)); +#296035 = SURFACE_STYLE_FILL_AREA(#296036); +#296036 = FILL_AREA_STYLE('',(#296037)); +#296037 = FILL_AREA_STYLE_COLOUR('',#282540); +#296038 = CURVE_STYLE('',#296039,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296040 = STYLED_ITEM('color',(#296041),#82520); +#296041 = PRESENTATION_STYLE_ASSIGNMENT((#296042,#296047)); +#296042 = SURFACE_STYLE_USAGE(.BOTH.,#296043); +#296043 = SURFACE_SIDE_STYLE('',(#296044)); +#296044 = SURFACE_STYLE_FILL_AREA(#296045); +#296045 = FILL_AREA_STYLE('',(#296046)); +#296046 = FILL_AREA_STYLE_COLOUR('',#282540); +#296047 = CURVE_STYLE('',#296048,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296049 = STYLED_ITEM('color',(#296050),#82544); +#296050 = PRESENTATION_STYLE_ASSIGNMENT((#296051,#296056)); +#296051 = SURFACE_STYLE_USAGE(.BOTH.,#296052); +#296052 = SURFACE_SIDE_STYLE('',(#296053)); +#296053 = SURFACE_STYLE_FILL_AREA(#296054); +#296054 = FILL_AREA_STYLE('',(#296055)); +#296055 = FILL_AREA_STYLE_COLOUR('',#282540); +#296056 = CURVE_STYLE('',#296057,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296058 = STYLED_ITEM('color',(#296059),#82561); +#296059 = PRESENTATION_STYLE_ASSIGNMENT((#296060,#296065)); +#296060 = SURFACE_STYLE_USAGE(.BOTH.,#296061); +#296061 = SURFACE_SIDE_STYLE('',(#296062)); +#296062 = SURFACE_STYLE_FILL_AREA(#296063); +#296063 = FILL_AREA_STYLE('',(#296064)); +#296064 = FILL_AREA_STYLE_COLOUR('',#293072); +#296065 = CURVE_STYLE('',#296066,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296067 = STYLED_ITEM('color',(#296068),#82583); +#296068 = PRESENTATION_STYLE_ASSIGNMENT((#296069,#296074)); +#296069 = SURFACE_STYLE_USAGE(.BOTH.,#296070); +#296070 = SURFACE_SIDE_STYLE('',(#296071)); +#296071 = SURFACE_STYLE_FILL_AREA(#296072); +#296072 = FILL_AREA_STYLE('',(#296073)); +#296073 = FILL_AREA_STYLE_COLOUR('',#293072); +#296074 = CURVE_STYLE('',#296075,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296076 = STYLED_ITEM('color',(#296077),#82655); +#296077 = PRESENTATION_STYLE_ASSIGNMENT((#296078,#296083)); +#296078 = SURFACE_STYLE_USAGE(.BOTH.,#296079); +#296079 = SURFACE_SIDE_STYLE('',(#296080)); +#296080 = SURFACE_STYLE_FILL_AREA(#296081); +#296081 = FILL_AREA_STYLE('',(#296082)); +#296082 = FILL_AREA_STYLE_COLOUR('',#293072); +#296083 = CURVE_STYLE('',#296084,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296085 = STYLED_ITEM('color',(#296086),#82667); +#296086 = PRESENTATION_STYLE_ASSIGNMENT((#296087,#296092)); +#296087 = SURFACE_STYLE_USAGE(.BOTH.,#296088); +#296088 = SURFACE_SIDE_STYLE('',(#296089)); +#296089 = SURFACE_STYLE_FILL_AREA(#296090); +#296090 = FILL_AREA_STYLE('',(#296091)); +#296091 = FILL_AREA_STYLE_COLOUR('',#293072); +#296092 = CURVE_STYLE('',#296093,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296094 = STYLED_ITEM('color',(#296095),#82679); +#296095 = PRESENTATION_STYLE_ASSIGNMENT((#296096,#296101)); +#296096 = SURFACE_STYLE_USAGE(.BOTH.,#296097); +#296097 = SURFACE_SIDE_STYLE('',(#296098)); +#296098 = SURFACE_STYLE_FILL_AREA(#296099); +#296099 = FILL_AREA_STYLE('',(#296100)); +#296100 = FILL_AREA_STYLE_COLOUR('',#293072); +#296101 = CURVE_STYLE('',#296102,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296103 = STYLED_ITEM('color',(#296104),#82691); +#296104 = PRESENTATION_STYLE_ASSIGNMENT((#296105,#296110)); +#296105 = SURFACE_STYLE_USAGE(.BOTH.,#296106); +#296106 = SURFACE_SIDE_STYLE('',(#296107)); +#296107 = SURFACE_STYLE_FILL_AREA(#296108); +#296108 = FILL_AREA_STYLE('',(#296109)); +#296109 = FILL_AREA_STYLE_COLOUR('',#293072); +#296110 = CURVE_STYLE('',#296111,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296112 = STYLED_ITEM('color',(#296113),#82720); +#296113 = PRESENTATION_STYLE_ASSIGNMENT((#296114,#296119)); +#296114 = SURFACE_STYLE_USAGE(.BOTH.,#296115); +#296115 = SURFACE_SIDE_STYLE('',(#296116)); +#296116 = SURFACE_STYLE_FILL_AREA(#296117); +#296117 = FILL_AREA_STYLE('',(#296118)); +#296118 = FILL_AREA_STYLE_COLOUR('',#293072); +#296119 = CURVE_STYLE('',#296120,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296121 = STYLED_ITEM('color',(#296122),#82743); +#296122 = PRESENTATION_STYLE_ASSIGNMENT((#296123,#296128)); +#296123 = SURFACE_STYLE_USAGE(.BOTH.,#296124); +#296124 = SURFACE_SIDE_STYLE('',(#296125)); +#296125 = SURFACE_STYLE_FILL_AREA(#296126); +#296126 = FILL_AREA_STYLE('',(#296127)); +#296127 = FILL_AREA_STYLE_COLOUR('',#293072); +#296128 = CURVE_STYLE('',#296129,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296130 = STYLED_ITEM('color',(#296131),#82766); +#296131 = PRESENTATION_STYLE_ASSIGNMENT((#296132,#296137)); +#296132 = SURFACE_STYLE_USAGE(.BOTH.,#296133); +#296133 = SURFACE_SIDE_STYLE('',(#296134)); +#296134 = SURFACE_STYLE_FILL_AREA(#296135); +#296135 = FILL_AREA_STYLE('',(#296136)); +#296136 = FILL_AREA_STYLE_COLOUR('',#293072); +#296137 = CURVE_STYLE('',#296138,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296139 = STYLED_ITEM('color',(#296140),#82783); +#296140 = PRESENTATION_STYLE_ASSIGNMENT((#296141,#296146)); +#296141 = SURFACE_STYLE_USAGE(.BOTH.,#296142); +#296142 = SURFACE_SIDE_STYLE('',(#296143)); +#296143 = SURFACE_STYLE_FILL_AREA(#296144); +#296144 = FILL_AREA_STYLE('',(#296145)); +#296145 = FILL_AREA_STYLE_COLOUR('',#293072); +#296146 = CURVE_STYLE('',#296147,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296148 = STYLED_ITEM('color',(#296149),#82812); +#296149 = PRESENTATION_STYLE_ASSIGNMENT((#296150,#296155)); +#296150 = SURFACE_STYLE_USAGE(.BOTH.,#296151); +#296151 = SURFACE_SIDE_STYLE('',(#296152)); +#296152 = SURFACE_STYLE_FILL_AREA(#296153); +#296153 = FILL_AREA_STYLE('',(#296154)); +#296154 = FILL_AREA_STYLE_COLOUR('',#293072); +#296155 = CURVE_STYLE('',#296156,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296157 = STYLED_ITEM('color',(#296158),#82835); +#296158 = PRESENTATION_STYLE_ASSIGNMENT((#296159,#296164)); +#296159 = SURFACE_STYLE_USAGE(.BOTH.,#296160); +#296160 = SURFACE_SIDE_STYLE('',(#296161)); +#296161 = SURFACE_STYLE_FILL_AREA(#296162); +#296162 = FILL_AREA_STYLE('',(#296163)); +#296163 = FILL_AREA_STYLE_COLOUR('',#293072); +#296164 = CURVE_STYLE('',#296165,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296166 = STYLED_ITEM('color',(#296167),#82858); +#296167 = PRESENTATION_STYLE_ASSIGNMENT((#296168,#296173)); +#296168 = SURFACE_STYLE_USAGE(.BOTH.,#296169); +#296169 = SURFACE_SIDE_STYLE('',(#296170)); +#296170 = SURFACE_STYLE_FILL_AREA(#296171); +#296171 = FILL_AREA_STYLE('',(#296172)); +#296172 = FILL_AREA_STYLE_COLOUR('',#293072); +#296173 = CURVE_STYLE('',#296174,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296175 = STYLED_ITEM('color',(#296176),#82875); +#296176 = PRESENTATION_STYLE_ASSIGNMENT((#296177,#296182)); +#296177 = SURFACE_STYLE_USAGE(.BOTH.,#296178); +#296178 = SURFACE_SIDE_STYLE('',(#296179)); +#296179 = SURFACE_STYLE_FILL_AREA(#296180); +#296180 = FILL_AREA_STYLE('',(#296181)); +#296181 = FILL_AREA_STYLE_COLOUR('',#293072); +#296182 = CURVE_STYLE('',#296183,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296184 = STYLED_ITEM('color',(#296185),#82904); +#296185 = PRESENTATION_STYLE_ASSIGNMENT((#296186,#296191)); +#296186 = SURFACE_STYLE_USAGE(.BOTH.,#296187); +#296187 = SURFACE_SIDE_STYLE('',(#296188)); +#296188 = SURFACE_STYLE_FILL_AREA(#296189); +#296189 = FILL_AREA_STYLE('',(#296190)); +#296190 = FILL_AREA_STYLE_COLOUR('',#293072); +#296191 = CURVE_STYLE('',#296192,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296193 = STYLED_ITEM('color',(#296194),#82927); +#296194 = PRESENTATION_STYLE_ASSIGNMENT((#296195,#296200)); +#296195 = SURFACE_STYLE_USAGE(.BOTH.,#296196); +#296196 = SURFACE_SIDE_STYLE('',(#296197)); +#296197 = SURFACE_STYLE_FILL_AREA(#296198); +#296198 = FILL_AREA_STYLE('',(#296199)); +#296199 = FILL_AREA_STYLE_COLOUR('',#293072); +#296200 = CURVE_STYLE('',#296201,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296202 = STYLED_ITEM('color',(#296203),#82950); +#296203 = PRESENTATION_STYLE_ASSIGNMENT((#296204,#296209)); +#296204 = SURFACE_STYLE_USAGE(.BOTH.,#296205); +#296205 = SURFACE_SIDE_STYLE('',(#296206)); +#296206 = SURFACE_STYLE_FILL_AREA(#296207); +#296207 = FILL_AREA_STYLE('',(#296208)); +#296208 = FILL_AREA_STYLE_COLOUR('',#293072); +#296209 = CURVE_STYLE('',#296210,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296211 = STYLED_ITEM('color',(#296212),#82967); +#296212 = PRESENTATION_STYLE_ASSIGNMENT((#296213,#296218)); +#296213 = SURFACE_STYLE_USAGE(.BOTH.,#296214); +#296214 = SURFACE_SIDE_STYLE('',(#296215)); +#296215 = SURFACE_STYLE_FILL_AREA(#296216); +#296216 = FILL_AREA_STYLE('',(#296217)); +#296217 = FILL_AREA_STYLE_COLOUR('',#293072); +#296218 = CURVE_STYLE('',#296219,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296220 = STYLED_ITEM('color',(#296221),#82996); +#296221 = PRESENTATION_STYLE_ASSIGNMENT((#296222,#296227)); +#296222 = SURFACE_STYLE_USAGE(.BOTH.,#296223); +#296223 = SURFACE_SIDE_STYLE('',(#296224)); +#296224 = SURFACE_STYLE_FILL_AREA(#296225); +#296225 = FILL_AREA_STYLE('',(#296226)); +#296226 = FILL_AREA_STYLE_COLOUR('',#293072); +#296227 = CURVE_STYLE('',#296228,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296229 = STYLED_ITEM('color',(#296230),#83019); +#296230 = PRESENTATION_STYLE_ASSIGNMENT((#296231,#296236)); +#296231 = SURFACE_STYLE_USAGE(.BOTH.,#296232); +#296232 = SURFACE_SIDE_STYLE('',(#296233)); +#296233 = SURFACE_STYLE_FILL_AREA(#296234); +#296234 = FILL_AREA_STYLE('',(#296235)); +#296235 = FILL_AREA_STYLE_COLOUR('',#293072); +#296236 = CURVE_STYLE('',#296237,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296238 = STYLED_ITEM('color',(#296239),#83042); +#296239 = PRESENTATION_STYLE_ASSIGNMENT((#296240,#296245)); +#296240 = SURFACE_STYLE_USAGE(.BOTH.,#296241); +#296241 = SURFACE_SIDE_STYLE('',(#296242)); +#296242 = SURFACE_STYLE_FILL_AREA(#296243); +#296243 = FILL_AREA_STYLE('',(#296244)); +#296244 = FILL_AREA_STYLE_COLOUR('',#293072); +#296245 = CURVE_STYLE('',#296246,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296247 = STYLED_ITEM('color',(#296248),#83059); +#296248 = PRESENTATION_STYLE_ASSIGNMENT((#296249,#296254)); +#296249 = SURFACE_STYLE_USAGE(.BOTH.,#296250); +#296250 = SURFACE_SIDE_STYLE('',(#296251)); +#296251 = SURFACE_STYLE_FILL_AREA(#296252); +#296252 = FILL_AREA_STYLE('',(#296253)); +#296253 = FILL_AREA_STYLE_COLOUR('',#293072); +#296254 = CURVE_STYLE('',#296255,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296256 = STYLED_ITEM('color',(#296257),#83088); +#296257 = PRESENTATION_STYLE_ASSIGNMENT((#296258,#296263)); +#296258 = SURFACE_STYLE_USAGE(.BOTH.,#296259); +#296259 = SURFACE_SIDE_STYLE('',(#296260)); +#296260 = SURFACE_STYLE_FILL_AREA(#296261); +#296261 = FILL_AREA_STYLE('',(#296262)); +#296262 = FILL_AREA_STYLE_COLOUR('',#293072); +#296263 = CURVE_STYLE('',#296264,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296265 = STYLED_ITEM('color',(#296266),#83111); +#296266 = PRESENTATION_STYLE_ASSIGNMENT((#296267,#296272)); +#296267 = SURFACE_STYLE_USAGE(.BOTH.,#296268); +#296268 = SURFACE_SIDE_STYLE('',(#296269)); +#296269 = SURFACE_STYLE_FILL_AREA(#296270); +#296270 = FILL_AREA_STYLE('',(#296271)); +#296271 = FILL_AREA_STYLE_COLOUR('',#293072); +#296272 = CURVE_STYLE('',#296273,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296274 = STYLED_ITEM('color',(#296275),#83134); +#296275 = PRESENTATION_STYLE_ASSIGNMENT((#296276,#296281)); +#296276 = SURFACE_STYLE_USAGE(.BOTH.,#296277); +#296277 = SURFACE_SIDE_STYLE('',(#296278)); +#296278 = SURFACE_STYLE_FILL_AREA(#296279); +#296279 = FILL_AREA_STYLE('',(#296280)); +#296280 = FILL_AREA_STYLE_COLOUR('',#293072); +#296281 = CURVE_STYLE('',#296282,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296283 = STYLED_ITEM('color',(#296284),#83151); +#296284 = PRESENTATION_STYLE_ASSIGNMENT((#296285,#296290)); +#296285 = SURFACE_STYLE_USAGE(.BOTH.,#296286); +#296286 = SURFACE_SIDE_STYLE('',(#296287)); +#296287 = SURFACE_STYLE_FILL_AREA(#296288); +#296288 = FILL_AREA_STYLE('',(#296289)); +#296289 = FILL_AREA_STYLE_COLOUR('',#293072); +#296290 = CURVE_STYLE('',#296291,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296292 = STYLED_ITEM('color',(#296293),#83163); +#296293 = PRESENTATION_STYLE_ASSIGNMENT((#296294,#296299)); +#296294 = SURFACE_STYLE_USAGE(.BOTH.,#296295); +#296295 = SURFACE_SIDE_STYLE('',(#296296)); +#296296 = SURFACE_STYLE_FILL_AREA(#296297); +#296297 = FILL_AREA_STYLE('',(#296298)); +#296298 = FILL_AREA_STYLE_COLOUR('',#282540); +#296299 = CURVE_STYLE('',#296300,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296301 = STYLED_ITEM('color',(#296302),#83175); +#296302 = PRESENTATION_STYLE_ASSIGNMENT((#296303,#296308)); +#296303 = SURFACE_STYLE_USAGE(.BOTH.,#296304); +#296304 = SURFACE_SIDE_STYLE('',(#296305)); +#296305 = SURFACE_STYLE_FILL_AREA(#296306); +#296306 = FILL_AREA_STYLE('',(#296307)); +#296307 = FILL_AREA_STYLE_COLOUR('',#282540); +#296308 = CURVE_STYLE('',#296309,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296310 = STYLED_ITEM('color',(#296311),#83187); +#296311 = PRESENTATION_STYLE_ASSIGNMENT((#296312,#296317)); +#296312 = SURFACE_STYLE_USAGE(.BOTH.,#296313); +#296313 = SURFACE_SIDE_STYLE('',(#296314)); +#296314 = SURFACE_STYLE_FILL_AREA(#296315); +#296315 = FILL_AREA_STYLE('',(#296316)); +#296316 = FILL_AREA_STYLE_COLOUR('',#282540); +#296317 = CURVE_STYLE('',#296318,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296319 = STYLED_ITEM('color',(#296320),#83199); +#296320 = PRESENTATION_STYLE_ASSIGNMENT((#296321,#296326)); +#296321 = SURFACE_STYLE_USAGE(.BOTH.,#296322); +#296322 = SURFACE_SIDE_STYLE('',(#296323)); +#296323 = SURFACE_STYLE_FILL_AREA(#296324); +#296324 = FILL_AREA_STYLE('',(#296325)); +#296325 = FILL_AREA_STYLE_COLOUR('',#282540); +#296326 = CURVE_STYLE('',#296327,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296328 = STYLED_ITEM('color',(#296329),#83211); +#296329 = PRESENTATION_STYLE_ASSIGNMENT((#296330,#296335)); +#296330 = SURFACE_STYLE_USAGE(.BOTH.,#296331); +#296331 = SURFACE_SIDE_STYLE('',(#296332)); +#296332 = SURFACE_STYLE_FILL_AREA(#296333); +#296333 = FILL_AREA_STYLE('',(#296334)); +#296334 = FILL_AREA_STYLE_COLOUR('',#282540); +#296335 = CURVE_STYLE('',#296336,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296337 = STYLED_ITEM('color',(#296338),#83223); +#296338 = PRESENTATION_STYLE_ASSIGNMENT((#296339,#296344)); +#296339 = SURFACE_STYLE_USAGE(.BOTH.,#296340); +#296340 = SURFACE_SIDE_STYLE('',(#296341)); +#296341 = SURFACE_STYLE_FILL_AREA(#296342); +#296342 = FILL_AREA_STYLE('',(#296343)); +#296343 = FILL_AREA_STYLE_COLOUR('',#293072); +#296344 = CURVE_STYLE('',#296345,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296346 = STYLED_ITEM('color',(#296347),#83334); +#296347 = PRESENTATION_STYLE_ASSIGNMENT((#296348,#296353)); +#296348 = SURFACE_STYLE_USAGE(.BOTH.,#296349); +#296349 = SURFACE_SIDE_STYLE('',(#296350)); +#296350 = SURFACE_STYLE_FILL_AREA(#296351); +#296351 = FILL_AREA_STYLE('',(#296352)); +#296352 = FILL_AREA_STYLE_COLOUR('',#293072); +#296353 = CURVE_STYLE('',#296354,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296355 = STYLED_ITEM('color',(#296356),#83445); +#296356 = PRESENTATION_STYLE_ASSIGNMENT((#296357,#296362)); +#296357 = SURFACE_STYLE_USAGE(.BOTH.,#296358); +#296358 = SURFACE_SIDE_STYLE('',(#296359)); +#296359 = SURFACE_STYLE_FILL_AREA(#296360); +#296360 = FILL_AREA_STYLE('',(#296361)); +#296361 = FILL_AREA_STYLE_COLOUR('',#293072); +#296362 = CURVE_STYLE('',#296363,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296364 = STYLED_ITEM('color',(#296365),#83556); +#296365 = PRESENTATION_STYLE_ASSIGNMENT((#296366,#296371)); +#296366 = SURFACE_STYLE_USAGE(.BOTH.,#296367); +#296367 = SURFACE_SIDE_STYLE('',(#296368)); +#296368 = SURFACE_STYLE_FILL_AREA(#296369); +#296369 = FILL_AREA_STYLE('',(#296370)); +#296370 = FILL_AREA_STYLE_COLOUR('',#293072); +#296371 = CURVE_STYLE('',#296372,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296373 = STYLED_ITEM('color',(#296374),#83667); +#296374 = PRESENTATION_STYLE_ASSIGNMENT((#296375,#296380)); +#296375 = SURFACE_STYLE_USAGE(.BOTH.,#296376); +#296376 = SURFACE_SIDE_STYLE('',(#296377)); +#296377 = SURFACE_STYLE_FILL_AREA(#296378); +#296378 = FILL_AREA_STYLE('',(#296379)); +#296379 = FILL_AREA_STYLE_COLOUR('',#293072); +#296380 = CURVE_STYLE('',#296381,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296382 = STYLED_ITEM('color',(#296383),#83778); +#296383 = PRESENTATION_STYLE_ASSIGNMENT((#296384,#296389)); +#296384 = SURFACE_STYLE_USAGE(.BOTH.,#296385); +#296385 = SURFACE_SIDE_STYLE('',(#296386)); +#296386 = SURFACE_STYLE_FILL_AREA(#296387); +#296387 = FILL_AREA_STYLE('',(#296388)); +#296388 = FILL_AREA_STYLE_COLOUR('',#293072); +#296389 = CURVE_STYLE('',#296390,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296391 = STYLED_ITEM('color',(#296392),#83809); +#296392 = PRESENTATION_STYLE_ASSIGNMENT((#296393,#296398)); +#296393 = SURFACE_STYLE_USAGE(.BOTH.,#296394); +#296394 = SURFACE_SIDE_STYLE('',(#296395)); +#296395 = SURFACE_STYLE_FILL_AREA(#296396); +#296396 = FILL_AREA_STYLE('',(#296397)); +#296397 = FILL_AREA_STYLE_COLOUR('',#293072); +#296398 = CURVE_STYLE('',#296399,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296400 = STYLED_ITEM('color',(#296401),#83833); +#296401 = PRESENTATION_STYLE_ASSIGNMENT((#296402,#296407)); +#296402 = SURFACE_STYLE_USAGE(.BOTH.,#296403); +#296403 = SURFACE_SIDE_STYLE('',(#296404)); +#296404 = SURFACE_STYLE_FILL_AREA(#296405); +#296405 = FILL_AREA_STYLE('',(#296406)); +#296406 = FILL_AREA_STYLE_COLOUR('',#293072); +#296407 = CURVE_STYLE('',#296408,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296409 = STYLED_ITEM('color',(#296410),#83857); +#296410 = PRESENTATION_STYLE_ASSIGNMENT((#296411,#296416)); +#296411 = SURFACE_STYLE_USAGE(.BOTH.,#296412); +#296412 = SURFACE_SIDE_STYLE('',(#296413)); +#296413 = SURFACE_STYLE_FILL_AREA(#296414); +#296414 = FILL_AREA_STYLE('',(#296415)); +#296415 = FILL_AREA_STYLE_COLOUR('',#293072); +#296416 = CURVE_STYLE('',#296417,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296418 = STYLED_ITEM('color',(#296419),#83881); +#296419 = PRESENTATION_STYLE_ASSIGNMENT((#296420,#296425)); +#296420 = SURFACE_STYLE_USAGE(.BOTH.,#296421); +#296421 = SURFACE_SIDE_STYLE('',(#296422)); +#296422 = SURFACE_STYLE_FILL_AREA(#296423); +#296423 = FILL_AREA_STYLE('',(#296424)); +#296424 = FILL_AREA_STYLE_COLOUR('',#293072); +#296425 = CURVE_STYLE('',#296426,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296427 = STYLED_ITEM('color',(#296428),#83912); +#296428 = PRESENTATION_STYLE_ASSIGNMENT((#296429,#296434)); +#296429 = SURFACE_STYLE_USAGE(.BOTH.,#296430); +#296430 = SURFACE_SIDE_STYLE('',(#296431)); +#296431 = SURFACE_STYLE_FILL_AREA(#296432); +#296432 = FILL_AREA_STYLE('',(#296433)); +#296433 = FILL_AREA_STYLE_COLOUR('',#293072); +#296434 = CURVE_STYLE('',#296435,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296436 = STYLED_ITEM('color',(#296437),#83936); +#296437 = PRESENTATION_STYLE_ASSIGNMENT((#296438,#296443)); +#296438 = SURFACE_STYLE_USAGE(.BOTH.,#296439); +#296439 = SURFACE_SIDE_STYLE('',(#296440)); +#296440 = SURFACE_STYLE_FILL_AREA(#296441); +#296441 = FILL_AREA_STYLE('',(#296442)); +#296442 = FILL_AREA_STYLE_COLOUR('',#293072); +#296443 = CURVE_STYLE('',#296444,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296445 = STYLED_ITEM('color',(#296446),#83960); +#296446 = PRESENTATION_STYLE_ASSIGNMENT((#296447,#296452)); +#296447 = SURFACE_STYLE_USAGE(.BOTH.,#296448); +#296448 = SURFACE_SIDE_STYLE('',(#296449)); +#296449 = SURFACE_STYLE_FILL_AREA(#296450); +#296450 = FILL_AREA_STYLE('',(#296451)); +#296451 = FILL_AREA_STYLE_COLOUR('',#293072); +#296452 = CURVE_STYLE('',#296453,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296454 = STYLED_ITEM('color',(#296455),#83984); +#296455 = PRESENTATION_STYLE_ASSIGNMENT((#296456,#296461)); +#296456 = SURFACE_STYLE_USAGE(.BOTH.,#296457); +#296457 = SURFACE_SIDE_STYLE('',(#296458)); +#296458 = SURFACE_STYLE_FILL_AREA(#296459); +#296459 = FILL_AREA_STYLE('',(#296460)); +#296460 = FILL_AREA_STYLE_COLOUR('',#293072); +#296461 = CURVE_STYLE('',#296462,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296463 = STYLED_ITEM('color',(#296464),#84015); +#296464 = PRESENTATION_STYLE_ASSIGNMENT((#296465,#296470)); +#296465 = SURFACE_STYLE_USAGE(.BOTH.,#296466); +#296466 = SURFACE_SIDE_STYLE('',(#296467)); +#296467 = SURFACE_STYLE_FILL_AREA(#296468); +#296468 = FILL_AREA_STYLE('',(#296469)); +#296469 = FILL_AREA_STYLE_COLOUR('',#293072); +#296470 = CURVE_STYLE('',#296471,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296472 = STYLED_ITEM('color',(#296473),#84039); +#296473 = PRESENTATION_STYLE_ASSIGNMENT((#296474,#296479)); +#296474 = SURFACE_STYLE_USAGE(.BOTH.,#296475); +#296475 = SURFACE_SIDE_STYLE('',(#296476)); +#296476 = SURFACE_STYLE_FILL_AREA(#296477); +#296477 = FILL_AREA_STYLE('',(#296478)); +#296478 = FILL_AREA_STYLE_COLOUR('',#293072); +#296479 = CURVE_STYLE('',#296480,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296481 = STYLED_ITEM('color',(#296482),#84063); +#296482 = PRESENTATION_STYLE_ASSIGNMENT((#296483,#296488)); +#296483 = SURFACE_STYLE_USAGE(.BOTH.,#296484); +#296484 = SURFACE_SIDE_STYLE('',(#296485)); +#296485 = SURFACE_STYLE_FILL_AREA(#296486); +#296486 = FILL_AREA_STYLE('',(#296487)); +#296487 = FILL_AREA_STYLE_COLOUR('',#293072); +#296488 = CURVE_STYLE('',#296489,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296490 = STYLED_ITEM('color',(#296491),#84087); +#296491 = PRESENTATION_STYLE_ASSIGNMENT((#296492,#296497)); +#296492 = SURFACE_STYLE_USAGE(.BOTH.,#296493); +#296493 = SURFACE_SIDE_STYLE('',(#296494)); +#296494 = SURFACE_STYLE_FILL_AREA(#296495); +#296495 = FILL_AREA_STYLE('',(#296496)); +#296496 = FILL_AREA_STYLE_COLOUR('',#293072); +#296497 = CURVE_STYLE('',#296498,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296499 = STYLED_ITEM('color',(#296500),#84118); +#296500 = PRESENTATION_STYLE_ASSIGNMENT((#296501,#296506)); +#296501 = SURFACE_STYLE_USAGE(.BOTH.,#296502); +#296502 = SURFACE_SIDE_STYLE('',(#296503)); +#296503 = SURFACE_STYLE_FILL_AREA(#296504); +#296504 = FILL_AREA_STYLE('',(#296505)); +#296505 = FILL_AREA_STYLE_COLOUR('',#293072); +#296506 = CURVE_STYLE('',#296507,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296508 = STYLED_ITEM('color',(#296509),#84142); +#296509 = PRESENTATION_STYLE_ASSIGNMENT((#296510,#296515)); +#296510 = SURFACE_STYLE_USAGE(.BOTH.,#296511); +#296511 = SURFACE_SIDE_STYLE('',(#296512)); +#296512 = SURFACE_STYLE_FILL_AREA(#296513); +#296513 = FILL_AREA_STYLE('',(#296514)); +#296514 = FILL_AREA_STYLE_COLOUR('',#293072); +#296515 = CURVE_STYLE('',#296516,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296517 = STYLED_ITEM('color',(#296518),#84166); +#296518 = PRESENTATION_STYLE_ASSIGNMENT((#296519,#296524)); +#296519 = SURFACE_STYLE_USAGE(.BOTH.,#296520); +#296520 = SURFACE_SIDE_STYLE('',(#296521)); +#296521 = SURFACE_STYLE_FILL_AREA(#296522); +#296522 = FILL_AREA_STYLE('',(#296523)); +#296523 = FILL_AREA_STYLE_COLOUR('',#293072); +#296524 = CURVE_STYLE('',#296525,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296526 = STYLED_ITEM('color',(#296527),#84190); +#296527 = PRESENTATION_STYLE_ASSIGNMENT((#296528,#296533)); +#296528 = SURFACE_STYLE_USAGE(.BOTH.,#296529); +#296529 = SURFACE_SIDE_STYLE('',(#296530)); +#296530 = SURFACE_STYLE_FILL_AREA(#296531); +#296531 = FILL_AREA_STYLE('',(#296532)); +#296532 = FILL_AREA_STYLE_COLOUR('',#293072); +#296533 = CURVE_STYLE('',#296534,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296535 = STYLED_ITEM('color',(#296536),#84221); +#296536 = PRESENTATION_STYLE_ASSIGNMENT((#296537,#296542)); +#296537 = SURFACE_STYLE_USAGE(.BOTH.,#296538); +#296538 = SURFACE_SIDE_STYLE('',(#296539)); +#296539 = SURFACE_STYLE_FILL_AREA(#296540); +#296540 = FILL_AREA_STYLE('',(#296541)); +#296541 = FILL_AREA_STYLE_COLOUR('',#293072); +#296542 = CURVE_STYLE('',#296543,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296544 = STYLED_ITEM('color',(#296545),#84245); +#296545 = PRESENTATION_STYLE_ASSIGNMENT((#296546,#296551)); +#296546 = SURFACE_STYLE_USAGE(.BOTH.,#296547); +#296547 = SURFACE_SIDE_STYLE('',(#296548)); +#296548 = SURFACE_STYLE_FILL_AREA(#296549); +#296549 = FILL_AREA_STYLE('',(#296550)); +#296550 = FILL_AREA_STYLE_COLOUR('',#293072); +#296551 = CURVE_STYLE('',#296552,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296553 = STYLED_ITEM('color',(#296554),#84269); +#296554 = PRESENTATION_STYLE_ASSIGNMENT((#296555,#296560)); +#296555 = SURFACE_STYLE_USAGE(.BOTH.,#296556); +#296556 = SURFACE_SIDE_STYLE('',(#296557)); +#296557 = SURFACE_STYLE_FILL_AREA(#296558); +#296558 = FILL_AREA_STYLE('',(#296559)); +#296559 = FILL_AREA_STYLE_COLOUR('',#293072); +#296560 = CURVE_STYLE('',#296561,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296562 = STYLED_ITEM('color',(#296563),#84293); +#296563 = PRESENTATION_STYLE_ASSIGNMENT((#296564,#296569)); +#296564 = SURFACE_STYLE_USAGE(.BOTH.,#296565); +#296565 = SURFACE_SIDE_STYLE('',(#296566)); +#296566 = SURFACE_STYLE_FILL_AREA(#296567); +#296567 = FILL_AREA_STYLE('',(#296568)); +#296568 = FILL_AREA_STYLE_COLOUR('',#293072); +#296569 = CURVE_STYLE('',#296570,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296571 = STYLED_ITEM('color',(#296572),#84309); +#296572 = PRESENTATION_STYLE_ASSIGNMENT((#296573,#296578)); +#296573 = SURFACE_STYLE_USAGE(.BOTH.,#296574); +#296574 = SURFACE_SIDE_STYLE('',(#296575)); +#296575 = SURFACE_STYLE_FILL_AREA(#296576); +#296576 = FILL_AREA_STYLE('',(#296577)); +#296577 = FILL_AREA_STYLE_COLOUR('',#282540); +#296578 = CURVE_STYLE('',#296579,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296580 = STYLED_ITEM('color',(#296581),#84342); +#296581 = PRESENTATION_STYLE_ASSIGNMENT((#296582,#296587)); +#296582 = SURFACE_STYLE_USAGE(.BOTH.,#296583); +#296583 = SURFACE_SIDE_STYLE('',(#296584)); +#296584 = SURFACE_STYLE_FILL_AREA(#296585); +#296585 = FILL_AREA_STYLE('',(#296586)); +#296586 = FILL_AREA_STYLE_COLOUR('',#282540); +#296587 = CURVE_STYLE('',#296588,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296589 = STYLED_ITEM('color',(#296590),#84367); +#296590 = PRESENTATION_STYLE_ASSIGNMENT((#296591,#296596)); +#296591 = SURFACE_STYLE_USAGE(.BOTH.,#296592); +#296592 = SURFACE_SIDE_STYLE('',(#296593)); +#296593 = SURFACE_STYLE_FILL_AREA(#296594); +#296594 = FILL_AREA_STYLE('',(#296595)); +#296595 = FILL_AREA_STYLE_COLOUR('',#282540); +#296596 = CURVE_STYLE('',#296597,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296598 = STYLED_ITEM('color',(#296599),#84399); +#296599 = PRESENTATION_STYLE_ASSIGNMENT((#296600,#296605)); +#296600 = SURFACE_STYLE_USAGE(.BOTH.,#296601); +#296601 = SURFACE_SIDE_STYLE('',(#296602)); +#296602 = SURFACE_STYLE_FILL_AREA(#296603); +#296603 = FILL_AREA_STYLE('',(#296604)); +#296604 = FILL_AREA_STYLE_COLOUR('',#282540); +#296605 = CURVE_STYLE('',#296606,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296607 = STYLED_ITEM('color',(#296608),#84430); +#296608 = PRESENTATION_STYLE_ASSIGNMENT((#296609,#296614)); +#296609 = SURFACE_STYLE_USAGE(.BOTH.,#296610); +#296610 = SURFACE_SIDE_STYLE('',(#296611)); +#296611 = SURFACE_STYLE_FILL_AREA(#296612); +#296612 = FILL_AREA_STYLE('',(#296613)); +#296613 = FILL_AREA_STYLE_COLOUR('',#293072); +#296614 = CURVE_STYLE('',#296615,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296616 = STYLED_ITEM('color',(#296617),#84440); +#296617 = PRESENTATION_STYLE_ASSIGNMENT((#296618,#296623)); +#296618 = SURFACE_STYLE_USAGE(.BOTH.,#296619); +#296619 = SURFACE_SIDE_STYLE('',(#296620)); +#296620 = SURFACE_STYLE_FILL_AREA(#296621); +#296621 = FILL_AREA_STYLE('',(#296622)); +#296622 = FILL_AREA_STYLE_COLOUR('',#282540); +#296623 = CURVE_STYLE('',#296624,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296625 = STYLED_ITEM('color',(#296626),#84458); +#296626 = PRESENTATION_STYLE_ASSIGNMENT((#296627,#296632)); +#296627 = SURFACE_STYLE_USAGE(.BOTH.,#296628); +#296628 = SURFACE_SIDE_STYLE('',(#296629)); +#296629 = SURFACE_STYLE_FILL_AREA(#296630); +#296630 = FILL_AREA_STYLE('',(#296631)); +#296631 = FILL_AREA_STYLE_COLOUR('',#293072); +#296632 = CURVE_STYLE('',#296633,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296634 = STYLED_ITEM('color',(#296635),#84474); +#296635 = PRESENTATION_STYLE_ASSIGNMENT((#296636,#296641)); +#296636 = SURFACE_STYLE_USAGE(.BOTH.,#296637); +#296637 = SURFACE_SIDE_STYLE('',(#296638)); +#296638 = SURFACE_STYLE_FILL_AREA(#296639); +#296639 = FILL_AREA_STYLE('',(#296640)); +#296640 = FILL_AREA_STYLE_COLOUR('',#282540); +#296641 = CURVE_STYLE('',#296642,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296643 = STYLED_ITEM('color',(#296644),#84507); +#296644 = PRESENTATION_STYLE_ASSIGNMENT((#296645,#296650)); +#296645 = SURFACE_STYLE_USAGE(.BOTH.,#296646); +#296646 = SURFACE_SIDE_STYLE('',(#296647)); +#296647 = SURFACE_STYLE_FILL_AREA(#296648); +#296648 = FILL_AREA_STYLE('',(#296649)); +#296649 = FILL_AREA_STYLE_COLOUR('',#282540); +#296650 = CURVE_STYLE('',#296651,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296652 = STYLED_ITEM('color',(#296653),#84532); +#296653 = PRESENTATION_STYLE_ASSIGNMENT((#296654,#296659)); +#296654 = SURFACE_STYLE_USAGE(.BOTH.,#296655); +#296655 = SURFACE_SIDE_STYLE('',(#296656)); +#296656 = SURFACE_STYLE_FILL_AREA(#296657); +#296657 = FILL_AREA_STYLE('',(#296658)); +#296658 = FILL_AREA_STYLE_COLOUR('',#282540); +#296659 = CURVE_STYLE('',#296660,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296661 = STYLED_ITEM('color',(#296662),#84564); +#296662 = PRESENTATION_STYLE_ASSIGNMENT((#296663,#296668)); +#296663 = SURFACE_STYLE_USAGE(.BOTH.,#296664); +#296664 = SURFACE_SIDE_STYLE('',(#296665)); +#296665 = SURFACE_STYLE_FILL_AREA(#296666); +#296666 = FILL_AREA_STYLE('',(#296667)); +#296667 = FILL_AREA_STYLE_COLOUR('',#282540); +#296668 = CURVE_STYLE('',#296669,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296670 = STYLED_ITEM('color',(#296671),#84595); +#296671 = PRESENTATION_STYLE_ASSIGNMENT((#296672,#296677)); +#296672 = SURFACE_STYLE_USAGE(.BOTH.,#296673); +#296673 = SURFACE_SIDE_STYLE('',(#296674)); +#296674 = SURFACE_STYLE_FILL_AREA(#296675); +#296675 = FILL_AREA_STYLE('',(#296676)); +#296676 = FILL_AREA_STYLE_COLOUR('',#293072); +#296677 = CURVE_STYLE('',#296678,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296679 = STYLED_ITEM('color',(#296680),#84605); +#296680 = PRESENTATION_STYLE_ASSIGNMENT((#296681,#296686)); +#296681 = SURFACE_STYLE_USAGE(.BOTH.,#296682); +#296682 = SURFACE_SIDE_STYLE('',(#296683)); +#296683 = SURFACE_STYLE_FILL_AREA(#296684); +#296684 = FILL_AREA_STYLE('',(#296685)); +#296685 = FILL_AREA_STYLE_COLOUR('',#282540); +#296686 = CURVE_STYLE('',#296687,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296688 = STYLED_ITEM('color',(#296689),#84623); +#296689 = PRESENTATION_STYLE_ASSIGNMENT((#296690,#296695)); +#296690 = SURFACE_STYLE_USAGE(.BOTH.,#296691); +#296691 = SURFACE_SIDE_STYLE('',(#296692)); +#296692 = SURFACE_STYLE_FILL_AREA(#296693); +#296693 = FILL_AREA_STYLE('',(#296694)); +#296694 = FILL_AREA_STYLE_COLOUR('',#293072); +#296695 = CURVE_STYLE('',#296696,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296697 = STYLED_ITEM('color',(#296698),#84639); +#296698 = PRESENTATION_STYLE_ASSIGNMENT((#296699,#296704)); +#296699 = SURFACE_STYLE_USAGE(.BOTH.,#296700); +#296700 = SURFACE_SIDE_STYLE('',(#296701)); +#296701 = SURFACE_STYLE_FILL_AREA(#296702); +#296702 = FILL_AREA_STYLE('',(#296703)); +#296703 = FILL_AREA_STYLE_COLOUR('',#282540); +#296704 = CURVE_STYLE('',#296705,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296706 = STYLED_ITEM('color',(#296707),#84672); +#296707 = PRESENTATION_STYLE_ASSIGNMENT((#296708,#296713)); +#296708 = SURFACE_STYLE_USAGE(.BOTH.,#296709); +#296709 = SURFACE_SIDE_STYLE('',(#296710)); +#296710 = SURFACE_STYLE_FILL_AREA(#296711); +#296711 = FILL_AREA_STYLE('',(#296712)); +#296712 = FILL_AREA_STYLE_COLOUR('',#282540); +#296713 = CURVE_STYLE('',#296714,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296715 = STYLED_ITEM('color',(#296716),#84697); +#296716 = PRESENTATION_STYLE_ASSIGNMENT((#296717,#296722)); +#296717 = SURFACE_STYLE_USAGE(.BOTH.,#296718); +#296718 = SURFACE_SIDE_STYLE('',(#296719)); +#296719 = SURFACE_STYLE_FILL_AREA(#296720); +#296720 = FILL_AREA_STYLE('',(#296721)); +#296721 = FILL_AREA_STYLE_COLOUR('',#282540); +#296722 = CURVE_STYLE('',#296723,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296724 = STYLED_ITEM('color',(#296725),#84729); +#296725 = PRESENTATION_STYLE_ASSIGNMENT((#296726,#296731)); +#296726 = SURFACE_STYLE_USAGE(.BOTH.,#296727); +#296727 = SURFACE_SIDE_STYLE('',(#296728)); +#296728 = SURFACE_STYLE_FILL_AREA(#296729); +#296729 = FILL_AREA_STYLE('',(#296730)); +#296730 = FILL_AREA_STYLE_COLOUR('',#282540); +#296731 = CURVE_STYLE('',#296732,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296733 = STYLED_ITEM('color',(#296734),#84760); +#296734 = PRESENTATION_STYLE_ASSIGNMENT((#296735,#296740)); +#296735 = SURFACE_STYLE_USAGE(.BOTH.,#296736); +#296736 = SURFACE_SIDE_STYLE('',(#296737)); +#296737 = SURFACE_STYLE_FILL_AREA(#296738); +#296738 = FILL_AREA_STYLE('',(#296739)); +#296739 = FILL_AREA_STYLE_COLOUR('',#293072); +#296740 = CURVE_STYLE('',#296741,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296742 = STYLED_ITEM('color',(#296743),#84770); +#296743 = PRESENTATION_STYLE_ASSIGNMENT((#296744,#296749)); +#296744 = SURFACE_STYLE_USAGE(.BOTH.,#296745); +#296745 = SURFACE_SIDE_STYLE('',(#296746)); +#296746 = SURFACE_STYLE_FILL_AREA(#296747); +#296747 = FILL_AREA_STYLE('',(#296748)); +#296748 = FILL_AREA_STYLE_COLOUR('',#282540); +#296749 = CURVE_STYLE('',#296750,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296751 = STYLED_ITEM('color',(#296752),#84788); +#296752 = PRESENTATION_STYLE_ASSIGNMENT((#296753,#296758)); +#296753 = SURFACE_STYLE_USAGE(.BOTH.,#296754); +#296754 = SURFACE_SIDE_STYLE('',(#296755)); +#296755 = SURFACE_STYLE_FILL_AREA(#296756); +#296756 = FILL_AREA_STYLE('',(#296757)); +#296757 = FILL_AREA_STYLE_COLOUR('',#293072); +#296758 = CURVE_STYLE('',#296759,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296760 = STYLED_ITEM('color',(#296761),#84804); +#296761 = PRESENTATION_STYLE_ASSIGNMENT((#296762,#296767)); +#296762 = SURFACE_STYLE_USAGE(.BOTH.,#296763); +#296763 = SURFACE_SIDE_STYLE('',(#296764)); +#296764 = SURFACE_STYLE_FILL_AREA(#296765); +#296765 = FILL_AREA_STYLE('',(#296766)); +#296766 = FILL_AREA_STYLE_COLOUR('',#282540); +#296767 = CURVE_STYLE('',#296768,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296769 = STYLED_ITEM('color',(#296770),#84837); +#296770 = PRESENTATION_STYLE_ASSIGNMENT((#296771,#296776)); +#296771 = SURFACE_STYLE_USAGE(.BOTH.,#296772); +#296772 = SURFACE_SIDE_STYLE('',(#296773)); +#296773 = SURFACE_STYLE_FILL_AREA(#296774); +#296774 = FILL_AREA_STYLE('',(#296775)); +#296775 = FILL_AREA_STYLE_COLOUR('',#282540); +#296776 = CURVE_STYLE('',#296777,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296778 = STYLED_ITEM('color',(#296779),#84862); +#296779 = PRESENTATION_STYLE_ASSIGNMENT((#296780,#296785)); +#296780 = SURFACE_STYLE_USAGE(.BOTH.,#296781); +#296781 = SURFACE_SIDE_STYLE('',(#296782)); +#296782 = SURFACE_STYLE_FILL_AREA(#296783); +#296783 = FILL_AREA_STYLE('',(#296784)); +#296784 = FILL_AREA_STYLE_COLOUR('',#282540); +#296785 = CURVE_STYLE('',#296786,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296787 = STYLED_ITEM('color',(#296788),#84894); +#296788 = PRESENTATION_STYLE_ASSIGNMENT((#296789,#296794)); +#296789 = SURFACE_STYLE_USAGE(.BOTH.,#296790); +#296790 = SURFACE_SIDE_STYLE('',(#296791)); +#296791 = SURFACE_STYLE_FILL_AREA(#296792); +#296792 = FILL_AREA_STYLE('',(#296793)); +#296793 = FILL_AREA_STYLE_COLOUR('',#282540); +#296794 = CURVE_STYLE('',#296795,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296796 = STYLED_ITEM('color',(#296797),#84925); +#296797 = PRESENTATION_STYLE_ASSIGNMENT((#296798,#296803)); +#296798 = SURFACE_STYLE_USAGE(.BOTH.,#296799); +#296799 = SURFACE_SIDE_STYLE('',(#296800)); +#296800 = SURFACE_STYLE_FILL_AREA(#296801); +#296801 = FILL_AREA_STYLE('',(#296802)); +#296802 = FILL_AREA_STYLE_COLOUR('',#293072); +#296803 = CURVE_STYLE('',#296804,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296805 = STYLED_ITEM('color',(#296806),#84935); +#296806 = PRESENTATION_STYLE_ASSIGNMENT((#296807,#296812)); +#296807 = SURFACE_STYLE_USAGE(.BOTH.,#296808); +#296808 = SURFACE_SIDE_STYLE('',(#296809)); +#296809 = SURFACE_STYLE_FILL_AREA(#296810); +#296810 = FILL_AREA_STYLE('',(#296811)); +#296811 = FILL_AREA_STYLE_COLOUR('',#282540); +#296812 = CURVE_STYLE('',#296813,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296814 = STYLED_ITEM('color',(#296815),#84953); +#296815 = PRESENTATION_STYLE_ASSIGNMENT((#296816,#296821)); +#296816 = SURFACE_STYLE_USAGE(.BOTH.,#296817); +#296817 = SURFACE_SIDE_STYLE('',(#296818)); +#296818 = SURFACE_STYLE_FILL_AREA(#296819); +#296819 = FILL_AREA_STYLE('',(#296820)); +#296820 = FILL_AREA_STYLE_COLOUR('',#293072); +#296821 = CURVE_STYLE('',#296822,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296823 = STYLED_ITEM('color',(#296824),#84969); +#296824 = PRESENTATION_STYLE_ASSIGNMENT((#296825,#296830)); +#296825 = SURFACE_STYLE_USAGE(.BOTH.,#296826); +#296826 = SURFACE_SIDE_STYLE('',(#296827)); +#296827 = SURFACE_STYLE_FILL_AREA(#296828); +#296828 = FILL_AREA_STYLE('',(#296829)); +#296829 = FILL_AREA_STYLE_COLOUR('',#282540); +#296830 = CURVE_STYLE('',#296831,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296832 = STYLED_ITEM('color',(#296833),#85002); +#296833 = PRESENTATION_STYLE_ASSIGNMENT((#296834,#296839)); +#296834 = SURFACE_STYLE_USAGE(.BOTH.,#296835); +#296835 = SURFACE_SIDE_STYLE('',(#296836)); +#296836 = SURFACE_STYLE_FILL_AREA(#296837); +#296837 = FILL_AREA_STYLE('',(#296838)); +#296838 = FILL_AREA_STYLE_COLOUR('',#282540); +#296839 = CURVE_STYLE('',#296840,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296841 = STYLED_ITEM('color',(#296842),#85027); +#296842 = PRESENTATION_STYLE_ASSIGNMENT((#296843,#296848)); +#296843 = SURFACE_STYLE_USAGE(.BOTH.,#296844); +#296844 = SURFACE_SIDE_STYLE('',(#296845)); +#296845 = SURFACE_STYLE_FILL_AREA(#296846); +#296846 = FILL_AREA_STYLE('',(#296847)); +#296847 = FILL_AREA_STYLE_COLOUR('',#282540); +#296848 = CURVE_STYLE('',#296849,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296850 = STYLED_ITEM('color',(#296851),#85059); +#296851 = PRESENTATION_STYLE_ASSIGNMENT((#296852,#296857)); +#296852 = SURFACE_STYLE_USAGE(.BOTH.,#296853); +#296853 = SURFACE_SIDE_STYLE('',(#296854)); +#296854 = SURFACE_STYLE_FILL_AREA(#296855); +#296855 = FILL_AREA_STYLE('',(#296856)); +#296856 = FILL_AREA_STYLE_COLOUR('',#282540); +#296857 = CURVE_STYLE('',#296858,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296859 = STYLED_ITEM('color',(#296860),#85090); +#296860 = PRESENTATION_STYLE_ASSIGNMENT((#296861,#296866)); +#296861 = SURFACE_STYLE_USAGE(.BOTH.,#296862); +#296862 = SURFACE_SIDE_STYLE('',(#296863)); +#296863 = SURFACE_STYLE_FILL_AREA(#296864); +#296864 = FILL_AREA_STYLE('',(#296865)); +#296865 = FILL_AREA_STYLE_COLOUR('',#293072); +#296866 = CURVE_STYLE('',#296867,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#296867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296868 = STYLED_ITEM('color',(#296869),#85100); +#296869 = PRESENTATION_STYLE_ASSIGNMENT((#296870,#296875)); +#296870 = SURFACE_STYLE_USAGE(.BOTH.,#296871); +#296871 = SURFACE_SIDE_STYLE('',(#296872)); +#296872 = SURFACE_STYLE_FILL_AREA(#296873); +#296873 = FILL_AREA_STYLE('',(#296874)); +#296874 = FILL_AREA_STYLE_COLOUR('',#282540); +#296875 = CURVE_STYLE('',#296876,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296877 = STYLED_ITEM('color',(#296878),#85118); +#296878 = PRESENTATION_STYLE_ASSIGNMENT((#296879,#296884)); +#296879 = SURFACE_STYLE_USAGE(.BOTH.,#296880); +#296880 = SURFACE_SIDE_STYLE('',(#296881)); +#296881 = SURFACE_STYLE_FILL_AREA(#296882); +#296882 = FILL_AREA_STYLE('',(#296883)); +#296883 = FILL_AREA_STYLE_COLOUR('',#282540); +#296884 = CURVE_STYLE('',#296885,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296886 = STYLED_ITEM('color',(#296887),#85173); +#296887 = PRESENTATION_STYLE_ASSIGNMENT((#296888,#296893)); +#296888 = SURFACE_STYLE_USAGE(.BOTH.,#296889); +#296889 = SURFACE_SIDE_STYLE('',(#296890)); +#296890 = SURFACE_STYLE_FILL_AREA(#296891); +#296891 = FILL_AREA_STYLE('',(#296892)); +#296892 = FILL_AREA_STYLE_COLOUR('',#282540); +#296893 = CURVE_STYLE('',#296894,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296895 = STYLED_ITEM('color',(#296896),#85228); +#296896 = PRESENTATION_STYLE_ASSIGNMENT((#296897,#296902)); +#296897 = SURFACE_STYLE_USAGE(.BOTH.,#296898); +#296898 = SURFACE_SIDE_STYLE('',(#296899)); +#296899 = SURFACE_STYLE_FILL_AREA(#296900); +#296900 = FILL_AREA_STYLE('',(#296901)); +#296901 = FILL_AREA_STYLE_COLOUR('',#282540); +#296902 = CURVE_STYLE('',#296903,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296904 = STYLED_ITEM('color',(#296905),#85283); +#296905 = PRESENTATION_STYLE_ASSIGNMENT((#296906,#296911)); +#296906 = SURFACE_STYLE_USAGE(.BOTH.,#296907); +#296907 = SURFACE_SIDE_STYLE('',(#296908)); +#296908 = SURFACE_STYLE_FILL_AREA(#296909); +#296909 = FILL_AREA_STYLE('',(#296910)); +#296910 = FILL_AREA_STYLE_COLOUR('',#282540); +#296911 = CURVE_STYLE('',#296912,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296913 = STYLED_ITEM('color',(#296914),#85338); +#296914 = PRESENTATION_STYLE_ASSIGNMENT((#296915,#296920)); +#296915 = SURFACE_STYLE_USAGE(.BOTH.,#296916); +#296916 = SURFACE_SIDE_STYLE('',(#296917)); +#296917 = SURFACE_STYLE_FILL_AREA(#296918); +#296918 = FILL_AREA_STYLE('',(#296919)); +#296919 = FILL_AREA_STYLE_COLOUR('',#282540); +#296920 = CURVE_STYLE('',#296921,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296922 = STYLED_ITEM('color',(#296923),#85393); +#296923 = PRESENTATION_STYLE_ASSIGNMENT((#296924,#296929)); +#296924 = SURFACE_STYLE_USAGE(.BOTH.,#296925); +#296925 = SURFACE_SIDE_STYLE('',(#296926)); +#296926 = SURFACE_STYLE_FILL_AREA(#296927); +#296927 = FILL_AREA_STYLE('',(#296928)); +#296928 = FILL_AREA_STYLE_COLOUR('',#282540); +#296929 = CURVE_STYLE('',#296930,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296931 = STYLED_ITEM('color',(#296932),#85418); +#296932 = PRESENTATION_STYLE_ASSIGNMENT((#296933,#296938)); +#296933 = SURFACE_STYLE_USAGE(.BOTH.,#296934); +#296934 = SURFACE_SIDE_STYLE('',(#296935)); +#296935 = SURFACE_STYLE_FILL_AREA(#296936); +#296936 = FILL_AREA_STYLE('',(#296937)); +#296937 = FILL_AREA_STYLE_COLOUR('',#282540); +#296938 = CURVE_STYLE('',#296939,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296940 = STYLED_ITEM('color',(#296941),#85529); +#296941 = PRESENTATION_STYLE_ASSIGNMENT((#296942,#296947)); +#296942 = SURFACE_STYLE_USAGE(.BOTH.,#296943); +#296943 = SURFACE_SIDE_STYLE('',(#296944)); +#296944 = SURFACE_STYLE_FILL_AREA(#296945); +#296945 = FILL_AREA_STYLE('',(#296946)); +#296946 = FILL_AREA_STYLE_COLOUR('',#282540); +#296947 = CURVE_STYLE('',#296948,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296949 = STYLED_ITEM('color',(#296950),#85539); +#296950 = PRESENTATION_STYLE_ASSIGNMENT((#296951,#296956)); +#296951 = SURFACE_STYLE_USAGE(.BOTH.,#296952); +#296952 = SURFACE_SIDE_STYLE('',(#296953)); +#296953 = SURFACE_STYLE_FILL_AREA(#296954); +#296954 = FILL_AREA_STYLE('',(#296955)); +#296955 = FILL_AREA_STYLE_COLOUR('',#282540); +#296956 = CURVE_STYLE('',#296957,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296958 = STYLED_ITEM('color',(#296959),#85564); +#296959 = PRESENTATION_STYLE_ASSIGNMENT((#296960,#296965)); +#296960 = SURFACE_STYLE_USAGE(.BOTH.,#296961); +#296961 = SURFACE_SIDE_STYLE('',(#296962)); +#296962 = SURFACE_STYLE_FILL_AREA(#296963); +#296963 = FILL_AREA_STYLE('',(#296964)); +#296964 = FILL_AREA_STYLE_COLOUR('',#282540); +#296965 = CURVE_STYLE('',#296966,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296967 = STYLED_ITEM('color',(#296968),#85675); +#296968 = PRESENTATION_STYLE_ASSIGNMENT((#296969,#296974)); +#296969 = SURFACE_STYLE_USAGE(.BOTH.,#296970); +#296970 = SURFACE_SIDE_STYLE('',(#296971)); +#296971 = SURFACE_STYLE_FILL_AREA(#296972); +#296972 = FILL_AREA_STYLE('',(#296973)); +#296973 = FILL_AREA_STYLE_COLOUR('',#282540); +#296974 = CURVE_STYLE('',#296975,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296976 = STYLED_ITEM('color',(#296977),#85685); +#296977 = PRESENTATION_STYLE_ASSIGNMENT((#296978,#296983)); +#296978 = SURFACE_STYLE_USAGE(.BOTH.,#296979); +#296979 = SURFACE_SIDE_STYLE('',(#296980)); +#296980 = SURFACE_STYLE_FILL_AREA(#296981); +#296981 = FILL_AREA_STYLE('',(#296982)); +#296982 = FILL_AREA_STYLE_COLOUR('',#282540); +#296983 = CURVE_STYLE('',#296984,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296985 = STYLED_ITEM('color',(#296986),#85710); +#296986 = PRESENTATION_STYLE_ASSIGNMENT((#296987,#296992)); +#296987 = SURFACE_STYLE_USAGE(.BOTH.,#296988); +#296988 = SURFACE_SIDE_STYLE('',(#296989)); +#296989 = SURFACE_STYLE_FILL_AREA(#296990); +#296990 = FILL_AREA_STYLE('',(#296991)); +#296991 = FILL_AREA_STYLE_COLOUR('',#282540); +#296992 = CURVE_STYLE('',#296993,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#296993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296994 = STYLED_ITEM('color',(#296995),#85821); +#296995 = PRESENTATION_STYLE_ASSIGNMENT((#296996,#297001)); +#296996 = SURFACE_STYLE_USAGE(.BOTH.,#296997); +#296997 = SURFACE_SIDE_STYLE('',(#296998)); +#296998 = SURFACE_STYLE_FILL_AREA(#296999); +#296999 = FILL_AREA_STYLE('',(#297000)); +#297000 = FILL_AREA_STYLE_COLOUR('',#282540); +#297001 = CURVE_STYLE('',#297002,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297003 = STYLED_ITEM('color',(#297004),#85831); +#297004 = PRESENTATION_STYLE_ASSIGNMENT((#297005,#297010)); +#297005 = SURFACE_STYLE_USAGE(.BOTH.,#297006); +#297006 = SURFACE_SIDE_STYLE('',(#297007)); +#297007 = SURFACE_STYLE_FILL_AREA(#297008); +#297008 = FILL_AREA_STYLE('',(#297009)); +#297009 = FILL_AREA_STYLE_COLOUR('',#282540); +#297010 = CURVE_STYLE('',#297011,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297012 = STYLED_ITEM('color',(#297013),#85856); +#297013 = PRESENTATION_STYLE_ASSIGNMENT((#297014,#297019)); +#297014 = SURFACE_STYLE_USAGE(.BOTH.,#297015); +#297015 = SURFACE_SIDE_STYLE('',(#297016)); +#297016 = SURFACE_STYLE_FILL_AREA(#297017); +#297017 = FILL_AREA_STYLE('',(#297018)); +#297018 = FILL_AREA_STYLE_COLOUR('',#282540); +#297019 = CURVE_STYLE('',#297020,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297021 = STYLED_ITEM('color',(#297022),#85967); +#297022 = PRESENTATION_STYLE_ASSIGNMENT((#297023,#297028)); +#297023 = SURFACE_STYLE_USAGE(.BOTH.,#297024); +#297024 = SURFACE_SIDE_STYLE('',(#297025)); +#297025 = SURFACE_STYLE_FILL_AREA(#297026); +#297026 = FILL_AREA_STYLE('',(#297027)); +#297027 = FILL_AREA_STYLE_COLOUR('',#282540); +#297028 = CURVE_STYLE('',#297029,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297030 = STYLED_ITEM('color',(#297031),#85977); +#297031 = PRESENTATION_STYLE_ASSIGNMENT((#297032,#297037)); +#297032 = SURFACE_STYLE_USAGE(.BOTH.,#297033); +#297033 = SURFACE_SIDE_STYLE('',(#297034)); +#297034 = SURFACE_STYLE_FILL_AREA(#297035); +#297035 = FILL_AREA_STYLE('',(#297036)); +#297036 = FILL_AREA_STYLE_COLOUR('',#282540); +#297037 = CURVE_STYLE('',#297038,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297039 = STYLED_ITEM('color',(#297040),#86002); +#297040 = PRESENTATION_STYLE_ASSIGNMENT((#297041,#297046)); +#297041 = SURFACE_STYLE_USAGE(.BOTH.,#297042); +#297042 = SURFACE_SIDE_STYLE('',(#297043)); +#297043 = SURFACE_STYLE_FILL_AREA(#297044); +#297044 = FILL_AREA_STYLE('',(#297045)); +#297045 = FILL_AREA_STYLE_COLOUR('',#282540); +#297046 = CURVE_STYLE('',#297047,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297048 = STYLED_ITEM('color',(#297049),#86113); +#297049 = PRESENTATION_STYLE_ASSIGNMENT((#297050,#297055)); +#297050 = SURFACE_STYLE_USAGE(.BOTH.,#297051); +#297051 = SURFACE_SIDE_STYLE('',(#297052)); +#297052 = SURFACE_STYLE_FILL_AREA(#297053); +#297053 = FILL_AREA_STYLE('',(#297054)); +#297054 = FILL_AREA_STYLE_COLOUR('',#282540); +#297055 = CURVE_STYLE('',#297056,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297057 = STYLED_ITEM('color',(#297058),#86123); +#297058 = PRESENTATION_STYLE_ASSIGNMENT((#297059,#297064)); +#297059 = SURFACE_STYLE_USAGE(.BOTH.,#297060); +#297060 = SURFACE_SIDE_STYLE('',(#297061)); +#297061 = SURFACE_STYLE_FILL_AREA(#297062); +#297062 = FILL_AREA_STYLE('',(#297063)); +#297063 = FILL_AREA_STYLE_COLOUR('',#282540); +#297064 = CURVE_STYLE('',#297065,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297066 = STYLED_ITEM('color',(#297067),#86133); +#297067 = PRESENTATION_STYLE_ASSIGNMENT((#297068,#297073)); +#297068 = SURFACE_STYLE_USAGE(.BOTH.,#297069); +#297069 = SURFACE_SIDE_STYLE('',(#297070)); +#297070 = SURFACE_STYLE_FILL_AREA(#297071); +#297071 = FILL_AREA_STYLE('',(#297072)); +#297072 = FILL_AREA_STYLE_COLOUR('',#282540); +#297073 = CURVE_STYLE('',#297074,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297075 = STYLED_ITEM('color',(#297076),#86164); +#297076 = PRESENTATION_STYLE_ASSIGNMENT((#297077,#297082)); +#297077 = SURFACE_STYLE_USAGE(.BOTH.,#297078); +#297078 = SURFACE_SIDE_STYLE('',(#297079)); +#297079 = SURFACE_STYLE_FILL_AREA(#297080); +#297080 = FILL_AREA_STYLE('',(#297081)); +#297081 = FILL_AREA_STYLE_COLOUR('',#282540); +#297082 = CURVE_STYLE('',#297083,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297084 = STYLED_ITEM('color',(#297085),#86188); +#297085 = PRESENTATION_STYLE_ASSIGNMENT((#297086,#297091)); +#297086 = SURFACE_STYLE_USAGE(.BOTH.,#297087); +#297087 = SURFACE_SIDE_STYLE('',(#297088)); +#297088 = SURFACE_STYLE_FILL_AREA(#297089); +#297089 = FILL_AREA_STYLE('',(#297090)); +#297090 = FILL_AREA_STYLE_COLOUR('',#282540); +#297091 = CURVE_STYLE('',#297092,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297093 = STYLED_ITEM('color',(#297094),#86212); +#297094 = PRESENTATION_STYLE_ASSIGNMENT((#297095,#297100)); +#297095 = SURFACE_STYLE_USAGE(.BOTH.,#297096); +#297096 = SURFACE_SIDE_STYLE('',(#297097)); +#297097 = SURFACE_STYLE_FILL_AREA(#297098); +#297098 = FILL_AREA_STYLE('',(#297099)); +#297099 = FILL_AREA_STYLE_COLOUR('',#282540); +#297100 = CURVE_STYLE('',#297101,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297102 = STYLED_ITEM('color',(#297103),#86229); +#297103 = PRESENTATION_STYLE_ASSIGNMENT((#297104,#297109)); +#297104 = SURFACE_STYLE_USAGE(.BOTH.,#297105); +#297105 = SURFACE_SIDE_STYLE('',(#297106)); +#297106 = SURFACE_STYLE_FILL_AREA(#297107); +#297107 = FILL_AREA_STYLE('',(#297108)); +#297108 = FILL_AREA_STYLE_COLOUR('',#282540); +#297109 = CURVE_STYLE('',#297110,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297111 = STYLED_ITEM('color',(#297112),#86239); +#297112 = PRESENTATION_STYLE_ASSIGNMENT((#297113,#297118)); +#297113 = SURFACE_STYLE_USAGE(.BOTH.,#297114); +#297114 = SURFACE_SIDE_STYLE('',(#297115)); +#297115 = SURFACE_STYLE_FILL_AREA(#297116); +#297116 = FILL_AREA_STYLE('',(#297117)); +#297117 = FILL_AREA_STYLE_COLOUR('',#282540); +#297118 = CURVE_STYLE('',#297119,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297120 = STYLED_ITEM('color',(#297121),#86270); +#297121 = PRESENTATION_STYLE_ASSIGNMENT((#297122,#297127)); +#297122 = SURFACE_STYLE_USAGE(.BOTH.,#297123); +#297123 = SURFACE_SIDE_STYLE('',(#297124)); +#297124 = SURFACE_STYLE_FILL_AREA(#297125); +#297125 = FILL_AREA_STYLE('',(#297126)); +#297126 = FILL_AREA_STYLE_COLOUR('',#282540); +#297127 = CURVE_STYLE('',#297128,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297129 = STYLED_ITEM('color',(#297130),#86294); +#297130 = PRESENTATION_STYLE_ASSIGNMENT((#297131,#297136)); +#297131 = SURFACE_STYLE_USAGE(.BOTH.,#297132); +#297132 = SURFACE_SIDE_STYLE('',(#297133)); +#297133 = SURFACE_STYLE_FILL_AREA(#297134); +#297134 = FILL_AREA_STYLE('',(#297135)); +#297135 = FILL_AREA_STYLE_COLOUR('',#282540); +#297136 = CURVE_STYLE('',#297137,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297138 = STYLED_ITEM('color',(#297139),#86318); +#297139 = PRESENTATION_STYLE_ASSIGNMENT((#297140,#297145)); +#297140 = SURFACE_STYLE_USAGE(.BOTH.,#297141); +#297141 = SURFACE_SIDE_STYLE('',(#297142)); +#297142 = SURFACE_STYLE_FILL_AREA(#297143); +#297143 = FILL_AREA_STYLE('',(#297144)); +#297144 = FILL_AREA_STYLE_COLOUR('',#282540); +#297145 = CURVE_STYLE('',#297146,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297147 = STYLED_ITEM('color',(#297148),#86335); +#297148 = PRESENTATION_STYLE_ASSIGNMENT((#297149,#297154)); +#297149 = SURFACE_STYLE_USAGE(.BOTH.,#297150); +#297150 = SURFACE_SIDE_STYLE('',(#297151)); +#297151 = SURFACE_STYLE_FILL_AREA(#297152); +#297152 = FILL_AREA_STYLE('',(#297153)); +#297153 = FILL_AREA_STYLE_COLOUR('',#282540); +#297154 = CURVE_STYLE('',#297155,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297156 = STYLED_ITEM('color',(#297157),#86345); +#297157 = PRESENTATION_STYLE_ASSIGNMENT((#297158,#297163)); +#297158 = SURFACE_STYLE_USAGE(.BOTH.,#297159); +#297159 = SURFACE_SIDE_STYLE('',(#297160)); +#297160 = SURFACE_STYLE_FILL_AREA(#297161); +#297161 = FILL_AREA_STYLE('',(#297162)); +#297162 = FILL_AREA_STYLE_COLOUR('',#282540); +#297163 = CURVE_STYLE('',#297164,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297165 = STYLED_ITEM('color',(#297166),#86376); +#297166 = PRESENTATION_STYLE_ASSIGNMENT((#297167,#297172)); +#297167 = SURFACE_STYLE_USAGE(.BOTH.,#297168); +#297168 = SURFACE_SIDE_STYLE('',(#297169)); +#297169 = SURFACE_STYLE_FILL_AREA(#297170); +#297170 = FILL_AREA_STYLE('',(#297171)); +#297171 = FILL_AREA_STYLE_COLOUR('',#282540); +#297172 = CURVE_STYLE('',#297173,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297174 = STYLED_ITEM('color',(#297175),#86400); +#297175 = PRESENTATION_STYLE_ASSIGNMENT((#297176,#297181)); +#297176 = SURFACE_STYLE_USAGE(.BOTH.,#297177); +#297177 = SURFACE_SIDE_STYLE('',(#297178)); +#297178 = SURFACE_STYLE_FILL_AREA(#297179); +#297179 = FILL_AREA_STYLE('',(#297180)); +#297180 = FILL_AREA_STYLE_COLOUR('',#282540); +#297181 = CURVE_STYLE('',#297182,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297183 = STYLED_ITEM('color',(#297184),#86424); +#297184 = PRESENTATION_STYLE_ASSIGNMENT((#297185,#297190)); +#297185 = SURFACE_STYLE_USAGE(.BOTH.,#297186); +#297186 = SURFACE_SIDE_STYLE('',(#297187)); +#297187 = SURFACE_STYLE_FILL_AREA(#297188); +#297188 = FILL_AREA_STYLE('',(#297189)); +#297189 = FILL_AREA_STYLE_COLOUR('',#282540); +#297190 = CURVE_STYLE('',#297191,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297192 = STYLED_ITEM('color',(#297193),#86441); +#297193 = PRESENTATION_STYLE_ASSIGNMENT((#297194,#297199)); +#297194 = SURFACE_STYLE_USAGE(.BOTH.,#297195); +#297195 = SURFACE_SIDE_STYLE('',(#297196)); +#297196 = SURFACE_STYLE_FILL_AREA(#297197); +#297197 = FILL_AREA_STYLE('',(#297198)); +#297198 = FILL_AREA_STYLE_COLOUR('',#282540); +#297199 = CURVE_STYLE('',#297200,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297201 = STYLED_ITEM('color',(#297202),#86451); +#297202 = PRESENTATION_STYLE_ASSIGNMENT((#297203,#297208)); +#297203 = SURFACE_STYLE_USAGE(.BOTH.,#297204); +#297204 = SURFACE_SIDE_STYLE('',(#297205)); +#297205 = SURFACE_STYLE_FILL_AREA(#297206); +#297206 = FILL_AREA_STYLE('',(#297207)); +#297207 = FILL_AREA_STYLE_COLOUR('',#282540); +#297208 = CURVE_STYLE('',#297209,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297210 = STYLED_ITEM('color',(#297211),#86482); +#297211 = PRESENTATION_STYLE_ASSIGNMENT((#297212,#297217)); +#297212 = SURFACE_STYLE_USAGE(.BOTH.,#297213); +#297213 = SURFACE_SIDE_STYLE('',(#297214)); +#297214 = SURFACE_STYLE_FILL_AREA(#297215); +#297215 = FILL_AREA_STYLE('',(#297216)); +#297216 = FILL_AREA_STYLE_COLOUR('',#282540); +#297217 = CURVE_STYLE('',#297218,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297219 = STYLED_ITEM('color',(#297220),#86506); +#297220 = PRESENTATION_STYLE_ASSIGNMENT((#297221,#297226)); +#297221 = SURFACE_STYLE_USAGE(.BOTH.,#297222); +#297222 = SURFACE_SIDE_STYLE('',(#297223)); +#297223 = SURFACE_STYLE_FILL_AREA(#297224); +#297224 = FILL_AREA_STYLE('',(#297225)); +#297225 = FILL_AREA_STYLE_COLOUR('',#282540); +#297226 = CURVE_STYLE('',#297227,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297228 = STYLED_ITEM('color',(#297229),#86530); +#297229 = PRESENTATION_STYLE_ASSIGNMENT((#297230,#297235)); +#297230 = SURFACE_STYLE_USAGE(.BOTH.,#297231); +#297231 = SURFACE_SIDE_STYLE('',(#297232)); +#297232 = SURFACE_STYLE_FILL_AREA(#297233); +#297233 = FILL_AREA_STYLE('',(#297234)); +#297234 = FILL_AREA_STYLE_COLOUR('',#282540); +#297235 = CURVE_STYLE('',#297236,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297237 = STYLED_ITEM('color',(#297238),#86547); +#297238 = PRESENTATION_STYLE_ASSIGNMENT((#297239,#297244)); +#297239 = SURFACE_STYLE_USAGE(.BOTH.,#297240); +#297240 = SURFACE_SIDE_STYLE('',(#297241)); +#297241 = SURFACE_STYLE_FILL_AREA(#297242); +#297242 = FILL_AREA_STYLE('',(#297243)); +#297243 = FILL_AREA_STYLE_COLOUR('',#282540); +#297244 = CURVE_STYLE('',#297245,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297246 = STYLED_ITEM('color',(#297247),#86557); +#297247 = PRESENTATION_STYLE_ASSIGNMENT((#297248,#297253)); +#297248 = SURFACE_STYLE_USAGE(.BOTH.,#297249); +#297249 = SURFACE_SIDE_STYLE('',(#297250)); +#297250 = SURFACE_STYLE_FILL_AREA(#297251); +#297251 = FILL_AREA_STYLE('',(#297252)); +#297252 = FILL_AREA_STYLE_COLOUR('',#282540); +#297253 = CURVE_STYLE('',#297254,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297255 = STYLED_ITEM('color',(#297256),#86588); +#297256 = PRESENTATION_STYLE_ASSIGNMENT((#297257,#297262)); +#297257 = SURFACE_STYLE_USAGE(.BOTH.,#297258); +#297258 = SURFACE_SIDE_STYLE('',(#297259)); +#297259 = SURFACE_STYLE_FILL_AREA(#297260); +#297260 = FILL_AREA_STYLE('',(#297261)); +#297261 = FILL_AREA_STYLE_COLOUR('',#282540); +#297262 = CURVE_STYLE('',#297263,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297264 = STYLED_ITEM('color',(#297265),#86612); +#297265 = PRESENTATION_STYLE_ASSIGNMENT((#297266,#297271)); +#297266 = SURFACE_STYLE_USAGE(.BOTH.,#297267); +#297267 = SURFACE_SIDE_STYLE('',(#297268)); +#297268 = SURFACE_STYLE_FILL_AREA(#297269); +#297269 = FILL_AREA_STYLE('',(#297270)); +#297270 = FILL_AREA_STYLE_COLOUR('',#282540); +#297271 = CURVE_STYLE('',#297272,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297273 = STYLED_ITEM('color',(#297274),#86636); +#297274 = PRESENTATION_STYLE_ASSIGNMENT((#297275,#297280)); +#297275 = SURFACE_STYLE_USAGE(.BOTH.,#297276); +#297276 = SURFACE_SIDE_STYLE('',(#297277)); +#297277 = SURFACE_STYLE_FILL_AREA(#297278); +#297278 = FILL_AREA_STYLE('',(#297279)); +#297279 = FILL_AREA_STYLE_COLOUR('',#282540); +#297280 = CURVE_STYLE('',#297281,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297282 = STYLED_ITEM('color',(#297283),#86653); +#297283 = PRESENTATION_STYLE_ASSIGNMENT((#297284,#297289)); +#297284 = SURFACE_STYLE_USAGE(.BOTH.,#297285); +#297285 = SURFACE_SIDE_STYLE('',(#297286)); +#297286 = SURFACE_STYLE_FILL_AREA(#297287); +#297287 = FILL_AREA_STYLE('',(#297288)); +#297288 = FILL_AREA_STYLE_COLOUR('',#282540); +#297289 = CURVE_STYLE('',#297290,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297291 = STYLED_ITEM('color',(#297292),#86669); +#297292 = PRESENTATION_STYLE_ASSIGNMENT((#297293,#297298)); +#297293 = SURFACE_STYLE_USAGE(.BOTH.,#297294); +#297294 = SURFACE_SIDE_STYLE('',(#297295)); +#297295 = SURFACE_STYLE_FILL_AREA(#297296); +#297296 = FILL_AREA_STYLE('',(#297297)); +#297297 = FILL_AREA_STYLE_COLOUR('',#282540); +#297298 = CURVE_STYLE('',#297299,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297300 = STYLED_ITEM('color',(#297301),#86686); +#297301 = PRESENTATION_STYLE_ASSIGNMENT((#297302,#297307)); +#297302 = SURFACE_STYLE_USAGE(.BOTH.,#297303); +#297303 = SURFACE_SIDE_STYLE('',(#297304)); +#297304 = SURFACE_STYLE_FILL_AREA(#297305); +#297305 = FILL_AREA_STYLE('',(#297306)); +#297306 = FILL_AREA_STYLE_COLOUR('',#282540); +#297307 = CURVE_STYLE('',#297308,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297309 = STYLED_ITEM('color',(#297310),#86703); +#297310 = PRESENTATION_STYLE_ASSIGNMENT((#297311,#297316)); +#297311 = SURFACE_STYLE_USAGE(.BOTH.,#297312); +#297312 = SURFACE_SIDE_STYLE('',(#297313)); +#297313 = SURFACE_STYLE_FILL_AREA(#297314); +#297314 = FILL_AREA_STYLE('',(#297315)); +#297315 = FILL_AREA_STYLE_COLOUR('',#282540); +#297316 = CURVE_STYLE('',#297317,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297318 = STYLED_ITEM('color',(#297319),#86720); +#297319 = PRESENTATION_STYLE_ASSIGNMENT((#297320,#297325)); +#297320 = SURFACE_STYLE_USAGE(.BOTH.,#297321); +#297321 = SURFACE_SIDE_STYLE('',(#297322)); +#297322 = SURFACE_STYLE_FILL_AREA(#297323); +#297323 = FILL_AREA_STYLE('',(#297324)); +#297324 = FILL_AREA_STYLE_COLOUR('',#282540); +#297325 = CURVE_STYLE('',#297326,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297327 = STYLED_ITEM('color',(#297328),#86730); +#297328 = PRESENTATION_STYLE_ASSIGNMENT((#297329,#297334)); +#297329 = SURFACE_STYLE_USAGE(.BOTH.,#297330); +#297330 = SURFACE_SIDE_STYLE('',(#297331)); +#297331 = SURFACE_STYLE_FILL_AREA(#297332); +#297332 = FILL_AREA_STYLE('',(#297333)); +#297333 = FILL_AREA_STYLE_COLOUR('',#282540); +#297334 = CURVE_STYLE('',#297335,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297336 = STYLED_ITEM('color',(#297337),#86746); +#297337 = PRESENTATION_STYLE_ASSIGNMENT((#297338,#297343)); +#297338 = SURFACE_STYLE_USAGE(.BOTH.,#297339); +#297339 = SURFACE_SIDE_STYLE('',(#297340)); +#297340 = SURFACE_STYLE_FILL_AREA(#297341); +#297341 = FILL_AREA_STYLE('',(#297342)); +#297342 = FILL_AREA_STYLE_COLOUR('',#282540); +#297343 = CURVE_STYLE('',#297344,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297345 = STYLED_ITEM('color',(#297346),#86763); +#297346 = PRESENTATION_STYLE_ASSIGNMENT((#297347,#297352)); +#297347 = SURFACE_STYLE_USAGE(.BOTH.,#297348); +#297348 = SURFACE_SIDE_STYLE('',(#297349)); +#297349 = SURFACE_STYLE_FILL_AREA(#297350); +#297350 = FILL_AREA_STYLE('',(#297351)); +#297351 = FILL_AREA_STYLE_COLOUR('',#282540); +#297352 = CURVE_STYLE('',#297353,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297354 = STYLED_ITEM('color',(#297355),#86780); +#297355 = PRESENTATION_STYLE_ASSIGNMENT((#297356,#297361)); +#297356 = SURFACE_STYLE_USAGE(.BOTH.,#297357); +#297357 = SURFACE_SIDE_STYLE('',(#297358)); +#297358 = SURFACE_STYLE_FILL_AREA(#297359); +#297359 = FILL_AREA_STYLE('',(#297360)); +#297360 = FILL_AREA_STYLE_COLOUR('',#282540); +#297361 = CURVE_STYLE('',#297362,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297363 = STYLED_ITEM('color',(#297364),#86797); +#297364 = PRESENTATION_STYLE_ASSIGNMENT((#297365,#297370)); +#297365 = SURFACE_STYLE_USAGE(.BOTH.,#297366); +#297366 = SURFACE_SIDE_STYLE('',(#297367)); +#297367 = SURFACE_STYLE_FILL_AREA(#297368); +#297368 = FILL_AREA_STYLE('',(#297369)); +#297369 = FILL_AREA_STYLE_COLOUR('',#282540); +#297370 = CURVE_STYLE('',#297371,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297372 = STYLED_ITEM('color',(#297373),#86807); +#297373 = PRESENTATION_STYLE_ASSIGNMENT((#297374,#297379)); +#297374 = SURFACE_STYLE_USAGE(.BOTH.,#297375); +#297375 = SURFACE_SIDE_STYLE('',(#297376)); +#297376 = SURFACE_STYLE_FILL_AREA(#297377); +#297377 = FILL_AREA_STYLE('',(#297378)); +#297378 = FILL_AREA_STYLE_COLOUR('',#282540); +#297379 = CURVE_STYLE('',#297380,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297381 = STYLED_ITEM('color',(#297382),#86823); +#297382 = PRESENTATION_STYLE_ASSIGNMENT((#297383,#297388)); +#297383 = SURFACE_STYLE_USAGE(.BOTH.,#297384); +#297384 = SURFACE_SIDE_STYLE('',(#297385)); +#297385 = SURFACE_STYLE_FILL_AREA(#297386); +#297386 = FILL_AREA_STYLE('',(#297387)); +#297387 = FILL_AREA_STYLE_COLOUR('',#282540); +#297388 = CURVE_STYLE('',#297389,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297390 = STYLED_ITEM('color',(#297391),#86840); +#297391 = PRESENTATION_STYLE_ASSIGNMENT((#297392,#297397)); +#297392 = SURFACE_STYLE_USAGE(.BOTH.,#297393); +#297393 = SURFACE_SIDE_STYLE('',(#297394)); +#297394 = SURFACE_STYLE_FILL_AREA(#297395); +#297395 = FILL_AREA_STYLE('',(#297396)); +#297396 = FILL_AREA_STYLE_COLOUR('',#282540); +#297397 = CURVE_STYLE('',#297398,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297399 = STYLED_ITEM('color',(#297400),#86857); +#297400 = PRESENTATION_STYLE_ASSIGNMENT((#297401,#297406)); +#297401 = SURFACE_STYLE_USAGE(.BOTH.,#297402); +#297402 = SURFACE_SIDE_STYLE('',(#297403)); +#297403 = SURFACE_STYLE_FILL_AREA(#297404); +#297404 = FILL_AREA_STYLE('',(#297405)); +#297405 = FILL_AREA_STYLE_COLOUR('',#282540); +#297406 = CURVE_STYLE('',#297407,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297408 = STYLED_ITEM('color',(#297409),#86874); +#297409 = PRESENTATION_STYLE_ASSIGNMENT((#297410,#297415)); +#297410 = SURFACE_STYLE_USAGE(.BOTH.,#297411); +#297411 = SURFACE_SIDE_STYLE('',(#297412)); +#297412 = SURFACE_STYLE_FILL_AREA(#297413); +#297413 = FILL_AREA_STYLE('',(#297414)); +#297414 = FILL_AREA_STYLE_COLOUR('',#282540); +#297415 = CURVE_STYLE('',#297416,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297417 = STYLED_ITEM('color',(#297418),#86884); +#297418 = PRESENTATION_STYLE_ASSIGNMENT((#297419,#297424)); +#297419 = SURFACE_STYLE_USAGE(.BOTH.,#297420); +#297420 = SURFACE_SIDE_STYLE('',(#297421)); +#297421 = SURFACE_STYLE_FILL_AREA(#297422); +#297422 = FILL_AREA_STYLE('',(#297423)); +#297423 = FILL_AREA_STYLE_COLOUR('',#282540); +#297424 = CURVE_STYLE('',#297425,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297426 = STYLED_ITEM('color',(#297427),#86900); +#297427 = PRESENTATION_STYLE_ASSIGNMENT((#297428,#297433)); +#297428 = SURFACE_STYLE_USAGE(.BOTH.,#297429); +#297429 = SURFACE_SIDE_STYLE('',(#297430)); +#297430 = SURFACE_STYLE_FILL_AREA(#297431); +#297431 = FILL_AREA_STYLE('',(#297432)); +#297432 = FILL_AREA_STYLE_COLOUR('',#282540); +#297433 = CURVE_STYLE('',#297434,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297435 = STYLED_ITEM('color',(#297436),#86917); +#297436 = PRESENTATION_STYLE_ASSIGNMENT((#297437,#297442)); +#297437 = SURFACE_STYLE_USAGE(.BOTH.,#297438); +#297438 = SURFACE_SIDE_STYLE('',(#297439)); +#297439 = SURFACE_STYLE_FILL_AREA(#297440); +#297440 = FILL_AREA_STYLE('',(#297441)); +#297441 = FILL_AREA_STYLE_COLOUR('',#282540); +#297442 = CURVE_STYLE('',#297443,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297444 = STYLED_ITEM('color',(#297445),#86934); +#297445 = PRESENTATION_STYLE_ASSIGNMENT((#297446,#297451)); +#297446 = SURFACE_STYLE_USAGE(.BOTH.,#297447); +#297447 = SURFACE_SIDE_STYLE('',(#297448)); +#297448 = SURFACE_STYLE_FILL_AREA(#297449); +#297449 = FILL_AREA_STYLE('',(#297450)); +#297450 = FILL_AREA_STYLE_COLOUR('',#282540); +#297451 = CURVE_STYLE('',#297452,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297453 = STYLED_ITEM('color',(#297454),#86951); +#297454 = PRESENTATION_STYLE_ASSIGNMENT((#297455,#297460)); +#297455 = SURFACE_STYLE_USAGE(.BOTH.,#297456); +#297456 = SURFACE_SIDE_STYLE('',(#297457)); +#297457 = SURFACE_STYLE_FILL_AREA(#297458); +#297458 = FILL_AREA_STYLE('',(#297459)); +#297459 = FILL_AREA_STYLE_COLOUR('',#282540); +#297460 = CURVE_STYLE('',#297461,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297462 = STYLED_ITEM('color',(#297463),#86961); +#297463 = PRESENTATION_STYLE_ASSIGNMENT((#297464,#297469)); +#297464 = SURFACE_STYLE_USAGE(.BOTH.,#297465); +#297465 = SURFACE_SIDE_STYLE('',(#297466)); +#297466 = SURFACE_STYLE_FILL_AREA(#297467); +#297467 = FILL_AREA_STYLE('',(#297468)); +#297468 = FILL_AREA_STYLE_COLOUR('',#282540); +#297469 = CURVE_STYLE('',#297470,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297471 = STYLED_ITEM('color',(#297472),#86977); +#297472 = PRESENTATION_STYLE_ASSIGNMENT((#297473,#297478)); +#297473 = SURFACE_STYLE_USAGE(.BOTH.,#297474); +#297474 = SURFACE_SIDE_STYLE('',(#297475)); +#297475 = SURFACE_STYLE_FILL_AREA(#297476); +#297476 = FILL_AREA_STYLE('',(#297477)); +#297477 = FILL_AREA_STYLE_COLOUR('',#282540); +#297478 = CURVE_STYLE('',#297479,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297480 = STYLED_ITEM('color',(#297481),#86994); +#297481 = PRESENTATION_STYLE_ASSIGNMENT((#297482,#297487)); +#297482 = SURFACE_STYLE_USAGE(.BOTH.,#297483); +#297483 = SURFACE_SIDE_STYLE('',(#297484)); +#297484 = SURFACE_STYLE_FILL_AREA(#297485); +#297485 = FILL_AREA_STYLE('',(#297486)); +#297486 = FILL_AREA_STYLE_COLOUR('',#282540); +#297487 = CURVE_STYLE('',#297488,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297489 = STYLED_ITEM('color',(#297490),#87011); +#297490 = PRESENTATION_STYLE_ASSIGNMENT((#297491,#297496)); +#297491 = SURFACE_STYLE_USAGE(.BOTH.,#297492); +#297492 = SURFACE_SIDE_STYLE('',(#297493)); +#297493 = SURFACE_STYLE_FILL_AREA(#297494); +#297494 = FILL_AREA_STYLE('',(#297495)); +#297495 = FILL_AREA_STYLE_COLOUR('',#282540); +#297496 = CURVE_STYLE('',#297497,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297498 = STYLED_ITEM('color',(#297499),#87028); +#297499 = PRESENTATION_STYLE_ASSIGNMENT((#297500,#297505)); +#297500 = SURFACE_STYLE_USAGE(.BOTH.,#297501); +#297501 = SURFACE_SIDE_STYLE('',(#297502)); +#297502 = SURFACE_STYLE_FILL_AREA(#297503); +#297503 = FILL_AREA_STYLE('',(#297504)); +#297504 = FILL_AREA_STYLE_COLOUR('',#282540); +#297505 = CURVE_STYLE('',#297506,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#297506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297507 = STYLED_ITEM('color',(#297508),#87038); +#297508 = PRESENTATION_STYLE_ASSIGNMENT((#297509,#297514)); +#297509 = SURFACE_STYLE_USAGE(.BOTH.,#297510); +#297510 = SURFACE_SIDE_STYLE('',(#297511)); +#297511 = SURFACE_STYLE_FILL_AREA(#297512); +#297512 = FILL_AREA_STYLE('',(#297513)); +#297513 = FILL_AREA_STYLE_COLOUR('',#293072); +#297514 = CURVE_STYLE('',#297515,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#297515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297516 = STYLED_ITEM('color',(#297517),#87050); +#297517 = PRESENTATION_STYLE_ASSIGNMENT((#297518,#297523)); +#297518 = SURFACE_STYLE_USAGE(.BOTH.,#297519); +#297519 = SURFACE_SIDE_STYLE('',(#297520)); +#297520 = SURFACE_STYLE_FILL_AREA(#297521); +#297521 = FILL_AREA_STYLE('',(#297522)); +#297522 = FILL_AREA_STYLE_COLOUR('',#293072); +#297523 = CURVE_STYLE('',#297524,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#297524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297525 = STYLED_ITEM('color',(#297526),#87062); +#297526 = PRESENTATION_STYLE_ASSIGNMENT((#297527,#297532)); +#297527 = SURFACE_STYLE_USAGE(.BOTH.,#297528); +#297528 = SURFACE_SIDE_STYLE('',(#297529)); +#297529 = SURFACE_STYLE_FILL_AREA(#297530); +#297530 = FILL_AREA_STYLE('',(#297531)); +#297531 = FILL_AREA_STYLE_COLOUR('',#293072); +#297532 = CURVE_STYLE('',#297533,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#297533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297534 = STYLED_ITEM('color',(#297535),#87074); +#297535 = PRESENTATION_STYLE_ASSIGNMENT((#297536,#297541)); +#297536 = SURFACE_STYLE_USAGE(.BOTH.,#297537); +#297537 = SURFACE_SIDE_STYLE('',(#297538)); +#297538 = SURFACE_STYLE_FILL_AREA(#297539); +#297539 = FILL_AREA_STYLE('',(#297540)); +#297540 = FILL_AREA_STYLE_COLOUR('',#293072); +#297541 = CURVE_STYLE('',#297542,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#297542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297543 = STYLED_ITEM('color',(#297544),#87086); +#297544 = PRESENTATION_STYLE_ASSIGNMENT((#297545,#297550)); +#297545 = SURFACE_STYLE_USAGE(.BOTH.,#297546); +#297546 = SURFACE_SIDE_STYLE('',(#297547)); +#297547 = SURFACE_STYLE_FILL_AREA(#297548); +#297548 = FILL_AREA_STYLE('',(#297549)); +#297549 = FILL_AREA_STYLE_COLOUR('',#293072); +#297550 = CURVE_STYLE('',#297551,POSITIVE_LENGTH_MEASURE(0.1),#293072); +#297551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297552 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #297553,#297562,#297571,#297580,#297589,#297598,#297607,#297616, + #297625,#297634,#297643,#297652,#297661,#297670,#297679,#297688, + #297697,#297706,#297715,#297724,#297733,#297742,#297751,#297760, + #297769,#297778,#297787,#297796,#297805,#297814,#297823,#297832, + #297841,#297850,#297859,#297868,#297877,#297886,#297895,#297904, + #297913,#297922,#297931,#297940,#297949,#297958,#297967,#297976, + #297985,#297994,#298003,#298012,#298021,#298030,#298039,#298048, + #298057,#298066,#298075,#298084,#298093,#298102,#298111,#298120, + #298129,#298138,#298147,#298156,#298165,#298174,#298183,#298192, + #298201,#298210,#298219,#298228,#298237,#298246,#298255,#298264, + #298273,#298282,#298291,#298300,#298309,#298318,#298327,#298336, + #298345,#298354,#298363,#298372,#298381,#298390,#298399,#298408, + #298417,#298426,#298435,#298444,#298453,#298462,#298471,#298480, + #298489,#298498,#298507,#298516,#298525,#298534,#298543,#298552, + #298561,#298570,#298579,#298588,#298597,#298606,#298615,#298624, + #298633,#298642,#298651,#298660,#298669,#298678,#298687,#298696, + #298705,#298714,#298723,#298732,#298741,#298750,#298759,#298768, + #298777,#298786,#298795,#298804,#298813,#298822,#298831,#298840, + #298849,#298858,#298867,#298876,#298885,#298894,#298903,#298912, + #298921,#298930,#298939,#298948,#298957,#298966,#298975,#298984, + #298993,#299002,#299011,#299020,#299029,#299038,#299047,#299056, + #299065,#299074,#299083,#299092,#299101,#299110,#299119,#299128, + #299137,#299146,#299155,#299164,#299173,#299182,#299191,#299200, + #299209,#299218,#299227,#299236,#299245,#299254,#299263,#299272, + #299281,#299290,#299299,#299308,#299317,#299326,#299335,#299344, + #299353,#299362,#299371,#299380,#299389,#299398,#299407,#299416, + #299425,#299434,#299443,#299452,#299461,#299470,#299479,#299488, + #299497,#299506,#299515,#299524,#299533,#299542,#299551,#299560, + #299569,#299578,#299587,#299596,#299605,#299614,#299623,#299632, + #299641,#299650,#299659,#299668,#299677,#299686,#299695,#299704, + #299713,#299722,#299731,#299740,#299749,#299758,#299767,#299776, + #299785,#299794,#299803,#299812,#299821,#299830,#299839,#299848, + #299857,#299866,#299875,#299884,#299893,#299902,#299911,#299920, + #299929,#299938,#299947,#299956,#299965,#299974,#299983,#299992, + #300001,#300010,#300019,#300028,#300037,#300046,#300055,#300064, + #300073,#300082,#300091,#300100,#300109,#300118,#300127,#300136, + #300145,#300154,#300163,#300172,#300181,#300190,#300199,#300208, + #300217,#300226,#300235,#300244,#300253,#300262,#300271,#300280, + #300289,#300298,#300307,#300316,#300325,#300334,#300343,#300352, + #300361,#300370,#300379,#300388,#300397,#300406,#300415,#300424, + #300433,#300442,#300451,#300460,#300469,#300478,#300487,#300496, + #300505,#300514,#300523,#300532,#300541,#300550,#300559,#300568, + #300577,#300586,#300595,#300604,#300613,#300622,#300631,#300640, + #300649,#300658,#300667,#300676,#300685,#300694,#300703,#300712, + #300721,#300730,#300739,#300748,#300757,#300766,#300775,#300784, + #300793,#300802,#300811,#300820,#300829,#300838,#300847,#300856, + #300865,#300874,#300883,#300892,#300901,#300910,#300919,#300928, + #300937,#300946,#300955,#300964,#300973,#300982,#300991,#301000, + #301009,#301018,#301027,#301036,#301045,#301054,#301063,#301072, + #301081,#301090,#301099,#301108,#301117,#301126,#301135,#301144, + #301153,#301162,#301171,#301180,#301189,#301198,#301207,#301216, + #301225,#301234,#301243,#301252,#301261,#301270,#301279,#301288, + #301297,#301306,#301315,#301324,#301333,#301342,#301351,#301360, + #301369,#301378,#301387,#301396,#301405,#301414,#301423,#301432, + #301441,#301450,#301459,#301468,#301477,#301486,#301495,#301504, + #301513,#301522,#301531,#301540,#301549,#301558,#301567,#301576, + #301585,#301594,#301603,#301612,#301621,#301630,#301639,#301648, + #301657,#301666,#301675,#301684,#301693,#301702,#301711,#301720, + #301729,#301738,#301747,#301756,#301765,#301774,#301783,#301792, + #301801,#301810,#301819,#301828,#301837,#301846,#301855,#301864, + #301873,#301882,#301891,#301900,#301909,#301918,#301927,#301936, + #301945,#301954,#301963,#301972,#301981,#301990,#301999,#302008, + #302017,#302026,#302035,#302044,#302053,#302062,#302071,#302080, + #302089,#302098,#302107,#302116,#302125,#302134,#302143,#302152, + #302161,#302170,#302179,#302188,#302197,#302206,#302215,#302224, + #302233,#302242,#302251,#302260,#302269,#302278,#302287,#302296, + #302305,#302314,#302323,#302332,#302341,#302350,#302359,#302368, + #302377,#302386,#302395,#302404,#302413,#302422,#302431,#302440, + #302449,#302458,#302467,#302476,#302485,#302494,#302503,#302512, + #302521,#302530,#302539,#302548,#302557,#302566,#302575,#302584, + #302593,#302602,#302611,#302620,#302629,#302638,#302647,#302656, + #302665,#302674,#302683,#302692,#302701,#302710,#302719,#302728, + #302737,#302746,#302755,#302764,#302773,#302782,#302791,#302800, + #302809,#302818,#302827,#302836,#302845,#302854,#302863,#302872, + #302881,#302890,#302899,#302908,#302917,#302926,#302935,#302944, + #302953,#302962,#302971,#302980,#302989,#302998,#303007,#303016, + #303025,#303034,#303043,#303052,#303061,#303070,#303079,#303088, + #303097,#303106,#303115,#303124,#303133,#303142,#303151,#303160, + #303169,#303178,#303187,#303196,#303205,#303214,#303223,#303232, + #303241,#303250,#303259,#303268,#303277,#303286,#303295,#303304, + #303313,#303322,#303331,#303340,#303349,#303358,#303367,#303376, + #303385,#303394,#303403,#303412,#303421,#303430,#303439,#303448, + #303457,#303466,#303475,#303484,#303493,#303502,#303511,#303520, + #303529,#303538,#303547,#303556,#303565,#303574,#303583,#303592, + #303601,#303610,#303619,#303628,#303637,#303646,#303655,#303664, + #303673,#303682,#303691,#303700,#303709,#303718,#303727,#303736, + #303745,#303754),#36128); +#297553 = STYLED_ITEM('color',(#297554),#20328); +#297554 = PRESENTATION_STYLE_ASSIGNMENT((#297555,#297560)); +#297555 = SURFACE_STYLE_USAGE(.BOTH.,#297556); +#297556 = SURFACE_SIDE_STYLE('',(#297557)); +#297557 = SURFACE_STYLE_FILL_AREA(#297558); +#297558 = FILL_AREA_STYLE('',(#297559)); +#297559 = FILL_AREA_STYLE_COLOUR('',#279624); +#297560 = CURVE_STYLE('',#297561,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297562 = STYLED_ITEM('color',(#297563),#20368); +#297563 = PRESENTATION_STYLE_ASSIGNMENT((#297564,#297569)); +#297564 = SURFACE_STYLE_USAGE(.BOTH.,#297565); +#297565 = SURFACE_SIDE_STYLE('',(#297566)); +#297566 = SURFACE_STYLE_FILL_AREA(#297567); +#297567 = FILL_AREA_STYLE('',(#297568)); +#297568 = FILL_AREA_STYLE_COLOUR('',#279624); +#297569 = CURVE_STYLE('',#297570,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297571 = STYLED_ITEM('color',(#297572),#20431); +#297572 = PRESENTATION_STYLE_ASSIGNMENT((#297573,#297578)); +#297573 = SURFACE_STYLE_USAGE(.BOTH.,#297574); +#297574 = SURFACE_SIDE_STYLE('',(#297575)); +#297575 = SURFACE_STYLE_FILL_AREA(#297576); +#297576 = FILL_AREA_STYLE('',(#297577)); +#297577 = FILL_AREA_STYLE_COLOUR('',#279624); +#297578 = CURVE_STYLE('',#297579,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297580 = STYLED_ITEM('color',(#297581),#20494); +#297581 = PRESENTATION_STYLE_ASSIGNMENT((#297582,#297587)); +#297582 = SURFACE_STYLE_USAGE(.BOTH.,#297583); +#297583 = SURFACE_SIDE_STYLE('',(#297584)); +#297584 = SURFACE_STYLE_FILL_AREA(#297585); +#297585 = FILL_AREA_STYLE('',(#297586)); +#297586 = FILL_AREA_STYLE_COLOUR('',#279624); +#297587 = CURVE_STYLE('',#297588,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297589 = STYLED_ITEM('color',(#297590),#20511); +#297590 = PRESENTATION_STYLE_ASSIGNMENT((#297591,#297596)); +#297591 = SURFACE_STYLE_USAGE(.BOTH.,#297592); +#297592 = SURFACE_SIDE_STYLE('',(#297593)); +#297593 = SURFACE_STYLE_FILL_AREA(#297594); +#297594 = FILL_AREA_STYLE('',(#297595)); +#297595 = FILL_AREA_STYLE_COLOUR('',#279624); +#297596 = CURVE_STYLE('',#297597,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297598 = STYLED_ITEM('color',(#297599),#21208); +#297599 = PRESENTATION_STYLE_ASSIGNMENT((#297600,#297605)); +#297600 = SURFACE_STYLE_USAGE(.BOTH.,#297601); +#297601 = SURFACE_SIDE_STYLE('',(#297602)); +#297602 = SURFACE_STYLE_FILL_AREA(#297603); +#297603 = FILL_AREA_STYLE('',(#297604)); +#297604 = FILL_AREA_STYLE_COLOUR('',#279624); +#297605 = CURVE_STYLE('',#297606,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297607 = STYLED_ITEM('color',(#297608),#21230); +#297608 = PRESENTATION_STYLE_ASSIGNMENT((#297609,#297614)); +#297609 = SURFACE_STYLE_USAGE(.BOTH.,#297610); +#297610 = SURFACE_SIDE_STYLE('',(#297611)); +#297611 = SURFACE_STYLE_FILL_AREA(#297612); +#297612 = FILL_AREA_STYLE('',(#297613)); +#297613 = FILL_AREA_STYLE_COLOUR('',#279624); +#297614 = CURVE_STYLE('',#297615,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297616 = STYLED_ITEM('color',(#297617),#21247); +#297617 = PRESENTATION_STYLE_ASSIGNMENT((#297618,#297623)); +#297618 = SURFACE_STYLE_USAGE(.BOTH.,#297619); +#297619 = SURFACE_SIDE_STYLE('',(#297620)); +#297620 = SURFACE_STYLE_FILL_AREA(#297621); +#297621 = FILL_AREA_STYLE('',(#297622)); +#297622 = FILL_AREA_STYLE_COLOUR('',#279624); +#297623 = CURVE_STYLE('',#297624,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297625 = OVER_RIDING_STYLED_ITEM('overriding color',(#297626),#21280, + #297616); +#297626 = PRESENTATION_STYLE_ASSIGNMENT((#297627,#297632)); +#297627 = SURFACE_STYLE_USAGE(.BOTH.,#297628); +#297628 = SURFACE_SIDE_STYLE('',(#297629)); +#297629 = SURFACE_STYLE_FILL_AREA(#297630); +#297630 = FILL_AREA_STYLE('',(#297631)); +#297631 = FILL_AREA_STYLE_COLOUR('',#280691); +#297632 = CURVE_STYLE('',#297633,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297634 = OVER_RIDING_STYLED_ITEM('overriding color',(#297635),#21312, + #297616); +#297635 = PRESENTATION_STYLE_ASSIGNMENT((#297636,#297641)); +#297636 = SURFACE_STYLE_USAGE(.BOTH.,#297637); +#297637 = SURFACE_SIDE_STYLE('',(#297638)); +#297638 = SURFACE_STYLE_FILL_AREA(#297639); +#297639 = FILL_AREA_STYLE('',(#297640)); +#297640 = FILL_AREA_STYLE_COLOUR('',#280691); +#297641 = CURVE_STYLE('',#297642,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297643 = OVER_RIDING_STYLED_ITEM('overriding color',(#297644),#21346, + #297616); +#297644 = PRESENTATION_STYLE_ASSIGNMENT((#297645,#297650)); +#297645 = SURFACE_STYLE_USAGE(.BOTH.,#297646); +#297646 = SURFACE_SIDE_STYLE('',(#297647)); +#297647 = SURFACE_STYLE_FILL_AREA(#297648); +#297648 = FILL_AREA_STYLE('',(#297649)); +#297649 = FILL_AREA_STYLE_COLOUR('',#280691); +#297650 = CURVE_STYLE('',#297651,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297652 = OVER_RIDING_STYLED_ITEM('overriding color',(#297653),#21378, + #297616); +#297653 = PRESENTATION_STYLE_ASSIGNMENT((#297654,#297659)); +#297654 = SURFACE_STYLE_USAGE(.BOTH.,#297655); +#297655 = SURFACE_SIDE_STYLE('',(#297656)); +#297656 = SURFACE_STYLE_FILL_AREA(#297657); +#297657 = FILL_AREA_STYLE('',(#297658)); +#297658 = FILL_AREA_STYLE_COLOUR('',#280691); +#297659 = CURVE_STYLE('',#297660,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297661 = OVER_RIDING_STYLED_ITEM('overriding color',(#297662),#21412, + #297616); +#297662 = PRESENTATION_STYLE_ASSIGNMENT((#297663,#297668)); +#297663 = SURFACE_STYLE_USAGE(.BOTH.,#297664); +#297664 = SURFACE_SIDE_STYLE('',(#297665)); +#297665 = SURFACE_STYLE_FILL_AREA(#297666); +#297666 = FILL_AREA_STYLE('',(#297667)); +#297667 = FILL_AREA_STYLE_COLOUR('',#280691); +#297668 = CURVE_STYLE('',#297669,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297670 = OVER_RIDING_STYLED_ITEM('overriding color',(#297671),#21444, + #297616); +#297671 = PRESENTATION_STYLE_ASSIGNMENT((#297672,#297677)); +#297672 = SURFACE_STYLE_USAGE(.BOTH.,#297673); +#297673 = SURFACE_SIDE_STYLE('',(#297674)); +#297674 = SURFACE_STYLE_FILL_AREA(#297675); +#297675 = FILL_AREA_STYLE('',(#297676)); +#297676 = FILL_AREA_STYLE_COLOUR('',#280691); +#297677 = CURVE_STYLE('',#297678,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297679 = OVER_RIDING_STYLED_ITEM('overriding color',(#297680),#21478, + #297616); +#297680 = PRESENTATION_STYLE_ASSIGNMENT((#297681,#297686)); +#297681 = SURFACE_STYLE_USAGE(.BOTH.,#297682); +#297682 = SURFACE_SIDE_STYLE('',(#297683)); +#297683 = SURFACE_STYLE_FILL_AREA(#297684); +#297684 = FILL_AREA_STYLE('',(#297685)); +#297685 = FILL_AREA_STYLE_COLOUR('',#280691); +#297686 = CURVE_STYLE('',#297687,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297688 = OVER_RIDING_STYLED_ITEM('overriding color',(#297689),#21510, + #297616); +#297689 = PRESENTATION_STYLE_ASSIGNMENT((#297690,#297695)); +#297690 = SURFACE_STYLE_USAGE(.BOTH.,#297691); +#297691 = SURFACE_SIDE_STYLE('',(#297692)); +#297692 = SURFACE_STYLE_FILL_AREA(#297693); +#297693 = FILL_AREA_STYLE('',(#297694)); +#297694 = FILL_AREA_STYLE_COLOUR('',#280691); +#297695 = CURVE_STYLE('',#297696,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297697 = OVER_RIDING_STYLED_ITEM('overriding color',(#297698),#21544, + #297616); +#297698 = PRESENTATION_STYLE_ASSIGNMENT((#297699,#297704)); +#297699 = SURFACE_STYLE_USAGE(.BOTH.,#297700); +#297700 = SURFACE_SIDE_STYLE('',(#297701)); +#297701 = SURFACE_STYLE_FILL_AREA(#297702); +#297702 = FILL_AREA_STYLE('',(#297703)); +#297703 = FILL_AREA_STYLE_COLOUR('',#280691); +#297704 = CURVE_STYLE('',#297705,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297706 = OVER_RIDING_STYLED_ITEM('overriding color',(#297707),#21576, + #297616); +#297707 = PRESENTATION_STYLE_ASSIGNMENT((#297708,#297713)); +#297708 = SURFACE_STYLE_USAGE(.BOTH.,#297709); +#297709 = SURFACE_SIDE_STYLE('',(#297710)); +#297710 = SURFACE_STYLE_FILL_AREA(#297711); +#297711 = FILL_AREA_STYLE('',(#297712)); +#297712 = FILL_AREA_STYLE_COLOUR('',#280691); +#297713 = CURVE_STYLE('',#297714,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297715 = OVER_RIDING_STYLED_ITEM('overriding color',(#297716),#21610, + #297616); +#297716 = PRESENTATION_STYLE_ASSIGNMENT((#297717,#297722)); +#297717 = SURFACE_STYLE_USAGE(.BOTH.,#297718); +#297718 = SURFACE_SIDE_STYLE('',(#297719)); +#297719 = SURFACE_STYLE_FILL_AREA(#297720); +#297720 = FILL_AREA_STYLE('',(#297721)); +#297721 = FILL_AREA_STYLE_COLOUR('',#280691); +#297722 = CURVE_STYLE('',#297723,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297724 = OVER_RIDING_STYLED_ITEM('overriding color',(#297725),#21642, + #297616); +#297725 = PRESENTATION_STYLE_ASSIGNMENT((#297726,#297731)); +#297726 = SURFACE_STYLE_USAGE(.BOTH.,#297727); +#297727 = SURFACE_SIDE_STYLE('',(#297728)); +#297728 = SURFACE_STYLE_FILL_AREA(#297729); +#297729 = FILL_AREA_STYLE('',(#297730)); +#297730 = FILL_AREA_STYLE_COLOUR('',#280691); +#297731 = CURVE_STYLE('',#297732,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297733 = OVER_RIDING_STYLED_ITEM('overriding color',(#297734),#21676, + #297616); +#297734 = PRESENTATION_STYLE_ASSIGNMENT((#297735,#297740)); +#297735 = SURFACE_STYLE_USAGE(.BOTH.,#297736); +#297736 = SURFACE_SIDE_STYLE('',(#297737)); +#297737 = SURFACE_STYLE_FILL_AREA(#297738); +#297738 = FILL_AREA_STYLE('',(#297739)); +#297739 = FILL_AREA_STYLE_COLOUR('',#280691); +#297740 = CURVE_STYLE('',#297741,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297742 = OVER_RIDING_STYLED_ITEM('overriding color',(#297743),#21708, + #297616); +#297743 = PRESENTATION_STYLE_ASSIGNMENT((#297744,#297749)); +#297744 = SURFACE_STYLE_USAGE(.BOTH.,#297745); +#297745 = SURFACE_SIDE_STYLE('',(#297746)); +#297746 = SURFACE_STYLE_FILL_AREA(#297747); +#297747 = FILL_AREA_STYLE('',(#297748)); +#297748 = FILL_AREA_STYLE_COLOUR('',#280691); +#297749 = CURVE_STYLE('',#297750,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297751 = OVER_RIDING_STYLED_ITEM('overriding color',(#297752),#21742, + #297616); +#297752 = PRESENTATION_STYLE_ASSIGNMENT((#297753,#297758)); +#297753 = SURFACE_STYLE_USAGE(.BOTH.,#297754); +#297754 = SURFACE_SIDE_STYLE('',(#297755)); +#297755 = SURFACE_STYLE_FILL_AREA(#297756); +#297756 = FILL_AREA_STYLE('',(#297757)); +#297757 = FILL_AREA_STYLE_COLOUR('',#280691); +#297758 = CURVE_STYLE('',#297759,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297760 = OVER_RIDING_STYLED_ITEM('overriding color',(#297761),#21774, + #297616); +#297761 = PRESENTATION_STYLE_ASSIGNMENT((#297762,#297767)); +#297762 = SURFACE_STYLE_USAGE(.BOTH.,#297763); +#297763 = SURFACE_SIDE_STYLE('',(#297764)); +#297764 = SURFACE_STYLE_FILL_AREA(#297765); +#297765 = FILL_AREA_STYLE('',(#297766)); +#297766 = FILL_AREA_STYLE_COLOUR('',#280691); +#297767 = CURVE_STYLE('',#297768,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297769 = OVER_RIDING_STYLED_ITEM('overriding color',(#297770),#21808, + #297616); +#297770 = PRESENTATION_STYLE_ASSIGNMENT((#297771,#297776)); +#297771 = SURFACE_STYLE_USAGE(.BOTH.,#297772); +#297772 = SURFACE_SIDE_STYLE('',(#297773)); +#297773 = SURFACE_STYLE_FILL_AREA(#297774); +#297774 = FILL_AREA_STYLE('',(#297775)); +#297775 = FILL_AREA_STYLE_COLOUR('',#280691); +#297776 = CURVE_STYLE('',#297777,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297778 = OVER_RIDING_STYLED_ITEM('overriding color',(#297779),#21840, + #297616); +#297779 = PRESENTATION_STYLE_ASSIGNMENT((#297780,#297785)); +#297780 = SURFACE_STYLE_USAGE(.BOTH.,#297781); +#297781 = SURFACE_SIDE_STYLE('',(#297782)); +#297782 = SURFACE_STYLE_FILL_AREA(#297783); +#297783 = FILL_AREA_STYLE('',(#297784)); +#297784 = FILL_AREA_STYLE_COLOUR('',#280691); +#297785 = CURVE_STYLE('',#297786,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297787 = OVER_RIDING_STYLED_ITEM('overriding color',(#297788),#21874, + #297616); +#297788 = PRESENTATION_STYLE_ASSIGNMENT((#297789,#297794)); +#297789 = SURFACE_STYLE_USAGE(.BOTH.,#297790); +#297790 = SURFACE_SIDE_STYLE('',(#297791)); +#297791 = SURFACE_STYLE_FILL_AREA(#297792); +#297792 = FILL_AREA_STYLE('',(#297793)); +#297793 = FILL_AREA_STYLE_COLOUR('',#280691); +#297794 = CURVE_STYLE('',#297795,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297796 = OVER_RIDING_STYLED_ITEM('overriding color',(#297797),#21906, + #297616); +#297797 = PRESENTATION_STYLE_ASSIGNMENT((#297798,#297803)); +#297798 = SURFACE_STYLE_USAGE(.BOTH.,#297799); +#297799 = SURFACE_SIDE_STYLE('',(#297800)); +#297800 = SURFACE_STYLE_FILL_AREA(#297801); +#297801 = FILL_AREA_STYLE('',(#297802)); +#297802 = FILL_AREA_STYLE_COLOUR('',#280691); +#297803 = CURVE_STYLE('',#297804,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297805 = OVER_RIDING_STYLED_ITEM('overriding color',(#297806),#21940, + #297616); +#297806 = PRESENTATION_STYLE_ASSIGNMENT((#297807,#297812)); +#297807 = SURFACE_STYLE_USAGE(.BOTH.,#297808); +#297808 = SURFACE_SIDE_STYLE('',(#297809)); +#297809 = SURFACE_STYLE_FILL_AREA(#297810); +#297810 = FILL_AREA_STYLE('',(#297811)); +#297811 = FILL_AREA_STYLE_COLOUR('',#280691); +#297812 = CURVE_STYLE('',#297813,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297814 = OVER_RIDING_STYLED_ITEM('overriding color',(#297815),#21972, + #297616); +#297815 = PRESENTATION_STYLE_ASSIGNMENT((#297816,#297821)); +#297816 = SURFACE_STYLE_USAGE(.BOTH.,#297817); +#297817 = SURFACE_SIDE_STYLE('',(#297818)); +#297818 = SURFACE_STYLE_FILL_AREA(#297819); +#297819 = FILL_AREA_STYLE('',(#297820)); +#297820 = FILL_AREA_STYLE_COLOUR('',#280691); +#297821 = CURVE_STYLE('',#297822,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297823 = OVER_RIDING_STYLED_ITEM('overriding color',(#297824),#22006, + #297616); +#297824 = PRESENTATION_STYLE_ASSIGNMENT((#297825,#297830)); +#297825 = SURFACE_STYLE_USAGE(.BOTH.,#297826); +#297826 = SURFACE_SIDE_STYLE('',(#297827)); +#297827 = SURFACE_STYLE_FILL_AREA(#297828); +#297828 = FILL_AREA_STYLE('',(#297829)); +#297829 = FILL_AREA_STYLE_COLOUR('',#280691); +#297830 = CURVE_STYLE('',#297831,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297832 = OVER_RIDING_STYLED_ITEM('overriding color',(#297833),#22038, + #297616); +#297833 = PRESENTATION_STYLE_ASSIGNMENT((#297834,#297839)); +#297834 = SURFACE_STYLE_USAGE(.BOTH.,#297835); +#297835 = SURFACE_SIDE_STYLE('',(#297836)); +#297836 = SURFACE_STYLE_FILL_AREA(#297837); +#297837 = FILL_AREA_STYLE('',(#297838)); +#297838 = FILL_AREA_STYLE_COLOUR('',#280691); +#297839 = CURVE_STYLE('',#297840,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297841 = OVER_RIDING_STYLED_ITEM('overriding color',(#297842),#22072, + #297616); +#297842 = PRESENTATION_STYLE_ASSIGNMENT((#297843,#297848)); +#297843 = SURFACE_STYLE_USAGE(.BOTH.,#297844); +#297844 = SURFACE_SIDE_STYLE('',(#297845)); +#297845 = SURFACE_STYLE_FILL_AREA(#297846); +#297846 = FILL_AREA_STYLE('',(#297847)); +#297847 = FILL_AREA_STYLE_COLOUR('',#280691); +#297848 = CURVE_STYLE('',#297849,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297850 = OVER_RIDING_STYLED_ITEM('overriding color',(#297851),#22104, + #297616); +#297851 = PRESENTATION_STYLE_ASSIGNMENT((#297852,#297857)); +#297852 = SURFACE_STYLE_USAGE(.BOTH.,#297853); +#297853 = SURFACE_SIDE_STYLE('',(#297854)); +#297854 = SURFACE_STYLE_FILL_AREA(#297855); +#297855 = FILL_AREA_STYLE('',(#297856)); +#297856 = FILL_AREA_STYLE_COLOUR('',#280691); +#297857 = CURVE_STYLE('',#297858,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297859 = OVER_RIDING_STYLED_ITEM('overriding color',(#297860),#22138, + #297616); +#297860 = PRESENTATION_STYLE_ASSIGNMENT((#297861,#297866)); +#297861 = SURFACE_STYLE_USAGE(.BOTH.,#297862); +#297862 = SURFACE_SIDE_STYLE('',(#297863)); +#297863 = SURFACE_STYLE_FILL_AREA(#297864); +#297864 = FILL_AREA_STYLE('',(#297865)); +#297865 = FILL_AREA_STYLE_COLOUR('',#280691); +#297866 = CURVE_STYLE('',#297867,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297868 = OVER_RIDING_STYLED_ITEM('overriding color',(#297869),#22170, + #297616); +#297869 = PRESENTATION_STYLE_ASSIGNMENT((#297870,#297875)); +#297870 = SURFACE_STYLE_USAGE(.BOTH.,#297871); +#297871 = SURFACE_SIDE_STYLE('',(#297872)); +#297872 = SURFACE_STYLE_FILL_AREA(#297873); +#297873 = FILL_AREA_STYLE('',(#297874)); +#297874 = FILL_AREA_STYLE_COLOUR('',#280691); +#297875 = CURVE_STYLE('',#297876,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297877 = OVER_RIDING_STYLED_ITEM('overriding color',(#297878),#22204, + #297616); +#297878 = PRESENTATION_STYLE_ASSIGNMENT((#297879,#297884)); +#297879 = SURFACE_STYLE_USAGE(.BOTH.,#297880); +#297880 = SURFACE_SIDE_STYLE('',(#297881)); +#297881 = SURFACE_STYLE_FILL_AREA(#297882); +#297882 = FILL_AREA_STYLE('',(#297883)); +#297883 = FILL_AREA_STYLE_COLOUR('',#280691); +#297884 = CURVE_STYLE('',#297885,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297886 = OVER_RIDING_STYLED_ITEM('overriding color',(#297887),#22236, + #297616); +#297887 = PRESENTATION_STYLE_ASSIGNMENT((#297888,#297893)); +#297888 = SURFACE_STYLE_USAGE(.BOTH.,#297889); +#297889 = SURFACE_SIDE_STYLE('',(#297890)); +#297890 = SURFACE_STYLE_FILL_AREA(#297891); +#297891 = FILL_AREA_STYLE('',(#297892)); +#297892 = FILL_AREA_STYLE_COLOUR('',#280691); +#297893 = CURVE_STYLE('',#297894,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297895 = OVER_RIDING_STYLED_ITEM('overriding color',(#297896),#22270, + #297616); +#297896 = PRESENTATION_STYLE_ASSIGNMENT((#297897,#297902)); +#297897 = SURFACE_STYLE_USAGE(.BOTH.,#297898); +#297898 = SURFACE_SIDE_STYLE('',(#297899)); +#297899 = SURFACE_STYLE_FILL_AREA(#297900); +#297900 = FILL_AREA_STYLE('',(#297901)); +#297901 = FILL_AREA_STYLE_COLOUR('',#280691); +#297902 = CURVE_STYLE('',#297903,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297904 = OVER_RIDING_STYLED_ITEM('overriding color',(#297905),#22302, + #297616); +#297905 = PRESENTATION_STYLE_ASSIGNMENT((#297906,#297911)); +#297906 = SURFACE_STYLE_USAGE(.BOTH.,#297907); +#297907 = SURFACE_SIDE_STYLE('',(#297908)); +#297908 = SURFACE_STYLE_FILL_AREA(#297909); +#297909 = FILL_AREA_STYLE('',(#297910)); +#297910 = FILL_AREA_STYLE_COLOUR('',#280691); +#297911 = CURVE_STYLE('',#297912,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297913 = OVER_RIDING_STYLED_ITEM('overriding color',(#297914),#22336, + #297616); +#297914 = PRESENTATION_STYLE_ASSIGNMENT((#297915,#297920)); +#297915 = SURFACE_STYLE_USAGE(.BOTH.,#297916); +#297916 = SURFACE_SIDE_STYLE('',(#297917)); +#297917 = SURFACE_STYLE_FILL_AREA(#297918); +#297918 = FILL_AREA_STYLE('',(#297919)); +#297919 = FILL_AREA_STYLE_COLOUR('',#280691); +#297920 = CURVE_STYLE('',#297921,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297922 = OVER_RIDING_STYLED_ITEM('overriding color',(#297923),#22368, + #297616); +#297923 = PRESENTATION_STYLE_ASSIGNMENT((#297924,#297929)); +#297924 = SURFACE_STYLE_USAGE(.BOTH.,#297925); +#297925 = SURFACE_SIDE_STYLE('',(#297926)); +#297926 = SURFACE_STYLE_FILL_AREA(#297927); +#297927 = FILL_AREA_STYLE('',(#297928)); +#297928 = FILL_AREA_STYLE_COLOUR('',#280691); +#297929 = CURVE_STYLE('',#297930,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297931 = OVER_RIDING_STYLED_ITEM('overriding color',(#297932),#22402, + #297616); +#297932 = PRESENTATION_STYLE_ASSIGNMENT((#297933,#297938)); +#297933 = SURFACE_STYLE_USAGE(.BOTH.,#297934); +#297934 = SURFACE_SIDE_STYLE('',(#297935)); +#297935 = SURFACE_STYLE_FILL_AREA(#297936); +#297936 = FILL_AREA_STYLE('',(#297937)); +#297937 = FILL_AREA_STYLE_COLOUR('',#280691); +#297938 = CURVE_STYLE('',#297939,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297940 = OVER_RIDING_STYLED_ITEM('overriding color',(#297941),#22434, + #297616); +#297941 = PRESENTATION_STYLE_ASSIGNMENT((#297942,#297947)); +#297942 = SURFACE_STYLE_USAGE(.BOTH.,#297943); +#297943 = SURFACE_SIDE_STYLE('',(#297944)); +#297944 = SURFACE_STYLE_FILL_AREA(#297945); +#297945 = FILL_AREA_STYLE('',(#297946)); +#297946 = FILL_AREA_STYLE_COLOUR('',#280691); +#297947 = CURVE_STYLE('',#297948,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297949 = OVER_RIDING_STYLED_ITEM('overriding color',(#297950),#22468, + #297616); +#297950 = PRESENTATION_STYLE_ASSIGNMENT((#297951,#297956)); +#297951 = SURFACE_STYLE_USAGE(.BOTH.,#297952); +#297952 = SURFACE_SIDE_STYLE('',(#297953)); +#297953 = SURFACE_STYLE_FILL_AREA(#297954); +#297954 = FILL_AREA_STYLE('',(#297955)); +#297955 = FILL_AREA_STYLE_COLOUR('',#280691); +#297956 = CURVE_STYLE('',#297957,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297958 = OVER_RIDING_STYLED_ITEM('overriding color',(#297959),#22500, + #297616); +#297959 = PRESENTATION_STYLE_ASSIGNMENT((#297960,#297965)); +#297960 = SURFACE_STYLE_USAGE(.BOTH.,#297961); +#297961 = SURFACE_SIDE_STYLE('',(#297962)); +#297962 = SURFACE_STYLE_FILL_AREA(#297963); +#297963 = FILL_AREA_STYLE('',(#297964)); +#297964 = FILL_AREA_STYLE_COLOUR('',#280691); +#297965 = CURVE_STYLE('',#297966,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297967 = OVER_RIDING_STYLED_ITEM('overriding color',(#297968),#22534, + #297616); +#297968 = PRESENTATION_STYLE_ASSIGNMENT((#297969,#297974)); +#297969 = SURFACE_STYLE_USAGE(.BOTH.,#297970); +#297970 = SURFACE_SIDE_STYLE('',(#297971)); +#297971 = SURFACE_STYLE_FILL_AREA(#297972); +#297972 = FILL_AREA_STYLE('',(#297973)); +#297973 = FILL_AREA_STYLE_COLOUR('',#280691); +#297974 = CURVE_STYLE('',#297975,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297976 = OVER_RIDING_STYLED_ITEM('overriding color',(#297977),#22566, + #297616); +#297977 = PRESENTATION_STYLE_ASSIGNMENT((#297978,#297983)); +#297978 = SURFACE_STYLE_USAGE(.BOTH.,#297979); +#297979 = SURFACE_SIDE_STYLE('',(#297980)); +#297980 = SURFACE_STYLE_FILL_AREA(#297981); +#297981 = FILL_AREA_STYLE('',(#297982)); +#297982 = FILL_AREA_STYLE_COLOUR('',#280691); +#297983 = CURVE_STYLE('',#297984,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#297984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297985 = STYLED_ITEM('color',(#297986),#22584); +#297986 = PRESENTATION_STYLE_ASSIGNMENT((#297987,#297992)); +#297987 = SURFACE_STYLE_USAGE(.BOTH.,#297988); +#297988 = SURFACE_SIDE_STYLE('',(#297989)); +#297989 = SURFACE_STYLE_FILL_AREA(#297990); +#297990 = FILL_AREA_STYLE('',(#297991)); +#297991 = FILL_AREA_STYLE_COLOUR('',#279624); +#297992 = CURVE_STYLE('',#297993,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#297993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297994 = STYLED_ITEM('color',(#297995),#22596); +#297995 = PRESENTATION_STYLE_ASSIGNMENT((#297996,#298001)); +#297996 = SURFACE_STYLE_USAGE(.BOTH.,#297997); +#297997 = SURFACE_SIDE_STYLE('',(#297998)); +#297998 = SURFACE_STYLE_FILL_AREA(#297999); +#297999 = FILL_AREA_STYLE('',(#298000)); +#298000 = FILL_AREA_STYLE_COLOUR('',#279624); +#298001 = CURVE_STYLE('',#298002,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298003 = STYLED_ITEM('color',(#298004),#22608); +#298004 = PRESENTATION_STYLE_ASSIGNMENT((#298005,#298010)); +#298005 = SURFACE_STYLE_USAGE(.BOTH.,#298006); +#298006 = SURFACE_SIDE_STYLE('',(#298007)); +#298007 = SURFACE_STYLE_FILL_AREA(#298008); +#298008 = FILL_AREA_STYLE('',(#298009)); +#298009 = FILL_AREA_STYLE_COLOUR('',#279624); +#298010 = CURVE_STYLE('',#298011,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298012 = STYLED_ITEM('color',(#298013),#22639); +#298013 = PRESENTATION_STYLE_ASSIGNMENT((#298014,#298019)); +#298014 = SURFACE_STYLE_USAGE(.BOTH.,#298015); +#298015 = SURFACE_SIDE_STYLE('',(#298016)); +#298016 = SURFACE_STYLE_FILL_AREA(#298017); +#298017 = FILL_AREA_STYLE('',(#298018)); +#298018 = FILL_AREA_STYLE_COLOUR('',#279624); +#298019 = CURVE_STYLE('',#298020,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298021 = STYLED_ITEM('color',(#298022),#22663); +#298022 = PRESENTATION_STYLE_ASSIGNMENT((#298023,#298028)); +#298023 = SURFACE_STYLE_USAGE(.BOTH.,#298024); +#298024 = SURFACE_SIDE_STYLE('',(#298025)); +#298025 = SURFACE_STYLE_FILL_AREA(#298026); +#298026 = FILL_AREA_STYLE('',(#298027)); +#298027 = FILL_AREA_STYLE_COLOUR('',#279624); +#298028 = CURVE_STYLE('',#298029,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298030 = STYLED_ITEM('color',(#298031),#22687); +#298031 = PRESENTATION_STYLE_ASSIGNMENT((#298032,#298037)); +#298032 = SURFACE_STYLE_USAGE(.BOTH.,#298033); +#298033 = SURFACE_SIDE_STYLE('',(#298034)); +#298034 = SURFACE_STYLE_FILL_AREA(#298035); +#298035 = FILL_AREA_STYLE('',(#298036)); +#298036 = FILL_AREA_STYLE_COLOUR('',#279624); +#298037 = CURVE_STYLE('',#298038,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298039 = STYLED_ITEM('color',(#298040),#22704); +#298040 = PRESENTATION_STYLE_ASSIGNMENT((#298041,#298046)); +#298041 = SURFACE_STYLE_USAGE(.BOTH.,#298042); +#298042 = SURFACE_SIDE_STYLE('',(#298043)); +#298043 = SURFACE_STYLE_FILL_AREA(#298044); +#298044 = FILL_AREA_STYLE('',(#298045)); +#298045 = FILL_AREA_STYLE_COLOUR('',#279624); +#298046 = CURVE_STYLE('',#298047,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298048 = STYLED_ITEM('color',(#298049),#22735); +#298049 = PRESENTATION_STYLE_ASSIGNMENT((#298050,#298055)); +#298050 = SURFACE_STYLE_USAGE(.BOTH.,#298051); +#298051 = SURFACE_SIDE_STYLE('',(#298052)); +#298052 = SURFACE_STYLE_FILL_AREA(#298053); +#298053 = FILL_AREA_STYLE('',(#298054)); +#298054 = FILL_AREA_STYLE_COLOUR('',#279624); +#298055 = CURVE_STYLE('',#298056,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298057 = STYLED_ITEM('color',(#298058),#22759); +#298058 = PRESENTATION_STYLE_ASSIGNMENT((#298059,#298064)); +#298059 = SURFACE_STYLE_USAGE(.BOTH.,#298060); +#298060 = SURFACE_SIDE_STYLE('',(#298061)); +#298061 = SURFACE_STYLE_FILL_AREA(#298062); +#298062 = FILL_AREA_STYLE('',(#298063)); +#298063 = FILL_AREA_STYLE_COLOUR('',#279624); +#298064 = CURVE_STYLE('',#298065,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298066 = STYLED_ITEM('color',(#298067),#22783); +#298067 = PRESENTATION_STYLE_ASSIGNMENT((#298068,#298073)); +#298068 = SURFACE_STYLE_USAGE(.BOTH.,#298069); +#298069 = SURFACE_SIDE_STYLE('',(#298070)); +#298070 = SURFACE_STYLE_FILL_AREA(#298071); +#298071 = FILL_AREA_STYLE('',(#298072)); +#298072 = FILL_AREA_STYLE_COLOUR('',#279624); +#298073 = CURVE_STYLE('',#298074,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298075 = STYLED_ITEM('color',(#298076),#22800); +#298076 = PRESENTATION_STYLE_ASSIGNMENT((#298077,#298082)); +#298077 = SURFACE_STYLE_USAGE(.BOTH.,#298078); +#298078 = SURFACE_SIDE_STYLE('',(#298079)); +#298079 = SURFACE_STYLE_FILL_AREA(#298080); +#298080 = FILL_AREA_STYLE('',(#298081)); +#298081 = FILL_AREA_STYLE_COLOUR('',#279624); +#298082 = CURVE_STYLE('',#298083,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298084 = STYLED_ITEM('color',(#298085),#22831); +#298085 = PRESENTATION_STYLE_ASSIGNMENT((#298086,#298091)); +#298086 = SURFACE_STYLE_USAGE(.BOTH.,#298087); +#298087 = SURFACE_SIDE_STYLE('',(#298088)); +#298088 = SURFACE_STYLE_FILL_AREA(#298089); +#298089 = FILL_AREA_STYLE('',(#298090)); +#298090 = FILL_AREA_STYLE_COLOUR('',#279624); +#298091 = CURVE_STYLE('',#298092,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298093 = STYLED_ITEM('color',(#298094),#22855); +#298094 = PRESENTATION_STYLE_ASSIGNMENT((#298095,#298100)); +#298095 = SURFACE_STYLE_USAGE(.BOTH.,#298096); +#298096 = SURFACE_SIDE_STYLE('',(#298097)); +#298097 = SURFACE_STYLE_FILL_AREA(#298098); +#298098 = FILL_AREA_STYLE('',(#298099)); +#298099 = FILL_AREA_STYLE_COLOUR('',#279624); +#298100 = CURVE_STYLE('',#298101,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298102 = STYLED_ITEM('color',(#298103),#22879); +#298103 = PRESENTATION_STYLE_ASSIGNMENT((#298104,#298109)); +#298104 = SURFACE_STYLE_USAGE(.BOTH.,#298105); +#298105 = SURFACE_SIDE_STYLE('',(#298106)); +#298106 = SURFACE_STYLE_FILL_AREA(#298107); +#298107 = FILL_AREA_STYLE('',(#298108)); +#298108 = FILL_AREA_STYLE_COLOUR('',#279624); +#298109 = CURVE_STYLE('',#298110,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298111 = STYLED_ITEM('color',(#298112),#22896); +#298112 = PRESENTATION_STYLE_ASSIGNMENT((#298113,#298118)); +#298113 = SURFACE_STYLE_USAGE(.BOTH.,#298114); +#298114 = SURFACE_SIDE_STYLE('',(#298115)); +#298115 = SURFACE_STYLE_FILL_AREA(#298116); +#298116 = FILL_AREA_STYLE('',(#298117)); +#298117 = FILL_AREA_STYLE_COLOUR('',#279624); +#298118 = CURVE_STYLE('',#298119,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298120 = STYLED_ITEM('color',(#298121),#22927); +#298121 = PRESENTATION_STYLE_ASSIGNMENT((#298122,#298127)); +#298122 = SURFACE_STYLE_USAGE(.BOTH.,#298123); +#298123 = SURFACE_SIDE_STYLE('',(#298124)); +#298124 = SURFACE_STYLE_FILL_AREA(#298125); +#298125 = FILL_AREA_STYLE('',(#298126)); +#298126 = FILL_AREA_STYLE_COLOUR('',#279624); +#298127 = CURVE_STYLE('',#298128,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298129 = STYLED_ITEM('color',(#298130),#22951); +#298130 = PRESENTATION_STYLE_ASSIGNMENT((#298131,#298136)); +#298131 = SURFACE_STYLE_USAGE(.BOTH.,#298132); +#298132 = SURFACE_SIDE_STYLE('',(#298133)); +#298133 = SURFACE_STYLE_FILL_AREA(#298134); +#298134 = FILL_AREA_STYLE('',(#298135)); +#298135 = FILL_AREA_STYLE_COLOUR('',#279624); +#298136 = CURVE_STYLE('',#298137,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298138 = STYLED_ITEM('color',(#298139),#22975); +#298139 = PRESENTATION_STYLE_ASSIGNMENT((#298140,#298145)); +#298140 = SURFACE_STYLE_USAGE(.BOTH.,#298141); +#298141 = SURFACE_SIDE_STYLE('',(#298142)); +#298142 = SURFACE_STYLE_FILL_AREA(#298143); +#298143 = FILL_AREA_STYLE('',(#298144)); +#298144 = FILL_AREA_STYLE_COLOUR('',#279624); +#298145 = CURVE_STYLE('',#298146,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298147 = STYLED_ITEM('color',(#298148),#22992); +#298148 = PRESENTATION_STYLE_ASSIGNMENT((#298149,#298154)); +#298149 = SURFACE_STYLE_USAGE(.BOTH.,#298150); +#298150 = SURFACE_SIDE_STYLE('',(#298151)); +#298151 = SURFACE_STYLE_FILL_AREA(#298152); +#298152 = FILL_AREA_STYLE('',(#298153)); +#298153 = FILL_AREA_STYLE_COLOUR('',#279624); +#298154 = CURVE_STYLE('',#298155,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298156 = STYLED_ITEM('color',(#298157),#23023); +#298157 = PRESENTATION_STYLE_ASSIGNMENT((#298158,#298163)); +#298158 = SURFACE_STYLE_USAGE(.BOTH.,#298159); +#298159 = SURFACE_SIDE_STYLE('',(#298160)); +#298160 = SURFACE_STYLE_FILL_AREA(#298161); +#298161 = FILL_AREA_STYLE('',(#298162)); +#298162 = FILL_AREA_STYLE_COLOUR('',#279624); +#298163 = CURVE_STYLE('',#298164,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298165 = STYLED_ITEM('color',(#298166),#23047); +#298166 = PRESENTATION_STYLE_ASSIGNMENT((#298167,#298172)); +#298167 = SURFACE_STYLE_USAGE(.BOTH.,#298168); +#298168 = SURFACE_SIDE_STYLE('',(#298169)); +#298169 = SURFACE_STYLE_FILL_AREA(#298170); +#298170 = FILL_AREA_STYLE('',(#298171)); +#298171 = FILL_AREA_STYLE_COLOUR('',#279624); +#298172 = CURVE_STYLE('',#298173,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298174 = STYLED_ITEM('color',(#298175),#23071); +#298175 = PRESENTATION_STYLE_ASSIGNMENT((#298176,#298181)); +#298176 = SURFACE_STYLE_USAGE(.BOTH.,#298177); +#298177 = SURFACE_SIDE_STYLE('',(#298178)); +#298178 = SURFACE_STYLE_FILL_AREA(#298179); +#298179 = FILL_AREA_STYLE('',(#298180)); +#298180 = FILL_AREA_STYLE_COLOUR('',#279624); +#298181 = CURVE_STYLE('',#298182,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298183 = STYLED_ITEM('color',(#298184),#23088); +#298184 = PRESENTATION_STYLE_ASSIGNMENT((#298185,#298190)); +#298185 = SURFACE_STYLE_USAGE(.BOTH.,#298186); +#298186 = SURFACE_SIDE_STYLE('',(#298187)); +#298187 = SURFACE_STYLE_FILL_AREA(#298188); +#298188 = FILL_AREA_STYLE('',(#298189)); +#298189 = FILL_AREA_STYLE_COLOUR('',#279624); +#298190 = CURVE_STYLE('',#298191,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298192 = STYLED_ITEM('color',(#298193),#23119); +#298193 = PRESENTATION_STYLE_ASSIGNMENT((#298194,#298199)); +#298194 = SURFACE_STYLE_USAGE(.BOTH.,#298195); +#298195 = SURFACE_SIDE_STYLE('',(#298196)); +#298196 = SURFACE_STYLE_FILL_AREA(#298197); +#298197 = FILL_AREA_STYLE('',(#298198)); +#298198 = FILL_AREA_STYLE_COLOUR('',#279624); +#298199 = CURVE_STYLE('',#298200,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298201 = STYLED_ITEM('color',(#298202),#23143); +#298202 = PRESENTATION_STYLE_ASSIGNMENT((#298203,#298208)); +#298203 = SURFACE_STYLE_USAGE(.BOTH.,#298204); +#298204 = SURFACE_SIDE_STYLE('',(#298205)); +#298205 = SURFACE_STYLE_FILL_AREA(#298206); +#298206 = FILL_AREA_STYLE('',(#298207)); +#298207 = FILL_AREA_STYLE_COLOUR('',#279624); +#298208 = CURVE_STYLE('',#298209,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298210 = STYLED_ITEM('color',(#298211),#23167); +#298211 = PRESENTATION_STYLE_ASSIGNMENT((#298212,#298217)); +#298212 = SURFACE_STYLE_USAGE(.BOTH.,#298213); +#298213 = SURFACE_SIDE_STYLE('',(#298214)); +#298214 = SURFACE_STYLE_FILL_AREA(#298215); +#298215 = FILL_AREA_STYLE('',(#298216)); +#298216 = FILL_AREA_STYLE_COLOUR('',#279624); +#298217 = CURVE_STYLE('',#298218,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298219 = STYLED_ITEM('color',(#298220),#23184); +#298220 = PRESENTATION_STYLE_ASSIGNMENT((#298221,#298226)); +#298221 = SURFACE_STYLE_USAGE(.BOTH.,#298222); +#298222 = SURFACE_SIDE_STYLE('',(#298223)); +#298223 = SURFACE_STYLE_FILL_AREA(#298224); +#298224 = FILL_AREA_STYLE('',(#298225)); +#298225 = FILL_AREA_STYLE_COLOUR('',#279624); +#298226 = CURVE_STYLE('',#298227,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298228 = STYLED_ITEM('color',(#298229),#23215); +#298229 = PRESENTATION_STYLE_ASSIGNMENT((#298230,#298235)); +#298230 = SURFACE_STYLE_USAGE(.BOTH.,#298231); +#298231 = SURFACE_SIDE_STYLE('',(#298232)); +#298232 = SURFACE_STYLE_FILL_AREA(#298233); +#298233 = FILL_AREA_STYLE('',(#298234)); +#298234 = FILL_AREA_STYLE_COLOUR('',#279624); +#298235 = CURVE_STYLE('',#298236,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298237 = STYLED_ITEM('color',(#298238),#23239); +#298238 = PRESENTATION_STYLE_ASSIGNMENT((#298239,#298244)); +#298239 = SURFACE_STYLE_USAGE(.BOTH.,#298240); +#298240 = SURFACE_SIDE_STYLE('',(#298241)); +#298241 = SURFACE_STYLE_FILL_AREA(#298242); +#298242 = FILL_AREA_STYLE('',(#298243)); +#298243 = FILL_AREA_STYLE_COLOUR('',#279624); +#298244 = CURVE_STYLE('',#298245,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298246 = STYLED_ITEM('color',(#298247),#23263); +#298247 = PRESENTATION_STYLE_ASSIGNMENT((#298248,#298253)); +#298248 = SURFACE_STYLE_USAGE(.BOTH.,#298249); +#298249 = SURFACE_SIDE_STYLE('',(#298250)); +#298250 = SURFACE_STYLE_FILL_AREA(#298251); +#298251 = FILL_AREA_STYLE('',(#298252)); +#298252 = FILL_AREA_STYLE_COLOUR('',#279624); +#298253 = CURVE_STYLE('',#298254,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298255 = STYLED_ITEM('color',(#298256),#23280); +#298256 = PRESENTATION_STYLE_ASSIGNMENT((#298257,#298262)); +#298257 = SURFACE_STYLE_USAGE(.BOTH.,#298258); +#298258 = SURFACE_SIDE_STYLE('',(#298259)); +#298259 = SURFACE_STYLE_FILL_AREA(#298260); +#298260 = FILL_AREA_STYLE('',(#298261)); +#298261 = FILL_AREA_STYLE_COLOUR('',#279624); +#298262 = CURVE_STYLE('',#298263,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298264 = STYLED_ITEM('color',(#298265),#23311); +#298265 = PRESENTATION_STYLE_ASSIGNMENT((#298266,#298271)); +#298266 = SURFACE_STYLE_USAGE(.BOTH.,#298267); +#298267 = SURFACE_SIDE_STYLE('',(#298268)); +#298268 = SURFACE_STYLE_FILL_AREA(#298269); +#298269 = FILL_AREA_STYLE('',(#298270)); +#298270 = FILL_AREA_STYLE_COLOUR('',#279624); +#298271 = CURVE_STYLE('',#298272,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298273 = STYLED_ITEM('color',(#298274),#23335); +#298274 = PRESENTATION_STYLE_ASSIGNMENT((#298275,#298280)); +#298275 = SURFACE_STYLE_USAGE(.BOTH.,#298276); +#298276 = SURFACE_SIDE_STYLE('',(#298277)); +#298277 = SURFACE_STYLE_FILL_AREA(#298278); +#298278 = FILL_AREA_STYLE('',(#298279)); +#298279 = FILL_AREA_STYLE_COLOUR('',#279624); +#298280 = CURVE_STYLE('',#298281,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298282 = STYLED_ITEM('color',(#298283),#23359); +#298283 = PRESENTATION_STYLE_ASSIGNMENT((#298284,#298289)); +#298284 = SURFACE_STYLE_USAGE(.BOTH.,#298285); +#298285 = SURFACE_SIDE_STYLE('',(#298286)); +#298286 = SURFACE_STYLE_FILL_AREA(#298287); +#298287 = FILL_AREA_STYLE('',(#298288)); +#298288 = FILL_AREA_STYLE_COLOUR('',#279624); +#298289 = CURVE_STYLE('',#298290,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298291 = STYLED_ITEM('color',(#298292),#23376); +#298292 = PRESENTATION_STYLE_ASSIGNMENT((#298293,#298298)); +#298293 = SURFACE_STYLE_USAGE(.BOTH.,#298294); +#298294 = SURFACE_SIDE_STYLE('',(#298295)); +#298295 = SURFACE_STYLE_FILL_AREA(#298296); +#298296 = FILL_AREA_STYLE('',(#298297)); +#298297 = FILL_AREA_STYLE_COLOUR('',#279624); +#298298 = CURVE_STYLE('',#298299,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298300 = STYLED_ITEM('color',(#298301),#23407); +#298301 = PRESENTATION_STYLE_ASSIGNMENT((#298302,#298307)); +#298302 = SURFACE_STYLE_USAGE(.BOTH.,#298303); +#298303 = SURFACE_SIDE_STYLE('',(#298304)); +#298304 = SURFACE_STYLE_FILL_AREA(#298305); +#298305 = FILL_AREA_STYLE('',(#298306)); +#298306 = FILL_AREA_STYLE_COLOUR('',#279624); +#298307 = CURVE_STYLE('',#298308,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298309 = STYLED_ITEM('color',(#298310),#23431); +#298310 = PRESENTATION_STYLE_ASSIGNMENT((#298311,#298316)); +#298311 = SURFACE_STYLE_USAGE(.BOTH.,#298312); +#298312 = SURFACE_SIDE_STYLE('',(#298313)); +#298313 = SURFACE_STYLE_FILL_AREA(#298314); +#298314 = FILL_AREA_STYLE('',(#298315)); +#298315 = FILL_AREA_STYLE_COLOUR('',#279624); +#298316 = CURVE_STYLE('',#298317,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298318 = STYLED_ITEM('color',(#298319),#23455); +#298319 = PRESENTATION_STYLE_ASSIGNMENT((#298320,#298325)); +#298320 = SURFACE_STYLE_USAGE(.BOTH.,#298321); +#298321 = SURFACE_SIDE_STYLE('',(#298322)); +#298322 = SURFACE_STYLE_FILL_AREA(#298323); +#298323 = FILL_AREA_STYLE('',(#298324)); +#298324 = FILL_AREA_STYLE_COLOUR('',#279624); +#298325 = CURVE_STYLE('',#298326,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298327 = STYLED_ITEM('color',(#298328),#23472); +#298328 = PRESENTATION_STYLE_ASSIGNMENT((#298329,#298334)); +#298329 = SURFACE_STYLE_USAGE(.BOTH.,#298330); +#298330 = SURFACE_SIDE_STYLE('',(#298331)); +#298331 = SURFACE_STYLE_FILL_AREA(#298332); +#298332 = FILL_AREA_STYLE('',(#298333)); +#298333 = FILL_AREA_STYLE_COLOUR('',#279624); +#298334 = CURVE_STYLE('',#298335,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298336 = STYLED_ITEM('color',(#298337),#23503); +#298337 = PRESENTATION_STYLE_ASSIGNMENT((#298338,#298343)); +#298338 = SURFACE_STYLE_USAGE(.BOTH.,#298339); +#298339 = SURFACE_SIDE_STYLE('',(#298340)); +#298340 = SURFACE_STYLE_FILL_AREA(#298341); +#298341 = FILL_AREA_STYLE('',(#298342)); +#298342 = FILL_AREA_STYLE_COLOUR('',#279624); +#298343 = CURVE_STYLE('',#298344,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298345 = STYLED_ITEM('color',(#298346),#23527); +#298346 = PRESENTATION_STYLE_ASSIGNMENT((#298347,#298352)); +#298347 = SURFACE_STYLE_USAGE(.BOTH.,#298348); +#298348 = SURFACE_SIDE_STYLE('',(#298349)); +#298349 = SURFACE_STYLE_FILL_AREA(#298350); +#298350 = FILL_AREA_STYLE('',(#298351)); +#298351 = FILL_AREA_STYLE_COLOUR('',#279624); +#298352 = CURVE_STYLE('',#298353,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298354 = STYLED_ITEM('color',(#298355),#23551); +#298355 = PRESENTATION_STYLE_ASSIGNMENT((#298356,#298361)); +#298356 = SURFACE_STYLE_USAGE(.BOTH.,#298357); +#298357 = SURFACE_SIDE_STYLE('',(#298358)); +#298358 = SURFACE_STYLE_FILL_AREA(#298359); +#298359 = FILL_AREA_STYLE('',(#298360)); +#298360 = FILL_AREA_STYLE_COLOUR('',#279624); +#298361 = CURVE_STYLE('',#298362,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298363 = STYLED_ITEM('color',(#298364),#23568); +#298364 = PRESENTATION_STYLE_ASSIGNMENT((#298365,#298370)); +#298365 = SURFACE_STYLE_USAGE(.BOTH.,#298366); +#298366 = SURFACE_SIDE_STYLE('',(#298367)); +#298367 = SURFACE_STYLE_FILL_AREA(#298368); +#298368 = FILL_AREA_STYLE('',(#298369)); +#298369 = FILL_AREA_STYLE_COLOUR('',#279624); +#298370 = CURVE_STYLE('',#298371,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298372 = STYLED_ITEM('color',(#298373),#23599); +#298373 = PRESENTATION_STYLE_ASSIGNMENT((#298374,#298379)); +#298374 = SURFACE_STYLE_USAGE(.BOTH.,#298375); +#298375 = SURFACE_SIDE_STYLE('',(#298376)); +#298376 = SURFACE_STYLE_FILL_AREA(#298377); +#298377 = FILL_AREA_STYLE('',(#298378)); +#298378 = FILL_AREA_STYLE_COLOUR('',#279624); +#298379 = CURVE_STYLE('',#298380,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298381 = STYLED_ITEM('color',(#298382),#23623); +#298382 = PRESENTATION_STYLE_ASSIGNMENT((#298383,#298388)); +#298383 = SURFACE_STYLE_USAGE(.BOTH.,#298384); +#298384 = SURFACE_SIDE_STYLE('',(#298385)); +#298385 = SURFACE_STYLE_FILL_AREA(#298386); +#298386 = FILL_AREA_STYLE('',(#298387)); +#298387 = FILL_AREA_STYLE_COLOUR('',#279624); +#298388 = CURVE_STYLE('',#298389,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298390 = STYLED_ITEM('color',(#298391),#23647); +#298391 = PRESENTATION_STYLE_ASSIGNMENT((#298392,#298397)); +#298392 = SURFACE_STYLE_USAGE(.BOTH.,#298393); +#298393 = SURFACE_SIDE_STYLE('',(#298394)); +#298394 = SURFACE_STYLE_FILL_AREA(#298395); +#298395 = FILL_AREA_STYLE('',(#298396)); +#298396 = FILL_AREA_STYLE_COLOUR('',#279624); +#298397 = CURVE_STYLE('',#298398,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298399 = STYLED_ITEM('color',(#298400),#23664); +#298400 = PRESENTATION_STYLE_ASSIGNMENT((#298401,#298406)); +#298401 = SURFACE_STYLE_USAGE(.BOTH.,#298402); +#298402 = SURFACE_SIDE_STYLE('',(#298403)); +#298403 = SURFACE_STYLE_FILL_AREA(#298404); +#298404 = FILL_AREA_STYLE('',(#298405)); +#298405 = FILL_AREA_STYLE_COLOUR('',#279624); +#298406 = CURVE_STYLE('',#298407,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298408 = STYLED_ITEM('color',(#298409),#23695); +#298409 = PRESENTATION_STYLE_ASSIGNMENT((#298410,#298415)); +#298410 = SURFACE_STYLE_USAGE(.BOTH.,#298411); +#298411 = SURFACE_SIDE_STYLE('',(#298412)); +#298412 = SURFACE_STYLE_FILL_AREA(#298413); +#298413 = FILL_AREA_STYLE('',(#298414)); +#298414 = FILL_AREA_STYLE_COLOUR('',#279624); +#298415 = CURVE_STYLE('',#298416,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298417 = STYLED_ITEM('color',(#298418),#23719); +#298418 = PRESENTATION_STYLE_ASSIGNMENT((#298419,#298424)); +#298419 = SURFACE_STYLE_USAGE(.BOTH.,#298420); +#298420 = SURFACE_SIDE_STYLE('',(#298421)); +#298421 = SURFACE_STYLE_FILL_AREA(#298422); +#298422 = FILL_AREA_STYLE('',(#298423)); +#298423 = FILL_AREA_STYLE_COLOUR('',#279624); +#298424 = CURVE_STYLE('',#298425,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298426 = STYLED_ITEM('color',(#298427),#23743); +#298427 = PRESENTATION_STYLE_ASSIGNMENT((#298428,#298433)); +#298428 = SURFACE_STYLE_USAGE(.BOTH.,#298429); +#298429 = SURFACE_SIDE_STYLE('',(#298430)); +#298430 = SURFACE_STYLE_FILL_AREA(#298431); +#298431 = FILL_AREA_STYLE('',(#298432)); +#298432 = FILL_AREA_STYLE_COLOUR('',#279624); +#298433 = CURVE_STYLE('',#298434,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298435 = STYLED_ITEM('color',(#298436),#23760); +#298436 = PRESENTATION_STYLE_ASSIGNMENT((#298437,#298442)); +#298437 = SURFACE_STYLE_USAGE(.BOTH.,#298438); +#298438 = SURFACE_SIDE_STYLE('',(#298439)); +#298439 = SURFACE_STYLE_FILL_AREA(#298440); +#298440 = FILL_AREA_STYLE('',(#298441)); +#298441 = FILL_AREA_STYLE_COLOUR('',#279624); +#298442 = CURVE_STYLE('',#298443,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298444 = STYLED_ITEM('color',(#298445),#23791); +#298445 = PRESENTATION_STYLE_ASSIGNMENT((#298446,#298451)); +#298446 = SURFACE_STYLE_USAGE(.BOTH.,#298447); +#298447 = SURFACE_SIDE_STYLE('',(#298448)); +#298448 = SURFACE_STYLE_FILL_AREA(#298449); +#298449 = FILL_AREA_STYLE('',(#298450)); +#298450 = FILL_AREA_STYLE_COLOUR('',#279624); +#298451 = CURVE_STYLE('',#298452,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298453 = STYLED_ITEM('color',(#298454),#23815); +#298454 = PRESENTATION_STYLE_ASSIGNMENT((#298455,#298460)); +#298455 = SURFACE_STYLE_USAGE(.BOTH.,#298456); +#298456 = SURFACE_SIDE_STYLE('',(#298457)); +#298457 = SURFACE_STYLE_FILL_AREA(#298458); +#298458 = FILL_AREA_STYLE('',(#298459)); +#298459 = FILL_AREA_STYLE_COLOUR('',#279624); +#298460 = CURVE_STYLE('',#298461,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298462 = STYLED_ITEM('color',(#298463),#23839); +#298463 = PRESENTATION_STYLE_ASSIGNMENT((#298464,#298469)); +#298464 = SURFACE_STYLE_USAGE(.BOTH.,#298465); +#298465 = SURFACE_SIDE_STYLE('',(#298466)); +#298466 = SURFACE_STYLE_FILL_AREA(#298467); +#298467 = FILL_AREA_STYLE('',(#298468)); +#298468 = FILL_AREA_STYLE_COLOUR('',#279624); +#298469 = CURVE_STYLE('',#298470,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298471 = STYLED_ITEM('color',(#298472),#23856); +#298472 = PRESENTATION_STYLE_ASSIGNMENT((#298473,#298478)); +#298473 = SURFACE_STYLE_USAGE(.BOTH.,#298474); +#298474 = SURFACE_SIDE_STYLE('',(#298475)); +#298475 = SURFACE_STYLE_FILL_AREA(#298476); +#298476 = FILL_AREA_STYLE('',(#298477)); +#298477 = FILL_AREA_STYLE_COLOUR('',#279624); +#298478 = CURVE_STYLE('',#298479,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298480 = STYLED_ITEM('color',(#298481),#23887); +#298481 = PRESENTATION_STYLE_ASSIGNMENT((#298482,#298487)); +#298482 = SURFACE_STYLE_USAGE(.BOTH.,#298483); +#298483 = SURFACE_SIDE_STYLE('',(#298484)); +#298484 = SURFACE_STYLE_FILL_AREA(#298485); +#298485 = FILL_AREA_STYLE('',(#298486)); +#298486 = FILL_AREA_STYLE_COLOUR('',#279624); +#298487 = CURVE_STYLE('',#298488,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298489 = STYLED_ITEM('color',(#298490),#23911); +#298490 = PRESENTATION_STYLE_ASSIGNMENT((#298491,#298496)); +#298491 = SURFACE_STYLE_USAGE(.BOTH.,#298492); +#298492 = SURFACE_SIDE_STYLE('',(#298493)); +#298493 = SURFACE_STYLE_FILL_AREA(#298494); +#298494 = FILL_AREA_STYLE('',(#298495)); +#298495 = FILL_AREA_STYLE_COLOUR('',#279624); +#298496 = CURVE_STYLE('',#298497,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298498 = STYLED_ITEM('color',(#298499),#23935); +#298499 = PRESENTATION_STYLE_ASSIGNMENT((#298500,#298505)); +#298500 = SURFACE_STYLE_USAGE(.BOTH.,#298501); +#298501 = SURFACE_SIDE_STYLE('',(#298502)); +#298502 = SURFACE_STYLE_FILL_AREA(#298503); +#298503 = FILL_AREA_STYLE('',(#298504)); +#298504 = FILL_AREA_STYLE_COLOUR('',#279624); +#298505 = CURVE_STYLE('',#298506,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298507 = STYLED_ITEM('color',(#298508),#23952); +#298508 = PRESENTATION_STYLE_ASSIGNMENT((#298509,#298514)); +#298509 = SURFACE_STYLE_USAGE(.BOTH.,#298510); +#298510 = SURFACE_SIDE_STYLE('',(#298511)); +#298511 = SURFACE_STYLE_FILL_AREA(#298512); +#298512 = FILL_AREA_STYLE('',(#298513)); +#298513 = FILL_AREA_STYLE_COLOUR('',#279624); +#298514 = CURVE_STYLE('',#298515,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298516 = STYLED_ITEM('color',(#298517),#23983); +#298517 = PRESENTATION_STYLE_ASSIGNMENT((#298518,#298523)); +#298518 = SURFACE_STYLE_USAGE(.BOTH.,#298519); +#298519 = SURFACE_SIDE_STYLE('',(#298520)); +#298520 = SURFACE_STYLE_FILL_AREA(#298521); +#298521 = FILL_AREA_STYLE('',(#298522)); +#298522 = FILL_AREA_STYLE_COLOUR('',#279624); +#298523 = CURVE_STYLE('',#298524,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298525 = STYLED_ITEM('color',(#298526),#24007); +#298526 = PRESENTATION_STYLE_ASSIGNMENT((#298527,#298532)); +#298527 = SURFACE_STYLE_USAGE(.BOTH.,#298528); +#298528 = SURFACE_SIDE_STYLE('',(#298529)); +#298529 = SURFACE_STYLE_FILL_AREA(#298530); +#298530 = FILL_AREA_STYLE('',(#298531)); +#298531 = FILL_AREA_STYLE_COLOUR('',#279624); +#298532 = CURVE_STYLE('',#298533,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298534 = STYLED_ITEM('color',(#298535),#24031); +#298535 = PRESENTATION_STYLE_ASSIGNMENT((#298536,#298541)); +#298536 = SURFACE_STYLE_USAGE(.BOTH.,#298537); +#298537 = SURFACE_SIDE_STYLE('',(#298538)); +#298538 = SURFACE_STYLE_FILL_AREA(#298539); +#298539 = FILL_AREA_STYLE('',(#298540)); +#298540 = FILL_AREA_STYLE_COLOUR('',#279624); +#298541 = CURVE_STYLE('',#298542,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298543 = STYLED_ITEM('color',(#298544),#24048); +#298544 = PRESENTATION_STYLE_ASSIGNMENT((#298545,#298550)); +#298545 = SURFACE_STYLE_USAGE(.BOTH.,#298546); +#298546 = SURFACE_SIDE_STYLE('',(#298547)); +#298547 = SURFACE_STYLE_FILL_AREA(#298548); +#298548 = FILL_AREA_STYLE('',(#298549)); +#298549 = FILL_AREA_STYLE_COLOUR('',#279624); +#298550 = CURVE_STYLE('',#298551,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298552 = STYLED_ITEM('color',(#298553),#24079); +#298553 = PRESENTATION_STYLE_ASSIGNMENT((#298554,#298559)); +#298554 = SURFACE_STYLE_USAGE(.BOTH.,#298555); +#298555 = SURFACE_SIDE_STYLE('',(#298556)); +#298556 = SURFACE_STYLE_FILL_AREA(#298557); +#298557 = FILL_AREA_STYLE('',(#298558)); +#298558 = FILL_AREA_STYLE_COLOUR('',#279624); +#298559 = CURVE_STYLE('',#298560,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298561 = STYLED_ITEM('color',(#298562),#24103); +#298562 = PRESENTATION_STYLE_ASSIGNMENT((#298563,#298568)); +#298563 = SURFACE_STYLE_USAGE(.BOTH.,#298564); +#298564 = SURFACE_SIDE_STYLE('',(#298565)); +#298565 = SURFACE_STYLE_FILL_AREA(#298566); +#298566 = FILL_AREA_STYLE('',(#298567)); +#298567 = FILL_AREA_STYLE_COLOUR('',#279624); +#298568 = CURVE_STYLE('',#298569,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298570 = STYLED_ITEM('color',(#298571),#24127); +#298571 = PRESENTATION_STYLE_ASSIGNMENT((#298572,#298577)); +#298572 = SURFACE_STYLE_USAGE(.BOTH.,#298573); +#298573 = SURFACE_SIDE_STYLE('',(#298574)); +#298574 = SURFACE_STYLE_FILL_AREA(#298575); +#298575 = FILL_AREA_STYLE('',(#298576)); +#298576 = FILL_AREA_STYLE_COLOUR('',#279624); +#298577 = CURVE_STYLE('',#298578,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298579 = STYLED_ITEM('color',(#298580),#24144); +#298580 = PRESENTATION_STYLE_ASSIGNMENT((#298581,#298586)); +#298581 = SURFACE_STYLE_USAGE(.BOTH.,#298582); +#298582 = SURFACE_SIDE_STYLE('',(#298583)); +#298583 = SURFACE_STYLE_FILL_AREA(#298584); +#298584 = FILL_AREA_STYLE('',(#298585)); +#298585 = FILL_AREA_STYLE_COLOUR('',#279624); +#298586 = CURVE_STYLE('',#298587,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298588 = STYLED_ITEM('color',(#298589),#24175); +#298589 = PRESENTATION_STYLE_ASSIGNMENT((#298590,#298595)); +#298590 = SURFACE_STYLE_USAGE(.BOTH.,#298591); +#298591 = SURFACE_SIDE_STYLE('',(#298592)); +#298592 = SURFACE_STYLE_FILL_AREA(#298593); +#298593 = FILL_AREA_STYLE('',(#298594)); +#298594 = FILL_AREA_STYLE_COLOUR('',#279624); +#298595 = CURVE_STYLE('',#298596,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298597 = STYLED_ITEM('color',(#298598),#24199); +#298598 = PRESENTATION_STYLE_ASSIGNMENT((#298599,#298604)); +#298599 = SURFACE_STYLE_USAGE(.BOTH.,#298600); +#298600 = SURFACE_SIDE_STYLE('',(#298601)); +#298601 = SURFACE_STYLE_FILL_AREA(#298602); +#298602 = FILL_AREA_STYLE('',(#298603)); +#298603 = FILL_AREA_STYLE_COLOUR('',#279624); +#298604 = CURVE_STYLE('',#298605,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298606 = STYLED_ITEM('color',(#298607),#24223); +#298607 = PRESENTATION_STYLE_ASSIGNMENT((#298608,#298613)); +#298608 = SURFACE_STYLE_USAGE(.BOTH.,#298609); +#298609 = SURFACE_SIDE_STYLE('',(#298610)); +#298610 = SURFACE_STYLE_FILL_AREA(#298611); +#298611 = FILL_AREA_STYLE('',(#298612)); +#298612 = FILL_AREA_STYLE_COLOUR('',#279624); +#298613 = CURVE_STYLE('',#298614,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298615 = STYLED_ITEM('color',(#298616),#24240); +#298616 = PRESENTATION_STYLE_ASSIGNMENT((#298617,#298622)); +#298617 = SURFACE_STYLE_USAGE(.BOTH.,#298618); +#298618 = SURFACE_SIDE_STYLE('',(#298619)); +#298619 = SURFACE_STYLE_FILL_AREA(#298620); +#298620 = FILL_AREA_STYLE('',(#298621)); +#298621 = FILL_AREA_STYLE_COLOUR('',#279624); +#298622 = CURVE_STYLE('',#298623,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298624 = STYLED_ITEM('color',(#298625),#24271); +#298625 = PRESENTATION_STYLE_ASSIGNMENT((#298626,#298631)); +#298626 = SURFACE_STYLE_USAGE(.BOTH.,#298627); +#298627 = SURFACE_SIDE_STYLE('',(#298628)); +#298628 = SURFACE_STYLE_FILL_AREA(#298629); +#298629 = FILL_AREA_STYLE('',(#298630)); +#298630 = FILL_AREA_STYLE_COLOUR('',#279624); +#298631 = CURVE_STYLE('',#298632,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298633 = STYLED_ITEM('color',(#298634),#24295); +#298634 = PRESENTATION_STYLE_ASSIGNMENT((#298635,#298640)); +#298635 = SURFACE_STYLE_USAGE(.BOTH.,#298636); +#298636 = SURFACE_SIDE_STYLE('',(#298637)); +#298637 = SURFACE_STYLE_FILL_AREA(#298638); +#298638 = FILL_AREA_STYLE('',(#298639)); +#298639 = FILL_AREA_STYLE_COLOUR('',#279624); +#298640 = CURVE_STYLE('',#298641,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298642 = STYLED_ITEM('color',(#298643),#24319); +#298643 = PRESENTATION_STYLE_ASSIGNMENT((#298644,#298649)); +#298644 = SURFACE_STYLE_USAGE(.BOTH.,#298645); +#298645 = SURFACE_SIDE_STYLE('',(#298646)); +#298646 = SURFACE_STYLE_FILL_AREA(#298647); +#298647 = FILL_AREA_STYLE('',(#298648)); +#298648 = FILL_AREA_STYLE_COLOUR('',#279624); +#298649 = CURVE_STYLE('',#298650,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298651 = STYLED_ITEM('color',(#298652),#24336); +#298652 = PRESENTATION_STYLE_ASSIGNMENT((#298653,#298658)); +#298653 = SURFACE_STYLE_USAGE(.BOTH.,#298654); +#298654 = SURFACE_SIDE_STYLE('',(#298655)); +#298655 = SURFACE_STYLE_FILL_AREA(#298656); +#298656 = FILL_AREA_STYLE('',(#298657)); +#298657 = FILL_AREA_STYLE_COLOUR('',#279624); +#298658 = CURVE_STYLE('',#298659,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298660 = STYLED_ITEM('color',(#298661),#24367); +#298661 = PRESENTATION_STYLE_ASSIGNMENT((#298662,#298667)); +#298662 = SURFACE_STYLE_USAGE(.BOTH.,#298663); +#298663 = SURFACE_SIDE_STYLE('',(#298664)); +#298664 = SURFACE_STYLE_FILL_AREA(#298665); +#298665 = FILL_AREA_STYLE('',(#298666)); +#298666 = FILL_AREA_STYLE_COLOUR('',#279624); +#298667 = CURVE_STYLE('',#298668,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298669 = STYLED_ITEM('color',(#298670),#24391); +#298670 = PRESENTATION_STYLE_ASSIGNMENT((#298671,#298676)); +#298671 = SURFACE_STYLE_USAGE(.BOTH.,#298672); +#298672 = SURFACE_SIDE_STYLE('',(#298673)); +#298673 = SURFACE_STYLE_FILL_AREA(#298674); +#298674 = FILL_AREA_STYLE('',(#298675)); +#298675 = FILL_AREA_STYLE_COLOUR('',#279624); +#298676 = CURVE_STYLE('',#298677,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298678 = STYLED_ITEM('color',(#298679),#24415); +#298679 = PRESENTATION_STYLE_ASSIGNMENT((#298680,#298685)); +#298680 = SURFACE_STYLE_USAGE(.BOTH.,#298681); +#298681 = SURFACE_SIDE_STYLE('',(#298682)); +#298682 = SURFACE_STYLE_FILL_AREA(#298683); +#298683 = FILL_AREA_STYLE('',(#298684)); +#298684 = FILL_AREA_STYLE_COLOUR('',#279624); +#298685 = CURVE_STYLE('',#298686,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298687 = STYLED_ITEM('color',(#298688),#24432); +#298688 = PRESENTATION_STYLE_ASSIGNMENT((#298689,#298694)); +#298689 = SURFACE_STYLE_USAGE(.BOTH.,#298690); +#298690 = SURFACE_SIDE_STYLE('',(#298691)); +#298691 = SURFACE_STYLE_FILL_AREA(#298692); +#298692 = FILL_AREA_STYLE('',(#298693)); +#298693 = FILL_AREA_STYLE_COLOUR('',#279624); +#298694 = CURVE_STYLE('',#298695,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298696 = STYLED_ITEM('color',(#298697),#24463); +#298697 = PRESENTATION_STYLE_ASSIGNMENT((#298698,#298703)); +#298698 = SURFACE_STYLE_USAGE(.BOTH.,#298699); +#298699 = SURFACE_SIDE_STYLE('',(#298700)); +#298700 = SURFACE_STYLE_FILL_AREA(#298701); +#298701 = FILL_AREA_STYLE('',(#298702)); +#298702 = FILL_AREA_STYLE_COLOUR('',#279624); +#298703 = CURVE_STYLE('',#298704,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298705 = STYLED_ITEM('color',(#298706),#24487); +#298706 = PRESENTATION_STYLE_ASSIGNMENT((#298707,#298712)); +#298707 = SURFACE_STYLE_USAGE(.BOTH.,#298708); +#298708 = SURFACE_SIDE_STYLE('',(#298709)); +#298709 = SURFACE_STYLE_FILL_AREA(#298710); +#298710 = FILL_AREA_STYLE('',(#298711)); +#298711 = FILL_AREA_STYLE_COLOUR('',#279624); +#298712 = CURVE_STYLE('',#298713,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298714 = STYLED_ITEM('color',(#298715),#24511); +#298715 = PRESENTATION_STYLE_ASSIGNMENT((#298716,#298721)); +#298716 = SURFACE_STYLE_USAGE(.BOTH.,#298717); +#298717 = SURFACE_SIDE_STYLE('',(#298718)); +#298718 = SURFACE_STYLE_FILL_AREA(#298719); +#298719 = FILL_AREA_STYLE('',(#298720)); +#298720 = FILL_AREA_STYLE_COLOUR('',#279624); +#298721 = CURVE_STYLE('',#298722,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#298722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298723 = STYLED_ITEM('color',(#298724),#24528); +#298724 = PRESENTATION_STYLE_ASSIGNMENT((#298725,#298730)); +#298725 = SURFACE_STYLE_USAGE(.BOTH.,#298726); +#298726 = SURFACE_SIDE_STYLE('',(#298727)); +#298727 = SURFACE_STYLE_FILL_AREA(#298728); +#298728 = FILL_AREA_STYLE('',(#298729)); +#298729 = FILL_AREA_STYLE_COLOUR('',#280691); +#298730 = CURVE_STYLE('',#298731,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298732 = STYLED_ITEM('color',(#298733),#24545); +#298733 = PRESENTATION_STYLE_ASSIGNMENT((#298734,#298739)); +#298734 = SURFACE_STYLE_USAGE(.BOTH.,#298735); +#298735 = SURFACE_SIDE_STYLE('',(#298736)); +#298736 = SURFACE_STYLE_FILL_AREA(#298737); +#298737 = FILL_AREA_STYLE('',(#298738)); +#298738 = FILL_AREA_STYLE_COLOUR('',#280691); +#298739 = CURVE_STYLE('',#298740,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298741 = STYLED_ITEM('color',(#298742),#24592); +#298742 = PRESENTATION_STYLE_ASSIGNMENT((#298743,#298748)); +#298743 = SURFACE_STYLE_USAGE(.BOTH.,#298744); +#298744 = SURFACE_SIDE_STYLE('',(#298745)); +#298745 = SURFACE_STYLE_FILL_AREA(#298746); +#298746 = FILL_AREA_STYLE('',(#298747)); +#298747 = FILL_AREA_STYLE_COLOUR('',#280691); +#298748 = CURVE_STYLE('',#298749,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298750 = STYLED_ITEM('color',(#298751),#24609); +#298751 = PRESENTATION_STYLE_ASSIGNMENT((#298752,#298757)); +#298752 = SURFACE_STYLE_USAGE(.BOTH.,#298753); +#298753 = SURFACE_SIDE_STYLE('',(#298754)); +#298754 = SURFACE_STYLE_FILL_AREA(#298755); +#298755 = FILL_AREA_STYLE('',(#298756)); +#298756 = FILL_AREA_STYLE_COLOUR('',#280691); +#298757 = CURVE_STYLE('',#298758,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298759 = STYLED_ITEM('color',(#298760),#24656); +#298760 = PRESENTATION_STYLE_ASSIGNMENT((#298761,#298766)); +#298761 = SURFACE_STYLE_USAGE(.BOTH.,#298762); +#298762 = SURFACE_SIDE_STYLE('',(#298763)); +#298763 = SURFACE_STYLE_FILL_AREA(#298764); +#298764 = FILL_AREA_STYLE('',(#298765)); +#298765 = FILL_AREA_STYLE_COLOUR('',#280691); +#298766 = CURVE_STYLE('',#298767,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298768 = STYLED_ITEM('color',(#298769),#24673); +#298769 = PRESENTATION_STYLE_ASSIGNMENT((#298770,#298775)); +#298770 = SURFACE_STYLE_USAGE(.BOTH.,#298771); +#298771 = SURFACE_SIDE_STYLE('',(#298772)); +#298772 = SURFACE_STYLE_FILL_AREA(#298773); +#298773 = FILL_AREA_STYLE('',(#298774)); +#298774 = FILL_AREA_STYLE_COLOUR('',#280691); +#298775 = CURVE_STYLE('',#298776,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298777 = STYLED_ITEM('color',(#298778),#24720); +#298778 = PRESENTATION_STYLE_ASSIGNMENT((#298779,#298784)); +#298779 = SURFACE_STYLE_USAGE(.BOTH.,#298780); +#298780 = SURFACE_SIDE_STYLE('',(#298781)); +#298781 = SURFACE_STYLE_FILL_AREA(#298782); +#298782 = FILL_AREA_STYLE('',(#298783)); +#298783 = FILL_AREA_STYLE_COLOUR('',#280691); +#298784 = CURVE_STYLE('',#298785,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298786 = STYLED_ITEM('color',(#298787),#24737); +#298787 = PRESENTATION_STYLE_ASSIGNMENT((#298788,#298793)); +#298788 = SURFACE_STYLE_USAGE(.BOTH.,#298789); +#298789 = SURFACE_SIDE_STYLE('',(#298790)); +#298790 = SURFACE_STYLE_FILL_AREA(#298791); +#298791 = FILL_AREA_STYLE('',(#298792)); +#298792 = FILL_AREA_STYLE_COLOUR('',#280691); +#298793 = CURVE_STYLE('',#298794,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298795 = STYLED_ITEM('color',(#298796),#24784); +#298796 = PRESENTATION_STYLE_ASSIGNMENT((#298797,#298802)); +#298797 = SURFACE_STYLE_USAGE(.BOTH.,#298798); +#298798 = SURFACE_SIDE_STYLE('',(#298799)); +#298799 = SURFACE_STYLE_FILL_AREA(#298800); +#298800 = FILL_AREA_STYLE('',(#298801)); +#298801 = FILL_AREA_STYLE_COLOUR('',#280691); +#298802 = CURVE_STYLE('',#298803,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298804 = STYLED_ITEM('color',(#298805),#24801); +#298805 = PRESENTATION_STYLE_ASSIGNMENT((#298806,#298811)); +#298806 = SURFACE_STYLE_USAGE(.BOTH.,#298807); +#298807 = SURFACE_SIDE_STYLE('',(#298808)); +#298808 = SURFACE_STYLE_FILL_AREA(#298809); +#298809 = FILL_AREA_STYLE('',(#298810)); +#298810 = FILL_AREA_STYLE_COLOUR('',#280691); +#298811 = CURVE_STYLE('',#298812,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298813 = STYLED_ITEM('color',(#298814),#24848); +#298814 = PRESENTATION_STYLE_ASSIGNMENT((#298815,#298820)); +#298815 = SURFACE_STYLE_USAGE(.BOTH.,#298816); +#298816 = SURFACE_SIDE_STYLE('',(#298817)); +#298817 = SURFACE_STYLE_FILL_AREA(#298818); +#298818 = FILL_AREA_STYLE('',(#298819)); +#298819 = FILL_AREA_STYLE_COLOUR('',#280691); +#298820 = CURVE_STYLE('',#298821,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298822 = STYLED_ITEM('color',(#298823),#24865); +#298823 = PRESENTATION_STYLE_ASSIGNMENT((#298824,#298829)); +#298824 = SURFACE_STYLE_USAGE(.BOTH.,#298825); +#298825 = SURFACE_SIDE_STYLE('',(#298826)); +#298826 = SURFACE_STYLE_FILL_AREA(#298827); +#298827 = FILL_AREA_STYLE('',(#298828)); +#298828 = FILL_AREA_STYLE_COLOUR('',#280691); +#298829 = CURVE_STYLE('',#298830,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298831 = STYLED_ITEM('color',(#298832),#24912); +#298832 = PRESENTATION_STYLE_ASSIGNMENT((#298833,#298838)); +#298833 = SURFACE_STYLE_USAGE(.BOTH.,#298834); +#298834 = SURFACE_SIDE_STYLE('',(#298835)); +#298835 = SURFACE_STYLE_FILL_AREA(#298836); +#298836 = FILL_AREA_STYLE('',(#298837)); +#298837 = FILL_AREA_STYLE_COLOUR('',#280691); +#298838 = CURVE_STYLE('',#298839,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298840 = STYLED_ITEM('color',(#298841),#24929); +#298841 = PRESENTATION_STYLE_ASSIGNMENT((#298842,#298847)); +#298842 = SURFACE_STYLE_USAGE(.BOTH.,#298843); +#298843 = SURFACE_SIDE_STYLE('',(#298844)); +#298844 = SURFACE_STYLE_FILL_AREA(#298845); +#298845 = FILL_AREA_STYLE('',(#298846)); +#298846 = FILL_AREA_STYLE_COLOUR('',#280691); +#298847 = CURVE_STYLE('',#298848,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298849 = STYLED_ITEM('color',(#298850),#24976); +#298850 = PRESENTATION_STYLE_ASSIGNMENT((#298851,#298856)); +#298851 = SURFACE_STYLE_USAGE(.BOTH.,#298852); +#298852 = SURFACE_SIDE_STYLE('',(#298853)); +#298853 = SURFACE_STYLE_FILL_AREA(#298854); +#298854 = FILL_AREA_STYLE('',(#298855)); +#298855 = FILL_AREA_STYLE_COLOUR('',#280691); +#298856 = CURVE_STYLE('',#298857,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298858 = STYLED_ITEM('color',(#298859),#24993); +#298859 = PRESENTATION_STYLE_ASSIGNMENT((#298860,#298865)); +#298860 = SURFACE_STYLE_USAGE(.BOTH.,#298861); +#298861 = SURFACE_SIDE_STYLE('',(#298862)); +#298862 = SURFACE_STYLE_FILL_AREA(#298863); +#298863 = FILL_AREA_STYLE('',(#298864)); +#298864 = FILL_AREA_STYLE_COLOUR('',#280691); +#298865 = CURVE_STYLE('',#298866,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298867 = STYLED_ITEM('color',(#298868),#25040); +#298868 = PRESENTATION_STYLE_ASSIGNMENT((#298869,#298874)); +#298869 = SURFACE_STYLE_USAGE(.BOTH.,#298870); +#298870 = SURFACE_SIDE_STYLE('',(#298871)); +#298871 = SURFACE_STYLE_FILL_AREA(#298872); +#298872 = FILL_AREA_STYLE('',(#298873)); +#298873 = FILL_AREA_STYLE_COLOUR('',#280691); +#298874 = CURVE_STYLE('',#298875,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298876 = STYLED_ITEM('color',(#298877),#25057); +#298877 = PRESENTATION_STYLE_ASSIGNMENT((#298878,#298883)); +#298878 = SURFACE_STYLE_USAGE(.BOTH.,#298879); +#298879 = SURFACE_SIDE_STYLE('',(#298880)); +#298880 = SURFACE_STYLE_FILL_AREA(#298881); +#298881 = FILL_AREA_STYLE('',(#298882)); +#298882 = FILL_AREA_STYLE_COLOUR('',#280691); +#298883 = CURVE_STYLE('',#298884,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298885 = STYLED_ITEM('color',(#298886),#25104); +#298886 = PRESENTATION_STYLE_ASSIGNMENT((#298887,#298892)); +#298887 = SURFACE_STYLE_USAGE(.BOTH.,#298888); +#298888 = SURFACE_SIDE_STYLE('',(#298889)); +#298889 = SURFACE_STYLE_FILL_AREA(#298890); +#298890 = FILL_AREA_STYLE('',(#298891)); +#298891 = FILL_AREA_STYLE_COLOUR('',#280691); +#298892 = CURVE_STYLE('',#298893,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298894 = STYLED_ITEM('color',(#298895),#25121); +#298895 = PRESENTATION_STYLE_ASSIGNMENT((#298896,#298901)); +#298896 = SURFACE_STYLE_USAGE(.BOTH.,#298897); +#298897 = SURFACE_SIDE_STYLE('',(#298898)); +#298898 = SURFACE_STYLE_FILL_AREA(#298899); +#298899 = FILL_AREA_STYLE('',(#298900)); +#298900 = FILL_AREA_STYLE_COLOUR('',#280691); +#298901 = CURVE_STYLE('',#298902,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298903 = STYLED_ITEM('color',(#298904),#25168); +#298904 = PRESENTATION_STYLE_ASSIGNMENT((#298905,#298910)); +#298905 = SURFACE_STYLE_USAGE(.BOTH.,#298906); +#298906 = SURFACE_SIDE_STYLE('',(#298907)); +#298907 = SURFACE_STYLE_FILL_AREA(#298908); +#298908 = FILL_AREA_STYLE('',(#298909)); +#298909 = FILL_AREA_STYLE_COLOUR('',#280691); +#298910 = CURVE_STYLE('',#298911,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298912 = STYLED_ITEM('color',(#298913),#25185); +#298913 = PRESENTATION_STYLE_ASSIGNMENT((#298914,#298919)); +#298914 = SURFACE_STYLE_USAGE(.BOTH.,#298915); +#298915 = SURFACE_SIDE_STYLE('',(#298916)); +#298916 = SURFACE_STYLE_FILL_AREA(#298917); +#298917 = FILL_AREA_STYLE('',(#298918)); +#298918 = FILL_AREA_STYLE_COLOUR('',#280691); +#298919 = CURVE_STYLE('',#298920,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298921 = STYLED_ITEM('color',(#298922),#25232); +#298922 = PRESENTATION_STYLE_ASSIGNMENT((#298923,#298928)); +#298923 = SURFACE_STYLE_USAGE(.BOTH.,#298924); +#298924 = SURFACE_SIDE_STYLE('',(#298925)); +#298925 = SURFACE_STYLE_FILL_AREA(#298926); +#298926 = FILL_AREA_STYLE('',(#298927)); +#298927 = FILL_AREA_STYLE_COLOUR('',#280691); +#298928 = CURVE_STYLE('',#298929,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298930 = STYLED_ITEM('color',(#298931),#25249); +#298931 = PRESENTATION_STYLE_ASSIGNMENT((#298932,#298937)); +#298932 = SURFACE_STYLE_USAGE(.BOTH.,#298933); +#298933 = SURFACE_SIDE_STYLE('',(#298934)); +#298934 = SURFACE_STYLE_FILL_AREA(#298935); +#298935 = FILL_AREA_STYLE('',(#298936)); +#298936 = FILL_AREA_STYLE_COLOUR('',#280691); +#298937 = CURVE_STYLE('',#298938,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298939 = STYLED_ITEM('color',(#298940),#25296); +#298940 = PRESENTATION_STYLE_ASSIGNMENT((#298941,#298946)); +#298941 = SURFACE_STYLE_USAGE(.BOTH.,#298942); +#298942 = SURFACE_SIDE_STYLE('',(#298943)); +#298943 = SURFACE_STYLE_FILL_AREA(#298944); +#298944 = FILL_AREA_STYLE('',(#298945)); +#298945 = FILL_AREA_STYLE_COLOUR('',#280691); +#298946 = CURVE_STYLE('',#298947,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298948 = STYLED_ITEM('color',(#298949),#25313); +#298949 = PRESENTATION_STYLE_ASSIGNMENT((#298950,#298955)); +#298950 = SURFACE_STYLE_USAGE(.BOTH.,#298951); +#298951 = SURFACE_SIDE_STYLE('',(#298952)); +#298952 = SURFACE_STYLE_FILL_AREA(#298953); +#298953 = FILL_AREA_STYLE('',(#298954)); +#298954 = FILL_AREA_STYLE_COLOUR('',#280691); +#298955 = CURVE_STYLE('',#298956,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298957 = STYLED_ITEM('color',(#298958),#25360); +#298958 = PRESENTATION_STYLE_ASSIGNMENT((#298959,#298964)); +#298959 = SURFACE_STYLE_USAGE(.BOTH.,#298960); +#298960 = SURFACE_SIDE_STYLE('',(#298961)); +#298961 = SURFACE_STYLE_FILL_AREA(#298962); +#298962 = FILL_AREA_STYLE('',(#298963)); +#298963 = FILL_AREA_STYLE_COLOUR('',#280691); +#298964 = CURVE_STYLE('',#298965,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298966 = STYLED_ITEM('color',(#298967),#25377); +#298967 = PRESENTATION_STYLE_ASSIGNMENT((#298968,#298973)); +#298968 = SURFACE_STYLE_USAGE(.BOTH.,#298969); +#298969 = SURFACE_SIDE_STYLE('',(#298970)); +#298970 = SURFACE_STYLE_FILL_AREA(#298971); +#298971 = FILL_AREA_STYLE('',(#298972)); +#298972 = FILL_AREA_STYLE_COLOUR('',#280691); +#298973 = CURVE_STYLE('',#298974,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298975 = STYLED_ITEM('color',(#298976),#25424); +#298976 = PRESENTATION_STYLE_ASSIGNMENT((#298977,#298982)); +#298977 = SURFACE_STYLE_USAGE(.BOTH.,#298978); +#298978 = SURFACE_SIDE_STYLE('',(#298979)); +#298979 = SURFACE_STYLE_FILL_AREA(#298980); +#298980 = FILL_AREA_STYLE('',(#298981)); +#298981 = FILL_AREA_STYLE_COLOUR('',#280691); +#298982 = CURVE_STYLE('',#298983,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298984 = STYLED_ITEM('color',(#298985),#25441); +#298985 = PRESENTATION_STYLE_ASSIGNMENT((#298986,#298991)); +#298986 = SURFACE_STYLE_USAGE(.BOTH.,#298987); +#298987 = SURFACE_SIDE_STYLE('',(#298988)); +#298988 = SURFACE_STYLE_FILL_AREA(#298989); +#298989 = FILL_AREA_STYLE('',(#298990)); +#298990 = FILL_AREA_STYLE_COLOUR('',#280691); +#298991 = CURVE_STYLE('',#298992,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#298992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298993 = STYLED_ITEM('color',(#298994),#25488); +#298994 = PRESENTATION_STYLE_ASSIGNMENT((#298995,#299000)); +#298995 = SURFACE_STYLE_USAGE(.BOTH.,#298996); +#298996 = SURFACE_SIDE_STYLE('',(#298997)); +#298997 = SURFACE_STYLE_FILL_AREA(#298998); +#298998 = FILL_AREA_STYLE('',(#298999)); +#298999 = FILL_AREA_STYLE_COLOUR('',#280691); +#299000 = CURVE_STYLE('',#299001,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299002 = STYLED_ITEM('color',(#299003),#25505); +#299003 = PRESENTATION_STYLE_ASSIGNMENT((#299004,#299009)); +#299004 = SURFACE_STYLE_USAGE(.BOTH.,#299005); +#299005 = SURFACE_SIDE_STYLE('',(#299006)); +#299006 = SURFACE_STYLE_FILL_AREA(#299007); +#299007 = FILL_AREA_STYLE('',(#299008)); +#299008 = FILL_AREA_STYLE_COLOUR('',#280691); +#299009 = CURVE_STYLE('',#299010,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299011 = STYLED_ITEM('color',(#299012),#25552); +#299012 = PRESENTATION_STYLE_ASSIGNMENT((#299013,#299018)); +#299013 = SURFACE_STYLE_USAGE(.BOTH.,#299014); +#299014 = SURFACE_SIDE_STYLE('',(#299015)); +#299015 = SURFACE_STYLE_FILL_AREA(#299016); +#299016 = FILL_AREA_STYLE('',(#299017)); +#299017 = FILL_AREA_STYLE_COLOUR('',#280691); +#299018 = CURVE_STYLE('',#299019,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299020 = STYLED_ITEM('color',(#299021),#25569); +#299021 = PRESENTATION_STYLE_ASSIGNMENT((#299022,#299027)); +#299022 = SURFACE_STYLE_USAGE(.BOTH.,#299023); +#299023 = SURFACE_SIDE_STYLE('',(#299024)); +#299024 = SURFACE_STYLE_FILL_AREA(#299025); +#299025 = FILL_AREA_STYLE('',(#299026)); +#299026 = FILL_AREA_STYLE_COLOUR('',#280691); +#299027 = CURVE_STYLE('',#299028,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299029 = STYLED_ITEM('color',(#299030),#25616); +#299030 = PRESENTATION_STYLE_ASSIGNMENT((#299031,#299036)); +#299031 = SURFACE_STYLE_USAGE(.BOTH.,#299032); +#299032 = SURFACE_SIDE_STYLE('',(#299033)); +#299033 = SURFACE_STYLE_FILL_AREA(#299034); +#299034 = FILL_AREA_STYLE('',(#299035)); +#299035 = FILL_AREA_STYLE_COLOUR('',#280691); +#299036 = CURVE_STYLE('',#299037,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299038 = STYLED_ITEM('color',(#299039),#25633); +#299039 = PRESENTATION_STYLE_ASSIGNMENT((#299040,#299045)); +#299040 = SURFACE_STYLE_USAGE(.BOTH.,#299041); +#299041 = SURFACE_SIDE_STYLE('',(#299042)); +#299042 = SURFACE_STYLE_FILL_AREA(#299043); +#299043 = FILL_AREA_STYLE('',(#299044)); +#299044 = FILL_AREA_STYLE_COLOUR('',#280691); +#299045 = CURVE_STYLE('',#299046,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299047 = STYLED_ITEM('color',(#299048),#25680); +#299048 = PRESENTATION_STYLE_ASSIGNMENT((#299049,#299054)); +#299049 = SURFACE_STYLE_USAGE(.BOTH.,#299050); +#299050 = SURFACE_SIDE_STYLE('',(#299051)); +#299051 = SURFACE_STYLE_FILL_AREA(#299052); +#299052 = FILL_AREA_STYLE('',(#299053)); +#299053 = FILL_AREA_STYLE_COLOUR('',#280691); +#299054 = CURVE_STYLE('',#299055,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299056 = STYLED_ITEM('color',(#299057),#25697); +#299057 = PRESENTATION_STYLE_ASSIGNMENT((#299058,#299063)); +#299058 = SURFACE_STYLE_USAGE(.BOTH.,#299059); +#299059 = SURFACE_SIDE_STYLE('',(#299060)); +#299060 = SURFACE_STYLE_FILL_AREA(#299061); +#299061 = FILL_AREA_STYLE('',(#299062)); +#299062 = FILL_AREA_STYLE_COLOUR('',#280691); +#299063 = CURVE_STYLE('',#299064,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299065 = STYLED_ITEM('color',(#299066),#25744); +#299066 = PRESENTATION_STYLE_ASSIGNMENT((#299067,#299072)); +#299067 = SURFACE_STYLE_USAGE(.BOTH.,#299068); +#299068 = SURFACE_SIDE_STYLE('',(#299069)); +#299069 = SURFACE_STYLE_FILL_AREA(#299070); +#299070 = FILL_AREA_STYLE('',(#299071)); +#299071 = FILL_AREA_STYLE_COLOUR('',#280691); +#299072 = CURVE_STYLE('',#299073,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299074 = STYLED_ITEM('color',(#299075),#25761); +#299075 = PRESENTATION_STYLE_ASSIGNMENT((#299076,#299081)); +#299076 = SURFACE_STYLE_USAGE(.BOTH.,#299077); +#299077 = SURFACE_SIDE_STYLE('',(#299078)); +#299078 = SURFACE_STYLE_FILL_AREA(#299079); +#299079 = FILL_AREA_STYLE('',(#299080)); +#299080 = FILL_AREA_STYLE_COLOUR('',#280691); +#299081 = CURVE_STYLE('',#299082,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299083 = STYLED_ITEM('color',(#299084),#25808); +#299084 = PRESENTATION_STYLE_ASSIGNMENT((#299085,#299090)); +#299085 = SURFACE_STYLE_USAGE(.BOTH.,#299086); +#299086 = SURFACE_SIDE_STYLE('',(#299087)); +#299087 = SURFACE_STYLE_FILL_AREA(#299088); +#299088 = FILL_AREA_STYLE('',(#299089)); +#299089 = FILL_AREA_STYLE_COLOUR('',#280691); +#299090 = CURVE_STYLE('',#299091,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299092 = STYLED_ITEM('color',(#299093),#25825); +#299093 = PRESENTATION_STYLE_ASSIGNMENT((#299094,#299099)); +#299094 = SURFACE_STYLE_USAGE(.BOTH.,#299095); +#299095 = SURFACE_SIDE_STYLE('',(#299096)); +#299096 = SURFACE_STYLE_FILL_AREA(#299097); +#299097 = FILL_AREA_STYLE('',(#299098)); +#299098 = FILL_AREA_STYLE_COLOUR('',#280691); +#299099 = CURVE_STYLE('',#299100,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299101 = STYLED_ITEM('color',(#299102),#25872); +#299102 = PRESENTATION_STYLE_ASSIGNMENT((#299103,#299108)); +#299103 = SURFACE_STYLE_USAGE(.BOTH.,#299104); +#299104 = SURFACE_SIDE_STYLE('',(#299105)); +#299105 = SURFACE_STYLE_FILL_AREA(#299106); +#299106 = FILL_AREA_STYLE('',(#299107)); +#299107 = FILL_AREA_STYLE_COLOUR('',#280691); +#299108 = CURVE_STYLE('',#299109,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299110 = STYLED_ITEM('color',(#299111),#25889); +#299111 = PRESENTATION_STYLE_ASSIGNMENT((#299112,#299117)); +#299112 = SURFACE_STYLE_USAGE(.BOTH.,#299113); +#299113 = SURFACE_SIDE_STYLE('',(#299114)); +#299114 = SURFACE_STYLE_FILL_AREA(#299115); +#299115 = FILL_AREA_STYLE('',(#299116)); +#299116 = FILL_AREA_STYLE_COLOUR('',#280691); +#299117 = CURVE_STYLE('',#299118,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299119 = STYLED_ITEM('color',(#299120),#25936); +#299120 = PRESENTATION_STYLE_ASSIGNMENT((#299121,#299126)); +#299121 = SURFACE_STYLE_USAGE(.BOTH.,#299122); +#299122 = SURFACE_SIDE_STYLE('',(#299123)); +#299123 = SURFACE_STYLE_FILL_AREA(#299124); +#299124 = FILL_AREA_STYLE('',(#299125)); +#299125 = FILL_AREA_STYLE_COLOUR('',#280691); +#299126 = CURVE_STYLE('',#299127,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299128 = STYLED_ITEM('color',(#299129),#25953); +#299129 = PRESENTATION_STYLE_ASSIGNMENT((#299130,#299135)); +#299130 = SURFACE_STYLE_USAGE(.BOTH.,#299131); +#299131 = SURFACE_SIDE_STYLE('',(#299132)); +#299132 = SURFACE_STYLE_FILL_AREA(#299133); +#299133 = FILL_AREA_STYLE('',(#299134)); +#299134 = FILL_AREA_STYLE_COLOUR('',#280691); +#299135 = CURVE_STYLE('',#299136,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299137 = STYLED_ITEM('color',(#299138),#26000); +#299138 = PRESENTATION_STYLE_ASSIGNMENT((#299139,#299144)); +#299139 = SURFACE_STYLE_USAGE(.BOTH.,#299140); +#299140 = SURFACE_SIDE_STYLE('',(#299141)); +#299141 = SURFACE_STYLE_FILL_AREA(#299142); +#299142 = FILL_AREA_STYLE('',(#299143)); +#299143 = FILL_AREA_STYLE_COLOUR('',#280691); +#299144 = CURVE_STYLE('',#299145,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299146 = STYLED_ITEM('color',(#299147),#26017); +#299147 = PRESENTATION_STYLE_ASSIGNMENT((#299148,#299153)); +#299148 = SURFACE_STYLE_USAGE(.BOTH.,#299149); +#299149 = SURFACE_SIDE_STYLE('',(#299150)); +#299150 = SURFACE_STYLE_FILL_AREA(#299151); +#299151 = FILL_AREA_STYLE('',(#299152)); +#299152 = FILL_AREA_STYLE_COLOUR('',#280691); +#299153 = CURVE_STYLE('',#299154,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299155 = STYLED_ITEM('color',(#299156),#26064); +#299156 = PRESENTATION_STYLE_ASSIGNMENT((#299157,#299162)); +#299157 = SURFACE_STYLE_USAGE(.BOTH.,#299158); +#299158 = SURFACE_SIDE_STYLE('',(#299159)); +#299159 = SURFACE_STYLE_FILL_AREA(#299160); +#299160 = FILL_AREA_STYLE('',(#299161)); +#299161 = FILL_AREA_STYLE_COLOUR('',#280691); +#299162 = CURVE_STYLE('',#299163,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299164 = STYLED_ITEM('color',(#299165),#26081); +#299165 = PRESENTATION_STYLE_ASSIGNMENT((#299166,#299171)); +#299166 = SURFACE_STYLE_USAGE(.BOTH.,#299167); +#299167 = SURFACE_SIDE_STYLE('',(#299168)); +#299168 = SURFACE_STYLE_FILL_AREA(#299169); +#299169 = FILL_AREA_STYLE('',(#299170)); +#299170 = FILL_AREA_STYLE_COLOUR('',#280691); +#299171 = CURVE_STYLE('',#299172,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299173 = STYLED_ITEM('color',(#299174),#26128); +#299174 = PRESENTATION_STYLE_ASSIGNMENT((#299175,#299180)); +#299175 = SURFACE_STYLE_USAGE(.BOTH.,#299176); +#299176 = SURFACE_SIDE_STYLE('',(#299177)); +#299177 = SURFACE_STYLE_FILL_AREA(#299178); +#299178 = FILL_AREA_STYLE('',(#299179)); +#299179 = FILL_AREA_STYLE_COLOUR('',#280691); +#299180 = CURVE_STYLE('',#299181,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299182 = STYLED_ITEM('color',(#299183),#26145); +#299183 = PRESENTATION_STYLE_ASSIGNMENT((#299184,#299189)); +#299184 = SURFACE_STYLE_USAGE(.BOTH.,#299185); +#299185 = SURFACE_SIDE_STYLE('',(#299186)); +#299186 = SURFACE_STYLE_FILL_AREA(#299187); +#299187 = FILL_AREA_STYLE('',(#299188)); +#299188 = FILL_AREA_STYLE_COLOUR('',#280691); +#299189 = CURVE_STYLE('',#299190,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299191 = STYLED_ITEM('color',(#299192),#26192); +#299192 = PRESENTATION_STYLE_ASSIGNMENT((#299193,#299198)); +#299193 = SURFACE_STYLE_USAGE(.BOTH.,#299194); +#299194 = SURFACE_SIDE_STYLE('',(#299195)); +#299195 = SURFACE_STYLE_FILL_AREA(#299196); +#299196 = FILL_AREA_STYLE('',(#299197)); +#299197 = FILL_AREA_STYLE_COLOUR('',#280691); +#299198 = CURVE_STYLE('',#299199,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299200 = STYLED_ITEM('color',(#299201),#26209); +#299201 = PRESENTATION_STYLE_ASSIGNMENT((#299202,#299207)); +#299202 = SURFACE_STYLE_USAGE(.BOTH.,#299203); +#299203 = SURFACE_SIDE_STYLE('',(#299204)); +#299204 = SURFACE_STYLE_FILL_AREA(#299205); +#299205 = FILL_AREA_STYLE('',(#299206)); +#299206 = FILL_AREA_STYLE_COLOUR('',#280691); +#299207 = CURVE_STYLE('',#299208,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299209 = STYLED_ITEM('color',(#299210),#26256); +#299210 = PRESENTATION_STYLE_ASSIGNMENT((#299211,#299216)); +#299211 = SURFACE_STYLE_USAGE(.BOTH.,#299212); +#299212 = SURFACE_SIDE_STYLE('',(#299213)); +#299213 = SURFACE_STYLE_FILL_AREA(#299214); +#299214 = FILL_AREA_STYLE('',(#299215)); +#299215 = FILL_AREA_STYLE_COLOUR('',#280691); +#299216 = CURVE_STYLE('',#299217,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299218 = STYLED_ITEM('color',(#299219),#26273); +#299219 = PRESENTATION_STYLE_ASSIGNMENT((#299220,#299225)); +#299220 = SURFACE_STYLE_USAGE(.BOTH.,#299221); +#299221 = SURFACE_SIDE_STYLE('',(#299222)); +#299222 = SURFACE_STYLE_FILL_AREA(#299223); +#299223 = FILL_AREA_STYLE('',(#299224)); +#299224 = FILL_AREA_STYLE_COLOUR('',#280691); +#299225 = CURVE_STYLE('',#299226,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299227 = STYLED_ITEM('color',(#299228),#26320); +#299228 = PRESENTATION_STYLE_ASSIGNMENT((#299229,#299234)); +#299229 = SURFACE_STYLE_USAGE(.BOTH.,#299230); +#299230 = SURFACE_SIDE_STYLE('',(#299231)); +#299231 = SURFACE_STYLE_FILL_AREA(#299232); +#299232 = FILL_AREA_STYLE('',(#299233)); +#299233 = FILL_AREA_STYLE_COLOUR('',#280691); +#299234 = CURVE_STYLE('',#299235,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299236 = STYLED_ITEM('color',(#299237),#26337); +#299237 = PRESENTATION_STYLE_ASSIGNMENT((#299238,#299243)); +#299238 = SURFACE_STYLE_USAGE(.BOTH.,#299239); +#299239 = SURFACE_SIDE_STYLE('',(#299240)); +#299240 = SURFACE_STYLE_FILL_AREA(#299241); +#299241 = FILL_AREA_STYLE('',(#299242)); +#299242 = FILL_AREA_STYLE_COLOUR('',#280691); +#299243 = CURVE_STYLE('',#299244,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299245 = STYLED_ITEM('color',(#299246),#26384); +#299246 = PRESENTATION_STYLE_ASSIGNMENT((#299247,#299252)); +#299247 = SURFACE_STYLE_USAGE(.BOTH.,#299248); +#299248 = SURFACE_SIDE_STYLE('',(#299249)); +#299249 = SURFACE_STYLE_FILL_AREA(#299250); +#299250 = FILL_AREA_STYLE('',(#299251)); +#299251 = FILL_AREA_STYLE_COLOUR('',#280691); +#299252 = CURVE_STYLE('',#299253,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299254 = STYLED_ITEM('color',(#299255),#26401); +#299255 = PRESENTATION_STYLE_ASSIGNMENT((#299256,#299261)); +#299256 = SURFACE_STYLE_USAGE(.BOTH.,#299257); +#299257 = SURFACE_SIDE_STYLE('',(#299258)); +#299258 = SURFACE_STYLE_FILL_AREA(#299259); +#299259 = FILL_AREA_STYLE('',(#299260)); +#299260 = FILL_AREA_STYLE_COLOUR('',#280691); +#299261 = CURVE_STYLE('',#299262,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299263 = STYLED_ITEM('color',(#299264),#26448); +#299264 = PRESENTATION_STYLE_ASSIGNMENT((#299265,#299270)); +#299265 = SURFACE_STYLE_USAGE(.BOTH.,#299266); +#299266 = SURFACE_SIDE_STYLE('',(#299267)); +#299267 = SURFACE_STYLE_FILL_AREA(#299268); +#299268 = FILL_AREA_STYLE('',(#299269)); +#299269 = FILL_AREA_STYLE_COLOUR('',#280691); +#299270 = CURVE_STYLE('',#299271,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299272 = STYLED_ITEM('color',(#299273),#26465); +#299273 = PRESENTATION_STYLE_ASSIGNMENT((#299274,#299279)); +#299274 = SURFACE_STYLE_USAGE(.BOTH.,#299275); +#299275 = SURFACE_SIDE_STYLE('',(#299276)); +#299276 = SURFACE_STYLE_FILL_AREA(#299277); +#299277 = FILL_AREA_STYLE('',(#299278)); +#299278 = FILL_AREA_STYLE_COLOUR('',#280691); +#299279 = CURVE_STYLE('',#299280,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299281 = STYLED_ITEM('color',(#299282),#26512); +#299282 = PRESENTATION_STYLE_ASSIGNMENT((#299283,#299288)); +#299283 = SURFACE_STYLE_USAGE(.BOTH.,#299284); +#299284 = SURFACE_SIDE_STYLE('',(#299285)); +#299285 = SURFACE_STYLE_FILL_AREA(#299286); +#299286 = FILL_AREA_STYLE('',(#299287)); +#299287 = FILL_AREA_STYLE_COLOUR('',#280691); +#299288 = CURVE_STYLE('',#299289,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299290 = STYLED_ITEM('color',(#299291),#26529); +#299291 = PRESENTATION_STYLE_ASSIGNMENT((#299292,#299297)); +#299292 = SURFACE_STYLE_USAGE(.BOTH.,#299293); +#299293 = SURFACE_SIDE_STYLE('',(#299294)); +#299294 = SURFACE_STYLE_FILL_AREA(#299295); +#299295 = FILL_AREA_STYLE('',(#299296)); +#299296 = FILL_AREA_STYLE_COLOUR('',#280691); +#299297 = CURVE_STYLE('',#299298,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299299 = STYLED_ITEM('color',(#299300),#26576); +#299300 = PRESENTATION_STYLE_ASSIGNMENT((#299301,#299306)); +#299301 = SURFACE_STYLE_USAGE(.BOTH.,#299302); +#299302 = SURFACE_SIDE_STYLE('',(#299303)); +#299303 = SURFACE_STYLE_FILL_AREA(#299304); +#299304 = FILL_AREA_STYLE('',(#299305)); +#299305 = FILL_AREA_STYLE_COLOUR('',#280691); +#299306 = CURVE_STYLE('',#299307,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299308 = STYLED_ITEM('color',(#299309),#26593); +#299309 = PRESENTATION_STYLE_ASSIGNMENT((#299310,#299315)); +#299310 = SURFACE_STYLE_USAGE(.BOTH.,#299311); +#299311 = SURFACE_SIDE_STYLE('',(#299312)); +#299312 = SURFACE_STYLE_FILL_AREA(#299313); +#299313 = FILL_AREA_STYLE('',(#299314)); +#299314 = FILL_AREA_STYLE_COLOUR('',#280691); +#299315 = CURVE_STYLE('',#299316,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299317 = STYLED_ITEM('color',(#299318),#26640); +#299318 = PRESENTATION_STYLE_ASSIGNMENT((#299319,#299324)); +#299319 = SURFACE_STYLE_USAGE(.BOTH.,#299320); +#299320 = SURFACE_SIDE_STYLE('',(#299321)); +#299321 = SURFACE_STYLE_FILL_AREA(#299322); +#299322 = FILL_AREA_STYLE('',(#299323)); +#299323 = FILL_AREA_STYLE_COLOUR('',#280691); +#299324 = CURVE_STYLE('',#299325,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299326 = STYLED_ITEM('color',(#299327),#26657); +#299327 = PRESENTATION_STYLE_ASSIGNMENT((#299328,#299333)); +#299328 = SURFACE_STYLE_USAGE(.BOTH.,#299329); +#299329 = SURFACE_SIDE_STYLE('',(#299330)); +#299330 = SURFACE_STYLE_FILL_AREA(#299331); +#299331 = FILL_AREA_STYLE('',(#299332)); +#299332 = FILL_AREA_STYLE_COLOUR('',#280691); +#299333 = CURVE_STYLE('',#299334,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299335 = STYLED_ITEM('color',(#299336),#26704); +#299336 = PRESENTATION_STYLE_ASSIGNMENT((#299337,#299342)); +#299337 = SURFACE_STYLE_USAGE(.BOTH.,#299338); +#299338 = SURFACE_SIDE_STYLE('',(#299339)); +#299339 = SURFACE_STYLE_FILL_AREA(#299340); +#299340 = FILL_AREA_STYLE('',(#299341)); +#299341 = FILL_AREA_STYLE_COLOUR('',#280691); +#299342 = CURVE_STYLE('',#299343,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299344 = STYLED_ITEM('color',(#299345),#26721); +#299345 = PRESENTATION_STYLE_ASSIGNMENT((#299346,#299351)); +#299346 = SURFACE_STYLE_USAGE(.BOTH.,#299347); +#299347 = SURFACE_SIDE_STYLE('',(#299348)); +#299348 = SURFACE_STYLE_FILL_AREA(#299349); +#299349 = FILL_AREA_STYLE('',(#299350)); +#299350 = FILL_AREA_STYLE_COLOUR('',#280691); +#299351 = CURVE_STYLE('',#299352,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299353 = STYLED_ITEM('color',(#299354),#26768); +#299354 = PRESENTATION_STYLE_ASSIGNMENT((#299355,#299360)); +#299355 = SURFACE_STYLE_USAGE(.BOTH.,#299356); +#299356 = SURFACE_SIDE_STYLE('',(#299357)); +#299357 = SURFACE_STYLE_FILL_AREA(#299358); +#299358 = FILL_AREA_STYLE('',(#299359)); +#299359 = FILL_AREA_STYLE_COLOUR('',#280691); +#299360 = CURVE_STYLE('',#299361,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299362 = STYLED_ITEM('color',(#299363),#26785); +#299363 = PRESENTATION_STYLE_ASSIGNMENT((#299364,#299369)); +#299364 = SURFACE_STYLE_USAGE(.BOTH.,#299365); +#299365 = SURFACE_SIDE_STYLE('',(#299366)); +#299366 = SURFACE_STYLE_FILL_AREA(#299367); +#299367 = FILL_AREA_STYLE('',(#299368)); +#299368 = FILL_AREA_STYLE_COLOUR('',#280691); +#299369 = CURVE_STYLE('',#299370,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299371 = STYLED_ITEM('color',(#299372),#26832); +#299372 = PRESENTATION_STYLE_ASSIGNMENT((#299373,#299378)); +#299373 = SURFACE_STYLE_USAGE(.BOTH.,#299374); +#299374 = SURFACE_SIDE_STYLE('',(#299375)); +#299375 = SURFACE_STYLE_FILL_AREA(#299376); +#299376 = FILL_AREA_STYLE('',(#299377)); +#299377 = FILL_AREA_STYLE_COLOUR('',#280691); +#299378 = CURVE_STYLE('',#299379,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299380 = STYLED_ITEM('color',(#299381),#26849); +#299381 = PRESENTATION_STYLE_ASSIGNMENT((#299382,#299387)); +#299382 = SURFACE_STYLE_USAGE(.BOTH.,#299383); +#299383 = SURFACE_SIDE_STYLE('',(#299384)); +#299384 = SURFACE_STYLE_FILL_AREA(#299385); +#299385 = FILL_AREA_STYLE('',(#299386)); +#299386 = FILL_AREA_STYLE_COLOUR('',#280691); +#299387 = CURVE_STYLE('',#299388,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299389 = STYLED_ITEM('color',(#299390),#26896); +#299390 = PRESENTATION_STYLE_ASSIGNMENT((#299391,#299396)); +#299391 = SURFACE_STYLE_USAGE(.BOTH.,#299392); +#299392 = SURFACE_SIDE_STYLE('',(#299393)); +#299393 = SURFACE_STYLE_FILL_AREA(#299394); +#299394 = FILL_AREA_STYLE('',(#299395)); +#299395 = FILL_AREA_STYLE_COLOUR('',#280691); +#299396 = CURVE_STYLE('',#299397,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299398 = STYLED_ITEM('color',(#299399),#26913); +#299399 = PRESENTATION_STYLE_ASSIGNMENT((#299400,#299405)); +#299400 = SURFACE_STYLE_USAGE(.BOTH.,#299401); +#299401 = SURFACE_SIDE_STYLE('',(#299402)); +#299402 = SURFACE_STYLE_FILL_AREA(#299403); +#299403 = FILL_AREA_STYLE('',(#299404)); +#299404 = FILL_AREA_STYLE_COLOUR('',#280691); +#299405 = CURVE_STYLE('',#299406,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299407 = STYLED_ITEM('color',(#299408),#26960); +#299408 = PRESENTATION_STYLE_ASSIGNMENT((#299409,#299414)); +#299409 = SURFACE_STYLE_USAGE(.BOTH.,#299410); +#299410 = SURFACE_SIDE_STYLE('',(#299411)); +#299411 = SURFACE_STYLE_FILL_AREA(#299412); +#299412 = FILL_AREA_STYLE('',(#299413)); +#299413 = FILL_AREA_STYLE_COLOUR('',#280691); +#299414 = CURVE_STYLE('',#299415,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299416 = STYLED_ITEM('color',(#299417),#26977); +#299417 = PRESENTATION_STYLE_ASSIGNMENT((#299418,#299423)); +#299418 = SURFACE_STYLE_USAGE(.BOTH.,#299419); +#299419 = SURFACE_SIDE_STYLE('',(#299420)); +#299420 = SURFACE_STYLE_FILL_AREA(#299421); +#299421 = FILL_AREA_STYLE('',(#299422)); +#299422 = FILL_AREA_STYLE_COLOUR('',#280691); +#299423 = CURVE_STYLE('',#299424,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299425 = STYLED_ITEM('color',(#299426),#27024); +#299426 = PRESENTATION_STYLE_ASSIGNMENT((#299427,#299432)); +#299427 = SURFACE_STYLE_USAGE(.BOTH.,#299428); +#299428 = SURFACE_SIDE_STYLE('',(#299429)); +#299429 = SURFACE_STYLE_FILL_AREA(#299430); +#299430 = FILL_AREA_STYLE('',(#299431)); +#299431 = FILL_AREA_STYLE_COLOUR('',#280691); +#299432 = CURVE_STYLE('',#299433,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299434 = STYLED_ITEM('color',(#299435),#27041); +#299435 = PRESENTATION_STYLE_ASSIGNMENT((#299436,#299441)); +#299436 = SURFACE_STYLE_USAGE(.BOTH.,#299437); +#299437 = SURFACE_SIDE_STYLE('',(#299438)); +#299438 = SURFACE_STYLE_FILL_AREA(#299439); +#299439 = FILL_AREA_STYLE('',(#299440)); +#299440 = FILL_AREA_STYLE_COLOUR('',#280691); +#299441 = CURVE_STYLE('',#299442,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299443 = STYLED_ITEM('color',(#299444),#27088); +#299444 = PRESENTATION_STYLE_ASSIGNMENT((#299445,#299450)); +#299445 = SURFACE_STYLE_USAGE(.BOTH.,#299446); +#299446 = SURFACE_SIDE_STYLE('',(#299447)); +#299447 = SURFACE_STYLE_FILL_AREA(#299448); +#299448 = FILL_AREA_STYLE('',(#299449)); +#299449 = FILL_AREA_STYLE_COLOUR('',#279624); +#299450 = CURVE_STYLE('',#299451,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299452 = STYLED_ITEM('color',(#299453),#27119); +#299453 = PRESENTATION_STYLE_ASSIGNMENT((#299454,#299459)); +#299454 = SURFACE_STYLE_USAGE(.BOTH.,#299455); +#299455 = SURFACE_SIDE_STYLE('',(#299456)); +#299456 = SURFACE_STYLE_FILL_AREA(#299457); +#299457 = FILL_AREA_STYLE('',(#299458)); +#299458 = FILL_AREA_STYLE_COLOUR('',#279624); +#299459 = CURVE_STYLE('',#299460,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299461 = OVER_RIDING_STYLED_ITEM('overriding color',(#299462),#27133, + #299452); +#299462 = PRESENTATION_STYLE_ASSIGNMENT((#299463,#299468)); +#299463 = SURFACE_STYLE_USAGE(.BOTH.,#299464); +#299464 = SURFACE_SIDE_STYLE('',(#299465)); +#299465 = SURFACE_STYLE_FILL_AREA(#299466); +#299466 = FILL_AREA_STYLE('',(#299467)); +#299467 = FILL_AREA_STYLE_COLOUR('',#280691); +#299468 = CURVE_STYLE('',#299469,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299470 = OVER_RIDING_STYLED_ITEM('overriding color',(#299471),#27149, + #299452); +#299471 = PRESENTATION_STYLE_ASSIGNMENT((#299472,#299477)); +#299472 = SURFACE_STYLE_USAGE(.BOTH.,#299473); +#299473 = SURFACE_SIDE_STYLE('',(#299474)); +#299474 = SURFACE_STYLE_FILL_AREA(#299475); +#299475 = FILL_AREA_STYLE('',(#299476)); +#299476 = FILL_AREA_STYLE_COLOUR('',#280691); +#299477 = CURVE_STYLE('',#299478,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299479 = STYLED_ITEM('color',(#299480),#27175); +#299480 = PRESENTATION_STYLE_ASSIGNMENT((#299481,#299486)); +#299481 = SURFACE_STYLE_USAGE(.BOTH.,#299482); +#299482 = SURFACE_SIDE_STYLE('',(#299483)); +#299483 = SURFACE_STYLE_FILL_AREA(#299484); +#299484 = FILL_AREA_STYLE('',(#299485)); +#299485 = FILL_AREA_STYLE_COLOUR('',#279624); +#299486 = CURVE_STYLE('',#299487,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299488 = STYLED_ITEM('color',(#299489),#27199); +#299489 = PRESENTATION_STYLE_ASSIGNMENT((#299490,#299495)); +#299490 = SURFACE_STYLE_USAGE(.BOTH.,#299491); +#299491 = SURFACE_SIDE_STYLE('',(#299492)); +#299492 = SURFACE_STYLE_FILL_AREA(#299493); +#299493 = FILL_AREA_STYLE('',(#299494)); +#299494 = FILL_AREA_STYLE_COLOUR('',#279624); +#299495 = CURVE_STYLE('',#299496,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299497 = OVER_RIDING_STYLED_ITEM('overriding color',(#299498),#27213, + #299488); +#299498 = PRESENTATION_STYLE_ASSIGNMENT((#299499,#299504)); +#299499 = SURFACE_STYLE_USAGE(.BOTH.,#299500); +#299500 = SURFACE_SIDE_STYLE('',(#299501)); +#299501 = SURFACE_STYLE_FILL_AREA(#299502); +#299502 = FILL_AREA_STYLE('',(#299503)); +#299503 = FILL_AREA_STYLE_COLOUR('',#280691); +#299504 = CURVE_STYLE('',#299505,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299506 = OVER_RIDING_STYLED_ITEM('overriding color',(#299507),#27229, + #299488); +#299507 = PRESENTATION_STYLE_ASSIGNMENT((#299508,#299513)); +#299508 = SURFACE_STYLE_USAGE(.BOTH.,#299509); +#299509 = SURFACE_SIDE_STYLE('',(#299510)); +#299510 = SURFACE_STYLE_FILL_AREA(#299511); +#299511 = FILL_AREA_STYLE('',(#299512)); +#299512 = FILL_AREA_STYLE_COLOUR('',#280691); +#299513 = CURVE_STYLE('',#299514,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299515 = STYLED_ITEM('color',(#299516),#27248); +#299516 = PRESENTATION_STYLE_ASSIGNMENT((#299517,#299522)); +#299517 = SURFACE_STYLE_USAGE(.BOTH.,#299518); +#299518 = SURFACE_SIDE_STYLE('',(#299519)); +#299519 = SURFACE_STYLE_FILL_AREA(#299520); +#299520 = FILL_AREA_STYLE('',(#299521)); +#299521 = FILL_AREA_STYLE_COLOUR('',#279624); +#299522 = CURVE_STYLE('',#299523,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299524 = STYLED_ITEM('color',(#299525),#27279); +#299525 = PRESENTATION_STYLE_ASSIGNMENT((#299526,#299531)); +#299526 = SURFACE_STYLE_USAGE(.BOTH.,#299527); +#299527 = SURFACE_SIDE_STYLE('',(#299528)); +#299528 = SURFACE_STYLE_FILL_AREA(#299529); +#299529 = FILL_AREA_STYLE('',(#299530)); +#299530 = FILL_AREA_STYLE_COLOUR('',#279624); +#299531 = CURVE_STYLE('',#299532,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299533 = OVER_RIDING_STYLED_ITEM('overriding color',(#299534),#27293, + #299524); +#299534 = PRESENTATION_STYLE_ASSIGNMENT((#299535,#299540)); +#299535 = SURFACE_STYLE_USAGE(.BOTH.,#299536); +#299536 = SURFACE_SIDE_STYLE('',(#299537)); +#299537 = SURFACE_STYLE_FILL_AREA(#299538); +#299538 = FILL_AREA_STYLE('',(#299539)); +#299539 = FILL_AREA_STYLE_COLOUR('',#280691); +#299540 = CURVE_STYLE('',#299541,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299542 = OVER_RIDING_STYLED_ITEM('overriding color',(#299543),#27309, + #299524); +#299543 = PRESENTATION_STYLE_ASSIGNMENT((#299544,#299549)); +#299544 = SURFACE_STYLE_USAGE(.BOTH.,#299545); +#299545 = SURFACE_SIDE_STYLE('',(#299546)); +#299546 = SURFACE_STYLE_FILL_AREA(#299547); +#299547 = FILL_AREA_STYLE('',(#299548)); +#299548 = FILL_AREA_STYLE_COLOUR('',#280691); +#299549 = CURVE_STYLE('',#299550,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299551 = STYLED_ITEM('color',(#299552),#27335); +#299552 = PRESENTATION_STYLE_ASSIGNMENT((#299553,#299558)); +#299553 = SURFACE_STYLE_USAGE(.BOTH.,#299554); +#299554 = SURFACE_SIDE_STYLE('',(#299555)); +#299555 = SURFACE_STYLE_FILL_AREA(#299556); +#299556 = FILL_AREA_STYLE('',(#299557)); +#299557 = FILL_AREA_STYLE_COLOUR('',#279624); +#299558 = CURVE_STYLE('',#299559,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299560 = STYLED_ITEM('color',(#299561),#27359); +#299561 = PRESENTATION_STYLE_ASSIGNMENT((#299562,#299567)); +#299562 = SURFACE_STYLE_USAGE(.BOTH.,#299563); +#299563 = SURFACE_SIDE_STYLE('',(#299564)); +#299564 = SURFACE_STYLE_FILL_AREA(#299565); +#299565 = FILL_AREA_STYLE('',(#299566)); +#299566 = FILL_AREA_STYLE_COLOUR('',#279624); +#299567 = CURVE_STYLE('',#299568,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299568 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299569 = OVER_RIDING_STYLED_ITEM('overriding color',(#299570),#27373, + #299560); +#299570 = PRESENTATION_STYLE_ASSIGNMENT((#299571,#299576)); +#299571 = SURFACE_STYLE_USAGE(.BOTH.,#299572); +#299572 = SURFACE_SIDE_STYLE('',(#299573)); +#299573 = SURFACE_STYLE_FILL_AREA(#299574); +#299574 = FILL_AREA_STYLE('',(#299575)); +#299575 = FILL_AREA_STYLE_COLOUR('',#280691); +#299576 = CURVE_STYLE('',#299577,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299578 = OVER_RIDING_STYLED_ITEM('overriding color',(#299579),#27389, + #299560); +#299579 = PRESENTATION_STYLE_ASSIGNMENT((#299580,#299585)); +#299580 = SURFACE_STYLE_USAGE(.BOTH.,#299581); +#299581 = SURFACE_SIDE_STYLE('',(#299582)); +#299582 = SURFACE_STYLE_FILL_AREA(#299583); +#299583 = FILL_AREA_STYLE('',(#299584)); +#299584 = FILL_AREA_STYLE_COLOUR('',#280691); +#299585 = CURVE_STYLE('',#299586,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299587 = STYLED_ITEM('color',(#299588),#27408); +#299588 = PRESENTATION_STYLE_ASSIGNMENT((#299589,#299594)); +#299589 = SURFACE_STYLE_USAGE(.BOTH.,#299590); +#299590 = SURFACE_SIDE_STYLE('',(#299591)); +#299591 = SURFACE_STYLE_FILL_AREA(#299592); +#299592 = FILL_AREA_STYLE('',(#299593)); +#299593 = FILL_AREA_STYLE_COLOUR('',#279624); +#299594 = CURVE_STYLE('',#299595,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299596 = STYLED_ITEM('color',(#299597),#27439); +#299597 = PRESENTATION_STYLE_ASSIGNMENT((#299598,#299603)); +#299598 = SURFACE_STYLE_USAGE(.BOTH.,#299599); +#299599 = SURFACE_SIDE_STYLE('',(#299600)); +#299600 = SURFACE_STYLE_FILL_AREA(#299601); +#299601 = FILL_AREA_STYLE('',(#299602)); +#299602 = FILL_AREA_STYLE_COLOUR('',#279624); +#299603 = CURVE_STYLE('',#299604,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299605 = OVER_RIDING_STYLED_ITEM('overriding color',(#299606),#27453, + #299596); +#299606 = PRESENTATION_STYLE_ASSIGNMENT((#299607,#299612)); +#299607 = SURFACE_STYLE_USAGE(.BOTH.,#299608); +#299608 = SURFACE_SIDE_STYLE('',(#299609)); +#299609 = SURFACE_STYLE_FILL_AREA(#299610); +#299610 = FILL_AREA_STYLE('',(#299611)); +#299611 = FILL_AREA_STYLE_COLOUR('',#280691); +#299612 = CURVE_STYLE('',#299613,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299613 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299614 = OVER_RIDING_STYLED_ITEM('overriding color',(#299615),#27469, + #299596); +#299615 = PRESENTATION_STYLE_ASSIGNMENT((#299616,#299621)); +#299616 = SURFACE_STYLE_USAGE(.BOTH.,#299617); +#299617 = SURFACE_SIDE_STYLE('',(#299618)); +#299618 = SURFACE_STYLE_FILL_AREA(#299619); +#299619 = FILL_AREA_STYLE('',(#299620)); +#299620 = FILL_AREA_STYLE_COLOUR('',#280691); +#299621 = CURVE_STYLE('',#299622,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299622 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299623 = STYLED_ITEM('color',(#299624),#27495); +#299624 = PRESENTATION_STYLE_ASSIGNMENT((#299625,#299630)); +#299625 = SURFACE_STYLE_USAGE(.BOTH.,#299626); +#299626 = SURFACE_SIDE_STYLE('',(#299627)); +#299627 = SURFACE_STYLE_FILL_AREA(#299628); +#299628 = FILL_AREA_STYLE('',(#299629)); +#299629 = FILL_AREA_STYLE_COLOUR('',#279624); +#299630 = CURVE_STYLE('',#299631,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299631 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299632 = STYLED_ITEM('color',(#299633),#27519); +#299633 = PRESENTATION_STYLE_ASSIGNMENT((#299634,#299639)); +#299634 = SURFACE_STYLE_USAGE(.BOTH.,#299635); +#299635 = SURFACE_SIDE_STYLE('',(#299636)); +#299636 = SURFACE_STYLE_FILL_AREA(#299637); +#299637 = FILL_AREA_STYLE('',(#299638)); +#299638 = FILL_AREA_STYLE_COLOUR('',#279624); +#299639 = CURVE_STYLE('',#299640,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299641 = OVER_RIDING_STYLED_ITEM('overriding color',(#299642),#27533, + #299632); +#299642 = PRESENTATION_STYLE_ASSIGNMENT((#299643,#299648)); +#299643 = SURFACE_STYLE_USAGE(.BOTH.,#299644); +#299644 = SURFACE_SIDE_STYLE('',(#299645)); +#299645 = SURFACE_STYLE_FILL_AREA(#299646); +#299646 = FILL_AREA_STYLE('',(#299647)); +#299647 = FILL_AREA_STYLE_COLOUR('',#280691); +#299648 = CURVE_STYLE('',#299649,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299649 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299650 = OVER_RIDING_STYLED_ITEM('overriding color',(#299651),#27549, + #299632); +#299651 = PRESENTATION_STYLE_ASSIGNMENT((#299652,#299657)); +#299652 = SURFACE_STYLE_USAGE(.BOTH.,#299653); +#299653 = SURFACE_SIDE_STYLE('',(#299654)); +#299654 = SURFACE_STYLE_FILL_AREA(#299655); +#299655 = FILL_AREA_STYLE('',(#299656)); +#299656 = FILL_AREA_STYLE_COLOUR('',#280691); +#299657 = CURVE_STYLE('',#299658,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299658 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299659 = STYLED_ITEM('color',(#299660),#27568); +#299660 = PRESENTATION_STYLE_ASSIGNMENT((#299661,#299666)); +#299661 = SURFACE_STYLE_USAGE(.BOTH.,#299662); +#299662 = SURFACE_SIDE_STYLE('',(#299663)); +#299663 = SURFACE_STYLE_FILL_AREA(#299664); +#299664 = FILL_AREA_STYLE('',(#299665)); +#299665 = FILL_AREA_STYLE_COLOUR('',#279624); +#299666 = CURVE_STYLE('',#299667,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299667 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299668 = STYLED_ITEM('color',(#299669),#27599); +#299669 = PRESENTATION_STYLE_ASSIGNMENT((#299670,#299675)); +#299670 = SURFACE_STYLE_USAGE(.BOTH.,#299671); +#299671 = SURFACE_SIDE_STYLE('',(#299672)); +#299672 = SURFACE_STYLE_FILL_AREA(#299673); +#299673 = FILL_AREA_STYLE('',(#299674)); +#299674 = FILL_AREA_STYLE_COLOUR('',#279624); +#299675 = CURVE_STYLE('',#299676,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299676 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299677 = OVER_RIDING_STYLED_ITEM('overriding color',(#299678),#27613, + #299668); +#299678 = PRESENTATION_STYLE_ASSIGNMENT((#299679,#299684)); +#299679 = SURFACE_STYLE_USAGE(.BOTH.,#299680); +#299680 = SURFACE_SIDE_STYLE('',(#299681)); +#299681 = SURFACE_STYLE_FILL_AREA(#299682); +#299682 = FILL_AREA_STYLE('',(#299683)); +#299683 = FILL_AREA_STYLE_COLOUR('',#280691); +#299684 = CURVE_STYLE('',#299685,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299685 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299686 = OVER_RIDING_STYLED_ITEM('overriding color',(#299687),#27629, + #299668); +#299687 = PRESENTATION_STYLE_ASSIGNMENT((#299688,#299693)); +#299688 = SURFACE_STYLE_USAGE(.BOTH.,#299689); +#299689 = SURFACE_SIDE_STYLE('',(#299690)); +#299690 = SURFACE_STYLE_FILL_AREA(#299691); +#299691 = FILL_AREA_STYLE('',(#299692)); +#299692 = FILL_AREA_STYLE_COLOUR('',#280691); +#299693 = CURVE_STYLE('',#299694,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299694 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299695 = STYLED_ITEM('color',(#299696),#27655); +#299696 = PRESENTATION_STYLE_ASSIGNMENT((#299697,#299702)); +#299697 = SURFACE_STYLE_USAGE(.BOTH.,#299698); +#299698 = SURFACE_SIDE_STYLE('',(#299699)); +#299699 = SURFACE_STYLE_FILL_AREA(#299700); +#299700 = FILL_AREA_STYLE('',(#299701)); +#299701 = FILL_AREA_STYLE_COLOUR('',#279624); +#299702 = CURVE_STYLE('',#299703,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299703 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299704 = STYLED_ITEM('color',(#299705),#27679); +#299705 = PRESENTATION_STYLE_ASSIGNMENT((#299706,#299711)); +#299706 = SURFACE_STYLE_USAGE(.BOTH.,#299707); +#299707 = SURFACE_SIDE_STYLE('',(#299708)); +#299708 = SURFACE_STYLE_FILL_AREA(#299709); +#299709 = FILL_AREA_STYLE('',(#299710)); +#299710 = FILL_AREA_STYLE_COLOUR('',#279624); +#299711 = CURVE_STYLE('',#299712,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299712 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299713 = OVER_RIDING_STYLED_ITEM('overriding color',(#299714),#27693, + #299704); +#299714 = PRESENTATION_STYLE_ASSIGNMENT((#299715,#299720)); +#299715 = SURFACE_STYLE_USAGE(.BOTH.,#299716); +#299716 = SURFACE_SIDE_STYLE('',(#299717)); +#299717 = SURFACE_STYLE_FILL_AREA(#299718); +#299718 = FILL_AREA_STYLE('',(#299719)); +#299719 = FILL_AREA_STYLE_COLOUR('',#280691); +#299720 = CURVE_STYLE('',#299721,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299721 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299722 = OVER_RIDING_STYLED_ITEM('overriding color',(#299723),#27709, + #299704); +#299723 = PRESENTATION_STYLE_ASSIGNMENT((#299724,#299729)); +#299724 = SURFACE_STYLE_USAGE(.BOTH.,#299725); +#299725 = SURFACE_SIDE_STYLE('',(#299726)); +#299726 = SURFACE_STYLE_FILL_AREA(#299727); +#299727 = FILL_AREA_STYLE('',(#299728)); +#299728 = FILL_AREA_STYLE_COLOUR('',#280691); +#299729 = CURVE_STYLE('',#299730,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299730 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299731 = STYLED_ITEM('color',(#299732),#27728); +#299732 = PRESENTATION_STYLE_ASSIGNMENT((#299733,#299738)); +#299733 = SURFACE_STYLE_USAGE(.BOTH.,#299734); +#299734 = SURFACE_SIDE_STYLE('',(#299735)); +#299735 = SURFACE_STYLE_FILL_AREA(#299736); +#299736 = FILL_AREA_STYLE('',(#299737)); +#299737 = FILL_AREA_STYLE_COLOUR('',#279624); +#299738 = CURVE_STYLE('',#299739,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299739 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299740 = STYLED_ITEM('color',(#299741),#27759); +#299741 = PRESENTATION_STYLE_ASSIGNMENT((#299742,#299747)); +#299742 = SURFACE_STYLE_USAGE(.BOTH.,#299743); +#299743 = SURFACE_SIDE_STYLE('',(#299744)); +#299744 = SURFACE_STYLE_FILL_AREA(#299745); +#299745 = FILL_AREA_STYLE('',(#299746)); +#299746 = FILL_AREA_STYLE_COLOUR('',#279624); +#299747 = CURVE_STYLE('',#299748,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299748 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299749 = OVER_RIDING_STYLED_ITEM('overriding color',(#299750),#27773, + #299740); +#299750 = PRESENTATION_STYLE_ASSIGNMENT((#299751,#299756)); +#299751 = SURFACE_STYLE_USAGE(.BOTH.,#299752); +#299752 = SURFACE_SIDE_STYLE('',(#299753)); +#299753 = SURFACE_STYLE_FILL_AREA(#299754); +#299754 = FILL_AREA_STYLE('',(#299755)); +#299755 = FILL_AREA_STYLE_COLOUR('',#280691); +#299756 = CURVE_STYLE('',#299757,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299757 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299758 = OVER_RIDING_STYLED_ITEM('overriding color',(#299759),#27789, + #299740); +#299759 = PRESENTATION_STYLE_ASSIGNMENT((#299760,#299765)); +#299760 = SURFACE_STYLE_USAGE(.BOTH.,#299761); +#299761 = SURFACE_SIDE_STYLE('',(#299762)); +#299762 = SURFACE_STYLE_FILL_AREA(#299763); +#299763 = FILL_AREA_STYLE('',(#299764)); +#299764 = FILL_AREA_STYLE_COLOUR('',#280691); +#299765 = CURVE_STYLE('',#299766,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299766 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299767 = STYLED_ITEM('color',(#299768),#27815); +#299768 = PRESENTATION_STYLE_ASSIGNMENT((#299769,#299774)); +#299769 = SURFACE_STYLE_USAGE(.BOTH.,#299770); +#299770 = SURFACE_SIDE_STYLE('',(#299771)); +#299771 = SURFACE_STYLE_FILL_AREA(#299772); +#299772 = FILL_AREA_STYLE('',(#299773)); +#299773 = FILL_AREA_STYLE_COLOUR('',#279624); +#299774 = CURVE_STYLE('',#299775,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299775 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299776 = STYLED_ITEM('color',(#299777),#27839); +#299777 = PRESENTATION_STYLE_ASSIGNMENT((#299778,#299783)); +#299778 = SURFACE_STYLE_USAGE(.BOTH.,#299779); +#299779 = SURFACE_SIDE_STYLE('',(#299780)); +#299780 = SURFACE_STYLE_FILL_AREA(#299781); +#299781 = FILL_AREA_STYLE('',(#299782)); +#299782 = FILL_AREA_STYLE_COLOUR('',#279624); +#299783 = CURVE_STYLE('',#299784,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299784 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299785 = OVER_RIDING_STYLED_ITEM('overriding color',(#299786),#27853, + #299776); +#299786 = PRESENTATION_STYLE_ASSIGNMENT((#299787,#299792)); +#299787 = SURFACE_STYLE_USAGE(.BOTH.,#299788); +#299788 = SURFACE_SIDE_STYLE('',(#299789)); +#299789 = SURFACE_STYLE_FILL_AREA(#299790); +#299790 = FILL_AREA_STYLE('',(#299791)); +#299791 = FILL_AREA_STYLE_COLOUR('',#280691); +#299792 = CURVE_STYLE('',#299793,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299793 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299794 = OVER_RIDING_STYLED_ITEM('overriding color',(#299795),#27869, + #299776); +#299795 = PRESENTATION_STYLE_ASSIGNMENT((#299796,#299801)); +#299796 = SURFACE_STYLE_USAGE(.BOTH.,#299797); +#299797 = SURFACE_SIDE_STYLE('',(#299798)); +#299798 = SURFACE_STYLE_FILL_AREA(#299799); +#299799 = FILL_AREA_STYLE('',(#299800)); +#299800 = FILL_AREA_STYLE_COLOUR('',#280691); +#299801 = CURVE_STYLE('',#299802,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299802 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299803 = STYLED_ITEM('color',(#299804),#27888); +#299804 = PRESENTATION_STYLE_ASSIGNMENT((#299805,#299810)); +#299805 = SURFACE_STYLE_USAGE(.BOTH.,#299806); +#299806 = SURFACE_SIDE_STYLE('',(#299807)); +#299807 = SURFACE_STYLE_FILL_AREA(#299808); +#299808 = FILL_AREA_STYLE('',(#299809)); +#299809 = FILL_AREA_STYLE_COLOUR('',#279624); +#299810 = CURVE_STYLE('',#299811,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299811 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299812 = STYLED_ITEM('color',(#299813),#27919); +#299813 = PRESENTATION_STYLE_ASSIGNMENT((#299814,#299819)); +#299814 = SURFACE_STYLE_USAGE(.BOTH.,#299815); +#299815 = SURFACE_SIDE_STYLE('',(#299816)); +#299816 = SURFACE_STYLE_FILL_AREA(#299817); +#299817 = FILL_AREA_STYLE('',(#299818)); +#299818 = FILL_AREA_STYLE_COLOUR('',#279624); +#299819 = CURVE_STYLE('',#299820,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299820 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299821 = OVER_RIDING_STYLED_ITEM('overriding color',(#299822),#27933, + #299812); +#299822 = PRESENTATION_STYLE_ASSIGNMENT((#299823,#299828)); +#299823 = SURFACE_STYLE_USAGE(.BOTH.,#299824); +#299824 = SURFACE_SIDE_STYLE('',(#299825)); +#299825 = SURFACE_STYLE_FILL_AREA(#299826); +#299826 = FILL_AREA_STYLE('',(#299827)); +#299827 = FILL_AREA_STYLE_COLOUR('',#280691); +#299828 = CURVE_STYLE('',#299829,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299829 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299830 = OVER_RIDING_STYLED_ITEM('overriding color',(#299831),#27949, + #299812); +#299831 = PRESENTATION_STYLE_ASSIGNMENT((#299832,#299837)); +#299832 = SURFACE_STYLE_USAGE(.BOTH.,#299833); +#299833 = SURFACE_SIDE_STYLE('',(#299834)); +#299834 = SURFACE_STYLE_FILL_AREA(#299835); +#299835 = FILL_AREA_STYLE('',(#299836)); +#299836 = FILL_AREA_STYLE_COLOUR('',#280691); +#299837 = CURVE_STYLE('',#299838,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299838 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299839 = STYLED_ITEM('color',(#299840),#27975); +#299840 = PRESENTATION_STYLE_ASSIGNMENT((#299841,#299846)); +#299841 = SURFACE_STYLE_USAGE(.BOTH.,#299842); +#299842 = SURFACE_SIDE_STYLE('',(#299843)); +#299843 = SURFACE_STYLE_FILL_AREA(#299844); +#299844 = FILL_AREA_STYLE('',(#299845)); +#299845 = FILL_AREA_STYLE_COLOUR('',#279624); +#299846 = CURVE_STYLE('',#299847,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299847 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299848 = STYLED_ITEM('color',(#299849),#27999); +#299849 = PRESENTATION_STYLE_ASSIGNMENT((#299850,#299855)); +#299850 = SURFACE_STYLE_USAGE(.BOTH.,#299851); +#299851 = SURFACE_SIDE_STYLE('',(#299852)); +#299852 = SURFACE_STYLE_FILL_AREA(#299853); +#299853 = FILL_AREA_STYLE('',(#299854)); +#299854 = FILL_AREA_STYLE_COLOUR('',#279624); +#299855 = CURVE_STYLE('',#299856,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299856 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299857 = OVER_RIDING_STYLED_ITEM('overriding color',(#299858),#28013, + #299848); +#299858 = PRESENTATION_STYLE_ASSIGNMENT((#299859,#299864)); +#299859 = SURFACE_STYLE_USAGE(.BOTH.,#299860); +#299860 = SURFACE_SIDE_STYLE('',(#299861)); +#299861 = SURFACE_STYLE_FILL_AREA(#299862); +#299862 = FILL_AREA_STYLE('',(#299863)); +#299863 = FILL_AREA_STYLE_COLOUR('',#280691); +#299864 = CURVE_STYLE('',#299865,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299865 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299866 = OVER_RIDING_STYLED_ITEM('overriding color',(#299867),#28029, + #299848); +#299867 = PRESENTATION_STYLE_ASSIGNMENT((#299868,#299873)); +#299868 = SURFACE_STYLE_USAGE(.BOTH.,#299869); +#299869 = SURFACE_SIDE_STYLE('',(#299870)); +#299870 = SURFACE_STYLE_FILL_AREA(#299871); +#299871 = FILL_AREA_STYLE('',(#299872)); +#299872 = FILL_AREA_STYLE_COLOUR('',#280691); +#299873 = CURVE_STYLE('',#299874,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299874 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299875 = STYLED_ITEM('color',(#299876),#28048); +#299876 = PRESENTATION_STYLE_ASSIGNMENT((#299877,#299882)); +#299877 = SURFACE_STYLE_USAGE(.BOTH.,#299878); +#299878 = SURFACE_SIDE_STYLE('',(#299879)); +#299879 = SURFACE_STYLE_FILL_AREA(#299880); +#299880 = FILL_AREA_STYLE('',(#299881)); +#299881 = FILL_AREA_STYLE_COLOUR('',#279624); +#299882 = CURVE_STYLE('',#299883,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299883 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299884 = STYLED_ITEM('color',(#299885),#28079); +#299885 = PRESENTATION_STYLE_ASSIGNMENT((#299886,#299891)); +#299886 = SURFACE_STYLE_USAGE(.BOTH.,#299887); +#299887 = SURFACE_SIDE_STYLE('',(#299888)); +#299888 = SURFACE_STYLE_FILL_AREA(#299889); +#299889 = FILL_AREA_STYLE('',(#299890)); +#299890 = FILL_AREA_STYLE_COLOUR('',#279624); +#299891 = CURVE_STYLE('',#299892,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299892 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299893 = OVER_RIDING_STYLED_ITEM('overriding color',(#299894),#28093, + #299884); +#299894 = PRESENTATION_STYLE_ASSIGNMENT((#299895,#299900)); +#299895 = SURFACE_STYLE_USAGE(.BOTH.,#299896); +#299896 = SURFACE_SIDE_STYLE('',(#299897)); +#299897 = SURFACE_STYLE_FILL_AREA(#299898); +#299898 = FILL_AREA_STYLE('',(#299899)); +#299899 = FILL_AREA_STYLE_COLOUR('',#280691); +#299900 = CURVE_STYLE('',#299901,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299901 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299902 = OVER_RIDING_STYLED_ITEM('overriding color',(#299903),#28109, + #299884); +#299903 = PRESENTATION_STYLE_ASSIGNMENT((#299904,#299909)); +#299904 = SURFACE_STYLE_USAGE(.BOTH.,#299905); +#299905 = SURFACE_SIDE_STYLE('',(#299906)); +#299906 = SURFACE_STYLE_FILL_AREA(#299907); +#299907 = FILL_AREA_STYLE('',(#299908)); +#299908 = FILL_AREA_STYLE_COLOUR('',#280691); +#299909 = CURVE_STYLE('',#299910,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299910 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299911 = STYLED_ITEM('color',(#299912),#28135); +#299912 = PRESENTATION_STYLE_ASSIGNMENT((#299913,#299918)); +#299913 = SURFACE_STYLE_USAGE(.BOTH.,#299914); +#299914 = SURFACE_SIDE_STYLE('',(#299915)); +#299915 = SURFACE_STYLE_FILL_AREA(#299916); +#299916 = FILL_AREA_STYLE('',(#299917)); +#299917 = FILL_AREA_STYLE_COLOUR('',#279624); +#299918 = CURVE_STYLE('',#299919,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299919 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299920 = STYLED_ITEM('color',(#299921),#28159); +#299921 = PRESENTATION_STYLE_ASSIGNMENT((#299922,#299927)); +#299922 = SURFACE_STYLE_USAGE(.BOTH.,#299923); +#299923 = SURFACE_SIDE_STYLE('',(#299924)); +#299924 = SURFACE_STYLE_FILL_AREA(#299925); +#299925 = FILL_AREA_STYLE('',(#299926)); +#299926 = FILL_AREA_STYLE_COLOUR('',#279624); +#299927 = CURVE_STYLE('',#299928,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299928 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299929 = OVER_RIDING_STYLED_ITEM('overriding color',(#299930),#28173, + #299920); +#299930 = PRESENTATION_STYLE_ASSIGNMENT((#299931,#299936)); +#299931 = SURFACE_STYLE_USAGE(.BOTH.,#299932); +#299932 = SURFACE_SIDE_STYLE('',(#299933)); +#299933 = SURFACE_STYLE_FILL_AREA(#299934); +#299934 = FILL_AREA_STYLE('',(#299935)); +#299935 = FILL_AREA_STYLE_COLOUR('',#280691); +#299936 = CURVE_STYLE('',#299937,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299937 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299938 = OVER_RIDING_STYLED_ITEM('overriding color',(#299939),#28189, + #299920); +#299939 = PRESENTATION_STYLE_ASSIGNMENT((#299940,#299945)); +#299940 = SURFACE_STYLE_USAGE(.BOTH.,#299941); +#299941 = SURFACE_SIDE_STYLE('',(#299942)); +#299942 = SURFACE_STYLE_FILL_AREA(#299943); +#299943 = FILL_AREA_STYLE('',(#299944)); +#299944 = FILL_AREA_STYLE_COLOUR('',#280691); +#299945 = CURVE_STYLE('',#299946,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299946 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299947 = STYLED_ITEM('color',(#299948),#28208); +#299948 = PRESENTATION_STYLE_ASSIGNMENT((#299949,#299954)); +#299949 = SURFACE_STYLE_USAGE(.BOTH.,#299950); +#299950 = SURFACE_SIDE_STYLE('',(#299951)); +#299951 = SURFACE_STYLE_FILL_AREA(#299952); +#299952 = FILL_AREA_STYLE('',(#299953)); +#299953 = FILL_AREA_STYLE_COLOUR('',#279624); +#299954 = CURVE_STYLE('',#299955,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299955 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299956 = STYLED_ITEM('color',(#299957),#28239); +#299957 = PRESENTATION_STYLE_ASSIGNMENT((#299958,#299963)); +#299958 = SURFACE_STYLE_USAGE(.BOTH.,#299959); +#299959 = SURFACE_SIDE_STYLE('',(#299960)); +#299960 = SURFACE_STYLE_FILL_AREA(#299961); +#299961 = FILL_AREA_STYLE('',(#299962)); +#299962 = FILL_AREA_STYLE_COLOUR('',#279624); +#299963 = CURVE_STYLE('',#299964,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299964 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299965 = OVER_RIDING_STYLED_ITEM('overriding color',(#299966),#28253, + #299956); +#299966 = PRESENTATION_STYLE_ASSIGNMENT((#299967,#299972)); +#299967 = SURFACE_STYLE_USAGE(.BOTH.,#299968); +#299968 = SURFACE_SIDE_STYLE('',(#299969)); +#299969 = SURFACE_STYLE_FILL_AREA(#299970); +#299970 = FILL_AREA_STYLE('',(#299971)); +#299971 = FILL_AREA_STYLE_COLOUR('',#280691); +#299972 = CURVE_STYLE('',#299973,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299973 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299974 = OVER_RIDING_STYLED_ITEM('overriding color',(#299975),#28269, + #299956); +#299975 = PRESENTATION_STYLE_ASSIGNMENT((#299976,#299981)); +#299976 = SURFACE_STYLE_USAGE(.BOTH.,#299977); +#299977 = SURFACE_SIDE_STYLE('',(#299978)); +#299978 = SURFACE_STYLE_FILL_AREA(#299979); +#299979 = FILL_AREA_STYLE('',(#299980)); +#299980 = FILL_AREA_STYLE_COLOUR('',#280691); +#299981 = CURVE_STYLE('',#299982,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#299982 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299983 = STYLED_ITEM('color',(#299984),#28295); +#299984 = PRESENTATION_STYLE_ASSIGNMENT((#299985,#299990)); +#299985 = SURFACE_STYLE_USAGE(.BOTH.,#299986); +#299986 = SURFACE_SIDE_STYLE('',(#299987)); +#299987 = SURFACE_STYLE_FILL_AREA(#299988); +#299988 = FILL_AREA_STYLE('',(#299989)); +#299989 = FILL_AREA_STYLE_COLOUR('',#279624); +#299990 = CURVE_STYLE('',#299991,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#299991 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299992 = STYLED_ITEM('color',(#299993),#28319); +#299993 = PRESENTATION_STYLE_ASSIGNMENT((#299994,#299999)); +#299994 = SURFACE_STYLE_USAGE(.BOTH.,#299995); +#299995 = SURFACE_SIDE_STYLE('',(#299996)); +#299996 = SURFACE_STYLE_FILL_AREA(#299997); +#299997 = FILL_AREA_STYLE('',(#299998)); +#299998 = FILL_AREA_STYLE_COLOUR('',#279624); +#299999 = CURVE_STYLE('',#300000,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300000 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300001 = OVER_RIDING_STYLED_ITEM('overriding color',(#300002),#28333, + #299992); +#300002 = PRESENTATION_STYLE_ASSIGNMENT((#300003,#300008)); +#300003 = SURFACE_STYLE_USAGE(.BOTH.,#300004); +#300004 = SURFACE_SIDE_STYLE('',(#300005)); +#300005 = SURFACE_STYLE_FILL_AREA(#300006); +#300006 = FILL_AREA_STYLE('',(#300007)); +#300007 = FILL_AREA_STYLE_COLOUR('',#280691); +#300008 = CURVE_STYLE('',#300009,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300009 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300010 = OVER_RIDING_STYLED_ITEM('overriding color',(#300011),#28349, + #299992); +#300011 = PRESENTATION_STYLE_ASSIGNMENT((#300012,#300017)); +#300012 = SURFACE_STYLE_USAGE(.BOTH.,#300013); +#300013 = SURFACE_SIDE_STYLE('',(#300014)); +#300014 = SURFACE_STYLE_FILL_AREA(#300015); +#300015 = FILL_AREA_STYLE('',(#300016)); +#300016 = FILL_AREA_STYLE_COLOUR('',#280691); +#300017 = CURVE_STYLE('',#300018,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300018 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300019 = STYLED_ITEM('color',(#300020),#28368); +#300020 = PRESENTATION_STYLE_ASSIGNMENT((#300021,#300026)); +#300021 = SURFACE_STYLE_USAGE(.BOTH.,#300022); +#300022 = SURFACE_SIDE_STYLE('',(#300023)); +#300023 = SURFACE_STYLE_FILL_AREA(#300024); +#300024 = FILL_AREA_STYLE('',(#300025)); +#300025 = FILL_AREA_STYLE_COLOUR('',#279624); +#300026 = CURVE_STYLE('',#300027,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300027 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300028 = STYLED_ITEM('color',(#300029),#28399); +#300029 = PRESENTATION_STYLE_ASSIGNMENT((#300030,#300035)); +#300030 = SURFACE_STYLE_USAGE(.BOTH.,#300031); +#300031 = SURFACE_SIDE_STYLE('',(#300032)); +#300032 = SURFACE_STYLE_FILL_AREA(#300033); +#300033 = FILL_AREA_STYLE('',(#300034)); +#300034 = FILL_AREA_STYLE_COLOUR('',#279624); +#300035 = CURVE_STYLE('',#300036,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300036 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300037 = OVER_RIDING_STYLED_ITEM('overriding color',(#300038),#28413, + #300028); +#300038 = PRESENTATION_STYLE_ASSIGNMENT((#300039,#300044)); +#300039 = SURFACE_STYLE_USAGE(.BOTH.,#300040); +#300040 = SURFACE_SIDE_STYLE('',(#300041)); +#300041 = SURFACE_STYLE_FILL_AREA(#300042); +#300042 = FILL_AREA_STYLE('',(#300043)); +#300043 = FILL_AREA_STYLE_COLOUR('',#280691); +#300044 = CURVE_STYLE('',#300045,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300045 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300046 = OVER_RIDING_STYLED_ITEM('overriding color',(#300047),#28429, + #300028); +#300047 = PRESENTATION_STYLE_ASSIGNMENT((#300048,#300053)); +#300048 = SURFACE_STYLE_USAGE(.BOTH.,#300049); +#300049 = SURFACE_SIDE_STYLE('',(#300050)); +#300050 = SURFACE_STYLE_FILL_AREA(#300051); +#300051 = FILL_AREA_STYLE('',(#300052)); +#300052 = FILL_AREA_STYLE_COLOUR('',#280691); +#300053 = CURVE_STYLE('',#300054,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300054 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300055 = STYLED_ITEM('color',(#300056),#28455); +#300056 = PRESENTATION_STYLE_ASSIGNMENT((#300057,#300062)); +#300057 = SURFACE_STYLE_USAGE(.BOTH.,#300058); +#300058 = SURFACE_SIDE_STYLE('',(#300059)); +#300059 = SURFACE_STYLE_FILL_AREA(#300060); +#300060 = FILL_AREA_STYLE('',(#300061)); +#300061 = FILL_AREA_STYLE_COLOUR('',#279624); +#300062 = CURVE_STYLE('',#300063,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300063 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300064 = STYLED_ITEM('color',(#300065),#28479); +#300065 = PRESENTATION_STYLE_ASSIGNMENT((#300066,#300071)); +#300066 = SURFACE_STYLE_USAGE(.BOTH.,#300067); +#300067 = SURFACE_SIDE_STYLE('',(#300068)); +#300068 = SURFACE_STYLE_FILL_AREA(#300069); +#300069 = FILL_AREA_STYLE('',(#300070)); +#300070 = FILL_AREA_STYLE_COLOUR('',#279624); +#300071 = CURVE_STYLE('',#300072,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300072 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300073 = OVER_RIDING_STYLED_ITEM('overriding color',(#300074),#28493, + #300064); +#300074 = PRESENTATION_STYLE_ASSIGNMENT((#300075,#300080)); +#300075 = SURFACE_STYLE_USAGE(.BOTH.,#300076); +#300076 = SURFACE_SIDE_STYLE('',(#300077)); +#300077 = SURFACE_STYLE_FILL_AREA(#300078); +#300078 = FILL_AREA_STYLE('',(#300079)); +#300079 = FILL_AREA_STYLE_COLOUR('',#280691); +#300080 = CURVE_STYLE('',#300081,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300081 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300082 = OVER_RIDING_STYLED_ITEM('overriding color',(#300083),#28509, + #300064); +#300083 = PRESENTATION_STYLE_ASSIGNMENT((#300084,#300089)); +#300084 = SURFACE_STYLE_USAGE(.BOTH.,#300085); +#300085 = SURFACE_SIDE_STYLE('',(#300086)); +#300086 = SURFACE_STYLE_FILL_AREA(#300087); +#300087 = FILL_AREA_STYLE('',(#300088)); +#300088 = FILL_AREA_STYLE_COLOUR('',#280691); +#300089 = CURVE_STYLE('',#300090,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300090 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300091 = STYLED_ITEM('color',(#300092),#28528); +#300092 = PRESENTATION_STYLE_ASSIGNMENT((#300093,#300098)); +#300093 = SURFACE_STYLE_USAGE(.BOTH.,#300094); +#300094 = SURFACE_SIDE_STYLE('',(#300095)); +#300095 = SURFACE_STYLE_FILL_AREA(#300096); +#300096 = FILL_AREA_STYLE('',(#300097)); +#300097 = FILL_AREA_STYLE_COLOUR('',#279624); +#300098 = CURVE_STYLE('',#300099,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300099 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300100 = STYLED_ITEM('color',(#300101),#28559); +#300101 = PRESENTATION_STYLE_ASSIGNMENT((#300102,#300107)); +#300102 = SURFACE_STYLE_USAGE(.BOTH.,#300103); +#300103 = SURFACE_SIDE_STYLE('',(#300104)); +#300104 = SURFACE_STYLE_FILL_AREA(#300105); +#300105 = FILL_AREA_STYLE('',(#300106)); +#300106 = FILL_AREA_STYLE_COLOUR('',#279624); +#300107 = CURVE_STYLE('',#300108,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300108 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300109 = OVER_RIDING_STYLED_ITEM('overriding color',(#300110),#28573, + #300100); +#300110 = PRESENTATION_STYLE_ASSIGNMENT((#300111,#300116)); +#300111 = SURFACE_STYLE_USAGE(.BOTH.,#300112); +#300112 = SURFACE_SIDE_STYLE('',(#300113)); +#300113 = SURFACE_STYLE_FILL_AREA(#300114); +#300114 = FILL_AREA_STYLE('',(#300115)); +#300115 = FILL_AREA_STYLE_COLOUR('',#280691); +#300116 = CURVE_STYLE('',#300117,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300117 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300118 = OVER_RIDING_STYLED_ITEM('overriding color',(#300119),#28589, + #300100); +#300119 = PRESENTATION_STYLE_ASSIGNMENT((#300120,#300125)); +#300120 = SURFACE_STYLE_USAGE(.BOTH.,#300121); +#300121 = SURFACE_SIDE_STYLE('',(#300122)); +#300122 = SURFACE_STYLE_FILL_AREA(#300123); +#300123 = FILL_AREA_STYLE('',(#300124)); +#300124 = FILL_AREA_STYLE_COLOUR('',#280691); +#300125 = CURVE_STYLE('',#300126,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300126 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300127 = STYLED_ITEM('color',(#300128),#28615); +#300128 = PRESENTATION_STYLE_ASSIGNMENT((#300129,#300134)); +#300129 = SURFACE_STYLE_USAGE(.BOTH.,#300130); +#300130 = SURFACE_SIDE_STYLE('',(#300131)); +#300131 = SURFACE_STYLE_FILL_AREA(#300132); +#300132 = FILL_AREA_STYLE('',(#300133)); +#300133 = FILL_AREA_STYLE_COLOUR('',#279624); +#300134 = CURVE_STYLE('',#300135,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300135 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300136 = STYLED_ITEM('color',(#300137),#28639); +#300137 = PRESENTATION_STYLE_ASSIGNMENT((#300138,#300143)); +#300138 = SURFACE_STYLE_USAGE(.BOTH.,#300139); +#300139 = SURFACE_SIDE_STYLE('',(#300140)); +#300140 = SURFACE_STYLE_FILL_AREA(#300141); +#300141 = FILL_AREA_STYLE('',(#300142)); +#300142 = FILL_AREA_STYLE_COLOUR('',#279624); +#300143 = CURVE_STYLE('',#300144,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300144 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300145 = OVER_RIDING_STYLED_ITEM('overriding color',(#300146),#28653, + #300136); +#300146 = PRESENTATION_STYLE_ASSIGNMENT((#300147,#300152)); +#300147 = SURFACE_STYLE_USAGE(.BOTH.,#300148); +#300148 = SURFACE_SIDE_STYLE('',(#300149)); +#300149 = SURFACE_STYLE_FILL_AREA(#300150); +#300150 = FILL_AREA_STYLE('',(#300151)); +#300151 = FILL_AREA_STYLE_COLOUR('',#280691); +#300152 = CURVE_STYLE('',#300153,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300153 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300154 = OVER_RIDING_STYLED_ITEM('overriding color',(#300155),#28669, + #300136); +#300155 = PRESENTATION_STYLE_ASSIGNMENT((#300156,#300161)); +#300156 = SURFACE_STYLE_USAGE(.BOTH.,#300157); +#300157 = SURFACE_SIDE_STYLE('',(#300158)); +#300158 = SURFACE_STYLE_FILL_AREA(#300159); +#300159 = FILL_AREA_STYLE('',(#300160)); +#300160 = FILL_AREA_STYLE_COLOUR('',#280691); +#300161 = CURVE_STYLE('',#300162,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300162 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300163 = STYLED_ITEM('color',(#300164),#28688); +#300164 = PRESENTATION_STYLE_ASSIGNMENT((#300165,#300170)); +#300165 = SURFACE_STYLE_USAGE(.BOTH.,#300166); +#300166 = SURFACE_SIDE_STYLE('',(#300167)); +#300167 = SURFACE_STYLE_FILL_AREA(#300168); +#300168 = FILL_AREA_STYLE('',(#300169)); +#300169 = FILL_AREA_STYLE_COLOUR('',#279624); +#300170 = CURVE_STYLE('',#300171,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300171 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300172 = STYLED_ITEM('color',(#300173),#28719); +#300173 = PRESENTATION_STYLE_ASSIGNMENT((#300174,#300179)); +#300174 = SURFACE_STYLE_USAGE(.BOTH.,#300175); +#300175 = SURFACE_SIDE_STYLE('',(#300176)); +#300176 = SURFACE_STYLE_FILL_AREA(#300177); +#300177 = FILL_AREA_STYLE('',(#300178)); +#300178 = FILL_AREA_STYLE_COLOUR('',#279624); +#300179 = CURVE_STYLE('',#300180,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300180 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300181 = OVER_RIDING_STYLED_ITEM('overriding color',(#300182),#28733, + #300172); +#300182 = PRESENTATION_STYLE_ASSIGNMENT((#300183,#300188)); +#300183 = SURFACE_STYLE_USAGE(.BOTH.,#300184); +#300184 = SURFACE_SIDE_STYLE('',(#300185)); +#300185 = SURFACE_STYLE_FILL_AREA(#300186); +#300186 = FILL_AREA_STYLE('',(#300187)); +#300187 = FILL_AREA_STYLE_COLOUR('',#280691); +#300188 = CURVE_STYLE('',#300189,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300189 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300190 = OVER_RIDING_STYLED_ITEM('overriding color',(#300191),#28749, + #300172); +#300191 = PRESENTATION_STYLE_ASSIGNMENT((#300192,#300197)); +#300192 = SURFACE_STYLE_USAGE(.BOTH.,#300193); +#300193 = SURFACE_SIDE_STYLE('',(#300194)); +#300194 = SURFACE_STYLE_FILL_AREA(#300195); +#300195 = FILL_AREA_STYLE('',(#300196)); +#300196 = FILL_AREA_STYLE_COLOUR('',#280691); +#300197 = CURVE_STYLE('',#300198,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300198 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300199 = STYLED_ITEM('color',(#300200),#28775); +#300200 = PRESENTATION_STYLE_ASSIGNMENT((#300201,#300206)); +#300201 = SURFACE_STYLE_USAGE(.BOTH.,#300202); +#300202 = SURFACE_SIDE_STYLE('',(#300203)); +#300203 = SURFACE_STYLE_FILL_AREA(#300204); +#300204 = FILL_AREA_STYLE('',(#300205)); +#300205 = FILL_AREA_STYLE_COLOUR('',#279624); +#300206 = CURVE_STYLE('',#300207,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300207 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300208 = STYLED_ITEM('color',(#300209),#28799); +#300209 = PRESENTATION_STYLE_ASSIGNMENT((#300210,#300215)); +#300210 = SURFACE_STYLE_USAGE(.BOTH.,#300211); +#300211 = SURFACE_SIDE_STYLE('',(#300212)); +#300212 = SURFACE_STYLE_FILL_AREA(#300213); +#300213 = FILL_AREA_STYLE('',(#300214)); +#300214 = FILL_AREA_STYLE_COLOUR('',#279624); +#300215 = CURVE_STYLE('',#300216,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300216 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300217 = OVER_RIDING_STYLED_ITEM('overriding color',(#300218),#28813, + #300208); +#300218 = PRESENTATION_STYLE_ASSIGNMENT((#300219,#300224)); +#300219 = SURFACE_STYLE_USAGE(.BOTH.,#300220); +#300220 = SURFACE_SIDE_STYLE('',(#300221)); +#300221 = SURFACE_STYLE_FILL_AREA(#300222); +#300222 = FILL_AREA_STYLE('',(#300223)); +#300223 = FILL_AREA_STYLE_COLOUR('',#280691); +#300224 = CURVE_STYLE('',#300225,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300225 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300226 = OVER_RIDING_STYLED_ITEM('overriding color',(#300227),#28829, + #300208); +#300227 = PRESENTATION_STYLE_ASSIGNMENT((#300228,#300233)); +#300228 = SURFACE_STYLE_USAGE(.BOTH.,#300229); +#300229 = SURFACE_SIDE_STYLE('',(#300230)); +#300230 = SURFACE_STYLE_FILL_AREA(#300231); +#300231 = FILL_AREA_STYLE('',(#300232)); +#300232 = FILL_AREA_STYLE_COLOUR('',#280691); +#300233 = CURVE_STYLE('',#300234,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300234 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300235 = STYLED_ITEM('color',(#300236),#28848); +#300236 = PRESENTATION_STYLE_ASSIGNMENT((#300237,#300242)); +#300237 = SURFACE_STYLE_USAGE(.BOTH.,#300238); +#300238 = SURFACE_SIDE_STYLE('',(#300239)); +#300239 = SURFACE_STYLE_FILL_AREA(#300240); +#300240 = FILL_AREA_STYLE('',(#300241)); +#300241 = FILL_AREA_STYLE_COLOUR('',#279624); +#300242 = CURVE_STYLE('',#300243,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300243 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300244 = STYLED_ITEM('color',(#300245),#28879); +#300245 = PRESENTATION_STYLE_ASSIGNMENT((#300246,#300251)); +#300246 = SURFACE_STYLE_USAGE(.BOTH.,#300247); +#300247 = SURFACE_SIDE_STYLE('',(#300248)); +#300248 = SURFACE_STYLE_FILL_AREA(#300249); +#300249 = FILL_AREA_STYLE('',(#300250)); +#300250 = FILL_AREA_STYLE_COLOUR('',#279624); +#300251 = CURVE_STYLE('',#300252,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300252 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300253 = OVER_RIDING_STYLED_ITEM('overriding color',(#300254),#28893, + #300244); +#300254 = PRESENTATION_STYLE_ASSIGNMENT((#300255,#300260)); +#300255 = SURFACE_STYLE_USAGE(.BOTH.,#300256); +#300256 = SURFACE_SIDE_STYLE('',(#300257)); +#300257 = SURFACE_STYLE_FILL_AREA(#300258); +#300258 = FILL_AREA_STYLE('',(#300259)); +#300259 = FILL_AREA_STYLE_COLOUR('',#280691); +#300260 = CURVE_STYLE('',#300261,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300261 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300262 = OVER_RIDING_STYLED_ITEM('overriding color',(#300263),#28909, + #300244); +#300263 = PRESENTATION_STYLE_ASSIGNMENT((#300264,#300269)); +#300264 = SURFACE_STYLE_USAGE(.BOTH.,#300265); +#300265 = SURFACE_SIDE_STYLE('',(#300266)); +#300266 = SURFACE_STYLE_FILL_AREA(#300267); +#300267 = FILL_AREA_STYLE('',(#300268)); +#300268 = FILL_AREA_STYLE_COLOUR('',#280691); +#300269 = CURVE_STYLE('',#300270,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300270 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300271 = STYLED_ITEM('color',(#300272),#28935); +#300272 = PRESENTATION_STYLE_ASSIGNMENT((#300273,#300278)); +#300273 = SURFACE_STYLE_USAGE(.BOTH.,#300274); +#300274 = SURFACE_SIDE_STYLE('',(#300275)); +#300275 = SURFACE_STYLE_FILL_AREA(#300276); +#300276 = FILL_AREA_STYLE('',(#300277)); +#300277 = FILL_AREA_STYLE_COLOUR('',#279624); +#300278 = CURVE_STYLE('',#300279,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300279 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300280 = STYLED_ITEM('color',(#300281),#28959); +#300281 = PRESENTATION_STYLE_ASSIGNMENT((#300282,#300287)); +#300282 = SURFACE_STYLE_USAGE(.BOTH.,#300283); +#300283 = SURFACE_SIDE_STYLE('',(#300284)); +#300284 = SURFACE_STYLE_FILL_AREA(#300285); +#300285 = FILL_AREA_STYLE('',(#300286)); +#300286 = FILL_AREA_STYLE_COLOUR('',#279624); +#300287 = CURVE_STYLE('',#300288,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300288 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300289 = OVER_RIDING_STYLED_ITEM('overriding color',(#300290),#28973, + #300280); +#300290 = PRESENTATION_STYLE_ASSIGNMENT((#300291,#300296)); +#300291 = SURFACE_STYLE_USAGE(.BOTH.,#300292); +#300292 = SURFACE_SIDE_STYLE('',(#300293)); +#300293 = SURFACE_STYLE_FILL_AREA(#300294); +#300294 = FILL_AREA_STYLE('',(#300295)); +#300295 = FILL_AREA_STYLE_COLOUR('',#280691); +#300296 = CURVE_STYLE('',#300297,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300297 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300298 = OVER_RIDING_STYLED_ITEM('overriding color',(#300299),#28989, + #300280); +#300299 = PRESENTATION_STYLE_ASSIGNMENT((#300300,#300305)); +#300300 = SURFACE_STYLE_USAGE(.BOTH.,#300301); +#300301 = SURFACE_SIDE_STYLE('',(#300302)); +#300302 = SURFACE_STYLE_FILL_AREA(#300303); +#300303 = FILL_AREA_STYLE('',(#300304)); +#300304 = FILL_AREA_STYLE_COLOUR('',#280691); +#300305 = CURVE_STYLE('',#300306,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300306 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300307 = STYLED_ITEM('color',(#300308),#29008); +#300308 = PRESENTATION_STYLE_ASSIGNMENT((#300309,#300314)); +#300309 = SURFACE_STYLE_USAGE(.BOTH.,#300310); +#300310 = SURFACE_SIDE_STYLE('',(#300311)); +#300311 = SURFACE_STYLE_FILL_AREA(#300312); +#300312 = FILL_AREA_STYLE('',(#300313)); +#300313 = FILL_AREA_STYLE_COLOUR('',#279624); +#300314 = CURVE_STYLE('',#300315,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300315 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300316 = STYLED_ITEM('color',(#300317),#29039); +#300317 = PRESENTATION_STYLE_ASSIGNMENT((#300318,#300323)); +#300318 = SURFACE_STYLE_USAGE(.BOTH.,#300319); +#300319 = SURFACE_SIDE_STYLE('',(#300320)); +#300320 = SURFACE_STYLE_FILL_AREA(#300321); +#300321 = FILL_AREA_STYLE('',(#300322)); +#300322 = FILL_AREA_STYLE_COLOUR('',#279624); +#300323 = CURVE_STYLE('',#300324,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300324 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300325 = OVER_RIDING_STYLED_ITEM('overriding color',(#300326),#29053, + #300316); +#300326 = PRESENTATION_STYLE_ASSIGNMENT((#300327,#300332)); +#300327 = SURFACE_STYLE_USAGE(.BOTH.,#300328); +#300328 = SURFACE_SIDE_STYLE('',(#300329)); +#300329 = SURFACE_STYLE_FILL_AREA(#300330); +#300330 = FILL_AREA_STYLE('',(#300331)); +#300331 = FILL_AREA_STYLE_COLOUR('',#280691); +#300332 = CURVE_STYLE('',#300333,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300333 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300334 = OVER_RIDING_STYLED_ITEM('overriding color',(#300335),#29069, + #300316); +#300335 = PRESENTATION_STYLE_ASSIGNMENT((#300336,#300341)); +#300336 = SURFACE_STYLE_USAGE(.BOTH.,#300337); +#300337 = SURFACE_SIDE_STYLE('',(#300338)); +#300338 = SURFACE_STYLE_FILL_AREA(#300339); +#300339 = FILL_AREA_STYLE('',(#300340)); +#300340 = FILL_AREA_STYLE_COLOUR('',#280691); +#300341 = CURVE_STYLE('',#300342,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300342 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300343 = STYLED_ITEM('color',(#300344),#29095); +#300344 = PRESENTATION_STYLE_ASSIGNMENT((#300345,#300350)); +#300345 = SURFACE_STYLE_USAGE(.BOTH.,#300346); +#300346 = SURFACE_SIDE_STYLE('',(#300347)); +#300347 = SURFACE_STYLE_FILL_AREA(#300348); +#300348 = FILL_AREA_STYLE('',(#300349)); +#300349 = FILL_AREA_STYLE_COLOUR('',#279624); +#300350 = CURVE_STYLE('',#300351,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300351 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300352 = STYLED_ITEM('color',(#300353),#29119); +#300353 = PRESENTATION_STYLE_ASSIGNMENT((#300354,#300359)); +#300354 = SURFACE_STYLE_USAGE(.BOTH.,#300355); +#300355 = SURFACE_SIDE_STYLE('',(#300356)); +#300356 = SURFACE_STYLE_FILL_AREA(#300357); +#300357 = FILL_AREA_STYLE('',(#300358)); +#300358 = FILL_AREA_STYLE_COLOUR('',#279624); +#300359 = CURVE_STYLE('',#300360,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300360 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300361 = OVER_RIDING_STYLED_ITEM('overriding color',(#300362),#29133, + #300352); +#300362 = PRESENTATION_STYLE_ASSIGNMENT((#300363,#300368)); +#300363 = SURFACE_STYLE_USAGE(.BOTH.,#300364); +#300364 = SURFACE_SIDE_STYLE('',(#300365)); +#300365 = SURFACE_STYLE_FILL_AREA(#300366); +#300366 = FILL_AREA_STYLE('',(#300367)); +#300367 = FILL_AREA_STYLE_COLOUR('',#280691); +#300368 = CURVE_STYLE('',#300369,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300369 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300370 = OVER_RIDING_STYLED_ITEM('overriding color',(#300371),#29149, + #300352); +#300371 = PRESENTATION_STYLE_ASSIGNMENT((#300372,#300377)); +#300372 = SURFACE_STYLE_USAGE(.BOTH.,#300373); +#300373 = SURFACE_SIDE_STYLE('',(#300374)); +#300374 = SURFACE_STYLE_FILL_AREA(#300375); +#300375 = FILL_AREA_STYLE('',(#300376)); +#300376 = FILL_AREA_STYLE_COLOUR('',#280691); +#300377 = CURVE_STYLE('',#300378,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300378 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300379 = STYLED_ITEM('color',(#300380),#29168); +#300380 = PRESENTATION_STYLE_ASSIGNMENT((#300381,#300386)); +#300381 = SURFACE_STYLE_USAGE(.BOTH.,#300382); +#300382 = SURFACE_SIDE_STYLE('',(#300383)); +#300383 = SURFACE_STYLE_FILL_AREA(#300384); +#300384 = FILL_AREA_STYLE('',(#300385)); +#300385 = FILL_AREA_STYLE_COLOUR('',#279624); +#300386 = CURVE_STYLE('',#300387,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300387 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300388 = STYLED_ITEM('color',(#300389),#29199); +#300389 = PRESENTATION_STYLE_ASSIGNMENT((#300390,#300395)); +#300390 = SURFACE_STYLE_USAGE(.BOTH.,#300391); +#300391 = SURFACE_SIDE_STYLE('',(#300392)); +#300392 = SURFACE_STYLE_FILL_AREA(#300393); +#300393 = FILL_AREA_STYLE('',(#300394)); +#300394 = FILL_AREA_STYLE_COLOUR('',#279624); +#300395 = CURVE_STYLE('',#300396,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300396 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300397 = OVER_RIDING_STYLED_ITEM('overriding color',(#300398),#29213, + #300388); +#300398 = PRESENTATION_STYLE_ASSIGNMENT((#300399,#300404)); +#300399 = SURFACE_STYLE_USAGE(.BOTH.,#300400); +#300400 = SURFACE_SIDE_STYLE('',(#300401)); +#300401 = SURFACE_STYLE_FILL_AREA(#300402); +#300402 = FILL_AREA_STYLE('',(#300403)); +#300403 = FILL_AREA_STYLE_COLOUR('',#280691); +#300404 = CURVE_STYLE('',#300405,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300405 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300406 = OVER_RIDING_STYLED_ITEM('overriding color',(#300407),#29229, + #300388); +#300407 = PRESENTATION_STYLE_ASSIGNMENT((#300408,#300413)); +#300408 = SURFACE_STYLE_USAGE(.BOTH.,#300409); +#300409 = SURFACE_SIDE_STYLE('',(#300410)); +#300410 = SURFACE_STYLE_FILL_AREA(#300411); +#300411 = FILL_AREA_STYLE('',(#300412)); +#300412 = FILL_AREA_STYLE_COLOUR('',#280691); +#300413 = CURVE_STYLE('',#300414,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300414 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300415 = STYLED_ITEM('color',(#300416),#29255); +#300416 = PRESENTATION_STYLE_ASSIGNMENT((#300417,#300422)); +#300417 = SURFACE_STYLE_USAGE(.BOTH.,#300418); +#300418 = SURFACE_SIDE_STYLE('',(#300419)); +#300419 = SURFACE_STYLE_FILL_AREA(#300420); +#300420 = FILL_AREA_STYLE('',(#300421)); +#300421 = FILL_AREA_STYLE_COLOUR('',#279624); +#300422 = CURVE_STYLE('',#300423,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300423 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300424 = STYLED_ITEM('color',(#300425),#29279); +#300425 = PRESENTATION_STYLE_ASSIGNMENT((#300426,#300431)); +#300426 = SURFACE_STYLE_USAGE(.BOTH.,#300427); +#300427 = SURFACE_SIDE_STYLE('',(#300428)); +#300428 = SURFACE_STYLE_FILL_AREA(#300429); +#300429 = FILL_AREA_STYLE('',(#300430)); +#300430 = FILL_AREA_STYLE_COLOUR('',#279624); +#300431 = CURVE_STYLE('',#300432,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300432 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300433 = OVER_RIDING_STYLED_ITEM('overriding color',(#300434),#29293, + #300424); +#300434 = PRESENTATION_STYLE_ASSIGNMENT((#300435,#300440)); +#300435 = SURFACE_STYLE_USAGE(.BOTH.,#300436); +#300436 = SURFACE_SIDE_STYLE('',(#300437)); +#300437 = SURFACE_STYLE_FILL_AREA(#300438); +#300438 = FILL_AREA_STYLE('',(#300439)); +#300439 = FILL_AREA_STYLE_COLOUR('',#280691); +#300440 = CURVE_STYLE('',#300441,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300441 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300442 = OVER_RIDING_STYLED_ITEM('overriding color',(#300443),#29309, + #300424); +#300443 = PRESENTATION_STYLE_ASSIGNMENT((#300444,#300449)); +#300444 = SURFACE_STYLE_USAGE(.BOTH.,#300445); +#300445 = SURFACE_SIDE_STYLE('',(#300446)); +#300446 = SURFACE_STYLE_FILL_AREA(#300447); +#300447 = FILL_AREA_STYLE('',(#300448)); +#300448 = FILL_AREA_STYLE_COLOUR('',#280691); +#300449 = CURVE_STYLE('',#300450,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300450 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300451 = STYLED_ITEM('color',(#300452),#29328); +#300452 = PRESENTATION_STYLE_ASSIGNMENT((#300453,#300458)); +#300453 = SURFACE_STYLE_USAGE(.BOTH.,#300454); +#300454 = SURFACE_SIDE_STYLE('',(#300455)); +#300455 = SURFACE_STYLE_FILL_AREA(#300456); +#300456 = FILL_AREA_STYLE('',(#300457)); +#300457 = FILL_AREA_STYLE_COLOUR('',#279624); +#300458 = CURVE_STYLE('',#300459,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300459 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300460 = STYLED_ITEM('color',(#300461),#29359); +#300461 = PRESENTATION_STYLE_ASSIGNMENT((#300462,#300467)); +#300462 = SURFACE_STYLE_USAGE(.BOTH.,#300463); +#300463 = SURFACE_SIDE_STYLE('',(#300464)); +#300464 = SURFACE_STYLE_FILL_AREA(#300465); +#300465 = FILL_AREA_STYLE('',(#300466)); +#300466 = FILL_AREA_STYLE_COLOUR('',#279624); +#300467 = CURVE_STYLE('',#300468,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300468 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300469 = OVER_RIDING_STYLED_ITEM('overriding color',(#300470),#29373, + #300460); +#300470 = PRESENTATION_STYLE_ASSIGNMENT((#300471,#300476)); +#300471 = SURFACE_STYLE_USAGE(.BOTH.,#300472); +#300472 = SURFACE_SIDE_STYLE('',(#300473)); +#300473 = SURFACE_STYLE_FILL_AREA(#300474); +#300474 = FILL_AREA_STYLE('',(#300475)); +#300475 = FILL_AREA_STYLE_COLOUR('',#280691); +#300476 = CURVE_STYLE('',#300477,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300477 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300478 = OVER_RIDING_STYLED_ITEM('overriding color',(#300479),#29389, + #300460); +#300479 = PRESENTATION_STYLE_ASSIGNMENT((#300480,#300485)); +#300480 = SURFACE_STYLE_USAGE(.BOTH.,#300481); +#300481 = SURFACE_SIDE_STYLE('',(#300482)); +#300482 = SURFACE_STYLE_FILL_AREA(#300483); +#300483 = FILL_AREA_STYLE('',(#300484)); +#300484 = FILL_AREA_STYLE_COLOUR('',#280691); +#300485 = CURVE_STYLE('',#300486,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300486 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300487 = STYLED_ITEM('color',(#300488),#29415); +#300488 = PRESENTATION_STYLE_ASSIGNMENT((#300489,#300494)); +#300489 = SURFACE_STYLE_USAGE(.BOTH.,#300490); +#300490 = SURFACE_SIDE_STYLE('',(#300491)); +#300491 = SURFACE_STYLE_FILL_AREA(#300492); +#300492 = FILL_AREA_STYLE('',(#300493)); +#300493 = FILL_AREA_STYLE_COLOUR('',#279624); +#300494 = CURVE_STYLE('',#300495,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300495 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300496 = STYLED_ITEM('color',(#300497),#29439); +#300497 = PRESENTATION_STYLE_ASSIGNMENT((#300498,#300503)); +#300498 = SURFACE_STYLE_USAGE(.BOTH.,#300499); +#300499 = SURFACE_SIDE_STYLE('',(#300500)); +#300500 = SURFACE_STYLE_FILL_AREA(#300501); +#300501 = FILL_AREA_STYLE('',(#300502)); +#300502 = FILL_AREA_STYLE_COLOUR('',#279624); +#300503 = CURVE_STYLE('',#300504,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300504 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300505 = OVER_RIDING_STYLED_ITEM('overriding color',(#300506),#29453, + #300496); +#300506 = PRESENTATION_STYLE_ASSIGNMENT((#300507,#300512)); +#300507 = SURFACE_STYLE_USAGE(.BOTH.,#300508); +#300508 = SURFACE_SIDE_STYLE('',(#300509)); +#300509 = SURFACE_STYLE_FILL_AREA(#300510); +#300510 = FILL_AREA_STYLE('',(#300511)); +#300511 = FILL_AREA_STYLE_COLOUR('',#280691); +#300512 = CURVE_STYLE('',#300513,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300513 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300514 = OVER_RIDING_STYLED_ITEM('overriding color',(#300515),#29469, + #300496); +#300515 = PRESENTATION_STYLE_ASSIGNMENT((#300516,#300521)); +#300516 = SURFACE_STYLE_USAGE(.BOTH.,#300517); +#300517 = SURFACE_SIDE_STYLE('',(#300518)); +#300518 = SURFACE_STYLE_FILL_AREA(#300519); +#300519 = FILL_AREA_STYLE('',(#300520)); +#300520 = FILL_AREA_STYLE_COLOUR('',#280691); +#300521 = CURVE_STYLE('',#300522,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300522 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300523 = STYLED_ITEM('color',(#300524),#29488); +#300524 = PRESENTATION_STYLE_ASSIGNMENT((#300525,#300530)); +#300525 = SURFACE_STYLE_USAGE(.BOTH.,#300526); +#300526 = SURFACE_SIDE_STYLE('',(#300527)); +#300527 = SURFACE_STYLE_FILL_AREA(#300528); +#300528 = FILL_AREA_STYLE('',(#300529)); +#300529 = FILL_AREA_STYLE_COLOUR('',#279624); +#300530 = CURVE_STYLE('',#300531,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300531 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300532 = STYLED_ITEM('color',(#300533),#29519); +#300533 = PRESENTATION_STYLE_ASSIGNMENT((#300534,#300539)); +#300534 = SURFACE_STYLE_USAGE(.BOTH.,#300535); +#300535 = SURFACE_SIDE_STYLE('',(#300536)); +#300536 = SURFACE_STYLE_FILL_AREA(#300537); +#300537 = FILL_AREA_STYLE('',(#300538)); +#300538 = FILL_AREA_STYLE_COLOUR('',#279624); +#300539 = CURVE_STYLE('',#300540,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300540 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300541 = OVER_RIDING_STYLED_ITEM('overriding color',(#300542),#29533, + #300532); +#300542 = PRESENTATION_STYLE_ASSIGNMENT((#300543,#300548)); +#300543 = SURFACE_STYLE_USAGE(.BOTH.,#300544); +#300544 = SURFACE_SIDE_STYLE('',(#300545)); +#300545 = SURFACE_STYLE_FILL_AREA(#300546); +#300546 = FILL_AREA_STYLE('',(#300547)); +#300547 = FILL_AREA_STYLE_COLOUR('',#280691); +#300548 = CURVE_STYLE('',#300549,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300549 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300550 = OVER_RIDING_STYLED_ITEM('overriding color',(#300551),#29549, + #300532); +#300551 = PRESENTATION_STYLE_ASSIGNMENT((#300552,#300557)); +#300552 = SURFACE_STYLE_USAGE(.BOTH.,#300553); +#300553 = SURFACE_SIDE_STYLE('',(#300554)); +#300554 = SURFACE_STYLE_FILL_AREA(#300555); +#300555 = FILL_AREA_STYLE('',(#300556)); +#300556 = FILL_AREA_STYLE_COLOUR('',#280691); +#300557 = CURVE_STYLE('',#300558,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300558 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300559 = STYLED_ITEM('color',(#300560),#29575); +#300560 = PRESENTATION_STYLE_ASSIGNMENT((#300561,#300566)); +#300561 = SURFACE_STYLE_USAGE(.BOTH.,#300562); +#300562 = SURFACE_SIDE_STYLE('',(#300563)); +#300563 = SURFACE_STYLE_FILL_AREA(#300564); +#300564 = FILL_AREA_STYLE('',(#300565)); +#300565 = FILL_AREA_STYLE_COLOUR('',#279624); +#300566 = CURVE_STYLE('',#300567,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300567 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300568 = STYLED_ITEM('color',(#300569),#29599); +#300569 = PRESENTATION_STYLE_ASSIGNMENT((#300570,#300575)); +#300570 = SURFACE_STYLE_USAGE(.BOTH.,#300571); +#300571 = SURFACE_SIDE_STYLE('',(#300572)); +#300572 = SURFACE_STYLE_FILL_AREA(#300573); +#300573 = FILL_AREA_STYLE('',(#300574)); +#300574 = FILL_AREA_STYLE_COLOUR('',#279624); +#300575 = CURVE_STYLE('',#300576,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300576 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300577 = OVER_RIDING_STYLED_ITEM('overriding color',(#300578),#29613, + #300568); +#300578 = PRESENTATION_STYLE_ASSIGNMENT((#300579,#300584)); +#300579 = SURFACE_STYLE_USAGE(.BOTH.,#300580); +#300580 = SURFACE_SIDE_STYLE('',(#300581)); +#300581 = SURFACE_STYLE_FILL_AREA(#300582); +#300582 = FILL_AREA_STYLE('',(#300583)); +#300583 = FILL_AREA_STYLE_COLOUR('',#280691); +#300584 = CURVE_STYLE('',#300585,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300585 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300586 = OVER_RIDING_STYLED_ITEM('overriding color',(#300587),#29629, + #300568); +#300587 = PRESENTATION_STYLE_ASSIGNMENT((#300588,#300593)); +#300588 = SURFACE_STYLE_USAGE(.BOTH.,#300589); +#300589 = SURFACE_SIDE_STYLE('',(#300590)); +#300590 = SURFACE_STYLE_FILL_AREA(#300591); +#300591 = FILL_AREA_STYLE('',(#300592)); +#300592 = FILL_AREA_STYLE_COLOUR('',#280691); +#300593 = CURVE_STYLE('',#300594,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300594 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300595 = STYLED_ITEM('color',(#300596),#29648); +#300596 = PRESENTATION_STYLE_ASSIGNMENT((#300597,#300602)); +#300597 = SURFACE_STYLE_USAGE(.BOTH.,#300598); +#300598 = SURFACE_SIDE_STYLE('',(#300599)); +#300599 = SURFACE_STYLE_FILL_AREA(#300600); +#300600 = FILL_AREA_STYLE('',(#300601)); +#300601 = FILL_AREA_STYLE_COLOUR('',#279624); +#300602 = CURVE_STYLE('',#300603,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300603 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300604 = STYLED_ITEM('color',(#300605),#29679); +#300605 = PRESENTATION_STYLE_ASSIGNMENT((#300606,#300611)); +#300606 = SURFACE_STYLE_USAGE(.BOTH.,#300607); +#300607 = SURFACE_SIDE_STYLE('',(#300608)); +#300608 = SURFACE_STYLE_FILL_AREA(#300609); +#300609 = FILL_AREA_STYLE('',(#300610)); +#300610 = FILL_AREA_STYLE_COLOUR('',#279624); +#300611 = CURVE_STYLE('',#300612,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300612 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300613 = OVER_RIDING_STYLED_ITEM('overriding color',(#300614),#29693, + #300604); +#300614 = PRESENTATION_STYLE_ASSIGNMENT((#300615,#300620)); +#300615 = SURFACE_STYLE_USAGE(.BOTH.,#300616); +#300616 = SURFACE_SIDE_STYLE('',(#300617)); +#300617 = SURFACE_STYLE_FILL_AREA(#300618); +#300618 = FILL_AREA_STYLE('',(#300619)); +#300619 = FILL_AREA_STYLE_COLOUR('',#280691); +#300620 = CURVE_STYLE('',#300621,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300621 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300622 = OVER_RIDING_STYLED_ITEM('overriding color',(#300623),#29709, + #300604); +#300623 = PRESENTATION_STYLE_ASSIGNMENT((#300624,#300629)); +#300624 = SURFACE_STYLE_USAGE(.BOTH.,#300625); +#300625 = SURFACE_SIDE_STYLE('',(#300626)); +#300626 = SURFACE_STYLE_FILL_AREA(#300627); +#300627 = FILL_AREA_STYLE('',(#300628)); +#300628 = FILL_AREA_STYLE_COLOUR('',#280691); +#300629 = CURVE_STYLE('',#300630,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300630 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300631 = STYLED_ITEM('color',(#300632),#29735); +#300632 = PRESENTATION_STYLE_ASSIGNMENT((#300633,#300638)); +#300633 = SURFACE_STYLE_USAGE(.BOTH.,#300634); +#300634 = SURFACE_SIDE_STYLE('',(#300635)); +#300635 = SURFACE_STYLE_FILL_AREA(#300636); +#300636 = FILL_AREA_STYLE('',(#300637)); +#300637 = FILL_AREA_STYLE_COLOUR('',#279624); +#300638 = CURVE_STYLE('',#300639,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300639 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300640 = STYLED_ITEM('color',(#300641),#29759); +#300641 = PRESENTATION_STYLE_ASSIGNMENT((#300642,#300647)); +#300642 = SURFACE_STYLE_USAGE(.BOTH.,#300643); +#300643 = SURFACE_SIDE_STYLE('',(#300644)); +#300644 = SURFACE_STYLE_FILL_AREA(#300645); +#300645 = FILL_AREA_STYLE('',(#300646)); +#300646 = FILL_AREA_STYLE_COLOUR('',#279624); +#300647 = CURVE_STYLE('',#300648,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300648 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300649 = OVER_RIDING_STYLED_ITEM('overriding color',(#300650),#29773, + #300640); +#300650 = PRESENTATION_STYLE_ASSIGNMENT((#300651,#300656)); +#300651 = SURFACE_STYLE_USAGE(.BOTH.,#300652); +#300652 = SURFACE_SIDE_STYLE('',(#300653)); +#300653 = SURFACE_STYLE_FILL_AREA(#300654); +#300654 = FILL_AREA_STYLE('',(#300655)); +#300655 = FILL_AREA_STYLE_COLOUR('',#280691); +#300656 = CURVE_STYLE('',#300657,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300657 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300658 = OVER_RIDING_STYLED_ITEM('overriding color',(#300659),#29789, + #300640); +#300659 = PRESENTATION_STYLE_ASSIGNMENT((#300660,#300665)); +#300660 = SURFACE_STYLE_USAGE(.BOTH.,#300661); +#300661 = SURFACE_SIDE_STYLE('',(#300662)); +#300662 = SURFACE_STYLE_FILL_AREA(#300663); +#300663 = FILL_AREA_STYLE('',(#300664)); +#300664 = FILL_AREA_STYLE_COLOUR('',#280691); +#300665 = CURVE_STYLE('',#300666,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300666 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300667 = STYLED_ITEM('color',(#300668),#29808); +#300668 = PRESENTATION_STYLE_ASSIGNMENT((#300669,#300674)); +#300669 = SURFACE_STYLE_USAGE(.BOTH.,#300670); +#300670 = SURFACE_SIDE_STYLE('',(#300671)); +#300671 = SURFACE_STYLE_FILL_AREA(#300672); +#300672 = FILL_AREA_STYLE('',(#300673)); +#300673 = FILL_AREA_STYLE_COLOUR('',#279624); +#300674 = CURVE_STYLE('',#300675,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300675 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300676 = STYLED_ITEM('color',(#300677),#29839); +#300677 = PRESENTATION_STYLE_ASSIGNMENT((#300678,#300683)); +#300678 = SURFACE_STYLE_USAGE(.BOTH.,#300679); +#300679 = SURFACE_SIDE_STYLE('',(#300680)); +#300680 = SURFACE_STYLE_FILL_AREA(#300681); +#300681 = FILL_AREA_STYLE('',(#300682)); +#300682 = FILL_AREA_STYLE_COLOUR('',#279624); +#300683 = CURVE_STYLE('',#300684,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300684 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300685 = OVER_RIDING_STYLED_ITEM('overriding color',(#300686),#29853, + #300676); +#300686 = PRESENTATION_STYLE_ASSIGNMENT((#300687,#300692)); +#300687 = SURFACE_STYLE_USAGE(.BOTH.,#300688); +#300688 = SURFACE_SIDE_STYLE('',(#300689)); +#300689 = SURFACE_STYLE_FILL_AREA(#300690); +#300690 = FILL_AREA_STYLE('',(#300691)); +#300691 = FILL_AREA_STYLE_COLOUR('',#280691); +#300692 = CURVE_STYLE('',#300693,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300693 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300694 = OVER_RIDING_STYLED_ITEM('overriding color',(#300695),#29869, + #300676); +#300695 = PRESENTATION_STYLE_ASSIGNMENT((#300696,#300701)); +#300696 = SURFACE_STYLE_USAGE(.BOTH.,#300697); +#300697 = SURFACE_SIDE_STYLE('',(#300698)); +#300698 = SURFACE_STYLE_FILL_AREA(#300699); +#300699 = FILL_AREA_STYLE('',(#300700)); +#300700 = FILL_AREA_STYLE_COLOUR('',#280691); +#300701 = CURVE_STYLE('',#300702,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300702 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300703 = STYLED_ITEM('color',(#300704),#29895); +#300704 = PRESENTATION_STYLE_ASSIGNMENT((#300705,#300710)); +#300705 = SURFACE_STYLE_USAGE(.BOTH.,#300706); +#300706 = SURFACE_SIDE_STYLE('',(#300707)); +#300707 = SURFACE_STYLE_FILL_AREA(#300708); +#300708 = FILL_AREA_STYLE('',(#300709)); +#300709 = FILL_AREA_STYLE_COLOUR('',#279624); +#300710 = CURVE_STYLE('',#300711,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300711 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300712 = STYLED_ITEM('color',(#300713),#29919); +#300713 = PRESENTATION_STYLE_ASSIGNMENT((#300714,#300719)); +#300714 = SURFACE_STYLE_USAGE(.BOTH.,#300715); +#300715 = SURFACE_SIDE_STYLE('',(#300716)); +#300716 = SURFACE_STYLE_FILL_AREA(#300717); +#300717 = FILL_AREA_STYLE('',(#300718)); +#300718 = FILL_AREA_STYLE_COLOUR('',#279624); +#300719 = CURVE_STYLE('',#300720,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300720 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300721 = OVER_RIDING_STYLED_ITEM('overriding color',(#300722),#29933, + #300712); +#300722 = PRESENTATION_STYLE_ASSIGNMENT((#300723,#300728)); +#300723 = SURFACE_STYLE_USAGE(.BOTH.,#300724); +#300724 = SURFACE_SIDE_STYLE('',(#300725)); +#300725 = SURFACE_STYLE_FILL_AREA(#300726); +#300726 = FILL_AREA_STYLE('',(#300727)); +#300727 = FILL_AREA_STYLE_COLOUR('',#280691); +#300728 = CURVE_STYLE('',#300729,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300729 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300730 = OVER_RIDING_STYLED_ITEM('overriding color',(#300731),#29949, + #300712); +#300731 = PRESENTATION_STYLE_ASSIGNMENT((#300732,#300737)); +#300732 = SURFACE_STYLE_USAGE(.BOTH.,#300733); +#300733 = SURFACE_SIDE_STYLE('',(#300734)); +#300734 = SURFACE_STYLE_FILL_AREA(#300735); +#300735 = FILL_AREA_STYLE('',(#300736)); +#300736 = FILL_AREA_STYLE_COLOUR('',#280691); +#300737 = CURVE_STYLE('',#300738,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300738 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300739 = STYLED_ITEM('color',(#300740),#29968); +#300740 = PRESENTATION_STYLE_ASSIGNMENT((#300741,#300746)); +#300741 = SURFACE_STYLE_USAGE(.BOTH.,#300742); +#300742 = SURFACE_SIDE_STYLE('',(#300743)); +#300743 = SURFACE_STYLE_FILL_AREA(#300744); +#300744 = FILL_AREA_STYLE('',(#300745)); +#300745 = FILL_AREA_STYLE_COLOUR('',#279624); +#300746 = CURVE_STYLE('',#300747,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300747 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300748 = STYLED_ITEM('color',(#300749),#29999); +#300749 = PRESENTATION_STYLE_ASSIGNMENT((#300750,#300755)); +#300750 = SURFACE_STYLE_USAGE(.BOTH.,#300751); +#300751 = SURFACE_SIDE_STYLE('',(#300752)); +#300752 = SURFACE_STYLE_FILL_AREA(#300753); +#300753 = FILL_AREA_STYLE('',(#300754)); +#300754 = FILL_AREA_STYLE_COLOUR('',#279624); +#300755 = CURVE_STYLE('',#300756,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300756 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300757 = OVER_RIDING_STYLED_ITEM('overriding color',(#300758),#30013, + #300748); +#300758 = PRESENTATION_STYLE_ASSIGNMENT((#300759,#300764)); +#300759 = SURFACE_STYLE_USAGE(.BOTH.,#300760); +#300760 = SURFACE_SIDE_STYLE('',(#300761)); +#300761 = SURFACE_STYLE_FILL_AREA(#300762); +#300762 = FILL_AREA_STYLE('',(#300763)); +#300763 = FILL_AREA_STYLE_COLOUR('',#280691); +#300764 = CURVE_STYLE('',#300765,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300765 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300766 = OVER_RIDING_STYLED_ITEM('overriding color',(#300767),#30029, + #300748); +#300767 = PRESENTATION_STYLE_ASSIGNMENT((#300768,#300773)); +#300768 = SURFACE_STYLE_USAGE(.BOTH.,#300769); +#300769 = SURFACE_SIDE_STYLE('',(#300770)); +#300770 = SURFACE_STYLE_FILL_AREA(#300771); +#300771 = FILL_AREA_STYLE('',(#300772)); +#300772 = FILL_AREA_STYLE_COLOUR('',#280691); +#300773 = CURVE_STYLE('',#300774,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300774 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300775 = STYLED_ITEM('color',(#300776),#30055); +#300776 = PRESENTATION_STYLE_ASSIGNMENT((#300777,#300782)); +#300777 = SURFACE_STYLE_USAGE(.BOTH.,#300778); +#300778 = SURFACE_SIDE_STYLE('',(#300779)); +#300779 = SURFACE_STYLE_FILL_AREA(#300780); +#300780 = FILL_AREA_STYLE('',(#300781)); +#300781 = FILL_AREA_STYLE_COLOUR('',#279624); +#300782 = CURVE_STYLE('',#300783,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300783 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300784 = STYLED_ITEM('color',(#300785),#30079); +#300785 = PRESENTATION_STYLE_ASSIGNMENT((#300786,#300791)); +#300786 = SURFACE_STYLE_USAGE(.BOTH.,#300787); +#300787 = SURFACE_SIDE_STYLE('',(#300788)); +#300788 = SURFACE_STYLE_FILL_AREA(#300789); +#300789 = FILL_AREA_STYLE('',(#300790)); +#300790 = FILL_AREA_STYLE_COLOUR('',#279624); +#300791 = CURVE_STYLE('',#300792,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300792 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300793 = OVER_RIDING_STYLED_ITEM('overriding color',(#300794),#30093, + #300784); +#300794 = PRESENTATION_STYLE_ASSIGNMENT((#300795,#300800)); +#300795 = SURFACE_STYLE_USAGE(.BOTH.,#300796); +#300796 = SURFACE_SIDE_STYLE('',(#300797)); +#300797 = SURFACE_STYLE_FILL_AREA(#300798); +#300798 = FILL_AREA_STYLE('',(#300799)); +#300799 = FILL_AREA_STYLE_COLOUR('',#280691); +#300800 = CURVE_STYLE('',#300801,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300801 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300802 = OVER_RIDING_STYLED_ITEM('overriding color',(#300803),#30109, + #300784); +#300803 = PRESENTATION_STYLE_ASSIGNMENT((#300804,#300809)); +#300804 = SURFACE_STYLE_USAGE(.BOTH.,#300805); +#300805 = SURFACE_SIDE_STYLE('',(#300806)); +#300806 = SURFACE_STYLE_FILL_AREA(#300807); +#300807 = FILL_AREA_STYLE('',(#300808)); +#300808 = FILL_AREA_STYLE_COLOUR('',#280691); +#300809 = CURVE_STYLE('',#300810,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300810 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300811 = STYLED_ITEM('color',(#300812),#30128); +#300812 = PRESENTATION_STYLE_ASSIGNMENT((#300813,#300818)); +#300813 = SURFACE_STYLE_USAGE(.BOTH.,#300814); +#300814 = SURFACE_SIDE_STYLE('',(#300815)); +#300815 = SURFACE_STYLE_FILL_AREA(#300816); +#300816 = FILL_AREA_STYLE('',(#300817)); +#300817 = FILL_AREA_STYLE_COLOUR('',#279624); +#300818 = CURVE_STYLE('',#300819,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300819 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300820 = STYLED_ITEM('color',(#300821),#30159); +#300821 = PRESENTATION_STYLE_ASSIGNMENT((#300822,#300827)); +#300822 = SURFACE_STYLE_USAGE(.BOTH.,#300823); +#300823 = SURFACE_SIDE_STYLE('',(#300824)); +#300824 = SURFACE_STYLE_FILL_AREA(#300825); +#300825 = FILL_AREA_STYLE('',(#300826)); +#300826 = FILL_AREA_STYLE_COLOUR('',#279624); +#300827 = CURVE_STYLE('',#300828,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300828 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300829 = OVER_RIDING_STYLED_ITEM('overriding color',(#300830),#30173, + #300820); +#300830 = PRESENTATION_STYLE_ASSIGNMENT((#300831,#300836)); +#300831 = SURFACE_STYLE_USAGE(.BOTH.,#300832); +#300832 = SURFACE_SIDE_STYLE('',(#300833)); +#300833 = SURFACE_STYLE_FILL_AREA(#300834); +#300834 = FILL_AREA_STYLE('',(#300835)); +#300835 = FILL_AREA_STYLE_COLOUR('',#280691); +#300836 = CURVE_STYLE('',#300837,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300837 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300838 = OVER_RIDING_STYLED_ITEM('overriding color',(#300839),#30189, + #300820); +#300839 = PRESENTATION_STYLE_ASSIGNMENT((#300840,#300845)); +#300840 = SURFACE_STYLE_USAGE(.BOTH.,#300841); +#300841 = SURFACE_SIDE_STYLE('',(#300842)); +#300842 = SURFACE_STYLE_FILL_AREA(#300843); +#300843 = FILL_AREA_STYLE('',(#300844)); +#300844 = FILL_AREA_STYLE_COLOUR('',#280691); +#300845 = CURVE_STYLE('',#300846,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300846 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300847 = STYLED_ITEM('color',(#300848),#30215); +#300848 = PRESENTATION_STYLE_ASSIGNMENT((#300849,#300854)); +#300849 = SURFACE_STYLE_USAGE(.BOTH.,#300850); +#300850 = SURFACE_SIDE_STYLE('',(#300851)); +#300851 = SURFACE_STYLE_FILL_AREA(#300852); +#300852 = FILL_AREA_STYLE('',(#300853)); +#300853 = FILL_AREA_STYLE_COLOUR('',#279624); +#300854 = CURVE_STYLE('',#300855,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300855 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300856 = STYLED_ITEM('color',(#300857),#30239); +#300857 = PRESENTATION_STYLE_ASSIGNMENT((#300858,#300863)); +#300858 = SURFACE_STYLE_USAGE(.BOTH.,#300859); +#300859 = SURFACE_SIDE_STYLE('',(#300860)); +#300860 = SURFACE_STYLE_FILL_AREA(#300861); +#300861 = FILL_AREA_STYLE('',(#300862)); +#300862 = FILL_AREA_STYLE_COLOUR('',#279624); +#300863 = CURVE_STYLE('',#300864,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#300864 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300865 = OVER_RIDING_STYLED_ITEM('overriding color',(#300866),#30253, + #300856); +#300866 = PRESENTATION_STYLE_ASSIGNMENT((#300867,#300872)); +#300867 = SURFACE_STYLE_USAGE(.BOTH.,#300868); +#300868 = SURFACE_SIDE_STYLE('',(#300869)); +#300869 = SURFACE_STYLE_FILL_AREA(#300870); +#300870 = FILL_AREA_STYLE('',(#300871)); +#300871 = FILL_AREA_STYLE_COLOUR('',#280691); +#300872 = CURVE_STYLE('',#300873,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300873 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300874 = OVER_RIDING_STYLED_ITEM('overriding color',(#300875),#30269, + #300856); +#300875 = PRESENTATION_STYLE_ASSIGNMENT((#300876,#300881)); +#300876 = SURFACE_STYLE_USAGE(.BOTH.,#300877); +#300877 = SURFACE_SIDE_STYLE('',(#300878)); +#300878 = SURFACE_STYLE_FILL_AREA(#300879); +#300879 = FILL_AREA_STYLE('',(#300880)); +#300880 = FILL_AREA_STYLE_COLOUR('',#280691); +#300881 = CURVE_STYLE('',#300882,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300882 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300883 = STYLED_ITEM('color',(#300884),#30288); +#300884 = PRESENTATION_STYLE_ASSIGNMENT((#300885,#300890)); +#300885 = SURFACE_STYLE_USAGE(.BOTH.,#300886); +#300886 = SURFACE_SIDE_STYLE('',(#300887)); +#300887 = SURFACE_STYLE_FILL_AREA(#300888); +#300888 = FILL_AREA_STYLE('',(#300889)); +#300889 = FILL_AREA_STYLE_COLOUR('',#280691); +#300890 = CURVE_STYLE('',#300891,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300891 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300892 = STYLED_ITEM('color',(#300893),#30305); +#300893 = PRESENTATION_STYLE_ASSIGNMENT((#300894,#300899)); +#300894 = SURFACE_STYLE_USAGE(.BOTH.,#300895); +#300895 = SURFACE_SIDE_STYLE('',(#300896)); +#300896 = SURFACE_STYLE_FILL_AREA(#300897); +#300897 = FILL_AREA_STYLE('',(#300898)); +#300898 = FILL_AREA_STYLE_COLOUR('',#280691); +#300899 = CURVE_STYLE('',#300900,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300900 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300901 = STYLED_ITEM('color',(#300902),#30322); +#300902 = PRESENTATION_STYLE_ASSIGNMENT((#300903,#300908)); +#300903 = SURFACE_STYLE_USAGE(.BOTH.,#300904); +#300904 = SURFACE_SIDE_STYLE('',(#300905)); +#300905 = SURFACE_STYLE_FILL_AREA(#300906); +#300906 = FILL_AREA_STYLE('',(#300907)); +#300907 = FILL_AREA_STYLE_COLOUR('',#280691); +#300908 = CURVE_STYLE('',#300909,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300909 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300910 = STYLED_ITEM('color',(#300911),#30339); +#300911 = PRESENTATION_STYLE_ASSIGNMENT((#300912,#300917)); +#300912 = SURFACE_STYLE_USAGE(.BOTH.,#300913); +#300913 = SURFACE_SIDE_STYLE('',(#300914)); +#300914 = SURFACE_STYLE_FILL_AREA(#300915); +#300915 = FILL_AREA_STYLE('',(#300916)); +#300916 = FILL_AREA_STYLE_COLOUR('',#280691); +#300917 = CURVE_STYLE('',#300918,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300918 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300919 = STYLED_ITEM('color',(#300920),#30356); +#300920 = PRESENTATION_STYLE_ASSIGNMENT((#300921,#300926)); +#300921 = SURFACE_STYLE_USAGE(.BOTH.,#300922); +#300922 = SURFACE_SIDE_STYLE('',(#300923)); +#300923 = SURFACE_STYLE_FILL_AREA(#300924); +#300924 = FILL_AREA_STYLE('',(#300925)); +#300925 = FILL_AREA_STYLE_COLOUR('',#280691); +#300926 = CURVE_STYLE('',#300927,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300927 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300928 = STYLED_ITEM('color',(#300929),#30368); +#300929 = PRESENTATION_STYLE_ASSIGNMENT((#300930,#300935)); +#300930 = SURFACE_STYLE_USAGE(.BOTH.,#300931); +#300931 = SURFACE_SIDE_STYLE('',(#300932)); +#300932 = SURFACE_STYLE_FILL_AREA(#300933); +#300933 = FILL_AREA_STYLE('',(#300934)); +#300934 = FILL_AREA_STYLE_COLOUR('',#280691); +#300935 = CURVE_STYLE('',#300936,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300936 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300937 = STYLED_ITEM('color',(#300938),#30385); +#300938 = PRESENTATION_STYLE_ASSIGNMENT((#300939,#300944)); +#300939 = SURFACE_STYLE_USAGE(.BOTH.,#300940); +#300940 = SURFACE_SIDE_STYLE('',(#300941)); +#300941 = SURFACE_STYLE_FILL_AREA(#300942); +#300942 = FILL_AREA_STYLE('',(#300943)); +#300943 = FILL_AREA_STYLE_COLOUR('',#280691); +#300944 = CURVE_STYLE('',#300945,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300945 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300946 = STYLED_ITEM('color',(#300947),#30402); +#300947 = PRESENTATION_STYLE_ASSIGNMENT((#300948,#300953)); +#300948 = SURFACE_STYLE_USAGE(.BOTH.,#300949); +#300949 = SURFACE_SIDE_STYLE('',(#300950)); +#300950 = SURFACE_STYLE_FILL_AREA(#300951); +#300951 = FILL_AREA_STYLE('',(#300952)); +#300952 = FILL_AREA_STYLE_COLOUR('',#280691); +#300953 = CURVE_STYLE('',#300954,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300954 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300955 = STYLED_ITEM('color',(#300956),#30419); +#300956 = PRESENTATION_STYLE_ASSIGNMENT((#300957,#300962)); +#300957 = SURFACE_STYLE_USAGE(.BOTH.,#300958); +#300958 = SURFACE_SIDE_STYLE('',(#300959)); +#300959 = SURFACE_STYLE_FILL_AREA(#300960); +#300960 = FILL_AREA_STYLE('',(#300961)); +#300961 = FILL_AREA_STYLE_COLOUR('',#280691); +#300962 = CURVE_STYLE('',#300963,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300963 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300964 = STYLED_ITEM('color',(#300965),#30436); +#300965 = PRESENTATION_STYLE_ASSIGNMENT((#300966,#300971)); +#300966 = SURFACE_STYLE_USAGE(.BOTH.,#300967); +#300967 = SURFACE_SIDE_STYLE('',(#300968)); +#300968 = SURFACE_STYLE_FILL_AREA(#300969); +#300969 = FILL_AREA_STYLE('',(#300970)); +#300970 = FILL_AREA_STYLE_COLOUR('',#280691); +#300971 = CURVE_STYLE('',#300972,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300972 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300973 = STYLED_ITEM('color',(#300974),#30448); +#300974 = PRESENTATION_STYLE_ASSIGNMENT((#300975,#300980)); +#300975 = SURFACE_STYLE_USAGE(.BOTH.,#300976); +#300976 = SURFACE_SIDE_STYLE('',(#300977)); +#300977 = SURFACE_STYLE_FILL_AREA(#300978); +#300978 = FILL_AREA_STYLE('',(#300979)); +#300979 = FILL_AREA_STYLE_COLOUR('',#280691); +#300980 = CURVE_STYLE('',#300981,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300981 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300982 = STYLED_ITEM('color',(#300983),#30465); +#300983 = PRESENTATION_STYLE_ASSIGNMENT((#300984,#300989)); +#300984 = SURFACE_STYLE_USAGE(.BOTH.,#300985); +#300985 = SURFACE_SIDE_STYLE('',(#300986)); +#300986 = SURFACE_STYLE_FILL_AREA(#300987); +#300987 = FILL_AREA_STYLE('',(#300988)); +#300988 = FILL_AREA_STYLE_COLOUR('',#280691); +#300989 = CURVE_STYLE('',#300990,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300990 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300991 = STYLED_ITEM('color',(#300992),#30482); +#300992 = PRESENTATION_STYLE_ASSIGNMENT((#300993,#300998)); +#300993 = SURFACE_STYLE_USAGE(.BOTH.,#300994); +#300994 = SURFACE_SIDE_STYLE('',(#300995)); +#300995 = SURFACE_STYLE_FILL_AREA(#300996); +#300996 = FILL_AREA_STYLE('',(#300997)); +#300997 = FILL_AREA_STYLE_COLOUR('',#280691); +#300998 = CURVE_STYLE('',#300999,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#300999 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301000 = STYLED_ITEM('color',(#301001),#30499); +#301001 = PRESENTATION_STYLE_ASSIGNMENT((#301002,#301007)); +#301002 = SURFACE_STYLE_USAGE(.BOTH.,#301003); +#301003 = SURFACE_SIDE_STYLE('',(#301004)); +#301004 = SURFACE_STYLE_FILL_AREA(#301005); +#301005 = FILL_AREA_STYLE('',(#301006)); +#301006 = FILL_AREA_STYLE_COLOUR('',#280691); +#301007 = CURVE_STYLE('',#301008,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301008 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301009 = STYLED_ITEM('color',(#301010),#30516); +#301010 = PRESENTATION_STYLE_ASSIGNMENT((#301011,#301016)); +#301011 = SURFACE_STYLE_USAGE(.BOTH.,#301012); +#301012 = SURFACE_SIDE_STYLE('',(#301013)); +#301013 = SURFACE_STYLE_FILL_AREA(#301014); +#301014 = FILL_AREA_STYLE('',(#301015)); +#301015 = FILL_AREA_STYLE_COLOUR('',#280691); +#301016 = CURVE_STYLE('',#301017,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301017 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301018 = STYLED_ITEM('color',(#301019),#30528); +#301019 = PRESENTATION_STYLE_ASSIGNMENT((#301020,#301025)); +#301020 = SURFACE_STYLE_USAGE(.BOTH.,#301021); +#301021 = SURFACE_SIDE_STYLE('',(#301022)); +#301022 = SURFACE_STYLE_FILL_AREA(#301023); +#301023 = FILL_AREA_STYLE('',(#301024)); +#301024 = FILL_AREA_STYLE_COLOUR('',#280691); +#301025 = CURVE_STYLE('',#301026,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301026 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301027 = STYLED_ITEM('color',(#301028),#30545); +#301028 = PRESENTATION_STYLE_ASSIGNMENT((#301029,#301034)); +#301029 = SURFACE_STYLE_USAGE(.BOTH.,#301030); +#301030 = SURFACE_SIDE_STYLE('',(#301031)); +#301031 = SURFACE_STYLE_FILL_AREA(#301032); +#301032 = FILL_AREA_STYLE('',(#301033)); +#301033 = FILL_AREA_STYLE_COLOUR('',#280691); +#301034 = CURVE_STYLE('',#301035,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301035 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301036 = STYLED_ITEM('color',(#301037),#30562); +#301037 = PRESENTATION_STYLE_ASSIGNMENT((#301038,#301043)); +#301038 = SURFACE_STYLE_USAGE(.BOTH.,#301039); +#301039 = SURFACE_SIDE_STYLE('',(#301040)); +#301040 = SURFACE_STYLE_FILL_AREA(#301041); +#301041 = FILL_AREA_STYLE('',(#301042)); +#301042 = FILL_AREA_STYLE_COLOUR('',#280691); +#301043 = CURVE_STYLE('',#301044,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301044 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301045 = STYLED_ITEM('color',(#301046),#30579); +#301046 = PRESENTATION_STYLE_ASSIGNMENT((#301047,#301052)); +#301047 = SURFACE_STYLE_USAGE(.BOTH.,#301048); +#301048 = SURFACE_SIDE_STYLE('',(#301049)); +#301049 = SURFACE_STYLE_FILL_AREA(#301050); +#301050 = FILL_AREA_STYLE('',(#301051)); +#301051 = FILL_AREA_STYLE_COLOUR('',#280691); +#301052 = CURVE_STYLE('',#301053,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301053 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301054 = STYLED_ITEM('color',(#301055),#30596); +#301055 = PRESENTATION_STYLE_ASSIGNMENT((#301056,#301061)); +#301056 = SURFACE_STYLE_USAGE(.BOTH.,#301057); +#301057 = SURFACE_SIDE_STYLE('',(#301058)); +#301058 = SURFACE_STYLE_FILL_AREA(#301059); +#301059 = FILL_AREA_STYLE('',(#301060)); +#301060 = FILL_AREA_STYLE_COLOUR('',#280691); +#301061 = CURVE_STYLE('',#301062,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301062 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301063 = STYLED_ITEM('color',(#301064),#30608); +#301064 = PRESENTATION_STYLE_ASSIGNMENT((#301065,#301070)); +#301065 = SURFACE_STYLE_USAGE(.BOTH.,#301066); +#301066 = SURFACE_SIDE_STYLE('',(#301067)); +#301067 = SURFACE_STYLE_FILL_AREA(#301068); +#301068 = FILL_AREA_STYLE('',(#301069)); +#301069 = FILL_AREA_STYLE_COLOUR('',#280691); +#301070 = CURVE_STYLE('',#301071,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301071 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301072 = STYLED_ITEM('color',(#301073),#30625); +#301073 = PRESENTATION_STYLE_ASSIGNMENT((#301074,#301079)); +#301074 = SURFACE_STYLE_USAGE(.BOTH.,#301075); +#301075 = SURFACE_SIDE_STYLE('',(#301076)); +#301076 = SURFACE_STYLE_FILL_AREA(#301077); +#301077 = FILL_AREA_STYLE('',(#301078)); +#301078 = FILL_AREA_STYLE_COLOUR('',#280691); +#301079 = CURVE_STYLE('',#301080,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301080 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301081 = STYLED_ITEM('color',(#301082),#30642); +#301082 = PRESENTATION_STYLE_ASSIGNMENT((#301083,#301088)); +#301083 = SURFACE_STYLE_USAGE(.BOTH.,#301084); +#301084 = SURFACE_SIDE_STYLE('',(#301085)); +#301085 = SURFACE_STYLE_FILL_AREA(#301086); +#301086 = FILL_AREA_STYLE('',(#301087)); +#301087 = FILL_AREA_STYLE_COLOUR('',#280691); +#301088 = CURVE_STYLE('',#301089,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301089 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301090 = STYLED_ITEM('color',(#301091),#30659); +#301091 = PRESENTATION_STYLE_ASSIGNMENT((#301092,#301097)); +#301092 = SURFACE_STYLE_USAGE(.BOTH.,#301093); +#301093 = SURFACE_SIDE_STYLE('',(#301094)); +#301094 = SURFACE_STYLE_FILL_AREA(#301095); +#301095 = FILL_AREA_STYLE('',(#301096)); +#301096 = FILL_AREA_STYLE_COLOUR('',#280691); +#301097 = CURVE_STYLE('',#301098,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301098 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301099 = STYLED_ITEM('color',(#301100),#30676); +#301100 = PRESENTATION_STYLE_ASSIGNMENT((#301101,#301106)); +#301101 = SURFACE_STYLE_USAGE(.BOTH.,#301102); +#301102 = SURFACE_SIDE_STYLE('',(#301103)); +#301103 = SURFACE_STYLE_FILL_AREA(#301104); +#301104 = FILL_AREA_STYLE('',(#301105)); +#301105 = FILL_AREA_STYLE_COLOUR('',#280691); +#301106 = CURVE_STYLE('',#301107,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301107 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301108 = STYLED_ITEM('color',(#301109),#30688); +#301109 = PRESENTATION_STYLE_ASSIGNMENT((#301110,#301115)); +#301110 = SURFACE_STYLE_USAGE(.BOTH.,#301111); +#301111 = SURFACE_SIDE_STYLE('',(#301112)); +#301112 = SURFACE_STYLE_FILL_AREA(#301113); +#301113 = FILL_AREA_STYLE('',(#301114)); +#301114 = FILL_AREA_STYLE_COLOUR('',#280691); +#301115 = CURVE_STYLE('',#301116,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301116 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301117 = STYLED_ITEM('color',(#301118),#30705); +#301118 = PRESENTATION_STYLE_ASSIGNMENT((#301119,#301124)); +#301119 = SURFACE_STYLE_USAGE(.BOTH.,#301120); +#301120 = SURFACE_SIDE_STYLE('',(#301121)); +#301121 = SURFACE_STYLE_FILL_AREA(#301122); +#301122 = FILL_AREA_STYLE('',(#301123)); +#301123 = FILL_AREA_STYLE_COLOUR('',#280691); +#301124 = CURVE_STYLE('',#301125,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301125 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301126 = STYLED_ITEM('color',(#301127),#30722); +#301127 = PRESENTATION_STYLE_ASSIGNMENT((#301128,#301133)); +#301128 = SURFACE_STYLE_USAGE(.BOTH.,#301129); +#301129 = SURFACE_SIDE_STYLE('',(#301130)); +#301130 = SURFACE_STYLE_FILL_AREA(#301131); +#301131 = FILL_AREA_STYLE('',(#301132)); +#301132 = FILL_AREA_STYLE_COLOUR('',#280691); +#301133 = CURVE_STYLE('',#301134,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301134 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301135 = STYLED_ITEM('color',(#301136),#30739); +#301136 = PRESENTATION_STYLE_ASSIGNMENT((#301137,#301142)); +#301137 = SURFACE_STYLE_USAGE(.BOTH.,#301138); +#301138 = SURFACE_SIDE_STYLE('',(#301139)); +#301139 = SURFACE_STYLE_FILL_AREA(#301140); +#301140 = FILL_AREA_STYLE('',(#301141)); +#301141 = FILL_AREA_STYLE_COLOUR('',#280691); +#301142 = CURVE_STYLE('',#301143,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301143 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301144 = STYLED_ITEM('color',(#301145),#30756); +#301145 = PRESENTATION_STYLE_ASSIGNMENT((#301146,#301151)); +#301146 = SURFACE_STYLE_USAGE(.BOTH.,#301147); +#301147 = SURFACE_SIDE_STYLE('',(#301148)); +#301148 = SURFACE_STYLE_FILL_AREA(#301149); +#301149 = FILL_AREA_STYLE('',(#301150)); +#301150 = FILL_AREA_STYLE_COLOUR('',#280691); +#301151 = CURVE_STYLE('',#301152,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301152 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301153 = STYLED_ITEM('color',(#301154),#30768); +#301154 = PRESENTATION_STYLE_ASSIGNMENT((#301155,#301160)); +#301155 = SURFACE_STYLE_USAGE(.BOTH.,#301156); +#301156 = SURFACE_SIDE_STYLE('',(#301157)); +#301157 = SURFACE_STYLE_FILL_AREA(#301158); +#301158 = FILL_AREA_STYLE('',(#301159)); +#301159 = FILL_AREA_STYLE_COLOUR('',#280691); +#301160 = CURVE_STYLE('',#301161,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301161 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301162 = STYLED_ITEM('color',(#301163),#30785); +#301163 = PRESENTATION_STYLE_ASSIGNMENT((#301164,#301169)); +#301164 = SURFACE_STYLE_USAGE(.BOTH.,#301165); +#301165 = SURFACE_SIDE_STYLE('',(#301166)); +#301166 = SURFACE_STYLE_FILL_AREA(#301167); +#301167 = FILL_AREA_STYLE('',(#301168)); +#301168 = FILL_AREA_STYLE_COLOUR('',#280691); +#301169 = CURVE_STYLE('',#301170,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301170 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301171 = STYLED_ITEM('color',(#301172),#30802); +#301172 = PRESENTATION_STYLE_ASSIGNMENT((#301173,#301178)); +#301173 = SURFACE_STYLE_USAGE(.BOTH.,#301174); +#301174 = SURFACE_SIDE_STYLE('',(#301175)); +#301175 = SURFACE_STYLE_FILL_AREA(#301176); +#301176 = FILL_AREA_STYLE('',(#301177)); +#301177 = FILL_AREA_STYLE_COLOUR('',#280691); +#301178 = CURVE_STYLE('',#301179,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301179 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301180 = STYLED_ITEM('color',(#301181),#30819); +#301181 = PRESENTATION_STYLE_ASSIGNMENT((#301182,#301187)); +#301182 = SURFACE_STYLE_USAGE(.BOTH.,#301183); +#301183 = SURFACE_SIDE_STYLE('',(#301184)); +#301184 = SURFACE_STYLE_FILL_AREA(#301185); +#301185 = FILL_AREA_STYLE('',(#301186)); +#301186 = FILL_AREA_STYLE_COLOUR('',#280691); +#301187 = CURVE_STYLE('',#301188,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301188 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301189 = STYLED_ITEM('color',(#301190),#30836); +#301190 = PRESENTATION_STYLE_ASSIGNMENT((#301191,#301196)); +#301191 = SURFACE_STYLE_USAGE(.BOTH.,#301192); +#301192 = SURFACE_SIDE_STYLE('',(#301193)); +#301193 = SURFACE_STYLE_FILL_AREA(#301194); +#301194 = FILL_AREA_STYLE('',(#301195)); +#301195 = FILL_AREA_STYLE_COLOUR('',#280691); +#301196 = CURVE_STYLE('',#301197,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301197 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301198 = STYLED_ITEM('color',(#301199),#30848); +#301199 = PRESENTATION_STYLE_ASSIGNMENT((#301200,#301205)); +#301200 = SURFACE_STYLE_USAGE(.BOTH.,#301201); +#301201 = SURFACE_SIDE_STYLE('',(#301202)); +#301202 = SURFACE_STYLE_FILL_AREA(#301203); +#301203 = FILL_AREA_STYLE('',(#301204)); +#301204 = FILL_AREA_STYLE_COLOUR('',#280691); +#301205 = CURVE_STYLE('',#301206,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301206 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301207 = STYLED_ITEM('color',(#301208),#30865); +#301208 = PRESENTATION_STYLE_ASSIGNMENT((#301209,#301214)); +#301209 = SURFACE_STYLE_USAGE(.BOTH.,#301210); +#301210 = SURFACE_SIDE_STYLE('',(#301211)); +#301211 = SURFACE_STYLE_FILL_AREA(#301212); +#301212 = FILL_AREA_STYLE('',(#301213)); +#301213 = FILL_AREA_STYLE_COLOUR('',#280691); +#301214 = CURVE_STYLE('',#301215,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301215 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301216 = STYLED_ITEM('color',(#301217),#30882); +#301217 = PRESENTATION_STYLE_ASSIGNMENT((#301218,#301223)); +#301218 = SURFACE_STYLE_USAGE(.BOTH.,#301219); +#301219 = SURFACE_SIDE_STYLE('',(#301220)); +#301220 = SURFACE_STYLE_FILL_AREA(#301221); +#301221 = FILL_AREA_STYLE('',(#301222)); +#301222 = FILL_AREA_STYLE_COLOUR('',#280691); +#301223 = CURVE_STYLE('',#301224,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301224 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301225 = STYLED_ITEM('color',(#301226),#30899); +#301226 = PRESENTATION_STYLE_ASSIGNMENT((#301227,#301232)); +#301227 = SURFACE_STYLE_USAGE(.BOTH.,#301228); +#301228 = SURFACE_SIDE_STYLE('',(#301229)); +#301229 = SURFACE_STYLE_FILL_AREA(#301230); +#301230 = FILL_AREA_STYLE('',(#301231)); +#301231 = FILL_AREA_STYLE_COLOUR('',#280691); +#301232 = CURVE_STYLE('',#301233,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301233 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301234 = STYLED_ITEM('color',(#301235),#30916); +#301235 = PRESENTATION_STYLE_ASSIGNMENT((#301236,#301241)); +#301236 = SURFACE_STYLE_USAGE(.BOTH.,#301237); +#301237 = SURFACE_SIDE_STYLE('',(#301238)); +#301238 = SURFACE_STYLE_FILL_AREA(#301239); +#301239 = FILL_AREA_STYLE('',(#301240)); +#301240 = FILL_AREA_STYLE_COLOUR('',#280691); +#301241 = CURVE_STYLE('',#301242,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301242 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301243 = STYLED_ITEM('color',(#301244),#30928); +#301244 = PRESENTATION_STYLE_ASSIGNMENT((#301245,#301250)); +#301245 = SURFACE_STYLE_USAGE(.BOTH.,#301246); +#301246 = SURFACE_SIDE_STYLE('',(#301247)); +#301247 = SURFACE_STYLE_FILL_AREA(#301248); +#301248 = FILL_AREA_STYLE('',(#301249)); +#301249 = FILL_AREA_STYLE_COLOUR('',#280691); +#301250 = CURVE_STYLE('',#301251,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301251 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301252 = STYLED_ITEM('color',(#301253),#30945); +#301253 = PRESENTATION_STYLE_ASSIGNMENT((#301254,#301259)); +#301254 = SURFACE_STYLE_USAGE(.BOTH.,#301255); +#301255 = SURFACE_SIDE_STYLE('',(#301256)); +#301256 = SURFACE_STYLE_FILL_AREA(#301257); +#301257 = FILL_AREA_STYLE('',(#301258)); +#301258 = FILL_AREA_STYLE_COLOUR('',#280691); +#301259 = CURVE_STYLE('',#301260,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301260 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301261 = STYLED_ITEM('color',(#301262),#30962); +#301262 = PRESENTATION_STYLE_ASSIGNMENT((#301263,#301268)); +#301263 = SURFACE_STYLE_USAGE(.BOTH.,#301264); +#301264 = SURFACE_SIDE_STYLE('',(#301265)); +#301265 = SURFACE_STYLE_FILL_AREA(#301266); +#301266 = FILL_AREA_STYLE('',(#301267)); +#301267 = FILL_AREA_STYLE_COLOUR('',#280691); +#301268 = CURVE_STYLE('',#301269,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301269 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301270 = STYLED_ITEM('color',(#301271),#30979); +#301271 = PRESENTATION_STYLE_ASSIGNMENT((#301272,#301277)); +#301272 = SURFACE_STYLE_USAGE(.BOTH.,#301273); +#301273 = SURFACE_SIDE_STYLE('',(#301274)); +#301274 = SURFACE_STYLE_FILL_AREA(#301275); +#301275 = FILL_AREA_STYLE('',(#301276)); +#301276 = FILL_AREA_STYLE_COLOUR('',#280691); +#301277 = CURVE_STYLE('',#301278,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301278 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301279 = STYLED_ITEM('color',(#301280),#30996); +#301280 = PRESENTATION_STYLE_ASSIGNMENT((#301281,#301286)); +#301281 = SURFACE_STYLE_USAGE(.BOTH.,#301282); +#301282 = SURFACE_SIDE_STYLE('',(#301283)); +#301283 = SURFACE_STYLE_FILL_AREA(#301284); +#301284 = FILL_AREA_STYLE('',(#301285)); +#301285 = FILL_AREA_STYLE_COLOUR('',#280691); +#301286 = CURVE_STYLE('',#301287,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301287 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301288 = STYLED_ITEM('color',(#301289),#31008); +#301289 = PRESENTATION_STYLE_ASSIGNMENT((#301290,#301295)); +#301290 = SURFACE_STYLE_USAGE(.BOTH.,#301291); +#301291 = SURFACE_SIDE_STYLE('',(#301292)); +#301292 = SURFACE_STYLE_FILL_AREA(#301293); +#301293 = FILL_AREA_STYLE('',(#301294)); +#301294 = FILL_AREA_STYLE_COLOUR('',#280691); +#301295 = CURVE_STYLE('',#301296,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301296 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301297 = STYLED_ITEM('color',(#301298),#31025); +#301298 = PRESENTATION_STYLE_ASSIGNMENT((#301299,#301304)); +#301299 = SURFACE_STYLE_USAGE(.BOTH.,#301300); +#301300 = SURFACE_SIDE_STYLE('',(#301301)); +#301301 = SURFACE_STYLE_FILL_AREA(#301302); +#301302 = FILL_AREA_STYLE('',(#301303)); +#301303 = FILL_AREA_STYLE_COLOUR('',#280691); +#301304 = CURVE_STYLE('',#301305,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301305 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301306 = STYLED_ITEM('color',(#301307),#31042); +#301307 = PRESENTATION_STYLE_ASSIGNMENT((#301308,#301313)); +#301308 = SURFACE_STYLE_USAGE(.BOTH.,#301309); +#301309 = SURFACE_SIDE_STYLE('',(#301310)); +#301310 = SURFACE_STYLE_FILL_AREA(#301311); +#301311 = FILL_AREA_STYLE('',(#301312)); +#301312 = FILL_AREA_STYLE_COLOUR('',#280691); +#301313 = CURVE_STYLE('',#301314,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301314 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301315 = STYLED_ITEM('color',(#301316),#31059); +#301316 = PRESENTATION_STYLE_ASSIGNMENT((#301317,#301322)); +#301317 = SURFACE_STYLE_USAGE(.BOTH.,#301318); +#301318 = SURFACE_SIDE_STYLE('',(#301319)); +#301319 = SURFACE_STYLE_FILL_AREA(#301320); +#301320 = FILL_AREA_STYLE('',(#301321)); +#301321 = FILL_AREA_STYLE_COLOUR('',#280691); +#301322 = CURVE_STYLE('',#301323,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301323 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301324 = STYLED_ITEM('color',(#301325),#31076); +#301325 = PRESENTATION_STYLE_ASSIGNMENT((#301326,#301331)); +#301326 = SURFACE_STYLE_USAGE(.BOTH.,#301327); +#301327 = SURFACE_SIDE_STYLE('',(#301328)); +#301328 = SURFACE_STYLE_FILL_AREA(#301329); +#301329 = FILL_AREA_STYLE('',(#301330)); +#301330 = FILL_AREA_STYLE_COLOUR('',#280691); +#301331 = CURVE_STYLE('',#301332,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301332 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301333 = STYLED_ITEM('color',(#301334),#31088); +#301334 = PRESENTATION_STYLE_ASSIGNMENT((#301335,#301340)); +#301335 = SURFACE_STYLE_USAGE(.BOTH.,#301336); +#301336 = SURFACE_SIDE_STYLE('',(#301337)); +#301337 = SURFACE_STYLE_FILL_AREA(#301338); +#301338 = FILL_AREA_STYLE('',(#301339)); +#301339 = FILL_AREA_STYLE_COLOUR('',#280691); +#301340 = CURVE_STYLE('',#301341,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301341 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301342 = STYLED_ITEM('color',(#301343),#31105); +#301343 = PRESENTATION_STYLE_ASSIGNMENT((#301344,#301349)); +#301344 = SURFACE_STYLE_USAGE(.BOTH.,#301345); +#301345 = SURFACE_SIDE_STYLE('',(#301346)); +#301346 = SURFACE_STYLE_FILL_AREA(#301347); +#301347 = FILL_AREA_STYLE('',(#301348)); +#301348 = FILL_AREA_STYLE_COLOUR('',#280691); +#301349 = CURVE_STYLE('',#301350,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301350 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301351 = STYLED_ITEM('color',(#301352),#31122); +#301352 = PRESENTATION_STYLE_ASSIGNMENT((#301353,#301358)); +#301353 = SURFACE_STYLE_USAGE(.BOTH.,#301354); +#301354 = SURFACE_SIDE_STYLE('',(#301355)); +#301355 = SURFACE_STYLE_FILL_AREA(#301356); +#301356 = FILL_AREA_STYLE('',(#301357)); +#301357 = FILL_AREA_STYLE_COLOUR('',#280691); +#301358 = CURVE_STYLE('',#301359,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301359 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301360 = STYLED_ITEM('color',(#301361),#31139); +#301361 = PRESENTATION_STYLE_ASSIGNMENT((#301362,#301367)); +#301362 = SURFACE_STYLE_USAGE(.BOTH.,#301363); +#301363 = SURFACE_SIDE_STYLE('',(#301364)); +#301364 = SURFACE_STYLE_FILL_AREA(#301365); +#301365 = FILL_AREA_STYLE('',(#301366)); +#301366 = FILL_AREA_STYLE_COLOUR('',#280691); +#301367 = CURVE_STYLE('',#301368,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301368 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301369 = STYLED_ITEM('color',(#301370),#31156); +#301370 = PRESENTATION_STYLE_ASSIGNMENT((#301371,#301376)); +#301371 = SURFACE_STYLE_USAGE(.BOTH.,#301372); +#301372 = SURFACE_SIDE_STYLE('',(#301373)); +#301373 = SURFACE_STYLE_FILL_AREA(#301374); +#301374 = FILL_AREA_STYLE('',(#301375)); +#301375 = FILL_AREA_STYLE_COLOUR('',#280691); +#301376 = CURVE_STYLE('',#301377,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301377 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301378 = STYLED_ITEM('color',(#301379),#31168); +#301379 = PRESENTATION_STYLE_ASSIGNMENT((#301380,#301385)); +#301380 = SURFACE_STYLE_USAGE(.BOTH.,#301381); +#301381 = SURFACE_SIDE_STYLE('',(#301382)); +#301382 = SURFACE_STYLE_FILL_AREA(#301383); +#301383 = FILL_AREA_STYLE('',(#301384)); +#301384 = FILL_AREA_STYLE_COLOUR('',#280691); +#301385 = CURVE_STYLE('',#301386,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301386 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301387 = STYLED_ITEM('color',(#301388),#31185); +#301388 = PRESENTATION_STYLE_ASSIGNMENT((#301389,#301394)); +#301389 = SURFACE_STYLE_USAGE(.BOTH.,#301390); +#301390 = SURFACE_SIDE_STYLE('',(#301391)); +#301391 = SURFACE_STYLE_FILL_AREA(#301392); +#301392 = FILL_AREA_STYLE('',(#301393)); +#301393 = FILL_AREA_STYLE_COLOUR('',#280691); +#301394 = CURVE_STYLE('',#301395,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301395 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301396 = STYLED_ITEM('color',(#301397),#31202); +#301397 = PRESENTATION_STYLE_ASSIGNMENT((#301398,#301403)); +#301398 = SURFACE_STYLE_USAGE(.BOTH.,#301399); +#301399 = SURFACE_SIDE_STYLE('',(#301400)); +#301400 = SURFACE_STYLE_FILL_AREA(#301401); +#301401 = FILL_AREA_STYLE('',(#301402)); +#301402 = FILL_AREA_STYLE_COLOUR('',#280691); +#301403 = CURVE_STYLE('',#301404,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301404 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301405 = STYLED_ITEM('color',(#301406),#31219); +#301406 = PRESENTATION_STYLE_ASSIGNMENT((#301407,#301412)); +#301407 = SURFACE_STYLE_USAGE(.BOTH.,#301408); +#301408 = SURFACE_SIDE_STYLE('',(#301409)); +#301409 = SURFACE_STYLE_FILL_AREA(#301410); +#301410 = FILL_AREA_STYLE('',(#301411)); +#301411 = FILL_AREA_STYLE_COLOUR('',#280691); +#301412 = CURVE_STYLE('',#301413,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301413 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301414 = STYLED_ITEM('color',(#301415),#31236); +#301415 = PRESENTATION_STYLE_ASSIGNMENT((#301416,#301421)); +#301416 = SURFACE_STYLE_USAGE(.BOTH.,#301417); +#301417 = SURFACE_SIDE_STYLE('',(#301418)); +#301418 = SURFACE_STYLE_FILL_AREA(#301419); +#301419 = FILL_AREA_STYLE('',(#301420)); +#301420 = FILL_AREA_STYLE_COLOUR('',#280691); +#301421 = CURVE_STYLE('',#301422,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301422 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301423 = STYLED_ITEM('color',(#301424),#31248); +#301424 = PRESENTATION_STYLE_ASSIGNMENT((#301425,#301430)); +#301425 = SURFACE_STYLE_USAGE(.BOTH.,#301426); +#301426 = SURFACE_SIDE_STYLE('',(#301427)); +#301427 = SURFACE_STYLE_FILL_AREA(#301428); +#301428 = FILL_AREA_STYLE('',(#301429)); +#301429 = FILL_AREA_STYLE_COLOUR('',#280691); +#301430 = CURVE_STYLE('',#301431,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301431 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301432 = STYLED_ITEM('color',(#301433),#31265); +#301433 = PRESENTATION_STYLE_ASSIGNMENT((#301434,#301439)); +#301434 = SURFACE_STYLE_USAGE(.BOTH.,#301435); +#301435 = SURFACE_SIDE_STYLE('',(#301436)); +#301436 = SURFACE_STYLE_FILL_AREA(#301437); +#301437 = FILL_AREA_STYLE('',(#301438)); +#301438 = FILL_AREA_STYLE_COLOUR('',#280691); +#301439 = CURVE_STYLE('',#301440,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301440 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301441 = STYLED_ITEM('color',(#301442),#31282); +#301442 = PRESENTATION_STYLE_ASSIGNMENT((#301443,#301448)); +#301443 = SURFACE_STYLE_USAGE(.BOTH.,#301444); +#301444 = SURFACE_SIDE_STYLE('',(#301445)); +#301445 = SURFACE_STYLE_FILL_AREA(#301446); +#301446 = FILL_AREA_STYLE('',(#301447)); +#301447 = FILL_AREA_STYLE_COLOUR('',#280691); +#301448 = CURVE_STYLE('',#301449,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301450 = STYLED_ITEM('color',(#301451),#31299); +#301451 = PRESENTATION_STYLE_ASSIGNMENT((#301452,#301457)); +#301452 = SURFACE_STYLE_USAGE(.BOTH.,#301453); +#301453 = SURFACE_SIDE_STYLE('',(#301454)); +#301454 = SURFACE_STYLE_FILL_AREA(#301455); +#301455 = FILL_AREA_STYLE('',(#301456)); +#301456 = FILL_AREA_STYLE_COLOUR('',#280691); +#301457 = CURVE_STYLE('',#301458,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301458 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301459 = STYLED_ITEM('color',(#301460),#31316); +#301460 = PRESENTATION_STYLE_ASSIGNMENT((#301461,#301466)); +#301461 = SURFACE_STYLE_USAGE(.BOTH.,#301462); +#301462 = SURFACE_SIDE_STYLE('',(#301463)); +#301463 = SURFACE_STYLE_FILL_AREA(#301464); +#301464 = FILL_AREA_STYLE('',(#301465)); +#301465 = FILL_AREA_STYLE_COLOUR('',#280691); +#301466 = CURVE_STYLE('',#301467,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301467 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301468 = STYLED_ITEM('color',(#301469),#31328); +#301469 = PRESENTATION_STYLE_ASSIGNMENT((#301470,#301475)); +#301470 = SURFACE_STYLE_USAGE(.BOTH.,#301471); +#301471 = SURFACE_SIDE_STYLE('',(#301472)); +#301472 = SURFACE_STYLE_FILL_AREA(#301473); +#301473 = FILL_AREA_STYLE('',(#301474)); +#301474 = FILL_AREA_STYLE_COLOUR('',#280691); +#301475 = CURVE_STYLE('',#301476,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301476 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301477 = STYLED_ITEM('color',(#301478),#31345); +#301478 = PRESENTATION_STYLE_ASSIGNMENT((#301479,#301484)); +#301479 = SURFACE_STYLE_USAGE(.BOTH.,#301480); +#301480 = SURFACE_SIDE_STYLE('',(#301481)); +#301481 = SURFACE_STYLE_FILL_AREA(#301482); +#301482 = FILL_AREA_STYLE('',(#301483)); +#301483 = FILL_AREA_STYLE_COLOUR('',#280691); +#301484 = CURVE_STYLE('',#301485,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301485 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301486 = STYLED_ITEM('color',(#301487),#31362); +#301487 = PRESENTATION_STYLE_ASSIGNMENT((#301488,#301493)); +#301488 = SURFACE_STYLE_USAGE(.BOTH.,#301489); +#301489 = SURFACE_SIDE_STYLE('',(#301490)); +#301490 = SURFACE_STYLE_FILL_AREA(#301491); +#301491 = FILL_AREA_STYLE('',(#301492)); +#301492 = FILL_AREA_STYLE_COLOUR('',#280691); +#301493 = CURVE_STYLE('',#301494,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301494 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301495 = STYLED_ITEM('color',(#301496),#31379); +#301496 = PRESENTATION_STYLE_ASSIGNMENT((#301497,#301502)); +#301497 = SURFACE_STYLE_USAGE(.BOTH.,#301498); +#301498 = SURFACE_SIDE_STYLE('',(#301499)); +#301499 = SURFACE_STYLE_FILL_AREA(#301500); +#301500 = FILL_AREA_STYLE('',(#301501)); +#301501 = FILL_AREA_STYLE_COLOUR('',#280691); +#301502 = CURVE_STYLE('',#301503,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301504 = STYLED_ITEM('color',(#301505),#31396); +#301505 = PRESENTATION_STYLE_ASSIGNMENT((#301506,#301511)); +#301506 = SURFACE_STYLE_USAGE(.BOTH.,#301507); +#301507 = SURFACE_SIDE_STYLE('',(#301508)); +#301508 = SURFACE_STYLE_FILL_AREA(#301509); +#301509 = FILL_AREA_STYLE('',(#301510)); +#301510 = FILL_AREA_STYLE_COLOUR('',#280691); +#301511 = CURVE_STYLE('',#301512,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301513 = STYLED_ITEM('color',(#301514),#31408); +#301514 = PRESENTATION_STYLE_ASSIGNMENT((#301515,#301520)); +#301515 = SURFACE_STYLE_USAGE(.BOTH.,#301516); +#301516 = SURFACE_SIDE_STYLE('',(#301517)); +#301517 = SURFACE_STYLE_FILL_AREA(#301518); +#301518 = FILL_AREA_STYLE('',(#301519)); +#301519 = FILL_AREA_STYLE_COLOUR('',#280691); +#301520 = CURVE_STYLE('',#301521,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301522 = STYLED_ITEM('color',(#301523),#31425); +#301523 = PRESENTATION_STYLE_ASSIGNMENT((#301524,#301529)); +#301524 = SURFACE_STYLE_USAGE(.BOTH.,#301525); +#301525 = SURFACE_SIDE_STYLE('',(#301526)); +#301526 = SURFACE_STYLE_FILL_AREA(#301527); +#301527 = FILL_AREA_STYLE('',(#301528)); +#301528 = FILL_AREA_STYLE_COLOUR('',#280691); +#301529 = CURVE_STYLE('',#301530,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301531 = STYLED_ITEM('color',(#301532),#31442); +#301532 = PRESENTATION_STYLE_ASSIGNMENT((#301533,#301538)); +#301533 = SURFACE_STYLE_USAGE(.BOTH.,#301534); +#301534 = SURFACE_SIDE_STYLE('',(#301535)); +#301535 = SURFACE_STYLE_FILL_AREA(#301536); +#301536 = FILL_AREA_STYLE('',(#301537)); +#301537 = FILL_AREA_STYLE_COLOUR('',#280691); +#301538 = CURVE_STYLE('',#301539,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301539 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301540 = STYLED_ITEM('color',(#301541),#31459); +#301541 = PRESENTATION_STYLE_ASSIGNMENT((#301542,#301547)); +#301542 = SURFACE_STYLE_USAGE(.BOTH.,#301543); +#301543 = SURFACE_SIDE_STYLE('',(#301544)); +#301544 = SURFACE_STYLE_FILL_AREA(#301545); +#301545 = FILL_AREA_STYLE('',(#301546)); +#301546 = FILL_AREA_STYLE_COLOUR('',#280691); +#301547 = CURVE_STYLE('',#301548,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301548 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301549 = STYLED_ITEM('color',(#301550),#31476); +#301550 = PRESENTATION_STYLE_ASSIGNMENT((#301551,#301556)); +#301551 = SURFACE_STYLE_USAGE(.BOTH.,#301552); +#301552 = SURFACE_SIDE_STYLE('',(#301553)); +#301553 = SURFACE_STYLE_FILL_AREA(#301554); +#301554 = FILL_AREA_STYLE('',(#301555)); +#301555 = FILL_AREA_STYLE_COLOUR('',#280691); +#301556 = CURVE_STYLE('',#301557,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301557 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301558 = STYLED_ITEM('color',(#301559),#31488); +#301559 = PRESENTATION_STYLE_ASSIGNMENT((#301560,#301565)); +#301560 = SURFACE_STYLE_USAGE(.BOTH.,#301561); +#301561 = SURFACE_SIDE_STYLE('',(#301562)); +#301562 = SURFACE_STYLE_FILL_AREA(#301563); +#301563 = FILL_AREA_STYLE('',(#301564)); +#301564 = FILL_AREA_STYLE_COLOUR('',#280691); +#301565 = CURVE_STYLE('',#301566,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301566 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301567 = STYLED_ITEM('color',(#301568),#31505); +#301568 = PRESENTATION_STYLE_ASSIGNMENT((#301569,#301574)); +#301569 = SURFACE_STYLE_USAGE(.BOTH.,#301570); +#301570 = SURFACE_SIDE_STYLE('',(#301571)); +#301571 = SURFACE_STYLE_FILL_AREA(#301572); +#301572 = FILL_AREA_STYLE('',(#301573)); +#301573 = FILL_AREA_STYLE_COLOUR('',#280691); +#301574 = CURVE_STYLE('',#301575,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301575 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301576 = STYLED_ITEM('color',(#301577),#31522); +#301577 = PRESENTATION_STYLE_ASSIGNMENT((#301578,#301583)); +#301578 = SURFACE_STYLE_USAGE(.BOTH.,#301579); +#301579 = SURFACE_SIDE_STYLE('',(#301580)); +#301580 = SURFACE_STYLE_FILL_AREA(#301581); +#301581 = FILL_AREA_STYLE('',(#301582)); +#301582 = FILL_AREA_STYLE_COLOUR('',#280691); +#301583 = CURVE_STYLE('',#301584,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301584 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301585 = STYLED_ITEM('color',(#301586),#31539); +#301586 = PRESENTATION_STYLE_ASSIGNMENT((#301587,#301592)); +#301587 = SURFACE_STYLE_USAGE(.BOTH.,#301588); +#301588 = SURFACE_SIDE_STYLE('',(#301589)); +#301589 = SURFACE_STYLE_FILL_AREA(#301590); +#301590 = FILL_AREA_STYLE('',(#301591)); +#301591 = FILL_AREA_STYLE_COLOUR('',#280691); +#301592 = CURVE_STYLE('',#301593,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301593 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301594 = STYLED_ITEM('color',(#301595),#31556); +#301595 = PRESENTATION_STYLE_ASSIGNMENT((#301596,#301601)); +#301596 = SURFACE_STYLE_USAGE(.BOTH.,#301597); +#301597 = SURFACE_SIDE_STYLE('',(#301598)); +#301598 = SURFACE_STYLE_FILL_AREA(#301599); +#301599 = FILL_AREA_STYLE('',(#301600)); +#301600 = FILL_AREA_STYLE_COLOUR('',#280691); +#301601 = CURVE_STYLE('',#301602,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301602 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301603 = STYLED_ITEM('color',(#301604),#31568); +#301604 = PRESENTATION_STYLE_ASSIGNMENT((#301605,#301610)); +#301605 = SURFACE_STYLE_USAGE(.BOTH.,#301606); +#301606 = SURFACE_SIDE_STYLE('',(#301607)); +#301607 = SURFACE_STYLE_FILL_AREA(#301608); +#301608 = FILL_AREA_STYLE('',(#301609)); +#301609 = FILL_AREA_STYLE_COLOUR('',#280691); +#301610 = CURVE_STYLE('',#301611,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301611 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301612 = STYLED_ITEM('color',(#301613),#31585); +#301613 = PRESENTATION_STYLE_ASSIGNMENT((#301614,#301619)); +#301614 = SURFACE_STYLE_USAGE(.BOTH.,#301615); +#301615 = SURFACE_SIDE_STYLE('',(#301616)); +#301616 = SURFACE_STYLE_FILL_AREA(#301617); +#301617 = FILL_AREA_STYLE('',(#301618)); +#301618 = FILL_AREA_STYLE_COLOUR('',#280691); +#301619 = CURVE_STYLE('',#301620,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301620 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301621 = STYLED_ITEM('color',(#301622),#31602); +#301622 = PRESENTATION_STYLE_ASSIGNMENT((#301623,#301628)); +#301623 = SURFACE_STYLE_USAGE(.BOTH.,#301624); +#301624 = SURFACE_SIDE_STYLE('',(#301625)); +#301625 = SURFACE_STYLE_FILL_AREA(#301626); +#301626 = FILL_AREA_STYLE('',(#301627)); +#301627 = FILL_AREA_STYLE_COLOUR('',#280691); +#301628 = CURVE_STYLE('',#301629,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301629 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301630 = STYLED_ITEM('color',(#301631),#31619); +#301631 = PRESENTATION_STYLE_ASSIGNMENT((#301632,#301637)); +#301632 = SURFACE_STYLE_USAGE(.BOTH.,#301633); +#301633 = SURFACE_SIDE_STYLE('',(#301634)); +#301634 = SURFACE_STYLE_FILL_AREA(#301635); +#301635 = FILL_AREA_STYLE('',(#301636)); +#301636 = FILL_AREA_STYLE_COLOUR('',#280691); +#301637 = CURVE_STYLE('',#301638,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301638 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301639 = STYLED_ITEM('color',(#301640),#31636); +#301640 = PRESENTATION_STYLE_ASSIGNMENT((#301641,#301646)); +#301641 = SURFACE_STYLE_USAGE(.BOTH.,#301642); +#301642 = SURFACE_SIDE_STYLE('',(#301643)); +#301643 = SURFACE_STYLE_FILL_AREA(#301644); +#301644 = FILL_AREA_STYLE('',(#301645)); +#301645 = FILL_AREA_STYLE_COLOUR('',#280691); +#301646 = CURVE_STYLE('',#301647,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301648 = STYLED_ITEM('color',(#301649),#31648); +#301649 = PRESENTATION_STYLE_ASSIGNMENT((#301650,#301655)); +#301650 = SURFACE_STYLE_USAGE(.BOTH.,#301651); +#301651 = SURFACE_SIDE_STYLE('',(#301652)); +#301652 = SURFACE_STYLE_FILL_AREA(#301653); +#301653 = FILL_AREA_STYLE('',(#301654)); +#301654 = FILL_AREA_STYLE_COLOUR('',#280691); +#301655 = CURVE_STYLE('',#301656,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301656 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301657 = STYLED_ITEM('color',(#301658),#31665); +#301658 = PRESENTATION_STYLE_ASSIGNMENT((#301659,#301664)); +#301659 = SURFACE_STYLE_USAGE(.BOTH.,#301660); +#301660 = SURFACE_SIDE_STYLE('',(#301661)); +#301661 = SURFACE_STYLE_FILL_AREA(#301662); +#301662 = FILL_AREA_STYLE('',(#301663)); +#301663 = FILL_AREA_STYLE_COLOUR('',#280691); +#301664 = CURVE_STYLE('',#301665,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301665 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301666 = STYLED_ITEM('color',(#301667),#31682); +#301667 = PRESENTATION_STYLE_ASSIGNMENT((#301668,#301673)); +#301668 = SURFACE_STYLE_USAGE(.BOTH.,#301669); +#301669 = SURFACE_SIDE_STYLE('',(#301670)); +#301670 = SURFACE_STYLE_FILL_AREA(#301671); +#301671 = FILL_AREA_STYLE('',(#301672)); +#301672 = FILL_AREA_STYLE_COLOUR('',#280691); +#301673 = CURVE_STYLE('',#301674,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301674 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301675 = STYLED_ITEM('color',(#301676),#31699); +#301676 = PRESENTATION_STYLE_ASSIGNMENT((#301677,#301682)); +#301677 = SURFACE_STYLE_USAGE(.BOTH.,#301678); +#301678 = SURFACE_SIDE_STYLE('',(#301679)); +#301679 = SURFACE_STYLE_FILL_AREA(#301680); +#301680 = FILL_AREA_STYLE('',(#301681)); +#301681 = FILL_AREA_STYLE_COLOUR('',#280691); +#301682 = CURVE_STYLE('',#301683,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301684 = STYLED_ITEM('color',(#301685),#31716); +#301685 = PRESENTATION_STYLE_ASSIGNMENT((#301686,#301691)); +#301686 = SURFACE_STYLE_USAGE(.BOTH.,#301687); +#301687 = SURFACE_SIDE_STYLE('',(#301688)); +#301688 = SURFACE_STYLE_FILL_AREA(#301689); +#301689 = FILL_AREA_STYLE('',(#301690)); +#301690 = FILL_AREA_STYLE_COLOUR('',#280691); +#301691 = CURVE_STYLE('',#301692,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301692 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301693 = STYLED_ITEM('color',(#301694),#31728); +#301694 = PRESENTATION_STYLE_ASSIGNMENT((#301695,#301700)); +#301695 = SURFACE_STYLE_USAGE(.BOTH.,#301696); +#301696 = SURFACE_SIDE_STYLE('',(#301697)); +#301697 = SURFACE_STYLE_FILL_AREA(#301698); +#301698 = FILL_AREA_STYLE('',(#301699)); +#301699 = FILL_AREA_STYLE_COLOUR('',#280691); +#301700 = CURVE_STYLE('',#301701,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301701 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301702 = STYLED_ITEM('color',(#301703),#31745); +#301703 = PRESENTATION_STYLE_ASSIGNMENT((#301704,#301709)); +#301704 = SURFACE_STYLE_USAGE(.BOTH.,#301705); +#301705 = SURFACE_SIDE_STYLE('',(#301706)); +#301706 = SURFACE_STYLE_FILL_AREA(#301707); +#301707 = FILL_AREA_STYLE('',(#301708)); +#301708 = FILL_AREA_STYLE_COLOUR('',#280691); +#301709 = CURVE_STYLE('',#301710,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301710 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301711 = STYLED_ITEM('color',(#301712),#31762); +#301712 = PRESENTATION_STYLE_ASSIGNMENT((#301713,#301718)); +#301713 = SURFACE_STYLE_USAGE(.BOTH.,#301714); +#301714 = SURFACE_SIDE_STYLE('',(#301715)); +#301715 = SURFACE_STYLE_FILL_AREA(#301716); +#301716 = FILL_AREA_STYLE('',(#301717)); +#301717 = FILL_AREA_STYLE_COLOUR('',#280691); +#301718 = CURVE_STYLE('',#301719,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301719 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301720 = STYLED_ITEM('color',(#301721),#31779); +#301721 = PRESENTATION_STYLE_ASSIGNMENT((#301722,#301727)); +#301722 = SURFACE_STYLE_USAGE(.BOTH.,#301723); +#301723 = SURFACE_SIDE_STYLE('',(#301724)); +#301724 = SURFACE_STYLE_FILL_AREA(#301725); +#301725 = FILL_AREA_STYLE('',(#301726)); +#301726 = FILL_AREA_STYLE_COLOUR('',#280691); +#301727 = CURVE_STYLE('',#301728,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301728 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301729 = STYLED_ITEM('color',(#301730),#31796); +#301730 = PRESENTATION_STYLE_ASSIGNMENT((#301731,#301736)); +#301731 = SURFACE_STYLE_USAGE(.BOTH.,#301732); +#301732 = SURFACE_SIDE_STYLE('',(#301733)); +#301733 = SURFACE_STYLE_FILL_AREA(#301734); +#301734 = FILL_AREA_STYLE('',(#301735)); +#301735 = FILL_AREA_STYLE_COLOUR('',#280691); +#301736 = CURVE_STYLE('',#301737,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301737 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301738 = STYLED_ITEM('color',(#301739),#31808); +#301739 = PRESENTATION_STYLE_ASSIGNMENT((#301740,#301745)); +#301740 = SURFACE_STYLE_USAGE(.BOTH.,#301741); +#301741 = SURFACE_SIDE_STYLE('',(#301742)); +#301742 = SURFACE_STYLE_FILL_AREA(#301743); +#301743 = FILL_AREA_STYLE('',(#301744)); +#301744 = FILL_AREA_STYLE_COLOUR('',#280691); +#301745 = CURVE_STYLE('',#301746,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301746 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301747 = STYLED_ITEM('color',(#301748),#31825); +#301748 = PRESENTATION_STYLE_ASSIGNMENT((#301749,#301754)); +#301749 = SURFACE_STYLE_USAGE(.BOTH.,#301750); +#301750 = SURFACE_SIDE_STYLE('',(#301751)); +#301751 = SURFACE_STYLE_FILL_AREA(#301752); +#301752 = FILL_AREA_STYLE('',(#301753)); +#301753 = FILL_AREA_STYLE_COLOUR('',#280691); +#301754 = CURVE_STYLE('',#301755,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301755 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301756 = STYLED_ITEM('color',(#301757),#31842); +#301757 = PRESENTATION_STYLE_ASSIGNMENT((#301758,#301763)); +#301758 = SURFACE_STYLE_USAGE(.BOTH.,#301759); +#301759 = SURFACE_SIDE_STYLE('',(#301760)); +#301760 = SURFACE_STYLE_FILL_AREA(#301761); +#301761 = FILL_AREA_STYLE('',(#301762)); +#301762 = FILL_AREA_STYLE_COLOUR('',#280691); +#301763 = CURVE_STYLE('',#301764,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301764 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301765 = STYLED_ITEM('color',(#301766),#31859); +#301766 = PRESENTATION_STYLE_ASSIGNMENT((#301767,#301772)); +#301767 = SURFACE_STYLE_USAGE(.BOTH.,#301768); +#301768 = SURFACE_SIDE_STYLE('',(#301769)); +#301769 = SURFACE_STYLE_FILL_AREA(#301770); +#301770 = FILL_AREA_STYLE('',(#301771)); +#301771 = FILL_AREA_STYLE_COLOUR('',#280691); +#301772 = CURVE_STYLE('',#301773,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301774 = STYLED_ITEM('color',(#301775),#31876); +#301775 = PRESENTATION_STYLE_ASSIGNMENT((#301776,#301781)); +#301776 = SURFACE_STYLE_USAGE(.BOTH.,#301777); +#301777 = SURFACE_SIDE_STYLE('',(#301778)); +#301778 = SURFACE_STYLE_FILL_AREA(#301779); +#301779 = FILL_AREA_STYLE('',(#301780)); +#301780 = FILL_AREA_STYLE_COLOUR('',#280691); +#301781 = CURVE_STYLE('',#301782,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301782 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301783 = STYLED_ITEM('color',(#301784),#31888); +#301784 = PRESENTATION_STYLE_ASSIGNMENT((#301785,#301790)); +#301785 = SURFACE_STYLE_USAGE(.BOTH.,#301786); +#301786 = SURFACE_SIDE_STYLE('',(#301787)); +#301787 = SURFACE_STYLE_FILL_AREA(#301788); +#301788 = FILL_AREA_STYLE('',(#301789)); +#301789 = FILL_AREA_STYLE_COLOUR('',#279624); +#301790 = CURVE_STYLE('',#301791,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#301791 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301792 = OVER_RIDING_STYLED_ITEM('overriding color',(#301793),#31895, + #301783); +#301793 = PRESENTATION_STYLE_ASSIGNMENT((#301794,#301799)); +#301794 = SURFACE_STYLE_USAGE(.BOTH.,#301795); +#301795 = SURFACE_SIDE_STYLE('',(#301796)); +#301796 = SURFACE_STYLE_FILL_AREA(#301797); +#301797 = FILL_AREA_STYLE('',(#301798)); +#301798 = FILL_AREA_STYLE_COLOUR('',#280691); +#301799 = CURVE_STYLE('',#301800,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301800 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301801 = STYLED_ITEM('color',(#301802),#31905); +#301802 = PRESENTATION_STYLE_ASSIGNMENT((#301803,#301808)); +#301803 = SURFACE_STYLE_USAGE(.BOTH.,#301804); +#301804 = SURFACE_SIDE_STYLE('',(#301805)); +#301805 = SURFACE_STYLE_FILL_AREA(#301806); +#301806 = FILL_AREA_STYLE('',(#301807)); +#301807 = FILL_AREA_STYLE_COLOUR('',#279624); +#301808 = CURVE_STYLE('',#301809,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#301809 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301810 = OVER_RIDING_STYLED_ITEM('overriding color',(#301811),#31910, + #301801); +#301811 = PRESENTATION_STYLE_ASSIGNMENT((#301812,#301817)); +#301812 = SURFACE_STYLE_USAGE(.BOTH.,#301813); +#301813 = SURFACE_SIDE_STYLE('',(#301814)); +#301814 = SURFACE_STYLE_FILL_AREA(#301815); +#301815 = FILL_AREA_STYLE('',(#301816)); +#301816 = FILL_AREA_STYLE_COLOUR('',#280691); +#301817 = CURVE_STYLE('',#301818,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301818 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301819 = STYLED_ITEM('color',(#301820),#31922); +#301820 = PRESENTATION_STYLE_ASSIGNMENT((#301821,#301826)); +#301821 = SURFACE_STYLE_USAGE(.BOTH.,#301822); +#301822 = SURFACE_SIDE_STYLE('',(#301823)); +#301823 = SURFACE_STYLE_FILL_AREA(#301824); +#301824 = FILL_AREA_STYLE('',(#301825)); +#301825 = FILL_AREA_STYLE_COLOUR('',#280691); +#301826 = CURVE_STYLE('',#301827,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301827 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301828 = STYLED_ITEM('color',(#301829),#31971); +#301829 = PRESENTATION_STYLE_ASSIGNMENT((#301830,#301835)); +#301830 = SURFACE_STYLE_USAGE(.BOTH.,#301831); +#301831 = SURFACE_SIDE_STYLE('',(#301832)); +#301832 = SURFACE_STYLE_FILL_AREA(#301833); +#301833 = FILL_AREA_STYLE('',(#301834)); +#301834 = FILL_AREA_STYLE_COLOUR('',#280691); +#301835 = CURVE_STYLE('',#301836,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301836 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301837 = STYLED_ITEM('color',(#301838),#31995); +#301838 = PRESENTATION_STYLE_ASSIGNMENT((#301839,#301844)); +#301839 = SURFACE_STYLE_USAGE(.BOTH.,#301840); +#301840 = SURFACE_SIDE_STYLE('',(#301841)); +#301841 = SURFACE_STYLE_FILL_AREA(#301842); +#301842 = FILL_AREA_STYLE('',(#301843)); +#301843 = FILL_AREA_STYLE_COLOUR('',#280691); +#301844 = CURVE_STYLE('',#301845,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301845 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301846 = STYLED_ITEM('color',(#301847),#32037); +#301847 = PRESENTATION_STYLE_ASSIGNMENT((#301848,#301853)); +#301848 = SURFACE_STYLE_USAGE(.BOTH.,#301849); +#301849 = SURFACE_SIDE_STYLE('',(#301850)); +#301850 = SURFACE_STYLE_FILL_AREA(#301851); +#301851 = FILL_AREA_STYLE('',(#301852)); +#301852 = FILL_AREA_STYLE_COLOUR('',#280691); +#301853 = CURVE_STYLE('',#301854,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301854 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301855 = STYLED_ITEM('color',(#301856),#32054); +#301856 = PRESENTATION_STYLE_ASSIGNMENT((#301857,#301862)); +#301857 = SURFACE_STYLE_USAGE(.BOTH.,#301858); +#301858 = SURFACE_SIDE_STYLE('',(#301859)); +#301859 = SURFACE_STYLE_FILL_AREA(#301860); +#301860 = FILL_AREA_STYLE('',(#301861)); +#301861 = FILL_AREA_STYLE_COLOUR('',#279624); +#301862 = CURVE_STYLE('',#301863,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#301863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301864 = OVER_RIDING_STYLED_ITEM('overriding color',(#301865),#32061, + #301855); +#301865 = PRESENTATION_STYLE_ASSIGNMENT((#301866,#301871)); +#301866 = SURFACE_STYLE_USAGE(.BOTH.,#301867); +#301867 = SURFACE_SIDE_STYLE('',(#301868)); +#301868 = SURFACE_STYLE_FILL_AREA(#301869); +#301869 = FILL_AREA_STYLE('',(#301870)); +#301870 = FILL_AREA_STYLE_COLOUR('',#280691); +#301871 = CURVE_STYLE('',#301872,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301872 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301873 = STYLED_ITEM('color',(#301874),#32071); +#301874 = PRESENTATION_STYLE_ASSIGNMENT((#301875,#301880)); +#301875 = SURFACE_STYLE_USAGE(.BOTH.,#301876); +#301876 = SURFACE_SIDE_STYLE('',(#301877)); +#301877 = SURFACE_STYLE_FILL_AREA(#301878); +#301878 = FILL_AREA_STYLE('',(#301879)); +#301879 = FILL_AREA_STYLE_COLOUR('',#279624); +#301880 = CURVE_STYLE('',#301881,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#301881 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301882 = OVER_RIDING_STYLED_ITEM('overriding color',(#301883),#32076, + #301873); +#301883 = PRESENTATION_STYLE_ASSIGNMENT((#301884,#301889)); +#301884 = SURFACE_STYLE_USAGE(.BOTH.,#301885); +#301885 = SURFACE_SIDE_STYLE('',(#301886)); +#301886 = SURFACE_STYLE_FILL_AREA(#301887); +#301887 = FILL_AREA_STYLE('',(#301888)); +#301888 = FILL_AREA_STYLE_COLOUR('',#280691); +#301889 = CURVE_STYLE('',#301890,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301891 = STYLED_ITEM('color',(#301892),#32088); +#301892 = PRESENTATION_STYLE_ASSIGNMENT((#301893,#301898)); +#301893 = SURFACE_STYLE_USAGE(.BOTH.,#301894); +#301894 = SURFACE_SIDE_STYLE('',(#301895)); +#301895 = SURFACE_STYLE_FILL_AREA(#301896); +#301896 = FILL_AREA_STYLE('',(#301897)); +#301897 = FILL_AREA_STYLE_COLOUR('',#280691); +#301898 = CURVE_STYLE('',#301899,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301899 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301900 = STYLED_ITEM('color',(#301901),#32137); +#301901 = PRESENTATION_STYLE_ASSIGNMENT((#301902,#301907)); +#301902 = SURFACE_STYLE_USAGE(.BOTH.,#301903); +#301903 = SURFACE_SIDE_STYLE('',(#301904)); +#301904 = SURFACE_STYLE_FILL_AREA(#301905); +#301905 = FILL_AREA_STYLE('',(#301906)); +#301906 = FILL_AREA_STYLE_COLOUR('',#280691); +#301907 = CURVE_STYLE('',#301908,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301908 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301909 = STYLED_ITEM('color',(#301910),#32161); +#301910 = PRESENTATION_STYLE_ASSIGNMENT((#301911,#301916)); +#301911 = SURFACE_STYLE_USAGE(.BOTH.,#301912); +#301912 = SURFACE_SIDE_STYLE('',(#301913)); +#301913 = SURFACE_STYLE_FILL_AREA(#301914); +#301914 = FILL_AREA_STYLE('',(#301915)); +#301915 = FILL_AREA_STYLE_COLOUR('',#280691); +#301916 = CURVE_STYLE('',#301917,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301917 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301918 = STYLED_ITEM('color',(#301919),#32203); +#301919 = PRESENTATION_STYLE_ASSIGNMENT((#301920,#301925)); +#301920 = SURFACE_STYLE_USAGE(.BOTH.,#301921); +#301921 = SURFACE_SIDE_STYLE('',(#301922)); +#301922 = SURFACE_STYLE_FILL_AREA(#301923); +#301923 = FILL_AREA_STYLE('',(#301924)); +#301924 = FILL_AREA_STYLE_COLOUR('',#280691); +#301925 = CURVE_STYLE('',#301926,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301926 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301927 = STYLED_ITEM('color',(#301928),#32220); +#301928 = PRESENTATION_STYLE_ASSIGNMENT((#301929,#301934)); +#301929 = SURFACE_STYLE_USAGE(.BOTH.,#301930); +#301930 = SURFACE_SIDE_STYLE('',(#301931)); +#301931 = SURFACE_STYLE_FILL_AREA(#301932); +#301932 = FILL_AREA_STYLE('',(#301933)); +#301933 = FILL_AREA_STYLE_COLOUR('',#279624); +#301934 = CURVE_STYLE('',#301935,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#301935 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301936 = OVER_RIDING_STYLED_ITEM('overriding color',(#301937),#32227, + #301927); +#301937 = PRESENTATION_STYLE_ASSIGNMENT((#301938,#301943)); +#301938 = SURFACE_STYLE_USAGE(.BOTH.,#301939); +#301939 = SURFACE_SIDE_STYLE('',(#301940)); +#301940 = SURFACE_STYLE_FILL_AREA(#301941); +#301941 = FILL_AREA_STYLE('',(#301942)); +#301942 = FILL_AREA_STYLE_COLOUR('',#280691); +#301943 = CURVE_STYLE('',#301944,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301944 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301945 = STYLED_ITEM('color',(#301946),#32237); +#301946 = PRESENTATION_STYLE_ASSIGNMENT((#301947,#301952)); +#301947 = SURFACE_STYLE_USAGE(.BOTH.,#301948); +#301948 = SURFACE_SIDE_STYLE('',(#301949)); +#301949 = SURFACE_STYLE_FILL_AREA(#301950); +#301950 = FILL_AREA_STYLE('',(#301951)); +#301951 = FILL_AREA_STYLE_COLOUR('',#279624); +#301952 = CURVE_STYLE('',#301953,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#301953 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301954 = OVER_RIDING_STYLED_ITEM('overriding color',(#301955),#32242, + #301945); +#301955 = PRESENTATION_STYLE_ASSIGNMENT((#301956,#301961)); +#301956 = SURFACE_STYLE_USAGE(.BOTH.,#301957); +#301957 = SURFACE_SIDE_STYLE('',(#301958)); +#301958 = SURFACE_STYLE_FILL_AREA(#301959); +#301959 = FILL_AREA_STYLE('',(#301960)); +#301960 = FILL_AREA_STYLE_COLOUR('',#280691); +#301961 = CURVE_STYLE('',#301962,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301962 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301963 = STYLED_ITEM('color',(#301964),#32254); +#301964 = PRESENTATION_STYLE_ASSIGNMENT((#301965,#301970)); +#301965 = SURFACE_STYLE_USAGE(.BOTH.,#301966); +#301966 = SURFACE_SIDE_STYLE('',(#301967)); +#301967 = SURFACE_STYLE_FILL_AREA(#301968); +#301968 = FILL_AREA_STYLE('',(#301969)); +#301969 = FILL_AREA_STYLE_COLOUR('',#280691); +#301970 = CURVE_STYLE('',#301971,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301971 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301972 = STYLED_ITEM('color',(#301973),#32303); +#301973 = PRESENTATION_STYLE_ASSIGNMENT((#301974,#301979)); +#301974 = SURFACE_STYLE_USAGE(.BOTH.,#301975); +#301975 = SURFACE_SIDE_STYLE('',(#301976)); +#301976 = SURFACE_STYLE_FILL_AREA(#301977); +#301977 = FILL_AREA_STYLE('',(#301978)); +#301978 = FILL_AREA_STYLE_COLOUR('',#280691); +#301979 = CURVE_STYLE('',#301980,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301980 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301981 = STYLED_ITEM('color',(#301982),#32327); +#301982 = PRESENTATION_STYLE_ASSIGNMENT((#301983,#301988)); +#301983 = SURFACE_STYLE_USAGE(.BOTH.,#301984); +#301984 = SURFACE_SIDE_STYLE('',(#301985)); +#301985 = SURFACE_STYLE_FILL_AREA(#301986); +#301986 = FILL_AREA_STYLE('',(#301987)); +#301987 = FILL_AREA_STYLE_COLOUR('',#280691); +#301988 = CURVE_STYLE('',#301989,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301989 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301990 = STYLED_ITEM('color',(#301991),#32369); +#301991 = PRESENTATION_STYLE_ASSIGNMENT((#301992,#301997)); +#301992 = SURFACE_STYLE_USAGE(.BOTH.,#301993); +#301993 = SURFACE_SIDE_STYLE('',(#301994)); +#301994 = SURFACE_STYLE_FILL_AREA(#301995); +#301995 = FILL_AREA_STYLE('',(#301996)); +#301996 = FILL_AREA_STYLE_COLOUR('',#280691); +#301997 = CURVE_STYLE('',#301998,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#301998 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301999 = STYLED_ITEM('color',(#302000),#32386); +#302000 = PRESENTATION_STYLE_ASSIGNMENT((#302001,#302006)); +#302001 = SURFACE_STYLE_USAGE(.BOTH.,#302002); +#302002 = SURFACE_SIDE_STYLE('',(#302003)); +#302003 = SURFACE_STYLE_FILL_AREA(#302004); +#302004 = FILL_AREA_STYLE('',(#302005)); +#302005 = FILL_AREA_STYLE_COLOUR('',#279624); +#302006 = CURVE_STYLE('',#302007,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302007 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302008 = OVER_RIDING_STYLED_ITEM('overriding color',(#302009),#32393, + #301999); +#302009 = PRESENTATION_STYLE_ASSIGNMENT((#302010,#302015)); +#302010 = SURFACE_STYLE_USAGE(.BOTH.,#302011); +#302011 = SURFACE_SIDE_STYLE('',(#302012)); +#302012 = SURFACE_STYLE_FILL_AREA(#302013); +#302013 = FILL_AREA_STYLE('',(#302014)); +#302014 = FILL_AREA_STYLE_COLOUR('',#280691); +#302015 = CURVE_STYLE('',#302016,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302016 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302017 = STYLED_ITEM('color',(#302018),#32403); +#302018 = PRESENTATION_STYLE_ASSIGNMENT((#302019,#302024)); +#302019 = SURFACE_STYLE_USAGE(.BOTH.,#302020); +#302020 = SURFACE_SIDE_STYLE('',(#302021)); +#302021 = SURFACE_STYLE_FILL_AREA(#302022); +#302022 = FILL_AREA_STYLE('',(#302023)); +#302023 = FILL_AREA_STYLE_COLOUR('',#279624); +#302024 = CURVE_STYLE('',#302025,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302025 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302026 = OVER_RIDING_STYLED_ITEM('overriding color',(#302027),#32408, + #302017); +#302027 = PRESENTATION_STYLE_ASSIGNMENT((#302028,#302033)); +#302028 = SURFACE_STYLE_USAGE(.BOTH.,#302029); +#302029 = SURFACE_SIDE_STYLE('',(#302030)); +#302030 = SURFACE_STYLE_FILL_AREA(#302031); +#302031 = FILL_AREA_STYLE('',(#302032)); +#302032 = FILL_AREA_STYLE_COLOUR('',#280691); +#302033 = CURVE_STYLE('',#302034,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302034 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302035 = STYLED_ITEM('color',(#302036),#32420); +#302036 = PRESENTATION_STYLE_ASSIGNMENT((#302037,#302042)); +#302037 = SURFACE_STYLE_USAGE(.BOTH.,#302038); +#302038 = SURFACE_SIDE_STYLE('',(#302039)); +#302039 = SURFACE_STYLE_FILL_AREA(#302040); +#302040 = FILL_AREA_STYLE('',(#302041)); +#302041 = FILL_AREA_STYLE_COLOUR('',#280691); +#302042 = CURVE_STYLE('',#302043,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302043 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302044 = STYLED_ITEM('color',(#302045),#32469); +#302045 = PRESENTATION_STYLE_ASSIGNMENT((#302046,#302051)); +#302046 = SURFACE_STYLE_USAGE(.BOTH.,#302047); +#302047 = SURFACE_SIDE_STYLE('',(#302048)); +#302048 = SURFACE_STYLE_FILL_AREA(#302049); +#302049 = FILL_AREA_STYLE('',(#302050)); +#302050 = FILL_AREA_STYLE_COLOUR('',#280691); +#302051 = CURVE_STYLE('',#302052,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302052 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302053 = STYLED_ITEM('color',(#302054),#32493); +#302054 = PRESENTATION_STYLE_ASSIGNMENT((#302055,#302060)); +#302055 = SURFACE_STYLE_USAGE(.BOTH.,#302056); +#302056 = SURFACE_SIDE_STYLE('',(#302057)); +#302057 = SURFACE_STYLE_FILL_AREA(#302058); +#302058 = FILL_AREA_STYLE('',(#302059)); +#302059 = FILL_AREA_STYLE_COLOUR('',#280691); +#302060 = CURVE_STYLE('',#302061,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302061 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302062 = STYLED_ITEM('color',(#302063),#32535); +#302063 = PRESENTATION_STYLE_ASSIGNMENT((#302064,#302069)); +#302064 = SURFACE_STYLE_USAGE(.BOTH.,#302065); +#302065 = SURFACE_SIDE_STYLE('',(#302066)); +#302066 = SURFACE_STYLE_FILL_AREA(#302067); +#302067 = FILL_AREA_STYLE('',(#302068)); +#302068 = FILL_AREA_STYLE_COLOUR('',#280691); +#302069 = CURVE_STYLE('',#302070,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302071 = STYLED_ITEM('color',(#302072),#32552); +#302072 = PRESENTATION_STYLE_ASSIGNMENT((#302073,#302078)); +#302073 = SURFACE_STYLE_USAGE(.BOTH.,#302074); +#302074 = SURFACE_SIDE_STYLE('',(#302075)); +#302075 = SURFACE_STYLE_FILL_AREA(#302076); +#302076 = FILL_AREA_STYLE('',(#302077)); +#302077 = FILL_AREA_STYLE_COLOUR('',#279624); +#302078 = CURVE_STYLE('',#302079,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302079 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302080 = OVER_RIDING_STYLED_ITEM('overriding color',(#302081),#32559, + #302071); +#302081 = PRESENTATION_STYLE_ASSIGNMENT((#302082,#302087)); +#302082 = SURFACE_STYLE_USAGE(.BOTH.,#302083); +#302083 = SURFACE_SIDE_STYLE('',(#302084)); +#302084 = SURFACE_STYLE_FILL_AREA(#302085); +#302085 = FILL_AREA_STYLE('',(#302086)); +#302086 = FILL_AREA_STYLE_COLOUR('',#280691); +#302087 = CURVE_STYLE('',#302088,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302089 = STYLED_ITEM('color',(#302090),#32569); +#302090 = PRESENTATION_STYLE_ASSIGNMENT((#302091,#302096)); +#302091 = SURFACE_STYLE_USAGE(.BOTH.,#302092); +#302092 = SURFACE_SIDE_STYLE('',(#302093)); +#302093 = SURFACE_STYLE_FILL_AREA(#302094); +#302094 = FILL_AREA_STYLE('',(#302095)); +#302095 = FILL_AREA_STYLE_COLOUR('',#279624); +#302096 = CURVE_STYLE('',#302097,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302098 = OVER_RIDING_STYLED_ITEM('overriding color',(#302099),#32574, + #302089); +#302099 = PRESENTATION_STYLE_ASSIGNMENT((#302100,#302105)); +#302100 = SURFACE_STYLE_USAGE(.BOTH.,#302101); +#302101 = SURFACE_SIDE_STYLE('',(#302102)); +#302102 = SURFACE_STYLE_FILL_AREA(#302103); +#302103 = FILL_AREA_STYLE('',(#302104)); +#302104 = FILL_AREA_STYLE_COLOUR('',#280691); +#302105 = CURVE_STYLE('',#302106,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302107 = STYLED_ITEM('color',(#302108),#32586); +#302108 = PRESENTATION_STYLE_ASSIGNMENT((#302109,#302114)); +#302109 = SURFACE_STYLE_USAGE(.BOTH.,#302110); +#302110 = SURFACE_SIDE_STYLE('',(#302111)); +#302111 = SURFACE_STYLE_FILL_AREA(#302112); +#302112 = FILL_AREA_STYLE('',(#302113)); +#302113 = FILL_AREA_STYLE_COLOUR('',#280691); +#302114 = CURVE_STYLE('',#302115,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302116 = STYLED_ITEM('color',(#302117),#32635); +#302117 = PRESENTATION_STYLE_ASSIGNMENT((#302118,#302123)); +#302118 = SURFACE_STYLE_USAGE(.BOTH.,#302119); +#302119 = SURFACE_SIDE_STYLE('',(#302120)); +#302120 = SURFACE_STYLE_FILL_AREA(#302121); +#302121 = FILL_AREA_STYLE('',(#302122)); +#302122 = FILL_AREA_STYLE_COLOUR('',#280691); +#302123 = CURVE_STYLE('',#302124,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302125 = STYLED_ITEM('color',(#302126),#32659); +#302126 = PRESENTATION_STYLE_ASSIGNMENT((#302127,#302132)); +#302127 = SURFACE_STYLE_USAGE(.BOTH.,#302128); +#302128 = SURFACE_SIDE_STYLE('',(#302129)); +#302129 = SURFACE_STYLE_FILL_AREA(#302130); +#302130 = FILL_AREA_STYLE('',(#302131)); +#302131 = FILL_AREA_STYLE_COLOUR('',#280691); +#302132 = CURVE_STYLE('',#302133,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302134 = STYLED_ITEM('color',(#302135),#32701); +#302135 = PRESENTATION_STYLE_ASSIGNMENT((#302136,#302141)); +#302136 = SURFACE_STYLE_USAGE(.BOTH.,#302137); +#302137 = SURFACE_SIDE_STYLE('',(#302138)); +#302138 = SURFACE_STYLE_FILL_AREA(#302139); +#302139 = FILL_AREA_STYLE('',(#302140)); +#302140 = FILL_AREA_STYLE_COLOUR('',#280691); +#302141 = CURVE_STYLE('',#302142,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302143 = STYLED_ITEM('color',(#302144),#32718); +#302144 = PRESENTATION_STYLE_ASSIGNMENT((#302145,#302150)); +#302145 = SURFACE_STYLE_USAGE(.BOTH.,#302146); +#302146 = SURFACE_SIDE_STYLE('',(#302147)); +#302147 = SURFACE_STYLE_FILL_AREA(#302148); +#302148 = FILL_AREA_STYLE('',(#302149)); +#302149 = FILL_AREA_STYLE_COLOUR('',#279624); +#302150 = CURVE_STYLE('',#302151,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302152 = OVER_RIDING_STYLED_ITEM('overriding color',(#302153),#32725, + #302143); +#302153 = PRESENTATION_STYLE_ASSIGNMENT((#302154,#302159)); +#302154 = SURFACE_STYLE_USAGE(.BOTH.,#302155); +#302155 = SURFACE_SIDE_STYLE('',(#302156)); +#302156 = SURFACE_STYLE_FILL_AREA(#302157); +#302157 = FILL_AREA_STYLE('',(#302158)); +#302158 = FILL_AREA_STYLE_COLOUR('',#280691); +#302159 = CURVE_STYLE('',#302160,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302161 = STYLED_ITEM('color',(#302162),#32735); +#302162 = PRESENTATION_STYLE_ASSIGNMENT((#302163,#302168)); +#302163 = SURFACE_STYLE_USAGE(.BOTH.,#302164); +#302164 = SURFACE_SIDE_STYLE('',(#302165)); +#302165 = SURFACE_STYLE_FILL_AREA(#302166); +#302166 = FILL_AREA_STYLE('',(#302167)); +#302167 = FILL_AREA_STYLE_COLOUR('',#279624); +#302168 = CURVE_STYLE('',#302169,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302170 = OVER_RIDING_STYLED_ITEM('overriding color',(#302171),#32740, + #302161); +#302171 = PRESENTATION_STYLE_ASSIGNMENT((#302172,#302177)); +#302172 = SURFACE_STYLE_USAGE(.BOTH.,#302173); +#302173 = SURFACE_SIDE_STYLE('',(#302174)); +#302174 = SURFACE_STYLE_FILL_AREA(#302175); +#302175 = FILL_AREA_STYLE('',(#302176)); +#302176 = FILL_AREA_STYLE_COLOUR('',#280691); +#302177 = CURVE_STYLE('',#302178,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302179 = STYLED_ITEM('color',(#302180),#32752); +#302180 = PRESENTATION_STYLE_ASSIGNMENT((#302181,#302186)); +#302181 = SURFACE_STYLE_USAGE(.BOTH.,#302182); +#302182 = SURFACE_SIDE_STYLE('',(#302183)); +#302183 = SURFACE_STYLE_FILL_AREA(#302184); +#302184 = FILL_AREA_STYLE('',(#302185)); +#302185 = FILL_AREA_STYLE_COLOUR('',#280691); +#302186 = CURVE_STYLE('',#302187,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302188 = STYLED_ITEM('color',(#302189),#32801); +#302189 = PRESENTATION_STYLE_ASSIGNMENT((#302190,#302195)); +#302190 = SURFACE_STYLE_USAGE(.BOTH.,#302191); +#302191 = SURFACE_SIDE_STYLE('',(#302192)); +#302192 = SURFACE_STYLE_FILL_AREA(#302193); +#302193 = FILL_AREA_STYLE('',(#302194)); +#302194 = FILL_AREA_STYLE_COLOUR('',#280691); +#302195 = CURVE_STYLE('',#302196,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302197 = STYLED_ITEM('color',(#302198),#32825); +#302198 = PRESENTATION_STYLE_ASSIGNMENT((#302199,#302204)); +#302199 = SURFACE_STYLE_USAGE(.BOTH.,#302200); +#302200 = SURFACE_SIDE_STYLE('',(#302201)); +#302201 = SURFACE_STYLE_FILL_AREA(#302202); +#302202 = FILL_AREA_STYLE('',(#302203)); +#302203 = FILL_AREA_STYLE_COLOUR('',#280691); +#302204 = CURVE_STYLE('',#302205,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302206 = STYLED_ITEM('color',(#302207),#32867); +#302207 = PRESENTATION_STYLE_ASSIGNMENT((#302208,#302213)); +#302208 = SURFACE_STYLE_USAGE(.BOTH.,#302209); +#302209 = SURFACE_SIDE_STYLE('',(#302210)); +#302210 = SURFACE_STYLE_FILL_AREA(#302211); +#302211 = FILL_AREA_STYLE('',(#302212)); +#302212 = FILL_AREA_STYLE_COLOUR('',#280691); +#302213 = CURVE_STYLE('',#302214,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302215 = STYLED_ITEM('color',(#302216),#32884); +#302216 = PRESENTATION_STYLE_ASSIGNMENT((#302217,#302222)); +#302217 = SURFACE_STYLE_USAGE(.BOTH.,#302218); +#302218 = SURFACE_SIDE_STYLE('',(#302219)); +#302219 = SURFACE_STYLE_FILL_AREA(#302220); +#302220 = FILL_AREA_STYLE('',(#302221)); +#302221 = FILL_AREA_STYLE_COLOUR('',#279624); +#302222 = CURVE_STYLE('',#302223,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302224 = OVER_RIDING_STYLED_ITEM('overriding color',(#302225),#32891, + #302215); +#302225 = PRESENTATION_STYLE_ASSIGNMENT((#302226,#302231)); +#302226 = SURFACE_STYLE_USAGE(.BOTH.,#302227); +#302227 = SURFACE_SIDE_STYLE('',(#302228)); +#302228 = SURFACE_STYLE_FILL_AREA(#302229); +#302229 = FILL_AREA_STYLE('',(#302230)); +#302230 = FILL_AREA_STYLE_COLOUR('',#280691); +#302231 = CURVE_STYLE('',#302232,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302233 = STYLED_ITEM('color',(#302234),#32901); +#302234 = PRESENTATION_STYLE_ASSIGNMENT((#302235,#302240)); +#302235 = SURFACE_STYLE_USAGE(.BOTH.,#302236); +#302236 = SURFACE_SIDE_STYLE('',(#302237)); +#302237 = SURFACE_STYLE_FILL_AREA(#302238); +#302238 = FILL_AREA_STYLE('',(#302239)); +#302239 = FILL_AREA_STYLE_COLOUR('',#279624); +#302240 = CURVE_STYLE('',#302241,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302242 = OVER_RIDING_STYLED_ITEM('overriding color',(#302243),#32906, + #302233); +#302243 = PRESENTATION_STYLE_ASSIGNMENT((#302244,#302249)); +#302244 = SURFACE_STYLE_USAGE(.BOTH.,#302245); +#302245 = SURFACE_SIDE_STYLE('',(#302246)); +#302246 = SURFACE_STYLE_FILL_AREA(#302247); +#302247 = FILL_AREA_STYLE('',(#302248)); +#302248 = FILL_AREA_STYLE_COLOUR('',#280691); +#302249 = CURVE_STYLE('',#302250,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302251 = STYLED_ITEM('color',(#302252),#32918); +#302252 = PRESENTATION_STYLE_ASSIGNMENT((#302253,#302258)); +#302253 = SURFACE_STYLE_USAGE(.BOTH.,#302254); +#302254 = SURFACE_SIDE_STYLE('',(#302255)); +#302255 = SURFACE_STYLE_FILL_AREA(#302256); +#302256 = FILL_AREA_STYLE('',(#302257)); +#302257 = FILL_AREA_STYLE_COLOUR('',#280691); +#302258 = CURVE_STYLE('',#302259,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302260 = STYLED_ITEM('color',(#302261),#32967); +#302261 = PRESENTATION_STYLE_ASSIGNMENT((#302262,#302267)); +#302262 = SURFACE_STYLE_USAGE(.BOTH.,#302263); +#302263 = SURFACE_SIDE_STYLE('',(#302264)); +#302264 = SURFACE_STYLE_FILL_AREA(#302265); +#302265 = FILL_AREA_STYLE('',(#302266)); +#302266 = FILL_AREA_STYLE_COLOUR('',#280691); +#302267 = CURVE_STYLE('',#302268,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302269 = STYLED_ITEM('color',(#302270),#32991); +#302270 = PRESENTATION_STYLE_ASSIGNMENT((#302271,#302276)); +#302271 = SURFACE_STYLE_USAGE(.BOTH.,#302272); +#302272 = SURFACE_SIDE_STYLE('',(#302273)); +#302273 = SURFACE_STYLE_FILL_AREA(#302274); +#302274 = FILL_AREA_STYLE('',(#302275)); +#302275 = FILL_AREA_STYLE_COLOUR('',#280691); +#302276 = CURVE_STYLE('',#302277,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302278 = STYLED_ITEM('color',(#302279),#33033); +#302279 = PRESENTATION_STYLE_ASSIGNMENT((#302280,#302285)); +#302280 = SURFACE_STYLE_USAGE(.BOTH.,#302281); +#302281 = SURFACE_SIDE_STYLE('',(#302282)); +#302282 = SURFACE_STYLE_FILL_AREA(#302283); +#302283 = FILL_AREA_STYLE('',(#302284)); +#302284 = FILL_AREA_STYLE_COLOUR('',#280691); +#302285 = CURVE_STYLE('',#302286,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302287 = STYLED_ITEM('color',(#302288),#33050); +#302288 = PRESENTATION_STYLE_ASSIGNMENT((#302289,#302294)); +#302289 = SURFACE_STYLE_USAGE(.BOTH.,#302290); +#302290 = SURFACE_SIDE_STYLE('',(#302291)); +#302291 = SURFACE_STYLE_FILL_AREA(#302292); +#302292 = FILL_AREA_STYLE('',(#302293)); +#302293 = FILL_AREA_STYLE_COLOUR('',#279624); +#302294 = CURVE_STYLE('',#302295,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302296 = OVER_RIDING_STYLED_ITEM('overriding color',(#302297),#33057, + #302287); +#302297 = PRESENTATION_STYLE_ASSIGNMENT((#302298,#302303)); +#302298 = SURFACE_STYLE_USAGE(.BOTH.,#302299); +#302299 = SURFACE_SIDE_STYLE('',(#302300)); +#302300 = SURFACE_STYLE_FILL_AREA(#302301); +#302301 = FILL_AREA_STYLE('',(#302302)); +#302302 = FILL_AREA_STYLE_COLOUR('',#280691); +#302303 = CURVE_STYLE('',#302304,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302305 = STYLED_ITEM('color',(#302306),#33067); +#302306 = PRESENTATION_STYLE_ASSIGNMENT((#302307,#302312)); +#302307 = SURFACE_STYLE_USAGE(.BOTH.,#302308); +#302308 = SURFACE_SIDE_STYLE('',(#302309)); +#302309 = SURFACE_STYLE_FILL_AREA(#302310); +#302310 = FILL_AREA_STYLE('',(#302311)); +#302311 = FILL_AREA_STYLE_COLOUR('',#279624); +#302312 = CURVE_STYLE('',#302313,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302314 = OVER_RIDING_STYLED_ITEM('overriding color',(#302315),#33072, + #302305); +#302315 = PRESENTATION_STYLE_ASSIGNMENT((#302316,#302321)); +#302316 = SURFACE_STYLE_USAGE(.BOTH.,#302317); +#302317 = SURFACE_SIDE_STYLE('',(#302318)); +#302318 = SURFACE_STYLE_FILL_AREA(#302319); +#302319 = FILL_AREA_STYLE('',(#302320)); +#302320 = FILL_AREA_STYLE_COLOUR('',#280691); +#302321 = CURVE_STYLE('',#302322,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302323 = STYLED_ITEM('color',(#302324),#33084); +#302324 = PRESENTATION_STYLE_ASSIGNMENT((#302325,#302330)); +#302325 = SURFACE_STYLE_USAGE(.BOTH.,#302326); +#302326 = SURFACE_SIDE_STYLE('',(#302327)); +#302327 = SURFACE_STYLE_FILL_AREA(#302328); +#302328 = FILL_AREA_STYLE('',(#302329)); +#302329 = FILL_AREA_STYLE_COLOUR('',#280691); +#302330 = CURVE_STYLE('',#302331,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302332 = STYLED_ITEM('color',(#302333),#33133); +#302333 = PRESENTATION_STYLE_ASSIGNMENT((#302334,#302339)); +#302334 = SURFACE_STYLE_USAGE(.BOTH.,#302335); +#302335 = SURFACE_SIDE_STYLE('',(#302336)); +#302336 = SURFACE_STYLE_FILL_AREA(#302337); +#302337 = FILL_AREA_STYLE('',(#302338)); +#302338 = FILL_AREA_STYLE_COLOUR('',#280691); +#302339 = CURVE_STYLE('',#302340,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302341 = STYLED_ITEM('color',(#302342),#33157); +#302342 = PRESENTATION_STYLE_ASSIGNMENT((#302343,#302348)); +#302343 = SURFACE_STYLE_USAGE(.BOTH.,#302344); +#302344 = SURFACE_SIDE_STYLE('',(#302345)); +#302345 = SURFACE_STYLE_FILL_AREA(#302346); +#302346 = FILL_AREA_STYLE('',(#302347)); +#302347 = FILL_AREA_STYLE_COLOUR('',#280691); +#302348 = CURVE_STYLE('',#302349,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302350 = STYLED_ITEM('color',(#302351),#33199); +#302351 = PRESENTATION_STYLE_ASSIGNMENT((#302352,#302357)); +#302352 = SURFACE_STYLE_USAGE(.BOTH.,#302353); +#302353 = SURFACE_SIDE_STYLE('',(#302354)); +#302354 = SURFACE_STYLE_FILL_AREA(#302355); +#302355 = FILL_AREA_STYLE('',(#302356)); +#302356 = FILL_AREA_STYLE_COLOUR('',#280691); +#302357 = CURVE_STYLE('',#302358,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302359 = STYLED_ITEM('color',(#302360),#33216); +#302360 = PRESENTATION_STYLE_ASSIGNMENT((#302361,#302366)); +#302361 = SURFACE_STYLE_USAGE(.BOTH.,#302362); +#302362 = SURFACE_SIDE_STYLE('',(#302363)); +#302363 = SURFACE_STYLE_FILL_AREA(#302364); +#302364 = FILL_AREA_STYLE('',(#302365)); +#302365 = FILL_AREA_STYLE_COLOUR('',#279624); +#302366 = CURVE_STYLE('',#302367,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302368 = OVER_RIDING_STYLED_ITEM('overriding color',(#302369),#33223, + #302359); +#302369 = PRESENTATION_STYLE_ASSIGNMENT((#302370,#302375)); +#302370 = SURFACE_STYLE_USAGE(.BOTH.,#302371); +#302371 = SURFACE_SIDE_STYLE('',(#302372)); +#302372 = SURFACE_STYLE_FILL_AREA(#302373); +#302373 = FILL_AREA_STYLE('',(#302374)); +#302374 = FILL_AREA_STYLE_COLOUR('',#280691); +#302375 = CURVE_STYLE('',#302376,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302377 = STYLED_ITEM('color',(#302378),#33233); +#302378 = PRESENTATION_STYLE_ASSIGNMENT((#302379,#302384)); +#302379 = SURFACE_STYLE_USAGE(.BOTH.,#302380); +#302380 = SURFACE_SIDE_STYLE('',(#302381)); +#302381 = SURFACE_STYLE_FILL_AREA(#302382); +#302382 = FILL_AREA_STYLE('',(#302383)); +#302383 = FILL_AREA_STYLE_COLOUR('',#279624); +#302384 = CURVE_STYLE('',#302385,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302386 = OVER_RIDING_STYLED_ITEM('overriding color',(#302387),#33238, + #302377); +#302387 = PRESENTATION_STYLE_ASSIGNMENT((#302388,#302393)); +#302388 = SURFACE_STYLE_USAGE(.BOTH.,#302389); +#302389 = SURFACE_SIDE_STYLE('',(#302390)); +#302390 = SURFACE_STYLE_FILL_AREA(#302391); +#302391 = FILL_AREA_STYLE('',(#302392)); +#302392 = FILL_AREA_STYLE_COLOUR('',#280691); +#302393 = CURVE_STYLE('',#302394,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302395 = STYLED_ITEM('color',(#302396),#33250); +#302396 = PRESENTATION_STYLE_ASSIGNMENT((#302397,#302402)); +#302397 = SURFACE_STYLE_USAGE(.BOTH.,#302398); +#302398 = SURFACE_SIDE_STYLE('',(#302399)); +#302399 = SURFACE_STYLE_FILL_AREA(#302400); +#302400 = FILL_AREA_STYLE('',(#302401)); +#302401 = FILL_AREA_STYLE_COLOUR('',#280691); +#302402 = CURVE_STYLE('',#302403,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302404 = STYLED_ITEM('color',(#302405),#33299); +#302405 = PRESENTATION_STYLE_ASSIGNMENT((#302406,#302411)); +#302406 = SURFACE_STYLE_USAGE(.BOTH.,#302407); +#302407 = SURFACE_SIDE_STYLE('',(#302408)); +#302408 = SURFACE_STYLE_FILL_AREA(#302409); +#302409 = FILL_AREA_STYLE('',(#302410)); +#302410 = FILL_AREA_STYLE_COLOUR('',#280691); +#302411 = CURVE_STYLE('',#302412,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302413 = STYLED_ITEM('color',(#302414),#33323); +#302414 = PRESENTATION_STYLE_ASSIGNMENT((#302415,#302420)); +#302415 = SURFACE_STYLE_USAGE(.BOTH.,#302416); +#302416 = SURFACE_SIDE_STYLE('',(#302417)); +#302417 = SURFACE_STYLE_FILL_AREA(#302418); +#302418 = FILL_AREA_STYLE('',(#302419)); +#302419 = FILL_AREA_STYLE_COLOUR('',#280691); +#302420 = CURVE_STYLE('',#302421,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302422 = STYLED_ITEM('color',(#302423),#33365); +#302423 = PRESENTATION_STYLE_ASSIGNMENT((#302424,#302429)); +#302424 = SURFACE_STYLE_USAGE(.BOTH.,#302425); +#302425 = SURFACE_SIDE_STYLE('',(#302426)); +#302426 = SURFACE_STYLE_FILL_AREA(#302427); +#302427 = FILL_AREA_STYLE('',(#302428)); +#302428 = FILL_AREA_STYLE_COLOUR('',#280691); +#302429 = CURVE_STYLE('',#302430,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302431 = STYLED_ITEM('color',(#302432),#33382); +#302432 = PRESENTATION_STYLE_ASSIGNMENT((#302433,#302438)); +#302433 = SURFACE_STYLE_USAGE(.BOTH.,#302434); +#302434 = SURFACE_SIDE_STYLE('',(#302435)); +#302435 = SURFACE_STYLE_FILL_AREA(#302436); +#302436 = FILL_AREA_STYLE('',(#302437)); +#302437 = FILL_AREA_STYLE_COLOUR('',#279624); +#302438 = CURVE_STYLE('',#302439,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302440 = OVER_RIDING_STYLED_ITEM('overriding color',(#302441),#33389, + #302431); +#302441 = PRESENTATION_STYLE_ASSIGNMENT((#302442,#302447)); +#302442 = SURFACE_STYLE_USAGE(.BOTH.,#302443); +#302443 = SURFACE_SIDE_STYLE('',(#302444)); +#302444 = SURFACE_STYLE_FILL_AREA(#302445); +#302445 = FILL_AREA_STYLE('',(#302446)); +#302446 = FILL_AREA_STYLE_COLOUR('',#280691); +#302447 = CURVE_STYLE('',#302448,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302449 = STYLED_ITEM('color',(#302450),#33399); +#302450 = PRESENTATION_STYLE_ASSIGNMENT((#302451,#302456)); +#302451 = SURFACE_STYLE_USAGE(.BOTH.,#302452); +#302452 = SURFACE_SIDE_STYLE('',(#302453)); +#302453 = SURFACE_STYLE_FILL_AREA(#302454); +#302454 = FILL_AREA_STYLE('',(#302455)); +#302455 = FILL_AREA_STYLE_COLOUR('',#279624); +#302456 = CURVE_STYLE('',#302457,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302458 = OVER_RIDING_STYLED_ITEM('overriding color',(#302459),#33404, + #302449); +#302459 = PRESENTATION_STYLE_ASSIGNMENT((#302460,#302465)); +#302460 = SURFACE_STYLE_USAGE(.BOTH.,#302461); +#302461 = SURFACE_SIDE_STYLE('',(#302462)); +#302462 = SURFACE_STYLE_FILL_AREA(#302463); +#302463 = FILL_AREA_STYLE('',(#302464)); +#302464 = FILL_AREA_STYLE_COLOUR('',#280691); +#302465 = CURVE_STYLE('',#302466,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302467 = STYLED_ITEM('color',(#302468),#33416); +#302468 = PRESENTATION_STYLE_ASSIGNMENT((#302469,#302474)); +#302469 = SURFACE_STYLE_USAGE(.BOTH.,#302470); +#302470 = SURFACE_SIDE_STYLE('',(#302471)); +#302471 = SURFACE_STYLE_FILL_AREA(#302472); +#302472 = FILL_AREA_STYLE('',(#302473)); +#302473 = FILL_AREA_STYLE_COLOUR('',#280691); +#302474 = CURVE_STYLE('',#302475,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302476 = STYLED_ITEM('color',(#302477),#33465); +#302477 = PRESENTATION_STYLE_ASSIGNMENT((#302478,#302483)); +#302478 = SURFACE_STYLE_USAGE(.BOTH.,#302479); +#302479 = SURFACE_SIDE_STYLE('',(#302480)); +#302480 = SURFACE_STYLE_FILL_AREA(#302481); +#302481 = FILL_AREA_STYLE('',(#302482)); +#302482 = FILL_AREA_STYLE_COLOUR('',#280691); +#302483 = CURVE_STYLE('',#302484,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302485 = STYLED_ITEM('color',(#302486),#33489); +#302486 = PRESENTATION_STYLE_ASSIGNMENT((#302487,#302492)); +#302487 = SURFACE_STYLE_USAGE(.BOTH.,#302488); +#302488 = SURFACE_SIDE_STYLE('',(#302489)); +#302489 = SURFACE_STYLE_FILL_AREA(#302490); +#302490 = FILL_AREA_STYLE('',(#302491)); +#302491 = FILL_AREA_STYLE_COLOUR('',#280691); +#302492 = CURVE_STYLE('',#302493,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302494 = STYLED_ITEM('color',(#302495),#33531); +#302495 = PRESENTATION_STYLE_ASSIGNMENT((#302496,#302501)); +#302496 = SURFACE_STYLE_USAGE(.BOTH.,#302497); +#302497 = SURFACE_SIDE_STYLE('',(#302498)); +#302498 = SURFACE_STYLE_FILL_AREA(#302499); +#302499 = FILL_AREA_STYLE('',(#302500)); +#302500 = FILL_AREA_STYLE_COLOUR('',#280691); +#302501 = CURVE_STYLE('',#302502,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302503 = STYLED_ITEM('color',(#302504),#33548); +#302504 = PRESENTATION_STYLE_ASSIGNMENT((#302505,#302510)); +#302505 = SURFACE_STYLE_USAGE(.BOTH.,#302506); +#302506 = SURFACE_SIDE_STYLE('',(#302507)); +#302507 = SURFACE_STYLE_FILL_AREA(#302508); +#302508 = FILL_AREA_STYLE('',(#302509)); +#302509 = FILL_AREA_STYLE_COLOUR('',#279624); +#302510 = CURVE_STYLE('',#302511,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302512 = OVER_RIDING_STYLED_ITEM('overriding color',(#302513),#33555, + #302503); +#302513 = PRESENTATION_STYLE_ASSIGNMENT((#302514,#302519)); +#302514 = SURFACE_STYLE_USAGE(.BOTH.,#302515); +#302515 = SURFACE_SIDE_STYLE('',(#302516)); +#302516 = SURFACE_STYLE_FILL_AREA(#302517); +#302517 = FILL_AREA_STYLE('',(#302518)); +#302518 = FILL_AREA_STYLE_COLOUR('',#280691); +#302519 = CURVE_STYLE('',#302520,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302521 = STYLED_ITEM('color',(#302522),#33565); +#302522 = PRESENTATION_STYLE_ASSIGNMENT((#302523,#302528)); +#302523 = SURFACE_STYLE_USAGE(.BOTH.,#302524); +#302524 = SURFACE_SIDE_STYLE('',(#302525)); +#302525 = SURFACE_STYLE_FILL_AREA(#302526); +#302526 = FILL_AREA_STYLE('',(#302527)); +#302527 = FILL_AREA_STYLE_COLOUR('',#279624); +#302528 = CURVE_STYLE('',#302529,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302530 = OVER_RIDING_STYLED_ITEM('overriding color',(#302531),#33570, + #302521); +#302531 = PRESENTATION_STYLE_ASSIGNMENT((#302532,#302537)); +#302532 = SURFACE_STYLE_USAGE(.BOTH.,#302533); +#302533 = SURFACE_SIDE_STYLE('',(#302534)); +#302534 = SURFACE_STYLE_FILL_AREA(#302535); +#302535 = FILL_AREA_STYLE('',(#302536)); +#302536 = FILL_AREA_STYLE_COLOUR('',#280691); +#302537 = CURVE_STYLE('',#302538,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302539 = STYLED_ITEM('color',(#302540),#33582); +#302540 = PRESENTATION_STYLE_ASSIGNMENT((#302541,#302546)); +#302541 = SURFACE_STYLE_USAGE(.BOTH.,#302542); +#302542 = SURFACE_SIDE_STYLE('',(#302543)); +#302543 = SURFACE_STYLE_FILL_AREA(#302544); +#302544 = FILL_AREA_STYLE('',(#302545)); +#302545 = FILL_AREA_STYLE_COLOUR('',#280691); +#302546 = CURVE_STYLE('',#302547,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302548 = STYLED_ITEM('color',(#302549),#33631); +#302549 = PRESENTATION_STYLE_ASSIGNMENT((#302550,#302555)); +#302550 = SURFACE_STYLE_USAGE(.BOTH.,#302551); +#302551 = SURFACE_SIDE_STYLE('',(#302552)); +#302552 = SURFACE_STYLE_FILL_AREA(#302553); +#302553 = FILL_AREA_STYLE('',(#302554)); +#302554 = FILL_AREA_STYLE_COLOUR('',#280691); +#302555 = CURVE_STYLE('',#302556,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302557 = STYLED_ITEM('color',(#302558),#33655); +#302558 = PRESENTATION_STYLE_ASSIGNMENT((#302559,#302564)); +#302559 = SURFACE_STYLE_USAGE(.BOTH.,#302560); +#302560 = SURFACE_SIDE_STYLE('',(#302561)); +#302561 = SURFACE_STYLE_FILL_AREA(#302562); +#302562 = FILL_AREA_STYLE('',(#302563)); +#302563 = FILL_AREA_STYLE_COLOUR('',#280691); +#302564 = CURVE_STYLE('',#302565,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302566 = STYLED_ITEM('color',(#302567),#33697); +#302567 = PRESENTATION_STYLE_ASSIGNMENT((#302568,#302573)); +#302568 = SURFACE_STYLE_USAGE(.BOTH.,#302569); +#302569 = SURFACE_SIDE_STYLE('',(#302570)); +#302570 = SURFACE_STYLE_FILL_AREA(#302571); +#302571 = FILL_AREA_STYLE('',(#302572)); +#302572 = FILL_AREA_STYLE_COLOUR('',#280691); +#302573 = CURVE_STYLE('',#302574,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302575 = STYLED_ITEM('color',(#302576),#33714); +#302576 = PRESENTATION_STYLE_ASSIGNMENT((#302577,#302582)); +#302577 = SURFACE_STYLE_USAGE(.BOTH.,#302578); +#302578 = SURFACE_SIDE_STYLE('',(#302579)); +#302579 = SURFACE_STYLE_FILL_AREA(#302580); +#302580 = FILL_AREA_STYLE('',(#302581)); +#302581 = FILL_AREA_STYLE_COLOUR('',#279624); +#302582 = CURVE_STYLE('',#302583,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302584 = OVER_RIDING_STYLED_ITEM('overriding color',(#302585),#33721, + #302575); +#302585 = PRESENTATION_STYLE_ASSIGNMENT((#302586,#302591)); +#302586 = SURFACE_STYLE_USAGE(.BOTH.,#302587); +#302587 = SURFACE_SIDE_STYLE('',(#302588)); +#302588 = SURFACE_STYLE_FILL_AREA(#302589); +#302589 = FILL_AREA_STYLE('',(#302590)); +#302590 = FILL_AREA_STYLE_COLOUR('',#280691); +#302591 = CURVE_STYLE('',#302592,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302593 = STYLED_ITEM('color',(#302594),#33731); +#302594 = PRESENTATION_STYLE_ASSIGNMENT((#302595,#302600)); +#302595 = SURFACE_STYLE_USAGE(.BOTH.,#302596); +#302596 = SURFACE_SIDE_STYLE('',(#302597)); +#302597 = SURFACE_STYLE_FILL_AREA(#302598); +#302598 = FILL_AREA_STYLE('',(#302599)); +#302599 = FILL_AREA_STYLE_COLOUR('',#279624); +#302600 = CURVE_STYLE('',#302601,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302602 = OVER_RIDING_STYLED_ITEM('overriding color',(#302603),#33736, + #302593); +#302603 = PRESENTATION_STYLE_ASSIGNMENT((#302604,#302609)); +#302604 = SURFACE_STYLE_USAGE(.BOTH.,#302605); +#302605 = SURFACE_SIDE_STYLE('',(#302606)); +#302606 = SURFACE_STYLE_FILL_AREA(#302607); +#302607 = FILL_AREA_STYLE('',(#302608)); +#302608 = FILL_AREA_STYLE_COLOUR('',#280691); +#302609 = CURVE_STYLE('',#302610,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302610 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302611 = STYLED_ITEM('color',(#302612),#33748); +#302612 = PRESENTATION_STYLE_ASSIGNMENT((#302613,#302618)); +#302613 = SURFACE_STYLE_USAGE(.BOTH.,#302614); +#302614 = SURFACE_SIDE_STYLE('',(#302615)); +#302615 = SURFACE_STYLE_FILL_AREA(#302616); +#302616 = FILL_AREA_STYLE('',(#302617)); +#302617 = FILL_AREA_STYLE_COLOUR('',#280691); +#302618 = CURVE_STYLE('',#302619,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302619 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302620 = STYLED_ITEM('color',(#302621),#33797); +#302621 = PRESENTATION_STYLE_ASSIGNMENT((#302622,#302627)); +#302622 = SURFACE_STYLE_USAGE(.BOTH.,#302623); +#302623 = SURFACE_SIDE_STYLE('',(#302624)); +#302624 = SURFACE_STYLE_FILL_AREA(#302625); +#302625 = FILL_AREA_STYLE('',(#302626)); +#302626 = FILL_AREA_STYLE_COLOUR('',#280691); +#302627 = CURVE_STYLE('',#302628,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302628 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302629 = STYLED_ITEM('color',(#302630),#33821); +#302630 = PRESENTATION_STYLE_ASSIGNMENT((#302631,#302636)); +#302631 = SURFACE_STYLE_USAGE(.BOTH.,#302632); +#302632 = SURFACE_SIDE_STYLE('',(#302633)); +#302633 = SURFACE_STYLE_FILL_AREA(#302634); +#302634 = FILL_AREA_STYLE('',(#302635)); +#302635 = FILL_AREA_STYLE_COLOUR('',#280691); +#302636 = CURVE_STYLE('',#302637,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302637 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302638 = STYLED_ITEM('color',(#302639),#33863); +#302639 = PRESENTATION_STYLE_ASSIGNMENT((#302640,#302645)); +#302640 = SURFACE_STYLE_USAGE(.BOTH.,#302641); +#302641 = SURFACE_SIDE_STYLE('',(#302642)); +#302642 = SURFACE_STYLE_FILL_AREA(#302643); +#302643 = FILL_AREA_STYLE('',(#302644)); +#302644 = FILL_AREA_STYLE_COLOUR('',#280691); +#302645 = CURVE_STYLE('',#302646,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302647 = STYLED_ITEM('color',(#302648),#33880); +#302648 = PRESENTATION_STYLE_ASSIGNMENT((#302649,#302654)); +#302649 = SURFACE_STYLE_USAGE(.BOTH.,#302650); +#302650 = SURFACE_SIDE_STYLE('',(#302651)); +#302651 = SURFACE_STYLE_FILL_AREA(#302652); +#302652 = FILL_AREA_STYLE('',(#302653)); +#302653 = FILL_AREA_STYLE_COLOUR('',#279624); +#302654 = CURVE_STYLE('',#302655,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302655 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302656 = OVER_RIDING_STYLED_ITEM('overriding color',(#302657),#33887, + #302647); +#302657 = PRESENTATION_STYLE_ASSIGNMENT((#302658,#302663)); +#302658 = SURFACE_STYLE_USAGE(.BOTH.,#302659); +#302659 = SURFACE_SIDE_STYLE('',(#302660)); +#302660 = SURFACE_STYLE_FILL_AREA(#302661); +#302661 = FILL_AREA_STYLE('',(#302662)); +#302662 = FILL_AREA_STYLE_COLOUR('',#280691); +#302663 = CURVE_STYLE('',#302664,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302664 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302665 = STYLED_ITEM('color',(#302666),#33897); +#302666 = PRESENTATION_STYLE_ASSIGNMENT((#302667,#302672)); +#302667 = SURFACE_STYLE_USAGE(.BOTH.,#302668); +#302668 = SURFACE_SIDE_STYLE('',(#302669)); +#302669 = SURFACE_STYLE_FILL_AREA(#302670); +#302670 = FILL_AREA_STYLE('',(#302671)); +#302671 = FILL_AREA_STYLE_COLOUR('',#279624); +#302672 = CURVE_STYLE('',#302673,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302673 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302674 = OVER_RIDING_STYLED_ITEM('overriding color',(#302675),#33902, + #302665); +#302675 = PRESENTATION_STYLE_ASSIGNMENT((#302676,#302681)); +#302676 = SURFACE_STYLE_USAGE(.BOTH.,#302677); +#302677 = SURFACE_SIDE_STYLE('',(#302678)); +#302678 = SURFACE_STYLE_FILL_AREA(#302679); +#302679 = FILL_AREA_STYLE('',(#302680)); +#302680 = FILL_AREA_STYLE_COLOUR('',#280691); +#302681 = CURVE_STYLE('',#302682,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302682 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302683 = STYLED_ITEM('color',(#302684),#33914); +#302684 = PRESENTATION_STYLE_ASSIGNMENT((#302685,#302690)); +#302685 = SURFACE_STYLE_USAGE(.BOTH.,#302686); +#302686 = SURFACE_SIDE_STYLE('',(#302687)); +#302687 = SURFACE_STYLE_FILL_AREA(#302688); +#302688 = FILL_AREA_STYLE('',(#302689)); +#302689 = FILL_AREA_STYLE_COLOUR('',#280691); +#302690 = CURVE_STYLE('',#302691,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302691 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302692 = STYLED_ITEM('color',(#302693),#33963); +#302693 = PRESENTATION_STYLE_ASSIGNMENT((#302694,#302699)); +#302694 = SURFACE_STYLE_USAGE(.BOTH.,#302695); +#302695 = SURFACE_SIDE_STYLE('',(#302696)); +#302696 = SURFACE_STYLE_FILL_AREA(#302697); +#302697 = FILL_AREA_STYLE('',(#302698)); +#302698 = FILL_AREA_STYLE_COLOUR('',#280691); +#302699 = CURVE_STYLE('',#302700,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302700 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302701 = STYLED_ITEM('color',(#302702),#33987); +#302702 = PRESENTATION_STYLE_ASSIGNMENT((#302703,#302708)); +#302703 = SURFACE_STYLE_USAGE(.BOTH.,#302704); +#302704 = SURFACE_SIDE_STYLE('',(#302705)); +#302705 = SURFACE_STYLE_FILL_AREA(#302706); +#302706 = FILL_AREA_STYLE('',(#302707)); +#302707 = FILL_AREA_STYLE_COLOUR('',#280691); +#302708 = CURVE_STYLE('',#302709,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302709 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302710 = STYLED_ITEM('color',(#302711),#34029); +#302711 = PRESENTATION_STYLE_ASSIGNMENT((#302712,#302717)); +#302712 = SURFACE_STYLE_USAGE(.BOTH.,#302713); +#302713 = SURFACE_SIDE_STYLE('',(#302714)); +#302714 = SURFACE_STYLE_FILL_AREA(#302715); +#302715 = FILL_AREA_STYLE('',(#302716)); +#302716 = FILL_AREA_STYLE_COLOUR('',#280691); +#302717 = CURVE_STYLE('',#302718,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302718 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302719 = STYLED_ITEM('color',(#302720),#34046); +#302720 = PRESENTATION_STYLE_ASSIGNMENT((#302721,#302726)); +#302721 = SURFACE_STYLE_USAGE(.BOTH.,#302722); +#302722 = SURFACE_SIDE_STYLE('',(#302723)); +#302723 = SURFACE_STYLE_FILL_AREA(#302724); +#302724 = FILL_AREA_STYLE('',(#302725)); +#302725 = FILL_AREA_STYLE_COLOUR('',#279624); +#302726 = CURVE_STYLE('',#302727,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302727 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302728 = OVER_RIDING_STYLED_ITEM('overriding color',(#302729),#34053, + #302719); +#302729 = PRESENTATION_STYLE_ASSIGNMENT((#302730,#302735)); +#302730 = SURFACE_STYLE_USAGE(.BOTH.,#302731); +#302731 = SURFACE_SIDE_STYLE('',(#302732)); +#302732 = SURFACE_STYLE_FILL_AREA(#302733); +#302733 = FILL_AREA_STYLE('',(#302734)); +#302734 = FILL_AREA_STYLE_COLOUR('',#280691); +#302735 = CURVE_STYLE('',#302736,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302736 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302737 = STYLED_ITEM('color',(#302738),#34063); +#302738 = PRESENTATION_STYLE_ASSIGNMENT((#302739,#302744)); +#302739 = SURFACE_STYLE_USAGE(.BOTH.,#302740); +#302740 = SURFACE_SIDE_STYLE('',(#302741)); +#302741 = SURFACE_STYLE_FILL_AREA(#302742); +#302742 = FILL_AREA_STYLE('',(#302743)); +#302743 = FILL_AREA_STYLE_COLOUR('',#279624); +#302744 = CURVE_STYLE('',#302745,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302745 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302746 = OVER_RIDING_STYLED_ITEM('overriding color',(#302747),#34068, + #302737); +#302747 = PRESENTATION_STYLE_ASSIGNMENT((#302748,#302753)); +#302748 = SURFACE_STYLE_USAGE(.BOTH.,#302749); +#302749 = SURFACE_SIDE_STYLE('',(#302750)); +#302750 = SURFACE_STYLE_FILL_AREA(#302751); +#302751 = FILL_AREA_STYLE('',(#302752)); +#302752 = FILL_AREA_STYLE_COLOUR('',#280691); +#302753 = CURVE_STYLE('',#302754,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302754 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302755 = STYLED_ITEM('color',(#302756),#34080); +#302756 = PRESENTATION_STYLE_ASSIGNMENT((#302757,#302762)); +#302757 = SURFACE_STYLE_USAGE(.BOTH.,#302758); +#302758 = SURFACE_SIDE_STYLE('',(#302759)); +#302759 = SURFACE_STYLE_FILL_AREA(#302760); +#302760 = FILL_AREA_STYLE('',(#302761)); +#302761 = FILL_AREA_STYLE_COLOUR('',#280691); +#302762 = CURVE_STYLE('',#302763,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302763 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302764 = STYLED_ITEM('color',(#302765),#34129); +#302765 = PRESENTATION_STYLE_ASSIGNMENT((#302766,#302771)); +#302766 = SURFACE_STYLE_USAGE(.BOTH.,#302767); +#302767 = SURFACE_SIDE_STYLE('',(#302768)); +#302768 = SURFACE_STYLE_FILL_AREA(#302769); +#302769 = FILL_AREA_STYLE('',(#302770)); +#302770 = FILL_AREA_STYLE_COLOUR('',#280691); +#302771 = CURVE_STYLE('',#302772,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302772 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302773 = STYLED_ITEM('color',(#302774),#34153); +#302774 = PRESENTATION_STYLE_ASSIGNMENT((#302775,#302780)); +#302775 = SURFACE_STYLE_USAGE(.BOTH.,#302776); +#302776 = SURFACE_SIDE_STYLE('',(#302777)); +#302777 = SURFACE_STYLE_FILL_AREA(#302778); +#302778 = FILL_AREA_STYLE('',(#302779)); +#302779 = FILL_AREA_STYLE_COLOUR('',#280691); +#302780 = CURVE_STYLE('',#302781,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302781 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302782 = STYLED_ITEM('color',(#302783),#34195); +#302783 = PRESENTATION_STYLE_ASSIGNMENT((#302784,#302789)); +#302784 = SURFACE_STYLE_USAGE(.BOTH.,#302785); +#302785 = SURFACE_SIDE_STYLE('',(#302786)); +#302786 = SURFACE_STYLE_FILL_AREA(#302787); +#302787 = FILL_AREA_STYLE('',(#302788)); +#302788 = FILL_AREA_STYLE_COLOUR('',#280691); +#302789 = CURVE_STYLE('',#302790,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302790 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302791 = STYLED_ITEM('color',(#302792),#34212); +#302792 = PRESENTATION_STYLE_ASSIGNMENT((#302793,#302798)); +#302793 = SURFACE_STYLE_USAGE(.BOTH.,#302794); +#302794 = SURFACE_SIDE_STYLE('',(#302795)); +#302795 = SURFACE_STYLE_FILL_AREA(#302796); +#302796 = FILL_AREA_STYLE('',(#302797)); +#302797 = FILL_AREA_STYLE_COLOUR('',#279624); +#302798 = CURVE_STYLE('',#302799,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302799 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302800 = OVER_RIDING_STYLED_ITEM('overriding color',(#302801),#34219, + #302791); +#302801 = PRESENTATION_STYLE_ASSIGNMENT((#302802,#302807)); +#302802 = SURFACE_STYLE_USAGE(.BOTH.,#302803); +#302803 = SURFACE_SIDE_STYLE('',(#302804)); +#302804 = SURFACE_STYLE_FILL_AREA(#302805); +#302805 = FILL_AREA_STYLE('',(#302806)); +#302806 = FILL_AREA_STYLE_COLOUR('',#280691); +#302807 = CURVE_STYLE('',#302808,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302808 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302809 = STYLED_ITEM('color',(#302810),#34229); +#302810 = PRESENTATION_STYLE_ASSIGNMENT((#302811,#302816)); +#302811 = SURFACE_STYLE_USAGE(.BOTH.,#302812); +#302812 = SURFACE_SIDE_STYLE('',(#302813)); +#302813 = SURFACE_STYLE_FILL_AREA(#302814); +#302814 = FILL_AREA_STYLE('',(#302815)); +#302815 = FILL_AREA_STYLE_COLOUR('',#279624); +#302816 = CURVE_STYLE('',#302817,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302817 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302818 = OVER_RIDING_STYLED_ITEM('overriding color',(#302819),#34234, + #302809); +#302819 = PRESENTATION_STYLE_ASSIGNMENT((#302820,#302825)); +#302820 = SURFACE_STYLE_USAGE(.BOTH.,#302821); +#302821 = SURFACE_SIDE_STYLE('',(#302822)); +#302822 = SURFACE_STYLE_FILL_AREA(#302823); +#302823 = FILL_AREA_STYLE('',(#302824)); +#302824 = FILL_AREA_STYLE_COLOUR('',#280691); +#302825 = CURVE_STYLE('',#302826,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302827 = STYLED_ITEM('color',(#302828),#34246); +#302828 = PRESENTATION_STYLE_ASSIGNMENT((#302829,#302834)); +#302829 = SURFACE_STYLE_USAGE(.BOTH.,#302830); +#302830 = SURFACE_SIDE_STYLE('',(#302831)); +#302831 = SURFACE_STYLE_FILL_AREA(#302832); +#302832 = FILL_AREA_STYLE('',(#302833)); +#302833 = FILL_AREA_STYLE_COLOUR('',#280691); +#302834 = CURVE_STYLE('',#302835,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302835 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302836 = STYLED_ITEM('color',(#302837),#34295); +#302837 = PRESENTATION_STYLE_ASSIGNMENT((#302838,#302843)); +#302838 = SURFACE_STYLE_USAGE(.BOTH.,#302839); +#302839 = SURFACE_SIDE_STYLE('',(#302840)); +#302840 = SURFACE_STYLE_FILL_AREA(#302841); +#302841 = FILL_AREA_STYLE('',(#302842)); +#302842 = FILL_AREA_STYLE_COLOUR('',#280691); +#302843 = CURVE_STYLE('',#302844,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302844 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302845 = STYLED_ITEM('color',(#302846),#34319); +#302846 = PRESENTATION_STYLE_ASSIGNMENT((#302847,#302852)); +#302847 = SURFACE_STYLE_USAGE(.BOTH.,#302848); +#302848 = SURFACE_SIDE_STYLE('',(#302849)); +#302849 = SURFACE_STYLE_FILL_AREA(#302850); +#302850 = FILL_AREA_STYLE('',(#302851)); +#302851 = FILL_AREA_STYLE_COLOUR('',#280691); +#302852 = CURVE_STYLE('',#302853,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302853 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302854 = STYLED_ITEM('color',(#302855),#34361); +#302855 = PRESENTATION_STYLE_ASSIGNMENT((#302856,#302861)); +#302856 = SURFACE_STYLE_USAGE(.BOTH.,#302857); +#302857 = SURFACE_SIDE_STYLE('',(#302858)); +#302858 = SURFACE_STYLE_FILL_AREA(#302859); +#302859 = FILL_AREA_STYLE('',(#302860)); +#302860 = FILL_AREA_STYLE_COLOUR('',#280691); +#302861 = CURVE_STYLE('',#302862,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302862 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302863 = STYLED_ITEM('color',(#302864),#34378); +#302864 = PRESENTATION_STYLE_ASSIGNMENT((#302865,#302870)); +#302865 = SURFACE_STYLE_USAGE(.BOTH.,#302866); +#302866 = SURFACE_SIDE_STYLE('',(#302867)); +#302867 = SURFACE_STYLE_FILL_AREA(#302868); +#302868 = FILL_AREA_STYLE('',(#302869)); +#302869 = FILL_AREA_STYLE_COLOUR('',#279624); +#302870 = CURVE_STYLE('',#302871,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302871 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302872 = OVER_RIDING_STYLED_ITEM('overriding color',(#302873),#34385, + #302863); +#302873 = PRESENTATION_STYLE_ASSIGNMENT((#302874,#302879)); +#302874 = SURFACE_STYLE_USAGE(.BOTH.,#302875); +#302875 = SURFACE_SIDE_STYLE('',(#302876)); +#302876 = SURFACE_STYLE_FILL_AREA(#302877); +#302877 = FILL_AREA_STYLE('',(#302878)); +#302878 = FILL_AREA_STYLE_COLOUR('',#280691); +#302879 = CURVE_STYLE('',#302880,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302880 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302881 = STYLED_ITEM('color',(#302882),#34395); +#302882 = PRESENTATION_STYLE_ASSIGNMENT((#302883,#302888)); +#302883 = SURFACE_STYLE_USAGE(.BOTH.,#302884); +#302884 = SURFACE_SIDE_STYLE('',(#302885)); +#302885 = SURFACE_STYLE_FILL_AREA(#302886); +#302886 = FILL_AREA_STYLE('',(#302887)); +#302887 = FILL_AREA_STYLE_COLOUR('',#279624); +#302888 = CURVE_STYLE('',#302889,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302889 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302890 = OVER_RIDING_STYLED_ITEM('overriding color',(#302891),#34400, + #302881); +#302891 = PRESENTATION_STYLE_ASSIGNMENT((#302892,#302897)); +#302892 = SURFACE_STYLE_USAGE(.BOTH.,#302893); +#302893 = SURFACE_SIDE_STYLE('',(#302894)); +#302894 = SURFACE_STYLE_FILL_AREA(#302895); +#302895 = FILL_AREA_STYLE('',(#302896)); +#302896 = FILL_AREA_STYLE_COLOUR('',#280691); +#302897 = CURVE_STYLE('',#302898,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302898 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302899 = STYLED_ITEM('color',(#302900),#34412); +#302900 = PRESENTATION_STYLE_ASSIGNMENT((#302901,#302906)); +#302901 = SURFACE_STYLE_USAGE(.BOTH.,#302902); +#302902 = SURFACE_SIDE_STYLE('',(#302903)); +#302903 = SURFACE_STYLE_FILL_AREA(#302904); +#302904 = FILL_AREA_STYLE('',(#302905)); +#302905 = FILL_AREA_STYLE_COLOUR('',#280691); +#302906 = CURVE_STYLE('',#302907,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302907 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302908 = STYLED_ITEM('color',(#302909),#34461); +#302909 = PRESENTATION_STYLE_ASSIGNMENT((#302910,#302915)); +#302910 = SURFACE_STYLE_USAGE(.BOTH.,#302911); +#302911 = SURFACE_SIDE_STYLE('',(#302912)); +#302912 = SURFACE_STYLE_FILL_AREA(#302913); +#302913 = FILL_AREA_STYLE('',(#302914)); +#302914 = FILL_AREA_STYLE_COLOUR('',#280691); +#302915 = CURVE_STYLE('',#302916,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302916 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302917 = STYLED_ITEM('color',(#302918),#34485); +#302918 = PRESENTATION_STYLE_ASSIGNMENT((#302919,#302924)); +#302919 = SURFACE_STYLE_USAGE(.BOTH.,#302920); +#302920 = SURFACE_SIDE_STYLE('',(#302921)); +#302921 = SURFACE_STYLE_FILL_AREA(#302922); +#302922 = FILL_AREA_STYLE('',(#302923)); +#302923 = FILL_AREA_STYLE_COLOUR('',#280691); +#302924 = CURVE_STYLE('',#302925,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302926 = STYLED_ITEM('color',(#302927),#34527); +#302927 = PRESENTATION_STYLE_ASSIGNMENT((#302928,#302933)); +#302928 = SURFACE_STYLE_USAGE(.BOTH.,#302929); +#302929 = SURFACE_SIDE_STYLE('',(#302930)); +#302930 = SURFACE_STYLE_FILL_AREA(#302931); +#302931 = FILL_AREA_STYLE('',(#302932)); +#302932 = FILL_AREA_STYLE_COLOUR('',#280691); +#302933 = CURVE_STYLE('',#302934,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302934 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302935 = STYLED_ITEM('color',(#302936),#34544); +#302936 = PRESENTATION_STYLE_ASSIGNMENT((#302937,#302942)); +#302937 = SURFACE_STYLE_USAGE(.BOTH.,#302938); +#302938 = SURFACE_SIDE_STYLE('',(#302939)); +#302939 = SURFACE_STYLE_FILL_AREA(#302940); +#302940 = FILL_AREA_STYLE('',(#302941)); +#302941 = FILL_AREA_STYLE_COLOUR('',#279624); +#302942 = CURVE_STYLE('',#302943,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302943 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302944 = OVER_RIDING_STYLED_ITEM('overriding color',(#302945),#34551, + #302935); +#302945 = PRESENTATION_STYLE_ASSIGNMENT((#302946,#302951)); +#302946 = SURFACE_STYLE_USAGE(.BOTH.,#302947); +#302947 = SURFACE_SIDE_STYLE('',(#302948)); +#302948 = SURFACE_STYLE_FILL_AREA(#302949); +#302949 = FILL_AREA_STYLE('',(#302950)); +#302950 = FILL_AREA_STYLE_COLOUR('',#280691); +#302951 = CURVE_STYLE('',#302952,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302952 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302953 = STYLED_ITEM('color',(#302954),#34561); +#302954 = PRESENTATION_STYLE_ASSIGNMENT((#302955,#302960)); +#302955 = SURFACE_STYLE_USAGE(.BOTH.,#302956); +#302956 = SURFACE_SIDE_STYLE('',(#302957)); +#302957 = SURFACE_STYLE_FILL_AREA(#302958); +#302958 = FILL_AREA_STYLE('',(#302959)); +#302959 = FILL_AREA_STYLE_COLOUR('',#279624); +#302960 = CURVE_STYLE('',#302961,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#302961 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302962 = OVER_RIDING_STYLED_ITEM('overriding color',(#302963),#34566, + #302953); +#302963 = PRESENTATION_STYLE_ASSIGNMENT((#302964,#302969)); +#302964 = SURFACE_STYLE_USAGE(.BOTH.,#302965); +#302965 = SURFACE_SIDE_STYLE('',(#302966)); +#302966 = SURFACE_STYLE_FILL_AREA(#302967); +#302967 = FILL_AREA_STYLE('',(#302968)); +#302968 = FILL_AREA_STYLE_COLOUR('',#280691); +#302969 = CURVE_STYLE('',#302970,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302970 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302971 = STYLED_ITEM('color',(#302972),#34578); +#302972 = PRESENTATION_STYLE_ASSIGNMENT((#302973,#302978)); +#302973 = SURFACE_STYLE_USAGE(.BOTH.,#302974); +#302974 = SURFACE_SIDE_STYLE('',(#302975)); +#302975 = SURFACE_STYLE_FILL_AREA(#302976); +#302976 = FILL_AREA_STYLE('',(#302977)); +#302977 = FILL_AREA_STYLE_COLOUR('',#280691); +#302978 = CURVE_STYLE('',#302979,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302980 = STYLED_ITEM('color',(#302981),#34627); +#302981 = PRESENTATION_STYLE_ASSIGNMENT((#302982,#302987)); +#302982 = SURFACE_STYLE_USAGE(.BOTH.,#302983); +#302983 = SURFACE_SIDE_STYLE('',(#302984)); +#302984 = SURFACE_STYLE_FILL_AREA(#302985); +#302985 = FILL_AREA_STYLE('',(#302986)); +#302986 = FILL_AREA_STYLE_COLOUR('',#280691); +#302987 = CURVE_STYLE('',#302988,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302988 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302989 = STYLED_ITEM('color',(#302990),#34651); +#302990 = PRESENTATION_STYLE_ASSIGNMENT((#302991,#302996)); +#302991 = SURFACE_STYLE_USAGE(.BOTH.,#302992); +#302992 = SURFACE_SIDE_STYLE('',(#302993)); +#302993 = SURFACE_STYLE_FILL_AREA(#302994); +#302994 = FILL_AREA_STYLE('',(#302995)); +#302995 = FILL_AREA_STYLE_COLOUR('',#280691); +#302996 = CURVE_STYLE('',#302997,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#302997 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302998 = STYLED_ITEM('color',(#302999),#34693); +#302999 = PRESENTATION_STYLE_ASSIGNMENT((#303000,#303005)); +#303000 = SURFACE_STYLE_USAGE(.BOTH.,#303001); +#303001 = SURFACE_SIDE_STYLE('',(#303002)); +#303002 = SURFACE_STYLE_FILL_AREA(#303003); +#303003 = FILL_AREA_STYLE('',(#303004)); +#303004 = FILL_AREA_STYLE_COLOUR('',#280691); +#303005 = CURVE_STYLE('',#303006,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303007 = STYLED_ITEM('color',(#303008),#34710); +#303008 = PRESENTATION_STYLE_ASSIGNMENT((#303009,#303014)); +#303009 = SURFACE_STYLE_USAGE(.BOTH.,#303010); +#303010 = SURFACE_SIDE_STYLE('',(#303011)); +#303011 = SURFACE_STYLE_FILL_AREA(#303012); +#303012 = FILL_AREA_STYLE('',(#303013)); +#303013 = FILL_AREA_STYLE_COLOUR('',#279624); +#303014 = CURVE_STYLE('',#303015,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#303015 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303016 = OVER_RIDING_STYLED_ITEM('overriding color',(#303017),#34717, + #303007); +#303017 = PRESENTATION_STYLE_ASSIGNMENT((#303018,#303023)); +#303018 = SURFACE_STYLE_USAGE(.BOTH.,#303019); +#303019 = SURFACE_SIDE_STYLE('',(#303020)); +#303020 = SURFACE_STYLE_FILL_AREA(#303021); +#303021 = FILL_AREA_STYLE('',(#303022)); +#303022 = FILL_AREA_STYLE_COLOUR('',#280691); +#303023 = CURVE_STYLE('',#303024,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303024 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303025 = STYLED_ITEM('color',(#303026),#34727); +#303026 = PRESENTATION_STYLE_ASSIGNMENT((#303027,#303032)); +#303027 = SURFACE_STYLE_USAGE(.BOTH.,#303028); +#303028 = SURFACE_SIDE_STYLE('',(#303029)); +#303029 = SURFACE_STYLE_FILL_AREA(#303030); +#303030 = FILL_AREA_STYLE('',(#303031)); +#303031 = FILL_AREA_STYLE_COLOUR('',#279624); +#303032 = CURVE_STYLE('',#303033,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#303033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303034 = OVER_RIDING_STYLED_ITEM('overriding color',(#303035),#34732, + #303025); +#303035 = PRESENTATION_STYLE_ASSIGNMENT((#303036,#303041)); +#303036 = SURFACE_STYLE_USAGE(.BOTH.,#303037); +#303037 = SURFACE_SIDE_STYLE('',(#303038)); +#303038 = SURFACE_STYLE_FILL_AREA(#303039); +#303039 = FILL_AREA_STYLE('',(#303040)); +#303040 = FILL_AREA_STYLE_COLOUR('',#280691); +#303041 = CURVE_STYLE('',#303042,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303042 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303043 = STYLED_ITEM('color',(#303044),#34744); +#303044 = PRESENTATION_STYLE_ASSIGNMENT((#303045,#303050)); +#303045 = SURFACE_STYLE_USAGE(.BOTH.,#303046); +#303046 = SURFACE_SIDE_STYLE('',(#303047)); +#303047 = SURFACE_STYLE_FILL_AREA(#303048); +#303048 = FILL_AREA_STYLE('',(#303049)); +#303049 = FILL_AREA_STYLE_COLOUR('',#280691); +#303050 = CURVE_STYLE('',#303051,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303051 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303052 = STYLED_ITEM('color',(#303053),#34793); +#303053 = PRESENTATION_STYLE_ASSIGNMENT((#303054,#303059)); +#303054 = SURFACE_STYLE_USAGE(.BOTH.,#303055); +#303055 = SURFACE_SIDE_STYLE('',(#303056)); +#303056 = SURFACE_STYLE_FILL_AREA(#303057); +#303057 = FILL_AREA_STYLE('',(#303058)); +#303058 = FILL_AREA_STYLE_COLOUR('',#280691); +#303059 = CURVE_STYLE('',#303060,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303060 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303061 = STYLED_ITEM('color',(#303062),#34817); +#303062 = PRESENTATION_STYLE_ASSIGNMENT((#303063,#303068)); +#303063 = SURFACE_STYLE_USAGE(.BOTH.,#303064); +#303064 = SURFACE_SIDE_STYLE('',(#303065)); +#303065 = SURFACE_STYLE_FILL_AREA(#303066); +#303066 = FILL_AREA_STYLE('',(#303067)); +#303067 = FILL_AREA_STYLE_COLOUR('',#280691); +#303068 = CURVE_STYLE('',#303069,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303069 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303070 = STYLED_ITEM('color',(#303071),#34859); +#303071 = PRESENTATION_STYLE_ASSIGNMENT((#303072,#303077)); +#303072 = SURFACE_STYLE_USAGE(.BOTH.,#303073); +#303073 = SURFACE_SIDE_STYLE('',(#303074)); +#303074 = SURFACE_STYLE_FILL_AREA(#303075); +#303075 = FILL_AREA_STYLE('',(#303076)); +#303076 = FILL_AREA_STYLE_COLOUR('',#280691); +#303077 = CURVE_STYLE('',#303078,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303078 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303079 = STYLED_ITEM('color',(#303080),#34876); +#303080 = PRESENTATION_STYLE_ASSIGNMENT((#303081,#303086)); +#303081 = SURFACE_STYLE_USAGE(.BOTH.,#303082); +#303082 = SURFACE_SIDE_STYLE('',(#303083)); +#303083 = SURFACE_STYLE_FILL_AREA(#303084); +#303084 = FILL_AREA_STYLE('',(#303085)); +#303085 = FILL_AREA_STYLE_COLOUR('',#279624); +#303086 = CURVE_STYLE('',#303087,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#303087 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303088 = OVER_RIDING_STYLED_ITEM('overriding color',(#303089),#34883, + #303079); +#303089 = PRESENTATION_STYLE_ASSIGNMENT((#303090,#303095)); +#303090 = SURFACE_STYLE_USAGE(.BOTH.,#303091); +#303091 = SURFACE_SIDE_STYLE('',(#303092)); +#303092 = SURFACE_STYLE_FILL_AREA(#303093); +#303093 = FILL_AREA_STYLE('',(#303094)); +#303094 = FILL_AREA_STYLE_COLOUR('',#280691); +#303095 = CURVE_STYLE('',#303096,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303096 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303097 = STYLED_ITEM('color',(#303098),#34893); +#303098 = PRESENTATION_STYLE_ASSIGNMENT((#303099,#303104)); +#303099 = SURFACE_STYLE_USAGE(.BOTH.,#303100); +#303100 = SURFACE_SIDE_STYLE('',(#303101)); +#303101 = SURFACE_STYLE_FILL_AREA(#303102); +#303102 = FILL_AREA_STYLE('',(#303103)); +#303103 = FILL_AREA_STYLE_COLOUR('',#279624); +#303104 = CURVE_STYLE('',#303105,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#303105 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303106 = OVER_RIDING_STYLED_ITEM('overriding color',(#303107),#34898, + #303097); +#303107 = PRESENTATION_STYLE_ASSIGNMENT((#303108,#303113)); +#303108 = SURFACE_STYLE_USAGE(.BOTH.,#303109); +#303109 = SURFACE_SIDE_STYLE('',(#303110)); +#303110 = SURFACE_STYLE_FILL_AREA(#303111); +#303111 = FILL_AREA_STYLE('',(#303112)); +#303112 = FILL_AREA_STYLE_COLOUR('',#280691); +#303113 = CURVE_STYLE('',#303114,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303114 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303115 = STYLED_ITEM('color',(#303116),#34910); +#303116 = PRESENTATION_STYLE_ASSIGNMENT((#303117,#303122)); +#303117 = SURFACE_STYLE_USAGE(.BOTH.,#303118); +#303118 = SURFACE_SIDE_STYLE('',(#303119)); +#303119 = SURFACE_STYLE_FILL_AREA(#303120); +#303120 = FILL_AREA_STYLE('',(#303121)); +#303121 = FILL_AREA_STYLE_COLOUR('',#280691); +#303122 = CURVE_STYLE('',#303123,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303123 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303124 = STYLED_ITEM('color',(#303125),#34959); +#303125 = PRESENTATION_STYLE_ASSIGNMENT((#303126,#303131)); +#303126 = SURFACE_STYLE_USAGE(.BOTH.,#303127); +#303127 = SURFACE_SIDE_STYLE('',(#303128)); +#303128 = SURFACE_STYLE_FILL_AREA(#303129); +#303129 = FILL_AREA_STYLE('',(#303130)); +#303130 = FILL_AREA_STYLE_COLOUR('',#280691); +#303131 = CURVE_STYLE('',#303132,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303132 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303133 = STYLED_ITEM('color',(#303134),#34983); +#303134 = PRESENTATION_STYLE_ASSIGNMENT((#303135,#303140)); +#303135 = SURFACE_STYLE_USAGE(.BOTH.,#303136); +#303136 = SURFACE_SIDE_STYLE('',(#303137)); +#303137 = SURFACE_STYLE_FILL_AREA(#303138); +#303138 = FILL_AREA_STYLE('',(#303139)); +#303139 = FILL_AREA_STYLE_COLOUR('',#280691); +#303140 = CURVE_STYLE('',#303141,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303141 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303142 = STYLED_ITEM('color',(#303143),#35025); +#303143 = PRESENTATION_STYLE_ASSIGNMENT((#303144,#303149)); +#303144 = SURFACE_STYLE_USAGE(.BOTH.,#303145); +#303145 = SURFACE_SIDE_STYLE('',(#303146)); +#303146 = SURFACE_STYLE_FILL_AREA(#303147); +#303147 = FILL_AREA_STYLE('',(#303148)); +#303148 = FILL_AREA_STYLE_COLOUR('',#280691); +#303149 = CURVE_STYLE('',#303150,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303150 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303151 = STYLED_ITEM('color',(#303152),#35042); +#303152 = PRESENTATION_STYLE_ASSIGNMENT((#303153,#303158)); +#303153 = SURFACE_STYLE_USAGE(.BOTH.,#303154); +#303154 = SURFACE_SIDE_STYLE('',(#303155)); +#303155 = SURFACE_STYLE_FILL_AREA(#303156); +#303156 = FILL_AREA_STYLE('',(#303157)); +#303157 = FILL_AREA_STYLE_COLOUR('',#279624); +#303158 = CURVE_STYLE('',#303159,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#303159 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303160 = OVER_RIDING_STYLED_ITEM('overriding color',(#303161),#35049, + #303151); +#303161 = PRESENTATION_STYLE_ASSIGNMENT((#303162,#303167)); +#303162 = SURFACE_STYLE_USAGE(.BOTH.,#303163); +#303163 = SURFACE_SIDE_STYLE('',(#303164)); +#303164 = SURFACE_STYLE_FILL_AREA(#303165); +#303165 = FILL_AREA_STYLE('',(#303166)); +#303166 = FILL_AREA_STYLE_COLOUR('',#280691); +#303167 = CURVE_STYLE('',#303168,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303168 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303169 = STYLED_ITEM('color',(#303170),#35059); +#303170 = PRESENTATION_STYLE_ASSIGNMENT((#303171,#303176)); +#303171 = SURFACE_STYLE_USAGE(.BOTH.,#303172); +#303172 = SURFACE_SIDE_STYLE('',(#303173)); +#303173 = SURFACE_STYLE_FILL_AREA(#303174); +#303174 = FILL_AREA_STYLE('',(#303175)); +#303175 = FILL_AREA_STYLE_COLOUR('',#279624); +#303176 = CURVE_STYLE('',#303177,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#303177 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303178 = OVER_RIDING_STYLED_ITEM('overriding color',(#303179),#35064, + #303169); +#303179 = PRESENTATION_STYLE_ASSIGNMENT((#303180,#303185)); +#303180 = SURFACE_STYLE_USAGE(.BOTH.,#303181); +#303181 = SURFACE_SIDE_STYLE('',(#303182)); +#303182 = SURFACE_STYLE_FILL_AREA(#303183); +#303183 = FILL_AREA_STYLE('',(#303184)); +#303184 = FILL_AREA_STYLE_COLOUR('',#280691); +#303185 = CURVE_STYLE('',#303186,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303186 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303187 = STYLED_ITEM('color',(#303188),#35076); +#303188 = PRESENTATION_STYLE_ASSIGNMENT((#303189,#303194)); +#303189 = SURFACE_STYLE_USAGE(.BOTH.,#303190); +#303190 = SURFACE_SIDE_STYLE('',(#303191)); +#303191 = SURFACE_STYLE_FILL_AREA(#303192); +#303192 = FILL_AREA_STYLE('',(#303193)); +#303193 = FILL_AREA_STYLE_COLOUR('',#280691); +#303194 = CURVE_STYLE('',#303195,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303195 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303196 = STYLED_ITEM('color',(#303197),#35125); +#303197 = PRESENTATION_STYLE_ASSIGNMENT((#303198,#303203)); +#303198 = SURFACE_STYLE_USAGE(.BOTH.,#303199); +#303199 = SURFACE_SIDE_STYLE('',(#303200)); +#303200 = SURFACE_STYLE_FILL_AREA(#303201); +#303201 = FILL_AREA_STYLE('',(#303202)); +#303202 = FILL_AREA_STYLE_COLOUR('',#280691); +#303203 = CURVE_STYLE('',#303204,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303204 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303205 = STYLED_ITEM('color',(#303206),#35149); +#303206 = PRESENTATION_STYLE_ASSIGNMENT((#303207,#303212)); +#303207 = SURFACE_STYLE_USAGE(.BOTH.,#303208); +#303208 = SURFACE_SIDE_STYLE('',(#303209)); +#303209 = SURFACE_STYLE_FILL_AREA(#303210); +#303210 = FILL_AREA_STYLE('',(#303211)); +#303211 = FILL_AREA_STYLE_COLOUR('',#280691); +#303212 = CURVE_STYLE('',#303213,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303213 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303214 = STYLED_ITEM('color',(#303215),#35191); +#303215 = PRESENTATION_STYLE_ASSIGNMENT((#303216,#303221)); +#303216 = SURFACE_STYLE_USAGE(.BOTH.,#303217); +#303217 = SURFACE_SIDE_STYLE('',(#303218)); +#303218 = SURFACE_STYLE_FILL_AREA(#303219); +#303219 = FILL_AREA_STYLE('',(#303220)); +#303220 = FILL_AREA_STYLE_COLOUR('',#280691); +#303221 = CURVE_STYLE('',#303222,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303222 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303223 = STYLED_ITEM('color',(#303224),#35208); +#303224 = PRESENTATION_STYLE_ASSIGNMENT((#303225,#303230)); +#303225 = SURFACE_STYLE_USAGE(.BOTH.,#303226); +#303226 = SURFACE_SIDE_STYLE('',(#303227)); +#303227 = SURFACE_STYLE_FILL_AREA(#303228); +#303228 = FILL_AREA_STYLE('',(#303229)); +#303229 = FILL_AREA_STYLE_COLOUR('',#280691); +#303230 = CURVE_STYLE('',#303231,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303231 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303232 = STYLED_ITEM('color',(#303233),#35225); +#303233 = PRESENTATION_STYLE_ASSIGNMENT((#303234,#303239)); +#303234 = SURFACE_STYLE_USAGE(.BOTH.,#303235); +#303235 = SURFACE_SIDE_STYLE('',(#303236)); +#303236 = SURFACE_STYLE_FILL_AREA(#303237); +#303237 = FILL_AREA_STYLE('',(#303238)); +#303238 = FILL_AREA_STYLE_COLOUR('',#280691); +#303239 = CURVE_STYLE('',#303240,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303240 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303241 = STYLED_ITEM('color',(#303242),#35242); +#303242 = PRESENTATION_STYLE_ASSIGNMENT((#303243,#303248)); +#303243 = SURFACE_STYLE_USAGE(.BOTH.,#303244); +#303244 = SURFACE_SIDE_STYLE('',(#303245)); +#303245 = SURFACE_STYLE_FILL_AREA(#303246); +#303246 = FILL_AREA_STYLE('',(#303247)); +#303247 = FILL_AREA_STYLE_COLOUR('',#280691); +#303248 = CURVE_STYLE('',#303249,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303249 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303250 = STYLED_ITEM('color',(#303251),#35254); +#303251 = PRESENTATION_STYLE_ASSIGNMENT((#303252,#303257)); +#303252 = SURFACE_STYLE_USAGE(.BOTH.,#303253); +#303253 = SURFACE_SIDE_STYLE('',(#303254)); +#303254 = SURFACE_STYLE_FILL_AREA(#303255); +#303255 = FILL_AREA_STYLE('',(#303256)); +#303256 = FILL_AREA_STYLE_COLOUR('',#280691); +#303257 = CURVE_STYLE('',#303258,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303258 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303259 = STYLED_ITEM('color',(#303260),#35271); +#303260 = PRESENTATION_STYLE_ASSIGNMENT((#303261,#303266)); +#303261 = SURFACE_STYLE_USAGE(.BOTH.,#303262); +#303262 = SURFACE_SIDE_STYLE('',(#303263)); +#303263 = SURFACE_STYLE_FILL_AREA(#303264); +#303264 = FILL_AREA_STYLE('',(#303265)); +#303265 = FILL_AREA_STYLE_COLOUR('',#280691); +#303266 = CURVE_STYLE('',#303267,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303267 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303268 = STYLED_ITEM('color',(#303269),#35288); +#303269 = PRESENTATION_STYLE_ASSIGNMENT((#303270,#303275)); +#303270 = SURFACE_STYLE_USAGE(.BOTH.,#303271); +#303271 = SURFACE_SIDE_STYLE('',(#303272)); +#303272 = SURFACE_STYLE_FILL_AREA(#303273); +#303273 = FILL_AREA_STYLE('',(#303274)); +#303274 = FILL_AREA_STYLE_COLOUR('',#280691); +#303275 = CURVE_STYLE('',#303276,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303276 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303277 = STYLED_ITEM('color',(#303278),#35300); +#303278 = PRESENTATION_STYLE_ASSIGNMENT((#303279,#303284)); +#303279 = SURFACE_STYLE_USAGE(.BOTH.,#303280); +#303280 = SURFACE_SIDE_STYLE('',(#303281)); +#303281 = SURFACE_STYLE_FILL_AREA(#303282); +#303282 = FILL_AREA_STYLE('',(#303283)); +#303283 = FILL_AREA_STYLE_COLOUR('',#280691); +#303284 = CURVE_STYLE('',#303285,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303285 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303286 = STYLED_ITEM('color',(#303287),#35317); +#303287 = PRESENTATION_STYLE_ASSIGNMENT((#303288,#303293)); +#303288 = SURFACE_STYLE_USAGE(.BOTH.,#303289); +#303289 = SURFACE_SIDE_STYLE('',(#303290)); +#303290 = SURFACE_STYLE_FILL_AREA(#303291); +#303291 = FILL_AREA_STYLE('',(#303292)); +#303292 = FILL_AREA_STYLE_COLOUR('',#280691); +#303293 = CURVE_STYLE('',#303294,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303294 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303295 = STYLED_ITEM('color',(#303296),#35334); +#303296 = PRESENTATION_STYLE_ASSIGNMENT((#303297,#303302)); +#303297 = SURFACE_STYLE_USAGE(.BOTH.,#303298); +#303298 = SURFACE_SIDE_STYLE('',(#303299)); +#303299 = SURFACE_STYLE_FILL_AREA(#303300); +#303300 = FILL_AREA_STYLE('',(#303301)); +#303301 = FILL_AREA_STYLE_COLOUR('',#280691); +#303302 = CURVE_STYLE('',#303303,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303303 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303304 = STYLED_ITEM('color',(#303305),#35346); +#303305 = PRESENTATION_STYLE_ASSIGNMENT((#303306,#303311)); +#303306 = SURFACE_STYLE_USAGE(.BOTH.,#303307); +#303307 = SURFACE_SIDE_STYLE('',(#303308)); +#303308 = SURFACE_STYLE_FILL_AREA(#303309); +#303309 = FILL_AREA_STYLE('',(#303310)); +#303310 = FILL_AREA_STYLE_COLOUR('',#280691); +#303311 = CURVE_STYLE('',#303312,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303312 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303313 = STYLED_ITEM('color',(#303314),#35363); +#303314 = PRESENTATION_STYLE_ASSIGNMENT((#303315,#303320)); +#303315 = SURFACE_STYLE_USAGE(.BOTH.,#303316); +#303316 = SURFACE_SIDE_STYLE('',(#303317)); +#303317 = SURFACE_STYLE_FILL_AREA(#303318); +#303318 = FILL_AREA_STYLE('',(#303319)); +#303319 = FILL_AREA_STYLE_COLOUR('',#280691); +#303320 = CURVE_STYLE('',#303321,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303321 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303322 = STYLED_ITEM('color',(#303323),#35380); +#303323 = PRESENTATION_STYLE_ASSIGNMENT((#303324,#303329)); +#303324 = SURFACE_STYLE_USAGE(.BOTH.,#303325); +#303325 = SURFACE_SIDE_STYLE('',(#303326)); +#303326 = SURFACE_STYLE_FILL_AREA(#303327); +#303327 = FILL_AREA_STYLE('',(#303328)); +#303328 = FILL_AREA_STYLE_COLOUR('',#280691); +#303329 = CURVE_STYLE('',#303330,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303330 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303331 = STYLED_ITEM('color',(#303332),#35392); +#303332 = PRESENTATION_STYLE_ASSIGNMENT((#303333,#303338)); +#303333 = SURFACE_STYLE_USAGE(.BOTH.,#303334); +#303334 = SURFACE_SIDE_STYLE('',(#303335)); +#303335 = SURFACE_STYLE_FILL_AREA(#303336); +#303336 = FILL_AREA_STYLE('',(#303337)); +#303337 = FILL_AREA_STYLE_COLOUR('',#280691); +#303338 = CURVE_STYLE('',#303339,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303339 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303340 = STYLED_ITEM('color',(#303341),#35409); +#303341 = PRESENTATION_STYLE_ASSIGNMENT((#303342,#303347)); +#303342 = SURFACE_STYLE_USAGE(.BOTH.,#303343); +#303343 = SURFACE_SIDE_STYLE('',(#303344)); +#303344 = SURFACE_STYLE_FILL_AREA(#303345); +#303345 = FILL_AREA_STYLE('',(#303346)); +#303346 = FILL_AREA_STYLE_COLOUR('',#280691); +#303347 = CURVE_STYLE('',#303348,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303348 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303349 = STYLED_ITEM('color',(#303350),#35426); +#303350 = PRESENTATION_STYLE_ASSIGNMENT((#303351,#303356)); +#303351 = SURFACE_STYLE_USAGE(.BOTH.,#303352); +#303352 = SURFACE_SIDE_STYLE('',(#303353)); +#303353 = SURFACE_STYLE_FILL_AREA(#303354); +#303354 = FILL_AREA_STYLE('',(#303355)); +#303355 = FILL_AREA_STYLE_COLOUR('',#280691); +#303356 = CURVE_STYLE('',#303357,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303357 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303358 = STYLED_ITEM('color',(#303359),#35438); +#303359 = PRESENTATION_STYLE_ASSIGNMENT((#303360,#303365)); +#303360 = SURFACE_STYLE_USAGE(.BOTH.,#303361); +#303361 = SURFACE_SIDE_STYLE('',(#303362)); +#303362 = SURFACE_STYLE_FILL_AREA(#303363); +#303363 = FILL_AREA_STYLE('',(#303364)); +#303364 = FILL_AREA_STYLE_COLOUR('',#280691); +#303365 = CURVE_STYLE('',#303366,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303366 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303367 = STYLED_ITEM('color',(#303368),#35455); +#303368 = PRESENTATION_STYLE_ASSIGNMENT((#303369,#303374)); +#303369 = SURFACE_STYLE_USAGE(.BOTH.,#303370); +#303370 = SURFACE_SIDE_STYLE('',(#303371)); +#303371 = SURFACE_STYLE_FILL_AREA(#303372); +#303372 = FILL_AREA_STYLE('',(#303373)); +#303373 = FILL_AREA_STYLE_COLOUR('',#280691); +#303374 = CURVE_STYLE('',#303375,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303375 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303376 = STYLED_ITEM('color',(#303377),#35472); +#303377 = PRESENTATION_STYLE_ASSIGNMENT((#303378,#303383)); +#303378 = SURFACE_STYLE_USAGE(.BOTH.,#303379); +#303379 = SURFACE_SIDE_STYLE('',(#303380)); +#303380 = SURFACE_STYLE_FILL_AREA(#303381); +#303381 = FILL_AREA_STYLE('',(#303382)); +#303382 = FILL_AREA_STYLE_COLOUR('',#280691); +#303383 = CURVE_STYLE('',#303384,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303384 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303385 = STYLED_ITEM('color',(#303386),#35484); +#303386 = PRESENTATION_STYLE_ASSIGNMENT((#303387,#303392)); +#303387 = SURFACE_STYLE_USAGE(.BOTH.,#303388); +#303388 = SURFACE_SIDE_STYLE('',(#303389)); +#303389 = SURFACE_STYLE_FILL_AREA(#303390); +#303390 = FILL_AREA_STYLE('',(#303391)); +#303391 = FILL_AREA_STYLE_COLOUR('',#280691); +#303392 = CURVE_STYLE('',#303393,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303393 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303394 = STYLED_ITEM('color',(#303395),#35501); +#303395 = PRESENTATION_STYLE_ASSIGNMENT((#303396,#303401)); +#303396 = SURFACE_STYLE_USAGE(.BOTH.,#303397); +#303397 = SURFACE_SIDE_STYLE('',(#303398)); +#303398 = SURFACE_STYLE_FILL_AREA(#303399); +#303399 = FILL_AREA_STYLE('',(#303400)); +#303400 = FILL_AREA_STYLE_COLOUR('',#280691); +#303401 = CURVE_STYLE('',#303402,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303402 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303403 = STYLED_ITEM('color',(#303404),#35518); +#303404 = PRESENTATION_STYLE_ASSIGNMENT((#303405,#303410)); +#303405 = SURFACE_STYLE_USAGE(.BOTH.,#303406); +#303406 = SURFACE_SIDE_STYLE('',(#303407)); +#303407 = SURFACE_STYLE_FILL_AREA(#303408); +#303408 = FILL_AREA_STYLE('',(#303409)); +#303409 = FILL_AREA_STYLE_COLOUR('',#280691); +#303410 = CURVE_STYLE('',#303411,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303411 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303412 = STYLED_ITEM('color',(#303413),#35530); +#303413 = PRESENTATION_STYLE_ASSIGNMENT((#303414,#303419)); +#303414 = SURFACE_STYLE_USAGE(.BOTH.,#303415); +#303415 = SURFACE_SIDE_STYLE('',(#303416)); +#303416 = SURFACE_STYLE_FILL_AREA(#303417); +#303417 = FILL_AREA_STYLE('',(#303418)); +#303418 = FILL_AREA_STYLE_COLOUR('',#280691); +#303419 = CURVE_STYLE('',#303420,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303420 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303421 = STYLED_ITEM('color',(#303422),#35547); +#303422 = PRESENTATION_STYLE_ASSIGNMENT((#303423,#303428)); +#303423 = SURFACE_STYLE_USAGE(.BOTH.,#303424); +#303424 = SURFACE_SIDE_STYLE('',(#303425)); +#303425 = SURFACE_STYLE_FILL_AREA(#303426); +#303426 = FILL_AREA_STYLE('',(#303427)); +#303427 = FILL_AREA_STYLE_COLOUR('',#280691); +#303428 = CURVE_STYLE('',#303429,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303429 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303430 = STYLED_ITEM('color',(#303431),#35564); +#303431 = PRESENTATION_STYLE_ASSIGNMENT((#303432,#303437)); +#303432 = SURFACE_STYLE_USAGE(.BOTH.,#303433); +#303433 = SURFACE_SIDE_STYLE('',(#303434)); +#303434 = SURFACE_STYLE_FILL_AREA(#303435); +#303435 = FILL_AREA_STYLE('',(#303436)); +#303436 = FILL_AREA_STYLE_COLOUR('',#280691); +#303437 = CURVE_STYLE('',#303438,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303438 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303439 = STYLED_ITEM('color',(#303440),#35576); +#303440 = PRESENTATION_STYLE_ASSIGNMENT((#303441,#303446)); +#303441 = SURFACE_STYLE_USAGE(.BOTH.,#303442); +#303442 = SURFACE_SIDE_STYLE('',(#303443)); +#303443 = SURFACE_STYLE_FILL_AREA(#303444); +#303444 = FILL_AREA_STYLE('',(#303445)); +#303445 = FILL_AREA_STYLE_COLOUR('',#280691); +#303446 = CURVE_STYLE('',#303447,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303447 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303448 = STYLED_ITEM('color',(#303449),#35593); +#303449 = PRESENTATION_STYLE_ASSIGNMENT((#303450,#303455)); +#303450 = SURFACE_STYLE_USAGE(.BOTH.,#303451); +#303451 = SURFACE_SIDE_STYLE('',(#303452)); +#303452 = SURFACE_STYLE_FILL_AREA(#303453); +#303453 = FILL_AREA_STYLE('',(#303454)); +#303454 = FILL_AREA_STYLE_COLOUR('',#280691); +#303455 = CURVE_STYLE('',#303456,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303456 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303457 = STYLED_ITEM('color',(#303458),#35610); +#303458 = PRESENTATION_STYLE_ASSIGNMENT((#303459,#303464)); +#303459 = SURFACE_STYLE_USAGE(.BOTH.,#303460); +#303460 = SURFACE_SIDE_STYLE('',(#303461)); +#303461 = SURFACE_STYLE_FILL_AREA(#303462); +#303462 = FILL_AREA_STYLE('',(#303463)); +#303463 = FILL_AREA_STYLE_COLOUR('',#280691); +#303464 = CURVE_STYLE('',#303465,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303465 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303466 = STYLED_ITEM('color',(#303467),#35622); +#303467 = PRESENTATION_STYLE_ASSIGNMENT((#303468,#303473)); +#303468 = SURFACE_STYLE_USAGE(.BOTH.,#303469); +#303469 = SURFACE_SIDE_STYLE('',(#303470)); +#303470 = SURFACE_STYLE_FILL_AREA(#303471); +#303471 = FILL_AREA_STYLE('',(#303472)); +#303472 = FILL_AREA_STYLE_COLOUR('',#280691); +#303473 = CURVE_STYLE('',#303474,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303474 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303475 = STYLED_ITEM('color',(#303476),#35639); +#303476 = PRESENTATION_STYLE_ASSIGNMENT((#303477,#303482)); +#303477 = SURFACE_STYLE_USAGE(.BOTH.,#303478); +#303478 = SURFACE_SIDE_STYLE('',(#303479)); +#303479 = SURFACE_STYLE_FILL_AREA(#303480); +#303480 = FILL_AREA_STYLE('',(#303481)); +#303481 = FILL_AREA_STYLE_COLOUR('',#280691); +#303482 = CURVE_STYLE('',#303483,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303483 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303484 = STYLED_ITEM('color',(#303485),#35656); +#303485 = PRESENTATION_STYLE_ASSIGNMENT((#303486,#303491)); +#303486 = SURFACE_STYLE_USAGE(.BOTH.,#303487); +#303487 = SURFACE_SIDE_STYLE('',(#303488)); +#303488 = SURFACE_STYLE_FILL_AREA(#303489); +#303489 = FILL_AREA_STYLE('',(#303490)); +#303490 = FILL_AREA_STYLE_COLOUR('',#280691); +#303491 = CURVE_STYLE('',#303492,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303492 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303493 = STYLED_ITEM('color',(#303494),#35668); +#303494 = PRESENTATION_STYLE_ASSIGNMENT((#303495,#303500)); +#303495 = SURFACE_STYLE_USAGE(.BOTH.,#303496); +#303496 = SURFACE_SIDE_STYLE('',(#303497)); +#303497 = SURFACE_STYLE_FILL_AREA(#303498); +#303498 = FILL_AREA_STYLE('',(#303499)); +#303499 = FILL_AREA_STYLE_COLOUR('',#280691); +#303500 = CURVE_STYLE('',#303501,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303501 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303502 = STYLED_ITEM('color',(#303503),#35685); +#303503 = PRESENTATION_STYLE_ASSIGNMENT((#303504,#303509)); +#303504 = SURFACE_STYLE_USAGE(.BOTH.,#303505); +#303505 = SURFACE_SIDE_STYLE('',(#303506)); +#303506 = SURFACE_STYLE_FILL_AREA(#303507); +#303507 = FILL_AREA_STYLE('',(#303508)); +#303508 = FILL_AREA_STYLE_COLOUR('',#280691); +#303509 = CURVE_STYLE('',#303510,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303510 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303511 = STYLED_ITEM('color',(#303512),#35702); +#303512 = PRESENTATION_STYLE_ASSIGNMENT((#303513,#303518)); +#303513 = SURFACE_STYLE_USAGE(.BOTH.,#303514); +#303514 = SURFACE_SIDE_STYLE('',(#303515)); +#303515 = SURFACE_STYLE_FILL_AREA(#303516); +#303516 = FILL_AREA_STYLE('',(#303517)); +#303517 = FILL_AREA_STYLE_COLOUR('',#280691); +#303518 = CURVE_STYLE('',#303519,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303519 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303520 = STYLED_ITEM('color',(#303521),#35714); +#303521 = PRESENTATION_STYLE_ASSIGNMENT((#303522,#303527)); +#303522 = SURFACE_STYLE_USAGE(.BOTH.,#303523); +#303523 = SURFACE_SIDE_STYLE('',(#303524)); +#303524 = SURFACE_STYLE_FILL_AREA(#303525); +#303525 = FILL_AREA_STYLE('',(#303526)); +#303526 = FILL_AREA_STYLE_COLOUR('',#280691); +#303527 = CURVE_STYLE('',#303528,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303528 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303529 = STYLED_ITEM('color',(#303530),#35731); +#303530 = PRESENTATION_STYLE_ASSIGNMENT((#303531,#303536)); +#303531 = SURFACE_STYLE_USAGE(.BOTH.,#303532); +#303532 = SURFACE_SIDE_STYLE('',(#303533)); +#303533 = SURFACE_STYLE_FILL_AREA(#303534); +#303534 = FILL_AREA_STYLE('',(#303535)); +#303535 = FILL_AREA_STYLE_COLOUR('',#280691); +#303536 = CURVE_STYLE('',#303537,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303537 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303538 = STYLED_ITEM('color',(#303539),#35748); +#303539 = PRESENTATION_STYLE_ASSIGNMENT((#303540,#303545)); +#303540 = SURFACE_STYLE_USAGE(.BOTH.,#303541); +#303541 = SURFACE_SIDE_STYLE('',(#303542)); +#303542 = SURFACE_STYLE_FILL_AREA(#303543); +#303543 = FILL_AREA_STYLE('',(#303544)); +#303544 = FILL_AREA_STYLE_COLOUR('',#280691); +#303545 = CURVE_STYLE('',#303546,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303546 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303547 = STYLED_ITEM('color',(#303548),#35760); +#303548 = PRESENTATION_STYLE_ASSIGNMENT((#303549,#303554)); +#303549 = SURFACE_STYLE_USAGE(.BOTH.,#303550); +#303550 = SURFACE_SIDE_STYLE('',(#303551)); +#303551 = SURFACE_STYLE_FILL_AREA(#303552); +#303552 = FILL_AREA_STYLE('',(#303553)); +#303553 = FILL_AREA_STYLE_COLOUR('',#280691); +#303554 = CURVE_STYLE('',#303555,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303555 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303556 = STYLED_ITEM('color',(#303557),#35777); +#303557 = PRESENTATION_STYLE_ASSIGNMENT((#303558,#303563)); +#303558 = SURFACE_STYLE_USAGE(.BOTH.,#303559); +#303559 = SURFACE_SIDE_STYLE('',(#303560)); +#303560 = SURFACE_STYLE_FILL_AREA(#303561); +#303561 = FILL_AREA_STYLE('',(#303562)); +#303562 = FILL_AREA_STYLE_COLOUR('',#280691); +#303563 = CURVE_STYLE('',#303564,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303564 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303565 = STYLED_ITEM('color',(#303566),#35794); +#303566 = PRESENTATION_STYLE_ASSIGNMENT((#303567,#303572)); +#303567 = SURFACE_STYLE_USAGE(.BOTH.,#303568); +#303568 = SURFACE_SIDE_STYLE('',(#303569)); +#303569 = SURFACE_STYLE_FILL_AREA(#303570); +#303570 = FILL_AREA_STYLE('',(#303571)); +#303571 = FILL_AREA_STYLE_COLOUR('',#280691); +#303572 = CURVE_STYLE('',#303573,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303573 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303574 = STYLED_ITEM('color',(#303575),#35806); +#303575 = PRESENTATION_STYLE_ASSIGNMENT((#303576,#303581)); +#303576 = SURFACE_STYLE_USAGE(.BOTH.,#303577); +#303577 = SURFACE_SIDE_STYLE('',(#303578)); +#303578 = SURFACE_STYLE_FILL_AREA(#303579); +#303579 = FILL_AREA_STYLE('',(#303580)); +#303580 = FILL_AREA_STYLE_COLOUR('',#280691); +#303581 = CURVE_STYLE('',#303582,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303582 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303583 = STYLED_ITEM('color',(#303584),#35823); +#303584 = PRESENTATION_STYLE_ASSIGNMENT((#303585,#303590)); +#303585 = SURFACE_STYLE_USAGE(.BOTH.,#303586); +#303586 = SURFACE_SIDE_STYLE('',(#303587)); +#303587 = SURFACE_STYLE_FILL_AREA(#303588); +#303588 = FILL_AREA_STYLE('',(#303589)); +#303589 = FILL_AREA_STYLE_COLOUR('',#280691); +#303590 = CURVE_STYLE('',#303591,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303591 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303592 = STYLED_ITEM('color',(#303593),#35840); +#303593 = PRESENTATION_STYLE_ASSIGNMENT((#303594,#303599)); +#303594 = SURFACE_STYLE_USAGE(.BOTH.,#303595); +#303595 = SURFACE_SIDE_STYLE('',(#303596)); +#303596 = SURFACE_STYLE_FILL_AREA(#303597); +#303597 = FILL_AREA_STYLE('',(#303598)); +#303598 = FILL_AREA_STYLE_COLOUR('',#280691); +#303599 = CURVE_STYLE('',#303600,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303600 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303601 = STYLED_ITEM('color',(#303602),#35852); +#303602 = PRESENTATION_STYLE_ASSIGNMENT((#303603,#303608)); +#303603 = SURFACE_STYLE_USAGE(.BOTH.,#303604); +#303604 = SURFACE_SIDE_STYLE('',(#303605)); +#303605 = SURFACE_STYLE_FILL_AREA(#303606); +#303606 = FILL_AREA_STYLE('',(#303607)); +#303607 = FILL_AREA_STYLE_COLOUR('',#280691); +#303608 = CURVE_STYLE('',#303609,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303609 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303610 = STYLED_ITEM('color',(#303611),#35869); +#303611 = PRESENTATION_STYLE_ASSIGNMENT((#303612,#303617)); +#303612 = SURFACE_STYLE_USAGE(.BOTH.,#303613); +#303613 = SURFACE_SIDE_STYLE('',(#303614)); +#303614 = SURFACE_STYLE_FILL_AREA(#303615); +#303615 = FILL_AREA_STYLE('',(#303616)); +#303616 = FILL_AREA_STYLE_COLOUR('',#280691); +#303617 = CURVE_STYLE('',#303618,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303618 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303619 = STYLED_ITEM('color',(#303620),#35886); +#303620 = PRESENTATION_STYLE_ASSIGNMENT((#303621,#303626)); +#303621 = SURFACE_STYLE_USAGE(.BOTH.,#303622); +#303622 = SURFACE_SIDE_STYLE('',(#303623)); +#303623 = SURFACE_STYLE_FILL_AREA(#303624); +#303624 = FILL_AREA_STYLE('',(#303625)); +#303625 = FILL_AREA_STYLE_COLOUR('',#280691); +#303626 = CURVE_STYLE('',#303627,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303627 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303628 = STYLED_ITEM('color',(#303629),#35898); +#303629 = PRESENTATION_STYLE_ASSIGNMENT((#303630,#303635)); +#303630 = SURFACE_STYLE_USAGE(.BOTH.,#303631); +#303631 = SURFACE_SIDE_STYLE('',(#303632)); +#303632 = SURFACE_STYLE_FILL_AREA(#303633); +#303633 = FILL_AREA_STYLE('',(#303634)); +#303634 = FILL_AREA_STYLE_COLOUR('',#280691); +#303635 = CURVE_STYLE('',#303636,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303636 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303637 = STYLED_ITEM('color',(#303638),#35915); +#303638 = PRESENTATION_STYLE_ASSIGNMENT((#303639,#303644)); +#303639 = SURFACE_STYLE_USAGE(.BOTH.,#303640); +#303640 = SURFACE_SIDE_STYLE('',(#303641)); +#303641 = SURFACE_STYLE_FILL_AREA(#303642); +#303642 = FILL_AREA_STYLE('',(#303643)); +#303643 = FILL_AREA_STYLE_COLOUR('',#280691); +#303644 = CURVE_STYLE('',#303645,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303645 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303646 = STYLED_ITEM('color',(#303647),#35932); +#303647 = PRESENTATION_STYLE_ASSIGNMENT((#303648,#303653)); +#303648 = SURFACE_STYLE_USAGE(.BOTH.,#303649); +#303649 = SURFACE_SIDE_STYLE('',(#303650)); +#303650 = SURFACE_STYLE_FILL_AREA(#303651); +#303651 = FILL_AREA_STYLE('',(#303652)); +#303652 = FILL_AREA_STYLE_COLOUR('',#280691); +#303653 = CURVE_STYLE('',#303654,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303654 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303655 = STYLED_ITEM('color',(#303656),#35944); +#303656 = PRESENTATION_STYLE_ASSIGNMENT((#303657,#303662)); +#303657 = SURFACE_STYLE_USAGE(.BOTH.,#303658); +#303658 = SURFACE_SIDE_STYLE('',(#303659)); +#303659 = SURFACE_STYLE_FILL_AREA(#303660); +#303660 = FILL_AREA_STYLE('',(#303661)); +#303661 = FILL_AREA_STYLE_COLOUR('',#280691); +#303662 = CURVE_STYLE('',#303663,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303663 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303664 = STYLED_ITEM('color',(#303665),#35961); +#303665 = PRESENTATION_STYLE_ASSIGNMENT((#303666,#303671)); +#303666 = SURFACE_STYLE_USAGE(.BOTH.,#303667); +#303667 = SURFACE_SIDE_STYLE('',(#303668)); +#303668 = SURFACE_STYLE_FILL_AREA(#303669); +#303669 = FILL_AREA_STYLE('',(#303670)); +#303670 = FILL_AREA_STYLE_COLOUR('',#280691); +#303671 = CURVE_STYLE('',#303672,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303672 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303673 = STYLED_ITEM('color',(#303674),#35978); +#303674 = PRESENTATION_STYLE_ASSIGNMENT((#303675,#303680)); +#303675 = SURFACE_STYLE_USAGE(.BOTH.,#303676); +#303676 = SURFACE_SIDE_STYLE('',(#303677)); +#303677 = SURFACE_STYLE_FILL_AREA(#303678); +#303678 = FILL_AREA_STYLE('',(#303679)); +#303679 = FILL_AREA_STYLE_COLOUR('',#280691); +#303680 = CURVE_STYLE('',#303681,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303681 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303682 = STYLED_ITEM('color',(#303683),#35990); +#303683 = PRESENTATION_STYLE_ASSIGNMENT((#303684,#303689)); +#303684 = SURFACE_STYLE_USAGE(.BOTH.,#303685); +#303685 = SURFACE_SIDE_STYLE('',(#303686)); +#303686 = SURFACE_STYLE_FILL_AREA(#303687); +#303687 = FILL_AREA_STYLE('',(#303688)); +#303688 = FILL_AREA_STYLE_COLOUR('',#280691); +#303689 = CURVE_STYLE('',#303690,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303690 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303691 = STYLED_ITEM('color',(#303692),#36007); +#303692 = PRESENTATION_STYLE_ASSIGNMENT((#303693,#303698)); +#303693 = SURFACE_STYLE_USAGE(.BOTH.,#303694); +#303694 = SURFACE_SIDE_STYLE('',(#303695)); +#303695 = SURFACE_STYLE_FILL_AREA(#303696); +#303696 = FILL_AREA_STYLE('',(#303697)); +#303697 = FILL_AREA_STYLE_COLOUR('',#280691); +#303698 = CURVE_STYLE('',#303699,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303699 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303700 = STYLED_ITEM('color',(#303701),#36024); +#303701 = PRESENTATION_STYLE_ASSIGNMENT((#303702,#303707)); +#303702 = SURFACE_STYLE_USAGE(.BOTH.,#303703); +#303703 = SURFACE_SIDE_STYLE('',(#303704)); +#303704 = SURFACE_STYLE_FILL_AREA(#303705); +#303705 = FILL_AREA_STYLE('',(#303706)); +#303706 = FILL_AREA_STYLE_COLOUR('',#280691); +#303707 = CURVE_STYLE('',#303708,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303708 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303709 = STYLED_ITEM('color',(#303710),#36036); +#303710 = PRESENTATION_STYLE_ASSIGNMENT((#303711,#303716)); +#303711 = SURFACE_STYLE_USAGE(.BOTH.,#303712); +#303712 = SURFACE_SIDE_STYLE('',(#303713)); +#303713 = SURFACE_STYLE_FILL_AREA(#303714); +#303714 = FILL_AREA_STYLE('',(#303715)); +#303715 = FILL_AREA_STYLE_COLOUR('',#280691); +#303716 = CURVE_STYLE('',#303717,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303717 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303718 = STYLED_ITEM('color',(#303719),#36053); +#303719 = PRESENTATION_STYLE_ASSIGNMENT((#303720,#303725)); +#303720 = SURFACE_STYLE_USAGE(.BOTH.,#303721); +#303721 = SURFACE_SIDE_STYLE('',(#303722)); +#303722 = SURFACE_STYLE_FILL_AREA(#303723); +#303723 = FILL_AREA_STYLE('',(#303724)); +#303724 = FILL_AREA_STYLE_COLOUR('',#280691); +#303725 = CURVE_STYLE('',#303726,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303726 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303727 = STYLED_ITEM('color',(#303728),#36070); +#303728 = PRESENTATION_STYLE_ASSIGNMENT((#303729,#303734)); +#303729 = SURFACE_STYLE_USAGE(.BOTH.,#303730); +#303730 = SURFACE_SIDE_STYLE('',(#303731)); +#303731 = SURFACE_STYLE_FILL_AREA(#303732); +#303732 = FILL_AREA_STYLE('',(#303733)); +#303733 = FILL_AREA_STYLE_COLOUR('',#280691); +#303734 = CURVE_STYLE('',#303735,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303735 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303736 = STYLED_ITEM('color',(#303737),#36082); +#303737 = PRESENTATION_STYLE_ASSIGNMENT((#303738,#303743)); +#303738 = SURFACE_STYLE_USAGE(.BOTH.,#303739); +#303739 = SURFACE_SIDE_STYLE('',(#303740)); +#303740 = SURFACE_STYLE_FILL_AREA(#303741); +#303741 = FILL_AREA_STYLE('',(#303742)); +#303742 = FILL_AREA_STYLE_COLOUR('',#280691); +#303743 = CURVE_STYLE('',#303744,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303744 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303745 = STYLED_ITEM('color',(#303746),#36099); +#303746 = PRESENTATION_STYLE_ASSIGNMENT((#303747,#303752)); +#303747 = SURFACE_STYLE_USAGE(.BOTH.,#303748); +#303748 = SURFACE_SIDE_STYLE('',(#303749)); +#303749 = SURFACE_STYLE_FILL_AREA(#303750); +#303750 = FILL_AREA_STYLE('',(#303751)); +#303751 = FILL_AREA_STYLE_COLOUR('',#280691); +#303752 = CURVE_STYLE('',#303753,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303753 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303754 = STYLED_ITEM('color',(#303755),#36116); +#303755 = PRESENTATION_STYLE_ASSIGNMENT((#303756,#303761)); +#303756 = SURFACE_STYLE_USAGE(.BOTH.,#303757); +#303757 = SURFACE_SIDE_STYLE('',(#303758)); +#303758 = SURFACE_STYLE_FILL_AREA(#303759); +#303759 = FILL_AREA_STYLE('',(#303760)); +#303760 = FILL_AREA_STYLE_COLOUR('',#280691); +#303761 = CURVE_STYLE('',#303762,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#303762 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303763 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #303764,#303771,#303778,#303785,#303792,#303799,#303806,#303813, + #303820,#303827,#303834,#303841,#303848,#303855,#303863,#303870, + #303877,#303884,#303891,#303898,#303905,#303912,#303919,#303926, + #303933,#303940),#1342); +#303764 = STYLED_ITEM('color',(#303765),#554); +#303765 = PRESENTATION_STYLE_ASSIGNMENT((#303766)); +#303766 = SURFACE_STYLE_USAGE(.BOTH.,#303767); +#303767 = SURFACE_SIDE_STYLE('',(#303768)); +#303768 = SURFACE_STYLE_FILL_AREA(#303769); +#303769 = FILL_AREA_STYLE('',(#303770)); +#303770 = FILL_AREA_STYLE_COLOUR('',#282540); +#303771 = STYLED_ITEM('color',(#303772),#594); +#303772 = PRESENTATION_STYLE_ASSIGNMENT((#303773)); +#303773 = SURFACE_STYLE_USAGE(.BOTH.,#303774); +#303774 = SURFACE_SIDE_STYLE('',(#303775)); +#303775 = SURFACE_STYLE_FILL_AREA(#303776); +#303776 = FILL_AREA_STYLE('',(#303777)); +#303777 = FILL_AREA_STYLE_COLOUR('',#282540); +#303778 = STYLED_ITEM('color',(#303779),#677); +#303779 = PRESENTATION_STYLE_ASSIGNMENT((#303780)); +#303780 = SURFACE_STYLE_USAGE(.BOTH.,#303781); +#303781 = SURFACE_SIDE_STYLE('',(#303782)); +#303782 = SURFACE_STYLE_FILL_AREA(#303783); +#303783 = FILL_AREA_STYLE('',(#303784)); +#303784 = FILL_AREA_STYLE_COLOUR('',#282540); +#303785 = STYLED_ITEM('color',(#303786),#702); +#303786 = PRESENTATION_STYLE_ASSIGNMENT((#303787)); +#303787 = SURFACE_STYLE_USAGE(.BOTH.,#303788); +#303788 = SURFACE_SIDE_STYLE('',(#303789)); +#303789 = SURFACE_STYLE_FILL_AREA(#303790); +#303790 = FILL_AREA_STYLE('',(#303791)); +#303791 = FILL_AREA_STYLE_COLOUR('',#282540); +#303792 = STYLED_ITEM('color',(#303793),#727); +#303793 = PRESENTATION_STYLE_ASSIGNMENT((#303794)); +#303794 = SURFACE_STYLE_USAGE(.BOTH.,#303795); +#303795 = SURFACE_SIDE_STYLE('',(#303796)); +#303796 = SURFACE_STYLE_FILL_AREA(#303797); +#303797 = FILL_AREA_STYLE('',(#303798)); +#303798 = FILL_AREA_STYLE_COLOUR('',#282540); +#303799 = STYLED_ITEM('color',(#303800),#794); +#303800 = PRESENTATION_STYLE_ASSIGNMENT((#303801)); +#303801 = SURFACE_STYLE_USAGE(.BOTH.,#303802); +#303802 = SURFACE_SIDE_STYLE('',(#303803)); +#303803 = SURFACE_STYLE_FILL_AREA(#303804); +#303804 = FILL_AREA_STYLE('',(#303805)); +#303805 = FILL_AREA_STYLE_COLOUR('',#282540); +#303806 = STYLED_ITEM('color',(#303807),#811); +#303807 = PRESENTATION_STYLE_ASSIGNMENT((#303808)); +#303808 = SURFACE_STYLE_USAGE(.BOTH.,#303809); +#303809 = SURFACE_SIDE_STYLE('',(#303810)); +#303810 = SURFACE_STYLE_FILL_AREA(#303811); +#303811 = FILL_AREA_STYLE('',(#303812)); +#303812 = FILL_AREA_STYLE_COLOUR('',#282540); +#303813 = STYLED_ITEM('color',(#303814),#828); +#303814 = PRESENTATION_STYLE_ASSIGNMENT((#303815)); +#303815 = SURFACE_STYLE_USAGE(.BOTH.,#303816); +#303816 = SURFACE_SIDE_STYLE('',(#303817)); +#303817 = SURFACE_STYLE_FILL_AREA(#303818); +#303818 = FILL_AREA_STYLE('',(#303819)); +#303819 = FILL_AREA_STYLE_COLOUR('',#292826); +#303820 = STYLED_ITEM('color',(#303821),#877); +#303821 = PRESENTATION_STYLE_ASSIGNMENT((#303822)); +#303822 = SURFACE_STYLE_USAGE(.BOTH.,#303823); +#303823 = SURFACE_SIDE_STYLE('',(#303824)); +#303824 = SURFACE_STYLE_FILL_AREA(#303825); +#303825 = FILL_AREA_STYLE('',(#303826)); +#303826 = FILL_AREA_STYLE_COLOUR('',#282540); +#303827 = STYLED_ITEM('color',(#303828),#894); +#303828 = PRESENTATION_STYLE_ASSIGNMENT((#303829)); +#303829 = SURFACE_STYLE_USAGE(.BOTH.,#303830); +#303830 = SURFACE_SIDE_STYLE('',(#303831)); +#303831 = SURFACE_STYLE_FILL_AREA(#303832); +#303832 = FILL_AREA_STYLE('',(#303833)); +#303833 = FILL_AREA_STYLE_COLOUR('',#282540); +#303834 = STYLED_ITEM('color',(#303835),#911); +#303835 = PRESENTATION_STYLE_ASSIGNMENT((#303836)); +#303836 = SURFACE_STYLE_USAGE(.BOTH.,#303837); +#303837 = SURFACE_SIDE_STYLE('',(#303838)); +#303838 = SURFACE_STYLE_FILL_AREA(#303839); +#303839 = FILL_AREA_STYLE('',(#303840)); +#303840 = FILL_AREA_STYLE_COLOUR('',#292826); +#303841 = STYLED_ITEM('color',(#303842),#960); +#303842 = PRESENTATION_STYLE_ASSIGNMENT((#303843)); +#303843 = SURFACE_STYLE_USAGE(.BOTH.,#303844); +#303844 = SURFACE_SIDE_STYLE('',(#303845)); +#303845 = SURFACE_STYLE_FILL_AREA(#303846); +#303846 = FILL_AREA_STYLE('',(#303847)); +#303847 = FILL_AREA_STYLE_COLOUR('',#292826); +#303848 = STYLED_ITEM('color',(#303849),#977); +#303849 = PRESENTATION_STYLE_ASSIGNMENT((#303850)); +#303850 = SURFACE_STYLE_USAGE(.BOTH.,#303851); +#303851 = SURFACE_SIDE_STYLE('',(#303852)); +#303852 = SURFACE_STYLE_FILL_AREA(#303853); +#303853 = FILL_AREA_STYLE('',(#303854)); +#303854 = FILL_AREA_STYLE_COLOUR('',#282540); +#303855 = STYLED_ITEM('color',(#303856),#1046); +#303856 = PRESENTATION_STYLE_ASSIGNMENT((#303857)); +#303857 = SURFACE_STYLE_USAGE(.BOTH.,#303858); +#303858 = SURFACE_SIDE_STYLE('',(#303859)); +#303859 = SURFACE_STYLE_FILL_AREA(#303860); +#303860 = FILL_AREA_STYLE('',(#303861)); +#303861 = FILL_AREA_STYLE_COLOUR('',#303862); +#303862 = COLOUR_RGB('',8.200000279077E-02,8.600000121357E-02, + 9.399999706163E-02); +#303863 = STYLED_ITEM('color',(#303864),#1077); +#303864 = PRESENTATION_STYLE_ASSIGNMENT((#303865)); +#303865 = SURFACE_STYLE_USAGE(.BOTH.,#303866); +#303866 = SURFACE_SIDE_STYLE('',(#303867)); +#303867 = SURFACE_STYLE_FILL_AREA(#303868); +#303868 = FILL_AREA_STYLE('',(#303869)); +#303869 = FILL_AREA_STYLE_COLOUR('',#303862); +#303870 = STYLED_ITEM('color',(#303871),#1101); +#303871 = PRESENTATION_STYLE_ASSIGNMENT((#303872)); +#303872 = SURFACE_STYLE_USAGE(.BOTH.,#303873); +#303873 = SURFACE_SIDE_STYLE('',(#303874)); +#303874 = SURFACE_STYLE_FILL_AREA(#303875); +#303875 = FILL_AREA_STYLE('',(#303876)); +#303876 = FILL_AREA_STYLE_COLOUR('',#282540); +#303877 = STYLED_ITEM('color',(#303878),#1170); +#303878 = PRESENTATION_STYLE_ASSIGNMENT((#303879)); +#303879 = SURFACE_STYLE_USAGE(.BOTH.,#303880); +#303880 = SURFACE_SIDE_STYLE('',(#303881)); +#303881 = SURFACE_STYLE_FILL_AREA(#303882); +#303882 = FILL_AREA_STYLE('',(#303883)); +#303883 = FILL_AREA_STYLE_COLOUR('',#303862); +#303884 = STYLED_ITEM('color',(#303885),#1194); +#303885 = PRESENTATION_STYLE_ASSIGNMENT((#303886)); +#303886 = SURFACE_STYLE_USAGE(.BOTH.,#303887); +#303887 = SURFACE_SIDE_STYLE('',(#303888)); +#303888 = SURFACE_STYLE_FILL_AREA(#303889); +#303889 = FILL_AREA_STYLE('',(#303890)); +#303890 = FILL_AREA_STYLE_COLOUR('',#282540); +#303891 = STYLED_ITEM('color',(#303892),#1211); +#303892 = PRESENTATION_STYLE_ASSIGNMENT((#303893)); +#303893 = SURFACE_STYLE_USAGE(.BOTH.,#303894); +#303894 = SURFACE_SIDE_STYLE('',(#303895)); +#303895 = SURFACE_STYLE_FILL_AREA(#303896); +#303896 = FILL_AREA_STYLE('',(#303897)); +#303897 = FILL_AREA_STYLE_COLOUR('',#282540); +#303898 = STYLED_ITEM('color',(#303899),#1228); +#303899 = PRESENTATION_STYLE_ASSIGNMENT((#303900)); +#303900 = SURFACE_STYLE_USAGE(.BOTH.,#303901); +#303901 = SURFACE_SIDE_STYLE('',(#303902)); +#303902 = SURFACE_STYLE_FILL_AREA(#303903); +#303903 = FILL_AREA_STYLE('',(#303904)); +#303904 = FILL_AREA_STYLE_COLOUR('',#282540); +#303905 = STYLED_ITEM('color',(#303906),#1245); +#303906 = PRESENTATION_STYLE_ASSIGNMENT((#303907)); +#303907 = SURFACE_STYLE_USAGE(.BOTH.,#303908); +#303908 = SURFACE_SIDE_STYLE('',(#303909)); +#303909 = SURFACE_STYLE_FILL_AREA(#303910); +#303910 = FILL_AREA_STYLE('',(#303911)); +#303911 = FILL_AREA_STYLE_COLOUR('',#282540); +#303912 = STYLED_ITEM('color',(#303913),#1262); +#303913 = PRESENTATION_STYLE_ASSIGNMENT((#303914)); +#303914 = SURFACE_STYLE_USAGE(.BOTH.,#303915); +#303915 = SURFACE_SIDE_STYLE('',(#303916)); +#303916 = SURFACE_STYLE_FILL_AREA(#303917); +#303917 = FILL_AREA_STYLE('',(#303918)); +#303918 = FILL_AREA_STYLE_COLOUR('',#282540); +#303919 = STYLED_ITEM('color',(#303920),#1279); +#303920 = PRESENTATION_STYLE_ASSIGNMENT((#303921)); +#303921 = SURFACE_STYLE_USAGE(.BOTH.,#303922); +#303922 = SURFACE_SIDE_STYLE('',(#303923)); +#303923 = SURFACE_STYLE_FILL_AREA(#303924); +#303924 = FILL_AREA_STYLE('',(#303925)); +#303925 = FILL_AREA_STYLE_COLOUR('',#282540); +#303926 = STYLED_ITEM('color',(#303927),#1296); +#303927 = PRESENTATION_STYLE_ASSIGNMENT((#303928)); +#303928 = SURFACE_STYLE_USAGE(.BOTH.,#303929); +#303929 = SURFACE_SIDE_STYLE('',(#303930)); +#303930 = SURFACE_STYLE_FILL_AREA(#303931); +#303931 = FILL_AREA_STYLE('',(#303932)); +#303932 = FILL_AREA_STYLE_COLOUR('',#282540); +#303933 = STYLED_ITEM('color',(#303934),#1313); +#303934 = PRESENTATION_STYLE_ASSIGNMENT((#303935)); +#303935 = SURFACE_STYLE_USAGE(.BOTH.,#303936); +#303936 = SURFACE_SIDE_STYLE('',(#303937)); +#303937 = SURFACE_STYLE_FILL_AREA(#303938); +#303938 = FILL_AREA_STYLE('',(#303939)); +#303939 = FILL_AREA_STYLE_COLOUR('',#303862); +#303940 = STYLED_ITEM('color',(#303941),#1330); +#303941 = PRESENTATION_STYLE_ASSIGNMENT((#303942)); +#303942 = SURFACE_STYLE_USAGE(.BOTH.,#303943); +#303943 = SURFACE_SIDE_STYLE('',(#303944)); +#303944 = SURFACE_STYLE_FILL_AREA(#303945); +#303945 = FILL_AREA_STYLE('',(#303946)); +#303946 = FILL_AREA_STYLE_COLOUR('',#303862); +#303947 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #303948,#303955,#303962,#303969,#303976,#303983,#303990,#303997, + #304004,#304011,#304018,#304025,#304032,#304039,#304046,#304053, + #304060,#304067,#304074,#304081,#304088,#304095,#304102,#304109, + #304116,#304123,#304130,#304137),#66521); +#303948 = STYLED_ITEM('color',(#303949),#65669); +#303949 = PRESENTATION_STYLE_ASSIGNMENT((#303950)); +#303950 = SURFACE_STYLE_USAGE(.BOTH.,#303951); +#303951 = SURFACE_SIDE_STYLE('',(#303952)); +#303952 = SURFACE_STYLE_FILL_AREA(#303953); +#303953 = FILL_AREA_STYLE('',(#303954)); +#303954 = FILL_AREA_STYLE_COLOUR('',#282540); +#303955 = STYLED_ITEM('color',(#303956),#65745); +#303956 = PRESENTATION_STYLE_ASSIGNMENT((#303957)); +#303957 = SURFACE_STYLE_USAGE(.BOTH.,#303958); +#303958 = SURFACE_SIDE_STYLE('',(#303959)); +#303959 = SURFACE_STYLE_FILL_AREA(#303960); +#303960 = FILL_AREA_STYLE('',(#303961)); +#303961 = FILL_AREA_STYLE_COLOUR('',#282540); +#303962 = STYLED_ITEM('color',(#303963),#65776); +#303963 = PRESENTATION_STYLE_ASSIGNMENT((#303964)); +#303964 = SURFACE_STYLE_USAGE(.BOTH.,#303965); +#303965 = SURFACE_SIDE_STYLE('',(#303966)); +#303966 = SURFACE_STYLE_FILL_AREA(#303967); +#303967 = FILL_AREA_STYLE('',(#303968)); +#303968 = FILL_AREA_STYLE_COLOUR('',#282540); +#303969 = STYLED_ITEM('color',(#303970),#65801); +#303970 = PRESENTATION_STYLE_ASSIGNMENT((#303971)); +#303971 = SURFACE_STYLE_USAGE(.BOTH.,#303972); +#303972 = SURFACE_SIDE_STYLE('',(#303973)); +#303973 = SURFACE_STYLE_FILL_AREA(#303974); +#303974 = FILL_AREA_STYLE('',(#303975)); +#303975 = FILL_AREA_STYLE_COLOUR('',#282540); +#303976 = STYLED_ITEM('color',(#303977),#65826); +#303977 = PRESENTATION_STYLE_ASSIGNMENT((#303978)); +#303978 = SURFACE_STYLE_USAGE(.BOTH.,#303979); +#303979 = SURFACE_SIDE_STYLE('',(#303980)); +#303980 = SURFACE_STYLE_FILL_AREA(#303981); +#303981 = FILL_AREA_STYLE('',(#303982)); +#303982 = FILL_AREA_STYLE_COLOUR('',#282540); +#303983 = STYLED_ITEM('color',(#303984),#65850); +#303984 = PRESENTATION_STYLE_ASSIGNMENT((#303985)); +#303985 = SURFACE_STYLE_USAGE(.BOTH.,#303986); +#303986 = SURFACE_SIDE_STYLE('',(#303987)); +#303987 = SURFACE_STYLE_FILL_AREA(#303988); +#303988 = FILL_AREA_STYLE('',(#303989)); +#303989 = FILL_AREA_STYLE_COLOUR('',#282540); +#303990 = STYLED_ITEM('color',(#303991),#65874); +#303991 = PRESENTATION_STYLE_ASSIGNMENT((#303992)); +#303992 = SURFACE_STYLE_USAGE(.BOTH.,#303993); +#303993 = SURFACE_SIDE_STYLE('',(#303994)); +#303994 = SURFACE_STYLE_FILL_AREA(#303995); +#303995 = FILL_AREA_STYLE('',(#303996)); +#303996 = FILL_AREA_STYLE_COLOUR('',#282540); +#303997 = STYLED_ITEM('color',(#303998),#65899); +#303998 = PRESENTATION_STYLE_ASSIGNMENT((#303999)); +#303999 = SURFACE_STYLE_USAGE(.BOTH.,#304000); +#304000 = SURFACE_SIDE_STYLE('',(#304001)); +#304001 = SURFACE_STYLE_FILL_AREA(#304002); +#304002 = FILL_AREA_STYLE('',(#304003)); +#304003 = FILL_AREA_STYLE_COLOUR('',#282540); +#304004 = STYLED_ITEM('color',(#304005),#65924); +#304005 = PRESENTATION_STYLE_ASSIGNMENT((#304006)); +#304006 = SURFACE_STYLE_USAGE(.BOTH.,#304007); +#304007 = SURFACE_SIDE_STYLE('',(#304008)); +#304008 = SURFACE_STYLE_FILL_AREA(#304009); +#304009 = FILL_AREA_STYLE('',(#304010)); +#304010 = FILL_AREA_STYLE_COLOUR('',#282540); +#304011 = STYLED_ITEM('color',(#304012),#65941); +#304012 = PRESENTATION_STYLE_ASSIGNMENT((#304013)); +#304013 = SURFACE_STYLE_USAGE(.BOTH.,#304014); +#304014 = SURFACE_SIDE_STYLE('',(#304015)); +#304015 = SURFACE_STYLE_FILL_AREA(#304016); +#304016 = FILL_AREA_STYLE('',(#304017)); +#304017 = FILL_AREA_STYLE_COLOUR('',#282540); +#304018 = STYLED_ITEM('color',(#304019),#66027); +#304019 = PRESENTATION_STYLE_ASSIGNMENT((#304020)); +#304020 = SURFACE_STYLE_USAGE(.BOTH.,#304021); +#304021 = SURFACE_SIDE_STYLE('',(#304022)); +#304022 = SURFACE_STYLE_FILL_AREA(#304023); +#304023 = FILL_AREA_STYLE('',(#304024)); +#304024 = FILL_AREA_STYLE_COLOUR('',#294742); +#304025 = STYLED_ITEM('color',(#304026),#66059); +#304026 = PRESENTATION_STYLE_ASSIGNMENT((#304027)); +#304027 = SURFACE_STYLE_USAGE(.BOTH.,#304028); +#304028 = SURFACE_SIDE_STYLE('',(#304029)); +#304029 = SURFACE_STYLE_FILL_AREA(#304030); +#304030 = FILL_AREA_STYLE('',(#304031)); +#304031 = FILL_AREA_STYLE_COLOUR('',#294742); +#304032 = STYLED_ITEM('color',(#304033),#66083); +#304033 = PRESENTATION_STYLE_ASSIGNMENT((#304034)); +#304034 = SURFACE_STYLE_USAGE(.BOTH.,#304035); +#304035 = SURFACE_SIDE_STYLE('',(#304036)); +#304036 = SURFACE_STYLE_FILL_AREA(#304037); +#304037 = FILL_AREA_STYLE('',(#304038)); +#304038 = FILL_AREA_STYLE_COLOUR('',#294742); +#304039 = STYLED_ITEM('color',(#304040),#66108); +#304040 = PRESENTATION_STYLE_ASSIGNMENT((#304041)); +#304041 = SURFACE_STYLE_USAGE(.BOTH.,#304042); +#304042 = SURFACE_SIDE_STYLE('',(#304043)); +#304043 = SURFACE_STYLE_FILL_AREA(#304044); +#304044 = FILL_AREA_STYLE('',(#304045)); +#304045 = FILL_AREA_STYLE_COLOUR('',#294742); +#304046 = STYLED_ITEM('color',(#304047),#66132); +#304047 = PRESENTATION_STYLE_ASSIGNMENT((#304048)); +#304048 = SURFACE_STYLE_USAGE(.BOTH.,#304049); +#304049 = SURFACE_SIDE_STYLE('',(#304050)); +#304050 = SURFACE_STYLE_FILL_AREA(#304051); +#304051 = FILL_AREA_STYLE('',(#304052)); +#304052 = FILL_AREA_STYLE_COLOUR('',#294742); +#304053 = STYLED_ITEM('color',(#304054),#66157); +#304054 = PRESENTATION_STYLE_ASSIGNMENT((#304055)); +#304055 = SURFACE_STYLE_USAGE(.BOTH.,#304056); +#304056 = SURFACE_SIDE_STYLE('',(#304057)); +#304057 = SURFACE_STYLE_FILL_AREA(#304058); +#304058 = FILL_AREA_STYLE('',(#304059)); +#304059 = FILL_AREA_STYLE_COLOUR('',#294742); +#304060 = STYLED_ITEM('color',(#304061),#66181); +#304061 = PRESENTATION_STYLE_ASSIGNMENT((#304062)); +#304062 = SURFACE_STYLE_USAGE(.BOTH.,#304063); +#304063 = SURFACE_SIDE_STYLE('',(#304064)); +#304064 = SURFACE_STYLE_FILL_AREA(#304065); +#304065 = FILL_AREA_STYLE('',(#304066)); +#304066 = FILL_AREA_STYLE_COLOUR('',#294742); +#304067 = STYLED_ITEM('color',(#304068),#66206); +#304068 = PRESENTATION_STYLE_ASSIGNMENT((#304069)); +#304069 = SURFACE_STYLE_USAGE(.BOTH.,#304070); +#304070 = SURFACE_SIDE_STYLE('',(#304071)); +#304071 = SURFACE_STYLE_FILL_AREA(#304072); +#304072 = FILL_AREA_STYLE('',(#304073)); +#304073 = FILL_AREA_STYLE_COLOUR('',#294742); +#304074 = STYLED_ITEM('color',(#304075),#66223); +#304075 = PRESENTATION_STYLE_ASSIGNMENT((#304076)); +#304076 = SURFACE_STYLE_USAGE(.BOTH.,#304077); +#304077 = SURFACE_SIDE_STYLE('',(#304078)); +#304078 = SURFACE_STYLE_FILL_AREA(#304079); +#304079 = FILL_AREA_STYLE('',(#304080)); +#304080 = FILL_AREA_STYLE_COLOUR('',#282540); +#304081 = STYLED_ITEM('color',(#304082),#66309); +#304082 = PRESENTATION_STYLE_ASSIGNMENT((#304083)); +#304083 = SURFACE_STYLE_USAGE(.BOTH.,#304084); +#304084 = SURFACE_SIDE_STYLE('',(#304085)); +#304085 = SURFACE_STYLE_FILL_AREA(#304086); +#304086 = FILL_AREA_STYLE('',(#304087)); +#304087 = FILL_AREA_STYLE_COLOUR('',#282540); +#304088 = STYLED_ITEM('color',(#304089),#66340); +#304089 = PRESENTATION_STYLE_ASSIGNMENT((#304090)); +#304090 = SURFACE_STYLE_USAGE(.BOTH.,#304091); +#304091 = SURFACE_SIDE_STYLE('',(#304092)); +#304092 = SURFACE_STYLE_FILL_AREA(#304093); +#304093 = FILL_AREA_STYLE('',(#304094)); +#304094 = FILL_AREA_STYLE_COLOUR('',#282540); +#304095 = STYLED_ITEM('color',(#304096),#66365); +#304096 = PRESENTATION_STYLE_ASSIGNMENT((#304097)); +#304097 = SURFACE_STYLE_USAGE(.BOTH.,#304098); +#304098 = SURFACE_SIDE_STYLE('',(#304099)); +#304099 = SURFACE_STYLE_FILL_AREA(#304100); +#304100 = FILL_AREA_STYLE('',(#304101)); +#304101 = FILL_AREA_STYLE_COLOUR('',#282540); +#304102 = STYLED_ITEM('color',(#304103),#66390); +#304103 = PRESENTATION_STYLE_ASSIGNMENT((#304104)); +#304104 = SURFACE_STYLE_USAGE(.BOTH.,#304105); +#304105 = SURFACE_SIDE_STYLE('',(#304106)); +#304106 = SURFACE_STYLE_FILL_AREA(#304107); +#304107 = FILL_AREA_STYLE('',(#304108)); +#304108 = FILL_AREA_STYLE_COLOUR('',#282540); +#304109 = STYLED_ITEM('color',(#304110),#66414); +#304110 = PRESENTATION_STYLE_ASSIGNMENT((#304111)); +#304111 = SURFACE_STYLE_USAGE(.BOTH.,#304112); +#304112 = SURFACE_SIDE_STYLE('',(#304113)); +#304113 = SURFACE_STYLE_FILL_AREA(#304114); +#304114 = FILL_AREA_STYLE('',(#304115)); +#304115 = FILL_AREA_STYLE_COLOUR('',#282540); +#304116 = STYLED_ITEM('color',(#304117),#66438); +#304117 = PRESENTATION_STYLE_ASSIGNMENT((#304118)); +#304118 = SURFACE_STYLE_USAGE(.BOTH.,#304119); +#304119 = SURFACE_SIDE_STYLE('',(#304120)); +#304120 = SURFACE_STYLE_FILL_AREA(#304121); +#304121 = FILL_AREA_STYLE('',(#304122)); +#304122 = FILL_AREA_STYLE_COLOUR('',#282540); +#304123 = STYLED_ITEM('color',(#304124),#66463); +#304124 = PRESENTATION_STYLE_ASSIGNMENT((#304125)); +#304125 = SURFACE_STYLE_USAGE(.BOTH.,#304126); +#304126 = SURFACE_SIDE_STYLE('',(#304127)); +#304127 = SURFACE_STYLE_FILL_AREA(#304128); +#304128 = FILL_AREA_STYLE('',(#304129)); +#304129 = FILL_AREA_STYLE_COLOUR('',#282540); +#304130 = STYLED_ITEM('color',(#304131),#66488); +#304131 = PRESENTATION_STYLE_ASSIGNMENT((#304132)); +#304132 = SURFACE_STYLE_USAGE(.BOTH.,#304133); +#304133 = SURFACE_SIDE_STYLE('',(#304134)); +#304134 = SURFACE_STYLE_FILL_AREA(#304135); +#304135 = FILL_AREA_STYLE('',(#304136)); +#304136 = FILL_AREA_STYLE_COLOUR('',#282540); +#304137 = STYLED_ITEM('color',(#304138),#66505); +#304138 = PRESENTATION_STYLE_ASSIGNMENT((#304139)); +#304139 = SURFACE_STYLE_USAGE(.BOTH.,#304140); +#304140 = SURFACE_SIDE_STYLE('',(#304141)); +#304141 = SURFACE_STYLE_FILL_AREA(#304142); +#304142 = FILL_AREA_STYLE('',(#304143)); +#304143 = FILL_AREA_STYLE_COLOUR('',#282540); +#304144 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #304145,#304154,#304163,#304172,#304181,#304190,#304199,#304208, + #304217,#304226,#304235,#304244,#304253,#304262,#304271,#304280, + #304289,#304298,#304307,#304316,#304325,#304334,#304343,#304352, + #304361,#304370,#304379,#304388,#304397,#304406,#304415,#304424, + #304433,#304442,#304451,#304460,#304469,#304478,#304487,#304496, + #304505,#304514,#304523,#304532,#304541,#304550,#304559,#304568, + #304577,#304586,#304595,#304604,#304613,#304622,#304631,#304640, + #304649,#304658,#304667),#103350); +#304145 = STYLED_ITEM('color',(#304146),#101664); +#304146 = PRESENTATION_STYLE_ASSIGNMENT((#304147,#304152)); +#304147 = SURFACE_STYLE_USAGE(.BOTH.,#304148); +#304148 = SURFACE_SIDE_STYLE('',(#304149)); +#304149 = SURFACE_STYLE_FILL_AREA(#304150); +#304150 = FILL_AREA_STYLE('',(#304151)); +#304151 = FILL_AREA_STYLE_COLOUR('',#279624); +#304152 = CURVE_STYLE('',#304153,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304153 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304154 = STYLED_ITEM('color',(#304155),#101718); +#304155 = PRESENTATION_STYLE_ASSIGNMENT((#304156,#304161)); +#304156 = SURFACE_STYLE_USAGE(.BOTH.,#304157); +#304157 = SURFACE_SIDE_STYLE('',(#304158)); +#304158 = SURFACE_STYLE_FILL_AREA(#304159); +#304159 = FILL_AREA_STYLE('',(#304160)); +#304160 = FILL_AREA_STYLE_COLOUR('',#279624); +#304161 = CURVE_STYLE('',#304162,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304162 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304163 = STYLED_ITEM('color',(#304164),#101781); +#304164 = PRESENTATION_STYLE_ASSIGNMENT((#304165,#304170)); +#304165 = SURFACE_STYLE_USAGE(.BOTH.,#304166); +#304166 = SURFACE_SIDE_STYLE('',(#304167)); +#304167 = SURFACE_STYLE_FILL_AREA(#304168); +#304168 = FILL_AREA_STYLE('',(#304169)); +#304169 = FILL_AREA_STYLE_COLOUR('',#279624); +#304170 = CURVE_STYLE('',#304171,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304171 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304172 = STYLED_ITEM('color',(#304173),#101804); +#304173 = PRESENTATION_STYLE_ASSIGNMENT((#304174,#304179)); +#304174 = SURFACE_STYLE_USAGE(.BOTH.,#304175); +#304175 = SURFACE_SIDE_STYLE('',(#304176)); +#304176 = SURFACE_STYLE_FILL_AREA(#304177); +#304177 = FILL_AREA_STYLE('',(#304178)); +#304178 = FILL_AREA_STYLE_COLOUR('',#279624); +#304179 = CURVE_STYLE('',#304180,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304180 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304181 = STYLED_ITEM('color',(#304182),#101834); +#304182 = PRESENTATION_STYLE_ASSIGNMENT((#304183,#304188)); +#304183 = SURFACE_STYLE_USAGE(.BOTH.,#304184); +#304184 = SURFACE_SIDE_STYLE('',(#304185)); +#304185 = SURFACE_STYLE_FILL_AREA(#304186); +#304186 = FILL_AREA_STYLE('',(#304187)); +#304187 = FILL_AREA_STYLE_COLOUR('',#282540); +#304188 = CURVE_STYLE('',#304189,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304189 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304190 = STYLED_ITEM('color',(#304191),#101867); +#304191 = PRESENTATION_STYLE_ASSIGNMENT((#304192,#304197)); +#304192 = SURFACE_STYLE_USAGE(.BOTH.,#304193); +#304193 = SURFACE_SIDE_STYLE('',(#304194)); +#304194 = SURFACE_STYLE_FILL_AREA(#304195); +#304195 = FILL_AREA_STYLE('',(#304196)); +#304196 = FILL_AREA_STYLE_COLOUR('',#279624); +#304197 = CURVE_STYLE('',#304198,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304198 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304199 = STYLED_ITEM('color',(#304200),#101897); +#304200 = PRESENTATION_STYLE_ASSIGNMENT((#304201,#304206)); +#304201 = SURFACE_STYLE_USAGE(.BOTH.,#304202); +#304202 = SURFACE_SIDE_STYLE('',(#304203)); +#304203 = SURFACE_STYLE_FILL_AREA(#304204); +#304204 = FILL_AREA_STYLE('',(#304205)); +#304205 = FILL_AREA_STYLE_COLOUR('',#279624); +#304206 = CURVE_STYLE('',#304207,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304207 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304208 = STYLED_ITEM('color',(#304209),#101920); +#304209 = PRESENTATION_STYLE_ASSIGNMENT((#304210,#304215)); +#304210 = SURFACE_STYLE_USAGE(.BOTH.,#304211); +#304211 = SURFACE_SIDE_STYLE('',(#304212)); +#304212 = SURFACE_STYLE_FILL_AREA(#304213); +#304213 = FILL_AREA_STYLE('',(#304214)); +#304214 = FILL_AREA_STYLE_COLOUR('',#279624); +#304215 = CURVE_STYLE('',#304216,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304216 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304217 = STYLED_ITEM('color',(#304218),#101943); +#304218 = PRESENTATION_STYLE_ASSIGNMENT((#304219,#304224)); +#304219 = SURFACE_STYLE_USAGE(.BOTH.,#304220); +#304220 = SURFACE_SIDE_STYLE('',(#304221)); +#304221 = SURFACE_STYLE_FILL_AREA(#304222); +#304222 = FILL_AREA_STYLE('',(#304223)); +#304223 = FILL_AREA_STYLE_COLOUR('',#279624); +#304224 = CURVE_STYLE('',#304225,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304225 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304226 = STYLED_ITEM('color',(#304227),#101966); +#304227 = PRESENTATION_STYLE_ASSIGNMENT((#304228,#304233)); +#304228 = SURFACE_STYLE_USAGE(.BOTH.,#304229); +#304229 = SURFACE_SIDE_STYLE('',(#304230)); +#304230 = SURFACE_STYLE_FILL_AREA(#304231); +#304231 = FILL_AREA_STYLE('',(#304232)); +#304232 = FILL_AREA_STYLE_COLOUR('',#279624); +#304233 = CURVE_STYLE('',#304234,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304234 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304235 = STYLED_ITEM('color',(#304236),#101989); +#304236 = PRESENTATION_STYLE_ASSIGNMENT((#304237,#304242)); +#304237 = SURFACE_STYLE_USAGE(.BOTH.,#304238); +#304238 = SURFACE_SIDE_STYLE('',(#304239)); +#304239 = SURFACE_STYLE_FILL_AREA(#304240); +#304240 = FILL_AREA_STYLE('',(#304241)); +#304241 = FILL_AREA_STYLE_COLOUR('',#279624); +#304242 = CURVE_STYLE('',#304243,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304243 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304244 = STYLED_ITEM('color',(#304245),#102012); +#304245 = PRESENTATION_STYLE_ASSIGNMENT((#304246,#304251)); +#304246 = SURFACE_STYLE_USAGE(.BOTH.,#304247); +#304247 = SURFACE_SIDE_STYLE('',(#304248)); +#304248 = SURFACE_STYLE_FILL_AREA(#304249); +#304249 = FILL_AREA_STYLE('',(#304250)); +#304250 = FILL_AREA_STYLE_COLOUR('',#279624); +#304251 = CURVE_STYLE('',#304252,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304252 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304253 = STYLED_ITEM('color',(#304254),#102045); +#304254 = PRESENTATION_STYLE_ASSIGNMENT((#304255,#304260)); +#304255 = SURFACE_STYLE_USAGE(.BOTH.,#304256); +#304256 = SURFACE_SIDE_STYLE('',(#304257)); +#304257 = SURFACE_STYLE_FILL_AREA(#304258); +#304258 = FILL_AREA_STYLE('',(#304259)); +#304259 = FILL_AREA_STYLE_COLOUR('',#279624); +#304260 = CURVE_STYLE('',#304261,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304261 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304262 = STYLED_ITEM('color',(#304263),#102068); +#304263 = PRESENTATION_STYLE_ASSIGNMENT((#304264,#304269)); +#304264 = SURFACE_STYLE_USAGE(.BOTH.,#304265); +#304265 = SURFACE_SIDE_STYLE('',(#304266)); +#304266 = SURFACE_STYLE_FILL_AREA(#304267); +#304267 = FILL_AREA_STYLE('',(#304268)); +#304268 = FILL_AREA_STYLE_COLOUR('',#279624); +#304269 = CURVE_STYLE('',#304270,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304270 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304271 = STYLED_ITEM('color',(#304272),#102091); +#304272 = PRESENTATION_STYLE_ASSIGNMENT((#304273,#304278)); +#304273 = SURFACE_STYLE_USAGE(.BOTH.,#304274); +#304274 = SURFACE_SIDE_STYLE('',(#304275)); +#304275 = SURFACE_STYLE_FILL_AREA(#304276); +#304276 = FILL_AREA_STYLE('',(#304277)); +#304277 = FILL_AREA_STYLE_COLOUR('',#279624); +#304278 = CURVE_STYLE('',#304279,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304279 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304280 = STYLED_ITEM('color',(#304281),#102179); +#304281 = PRESENTATION_STYLE_ASSIGNMENT((#304282,#304287)); +#304282 = SURFACE_STYLE_USAGE(.BOTH.,#304283); +#304283 = SURFACE_SIDE_STYLE('',(#304284)); +#304284 = SURFACE_STYLE_FILL_AREA(#304285); +#304285 = FILL_AREA_STYLE('',(#304286)); +#304286 = FILL_AREA_STYLE_COLOUR('',#282540); +#304287 = CURVE_STYLE('',#304288,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304288 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304289 = STYLED_ITEM('color',(#304290),#102254); +#304290 = PRESENTATION_STYLE_ASSIGNMENT((#304291,#304296)); +#304291 = SURFACE_STYLE_USAGE(.BOTH.,#304292); +#304292 = SURFACE_SIDE_STYLE('',(#304293)); +#304293 = SURFACE_STYLE_FILL_AREA(#304294); +#304294 = FILL_AREA_STYLE('',(#304295)); +#304295 = FILL_AREA_STYLE_COLOUR('',#282540); +#304296 = CURVE_STYLE('',#304297,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304297 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304298 = STYLED_ITEM('color',(#304299),#102278); +#304299 = PRESENTATION_STYLE_ASSIGNMENT((#304300,#304305)); +#304300 = SURFACE_STYLE_USAGE(.BOTH.,#304301); +#304301 = SURFACE_SIDE_STYLE('',(#304302)); +#304302 = SURFACE_STYLE_FILL_AREA(#304303); +#304303 = FILL_AREA_STYLE('',(#304304)); +#304304 = FILL_AREA_STYLE_COLOUR('',#282540); +#304305 = CURVE_STYLE('',#304306,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304306 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304307 = STYLED_ITEM('color',(#304308),#102346); +#304308 = PRESENTATION_STYLE_ASSIGNMENT((#304309,#304314)); +#304309 = SURFACE_STYLE_USAGE(.BOTH.,#304310); +#304310 = SURFACE_SIDE_STYLE('',(#304311)); +#304311 = SURFACE_STYLE_FILL_AREA(#304312); +#304312 = FILL_AREA_STYLE('',(#304313)); +#304313 = FILL_AREA_STYLE_COLOUR('',#279624); +#304314 = CURVE_STYLE('',#304315,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304315 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304316 = STYLED_ITEM('color',(#304317),#102434); +#304317 = PRESENTATION_STYLE_ASSIGNMENT((#304318,#304323)); +#304318 = SURFACE_STYLE_USAGE(.BOTH.,#304319); +#304319 = SURFACE_SIDE_STYLE('',(#304320)); +#304320 = SURFACE_STYLE_FILL_AREA(#304321); +#304321 = FILL_AREA_STYLE('',(#304322)); +#304322 = FILL_AREA_STYLE_COLOUR('',#279624); +#304323 = CURVE_STYLE('',#304324,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304324 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304325 = STYLED_ITEM('color',(#304326),#102450); +#304326 = PRESENTATION_STYLE_ASSIGNMENT((#304327,#304332)); +#304327 = SURFACE_STYLE_USAGE(.BOTH.,#304328); +#304328 = SURFACE_SIDE_STYLE('',(#304329)); +#304329 = SURFACE_STYLE_FILL_AREA(#304330); +#304330 = FILL_AREA_STYLE('',(#304331)); +#304331 = FILL_AREA_STYLE_COLOUR('',#279624); +#304332 = CURVE_STYLE('',#304333,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304333 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304334 = STYLED_ITEM('color',(#304335),#102466); +#304335 = PRESENTATION_STYLE_ASSIGNMENT((#304336,#304341)); +#304336 = SURFACE_STYLE_USAGE(.BOTH.,#304337); +#304337 = SURFACE_SIDE_STYLE('',(#304338)); +#304338 = SURFACE_STYLE_FILL_AREA(#304339); +#304339 = FILL_AREA_STYLE('',(#304340)); +#304340 = FILL_AREA_STYLE_COLOUR('',#279624); +#304341 = CURVE_STYLE('',#304342,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304342 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304343 = STYLED_ITEM('color',(#304344),#102482); +#304344 = PRESENTATION_STYLE_ASSIGNMENT((#304345,#304350)); +#304345 = SURFACE_STYLE_USAGE(.BOTH.,#304346); +#304346 = SURFACE_SIDE_STYLE('',(#304347)); +#304347 = SURFACE_STYLE_FILL_AREA(#304348); +#304348 = FILL_AREA_STYLE('',(#304349)); +#304349 = FILL_AREA_STYLE_COLOUR('',#279624); +#304350 = CURVE_STYLE('',#304351,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304351 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304352 = STYLED_ITEM('color',(#304353),#102498); +#304353 = PRESENTATION_STYLE_ASSIGNMENT((#304354,#304359)); +#304354 = SURFACE_STYLE_USAGE(.BOTH.,#304355); +#304355 = SURFACE_SIDE_STYLE('',(#304356)); +#304356 = SURFACE_STYLE_FILL_AREA(#304357); +#304357 = FILL_AREA_STYLE('',(#304358)); +#304358 = FILL_AREA_STYLE_COLOUR('',#279624); +#304359 = CURVE_STYLE('',#304360,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304360 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304361 = STYLED_ITEM('color',(#304362),#102515); +#304362 = PRESENTATION_STYLE_ASSIGNMENT((#304363,#304368)); +#304363 = SURFACE_STYLE_USAGE(.BOTH.,#304364); +#304364 = SURFACE_SIDE_STYLE('',(#304365)); +#304365 = SURFACE_STYLE_FILL_AREA(#304366); +#304366 = FILL_AREA_STYLE('',(#304367)); +#304367 = FILL_AREA_STYLE_COLOUR('',#282540); +#304368 = CURVE_STYLE('',#304369,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304369 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304370 = STYLED_ITEM('color',(#304371),#102548); +#304371 = PRESENTATION_STYLE_ASSIGNMENT((#304372,#304377)); +#304372 = SURFACE_STYLE_USAGE(.BOTH.,#304373); +#304373 = SURFACE_SIDE_STYLE('',(#304374)); +#304374 = SURFACE_STYLE_FILL_AREA(#304375); +#304375 = FILL_AREA_STYLE('',(#304376)); +#304376 = FILL_AREA_STYLE_COLOUR('',#279624); +#304377 = CURVE_STYLE('',#304378,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304378 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304379 = STYLED_ITEM('color',(#304380),#102565); +#304380 = PRESENTATION_STYLE_ASSIGNMENT((#304381,#304386)); +#304381 = SURFACE_STYLE_USAGE(.BOTH.,#304382); +#304382 = SURFACE_SIDE_STYLE('',(#304383)); +#304383 = SURFACE_STYLE_FILL_AREA(#304384); +#304384 = FILL_AREA_STYLE('',(#304385)); +#304385 = FILL_AREA_STYLE_COLOUR('',#282540); +#304386 = CURVE_STYLE('',#304387,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304387 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304388 = STYLED_ITEM('color',(#304389),#102587); +#304389 = PRESENTATION_STYLE_ASSIGNMENT((#304390,#304395)); +#304390 = SURFACE_STYLE_USAGE(.BOTH.,#304391); +#304391 = SURFACE_SIDE_STYLE('',(#304392)); +#304392 = SURFACE_STYLE_FILL_AREA(#304393); +#304393 = FILL_AREA_STYLE('',(#304394)); +#304394 = FILL_AREA_STYLE_COLOUR('',#279624); +#304395 = CURVE_STYLE('',#304396,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304396 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304397 = STYLED_ITEM('color',(#304398),#102618); +#304398 = PRESENTATION_STYLE_ASSIGNMENT((#304399,#304404)); +#304399 = SURFACE_STYLE_USAGE(.BOTH.,#304400); +#304400 = SURFACE_SIDE_STYLE('',(#304401)); +#304401 = SURFACE_STYLE_FILL_AREA(#304402); +#304402 = FILL_AREA_STYLE('',(#304403)); +#304403 = FILL_AREA_STYLE_COLOUR('',#279624); +#304404 = CURVE_STYLE('',#304405,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304405 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304406 = STYLED_ITEM('color',(#304407),#102641); +#304407 = PRESENTATION_STYLE_ASSIGNMENT((#304408,#304413)); +#304408 = SURFACE_STYLE_USAGE(.BOTH.,#304409); +#304409 = SURFACE_SIDE_STYLE('',(#304410)); +#304410 = SURFACE_STYLE_FILL_AREA(#304411); +#304411 = FILL_AREA_STYLE('',(#304412)); +#304412 = FILL_AREA_STYLE_COLOUR('',#279624); +#304413 = CURVE_STYLE('',#304414,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304414 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304415 = STYLED_ITEM('color',(#304416),#102664); +#304416 = PRESENTATION_STYLE_ASSIGNMENT((#304417,#304422)); +#304417 = SURFACE_STYLE_USAGE(.BOTH.,#304418); +#304418 = SURFACE_SIDE_STYLE('',(#304419)); +#304419 = SURFACE_STYLE_FILL_AREA(#304420); +#304420 = FILL_AREA_STYLE('',(#304421)); +#304421 = FILL_AREA_STYLE_COLOUR('',#279624); +#304422 = CURVE_STYLE('',#304423,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304423 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304424 = STYLED_ITEM('color',(#304425),#102687); +#304425 = PRESENTATION_STYLE_ASSIGNMENT((#304426,#304431)); +#304426 = SURFACE_STYLE_USAGE(.BOTH.,#304427); +#304427 = SURFACE_SIDE_STYLE('',(#304428)); +#304428 = SURFACE_STYLE_FILL_AREA(#304429); +#304429 = FILL_AREA_STYLE('',(#304430)); +#304430 = FILL_AREA_STYLE_COLOUR('',#279624); +#304431 = CURVE_STYLE('',#304432,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304432 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304433 = STYLED_ITEM('color',(#304434),#102717); +#304434 = PRESENTATION_STYLE_ASSIGNMENT((#304435,#304440)); +#304435 = SURFACE_STYLE_USAGE(.BOTH.,#304436); +#304436 = SURFACE_SIDE_STYLE('',(#304437)); +#304437 = SURFACE_STYLE_FILL_AREA(#304438); +#304438 = FILL_AREA_STYLE('',(#304439)); +#304439 = FILL_AREA_STYLE_COLOUR('',#282540); +#304440 = CURVE_STYLE('',#304441,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304441 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304442 = STYLED_ITEM('color',(#304443),#102734); +#304443 = PRESENTATION_STYLE_ASSIGNMENT((#304444,#304449)); +#304444 = SURFACE_STYLE_USAGE(.BOTH.,#304445); +#304445 = SURFACE_SIDE_STYLE('',(#304446)); +#304446 = SURFACE_STYLE_FILL_AREA(#304447); +#304447 = FILL_AREA_STYLE('',(#304448)); +#304448 = FILL_AREA_STYLE_COLOUR('',#282540); +#304449 = CURVE_STYLE('',#304450,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304450 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304451 = STYLED_ITEM('color',(#304452),#102751); +#304452 = PRESENTATION_STYLE_ASSIGNMENT((#304453,#304458)); +#304453 = SURFACE_STYLE_USAGE(.BOTH.,#304454); +#304454 = SURFACE_SIDE_STYLE('',(#304455)); +#304455 = SURFACE_STYLE_FILL_AREA(#304456); +#304456 = FILL_AREA_STYLE('',(#304457)); +#304457 = FILL_AREA_STYLE_COLOUR('',#282540); +#304458 = CURVE_STYLE('',#304459,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304459 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304460 = STYLED_ITEM('color',(#304461),#102768); +#304461 = PRESENTATION_STYLE_ASSIGNMENT((#304462,#304467)); +#304462 = SURFACE_STYLE_USAGE(.BOTH.,#304463); +#304463 = SURFACE_SIDE_STYLE('',(#304464)); +#304464 = SURFACE_STYLE_FILL_AREA(#304465); +#304465 = FILL_AREA_STYLE('',(#304466)); +#304466 = FILL_AREA_STYLE_COLOUR('',#282540); +#304467 = CURVE_STYLE('',#304468,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304468 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304469 = STYLED_ITEM('color',(#304470),#102785); +#304470 = PRESENTATION_STYLE_ASSIGNMENT((#304471,#304476)); +#304471 = SURFACE_STYLE_USAGE(.BOTH.,#304472); +#304472 = SURFACE_SIDE_STYLE('',(#304473)); +#304473 = SURFACE_STYLE_FILL_AREA(#304474); +#304474 = FILL_AREA_STYLE('',(#304475)); +#304475 = FILL_AREA_STYLE_COLOUR('',#282540); +#304476 = CURVE_STYLE('',#304477,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304477 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304478 = STYLED_ITEM('color',(#304479),#102802); +#304479 = PRESENTATION_STYLE_ASSIGNMENT((#304480,#304485)); +#304480 = SURFACE_STYLE_USAGE(.BOTH.,#304481); +#304481 = SURFACE_SIDE_STYLE('',(#304482)); +#304482 = SURFACE_STYLE_FILL_AREA(#304483); +#304483 = FILL_AREA_STYLE('',(#304484)); +#304484 = FILL_AREA_STYLE_COLOUR('',#282540); +#304485 = CURVE_STYLE('',#304486,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304486 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304487 = STYLED_ITEM('color',(#304488),#102819); +#304488 = PRESENTATION_STYLE_ASSIGNMENT((#304489,#304494)); +#304489 = SURFACE_STYLE_USAGE(.BOTH.,#304490); +#304490 = SURFACE_SIDE_STYLE('',(#304491)); +#304491 = SURFACE_STYLE_FILL_AREA(#304492); +#304492 = FILL_AREA_STYLE('',(#304493)); +#304493 = FILL_AREA_STYLE_COLOUR('',#282540); +#304494 = CURVE_STYLE('',#304495,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304495 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304496 = STYLED_ITEM('color',(#304497),#102836); +#304497 = PRESENTATION_STYLE_ASSIGNMENT((#304498,#304503)); +#304498 = SURFACE_STYLE_USAGE(.BOTH.,#304499); +#304499 = SURFACE_SIDE_STYLE('',(#304500)); +#304500 = SURFACE_STYLE_FILL_AREA(#304501); +#304501 = FILL_AREA_STYLE('',(#304502)); +#304502 = FILL_AREA_STYLE_COLOUR('',#282540); +#304503 = CURVE_STYLE('',#304504,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304504 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304505 = STYLED_ITEM('color',(#304506),#102848); +#304506 = PRESENTATION_STYLE_ASSIGNMENT((#304507,#304512)); +#304507 = SURFACE_STYLE_USAGE(.BOTH.,#304508); +#304508 = SURFACE_SIDE_STYLE('',(#304509)); +#304509 = SURFACE_STYLE_FILL_AREA(#304510); +#304510 = FILL_AREA_STYLE('',(#304511)); +#304511 = FILL_AREA_STYLE_COLOUR('',#279624); +#304512 = CURVE_STYLE('',#304513,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304513 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304514 = STYLED_ITEM('color',(#304515),#102871); +#304515 = PRESENTATION_STYLE_ASSIGNMENT((#304516,#304521)); +#304516 = SURFACE_STYLE_USAGE(.BOTH.,#304517); +#304517 = SURFACE_SIDE_STYLE('',(#304518)); +#304518 = SURFACE_STYLE_FILL_AREA(#304519); +#304519 = FILL_AREA_STYLE('',(#304520)); +#304520 = FILL_AREA_STYLE_COLOUR('',#279624); +#304521 = CURVE_STYLE('',#304522,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304522 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304523 = STYLED_ITEM('color',(#304524),#102894); +#304524 = PRESENTATION_STYLE_ASSIGNMENT((#304525,#304530)); +#304525 = SURFACE_STYLE_USAGE(.BOTH.,#304526); +#304526 = SURFACE_SIDE_STYLE('',(#304527)); +#304527 = SURFACE_STYLE_FILL_AREA(#304528); +#304528 = FILL_AREA_STYLE('',(#304529)); +#304529 = FILL_AREA_STYLE_COLOUR('',#279624); +#304530 = CURVE_STYLE('',#304531,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304531 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304532 = STYLED_ITEM('color',(#304533),#102911); +#304533 = PRESENTATION_STYLE_ASSIGNMENT((#304534,#304539)); +#304534 = SURFACE_STYLE_USAGE(.BOTH.,#304535); +#304535 = SURFACE_SIDE_STYLE('',(#304536)); +#304536 = SURFACE_STYLE_FILL_AREA(#304537); +#304537 = FILL_AREA_STYLE('',(#304538)); +#304538 = FILL_AREA_STYLE_COLOUR('',#282540); +#304539 = CURVE_STYLE('',#304540,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304540 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304541 = STYLED_ITEM('color',(#304542),#102986); +#304542 = PRESENTATION_STYLE_ASSIGNMENT((#304543,#304548)); +#304543 = SURFACE_STYLE_USAGE(.BOTH.,#304544); +#304544 = SURFACE_SIDE_STYLE('',(#304545)); +#304545 = SURFACE_STYLE_FILL_AREA(#304546); +#304546 = FILL_AREA_STYLE('',(#304547)); +#304547 = FILL_AREA_STYLE_COLOUR('',#282540); +#304548 = CURVE_STYLE('',#304549,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304549 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304550 = STYLED_ITEM('color',(#304551),#103010); +#304551 = PRESENTATION_STYLE_ASSIGNMENT((#304552,#304557)); +#304552 = SURFACE_STYLE_USAGE(.BOTH.,#304553); +#304553 = SURFACE_SIDE_STYLE('',(#304554)); +#304554 = SURFACE_STYLE_FILL_AREA(#304555); +#304555 = FILL_AREA_STYLE('',(#304556)); +#304556 = FILL_AREA_STYLE_COLOUR('',#282540); +#304557 = CURVE_STYLE('',#304558,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304558 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304559 = STYLED_ITEM('color',(#304560),#103078); +#304560 = PRESENTATION_STYLE_ASSIGNMENT((#304561,#304566)); +#304561 = SURFACE_STYLE_USAGE(.BOTH.,#304562); +#304562 = SURFACE_SIDE_STYLE('',(#304563)); +#304563 = SURFACE_STYLE_FILL_AREA(#304564); +#304564 = FILL_AREA_STYLE('',(#304565)); +#304565 = FILL_AREA_STYLE_COLOUR('',#282540); +#304566 = CURVE_STYLE('',#304567,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304567 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304568 = STYLED_ITEM('color',(#304569),#103095); +#304569 = PRESENTATION_STYLE_ASSIGNMENT((#304570,#304575)); +#304570 = SURFACE_STYLE_USAGE(.BOTH.,#304571); +#304571 = SURFACE_SIDE_STYLE('',(#304572)); +#304572 = SURFACE_STYLE_FILL_AREA(#304573); +#304573 = FILL_AREA_STYLE('',(#304574)); +#304574 = FILL_AREA_STYLE_COLOUR('',#279624); +#304575 = CURVE_STYLE('',#304576,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#304576 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304577 = STYLED_ITEM('color',(#304578),#103145); +#304578 = PRESENTATION_STYLE_ASSIGNMENT((#304579,#304584)); +#304579 = SURFACE_STYLE_USAGE(.BOTH.,#304580); +#304580 = SURFACE_SIDE_STYLE('',(#304581)); +#304581 = SURFACE_STYLE_FILL_AREA(#304582); +#304582 = FILL_AREA_STYLE('',(#304583)); +#304583 = FILL_AREA_STYLE_COLOUR('',#282540); +#304584 = CURVE_STYLE('',#304585,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304585 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304586 = STYLED_ITEM('color',(#304587),#103162); +#304587 = PRESENTATION_STYLE_ASSIGNMENT((#304588,#304593)); +#304588 = SURFACE_STYLE_USAGE(.BOTH.,#304589); +#304589 = SURFACE_SIDE_STYLE('',(#304590)); +#304590 = SURFACE_STYLE_FILL_AREA(#304591); +#304591 = FILL_AREA_STYLE('',(#304592)); +#304592 = FILL_AREA_STYLE_COLOUR('',#282540); +#304593 = CURVE_STYLE('',#304594,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304594 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304595 = STYLED_ITEM('color',(#304596),#103179); +#304596 = PRESENTATION_STYLE_ASSIGNMENT((#304597,#304602)); +#304597 = SURFACE_STYLE_USAGE(.BOTH.,#304598); +#304598 = SURFACE_SIDE_STYLE('',(#304599)); +#304599 = SURFACE_STYLE_FILL_AREA(#304600); +#304600 = FILL_AREA_STYLE('',(#304601)); +#304601 = FILL_AREA_STYLE_COLOUR('',#282540); +#304602 = CURVE_STYLE('',#304603,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304603 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304604 = STYLED_ITEM('color',(#304605),#103196); +#304605 = PRESENTATION_STYLE_ASSIGNMENT((#304606,#304611)); +#304606 = SURFACE_STYLE_USAGE(.BOTH.,#304607); +#304607 = SURFACE_SIDE_STYLE('',(#304608)); +#304608 = SURFACE_STYLE_FILL_AREA(#304609); +#304609 = FILL_AREA_STYLE('',(#304610)); +#304610 = FILL_AREA_STYLE_COLOUR('',#282540); +#304611 = CURVE_STYLE('',#304612,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304612 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304613 = STYLED_ITEM('color',(#304614),#103213); +#304614 = PRESENTATION_STYLE_ASSIGNMENT((#304615,#304620)); +#304615 = SURFACE_STYLE_USAGE(.BOTH.,#304616); +#304616 = SURFACE_SIDE_STYLE('',(#304617)); +#304617 = SURFACE_STYLE_FILL_AREA(#304618); +#304618 = FILL_AREA_STYLE('',(#304619)); +#304619 = FILL_AREA_STYLE_COLOUR('',#282540); +#304620 = CURVE_STYLE('',#304621,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304621 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304622 = STYLED_ITEM('color',(#304623),#103230); +#304623 = PRESENTATION_STYLE_ASSIGNMENT((#304624,#304629)); +#304624 = SURFACE_STYLE_USAGE(.BOTH.,#304625); +#304625 = SURFACE_SIDE_STYLE('',(#304626)); +#304626 = SURFACE_STYLE_FILL_AREA(#304627); +#304627 = FILL_AREA_STYLE('',(#304628)); +#304628 = FILL_AREA_STYLE_COLOUR('',#282540); +#304629 = CURVE_STYLE('',#304630,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#304630 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304631 = STYLED_ITEM('color',(#304632),#103242); +#304632 = PRESENTATION_STYLE_ASSIGNMENT((#304633,#304638)); +#304633 = SURFACE_STYLE_USAGE(.BOTH.,#304634); +#304634 = SURFACE_SIDE_STYLE('',(#304635)); +#304635 = SURFACE_STYLE_FILL_AREA(#304636); +#304636 = FILL_AREA_STYLE('',(#304637)); +#304637 = FILL_AREA_STYLE_COLOUR('',#282905); +#304638 = CURVE_STYLE('',#304639,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#304639 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304640 = STYLED_ITEM('color',(#304641),#103273); +#304641 = PRESENTATION_STYLE_ASSIGNMENT((#304642,#304647)); +#304642 = SURFACE_STYLE_USAGE(.BOTH.,#304643); +#304643 = SURFACE_SIDE_STYLE('',(#304644)); +#304644 = SURFACE_STYLE_FILL_AREA(#304645); +#304645 = FILL_AREA_STYLE('',(#304646)); +#304646 = FILL_AREA_STYLE_COLOUR('',#282905); +#304647 = CURVE_STYLE('',#304648,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#304648 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304649 = STYLED_ITEM('color',(#304650),#103297); +#304650 = PRESENTATION_STYLE_ASSIGNMENT((#304651,#304656)); +#304651 = SURFACE_STYLE_USAGE(.BOTH.,#304652); +#304652 = SURFACE_SIDE_STYLE('',(#304653)); +#304653 = SURFACE_STYLE_FILL_AREA(#304654); +#304654 = FILL_AREA_STYLE('',(#304655)); +#304655 = FILL_AREA_STYLE_COLOUR('',#282905); +#304656 = CURVE_STYLE('',#304657,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#304657 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304658 = STYLED_ITEM('color',(#304659),#103321); +#304659 = PRESENTATION_STYLE_ASSIGNMENT((#304660,#304665)); +#304660 = SURFACE_STYLE_USAGE(.BOTH.,#304661); +#304661 = SURFACE_SIDE_STYLE('',(#304662)); +#304662 = SURFACE_STYLE_FILL_AREA(#304663); +#304663 = FILL_AREA_STYLE('',(#304664)); +#304664 = FILL_AREA_STYLE_COLOUR('',#282905); +#304665 = CURVE_STYLE('',#304666,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#304666 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304667 = STYLED_ITEM('color',(#304668),#103338); +#304668 = PRESENTATION_STYLE_ASSIGNMENT((#304669,#304674)); +#304669 = SURFACE_STYLE_USAGE(.BOTH.,#304670); +#304670 = SURFACE_SIDE_STYLE('',(#304671)); +#304671 = SURFACE_STYLE_FILL_AREA(#304672); +#304672 = FILL_AREA_STYLE('',(#304673)); +#304673 = FILL_AREA_STYLE_COLOUR('',#282905); +#304674 = CURVE_STYLE('',#304675,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#304675 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304676 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #304677,#304684,#304691,#304698,#304705,#304712,#304719,#304726, + #304733,#304740,#304747,#304754,#304761,#304768,#304775,#304782, + #304789,#304796,#304803,#304810,#304817,#304824,#304831,#304838, + #304845,#304852,#304859,#304866),#15625); +#304677 = STYLED_ITEM('color',(#304678),#14773); +#304678 = PRESENTATION_STYLE_ASSIGNMENT((#304679)); +#304679 = SURFACE_STYLE_USAGE(.BOTH.,#304680); +#304680 = SURFACE_SIDE_STYLE('',(#304681)); +#304681 = SURFACE_STYLE_FILL_AREA(#304682); +#304682 = FILL_AREA_STYLE('',(#304683)); +#304683 = FILL_AREA_STYLE_COLOUR('',#282540); +#304684 = STYLED_ITEM('color',(#304685),#14849); +#304685 = PRESENTATION_STYLE_ASSIGNMENT((#304686)); +#304686 = SURFACE_STYLE_USAGE(.BOTH.,#304687); +#304687 = SURFACE_SIDE_STYLE('',(#304688)); +#304688 = SURFACE_STYLE_FILL_AREA(#304689); +#304689 = FILL_AREA_STYLE('',(#304690)); +#304690 = FILL_AREA_STYLE_COLOUR('',#282540); +#304691 = STYLED_ITEM('color',(#304692),#14880); +#304692 = PRESENTATION_STYLE_ASSIGNMENT((#304693)); +#304693 = SURFACE_STYLE_USAGE(.BOTH.,#304694); +#304694 = SURFACE_SIDE_STYLE('',(#304695)); +#304695 = SURFACE_STYLE_FILL_AREA(#304696); +#304696 = FILL_AREA_STYLE('',(#304697)); +#304697 = FILL_AREA_STYLE_COLOUR('',#282540); +#304698 = STYLED_ITEM('color',(#304699),#14905); +#304699 = PRESENTATION_STYLE_ASSIGNMENT((#304700)); +#304700 = SURFACE_STYLE_USAGE(.BOTH.,#304701); +#304701 = SURFACE_SIDE_STYLE('',(#304702)); +#304702 = SURFACE_STYLE_FILL_AREA(#304703); +#304703 = FILL_AREA_STYLE('',(#304704)); +#304704 = FILL_AREA_STYLE_COLOUR('',#282540); +#304705 = STYLED_ITEM('color',(#304706),#14930); +#304706 = PRESENTATION_STYLE_ASSIGNMENT((#304707)); +#304707 = SURFACE_STYLE_USAGE(.BOTH.,#304708); +#304708 = SURFACE_SIDE_STYLE('',(#304709)); +#304709 = SURFACE_STYLE_FILL_AREA(#304710); +#304710 = FILL_AREA_STYLE('',(#304711)); +#304711 = FILL_AREA_STYLE_COLOUR('',#282540); +#304712 = STYLED_ITEM('color',(#304713),#14954); +#304713 = PRESENTATION_STYLE_ASSIGNMENT((#304714)); +#304714 = SURFACE_STYLE_USAGE(.BOTH.,#304715); +#304715 = SURFACE_SIDE_STYLE('',(#304716)); +#304716 = SURFACE_STYLE_FILL_AREA(#304717); +#304717 = FILL_AREA_STYLE('',(#304718)); +#304718 = FILL_AREA_STYLE_COLOUR('',#282540); +#304719 = STYLED_ITEM('color',(#304720),#14978); +#304720 = PRESENTATION_STYLE_ASSIGNMENT((#304721)); +#304721 = SURFACE_STYLE_USAGE(.BOTH.,#304722); +#304722 = SURFACE_SIDE_STYLE('',(#304723)); +#304723 = SURFACE_STYLE_FILL_AREA(#304724); +#304724 = FILL_AREA_STYLE('',(#304725)); +#304725 = FILL_AREA_STYLE_COLOUR('',#282540); +#304726 = STYLED_ITEM('color',(#304727),#15003); +#304727 = PRESENTATION_STYLE_ASSIGNMENT((#304728)); +#304728 = SURFACE_STYLE_USAGE(.BOTH.,#304729); +#304729 = SURFACE_SIDE_STYLE('',(#304730)); +#304730 = SURFACE_STYLE_FILL_AREA(#304731); +#304731 = FILL_AREA_STYLE('',(#304732)); +#304732 = FILL_AREA_STYLE_COLOUR('',#282540); +#304733 = STYLED_ITEM('color',(#304734),#15028); +#304734 = PRESENTATION_STYLE_ASSIGNMENT((#304735)); +#304735 = SURFACE_STYLE_USAGE(.BOTH.,#304736); +#304736 = SURFACE_SIDE_STYLE('',(#304737)); +#304737 = SURFACE_STYLE_FILL_AREA(#304738); +#304738 = FILL_AREA_STYLE('',(#304739)); +#304739 = FILL_AREA_STYLE_COLOUR('',#282540); +#304740 = STYLED_ITEM('color',(#304741),#15045); +#304741 = PRESENTATION_STYLE_ASSIGNMENT((#304742)); +#304742 = SURFACE_STYLE_USAGE(.BOTH.,#304743); +#304743 = SURFACE_SIDE_STYLE('',(#304744)); +#304744 = SURFACE_STYLE_FILL_AREA(#304745); +#304745 = FILL_AREA_STYLE('',(#304746)); +#304746 = FILL_AREA_STYLE_COLOUR('',#282540); +#304747 = STYLED_ITEM('color',(#304748),#15131); +#304748 = PRESENTATION_STYLE_ASSIGNMENT((#304749)); +#304749 = SURFACE_STYLE_USAGE(.BOTH.,#304750); +#304750 = SURFACE_SIDE_STYLE('',(#304751)); +#304751 = SURFACE_STYLE_FILL_AREA(#304752); +#304752 = FILL_AREA_STYLE('',(#304753)); +#304753 = FILL_AREA_STYLE_COLOUR('',#294742); +#304754 = STYLED_ITEM('color',(#304755),#15163); +#304755 = PRESENTATION_STYLE_ASSIGNMENT((#304756)); +#304756 = SURFACE_STYLE_USAGE(.BOTH.,#304757); +#304757 = SURFACE_SIDE_STYLE('',(#304758)); +#304758 = SURFACE_STYLE_FILL_AREA(#304759); +#304759 = FILL_AREA_STYLE('',(#304760)); +#304760 = FILL_AREA_STYLE_COLOUR('',#294742); +#304761 = STYLED_ITEM('color',(#304762),#15187); +#304762 = PRESENTATION_STYLE_ASSIGNMENT((#304763)); +#304763 = SURFACE_STYLE_USAGE(.BOTH.,#304764); +#304764 = SURFACE_SIDE_STYLE('',(#304765)); +#304765 = SURFACE_STYLE_FILL_AREA(#304766); +#304766 = FILL_AREA_STYLE('',(#304767)); +#304767 = FILL_AREA_STYLE_COLOUR('',#294742); +#304768 = STYLED_ITEM('color',(#304769),#15212); +#304769 = PRESENTATION_STYLE_ASSIGNMENT((#304770)); +#304770 = SURFACE_STYLE_USAGE(.BOTH.,#304771); +#304771 = SURFACE_SIDE_STYLE('',(#304772)); +#304772 = SURFACE_STYLE_FILL_AREA(#304773); +#304773 = FILL_AREA_STYLE('',(#304774)); +#304774 = FILL_AREA_STYLE_COLOUR('',#294742); +#304775 = STYLED_ITEM('color',(#304776),#15236); +#304776 = PRESENTATION_STYLE_ASSIGNMENT((#304777)); +#304777 = SURFACE_STYLE_USAGE(.BOTH.,#304778); +#304778 = SURFACE_SIDE_STYLE('',(#304779)); +#304779 = SURFACE_STYLE_FILL_AREA(#304780); +#304780 = FILL_AREA_STYLE('',(#304781)); +#304781 = FILL_AREA_STYLE_COLOUR('',#294742); +#304782 = STYLED_ITEM('color',(#304783),#15261); +#304783 = PRESENTATION_STYLE_ASSIGNMENT((#304784)); +#304784 = SURFACE_STYLE_USAGE(.BOTH.,#304785); +#304785 = SURFACE_SIDE_STYLE('',(#304786)); +#304786 = SURFACE_STYLE_FILL_AREA(#304787); +#304787 = FILL_AREA_STYLE('',(#304788)); +#304788 = FILL_AREA_STYLE_COLOUR('',#294742); +#304789 = STYLED_ITEM('color',(#304790),#15285); +#304790 = PRESENTATION_STYLE_ASSIGNMENT((#304791)); +#304791 = SURFACE_STYLE_USAGE(.BOTH.,#304792); +#304792 = SURFACE_SIDE_STYLE('',(#304793)); +#304793 = SURFACE_STYLE_FILL_AREA(#304794); +#304794 = FILL_AREA_STYLE('',(#304795)); +#304795 = FILL_AREA_STYLE_COLOUR('',#294742); +#304796 = STYLED_ITEM('color',(#304797),#15310); +#304797 = PRESENTATION_STYLE_ASSIGNMENT((#304798)); +#304798 = SURFACE_STYLE_USAGE(.BOTH.,#304799); +#304799 = SURFACE_SIDE_STYLE('',(#304800)); +#304800 = SURFACE_STYLE_FILL_AREA(#304801); +#304801 = FILL_AREA_STYLE('',(#304802)); +#304802 = FILL_AREA_STYLE_COLOUR('',#294742); +#304803 = STYLED_ITEM('color',(#304804),#15327); +#304804 = PRESENTATION_STYLE_ASSIGNMENT((#304805)); +#304805 = SURFACE_STYLE_USAGE(.BOTH.,#304806); +#304806 = SURFACE_SIDE_STYLE('',(#304807)); +#304807 = SURFACE_STYLE_FILL_AREA(#304808); +#304808 = FILL_AREA_STYLE('',(#304809)); +#304809 = FILL_AREA_STYLE_COLOUR('',#282540); +#304810 = STYLED_ITEM('color',(#304811),#15413); +#304811 = PRESENTATION_STYLE_ASSIGNMENT((#304812)); +#304812 = SURFACE_STYLE_USAGE(.BOTH.,#304813); +#304813 = SURFACE_SIDE_STYLE('',(#304814)); +#304814 = SURFACE_STYLE_FILL_AREA(#304815); +#304815 = FILL_AREA_STYLE('',(#304816)); +#304816 = FILL_AREA_STYLE_COLOUR('',#282540); +#304817 = STYLED_ITEM('color',(#304818),#15444); +#304818 = PRESENTATION_STYLE_ASSIGNMENT((#304819)); +#304819 = SURFACE_STYLE_USAGE(.BOTH.,#304820); +#304820 = SURFACE_SIDE_STYLE('',(#304821)); +#304821 = SURFACE_STYLE_FILL_AREA(#304822); +#304822 = FILL_AREA_STYLE('',(#304823)); +#304823 = FILL_AREA_STYLE_COLOUR('',#282540); +#304824 = STYLED_ITEM('color',(#304825),#15469); +#304825 = PRESENTATION_STYLE_ASSIGNMENT((#304826)); +#304826 = SURFACE_STYLE_USAGE(.BOTH.,#304827); +#304827 = SURFACE_SIDE_STYLE('',(#304828)); +#304828 = SURFACE_STYLE_FILL_AREA(#304829); +#304829 = FILL_AREA_STYLE('',(#304830)); +#304830 = FILL_AREA_STYLE_COLOUR('',#282540); +#304831 = STYLED_ITEM('color',(#304832),#15494); +#304832 = PRESENTATION_STYLE_ASSIGNMENT((#304833)); +#304833 = SURFACE_STYLE_USAGE(.BOTH.,#304834); +#304834 = SURFACE_SIDE_STYLE('',(#304835)); +#304835 = SURFACE_STYLE_FILL_AREA(#304836); +#304836 = FILL_AREA_STYLE('',(#304837)); +#304837 = FILL_AREA_STYLE_COLOUR('',#282540); +#304838 = STYLED_ITEM('color',(#304839),#15518); +#304839 = PRESENTATION_STYLE_ASSIGNMENT((#304840)); +#304840 = SURFACE_STYLE_USAGE(.BOTH.,#304841); +#304841 = SURFACE_SIDE_STYLE('',(#304842)); +#304842 = SURFACE_STYLE_FILL_AREA(#304843); +#304843 = FILL_AREA_STYLE('',(#304844)); +#304844 = FILL_AREA_STYLE_COLOUR('',#282540); +#304845 = STYLED_ITEM('color',(#304846),#15542); +#304846 = PRESENTATION_STYLE_ASSIGNMENT((#304847)); +#304847 = SURFACE_STYLE_USAGE(.BOTH.,#304848); +#304848 = SURFACE_SIDE_STYLE('',(#304849)); +#304849 = SURFACE_STYLE_FILL_AREA(#304850); +#304850 = FILL_AREA_STYLE('',(#304851)); +#304851 = FILL_AREA_STYLE_COLOUR('',#282540); +#304852 = STYLED_ITEM('color',(#304853),#15567); +#304853 = PRESENTATION_STYLE_ASSIGNMENT((#304854)); +#304854 = SURFACE_STYLE_USAGE(.BOTH.,#304855); +#304855 = SURFACE_SIDE_STYLE('',(#304856)); +#304856 = SURFACE_STYLE_FILL_AREA(#304857); +#304857 = FILL_AREA_STYLE('',(#304858)); +#304858 = FILL_AREA_STYLE_COLOUR('',#282540); +#304859 = STYLED_ITEM('color',(#304860),#15592); +#304860 = PRESENTATION_STYLE_ASSIGNMENT((#304861)); +#304861 = SURFACE_STYLE_USAGE(.BOTH.,#304862); +#304862 = SURFACE_SIDE_STYLE('',(#304863)); +#304863 = SURFACE_STYLE_FILL_AREA(#304864); +#304864 = FILL_AREA_STYLE('',(#304865)); +#304865 = FILL_AREA_STYLE_COLOUR('',#282540); +#304866 = STYLED_ITEM('color',(#304867),#15609); +#304867 = PRESENTATION_STYLE_ASSIGNMENT((#304868)); +#304868 = SURFACE_STYLE_USAGE(.BOTH.,#304869); +#304869 = SURFACE_SIDE_STYLE('',(#304870)); +#304870 = SURFACE_STYLE_FILL_AREA(#304871); +#304871 = FILL_AREA_STYLE('',(#304872)); +#304872 = FILL_AREA_STYLE_COLOUR('',#282540); +#304873 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #304874,#304881,#304888,#304895,#304902,#304909,#304916,#304923, + #304930,#304937,#304944,#304951,#304958,#304965,#304972,#304979, + #304986,#304993,#305000,#305007,#305014,#305021,#305028,#305035, + #305042,#305049,#305056,#305063,#305070,#305077,#305084,#305091, + #305098,#305105,#305112,#305119,#305126,#305133,#305140,#305147, + #305154,#305161,#305168,#305175,#305182,#305189,#305196,#305203, + #305210,#305217,#305224,#305231,#305238,#305245,#305252,#305259, + #305266,#305273,#305280,#305287,#305294,#305301,#305308,#305315, + #305322,#305329,#305336,#305343,#305350,#305357,#305364,#305371, + #305378,#305385,#305392,#305399),#55982); +#304874 = STYLED_ITEM('color',(#304875),#53878); +#304875 = PRESENTATION_STYLE_ASSIGNMENT((#304876)); +#304876 = SURFACE_STYLE_USAGE(.BOTH.,#304877); +#304877 = SURFACE_SIDE_STYLE('',(#304878)); +#304878 = SURFACE_STYLE_FILL_AREA(#304879); +#304879 = FILL_AREA_STYLE('',(#304880)); +#304880 = FILL_AREA_STYLE_COLOUR('',#279624); +#304881 = STYLED_ITEM('color',(#304882),#53918); +#304882 = PRESENTATION_STYLE_ASSIGNMENT((#304883)); +#304883 = SURFACE_STYLE_USAGE(.BOTH.,#304884); +#304884 = SURFACE_SIDE_STYLE('',(#304885)); +#304885 = SURFACE_STYLE_FILL_AREA(#304886); +#304886 = FILL_AREA_STYLE('',(#304887)); +#304887 = FILL_AREA_STYLE_COLOUR('',#279624); +#304888 = STYLED_ITEM('color',(#304889),#53949); +#304889 = PRESENTATION_STYLE_ASSIGNMENT((#304890)); +#304890 = SURFACE_STYLE_USAGE(.BOTH.,#304891); +#304891 = SURFACE_SIDE_STYLE('',(#304892)); +#304892 = SURFACE_STYLE_FILL_AREA(#304893); +#304893 = FILL_AREA_STYLE('',(#304894)); +#304894 = FILL_AREA_STYLE_COLOUR('',#279624); +#304895 = STYLED_ITEM('color',(#304896),#53980); +#304896 = PRESENTATION_STYLE_ASSIGNMENT((#304897)); +#304897 = SURFACE_STYLE_USAGE(.BOTH.,#304898); +#304898 = SURFACE_SIDE_STYLE('',(#304899)); +#304899 = SURFACE_STYLE_FILL_AREA(#304900); +#304900 = FILL_AREA_STYLE('',(#304901)); +#304901 = FILL_AREA_STYLE_COLOUR('',#279624); +#304902 = STYLED_ITEM('color',(#304903),#54227); +#304903 = PRESENTATION_STYLE_ASSIGNMENT((#304904)); +#304904 = SURFACE_STYLE_USAGE(.BOTH.,#304905); +#304905 = SURFACE_SIDE_STYLE('',(#304906)); +#304906 = SURFACE_STYLE_FILL_AREA(#304907); +#304907 = FILL_AREA_STYLE('',(#304908)); +#304908 = FILL_AREA_STYLE_COLOUR('',#279624); +#304909 = STYLED_ITEM('color',(#304910),#54474); +#304910 = PRESENTATION_STYLE_ASSIGNMENT((#304911)); +#304911 = SURFACE_STYLE_USAGE(.BOTH.,#304912); +#304912 = SURFACE_SIDE_STYLE('',(#304913)); +#304913 = SURFACE_STYLE_FILL_AREA(#304914); +#304914 = FILL_AREA_STYLE('',(#304915)); +#304915 = FILL_AREA_STYLE_COLOUR('',#279624); +#304916 = STYLED_ITEM('color',(#304917),#54491); +#304917 = PRESENTATION_STYLE_ASSIGNMENT((#304918)); +#304918 = SURFACE_STYLE_USAGE(.BOTH.,#304919); +#304919 = SURFACE_SIDE_STYLE('',(#304920)); +#304920 = SURFACE_STYLE_FILL_AREA(#304921); +#304921 = FILL_AREA_STYLE('',(#304922)); +#304922 = FILL_AREA_STYLE_COLOUR('',#279624); +#304923 = STYLED_ITEM('color',(#304924),#54508); +#304924 = PRESENTATION_STYLE_ASSIGNMENT((#304925)); +#304925 = SURFACE_STYLE_USAGE(.BOTH.,#304926); +#304926 = SURFACE_SIDE_STYLE('',(#304927)); +#304927 = SURFACE_STYLE_FILL_AREA(#304928); +#304928 = FILL_AREA_STYLE('',(#304929)); +#304929 = FILL_AREA_STYLE_COLOUR('',#279624); +#304930 = STYLED_ITEM('color',(#304931),#54525); +#304931 = PRESENTATION_STYLE_ASSIGNMENT((#304932)); +#304932 = SURFACE_STYLE_USAGE(.BOTH.,#304933); +#304933 = SURFACE_SIDE_STYLE('',(#304934)); +#304934 = SURFACE_STYLE_FILL_AREA(#304935); +#304935 = FILL_AREA_STYLE('',(#304936)); +#304936 = FILL_AREA_STYLE_COLOUR('',#279624); +#304937 = STYLED_ITEM('color',(#304938),#54542); +#304938 = PRESENTATION_STYLE_ASSIGNMENT((#304939)); +#304939 = SURFACE_STYLE_USAGE(.BOTH.,#304940); +#304940 = SURFACE_SIDE_STYLE('',(#304941)); +#304941 = SURFACE_STYLE_FILL_AREA(#304942); +#304942 = FILL_AREA_STYLE('',(#304943)); +#304943 = FILL_AREA_STYLE_COLOUR('',#279624); +#304944 = STYLED_ITEM('color',(#304945),#54559); +#304945 = PRESENTATION_STYLE_ASSIGNMENT((#304946)); +#304946 = SURFACE_STYLE_USAGE(.BOTH.,#304947); +#304947 = SURFACE_SIDE_STYLE('',(#304948)); +#304948 = SURFACE_STYLE_FILL_AREA(#304949); +#304949 = FILL_AREA_STYLE('',(#304950)); +#304950 = FILL_AREA_STYLE_COLOUR('',#279624); +#304951 = STYLED_ITEM('color',(#304952),#54576); +#304952 = PRESENTATION_STYLE_ASSIGNMENT((#304953)); +#304953 = SURFACE_STYLE_USAGE(.BOTH.,#304954); +#304954 = SURFACE_SIDE_STYLE('',(#304955)); +#304955 = SURFACE_STYLE_FILL_AREA(#304956); +#304956 = FILL_AREA_STYLE('',(#304957)); +#304957 = FILL_AREA_STYLE_COLOUR('',#279624); +#304958 = STYLED_ITEM('color',(#304959),#54593); +#304959 = PRESENTATION_STYLE_ASSIGNMENT((#304960)); +#304960 = SURFACE_STYLE_USAGE(.BOTH.,#304961); +#304961 = SURFACE_SIDE_STYLE('',(#304962)); +#304962 = SURFACE_STYLE_FILL_AREA(#304963); +#304963 = FILL_AREA_STYLE('',(#304964)); +#304964 = FILL_AREA_STYLE_COLOUR('',#279624); +#304965 = STYLED_ITEM('color',(#304966),#54610); +#304966 = PRESENTATION_STYLE_ASSIGNMENT((#304967)); +#304967 = SURFACE_STYLE_USAGE(.BOTH.,#304968); +#304968 = SURFACE_SIDE_STYLE('',(#304969)); +#304969 = SURFACE_STYLE_FILL_AREA(#304970); +#304970 = FILL_AREA_STYLE('',(#304971)); +#304971 = FILL_AREA_STYLE_COLOUR('',#279624); +#304972 = STYLED_ITEM('color',(#304973),#54627); +#304973 = PRESENTATION_STYLE_ASSIGNMENT((#304974)); +#304974 = SURFACE_STYLE_USAGE(.BOTH.,#304975); +#304975 = SURFACE_SIDE_STYLE('',(#304976)); +#304976 = SURFACE_STYLE_FILL_AREA(#304977); +#304977 = FILL_AREA_STYLE('',(#304978)); +#304978 = FILL_AREA_STYLE_COLOUR('',#279624); +#304979 = STYLED_ITEM('color',(#304980),#54644); +#304980 = PRESENTATION_STYLE_ASSIGNMENT((#304981)); +#304981 = SURFACE_STYLE_USAGE(.BOTH.,#304982); +#304982 = SURFACE_SIDE_STYLE('',(#304983)); +#304983 = SURFACE_STYLE_FILL_AREA(#304984); +#304984 = FILL_AREA_STYLE('',(#304985)); +#304985 = FILL_AREA_STYLE_COLOUR('',#279624); +#304986 = STYLED_ITEM('color',(#304987),#54661); +#304987 = PRESENTATION_STYLE_ASSIGNMENT((#304988)); +#304988 = SURFACE_STYLE_USAGE(.BOTH.,#304989); +#304989 = SURFACE_SIDE_STYLE('',(#304990)); +#304990 = SURFACE_STYLE_FILL_AREA(#304991); +#304991 = FILL_AREA_STYLE('',(#304992)); +#304992 = FILL_AREA_STYLE_COLOUR('',#279624); +#304993 = STYLED_ITEM('color',(#304994),#54678); +#304994 = PRESENTATION_STYLE_ASSIGNMENT((#304995)); +#304995 = SURFACE_STYLE_USAGE(.BOTH.,#304996); +#304996 = SURFACE_SIDE_STYLE('',(#304997)); +#304997 = SURFACE_STYLE_FILL_AREA(#304998); +#304998 = FILL_AREA_STYLE('',(#304999)); +#304999 = FILL_AREA_STYLE_COLOUR('',#279624); +#305000 = STYLED_ITEM('color',(#305001),#54695); +#305001 = PRESENTATION_STYLE_ASSIGNMENT((#305002)); +#305002 = SURFACE_STYLE_USAGE(.BOTH.,#305003); +#305003 = SURFACE_SIDE_STYLE('',(#305004)); +#305004 = SURFACE_STYLE_FILL_AREA(#305005); +#305005 = FILL_AREA_STYLE('',(#305006)); +#305006 = FILL_AREA_STYLE_COLOUR('',#279624); +#305007 = STYLED_ITEM('color',(#305008),#54712); +#305008 = PRESENTATION_STYLE_ASSIGNMENT((#305009)); +#305009 = SURFACE_STYLE_USAGE(.BOTH.,#305010); +#305010 = SURFACE_SIDE_STYLE('',(#305011)); +#305011 = SURFACE_STYLE_FILL_AREA(#305012); +#305012 = FILL_AREA_STYLE('',(#305013)); +#305013 = FILL_AREA_STYLE_COLOUR('',#279624); +#305014 = STYLED_ITEM('color',(#305015),#54729); +#305015 = PRESENTATION_STYLE_ASSIGNMENT((#305016)); +#305016 = SURFACE_STYLE_USAGE(.BOTH.,#305017); +#305017 = SURFACE_SIDE_STYLE('',(#305018)); +#305018 = SURFACE_STYLE_FILL_AREA(#305019); +#305019 = FILL_AREA_STYLE('',(#305020)); +#305020 = FILL_AREA_STYLE_COLOUR('',#279624); +#305021 = STYLED_ITEM('color',(#305022),#54746); +#305022 = PRESENTATION_STYLE_ASSIGNMENT((#305023)); +#305023 = SURFACE_STYLE_USAGE(.BOTH.,#305024); +#305024 = SURFACE_SIDE_STYLE('',(#305025)); +#305025 = SURFACE_STYLE_FILL_AREA(#305026); +#305026 = FILL_AREA_STYLE('',(#305027)); +#305027 = FILL_AREA_STYLE_COLOUR('',#279624); +#305028 = STYLED_ITEM('color',(#305029),#54758); +#305029 = PRESENTATION_STYLE_ASSIGNMENT((#305030)); +#305030 = SURFACE_STYLE_USAGE(.BOTH.,#305031); +#305031 = SURFACE_SIDE_STYLE('',(#305032)); +#305032 = SURFACE_STYLE_FILL_AREA(#305033); +#305033 = FILL_AREA_STYLE('',(#305034)); +#305034 = FILL_AREA_STYLE_COLOUR('',#280691); +#305035 = STYLED_ITEM('color',(#305036),#54789); +#305036 = PRESENTATION_STYLE_ASSIGNMENT((#305037)); +#305037 = SURFACE_STYLE_USAGE(.BOTH.,#305038); +#305038 = SURFACE_SIDE_STYLE('',(#305039)); +#305039 = SURFACE_STYLE_FILL_AREA(#305040); +#305040 = FILL_AREA_STYLE('',(#305041)); +#305041 = FILL_AREA_STYLE_COLOUR('',#280691); +#305042 = STYLED_ITEM('color',(#305043),#54813); +#305043 = PRESENTATION_STYLE_ASSIGNMENT((#305044)); +#305044 = SURFACE_STYLE_USAGE(.BOTH.,#305045); +#305045 = SURFACE_SIDE_STYLE('',(#305046)); +#305046 = SURFACE_STYLE_FILL_AREA(#305047); +#305047 = FILL_AREA_STYLE('',(#305048)); +#305048 = FILL_AREA_STYLE_COLOUR('',#280691); +#305049 = STYLED_ITEM('color',(#305050),#54837); +#305050 = PRESENTATION_STYLE_ASSIGNMENT((#305051)); +#305051 = SURFACE_STYLE_USAGE(.BOTH.,#305052); +#305052 = SURFACE_SIDE_STYLE('',(#305053)); +#305053 = SURFACE_STYLE_FILL_AREA(#305054); +#305054 = FILL_AREA_STYLE('',(#305055)); +#305055 = FILL_AREA_STYLE_COLOUR('',#280691); +#305056 = STYLED_ITEM('color',(#305057),#54854); +#305057 = PRESENTATION_STYLE_ASSIGNMENT((#305058)); +#305058 = SURFACE_STYLE_USAGE(.BOTH.,#305059); +#305059 = SURFACE_SIDE_STYLE('',(#305060)); +#305060 = SURFACE_STYLE_FILL_AREA(#305061); +#305061 = FILL_AREA_STYLE('',(#305062)); +#305062 = FILL_AREA_STYLE_COLOUR('',#280691); +#305063 = STYLED_ITEM('color',(#305064),#54885); +#305064 = PRESENTATION_STYLE_ASSIGNMENT((#305065)); +#305065 = SURFACE_STYLE_USAGE(.BOTH.,#305066); +#305066 = SURFACE_SIDE_STYLE('',(#305067)); +#305067 = SURFACE_STYLE_FILL_AREA(#305068); +#305068 = FILL_AREA_STYLE('',(#305069)); +#305069 = FILL_AREA_STYLE_COLOUR('',#280691); +#305070 = STYLED_ITEM('color',(#305071),#54909); +#305071 = PRESENTATION_STYLE_ASSIGNMENT((#305072)); +#305072 = SURFACE_STYLE_USAGE(.BOTH.,#305073); +#305073 = SURFACE_SIDE_STYLE('',(#305074)); +#305074 = SURFACE_STYLE_FILL_AREA(#305075); +#305075 = FILL_AREA_STYLE('',(#305076)); +#305076 = FILL_AREA_STYLE_COLOUR('',#280691); +#305077 = STYLED_ITEM('color',(#305078),#54933); +#305078 = PRESENTATION_STYLE_ASSIGNMENT((#305079)); +#305079 = SURFACE_STYLE_USAGE(.BOTH.,#305080); +#305080 = SURFACE_SIDE_STYLE('',(#305081)); +#305081 = SURFACE_STYLE_FILL_AREA(#305082); +#305082 = FILL_AREA_STYLE('',(#305083)); +#305083 = FILL_AREA_STYLE_COLOUR('',#280691); +#305084 = STYLED_ITEM('color',(#305085),#54950); +#305085 = PRESENTATION_STYLE_ASSIGNMENT((#305086)); +#305086 = SURFACE_STYLE_USAGE(.BOTH.,#305087); +#305087 = SURFACE_SIDE_STYLE('',(#305088)); +#305088 = SURFACE_STYLE_FILL_AREA(#305089); +#305089 = FILL_AREA_STYLE('',(#305090)); +#305090 = FILL_AREA_STYLE_COLOUR('',#280691); +#305091 = STYLED_ITEM('color',(#305092),#54981); +#305092 = PRESENTATION_STYLE_ASSIGNMENT((#305093)); +#305093 = SURFACE_STYLE_USAGE(.BOTH.,#305094); +#305094 = SURFACE_SIDE_STYLE('',(#305095)); +#305095 = SURFACE_STYLE_FILL_AREA(#305096); +#305096 = FILL_AREA_STYLE('',(#305097)); +#305097 = FILL_AREA_STYLE_COLOUR('',#280691); +#305098 = STYLED_ITEM('color',(#305099),#55005); +#305099 = PRESENTATION_STYLE_ASSIGNMENT((#305100)); +#305100 = SURFACE_STYLE_USAGE(.BOTH.,#305101); +#305101 = SURFACE_SIDE_STYLE('',(#305102)); +#305102 = SURFACE_STYLE_FILL_AREA(#305103); +#305103 = FILL_AREA_STYLE('',(#305104)); +#305104 = FILL_AREA_STYLE_COLOUR('',#280691); +#305105 = STYLED_ITEM('color',(#305106),#55029); +#305106 = PRESENTATION_STYLE_ASSIGNMENT((#305107)); +#305107 = SURFACE_STYLE_USAGE(.BOTH.,#305108); +#305108 = SURFACE_SIDE_STYLE('',(#305109)); +#305109 = SURFACE_STYLE_FILL_AREA(#305110); +#305110 = FILL_AREA_STYLE('',(#305111)); +#305111 = FILL_AREA_STYLE_COLOUR('',#280691); +#305112 = STYLED_ITEM('color',(#305113),#55046); +#305113 = PRESENTATION_STYLE_ASSIGNMENT((#305114)); +#305114 = SURFACE_STYLE_USAGE(.BOTH.,#305115); +#305115 = SURFACE_SIDE_STYLE('',(#305116)); +#305116 = SURFACE_STYLE_FILL_AREA(#305117); +#305117 = FILL_AREA_STYLE('',(#305118)); +#305118 = FILL_AREA_STYLE_COLOUR('',#280691); +#305119 = STYLED_ITEM('color',(#305120),#55077); +#305120 = PRESENTATION_STYLE_ASSIGNMENT((#305121)); +#305121 = SURFACE_STYLE_USAGE(.BOTH.,#305122); +#305122 = SURFACE_SIDE_STYLE('',(#305123)); +#305123 = SURFACE_STYLE_FILL_AREA(#305124); +#305124 = FILL_AREA_STYLE('',(#305125)); +#305125 = FILL_AREA_STYLE_COLOUR('',#280691); +#305126 = STYLED_ITEM('color',(#305127),#55101); +#305127 = PRESENTATION_STYLE_ASSIGNMENT((#305128)); +#305128 = SURFACE_STYLE_USAGE(.BOTH.,#305129); +#305129 = SURFACE_SIDE_STYLE('',(#305130)); +#305130 = SURFACE_STYLE_FILL_AREA(#305131); +#305131 = FILL_AREA_STYLE('',(#305132)); +#305132 = FILL_AREA_STYLE_COLOUR('',#280691); +#305133 = STYLED_ITEM('color',(#305134),#55125); +#305134 = PRESENTATION_STYLE_ASSIGNMENT((#305135)); +#305135 = SURFACE_STYLE_USAGE(.BOTH.,#305136); +#305136 = SURFACE_SIDE_STYLE('',(#305137)); +#305137 = SURFACE_STYLE_FILL_AREA(#305138); +#305138 = FILL_AREA_STYLE('',(#305139)); +#305139 = FILL_AREA_STYLE_COLOUR('',#280691); +#305140 = STYLED_ITEM('color',(#305141),#55142); +#305141 = PRESENTATION_STYLE_ASSIGNMENT((#305142)); +#305142 = SURFACE_STYLE_USAGE(.BOTH.,#305143); +#305143 = SURFACE_SIDE_STYLE('',(#305144)); +#305144 = SURFACE_STYLE_FILL_AREA(#305145); +#305145 = FILL_AREA_STYLE('',(#305146)); +#305146 = FILL_AREA_STYLE_COLOUR('',#280691); +#305147 = STYLED_ITEM('color',(#305148),#55173); +#305148 = PRESENTATION_STYLE_ASSIGNMENT((#305149)); +#305149 = SURFACE_STYLE_USAGE(.BOTH.,#305150); +#305150 = SURFACE_SIDE_STYLE('',(#305151)); +#305151 = SURFACE_STYLE_FILL_AREA(#305152); +#305152 = FILL_AREA_STYLE('',(#305153)); +#305153 = FILL_AREA_STYLE_COLOUR('',#280691); +#305154 = STYLED_ITEM('color',(#305155),#55197); +#305155 = PRESENTATION_STYLE_ASSIGNMENT((#305156)); +#305156 = SURFACE_STYLE_USAGE(.BOTH.,#305157); +#305157 = SURFACE_SIDE_STYLE('',(#305158)); +#305158 = SURFACE_STYLE_FILL_AREA(#305159); +#305159 = FILL_AREA_STYLE('',(#305160)); +#305160 = FILL_AREA_STYLE_COLOUR('',#280691); +#305161 = STYLED_ITEM('color',(#305162),#55221); +#305162 = PRESENTATION_STYLE_ASSIGNMENT((#305163)); +#305163 = SURFACE_STYLE_USAGE(.BOTH.,#305164); +#305164 = SURFACE_SIDE_STYLE('',(#305165)); +#305165 = SURFACE_STYLE_FILL_AREA(#305166); +#305166 = FILL_AREA_STYLE('',(#305167)); +#305167 = FILL_AREA_STYLE_COLOUR('',#280691); +#305168 = STYLED_ITEM('color',(#305169),#55238); +#305169 = PRESENTATION_STYLE_ASSIGNMENT((#305170)); +#305170 = SURFACE_STYLE_USAGE(.BOTH.,#305171); +#305171 = SURFACE_SIDE_STYLE('',(#305172)); +#305172 = SURFACE_STYLE_FILL_AREA(#305173); +#305173 = FILL_AREA_STYLE('',(#305174)); +#305174 = FILL_AREA_STYLE_COLOUR('',#280691); +#305175 = STYLED_ITEM('color',(#305176),#55269); +#305176 = PRESENTATION_STYLE_ASSIGNMENT((#305177)); +#305177 = SURFACE_STYLE_USAGE(.BOTH.,#305178); +#305178 = SURFACE_SIDE_STYLE('',(#305179)); +#305179 = SURFACE_STYLE_FILL_AREA(#305180); +#305180 = FILL_AREA_STYLE('',(#305181)); +#305181 = FILL_AREA_STYLE_COLOUR('',#280691); +#305182 = STYLED_ITEM('color',(#305183),#55293); +#305183 = PRESENTATION_STYLE_ASSIGNMENT((#305184)); +#305184 = SURFACE_STYLE_USAGE(.BOTH.,#305185); +#305185 = SURFACE_SIDE_STYLE('',(#305186)); +#305186 = SURFACE_STYLE_FILL_AREA(#305187); +#305187 = FILL_AREA_STYLE('',(#305188)); +#305188 = FILL_AREA_STYLE_COLOUR('',#280691); +#305189 = STYLED_ITEM('color',(#305190),#55317); +#305190 = PRESENTATION_STYLE_ASSIGNMENT((#305191)); +#305191 = SURFACE_STYLE_USAGE(.BOTH.,#305192); +#305192 = SURFACE_SIDE_STYLE('',(#305193)); +#305193 = SURFACE_STYLE_FILL_AREA(#305194); +#305194 = FILL_AREA_STYLE('',(#305195)); +#305195 = FILL_AREA_STYLE_COLOUR('',#280691); +#305196 = STYLED_ITEM('color',(#305197),#55334); +#305197 = PRESENTATION_STYLE_ASSIGNMENT((#305198)); +#305198 = SURFACE_STYLE_USAGE(.BOTH.,#305199); +#305199 = SURFACE_SIDE_STYLE('',(#305200)); +#305200 = SURFACE_STYLE_FILL_AREA(#305201); +#305201 = FILL_AREA_STYLE('',(#305202)); +#305202 = FILL_AREA_STYLE_COLOUR('',#280691); +#305203 = STYLED_ITEM('color',(#305204),#55365); +#305204 = PRESENTATION_STYLE_ASSIGNMENT((#305205)); +#305205 = SURFACE_STYLE_USAGE(.BOTH.,#305206); +#305206 = SURFACE_SIDE_STYLE('',(#305207)); +#305207 = SURFACE_STYLE_FILL_AREA(#305208); +#305208 = FILL_AREA_STYLE('',(#305209)); +#305209 = FILL_AREA_STYLE_COLOUR('',#280691); +#305210 = STYLED_ITEM('color',(#305211),#55389); +#305211 = PRESENTATION_STYLE_ASSIGNMENT((#305212)); +#305212 = SURFACE_STYLE_USAGE(.BOTH.,#305213); +#305213 = SURFACE_SIDE_STYLE('',(#305214)); +#305214 = SURFACE_STYLE_FILL_AREA(#305215); +#305215 = FILL_AREA_STYLE('',(#305216)); +#305216 = FILL_AREA_STYLE_COLOUR('',#280691); +#305217 = STYLED_ITEM('color',(#305218),#55413); +#305218 = PRESENTATION_STYLE_ASSIGNMENT((#305219)); +#305219 = SURFACE_STYLE_USAGE(.BOTH.,#305220); +#305220 = SURFACE_SIDE_STYLE('',(#305221)); +#305221 = SURFACE_STYLE_FILL_AREA(#305222); +#305222 = FILL_AREA_STYLE('',(#305223)); +#305223 = FILL_AREA_STYLE_COLOUR('',#280691); +#305224 = STYLED_ITEM('color',(#305225),#55430); +#305225 = PRESENTATION_STYLE_ASSIGNMENT((#305226)); +#305226 = SURFACE_STYLE_USAGE(.BOTH.,#305227); +#305227 = SURFACE_SIDE_STYLE('',(#305228)); +#305228 = SURFACE_STYLE_FILL_AREA(#305229); +#305229 = FILL_AREA_STYLE('',(#305230)); +#305230 = FILL_AREA_STYLE_COLOUR('',#280691); +#305231 = STYLED_ITEM('color',(#305232),#55461); +#305232 = PRESENTATION_STYLE_ASSIGNMENT((#305233)); +#305233 = SURFACE_STYLE_USAGE(.BOTH.,#305234); +#305234 = SURFACE_SIDE_STYLE('',(#305235)); +#305235 = SURFACE_STYLE_FILL_AREA(#305236); +#305236 = FILL_AREA_STYLE('',(#305237)); +#305237 = FILL_AREA_STYLE_COLOUR('',#280691); +#305238 = STYLED_ITEM('color',(#305239),#55485); +#305239 = PRESENTATION_STYLE_ASSIGNMENT((#305240)); +#305240 = SURFACE_STYLE_USAGE(.BOTH.,#305241); +#305241 = SURFACE_SIDE_STYLE('',(#305242)); +#305242 = SURFACE_STYLE_FILL_AREA(#305243); +#305243 = FILL_AREA_STYLE('',(#305244)); +#305244 = FILL_AREA_STYLE_COLOUR('',#280691); +#305245 = STYLED_ITEM('color',(#305246),#55509); +#305246 = PRESENTATION_STYLE_ASSIGNMENT((#305247)); +#305247 = SURFACE_STYLE_USAGE(.BOTH.,#305248); +#305248 = SURFACE_SIDE_STYLE('',(#305249)); +#305249 = SURFACE_STYLE_FILL_AREA(#305250); +#305250 = FILL_AREA_STYLE('',(#305251)); +#305251 = FILL_AREA_STYLE_COLOUR('',#280691); +#305252 = STYLED_ITEM('color',(#305253),#55526); +#305253 = PRESENTATION_STYLE_ASSIGNMENT((#305254)); +#305254 = SURFACE_STYLE_USAGE(.BOTH.,#305255); +#305255 = SURFACE_SIDE_STYLE('',(#305256)); +#305256 = SURFACE_STYLE_FILL_AREA(#305257); +#305257 = FILL_AREA_STYLE('',(#305258)); +#305258 = FILL_AREA_STYLE_COLOUR('',#280691); +#305259 = STYLED_ITEM('color',(#305260),#55557); +#305260 = PRESENTATION_STYLE_ASSIGNMENT((#305261)); +#305261 = SURFACE_STYLE_USAGE(.BOTH.,#305262); +#305262 = SURFACE_SIDE_STYLE('',(#305263)); +#305263 = SURFACE_STYLE_FILL_AREA(#305264); +#305264 = FILL_AREA_STYLE('',(#305265)); +#305265 = FILL_AREA_STYLE_COLOUR('',#280691); +#305266 = STYLED_ITEM('color',(#305267),#55581); +#305267 = PRESENTATION_STYLE_ASSIGNMENT((#305268)); +#305268 = SURFACE_STYLE_USAGE(.BOTH.,#305269); +#305269 = SURFACE_SIDE_STYLE('',(#305270)); +#305270 = SURFACE_STYLE_FILL_AREA(#305271); +#305271 = FILL_AREA_STYLE('',(#305272)); +#305272 = FILL_AREA_STYLE_COLOUR('',#280691); +#305273 = STYLED_ITEM('color',(#305274),#55605); +#305274 = PRESENTATION_STYLE_ASSIGNMENT((#305275)); +#305275 = SURFACE_STYLE_USAGE(.BOTH.,#305276); +#305276 = SURFACE_SIDE_STYLE('',(#305277)); +#305277 = SURFACE_STYLE_FILL_AREA(#305278); +#305278 = FILL_AREA_STYLE('',(#305279)); +#305279 = FILL_AREA_STYLE_COLOUR('',#280691); +#305280 = STYLED_ITEM('color',(#305281),#55622); +#305281 = PRESENTATION_STYLE_ASSIGNMENT((#305282)); +#305282 = SURFACE_STYLE_USAGE(.BOTH.,#305283); +#305283 = SURFACE_SIDE_STYLE('',(#305284)); +#305284 = SURFACE_STYLE_FILL_AREA(#305285); +#305285 = FILL_AREA_STYLE('',(#305286)); +#305286 = FILL_AREA_STYLE_COLOUR('',#280691); +#305287 = STYLED_ITEM('color',(#305288),#55653); +#305288 = PRESENTATION_STYLE_ASSIGNMENT((#305289)); +#305289 = SURFACE_STYLE_USAGE(.BOTH.,#305290); +#305290 = SURFACE_SIDE_STYLE('',(#305291)); +#305291 = SURFACE_STYLE_FILL_AREA(#305292); +#305292 = FILL_AREA_STYLE('',(#305293)); +#305293 = FILL_AREA_STYLE_COLOUR('',#280691); +#305294 = STYLED_ITEM('color',(#305295),#55677); +#305295 = PRESENTATION_STYLE_ASSIGNMENT((#305296)); +#305296 = SURFACE_STYLE_USAGE(.BOTH.,#305297); +#305297 = SURFACE_SIDE_STYLE('',(#305298)); +#305298 = SURFACE_STYLE_FILL_AREA(#305299); +#305299 = FILL_AREA_STYLE('',(#305300)); +#305300 = FILL_AREA_STYLE_COLOUR('',#280691); +#305301 = STYLED_ITEM('color',(#305302),#55701); +#305302 = PRESENTATION_STYLE_ASSIGNMENT((#305303)); +#305303 = SURFACE_STYLE_USAGE(.BOTH.,#305304); +#305304 = SURFACE_SIDE_STYLE('',(#305305)); +#305305 = SURFACE_STYLE_FILL_AREA(#305306); +#305306 = FILL_AREA_STYLE('',(#305307)); +#305307 = FILL_AREA_STYLE_COLOUR('',#280691); +#305308 = STYLED_ITEM('color',(#305309),#55718); +#305309 = PRESENTATION_STYLE_ASSIGNMENT((#305310)); +#305310 = SURFACE_STYLE_USAGE(.BOTH.,#305311); +#305311 = SURFACE_SIDE_STYLE('',(#305312)); +#305312 = SURFACE_STYLE_FILL_AREA(#305313); +#305313 = FILL_AREA_STYLE('',(#305314)); +#305314 = FILL_AREA_STYLE_COLOUR('',#280691); +#305315 = STYLED_ITEM('color',(#305316),#55749); +#305316 = PRESENTATION_STYLE_ASSIGNMENT((#305317)); +#305317 = SURFACE_STYLE_USAGE(.BOTH.,#305318); +#305318 = SURFACE_SIDE_STYLE('',(#305319)); +#305319 = SURFACE_STYLE_FILL_AREA(#305320); +#305320 = FILL_AREA_STYLE('',(#305321)); +#305321 = FILL_AREA_STYLE_COLOUR('',#280691); +#305322 = STYLED_ITEM('color',(#305323),#55773); +#305323 = PRESENTATION_STYLE_ASSIGNMENT((#305324)); +#305324 = SURFACE_STYLE_USAGE(.BOTH.,#305325); +#305325 = SURFACE_SIDE_STYLE('',(#305326)); +#305326 = SURFACE_STYLE_FILL_AREA(#305327); +#305327 = FILL_AREA_STYLE('',(#305328)); +#305328 = FILL_AREA_STYLE_COLOUR('',#280691); +#305329 = STYLED_ITEM('color',(#305330),#55797); +#305330 = PRESENTATION_STYLE_ASSIGNMENT((#305331)); +#305331 = SURFACE_STYLE_USAGE(.BOTH.,#305332); +#305332 = SURFACE_SIDE_STYLE('',(#305333)); +#305333 = SURFACE_STYLE_FILL_AREA(#305334); +#305334 = FILL_AREA_STYLE('',(#305335)); +#305335 = FILL_AREA_STYLE_COLOUR('',#280691); +#305336 = STYLED_ITEM('color',(#305337),#55814); +#305337 = PRESENTATION_STYLE_ASSIGNMENT((#305338)); +#305338 = SURFACE_STYLE_USAGE(.BOTH.,#305339); +#305339 = SURFACE_SIDE_STYLE('',(#305340)); +#305340 = SURFACE_STYLE_FILL_AREA(#305341); +#305341 = FILL_AREA_STYLE('',(#305342)); +#305342 = FILL_AREA_STYLE_COLOUR('',#280691); +#305343 = STYLED_ITEM('color',(#305344),#55845); +#305344 = PRESENTATION_STYLE_ASSIGNMENT((#305345)); +#305345 = SURFACE_STYLE_USAGE(.BOTH.,#305346); +#305346 = SURFACE_SIDE_STYLE('',(#305347)); +#305347 = SURFACE_STYLE_FILL_AREA(#305348); +#305348 = FILL_AREA_STYLE('',(#305349)); +#305349 = FILL_AREA_STYLE_COLOUR('',#280691); +#305350 = STYLED_ITEM('color',(#305351),#55869); +#305351 = PRESENTATION_STYLE_ASSIGNMENT((#305352)); +#305352 = SURFACE_STYLE_USAGE(.BOTH.,#305353); +#305353 = SURFACE_SIDE_STYLE('',(#305354)); +#305354 = SURFACE_STYLE_FILL_AREA(#305355); +#305355 = FILL_AREA_STYLE('',(#305356)); +#305356 = FILL_AREA_STYLE_COLOUR('',#280691); +#305357 = STYLED_ITEM('color',(#305358),#55893); +#305358 = PRESENTATION_STYLE_ASSIGNMENT((#305359)); +#305359 = SURFACE_STYLE_USAGE(.BOTH.,#305360); +#305360 = SURFACE_SIDE_STYLE('',(#305361)); +#305361 = SURFACE_STYLE_FILL_AREA(#305362); +#305362 = FILL_AREA_STYLE('',(#305363)); +#305363 = FILL_AREA_STYLE_COLOUR('',#280691); +#305364 = STYLED_ITEM('color',(#305365),#55910); +#305365 = PRESENTATION_STYLE_ASSIGNMENT((#305366)); +#305366 = SURFACE_STYLE_USAGE(.BOTH.,#305367); +#305367 = SURFACE_SIDE_STYLE('',(#305368)); +#305368 = SURFACE_STYLE_FILL_AREA(#305369); +#305369 = FILL_AREA_STYLE('',(#305370)); +#305370 = FILL_AREA_STYLE_COLOUR('',#280691); +#305371 = STYLED_ITEM('color',(#305372),#55922); +#305372 = PRESENTATION_STYLE_ASSIGNMENT((#305373)); +#305373 = SURFACE_STYLE_USAGE(.BOTH.,#305374); +#305374 = SURFACE_SIDE_STYLE('',(#305375)); +#305375 = SURFACE_STYLE_FILL_AREA(#305376); +#305376 = FILL_AREA_STYLE('',(#305377)); +#305377 = FILL_AREA_STYLE_COLOUR('',#280691); +#305378 = STYLED_ITEM('color',(#305379),#55934); +#305379 = PRESENTATION_STYLE_ASSIGNMENT((#305380)); +#305380 = SURFACE_STYLE_USAGE(.BOTH.,#305381); +#305381 = SURFACE_SIDE_STYLE('',(#305382)); +#305382 = SURFACE_STYLE_FILL_AREA(#305383); +#305383 = FILL_AREA_STYLE('',(#305384)); +#305384 = FILL_AREA_STYLE_COLOUR('',#280691); +#305385 = STYLED_ITEM('color',(#305386),#55946); +#305386 = PRESENTATION_STYLE_ASSIGNMENT((#305387)); +#305387 = SURFACE_STYLE_USAGE(.BOTH.,#305388); +#305388 = SURFACE_SIDE_STYLE('',(#305389)); +#305389 = SURFACE_STYLE_FILL_AREA(#305390); +#305390 = FILL_AREA_STYLE('',(#305391)); +#305391 = FILL_AREA_STYLE_COLOUR('',#280691); +#305392 = STYLED_ITEM('color',(#305393),#55958); +#305393 = PRESENTATION_STYLE_ASSIGNMENT((#305394)); +#305394 = SURFACE_STYLE_USAGE(.BOTH.,#305395); +#305395 = SURFACE_SIDE_STYLE('',(#305396)); +#305396 = SURFACE_STYLE_FILL_AREA(#305397); +#305397 = FILL_AREA_STYLE('',(#305398)); +#305398 = FILL_AREA_STYLE_COLOUR('',#280691); +#305399 = STYLED_ITEM('color',(#305400),#55970); +#305400 = PRESENTATION_STYLE_ASSIGNMENT((#305401)); +#305401 = SURFACE_STYLE_USAGE(.BOTH.,#305402); +#305402 = SURFACE_SIDE_STYLE('',(#305403)); +#305403 = SURFACE_STYLE_FILL_AREA(#305404); +#305404 = FILL_AREA_STYLE('',(#305405)); +#305405 = FILL_AREA_STYLE_COLOUR('',#280691); +#305406 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #305407,#305416,#305425,#305434,#305443,#305452,#305461,#305470, + #305479,#305488,#305497,#305506,#305515,#305524,#305533,#305542, + #305551,#305560,#305569,#305578,#305587,#305596,#305605,#305614, + #305623,#305632,#305641,#305650,#305659,#305668,#305677,#305686, + #305695,#305704,#305713,#305722,#305731,#305740,#305749,#305758, + #305767,#305776,#305785,#305794,#305803,#305812,#305821,#305830, + #305839,#305848,#305857,#305866,#305875,#305884,#305893,#305902, + #305911,#305920,#305929,#305938,#305947,#305956,#305965,#305974, + #305983,#305992,#306001,#306010,#306019,#306028,#306037,#306046, + #306055,#306064,#306073,#306082,#306091,#306100,#306109,#306118, + #306127,#306136,#306145,#306154,#306163,#306172,#306181,#306190, + #306199,#306208,#306217,#306226,#306235,#306244,#306253,#306262, + #306271,#306280,#306289,#306298,#306307,#306316,#306325,#306334, + #306343,#306352,#306361,#306370,#306379,#306388,#306397,#306406, + #306415,#306424,#306433,#306442,#306451,#306460,#306469,#306478, + #306487,#306496,#306505,#306514,#306523,#306532,#306541,#306550, + #306559,#306568,#306577,#306586,#306595,#306604,#306613,#306622, + #306631,#306640,#306649,#306658,#306667,#306676,#306685,#306694, + #306703,#306712,#306721,#306730,#306739,#306748,#306757,#306766, + #306775,#306784,#306793,#306802,#306811,#306820,#306829,#306838, + #306847,#306856,#306865,#306874,#306883,#306892,#306901,#306910, + #306919,#306928,#306937,#306946,#306955,#306964,#306973,#306982, + #306991,#307000,#307009,#307018,#307027,#307036,#307045,#307054, + #307063,#307072,#307081,#307090,#307099,#307108,#307117,#307126, + #307135,#307144,#307153,#307162,#307171,#307180,#307189,#307198, + #307207,#307216,#307225,#307234,#307243,#307252,#307261,#307270, + #307279,#307288,#307297,#307306,#307315,#307324,#307333,#307342, + #307351,#307360,#307369,#307378,#307387,#307396,#307405,#307414, + #307423,#307432,#307441,#307450,#307459,#307468,#307477,#307486, + #307495,#307504,#307513,#307522,#307531,#307540,#307549,#307558, + #307567,#307576,#307585,#307594,#307603,#307612,#307621,#307630, + #307639,#307648,#307657,#307666,#307675,#307684,#307693,#307702, + #307711,#307720,#307729,#307738,#307747,#307756,#307765,#307774, + #307783,#307792,#307801,#307810,#307819,#307828,#307837,#307846, + #307855,#307864,#307873,#307882,#307891,#307900,#307909,#307918, + #307927,#307936,#307945,#307954,#307963,#307972,#307981,#307990, + #307999,#308008,#308017,#308026,#308035,#308044,#308053,#308062, + #308071,#308080,#308089,#308098,#308107,#308116,#308125,#308134, + #308143,#308152,#308161,#308170,#308179,#308188,#308197,#308206, + #308215,#308224,#308233,#308242,#308251,#308260,#308269,#308278, + #308287,#308296,#308305,#308314,#308323,#308332,#308341,#308350, + #308359,#308368,#308377,#308386,#308395,#308404,#308413,#308422, + #308431,#308440,#308449,#308458,#308467,#308476,#308485,#308494, + #308503,#308512,#308521,#308530,#308539,#308548),#51682); +#305407 = STYLED_ITEM('color',(#305408),#43642); +#305408 = PRESENTATION_STYLE_ASSIGNMENT((#305409,#305414)); +#305409 = SURFACE_STYLE_USAGE(.BOTH.,#305410); +#305410 = SURFACE_SIDE_STYLE('',(#305411)); +#305411 = SURFACE_STYLE_FILL_AREA(#305412); +#305412 = FILL_AREA_STYLE('',(#305413)); +#305413 = FILL_AREA_STYLE_COLOUR('',#279624); +#305414 = CURVE_STYLE('',#305415,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305416 = STYLED_ITEM('color',(#305417),#43682); +#305417 = PRESENTATION_STYLE_ASSIGNMENT((#305418,#305423)); +#305418 = SURFACE_STYLE_USAGE(.BOTH.,#305419); +#305419 = SURFACE_SIDE_STYLE('',(#305420)); +#305420 = SURFACE_STYLE_FILL_AREA(#305421); +#305421 = FILL_AREA_STYLE('',(#305422)); +#305422 = FILL_AREA_STYLE_COLOUR('',#279624); +#305423 = CURVE_STYLE('',#305424,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305425 = STYLED_ITEM('color',(#305426),#43745); +#305426 = PRESENTATION_STYLE_ASSIGNMENT((#305427,#305432)); +#305427 = SURFACE_STYLE_USAGE(.BOTH.,#305428); +#305428 = SURFACE_SIDE_STYLE('',(#305429)); +#305429 = SURFACE_STYLE_FILL_AREA(#305430); +#305430 = FILL_AREA_STYLE('',(#305431)); +#305431 = FILL_AREA_STYLE_COLOUR('',#279624); +#305432 = CURVE_STYLE('',#305433,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305434 = STYLED_ITEM('color',(#305435),#43808); +#305435 = PRESENTATION_STYLE_ASSIGNMENT((#305436,#305441)); +#305436 = SURFACE_STYLE_USAGE(.BOTH.,#305437); +#305437 = SURFACE_SIDE_STYLE('',(#305438)); +#305438 = SURFACE_STYLE_FILL_AREA(#305439); +#305439 = FILL_AREA_STYLE('',(#305440)); +#305440 = FILL_AREA_STYLE_COLOUR('',#279624); +#305441 = CURVE_STYLE('',#305442,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305443 = STYLED_ITEM('color',(#305444),#43825); +#305444 = PRESENTATION_STYLE_ASSIGNMENT((#305445,#305450)); +#305445 = SURFACE_STYLE_USAGE(.BOTH.,#305446); +#305446 = SURFACE_SIDE_STYLE('',(#305447)); +#305447 = SURFACE_STYLE_FILL_AREA(#305448); +#305448 = FILL_AREA_STYLE('',(#305449)); +#305449 = FILL_AREA_STYLE_COLOUR('',#279624); +#305450 = CURVE_STYLE('',#305451,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305452 = STYLED_ITEM('color',(#305453),#44182); +#305453 = PRESENTATION_STYLE_ASSIGNMENT((#305454,#305459)); +#305454 = SURFACE_STYLE_USAGE(.BOTH.,#305455); +#305455 = SURFACE_SIDE_STYLE('',(#305456)); +#305456 = SURFACE_STYLE_FILL_AREA(#305457); +#305457 = FILL_AREA_STYLE('',(#305458)); +#305458 = FILL_AREA_STYLE_COLOUR('',#279624); +#305459 = CURVE_STYLE('',#305460,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305461 = STYLED_ITEM('color',(#305462),#44204); +#305462 = PRESENTATION_STYLE_ASSIGNMENT((#305463,#305468)); +#305463 = SURFACE_STYLE_USAGE(.BOTH.,#305464); +#305464 = SURFACE_SIDE_STYLE('',(#305465)); +#305465 = SURFACE_STYLE_FILL_AREA(#305466); +#305466 = FILL_AREA_STYLE('',(#305467)); +#305467 = FILL_AREA_STYLE_COLOUR('',#279624); +#305468 = CURVE_STYLE('',#305469,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305470 = STYLED_ITEM('color',(#305471),#44221); +#305471 = PRESENTATION_STYLE_ASSIGNMENT((#305472,#305477)); +#305472 = SURFACE_STYLE_USAGE(.BOTH.,#305473); +#305473 = SURFACE_SIDE_STYLE('',(#305474)); +#305474 = SURFACE_STYLE_FILL_AREA(#305475); +#305475 = FILL_AREA_STYLE('',(#305476)); +#305476 = FILL_AREA_STYLE_COLOUR('',#279624); +#305477 = CURVE_STYLE('',#305478,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305479 = OVER_RIDING_STYLED_ITEM('overriding color',(#305480),#44254, + #305470); +#305480 = PRESENTATION_STYLE_ASSIGNMENT((#305481,#305486)); +#305481 = SURFACE_STYLE_USAGE(.BOTH.,#305482); +#305482 = SURFACE_SIDE_STYLE('',(#305483)); +#305483 = SURFACE_STYLE_FILL_AREA(#305484); +#305484 = FILL_AREA_STYLE('',(#305485)); +#305485 = FILL_AREA_STYLE_COLOUR('',#280691); +#305486 = CURVE_STYLE('',#305487,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305488 = OVER_RIDING_STYLED_ITEM('overriding color',(#305489),#44286, + #305470); +#305489 = PRESENTATION_STYLE_ASSIGNMENT((#305490,#305495)); +#305490 = SURFACE_STYLE_USAGE(.BOTH.,#305491); +#305491 = SURFACE_SIDE_STYLE('',(#305492)); +#305492 = SURFACE_STYLE_FILL_AREA(#305493); +#305493 = FILL_AREA_STYLE('',(#305494)); +#305494 = FILL_AREA_STYLE_COLOUR('',#280691); +#305495 = CURVE_STYLE('',#305496,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305497 = OVER_RIDING_STYLED_ITEM('overriding color',(#305498),#44320, + #305470); +#305498 = PRESENTATION_STYLE_ASSIGNMENT((#305499,#305504)); +#305499 = SURFACE_STYLE_USAGE(.BOTH.,#305500); +#305500 = SURFACE_SIDE_STYLE('',(#305501)); +#305501 = SURFACE_STYLE_FILL_AREA(#305502); +#305502 = FILL_AREA_STYLE('',(#305503)); +#305503 = FILL_AREA_STYLE_COLOUR('',#280691); +#305504 = CURVE_STYLE('',#305505,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305506 = OVER_RIDING_STYLED_ITEM('overriding color',(#305507),#44352, + #305470); +#305507 = PRESENTATION_STYLE_ASSIGNMENT((#305508,#305513)); +#305508 = SURFACE_STYLE_USAGE(.BOTH.,#305509); +#305509 = SURFACE_SIDE_STYLE('',(#305510)); +#305510 = SURFACE_STYLE_FILL_AREA(#305511); +#305511 = FILL_AREA_STYLE('',(#305512)); +#305512 = FILL_AREA_STYLE_COLOUR('',#280691); +#305513 = CURVE_STYLE('',#305514,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305515 = OVER_RIDING_STYLED_ITEM('overriding color',(#305516),#44386, + #305470); +#305516 = PRESENTATION_STYLE_ASSIGNMENT((#305517,#305522)); +#305517 = SURFACE_STYLE_USAGE(.BOTH.,#305518); +#305518 = SURFACE_SIDE_STYLE('',(#305519)); +#305519 = SURFACE_STYLE_FILL_AREA(#305520); +#305520 = FILL_AREA_STYLE('',(#305521)); +#305521 = FILL_AREA_STYLE_COLOUR('',#280691); +#305522 = CURVE_STYLE('',#305523,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305524 = OVER_RIDING_STYLED_ITEM('overriding color',(#305525),#44418, + #305470); +#305525 = PRESENTATION_STYLE_ASSIGNMENT((#305526,#305531)); +#305526 = SURFACE_STYLE_USAGE(.BOTH.,#305527); +#305527 = SURFACE_SIDE_STYLE('',(#305528)); +#305528 = SURFACE_STYLE_FILL_AREA(#305529); +#305529 = FILL_AREA_STYLE('',(#305530)); +#305530 = FILL_AREA_STYLE_COLOUR('',#280691); +#305531 = CURVE_STYLE('',#305532,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305533 = OVER_RIDING_STYLED_ITEM('overriding color',(#305534),#44452, + #305470); +#305534 = PRESENTATION_STYLE_ASSIGNMENT((#305535,#305540)); +#305535 = SURFACE_STYLE_USAGE(.BOTH.,#305536); +#305536 = SURFACE_SIDE_STYLE('',(#305537)); +#305537 = SURFACE_STYLE_FILL_AREA(#305538); +#305538 = FILL_AREA_STYLE('',(#305539)); +#305539 = FILL_AREA_STYLE_COLOUR('',#280691); +#305540 = CURVE_STYLE('',#305541,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305542 = OVER_RIDING_STYLED_ITEM('overriding color',(#305543),#44484, + #305470); +#305543 = PRESENTATION_STYLE_ASSIGNMENT((#305544,#305549)); +#305544 = SURFACE_STYLE_USAGE(.BOTH.,#305545); +#305545 = SURFACE_SIDE_STYLE('',(#305546)); +#305546 = SURFACE_STYLE_FILL_AREA(#305547); +#305547 = FILL_AREA_STYLE('',(#305548)); +#305548 = FILL_AREA_STYLE_COLOUR('',#280691); +#305549 = CURVE_STYLE('',#305550,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305551 = OVER_RIDING_STYLED_ITEM('overriding color',(#305552),#44518, + #305470); +#305552 = PRESENTATION_STYLE_ASSIGNMENT((#305553,#305558)); +#305553 = SURFACE_STYLE_USAGE(.BOTH.,#305554); +#305554 = SURFACE_SIDE_STYLE('',(#305555)); +#305555 = SURFACE_STYLE_FILL_AREA(#305556); +#305556 = FILL_AREA_STYLE('',(#305557)); +#305557 = FILL_AREA_STYLE_COLOUR('',#280691); +#305558 = CURVE_STYLE('',#305559,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305560 = OVER_RIDING_STYLED_ITEM('overriding color',(#305561),#44550, + #305470); +#305561 = PRESENTATION_STYLE_ASSIGNMENT((#305562,#305567)); +#305562 = SURFACE_STYLE_USAGE(.BOTH.,#305563); +#305563 = SURFACE_SIDE_STYLE('',(#305564)); +#305564 = SURFACE_STYLE_FILL_AREA(#305565); +#305565 = FILL_AREA_STYLE('',(#305566)); +#305566 = FILL_AREA_STYLE_COLOUR('',#280691); +#305567 = CURVE_STYLE('',#305568,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305568 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305569 = OVER_RIDING_STYLED_ITEM('overriding color',(#305570),#44584, + #305470); +#305570 = PRESENTATION_STYLE_ASSIGNMENT((#305571,#305576)); +#305571 = SURFACE_STYLE_USAGE(.BOTH.,#305572); +#305572 = SURFACE_SIDE_STYLE('',(#305573)); +#305573 = SURFACE_STYLE_FILL_AREA(#305574); +#305574 = FILL_AREA_STYLE('',(#305575)); +#305575 = FILL_AREA_STYLE_COLOUR('',#280691); +#305576 = CURVE_STYLE('',#305577,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305578 = OVER_RIDING_STYLED_ITEM('overriding color',(#305579),#44616, + #305470); +#305579 = PRESENTATION_STYLE_ASSIGNMENT((#305580,#305585)); +#305580 = SURFACE_STYLE_USAGE(.BOTH.,#305581); +#305581 = SURFACE_SIDE_STYLE('',(#305582)); +#305582 = SURFACE_STYLE_FILL_AREA(#305583); +#305583 = FILL_AREA_STYLE('',(#305584)); +#305584 = FILL_AREA_STYLE_COLOUR('',#280691); +#305585 = CURVE_STYLE('',#305586,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305587 = OVER_RIDING_STYLED_ITEM('overriding color',(#305588),#44650, + #305470); +#305588 = PRESENTATION_STYLE_ASSIGNMENT((#305589,#305594)); +#305589 = SURFACE_STYLE_USAGE(.BOTH.,#305590); +#305590 = SURFACE_SIDE_STYLE('',(#305591)); +#305591 = SURFACE_STYLE_FILL_AREA(#305592); +#305592 = FILL_AREA_STYLE('',(#305593)); +#305593 = FILL_AREA_STYLE_COLOUR('',#280691); +#305594 = CURVE_STYLE('',#305595,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305596 = OVER_RIDING_STYLED_ITEM('overriding color',(#305597),#44682, + #305470); +#305597 = PRESENTATION_STYLE_ASSIGNMENT((#305598,#305603)); +#305598 = SURFACE_STYLE_USAGE(.BOTH.,#305599); +#305599 = SURFACE_SIDE_STYLE('',(#305600)); +#305600 = SURFACE_STYLE_FILL_AREA(#305601); +#305601 = FILL_AREA_STYLE('',(#305602)); +#305602 = FILL_AREA_STYLE_COLOUR('',#280691); +#305603 = CURVE_STYLE('',#305604,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305605 = OVER_RIDING_STYLED_ITEM('overriding color',(#305606),#44716, + #305470); +#305606 = PRESENTATION_STYLE_ASSIGNMENT((#305607,#305612)); +#305607 = SURFACE_STYLE_USAGE(.BOTH.,#305608); +#305608 = SURFACE_SIDE_STYLE('',(#305609)); +#305609 = SURFACE_STYLE_FILL_AREA(#305610); +#305610 = FILL_AREA_STYLE('',(#305611)); +#305611 = FILL_AREA_STYLE_COLOUR('',#280691); +#305612 = CURVE_STYLE('',#305613,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305613 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305614 = OVER_RIDING_STYLED_ITEM('overriding color',(#305615),#44748, + #305470); +#305615 = PRESENTATION_STYLE_ASSIGNMENT((#305616,#305621)); +#305616 = SURFACE_STYLE_USAGE(.BOTH.,#305617); +#305617 = SURFACE_SIDE_STYLE('',(#305618)); +#305618 = SURFACE_STYLE_FILL_AREA(#305619); +#305619 = FILL_AREA_STYLE('',(#305620)); +#305620 = FILL_AREA_STYLE_COLOUR('',#280691); +#305621 = CURVE_STYLE('',#305622,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305622 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305623 = OVER_RIDING_STYLED_ITEM('overriding color',(#305624),#44782, + #305470); +#305624 = PRESENTATION_STYLE_ASSIGNMENT((#305625,#305630)); +#305625 = SURFACE_STYLE_USAGE(.BOTH.,#305626); +#305626 = SURFACE_SIDE_STYLE('',(#305627)); +#305627 = SURFACE_STYLE_FILL_AREA(#305628); +#305628 = FILL_AREA_STYLE('',(#305629)); +#305629 = FILL_AREA_STYLE_COLOUR('',#280691); +#305630 = CURVE_STYLE('',#305631,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305631 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305632 = OVER_RIDING_STYLED_ITEM('overriding color',(#305633),#44814, + #305470); +#305633 = PRESENTATION_STYLE_ASSIGNMENT((#305634,#305639)); +#305634 = SURFACE_STYLE_USAGE(.BOTH.,#305635); +#305635 = SURFACE_SIDE_STYLE('',(#305636)); +#305636 = SURFACE_STYLE_FILL_AREA(#305637); +#305637 = FILL_AREA_STYLE('',(#305638)); +#305638 = FILL_AREA_STYLE_COLOUR('',#280691); +#305639 = CURVE_STYLE('',#305640,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305641 = OVER_RIDING_STYLED_ITEM('overriding color',(#305642),#44848, + #305470); +#305642 = PRESENTATION_STYLE_ASSIGNMENT((#305643,#305648)); +#305643 = SURFACE_STYLE_USAGE(.BOTH.,#305644); +#305644 = SURFACE_SIDE_STYLE('',(#305645)); +#305645 = SURFACE_STYLE_FILL_AREA(#305646); +#305646 = FILL_AREA_STYLE('',(#305647)); +#305647 = FILL_AREA_STYLE_COLOUR('',#280691); +#305648 = CURVE_STYLE('',#305649,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305649 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305650 = OVER_RIDING_STYLED_ITEM('overriding color',(#305651),#44880, + #305470); +#305651 = PRESENTATION_STYLE_ASSIGNMENT((#305652,#305657)); +#305652 = SURFACE_STYLE_USAGE(.BOTH.,#305653); +#305653 = SURFACE_SIDE_STYLE('',(#305654)); +#305654 = SURFACE_STYLE_FILL_AREA(#305655); +#305655 = FILL_AREA_STYLE('',(#305656)); +#305656 = FILL_AREA_STYLE_COLOUR('',#280691); +#305657 = CURVE_STYLE('',#305658,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#305658 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305659 = STYLED_ITEM('color',(#305660),#44898); +#305660 = PRESENTATION_STYLE_ASSIGNMENT((#305661,#305666)); +#305661 = SURFACE_STYLE_USAGE(.BOTH.,#305662); +#305662 = SURFACE_SIDE_STYLE('',(#305663)); +#305663 = SURFACE_STYLE_FILL_AREA(#305664); +#305664 = FILL_AREA_STYLE('',(#305665)); +#305665 = FILL_AREA_STYLE_COLOUR('',#279624); +#305666 = CURVE_STYLE('',#305667,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305667 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305668 = STYLED_ITEM('color',(#305669),#44910); +#305669 = PRESENTATION_STYLE_ASSIGNMENT((#305670,#305675)); +#305670 = SURFACE_STYLE_USAGE(.BOTH.,#305671); +#305671 = SURFACE_SIDE_STYLE('',(#305672)); +#305672 = SURFACE_STYLE_FILL_AREA(#305673); +#305673 = FILL_AREA_STYLE('',(#305674)); +#305674 = FILL_AREA_STYLE_COLOUR('',#279624); +#305675 = CURVE_STYLE('',#305676,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305676 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305677 = STYLED_ITEM('color',(#305678),#44922); +#305678 = PRESENTATION_STYLE_ASSIGNMENT((#305679,#305684)); +#305679 = SURFACE_STYLE_USAGE(.BOTH.,#305680); +#305680 = SURFACE_SIDE_STYLE('',(#305681)); +#305681 = SURFACE_STYLE_FILL_AREA(#305682); +#305682 = FILL_AREA_STYLE('',(#305683)); +#305683 = FILL_AREA_STYLE_COLOUR('',#279624); +#305684 = CURVE_STYLE('',#305685,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305685 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305686 = STYLED_ITEM('color',(#305687),#44953); +#305687 = PRESENTATION_STYLE_ASSIGNMENT((#305688,#305693)); +#305688 = SURFACE_STYLE_USAGE(.BOTH.,#305689); +#305689 = SURFACE_SIDE_STYLE('',(#305690)); +#305690 = SURFACE_STYLE_FILL_AREA(#305691); +#305691 = FILL_AREA_STYLE('',(#305692)); +#305692 = FILL_AREA_STYLE_COLOUR('',#279624); +#305693 = CURVE_STYLE('',#305694,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305694 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305695 = STYLED_ITEM('color',(#305696),#44977); +#305696 = PRESENTATION_STYLE_ASSIGNMENT((#305697,#305702)); +#305697 = SURFACE_STYLE_USAGE(.BOTH.,#305698); +#305698 = SURFACE_SIDE_STYLE('',(#305699)); +#305699 = SURFACE_STYLE_FILL_AREA(#305700); +#305700 = FILL_AREA_STYLE('',(#305701)); +#305701 = FILL_AREA_STYLE_COLOUR('',#279624); +#305702 = CURVE_STYLE('',#305703,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305703 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305704 = STYLED_ITEM('color',(#305705),#45001); +#305705 = PRESENTATION_STYLE_ASSIGNMENT((#305706,#305711)); +#305706 = SURFACE_STYLE_USAGE(.BOTH.,#305707); +#305707 = SURFACE_SIDE_STYLE('',(#305708)); +#305708 = SURFACE_STYLE_FILL_AREA(#305709); +#305709 = FILL_AREA_STYLE('',(#305710)); +#305710 = FILL_AREA_STYLE_COLOUR('',#279624); +#305711 = CURVE_STYLE('',#305712,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305712 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305713 = STYLED_ITEM('color',(#305714),#45018); +#305714 = PRESENTATION_STYLE_ASSIGNMENT((#305715,#305720)); +#305715 = SURFACE_STYLE_USAGE(.BOTH.,#305716); +#305716 = SURFACE_SIDE_STYLE('',(#305717)); +#305717 = SURFACE_STYLE_FILL_AREA(#305718); +#305718 = FILL_AREA_STYLE('',(#305719)); +#305719 = FILL_AREA_STYLE_COLOUR('',#279624); +#305720 = CURVE_STYLE('',#305721,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305721 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305722 = STYLED_ITEM('color',(#305723),#45049); +#305723 = PRESENTATION_STYLE_ASSIGNMENT((#305724,#305729)); +#305724 = SURFACE_STYLE_USAGE(.BOTH.,#305725); +#305725 = SURFACE_SIDE_STYLE('',(#305726)); +#305726 = SURFACE_STYLE_FILL_AREA(#305727); +#305727 = FILL_AREA_STYLE('',(#305728)); +#305728 = FILL_AREA_STYLE_COLOUR('',#279624); +#305729 = CURVE_STYLE('',#305730,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305730 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305731 = STYLED_ITEM('color',(#305732),#45073); +#305732 = PRESENTATION_STYLE_ASSIGNMENT((#305733,#305738)); +#305733 = SURFACE_STYLE_USAGE(.BOTH.,#305734); +#305734 = SURFACE_SIDE_STYLE('',(#305735)); +#305735 = SURFACE_STYLE_FILL_AREA(#305736); +#305736 = FILL_AREA_STYLE('',(#305737)); +#305737 = FILL_AREA_STYLE_COLOUR('',#279624); +#305738 = CURVE_STYLE('',#305739,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305739 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305740 = STYLED_ITEM('color',(#305741),#45097); +#305741 = PRESENTATION_STYLE_ASSIGNMENT((#305742,#305747)); +#305742 = SURFACE_STYLE_USAGE(.BOTH.,#305743); +#305743 = SURFACE_SIDE_STYLE('',(#305744)); +#305744 = SURFACE_STYLE_FILL_AREA(#305745); +#305745 = FILL_AREA_STYLE('',(#305746)); +#305746 = FILL_AREA_STYLE_COLOUR('',#279624); +#305747 = CURVE_STYLE('',#305748,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305748 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305749 = STYLED_ITEM('color',(#305750),#45114); +#305750 = PRESENTATION_STYLE_ASSIGNMENT((#305751,#305756)); +#305751 = SURFACE_STYLE_USAGE(.BOTH.,#305752); +#305752 = SURFACE_SIDE_STYLE('',(#305753)); +#305753 = SURFACE_STYLE_FILL_AREA(#305754); +#305754 = FILL_AREA_STYLE('',(#305755)); +#305755 = FILL_AREA_STYLE_COLOUR('',#279624); +#305756 = CURVE_STYLE('',#305757,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305757 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305758 = STYLED_ITEM('color',(#305759),#45145); +#305759 = PRESENTATION_STYLE_ASSIGNMENT((#305760,#305765)); +#305760 = SURFACE_STYLE_USAGE(.BOTH.,#305761); +#305761 = SURFACE_SIDE_STYLE('',(#305762)); +#305762 = SURFACE_STYLE_FILL_AREA(#305763); +#305763 = FILL_AREA_STYLE('',(#305764)); +#305764 = FILL_AREA_STYLE_COLOUR('',#279624); +#305765 = CURVE_STYLE('',#305766,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305766 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305767 = STYLED_ITEM('color',(#305768),#45169); +#305768 = PRESENTATION_STYLE_ASSIGNMENT((#305769,#305774)); +#305769 = SURFACE_STYLE_USAGE(.BOTH.,#305770); +#305770 = SURFACE_SIDE_STYLE('',(#305771)); +#305771 = SURFACE_STYLE_FILL_AREA(#305772); +#305772 = FILL_AREA_STYLE('',(#305773)); +#305773 = FILL_AREA_STYLE_COLOUR('',#279624); +#305774 = CURVE_STYLE('',#305775,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305775 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305776 = STYLED_ITEM('color',(#305777),#45193); +#305777 = PRESENTATION_STYLE_ASSIGNMENT((#305778,#305783)); +#305778 = SURFACE_STYLE_USAGE(.BOTH.,#305779); +#305779 = SURFACE_SIDE_STYLE('',(#305780)); +#305780 = SURFACE_STYLE_FILL_AREA(#305781); +#305781 = FILL_AREA_STYLE('',(#305782)); +#305782 = FILL_AREA_STYLE_COLOUR('',#279624); +#305783 = CURVE_STYLE('',#305784,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305784 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305785 = STYLED_ITEM('color',(#305786),#45210); +#305786 = PRESENTATION_STYLE_ASSIGNMENT((#305787,#305792)); +#305787 = SURFACE_STYLE_USAGE(.BOTH.,#305788); +#305788 = SURFACE_SIDE_STYLE('',(#305789)); +#305789 = SURFACE_STYLE_FILL_AREA(#305790); +#305790 = FILL_AREA_STYLE('',(#305791)); +#305791 = FILL_AREA_STYLE_COLOUR('',#279624); +#305792 = CURVE_STYLE('',#305793,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305793 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305794 = STYLED_ITEM('color',(#305795),#45241); +#305795 = PRESENTATION_STYLE_ASSIGNMENT((#305796,#305801)); +#305796 = SURFACE_STYLE_USAGE(.BOTH.,#305797); +#305797 = SURFACE_SIDE_STYLE('',(#305798)); +#305798 = SURFACE_STYLE_FILL_AREA(#305799); +#305799 = FILL_AREA_STYLE('',(#305800)); +#305800 = FILL_AREA_STYLE_COLOUR('',#279624); +#305801 = CURVE_STYLE('',#305802,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305802 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305803 = STYLED_ITEM('color',(#305804),#45265); +#305804 = PRESENTATION_STYLE_ASSIGNMENT((#305805,#305810)); +#305805 = SURFACE_STYLE_USAGE(.BOTH.,#305806); +#305806 = SURFACE_SIDE_STYLE('',(#305807)); +#305807 = SURFACE_STYLE_FILL_AREA(#305808); +#305808 = FILL_AREA_STYLE('',(#305809)); +#305809 = FILL_AREA_STYLE_COLOUR('',#279624); +#305810 = CURVE_STYLE('',#305811,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305811 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305812 = STYLED_ITEM('color',(#305813),#45289); +#305813 = PRESENTATION_STYLE_ASSIGNMENT((#305814,#305819)); +#305814 = SURFACE_STYLE_USAGE(.BOTH.,#305815); +#305815 = SURFACE_SIDE_STYLE('',(#305816)); +#305816 = SURFACE_STYLE_FILL_AREA(#305817); +#305817 = FILL_AREA_STYLE('',(#305818)); +#305818 = FILL_AREA_STYLE_COLOUR('',#279624); +#305819 = CURVE_STYLE('',#305820,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305820 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305821 = STYLED_ITEM('color',(#305822),#45306); +#305822 = PRESENTATION_STYLE_ASSIGNMENT((#305823,#305828)); +#305823 = SURFACE_STYLE_USAGE(.BOTH.,#305824); +#305824 = SURFACE_SIDE_STYLE('',(#305825)); +#305825 = SURFACE_STYLE_FILL_AREA(#305826); +#305826 = FILL_AREA_STYLE('',(#305827)); +#305827 = FILL_AREA_STYLE_COLOUR('',#279624); +#305828 = CURVE_STYLE('',#305829,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305829 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305830 = STYLED_ITEM('color',(#305831),#45337); +#305831 = PRESENTATION_STYLE_ASSIGNMENT((#305832,#305837)); +#305832 = SURFACE_STYLE_USAGE(.BOTH.,#305833); +#305833 = SURFACE_SIDE_STYLE('',(#305834)); +#305834 = SURFACE_STYLE_FILL_AREA(#305835); +#305835 = FILL_AREA_STYLE('',(#305836)); +#305836 = FILL_AREA_STYLE_COLOUR('',#279624); +#305837 = CURVE_STYLE('',#305838,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305838 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305839 = STYLED_ITEM('color',(#305840),#45361); +#305840 = PRESENTATION_STYLE_ASSIGNMENT((#305841,#305846)); +#305841 = SURFACE_STYLE_USAGE(.BOTH.,#305842); +#305842 = SURFACE_SIDE_STYLE('',(#305843)); +#305843 = SURFACE_STYLE_FILL_AREA(#305844); +#305844 = FILL_AREA_STYLE('',(#305845)); +#305845 = FILL_AREA_STYLE_COLOUR('',#279624); +#305846 = CURVE_STYLE('',#305847,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305847 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305848 = STYLED_ITEM('color',(#305849),#45385); +#305849 = PRESENTATION_STYLE_ASSIGNMENT((#305850,#305855)); +#305850 = SURFACE_STYLE_USAGE(.BOTH.,#305851); +#305851 = SURFACE_SIDE_STYLE('',(#305852)); +#305852 = SURFACE_STYLE_FILL_AREA(#305853); +#305853 = FILL_AREA_STYLE('',(#305854)); +#305854 = FILL_AREA_STYLE_COLOUR('',#279624); +#305855 = CURVE_STYLE('',#305856,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305856 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305857 = STYLED_ITEM('color',(#305858),#45402); +#305858 = PRESENTATION_STYLE_ASSIGNMENT((#305859,#305864)); +#305859 = SURFACE_STYLE_USAGE(.BOTH.,#305860); +#305860 = SURFACE_SIDE_STYLE('',(#305861)); +#305861 = SURFACE_STYLE_FILL_AREA(#305862); +#305862 = FILL_AREA_STYLE('',(#305863)); +#305863 = FILL_AREA_STYLE_COLOUR('',#279624); +#305864 = CURVE_STYLE('',#305865,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305865 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305866 = STYLED_ITEM('color',(#305867),#45433); +#305867 = PRESENTATION_STYLE_ASSIGNMENT((#305868,#305873)); +#305868 = SURFACE_STYLE_USAGE(.BOTH.,#305869); +#305869 = SURFACE_SIDE_STYLE('',(#305870)); +#305870 = SURFACE_STYLE_FILL_AREA(#305871); +#305871 = FILL_AREA_STYLE('',(#305872)); +#305872 = FILL_AREA_STYLE_COLOUR('',#279624); +#305873 = CURVE_STYLE('',#305874,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305874 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305875 = STYLED_ITEM('color',(#305876),#45457); +#305876 = PRESENTATION_STYLE_ASSIGNMENT((#305877,#305882)); +#305877 = SURFACE_STYLE_USAGE(.BOTH.,#305878); +#305878 = SURFACE_SIDE_STYLE('',(#305879)); +#305879 = SURFACE_STYLE_FILL_AREA(#305880); +#305880 = FILL_AREA_STYLE('',(#305881)); +#305881 = FILL_AREA_STYLE_COLOUR('',#279624); +#305882 = CURVE_STYLE('',#305883,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305883 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305884 = STYLED_ITEM('color',(#305885),#45481); +#305885 = PRESENTATION_STYLE_ASSIGNMENT((#305886,#305891)); +#305886 = SURFACE_STYLE_USAGE(.BOTH.,#305887); +#305887 = SURFACE_SIDE_STYLE('',(#305888)); +#305888 = SURFACE_STYLE_FILL_AREA(#305889); +#305889 = FILL_AREA_STYLE('',(#305890)); +#305890 = FILL_AREA_STYLE_COLOUR('',#279624); +#305891 = CURVE_STYLE('',#305892,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305892 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305893 = STYLED_ITEM('color',(#305894),#45498); +#305894 = PRESENTATION_STYLE_ASSIGNMENT((#305895,#305900)); +#305895 = SURFACE_STYLE_USAGE(.BOTH.,#305896); +#305896 = SURFACE_SIDE_STYLE('',(#305897)); +#305897 = SURFACE_STYLE_FILL_AREA(#305898); +#305898 = FILL_AREA_STYLE('',(#305899)); +#305899 = FILL_AREA_STYLE_COLOUR('',#279624); +#305900 = CURVE_STYLE('',#305901,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305901 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305902 = STYLED_ITEM('color',(#305903),#45529); +#305903 = PRESENTATION_STYLE_ASSIGNMENT((#305904,#305909)); +#305904 = SURFACE_STYLE_USAGE(.BOTH.,#305905); +#305905 = SURFACE_SIDE_STYLE('',(#305906)); +#305906 = SURFACE_STYLE_FILL_AREA(#305907); +#305907 = FILL_AREA_STYLE('',(#305908)); +#305908 = FILL_AREA_STYLE_COLOUR('',#279624); +#305909 = CURVE_STYLE('',#305910,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305910 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305911 = STYLED_ITEM('color',(#305912),#45553); +#305912 = PRESENTATION_STYLE_ASSIGNMENT((#305913,#305918)); +#305913 = SURFACE_STYLE_USAGE(.BOTH.,#305914); +#305914 = SURFACE_SIDE_STYLE('',(#305915)); +#305915 = SURFACE_STYLE_FILL_AREA(#305916); +#305916 = FILL_AREA_STYLE('',(#305917)); +#305917 = FILL_AREA_STYLE_COLOUR('',#279624); +#305918 = CURVE_STYLE('',#305919,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305919 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305920 = STYLED_ITEM('color',(#305921),#45577); +#305921 = PRESENTATION_STYLE_ASSIGNMENT((#305922,#305927)); +#305922 = SURFACE_STYLE_USAGE(.BOTH.,#305923); +#305923 = SURFACE_SIDE_STYLE('',(#305924)); +#305924 = SURFACE_STYLE_FILL_AREA(#305925); +#305925 = FILL_AREA_STYLE('',(#305926)); +#305926 = FILL_AREA_STYLE_COLOUR('',#279624); +#305927 = CURVE_STYLE('',#305928,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305928 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305929 = STYLED_ITEM('color',(#305930),#45594); +#305930 = PRESENTATION_STYLE_ASSIGNMENT((#305931,#305936)); +#305931 = SURFACE_STYLE_USAGE(.BOTH.,#305932); +#305932 = SURFACE_SIDE_STYLE('',(#305933)); +#305933 = SURFACE_STYLE_FILL_AREA(#305934); +#305934 = FILL_AREA_STYLE('',(#305935)); +#305935 = FILL_AREA_STYLE_COLOUR('',#279624); +#305936 = CURVE_STYLE('',#305937,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305937 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305938 = STYLED_ITEM('color',(#305939),#45625); +#305939 = PRESENTATION_STYLE_ASSIGNMENT((#305940,#305945)); +#305940 = SURFACE_STYLE_USAGE(.BOTH.,#305941); +#305941 = SURFACE_SIDE_STYLE('',(#305942)); +#305942 = SURFACE_STYLE_FILL_AREA(#305943); +#305943 = FILL_AREA_STYLE('',(#305944)); +#305944 = FILL_AREA_STYLE_COLOUR('',#279624); +#305945 = CURVE_STYLE('',#305946,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305946 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305947 = STYLED_ITEM('color',(#305948),#45649); +#305948 = PRESENTATION_STYLE_ASSIGNMENT((#305949,#305954)); +#305949 = SURFACE_STYLE_USAGE(.BOTH.,#305950); +#305950 = SURFACE_SIDE_STYLE('',(#305951)); +#305951 = SURFACE_STYLE_FILL_AREA(#305952); +#305952 = FILL_AREA_STYLE('',(#305953)); +#305953 = FILL_AREA_STYLE_COLOUR('',#279624); +#305954 = CURVE_STYLE('',#305955,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305955 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305956 = STYLED_ITEM('color',(#305957),#45673); +#305957 = PRESENTATION_STYLE_ASSIGNMENT((#305958,#305963)); +#305958 = SURFACE_STYLE_USAGE(.BOTH.,#305959); +#305959 = SURFACE_SIDE_STYLE('',(#305960)); +#305960 = SURFACE_STYLE_FILL_AREA(#305961); +#305961 = FILL_AREA_STYLE('',(#305962)); +#305962 = FILL_AREA_STYLE_COLOUR('',#279624); +#305963 = CURVE_STYLE('',#305964,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305964 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305965 = STYLED_ITEM('color',(#305966),#45690); +#305966 = PRESENTATION_STYLE_ASSIGNMENT((#305967,#305972)); +#305967 = SURFACE_STYLE_USAGE(.BOTH.,#305968); +#305968 = SURFACE_SIDE_STYLE('',(#305969)); +#305969 = SURFACE_STYLE_FILL_AREA(#305970); +#305970 = FILL_AREA_STYLE('',(#305971)); +#305971 = FILL_AREA_STYLE_COLOUR('',#279624); +#305972 = CURVE_STYLE('',#305973,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305973 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305974 = STYLED_ITEM('color',(#305975),#45721); +#305975 = PRESENTATION_STYLE_ASSIGNMENT((#305976,#305981)); +#305976 = SURFACE_STYLE_USAGE(.BOTH.,#305977); +#305977 = SURFACE_SIDE_STYLE('',(#305978)); +#305978 = SURFACE_STYLE_FILL_AREA(#305979); +#305979 = FILL_AREA_STYLE('',(#305980)); +#305980 = FILL_AREA_STYLE_COLOUR('',#279624); +#305981 = CURVE_STYLE('',#305982,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305982 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305983 = STYLED_ITEM('color',(#305984),#45745); +#305984 = PRESENTATION_STYLE_ASSIGNMENT((#305985,#305990)); +#305985 = SURFACE_STYLE_USAGE(.BOTH.,#305986); +#305986 = SURFACE_SIDE_STYLE('',(#305987)); +#305987 = SURFACE_STYLE_FILL_AREA(#305988); +#305988 = FILL_AREA_STYLE('',(#305989)); +#305989 = FILL_AREA_STYLE_COLOUR('',#279624); +#305990 = CURVE_STYLE('',#305991,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#305991 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305992 = STYLED_ITEM('color',(#305993),#45769); +#305993 = PRESENTATION_STYLE_ASSIGNMENT((#305994,#305999)); +#305994 = SURFACE_STYLE_USAGE(.BOTH.,#305995); +#305995 = SURFACE_SIDE_STYLE('',(#305996)); +#305996 = SURFACE_STYLE_FILL_AREA(#305997); +#305997 = FILL_AREA_STYLE('',(#305998)); +#305998 = FILL_AREA_STYLE_COLOUR('',#279624); +#305999 = CURVE_STYLE('',#306000,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306000 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306001 = STYLED_ITEM('color',(#306002),#45786); +#306002 = PRESENTATION_STYLE_ASSIGNMENT((#306003,#306008)); +#306003 = SURFACE_STYLE_USAGE(.BOTH.,#306004); +#306004 = SURFACE_SIDE_STYLE('',(#306005)); +#306005 = SURFACE_STYLE_FILL_AREA(#306006); +#306006 = FILL_AREA_STYLE('',(#306007)); +#306007 = FILL_AREA_STYLE_COLOUR('',#279624); +#306008 = CURVE_STYLE('',#306009,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306009 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306010 = STYLED_ITEM('color',(#306011),#45817); +#306011 = PRESENTATION_STYLE_ASSIGNMENT((#306012,#306017)); +#306012 = SURFACE_STYLE_USAGE(.BOTH.,#306013); +#306013 = SURFACE_SIDE_STYLE('',(#306014)); +#306014 = SURFACE_STYLE_FILL_AREA(#306015); +#306015 = FILL_AREA_STYLE('',(#306016)); +#306016 = FILL_AREA_STYLE_COLOUR('',#279624); +#306017 = CURVE_STYLE('',#306018,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306018 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306019 = STYLED_ITEM('color',(#306020),#45841); +#306020 = PRESENTATION_STYLE_ASSIGNMENT((#306021,#306026)); +#306021 = SURFACE_STYLE_USAGE(.BOTH.,#306022); +#306022 = SURFACE_SIDE_STYLE('',(#306023)); +#306023 = SURFACE_STYLE_FILL_AREA(#306024); +#306024 = FILL_AREA_STYLE('',(#306025)); +#306025 = FILL_AREA_STYLE_COLOUR('',#279624); +#306026 = CURVE_STYLE('',#306027,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306027 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306028 = STYLED_ITEM('color',(#306029),#45865); +#306029 = PRESENTATION_STYLE_ASSIGNMENT((#306030,#306035)); +#306030 = SURFACE_STYLE_USAGE(.BOTH.,#306031); +#306031 = SURFACE_SIDE_STYLE('',(#306032)); +#306032 = SURFACE_STYLE_FILL_AREA(#306033); +#306033 = FILL_AREA_STYLE('',(#306034)); +#306034 = FILL_AREA_STYLE_COLOUR('',#279624); +#306035 = CURVE_STYLE('',#306036,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306036 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306037 = STYLED_ITEM('color',(#306038),#45882); +#306038 = PRESENTATION_STYLE_ASSIGNMENT((#306039,#306044)); +#306039 = SURFACE_STYLE_USAGE(.BOTH.,#306040); +#306040 = SURFACE_SIDE_STYLE('',(#306041)); +#306041 = SURFACE_STYLE_FILL_AREA(#306042); +#306042 = FILL_AREA_STYLE('',(#306043)); +#306043 = FILL_AREA_STYLE_COLOUR('',#280691); +#306044 = CURVE_STYLE('',#306045,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306045 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306046 = STYLED_ITEM('color',(#306047),#45899); +#306047 = PRESENTATION_STYLE_ASSIGNMENT((#306048,#306053)); +#306048 = SURFACE_STYLE_USAGE(.BOTH.,#306049); +#306049 = SURFACE_SIDE_STYLE('',(#306050)); +#306050 = SURFACE_STYLE_FILL_AREA(#306051); +#306051 = FILL_AREA_STYLE('',(#306052)); +#306052 = FILL_AREA_STYLE_COLOUR('',#280691); +#306053 = CURVE_STYLE('',#306054,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306054 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306055 = STYLED_ITEM('color',(#306056),#45946); +#306056 = PRESENTATION_STYLE_ASSIGNMENT((#306057,#306062)); +#306057 = SURFACE_STYLE_USAGE(.BOTH.,#306058); +#306058 = SURFACE_SIDE_STYLE('',(#306059)); +#306059 = SURFACE_STYLE_FILL_AREA(#306060); +#306060 = FILL_AREA_STYLE('',(#306061)); +#306061 = FILL_AREA_STYLE_COLOUR('',#280691); +#306062 = CURVE_STYLE('',#306063,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306063 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306064 = STYLED_ITEM('color',(#306065),#45963); +#306065 = PRESENTATION_STYLE_ASSIGNMENT((#306066,#306071)); +#306066 = SURFACE_STYLE_USAGE(.BOTH.,#306067); +#306067 = SURFACE_SIDE_STYLE('',(#306068)); +#306068 = SURFACE_STYLE_FILL_AREA(#306069); +#306069 = FILL_AREA_STYLE('',(#306070)); +#306070 = FILL_AREA_STYLE_COLOUR('',#280691); +#306071 = CURVE_STYLE('',#306072,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306072 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306073 = STYLED_ITEM('color',(#306074),#46010); +#306074 = PRESENTATION_STYLE_ASSIGNMENT((#306075,#306080)); +#306075 = SURFACE_STYLE_USAGE(.BOTH.,#306076); +#306076 = SURFACE_SIDE_STYLE('',(#306077)); +#306077 = SURFACE_STYLE_FILL_AREA(#306078); +#306078 = FILL_AREA_STYLE('',(#306079)); +#306079 = FILL_AREA_STYLE_COLOUR('',#280691); +#306080 = CURVE_STYLE('',#306081,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306081 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306082 = STYLED_ITEM('color',(#306083),#46027); +#306083 = PRESENTATION_STYLE_ASSIGNMENT((#306084,#306089)); +#306084 = SURFACE_STYLE_USAGE(.BOTH.,#306085); +#306085 = SURFACE_SIDE_STYLE('',(#306086)); +#306086 = SURFACE_STYLE_FILL_AREA(#306087); +#306087 = FILL_AREA_STYLE('',(#306088)); +#306088 = FILL_AREA_STYLE_COLOUR('',#280691); +#306089 = CURVE_STYLE('',#306090,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306090 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306091 = STYLED_ITEM('color',(#306092),#46074); +#306092 = PRESENTATION_STYLE_ASSIGNMENT((#306093,#306098)); +#306093 = SURFACE_STYLE_USAGE(.BOTH.,#306094); +#306094 = SURFACE_SIDE_STYLE('',(#306095)); +#306095 = SURFACE_STYLE_FILL_AREA(#306096); +#306096 = FILL_AREA_STYLE('',(#306097)); +#306097 = FILL_AREA_STYLE_COLOUR('',#280691); +#306098 = CURVE_STYLE('',#306099,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306099 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306100 = STYLED_ITEM('color',(#306101),#46091); +#306101 = PRESENTATION_STYLE_ASSIGNMENT((#306102,#306107)); +#306102 = SURFACE_STYLE_USAGE(.BOTH.,#306103); +#306103 = SURFACE_SIDE_STYLE('',(#306104)); +#306104 = SURFACE_STYLE_FILL_AREA(#306105); +#306105 = FILL_AREA_STYLE('',(#306106)); +#306106 = FILL_AREA_STYLE_COLOUR('',#280691); +#306107 = CURVE_STYLE('',#306108,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306108 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306109 = STYLED_ITEM('color',(#306110),#46138); +#306110 = PRESENTATION_STYLE_ASSIGNMENT((#306111,#306116)); +#306111 = SURFACE_STYLE_USAGE(.BOTH.,#306112); +#306112 = SURFACE_SIDE_STYLE('',(#306113)); +#306113 = SURFACE_STYLE_FILL_AREA(#306114); +#306114 = FILL_AREA_STYLE('',(#306115)); +#306115 = FILL_AREA_STYLE_COLOUR('',#280691); +#306116 = CURVE_STYLE('',#306117,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306117 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306118 = STYLED_ITEM('color',(#306119),#46155); +#306119 = PRESENTATION_STYLE_ASSIGNMENT((#306120,#306125)); +#306120 = SURFACE_STYLE_USAGE(.BOTH.,#306121); +#306121 = SURFACE_SIDE_STYLE('',(#306122)); +#306122 = SURFACE_STYLE_FILL_AREA(#306123); +#306123 = FILL_AREA_STYLE('',(#306124)); +#306124 = FILL_AREA_STYLE_COLOUR('',#280691); +#306125 = CURVE_STYLE('',#306126,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306126 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306127 = STYLED_ITEM('color',(#306128),#46202); +#306128 = PRESENTATION_STYLE_ASSIGNMENT((#306129,#306134)); +#306129 = SURFACE_STYLE_USAGE(.BOTH.,#306130); +#306130 = SURFACE_SIDE_STYLE('',(#306131)); +#306131 = SURFACE_STYLE_FILL_AREA(#306132); +#306132 = FILL_AREA_STYLE('',(#306133)); +#306133 = FILL_AREA_STYLE_COLOUR('',#280691); +#306134 = CURVE_STYLE('',#306135,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306135 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306136 = STYLED_ITEM('color',(#306137),#46219); +#306137 = PRESENTATION_STYLE_ASSIGNMENT((#306138,#306143)); +#306138 = SURFACE_STYLE_USAGE(.BOTH.,#306139); +#306139 = SURFACE_SIDE_STYLE('',(#306140)); +#306140 = SURFACE_STYLE_FILL_AREA(#306141); +#306141 = FILL_AREA_STYLE('',(#306142)); +#306142 = FILL_AREA_STYLE_COLOUR('',#280691); +#306143 = CURVE_STYLE('',#306144,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306144 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306145 = STYLED_ITEM('color',(#306146),#46266); +#306146 = PRESENTATION_STYLE_ASSIGNMENT((#306147,#306152)); +#306147 = SURFACE_STYLE_USAGE(.BOTH.,#306148); +#306148 = SURFACE_SIDE_STYLE('',(#306149)); +#306149 = SURFACE_STYLE_FILL_AREA(#306150); +#306150 = FILL_AREA_STYLE('',(#306151)); +#306151 = FILL_AREA_STYLE_COLOUR('',#280691); +#306152 = CURVE_STYLE('',#306153,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306153 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306154 = STYLED_ITEM('color',(#306155),#46283); +#306155 = PRESENTATION_STYLE_ASSIGNMENT((#306156,#306161)); +#306156 = SURFACE_STYLE_USAGE(.BOTH.,#306157); +#306157 = SURFACE_SIDE_STYLE('',(#306158)); +#306158 = SURFACE_STYLE_FILL_AREA(#306159); +#306159 = FILL_AREA_STYLE('',(#306160)); +#306160 = FILL_AREA_STYLE_COLOUR('',#280691); +#306161 = CURVE_STYLE('',#306162,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306162 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306163 = STYLED_ITEM('color',(#306164),#46330); +#306164 = PRESENTATION_STYLE_ASSIGNMENT((#306165,#306170)); +#306165 = SURFACE_STYLE_USAGE(.BOTH.,#306166); +#306166 = SURFACE_SIDE_STYLE('',(#306167)); +#306167 = SURFACE_STYLE_FILL_AREA(#306168); +#306168 = FILL_AREA_STYLE('',(#306169)); +#306169 = FILL_AREA_STYLE_COLOUR('',#280691); +#306170 = CURVE_STYLE('',#306171,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306171 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306172 = STYLED_ITEM('color',(#306173),#46347); +#306173 = PRESENTATION_STYLE_ASSIGNMENT((#306174,#306179)); +#306174 = SURFACE_STYLE_USAGE(.BOTH.,#306175); +#306175 = SURFACE_SIDE_STYLE('',(#306176)); +#306176 = SURFACE_STYLE_FILL_AREA(#306177); +#306177 = FILL_AREA_STYLE('',(#306178)); +#306178 = FILL_AREA_STYLE_COLOUR('',#280691); +#306179 = CURVE_STYLE('',#306180,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306180 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306181 = STYLED_ITEM('color',(#306182),#46394); +#306182 = PRESENTATION_STYLE_ASSIGNMENT((#306183,#306188)); +#306183 = SURFACE_STYLE_USAGE(.BOTH.,#306184); +#306184 = SURFACE_SIDE_STYLE('',(#306185)); +#306185 = SURFACE_STYLE_FILL_AREA(#306186); +#306186 = FILL_AREA_STYLE('',(#306187)); +#306187 = FILL_AREA_STYLE_COLOUR('',#280691); +#306188 = CURVE_STYLE('',#306189,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306189 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306190 = STYLED_ITEM('color',(#306191),#46411); +#306191 = PRESENTATION_STYLE_ASSIGNMENT((#306192,#306197)); +#306192 = SURFACE_STYLE_USAGE(.BOTH.,#306193); +#306193 = SURFACE_SIDE_STYLE('',(#306194)); +#306194 = SURFACE_STYLE_FILL_AREA(#306195); +#306195 = FILL_AREA_STYLE('',(#306196)); +#306196 = FILL_AREA_STYLE_COLOUR('',#280691); +#306197 = CURVE_STYLE('',#306198,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306198 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306199 = STYLED_ITEM('color',(#306200),#46458); +#306200 = PRESENTATION_STYLE_ASSIGNMENT((#306201,#306206)); +#306201 = SURFACE_STYLE_USAGE(.BOTH.,#306202); +#306202 = SURFACE_SIDE_STYLE('',(#306203)); +#306203 = SURFACE_STYLE_FILL_AREA(#306204); +#306204 = FILL_AREA_STYLE('',(#306205)); +#306205 = FILL_AREA_STYLE_COLOUR('',#280691); +#306206 = CURVE_STYLE('',#306207,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306207 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306208 = STYLED_ITEM('color',(#306209),#46475); +#306209 = PRESENTATION_STYLE_ASSIGNMENT((#306210,#306215)); +#306210 = SURFACE_STYLE_USAGE(.BOTH.,#306211); +#306211 = SURFACE_SIDE_STYLE('',(#306212)); +#306212 = SURFACE_STYLE_FILL_AREA(#306213); +#306213 = FILL_AREA_STYLE('',(#306214)); +#306214 = FILL_AREA_STYLE_COLOUR('',#280691); +#306215 = CURVE_STYLE('',#306216,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306216 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306217 = STYLED_ITEM('color',(#306218),#46522); +#306218 = PRESENTATION_STYLE_ASSIGNMENT((#306219,#306224)); +#306219 = SURFACE_STYLE_USAGE(.BOTH.,#306220); +#306220 = SURFACE_SIDE_STYLE('',(#306221)); +#306221 = SURFACE_STYLE_FILL_AREA(#306222); +#306222 = FILL_AREA_STYLE('',(#306223)); +#306223 = FILL_AREA_STYLE_COLOUR('',#280691); +#306224 = CURVE_STYLE('',#306225,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306225 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306226 = STYLED_ITEM('color',(#306227),#46539); +#306227 = PRESENTATION_STYLE_ASSIGNMENT((#306228,#306233)); +#306228 = SURFACE_STYLE_USAGE(.BOTH.,#306229); +#306229 = SURFACE_SIDE_STYLE('',(#306230)); +#306230 = SURFACE_STYLE_FILL_AREA(#306231); +#306231 = FILL_AREA_STYLE('',(#306232)); +#306232 = FILL_AREA_STYLE_COLOUR('',#280691); +#306233 = CURVE_STYLE('',#306234,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306234 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306235 = STYLED_ITEM('color',(#306236),#46586); +#306236 = PRESENTATION_STYLE_ASSIGNMENT((#306237,#306242)); +#306237 = SURFACE_STYLE_USAGE(.BOTH.,#306238); +#306238 = SURFACE_SIDE_STYLE('',(#306239)); +#306239 = SURFACE_STYLE_FILL_AREA(#306240); +#306240 = FILL_AREA_STYLE('',(#306241)); +#306241 = FILL_AREA_STYLE_COLOUR('',#280691); +#306242 = CURVE_STYLE('',#306243,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306243 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306244 = STYLED_ITEM('color',(#306245),#46603); +#306245 = PRESENTATION_STYLE_ASSIGNMENT((#306246,#306251)); +#306246 = SURFACE_STYLE_USAGE(.BOTH.,#306247); +#306247 = SURFACE_SIDE_STYLE('',(#306248)); +#306248 = SURFACE_STYLE_FILL_AREA(#306249); +#306249 = FILL_AREA_STYLE('',(#306250)); +#306250 = FILL_AREA_STYLE_COLOUR('',#280691); +#306251 = CURVE_STYLE('',#306252,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306252 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306253 = STYLED_ITEM('color',(#306254),#46650); +#306254 = PRESENTATION_STYLE_ASSIGNMENT((#306255,#306260)); +#306255 = SURFACE_STYLE_USAGE(.BOTH.,#306256); +#306256 = SURFACE_SIDE_STYLE('',(#306257)); +#306257 = SURFACE_STYLE_FILL_AREA(#306258); +#306258 = FILL_AREA_STYLE('',(#306259)); +#306259 = FILL_AREA_STYLE_COLOUR('',#280691); +#306260 = CURVE_STYLE('',#306261,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306261 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306262 = STYLED_ITEM('color',(#306263),#46667); +#306263 = PRESENTATION_STYLE_ASSIGNMENT((#306264,#306269)); +#306264 = SURFACE_STYLE_USAGE(.BOTH.,#306265); +#306265 = SURFACE_SIDE_STYLE('',(#306266)); +#306266 = SURFACE_STYLE_FILL_AREA(#306267); +#306267 = FILL_AREA_STYLE('',(#306268)); +#306268 = FILL_AREA_STYLE_COLOUR('',#280691); +#306269 = CURVE_STYLE('',#306270,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306270 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306271 = STYLED_ITEM('color',(#306272),#46714); +#306272 = PRESENTATION_STYLE_ASSIGNMENT((#306273,#306278)); +#306273 = SURFACE_STYLE_USAGE(.BOTH.,#306274); +#306274 = SURFACE_SIDE_STYLE('',(#306275)); +#306275 = SURFACE_STYLE_FILL_AREA(#306276); +#306276 = FILL_AREA_STYLE('',(#306277)); +#306277 = FILL_AREA_STYLE_COLOUR('',#280691); +#306278 = CURVE_STYLE('',#306279,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306279 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306280 = STYLED_ITEM('color',(#306281),#46731); +#306281 = PRESENTATION_STYLE_ASSIGNMENT((#306282,#306287)); +#306282 = SURFACE_STYLE_USAGE(.BOTH.,#306283); +#306283 = SURFACE_SIDE_STYLE('',(#306284)); +#306284 = SURFACE_STYLE_FILL_AREA(#306285); +#306285 = FILL_AREA_STYLE('',(#306286)); +#306286 = FILL_AREA_STYLE_COLOUR('',#280691); +#306287 = CURVE_STYLE('',#306288,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306288 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306289 = STYLED_ITEM('color',(#306290),#46778); +#306290 = PRESENTATION_STYLE_ASSIGNMENT((#306291,#306296)); +#306291 = SURFACE_STYLE_USAGE(.BOTH.,#306292); +#306292 = SURFACE_SIDE_STYLE('',(#306293)); +#306293 = SURFACE_STYLE_FILL_AREA(#306294); +#306294 = FILL_AREA_STYLE('',(#306295)); +#306295 = FILL_AREA_STYLE_COLOUR('',#280691); +#306296 = CURVE_STYLE('',#306297,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306297 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306298 = STYLED_ITEM('color',(#306299),#46795); +#306299 = PRESENTATION_STYLE_ASSIGNMENT((#306300,#306305)); +#306300 = SURFACE_STYLE_USAGE(.BOTH.,#306301); +#306301 = SURFACE_SIDE_STYLE('',(#306302)); +#306302 = SURFACE_STYLE_FILL_AREA(#306303); +#306303 = FILL_AREA_STYLE('',(#306304)); +#306304 = FILL_AREA_STYLE_COLOUR('',#280691); +#306305 = CURVE_STYLE('',#306306,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306306 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306307 = STYLED_ITEM('color',(#306308),#46842); +#306308 = PRESENTATION_STYLE_ASSIGNMENT((#306309,#306314)); +#306309 = SURFACE_STYLE_USAGE(.BOTH.,#306310); +#306310 = SURFACE_SIDE_STYLE('',(#306311)); +#306311 = SURFACE_STYLE_FILL_AREA(#306312); +#306312 = FILL_AREA_STYLE('',(#306313)); +#306313 = FILL_AREA_STYLE_COLOUR('',#280691); +#306314 = CURVE_STYLE('',#306315,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306315 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306316 = STYLED_ITEM('color',(#306317),#46859); +#306317 = PRESENTATION_STYLE_ASSIGNMENT((#306318,#306323)); +#306318 = SURFACE_STYLE_USAGE(.BOTH.,#306319); +#306319 = SURFACE_SIDE_STYLE('',(#306320)); +#306320 = SURFACE_STYLE_FILL_AREA(#306321); +#306321 = FILL_AREA_STYLE('',(#306322)); +#306322 = FILL_AREA_STYLE_COLOUR('',#280691); +#306323 = CURVE_STYLE('',#306324,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306324 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306325 = STYLED_ITEM('color',(#306326),#46906); +#306326 = PRESENTATION_STYLE_ASSIGNMENT((#306327,#306332)); +#306327 = SURFACE_STYLE_USAGE(.BOTH.,#306328); +#306328 = SURFACE_SIDE_STYLE('',(#306329)); +#306329 = SURFACE_STYLE_FILL_AREA(#306330); +#306330 = FILL_AREA_STYLE('',(#306331)); +#306331 = FILL_AREA_STYLE_COLOUR('',#280691); +#306332 = CURVE_STYLE('',#306333,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306333 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306334 = STYLED_ITEM('color',(#306335),#46923); +#306335 = PRESENTATION_STYLE_ASSIGNMENT((#306336,#306341)); +#306336 = SURFACE_STYLE_USAGE(.BOTH.,#306337); +#306337 = SURFACE_SIDE_STYLE('',(#306338)); +#306338 = SURFACE_STYLE_FILL_AREA(#306339); +#306339 = FILL_AREA_STYLE('',(#306340)); +#306340 = FILL_AREA_STYLE_COLOUR('',#280691); +#306341 = CURVE_STYLE('',#306342,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306342 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306343 = STYLED_ITEM('color',(#306344),#46970); +#306344 = PRESENTATION_STYLE_ASSIGNMENT((#306345,#306350)); +#306345 = SURFACE_STYLE_USAGE(.BOTH.,#306346); +#306346 = SURFACE_SIDE_STYLE('',(#306347)); +#306347 = SURFACE_STYLE_FILL_AREA(#306348); +#306348 = FILL_AREA_STYLE('',(#306349)); +#306349 = FILL_AREA_STYLE_COLOUR('',#280691); +#306350 = CURVE_STYLE('',#306351,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306351 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306352 = STYLED_ITEM('color',(#306353),#46987); +#306353 = PRESENTATION_STYLE_ASSIGNMENT((#306354,#306359)); +#306354 = SURFACE_STYLE_USAGE(.BOTH.,#306355); +#306355 = SURFACE_SIDE_STYLE('',(#306356)); +#306356 = SURFACE_STYLE_FILL_AREA(#306357); +#306357 = FILL_AREA_STYLE('',(#306358)); +#306358 = FILL_AREA_STYLE_COLOUR('',#280691); +#306359 = CURVE_STYLE('',#306360,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306360 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306361 = STYLED_ITEM('color',(#306362),#47034); +#306362 = PRESENTATION_STYLE_ASSIGNMENT((#306363,#306368)); +#306363 = SURFACE_STYLE_USAGE(.BOTH.,#306364); +#306364 = SURFACE_SIDE_STYLE('',(#306365)); +#306365 = SURFACE_STYLE_FILL_AREA(#306366); +#306366 = FILL_AREA_STYLE('',(#306367)); +#306367 = FILL_AREA_STYLE_COLOUR('',#280691); +#306368 = CURVE_STYLE('',#306369,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306369 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306370 = STYLED_ITEM('color',(#306371),#47051); +#306371 = PRESENTATION_STYLE_ASSIGNMENT((#306372,#306377)); +#306372 = SURFACE_STYLE_USAGE(.BOTH.,#306373); +#306373 = SURFACE_SIDE_STYLE('',(#306374)); +#306374 = SURFACE_STYLE_FILL_AREA(#306375); +#306375 = FILL_AREA_STYLE('',(#306376)); +#306376 = FILL_AREA_STYLE_COLOUR('',#280691); +#306377 = CURVE_STYLE('',#306378,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306378 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306379 = STYLED_ITEM('color',(#306380),#47098); +#306380 = PRESENTATION_STYLE_ASSIGNMENT((#306381,#306386)); +#306381 = SURFACE_STYLE_USAGE(.BOTH.,#306382); +#306382 = SURFACE_SIDE_STYLE('',(#306383)); +#306383 = SURFACE_STYLE_FILL_AREA(#306384); +#306384 = FILL_AREA_STYLE('',(#306385)); +#306385 = FILL_AREA_STYLE_COLOUR('',#280691); +#306386 = CURVE_STYLE('',#306387,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306387 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306388 = STYLED_ITEM('color',(#306389),#47115); +#306389 = PRESENTATION_STYLE_ASSIGNMENT((#306390,#306395)); +#306390 = SURFACE_STYLE_USAGE(.BOTH.,#306391); +#306391 = SURFACE_SIDE_STYLE('',(#306392)); +#306392 = SURFACE_STYLE_FILL_AREA(#306393); +#306393 = FILL_AREA_STYLE('',(#306394)); +#306394 = FILL_AREA_STYLE_COLOUR('',#280691); +#306395 = CURVE_STYLE('',#306396,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306396 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306397 = STYLED_ITEM('color',(#306398),#47162); +#306398 = PRESENTATION_STYLE_ASSIGNMENT((#306399,#306404)); +#306399 = SURFACE_STYLE_USAGE(.BOTH.,#306400); +#306400 = SURFACE_SIDE_STYLE('',(#306401)); +#306401 = SURFACE_STYLE_FILL_AREA(#306402); +#306402 = FILL_AREA_STYLE('',(#306403)); +#306403 = FILL_AREA_STYLE_COLOUR('',#279624); +#306404 = CURVE_STYLE('',#306405,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306405 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306406 = STYLED_ITEM('color',(#306407),#47193); +#306407 = PRESENTATION_STYLE_ASSIGNMENT((#306408,#306413)); +#306408 = SURFACE_STYLE_USAGE(.BOTH.,#306409); +#306409 = SURFACE_SIDE_STYLE('',(#306410)); +#306410 = SURFACE_STYLE_FILL_AREA(#306411); +#306411 = FILL_AREA_STYLE('',(#306412)); +#306412 = FILL_AREA_STYLE_COLOUR('',#279624); +#306413 = CURVE_STYLE('',#306414,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306414 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306415 = OVER_RIDING_STYLED_ITEM('overriding color',(#306416),#47207, + #306406); +#306416 = PRESENTATION_STYLE_ASSIGNMENT((#306417,#306422)); +#306417 = SURFACE_STYLE_USAGE(.BOTH.,#306418); +#306418 = SURFACE_SIDE_STYLE('',(#306419)); +#306419 = SURFACE_STYLE_FILL_AREA(#306420); +#306420 = FILL_AREA_STYLE('',(#306421)); +#306421 = FILL_AREA_STYLE_COLOUR('',#280691); +#306422 = CURVE_STYLE('',#306423,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306423 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306424 = OVER_RIDING_STYLED_ITEM('overriding color',(#306425),#47223, + #306406); +#306425 = PRESENTATION_STYLE_ASSIGNMENT((#306426,#306431)); +#306426 = SURFACE_STYLE_USAGE(.BOTH.,#306427); +#306427 = SURFACE_SIDE_STYLE('',(#306428)); +#306428 = SURFACE_STYLE_FILL_AREA(#306429); +#306429 = FILL_AREA_STYLE('',(#306430)); +#306430 = FILL_AREA_STYLE_COLOUR('',#280691); +#306431 = CURVE_STYLE('',#306432,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306432 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306433 = STYLED_ITEM('color',(#306434),#47249); +#306434 = PRESENTATION_STYLE_ASSIGNMENT((#306435,#306440)); +#306435 = SURFACE_STYLE_USAGE(.BOTH.,#306436); +#306436 = SURFACE_SIDE_STYLE('',(#306437)); +#306437 = SURFACE_STYLE_FILL_AREA(#306438); +#306438 = FILL_AREA_STYLE('',(#306439)); +#306439 = FILL_AREA_STYLE_COLOUR('',#279624); +#306440 = CURVE_STYLE('',#306441,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306441 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306442 = STYLED_ITEM('color',(#306443),#47273); +#306443 = PRESENTATION_STYLE_ASSIGNMENT((#306444,#306449)); +#306444 = SURFACE_STYLE_USAGE(.BOTH.,#306445); +#306445 = SURFACE_SIDE_STYLE('',(#306446)); +#306446 = SURFACE_STYLE_FILL_AREA(#306447); +#306447 = FILL_AREA_STYLE('',(#306448)); +#306448 = FILL_AREA_STYLE_COLOUR('',#279624); +#306449 = CURVE_STYLE('',#306450,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306450 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306451 = OVER_RIDING_STYLED_ITEM('overriding color',(#306452),#47287, + #306442); +#306452 = PRESENTATION_STYLE_ASSIGNMENT((#306453,#306458)); +#306453 = SURFACE_STYLE_USAGE(.BOTH.,#306454); +#306454 = SURFACE_SIDE_STYLE('',(#306455)); +#306455 = SURFACE_STYLE_FILL_AREA(#306456); +#306456 = FILL_AREA_STYLE('',(#306457)); +#306457 = FILL_AREA_STYLE_COLOUR('',#280691); +#306458 = CURVE_STYLE('',#306459,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306459 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306460 = OVER_RIDING_STYLED_ITEM('overriding color',(#306461),#47303, + #306442); +#306461 = PRESENTATION_STYLE_ASSIGNMENT((#306462,#306467)); +#306462 = SURFACE_STYLE_USAGE(.BOTH.,#306463); +#306463 = SURFACE_SIDE_STYLE('',(#306464)); +#306464 = SURFACE_STYLE_FILL_AREA(#306465); +#306465 = FILL_AREA_STYLE('',(#306466)); +#306466 = FILL_AREA_STYLE_COLOUR('',#280691); +#306467 = CURVE_STYLE('',#306468,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306468 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306469 = STYLED_ITEM('color',(#306470),#47322); +#306470 = PRESENTATION_STYLE_ASSIGNMENT((#306471,#306476)); +#306471 = SURFACE_STYLE_USAGE(.BOTH.,#306472); +#306472 = SURFACE_SIDE_STYLE('',(#306473)); +#306473 = SURFACE_STYLE_FILL_AREA(#306474); +#306474 = FILL_AREA_STYLE('',(#306475)); +#306475 = FILL_AREA_STYLE_COLOUR('',#279624); +#306476 = CURVE_STYLE('',#306477,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306477 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306478 = STYLED_ITEM('color',(#306479),#47353); +#306479 = PRESENTATION_STYLE_ASSIGNMENT((#306480,#306485)); +#306480 = SURFACE_STYLE_USAGE(.BOTH.,#306481); +#306481 = SURFACE_SIDE_STYLE('',(#306482)); +#306482 = SURFACE_STYLE_FILL_AREA(#306483); +#306483 = FILL_AREA_STYLE('',(#306484)); +#306484 = FILL_AREA_STYLE_COLOUR('',#279624); +#306485 = CURVE_STYLE('',#306486,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306486 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306487 = OVER_RIDING_STYLED_ITEM('overriding color',(#306488),#47367, + #306478); +#306488 = PRESENTATION_STYLE_ASSIGNMENT((#306489,#306494)); +#306489 = SURFACE_STYLE_USAGE(.BOTH.,#306490); +#306490 = SURFACE_SIDE_STYLE('',(#306491)); +#306491 = SURFACE_STYLE_FILL_AREA(#306492); +#306492 = FILL_AREA_STYLE('',(#306493)); +#306493 = FILL_AREA_STYLE_COLOUR('',#280691); +#306494 = CURVE_STYLE('',#306495,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306495 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306496 = OVER_RIDING_STYLED_ITEM('overriding color',(#306497),#47383, + #306478); +#306497 = PRESENTATION_STYLE_ASSIGNMENT((#306498,#306503)); +#306498 = SURFACE_STYLE_USAGE(.BOTH.,#306499); +#306499 = SURFACE_SIDE_STYLE('',(#306500)); +#306500 = SURFACE_STYLE_FILL_AREA(#306501); +#306501 = FILL_AREA_STYLE('',(#306502)); +#306502 = FILL_AREA_STYLE_COLOUR('',#280691); +#306503 = CURVE_STYLE('',#306504,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306504 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306505 = STYLED_ITEM('color',(#306506),#47409); +#306506 = PRESENTATION_STYLE_ASSIGNMENT((#306507,#306512)); +#306507 = SURFACE_STYLE_USAGE(.BOTH.,#306508); +#306508 = SURFACE_SIDE_STYLE('',(#306509)); +#306509 = SURFACE_STYLE_FILL_AREA(#306510); +#306510 = FILL_AREA_STYLE('',(#306511)); +#306511 = FILL_AREA_STYLE_COLOUR('',#279624); +#306512 = CURVE_STYLE('',#306513,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306513 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306514 = STYLED_ITEM('color',(#306515),#47433); +#306515 = PRESENTATION_STYLE_ASSIGNMENT((#306516,#306521)); +#306516 = SURFACE_STYLE_USAGE(.BOTH.,#306517); +#306517 = SURFACE_SIDE_STYLE('',(#306518)); +#306518 = SURFACE_STYLE_FILL_AREA(#306519); +#306519 = FILL_AREA_STYLE('',(#306520)); +#306520 = FILL_AREA_STYLE_COLOUR('',#279624); +#306521 = CURVE_STYLE('',#306522,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306522 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306523 = OVER_RIDING_STYLED_ITEM('overriding color',(#306524),#47447, + #306514); +#306524 = PRESENTATION_STYLE_ASSIGNMENT((#306525,#306530)); +#306525 = SURFACE_STYLE_USAGE(.BOTH.,#306526); +#306526 = SURFACE_SIDE_STYLE('',(#306527)); +#306527 = SURFACE_STYLE_FILL_AREA(#306528); +#306528 = FILL_AREA_STYLE('',(#306529)); +#306529 = FILL_AREA_STYLE_COLOUR('',#280691); +#306530 = CURVE_STYLE('',#306531,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306531 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306532 = OVER_RIDING_STYLED_ITEM('overriding color',(#306533),#47463, + #306514); +#306533 = PRESENTATION_STYLE_ASSIGNMENT((#306534,#306539)); +#306534 = SURFACE_STYLE_USAGE(.BOTH.,#306535); +#306535 = SURFACE_SIDE_STYLE('',(#306536)); +#306536 = SURFACE_STYLE_FILL_AREA(#306537); +#306537 = FILL_AREA_STYLE('',(#306538)); +#306538 = FILL_AREA_STYLE_COLOUR('',#280691); +#306539 = CURVE_STYLE('',#306540,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306540 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306541 = STYLED_ITEM('color',(#306542),#47482); +#306542 = PRESENTATION_STYLE_ASSIGNMENT((#306543,#306548)); +#306543 = SURFACE_STYLE_USAGE(.BOTH.,#306544); +#306544 = SURFACE_SIDE_STYLE('',(#306545)); +#306545 = SURFACE_STYLE_FILL_AREA(#306546); +#306546 = FILL_AREA_STYLE('',(#306547)); +#306547 = FILL_AREA_STYLE_COLOUR('',#279624); +#306548 = CURVE_STYLE('',#306549,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306549 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306550 = STYLED_ITEM('color',(#306551),#47513); +#306551 = PRESENTATION_STYLE_ASSIGNMENT((#306552,#306557)); +#306552 = SURFACE_STYLE_USAGE(.BOTH.,#306553); +#306553 = SURFACE_SIDE_STYLE('',(#306554)); +#306554 = SURFACE_STYLE_FILL_AREA(#306555); +#306555 = FILL_AREA_STYLE('',(#306556)); +#306556 = FILL_AREA_STYLE_COLOUR('',#279624); +#306557 = CURVE_STYLE('',#306558,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306558 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306559 = OVER_RIDING_STYLED_ITEM('overriding color',(#306560),#47527, + #306550); +#306560 = PRESENTATION_STYLE_ASSIGNMENT((#306561,#306566)); +#306561 = SURFACE_STYLE_USAGE(.BOTH.,#306562); +#306562 = SURFACE_SIDE_STYLE('',(#306563)); +#306563 = SURFACE_STYLE_FILL_AREA(#306564); +#306564 = FILL_AREA_STYLE('',(#306565)); +#306565 = FILL_AREA_STYLE_COLOUR('',#280691); +#306566 = CURVE_STYLE('',#306567,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306567 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306568 = OVER_RIDING_STYLED_ITEM('overriding color',(#306569),#47543, + #306550); +#306569 = PRESENTATION_STYLE_ASSIGNMENT((#306570,#306575)); +#306570 = SURFACE_STYLE_USAGE(.BOTH.,#306571); +#306571 = SURFACE_SIDE_STYLE('',(#306572)); +#306572 = SURFACE_STYLE_FILL_AREA(#306573); +#306573 = FILL_AREA_STYLE('',(#306574)); +#306574 = FILL_AREA_STYLE_COLOUR('',#280691); +#306575 = CURVE_STYLE('',#306576,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306576 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306577 = STYLED_ITEM('color',(#306578),#47569); +#306578 = PRESENTATION_STYLE_ASSIGNMENT((#306579,#306584)); +#306579 = SURFACE_STYLE_USAGE(.BOTH.,#306580); +#306580 = SURFACE_SIDE_STYLE('',(#306581)); +#306581 = SURFACE_STYLE_FILL_AREA(#306582); +#306582 = FILL_AREA_STYLE('',(#306583)); +#306583 = FILL_AREA_STYLE_COLOUR('',#279624); +#306584 = CURVE_STYLE('',#306585,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306585 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306586 = STYLED_ITEM('color',(#306587),#47593); +#306587 = PRESENTATION_STYLE_ASSIGNMENT((#306588,#306593)); +#306588 = SURFACE_STYLE_USAGE(.BOTH.,#306589); +#306589 = SURFACE_SIDE_STYLE('',(#306590)); +#306590 = SURFACE_STYLE_FILL_AREA(#306591); +#306591 = FILL_AREA_STYLE('',(#306592)); +#306592 = FILL_AREA_STYLE_COLOUR('',#279624); +#306593 = CURVE_STYLE('',#306594,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306594 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306595 = OVER_RIDING_STYLED_ITEM('overriding color',(#306596),#47607, + #306586); +#306596 = PRESENTATION_STYLE_ASSIGNMENT((#306597,#306602)); +#306597 = SURFACE_STYLE_USAGE(.BOTH.,#306598); +#306598 = SURFACE_SIDE_STYLE('',(#306599)); +#306599 = SURFACE_STYLE_FILL_AREA(#306600); +#306600 = FILL_AREA_STYLE('',(#306601)); +#306601 = FILL_AREA_STYLE_COLOUR('',#280691); +#306602 = CURVE_STYLE('',#306603,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306603 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306604 = OVER_RIDING_STYLED_ITEM('overriding color',(#306605),#47623, + #306586); +#306605 = PRESENTATION_STYLE_ASSIGNMENT((#306606,#306611)); +#306606 = SURFACE_STYLE_USAGE(.BOTH.,#306607); +#306607 = SURFACE_SIDE_STYLE('',(#306608)); +#306608 = SURFACE_STYLE_FILL_AREA(#306609); +#306609 = FILL_AREA_STYLE('',(#306610)); +#306610 = FILL_AREA_STYLE_COLOUR('',#280691); +#306611 = CURVE_STYLE('',#306612,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306612 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306613 = STYLED_ITEM('color',(#306614),#47642); +#306614 = PRESENTATION_STYLE_ASSIGNMENT((#306615,#306620)); +#306615 = SURFACE_STYLE_USAGE(.BOTH.,#306616); +#306616 = SURFACE_SIDE_STYLE('',(#306617)); +#306617 = SURFACE_STYLE_FILL_AREA(#306618); +#306618 = FILL_AREA_STYLE('',(#306619)); +#306619 = FILL_AREA_STYLE_COLOUR('',#279624); +#306620 = CURVE_STYLE('',#306621,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306621 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306622 = STYLED_ITEM('color',(#306623),#47673); +#306623 = PRESENTATION_STYLE_ASSIGNMENT((#306624,#306629)); +#306624 = SURFACE_STYLE_USAGE(.BOTH.,#306625); +#306625 = SURFACE_SIDE_STYLE('',(#306626)); +#306626 = SURFACE_STYLE_FILL_AREA(#306627); +#306627 = FILL_AREA_STYLE('',(#306628)); +#306628 = FILL_AREA_STYLE_COLOUR('',#279624); +#306629 = CURVE_STYLE('',#306630,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306630 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306631 = OVER_RIDING_STYLED_ITEM('overriding color',(#306632),#47687, + #306622); +#306632 = PRESENTATION_STYLE_ASSIGNMENT((#306633,#306638)); +#306633 = SURFACE_STYLE_USAGE(.BOTH.,#306634); +#306634 = SURFACE_SIDE_STYLE('',(#306635)); +#306635 = SURFACE_STYLE_FILL_AREA(#306636); +#306636 = FILL_AREA_STYLE('',(#306637)); +#306637 = FILL_AREA_STYLE_COLOUR('',#280691); +#306638 = CURVE_STYLE('',#306639,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306639 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306640 = OVER_RIDING_STYLED_ITEM('overriding color',(#306641),#47703, + #306622); +#306641 = PRESENTATION_STYLE_ASSIGNMENT((#306642,#306647)); +#306642 = SURFACE_STYLE_USAGE(.BOTH.,#306643); +#306643 = SURFACE_SIDE_STYLE('',(#306644)); +#306644 = SURFACE_STYLE_FILL_AREA(#306645); +#306645 = FILL_AREA_STYLE('',(#306646)); +#306646 = FILL_AREA_STYLE_COLOUR('',#280691); +#306647 = CURVE_STYLE('',#306648,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306648 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306649 = STYLED_ITEM('color',(#306650),#47729); +#306650 = PRESENTATION_STYLE_ASSIGNMENT((#306651,#306656)); +#306651 = SURFACE_STYLE_USAGE(.BOTH.,#306652); +#306652 = SURFACE_SIDE_STYLE('',(#306653)); +#306653 = SURFACE_STYLE_FILL_AREA(#306654); +#306654 = FILL_AREA_STYLE('',(#306655)); +#306655 = FILL_AREA_STYLE_COLOUR('',#279624); +#306656 = CURVE_STYLE('',#306657,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306657 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306658 = STYLED_ITEM('color',(#306659),#47753); +#306659 = PRESENTATION_STYLE_ASSIGNMENT((#306660,#306665)); +#306660 = SURFACE_STYLE_USAGE(.BOTH.,#306661); +#306661 = SURFACE_SIDE_STYLE('',(#306662)); +#306662 = SURFACE_STYLE_FILL_AREA(#306663); +#306663 = FILL_AREA_STYLE('',(#306664)); +#306664 = FILL_AREA_STYLE_COLOUR('',#279624); +#306665 = CURVE_STYLE('',#306666,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306666 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306667 = OVER_RIDING_STYLED_ITEM('overriding color',(#306668),#47767, + #306658); +#306668 = PRESENTATION_STYLE_ASSIGNMENT((#306669,#306674)); +#306669 = SURFACE_STYLE_USAGE(.BOTH.,#306670); +#306670 = SURFACE_SIDE_STYLE('',(#306671)); +#306671 = SURFACE_STYLE_FILL_AREA(#306672); +#306672 = FILL_AREA_STYLE('',(#306673)); +#306673 = FILL_AREA_STYLE_COLOUR('',#280691); +#306674 = CURVE_STYLE('',#306675,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306675 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306676 = OVER_RIDING_STYLED_ITEM('overriding color',(#306677),#47783, + #306658); +#306677 = PRESENTATION_STYLE_ASSIGNMENT((#306678,#306683)); +#306678 = SURFACE_STYLE_USAGE(.BOTH.,#306679); +#306679 = SURFACE_SIDE_STYLE('',(#306680)); +#306680 = SURFACE_STYLE_FILL_AREA(#306681); +#306681 = FILL_AREA_STYLE('',(#306682)); +#306682 = FILL_AREA_STYLE_COLOUR('',#280691); +#306683 = CURVE_STYLE('',#306684,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306684 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306685 = STYLED_ITEM('color',(#306686),#47802); +#306686 = PRESENTATION_STYLE_ASSIGNMENT((#306687,#306692)); +#306687 = SURFACE_STYLE_USAGE(.BOTH.,#306688); +#306688 = SURFACE_SIDE_STYLE('',(#306689)); +#306689 = SURFACE_STYLE_FILL_AREA(#306690); +#306690 = FILL_AREA_STYLE('',(#306691)); +#306691 = FILL_AREA_STYLE_COLOUR('',#279624); +#306692 = CURVE_STYLE('',#306693,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306693 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306694 = STYLED_ITEM('color',(#306695),#47833); +#306695 = PRESENTATION_STYLE_ASSIGNMENT((#306696,#306701)); +#306696 = SURFACE_STYLE_USAGE(.BOTH.,#306697); +#306697 = SURFACE_SIDE_STYLE('',(#306698)); +#306698 = SURFACE_STYLE_FILL_AREA(#306699); +#306699 = FILL_AREA_STYLE('',(#306700)); +#306700 = FILL_AREA_STYLE_COLOUR('',#279624); +#306701 = CURVE_STYLE('',#306702,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306702 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306703 = OVER_RIDING_STYLED_ITEM('overriding color',(#306704),#47847, + #306694); +#306704 = PRESENTATION_STYLE_ASSIGNMENT((#306705,#306710)); +#306705 = SURFACE_STYLE_USAGE(.BOTH.,#306706); +#306706 = SURFACE_SIDE_STYLE('',(#306707)); +#306707 = SURFACE_STYLE_FILL_AREA(#306708); +#306708 = FILL_AREA_STYLE('',(#306709)); +#306709 = FILL_AREA_STYLE_COLOUR('',#280691); +#306710 = CURVE_STYLE('',#306711,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306711 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306712 = OVER_RIDING_STYLED_ITEM('overriding color',(#306713),#47863, + #306694); +#306713 = PRESENTATION_STYLE_ASSIGNMENT((#306714,#306719)); +#306714 = SURFACE_STYLE_USAGE(.BOTH.,#306715); +#306715 = SURFACE_SIDE_STYLE('',(#306716)); +#306716 = SURFACE_STYLE_FILL_AREA(#306717); +#306717 = FILL_AREA_STYLE('',(#306718)); +#306718 = FILL_AREA_STYLE_COLOUR('',#280691); +#306719 = CURVE_STYLE('',#306720,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306720 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306721 = STYLED_ITEM('color',(#306722),#47889); +#306722 = PRESENTATION_STYLE_ASSIGNMENT((#306723,#306728)); +#306723 = SURFACE_STYLE_USAGE(.BOTH.,#306724); +#306724 = SURFACE_SIDE_STYLE('',(#306725)); +#306725 = SURFACE_STYLE_FILL_AREA(#306726); +#306726 = FILL_AREA_STYLE('',(#306727)); +#306727 = FILL_AREA_STYLE_COLOUR('',#279624); +#306728 = CURVE_STYLE('',#306729,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306729 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306730 = STYLED_ITEM('color',(#306731),#47913); +#306731 = PRESENTATION_STYLE_ASSIGNMENT((#306732,#306737)); +#306732 = SURFACE_STYLE_USAGE(.BOTH.,#306733); +#306733 = SURFACE_SIDE_STYLE('',(#306734)); +#306734 = SURFACE_STYLE_FILL_AREA(#306735); +#306735 = FILL_AREA_STYLE('',(#306736)); +#306736 = FILL_AREA_STYLE_COLOUR('',#279624); +#306737 = CURVE_STYLE('',#306738,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306738 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306739 = OVER_RIDING_STYLED_ITEM('overriding color',(#306740),#47927, + #306730); +#306740 = PRESENTATION_STYLE_ASSIGNMENT((#306741,#306746)); +#306741 = SURFACE_STYLE_USAGE(.BOTH.,#306742); +#306742 = SURFACE_SIDE_STYLE('',(#306743)); +#306743 = SURFACE_STYLE_FILL_AREA(#306744); +#306744 = FILL_AREA_STYLE('',(#306745)); +#306745 = FILL_AREA_STYLE_COLOUR('',#280691); +#306746 = CURVE_STYLE('',#306747,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306747 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306748 = OVER_RIDING_STYLED_ITEM('overriding color',(#306749),#47943, + #306730); +#306749 = PRESENTATION_STYLE_ASSIGNMENT((#306750,#306755)); +#306750 = SURFACE_STYLE_USAGE(.BOTH.,#306751); +#306751 = SURFACE_SIDE_STYLE('',(#306752)); +#306752 = SURFACE_STYLE_FILL_AREA(#306753); +#306753 = FILL_AREA_STYLE('',(#306754)); +#306754 = FILL_AREA_STYLE_COLOUR('',#280691); +#306755 = CURVE_STYLE('',#306756,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306756 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306757 = STYLED_ITEM('color',(#306758),#47962); +#306758 = PRESENTATION_STYLE_ASSIGNMENT((#306759,#306764)); +#306759 = SURFACE_STYLE_USAGE(.BOTH.,#306760); +#306760 = SURFACE_SIDE_STYLE('',(#306761)); +#306761 = SURFACE_STYLE_FILL_AREA(#306762); +#306762 = FILL_AREA_STYLE('',(#306763)); +#306763 = FILL_AREA_STYLE_COLOUR('',#279624); +#306764 = CURVE_STYLE('',#306765,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306765 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306766 = STYLED_ITEM('color',(#306767),#47993); +#306767 = PRESENTATION_STYLE_ASSIGNMENT((#306768,#306773)); +#306768 = SURFACE_STYLE_USAGE(.BOTH.,#306769); +#306769 = SURFACE_SIDE_STYLE('',(#306770)); +#306770 = SURFACE_STYLE_FILL_AREA(#306771); +#306771 = FILL_AREA_STYLE('',(#306772)); +#306772 = FILL_AREA_STYLE_COLOUR('',#279624); +#306773 = CURVE_STYLE('',#306774,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306774 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306775 = OVER_RIDING_STYLED_ITEM('overriding color',(#306776),#48007, + #306766); +#306776 = PRESENTATION_STYLE_ASSIGNMENT((#306777,#306782)); +#306777 = SURFACE_STYLE_USAGE(.BOTH.,#306778); +#306778 = SURFACE_SIDE_STYLE('',(#306779)); +#306779 = SURFACE_STYLE_FILL_AREA(#306780); +#306780 = FILL_AREA_STYLE('',(#306781)); +#306781 = FILL_AREA_STYLE_COLOUR('',#280691); +#306782 = CURVE_STYLE('',#306783,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306783 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306784 = OVER_RIDING_STYLED_ITEM('overriding color',(#306785),#48023, + #306766); +#306785 = PRESENTATION_STYLE_ASSIGNMENT((#306786,#306791)); +#306786 = SURFACE_STYLE_USAGE(.BOTH.,#306787); +#306787 = SURFACE_SIDE_STYLE('',(#306788)); +#306788 = SURFACE_STYLE_FILL_AREA(#306789); +#306789 = FILL_AREA_STYLE('',(#306790)); +#306790 = FILL_AREA_STYLE_COLOUR('',#280691); +#306791 = CURVE_STYLE('',#306792,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306792 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306793 = STYLED_ITEM('color',(#306794),#48049); +#306794 = PRESENTATION_STYLE_ASSIGNMENT((#306795,#306800)); +#306795 = SURFACE_STYLE_USAGE(.BOTH.,#306796); +#306796 = SURFACE_SIDE_STYLE('',(#306797)); +#306797 = SURFACE_STYLE_FILL_AREA(#306798); +#306798 = FILL_AREA_STYLE('',(#306799)); +#306799 = FILL_AREA_STYLE_COLOUR('',#279624); +#306800 = CURVE_STYLE('',#306801,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306801 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306802 = STYLED_ITEM('color',(#306803),#48073); +#306803 = PRESENTATION_STYLE_ASSIGNMENT((#306804,#306809)); +#306804 = SURFACE_STYLE_USAGE(.BOTH.,#306805); +#306805 = SURFACE_SIDE_STYLE('',(#306806)); +#306806 = SURFACE_STYLE_FILL_AREA(#306807); +#306807 = FILL_AREA_STYLE('',(#306808)); +#306808 = FILL_AREA_STYLE_COLOUR('',#279624); +#306809 = CURVE_STYLE('',#306810,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306810 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306811 = OVER_RIDING_STYLED_ITEM('overriding color',(#306812),#48087, + #306802); +#306812 = PRESENTATION_STYLE_ASSIGNMENT((#306813,#306818)); +#306813 = SURFACE_STYLE_USAGE(.BOTH.,#306814); +#306814 = SURFACE_SIDE_STYLE('',(#306815)); +#306815 = SURFACE_STYLE_FILL_AREA(#306816); +#306816 = FILL_AREA_STYLE('',(#306817)); +#306817 = FILL_AREA_STYLE_COLOUR('',#280691); +#306818 = CURVE_STYLE('',#306819,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306819 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306820 = OVER_RIDING_STYLED_ITEM('overriding color',(#306821),#48103, + #306802); +#306821 = PRESENTATION_STYLE_ASSIGNMENT((#306822,#306827)); +#306822 = SURFACE_STYLE_USAGE(.BOTH.,#306823); +#306823 = SURFACE_SIDE_STYLE('',(#306824)); +#306824 = SURFACE_STYLE_FILL_AREA(#306825); +#306825 = FILL_AREA_STYLE('',(#306826)); +#306826 = FILL_AREA_STYLE_COLOUR('',#280691); +#306827 = CURVE_STYLE('',#306828,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306828 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306829 = STYLED_ITEM('color',(#306830),#48122); +#306830 = PRESENTATION_STYLE_ASSIGNMENT((#306831,#306836)); +#306831 = SURFACE_STYLE_USAGE(.BOTH.,#306832); +#306832 = SURFACE_SIDE_STYLE('',(#306833)); +#306833 = SURFACE_STYLE_FILL_AREA(#306834); +#306834 = FILL_AREA_STYLE('',(#306835)); +#306835 = FILL_AREA_STYLE_COLOUR('',#279624); +#306836 = CURVE_STYLE('',#306837,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306837 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306838 = STYLED_ITEM('color',(#306839),#48153); +#306839 = PRESENTATION_STYLE_ASSIGNMENT((#306840,#306845)); +#306840 = SURFACE_STYLE_USAGE(.BOTH.,#306841); +#306841 = SURFACE_SIDE_STYLE('',(#306842)); +#306842 = SURFACE_STYLE_FILL_AREA(#306843); +#306843 = FILL_AREA_STYLE('',(#306844)); +#306844 = FILL_AREA_STYLE_COLOUR('',#279624); +#306845 = CURVE_STYLE('',#306846,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306846 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306847 = OVER_RIDING_STYLED_ITEM('overriding color',(#306848),#48167, + #306838); +#306848 = PRESENTATION_STYLE_ASSIGNMENT((#306849,#306854)); +#306849 = SURFACE_STYLE_USAGE(.BOTH.,#306850); +#306850 = SURFACE_SIDE_STYLE('',(#306851)); +#306851 = SURFACE_STYLE_FILL_AREA(#306852); +#306852 = FILL_AREA_STYLE('',(#306853)); +#306853 = FILL_AREA_STYLE_COLOUR('',#280691); +#306854 = CURVE_STYLE('',#306855,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306855 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306856 = OVER_RIDING_STYLED_ITEM('overriding color',(#306857),#48183, + #306838); +#306857 = PRESENTATION_STYLE_ASSIGNMENT((#306858,#306863)); +#306858 = SURFACE_STYLE_USAGE(.BOTH.,#306859); +#306859 = SURFACE_SIDE_STYLE('',(#306860)); +#306860 = SURFACE_STYLE_FILL_AREA(#306861); +#306861 = FILL_AREA_STYLE('',(#306862)); +#306862 = FILL_AREA_STYLE_COLOUR('',#280691); +#306863 = CURVE_STYLE('',#306864,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306864 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306865 = STYLED_ITEM('color',(#306866),#48209); +#306866 = PRESENTATION_STYLE_ASSIGNMENT((#306867,#306872)); +#306867 = SURFACE_STYLE_USAGE(.BOTH.,#306868); +#306868 = SURFACE_SIDE_STYLE('',(#306869)); +#306869 = SURFACE_STYLE_FILL_AREA(#306870); +#306870 = FILL_AREA_STYLE('',(#306871)); +#306871 = FILL_AREA_STYLE_COLOUR('',#279624); +#306872 = CURVE_STYLE('',#306873,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306873 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306874 = STYLED_ITEM('color',(#306875),#48233); +#306875 = PRESENTATION_STYLE_ASSIGNMENT((#306876,#306881)); +#306876 = SURFACE_STYLE_USAGE(.BOTH.,#306877); +#306877 = SURFACE_SIDE_STYLE('',(#306878)); +#306878 = SURFACE_STYLE_FILL_AREA(#306879); +#306879 = FILL_AREA_STYLE('',(#306880)); +#306880 = FILL_AREA_STYLE_COLOUR('',#279624); +#306881 = CURVE_STYLE('',#306882,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306882 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306883 = OVER_RIDING_STYLED_ITEM('overriding color',(#306884),#48247, + #306874); +#306884 = PRESENTATION_STYLE_ASSIGNMENT((#306885,#306890)); +#306885 = SURFACE_STYLE_USAGE(.BOTH.,#306886); +#306886 = SURFACE_SIDE_STYLE('',(#306887)); +#306887 = SURFACE_STYLE_FILL_AREA(#306888); +#306888 = FILL_AREA_STYLE('',(#306889)); +#306889 = FILL_AREA_STYLE_COLOUR('',#280691); +#306890 = CURVE_STYLE('',#306891,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306891 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306892 = OVER_RIDING_STYLED_ITEM('overriding color',(#306893),#48263, + #306874); +#306893 = PRESENTATION_STYLE_ASSIGNMENT((#306894,#306899)); +#306894 = SURFACE_STYLE_USAGE(.BOTH.,#306895); +#306895 = SURFACE_SIDE_STYLE('',(#306896)); +#306896 = SURFACE_STYLE_FILL_AREA(#306897); +#306897 = FILL_AREA_STYLE('',(#306898)); +#306898 = FILL_AREA_STYLE_COLOUR('',#280691); +#306899 = CURVE_STYLE('',#306900,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306900 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306901 = STYLED_ITEM('color',(#306902),#48282); +#306902 = PRESENTATION_STYLE_ASSIGNMENT((#306903,#306908)); +#306903 = SURFACE_STYLE_USAGE(.BOTH.,#306904); +#306904 = SURFACE_SIDE_STYLE('',(#306905)); +#306905 = SURFACE_STYLE_FILL_AREA(#306906); +#306906 = FILL_AREA_STYLE('',(#306907)); +#306907 = FILL_AREA_STYLE_COLOUR('',#279624); +#306908 = CURVE_STYLE('',#306909,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306909 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306910 = STYLED_ITEM('color',(#306911),#48313); +#306911 = PRESENTATION_STYLE_ASSIGNMENT((#306912,#306917)); +#306912 = SURFACE_STYLE_USAGE(.BOTH.,#306913); +#306913 = SURFACE_SIDE_STYLE('',(#306914)); +#306914 = SURFACE_STYLE_FILL_AREA(#306915); +#306915 = FILL_AREA_STYLE('',(#306916)); +#306916 = FILL_AREA_STYLE_COLOUR('',#279624); +#306917 = CURVE_STYLE('',#306918,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306918 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306919 = OVER_RIDING_STYLED_ITEM('overriding color',(#306920),#48327, + #306910); +#306920 = PRESENTATION_STYLE_ASSIGNMENT((#306921,#306926)); +#306921 = SURFACE_STYLE_USAGE(.BOTH.,#306922); +#306922 = SURFACE_SIDE_STYLE('',(#306923)); +#306923 = SURFACE_STYLE_FILL_AREA(#306924); +#306924 = FILL_AREA_STYLE('',(#306925)); +#306925 = FILL_AREA_STYLE_COLOUR('',#280691); +#306926 = CURVE_STYLE('',#306927,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306927 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306928 = OVER_RIDING_STYLED_ITEM('overriding color',(#306929),#48343, + #306910); +#306929 = PRESENTATION_STYLE_ASSIGNMENT((#306930,#306935)); +#306930 = SURFACE_STYLE_USAGE(.BOTH.,#306931); +#306931 = SURFACE_SIDE_STYLE('',(#306932)); +#306932 = SURFACE_STYLE_FILL_AREA(#306933); +#306933 = FILL_AREA_STYLE('',(#306934)); +#306934 = FILL_AREA_STYLE_COLOUR('',#280691); +#306935 = CURVE_STYLE('',#306936,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306936 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306937 = STYLED_ITEM('color',(#306938),#48369); +#306938 = PRESENTATION_STYLE_ASSIGNMENT((#306939,#306944)); +#306939 = SURFACE_STYLE_USAGE(.BOTH.,#306940); +#306940 = SURFACE_SIDE_STYLE('',(#306941)); +#306941 = SURFACE_STYLE_FILL_AREA(#306942); +#306942 = FILL_AREA_STYLE('',(#306943)); +#306943 = FILL_AREA_STYLE_COLOUR('',#279624); +#306944 = CURVE_STYLE('',#306945,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306945 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306946 = STYLED_ITEM('color',(#306947),#48393); +#306947 = PRESENTATION_STYLE_ASSIGNMENT((#306948,#306953)); +#306948 = SURFACE_STYLE_USAGE(.BOTH.,#306949); +#306949 = SURFACE_SIDE_STYLE('',(#306950)); +#306950 = SURFACE_STYLE_FILL_AREA(#306951); +#306951 = FILL_AREA_STYLE('',(#306952)); +#306952 = FILL_AREA_STYLE_COLOUR('',#279624); +#306953 = CURVE_STYLE('',#306954,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306954 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306955 = OVER_RIDING_STYLED_ITEM('overriding color',(#306956),#48407, + #306946); +#306956 = PRESENTATION_STYLE_ASSIGNMENT((#306957,#306962)); +#306957 = SURFACE_STYLE_USAGE(.BOTH.,#306958); +#306958 = SURFACE_SIDE_STYLE('',(#306959)); +#306959 = SURFACE_STYLE_FILL_AREA(#306960); +#306960 = FILL_AREA_STYLE('',(#306961)); +#306961 = FILL_AREA_STYLE_COLOUR('',#280691); +#306962 = CURVE_STYLE('',#306963,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306963 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306964 = OVER_RIDING_STYLED_ITEM('overriding color',(#306965),#48423, + #306946); +#306965 = PRESENTATION_STYLE_ASSIGNMENT((#306966,#306971)); +#306966 = SURFACE_STYLE_USAGE(.BOTH.,#306967); +#306967 = SURFACE_SIDE_STYLE('',(#306968)); +#306968 = SURFACE_STYLE_FILL_AREA(#306969); +#306969 = FILL_AREA_STYLE('',(#306970)); +#306970 = FILL_AREA_STYLE_COLOUR('',#280691); +#306971 = CURVE_STYLE('',#306972,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306972 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306973 = STYLED_ITEM('color',(#306974),#48442); +#306974 = PRESENTATION_STYLE_ASSIGNMENT((#306975,#306980)); +#306975 = SURFACE_STYLE_USAGE(.BOTH.,#306976); +#306976 = SURFACE_SIDE_STYLE('',(#306977)); +#306977 = SURFACE_STYLE_FILL_AREA(#306978); +#306978 = FILL_AREA_STYLE('',(#306979)); +#306979 = FILL_AREA_STYLE_COLOUR('',#279624); +#306980 = CURVE_STYLE('',#306981,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306981 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306982 = STYLED_ITEM('color',(#306983),#48473); +#306983 = PRESENTATION_STYLE_ASSIGNMENT((#306984,#306989)); +#306984 = SURFACE_STYLE_USAGE(.BOTH.,#306985); +#306985 = SURFACE_SIDE_STYLE('',(#306986)); +#306986 = SURFACE_STYLE_FILL_AREA(#306987); +#306987 = FILL_AREA_STYLE('',(#306988)); +#306988 = FILL_AREA_STYLE_COLOUR('',#279624); +#306989 = CURVE_STYLE('',#306990,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#306990 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306991 = OVER_RIDING_STYLED_ITEM('overriding color',(#306992),#48487, + #306982); +#306992 = PRESENTATION_STYLE_ASSIGNMENT((#306993,#306998)); +#306993 = SURFACE_STYLE_USAGE(.BOTH.,#306994); +#306994 = SURFACE_SIDE_STYLE('',(#306995)); +#306995 = SURFACE_STYLE_FILL_AREA(#306996); +#306996 = FILL_AREA_STYLE('',(#306997)); +#306997 = FILL_AREA_STYLE_COLOUR('',#280691); +#306998 = CURVE_STYLE('',#306999,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#306999 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307000 = OVER_RIDING_STYLED_ITEM('overriding color',(#307001),#48503, + #306982); +#307001 = PRESENTATION_STYLE_ASSIGNMENT((#307002,#307007)); +#307002 = SURFACE_STYLE_USAGE(.BOTH.,#307003); +#307003 = SURFACE_SIDE_STYLE('',(#307004)); +#307004 = SURFACE_STYLE_FILL_AREA(#307005); +#307005 = FILL_AREA_STYLE('',(#307006)); +#307006 = FILL_AREA_STYLE_COLOUR('',#280691); +#307007 = CURVE_STYLE('',#307008,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307008 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307009 = STYLED_ITEM('color',(#307010),#48529); +#307010 = PRESENTATION_STYLE_ASSIGNMENT((#307011,#307016)); +#307011 = SURFACE_STYLE_USAGE(.BOTH.,#307012); +#307012 = SURFACE_SIDE_STYLE('',(#307013)); +#307013 = SURFACE_STYLE_FILL_AREA(#307014); +#307014 = FILL_AREA_STYLE('',(#307015)); +#307015 = FILL_AREA_STYLE_COLOUR('',#279624); +#307016 = CURVE_STYLE('',#307017,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307017 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307018 = STYLED_ITEM('color',(#307019),#48553); +#307019 = PRESENTATION_STYLE_ASSIGNMENT((#307020,#307025)); +#307020 = SURFACE_STYLE_USAGE(.BOTH.,#307021); +#307021 = SURFACE_SIDE_STYLE('',(#307022)); +#307022 = SURFACE_STYLE_FILL_AREA(#307023); +#307023 = FILL_AREA_STYLE('',(#307024)); +#307024 = FILL_AREA_STYLE_COLOUR('',#279624); +#307025 = CURVE_STYLE('',#307026,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307026 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307027 = OVER_RIDING_STYLED_ITEM('overriding color',(#307028),#48567, + #307018); +#307028 = PRESENTATION_STYLE_ASSIGNMENT((#307029,#307034)); +#307029 = SURFACE_STYLE_USAGE(.BOTH.,#307030); +#307030 = SURFACE_SIDE_STYLE('',(#307031)); +#307031 = SURFACE_STYLE_FILL_AREA(#307032); +#307032 = FILL_AREA_STYLE('',(#307033)); +#307033 = FILL_AREA_STYLE_COLOUR('',#280691); +#307034 = CURVE_STYLE('',#307035,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307035 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307036 = OVER_RIDING_STYLED_ITEM('overriding color',(#307037),#48583, + #307018); +#307037 = PRESENTATION_STYLE_ASSIGNMENT((#307038,#307043)); +#307038 = SURFACE_STYLE_USAGE(.BOTH.,#307039); +#307039 = SURFACE_SIDE_STYLE('',(#307040)); +#307040 = SURFACE_STYLE_FILL_AREA(#307041); +#307041 = FILL_AREA_STYLE('',(#307042)); +#307042 = FILL_AREA_STYLE_COLOUR('',#280691); +#307043 = CURVE_STYLE('',#307044,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307044 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307045 = STYLED_ITEM('color',(#307046),#48602); +#307046 = PRESENTATION_STYLE_ASSIGNMENT((#307047,#307052)); +#307047 = SURFACE_STYLE_USAGE(.BOTH.,#307048); +#307048 = SURFACE_SIDE_STYLE('',(#307049)); +#307049 = SURFACE_STYLE_FILL_AREA(#307050); +#307050 = FILL_AREA_STYLE('',(#307051)); +#307051 = FILL_AREA_STYLE_COLOUR('',#279624); +#307052 = CURVE_STYLE('',#307053,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307053 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307054 = STYLED_ITEM('color',(#307055),#48633); +#307055 = PRESENTATION_STYLE_ASSIGNMENT((#307056,#307061)); +#307056 = SURFACE_STYLE_USAGE(.BOTH.,#307057); +#307057 = SURFACE_SIDE_STYLE('',(#307058)); +#307058 = SURFACE_STYLE_FILL_AREA(#307059); +#307059 = FILL_AREA_STYLE('',(#307060)); +#307060 = FILL_AREA_STYLE_COLOUR('',#279624); +#307061 = CURVE_STYLE('',#307062,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307062 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307063 = OVER_RIDING_STYLED_ITEM('overriding color',(#307064),#48647, + #307054); +#307064 = PRESENTATION_STYLE_ASSIGNMENT((#307065,#307070)); +#307065 = SURFACE_STYLE_USAGE(.BOTH.,#307066); +#307066 = SURFACE_SIDE_STYLE('',(#307067)); +#307067 = SURFACE_STYLE_FILL_AREA(#307068); +#307068 = FILL_AREA_STYLE('',(#307069)); +#307069 = FILL_AREA_STYLE_COLOUR('',#280691); +#307070 = CURVE_STYLE('',#307071,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307071 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307072 = OVER_RIDING_STYLED_ITEM('overriding color',(#307073),#48663, + #307054); +#307073 = PRESENTATION_STYLE_ASSIGNMENT((#307074,#307079)); +#307074 = SURFACE_STYLE_USAGE(.BOTH.,#307075); +#307075 = SURFACE_SIDE_STYLE('',(#307076)); +#307076 = SURFACE_STYLE_FILL_AREA(#307077); +#307077 = FILL_AREA_STYLE('',(#307078)); +#307078 = FILL_AREA_STYLE_COLOUR('',#280691); +#307079 = CURVE_STYLE('',#307080,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307080 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307081 = STYLED_ITEM('color',(#307082),#48689); +#307082 = PRESENTATION_STYLE_ASSIGNMENT((#307083,#307088)); +#307083 = SURFACE_STYLE_USAGE(.BOTH.,#307084); +#307084 = SURFACE_SIDE_STYLE('',(#307085)); +#307085 = SURFACE_STYLE_FILL_AREA(#307086); +#307086 = FILL_AREA_STYLE('',(#307087)); +#307087 = FILL_AREA_STYLE_COLOUR('',#279624); +#307088 = CURVE_STYLE('',#307089,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307089 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307090 = STYLED_ITEM('color',(#307091),#48713); +#307091 = PRESENTATION_STYLE_ASSIGNMENT((#307092,#307097)); +#307092 = SURFACE_STYLE_USAGE(.BOTH.,#307093); +#307093 = SURFACE_SIDE_STYLE('',(#307094)); +#307094 = SURFACE_STYLE_FILL_AREA(#307095); +#307095 = FILL_AREA_STYLE('',(#307096)); +#307096 = FILL_AREA_STYLE_COLOUR('',#279624); +#307097 = CURVE_STYLE('',#307098,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307098 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307099 = OVER_RIDING_STYLED_ITEM('overriding color',(#307100),#48727, + #307090); +#307100 = PRESENTATION_STYLE_ASSIGNMENT((#307101,#307106)); +#307101 = SURFACE_STYLE_USAGE(.BOTH.,#307102); +#307102 = SURFACE_SIDE_STYLE('',(#307103)); +#307103 = SURFACE_STYLE_FILL_AREA(#307104); +#307104 = FILL_AREA_STYLE('',(#307105)); +#307105 = FILL_AREA_STYLE_COLOUR('',#280691); +#307106 = CURVE_STYLE('',#307107,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307107 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307108 = OVER_RIDING_STYLED_ITEM('overriding color',(#307109),#48743, + #307090); +#307109 = PRESENTATION_STYLE_ASSIGNMENT((#307110,#307115)); +#307110 = SURFACE_STYLE_USAGE(.BOTH.,#307111); +#307111 = SURFACE_SIDE_STYLE('',(#307112)); +#307112 = SURFACE_STYLE_FILL_AREA(#307113); +#307113 = FILL_AREA_STYLE('',(#307114)); +#307114 = FILL_AREA_STYLE_COLOUR('',#280691); +#307115 = CURVE_STYLE('',#307116,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307116 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307117 = STYLED_ITEM('color',(#307118),#48762); +#307118 = PRESENTATION_STYLE_ASSIGNMENT((#307119,#307124)); +#307119 = SURFACE_STYLE_USAGE(.BOTH.,#307120); +#307120 = SURFACE_SIDE_STYLE('',(#307121)); +#307121 = SURFACE_STYLE_FILL_AREA(#307122); +#307122 = FILL_AREA_STYLE('',(#307123)); +#307123 = FILL_AREA_STYLE_COLOUR('',#280691); +#307124 = CURVE_STYLE('',#307125,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307125 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307126 = STYLED_ITEM('color',(#307127),#48779); +#307127 = PRESENTATION_STYLE_ASSIGNMENT((#307128,#307133)); +#307128 = SURFACE_STYLE_USAGE(.BOTH.,#307129); +#307129 = SURFACE_SIDE_STYLE('',(#307130)); +#307130 = SURFACE_STYLE_FILL_AREA(#307131); +#307131 = FILL_AREA_STYLE('',(#307132)); +#307132 = FILL_AREA_STYLE_COLOUR('',#280691); +#307133 = CURVE_STYLE('',#307134,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307134 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307135 = STYLED_ITEM('color',(#307136),#48796); +#307136 = PRESENTATION_STYLE_ASSIGNMENT((#307137,#307142)); +#307137 = SURFACE_STYLE_USAGE(.BOTH.,#307138); +#307138 = SURFACE_SIDE_STYLE('',(#307139)); +#307139 = SURFACE_STYLE_FILL_AREA(#307140); +#307140 = FILL_AREA_STYLE('',(#307141)); +#307141 = FILL_AREA_STYLE_COLOUR('',#280691); +#307142 = CURVE_STYLE('',#307143,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307143 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307144 = STYLED_ITEM('color',(#307145),#48813); +#307145 = PRESENTATION_STYLE_ASSIGNMENT((#307146,#307151)); +#307146 = SURFACE_STYLE_USAGE(.BOTH.,#307147); +#307147 = SURFACE_SIDE_STYLE('',(#307148)); +#307148 = SURFACE_STYLE_FILL_AREA(#307149); +#307149 = FILL_AREA_STYLE('',(#307150)); +#307150 = FILL_AREA_STYLE_COLOUR('',#280691); +#307151 = CURVE_STYLE('',#307152,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307152 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307153 = STYLED_ITEM('color',(#307154),#48830); +#307154 = PRESENTATION_STYLE_ASSIGNMENT((#307155,#307160)); +#307155 = SURFACE_STYLE_USAGE(.BOTH.,#307156); +#307156 = SURFACE_SIDE_STYLE('',(#307157)); +#307157 = SURFACE_STYLE_FILL_AREA(#307158); +#307158 = FILL_AREA_STYLE('',(#307159)); +#307159 = FILL_AREA_STYLE_COLOUR('',#280691); +#307160 = CURVE_STYLE('',#307161,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307161 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307162 = STYLED_ITEM('color',(#307163),#48842); +#307163 = PRESENTATION_STYLE_ASSIGNMENT((#307164,#307169)); +#307164 = SURFACE_STYLE_USAGE(.BOTH.,#307165); +#307165 = SURFACE_SIDE_STYLE('',(#307166)); +#307166 = SURFACE_STYLE_FILL_AREA(#307167); +#307167 = FILL_AREA_STYLE('',(#307168)); +#307168 = FILL_AREA_STYLE_COLOUR('',#280691); +#307169 = CURVE_STYLE('',#307170,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307170 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307171 = STYLED_ITEM('color',(#307172),#48859); +#307172 = PRESENTATION_STYLE_ASSIGNMENT((#307173,#307178)); +#307173 = SURFACE_STYLE_USAGE(.BOTH.,#307174); +#307174 = SURFACE_SIDE_STYLE('',(#307175)); +#307175 = SURFACE_STYLE_FILL_AREA(#307176); +#307176 = FILL_AREA_STYLE('',(#307177)); +#307177 = FILL_AREA_STYLE_COLOUR('',#280691); +#307178 = CURVE_STYLE('',#307179,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307179 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307180 = STYLED_ITEM('color',(#307181),#48876); +#307181 = PRESENTATION_STYLE_ASSIGNMENT((#307182,#307187)); +#307182 = SURFACE_STYLE_USAGE(.BOTH.,#307183); +#307183 = SURFACE_SIDE_STYLE('',(#307184)); +#307184 = SURFACE_STYLE_FILL_AREA(#307185); +#307185 = FILL_AREA_STYLE('',(#307186)); +#307186 = FILL_AREA_STYLE_COLOUR('',#280691); +#307187 = CURVE_STYLE('',#307188,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307188 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307189 = STYLED_ITEM('color',(#307190),#48893); +#307190 = PRESENTATION_STYLE_ASSIGNMENT((#307191,#307196)); +#307191 = SURFACE_STYLE_USAGE(.BOTH.,#307192); +#307192 = SURFACE_SIDE_STYLE('',(#307193)); +#307193 = SURFACE_STYLE_FILL_AREA(#307194); +#307194 = FILL_AREA_STYLE('',(#307195)); +#307195 = FILL_AREA_STYLE_COLOUR('',#280691); +#307196 = CURVE_STYLE('',#307197,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307197 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307198 = STYLED_ITEM('color',(#307199),#48910); +#307199 = PRESENTATION_STYLE_ASSIGNMENT((#307200,#307205)); +#307200 = SURFACE_STYLE_USAGE(.BOTH.,#307201); +#307201 = SURFACE_SIDE_STYLE('',(#307202)); +#307202 = SURFACE_STYLE_FILL_AREA(#307203); +#307203 = FILL_AREA_STYLE('',(#307204)); +#307204 = FILL_AREA_STYLE_COLOUR('',#280691); +#307205 = CURVE_STYLE('',#307206,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307206 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307207 = STYLED_ITEM('color',(#307208),#48922); +#307208 = PRESENTATION_STYLE_ASSIGNMENT((#307209,#307214)); +#307209 = SURFACE_STYLE_USAGE(.BOTH.,#307210); +#307210 = SURFACE_SIDE_STYLE('',(#307211)); +#307211 = SURFACE_STYLE_FILL_AREA(#307212); +#307212 = FILL_AREA_STYLE('',(#307213)); +#307213 = FILL_AREA_STYLE_COLOUR('',#280691); +#307214 = CURVE_STYLE('',#307215,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307215 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307216 = STYLED_ITEM('color',(#307217),#48939); +#307217 = PRESENTATION_STYLE_ASSIGNMENT((#307218,#307223)); +#307218 = SURFACE_STYLE_USAGE(.BOTH.,#307219); +#307219 = SURFACE_SIDE_STYLE('',(#307220)); +#307220 = SURFACE_STYLE_FILL_AREA(#307221); +#307221 = FILL_AREA_STYLE('',(#307222)); +#307222 = FILL_AREA_STYLE_COLOUR('',#280691); +#307223 = CURVE_STYLE('',#307224,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307224 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307225 = STYLED_ITEM('color',(#307226),#48956); +#307226 = PRESENTATION_STYLE_ASSIGNMENT((#307227,#307232)); +#307227 = SURFACE_STYLE_USAGE(.BOTH.,#307228); +#307228 = SURFACE_SIDE_STYLE('',(#307229)); +#307229 = SURFACE_STYLE_FILL_AREA(#307230); +#307230 = FILL_AREA_STYLE('',(#307231)); +#307231 = FILL_AREA_STYLE_COLOUR('',#280691); +#307232 = CURVE_STYLE('',#307233,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307233 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307234 = STYLED_ITEM('color',(#307235),#48973); +#307235 = PRESENTATION_STYLE_ASSIGNMENT((#307236,#307241)); +#307236 = SURFACE_STYLE_USAGE(.BOTH.,#307237); +#307237 = SURFACE_SIDE_STYLE('',(#307238)); +#307238 = SURFACE_STYLE_FILL_AREA(#307239); +#307239 = FILL_AREA_STYLE('',(#307240)); +#307240 = FILL_AREA_STYLE_COLOUR('',#280691); +#307241 = CURVE_STYLE('',#307242,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307242 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307243 = STYLED_ITEM('color',(#307244),#48990); +#307244 = PRESENTATION_STYLE_ASSIGNMENT((#307245,#307250)); +#307245 = SURFACE_STYLE_USAGE(.BOTH.,#307246); +#307246 = SURFACE_SIDE_STYLE('',(#307247)); +#307247 = SURFACE_STYLE_FILL_AREA(#307248); +#307248 = FILL_AREA_STYLE('',(#307249)); +#307249 = FILL_AREA_STYLE_COLOUR('',#280691); +#307250 = CURVE_STYLE('',#307251,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307251 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307252 = STYLED_ITEM('color',(#307253),#49002); +#307253 = PRESENTATION_STYLE_ASSIGNMENT((#307254,#307259)); +#307254 = SURFACE_STYLE_USAGE(.BOTH.,#307255); +#307255 = SURFACE_SIDE_STYLE('',(#307256)); +#307256 = SURFACE_STYLE_FILL_AREA(#307257); +#307257 = FILL_AREA_STYLE('',(#307258)); +#307258 = FILL_AREA_STYLE_COLOUR('',#280691); +#307259 = CURVE_STYLE('',#307260,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307260 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307261 = STYLED_ITEM('color',(#307262),#49019); +#307262 = PRESENTATION_STYLE_ASSIGNMENT((#307263,#307268)); +#307263 = SURFACE_STYLE_USAGE(.BOTH.,#307264); +#307264 = SURFACE_SIDE_STYLE('',(#307265)); +#307265 = SURFACE_STYLE_FILL_AREA(#307266); +#307266 = FILL_AREA_STYLE('',(#307267)); +#307267 = FILL_AREA_STYLE_COLOUR('',#280691); +#307268 = CURVE_STYLE('',#307269,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307269 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307270 = STYLED_ITEM('color',(#307271),#49036); +#307271 = PRESENTATION_STYLE_ASSIGNMENT((#307272,#307277)); +#307272 = SURFACE_STYLE_USAGE(.BOTH.,#307273); +#307273 = SURFACE_SIDE_STYLE('',(#307274)); +#307274 = SURFACE_STYLE_FILL_AREA(#307275); +#307275 = FILL_AREA_STYLE('',(#307276)); +#307276 = FILL_AREA_STYLE_COLOUR('',#280691); +#307277 = CURVE_STYLE('',#307278,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307278 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307279 = STYLED_ITEM('color',(#307280),#49053); +#307280 = PRESENTATION_STYLE_ASSIGNMENT((#307281,#307286)); +#307281 = SURFACE_STYLE_USAGE(.BOTH.,#307282); +#307282 = SURFACE_SIDE_STYLE('',(#307283)); +#307283 = SURFACE_STYLE_FILL_AREA(#307284); +#307284 = FILL_AREA_STYLE('',(#307285)); +#307285 = FILL_AREA_STYLE_COLOUR('',#280691); +#307286 = CURVE_STYLE('',#307287,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307287 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307288 = STYLED_ITEM('color',(#307289),#49070); +#307289 = PRESENTATION_STYLE_ASSIGNMENT((#307290,#307295)); +#307290 = SURFACE_STYLE_USAGE(.BOTH.,#307291); +#307291 = SURFACE_SIDE_STYLE('',(#307292)); +#307292 = SURFACE_STYLE_FILL_AREA(#307293); +#307293 = FILL_AREA_STYLE('',(#307294)); +#307294 = FILL_AREA_STYLE_COLOUR('',#280691); +#307295 = CURVE_STYLE('',#307296,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307296 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307297 = STYLED_ITEM('color',(#307298),#49082); +#307298 = PRESENTATION_STYLE_ASSIGNMENT((#307299,#307304)); +#307299 = SURFACE_STYLE_USAGE(.BOTH.,#307300); +#307300 = SURFACE_SIDE_STYLE('',(#307301)); +#307301 = SURFACE_STYLE_FILL_AREA(#307302); +#307302 = FILL_AREA_STYLE('',(#307303)); +#307303 = FILL_AREA_STYLE_COLOUR('',#280691); +#307304 = CURVE_STYLE('',#307305,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307305 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307306 = STYLED_ITEM('color',(#307307),#49099); +#307307 = PRESENTATION_STYLE_ASSIGNMENT((#307308,#307313)); +#307308 = SURFACE_STYLE_USAGE(.BOTH.,#307309); +#307309 = SURFACE_SIDE_STYLE('',(#307310)); +#307310 = SURFACE_STYLE_FILL_AREA(#307311); +#307311 = FILL_AREA_STYLE('',(#307312)); +#307312 = FILL_AREA_STYLE_COLOUR('',#280691); +#307313 = CURVE_STYLE('',#307314,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307314 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307315 = STYLED_ITEM('color',(#307316),#49116); +#307316 = PRESENTATION_STYLE_ASSIGNMENT((#307317,#307322)); +#307317 = SURFACE_STYLE_USAGE(.BOTH.,#307318); +#307318 = SURFACE_SIDE_STYLE('',(#307319)); +#307319 = SURFACE_STYLE_FILL_AREA(#307320); +#307320 = FILL_AREA_STYLE('',(#307321)); +#307321 = FILL_AREA_STYLE_COLOUR('',#280691); +#307322 = CURVE_STYLE('',#307323,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307323 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307324 = STYLED_ITEM('color',(#307325),#49133); +#307325 = PRESENTATION_STYLE_ASSIGNMENT((#307326,#307331)); +#307326 = SURFACE_STYLE_USAGE(.BOTH.,#307327); +#307327 = SURFACE_SIDE_STYLE('',(#307328)); +#307328 = SURFACE_STYLE_FILL_AREA(#307329); +#307329 = FILL_AREA_STYLE('',(#307330)); +#307330 = FILL_AREA_STYLE_COLOUR('',#280691); +#307331 = CURVE_STYLE('',#307332,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307332 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307333 = STYLED_ITEM('color',(#307334),#49150); +#307334 = PRESENTATION_STYLE_ASSIGNMENT((#307335,#307340)); +#307335 = SURFACE_STYLE_USAGE(.BOTH.,#307336); +#307336 = SURFACE_SIDE_STYLE('',(#307337)); +#307337 = SURFACE_STYLE_FILL_AREA(#307338); +#307338 = FILL_AREA_STYLE('',(#307339)); +#307339 = FILL_AREA_STYLE_COLOUR('',#280691); +#307340 = CURVE_STYLE('',#307341,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307341 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307342 = STYLED_ITEM('color',(#307343),#49162); +#307343 = PRESENTATION_STYLE_ASSIGNMENT((#307344,#307349)); +#307344 = SURFACE_STYLE_USAGE(.BOTH.,#307345); +#307345 = SURFACE_SIDE_STYLE('',(#307346)); +#307346 = SURFACE_STYLE_FILL_AREA(#307347); +#307347 = FILL_AREA_STYLE('',(#307348)); +#307348 = FILL_AREA_STYLE_COLOUR('',#280691); +#307349 = CURVE_STYLE('',#307350,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307350 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307351 = STYLED_ITEM('color',(#307352),#49179); +#307352 = PRESENTATION_STYLE_ASSIGNMENT((#307353,#307358)); +#307353 = SURFACE_STYLE_USAGE(.BOTH.,#307354); +#307354 = SURFACE_SIDE_STYLE('',(#307355)); +#307355 = SURFACE_STYLE_FILL_AREA(#307356); +#307356 = FILL_AREA_STYLE('',(#307357)); +#307357 = FILL_AREA_STYLE_COLOUR('',#280691); +#307358 = CURVE_STYLE('',#307359,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307359 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307360 = STYLED_ITEM('color',(#307361),#49196); +#307361 = PRESENTATION_STYLE_ASSIGNMENT((#307362,#307367)); +#307362 = SURFACE_STYLE_USAGE(.BOTH.,#307363); +#307363 = SURFACE_SIDE_STYLE('',(#307364)); +#307364 = SURFACE_STYLE_FILL_AREA(#307365); +#307365 = FILL_AREA_STYLE('',(#307366)); +#307366 = FILL_AREA_STYLE_COLOUR('',#280691); +#307367 = CURVE_STYLE('',#307368,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307368 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307369 = STYLED_ITEM('color',(#307370),#49213); +#307370 = PRESENTATION_STYLE_ASSIGNMENT((#307371,#307376)); +#307371 = SURFACE_STYLE_USAGE(.BOTH.,#307372); +#307372 = SURFACE_SIDE_STYLE('',(#307373)); +#307373 = SURFACE_STYLE_FILL_AREA(#307374); +#307374 = FILL_AREA_STYLE('',(#307375)); +#307375 = FILL_AREA_STYLE_COLOUR('',#280691); +#307376 = CURVE_STYLE('',#307377,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307377 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307378 = STYLED_ITEM('color',(#307379),#49230); +#307379 = PRESENTATION_STYLE_ASSIGNMENT((#307380,#307385)); +#307380 = SURFACE_STYLE_USAGE(.BOTH.,#307381); +#307381 = SURFACE_SIDE_STYLE('',(#307382)); +#307382 = SURFACE_STYLE_FILL_AREA(#307383); +#307383 = FILL_AREA_STYLE('',(#307384)); +#307384 = FILL_AREA_STYLE_COLOUR('',#280691); +#307385 = CURVE_STYLE('',#307386,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307386 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307387 = STYLED_ITEM('color',(#307388),#49242); +#307388 = PRESENTATION_STYLE_ASSIGNMENT((#307389,#307394)); +#307389 = SURFACE_STYLE_USAGE(.BOTH.,#307390); +#307390 = SURFACE_SIDE_STYLE('',(#307391)); +#307391 = SURFACE_STYLE_FILL_AREA(#307392); +#307392 = FILL_AREA_STYLE('',(#307393)); +#307393 = FILL_AREA_STYLE_COLOUR('',#280691); +#307394 = CURVE_STYLE('',#307395,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307395 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307396 = STYLED_ITEM('color',(#307397),#49259); +#307397 = PRESENTATION_STYLE_ASSIGNMENT((#307398,#307403)); +#307398 = SURFACE_STYLE_USAGE(.BOTH.,#307399); +#307399 = SURFACE_SIDE_STYLE('',(#307400)); +#307400 = SURFACE_STYLE_FILL_AREA(#307401); +#307401 = FILL_AREA_STYLE('',(#307402)); +#307402 = FILL_AREA_STYLE_COLOUR('',#280691); +#307403 = CURVE_STYLE('',#307404,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307404 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307405 = STYLED_ITEM('color',(#307406),#49276); +#307406 = PRESENTATION_STYLE_ASSIGNMENT((#307407,#307412)); +#307407 = SURFACE_STYLE_USAGE(.BOTH.,#307408); +#307408 = SURFACE_SIDE_STYLE('',(#307409)); +#307409 = SURFACE_STYLE_FILL_AREA(#307410); +#307410 = FILL_AREA_STYLE('',(#307411)); +#307411 = FILL_AREA_STYLE_COLOUR('',#280691); +#307412 = CURVE_STYLE('',#307413,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307413 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307414 = STYLED_ITEM('color',(#307415),#49293); +#307415 = PRESENTATION_STYLE_ASSIGNMENT((#307416,#307421)); +#307416 = SURFACE_STYLE_USAGE(.BOTH.,#307417); +#307417 = SURFACE_SIDE_STYLE('',(#307418)); +#307418 = SURFACE_STYLE_FILL_AREA(#307419); +#307419 = FILL_AREA_STYLE('',(#307420)); +#307420 = FILL_AREA_STYLE_COLOUR('',#280691); +#307421 = CURVE_STYLE('',#307422,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307422 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307423 = STYLED_ITEM('color',(#307424),#49310); +#307424 = PRESENTATION_STYLE_ASSIGNMENT((#307425,#307430)); +#307425 = SURFACE_STYLE_USAGE(.BOTH.,#307426); +#307426 = SURFACE_SIDE_STYLE('',(#307427)); +#307427 = SURFACE_STYLE_FILL_AREA(#307428); +#307428 = FILL_AREA_STYLE('',(#307429)); +#307429 = FILL_AREA_STYLE_COLOUR('',#280691); +#307430 = CURVE_STYLE('',#307431,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307431 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307432 = STYLED_ITEM('color',(#307433),#49322); +#307433 = PRESENTATION_STYLE_ASSIGNMENT((#307434,#307439)); +#307434 = SURFACE_STYLE_USAGE(.BOTH.,#307435); +#307435 = SURFACE_SIDE_STYLE('',(#307436)); +#307436 = SURFACE_STYLE_FILL_AREA(#307437); +#307437 = FILL_AREA_STYLE('',(#307438)); +#307438 = FILL_AREA_STYLE_COLOUR('',#280691); +#307439 = CURVE_STYLE('',#307440,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307440 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307441 = STYLED_ITEM('color',(#307442),#49339); +#307442 = PRESENTATION_STYLE_ASSIGNMENT((#307443,#307448)); +#307443 = SURFACE_STYLE_USAGE(.BOTH.,#307444); +#307444 = SURFACE_SIDE_STYLE('',(#307445)); +#307445 = SURFACE_STYLE_FILL_AREA(#307446); +#307446 = FILL_AREA_STYLE('',(#307447)); +#307447 = FILL_AREA_STYLE_COLOUR('',#280691); +#307448 = CURVE_STYLE('',#307449,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307450 = STYLED_ITEM('color',(#307451),#49356); +#307451 = PRESENTATION_STYLE_ASSIGNMENT((#307452,#307457)); +#307452 = SURFACE_STYLE_USAGE(.BOTH.,#307453); +#307453 = SURFACE_SIDE_STYLE('',(#307454)); +#307454 = SURFACE_STYLE_FILL_AREA(#307455); +#307455 = FILL_AREA_STYLE('',(#307456)); +#307456 = FILL_AREA_STYLE_COLOUR('',#280691); +#307457 = CURVE_STYLE('',#307458,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307458 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307459 = STYLED_ITEM('color',(#307460),#49373); +#307460 = PRESENTATION_STYLE_ASSIGNMENT((#307461,#307466)); +#307461 = SURFACE_STYLE_USAGE(.BOTH.,#307462); +#307462 = SURFACE_SIDE_STYLE('',(#307463)); +#307463 = SURFACE_STYLE_FILL_AREA(#307464); +#307464 = FILL_AREA_STYLE('',(#307465)); +#307465 = FILL_AREA_STYLE_COLOUR('',#280691); +#307466 = CURVE_STYLE('',#307467,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307467 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307468 = STYLED_ITEM('color',(#307469),#49390); +#307469 = PRESENTATION_STYLE_ASSIGNMENT((#307470,#307475)); +#307470 = SURFACE_STYLE_USAGE(.BOTH.,#307471); +#307471 = SURFACE_SIDE_STYLE('',(#307472)); +#307472 = SURFACE_STYLE_FILL_AREA(#307473); +#307473 = FILL_AREA_STYLE('',(#307474)); +#307474 = FILL_AREA_STYLE_COLOUR('',#280691); +#307475 = CURVE_STYLE('',#307476,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307476 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307477 = STYLED_ITEM('color',(#307478),#49402); +#307478 = PRESENTATION_STYLE_ASSIGNMENT((#307479,#307484)); +#307479 = SURFACE_STYLE_USAGE(.BOTH.,#307480); +#307480 = SURFACE_SIDE_STYLE('',(#307481)); +#307481 = SURFACE_STYLE_FILL_AREA(#307482); +#307482 = FILL_AREA_STYLE('',(#307483)); +#307483 = FILL_AREA_STYLE_COLOUR('',#280691); +#307484 = CURVE_STYLE('',#307485,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307485 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307486 = STYLED_ITEM('color',(#307487),#49419); +#307487 = PRESENTATION_STYLE_ASSIGNMENT((#307488,#307493)); +#307488 = SURFACE_STYLE_USAGE(.BOTH.,#307489); +#307489 = SURFACE_SIDE_STYLE('',(#307490)); +#307490 = SURFACE_STYLE_FILL_AREA(#307491); +#307491 = FILL_AREA_STYLE('',(#307492)); +#307492 = FILL_AREA_STYLE_COLOUR('',#280691); +#307493 = CURVE_STYLE('',#307494,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307494 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307495 = STYLED_ITEM('color',(#307496),#49436); +#307496 = PRESENTATION_STYLE_ASSIGNMENT((#307497,#307502)); +#307497 = SURFACE_STYLE_USAGE(.BOTH.,#307498); +#307498 = SURFACE_SIDE_STYLE('',(#307499)); +#307499 = SURFACE_STYLE_FILL_AREA(#307500); +#307500 = FILL_AREA_STYLE('',(#307501)); +#307501 = FILL_AREA_STYLE_COLOUR('',#280691); +#307502 = CURVE_STYLE('',#307503,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307504 = STYLED_ITEM('color',(#307505),#49453); +#307505 = PRESENTATION_STYLE_ASSIGNMENT((#307506,#307511)); +#307506 = SURFACE_STYLE_USAGE(.BOTH.,#307507); +#307507 = SURFACE_SIDE_STYLE('',(#307508)); +#307508 = SURFACE_STYLE_FILL_AREA(#307509); +#307509 = FILL_AREA_STYLE('',(#307510)); +#307510 = FILL_AREA_STYLE_COLOUR('',#280691); +#307511 = CURVE_STYLE('',#307512,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307513 = STYLED_ITEM('color',(#307514),#49470); +#307514 = PRESENTATION_STYLE_ASSIGNMENT((#307515,#307520)); +#307515 = SURFACE_STYLE_USAGE(.BOTH.,#307516); +#307516 = SURFACE_SIDE_STYLE('',(#307517)); +#307517 = SURFACE_STYLE_FILL_AREA(#307518); +#307518 = FILL_AREA_STYLE('',(#307519)); +#307519 = FILL_AREA_STYLE_COLOUR('',#280691); +#307520 = CURVE_STYLE('',#307521,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307522 = STYLED_ITEM('color',(#307523),#49482); +#307523 = PRESENTATION_STYLE_ASSIGNMENT((#307524,#307529)); +#307524 = SURFACE_STYLE_USAGE(.BOTH.,#307525); +#307525 = SURFACE_SIDE_STYLE('',(#307526)); +#307526 = SURFACE_STYLE_FILL_AREA(#307527); +#307527 = FILL_AREA_STYLE('',(#307528)); +#307528 = FILL_AREA_STYLE_COLOUR('',#280691); +#307529 = CURVE_STYLE('',#307530,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307531 = STYLED_ITEM('color',(#307532),#49499); +#307532 = PRESENTATION_STYLE_ASSIGNMENT((#307533,#307538)); +#307533 = SURFACE_STYLE_USAGE(.BOTH.,#307534); +#307534 = SURFACE_SIDE_STYLE('',(#307535)); +#307535 = SURFACE_STYLE_FILL_AREA(#307536); +#307536 = FILL_AREA_STYLE('',(#307537)); +#307537 = FILL_AREA_STYLE_COLOUR('',#280691); +#307538 = CURVE_STYLE('',#307539,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307539 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307540 = STYLED_ITEM('color',(#307541),#49516); +#307541 = PRESENTATION_STYLE_ASSIGNMENT((#307542,#307547)); +#307542 = SURFACE_STYLE_USAGE(.BOTH.,#307543); +#307543 = SURFACE_SIDE_STYLE('',(#307544)); +#307544 = SURFACE_STYLE_FILL_AREA(#307545); +#307545 = FILL_AREA_STYLE('',(#307546)); +#307546 = FILL_AREA_STYLE_COLOUR('',#280691); +#307547 = CURVE_STYLE('',#307548,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307548 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307549 = STYLED_ITEM('color',(#307550),#49533); +#307550 = PRESENTATION_STYLE_ASSIGNMENT((#307551,#307556)); +#307551 = SURFACE_STYLE_USAGE(.BOTH.,#307552); +#307552 = SURFACE_SIDE_STYLE('',(#307553)); +#307553 = SURFACE_STYLE_FILL_AREA(#307554); +#307554 = FILL_AREA_STYLE('',(#307555)); +#307555 = FILL_AREA_STYLE_COLOUR('',#280691); +#307556 = CURVE_STYLE('',#307557,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307557 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307558 = STYLED_ITEM('color',(#307559),#49550); +#307559 = PRESENTATION_STYLE_ASSIGNMENT((#307560,#307565)); +#307560 = SURFACE_STYLE_USAGE(.BOTH.,#307561); +#307561 = SURFACE_SIDE_STYLE('',(#307562)); +#307562 = SURFACE_STYLE_FILL_AREA(#307563); +#307563 = FILL_AREA_STYLE('',(#307564)); +#307564 = FILL_AREA_STYLE_COLOUR('',#280691); +#307565 = CURVE_STYLE('',#307566,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307566 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307567 = STYLED_ITEM('color',(#307568),#49562); +#307568 = PRESENTATION_STYLE_ASSIGNMENT((#307569,#307574)); +#307569 = SURFACE_STYLE_USAGE(.BOTH.,#307570); +#307570 = SURFACE_SIDE_STYLE('',(#307571)); +#307571 = SURFACE_STYLE_FILL_AREA(#307572); +#307572 = FILL_AREA_STYLE('',(#307573)); +#307573 = FILL_AREA_STYLE_COLOUR('',#279624); +#307574 = CURVE_STYLE('',#307575,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307575 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307576 = OVER_RIDING_STYLED_ITEM('overriding color',(#307577),#49569, + #307567); +#307577 = PRESENTATION_STYLE_ASSIGNMENT((#307578,#307583)); +#307578 = SURFACE_STYLE_USAGE(.BOTH.,#307579); +#307579 = SURFACE_SIDE_STYLE('',(#307580)); +#307580 = SURFACE_STYLE_FILL_AREA(#307581); +#307581 = FILL_AREA_STYLE('',(#307582)); +#307582 = FILL_AREA_STYLE_COLOUR('',#280691); +#307583 = CURVE_STYLE('',#307584,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307584 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307585 = STYLED_ITEM('color',(#307586),#49579); +#307586 = PRESENTATION_STYLE_ASSIGNMENT((#307587,#307592)); +#307587 = SURFACE_STYLE_USAGE(.BOTH.,#307588); +#307588 = SURFACE_SIDE_STYLE('',(#307589)); +#307589 = SURFACE_STYLE_FILL_AREA(#307590); +#307590 = FILL_AREA_STYLE('',(#307591)); +#307591 = FILL_AREA_STYLE_COLOUR('',#279624); +#307592 = CURVE_STYLE('',#307593,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307593 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307594 = OVER_RIDING_STYLED_ITEM('overriding color',(#307595),#49584, + #307585); +#307595 = PRESENTATION_STYLE_ASSIGNMENT((#307596,#307601)); +#307596 = SURFACE_STYLE_USAGE(.BOTH.,#307597); +#307597 = SURFACE_SIDE_STYLE('',(#307598)); +#307598 = SURFACE_STYLE_FILL_AREA(#307599); +#307599 = FILL_AREA_STYLE('',(#307600)); +#307600 = FILL_AREA_STYLE_COLOUR('',#280691); +#307601 = CURVE_STYLE('',#307602,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307602 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307603 = STYLED_ITEM('color',(#307604),#49596); +#307604 = PRESENTATION_STYLE_ASSIGNMENT((#307605,#307610)); +#307605 = SURFACE_STYLE_USAGE(.BOTH.,#307606); +#307606 = SURFACE_SIDE_STYLE('',(#307607)); +#307607 = SURFACE_STYLE_FILL_AREA(#307608); +#307608 = FILL_AREA_STYLE('',(#307609)); +#307609 = FILL_AREA_STYLE_COLOUR('',#280691); +#307610 = CURVE_STYLE('',#307611,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307611 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307612 = STYLED_ITEM('color',(#307613),#49645); +#307613 = PRESENTATION_STYLE_ASSIGNMENT((#307614,#307619)); +#307614 = SURFACE_STYLE_USAGE(.BOTH.,#307615); +#307615 = SURFACE_SIDE_STYLE('',(#307616)); +#307616 = SURFACE_STYLE_FILL_AREA(#307617); +#307617 = FILL_AREA_STYLE('',(#307618)); +#307618 = FILL_AREA_STYLE_COLOUR('',#280691); +#307619 = CURVE_STYLE('',#307620,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307620 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307621 = STYLED_ITEM('color',(#307622),#49669); +#307622 = PRESENTATION_STYLE_ASSIGNMENT((#307623,#307628)); +#307623 = SURFACE_STYLE_USAGE(.BOTH.,#307624); +#307624 = SURFACE_SIDE_STYLE('',(#307625)); +#307625 = SURFACE_STYLE_FILL_AREA(#307626); +#307626 = FILL_AREA_STYLE('',(#307627)); +#307627 = FILL_AREA_STYLE_COLOUR('',#280691); +#307628 = CURVE_STYLE('',#307629,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307629 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307630 = STYLED_ITEM('color',(#307631),#49711); +#307631 = PRESENTATION_STYLE_ASSIGNMENT((#307632,#307637)); +#307632 = SURFACE_STYLE_USAGE(.BOTH.,#307633); +#307633 = SURFACE_SIDE_STYLE('',(#307634)); +#307634 = SURFACE_STYLE_FILL_AREA(#307635); +#307635 = FILL_AREA_STYLE('',(#307636)); +#307636 = FILL_AREA_STYLE_COLOUR('',#280691); +#307637 = CURVE_STYLE('',#307638,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307638 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307639 = STYLED_ITEM('color',(#307640),#49728); +#307640 = PRESENTATION_STYLE_ASSIGNMENT((#307641,#307646)); +#307641 = SURFACE_STYLE_USAGE(.BOTH.,#307642); +#307642 = SURFACE_SIDE_STYLE('',(#307643)); +#307643 = SURFACE_STYLE_FILL_AREA(#307644); +#307644 = FILL_AREA_STYLE('',(#307645)); +#307645 = FILL_AREA_STYLE_COLOUR('',#279624); +#307646 = CURVE_STYLE('',#307647,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307648 = OVER_RIDING_STYLED_ITEM('overriding color',(#307649),#49735, + #307639); +#307649 = PRESENTATION_STYLE_ASSIGNMENT((#307650,#307655)); +#307650 = SURFACE_STYLE_USAGE(.BOTH.,#307651); +#307651 = SURFACE_SIDE_STYLE('',(#307652)); +#307652 = SURFACE_STYLE_FILL_AREA(#307653); +#307653 = FILL_AREA_STYLE('',(#307654)); +#307654 = FILL_AREA_STYLE_COLOUR('',#280691); +#307655 = CURVE_STYLE('',#307656,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307656 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307657 = STYLED_ITEM('color',(#307658),#49745); +#307658 = PRESENTATION_STYLE_ASSIGNMENT((#307659,#307664)); +#307659 = SURFACE_STYLE_USAGE(.BOTH.,#307660); +#307660 = SURFACE_SIDE_STYLE('',(#307661)); +#307661 = SURFACE_STYLE_FILL_AREA(#307662); +#307662 = FILL_AREA_STYLE('',(#307663)); +#307663 = FILL_AREA_STYLE_COLOUR('',#279624); +#307664 = CURVE_STYLE('',#307665,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307665 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307666 = OVER_RIDING_STYLED_ITEM('overriding color',(#307667),#49750, + #307657); +#307667 = PRESENTATION_STYLE_ASSIGNMENT((#307668,#307673)); +#307668 = SURFACE_STYLE_USAGE(.BOTH.,#307669); +#307669 = SURFACE_SIDE_STYLE('',(#307670)); +#307670 = SURFACE_STYLE_FILL_AREA(#307671); +#307671 = FILL_AREA_STYLE('',(#307672)); +#307672 = FILL_AREA_STYLE_COLOUR('',#280691); +#307673 = CURVE_STYLE('',#307674,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307674 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307675 = STYLED_ITEM('color',(#307676),#49762); +#307676 = PRESENTATION_STYLE_ASSIGNMENT((#307677,#307682)); +#307677 = SURFACE_STYLE_USAGE(.BOTH.,#307678); +#307678 = SURFACE_SIDE_STYLE('',(#307679)); +#307679 = SURFACE_STYLE_FILL_AREA(#307680); +#307680 = FILL_AREA_STYLE('',(#307681)); +#307681 = FILL_AREA_STYLE_COLOUR('',#280691); +#307682 = CURVE_STYLE('',#307683,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307684 = STYLED_ITEM('color',(#307685),#49811); +#307685 = PRESENTATION_STYLE_ASSIGNMENT((#307686,#307691)); +#307686 = SURFACE_STYLE_USAGE(.BOTH.,#307687); +#307687 = SURFACE_SIDE_STYLE('',(#307688)); +#307688 = SURFACE_STYLE_FILL_AREA(#307689); +#307689 = FILL_AREA_STYLE('',(#307690)); +#307690 = FILL_AREA_STYLE_COLOUR('',#280691); +#307691 = CURVE_STYLE('',#307692,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307692 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307693 = STYLED_ITEM('color',(#307694),#49835); +#307694 = PRESENTATION_STYLE_ASSIGNMENT((#307695,#307700)); +#307695 = SURFACE_STYLE_USAGE(.BOTH.,#307696); +#307696 = SURFACE_SIDE_STYLE('',(#307697)); +#307697 = SURFACE_STYLE_FILL_AREA(#307698); +#307698 = FILL_AREA_STYLE('',(#307699)); +#307699 = FILL_AREA_STYLE_COLOUR('',#280691); +#307700 = CURVE_STYLE('',#307701,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307701 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307702 = STYLED_ITEM('color',(#307703),#49877); +#307703 = PRESENTATION_STYLE_ASSIGNMENT((#307704,#307709)); +#307704 = SURFACE_STYLE_USAGE(.BOTH.,#307705); +#307705 = SURFACE_SIDE_STYLE('',(#307706)); +#307706 = SURFACE_STYLE_FILL_AREA(#307707); +#307707 = FILL_AREA_STYLE('',(#307708)); +#307708 = FILL_AREA_STYLE_COLOUR('',#280691); +#307709 = CURVE_STYLE('',#307710,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307710 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307711 = STYLED_ITEM('color',(#307712),#49894); +#307712 = PRESENTATION_STYLE_ASSIGNMENT((#307713,#307718)); +#307713 = SURFACE_STYLE_USAGE(.BOTH.,#307714); +#307714 = SURFACE_SIDE_STYLE('',(#307715)); +#307715 = SURFACE_STYLE_FILL_AREA(#307716); +#307716 = FILL_AREA_STYLE('',(#307717)); +#307717 = FILL_AREA_STYLE_COLOUR('',#279624); +#307718 = CURVE_STYLE('',#307719,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307719 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307720 = OVER_RIDING_STYLED_ITEM('overriding color',(#307721),#49901, + #307711); +#307721 = PRESENTATION_STYLE_ASSIGNMENT((#307722,#307727)); +#307722 = SURFACE_STYLE_USAGE(.BOTH.,#307723); +#307723 = SURFACE_SIDE_STYLE('',(#307724)); +#307724 = SURFACE_STYLE_FILL_AREA(#307725); +#307725 = FILL_AREA_STYLE('',(#307726)); +#307726 = FILL_AREA_STYLE_COLOUR('',#280691); +#307727 = CURVE_STYLE('',#307728,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307728 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307729 = STYLED_ITEM('color',(#307730),#49911); +#307730 = PRESENTATION_STYLE_ASSIGNMENT((#307731,#307736)); +#307731 = SURFACE_STYLE_USAGE(.BOTH.,#307732); +#307732 = SURFACE_SIDE_STYLE('',(#307733)); +#307733 = SURFACE_STYLE_FILL_AREA(#307734); +#307734 = FILL_AREA_STYLE('',(#307735)); +#307735 = FILL_AREA_STYLE_COLOUR('',#279624); +#307736 = CURVE_STYLE('',#307737,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307737 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307738 = OVER_RIDING_STYLED_ITEM('overriding color',(#307739),#49916, + #307729); +#307739 = PRESENTATION_STYLE_ASSIGNMENT((#307740,#307745)); +#307740 = SURFACE_STYLE_USAGE(.BOTH.,#307741); +#307741 = SURFACE_SIDE_STYLE('',(#307742)); +#307742 = SURFACE_STYLE_FILL_AREA(#307743); +#307743 = FILL_AREA_STYLE('',(#307744)); +#307744 = FILL_AREA_STYLE_COLOUR('',#280691); +#307745 = CURVE_STYLE('',#307746,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307746 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307747 = STYLED_ITEM('color',(#307748),#49928); +#307748 = PRESENTATION_STYLE_ASSIGNMENT((#307749,#307754)); +#307749 = SURFACE_STYLE_USAGE(.BOTH.,#307750); +#307750 = SURFACE_SIDE_STYLE('',(#307751)); +#307751 = SURFACE_STYLE_FILL_AREA(#307752); +#307752 = FILL_AREA_STYLE('',(#307753)); +#307753 = FILL_AREA_STYLE_COLOUR('',#280691); +#307754 = CURVE_STYLE('',#307755,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307755 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307756 = STYLED_ITEM('color',(#307757),#49977); +#307757 = PRESENTATION_STYLE_ASSIGNMENT((#307758,#307763)); +#307758 = SURFACE_STYLE_USAGE(.BOTH.,#307759); +#307759 = SURFACE_SIDE_STYLE('',(#307760)); +#307760 = SURFACE_STYLE_FILL_AREA(#307761); +#307761 = FILL_AREA_STYLE('',(#307762)); +#307762 = FILL_AREA_STYLE_COLOUR('',#280691); +#307763 = CURVE_STYLE('',#307764,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307764 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307765 = STYLED_ITEM('color',(#307766),#50001); +#307766 = PRESENTATION_STYLE_ASSIGNMENT((#307767,#307772)); +#307767 = SURFACE_STYLE_USAGE(.BOTH.,#307768); +#307768 = SURFACE_SIDE_STYLE('',(#307769)); +#307769 = SURFACE_STYLE_FILL_AREA(#307770); +#307770 = FILL_AREA_STYLE('',(#307771)); +#307771 = FILL_AREA_STYLE_COLOUR('',#280691); +#307772 = CURVE_STYLE('',#307773,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307774 = STYLED_ITEM('color',(#307775),#50043); +#307775 = PRESENTATION_STYLE_ASSIGNMENT((#307776,#307781)); +#307776 = SURFACE_STYLE_USAGE(.BOTH.,#307777); +#307777 = SURFACE_SIDE_STYLE('',(#307778)); +#307778 = SURFACE_STYLE_FILL_AREA(#307779); +#307779 = FILL_AREA_STYLE('',(#307780)); +#307780 = FILL_AREA_STYLE_COLOUR('',#280691); +#307781 = CURVE_STYLE('',#307782,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307782 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307783 = STYLED_ITEM('color',(#307784),#50060); +#307784 = PRESENTATION_STYLE_ASSIGNMENT((#307785,#307790)); +#307785 = SURFACE_STYLE_USAGE(.BOTH.,#307786); +#307786 = SURFACE_SIDE_STYLE('',(#307787)); +#307787 = SURFACE_STYLE_FILL_AREA(#307788); +#307788 = FILL_AREA_STYLE('',(#307789)); +#307789 = FILL_AREA_STYLE_COLOUR('',#279624); +#307790 = CURVE_STYLE('',#307791,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307791 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307792 = OVER_RIDING_STYLED_ITEM('overriding color',(#307793),#50067, + #307783); +#307793 = PRESENTATION_STYLE_ASSIGNMENT((#307794,#307799)); +#307794 = SURFACE_STYLE_USAGE(.BOTH.,#307795); +#307795 = SURFACE_SIDE_STYLE('',(#307796)); +#307796 = SURFACE_STYLE_FILL_AREA(#307797); +#307797 = FILL_AREA_STYLE('',(#307798)); +#307798 = FILL_AREA_STYLE_COLOUR('',#280691); +#307799 = CURVE_STYLE('',#307800,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307800 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307801 = STYLED_ITEM('color',(#307802),#50077); +#307802 = PRESENTATION_STYLE_ASSIGNMENT((#307803,#307808)); +#307803 = SURFACE_STYLE_USAGE(.BOTH.,#307804); +#307804 = SURFACE_SIDE_STYLE('',(#307805)); +#307805 = SURFACE_STYLE_FILL_AREA(#307806); +#307806 = FILL_AREA_STYLE('',(#307807)); +#307807 = FILL_AREA_STYLE_COLOUR('',#279624); +#307808 = CURVE_STYLE('',#307809,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307809 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307810 = OVER_RIDING_STYLED_ITEM('overriding color',(#307811),#50082, + #307801); +#307811 = PRESENTATION_STYLE_ASSIGNMENT((#307812,#307817)); +#307812 = SURFACE_STYLE_USAGE(.BOTH.,#307813); +#307813 = SURFACE_SIDE_STYLE('',(#307814)); +#307814 = SURFACE_STYLE_FILL_AREA(#307815); +#307815 = FILL_AREA_STYLE('',(#307816)); +#307816 = FILL_AREA_STYLE_COLOUR('',#280691); +#307817 = CURVE_STYLE('',#307818,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307818 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307819 = STYLED_ITEM('color',(#307820),#50094); +#307820 = PRESENTATION_STYLE_ASSIGNMENT((#307821,#307826)); +#307821 = SURFACE_STYLE_USAGE(.BOTH.,#307822); +#307822 = SURFACE_SIDE_STYLE('',(#307823)); +#307823 = SURFACE_STYLE_FILL_AREA(#307824); +#307824 = FILL_AREA_STYLE('',(#307825)); +#307825 = FILL_AREA_STYLE_COLOUR('',#280691); +#307826 = CURVE_STYLE('',#307827,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307827 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307828 = STYLED_ITEM('color',(#307829),#50143); +#307829 = PRESENTATION_STYLE_ASSIGNMENT((#307830,#307835)); +#307830 = SURFACE_STYLE_USAGE(.BOTH.,#307831); +#307831 = SURFACE_SIDE_STYLE('',(#307832)); +#307832 = SURFACE_STYLE_FILL_AREA(#307833); +#307833 = FILL_AREA_STYLE('',(#307834)); +#307834 = FILL_AREA_STYLE_COLOUR('',#280691); +#307835 = CURVE_STYLE('',#307836,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307836 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307837 = STYLED_ITEM('color',(#307838),#50167); +#307838 = PRESENTATION_STYLE_ASSIGNMENT((#307839,#307844)); +#307839 = SURFACE_STYLE_USAGE(.BOTH.,#307840); +#307840 = SURFACE_SIDE_STYLE('',(#307841)); +#307841 = SURFACE_STYLE_FILL_AREA(#307842); +#307842 = FILL_AREA_STYLE('',(#307843)); +#307843 = FILL_AREA_STYLE_COLOUR('',#280691); +#307844 = CURVE_STYLE('',#307845,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307845 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307846 = STYLED_ITEM('color',(#307847),#50209); +#307847 = PRESENTATION_STYLE_ASSIGNMENT((#307848,#307853)); +#307848 = SURFACE_STYLE_USAGE(.BOTH.,#307849); +#307849 = SURFACE_SIDE_STYLE('',(#307850)); +#307850 = SURFACE_STYLE_FILL_AREA(#307851); +#307851 = FILL_AREA_STYLE('',(#307852)); +#307852 = FILL_AREA_STYLE_COLOUR('',#280691); +#307853 = CURVE_STYLE('',#307854,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307854 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307855 = STYLED_ITEM('color',(#307856),#50226); +#307856 = PRESENTATION_STYLE_ASSIGNMENT((#307857,#307862)); +#307857 = SURFACE_STYLE_USAGE(.BOTH.,#307858); +#307858 = SURFACE_SIDE_STYLE('',(#307859)); +#307859 = SURFACE_STYLE_FILL_AREA(#307860); +#307860 = FILL_AREA_STYLE('',(#307861)); +#307861 = FILL_AREA_STYLE_COLOUR('',#279624); +#307862 = CURVE_STYLE('',#307863,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307864 = OVER_RIDING_STYLED_ITEM('overriding color',(#307865),#50233, + #307855); +#307865 = PRESENTATION_STYLE_ASSIGNMENT((#307866,#307871)); +#307866 = SURFACE_STYLE_USAGE(.BOTH.,#307867); +#307867 = SURFACE_SIDE_STYLE('',(#307868)); +#307868 = SURFACE_STYLE_FILL_AREA(#307869); +#307869 = FILL_AREA_STYLE('',(#307870)); +#307870 = FILL_AREA_STYLE_COLOUR('',#280691); +#307871 = CURVE_STYLE('',#307872,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307872 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307873 = STYLED_ITEM('color',(#307874),#50243); +#307874 = PRESENTATION_STYLE_ASSIGNMENT((#307875,#307880)); +#307875 = SURFACE_STYLE_USAGE(.BOTH.,#307876); +#307876 = SURFACE_SIDE_STYLE('',(#307877)); +#307877 = SURFACE_STYLE_FILL_AREA(#307878); +#307878 = FILL_AREA_STYLE('',(#307879)); +#307879 = FILL_AREA_STYLE_COLOUR('',#279624); +#307880 = CURVE_STYLE('',#307881,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307881 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307882 = OVER_RIDING_STYLED_ITEM('overriding color',(#307883),#50248, + #307873); +#307883 = PRESENTATION_STYLE_ASSIGNMENT((#307884,#307889)); +#307884 = SURFACE_STYLE_USAGE(.BOTH.,#307885); +#307885 = SURFACE_SIDE_STYLE('',(#307886)); +#307886 = SURFACE_STYLE_FILL_AREA(#307887); +#307887 = FILL_AREA_STYLE('',(#307888)); +#307888 = FILL_AREA_STYLE_COLOUR('',#280691); +#307889 = CURVE_STYLE('',#307890,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307891 = STYLED_ITEM('color',(#307892),#50260); +#307892 = PRESENTATION_STYLE_ASSIGNMENT((#307893,#307898)); +#307893 = SURFACE_STYLE_USAGE(.BOTH.,#307894); +#307894 = SURFACE_SIDE_STYLE('',(#307895)); +#307895 = SURFACE_STYLE_FILL_AREA(#307896); +#307896 = FILL_AREA_STYLE('',(#307897)); +#307897 = FILL_AREA_STYLE_COLOUR('',#280691); +#307898 = CURVE_STYLE('',#307899,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307899 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307900 = STYLED_ITEM('color',(#307901),#50309); +#307901 = PRESENTATION_STYLE_ASSIGNMENT((#307902,#307907)); +#307902 = SURFACE_STYLE_USAGE(.BOTH.,#307903); +#307903 = SURFACE_SIDE_STYLE('',(#307904)); +#307904 = SURFACE_STYLE_FILL_AREA(#307905); +#307905 = FILL_AREA_STYLE('',(#307906)); +#307906 = FILL_AREA_STYLE_COLOUR('',#280691); +#307907 = CURVE_STYLE('',#307908,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307908 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307909 = STYLED_ITEM('color',(#307910),#50333); +#307910 = PRESENTATION_STYLE_ASSIGNMENT((#307911,#307916)); +#307911 = SURFACE_STYLE_USAGE(.BOTH.,#307912); +#307912 = SURFACE_SIDE_STYLE('',(#307913)); +#307913 = SURFACE_STYLE_FILL_AREA(#307914); +#307914 = FILL_AREA_STYLE('',(#307915)); +#307915 = FILL_AREA_STYLE_COLOUR('',#280691); +#307916 = CURVE_STYLE('',#307917,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307917 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307918 = STYLED_ITEM('color',(#307919),#50375); +#307919 = PRESENTATION_STYLE_ASSIGNMENT((#307920,#307925)); +#307920 = SURFACE_STYLE_USAGE(.BOTH.,#307921); +#307921 = SURFACE_SIDE_STYLE('',(#307922)); +#307922 = SURFACE_STYLE_FILL_AREA(#307923); +#307923 = FILL_AREA_STYLE('',(#307924)); +#307924 = FILL_AREA_STYLE_COLOUR('',#280691); +#307925 = CURVE_STYLE('',#307926,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307926 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307927 = STYLED_ITEM('color',(#307928),#50392); +#307928 = PRESENTATION_STYLE_ASSIGNMENT((#307929,#307934)); +#307929 = SURFACE_STYLE_USAGE(.BOTH.,#307930); +#307930 = SURFACE_SIDE_STYLE('',(#307931)); +#307931 = SURFACE_STYLE_FILL_AREA(#307932); +#307932 = FILL_AREA_STYLE('',(#307933)); +#307933 = FILL_AREA_STYLE_COLOUR('',#279624); +#307934 = CURVE_STYLE('',#307935,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307935 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307936 = OVER_RIDING_STYLED_ITEM('overriding color',(#307937),#50399, + #307927); +#307937 = PRESENTATION_STYLE_ASSIGNMENT((#307938,#307943)); +#307938 = SURFACE_STYLE_USAGE(.BOTH.,#307939); +#307939 = SURFACE_SIDE_STYLE('',(#307940)); +#307940 = SURFACE_STYLE_FILL_AREA(#307941); +#307941 = FILL_AREA_STYLE('',(#307942)); +#307942 = FILL_AREA_STYLE_COLOUR('',#280691); +#307943 = CURVE_STYLE('',#307944,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307944 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307945 = STYLED_ITEM('color',(#307946),#50409); +#307946 = PRESENTATION_STYLE_ASSIGNMENT((#307947,#307952)); +#307947 = SURFACE_STYLE_USAGE(.BOTH.,#307948); +#307948 = SURFACE_SIDE_STYLE('',(#307949)); +#307949 = SURFACE_STYLE_FILL_AREA(#307950); +#307950 = FILL_AREA_STYLE('',(#307951)); +#307951 = FILL_AREA_STYLE_COLOUR('',#279624); +#307952 = CURVE_STYLE('',#307953,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#307953 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307954 = OVER_RIDING_STYLED_ITEM('overriding color',(#307955),#50414, + #307945); +#307955 = PRESENTATION_STYLE_ASSIGNMENT((#307956,#307961)); +#307956 = SURFACE_STYLE_USAGE(.BOTH.,#307957); +#307957 = SURFACE_SIDE_STYLE('',(#307958)); +#307958 = SURFACE_STYLE_FILL_AREA(#307959); +#307959 = FILL_AREA_STYLE('',(#307960)); +#307960 = FILL_AREA_STYLE_COLOUR('',#280691); +#307961 = CURVE_STYLE('',#307962,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307962 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307963 = STYLED_ITEM('color',(#307964),#50426); +#307964 = PRESENTATION_STYLE_ASSIGNMENT((#307965,#307970)); +#307965 = SURFACE_STYLE_USAGE(.BOTH.,#307966); +#307966 = SURFACE_SIDE_STYLE('',(#307967)); +#307967 = SURFACE_STYLE_FILL_AREA(#307968); +#307968 = FILL_AREA_STYLE('',(#307969)); +#307969 = FILL_AREA_STYLE_COLOUR('',#280691); +#307970 = CURVE_STYLE('',#307971,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307971 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307972 = STYLED_ITEM('color',(#307973),#50475); +#307973 = PRESENTATION_STYLE_ASSIGNMENT((#307974,#307979)); +#307974 = SURFACE_STYLE_USAGE(.BOTH.,#307975); +#307975 = SURFACE_SIDE_STYLE('',(#307976)); +#307976 = SURFACE_STYLE_FILL_AREA(#307977); +#307977 = FILL_AREA_STYLE('',(#307978)); +#307978 = FILL_AREA_STYLE_COLOUR('',#280691); +#307979 = CURVE_STYLE('',#307980,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307980 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307981 = STYLED_ITEM('color',(#307982),#50499); +#307982 = PRESENTATION_STYLE_ASSIGNMENT((#307983,#307988)); +#307983 = SURFACE_STYLE_USAGE(.BOTH.,#307984); +#307984 = SURFACE_SIDE_STYLE('',(#307985)); +#307985 = SURFACE_STYLE_FILL_AREA(#307986); +#307986 = FILL_AREA_STYLE('',(#307987)); +#307987 = FILL_AREA_STYLE_COLOUR('',#280691); +#307988 = CURVE_STYLE('',#307989,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307989 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307990 = STYLED_ITEM('color',(#307991),#50541); +#307991 = PRESENTATION_STYLE_ASSIGNMENT((#307992,#307997)); +#307992 = SURFACE_STYLE_USAGE(.BOTH.,#307993); +#307993 = SURFACE_SIDE_STYLE('',(#307994)); +#307994 = SURFACE_STYLE_FILL_AREA(#307995); +#307995 = FILL_AREA_STYLE('',(#307996)); +#307996 = FILL_AREA_STYLE_COLOUR('',#280691); +#307997 = CURVE_STYLE('',#307998,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#307998 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307999 = STYLED_ITEM('color',(#308000),#50558); +#308000 = PRESENTATION_STYLE_ASSIGNMENT((#308001,#308006)); +#308001 = SURFACE_STYLE_USAGE(.BOTH.,#308002); +#308002 = SURFACE_SIDE_STYLE('',(#308003)); +#308003 = SURFACE_STYLE_FILL_AREA(#308004); +#308004 = FILL_AREA_STYLE('',(#308005)); +#308005 = FILL_AREA_STYLE_COLOUR('',#279624); +#308006 = CURVE_STYLE('',#308007,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308007 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308008 = OVER_RIDING_STYLED_ITEM('overriding color',(#308009),#50565, + #307999); +#308009 = PRESENTATION_STYLE_ASSIGNMENT((#308010,#308015)); +#308010 = SURFACE_STYLE_USAGE(.BOTH.,#308011); +#308011 = SURFACE_SIDE_STYLE('',(#308012)); +#308012 = SURFACE_STYLE_FILL_AREA(#308013); +#308013 = FILL_AREA_STYLE('',(#308014)); +#308014 = FILL_AREA_STYLE_COLOUR('',#280691); +#308015 = CURVE_STYLE('',#308016,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308016 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308017 = STYLED_ITEM('color',(#308018),#50575); +#308018 = PRESENTATION_STYLE_ASSIGNMENT((#308019,#308024)); +#308019 = SURFACE_STYLE_USAGE(.BOTH.,#308020); +#308020 = SURFACE_SIDE_STYLE('',(#308021)); +#308021 = SURFACE_STYLE_FILL_AREA(#308022); +#308022 = FILL_AREA_STYLE('',(#308023)); +#308023 = FILL_AREA_STYLE_COLOUR('',#279624); +#308024 = CURVE_STYLE('',#308025,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308025 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308026 = OVER_RIDING_STYLED_ITEM('overriding color',(#308027),#50580, + #308017); +#308027 = PRESENTATION_STYLE_ASSIGNMENT((#308028,#308033)); +#308028 = SURFACE_STYLE_USAGE(.BOTH.,#308029); +#308029 = SURFACE_SIDE_STYLE('',(#308030)); +#308030 = SURFACE_STYLE_FILL_AREA(#308031); +#308031 = FILL_AREA_STYLE('',(#308032)); +#308032 = FILL_AREA_STYLE_COLOUR('',#280691); +#308033 = CURVE_STYLE('',#308034,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308034 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308035 = STYLED_ITEM('color',(#308036),#50592); +#308036 = PRESENTATION_STYLE_ASSIGNMENT((#308037,#308042)); +#308037 = SURFACE_STYLE_USAGE(.BOTH.,#308038); +#308038 = SURFACE_SIDE_STYLE('',(#308039)); +#308039 = SURFACE_STYLE_FILL_AREA(#308040); +#308040 = FILL_AREA_STYLE('',(#308041)); +#308041 = FILL_AREA_STYLE_COLOUR('',#280691); +#308042 = CURVE_STYLE('',#308043,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308043 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308044 = STYLED_ITEM('color',(#308045),#50641); +#308045 = PRESENTATION_STYLE_ASSIGNMENT((#308046,#308051)); +#308046 = SURFACE_STYLE_USAGE(.BOTH.,#308047); +#308047 = SURFACE_SIDE_STYLE('',(#308048)); +#308048 = SURFACE_STYLE_FILL_AREA(#308049); +#308049 = FILL_AREA_STYLE('',(#308050)); +#308050 = FILL_AREA_STYLE_COLOUR('',#280691); +#308051 = CURVE_STYLE('',#308052,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308052 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308053 = STYLED_ITEM('color',(#308054),#50665); +#308054 = PRESENTATION_STYLE_ASSIGNMENT((#308055,#308060)); +#308055 = SURFACE_STYLE_USAGE(.BOTH.,#308056); +#308056 = SURFACE_SIDE_STYLE('',(#308057)); +#308057 = SURFACE_STYLE_FILL_AREA(#308058); +#308058 = FILL_AREA_STYLE('',(#308059)); +#308059 = FILL_AREA_STYLE_COLOUR('',#280691); +#308060 = CURVE_STYLE('',#308061,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308061 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308062 = STYLED_ITEM('color',(#308063),#50707); +#308063 = PRESENTATION_STYLE_ASSIGNMENT((#308064,#308069)); +#308064 = SURFACE_STYLE_USAGE(.BOTH.,#308065); +#308065 = SURFACE_SIDE_STYLE('',(#308066)); +#308066 = SURFACE_STYLE_FILL_AREA(#308067); +#308067 = FILL_AREA_STYLE('',(#308068)); +#308068 = FILL_AREA_STYLE_COLOUR('',#280691); +#308069 = CURVE_STYLE('',#308070,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308071 = STYLED_ITEM('color',(#308072),#50724); +#308072 = PRESENTATION_STYLE_ASSIGNMENT((#308073,#308078)); +#308073 = SURFACE_STYLE_USAGE(.BOTH.,#308074); +#308074 = SURFACE_SIDE_STYLE('',(#308075)); +#308075 = SURFACE_STYLE_FILL_AREA(#308076); +#308076 = FILL_AREA_STYLE('',(#308077)); +#308077 = FILL_AREA_STYLE_COLOUR('',#279624); +#308078 = CURVE_STYLE('',#308079,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308079 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308080 = OVER_RIDING_STYLED_ITEM('overriding color',(#308081),#50731, + #308071); +#308081 = PRESENTATION_STYLE_ASSIGNMENT((#308082,#308087)); +#308082 = SURFACE_STYLE_USAGE(.BOTH.,#308083); +#308083 = SURFACE_SIDE_STYLE('',(#308084)); +#308084 = SURFACE_STYLE_FILL_AREA(#308085); +#308085 = FILL_AREA_STYLE('',(#308086)); +#308086 = FILL_AREA_STYLE_COLOUR('',#280691); +#308087 = CURVE_STYLE('',#308088,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308089 = STYLED_ITEM('color',(#308090),#50741); +#308090 = PRESENTATION_STYLE_ASSIGNMENT((#308091,#308096)); +#308091 = SURFACE_STYLE_USAGE(.BOTH.,#308092); +#308092 = SURFACE_SIDE_STYLE('',(#308093)); +#308093 = SURFACE_STYLE_FILL_AREA(#308094); +#308094 = FILL_AREA_STYLE('',(#308095)); +#308095 = FILL_AREA_STYLE_COLOUR('',#279624); +#308096 = CURVE_STYLE('',#308097,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308098 = OVER_RIDING_STYLED_ITEM('overriding color',(#308099),#50746, + #308089); +#308099 = PRESENTATION_STYLE_ASSIGNMENT((#308100,#308105)); +#308100 = SURFACE_STYLE_USAGE(.BOTH.,#308101); +#308101 = SURFACE_SIDE_STYLE('',(#308102)); +#308102 = SURFACE_STYLE_FILL_AREA(#308103); +#308103 = FILL_AREA_STYLE('',(#308104)); +#308104 = FILL_AREA_STYLE_COLOUR('',#280691); +#308105 = CURVE_STYLE('',#308106,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308107 = STYLED_ITEM('color',(#308108),#50758); +#308108 = PRESENTATION_STYLE_ASSIGNMENT((#308109,#308114)); +#308109 = SURFACE_STYLE_USAGE(.BOTH.,#308110); +#308110 = SURFACE_SIDE_STYLE('',(#308111)); +#308111 = SURFACE_STYLE_FILL_AREA(#308112); +#308112 = FILL_AREA_STYLE('',(#308113)); +#308113 = FILL_AREA_STYLE_COLOUR('',#280691); +#308114 = CURVE_STYLE('',#308115,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308116 = STYLED_ITEM('color',(#308117),#50807); +#308117 = PRESENTATION_STYLE_ASSIGNMENT((#308118,#308123)); +#308118 = SURFACE_STYLE_USAGE(.BOTH.,#308119); +#308119 = SURFACE_SIDE_STYLE('',(#308120)); +#308120 = SURFACE_STYLE_FILL_AREA(#308121); +#308121 = FILL_AREA_STYLE('',(#308122)); +#308122 = FILL_AREA_STYLE_COLOUR('',#280691); +#308123 = CURVE_STYLE('',#308124,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308125 = STYLED_ITEM('color',(#308126),#50831); +#308126 = PRESENTATION_STYLE_ASSIGNMENT((#308127,#308132)); +#308127 = SURFACE_STYLE_USAGE(.BOTH.,#308128); +#308128 = SURFACE_SIDE_STYLE('',(#308129)); +#308129 = SURFACE_STYLE_FILL_AREA(#308130); +#308130 = FILL_AREA_STYLE('',(#308131)); +#308131 = FILL_AREA_STYLE_COLOUR('',#280691); +#308132 = CURVE_STYLE('',#308133,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308134 = STYLED_ITEM('color',(#308135),#50873); +#308135 = PRESENTATION_STYLE_ASSIGNMENT((#308136,#308141)); +#308136 = SURFACE_STYLE_USAGE(.BOTH.,#308137); +#308137 = SURFACE_SIDE_STYLE('',(#308138)); +#308138 = SURFACE_STYLE_FILL_AREA(#308139); +#308139 = FILL_AREA_STYLE('',(#308140)); +#308140 = FILL_AREA_STYLE_COLOUR('',#280691); +#308141 = CURVE_STYLE('',#308142,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308143 = STYLED_ITEM('color',(#308144),#50890); +#308144 = PRESENTATION_STYLE_ASSIGNMENT((#308145,#308150)); +#308145 = SURFACE_STYLE_USAGE(.BOTH.,#308146); +#308146 = SURFACE_SIDE_STYLE('',(#308147)); +#308147 = SURFACE_STYLE_FILL_AREA(#308148); +#308148 = FILL_AREA_STYLE('',(#308149)); +#308149 = FILL_AREA_STYLE_COLOUR('',#279624); +#308150 = CURVE_STYLE('',#308151,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308152 = OVER_RIDING_STYLED_ITEM('overriding color',(#308153),#50897, + #308143); +#308153 = PRESENTATION_STYLE_ASSIGNMENT((#308154,#308159)); +#308154 = SURFACE_STYLE_USAGE(.BOTH.,#308155); +#308155 = SURFACE_SIDE_STYLE('',(#308156)); +#308156 = SURFACE_STYLE_FILL_AREA(#308157); +#308157 = FILL_AREA_STYLE('',(#308158)); +#308158 = FILL_AREA_STYLE_COLOUR('',#280691); +#308159 = CURVE_STYLE('',#308160,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308161 = STYLED_ITEM('color',(#308162),#50907); +#308162 = PRESENTATION_STYLE_ASSIGNMENT((#308163,#308168)); +#308163 = SURFACE_STYLE_USAGE(.BOTH.,#308164); +#308164 = SURFACE_SIDE_STYLE('',(#308165)); +#308165 = SURFACE_STYLE_FILL_AREA(#308166); +#308166 = FILL_AREA_STYLE('',(#308167)); +#308167 = FILL_AREA_STYLE_COLOUR('',#279624); +#308168 = CURVE_STYLE('',#308169,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308170 = OVER_RIDING_STYLED_ITEM('overriding color',(#308171),#50912, + #308161); +#308171 = PRESENTATION_STYLE_ASSIGNMENT((#308172,#308177)); +#308172 = SURFACE_STYLE_USAGE(.BOTH.,#308173); +#308173 = SURFACE_SIDE_STYLE('',(#308174)); +#308174 = SURFACE_STYLE_FILL_AREA(#308175); +#308175 = FILL_AREA_STYLE('',(#308176)); +#308176 = FILL_AREA_STYLE_COLOUR('',#280691); +#308177 = CURVE_STYLE('',#308178,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308179 = STYLED_ITEM('color',(#308180),#50924); +#308180 = PRESENTATION_STYLE_ASSIGNMENT((#308181,#308186)); +#308181 = SURFACE_STYLE_USAGE(.BOTH.,#308182); +#308182 = SURFACE_SIDE_STYLE('',(#308183)); +#308183 = SURFACE_STYLE_FILL_AREA(#308184); +#308184 = FILL_AREA_STYLE('',(#308185)); +#308185 = FILL_AREA_STYLE_COLOUR('',#280691); +#308186 = CURVE_STYLE('',#308187,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308188 = STYLED_ITEM('color',(#308189),#50973); +#308189 = PRESENTATION_STYLE_ASSIGNMENT((#308190,#308195)); +#308190 = SURFACE_STYLE_USAGE(.BOTH.,#308191); +#308191 = SURFACE_SIDE_STYLE('',(#308192)); +#308192 = SURFACE_STYLE_FILL_AREA(#308193); +#308193 = FILL_AREA_STYLE('',(#308194)); +#308194 = FILL_AREA_STYLE_COLOUR('',#280691); +#308195 = CURVE_STYLE('',#308196,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308197 = STYLED_ITEM('color',(#308198),#50997); +#308198 = PRESENTATION_STYLE_ASSIGNMENT((#308199,#308204)); +#308199 = SURFACE_STYLE_USAGE(.BOTH.,#308200); +#308200 = SURFACE_SIDE_STYLE('',(#308201)); +#308201 = SURFACE_STYLE_FILL_AREA(#308202); +#308202 = FILL_AREA_STYLE('',(#308203)); +#308203 = FILL_AREA_STYLE_COLOUR('',#280691); +#308204 = CURVE_STYLE('',#308205,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308206 = STYLED_ITEM('color',(#308207),#51039); +#308207 = PRESENTATION_STYLE_ASSIGNMENT((#308208,#308213)); +#308208 = SURFACE_STYLE_USAGE(.BOTH.,#308209); +#308209 = SURFACE_SIDE_STYLE('',(#308210)); +#308210 = SURFACE_STYLE_FILL_AREA(#308211); +#308211 = FILL_AREA_STYLE('',(#308212)); +#308212 = FILL_AREA_STYLE_COLOUR('',#280691); +#308213 = CURVE_STYLE('',#308214,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308215 = STYLED_ITEM('color',(#308216),#51056); +#308216 = PRESENTATION_STYLE_ASSIGNMENT((#308217,#308222)); +#308217 = SURFACE_STYLE_USAGE(.BOTH.,#308218); +#308218 = SURFACE_SIDE_STYLE('',(#308219)); +#308219 = SURFACE_STYLE_FILL_AREA(#308220); +#308220 = FILL_AREA_STYLE('',(#308221)); +#308221 = FILL_AREA_STYLE_COLOUR('',#279624); +#308222 = CURVE_STYLE('',#308223,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308224 = OVER_RIDING_STYLED_ITEM('overriding color',(#308225),#51063, + #308215); +#308225 = PRESENTATION_STYLE_ASSIGNMENT((#308226,#308231)); +#308226 = SURFACE_STYLE_USAGE(.BOTH.,#308227); +#308227 = SURFACE_SIDE_STYLE('',(#308228)); +#308228 = SURFACE_STYLE_FILL_AREA(#308229); +#308229 = FILL_AREA_STYLE('',(#308230)); +#308230 = FILL_AREA_STYLE_COLOUR('',#280691); +#308231 = CURVE_STYLE('',#308232,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308233 = STYLED_ITEM('color',(#308234),#51073); +#308234 = PRESENTATION_STYLE_ASSIGNMENT((#308235,#308240)); +#308235 = SURFACE_STYLE_USAGE(.BOTH.,#308236); +#308236 = SURFACE_SIDE_STYLE('',(#308237)); +#308237 = SURFACE_STYLE_FILL_AREA(#308238); +#308238 = FILL_AREA_STYLE('',(#308239)); +#308239 = FILL_AREA_STYLE_COLOUR('',#279624); +#308240 = CURVE_STYLE('',#308241,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#308241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308242 = OVER_RIDING_STYLED_ITEM('overriding color',(#308243),#51078, + #308233); +#308243 = PRESENTATION_STYLE_ASSIGNMENT((#308244,#308249)); +#308244 = SURFACE_STYLE_USAGE(.BOTH.,#308245); +#308245 = SURFACE_SIDE_STYLE('',(#308246)); +#308246 = SURFACE_STYLE_FILL_AREA(#308247); +#308247 = FILL_AREA_STYLE('',(#308248)); +#308248 = FILL_AREA_STYLE_COLOUR('',#280691); +#308249 = CURVE_STYLE('',#308250,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308251 = STYLED_ITEM('color',(#308252),#51090); +#308252 = PRESENTATION_STYLE_ASSIGNMENT((#308253,#308258)); +#308253 = SURFACE_STYLE_USAGE(.BOTH.,#308254); +#308254 = SURFACE_SIDE_STYLE('',(#308255)); +#308255 = SURFACE_STYLE_FILL_AREA(#308256); +#308256 = FILL_AREA_STYLE('',(#308257)); +#308257 = FILL_AREA_STYLE_COLOUR('',#280691); +#308258 = CURVE_STYLE('',#308259,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308260 = STYLED_ITEM('color',(#308261),#51139); +#308261 = PRESENTATION_STYLE_ASSIGNMENT((#308262,#308267)); +#308262 = SURFACE_STYLE_USAGE(.BOTH.,#308263); +#308263 = SURFACE_SIDE_STYLE('',(#308264)); +#308264 = SURFACE_STYLE_FILL_AREA(#308265); +#308265 = FILL_AREA_STYLE('',(#308266)); +#308266 = FILL_AREA_STYLE_COLOUR('',#280691); +#308267 = CURVE_STYLE('',#308268,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308269 = STYLED_ITEM('color',(#308270),#51163); +#308270 = PRESENTATION_STYLE_ASSIGNMENT((#308271,#308276)); +#308271 = SURFACE_STYLE_USAGE(.BOTH.,#308272); +#308272 = SURFACE_SIDE_STYLE('',(#308273)); +#308273 = SURFACE_STYLE_FILL_AREA(#308274); +#308274 = FILL_AREA_STYLE('',(#308275)); +#308275 = FILL_AREA_STYLE_COLOUR('',#280691); +#308276 = CURVE_STYLE('',#308277,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308278 = STYLED_ITEM('color',(#308279),#51205); +#308279 = PRESENTATION_STYLE_ASSIGNMENT((#308280,#308285)); +#308280 = SURFACE_STYLE_USAGE(.BOTH.,#308281); +#308281 = SURFACE_SIDE_STYLE('',(#308282)); +#308282 = SURFACE_STYLE_FILL_AREA(#308283); +#308283 = FILL_AREA_STYLE('',(#308284)); +#308284 = FILL_AREA_STYLE_COLOUR('',#280691); +#308285 = CURVE_STYLE('',#308286,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308287 = STYLED_ITEM('color',(#308288),#51222); +#308288 = PRESENTATION_STYLE_ASSIGNMENT((#308289,#308294)); +#308289 = SURFACE_STYLE_USAGE(.BOTH.,#308290); +#308290 = SURFACE_SIDE_STYLE('',(#308291)); +#308291 = SURFACE_STYLE_FILL_AREA(#308292); +#308292 = FILL_AREA_STYLE('',(#308293)); +#308293 = FILL_AREA_STYLE_COLOUR('',#280691); +#308294 = CURVE_STYLE('',#308295,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308296 = STYLED_ITEM('color',(#308297),#51239); +#308297 = PRESENTATION_STYLE_ASSIGNMENT((#308298,#308303)); +#308298 = SURFACE_STYLE_USAGE(.BOTH.,#308299); +#308299 = SURFACE_SIDE_STYLE('',(#308300)); +#308300 = SURFACE_STYLE_FILL_AREA(#308301); +#308301 = FILL_AREA_STYLE('',(#308302)); +#308302 = FILL_AREA_STYLE_COLOUR('',#280691); +#308303 = CURVE_STYLE('',#308304,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308305 = STYLED_ITEM('color',(#308306),#51256); +#308306 = PRESENTATION_STYLE_ASSIGNMENT((#308307,#308312)); +#308307 = SURFACE_STYLE_USAGE(.BOTH.,#308308); +#308308 = SURFACE_SIDE_STYLE('',(#308309)); +#308309 = SURFACE_STYLE_FILL_AREA(#308310); +#308310 = FILL_AREA_STYLE('',(#308311)); +#308311 = FILL_AREA_STYLE_COLOUR('',#280691); +#308312 = CURVE_STYLE('',#308313,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308314 = STYLED_ITEM('color',(#308315),#51268); +#308315 = PRESENTATION_STYLE_ASSIGNMENT((#308316,#308321)); +#308316 = SURFACE_STYLE_USAGE(.BOTH.,#308317); +#308317 = SURFACE_SIDE_STYLE('',(#308318)); +#308318 = SURFACE_STYLE_FILL_AREA(#308319); +#308319 = FILL_AREA_STYLE('',(#308320)); +#308320 = FILL_AREA_STYLE_COLOUR('',#280691); +#308321 = CURVE_STYLE('',#308322,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308323 = STYLED_ITEM('color',(#308324),#51285); +#308324 = PRESENTATION_STYLE_ASSIGNMENT((#308325,#308330)); +#308325 = SURFACE_STYLE_USAGE(.BOTH.,#308326); +#308326 = SURFACE_SIDE_STYLE('',(#308327)); +#308327 = SURFACE_STYLE_FILL_AREA(#308328); +#308328 = FILL_AREA_STYLE('',(#308329)); +#308329 = FILL_AREA_STYLE_COLOUR('',#280691); +#308330 = CURVE_STYLE('',#308331,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308332 = STYLED_ITEM('color',(#308333),#51302); +#308333 = PRESENTATION_STYLE_ASSIGNMENT((#308334,#308339)); +#308334 = SURFACE_STYLE_USAGE(.BOTH.,#308335); +#308335 = SURFACE_SIDE_STYLE('',(#308336)); +#308336 = SURFACE_STYLE_FILL_AREA(#308337); +#308337 = FILL_AREA_STYLE('',(#308338)); +#308338 = FILL_AREA_STYLE_COLOUR('',#280691); +#308339 = CURVE_STYLE('',#308340,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308341 = STYLED_ITEM('color',(#308342),#51314); +#308342 = PRESENTATION_STYLE_ASSIGNMENT((#308343,#308348)); +#308343 = SURFACE_STYLE_USAGE(.BOTH.,#308344); +#308344 = SURFACE_SIDE_STYLE('',(#308345)); +#308345 = SURFACE_STYLE_FILL_AREA(#308346); +#308346 = FILL_AREA_STYLE('',(#308347)); +#308347 = FILL_AREA_STYLE_COLOUR('',#280691); +#308348 = CURVE_STYLE('',#308349,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308350 = STYLED_ITEM('color',(#308351),#51331); +#308351 = PRESENTATION_STYLE_ASSIGNMENT((#308352,#308357)); +#308352 = SURFACE_STYLE_USAGE(.BOTH.,#308353); +#308353 = SURFACE_SIDE_STYLE('',(#308354)); +#308354 = SURFACE_STYLE_FILL_AREA(#308355); +#308355 = FILL_AREA_STYLE('',(#308356)); +#308356 = FILL_AREA_STYLE_COLOUR('',#280691); +#308357 = CURVE_STYLE('',#308358,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308359 = STYLED_ITEM('color',(#308360),#51348); +#308360 = PRESENTATION_STYLE_ASSIGNMENT((#308361,#308366)); +#308361 = SURFACE_STYLE_USAGE(.BOTH.,#308362); +#308362 = SURFACE_SIDE_STYLE('',(#308363)); +#308363 = SURFACE_STYLE_FILL_AREA(#308364); +#308364 = FILL_AREA_STYLE('',(#308365)); +#308365 = FILL_AREA_STYLE_COLOUR('',#280691); +#308366 = CURVE_STYLE('',#308367,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308368 = STYLED_ITEM('color',(#308369),#51360); +#308369 = PRESENTATION_STYLE_ASSIGNMENT((#308370,#308375)); +#308370 = SURFACE_STYLE_USAGE(.BOTH.,#308371); +#308371 = SURFACE_SIDE_STYLE('',(#308372)); +#308372 = SURFACE_STYLE_FILL_AREA(#308373); +#308373 = FILL_AREA_STYLE('',(#308374)); +#308374 = FILL_AREA_STYLE_COLOUR('',#280691); +#308375 = CURVE_STYLE('',#308376,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308377 = STYLED_ITEM('color',(#308378),#51377); +#308378 = PRESENTATION_STYLE_ASSIGNMENT((#308379,#308384)); +#308379 = SURFACE_STYLE_USAGE(.BOTH.,#308380); +#308380 = SURFACE_SIDE_STYLE('',(#308381)); +#308381 = SURFACE_STYLE_FILL_AREA(#308382); +#308382 = FILL_AREA_STYLE('',(#308383)); +#308383 = FILL_AREA_STYLE_COLOUR('',#280691); +#308384 = CURVE_STYLE('',#308385,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308386 = STYLED_ITEM('color',(#308387),#51394); +#308387 = PRESENTATION_STYLE_ASSIGNMENT((#308388,#308393)); +#308388 = SURFACE_STYLE_USAGE(.BOTH.,#308389); +#308389 = SURFACE_SIDE_STYLE('',(#308390)); +#308390 = SURFACE_STYLE_FILL_AREA(#308391); +#308391 = FILL_AREA_STYLE('',(#308392)); +#308392 = FILL_AREA_STYLE_COLOUR('',#280691); +#308393 = CURVE_STYLE('',#308394,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308395 = STYLED_ITEM('color',(#308396),#51406); +#308396 = PRESENTATION_STYLE_ASSIGNMENT((#308397,#308402)); +#308397 = SURFACE_STYLE_USAGE(.BOTH.,#308398); +#308398 = SURFACE_SIDE_STYLE('',(#308399)); +#308399 = SURFACE_STYLE_FILL_AREA(#308400); +#308400 = FILL_AREA_STYLE('',(#308401)); +#308401 = FILL_AREA_STYLE_COLOUR('',#280691); +#308402 = CURVE_STYLE('',#308403,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308404 = STYLED_ITEM('color',(#308405),#51423); +#308405 = PRESENTATION_STYLE_ASSIGNMENT((#308406,#308411)); +#308406 = SURFACE_STYLE_USAGE(.BOTH.,#308407); +#308407 = SURFACE_SIDE_STYLE('',(#308408)); +#308408 = SURFACE_STYLE_FILL_AREA(#308409); +#308409 = FILL_AREA_STYLE('',(#308410)); +#308410 = FILL_AREA_STYLE_COLOUR('',#280691); +#308411 = CURVE_STYLE('',#308412,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308413 = STYLED_ITEM('color',(#308414),#51440); +#308414 = PRESENTATION_STYLE_ASSIGNMENT((#308415,#308420)); +#308415 = SURFACE_STYLE_USAGE(.BOTH.,#308416); +#308416 = SURFACE_SIDE_STYLE('',(#308417)); +#308417 = SURFACE_STYLE_FILL_AREA(#308418); +#308418 = FILL_AREA_STYLE('',(#308419)); +#308419 = FILL_AREA_STYLE_COLOUR('',#280691); +#308420 = CURVE_STYLE('',#308421,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308422 = STYLED_ITEM('color',(#308423),#51452); +#308423 = PRESENTATION_STYLE_ASSIGNMENT((#308424,#308429)); +#308424 = SURFACE_STYLE_USAGE(.BOTH.,#308425); +#308425 = SURFACE_SIDE_STYLE('',(#308426)); +#308426 = SURFACE_STYLE_FILL_AREA(#308427); +#308427 = FILL_AREA_STYLE('',(#308428)); +#308428 = FILL_AREA_STYLE_COLOUR('',#280691); +#308429 = CURVE_STYLE('',#308430,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308431 = STYLED_ITEM('color',(#308432),#51469); +#308432 = PRESENTATION_STYLE_ASSIGNMENT((#308433,#308438)); +#308433 = SURFACE_STYLE_USAGE(.BOTH.,#308434); +#308434 = SURFACE_SIDE_STYLE('',(#308435)); +#308435 = SURFACE_STYLE_FILL_AREA(#308436); +#308436 = FILL_AREA_STYLE('',(#308437)); +#308437 = FILL_AREA_STYLE_COLOUR('',#280691); +#308438 = CURVE_STYLE('',#308439,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308440 = STYLED_ITEM('color',(#308441),#51486); +#308441 = PRESENTATION_STYLE_ASSIGNMENT((#308442,#308447)); +#308442 = SURFACE_STYLE_USAGE(.BOTH.,#308443); +#308443 = SURFACE_SIDE_STYLE('',(#308444)); +#308444 = SURFACE_STYLE_FILL_AREA(#308445); +#308445 = FILL_AREA_STYLE('',(#308446)); +#308446 = FILL_AREA_STYLE_COLOUR('',#280691); +#308447 = CURVE_STYLE('',#308448,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308449 = STYLED_ITEM('color',(#308450),#51498); +#308450 = PRESENTATION_STYLE_ASSIGNMENT((#308451,#308456)); +#308451 = SURFACE_STYLE_USAGE(.BOTH.,#308452); +#308452 = SURFACE_SIDE_STYLE('',(#308453)); +#308453 = SURFACE_STYLE_FILL_AREA(#308454); +#308454 = FILL_AREA_STYLE('',(#308455)); +#308455 = FILL_AREA_STYLE_COLOUR('',#280691); +#308456 = CURVE_STYLE('',#308457,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308458 = STYLED_ITEM('color',(#308459),#51515); +#308459 = PRESENTATION_STYLE_ASSIGNMENT((#308460,#308465)); +#308460 = SURFACE_STYLE_USAGE(.BOTH.,#308461); +#308461 = SURFACE_SIDE_STYLE('',(#308462)); +#308462 = SURFACE_STYLE_FILL_AREA(#308463); +#308463 = FILL_AREA_STYLE('',(#308464)); +#308464 = FILL_AREA_STYLE_COLOUR('',#280691); +#308465 = CURVE_STYLE('',#308466,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308467 = STYLED_ITEM('color',(#308468),#51532); +#308468 = PRESENTATION_STYLE_ASSIGNMENT((#308469,#308474)); +#308469 = SURFACE_STYLE_USAGE(.BOTH.,#308470); +#308470 = SURFACE_SIDE_STYLE('',(#308471)); +#308471 = SURFACE_STYLE_FILL_AREA(#308472); +#308472 = FILL_AREA_STYLE('',(#308473)); +#308473 = FILL_AREA_STYLE_COLOUR('',#280691); +#308474 = CURVE_STYLE('',#308475,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308476 = STYLED_ITEM('color',(#308477),#51544); +#308477 = PRESENTATION_STYLE_ASSIGNMENT((#308478,#308483)); +#308478 = SURFACE_STYLE_USAGE(.BOTH.,#308479); +#308479 = SURFACE_SIDE_STYLE('',(#308480)); +#308480 = SURFACE_STYLE_FILL_AREA(#308481); +#308481 = FILL_AREA_STYLE('',(#308482)); +#308482 = FILL_AREA_STYLE_COLOUR('',#280691); +#308483 = CURVE_STYLE('',#308484,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308485 = STYLED_ITEM('color',(#308486),#51561); +#308486 = PRESENTATION_STYLE_ASSIGNMENT((#308487,#308492)); +#308487 = SURFACE_STYLE_USAGE(.BOTH.,#308488); +#308488 = SURFACE_SIDE_STYLE('',(#308489)); +#308489 = SURFACE_STYLE_FILL_AREA(#308490); +#308490 = FILL_AREA_STYLE('',(#308491)); +#308491 = FILL_AREA_STYLE_COLOUR('',#280691); +#308492 = CURVE_STYLE('',#308493,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308494 = STYLED_ITEM('color',(#308495),#51578); +#308495 = PRESENTATION_STYLE_ASSIGNMENT((#308496,#308501)); +#308496 = SURFACE_STYLE_USAGE(.BOTH.,#308497); +#308497 = SURFACE_SIDE_STYLE('',(#308498)); +#308498 = SURFACE_STYLE_FILL_AREA(#308499); +#308499 = FILL_AREA_STYLE('',(#308500)); +#308500 = FILL_AREA_STYLE_COLOUR('',#280691); +#308501 = CURVE_STYLE('',#308502,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308503 = STYLED_ITEM('color',(#308504),#51590); +#308504 = PRESENTATION_STYLE_ASSIGNMENT((#308505,#308510)); +#308505 = SURFACE_STYLE_USAGE(.BOTH.,#308506); +#308506 = SURFACE_SIDE_STYLE('',(#308507)); +#308507 = SURFACE_STYLE_FILL_AREA(#308508); +#308508 = FILL_AREA_STYLE('',(#308509)); +#308509 = FILL_AREA_STYLE_COLOUR('',#280691); +#308510 = CURVE_STYLE('',#308511,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308512 = STYLED_ITEM('color',(#308513),#51607); +#308513 = PRESENTATION_STYLE_ASSIGNMENT((#308514,#308519)); +#308514 = SURFACE_STYLE_USAGE(.BOTH.,#308515); +#308515 = SURFACE_SIDE_STYLE('',(#308516)); +#308516 = SURFACE_STYLE_FILL_AREA(#308517); +#308517 = FILL_AREA_STYLE('',(#308518)); +#308518 = FILL_AREA_STYLE_COLOUR('',#280691); +#308519 = CURVE_STYLE('',#308520,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308521 = STYLED_ITEM('color',(#308522),#51624); +#308522 = PRESENTATION_STYLE_ASSIGNMENT((#308523,#308528)); +#308523 = SURFACE_STYLE_USAGE(.BOTH.,#308524); +#308524 = SURFACE_SIDE_STYLE('',(#308525)); +#308525 = SURFACE_STYLE_FILL_AREA(#308526); +#308526 = FILL_AREA_STYLE('',(#308527)); +#308527 = FILL_AREA_STYLE_COLOUR('',#280691); +#308528 = CURVE_STYLE('',#308529,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308530 = STYLED_ITEM('color',(#308531),#51636); +#308531 = PRESENTATION_STYLE_ASSIGNMENT((#308532,#308537)); +#308532 = SURFACE_STYLE_USAGE(.BOTH.,#308533); +#308533 = SURFACE_SIDE_STYLE('',(#308534)); +#308534 = SURFACE_STYLE_FILL_AREA(#308535); +#308535 = FILL_AREA_STYLE('',(#308536)); +#308536 = FILL_AREA_STYLE_COLOUR('',#280691); +#308537 = CURVE_STYLE('',#308538,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308539 = STYLED_ITEM('color',(#308540),#51653); +#308540 = PRESENTATION_STYLE_ASSIGNMENT((#308541,#308546)); +#308541 = SURFACE_STYLE_USAGE(.BOTH.,#308542); +#308542 = SURFACE_SIDE_STYLE('',(#308543)); +#308543 = SURFACE_STYLE_FILL_AREA(#308544); +#308544 = FILL_AREA_STYLE('',(#308545)); +#308545 = FILL_AREA_STYLE_COLOUR('',#280691); +#308546 = CURVE_STYLE('',#308547,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308548 = STYLED_ITEM('color',(#308549),#51670); +#308549 = PRESENTATION_STYLE_ASSIGNMENT((#308550,#308555)); +#308550 = SURFACE_STYLE_USAGE(.BOTH.,#308551); +#308551 = SURFACE_SIDE_STYLE('',(#308552)); +#308552 = SURFACE_STYLE_FILL_AREA(#308553); +#308553 = FILL_AREA_STYLE('',(#308554)); +#308554 = FILL_AREA_STYLE_COLOUR('',#280691); +#308555 = CURVE_STYLE('',#308556,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#308556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308557 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #308558,#308565,#308572,#308579,#308586,#308593,#308600,#308607, + #308614,#308621,#308628,#308635,#308642,#308649,#308656,#308663, + #308670,#308677,#308684,#308691,#308698,#308705,#308712,#308719, + #308726,#308733),#52519); +#308558 = STYLED_ITEM('color',(#308559),#51731); +#308559 = PRESENTATION_STYLE_ASSIGNMENT((#308560)); +#308560 = SURFACE_STYLE_USAGE(.BOTH.,#308561); +#308561 = SURFACE_SIDE_STYLE('',(#308562)); +#308562 = SURFACE_STYLE_FILL_AREA(#308563); +#308563 = FILL_AREA_STYLE('',(#308564)); +#308564 = FILL_AREA_STYLE_COLOUR('',#282540); +#308565 = STYLED_ITEM('color',(#308566),#51771); +#308566 = PRESENTATION_STYLE_ASSIGNMENT((#308567)); +#308567 = SURFACE_STYLE_USAGE(.BOTH.,#308568); +#308568 = SURFACE_SIDE_STYLE('',(#308569)); +#308569 = SURFACE_STYLE_FILL_AREA(#308570); +#308570 = FILL_AREA_STYLE('',(#308571)); +#308571 = FILL_AREA_STYLE_COLOUR('',#282540); +#308572 = STYLED_ITEM('color',(#308573),#51854); +#308573 = PRESENTATION_STYLE_ASSIGNMENT((#308574)); +#308574 = SURFACE_STYLE_USAGE(.BOTH.,#308575); +#308575 = SURFACE_SIDE_STYLE('',(#308576)); +#308576 = SURFACE_STYLE_FILL_AREA(#308577); +#308577 = FILL_AREA_STYLE('',(#308578)); +#308578 = FILL_AREA_STYLE_COLOUR('',#282540); +#308579 = STYLED_ITEM('color',(#308580),#51879); +#308580 = PRESENTATION_STYLE_ASSIGNMENT((#308581)); +#308581 = SURFACE_STYLE_USAGE(.BOTH.,#308582); +#308582 = SURFACE_SIDE_STYLE('',(#308583)); +#308583 = SURFACE_STYLE_FILL_AREA(#308584); +#308584 = FILL_AREA_STYLE('',(#308585)); +#308585 = FILL_AREA_STYLE_COLOUR('',#282540); +#308586 = STYLED_ITEM('color',(#308587),#51904); +#308587 = PRESENTATION_STYLE_ASSIGNMENT((#308588)); +#308588 = SURFACE_STYLE_USAGE(.BOTH.,#308589); +#308589 = SURFACE_SIDE_STYLE('',(#308590)); +#308590 = SURFACE_STYLE_FILL_AREA(#308591); +#308591 = FILL_AREA_STYLE('',(#308592)); +#308592 = FILL_AREA_STYLE_COLOUR('',#282540); +#308593 = STYLED_ITEM('color',(#308594),#51971); +#308594 = PRESENTATION_STYLE_ASSIGNMENT((#308595)); +#308595 = SURFACE_STYLE_USAGE(.BOTH.,#308596); +#308596 = SURFACE_SIDE_STYLE('',(#308597)); +#308597 = SURFACE_STYLE_FILL_AREA(#308598); +#308598 = FILL_AREA_STYLE('',(#308599)); +#308599 = FILL_AREA_STYLE_COLOUR('',#282540); +#308600 = STYLED_ITEM('color',(#308601),#51988); +#308601 = PRESENTATION_STYLE_ASSIGNMENT((#308602)); +#308602 = SURFACE_STYLE_USAGE(.BOTH.,#308603); +#308603 = SURFACE_SIDE_STYLE('',(#308604)); +#308604 = SURFACE_STYLE_FILL_AREA(#308605); +#308605 = FILL_AREA_STYLE('',(#308606)); +#308606 = FILL_AREA_STYLE_COLOUR('',#282540); +#308607 = STYLED_ITEM('color',(#308608),#52005); +#308608 = PRESENTATION_STYLE_ASSIGNMENT((#308609)); +#308609 = SURFACE_STYLE_USAGE(.BOTH.,#308610); +#308610 = SURFACE_SIDE_STYLE('',(#308611)); +#308611 = SURFACE_STYLE_FILL_AREA(#308612); +#308612 = FILL_AREA_STYLE('',(#308613)); +#308613 = FILL_AREA_STYLE_COLOUR('',#292826); +#308614 = STYLED_ITEM('color',(#308615),#52054); +#308615 = PRESENTATION_STYLE_ASSIGNMENT((#308616)); +#308616 = SURFACE_STYLE_USAGE(.BOTH.,#308617); +#308617 = SURFACE_SIDE_STYLE('',(#308618)); +#308618 = SURFACE_STYLE_FILL_AREA(#308619); +#308619 = FILL_AREA_STYLE('',(#308620)); +#308620 = FILL_AREA_STYLE_COLOUR('',#282540); +#308621 = STYLED_ITEM('color',(#308622),#52071); +#308622 = PRESENTATION_STYLE_ASSIGNMENT((#308623)); +#308623 = SURFACE_STYLE_USAGE(.BOTH.,#308624); +#308624 = SURFACE_SIDE_STYLE('',(#308625)); +#308625 = SURFACE_STYLE_FILL_AREA(#308626); +#308626 = FILL_AREA_STYLE('',(#308627)); +#308627 = FILL_AREA_STYLE_COLOUR('',#282540); +#308628 = STYLED_ITEM('color',(#308629),#52088); +#308629 = PRESENTATION_STYLE_ASSIGNMENT((#308630)); +#308630 = SURFACE_STYLE_USAGE(.BOTH.,#308631); +#308631 = SURFACE_SIDE_STYLE('',(#308632)); +#308632 = SURFACE_STYLE_FILL_AREA(#308633); +#308633 = FILL_AREA_STYLE('',(#308634)); +#308634 = FILL_AREA_STYLE_COLOUR('',#292826); +#308635 = STYLED_ITEM('color',(#308636),#52137); +#308636 = PRESENTATION_STYLE_ASSIGNMENT((#308637)); +#308637 = SURFACE_STYLE_USAGE(.BOTH.,#308638); +#308638 = SURFACE_SIDE_STYLE('',(#308639)); +#308639 = SURFACE_STYLE_FILL_AREA(#308640); +#308640 = FILL_AREA_STYLE('',(#308641)); +#308641 = FILL_AREA_STYLE_COLOUR('',#292826); +#308642 = STYLED_ITEM('color',(#308643),#52154); +#308643 = PRESENTATION_STYLE_ASSIGNMENT((#308644)); +#308644 = SURFACE_STYLE_USAGE(.BOTH.,#308645); +#308645 = SURFACE_SIDE_STYLE('',(#308646)); +#308646 = SURFACE_STYLE_FILL_AREA(#308647); +#308647 = FILL_AREA_STYLE('',(#308648)); +#308648 = FILL_AREA_STYLE_COLOUR('',#282540); +#308649 = STYLED_ITEM('color',(#308650),#52223); +#308650 = PRESENTATION_STYLE_ASSIGNMENT((#308651)); +#308651 = SURFACE_STYLE_USAGE(.BOTH.,#308652); +#308652 = SURFACE_SIDE_STYLE('',(#308653)); +#308653 = SURFACE_STYLE_FILL_AREA(#308654); +#308654 = FILL_AREA_STYLE('',(#308655)); +#308655 = FILL_AREA_STYLE_COLOUR('',#303862); +#308656 = STYLED_ITEM('color',(#308657),#52254); +#308657 = PRESENTATION_STYLE_ASSIGNMENT((#308658)); +#308658 = SURFACE_STYLE_USAGE(.BOTH.,#308659); +#308659 = SURFACE_SIDE_STYLE('',(#308660)); +#308660 = SURFACE_STYLE_FILL_AREA(#308661); +#308661 = FILL_AREA_STYLE('',(#308662)); +#308662 = FILL_AREA_STYLE_COLOUR('',#303862); +#308663 = STYLED_ITEM('color',(#308664),#52278); +#308664 = PRESENTATION_STYLE_ASSIGNMENT((#308665)); +#308665 = SURFACE_STYLE_USAGE(.BOTH.,#308666); +#308666 = SURFACE_SIDE_STYLE('',(#308667)); +#308667 = SURFACE_STYLE_FILL_AREA(#308668); +#308668 = FILL_AREA_STYLE('',(#308669)); +#308669 = FILL_AREA_STYLE_COLOUR('',#282540); +#308670 = STYLED_ITEM('color',(#308671),#52347); +#308671 = PRESENTATION_STYLE_ASSIGNMENT((#308672)); +#308672 = SURFACE_STYLE_USAGE(.BOTH.,#308673); +#308673 = SURFACE_SIDE_STYLE('',(#308674)); +#308674 = SURFACE_STYLE_FILL_AREA(#308675); +#308675 = FILL_AREA_STYLE('',(#308676)); +#308676 = FILL_AREA_STYLE_COLOUR('',#303862); +#308677 = STYLED_ITEM('color',(#308678),#52371); +#308678 = PRESENTATION_STYLE_ASSIGNMENT((#308679)); +#308679 = SURFACE_STYLE_USAGE(.BOTH.,#308680); +#308680 = SURFACE_SIDE_STYLE('',(#308681)); +#308681 = SURFACE_STYLE_FILL_AREA(#308682); +#308682 = FILL_AREA_STYLE('',(#308683)); +#308683 = FILL_AREA_STYLE_COLOUR('',#282540); +#308684 = STYLED_ITEM('color',(#308685),#52388); +#308685 = PRESENTATION_STYLE_ASSIGNMENT((#308686)); +#308686 = SURFACE_STYLE_USAGE(.BOTH.,#308687); +#308687 = SURFACE_SIDE_STYLE('',(#308688)); +#308688 = SURFACE_STYLE_FILL_AREA(#308689); +#308689 = FILL_AREA_STYLE('',(#308690)); +#308690 = FILL_AREA_STYLE_COLOUR('',#282540); +#308691 = STYLED_ITEM('color',(#308692),#52405); +#308692 = PRESENTATION_STYLE_ASSIGNMENT((#308693)); +#308693 = SURFACE_STYLE_USAGE(.BOTH.,#308694); +#308694 = SURFACE_SIDE_STYLE('',(#308695)); +#308695 = SURFACE_STYLE_FILL_AREA(#308696); +#308696 = FILL_AREA_STYLE('',(#308697)); +#308697 = FILL_AREA_STYLE_COLOUR('',#282540); +#308698 = STYLED_ITEM('color',(#308699),#52422); +#308699 = PRESENTATION_STYLE_ASSIGNMENT((#308700)); +#308700 = SURFACE_STYLE_USAGE(.BOTH.,#308701); +#308701 = SURFACE_SIDE_STYLE('',(#308702)); +#308702 = SURFACE_STYLE_FILL_AREA(#308703); +#308703 = FILL_AREA_STYLE('',(#308704)); +#308704 = FILL_AREA_STYLE_COLOUR('',#282540); +#308705 = STYLED_ITEM('color',(#308706),#52439); +#308706 = PRESENTATION_STYLE_ASSIGNMENT((#308707)); +#308707 = SURFACE_STYLE_USAGE(.BOTH.,#308708); +#308708 = SURFACE_SIDE_STYLE('',(#308709)); +#308709 = SURFACE_STYLE_FILL_AREA(#308710); +#308710 = FILL_AREA_STYLE('',(#308711)); +#308711 = FILL_AREA_STYLE_COLOUR('',#282540); +#308712 = STYLED_ITEM('color',(#308713),#52456); +#308713 = PRESENTATION_STYLE_ASSIGNMENT((#308714)); +#308714 = SURFACE_STYLE_USAGE(.BOTH.,#308715); +#308715 = SURFACE_SIDE_STYLE('',(#308716)); +#308716 = SURFACE_STYLE_FILL_AREA(#308717); +#308717 = FILL_AREA_STYLE('',(#308718)); +#308718 = FILL_AREA_STYLE_COLOUR('',#282540); +#308719 = STYLED_ITEM('color',(#308720),#52473); +#308720 = PRESENTATION_STYLE_ASSIGNMENT((#308721)); +#308721 = SURFACE_STYLE_USAGE(.BOTH.,#308722); +#308722 = SURFACE_SIDE_STYLE('',(#308723)); +#308723 = SURFACE_STYLE_FILL_AREA(#308724); +#308724 = FILL_AREA_STYLE('',(#308725)); +#308725 = FILL_AREA_STYLE_COLOUR('',#282540); +#308726 = STYLED_ITEM('color',(#308727),#52490); +#308727 = PRESENTATION_STYLE_ASSIGNMENT((#308728)); +#308728 = SURFACE_STYLE_USAGE(.BOTH.,#308729); +#308729 = SURFACE_SIDE_STYLE('',(#308730)); +#308730 = SURFACE_STYLE_FILL_AREA(#308731); +#308731 = FILL_AREA_STYLE('',(#308732)); +#308732 = FILL_AREA_STYLE_COLOUR('',#303862); +#308733 = STYLED_ITEM('color',(#308734),#52507); +#308734 = PRESENTATION_STYLE_ASSIGNMENT((#308735)); +#308735 = SURFACE_STYLE_USAGE(.BOTH.,#308736); +#308736 = SURFACE_SIDE_STYLE('',(#308737)); +#308737 = SURFACE_STYLE_FILL_AREA(#308738); +#308738 = FILL_AREA_STYLE('',(#308739)); +#308739 = FILL_AREA_STYLE_COLOUR('',#303862); +#308740 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #308741,#308748,#308755,#308762,#308769,#308776,#308783,#308790, + #308797,#308804,#308811,#308818,#308825,#308832,#308839,#308846, + #308853,#308860,#308867,#308874,#308881,#308888,#308895,#308902, + #308909,#308916,#308923,#308930,#308937,#308944,#308951,#308958, + #308965,#308972,#308979,#308986,#308993,#309000,#309007,#309014, + #309021,#309028,#309035,#309042,#309049,#309056,#309063,#309070, + #309077,#309084,#309091,#309098,#309105,#309112,#309119,#309126, + #309133,#309140,#309147,#309154,#309161,#309168,#309175,#309182, + #309189,#309196,#309203,#309210,#309217,#309224,#309231,#309238, + #309245,#309252,#309259,#309266,#309273,#309280,#309287,#309294, + #309301,#309308,#309315,#309322,#309329,#309336,#309343,#309350, + #309357),#14729); +#308741 = STYLED_ITEM('color',(#308742),#12016); +#308742 = PRESENTATION_STYLE_ASSIGNMENT((#308743)); +#308743 = SURFACE_STYLE_USAGE(.BOTH.,#308744); +#308744 = SURFACE_SIDE_STYLE('',(#308745)); +#308745 = SURFACE_STYLE_FILL_AREA(#308746); +#308746 = FILL_AREA_STYLE('',(#308747)); +#308747 = FILL_AREA_STYLE_COLOUR('',#283551); +#308748 = STYLED_ITEM('color',(#308749),#12088); +#308749 = PRESENTATION_STYLE_ASSIGNMENT((#308750)); +#308750 = SURFACE_STYLE_USAGE(.BOTH.,#308751); +#308751 = SURFACE_SIDE_STYLE('',(#308752)); +#308752 = SURFACE_STYLE_FILL_AREA(#308753); +#308753 = FILL_AREA_STYLE('',(#308754)); +#308754 = FILL_AREA_STYLE_COLOUR('',#283551); +#308755 = STYLED_ITEM('color',(#308756),#12127); +#308756 = PRESENTATION_STYLE_ASSIGNMENT((#308757)); +#308757 = SURFACE_STYLE_USAGE(.BOTH.,#308758); +#308758 = SURFACE_SIDE_STYLE('',(#308759)); +#308759 = SURFACE_STYLE_FILL_AREA(#308760); +#308760 = FILL_AREA_STYLE('',(#308761)); +#308761 = FILL_AREA_STYLE_COLOUR('',#283551); +#308762 = STYLED_ITEM('color',(#308763),#12151); +#308763 = PRESENTATION_STYLE_ASSIGNMENT((#308764)); +#308764 = SURFACE_STYLE_USAGE(.BOTH.,#308765); +#308765 = SURFACE_SIDE_STYLE('',(#308766)); +#308766 = SURFACE_STYLE_FILL_AREA(#308767); +#308767 = FILL_AREA_STYLE('',(#308768)); +#308768 = FILL_AREA_STYLE_COLOUR('',#283551); +#308769 = STYLED_ITEM('color',(#308770),#12216); +#308770 = PRESENTATION_STYLE_ASSIGNMENT((#308771)); +#308771 = SURFACE_STYLE_USAGE(.BOTH.,#308772); +#308772 = SURFACE_SIDE_STYLE('',(#308773)); +#308773 = SURFACE_STYLE_FILL_AREA(#308774); +#308774 = FILL_AREA_STYLE('',(#308775)); +#308775 = FILL_AREA_STYLE_COLOUR('',#283551); +#308776 = STYLED_ITEM('color',(#308777),#12240); +#308777 = PRESENTATION_STYLE_ASSIGNMENT((#308778)); +#308778 = SURFACE_STYLE_USAGE(.BOTH.,#308779); +#308779 = SURFACE_SIDE_STYLE('',(#308780)); +#308780 = SURFACE_STYLE_FILL_AREA(#308781); +#308781 = FILL_AREA_STYLE('',(#308782)); +#308782 = FILL_AREA_STYLE_COLOUR('',#283551); +#308783 = STYLED_ITEM('color',(#308784),#12328); +#308784 = PRESENTATION_STYLE_ASSIGNMENT((#308785)); +#308785 = SURFACE_STYLE_USAGE(.BOTH.,#308786); +#308786 = SURFACE_SIDE_STYLE('',(#308787)); +#308787 = SURFACE_STYLE_FILL_AREA(#308788); +#308788 = FILL_AREA_STYLE('',(#308789)); +#308789 = FILL_AREA_STYLE_COLOUR('',#283551); +#308790 = STYLED_ITEM('color',(#308791),#12352); +#308791 = PRESENTATION_STYLE_ASSIGNMENT((#308792)); +#308792 = SURFACE_STYLE_USAGE(.BOTH.,#308793); +#308793 = SURFACE_SIDE_STYLE('',(#308794)); +#308794 = SURFACE_STYLE_FILL_AREA(#308795); +#308795 = FILL_AREA_STYLE('',(#308796)); +#308796 = FILL_AREA_STYLE_COLOUR('',#283551); +#308797 = STYLED_ITEM('color',(#308798),#12417); +#308798 = PRESENTATION_STYLE_ASSIGNMENT((#308799)); +#308799 = SURFACE_STYLE_USAGE(.BOTH.,#308800); +#308800 = SURFACE_SIDE_STYLE('',(#308801)); +#308801 = SURFACE_STYLE_FILL_AREA(#308802); +#308802 = FILL_AREA_STYLE('',(#308803)); +#308803 = FILL_AREA_STYLE_COLOUR('',#283551); +#308804 = STYLED_ITEM('color',(#308805),#12442); +#308805 = PRESENTATION_STYLE_ASSIGNMENT((#308806)); +#308806 = SURFACE_STYLE_USAGE(.BOTH.,#308807); +#308807 = SURFACE_SIDE_STYLE('',(#308808)); +#308808 = SURFACE_STYLE_FILL_AREA(#308809); +#308809 = FILL_AREA_STYLE('',(#308810)); +#308810 = FILL_AREA_STYLE_COLOUR('',#283551); +#308811 = STYLED_ITEM('color',(#308812),#12491); +#308812 = PRESENTATION_STYLE_ASSIGNMENT((#308813)); +#308813 = SURFACE_STYLE_USAGE(.BOTH.,#308814); +#308814 = SURFACE_SIDE_STYLE('',(#308815)); +#308815 = SURFACE_STYLE_FILL_AREA(#308816); +#308816 = FILL_AREA_STYLE('',(#308817)); +#308817 = FILL_AREA_STYLE_COLOUR('',#283551); +#308818 = STYLED_ITEM('color',(#308819),#12508); +#308819 = PRESENTATION_STYLE_ASSIGNMENT((#308820)); +#308820 = SURFACE_STYLE_USAGE(.BOTH.,#308821); +#308821 = SURFACE_SIDE_STYLE('',(#308822)); +#308822 = SURFACE_STYLE_FILL_AREA(#308823); +#308823 = FILL_AREA_STYLE('',(#308824)); +#308824 = FILL_AREA_STYLE_COLOUR('',#283551); +#308825 = STYLED_ITEM('color',(#308826),#12532); +#308826 = PRESENTATION_STYLE_ASSIGNMENT((#308827)); +#308827 = SURFACE_STYLE_USAGE(.BOTH.,#308828); +#308828 = SURFACE_SIDE_STYLE('',(#308829)); +#308829 = SURFACE_STYLE_FILL_AREA(#308830); +#308830 = FILL_AREA_STYLE('',(#308831)); +#308831 = FILL_AREA_STYLE_COLOUR('',#283551); +#308832 = STYLED_ITEM('color',(#308833),#12549); +#308833 = PRESENTATION_STYLE_ASSIGNMENT((#308834)); +#308834 = SURFACE_STYLE_USAGE(.BOTH.,#308835); +#308835 = SURFACE_SIDE_STYLE('',(#308836)); +#308836 = SURFACE_STYLE_FILL_AREA(#308837); +#308837 = FILL_AREA_STYLE('',(#308838)); +#308838 = FILL_AREA_STYLE_COLOUR('',#283551); +#308839 = STYLED_ITEM('color',(#308840),#12687); +#308840 = PRESENTATION_STYLE_ASSIGNMENT((#308841)); +#308841 = SURFACE_STYLE_USAGE(.BOTH.,#308842); +#308842 = SURFACE_SIDE_STYLE('',(#308843)); +#308843 = SURFACE_STYLE_FILL_AREA(#308844); +#308844 = FILL_AREA_STYLE('',(#308845)); +#308845 = FILL_AREA_STYLE_COLOUR('',#283551); +#308846 = STYLED_ITEM('color',(#308847),#12711); +#308847 = PRESENTATION_STYLE_ASSIGNMENT((#308848)); +#308848 = SURFACE_STYLE_USAGE(.BOTH.,#308849); +#308849 = SURFACE_SIDE_STYLE('',(#308850)); +#308850 = SURFACE_STYLE_FILL_AREA(#308851); +#308851 = FILL_AREA_STYLE('',(#308852)); +#308852 = FILL_AREA_STYLE_COLOUR('',#283551); +#308853 = STYLED_ITEM('color',(#308854),#12881); +#308854 = PRESENTATION_STYLE_ASSIGNMENT((#308855)); +#308855 = SURFACE_STYLE_USAGE(.BOTH.,#308856); +#308856 = SURFACE_SIDE_STYLE('',(#308857)); +#308857 = SURFACE_STYLE_FILL_AREA(#308858); +#308858 = FILL_AREA_STYLE('',(#308859)); +#308859 = FILL_AREA_STYLE_COLOUR('',#283551); +#308860 = STYLED_ITEM('color',(#308861),#12905); +#308861 = PRESENTATION_STYLE_ASSIGNMENT((#308862)); +#308862 = SURFACE_STYLE_USAGE(.BOTH.,#308863); +#308863 = SURFACE_SIDE_STYLE('',(#308864)); +#308864 = SURFACE_STYLE_FILL_AREA(#308865); +#308865 = FILL_AREA_STYLE('',(#308866)); +#308866 = FILL_AREA_STYLE_COLOUR('',#283551); +#308867 = STYLED_ITEM('color',(#308868),#12938); +#308868 = PRESENTATION_STYLE_ASSIGNMENT((#308869)); +#308869 = SURFACE_STYLE_USAGE(.BOTH.,#308870); +#308870 = SURFACE_SIDE_STYLE('',(#308871)); +#308871 = SURFACE_STYLE_FILL_AREA(#308872); +#308872 = FILL_AREA_STYLE('',(#308873)); +#308873 = FILL_AREA_STYLE_COLOUR('',#283551); +#308874 = STYLED_ITEM('color',(#308875),#12962); +#308875 = PRESENTATION_STYLE_ASSIGNMENT((#308876)); +#308876 = SURFACE_STYLE_USAGE(.BOTH.,#308877); +#308877 = SURFACE_SIDE_STYLE('',(#308878)); +#308878 = SURFACE_STYLE_FILL_AREA(#308879); +#308879 = FILL_AREA_STYLE('',(#308880)); +#308880 = FILL_AREA_STYLE_COLOUR('',#283551); +#308881 = STYLED_ITEM('color',(#308882),#12993); +#308882 = PRESENTATION_STYLE_ASSIGNMENT((#308883)); +#308883 = SURFACE_STYLE_USAGE(.BOTH.,#308884); +#308884 = SURFACE_SIDE_STYLE('',(#308885)); +#308885 = SURFACE_STYLE_FILL_AREA(#308886); +#308886 = FILL_AREA_STYLE('',(#308887)); +#308887 = FILL_AREA_STYLE_COLOUR('',#283551); +#308888 = STYLED_ITEM('color',(#308889),#13010); +#308889 = PRESENTATION_STYLE_ASSIGNMENT((#308890)); +#308890 = SURFACE_STYLE_USAGE(.BOTH.,#308891); +#308891 = SURFACE_SIDE_STYLE('',(#308892)); +#308892 = SURFACE_STYLE_FILL_AREA(#308893); +#308893 = FILL_AREA_STYLE('',(#308894)); +#308894 = FILL_AREA_STYLE_COLOUR('',#283551); +#308895 = STYLED_ITEM('color',(#308896),#13043); +#308896 = PRESENTATION_STYLE_ASSIGNMENT((#308897)); +#308897 = SURFACE_STYLE_USAGE(.BOTH.,#308898); +#308898 = SURFACE_SIDE_STYLE('',(#308899)); +#308899 = SURFACE_STYLE_FILL_AREA(#308900); +#308900 = FILL_AREA_STYLE('',(#308901)); +#308901 = FILL_AREA_STYLE_COLOUR('',#283551); +#308902 = STYLED_ITEM('color',(#308903),#13067); +#308903 = PRESENTATION_STYLE_ASSIGNMENT((#308904)); +#308904 = SURFACE_STYLE_USAGE(.BOTH.,#308905); +#308905 = SURFACE_SIDE_STYLE('',(#308906)); +#308906 = SURFACE_STYLE_FILL_AREA(#308907); +#308907 = FILL_AREA_STYLE('',(#308908)); +#308908 = FILL_AREA_STYLE_COLOUR('',#283551); +#308909 = STYLED_ITEM('color',(#308910),#13098); +#308910 = PRESENTATION_STYLE_ASSIGNMENT((#308911)); +#308911 = SURFACE_STYLE_USAGE(.BOTH.,#308912); +#308912 = SURFACE_SIDE_STYLE('',(#308913)); +#308913 = SURFACE_STYLE_FILL_AREA(#308914); +#308914 = FILL_AREA_STYLE('',(#308915)); +#308915 = FILL_AREA_STYLE_COLOUR('',#283551); +#308916 = STYLED_ITEM('color',(#308917),#13110); +#308917 = PRESENTATION_STYLE_ASSIGNMENT((#308918)); +#308918 = SURFACE_STYLE_USAGE(.BOTH.,#308919); +#308919 = SURFACE_SIDE_STYLE('',(#308920)); +#308920 = SURFACE_STYLE_FILL_AREA(#308921); +#308921 = FILL_AREA_STYLE('',(#308922)); +#308922 = FILL_AREA_STYLE_COLOUR('',#283551); +#308923 = STYLED_ITEM('color',(#308924),#13143); +#308924 = PRESENTATION_STYLE_ASSIGNMENT((#308925)); +#308925 = SURFACE_STYLE_USAGE(.BOTH.,#308926); +#308926 = SURFACE_SIDE_STYLE('',(#308927)); +#308927 = SURFACE_STYLE_FILL_AREA(#308928); +#308928 = FILL_AREA_STYLE('',(#308929)); +#308929 = FILL_AREA_STYLE_COLOUR('',#283551); +#308930 = STYLED_ITEM('color',(#308931),#13160); +#308931 = PRESENTATION_STYLE_ASSIGNMENT((#308932)); +#308932 = SURFACE_STYLE_USAGE(.BOTH.,#308933); +#308933 = SURFACE_SIDE_STYLE('',(#308934)); +#308934 = SURFACE_STYLE_FILL_AREA(#308935); +#308935 = FILL_AREA_STYLE('',(#308936)); +#308936 = FILL_AREA_STYLE_COLOUR('',#283551); +#308937 = STYLED_ITEM('color',(#308938),#13177); +#308938 = PRESENTATION_STYLE_ASSIGNMENT((#308939)); +#308939 = SURFACE_STYLE_USAGE(.BOTH.,#308940); +#308940 = SURFACE_SIDE_STYLE('',(#308941)); +#308941 = SURFACE_STYLE_FILL_AREA(#308942); +#308942 = FILL_AREA_STYLE('',(#308943)); +#308943 = FILL_AREA_STYLE_COLOUR('',#283551); +#308944 = STYLED_ITEM('color',(#308945),#13189); +#308945 = PRESENTATION_STYLE_ASSIGNMENT((#308946)); +#308946 = SURFACE_STYLE_USAGE(.BOTH.,#308947); +#308947 = SURFACE_SIDE_STYLE('',(#308948)); +#308948 = SURFACE_STYLE_FILL_AREA(#308949); +#308949 = FILL_AREA_STYLE('',(#308950)); +#308950 = FILL_AREA_STYLE_COLOUR('',#283551); +#308951 = STYLED_ITEM('color',(#308952),#13269); +#308952 = PRESENTATION_STYLE_ASSIGNMENT((#308953)); +#308953 = SURFACE_STYLE_USAGE(.BOTH.,#308954); +#308954 = SURFACE_SIDE_STYLE('',(#308955)); +#308955 = SURFACE_STYLE_FILL_AREA(#308956); +#308956 = FILL_AREA_STYLE('',(#308957)); +#308957 = FILL_AREA_STYLE_COLOUR('',#283551); +#308958 = STYLED_ITEM('color',(#308959),#13286); +#308959 = PRESENTATION_STYLE_ASSIGNMENT((#308960)); +#308960 = SURFACE_STYLE_USAGE(.BOTH.,#308961); +#308961 = SURFACE_SIDE_STYLE('',(#308962)); +#308962 = SURFACE_STYLE_FILL_AREA(#308963); +#308963 = FILL_AREA_STYLE('',(#308964)); +#308964 = FILL_AREA_STYLE_COLOUR('',#283551); +#308965 = STYLED_ITEM('color',(#308966),#13303); +#308966 = PRESENTATION_STYLE_ASSIGNMENT((#308967)); +#308967 = SURFACE_STYLE_USAGE(.BOTH.,#308968); +#308968 = SURFACE_SIDE_STYLE('',(#308969)); +#308969 = SURFACE_STYLE_FILL_AREA(#308970); +#308970 = FILL_AREA_STYLE('',(#308971)); +#308971 = FILL_AREA_STYLE_COLOUR('',#283551); +#308972 = STYLED_ITEM('color',(#308973),#13320); +#308973 = PRESENTATION_STYLE_ASSIGNMENT((#308974)); +#308974 = SURFACE_STYLE_USAGE(.BOTH.,#308975); +#308975 = SURFACE_SIDE_STYLE('',(#308976)); +#308976 = SURFACE_STYLE_FILL_AREA(#308977); +#308977 = FILL_AREA_STYLE('',(#308978)); +#308978 = FILL_AREA_STYLE_COLOUR('',#283551); +#308979 = STYLED_ITEM('color',(#308980),#13337); +#308980 = PRESENTATION_STYLE_ASSIGNMENT((#308981)); +#308981 = SURFACE_STYLE_USAGE(.BOTH.,#308982); +#308982 = SURFACE_SIDE_STYLE('',(#308983)); +#308983 = SURFACE_STYLE_FILL_AREA(#308984); +#308984 = FILL_AREA_STYLE('',(#308985)); +#308985 = FILL_AREA_STYLE_COLOUR('',#283551); +#308986 = STYLED_ITEM('color',(#308987),#13354); +#308987 = PRESENTATION_STYLE_ASSIGNMENT((#308988)); +#308988 = SURFACE_STYLE_USAGE(.BOTH.,#308989); +#308989 = SURFACE_SIDE_STYLE('',(#308990)); +#308990 = SURFACE_STYLE_FILL_AREA(#308991); +#308991 = FILL_AREA_STYLE('',(#308992)); +#308992 = FILL_AREA_STYLE_COLOUR('',#283551); +#308993 = STYLED_ITEM('color',(#308994),#13371); +#308994 = PRESENTATION_STYLE_ASSIGNMENT((#308995)); +#308995 = SURFACE_STYLE_USAGE(.BOTH.,#308996); +#308996 = SURFACE_SIDE_STYLE('',(#308997)); +#308997 = SURFACE_STYLE_FILL_AREA(#308998); +#308998 = FILL_AREA_STYLE('',(#308999)); +#308999 = FILL_AREA_STYLE_COLOUR('',#283551); +#309000 = STYLED_ITEM('color',(#309001),#13388); +#309001 = PRESENTATION_STYLE_ASSIGNMENT((#309002)); +#309002 = SURFACE_STYLE_USAGE(.BOTH.,#309003); +#309003 = SURFACE_SIDE_STYLE('',(#309004)); +#309004 = SURFACE_STYLE_FILL_AREA(#309005); +#309005 = FILL_AREA_STYLE('',(#309006)); +#309006 = FILL_AREA_STYLE_COLOUR('',#283551); +#309007 = STYLED_ITEM('color',(#309008),#13405); +#309008 = PRESENTATION_STYLE_ASSIGNMENT((#309009)); +#309009 = SURFACE_STYLE_USAGE(.BOTH.,#309010); +#309010 = SURFACE_SIDE_STYLE('',(#309011)); +#309011 = SURFACE_STYLE_FILL_AREA(#309012); +#309012 = FILL_AREA_STYLE('',(#309013)); +#309013 = FILL_AREA_STYLE_COLOUR('',#283551); +#309014 = STYLED_ITEM('color',(#309015),#13422); +#309015 = PRESENTATION_STYLE_ASSIGNMENT((#309016)); +#309016 = SURFACE_STYLE_USAGE(.BOTH.,#309017); +#309017 = SURFACE_SIDE_STYLE('',(#309018)); +#309018 = SURFACE_STYLE_FILL_AREA(#309019); +#309019 = FILL_AREA_STYLE('',(#309020)); +#309020 = FILL_AREA_STYLE_COLOUR('',#283551); +#309021 = STYLED_ITEM('color',(#309022),#13439); +#309022 = PRESENTATION_STYLE_ASSIGNMENT((#309023)); +#309023 = SURFACE_STYLE_USAGE(.BOTH.,#309024); +#309024 = SURFACE_SIDE_STYLE('',(#309025)); +#309025 = SURFACE_STYLE_FILL_AREA(#309026); +#309026 = FILL_AREA_STYLE('',(#309027)); +#309027 = FILL_AREA_STYLE_COLOUR('',#283551); +#309028 = STYLED_ITEM('color',(#309029),#13451); +#309029 = PRESENTATION_STYLE_ASSIGNMENT((#309030)); +#309030 = SURFACE_STYLE_USAGE(.BOTH.,#309031); +#309031 = SURFACE_SIDE_STYLE('',(#309032)); +#309032 = SURFACE_STYLE_FILL_AREA(#309033); +#309033 = FILL_AREA_STYLE('',(#309034)); +#309034 = FILL_AREA_STYLE_COLOUR('',#283551); +#309035 = STYLED_ITEM('color',(#309036),#13468); +#309036 = PRESENTATION_STYLE_ASSIGNMENT((#309037)); +#309037 = SURFACE_STYLE_USAGE(.BOTH.,#309038); +#309038 = SURFACE_SIDE_STYLE('',(#309039)); +#309039 = SURFACE_STYLE_FILL_AREA(#309040); +#309040 = FILL_AREA_STYLE('',(#309041)); +#309041 = FILL_AREA_STYLE_COLOUR('',#283551); +#309042 = STYLED_ITEM('color',(#309043),#13485); +#309043 = PRESENTATION_STYLE_ASSIGNMENT((#309044)); +#309044 = SURFACE_STYLE_USAGE(.BOTH.,#309045); +#309045 = SURFACE_SIDE_STYLE('',(#309046)); +#309046 = SURFACE_STYLE_FILL_AREA(#309047); +#309047 = FILL_AREA_STYLE('',(#309048)); +#309048 = FILL_AREA_STYLE_COLOUR('',#283551); +#309049 = STYLED_ITEM('color',(#309050),#13531); +#309050 = PRESENTATION_STYLE_ASSIGNMENT((#309051)); +#309051 = SURFACE_STYLE_USAGE(.BOTH.,#309052); +#309052 = SURFACE_SIDE_STYLE('',(#309053)); +#309053 = SURFACE_STYLE_FILL_AREA(#309054); +#309054 = FILL_AREA_STYLE('',(#309055)); +#309055 = FILL_AREA_STYLE_COLOUR('',#283551); +#309056 = STYLED_ITEM('color',(#309057),#13577); +#309057 = PRESENTATION_STYLE_ASSIGNMENT((#309058)); +#309058 = SURFACE_STYLE_USAGE(.BOTH.,#309059); +#309059 = SURFACE_SIDE_STYLE('',(#309060)); +#309060 = SURFACE_STYLE_FILL_AREA(#309061); +#309061 = FILL_AREA_STYLE('',(#309062)); +#309062 = FILL_AREA_STYLE_COLOUR('',#283937); +#309063 = STYLED_ITEM('color',(#309064),#13608); +#309064 = PRESENTATION_STYLE_ASSIGNMENT((#309065)); +#309065 = SURFACE_STYLE_USAGE(.BOTH.,#309066); +#309066 = SURFACE_SIDE_STYLE('',(#309067)); +#309067 = SURFACE_STYLE_FILL_AREA(#309068); +#309068 = FILL_AREA_STYLE('',(#309069)); +#309069 = FILL_AREA_STYLE_COLOUR('',#283937); +#309070 = STYLED_ITEM('color',(#309071),#13632); +#309071 = PRESENTATION_STYLE_ASSIGNMENT((#309072)); +#309072 = SURFACE_STYLE_USAGE(.BOTH.,#309073); +#309073 = SURFACE_SIDE_STYLE('',(#309074)); +#309074 = SURFACE_STYLE_FILL_AREA(#309075); +#309075 = FILL_AREA_STYLE('',(#309076)); +#309076 = FILL_AREA_STYLE_COLOUR('',#283937); +#309077 = STYLED_ITEM('color',(#309078),#13656); +#309078 = PRESENTATION_STYLE_ASSIGNMENT((#309079)); +#309079 = SURFACE_STYLE_USAGE(.BOTH.,#309080); +#309080 = SURFACE_SIDE_STYLE('',(#309081)); +#309081 = SURFACE_STYLE_FILL_AREA(#309082); +#309082 = FILL_AREA_STYLE('',(#309083)); +#309083 = FILL_AREA_STYLE_COLOUR('',#283937); +#309084 = STYLED_ITEM('color',(#309085),#13673); +#309085 = PRESENTATION_STYLE_ASSIGNMENT((#309086)); +#309086 = SURFACE_STYLE_USAGE(.BOTH.,#309087); +#309087 = SURFACE_SIDE_STYLE('',(#309088)); +#309088 = SURFACE_STYLE_FILL_AREA(#309089); +#309089 = FILL_AREA_STYLE('',(#309090)); +#309090 = FILL_AREA_STYLE_COLOUR('',#283937); +#309091 = STYLED_ITEM('color',(#309092),#13704); +#309092 = PRESENTATION_STYLE_ASSIGNMENT((#309093)); +#309093 = SURFACE_STYLE_USAGE(.BOTH.,#309094); +#309094 = SURFACE_SIDE_STYLE('',(#309095)); +#309095 = SURFACE_STYLE_FILL_AREA(#309096); +#309096 = FILL_AREA_STYLE('',(#309097)); +#309097 = FILL_AREA_STYLE_COLOUR('',#283937); +#309098 = STYLED_ITEM('color',(#309099),#13728); +#309099 = PRESENTATION_STYLE_ASSIGNMENT((#309100)); +#309100 = SURFACE_STYLE_USAGE(.BOTH.,#309101); +#309101 = SURFACE_SIDE_STYLE('',(#309102)); +#309102 = SURFACE_STYLE_FILL_AREA(#309103); +#309103 = FILL_AREA_STYLE('',(#309104)); +#309104 = FILL_AREA_STYLE_COLOUR('',#283937); +#309105 = STYLED_ITEM('color',(#309106),#13752); +#309106 = PRESENTATION_STYLE_ASSIGNMENT((#309107)); +#309107 = SURFACE_STYLE_USAGE(.BOTH.,#309108); +#309108 = SURFACE_SIDE_STYLE('',(#309109)); +#309109 = SURFACE_STYLE_FILL_AREA(#309110); +#309110 = FILL_AREA_STYLE('',(#309111)); +#309111 = FILL_AREA_STYLE_COLOUR('',#283937); +#309112 = STYLED_ITEM('color',(#309113),#13769); +#309113 = PRESENTATION_STYLE_ASSIGNMENT((#309114)); +#309114 = SURFACE_STYLE_USAGE(.BOTH.,#309115); +#309115 = SURFACE_SIDE_STYLE('',(#309116)); +#309116 = SURFACE_STYLE_FILL_AREA(#309117); +#309117 = FILL_AREA_STYLE('',(#309118)); +#309118 = FILL_AREA_STYLE_COLOUR('',#283937); +#309119 = STYLED_ITEM('color',(#309120),#13832); +#309120 = PRESENTATION_STYLE_ASSIGNMENT((#309121)); +#309121 = SURFACE_STYLE_USAGE(.BOTH.,#309122); +#309122 = SURFACE_SIDE_STYLE('',(#309123)); +#309123 = SURFACE_STYLE_FILL_AREA(#309124); +#309124 = FILL_AREA_STYLE('',(#309125)); +#309125 = FILL_AREA_STYLE_COLOUR('',#283937); +#309126 = STYLED_ITEM('color',(#309127),#13856); +#309127 = PRESENTATION_STYLE_ASSIGNMENT((#309128)); +#309128 = SURFACE_STYLE_USAGE(.BOTH.,#309129); +#309129 = SURFACE_SIDE_STYLE('',(#309130)); +#309130 = SURFACE_STYLE_FILL_AREA(#309131); +#309131 = FILL_AREA_STYLE('',(#309132)); +#309132 = FILL_AREA_STYLE_COLOUR('',#283937); +#309133 = STYLED_ITEM('color',(#309134),#13912); +#309134 = PRESENTATION_STYLE_ASSIGNMENT((#309135)); +#309135 = SURFACE_STYLE_USAGE(.BOTH.,#309136); +#309136 = SURFACE_SIDE_STYLE('',(#309137)); +#309137 = SURFACE_STYLE_FILL_AREA(#309138); +#309138 = FILL_AREA_STYLE('',(#309139)); +#309139 = FILL_AREA_STYLE_COLOUR('',#283937); +#309140 = STYLED_ITEM('color',(#309141),#13929); +#309141 = PRESENTATION_STYLE_ASSIGNMENT((#309142)); +#309142 = SURFACE_STYLE_USAGE(.BOTH.,#309143); +#309143 = SURFACE_SIDE_STYLE('',(#309144)); +#309144 = SURFACE_STYLE_FILL_AREA(#309145); +#309145 = FILL_AREA_STYLE('',(#309146)); +#309146 = FILL_AREA_STYLE_COLOUR('',#283937); +#309147 = STYLED_ITEM('color',(#309148),#13992); +#309148 = PRESENTATION_STYLE_ASSIGNMENT((#309149)); +#309149 = SURFACE_STYLE_USAGE(.BOTH.,#309150); +#309150 = SURFACE_SIDE_STYLE('',(#309151)); +#309151 = SURFACE_STYLE_FILL_AREA(#309152); +#309152 = FILL_AREA_STYLE('',(#309153)); +#309153 = FILL_AREA_STYLE_COLOUR('',#283937); +#309154 = STYLED_ITEM('color',(#309155),#14016); +#309155 = PRESENTATION_STYLE_ASSIGNMENT((#309156)); +#309156 = SURFACE_STYLE_USAGE(.BOTH.,#309157); +#309157 = SURFACE_SIDE_STYLE('',(#309158)); +#309158 = SURFACE_STYLE_FILL_AREA(#309159); +#309159 = FILL_AREA_STYLE('',(#309160)); +#309160 = FILL_AREA_STYLE_COLOUR('',#283937); +#309161 = STYLED_ITEM('color',(#309162),#14072); +#309162 = PRESENTATION_STYLE_ASSIGNMENT((#309163)); +#309163 = SURFACE_STYLE_USAGE(.BOTH.,#309164); +#309164 = SURFACE_SIDE_STYLE('',(#309165)); +#309165 = SURFACE_STYLE_FILL_AREA(#309166); +#309166 = FILL_AREA_STYLE('',(#309167)); +#309167 = FILL_AREA_STYLE_COLOUR('',#283937); +#309168 = STYLED_ITEM('color',(#309169),#14089); +#309169 = PRESENTATION_STYLE_ASSIGNMENT((#309170)); +#309170 = SURFACE_STYLE_USAGE(.BOTH.,#309171); +#309171 = SURFACE_SIDE_STYLE('',(#309172)); +#309172 = SURFACE_STYLE_FILL_AREA(#309173); +#309173 = FILL_AREA_STYLE('',(#309174)); +#309174 = FILL_AREA_STYLE_COLOUR('',#283937); +#309175 = STYLED_ITEM('color',(#309176),#14120); +#309176 = PRESENTATION_STYLE_ASSIGNMENT((#309177)); +#309177 = SURFACE_STYLE_USAGE(.BOTH.,#309178); +#309178 = SURFACE_SIDE_STYLE('',(#309179)); +#309179 = SURFACE_STYLE_FILL_AREA(#309180); +#309180 = FILL_AREA_STYLE('',(#309181)); +#309181 = FILL_AREA_STYLE_COLOUR('',#283937); +#309182 = STYLED_ITEM('color',(#309183),#14144); +#309183 = PRESENTATION_STYLE_ASSIGNMENT((#309184)); +#309184 = SURFACE_STYLE_USAGE(.BOTH.,#309185); +#309185 = SURFACE_SIDE_STYLE('',(#309186)); +#309186 = SURFACE_STYLE_FILL_AREA(#309187); +#309187 = FILL_AREA_STYLE('',(#309188)); +#309188 = FILL_AREA_STYLE_COLOUR('',#283937); +#309189 = STYLED_ITEM('color',(#309190),#14168); +#309190 = PRESENTATION_STYLE_ASSIGNMENT((#309191)); +#309191 = SURFACE_STYLE_USAGE(.BOTH.,#309192); +#309192 = SURFACE_SIDE_STYLE('',(#309193)); +#309193 = SURFACE_STYLE_FILL_AREA(#309194); +#309194 = FILL_AREA_STYLE('',(#309195)); +#309195 = FILL_AREA_STYLE_COLOUR('',#283937); +#309196 = STYLED_ITEM('color',(#309197),#14185); +#309197 = PRESENTATION_STYLE_ASSIGNMENT((#309198)); +#309198 = SURFACE_STYLE_USAGE(.BOTH.,#309199); +#309199 = SURFACE_SIDE_STYLE('',(#309200)); +#309200 = SURFACE_STYLE_FILL_AREA(#309201); +#309201 = FILL_AREA_STYLE('',(#309202)); +#309202 = FILL_AREA_STYLE_COLOUR('',#283937); +#309203 = STYLED_ITEM('color',(#309204),#14216); +#309204 = PRESENTATION_STYLE_ASSIGNMENT((#309205)); +#309205 = SURFACE_STYLE_USAGE(.BOTH.,#309206); +#309206 = SURFACE_SIDE_STYLE('',(#309207)); +#309207 = SURFACE_STYLE_FILL_AREA(#309208); +#309208 = FILL_AREA_STYLE('',(#309209)); +#309209 = FILL_AREA_STYLE_COLOUR('',#283937); +#309210 = STYLED_ITEM('color',(#309211),#14240); +#309211 = PRESENTATION_STYLE_ASSIGNMENT((#309212)); +#309212 = SURFACE_STYLE_USAGE(.BOTH.,#309213); +#309213 = SURFACE_SIDE_STYLE('',(#309214)); +#309214 = SURFACE_STYLE_FILL_AREA(#309215); +#309215 = FILL_AREA_STYLE('',(#309216)); +#309216 = FILL_AREA_STYLE_COLOUR('',#283937); +#309217 = STYLED_ITEM('color',(#309218),#14264); +#309218 = PRESENTATION_STYLE_ASSIGNMENT((#309219)); +#309219 = SURFACE_STYLE_USAGE(.BOTH.,#309220); +#309220 = SURFACE_SIDE_STYLE('',(#309221)); +#309221 = SURFACE_STYLE_FILL_AREA(#309222); +#309222 = FILL_AREA_STYLE('',(#309223)); +#309223 = FILL_AREA_STYLE_COLOUR('',#283937); +#309224 = STYLED_ITEM('color',(#309225),#14281); +#309225 = PRESENTATION_STYLE_ASSIGNMENT((#309226)); +#309226 = SURFACE_STYLE_USAGE(.BOTH.,#309227); +#309227 = SURFACE_SIDE_STYLE('',(#309228)); +#309228 = SURFACE_STYLE_FILL_AREA(#309229); +#309229 = FILL_AREA_STYLE('',(#309230)); +#309230 = FILL_AREA_STYLE_COLOUR('',#283937); +#309231 = STYLED_ITEM('color',(#309232),#14328); +#309232 = PRESENTATION_STYLE_ASSIGNMENT((#309233)); +#309233 = SURFACE_STYLE_USAGE(.BOTH.,#309234); +#309234 = SURFACE_SIDE_STYLE('',(#309235)); +#309235 = SURFACE_STYLE_FILL_AREA(#309236); +#309236 = FILL_AREA_STYLE('',(#309237)); +#309237 = FILL_AREA_STYLE_COLOUR('',#283937); +#309238 = STYLED_ITEM('color',(#309239),#14359); +#309239 = PRESENTATION_STYLE_ASSIGNMENT((#309240)); +#309240 = SURFACE_STYLE_USAGE(.BOTH.,#309241); +#309241 = SURFACE_SIDE_STYLE('',(#309242)); +#309242 = SURFACE_STYLE_FILL_AREA(#309243); +#309243 = FILL_AREA_STYLE('',(#309244)); +#309244 = FILL_AREA_STYLE_COLOUR('',#283937); +#309245 = STYLED_ITEM('color',(#309246),#14371); +#309246 = PRESENTATION_STYLE_ASSIGNMENT((#309247)); +#309247 = SURFACE_STYLE_USAGE(.BOTH.,#309248); +#309248 = SURFACE_SIDE_STYLE('',(#309249)); +#309249 = SURFACE_STYLE_FILL_AREA(#309250); +#309250 = FILL_AREA_STYLE('',(#309251)); +#309251 = FILL_AREA_STYLE_COLOUR('',#283937); +#309252 = STYLED_ITEM('color',(#309253),#14388); +#309253 = PRESENTATION_STYLE_ASSIGNMENT((#309254)); +#309254 = SURFACE_STYLE_USAGE(.BOTH.,#309255); +#309255 = SURFACE_SIDE_STYLE('',(#309256)); +#309256 = SURFACE_STYLE_FILL_AREA(#309257); +#309257 = FILL_AREA_STYLE('',(#309258)); +#309258 = FILL_AREA_STYLE_COLOUR('',#283937); +#309259 = STYLED_ITEM('color',(#309260),#14414); +#309260 = PRESENTATION_STYLE_ASSIGNMENT((#309261)); +#309261 = SURFACE_STYLE_USAGE(.BOTH.,#309262); +#309262 = SURFACE_SIDE_STYLE('',(#309263)); +#309263 = SURFACE_STYLE_FILL_AREA(#309264); +#309264 = FILL_AREA_STYLE('',(#309265)); +#309265 = FILL_AREA_STYLE_COLOUR('',#283937); +#309266 = STYLED_ITEM('color',(#309267),#14447); +#309267 = PRESENTATION_STYLE_ASSIGNMENT((#309268)); +#309268 = SURFACE_STYLE_USAGE(.BOTH.,#309269); +#309269 = SURFACE_SIDE_STYLE('',(#309270)); +#309270 = SURFACE_STYLE_FILL_AREA(#309271); +#309271 = FILL_AREA_STYLE('',(#309272)); +#309272 = FILL_AREA_STYLE_COLOUR('',#283937); +#309273 = STYLED_ITEM('color',(#309274),#14494); +#309274 = PRESENTATION_STYLE_ASSIGNMENT((#309275)); +#309275 = SURFACE_STYLE_USAGE(.BOTH.,#309276); +#309276 = SURFACE_SIDE_STYLE('',(#309277)); +#309277 = SURFACE_STYLE_FILL_AREA(#309278); +#309278 = FILL_AREA_STYLE('',(#309279)); +#309279 = FILL_AREA_STYLE_COLOUR('',#283937); +#309280 = STYLED_ITEM('color',(#309281),#14525); +#309281 = PRESENTATION_STYLE_ASSIGNMENT((#309282)); +#309282 = SURFACE_STYLE_USAGE(.BOTH.,#309283); +#309283 = SURFACE_SIDE_STYLE('',(#309284)); +#309284 = SURFACE_STYLE_FILL_AREA(#309285); +#309285 = FILL_AREA_STYLE('',(#309286)); +#309286 = FILL_AREA_STYLE_COLOUR('',#283937); +#309287 = STYLED_ITEM('color',(#309288),#14537); +#309288 = PRESENTATION_STYLE_ASSIGNMENT((#309289)); +#309289 = SURFACE_STYLE_USAGE(.BOTH.,#309290); +#309290 = SURFACE_SIDE_STYLE('',(#309291)); +#309291 = SURFACE_STYLE_FILL_AREA(#309292); +#309292 = FILL_AREA_STYLE('',(#309293)); +#309293 = FILL_AREA_STYLE_COLOUR('',#283937); +#309294 = STYLED_ITEM('color',(#309295),#14554); +#309295 = PRESENTATION_STYLE_ASSIGNMENT((#309296)); +#309296 = SURFACE_STYLE_USAGE(.BOTH.,#309297); +#309297 = SURFACE_SIDE_STYLE('',(#309298)); +#309298 = SURFACE_STYLE_FILL_AREA(#309299); +#309299 = FILL_AREA_STYLE('',(#309300)); +#309300 = FILL_AREA_STYLE_COLOUR('',#283937); +#309301 = STYLED_ITEM('color',(#309302),#14580); +#309302 = PRESENTATION_STYLE_ASSIGNMENT((#309303)); +#309303 = SURFACE_STYLE_USAGE(.BOTH.,#309304); +#309304 = SURFACE_SIDE_STYLE('',(#309305)); +#309305 = SURFACE_STYLE_FILL_AREA(#309306); +#309306 = FILL_AREA_STYLE('',(#309307)); +#309307 = FILL_AREA_STYLE_COLOUR('',#283937); +#309308 = STYLED_ITEM('color',(#309309),#14613); +#309309 = PRESENTATION_STYLE_ASSIGNMENT((#309310)); +#309310 = SURFACE_STYLE_USAGE(.BOTH.,#309311); +#309311 = SURFACE_SIDE_STYLE('',(#309312)); +#309312 = SURFACE_STYLE_FILL_AREA(#309313); +#309313 = FILL_AREA_STYLE('',(#309314)); +#309314 = FILL_AREA_STYLE_COLOUR('',#283937); +#309315 = STYLED_ITEM('color',(#309316),#14625); +#309316 = PRESENTATION_STYLE_ASSIGNMENT((#309317)); +#309317 = SURFACE_STYLE_USAGE(.BOTH.,#309318); +#309318 = SURFACE_SIDE_STYLE('',(#309319)); +#309319 = SURFACE_STYLE_FILL_AREA(#309320); +#309320 = FILL_AREA_STYLE('',(#309321)); +#309321 = FILL_AREA_STYLE_COLOUR('',#283937); +#309322 = STYLED_ITEM('color',(#309323),#14637); +#309323 = PRESENTATION_STYLE_ASSIGNMENT((#309324)); +#309324 = SURFACE_STYLE_USAGE(.BOTH.,#309325); +#309325 = SURFACE_SIDE_STYLE('',(#309326)); +#309326 = SURFACE_STYLE_FILL_AREA(#309327); +#309327 = FILL_AREA_STYLE('',(#309328)); +#309328 = FILL_AREA_STYLE_COLOUR('',#283937); +#309329 = STYLED_ITEM('color',(#309330),#14654); +#309330 = PRESENTATION_STYLE_ASSIGNMENT((#309331)); +#309331 = SURFACE_STYLE_USAGE(.BOTH.,#309332); +#309332 = SURFACE_SIDE_STYLE('',(#309333)); +#309333 = SURFACE_STYLE_FILL_AREA(#309334); +#309334 = FILL_AREA_STYLE('',(#309335)); +#309335 = FILL_AREA_STYLE_COLOUR('',#283937); +#309336 = STYLED_ITEM('color',(#309337),#14671); +#309337 = PRESENTATION_STYLE_ASSIGNMENT((#309338)); +#309338 = SURFACE_STYLE_USAGE(.BOTH.,#309339); +#309339 = SURFACE_SIDE_STYLE('',(#309340)); +#309340 = SURFACE_STYLE_FILL_AREA(#309341); +#309341 = FILL_AREA_STYLE('',(#309342)); +#309342 = FILL_AREA_STYLE_COLOUR('',#283937); +#309343 = STYLED_ITEM('color',(#309344),#14683); +#309344 = PRESENTATION_STYLE_ASSIGNMENT((#309345)); +#309345 = SURFACE_STYLE_USAGE(.BOTH.,#309346); +#309346 = SURFACE_SIDE_STYLE('',(#309347)); +#309347 = SURFACE_STYLE_FILL_AREA(#309348); +#309348 = FILL_AREA_STYLE('',(#309349)); +#309349 = FILL_AREA_STYLE_COLOUR('',#283937); +#309350 = STYLED_ITEM('color',(#309351),#14700); +#309351 = PRESENTATION_STYLE_ASSIGNMENT((#309352)); +#309352 = SURFACE_STYLE_USAGE(.BOTH.,#309353); +#309353 = SURFACE_SIDE_STYLE('',(#309354)); +#309354 = SURFACE_STYLE_FILL_AREA(#309355); +#309355 = FILL_AREA_STYLE('',(#309356)); +#309356 = FILL_AREA_STYLE_COLOUR('',#283937); +#309357 = STYLED_ITEM('color',(#309358),#14717); +#309358 = PRESENTATION_STYLE_ASSIGNMENT((#309359)); +#309359 = SURFACE_STYLE_USAGE(.BOTH.,#309360); +#309360 = SURFACE_SIDE_STYLE('',(#309361)); +#309361 = SURFACE_STYLE_FILL_AREA(#309362); +#309362 = FILL_AREA_STYLE('',(#309363)); +#309363 = FILL_AREA_STYLE_COLOUR('',#283937); +#309364 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #309365,#309374,#309383,#309392,#309401,#309410,#309419,#309428, + #309437,#309446,#309455,#309464,#309473,#309482,#309491,#309500, + #309509,#309518,#309527,#309536,#309545,#309554,#309563,#309572, + #309581,#309590,#309599,#309608,#309617,#309626,#309635,#309644, + #309653,#309662,#309671,#309680,#309689,#309698,#309707,#309716, + #309725,#309734,#309743,#309752,#309761,#309770,#309779,#309788, + #309797,#309806,#309815,#309824,#309833,#309842,#309851,#309860, + #309869,#309878,#309887,#309896,#309905,#309914,#309923,#309932, + #309941,#309950,#309959,#309968,#309977,#309986,#309995,#310004, + #310013,#310022,#310031,#310040,#310049,#310058,#310067,#310076, + #310085,#310094,#310103,#310112,#310121,#310130,#310139,#310148, + #310157,#310166,#310175,#310184,#310193,#310202,#310211,#310220, + #310229,#310238,#310247,#310256,#310265,#310274,#310283,#310292, + #310301,#310310,#310319,#310328,#310337,#310346,#310355,#310364, + #310373,#310382,#310391,#310400,#310409,#310418,#310427,#310436, + #310445,#310454,#310463,#310472,#310481,#310490,#310499,#310508, + #310517,#310526,#310535,#310544,#310553,#310562,#310571,#310580, + #310589,#310598,#310607,#310616,#310625,#310634,#310643,#310652, + #310661,#310670,#310679),#42682); +#309365 = STYLED_ITEM('color',(#309366),#38216); +#309366 = PRESENTATION_STYLE_ASSIGNMENT((#309367,#309372)); +#309367 = SURFACE_STYLE_USAGE(.BOTH.,#309368); +#309368 = SURFACE_SIDE_STYLE('',(#309369)); +#309369 = SURFACE_STYLE_FILL_AREA(#309370); +#309370 = FILL_AREA_STYLE('',(#309371)); +#309371 = FILL_AREA_STYLE_COLOUR('',#279624); +#309372 = CURVE_STYLE('',#309373,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309373 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309374 = STYLED_ITEM('color',(#309375),#38254); +#309375 = PRESENTATION_STYLE_ASSIGNMENT((#309376,#309381)); +#309376 = SURFACE_STYLE_USAGE(.BOTH.,#309377); +#309377 = SURFACE_SIDE_STYLE('',(#309378)); +#309378 = SURFACE_STYLE_FILL_AREA(#309379); +#309379 = FILL_AREA_STYLE('',(#309380)); +#309380 = FILL_AREA_STYLE_COLOUR('',#279624); +#309381 = CURVE_STYLE('',#309382,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309382 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309383 = STYLED_ITEM('color',(#309384),#38317); +#309384 = PRESENTATION_STYLE_ASSIGNMENT((#309385,#309390)); +#309385 = SURFACE_STYLE_USAGE(.BOTH.,#309386); +#309386 = SURFACE_SIDE_STYLE('',(#309387)); +#309387 = SURFACE_STYLE_FILL_AREA(#309388); +#309388 = FILL_AREA_STYLE('',(#309389)); +#309389 = FILL_AREA_STYLE_COLOUR('',#279624); +#309390 = CURVE_STYLE('',#309391,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309391 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309392 = STYLED_ITEM('color',(#309393),#38340); +#309393 = PRESENTATION_STYLE_ASSIGNMENT((#309394,#309399)); +#309394 = SURFACE_STYLE_USAGE(.BOTH.,#309395); +#309395 = SURFACE_SIDE_STYLE('',(#309396)); +#309396 = SURFACE_STYLE_FILL_AREA(#309397); +#309397 = FILL_AREA_STYLE('',(#309398)); +#309398 = FILL_AREA_STYLE_COLOUR('',#279624); +#309399 = CURVE_STYLE('',#309400,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309401 = STYLED_ITEM('color',(#309402),#38369); +#309402 = PRESENTATION_STYLE_ASSIGNMENT((#309403,#309408)); +#309403 = SURFACE_STYLE_USAGE(.BOTH.,#309404); +#309404 = SURFACE_SIDE_STYLE('',(#309405)); +#309405 = SURFACE_STYLE_FILL_AREA(#309406); +#309406 = FILL_AREA_STYLE('',(#309407)); +#309407 = FILL_AREA_STYLE_COLOUR('',#279624); +#309408 = CURVE_STYLE('',#309409,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309409 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309410 = STYLED_ITEM('color',(#309411),#38392); +#309411 = PRESENTATION_STYLE_ASSIGNMENT((#309412,#309417)); +#309412 = SURFACE_STYLE_USAGE(.BOTH.,#309413); +#309413 = SURFACE_SIDE_STYLE('',(#309414)); +#309414 = SURFACE_STYLE_FILL_AREA(#309415); +#309415 = FILL_AREA_STYLE('',(#309416)); +#309416 = FILL_AREA_STYLE_COLOUR('',#279624); +#309417 = CURVE_STYLE('',#309418,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309418 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309419 = STYLED_ITEM('color',(#309420),#38479); +#309420 = PRESENTATION_STYLE_ASSIGNMENT((#309421,#309426)); +#309421 = SURFACE_STYLE_USAGE(.BOTH.,#309422); +#309422 = SURFACE_SIDE_STYLE('',(#309423)); +#309423 = SURFACE_STYLE_FILL_AREA(#309424); +#309424 = FILL_AREA_STYLE('',(#309425)); +#309425 = FILL_AREA_STYLE_COLOUR('',#279624); +#309426 = CURVE_STYLE('',#309427,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309427 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309428 = STYLED_ITEM('color',(#309429),#38566); +#309429 = PRESENTATION_STYLE_ASSIGNMENT((#309430,#309435)); +#309430 = SURFACE_STYLE_USAGE(.BOTH.,#309431); +#309431 = SURFACE_SIDE_STYLE('',(#309432)); +#309432 = SURFACE_STYLE_FILL_AREA(#309433); +#309433 = FILL_AREA_STYLE('',(#309434)); +#309434 = FILL_AREA_STYLE_COLOUR('',#279624); +#309435 = CURVE_STYLE('',#309436,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309436 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309437 = STYLED_ITEM('color',(#309438),#38589); +#309438 = PRESENTATION_STYLE_ASSIGNMENT((#309439,#309444)); +#309439 = SURFACE_STYLE_USAGE(.BOTH.,#309440); +#309440 = SURFACE_SIDE_STYLE('',(#309441)); +#309441 = SURFACE_STYLE_FILL_AREA(#309442); +#309442 = FILL_AREA_STYLE('',(#309443)); +#309443 = FILL_AREA_STYLE_COLOUR('',#279624); +#309444 = CURVE_STYLE('',#309445,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309445 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309446 = STYLED_ITEM('color',(#309447),#38612); +#309447 = PRESENTATION_STYLE_ASSIGNMENT((#309448,#309453)); +#309448 = SURFACE_STYLE_USAGE(.BOTH.,#309449); +#309449 = SURFACE_SIDE_STYLE('',(#309450)); +#309450 = SURFACE_STYLE_FILL_AREA(#309451); +#309451 = FILL_AREA_STYLE('',(#309452)); +#309452 = FILL_AREA_STYLE_COLOUR('',#279624); +#309453 = CURVE_STYLE('',#309454,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309454 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309455 = STYLED_ITEM('color',(#309456),#38629); +#309456 = PRESENTATION_STYLE_ASSIGNMENT((#309457,#309462)); +#309457 = SURFACE_STYLE_USAGE(.BOTH.,#309458); +#309458 = SURFACE_SIDE_STYLE('',(#309459)); +#309459 = SURFACE_STYLE_FILL_AREA(#309460); +#309460 = FILL_AREA_STYLE('',(#309461)); +#309461 = FILL_AREA_STYLE_COLOUR('',#279624); +#309462 = CURVE_STYLE('',#309463,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309463 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309464 = STYLED_ITEM('color',(#309465),#38652); +#309465 = PRESENTATION_STYLE_ASSIGNMENT((#309466,#309471)); +#309466 = SURFACE_STYLE_USAGE(.BOTH.,#309467); +#309467 = SURFACE_SIDE_STYLE('',(#309468)); +#309468 = SURFACE_STYLE_FILL_AREA(#309469); +#309469 = FILL_AREA_STYLE('',(#309470)); +#309470 = FILL_AREA_STYLE_COLOUR('',#279624); +#309471 = CURVE_STYLE('',#309472,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309472 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309473 = STYLED_ITEM('color',(#309474),#38740); +#309474 = PRESENTATION_STYLE_ASSIGNMENT((#309475,#309480)); +#309475 = SURFACE_STYLE_USAGE(.BOTH.,#309476); +#309476 = SURFACE_SIDE_STYLE('',(#309477)); +#309477 = SURFACE_STYLE_FILL_AREA(#309478); +#309478 = FILL_AREA_STYLE('',(#309479)); +#309479 = FILL_AREA_STYLE_COLOUR('',#279624); +#309480 = CURVE_STYLE('',#309481,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309481 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309482 = STYLED_ITEM('color',(#309483),#38756); +#309483 = PRESENTATION_STYLE_ASSIGNMENT((#309484,#309489)); +#309484 = SURFACE_STYLE_USAGE(.BOTH.,#309485); +#309485 = SURFACE_SIDE_STYLE('',(#309486)); +#309486 = SURFACE_STYLE_FILL_AREA(#309487); +#309487 = FILL_AREA_STYLE('',(#309488)); +#309488 = FILL_AREA_STYLE_COLOUR('',#279624); +#309489 = CURVE_STYLE('',#309490,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309490 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309491 = STYLED_ITEM('color',(#309492),#38786); +#309492 = PRESENTATION_STYLE_ASSIGNMENT((#309493,#309498)); +#309493 = SURFACE_STYLE_USAGE(.BOTH.,#309494); +#309494 = SURFACE_SIDE_STYLE('',(#309495)); +#309495 = SURFACE_STYLE_FILL_AREA(#309496); +#309496 = FILL_AREA_STYLE('',(#309497)); +#309497 = FILL_AREA_STYLE_COLOUR('',#282540); +#309498 = CURVE_STYLE('',#309499,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309499 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309500 = STYLED_ITEM('color',(#309501),#38817); +#309501 = PRESENTATION_STYLE_ASSIGNMENT((#309502,#309507)); +#309502 = SURFACE_STYLE_USAGE(.BOTH.,#309503); +#309503 = SURFACE_SIDE_STYLE('',(#309504)); +#309504 = SURFACE_STYLE_FILL_AREA(#309505); +#309505 = FILL_AREA_STYLE('',(#309506)); +#309506 = FILL_AREA_STYLE_COLOUR('',#279624); +#309507 = CURVE_STYLE('',#309508,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309508 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309509 = STYLED_ITEM('color',(#309510),#38848); +#309510 = PRESENTATION_STYLE_ASSIGNMENT((#309511,#309516)); +#309511 = SURFACE_STYLE_USAGE(.BOTH.,#309512); +#309512 = SURFACE_SIDE_STYLE('',(#309513)); +#309513 = SURFACE_STYLE_FILL_AREA(#309514); +#309514 = FILL_AREA_STYLE('',(#309515)); +#309515 = FILL_AREA_STYLE_COLOUR('',#282540); +#309516 = CURVE_STYLE('',#309517,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309517 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309518 = STYLED_ITEM('color',(#309519),#38879); +#309519 = PRESENTATION_STYLE_ASSIGNMENT((#309520,#309525)); +#309520 = SURFACE_STYLE_USAGE(.BOTH.,#309521); +#309521 = SURFACE_SIDE_STYLE('',(#309522)); +#309522 = SURFACE_STYLE_FILL_AREA(#309523); +#309523 = FILL_AREA_STYLE('',(#309524)); +#309524 = FILL_AREA_STYLE_COLOUR('',#279624); +#309525 = CURVE_STYLE('',#309526,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309526 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309527 = STYLED_ITEM('color',(#309528),#38910); +#309528 = PRESENTATION_STYLE_ASSIGNMENT((#309529,#309534)); +#309529 = SURFACE_STYLE_USAGE(.BOTH.,#309530); +#309530 = SURFACE_SIDE_STYLE('',(#309531)); +#309531 = SURFACE_STYLE_FILL_AREA(#309532); +#309532 = FILL_AREA_STYLE('',(#309533)); +#309533 = FILL_AREA_STYLE_COLOUR('',#282540); +#309534 = CURVE_STYLE('',#309535,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309535 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309536 = STYLED_ITEM('color',(#309537),#38941); +#309537 = PRESENTATION_STYLE_ASSIGNMENT((#309538,#309543)); +#309538 = SURFACE_STYLE_USAGE(.BOTH.,#309539); +#309539 = SURFACE_SIDE_STYLE('',(#309540)); +#309540 = SURFACE_STYLE_FILL_AREA(#309541); +#309541 = FILL_AREA_STYLE('',(#309542)); +#309542 = FILL_AREA_STYLE_COLOUR('',#279624); +#309543 = CURVE_STYLE('',#309544,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309544 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309545 = STYLED_ITEM('color',(#309546),#38972); +#309546 = PRESENTATION_STYLE_ASSIGNMENT((#309547,#309552)); +#309547 = SURFACE_STYLE_USAGE(.BOTH.,#309548); +#309548 = SURFACE_SIDE_STYLE('',(#309549)); +#309549 = SURFACE_STYLE_FILL_AREA(#309550); +#309550 = FILL_AREA_STYLE('',(#309551)); +#309551 = FILL_AREA_STYLE_COLOUR('',#282540); +#309552 = CURVE_STYLE('',#309553,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309553 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309554 = STYLED_ITEM('color',(#309555),#39003); +#309555 = PRESENTATION_STYLE_ASSIGNMENT((#309556,#309561)); +#309556 = SURFACE_STYLE_USAGE(.BOTH.,#309557); +#309557 = SURFACE_SIDE_STYLE('',(#309558)); +#309558 = SURFACE_STYLE_FILL_AREA(#309559); +#309559 = FILL_AREA_STYLE('',(#309560)); +#309560 = FILL_AREA_STYLE_COLOUR('',#279624); +#309561 = CURVE_STYLE('',#309562,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309562 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309563 = STYLED_ITEM('color',(#309564),#39020); +#309564 = PRESENTATION_STYLE_ASSIGNMENT((#309565,#309570)); +#309565 = SURFACE_STYLE_USAGE(.BOTH.,#309566); +#309566 = SURFACE_SIDE_STYLE('',(#309567)); +#309567 = SURFACE_STYLE_FILL_AREA(#309568); +#309568 = FILL_AREA_STYLE('',(#309569)); +#309569 = FILL_AREA_STYLE_COLOUR('',#279624); +#309570 = CURVE_STYLE('',#309571,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309571 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309572 = STYLED_ITEM('color',(#309573),#39037); +#309573 = PRESENTATION_STYLE_ASSIGNMENT((#309574,#309579)); +#309574 = SURFACE_STYLE_USAGE(.BOTH.,#309575); +#309575 = SURFACE_SIDE_STYLE('',(#309576)); +#309576 = SURFACE_STYLE_FILL_AREA(#309577); +#309577 = FILL_AREA_STYLE('',(#309578)); +#309578 = FILL_AREA_STYLE_COLOUR('',#282540); +#309579 = CURVE_STYLE('',#309580,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309581 = STYLED_ITEM('color',(#309582),#39068); +#309582 = PRESENTATION_STYLE_ASSIGNMENT((#309583,#309588)); +#309583 = SURFACE_STYLE_USAGE(.BOTH.,#309584); +#309584 = SURFACE_SIDE_STYLE('',(#309585)); +#309585 = SURFACE_STYLE_FILL_AREA(#309586); +#309586 = FILL_AREA_STYLE('',(#309587)); +#309587 = FILL_AREA_STYLE_COLOUR('',#279624); +#309588 = CURVE_STYLE('',#309589,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309590 = STYLED_ITEM('color',(#309591),#39099); +#309591 = PRESENTATION_STYLE_ASSIGNMENT((#309592,#309597)); +#309592 = SURFACE_STYLE_USAGE(.BOTH.,#309593); +#309593 = SURFACE_SIDE_STYLE('',(#309594)); +#309594 = SURFACE_STYLE_FILL_AREA(#309595); +#309595 = FILL_AREA_STYLE('',(#309596)); +#309596 = FILL_AREA_STYLE_COLOUR('',#282540); +#309597 = CURVE_STYLE('',#309598,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309599 = STYLED_ITEM('color',(#309600),#39130); +#309600 = PRESENTATION_STYLE_ASSIGNMENT((#309601,#309606)); +#309601 = SURFACE_STYLE_USAGE(.BOTH.,#309602); +#309602 = SURFACE_SIDE_STYLE('',(#309603)); +#309603 = SURFACE_STYLE_FILL_AREA(#309604); +#309604 = FILL_AREA_STYLE('',(#309605)); +#309605 = FILL_AREA_STYLE_COLOUR('',#279624); +#309606 = CURVE_STYLE('',#309607,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309608 = STYLED_ITEM('color',(#309609),#39161); +#309609 = PRESENTATION_STYLE_ASSIGNMENT((#309610,#309615)); +#309610 = SURFACE_STYLE_USAGE(.BOTH.,#309611); +#309611 = SURFACE_SIDE_STYLE('',(#309612)); +#309612 = SURFACE_STYLE_FILL_AREA(#309613); +#309613 = FILL_AREA_STYLE('',(#309614)); +#309614 = FILL_AREA_STYLE_COLOUR('',#282540); +#309615 = CURVE_STYLE('',#309616,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309617 = STYLED_ITEM('color',(#309618),#39192); +#309618 = PRESENTATION_STYLE_ASSIGNMENT((#309619,#309624)); +#309619 = SURFACE_STYLE_USAGE(.BOTH.,#309620); +#309620 = SURFACE_SIDE_STYLE('',(#309621)); +#309621 = SURFACE_STYLE_FILL_AREA(#309622); +#309622 = FILL_AREA_STYLE('',(#309623)); +#309623 = FILL_AREA_STYLE_COLOUR('',#279624); +#309624 = CURVE_STYLE('',#309625,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309626 = STYLED_ITEM('color',(#309627),#39223); +#309627 = PRESENTATION_STYLE_ASSIGNMENT((#309628,#309633)); +#309628 = SURFACE_STYLE_USAGE(.BOTH.,#309629); +#309629 = SURFACE_SIDE_STYLE('',(#309630)); +#309630 = SURFACE_STYLE_FILL_AREA(#309631); +#309631 = FILL_AREA_STYLE('',(#309632)); +#309632 = FILL_AREA_STYLE_COLOUR('',#282540); +#309633 = CURVE_STYLE('',#309634,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309635 = STYLED_ITEM('color',(#309636),#39254); +#309636 = PRESENTATION_STYLE_ASSIGNMENT((#309637,#309642)); +#309637 = SURFACE_STYLE_USAGE(.BOTH.,#309638); +#309638 = SURFACE_SIDE_STYLE('',(#309639)); +#309639 = SURFACE_STYLE_FILL_AREA(#309640); +#309640 = FILL_AREA_STYLE('',(#309641)); +#309641 = FILL_AREA_STYLE_COLOUR('',#279624); +#309642 = CURVE_STYLE('',#309643,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309644 = STYLED_ITEM('color',(#309645),#39284); +#309645 = PRESENTATION_STYLE_ASSIGNMENT((#309646,#309651)); +#309646 = SURFACE_STYLE_USAGE(.BOTH.,#309647); +#309647 = SURFACE_SIDE_STYLE('',(#309648)); +#309648 = SURFACE_STYLE_FILL_AREA(#309649); +#309649 = FILL_AREA_STYLE('',(#309650)); +#309650 = FILL_AREA_STYLE_COLOUR('',#279624); +#309651 = CURVE_STYLE('',#309652,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309653 = STYLED_ITEM('color',(#309654),#39307); +#309654 = PRESENTATION_STYLE_ASSIGNMENT((#309655,#309660)); +#309655 = SURFACE_STYLE_USAGE(.BOTH.,#309656); +#309656 = SURFACE_SIDE_STYLE('',(#309657)); +#309657 = SURFACE_STYLE_FILL_AREA(#309658); +#309658 = FILL_AREA_STYLE('',(#309659)); +#309659 = FILL_AREA_STYLE_COLOUR('',#279624); +#309660 = CURVE_STYLE('',#309661,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309662 = STYLED_ITEM('color',(#309663),#39330); +#309663 = PRESENTATION_STYLE_ASSIGNMENT((#309664,#309669)); +#309664 = SURFACE_STYLE_USAGE(.BOTH.,#309665); +#309665 = SURFACE_SIDE_STYLE('',(#309666)); +#309666 = SURFACE_STYLE_FILL_AREA(#309667); +#309667 = FILL_AREA_STYLE('',(#309668)); +#309668 = FILL_AREA_STYLE_COLOUR('',#279624); +#309669 = CURVE_STYLE('',#309670,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309671 = STYLED_ITEM('color',(#309672),#39347); +#309672 = PRESENTATION_STYLE_ASSIGNMENT((#309673,#309678)); +#309673 = SURFACE_STYLE_USAGE(.BOTH.,#309674); +#309674 = SURFACE_SIDE_STYLE('',(#309675)); +#309675 = SURFACE_STYLE_FILL_AREA(#309676); +#309676 = FILL_AREA_STYLE('',(#309677)); +#309677 = FILL_AREA_STYLE_COLOUR('',#282540); +#309678 = CURVE_STYLE('',#309679,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309680 = STYLED_ITEM('color',(#309681),#39392); +#309681 = PRESENTATION_STYLE_ASSIGNMENT((#309682,#309687)); +#309682 = SURFACE_STYLE_USAGE(.BOTH.,#309683); +#309683 = SURFACE_SIDE_STYLE('',(#309684)); +#309684 = SURFACE_STYLE_FILL_AREA(#309685); +#309685 = FILL_AREA_STYLE('',(#309686)); +#309686 = FILL_AREA_STYLE_COLOUR('',#279624); +#309687 = CURVE_STYLE('',#309688,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309689 = STYLED_ITEM('color',(#309690),#39478); +#309690 = PRESENTATION_STYLE_ASSIGNMENT((#309691,#309696)); +#309691 = SURFACE_STYLE_USAGE(.BOTH.,#309692); +#309692 = SURFACE_SIDE_STYLE('',(#309693)); +#309693 = SURFACE_STYLE_FILL_AREA(#309694); +#309694 = FILL_AREA_STYLE('',(#309695)); +#309695 = FILL_AREA_STYLE_COLOUR('',#279624); +#309696 = CURVE_STYLE('',#309697,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309698 = STYLED_ITEM('color',(#309699),#39501); +#309699 = PRESENTATION_STYLE_ASSIGNMENT((#309700,#309705)); +#309700 = SURFACE_STYLE_USAGE(.BOTH.,#309701); +#309701 = SURFACE_SIDE_STYLE('',(#309702)); +#309702 = SURFACE_STYLE_FILL_AREA(#309703); +#309703 = FILL_AREA_STYLE('',(#309704)); +#309704 = FILL_AREA_STYLE_COLOUR('',#279624); +#309705 = CURVE_STYLE('',#309706,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309707 = STYLED_ITEM('color',(#309708),#39524); +#309708 = PRESENTATION_STYLE_ASSIGNMENT((#309709,#309714)); +#309709 = SURFACE_STYLE_USAGE(.BOTH.,#309710); +#309710 = SURFACE_SIDE_STYLE('',(#309711)); +#309711 = SURFACE_STYLE_FILL_AREA(#309712); +#309712 = FILL_AREA_STYLE('',(#309713)); +#309713 = FILL_AREA_STYLE_COLOUR('',#279624); +#309714 = CURVE_STYLE('',#309715,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309716 = STYLED_ITEM('color',(#309717),#39547); +#309717 = PRESENTATION_STYLE_ASSIGNMENT((#309718,#309723)); +#309718 = SURFACE_STYLE_USAGE(.BOTH.,#309719); +#309719 = SURFACE_SIDE_STYLE('',(#309720)); +#309720 = SURFACE_STYLE_FILL_AREA(#309721); +#309721 = FILL_AREA_STYLE('',(#309722)); +#309722 = FILL_AREA_STYLE_COLOUR('',#279624); +#309723 = CURVE_STYLE('',#309724,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309725 = STYLED_ITEM('color',(#309726),#39634); +#309726 = PRESENTATION_STYLE_ASSIGNMENT((#309727,#309732)); +#309727 = SURFACE_STYLE_USAGE(.BOTH.,#309728); +#309728 = SURFACE_SIDE_STYLE('',(#309729)); +#309729 = SURFACE_STYLE_FILL_AREA(#309730); +#309730 = FILL_AREA_STYLE('',(#309731)); +#309731 = FILL_AREA_STYLE_COLOUR('',#282540); +#309732 = CURVE_STYLE('',#309733,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309734 = STYLED_ITEM('color',(#309735),#39672); +#309735 = PRESENTATION_STYLE_ASSIGNMENT((#309736,#309741)); +#309736 = SURFACE_STYLE_USAGE(.BOTH.,#309737); +#309737 = SURFACE_SIDE_STYLE('',(#309738)); +#309738 = SURFACE_STYLE_FILL_AREA(#309739); +#309739 = FILL_AREA_STYLE('',(#309740)); +#309740 = FILL_AREA_STYLE_COLOUR('',#279624); +#309741 = CURVE_STYLE('',#309742,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309743 = STYLED_ITEM('color',(#309744),#39721); +#309744 = PRESENTATION_STYLE_ASSIGNMENT((#309745,#309750)); +#309745 = SURFACE_STYLE_USAGE(.BOTH.,#309746); +#309746 = SURFACE_SIDE_STYLE('',(#309747)); +#309747 = SURFACE_STYLE_FILL_AREA(#309748); +#309748 = FILL_AREA_STYLE('',(#309749)); +#309749 = FILL_AREA_STYLE_COLOUR('',#282540); +#309750 = CURVE_STYLE('',#309751,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309752 = STYLED_ITEM('color',(#309753),#39813); +#309753 = PRESENTATION_STYLE_ASSIGNMENT((#309754,#309759)); +#309754 = SURFACE_STYLE_USAGE(.BOTH.,#309755); +#309755 = SURFACE_SIDE_STYLE('',(#309756)); +#309756 = SURFACE_STYLE_FILL_AREA(#309757); +#309757 = FILL_AREA_STYLE('',(#309758)); +#309758 = FILL_AREA_STYLE_COLOUR('',#282540); +#309759 = CURVE_STYLE('',#309760,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309761 = STYLED_ITEM('color',(#309762),#39838); +#309762 = PRESENTATION_STYLE_ASSIGNMENT((#309763,#309768)); +#309763 = SURFACE_STYLE_USAGE(.BOTH.,#309764); +#309764 = SURFACE_SIDE_STYLE('',(#309765)); +#309765 = SURFACE_STYLE_FILL_AREA(#309766); +#309766 = FILL_AREA_STYLE('',(#309767)); +#309767 = FILL_AREA_STYLE_COLOUR('',#282540); +#309768 = CURVE_STYLE('',#309769,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309770 = STYLED_ITEM('color',(#309771),#39922); +#309771 = PRESENTATION_STYLE_ASSIGNMENT((#309772,#309777)); +#309772 = SURFACE_STYLE_USAGE(.BOTH.,#309773); +#309773 = SURFACE_SIDE_STYLE('',(#309774)); +#309774 = SURFACE_STYLE_FILL_AREA(#309775); +#309775 = FILL_AREA_STYLE('',(#309776)); +#309776 = FILL_AREA_STYLE_COLOUR('',#279624); +#309777 = CURVE_STYLE('',#309778,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309779 = STYLED_ITEM('color',(#309780),#39944); +#309780 = PRESENTATION_STYLE_ASSIGNMENT((#309781,#309786)); +#309781 = SURFACE_STYLE_USAGE(.BOTH.,#309782); +#309782 = SURFACE_SIDE_STYLE('',(#309783)); +#309783 = SURFACE_STYLE_FILL_AREA(#309784); +#309784 = FILL_AREA_STYLE('',(#309785)); +#309785 = FILL_AREA_STYLE_COLOUR('',#282540); +#309786 = CURVE_STYLE('',#309787,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309788 = STYLED_ITEM('color',(#309789),#40036); +#309789 = PRESENTATION_STYLE_ASSIGNMENT((#309790,#309795)); +#309790 = SURFACE_STYLE_USAGE(.BOTH.,#309791); +#309791 = SURFACE_SIDE_STYLE('',(#309792)); +#309792 = SURFACE_STYLE_FILL_AREA(#309793); +#309793 = FILL_AREA_STYLE('',(#309794)); +#309794 = FILL_AREA_STYLE_COLOUR('',#282540); +#309795 = CURVE_STYLE('',#309796,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309797 = STYLED_ITEM('color',(#309798),#40061); +#309798 = PRESENTATION_STYLE_ASSIGNMENT((#309799,#309804)); +#309799 = SURFACE_STYLE_USAGE(.BOTH.,#309800); +#309800 = SURFACE_SIDE_STYLE('',(#309801)); +#309801 = SURFACE_STYLE_FILL_AREA(#309802); +#309802 = FILL_AREA_STYLE('',(#309803)); +#309803 = FILL_AREA_STYLE_COLOUR('',#282540); +#309804 = CURVE_STYLE('',#309805,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309806 = STYLED_ITEM('color',(#309807),#40145); +#309807 = PRESENTATION_STYLE_ASSIGNMENT((#309808,#309813)); +#309808 = SURFACE_STYLE_USAGE(.BOTH.,#309809); +#309809 = SURFACE_SIDE_STYLE('',(#309810)); +#309810 = SURFACE_STYLE_FILL_AREA(#309811); +#309811 = FILL_AREA_STYLE('',(#309812)); +#309812 = FILL_AREA_STYLE_COLOUR('',#279624); +#309813 = CURVE_STYLE('',#309814,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309815 = STYLED_ITEM('color',(#309816),#40167); +#309816 = PRESENTATION_STYLE_ASSIGNMENT((#309817,#309822)); +#309817 = SURFACE_STYLE_USAGE(.BOTH.,#309818); +#309818 = SURFACE_SIDE_STYLE('',(#309819)); +#309819 = SURFACE_STYLE_FILL_AREA(#309820); +#309820 = FILL_AREA_STYLE('',(#309821)); +#309821 = FILL_AREA_STYLE_COLOUR('',#282540); +#309822 = CURVE_STYLE('',#309823,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309824 = STYLED_ITEM('color',(#309825),#40259); +#309825 = PRESENTATION_STYLE_ASSIGNMENT((#309826,#309831)); +#309826 = SURFACE_STYLE_USAGE(.BOTH.,#309827); +#309827 = SURFACE_SIDE_STYLE('',(#309828)); +#309828 = SURFACE_STYLE_FILL_AREA(#309829); +#309829 = FILL_AREA_STYLE('',(#309830)); +#309830 = FILL_AREA_STYLE_COLOUR('',#282540); +#309831 = CURVE_STYLE('',#309832,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309833 = STYLED_ITEM('color',(#309834),#40284); +#309834 = PRESENTATION_STYLE_ASSIGNMENT((#309835,#309840)); +#309835 = SURFACE_STYLE_USAGE(.BOTH.,#309836); +#309836 = SURFACE_SIDE_STYLE('',(#309837)); +#309837 = SURFACE_STYLE_FILL_AREA(#309838); +#309838 = FILL_AREA_STYLE('',(#309839)); +#309839 = FILL_AREA_STYLE_COLOUR('',#282540); +#309840 = CURVE_STYLE('',#309841,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309842 = STYLED_ITEM('color',(#309843),#40368); +#309843 = PRESENTATION_STYLE_ASSIGNMENT((#309844,#309849)); +#309844 = SURFACE_STYLE_USAGE(.BOTH.,#309845); +#309845 = SURFACE_SIDE_STYLE('',(#309846)); +#309846 = SURFACE_STYLE_FILL_AREA(#309847); +#309847 = FILL_AREA_STYLE('',(#309848)); +#309848 = FILL_AREA_STYLE_COLOUR('',#279624); +#309849 = CURVE_STYLE('',#309850,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309851 = STYLED_ITEM('color',(#309852),#40385); +#309852 = PRESENTATION_STYLE_ASSIGNMENT((#309853,#309858)); +#309853 = SURFACE_STYLE_USAGE(.BOTH.,#309854); +#309854 = SURFACE_SIDE_STYLE('',(#309855)); +#309855 = SURFACE_STYLE_FILL_AREA(#309856); +#309856 = FILL_AREA_STYLE('',(#309857)); +#309857 = FILL_AREA_STYLE_COLOUR('',#282540); +#309858 = CURVE_STYLE('',#309859,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309860 = STYLED_ITEM('color',(#309861),#40470); +#309861 = PRESENTATION_STYLE_ASSIGNMENT((#309862,#309867)); +#309862 = SURFACE_STYLE_USAGE(.BOTH.,#309863); +#309863 = SURFACE_SIDE_STYLE('',(#309864)); +#309864 = SURFACE_STYLE_FILL_AREA(#309865); +#309865 = FILL_AREA_STYLE('',(#309866)); +#309866 = FILL_AREA_STYLE_COLOUR('',#282540); +#309867 = CURVE_STYLE('',#309868,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309869 = STYLED_ITEM('color',(#309870),#40495); +#309870 = PRESENTATION_STYLE_ASSIGNMENT((#309871,#309876)); +#309871 = SURFACE_STYLE_USAGE(.BOTH.,#309872); +#309872 = SURFACE_SIDE_STYLE('',(#309873)); +#309873 = SURFACE_STYLE_FILL_AREA(#309874); +#309874 = FILL_AREA_STYLE('',(#309875)); +#309875 = FILL_AREA_STYLE_COLOUR('',#282540); +#309876 = CURVE_STYLE('',#309877,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309878 = STYLED_ITEM('color',(#309879),#40572); +#309879 = PRESENTATION_STYLE_ASSIGNMENT((#309880,#309885)); +#309880 = SURFACE_STYLE_USAGE(.BOTH.,#309881); +#309881 = SURFACE_SIDE_STYLE('',(#309882)); +#309882 = SURFACE_STYLE_FILL_AREA(#309883); +#309883 = FILL_AREA_STYLE('',(#309884)); +#309884 = FILL_AREA_STYLE_COLOUR('',#282540); +#309885 = CURVE_STYLE('',#309886,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309887 = STYLED_ITEM('color',(#309888),#40657); +#309888 = PRESENTATION_STYLE_ASSIGNMENT((#309889,#309894)); +#309889 = SURFACE_STYLE_USAGE(.BOTH.,#309890); +#309890 = SURFACE_SIDE_STYLE('',(#309891)); +#309891 = SURFACE_STYLE_FILL_AREA(#309892); +#309892 = FILL_AREA_STYLE('',(#309893)); +#309893 = FILL_AREA_STYLE_COLOUR('',#282540); +#309894 = CURVE_STYLE('',#309895,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309896 = STYLED_ITEM('color',(#309897),#40682); +#309897 = PRESENTATION_STYLE_ASSIGNMENT((#309898,#309903)); +#309898 = SURFACE_STYLE_USAGE(.BOTH.,#309899); +#309899 = SURFACE_SIDE_STYLE('',(#309900)); +#309900 = SURFACE_STYLE_FILL_AREA(#309901); +#309901 = FILL_AREA_STYLE('',(#309902)); +#309902 = FILL_AREA_STYLE_COLOUR('',#282540); +#309903 = CURVE_STYLE('',#309904,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309905 = STYLED_ITEM('color',(#309906),#40759); +#309906 = PRESENTATION_STYLE_ASSIGNMENT((#309907,#309912)); +#309907 = SURFACE_STYLE_USAGE(.BOTH.,#309908); +#309908 = SURFACE_SIDE_STYLE('',(#309909)); +#309909 = SURFACE_STYLE_FILL_AREA(#309910); +#309910 = FILL_AREA_STYLE('',(#309911)); +#309911 = FILL_AREA_STYLE_COLOUR('',#279624); +#309912 = CURVE_STYLE('',#309913,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309914 = STYLED_ITEM('color',(#309915),#40776); +#309915 = PRESENTATION_STYLE_ASSIGNMENT((#309916,#309921)); +#309916 = SURFACE_STYLE_USAGE(.BOTH.,#309917); +#309917 = SURFACE_SIDE_STYLE('',(#309918)); +#309918 = SURFACE_STYLE_FILL_AREA(#309919); +#309919 = FILL_AREA_STYLE('',(#309920)); +#309920 = FILL_AREA_STYLE_COLOUR('',#282540); +#309921 = CURVE_STYLE('',#309922,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309923 = STYLED_ITEM('color',(#309924),#40868); +#309924 = PRESENTATION_STYLE_ASSIGNMENT((#309925,#309930)); +#309925 = SURFACE_STYLE_USAGE(.BOTH.,#309926); +#309926 = SURFACE_SIDE_STYLE('',(#309927)); +#309927 = SURFACE_STYLE_FILL_AREA(#309928); +#309928 = FILL_AREA_STYLE('',(#309929)); +#309929 = FILL_AREA_STYLE_COLOUR('',#282540); +#309930 = CURVE_STYLE('',#309931,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309932 = STYLED_ITEM('color',(#309933),#40893); +#309933 = PRESENTATION_STYLE_ASSIGNMENT((#309934,#309939)); +#309934 = SURFACE_STYLE_USAGE(.BOTH.,#309935); +#309935 = SURFACE_SIDE_STYLE('',(#309936)); +#309936 = SURFACE_STYLE_FILL_AREA(#309937); +#309937 = FILL_AREA_STYLE('',(#309938)); +#309938 = FILL_AREA_STYLE_COLOUR('',#282540); +#309939 = CURVE_STYLE('',#309940,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309941 = STYLED_ITEM('color',(#309942),#40977); +#309942 = PRESENTATION_STYLE_ASSIGNMENT((#309943,#309948)); +#309943 = SURFACE_STYLE_USAGE(.BOTH.,#309944); +#309944 = SURFACE_SIDE_STYLE('',(#309945)); +#309945 = SURFACE_STYLE_FILL_AREA(#309946); +#309946 = FILL_AREA_STYLE('',(#309947)); +#309947 = FILL_AREA_STYLE_COLOUR('',#279624); +#309948 = CURVE_STYLE('',#309949,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309950 = STYLED_ITEM('color',(#309951),#40999); +#309951 = PRESENTATION_STYLE_ASSIGNMENT((#309952,#309957)); +#309952 = SURFACE_STYLE_USAGE(.BOTH.,#309953); +#309953 = SURFACE_SIDE_STYLE('',(#309954)); +#309954 = SURFACE_STYLE_FILL_AREA(#309955); +#309955 = FILL_AREA_STYLE('',(#309956)); +#309956 = FILL_AREA_STYLE_COLOUR('',#282540); +#309957 = CURVE_STYLE('',#309958,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309959 = STYLED_ITEM('color',(#309960),#41091); +#309960 = PRESENTATION_STYLE_ASSIGNMENT((#309961,#309966)); +#309961 = SURFACE_STYLE_USAGE(.BOTH.,#309962); +#309962 = SURFACE_SIDE_STYLE('',(#309963)); +#309963 = SURFACE_STYLE_FILL_AREA(#309964); +#309964 = FILL_AREA_STYLE('',(#309965)); +#309965 = FILL_AREA_STYLE_COLOUR('',#282540); +#309966 = CURVE_STYLE('',#309967,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309968 = STYLED_ITEM('color',(#309969),#41116); +#309969 = PRESENTATION_STYLE_ASSIGNMENT((#309970,#309975)); +#309970 = SURFACE_STYLE_USAGE(.BOTH.,#309971); +#309971 = SURFACE_SIDE_STYLE('',(#309972)); +#309972 = SURFACE_STYLE_FILL_AREA(#309973); +#309973 = FILL_AREA_STYLE('',(#309974)); +#309974 = FILL_AREA_STYLE_COLOUR('',#282540); +#309975 = CURVE_STYLE('',#309976,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309977 = STYLED_ITEM('color',(#309978),#41200); +#309978 = PRESENTATION_STYLE_ASSIGNMENT((#309979,#309984)); +#309979 = SURFACE_STYLE_USAGE(.BOTH.,#309980); +#309980 = SURFACE_SIDE_STYLE('',(#309981)); +#309981 = SURFACE_STYLE_FILL_AREA(#309982); +#309982 = FILL_AREA_STYLE('',(#309983)); +#309983 = FILL_AREA_STYLE_COLOUR('',#279624); +#309984 = CURVE_STYLE('',#309985,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#309985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309986 = STYLED_ITEM('color',(#309987),#41222); +#309987 = PRESENTATION_STYLE_ASSIGNMENT((#309988,#309993)); +#309988 = SURFACE_STYLE_USAGE(.BOTH.,#309989); +#309989 = SURFACE_SIDE_STYLE('',(#309990)); +#309990 = SURFACE_STYLE_FILL_AREA(#309991); +#309991 = FILL_AREA_STYLE('',(#309992)); +#309992 = FILL_AREA_STYLE_COLOUR('',#282540); +#309993 = CURVE_STYLE('',#309994,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#309994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309995 = STYLED_ITEM('color',(#309996),#41314); +#309996 = PRESENTATION_STYLE_ASSIGNMENT((#309997,#310002)); +#309997 = SURFACE_STYLE_USAGE(.BOTH.,#309998); +#309998 = SURFACE_SIDE_STYLE('',(#309999)); +#309999 = SURFACE_STYLE_FILL_AREA(#310000); +#310000 = FILL_AREA_STYLE('',(#310001)); +#310001 = FILL_AREA_STYLE_COLOUR('',#282540); +#310002 = CURVE_STYLE('',#310003,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310004 = STYLED_ITEM('color',(#310005),#41339); +#310005 = PRESENTATION_STYLE_ASSIGNMENT((#310006,#310011)); +#310006 = SURFACE_STYLE_USAGE(.BOTH.,#310007); +#310007 = SURFACE_SIDE_STYLE('',(#310008)); +#310008 = SURFACE_STYLE_FILL_AREA(#310009); +#310009 = FILL_AREA_STYLE('',(#310010)); +#310010 = FILL_AREA_STYLE_COLOUR('',#282540); +#310011 = CURVE_STYLE('',#310012,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310013 = STYLED_ITEM('color',(#310014),#41423); +#310014 = PRESENTATION_STYLE_ASSIGNMENT((#310015,#310020)); +#310015 = SURFACE_STYLE_USAGE(.BOTH.,#310016); +#310016 = SURFACE_SIDE_STYLE('',(#310017)); +#310017 = SURFACE_STYLE_FILL_AREA(#310018); +#310018 = FILL_AREA_STYLE('',(#310019)); +#310019 = FILL_AREA_STYLE_COLOUR('',#282540); +#310020 = CURVE_STYLE('',#310021,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310022 = STYLED_ITEM('color',(#310023),#41440); +#310023 = PRESENTATION_STYLE_ASSIGNMENT((#310024,#310029)); +#310024 = SURFACE_STYLE_USAGE(.BOTH.,#310025); +#310025 = SURFACE_SIDE_STYLE('',(#310026)); +#310026 = SURFACE_STYLE_FILL_AREA(#310027); +#310027 = FILL_AREA_STYLE('',(#310028)); +#310028 = FILL_AREA_STYLE_COLOUR('',#282540); +#310029 = CURVE_STYLE('',#310030,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310031 = STYLED_ITEM('color',(#310032),#41459); +#310032 = PRESENTATION_STYLE_ASSIGNMENT((#310033,#310038)); +#310033 = SURFACE_STYLE_USAGE(.BOTH.,#310034); +#310034 = SURFACE_SIDE_STYLE('',(#310035)); +#310035 = SURFACE_STYLE_FILL_AREA(#310036); +#310036 = FILL_AREA_STYLE('',(#310037)); +#310037 = FILL_AREA_STYLE_COLOUR('',#282540); +#310038 = CURVE_STYLE('',#310039,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310040 = STYLED_ITEM('color',(#310041),#41478); +#310041 = PRESENTATION_STYLE_ASSIGNMENT((#310042,#310047)); +#310042 = SURFACE_STYLE_USAGE(.BOTH.,#310043); +#310043 = SURFACE_SIDE_STYLE('',(#310044)); +#310044 = SURFACE_STYLE_FILL_AREA(#310045); +#310045 = FILL_AREA_STYLE('',(#310046)); +#310046 = FILL_AREA_STYLE_COLOUR('',#282540); +#310047 = CURVE_STYLE('',#310048,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310049 = STYLED_ITEM('color',(#310050),#41497); +#310050 = PRESENTATION_STYLE_ASSIGNMENT((#310051,#310056)); +#310051 = SURFACE_STYLE_USAGE(.BOTH.,#310052); +#310052 = SURFACE_SIDE_STYLE('',(#310053)); +#310053 = SURFACE_STYLE_FILL_AREA(#310054); +#310054 = FILL_AREA_STYLE('',(#310055)); +#310055 = FILL_AREA_STYLE_COLOUR('',#279624); +#310056 = CURVE_STYLE('',#310057,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310058 = STYLED_ITEM('color',(#310059),#41543); +#310059 = PRESENTATION_STYLE_ASSIGNMENT((#310060,#310065)); +#310060 = SURFACE_STYLE_USAGE(.BOTH.,#310061); +#310061 = SURFACE_SIDE_STYLE('',(#310062)); +#310062 = SURFACE_STYLE_FILL_AREA(#310063); +#310063 = FILL_AREA_STYLE('',(#310064)); +#310064 = FILL_AREA_STYLE_COLOUR('',#279624); +#310065 = CURVE_STYLE('',#310066,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310067 = STYLED_ITEM('color',(#310068),#41559); +#310068 = PRESENTATION_STYLE_ASSIGNMENT((#310069,#310074)); +#310069 = SURFACE_STYLE_USAGE(.BOTH.,#310070); +#310070 = SURFACE_SIDE_STYLE('',(#310071)); +#310071 = SURFACE_STYLE_FILL_AREA(#310072); +#310072 = FILL_AREA_STYLE('',(#310073)); +#310073 = FILL_AREA_STYLE_COLOUR('',#282540); +#310074 = CURVE_STYLE('',#310075,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310076 = STYLED_ITEM('color',(#310077),#41578); +#310077 = PRESENTATION_STYLE_ASSIGNMENT((#310078,#310083)); +#310078 = SURFACE_STYLE_USAGE(.BOTH.,#310079); +#310079 = SURFACE_SIDE_STYLE('',(#310080)); +#310080 = SURFACE_STYLE_FILL_AREA(#310081); +#310081 = FILL_AREA_STYLE('',(#310082)); +#310082 = FILL_AREA_STYLE_COLOUR('',#282540); +#310083 = CURVE_STYLE('',#310084,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310085 = STYLED_ITEM('color',(#310086),#41597); +#310086 = PRESENTATION_STYLE_ASSIGNMENT((#310087,#310092)); +#310087 = SURFACE_STYLE_USAGE(.BOTH.,#310088); +#310088 = SURFACE_SIDE_STYLE('',(#310089)); +#310089 = SURFACE_STYLE_FILL_AREA(#310090); +#310090 = FILL_AREA_STYLE('',(#310091)); +#310091 = FILL_AREA_STYLE_COLOUR('',#282540); +#310092 = CURVE_STYLE('',#310093,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310094 = STYLED_ITEM('color',(#310095),#41616); +#310095 = PRESENTATION_STYLE_ASSIGNMENT((#310096,#310101)); +#310096 = SURFACE_STYLE_USAGE(.BOTH.,#310097); +#310097 = SURFACE_SIDE_STYLE('',(#310098)); +#310098 = SURFACE_STYLE_FILL_AREA(#310099); +#310099 = FILL_AREA_STYLE('',(#310100)); +#310100 = FILL_AREA_STYLE_COLOUR('',#279624); +#310101 = CURVE_STYLE('',#310102,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310103 = STYLED_ITEM('color',(#310104),#41632); +#310104 = PRESENTATION_STYLE_ASSIGNMENT((#310105,#310110)); +#310105 = SURFACE_STYLE_USAGE(.BOTH.,#310106); +#310106 = SURFACE_SIDE_STYLE('',(#310107)); +#310107 = SURFACE_STYLE_FILL_AREA(#310108); +#310108 = FILL_AREA_STYLE('',(#310109)); +#310109 = FILL_AREA_STYLE_COLOUR('',#282540); +#310110 = CURVE_STYLE('',#310111,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310112 = STYLED_ITEM('color',(#310113),#41649); +#310113 = PRESENTATION_STYLE_ASSIGNMENT((#310114,#310119)); +#310114 = SURFACE_STYLE_USAGE(.BOTH.,#310115); +#310115 = SURFACE_SIDE_STYLE('',(#310116)); +#310116 = SURFACE_STYLE_FILL_AREA(#310117); +#310117 = FILL_AREA_STYLE('',(#310118)); +#310118 = FILL_AREA_STYLE_COLOUR('',#279624); +#310119 = CURVE_STYLE('',#310120,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310121 = STYLED_ITEM('color',(#310122),#41661); +#310122 = PRESENTATION_STYLE_ASSIGNMENT((#310123,#310128)); +#310123 = SURFACE_STYLE_USAGE(.BOTH.,#310124); +#310124 = SURFACE_SIDE_STYLE('',(#310125)); +#310125 = SURFACE_STYLE_FILL_AREA(#310126); +#310126 = FILL_AREA_STYLE('',(#310127)); +#310127 = FILL_AREA_STYLE_COLOUR('',#282540); +#310128 = CURVE_STYLE('',#310129,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310130 = STYLED_ITEM('color',(#310131),#41678); +#310131 = PRESENTATION_STYLE_ASSIGNMENT((#310132,#310137)); +#310132 = SURFACE_STYLE_USAGE(.BOTH.,#310133); +#310133 = SURFACE_SIDE_STYLE('',(#310134)); +#310134 = SURFACE_STYLE_FILL_AREA(#310135); +#310135 = FILL_AREA_STYLE('',(#310136)); +#310136 = FILL_AREA_STYLE_COLOUR('',#282540); +#310137 = CURVE_STYLE('',#310138,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310139 = STYLED_ITEM('color',(#310140),#41695); +#310140 = PRESENTATION_STYLE_ASSIGNMENT((#310141,#310146)); +#310141 = SURFACE_STYLE_USAGE(.BOTH.,#310142); +#310142 = SURFACE_SIDE_STYLE('',(#310143)); +#310143 = SURFACE_STYLE_FILL_AREA(#310144); +#310144 = FILL_AREA_STYLE('',(#310145)); +#310145 = FILL_AREA_STYLE_COLOUR('',#282540); +#310146 = CURVE_STYLE('',#310147,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310148 = STYLED_ITEM('color',(#310149),#41712); +#310149 = PRESENTATION_STYLE_ASSIGNMENT((#310150,#310155)); +#310150 = SURFACE_STYLE_USAGE(.BOTH.,#310151); +#310151 = SURFACE_SIDE_STYLE('',(#310152)); +#310152 = SURFACE_STYLE_FILL_AREA(#310153); +#310153 = FILL_AREA_STYLE('',(#310154)); +#310154 = FILL_AREA_STYLE_COLOUR('',#282540); +#310155 = CURVE_STYLE('',#310156,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310157 = STYLED_ITEM('color',(#310158),#41729); +#310158 = PRESENTATION_STYLE_ASSIGNMENT((#310159,#310164)); +#310159 = SURFACE_STYLE_USAGE(.BOTH.,#310160); +#310160 = SURFACE_SIDE_STYLE('',(#310161)); +#310161 = SURFACE_STYLE_FILL_AREA(#310162); +#310162 = FILL_AREA_STYLE('',(#310163)); +#310163 = FILL_AREA_STYLE_COLOUR('',#282540); +#310164 = CURVE_STYLE('',#310165,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310166 = STYLED_ITEM('color',(#310167),#41746); +#310167 = PRESENTATION_STYLE_ASSIGNMENT((#310168,#310173)); +#310168 = SURFACE_STYLE_USAGE(.BOTH.,#310169); +#310169 = SURFACE_SIDE_STYLE('',(#310170)); +#310170 = SURFACE_STYLE_FILL_AREA(#310171); +#310171 = FILL_AREA_STYLE('',(#310172)); +#310172 = FILL_AREA_STYLE_COLOUR('',#282540); +#310173 = CURVE_STYLE('',#310174,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310175 = STYLED_ITEM('color',(#310176),#41763); +#310176 = PRESENTATION_STYLE_ASSIGNMENT((#310177,#310182)); +#310177 = SURFACE_STYLE_USAGE(.BOTH.,#310178); +#310178 = SURFACE_SIDE_STYLE('',(#310179)); +#310179 = SURFACE_STYLE_FILL_AREA(#310180); +#310180 = FILL_AREA_STYLE('',(#310181)); +#310181 = FILL_AREA_STYLE_COLOUR('',#282540); +#310182 = CURVE_STYLE('',#310183,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310184 = STYLED_ITEM('color',(#310185),#41780); +#310185 = PRESENTATION_STYLE_ASSIGNMENT((#310186,#310191)); +#310186 = SURFACE_STYLE_USAGE(.BOTH.,#310187); +#310187 = SURFACE_SIDE_STYLE('',(#310188)); +#310188 = SURFACE_STYLE_FILL_AREA(#310189); +#310189 = FILL_AREA_STYLE('',(#310190)); +#310190 = FILL_AREA_STYLE_COLOUR('',#282540); +#310191 = CURVE_STYLE('',#310192,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310193 = STYLED_ITEM('color',(#310194),#41792); +#310194 = PRESENTATION_STYLE_ASSIGNMENT((#310195,#310200)); +#310195 = SURFACE_STYLE_USAGE(.BOTH.,#310196); +#310196 = SURFACE_SIDE_STYLE('',(#310197)); +#310197 = SURFACE_STYLE_FILL_AREA(#310198); +#310198 = FILL_AREA_STYLE('',(#310199)); +#310199 = FILL_AREA_STYLE_COLOUR('',#282540); +#310200 = CURVE_STYLE('',#310201,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310202 = STYLED_ITEM('color',(#310203),#41809); +#310203 = PRESENTATION_STYLE_ASSIGNMENT((#310204,#310209)); +#310204 = SURFACE_STYLE_USAGE(.BOTH.,#310205); +#310205 = SURFACE_SIDE_STYLE('',(#310206)); +#310206 = SURFACE_STYLE_FILL_AREA(#310207); +#310207 = FILL_AREA_STYLE('',(#310208)); +#310208 = FILL_AREA_STYLE_COLOUR('',#282540); +#310209 = CURVE_STYLE('',#310210,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310211 = STYLED_ITEM('color',(#310212),#41826); +#310212 = PRESENTATION_STYLE_ASSIGNMENT((#310213,#310218)); +#310213 = SURFACE_STYLE_USAGE(.BOTH.,#310214); +#310214 = SURFACE_SIDE_STYLE('',(#310215)); +#310215 = SURFACE_STYLE_FILL_AREA(#310216); +#310216 = FILL_AREA_STYLE('',(#310217)); +#310217 = FILL_AREA_STYLE_COLOUR('',#282540); +#310218 = CURVE_STYLE('',#310219,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310220 = STYLED_ITEM('color',(#310221),#41843); +#310221 = PRESENTATION_STYLE_ASSIGNMENT((#310222,#310227)); +#310222 = SURFACE_STYLE_USAGE(.BOTH.,#310223); +#310223 = SURFACE_SIDE_STYLE('',(#310224)); +#310224 = SURFACE_STYLE_FILL_AREA(#310225); +#310225 = FILL_AREA_STYLE('',(#310226)); +#310226 = FILL_AREA_STYLE_COLOUR('',#282540); +#310227 = CURVE_STYLE('',#310228,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310229 = STYLED_ITEM('color',(#310230),#41860); +#310230 = PRESENTATION_STYLE_ASSIGNMENT((#310231,#310236)); +#310231 = SURFACE_STYLE_USAGE(.BOTH.,#310232); +#310232 = SURFACE_SIDE_STYLE('',(#310233)); +#310233 = SURFACE_STYLE_FILL_AREA(#310234); +#310234 = FILL_AREA_STYLE('',(#310235)); +#310235 = FILL_AREA_STYLE_COLOUR('',#282540); +#310236 = CURVE_STYLE('',#310237,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310238 = STYLED_ITEM('color',(#310239),#41877); +#310239 = PRESENTATION_STYLE_ASSIGNMENT((#310240,#310245)); +#310240 = SURFACE_STYLE_USAGE(.BOTH.,#310241); +#310241 = SURFACE_SIDE_STYLE('',(#310242)); +#310242 = SURFACE_STYLE_FILL_AREA(#310243); +#310243 = FILL_AREA_STYLE('',(#310244)); +#310244 = FILL_AREA_STYLE_COLOUR('',#282540); +#310245 = CURVE_STYLE('',#310246,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310247 = STYLED_ITEM('color',(#310248),#41894); +#310248 = PRESENTATION_STYLE_ASSIGNMENT((#310249,#310254)); +#310249 = SURFACE_STYLE_USAGE(.BOTH.,#310250); +#310250 = SURFACE_SIDE_STYLE('',(#310251)); +#310251 = SURFACE_STYLE_FILL_AREA(#310252); +#310252 = FILL_AREA_STYLE('',(#310253)); +#310253 = FILL_AREA_STYLE_COLOUR('',#282540); +#310254 = CURVE_STYLE('',#310255,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310256 = STYLED_ITEM('color',(#310257),#41911); +#310257 = PRESENTATION_STYLE_ASSIGNMENT((#310258,#310263)); +#310258 = SURFACE_STYLE_USAGE(.BOTH.,#310259); +#310259 = SURFACE_SIDE_STYLE('',(#310260)); +#310260 = SURFACE_STYLE_FILL_AREA(#310261); +#310261 = FILL_AREA_STYLE('',(#310262)); +#310262 = FILL_AREA_STYLE_COLOUR('',#282540); +#310263 = CURVE_STYLE('',#310264,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310265 = STYLED_ITEM('color',(#310266),#41923); +#310266 = PRESENTATION_STYLE_ASSIGNMENT((#310267,#310272)); +#310267 = SURFACE_STYLE_USAGE(.BOTH.,#310268); +#310268 = SURFACE_SIDE_STYLE('',(#310269)); +#310269 = SURFACE_STYLE_FILL_AREA(#310270); +#310270 = FILL_AREA_STYLE('',(#310271)); +#310271 = FILL_AREA_STYLE_COLOUR('',#282540); +#310272 = CURVE_STYLE('',#310273,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310274 = STYLED_ITEM('color',(#310275),#41940); +#310275 = PRESENTATION_STYLE_ASSIGNMENT((#310276,#310281)); +#310276 = SURFACE_STYLE_USAGE(.BOTH.,#310277); +#310277 = SURFACE_SIDE_STYLE('',(#310278)); +#310278 = SURFACE_STYLE_FILL_AREA(#310279); +#310279 = FILL_AREA_STYLE('',(#310280)); +#310280 = FILL_AREA_STYLE_COLOUR('',#282540); +#310281 = CURVE_STYLE('',#310282,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310283 = STYLED_ITEM('color',(#310284),#41957); +#310284 = PRESENTATION_STYLE_ASSIGNMENT((#310285,#310290)); +#310285 = SURFACE_STYLE_USAGE(.BOTH.,#310286); +#310286 = SURFACE_SIDE_STYLE('',(#310287)); +#310287 = SURFACE_STYLE_FILL_AREA(#310288); +#310288 = FILL_AREA_STYLE('',(#310289)); +#310289 = FILL_AREA_STYLE_COLOUR('',#282540); +#310290 = CURVE_STYLE('',#310291,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310292 = STYLED_ITEM('color',(#310293),#41974); +#310293 = PRESENTATION_STYLE_ASSIGNMENT((#310294,#310299)); +#310294 = SURFACE_STYLE_USAGE(.BOTH.,#310295); +#310295 = SURFACE_SIDE_STYLE('',(#310296)); +#310296 = SURFACE_STYLE_FILL_AREA(#310297); +#310297 = FILL_AREA_STYLE('',(#310298)); +#310298 = FILL_AREA_STYLE_COLOUR('',#282540); +#310299 = CURVE_STYLE('',#310300,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310301 = STYLED_ITEM('color',(#310302),#41991); +#310302 = PRESENTATION_STYLE_ASSIGNMENT((#310303,#310308)); +#310303 = SURFACE_STYLE_USAGE(.BOTH.,#310304); +#310304 = SURFACE_SIDE_STYLE('',(#310305)); +#310305 = SURFACE_STYLE_FILL_AREA(#310306); +#310306 = FILL_AREA_STYLE('',(#310307)); +#310307 = FILL_AREA_STYLE_COLOUR('',#282540); +#310308 = CURVE_STYLE('',#310309,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310310 = STYLED_ITEM('color',(#310311),#42008); +#310311 = PRESENTATION_STYLE_ASSIGNMENT((#310312,#310317)); +#310312 = SURFACE_STYLE_USAGE(.BOTH.,#310313); +#310313 = SURFACE_SIDE_STYLE('',(#310314)); +#310314 = SURFACE_STYLE_FILL_AREA(#310315); +#310315 = FILL_AREA_STYLE('',(#310316)); +#310316 = FILL_AREA_STYLE_COLOUR('',#282540); +#310317 = CURVE_STYLE('',#310318,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310319 = STYLED_ITEM('color',(#310320),#42025); +#310320 = PRESENTATION_STYLE_ASSIGNMENT((#310321,#310326)); +#310321 = SURFACE_STYLE_USAGE(.BOTH.,#310322); +#310322 = SURFACE_SIDE_STYLE('',(#310323)); +#310323 = SURFACE_STYLE_FILL_AREA(#310324); +#310324 = FILL_AREA_STYLE('',(#310325)); +#310325 = FILL_AREA_STYLE_COLOUR('',#282540); +#310326 = CURVE_STYLE('',#310327,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310328 = STYLED_ITEM('color',(#310329),#42042); +#310329 = PRESENTATION_STYLE_ASSIGNMENT((#310330,#310335)); +#310330 = SURFACE_STYLE_USAGE(.BOTH.,#310331); +#310331 = SURFACE_SIDE_STYLE('',(#310332)); +#310332 = SURFACE_STYLE_FILL_AREA(#310333); +#310333 = FILL_AREA_STYLE('',(#310334)); +#310334 = FILL_AREA_STYLE_COLOUR('',#282540); +#310335 = CURVE_STYLE('',#310336,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310337 = STYLED_ITEM('color',(#310338),#42054); +#310338 = PRESENTATION_STYLE_ASSIGNMENT((#310339,#310344)); +#310339 = SURFACE_STYLE_USAGE(.BOTH.,#310340); +#310340 = SURFACE_SIDE_STYLE('',(#310341)); +#310341 = SURFACE_STYLE_FILL_AREA(#310342); +#310342 = FILL_AREA_STYLE('',(#310343)); +#310343 = FILL_AREA_STYLE_COLOUR('',#282540); +#310344 = CURVE_STYLE('',#310345,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310346 = STYLED_ITEM('color',(#310347),#42071); +#310347 = PRESENTATION_STYLE_ASSIGNMENT((#310348,#310353)); +#310348 = SURFACE_STYLE_USAGE(.BOTH.,#310349); +#310349 = SURFACE_SIDE_STYLE('',(#310350)); +#310350 = SURFACE_STYLE_FILL_AREA(#310351); +#310351 = FILL_AREA_STYLE('',(#310352)); +#310352 = FILL_AREA_STYLE_COLOUR('',#282540); +#310353 = CURVE_STYLE('',#310354,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310355 = STYLED_ITEM('color',(#310356),#42088); +#310356 = PRESENTATION_STYLE_ASSIGNMENT((#310357,#310362)); +#310357 = SURFACE_STYLE_USAGE(.BOTH.,#310358); +#310358 = SURFACE_SIDE_STYLE('',(#310359)); +#310359 = SURFACE_STYLE_FILL_AREA(#310360); +#310360 = FILL_AREA_STYLE('',(#310361)); +#310361 = FILL_AREA_STYLE_COLOUR('',#282540); +#310362 = CURVE_STYLE('',#310363,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310364 = STYLED_ITEM('color',(#310365),#42105); +#310365 = PRESENTATION_STYLE_ASSIGNMENT((#310366,#310371)); +#310366 = SURFACE_STYLE_USAGE(.BOTH.,#310367); +#310367 = SURFACE_SIDE_STYLE('',(#310368)); +#310368 = SURFACE_STYLE_FILL_AREA(#310369); +#310369 = FILL_AREA_STYLE('',(#310370)); +#310370 = FILL_AREA_STYLE_COLOUR('',#282540); +#310371 = CURVE_STYLE('',#310372,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310373 = STYLED_ITEM('color',(#310374),#42122); +#310374 = PRESENTATION_STYLE_ASSIGNMENT((#310375,#310380)); +#310375 = SURFACE_STYLE_USAGE(.BOTH.,#310376); +#310376 = SURFACE_SIDE_STYLE('',(#310377)); +#310377 = SURFACE_STYLE_FILL_AREA(#310378); +#310378 = FILL_AREA_STYLE('',(#310379)); +#310379 = FILL_AREA_STYLE_COLOUR('',#282540); +#310380 = CURVE_STYLE('',#310381,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310382 = STYLED_ITEM('color',(#310383),#42139); +#310383 = PRESENTATION_STYLE_ASSIGNMENT((#310384,#310389)); +#310384 = SURFACE_STYLE_USAGE(.BOTH.,#310385); +#310385 = SURFACE_SIDE_STYLE('',(#310386)); +#310386 = SURFACE_STYLE_FILL_AREA(#310387); +#310387 = FILL_AREA_STYLE('',(#310388)); +#310388 = FILL_AREA_STYLE_COLOUR('',#282540); +#310389 = CURVE_STYLE('',#310390,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310391 = STYLED_ITEM('color',(#310392),#42156); +#310392 = PRESENTATION_STYLE_ASSIGNMENT((#310393,#310398)); +#310393 = SURFACE_STYLE_USAGE(.BOTH.,#310394); +#310394 = SURFACE_SIDE_STYLE('',(#310395)); +#310395 = SURFACE_STYLE_FILL_AREA(#310396); +#310396 = FILL_AREA_STYLE('',(#310397)); +#310397 = FILL_AREA_STYLE_COLOUR('',#282540); +#310398 = CURVE_STYLE('',#310399,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310400 = STYLED_ITEM('color',(#310401),#42168); +#310401 = PRESENTATION_STYLE_ASSIGNMENT((#310402,#310407)); +#310402 = SURFACE_STYLE_USAGE(.BOTH.,#310403); +#310403 = SURFACE_SIDE_STYLE('',(#310404)); +#310404 = SURFACE_STYLE_FILL_AREA(#310405); +#310405 = FILL_AREA_STYLE('',(#310406)); +#310406 = FILL_AREA_STYLE_COLOUR('',#282540); +#310407 = CURVE_STYLE('',#310408,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310409 = STYLED_ITEM('color',(#310410),#42185); +#310410 = PRESENTATION_STYLE_ASSIGNMENT((#310411,#310416)); +#310411 = SURFACE_STYLE_USAGE(.BOTH.,#310412); +#310412 = SURFACE_SIDE_STYLE('',(#310413)); +#310413 = SURFACE_STYLE_FILL_AREA(#310414); +#310414 = FILL_AREA_STYLE('',(#310415)); +#310415 = FILL_AREA_STYLE_COLOUR('',#282540); +#310416 = CURVE_STYLE('',#310417,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310418 = STYLED_ITEM('color',(#310419),#42202); +#310419 = PRESENTATION_STYLE_ASSIGNMENT((#310420,#310425)); +#310420 = SURFACE_STYLE_USAGE(.BOTH.,#310421); +#310421 = SURFACE_SIDE_STYLE('',(#310422)); +#310422 = SURFACE_STYLE_FILL_AREA(#310423); +#310423 = FILL_AREA_STYLE('',(#310424)); +#310424 = FILL_AREA_STYLE_COLOUR('',#282540); +#310425 = CURVE_STYLE('',#310426,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310427 = STYLED_ITEM('color',(#310428),#42219); +#310428 = PRESENTATION_STYLE_ASSIGNMENT((#310429,#310434)); +#310429 = SURFACE_STYLE_USAGE(.BOTH.,#310430); +#310430 = SURFACE_SIDE_STYLE('',(#310431)); +#310431 = SURFACE_STYLE_FILL_AREA(#310432); +#310432 = FILL_AREA_STYLE('',(#310433)); +#310433 = FILL_AREA_STYLE_COLOUR('',#282540); +#310434 = CURVE_STYLE('',#310435,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310436 = STYLED_ITEM('color',(#310437),#42236); +#310437 = PRESENTATION_STYLE_ASSIGNMENT((#310438,#310443)); +#310438 = SURFACE_STYLE_USAGE(.BOTH.,#310439); +#310439 = SURFACE_SIDE_STYLE('',(#310440)); +#310440 = SURFACE_STYLE_FILL_AREA(#310441); +#310441 = FILL_AREA_STYLE('',(#310442)); +#310442 = FILL_AREA_STYLE_COLOUR('',#282540); +#310443 = CURVE_STYLE('',#310444,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310445 = STYLED_ITEM('color',(#310446),#42253); +#310446 = PRESENTATION_STYLE_ASSIGNMENT((#310447,#310452)); +#310447 = SURFACE_STYLE_USAGE(.BOTH.,#310448); +#310448 = SURFACE_SIDE_STYLE('',(#310449)); +#310449 = SURFACE_STYLE_FILL_AREA(#310450); +#310450 = FILL_AREA_STYLE('',(#310451)); +#310451 = FILL_AREA_STYLE_COLOUR('',#282540); +#310452 = CURVE_STYLE('',#310453,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310454 = STYLED_ITEM('color',(#310455),#42270); +#310455 = PRESENTATION_STYLE_ASSIGNMENT((#310456,#310461)); +#310456 = SURFACE_STYLE_USAGE(.BOTH.,#310457); +#310457 = SURFACE_SIDE_STYLE('',(#310458)); +#310458 = SURFACE_STYLE_FILL_AREA(#310459); +#310459 = FILL_AREA_STYLE('',(#310460)); +#310460 = FILL_AREA_STYLE_COLOUR('',#282540); +#310461 = CURVE_STYLE('',#310462,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310463 = STYLED_ITEM('color',(#310464),#42282); +#310464 = PRESENTATION_STYLE_ASSIGNMENT((#310465,#310470)); +#310465 = SURFACE_STYLE_USAGE(.BOTH.,#310466); +#310466 = SURFACE_SIDE_STYLE('',(#310467)); +#310467 = SURFACE_STYLE_FILL_AREA(#310468); +#310468 = FILL_AREA_STYLE('',(#310469)); +#310469 = FILL_AREA_STYLE_COLOUR('',#282540); +#310470 = CURVE_STYLE('',#310471,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310472 = STYLED_ITEM('color',(#310473),#42299); +#310473 = PRESENTATION_STYLE_ASSIGNMENT((#310474,#310479)); +#310474 = SURFACE_STYLE_USAGE(.BOTH.,#310475); +#310475 = SURFACE_SIDE_STYLE('',(#310476)); +#310476 = SURFACE_STYLE_FILL_AREA(#310477); +#310477 = FILL_AREA_STYLE('',(#310478)); +#310478 = FILL_AREA_STYLE_COLOUR('',#282540); +#310479 = CURVE_STYLE('',#310480,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310481 = STYLED_ITEM('color',(#310482),#42316); +#310482 = PRESENTATION_STYLE_ASSIGNMENT((#310483,#310488)); +#310483 = SURFACE_STYLE_USAGE(.BOTH.,#310484); +#310484 = SURFACE_SIDE_STYLE('',(#310485)); +#310485 = SURFACE_STYLE_FILL_AREA(#310486); +#310486 = FILL_AREA_STYLE('',(#310487)); +#310487 = FILL_AREA_STYLE_COLOUR('',#282540); +#310488 = CURVE_STYLE('',#310489,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310490 = STYLED_ITEM('color',(#310491),#42333); +#310491 = PRESENTATION_STYLE_ASSIGNMENT((#310492,#310497)); +#310492 = SURFACE_STYLE_USAGE(.BOTH.,#310493); +#310493 = SURFACE_SIDE_STYLE('',(#310494)); +#310494 = SURFACE_STYLE_FILL_AREA(#310495); +#310495 = FILL_AREA_STYLE('',(#310496)); +#310496 = FILL_AREA_STYLE_COLOUR('',#282540); +#310497 = CURVE_STYLE('',#310498,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310499 = STYLED_ITEM('color',(#310500),#42350); +#310500 = PRESENTATION_STYLE_ASSIGNMENT((#310501,#310506)); +#310501 = SURFACE_STYLE_USAGE(.BOTH.,#310502); +#310502 = SURFACE_SIDE_STYLE('',(#310503)); +#310503 = SURFACE_STYLE_FILL_AREA(#310504); +#310504 = FILL_AREA_STYLE('',(#310505)); +#310505 = FILL_AREA_STYLE_COLOUR('',#282540); +#310506 = CURVE_STYLE('',#310507,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310508 = STYLED_ITEM('color',(#310509),#42367); +#310509 = PRESENTATION_STYLE_ASSIGNMENT((#310510,#310515)); +#310510 = SURFACE_STYLE_USAGE(.BOTH.,#310511); +#310511 = SURFACE_SIDE_STYLE('',(#310512)); +#310512 = SURFACE_STYLE_FILL_AREA(#310513); +#310513 = FILL_AREA_STYLE('',(#310514)); +#310514 = FILL_AREA_STYLE_COLOUR('',#282540); +#310515 = CURVE_STYLE('',#310516,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310517 = STYLED_ITEM('color',(#310518),#42384); +#310518 = PRESENTATION_STYLE_ASSIGNMENT((#310519,#310524)); +#310519 = SURFACE_STYLE_USAGE(.BOTH.,#310520); +#310520 = SURFACE_SIDE_STYLE('',(#310521)); +#310521 = SURFACE_STYLE_FILL_AREA(#310522); +#310522 = FILL_AREA_STYLE('',(#310523)); +#310523 = FILL_AREA_STYLE_COLOUR('',#282540); +#310524 = CURVE_STYLE('',#310525,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310526 = STYLED_ITEM('color',(#310527),#42401); +#310527 = PRESENTATION_STYLE_ASSIGNMENT((#310528,#310533)); +#310528 = SURFACE_STYLE_USAGE(.BOTH.,#310529); +#310529 = SURFACE_SIDE_STYLE('',(#310530)); +#310530 = SURFACE_STYLE_FILL_AREA(#310531); +#310531 = FILL_AREA_STYLE('',(#310532)); +#310532 = FILL_AREA_STYLE_COLOUR('',#282540); +#310533 = CURVE_STYLE('',#310534,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310535 = STYLED_ITEM('color',(#310536),#42413); +#310536 = PRESENTATION_STYLE_ASSIGNMENT((#310537,#310542)); +#310537 = SURFACE_STYLE_USAGE(.BOTH.,#310538); +#310538 = SURFACE_SIDE_STYLE('',(#310539)); +#310539 = SURFACE_STYLE_FILL_AREA(#310540); +#310540 = FILL_AREA_STYLE('',(#310541)); +#310541 = FILL_AREA_STYLE_COLOUR('',#282540); +#310542 = CURVE_STYLE('',#310543,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310544 = STYLED_ITEM('color',(#310545),#42430); +#310545 = PRESENTATION_STYLE_ASSIGNMENT((#310546,#310551)); +#310546 = SURFACE_STYLE_USAGE(.BOTH.,#310547); +#310547 = SURFACE_SIDE_STYLE('',(#310548)); +#310548 = SURFACE_STYLE_FILL_AREA(#310549); +#310549 = FILL_AREA_STYLE('',(#310550)); +#310550 = FILL_AREA_STYLE_COLOUR('',#282540); +#310551 = CURVE_STYLE('',#310552,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310553 = STYLED_ITEM('color',(#310554),#42447); +#310554 = PRESENTATION_STYLE_ASSIGNMENT((#310555,#310560)); +#310555 = SURFACE_STYLE_USAGE(.BOTH.,#310556); +#310556 = SURFACE_SIDE_STYLE('',(#310557)); +#310557 = SURFACE_STYLE_FILL_AREA(#310558); +#310558 = FILL_AREA_STYLE('',(#310559)); +#310559 = FILL_AREA_STYLE_COLOUR('',#282540); +#310560 = CURVE_STYLE('',#310561,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310562 = STYLED_ITEM('color',(#310563),#42464); +#310563 = PRESENTATION_STYLE_ASSIGNMENT((#310564,#310569)); +#310564 = SURFACE_STYLE_USAGE(.BOTH.,#310565); +#310565 = SURFACE_SIDE_STYLE('',(#310566)); +#310566 = SURFACE_STYLE_FILL_AREA(#310567); +#310567 = FILL_AREA_STYLE('',(#310568)); +#310568 = FILL_AREA_STYLE_COLOUR('',#282540); +#310569 = CURVE_STYLE('',#310570,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310571 = STYLED_ITEM('color',(#310572),#42481); +#310572 = PRESENTATION_STYLE_ASSIGNMENT((#310573,#310578)); +#310573 = SURFACE_STYLE_USAGE(.BOTH.,#310574); +#310574 = SURFACE_SIDE_STYLE('',(#310575)); +#310575 = SURFACE_STYLE_FILL_AREA(#310576); +#310576 = FILL_AREA_STYLE('',(#310577)); +#310577 = FILL_AREA_STYLE_COLOUR('',#282540); +#310578 = CURVE_STYLE('',#310579,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310580 = STYLED_ITEM('color',(#310581),#42498); +#310581 = PRESENTATION_STYLE_ASSIGNMENT((#310582,#310587)); +#310582 = SURFACE_STYLE_USAGE(.BOTH.,#310583); +#310583 = SURFACE_SIDE_STYLE('',(#310584)); +#310584 = SURFACE_STYLE_FILL_AREA(#310585); +#310585 = FILL_AREA_STYLE('',(#310586)); +#310586 = FILL_AREA_STYLE_COLOUR('',#282540); +#310587 = CURVE_STYLE('',#310588,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310589 = STYLED_ITEM('color',(#310590),#42515); +#310590 = PRESENTATION_STYLE_ASSIGNMENT((#310591,#310596)); +#310591 = SURFACE_STYLE_USAGE(.BOTH.,#310592); +#310592 = SURFACE_SIDE_STYLE('',(#310593)); +#310593 = SURFACE_STYLE_FILL_AREA(#310594); +#310594 = FILL_AREA_STYLE('',(#310595)); +#310595 = FILL_AREA_STYLE_COLOUR('',#282540); +#310596 = CURVE_STYLE('',#310597,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310598 = STYLED_ITEM('color',(#310599),#42532); +#310599 = PRESENTATION_STYLE_ASSIGNMENT((#310600,#310605)); +#310600 = SURFACE_STYLE_USAGE(.BOTH.,#310601); +#310601 = SURFACE_SIDE_STYLE('',(#310602)); +#310602 = SURFACE_STYLE_FILL_AREA(#310603); +#310603 = FILL_AREA_STYLE('',(#310604)); +#310604 = FILL_AREA_STYLE_COLOUR('',#282540); +#310605 = CURVE_STYLE('',#310606,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310607 = STYLED_ITEM('color',(#310608),#42544); +#310608 = PRESENTATION_STYLE_ASSIGNMENT((#310609,#310614)); +#310609 = SURFACE_STYLE_USAGE(.BOTH.,#310610); +#310610 = SURFACE_SIDE_STYLE('',(#310611)); +#310611 = SURFACE_STYLE_FILL_AREA(#310612); +#310612 = FILL_AREA_STYLE('',(#310613)); +#310613 = FILL_AREA_STYLE_COLOUR('',#282540); +#310614 = CURVE_STYLE('',#310615,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310616 = STYLED_ITEM('color',(#310617),#42561); +#310617 = PRESENTATION_STYLE_ASSIGNMENT((#310618,#310623)); +#310618 = SURFACE_STYLE_USAGE(.BOTH.,#310619); +#310619 = SURFACE_SIDE_STYLE('',(#310620)); +#310620 = SURFACE_STYLE_FILL_AREA(#310621); +#310621 = FILL_AREA_STYLE('',(#310622)); +#310622 = FILL_AREA_STYLE_COLOUR('',#282540); +#310623 = CURVE_STYLE('',#310624,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310625 = STYLED_ITEM('color',(#310626),#42578); +#310626 = PRESENTATION_STYLE_ASSIGNMENT((#310627,#310632)); +#310627 = SURFACE_STYLE_USAGE(.BOTH.,#310628); +#310628 = SURFACE_SIDE_STYLE('',(#310629)); +#310629 = SURFACE_STYLE_FILL_AREA(#310630); +#310630 = FILL_AREA_STYLE('',(#310631)); +#310631 = FILL_AREA_STYLE_COLOUR('',#282540); +#310632 = CURVE_STYLE('',#310633,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310634 = STYLED_ITEM('color',(#310635),#42595); +#310635 = PRESENTATION_STYLE_ASSIGNMENT((#310636,#310641)); +#310636 = SURFACE_STYLE_USAGE(.BOTH.,#310637); +#310637 = SURFACE_SIDE_STYLE('',(#310638)); +#310638 = SURFACE_STYLE_FILL_AREA(#310639); +#310639 = FILL_AREA_STYLE('',(#310640)); +#310640 = FILL_AREA_STYLE_COLOUR('',#282540); +#310641 = CURVE_STYLE('',#310642,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310643 = STYLED_ITEM('color',(#310644),#42612); +#310644 = PRESENTATION_STYLE_ASSIGNMENT((#310645,#310650)); +#310645 = SURFACE_STYLE_USAGE(.BOTH.,#310646); +#310646 = SURFACE_SIDE_STYLE('',(#310647)); +#310647 = SURFACE_STYLE_FILL_AREA(#310648); +#310648 = FILL_AREA_STYLE('',(#310649)); +#310649 = FILL_AREA_STYLE_COLOUR('',#282540); +#310650 = CURVE_STYLE('',#310651,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310652 = STYLED_ITEM('color',(#310653),#42629); +#310653 = PRESENTATION_STYLE_ASSIGNMENT((#310654,#310659)); +#310654 = SURFACE_STYLE_USAGE(.BOTH.,#310655); +#310655 = SURFACE_SIDE_STYLE('',(#310656)); +#310656 = SURFACE_STYLE_FILL_AREA(#310657); +#310657 = FILL_AREA_STYLE('',(#310658)); +#310658 = FILL_AREA_STYLE_COLOUR('',#282540); +#310659 = CURVE_STYLE('',#310660,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310661 = STYLED_ITEM('color',(#310662),#42646); +#310662 = PRESENTATION_STYLE_ASSIGNMENT((#310663,#310668)); +#310663 = SURFACE_STYLE_USAGE(.BOTH.,#310664); +#310664 = SURFACE_SIDE_STYLE('',(#310665)); +#310665 = SURFACE_STYLE_FILL_AREA(#310666); +#310666 = FILL_AREA_STYLE('',(#310667)); +#310667 = FILL_AREA_STYLE_COLOUR('',#282540); +#310668 = CURVE_STYLE('',#310669,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310670 = STYLED_ITEM('color',(#310671),#42663); +#310671 = PRESENTATION_STYLE_ASSIGNMENT((#310672,#310677)); +#310672 = SURFACE_STYLE_USAGE(.BOTH.,#310673); +#310673 = SURFACE_SIDE_STYLE('',(#310674)); +#310674 = SURFACE_STYLE_FILL_AREA(#310675); +#310675 = FILL_AREA_STYLE('',(#310676)); +#310676 = FILL_AREA_STYLE_COLOUR('',#282540); +#310677 = CURVE_STYLE('',#310678,POSITIVE_LENGTH_MEASURE(0.1),#282540); +#310678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310679 = STYLED_ITEM('color',(#310680),#42675); +#310680 = PRESENTATION_STYLE_ASSIGNMENT((#310681,#310686)); +#310681 = SURFACE_STYLE_USAGE(.BOTH.,#310682); +#310682 = SURFACE_SIDE_STYLE('',(#310683)); +#310683 = SURFACE_STYLE_FILL_AREA(#310684); +#310684 = FILL_AREA_STYLE('',(#310685)); +#310685 = FILL_AREA_STYLE_COLOUR('',#282905); +#310686 = CURVE_STYLE('',#310687,POSITIVE_LENGTH_MEASURE(0.1),#282905); +#310687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310688 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #310689,#310698,#310707,#310716,#310725,#310734,#310743,#310752, + #310761,#310770,#310779,#310788,#310797,#310806,#310815,#310824, + #310833,#310842,#310851,#310860,#310869,#310878,#310887,#310896, + #310905,#310914,#310923,#310932,#310941,#310950,#310959,#310968, + #310977,#310986,#310995,#311004,#311013,#311022,#311031,#311040, + #311049,#311058,#311067,#311076,#311085,#311094,#311103,#311112, + #311121,#311130,#311139,#311148,#311157,#311166,#311175,#311184, + #311193,#311202,#311211,#311220,#311229,#311238,#311247,#311256, + #311265,#311274,#311283,#311292,#311301,#311310,#311319,#311328, + #311337,#311346,#311355,#311364,#311373,#311382,#311391,#311400, + #311409,#311418,#311427,#311436,#311445,#311454,#311463,#311472, + #311481,#311490,#311499,#311508,#311517,#311526,#311535,#311544, + #311553,#311562,#311571,#311580,#311589,#311598,#311607,#311616, + #311625,#311634,#311643,#311652,#311661,#311670,#311679,#311688, + #311697,#311706,#311715,#311724,#311733,#311742,#311751,#311760, + #311769,#311778,#311787,#311796,#311805,#311814,#311823,#311832, + #311841,#311850,#311859,#311868,#311877,#311886,#311895,#311904, + #311913,#311922,#311931,#311940,#311949,#311958,#311967,#311976, + #311985,#311994,#312003,#312012,#312021,#312030,#312039,#312048, + #312057,#312066,#312075,#312084,#312093,#312102,#312111,#312120, + #312129,#312138,#312147,#312156,#312165,#312174,#312183,#312192, + #312201,#312210,#312219,#312228,#312237,#312246,#312255,#312264, + #312273,#312282,#312291,#312300,#312309,#312318,#312327,#312336, + #312345,#312354,#312363,#312372,#312381,#312390,#312399,#312408, + #312417,#312426,#312435,#312444,#312453,#312462,#312471,#312480, + #312489,#312498,#312507,#312516,#312525,#312534,#312543,#312552, + #312561,#312570,#312579,#312588,#312597,#312606,#312615,#312624, + #312633,#312642,#312651,#312660,#312669,#312678,#312687,#312696, + #312705,#312714,#312723,#312732,#312741,#312750,#312759,#312768, + #312777,#312786,#312795,#312804,#312813,#312822,#312831,#312840, + #312849,#312858,#312867,#312876,#312885,#312894,#312903,#312912, + #312921,#312930,#312939,#312948,#312957,#312966,#312975,#312984, + #312993,#313002,#313011,#313020,#313029,#313038,#313047,#313056, + #313065,#313074,#313083,#313092,#313101,#313110,#313119,#313128, + #313137,#313146,#313155,#313164,#313173,#313182,#313191,#313200, + #313209,#313218),#109967); +#310689 = STYLED_ITEM('color',(#310690),#103479); +#310690 = PRESENTATION_STYLE_ASSIGNMENT((#310691,#310696)); +#310691 = SURFACE_STYLE_USAGE(.BOTH.,#310692); +#310692 = SURFACE_SIDE_STYLE('',(#310693)); +#310693 = SURFACE_STYLE_FILL_AREA(#310694); +#310694 = FILL_AREA_STYLE('',(#310695)); +#310695 = FILL_AREA_STYLE_COLOUR('',#279624); +#310696 = CURVE_STYLE('',#310697,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310698 = STYLED_ITEM('color',(#310699),#103519); +#310699 = PRESENTATION_STYLE_ASSIGNMENT((#310700,#310705)); +#310700 = SURFACE_STYLE_USAGE(.BOTH.,#310701); +#310701 = SURFACE_SIDE_STYLE('',(#310702)); +#310702 = SURFACE_STYLE_FILL_AREA(#310703); +#310703 = FILL_AREA_STYLE('',(#310704)); +#310704 = FILL_AREA_STYLE_COLOUR('',#279624); +#310705 = CURVE_STYLE('',#310706,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310707 = STYLED_ITEM('color',(#310708),#103582); +#310708 = PRESENTATION_STYLE_ASSIGNMENT((#310709,#310714)); +#310709 = SURFACE_STYLE_USAGE(.BOTH.,#310710); +#310710 = SURFACE_SIDE_STYLE('',(#310711)); +#310711 = SURFACE_STYLE_FILL_AREA(#310712); +#310712 = FILL_AREA_STYLE('',(#310713)); +#310713 = FILL_AREA_STYLE_COLOUR('',#279624); +#310714 = CURVE_STYLE('',#310715,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310716 = STYLED_ITEM('color',(#310717),#103645); +#310717 = PRESENTATION_STYLE_ASSIGNMENT((#310718,#310723)); +#310718 = SURFACE_STYLE_USAGE(.BOTH.,#310719); +#310719 = SURFACE_SIDE_STYLE('',(#310720)); +#310720 = SURFACE_STYLE_FILL_AREA(#310721); +#310721 = FILL_AREA_STYLE('',(#310722)); +#310722 = FILL_AREA_STYLE_COLOUR('',#279624); +#310723 = CURVE_STYLE('',#310724,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310725 = STYLED_ITEM('color',(#310726),#103662); +#310726 = PRESENTATION_STYLE_ASSIGNMENT((#310727,#310732)); +#310727 = SURFACE_STYLE_USAGE(.BOTH.,#310728); +#310728 = SURFACE_SIDE_STYLE('',(#310729)); +#310729 = SURFACE_STYLE_FILL_AREA(#310730); +#310730 = FILL_AREA_STYLE('',(#310731)); +#310731 = FILL_AREA_STYLE_COLOUR('',#279624); +#310732 = CURVE_STYLE('',#310733,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310734 = STYLED_ITEM('color',(#310735),#103951); +#310735 = PRESENTATION_STYLE_ASSIGNMENT((#310736,#310741)); +#310736 = SURFACE_STYLE_USAGE(.BOTH.,#310737); +#310737 = SURFACE_SIDE_STYLE('',(#310738)); +#310738 = SURFACE_STYLE_FILL_AREA(#310739); +#310739 = FILL_AREA_STYLE('',(#310740)); +#310740 = FILL_AREA_STYLE_COLOUR('',#279624); +#310741 = CURVE_STYLE('',#310742,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310743 = STYLED_ITEM('color',(#310744),#103973); +#310744 = PRESENTATION_STYLE_ASSIGNMENT((#310745,#310750)); +#310745 = SURFACE_STYLE_USAGE(.BOTH.,#310746); +#310746 = SURFACE_SIDE_STYLE('',(#310747)); +#310747 = SURFACE_STYLE_FILL_AREA(#310748); +#310748 = FILL_AREA_STYLE('',(#310749)); +#310749 = FILL_AREA_STYLE_COLOUR('',#279624); +#310750 = CURVE_STYLE('',#310751,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310752 = STYLED_ITEM('color',(#310753),#103990); +#310753 = PRESENTATION_STYLE_ASSIGNMENT((#310754,#310759)); +#310754 = SURFACE_STYLE_USAGE(.BOTH.,#310755); +#310755 = SURFACE_SIDE_STYLE('',(#310756)); +#310756 = SURFACE_STYLE_FILL_AREA(#310757); +#310757 = FILL_AREA_STYLE('',(#310758)); +#310758 = FILL_AREA_STYLE_COLOUR('',#279624); +#310759 = CURVE_STYLE('',#310760,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310761 = OVER_RIDING_STYLED_ITEM('overriding color',(#310762),#104023, + #310752); +#310762 = PRESENTATION_STYLE_ASSIGNMENT((#310763,#310768)); +#310763 = SURFACE_STYLE_USAGE(.BOTH.,#310764); +#310764 = SURFACE_SIDE_STYLE('',(#310765)); +#310765 = SURFACE_STYLE_FILL_AREA(#310766); +#310766 = FILL_AREA_STYLE('',(#310767)); +#310767 = FILL_AREA_STYLE_COLOUR('',#280691); +#310768 = CURVE_STYLE('',#310769,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310770 = OVER_RIDING_STYLED_ITEM('overriding color',(#310771),#104055, + #310752); +#310771 = PRESENTATION_STYLE_ASSIGNMENT((#310772,#310777)); +#310772 = SURFACE_STYLE_USAGE(.BOTH.,#310773); +#310773 = SURFACE_SIDE_STYLE('',(#310774)); +#310774 = SURFACE_STYLE_FILL_AREA(#310775); +#310775 = FILL_AREA_STYLE('',(#310776)); +#310776 = FILL_AREA_STYLE_COLOUR('',#280691); +#310777 = CURVE_STYLE('',#310778,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310779 = OVER_RIDING_STYLED_ITEM('overriding color',(#310780),#104089, + #310752); +#310780 = PRESENTATION_STYLE_ASSIGNMENT((#310781,#310786)); +#310781 = SURFACE_STYLE_USAGE(.BOTH.,#310782); +#310782 = SURFACE_SIDE_STYLE('',(#310783)); +#310783 = SURFACE_STYLE_FILL_AREA(#310784); +#310784 = FILL_AREA_STYLE('',(#310785)); +#310785 = FILL_AREA_STYLE_COLOUR('',#280691); +#310786 = CURVE_STYLE('',#310787,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310788 = OVER_RIDING_STYLED_ITEM('overriding color',(#310789),#104121, + #310752); +#310789 = PRESENTATION_STYLE_ASSIGNMENT((#310790,#310795)); +#310790 = SURFACE_STYLE_USAGE(.BOTH.,#310791); +#310791 = SURFACE_SIDE_STYLE('',(#310792)); +#310792 = SURFACE_STYLE_FILL_AREA(#310793); +#310793 = FILL_AREA_STYLE('',(#310794)); +#310794 = FILL_AREA_STYLE_COLOUR('',#280691); +#310795 = CURVE_STYLE('',#310796,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310797 = OVER_RIDING_STYLED_ITEM('overriding color',(#310798),#104155, + #310752); +#310798 = PRESENTATION_STYLE_ASSIGNMENT((#310799,#310804)); +#310799 = SURFACE_STYLE_USAGE(.BOTH.,#310800); +#310800 = SURFACE_SIDE_STYLE('',(#310801)); +#310801 = SURFACE_STYLE_FILL_AREA(#310802); +#310802 = FILL_AREA_STYLE('',(#310803)); +#310803 = FILL_AREA_STYLE_COLOUR('',#280691); +#310804 = CURVE_STYLE('',#310805,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310806 = OVER_RIDING_STYLED_ITEM('overriding color',(#310807),#104187, + #310752); +#310807 = PRESENTATION_STYLE_ASSIGNMENT((#310808,#310813)); +#310808 = SURFACE_STYLE_USAGE(.BOTH.,#310809); +#310809 = SURFACE_SIDE_STYLE('',(#310810)); +#310810 = SURFACE_STYLE_FILL_AREA(#310811); +#310811 = FILL_AREA_STYLE('',(#310812)); +#310812 = FILL_AREA_STYLE_COLOUR('',#280691); +#310813 = CURVE_STYLE('',#310814,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310815 = OVER_RIDING_STYLED_ITEM('overriding color',(#310816),#104221, + #310752); +#310816 = PRESENTATION_STYLE_ASSIGNMENT((#310817,#310822)); +#310817 = SURFACE_STYLE_USAGE(.BOTH.,#310818); +#310818 = SURFACE_SIDE_STYLE('',(#310819)); +#310819 = SURFACE_STYLE_FILL_AREA(#310820); +#310820 = FILL_AREA_STYLE('',(#310821)); +#310821 = FILL_AREA_STYLE_COLOUR('',#280691); +#310822 = CURVE_STYLE('',#310823,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310824 = OVER_RIDING_STYLED_ITEM('overriding color',(#310825),#104253, + #310752); +#310825 = PRESENTATION_STYLE_ASSIGNMENT((#310826,#310831)); +#310826 = SURFACE_STYLE_USAGE(.BOTH.,#310827); +#310827 = SURFACE_SIDE_STYLE('',(#310828)); +#310828 = SURFACE_STYLE_FILL_AREA(#310829); +#310829 = FILL_AREA_STYLE('',(#310830)); +#310830 = FILL_AREA_STYLE_COLOUR('',#280691); +#310831 = CURVE_STYLE('',#310832,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310833 = OVER_RIDING_STYLED_ITEM('overriding color',(#310834),#104287, + #310752); +#310834 = PRESENTATION_STYLE_ASSIGNMENT((#310835,#310840)); +#310835 = SURFACE_STYLE_USAGE(.BOTH.,#310836); +#310836 = SURFACE_SIDE_STYLE('',(#310837)); +#310837 = SURFACE_STYLE_FILL_AREA(#310838); +#310838 = FILL_AREA_STYLE('',(#310839)); +#310839 = FILL_AREA_STYLE_COLOUR('',#280691); +#310840 = CURVE_STYLE('',#310841,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310842 = OVER_RIDING_STYLED_ITEM('overriding color',(#310843),#104319, + #310752); +#310843 = PRESENTATION_STYLE_ASSIGNMENT((#310844,#310849)); +#310844 = SURFACE_STYLE_USAGE(.BOTH.,#310845); +#310845 = SURFACE_SIDE_STYLE('',(#310846)); +#310846 = SURFACE_STYLE_FILL_AREA(#310847); +#310847 = FILL_AREA_STYLE('',(#310848)); +#310848 = FILL_AREA_STYLE_COLOUR('',#280691); +#310849 = CURVE_STYLE('',#310850,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310851 = OVER_RIDING_STYLED_ITEM('overriding color',(#310852),#104353, + #310752); +#310852 = PRESENTATION_STYLE_ASSIGNMENT((#310853,#310858)); +#310853 = SURFACE_STYLE_USAGE(.BOTH.,#310854); +#310854 = SURFACE_SIDE_STYLE('',(#310855)); +#310855 = SURFACE_STYLE_FILL_AREA(#310856); +#310856 = FILL_AREA_STYLE('',(#310857)); +#310857 = FILL_AREA_STYLE_COLOUR('',#280691); +#310858 = CURVE_STYLE('',#310859,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310860 = OVER_RIDING_STYLED_ITEM('overriding color',(#310861),#104385, + #310752); +#310861 = PRESENTATION_STYLE_ASSIGNMENT((#310862,#310867)); +#310862 = SURFACE_STYLE_USAGE(.BOTH.,#310863); +#310863 = SURFACE_SIDE_STYLE('',(#310864)); +#310864 = SURFACE_STYLE_FILL_AREA(#310865); +#310865 = FILL_AREA_STYLE('',(#310866)); +#310866 = FILL_AREA_STYLE_COLOUR('',#280691); +#310867 = CURVE_STYLE('',#310868,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310869 = OVER_RIDING_STYLED_ITEM('overriding color',(#310870),#104419, + #310752); +#310870 = PRESENTATION_STYLE_ASSIGNMENT((#310871,#310876)); +#310871 = SURFACE_STYLE_USAGE(.BOTH.,#310872); +#310872 = SURFACE_SIDE_STYLE('',(#310873)); +#310873 = SURFACE_STYLE_FILL_AREA(#310874); +#310874 = FILL_AREA_STYLE('',(#310875)); +#310875 = FILL_AREA_STYLE_COLOUR('',#280691); +#310876 = CURVE_STYLE('',#310877,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310878 = OVER_RIDING_STYLED_ITEM('overriding color',(#310879),#104451, + #310752); +#310879 = PRESENTATION_STYLE_ASSIGNMENT((#310880,#310885)); +#310880 = SURFACE_STYLE_USAGE(.BOTH.,#310881); +#310881 = SURFACE_SIDE_STYLE('',(#310882)); +#310882 = SURFACE_STYLE_FILL_AREA(#310883); +#310883 = FILL_AREA_STYLE('',(#310884)); +#310884 = FILL_AREA_STYLE_COLOUR('',#280691); +#310885 = CURVE_STYLE('',#310886,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310887 = OVER_RIDING_STYLED_ITEM('overriding color',(#310888),#104485, + #310752); +#310888 = PRESENTATION_STYLE_ASSIGNMENT((#310889,#310894)); +#310889 = SURFACE_STYLE_USAGE(.BOTH.,#310890); +#310890 = SURFACE_SIDE_STYLE('',(#310891)); +#310891 = SURFACE_STYLE_FILL_AREA(#310892); +#310892 = FILL_AREA_STYLE('',(#310893)); +#310893 = FILL_AREA_STYLE_COLOUR('',#280691); +#310894 = CURVE_STYLE('',#310895,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310896 = OVER_RIDING_STYLED_ITEM('overriding color',(#310897),#104517, + #310752); +#310897 = PRESENTATION_STYLE_ASSIGNMENT((#310898,#310903)); +#310898 = SURFACE_STYLE_USAGE(.BOTH.,#310899); +#310899 = SURFACE_SIDE_STYLE('',(#310900)); +#310900 = SURFACE_STYLE_FILL_AREA(#310901); +#310901 = FILL_AREA_STYLE('',(#310902)); +#310902 = FILL_AREA_STYLE_COLOUR('',#280691); +#310903 = CURVE_STYLE('',#310904,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#310904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310905 = STYLED_ITEM('color',(#310906),#104535); +#310906 = PRESENTATION_STYLE_ASSIGNMENT((#310907,#310912)); +#310907 = SURFACE_STYLE_USAGE(.BOTH.,#310908); +#310908 = SURFACE_SIDE_STYLE('',(#310909)); +#310909 = SURFACE_STYLE_FILL_AREA(#310910); +#310910 = FILL_AREA_STYLE('',(#310911)); +#310911 = FILL_AREA_STYLE_COLOUR('',#279624); +#310912 = CURVE_STYLE('',#310913,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310914 = STYLED_ITEM('color',(#310915),#104547); +#310915 = PRESENTATION_STYLE_ASSIGNMENT((#310916,#310921)); +#310916 = SURFACE_STYLE_USAGE(.BOTH.,#310917); +#310917 = SURFACE_SIDE_STYLE('',(#310918)); +#310918 = SURFACE_STYLE_FILL_AREA(#310919); +#310919 = FILL_AREA_STYLE('',(#310920)); +#310920 = FILL_AREA_STYLE_COLOUR('',#279624); +#310921 = CURVE_STYLE('',#310922,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310923 = STYLED_ITEM('color',(#310924),#104559); +#310924 = PRESENTATION_STYLE_ASSIGNMENT((#310925,#310930)); +#310925 = SURFACE_STYLE_USAGE(.BOTH.,#310926); +#310926 = SURFACE_SIDE_STYLE('',(#310927)); +#310927 = SURFACE_STYLE_FILL_AREA(#310928); +#310928 = FILL_AREA_STYLE('',(#310929)); +#310929 = FILL_AREA_STYLE_COLOUR('',#279624); +#310930 = CURVE_STYLE('',#310931,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310932 = STYLED_ITEM('color',(#310933),#104590); +#310933 = PRESENTATION_STYLE_ASSIGNMENT((#310934,#310939)); +#310934 = SURFACE_STYLE_USAGE(.BOTH.,#310935); +#310935 = SURFACE_SIDE_STYLE('',(#310936)); +#310936 = SURFACE_STYLE_FILL_AREA(#310937); +#310937 = FILL_AREA_STYLE('',(#310938)); +#310938 = FILL_AREA_STYLE_COLOUR('',#279624); +#310939 = CURVE_STYLE('',#310940,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310941 = STYLED_ITEM('color',(#310942),#104614); +#310942 = PRESENTATION_STYLE_ASSIGNMENT((#310943,#310948)); +#310943 = SURFACE_STYLE_USAGE(.BOTH.,#310944); +#310944 = SURFACE_SIDE_STYLE('',(#310945)); +#310945 = SURFACE_STYLE_FILL_AREA(#310946); +#310946 = FILL_AREA_STYLE('',(#310947)); +#310947 = FILL_AREA_STYLE_COLOUR('',#279624); +#310948 = CURVE_STYLE('',#310949,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310950 = STYLED_ITEM('color',(#310951),#104638); +#310951 = PRESENTATION_STYLE_ASSIGNMENT((#310952,#310957)); +#310952 = SURFACE_STYLE_USAGE(.BOTH.,#310953); +#310953 = SURFACE_SIDE_STYLE('',(#310954)); +#310954 = SURFACE_STYLE_FILL_AREA(#310955); +#310955 = FILL_AREA_STYLE('',(#310956)); +#310956 = FILL_AREA_STYLE_COLOUR('',#279624); +#310957 = CURVE_STYLE('',#310958,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310959 = STYLED_ITEM('color',(#310960),#104655); +#310960 = PRESENTATION_STYLE_ASSIGNMENT((#310961,#310966)); +#310961 = SURFACE_STYLE_USAGE(.BOTH.,#310962); +#310962 = SURFACE_SIDE_STYLE('',(#310963)); +#310963 = SURFACE_STYLE_FILL_AREA(#310964); +#310964 = FILL_AREA_STYLE('',(#310965)); +#310965 = FILL_AREA_STYLE_COLOUR('',#279624); +#310966 = CURVE_STYLE('',#310967,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310968 = STYLED_ITEM('color',(#310969),#104686); +#310969 = PRESENTATION_STYLE_ASSIGNMENT((#310970,#310975)); +#310970 = SURFACE_STYLE_USAGE(.BOTH.,#310971); +#310971 = SURFACE_SIDE_STYLE('',(#310972)); +#310972 = SURFACE_STYLE_FILL_AREA(#310973); +#310973 = FILL_AREA_STYLE('',(#310974)); +#310974 = FILL_AREA_STYLE_COLOUR('',#279624); +#310975 = CURVE_STYLE('',#310976,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310977 = STYLED_ITEM('color',(#310978),#104710); +#310978 = PRESENTATION_STYLE_ASSIGNMENT((#310979,#310984)); +#310979 = SURFACE_STYLE_USAGE(.BOTH.,#310980); +#310980 = SURFACE_SIDE_STYLE('',(#310981)); +#310981 = SURFACE_STYLE_FILL_AREA(#310982); +#310982 = FILL_AREA_STYLE('',(#310983)); +#310983 = FILL_AREA_STYLE_COLOUR('',#279624); +#310984 = CURVE_STYLE('',#310985,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310986 = STYLED_ITEM('color',(#310987),#104734); +#310987 = PRESENTATION_STYLE_ASSIGNMENT((#310988,#310993)); +#310988 = SURFACE_STYLE_USAGE(.BOTH.,#310989); +#310989 = SURFACE_SIDE_STYLE('',(#310990)); +#310990 = SURFACE_STYLE_FILL_AREA(#310991); +#310991 = FILL_AREA_STYLE('',(#310992)); +#310992 = FILL_AREA_STYLE_COLOUR('',#279624); +#310993 = CURVE_STYLE('',#310994,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#310994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310995 = STYLED_ITEM('color',(#310996),#104751); +#310996 = PRESENTATION_STYLE_ASSIGNMENT((#310997,#311002)); +#310997 = SURFACE_STYLE_USAGE(.BOTH.,#310998); +#310998 = SURFACE_SIDE_STYLE('',(#310999)); +#310999 = SURFACE_STYLE_FILL_AREA(#311000); +#311000 = FILL_AREA_STYLE('',(#311001)); +#311001 = FILL_AREA_STYLE_COLOUR('',#279624); +#311002 = CURVE_STYLE('',#311003,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311004 = STYLED_ITEM('color',(#311005),#104782); +#311005 = PRESENTATION_STYLE_ASSIGNMENT((#311006,#311011)); +#311006 = SURFACE_STYLE_USAGE(.BOTH.,#311007); +#311007 = SURFACE_SIDE_STYLE('',(#311008)); +#311008 = SURFACE_STYLE_FILL_AREA(#311009); +#311009 = FILL_AREA_STYLE('',(#311010)); +#311010 = FILL_AREA_STYLE_COLOUR('',#279624); +#311011 = CURVE_STYLE('',#311012,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311013 = STYLED_ITEM('color',(#311014),#104806); +#311014 = PRESENTATION_STYLE_ASSIGNMENT((#311015,#311020)); +#311015 = SURFACE_STYLE_USAGE(.BOTH.,#311016); +#311016 = SURFACE_SIDE_STYLE('',(#311017)); +#311017 = SURFACE_STYLE_FILL_AREA(#311018); +#311018 = FILL_AREA_STYLE('',(#311019)); +#311019 = FILL_AREA_STYLE_COLOUR('',#279624); +#311020 = CURVE_STYLE('',#311021,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311022 = STYLED_ITEM('color',(#311023),#104830); +#311023 = PRESENTATION_STYLE_ASSIGNMENT((#311024,#311029)); +#311024 = SURFACE_STYLE_USAGE(.BOTH.,#311025); +#311025 = SURFACE_SIDE_STYLE('',(#311026)); +#311026 = SURFACE_STYLE_FILL_AREA(#311027); +#311027 = FILL_AREA_STYLE('',(#311028)); +#311028 = FILL_AREA_STYLE_COLOUR('',#279624); +#311029 = CURVE_STYLE('',#311030,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311031 = STYLED_ITEM('color',(#311032),#104847); +#311032 = PRESENTATION_STYLE_ASSIGNMENT((#311033,#311038)); +#311033 = SURFACE_STYLE_USAGE(.BOTH.,#311034); +#311034 = SURFACE_SIDE_STYLE('',(#311035)); +#311035 = SURFACE_STYLE_FILL_AREA(#311036); +#311036 = FILL_AREA_STYLE('',(#311037)); +#311037 = FILL_AREA_STYLE_COLOUR('',#279624); +#311038 = CURVE_STYLE('',#311039,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311040 = STYLED_ITEM('color',(#311041),#104878); +#311041 = PRESENTATION_STYLE_ASSIGNMENT((#311042,#311047)); +#311042 = SURFACE_STYLE_USAGE(.BOTH.,#311043); +#311043 = SURFACE_SIDE_STYLE('',(#311044)); +#311044 = SURFACE_STYLE_FILL_AREA(#311045); +#311045 = FILL_AREA_STYLE('',(#311046)); +#311046 = FILL_AREA_STYLE_COLOUR('',#279624); +#311047 = CURVE_STYLE('',#311048,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311049 = STYLED_ITEM('color',(#311050),#104902); +#311050 = PRESENTATION_STYLE_ASSIGNMENT((#311051,#311056)); +#311051 = SURFACE_STYLE_USAGE(.BOTH.,#311052); +#311052 = SURFACE_SIDE_STYLE('',(#311053)); +#311053 = SURFACE_STYLE_FILL_AREA(#311054); +#311054 = FILL_AREA_STYLE('',(#311055)); +#311055 = FILL_AREA_STYLE_COLOUR('',#279624); +#311056 = CURVE_STYLE('',#311057,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311058 = STYLED_ITEM('color',(#311059),#104926); +#311059 = PRESENTATION_STYLE_ASSIGNMENT((#311060,#311065)); +#311060 = SURFACE_STYLE_USAGE(.BOTH.,#311061); +#311061 = SURFACE_SIDE_STYLE('',(#311062)); +#311062 = SURFACE_STYLE_FILL_AREA(#311063); +#311063 = FILL_AREA_STYLE('',(#311064)); +#311064 = FILL_AREA_STYLE_COLOUR('',#279624); +#311065 = CURVE_STYLE('',#311066,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311067 = STYLED_ITEM('color',(#311068),#104943); +#311068 = PRESENTATION_STYLE_ASSIGNMENT((#311069,#311074)); +#311069 = SURFACE_STYLE_USAGE(.BOTH.,#311070); +#311070 = SURFACE_SIDE_STYLE('',(#311071)); +#311071 = SURFACE_STYLE_FILL_AREA(#311072); +#311072 = FILL_AREA_STYLE('',(#311073)); +#311073 = FILL_AREA_STYLE_COLOUR('',#279624); +#311074 = CURVE_STYLE('',#311075,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311076 = STYLED_ITEM('color',(#311077),#104974); +#311077 = PRESENTATION_STYLE_ASSIGNMENT((#311078,#311083)); +#311078 = SURFACE_STYLE_USAGE(.BOTH.,#311079); +#311079 = SURFACE_SIDE_STYLE('',(#311080)); +#311080 = SURFACE_STYLE_FILL_AREA(#311081); +#311081 = FILL_AREA_STYLE('',(#311082)); +#311082 = FILL_AREA_STYLE_COLOUR('',#279624); +#311083 = CURVE_STYLE('',#311084,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311085 = STYLED_ITEM('color',(#311086),#104998); +#311086 = PRESENTATION_STYLE_ASSIGNMENT((#311087,#311092)); +#311087 = SURFACE_STYLE_USAGE(.BOTH.,#311088); +#311088 = SURFACE_SIDE_STYLE('',(#311089)); +#311089 = SURFACE_STYLE_FILL_AREA(#311090); +#311090 = FILL_AREA_STYLE('',(#311091)); +#311091 = FILL_AREA_STYLE_COLOUR('',#279624); +#311092 = CURVE_STYLE('',#311093,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311094 = STYLED_ITEM('color',(#311095),#105022); +#311095 = PRESENTATION_STYLE_ASSIGNMENT((#311096,#311101)); +#311096 = SURFACE_STYLE_USAGE(.BOTH.,#311097); +#311097 = SURFACE_SIDE_STYLE('',(#311098)); +#311098 = SURFACE_STYLE_FILL_AREA(#311099); +#311099 = FILL_AREA_STYLE('',(#311100)); +#311100 = FILL_AREA_STYLE_COLOUR('',#279624); +#311101 = CURVE_STYLE('',#311102,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311103 = STYLED_ITEM('color',(#311104),#105039); +#311104 = PRESENTATION_STYLE_ASSIGNMENT((#311105,#311110)); +#311105 = SURFACE_STYLE_USAGE(.BOTH.,#311106); +#311106 = SURFACE_SIDE_STYLE('',(#311107)); +#311107 = SURFACE_STYLE_FILL_AREA(#311108); +#311108 = FILL_AREA_STYLE('',(#311109)); +#311109 = FILL_AREA_STYLE_COLOUR('',#279624); +#311110 = CURVE_STYLE('',#311111,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311112 = STYLED_ITEM('color',(#311113),#105070); +#311113 = PRESENTATION_STYLE_ASSIGNMENT((#311114,#311119)); +#311114 = SURFACE_STYLE_USAGE(.BOTH.,#311115); +#311115 = SURFACE_SIDE_STYLE('',(#311116)); +#311116 = SURFACE_STYLE_FILL_AREA(#311117); +#311117 = FILL_AREA_STYLE('',(#311118)); +#311118 = FILL_AREA_STYLE_COLOUR('',#279624); +#311119 = CURVE_STYLE('',#311120,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311121 = STYLED_ITEM('color',(#311122),#105094); +#311122 = PRESENTATION_STYLE_ASSIGNMENT((#311123,#311128)); +#311123 = SURFACE_STYLE_USAGE(.BOTH.,#311124); +#311124 = SURFACE_SIDE_STYLE('',(#311125)); +#311125 = SURFACE_STYLE_FILL_AREA(#311126); +#311126 = FILL_AREA_STYLE('',(#311127)); +#311127 = FILL_AREA_STYLE_COLOUR('',#279624); +#311128 = CURVE_STYLE('',#311129,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311130 = STYLED_ITEM('color',(#311131),#105118); +#311131 = PRESENTATION_STYLE_ASSIGNMENT((#311132,#311137)); +#311132 = SURFACE_STYLE_USAGE(.BOTH.,#311133); +#311133 = SURFACE_SIDE_STYLE('',(#311134)); +#311134 = SURFACE_STYLE_FILL_AREA(#311135); +#311135 = FILL_AREA_STYLE('',(#311136)); +#311136 = FILL_AREA_STYLE_COLOUR('',#279624); +#311137 = CURVE_STYLE('',#311138,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311139 = STYLED_ITEM('color',(#311140),#105135); +#311140 = PRESENTATION_STYLE_ASSIGNMENT((#311141,#311146)); +#311141 = SURFACE_STYLE_USAGE(.BOTH.,#311142); +#311142 = SURFACE_SIDE_STYLE('',(#311143)); +#311143 = SURFACE_STYLE_FILL_AREA(#311144); +#311144 = FILL_AREA_STYLE('',(#311145)); +#311145 = FILL_AREA_STYLE_COLOUR('',#279624); +#311146 = CURVE_STYLE('',#311147,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311148 = STYLED_ITEM('color',(#311149),#105166); +#311149 = PRESENTATION_STYLE_ASSIGNMENT((#311150,#311155)); +#311150 = SURFACE_STYLE_USAGE(.BOTH.,#311151); +#311151 = SURFACE_SIDE_STYLE('',(#311152)); +#311152 = SURFACE_STYLE_FILL_AREA(#311153); +#311153 = FILL_AREA_STYLE('',(#311154)); +#311154 = FILL_AREA_STYLE_COLOUR('',#279624); +#311155 = CURVE_STYLE('',#311156,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311157 = STYLED_ITEM('color',(#311158),#105190); +#311158 = PRESENTATION_STYLE_ASSIGNMENT((#311159,#311164)); +#311159 = SURFACE_STYLE_USAGE(.BOTH.,#311160); +#311160 = SURFACE_SIDE_STYLE('',(#311161)); +#311161 = SURFACE_STYLE_FILL_AREA(#311162); +#311162 = FILL_AREA_STYLE('',(#311163)); +#311163 = FILL_AREA_STYLE_COLOUR('',#279624); +#311164 = CURVE_STYLE('',#311165,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311166 = STYLED_ITEM('color',(#311167),#105214); +#311167 = PRESENTATION_STYLE_ASSIGNMENT((#311168,#311173)); +#311168 = SURFACE_STYLE_USAGE(.BOTH.,#311169); +#311169 = SURFACE_SIDE_STYLE('',(#311170)); +#311170 = SURFACE_STYLE_FILL_AREA(#311171); +#311171 = FILL_AREA_STYLE('',(#311172)); +#311172 = FILL_AREA_STYLE_COLOUR('',#279624); +#311173 = CURVE_STYLE('',#311174,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311175 = STYLED_ITEM('color',(#311176),#105231); +#311176 = PRESENTATION_STYLE_ASSIGNMENT((#311177,#311182)); +#311177 = SURFACE_STYLE_USAGE(.BOTH.,#311178); +#311178 = SURFACE_SIDE_STYLE('',(#311179)); +#311179 = SURFACE_STYLE_FILL_AREA(#311180); +#311180 = FILL_AREA_STYLE('',(#311181)); +#311181 = FILL_AREA_STYLE_COLOUR('',#279624); +#311182 = CURVE_STYLE('',#311183,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311184 = STYLED_ITEM('color',(#311185),#105262); +#311185 = PRESENTATION_STYLE_ASSIGNMENT((#311186,#311191)); +#311186 = SURFACE_STYLE_USAGE(.BOTH.,#311187); +#311187 = SURFACE_SIDE_STYLE('',(#311188)); +#311188 = SURFACE_STYLE_FILL_AREA(#311189); +#311189 = FILL_AREA_STYLE('',(#311190)); +#311190 = FILL_AREA_STYLE_COLOUR('',#279624); +#311191 = CURVE_STYLE('',#311192,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311193 = STYLED_ITEM('color',(#311194),#105286); +#311194 = PRESENTATION_STYLE_ASSIGNMENT((#311195,#311200)); +#311195 = SURFACE_STYLE_USAGE(.BOTH.,#311196); +#311196 = SURFACE_SIDE_STYLE('',(#311197)); +#311197 = SURFACE_STYLE_FILL_AREA(#311198); +#311198 = FILL_AREA_STYLE('',(#311199)); +#311199 = FILL_AREA_STYLE_COLOUR('',#279624); +#311200 = CURVE_STYLE('',#311201,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311202 = STYLED_ITEM('color',(#311203),#105310); +#311203 = PRESENTATION_STYLE_ASSIGNMENT((#311204,#311209)); +#311204 = SURFACE_STYLE_USAGE(.BOTH.,#311205); +#311205 = SURFACE_SIDE_STYLE('',(#311206)); +#311206 = SURFACE_STYLE_FILL_AREA(#311207); +#311207 = FILL_AREA_STYLE('',(#311208)); +#311208 = FILL_AREA_STYLE_COLOUR('',#279624); +#311209 = CURVE_STYLE('',#311210,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311211 = STYLED_ITEM('color',(#311212),#105327); +#311212 = PRESENTATION_STYLE_ASSIGNMENT((#311213,#311218)); +#311213 = SURFACE_STYLE_USAGE(.BOTH.,#311214); +#311214 = SURFACE_SIDE_STYLE('',(#311215)); +#311215 = SURFACE_STYLE_FILL_AREA(#311216); +#311216 = FILL_AREA_STYLE('',(#311217)); +#311217 = FILL_AREA_STYLE_COLOUR('',#280691); +#311218 = CURVE_STYLE('',#311219,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311220 = STYLED_ITEM('color',(#311221),#105344); +#311221 = PRESENTATION_STYLE_ASSIGNMENT((#311222,#311227)); +#311222 = SURFACE_STYLE_USAGE(.BOTH.,#311223); +#311223 = SURFACE_SIDE_STYLE('',(#311224)); +#311224 = SURFACE_STYLE_FILL_AREA(#311225); +#311225 = FILL_AREA_STYLE('',(#311226)); +#311226 = FILL_AREA_STYLE_COLOUR('',#280691); +#311227 = CURVE_STYLE('',#311228,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311229 = STYLED_ITEM('color',(#311230),#105391); +#311230 = PRESENTATION_STYLE_ASSIGNMENT((#311231,#311236)); +#311231 = SURFACE_STYLE_USAGE(.BOTH.,#311232); +#311232 = SURFACE_SIDE_STYLE('',(#311233)); +#311233 = SURFACE_STYLE_FILL_AREA(#311234); +#311234 = FILL_AREA_STYLE('',(#311235)); +#311235 = FILL_AREA_STYLE_COLOUR('',#280691); +#311236 = CURVE_STYLE('',#311237,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311238 = STYLED_ITEM('color',(#311239),#105408); +#311239 = PRESENTATION_STYLE_ASSIGNMENT((#311240,#311245)); +#311240 = SURFACE_STYLE_USAGE(.BOTH.,#311241); +#311241 = SURFACE_SIDE_STYLE('',(#311242)); +#311242 = SURFACE_STYLE_FILL_AREA(#311243); +#311243 = FILL_AREA_STYLE('',(#311244)); +#311244 = FILL_AREA_STYLE_COLOUR('',#280691); +#311245 = CURVE_STYLE('',#311246,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311247 = STYLED_ITEM('color',(#311248),#105455); +#311248 = PRESENTATION_STYLE_ASSIGNMENT((#311249,#311254)); +#311249 = SURFACE_STYLE_USAGE(.BOTH.,#311250); +#311250 = SURFACE_SIDE_STYLE('',(#311251)); +#311251 = SURFACE_STYLE_FILL_AREA(#311252); +#311252 = FILL_AREA_STYLE('',(#311253)); +#311253 = FILL_AREA_STYLE_COLOUR('',#280691); +#311254 = CURVE_STYLE('',#311255,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311256 = STYLED_ITEM('color',(#311257),#105472); +#311257 = PRESENTATION_STYLE_ASSIGNMENT((#311258,#311263)); +#311258 = SURFACE_STYLE_USAGE(.BOTH.,#311259); +#311259 = SURFACE_SIDE_STYLE('',(#311260)); +#311260 = SURFACE_STYLE_FILL_AREA(#311261); +#311261 = FILL_AREA_STYLE('',(#311262)); +#311262 = FILL_AREA_STYLE_COLOUR('',#280691); +#311263 = CURVE_STYLE('',#311264,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311265 = STYLED_ITEM('color',(#311266),#105519); +#311266 = PRESENTATION_STYLE_ASSIGNMENT((#311267,#311272)); +#311267 = SURFACE_STYLE_USAGE(.BOTH.,#311268); +#311268 = SURFACE_SIDE_STYLE('',(#311269)); +#311269 = SURFACE_STYLE_FILL_AREA(#311270); +#311270 = FILL_AREA_STYLE('',(#311271)); +#311271 = FILL_AREA_STYLE_COLOUR('',#280691); +#311272 = CURVE_STYLE('',#311273,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311274 = STYLED_ITEM('color',(#311275),#105536); +#311275 = PRESENTATION_STYLE_ASSIGNMENT((#311276,#311281)); +#311276 = SURFACE_STYLE_USAGE(.BOTH.,#311277); +#311277 = SURFACE_SIDE_STYLE('',(#311278)); +#311278 = SURFACE_STYLE_FILL_AREA(#311279); +#311279 = FILL_AREA_STYLE('',(#311280)); +#311280 = FILL_AREA_STYLE_COLOUR('',#280691); +#311281 = CURVE_STYLE('',#311282,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311283 = STYLED_ITEM('color',(#311284),#105583); +#311284 = PRESENTATION_STYLE_ASSIGNMENT((#311285,#311290)); +#311285 = SURFACE_STYLE_USAGE(.BOTH.,#311286); +#311286 = SURFACE_SIDE_STYLE('',(#311287)); +#311287 = SURFACE_STYLE_FILL_AREA(#311288); +#311288 = FILL_AREA_STYLE('',(#311289)); +#311289 = FILL_AREA_STYLE_COLOUR('',#280691); +#311290 = CURVE_STYLE('',#311291,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311292 = STYLED_ITEM('color',(#311293),#105600); +#311293 = PRESENTATION_STYLE_ASSIGNMENT((#311294,#311299)); +#311294 = SURFACE_STYLE_USAGE(.BOTH.,#311295); +#311295 = SURFACE_SIDE_STYLE('',(#311296)); +#311296 = SURFACE_STYLE_FILL_AREA(#311297); +#311297 = FILL_AREA_STYLE('',(#311298)); +#311298 = FILL_AREA_STYLE_COLOUR('',#280691); +#311299 = CURVE_STYLE('',#311300,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311301 = STYLED_ITEM('color',(#311302),#105647); +#311302 = PRESENTATION_STYLE_ASSIGNMENT((#311303,#311308)); +#311303 = SURFACE_STYLE_USAGE(.BOTH.,#311304); +#311304 = SURFACE_SIDE_STYLE('',(#311305)); +#311305 = SURFACE_STYLE_FILL_AREA(#311306); +#311306 = FILL_AREA_STYLE('',(#311307)); +#311307 = FILL_AREA_STYLE_COLOUR('',#280691); +#311308 = CURVE_STYLE('',#311309,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311310 = STYLED_ITEM('color',(#311311),#105664); +#311311 = PRESENTATION_STYLE_ASSIGNMENT((#311312,#311317)); +#311312 = SURFACE_STYLE_USAGE(.BOTH.,#311313); +#311313 = SURFACE_SIDE_STYLE('',(#311314)); +#311314 = SURFACE_STYLE_FILL_AREA(#311315); +#311315 = FILL_AREA_STYLE('',(#311316)); +#311316 = FILL_AREA_STYLE_COLOUR('',#280691); +#311317 = CURVE_STYLE('',#311318,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311319 = STYLED_ITEM('color',(#311320),#105711); +#311320 = PRESENTATION_STYLE_ASSIGNMENT((#311321,#311326)); +#311321 = SURFACE_STYLE_USAGE(.BOTH.,#311322); +#311322 = SURFACE_SIDE_STYLE('',(#311323)); +#311323 = SURFACE_STYLE_FILL_AREA(#311324); +#311324 = FILL_AREA_STYLE('',(#311325)); +#311325 = FILL_AREA_STYLE_COLOUR('',#280691); +#311326 = CURVE_STYLE('',#311327,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311328 = STYLED_ITEM('color',(#311329),#105728); +#311329 = PRESENTATION_STYLE_ASSIGNMENT((#311330,#311335)); +#311330 = SURFACE_STYLE_USAGE(.BOTH.,#311331); +#311331 = SURFACE_SIDE_STYLE('',(#311332)); +#311332 = SURFACE_STYLE_FILL_AREA(#311333); +#311333 = FILL_AREA_STYLE('',(#311334)); +#311334 = FILL_AREA_STYLE_COLOUR('',#280691); +#311335 = CURVE_STYLE('',#311336,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311337 = STYLED_ITEM('color',(#311338),#105775); +#311338 = PRESENTATION_STYLE_ASSIGNMENT((#311339,#311344)); +#311339 = SURFACE_STYLE_USAGE(.BOTH.,#311340); +#311340 = SURFACE_SIDE_STYLE('',(#311341)); +#311341 = SURFACE_STYLE_FILL_AREA(#311342); +#311342 = FILL_AREA_STYLE('',(#311343)); +#311343 = FILL_AREA_STYLE_COLOUR('',#280691); +#311344 = CURVE_STYLE('',#311345,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311346 = STYLED_ITEM('color',(#311347),#105792); +#311347 = PRESENTATION_STYLE_ASSIGNMENT((#311348,#311353)); +#311348 = SURFACE_STYLE_USAGE(.BOTH.,#311349); +#311349 = SURFACE_SIDE_STYLE('',(#311350)); +#311350 = SURFACE_STYLE_FILL_AREA(#311351); +#311351 = FILL_AREA_STYLE('',(#311352)); +#311352 = FILL_AREA_STYLE_COLOUR('',#280691); +#311353 = CURVE_STYLE('',#311354,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311355 = STYLED_ITEM('color',(#311356),#105839); +#311356 = PRESENTATION_STYLE_ASSIGNMENT((#311357,#311362)); +#311357 = SURFACE_STYLE_USAGE(.BOTH.,#311358); +#311358 = SURFACE_SIDE_STYLE('',(#311359)); +#311359 = SURFACE_STYLE_FILL_AREA(#311360); +#311360 = FILL_AREA_STYLE('',(#311361)); +#311361 = FILL_AREA_STYLE_COLOUR('',#280691); +#311362 = CURVE_STYLE('',#311363,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311364 = STYLED_ITEM('color',(#311365),#105856); +#311365 = PRESENTATION_STYLE_ASSIGNMENT((#311366,#311371)); +#311366 = SURFACE_STYLE_USAGE(.BOTH.,#311367); +#311367 = SURFACE_SIDE_STYLE('',(#311368)); +#311368 = SURFACE_STYLE_FILL_AREA(#311369); +#311369 = FILL_AREA_STYLE('',(#311370)); +#311370 = FILL_AREA_STYLE_COLOUR('',#280691); +#311371 = CURVE_STYLE('',#311372,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311373 = STYLED_ITEM('color',(#311374),#105903); +#311374 = PRESENTATION_STYLE_ASSIGNMENT((#311375,#311380)); +#311375 = SURFACE_STYLE_USAGE(.BOTH.,#311376); +#311376 = SURFACE_SIDE_STYLE('',(#311377)); +#311377 = SURFACE_STYLE_FILL_AREA(#311378); +#311378 = FILL_AREA_STYLE('',(#311379)); +#311379 = FILL_AREA_STYLE_COLOUR('',#280691); +#311380 = CURVE_STYLE('',#311381,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311382 = STYLED_ITEM('color',(#311383),#105920); +#311383 = PRESENTATION_STYLE_ASSIGNMENT((#311384,#311389)); +#311384 = SURFACE_STYLE_USAGE(.BOTH.,#311385); +#311385 = SURFACE_SIDE_STYLE('',(#311386)); +#311386 = SURFACE_STYLE_FILL_AREA(#311387); +#311387 = FILL_AREA_STYLE('',(#311388)); +#311388 = FILL_AREA_STYLE_COLOUR('',#280691); +#311389 = CURVE_STYLE('',#311390,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311391 = STYLED_ITEM('color',(#311392),#105967); +#311392 = PRESENTATION_STYLE_ASSIGNMENT((#311393,#311398)); +#311393 = SURFACE_STYLE_USAGE(.BOTH.,#311394); +#311394 = SURFACE_SIDE_STYLE('',(#311395)); +#311395 = SURFACE_STYLE_FILL_AREA(#311396); +#311396 = FILL_AREA_STYLE('',(#311397)); +#311397 = FILL_AREA_STYLE_COLOUR('',#280691); +#311398 = CURVE_STYLE('',#311399,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311400 = STYLED_ITEM('color',(#311401),#105984); +#311401 = PRESENTATION_STYLE_ASSIGNMENT((#311402,#311407)); +#311402 = SURFACE_STYLE_USAGE(.BOTH.,#311403); +#311403 = SURFACE_SIDE_STYLE('',(#311404)); +#311404 = SURFACE_STYLE_FILL_AREA(#311405); +#311405 = FILL_AREA_STYLE('',(#311406)); +#311406 = FILL_AREA_STYLE_COLOUR('',#280691); +#311407 = CURVE_STYLE('',#311408,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311409 = STYLED_ITEM('color',(#311410),#106031); +#311410 = PRESENTATION_STYLE_ASSIGNMENT((#311411,#311416)); +#311411 = SURFACE_STYLE_USAGE(.BOTH.,#311412); +#311412 = SURFACE_SIDE_STYLE('',(#311413)); +#311413 = SURFACE_STYLE_FILL_AREA(#311414); +#311414 = FILL_AREA_STYLE('',(#311415)); +#311415 = FILL_AREA_STYLE_COLOUR('',#280691); +#311416 = CURVE_STYLE('',#311417,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311418 = STYLED_ITEM('color',(#311419),#106048); +#311419 = PRESENTATION_STYLE_ASSIGNMENT((#311420,#311425)); +#311420 = SURFACE_STYLE_USAGE(.BOTH.,#311421); +#311421 = SURFACE_SIDE_STYLE('',(#311422)); +#311422 = SURFACE_STYLE_FILL_AREA(#311423); +#311423 = FILL_AREA_STYLE('',(#311424)); +#311424 = FILL_AREA_STYLE_COLOUR('',#280691); +#311425 = CURVE_STYLE('',#311426,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311427 = STYLED_ITEM('color',(#311428),#106095); +#311428 = PRESENTATION_STYLE_ASSIGNMENT((#311429,#311434)); +#311429 = SURFACE_STYLE_USAGE(.BOTH.,#311430); +#311430 = SURFACE_SIDE_STYLE('',(#311431)); +#311431 = SURFACE_STYLE_FILL_AREA(#311432); +#311432 = FILL_AREA_STYLE('',(#311433)); +#311433 = FILL_AREA_STYLE_COLOUR('',#280691); +#311434 = CURVE_STYLE('',#311435,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311436 = STYLED_ITEM('color',(#311437),#106112); +#311437 = PRESENTATION_STYLE_ASSIGNMENT((#311438,#311443)); +#311438 = SURFACE_STYLE_USAGE(.BOTH.,#311439); +#311439 = SURFACE_SIDE_STYLE('',(#311440)); +#311440 = SURFACE_STYLE_FILL_AREA(#311441); +#311441 = FILL_AREA_STYLE('',(#311442)); +#311442 = FILL_AREA_STYLE_COLOUR('',#280691); +#311443 = CURVE_STYLE('',#311444,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311445 = STYLED_ITEM('color',(#311446),#106159); +#311446 = PRESENTATION_STYLE_ASSIGNMENT((#311447,#311452)); +#311447 = SURFACE_STYLE_USAGE(.BOTH.,#311448); +#311448 = SURFACE_SIDE_STYLE('',(#311449)); +#311449 = SURFACE_STYLE_FILL_AREA(#311450); +#311450 = FILL_AREA_STYLE('',(#311451)); +#311451 = FILL_AREA_STYLE_COLOUR('',#280691); +#311452 = CURVE_STYLE('',#311453,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311454 = STYLED_ITEM('color',(#311455),#106176); +#311455 = PRESENTATION_STYLE_ASSIGNMENT((#311456,#311461)); +#311456 = SURFACE_STYLE_USAGE(.BOTH.,#311457); +#311457 = SURFACE_SIDE_STYLE('',(#311458)); +#311458 = SURFACE_STYLE_FILL_AREA(#311459); +#311459 = FILL_AREA_STYLE('',(#311460)); +#311460 = FILL_AREA_STYLE_COLOUR('',#280691); +#311461 = CURVE_STYLE('',#311462,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311463 = STYLED_ITEM('color',(#311464),#106223); +#311464 = PRESENTATION_STYLE_ASSIGNMENT((#311465,#311470)); +#311465 = SURFACE_STYLE_USAGE(.BOTH.,#311466); +#311466 = SURFACE_SIDE_STYLE('',(#311467)); +#311467 = SURFACE_STYLE_FILL_AREA(#311468); +#311468 = FILL_AREA_STYLE('',(#311469)); +#311469 = FILL_AREA_STYLE_COLOUR('',#280691); +#311470 = CURVE_STYLE('',#311471,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311472 = STYLED_ITEM('color',(#311473),#106240); +#311473 = PRESENTATION_STYLE_ASSIGNMENT((#311474,#311479)); +#311474 = SURFACE_STYLE_USAGE(.BOTH.,#311475); +#311475 = SURFACE_SIDE_STYLE('',(#311476)); +#311476 = SURFACE_STYLE_FILL_AREA(#311477); +#311477 = FILL_AREA_STYLE('',(#311478)); +#311478 = FILL_AREA_STYLE_COLOUR('',#280691); +#311479 = CURVE_STYLE('',#311480,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311481 = STYLED_ITEM('color',(#311482),#106287); +#311482 = PRESENTATION_STYLE_ASSIGNMENT((#311483,#311488)); +#311483 = SURFACE_STYLE_USAGE(.BOTH.,#311484); +#311484 = SURFACE_SIDE_STYLE('',(#311485)); +#311485 = SURFACE_STYLE_FILL_AREA(#311486); +#311486 = FILL_AREA_STYLE('',(#311487)); +#311487 = FILL_AREA_STYLE_COLOUR('',#280691); +#311488 = CURVE_STYLE('',#311489,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311490 = STYLED_ITEM('color',(#311491),#106304); +#311491 = PRESENTATION_STYLE_ASSIGNMENT((#311492,#311497)); +#311492 = SURFACE_STYLE_USAGE(.BOTH.,#311493); +#311493 = SURFACE_SIDE_STYLE('',(#311494)); +#311494 = SURFACE_STYLE_FILL_AREA(#311495); +#311495 = FILL_AREA_STYLE('',(#311496)); +#311496 = FILL_AREA_STYLE_COLOUR('',#280691); +#311497 = CURVE_STYLE('',#311498,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311499 = STYLED_ITEM('color',(#311500),#106351); +#311500 = PRESENTATION_STYLE_ASSIGNMENT((#311501,#311506)); +#311501 = SURFACE_STYLE_USAGE(.BOTH.,#311502); +#311502 = SURFACE_SIDE_STYLE('',(#311503)); +#311503 = SURFACE_STYLE_FILL_AREA(#311504); +#311504 = FILL_AREA_STYLE('',(#311505)); +#311505 = FILL_AREA_STYLE_COLOUR('',#279624); +#311506 = CURVE_STYLE('',#311507,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311508 = STYLED_ITEM('color',(#311509),#106382); +#311509 = PRESENTATION_STYLE_ASSIGNMENT((#311510,#311515)); +#311510 = SURFACE_STYLE_USAGE(.BOTH.,#311511); +#311511 = SURFACE_SIDE_STYLE('',(#311512)); +#311512 = SURFACE_STYLE_FILL_AREA(#311513); +#311513 = FILL_AREA_STYLE('',(#311514)); +#311514 = FILL_AREA_STYLE_COLOUR('',#279624); +#311515 = CURVE_STYLE('',#311516,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311517 = OVER_RIDING_STYLED_ITEM('overriding color',(#311518),#106396, + #311508); +#311518 = PRESENTATION_STYLE_ASSIGNMENT((#311519,#311524)); +#311519 = SURFACE_STYLE_USAGE(.BOTH.,#311520); +#311520 = SURFACE_SIDE_STYLE('',(#311521)); +#311521 = SURFACE_STYLE_FILL_AREA(#311522); +#311522 = FILL_AREA_STYLE('',(#311523)); +#311523 = FILL_AREA_STYLE_COLOUR('',#280691); +#311524 = CURVE_STYLE('',#311525,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311526 = OVER_RIDING_STYLED_ITEM('overriding color',(#311527),#106412, + #311508); +#311527 = PRESENTATION_STYLE_ASSIGNMENT((#311528,#311533)); +#311528 = SURFACE_STYLE_USAGE(.BOTH.,#311529); +#311529 = SURFACE_SIDE_STYLE('',(#311530)); +#311530 = SURFACE_STYLE_FILL_AREA(#311531); +#311531 = FILL_AREA_STYLE('',(#311532)); +#311532 = FILL_AREA_STYLE_COLOUR('',#280691); +#311533 = CURVE_STYLE('',#311534,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311535 = STYLED_ITEM('color',(#311536),#106438); +#311536 = PRESENTATION_STYLE_ASSIGNMENT((#311537,#311542)); +#311537 = SURFACE_STYLE_USAGE(.BOTH.,#311538); +#311538 = SURFACE_SIDE_STYLE('',(#311539)); +#311539 = SURFACE_STYLE_FILL_AREA(#311540); +#311540 = FILL_AREA_STYLE('',(#311541)); +#311541 = FILL_AREA_STYLE_COLOUR('',#279624); +#311542 = CURVE_STYLE('',#311543,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311544 = STYLED_ITEM('color',(#311545),#106462); +#311545 = PRESENTATION_STYLE_ASSIGNMENT((#311546,#311551)); +#311546 = SURFACE_STYLE_USAGE(.BOTH.,#311547); +#311547 = SURFACE_SIDE_STYLE('',(#311548)); +#311548 = SURFACE_STYLE_FILL_AREA(#311549); +#311549 = FILL_AREA_STYLE('',(#311550)); +#311550 = FILL_AREA_STYLE_COLOUR('',#279624); +#311551 = CURVE_STYLE('',#311552,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311553 = OVER_RIDING_STYLED_ITEM('overriding color',(#311554),#106476, + #311544); +#311554 = PRESENTATION_STYLE_ASSIGNMENT((#311555,#311560)); +#311555 = SURFACE_STYLE_USAGE(.BOTH.,#311556); +#311556 = SURFACE_SIDE_STYLE('',(#311557)); +#311557 = SURFACE_STYLE_FILL_AREA(#311558); +#311558 = FILL_AREA_STYLE('',(#311559)); +#311559 = FILL_AREA_STYLE_COLOUR('',#280691); +#311560 = CURVE_STYLE('',#311561,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311562 = OVER_RIDING_STYLED_ITEM('overriding color',(#311563),#106492, + #311544); +#311563 = PRESENTATION_STYLE_ASSIGNMENT((#311564,#311569)); +#311564 = SURFACE_STYLE_USAGE(.BOTH.,#311565); +#311565 = SURFACE_SIDE_STYLE('',(#311566)); +#311566 = SURFACE_STYLE_FILL_AREA(#311567); +#311567 = FILL_AREA_STYLE('',(#311568)); +#311568 = FILL_AREA_STYLE_COLOUR('',#280691); +#311569 = CURVE_STYLE('',#311570,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311571 = STYLED_ITEM('color',(#311572),#106511); +#311572 = PRESENTATION_STYLE_ASSIGNMENT((#311573,#311578)); +#311573 = SURFACE_STYLE_USAGE(.BOTH.,#311574); +#311574 = SURFACE_SIDE_STYLE('',(#311575)); +#311575 = SURFACE_STYLE_FILL_AREA(#311576); +#311576 = FILL_AREA_STYLE('',(#311577)); +#311577 = FILL_AREA_STYLE_COLOUR('',#279624); +#311578 = CURVE_STYLE('',#311579,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311580 = STYLED_ITEM('color',(#311581),#106542); +#311581 = PRESENTATION_STYLE_ASSIGNMENT((#311582,#311587)); +#311582 = SURFACE_STYLE_USAGE(.BOTH.,#311583); +#311583 = SURFACE_SIDE_STYLE('',(#311584)); +#311584 = SURFACE_STYLE_FILL_AREA(#311585); +#311585 = FILL_AREA_STYLE('',(#311586)); +#311586 = FILL_AREA_STYLE_COLOUR('',#279624); +#311587 = CURVE_STYLE('',#311588,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311589 = OVER_RIDING_STYLED_ITEM('overriding color',(#311590),#106556, + #311580); +#311590 = PRESENTATION_STYLE_ASSIGNMENT((#311591,#311596)); +#311591 = SURFACE_STYLE_USAGE(.BOTH.,#311592); +#311592 = SURFACE_SIDE_STYLE('',(#311593)); +#311593 = SURFACE_STYLE_FILL_AREA(#311594); +#311594 = FILL_AREA_STYLE('',(#311595)); +#311595 = FILL_AREA_STYLE_COLOUR('',#280691); +#311596 = CURVE_STYLE('',#311597,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311598 = OVER_RIDING_STYLED_ITEM('overriding color',(#311599),#106572, + #311580); +#311599 = PRESENTATION_STYLE_ASSIGNMENT((#311600,#311605)); +#311600 = SURFACE_STYLE_USAGE(.BOTH.,#311601); +#311601 = SURFACE_SIDE_STYLE('',(#311602)); +#311602 = SURFACE_STYLE_FILL_AREA(#311603); +#311603 = FILL_AREA_STYLE('',(#311604)); +#311604 = FILL_AREA_STYLE_COLOUR('',#280691); +#311605 = CURVE_STYLE('',#311606,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311607 = STYLED_ITEM('color',(#311608),#106598); +#311608 = PRESENTATION_STYLE_ASSIGNMENT((#311609,#311614)); +#311609 = SURFACE_STYLE_USAGE(.BOTH.,#311610); +#311610 = SURFACE_SIDE_STYLE('',(#311611)); +#311611 = SURFACE_STYLE_FILL_AREA(#311612); +#311612 = FILL_AREA_STYLE('',(#311613)); +#311613 = FILL_AREA_STYLE_COLOUR('',#279624); +#311614 = CURVE_STYLE('',#311615,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311616 = STYLED_ITEM('color',(#311617),#106622); +#311617 = PRESENTATION_STYLE_ASSIGNMENT((#311618,#311623)); +#311618 = SURFACE_STYLE_USAGE(.BOTH.,#311619); +#311619 = SURFACE_SIDE_STYLE('',(#311620)); +#311620 = SURFACE_STYLE_FILL_AREA(#311621); +#311621 = FILL_AREA_STYLE('',(#311622)); +#311622 = FILL_AREA_STYLE_COLOUR('',#279624); +#311623 = CURVE_STYLE('',#311624,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311625 = OVER_RIDING_STYLED_ITEM('overriding color',(#311626),#106636, + #311616); +#311626 = PRESENTATION_STYLE_ASSIGNMENT((#311627,#311632)); +#311627 = SURFACE_STYLE_USAGE(.BOTH.,#311628); +#311628 = SURFACE_SIDE_STYLE('',(#311629)); +#311629 = SURFACE_STYLE_FILL_AREA(#311630); +#311630 = FILL_AREA_STYLE('',(#311631)); +#311631 = FILL_AREA_STYLE_COLOUR('',#280691); +#311632 = CURVE_STYLE('',#311633,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311634 = OVER_RIDING_STYLED_ITEM('overriding color',(#311635),#106652, + #311616); +#311635 = PRESENTATION_STYLE_ASSIGNMENT((#311636,#311641)); +#311636 = SURFACE_STYLE_USAGE(.BOTH.,#311637); +#311637 = SURFACE_SIDE_STYLE('',(#311638)); +#311638 = SURFACE_STYLE_FILL_AREA(#311639); +#311639 = FILL_AREA_STYLE('',(#311640)); +#311640 = FILL_AREA_STYLE_COLOUR('',#280691); +#311641 = CURVE_STYLE('',#311642,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311643 = STYLED_ITEM('color',(#311644),#106671); +#311644 = PRESENTATION_STYLE_ASSIGNMENT((#311645,#311650)); +#311645 = SURFACE_STYLE_USAGE(.BOTH.,#311646); +#311646 = SURFACE_SIDE_STYLE('',(#311647)); +#311647 = SURFACE_STYLE_FILL_AREA(#311648); +#311648 = FILL_AREA_STYLE('',(#311649)); +#311649 = FILL_AREA_STYLE_COLOUR('',#279624); +#311650 = CURVE_STYLE('',#311651,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311652 = STYLED_ITEM('color',(#311653),#106702); +#311653 = PRESENTATION_STYLE_ASSIGNMENT((#311654,#311659)); +#311654 = SURFACE_STYLE_USAGE(.BOTH.,#311655); +#311655 = SURFACE_SIDE_STYLE('',(#311656)); +#311656 = SURFACE_STYLE_FILL_AREA(#311657); +#311657 = FILL_AREA_STYLE('',(#311658)); +#311658 = FILL_AREA_STYLE_COLOUR('',#279624); +#311659 = CURVE_STYLE('',#311660,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311661 = OVER_RIDING_STYLED_ITEM('overriding color',(#311662),#106716, + #311652); +#311662 = PRESENTATION_STYLE_ASSIGNMENT((#311663,#311668)); +#311663 = SURFACE_STYLE_USAGE(.BOTH.,#311664); +#311664 = SURFACE_SIDE_STYLE('',(#311665)); +#311665 = SURFACE_STYLE_FILL_AREA(#311666); +#311666 = FILL_AREA_STYLE('',(#311667)); +#311667 = FILL_AREA_STYLE_COLOUR('',#280691); +#311668 = CURVE_STYLE('',#311669,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311670 = OVER_RIDING_STYLED_ITEM('overriding color',(#311671),#106732, + #311652); +#311671 = PRESENTATION_STYLE_ASSIGNMENT((#311672,#311677)); +#311672 = SURFACE_STYLE_USAGE(.BOTH.,#311673); +#311673 = SURFACE_SIDE_STYLE('',(#311674)); +#311674 = SURFACE_STYLE_FILL_AREA(#311675); +#311675 = FILL_AREA_STYLE('',(#311676)); +#311676 = FILL_AREA_STYLE_COLOUR('',#280691); +#311677 = CURVE_STYLE('',#311678,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311679 = STYLED_ITEM('color',(#311680),#106758); +#311680 = PRESENTATION_STYLE_ASSIGNMENT((#311681,#311686)); +#311681 = SURFACE_STYLE_USAGE(.BOTH.,#311682); +#311682 = SURFACE_SIDE_STYLE('',(#311683)); +#311683 = SURFACE_STYLE_FILL_AREA(#311684); +#311684 = FILL_AREA_STYLE('',(#311685)); +#311685 = FILL_AREA_STYLE_COLOUR('',#279624); +#311686 = CURVE_STYLE('',#311687,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311688 = STYLED_ITEM('color',(#311689),#106782); +#311689 = PRESENTATION_STYLE_ASSIGNMENT((#311690,#311695)); +#311690 = SURFACE_STYLE_USAGE(.BOTH.,#311691); +#311691 = SURFACE_SIDE_STYLE('',(#311692)); +#311692 = SURFACE_STYLE_FILL_AREA(#311693); +#311693 = FILL_AREA_STYLE('',(#311694)); +#311694 = FILL_AREA_STYLE_COLOUR('',#279624); +#311695 = CURVE_STYLE('',#311696,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311697 = OVER_RIDING_STYLED_ITEM('overriding color',(#311698),#106796, + #311688); +#311698 = PRESENTATION_STYLE_ASSIGNMENT((#311699,#311704)); +#311699 = SURFACE_STYLE_USAGE(.BOTH.,#311700); +#311700 = SURFACE_SIDE_STYLE('',(#311701)); +#311701 = SURFACE_STYLE_FILL_AREA(#311702); +#311702 = FILL_AREA_STYLE('',(#311703)); +#311703 = FILL_AREA_STYLE_COLOUR('',#280691); +#311704 = CURVE_STYLE('',#311705,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311706 = OVER_RIDING_STYLED_ITEM('overriding color',(#311707),#106812, + #311688); +#311707 = PRESENTATION_STYLE_ASSIGNMENT((#311708,#311713)); +#311708 = SURFACE_STYLE_USAGE(.BOTH.,#311709); +#311709 = SURFACE_SIDE_STYLE('',(#311710)); +#311710 = SURFACE_STYLE_FILL_AREA(#311711); +#311711 = FILL_AREA_STYLE('',(#311712)); +#311712 = FILL_AREA_STYLE_COLOUR('',#280691); +#311713 = CURVE_STYLE('',#311714,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311715 = STYLED_ITEM('color',(#311716),#106831); +#311716 = PRESENTATION_STYLE_ASSIGNMENT((#311717,#311722)); +#311717 = SURFACE_STYLE_USAGE(.BOTH.,#311718); +#311718 = SURFACE_SIDE_STYLE('',(#311719)); +#311719 = SURFACE_STYLE_FILL_AREA(#311720); +#311720 = FILL_AREA_STYLE('',(#311721)); +#311721 = FILL_AREA_STYLE_COLOUR('',#279624); +#311722 = CURVE_STYLE('',#311723,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311724 = STYLED_ITEM('color',(#311725),#106862); +#311725 = PRESENTATION_STYLE_ASSIGNMENT((#311726,#311731)); +#311726 = SURFACE_STYLE_USAGE(.BOTH.,#311727); +#311727 = SURFACE_SIDE_STYLE('',(#311728)); +#311728 = SURFACE_STYLE_FILL_AREA(#311729); +#311729 = FILL_AREA_STYLE('',(#311730)); +#311730 = FILL_AREA_STYLE_COLOUR('',#279624); +#311731 = CURVE_STYLE('',#311732,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311733 = OVER_RIDING_STYLED_ITEM('overriding color',(#311734),#106876, + #311724); +#311734 = PRESENTATION_STYLE_ASSIGNMENT((#311735,#311740)); +#311735 = SURFACE_STYLE_USAGE(.BOTH.,#311736); +#311736 = SURFACE_SIDE_STYLE('',(#311737)); +#311737 = SURFACE_STYLE_FILL_AREA(#311738); +#311738 = FILL_AREA_STYLE('',(#311739)); +#311739 = FILL_AREA_STYLE_COLOUR('',#280691); +#311740 = CURVE_STYLE('',#311741,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311742 = OVER_RIDING_STYLED_ITEM('overriding color',(#311743),#106892, + #311724); +#311743 = PRESENTATION_STYLE_ASSIGNMENT((#311744,#311749)); +#311744 = SURFACE_STYLE_USAGE(.BOTH.,#311745); +#311745 = SURFACE_SIDE_STYLE('',(#311746)); +#311746 = SURFACE_STYLE_FILL_AREA(#311747); +#311747 = FILL_AREA_STYLE('',(#311748)); +#311748 = FILL_AREA_STYLE_COLOUR('',#280691); +#311749 = CURVE_STYLE('',#311750,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311751 = STYLED_ITEM('color',(#311752),#106918); +#311752 = PRESENTATION_STYLE_ASSIGNMENT((#311753,#311758)); +#311753 = SURFACE_STYLE_USAGE(.BOTH.,#311754); +#311754 = SURFACE_SIDE_STYLE('',(#311755)); +#311755 = SURFACE_STYLE_FILL_AREA(#311756); +#311756 = FILL_AREA_STYLE('',(#311757)); +#311757 = FILL_AREA_STYLE_COLOUR('',#279624); +#311758 = CURVE_STYLE('',#311759,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311760 = STYLED_ITEM('color',(#311761),#106942); +#311761 = PRESENTATION_STYLE_ASSIGNMENT((#311762,#311767)); +#311762 = SURFACE_STYLE_USAGE(.BOTH.,#311763); +#311763 = SURFACE_SIDE_STYLE('',(#311764)); +#311764 = SURFACE_STYLE_FILL_AREA(#311765); +#311765 = FILL_AREA_STYLE('',(#311766)); +#311766 = FILL_AREA_STYLE_COLOUR('',#279624); +#311767 = CURVE_STYLE('',#311768,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311769 = OVER_RIDING_STYLED_ITEM('overriding color',(#311770),#106956, + #311760); +#311770 = PRESENTATION_STYLE_ASSIGNMENT((#311771,#311776)); +#311771 = SURFACE_STYLE_USAGE(.BOTH.,#311772); +#311772 = SURFACE_SIDE_STYLE('',(#311773)); +#311773 = SURFACE_STYLE_FILL_AREA(#311774); +#311774 = FILL_AREA_STYLE('',(#311775)); +#311775 = FILL_AREA_STYLE_COLOUR('',#280691); +#311776 = CURVE_STYLE('',#311777,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311778 = OVER_RIDING_STYLED_ITEM('overriding color',(#311779),#106972, + #311760); +#311779 = PRESENTATION_STYLE_ASSIGNMENT((#311780,#311785)); +#311780 = SURFACE_STYLE_USAGE(.BOTH.,#311781); +#311781 = SURFACE_SIDE_STYLE('',(#311782)); +#311782 = SURFACE_STYLE_FILL_AREA(#311783); +#311783 = FILL_AREA_STYLE('',(#311784)); +#311784 = FILL_AREA_STYLE_COLOUR('',#280691); +#311785 = CURVE_STYLE('',#311786,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311787 = STYLED_ITEM('color',(#311788),#106991); +#311788 = PRESENTATION_STYLE_ASSIGNMENT((#311789,#311794)); +#311789 = SURFACE_STYLE_USAGE(.BOTH.,#311790); +#311790 = SURFACE_SIDE_STYLE('',(#311791)); +#311791 = SURFACE_STYLE_FILL_AREA(#311792); +#311792 = FILL_AREA_STYLE('',(#311793)); +#311793 = FILL_AREA_STYLE_COLOUR('',#279624); +#311794 = CURVE_STYLE('',#311795,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311796 = STYLED_ITEM('color',(#311797),#107022); +#311797 = PRESENTATION_STYLE_ASSIGNMENT((#311798,#311803)); +#311798 = SURFACE_STYLE_USAGE(.BOTH.,#311799); +#311799 = SURFACE_SIDE_STYLE('',(#311800)); +#311800 = SURFACE_STYLE_FILL_AREA(#311801); +#311801 = FILL_AREA_STYLE('',(#311802)); +#311802 = FILL_AREA_STYLE_COLOUR('',#279624); +#311803 = CURVE_STYLE('',#311804,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311805 = OVER_RIDING_STYLED_ITEM('overriding color',(#311806),#107036, + #311796); +#311806 = PRESENTATION_STYLE_ASSIGNMENT((#311807,#311812)); +#311807 = SURFACE_STYLE_USAGE(.BOTH.,#311808); +#311808 = SURFACE_SIDE_STYLE('',(#311809)); +#311809 = SURFACE_STYLE_FILL_AREA(#311810); +#311810 = FILL_AREA_STYLE('',(#311811)); +#311811 = FILL_AREA_STYLE_COLOUR('',#280691); +#311812 = CURVE_STYLE('',#311813,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311814 = OVER_RIDING_STYLED_ITEM('overriding color',(#311815),#107052, + #311796); +#311815 = PRESENTATION_STYLE_ASSIGNMENT((#311816,#311821)); +#311816 = SURFACE_STYLE_USAGE(.BOTH.,#311817); +#311817 = SURFACE_SIDE_STYLE('',(#311818)); +#311818 = SURFACE_STYLE_FILL_AREA(#311819); +#311819 = FILL_AREA_STYLE('',(#311820)); +#311820 = FILL_AREA_STYLE_COLOUR('',#280691); +#311821 = CURVE_STYLE('',#311822,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311823 = STYLED_ITEM('color',(#311824),#107078); +#311824 = PRESENTATION_STYLE_ASSIGNMENT((#311825,#311830)); +#311825 = SURFACE_STYLE_USAGE(.BOTH.,#311826); +#311826 = SURFACE_SIDE_STYLE('',(#311827)); +#311827 = SURFACE_STYLE_FILL_AREA(#311828); +#311828 = FILL_AREA_STYLE('',(#311829)); +#311829 = FILL_AREA_STYLE_COLOUR('',#279624); +#311830 = CURVE_STYLE('',#311831,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311832 = STYLED_ITEM('color',(#311833),#107102); +#311833 = PRESENTATION_STYLE_ASSIGNMENT((#311834,#311839)); +#311834 = SURFACE_STYLE_USAGE(.BOTH.,#311835); +#311835 = SURFACE_SIDE_STYLE('',(#311836)); +#311836 = SURFACE_STYLE_FILL_AREA(#311837); +#311837 = FILL_AREA_STYLE('',(#311838)); +#311838 = FILL_AREA_STYLE_COLOUR('',#279624); +#311839 = CURVE_STYLE('',#311840,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311841 = OVER_RIDING_STYLED_ITEM('overriding color',(#311842),#107116, + #311832); +#311842 = PRESENTATION_STYLE_ASSIGNMENT((#311843,#311848)); +#311843 = SURFACE_STYLE_USAGE(.BOTH.,#311844); +#311844 = SURFACE_SIDE_STYLE('',(#311845)); +#311845 = SURFACE_STYLE_FILL_AREA(#311846); +#311846 = FILL_AREA_STYLE('',(#311847)); +#311847 = FILL_AREA_STYLE_COLOUR('',#280691); +#311848 = CURVE_STYLE('',#311849,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311850 = OVER_RIDING_STYLED_ITEM('overriding color',(#311851),#107132, + #311832); +#311851 = PRESENTATION_STYLE_ASSIGNMENT((#311852,#311857)); +#311852 = SURFACE_STYLE_USAGE(.BOTH.,#311853); +#311853 = SURFACE_SIDE_STYLE('',(#311854)); +#311854 = SURFACE_STYLE_FILL_AREA(#311855); +#311855 = FILL_AREA_STYLE('',(#311856)); +#311856 = FILL_AREA_STYLE_COLOUR('',#280691); +#311857 = CURVE_STYLE('',#311858,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311859 = STYLED_ITEM('color',(#311860),#107151); +#311860 = PRESENTATION_STYLE_ASSIGNMENT((#311861,#311866)); +#311861 = SURFACE_STYLE_USAGE(.BOTH.,#311862); +#311862 = SURFACE_SIDE_STYLE('',(#311863)); +#311863 = SURFACE_STYLE_FILL_AREA(#311864); +#311864 = FILL_AREA_STYLE('',(#311865)); +#311865 = FILL_AREA_STYLE_COLOUR('',#279624); +#311866 = CURVE_STYLE('',#311867,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311868 = STYLED_ITEM('color',(#311869),#107182); +#311869 = PRESENTATION_STYLE_ASSIGNMENT((#311870,#311875)); +#311870 = SURFACE_STYLE_USAGE(.BOTH.,#311871); +#311871 = SURFACE_SIDE_STYLE('',(#311872)); +#311872 = SURFACE_STYLE_FILL_AREA(#311873); +#311873 = FILL_AREA_STYLE('',(#311874)); +#311874 = FILL_AREA_STYLE_COLOUR('',#279624); +#311875 = CURVE_STYLE('',#311876,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311877 = OVER_RIDING_STYLED_ITEM('overriding color',(#311878),#107196, + #311868); +#311878 = PRESENTATION_STYLE_ASSIGNMENT((#311879,#311884)); +#311879 = SURFACE_STYLE_USAGE(.BOTH.,#311880); +#311880 = SURFACE_SIDE_STYLE('',(#311881)); +#311881 = SURFACE_STYLE_FILL_AREA(#311882); +#311882 = FILL_AREA_STYLE('',(#311883)); +#311883 = FILL_AREA_STYLE_COLOUR('',#280691); +#311884 = CURVE_STYLE('',#311885,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311886 = OVER_RIDING_STYLED_ITEM('overriding color',(#311887),#107212, + #311868); +#311887 = PRESENTATION_STYLE_ASSIGNMENT((#311888,#311893)); +#311888 = SURFACE_STYLE_USAGE(.BOTH.,#311889); +#311889 = SURFACE_SIDE_STYLE('',(#311890)); +#311890 = SURFACE_STYLE_FILL_AREA(#311891); +#311891 = FILL_AREA_STYLE('',(#311892)); +#311892 = FILL_AREA_STYLE_COLOUR('',#280691); +#311893 = CURVE_STYLE('',#311894,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311895 = STYLED_ITEM('color',(#311896),#107238); +#311896 = PRESENTATION_STYLE_ASSIGNMENT((#311897,#311902)); +#311897 = SURFACE_STYLE_USAGE(.BOTH.,#311898); +#311898 = SURFACE_SIDE_STYLE('',(#311899)); +#311899 = SURFACE_STYLE_FILL_AREA(#311900); +#311900 = FILL_AREA_STYLE('',(#311901)); +#311901 = FILL_AREA_STYLE_COLOUR('',#279624); +#311902 = CURVE_STYLE('',#311903,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311904 = STYLED_ITEM('color',(#311905),#107262); +#311905 = PRESENTATION_STYLE_ASSIGNMENT((#311906,#311911)); +#311906 = SURFACE_STYLE_USAGE(.BOTH.,#311907); +#311907 = SURFACE_SIDE_STYLE('',(#311908)); +#311908 = SURFACE_STYLE_FILL_AREA(#311909); +#311909 = FILL_AREA_STYLE('',(#311910)); +#311910 = FILL_AREA_STYLE_COLOUR('',#279624); +#311911 = CURVE_STYLE('',#311912,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311913 = OVER_RIDING_STYLED_ITEM('overriding color',(#311914),#107276, + #311904); +#311914 = PRESENTATION_STYLE_ASSIGNMENT((#311915,#311920)); +#311915 = SURFACE_STYLE_USAGE(.BOTH.,#311916); +#311916 = SURFACE_SIDE_STYLE('',(#311917)); +#311917 = SURFACE_STYLE_FILL_AREA(#311918); +#311918 = FILL_AREA_STYLE('',(#311919)); +#311919 = FILL_AREA_STYLE_COLOUR('',#280691); +#311920 = CURVE_STYLE('',#311921,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311922 = OVER_RIDING_STYLED_ITEM('overriding color',(#311923),#107292, + #311904); +#311923 = PRESENTATION_STYLE_ASSIGNMENT((#311924,#311929)); +#311924 = SURFACE_STYLE_USAGE(.BOTH.,#311925); +#311925 = SURFACE_SIDE_STYLE('',(#311926)); +#311926 = SURFACE_STYLE_FILL_AREA(#311927); +#311927 = FILL_AREA_STYLE('',(#311928)); +#311928 = FILL_AREA_STYLE_COLOUR('',#280691); +#311929 = CURVE_STYLE('',#311930,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311931 = STYLED_ITEM('color',(#311932),#107311); +#311932 = PRESENTATION_STYLE_ASSIGNMENT((#311933,#311938)); +#311933 = SURFACE_STYLE_USAGE(.BOTH.,#311934); +#311934 = SURFACE_SIDE_STYLE('',(#311935)); +#311935 = SURFACE_STYLE_FILL_AREA(#311936); +#311936 = FILL_AREA_STYLE('',(#311937)); +#311937 = FILL_AREA_STYLE_COLOUR('',#279624); +#311938 = CURVE_STYLE('',#311939,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311940 = STYLED_ITEM('color',(#311941),#107342); +#311941 = PRESENTATION_STYLE_ASSIGNMENT((#311942,#311947)); +#311942 = SURFACE_STYLE_USAGE(.BOTH.,#311943); +#311943 = SURFACE_SIDE_STYLE('',(#311944)); +#311944 = SURFACE_STYLE_FILL_AREA(#311945); +#311945 = FILL_AREA_STYLE('',(#311946)); +#311946 = FILL_AREA_STYLE_COLOUR('',#279624); +#311947 = CURVE_STYLE('',#311948,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311949 = OVER_RIDING_STYLED_ITEM('overriding color',(#311950),#107356, + #311940); +#311950 = PRESENTATION_STYLE_ASSIGNMENT((#311951,#311956)); +#311951 = SURFACE_STYLE_USAGE(.BOTH.,#311952); +#311952 = SURFACE_SIDE_STYLE('',(#311953)); +#311953 = SURFACE_STYLE_FILL_AREA(#311954); +#311954 = FILL_AREA_STYLE('',(#311955)); +#311955 = FILL_AREA_STYLE_COLOUR('',#280691); +#311956 = CURVE_STYLE('',#311957,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311958 = OVER_RIDING_STYLED_ITEM('overriding color',(#311959),#107372, + #311940); +#311959 = PRESENTATION_STYLE_ASSIGNMENT((#311960,#311965)); +#311960 = SURFACE_STYLE_USAGE(.BOTH.,#311961); +#311961 = SURFACE_SIDE_STYLE('',(#311962)); +#311962 = SURFACE_STYLE_FILL_AREA(#311963); +#311963 = FILL_AREA_STYLE('',(#311964)); +#311964 = FILL_AREA_STYLE_COLOUR('',#280691); +#311965 = CURVE_STYLE('',#311966,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311967 = STYLED_ITEM('color',(#311968),#107398); +#311968 = PRESENTATION_STYLE_ASSIGNMENT((#311969,#311974)); +#311969 = SURFACE_STYLE_USAGE(.BOTH.,#311970); +#311970 = SURFACE_SIDE_STYLE('',(#311971)); +#311971 = SURFACE_STYLE_FILL_AREA(#311972); +#311972 = FILL_AREA_STYLE('',(#311973)); +#311973 = FILL_AREA_STYLE_COLOUR('',#279624); +#311974 = CURVE_STYLE('',#311975,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311976 = STYLED_ITEM('color',(#311977),#107422); +#311977 = PRESENTATION_STYLE_ASSIGNMENT((#311978,#311983)); +#311978 = SURFACE_STYLE_USAGE(.BOTH.,#311979); +#311979 = SURFACE_SIDE_STYLE('',(#311980)); +#311980 = SURFACE_STYLE_FILL_AREA(#311981); +#311981 = FILL_AREA_STYLE('',(#311982)); +#311982 = FILL_AREA_STYLE_COLOUR('',#279624); +#311983 = CURVE_STYLE('',#311984,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#311984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311985 = OVER_RIDING_STYLED_ITEM('overriding color',(#311986),#107436, + #311976); +#311986 = PRESENTATION_STYLE_ASSIGNMENT((#311987,#311992)); +#311987 = SURFACE_STYLE_USAGE(.BOTH.,#311988); +#311988 = SURFACE_SIDE_STYLE('',(#311989)); +#311989 = SURFACE_STYLE_FILL_AREA(#311990); +#311990 = FILL_AREA_STYLE('',(#311991)); +#311991 = FILL_AREA_STYLE_COLOUR('',#280691); +#311992 = CURVE_STYLE('',#311993,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#311993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311994 = OVER_RIDING_STYLED_ITEM('overriding color',(#311995),#107452, + #311976); +#311995 = PRESENTATION_STYLE_ASSIGNMENT((#311996,#312001)); +#311996 = SURFACE_STYLE_USAGE(.BOTH.,#311997); +#311997 = SURFACE_SIDE_STYLE('',(#311998)); +#311998 = SURFACE_STYLE_FILL_AREA(#311999); +#311999 = FILL_AREA_STYLE('',(#312000)); +#312000 = FILL_AREA_STYLE_COLOUR('',#280691); +#312001 = CURVE_STYLE('',#312002,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312003 = STYLED_ITEM('color',(#312004),#107471); +#312004 = PRESENTATION_STYLE_ASSIGNMENT((#312005,#312010)); +#312005 = SURFACE_STYLE_USAGE(.BOTH.,#312006); +#312006 = SURFACE_SIDE_STYLE('',(#312007)); +#312007 = SURFACE_STYLE_FILL_AREA(#312008); +#312008 = FILL_AREA_STYLE('',(#312009)); +#312009 = FILL_AREA_STYLE_COLOUR('',#279624); +#312010 = CURVE_STYLE('',#312011,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312012 = STYLED_ITEM('color',(#312013),#107502); +#312013 = PRESENTATION_STYLE_ASSIGNMENT((#312014,#312019)); +#312014 = SURFACE_STYLE_USAGE(.BOTH.,#312015); +#312015 = SURFACE_SIDE_STYLE('',(#312016)); +#312016 = SURFACE_STYLE_FILL_AREA(#312017); +#312017 = FILL_AREA_STYLE('',(#312018)); +#312018 = FILL_AREA_STYLE_COLOUR('',#279624); +#312019 = CURVE_STYLE('',#312020,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312021 = OVER_RIDING_STYLED_ITEM('overriding color',(#312022),#107516, + #312012); +#312022 = PRESENTATION_STYLE_ASSIGNMENT((#312023,#312028)); +#312023 = SURFACE_STYLE_USAGE(.BOTH.,#312024); +#312024 = SURFACE_SIDE_STYLE('',(#312025)); +#312025 = SURFACE_STYLE_FILL_AREA(#312026); +#312026 = FILL_AREA_STYLE('',(#312027)); +#312027 = FILL_AREA_STYLE_COLOUR('',#280691); +#312028 = CURVE_STYLE('',#312029,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312030 = OVER_RIDING_STYLED_ITEM('overriding color',(#312031),#107532, + #312012); +#312031 = PRESENTATION_STYLE_ASSIGNMENT((#312032,#312037)); +#312032 = SURFACE_STYLE_USAGE(.BOTH.,#312033); +#312033 = SURFACE_SIDE_STYLE('',(#312034)); +#312034 = SURFACE_STYLE_FILL_AREA(#312035); +#312035 = FILL_AREA_STYLE('',(#312036)); +#312036 = FILL_AREA_STYLE_COLOUR('',#280691); +#312037 = CURVE_STYLE('',#312038,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312039 = STYLED_ITEM('color',(#312040),#107558); +#312040 = PRESENTATION_STYLE_ASSIGNMENT((#312041,#312046)); +#312041 = SURFACE_STYLE_USAGE(.BOTH.,#312042); +#312042 = SURFACE_SIDE_STYLE('',(#312043)); +#312043 = SURFACE_STYLE_FILL_AREA(#312044); +#312044 = FILL_AREA_STYLE('',(#312045)); +#312045 = FILL_AREA_STYLE_COLOUR('',#279624); +#312046 = CURVE_STYLE('',#312047,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312048 = STYLED_ITEM('color',(#312049),#107582); +#312049 = PRESENTATION_STYLE_ASSIGNMENT((#312050,#312055)); +#312050 = SURFACE_STYLE_USAGE(.BOTH.,#312051); +#312051 = SURFACE_SIDE_STYLE('',(#312052)); +#312052 = SURFACE_STYLE_FILL_AREA(#312053); +#312053 = FILL_AREA_STYLE('',(#312054)); +#312054 = FILL_AREA_STYLE_COLOUR('',#279624); +#312055 = CURVE_STYLE('',#312056,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312057 = OVER_RIDING_STYLED_ITEM('overriding color',(#312058),#107596, + #312048); +#312058 = PRESENTATION_STYLE_ASSIGNMENT((#312059,#312064)); +#312059 = SURFACE_STYLE_USAGE(.BOTH.,#312060); +#312060 = SURFACE_SIDE_STYLE('',(#312061)); +#312061 = SURFACE_STYLE_FILL_AREA(#312062); +#312062 = FILL_AREA_STYLE('',(#312063)); +#312063 = FILL_AREA_STYLE_COLOUR('',#280691); +#312064 = CURVE_STYLE('',#312065,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312066 = OVER_RIDING_STYLED_ITEM('overriding color',(#312067),#107612, + #312048); +#312067 = PRESENTATION_STYLE_ASSIGNMENT((#312068,#312073)); +#312068 = SURFACE_STYLE_USAGE(.BOTH.,#312069); +#312069 = SURFACE_SIDE_STYLE('',(#312070)); +#312070 = SURFACE_STYLE_FILL_AREA(#312071); +#312071 = FILL_AREA_STYLE('',(#312072)); +#312072 = FILL_AREA_STYLE_COLOUR('',#280691); +#312073 = CURVE_STYLE('',#312074,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312075 = STYLED_ITEM('color',(#312076),#107631); +#312076 = PRESENTATION_STYLE_ASSIGNMENT((#312077,#312082)); +#312077 = SURFACE_STYLE_USAGE(.BOTH.,#312078); +#312078 = SURFACE_SIDE_STYLE('',(#312079)); +#312079 = SURFACE_STYLE_FILL_AREA(#312080); +#312080 = FILL_AREA_STYLE('',(#312081)); +#312081 = FILL_AREA_STYLE_COLOUR('',#280691); +#312082 = CURVE_STYLE('',#312083,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312084 = STYLED_ITEM('color',(#312085),#107648); +#312085 = PRESENTATION_STYLE_ASSIGNMENT((#312086,#312091)); +#312086 = SURFACE_STYLE_USAGE(.BOTH.,#312087); +#312087 = SURFACE_SIDE_STYLE('',(#312088)); +#312088 = SURFACE_STYLE_FILL_AREA(#312089); +#312089 = FILL_AREA_STYLE('',(#312090)); +#312090 = FILL_AREA_STYLE_COLOUR('',#280691); +#312091 = CURVE_STYLE('',#312092,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312093 = STYLED_ITEM('color',(#312094),#107665); +#312094 = PRESENTATION_STYLE_ASSIGNMENT((#312095,#312100)); +#312095 = SURFACE_STYLE_USAGE(.BOTH.,#312096); +#312096 = SURFACE_SIDE_STYLE('',(#312097)); +#312097 = SURFACE_STYLE_FILL_AREA(#312098); +#312098 = FILL_AREA_STYLE('',(#312099)); +#312099 = FILL_AREA_STYLE_COLOUR('',#280691); +#312100 = CURVE_STYLE('',#312101,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312102 = STYLED_ITEM('color',(#312103),#107682); +#312103 = PRESENTATION_STYLE_ASSIGNMENT((#312104,#312109)); +#312104 = SURFACE_STYLE_USAGE(.BOTH.,#312105); +#312105 = SURFACE_SIDE_STYLE('',(#312106)); +#312106 = SURFACE_STYLE_FILL_AREA(#312107); +#312107 = FILL_AREA_STYLE('',(#312108)); +#312108 = FILL_AREA_STYLE_COLOUR('',#280691); +#312109 = CURVE_STYLE('',#312110,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312111 = STYLED_ITEM('color',(#312112),#107699); +#312112 = PRESENTATION_STYLE_ASSIGNMENT((#312113,#312118)); +#312113 = SURFACE_STYLE_USAGE(.BOTH.,#312114); +#312114 = SURFACE_SIDE_STYLE('',(#312115)); +#312115 = SURFACE_STYLE_FILL_AREA(#312116); +#312116 = FILL_AREA_STYLE('',(#312117)); +#312117 = FILL_AREA_STYLE_COLOUR('',#280691); +#312118 = CURVE_STYLE('',#312119,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312120 = STYLED_ITEM('color',(#312121),#107711); +#312121 = PRESENTATION_STYLE_ASSIGNMENT((#312122,#312127)); +#312122 = SURFACE_STYLE_USAGE(.BOTH.,#312123); +#312123 = SURFACE_SIDE_STYLE('',(#312124)); +#312124 = SURFACE_STYLE_FILL_AREA(#312125); +#312125 = FILL_AREA_STYLE('',(#312126)); +#312126 = FILL_AREA_STYLE_COLOUR('',#280691); +#312127 = CURVE_STYLE('',#312128,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312129 = STYLED_ITEM('color',(#312130),#107728); +#312130 = PRESENTATION_STYLE_ASSIGNMENT((#312131,#312136)); +#312131 = SURFACE_STYLE_USAGE(.BOTH.,#312132); +#312132 = SURFACE_SIDE_STYLE('',(#312133)); +#312133 = SURFACE_STYLE_FILL_AREA(#312134); +#312134 = FILL_AREA_STYLE('',(#312135)); +#312135 = FILL_AREA_STYLE_COLOUR('',#280691); +#312136 = CURVE_STYLE('',#312137,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312138 = STYLED_ITEM('color',(#312139),#107745); +#312139 = PRESENTATION_STYLE_ASSIGNMENT((#312140,#312145)); +#312140 = SURFACE_STYLE_USAGE(.BOTH.,#312141); +#312141 = SURFACE_SIDE_STYLE('',(#312142)); +#312142 = SURFACE_STYLE_FILL_AREA(#312143); +#312143 = FILL_AREA_STYLE('',(#312144)); +#312144 = FILL_AREA_STYLE_COLOUR('',#280691); +#312145 = CURVE_STYLE('',#312146,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312147 = STYLED_ITEM('color',(#312148),#107762); +#312148 = PRESENTATION_STYLE_ASSIGNMENT((#312149,#312154)); +#312149 = SURFACE_STYLE_USAGE(.BOTH.,#312150); +#312150 = SURFACE_SIDE_STYLE('',(#312151)); +#312151 = SURFACE_STYLE_FILL_AREA(#312152); +#312152 = FILL_AREA_STYLE('',(#312153)); +#312153 = FILL_AREA_STYLE_COLOUR('',#280691); +#312154 = CURVE_STYLE('',#312155,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312156 = STYLED_ITEM('color',(#312157),#107779); +#312157 = PRESENTATION_STYLE_ASSIGNMENT((#312158,#312163)); +#312158 = SURFACE_STYLE_USAGE(.BOTH.,#312159); +#312159 = SURFACE_SIDE_STYLE('',(#312160)); +#312160 = SURFACE_STYLE_FILL_AREA(#312161); +#312161 = FILL_AREA_STYLE('',(#312162)); +#312162 = FILL_AREA_STYLE_COLOUR('',#280691); +#312163 = CURVE_STYLE('',#312164,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312165 = STYLED_ITEM('color',(#312166),#107791); +#312166 = PRESENTATION_STYLE_ASSIGNMENT((#312167,#312172)); +#312167 = SURFACE_STYLE_USAGE(.BOTH.,#312168); +#312168 = SURFACE_SIDE_STYLE('',(#312169)); +#312169 = SURFACE_STYLE_FILL_AREA(#312170); +#312170 = FILL_AREA_STYLE('',(#312171)); +#312171 = FILL_AREA_STYLE_COLOUR('',#280691); +#312172 = CURVE_STYLE('',#312173,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312174 = STYLED_ITEM('color',(#312175),#107808); +#312175 = PRESENTATION_STYLE_ASSIGNMENT((#312176,#312181)); +#312176 = SURFACE_STYLE_USAGE(.BOTH.,#312177); +#312177 = SURFACE_SIDE_STYLE('',(#312178)); +#312178 = SURFACE_STYLE_FILL_AREA(#312179); +#312179 = FILL_AREA_STYLE('',(#312180)); +#312180 = FILL_AREA_STYLE_COLOUR('',#280691); +#312181 = CURVE_STYLE('',#312182,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312183 = STYLED_ITEM('color',(#312184),#107825); +#312184 = PRESENTATION_STYLE_ASSIGNMENT((#312185,#312190)); +#312185 = SURFACE_STYLE_USAGE(.BOTH.,#312186); +#312186 = SURFACE_SIDE_STYLE('',(#312187)); +#312187 = SURFACE_STYLE_FILL_AREA(#312188); +#312188 = FILL_AREA_STYLE('',(#312189)); +#312189 = FILL_AREA_STYLE_COLOUR('',#280691); +#312190 = CURVE_STYLE('',#312191,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312192 = STYLED_ITEM('color',(#312193),#107842); +#312193 = PRESENTATION_STYLE_ASSIGNMENT((#312194,#312199)); +#312194 = SURFACE_STYLE_USAGE(.BOTH.,#312195); +#312195 = SURFACE_SIDE_STYLE('',(#312196)); +#312196 = SURFACE_STYLE_FILL_AREA(#312197); +#312197 = FILL_AREA_STYLE('',(#312198)); +#312198 = FILL_AREA_STYLE_COLOUR('',#280691); +#312199 = CURVE_STYLE('',#312200,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312201 = STYLED_ITEM('color',(#312202),#107859); +#312202 = PRESENTATION_STYLE_ASSIGNMENT((#312203,#312208)); +#312203 = SURFACE_STYLE_USAGE(.BOTH.,#312204); +#312204 = SURFACE_SIDE_STYLE('',(#312205)); +#312205 = SURFACE_STYLE_FILL_AREA(#312206); +#312206 = FILL_AREA_STYLE('',(#312207)); +#312207 = FILL_AREA_STYLE_COLOUR('',#280691); +#312208 = CURVE_STYLE('',#312209,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312210 = STYLED_ITEM('color',(#312211),#107871); +#312211 = PRESENTATION_STYLE_ASSIGNMENT((#312212,#312217)); +#312212 = SURFACE_STYLE_USAGE(.BOTH.,#312213); +#312213 = SURFACE_SIDE_STYLE('',(#312214)); +#312214 = SURFACE_STYLE_FILL_AREA(#312215); +#312215 = FILL_AREA_STYLE('',(#312216)); +#312216 = FILL_AREA_STYLE_COLOUR('',#280691); +#312217 = CURVE_STYLE('',#312218,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312219 = STYLED_ITEM('color',(#312220),#107888); +#312220 = PRESENTATION_STYLE_ASSIGNMENT((#312221,#312226)); +#312221 = SURFACE_STYLE_USAGE(.BOTH.,#312222); +#312222 = SURFACE_SIDE_STYLE('',(#312223)); +#312223 = SURFACE_STYLE_FILL_AREA(#312224); +#312224 = FILL_AREA_STYLE('',(#312225)); +#312225 = FILL_AREA_STYLE_COLOUR('',#280691); +#312226 = CURVE_STYLE('',#312227,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312228 = STYLED_ITEM('color',(#312229),#107905); +#312229 = PRESENTATION_STYLE_ASSIGNMENT((#312230,#312235)); +#312230 = SURFACE_STYLE_USAGE(.BOTH.,#312231); +#312231 = SURFACE_SIDE_STYLE('',(#312232)); +#312232 = SURFACE_STYLE_FILL_AREA(#312233); +#312233 = FILL_AREA_STYLE('',(#312234)); +#312234 = FILL_AREA_STYLE_COLOUR('',#280691); +#312235 = CURVE_STYLE('',#312236,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312237 = STYLED_ITEM('color',(#312238),#107922); +#312238 = PRESENTATION_STYLE_ASSIGNMENT((#312239,#312244)); +#312239 = SURFACE_STYLE_USAGE(.BOTH.,#312240); +#312240 = SURFACE_SIDE_STYLE('',(#312241)); +#312241 = SURFACE_STYLE_FILL_AREA(#312242); +#312242 = FILL_AREA_STYLE('',(#312243)); +#312243 = FILL_AREA_STYLE_COLOUR('',#280691); +#312244 = CURVE_STYLE('',#312245,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312246 = STYLED_ITEM('color',(#312247),#107939); +#312247 = PRESENTATION_STYLE_ASSIGNMENT((#312248,#312253)); +#312248 = SURFACE_STYLE_USAGE(.BOTH.,#312249); +#312249 = SURFACE_SIDE_STYLE('',(#312250)); +#312250 = SURFACE_STYLE_FILL_AREA(#312251); +#312251 = FILL_AREA_STYLE('',(#312252)); +#312252 = FILL_AREA_STYLE_COLOUR('',#280691); +#312253 = CURVE_STYLE('',#312254,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312255 = STYLED_ITEM('color',(#312256),#107951); +#312256 = PRESENTATION_STYLE_ASSIGNMENT((#312257,#312262)); +#312257 = SURFACE_STYLE_USAGE(.BOTH.,#312258); +#312258 = SURFACE_SIDE_STYLE('',(#312259)); +#312259 = SURFACE_STYLE_FILL_AREA(#312260); +#312260 = FILL_AREA_STYLE('',(#312261)); +#312261 = FILL_AREA_STYLE_COLOUR('',#280691); +#312262 = CURVE_STYLE('',#312263,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312264 = STYLED_ITEM('color',(#312265),#107968); +#312265 = PRESENTATION_STYLE_ASSIGNMENT((#312266,#312271)); +#312266 = SURFACE_STYLE_USAGE(.BOTH.,#312267); +#312267 = SURFACE_SIDE_STYLE('',(#312268)); +#312268 = SURFACE_STYLE_FILL_AREA(#312269); +#312269 = FILL_AREA_STYLE('',(#312270)); +#312270 = FILL_AREA_STYLE_COLOUR('',#280691); +#312271 = CURVE_STYLE('',#312272,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312273 = STYLED_ITEM('color',(#312274),#107985); +#312274 = PRESENTATION_STYLE_ASSIGNMENT((#312275,#312280)); +#312275 = SURFACE_STYLE_USAGE(.BOTH.,#312276); +#312276 = SURFACE_SIDE_STYLE('',(#312277)); +#312277 = SURFACE_STYLE_FILL_AREA(#312278); +#312278 = FILL_AREA_STYLE('',(#312279)); +#312279 = FILL_AREA_STYLE_COLOUR('',#280691); +#312280 = CURVE_STYLE('',#312281,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312282 = STYLED_ITEM('color',(#312283),#108002); +#312283 = PRESENTATION_STYLE_ASSIGNMENT((#312284,#312289)); +#312284 = SURFACE_STYLE_USAGE(.BOTH.,#312285); +#312285 = SURFACE_SIDE_STYLE('',(#312286)); +#312286 = SURFACE_STYLE_FILL_AREA(#312287); +#312287 = FILL_AREA_STYLE('',(#312288)); +#312288 = FILL_AREA_STYLE_COLOUR('',#280691); +#312289 = CURVE_STYLE('',#312290,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312291 = STYLED_ITEM('color',(#312292),#108019); +#312292 = PRESENTATION_STYLE_ASSIGNMENT((#312293,#312298)); +#312293 = SURFACE_STYLE_USAGE(.BOTH.,#312294); +#312294 = SURFACE_SIDE_STYLE('',(#312295)); +#312295 = SURFACE_STYLE_FILL_AREA(#312296); +#312296 = FILL_AREA_STYLE('',(#312297)); +#312297 = FILL_AREA_STYLE_COLOUR('',#280691); +#312298 = CURVE_STYLE('',#312299,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312300 = STYLED_ITEM('color',(#312301),#108031); +#312301 = PRESENTATION_STYLE_ASSIGNMENT((#312302,#312307)); +#312302 = SURFACE_STYLE_USAGE(.BOTH.,#312303); +#312303 = SURFACE_SIDE_STYLE('',(#312304)); +#312304 = SURFACE_STYLE_FILL_AREA(#312305); +#312305 = FILL_AREA_STYLE('',(#312306)); +#312306 = FILL_AREA_STYLE_COLOUR('',#280691); +#312307 = CURVE_STYLE('',#312308,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312309 = STYLED_ITEM('color',(#312310),#108048); +#312310 = PRESENTATION_STYLE_ASSIGNMENT((#312311,#312316)); +#312311 = SURFACE_STYLE_USAGE(.BOTH.,#312312); +#312312 = SURFACE_SIDE_STYLE('',(#312313)); +#312313 = SURFACE_STYLE_FILL_AREA(#312314); +#312314 = FILL_AREA_STYLE('',(#312315)); +#312315 = FILL_AREA_STYLE_COLOUR('',#280691); +#312316 = CURVE_STYLE('',#312317,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312318 = STYLED_ITEM('color',(#312319),#108065); +#312319 = PRESENTATION_STYLE_ASSIGNMENT((#312320,#312325)); +#312320 = SURFACE_STYLE_USAGE(.BOTH.,#312321); +#312321 = SURFACE_SIDE_STYLE('',(#312322)); +#312322 = SURFACE_STYLE_FILL_AREA(#312323); +#312323 = FILL_AREA_STYLE('',(#312324)); +#312324 = FILL_AREA_STYLE_COLOUR('',#280691); +#312325 = CURVE_STYLE('',#312326,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312327 = STYLED_ITEM('color',(#312328),#108082); +#312328 = PRESENTATION_STYLE_ASSIGNMENT((#312329,#312334)); +#312329 = SURFACE_STYLE_USAGE(.BOTH.,#312330); +#312330 = SURFACE_SIDE_STYLE('',(#312331)); +#312331 = SURFACE_STYLE_FILL_AREA(#312332); +#312332 = FILL_AREA_STYLE('',(#312333)); +#312333 = FILL_AREA_STYLE_COLOUR('',#280691); +#312334 = CURVE_STYLE('',#312335,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312336 = STYLED_ITEM('color',(#312337),#108099); +#312337 = PRESENTATION_STYLE_ASSIGNMENT((#312338,#312343)); +#312338 = SURFACE_STYLE_USAGE(.BOTH.,#312339); +#312339 = SURFACE_SIDE_STYLE('',(#312340)); +#312340 = SURFACE_STYLE_FILL_AREA(#312341); +#312341 = FILL_AREA_STYLE('',(#312342)); +#312342 = FILL_AREA_STYLE_COLOUR('',#280691); +#312343 = CURVE_STYLE('',#312344,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312345 = STYLED_ITEM('color',(#312346),#108111); +#312346 = PRESENTATION_STYLE_ASSIGNMENT((#312347,#312352)); +#312347 = SURFACE_STYLE_USAGE(.BOTH.,#312348); +#312348 = SURFACE_SIDE_STYLE('',(#312349)); +#312349 = SURFACE_STYLE_FILL_AREA(#312350); +#312350 = FILL_AREA_STYLE('',(#312351)); +#312351 = FILL_AREA_STYLE_COLOUR('',#280691); +#312352 = CURVE_STYLE('',#312353,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312354 = STYLED_ITEM('color',(#312355),#108128); +#312355 = PRESENTATION_STYLE_ASSIGNMENT((#312356,#312361)); +#312356 = SURFACE_STYLE_USAGE(.BOTH.,#312357); +#312357 = SURFACE_SIDE_STYLE('',(#312358)); +#312358 = SURFACE_STYLE_FILL_AREA(#312359); +#312359 = FILL_AREA_STYLE('',(#312360)); +#312360 = FILL_AREA_STYLE_COLOUR('',#280691); +#312361 = CURVE_STYLE('',#312362,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312363 = STYLED_ITEM('color',(#312364),#108145); +#312364 = PRESENTATION_STYLE_ASSIGNMENT((#312365,#312370)); +#312365 = SURFACE_STYLE_USAGE(.BOTH.,#312366); +#312366 = SURFACE_SIDE_STYLE('',(#312367)); +#312367 = SURFACE_STYLE_FILL_AREA(#312368); +#312368 = FILL_AREA_STYLE('',(#312369)); +#312369 = FILL_AREA_STYLE_COLOUR('',#280691); +#312370 = CURVE_STYLE('',#312371,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312372 = STYLED_ITEM('color',(#312373),#108162); +#312373 = PRESENTATION_STYLE_ASSIGNMENT((#312374,#312379)); +#312374 = SURFACE_STYLE_USAGE(.BOTH.,#312375); +#312375 = SURFACE_SIDE_STYLE('',(#312376)); +#312376 = SURFACE_STYLE_FILL_AREA(#312377); +#312377 = FILL_AREA_STYLE('',(#312378)); +#312378 = FILL_AREA_STYLE_COLOUR('',#280691); +#312379 = CURVE_STYLE('',#312380,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312381 = STYLED_ITEM('color',(#312382),#108179); +#312382 = PRESENTATION_STYLE_ASSIGNMENT((#312383,#312388)); +#312383 = SURFACE_STYLE_USAGE(.BOTH.,#312384); +#312384 = SURFACE_SIDE_STYLE('',(#312385)); +#312385 = SURFACE_STYLE_FILL_AREA(#312386); +#312386 = FILL_AREA_STYLE('',(#312387)); +#312387 = FILL_AREA_STYLE_COLOUR('',#280691); +#312388 = CURVE_STYLE('',#312389,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312390 = STYLED_ITEM('color',(#312391),#108191); +#312391 = PRESENTATION_STYLE_ASSIGNMENT((#312392,#312397)); +#312392 = SURFACE_STYLE_USAGE(.BOTH.,#312393); +#312393 = SURFACE_SIDE_STYLE('',(#312394)); +#312394 = SURFACE_STYLE_FILL_AREA(#312395); +#312395 = FILL_AREA_STYLE('',(#312396)); +#312396 = FILL_AREA_STYLE_COLOUR('',#280691); +#312397 = CURVE_STYLE('',#312398,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312399 = STYLED_ITEM('color',(#312400),#108208); +#312400 = PRESENTATION_STYLE_ASSIGNMENT((#312401,#312406)); +#312401 = SURFACE_STYLE_USAGE(.BOTH.,#312402); +#312402 = SURFACE_SIDE_STYLE('',(#312403)); +#312403 = SURFACE_STYLE_FILL_AREA(#312404); +#312404 = FILL_AREA_STYLE('',(#312405)); +#312405 = FILL_AREA_STYLE_COLOUR('',#280691); +#312406 = CURVE_STYLE('',#312407,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312408 = STYLED_ITEM('color',(#312409),#108225); +#312409 = PRESENTATION_STYLE_ASSIGNMENT((#312410,#312415)); +#312410 = SURFACE_STYLE_USAGE(.BOTH.,#312411); +#312411 = SURFACE_SIDE_STYLE('',(#312412)); +#312412 = SURFACE_STYLE_FILL_AREA(#312413); +#312413 = FILL_AREA_STYLE('',(#312414)); +#312414 = FILL_AREA_STYLE_COLOUR('',#280691); +#312415 = CURVE_STYLE('',#312416,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312417 = STYLED_ITEM('color',(#312418),#108242); +#312418 = PRESENTATION_STYLE_ASSIGNMENT((#312419,#312424)); +#312419 = SURFACE_STYLE_USAGE(.BOTH.,#312420); +#312420 = SURFACE_SIDE_STYLE('',(#312421)); +#312421 = SURFACE_STYLE_FILL_AREA(#312422); +#312422 = FILL_AREA_STYLE('',(#312423)); +#312423 = FILL_AREA_STYLE_COLOUR('',#280691); +#312424 = CURVE_STYLE('',#312425,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312426 = STYLED_ITEM('color',(#312427),#108259); +#312427 = PRESENTATION_STYLE_ASSIGNMENT((#312428,#312433)); +#312428 = SURFACE_STYLE_USAGE(.BOTH.,#312429); +#312429 = SURFACE_SIDE_STYLE('',(#312430)); +#312430 = SURFACE_STYLE_FILL_AREA(#312431); +#312431 = FILL_AREA_STYLE('',(#312432)); +#312432 = FILL_AREA_STYLE_COLOUR('',#280691); +#312433 = CURVE_STYLE('',#312434,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312435 = STYLED_ITEM('color',(#312436),#108271); +#312436 = PRESENTATION_STYLE_ASSIGNMENT((#312437,#312442)); +#312437 = SURFACE_STYLE_USAGE(.BOTH.,#312438); +#312438 = SURFACE_SIDE_STYLE('',(#312439)); +#312439 = SURFACE_STYLE_FILL_AREA(#312440); +#312440 = FILL_AREA_STYLE('',(#312441)); +#312441 = FILL_AREA_STYLE_COLOUR('',#279624); +#312442 = CURVE_STYLE('',#312443,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312444 = OVER_RIDING_STYLED_ITEM('overriding color',(#312445),#108278, + #312435); +#312445 = PRESENTATION_STYLE_ASSIGNMENT((#312446,#312451)); +#312446 = SURFACE_STYLE_USAGE(.BOTH.,#312447); +#312447 = SURFACE_SIDE_STYLE('',(#312448)); +#312448 = SURFACE_STYLE_FILL_AREA(#312449); +#312449 = FILL_AREA_STYLE('',(#312450)); +#312450 = FILL_AREA_STYLE_COLOUR('',#280691); +#312451 = CURVE_STYLE('',#312452,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312453 = STYLED_ITEM('color',(#312454),#108288); +#312454 = PRESENTATION_STYLE_ASSIGNMENT((#312455,#312460)); +#312455 = SURFACE_STYLE_USAGE(.BOTH.,#312456); +#312456 = SURFACE_SIDE_STYLE('',(#312457)); +#312457 = SURFACE_STYLE_FILL_AREA(#312458); +#312458 = FILL_AREA_STYLE('',(#312459)); +#312459 = FILL_AREA_STYLE_COLOUR('',#279624); +#312460 = CURVE_STYLE('',#312461,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312462 = OVER_RIDING_STYLED_ITEM('overriding color',(#312463),#108293, + #312453); +#312463 = PRESENTATION_STYLE_ASSIGNMENT((#312464,#312469)); +#312464 = SURFACE_STYLE_USAGE(.BOTH.,#312465); +#312465 = SURFACE_SIDE_STYLE('',(#312466)); +#312466 = SURFACE_STYLE_FILL_AREA(#312467); +#312467 = FILL_AREA_STYLE('',(#312468)); +#312468 = FILL_AREA_STYLE_COLOUR('',#280691); +#312469 = CURVE_STYLE('',#312470,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312471 = STYLED_ITEM('color',(#312472),#108305); +#312472 = PRESENTATION_STYLE_ASSIGNMENT((#312473,#312478)); +#312473 = SURFACE_STYLE_USAGE(.BOTH.,#312474); +#312474 = SURFACE_SIDE_STYLE('',(#312475)); +#312475 = SURFACE_STYLE_FILL_AREA(#312476); +#312476 = FILL_AREA_STYLE('',(#312477)); +#312477 = FILL_AREA_STYLE_COLOUR('',#280691); +#312478 = CURVE_STYLE('',#312479,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312480 = STYLED_ITEM('color',(#312481),#108354); +#312481 = PRESENTATION_STYLE_ASSIGNMENT((#312482,#312487)); +#312482 = SURFACE_STYLE_USAGE(.BOTH.,#312483); +#312483 = SURFACE_SIDE_STYLE('',(#312484)); +#312484 = SURFACE_STYLE_FILL_AREA(#312485); +#312485 = FILL_AREA_STYLE('',(#312486)); +#312486 = FILL_AREA_STYLE_COLOUR('',#280691); +#312487 = CURVE_STYLE('',#312488,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312489 = STYLED_ITEM('color',(#312490),#108378); +#312490 = PRESENTATION_STYLE_ASSIGNMENT((#312491,#312496)); +#312491 = SURFACE_STYLE_USAGE(.BOTH.,#312492); +#312492 = SURFACE_SIDE_STYLE('',(#312493)); +#312493 = SURFACE_STYLE_FILL_AREA(#312494); +#312494 = FILL_AREA_STYLE('',(#312495)); +#312495 = FILL_AREA_STYLE_COLOUR('',#280691); +#312496 = CURVE_STYLE('',#312497,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312498 = STYLED_ITEM('color',(#312499),#108420); +#312499 = PRESENTATION_STYLE_ASSIGNMENT((#312500,#312505)); +#312500 = SURFACE_STYLE_USAGE(.BOTH.,#312501); +#312501 = SURFACE_SIDE_STYLE('',(#312502)); +#312502 = SURFACE_STYLE_FILL_AREA(#312503); +#312503 = FILL_AREA_STYLE('',(#312504)); +#312504 = FILL_AREA_STYLE_COLOUR('',#280691); +#312505 = CURVE_STYLE('',#312506,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312507 = STYLED_ITEM('color',(#312508),#108437); +#312508 = PRESENTATION_STYLE_ASSIGNMENT((#312509,#312514)); +#312509 = SURFACE_STYLE_USAGE(.BOTH.,#312510); +#312510 = SURFACE_SIDE_STYLE('',(#312511)); +#312511 = SURFACE_STYLE_FILL_AREA(#312512); +#312512 = FILL_AREA_STYLE('',(#312513)); +#312513 = FILL_AREA_STYLE_COLOUR('',#279624); +#312514 = CURVE_STYLE('',#312515,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312516 = OVER_RIDING_STYLED_ITEM('overriding color',(#312517),#108444, + #312507); +#312517 = PRESENTATION_STYLE_ASSIGNMENT((#312518,#312523)); +#312518 = SURFACE_STYLE_USAGE(.BOTH.,#312519); +#312519 = SURFACE_SIDE_STYLE('',(#312520)); +#312520 = SURFACE_STYLE_FILL_AREA(#312521); +#312521 = FILL_AREA_STYLE('',(#312522)); +#312522 = FILL_AREA_STYLE_COLOUR('',#280691); +#312523 = CURVE_STYLE('',#312524,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312525 = STYLED_ITEM('color',(#312526),#108454); +#312526 = PRESENTATION_STYLE_ASSIGNMENT((#312527,#312532)); +#312527 = SURFACE_STYLE_USAGE(.BOTH.,#312528); +#312528 = SURFACE_SIDE_STYLE('',(#312529)); +#312529 = SURFACE_STYLE_FILL_AREA(#312530); +#312530 = FILL_AREA_STYLE('',(#312531)); +#312531 = FILL_AREA_STYLE_COLOUR('',#279624); +#312532 = CURVE_STYLE('',#312533,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312534 = OVER_RIDING_STYLED_ITEM('overriding color',(#312535),#108459, + #312525); +#312535 = PRESENTATION_STYLE_ASSIGNMENT((#312536,#312541)); +#312536 = SURFACE_STYLE_USAGE(.BOTH.,#312537); +#312537 = SURFACE_SIDE_STYLE('',(#312538)); +#312538 = SURFACE_STYLE_FILL_AREA(#312539); +#312539 = FILL_AREA_STYLE('',(#312540)); +#312540 = FILL_AREA_STYLE_COLOUR('',#280691); +#312541 = CURVE_STYLE('',#312542,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312543 = STYLED_ITEM('color',(#312544),#108471); +#312544 = PRESENTATION_STYLE_ASSIGNMENT((#312545,#312550)); +#312545 = SURFACE_STYLE_USAGE(.BOTH.,#312546); +#312546 = SURFACE_SIDE_STYLE('',(#312547)); +#312547 = SURFACE_STYLE_FILL_AREA(#312548); +#312548 = FILL_AREA_STYLE('',(#312549)); +#312549 = FILL_AREA_STYLE_COLOUR('',#280691); +#312550 = CURVE_STYLE('',#312551,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312552 = STYLED_ITEM('color',(#312553),#108520); +#312553 = PRESENTATION_STYLE_ASSIGNMENT((#312554,#312559)); +#312554 = SURFACE_STYLE_USAGE(.BOTH.,#312555); +#312555 = SURFACE_SIDE_STYLE('',(#312556)); +#312556 = SURFACE_STYLE_FILL_AREA(#312557); +#312557 = FILL_AREA_STYLE('',(#312558)); +#312558 = FILL_AREA_STYLE_COLOUR('',#280691); +#312559 = CURVE_STYLE('',#312560,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312561 = STYLED_ITEM('color',(#312562),#108544); +#312562 = PRESENTATION_STYLE_ASSIGNMENT((#312563,#312568)); +#312563 = SURFACE_STYLE_USAGE(.BOTH.,#312564); +#312564 = SURFACE_SIDE_STYLE('',(#312565)); +#312565 = SURFACE_STYLE_FILL_AREA(#312566); +#312566 = FILL_AREA_STYLE('',(#312567)); +#312567 = FILL_AREA_STYLE_COLOUR('',#280691); +#312568 = CURVE_STYLE('',#312569,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312570 = STYLED_ITEM('color',(#312571),#108586); +#312571 = PRESENTATION_STYLE_ASSIGNMENT((#312572,#312577)); +#312572 = SURFACE_STYLE_USAGE(.BOTH.,#312573); +#312573 = SURFACE_SIDE_STYLE('',(#312574)); +#312574 = SURFACE_STYLE_FILL_AREA(#312575); +#312575 = FILL_AREA_STYLE('',(#312576)); +#312576 = FILL_AREA_STYLE_COLOUR('',#280691); +#312577 = CURVE_STYLE('',#312578,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312579 = STYLED_ITEM('color',(#312580),#108603); +#312580 = PRESENTATION_STYLE_ASSIGNMENT((#312581,#312586)); +#312581 = SURFACE_STYLE_USAGE(.BOTH.,#312582); +#312582 = SURFACE_SIDE_STYLE('',(#312583)); +#312583 = SURFACE_STYLE_FILL_AREA(#312584); +#312584 = FILL_AREA_STYLE('',(#312585)); +#312585 = FILL_AREA_STYLE_COLOUR('',#279624); +#312586 = CURVE_STYLE('',#312587,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312588 = OVER_RIDING_STYLED_ITEM('overriding color',(#312589),#108610, + #312579); +#312589 = PRESENTATION_STYLE_ASSIGNMENT((#312590,#312595)); +#312590 = SURFACE_STYLE_USAGE(.BOTH.,#312591); +#312591 = SURFACE_SIDE_STYLE('',(#312592)); +#312592 = SURFACE_STYLE_FILL_AREA(#312593); +#312593 = FILL_AREA_STYLE('',(#312594)); +#312594 = FILL_AREA_STYLE_COLOUR('',#280691); +#312595 = CURVE_STYLE('',#312596,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312597 = STYLED_ITEM('color',(#312598),#108620); +#312598 = PRESENTATION_STYLE_ASSIGNMENT((#312599,#312604)); +#312599 = SURFACE_STYLE_USAGE(.BOTH.,#312600); +#312600 = SURFACE_SIDE_STYLE('',(#312601)); +#312601 = SURFACE_STYLE_FILL_AREA(#312602); +#312602 = FILL_AREA_STYLE('',(#312603)); +#312603 = FILL_AREA_STYLE_COLOUR('',#279624); +#312604 = CURVE_STYLE('',#312605,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312606 = OVER_RIDING_STYLED_ITEM('overriding color',(#312607),#108625, + #312597); +#312607 = PRESENTATION_STYLE_ASSIGNMENT((#312608,#312613)); +#312608 = SURFACE_STYLE_USAGE(.BOTH.,#312609); +#312609 = SURFACE_SIDE_STYLE('',(#312610)); +#312610 = SURFACE_STYLE_FILL_AREA(#312611); +#312611 = FILL_AREA_STYLE('',(#312612)); +#312612 = FILL_AREA_STYLE_COLOUR('',#280691); +#312613 = CURVE_STYLE('',#312614,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312615 = STYLED_ITEM('color',(#312616),#108637); +#312616 = PRESENTATION_STYLE_ASSIGNMENT((#312617,#312622)); +#312617 = SURFACE_STYLE_USAGE(.BOTH.,#312618); +#312618 = SURFACE_SIDE_STYLE('',(#312619)); +#312619 = SURFACE_STYLE_FILL_AREA(#312620); +#312620 = FILL_AREA_STYLE('',(#312621)); +#312621 = FILL_AREA_STYLE_COLOUR('',#280691); +#312622 = CURVE_STYLE('',#312623,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312624 = STYLED_ITEM('color',(#312625),#108686); +#312625 = PRESENTATION_STYLE_ASSIGNMENT((#312626,#312631)); +#312626 = SURFACE_STYLE_USAGE(.BOTH.,#312627); +#312627 = SURFACE_SIDE_STYLE('',(#312628)); +#312628 = SURFACE_STYLE_FILL_AREA(#312629); +#312629 = FILL_AREA_STYLE('',(#312630)); +#312630 = FILL_AREA_STYLE_COLOUR('',#280691); +#312631 = CURVE_STYLE('',#312632,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312633 = STYLED_ITEM('color',(#312634),#108710); +#312634 = PRESENTATION_STYLE_ASSIGNMENT((#312635,#312640)); +#312635 = SURFACE_STYLE_USAGE(.BOTH.,#312636); +#312636 = SURFACE_SIDE_STYLE('',(#312637)); +#312637 = SURFACE_STYLE_FILL_AREA(#312638); +#312638 = FILL_AREA_STYLE('',(#312639)); +#312639 = FILL_AREA_STYLE_COLOUR('',#280691); +#312640 = CURVE_STYLE('',#312641,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312642 = STYLED_ITEM('color',(#312643),#108752); +#312643 = PRESENTATION_STYLE_ASSIGNMENT((#312644,#312649)); +#312644 = SURFACE_STYLE_USAGE(.BOTH.,#312645); +#312645 = SURFACE_SIDE_STYLE('',(#312646)); +#312646 = SURFACE_STYLE_FILL_AREA(#312647); +#312647 = FILL_AREA_STYLE('',(#312648)); +#312648 = FILL_AREA_STYLE_COLOUR('',#280691); +#312649 = CURVE_STYLE('',#312650,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312651 = STYLED_ITEM('color',(#312652),#108769); +#312652 = PRESENTATION_STYLE_ASSIGNMENT((#312653,#312658)); +#312653 = SURFACE_STYLE_USAGE(.BOTH.,#312654); +#312654 = SURFACE_SIDE_STYLE('',(#312655)); +#312655 = SURFACE_STYLE_FILL_AREA(#312656); +#312656 = FILL_AREA_STYLE('',(#312657)); +#312657 = FILL_AREA_STYLE_COLOUR('',#279624); +#312658 = CURVE_STYLE('',#312659,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312660 = OVER_RIDING_STYLED_ITEM('overriding color',(#312661),#108776, + #312651); +#312661 = PRESENTATION_STYLE_ASSIGNMENT((#312662,#312667)); +#312662 = SURFACE_STYLE_USAGE(.BOTH.,#312663); +#312663 = SURFACE_SIDE_STYLE('',(#312664)); +#312664 = SURFACE_STYLE_FILL_AREA(#312665); +#312665 = FILL_AREA_STYLE('',(#312666)); +#312666 = FILL_AREA_STYLE_COLOUR('',#280691); +#312667 = CURVE_STYLE('',#312668,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312669 = STYLED_ITEM('color',(#312670),#108786); +#312670 = PRESENTATION_STYLE_ASSIGNMENT((#312671,#312676)); +#312671 = SURFACE_STYLE_USAGE(.BOTH.,#312672); +#312672 = SURFACE_SIDE_STYLE('',(#312673)); +#312673 = SURFACE_STYLE_FILL_AREA(#312674); +#312674 = FILL_AREA_STYLE('',(#312675)); +#312675 = FILL_AREA_STYLE_COLOUR('',#279624); +#312676 = CURVE_STYLE('',#312677,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312678 = OVER_RIDING_STYLED_ITEM('overriding color',(#312679),#108791, + #312669); +#312679 = PRESENTATION_STYLE_ASSIGNMENT((#312680,#312685)); +#312680 = SURFACE_STYLE_USAGE(.BOTH.,#312681); +#312681 = SURFACE_SIDE_STYLE('',(#312682)); +#312682 = SURFACE_STYLE_FILL_AREA(#312683); +#312683 = FILL_AREA_STYLE('',(#312684)); +#312684 = FILL_AREA_STYLE_COLOUR('',#280691); +#312685 = CURVE_STYLE('',#312686,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312687 = STYLED_ITEM('color',(#312688),#108803); +#312688 = PRESENTATION_STYLE_ASSIGNMENT((#312689,#312694)); +#312689 = SURFACE_STYLE_USAGE(.BOTH.,#312690); +#312690 = SURFACE_SIDE_STYLE('',(#312691)); +#312691 = SURFACE_STYLE_FILL_AREA(#312692); +#312692 = FILL_AREA_STYLE('',(#312693)); +#312693 = FILL_AREA_STYLE_COLOUR('',#280691); +#312694 = CURVE_STYLE('',#312695,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312696 = STYLED_ITEM('color',(#312697),#108852); +#312697 = PRESENTATION_STYLE_ASSIGNMENT((#312698,#312703)); +#312698 = SURFACE_STYLE_USAGE(.BOTH.,#312699); +#312699 = SURFACE_SIDE_STYLE('',(#312700)); +#312700 = SURFACE_STYLE_FILL_AREA(#312701); +#312701 = FILL_AREA_STYLE('',(#312702)); +#312702 = FILL_AREA_STYLE_COLOUR('',#280691); +#312703 = CURVE_STYLE('',#312704,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312705 = STYLED_ITEM('color',(#312706),#108876); +#312706 = PRESENTATION_STYLE_ASSIGNMENT((#312707,#312712)); +#312707 = SURFACE_STYLE_USAGE(.BOTH.,#312708); +#312708 = SURFACE_SIDE_STYLE('',(#312709)); +#312709 = SURFACE_STYLE_FILL_AREA(#312710); +#312710 = FILL_AREA_STYLE('',(#312711)); +#312711 = FILL_AREA_STYLE_COLOUR('',#280691); +#312712 = CURVE_STYLE('',#312713,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312714 = STYLED_ITEM('color',(#312715),#108918); +#312715 = PRESENTATION_STYLE_ASSIGNMENT((#312716,#312721)); +#312716 = SURFACE_STYLE_USAGE(.BOTH.,#312717); +#312717 = SURFACE_SIDE_STYLE('',(#312718)); +#312718 = SURFACE_STYLE_FILL_AREA(#312719); +#312719 = FILL_AREA_STYLE('',(#312720)); +#312720 = FILL_AREA_STYLE_COLOUR('',#280691); +#312721 = CURVE_STYLE('',#312722,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312723 = STYLED_ITEM('color',(#312724),#108935); +#312724 = PRESENTATION_STYLE_ASSIGNMENT((#312725,#312730)); +#312725 = SURFACE_STYLE_USAGE(.BOTH.,#312726); +#312726 = SURFACE_SIDE_STYLE('',(#312727)); +#312727 = SURFACE_STYLE_FILL_AREA(#312728); +#312728 = FILL_AREA_STYLE('',(#312729)); +#312729 = FILL_AREA_STYLE_COLOUR('',#279624); +#312730 = CURVE_STYLE('',#312731,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312732 = OVER_RIDING_STYLED_ITEM('overriding color',(#312733),#108942, + #312723); +#312733 = PRESENTATION_STYLE_ASSIGNMENT((#312734,#312739)); +#312734 = SURFACE_STYLE_USAGE(.BOTH.,#312735); +#312735 = SURFACE_SIDE_STYLE('',(#312736)); +#312736 = SURFACE_STYLE_FILL_AREA(#312737); +#312737 = FILL_AREA_STYLE('',(#312738)); +#312738 = FILL_AREA_STYLE_COLOUR('',#280691); +#312739 = CURVE_STYLE('',#312740,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312741 = STYLED_ITEM('color',(#312742),#108952); +#312742 = PRESENTATION_STYLE_ASSIGNMENT((#312743,#312748)); +#312743 = SURFACE_STYLE_USAGE(.BOTH.,#312744); +#312744 = SURFACE_SIDE_STYLE('',(#312745)); +#312745 = SURFACE_STYLE_FILL_AREA(#312746); +#312746 = FILL_AREA_STYLE('',(#312747)); +#312747 = FILL_AREA_STYLE_COLOUR('',#279624); +#312748 = CURVE_STYLE('',#312749,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312750 = OVER_RIDING_STYLED_ITEM('overriding color',(#312751),#108957, + #312741); +#312751 = PRESENTATION_STYLE_ASSIGNMENT((#312752,#312757)); +#312752 = SURFACE_STYLE_USAGE(.BOTH.,#312753); +#312753 = SURFACE_SIDE_STYLE('',(#312754)); +#312754 = SURFACE_STYLE_FILL_AREA(#312755); +#312755 = FILL_AREA_STYLE('',(#312756)); +#312756 = FILL_AREA_STYLE_COLOUR('',#280691); +#312757 = CURVE_STYLE('',#312758,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312759 = STYLED_ITEM('color',(#312760),#108969); +#312760 = PRESENTATION_STYLE_ASSIGNMENT((#312761,#312766)); +#312761 = SURFACE_STYLE_USAGE(.BOTH.,#312762); +#312762 = SURFACE_SIDE_STYLE('',(#312763)); +#312763 = SURFACE_STYLE_FILL_AREA(#312764); +#312764 = FILL_AREA_STYLE('',(#312765)); +#312765 = FILL_AREA_STYLE_COLOUR('',#280691); +#312766 = CURVE_STYLE('',#312767,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312768 = STYLED_ITEM('color',(#312769),#109018); +#312769 = PRESENTATION_STYLE_ASSIGNMENT((#312770,#312775)); +#312770 = SURFACE_STYLE_USAGE(.BOTH.,#312771); +#312771 = SURFACE_SIDE_STYLE('',(#312772)); +#312772 = SURFACE_STYLE_FILL_AREA(#312773); +#312773 = FILL_AREA_STYLE('',(#312774)); +#312774 = FILL_AREA_STYLE_COLOUR('',#280691); +#312775 = CURVE_STYLE('',#312776,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312777 = STYLED_ITEM('color',(#312778),#109042); +#312778 = PRESENTATION_STYLE_ASSIGNMENT((#312779,#312784)); +#312779 = SURFACE_STYLE_USAGE(.BOTH.,#312780); +#312780 = SURFACE_SIDE_STYLE('',(#312781)); +#312781 = SURFACE_STYLE_FILL_AREA(#312782); +#312782 = FILL_AREA_STYLE('',(#312783)); +#312783 = FILL_AREA_STYLE_COLOUR('',#280691); +#312784 = CURVE_STYLE('',#312785,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312786 = STYLED_ITEM('color',(#312787),#109084); +#312787 = PRESENTATION_STYLE_ASSIGNMENT((#312788,#312793)); +#312788 = SURFACE_STYLE_USAGE(.BOTH.,#312789); +#312789 = SURFACE_SIDE_STYLE('',(#312790)); +#312790 = SURFACE_STYLE_FILL_AREA(#312791); +#312791 = FILL_AREA_STYLE('',(#312792)); +#312792 = FILL_AREA_STYLE_COLOUR('',#280691); +#312793 = CURVE_STYLE('',#312794,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312795 = STYLED_ITEM('color',(#312796),#109101); +#312796 = PRESENTATION_STYLE_ASSIGNMENT((#312797,#312802)); +#312797 = SURFACE_STYLE_USAGE(.BOTH.,#312798); +#312798 = SURFACE_SIDE_STYLE('',(#312799)); +#312799 = SURFACE_STYLE_FILL_AREA(#312800); +#312800 = FILL_AREA_STYLE('',(#312801)); +#312801 = FILL_AREA_STYLE_COLOUR('',#279624); +#312802 = CURVE_STYLE('',#312803,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312804 = OVER_RIDING_STYLED_ITEM('overriding color',(#312805),#109108, + #312795); +#312805 = PRESENTATION_STYLE_ASSIGNMENT((#312806,#312811)); +#312806 = SURFACE_STYLE_USAGE(.BOTH.,#312807); +#312807 = SURFACE_SIDE_STYLE('',(#312808)); +#312808 = SURFACE_STYLE_FILL_AREA(#312809); +#312809 = FILL_AREA_STYLE('',(#312810)); +#312810 = FILL_AREA_STYLE_COLOUR('',#280691); +#312811 = CURVE_STYLE('',#312812,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312813 = STYLED_ITEM('color',(#312814),#109118); +#312814 = PRESENTATION_STYLE_ASSIGNMENT((#312815,#312820)); +#312815 = SURFACE_STYLE_USAGE(.BOTH.,#312816); +#312816 = SURFACE_SIDE_STYLE('',(#312817)); +#312817 = SURFACE_STYLE_FILL_AREA(#312818); +#312818 = FILL_AREA_STYLE('',(#312819)); +#312819 = FILL_AREA_STYLE_COLOUR('',#279624); +#312820 = CURVE_STYLE('',#312821,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312822 = OVER_RIDING_STYLED_ITEM('overriding color',(#312823),#109123, + #312813); +#312823 = PRESENTATION_STYLE_ASSIGNMENT((#312824,#312829)); +#312824 = SURFACE_STYLE_USAGE(.BOTH.,#312825); +#312825 = SURFACE_SIDE_STYLE('',(#312826)); +#312826 = SURFACE_STYLE_FILL_AREA(#312827); +#312827 = FILL_AREA_STYLE('',(#312828)); +#312828 = FILL_AREA_STYLE_COLOUR('',#280691); +#312829 = CURVE_STYLE('',#312830,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312831 = STYLED_ITEM('color',(#312832),#109135); +#312832 = PRESENTATION_STYLE_ASSIGNMENT((#312833,#312838)); +#312833 = SURFACE_STYLE_USAGE(.BOTH.,#312834); +#312834 = SURFACE_SIDE_STYLE('',(#312835)); +#312835 = SURFACE_STYLE_FILL_AREA(#312836); +#312836 = FILL_AREA_STYLE('',(#312837)); +#312837 = FILL_AREA_STYLE_COLOUR('',#280691); +#312838 = CURVE_STYLE('',#312839,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312840 = STYLED_ITEM('color',(#312841),#109184); +#312841 = PRESENTATION_STYLE_ASSIGNMENT((#312842,#312847)); +#312842 = SURFACE_STYLE_USAGE(.BOTH.,#312843); +#312843 = SURFACE_SIDE_STYLE('',(#312844)); +#312844 = SURFACE_STYLE_FILL_AREA(#312845); +#312845 = FILL_AREA_STYLE('',(#312846)); +#312846 = FILL_AREA_STYLE_COLOUR('',#280691); +#312847 = CURVE_STYLE('',#312848,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312849 = STYLED_ITEM('color',(#312850),#109208); +#312850 = PRESENTATION_STYLE_ASSIGNMENT((#312851,#312856)); +#312851 = SURFACE_STYLE_USAGE(.BOTH.,#312852); +#312852 = SURFACE_SIDE_STYLE('',(#312853)); +#312853 = SURFACE_STYLE_FILL_AREA(#312854); +#312854 = FILL_AREA_STYLE('',(#312855)); +#312855 = FILL_AREA_STYLE_COLOUR('',#280691); +#312856 = CURVE_STYLE('',#312857,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312858 = STYLED_ITEM('color',(#312859),#109250); +#312859 = PRESENTATION_STYLE_ASSIGNMENT((#312860,#312865)); +#312860 = SURFACE_STYLE_USAGE(.BOTH.,#312861); +#312861 = SURFACE_SIDE_STYLE('',(#312862)); +#312862 = SURFACE_STYLE_FILL_AREA(#312863); +#312863 = FILL_AREA_STYLE('',(#312864)); +#312864 = FILL_AREA_STYLE_COLOUR('',#280691); +#312865 = CURVE_STYLE('',#312866,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312867 = STYLED_ITEM('color',(#312868),#109267); +#312868 = PRESENTATION_STYLE_ASSIGNMENT((#312869,#312874)); +#312869 = SURFACE_STYLE_USAGE(.BOTH.,#312870); +#312870 = SURFACE_SIDE_STYLE('',(#312871)); +#312871 = SURFACE_STYLE_FILL_AREA(#312872); +#312872 = FILL_AREA_STYLE('',(#312873)); +#312873 = FILL_AREA_STYLE_COLOUR('',#279624); +#312874 = CURVE_STYLE('',#312875,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312876 = OVER_RIDING_STYLED_ITEM('overriding color',(#312877),#109274, + #312867); +#312877 = PRESENTATION_STYLE_ASSIGNMENT((#312878,#312883)); +#312878 = SURFACE_STYLE_USAGE(.BOTH.,#312879); +#312879 = SURFACE_SIDE_STYLE('',(#312880)); +#312880 = SURFACE_STYLE_FILL_AREA(#312881); +#312881 = FILL_AREA_STYLE('',(#312882)); +#312882 = FILL_AREA_STYLE_COLOUR('',#280691); +#312883 = CURVE_STYLE('',#312884,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312885 = STYLED_ITEM('color',(#312886),#109284); +#312886 = PRESENTATION_STYLE_ASSIGNMENT((#312887,#312892)); +#312887 = SURFACE_STYLE_USAGE(.BOTH.,#312888); +#312888 = SURFACE_SIDE_STYLE('',(#312889)); +#312889 = SURFACE_STYLE_FILL_AREA(#312890); +#312890 = FILL_AREA_STYLE('',(#312891)); +#312891 = FILL_AREA_STYLE_COLOUR('',#279624); +#312892 = CURVE_STYLE('',#312893,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312894 = OVER_RIDING_STYLED_ITEM('overriding color',(#312895),#109289, + #312885); +#312895 = PRESENTATION_STYLE_ASSIGNMENT((#312896,#312901)); +#312896 = SURFACE_STYLE_USAGE(.BOTH.,#312897); +#312897 = SURFACE_SIDE_STYLE('',(#312898)); +#312898 = SURFACE_STYLE_FILL_AREA(#312899); +#312899 = FILL_AREA_STYLE('',(#312900)); +#312900 = FILL_AREA_STYLE_COLOUR('',#280691); +#312901 = CURVE_STYLE('',#312902,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312903 = STYLED_ITEM('color',(#312904),#109301); +#312904 = PRESENTATION_STYLE_ASSIGNMENT((#312905,#312910)); +#312905 = SURFACE_STYLE_USAGE(.BOTH.,#312906); +#312906 = SURFACE_SIDE_STYLE('',(#312907)); +#312907 = SURFACE_STYLE_FILL_AREA(#312908); +#312908 = FILL_AREA_STYLE('',(#312909)); +#312909 = FILL_AREA_STYLE_COLOUR('',#280691); +#312910 = CURVE_STYLE('',#312911,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312912 = STYLED_ITEM('color',(#312913),#109350); +#312913 = PRESENTATION_STYLE_ASSIGNMENT((#312914,#312919)); +#312914 = SURFACE_STYLE_USAGE(.BOTH.,#312915); +#312915 = SURFACE_SIDE_STYLE('',(#312916)); +#312916 = SURFACE_STYLE_FILL_AREA(#312917); +#312917 = FILL_AREA_STYLE('',(#312918)); +#312918 = FILL_AREA_STYLE_COLOUR('',#280691); +#312919 = CURVE_STYLE('',#312920,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312921 = STYLED_ITEM('color',(#312922),#109374); +#312922 = PRESENTATION_STYLE_ASSIGNMENT((#312923,#312928)); +#312923 = SURFACE_STYLE_USAGE(.BOTH.,#312924); +#312924 = SURFACE_SIDE_STYLE('',(#312925)); +#312925 = SURFACE_STYLE_FILL_AREA(#312926); +#312926 = FILL_AREA_STYLE('',(#312927)); +#312927 = FILL_AREA_STYLE_COLOUR('',#280691); +#312928 = CURVE_STYLE('',#312929,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312930 = STYLED_ITEM('color',(#312931),#109416); +#312931 = PRESENTATION_STYLE_ASSIGNMENT((#312932,#312937)); +#312932 = SURFACE_STYLE_USAGE(.BOTH.,#312933); +#312933 = SURFACE_SIDE_STYLE('',(#312934)); +#312934 = SURFACE_STYLE_FILL_AREA(#312935); +#312935 = FILL_AREA_STYLE('',(#312936)); +#312936 = FILL_AREA_STYLE_COLOUR('',#280691); +#312937 = CURVE_STYLE('',#312938,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312939 = STYLED_ITEM('color',(#312940),#109433); +#312940 = PRESENTATION_STYLE_ASSIGNMENT((#312941,#312946)); +#312941 = SURFACE_STYLE_USAGE(.BOTH.,#312942); +#312942 = SURFACE_SIDE_STYLE('',(#312943)); +#312943 = SURFACE_STYLE_FILL_AREA(#312944); +#312944 = FILL_AREA_STYLE('',(#312945)); +#312945 = FILL_AREA_STYLE_COLOUR('',#279624); +#312946 = CURVE_STYLE('',#312947,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312948 = OVER_RIDING_STYLED_ITEM('overriding color',(#312949),#109440, + #312939); +#312949 = PRESENTATION_STYLE_ASSIGNMENT((#312950,#312955)); +#312950 = SURFACE_STYLE_USAGE(.BOTH.,#312951); +#312951 = SURFACE_SIDE_STYLE('',(#312952)); +#312952 = SURFACE_STYLE_FILL_AREA(#312953); +#312953 = FILL_AREA_STYLE('',(#312954)); +#312954 = FILL_AREA_STYLE_COLOUR('',#280691); +#312955 = CURVE_STYLE('',#312956,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312957 = STYLED_ITEM('color',(#312958),#109450); +#312958 = PRESENTATION_STYLE_ASSIGNMENT((#312959,#312964)); +#312959 = SURFACE_STYLE_USAGE(.BOTH.,#312960); +#312960 = SURFACE_SIDE_STYLE('',(#312961)); +#312961 = SURFACE_STYLE_FILL_AREA(#312962); +#312962 = FILL_AREA_STYLE('',(#312963)); +#312963 = FILL_AREA_STYLE_COLOUR('',#279624); +#312964 = CURVE_STYLE('',#312965,POSITIVE_LENGTH_MEASURE(0.1),#279624); +#312965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312966 = OVER_RIDING_STYLED_ITEM('overriding color',(#312967),#109455, + #312957); +#312967 = PRESENTATION_STYLE_ASSIGNMENT((#312968,#312973)); +#312968 = SURFACE_STYLE_USAGE(.BOTH.,#312969); +#312969 = SURFACE_SIDE_STYLE('',(#312970)); +#312970 = SURFACE_STYLE_FILL_AREA(#312971); +#312971 = FILL_AREA_STYLE('',(#312972)); +#312972 = FILL_AREA_STYLE_COLOUR('',#280691); +#312973 = CURVE_STYLE('',#312974,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312975 = STYLED_ITEM('color',(#312976),#109467); +#312976 = PRESENTATION_STYLE_ASSIGNMENT((#312977,#312982)); +#312977 = SURFACE_STYLE_USAGE(.BOTH.,#312978); +#312978 = SURFACE_SIDE_STYLE('',(#312979)); +#312979 = SURFACE_STYLE_FILL_AREA(#312980); +#312980 = FILL_AREA_STYLE('',(#312981)); +#312981 = FILL_AREA_STYLE_COLOUR('',#280691); +#312982 = CURVE_STYLE('',#312983,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312984 = STYLED_ITEM('color',(#312985),#109516); +#312985 = PRESENTATION_STYLE_ASSIGNMENT((#312986,#312991)); +#312986 = SURFACE_STYLE_USAGE(.BOTH.,#312987); +#312987 = SURFACE_SIDE_STYLE('',(#312988)); +#312988 = SURFACE_STYLE_FILL_AREA(#312989); +#312989 = FILL_AREA_STYLE('',(#312990)); +#312990 = FILL_AREA_STYLE_COLOUR('',#280691); +#312991 = CURVE_STYLE('',#312992,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#312992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312993 = STYLED_ITEM('color',(#312994),#109540); +#312994 = PRESENTATION_STYLE_ASSIGNMENT((#312995,#313000)); +#312995 = SURFACE_STYLE_USAGE(.BOTH.,#312996); +#312996 = SURFACE_SIDE_STYLE('',(#312997)); +#312997 = SURFACE_STYLE_FILL_AREA(#312998); +#312998 = FILL_AREA_STYLE('',(#312999)); +#312999 = FILL_AREA_STYLE_COLOUR('',#280691); +#313000 = CURVE_STYLE('',#313001,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313002 = STYLED_ITEM('color',(#313003),#109582); +#313003 = PRESENTATION_STYLE_ASSIGNMENT((#313004,#313009)); +#313004 = SURFACE_STYLE_USAGE(.BOTH.,#313005); +#313005 = SURFACE_SIDE_STYLE('',(#313006)); +#313006 = SURFACE_STYLE_FILL_AREA(#313007); +#313007 = FILL_AREA_STYLE('',(#313008)); +#313008 = FILL_AREA_STYLE_COLOUR('',#280691); +#313009 = CURVE_STYLE('',#313010,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313011 = STYLED_ITEM('color',(#313012),#109599); +#313012 = PRESENTATION_STYLE_ASSIGNMENT((#313013,#313018)); +#313013 = SURFACE_STYLE_USAGE(.BOTH.,#313014); +#313014 = SURFACE_SIDE_STYLE('',(#313015)); +#313015 = SURFACE_STYLE_FILL_AREA(#313016); +#313016 = FILL_AREA_STYLE('',(#313017)); +#313017 = FILL_AREA_STYLE_COLOUR('',#280691); +#313018 = CURVE_STYLE('',#313019,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313020 = STYLED_ITEM('color',(#313021),#109616); +#313021 = PRESENTATION_STYLE_ASSIGNMENT((#313022,#313027)); +#313022 = SURFACE_STYLE_USAGE(.BOTH.,#313023); +#313023 = SURFACE_SIDE_STYLE('',(#313024)); +#313024 = SURFACE_STYLE_FILL_AREA(#313025); +#313025 = FILL_AREA_STYLE('',(#313026)); +#313026 = FILL_AREA_STYLE_COLOUR('',#280691); +#313027 = CURVE_STYLE('',#313028,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313029 = STYLED_ITEM('color',(#313030),#109633); +#313030 = PRESENTATION_STYLE_ASSIGNMENT((#313031,#313036)); +#313031 = SURFACE_STYLE_USAGE(.BOTH.,#313032); +#313032 = SURFACE_SIDE_STYLE('',(#313033)); +#313033 = SURFACE_STYLE_FILL_AREA(#313034); +#313034 = FILL_AREA_STYLE('',(#313035)); +#313035 = FILL_AREA_STYLE_COLOUR('',#280691); +#313036 = CURVE_STYLE('',#313037,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313038 = STYLED_ITEM('color',(#313039),#109645); +#313039 = PRESENTATION_STYLE_ASSIGNMENT((#313040,#313045)); +#313040 = SURFACE_STYLE_USAGE(.BOTH.,#313041); +#313041 = SURFACE_SIDE_STYLE('',(#313042)); +#313042 = SURFACE_STYLE_FILL_AREA(#313043); +#313043 = FILL_AREA_STYLE('',(#313044)); +#313044 = FILL_AREA_STYLE_COLOUR('',#280691); +#313045 = CURVE_STYLE('',#313046,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313047 = STYLED_ITEM('color',(#313048),#109662); +#313048 = PRESENTATION_STYLE_ASSIGNMENT((#313049,#313054)); +#313049 = SURFACE_STYLE_USAGE(.BOTH.,#313050); +#313050 = SURFACE_SIDE_STYLE('',(#313051)); +#313051 = SURFACE_STYLE_FILL_AREA(#313052); +#313052 = FILL_AREA_STYLE('',(#313053)); +#313053 = FILL_AREA_STYLE_COLOUR('',#280691); +#313054 = CURVE_STYLE('',#313055,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313056 = STYLED_ITEM('color',(#313057),#109679); +#313057 = PRESENTATION_STYLE_ASSIGNMENT((#313058,#313063)); +#313058 = SURFACE_STYLE_USAGE(.BOTH.,#313059); +#313059 = SURFACE_SIDE_STYLE('',(#313060)); +#313060 = SURFACE_STYLE_FILL_AREA(#313061); +#313061 = FILL_AREA_STYLE('',(#313062)); +#313062 = FILL_AREA_STYLE_COLOUR('',#280691); +#313063 = CURVE_STYLE('',#313064,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313065 = STYLED_ITEM('color',(#313066),#109691); +#313066 = PRESENTATION_STYLE_ASSIGNMENT((#313067,#313072)); +#313067 = SURFACE_STYLE_USAGE(.BOTH.,#313068); +#313068 = SURFACE_SIDE_STYLE('',(#313069)); +#313069 = SURFACE_STYLE_FILL_AREA(#313070); +#313070 = FILL_AREA_STYLE('',(#313071)); +#313071 = FILL_AREA_STYLE_COLOUR('',#280691); +#313072 = CURVE_STYLE('',#313073,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313074 = STYLED_ITEM('color',(#313075),#109708); +#313075 = PRESENTATION_STYLE_ASSIGNMENT((#313076,#313081)); +#313076 = SURFACE_STYLE_USAGE(.BOTH.,#313077); +#313077 = SURFACE_SIDE_STYLE('',(#313078)); +#313078 = SURFACE_STYLE_FILL_AREA(#313079); +#313079 = FILL_AREA_STYLE('',(#313080)); +#313080 = FILL_AREA_STYLE_COLOUR('',#280691); +#313081 = CURVE_STYLE('',#313082,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313083 = STYLED_ITEM('color',(#313084),#109725); +#313084 = PRESENTATION_STYLE_ASSIGNMENT((#313085,#313090)); +#313085 = SURFACE_STYLE_USAGE(.BOTH.,#313086); +#313086 = SURFACE_SIDE_STYLE('',(#313087)); +#313087 = SURFACE_STYLE_FILL_AREA(#313088); +#313088 = FILL_AREA_STYLE('',(#313089)); +#313089 = FILL_AREA_STYLE_COLOUR('',#280691); +#313090 = CURVE_STYLE('',#313091,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313092 = STYLED_ITEM('color',(#313093),#109737); +#313093 = PRESENTATION_STYLE_ASSIGNMENT((#313094,#313099)); +#313094 = SURFACE_STYLE_USAGE(.BOTH.,#313095); +#313095 = SURFACE_SIDE_STYLE('',(#313096)); +#313096 = SURFACE_STYLE_FILL_AREA(#313097); +#313097 = FILL_AREA_STYLE('',(#313098)); +#313098 = FILL_AREA_STYLE_COLOUR('',#280691); +#313099 = CURVE_STYLE('',#313100,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313101 = STYLED_ITEM('color',(#313102),#109754); +#313102 = PRESENTATION_STYLE_ASSIGNMENT((#313103,#313108)); +#313103 = SURFACE_STYLE_USAGE(.BOTH.,#313104); +#313104 = SURFACE_SIDE_STYLE('',(#313105)); +#313105 = SURFACE_STYLE_FILL_AREA(#313106); +#313106 = FILL_AREA_STYLE('',(#313107)); +#313107 = FILL_AREA_STYLE_COLOUR('',#280691); +#313108 = CURVE_STYLE('',#313109,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313110 = STYLED_ITEM('color',(#313111),#109771); +#313111 = PRESENTATION_STYLE_ASSIGNMENT((#313112,#313117)); +#313112 = SURFACE_STYLE_USAGE(.BOTH.,#313113); +#313113 = SURFACE_SIDE_STYLE('',(#313114)); +#313114 = SURFACE_STYLE_FILL_AREA(#313115); +#313115 = FILL_AREA_STYLE('',(#313116)); +#313116 = FILL_AREA_STYLE_COLOUR('',#280691); +#313117 = CURVE_STYLE('',#313118,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313119 = STYLED_ITEM('color',(#313120),#109783); +#313120 = PRESENTATION_STYLE_ASSIGNMENT((#313121,#313126)); +#313121 = SURFACE_STYLE_USAGE(.BOTH.,#313122); +#313122 = SURFACE_SIDE_STYLE('',(#313123)); +#313123 = SURFACE_STYLE_FILL_AREA(#313124); +#313124 = FILL_AREA_STYLE('',(#313125)); +#313125 = FILL_AREA_STYLE_COLOUR('',#280691); +#313126 = CURVE_STYLE('',#313127,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313128 = STYLED_ITEM('color',(#313129),#109800); +#313129 = PRESENTATION_STYLE_ASSIGNMENT((#313130,#313135)); +#313130 = SURFACE_STYLE_USAGE(.BOTH.,#313131); +#313131 = SURFACE_SIDE_STYLE('',(#313132)); +#313132 = SURFACE_STYLE_FILL_AREA(#313133); +#313133 = FILL_AREA_STYLE('',(#313134)); +#313134 = FILL_AREA_STYLE_COLOUR('',#280691); +#313135 = CURVE_STYLE('',#313136,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313137 = STYLED_ITEM('color',(#313138),#109817); +#313138 = PRESENTATION_STYLE_ASSIGNMENT((#313139,#313144)); +#313139 = SURFACE_STYLE_USAGE(.BOTH.,#313140); +#313140 = SURFACE_SIDE_STYLE('',(#313141)); +#313141 = SURFACE_STYLE_FILL_AREA(#313142); +#313142 = FILL_AREA_STYLE('',(#313143)); +#313143 = FILL_AREA_STYLE_COLOUR('',#280691); +#313144 = CURVE_STYLE('',#313145,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313146 = STYLED_ITEM('color',(#313147),#109829); +#313147 = PRESENTATION_STYLE_ASSIGNMENT((#313148,#313153)); +#313148 = SURFACE_STYLE_USAGE(.BOTH.,#313149); +#313149 = SURFACE_SIDE_STYLE('',(#313150)); +#313150 = SURFACE_STYLE_FILL_AREA(#313151); +#313151 = FILL_AREA_STYLE('',(#313152)); +#313152 = FILL_AREA_STYLE_COLOUR('',#280691); +#313153 = CURVE_STYLE('',#313154,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313155 = STYLED_ITEM('color',(#313156),#109846); +#313156 = PRESENTATION_STYLE_ASSIGNMENT((#313157,#313162)); +#313157 = SURFACE_STYLE_USAGE(.BOTH.,#313158); +#313158 = SURFACE_SIDE_STYLE('',(#313159)); +#313159 = SURFACE_STYLE_FILL_AREA(#313160); +#313160 = FILL_AREA_STYLE('',(#313161)); +#313161 = FILL_AREA_STYLE_COLOUR('',#280691); +#313162 = CURVE_STYLE('',#313163,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313164 = STYLED_ITEM('color',(#313165),#109863); +#313165 = PRESENTATION_STYLE_ASSIGNMENT((#313166,#313171)); +#313166 = SURFACE_STYLE_USAGE(.BOTH.,#313167); +#313167 = SURFACE_SIDE_STYLE('',(#313168)); +#313168 = SURFACE_STYLE_FILL_AREA(#313169); +#313169 = FILL_AREA_STYLE('',(#313170)); +#313170 = FILL_AREA_STYLE_COLOUR('',#280691); +#313171 = CURVE_STYLE('',#313172,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313173 = STYLED_ITEM('color',(#313174),#109875); +#313174 = PRESENTATION_STYLE_ASSIGNMENT((#313175,#313180)); +#313175 = SURFACE_STYLE_USAGE(.BOTH.,#313176); +#313176 = SURFACE_SIDE_STYLE('',(#313177)); +#313177 = SURFACE_STYLE_FILL_AREA(#313178); +#313178 = FILL_AREA_STYLE('',(#313179)); +#313179 = FILL_AREA_STYLE_COLOUR('',#280691); +#313180 = CURVE_STYLE('',#313181,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313182 = STYLED_ITEM('color',(#313183),#109892); +#313183 = PRESENTATION_STYLE_ASSIGNMENT((#313184,#313189)); +#313184 = SURFACE_STYLE_USAGE(.BOTH.,#313185); +#313185 = SURFACE_SIDE_STYLE('',(#313186)); +#313186 = SURFACE_STYLE_FILL_AREA(#313187); +#313187 = FILL_AREA_STYLE('',(#313188)); +#313188 = FILL_AREA_STYLE_COLOUR('',#280691); +#313189 = CURVE_STYLE('',#313190,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313191 = STYLED_ITEM('color',(#313192),#109909); +#313192 = PRESENTATION_STYLE_ASSIGNMENT((#313193,#313198)); +#313193 = SURFACE_STYLE_USAGE(.BOTH.,#313194); +#313194 = SURFACE_SIDE_STYLE('',(#313195)); +#313195 = SURFACE_STYLE_FILL_AREA(#313196); +#313196 = FILL_AREA_STYLE('',(#313197)); +#313197 = FILL_AREA_STYLE_COLOUR('',#280691); +#313198 = CURVE_STYLE('',#313199,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313200 = STYLED_ITEM('color',(#313201),#109921); +#313201 = PRESENTATION_STYLE_ASSIGNMENT((#313202,#313207)); +#313202 = SURFACE_STYLE_USAGE(.BOTH.,#313203); +#313203 = SURFACE_SIDE_STYLE('',(#313204)); +#313204 = SURFACE_STYLE_FILL_AREA(#313205); +#313205 = FILL_AREA_STYLE('',(#313206)); +#313206 = FILL_AREA_STYLE_COLOUR('',#280691); +#313207 = CURVE_STYLE('',#313208,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313209 = STYLED_ITEM('color',(#313210),#109938); +#313210 = PRESENTATION_STYLE_ASSIGNMENT((#313211,#313216)); +#313211 = SURFACE_STYLE_USAGE(.BOTH.,#313212); +#313212 = SURFACE_SIDE_STYLE('',(#313213)); +#313213 = SURFACE_STYLE_FILL_AREA(#313214); +#313214 = FILL_AREA_STYLE('',(#313215)); +#313215 = FILL_AREA_STYLE_COLOUR('',#280691); +#313216 = CURVE_STYLE('',#313217,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313218 = STYLED_ITEM('color',(#313219),#109955); +#313219 = PRESENTATION_STYLE_ASSIGNMENT((#313220,#313225)); +#313220 = SURFACE_STYLE_USAGE(.BOTH.,#313221); +#313221 = SURFACE_SIDE_STYLE('',(#313222)); +#313222 = SURFACE_STYLE_FILL_AREA(#313223); +#313223 = FILL_AREA_STYLE('',(#313224)); +#313224 = FILL_AREA_STYLE_COLOUR('',#280691); +#313225 = CURVE_STYLE('',#313226,POSITIVE_LENGTH_MEASURE(0.1),#280691); +#313226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313227 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #313228,#313237,#313245,#313252,#313259,#313266,#313273,#313280, + #313287,#313294,#313301,#313308,#313315,#313322,#313329,#313336, + #313343,#313350,#313357,#313364,#313371,#313378,#313385,#313392, + #313399,#313406,#313413,#313420,#313427,#313434,#313441,#313448, + #313455,#313462,#313469,#313476,#313483,#313490,#313497,#313504, + #313511,#313518,#313525,#313532,#313539,#313546,#313553,#313560, + #313567,#313574,#313581,#313588,#313595,#313602,#313609,#313616, + #313625,#313632,#313639,#313646,#313653,#313660,#313667,#313674, + #313681,#313688,#313695,#313702,#313709,#313716,#313723,#313730, + #313737,#313744,#313751,#313758,#313765,#313772,#313779,#313786, + #313793,#313800,#313807,#313814,#313821,#313828,#313835,#313842, + #313849,#313856,#313863,#313870,#313877,#313884,#313891,#313898, + #313905,#313912,#313919,#313926,#313933,#313940,#313947,#313954, + #313961,#313968,#313975,#313982,#313989,#313996,#314003,#314010, + #314017,#314024,#314031,#314038,#314045,#314052,#314059,#314066, + #314073,#314080,#314087,#314094,#314101,#314108,#314115,#314122, + #314129,#314136,#314143,#314150,#314157,#314164,#314171,#314178, + #314185,#314192,#314199,#314206,#314213,#314220,#314227,#314234, + #314241,#314248,#314255,#314262,#314269,#314276,#314283,#314290, + #314297,#314304,#314311,#314318,#314325,#314332,#314339,#314346, + #314353,#314360,#314367,#314374,#314381,#314388,#314395,#314402, + #314409,#314416,#314423,#314430,#314437,#314444,#314451,#314458, + #314465,#314472,#314479,#314486,#314493,#314500,#314507,#314514, + #314521,#314528,#314535,#314542,#314549,#314556,#314563,#314570, + #314579,#314586,#314593,#314600,#314607,#314614,#314621,#314628, + #314635,#314642,#314649,#314656,#314663,#314672,#314679,#314686, + #314693,#314700,#314707,#314714,#314721,#314728,#314735,#314742, + #314749,#314756,#314763,#314770,#314777,#314784,#314791,#314798, + #314807,#314814,#314821,#314828,#314835,#314842,#314849,#314856, + #314863,#314870,#314877,#314884),#65610); +#313228 = STYLED_ITEM('color',(#313229),#58710); +#313229 = PRESENTATION_STYLE_ASSIGNMENT((#313230,#313235)); +#313230 = SURFACE_STYLE_USAGE(.BOTH.,#313231); +#313231 = SURFACE_SIDE_STYLE('',(#313232)); +#313232 = SURFACE_STYLE_FILL_AREA(#313233); +#313233 = FILL_AREA_STYLE('',(#313234)); +#313234 = FILL_AREA_STYLE_COLOUR('',#278623); +#313235 = CURVE_STYLE('',#313236,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#313236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313237 = OVER_RIDING_STYLED_ITEM('overriding color',(#313238),#58712, + #313228); +#313238 = PRESENTATION_STYLE_ASSIGNMENT((#313239)); +#313239 = SURFACE_STYLE_USAGE(.BOTH.,#313240); +#313240 = SURFACE_SIDE_STYLE('',(#313241)); +#313241 = SURFACE_STYLE_FILL_AREA(#313242); +#313242 = FILL_AREA_STYLE('',(#313243)); +#313243 = FILL_AREA_STYLE_COLOUR('',#313244); +#313244 = COLOUR_RGB('',0.272999999305,0.272999999305,0.272999999305); +#313245 = OVER_RIDING_STYLED_ITEM('overriding color',(#313246),#58988, + #313228); +#313246 = PRESENTATION_STYLE_ASSIGNMENT((#313247)); +#313247 = SURFACE_STYLE_USAGE(.BOTH.,#313248); +#313248 = SURFACE_SIDE_STYLE('',(#313249)); +#313249 = SURFACE_STYLE_FILL_AREA(#313250); +#313250 = FILL_AREA_STYLE('',(#313251)); +#313251 = FILL_AREA_STYLE_COLOUR('',#313244); +#313252 = OVER_RIDING_STYLED_ITEM('overriding color',(#313253),#59019, + #313228); +#313253 = PRESENTATION_STYLE_ASSIGNMENT((#313254)); +#313254 = SURFACE_STYLE_USAGE(.BOTH.,#313255); +#313255 = SURFACE_SIDE_STYLE('',(#313256)); +#313256 = SURFACE_STYLE_FILL_AREA(#313257); +#313257 = FILL_AREA_STYLE('',(#313258)); +#313258 = FILL_AREA_STYLE_COLOUR('',#313244); +#313259 = OVER_RIDING_STYLED_ITEM('overriding color',(#313260),#59044, + #313228); +#313260 = PRESENTATION_STYLE_ASSIGNMENT((#313261)); +#313261 = SURFACE_STYLE_USAGE(.BOTH.,#313262); +#313262 = SURFACE_SIDE_STYLE('',(#313263)); +#313263 = SURFACE_STYLE_FILL_AREA(#313264); +#313264 = FILL_AREA_STYLE('',(#313265)); +#313265 = FILL_AREA_STYLE_COLOUR('',#313244); +#313266 = OVER_RIDING_STYLED_ITEM('overriding color',(#313267),#59121, + #313228); +#313267 = PRESENTATION_STYLE_ASSIGNMENT((#313268)); +#313268 = SURFACE_STYLE_USAGE(.BOTH.,#313269); +#313269 = SURFACE_SIDE_STYLE('',(#313270)); +#313270 = SURFACE_STYLE_FILL_AREA(#313271); +#313271 = FILL_AREA_STYLE('',(#313272)); +#313272 = FILL_AREA_STYLE_COLOUR('',#313244); +#313273 = OVER_RIDING_STYLED_ITEM('overriding color',(#313274),#59145, + #313228); +#313274 = PRESENTATION_STYLE_ASSIGNMENT((#313275)); +#313275 = SURFACE_STYLE_USAGE(.BOTH.,#313276); +#313276 = SURFACE_SIDE_STYLE('',(#313277)); +#313277 = SURFACE_STYLE_FILL_AREA(#313278); +#313278 = FILL_AREA_STYLE('',(#313279)); +#313279 = FILL_AREA_STYLE_COLOUR('',#313244); +#313280 = OVER_RIDING_STYLED_ITEM('overriding color',(#313281),#59170, + #313228); +#313281 = PRESENTATION_STYLE_ASSIGNMENT((#313282)); +#313282 = SURFACE_STYLE_USAGE(.BOTH.,#313283); +#313283 = SURFACE_SIDE_STYLE('',(#313284)); +#313284 = SURFACE_STYLE_FILL_AREA(#313285); +#313285 = FILL_AREA_STYLE('',(#313286)); +#313286 = FILL_AREA_STYLE_COLOUR('',#313244); +#313287 = OVER_RIDING_STYLED_ITEM('overriding color',(#313288),#59195, + #313228); +#313288 = PRESENTATION_STYLE_ASSIGNMENT((#313289)); +#313289 = SURFACE_STYLE_USAGE(.BOTH.,#313290); +#313290 = SURFACE_SIDE_STYLE('',(#313291)); +#313291 = SURFACE_STYLE_FILL_AREA(#313292); +#313292 = FILL_AREA_STYLE('',(#313293)); +#313293 = FILL_AREA_STYLE_COLOUR('',#313244); +#313294 = OVER_RIDING_STYLED_ITEM('overriding color',(#313295),#59251, + #313228); +#313295 = PRESENTATION_STYLE_ASSIGNMENT((#313296)); +#313296 = SURFACE_STYLE_USAGE(.BOTH.,#313297); +#313297 = SURFACE_SIDE_STYLE('',(#313298)); +#313298 = SURFACE_STYLE_FILL_AREA(#313299); +#313299 = FILL_AREA_STYLE('',(#313300)); +#313300 = FILL_AREA_STYLE_COLOUR('',#313244); +#313301 = OVER_RIDING_STYLED_ITEM('overriding color',(#313302),#59275, + #313228); +#313302 = PRESENTATION_STYLE_ASSIGNMENT((#313303)); +#313303 = SURFACE_STYLE_USAGE(.BOTH.,#313304); +#313304 = SURFACE_SIDE_STYLE('',(#313305)); +#313305 = SURFACE_STYLE_FILL_AREA(#313306); +#313306 = FILL_AREA_STYLE('',(#313307)); +#313307 = FILL_AREA_STYLE_COLOUR('',#313244); +#313308 = OVER_RIDING_STYLED_ITEM('overriding color',(#313309),#59300, + #313228); +#313309 = PRESENTATION_STYLE_ASSIGNMENT((#313310)); +#313310 = SURFACE_STYLE_USAGE(.BOTH.,#313311); +#313311 = SURFACE_SIDE_STYLE('',(#313312)); +#313312 = SURFACE_STYLE_FILL_AREA(#313313); +#313313 = FILL_AREA_STYLE('',(#313314)); +#313314 = FILL_AREA_STYLE_COLOUR('',#313244); +#313315 = OVER_RIDING_STYLED_ITEM('overriding color',(#313316),#59370, + #313228); +#313316 = PRESENTATION_STYLE_ASSIGNMENT((#313317)); +#313317 = SURFACE_STYLE_USAGE(.BOTH.,#313318); +#313318 = SURFACE_SIDE_STYLE('',(#313319)); +#313319 = SURFACE_STYLE_FILL_AREA(#313320); +#313320 = FILL_AREA_STYLE('',(#313321)); +#313321 = FILL_AREA_STYLE_COLOUR('',#313244); +#313322 = OVER_RIDING_STYLED_ITEM('overriding color',(#313323),#59401, + #313228); +#313323 = PRESENTATION_STYLE_ASSIGNMENT((#313324)); +#313324 = SURFACE_STYLE_USAGE(.BOTH.,#313325); +#313325 = SURFACE_SIDE_STYLE('',(#313326)); +#313326 = SURFACE_STYLE_FILL_AREA(#313327); +#313327 = FILL_AREA_STYLE('',(#313328)); +#313328 = FILL_AREA_STYLE_COLOUR('',#313244); +#313329 = OVER_RIDING_STYLED_ITEM('overriding color',(#313330),#59432, + #313228); +#313330 = PRESENTATION_STYLE_ASSIGNMENT((#313331)); +#313331 = SURFACE_STYLE_USAGE(.BOTH.,#313332); +#313332 = SURFACE_SIDE_STYLE('',(#313333)); +#313333 = SURFACE_STYLE_FILL_AREA(#313334); +#313334 = FILL_AREA_STYLE('',(#313335)); +#313335 = FILL_AREA_STYLE_COLOUR('',#313244); +#313336 = OVER_RIDING_STYLED_ITEM('overriding color',(#313337),#59457, + #313228); +#313337 = PRESENTATION_STYLE_ASSIGNMENT((#313338)); +#313338 = SURFACE_STYLE_USAGE(.BOTH.,#313339); +#313339 = SURFACE_SIDE_STYLE('',(#313340)); +#313340 = SURFACE_STYLE_FILL_AREA(#313341); +#313341 = FILL_AREA_STYLE('',(#313342)); +#313342 = FILL_AREA_STYLE_COLOUR('',#313244); +#313343 = OVER_RIDING_STYLED_ITEM('overriding color',(#313344),#59482, + #313228); +#313344 = PRESENTATION_STYLE_ASSIGNMENT((#313345)); +#313345 = SURFACE_STYLE_USAGE(.BOTH.,#313346); +#313346 = SURFACE_SIDE_STYLE('',(#313347)); +#313347 = SURFACE_STYLE_FILL_AREA(#313348); +#313348 = FILL_AREA_STYLE('',(#313349)); +#313349 = FILL_AREA_STYLE_COLOUR('',#313244); +#313350 = OVER_RIDING_STYLED_ITEM('overriding color',(#313351),#59506, + #313228); +#313351 = PRESENTATION_STYLE_ASSIGNMENT((#313352)); +#313352 = SURFACE_STYLE_USAGE(.BOTH.,#313353); +#313353 = SURFACE_SIDE_STYLE('',(#313354)); +#313354 = SURFACE_STYLE_FILL_AREA(#313355); +#313355 = FILL_AREA_STYLE('',(#313356)); +#313356 = FILL_AREA_STYLE_COLOUR('',#313244); +#313357 = OVER_RIDING_STYLED_ITEM('overriding color',(#313358),#59530, + #313228); +#313358 = PRESENTATION_STYLE_ASSIGNMENT((#313359)); +#313359 = SURFACE_STYLE_USAGE(.BOTH.,#313360); +#313360 = SURFACE_SIDE_STYLE('',(#313361)); +#313361 = SURFACE_STYLE_FILL_AREA(#313362); +#313362 = FILL_AREA_STYLE('',(#313363)); +#313363 = FILL_AREA_STYLE_COLOUR('',#313244); +#313364 = OVER_RIDING_STYLED_ITEM('overriding color',(#313365),#59555, + #313228); +#313365 = PRESENTATION_STYLE_ASSIGNMENT((#313366)); +#313366 = SURFACE_STYLE_USAGE(.BOTH.,#313367); +#313367 = SURFACE_SIDE_STYLE('',(#313368)); +#313368 = SURFACE_STYLE_FILL_AREA(#313369); +#313369 = FILL_AREA_STYLE('',(#313370)); +#313370 = FILL_AREA_STYLE_COLOUR('',#313244); +#313371 = OVER_RIDING_STYLED_ITEM('overriding color',(#313372),#59580, + #313228); +#313372 = PRESENTATION_STYLE_ASSIGNMENT((#313373)); +#313373 = SURFACE_STYLE_USAGE(.BOTH.,#313374); +#313374 = SURFACE_SIDE_STYLE('',(#313375)); +#313375 = SURFACE_STYLE_FILL_AREA(#313376); +#313376 = FILL_AREA_STYLE('',(#313377)); +#313377 = FILL_AREA_STYLE_COLOUR('',#313244); +#313378 = OVER_RIDING_STYLED_ITEM('overriding color',(#313379),#59604, + #313228); +#313379 = PRESENTATION_STYLE_ASSIGNMENT((#313380)); +#313380 = SURFACE_STYLE_USAGE(.BOTH.,#313381); +#313381 = SURFACE_SIDE_STYLE('',(#313382)); +#313382 = SURFACE_STYLE_FILL_AREA(#313383); +#313383 = FILL_AREA_STYLE('',(#313384)); +#313384 = FILL_AREA_STYLE_COLOUR('',#313244); +#313385 = OVER_RIDING_STYLED_ITEM('overriding color',(#313386),#59628, + #313228); +#313386 = PRESENTATION_STYLE_ASSIGNMENT((#313387)); +#313387 = SURFACE_STYLE_USAGE(.BOTH.,#313388); +#313388 = SURFACE_SIDE_STYLE('',(#313389)); +#313389 = SURFACE_STYLE_FILL_AREA(#313390); +#313390 = FILL_AREA_STYLE('',(#313391)); +#313391 = FILL_AREA_STYLE_COLOUR('',#313244); +#313392 = OVER_RIDING_STYLED_ITEM('overriding color',(#313393),#59653, + #313228); +#313393 = PRESENTATION_STYLE_ASSIGNMENT((#313394)); +#313394 = SURFACE_STYLE_USAGE(.BOTH.,#313395); +#313395 = SURFACE_SIDE_STYLE('',(#313396)); +#313396 = SURFACE_STYLE_FILL_AREA(#313397); +#313397 = FILL_AREA_STYLE('',(#313398)); +#313398 = FILL_AREA_STYLE_COLOUR('',#313244); +#313399 = OVER_RIDING_STYLED_ITEM('overriding color',(#313400),#59684, + #313228); +#313400 = PRESENTATION_STYLE_ASSIGNMENT((#313401)); +#313401 = SURFACE_STYLE_USAGE(.BOTH.,#313402); +#313402 = SURFACE_SIDE_STYLE('',(#313403)); +#313403 = SURFACE_STYLE_FILL_AREA(#313404); +#313404 = FILL_AREA_STYLE('',(#313405)); +#313405 = FILL_AREA_STYLE_COLOUR('',#313244); +#313406 = OVER_RIDING_STYLED_ITEM('overriding color',(#313407),#59740, + #313228); +#313407 = PRESENTATION_STYLE_ASSIGNMENT((#313408)); +#313408 = SURFACE_STYLE_USAGE(.BOTH.,#313409); +#313409 = SURFACE_SIDE_STYLE('',(#313410)); +#313410 = SURFACE_STYLE_FILL_AREA(#313411); +#313411 = FILL_AREA_STYLE('',(#313412)); +#313412 = FILL_AREA_STYLE_COLOUR('',#313244); +#313413 = OVER_RIDING_STYLED_ITEM('overriding color',(#313414),#59765, + #313228); +#313414 = PRESENTATION_STYLE_ASSIGNMENT((#313415)); +#313415 = SURFACE_STYLE_USAGE(.BOTH.,#313416); +#313416 = SURFACE_SIDE_STYLE('',(#313417)); +#313417 = SURFACE_STYLE_FILL_AREA(#313418); +#313418 = FILL_AREA_STYLE('',(#313419)); +#313419 = FILL_AREA_STYLE_COLOUR('',#313244); +#313420 = OVER_RIDING_STYLED_ITEM('overriding color',(#313421),#59783, + #313228); +#313421 = PRESENTATION_STYLE_ASSIGNMENT((#313422)); +#313422 = SURFACE_STYLE_USAGE(.BOTH.,#313423); +#313423 = SURFACE_SIDE_STYLE('',(#313424)); +#313424 = SURFACE_STYLE_FILL_AREA(#313425); +#313425 = FILL_AREA_STYLE('',(#313426)); +#313426 = FILL_AREA_STYLE_COLOUR('',#313244); +#313427 = OVER_RIDING_STYLED_ITEM('overriding color',(#313428),#59807, + #313228); +#313428 = PRESENTATION_STYLE_ASSIGNMENT((#313429)); +#313429 = SURFACE_STYLE_USAGE(.BOTH.,#313430); +#313430 = SURFACE_SIDE_STYLE('',(#313431)); +#313431 = SURFACE_STYLE_FILL_AREA(#313432); +#313432 = FILL_AREA_STYLE('',(#313433)); +#313433 = FILL_AREA_STYLE_COLOUR('',#313244); +#313434 = OVER_RIDING_STYLED_ITEM('overriding color',(#313435),#59832, + #313228); +#313435 = PRESENTATION_STYLE_ASSIGNMENT((#313436)); +#313436 = SURFACE_STYLE_USAGE(.BOTH.,#313437); +#313437 = SURFACE_SIDE_STYLE('',(#313438)); +#313438 = SURFACE_STYLE_FILL_AREA(#313439); +#313439 = FILL_AREA_STYLE('',(#313440)); +#313440 = FILL_AREA_STYLE_COLOUR('',#313244); +#313441 = OVER_RIDING_STYLED_ITEM('overriding color',(#313442),#59856, + #313228); +#313442 = PRESENTATION_STYLE_ASSIGNMENT((#313443)); +#313443 = SURFACE_STYLE_USAGE(.BOTH.,#313444); +#313444 = SURFACE_SIDE_STYLE('',(#313445)); +#313445 = SURFACE_STYLE_FILL_AREA(#313446); +#313446 = FILL_AREA_STYLE('',(#313447)); +#313447 = FILL_AREA_STYLE_COLOUR('',#313244); +#313448 = OVER_RIDING_STYLED_ITEM('overriding color',(#313449),#59873, + #313228); +#313449 = PRESENTATION_STYLE_ASSIGNMENT((#313450)); +#313450 = SURFACE_STYLE_USAGE(.BOTH.,#313451); +#313451 = SURFACE_SIDE_STYLE('',(#313452)); +#313452 = SURFACE_STYLE_FILL_AREA(#313453); +#313453 = FILL_AREA_STYLE('',(#313454)); +#313454 = FILL_AREA_STYLE_COLOUR('',#313244); +#313455 = OVER_RIDING_STYLED_ITEM('overriding color',(#313456),#59887, + #313228); +#313456 = PRESENTATION_STYLE_ASSIGNMENT((#313457)); +#313457 = SURFACE_STYLE_USAGE(.BOTH.,#313458); +#313458 = SURFACE_SIDE_STYLE('',(#313459)); +#313459 = SURFACE_STYLE_FILL_AREA(#313460); +#313460 = FILL_AREA_STYLE('',(#313461)); +#313461 = FILL_AREA_STYLE_COLOUR('',#313244); +#313462 = OVER_RIDING_STYLED_ITEM('overriding color',(#313463),#59912, + #313228); +#313463 = PRESENTATION_STYLE_ASSIGNMENT((#313464)); +#313464 = SURFACE_STYLE_USAGE(.BOTH.,#313465); +#313465 = SURFACE_SIDE_STYLE('',(#313466)); +#313466 = SURFACE_STYLE_FILL_AREA(#313467); +#313467 = FILL_AREA_STYLE('',(#313468)); +#313468 = FILL_AREA_STYLE_COLOUR('',#313244); +#313469 = OVER_RIDING_STYLED_ITEM('overriding color',(#313470),#59952, + #313228); +#313470 = PRESENTATION_STYLE_ASSIGNMENT((#313471)); +#313471 = SURFACE_STYLE_USAGE(.BOTH.,#313472); +#313472 = SURFACE_SIDE_STYLE('',(#313473)); +#313473 = SURFACE_STYLE_FILL_AREA(#313474); +#313474 = FILL_AREA_STYLE('',(#313475)); +#313475 = FILL_AREA_STYLE_COLOUR('',#313244); +#313476 = OVER_RIDING_STYLED_ITEM('overriding color',(#313477),#59976, + #313228); +#313477 = PRESENTATION_STYLE_ASSIGNMENT((#313478)); +#313478 = SURFACE_STYLE_USAGE(.BOTH.,#313479); +#313479 = SURFACE_SIDE_STYLE('',(#313480)); +#313480 = SURFACE_STYLE_FILL_AREA(#313481); +#313481 = FILL_AREA_STYLE('',(#313482)); +#313482 = FILL_AREA_STYLE_COLOUR('',#313244); +#313483 = OVER_RIDING_STYLED_ITEM('overriding color',(#313484),#60016, + #313228); +#313484 = PRESENTATION_STYLE_ASSIGNMENT((#313485)); +#313485 = SURFACE_STYLE_USAGE(.BOTH.,#313486); +#313486 = SURFACE_SIDE_STYLE('',(#313487)); +#313487 = SURFACE_STYLE_FILL_AREA(#313488); +#313488 = FILL_AREA_STYLE('',(#313489)); +#313489 = FILL_AREA_STYLE_COLOUR('',#313244); +#313490 = OVER_RIDING_STYLED_ITEM('overriding color',(#313491),#60034, + #313228); +#313491 = PRESENTATION_STYLE_ASSIGNMENT((#313492)); +#313492 = SURFACE_STYLE_USAGE(.BOTH.,#313493); +#313493 = SURFACE_SIDE_STYLE('',(#313494)); +#313494 = SURFACE_STYLE_FILL_AREA(#313495); +#313495 = FILL_AREA_STYLE('',(#313496)); +#313496 = FILL_AREA_STYLE_COLOUR('',#313244); +#313497 = OVER_RIDING_STYLED_ITEM('overriding color',(#313498),#60051, + #313228); +#313498 = PRESENTATION_STYLE_ASSIGNMENT((#313499)); +#313499 = SURFACE_STYLE_USAGE(.BOTH.,#313500); +#313500 = SURFACE_SIDE_STYLE('',(#313501)); +#313501 = SURFACE_STYLE_FILL_AREA(#313502); +#313502 = FILL_AREA_STYLE('',(#313503)); +#313503 = FILL_AREA_STYLE_COLOUR('',#313244); +#313504 = OVER_RIDING_STYLED_ITEM('overriding color',(#313505),#60076, + #313228); +#313505 = PRESENTATION_STYLE_ASSIGNMENT((#313506)); +#313506 = SURFACE_STYLE_USAGE(.BOTH.,#313507); +#313507 = SURFACE_SIDE_STYLE('',(#313508)); +#313508 = SURFACE_STYLE_FILL_AREA(#313509); +#313509 = FILL_AREA_STYLE('',(#313510)); +#313510 = FILL_AREA_STYLE_COLOUR('',#313244); +#313511 = OVER_RIDING_STYLED_ITEM('overriding color',(#313512),#60100, + #313228); +#313512 = PRESENTATION_STYLE_ASSIGNMENT((#313513)); +#313513 = SURFACE_STYLE_USAGE(.BOTH.,#313514); +#313514 = SURFACE_SIDE_STYLE('',(#313515)); +#313515 = SURFACE_STYLE_FILL_AREA(#313516); +#313516 = FILL_AREA_STYLE('',(#313517)); +#313517 = FILL_AREA_STYLE_COLOUR('',#313244); +#313518 = OVER_RIDING_STYLED_ITEM('overriding color',(#313519),#60161, + #313228); +#313519 = PRESENTATION_STYLE_ASSIGNMENT((#313520)); +#313520 = SURFACE_STYLE_USAGE(.BOTH.,#313521); +#313521 = SURFACE_SIDE_STYLE('',(#313522)); +#313522 = SURFACE_STYLE_FILL_AREA(#313523); +#313523 = FILL_AREA_STYLE('',(#313524)); +#313524 = FILL_AREA_STYLE_COLOUR('',#313244); +#313525 = OVER_RIDING_STYLED_ITEM('overriding color',(#313526),#60173, + #313228); +#313526 = PRESENTATION_STYLE_ASSIGNMENT((#313527)); +#313527 = SURFACE_STYLE_USAGE(.BOTH.,#313528); +#313528 = SURFACE_SIDE_STYLE('',(#313529)); +#313529 = SURFACE_STYLE_FILL_AREA(#313530); +#313530 = FILL_AREA_STYLE('',(#313531)); +#313531 = FILL_AREA_STYLE_COLOUR('',#313244); +#313532 = OVER_RIDING_STYLED_ITEM('overriding color',(#313533),#60190, + #313228); +#313533 = PRESENTATION_STYLE_ASSIGNMENT((#313534)); +#313534 = SURFACE_STYLE_USAGE(.BOTH.,#313535); +#313535 = SURFACE_SIDE_STYLE('',(#313536)); +#313536 = SURFACE_STYLE_FILL_AREA(#313537); +#313537 = FILL_AREA_STYLE('',(#313538)); +#313538 = FILL_AREA_STYLE_COLOUR('',#313244); +#313539 = OVER_RIDING_STYLED_ITEM('overriding color',(#313540),#60207, + #313228); +#313540 = PRESENTATION_STYLE_ASSIGNMENT((#313541)); +#313541 = SURFACE_STYLE_USAGE(.BOTH.,#313542); +#313542 = SURFACE_SIDE_STYLE('',(#313543)); +#313543 = SURFACE_STYLE_FILL_AREA(#313544); +#313544 = FILL_AREA_STYLE('',(#313545)); +#313545 = FILL_AREA_STYLE_COLOUR('',#313244); +#313546 = OVER_RIDING_STYLED_ITEM('overriding color',(#313547),#60233, + #313228); +#313547 = PRESENTATION_STYLE_ASSIGNMENT((#313548)); +#313548 = SURFACE_STYLE_USAGE(.BOTH.,#313549); +#313549 = SURFACE_SIDE_STYLE('',(#313550)); +#313550 = SURFACE_STYLE_FILL_AREA(#313551); +#313551 = FILL_AREA_STYLE('',(#313552)); +#313552 = FILL_AREA_STYLE_COLOUR('',#313244); +#313553 = OVER_RIDING_STYLED_ITEM('overriding color',(#313554),#60257, + #313228); +#313554 = PRESENTATION_STYLE_ASSIGNMENT((#313555)); +#313555 = SURFACE_STYLE_USAGE(.BOTH.,#313556); +#313556 = SURFACE_SIDE_STYLE('',(#313557)); +#313557 = SURFACE_STYLE_FILL_AREA(#313558); +#313558 = FILL_AREA_STYLE('',(#313559)); +#313559 = FILL_AREA_STYLE_COLOUR('',#313244); +#313560 = OVER_RIDING_STYLED_ITEM('overriding color',(#313561),#60288, + #313228); +#313561 = PRESENTATION_STYLE_ASSIGNMENT((#313562)); +#313562 = SURFACE_STYLE_USAGE(.BOTH.,#313563); +#313563 = SURFACE_SIDE_STYLE('',(#313564)); +#313564 = SURFACE_STYLE_FILL_AREA(#313565); +#313565 = FILL_AREA_STYLE('',(#313566)); +#313566 = FILL_AREA_STYLE_COLOUR('',#313244); +#313567 = OVER_RIDING_STYLED_ITEM('overriding color',(#313568),#60306, + #313228); +#313568 = PRESENTATION_STYLE_ASSIGNMENT((#313569)); +#313569 = SURFACE_STYLE_USAGE(.BOTH.,#313570); +#313570 = SURFACE_SIDE_STYLE('',(#313571)); +#313571 = SURFACE_STYLE_FILL_AREA(#313572); +#313572 = FILL_AREA_STYLE('',(#313573)); +#313573 = FILL_AREA_STYLE_COLOUR('',#313244); +#313574 = OVER_RIDING_STYLED_ITEM('overriding color',(#313575),#60320, + #313228); +#313575 = PRESENTATION_STYLE_ASSIGNMENT((#313576)); +#313576 = SURFACE_STYLE_USAGE(.BOTH.,#313577); +#313577 = SURFACE_SIDE_STYLE('',(#313578)); +#313578 = SURFACE_STYLE_FILL_AREA(#313579); +#313579 = FILL_AREA_STYLE('',(#313580)); +#313580 = FILL_AREA_STYLE_COLOUR('',#313244); +#313581 = OVER_RIDING_STYLED_ITEM('overriding color',(#313582),#60334, + #313228); +#313582 = PRESENTATION_STYLE_ASSIGNMENT((#313583)); +#313583 = SURFACE_STYLE_USAGE(.BOTH.,#313584); +#313584 = SURFACE_SIDE_STYLE('',(#313585)); +#313585 = SURFACE_STYLE_FILL_AREA(#313586); +#313586 = FILL_AREA_STYLE('',(#313587)); +#313587 = FILL_AREA_STYLE_COLOUR('',#313244); +#313588 = OVER_RIDING_STYLED_ITEM('overriding color',(#313589),#60348, + #313228); +#313589 = PRESENTATION_STYLE_ASSIGNMENT((#313590)); +#313590 = SURFACE_STYLE_USAGE(.BOTH.,#313591); +#313591 = SURFACE_SIDE_STYLE('',(#313592)); +#313592 = SURFACE_STYLE_FILL_AREA(#313593); +#313593 = FILL_AREA_STYLE('',(#313594)); +#313594 = FILL_AREA_STYLE_COLOUR('',#313244); +#313595 = OVER_RIDING_STYLED_ITEM('overriding color',(#313596),#60360, + #313228); +#313596 = PRESENTATION_STYLE_ASSIGNMENT((#313597)); +#313597 = SURFACE_STYLE_USAGE(.BOTH.,#313598); +#313598 = SURFACE_SIDE_STYLE('',(#313599)); +#313599 = SURFACE_STYLE_FILL_AREA(#313600); +#313600 = FILL_AREA_STYLE('',(#313601)); +#313601 = FILL_AREA_STYLE_COLOUR('',#313244); +#313602 = OVER_RIDING_STYLED_ITEM('overriding color',(#313603),#60372, + #313228); +#313603 = PRESENTATION_STYLE_ASSIGNMENT((#313604)); +#313604 = SURFACE_STYLE_USAGE(.BOTH.,#313605); +#313605 = SURFACE_SIDE_STYLE('',(#313606)); +#313606 = SURFACE_STYLE_FILL_AREA(#313607); +#313607 = FILL_AREA_STYLE('',(#313608)); +#313608 = FILL_AREA_STYLE_COLOUR('',#313244); +#313609 = OVER_RIDING_STYLED_ITEM('overriding color',(#313610),#60384, + #313228); +#313610 = PRESENTATION_STYLE_ASSIGNMENT((#313611)); +#313611 = SURFACE_STYLE_USAGE(.BOTH.,#313612); +#313612 = SURFACE_SIDE_STYLE('',(#313613)); +#313613 = SURFACE_STYLE_FILL_AREA(#313614); +#313614 = FILL_AREA_STYLE('',(#313615)); +#313615 = FILL_AREA_STYLE_COLOUR('',#313244); +#313616 = STYLED_ITEM('color',(#313617),#60396); +#313617 = PRESENTATION_STYLE_ASSIGNMENT((#313618,#313623)); +#313618 = SURFACE_STYLE_USAGE(.BOTH.,#313619); +#313619 = SURFACE_SIDE_STYLE('',(#313620)); +#313620 = SURFACE_STYLE_FILL_AREA(#313621); +#313621 = FILL_AREA_STYLE('',(#313622)); +#313622 = FILL_AREA_STYLE_COLOUR('',#278623); +#313623 = CURVE_STYLE('',#313624,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#313624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#313625 = OVER_RIDING_STYLED_ITEM('overriding color',(#313626),#60398, + #313616); +#313626 = PRESENTATION_STYLE_ASSIGNMENT((#313627)); +#313627 = SURFACE_STYLE_USAGE(.BOTH.,#313628); +#313628 = SURFACE_SIDE_STYLE('',(#313629)); +#313629 = SURFACE_STYLE_FILL_AREA(#313630); +#313630 = FILL_AREA_STYLE('',(#313631)); +#313631 = FILL_AREA_STYLE_COLOUR('',#282540); +#313632 = OVER_RIDING_STYLED_ITEM('overriding color',(#313633),#60522, + #313616); +#313633 = PRESENTATION_STYLE_ASSIGNMENT((#313634)); +#313634 = SURFACE_STYLE_USAGE(.BOTH.,#313635); +#313635 = SURFACE_SIDE_STYLE('',(#313636)); +#313636 = SURFACE_STYLE_FILL_AREA(#313637); +#313637 = FILL_AREA_STYLE('',(#313638)); +#313638 = FILL_AREA_STYLE_COLOUR('',#282540); +#313639 = OVER_RIDING_STYLED_ITEM('overriding color',(#313640),#60553, + #313616); +#313640 = PRESENTATION_STYLE_ASSIGNMENT((#313641)); +#313641 = SURFACE_STYLE_USAGE(.BOTH.,#313642); +#313642 = SURFACE_SIDE_STYLE('',(#313643)); +#313643 = SURFACE_STYLE_FILL_AREA(#313644); +#313644 = FILL_AREA_STYLE('',(#313645)); +#313645 = FILL_AREA_STYLE_COLOUR('',#282540); +#313646 = OVER_RIDING_STYLED_ITEM('overriding color',(#313647),#60578, + #313616); +#313647 = PRESENTATION_STYLE_ASSIGNMENT((#313648)); +#313648 = SURFACE_STYLE_USAGE(.BOTH.,#313649); +#313649 = SURFACE_SIDE_STYLE('',(#313650)); +#313650 = SURFACE_STYLE_FILL_AREA(#313651); +#313651 = FILL_AREA_STYLE('',(#313652)); +#313652 = FILL_AREA_STYLE_COLOUR('',#282540); +#313653 = OVER_RIDING_STYLED_ITEM('overriding color',(#313654),#60609, + #313616); +#313654 = PRESENTATION_STYLE_ASSIGNMENT((#313655)); +#313655 = SURFACE_STYLE_USAGE(.BOTH.,#313656); +#313656 = SURFACE_SIDE_STYLE('',(#313657)); +#313657 = SURFACE_STYLE_FILL_AREA(#313658); +#313658 = FILL_AREA_STYLE('',(#313659)); +#313659 = FILL_AREA_STYLE_COLOUR('',#282540); +#313660 = OVER_RIDING_STYLED_ITEM('overriding color',(#313661),#60633, + #313616); +#313661 = PRESENTATION_STYLE_ASSIGNMENT((#313662)); +#313662 = SURFACE_STYLE_USAGE(.BOTH.,#313663); +#313663 = SURFACE_SIDE_STYLE('',(#313664)); +#313664 = SURFACE_STYLE_FILL_AREA(#313665); +#313665 = FILL_AREA_STYLE('',(#313666)); +#313666 = FILL_AREA_STYLE_COLOUR('',#282540); +#313667 = OVER_RIDING_STYLED_ITEM('overriding color',(#313668),#60698, + #313616); +#313668 = PRESENTATION_STYLE_ASSIGNMENT((#313669)); +#313669 = SURFACE_STYLE_USAGE(.BOTH.,#313670); +#313670 = SURFACE_SIDE_STYLE('',(#313671)); +#313671 = SURFACE_STYLE_FILL_AREA(#313672); +#313672 = FILL_AREA_STYLE('',(#313673)); +#313673 = FILL_AREA_STYLE_COLOUR('',#282540); +#313674 = OVER_RIDING_STYLED_ITEM('overriding color',(#313675),#60723, + #313616); +#313675 = PRESENTATION_STYLE_ASSIGNMENT((#313676)); +#313676 = SURFACE_STYLE_USAGE(.BOTH.,#313677); +#313677 = SURFACE_SIDE_STYLE('',(#313678)); +#313678 = SURFACE_STYLE_FILL_AREA(#313679); +#313679 = FILL_AREA_STYLE('',(#313680)); +#313680 = FILL_AREA_STYLE_COLOUR('',#282540); +#313681 = OVER_RIDING_STYLED_ITEM('overriding color',(#313682),#60748, + #313616); +#313682 = PRESENTATION_STYLE_ASSIGNMENT((#313683)); +#313683 = SURFACE_STYLE_USAGE(.BOTH.,#313684); +#313684 = SURFACE_SIDE_STYLE('',(#313685)); +#313685 = SURFACE_STYLE_FILL_AREA(#313686); +#313686 = FILL_AREA_STYLE('',(#313687)); +#313687 = FILL_AREA_STYLE_COLOUR('',#282540); +#313688 = OVER_RIDING_STYLED_ITEM('overriding color',(#313689),#60772, + #313616); +#313689 = PRESENTATION_STYLE_ASSIGNMENT((#313690)); +#313690 = SURFACE_STYLE_USAGE(.BOTH.,#313691); +#313691 = SURFACE_SIDE_STYLE('',(#313692)); +#313692 = SURFACE_STYLE_FILL_AREA(#313693); +#313693 = FILL_AREA_STYLE('',(#313694)); +#313694 = FILL_AREA_STYLE_COLOUR('',#282540); +#313695 = OVER_RIDING_STYLED_ITEM('overriding color',(#313696),#60829, + #313616); +#313696 = PRESENTATION_STYLE_ASSIGNMENT((#313697)); +#313697 = SURFACE_STYLE_USAGE(.BOTH.,#313698); +#313698 = SURFACE_SIDE_STYLE('',(#313699)); +#313699 = SURFACE_STYLE_FILL_AREA(#313700); +#313700 = FILL_AREA_STYLE('',(#313701)); +#313701 = FILL_AREA_STYLE_COLOUR('',#282540); +#313702 = OVER_RIDING_STYLED_ITEM('overriding color',(#313703),#60854, + #313616); +#313703 = PRESENTATION_STYLE_ASSIGNMENT((#313704)); +#313704 = SURFACE_STYLE_USAGE(.BOTH.,#313705); +#313705 = SURFACE_SIDE_STYLE('',(#313706)); +#313706 = SURFACE_STYLE_FILL_AREA(#313707); +#313707 = FILL_AREA_STYLE('',(#313708)); +#313708 = FILL_AREA_STYLE_COLOUR('',#282540); +#313709 = OVER_RIDING_STYLED_ITEM('overriding color',(#313710),#60885, + #313616); +#313710 = PRESENTATION_STYLE_ASSIGNMENT((#313711)); +#313711 = SURFACE_STYLE_USAGE(.BOTH.,#313712); +#313712 = SURFACE_SIDE_STYLE('',(#313713)); +#313713 = SURFACE_STYLE_FILL_AREA(#313714); +#313714 = FILL_AREA_STYLE('',(#313715)); +#313715 = FILL_AREA_STYLE_COLOUR('',#282540); +#313716 = OVER_RIDING_STYLED_ITEM('overriding color',(#313717),#60909, + #313616); +#313717 = PRESENTATION_STYLE_ASSIGNMENT((#313718)); +#313718 = SURFACE_STYLE_USAGE(.BOTH.,#313719); +#313719 = SURFACE_SIDE_STYLE('',(#313720)); +#313720 = SURFACE_STYLE_FILL_AREA(#313721); +#313721 = FILL_AREA_STYLE('',(#313722)); +#313722 = FILL_AREA_STYLE_COLOUR('',#282540); +#313723 = OVER_RIDING_STYLED_ITEM('overriding color',(#313724),#60940, + #313616); +#313724 = PRESENTATION_STYLE_ASSIGNMENT((#313725)); +#313725 = SURFACE_STYLE_USAGE(.BOTH.,#313726); +#313726 = SURFACE_SIDE_STYLE('',(#313727)); +#313727 = SURFACE_STYLE_FILL_AREA(#313728); +#313728 = FILL_AREA_STYLE('',(#313729)); +#313729 = FILL_AREA_STYLE_COLOUR('',#282540); +#313730 = OVER_RIDING_STYLED_ITEM('overriding color',(#313731),#60958, + #313616); +#313731 = PRESENTATION_STYLE_ASSIGNMENT((#313732)); +#313732 = SURFACE_STYLE_USAGE(.BOTH.,#313733); +#313733 = SURFACE_SIDE_STYLE('',(#313734)); +#313734 = SURFACE_STYLE_FILL_AREA(#313735); +#313735 = FILL_AREA_STYLE('',(#313736)); +#313736 = FILL_AREA_STYLE_COLOUR('',#282540); +#313737 = OVER_RIDING_STYLED_ITEM('overriding color',(#313738),#60982, + #313616); +#313738 = PRESENTATION_STYLE_ASSIGNMENT((#313739)); +#313739 = SURFACE_STYLE_USAGE(.BOTH.,#313740); +#313740 = SURFACE_SIDE_STYLE('',(#313741)); +#313741 = SURFACE_STYLE_FILL_AREA(#313742); +#313742 = FILL_AREA_STYLE('',(#313743)); +#313743 = FILL_AREA_STYLE_COLOUR('',#282540); +#313744 = OVER_RIDING_STYLED_ITEM('overriding color',(#313745),#61019, + #313616); +#313745 = PRESENTATION_STYLE_ASSIGNMENT((#313746)); +#313746 = SURFACE_STYLE_USAGE(.BOTH.,#313747); +#313747 = SURFACE_SIDE_STYLE('',(#313748)); +#313748 = SURFACE_STYLE_FILL_AREA(#313749); +#313749 = FILL_AREA_STYLE('',(#313750)); +#313750 = FILL_AREA_STYLE_COLOUR('',#282540); +#313751 = OVER_RIDING_STYLED_ITEM('overriding color',(#313752),#61052, + #313616); +#313752 = PRESENTATION_STYLE_ASSIGNMENT((#313753)); +#313753 = SURFACE_STYLE_USAGE(.BOTH.,#313754); +#313754 = SURFACE_SIDE_STYLE('',(#313755)); +#313755 = SURFACE_STYLE_FILL_AREA(#313756); +#313756 = FILL_AREA_STYLE('',(#313757)); +#313757 = FILL_AREA_STYLE_COLOUR('',#282540); +#313758 = OVER_RIDING_STYLED_ITEM('overriding color',(#313759),#61076, + #313616); +#313759 = PRESENTATION_STYLE_ASSIGNMENT((#313760)); +#313760 = SURFACE_STYLE_USAGE(.BOTH.,#313761); +#313761 = SURFACE_SIDE_STYLE('',(#313762)); +#313762 = SURFACE_STYLE_FILL_AREA(#313763); +#313763 = FILL_AREA_STYLE('',(#313764)); +#313764 = FILL_AREA_STYLE_COLOUR('',#282540); +#313765 = OVER_RIDING_STYLED_ITEM('overriding color',(#313766),#61227, + #313616); +#313766 = PRESENTATION_STYLE_ASSIGNMENT((#313767)); +#313767 = SURFACE_STYLE_USAGE(.BOTH.,#313768); +#313768 = SURFACE_SIDE_STYLE('',(#313769)); +#313769 = SURFACE_STYLE_FILL_AREA(#313770); +#313770 = FILL_AREA_STYLE('',(#313771)); +#313771 = FILL_AREA_STYLE_COLOUR('',#282540); +#313772 = OVER_RIDING_STYLED_ITEM('overriding color',(#313773),#61260, + #313616); +#313773 = PRESENTATION_STYLE_ASSIGNMENT((#313774)); +#313774 = SURFACE_STYLE_USAGE(.BOTH.,#313775); +#313775 = SURFACE_SIDE_STYLE('',(#313776)); +#313776 = SURFACE_STYLE_FILL_AREA(#313777); +#313777 = FILL_AREA_STYLE('',(#313778)); +#313778 = FILL_AREA_STYLE_COLOUR('',#282540); +#313779 = OVER_RIDING_STYLED_ITEM('overriding color',(#313780),#61277, + #313616); +#313780 = PRESENTATION_STYLE_ASSIGNMENT((#313781)); +#313781 = SURFACE_STYLE_USAGE(.BOTH.,#313782); +#313782 = SURFACE_SIDE_STYLE('',(#313783)); +#313783 = SURFACE_STYLE_FILL_AREA(#313784); +#313784 = FILL_AREA_STYLE('',(#313785)); +#313785 = FILL_AREA_STYLE_COLOUR('',#282540); +#313786 = OVER_RIDING_STYLED_ITEM('overriding color',(#313787),#61440, + #313616); +#313787 = PRESENTATION_STYLE_ASSIGNMENT((#313788)); +#313788 = SURFACE_STYLE_USAGE(.BOTH.,#313789); +#313789 = SURFACE_SIDE_STYLE('',(#313790)); +#313790 = SURFACE_STYLE_FILL_AREA(#313791); +#313791 = FILL_AREA_STYLE('',(#313792)); +#313792 = FILL_AREA_STYLE_COLOUR('',#282540); +#313793 = OVER_RIDING_STYLED_ITEM('overriding color',(#313794),#61473, + #313616); +#313794 = PRESENTATION_STYLE_ASSIGNMENT((#313795)); +#313795 = SURFACE_STYLE_USAGE(.BOTH.,#313796); +#313796 = SURFACE_SIDE_STYLE('',(#313797)); +#313797 = SURFACE_STYLE_FILL_AREA(#313798); +#313798 = FILL_AREA_STYLE('',(#313799)); +#313799 = FILL_AREA_STYLE_COLOUR('',#282540); +#313800 = OVER_RIDING_STYLED_ITEM('overriding color',(#313801),#61497, + #313616); +#313801 = PRESENTATION_STYLE_ASSIGNMENT((#313802)); +#313802 = SURFACE_STYLE_USAGE(.BOTH.,#313803); +#313803 = SURFACE_SIDE_STYLE('',(#313804)); +#313804 = SURFACE_STYLE_FILL_AREA(#313805); +#313805 = FILL_AREA_STYLE('',(#313806)); +#313806 = FILL_AREA_STYLE_COLOUR('',#282540); +#313807 = OVER_RIDING_STYLED_ITEM('overriding color',(#313808),#61521, + #313616); +#313808 = PRESENTATION_STYLE_ASSIGNMENT((#313809)); +#313809 = SURFACE_STYLE_USAGE(.BOTH.,#313810); +#313810 = SURFACE_SIDE_STYLE('',(#313811)); +#313811 = SURFACE_STYLE_FILL_AREA(#313812); +#313812 = FILL_AREA_STYLE('',(#313813)); +#313813 = FILL_AREA_STYLE_COLOUR('',#282540); +#313814 = OVER_RIDING_STYLED_ITEM('overriding color',(#313815),#61554, + #313616); +#313815 = PRESENTATION_STYLE_ASSIGNMENT((#313816)); +#313816 = SURFACE_STYLE_USAGE(.BOTH.,#313817); +#313817 = SURFACE_SIDE_STYLE('',(#313818)); +#313818 = SURFACE_STYLE_FILL_AREA(#313819); +#313819 = FILL_AREA_STYLE('',(#313820)); +#313820 = FILL_AREA_STYLE_COLOUR('',#282540); +#313821 = OVER_RIDING_STYLED_ITEM('overriding color',(#313822),#61571, + #313616); +#313822 = PRESENTATION_STYLE_ASSIGNMENT((#313823)); +#313823 = SURFACE_STYLE_USAGE(.BOTH.,#313824); +#313824 = SURFACE_SIDE_STYLE('',(#313825)); +#313825 = SURFACE_STYLE_FILL_AREA(#313826); +#313826 = FILL_AREA_STYLE('',(#313827)); +#313827 = FILL_AREA_STYLE_COLOUR('',#282540); +#313828 = OVER_RIDING_STYLED_ITEM('overriding color',(#313829),#61596, + #313616); +#313829 = PRESENTATION_STYLE_ASSIGNMENT((#313830)); +#313830 = SURFACE_STYLE_USAGE(.BOTH.,#313831); +#313831 = SURFACE_SIDE_STYLE('',(#313832)); +#313832 = SURFACE_STYLE_FILL_AREA(#313833); +#313833 = FILL_AREA_STYLE('',(#313834)); +#313834 = FILL_AREA_STYLE_COLOUR('',#282540); +#313835 = OVER_RIDING_STYLED_ITEM('overriding color',(#313836),#61613, + #313616); +#313836 = PRESENTATION_STYLE_ASSIGNMENT((#313837)); +#313837 = SURFACE_STYLE_USAGE(.BOTH.,#313838); +#313838 = SURFACE_SIDE_STYLE('',(#313839)); +#313839 = SURFACE_STYLE_FILL_AREA(#313840); +#313840 = FILL_AREA_STYLE('',(#313841)); +#313841 = FILL_AREA_STYLE_COLOUR('',#282540); +#313842 = OVER_RIDING_STYLED_ITEM('overriding color',(#313843),#61662, + #313616); +#313843 = PRESENTATION_STYLE_ASSIGNMENT((#313844)); +#313844 = SURFACE_STYLE_USAGE(.BOTH.,#313845); +#313845 = SURFACE_SIDE_STYLE('',(#313846)); +#313846 = SURFACE_STYLE_FILL_AREA(#313847); +#313847 = FILL_AREA_STYLE('',(#313848)); +#313848 = FILL_AREA_STYLE_COLOUR('',#282540); +#313849 = OVER_RIDING_STYLED_ITEM('overriding color',(#313850),#61687, + #313616); +#313850 = PRESENTATION_STYLE_ASSIGNMENT((#313851)); +#313851 = SURFACE_STYLE_USAGE(.BOTH.,#313852); +#313852 = SURFACE_SIDE_STYLE('',(#313853)); +#313853 = SURFACE_STYLE_FILL_AREA(#313854); +#313854 = FILL_AREA_STYLE('',(#313855)); +#313855 = FILL_AREA_STYLE_COLOUR('',#282540); +#313856 = OVER_RIDING_STYLED_ITEM('overriding color',(#313857),#61730, + #313616); +#313857 = PRESENTATION_STYLE_ASSIGNMENT((#313858)); +#313858 = SURFACE_STYLE_USAGE(.BOTH.,#313859); +#313859 = SURFACE_SIDE_STYLE('',(#313860)); +#313860 = SURFACE_STYLE_FILL_AREA(#313861); +#313861 = FILL_AREA_STYLE('',(#313862)); +#313862 = FILL_AREA_STYLE_COLOUR('',#282540); +#313863 = OVER_RIDING_STYLED_ITEM('overriding color',(#313864),#61746, + #313616); +#313864 = PRESENTATION_STYLE_ASSIGNMENT((#313865)); +#313865 = SURFACE_STYLE_USAGE(.BOTH.,#313866); +#313866 = SURFACE_SIDE_STYLE('',(#313867)); +#313867 = SURFACE_STYLE_FILL_AREA(#313868); +#313868 = FILL_AREA_STYLE('',(#313869)); +#313869 = FILL_AREA_STYLE_COLOUR('',#282540); +#313870 = OVER_RIDING_STYLED_ITEM('overriding color',(#313871),#61786, + #313616); +#313871 = PRESENTATION_STYLE_ASSIGNMENT((#313872)); +#313872 = SURFACE_STYLE_USAGE(.BOTH.,#313873); +#313873 = SURFACE_SIDE_STYLE('',(#313874)); +#313874 = SURFACE_STYLE_FILL_AREA(#313875); +#313875 = FILL_AREA_STYLE('',(#313876)); +#313876 = FILL_AREA_STYLE_COLOUR('',#282540); +#313877 = OVER_RIDING_STYLED_ITEM('overriding color',(#313878),#61842, + #313616); +#313878 = PRESENTATION_STYLE_ASSIGNMENT((#313879)); +#313879 = SURFACE_STYLE_USAGE(.BOTH.,#313880); +#313880 = SURFACE_SIDE_STYLE('',(#313881)); +#313881 = SURFACE_STYLE_FILL_AREA(#313882); +#313882 = FILL_AREA_STYLE('',(#313883)); +#313883 = FILL_AREA_STYLE_COLOUR('',#282540); +#313884 = OVER_RIDING_STYLED_ITEM('overriding color',(#313885),#61859, + #313616); +#313885 = PRESENTATION_STYLE_ASSIGNMENT((#313886)); +#313886 = SURFACE_STYLE_USAGE(.BOTH.,#313887); +#313887 = SURFACE_SIDE_STYLE('',(#313888)); +#313888 = SURFACE_STYLE_FILL_AREA(#313889); +#313889 = FILL_AREA_STYLE('',(#313890)); +#313890 = FILL_AREA_STYLE_COLOUR('',#282540); +#313891 = OVER_RIDING_STYLED_ITEM('overriding color',(#313892),#61884, + #313616); +#313892 = PRESENTATION_STYLE_ASSIGNMENT((#313893)); +#313893 = SURFACE_STYLE_USAGE(.BOTH.,#313894); +#313894 = SURFACE_SIDE_STYLE('',(#313895)); +#313895 = SURFACE_STYLE_FILL_AREA(#313896); +#313896 = FILL_AREA_STYLE('',(#313897)); +#313897 = FILL_AREA_STYLE_COLOUR('',#282540); +#313898 = OVER_RIDING_STYLED_ITEM('overriding color',(#313899),#61932, + #313616); +#313899 = PRESENTATION_STYLE_ASSIGNMENT((#313900)); +#313900 = SURFACE_STYLE_USAGE(.BOTH.,#313901); +#313901 = SURFACE_SIDE_STYLE('',(#313902)); +#313902 = SURFACE_STYLE_FILL_AREA(#313903); +#313903 = FILL_AREA_STYLE('',(#313904)); +#313904 = FILL_AREA_STYLE_COLOUR('',#282540); +#313905 = OVER_RIDING_STYLED_ITEM('overriding color',(#313906),#61963, + #313616); +#313906 = PRESENTATION_STYLE_ASSIGNMENT((#313907)); +#313907 = SURFACE_STYLE_USAGE(.BOTH.,#313908); +#313908 = SURFACE_SIDE_STYLE('',(#313909)); +#313909 = SURFACE_STYLE_FILL_AREA(#313910); +#313910 = FILL_AREA_STYLE('',(#313911)); +#313911 = FILL_AREA_STYLE_COLOUR('',#282540); +#313912 = OVER_RIDING_STYLED_ITEM('overriding color',(#313913),#61988, + #313616); +#313913 = PRESENTATION_STYLE_ASSIGNMENT((#313914)); +#313914 = SURFACE_STYLE_USAGE(.BOTH.,#313915); +#313915 = SURFACE_SIDE_STYLE('',(#313916)); +#313916 = SURFACE_STYLE_FILL_AREA(#313917); +#313917 = FILL_AREA_STYLE('',(#313918)); +#313918 = FILL_AREA_STYLE_COLOUR('',#282540); +#313919 = OVER_RIDING_STYLED_ITEM('overriding color',(#313920),#62013, + #313616); +#313920 = PRESENTATION_STYLE_ASSIGNMENT((#313921)); +#313921 = SURFACE_STYLE_USAGE(.BOTH.,#313922); +#313922 = SURFACE_SIDE_STYLE('',(#313923)); +#313923 = SURFACE_STYLE_FILL_AREA(#313924); +#313924 = FILL_AREA_STYLE('',(#313925)); +#313925 = FILL_AREA_STYLE_COLOUR('',#282540); +#313926 = OVER_RIDING_STYLED_ITEM('overriding color',(#313927),#62037, + #313616); +#313927 = PRESENTATION_STYLE_ASSIGNMENT((#313928)); +#313928 = SURFACE_STYLE_USAGE(.BOTH.,#313929); +#313929 = SURFACE_SIDE_STYLE('',(#313930)); +#313930 = SURFACE_STYLE_FILL_AREA(#313931); +#313931 = FILL_AREA_STYLE('',(#313932)); +#313932 = FILL_AREA_STYLE_COLOUR('',#282540); +#313933 = OVER_RIDING_STYLED_ITEM('overriding color',(#313934),#62061, + #313616); +#313934 = PRESENTATION_STYLE_ASSIGNMENT((#313935)); +#313935 = SURFACE_STYLE_USAGE(.BOTH.,#313936); +#313936 = SURFACE_SIDE_STYLE('',(#313937)); +#313937 = SURFACE_STYLE_FILL_AREA(#313938); +#313938 = FILL_AREA_STYLE('',(#313939)); +#313939 = FILL_AREA_STYLE_COLOUR('',#282540); +#313940 = OVER_RIDING_STYLED_ITEM('overriding color',(#313941),#62086, + #313616); +#313941 = PRESENTATION_STYLE_ASSIGNMENT((#313942)); +#313942 = SURFACE_STYLE_USAGE(.BOTH.,#313943); +#313943 = SURFACE_SIDE_STYLE('',(#313944)); +#313944 = SURFACE_STYLE_FILL_AREA(#313945); +#313945 = FILL_AREA_STYLE('',(#313946)); +#313946 = FILL_AREA_STYLE_COLOUR('',#282540); +#313947 = OVER_RIDING_STYLED_ITEM('overriding color',(#313948),#62111, + #313616); +#313948 = PRESENTATION_STYLE_ASSIGNMENT((#313949)); +#313949 = SURFACE_STYLE_USAGE(.BOTH.,#313950); +#313950 = SURFACE_SIDE_STYLE('',(#313951)); +#313951 = SURFACE_STYLE_FILL_AREA(#313952); +#313952 = FILL_AREA_STYLE('',(#313953)); +#313953 = FILL_AREA_STYLE_COLOUR('',#282540); +#313954 = OVER_RIDING_STYLED_ITEM('overriding color',(#313955),#62128, + #313616); +#313955 = PRESENTATION_STYLE_ASSIGNMENT((#313956)); +#313956 = SURFACE_STYLE_USAGE(.BOTH.,#313957); +#313957 = SURFACE_SIDE_STYLE('',(#313958)); +#313958 = SURFACE_STYLE_FILL_AREA(#313959); +#313959 = FILL_AREA_STYLE('',(#313960)); +#313960 = FILL_AREA_STYLE_COLOUR('',#282540); +#313961 = OVER_RIDING_STYLED_ITEM('overriding color',(#313962),#62152, + #313616); +#313962 = PRESENTATION_STYLE_ASSIGNMENT((#313963)); +#313963 = SURFACE_STYLE_USAGE(.BOTH.,#313964); +#313964 = SURFACE_SIDE_STYLE('',(#313965)); +#313965 = SURFACE_STYLE_FILL_AREA(#313966); +#313966 = FILL_AREA_STYLE('',(#313967)); +#313967 = FILL_AREA_STYLE_COLOUR('',#282540); +#313968 = OVER_RIDING_STYLED_ITEM('overriding color',(#313969),#62168, + #313616); +#313969 = PRESENTATION_STYLE_ASSIGNMENT((#313970)); +#313970 = SURFACE_STYLE_USAGE(.BOTH.,#313971); +#313971 = SURFACE_SIDE_STYLE('',(#313972)); +#313972 = SURFACE_STYLE_FILL_AREA(#313973); +#313973 = FILL_AREA_STYLE('',(#313974)); +#313974 = FILL_AREA_STYLE_COLOUR('',#282540); +#313975 = OVER_RIDING_STYLED_ITEM('overriding color',(#313976),#62185, + #313616); +#313976 = PRESENTATION_STYLE_ASSIGNMENT((#313977)); +#313977 = SURFACE_STYLE_USAGE(.BOTH.,#313978); +#313978 = SURFACE_SIDE_STYLE('',(#313979)); +#313979 = SURFACE_STYLE_FILL_AREA(#313980); +#313980 = FILL_AREA_STYLE('',(#313981)); +#313981 = FILL_AREA_STYLE_COLOUR('',#282540); +#313982 = OVER_RIDING_STYLED_ITEM('overriding color',(#313983),#62228, + #313616); +#313983 = PRESENTATION_STYLE_ASSIGNMENT((#313984)); +#313984 = SURFACE_STYLE_USAGE(.BOTH.,#313985); +#313985 = SURFACE_SIDE_STYLE('',(#313986)); +#313986 = SURFACE_STYLE_FILL_AREA(#313987); +#313987 = FILL_AREA_STYLE('',(#313988)); +#313988 = FILL_AREA_STYLE_COLOUR('',#282540); +#313989 = OVER_RIDING_STYLED_ITEM('overriding color',(#313990),#62252, + #313616); +#313990 = PRESENTATION_STYLE_ASSIGNMENT((#313991)); +#313991 = SURFACE_STYLE_USAGE(.BOTH.,#313992); +#313992 = SURFACE_SIDE_STYLE('',(#313993)); +#313993 = SURFACE_STYLE_FILL_AREA(#313994); +#313994 = FILL_AREA_STYLE('',(#313995)); +#313995 = FILL_AREA_STYLE_COLOUR('',#282540); +#313996 = OVER_RIDING_STYLED_ITEM('overriding color',(#313997),#62278, + #313616); +#313997 = PRESENTATION_STYLE_ASSIGNMENT((#313998)); +#313998 = SURFACE_STYLE_USAGE(.BOTH.,#313999); +#313999 = SURFACE_SIDE_STYLE('',(#314000)); +#314000 = SURFACE_STYLE_FILL_AREA(#314001); +#314001 = FILL_AREA_STYLE('',(#314002)); +#314002 = FILL_AREA_STYLE_COLOUR('',#282540); +#314003 = OVER_RIDING_STYLED_ITEM('overriding color',(#314004),#62321, + #313616); +#314004 = PRESENTATION_STYLE_ASSIGNMENT((#314005)); +#314005 = SURFACE_STYLE_USAGE(.BOTH.,#314006); +#314006 = SURFACE_SIDE_STYLE('',(#314007)); +#314007 = SURFACE_STYLE_FILL_AREA(#314008); +#314008 = FILL_AREA_STYLE('',(#314009)); +#314009 = FILL_AREA_STYLE_COLOUR('',#282540); +#314010 = OVER_RIDING_STYLED_ITEM('overriding color',(#314011),#62371, + #313616); +#314011 = PRESENTATION_STYLE_ASSIGNMENT((#314012)); +#314012 = SURFACE_STYLE_USAGE(.BOTH.,#314013); +#314013 = SURFACE_SIDE_STYLE('',(#314014)); +#314014 = SURFACE_STYLE_FILL_AREA(#314015); +#314015 = FILL_AREA_STYLE('',(#314016)); +#314016 = FILL_AREA_STYLE_COLOUR('',#282540); +#314017 = OVER_RIDING_STYLED_ITEM('overriding color',(#314018),#62421, + #313616); +#314018 = PRESENTATION_STYLE_ASSIGNMENT((#314019)); +#314019 = SURFACE_STYLE_USAGE(.BOTH.,#314020); +#314020 = SURFACE_SIDE_STYLE('',(#314021)); +#314021 = SURFACE_STYLE_FILL_AREA(#314022); +#314022 = FILL_AREA_STYLE('',(#314023)); +#314023 = FILL_AREA_STYLE_COLOUR('',#282540); +#314024 = OVER_RIDING_STYLED_ITEM('overriding color',(#314025),#62452, + #313616); +#314025 = PRESENTATION_STYLE_ASSIGNMENT((#314026)); +#314026 = SURFACE_STYLE_USAGE(.BOTH.,#314027); +#314027 = SURFACE_SIDE_STYLE('',(#314028)); +#314028 = SURFACE_STYLE_FILL_AREA(#314029); +#314029 = FILL_AREA_STYLE('',(#314030)); +#314030 = FILL_AREA_STYLE_COLOUR('',#282540); +#314031 = OVER_RIDING_STYLED_ITEM('overriding color',(#314032),#62483, + #313616); +#314032 = PRESENTATION_STYLE_ASSIGNMENT((#314033)); +#314033 = SURFACE_STYLE_USAGE(.BOTH.,#314034); +#314034 = SURFACE_SIDE_STYLE('',(#314035)); +#314035 = SURFACE_STYLE_FILL_AREA(#314036); +#314036 = FILL_AREA_STYLE('',(#314037)); +#314037 = FILL_AREA_STYLE_COLOUR('',#282540); +#314038 = OVER_RIDING_STYLED_ITEM('overriding color',(#314039),#62533, + #313616); +#314039 = PRESENTATION_STYLE_ASSIGNMENT((#314040)); +#314040 = SURFACE_STYLE_USAGE(.BOTH.,#314041); +#314041 = SURFACE_SIDE_STYLE('',(#314042)); +#314042 = SURFACE_STYLE_FILL_AREA(#314043); +#314043 = FILL_AREA_STYLE('',(#314044)); +#314044 = FILL_AREA_STYLE_COLOUR('',#282540); +#314045 = OVER_RIDING_STYLED_ITEM('overriding color',(#314046),#62583, + #313616); +#314046 = PRESENTATION_STYLE_ASSIGNMENT((#314047)); +#314047 = SURFACE_STYLE_USAGE(.BOTH.,#314048); +#314048 = SURFACE_SIDE_STYLE('',(#314049)); +#314049 = SURFACE_STYLE_FILL_AREA(#314050); +#314050 = FILL_AREA_STYLE('',(#314051)); +#314051 = FILL_AREA_STYLE_COLOUR('',#282540); +#314052 = OVER_RIDING_STYLED_ITEM('overriding color',(#314053),#62602, + #313616); +#314053 = PRESENTATION_STYLE_ASSIGNMENT((#314054)); +#314054 = SURFACE_STYLE_USAGE(.BOTH.,#314055); +#314055 = SURFACE_SIDE_STYLE('',(#314056)); +#314056 = SURFACE_STYLE_FILL_AREA(#314057); +#314057 = FILL_AREA_STYLE('',(#314058)); +#314058 = FILL_AREA_STYLE_COLOUR('',#282540); +#314059 = OVER_RIDING_STYLED_ITEM('overriding color',(#314060),#62619, + #313616); +#314060 = PRESENTATION_STYLE_ASSIGNMENT((#314061)); +#314061 = SURFACE_STYLE_USAGE(.BOTH.,#314062); +#314062 = SURFACE_SIDE_STYLE('',(#314063)); +#314063 = SURFACE_STYLE_FILL_AREA(#314064); +#314064 = FILL_AREA_STYLE('',(#314065)); +#314065 = FILL_AREA_STYLE_COLOUR('',#282540); +#314066 = OVER_RIDING_STYLED_ITEM('overriding color',(#314067),#62644, + #313616); +#314067 = PRESENTATION_STYLE_ASSIGNMENT((#314068)); +#314068 = SURFACE_STYLE_USAGE(.BOTH.,#314069); +#314069 = SURFACE_SIDE_STYLE('',(#314070)); +#314070 = SURFACE_STYLE_FILL_AREA(#314071); +#314071 = FILL_AREA_STYLE('',(#314072)); +#314072 = FILL_AREA_STYLE_COLOUR('',#282540); +#314073 = OVER_RIDING_STYLED_ITEM('overriding color',(#314074),#62669, + #313616); +#314074 = PRESENTATION_STYLE_ASSIGNMENT((#314075)); +#314075 = SURFACE_STYLE_USAGE(.BOTH.,#314076); +#314076 = SURFACE_SIDE_STYLE('',(#314077)); +#314077 = SURFACE_STYLE_FILL_AREA(#314078); +#314078 = FILL_AREA_STYLE('',(#314079)); +#314079 = FILL_AREA_STYLE_COLOUR('',#282540); +#314080 = OVER_RIDING_STYLED_ITEM('overriding color',(#314081),#62718, + #313616); +#314081 = PRESENTATION_STYLE_ASSIGNMENT((#314082)); +#314082 = SURFACE_STYLE_USAGE(.BOTH.,#314083); +#314083 = SURFACE_SIDE_STYLE('',(#314084)); +#314084 = SURFACE_STYLE_FILL_AREA(#314085); +#314085 = FILL_AREA_STYLE('',(#314086)); +#314086 = FILL_AREA_STYLE_COLOUR('',#282540); +#314087 = OVER_RIDING_STYLED_ITEM('overriding color',(#314088),#62735, + #313616); +#314088 = PRESENTATION_STYLE_ASSIGNMENT((#314089)); +#314089 = SURFACE_STYLE_USAGE(.BOTH.,#314090); +#314090 = SURFACE_SIDE_STYLE('',(#314091)); +#314091 = SURFACE_STYLE_FILL_AREA(#314092); +#314092 = FILL_AREA_STYLE('',(#314093)); +#314093 = FILL_AREA_STYLE_COLOUR('',#282540); +#314094 = OVER_RIDING_STYLED_ITEM('overriding color',(#314095),#62759, + #313616); +#314095 = PRESENTATION_STYLE_ASSIGNMENT((#314096)); +#314096 = SURFACE_STYLE_USAGE(.BOTH.,#314097); +#314097 = SURFACE_SIDE_STYLE('',(#314098)); +#314098 = SURFACE_STYLE_FILL_AREA(#314099); +#314099 = FILL_AREA_STYLE('',(#314100)); +#314100 = FILL_AREA_STYLE_COLOUR('',#282540); +#314101 = OVER_RIDING_STYLED_ITEM('overriding color',(#314102),#62776, + #313616); +#314102 = PRESENTATION_STYLE_ASSIGNMENT((#314103)); +#314103 = SURFACE_STYLE_USAGE(.BOTH.,#314104); +#314104 = SURFACE_SIDE_STYLE('',(#314105)); +#314105 = SURFACE_STYLE_FILL_AREA(#314106); +#314106 = FILL_AREA_STYLE('',(#314107)); +#314107 = FILL_AREA_STYLE_COLOUR('',#282540); +#314108 = OVER_RIDING_STYLED_ITEM('overriding color',(#314109),#62800, + #313616); +#314109 = PRESENTATION_STYLE_ASSIGNMENT((#314110)); +#314110 = SURFACE_STYLE_USAGE(.BOTH.,#314111); +#314111 = SURFACE_SIDE_STYLE('',(#314112)); +#314112 = SURFACE_STYLE_FILL_AREA(#314113); +#314113 = FILL_AREA_STYLE('',(#314114)); +#314114 = FILL_AREA_STYLE_COLOUR('',#282540); +#314115 = OVER_RIDING_STYLED_ITEM('overriding color',(#314116),#62825, + #313616); +#314116 = PRESENTATION_STYLE_ASSIGNMENT((#314117)); +#314117 = SURFACE_STYLE_USAGE(.BOTH.,#314118); +#314118 = SURFACE_SIDE_STYLE('',(#314119)); +#314119 = SURFACE_STYLE_FILL_AREA(#314120); +#314120 = FILL_AREA_STYLE('',(#314121)); +#314121 = FILL_AREA_STYLE_COLOUR('',#282540); +#314122 = OVER_RIDING_STYLED_ITEM('overriding color',(#314123),#62849, + #313616); +#314123 = PRESENTATION_STYLE_ASSIGNMENT((#314124)); +#314124 = SURFACE_STYLE_USAGE(.BOTH.,#314125); +#314125 = SURFACE_SIDE_STYLE('',(#314126)); +#314126 = SURFACE_STYLE_FILL_AREA(#314127); +#314127 = FILL_AREA_STYLE('',(#314128)); +#314128 = FILL_AREA_STYLE_COLOUR('',#282540); +#314129 = OVER_RIDING_STYLED_ITEM('overriding color',(#314130),#62867, + #313616); +#314130 = PRESENTATION_STYLE_ASSIGNMENT((#314131)); +#314131 = SURFACE_STYLE_USAGE(.BOTH.,#314132); +#314132 = SURFACE_SIDE_STYLE('',(#314133)); +#314133 = SURFACE_STYLE_FILL_AREA(#314134); +#314134 = FILL_AREA_STYLE('',(#314135)); +#314135 = FILL_AREA_STYLE_COLOUR('',#282540); +#314136 = OVER_RIDING_STYLED_ITEM('overriding color',(#314137),#62889, + #313616); +#314137 = PRESENTATION_STYLE_ASSIGNMENT((#314138)); +#314138 = SURFACE_STYLE_USAGE(.BOTH.,#314139); +#314139 = SURFACE_SIDE_STYLE('',(#314140)); +#314140 = SURFACE_STYLE_FILL_AREA(#314141); +#314141 = FILL_AREA_STYLE('',(#314142)); +#314142 = FILL_AREA_STYLE_COLOUR('',#282540); +#314143 = OVER_RIDING_STYLED_ITEM('overriding color',(#314144),#62901, + #313616); +#314144 = PRESENTATION_STYLE_ASSIGNMENT((#314145)); +#314145 = SURFACE_STYLE_USAGE(.BOTH.,#314146); +#314146 = SURFACE_SIDE_STYLE('',(#314147)); +#314147 = SURFACE_STYLE_FILL_AREA(#314148); +#314148 = FILL_AREA_STYLE('',(#314149)); +#314149 = FILL_AREA_STYLE_COLOUR('',#282540); +#314150 = OVER_RIDING_STYLED_ITEM('overriding color',(#314151),#62913, + #313616); +#314151 = PRESENTATION_STYLE_ASSIGNMENT((#314152)); +#314152 = SURFACE_STYLE_USAGE(.BOTH.,#314153); +#314153 = SURFACE_SIDE_STYLE('',(#314154)); +#314154 = SURFACE_STYLE_FILL_AREA(#314155); +#314155 = FILL_AREA_STYLE('',(#314156)); +#314156 = FILL_AREA_STYLE_COLOUR('',#282540); +#314157 = OVER_RIDING_STYLED_ITEM('overriding color',(#314158),#62935, + #313616); +#314158 = PRESENTATION_STYLE_ASSIGNMENT((#314159)); +#314159 = SURFACE_STYLE_USAGE(.BOTH.,#314160); +#314160 = SURFACE_SIDE_STYLE('',(#314161)); +#314161 = SURFACE_STYLE_FILL_AREA(#314162); +#314162 = FILL_AREA_STYLE('',(#314163)); +#314163 = FILL_AREA_STYLE_COLOUR('',#282540); +#314164 = OVER_RIDING_STYLED_ITEM('overriding color',(#314165),#62947, + #313616); +#314165 = PRESENTATION_STYLE_ASSIGNMENT((#314166)); +#314166 = SURFACE_STYLE_USAGE(.BOTH.,#314167); +#314167 = SURFACE_SIDE_STYLE('',(#314168)); +#314168 = SURFACE_STYLE_FILL_AREA(#314169); +#314169 = FILL_AREA_STYLE('',(#314170)); +#314170 = FILL_AREA_STYLE_COLOUR('',#282540); +#314171 = OVER_RIDING_STYLED_ITEM('overriding color',(#314172),#63048, + #313616); +#314172 = PRESENTATION_STYLE_ASSIGNMENT((#314173)); +#314173 = SURFACE_STYLE_USAGE(.BOTH.,#314174); +#314174 = SURFACE_SIDE_STYLE('',(#314175)); +#314175 = SURFACE_STYLE_FILL_AREA(#314176); +#314176 = FILL_AREA_STYLE('',(#314177)); +#314177 = FILL_AREA_STYLE_COLOUR('',#282540); +#314178 = OVER_RIDING_STYLED_ITEM('overriding color',(#314179),#63079, + #313616); +#314179 = PRESENTATION_STYLE_ASSIGNMENT((#314180)); +#314180 = SURFACE_STYLE_USAGE(.BOTH.,#314181); +#314181 = SURFACE_SIDE_STYLE('',(#314182)); +#314182 = SURFACE_STYLE_FILL_AREA(#314183); +#314183 = FILL_AREA_STYLE('',(#314184)); +#314184 = FILL_AREA_STYLE_COLOUR('',#282540); +#314185 = OVER_RIDING_STYLED_ITEM('overriding color',(#314186),#63180, + #313616); +#314186 = PRESENTATION_STYLE_ASSIGNMENT((#314187)); +#314187 = SURFACE_STYLE_USAGE(.BOTH.,#314188); +#314188 = SURFACE_SIDE_STYLE('',(#314189)); +#314189 = SURFACE_STYLE_FILL_AREA(#314190); +#314190 = FILL_AREA_STYLE('',(#314191)); +#314191 = FILL_AREA_STYLE_COLOUR('',#282540); +#314192 = OVER_RIDING_STYLED_ITEM('overriding color',(#314193),#63192, + #313616); +#314193 = PRESENTATION_STYLE_ASSIGNMENT((#314194)); +#314194 = SURFACE_STYLE_USAGE(.BOTH.,#314195); +#314195 = SURFACE_SIDE_STYLE('',(#314196)); +#314196 = SURFACE_STYLE_FILL_AREA(#314197); +#314197 = FILL_AREA_STYLE('',(#314198)); +#314198 = FILL_AREA_STYLE_COLOUR('',#282540); +#314199 = OVER_RIDING_STYLED_ITEM('overriding color',(#314200),#63223, + #313616); +#314200 = PRESENTATION_STYLE_ASSIGNMENT((#314201)); +#314201 = SURFACE_STYLE_USAGE(.BOTH.,#314202); +#314202 = SURFACE_SIDE_STYLE('',(#314203)); +#314203 = SURFACE_STYLE_FILL_AREA(#314204); +#314204 = FILL_AREA_STYLE('',(#314205)); +#314205 = FILL_AREA_STYLE_COLOUR('',#282540); +#314206 = OVER_RIDING_STYLED_ITEM('overriding color',(#314207),#63281, + #313616); +#314207 = PRESENTATION_STYLE_ASSIGNMENT((#314208)); +#314208 = SURFACE_STYLE_USAGE(.BOTH.,#314209); +#314209 = SURFACE_SIDE_STYLE('',(#314210)); +#314210 = SURFACE_STYLE_FILL_AREA(#314211); +#314211 = FILL_AREA_STYLE('',(#314212)); +#314212 = FILL_AREA_STYLE_COLOUR('',#282540); +#314213 = OVER_RIDING_STYLED_ITEM('overriding color',(#314214),#63316, + #313616); +#314214 = PRESENTATION_STYLE_ASSIGNMENT((#314215)); +#314215 = SURFACE_STYLE_USAGE(.BOTH.,#314216); +#314216 = SURFACE_SIDE_STYLE('',(#314217)); +#314217 = SURFACE_STYLE_FILL_AREA(#314218); +#314218 = FILL_AREA_STYLE('',(#314219)); +#314219 = FILL_AREA_STYLE_COLOUR('',#282540); +#314220 = OVER_RIDING_STYLED_ITEM('overriding color',(#314221),#63333, + #313616); +#314221 = PRESENTATION_STYLE_ASSIGNMENT((#314222)); +#314222 = SURFACE_STYLE_USAGE(.BOTH.,#314223); +#314223 = SURFACE_SIDE_STYLE('',(#314224)); +#314224 = SURFACE_STYLE_FILL_AREA(#314225); +#314225 = FILL_AREA_STYLE('',(#314226)); +#314226 = FILL_AREA_STYLE_COLOUR('',#282540); +#314227 = OVER_RIDING_STYLED_ITEM('overriding color',(#314228),#63350, + #313616); +#314228 = PRESENTATION_STYLE_ASSIGNMENT((#314229)); +#314229 = SURFACE_STYLE_USAGE(.BOTH.,#314230); +#314230 = SURFACE_SIDE_STYLE('',(#314231)); +#314231 = SURFACE_STYLE_FILL_AREA(#314232); +#314232 = FILL_AREA_STYLE('',(#314233)); +#314233 = FILL_AREA_STYLE_COLOUR('',#282540); +#314234 = OVER_RIDING_STYLED_ITEM('overriding color',(#314235),#63379, + #313616); +#314235 = PRESENTATION_STYLE_ASSIGNMENT((#314236)); +#314236 = SURFACE_STYLE_USAGE(.BOTH.,#314237); +#314237 = SURFACE_SIDE_STYLE('',(#314238)); +#314238 = SURFACE_STYLE_FILL_AREA(#314239); +#314239 = FILL_AREA_STYLE('',(#314240)); +#314240 = FILL_AREA_STYLE_COLOUR('',#282540); +#314241 = OVER_RIDING_STYLED_ITEM('overriding color',(#314242),#63408, + #313616); +#314242 = PRESENTATION_STYLE_ASSIGNMENT((#314243)); +#314243 = SURFACE_STYLE_USAGE(.BOTH.,#314244); +#314244 = SURFACE_SIDE_STYLE('',(#314245)); +#314245 = SURFACE_STYLE_FILL_AREA(#314246); +#314246 = FILL_AREA_STYLE('',(#314247)); +#314247 = FILL_AREA_STYLE_COLOUR('',#282540); +#314248 = OVER_RIDING_STYLED_ITEM('overriding color',(#314249),#63425, + #313616); +#314249 = PRESENTATION_STYLE_ASSIGNMENT((#314250)); +#314250 = SURFACE_STYLE_USAGE(.BOTH.,#314251); +#314251 = SURFACE_SIDE_STYLE('',(#314252)); +#314252 = SURFACE_STYLE_FILL_AREA(#314253); +#314253 = FILL_AREA_STYLE('',(#314254)); +#314254 = FILL_AREA_STYLE_COLOUR('',#282540); +#314255 = OVER_RIDING_STYLED_ITEM('overriding color',(#314256),#63442, + #313616); +#314256 = PRESENTATION_STYLE_ASSIGNMENT((#314257)); +#314257 = SURFACE_STYLE_USAGE(.BOTH.,#314258); +#314258 = SURFACE_SIDE_STYLE('',(#314259)); +#314259 = SURFACE_STYLE_FILL_AREA(#314260); +#314260 = FILL_AREA_STYLE('',(#314261)); +#314261 = FILL_AREA_STYLE_COLOUR('',#282540); +#314262 = OVER_RIDING_STYLED_ITEM('overriding color',(#314263),#63465, + #313616); +#314263 = PRESENTATION_STYLE_ASSIGNMENT((#314264)); +#314264 = SURFACE_STYLE_USAGE(.BOTH.,#314265); +#314265 = SURFACE_SIDE_STYLE('',(#314266)); +#314266 = SURFACE_STYLE_FILL_AREA(#314267); +#314267 = FILL_AREA_STYLE('',(#314268)); +#314268 = FILL_AREA_STYLE_COLOUR('',#282540); +#314269 = OVER_RIDING_STYLED_ITEM('overriding color',(#314270),#63489, + #313616); +#314270 = PRESENTATION_STYLE_ASSIGNMENT((#314271)); +#314271 = SURFACE_STYLE_USAGE(.BOTH.,#314272); +#314272 = SURFACE_SIDE_STYLE('',(#314273)); +#314273 = SURFACE_STYLE_FILL_AREA(#314274); +#314274 = FILL_AREA_STYLE('',(#314275)); +#314275 = FILL_AREA_STYLE_COLOUR('',#282540); +#314276 = OVER_RIDING_STYLED_ITEM('overriding color',(#314277),#63513, + #313616); +#314277 = PRESENTATION_STYLE_ASSIGNMENT((#314278)); +#314278 = SURFACE_STYLE_USAGE(.BOTH.,#314279); +#314279 = SURFACE_SIDE_STYLE('',(#314280)); +#314280 = SURFACE_STYLE_FILL_AREA(#314281); +#314281 = FILL_AREA_STYLE('',(#314282)); +#314282 = FILL_AREA_STYLE_COLOUR('',#282540); +#314283 = OVER_RIDING_STYLED_ITEM('overriding color',(#314284),#63538, + #313616); +#314284 = PRESENTATION_STYLE_ASSIGNMENT((#314285)); +#314285 = SURFACE_STYLE_USAGE(.BOTH.,#314286); +#314286 = SURFACE_SIDE_STYLE('',(#314287)); +#314287 = SURFACE_STYLE_FILL_AREA(#314288); +#314288 = FILL_AREA_STYLE('',(#314289)); +#314289 = FILL_AREA_STYLE_COLOUR('',#282540); +#314290 = OVER_RIDING_STYLED_ITEM('overriding color',(#314291),#63562, + #313616); +#314291 = PRESENTATION_STYLE_ASSIGNMENT((#314292)); +#314292 = SURFACE_STYLE_USAGE(.BOTH.,#314293); +#314293 = SURFACE_SIDE_STYLE('',(#314294)); +#314294 = SURFACE_STYLE_FILL_AREA(#314295); +#314295 = FILL_AREA_STYLE('',(#314296)); +#314296 = FILL_AREA_STYLE_COLOUR('',#282540); +#314297 = OVER_RIDING_STYLED_ITEM('overriding color',(#314298),#63580, + #313616); +#314298 = PRESENTATION_STYLE_ASSIGNMENT((#314299)); +#314299 = SURFACE_STYLE_USAGE(.BOTH.,#314300); +#314300 = SURFACE_SIDE_STYLE('',(#314301)); +#314301 = SURFACE_STYLE_FILL_AREA(#314302); +#314302 = FILL_AREA_STYLE('',(#314303)); +#314303 = FILL_AREA_STYLE_COLOUR('',#282540); +#314304 = OVER_RIDING_STYLED_ITEM('overriding color',(#314305),#63594, + #313616); +#314305 = PRESENTATION_STYLE_ASSIGNMENT((#314306)); +#314306 = SURFACE_STYLE_USAGE(.BOTH.,#314307); +#314307 = SURFACE_SIDE_STYLE('',(#314308)); +#314308 = SURFACE_STYLE_FILL_AREA(#314309); +#314309 = FILL_AREA_STYLE('',(#314310)); +#314310 = FILL_AREA_STYLE_COLOUR('',#282540); +#314311 = OVER_RIDING_STYLED_ITEM('overriding color',(#314312),#63608, + #313616); +#314312 = PRESENTATION_STYLE_ASSIGNMENT((#314313)); +#314313 = SURFACE_STYLE_USAGE(.BOTH.,#314314); +#314314 = SURFACE_SIDE_STYLE('',(#314315)); +#314315 = SURFACE_STYLE_FILL_AREA(#314316); +#314316 = FILL_AREA_STYLE('',(#314317)); +#314317 = FILL_AREA_STYLE_COLOUR('',#282540); +#314318 = OVER_RIDING_STYLED_ITEM('overriding color',(#314319),#63630, + #313616); +#314319 = PRESENTATION_STYLE_ASSIGNMENT((#314320)); +#314320 = SURFACE_STYLE_USAGE(.BOTH.,#314321); +#314321 = SURFACE_SIDE_STYLE('',(#314322)); +#314322 = SURFACE_STYLE_FILL_AREA(#314323); +#314323 = FILL_AREA_STYLE('',(#314324)); +#314324 = FILL_AREA_STYLE_COLOUR('',#282540); +#314325 = OVER_RIDING_STYLED_ITEM('overriding color',(#314326),#63647, + #313616); +#314326 = PRESENTATION_STYLE_ASSIGNMENT((#314327)); +#314327 = SURFACE_STYLE_USAGE(.BOTH.,#314328); +#314328 = SURFACE_SIDE_STYLE('',(#314329)); +#314329 = SURFACE_STYLE_FILL_AREA(#314330); +#314330 = FILL_AREA_STYLE('',(#314331)); +#314331 = FILL_AREA_STYLE_COLOUR('',#282540); +#314332 = OVER_RIDING_STYLED_ITEM('overriding color',(#314333),#63671, + #313616); +#314333 = PRESENTATION_STYLE_ASSIGNMENT((#314334)); +#314334 = SURFACE_STYLE_USAGE(.BOTH.,#314335); +#314335 = SURFACE_SIDE_STYLE('',(#314336)); +#314336 = SURFACE_STYLE_FILL_AREA(#314337); +#314337 = FILL_AREA_STYLE('',(#314338)); +#314338 = FILL_AREA_STYLE_COLOUR('',#282540); +#314339 = OVER_RIDING_STYLED_ITEM('overriding color',(#314340),#63688, + #313616); +#314340 = PRESENTATION_STYLE_ASSIGNMENT((#314341)); +#314341 = SURFACE_STYLE_USAGE(.BOTH.,#314342); +#314342 = SURFACE_SIDE_STYLE('',(#314343)); +#314343 = SURFACE_STYLE_FILL_AREA(#314344); +#314344 = FILL_AREA_STYLE('',(#314345)); +#314345 = FILL_AREA_STYLE_COLOUR('',#282540); +#314346 = OVER_RIDING_STYLED_ITEM('overriding color',(#314347),#63705, + #313616); +#314347 = PRESENTATION_STYLE_ASSIGNMENT((#314348)); +#314348 = SURFACE_STYLE_USAGE(.BOTH.,#314349); +#314349 = SURFACE_SIDE_STYLE('',(#314350)); +#314350 = SURFACE_STYLE_FILL_AREA(#314351); +#314351 = FILL_AREA_STYLE('',(#314352)); +#314352 = FILL_AREA_STYLE_COLOUR('',#282540); +#314353 = OVER_RIDING_STYLED_ITEM('overriding color',(#314354),#63722, + #313616); +#314354 = PRESENTATION_STYLE_ASSIGNMENT((#314355)); +#314355 = SURFACE_STYLE_USAGE(.BOTH.,#314356); +#314356 = SURFACE_SIDE_STYLE('',(#314357)); +#314357 = SURFACE_STYLE_FILL_AREA(#314358); +#314358 = FILL_AREA_STYLE('',(#314359)); +#314359 = FILL_AREA_STYLE_COLOUR('',#282540); +#314360 = OVER_RIDING_STYLED_ITEM('overriding color',(#314361),#63739, + #313616); +#314361 = PRESENTATION_STYLE_ASSIGNMENT((#314362)); +#314362 = SURFACE_STYLE_USAGE(.BOTH.,#314363); +#314363 = SURFACE_SIDE_STYLE('',(#314364)); +#314364 = SURFACE_STYLE_FILL_AREA(#314365); +#314365 = FILL_AREA_STYLE('',(#314366)); +#314366 = FILL_AREA_STYLE_COLOUR('',#282540); +#314367 = OVER_RIDING_STYLED_ITEM('overriding color',(#314368),#63763, + #313616); +#314368 = PRESENTATION_STYLE_ASSIGNMENT((#314369)); +#314369 = SURFACE_STYLE_USAGE(.BOTH.,#314370); +#314370 = SURFACE_SIDE_STYLE('',(#314371)); +#314371 = SURFACE_STYLE_FILL_AREA(#314372); +#314372 = FILL_AREA_STYLE('',(#314373)); +#314373 = FILL_AREA_STYLE_COLOUR('',#282540); +#314374 = OVER_RIDING_STYLED_ITEM('overriding color',(#314375),#63780, + #313616); +#314375 = PRESENTATION_STYLE_ASSIGNMENT((#314376)); +#314376 = SURFACE_STYLE_USAGE(.BOTH.,#314377); +#314377 = SURFACE_SIDE_STYLE('',(#314378)); +#314378 = SURFACE_STYLE_FILL_AREA(#314379); +#314379 = FILL_AREA_STYLE('',(#314380)); +#314380 = FILL_AREA_STYLE_COLOUR('',#282540); +#314381 = OVER_RIDING_STYLED_ITEM('overriding color',(#314382),#63802, + #313616); +#314382 = PRESENTATION_STYLE_ASSIGNMENT((#314383)); +#314383 = SURFACE_STYLE_USAGE(.BOTH.,#314384); +#314384 = SURFACE_SIDE_STYLE('',(#314385)); +#314385 = SURFACE_STYLE_FILL_AREA(#314386); +#314386 = FILL_AREA_STYLE('',(#314387)); +#314387 = FILL_AREA_STYLE_COLOUR('',#282540); +#314388 = OVER_RIDING_STYLED_ITEM('overriding color',(#314389),#63814, + #313616); +#314389 = PRESENTATION_STYLE_ASSIGNMENT((#314390)); +#314390 = SURFACE_STYLE_USAGE(.BOTH.,#314391); +#314391 = SURFACE_SIDE_STYLE('',(#314392)); +#314392 = SURFACE_STYLE_FILL_AREA(#314393); +#314393 = FILL_AREA_STYLE('',(#314394)); +#314394 = FILL_AREA_STYLE_COLOUR('',#282540); +#314395 = OVER_RIDING_STYLED_ITEM('overriding color',(#314396),#63847, + #313616); +#314396 = PRESENTATION_STYLE_ASSIGNMENT((#314397)); +#314397 = SURFACE_STYLE_USAGE(.BOTH.,#314398); +#314398 = SURFACE_SIDE_STYLE('',(#314399)); +#314399 = SURFACE_STYLE_FILL_AREA(#314400); +#314400 = FILL_AREA_STYLE('',(#314401)); +#314401 = FILL_AREA_STYLE_COLOUR('',#282540); +#314402 = OVER_RIDING_STYLED_ITEM('overriding color',(#314403),#63871, + #313616); +#314403 = PRESENTATION_STYLE_ASSIGNMENT((#314404)); +#314404 = SURFACE_STYLE_USAGE(.BOTH.,#314405); +#314405 = SURFACE_SIDE_STYLE('',(#314406)); +#314406 = SURFACE_STYLE_FILL_AREA(#314407); +#314407 = FILL_AREA_STYLE('',(#314408)); +#314408 = FILL_AREA_STYLE_COLOUR('',#282540); +#314409 = OVER_RIDING_STYLED_ITEM('overriding color',(#314410),#63895, + #313616); +#314410 = PRESENTATION_STYLE_ASSIGNMENT((#314411)); +#314411 = SURFACE_STYLE_USAGE(.BOTH.,#314412); +#314412 = SURFACE_SIDE_STYLE('',(#314413)); +#314413 = SURFACE_STYLE_FILL_AREA(#314414); +#314414 = FILL_AREA_STYLE('',(#314415)); +#314415 = FILL_AREA_STYLE_COLOUR('',#282540); +#314416 = OVER_RIDING_STYLED_ITEM('overriding color',(#314417),#63928, + #313616); +#314417 = PRESENTATION_STYLE_ASSIGNMENT((#314418)); +#314418 = SURFACE_STYLE_USAGE(.BOTH.,#314419); +#314419 = SURFACE_SIDE_STYLE('',(#314420)); +#314420 = SURFACE_STYLE_FILL_AREA(#314421); +#314421 = FILL_AREA_STYLE('',(#314422)); +#314422 = FILL_AREA_STYLE_COLOUR('',#282540); +#314423 = OVER_RIDING_STYLED_ITEM('overriding color',(#314424),#63945, + #313616); +#314424 = PRESENTATION_STYLE_ASSIGNMENT((#314425)); +#314425 = SURFACE_STYLE_USAGE(.BOTH.,#314426); +#314426 = SURFACE_SIDE_STYLE('',(#314427)); +#314427 = SURFACE_STYLE_FILL_AREA(#314428); +#314428 = FILL_AREA_STYLE('',(#314429)); +#314429 = FILL_AREA_STYLE_COLOUR('',#282540); +#314430 = OVER_RIDING_STYLED_ITEM('overriding color',(#314431),#63970, + #313616); +#314431 = PRESENTATION_STYLE_ASSIGNMENT((#314432)); +#314432 = SURFACE_STYLE_USAGE(.BOTH.,#314433); +#314433 = SURFACE_SIDE_STYLE('',(#314434)); +#314434 = SURFACE_STYLE_FILL_AREA(#314435); +#314435 = FILL_AREA_STYLE('',(#314436)); +#314436 = FILL_AREA_STYLE_COLOUR('',#282540); +#314437 = OVER_RIDING_STYLED_ITEM('overriding color',(#314438),#63987, + #313616); +#314438 = PRESENTATION_STYLE_ASSIGNMENT((#314439)); +#314439 = SURFACE_STYLE_USAGE(.BOTH.,#314440); +#314440 = SURFACE_SIDE_STYLE('',(#314441)); +#314441 = SURFACE_STYLE_FILL_AREA(#314442); +#314442 = FILL_AREA_STYLE('',(#314443)); +#314443 = FILL_AREA_STYLE_COLOUR('',#282540); +#314444 = OVER_RIDING_STYLED_ITEM('overriding color',(#314445),#64012, + #313616); +#314445 = PRESENTATION_STYLE_ASSIGNMENT((#314446)); +#314446 = SURFACE_STYLE_USAGE(.BOTH.,#314447); +#314447 = SURFACE_SIDE_STYLE('',(#314448)); +#314448 = SURFACE_STYLE_FILL_AREA(#314449); +#314449 = FILL_AREA_STYLE('',(#314450)); +#314450 = FILL_AREA_STYLE_COLOUR('',#282540); +#314451 = OVER_RIDING_STYLED_ITEM('overriding color',(#314452),#64043, + #313616); +#314452 = PRESENTATION_STYLE_ASSIGNMENT((#314453)); +#314453 = SURFACE_STYLE_USAGE(.BOTH.,#314454); +#314454 = SURFACE_SIDE_STYLE('',(#314455)); +#314455 = SURFACE_STYLE_FILL_AREA(#314456); +#314456 = FILL_AREA_STYLE('',(#314457)); +#314457 = FILL_AREA_STYLE_COLOUR('',#282540); +#314458 = OVER_RIDING_STYLED_ITEM('overriding color',(#314459),#64068, + #313616); +#314459 = PRESENTATION_STYLE_ASSIGNMENT((#314460)); +#314460 = SURFACE_STYLE_USAGE(.BOTH.,#314461); +#314461 = SURFACE_SIDE_STYLE('',(#314462)); +#314462 = SURFACE_STYLE_FILL_AREA(#314463); +#314463 = FILL_AREA_STYLE('',(#314464)); +#314464 = FILL_AREA_STYLE_COLOUR('',#282540); +#314465 = OVER_RIDING_STYLED_ITEM('overriding color',(#314466),#64093, + #313616); +#314466 = PRESENTATION_STYLE_ASSIGNMENT((#314467)); +#314467 = SURFACE_STYLE_USAGE(.BOTH.,#314468); +#314468 = SURFACE_SIDE_STYLE('',(#314469)); +#314469 = SURFACE_STYLE_FILL_AREA(#314470); +#314470 = FILL_AREA_STYLE('',(#314471)); +#314471 = FILL_AREA_STYLE_COLOUR('',#282540); +#314472 = OVER_RIDING_STYLED_ITEM('overriding color',(#314473),#64124, + #313616); +#314473 = PRESENTATION_STYLE_ASSIGNMENT((#314474)); +#314474 = SURFACE_STYLE_USAGE(.BOTH.,#314475); +#314475 = SURFACE_SIDE_STYLE('',(#314476)); +#314476 = SURFACE_STYLE_FILL_AREA(#314477); +#314477 = FILL_AREA_STYLE('',(#314478)); +#314478 = FILL_AREA_STYLE_COLOUR('',#282540); +#314479 = OVER_RIDING_STYLED_ITEM('overriding color',(#314480),#64141, + #313616); +#314480 = PRESENTATION_STYLE_ASSIGNMENT((#314481)); +#314481 = SURFACE_STYLE_USAGE(.BOTH.,#314482); +#314482 = SURFACE_SIDE_STYLE('',(#314483)); +#314483 = SURFACE_STYLE_FILL_AREA(#314484); +#314484 = FILL_AREA_STYLE('',(#314485)); +#314485 = FILL_AREA_STYLE_COLOUR('',#282540); +#314486 = OVER_RIDING_STYLED_ITEM('overriding color',(#314487),#64183, + #313616); +#314487 = PRESENTATION_STYLE_ASSIGNMENT((#314488)); +#314488 = SURFACE_STYLE_USAGE(.BOTH.,#314489); +#314489 = SURFACE_SIDE_STYLE('',(#314490)); +#314490 = SURFACE_STYLE_FILL_AREA(#314491); +#314491 = FILL_AREA_STYLE('',(#314492)); +#314492 = FILL_AREA_STYLE_COLOUR('',#282540); +#314493 = OVER_RIDING_STYLED_ITEM('overriding color',(#314494),#64200, + #313616); +#314494 = PRESENTATION_STYLE_ASSIGNMENT((#314495)); +#314495 = SURFACE_STYLE_USAGE(.BOTH.,#314496); +#314496 = SURFACE_SIDE_STYLE('',(#314497)); +#314497 = SURFACE_STYLE_FILL_AREA(#314498); +#314498 = FILL_AREA_STYLE('',(#314499)); +#314499 = FILL_AREA_STYLE_COLOUR('',#282540); +#314500 = OVER_RIDING_STYLED_ITEM('overriding color',(#314501),#64242, + #313616); +#314501 = PRESENTATION_STYLE_ASSIGNMENT((#314502)); +#314502 = SURFACE_STYLE_USAGE(.BOTH.,#314503); +#314503 = SURFACE_SIDE_STYLE('',(#314504)); +#314504 = SURFACE_STYLE_FILL_AREA(#314505); +#314505 = FILL_AREA_STYLE('',(#314506)); +#314506 = FILL_AREA_STYLE_COLOUR('',#282540); +#314507 = OVER_RIDING_STYLED_ITEM('overriding color',(#314508),#64267, + #313616); +#314508 = PRESENTATION_STYLE_ASSIGNMENT((#314509)); +#314509 = SURFACE_STYLE_USAGE(.BOTH.,#314510); +#314510 = SURFACE_SIDE_STYLE('',(#314511)); +#314511 = SURFACE_STYLE_FILL_AREA(#314512); +#314512 = FILL_AREA_STYLE('',(#314513)); +#314513 = FILL_AREA_STYLE_COLOUR('',#282540); +#314514 = OVER_RIDING_STYLED_ITEM('overriding color',(#314515),#64301, + #313616); +#314515 = PRESENTATION_STYLE_ASSIGNMENT((#314516)); +#314516 = SURFACE_STYLE_USAGE(.BOTH.,#314517); +#314517 = SURFACE_SIDE_STYLE('',(#314518)); +#314518 = SURFACE_STYLE_FILL_AREA(#314519); +#314519 = FILL_AREA_STYLE('',(#314520)); +#314520 = FILL_AREA_STYLE_COLOUR('',#282540); +#314521 = OVER_RIDING_STYLED_ITEM('overriding color',(#314522),#64343, + #313616); +#314522 = PRESENTATION_STYLE_ASSIGNMENT((#314523)); +#314523 = SURFACE_STYLE_USAGE(.BOTH.,#314524); +#314524 = SURFACE_SIDE_STYLE('',(#314525)); +#314525 = SURFACE_STYLE_FILL_AREA(#314526); +#314526 = FILL_AREA_STYLE('',(#314527)); +#314527 = FILL_AREA_STYLE_COLOUR('',#282540); +#314528 = OVER_RIDING_STYLED_ITEM('overriding color',(#314529),#64360, + #313616); +#314529 = PRESENTATION_STYLE_ASSIGNMENT((#314530)); +#314530 = SURFACE_STYLE_USAGE(.BOTH.,#314531); +#314531 = SURFACE_SIDE_STYLE('',(#314532)); +#314532 = SURFACE_STYLE_FILL_AREA(#314533); +#314533 = FILL_AREA_STYLE('',(#314534)); +#314534 = FILL_AREA_STYLE_COLOUR('',#282540); +#314535 = OVER_RIDING_STYLED_ITEM('overriding color',(#314536),#64377, + #313616); +#314536 = PRESENTATION_STYLE_ASSIGNMENT((#314537)); +#314537 = SURFACE_STYLE_USAGE(.BOTH.,#314538); +#314538 = SURFACE_SIDE_STYLE('',(#314539)); +#314539 = SURFACE_STYLE_FILL_AREA(#314540); +#314540 = FILL_AREA_STYLE('',(#314541)); +#314541 = FILL_AREA_STYLE_COLOUR('',#282540); +#314542 = OVER_RIDING_STYLED_ITEM('overriding color',(#314543),#64394, + #313616); +#314543 = PRESENTATION_STYLE_ASSIGNMENT((#314544)); +#314544 = SURFACE_STYLE_USAGE(.BOTH.,#314545); +#314545 = SURFACE_SIDE_STYLE('',(#314546)); +#314546 = SURFACE_STYLE_FILL_AREA(#314547); +#314547 = FILL_AREA_STYLE('',(#314548)); +#314548 = FILL_AREA_STYLE_COLOUR('',#282540); +#314549 = OVER_RIDING_STYLED_ITEM('overriding color',(#314550),#64406, + #313616); +#314550 = PRESENTATION_STYLE_ASSIGNMENT((#314551)); +#314551 = SURFACE_STYLE_USAGE(.BOTH.,#314552); +#314552 = SURFACE_SIDE_STYLE('',(#314553)); +#314553 = SURFACE_STYLE_FILL_AREA(#314554); +#314554 = FILL_AREA_STYLE('',(#314555)); +#314555 = FILL_AREA_STYLE_COLOUR('',#282540); +#314556 = OVER_RIDING_STYLED_ITEM('overriding color',(#314557),#64423, + #313616); +#314557 = PRESENTATION_STYLE_ASSIGNMENT((#314558)); +#314558 = SURFACE_STYLE_USAGE(.BOTH.,#314559); +#314559 = SURFACE_SIDE_STYLE('',(#314560)); +#314560 = SURFACE_STYLE_FILL_AREA(#314561); +#314561 = FILL_AREA_STYLE('',(#314562)); +#314562 = FILL_AREA_STYLE_COLOUR('',#282540); +#314563 = OVER_RIDING_STYLED_ITEM('overriding color',(#314564),#64440, + #313616); +#314564 = PRESENTATION_STYLE_ASSIGNMENT((#314565)); +#314565 = SURFACE_STYLE_USAGE(.BOTH.,#314566); +#314566 = SURFACE_SIDE_STYLE('',(#314567)); +#314567 = SURFACE_STYLE_FILL_AREA(#314568); +#314568 = FILL_AREA_STYLE('',(#314569)); +#314569 = FILL_AREA_STYLE_COLOUR('',#282540); +#314570 = STYLED_ITEM('color',(#314571),#64452); +#314571 = PRESENTATION_STYLE_ASSIGNMENT((#314572,#314577)); +#314572 = SURFACE_STYLE_USAGE(.BOTH.,#314573); +#314573 = SURFACE_SIDE_STYLE('',(#314574)); +#314574 = SURFACE_STYLE_FILL_AREA(#314575); +#314575 = FILL_AREA_STYLE('',(#314576)); +#314576 = FILL_AREA_STYLE_COLOUR('',#278623); +#314577 = CURVE_STYLE('',#314578,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#314578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#314579 = OVER_RIDING_STYLED_ITEM('overriding color',(#314580),#64454, + #314570); +#314580 = PRESENTATION_STYLE_ASSIGNMENT((#314581)); +#314581 = SURFACE_STYLE_USAGE(.BOTH.,#314582); +#314582 = SURFACE_SIDE_STYLE('',(#314583)); +#314583 = SURFACE_STYLE_FILL_AREA(#314584); +#314584 = FILL_AREA_STYLE('',(#314585)); +#314585 = FILL_AREA_STYLE_COLOUR('',#282540); +#314586 = OVER_RIDING_STYLED_ITEM('overriding color',(#314587),#64494, + #314570); +#314587 = PRESENTATION_STYLE_ASSIGNMENT((#314588)); +#314588 = SURFACE_STYLE_USAGE(.BOTH.,#314589); +#314589 = SURFACE_SIDE_STYLE('',(#314590)); +#314590 = SURFACE_STYLE_FILL_AREA(#314591); +#314591 = FILL_AREA_STYLE('',(#314592)); +#314592 = FILL_AREA_STYLE_COLOUR('',#282540); +#314593 = OVER_RIDING_STYLED_ITEM('overriding color',(#314594),#64575, + #314570); +#314594 = PRESENTATION_STYLE_ASSIGNMENT((#314595)); +#314595 = SURFACE_STYLE_USAGE(.BOTH.,#314596); +#314596 = SURFACE_SIDE_STYLE('',(#314597)); +#314597 = SURFACE_STYLE_FILL_AREA(#314598); +#314598 = FILL_AREA_STYLE('',(#314599)); +#314599 = FILL_AREA_STYLE_COLOUR('',#282540); +#314600 = OVER_RIDING_STYLED_ITEM('overriding color',(#314601),#64600, + #314570); +#314601 = PRESENTATION_STYLE_ASSIGNMENT((#314602)); +#314602 = SURFACE_STYLE_USAGE(.BOTH.,#314603); +#314603 = SURFACE_SIDE_STYLE('',(#314604)); +#314604 = SURFACE_STYLE_FILL_AREA(#314605); +#314605 = FILL_AREA_STYLE('',(#314606)); +#314606 = FILL_AREA_STYLE_COLOUR('',#282540); +#314607 = OVER_RIDING_STYLED_ITEM('overriding color',(#314608),#64624, + #314570); +#314608 = PRESENTATION_STYLE_ASSIGNMENT((#314609)); +#314609 = SURFACE_STYLE_USAGE(.BOTH.,#314610); +#314610 = SURFACE_SIDE_STYLE('',(#314611)); +#314611 = SURFACE_STYLE_FILL_AREA(#314612); +#314612 = FILL_AREA_STYLE('',(#314613)); +#314613 = FILL_AREA_STYLE_COLOUR('',#282540); +#314614 = OVER_RIDING_STYLED_ITEM('overriding color',(#314615),#64690, + #314570); +#314615 = PRESENTATION_STYLE_ASSIGNMENT((#314616)); +#314616 = SURFACE_STYLE_USAGE(.BOTH.,#314617); +#314617 = SURFACE_SIDE_STYLE('',(#314618)); +#314618 = SURFACE_STYLE_FILL_AREA(#314619); +#314619 = FILL_AREA_STYLE('',(#314620)); +#314620 = FILL_AREA_STYLE_COLOUR('',#282540); +#314621 = OVER_RIDING_STYLED_ITEM('overriding color',(#314622),#64707, + #314570); +#314622 = PRESENTATION_STYLE_ASSIGNMENT((#314623)); +#314623 = SURFACE_STYLE_USAGE(.BOTH.,#314624); +#314624 = SURFACE_SIDE_STYLE('',(#314625)); +#314625 = SURFACE_STYLE_FILL_AREA(#314626); +#314626 = FILL_AREA_STYLE('',(#314627)); +#314627 = FILL_AREA_STYLE_COLOUR('',#282540); +#314628 = OVER_RIDING_STYLED_ITEM('overriding color',(#314629),#64724, + #314570); +#314629 = PRESENTATION_STYLE_ASSIGNMENT((#314630)); +#314630 = SURFACE_STYLE_USAGE(.BOTH.,#314631); +#314631 = SURFACE_SIDE_STYLE('',(#314632)); +#314632 = SURFACE_STYLE_FILL_AREA(#314633); +#314633 = FILL_AREA_STYLE('',(#314634)); +#314634 = FILL_AREA_STYLE_COLOUR('',#282540); +#314635 = OVER_RIDING_STYLED_ITEM('overriding color',(#314636),#64741, + #314570); +#314636 = PRESENTATION_STYLE_ASSIGNMENT((#314637)); +#314637 = SURFACE_STYLE_USAGE(.BOTH.,#314638); +#314638 = SURFACE_SIDE_STYLE('',(#314639)); +#314639 = SURFACE_STYLE_FILL_AREA(#314640); +#314640 = FILL_AREA_STYLE('',(#314641)); +#314641 = FILL_AREA_STYLE_COLOUR('',#282540); +#314642 = OVER_RIDING_STYLED_ITEM('overriding color',(#314643),#64758, + #314570); +#314643 = PRESENTATION_STYLE_ASSIGNMENT((#314644)); +#314644 = SURFACE_STYLE_USAGE(.BOTH.,#314645); +#314645 = SURFACE_SIDE_STYLE('',(#314646)); +#314646 = SURFACE_STYLE_FILL_AREA(#314647); +#314647 = FILL_AREA_STYLE('',(#314648)); +#314648 = FILL_AREA_STYLE_COLOUR('',#282540); +#314649 = OVER_RIDING_STYLED_ITEM('overriding color',(#314650),#64775, + #314570); +#314650 = PRESENTATION_STYLE_ASSIGNMENT((#314651)); +#314651 = SURFACE_STYLE_USAGE(.BOTH.,#314652); +#314652 = SURFACE_SIDE_STYLE('',(#314653)); +#314653 = SURFACE_STYLE_FILL_AREA(#314654); +#314654 = FILL_AREA_STYLE('',(#314655)); +#314655 = FILL_AREA_STYLE_COLOUR('',#282540); +#314656 = OVER_RIDING_STYLED_ITEM('overriding color',(#314657),#64792, + #314570); +#314657 = PRESENTATION_STYLE_ASSIGNMENT((#314658)); +#314658 = SURFACE_STYLE_USAGE(.BOTH.,#314659); +#314659 = SURFACE_SIDE_STYLE('',(#314660)); +#314660 = SURFACE_STYLE_FILL_AREA(#314661); +#314661 = FILL_AREA_STYLE('',(#314662)); +#314662 = FILL_AREA_STYLE_COLOUR('',#282540); +#314663 = STYLED_ITEM('color',(#314664),#64804); +#314664 = PRESENTATION_STYLE_ASSIGNMENT((#314665,#314670)); +#314665 = SURFACE_STYLE_USAGE(.BOTH.,#314666); +#314666 = SURFACE_SIDE_STYLE('',(#314667)); +#314667 = SURFACE_STYLE_FILL_AREA(#314668); +#314668 = FILL_AREA_STYLE('',(#314669)); +#314669 = FILL_AREA_STYLE_COLOUR('',#278623); +#314670 = CURVE_STYLE('',#314671,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#314671 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#314672 = OVER_RIDING_STYLED_ITEM('overriding color',(#314673),#64806, + #314663); +#314673 = PRESENTATION_STYLE_ASSIGNMENT((#314674)); +#314674 = SURFACE_STYLE_USAGE(.BOTH.,#314675); +#314675 = SURFACE_SIDE_STYLE('',(#314676)); +#314676 = SURFACE_STYLE_FILL_AREA(#314677); +#314677 = FILL_AREA_STYLE('',(#314678)); +#314678 = FILL_AREA_STYLE_COLOUR('',#292826); +#314679 = OVER_RIDING_STYLED_ITEM('overriding color',(#314680),#64846, + #314663); +#314680 = PRESENTATION_STYLE_ASSIGNMENT((#314681)); +#314681 = SURFACE_STYLE_USAGE(.BOTH.,#314682); +#314682 = SURFACE_SIDE_STYLE('',(#314683)); +#314683 = SURFACE_STYLE_FILL_AREA(#314684); +#314684 = FILL_AREA_STYLE('',(#314685)); +#314685 = FILL_AREA_STYLE_COLOUR('',#292826); +#314686 = OVER_RIDING_STYLED_ITEM('overriding color',(#314687),#64913, + #314663); +#314687 = PRESENTATION_STYLE_ASSIGNMENT((#314688)); +#314688 = SURFACE_STYLE_USAGE(.BOTH.,#314689); +#314689 = SURFACE_SIDE_STYLE('',(#314690)); +#314690 = SURFACE_STYLE_FILL_AREA(#314691); +#314691 = FILL_AREA_STYLE('',(#314692)); +#314692 = FILL_AREA_STYLE_COLOUR('',#292826); +#314693 = OVER_RIDING_STYLED_ITEM('overriding color',(#314694),#64938, + #314663); +#314694 = PRESENTATION_STYLE_ASSIGNMENT((#314695)); +#314695 = SURFACE_STYLE_USAGE(.BOTH.,#314696); +#314696 = SURFACE_SIDE_STYLE('',(#314697)); +#314697 = SURFACE_STYLE_FILL_AREA(#314698); +#314698 = FILL_AREA_STYLE('',(#314699)); +#314699 = FILL_AREA_STYLE_COLOUR('',#292826); +#314700 = OVER_RIDING_STYLED_ITEM('overriding color',(#314701),#64963, + #314663); +#314701 = PRESENTATION_STYLE_ASSIGNMENT((#314702)); +#314702 = SURFACE_STYLE_USAGE(.BOTH.,#314703); +#314703 = SURFACE_SIDE_STYLE('',(#314704)); +#314704 = SURFACE_STYLE_FILL_AREA(#314705); +#314705 = FILL_AREA_STYLE('',(#314706)); +#314706 = FILL_AREA_STYLE_COLOUR('',#292826); +#314707 = OVER_RIDING_STYLED_ITEM('overriding color',(#314708),#64996, + #314663); +#314708 = PRESENTATION_STYLE_ASSIGNMENT((#314709)); +#314709 = SURFACE_STYLE_USAGE(.BOTH.,#314710); +#314710 = SURFACE_SIDE_STYLE('',(#314711)); +#314711 = SURFACE_STYLE_FILL_AREA(#314712); +#314712 = FILL_AREA_STYLE('',(#314713)); +#314713 = FILL_AREA_STYLE_COLOUR('',#292826); +#314714 = OVER_RIDING_STYLED_ITEM('overriding color',(#314715),#65020, + #314663); +#314715 = PRESENTATION_STYLE_ASSIGNMENT((#314716)); +#314716 = SURFACE_STYLE_USAGE(.BOTH.,#314717); +#314717 = SURFACE_SIDE_STYLE('',(#314718)); +#314718 = SURFACE_STYLE_FILL_AREA(#314719); +#314719 = FILL_AREA_STYLE('',(#314720)); +#314720 = FILL_AREA_STYLE_COLOUR('',#292826); +#314721 = OVER_RIDING_STYLED_ITEM('overriding color',(#314722),#65044, + #314663); +#314722 = PRESENTATION_STYLE_ASSIGNMENT((#314723)); +#314723 = SURFACE_STYLE_USAGE(.BOTH.,#314724); +#314724 = SURFACE_SIDE_STYLE('',(#314725)); +#314725 = SURFACE_STYLE_FILL_AREA(#314726); +#314726 = FILL_AREA_STYLE('',(#314727)); +#314727 = FILL_AREA_STYLE_COLOUR('',#292826); +#314728 = OVER_RIDING_STYLED_ITEM('overriding color',(#314729),#65069, + #314663); +#314729 = PRESENTATION_STYLE_ASSIGNMENT((#314730)); +#314730 = SURFACE_STYLE_USAGE(.BOTH.,#314731); +#314731 = SURFACE_SIDE_STYLE('',(#314732)); +#314732 = SURFACE_STYLE_FILL_AREA(#314733); +#314733 = FILL_AREA_STYLE('',(#314734)); +#314734 = FILL_AREA_STYLE_COLOUR('',#292826); +#314735 = OVER_RIDING_STYLED_ITEM('overriding color',(#314736),#65094, + #314663); +#314736 = PRESENTATION_STYLE_ASSIGNMENT((#314737)); +#314737 = SURFACE_STYLE_USAGE(.BOTH.,#314738); +#314738 = SURFACE_SIDE_STYLE('',(#314739)); +#314739 = SURFACE_STYLE_FILL_AREA(#314740); +#314740 = FILL_AREA_STYLE('',(#314741)); +#314741 = FILL_AREA_STYLE_COLOUR('',#292826); +#314742 = OVER_RIDING_STYLED_ITEM('overriding color',(#314743),#65111, + #314663); +#314743 = PRESENTATION_STYLE_ASSIGNMENT((#314744)); +#314744 = SURFACE_STYLE_USAGE(.BOTH.,#314745); +#314745 = SURFACE_SIDE_STYLE('',(#314746)); +#314746 = SURFACE_STYLE_FILL_AREA(#314747); +#314747 = FILL_AREA_STYLE('',(#314748)); +#314748 = FILL_AREA_STYLE_COLOUR('',#292826); +#314749 = OVER_RIDING_STYLED_ITEM('overriding color',(#314750),#65128, + #314663); +#314750 = PRESENTATION_STYLE_ASSIGNMENT((#314751)); +#314751 = SURFACE_STYLE_USAGE(.BOTH.,#314752); +#314752 = SURFACE_SIDE_STYLE('',(#314753)); +#314753 = SURFACE_STYLE_FILL_AREA(#314754); +#314754 = FILL_AREA_STYLE('',(#314755)); +#314755 = FILL_AREA_STYLE_COLOUR('',#292826); +#314756 = OVER_RIDING_STYLED_ITEM('overriding color',(#314757),#65145, + #314663); +#314757 = PRESENTATION_STYLE_ASSIGNMENT((#314758)); +#314758 = SURFACE_STYLE_USAGE(.BOTH.,#314759); +#314759 = SURFACE_SIDE_STYLE('',(#314760)); +#314760 = SURFACE_STYLE_FILL_AREA(#314761); +#314761 = FILL_AREA_STYLE('',(#314762)); +#314762 = FILL_AREA_STYLE_COLOUR('',#292826); +#314763 = OVER_RIDING_STYLED_ITEM('overriding color',(#314764),#65176, + #314663); +#314764 = PRESENTATION_STYLE_ASSIGNMENT((#314765)); +#314765 = SURFACE_STYLE_USAGE(.BOTH.,#314766); +#314766 = SURFACE_SIDE_STYLE('',(#314767)); +#314767 = SURFACE_STYLE_FILL_AREA(#314768); +#314768 = FILL_AREA_STYLE('',(#314769)); +#314769 = FILL_AREA_STYLE_COLOUR('',#292826); +#314770 = OVER_RIDING_STYLED_ITEM('overriding color',(#314771),#65194, + #314663); +#314771 = PRESENTATION_STYLE_ASSIGNMENT((#314772)); +#314772 = SURFACE_STYLE_USAGE(.BOTH.,#314773); +#314773 = SURFACE_SIDE_STYLE('',(#314774)); +#314774 = SURFACE_STYLE_FILL_AREA(#314775); +#314775 = FILL_AREA_STYLE('',(#314776)); +#314776 = FILL_AREA_STYLE_COLOUR('',#292826); +#314777 = OVER_RIDING_STYLED_ITEM('overriding color',(#314778),#65212, + #314663); +#314778 = PRESENTATION_STYLE_ASSIGNMENT((#314779)); +#314779 = SURFACE_STYLE_USAGE(.BOTH.,#314780); +#314780 = SURFACE_SIDE_STYLE('',(#314781)); +#314781 = SURFACE_STYLE_FILL_AREA(#314782); +#314782 = FILL_AREA_STYLE('',(#314783)); +#314783 = FILL_AREA_STYLE_COLOUR('',#292826); +#314784 = OVER_RIDING_STYLED_ITEM('overriding color',(#314785),#65229, + #314663); +#314785 = PRESENTATION_STYLE_ASSIGNMENT((#314786)); +#314786 = SURFACE_STYLE_USAGE(.BOTH.,#314787); +#314787 = SURFACE_SIDE_STYLE('',(#314788)); +#314788 = SURFACE_STYLE_FILL_AREA(#314789); +#314789 = FILL_AREA_STYLE('',(#314790)); +#314790 = FILL_AREA_STYLE_COLOUR('',#292826); +#314791 = OVER_RIDING_STYLED_ITEM('overriding color',(#314792),#65246, + #314663); +#314792 = PRESENTATION_STYLE_ASSIGNMENT((#314793)); +#314793 = SURFACE_STYLE_USAGE(.BOTH.,#314794); +#314794 = SURFACE_SIDE_STYLE('',(#314795)); +#314795 = SURFACE_STYLE_FILL_AREA(#314796); +#314796 = FILL_AREA_STYLE('',(#314797)); +#314797 = FILL_AREA_STYLE_COLOUR('',#292826); +#314798 = STYLED_ITEM('color',(#314799),#65258); +#314799 = PRESENTATION_STYLE_ASSIGNMENT((#314800,#314805)); +#314800 = SURFACE_STYLE_USAGE(.BOTH.,#314801); +#314801 = SURFACE_SIDE_STYLE('',(#314802)); +#314802 = SURFACE_STYLE_FILL_AREA(#314803); +#314803 = FILL_AREA_STYLE('',(#314804)); +#314804 = FILL_AREA_STYLE_COLOUR('',#278623); +#314805 = CURVE_STYLE('',#314806,POSITIVE_LENGTH_MEASURE(0.1),#278626); +#314806 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#314807 = OVER_RIDING_STYLED_ITEM('overriding color',(#314808),#65260, + #314798); +#314808 = PRESENTATION_STYLE_ASSIGNMENT((#314809)); +#314809 = SURFACE_STYLE_USAGE(.BOTH.,#314810); +#314810 = SURFACE_SIDE_STYLE('',(#314811)); +#314811 = SURFACE_STYLE_FILL_AREA(#314812); +#314812 = FILL_AREA_STYLE('',(#314813)); +#314813 = FILL_AREA_STYLE_COLOUR('',#282540); +#314814 = OVER_RIDING_STYLED_ITEM('overriding color',(#314815),#65300, + #314798); +#314815 = PRESENTATION_STYLE_ASSIGNMENT((#314816)); +#314816 = SURFACE_STYLE_USAGE(.BOTH.,#314817); +#314817 = SURFACE_SIDE_STYLE('',(#314818)); +#314818 = SURFACE_STYLE_FILL_AREA(#314819); +#314819 = FILL_AREA_STYLE('',(#314820)); +#314820 = FILL_AREA_STYLE_COLOUR('',#282540); +#314821 = OVER_RIDING_STYLED_ITEM('overriding color',(#314822),#65381, + #314798); +#314822 = PRESENTATION_STYLE_ASSIGNMENT((#314823)); +#314823 = SURFACE_STYLE_USAGE(.BOTH.,#314824); +#314824 = SURFACE_SIDE_STYLE('',(#314825)); +#314825 = SURFACE_STYLE_FILL_AREA(#314826); +#314826 = FILL_AREA_STYLE('',(#314827)); +#314827 = FILL_AREA_STYLE_COLOUR('',#282540); +#314828 = OVER_RIDING_STYLED_ITEM('overriding color',(#314829),#65406, + #314798); +#314829 = PRESENTATION_STYLE_ASSIGNMENT((#314830)); +#314830 = SURFACE_STYLE_USAGE(.BOTH.,#314831); +#314831 = SURFACE_SIDE_STYLE('',(#314832)); +#314832 = SURFACE_STYLE_FILL_AREA(#314833); +#314833 = FILL_AREA_STYLE('',(#314834)); +#314834 = FILL_AREA_STYLE_COLOUR('',#282540); +#314835 = OVER_RIDING_STYLED_ITEM('overriding color',(#314836),#65430, + #314798); +#314836 = PRESENTATION_STYLE_ASSIGNMENT((#314837)); +#314837 = SURFACE_STYLE_USAGE(.BOTH.,#314838); +#314838 = SURFACE_SIDE_STYLE('',(#314839)); +#314839 = SURFACE_STYLE_FILL_AREA(#314840); +#314840 = FILL_AREA_STYLE('',(#314841)); +#314841 = FILL_AREA_STYLE_COLOUR('',#282540); +#314842 = OVER_RIDING_STYLED_ITEM('overriding color',(#314843),#65496, + #314798); +#314843 = PRESENTATION_STYLE_ASSIGNMENT((#314844)); +#314844 = SURFACE_STYLE_USAGE(.BOTH.,#314845); +#314845 = SURFACE_SIDE_STYLE('',(#314846)); +#314846 = SURFACE_STYLE_FILL_AREA(#314847); +#314847 = FILL_AREA_STYLE('',(#314848)); +#314848 = FILL_AREA_STYLE_COLOUR('',#282540); +#314849 = OVER_RIDING_STYLED_ITEM('overriding color',(#314850),#65513, + #314798); +#314850 = PRESENTATION_STYLE_ASSIGNMENT((#314851)); +#314851 = SURFACE_STYLE_USAGE(.BOTH.,#314852); +#314852 = SURFACE_SIDE_STYLE('',(#314853)); +#314853 = SURFACE_STYLE_FILL_AREA(#314854); +#314854 = FILL_AREA_STYLE('',(#314855)); +#314855 = FILL_AREA_STYLE_COLOUR('',#282540); +#314856 = OVER_RIDING_STYLED_ITEM('overriding color',(#314857),#65530, + #314798); +#314857 = PRESENTATION_STYLE_ASSIGNMENT((#314858)); +#314858 = SURFACE_STYLE_USAGE(.BOTH.,#314859); +#314859 = SURFACE_SIDE_STYLE('',(#314860)); +#314860 = SURFACE_STYLE_FILL_AREA(#314861); +#314861 = FILL_AREA_STYLE('',(#314862)); +#314862 = FILL_AREA_STYLE_COLOUR('',#282540); +#314863 = OVER_RIDING_STYLED_ITEM('overriding color',(#314864),#65547, + #314798); +#314864 = PRESENTATION_STYLE_ASSIGNMENT((#314865)); +#314865 = SURFACE_STYLE_USAGE(.BOTH.,#314866); +#314866 = SURFACE_SIDE_STYLE('',(#314867)); +#314867 = SURFACE_STYLE_FILL_AREA(#314868); +#314868 = FILL_AREA_STYLE('',(#314869)); +#314869 = FILL_AREA_STYLE_COLOUR('',#282540); +#314870 = OVER_RIDING_STYLED_ITEM('overriding color',(#314871),#65564, + #314798); +#314871 = PRESENTATION_STYLE_ASSIGNMENT((#314872)); +#314872 = SURFACE_STYLE_USAGE(.BOTH.,#314873); +#314873 = SURFACE_SIDE_STYLE('',(#314874)); +#314874 = SURFACE_STYLE_FILL_AREA(#314875); +#314875 = FILL_AREA_STYLE('',(#314876)); +#314876 = FILL_AREA_STYLE_COLOUR('',#282540); +#314877 = OVER_RIDING_STYLED_ITEM('overriding color',(#314878),#65581, + #314798); +#314878 = PRESENTATION_STYLE_ASSIGNMENT((#314879)); +#314879 = SURFACE_STYLE_USAGE(.BOTH.,#314880); +#314880 = SURFACE_SIDE_STYLE('',(#314881)); +#314881 = SURFACE_STYLE_FILL_AREA(#314882); +#314882 = FILL_AREA_STYLE('',(#314883)); +#314883 = FILL_AREA_STYLE_COLOUR('',#282540); +#314884 = OVER_RIDING_STYLED_ITEM('overriding color',(#314885),#65598, + #314798); +#314885 = PRESENTATION_STYLE_ASSIGNMENT((#314886)); +#314886 = SURFACE_STYLE_USAGE(.BOTH.,#314887); +#314887 = SURFACE_SIDE_STYLE('',(#314888)); +#314888 = SURFACE_STYLE_FILL_AREA(#314889); +#314889 = FILL_AREA_STYLE('',(#314890)); +#314890 = FILL_AREA_STYLE_COLOUR('',#282540); +#314891 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #314892),#261429); +#314892 = STYLED_ITEM('color',(#314893),#259303); +#314893 = PRESENTATION_STYLE_ASSIGNMENT((#314894)); +#314894 = SURFACE_STYLE_USAGE(.BOTH.,#314895); +#314895 = SURFACE_SIDE_STYLE('',(#314896,#314899)); +#314896 = SURFACE_STYLE_FILL_AREA(#314897); +#314897 = FILL_AREA_STYLE('',(#314898)); +#314898 = FILL_AREA_STYLE_COLOUR('',#294362); +#314899 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #294362,(#314900)); +#314900 = SURFACE_STYLE_TRANSPARENT(0.170000016689); +ENDSEC; +END-ISO-10303-21; diff --git a/03-Architecture-Hardware/kicad/HBOX-v3-PROD.step b/03-Architecture-Hardware/kicad/HBOX-v3-PROD.step new file mode 100644 index 0000000..437708d --- /dev/null +++ b/03-Architecture-Hardware/kicad/HBOX-v3-PROD.step @@ -0,0 +1,325043 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('KiCad electronic assembly'),'2;1'); +FILE_NAME('HBOX-v3-PROD.step','2026-07-06T16:06:08',('Pcbnew'),('Kicad') + ,'Open CASCADE STEP processor 7.9','KiCad to STEP converter','Unknown' + ); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('HBOX-v3-PROD 1','HBOX-v3-PROD 1','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23,#27,#31,#35,#39,#43,#47, + #51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111, + #115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163, + #167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215, + #219,#223,#227,#231,#235,#239,#243,#247,#251,#255,#259,#263,#267, + #271,#275,#279,#283,#287,#291,#295,#299,#303,#307,#311,#315,#319, + #323,#327,#331,#335,#339,#343,#347,#351,#355,#359,#363,#367,#371, + #375,#379,#383,#387,#391,#395,#399,#403,#407,#411,#415,#419,#423, + #427,#431,#435,#439,#443,#447,#451,#455,#459,#463,#467,#471,#475, + #479,#483,#487,#491,#495,#499,#503,#507,#511),#515); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18); +#16 = CARTESIAN_POINT('',(167.36665,-59.3231,1.595)); +#17 = DIRECTION('',(0.,0.,1.)); +#18 = DIRECTION('',(1.,0.,0.)); +#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22); +#20 = CARTESIAN_POINT('',(116.19165,-46.3231,1.595)); +#21 = DIRECTION('',(0.,0.,1.)); +#22 = DIRECTION('',(1.,0.,0.)); +#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26); +#24 = CARTESIAN_POINT('',(101.36665,-74.3231,1.595)); +#25 = DIRECTION('',(0.,0.,1.)); +#26 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27 = AXIS2_PLACEMENT_3D('',#28,#29,#30); +#28 = CARTESIAN_POINT('',(168.19165,-65.8231,1.595)); +#29 = DIRECTION('',(-0.,0.,1.)); +#30 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#31 = AXIS2_PLACEMENT_3D('',#32,#33,#34); +#32 = CARTESIAN_POINT('',(210.19165,-61.8231,1.595)); +#33 = DIRECTION('',(0.,-0.,1.)); +#34 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(178.19165,-59.3231,1.595)); +#37 = DIRECTION('',(0.,0.,1.)); +#38 = DIRECTION('',(1.,0.,0.)); +#39 = AXIS2_PLACEMENT_3D('',#40,#41,#42); +#40 = CARTESIAN_POINT('',(198.25415,-44.3231,1.595)); +#41 = DIRECTION('',(0.,0.,1.)); +#42 = DIRECTION('',(1.,0.,0.)); +#43 = AXIS2_PLACEMENT_3D('',#44,#45,#46); +#44 = CARTESIAN_POINT('',(210.19165,-108.3231,1.595)); +#45 = DIRECTION('',(0.,-0.,1.)); +#46 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47 = AXIS2_PLACEMENT_3D('',#48,#49,#50); +#48 = CARTESIAN_POINT('',(210.16665,-80.0731,1.595)); +#49 = DIRECTION('',(0.,-0.,1.)); +#50 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51 = AXIS2_PLACEMENT_3D('',#52,#53,#54); +#52 = CARTESIAN_POINT('',(175.84165,-53.4731,1.595)); +#53 = DIRECTION('',(-0.,0.,1.)); +#54 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(197.62165,-112.5731,1.595)); +#57 = DIRECTION('',(0.,0.,1.)); +#58 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62); +#60 = CARTESIAN_POINT('',(194.25415,-44.3231,1.595)); +#61 = DIRECTION('',(0.,0.,1.)); +#62 = DIRECTION('',(1.,0.,0.)); +#63 = AXIS2_PLACEMENT_3D('',#64,#65,#66); +#64 = CARTESIAN_POINT('',(107.19165,-56.3231,1.595)); +#65 = DIRECTION('',(0.,-0.,1.)); +#66 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70); +#68 = CARTESIAN_POINT('',(187.96665,-114.8231,1.595)); +#69 = DIRECTION('',(0.,0.,1.)); +#70 = DIRECTION('',(1.,0.,0.)); +#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74); +#72 = CARTESIAN_POINT('',(92.24165,-112.3231,1.595)); +#73 = DIRECTION('',(0.,0.,1.)); +#74 = DIRECTION('',(1.,0.,0.)); +#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78); +#76 = CARTESIAN_POINT('',(135.79165,-46.3231,1.595)); +#77 = DIRECTION('',(0.,0.,1.)); +#78 = DIRECTION('',(1.,0.,0.)); +#79 = AXIS2_PLACEMENT_3D('',#80,#81,#82); +#80 = CARTESIAN_POINT('',(138.65,-60.9,1.595)); +#81 = DIRECTION('',(0.,0.,1.)); +#82 = DIRECTION('',(1.,0.,0.)); +#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86); +#84 = CARTESIAN_POINT('',(94.19165,-94.3231,1.595)); +#85 = DIRECTION('',(0.,0.,1.)); +#86 = DIRECTION('',(1.,0.,0.)); +#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90); +#88 = CARTESIAN_POINT('',(112.71665,-87.2281,1.595)); +#89 = DIRECTION('',(0.,0.,1.)); +#90 = DIRECTION('',(1.,0.,0.)); +#91 = AXIS2_PLACEMENT_3D('',#92,#93,#94); +#92 = CARTESIAN_POINT('',(130.99165,-104.3231,1.595)); +#93 = DIRECTION('',(0.,0.,1.)); +#94 = DIRECTION('',(1.,0.,0.)); +#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98); +#96 = CARTESIAN_POINT('',(128.91665,-112.3231,1.595)); +#97 = DIRECTION('',(0.,0.,1.)); +#98 = DIRECTION('',(1.,0.,0.)); +#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102); +#100 = CARTESIAN_POINT('',(179.51665,-111.8231,1.595)); +#101 = DIRECTION('',(0.,0.,1.)); +#102 = DIRECTION('',(1.,0.,0.)); +#103 = AXIS2_PLACEMENT_3D('',#104,#105,#106); +#104 = CARTESIAN_POINT('',(203.05,-84.45,1.595)); +#105 = DIRECTION('',(0.,0.,1.)); +#106 = DIRECTION('',(1.,0.,0.)); +#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110); +#108 = CARTESIAN_POINT('',(179.69165,-96.3231,1.595)); +#109 = DIRECTION('',(-0.,0.,1.)); +#110 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#111 = AXIS2_PLACEMENT_3D('',#112,#113,#114); +#112 = CARTESIAN_POINT('',(174.19165,-74.8231,1.595)); +#113 = DIRECTION('',(0.,0.,1.)); +#114 = DIRECTION('',(1.,0.,0.)); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(94.19165,-98.3231,1.595)); +#117 = DIRECTION('',(0.,0.,1.)); +#118 = DIRECTION('',(1.,0.,0.)); +#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122); +#120 = CARTESIAN_POINT('',(100.19165,-88.3231,1.595)); +#121 = DIRECTION('',(0.,0.,1.)); +#122 = DIRECTION('',(1.,0.,0.)); +#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126); +#124 = CARTESIAN_POINT('',(132.91665,-112.3231,1.595)); +#125 = DIRECTION('',(0.,0.,1.)); +#126 = DIRECTION('',(1.,0.,0.)); +#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130); +#128 = CARTESIAN_POINT('',(97.86665,-107.3231,1.595)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DIRECTION('',(1.,0.,0.)); +#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134); +#132 = CARTESIAN_POINT('',(179.51665,-102.3231,1.595)); +#133 = DIRECTION('',(0.,0.,1.)); +#134 = DIRECTION('',(1.,0.,0.)); +#135 = AXIS2_PLACEMENT_3D('',#136,#137,#138); +#136 = CARTESIAN_POINT('',(110.91665,-112.3231,1.595)); +#137 = DIRECTION('',(0.,0.,1.)); +#138 = DIRECTION('',(1.,0.,0.)); +#139 = AXIS2_PLACEMENT_3D('',#140,#141,#142); +#140 = CARTESIAN_POINT('',(91.19165,-61.8231,1.595)); +#141 = DIRECTION('',(0.,0.,1.)); +#142 = DIRECTION('',(1.,0.,0.)); +#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146); +#144 = CARTESIAN_POINT('',(175.84165,-48.6231,1.595)); +#145 = DIRECTION('',(-0.,0.,1.)); +#146 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#147 = AXIS2_PLACEMENT_3D('',#148,#149,#150); +#148 = CARTESIAN_POINT('',(145.45,-60.2,1.595)); +#149 = DIRECTION('',(0.,0.,1.)); +#150 = DIRECTION('',(1.,0.,0.)); +#151 = AXIS2_PLACEMENT_3D('',#152,#153,#154); +#152 = CARTESIAN_POINT('',(96.19165,-116.3231,1.595)); +#153 = DIRECTION('',(0.,0.,1.)); +#154 = DIRECTION('',(1.,0.,0.)); +#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158); +#156 = CARTESIAN_POINT('',(127.19165,-46.3231,1.595)); +#157 = DIRECTION('',(0.,0.,1.)); +#158 = DIRECTION('',(1.,0.,0.)); +#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162); +#160 = CARTESIAN_POINT('',(173.86665,-45.3231,1.595)); +#161 = DIRECTION('',(0.,0.,1.)); +#162 = DIRECTION('',(1.,0.,0.)); +#163 = AXIS2_PLACEMENT_3D('',#164,#165,#166); +#164 = CARTESIAN_POINT('',(187.91665,-109.8231,1.595)); +#165 = DIRECTION('',(0.,0.,1.)); +#166 = DIRECTION('',(1.,0.,0.)); +#167 = AXIS2_PLACEMENT_3D('',#168,#169,#170); +#168 = CARTESIAN_POINT('',(96.86665,-102.3231,1.595)); +#169 = DIRECTION('',(0.,0.,1.)); +#170 = DIRECTION('',(1.,0.,0.)); +#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174); +#172 = CARTESIAN_POINT('',(106.19165,-96.3231,1.595)); +#173 = DIRECTION('',(0.,0.,1.)); +#174 = DIRECTION('',(1.,0.,0.)); +#175 = AXIS2_PLACEMENT_3D('',#176,#177,#178); +#176 = CARTESIAN_POINT('',(168.41665,-45.3231,1.595)); +#177 = DIRECTION('',(0.,0.,1.)); +#178 = DIRECTION('',(1.,0.,0.)); +#179 = AXIS2_PLACEMENT_3D('',#180,#181,#182); +#180 = CARTESIAN_POINT('',(111.19165,-46.3231,1.595)); +#181 = DIRECTION('',(0.,0.,1.)); +#182 = DIRECTION('',(1.,0.,0.)); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(130.19165,-96.3231,1.595)); +#185 = DIRECTION('',(0.,0.,1.)); +#186 = DIRECTION('',(1.,0.,0.)); +#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190); +#188 = CARTESIAN_POINT('',(130.31165,-117.6731,1.595)); +#189 = DIRECTION('',(0.,0.,1.)); +#190 = DIRECTION('',(1.,0.,0.)); +#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194); +#192 = CARTESIAN_POINT('',(202.25415,-48.3231,1.595)); +#193 = DIRECTION('',(0.,0.,1.)); +#194 = DIRECTION('',(1.,0.,0.)); +#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198); +#196 = CARTESIAN_POINT('',(101.59165,-83.3231,1.595)); +#197 = DIRECTION('',(0.,0.,1.)); +#198 = DIRECTION('',(1.,0.,0.)); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(148.175,-135.6,1.595)); +#201 = DIRECTION('',(0.,0.,1.)); +#202 = DIRECTION('',(1.,0.,0.)); +#203 = AXIS2_PLACEMENT_3D('',#204,#205,#206); +#204 = CARTESIAN_POINT('',(196.54165,-74.8231,1.595)); +#205 = DIRECTION('',(0.,0.,1.)); +#206 = DIRECTION('',(1.,0.,0.)); +#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210); +#208 = CARTESIAN_POINT('',(169.21665,-52.7281,1.595)); +#209 = DIRECTION('',(0.,0.,1.)); +#210 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#211 = AXIS2_PLACEMENT_3D('',#212,#213,#214); +#212 = CARTESIAN_POINT('',(206.25415,-48.3231,1.595)); +#213 = DIRECTION('',(0.,0.,1.)); +#214 = DIRECTION('',(1.,0.,0.)); +#215 = AXIS2_PLACEMENT_3D('',#216,#217,#218); +#216 = CARTESIAN_POINT('',(161.69165,-45.2981,1.595)); +#217 = DIRECTION('',(0.,-0.,1.)); +#218 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#219 = AXIS2_PLACEMENT_3D('',#220,#221,#222); +#220 = CARTESIAN_POINT('',(179.51665,-107.3231,1.595)); +#221 = DIRECTION('',(0.,0.,1.)); +#222 = DIRECTION('',(1.,0.,0.)); +#223 = AXIS2_PLACEMENT_3D('',#224,#225,#226); +#224 = CARTESIAN_POINT('',(161.425,-124.75,1.595)); +#225 = DIRECTION('',(0.,-0.,1.)); +#226 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#227 = AXIS2_PLACEMENT_3D('',#228,#229,#230); +#228 = CARTESIAN_POINT('',(163.86665,-59.3231,1.595)); +#229 = DIRECTION('',(0.,0.,1.)); +#230 = DIRECTION('',(1.,0.,0.)); +#231 = AXIS2_PLACEMENT_3D('',#232,#233,#234); +#232 = CARTESIAN_POINT('',(98.19165,-46.3231,1.595)); +#233 = DIRECTION('',(0.,0.,1.)); +#234 = DIRECTION('',(1.,0.,0.)); +#235 = AXIS2_PLACEMENT_3D('',#236,#237,#238); +#236 = CARTESIAN_POINT('',(202.25415,-44.3231,1.595)); +#237 = DIRECTION('',(0.,0.,1.)); +#238 = DIRECTION('',(1.,0.,0.)); +#239 = AXIS2_PLACEMENT_3D('',#240,#241,#242); +#240 = CARTESIAN_POINT('',(198.69165,-103.2731,1.595)); +#241 = DIRECTION('',(-0.,0.,1.)); +#242 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#243 = AXIS2_PLACEMENT_3D('',#244,#245,#246); +#244 = CARTESIAN_POINT('',(101.86665,-107.3231,1.595)); +#245 = DIRECTION('',(0.,0.,1.)); +#246 = DIRECTION('',(1.,0.,0.)); +#247 = AXIS2_PLACEMENT_3D('',#248,#249,#250); +#248 = CARTESIAN_POINT('',(95.41665,-112.3231,1.595)); +#249 = DIRECTION('',(0.,0.,1.)); +#250 = DIRECTION('',(1.,0.,0.)); +#251 = AXIS2_PLACEMENT_3D('',#252,#253,#254); +#252 = CARTESIAN_POINT('',(99.19165,-94.3231,1.595)); +#253 = DIRECTION('',(0.,0.,1.)); +#254 = DIRECTION('',(1.,0.,0.)); +#255 = AXIS2_PLACEMENT_3D('',#256,#257,#258); +#256 = CARTESIAN_POINT('',(210.16665,-70.8231,1.595)); +#257 = DIRECTION('',(0.,-0.,1.)); +#258 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#259 = AXIS2_PLACEMENT_3D('',#260,#261,#262); +#260 = CARTESIAN_POINT('',(178.19165,-64.8231,1.595)); +#261 = DIRECTION('',(0.,0.,1.)); +#262 = DIRECTION('',(1.,0.,0.)); +#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266); +#264 = CARTESIAN_POINT('',(206.25415,-44.3231,1.595)); +#265 = DIRECTION('',(0.,0.,1.)); +#266 = DIRECTION('',(1.,0.,0.)); +#267 = AXIS2_PLACEMENT_3D('',#268,#269,#270); +#268 = CARTESIAN_POINT('',(198.25415,-48.3231,1.595)); +#269 = DIRECTION('',(0.,0.,1.)); +#270 = DIRECTION('',(1.,0.,0.)); +#271 = AXIS2_PLACEMENT_3D('',#272,#273,#274); +#272 = CARTESIAN_POINT('',(165.4,-124.75,1.595)); +#273 = DIRECTION('',(0.,-0.,1.)); +#274 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#275 = AXIS2_PLACEMENT_3D('',#276,#277,#278); +#276 = CARTESIAN_POINT('',(100.19165,-116.3231,1.595)); +#277 = DIRECTION('',(0.,0.,1.)); +#278 = DIRECTION('',(1.,0.,0.)); +#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282); +#280 = CARTESIAN_POINT('',(100.86665,-102.3231,1.595)); +#281 = DIRECTION('',(0.,0.,1.)); +#282 = DIRECTION('',(1.,0.,0.)); +#283 = AXIS2_PLACEMENT_3D('',#284,#285,#286); +#284 = CARTESIAN_POINT('',(124.91665,-112.3231,1.595)); +#285 = DIRECTION('',(0.,0.,1.)); +#286 = DIRECTION('',(1.,0.,0.)); +#287 = AXIS2_PLACEMENT_3D('',#288,#289,#290); +#288 = CARTESIAN_POINT('',(98.74165,-112.3231,1.595)); +#289 = DIRECTION('',(0.,0.,1.)); +#290 = DIRECTION('',(1.,0.,0.)); +#291 = AXIS2_PLACEMENT_3D('',#292,#293,#294); +#292 = CARTESIAN_POINT('',(210.19165,-121.3231,1.595)); +#293 = DIRECTION('',(0.,-0.,1.)); +#294 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298); +#296 = CARTESIAN_POINT('',(120.66665,-104.3231,1.595)); +#297 = DIRECTION('',(0.,0.,1.)); +#298 = DIRECTION('',(1.,0.,0.)); +#299 = AXIS2_PLACEMENT_3D('',#300,#301,#302); +#300 = CARTESIAN_POINT('',(161.175,-129.425,1.595)); +#301 = DIRECTION('',(0.,0.,1.)); +#302 = DIRECTION('',(1.,0.,0.)); +#303 = AXIS2_PLACEMENT_3D('',#304,#305,#306); +#304 = CARTESIAN_POINT('',(92.75415,-105.8231,1.595)); +#305 = DIRECTION('',(0.,0.,1.)); +#306 = DIRECTION('',(1.,0.,0.)); +#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310); +#308 = CARTESIAN_POINT('',(172.69165,-133.8231,1.595)); +#309 = DIRECTION('',(0.,0.,1.)); +#310 = DIRECTION('',(1.,0.,0.)); +#311 = AXIS2_PLACEMENT_3D('',#312,#313,#314); +#312 = CARTESIAN_POINT('',(108.36665,-102.3231,1.595)); +#313 = DIRECTION('',(0.,0.,1.)); +#314 = DIRECTION('',(1.,0.,0.)); +#315 = AXIS2_PLACEMENT_3D('',#316,#317,#318); +#316 = CARTESIAN_POINT('',(189.28415,-55.8656,1.595)); +#317 = DIRECTION('',(0.,0.,1.)); +#318 = DIRECTION('',(1.,0.,0.)); +#319 = AXIS2_PLACEMENT_3D('',#320,#321,#322); +#320 = CARTESIAN_POINT('',(107.19165,-74.1031,1.595)); +#321 = DIRECTION('',(0.,-0.,1.)); +#322 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#323 = AXIS2_PLACEMENT_3D('',#324,#325,#326); +#324 = CARTESIAN_POINT('',(105.86665,-107.3231,1.595)); +#325 = DIRECTION('',(0.,0.,1.)); +#326 = DIRECTION('',(1.,0.,0.)); +#327 = AXIS2_PLACEMENT_3D('',#328,#329,#330); +#328 = CARTESIAN_POINT('',(162.19165,-51.2231,1.595)); +#329 = DIRECTION('',(0.,0.,1.)); +#330 = DIRECTION('',(1.,0.,0.)); +#331 = AXIS2_PLACEMENT_3D('',#332,#333,#334); +#332 = CARTESIAN_POINT('',(185.19165,-122.3231,1.595)); +#333 = DIRECTION('',(0.,0.,1.)); +#334 = DIRECTION('',(1.,0.,0.)); +#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338); +#336 = CARTESIAN_POINT('',(99.19165,-61.3231,1.595)); +#337 = DIRECTION('',(0.,0.,1.)); +#338 = DIRECTION('',(1.,0.,0.)); +#339 = AXIS2_PLACEMENT_3D('',#340,#341,#342); +#340 = CARTESIAN_POINT('',(178.36665,-69.3231,1.595)); +#341 = DIRECTION('',(-0.,0.,1.)); +#342 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#343 = AXIS2_PLACEMENT_3D('',#344,#345,#346); +#344 = CARTESIAN_POINT('',(114.91665,-112.3231,1.595)); +#345 = DIRECTION('',(0.,0.,1.)); +#346 = DIRECTION('',(1.,0.,0.)); +#347 = AXIS2_PLACEMENT_3D('',#348,#349,#350); +#348 = CARTESIAN_POINT('',(121.74165,-94.3231,1.595)); +#349 = DIRECTION('',(0.,0.,1.)); +#350 = DIRECTION('',(1.,0.,0.)); +#351 = AXIS2_PLACEMENT_3D('',#352,#353,#354); +#352 = CARTESIAN_POINT('',(90.19165,-54.3231,1.595)); +#353 = DIRECTION('',(0.,0.,1.)); +#354 = DIRECTION('',(1.,0.,0.)); +#355 = AXIS2_PLACEMENT_3D('',#356,#357,#358); +#356 = CARTESIAN_POINT('',(134.86665,-91.3231,1.595)); +#357 = DIRECTION('',(0.,0.,1.)); +#358 = DIRECTION('',(1.,0.,0.)); +#359 = AXIS2_PLACEMENT_3D('',#360,#361,#362); +#360 = CARTESIAN_POINT('',(104.86665,-102.3231,1.595)); +#361 = DIRECTION('',(0.,0.,1.)); +#362 = DIRECTION('',(1.,0.,0.)); +#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366); +#364 = CARTESIAN_POINT('',(89.69165,-71.8231,1.595)); +#365 = DIRECTION('',(0.,0.,1.)); +#366 = DIRECTION('',(1.,0.,0.)); +#367 = AXIS2_PLACEMENT_3D('',#368,#369,#370); +#368 = CARTESIAN_POINT('',(179.69165,-116.3231,1.595)); +#369 = DIRECTION('',(0.,0.,1.)); +#370 = DIRECTION('',(1.,0.,0.)); +#371 = AXIS2_PLACEMENT_3D('',#372,#373,#374); +#372 = CARTESIAN_POINT('',(199.19165,-133.3231,1.595)); +#373 = DIRECTION('',(0.,0.,1.)); +#374 = DIRECTION('',(1.,0.,0.)); +#375 = AXIS2_PLACEMENT_3D('',#376,#377,#378); +#376 = CARTESIAN_POINT('',(134.99165,-104.3231,1.595)); +#377 = DIRECTION('',(0.,0.,1.)); +#378 = DIRECTION('',(1.,0.,0.)); +#379 = AXIS2_PLACEMENT_3D('',#380,#381,#382); +#380 = CARTESIAN_POINT('',(85.19165,-61.3231,1.595)); +#381 = DIRECTION('',(0.,0.,1.)); +#382 = DIRECTION('',(1.,0.,0.)); +#383 = AXIS2_PLACEMENT_3D('',#384,#385,#386); +#384 = CARTESIAN_POINT('',(183.19165,-63.3231,1.595)); +#385 = DIRECTION('',(0.,0.,1.)); +#386 = DIRECTION('',(1.,0.,0.)); +#387 = AXIS2_PLACEMENT_3D('',#388,#389,#390); +#388 = CARTESIAN_POINT('',(112.41665,-97.3231,1.595)); +#389 = DIRECTION('',(0.,0.,1.)); +#390 = DIRECTION('',(1.,0.,0.)); +#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394); +#392 = CARTESIAN_POINT('',(177.09165,-45.3231,1.595)); +#393 = DIRECTION('',(0.,0.,1.)); +#394 = DIRECTION('',(1.,0.,0.)); +#395 = AXIS2_PLACEMENT_3D('',#396,#397,#398); +#396 = CARTESIAN_POINT('',(100.19165,-98.3231,1.595)); +#397 = DIRECTION('',(0.,0.,1.)); +#398 = DIRECTION('',(1.,0.,0.)); +#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402); +#400 = CARTESIAN_POINT('',(102.91665,-112.3231,1.595)); +#401 = DIRECTION('',(0.,0.,1.)); +#402 = DIRECTION('',(1.,0.,0.)); +#403 = AXIS2_PLACEMENT_3D('',#404,#405,#406); +#404 = CARTESIAN_POINT('',(154.69165,-48.5231,1.595)); +#405 = DIRECTION('',(0.,-0.,1.)); +#406 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#407 = AXIS2_PLACEMENT_3D('',#408,#409,#410); +#408 = CARTESIAN_POINT('',(95.19165,-83.3231,1.595)); +#409 = DIRECTION('',(0.,0.,1.)); +#410 = DIRECTION('',(1.,0.,0.)); +#411 = AXIS2_PLACEMENT_3D('',#412,#413,#414); +#412 = CARTESIAN_POINT('',(126.16665,-104.3231,1.595)); +#413 = DIRECTION('',(0.,0.,1.)); +#414 = DIRECTION('',(1.,0.,0.)); +#415 = AXIS2_PLACEMENT_3D('',#416,#417,#418); +#416 = CARTESIAN_POINT('',(161.13595,-55.5552,1.595)); +#417 = DIRECTION('',(0.,-0.,1.)); +#418 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422); +#420 = CARTESIAN_POINT('',(210.19165,-95.3231,1.595)); +#421 = DIRECTION('',(0.,-0.,1.)); +#422 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#423 = AXIS2_PLACEMENT_3D('',#424,#425,#426); +#424 = CARTESIAN_POINT('',(101.36665,-69.3231,1.595)); +#425 = DIRECTION('',(0.,0.,1.)); +#426 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#427 = AXIS2_PLACEMENT_3D('',#428,#429,#430); +#428 = CARTESIAN_POINT('',(194.25415,-48.3231,1.595)); +#429 = DIRECTION('',(0.,0.,1.)); +#430 = DIRECTION('',(1.,0.,0.)); +#431 = AXIS2_PLACEMENT_3D('',#432,#433,#434); +#432 = CARTESIAN_POINT('',(174.19165,-59.3231,1.595)); +#433 = DIRECTION('',(0.,0.,1.)); +#434 = DIRECTION('',(1.,0.,0.)); +#435 = AXIS2_PLACEMENT_3D('',#436,#437,#438); +#436 = CARTESIAN_POINT('',(92.19165,-116.3231,1.595)); +#437 = DIRECTION('',(0.,0.,1.)); +#438 = DIRECTION('',(1.,0.,0.)); +#439 = AXIS2_PLACEMENT_3D('',#440,#441,#442); +#440 = CARTESIAN_POINT('',(106.91665,-112.3231,1.595)); +#441 = DIRECTION('',(0.,0.,1.)); +#442 = DIRECTION('',(1.,0.,0.)); +#443 = AXIS2_PLACEMENT_3D('',#444,#445,#446); +#444 = CARTESIAN_POINT('',(118.91665,-112.3231,1.595)); +#445 = DIRECTION('',(0.,0.,1.)); +#446 = DIRECTION('',(1.,0.,0.)); +#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450); +#448 = CARTESIAN_POINT('',(134.86665,-95.3231,1.595)); +#449 = DIRECTION('',(0.,0.,1.)); +#450 = DIRECTION('',(1.,0.,0.)); +#451 = AXIS2_PLACEMENT_3D('',#452,#453,#454); +#452 = CARTESIAN_POINT('',(134.86665,-99.8231,1.595)); +#453 = DIRECTION('',(0.,0.,1.)); +#454 = DIRECTION('',(1.,0.,0.)); +#455 = AXIS2_PLACEMENT_3D('',#456,#457,#458); +#456 = CARTESIAN_POINT('',(112.36665,-102.3231,1.595)); +#457 = DIRECTION('',(0.,0.,1.)); +#458 = DIRECTION('',(1.,0.,0.)); +#459 = AXIS2_PLACEMENT_3D('',#460,#461,#462); +#460 = CARTESIAN_POINT('',(188.49165,-103.8231,1.595)); +#461 = DIRECTION('',(0.,0.,1.)); +#462 = DIRECTION('',(1.,0.,0.)); +#463 = AXIS2_PLACEMENT_3D('',#464,#465,#466); +#464 = CARTESIAN_POINT('',(136.91665,-112.3231,1.595)); +#465 = DIRECTION('',(0.,0.,1.)); +#466 = DIRECTION('',(1.,0.,0.)); +#467 = AXIS2_PLACEMENT_3D('',#468,#469,#470); +#468 = CARTESIAN_POINT('',(179.74165,-51.2231,1.595)); +#469 = DIRECTION('',(0.,0.,1.)); +#470 = DIRECTION('',(1.,0.,0.)); +#471 = AXIS2_PLACEMENT_3D('',#472,#473,#474); +#472 = CARTESIAN_POINT('',(199.69165,-61.8231,1.595)); +#473 = DIRECTION('',(0.,0.,1.)); +#474 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478); +#476 = CARTESIAN_POINT('',(203.1,-92.1,1.595)); +#477 = DIRECTION('',(0.,0.,1.)); +#478 = DIRECTION('',(1.,0.,0.)); +#479 = AXIS2_PLACEMENT_3D('',#480,#481,#482); +#480 = CARTESIAN_POINT('',(115.25165,-129.5831,-8.5E-02)); +#481 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#482 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#483 = AXIS2_PLACEMENT_3D('',#484,#485,#486); +#484 = CARTESIAN_POINT('',(138.11165,-129.5831,-8.5E-02)); +#485 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#486 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#487 = AXIS2_PLACEMENT_3D('',#488,#489,#490); +#488 = CARTESIAN_POINT('',(133.03165,-81.3231,-8.500000000001E-02)); +#489 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#490 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#491 = AXIS2_PLACEMENT_3D('',#492,#493,#494); +#492 = CARTESIAN_POINT('',(106.11165,-81.3231,-8.500000000001E-02)); +#493 = DIRECTION('',(-1.224646799147E-16,1.224646799147E-16,1.)); +#494 = DIRECTION('',(1.110223024625E-16,1.,-1.224646799147E-16)); +#495 = AXIS2_PLACEMENT_3D('',#496,#497,#498); +#496 = CARTESIAN_POINT('',(0.,0.,0.)); +#497 = DIRECTION('',(0.,0.,1.)); +#498 = DIRECTION('',(1.,0.,-0.)); +#499 = AXIS2_PLACEMENT_3D('',#500,#501,#502); +#500 = CARTESIAN_POINT('',(0.,0.,0.)); +#501 = DIRECTION('',(0.,0.,1.)); +#502 = DIRECTION('',(1.,0.,-0.)); +#503 = AXIS2_PLACEMENT_3D('',#504,#505,#506); +#504 = CARTESIAN_POINT('',(0.,0.,0.)); +#505 = DIRECTION('',(0.,0.,1.)); +#506 = DIRECTION('',(1.,0.,-0.)); +#507 = AXIS2_PLACEMENT_3D('',#508,#509,#510); +#508 = CARTESIAN_POINT('',(0.,0.,0.)); +#509 = DIRECTION('',(0.,0.,1.)); +#510 = DIRECTION('',(1.,0.,-0.)); +#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514); +#512 = CARTESIAN_POINT('',(0.,0.,0.)); +#513 = DIRECTION('',(0.,0.,1.)); +#514 = DIRECTION('',(1.,0.,-0.)); +#515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#519)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#516,#517,#518)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#516 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#517 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#518 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#519 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-06),#516, + 'distance_accuracy_value','confusion accuracy'); +#520 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#521 = SHAPE_DEFINITION_REPRESENTATION(#522,#528); +#522 = PRODUCT_DEFINITION_SHAPE('','',#523); +#523 = PRODUCT_DEFINITION('design','',#524,#527); +#524 = PRODUCT_DEFINITION_FORMATION('','',#525); +#525 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#526)); +#526 = PRODUCT_CONTEXT('',#2,'mechanical'); +#527 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#528 = SHAPE_REPRESENTATION('',(#11,#529),#533); +#529 = AXIS2_PLACEMENT_3D('',#530,#531,#532); +#530 = CARTESIAN_POINT('',(0.,0.,0.)); +#531 = DIRECTION('',(0.,0.,1.)); +#532 = DIRECTION('',(1.,0.,-0.)); +#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#537)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#534,#535,#536)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#534 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#535 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#536 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#537 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#534, + 'distance_accuracy_value','confusion accuracy'); +#538 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#539,#541); +#539 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#540) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#540 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); +#541 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#542 + ); +#542 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','R2','',#5,#523,$); +#543 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#525)); +#544 = SHAPE_DEFINITION_REPRESENTATION(#545,#551); +#545 = PRODUCT_DEFINITION_SHAPE('','',#546); +#546 = PRODUCT_DEFINITION('design','',#547,#550); +#547 = PRODUCT_DEFINITION_FORMATION('','',#548); +#548 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#549)); +#549 = PRODUCT_CONTEXT('',#2,'mechanical'); +#550 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#551 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#552),#1342); +#552 = MANIFOLD_SOLID_BREP('',#553); +#553 = CLOSED_SHELL('',(#554,#594,#677,#702,#727,#794,#811,#828,#877, + #894,#911,#960,#977,#1046,#1077,#1101,#1170,#1194,#1211,#1228,#1245, + #1262,#1279,#1296,#1313,#1330)); +#554 = ADVANCED_FACE('',(#555),#589,.F.); +#555 = FACE_BOUND('',#556,.F.); +#556 = EDGE_LOOP('',(#557,#567,#575,#583)); +#557 = ORIENTED_EDGE('',*,*,#558,.F.); +#558 = EDGE_CURVE('',#559,#561,#563,.T.); +#559 = VERTEX_POINT('',#560); +#560 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#561 = VERTEX_POINT('',#562); +#562 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#563 = LINE('',#564,#565); +#564 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#565 = VECTOR('',#566,1.); +#566 = DIRECTION('',(0.,0.,1.)); +#567 = ORIENTED_EDGE('',*,*,#568,.T.); +#568 = EDGE_CURVE('',#559,#569,#571,.T.); +#569 = VERTEX_POINT('',#570); +#570 = CARTESIAN_POINT('',(-0.8,0.4,4.5E-02)); +#571 = LINE('',#572,#573); +#572 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#573 = VECTOR('',#574,1.); +#574 = DIRECTION('',(0.,1.,0.)); +#575 = ORIENTED_EDGE('',*,*,#576,.T.); +#576 = EDGE_CURVE('',#569,#577,#579,.T.); +#577 = VERTEX_POINT('',#578); +#578 = CARTESIAN_POINT('',(-0.8,0.4,0.405)); +#579 = LINE('',#580,#581); +#580 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#581 = VECTOR('',#582,1.); +#582 = DIRECTION('',(0.,0.,1.)); +#583 = ORIENTED_EDGE('',*,*,#584,.F.); +#584 = EDGE_CURVE('',#561,#577,#585,.T.); +#585 = LINE('',#586,#587); +#586 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#587 = VECTOR('',#588,1.); +#588 = DIRECTION('',(0.,1.,0.)); +#589 = PLANE('',#590); +#590 = AXIS2_PLACEMENT_3D('',#591,#592,#593); +#591 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#592 = DIRECTION('',(1.,0.,0.)); +#593 = DIRECTION('',(0.,0.,1.)); +#594 = ADVANCED_FACE('',(#595),#672,.F.); +#595 = FACE_BOUND('',#596,.F.); +#596 = EDGE_LOOP('',(#597,#607,#614,#615,#624,#632,#641,#649,#657,#665) + ); +#597 = ORIENTED_EDGE('',*,*,#598,.F.); +#598 = EDGE_CURVE('',#599,#601,#603,.T.); +#599 = VERTEX_POINT('',#600); +#600 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#601 = VERTEX_POINT('',#602); +#602 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#603 = LINE('',#604,#605); +#604 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#605 = VECTOR('',#606,1.); +#606 = DIRECTION('',(1.,0.,0.)); +#607 = ORIENTED_EDGE('',*,*,#608,.F.); +#608 = EDGE_CURVE('',#559,#599,#609,.T.); +#609 = CIRCLE('',#610,4.5E-02); +#610 = AXIS2_PLACEMENT_3D('',#611,#612,#613); +#611 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#612 = DIRECTION('',(0.,-1.,0.)); +#613 = DIRECTION('',(0.,0.,1.)); +#614 = ORIENTED_EDGE('',*,*,#558,.T.); +#615 = ORIENTED_EDGE('',*,*,#616,.T.); +#616 = EDGE_CURVE('',#561,#617,#619,.T.); +#617 = VERTEX_POINT('',#618); +#618 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#619 = CIRCLE('',#620,4.5E-02); +#620 = AXIS2_PLACEMENT_3D('',#621,#622,#623); +#621 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#622 = DIRECTION('',(0.,1.,0.)); +#623 = DIRECTION('',(0.,-0.,1.)); +#624 = ORIENTED_EDGE('',*,*,#625,.T.); +#625 = EDGE_CURVE('',#617,#626,#628,.T.); +#626 = VERTEX_POINT('',#627); +#627 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#628 = LINE('',#629,#630); +#629 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#630 = VECTOR('',#631,1.); +#631 = DIRECTION('',(1.,0.,0.)); +#632 = ORIENTED_EDGE('',*,*,#633,.F.); +#633 = EDGE_CURVE('',#634,#626,#636,.T.); +#634 = VERTEX_POINT('',#635); +#635 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#636 = CIRCLE('',#637,4.5E-02); +#637 = AXIS2_PLACEMENT_3D('',#638,#639,#640); +#638 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#639 = DIRECTION('',(0.,-1.,0.)); +#640 = DIRECTION('',(0.,0.,1.)); +#641 = ORIENTED_EDGE('',*,*,#642,.F.); +#642 = EDGE_CURVE('',#643,#634,#645,.T.); +#643 = VERTEX_POINT('',#644); +#644 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#645 = LINE('',#646,#647); +#646 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#647 = VECTOR('',#648,1.); +#648 = DIRECTION('',(1.,0.,0.)); +#649 = ORIENTED_EDGE('',*,*,#650,.F.); +#650 = EDGE_CURVE('',#651,#643,#653,.T.); +#651 = VERTEX_POINT('',#652); +#652 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#653 = LINE('',#654,#655); +#654 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#655 = VECTOR('',#656,1.); +#656 = DIRECTION('',(0.,0.,1.)); +#657 = ORIENTED_EDGE('',*,*,#658,.T.); +#658 = EDGE_CURVE('',#651,#659,#661,.T.); +#659 = VERTEX_POINT('',#660); +#660 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#661 = LINE('',#662,#663); +#662 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#663 = VECTOR('',#664,1.); +#664 = DIRECTION('',(1.,0.,0.)); +#665 = ORIENTED_EDGE('',*,*,#666,.T.); +#666 = EDGE_CURVE('',#659,#601,#667,.T.); +#667 = CIRCLE('',#668,4.5E-02); +#668 = AXIS2_PLACEMENT_3D('',#669,#670,#671); +#669 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#670 = DIRECTION('',(0.,1.,0.)); +#671 = DIRECTION('',(0.,-0.,1.)); +#672 = PLANE('',#673); +#673 = AXIS2_PLACEMENT_3D('',#674,#675,#676); +#674 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#675 = DIRECTION('',(0.,1.,0.)); +#676 = DIRECTION('',(0.,-0.,1.)); +#677 = ADVANCED_FACE('',(#678),#697,.T.); +#678 = FACE_BOUND('',#679,.T.); +#679 = EDGE_LOOP('',(#680,#681,#690,#696)); +#680 = ORIENTED_EDGE('',*,*,#568,.T.); +#681 = ORIENTED_EDGE('',*,*,#682,.T.); +#682 = EDGE_CURVE('',#569,#683,#685,.T.); +#683 = VERTEX_POINT('',#684); +#684 = CARTESIAN_POINT('',(-0.755,0.4,-2.775557561563E-17)); +#685 = CIRCLE('',#686,4.5E-02); +#686 = AXIS2_PLACEMENT_3D('',#687,#688,#689); +#687 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#688 = DIRECTION('',(0.,-1.,0.)); +#689 = DIRECTION('',(0.,0.,1.)); +#690 = ORIENTED_EDGE('',*,*,#691,.F.); +#691 = EDGE_CURVE('',#599,#683,#692,.T.); +#692 = LINE('',#693,#694); +#693 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#694 = VECTOR('',#695,1.); +#695 = DIRECTION('',(0.,1.,0.)); +#696 = ORIENTED_EDGE('',*,*,#608,.F.); +#697 = CYLINDRICAL_SURFACE('',#698,4.5E-02); +#698 = AXIS2_PLACEMENT_3D('',#699,#700,#701); +#699 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#700 = DIRECTION('',(0.,1.,0.)); +#701 = DIRECTION('',(-1.,0.,0.)); +#702 = ADVANCED_FACE('',(#703),#722,.T.); +#703 = FACE_BOUND('',#704,.T.); +#704 = EDGE_LOOP('',(#705,#706,#714,#721)); +#705 = ORIENTED_EDGE('',*,*,#616,.T.); +#706 = ORIENTED_EDGE('',*,*,#707,.T.); +#707 = EDGE_CURVE('',#617,#708,#710,.T.); +#708 = VERTEX_POINT('',#709); +#709 = CARTESIAN_POINT('',(-0.755,0.4,0.45)); +#710 = LINE('',#711,#712); +#711 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#712 = VECTOR('',#713,1.); +#713 = DIRECTION('',(0.,1.,0.)); +#714 = ORIENTED_EDGE('',*,*,#715,.F.); +#715 = EDGE_CURVE('',#577,#708,#716,.T.); +#716 = CIRCLE('',#717,4.5E-02); +#717 = AXIS2_PLACEMENT_3D('',#718,#719,#720); +#718 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#719 = DIRECTION('',(0.,1.,0.)); +#720 = DIRECTION('',(0.,-0.,1.)); +#721 = ORIENTED_EDGE('',*,*,#584,.F.); +#722 = CYLINDRICAL_SURFACE('',#723,4.5E-02); +#723 = AXIS2_PLACEMENT_3D('',#724,#725,#726); +#724 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#725 = DIRECTION('',(0.,1.,0.)); +#726 = DIRECTION('',(-1.,0.,0.)); +#727 = ADVANCED_FACE('',(#728),#789,.T.); +#728 = FACE_BOUND('',#729,.T.); +#729 = EDGE_LOOP('',(#730,#738,#739,#740,#741,#749,#758,#766,#774,#782) + ); +#730 = ORIENTED_EDGE('',*,*,#731,.F.); +#731 = EDGE_CURVE('',#683,#732,#734,.T.); +#732 = VERTEX_POINT('',#733); +#733 = CARTESIAN_POINT('',(-0.545,0.4,-2.775557561563E-17)); +#734 = LINE('',#735,#736); +#735 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#736 = VECTOR('',#737,1.); +#737 = DIRECTION('',(1.,0.,0.)); +#738 = ORIENTED_EDGE('',*,*,#682,.F.); +#739 = ORIENTED_EDGE('',*,*,#576,.T.); +#740 = ORIENTED_EDGE('',*,*,#715,.T.); +#741 = ORIENTED_EDGE('',*,*,#742,.T.); +#742 = EDGE_CURVE('',#708,#743,#745,.T.); +#743 = VERTEX_POINT('',#744); +#744 = CARTESIAN_POINT('',(-0.545,0.4,0.45)); +#745 = LINE('',#746,#747); +#746 = CARTESIAN_POINT('',(-0.8,0.4,0.45)); +#747 = VECTOR('',#748,1.); +#748 = DIRECTION('',(1.,0.,0.)); +#749 = ORIENTED_EDGE('',*,*,#750,.F.); +#750 = EDGE_CURVE('',#751,#743,#753,.T.); +#751 = VERTEX_POINT('',#752); +#752 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#753 = CIRCLE('',#754,4.5E-02); +#754 = AXIS2_PLACEMENT_3D('',#755,#756,#757); +#755 = CARTESIAN_POINT('',(-0.545,0.4,0.405)); +#756 = DIRECTION('',(0.,-1.,0.)); +#757 = DIRECTION('',(0.,0.,1.)); +#758 = ORIENTED_EDGE('',*,*,#759,.F.); +#759 = EDGE_CURVE('',#760,#751,#762,.T.); +#760 = VERTEX_POINT('',#761); +#761 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#762 = LINE('',#763,#764); +#763 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#764 = VECTOR('',#765,1.); +#765 = DIRECTION('',(1.,0.,0.)); +#766 = ORIENTED_EDGE('',*,*,#767,.F.); +#767 = EDGE_CURVE('',#768,#760,#770,.T.); +#768 = VERTEX_POINT('',#769); +#769 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#770 = LINE('',#771,#772); +#771 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#772 = VECTOR('',#773,1.); +#773 = DIRECTION('',(0.,0.,1.)); +#774 = ORIENTED_EDGE('',*,*,#775,.T.); +#775 = EDGE_CURVE('',#768,#776,#778,.T.); +#776 = VERTEX_POINT('',#777); +#777 = CARTESIAN_POINT('',(-0.5,0.4,4.5E-02)); +#778 = LINE('',#779,#780); +#779 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#780 = VECTOR('',#781,1.); +#781 = DIRECTION('',(1.,0.,0.)); +#782 = ORIENTED_EDGE('',*,*,#783,.T.); +#783 = EDGE_CURVE('',#776,#732,#784,.T.); +#784 = CIRCLE('',#785,4.5E-02); +#785 = AXIS2_PLACEMENT_3D('',#786,#787,#788); +#786 = CARTESIAN_POINT('',(-0.545,0.4,4.5E-02)); +#787 = DIRECTION('',(0.,1.,0.)); +#788 = DIRECTION('',(0.,-0.,1.)); +#789 = PLANE('',#790); +#790 = AXIS2_PLACEMENT_3D('',#791,#792,#793); +#791 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#792 = DIRECTION('',(0.,1.,0.)); +#793 = DIRECTION('',(0.,-0.,1.)); +#794 = ADVANCED_FACE('',(#795),#806,.F.); +#795 = FACE_BOUND('',#796,.F.); +#796 = EDGE_LOOP('',(#797,#798,#799,#800)); +#797 = ORIENTED_EDGE('',*,*,#731,.F.); +#798 = ORIENTED_EDGE('',*,*,#691,.F.); +#799 = ORIENTED_EDGE('',*,*,#598,.T.); +#800 = ORIENTED_EDGE('',*,*,#801,.T.); +#801 = EDGE_CURVE('',#601,#732,#802,.T.); +#802 = LINE('',#803,#804); +#803 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#804 = VECTOR('',#805,1.); +#805 = DIRECTION('',(0.,1.,0.)); +#806 = PLANE('',#807); +#807 = AXIS2_PLACEMENT_3D('',#808,#809,#810); +#808 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#809 = DIRECTION('',(0.,0.,1.)); +#810 = DIRECTION('',(1.,0.,-0.)); +#811 = ADVANCED_FACE('',(#812),#823,.T.); +#812 = FACE_BOUND('',#813,.T.); +#813 = EDGE_LOOP('',(#814,#815,#816,#817)); +#814 = ORIENTED_EDGE('',*,*,#666,.T.); +#815 = ORIENTED_EDGE('',*,*,#801,.T.); +#816 = ORIENTED_EDGE('',*,*,#783,.F.); +#817 = ORIENTED_EDGE('',*,*,#818,.F.); +#818 = EDGE_CURVE('',#659,#776,#819,.T.); +#819 = LINE('',#820,#821); +#820 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#821 = VECTOR('',#822,1.); +#822 = DIRECTION('',(0.,1.,0.)); +#823 = CYLINDRICAL_SURFACE('',#824,4.5E-02); +#824 = AXIS2_PLACEMENT_3D('',#825,#826,#827); +#825 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#826 = DIRECTION('',(0.,1.,0.)); +#827 = DIRECTION('',(1.,0.,0.)); +#828 = ADVANCED_FACE('',(#829),#872,.F.); +#829 = FACE_BOUND('',#830,.F.); +#830 = EDGE_LOOP('',(#831,#832,#833,#834,#842,#850,#858,#866)); +#831 = ORIENTED_EDGE('',*,*,#658,.F.); +#832 = ORIENTED_EDGE('',*,*,#650,.T.); +#833 = ORIENTED_EDGE('',*,*,#642,.T.); +#834 = ORIENTED_EDGE('',*,*,#835,.T.); +#835 = EDGE_CURVE('',#634,#836,#838,.T.); +#836 = VERTEX_POINT('',#837); +#837 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#838 = LINE('',#839,#840); +#839 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#840 = VECTOR('',#841,1.); +#841 = DIRECTION('',(1.,0.,0.)); +#842 = ORIENTED_EDGE('',*,*,#843,.T.); +#843 = EDGE_CURVE('',#836,#844,#846,.T.); +#844 = VERTEX_POINT('',#845); +#845 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#846 = LINE('',#847,#848); +#847 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#848 = VECTOR('',#849,1.); +#849 = DIRECTION('',(1.,0.,0.)); +#850 = ORIENTED_EDGE('',*,*,#851,.F.); +#851 = EDGE_CURVE('',#852,#844,#854,.T.); +#852 = VERTEX_POINT('',#853); +#853 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#854 = LINE('',#855,#856); +#855 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#856 = VECTOR('',#857,1.); +#857 = DIRECTION('',(0.,0.,1.)); +#858 = ORIENTED_EDGE('',*,*,#859,.F.); +#859 = EDGE_CURVE('',#860,#852,#862,.T.); +#860 = VERTEX_POINT('',#861); +#861 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#862 = LINE('',#863,#864); +#863 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#864 = VECTOR('',#865,1.); +#865 = DIRECTION('',(1.,0.,0.)); +#866 = ORIENTED_EDGE('',*,*,#867,.F.); +#867 = EDGE_CURVE('',#659,#860,#868,.T.); +#868 = LINE('',#869,#870); +#869 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#870 = VECTOR('',#871,1.); +#871 = DIRECTION('',(1.,0.,0.)); +#872 = PLANE('',#873); +#873 = AXIS2_PLACEMENT_3D('',#874,#875,#876); +#874 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#875 = DIRECTION('',(0.,1.,0.)); +#876 = DIRECTION('',(0.,-0.,1.)); +#877 = ADVANCED_FACE('',(#878),#889,.T.); +#878 = FACE_BOUND('',#879,.T.); +#879 = EDGE_LOOP('',(#880,#881,#882,#883)); +#880 = ORIENTED_EDGE('',*,*,#742,.F.); +#881 = ORIENTED_EDGE('',*,*,#707,.F.); +#882 = ORIENTED_EDGE('',*,*,#625,.T.); +#883 = ORIENTED_EDGE('',*,*,#884,.T.); +#884 = EDGE_CURVE('',#626,#743,#885,.T.); +#885 = LINE('',#886,#887); +#886 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#887 = VECTOR('',#888,1.); +#888 = DIRECTION('',(0.,1.,0.)); +#889 = PLANE('',#890); +#890 = AXIS2_PLACEMENT_3D('',#891,#892,#893); +#891 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#892 = DIRECTION('',(0.,0.,1.)); +#893 = DIRECTION('',(1.,0.,-0.)); +#894 = ADVANCED_FACE('',(#895),#906,.T.); +#895 = FACE_BOUND('',#896,.T.); +#896 = EDGE_LOOP('',(#897,#903,#904,#905)); +#897 = ORIENTED_EDGE('',*,*,#898,.T.); +#898 = EDGE_CURVE('',#634,#751,#899,.T.); +#899 = LINE('',#900,#901); +#900 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#901 = VECTOR('',#902,1.); +#902 = DIRECTION('',(0.,1.,0.)); +#903 = ORIENTED_EDGE('',*,*,#750,.T.); +#904 = ORIENTED_EDGE('',*,*,#884,.F.); +#905 = ORIENTED_EDGE('',*,*,#633,.F.); +#906 = CYLINDRICAL_SURFACE('',#907,4.5E-02); +#907 = AXIS2_PLACEMENT_3D('',#908,#909,#910); +#908 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#909 = DIRECTION('',(0.,1.,0.)); +#910 = DIRECTION('',(1.,0.,0.)); +#911 = ADVANCED_FACE('',(#912),#955,.T.); +#912 = FACE_BOUND('',#913,.T.); +#913 = EDGE_LOOP('',(#914,#915,#916,#917,#925,#933,#941,#949)); +#914 = ORIENTED_EDGE('',*,*,#775,.F.); +#915 = ORIENTED_EDGE('',*,*,#767,.T.); +#916 = ORIENTED_EDGE('',*,*,#759,.T.); +#917 = ORIENTED_EDGE('',*,*,#918,.T.); +#918 = EDGE_CURVE('',#751,#919,#921,.T.); +#919 = VERTEX_POINT('',#920); +#920 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#921 = LINE('',#922,#923); +#922 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#923 = VECTOR('',#924,1.); +#924 = DIRECTION('',(1.,0.,0.)); +#925 = ORIENTED_EDGE('',*,*,#926,.T.); +#926 = EDGE_CURVE('',#919,#927,#929,.T.); +#927 = VERTEX_POINT('',#928); +#928 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#929 = LINE('',#930,#931); +#930 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#931 = VECTOR('',#932,1.); +#932 = DIRECTION('',(1.,0.,0.)); +#933 = ORIENTED_EDGE('',*,*,#934,.F.); +#934 = EDGE_CURVE('',#935,#927,#937,.T.); +#935 = VERTEX_POINT('',#936); +#936 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#937 = LINE('',#938,#939); +#938 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#939 = VECTOR('',#940,1.); +#940 = DIRECTION('',(0.,0.,1.)); +#941 = ORIENTED_EDGE('',*,*,#942,.F.); +#942 = EDGE_CURVE('',#943,#935,#945,.T.); +#943 = VERTEX_POINT('',#944); +#944 = CARTESIAN_POINT('',(0.5,0.4,4.5E-02)); +#945 = LINE('',#946,#947); +#946 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#947 = VECTOR('',#948,1.); +#948 = DIRECTION('',(1.,0.,0.)); +#949 = ORIENTED_EDGE('',*,*,#950,.F.); +#950 = EDGE_CURVE('',#776,#943,#951,.T.); +#951 = LINE('',#952,#953); +#952 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#953 = VECTOR('',#954,1.); +#954 = DIRECTION('',(1.,0.,0.)); +#955 = PLANE('',#956); +#956 = AXIS2_PLACEMENT_3D('',#957,#958,#959); +#957 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#958 = DIRECTION('',(0.,1.,0.)); +#959 = DIRECTION('',(0.,-0.,1.)); +#960 = ADVANCED_FACE('',(#961),#972,.F.); +#961 = FACE_BOUND('',#962,.F.); +#962 = EDGE_LOOP('',(#963,#964,#965,#971)); +#963 = ORIENTED_EDGE('',*,*,#818,.F.); +#964 = ORIENTED_EDGE('',*,*,#867,.T.); +#965 = ORIENTED_EDGE('',*,*,#966,.T.); +#966 = EDGE_CURVE('',#860,#943,#967,.T.); +#967 = LINE('',#968,#969); +#968 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#969 = VECTOR('',#970,1.); +#970 = DIRECTION('',(0.,1.,0.)); +#971 = ORIENTED_EDGE('',*,*,#950,.F.); +#972 = PLANE('',#973); +#973 = AXIS2_PLACEMENT_3D('',#974,#975,#976); +#974 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#975 = DIRECTION('',(0.,0.,1.)); +#976 = DIRECTION('',(1.,0.,-0.)); +#977 = ADVANCED_FACE('',(#978),#1041,.F.); +#978 = FACE_BOUND('',#979,.F.); +#979 = EDGE_LOOP('',(#980,#990,#997,#998,#999,#1000,#1009,#1017,#1026, + #1034)); +#980 = ORIENTED_EDGE('',*,*,#981,.F.); +#981 = EDGE_CURVE('',#982,#984,#986,.T.); +#982 = VERTEX_POINT('',#983); +#983 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#984 = VERTEX_POINT('',#985); +#985 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#986 = LINE('',#987,#988); +#987 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#988 = VECTOR('',#989,1.); +#989 = DIRECTION('',(1.,0.,0.)); +#990 = ORIENTED_EDGE('',*,*,#991,.F.); +#991 = EDGE_CURVE('',#860,#982,#992,.T.); +#992 = CIRCLE('',#993,4.5E-02); +#993 = AXIS2_PLACEMENT_3D('',#994,#995,#996); +#994 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#995 = DIRECTION('',(0.,-1.,0.)); +#996 = DIRECTION('',(0.,0.,1.)); +#997 = ORIENTED_EDGE('',*,*,#859,.T.); +#998 = ORIENTED_EDGE('',*,*,#851,.T.); +#999 = ORIENTED_EDGE('',*,*,#843,.F.); +#1000 = ORIENTED_EDGE('',*,*,#1001,.T.); +#1001 = EDGE_CURVE('',#836,#1002,#1004,.T.); +#1002 = VERTEX_POINT('',#1003); +#1003 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#1004 = CIRCLE('',#1005,4.5E-02); +#1005 = AXIS2_PLACEMENT_3D('',#1006,#1007,#1008); +#1006 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#1007 = DIRECTION('',(0.,1.,0.)); +#1008 = DIRECTION('',(0.,-0.,1.)); +#1009 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1010 = EDGE_CURVE('',#1002,#1011,#1013,.T.); +#1011 = VERTEX_POINT('',#1012); +#1012 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#1013 = LINE('',#1014,#1015); +#1014 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1015 = VECTOR('',#1016,1.); +#1016 = DIRECTION('',(1.,0.,0.)); +#1017 = ORIENTED_EDGE('',*,*,#1018,.F.); +#1018 = EDGE_CURVE('',#1019,#1011,#1021,.T.); +#1019 = VERTEX_POINT('',#1020); +#1020 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#1021 = CIRCLE('',#1022,4.5E-02); +#1022 = AXIS2_PLACEMENT_3D('',#1023,#1024,#1025); +#1023 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#1024 = DIRECTION('',(0.,-1.,0.)); +#1025 = DIRECTION('',(0.,0.,1.)); +#1026 = ORIENTED_EDGE('',*,*,#1027,.F.); +#1027 = EDGE_CURVE('',#1028,#1019,#1030,.T.); +#1028 = VERTEX_POINT('',#1029); +#1029 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#1030 = LINE('',#1031,#1032); +#1031 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#1032 = VECTOR('',#1033,1.); +#1033 = DIRECTION('',(0.,0.,1.)); +#1034 = ORIENTED_EDGE('',*,*,#1035,.T.); +#1035 = EDGE_CURVE('',#1028,#984,#1036,.T.); +#1036 = CIRCLE('',#1037,4.5E-02); +#1037 = AXIS2_PLACEMENT_3D('',#1038,#1039,#1040); +#1038 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#1039 = DIRECTION('',(0.,1.,0.)); +#1040 = DIRECTION('',(0.,-0.,1.)); +#1041 = PLANE('',#1042); +#1042 = AXIS2_PLACEMENT_3D('',#1043,#1044,#1045); +#1043 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#1044 = DIRECTION('',(0.,1.,0.)); +#1045 = DIRECTION('',(0.,-0.,1.)); +#1046 = ADVANCED_FACE('',(#1047),#1072,.F.); +#1047 = FACE_BOUND('',#1048,.F.); +#1048 = EDGE_LOOP('',(#1049,#1050,#1058,#1066)); +#1049 = ORIENTED_EDGE('',*,*,#835,.F.); +#1050 = ORIENTED_EDGE('',*,*,#1051,.T.); +#1051 = EDGE_CURVE('',#634,#1052,#1054,.T.); +#1052 = VERTEX_POINT('',#1053); +#1053 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1054 = LINE('',#1055,#1056); +#1055 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#1056 = VECTOR('',#1057,1.); +#1057 = DIRECTION('',(0.,0.,1.)); +#1058 = ORIENTED_EDGE('',*,*,#1059,.T.); +#1059 = EDGE_CURVE('',#1052,#1060,#1062,.T.); +#1060 = VERTEX_POINT('',#1061); +#1061 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1062 = LINE('',#1063,#1064); +#1063 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1064 = VECTOR('',#1065,1.); +#1065 = DIRECTION('',(1.,0.,0.)); +#1066 = ORIENTED_EDGE('',*,*,#1067,.F.); +#1067 = EDGE_CURVE('',#836,#1060,#1068,.T.); +#1068 = LINE('',#1069,#1070); +#1069 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#1070 = VECTOR('',#1071,1.); +#1071 = DIRECTION('',(0.,0.,1.)); +#1072 = PLANE('',#1073); +#1073 = AXIS2_PLACEMENT_3D('',#1074,#1075,#1076); +#1074 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#1075 = DIRECTION('',(0.,1.,0.)); +#1076 = DIRECTION('',(0.,-0.,1.)); +#1077 = ADVANCED_FACE('',(#1078),#1096,.F.); +#1078 = FACE_BOUND('',#1079,.F.); +#1079 = EDGE_LOOP('',(#1080,#1081,#1082,#1090)); +#1080 = ORIENTED_EDGE('',*,*,#1051,.F.); +#1081 = ORIENTED_EDGE('',*,*,#898,.T.); +#1082 = ORIENTED_EDGE('',*,*,#1083,.T.); +#1083 = EDGE_CURVE('',#751,#1084,#1086,.T.); +#1084 = VERTEX_POINT('',#1085); +#1085 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#1086 = LINE('',#1087,#1088); +#1087 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#1088 = VECTOR('',#1089,1.); +#1089 = DIRECTION('',(0.,0.,1.)); +#1090 = ORIENTED_EDGE('',*,*,#1091,.F.); +#1091 = EDGE_CURVE('',#1052,#1084,#1092,.T.); +#1092 = LINE('',#1093,#1094); +#1093 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1094 = VECTOR('',#1095,1.); +#1095 = DIRECTION('',(0.,1.,0.)); +#1096 = PLANE('',#1097); +#1097 = AXIS2_PLACEMENT_3D('',#1098,#1099,#1100); +#1098 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#1099 = DIRECTION('',(1.,0.,0.)); +#1100 = DIRECTION('',(0.,0.,1.)); +#1101 = ADVANCED_FACE('',(#1102),#1165,.T.); +#1102 = FACE_BOUND('',#1103,.T.); +#1103 = EDGE_LOOP('',(#1104,#1114,#1121,#1122,#1123,#1124,#1133,#1141, + #1150,#1158)); +#1104 = ORIENTED_EDGE('',*,*,#1105,.F.); +#1105 = EDGE_CURVE('',#1106,#1108,#1110,.T.); +#1106 = VERTEX_POINT('',#1107); +#1107 = CARTESIAN_POINT('',(0.545,0.4,-2.775557561563E-17)); +#1108 = VERTEX_POINT('',#1109); +#1109 = CARTESIAN_POINT('',(0.755,0.4,-2.775557561563E-17)); +#1110 = LINE('',#1111,#1112); +#1111 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#1112 = VECTOR('',#1113,1.); +#1113 = DIRECTION('',(1.,0.,0.)); +#1114 = ORIENTED_EDGE('',*,*,#1115,.F.); +#1115 = EDGE_CURVE('',#943,#1106,#1116,.T.); +#1116 = CIRCLE('',#1117,4.5E-02); +#1117 = AXIS2_PLACEMENT_3D('',#1118,#1119,#1120); +#1118 = CARTESIAN_POINT('',(0.545,0.4,4.5E-02)); +#1119 = DIRECTION('',(0.,-1.,0.)); +#1120 = DIRECTION('',(0.,0.,1.)); +#1121 = ORIENTED_EDGE('',*,*,#942,.T.); +#1122 = ORIENTED_EDGE('',*,*,#934,.T.); +#1123 = ORIENTED_EDGE('',*,*,#926,.F.); +#1124 = ORIENTED_EDGE('',*,*,#1125,.T.); +#1125 = EDGE_CURVE('',#919,#1126,#1128,.T.); +#1126 = VERTEX_POINT('',#1127); +#1127 = CARTESIAN_POINT('',(0.545,0.4,0.45)); +#1128 = CIRCLE('',#1129,4.5E-02); +#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132); +#1130 = CARTESIAN_POINT('',(0.545,0.4,0.405)); +#1131 = DIRECTION('',(0.,1.,0.)); +#1132 = DIRECTION('',(0.,-0.,1.)); +#1133 = ORIENTED_EDGE('',*,*,#1134,.T.); +#1134 = EDGE_CURVE('',#1126,#1135,#1137,.T.); +#1135 = VERTEX_POINT('',#1136); +#1136 = CARTESIAN_POINT('',(0.755,0.4,0.45)); +#1137 = LINE('',#1138,#1139); +#1138 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#1139 = VECTOR('',#1140,1.); +#1140 = DIRECTION('',(1.,0.,0.)); +#1141 = ORIENTED_EDGE('',*,*,#1142,.F.); +#1142 = EDGE_CURVE('',#1143,#1135,#1145,.T.); +#1143 = VERTEX_POINT('',#1144); +#1144 = CARTESIAN_POINT('',(0.8,0.4,0.405)); +#1145 = CIRCLE('',#1146,4.5E-02); +#1146 = AXIS2_PLACEMENT_3D('',#1147,#1148,#1149); +#1147 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#1148 = DIRECTION('',(0.,-1.,0.)); +#1149 = DIRECTION('',(0.,0.,1.)); +#1150 = ORIENTED_EDGE('',*,*,#1151,.F.); +#1151 = EDGE_CURVE('',#1152,#1143,#1154,.T.); +#1152 = VERTEX_POINT('',#1153); +#1153 = CARTESIAN_POINT('',(0.8,0.4,4.5E-02)); +#1154 = LINE('',#1155,#1156); +#1155 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#1156 = VECTOR('',#1157,1.); +#1157 = DIRECTION('',(0.,0.,1.)); +#1158 = ORIENTED_EDGE('',*,*,#1159,.T.); +#1159 = EDGE_CURVE('',#1152,#1108,#1160,.T.); +#1160 = CIRCLE('',#1161,4.5E-02); +#1161 = AXIS2_PLACEMENT_3D('',#1162,#1163,#1164); +#1162 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#1163 = DIRECTION('',(0.,1.,0.)); +#1164 = DIRECTION('',(0.,-0.,1.)); +#1165 = PLANE('',#1166); +#1166 = AXIS2_PLACEMENT_3D('',#1167,#1168,#1169); +#1167 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#1168 = DIRECTION('',(0.,1.,0.)); +#1169 = DIRECTION('',(0.,-0.,1.)); +#1170 = ADVANCED_FACE('',(#1171),#1189,.T.); +#1171 = FACE_BOUND('',#1172,.T.); +#1172 = EDGE_LOOP('',(#1173,#1174,#1175,#1183)); +#1173 = ORIENTED_EDGE('',*,*,#918,.F.); +#1174 = ORIENTED_EDGE('',*,*,#1083,.T.); +#1175 = ORIENTED_EDGE('',*,*,#1176,.T.); +#1176 = EDGE_CURVE('',#1084,#1177,#1179,.T.); +#1177 = VERTEX_POINT('',#1178); +#1178 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#1179 = LINE('',#1180,#1181); +#1180 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#1181 = VECTOR('',#1182,1.); +#1182 = DIRECTION('',(1.,0.,0.)); +#1183 = ORIENTED_EDGE('',*,*,#1184,.F.); +#1184 = EDGE_CURVE('',#919,#1177,#1185,.T.); +#1185 = LINE('',#1186,#1187); +#1186 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#1187 = VECTOR('',#1188,1.); +#1188 = DIRECTION('',(0.,0.,1.)); +#1189 = PLANE('',#1190); +#1190 = AXIS2_PLACEMENT_3D('',#1191,#1192,#1193); +#1191 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#1192 = DIRECTION('',(0.,1.,0.)); +#1193 = DIRECTION('',(0.,-0.,1.)); +#1194 = ADVANCED_FACE('',(#1195),#1206,.T.); +#1195 = FACE_BOUND('',#1196,.T.); +#1196 = EDGE_LOOP('',(#1197,#1198,#1199,#1205)); +#1197 = ORIENTED_EDGE('',*,*,#966,.T.); +#1198 = ORIENTED_EDGE('',*,*,#1115,.T.); +#1199 = ORIENTED_EDGE('',*,*,#1200,.F.); +#1200 = EDGE_CURVE('',#982,#1106,#1201,.T.); +#1201 = LINE('',#1202,#1203); +#1202 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#1203 = VECTOR('',#1204,1.); +#1204 = DIRECTION('',(0.,1.,0.)); +#1205 = ORIENTED_EDGE('',*,*,#991,.F.); +#1206 = CYLINDRICAL_SURFACE('',#1207,4.5E-02); +#1207 = AXIS2_PLACEMENT_3D('',#1208,#1209,#1210); +#1208 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#1209 = DIRECTION('',(0.,1.,0.)); +#1210 = DIRECTION('',(-1.,0.,0.)); +#1211 = ADVANCED_FACE('',(#1212),#1223,.F.); +#1212 = FACE_BOUND('',#1213,.F.); +#1213 = EDGE_LOOP('',(#1214,#1215,#1216,#1217)); +#1214 = ORIENTED_EDGE('',*,*,#1105,.F.); +#1215 = ORIENTED_EDGE('',*,*,#1200,.F.); +#1216 = ORIENTED_EDGE('',*,*,#981,.T.); +#1217 = ORIENTED_EDGE('',*,*,#1218,.T.); +#1218 = EDGE_CURVE('',#984,#1108,#1219,.T.); +#1219 = LINE('',#1220,#1221); +#1220 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#1221 = VECTOR('',#1222,1.); +#1222 = DIRECTION('',(0.,1.,0.)); +#1223 = PLANE('',#1224); +#1224 = AXIS2_PLACEMENT_3D('',#1225,#1226,#1227); +#1225 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#1226 = DIRECTION('',(0.,0.,1.)); +#1227 = DIRECTION('',(1.,0.,-0.)); +#1228 = ADVANCED_FACE('',(#1229),#1240,.T.); +#1229 = FACE_BOUND('',#1230,.T.); +#1230 = EDGE_LOOP('',(#1231,#1232,#1233,#1234)); +#1231 = ORIENTED_EDGE('',*,*,#1035,.T.); +#1232 = ORIENTED_EDGE('',*,*,#1218,.T.); +#1233 = ORIENTED_EDGE('',*,*,#1159,.F.); +#1234 = ORIENTED_EDGE('',*,*,#1235,.F.); +#1235 = EDGE_CURVE('',#1028,#1152,#1236,.T.); +#1236 = LINE('',#1237,#1238); +#1237 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#1238 = VECTOR('',#1239,1.); +#1239 = DIRECTION('',(0.,1.,0.)); +#1240 = CYLINDRICAL_SURFACE('',#1241,4.5E-02); +#1241 = AXIS2_PLACEMENT_3D('',#1242,#1243,#1244); +#1242 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#1243 = DIRECTION('',(0.,1.,0.)); +#1244 = DIRECTION('',(1.,0.,0.)); +#1245 = ADVANCED_FACE('',(#1246),#1257,.T.); +#1246 = FACE_BOUND('',#1247,.T.); +#1247 = EDGE_LOOP('',(#1248,#1249,#1250,#1251)); +#1248 = ORIENTED_EDGE('',*,*,#1027,.F.); +#1249 = ORIENTED_EDGE('',*,*,#1235,.T.); +#1250 = ORIENTED_EDGE('',*,*,#1151,.T.); +#1251 = ORIENTED_EDGE('',*,*,#1252,.F.); +#1252 = EDGE_CURVE('',#1019,#1143,#1253,.T.); +#1253 = LINE('',#1254,#1255); +#1254 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#1255 = VECTOR('',#1256,1.); +#1256 = DIRECTION('',(0.,1.,0.)); +#1257 = PLANE('',#1258); +#1258 = AXIS2_PLACEMENT_3D('',#1259,#1260,#1261); +#1259 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#1260 = DIRECTION('',(1.,0.,0.)); +#1261 = DIRECTION('',(0.,0.,1.)); +#1262 = ADVANCED_FACE('',(#1263),#1274,.T.); +#1263 = FACE_BOUND('',#1264,.T.); +#1264 = EDGE_LOOP('',(#1265,#1266,#1267,#1273)); +#1265 = ORIENTED_EDGE('',*,*,#1252,.T.); +#1266 = ORIENTED_EDGE('',*,*,#1142,.T.); +#1267 = ORIENTED_EDGE('',*,*,#1268,.F.); +#1268 = EDGE_CURVE('',#1011,#1135,#1269,.T.); +#1269 = LINE('',#1270,#1271); +#1270 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#1271 = VECTOR('',#1272,1.); +#1272 = DIRECTION('',(0.,1.,0.)); +#1273 = ORIENTED_EDGE('',*,*,#1018,.F.); +#1274 = CYLINDRICAL_SURFACE('',#1275,4.5E-02); +#1275 = AXIS2_PLACEMENT_3D('',#1276,#1277,#1278); +#1276 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#1277 = DIRECTION('',(0.,1.,0.)); +#1278 = DIRECTION('',(1.,0.,0.)); +#1279 = ADVANCED_FACE('',(#1280),#1291,.T.); +#1280 = FACE_BOUND('',#1281,.T.); +#1281 = EDGE_LOOP('',(#1282,#1283,#1289,#1290)); +#1282 = ORIENTED_EDGE('',*,*,#1134,.F.); +#1283 = ORIENTED_EDGE('',*,*,#1284,.F.); +#1284 = EDGE_CURVE('',#1002,#1126,#1285,.T.); +#1285 = LINE('',#1286,#1287); +#1286 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#1287 = VECTOR('',#1288,1.); +#1288 = DIRECTION('',(0.,1.,0.)); +#1289 = ORIENTED_EDGE('',*,*,#1010,.T.); +#1290 = ORIENTED_EDGE('',*,*,#1268,.T.); +#1291 = PLANE('',#1292); +#1292 = AXIS2_PLACEMENT_3D('',#1293,#1294,#1295); +#1293 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1294 = DIRECTION('',(0.,0.,1.)); +#1295 = DIRECTION('',(1.,0.,-0.)); +#1296 = ADVANCED_FACE('',(#1297),#1308,.T.); +#1297 = FACE_BOUND('',#1298,.T.); +#1298 = EDGE_LOOP('',(#1299,#1300,#1301,#1302)); +#1299 = ORIENTED_EDGE('',*,*,#1001,.T.); +#1300 = ORIENTED_EDGE('',*,*,#1284,.T.); +#1301 = ORIENTED_EDGE('',*,*,#1125,.F.); +#1302 = ORIENTED_EDGE('',*,*,#1303,.F.); +#1303 = EDGE_CURVE('',#836,#919,#1304,.T.); +#1304 = LINE('',#1305,#1306); +#1305 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#1306 = VECTOR('',#1307,1.); +#1307 = DIRECTION('',(0.,1.,0.)); +#1308 = CYLINDRICAL_SURFACE('',#1309,4.5E-02); +#1309 = AXIS2_PLACEMENT_3D('',#1310,#1311,#1312); +#1310 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#1311 = DIRECTION('',(0.,1.,0.)); +#1312 = DIRECTION('',(-1.,0.,0.)); +#1313 = ADVANCED_FACE('',(#1314),#1325,.T.); +#1314 = FACE_BOUND('',#1315,.T.); +#1315 = EDGE_LOOP('',(#1316,#1317,#1318,#1319)); +#1316 = ORIENTED_EDGE('',*,*,#1067,.F.); +#1317 = ORIENTED_EDGE('',*,*,#1303,.T.); +#1318 = ORIENTED_EDGE('',*,*,#1184,.T.); +#1319 = ORIENTED_EDGE('',*,*,#1320,.F.); +#1320 = EDGE_CURVE('',#1060,#1177,#1321,.T.); +#1321 = LINE('',#1322,#1323); +#1322 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#1323 = VECTOR('',#1324,1.); +#1324 = DIRECTION('',(0.,1.,0.)); +#1325 = PLANE('',#1326); +#1326 = AXIS2_PLACEMENT_3D('',#1327,#1328,#1329); +#1327 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#1328 = DIRECTION('',(1.,0.,0.)); +#1329 = DIRECTION('',(0.,0.,1.)); +#1330 = ADVANCED_FACE('',(#1331),#1337,.T.); +#1331 = FACE_BOUND('',#1332,.T.); +#1332 = EDGE_LOOP('',(#1333,#1334,#1335,#1336)); +#1333 = ORIENTED_EDGE('',*,*,#1091,.F.); +#1334 = ORIENTED_EDGE('',*,*,#1059,.T.); +#1335 = ORIENTED_EDGE('',*,*,#1320,.T.); +#1336 = ORIENTED_EDGE('',*,*,#1176,.F.); +#1337 = PLANE('',#1338); +#1338 = AXIS2_PLACEMENT_3D('',#1339,#1340,#1341); +#1339 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#1340 = DIRECTION('',(0.,0.,1.)); +#1341 = DIRECTION('',(1.,0.,-0.)); +#1342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1346)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1343,#1344,#1345)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1343 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1344 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1345 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1346 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#1343, + 'distance_accuracy_value','confusion accuracy'); +#1347 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1348,#1350); +#1348 = ( REPRESENTATION_RELATIONSHIP('','',#551,#528) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1349) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#1349 = ITEM_DEFINED_TRANSFORMATION('','',#11,#529); +#1350 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #1351); +#1351 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:3]','',#523,#546,$ + ); +#1352 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#548)); +#1353 = SHAPE_DEFINITION_REPRESENTATION(#1354,#1360); +#1354 = PRODUCT_DEFINITION_SHAPE('','',#1355); +#1355 = PRODUCT_DEFINITION('design','',#1356,#1359); +#1356 = PRODUCT_DEFINITION_FORMATION('','',#1357); +#1357 = PRODUCT('JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', + 'JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical','',(#1358)); +#1358 = PRODUCT_CONTEXT('',#2,'mechanical'); +#1359 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#1360 = SHAPE_REPRESENTATION('',(#11,#1361),#1365); +#1361 = AXIS2_PLACEMENT_3D('',#1362,#1363,#1364); +#1362 = CARTESIAN_POINT('',(0.,0.,0.)); +#1363 = DIRECTION('',(0.,0.,1.)); +#1364 = DIRECTION('',(1.,0.,-0.)); +#1365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1369)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1366,#1367,#1368)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1366 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1367 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1368 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1369 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#1366, + 'distance_accuracy_value','confusion accuracy'); +#1370 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1371,#1373); +#1371 = ( REPRESENTATION_RELATIONSHIP('','',#1360,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1372) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#1372 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); +#1373 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #1374); +#1374 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','P13','',#5,#1355,$); +#1375 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1357)); +#1376 = SHAPE_DEFINITION_REPRESENTATION(#1377,#1383); +#1377 = PRODUCT_DEFINITION_SHAPE('','',#1378); +#1378 = PRODUCT_DEFINITION('design','',#1379,#1382); +#1379 = PRODUCT_DEFINITION_FORMATION('','',#1380); +#1380 = PRODUCT('JST_B3B_XH_A','JST_B3B_XH_A','',(#1381)); +#1381 = PRODUCT_CONTEXT('',#2,'mechanical'); +#1382 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#1383 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#1384),#4905); +#1384 = MANIFOLD_SOLID_BREP('',#1385); +#1385 = CLOSED_SHELL('',(#1386,#1458,#1497,#1521,#1586,#1610,#1730,#1754 + ,#1819,#1844,#1893,#1910,#1934,#1951,#2121,#2145,#2379,#2403,#2436, + #2460,#2491,#2508,#2541,#2565,#2596,#2613,#2646,#2670,#2701,#2713, + #2746,#2763,#2780,#2792,#2906,#2923,#2940,#2957,#2974,#2991,#3008, + #3025,#3042,#3059,#3076,#3093,#3110,#3127,#3144,#3156,#3173,#3190, + #3207,#3253,#3299,#3345,#3376,#3400,#3424,#3441,#3472,#3496,#3520, + #3537,#3568,#3592,#3616,#3633,#3696,#3720,#3776,#3793,#3824,#3848, + #3872,#3889,#3952,#3976,#4032,#4049,#4080,#4104,#4128,#4145,#4176, + #4200,#4224,#4241,#4272,#4296,#4320,#4337,#4384,#4415,#4427,#4444, + #4470,#4503,#4534,#4558,#4582,#4599,#4646,#4677,#4689,#4706,#4732, + #4765,#4777,#4789,#4801,#4818,#4835,#4847,#4859,#4876,#4893)); +#1386 = ADVANCED_FACE('',(#1387),#1453,.T.); +#1387 = FACE_BOUND('',#1388,.T.); +#1388 = EDGE_LOOP('',(#1389,#1399,#1407,#1415,#1423,#1431,#1439,#1447)); +#1389 = ORIENTED_EDGE('',*,*,#1390,.T.); +#1390 = EDGE_CURVE('',#1391,#1393,#1395,.T.); +#1391 = VERTEX_POINT('',#1392); +#1392 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#1393 = VERTEX_POINT('',#1394); +#1394 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#1395 = LINE('',#1396,#1397); +#1396 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#1397 = VECTOR('',#1398,1.); +#1398 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1399 = ORIENTED_EDGE('',*,*,#1400,.T.); +#1400 = EDGE_CURVE('',#1393,#1401,#1403,.T.); +#1401 = VERTEX_POINT('',#1402); +#1402 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#1403 = LINE('',#1404,#1405); +#1404 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#1405 = VECTOR('',#1406,1.); +#1406 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1407 = ORIENTED_EDGE('',*,*,#1408,.T.); +#1408 = EDGE_CURVE('',#1401,#1409,#1411,.T.); +#1409 = VERTEX_POINT('',#1410); +#1410 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#1411 = LINE('',#1412,#1413); +#1412 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#1413 = VECTOR('',#1414,1.); +#1414 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1415 = ORIENTED_EDGE('',*,*,#1416,.T.); +#1416 = EDGE_CURVE('',#1409,#1417,#1419,.T.); +#1417 = VERTEX_POINT('',#1418); +#1418 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#1419 = LINE('',#1420,#1421); +#1420 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#1421 = VECTOR('',#1422,1.); +#1422 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1423 = ORIENTED_EDGE('',*,*,#1424,.T.); +#1424 = EDGE_CURVE('',#1417,#1425,#1427,.T.); +#1425 = VERTEX_POINT('',#1426); +#1426 = CARTESIAN_POINT('',(6.8,0.5,7.)); +#1427 = LINE('',#1428,#1429); +#1428 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#1429 = VECTOR('',#1430,1.); +#1430 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1431 = ORIENTED_EDGE('',*,*,#1432,.F.); +#1432 = EDGE_CURVE('',#1433,#1425,#1435,.T.); +#1433 = VERTEX_POINT('',#1434); +#1434 = CARTESIAN_POINT('',(6.8,-2.85,7.)); +#1435 = LINE('',#1436,#1437); +#1436 = CARTESIAN_POINT('',(6.8,-2.65,7.)); +#1437 = VECTOR('',#1438,1.); +#1438 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1439 = ORIENTED_EDGE('',*,*,#1440,.F.); +#1440 = EDGE_CURVE('',#1441,#1433,#1443,.T.); +#1441 = VERTEX_POINT('',#1442); +#1442 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#1443 = LINE('',#1444,#1445); +#1444 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#1445 = VECTOR('',#1446,1.); +#1446 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1447 = ORIENTED_EDGE('',*,*,#1448,.F.); +#1448 = EDGE_CURVE('',#1391,#1441,#1449,.T.); +#1449 = LINE('',#1450,#1451); +#1450 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#1451 = VECTOR('',#1452,1.); +#1452 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1453 = PLANE('',#1454); +#1454 = AXIS2_PLACEMENT_3D('',#1455,#1456,#1457); +#1455 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#1456 = DIRECTION('',(0.,0.,1.)); +#1457 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1458 = ADVANCED_FACE('',(#1459),#1492,.T.); +#1459 = FACE_BOUND('',#1460,.T.); +#1460 = EDGE_LOOP('',(#1461,#1471,#1479,#1485,#1486)); +#1461 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1462 = EDGE_CURVE('',#1463,#1465,#1467,.T.); +#1463 = VERTEX_POINT('',#1464); +#1464 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#1465 = VERTEX_POINT('',#1466); +#1466 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#1467 = LINE('',#1468,#1469); +#1468 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#1469 = VECTOR('',#1470,1.); +#1470 = DIRECTION('',(-0.,0.,-1.)); +#1471 = ORIENTED_EDGE('',*,*,#1472,.T.); +#1472 = EDGE_CURVE('',#1465,#1473,#1475,.T.); +#1473 = VERTEX_POINT('',#1474); +#1474 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#1475 = LINE('',#1476,#1477); +#1476 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1477 = VECTOR('',#1478,1.); +#1478 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1479 = ORIENTED_EDGE('',*,*,#1480,.T.); +#1480 = EDGE_CURVE('',#1473,#1393,#1481,.T.); +#1481 = LINE('',#1482,#1483); +#1482 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#1483 = VECTOR('',#1484,1.); +#1484 = DIRECTION('',(0.,0.,1.)); +#1485 = ORIENTED_EDGE('',*,*,#1390,.F.); +#1486 = ORIENTED_EDGE('',*,*,#1487,.T.); +#1487 = EDGE_CURVE('',#1391,#1463,#1488,.T.); +#1488 = LINE('',#1489,#1490); +#1489 = CARTESIAN_POINT('',(1.4,0.5,3.8)); +#1490 = VECTOR('',#1491,1.); +#1491 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#1492 = PLANE('',#1493); +#1493 = AXIS2_PLACEMENT_3D('',#1494,#1495,#1496); +#1494 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1495 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1496 = DIRECTION('',(0.,-0.,1.)); +#1497 = ADVANCED_FACE('',(#1498),#1516,.F.); +#1498 = FACE_BOUND('',#1499,.T.); +#1499 = EDGE_LOOP('',(#1500,#1501,#1502,#1510)); +#1500 = ORIENTED_EDGE('',*,*,#1487,.F.); +#1501 = ORIENTED_EDGE('',*,*,#1448,.T.); +#1502 = ORIENTED_EDGE('',*,*,#1503,.T.); +#1503 = EDGE_CURVE('',#1441,#1504,#1506,.T.); +#1504 = VERTEX_POINT('',#1505); +#1505 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#1506 = LINE('',#1507,#1508); +#1507 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#1508 = VECTOR('',#1509,1.); +#1509 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#1510 = ORIENTED_EDGE('',*,*,#1511,.F.); +#1511 = EDGE_CURVE('',#1463,#1504,#1512,.T.); +#1512 = LINE('',#1513,#1514); +#1513 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#1514 = VECTOR('',#1515,1.); +#1515 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1516 = PLANE('',#1517); +#1517 = AXIS2_PLACEMENT_3D('',#1518,#1519,#1520); +#1518 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#1519 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#1520 = DIRECTION('',(1.224646799147E-16,1.,-2.103984282776E-29)); +#1521 = ADVANCED_FACE('',(#1522),#1581,.F.); +#1522 = FACE_BOUND('',#1523,.F.); +#1523 = EDGE_LOOP('',(#1524,#1534,#1542,#1550,#1558,#1567,#1573,#1574, + #1575)); +#1524 = ORIENTED_EDGE('',*,*,#1525,.F.); +#1525 = EDGE_CURVE('',#1526,#1528,#1530,.T.); +#1526 = VERTEX_POINT('',#1527); +#1527 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1528 = VERTEX_POINT('',#1529); +#1529 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1530 = LINE('',#1531,#1532); +#1531 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1532 = VECTOR('',#1533,1.); +#1533 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1534 = ORIENTED_EDGE('',*,*,#1535,.T.); +#1535 = EDGE_CURVE('',#1526,#1536,#1538,.T.); +#1536 = VERTEX_POINT('',#1537); +#1537 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#1538 = LINE('',#1539,#1540); +#1539 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1540 = VECTOR('',#1541,1.); +#1541 = DIRECTION('',(0.,0.,1.)); +#1542 = ORIENTED_EDGE('',*,*,#1543,.T.); +#1543 = EDGE_CURVE('',#1536,#1544,#1546,.T.); +#1544 = VERTEX_POINT('',#1545); +#1545 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#1546 = LINE('',#1547,#1548); +#1547 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#1548 = VECTOR('',#1549,1.); +#1549 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1550 = ORIENTED_EDGE('',*,*,#1551,.T.); +#1551 = EDGE_CURVE('',#1544,#1552,#1554,.T.); +#1552 = VERTEX_POINT('',#1553); +#1553 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#1554 = LINE('',#1555,#1556); +#1555 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#1556 = VECTOR('',#1557,1.); +#1557 = DIRECTION('',(-0.,0.,-1.)); +#1558 = ORIENTED_EDGE('',*,*,#1559,.F.); +#1559 = EDGE_CURVE('',#1560,#1552,#1562,.T.); +#1560 = VERTEX_POINT('',#1561); +#1561 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#1562 = CIRCLE('',#1563,0.5); +#1563 = AXIS2_PLACEMENT_3D('',#1564,#1565,#1566); +#1564 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#1565 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1566 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1567 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1568 = EDGE_CURVE('',#1560,#1473,#1569,.T.); +#1569 = LINE('',#1570,#1571); +#1570 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#1571 = VECTOR('',#1572,1.); +#1572 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1573 = ORIENTED_EDGE('',*,*,#1480,.T.); +#1574 = ORIENTED_EDGE('',*,*,#1400,.T.); +#1575 = ORIENTED_EDGE('',*,*,#1576,.F.); +#1576 = EDGE_CURVE('',#1528,#1401,#1577,.T.); +#1577 = LINE('',#1578,#1579); +#1578 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1579 = VECTOR('',#1580,1.); +#1580 = DIRECTION('',(0.,0.,1.)); +#1581 = PLANE('',#1582); +#1582 = AXIS2_PLACEMENT_3D('',#1583,#1584,#1585); +#1583 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#1584 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1585 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1586 = ADVANCED_FACE('',(#1587),#1605,.F.); +#1587 = FACE_BOUND('',#1588,.T.); +#1588 = EDGE_LOOP('',(#1589,#1590,#1591,#1599)); +#1589 = ORIENTED_EDGE('',*,*,#1503,.F.); +#1590 = ORIENTED_EDGE('',*,*,#1440,.T.); +#1591 = ORIENTED_EDGE('',*,*,#1592,.T.); +#1592 = EDGE_CURVE('',#1433,#1593,#1595,.T.); +#1593 = VERTEX_POINT('',#1594); +#1594 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#1595 = LINE('',#1596,#1597); +#1596 = CARTESIAN_POINT('',(5.3,-1.35,5.5)); +#1597 = VECTOR('',#1598,1.); +#1598 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#1599 = ORIENTED_EDGE('',*,*,#1600,.F.); +#1600 = EDGE_CURVE('',#1504,#1593,#1601,.T.); +#1601 = LINE('',#1602,#1603); +#1602 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#1603 = VECTOR('',#1604,1.); +#1604 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1605 = PLANE('',#1606); +#1606 = AXIS2_PLACEMENT_3D('',#1607,#1608,#1609); +#1607 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#1608 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#1609 = DIRECTION('',(-1.,1.224646799147E-16,-2.105273685727E-29)); +#1610 = ADVANCED_FACE('',(#1611),#1725,.F.); +#1611 = FACE_BOUND('',#1612,.F.); +#1612 = EDGE_LOOP('',(#1613,#1621,#1622,#1623,#1631,#1639,#1647,#1655, + #1663,#1671,#1679,#1687,#1695,#1703,#1711,#1719)); +#1613 = ORIENTED_EDGE('',*,*,#1614,.F.); +#1614 = EDGE_CURVE('',#1528,#1615,#1617,.T.); +#1615 = VERTEX_POINT('',#1616); +#1616 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#1617 = LINE('',#1618,#1619); +#1618 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1619 = VECTOR('',#1620,1.); +#1620 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1621 = ORIENTED_EDGE('',*,*,#1576,.T.); +#1622 = ORIENTED_EDGE('',*,*,#1408,.T.); +#1623 = ORIENTED_EDGE('',*,*,#1624,.F.); +#1624 = EDGE_CURVE('',#1625,#1409,#1627,.T.); +#1625 = VERTEX_POINT('',#1626); +#1626 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1627 = LINE('',#1628,#1629); +#1628 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1629 = VECTOR('',#1630,1.); +#1630 = DIRECTION('',(0.,0.,1.)); +#1631 = ORIENTED_EDGE('',*,*,#1632,.F.); +#1632 = EDGE_CURVE('',#1633,#1625,#1635,.T.); +#1633 = VERTEX_POINT('',#1634); +#1634 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#1635 = LINE('',#1636,#1637); +#1636 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1637 = VECTOR('',#1638,1.); +#1638 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1639 = ORIENTED_EDGE('',*,*,#1640,.F.); +#1640 = EDGE_CURVE('',#1641,#1633,#1643,.T.); +#1641 = VERTEX_POINT('',#1642); +#1642 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#1643 = LINE('',#1644,#1645); +#1644 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#1645 = VECTOR('',#1646,1.); +#1646 = DIRECTION('',(-0.,0.,-1.)); +#1647 = ORIENTED_EDGE('',*,*,#1648,.T.); +#1648 = EDGE_CURVE('',#1641,#1649,#1651,.T.); +#1649 = VERTEX_POINT('',#1650); +#1650 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#1651 = LINE('',#1652,#1653); +#1652 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#1653 = VECTOR('',#1654,1.); +#1654 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1655 = ORIENTED_EDGE('',*,*,#1656,.T.); +#1656 = EDGE_CURVE('',#1649,#1657,#1659,.T.); +#1657 = VERTEX_POINT('',#1658); +#1658 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#1659 = LINE('',#1660,#1661); +#1660 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#1661 = VECTOR('',#1662,1.); +#1662 = DIRECTION('',(-0.,0.,-1.)); +#1663 = ORIENTED_EDGE('',*,*,#1664,.F.); +#1664 = EDGE_CURVE('',#1665,#1657,#1667,.T.); +#1665 = VERTEX_POINT('',#1666); +#1666 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#1667 = LINE('',#1668,#1669); +#1668 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1669 = VECTOR('',#1670,1.); +#1670 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1671 = ORIENTED_EDGE('',*,*,#1672,.F.); +#1672 = EDGE_CURVE('',#1673,#1665,#1675,.T.); +#1673 = VERTEX_POINT('',#1674); +#1674 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#1675 = LINE('',#1676,#1677); +#1676 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#1677 = VECTOR('',#1678,1.); +#1678 = DIRECTION('',(-0.,0.,-1.)); +#1679 = ORIENTED_EDGE('',*,*,#1680,.T.); +#1680 = EDGE_CURVE('',#1673,#1681,#1683,.T.); +#1681 = VERTEX_POINT('',#1682); +#1682 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#1683 = LINE('',#1684,#1685); +#1684 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#1685 = VECTOR('',#1686,1.); +#1686 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1687 = ORIENTED_EDGE('',*,*,#1688,.T.); +#1688 = EDGE_CURVE('',#1681,#1689,#1691,.T.); +#1689 = VERTEX_POINT('',#1690); +#1690 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#1691 = LINE('',#1692,#1693); +#1692 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#1693 = VECTOR('',#1694,1.); +#1694 = DIRECTION('',(-0.,0.,-1.)); +#1695 = ORIENTED_EDGE('',*,*,#1696,.F.); +#1696 = EDGE_CURVE('',#1697,#1689,#1699,.T.); +#1697 = VERTEX_POINT('',#1698); +#1698 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#1699 = LINE('',#1700,#1701); +#1700 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1701 = VECTOR('',#1702,1.); +#1702 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1703 = ORIENTED_EDGE('',*,*,#1704,.F.); +#1704 = EDGE_CURVE('',#1705,#1697,#1707,.T.); +#1705 = VERTEX_POINT('',#1706); +#1706 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#1707 = LINE('',#1708,#1709); +#1708 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#1709 = VECTOR('',#1710,1.); +#1710 = DIRECTION('',(-0.,0.,-1.)); +#1711 = ORIENTED_EDGE('',*,*,#1712,.T.); +#1712 = EDGE_CURVE('',#1705,#1713,#1715,.T.); +#1713 = VERTEX_POINT('',#1714); +#1714 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#1715 = LINE('',#1716,#1717); +#1716 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#1717 = VECTOR('',#1718,1.); +#1718 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1719 = ORIENTED_EDGE('',*,*,#1720,.T.); +#1720 = EDGE_CURVE('',#1713,#1615,#1721,.T.); +#1721 = LINE('',#1722,#1723); +#1722 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#1723 = VECTOR('',#1724,1.); +#1724 = DIRECTION('',(-0.,0.,-1.)); +#1725 = PLANE('',#1726); +#1726 = AXIS2_PLACEMENT_3D('',#1727,#1728,#1729); +#1727 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#1728 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1729 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1730 = ADVANCED_FACE('',(#1731),#1749,.F.); +#1731 = FACE_BOUND('',#1732,.T.); +#1732 = EDGE_LOOP('',(#1733,#1734,#1735,#1743)); +#1733 = ORIENTED_EDGE('',*,*,#1592,.F.); +#1734 = ORIENTED_EDGE('',*,*,#1432,.T.); +#1735 = ORIENTED_EDGE('',*,*,#1736,.T.); +#1736 = EDGE_CURVE('',#1425,#1737,#1739,.T.); +#1737 = VERTEX_POINT('',#1738); +#1738 = CARTESIAN_POINT('',(6.6,0.5,6.8)); +#1739 = LINE('',#1740,#1741); +#1740 = CARTESIAN_POINT('',(6.075,0.5,6.275)); +#1741 = VECTOR('',#1742,1.); +#1742 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#1743 = ORIENTED_EDGE('',*,*,#1744,.F.); +#1744 = EDGE_CURVE('',#1593,#1737,#1745,.T.); +#1745 = LINE('',#1746,#1747); +#1746 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#1747 = VECTOR('',#1748,1.); +#1748 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1749 = PLANE('',#1750); +#1750 = AXIS2_PLACEMENT_3D('',#1751,#1752,#1753); +#1751 = CARTESIAN_POINT('',(6.7,-2.65,6.9)); +#1752 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#1753 = DIRECTION('',(-1.224646799147E-16,-1.,-2.103984282776E-29)); +#1754 = ADVANCED_FACE('',(#1755),#1814,.F.); +#1755 = FACE_BOUND('',#1756,.F.); +#1756 = EDGE_LOOP('',(#1757,#1765,#1766,#1767,#1775,#1783,#1792,#1800, + #1808)); +#1757 = ORIENTED_EDGE('',*,*,#1758,.F.); +#1758 = EDGE_CURVE('',#1625,#1759,#1761,.T.); +#1759 = VERTEX_POINT('',#1760); +#1760 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#1761 = LINE('',#1762,#1763); +#1762 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1763 = VECTOR('',#1764,1.); +#1764 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1765 = ORIENTED_EDGE('',*,*,#1624,.T.); +#1766 = ORIENTED_EDGE('',*,*,#1416,.T.); +#1767 = ORIENTED_EDGE('',*,*,#1768,.F.); +#1768 = EDGE_CURVE('',#1769,#1417,#1771,.T.); +#1769 = VERTEX_POINT('',#1770); +#1770 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1771 = LINE('',#1772,#1773); +#1772 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1773 = VECTOR('',#1774,1.); +#1774 = DIRECTION('',(0.,0.,1.)); +#1775 = ORIENTED_EDGE('',*,*,#1776,.F.); +#1776 = EDGE_CURVE('',#1777,#1769,#1779,.T.); +#1777 = VERTEX_POINT('',#1778); +#1778 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1779 = LINE('',#1780,#1781); +#1780 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1781 = VECTOR('',#1782,1.); +#1782 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1783 = ORIENTED_EDGE('',*,*,#1784,.F.); +#1784 = EDGE_CURVE('',#1785,#1777,#1787,.T.); +#1785 = VERTEX_POINT('',#1786); +#1786 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#1787 = CIRCLE('',#1788,0.5); +#1788 = AXIS2_PLACEMENT_3D('',#1789,#1790,#1791); +#1789 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#1790 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1791 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1792 = ORIENTED_EDGE('',*,*,#1793,.F.); +#1793 = EDGE_CURVE('',#1794,#1785,#1796,.T.); +#1794 = VERTEX_POINT('',#1795); +#1795 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#1796 = LINE('',#1797,#1798); +#1797 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#1798 = VECTOR('',#1799,1.); +#1799 = DIRECTION('',(-0.,0.,-1.)); +#1800 = ORIENTED_EDGE('',*,*,#1801,.T.); +#1801 = EDGE_CURVE('',#1794,#1802,#1804,.T.); +#1802 = VERTEX_POINT('',#1803); +#1803 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#1804 = LINE('',#1805,#1806); +#1805 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#1806 = VECTOR('',#1807,1.); +#1807 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1808 = ORIENTED_EDGE('',*,*,#1809,.F.); +#1809 = EDGE_CURVE('',#1759,#1802,#1810,.T.); +#1810 = LINE('',#1811,#1812); +#1811 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#1812 = VECTOR('',#1813,1.); +#1813 = DIRECTION('',(0.,0.,1.)); +#1814 = PLANE('',#1815); +#1815 = AXIS2_PLACEMENT_3D('',#1816,#1817,#1818); +#1816 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#1817 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1818 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1819 = ADVANCED_FACE('',(#1820),#1839,.T.); +#1820 = FACE_BOUND('',#1821,.T.); +#1821 = EDGE_LOOP('',(#1822,#1823,#1824,#1832,#1838)); +#1822 = ORIENTED_EDGE('',*,*,#1424,.F.); +#1823 = ORIENTED_EDGE('',*,*,#1768,.F.); +#1824 = ORIENTED_EDGE('',*,*,#1825,.T.); +#1825 = EDGE_CURVE('',#1769,#1826,#1828,.T.); +#1826 = VERTEX_POINT('',#1827); +#1827 = CARTESIAN_POINT('',(6.6,0.5,3.65)); +#1828 = LINE('',#1829,#1830); +#1829 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1830 = VECTOR('',#1831,1.); +#1831 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1832 = ORIENTED_EDGE('',*,*,#1833,.T.); +#1833 = EDGE_CURVE('',#1826,#1737,#1834,.T.); +#1834 = LINE('',#1835,#1836); +#1835 = CARTESIAN_POINT('',(6.6,0.5,5.325)); +#1836 = VECTOR('',#1837,1.); +#1837 = DIRECTION('',(0.,0.,1.)); +#1838 = ORIENTED_EDGE('',*,*,#1736,.F.); +#1839 = PLANE('',#1840); +#1840 = AXIS2_PLACEMENT_3D('',#1841,#1842,#1843); +#1841 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#1842 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1843 = DIRECTION('',(0.,-0.,1.)); +#1844 = ADVANCED_FACE('',(#1845),#1888,.F.); +#1845 = FACE_BOUND('',#1846,.F.); +#1846 = EDGE_LOOP('',(#1847,#1848,#1856,#1865,#1873,#1881,#1887)); +#1847 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1848 = ORIENTED_EDGE('',*,*,#1849,.T.); +#1849 = EDGE_CURVE('',#1465,#1850,#1852,.T.); +#1850 = VERTEX_POINT('',#1851); +#1851 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#1852 = LINE('',#1853,#1854); +#1853 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#1854 = VECTOR('',#1855,1.); +#1855 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1856 = ORIENTED_EDGE('',*,*,#1857,.T.); +#1857 = EDGE_CURVE('',#1850,#1858,#1860,.T.); +#1858 = VERTEX_POINT('',#1859); +#1859 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#1860 = CIRCLE('',#1861,0.5); +#1861 = AXIS2_PLACEMENT_3D('',#1862,#1863,#1864); +#1862 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#1863 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1864 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1865 = ORIENTED_EDGE('',*,*,#1866,.T.); +#1866 = EDGE_CURVE('',#1858,#1867,#1869,.T.); +#1867 = VERTEX_POINT('',#1868); +#1868 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#1869 = LINE('',#1870,#1871); +#1870 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#1871 = VECTOR('',#1872,1.); +#1872 = DIRECTION('',(0.,0.,-1.)); +#1873 = ORIENTED_EDGE('',*,*,#1874,.T.); +#1874 = EDGE_CURVE('',#1867,#1875,#1877,.T.); +#1875 = VERTEX_POINT('',#1876); +#1876 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#1877 = LINE('',#1878,#1879); +#1878 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#1879 = VECTOR('',#1880,1.); +#1880 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1881 = ORIENTED_EDGE('',*,*,#1882,.F.); +#1882 = EDGE_CURVE('',#1504,#1875,#1883,.T.); +#1883 = LINE('',#1884,#1885); +#1884 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#1885 = VECTOR('',#1886,1.); +#1886 = DIRECTION('',(0.,0.,-1.)); +#1887 = ORIENTED_EDGE('',*,*,#1511,.F.); +#1888 = PLANE('',#1889); +#1889 = AXIS2_PLACEMENT_3D('',#1890,#1891,#1892); +#1890 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#1891 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1892 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1893 = ADVANCED_FACE('',(#1894),#1905,.T.); +#1894 = FACE_BOUND('',#1895,.T.); +#1895 = EDGE_LOOP('',(#1896,#1897,#1903,#1904)); +#1896 = ORIENTED_EDGE('',*,*,#1849,.T.); +#1897 = ORIENTED_EDGE('',*,*,#1898,.T.); +#1898 = EDGE_CURVE('',#1850,#1560,#1899,.T.); +#1899 = LINE('',#1900,#1901); +#1900 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1901 = VECTOR('',#1902,1.); +#1902 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1903 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1904 = ORIENTED_EDGE('',*,*,#1472,.F.); +#1905 = PLANE('',#1906); +#1906 = AXIS2_PLACEMENT_3D('',#1907,#1908,#1909); +#1907 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#1908 = DIRECTION('',(0.,0.,1.)); +#1909 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1910 = ADVANCED_FACE('',(#1911),#1929,.F.); +#1911 = FACE_BOUND('',#1912,.F.); +#1912 = EDGE_LOOP('',(#1913,#1914,#1915,#1923)); +#1913 = ORIENTED_EDGE('',*,*,#1525,.T.); +#1914 = ORIENTED_EDGE('',*,*,#1614,.T.); +#1915 = ORIENTED_EDGE('',*,*,#1916,.T.); +#1916 = EDGE_CURVE('',#1615,#1917,#1919,.T.); +#1917 = VERTEX_POINT('',#1918); +#1918 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#1919 = LINE('',#1920,#1921); +#1920 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#1921 = VECTOR('',#1922,1.); +#1922 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1923 = ORIENTED_EDGE('',*,*,#1924,.T.); +#1924 = EDGE_CURVE('',#1917,#1526,#1925,.T.); +#1925 = LINE('',#1926,#1927); +#1926 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#1927 = VECTOR('',#1928,1.); +#1928 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1929 = PLANE('',#1930); +#1930 = AXIS2_PLACEMENT_3D('',#1931,#1932,#1933); +#1931 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#1932 = DIRECTION('',(0.,0.,1.)); +#1933 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1934 = ADVANCED_FACE('',(#1935),#1946,.F.); +#1935 = FACE_BOUND('',#1936,.F.); +#1936 = EDGE_LOOP('',(#1937,#1938,#1939,#1945)); +#1937 = ORIENTED_EDGE('',*,*,#1898,.T.); +#1938 = ORIENTED_EDGE('',*,*,#1559,.T.); +#1939 = ORIENTED_EDGE('',*,*,#1940,.F.); +#1940 = EDGE_CURVE('',#1858,#1552,#1941,.T.); +#1941 = LINE('',#1942,#1943); +#1942 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#1943 = VECTOR('',#1944,1.); +#1944 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1945 = ORIENTED_EDGE('',*,*,#1857,.F.); +#1946 = CYLINDRICAL_SURFACE('',#1947,0.5); +#1947 = AXIS2_PLACEMENT_3D('',#1948,#1949,#1950); +#1948 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#1949 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#1950 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1951 = ADVANCED_FACE('',(#1952),#2116,.T.); +#1952 = FACE_BOUND('',#1953,.T.); +#1953 = EDGE_LOOP('',(#1954,#1955,#1963,#1971,#1979,#1987,#1995,#2004, + #2012,#2020,#2028,#2036,#2044,#2053,#2061,#2069,#2077,#2085,#2091, + #2092,#2093,#2094,#2102,#2110)); +#1954 = ORIENTED_EDGE('',*,*,#1793,.F.); +#1955 = ORIENTED_EDGE('',*,*,#1956,.T.); +#1956 = EDGE_CURVE('',#1794,#1957,#1959,.T.); +#1957 = VERTEX_POINT('',#1958); +#1958 = CARTESIAN_POINT('',(5.5,1.5,7.)); +#1959 = LINE('',#1960,#1961); +#1960 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#1961 = VECTOR('',#1962,1.); +#1962 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1963 = ORIENTED_EDGE('',*,*,#1964,.T.); +#1964 = EDGE_CURVE('',#1957,#1965,#1967,.T.); +#1965 = VERTEX_POINT('',#1966); +#1966 = CARTESIAN_POINT('',(5.5,1.5,6.1)); +#1967 = LINE('',#1968,#1969); +#1968 = CARTESIAN_POINT('',(5.5,1.5,5.327450166113)); +#1969 = VECTOR('',#1970,1.); +#1970 = DIRECTION('',(-4.93432455389E-16,8.449221308824E-17,-1.)); +#1971 = ORIENTED_EDGE('',*,*,#1972,.T.); +#1972 = EDGE_CURVE('',#1965,#1973,#1975,.T.); +#1973 = VERTEX_POINT('',#1974); +#1974 = CARTESIAN_POINT('',(5.25,1.5,5.85)); +#1975 = LINE('',#1976,#1977); +#1976 = CARTESIAN_POINT('',(4.238725083056,1.5,4.838725083056)); +#1977 = VECTOR('',#1978,1.); +#1978 = DIRECTION('',(-0.707106781187,1.463406224556E-16,-0.707106781187 + )); +#1979 = ORIENTED_EDGE('',*,*,#1980,.T.); +#1980 = EDGE_CURVE('',#1973,#1981,#1983,.T.); +#1981 = VERTEX_POINT('',#1982); +#1982 = CARTESIAN_POINT('',(5.5,1.5,5.6)); +#1983 = LINE('',#1984,#1985); +#1984 = CARTESIAN_POINT('',(5.011274916944,1.5,6.088725083056)); +#1985 = VECTOR('',#1986,1.); +#1986 = DIRECTION('',(0.707106781187,-2.685058879138E-17,-0.707106781187 + )); +#1987 = ORIENTED_EDGE('',*,*,#1988,.T.); +#1988 = EDGE_CURVE('',#1981,#1989,#1991,.T.); +#1989 = VERTEX_POINT('',#1990); +#1990 = CARTESIAN_POINT('',(5.5,1.5,3.85)); +#1991 = LINE('',#1992,#1993); +#1992 = CARTESIAN_POINT('',(5.5,1.5,3.827450166113)); +#1993 = VECTOR('',#1994,1.); +#1994 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#1995 = ORIENTED_EDGE('',*,*,#1996,.F.); +#1996 = EDGE_CURVE('',#1997,#1989,#1999,.T.); +#1997 = VERTEX_POINT('',#1998); +#1998 = CARTESIAN_POINT('',(4.75,1.5,3.1)); +#1999 = CIRCLE('',#2000,0.75); +#2000 = AXIS2_PLACEMENT_3D('',#2001,#2002,#2003); +#2001 = CARTESIAN_POINT('',(4.75,1.5,3.85)); +#2002 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2003 = DIRECTION('',(-0.,0.,-1.)); +#2004 = ORIENTED_EDGE('',*,*,#2005,.T.); +#2005 = EDGE_CURVE('',#1997,#2006,#2008,.T.); +#2006 = VERTEX_POINT('',#2007); +#2007 = CARTESIAN_POINT('',(4.,1.5,3.1)); +#2008 = LINE('',#2009,#2010); +#2009 = CARTESIAN_POINT('',(3.25,1.5,3.1)); +#2010 = VECTOR('',#2011,1.); +#2011 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2012 = ORIENTED_EDGE('',*,*,#2013,.T.); +#2013 = EDGE_CURVE('',#2006,#2014,#2016,.T.); +#2014 = VERTEX_POINT('',#2015); +#2015 = CARTESIAN_POINT('',(4.,1.5,7.)); +#2016 = LINE('',#2017,#2018); +#2017 = CARTESIAN_POINT('',(4.,1.5,5.777450166113)); +#2018 = VECTOR('',#2019,1.); +#2019 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#2020 = ORIENTED_EDGE('',*,*,#2021,.T.); +#2021 = EDGE_CURVE('',#2014,#2022,#2024,.T.); +#2022 = VERTEX_POINT('',#2023); +#2023 = CARTESIAN_POINT('',(1.,1.5,7.)); +#2024 = LINE('',#2025,#2026); +#2025 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#2026 = VECTOR('',#2027,1.); +#2027 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2028 = ORIENTED_EDGE('',*,*,#2029,.F.); +#2029 = EDGE_CURVE('',#2030,#2022,#2032,.T.); +#2030 = VERTEX_POINT('',#2031); +#2031 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#2032 = LINE('',#2033,#2034); +#2033 = CARTESIAN_POINT('',(1.,1.5,5.777450166113)); +#2034 = VECTOR('',#2035,1.); +#2035 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#2036 = ORIENTED_EDGE('',*,*,#2037,.F.); +#2037 = EDGE_CURVE('',#2038,#2030,#2040,.T.); +#2038 = VERTEX_POINT('',#2039); +#2039 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#2040 = LINE('',#2041,#2042); +#2041 = CARTESIAN_POINT('',(1.75,1.5,3.1)); +#2042 = VECTOR('',#2043,1.); +#2043 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#2044 = ORIENTED_EDGE('',*,*,#2045,.F.); +#2045 = EDGE_CURVE('',#2046,#2038,#2048,.T.); +#2046 = VERTEX_POINT('',#2047); +#2047 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#2048 = CIRCLE('',#2049,0.75); +#2049 = AXIS2_PLACEMENT_3D('',#2050,#2051,#2052); +#2050 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#2051 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2052 = DIRECTION('',(-0.,0.,-1.)); +#2053 = ORIENTED_EDGE('',*,*,#2054,.F.); +#2054 = EDGE_CURVE('',#2055,#2046,#2057,.T.); +#2055 = VERTEX_POINT('',#2056); +#2056 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#2057 = LINE('',#2058,#2059); +#2058 = CARTESIAN_POINT('',(-0.5,1.5,3.827450166113)); +#2059 = VECTOR('',#2060,1.); +#2060 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#2061 = ORIENTED_EDGE('',*,*,#2062,.F.); +#2062 = EDGE_CURVE('',#2063,#2055,#2065,.T.); +#2063 = VERTEX_POINT('',#2064); +#2064 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#2065 = LINE('',#2066,#2067); +#2066 = CARTESIAN_POINT('',(-1.127491694352E-02,1.5,6.088725083056)); +#2067 = VECTOR('',#2068,1.); +#2068 = DIRECTION('',(-0.707106781187,1.463406224556E-16,-0.707106781187 + )); +#2069 = ORIENTED_EDGE('',*,*,#2070,.F.); +#2070 = EDGE_CURVE('',#2071,#2063,#2073,.T.); +#2071 = VERTEX_POINT('',#2072); +#2072 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#2073 = LINE('',#2074,#2075); +#2074 = CARTESIAN_POINT('',(0.761274916944,1.5,4.838725083056)); +#2075 = VECTOR('',#2076,1.); +#2076 = DIRECTION('',(0.707106781187,-2.685058879138E-17,-0.707106781187 + )); +#2077 = ORIENTED_EDGE('',*,*,#2078,.F.); +#2078 = EDGE_CURVE('',#2079,#2071,#2081,.T.); +#2079 = VERTEX_POINT('',#2080); +#2080 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#2081 = LINE('',#2082,#2083); +#2082 = CARTESIAN_POINT('',(-0.5,1.5,5.327450166113)); +#2083 = VECTOR('',#2084,1.); +#2084 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#2085 = ORIENTED_EDGE('',*,*,#2086,.T.); +#2086 = EDGE_CURVE('',#2079,#1544,#2087,.T.); +#2087 = LINE('',#2088,#2089); +#2088 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#2089 = VECTOR('',#2090,1.); +#2090 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2091 = ORIENTED_EDGE('',*,*,#1551,.T.); +#2092 = ORIENTED_EDGE('',*,*,#1940,.F.); +#2093 = ORIENTED_EDGE('',*,*,#1866,.T.); +#2094 = ORIENTED_EDGE('',*,*,#2095,.F.); +#2095 = EDGE_CURVE('',#2096,#1867,#2098,.T.); +#2096 = VERTEX_POINT('',#2097); +#2097 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#2098 = LINE('',#2099,#2100); +#2099 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#2100 = VECTOR('',#2101,1.); +#2101 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2102 = ORIENTED_EDGE('',*,*,#2103,.F.); +#2103 = EDGE_CURVE('',#2104,#2096,#2106,.T.); +#2104 = VERTEX_POINT('',#2105); +#2105 = CARTESIAN_POINT('',(6.6,1.5,4.15)); +#2106 = LINE('',#2107,#2108); +#2107 = CARTESIAN_POINT('',(6.6,1.5,7.)); +#2108 = VECTOR('',#2109,1.); +#2109 = DIRECTION('',(0.,0.,-1.)); +#2110 = ORIENTED_EDGE('',*,*,#2111,.F.); +#2111 = EDGE_CURVE('',#1785,#2104,#2112,.T.); +#2112 = LINE('',#2113,#2114); +#2113 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#2114 = VECTOR('',#2115,1.); +#2115 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2116 = PLANE('',#2117); +#2117 = AXIS2_PLACEMENT_3D('',#2118,#2119,#2120); +#2118 = CARTESIAN_POINT('',(2.5,1.5,4.554900332226)); +#2119 = DIRECTION('',(-1.224646799147E-16,-1.,-8.449221308824E-17)); +#2120 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#2121 = ADVANCED_FACE('',(#2122),#2140,.T.); +#2122 = FACE_BOUND('',#2123,.T.); +#2123 = EDGE_LOOP('',(#2124,#2125,#2133,#2139)); +#2124 = ORIENTED_EDGE('',*,*,#2086,.F.); +#2125 = ORIENTED_EDGE('',*,*,#2126,.F.); +#2126 = EDGE_CURVE('',#2127,#2079,#2129,.T.); +#2127 = VERTEX_POINT('',#2128); +#2128 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#2129 = LINE('',#2130,#2131); +#2130 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#2131 = VECTOR('',#2132,1.); +#2132 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2133 = ORIENTED_EDGE('',*,*,#2134,.T.); +#2134 = EDGE_CURVE('',#2127,#1536,#2135,.T.); +#2135 = LINE('',#2136,#2137); +#2136 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#2137 = VECTOR('',#2138,1.); +#2138 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2139 = ORIENTED_EDGE('',*,*,#1543,.T.); +#2140 = PLANE('',#2141); +#2141 = AXIS2_PLACEMENT_3D('',#2142,#2143,#2144); +#2142 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#2143 = DIRECTION('',(0.,0.,1.)); +#2144 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2145 = ADVANCED_FACE('',(#2146),#2374,.F.); +#2146 = FACE_BOUND('',#2147,.F.); +#2147 = EDGE_LOOP('',(#2148,#2156,#2157,#2165,#2173,#2181,#2189,#2197, + #2206,#2214,#2222,#2230,#2238,#2246,#2255,#2263,#2271,#2279,#2285, + #2286,#2287,#2288,#2296,#2304,#2312,#2320,#2328,#2336,#2344,#2352, + #2360,#2368)); +#2148 = ORIENTED_EDGE('',*,*,#2149,.F.); +#2149 = EDGE_CURVE('',#1759,#2150,#2152,.T.); +#2150 = VERTEX_POINT('',#2151); +#2151 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#2152 = LINE('',#2153,#2154); +#2153 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2154 = VECTOR('',#2155,1.); +#2155 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2156 = ORIENTED_EDGE('',*,*,#1809,.T.); +#2157 = ORIENTED_EDGE('',*,*,#2158,.T.); +#2158 = EDGE_CURVE('',#1802,#2159,#2161,.T.); +#2159 = VERTEX_POINT('',#2160); +#2160 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#2161 = LINE('',#2162,#2163); +#2162 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#2163 = VECTOR('',#2164,1.); +#2164 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2165 = ORIENTED_EDGE('',*,*,#2166,.F.); +#2166 = EDGE_CURVE('',#2167,#2159,#2169,.T.); +#2167 = VERTEX_POINT('',#2168); +#2168 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#2169 = LINE('',#2170,#2171); +#2170 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#2171 = VECTOR('',#2172,1.); +#2172 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#2173 = ORIENTED_EDGE('',*,*,#2174,.F.); +#2174 = EDGE_CURVE('',#2175,#2167,#2177,.T.); +#2175 = VERTEX_POINT('',#2176); +#2176 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#2177 = LINE('',#2178,#2179); +#2178 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#2179 = VECTOR('',#2180,1.); +#2180 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#2181 = ORIENTED_EDGE('',*,*,#2182,.F.); +#2182 = EDGE_CURVE('',#2183,#2175,#2185,.T.); +#2183 = VERTEX_POINT('',#2184); +#2184 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#2185 = LINE('',#2186,#2187); +#2186 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#2187 = VECTOR('',#2188,1.); +#2188 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2189 = ORIENTED_EDGE('',*,*,#2190,.F.); +#2190 = EDGE_CURVE('',#2191,#2183,#2193,.T.); +#2191 = VERTEX_POINT('',#2192); +#2192 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#2193 = LINE('',#2194,#2195); +#2194 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#2195 = VECTOR('',#2196,1.); +#2196 = DIRECTION('',(0.,0.,1.)); +#2197 = ORIENTED_EDGE('',*,*,#2198,.F.); +#2198 = EDGE_CURVE('',#2199,#2191,#2201,.T.); +#2199 = VERTEX_POINT('',#2200); +#2200 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#2201 = CIRCLE('',#2202,0.75); +#2202 = AXIS2_PLACEMENT_3D('',#2203,#2204,#2205); +#2203 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#2204 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2205 = DIRECTION('',(0.,0.,1.)); +#2206 = ORIENTED_EDGE('',*,*,#2207,.F.); +#2207 = EDGE_CURVE('',#2208,#2199,#2210,.T.); +#2208 = VERTEX_POINT('',#2209); +#2209 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#2210 = LINE('',#2211,#2212); +#2211 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#2212 = VECTOR('',#2213,1.); +#2213 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2214 = ORIENTED_EDGE('',*,*,#2215,.F.); +#2215 = EDGE_CURVE('',#2216,#2208,#2218,.T.); +#2216 = VERTEX_POINT('',#2217); +#2217 = CARTESIAN_POINT('',(4.,2.35,7.)); +#2218 = LINE('',#2219,#2220); +#2219 = CARTESIAN_POINT('',(4.,2.35,7.)); +#2220 = VECTOR('',#2221,1.); +#2221 = DIRECTION('',(-0.,0.,-1.)); +#2222 = ORIENTED_EDGE('',*,*,#2223,.T.); +#2223 = EDGE_CURVE('',#2216,#2224,#2226,.T.); +#2224 = VERTEX_POINT('',#2225); +#2225 = CARTESIAN_POINT('',(1.,2.35,7.)); +#2226 = LINE('',#2227,#2228); +#2227 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#2228 = VECTOR('',#2229,1.); +#2229 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2230 = ORIENTED_EDGE('',*,*,#2231,.T.); +#2231 = EDGE_CURVE('',#2224,#2232,#2234,.T.); +#2232 = VERTEX_POINT('',#2233); +#2233 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#2234 = LINE('',#2235,#2236); +#2235 = CARTESIAN_POINT('',(1.,2.35,7.)); +#2236 = VECTOR('',#2237,1.); +#2237 = DIRECTION('',(-0.,0.,-1.)); +#2238 = ORIENTED_EDGE('',*,*,#2239,.T.); +#2239 = EDGE_CURVE('',#2232,#2240,#2242,.T.); +#2240 = VERTEX_POINT('',#2241); +#2241 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#2242 = LINE('',#2243,#2244); +#2243 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#2244 = VECTOR('',#2245,1.); +#2245 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2246 = ORIENTED_EDGE('',*,*,#2247,.T.); +#2247 = EDGE_CURVE('',#2240,#2248,#2250,.T.); +#2248 = VERTEX_POINT('',#2249); +#2249 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#2250 = CIRCLE('',#2251,0.75); +#2251 = AXIS2_PLACEMENT_3D('',#2252,#2253,#2254); +#2252 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#2253 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#2254 = DIRECTION('',(0.,0.,1.)); +#2255 = ORIENTED_EDGE('',*,*,#2256,.T.); +#2256 = EDGE_CURVE('',#2248,#2257,#2259,.T.); +#2257 = VERTEX_POINT('',#2258); +#2258 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2259 = LINE('',#2260,#2261); +#2260 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#2261 = VECTOR('',#2262,1.); +#2262 = DIRECTION('',(0.,0.,1.)); +#2263 = ORIENTED_EDGE('',*,*,#2264,.T.); +#2264 = EDGE_CURVE('',#2257,#2265,#2267,.T.); +#2265 = VERTEX_POINT('',#2266); +#2266 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2267 = LINE('',#2268,#2269); +#2268 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2269 = VECTOR('',#2270,1.); +#2270 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#2271 = ORIENTED_EDGE('',*,*,#2272,.T.); +#2272 = EDGE_CURVE('',#2265,#2273,#2275,.T.); +#2273 = VERTEX_POINT('',#2274); +#2274 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2275 = LINE('',#2276,#2277); +#2276 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2277 = VECTOR('',#2278,1.); +#2278 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2279 = ORIENTED_EDGE('',*,*,#2280,.T.); +#2280 = EDGE_CURVE('',#2273,#2127,#2281,.T.); +#2281 = LINE('',#2282,#2283); +#2282 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2283 = VECTOR('',#2284,1.); +#2284 = DIRECTION('',(0.,0.,1.)); +#2285 = ORIENTED_EDGE('',*,*,#2134,.T.); +#2286 = ORIENTED_EDGE('',*,*,#1535,.F.); +#2287 = ORIENTED_EDGE('',*,*,#1924,.F.); +#2288 = ORIENTED_EDGE('',*,*,#2289,.T.); +#2289 = EDGE_CURVE('',#1917,#2290,#2292,.T.); +#2290 = VERTEX_POINT('',#2291); +#2291 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#2292 = LINE('',#2293,#2294); +#2293 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#2294 = VECTOR('',#2295,1.); +#2295 = DIRECTION('',(0.,0.,1.)); +#2296 = ORIENTED_EDGE('',*,*,#2297,.F.); +#2297 = EDGE_CURVE('',#2298,#2290,#2300,.T.); +#2298 = VERTEX_POINT('',#2299); +#2299 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#2300 = LINE('',#2301,#2302); +#2301 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#2302 = VECTOR('',#2303,1.); +#2303 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2304 = ORIENTED_EDGE('',*,*,#2305,.F.); +#2305 = EDGE_CURVE('',#2306,#2298,#2308,.T.); +#2306 = VERTEX_POINT('',#2307); +#2307 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#2308 = LINE('',#2309,#2310); +#2309 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#2310 = VECTOR('',#2311,1.); +#2311 = DIRECTION('',(0.,0.,1.)); +#2312 = ORIENTED_EDGE('',*,*,#2313,.F.); +#2313 = EDGE_CURVE('',#2314,#2306,#2316,.T.); +#2314 = VERTEX_POINT('',#2315); +#2315 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#2316 = LINE('',#2317,#2318); +#2317 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2318 = VECTOR('',#2319,1.); +#2319 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2320 = ORIENTED_EDGE('',*,*,#2321,.T.); +#2321 = EDGE_CURVE('',#2314,#2322,#2324,.T.); +#2322 = VERTEX_POINT('',#2323); +#2323 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#2324 = LINE('',#2325,#2326); +#2325 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#2326 = VECTOR('',#2327,1.); +#2327 = DIRECTION('',(0.,0.,1.)); +#2328 = ORIENTED_EDGE('',*,*,#2329,.F.); +#2329 = EDGE_CURVE('',#2330,#2322,#2332,.T.); +#2330 = VERTEX_POINT('',#2331); +#2331 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#2332 = LINE('',#2333,#2334); +#2333 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#2334 = VECTOR('',#2335,1.); +#2335 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2336 = ORIENTED_EDGE('',*,*,#2337,.F.); +#2337 = EDGE_CURVE('',#2338,#2330,#2340,.T.); +#2338 = VERTEX_POINT('',#2339); +#2339 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#2340 = LINE('',#2341,#2342); +#2341 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#2342 = VECTOR('',#2343,1.); +#2343 = DIRECTION('',(0.,0.,1.)); +#2344 = ORIENTED_EDGE('',*,*,#2345,.F.); +#2345 = EDGE_CURVE('',#2346,#2338,#2348,.T.); +#2346 = VERTEX_POINT('',#2347); +#2347 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#2348 = LINE('',#2349,#2350); +#2349 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2350 = VECTOR('',#2351,1.); +#2351 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2352 = ORIENTED_EDGE('',*,*,#2353,.T.); +#2353 = EDGE_CURVE('',#2346,#2354,#2356,.T.); +#2354 = VERTEX_POINT('',#2355); +#2355 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#2356 = LINE('',#2357,#2358); +#2357 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#2358 = VECTOR('',#2359,1.); +#2359 = DIRECTION('',(0.,0.,1.)); +#2360 = ORIENTED_EDGE('',*,*,#2361,.F.); +#2361 = EDGE_CURVE('',#2362,#2354,#2364,.T.); +#2362 = VERTEX_POINT('',#2363); +#2363 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#2364 = LINE('',#2365,#2366); +#2365 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#2366 = VECTOR('',#2367,1.); +#2367 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2368 = ORIENTED_EDGE('',*,*,#2369,.F.); +#2369 = EDGE_CURVE('',#2150,#2362,#2370,.T.); +#2370 = LINE('',#2371,#2372); +#2371 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#2372 = VECTOR('',#2373,1.); +#2373 = DIRECTION('',(0.,0.,1.)); +#2374 = PLANE('',#2375); +#2375 = AXIS2_PLACEMENT_3D('',#2376,#2377,#2378); +#2376 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#2377 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2378 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2379 = ADVANCED_FACE('',(#2380),#2398,.F.); +#2380 = FACE_BOUND('',#2381,.F.); +#2381 = EDGE_LOOP('',(#2382,#2383,#2391,#2397)); +#2382 = ORIENTED_EDGE('',*,*,#1882,.T.); +#2383 = ORIENTED_EDGE('',*,*,#2384,.T.); +#2384 = EDGE_CURVE('',#1875,#2385,#2387,.T.); +#2385 = VERTEX_POINT('',#2386); +#2386 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#2387 = LINE('',#2388,#2389); +#2388 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#2389 = VECTOR('',#2390,1.); +#2390 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2391 = ORIENTED_EDGE('',*,*,#2392,.F.); +#2392 = EDGE_CURVE('',#1593,#2385,#2393,.T.); +#2393 = LINE('',#2394,#2395); +#2394 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#2395 = VECTOR('',#2396,1.); +#2396 = DIRECTION('',(0.,0.,-1.)); +#2397 = ORIENTED_EDGE('',*,*,#1600,.F.); +#2398 = PLANE('',#2399); +#2399 = AXIS2_PLACEMENT_3D('',#2400,#2401,#2402); +#2400 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#2401 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2402 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2403 = ADVANCED_FACE('',(#2404),#2431,.T.); +#2404 = FACE_BOUND('',#2405,.T.); +#2405 = EDGE_LOOP('',(#2406,#2407,#2415,#2423,#2429,#2430)); +#2406 = ORIENTED_EDGE('',*,*,#2289,.T.); +#2407 = ORIENTED_EDGE('',*,*,#2408,.T.); +#2408 = EDGE_CURVE('',#2290,#2409,#2411,.T.); +#2409 = VERTEX_POINT('',#2410); +#2410 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#2411 = LINE('',#2412,#2413); +#2412 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#2413 = VECTOR('',#2414,1.); +#2414 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2415 = ORIENTED_EDGE('',*,*,#2416,.T.); +#2416 = EDGE_CURVE('',#2409,#2417,#2419,.T.); +#2417 = VERTEX_POINT('',#2418); +#2418 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#2419 = LINE('',#2420,#2421); +#2420 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#2421 = VECTOR('',#2422,1.); +#2422 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2423 = ORIENTED_EDGE('',*,*,#2424,.T.); +#2424 = EDGE_CURVE('',#2417,#1713,#2425,.T.); +#2425 = LINE('',#2426,#2427); +#2426 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#2427 = VECTOR('',#2428,1.); +#2428 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2429 = ORIENTED_EDGE('',*,*,#1720,.T.); +#2430 = ORIENTED_EDGE('',*,*,#1916,.T.); +#2431 = PLANE('',#2432); +#2432 = AXIS2_PLACEMENT_3D('',#2433,#2434,#2435); +#2433 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#2434 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2435 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2436 = ADVANCED_FACE('',(#2437),#2455,.F.); +#2437 = FACE_BOUND('',#2438,.F.); +#2438 = EDGE_LOOP('',(#2439,#2447,#2448,#2449)); +#2439 = ORIENTED_EDGE('',*,*,#2440,.T.); +#2440 = EDGE_CURVE('',#2441,#2417,#2443,.T.); +#2441 = VERTEX_POINT('',#2442); +#2442 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2443 = LINE('',#2444,#2445); +#2444 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2445 = VECTOR('',#2446,1.); +#2446 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2447 = ORIENTED_EDGE('',*,*,#2424,.T.); +#2448 = ORIENTED_EDGE('',*,*,#1712,.F.); +#2449 = ORIENTED_EDGE('',*,*,#2450,.F.); +#2450 = EDGE_CURVE('',#2441,#1705,#2451,.T.); +#2451 = LINE('',#2452,#2453); +#2452 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2453 = VECTOR('',#2454,1.); +#2454 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2455 = PLANE('',#2456); +#2456 = AXIS2_PLACEMENT_3D('',#2457,#2458,#2459); +#2457 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#2458 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#2459 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2460 = ADVANCED_FACE('',(#2461),#2486,.F.); +#2461 = FACE_BOUND('',#2462,.F.); +#2462 = EDGE_LOOP('',(#2463,#2464,#2472,#2478,#2479,#2480)); +#2463 = ORIENTED_EDGE('',*,*,#2305,.T.); +#2464 = ORIENTED_EDGE('',*,*,#2465,.T.); +#2465 = EDGE_CURVE('',#2298,#2466,#2468,.T.); +#2466 = VERTEX_POINT('',#2467); +#2467 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#2468 = LINE('',#2469,#2470); +#2469 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#2470 = VECTOR('',#2471,1.); +#2471 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2472 = ORIENTED_EDGE('',*,*,#2473,.T.); +#2473 = EDGE_CURVE('',#2466,#2441,#2474,.T.); +#2474 = LINE('',#2475,#2476); +#2475 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#2476 = VECTOR('',#2477,1.); +#2477 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2478 = ORIENTED_EDGE('',*,*,#2450,.T.); +#2479 = ORIENTED_EDGE('',*,*,#1704,.T.); +#2480 = ORIENTED_EDGE('',*,*,#2481,.T.); +#2481 = EDGE_CURVE('',#1697,#2306,#2482,.T.); +#2482 = LINE('',#2483,#2484); +#2483 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#2484 = VECTOR('',#2485,1.); +#2485 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2486 = PLANE('',#2487); +#2487 = AXIS2_PLACEMENT_3D('',#2488,#2489,#2490); +#2488 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#2489 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2490 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2491 = ADVANCED_FACE('',(#2492),#2503,.F.); +#2492 = FACE_BOUND('',#2493,.F.); +#2493 = EDGE_LOOP('',(#2494,#2495,#2496,#2502)); +#2494 = ORIENTED_EDGE('',*,*,#2481,.F.); +#2495 = ORIENTED_EDGE('',*,*,#1696,.T.); +#2496 = ORIENTED_EDGE('',*,*,#2497,.T.); +#2497 = EDGE_CURVE('',#1689,#2314,#2498,.T.); +#2498 = LINE('',#2499,#2500); +#2499 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#2500 = VECTOR('',#2501,1.); +#2501 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2502 = ORIENTED_EDGE('',*,*,#2313,.T.); +#2503 = PLANE('',#2504); +#2504 = AXIS2_PLACEMENT_3D('',#2505,#2506,#2507); +#2505 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#2506 = DIRECTION('',(0.,0.,1.)); +#2507 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2508 = ADVANCED_FACE('',(#2509),#2536,.T.); +#2509 = FACE_BOUND('',#2510,.T.); +#2510 = EDGE_LOOP('',(#2511,#2512,#2520,#2528,#2534,#2535)); +#2511 = ORIENTED_EDGE('',*,*,#2321,.T.); +#2512 = ORIENTED_EDGE('',*,*,#2513,.T.); +#2513 = EDGE_CURVE('',#2322,#2514,#2516,.T.); +#2514 = VERTEX_POINT('',#2515); +#2515 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#2516 = LINE('',#2517,#2518); +#2517 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#2518 = VECTOR('',#2519,1.); +#2519 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2520 = ORIENTED_EDGE('',*,*,#2521,.T.); +#2521 = EDGE_CURVE('',#2514,#2522,#2524,.T.); +#2522 = VERTEX_POINT('',#2523); +#2523 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#2524 = LINE('',#2525,#2526); +#2525 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#2526 = VECTOR('',#2527,1.); +#2527 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2528 = ORIENTED_EDGE('',*,*,#2529,.T.); +#2529 = EDGE_CURVE('',#2522,#1681,#2530,.T.); +#2530 = LINE('',#2531,#2532); +#2531 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#2532 = VECTOR('',#2533,1.); +#2533 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2534 = ORIENTED_EDGE('',*,*,#1688,.T.); +#2535 = ORIENTED_EDGE('',*,*,#2497,.T.); +#2536 = PLANE('',#2537); +#2537 = AXIS2_PLACEMENT_3D('',#2538,#2539,#2540); +#2538 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#2539 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2540 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2541 = ADVANCED_FACE('',(#2542),#2560,.F.); +#2542 = FACE_BOUND('',#2543,.F.); +#2543 = EDGE_LOOP('',(#2544,#2552,#2553,#2554)); +#2544 = ORIENTED_EDGE('',*,*,#2545,.T.); +#2545 = EDGE_CURVE('',#2546,#2522,#2548,.T.); +#2546 = VERTEX_POINT('',#2547); +#2547 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2548 = LINE('',#2549,#2550); +#2549 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2550 = VECTOR('',#2551,1.); +#2551 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2552 = ORIENTED_EDGE('',*,*,#2529,.T.); +#2553 = ORIENTED_EDGE('',*,*,#1680,.F.); +#2554 = ORIENTED_EDGE('',*,*,#2555,.F.); +#2555 = EDGE_CURVE('',#2546,#1673,#2556,.T.); +#2556 = LINE('',#2557,#2558); +#2557 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2558 = VECTOR('',#2559,1.); +#2559 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2560 = PLANE('',#2561); +#2561 = AXIS2_PLACEMENT_3D('',#2562,#2563,#2564); +#2562 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#2563 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#2564 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2565 = ADVANCED_FACE('',(#2566),#2591,.F.); +#2566 = FACE_BOUND('',#2567,.F.); +#2567 = EDGE_LOOP('',(#2568,#2569,#2577,#2583,#2584,#2585)); +#2568 = ORIENTED_EDGE('',*,*,#2337,.T.); +#2569 = ORIENTED_EDGE('',*,*,#2570,.T.); +#2570 = EDGE_CURVE('',#2330,#2571,#2573,.T.); +#2571 = VERTEX_POINT('',#2572); +#2572 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#2573 = LINE('',#2574,#2575); +#2574 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#2575 = VECTOR('',#2576,1.); +#2576 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2577 = ORIENTED_EDGE('',*,*,#2578,.T.); +#2578 = EDGE_CURVE('',#2571,#2546,#2579,.T.); +#2579 = LINE('',#2580,#2581); +#2580 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#2581 = VECTOR('',#2582,1.); +#2582 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2583 = ORIENTED_EDGE('',*,*,#2555,.T.); +#2584 = ORIENTED_EDGE('',*,*,#1672,.T.); +#2585 = ORIENTED_EDGE('',*,*,#2586,.T.); +#2586 = EDGE_CURVE('',#1665,#2338,#2587,.T.); +#2587 = LINE('',#2588,#2589); +#2588 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#2589 = VECTOR('',#2590,1.); +#2590 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2591 = PLANE('',#2592); +#2592 = AXIS2_PLACEMENT_3D('',#2593,#2594,#2595); +#2593 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#2594 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2595 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2596 = ADVANCED_FACE('',(#2597),#2608,.F.); +#2597 = FACE_BOUND('',#2598,.F.); +#2598 = EDGE_LOOP('',(#2599,#2600,#2606,#2607)); +#2599 = ORIENTED_EDGE('',*,*,#1664,.T.); +#2600 = ORIENTED_EDGE('',*,*,#2601,.T.); +#2601 = EDGE_CURVE('',#1657,#2346,#2602,.T.); +#2602 = LINE('',#2603,#2604); +#2603 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#2604 = VECTOR('',#2605,1.); +#2605 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2606 = ORIENTED_EDGE('',*,*,#2345,.T.); +#2607 = ORIENTED_EDGE('',*,*,#2586,.F.); +#2608 = PLANE('',#2609); +#2609 = AXIS2_PLACEMENT_3D('',#2610,#2611,#2612); +#2610 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#2611 = DIRECTION('',(0.,0.,1.)); +#2612 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2613 = ADVANCED_FACE('',(#2614),#2641,.T.); +#2614 = FACE_BOUND('',#2615,.T.); +#2615 = EDGE_LOOP('',(#2616,#2617,#2625,#2633,#2639,#2640)); +#2616 = ORIENTED_EDGE('',*,*,#2353,.T.); +#2617 = ORIENTED_EDGE('',*,*,#2618,.T.); +#2618 = EDGE_CURVE('',#2354,#2619,#2621,.T.); +#2619 = VERTEX_POINT('',#2620); +#2620 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#2621 = LINE('',#2622,#2623); +#2622 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#2623 = VECTOR('',#2624,1.); +#2624 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2625 = ORIENTED_EDGE('',*,*,#2626,.T.); +#2626 = EDGE_CURVE('',#2619,#2627,#2629,.T.); +#2627 = VERTEX_POINT('',#2628); +#2628 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#2629 = LINE('',#2630,#2631); +#2630 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#2631 = VECTOR('',#2632,1.); +#2632 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2633 = ORIENTED_EDGE('',*,*,#2634,.T.); +#2634 = EDGE_CURVE('',#2627,#1649,#2635,.T.); +#2635 = LINE('',#2636,#2637); +#2636 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#2637 = VECTOR('',#2638,1.); +#2638 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2639 = ORIENTED_EDGE('',*,*,#1656,.T.); +#2640 = ORIENTED_EDGE('',*,*,#2601,.T.); +#2641 = PLANE('',#2642); +#2642 = AXIS2_PLACEMENT_3D('',#2643,#2644,#2645); +#2643 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#2644 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2645 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2646 = ADVANCED_FACE('',(#2647),#2665,.F.); +#2647 = FACE_BOUND('',#2648,.F.); +#2648 = EDGE_LOOP('',(#2649,#2657,#2658,#2659)); +#2649 = ORIENTED_EDGE('',*,*,#2650,.T.); +#2650 = EDGE_CURVE('',#2651,#2627,#2653,.T.); +#2651 = VERTEX_POINT('',#2652); +#2652 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2653 = LINE('',#2654,#2655); +#2654 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2655 = VECTOR('',#2656,1.); +#2656 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2657 = ORIENTED_EDGE('',*,*,#2634,.T.); +#2658 = ORIENTED_EDGE('',*,*,#1648,.F.); +#2659 = ORIENTED_EDGE('',*,*,#2660,.F.); +#2660 = EDGE_CURVE('',#2651,#1641,#2661,.T.); +#2661 = LINE('',#2662,#2663); +#2662 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2663 = VECTOR('',#2664,1.); +#2664 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2665 = PLANE('',#2666); +#2666 = AXIS2_PLACEMENT_3D('',#2667,#2668,#2669); +#2667 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#2668 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#2669 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#2670 = ADVANCED_FACE('',(#2671),#2696,.F.); +#2671 = FACE_BOUND('',#2672,.F.); +#2672 = EDGE_LOOP('',(#2673,#2674,#2682,#2688,#2689,#2690)); +#2673 = ORIENTED_EDGE('',*,*,#2369,.T.); +#2674 = ORIENTED_EDGE('',*,*,#2675,.T.); +#2675 = EDGE_CURVE('',#2362,#2676,#2678,.T.); +#2676 = VERTEX_POINT('',#2677); +#2677 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#2678 = LINE('',#2679,#2680); +#2679 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#2680 = VECTOR('',#2681,1.); +#2681 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#2682 = ORIENTED_EDGE('',*,*,#2683,.T.); +#2683 = EDGE_CURVE('',#2676,#2651,#2684,.T.); +#2684 = LINE('',#2685,#2686); +#2685 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#2686 = VECTOR('',#2687,1.); +#2687 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2688 = ORIENTED_EDGE('',*,*,#2660,.T.); +#2689 = ORIENTED_EDGE('',*,*,#1640,.T.); +#2690 = ORIENTED_EDGE('',*,*,#2691,.T.); +#2691 = EDGE_CURVE('',#1633,#2150,#2692,.T.); +#2692 = LINE('',#2693,#2694); +#2693 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#2694 = VECTOR('',#2695,1.); +#2695 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2696 = PLANE('',#2697); +#2697 = AXIS2_PLACEMENT_3D('',#2698,#2699,#2700); +#2698 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#2699 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#2700 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#2701 = ADVANCED_FACE('',(#2702),#2708,.F.); +#2702 = FACE_BOUND('',#2703,.F.); +#2703 = EDGE_LOOP('',(#2704,#2705,#2706,#2707)); +#2704 = ORIENTED_EDGE('',*,*,#1758,.T.); +#2705 = ORIENTED_EDGE('',*,*,#2149,.T.); +#2706 = ORIENTED_EDGE('',*,*,#2691,.F.); +#2707 = ORIENTED_EDGE('',*,*,#1632,.T.); +#2708 = PLANE('',#2709); +#2709 = AXIS2_PLACEMENT_3D('',#2710,#2711,#2712); +#2710 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#2711 = DIRECTION('',(0.,0.,1.)); +#2712 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2713 = ADVANCED_FACE('',(#2714),#2741,.F.); +#2714 = FACE_BOUND('',#2715,.F.); +#2715 = EDGE_LOOP('',(#2716,#2717,#2718,#2719,#2725,#2726,#2735)); +#2716 = ORIENTED_EDGE('',*,*,#1833,.T.); +#2717 = ORIENTED_EDGE('',*,*,#1744,.F.); +#2718 = ORIENTED_EDGE('',*,*,#2392,.T.); +#2719 = ORIENTED_EDGE('',*,*,#2720,.T.); +#2720 = EDGE_CURVE('',#2385,#2096,#2721,.T.); +#2721 = LINE('',#2722,#2723); +#2722 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#2723 = VECTOR('',#2724,1.); +#2724 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2725 = ORIENTED_EDGE('',*,*,#2103,.F.); +#2726 = ORIENTED_EDGE('',*,*,#2727,.F.); +#2727 = EDGE_CURVE('',#2728,#2104,#2730,.T.); +#2728 = VERTEX_POINT('',#2729); +#2729 = CARTESIAN_POINT('',(6.6,1.,3.65)); +#2730 = CIRCLE('',#2731,0.5); +#2731 = AXIS2_PLACEMENT_3D('',#2732,#2733,#2734); +#2732 = CARTESIAN_POINT('',(6.6,1.,4.15)); +#2733 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2734 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2735 = ORIENTED_EDGE('',*,*,#2736,.T.); +#2736 = EDGE_CURVE('',#2728,#1826,#2737,.T.); +#2737 = LINE('',#2738,#2739); +#2738 = CARTESIAN_POINT('',(6.6,-0.825,3.65)); +#2739 = VECTOR('',#2740,1.); +#2740 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2741 = PLANE('',#2742); +#2742 = AXIS2_PLACEMENT_3D('',#2743,#2744,#2745); +#2743 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#2744 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#2745 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2746 = ADVANCED_FACE('',(#2747),#2758,.T.); +#2747 = FACE_BOUND('',#2748,.T.); +#2748 = EDGE_LOOP('',(#2749,#2750,#2751,#2752)); +#2749 = ORIENTED_EDGE('',*,*,#1956,.F.); +#2750 = ORIENTED_EDGE('',*,*,#1801,.T.); +#2751 = ORIENTED_EDGE('',*,*,#2158,.T.); +#2752 = ORIENTED_EDGE('',*,*,#2753,.T.); +#2753 = EDGE_CURVE('',#2159,#1957,#2754,.T.); +#2754 = LINE('',#2755,#2756); +#2755 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#2756 = VECTOR('',#2757,1.); +#2757 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2758 = PLANE('',#2759); +#2759 = AXIS2_PLACEMENT_3D('',#2760,#2761,#2762); +#2760 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#2761 = DIRECTION('',(0.,0.,1.)); +#2762 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2763 = ADVANCED_FACE('',(#2764),#2775,.F.); +#2764 = FACE_BOUND('',#2765,.F.); +#2765 = EDGE_LOOP('',(#2766,#2772,#2773,#2774)); +#2766 = ORIENTED_EDGE('',*,*,#2767,.T.); +#2767 = EDGE_CURVE('',#1777,#2728,#2768,.T.); +#2768 = LINE('',#2769,#2770); +#2769 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#2770 = VECTOR('',#2771,1.); +#2771 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2772 = ORIENTED_EDGE('',*,*,#2727,.T.); +#2773 = ORIENTED_EDGE('',*,*,#2111,.F.); +#2774 = ORIENTED_EDGE('',*,*,#1784,.T.); +#2775 = CYLINDRICAL_SURFACE('',#2776,0.5); +#2776 = AXIS2_PLACEMENT_3D('',#2777,#2778,#2779); +#2777 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#2778 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#2779 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#2780 = ADVANCED_FACE('',(#2781),#2787,.T.); +#2781 = FACE_BOUND('',#2782,.T.); +#2782 = EDGE_LOOP('',(#2783,#2784,#2785,#2786)); +#2783 = ORIENTED_EDGE('',*,*,#1776,.F.); +#2784 = ORIENTED_EDGE('',*,*,#2767,.T.); +#2785 = ORIENTED_EDGE('',*,*,#2736,.T.); +#2786 = ORIENTED_EDGE('',*,*,#1825,.F.); +#2787 = PLANE('',#2788); +#2788 = AXIS2_PLACEMENT_3D('',#2789,#2790,#2791); +#2789 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#2790 = DIRECTION('',(0.,0.,1.)); +#2791 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2792 = ADVANCED_FACE('',(#2793,#2799,#2833,#2867),#2901,.T.); +#2793 = FACE_BOUND('',#2794,.T.); +#2794 = EDGE_LOOP('',(#2795,#2796,#2797,#2798)); +#2795 = ORIENTED_EDGE('',*,*,#2095,.T.); +#2796 = ORIENTED_EDGE('',*,*,#1874,.T.); +#2797 = ORIENTED_EDGE('',*,*,#2384,.T.); +#2798 = ORIENTED_EDGE('',*,*,#2720,.T.); +#2799 = FACE_BOUND('',#2800,.T.); +#2800 = EDGE_LOOP('',(#2801,#2811,#2819,#2827)); +#2801 = ORIENTED_EDGE('',*,*,#2802,.F.); +#2802 = EDGE_CURVE('',#2803,#2805,#2807,.T.); +#2803 = VERTEX_POINT('',#2804); +#2804 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#2805 = VERTEX_POINT('',#2806); +#2806 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#2807 = LINE('',#2808,#2809); +#2808 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#2809 = VECTOR('',#2810,1.); +#2810 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2811 = ORIENTED_EDGE('',*,*,#2812,.T.); +#2812 = EDGE_CURVE('',#2803,#2813,#2815,.T.); +#2813 = VERTEX_POINT('',#2814); +#2814 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#2815 = LINE('',#2816,#2817); +#2816 = CARTESIAN_POINT('',(1.41,0.32,1.85)); +#2817 = VECTOR('',#2818,1.); +#2818 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#2819 = ORIENTED_EDGE('',*,*,#2820,.T.); +#2820 = EDGE_CURVE('',#2813,#2821,#2823,.T.); +#2821 = VERTEX_POINT('',#2822); +#2822 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#2823 = LINE('',#2824,#2825); +#2824 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#2825 = VECTOR('',#2826,1.); +#2826 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2827 = ORIENTED_EDGE('',*,*,#2828,.T.); +#2828 = EDGE_CURVE('',#2821,#2805,#2829,.T.); +#2829 = LINE('',#2830,#2831); +#2830 = CARTESIAN_POINT('',(1.41,-0.32,1.85)); +#2831 = VECTOR('',#2832,1.); +#2832 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2833 = FACE_BOUND('',#2834,.T.); +#2834 = EDGE_LOOP('',(#2835,#2845,#2853,#2861)); +#2835 = ORIENTED_EDGE('',*,*,#2836,.F.); +#2836 = EDGE_CURVE('',#2837,#2839,#2841,.T.); +#2837 = VERTEX_POINT('',#2838); +#2838 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#2839 = VERTEX_POINT('',#2840); +#2840 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#2841 = LINE('',#2842,#2843); +#2842 = CARTESIAN_POINT('',(4.68,-0.26920299558,1.85)); +#2843 = VECTOR('',#2844,1.); +#2844 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2845 = ORIENTED_EDGE('',*,*,#2846,.T.); +#2846 = EDGE_CURVE('',#2837,#2847,#2849,.T.); +#2847 = VERTEX_POINT('',#2848); +#2848 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#2849 = LINE('',#2850,#2851); +#2850 = CARTESIAN_POINT('',(3.91,0.32,1.85)); +#2851 = VECTOR('',#2852,1.); +#2852 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#2853 = ORIENTED_EDGE('',*,*,#2854,.T.); +#2854 = EDGE_CURVE('',#2847,#2855,#2857,.T.); +#2855 = VERTEX_POINT('',#2856); +#2856 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#2857 = LINE('',#2858,#2859); +#2858 = CARTESIAN_POINT('',(5.32,-0.26920299558,1.85)); +#2859 = VECTOR('',#2860,1.); +#2860 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2861 = ORIENTED_EDGE('',*,*,#2862,.T.); +#2862 = EDGE_CURVE('',#2855,#2839,#2863,.T.); +#2863 = LINE('',#2864,#2865); +#2864 = CARTESIAN_POINT('',(3.91,-0.32,1.85)); +#2865 = VECTOR('',#2866,1.); +#2866 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2867 = FACE_BOUND('',#2868,.T.); +#2868 = EDGE_LOOP('',(#2869,#2879,#2887,#2895)); +#2869 = ORIENTED_EDGE('',*,*,#2870,.F.); +#2870 = EDGE_CURVE('',#2871,#2873,#2875,.T.); +#2871 = VERTEX_POINT('',#2872); +#2872 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#2873 = VERTEX_POINT('',#2874); +#2874 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#2875 = LINE('',#2876,#2877); +#2876 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#2877 = VECTOR('',#2878,1.); +#2878 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2879 = ORIENTED_EDGE('',*,*,#2880,.T.); +#2880 = EDGE_CURVE('',#2871,#2881,#2883,.T.); +#2881 = VERTEX_POINT('',#2882); +#2882 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#2883 = LINE('',#2884,#2885); +#2884 = CARTESIAN_POINT('',(2.66,0.32,1.85)); +#2885 = VECTOR('',#2886,1.); +#2886 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#2887 = ORIENTED_EDGE('',*,*,#2888,.T.); +#2888 = EDGE_CURVE('',#2881,#2889,#2891,.T.); +#2889 = VERTEX_POINT('',#2890); +#2890 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#2891 = LINE('',#2892,#2893); +#2892 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#2893 = VECTOR('',#2894,1.); +#2894 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2895 = ORIENTED_EDGE('',*,*,#2896,.T.); +#2896 = EDGE_CURVE('',#2889,#2873,#2897,.T.); +#2897 = LINE('',#2898,#2899); +#2898 = CARTESIAN_POINT('',(2.66,-0.32,1.85)); +#2899 = VECTOR('',#2900,1.); +#2900 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2901 = PLANE('',#2902); +#2902 = AXIS2_PLACEMENT_3D('',#2903,#2904,#2905); +#2903 = CARTESIAN_POINT('',(2.5,-0.575,1.85)); +#2904 = DIRECTION('',(7.789680114753E-33,-9.539606818914E-49,1.)); +#2905 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#2906 = ADVANCED_FACE('',(#2907),#2918,.F.); +#2907 = FACE_BOUND('',#2908,.F.); +#2908 = EDGE_LOOP('',(#2909,#2910,#2916,#2917)); +#2909 = ORIENTED_EDGE('',*,*,#2280,.F.); +#2910 = ORIENTED_EDGE('',*,*,#2911,.T.); +#2911 = EDGE_CURVE('',#2273,#2071,#2912,.T.); +#2912 = LINE('',#2913,#2914); +#2913 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2914 = VECTOR('',#2915,1.); +#2915 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2916 = ORIENTED_EDGE('',*,*,#2078,.F.); +#2917 = ORIENTED_EDGE('',*,*,#2126,.F.); +#2918 = PLANE('',#2919); +#2919 = AXIS2_PLACEMENT_3D('',#2920,#2921,#2922); +#2920 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#2921 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2922 = DIRECTION('',(0.,0.,1.)); +#2923 = ADVANCED_FACE('',(#2924),#2935,.F.); +#2924 = FACE_BOUND('',#2925,.F.); +#2925 = EDGE_LOOP('',(#2926,#2927,#2933,#2934)); +#2926 = ORIENTED_EDGE('',*,*,#2272,.F.); +#2927 = ORIENTED_EDGE('',*,*,#2928,.T.); +#2928 = EDGE_CURVE('',#2265,#2063,#2929,.T.); +#2929 = LINE('',#2930,#2931); +#2930 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2931 = VECTOR('',#2932,1.); +#2932 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2933 = ORIENTED_EDGE('',*,*,#2070,.F.); +#2934 = ORIENTED_EDGE('',*,*,#2911,.F.); +#2935 = PLANE('',#2936); +#2936 = AXIS2_PLACEMENT_3D('',#2937,#2938,#2939); +#2937 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#2938 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#2939 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2940 = ADVANCED_FACE('',(#2941),#2952,.F.); +#2941 = FACE_BOUND('',#2942,.F.); +#2942 = EDGE_LOOP('',(#2943,#2944,#2950,#2951)); +#2943 = ORIENTED_EDGE('',*,*,#2264,.F.); +#2944 = ORIENTED_EDGE('',*,*,#2945,.T.); +#2945 = EDGE_CURVE('',#2257,#2055,#2946,.T.); +#2946 = LINE('',#2947,#2948); +#2947 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2948 = VECTOR('',#2949,1.); +#2949 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2950 = ORIENTED_EDGE('',*,*,#2062,.F.); +#2951 = ORIENTED_EDGE('',*,*,#2928,.F.); +#2952 = PLANE('',#2953); +#2953 = AXIS2_PLACEMENT_3D('',#2954,#2955,#2956); +#2954 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#2955 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#2956 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#2957 = ADVANCED_FACE('',(#2958),#2969,.F.); +#2958 = FACE_BOUND('',#2959,.F.); +#2959 = EDGE_LOOP('',(#2960,#2961,#2967,#2968)); +#2960 = ORIENTED_EDGE('',*,*,#2256,.F.); +#2961 = ORIENTED_EDGE('',*,*,#2962,.T.); +#2962 = EDGE_CURVE('',#2248,#2046,#2963,.T.); +#2963 = LINE('',#2964,#2965); +#2964 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#2965 = VECTOR('',#2966,1.); +#2966 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2967 = ORIENTED_EDGE('',*,*,#2054,.F.); +#2968 = ORIENTED_EDGE('',*,*,#2945,.F.); +#2969 = PLANE('',#2970); +#2970 = AXIS2_PLACEMENT_3D('',#2971,#2972,#2973); +#2971 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#2972 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#2973 = DIRECTION('',(0.,0.,1.)); +#2974 = ADVANCED_FACE('',(#2975),#2986,.F.); +#2975 = FACE_BOUND('',#2976,.F.); +#2976 = EDGE_LOOP('',(#2977,#2978,#2979,#2980)); +#2977 = ORIENTED_EDGE('',*,*,#2045,.F.); +#2978 = ORIENTED_EDGE('',*,*,#2962,.F.); +#2979 = ORIENTED_EDGE('',*,*,#2247,.F.); +#2980 = ORIENTED_EDGE('',*,*,#2981,.T.); +#2981 = EDGE_CURVE('',#2240,#2038,#2982,.T.); +#2982 = LINE('',#2983,#2984); +#2983 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#2984 = VECTOR('',#2985,1.); +#2985 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2986 = CYLINDRICAL_SURFACE('',#2987,0.75); +#2987 = AXIS2_PLACEMENT_3D('',#2988,#2989,#2990); +#2988 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#2989 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#2990 = DIRECTION('',(-0.,0.,-1.)); +#2991 = ADVANCED_FACE('',(#2992),#3003,.F.); +#2992 = FACE_BOUND('',#2993,.F.); +#2993 = EDGE_LOOP('',(#2994,#2995,#2996,#3002)); +#2994 = ORIENTED_EDGE('',*,*,#2981,.F.); +#2995 = ORIENTED_EDGE('',*,*,#2239,.F.); +#2996 = ORIENTED_EDGE('',*,*,#2997,.T.); +#2997 = EDGE_CURVE('',#2232,#2030,#2998,.T.); +#2998 = LINE('',#2999,#3000); +#2999 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#3000 = VECTOR('',#3001,1.); +#3001 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3002 = ORIENTED_EDGE('',*,*,#2037,.F.); +#3003 = PLANE('',#3004); +#3004 = AXIS2_PLACEMENT_3D('',#3005,#3006,#3007); +#3005 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#3006 = DIRECTION('',(-0.,0.,-1.)); +#3007 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3008 = ADVANCED_FACE('',(#3009),#3020,.F.); +#3009 = FACE_BOUND('',#3010,.F.); +#3010 = EDGE_LOOP('',(#3011,#3012,#3018,#3019)); +#3011 = ORIENTED_EDGE('',*,*,#2231,.F.); +#3012 = ORIENTED_EDGE('',*,*,#3013,.T.); +#3013 = EDGE_CURVE('',#2224,#2022,#3014,.T.); +#3014 = LINE('',#3015,#3016); +#3015 = CARTESIAN_POINT('',(1.,2.35,7.)); +#3016 = VECTOR('',#3017,1.); +#3017 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3018 = ORIENTED_EDGE('',*,*,#2029,.F.); +#3019 = ORIENTED_EDGE('',*,*,#2997,.F.); +#3020 = PLANE('',#3021); +#3021 = AXIS2_PLACEMENT_3D('',#3022,#3023,#3024); +#3022 = CARTESIAN_POINT('',(1.,2.35,7.)); +#3023 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3024 = DIRECTION('',(0.,-0.,-1.)); +#3025 = ADVANCED_FACE('',(#3026),#3037,.T.); +#3026 = FACE_BOUND('',#3027,.T.); +#3027 = EDGE_LOOP('',(#3028,#3029,#3035,#3036)); +#3028 = ORIENTED_EDGE('',*,*,#2021,.F.); +#3029 = ORIENTED_EDGE('',*,*,#3030,.F.); +#3030 = EDGE_CURVE('',#2216,#2014,#3031,.T.); +#3031 = LINE('',#3032,#3033); +#3032 = CARTESIAN_POINT('',(4.,2.35,7.)); +#3033 = VECTOR('',#3034,1.); +#3034 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3035 = ORIENTED_EDGE('',*,*,#2223,.T.); +#3036 = ORIENTED_EDGE('',*,*,#3013,.T.); +#3037 = PLANE('',#3038); +#3038 = AXIS2_PLACEMENT_3D('',#3039,#3040,#3041); +#3039 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#3040 = DIRECTION('',(0.,0.,1.)); +#3041 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3042 = ADVANCED_FACE('',(#3043),#3054,.T.); +#3043 = FACE_BOUND('',#3044,.T.); +#3044 = EDGE_LOOP('',(#3045,#3046,#3047,#3048)); +#3045 = ORIENTED_EDGE('',*,*,#2215,.F.); +#3046 = ORIENTED_EDGE('',*,*,#3030,.T.); +#3047 = ORIENTED_EDGE('',*,*,#2013,.F.); +#3048 = ORIENTED_EDGE('',*,*,#3049,.F.); +#3049 = EDGE_CURVE('',#2208,#2006,#3050,.T.); +#3050 = LINE('',#3051,#3052); +#3051 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#3052 = VECTOR('',#3053,1.); +#3053 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3054 = PLANE('',#3055); +#3055 = AXIS2_PLACEMENT_3D('',#3056,#3057,#3058); +#3056 = CARTESIAN_POINT('',(4.,2.35,7.)); +#3057 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3058 = DIRECTION('',(0.,-0.,-1.)); +#3059 = ADVANCED_FACE('',(#3060),#3071,.T.); +#3060 = FACE_BOUND('',#3061,.T.); +#3061 = EDGE_LOOP('',(#3062,#3068,#3069,#3070)); +#3062 = ORIENTED_EDGE('',*,*,#3063,.F.); +#3063 = EDGE_CURVE('',#2199,#1997,#3064,.T.); +#3064 = LINE('',#3065,#3066); +#3065 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#3066 = VECTOR('',#3067,1.); +#3067 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3068 = ORIENTED_EDGE('',*,*,#2207,.F.); +#3069 = ORIENTED_EDGE('',*,*,#3049,.T.); +#3070 = ORIENTED_EDGE('',*,*,#2005,.F.); +#3071 = PLANE('',#3072); +#3072 = AXIS2_PLACEMENT_3D('',#3073,#3074,#3075); +#3073 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#3074 = DIRECTION('',(0.,0.,1.)); +#3075 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3076 = ADVANCED_FACE('',(#3077),#3088,.F.); +#3077 = FACE_BOUND('',#3078,.F.); +#3078 = EDGE_LOOP('',(#3079,#3080,#3081,#3087)); +#3079 = ORIENTED_EDGE('',*,*,#3063,.F.); +#3080 = ORIENTED_EDGE('',*,*,#2198,.T.); +#3081 = ORIENTED_EDGE('',*,*,#3082,.T.); +#3082 = EDGE_CURVE('',#2191,#1989,#3083,.T.); +#3083 = LINE('',#3084,#3085); +#3084 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#3085 = VECTOR('',#3086,1.); +#3086 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3087 = ORIENTED_EDGE('',*,*,#1996,.F.); +#3088 = CYLINDRICAL_SURFACE('',#3089,0.75); +#3089 = AXIS2_PLACEMENT_3D('',#3090,#3091,#3092); +#3090 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#3091 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3092 = DIRECTION('',(0.,-0.,-1.)); +#3093 = ADVANCED_FACE('',(#3094),#3105,.T.); +#3094 = FACE_BOUND('',#3095,.T.); +#3095 = EDGE_LOOP('',(#3096,#3097,#3098,#3099)); +#3096 = ORIENTED_EDGE('',*,*,#2190,.F.); +#3097 = ORIENTED_EDGE('',*,*,#3082,.T.); +#3098 = ORIENTED_EDGE('',*,*,#1988,.F.); +#3099 = ORIENTED_EDGE('',*,*,#3100,.F.); +#3100 = EDGE_CURVE('',#2183,#1981,#3101,.T.); +#3101 = LINE('',#3102,#3103); +#3102 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#3103 = VECTOR('',#3104,1.); +#3104 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3105 = PLANE('',#3106); +#3106 = AXIS2_PLACEMENT_3D('',#3107,#3108,#3109); +#3107 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#3108 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3109 = DIRECTION('',(0.,0.,1.)); +#3110 = ADVANCED_FACE('',(#3111),#3122,.T.); +#3111 = FACE_BOUND('',#3112,.T.); +#3112 = EDGE_LOOP('',(#3113,#3114,#3115,#3116)); +#3113 = ORIENTED_EDGE('',*,*,#2182,.F.); +#3114 = ORIENTED_EDGE('',*,*,#3100,.T.); +#3115 = ORIENTED_EDGE('',*,*,#1980,.F.); +#3116 = ORIENTED_EDGE('',*,*,#3117,.F.); +#3117 = EDGE_CURVE('',#2175,#1973,#3118,.T.); +#3118 = LINE('',#3119,#3120); +#3119 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#3120 = VECTOR('',#3121,1.); +#3121 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3122 = PLANE('',#3123); +#3123 = AXIS2_PLACEMENT_3D('',#3124,#3125,#3126); +#3124 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#3125 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#3126 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#3127 = ADVANCED_FACE('',(#3128),#3139,.T.); +#3128 = FACE_BOUND('',#3129,.T.); +#3129 = EDGE_LOOP('',(#3130,#3131,#3132,#3133)); +#3130 = ORIENTED_EDGE('',*,*,#2174,.F.); +#3131 = ORIENTED_EDGE('',*,*,#3117,.T.); +#3132 = ORIENTED_EDGE('',*,*,#1972,.F.); +#3133 = ORIENTED_EDGE('',*,*,#3134,.F.); +#3134 = EDGE_CURVE('',#2167,#1965,#3135,.T.); +#3135 = LINE('',#3136,#3137); +#3136 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#3137 = VECTOR('',#3138,1.); +#3138 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3139 = PLANE('',#3140); +#3140 = AXIS2_PLACEMENT_3D('',#3141,#3142,#3143); +#3141 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#3142 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#3143 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#3144 = ADVANCED_FACE('',(#3145),#3151,.T.); +#3145 = FACE_BOUND('',#3146,.T.); +#3146 = EDGE_LOOP('',(#3147,#3148,#3149,#3150)); +#3147 = ORIENTED_EDGE('',*,*,#2166,.F.); +#3148 = ORIENTED_EDGE('',*,*,#3134,.T.); +#3149 = ORIENTED_EDGE('',*,*,#1964,.F.); +#3150 = ORIENTED_EDGE('',*,*,#2753,.F.); +#3151 = PLANE('',#3152); +#3152 = AXIS2_PLACEMENT_3D('',#3153,#3154,#3155); +#3153 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#3154 = DIRECTION('',(-1.,1.224646799147E-16,4.93432455389E-16)); +#3155 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#3156 = ADVANCED_FACE('',(#3157),#3168,.F.); +#3157 = FACE_BOUND('',#3158,.F.); +#3158 = EDGE_LOOP('',(#3159,#3160,#3161,#3167)); +#3159 = ORIENTED_EDGE('',*,*,#2361,.T.); +#3160 = ORIENTED_EDGE('',*,*,#2618,.T.); +#3161 = ORIENTED_EDGE('',*,*,#3162,.F.); +#3162 = EDGE_CURVE('',#2676,#2619,#3163,.T.); +#3163 = LINE('',#3164,#3165); +#3164 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#3165 = VECTOR('',#3166,1.); +#3166 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3167 = ORIENTED_EDGE('',*,*,#2675,.F.); +#3168 = PLANE('',#3169); +#3169 = AXIS2_PLACEMENT_3D('',#3170,#3171,#3172); +#3170 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#3171 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#3172 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#3173 = ADVANCED_FACE('',(#3174),#3185,.F.); +#3174 = FACE_BOUND('',#3175,.F.); +#3175 = EDGE_LOOP('',(#3176,#3177,#3178,#3184)); +#3176 = ORIENTED_EDGE('',*,*,#2329,.T.); +#3177 = ORIENTED_EDGE('',*,*,#2513,.T.); +#3178 = ORIENTED_EDGE('',*,*,#3179,.F.); +#3179 = EDGE_CURVE('',#2571,#2514,#3180,.T.); +#3180 = LINE('',#3181,#3182); +#3181 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#3182 = VECTOR('',#3183,1.); +#3183 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3184 = ORIENTED_EDGE('',*,*,#2570,.F.); +#3185 = PLANE('',#3186); +#3186 = AXIS2_PLACEMENT_3D('',#3187,#3188,#3189); +#3187 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#3188 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#3189 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#3190 = ADVANCED_FACE('',(#3191),#3202,.F.); +#3191 = FACE_BOUND('',#3192,.F.); +#3192 = EDGE_LOOP('',(#3193,#3194,#3195,#3201)); +#3193 = ORIENTED_EDGE('',*,*,#2297,.T.); +#3194 = ORIENTED_EDGE('',*,*,#2408,.T.); +#3195 = ORIENTED_EDGE('',*,*,#3196,.F.); +#3196 = EDGE_CURVE('',#2466,#2409,#3197,.T.); +#3197 = LINE('',#3198,#3199); +#3198 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#3199 = VECTOR('',#3200,1.); +#3200 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3201 = ORIENTED_EDGE('',*,*,#2465,.F.); +#3202 = PLANE('',#3203); +#3203 = AXIS2_PLACEMENT_3D('',#3204,#3205,#3206); +#3204 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#3205 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#3206 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#3207 = ADVANCED_FACE('',(#3208,#3214),#3248,.F.); +#3208 = FACE_BOUND('',#3209,.F.); +#3209 = EDGE_LOOP('',(#3210,#3211,#3212,#3213)); +#3210 = ORIENTED_EDGE('',*,*,#3196,.T.); +#3211 = ORIENTED_EDGE('',*,*,#2416,.T.); +#3212 = ORIENTED_EDGE('',*,*,#2440,.F.); +#3213 = ORIENTED_EDGE('',*,*,#2473,.F.); +#3214 = FACE_BOUND('',#3215,.F.); +#3215 = EDGE_LOOP('',(#3216,#3226,#3234,#3242)); +#3216 = ORIENTED_EDGE('',*,*,#3217,.F.); +#3217 = EDGE_CURVE('',#3218,#3220,#3222,.T.); +#3218 = VERTEX_POINT('',#3219); +#3219 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#3220 = VERTEX_POINT('',#3221); +#3221 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#3222 = LINE('',#3223,#3224); +#3223 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#3224 = VECTOR('',#3225,1.); +#3225 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3226 = ORIENTED_EDGE('',*,*,#3227,.T.); +#3227 = EDGE_CURVE('',#3218,#3228,#3230,.T.); +#3228 = VERTEX_POINT('',#3229); +#3229 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#3230 = LINE('',#3231,#3232); +#3231 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#3232 = VECTOR('',#3233,1.); +#3233 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3234 = ORIENTED_EDGE('',*,*,#3235,.T.); +#3235 = EDGE_CURVE('',#3228,#3236,#3238,.T.); +#3236 = VERTEX_POINT('',#3237); +#3237 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#3238 = LINE('',#3239,#3240); +#3239 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#3240 = VECTOR('',#3241,1.); +#3241 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3242 = ORIENTED_EDGE('',*,*,#3243,.T.); +#3243 = EDGE_CURVE('',#3236,#3220,#3244,.T.); +#3244 = LINE('',#3245,#3246); +#3245 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#3246 = VECTOR('',#3247,1.); +#3247 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3248 = PLANE('',#3249); +#3249 = AXIS2_PLACEMENT_3D('',#3250,#3251,#3252); +#3250 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#3251 = DIRECTION('',(0.,0.,1.)); +#3252 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3253 = ADVANCED_FACE('',(#3254,#3260),#3294,.F.); +#3254 = FACE_BOUND('',#3255,.F.); +#3255 = EDGE_LOOP('',(#3256,#3257,#3258,#3259)); +#3256 = ORIENTED_EDGE('',*,*,#3179,.T.); +#3257 = ORIENTED_EDGE('',*,*,#2521,.T.); +#3258 = ORIENTED_EDGE('',*,*,#2545,.F.); +#3259 = ORIENTED_EDGE('',*,*,#2578,.F.); +#3260 = FACE_BOUND('',#3261,.F.); +#3261 = EDGE_LOOP('',(#3262,#3272,#3280,#3288)); +#3262 = ORIENTED_EDGE('',*,*,#3263,.F.); +#3263 = EDGE_CURVE('',#3264,#3266,#3268,.T.); +#3264 = VERTEX_POINT('',#3265); +#3265 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#3266 = VERTEX_POINT('',#3267); +#3267 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#3268 = LINE('',#3269,#3270); +#3269 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#3270 = VECTOR('',#3271,1.); +#3271 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3272 = ORIENTED_EDGE('',*,*,#3273,.T.); +#3273 = EDGE_CURVE('',#3264,#3274,#3276,.T.); +#3274 = VERTEX_POINT('',#3275); +#3275 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#3276 = LINE('',#3277,#3278); +#3277 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#3278 = VECTOR('',#3279,1.); +#3279 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3280 = ORIENTED_EDGE('',*,*,#3281,.T.); +#3281 = EDGE_CURVE('',#3274,#3282,#3284,.T.); +#3282 = VERTEX_POINT('',#3283); +#3283 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#3284 = LINE('',#3285,#3286); +#3285 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#3286 = VECTOR('',#3287,1.); +#3287 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3288 = ORIENTED_EDGE('',*,*,#3289,.T.); +#3289 = EDGE_CURVE('',#3282,#3266,#3290,.T.); +#3290 = LINE('',#3291,#3292); +#3291 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#3292 = VECTOR('',#3293,1.); +#3293 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3294 = PLANE('',#3295); +#3295 = AXIS2_PLACEMENT_3D('',#3296,#3297,#3298); +#3296 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#3297 = DIRECTION('',(0.,0.,1.)); +#3298 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3299 = ADVANCED_FACE('',(#3300,#3306),#3340,.F.); +#3300 = FACE_BOUND('',#3301,.F.); +#3301 = EDGE_LOOP('',(#3302,#3303,#3304,#3305)); +#3302 = ORIENTED_EDGE('',*,*,#3162,.T.); +#3303 = ORIENTED_EDGE('',*,*,#2626,.T.); +#3304 = ORIENTED_EDGE('',*,*,#2650,.F.); +#3305 = ORIENTED_EDGE('',*,*,#2683,.F.); +#3306 = FACE_BOUND('',#3307,.F.); +#3307 = EDGE_LOOP('',(#3308,#3318,#3326,#3334)); +#3308 = ORIENTED_EDGE('',*,*,#3309,.F.); +#3309 = EDGE_CURVE('',#3310,#3312,#3314,.T.); +#3310 = VERTEX_POINT('',#3311); +#3311 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#3312 = VERTEX_POINT('',#3313); +#3313 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#3314 = LINE('',#3315,#3316); +#3315 = CARTESIAN_POINT('',(4.68,0.26829700442,0.3)); +#3316 = VECTOR('',#3317,1.); +#3317 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3318 = ORIENTED_EDGE('',*,*,#3319,.T.); +#3319 = EDGE_CURVE('',#3310,#3320,#3322,.T.); +#3320 = VERTEX_POINT('',#3321); +#3321 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#3322 = LINE('',#3323,#3324); +#3323 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#3324 = VECTOR('',#3325,1.); +#3325 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#3326 = ORIENTED_EDGE('',*,*,#3327,.T.); +#3327 = EDGE_CURVE('',#3320,#3328,#3330,.T.); +#3328 = VERTEX_POINT('',#3329); +#3329 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#3330 = LINE('',#3331,#3332); +#3331 = CARTESIAN_POINT('',(5.32,0.26829700442,0.3)); +#3332 = VECTOR('',#3333,1.); +#3333 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3334 = ORIENTED_EDGE('',*,*,#3335,.T.); +#3335 = EDGE_CURVE('',#3328,#3312,#3336,.T.); +#3336 = LINE('',#3337,#3338); +#3337 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#3338 = VECTOR('',#3339,1.); +#3339 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3340 = PLANE('',#3341); +#3341 = AXIS2_PLACEMENT_3D('',#3342,#3343,#3344); +#3342 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#3343 = DIRECTION('',(0.,0.,1.)); +#3344 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3345 = ADVANCED_FACE('',(#3346),#3371,.T.); +#3346 = FACE_BOUND('',#3347,.T.); +#3347 = EDGE_LOOP('',(#3348,#3349,#3357,#3365)); +#3348 = ORIENTED_EDGE('',*,*,#2802,.T.); +#3349 = ORIENTED_EDGE('',*,*,#3350,.T.); +#3350 = EDGE_CURVE('',#2805,#3351,#3353,.T.); +#3351 = VERTEX_POINT('',#3352); +#3352 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#3353 = LINE('',#3354,#3355); +#3354 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#3355 = VECTOR('',#3356,1.); +#3356 = DIRECTION('',(0.,0.,1.)); +#3357 = ORIENTED_EDGE('',*,*,#3358,.T.); +#3358 = EDGE_CURVE('',#3351,#3359,#3361,.T.); +#3359 = VERTEX_POINT('',#3360); +#3360 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#3361 = LINE('',#3362,#3363); +#3362 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#3363 = VECTOR('',#3364,1.); +#3364 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3365 = ORIENTED_EDGE('',*,*,#3366,.T.); +#3366 = EDGE_CURVE('',#3359,#2803,#3367,.T.); +#3367 = LINE('',#3368,#3369); +#3368 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#3369 = VECTOR('',#3370,1.); +#3370 = DIRECTION('',(-0.,0.,-1.)); +#3371 = PLANE('',#3372); +#3372 = AXIS2_PLACEMENT_3D('',#3373,#3374,#3375); +#3373 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#3374 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3375 = DIRECTION('',(0.,0.,1.)); +#3376 = ADVANCED_FACE('',(#3377),#3395,.F.); +#3377 = FACE_BOUND('',#3378,.F.); +#3378 = EDGE_LOOP('',(#3379,#3387,#3388,#3389)); +#3379 = ORIENTED_EDGE('',*,*,#3380,.F.); +#3380 = EDGE_CURVE('',#2821,#3381,#3383,.T.); +#3381 = VERTEX_POINT('',#3382); +#3382 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#3383 = LINE('',#3384,#3385); +#3384 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3385 = VECTOR('',#3386,1.); +#3386 = DIRECTION('',(0.,0.,1.)); +#3387 = ORIENTED_EDGE('',*,*,#2828,.T.); +#3388 = ORIENTED_EDGE('',*,*,#3350,.T.); +#3389 = ORIENTED_EDGE('',*,*,#3390,.F.); +#3390 = EDGE_CURVE('',#3381,#3351,#3391,.T.); +#3391 = LINE('',#3392,#3393); +#3392 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#3393 = VECTOR('',#3394,1.); +#3394 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3395 = PLANE('',#3396); +#3396 = AXIS2_PLACEMENT_3D('',#3397,#3398,#3399); +#3397 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3398 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3399 = DIRECTION('',(0.,-0.,1.)); +#3400 = ADVANCED_FACE('',(#3401),#3419,.F.); +#3401 = FACE_BOUND('',#3402,.F.); +#3402 = EDGE_LOOP('',(#3403,#3404,#3405,#3413)); +#3403 = ORIENTED_EDGE('',*,*,#2820,.T.); +#3404 = ORIENTED_EDGE('',*,*,#3380,.T.); +#3405 = ORIENTED_EDGE('',*,*,#3406,.T.); +#3406 = EDGE_CURVE('',#3381,#3407,#3409,.T.); +#3407 = VERTEX_POINT('',#3408); +#3408 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#3409 = LINE('',#3410,#3411); +#3410 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#3411 = VECTOR('',#3412,1.); +#3412 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3413 = ORIENTED_EDGE('',*,*,#3414,.T.); +#3414 = EDGE_CURVE('',#3407,#2813,#3415,.T.); +#3415 = LINE('',#3416,#3417); +#3416 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3417 = VECTOR('',#3418,1.); +#3418 = DIRECTION('',(-0.,0.,-1.)); +#3419 = PLANE('',#3420); +#3420 = AXIS2_PLACEMENT_3D('',#3421,#3422,#3423); +#3421 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#3422 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3423 = DIRECTION('',(0.,0.,1.)); +#3424 = ADVANCED_FACE('',(#3425),#3436,.F.); +#3425 = FACE_BOUND('',#3426,.F.); +#3426 = EDGE_LOOP('',(#3427,#3428,#3434,#3435)); +#3427 = ORIENTED_EDGE('',*,*,#3414,.F.); +#3428 = ORIENTED_EDGE('',*,*,#3429,.T.); +#3429 = EDGE_CURVE('',#3407,#3359,#3430,.T.); +#3430 = LINE('',#3431,#3432); +#3431 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#3432 = VECTOR('',#3433,1.); +#3433 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3434 = ORIENTED_EDGE('',*,*,#3366,.T.); +#3435 = ORIENTED_EDGE('',*,*,#2812,.T.); +#3436 = PLANE('',#3437); +#3437 = AXIS2_PLACEMENT_3D('',#3438,#3439,#3440); +#3438 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3439 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3440 = DIRECTION('',(-0.,0.,-1.)); +#3441 = ADVANCED_FACE('',(#3442),#3467,.T.); +#3442 = FACE_BOUND('',#3443,.T.); +#3443 = EDGE_LOOP('',(#3444,#3445,#3453,#3461)); +#3444 = ORIENTED_EDGE('',*,*,#2836,.T.); +#3445 = ORIENTED_EDGE('',*,*,#3446,.T.); +#3446 = EDGE_CURVE('',#2839,#3447,#3449,.T.); +#3447 = VERTEX_POINT('',#3448); +#3448 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#3449 = LINE('',#3450,#3451); +#3450 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#3451 = VECTOR('',#3452,1.); +#3452 = DIRECTION('',(0.,0.,1.)); +#3453 = ORIENTED_EDGE('',*,*,#3454,.T.); +#3454 = EDGE_CURVE('',#3447,#3455,#3457,.T.); +#3455 = VERTEX_POINT('',#3456); +#3456 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#3457 = LINE('',#3458,#3459); +#3458 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#3459 = VECTOR('',#3460,1.); +#3460 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3461 = ORIENTED_EDGE('',*,*,#3462,.T.); +#3462 = EDGE_CURVE('',#3455,#2837,#3463,.T.); +#3463 = LINE('',#3464,#3465); +#3464 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#3465 = VECTOR('',#3466,1.); +#3466 = DIRECTION('',(-0.,0.,-1.)); +#3467 = PLANE('',#3468); +#3468 = AXIS2_PLACEMENT_3D('',#3469,#3470,#3471); +#3469 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#3470 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3471 = DIRECTION('',(0.,0.,1.)); +#3472 = ADVANCED_FACE('',(#3473),#3491,.F.); +#3473 = FACE_BOUND('',#3474,.F.); +#3474 = EDGE_LOOP('',(#3475,#3483,#3484,#3485)); +#3475 = ORIENTED_EDGE('',*,*,#3476,.F.); +#3476 = EDGE_CURVE('',#2855,#3477,#3479,.T.); +#3477 = VERTEX_POINT('',#3478); +#3478 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#3479 = LINE('',#3480,#3481); +#3480 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3481 = VECTOR('',#3482,1.); +#3482 = DIRECTION('',(0.,0.,1.)); +#3483 = ORIENTED_EDGE('',*,*,#2862,.T.); +#3484 = ORIENTED_EDGE('',*,*,#3446,.T.); +#3485 = ORIENTED_EDGE('',*,*,#3486,.F.); +#3486 = EDGE_CURVE('',#3477,#3447,#3487,.T.); +#3487 = LINE('',#3488,#3489); +#3488 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#3489 = VECTOR('',#3490,1.); +#3490 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3491 = PLANE('',#3492); +#3492 = AXIS2_PLACEMENT_3D('',#3493,#3494,#3495); +#3493 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3494 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3495 = DIRECTION('',(0.,-0.,1.)); +#3496 = ADVANCED_FACE('',(#3497),#3515,.F.); +#3497 = FACE_BOUND('',#3498,.F.); +#3498 = EDGE_LOOP('',(#3499,#3500,#3501,#3509)); +#3499 = ORIENTED_EDGE('',*,*,#2854,.T.); +#3500 = ORIENTED_EDGE('',*,*,#3476,.T.); +#3501 = ORIENTED_EDGE('',*,*,#3502,.T.); +#3502 = EDGE_CURVE('',#3477,#3503,#3505,.T.); +#3503 = VERTEX_POINT('',#3504); +#3504 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#3505 = LINE('',#3506,#3507); +#3506 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#3507 = VECTOR('',#3508,1.); +#3508 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3509 = ORIENTED_EDGE('',*,*,#3510,.T.); +#3510 = EDGE_CURVE('',#3503,#2847,#3511,.T.); +#3511 = LINE('',#3512,#3513); +#3512 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#3513 = VECTOR('',#3514,1.); +#3514 = DIRECTION('',(-0.,0.,-1.)); +#3515 = PLANE('',#3516); +#3516 = AXIS2_PLACEMENT_3D('',#3517,#3518,#3519); +#3517 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#3518 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3519 = DIRECTION('',(0.,0.,1.)); +#3520 = ADVANCED_FACE('',(#3521),#3532,.F.); +#3521 = FACE_BOUND('',#3522,.F.); +#3522 = EDGE_LOOP('',(#3523,#3524,#3530,#3531)); +#3523 = ORIENTED_EDGE('',*,*,#3510,.F.); +#3524 = ORIENTED_EDGE('',*,*,#3525,.T.); +#3525 = EDGE_CURVE('',#3503,#3455,#3526,.T.); +#3526 = LINE('',#3527,#3528); +#3527 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#3528 = VECTOR('',#3529,1.); +#3529 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3530 = ORIENTED_EDGE('',*,*,#3462,.T.); +#3531 = ORIENTED_EDGE('',*,*,#2846,.T.); +#3532 = PLANE('',#3533); +#3533 = AXIS2_PLACEMENT_3D('',#3534,#3535,#3536); +#3534 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#3535 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3536 = DIRECTION('',(-0.,0.,-1.)); +#3537 = ADVANCED_FACE('',(#3538),#3563,.T.); +#3538 = FACE_BOUND('',#3539,.T.); +#3539 = EDGE_LOOP('',(#3540,#3541,#3549,#3557)); +#3540 = ORIENTED_EDGE('',*,*,#2870,.T.); +#3541 = ORIENTED_EDGE('',*,*,#3542,.T.); +#3542 = EDGE_CURVE('',#2873,#3543,#3545,.T.); +#3543 = VERTEX_POINT('',#3544); +#3544 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#3545 = LINE('',#3546,#3547); +#3546 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#3547 = VECTOR('',#3548,1.); +#3548 = DIRECTION('',(0.,0.,1.)); +#3549 = ORIENTED_EDGE('',*,*,#3550,.T.); +#3550 = EDGE_CURVE('',#3543,#3551,#3553,.T.); +#3551 = VERTEX_POINT('',#3552); +#3552 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#3553 = LINE('',#3554,#3555); +#3554 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#3555 = VECTOR('',#3556,1.); +#3556 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3557 = ORIENTED_EDGE('',*,*,#3558,.T.); +#3558 = EDGE_CURVE('',#3551,#2871,#3559,.T.); +#3559 = LINE('',#3560,#3561); +#3560 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#3561 = VECTOR('',#3562,1.); +#3562 = DIRECTION('',(-0.,0.,-1.)); +#3563 = PLANE('',#3564); +#3564 = AXIS2_PLACEMENT_3D('',#3565,#3566,#3567); +#3565 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#3566 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3567 = DIRECTION('',(0.,0.,1.)); +#3568 = ADVANCED_FACE('',(#3569),#3587,.F.); +#3569 = FACE_BOUND('',#3570,.F.); +#3570 = EDGE_LOOP('',(#3571,#3579,#3580,#3581)); +#3571 = ORIENTED_EDGE('',*,*,#3572,.F.); +#3572 = EDGE_CURVE('',#2889,#3573,#3575,.T.); +#3573 = VERTEX_POINT('',#3574); +#3574 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#3575 = LINE('',#3576,#3577); +#3576 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3577 = VECTOR('',#3578,1.); +#3578 = DIRECTION('',(0.,0.,1.)); +#3579 = ORIENTED_EDGE('',*,*,#2896,.T.); +#3580 = ORIENTED_EDGE('',*,*,#3542,.T.); +#3581 = ORIENTED_EDGE('',*,*,#3582,.F.); +#3582 = EDGE_CURVE('',#3573,#3543,#3583,.T.); +#3583 = LINE('',#3584,#3585); +#3584 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#3585 = VECTOR('',#3586,1.); +#3586 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3587 = PLANE('',#3588); +#3588 = AXIS2_PLACEMENT_3D('',#3589,#3590,#3591); +#3589 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3590 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3591 = DIRECTION('',(0.,-0.,1.)); +#3592 = ADVANCED_FACE('',(#3593),#3611,.F.); +#3593 = FACE_BOUND('',#3594,.F.); +#3594 = EDGE_LOOP('',(#3595,#3596,#3597,#3605)); +#3595 = ORIENTED_EDGE('',*,*,#2888,.T.); +#3596 = ORIENTED_EDGE('',*,*,#3572,.T.); +#3597 = ORIENTED_EDGE('',*,*,#3598,.T.); +#3598 = EDGE_CURVE('',#3573,#3599,#3601,.T.); +#3599 = VERTEX_POINT('',#3600); +#3600 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#3601 = LINE('',#3602,#3603); +#3602 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#3603 = VECTOR('',#3604,1.); +#3604 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3605 = ORIENTED_EDGE('',*,*,#3606,.T.); +#3606 = EDGE_CURVE('',#3599,#2881,#3607,.T.); +#3607 = LINE('',#3608,#3609); +#3608 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3609 = VECTOR('',#3610,1.); +#3610 = DIRECTION('',(-0.,0.,-1.)); +#3611 = PLANE('',#3612); +#3612 = AXIS2_PLACEMENT_3D('',#3613,#3614,#3615); +#3613 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#3614 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3615 = DIRECTION('',(0.,0.,1.)); +#3616 = ADVANCED_FACE('',(#3617),#3628,.F.); +#3617 = FACE_BOUND('',#3618,.F.); +#3618 = EDGE_LOOP('',(#3619,#3620,#3626,#3627)); +#3619 = ORIENTED_EDGE('',*,*,#3606,.F.); +#3620 = ORIENTED_EDGE('',*,*,#3621,.T.); +#3621 = EDGE_CURVE('',#3599,#3551,#3622,.T.); +#3622 = LINE('',#3623,#3624); +#3623 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#3624 = VECTOR('',#3625,1.); +#3625 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3626 = ORIENTED_EDGE('',*,*,#3558,.T.); +#3627 = ORIENTED_EDGE('',*,*,#2880,.T.); +#3628 = PLANE('',#3629); +#3629 = AXIS2_PLACEMENT_3D('',#3630,#3631,#3632); +#3630 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3631 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3632 = DIRECTION('',(-0.,0.,-1.)); +#3633 = ADVANCED_FACE('',(#3634),#3691,.T.); +#3634 = FACE_BOUND('',#3635,.T.); +#3635 = EDGE_LOOP('',(#3636,#3646,#3654,#3662,#3668,#3669,#3677,#3685)); +#3636 = ORIENTED_EDGE('',*,*,#3637,.T.); +#3637 = EDGE_CURVE('',#3638,#3640,#3642,.T.); +#3638 = VERTEX_POINT('',#3639); +#3639 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#3640 = VERTEX_POINT('',#3641); +#3641 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#3642 = LINE('',#3643,#3644); +#3643 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#3644 = VECTOR('',#3645,1.); +#3645 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3646 = ORIENTED_EDGE('',*,*,#3647,.T.); +#3647 = EDGE_CURVE('',#3640,#3648,#3650,.T.); +#3648 = VERTEX_POINT('',#3649); +#3649 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#3650 = LINE('',#3651,#3652); +#3651 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#3652 = VECTOR('',#3653,1.); +#3653 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3654 = ORIENTED_EDGE('',*,*,#3655,.T.); +#3655 = EDGE_CURVE('',#3648,#3656,#3658,.T.); +#3656 = VERTEX_POINT('',#3657); +#3657 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#3658 = LINE('',#3659,#3660); +#3659 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#3660 = VECTOR('',#3661,1.); +#3661 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#3662 = ORIENTED_EDGE('',*,*,#3663,.T.); +#3663 = EDGE_CURVE('',#3656,#3220,#3664,.T.); +#3664 = LINE('',#3665,#3666); +#3665 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#3666 = VECTOR('',#3667,1.); +#3667 = DIRECTION('',(0.,0.,1.)); +#3668 = ORIENTED_EDGE('',*,*,#3217,.F.); +#3669 = ORIENTED_EDGE('',*,*,#3670,.T.); +#3670 = EDGE_CURVE('',#3218,#3671,#3673,.T.); +#3671 = VERTEX_POINT('',#3672); +#3672 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#3673 = LINE('',#3674,#3675); +#3674 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#3675 = VECTOR('',#3676,1.); +#3676 = DIRECTION('',(-0.,0.,-1.)); +#3677 = ORIENTED_EDGE('',*,*,#3678,.T.); +#3678 = EDGE_CURVE('',#3671,#3679,#3681,.T.); +#3679 = VERTEX_POINT('',#3680); +#3680 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#3681 = LINE('',#3682,#3683); +#3682 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#3683 = VECTOR('',#3684,1.); +#3684 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#3685 = ORIENTED_EDGE('',*,*,#3686,.T.); +#3686 = EDGE_CURVE('',#3679,#3638,#3687,.T.); +#3687 = LINE('',#3688,#3689); +#3688 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#3689 = VECTOR('',#3690,1.); +#3690 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#3691 = PLANE('',#3692); +#3692 = AXIS2_PLACEMENT_3D('',#3693,#3694,#3695); +#3693 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#3694 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3695 = DIRECTION('',(0.,0.,1.)); +#3696 = ADVANCED_FACE('',(#3697),#3715,.F.); +#3697 = FACE_BOUND('',#3698,.F.); +#3698 = EDGE_LOOP('',(#3699,#3707,#3713,#3714)); +#3699 = ORIENTED_EDGE('',*,*,#3700,.F.); +#3700 = EDGE_CURVE('',#3701,#3236,#3703,.T.); +#3701 = VERTEX_POINT('',#3702); +#3702 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3703 = LINE('',#3704,#3705); +#3704 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3705 = VECTOR('',#3706,1.); +#3706 = DIRECTION('',(0.,0.,1.)); +#3707 = ORIENTED_EDGE('',*,*,#3708,.T.); +#3708 = EDGE_CURVE('',#3701,#3656,#3709,.T.); +#3709 = LINE('',#3710,#3711); +#3710 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3711 = VECTOR('',#3712,1.); +#3712 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3713 = ORIENTED_EDGE('',*,*,#3663,.T.); +#3714 = ORIENTED_EDGE('',*,*,#3243,.F.); +#3715 = PLANE('',#3716); +#3716 = AXIS2_PLACEMENT_3D('',#3717,#3718,#3719); +#3717 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#3718 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3719 = DIRECTION('',(0.,-0.,1.)); +#3720 = ADVANCED_FACE('',(#3721),#3771,.F.); +#3721 = FACE_BOUND('',#3722,.F.); +#3722 = EDGE_LOOP('',(#3723,#3733,#3741,#3747,#3748,#3749,#3757,#3765)); +#3723 = ORIENTED_EDGE('',*,*,#3724,.T.); +#3724 = EDGE_CURVE('',#3725,#3727,#3729,.T.); +#3725 = VERTEX_POINT('',#3726); +#3726 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#3727 = VERTEX_POINT('',#3728); +#3728 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#3729 = LINE('',#3730,#3731); +#3730 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#3731 = VECTOR('',#3732,1.); +#3732 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3733 = ORIENTED_EDGE('',*,*,#3734,.T.); +#3734 = EDGE_CURVE('',#3727,#3735,#3737,.T.); +#3735 = VERTEX_POINT('',#3736); +#3736 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#3737 = LINE('',#3738,#3739); +#3738 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#3739 = VECTOR('',#3740,1.); +#3740 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3741 = ORIENTED_EDGE('',*,*,#3742,.T.); +#3742 = EDGE_CURVE('',#3735,#3701,#3743,.T.); +#3743 = LINE('',#3744,#3745); +#3744 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#3745 = VECTOR('',#3746,1.); +#3746 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#3747 = ORIENTED_EDGE('',*,*,#3700,.T.); +#3748 = ORIENTED_EDGE('',*,*,#3235,.F.); +#3749 = ORIENTED_EDGE('',*,*,#3750,.T.); +#3750 = EDGE_CURVE('',#3228,#3751,#3753,.T.); +#3751 = VERTEX_POINT('',#3752); +#3752 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#3753 = LINE('',#3754,#3755); +#3754 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3755 = VECTOR('',#3756,1.); +#3756 = DIRECTION('',(-0.,0.,-1.)); +#3757 = ORIENTED_EDGE('',*,*,#3758,.T.); +#3758 = EDGE_CURVE('',#3751,#3759,#3761,.T.); +#3759 = VERTEX_POINT('',#3760); +#3760 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#3761 = LINE('',#3762,#3763); +#3762 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#3763 = VECTOR('',#3764,1.); +#3764 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#3765 = ORIENTED_EDGE('',*,*,#3766,.T.); +#3766 = EDGE_CURVE('',#3759,#3725,#3767,.T.); +#3767 = LINE('',#3768,#3769); +#3768 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#3769 = VECTOR('',#3770,1.); +#3770 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#3771 = PLANE('',#3772); +#3772 = AXIS2_PLACEMENT_3D('',#3773,#3774,#3775); +#3773 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#3774 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3775 = DIRECTION('',(0.,0.,1.)); +#3776 = ADVANCED_FACE('',(#3777),#3788,.F.); +#3777 = FACE_BOUND('',#3778,.F.); +#3778 = EDGE_LOOP('',(#3779,#3780,#3781,#3782)); +#3779 = ORIENTED_EDGE('',*,*,#3750,.F.); +#3780 = ORIENTED_EDGE('',*,*,#3227,.F.); +#3781 = ORIENTED_EDGE('',*,*,#3670,.T.); +#3782 = ORIENTED_EDGE('',*,*,#3783,.F.); +#3783 = EDGE_CURVE('',#3751,#3671,#3784,.T.); +#3784 = LINE('',#3785,#3786); +#3785 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#3786 = VECTOR('',#3787,1.); +#3787 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3788 = PLANE('',#3789); +#3789 = AXIS2_PLACEMENT_3D('',#3790,#3791,#3792); +#3790 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#3791 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3792 = DIRECTION('',(-0.,0.,-1.)); +#3793 = ADVANCED_FACE('',(#3794),#3819,.T.); +#3794 = FACE_BOUND('',#3795,.T.); +#3795 = EDGE_LOOP('',(#3796,#3806,#3812,#3813)); +#3796 = ORIENTED_EDGE('',*,*,#3797,.T.); +#3797 = EDGE_CURVE('',#3798,#3800,#3802,.T.); +#3798 = VERTEX_POINT('',#3799); +#3799 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#3800 = VERTEX_POINT('',#3801); +#3801 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#3802 = LINE('',#3803,#3804); +#3803 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#3804 = VECTOR('',#3805,1.); +#3805 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3806 = ORIENTED_EDGE('',*,*,#3807,.T.); +#3807 = EDGE_CURVE('',#3800,#3266,#3808,.T.); +#3808 = LINE('',#3809,#3810); +#3809 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#3810 = VECTOR('',#3811,1.); +#3811 = DIRECTION('',(0.,0.,1.)); +#3812 = ORIENTED_EDGE('',*,*,#3263,.F.); +#3813 = ORIENTED_EDGE('',*,*,#3814,.T.); +#3814 = EDGE_CURVE('',#3264,#3798,#3815,.T.); +#3815 = LINE('',#3816,#3817); +#3816 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#3817 = VECTOR('',#3818,1.); +#3818 = DIRECTION('',(-0.,0.,-1.)); +#3819 = PLANE('',#3820); +#3820 = AXIS2_PLACEMENT_3D('',#3821,#3822,#3823); +#3821 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#3822 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3823 = DIRECTION('',(0.,0.,1.)); +#3824 = ADVANCED_FACE('',(#3825),#3843,.F.); +#3825 = FACE_BOUND('',#3826,.F.); +#3826 = EDGE_LOOP('',(#3827,#3835,#3841,#3842)); +#3827 = ORIENTED_EDGE('',*,*,#3828,.F.); +#3828 = EDGE_CURVE('',#3829,#3282,#3831,.T.); +#3829 = VERTEX_POINT('',#3830); +#3830 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#3831 = LINE('',#3832,#3833); +#3832 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3833 = VECTOR('',#3834,1.); +#3834 = DIRECTION('',(0.,0.,1.)); +#3835 = ORIENTED_EDGE('',*,*,#3836,.T.); +#3836 = EDGE_CURVE('',#3829,#3800,#3837,.T.); +#3837 = LINE('',#3838,#3839); +#3838 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#3839 = VECTOR('',#3840,1.); +#3840 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3841 = ORIENTED_EDGE('',*,*,#3807,.T.); +#3842 = ORIENTED_EDGE('',*,*,#3289,.F.); +#3843 = PLANE('',#3844); +#3844 = AXIS2_PLACEMENT_3D('',#3845,#3846,#3847); +#3845 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#3846 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3847 = DIRECTION('',(0.,-0.,1.)); +#3848 = ADVANCED_FACE('',(#3849),#3867,.F.); +#3849 = FACE_BOUND('',#3850,.F.); +#3850 = EDGE_LOOP('',(#3851,#3859,#3860,#3861)); +#3851 = ORIENTED_EDGE('',*,*,#3852,.T.); +#3852 = EDGE_CURVE('',#3853,#3829,#3855,.T.); +#3853 = VERTEX_POINT('',#3854); +#3854 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#3855 = LINE('',#3856,#3857); +#3856 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#3857 = VECTOR('',#3858,1.); +#3858 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3859 = ORIENTED_EDGE('',*,*,#3828,.T.); +#3860 = ORIENTED_EDGE('',*,*,#3281,.F.); +#3861 = ORIENTED_EDGE('',*,*,#3862,.T.); +#3862 = EDGE_CURVE('',#3274,#3853,#3863,.T.); +#3863 = LINE('',#3864,#3865); +#3864 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3865 = VECTOR('',#3866,1.); +#3866 = DIRECTION('',(-0.,0.,-1.)); +#3867 = PLANE('',#3868); +#3868 = AXIS2_PLACEMENT_3D('',#3869,#3870,#3871); +#3869 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#3870 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3871 = DIRECTION('',(0.,0.,1.)); +#3872 = ADVANCED_FACE('',(#3873),#3884,.F.); +#3873 = FACE_BOUND('',#3874,.F.); +#3874 = EDGE_LOOP('',(#3875,#3876,#3877,#3878)); +#3875 = ORIENTED_EDGE('',*,*,#3862,.F.); +#3876 = ORIENTED_EDGE('',*,*,#3273,.F.); +#3877 = ORIENTED_EDGE('',*,*,#3814,.T.); +#3878 = ORIENTED_EDGE('',*,*,#3879,.F.); +#3879 = EDGE_CURVE('',#3853,#3798,#3880,.T.); +#3880 = LINE('',#3881,#3882); +#3881 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#3882 = VECTOR('',#3883,1.); +#3883 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3884 = PLANE('',#3885); +#3885 = AXIS2_PLACEMENT_3D('',#3886,#3887,#3888); +#3886 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#3887 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3888 = DIRECTION('',(-0.,0.,-1.)); +#3889 = ADVANCED_FACE('',(#3890),#3947,.T.); +#3890 = FACE_BOUND('',#3891,.T.); +#3891 = EDGE_LOOP('',(#3892,#3902,#3910,#3918,#3924,#3925,#3933,#3941)); +#3892 = ORIENTED_EDGE('',*,*,#3893,.T.); +#3893 = EDGE_CURVE('',#3894,#3896,#3898,.T.); +#3894 = VERTEX_POINT('',#3895); +#3895 = CARTESIAN_POINT('',(4.68,0.351578947368,-3.2)); +#3896 = VERTEX_POINT('',#3897); +#3897 = CARTESIAN_POINT('',(4.68,-0.288421052632,-3.2)); +#3898 = LINE('',#3899,#3900); +#3899 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#3900 = VECTOR('',#3901,1.); +#3901 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3902 = ORIENTED_EDGE('',*,*,#3903,.T.); +#3903 = EDGE_CURVE('',#3896,#3904,#3906,.T.); +#3904 = VERTEX_POINT('',#3905); +#3905 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#3906 = LINE('',#3907,#3908); +#3907 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#3908 = VECTOR('',#3909,1.); +#3909 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3910 = ORIENTED_EDGE('',*,*,#3911,.T.); +#3911 = EDGE_CURVE('',#3904,#3912,#3914,.T.); +#3912 = VERTEX_POINT('',#3913); +#3913 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#3914 = LINE('',#3915,#3916); +#3915 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#3916 = VECTOR('',#3917,1.); +#3917 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#3918 = ORIENTED_EDGE('',*,*,#3919,.T.); +#3919 = EDGE_CURVE('',#3912,#3312,#3920,.T.); +#3920 = LINE('',#3921,#3922); +#3921 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#3922 = VECTOR('',#3923,1.); +#3923 = DIRECTION('',(0.,0.,1.)); +#3924 = ORIENTED_EDGE('',*,*,#3309,.F.); +#3925 = ORIENTED_EDGE('',*,*,#3926,.T.); +#3926 = EDGE_CURVE('',#3310,#3927,#3929,.T.); +#3927 = VERTEX_POINT('',#3928); +#3928 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#3929 = LINE('',#3930,#3931); +#3930 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#3931 = VECTOR('',#3932,1.); +#3932 = DIRECTION('',(-0.,0.,-1.)); +#3933 = ORIENTED_EDGE('',*,*,#3934,.T.); +#3934 = EDGE_CURVE('',#3927,#3935,#3937,.T.); +#3935 = VERTEX_POINT('',#3936); +#3936 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#3937 = LINE('',#3938,#3939); +#3938 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#3939 = VECTOR('',#3940,1.); +#3940 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#3941 = ORIENTED_EDGE('',*,*,#3942,.T.); +#3942 = EDGE_CURVE('',#3935,#3894,#3943,.T.); +#3943 = LINE('',#3944,#3945); +#3944 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#3945 = VECTOR('',#3946,1.); +#3946 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#3947 = PLANE('',#3948); +#3948 = AXIS2_PLACEMENT_3D('',#3949,#3950,#3951); +#3949 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#3950 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3951 = DIRECTION('',(0.,0.,1.)); +#3952 = ADVANCED_FACE('',(#3953),#3971,.F.); +#3953 = FACE_BOUND('',#3954,.F.); +#3954 = EDGE_LOOP('',(#3955,#3963,#3969,#3970)); +#3955 = ORIENTED_EDGE('',*,*,#3956,.F.); +#3956 = EDGE_CURVE('',#3957,#3328,#3959,.T.); +#3957 = VERTEX_POINT('',#3958); +#3958 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3959 = LINE('',#3960,#3961); +#3960 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3961 = VECTOR('',#3962,1.); +#3962 = DIRECTION('',(0.,0.,1.)); +#3963 = ORIENTED_EDGE('',*,*,#3964,.T.); +#3964 = EDGE_CURVE('',#3957,#3912,#3965,.T.); +#3965 = LINE('',#3966,#3967); +#3966 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3967 = VECTOR('',#3968,1.); +#3968 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#3969 = ORIENTED_EDGE('',*,*,#3919,.T.); +#3970 = ORIENTED_EDGE('',*,*,#3335,.F.); +#3971 = PLANE('',#3972); +#3972 = AXIS2_PLACEMENT_3D('',#3973,#3974,#3975); +#3973 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#3974 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#3975 = DIRECTION('',(0.,-0.,1.)); +#3976 = ADVANCED_FACE('',(#3977),#4027,.F.); +#3977 = FACE_BOUND('',#3978,.F.); +#3978 = EDGE_LOOP('',(#3979,#3989,#3997,#4003,#4004,#4005,#4013,#4021)); +#3979 = ORIENTED_EDGE('',*,*,#3980,.T.); +#3980 = EDGE_CURVE('',#3981,#3983,#3985,.T.); +#3981 = VERTEX_POINT('',#3982); +#3982 = CARTESIAN_POINT('',(5.32,0.351578947368,-3.2)); +#3983 = VERTEX_POINT('',#3984); +#3984 = CARTESIAN_POINT('',(5.32,-0.288421052632,-3.2)); +#3985 = LINE('',#3986,#3987); +#3986 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#3987 = VECTOR('',#3988,1.); +#3988 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#3989 = ORIENTED_EDGE('',*,*,#3990,.T.); +#3990 = EDGE_CURVE('',#3983,#3991,#3993,.T.); +#3991 = VERTEX_POINT('',#3992); +#3992 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#3993 = LINE('',#3994,#3995); +#3994 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#3995 = VECTOR('',#3996,1.); +#3996 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#3997 = ORIENTED_EDGE('',*,*,#3998,.T.); +#3998 = EDGE_CURVE('',#3991,#3957,#3999,.T.); +#3999 = LINE('',#4000,#4001); +#4000 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#4001 = VECTOR('',#4002,1.); +#4002 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#4003 = ORIENTED_EDGE('',*,*,#3956,.T.); +#4004 = ORIENTED_EDGE('',*,*,#3327,.F.); +#4005 = ORIENTED_EDGE('',*,*,#4006,.T.); +#4006 = EDGE_CURVE('',#3320,#4007,#4009,.T.); +#4007 = VERTEX_POINT('',#4008); +#4008 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4009 = LINE('',#4010,#4011); +#4010 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#4011 = VECTOR('',#4012,1.); +#4012 = DIRECTION('',(-0.,0.,-1.)); +#4013 = ORIENTED_EDGE('',*,*,#4014,.T.); +#4014 = EDGE_CURVE('',#4007,#4015,#4017,.T.); +#4015 = VERTEX_POINT('',#4016); +#4016 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4017 = LINE('',#4018,#4019); +#4018 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4019 = VECTOR('',#4020,1.); +#4020 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#4021 = ORIENTED_EDGE('',*,*,#4022,.T.); +#4022 = EDGE_CURVE('',#4015,#3981,#4023,.T.); +#4023 = LINE('',#4024,#4025); +#4024 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4025 = VECTOR('',#4026,1.); +#4026 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#4027 = PLANE('',#4028); +#4028 = AXIS2_PLACEMENT_3D('',#4029,#4030,#4031); +#4029 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#4030 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4031 = DIRECTION('',(0.,0.,1.)); +#4032 = ADVANCED_FACE('',(#4033),#4044,.F.); +#4033 = FACE_BOUND('',#4034,.F.); +#4034 = EDGE_LOOP('',(#4035,#4036,#4037,#4038)); +#4035 = ORIENTED_EDGE('',*,*,#4006,.F.); +#4036 = ORIENTED_EDGE('',*,*,#3319,.F.); +#4037 = ORIENTED_EDGE('',*,*,#3926,.T.); +#4038 = ORIENTED_EDGE('',*,*,#4039,.F.); +#4039 = EDGE_CURVE('',#4007,#3927,#4040,.T.); +#4040 = LINE('',#4041,#4042); +#4041 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4042 = VECTOR('',#4043,1.); +#4043 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4044 = PLANE('',#4045); +#4045 = AXIS2_PLACEMENT_3D('',#4046,#4047,#4048); +#4046 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#4047 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4048 = DIRECTION('',(-0.,0.,-1.)); +#4049 = ADVANCED_FACE('',(#4050),#4075,.F.); +#4050 = FACE_BOUND('',#4051,.T.); +#4051 = EDGE_LOOP('',(#4052,#4060,#4068,#4074)); +#4052 = ORIENTED_EDGE('',*,*,#4053,.F.); +#4053 = EDGE_CURVE('',#4054,#3351,#4056,.T.); +#4054 = VERTEX_POINT('',#4055); +#4055 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#4056 = LINE('',#4057,#4058); +#4057 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#4058 = VECTOR('',#4059,1.); +#4059 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#4060 = ORIENTED_EDGE('',*,*,#4061,.T.); +#4061 = EDGE_CURVE('',#4054,#4062,#4064,.T.); +#4062 = VERTEX_POINT('',#4063); +#4063 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#4064 = LINE('',#4065,#4066); +#4065 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#4066 = VECTOR('',#4067,1.); +#4067 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4068 = ORIENTED_EDGE('',*,*,#4069,.T.); +#4069 = EDGE_CURVE('',#4062,#3359,#4070,.T.); +#4070 = LINE('',#4071,#4072); +#4071 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#4072 = VECTOR('',#4073,1.); +#4073 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#4074 = ORIENTED_EDGE('',*,*,#3358,.F.); +#4075 = PLANE('',#4076); +#4076 = AXIS2_PLACEMENT_3D('',#4077,#4078,#4079); +#4077 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#4078 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4079 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#4080 = ADVANCED_FACE('',(#4081),#4099,.T.); +#4081 = FACE_BOUND('',#4082,.F.); +#4082 = EDGE_LOOP('',(#4083,#4091,#4092,#4093)); +#4083 = ORIENTED_EDGE('',*,*,#4084,.T.); +#4084 = EDGE_CURVE('',#4085,#3381,#4087,.T.); +#4085 = VERTEX_POINT('',#4086); +#4086 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#4087 = LINE('',#4088,#4089); +#4088 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#4089 = VECTOR('',#4090,1.); +#4090 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#4091 = ORIENTED_EDGE('',*,*,#3390,.T.); +#4092 = ORIENTED_EDGE('',*,*,#4053,.F.); +#4093 = ORIENTED_EDGE('',*,*,#4094,.F.); +#4094 = EDGE_CURVE('',#4085,#4054,#4095,.T.); +#4095 = LINE('',#4096,#4097); +#4096 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#4097 = VECTOR('',#4098,1.); +#4098 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4099 = PLANE('',#4100); +#4100 = AXIS2_PLACEMENT_3D('',#4101,#4102,#4103); +#4101 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#4102 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#4103 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#4104 = ADVANCED_FACE('',(#4105),#4123,.T.); +#4105 = FACE_BOUND('',#4106,.F.); +#4106 = EDGE_LOOP('',(#4107,#4108,#4116,#4122)); +#4107 = ORIENTED_EDGE('',*,*,#4084,.F.); +#4108 = ORIENTED_EDGE('',*,*,#4109,.T.); +#4109 = EDGE_CURVE('',#4085,#4110,#4112,.T.); +#4110 = VERTEX_POINT('',#4111); +#4111 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#4112 = LINE('',#4113,#4114); +#4113 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#4114 = VECTOR('',#4115,1.); +#4115 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4116 = ORIENTED_EDGE('',*,*,#4117,.T.); +#4117 = EDGE_CURVE('',#4110,#3407,#4118,.T.); +#4118 = LINE('',#4119,#4120); +#4119 = CARTESIAN_POINT('',(0.146666666667,0.146666666667,6.473333333333 + )); +#4120 = VECTOR('',#4121,1.); +#4121 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#4122 = ORIENTED_EDGE('',*,*,#3406,.F.); +#4123 = PLANE('',#4124); +#4124 = AXIS2_PLACEMENT_3D('',#4125,#4126,#4127); +#4125 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#4126 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4127 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#4128 = ADVANCED_FACE('',(#4129),#4140,.T.); +#4129 = FACE_BOUND('',#4130,.F.); +#4130 = EDGE_LOOP('',(#4131,#4132,#4138,#4139)); +#4131 = ORIENTED_EDGE('',*,*,#4117,.F.); +#4132 = ORIENTED_EDGE('',*,*,#4133,.T.); +#4133 = EDGE_CURVE('',#4110,#4062,#4134,.T.); +#4134 = LINE('',#4135,#4136); +#4135 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#4136 = VECTOR('',#4137,1.); +#4137 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4138 = ORIENTED_EDGE('',*,*,#4069,.T.); +#4139 = ORIENTED_EDGE('',*,*,#3429,.F.); +#4140 = PLANE('',#4141); +#4141 = AXIS2_PLACEMENT_3D('',#4142,#4143,#4144); +#4142 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#4143 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#4144 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#4145 = ADVANCED_FACE('',(#4146),#4171,.F.); +#4146 = FACE_BOUND('',#4147,.T.); +#4147 = EDGE_LOOP('',(#4148,#4156,#4164,#4170)); +#4148 = ORIENTED_EDGE('',*,*,#4149,.F.); +#4149 = EDGE_CURVE('',#4150,#3447,#4152,.T.); +#4150 = VERTEX_POINT('',#4151); +#4151 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#4152 = LINE('',#4153,#4154); +#4153 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#4154 = VECTOR('',#4155,1.); +#4155 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#4156 = ORIENTED_EDGE('',*,*,#4157,.T.); +#4157 = EDGE_CURVE('',#4150,#4158,#4160,.T.); +#4158 = VERTEX_POINT('',#4159); +#4159 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#4160 = LINE('',#4161,#4162); +#4161 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#4162 = VECTOR('',#4163,1.); +#4163 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4164 = ORIENTED_EDGE('',*,*,#4165,.T.); +#4165 = EDGE_CURVE('',#4158,#3455,#4166,.T.); +#4166 = LINE('',#4167,#4168); +#4167 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#4168 = VECTOR('',#4169,1.); +#4169 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#4170 = ORIENTED_EDGE('',*,*,#3454,.F.); +#4171 = PLANE('',#4172); +#4172 = AXIS2_PLACEMENT_3D('',#4173,#4174,#4175); +#4173 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#4174 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4175 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#4176 = ADVANCED_FACE('',(#4177),#4195,.T.); +#4177 = FACE_BOUND('',#4178,.F.); +#4178 = EDGE_LOOP('',(#4179,#4187,#4188,#4189)); +#4179 = ORIENTED_EDGE('',*,*,#4180,.T.); +#4180 = EDGE_CURVE('',#4181,#3477,#4183,.T.); +#4181 = VERTEX_POINT('',#4182); +#4182 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#4183 = LINE('',#4184,#4185); +#4184 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#4185 = VECTOR('',#4186,1.); +#4186 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#4187 = ORIENTED_EDGE('',*,*,#3486,.T.); +#4188 = ORIENTED_EDGE('',*,*,#4149,.F.); +#4189 = ORIENTED_EDGE('',*,*,#4190,.F.); +#4190 = EDGE_CURVE('',#4181,#4150,#4191,.T.); +#4191 = LINE('',#4192,#4193); +#4192 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#4193 = VECTOR('',#4194,1.); +#4194 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4195 = PLANE('',#4196); +#4196 = AXIS2_PLACEMENT_3D('',#4197,#4198,#4199); +#4197 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#4198 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#4199 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#4200 = ADVANCED_FACE('',(#4201),#4219,.T.); +#4201 = FACE_BOUND('',#4202,.F.); +#4202 = EDGE_LOOP('',(#4203,#4204,#4212,#4218)); +#4203 = ORIENTED_EDGE('',*,*,#4180,.F.); +#4204 = ORIENTED_EDGE('',*,*,#4205,.T.); +#4205 = EDGE_CURVE('',#4181,#4206,#4208,.T.); +#4206 = VERTEX_POINT('',#4207); +#4207 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#4208 = LINE('',#4209,#4210); +#4209 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#4210 = VECTOR('',#4211,1.); +#4211 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4212 = ORIENTED_EDGE('',*,*,#4213,.T.); +#4213 = EDGE_CURVE('',#4206,#3503,#4214,.T.); +#4214 = LINE('',#4215,#4216); +#4215 = CARTESIAN_POINT('',(5.146666666667,0.146666666667,6.473333333333 + )); +#4216 = VECTOR('',#4217,1.); +#4217 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#4218 = ORIENTED_EDGE('',*,*,#3502,.F.); +#4219 = PLANE('',#4220); +#4220 = AXIS2_PLACEMENT_3D('',#4221,#4222,#4223); +#4221 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#4222 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4223 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#4224 = ADVANCED_FACE('',(#4225),#4236,.T.); +#4225 = FACE_BOUND('',#4226,.F.); +#4226 = EDGE_LOOP('',(#4227,#4228,#4234,#4235)); +#4227 = ORIENTED_EDGE('',*,*,#4213,.F.); +#4228 = ORIENTED_EDGE('',*,*,#4229,.T.); +#4229 = EDGE_CURVE('',#4206,#4158,#4230,.T.); +#4230 = LINE('',#4231,#4232); +#4231 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#4232 = VECTOR('',#4233,1.); +#4233 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4234 = ORIENTED_EDGE('',*,*,#4165,.T.); +#4235 = ORIENTED_EDGE('',*,*,#3525,.F.); +#4236 = PLANE('',#4237); +#4237 = AXIS2_PLACEMENT_3D('',#4238,#4239,#4240); +#4238 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#4239 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#4240 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#4241 = ADVANCED_FACE('',(#4242),#4267,.F.); +#4242 = FACE_BOUND('',#4243,.T.); +#4243 = EDGE_LOOP('',(#4244,#4252,#4260,#4266)); +#4244 = ORIENTED_EDGE('',*,*,#4245,.F.); +#4245 = EDGE_CURVE('',#4246,#3543,#4248,.T.); +#4246 = VERTEX_POINT('',#4247); +#4247 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#4248 = LINE('',#4249,#4250); +#4249 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#4250 = VECTOR('',#4251,1.); +#4251 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#4252 = ORIENTED_EDGE('',*,*,#4253,.T.); +#4253 = EDGE_CURVE('',#4246,#4254,#4256,.T.); +#4254 = VERTEX_POINT('',#4255); +#4255 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#4256 = LINE('',#4257,#4258); +#4257 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#4258 = VECTOR('',#4259,1.); +#4259 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4260 = ORIENTED_EDGE('',*,*,#4261,.T.); +#4261 = EDGE_CURVE('',#4254,#3551,#4262,.T.); +#4262 = LINE('',#4263,#4264); +#4263 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#4264 = VECTOR('',#4265,1.); +#4265 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#4266 = ORIENTED_EDGE('',*,*,#3550,.F.); +#4267 = PLANE('',#4268); +#4268 = AXIS2_PLACEMENT_3D('',#4269,#4270,#4271); +#4269 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#4270 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4271 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#4272 = ADVANCED_FACE('',(#4273),#4291,.T.); +#4273 = FACE_BOUND('',#4274,.F.); +#4274 = EDGE_LOOP('',(#4275,#4283,#4284,#4285)); +#4275 = ORIENTED_EDGE('',*,*,#4276,.F.); +#4276 = EDGE_CURVE('',#3573,#4277,#4279,.T.); +#4277 = VERTEX_POINT('',#4278); +#4278 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#4279 = LINE('',#4280,#4281); +#4280 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#4281 = VECTOR('',#4282,1.); +#4282 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#4283 = ORIENTED_EDGE('',*,*,#3582,.T.); +#4284 = ORIENTED_EDGE('',*,*,#4245,.F.); +#4285 = ORIENTED_EDGE('',*,*,#4286,.F.); +#4286 = EDGE_CURVE('',#4277,#4246,#4287,.T.); +#4287 = LINE('',#4288,#4289); +#4288 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#4289 = VECTOR('',#4290,1.); +#4290 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4291 = PLANE('',#4292); +#4292 = AXIS2_PLACEMENT_3D('',#4293,#4294,#4295); +#4293 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#4294 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#4295 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#4296 = ADVANCED_FACE('',(#4297),#4315,.T.); +#4297 = FACE_BOUND('',#4298,.F.); +#4298 = EDGE_LOOP('',(#4299,#4300,#4308,#4314)); +#4299 = ORIENTED_EDGE('',*,*,#4276,.T.); +#4300 = ORIENTED_EDGE('',*,*,#4301,.T.); +#4301 = EDGE_CURVE('',#4277,#4302,#4304,.T.); +#4302 = VERTEX_POINT('',#4303); +#4303 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#4304 = LINE('',#4305,#4306); +#4305 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#4306 = VECTOR('',#4307,1.); +#4307 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4308 = ORIENTED_EDGE('',*,*,#4309,.T.); +#4309 = EDGE_CURVE('',#4302,#3599,#4310,.T.); +#4310 = LINE('',#4311,#4312); +#4311 = CARTESIAN_POINT('',(2.646666666667,0.146666666667,6.473333333333 + )); +#4312 = VECTOR('',#4313,1.); +#4313 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#4314 = ORIENTED_EDGE('',*,*,#3598,.F.); +#4315 = PLANE('',#4316); +#4316 = AXIS2_PLACEMENT_3D('',#4317,#4318,#4319); +#4317 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#4318 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4319 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#4320 = ADVANCED_FACE('',(#4321),#4332,.T.); +#4321 = FACE_BOUND('',#4322,.F.); +#4322 = EDGE_LOOP('',(#4323,#4324,#4330,#4331)); +#4323 = ORIENTED_EDGE('',*,*,#4309,.F.); +#4324 = ORIENTED_EDGE('',*,*,#4325,.T.); +#4325 = EDGE_CURVE('',#4302,#4254,#4326,.T.); +#4326 = LINE('',#4327,#4328); +#4327 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#4328 = VECTOR('',#4329,1.); +#4329 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4330 = ORIENTED_EDGE('',*,*,#4261,.T.); +#4331 = ORIENTED_EDGE('',*,*,#3621,.F.); +#4332 = PLANE('',#4333); +#4333 = AXIS2_PLACEMENT_3D('',#4334,#4335,#4336); +#4334 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#4335 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#4336 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#4337 = ADVANCED_FACE('',(#4338),#4379,.F.); +#4338 = FACE_BOUND('',#4339,.T.); +#4339 = EDGE_LOOP('',(#4340,#4350,#4358,#4366,#4372,#4373)); +#4340 = ORIENTED_EDGE('',*,*,#4341,.F.); +#4341 = EDGE_CURVE('',#4342,#4344,#4346,.T.); +#4342 = VERTEX_POINT('',#4343); +#4343 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#4344 = VERTEX_POINT('',#4345); +#4345 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#4346 = LINE('',#4347,#4348); +#4347 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#4348 = VECTOR('',#4349,1.); +#4349 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#4350 = ORIENTED_EDGE('',*,*,#4351,.T.); +#4351 = EDGE_CURVE('',#4342,#4352,#4354,.T.); +#4352 = VERTEX_POINT('',#4353); +#4353 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#4354 = LINE('',#4355,#4356); +#4355 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#4356 = VECTOR('',#4357,1.); +#4357 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4358 = ORIENTED_EDGE('',*,*,#4359,.T.); +#4359 = EDGE_CURVE('',#4352,#4360,#4362,.T.); +#4360 = VERTEX_POINT('',#4361); +#4361 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#4362 = LINE('',#4363,#4364); +#4363 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#4364 = VECTOR('',#4365,1.); +#4365 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#4366 = ORIENTED_EDGE('',*,*,#4367,.T.); +#4367 = EDGE_CURVE('',#4360,#3640,#4368,.T.); +#4368 = LINE('',#4369,#4370); +#4369 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#4370 = VECTOR('',#4371,1.); +#4371 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4372 = ORIENTED_EDGE('',*,*,#3637,.F.); +#4373 = ORIENTED_EDGE('',*,*,#4374,.F.); +#4374 = EDGE_CURVE('',#4344,#3638,#4375,.T.); +#4375 = LINE('',#4376,#4377); +#4376 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#4377 = VECTOR('',#4378,1.); +#4378 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4379 = PLANE('',#4380); +#4380 = AXIS2_PLACEMENT_3D('',#4381,#4382,#4383); +#4381 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#4382 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4383 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#4384 = ADVANCED_FACE('',(#4385),#4410,.F.); +#4385 = FACE_BOUND('',#4386,.F.); +#4386 = EDGE_LOOP('',(#4387,#4388,#4394,#4395,#4396,#4404)); +#4387 = ORIENTED_EDGE('',*,*,#3766,.F.); +#4388 = ORIENTED_EDGE('',*,*,#4389,.T.); +#4389 = EDGE_CURVE('',#3759,#3679,#4390,.T.); +#4390 = LINE('',#4391,#4392); +#4391 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#4392 = VECTOR('',#4393,1.); +#4393 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4394 = ORIENTED_EDGE('',*,*,#3686,.T.); +#4395 = ORIENTED_EDGE('',*,*,#4374,.F.); +#4396 = ORIENTED_EDGE('',*,*,#4397,.F.); +#4397 = EDGE_CURVE('',#4398,#4344,#4400,.T.); +#4398 = VERTEX_POINT('',#4399); +#4399 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#4400 = LINE('',#4401,#4402); +#4401 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#4402 = VECTOR('',#4403,1.); +#4403 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4404 = ORIENTED_EDGE('',*,*,#4405,.T.); +#4405 = EDGE_CURVE('',#4398,#3725,#4406,.T.); +#4406 = LINE('',#4407,#4408); +#4407 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#4408 = VECTOR('',#4409,1.); +#4409 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4410 = PLANE('',#4411); +#4411 = AXIS2_PLACEMENT_3D('',#4412,#4413,#4414); +#4412 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#4413 = DIRECTION('',(-1.209660753807E-16,-0.987762965329,0.155962573473 + )); +#4414 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#4415 = ADVANCED_FACE('',(#4416),#4422,.F.); +#4416 = FACE_BOUND('',#4417,.F.); +#4417 = EDGE_LOOP('',(#4418,#4419,#4420,#4421)); +#4418 = ORIENTED_EDGE('',*,*,#3783,.T.); +#4419 = ORIENTED_EDGE('',*,*,#3678,.T.); +#4420 = ORIENTED_EDGE('',*,*,#4389,.F.); +#4421 = ORIENTED_EDGE('',*,*,#3758,.F.); +#4422 = PLANE('',#4423); +#4423 = AXIS2_PLACEMENT_3D('',#4424,#4425,#4426); +#4424 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#4425 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#4426 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#4427 = ADVANCED_FACE('',(#4428),#4439,.F.); +#4428 = FACE_BOUND('',#4429,.F.); +#4429 = EDGE_LOOP('',(#4430,#4436,#4437,#4438)); +#4430 = ORIENTED_EDGE('',*,*,#4431,.T.); +#4431 = EDGE_CURVE('',#3735,#3648,#4432,.T.); +#4432 = LINE('',#4433,#4434); +#4433 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#4434 = VECTOR('',#4435,1.); +#4435 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4436 = ORIENTED_EDGE('',*,*,#3655,.T.); +#4437 = ORIENTED_EDGE('',*,*,#3708,.F.); +#4438 = ORIENTED_EDGE('',*,*,#3742,.F.); +#4439 = PLANE('',#4440); +#4440 = AXIS2_PLACEMENT_3D('',#4441,#4442,#4443); +#4441 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#4442 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#4443 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#4444 = ADVANCED_FACE('',(#4445),#4465,.F.); +#4445 = FACE_BOUND('',#4446,.F.); +#4446 = EDGE_LOOP('',(#4447,#4448,#4456,#4462,#4463,#4464)); +#4447 = ORIENTED_EDGE('',*,*,#3734,.F.); +#4448 = ORIENTED_EDGE('',*,*,#4449,.F.); +#4449 = EDGE_CURVE('',#4450,#3727,#4452,.T.); +#4450 = VERTEX_POINT('',#4451); +#4451 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#4452 = LINE('',#4453,#4454); +#4453 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#4454 = VECTOR('',#4455,1.); +#4455 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4456 = ORIENTED_EDGE('',*,*,#4457,.T.); +#4457 = EDGE_CURVE('',#4450,#4360,#4458,.T.); +#4458 = LINE('',#4459,#4460); +#4459 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#4460 = VECTOR('',#4461,1.); +#4461 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4462 = ORIENTED_EDGE('',*,*,#4367,.T.); +#4463 = ORIENTED_EDGE('',*,*,#3647,.T.); +#4464 = ORIENTED_EDGE('',*,*,#4431,.F.); +#4465 = PLANE('',#4466); +#4466 = AXIS2_PLACEMENT_3D('',#4467,#4468,#4469); +#4467 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#4468 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473) + ); +#4469 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#4470 = ADVANCED_FACE('',(#4471),#4498,.T.); +#4471 = FACE_BOUND('',#4472,.F.); +#4472 = EDGE_LOOP('',(#4473,#4481,#4489,#4495,#4496,#4497)); +#4473 = ORIENTED_EDGE('',*,*,#4474,.F.); +#4474 = EDGE_CURVE('',#4475,#4398,#4477,.T.); +#4475 = VERTEX_POINT('',#4476); +#4476 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#4477 = LINE('',#4478,#4479); +#4478 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225) + ); +#4479 = VECTOR('',#4480,1.); +#4480 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#4481 = ORIENTED_EDGE('',*,*,#4482,.T.); +#4482 = EDGE_CURVE('',#4475,#4483,#4485,.T.); +#4483 = VERTEX_POINT('',#4484); +#4484 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#4485 = LINE('',#4486,#4487); +#4486 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#4487 = VECTOR('',#4488,1.); +#4488 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4489 = ORIENTED_EDGE('',*,*,#4490,.T.); +#4490 = EDGE_CURVE('',#4483,#4450,#4491,.T.); +#4491 = LINE('',#4492,#4493); +#4492 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#4493 = VECTOR('',#4494,1.); +#4494 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#4495 = ORIENTED_EDGE('',*,*,#4449,.T.); +#4496 = ORIENTED_EDGE('',*,*,#3724,.F.); +#4497 = ORIENTED_EDGE('',*,*,#4405,.F.); +#4498 = PLANE('',#4499); +#4499 = AXIS2_PLACEMENT_3D('',#4500,#4501,#4502); +#4500 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#4501 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4502 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#4503 = ADVANCED_FACE('',(#4504),#4529,.F.); +#4504 = FACE_BOUND('',#4505,.T.); +#4505 = EDGE_LOOP('',(#4506,#4514,#4522,#4528)); +#4506 = ORIENTED_EDGE('',*,*,#4507,.F.); +#4507 = EDGE_CURVE('',#4508,#3798,#4510,.T.); +#4508 = VERTEX_POINT('',#4509); +#4509 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#4510 = LINE('',#4511,#4512); +#4511 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#4512 = VECTOR('',#4513,1.); +#4513 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#4514 = ORIENTED_EDGE('',*,*,#4515,.T.); +#4515 = EDGE_CURVE('',#4508,#4516,#4518,.T.); +#4516 = VERTEX_POINT('',#4517); +#4517 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#4518 = LINE('',#4519,#4520); +#4519 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#4520 = VECTOR('',#4521,1.); +#4521 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4522 = ORIENTED_EDGE('',*,*,#4523,.T.); +#4523 = EDGE_CURVE('',#4516,#3800,#4524,.T.); +#4524 = LINE('',#4525,#4526); +#4525 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#4526 = VECTOR('',#4527,1.); +#4527 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#4528 = ORIENTED_EDGE('',*,*,#3797,.F.); +#4529 = PLANE('',#4530); +#4530 = AXIS2_PLACEMENT_3D('',#4531,#4532,#4533); +#4531 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#4532 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4533 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#4534 = ADVANCED_FACE('',(#4535),#4553,.T.); +#4535 = FACE_BOUND('',#4536,.F.); +#4536 = EDGE_LOOP('',(#4537,#4545,#4551,#4552)); +#4537 = ORIENTED_EDGE('',*,*,#4538,.F.); +#4538 = EDGE_CURVE('',#4539,#3829,#4541,.T.); +#4539 = VERTEX_POINT('',#4540); +#4540 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#4541 = LINE('',#4542,#4543); +#4542 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#4543 = VECTOR('',#4544,1.); +#4544 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#4545 = ORIENTED_EDGE('',*,*,#4546,.T.); +#4546 = EDGE_CURVE('',#4539,#4516,#4547,.T.); +#4547 = LINE('',#4548,#4549); +#4548 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#4549 = VECTOR('',#4550,1.); +#4550 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4551 = ORIENTED_EDGE('',*,*,#4523,.T.); +#4552 = ORIENTED_EDGE('',*,*,#3836,.F.); +#4553 = PLANE('',#4554); +#4554 = AXIS2_PLACEMENT_3D('',#4555,#4556,#4557); +#4555 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#4556 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#4557 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#4558 = ADVANCED_FACE('',(#4559),#4577,.T.); +#4559 = FACE_BOUND('',#4560,.F.); +#4560 = EDGE_LOOP('',(#4561,#4569,#4575,#4576)); +#4561 = ORIENTED_EDGE('',*,*,#4562,.F.); +#4562 = EDGE_CURVE('',#4563,#3853,#4565,.T.); +#4563 = VERTEX_POINT('',#4564); +#4564 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#4565 = LINE('',#4566,#4567); +#4566 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#4567 = VECTOR('',#4568,1.); +#4568 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#4569 = ORIENTED_EDGE('',*,*,#4570,.T.); +#4570 = EDGE_CURVE('',#4563,#4539,#4571,.T.); +#4571 = LINE('',#4572,#4573); +#4572 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#4573 = VECTOR('',#4574,1.); +#4574 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4575 = ORIENTED_EDGE('',*,*,#4538,.T.); +#4576 = ORIENTED_EDGE('',*,*,#3852,.F.); +#4577 = PLANE('',#4578); +#4578 = AXIS2_PLACEMENT_3D('',#4579,#4580,#4581); +#4579 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#4580 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4581 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#4582 = ADVANCED_FACE('',(#4583),#4594,.T.); +#4583 = FACE_BOUND('',#4584,.T.); +#4584 = EDGE_LOOP('',(#4585,#4586,#4592,#4593)); +#4585 = ORIENTED_EDGE('',*,*,#4562,.F.); +#4586 = ORIENTED_EDGE('',*,*,#4587,.T.); +#4587 = EDGE_CURVE('',#4563,#4508,#4588,.T.); +#4588 = LINE('',#4589,#4590); +#4589 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#4590 = VECTOR('',#4591,1.); +#4591 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4592 = ORIENTED_EDGE('',*,*,#4507,.T.); +#4593 = ORIENTED_EDGE('',*,*,#3879,.F.); +#4594 = PLANE('',#4595); +#4595 = AXIS2_PLACEMENT_3D('',#4596,#4597,#4598); +#4596 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#4597 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187) + ); +#4598 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#4599 = ADVANCED_FACE('',(#4600),#4641,.F.); +#4600 = FACE_BOUND('',#4601,.T.); +#4601 = EDGE_LOOP('',(#4602,#4612,#4620,#4628,#4634,#4635)); +#4602 = ORIENTED_EDGE('',*,*,#4603,.F.); +#4603 = EDGE_CURVE('',#4604,#4606,#4608,.T.); +#4604 = VERTEX_POINT('',#4605); +#4605 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#4606 = VERTEX_POINT('',#4607); +#4607 = CARTESIAN_POINT('',(4.682447406934,0.351192514695, + -3.202447406934)); +#4608 = LINE('',#4609,#4610); +#4609 = CARTESIAN_POINT('',(4.846150901889,0.159613036666, + -3.366150901889)); +#4610 = VECTOR('',#4611,1.); +#4611 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#4612 = ORIENTED_EDGE('',*,*,#4613,.T.); +#4613 = EDGE_CURVE('',#4604,#4614,#4616,.T.); +#4614 = VERTEX_POINT('',#4615); +#4615 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#4616 = LINE('',#4617,#4618); +#4617 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#4618 = VECTOR('',#4619,1.); +#4619 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4620 = ORIENTED_EDGE('',*,*,#4621,.T.); +#4621 = EDGE_CURVE('',#4614,#4622,#4624,.T.); +#4622 = VERTEX_POINT('',#4623); +#4623 = CARTESIAN_POINT('',(4.682447406934,-0.288807485305, + -3.202447406934)); +#4624 = LINE('',#4625,#4626); +#4625 = CARTESIAN_POINT('',(4.961511443392,-5.034896900541E-02, + -3.481511443392)); +#4626 = VECTOR('',#4627,1.); +#4627 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#4628 = ORIENTED_EDGE('',*,*,#4629,.T.); +#4629 = EDGE_CURVE('',#4622,#3896,#4630,.T.); +#4630 = LINE('',#4631,#4632); +#4631 = CARTESIAN_POINT('',(4.914309165527,-0.325417236662, + -3.434309165527)); +#4632 = VECTOR('',#4633,1.); +#4633 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4634 = ORIENTED_EDGE('',*,*,#3893,.F.); +#4635 = ORIENTED_EDGE('',*,*,#4636,.F.); +#4636 = EDGE_CURVE('',#4606,#3894,#4637,.T.); +#4637 = LINE('',#4638,#4639); +#4638 = CARTESIAN_POINT('',(4.458413132695,0.386566347469, + -2.978413132695)); +#4639 = VECTOR('',#4640,1.); +#4640 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#4641 = PLANE('',#4642); +#4642 = AXIS2_PLACEMENT_3D('',#4643,#4644,#4645); +#4643 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#4644 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#4645 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#4646 = ADVANCED_FACE('',(#4647),#4672,.F.); +#4647 = FACE_BOUND('',#4648,.F.); +#4648 = EDGE_LOOP('',(#4649,#4650,#4656,#4657,#4658,#4666)); +#4649 = ORIENTED_EDGE('',*,*,#4022,.F.); +#4650 = ORIENTED_EDGE('',*,*,#4651,.T.); +#4651 = EDGE_CURVE('',#4015,#3935,#4652,.T.); +#4652 = LINE('',#4653,#4654); +#4653 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4654 = VECTOR('',#4655,1.); +#4655 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4656 = ORIENTED_EDGE('',*,*,#3942,.T.); +#4657 = ORIENTED_EDGE('',*,*,#4636,.F.); +#4658 = ORIENTED_EDGE('',*,*,#4659,.F.); +#4659 = EDGE_CURVE('',#4660,#4606,#4662,.T.); +#4660 = VERTEX_POINT('',#4661); +#4661 = CARTESIAN_POINT('',(5.317552593066,0.351192514695, + -3.202447406934)); +#4662 = LINE('',#4663,#4664); +#4663 = CARTESIAN_POINT('',(5.32,0.351192514695,-3.202447406934)); +#4664 = VECTOR('',#4665,1.); +#4665 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4666 = ORIENTED_EDGE('',*,*,#4667,.T.); +#4667 = EDGE_CURVE('',#4660,#3981,#4668,.T.); +#4668 = LINE('',#4669,#4670); +#4669 = CARTESIAN_POINT('',(5.699616963064,0.411518467852, + -2.820383036936)); +#4670 = VECTOR('',#4671,1.); +#4671 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4672 = PLANE('',#4673); +#4673 = AXIS2_PLACEMENT_3D('',#4674,#4675,#4676); +#4674 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#4675 = DIRECTION('',(-1.209660753807E-16,-0.987762965329,0.155962573473 + )); +#4676 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#4677 = ADVANCED_FACE('',(#4678),#4684,.F.); +#4678 = FACE_BOUND('',#4679,.F.); +#4679 = EDGE_LOOP('',(#4680,#4681,#4682,#4683)); +#4680 = ORIENTED_EDGE('',*,*,#4039,.T.); +#4681 = ORIENTED_EDGE('',*,*,#3934,.T.); +#4682 = ORIENTED_EDGE('',*,*,#4651,.F.); +#4683 = ORIENTED_EDGE('',*,*,#4014,.F.); +#4684 = PLANE('',#4685); +#4685 = AXIS2_PLACEMENT_3D('',#4686,#4687,#4688); +#4686 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#4687 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#4688 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#4689 = ADVANCED_FACE('',(#4690),#4701,.F.); +#4690 = FACE_BOUND('',#4691,.F.); +#4691 = EDGE_LOOP('',(#4692,#4698,#4699,#4700)); +#4692 = ORIENTED_EDGE('',*,*,#4693,.T.); +#4693 = EDGE_CURVE('',#3991,#3904,#4694,.T.); +#4694 = LINE('',#4695,#4696); +#4695 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#4696 = VECTOR('',#4697,1.); +#4697 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4698 = ORIENTED_EDGE('',*,*,#3911,.T.); +#4699 = ORIENTED_EDGE('',*,*,#3964,.F.); +#4700 = ORIENTED_EDGE('',*,*,#3998,.F.); +#4701 = PLANE('',#4702); +#4702 = AXIS2_PLACEMENT_3D('',#4703,#4704,#4705); +#4703 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#4704 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#4705 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#4706 = ADVANCED_FACE('',(#4707),#4727,.F.); +#4707 = FACE_BOUND('',#4708,.F.); +#4708 = EDGE_LOOP('',(#4709,#4710,#4718,#4724,#4725,#4726)); +#4709 = ORIENTED_EDGE('',*,*,#3990,.F.); +#4710 = ORIENTED_EDGE('',*,*,#4711,.F.); +#4711 = EDGE_CURVE('',#4712,#3983,#4714,.T.); +#4712 = VERTEX_POINT('',#4713); +#4713 = CARTESIAN_POINT('',(5.317552593066,-0.288807485305, + -3.202447406934)); +#4714 = LINE('',#4715,#4716); +#4715 = CARTESIAN_POINT('',(5.243720930233,-0.300465116279, + -3.276279069767)); +#4716 = VECTOR('',#4717,1.); +#4717 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#4718 = ORIENTED_EDGE('',*,*,#4719,.T.); +#4719 = EDGE_CURVE('',#4712,#4622,#4720,.T.); +#4720 = LINE('',#4721,#4722); +#4721 = CARTESIAN_POINT('',(5.32,-0.288807485305,-3.202447406934)); +#4722 = VECTOR('',#4723,1.); +#4723 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4724 = ORIENTED_EDGE('',*,*,#4629,.T.); +#4725 = ORIENTED_EDGE('',*,*,#3903,.T.); +#4726 = ORIENTED_EDGE('',*,*,#4693,.F.); +#4727 = PLANE('',#4728); +#4728 = AXIS2_PLACEMENT_3D('',#4729,#4730,#4731); +#4729 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#4730 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473) + ); +#4731 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#4732 = ADVANCED_FACE('',(#4733),#4760,.T.); +#4733 = FACE_BOUND('',#4734,.F.); +#4734 = EDGE_LOOP('',(#4735,#4743,#4751,#4757,#4758,#4759)); +#4735 = ORIENTED_EDGE('',*,*,#4736,.F.); +#4736 = EDGE_CURVE('',#4737,#4660,#4739,.T.); +#4737 = VERTEX_POINT('',#4738); +#4738 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#4739 = LINE('',#4740,#4741); +#4740 = CARTESIAN_POINT('',(5.24881689775,0.270752273427,-3.27118310225) + ); +#4741 = VECTOR('',#4742,1.); +#4742 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#4743 = ORIENTED_EDGE('',*,*,#4744,.T.); +#4744 = EDGE_CURVE('',#4737,#4745,#4747,.T.); +#4745 = VERTEX_POINT('',#4746); +#4746 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#4747 = LINE('',#4748,#4749); +#4748 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#4749 = VECTOR('',#4750,1.); +#4750 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4751 = ORIENTED_EDGE('',*,*,#4752,.T.); +#4752 = EDGE_CURVE('',#4745,#4712,#4753,.T.); +#4753 = LINE('',#4754,#4755); +#4754 = CARTESIAN_POINT('',(5.155697812072,-0.150503562587, + -3.364302187928)); +#4755 = VECTOR('',#4756,1.); +#4756 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#4757 = ORIENTED_EDGE('',*,*,#4711,.T.); +#4758 = ORIENTED_EDGE('',*,*,#3980,.F.); +#4759 = ORIENTED_EDGE('',*,*,#4667,.F.); +#4760 = PLANE('',#4761); +#4761 = AXIS2_PLACEMENT_3D('',#4762,#4763,#4764); +#4762 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#4763 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#4764 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#4765 = ADVANCED_FACE('',(#4766),#4772,.F.); +#4766 = FACE_BOUND('',#4767,.F.); +#4767 = EDGE_LOOP('',(#4768,#4769,#4770,#4771)); +#4768 = ORIENTED_EDGE('',*,*,#4061,.T.); +#4769 = ORIENTED_EDGE('',*,*,#4133,.F.); +#4770 = ORIENTED_EDGE('',*,*,#4109,.F.); +#4771 = ORIENTED_EDGE('',*,*,#4094,.T.); +#4772 = PLANE('',#4773); +#4773 = AXIS2_PLACEMENT_3D('',#4774,#4775,#4776); +#4774 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#4775 = DIRECTION('',(-0.,0.,-1.)); +#4776 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4777 = ADVANCED_FACE('',(#4778),#4784,.F.); +#4778 = FACE_BOUND('',#4779,.F.); +#4779 = EDGE_LOOP('',(#4780,#4781,#4782,#4783)); +#4780 = ORIENTED_EDGE('',*,*,#4157,.T.); +#4781 = ORIENTED_EDGE('',*,*,#4229,.F.); +#4782 = ORIENTED_EDGE('',*,*,#4205,.F.); +#4783 = ORIENTED_EDGE('',*,*,#4190,.T.); +#4784 = PLANE('',#4785); +#4785 = AXIS2_PLACEMENT_3D('',#4786,#4787,#4788); +#4786 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#4787 = DIRECTION('',(-0.,0.,-1.)); +#4788 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4789 = ADVANCED_FACE('',(#4790),#4796,.F.); +#4790 = FACE_BOUND('',#4791,.F.); +#4791 = EDGE_LOOP('',(#4792,#4793,#4794,#4795)); +#4792 = ORIENTED_EDGE('',*,*,#4325,.F.); +#4793 = ORIENTED_EDGE('',*,*,#4301,.F.); +#4794 = ORIENTED_EDGE('',*,*,#4286,.T.); +#4795 = ORIENTED_EDGE('',*,*,#4253,.T.); +#4796 = PLANE('',#4797); +#4797 = AXIS2_PLACEMENT_3D('',#4798,#4799,#4800); +#4798 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#4799 = DIRECTION('',(-0.,0.,-1.)); +#4800 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#4801 = ADVANCED_FACE('',(#4802),#4813,.T.); +#4802 = FACE_BOUND('',#4803,.T.); +#4803 = EDGE_LOOP('',(#4804,#4805,#4811,#4812)); +#4804 = ORIENTED_EDGE('',*,*,#4474,.F.); +#4805 = ORIENTED_EDGE('',*,*,#4806,.T.); +#4806 = EDGE_CURVE('',#4475,#4342,#4807,.T.); +#4807 = LINE('',#4808,#4809); +#4808 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#4809 = VECTOR('',#4810,1.); +#4810 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4811 = ORIENTED_EDGE('',*,*,#4341,.T.); +#4812 = ORIENTED_EDGE('',*,*,#4397,.F.); +#4813 = PLANE('',#4814); +#4814 = AXIS2_PLACEMENT_3D('',#4815,#4816,#4817); +#4815 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#4816 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#4817 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#4818 = ADVANCED_FACE('',(#4819),#4830,.F.); +#4819 = FACE_BOUND('',#4820,.F.); +#4820 = EDGE_LOOP('',(#4821,#4822,#4823,#4829)); +#4821 = ORIENTED_EDGE('',*,*,#4806,.T.); +#4822 = ORIENTED_EDGE('',*,*,#4351,.T.); +#4823 = ORIENTED_EDGE('',*,*,#4824,.F.); +#4824 = EDGE_CURVE('',#4483,#4352,#4825,.T.); +#4825 = LINE('',#4826,#4827); +#4826 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#4827 = VECTOR('',#4828,1.); +#4828 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4829 = ORIENTED_EDGE('',*,*,#4482,.F.); +#4830 = PLANE('',#4831); +#4831 = AXIS2_PLACEMENT_3D('',#4832,#4833,#4834); +#4832 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#4833 = DIRECTION('',(0.,0.,1.)); +#4834 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4835 = ADVANCED_FACE('',(#4836),#4842,.T.); +#4836 = FACE_BOUND('',#4837,.F.); +#4837 = EDGE_LOOP('',(#4838,#4839,#4840,#4841)); +#4838 = ORIENTED_EDGE('',*,*,#4490,.F.); +#4839 = ORIENTED_EDGE('',*,*,#4824,.T.); +#4840 = ORIENTED_EDGE('',*,*,#4359,.T.); +#4841 = ORIENTED_EDGE('',*,*,#4457,.F.); +#4842 = PLANE('',#4843); +#4843 = AXIS2_PLACEMENT_3D('',#4844,#4845,#4846); +#4844 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#4845 = DIRECTION('',(-9.310387150808E-17,-0.760250805153,-0.64962967394 + )); +#4846 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#4847 = ADVANCED_FACE('',(#4848),#4854,.F.); +#4848 = FACE_BOUND('',#4849,.F.); +#4849 = EDGE_LOOP('',(#4850,#4851,#4852,#4853)); +#4850 = ORIENTED_EDGE('',*,*,#4570,.F.); +#4851 = ORIENTED_EDGE('',*,*,#4587,.T.); +#4852 = ORIENTED_EDGE('',*,*,#4515,.T.); +#4853 = ORIENTED_EDGE('',*,*,#4546,.F.); +#4854 = PLANE('',#4855); +#4855 = AXIS2_PLACEMENT_3D('',#4856,#4857,#4858); +#4856 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#4857 = DIRECTION('',(0.,0.,1.)); +#4858 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4859 = ADVANCED_FACE('',(#4860),#4871,.T.); +#4860 = FACE_BOUND('',#4861,.T.); +#4861 = EDGE_LOOP('',(#4862,#4863,#4869,#4870)); +#4862 = ORIENTED_EDGE('',*,*,#4736,.F.); +#4863 = ORIENTED_EDGE('',*,*,#4864,.T.); +#4864 = EDGE_CURVE('',#4737,#4604,#4865,.T.); +#4865 = LINE('',#4866,#4867); +#4866 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#4867 = VECTOR('',#4868,1.); +#4868 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4869 = ORIENTED_EDGE('',*,*,#4603,.T.); +#4870 = ORIENTED_EDGE('',*,*,#4659,.F.); +#4871 = PLANE('',#4872); +#4872 = AXIS2_PLACEMENT_3D('',#4873,#4874,#4875); +#4873 = CARTESIAN_POINT('',(5.32,0.235596257347,-3.301223703467)); +#4874 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#4875 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#4876 = ADVANCED_FACE('',(#4877),#4888,.F.); +#4877 = FACE_BOUND('',#4878,.F.); +#4878 = EDGE_LOOP('',(#4879,#4880,#4881,#4887)); +#4879 = ORIENTED_EDGE('',*,*,#4864,.T.); +#4880 = ORIENTED_EDGE('',*,*,#4613,.T.); +#4881 = ORIENTED_EDGE('',*,*,#4882,.F.); +#4882 = EDGE_CURVE('',#4745,#4614,#4883,.T.); +#4883 = LINE('',#4884,#4885); +#4884 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#4885 = VECTOR('',#4886,1.); +#4886 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#4887 = ORIENTED_EDGE('',*,*,#4744,.F.); +#4888 = PLANE('',#4889); +#4889 = AXIS2_PLACEMENT_3D('',#4890,#4891,#4892); +#4890 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#4891 = DIRECTION('',(0.,0.,1.)); +#4892 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#4893 = ADVANCED_FACE('',(#4894),#4900,.T.); +#4894 = FACE_BOUND('',#4895,.F.); +#4895 = EDGE_LOOP('',(#4896,#4897,#4898,#4899)); +#4896 = ORIENTED_EDGE('',*,*,#4752,.F.); +#4897 = ORIENTED_EDGE('',*,*,#4882,.T.); +#4898 = ORIENTED_EDGE('',*,*,#4621,.T.); +#4899 = ORIENTED_EDGE('',*,*,#4719,.F.); +#4900 = PLANE('',#4901); +#4901 = AXIS2_PLACEMENT_3D('',#4902,#4903,#4904); +#4902 = CARTESIAN_POINT('',(5.32,-0.204403742653,-3.301223703467)); +#4903 = DIRECTION('',(-9.310387150808E-17,-0.760250805153,-0.64962967394 + )); +#4904 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#4905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4909)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4906,#4907,#4908)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4906 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4907 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4908 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4909 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4906, + 'distance_accuracy_value','confusion accuracy'); +#4910 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4911,#4913); +#4911 = ( REPRESENTATION_RELATIONSHIP('','',#1383,#1360) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4912) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4912 = ITEM_DEFINED_TRANSFORMATION('','',#11,#1361); +#4913 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4914); +#4914 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','=>[0:1:1:5]','',#1355,#1378, + $); +#4915 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1380)); +#4916 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4917,#4919); +#4917 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4918) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4918 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23); +#4919 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4920); +#4920 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','Rigb','',#5,#523,$); +#4921 = SHAPE_DEFINITION_REPRESENTATION(#4922,#4928); +#4922 = PRODUCT_DEFINITION_SHAPE('','',#4923); +#4923 = PRODUCT_DEFINITION('design','',#4924,#4927); +#4924 = PRODUCT_DEFINITION_FORMATION('','',#4925); +#4925 = PRODUCT('D_SMA','D_SMA','',(#4926)); +#4926 = PRODUCT_CONTEXT('',#2,'mechanical'); +#4927 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#4928 = SHAPE_REPRESENTATION('',(#11,#4929),#4933); +#4929 = AXIS2_PLACEMENT_3D('',#4930,#4931,#4932); +#4930 = CARTESIAN_POINT('',(0.,0.,0.)); +#4931 = DIRECTION('',(0.,0.,1.)); +#4932 = DIRECTION('',(1.,0.,-0.)); +#4933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4937)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4934,#4935,#4936)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4934 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4935 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4936 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4937 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4934, + 'distance_accuracy_value','confusion accuracy'); +#4938 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4939,#4941); +#4939 = ( REPRESENTATION_RELATIONSHIP('','',#4928,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4940) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4940 = ITEM_DEFINED_TRANSFORMATION('','',#11,#27); +#4941 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4942); +#4942 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','Dbk','',#5,#4923,$); +#4943 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#4925)); +#4944 = SHAPE_DEFINITION_REPRESENTATION(#4945,#4951); +#4945 = PRODUCT_DEFINITION_SHAPE('','',#4946); +#4946 = PRODUCT_DEFINITION('design','',#4947,#4950); +#4947 = PRODUCT_DEFINITION_FORMATION('','',#4948); +#4948 = PRODUCT('D_SMA','D_SMA','',(#4949)); +#4949 = PRODUCT_CONTEXT('',#2,'mechanical'); +#4950 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#4951 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#4952),#6160); +#4952 = MANIFOLD_SOLID_BREP('',#4953); +#4953 = CLOSED_SHELL('',(#4954,#4994,#5077,#5102,#5177,#5194,#5211,#5228 + ,#5245,#5262,#5278,#5325,#5360,#5399,#5428,#5467,#5496,#5550,#5593, + #5616,#5639,#5662,#5713,#5736,#5753,#5827,#5851,#5918,#5930,#5942, + #5959,#5988,#6011,#6034,#6051,#6073,#6085,#6102,#6119,#6136,#6148)); +#4954 = ADVANCED_FACE('',(#4955),#4989,.T.); +#4955 = FACE_BOUND('',#4956,.T.); +#4956 = EDGE_LOOP('',(#4957,#4967,#4975,#4983)); +#4957 = ORIENTED_EDGE('',*,*,#4958,.T.); +#4958 = EDGE_CURVE('',#4959,#4961,#4963,.T.); +#4959 = VERTEX_POINT('',#4960); +#4960 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#4961 = VERTEX_POINT('',#4962); +#4962 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4963 = LINE('',#4964,#4965); +#4964 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#4965 = VECTOR('',#4966,1.); +#4966 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4967 = ORIENTED_EDGE('',*,*,#4968,.T.); +#4968 = EDGE_CURVE('',#4961,#4969,#4971,.T.); +#4969 = VERTEX_POINT('',#4970); +#4970 = CARTESIAN_POINT('',(2.353333333333,-0.75,-2.775557561563E-17)); +#4971 = LINE('',#4972,#4973); +#4972 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4973 = VECTOR('',#4974,1.); +#4974 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4975 = ORIENTED_EDGE('',*,*,#4976,.T.); +#4976 = EDGE_CURVE('',#4969,#4977,#4979,.T.); +#4977 = VERTEX_POINT('',#4978); +#4978 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4979 = LINE('',#4980,#4981); +#4980 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4981 = VECTOR('',#4982,1.); +#4982 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4983 = ORIENTED_EDGE('',*,*,#4984,.T.); +#4984 = EDGE_CURVE('',#4977,#4959,#4985,.T.); +#4985 = LINE('',#4986,#4987); +#4986 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4987 = VECTOR('',#4988,1.); +#4988 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4989 = PLANE('',#4990); +#4990 = AXIS2_PLACEMENT_3D('',#4991,#4992,#4993); +#4991 = CARTESIAN_POINT('',(1.746666666667,-5.821951347626E-16, + -7.671995716851E-18)); +#4992 = DIRECTION('',(-1.332277103521E-17,5.237186372803E-33,-1.)); +#4993 = DIRECTION('',(1.,-2.22044604925E-16,-1.332277103521E-17)); +#4994 = ADVANCED_FACE('',(#4995),#5072,.T.); +#4995 = FACE_BOUND('',#4996,.T.); +#4996 = EDGE_LOOP('',(#4997,#5007,#5014,#5015,#5023,#5031,#5041,#5049, + #5057,#5065)); +#4997 = ORIENTED_EDGE('',*,*,#4998,.F.); +#4998 = EDGE_CURVE('',#4999,#5001,#5003,.T.); +#4999 = VERTEX_POINT('',#5000); +#5000 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#5001 = VERTEX_POINT('',#5002); +#5002 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#5003 = LINE('',#5004,#5005); +#5004 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#5005 = VECTOR('',#5006,1.); +#5006 = DIRECTION('',(0.,0.,1.)); +#5007 = ORIENTED_EDGE('',*,*,#5008,.T.); +#5008 = EDGE_CURVE('',#4999,#4961,#5009,.T.); +#5009 = CIRCLE('',#5010,0.146666666667); +#5010 = AXIS2_PLACEMENT_3D('',#5011,#5012,#5013); +#5011 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#5012 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#5013 = DIRECTION('',(0.,0.,1.)); +#5014 = ORIENTED_EDGE('',*,*,#4958,.F.); +#5015 = ORIENTED_EDGE('',*,*,#5016,.T.); +#5016 = EDGE_CURVE('',#4959,#5017,#5019,.T.); +#5017 = VERTEX_POINT('',#5018); +#5018 = CARTESIAN_POINT('',(1.14,0.75,0.22)); +#5019 = LINE('',#5020,#5021); +#5020 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#5021 = VECTOR('',#5022,1.); +#5022 = DIRECTION('',(0.,0.,1.)); +#5023 = ORIENTED_EDGE('',*,*,#5024,.F.); +#5024 = EDGE_CURVE('',#5025,#5017,#5027,.T.); +#5025 = VERTEX_POINT('',#5026); +#5026 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#5027 = LINE('',#5028,#5029); +#5028 = CARTESIAN_POINT('',(2.108163247245,0.75,0.22)); +#5029 = VECTOR('',#5030,1.); +#5030 = DIRECTION('',(-1.,4.514825988711E-16,0.)); +#5031 = ORIENTED_EDGE('',*,*,#5032,.T.); +#5032 = EDGE_CURVE('',#5025,#5033,#5035,.T.); +#5033 = VERTEX_POINT('',#5034); +#5034 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#5035 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5036,#5037,#5038,#5039,#5040), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5036 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#5037 = CARTESIAN_POINT('',(2.238768685756,0.75,0.412247910026)); +#5038 = CARTESIAN_POINT('',(2.25227825666,0.75,0.604499093572)); +#5039 = CARTESIAN_POINT('',(2.265788033788,0.75,0.796753211837)); +#5040 = CARTESIAN_POINT('',(2.279297998531,0.75,0.98901)); +#5041 = ORIENTED_EDGE('',*,*,#5042,.T.); +#5042 = EDGE_CURVE('',#5033,#5043,#5045,.T.); +#5043 = VERTEX_POINT('',#5044); +#5044 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#5045 = LINE('',#5046,#5047); +#5046 = CARTESIAN_POINT('',(1.14,0.75,0.2222)); +#5047 = VECTOR('',#5048,1.); +#5048 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5049 = ORIENTED_EDGE('',*,*,#5050,.T.); +#5050 = EDGE_CURVE('',#5043,#5051,#5053,.T.); +#5051 = VERTEX_POINT('',#5052); +#5052 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#5053 = LINE('',#5054,#5055); +#5054 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#5055 = VECTOR('',#5056,1.); +#5056 = DIRECTION('',(0.,0.,1.)); +#5057 = ORIENTED_EDGE('',*,*,#5058,.T.); +#5058 = EDGE_CURVE('',#5051,#5059,#5061,.T.); +#5059 = VERTEX_POINT('',#5060); +#5060 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#5061 = LINE('',#5062,#5063); +#5062 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#5063 = VECTOR('',#5064,1.); +#5064 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5065 = ORIENTED_EDGE('',*,*,#5066,.F.); +#5066 = EDGE_CURVE('',#5001,#5059,#5067,.T.); +#5067 = CIRCLE('',#5068,0.146666666667); +#5068 = AXIS2_PLACEMENT_3D('',#5069,#5070,#5071); +#5069 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#5070 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5071 = DIRECTION('',(0.,0.,1.)); +#5072 = PLANE('',#5073); +#5073 = AXIS2_PLACEMENT_3D('',#5074,#5075,#5076); +#5074 = CARTESIAN_POINT('',(1.991067149606,0.75,0.303091083877)); +#5075 = DIRECTION('',(4.514825988711E-16,1.,5.822139933717E-17)); +#5076 = DIRECTION('',(-1.,4.514825988711E-16,-4.641550743593E-49)); +#5077 = ADVANCED_FACE('',(#5078),#5097,.T.); +#5078 = FACE_BOUND('',#5079,.T.); +#5079 = EDGE_LOOP('',(#5080,#5088,#5095,#5096)); +#5080 = ORIENTED_EDGE('',*,*,#5081,.T.); +#5081 = EDGE_CURVE('',#4999,#5082,#5084,.T.); +#5082 = VERTEX_POINT('',#5083); +#5083 = CARTESIAN_POINT('',(2.5,-0.75,0.146666666667)); +#5084 = LINE('',#5085,#5086); +#5085 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#5086 = VECTOR('',#5087,1.); +#5087 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5088 = ORIENTED_EDGE('',*,*,#5089,.T.); +#5089 = EDGE_CURVE('',#5082,#4969,#5090,.T.); +#5090 = CIRCLE('',#5091,0.146666666667); +#5091 = AXIS2_PLACEMENT_3D('',#5092,#5093,#5094); +#5092 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.146666666667)); +#5093 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#5094 = DIRECTION('',(0.,0.,1.)); +#5095 = ORIENTED_EDGE('',*,*,#4968,.F.); +#5096 = ORIENTED_EDGE('',*,*,#5008,.F.); +#5097 = CYLINDRICAL_SURFACE('',#5098,0.146666666667); +#5098 = AXIS2_PLACEMENT_3D('',#5099,#5100,#5101); +#5099 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#5100 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5101 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5102 = ADVANCED_FACE('',(#5103),#5172,.T.); +#5103 = FACE_BOUND('',#5104,.T.); +#5104 = EDGE_LOOP('',(#5105,#5106,#5114,#5123,#5131,#5139,#5147,#5157, + #5165,#5171)); +#5105 = ORIENTED_EDGE('',*,*,#5089,.F.); +#5106 = ORIENTED_EDGE('',*,*,#5107,.T.); +#5107 = EDGE_CURVE('',#5082,#5108,#5110,.T.); +#5108 = VERTEX_POINT('',#5109); +#5109 = CARTESIAN_POINT('',(2.5,-0.75,0.842343333333)); +#5110 = LINE('',#5111,#5112); +#5111 = CARTESIAN_POINT('',(2.5,-0.75,0.)); +#5112 = VECTOR('',#5113,1.); +#5113 = DIRECTION('',(0.,0.,1.)); +#5114 = ORIENTED_EDGE('',*,*,#5115,.T.); +#5115 = EDGE_CURVE('',#5108,#5116,#5118,.T.); +#5116 = VERTEX_POINT('',#5117); +#5117 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.98901)); +#5118 = CIRCLE('',#5119,0.146666666667); +#5119 = AXIS2_PLACEMENT_3D('',#5120,#5121,#5122); +#5120 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.842343333333)); +#5121 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5122 = DIRECTION('',(0.,0.,1.)); +#5123 = ORIENTED_EDGE('',*,*,#5124,.T.); +#5124 = EDGE_CURVE('',#5116,#5125,#5127,.T.); +#5125 = VERTEX_POINT('',#5126); +#5126 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#5127 = LINE('',#5128,#5129); +#5128 = CARTESIAN_POINT('',(2.5,-0.75,0.98901)); +#5129 = VECTOR('',#5130,1.); +#5130 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5131 = ORIENTED_EDGE('',*,*,#5132,.F.); +#5132 = EDGE_CURVE('',#5133,#5125,#5135,.T.); +#5133 = VERTEX_POINT('',#5134); +#5134 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#5135 = LINE('',#5136,#5137); +#5136 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#5137 = VECTOR('',#5138,1.); +#5138 = DIRECTION('',(0.,0.,1.)); +#5139 = ORIENTED_EDGE('',*,*,#5140,.T.); +#5140 = EDGE_CURVE('',#5133,#5141,#5143,.T.); +#5141 = VERTEX_POINT('',#5142); +#5142 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#5143 = LINE('',#5144,#5145); +#5144 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#5145 = VECTOR('',#5146,1.); +#5146 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5147 = ORIENTED_EDGE('',*,*,#5148,.F.); +#5148 = EDGE_CURVE('',#5149,#5141,#5151,.T.); +#5149 = VERTEX_POINT('',#5150); +#5150 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#5151 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5152,#5153,#5154,#5155,#5156), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5152 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#5153 = CARTESIAN_POINT('',(2.238768685756,-0.75,0.412247910026)); +#5154 = CARTESIAN_POINT('',(2.25227825666,-0.75,0.604499093572)); +#5155 = CARTESIAN_POINT('',(2.265788033788,-0.75,0.796753211837)); +#5156 = CARTESIAN_POINT('',(2.279297998531,-0.75,0.98901)); +#5157 = ORIENTED_EDGE('',*,*,#5158,.F.); +#5158 = EDGE_CURVE('',#5159,#5149,#5161,.T.); +#5159 = VERTEX_POINT('',#5160); +#5160 = CARTESIAN_POINT('',(1.14,-0.75,0.22)); +#5161 = LINE('',#5162,#5163); +#5162 = CARTESIAN_POINT('',(2.108163247245,-0.75,0.22)); +#5163 = VECTOR('',#5164,1.); +#5164 = DIRECTION('',(1.,-2.844998265321E-16,-0.)); +#5165 = ORIENTED_EDGE('',*,*,#5166,.F.); +#5166 = EDGE_CURVE('',#4977,#5159,#5167,.T.); +#5167 = LINE('',#5168,#5169); +#5168 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#5169 = VECTOR('',#5170,1.); +#5170 = DIRECTION('',(0.,0.,1.)); +#5171 = ORIENTED_EDGE('',*,*,#4976,.F.); +#5172 = PLANE('',#5173); +#5173 = AXIS2_PLACEMENT_3D('',#5174,#5175,#5176); +#5174 = CARTESIAN_POINT('',(1.991067149606,-0.75,0.303091083877)); +#5175 = DIRECTION('',(-2.844998265321E-16,-1.,-7.396066644327E-17)); +#5176 = DIRECTION('',(1.642256696039E-32,7.396066644327E-17,-1.)); +#5177 = ADVANCED_FACE('',(#5178),#5189,.T.); +#5178 = FACE_BOUND('',#5179,.T.); +#5179 = EDGE_LOOP('',(#5180,#5181,#5182,#5188)); +#5180 = ORIENTED_EDGE('',*,*,#4984,.F.); +#5181 = ORIENTED_EDGE('',*,*,#5166,.T.); +#5182 = ORIENTED_EDGE('',*,*,#5183,.F.); +#5183 = EDGE_CURVE('',#5017,#5159,#5184,.T.); +#5184 = LINE('',#5185,#5186); +#5185 = CARTESIAN_POINT('',(1.14,-1.022629672442,0.22)); +#5186 = VECTOR('',#5187,1.); +#5187 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5188 = ORIENTED_EDGE('',*,*,#5016,.F.); +#5189 = PLANE('',#5190); +#5190 = AXIS2_PLACEMENT_3D('',#5191,#5192,#5193); +#5191 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#5192 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5193 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5194 = ADVANCED_FACE('',(#5195),#5206,.T.); +#5195 = FACE_BOUND('',#5196,.T.); +#5196 = EDGE_LOOP('',(#5197,#5198,#5204,#5205)); +#5197 = ORIENTED_EDGE('',*,*,#4998,.T.); +#5198 = ORIENTED_EDGE('',*,*,#5199,.T.); +#5199 = EDGE_CURVE('',#5001,#5108,#5200,.T.); +#5200 = LINE('',#5201,#5202); +#5201 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#5202 = VECTOR('',#5203,1.); +#5203 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5204 = ORIENTED_EDGE('',*,*,#5107,.F.); +#5205 = ORIENTED_EDGE('',*,*,#5081,.F.); +#5206 = PLANE('',#5207); +#5207 = AXIS2_PLACEMENT_3D('',#5208,#5209,#5210); +#5208 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#5209 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5210 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5211 = ADVANCED_FACE('',(#5212),#5223,.T.); +#5212 = FACE_BOUND('',#5213,.T.); +#5213 = EDGE_LOOP('',(#5214,#5215,#5221,#5222)); +#5214 = ORIENTED_EDGE('',*,*,#5066,.T.); +#5215 = ORIENTED_EDGE('',*,*,#5216,.T.); +#5216 = EDGE_CURVE('',#5059,#5116,#5217,.T.); +#5217 = LINE('',#5218,#5219); +#5218 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#5219 = VECTOR('',#5220,1.); +#5220 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5221 = ORIENTED_EDGE('',*,*,#5115,.F.); +#5222 = ORIENTED_EDGE('',*,*,#5199,.F.); +#5223 = CYLINDRICAL_SURFACE('',#5224,0.146666666667); +#5224 = AXIS2_PLACEMENT_3D('',#5225,#5226,#5227); +#5225 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#5226 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5227 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#5228 = ADVANCED_FACE('',(#5229),#5240,.F.); +#5229 = FACE_BOUND('',#5230,.F.); +#5230 = EDGE_LOOP('',(#5231,#5232,#5233,#5234)); +#5231 = ORIENTED_EDGE('',*,*,#5058,.T.); +#5232 = ORIENTED_EDGE('',*,*,#5216,.T.); +#5233 = ORIENTED_EDGE('',*,*,#5124,.T.); +#5234 = ORIENTED_EDGE('',*,*,#5235,.T.); +#5235 = EDGE_CURVE('',#5125,#5051,#5236,.T.); +#5236 = LINE('',#5237,#5238); +#5237 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#5238 = VECTOR('',#5239,1.); +#5239 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5240 = PLANE('',#5241); +#5241 = AXIS2_PLACEMENT_3D('',#5242,#5243,#5244); +#5242 = CARTESIAN_POINT('',(2.39,-6.661338147751E-16,0.98901)); +#5243 = DIRECTION('',(0.,0.,-1.)); +#5244 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5245 = ADVANCED_FACE('',(#5246),#5257,.T.); +#5246 = FACE_BOUND('',#5247,.T.); +#5247 = EDGE_LOOP('',(#5248,#5254,#5255,#5256)); +#5248 = ORIENTED_EDGE('',*,*,#5249,.T.); +#5249 = EDGE_CURVE('',#5043,#5133,#5250,.T.); +#5250 = LINE('',#5251,#5252); +#5251 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#5252 = VECTOR('',#5253,1.); +#5253 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#5254 = ORIENTED_EDGE('',*,*,#5132,.T.); +#5255 = ORIENTED_EDGE('',*,*,#5235,.T.); +#5256 = ORIENTED_EDGE('',*,*,#5050,.F.); +#5257 = PLANE('',#5258); +#5258 = AXIS2_PLACEMENT_3D('',#5259,#5260,#5261); +#5259 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#5260 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#5261 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5262 = ADVANCED_FACE('',(#5263),#5273,.F.); +#5263 = FACE_BOUND('',#5264,.F.); +#5264 = EDGE_LOOP('',(#5265,#5270,#5271,#5272)); +#5265 = ORIENTED_EDGE('',*,*,#5266,.F.); +#5266 = EDGE_CURVE('',#5033,#5141,#5267,.T.); +#5267 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5268,#5269),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5268 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#5269 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#5270 = ORIENTED_EDGE('',*,*,#5042,.T.); +#5271 = ORIENTED_EDGE('',*,*,#5249,.T.); +#5272 = ORIENTED_EDGE('',*,*,#5140,.T.); +#5273 = PLANE('',#5274); +#5274 = AXIS2_PLACEMENT_3D('',#5275,#5276,#5277); +#5275 = CARTESIAN_POINT('',(1.71,-5.551115123126E-16,0.2222)); +#5276 = DIRECTION('',(0.,0.,-1.)); +#5277 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#5278 = ADVANCED_FACE('',(#5279),#5320,.T.); +#5279 = FACE_BOUND('',#5280,.T.); +#5280 = EDGE_LOOP('',(#5281,#5290,#5296,#5297,#5298,#5299,#5307,#5314)); +#5281 = ORIENTED_EDGE('',*,*,#5282,.F.); +#5282 = EDGE_CURVE('',#5283,#5285,#5287,.T.); +#5283 = VERTEX_POINT('',#5284); +#5284 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5285 = VERTEX_POINT('',#5286); +#5286 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5287 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5288,#5289),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5288 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5289 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5290 = ORIENTED_EDGE('',*,*,#5291,.T.); +#5291 = EDGE_CURVE('',#5283,#5149,#5292,.T.); +#5292 = LINE('',#5293,#5294); +#5293 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5294 = VECTOR('',#5295,1.); +#5295 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5296 = ORIENTED_EDGE('',*,*,#5148,.T.); +#5297 = ORIENTED_EDGE('',*,*,#5266,.F.); +#5298 = ORIENTED_EDGE('',*,*,#5032,.F.); +#5299 = ORIENTED_EDGE('',*,*,#5300,.T.); +#5300 = EDGE_CURVE('',#5025,#5301,#5303,.T.); +#5301 = VERTEX_POINT('',#5302); +#5302 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5303 = LINE('',#5304,#5305); +#5304 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5305 = VECTOR('',#5306,1.); +#5306 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5307 = ORIENTED_EDGE('',*,*,#5308,.T.); +#5308 = EDGE_CURVE('',#5301,#5309,#5311,.T.); +#5309 = VERTEX_POINT('',#5310); +#5310 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5311 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5312,#5313),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5312 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5313 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5314 = ORIENTED_EDGE('',*,*,#5315,.F.); +#5315 = EDGE_CURVE('',#5285,#5309,#5316,.T.); +#5316 = LINE('',#5317,#5318); +#5317 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5318 = VECTOR('',#5319,1.); +#5319 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5320 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5321,#5322) + ,(#5323,#5324 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5321 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5322 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5323 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5324 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5325 = ADVANCED_FACE('',(#5326),#5355,.T.); +#5326 = FACE_BOUND('',#5327,.T.); +#5327 = EDGE_LOOP('',(#5328,#5329,#5337,#5345,#5351,#5352,#5353,#5354)); +#5328 = ORIENTED_EDGE('',*,*,#5291,.F.); +#5329 = ORIENTED_EDGE('',*,*,#5330,.F.); +#5330 = EDGE_CURVE('',#5331,#5283,#5333,.T.); +#5331 = VERTEX_POINT('',#5332); +#5332 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5333 = LINE('',#5334,#5335); +#5334 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5335 = VECTOR('',#5336,1.); +#5336 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5337 = ORIENTED_EDGE('',*,*,#5338,.T.); +#5338 = EDGE_CURVE('',#5331,#5339,#5341,.T.); +#5339 = VERTEX_POINT('',#5340); +#5340 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5341 = LINE('',#5342,#5343); +#5342 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5343 = VECTOR('',#5344,1.); +#5344 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5345 = ORIENTED_EDGE('',*,*,#5346,.F.); +#5346 = EDGE_CURVE('',#5301,#5339,#5347,.T.); +#5347 = LINE('',#5348,#5349); +#5348 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5349 = VECTOR('',#5350,1.); +#5350 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5351 = ORIENTED_EDGE('',*,*,#5300,.F.); +#5352 = ORIENTED_EDGE('',*,*,#5024,.T.); +#5353 = ORIENTED_EDGE('',*,*,#5183,.T.); +#5354 = ORIENTED_EDGE('',*,*,#5158,.T.); +#5355 = PLANE('',#5356); +#5356 = AXIS2_PLACEMENT_3D('',#5357,#5358,#5359); +#5357 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5358 = DIRECTION('',(0.,0.,-1.)); +#5359 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#5360 = ADVANCED_FACE('',(#5361),#5394,.T.); +#5361 = FACE_BOUND('',#5362,.T.); +#5362 = EDGE_LOOP('',(#5363,#5373,#5379,#5380,#5381,#5389)); +#5363 = ORIENTED_EDGE('',*,*,#5364,.T.); +#5364 = EDGE_CURVE('',#5365,#5367,#5369,.T.); +#5365 = VERTEX_POINT('',#5366); +#5366 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5367 = VERTEX_POINT('',#5368); +#5368 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5369 = LINE('',#5370,#5371); +#5370 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5371 = VECTOR('',#5372,1.); +#5372 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5373 = ORIENTED_EDGE('',*,*,#5374,.T.); +#5374 = EDGE_CURVE('',#5367,#5331,#5375,.T.); +#5375 = LINE('',#5376,#5377); +#5376 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5377 = VECTOR('',#5378,1.); +#5378 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5379 = ORIENTED_EDGE('',*,*,#5330,.T.); +#5380 = ORIENTED_EDGE('',*,*,#5282,.T.); +#5381 = ORIENTED_EDGE('',*,*,#5382,.F.); +#5382 = EDGE_CURVE('',#5383,#5285,#5385,.T.); +#5383 = VERTEX_POINT('',#5384); +#5384 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5385 = LINE('',#5386,#5387); +#5386 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5387 = VECTOR('',#5388,1.); +#5388 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5389 = ORIENTED_EDGE('',*,*,#5390,.F.); +#5390 = EDGE_CURVE('',#5365,#5383,#5391,.T.); +#5391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5392,#5393),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5392 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5393 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5394 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5395,#5396) + ,(#5397,#5398 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5395 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5396 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5397 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5398 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5399 = ADVANCED_FACE('',(#5400),#5423,.T.); +#5400 = FACE_BOUND('',#5401,.T.); +#5401 = EDGE_LOOP('',(#5402,#5403,#5410,#5418)); +#5402 = ORIENTED_EDGE('',*,*,#5315,.T.); +#5403 = ORIENTED_EDGE('',*,*,#5404,.T.); +#5404 = EDGE_CURVE('',#5309,#5405,#5407,.T.); +#5405 = VERTEX_POINT('',#5406); +#5406 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5407 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5408,#5409),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5408 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5409 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5410 = ORIENTED_EDGE('',*,*,#5411,.F.); +#5411 = EDGE_CURVE('',#5412,#5405,#5414,.T.); +#5412 = VERTEX_POINT('',#5413); +#5413 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5414 = LINE('',#5415,#5416); +#5415 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5416 = VECTOR('',#5417,1.); +#5417 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5418 = ORIENTED_EDGE('',*,*,#5419,.F.); +#5419 = EDGE_CURVE('',#5285,#5412,#5420,.T.); +#5420 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5421,#5422),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5421 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5422 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5423 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5424,#5425) + ,(#5426,#5427 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5424 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5425 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5426 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5427 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5428 = ADVANCED_FACE('',(#5429),#5462,.T.); +#5429 = FACE_BOUND('',#5430,.T.); +#5430 = EDGE_LOOP('',(#5431,#5432,#5440,#5448,#5455,#5461)); +#5431 = ORIENTED_EDGE('',*,*,#5346,.T.); +#5432 = ORIENTED_EDGE('',*,*,#5433,.T.); +#5433 = EDGE_CURVE('',#5339,#5434,#5436,.T.); +#5434 = VERTEX_POINT('',#5435); +#5435 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5436 = LINE('',#5437,#5438); +#5437 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5438 = VECTOR('',#5439,1.); +#5439 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5440 = ORIENTED_EDGE('',*,*,#5441,.T.); +#5441 = EDGE_CURVE('',#5434,#5442,#5444,.T.); +#5442 = VERTEX_POINT('',#5443); +#5443 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5444 = LINE('',#5445,#5446); +#5445 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5446 = VECTOR('',#5447,1.); +#5447 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5448 = ORIENTED_EDGE('',*,*,#5449,.T.); +#5449 = EDGE_CURVE('',#5442,#5450,#5452,.T.); +#5450 = VERTEX_POINT('',#5451); +#5451 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5453,#5454),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5453 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5454 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5455 = ORIENTED_EDGE('',*,*,#5456,.F.); +#5456 = EDGE_CURVE('',#5309,#5450,#5457,.T.); +#5457 = LINE('',#5458,#5459); +#5458 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5459 = VECTOR('',#5460,1.); +#5460 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5461 = ORIENTED_EDGE('',*,*,#5308,.F.); +#5462 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5463,#5464) + ,(#5465,#5466 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5463 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#5464 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5465 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5466 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5467 = ADVANCED_FACE('',(#5468),#5491,.T.); +#5468 = FACE_BOUND('',#5469,.T.); +#5469 = EDGE_LOOP('',(#5470,#5480,#5485,#5486)); +#5470 = ORIENTED_EDGE('',*,*,#5471,.T.); +#5471 = EDGE_CURVE('',#5472,#5474,#5476,.T.); +#5472 = VERTEX_POINT('',#5473); +#5473 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5474 = VERTEX_POINT('',#5475); +#5475 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5476 = LINE('',#5477,#5478); +#5477 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5478 = VECTOR('',#5479,1.); +#5479 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5480 = ORIENTED_EDGE('',*,*,#5481,.T.); +#5481 = EDGE_CURVE('',#5474,#5339,#5482,.T.); +#5482 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5483,#5484),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5483 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5484 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5485 = ORIENTED_EDGE('',*,*,#5338,.F.); +#5486 = ORIENTED_EDGE('',*,*,#5487,.F.); +#5487 = EDGE_CURVE('',#5472,#5331,#5488,.T.); +#5488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5489,#5490),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5489 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5490 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5491 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5492,#5493) + ,(#5494,#5495 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5492 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5493 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#5494 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5495 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5496 = ADVANCED_FACE('',(#5497),#5545,.T.); +#5497 = FACE_BOUND('',#5498,.T.); +#5498 = EDGE_LOOP('',(#5499,#5500,#5506,#5507,#5515,#5523,#5531,#5539)); +#5499 = ORIENTED_EDGE('',*,*,#5441,.F.); +#5500 = ORIENTED_EDGE('',*,*,#5501,.T.); +#5501 = EDGE_CURVE('',#5434,#5367,#5502,.T.); +#5502 = LINE('',#5503,#5504); +#5503 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5504 = VECTOR('',#5505,1.); +#5505 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5506 = ORIENTED_EDGE('',*,*,#5364,.F.); +#5507 = ORIENTED_EDGE('',*,*,#5508,.F.); +#5508 = EDGE_CURVE('',#5509,#5365,#5511,.T.); +#5509 = VERTEX_POINT('',#5510); +#5510 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#5511 = LINE('',#5512,#5513); +#5512 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5513 = VECTOR('',#5514,1.); +#5514 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5515 = ORIENTED_EDGE('',*,*,#5516,.T.); +#5516 = EDGE_CURVE('',#5509,#5517,#5519,.T.); +#5517 = VERTEX_POINT('',#5518); +#5518 = CARTESIAN_POINT('',(-1.14,-0.75,0.22)); +#5519 = LINE('',#5520,#5521); +#5520 = CARTESIAN_POINT('',(0.117096097639,-0.75,0.22)); +#5521 = VECTOR('',#5522,1.); +#5522 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5523 = ORIENTED_EDGE('',*,*,#5524,.T.); +#5524 = EDGE_CURVE('',#5517,#5525,#5527,.T.); +#5525 = VERTEX_POINT('',#5526); +#5526 = CARTESIAN_POINT('',(-1.14,0.75,0.22)); +#5527 = LINE('',#5528,#5529); +#5528 = CARTESIAN_POINT('',(-1.14,-0.272629672442,0.22)); +#5529 = VECTOR('',#5530,1.); +#5530 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5531 = ORIENTED_EDGE('',*,*,#5532,.T.); +#5532 = EDGE_CURVE('',#5525,#5533,#5535,.T.); +#5533 = VERTEX_POINT('',#5534); +#5534 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#5535 = LINE('',#5536,#5537); +#5536 = CARTESIAN_POINT('',(0.117096097639,0.75,0.22)); +#5537 = VECTOR('',#5538,1.); +#5538 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5539 = ORIENTED_EDGE('',*,*,#5540,.F.); +#5540 = EDGE_CURVE('',#5442,#5533,#5541,.T.); +#5541 = LINE('',#5542,#5543); +#5542 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5543 = VECTOR('',#5544,1.); +#5544 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5545 = PLANE('',#5546); +#5546 = AXIS2_PLACEMENT_3D('',#5547,#5548,#5549); +#5547 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#5548 = DIRECTION('',(0.,0.,-1.)); +#5549 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#5550 = ADVANCED_FACE('',(#5551),#5588,.T.); +#5551 = FACE_BOUND('',#5552,.T.); +#5552 = EDGE_LOOP('',(#5553,#5554,#5555,#5565,#5572,#5580,#5581,#5582)); +#5553 = ORIENTED_EDGE('',*,*,#5449,.F.); +#5554 = ORIENTED_EDGE('',*,*,#5540,.T.); +#5555 = ORIENTED_EDGE('',*,*,#5556,.T.); +#5556 = EDGE_CURVE('',#5533,#5557,#5559,.T.); +#5557 = VERTEX_POINT('',#5558); +#5558 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#5559 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5560,#5561,#5562,#5563,#5564), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5560 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#5561 = CARTESIAN_POINT('',(-2.238768685756,0.75,0.412247910026)); +#5562 = CARTESIAN_POINT('',(-2.25227825666,0.75,0.604499093572)); +#5563 = CARTESIAN_POINT('',(-2.265788033788,0.75,0.796753211837)); +#5564 = CARTESIAN_POINT('',(-2.279297998531,0.75,0.98901)); +#5565 = ORIENTED_EDGE('',*,*,#5566,.F.); +#5566 = EDGE_CURVE('',#5567,#5557,#5569,.T.); +#5567 = VERTEX_POINT('',#5568); +#5568 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#5569 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5570,#5571),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5570 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#5571 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#5572 = ORIENTED_EDGE('',*,*,#5573,.F.); +#5573 = EDGE_CURVE('',#5509,#5567,#5574,.T.); +#5574 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5575,#5576,#5577,#5578,#5579), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5575 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#5576 = CARTESIAN_POINT('',(-2.238768685756,-0.75,0.412247910026)); +#5577 = CARTESIAN_POINT('',(-2.25227825666,-0.75,0.604499093572)); +#5578 = CARTESIAN_POINT('',(-2.265788033788,-0.75,0.796753211837)); +#5579 = CARTESIAN_POINT('',(-2.279297998531,-0.75,0.98901)); +#5580 = ORIENTED_EDGE('',*,*,#5508,.T.); +#5581 = ORIENTED_EDGE('',*,*,#5390,.T.); +#5582 = ORIENTED_EDGE('',*,*,#5583,.F.); +#5583 = EDGE_CURVE('',#5450,#5383,#5584,.T.); +#5584 = LINE('',#5585,#5586); +#5585 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5586 = VECTOR('',#5587,1.); +#5587 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5588 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5589,#5590) + ,(#5591,#5592 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5589 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#5590 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5591 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#5592 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5593 = ADVANCED_FACE('',(#5594),#5611,.T.); +#5594 = FACE_BOUND('',#5595,.T.); +#5595 = EDGE_LOOP('',(#5596,#5604,#5605,#5606)); +#5596 = ORIENTED_EDGE('',*,*,#5597,.T.); +#5597 = EDGE_CURVE('',#5598,#5472,#5600,.T.); +#5598 = VERTEX_POINT('',#5599); +#5599 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5600 = LINE('',#5601,#5602); +#5601 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5602 = VECTOR('',#5603,1.); +#5603 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5604 = ORIENTED_EDGE('',*,*,#5487,.T.); +#5605 = ORIENTED_EDGE('',*,*,#5374,.F.); +#5606 = ORIENTED_EDGE('',*,*,#5607,.F.); +#5607 = EDGE_CURVE('',#5598,#5367,#5608,.T.); +#5608 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5609,#5610),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5609 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5610 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5611 = PLANE('',#5612); +#5612 = AXIS2_PLACEMENT_3D('',#5613,#5614,#5615); +#5613 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5614 = DIRECTION('',(-2.214984063823E-16,-0.997540140447, + -7.009756199374E-02)); +#5615 = DIRECTION('',(1.,-2.22044604925E-16,-1.181399173945E-30)); +#5616 = ADVANCED_FACE('',(#5617),#5634,.T.); +#5617 = FACE_BOUND('',#5618,.T.); +#5618 = EDGE_LOOP('',(#5619,#5620,#5621,#5629)); +#5619 = ORIENTED_EDGE('',*,*,#5382,.T.); +#5620 = ORIENTED_EDGE('',*,*,#5419,.T.); +#5621 = ORIENTED_EDGE('',*,*,#5622,.F.); +#5622 = EDGE_CURVE('',#5623,#5412,#5625,.T.); +#5623 = VERTEX_POINT('',#5624); +#5624 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5625 = LINE('',#5626,#5627); +#5626 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5627 = VECTOR('',#5628,1.); +#5628 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5629 = ORIENTED_EDGE('',*,*,#5630,.F.); +#5630 = EDGE_CURVE('',#5383,#5623,#5631,.T.); +#5631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5632,#5633),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5632 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5633 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5634 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5635,#5636) + ,(#5637,#5638 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5635 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5636 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5637 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#5638 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5639 = ADVANCED_FACE('',(#5640),#5657,.T.); +#5640 = FACE_BOUND('',#5641,.T.); +#5641 = EDGE_LOOP('',(#5642,#5643,#5650,#5656)); +#5642 = ORIENTED_EDGE('',*,*,#5456,.T.); +#5643 = ORIENTED_EDGE('',*,*,#5644,.T.); +#5644 = EDGE_CURVE('',#5450,#5645,#5647,.T.); +#5645 = VERTEX_POINT('',#5646); +#5646 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5647 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5648,#5649),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5648 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5649 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5650 = ORIENTED_EDGE('',*,*,#5651,.F.); +#5651 = EDGE_CURVE('',#5405,#5645,#5652,.T.); +#5652 = LINE('',#5653,#5654); +#5653 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5654 = VECTOR('',#5655,1.); +#5655 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5656 = ORIENTED_EDGE('',*,*,#5404,.F.); +#5657 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5658,#5659) + ,(#5660,#5661 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5658 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5659 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5660 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5661 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5662 = ADVANCED_FACE('',(#5663,#5674),#5708,.F.); +#5663 = FACE_BOUND('',#5664,.F.); +#5664 = EDGE_LOOP('',(#5665,#5666,#5667,#5673)); +#5665 = ORIENTED_EDGE('',*,*,#5411,.F.); +#5666 = ORIENTED_EDGE('',*,*,#5622,.F.); +#5667 = ORIENTED_EDGE('',*,*,#5668,.F.); +#5668 = EDGE_CURVE('',#5645,#5623,#5669,.T.); +#5669 = LINE('',#5670,#5671); +#5670 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5671 = VECTOR('',#5672,1.); +#5672 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5673 = ORIENTED_EDGE('',*,*,#5651,.F.); +#5674 = FACE_BOUND('',#5675,.F.); +#5675 = EDGE_LOOP('',(#5676,#5686,#5694,#5702)); +#5676 = ORIENTED_EDGE('',*,*,#5677,.T.); +#5677 = EDGE_CURVE('',#5678,#5680,#5682,.T.); +#5678 = VERTEX_POINT('',#5679); +#5679 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5680 = VERTEX_POINT('',#5681); +#5681 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5682 = LINE('',#5683,#5684); +#5683 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5684 = VECTOR('',#5685,1.); +#5685 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5686 = ORIENTED_EDGE('',*,*,#5687,.T.); +#5687 = EDGE_CURVE('',#5680,#5688,#5690,.T.); +#5688 = VERTEX_POINT('',#5689); +#5689 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5690 = LINE('',#5691,#5692); +#5691 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5692 = VECTOR('',#5693,1.); +#5693 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5694 = ORIENTED_EDGE('',*,*,#5695,.T.); +#5695 = EDGE_CURVE('',#5688,#5696,#5698,.T.); +#5696 = VERTEX_POINT('',#5697); +#5697 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5698 = LINE('',#5699,#5700); +#5699 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5700 = VECTOR('',#5701,1.); +#5701 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5702 = ORIENTED_EDGE('',*,*,#5703,.T.); +#5703 = EDGE_CURVE('',#5696,#5678,#5704,.T.); +#5704 = LINE('',#5705,#5706); +#5705 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5706 = VECTOR('',#5707,1.); +#5707 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5708 = PLANE('',#5709); +#5709 = AXIS2_PLACEMENT_3D('',#5710,#5711,#5712); +#5710 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5711 = DIRECTION('',(0.,0.,-1.)); +#5712 = DIRECTION('',(-0.866473406918,0.499223231735,0.)); +#5713 = ADVANCED_FACE('',(#5714),#5731,.T.); +#5714 = FACE_BOUND('',#5715,.T.); +#5715 = EDGE_LOOP('',(#5716,#5724,#5729,#5730)); +#5716 = ORIENTED_EDGE('',*,*,#5717,.T.); +#5717 = EDGE_CURVE('',#5474,#5718,#5720,.T.); +#5718 = VERTEX_POINT('',#5719); +#5719 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5720 = LINE('',#5721,#5722); +#5721 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5722 = VECTOR('',#5723,1.); +#5723 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5724 = ORIENTED_EDGE('',*,*,#5725,.T.); +#5725 = EDGE_CURVE('',#5718,#5434,#5726,.T.); +#5726 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5727,#5728),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5727 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5728 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5729 = ORIENTED_EDGE('',*,*,#5433,.F.); +#5730 = ORIENTED_EDGE('',*,*,#5481,.F.); +#5731 = PLANE('',#5732); +#5732 = AXIS2_PLACEMENT_3D('',#5733,#5734,#5735); +#5733 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5734 = DIRECTION('',(2.214984063823E-16,0.997540140447, + -7.009756199374E-02)); +#5735 = DIRECTION('',(-1.,2.22044604925E-16,-1.181399173945E-30)); +#5736 = ADVANCED_FACE('',(#5737),#5748,.T.); +#5737 = FACE_BOUND('',#5738,.F.); +#5738 = EDGE_LOOP('',(#5739,#5740,#5741,#5747)); +#5739 = ORIENTED_EDGE('',*,*,#5471,.T.); +#5740 = ORIENTED_EDGE('',*,*,#5717,.T.); +#5741 = ORIENTED_EDGE('',*,*,#5742,.T.); +#5742 = EDGE_CURVE('',#5718,#5598,#5743,.T.); +#5743 = LINE('',#5744,#5745); +#5744 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5745 = VECTOR('',#5746,1.); +#5746 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5747 = ORIENTED_EDGE('',*,*,#5597,.T.); +#5748 = PLANE('',#5749); +#5749 = AXIS2_PLACEMENT_3D('',#5750,#5751,#5752); +#5750 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5751 = DIRECTION('',(0.,0.,-1.)); +#5752 = DIRECTION('',(-0.651825367196,0.758369099238,0.)); +#5753 = ADVANCED_FACE('',(#5754),#5822,.T.); +#5754 = FACE_BOUND('',#5755,.T.); +#5755 = EDGE_LOOP('',(#5756,#5767,#5775,#5784,#5792,#5800,#5806,#5807, + #5808,#5816)); +#5756 = ORIENTED_EDGE('',*,*,#5757,.F.); +#5757 = EDGE_CURVE('',#5758,#5760,#5762,.T.); +#5758 = VERTEX_POINT('',#5759); +#5759 = CARTESIAN_POINT('',(-2.5,0.75,0.146666666667)); +#5760 = VERTEX_POINT('',#5761); +#5761 = CARTESIAN_POINT('',(-2.353333333333,0.75,-2.775557561563E-17)); +#5762 = CIRCLE('',#5763,0.146666666667); +#5763 = AXIS2_PLACEMENT_3D('',#5764,#5765,#5766); +#5764 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.146666666667)); +#5765 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5766 = DIRECTION('',(0.,0.,1.)); +#5767 = ORIENTED_EDGE('',*,*,#5768,.T.); +#5768 = EDGE_CURVE('',#5758,#5769,#5771,.T.); +#5769 = VERTEX_POINT('',#5770); +#5770 = CARTESIAN_POINT('',(-2.5,0.75,0.842343333333)); +#5771 = LINE('',#5772,#5773); +#5772 = CARTESIAN_POINT('',(-2.5,0.75,0.)); +#5773 = VECTOR('',#5774,1.); +#5774 = DIRECTION('',(0.,0.,1.)); +#5775 = ORIENTED_EDGE('',*,*,#5776,.T.); +#5776 = EDGE_CURVE('',#5769,#5777,#5779,.T.); +#5777 = VERTEX_POINT('',#5778); +#5778 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.98901)); +#5779 = CIRCLE('',#5780,0.146666666667); +#5780 = AXIS2_PLACEMENT_3D('',#5781,#5782,#5783); +#5781 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.842343333333)); +#5782 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5783 = DIRECTION('',(0.,0.,1.)); +#5784 = ORIENTED_EDGE('',*,*,#5785,.T.); +#5785 = EDGE_CURVE('',#5777,#5786,#5788,.T.); +#5786 = VERTEX_POINT('',#5787); +#5787 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#5788 = LINE('',#5789,#5790); +#5789 = CARTESIAN_POINT('',(-2.5,0.75,0.98901)); +#5790 = VECTOR('',#5791,1.); +#5791 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5792 = ORIENTED_EDGE('',*,*,#5793,.F.); +#5793 = EDGE_CURVE('',#5794,#5786,#5796,.T.); +#5794 = VERTEX_POINT('',#5795); +#5795 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5796 = LINE('',#5797,#5798); +#5797 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5798 = VECTOR('',#5799,1.); +#5799 = DIRECTION('',(0.,0.,1.)); +#5800 = ORIENTED_EDGE('',*,*,#5801,.T.); +#5801 = EDGE_CURVE('',#5794,#5557,#5802,.T.); +#5802 = LINE('',#5803,#5804); +#5803 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5804 = VECTOR('',#5805,1.); +#5805 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5806 = ORIENTED_EDGE('',*,*,#5556,.F.); +#5807 = ORIENTED_EDGE('',*,*,#5532,.F.); +#5808 = ORIENTED_EDGE('',*,*,#5809,.F.); +#5809 = EDGE_CURVE('',#5810,#5525,#5812,.T.); +#5810 = VERTEX_POINT('',#5811); +#5811 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5812 = LINE('',#5813,#5814); +#5813 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5814 = VECTOR('',#5815,1.); +#5815 = DIRECTION('',(0.,0.,1.)); +#5816 = ORIENTED_EDGE('',*,*,#5817,.F.); +#5817 = EDGE_CURVE('',#5760,#5810,#5818,.T.); +#5818 = LINE('',#5819,#5820); +#5819 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5820 = VECTOR('',#5821,1.); +#5821 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5822 = PLANE('',#5823); +#5823 = AXIS2_PLACEMENT_3D('',#5824,#5825,#5826); +#5824 = CARTESIAN_POINT('',(-1.991067149606,0.75,0.303091083877)); +#5825 = DIRECTION('',(2.22044604925E-16,1.,-7.960022943413E-32)); +#5826 = DIRECTION('',(-1.,2.22044604925E-16,4.804138236971E-64)); +#5827 = ADVANCED_FACE('',(#5828),#5846,.T.); +#5828 = FACE_BOUND('',#5829,.T.); +#5829 = EDGE_LOOP('',(#5830,#5838,#5839,#5840)); +#5830 = ORIENTED_EDGE('',*,*,#5831,.F.); +#5831 = EDGE_CURVE('',#5810,#5832,#5834,.T.); +#5832 = VERTEX_POINT('',#5833); +#5833 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5834 = LINE('',#5835,#5836); +#5835 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5836 = VECTOR('',#5837,1.); +#5837 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5838 = ORIENTED_EDGE('',*,*,#5809,.T.); +#5839 = ORIENTED_EDGE('',*,*,#5524,.F.); +#5840 = ORIENTED_EDGE('',*,*,#5841,.F.); +#5841 = EDGE_CURVE('',#5832,#5517,#5842,.T.); +#5842 = LINE('',#5843,#5844); +#5843 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5844 = VECTOR('',#5845,1.); +#5845 = DIRECTION('',(0.,0.,1.)); +#5846 = PLANE('',#5847); +#5847 = AXIS2_PLACEMENT_3D('',#5848,#5849,#5850); +#5848 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5849 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5850 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5851 = ADVANCED_FACE('',(#5852),#5913,.T.); +#5852 = FACE_BOUND('',#5853,.T.); +#5853 = EDGE_LOOP('',(#5854,#5864,#5873,#5879,#5880,#5881,#5882,#5890, + #5898,#5906)); +#5854 = ORIENTED_EDGE('',*,*,#5855,.F.); +#5855 = EDGE_CURVE('',#5856,#5858,#5860,.T.); +#5856 = VERTEX_POINT('',#5857); +#5857 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#5858 = VERTEX_POINT('',#5859); +#5859 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#5860 = LINE('',#5861,#5862); +#5861 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#5862 = VECTOR('',#5863,1.); +#5863 = DIRECTION('',(0.,0.,1.)); +#5864 = ORIENTED_EDGE('',*,*,#5865,.T.); +#5865 = EDGE_CURVE('',#5856,#5866,#5868,.T.); +#5866 = VERTEX_POINT('',#5867); +#5867 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#5868 = CIRCLE('',#5869,0.146666666667); +#5869 = AXIS2_PLACEMENT_3D('',#5870,#5871,#5872); +#5870 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#5871 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5872 = DIRECTION('',(0.,0.,1.)); +#5873 = ORIENTED_EDGE('',*,*,#5874,.F.); +#5874 = EDGE_CURVE('',#5832,#5866,#5875,.T.); +#5875 = LINE('',#5876,#5877); +#5876 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5877 = VECTOR('',#5878,1.); +#5878 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5879 = ORIENTED_EDGE('',*,*,#5841,.T.); +#5880 = ORIENTED_EDGE('',*,*,#5516,.F.); +#5881 = ORIENTED_EDGE('',*,*,#5573,.T.); +#5882 = ORIENTED_EDGE('',*,*,#5883,.T.); +#5883 = EDGE_CURVE('',#5567,#5884,#5886,.T.); +#5884 = VERTEX_POINT('',#5885); +#5885 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5886 = LINE('',#5887,#5888); +#5887 = CARTESIAN_POINT('',(-1.14,-0.75,0.2222)); +#5888 = VECTOR('',#5889,1.); +#5889 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5890 = ORIENTED_EDGE('',*,*,#5891,.T.); +#5891 = EDGE_CURVE('',#5884,#5892,#5894,.T.); +#5892 = VERTEX_POINT('',#5893); +#5893 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5894 = LINE('',#5895,#5896); +#5895 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5896 = VECTOR('',#5897,1.); +#5897 = DIRECTION('',(0.,0.,1.)); +#5898 = ORIENTED_EDGE('',*,*,#5899,.T.); +#5899 = EDGE_CURVE('',#5892,#5900,#5902,.T.); +#5900 = VERTEX_POINT('',#5901); +#5901 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#5902 = LINE('',#5903,#5904); +#5903 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5904 = VECTOR('',#5905,1.); +#5905 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5906 = ORIENTED_EDGE('',*,*,#5907,.F.); +#5907 = EDGE_CURVE('',#5858,#5900,#5908,.T.); +#5908 = CIRCLE('',#5909,0.146666666667); +#5909 = AXIS2_PLACEMENT_3D('',#5910,#5911,#5912); +#5910 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#5911 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5912 = DIRECTION('',(0.,0.,1.)); +#5913 = PLANE('',#5914); +#5914 = AXIS2_PLACEMENT_3D('',#5915,#5916,#5917); +#5915 = CARTESIAN_POINT('',(-1.991067149606,-0.75,0.303091083877)); +#5916 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#5917 = DIRECTION('',(0.,0.,-1.)); +#5918 = ADVANCED_FACE('',(#5919),#5925,.T.); +#5919 = FACE_BOUND('',#5920,.T.); +#5920 = EDGE_LOOP('',(#5921,#5922,#5923,#5924)); +#5921 = ORIENTED_EDGE('',*,*,#5742,.T.); +#5922 = ORIENTED_EDGE('',*,*,#5607,.T.); +#5923 = ORIENTED_EDGE('',*,*,#5501,.F.); +#5924 = ORIENTED_EDGE('',*,*,#5725,.F.); +#5925 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5926,#5927) + ,(#5928,#5929 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5926 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5927 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5928 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5929 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5930 = ADVANCED_FACE('',(#5931),#5937,.T.); +#5931 = FACE_BOUND('',#5932,.T.); +#5932 = EDGE_LOOP('',(#5933,#5934,#5935,#5936)); +#5933 = ORIENTED_EDGE('',*,*,#5583,.T.); +#5934 = ORIENTED_EDGE('',*,*,#5630,.T.); +#5935 = ORIENTED_EDGE('',*,*,#5668,.F.); +#5936 = ORIENTED_EDGE('',*,*,#5644,.F.); +#5937 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5938,#5939) + ,(#5940,#5941 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5938 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5939 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5940 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5941 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5942 = ADVANCED_FACE('',(#5943),#5954,.F.); +#5943 = FACE_BOUND('',#5944,.F.); +#5944 = EDGE_LOOP('',(#5945,#5946,#5947,#5953)); +#5945 = ORIENTED_EDGE('',*,*,#5566,.F.); +#5946 = ORIENTED_EDGE('',*,*,#5883,.T.); +#5947 = ORIENTED_EDGE('',*,*,#5948,.T.); +#5948 = EDGE_CURVE('',#5884,#5794,#5949,.T.); +#5949 = LINE('',#5950,#5951); +#5950 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5951 = VECTOR('',#5952,1.); +#5952 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5953 = ORIENTED_EDGE('',*,*,#5801,.T.); +#5954 = PLANE('',#5955); +#5955 = AXIS2_PLACEMENT_3D('',#5956,#5957,#5958); +#5956 = CARTESIAN_POINT('',(-1.71,4.440892098501E-16,0.2222)); +#5957 = DIRECTION('',(0.,-0.,-1.)); +#5958 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5959 = ADVANCED_FACE('',(#5960),#5983,.F.); +#5960 = FACE_BOUND('',#5961,.F.); +#5961 = EDGE_LOOP('',(#5962,#5972,#5977,#5978)); +#5962 = ORIENTED_EDGE('',*,*,#5963,.T.); +#5963 = EDGE_CURVE('',#5964,#5966,#5968,.T.); +#5964 = VERTEX_POINT('',#5965); +#5965 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5966 = VERTEX_POINT('',#5967); +#5967 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5968 = LINE('',#5969,#5970); +#5969 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5970 = VECTOR('',#5971,1.); +#5971 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5972 = ORIENTED_EDGE('',*,*,#5973,.T.); +#5973 = EDGE_CURVE('',#5966,#5680,#5974,.T.); +#5974 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5975,#5976),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5975 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5976 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5977 = ORIENTED_EDGE('',*,*,#5677,.F.); +#5978 = ORIENTED_EDGE('',*,*,#5979,.F.); +#5979 = EDGE_CURVE('',#5964,#5678,#5980,.T.); +#5980 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5981,#5982),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5981 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5982 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5983 = PLANE('',#5984); +#5984 = AXIS2_PLACEMENT_3D('',#5985,#5986,#5987); +#5985 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5986 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5987 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5988 = ADVANCED_FACE('',(#5989),#6006,.F.); +#5989 = FACE_BOUND('',#5990,.F.); +#5990 = EDGE_LOOP('',(#5991,#5999,#6000,#6001)); +#5991 = ORIENTED_EDGE('',*,*,#5992,.T.); +#5992 = EDGE_CURVE('',#5993,#5964,#5995,.T.); +#5993 = VERTEX_POINT('',#5994); +#5994 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5995 = LINE('',#5996,#5997); +#5996 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5997 = VECTOR('',#5998,1.); +#5998 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5999 = ORIENTED_EDGE('',*,*,#5979,.T.); +#6000 = ORIENTED_EDGE('',*,*,#5703,.F.); +#6001 = ORIENTED_EDGE('',*,*,#6002,.F.); +#6002 = EDGE_CURVE('',#5993,#5696,#6003,.T.); +#6003 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6004,#6005),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6004 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#6005 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#6006 = PLANE('',#6007); +#6007 = AXIS2_PLACEMENT_3D('',#6008,#6009,#6010); +#6008 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#6009 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6010 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6011 = ADVANCED_FACE('',(#6012),#6029,.F.); +#6012 = FACE_BOUND('',#6013,.F.); +#6013 = EDGE_LOOP('',(#6014,#6022,#6023,#6024)); +#6014 = ORIENTED_EDGE('',*,*,#6015,.T.); +#6015 = EDGE_CURVE('',#6016,#5993,#6018,.T.); +#6016 = VERTEX_POINT('',#6017); +#6017 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#6018 = LINE('',#6019,#6020); +#6019 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#6020 = VECTOR('',#6021,1.); +#6021 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6022 = ORIENTED_EDGE('',*,*,#6002,.T.); +#6023 = ORIENTED_EDGE('',*,*,#5695,.F.); +#6024 = ORIENTED_EDGE('',*,*,#6025,.F.); +#6025 = EDGE_CURVE('',#6016,#5688,#6026,.T.); +#6026 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6027,#6028),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6027 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#6028 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#6029 = PLANE('',#6030); +#6030 = AXIS2_PLACEMENT_3D('',#6031,#6032,#6033); +#6031 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#6032 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6033 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6034 = ADVANCED_FACE('',(#6035),#6046,.F.); +#6035 = FACE_BOUND('',#6036,.F.); +#6036 = EDGE_LOOP('',(#6037,#6043,#6044,#6045)); +#6037 = ORIENTED_EDGE('',*,*,#6038,.T.); +#6038 = EDGE_CURVE('',#5966,#6016,#6039,.T.); +#6039 = LINE('',#6040,#6041); +#6040 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#6041 = VECTOR('',#6042,1.); +#6042 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6043 = ORIENTED_EDGE('',*,*,#6025,.T.); +#6044 = ORIENTED_EDGE('',*,*,#5687,.F.); +#6045 = ORIENTED_EDGE('',*,*,#5973,.F.); +#6046 = PLANE('',#6047); +#6047 = AXIS2_PLACEMENT_3D('',#6048,#6049,#6050); +#6048 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#6049 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6050 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6051 = ADVANCED_FACE('',(#6052),#6068,.T.); +#6052 = FACE_BOUND('',#6053,.T.); +#6053 = EDGE_LOOP('',(#6054,#6060,#6061,#6067)); +#6054 = ORIENTED_EDGE('',*,*,#6055,.T.); +#6055 = EDGE_CURVE('',#5856,#5758,#6056,.T.); +#6056 = LINE('',#6057,#6058); +#6057 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#6058 = VECTOR('',#6059,1.); +#6059 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6060 = ORIENTED_EDGE('',*,*,#5757,.T.); +#6061 = ORIENTED_EDGE('',*,*,#6062,.F.); +#6062 = EDGE_CURVE('',#5866,#5760,#6063,.T.); +#6063 = LINE('',#6064,#6065); +#6064 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#6065 = VECTOR('',#6066,1.); +#6066 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6067 = ORIENTED_EDGE('',*,*,#5865,.F.); +#6068 = CYLINDRICAL_SURFACE('',#6069,0.146666666667); +#6069 = AXIS2_PLACEMENT_3D('',#6070,#6071,#6072); +#6070 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#6071 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6072 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6073 = ADVANCED_FACE('',(#6074),#6080,.T.); +#6074 = FACE_BOUND('',#6075,.T.); +#6075 = EDGE_LOOP('',(#6076,#6077,#6078,#6079)); +#6076 = ORIENTED_EDGE('',*,*,#5874,.T.); +#6077 = ORIENTED_EDGE('',*,*,#6062,.T.); +#6078 = ORIENTED_EDGE('',*,*,#5817,.T.); +#6079 = ORIENTED_EDGE('',*,*,#5831,.T.); +#6080 = PLANE('',#6081); +#6081 = AXIS2_PLACEMENT_3D('',#6082,#6083,#6084); +#6082 = CARTESIAN_POINT('',(-1.746666666667,3.878379099357E-16, + -7.671995716851E-18)); +#6083 = DIRECTION('',(1.332277103521E-17,-2.579688262589E-33,-1.)); +#6084 = DIRECTION('',(1.,-2.22044604925E-16,1.332277103521E-17)); +#6085 = ADVANCED_FACE('',(#6086),#6097,.T.); +#6086 = FACE_BOUND('',#6087,.T.); +#6087 = EDGE_LOOP('',(#6088,#6089,#6090,#6096)); +#6088 = ORIENTED_EDGE('',*,*,#5948,.T.); +#6089 = ORIENTED_EDGE('',*,*,#5793,.T.); +#6090 = ORIENTED_EDGE('',*,*,#6091,.T.); +#6091 = EDGE_CURVE('',#5786,#5892,#6092,.T.); +#6092 = LINE('',#6093,#6094); +#6093 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#6094 = VECTOR('',#6095,1.); +#6095 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6096 = ORIENTED_EDGE('',*,*,#5891,.F.); +#6097 = PLANE('',#6098); +#6098 = AXIS2_PLACEMENT_3D('',#6099,#6100,#6101); +#6099 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#6100 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6101 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6102 = ADVANCED_FACE('',(#6103),#6114,.F.); +#6103 = FACE_BOUND('',#6104,.F.); +#6104 = EDGE_LOOP('',(#6105,#6106,#6112,#6113)); +#6105 = ORIENTED_EDGE('',*,*,#5899,.T.); +#6106 = ORIENTED_EDGE('',*,*,#6107,.T.); +#6107 = EDGE_CURVE('',#5900,#5777,#6108,.T.); +#6108 = LINE('',#6109,#6110); +#6109 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#6110 = VECTOR('',#6111,1.); +#6111 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6112 = ORIENTED_EDGE('',*,*,#5785,.T.); +#6113 = ORIENTED_EDGE('',*,*,#6091,.T.); +#6114 = PLANE('',#6115); +#6115 = AXIS2_PLACEMENT_3D('',#6116,#6117,#6118); +#6116 = CARTESIAN_POINT('',(-2.39,4.440892098501E-16,0.98901)); +#6117 = DIRECTION('',(0.,-0.,-1.)); +#6118 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6119 = ADVANCED_FACE('',(#6120),#6131,.T.); +#6120 = FACE_BOUND('',#6121,.T.); +#6121 = EDGE_LOOP('',(#6122,#6123,#6124,#6125)); +#6122 = ORIENTED_EDGE('',*,*,#5907,.T.); +#6123 = ORIENTED_EDGE('',*,*,#6107,.T.); +#6124 = ORIENTED_EDGE('',*,*,#5776,.F.); +#6125 = ORIENTED_EDGE('',*,*,#6126,.F.); +#6126 = EDGE_CURVE('',#5858,#5769,#6127,.T.); +#6127 = LINE('',#6128,#6129); +#6128 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#6129 = VECTOR('',#6130,1.); +#6130 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6131 = CYLINDRICAL_SURFACE('',#6132,0.146666666667); +#6132 = AXIS2_PLACEMENT_3D('',#6133,#6134,#6135); +#6133 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#6134 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6135 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6136 = ADVANCED_FACE('',(#6137),#6143,.T.); +#6137 = FACE_BOUND('',#6138,.T.); +#6138 = EDGE_LOOP('',(#6139,#6140,#6141,#6142)); +#6139 = ORIENTED_EDGE('',*,*,#5855,.T.); +#6140 = ORIENTED_EDGE('',*,*,#6126,.T.); +#6141 = ORIENTED_EDGE('',*,*,#5768,.F.); +#6142 = ORIENTED_EDGE('',*,*,#6055,.F.); +#6143 = PLANE('',#6144); +#6144 = AXIS2_PLACEMENT_3D('',#6145,#6146,#6147); +#6145 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#6146 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6147 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6148 = ADVANCED_FACE('',(#6149),#6155,.F.); +#6149 = FACE_BOUND('',#6150,.T.); +#6150 = EDGE_LOOP('',(#6151,#6152,#6153,#6154)); +#6151 = ORIENTED_EDGE('',*,*,#5992,.T.); +#6152 = ORIENTED_EDGE('',*,*,#5963,.T.); +#6153 = ORIENTED_EDGE('',*,*,#6038,.T.); +#6154 = ORIENTED_EDGE('',*,*,#6015,.T.); +#6155 = PLANE('',#6156); +#6156 = AXIS2_PLACEMENT_3D('',#6157,#6158,#6159); +#6157 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#6158 = DIRECTION('',(0.,0.,-1.)); +#6159 = DIRECTION('',(-0.246713052972,0.969088576701,0.)); +#6160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6164)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#6161,#6162,#6163)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#6161 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#6162 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#6163 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#6164 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6161, + 'distance_accuracy_value','confusion accuracy'); +#6165 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#6166,#6168); +#6166 = ( REPRESENTATION_RELATIONSHIP('','',#4951,#4928) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#6167) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#6167 = ITEM_DEFINED_TRANSFORMATION('','',#11,#4929); +#6168 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #6169); +#6169 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','=>[0:1:1:7]','',#4923,#4946, + $); +#6170 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#4948)); +#6171 = SHAPE_DEFINITION_REPRESENTATION(#6172,#6178); +#6172 = PRODUCT_DEFINITION_SHAPE('','',#6173); +#6173 = PRODUCT_DEFINITION('design','',#6174,#6177); +#6174 = PRODUCT_DEFINITION_FORMATION('','',#6175); +#6175 = PRODUCT('JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', + 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical','',(#6176)); +#6176 = PRODUCT_CONTEXT('',#2,'mechanical'); +#6177 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#6178 = SHAPE_REPRESENTATION('',(#11,#6179),#6183); +#6179 = AXIS2_PLACEMENT_3D('',#6180,#6181,#6182); +#6180 = CARTESIAN_POINT('',(0.,0.,0.)); +#6181 = DIRECTION('',(0.,0.,1.)); +#6182 = DIRECTION('',(1.,0.,-0.)); +#6183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6187)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#6184,#6185,#6186)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#6184 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#6185 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#6186 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#6187 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6184, + 'distance_accuracy_value','confusion accuracy'); +#6188 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#6189,#6191); +#6189 = ( REPRESENTATION_RELATIONSHIP('','',#6178,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#6190) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#6190 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31); +#6191 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #6192); +#6192 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','P6','',#5,#6173,$); +#6193 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#6175)); +#6194 = SHAPE_DEFINITION_REPRESENTATION(#6195,#6201); +#6195 = PRODUCT_DEFINITION_SHAPE('','',#6196); +#6196 = PRODUCT_DEFINITION('design','',#6197,#6200); +#6197 = PRODUCT_DEFINITION_FORMATION('','',#6198); +#6198 = PRODUCT('JST_B4B_XH_A','JST_B4B_XH_A','',(#6199)); +#6199 = PRODUCT_CONTEXT('',#2,'mechanical'); +#6200 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#6201 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#6202),#10397); +#6202 = MANIFOLD_SOLID_BREP('',#6203); +#6203 = CLOSED_SHELL('',(#6204,#6276,#6315,#6339,#6404,#6428,#6580,#6604 + ,#6669,#6694,#6743,#6760,#6784,#6801,#6971,#6995,#7261,#7285,#7318, + #7342,#7373,#7390,#7423,#7447,#7478,#7495,#7528,#7552,#7583,#7600, + #7633,#7657,#7688,#7700,#7733,#7750,#7767,#7779,#7927,#7944,#7961, + #7978,#7995,#8012,#8029,#8046,#8063,#8080,#8097,#8114,#8131,#8148, + #8165,#8177,#8194,#8211,#8228,#8245,#8291,#8337,#8383,#8429,#8460, + #8484,#8508,#8525,#8556,#8580,#8604,#8621,#8652,#8676,#8700,#8717, + #8748,#8772,#8796,#8813,#8876,#8900,#8956,#8973,#9004,#9028,#9052, + #9069,#9100,#9124,#9148,#9165,#9196,#9252,#9276,#9325,#9356,#9380, + #9404,#9421,#9452,#9476,#9500,#9517,#9548,#9572,#9596,#9613,#9644, + #9668,#9692,#9709,#9756,#9787,#9799,#9816,#9842,#9875,#9906,#9930, + #9954,#9971,#10002,#10026,#10050,#10067,#10084,#10131,#10157,#10174, + #10200,#10233,#10245,#10257,#10269,#10281,#10298,#10315,#10327, + #10339,#10351,#10368,#10385)); +#6204 = ADVANCED_FACE('',(#6205),#6271,.T.); +#6205 = FACE_BOUND('',#6206,.T.); +#6206 = EDGE_LOOP('',(#6207,#6217,#6225,#6233,#6241,#6249,#6257,#6265)); +#6207 = ORIENTED_EDGE('',*,*,#6208,.T.); +#6208 = EDGE_CURVE('',#6209,#6211,#6213,.T.); +#6209 = VERTEX_POINT('',#6210); +#6210 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#6211 = VERTEX_POINT('',#6212); +#6212 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#6213 = LINE('',#6214,#6215); +#6214 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#6215 = VECTOR('',#6216,1.); +#6216 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6217 = ORIENTED_EDGE('',*,*,#6218,.T.); +#6218 = EDGE_CURVE('',#6211,#6219,#6221,.T.); +#6219 = VERTEX_POINT('',#6220); +#6220 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#6221 = LINE('',#6222,#6223); +#6222 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#6223 = VECTOR('',#6224,1.); +#6224 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6225 = ORIENTED_EDGE('',*,*,#6226,.T.); +#6226 = EDGE_CURVE('',#6219,#6227,#6229,.T.); +#6227 = VERTEX_POINT('',#6228); +#6228 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#6229 = LINE('',#6230,#6231); +#6230 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#6231 = VECTOR('',#6232,1.); +#6232 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6233 = ORIENTED_EDGE('',*,*,#6234,.T.); +#6234 = EDGE_CURVE('',#6227,#6235,#6237,.T.); +#6235 = VERTEX_POINT('',#6236); +#6236 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#6237 = LINE('',#6238,#6239); +#6238 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#6239 = VECTOR('',#6240,1.); +#6240 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6241 = ORIENTED_EDGE('',*,*,#6242,.T.); +#6242 = EDGE_CURVE('',#6235,#6243,#6245,.T.); +#6243 = VERTEX_POINT('',#6244); +#6244 = CARTESIAN_POINT('',(9.3,0.5,7.)); +#6245 = LINE('',#6246,#6247); +#6246 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#6247 = VECTOR('',#6248,1.); +#6248 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6249 = ORIENTED_EDGE('',*,*,#6250,.F.); +#6250 = EDGE_CURVE('',#6251,#6243,#6253,.T.); +#6251 = VERTEX_POINT('',#6252); +#6252 = CARTESIAN_POINT('',(9.3,-2.85,7.)); +#6253 = LINE('',#6254,#6255); +#6254 = CARTESIAN_POINT('',(9.3,-2.65,7.)); +#6255 = VECTOR('',#6256,1.); +#6256 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6257 = ORIENTED_EDGE('',*,*,#6258,.F.); +#6258 = EDGE_CURVE('',#6259,#6251,#6261,.T.); +#6259 = VERTEX_POINT('',#6260); +#6260 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#6261 = LINE('',#6262,#6263); +#6262 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#6263 = VECTOR('',#6264,1.); +#6264 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6265 = ORIENTED_EDGE('',*,*,#6266,.F.); +#6266 = EDGE_CURVE('',#6209,#6259,#6267,.T.); +#6267 = LINE('',#6268,#6269); +#6268 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#6269 = VECTOR('',#6270,1.); +#6270 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6271 = PLANE('',#6272); +#6272 = AXIS2_PLACEMENT_3D('',#6273,#6274,#6275); +#6273 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#6274 = DIRECTION('',(0.,0.,1.)); +#6275 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6276 = ADVANCED_FACE('',(#6277),#6310,.T.); +#6277 = FACE_BOUND('',#6278,.T.); +#6278 = EDGE_LOOP('',(#6279,#6289,#6297,#6303,#6304)); +#6279 = ORIENTED_EDGE('',*,*,#6280,.T.); +#6280 = EDGE_CURVE('',#6281,#6283,#6285,.T.); +#6281 = VERTEX_POINT('',#6282); +#6282 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#6283 = VERTEX_POINT('',#6284); +#6284 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#6285 = LINE('',#6286,#6287); +#6286 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#6287 = VECTOR('',#6288,1.); +#6288 = DIRECTION('',(-0.,0.,-1.)); +#6289 = ORIENTED_EDGE('',*,*,#6290,.T.); +#6290 = EDGE_CURVE('',#6283,#6291,#6293,.T.); +#6291 = VERTEX_POINT('',#6292); +#6292 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#6293 = LINE('',#6294,#6295); +#6294 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6295 = VECTOR('',#6296,1.); +#6296 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6297 = ORIENTED_EDGE('',*,*,#6298,.T.); +#6298 = EDGE_CURVE('',#6291,#6211,#6299,.T.); +#6299 = LINE('',#6300,#6301); +#6300 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#6301 = VECTOR('',#6302,1.); +#6302 = DIRECTION('',(0.,0.,1.)); +#6303 = ORIENTED_EDGE('',*,*,#6208,.F.); +#6304 = ORIENTED_EDGE('',*,*,#6305,.T.); +#6305 = EDGE_CURVE('',#6209,#6281,#6306,.T.); +#6306 = LINE('',#6307,#6308); +#6307 = CARTESIAN_POINT('',(2.025,0.5,3.175)); +#6308 = VECTOR('',#6309,1.); +#6309 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#6310 = PLANE('',#6311); +#6311 = AXIS2_PLACEMENT_3D('',#6312,#6313,#6314); +#6312 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6313 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6314 = DIRECTION('',(0.,-0.,1.)); +#6315 = ADVANCED_FACE('',(#6316),#6334,.F.); +#6316 = FACE_BOUND('',#6317,.T.); +#6317 = EDGE_LOOP('',(#6318,#6319,#6320,#6328)); +#6318 = ORIENTED_EDGE('',*,*,#6305,.F.); +#6319 = ORIENTED_EDGE('',*,*,#6266,.T.); +#6320 = ORIENTED_EDGE('',*,*,#6321,.T.); +#6321 = EDGE_CURVE('',#6259,#6322,#6324,.T.); +#6322 = VERTEX_POINT('',#6323); +#6323 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#6324 = LINE('',#6325,#6326); +#6325 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#6326 = VECTOR('',#6327,1.); +#6327 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#6328 = ORIENTED_EDGE('',*,*,#6329,.F.); +#6329 = EDGE_CURVE('',#6281,#6322,#6330,.T.); +#6330 = LINE('',#6331,#6332); +#6331 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#6332 = VECTOR('',#6333,1.); +#6333 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6334 = PLANE('',#6335); +#6335 = AXIS2_PLACEMENT_3D('',#6336,#6337,#6338); +#6336 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#6337 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#6338 = DIRECTION('',(1.224646799147E-16,1.,-2.103984282776E-29)); +#6339 = ADVANCED_FACE('',(#6340),#6399,.F.); +#6340 = FACE_BOUND('',#6341,.F.); +#6341 = EDGE_LOOP('',(#6342,#6352,#6360,#6368,#6376,#6385,#6391,#6392, + #6393)); +#6342 = ORIENTED_EDGE('',*,*,#6343,.F.); +#6343 = EDGE_CURVE('',#6344,#6346,#6348,.T.); +#6344 = VERTEX_POINT('',#6345); +#6345 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6346 = VERTEX_POINT('',#6347); +#6347 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6348 = LINE('',#6349,#6350); +#6349 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6350 = VECTOR('',#6351,1.); +#6351 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6352 = ORIENTED_EDGE('',*,*,#6353,.T.); +#6353 = EDGE_CURVE('',#6344,#6354,#6356,.T.); +#6354 = VERTEX_POINT('',#6355); +#6355 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#6356 = LINE('',#6357,#6358); +#6357 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6358 = VECTOR('',#6359,1.); +#6359 = DIRECTION('',(0.,0.,1.)); +#6360 = ORIENTED_EDGE('',*,*,#6361,.T.); +#6361 = EDGE_CURVE('',#6354,#6362,#6364,.T.); +#6362 = VERTEX_POINT('',#6363); +#6363 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#6364 = LINE('',#6365,#6366); +#6365 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#6366 = VECTOR('',#6367,1.); +#6367 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6368 = ORIENTED_EDGE('',*,*,#6369,.T.); +#6369 = EDGE_CURVE('',#6362,#6370,#6372,.T.); +#6370 = VERTEX_POINT('',#6371); +#6371 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#6372 = LINE('',#6373,#6374); +#6373 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#6374 = VECTOR('',#6375,1.); +#6375 = DIRECTION('',(-0.,0.,-1.)); +#6376 = ORIENTED_EDGE('',*,*,#6377,.F.); +#6377 = EDGE_CURVE('',#6378,#6370,#6380,.T.); +#6378 = VERTEX_POINT('',#6379); +#6379 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#6380 = CIRCLE('',#6381,0.5); +#6381 = AXIS2_PLACEMENT_3D('',#6382,#6383,#6384); +#6382 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#6383 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6384 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6385 = ORIENTED_EDGE('',*,*,#6386,.T.); +#6386 = EDGE_CURVE('',#6378,#6291,#6387,.T.); +#6387 = LINE('',#6388,#6389); +#6388 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#6389 = VECTOR('',#6390,1.); +#6390 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6391 = ORIENTED_EDGE('',*,*,#6298,.T.); +#6392 = ORIENTED_EDGE('',*,*,#6218,.T.); +#6393 = ORIENTED_EDGE('',*,*,#6394,.F.); +#6394 = EDGE_CURVE('',#6346,#6219,#6395,.T.); +#6395 = LINE('',#6396,#6397); +#6396 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6397 = VECTOR('',#6398,1.); +#6398 = DIRECTION('',(0.,0.,1.)); +#6399 = PLANE('',#6400); +#6400 = AXIS2_PLACEMENT_3D('',#6401,#6402,#6403); +#6401 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#6402 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6403 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6404 = ADVANCED_FACE('',(#6405),#6423,.F.); +#6405 = FACE_BOUND('',#6406,.T.); +#6406 = EDGE_LOOP('',(#6407,#6408,#6409,#6417)); +#6407 = ORIENTED_EDGE('',*,*,#6321,.F.); +#6408 = ORIENTED_EDGE('',*,*,#6258,.T.); +#6409 = ORIENTED_EDGE('',*,*,#6410,.T.); +#6410 = EDGE_CURVE('',#6251,#6411,#6413,.T.); +#6411 = VERTEX_POINT('',#6412); +#6412 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#6413 = LINE('',#6414,#6415); +#6414 = CARTESIAN_POINT('',(7.383333333333,-0.933333333333, + 5.083333333333)); +#6415 = VECTOR('',#6416,1.); +#6416 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#6417 = ORIENTED_EDGE('',*,*,#6418,.F.); +#6418 = EDGE_CURVE('',#6322,#6411,#6419,.T.); +#6419 = LINE('',#6420,#6421); +#6420 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#6421 = VECTOR('',#6422,1.); +#6422 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6423 = PLANE('',#6424); +#6424 = AXIS2_PLACEMENT_3D('',#6425,#6426,#6427); +#6425 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#6426 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#6427 = DIRECTION('',(-1.,1.224646799147E-16,-2.105273685727E-29)); +#6428 = ADVANCED_FACE('',(#6429),#6575,.F.); +#6429 = FACE_BOUND('',#6430,.F.); +#6430 = EDGE_LOOP('',(#6431,#6439,#6440,#6441,#6449,#6457,#6465,#6473, + #6481,#6489,#6497,#6505,#6513,#6521,#6529,#6537,#6545,#6553,#6561, + #6569)); +#6431 = ORIENTED_EDGE('',*,*,#6432,.F.); +#6432 = EDGE_CURVE('',#6346,#6433,#6435,.T.); +#6433 = VERTEX_POINT('',#6434); +#6434 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#6435 = LINE('',#6436,#6437); +#6436 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6437 = VECTOR('',#6438,1.); +#6438 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6439 = ORIENTED_EDGE('',*,*,#6394,.T.); +#6440 = ORIENTED_EDGE('',*,*,#6226,.T.); +#6441 = ORIENTED_EDGE('',*,*,#6442,.F.); +#6442 = EDGE_CURVE('',#6443,#6227,#6445,.T.); +#6443 = VERTEX_POINT('',#6444); +#6444 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6445 = LINE('',#6446,#6447); +#6446 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6447 = VECTOR('',#6448,1.); +#6448 = DIRECTION('',(0.,0.,1.)); +#6449 = ORIENTED_EDGE('',*,*,#6450,.F.); +#6450 = EDGE_CURVE('',#6451,#6443,#6453,.T.); +#6451 = VERTEX_POINT('',#6452); +#6452 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#6453 = LINE('',#6454,#6455); +#6454 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6455 = VECTOR('',#6456,1.); +#6456 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6457 = ORIENTED_EDGE('',*,*,#6458,.F.); +#6458 = EDGE_CURVE('',#6459,#6451,#6461,.T.); +#6459 = VERTEX_POINT('',#6460); +#6460 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#6461 = LINE('',#6462,#6463); +#6462 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#6463 = VECTOR('',#6464,1.); +#6464 = DIRECTION('',(-0.,0.,-1.)); +#6465 = ORIENTED_EDGE('',*,*,#6466,.T.); +#6466 = EDGE_CURVE('',#6459,#6467,#6469,.T.); +#6467 = VERTEX_POINT('',#6468); +#6468 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#6469 = LINE('',#6470,#6471); +#6470 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#6471 = VECTOR('',#6472,1.); +#6472 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6473 = ORIENTED_EDGE('',*,*,#6474,.T.); +#6474 = EDGE_CURVE('',#6467,#6475,#6477,.T.); +#6475 = VERTEX_POINT('',#6476); +#6476 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#6477 = LINE('',#6478,#6479); +#6478 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#6479 = VECTOR('',#6480,1.); +#6480 = DIRECTION('',(-0.,0.,-1.)); +#6481 = ORIENTED_EDGE('',*,*,#6482,.F.); +#6482 = EDGE_CURVE('',#6483,#6475,#6485,.T.); +#6483 = VERTEX_POINT('',#6484); +#6484 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#6485 = LINE('',#6486,#6487); +#6486 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6487 = VECTOR('',#6488,1.); +#6488 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6489 = ORIENTED_EDGE('',*,*,#6490,.F.); +#6490 = EDGE_CURVE('',#6491,#6483,#6493,.T.); +#6491 = VERTEX_POINT('',#6492); +#6492 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#6493 = LINE('',#6494,#6495); +#6494 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#6495 = VECTOR('',#6496,1.); +#6496 = DIRECTION('',(-0.,0.,-1.)); +#6497 = ORIENTED_EDGE('',*,*,#6498,.T.); +#6498 = EDGE_CURVE('',#6491,#6499,#6501,.T.); +#6499 = VERTEX_POINT('',#6500); +#6500 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#6501 = LINE('',#6502,#6503); +#6502 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#6503 = VECTOR('',#6504,1.); +#6504 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6505 = ORIENTED_EDGE('',*,*,#6506,.T.); +#6506 = EDGE_CURVE('',#6499,#6507,#6509,.T.); +#6507 = VERTEX_POINT('',#6508); +#6508 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#6509 = LINE('',#6510,#6511); +#6510 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#6511 = VECTOR('',#6512,1.); +#6512 = DIRECTION('',(-0.,0.,-1.)); +#6513 = ORIENTED_EDGE('',*,*,#6514,.F.); +#6514 = EDGE_CURVE('',#6515,#6507,#6517,.T.); +#6515 = VERTEX_POINT('',#6516); +#6516 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#6517 = LINE('',#6518,#6519); +#6518 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6519 = VECTOR('',#6520,1.); +#6520 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6521 = ORIENTED_EDGE('',*,*,#6522,.F.); +#6522 = EDGE_CURVE('',#6523,#6515,#6525,.T.); +#6523 = VERTEX_POINT('',#6524); +#6524 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#6525 = LINE('',#6526,#6527); +#6526 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#6527 = VECTOR('',#6528,1.); +#6528 = DIRECTION('',(-0.,0.,-1.)); +#6529 = ORIENTED_EDGE('',*,*,#6530,.T.); +#6530 = EDGE_CURVE('',#6523,#6531,#6533,.T.); +#6531 = VERTEX_POINT('',#6532); +#6532 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#6533 = LINE('',#6534,#6535); +#6534 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#6535 = VECTOR('',#6536,1.); +#6536 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6537 = ORIENTED_EDGE('',*,*,#6538,.T.); +#6538 = EDGE_CURVE('',#6531,#6539,#6541,.T.); +#6539 = VERTEX_POINT('',#6540); +#6540 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#6541 = LINE('',#6542,#6543); +#6542 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#6543 = VECTOR('',#6544,1.); +#6544 = DIRECTION('',(-0.,0.,-1.)); +#6545 = ORIENTED_EDGE('',*,*,#6546,.F.); +#6546 = EDGE_CURVE('',#6547,#6539,#6549,.T.); +#6547 = VERTEX_POINT('',#6548); +#6548 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#6549 = LINE('',#6550,#6551); +#6550 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6551 = VECTOR('',#6552,1.); +#6552 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6553 = ORIENTED_EDGE('',*,*,#6554,.F.); +#6554 = EDGE_CURVE('',#6555,#6547,#6557,.T.); +#6555 = VERTEX_POINT('',#6556); +#6556 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#6557 = LINE('',#6558,#6559); +#6558 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#6559 = VECTOR('',#6560,1.); +#6560 = DIRECTION('',(-0.,0.,-1.)); +#6561 = ORIENTED_EDGE('',*,*,#6562,.T.); +#6562 = EDGE_CURVE('',#6555,#6563,#6565,.T.); +#6563 = VERTEX_POINT('',#6564); +#6564 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#6565 = LINE('',#6566,#6567); +#6566 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#6567 = VECTOR('',#6568,1.); +#6568 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6569 = ORIENTED_EDGE('',*,*,#6570,.T.); +#6570 = EDGE_CURVE('',#6563,#6433,#6571,.T.); +#6571 = LINE('',#6572,#6573); +#6572 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#6573 = VECTOR('',#6574,1.); +#6574 = DIRECTION('',(-0.,0.,-1.)); +#6575 = PLANE('',#6576); +#6576 = AXIS2_PLACEMENT_3D('',#6577,#6578,#6579); +#6577 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#6578 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6579 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6580 = ADVANCED_FACE('',(#6581),#6599,.F.); +#6581 = FACE_BOUND('',#6582,.T.); +#6582 = EDGE_LOOP('',(#6583,#6584,#6585,#6593)); +#6583 = ORIENTED_EDGE('',*,*,#6410,.F.); +#6584 = ORIENTED_EDGE('',*,*,#6250,.T.); +#6585 = ORIENTED_EDGE('',*,*,#6586,.T.); +#6586 = EDGE_CURVE('',#6243,#6587,#6589,.T.); +#6587 = VERTEX_POINT('',#6588); +#6588 = CARTESIAN_POINT('',(9.1,0.5,6.8)); +#6589 = LINE('',#6590,#6591); +#6590 = CARTESIAN_POINT('',(8.575,0.5,6.275)); +#6591 = VECTOR('',#6592,1.); +#6592 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#6593 = ORIENTED_EDGE('',*,*,#6594,.F.); +#6594 = EDGE_CURVE('',#6411,#6587,#6595,.T.); +#6595 = LINE('',#6596,#6597); +#6596 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#6597 = VECTOR('',#6598,1.); +#6598 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6599 = PLANE('',#6600); +#6600 = AXIS2_PLACEMENT_3D('',#6601,#6602,#6603); +#6601 = CARTESIAN_POINT('',(9.2,-2.65,6.9)); +#6602 = DIRECTION('',(0.707106781187,-8.659560562349E-17,-0.707106781187 + )); +#6603 = DIRECTION('',(-1.224646799147E-16,-1.,-2.103984282776E-29)); +#6604 = ADVANCED_FACE('',(#6605),#6664,.F.); +#6605 = FACE_BOUND('',#6606,.F.); +#6606 = EDGE_LOOP('',(#6607,#6615,#6616,#6617,#6625,#6633,#6642,#6650, + #6658)); +#6607 = ORIENTED_EDGE('',*,*,#6608,.F.); +#6608 = EDGE_CURVE('',#6443,#6609,#6611,.T.); +#6609 = VERTEX_POINT('',#6610); +#6610 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#6611 = LINE('',#6612,#6613); +#6612 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6613 = VECTOR('',#6614,1.); +#6614 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6615 = ORIENTED_EDGE('',*,*,#6442,.T.); +#6616 = ORIENTED_EDGE('',*,*,#6234,.T.); +#6617 = ORIENTED_EDGE('',*,*,#6618,.F.); +#6618 = EDGE_CURVE('',#6619,#6235,#6621,.T.); +#6619 = VERTEX_POINT('',#6620); +#6620 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6621 = LINE('',#6622,#6623); +#6622 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6623 = VECTOR('',#6624,1.); +#6624 = DIRECTION('',(0.,0.,1.)); +#6625 = ORIENTED_EDGE('',*,*,#6626,.F.); +#6626 = EDGE_CURVE('',#6627,#6619,#6629,.T.); +#6627 = VERTEX_POINT('',#6628); +#6628 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6629 = LINE('',#6630,#6631); +#6630 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6631 = VECTOR('',#6632,1.); +#6632 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6633 = ORIENTED_EDGE('',*,*,#6634,.F.); +#6634 = EDGE_CURVE('',#6635,#6627,#6637,.T.); +#6635 = VERTEX_POINT('',#6636); +#6636 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#6637 = CIRCLE('',#6638,0.5); +#6638 = AXIS2_PLACEMENT_3D('',#6639,#6640,#6641); +#6639 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#6640 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6641 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6642 = ORIENTED_EDGE('',*,*,#6643,.F.); +#6643 = EDGE_CURVE('',#6644,#6635,#6646,.T.); +#6644 = VERTEX_POINT('',#6645); +#6645 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6646 = LINE('',#6647,#6648); +#6647 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6648 = VECTOR('',#6649,1.); +#6649 = DIRECTION('',(-0.,0.,-1.)); +#6650 = ORIENTED_EDGE('',*,*,#6651,.T.); +#6651 = EDGE_CURVE('',#6644,#6652,#6654,.T.); +#6652 = VERTEX_POINT('',#6653); +#6653 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#6654 = LINE('',#6655,#6656); +#6655 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#6656 = VECTOR('',#6657,1.); +#6657 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6658 = ORIENTED_EDGE('',*,*,#6659,.F.); +#6659 = EDGE_CURVE('',#6609,#6652,#6660,.T.); +#6660 = LINE('',#6661,#6662); +#6661 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#6662 = VECTOR('',#6663,1.); +#6663 = DIRECTION('',(0.,0.,1.)); +#6664 = PLANE('',#6665); +#6665 = AXIS2_PLACEMENT_3D('',#6666,#6667,#6668); +#6666 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#6667 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6668 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6669 = ADVANCED_FACE('',(#6670),#6689,.T.); +#6670 = FACE_BOUND('',#6671,.T.); +#6671 = EDGE_LOOP('',(#6672,#6673,#6674,#6682,#6688)); +#6672 = ORIENTED_EDGE('',*,*,#6242,.F.); +#6673 = ORIENTED_EDGE('',*,*,#6618,.F.); +#6674 = ORIENTED_EDGE('',*,*,#6675,.T.); +#6675 = EDGE_CURVE('',#6619,#6676,#6678,.T.); +#6676 = VERTEX_POINT('',#6677); +#6677 = CARTESIAN_POINT('',(9.1,0.5,3.65)); +#6678 = LINE('',#6679,#6680); +#6679 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6680 = VECTOR('',#6681,1.); +#6681 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6682 = ORIENTED_EDGE('',*,*,#6683,.T.); +#6683 = EDGE_CURVE('',#6676,#6587,#6684,.T.); +#6684 = LINE('',#6685,#6686); +#6685 = CARTESIAN_POINT('',(9.1,0.5,5.325)); +#6686 = VECTOR('',#6687,1.); +#6687 = DIRECTION('',(0.,0.,1.)); +#6688 = ORIENTED_EDGE('',*,*,#6586,.F.); +#6689 = PLANE('',#6690); +#6690 = AXIS2_PLACEMENT_3D('',#6691,#6692,#6693); +#6691 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#6692 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6693 = DIRECTION('',(0.,-0.,1.)); +#6694 = ADVANCED_FACE('',(#6695),#6738,.F.); +#6695 = FACE_BOUND('',#6696,.F.); +#6696 = EDGE_LOOP('',(#6697,#6698,#6706,#6715,#6723,#6731,#6737)); +#6697 = ORIENTED_EDGE('',*,*,#6280,.T.); +#6698 = ORIENTED_EDGE('',*,*,#6699,.T.); +#6699 = EDGE_CURVE('',#6283,#6700,#6702,.T.); +#6700 = VERTEX_POINT('',#6701); +#6701 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#6702 = LINE('',#6703,#6704); +#6703 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#6704 = VECTOR('',#6705,1.); +#6705 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6706 = ORIENTED_EDGE('',*,*,#6707,.T.); +#6707 = EDGE_CURVE('',#6700,#6708,#6710,.T.); +#6708 = VERTEX_POINT('',#6709); +#6709 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#6710 = CIRCLE('',#6711,0.5); +#6711 = AXIS2_PLACEMENT_3D('',#6712,#6713,#6714); +#6712 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#6713 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6714 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6715 = ORIENTED_EDGE('',*,*,#6716,.T.); +#6716 = EDGE_CURVE('',#6708,#6717,#6719,.T.); +#6717 = VERTEX_POINT('',#6718); +#6718 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#6719 = LINE('',#6720,#6721); +#6720 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#6721 = VECTOR('',#6722,1.); +#6722 = DIRECTION('',(0.,0.,-1.)); +#6723 = ORIENTED_EDGE('',*,*,#6724,.T.); +#6724 = EDGE_CURVE('',#6717,#6725,#6727,.T.); +#6725 = VERTEX_POINT('',#6726); +#6726 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#6727 = LINE('',#6728,#6729); +#6728 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#6729 = VECTOR('',#6730,1.); +#6730 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6731 = ORIENTED_EDGE('',*,*,#6732,.F.); +#6732 = EDGE_CURVE('',#6322,#6725,#6733,.T.); +#6733 = LINE('',#6734,#6735); +#6734 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#6735 = VECTOR('',#6736,1.); +#6736 = DIRECTION('',(0.,0.,-1.)); +#6737 = ORIENTED_EDGE('',*,*,#6329,.F.); +#6738 = PLANE('',#6739); +#6739 = AXIS2_PLACEMENT_3D('',#6740,#6741,#6742); +#6740 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#6741 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6742 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6743 = ADVANCED_FACE('',(#6744),#6755,.T.); +#6744 = FACE_BOUND('',#6745,.T.); +#6745 = EDGE_LOOP('',(#6746,#6747,#6753,#6754)); +#6746 = ORIENTED_EDGE('',*,*,#6699,.T.); +#6747 = ORIENTED_EDGE('',*,*,#6748,.T.); +#6748 = EDGE_CURVE('',#6700,#6378,#6749,.T.); +#6749 = LINE('',#6750,#6751); +#6750 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6751 = VECTOR('',#6752,1.); +#6752 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6753 = ORIENTED_EDGE('',*,*,#6386,.T.); +#6754 = ORIENTED_EDGE('',*,*,#6290,.F.); +#6755 = PLANE('',#6756); +#6756 = AXIS2_PLACEMENT_3D('',#6757,#6758,#6759); +#6757 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#6758 = DIRECTION('',(0.,0.,1.)); +#6759 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6760 = ADVANCED_FACE('',(#6761),#6779,.F.); +#6761 = FACE_BOUND('',#6762,.F.); +#6762 = EDGE_LOOP('',(#6763,#6771,#6772,#6773)); +#6763 = ORIENTED_EDGE('',*,*,#6764,.T.); +#6764 = EDGE_CURVE('',#6765,#6344,#6767,.T.); +#6765 = VERTEX_POINT('',#6766); +#6766 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#6767 = LINE('',#6768,#6769); +#6768 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#6769 = VECTOR('',#6770,1.); +#6770 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6771 = ORIENTED_EDGE('',*,*,#6343,.T.); +#6772 = ORIENTED_EDGE('',*,*,#6432,.T.); +#6773 = ORIENTED_EDGE('',*,*,#6774,.T.); +#6774 = EDGE_CURVE('',#6433,#6765,#6775,.T.); +#6775 = LINE('',#6776,#6777); +#6776 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#6777 = VECTOR('',#6778,1.); +#6778 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6779 = PLANE('',#6780); +#6780 = AXIS2_PLACEMENT_3D('',#6781,#6782,#6783); +#6781 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#6782 = DIRECTION('',(0.,0.,1.)); +#6783 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6784 = ADVANCED_FACE('',(#6785),#6796,.F.); +#6785 = FACE_BOUND('',#6786,.F.); +#6786 = EDGE_LOOP('',(#6787,#6788,#6789,#6795)); +#6787 = ORIENTED_EDGE('',*,*,#6748,.T.); +#6788 = ORIENTED_EDGE('',*,*,#6377,.T.); +#6789 = ORIENTED_EDGE('',*,*,#6790,.F.); +#6790 = EDGE_CURVE('',#6708,#6370,#6791,.T.); +#6791 = LINE('',#6792,#6793); +#6792 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#6793 = VECTOR('',#6794,1.); +#6794 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6795 = ORIENTED_EDGE('',*,*,#6707,.F.); +#6796 = CYLINDRICAL_SURFACE('',#6797,0.5); +#6797 = AXIS2_PLACEMENT_3D('',#6798,#6799,#6800); +#6798 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#6799 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#6800 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#6801 = ADVANCED_FACE('',(#6802),#6966,.T.); +#6802 = FACE_BOUND('',#6803,.T.); +#6803 = EDGE_LOOP('',(#6804,#6805,#6813,#6821,#6829,#6837,#6845,#6854, + #6862,#6870,#6878,#6886,#6894,#6903,#6911,#6919,#6927,#6935,#6941, + #6942,#6943,#6944,#6952,#6960)); +#6804 = ORIENTED_EDGE('',*,*,#6643,.F.); +#6805 = ORIENTED_EDGE('',*,*,#6806,.T.); +#6806 = EDGE_CURVE('',#6644,#6807,#6809,.T.); +#6807 = VERTEX_POINT('',#6808); +#6808 = CARTESIAN_POINT('',(8.,1.5,7.)); +#6809 = LINE('',#6810,#6811); +#6810 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6811 = VECTOR('',#6812,1.); +#6812 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6813 = ORIENTED_EDGE('',*,*,#6814,.T.); +#6814 = EDGE_CURVE('',#6807,#6815,#6817,.T.); +#6815 = VERTEX_POINT('',#6816); +#6816 = CARTESIAN_POINT('',(8.,1.5,6.1)); +#6817 = LINE('',#6818,#6819); +#6818 = CARTESIAN_POINT('',(8.,1.5,5.318198005698)); +#6819 = VECTOR('',#6820,1.); +#6820 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6821 = ORIENTED_EDGE('',*,*,#6822,.T.); +#6822 = EDGE_CURVE('',#6815,#6823,#6825,.T.); +#6823 = VERTEX_POINT('',#6824); +#6824 = CARTESIAN_POINT('',(7.75,1.5,5.85)); +#6825 = LINE('',#6826,#6827); +#6826 = CARTESIAN_POINT('',(6.421599002849,1.5,4.521599002849)); +#6827 = VECTOR('',#6828,1.); +#6828 = DIRECTION('',(-0.707106781187,1.466048277022E-16,-0.707106781187 + )); +#6829 = ORIENTED_EDGE('',*,*,#6830,.T.); +#6830 = EDGE_CURVE('',#6823,#6831,#6833,.T.); +#6831 = VERTEX_POINT('',#6832); +#6832 = CARTESIAN_POINT('',(8.,1.5,5.6)); +#6833 = LINE('',#6834,#6835); +#6834 = CARTESIAN_POINT('',(7.203400997151,1.5,6.396599002849)); +#6835 = VECTOR('',#6836,1.); +#6836 = DIRECTION('',(0.707106781187,-2.658638354479E-17,-0.707106781187 + )); +#6837 = ORIENTED_EDGE('',*,*,#6838,.T.); +#6838 = EDGE_CURVE('',#6831,#6839,#6841,.T.); +#6839 = VERTEX_POINT('',#6840); +#6840 = CARTESIAN_POINT('',(8.,1.5,3.85)); +#6841 = LINE('',#6842,#6843); +#6842 = CARTESIAN_POINT('',(8.,1.5,3.818198005698)); +#6843 = VECTOR('',#6844,1.); +#6844 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6845 = ORIENTED_EDGE('',*,*,#6846,.F.); +#6846 = EDGE_CURVE('',#6847,#6839,#6849,.T.); +#6847 = VERTEX_POINT('',#6848); +#6848 = CARTESIAN_POINT('',(7.25,1.5,3.1)); +#6849 = CIRCLE('',#6850,0.75); +#6850 = AXIS2_PLACEMENT_3D('',#6851,#6852,#6853); +#6851 = CARTESIAN_POINT('',(7.25,1.5,3.85)); +#6852 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6853 = DIRECTION('',(-0.,0.,-1.)); +#6854 = ORIENTED_EDGE('',*,*,#6855,.T.); +#6855 = EDGE_CURVE('',#6847,#6856,#6858,.T.); +#6856 = VERTEX_POINT('',#6857); +#6857 = CARTESIAN_POINT('',(6.5,1.5,3.1)); +#6858 = LINE('',#6859,#6860); +#6859 = CARTESIAN_POINT('',(5.125,1.5,3.1)); +#6860 = VECTOR('',#6861,1.); +#6861 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6862 = ORIENTED_EDGE('',*,*,#6863,.T.); +#6863 = EDGE_CURVE('',#6856,#6864,#6866,.T.); +#6864 = VERTEX_POINT('',#6865); +#6865 = CARTESIAN_POINT('',(6.5,1.5,7.)); +#6866 = LINE('',#6867,#6868); +#6867 = CARTESIAN_POINT('',(6.5,1.5,5.768198005698)); +#6868 = VECTOR('',#6869,1.); +#6869 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#6870 = ORIENTED_EDGE('',*,*,#6871,.T.); +#6871 = EDGE_CURVE('',#6864,#6872,#6874,.T.); +#6872 = VERTEX_POINT('',#6873); +#6873 = CARTESIAN_POINT('',(1.,1.5,7.)); +#6874 = LINE('',#6875,#6876); +#6875 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6876 = VECTOR('',#6877,1.); +#6877 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6878 = ORIENTED_EDGE('',*,*,#6879,.F.); +#6879 = EDGE_CURVE('',#6880,#6872,#6882,.T.); +#6880 = VERTEX_POINT('',#6881); +#6881 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#6882 = LINE('',#6883,#6884); +#6883 = CARTESIAN_POINT('',(1.,1.5,5.768198005698)); +#6884 = VECTOR('',#6885,1.); +#6885 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#6886 = ORIENTED_EDGE('',*,*,#6887,.F.); +#6887 = EDGE_CURVE('',#6888,#6880,#6890,.T.); +#6888 = VERTEX_POINT('',#6889); +#6889 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#6890 = LINE('',#6891,#6892); +#6891 = CARTESIAN_POINT('',(2.375,1.5,3.1)); +#6892 = VECTOR('',#6893,1.); +#6893 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#6894 = ORIENTED_EDGE('',*,*,#6895,.F.); +#6895 = EDGE_CURVE('',#6896,#6888,#6898,.T.); +#6896 = VERTEX_POINT('',#6897); +#6897 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#6898 = CIRCLE('',#6899,0.75); +#6899 = AXIS2_PLACEMENT_3D('',#6900,#6901,#6902); +#6900 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#6901 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6902 = DIRECTION('',(-0.,0.,-1.)); +#6903 = ORIENTED_EDGE('',*,*,#6904,.F.); +#6904 = EDGE_CURVE('',#6905,#6896,#6907,.T.); +#6905 = VERTEX_POINT('',#6906); +#6906 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#6907 = LINE('',#6908,#6909); +#6908 = CARTESIAN_POINT('',(-0.5,1.5,3.818198005698)); +#6909 = VECTOR('',#6910,1.); +#6910 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6911 = ORIENTED_EDGE('',*,*,#6912,.F.); +#6912 = EDGE_CURVE('',#6913,#6905,#6915,.T.); +#6913 = VERTEX_POINT('',#6914); +#6914 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#6915 = LINE('',#6916,#6917); +#6916 = CARTESIAN_POINT('',(0.296599002849,1.5,6.396599002849)); +#6917 = VECTOR('',#6918,1.); +#6918 = DIRECTION('',(-0.707106781187,1.466048277022E-16,-0.707106781187 + )); +#6919 = ORIENTED_EDGE('',*,*,#6920,.F.); +#6920 = EDGE_CURVE('',#6921,#6913,#6923,.T.); +#6921 = VERTEX_POINT('',#6922); +#6922 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#6923 = LINE('',#6924,#6925); +#6924 = CARTESIAN_POINT('',(1.078400997151,1.5,4.521599002849)); +#6925 = VECTOR('',#6926,1.); +#6926 = DIRECTION('',(0.707106781187,-2.658638354479E-17,-0.707106781187 + )); +#6927 = ORIENTED_EDGE('',*,*,#6928,.F.); +#6928 = EDGE_CURVE('',#6929,#6921,#6931,.T.); +#6929 = VERTEX_POINT('',#6930); +#6930 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#6931 = LINE('',#6932,#6933); +#6932 = CARTESIAN_POINT('',(-0.5,1.5,5.318198005698)); +#6933 = VECTOR('',#6934,1.); +#6934 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#6935 = ORIENTED_EDGE('',*,*,#6936,.T.); +#6936 = EDGE_CURVE('',#6929,#6362,#6937,.T.); +#6937 = LINE('',#6938,#6939); +#6938 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#6939 = VECTOR('',#6940,1.); +#6940 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6941 = ORIENTED_EDGE('',*,*,#6369,.T.); +#6942 = ORIENTED_EDGE('',*,*,#6790,.F.); +#6943 = ORIENTED_EDGE('',*,*,#6716,.T.); +#6944 = ORIENTED_EDGE('',*,*,#6945,.F.); +#6945 = EDGE_CURVE('',#6946,#6717,#6948,.T.); +#6946 = VERTEX_POINT('',#6947); +#6947 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#6948 = LINE('',#6949,#6950); +#6949 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#6950 = VECTOR('',#6951,1.); +#6951 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6952 = ORIENTED_EDGE('',*,*,#6953,.F.); +#6953 = EDGE_CURVE('',#6954,#6946,#6956,.T.); +#6954 = VERTEX_POINT('',#6955); +#6955 = CARTESIAN_POINT('',(9.1,1.5,4.15)); +#6956 = LINE('',#6957,#6958); +#6957 = CARTESIAN_POINT('',(9.1,1.5,7.)); +#6958 = VECTOR('',#6959,1.); +#6959 = DIRECTION('',(0.,0.,-1.)); +#6960 = ORIENTED_EDGE('',*,*,#6961,.F.); +#6961 = EDGE_CURVE('',#6635,#6954,#6962,.T.); +#6962 = LINE('',#6963,#6964); +#6963 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#6964 = VECTOR('',#6965,1.); +#6965 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6966 = PLANE('',#6967); +#6967 = AXIS2_PLACEMENT_3D('',#6968,#6969,#6970); +#6968 = CARTESIAN_POINT('',(3.75,1.5,4.536396011396)); +#6969 = DIRECTION('',(-1.224646799147E-16,-1.,-8.486585573121E-17)); +#6970 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#6971 = ADVANCED_FACE('',(#6972),#6990,.T.); +#6972 = FACE_BOUND('',#6973,.T.); +#6973 = EDGE_LOOP('',(#6974,#6975,#6983,#6989)); +#6974 = ORIENTED_EDGE('',*,*,#6936,.F.); +#6975 = ORIENTED_EDGE('',*,*,#6976,.F.); +#6976 = EDGE_CURVE('',#6977,#6929,#6979,.T.); +#6977 = VERTEX_POINT('',#6978); +#6978 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#6979 = LINE('',#6980,#6981); +#6980 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#6981 = VECTOR('',#6982,1.); +#6982 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#6983 = ORIENTED_EDGE('',*,*,#6984,.T.); +#6984 = EDGE_CURVE('',#6977,#6354,#6985,.T.); +#6985 = LINE('',#6986,#6987); +#6986 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#6987 = VECTOR('',#6988,1.); +#6988 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6989 = ORIENTED_EDGE('',*,*,#6361,.T.); +#6990 = PLANE('',#6991); +#6991 = AXIS2_PLACEMENT_3D('',#6992,#6993,#6994); +#6992 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#6993 = DIRECTION('',(0.,0.,1.)); +#6994 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#6995 = ADVANCED_FACE('',(#6996),#7256,.F.); +#6996 = FACE_BOUND('',#6997,.F.); +#6997 = EDGE_LOOP('',(#6998,#7006,#7007,#7015,#7023,#7031,#7039,#7047, + #7056,#7064,#7072,#7080,#7088,#7096,#7105,#7113,#7121,#7129,#7135, + #7136,#7137,#7138,#7146,#7154,#7162,#7170,#7178,#7186,#7194,#7202, + #7210,#7218,#7226,#7234,#7242,#7250)); +#6998 = ORIENTED_EDGE('',*,*,#6999,.F.); +#6999 = EDGE_CURVE('',#6609,#7000,#7002,.T.); +#7000 = VERTEX_POINT('',#7001); +#7001 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#7002 = LINE('',#7003,#7004); +#7003 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7004 = VECTOR('',#7005,1.); +#7005 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7006 = ORIENTED_EDGE('',*,*,#6659,.T.); +#7007 = ORIENTED_EDGE('',*,*,#7008,.T.); +#7008 = EDGE_CURVE('',#6652,#7009,#7011,.T.); +#7009 = VERTEX_POINT('',#7010); +#7010 = CARTESIAN_POINT('',(8.,2.35,7.)); +#7011 = LINE('',#7012,#7013); +#7012 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#7013 = VECTOR('',#7014,1.); +#7014 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7015 = ORIENTED_EDGE('',*,*,#7016,.F.); +#7016 = EDGE_CURVE('',#7017,#7009,#7019,.T.); +#7017 = VERTEX_POINT('',#7018); +#7018 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#7019 = LINE('',#7020,#7021); +#7020 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#7021 = VECTOR('',#7022,1.); +#7022 = DIRECTION('',(0.,0.,1.)); +#7023 = ORIENTED_EDGE('',*,*,#7024,.F.); +#7024 = EDGE_CURVE('',#7025,#7017,#7027,.T.); +#7025 = VERTEX_POINT('',#7026); +#7026 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#7027 = LINE('',#7028,#7029); +#7028 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#7029 = VECTOR('',#7030,1.); +#7030 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#7031 = ORIENTED_EDGE('',*,*,#7032,.F.); +#7032 = EDGE_CURVE('',#7033,#7025,#7035,.T.); +#7033 = VERTEX_POINT('',#7034); +#7034 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#7035 = LINE('',#7036,#7037); +#7036 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#7037 = VECTOR('',#7038,1.); +#7038 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7039 = ORIENTED_EDGE('',*,*,#7040,.F.); +#7040 = EDGE_CURVE('',#7041,#7033,#7043,.T.); +#7041 = VERTEX_POINT('',#7042); +#7042 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#7043 = LINE('',#7044,#7045); +#7044 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#7045 = VECTOR('',#7046,1.); +#7046 = DIRECTION('',(0.,0.,1.)); +#7047 = ORIENTED_EDGE('',*,*,#7048,.F.); +#7048 = EDGE_CURVE('',#7049,#7041,#7051,.T.); +#7049 = VERTEX_POINT('',#7050); +#7050 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#7051 = CIRCLE('',#7052,0.75); +#7052 = AXIS2_PLACEMENT_3D('',#7053,#7054,#7055); +#7053 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#7054 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7055 = DIRECTION('',(0.,0.,1.)); +#7056 = ORIENTED_EDGE('',*,*,#7057,.F.); +#7057 = EDGE_CURVE('',#7058,#7049,#7060,.T.); +#7058 = VERTEX_POINT('',#7059); +#7059 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#7060 = LINE('',#7061,#7062); +#7061 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#7062 = VECTOR('',#7063,1.); +#7063 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7064 = ORIENTED_EDGE('',*,*,#7065,.F.); +#7065 = EDGE_CURVE('',#7066,#7058,#7068,.T.); +#7066 = VERTEX_POINT('',#7067); +#7067 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#7068 = LINE('',#7069,#7070); +#7069 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#7070 = VECTOR('',#7071,1.); +#7071 = DIRECTION('',(-0.,0.,-1.)); +#7072 = ORIENTED_EDGE('',*,*,#7073,.T.); +#7073 = EDGE_CURVE('',#7066,#7074,#7076,.T.); +#7074 = VERTEX_POINT('',#7075); +#7075 = CARTESIAN_POINT('',(1.,2.35,7.)); +#7076 = LINE('',#7077,#7078); +#7077 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#7078 = VECTOR('',#7079,1.); +#7079 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7080 = ORIENTED_EDGE('',*,*,#7081,.T.); +#7081 = EDGE_CURVE('',#7074,#7082,#7084,.T.); +#7082 = VERTEX_POINT('',#7083); +#7083 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#7084 = LINE('',#7085,#7086); +#7085 = CARTESIAN_POINT('',(1.,2.35,7.)); +#7086 = VECTOR('',#7087,1.); +#7087 = DIRECTION('',(-0.,0.,-1.)); +#7088 = ORIENTED_EDGE('',*,*,#7089,.T.); +#7089 = EDGE_CURVE('',#7082,#7090,#7092,.T.); +#7090 = VERTEX_POINT('',#7091); +#7091 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#7092 = LINE('',#7093,#7094); +#7093 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#7094 = VECTOR('',#7095,1.); +#7095 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7096 = ORIENTED_EDGE('',*,*,#7097,.T.); +#7097 = EDGE_CURVE('',#7090,#7098,#7100,.T.); +#7098 = VERTEX_POINT('',#7099); +#7099 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#7100 = CIRCLE('',#7101,0.75); +#7101 = AXIS2_PLACEMENT_3D('',#7102,#7103,#7104); +#7102 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#7103 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#7104 = DIRECTION('',(0.,0.,1.)); +#7105 = ORIENTED_EDGE('',*,*,#7106,.T.); +#7106 = EDGE_CURVE('',#7098,#7107,#7109,.T.); +#7107 = VERTEX_POINT('',#7108); +#7108 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7109 = LINE('',#7110,#7111); +#7110 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#7111 = VECTOR('',#7112,1.); +#7112 = DIRECTION('',(0.,0.,1.)); +#7113 = ORIENTED_EDGE('',*,*,#7114,.T.); +#7114 = EDGE_CURVE('',#7107,#7115,#7117,.T.); +#7115 = VERTEX_POINT('',#7116); +#7116 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7117 = LINE('',#7118,#7119); +#7118 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7119 = VECTOR('',#7120,1.); +#7120 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#7121 = ORIENTED_EDGE('',*,*,#7122,.T.); +#7122 = EDGE_CURVE('',#7115,#7123,#7125,.T.); +#7123 = VERTEX_POINT('',#7124); +#7124 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7125 = LINE('',#7126,#7127); +#7126 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7127 = VECTOR('',#7128,1.); +#7128 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7129 = ORIENTED_EDGE('',*,*,#7130,.T.); +#7130 = EDGE_CURVE('',#7123,#6977,#7131,.T.); +#7131 = LINE('',#7132,#7133); +#7132 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7133 = VECTOR('',#7134,1.); +#7134 = DIRECTION('',(0.,0.,1.)); +#7135 = ORIENTED_EDGE('',*,*,#6984,.T.); +#7136 = ORIENTED_EDGE('',*,*,#6353,.F.); +#7137 = ORIENTED_EDGE('',*,*,#6764,.F.); +#7138 = ORIENTED_EDGE('',*,*,#7139,.T.); +#7139 = EDGE_CURVE('',#6765,#7140,#7142,.T.); +#7140 = VERTEX_POINT('',#7141); +#7141 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#7142 = LINE('',#7143,#7144); +#7143 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#7144 = VECTOR('',#7145,1.); +#7145 = DIRECTION('',(0.,0.,1.)); +#7146 = ORIENTED_EDGE('',*,*,#7147,.F.); +#7147 = EDGE_CURVE('',#7148,#7140,#7150,.T.); +#7148 = VERTEX_POINT('',#7149); +#7149 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#7150 = LINE('',#7151,#7152); +#7151 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#7152 = VECTOR('',#7153,1.); +#7153 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7154 = ORIENTED_EDGE('',*,*,#7155,.F.); +#7155 = EDGE_CURVE('',#7156,#7148,#7158,.T.); +#7156 = VERTEX_POINT('',#7157); +#7157 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#7158 = LINE('',#7159,#7160); +#7159 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#7160 = VECTOR('',#7161,1.); +#7161 = DIRECTION('',(0.,0.,1.)); +#7162 = ORIENTED_EDGE('',*,*,#7163,.F.); +#7163 = EDGE_CURVE('',#7164,#7156,#7166,.T.); +#7164 = VERTEX_POINT('',#7165); +#7165 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#7166 = LINE('',#7167,#7168); +#7167 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7168 = VECTOR('',#7169,1.); +#7169 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7170 = ORIENTED_EDGE('',*,*,#7171,.T.); +#7171 = EDGE_CURVE('',#7164,#7172,#7174,.T.); +#7172 = VERTEX_POINT('',#7173); +#7173 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#7174 = LINE('',#7175,#7176); +#7175 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#7176 = VECTOR('',#7177,1.); +#7177 = DIRECTION('',(0.,0.,1.)); +#7178 = ORIENTED_EDGE('',*,*,#7179,.F.); +#7179 = EDGE_CURVE('',#7180,#7172,#7182,.T.); +#7180 = VERTEX_POINT('',#7181); +#7181 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#7182 = LINE('',#7183,#7184); +#7183 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#7184 = VECTOR('',#7185,1.); +#7185 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7186 = ORIENTED_EDGE('',*,*,#7187,.F.); +#7187 = EDGE_CURVE('',#7188,#7180,#7190,.T.); +#7188 = VERTEX_POINT('',#7189); +#7189 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#7190 = LINE('',#7191,#7192); +#7191 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#7192 = VECTOR('',#7193,1.); +#7193 = DIRECTION('',(0.,0.,1.)); +#7194 = ORIENTED_EDGE('',*,*,#7195,.F.); +#7195 = EDGE_CURVE('',#7196,#7188,#7198,.T.); +#7196 = VERTEX_POINT('',#7197); +#7197 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#7198 = LINE('',#7199,#7200); +#7199 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7200 = VECTOR('',#7201,1.); +#7201 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7202 = ORIENTED_EDGE('',*,*,#7203,.T.); +#7203 = EDGE_CURVE('',#7196,#7204,#7206,.T.); +#7204 = VERTEX_POINT('',#7205); +#7205 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#7206 = LINE('',#7207,#7208); +#7207 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#7208 = VECTOR('',#7209,1.); +#7209 = DIRECTION('',(0.,0.,1.)); +#7210 = ORIENTED_EDGE('',*,*,#7211,.F.); +#7211 = EDGE_CURVE('',#7212,#7204,#7214,.T.); +#7212 = VERTEX_POINT('',#7213); +#7213 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#7214 = LINE('',#7215,#7216); +#7215 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#7216 = VECTOR('',#7217,1.); +#7217 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7218 = ORIENTED_EDGE('',*,*,#7219,.F.); +#7219 = EDGE_CURVE('',#7220,#7212,#7222,.T.); +#7220 = VERTEX_POINT('',#7221); +#7221 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#7222 = LINE('',#7223,#7224); +#7223 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#7224 = VECTOR('',#7225,1.); +#7225 = DIRECTION('',(0.,0.,1.)); +#7226 = ORIENTED_EDGE('',*,*,#7227,.F.); +#7227 = EDGE_CURVE('',#7228,#7220,#7230,.T.); +#7228 = VERTEX_POINT('',#7229); +#7229 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#7230 = LINE('',#7231,#7232); +#7231 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7232 = VECTOR('',#7233,1.); +#7233 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7234 = ORIENTED_EDGE('',*,*,#7235,.T.); +#7235 = EDGE_CURVE('',#7228,#7236,#7238,.T.); +#7236 = VERTEX_POINT('',#7237); +#7237 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#7238 = LINE('',#7239,#7240); +#7239 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#7240 = VECTOR('',#7241,1.); +#7241 = DIRECTION('',(0.,0.,1.)); +#7242 = ORIENTED_EDGE('',*,*,#7243,.F.); +#7243 = EDGE_CURVE('',#7244,#7236,#7246,.T.); +#7244 = VERTEX_POINT('',#7245); +#7245 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#7246 = LINE('',#7247,#7248); +#7247 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#7248 = VECTOR('',#7249,1.); +#7249 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7250 = ORIENTED_EDGE('',*,*,#7251,.F.); +#7251 = EDGE_CURVE('',#7000,#7244,#7252,.T.); +#7252 = LINE('',#7253,#7254); +#7253 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#7254 = VECTOR('',#7255,1.); +#7255 = DIRECTION('',(0.,0.,1.)); +#7256 = PLANE('',#7257); +#7257 = AXIS2_PLACEMENT_3D('',#7258,#7259,#7260); +#7258 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#7259 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7260 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7261 = ADVANCED_FACE('',(#7262),#7280,.F.); +#7262 = FACE_BOUND('',#7263,.F.); +#7263 = EDGE_LOOP('',(#7264,#7265,#7273,#7279)); +#7264 = ORIENTED_EDGE('',*,*,#6732,.T.); +#7265 = ORIENTED_EDGE('',*,*,#7266,.T.); +#7266 = EDGE_CURVE('',#6725,#7267,#7269,.T.); +#7267 = VERTEX_POINT('',#7268); +#7268 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#7269 = LINE('',#7270,#7271); +#7270 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#7271 = VECTOR('',#7272,1.); +#7272 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7273 = ORIENTED_EDGE('',*,*,#7274,.F.); +#7274 = EDGE_CURVE('',#6411,#7267,#7275,.T.); +#7275 = LINE('',#7276,#7277); +#7276 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#7277 = VECTOR('',#7278,1.); +#7278 = DIRECTION('',(0.,0.,-1.)); +#7279 = ORIENTED_EDGE('',*,*,#6418,.F.); +#7280 = PLANE('',#7281); +#7281 = AXIS2_PLACEMENT_3D('',#7282,#7283,#7284); +#7282 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#7283 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7284 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7285 = ADVANCED_FACE('',(#7286),#7313,.T.); +#7286 = FACE_BOUND('',#7287,.T.); +#7287 = EDGE_LOOP('',(#7288,#7289,#7297,#7305,#7311,#7312)); +#7288 = ORIENTED_EDGE('',*,*,#7139,.T.); +#7289 = ORIENTED_EDGE('',*,*,#7290,.T.); +#7290 = EDGE_CURVE('',#7140,#7291,#7293,.T.); +#7291 = VERTEX_POINT('',#7292); +#7292 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#7293 = LINE('',#7294,#7295); +#7294 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#7295 = VECTOR('',#7296,1.); +#7296 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7297 = ORIENTED_EDGE('',*,*,#7298,.T.); +#7298 = EDGE_CURVE('',#7291,#7299,#7301,.T.); +#7299 = VERTEX_POINT('',#7300); +#7300 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#7301 = LINE('',#7302,#7303); +#7302 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#7303 = VECTOR('',#7304,1.); +#7304 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7305 = ORIENTED_EDGE('',*,*,#7306,.T.); +#7306 = EDGE_CURVE('',#7299,#6563,#7307,.T.); +#7307 = LINE('',#7308,#7309); +#7308 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#7309 = VECTOR('',#7310,1.); +#7310 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7311 = ORIENTED_EDGE('',*,*,#6570,.T.); +#7312 = ORIENTED_EDGE('',*,*,#6774,.T.); +#7313 = PLANE('',#7314); +#7314 = AXIS2_PLACEMENT_3D('',#7315,#7316,#7317); +#7315 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#7316 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7317 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7318 = ADVANCED_FACE('',(#7319),#7337,.F.); +#7319 = FACE_BOUND('',#7320,.F.); +#7320 = EDGE_LOOP('',(#7321,#7329,#7330,#7331)); +#7321 = ORIENTED_EDGE('',*,*,#7322,.T.); +#7322 = EDGE_CURVE('',#7323,#7299,#7325,.T.); +#7323 = VERTEX_POINT('',#7324); +#7324 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7325 = LINE('',#7326,#7327); +#7326 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7327 = VECTOR('',#7328,1.); +#7328 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7329 = ORIENTED_EDGE('',*,*,#7306,.T.); +#7330 = ORIENTED_EDGE('',*,*,#6562,.F.); +#7331 = ORIENTED_EDGE('',*,*,#7332,.F.); +#7332 = EDGE_CURVE('',#7323,#6555,#7333,.T.); +#7333 = LINE('',#7334,#7335); +#7334 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7335 = VECTOR('',#7336,1.); +#7336 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7337 = PLANE('',#7338); +#7338 = AXIS2_PLACEMENT_3D('',#7339,#7340,#7341); +#7339 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#7340 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7341 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7342 = ADVANCED_FACE('',(#7343),#7368,.F.); +#7343 = FACE_BOUND('',#7344,.F.); +#7344 = EDGE_LOOP('',(#7345,#7346,#7354,#7360,#7361,#7362)); +#7345 = ORIENTED_EDGE('',*,*,#7155,.T.); +#7346 = ORIENTED_EDGE('',*,*,#7347,.T.); +#7347 = EDGE_CURVE('',#7148,#7348,#7350,.T.); +#7348 = VERTEX_POINT('',#7349); +#7349 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#7350 = LINE('',#7351,#7352); +#7351 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#7352 = VECTOR('',#7353,1.); +#7353 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7354 = ORIENTED_EDGE('',*,*,#7355,.T.); +#7355 = EDGE_CURVE('',#7348,#7323,#7356,.T.); +#7356 = LINE('',#7357,#7358); +#7357 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#7358 = VECTOR('',#7359,1.); +#7359 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7360 = ORIENTED_EDGE('',*,*,#7332,.T.); +#7361 = ORIENTED_EDGE('',*,*,#6554,.T.); +#7362 = ORIENTED_EDGE('',*,*,#7363,.T.); +#7363 = EDGE_CURVE('',#6547,#7156,#7364,.T.); +#7364 = LINE('',#7365,#7366); +#7365 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#7366 = VECTOR('',#7367,1.); +#7367 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7368 = PLANE('',#7369); +#7369 = AXIS2_PLACEMENT_3D('',#7370,#7371,#7372); +#7370 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#7371 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7372 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7373 = ADVANCED_FACE('',(#7374),#7385,.F.); +#7374 = FACE_BOUND('',#7375,.F.); +#7375 = EDGE_LOOP('',(#7376,#7377,#7378,#7379)); +#7376 = ORIENTED_EDGE('',*,*,#7163,.T.); +#7377 = ORIENTED_EDGE('',*,*,#7363,.F.); +#7378 = ORIENTED_EDGE('',*,*,#6546,.T.); +#7379 = ORIENTED_EDGE('',*,*,#7380,.T.); +#7380 = EDGE_CURVE('',#6539,#7164,#7381,.T.); +#7381 = LINE('',#7382,#7383); +#7382 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#7383 = VECTOR('',#7384,1.); +#7384 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7385 = PLANE('',#7386); +#7386 = AXIS2_PLACEMENT_3D('',#7387,#7388,#7389); +#7387 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7388 = DIRECTION('',(0.,0.,1.)); +#7389 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7390 = ADVANCED_FACE('',(#7391),#7418,.T.); +#7391 = FACE_BOUND('',#7392,.T.); +#7392 = EDGE_LOOP('',(#7393,#7394,#7402,#7410,#7416,#7417)); +#7393 = ORIENTED_EDGE('',*,*,#7171,.T.); +#7394 = ORIENTED_EDGE('',*,*,#7395,.T.); +#7395 = EDGE_CURVE('',#7172,#7396,#7398,.T.); +#7396 = VERTEX_POINT('',#7397); +#7397 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#7398 = LINE('',#7399,#7400); +#7399 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#7400 = VECTOR('',#7401,1.); +#7401 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7402 = ORIENTED_EDGE('',*,*,#7403,.T.); +#7403 = EDGE_CURVE('',#7396,#7404,#7406,.T.); +#7404 = VERTEX_POINT('',#7405); +#7405 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#7406 = LINE('',#7407,#7408); +#7407 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#7408 = VECTOR('',#7409,1.); +#7409 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7410 = ORIENTED_EDGE('',*,*,#7411,.T.); +#7411 = EDGE_CURVE('',#7404,#6531,#7412,.T.); +#7412 = LINE('',#7413,#7414); +#7413 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#7414 = VECTOR('',#7415,1.); +#7415 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7416 = ORIENTED_EDGE('',*,*,#6538,.T.); +#7417 = ORIENTED_EDGE('',*,*,#7380,.T.); +#7418 = PLANE('',#7419); +#7419 = AXIS2_PLACEMENT_3D('',#7420,#7421,#7422); +#7420 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#7421 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7422 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7423 = ADVANCED_FACE('',(#7424),#7442,.F.); +#7424 = FACE_BOUND('',#7425,.F.); +#7425 = EDGE_LOOP('',(#7426,#7434,#7435,#7436)); +#7426 = ORIENTED_EDGE('',*,*,#7427,.T.); +#7427 = EDGE_CURVE('',#7428,#7404,#7430,.T.); +#7428 = VERTEX_POINT('',#7429); +#7429 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7430 = LINE('',#7431,#7432); +#7431 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7432 = VECTOR('',#7433,1.); +#7433 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7434 = ORIENTED_EDGE('',*,*,#7411,.T.); +#7435 = ORIENTED_EDGE('',*,*,#6530,.F.); +#7436 = ORIENTED_EDGE('',*,*,#7437,.F.); +#7437 = EDGE_CURVE('',#7428,#6523,#7438,.T.); +#7438 = LINE('',#7439,#7440); +#7439 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7440 = VECTOR('',#7441,1.); +#7441 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7442 = PLANE('',#7443); +#7443 = AXIS2_PLACEMENT_3D('',#7444,#7445,#7446); +#7444 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#7445 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7446 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7447 = ADVANCED_FACE('',(#7448),#7473,.F.); +#7448 = FACE_BOUND('',#7449,.F.); +#7449 = EDGE_LOOP('',(#7450,#7451,#7459,#7465,#7466,#7467)); +#7450 = ORIENTED_EDGE('',*,*,#7187,.T.); +#7451 = ORIENTED_EDGE('',*,*,#7452,.T.); +#7452 = EDGE_CURVE('',#7180,#7453,#7455,.T.); +#7453 = VERTEX_POINT('',#7454); +#7454 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#7455 = LINE('',#7456,#7457); +#7456 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#7457 = VECTOR('',#7458,1.); +#7458 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7459 = ORIENTED_EDGE('',*,*,#7460,.T.); +#7460 = EDGE_CURVE('',#7453,#7428,#7461,.T.); +#7461 = LINE('',#7462,#7463); +#7462 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#7463 = VECTOR('',#7464,1.); +#7464 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7465 = ORIENTED_EDGE('',*,*,#7437,.T.); +#7466 = ORIENTED_EDGE('',*,*,#6522,.T.); +#7467 = ORIENTED_EDGE('',*,*,#7468,.T.); +#7468 = EDGE_CURVE('',#6515,#7188,#7469,.T.); +#7469 = LINE('',#7470,#7471); +#7470 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#7471 = VECTOR('',#7472,1.); +#7472 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7473 = PLANE('',#7474); +#7474 = AXIS2_PLACEMENT_3D('',#7475,#7476,#7477); +#7475 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#7476 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7477 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7478 = ADVANCED_FACE('',(#7479),#7490,.F.); +#7479 = FACE_BOUND('',#7480,.F.); +#7480 = EDGE_LOOP('',(#7481,#7482,#7483,#7489)); +#7481 = ORIENTED_EDGE('',*,*,#7468,.F.); +#7482 = ORIENTED_EDGE('',*,*,#6514,.T.); +#7483 = ORIENTED_EDGE('',*,*,#7484,.T.); +#7484 = EDGE_CURVE('',#6507,#7196,#7485,.T.); +#7485 = LINE('',#7486,#7487); +#7486 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#7487 = VECTOR('',#7488,1.); +#7488 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7489 = ORIENTED_EDGE('',*,*,#7195,.T.); +#7490 = PLANE('',#7491); +#7491 = AXIS2_PLACEMENT_3D('',#7492,#7493,#7494); +#7492 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7493 = DIRECTION('',(0.,0.,1.)); +#7494 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7495 = ADVANCED_FACE('',(#7496),#7523,.T.); +#7496 = FACE_BOUND('',#7497,.T.); +#7497 = EDGE_LOOP('',(#7498,#7499,#7507,#7515,#7521,#7522)); +#7498 = ORIENTED_EDGE('',*,*,#7203,.T.); +#7499 = ORIENTED_EDGE('',*,*,#7500,.T.); +#7500 = EDGE_CURVE('',#7204,#7501,#7503,.T.); +#7501 = VERTEX_POINT('',#7502); +#7502 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#7503 = LINE('',#7504,#7505); +#7504 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#7505 = VECTOR('',#7506,1.); +#7506 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7507 = ORIENTED_EDGE('',*,*,#7508,.T.); +#7508 = EDGE_CURVE('',#7501,#7509,#7511,.T.); +#7509 = VERTEX_POINT('',#7510); +#7510 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#7511 = LINE('',#7512,#7513); +#7512 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#7513 = VECTOR('',#7514,1.); +#7514 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7515 = ORIENTED_EDGE('',*,*,#7516,.T.); +#7516 = EDGE_CURVE('',#7509,#6499,#7517,.T.); +#7517 = LINE('',#7518,#7519); +#7518 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#7519 = VECTOR('',#7520,1.); +#7520 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7521 = ORIENTED_EDGE('',*,*,#6506,.T.); +#7522 = ORIENTED_EDGE('',*,*,#7484,.T.); +#7523 = PLANE('',#7524); +#7524 = AXIS2_PLACEMENT_3D('',#7525,#7526,#7527); +#7525 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#7526 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7527 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7528 = ADVANCED_FACE('',(#7529),#7547,.F.); +#7529 = FACE_BOUND('',#7530,.F.); +#7530 = EDGE_LOOP('',(#7531,#7539,#7540,#7541)); +#7531 = ORIENTED_EDGE('',*,*,#7532,.T.); +#7532 = EDGE_CURVE('',#7533,#7509,#7535,.T.); +#7533 = VERTEX_POINT('',#7534); +#7534 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7535 = LINE('',#7536,#7537); +#7536 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7537 = VECTOR('',#7538,1.); +#7538 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7539 = ORIENTED_EDGE('',*,*,#7516,.T.); +#7540 = ORIENTED_EDGE('',*,*,#6498,.F.); +#7541 = ORIENTED_EDGE('',*,*,#7542,.F.); +#7542 = EDGE_CURVE('',#7533,#6491,#7543,.T.); +#7543 = LINE('',#7544,#7545); +#7544 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7545 = VECTOR('',#7546,1.); +#7546 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7547 = PLANE('',#7548); +#7548 = AXIS2_PLACEMENT_3D('',#7549,#7550,#7551); +#7549 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#7550 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7551 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7552 = ADVANCED_FACE('',(#7553),#7578,.F.); +#7553 = FACE_BOUND('',#7554,.F.); +#7554 = EDGE_LOOP('',(#7555,#7556,#7564,#7570,#7571,#7572)); +#7555 = ORIENTED_EDGE('',*,*,#7219,.T.); +#7556 = ORIENTED_EDGE('',*,*,#7557,.T.); +#7557 = EDGE_CURVE('',#7212,#7558,#7560,.T.); +#7558 = VERTEX_POINT('',#7559); +#7559 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#7560 = LINE('',#7561,#7562); +#7561 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#7562 = VECTOR('',#7563,1.); +#7563 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7564 = ORIENTED_EDGE('',*,*,#7565,.T.); +#7565 = EDGE_CURVE('',#7558,#7533,#7566,.T.); +#7566 = LINE('',#7567,#7568); +#7567 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#7568 = VECTOR('',#7569,1.); +#7569 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7570 = ORIENTED_EDGE('',*,*,#7542,.T.); +#7571 = ORIENTED_EDGE('',*,*,#6490,.T.); +#7572 = ORIENTED_EDGE('',*,*,#7573,.T.); +#7573 = EDGE_CURVE('',#6483,#7220,#7574,.T.); +#7574 = LINE('',#7575,#7576); +#7575 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#7576 = VECTOR('',#7577,1.); +#7577 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7578 = PLANE('',#7579); +#7579 = AXIS2_PLACEMENT_3D('',#7580,#7581,#7582); +#7580 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#7581 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7582 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7583 = ADVANCED_FACE('',(#7584),#7595,.F.); +#7584 = FACE_BOUND('',#7585,.F.); +#7585 = EDGE_LOOP('',(#7586,#7587,#7593,#7594)); +#7586 = ORIENTED_EDGE('',*,*,#6482,.T.); +#7587 = ORIENTED_EDGE('',*,*,#7588,.T.); +#7588 = EDGE_CURVE('',#6475,#7228,#7589,.T.); +#7589 = LINE('',#7590,#7591); +#7590 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#7591 = VECTOR('',#7592,1.); +#7592 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7593 = ORIENTED_EDGE('',*,*,#7227,.T.); +#7594 = ORIENTED_EDGE('',*,*,#7573,.F.); +#7595 = PLANE('',#7596); +#7596 = AXIS2_PLACEMENT_3D('',#7597,#7598,#7599); +#7597 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7598 = DIRECTION('',(0.,0.,1.)); +#7599 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7600 = ADVANCED_FACE('',(#7601),#7628,.T.); +#7601 = FACE_BOUND('',#7602,.T.); +#7602 = EDGE_LOOP('',(#7603,#7604,#7612,#7620,#7626,#7627)); +#7603 = ORIENTED_EDGE('',*,*,#7235,.T.); +#7604 = ORIENTED_EDGE('',*,*,#7605,.T.); +#7605 = EDGE_CURVE('',#7236,#7606,#7608,.T.); +#7606 = VERTEX_POINT('',#7607); +#7607 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#7608 = LINE('',#7609,#7610); +#7609 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#7610 = VECTOR('',#7611,1.); +#7611 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7612 = ORIENTED_EDGE('',*,*,#7613,.T.); +#7613 = EDGE_CURVE('',#7606,#7614,#7616,.T.); +#7614 = VERTEX_POINT('',#7615); +#7615 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#7616 = LINE('',#7617,#7618); +#7617 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#7618 = VECTOR('',#7619,1.); +#7619 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7620 = ORIENTED_EDGE('',*,*,#7621,.T.); +#7621 = EDGE_CURVE('',#7614,#6467,#7622,.T.); +#7622 = LINE('',#7623,#7624); +#7623 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#7624 = VECTOR('',#7625,1.); +#7625 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7626 = ORIENTED_EDGE('',*,*,#6474,.T.); +#7627 = ORIENTED_EDGE('',*,*,#7588,.T.); +#7628 = PLANE('',#7629); +#7629 = AXIS2_PLACEMENT_3D('',#7630,#7631,#7632); +#7630 = CARTESIAN_POINT('',(6.75,-0.515451356496,0.330008245993)); +#7631 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7632 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7633 = ADVANCED_FACE('',(#7634),#7652,.F.); +#7634 = FACE_BOUND('',#7635,.F.); +#7635 = EDGE_LOOP('',(#7636,#7644,#7645,#7646)); +#7636 = ORIENTED_EDGE('',*,*,#7637,.T.); +#7637 = EDGE_CURVE('',#7638,#7614,#7640,.T.); +#7638 = VERTEX_POINT('',#7639); +#7639 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7640 = LINE('',#7641,#7642); +#7641 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7642 = VECTOR('',#7643,1.); +#7643 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7644 = ORIENTED_EDGE('',*,*,#7621,.T.); +#7645 = ORIENTED_EDGE('',*,*,#6466,.F.); +#7646 = ORIENTED_EDGE('',*,*,#7647,.F.); +#7647 = EDGE_CURVE('',#7638,#6459,#7648,.T.); +#7648 = LINE('',#7649,#7650); +#7649 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7650 = VECTOR('',#7651,1.); +#7651 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7652 = PLANE('',#7653); +#7653 = AXIS2_PLACEMENT_3D('',#7654,#7655,#7656); +#7654 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#7655 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573)); +#7656 = DIRECTION('',(-1.190457365237E-16,-0.972082208573,0.234640533104 + )); +#7657 = ADVANCED_FACE('',(#7658),#7683,.F.); +#7658 = FACE_BOUND('',#7659,.F.); +#7659 = EDGE_LOOP('',(#7660,#7661,#7669,#7675,#7676,#7677)); +#7660 = ORIENTED_EDGE('',*,*,#7251,.T.); +#7661 = ORIENTED_EDGE('',*,*,#7662,.T.); +#7662 = EDGE_CURVE('',#7244,#7663,#7665,.T.); +#7663 = VERTEX_POINT('',#7664); +#7664 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#7665 = LINE('',#7666,#7667); +#7666 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#7667 = VECTOR('',#7668,1.); +#7668 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#7669 = ORIENTED_EDGE('',*,*,#7670,.T.); +#7670 = EDGE_CURVE('',#7663,#7638,#7671,.T.); +#7671 = LINE('',#7672,#7673); +#7672 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#7673 = VECTOR('',#7674,1.); +#7674 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7675 = ORIENTED_EDGE('',*,*,#7647,.T.); +#7676 = ORIENTED_EDGE('',*,*,#6458,.T.); +#7677 = ORIENTED_EDGE('',*,*,#7678,.T.); +#7678 = EDGE_CURVE('',#6451,#7000,#7679,.T.); +#7679 = LINE('',#7680,#7681); +#7680 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#7681 = VECTOR('',#7682,1.); +#7682 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7683 = PLANE('',#7684); +#7684 = AXIS2_PLACEMENT_3D('',#7685,#7686,#7687); +#7685 = CARTESIAN_POINT('',(8.25,-0.515451356496,0.330008245993)); +#7686 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#7687 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#7688 = ADVANCED_FACE('',(#7689),#7695,.F.); +#7689 = FACE_BOUND('',#7690,.F.); +#7690 = EDGE_LOOP('',(#7691,#7692,#7693,#7694)); +#7691 = ORIENTED_EDGE('',*,*,#6608,.T.); +#7692 = ORIENTED_EDGE('',*,*,#6999,.T.); +#7693 = ORIENTED_EDGE('',*,*,#7678,.F.); +#7694 = ORIENTED_EDGE('',*,*,#6450,.T.); +#7695 = PLANE('',#7696); +#7696 = AXIS2_PLACEMENT_3D('',#7697,#7698,#7699); +#7697 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#7698 = DIRECTION('',(0.,0.,1.)); +#7699 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7700 = ADVANCED_FACE('',(#7701),#7728,.F.); +#7701 = FACE_BOUND('',#7702,.F.); +#7702 = EDGE_LOOP('',(#7703,#7704,#7705,#7706,#7712,#7713,#7722)); +#7703 = ORIENTED_EDGE('',*,*,#6683,.T.); +#7704 = ORIENTED_EDGE('',*,*,#6594,.F.); +#7705 = ORIENTED_EDGE('',*,*,#7274,.T.); +#7706 = ORIENTED_EDGE('',*,*,#7707,.T.); +#7707 = EDGE_CURVE('',#7267,#6946,#7708,.T.); +#7708 = LINE('',#7709,#7710); +#7709 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#7710 = VECTOR('',#7711,1.); +#7711 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7712 = ORIENTED_EDGE('',*,*,#6953,.F.); +#7713 = ORIENTED_EDGE('',*,*,#7714,.F.); +#7714 = EDGE_CURVE('',#7715,#6954,#7717,.T.); +#7715 = VERTEX_POINT('',#7716); +#7716 = CARTESIAN_POINT('',(9.1,1.,3.65)); +#7717 = CIRCLE('',#7718,0.5); +#7718 = AXIS2_PLACEMENT_3D('',#7719,#7720,#7721); +#7719 = CARTESIAN_POINT('',(9.1,1.,4.15)); +#7720 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7721 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7722 = ORIENTED_EDGE('',*,*,#7723,.T.); +#7723 = EDGE_CURVE('',#7715,#6676,#7724,.T.); +#7724 = LINE('',#7725,#7726); +#7725 = CARTESIAN_POINT('',(9.1,-0.825,3.65)); +#7726 = VECTOR('',#7727,1.); +#7727 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7728 = PLANE('',#7729); +#7729 = AXIS2_PLACEMENT_3D('',#7730,#7731,#7732); +#7730 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#7731 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7732 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7733 = ADVANCED_FACE('',(#7734),#7745,.T.); +#7734 = FACE_BOUND('',#7735,.T.); +#7735 = EDGE_LOOP('',(#7736,#7737,#7738,#7739)); +#7736 = ORIENTED_EDGE('',*,*,#6806,.F.); +#7737 = ORIENTED_EDGE('',*,*,#6651,.T.); +#7738 = ORIENTED_EDGE('',*,*,#7008,.T.); +#7739 = ORIENTED_EDGE('',*,*,#7740,.T.); +#7740 = EDGE_CURVE('',#7009,#6807,#7741,.T.); +#7741 = LINE('',#7742,#7743); +#7742 = CARTESIAN_POINT('',(8.,2.35,7.)); +#7743 = VECTOR('',#7744,1.); +#7744 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7745 = PLANE('',#7746); +#7746 = AXIS2_PLACEMENT_3D('',#7747,#7748,#7749); +#7747 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#7748 = DIRECTION('',(0.,0.,1.)); +#7749 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7750 = ADVANCED_FACE('',(#7751),#7762,.F.); +#7751 = FACE_BOUND('',#7752,.F.); +#7752 = EDGE_LOOP('',(#7753,#7759,#7760,#7761)); +#7753 = ORIENTED_EDGE('',*,*,#7754,.T.); +#7754 = EDGE_CURVE('',#6627,#7715,#7755,.T.); +#7755 = LINE('',#7756,#7757); +#7756 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#7757 = VECTOR('',#7758,1.); +#7758 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7759 = ORIENTED_EDGE('',*,*,#7714,.T.); +#7760 = ORIENTED_EDGE('',*,*,#6961,.F.); +#7761 = ORIENTED_EDGE('',*,*,#6634,.T.); +#7762 = CYLINDRICAL_SURFACE('',#7763,0.5); +#7763 = AXIS2_PLACEMENT_3D('',#7764,#7765,#7766); +#7764 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#7765 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#7766 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#7767 = ADVANCED_FACE('',(#7768),#7774,.T.); +#7768 = FACE_BOUND('',#7769,.T.); +#7769 = EDGE_LOOP('',(#7770,#7771,#7772,#7773)); +#7770 = ORIENTED_EDGE('',*,*,#6626,.F.); +#7771 = ORIENTED_EDGE('',*,*,#7754,.T.); +#7772 = ORIENTED_EDGE('',*,*,#7723,.T.); +#7773 = ORIENTED_EDGE('',*,*,#6675,.F.); +#7774 = PLANE('',#7775); +#7775 = AXIS2_PLACEMENT_3D('',#7776,#7777,#7778); +#7776 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#7777 = DIRECTION('',(0.,0.,1.)); +#7778 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7779 = ADVANCED_FACE('',(#7780,#7786,#7820,#7854,#7888),#7922,.T.); +#7780 = FACE_BOUND('',#7781,.T.); +#7781 = EDGE_LOOP('',(#7782,#7783,#7784,#7785)); +#7782 = ORIENTED_EDGE('',*,*,#6945,.T.); +#7783 = ORIENTED_EDGE('',*,*,#6724,.T.); +#7784 = ORIENTED_EDGE('',*,*,#7266,.T.); +#7785 = ORIENTED_EDGE('',*,*,#7707,.T.); +#7786 = FACE_BOUND('',#7787,.T.); +#7787 = EDGE_LOOP('',(#7788,#7798,#7806,#7814)); +#7788 = ORIENTED_EDGE('',*,*,#7789,.F.); +#7789 = EDGE_CURVE('',#7790,#7792,#7794,.T.); +#7790 = VERTEX_POINT('',#7791); +#7791 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#7792 = VERTEX_POINT('',#7793); +#7793 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#7794 = LINE('',#7795,#7796); +#7795 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#7796 = VECTOR('',#7797,1.); +#7797 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7798 = ORIENTED_EDGE('',*,*,#7799,.T.); +#7799 = EDGE_CURVE('',#7790,#7800,#7802,.T.); +#7800 = VERTEX_POINT('',#7801); +#7801 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#7802 = LINE('',#7803,#7804); +#7803 = CARTESIAN_POINT('',(2.035,0.32,1.85)); +#7804 = VECTOR('',#7805,1.); +#7805 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7806 = ORIENTED_EDGE('',*,*,#7807,.T.); +#7807 = EDGE_CURVE('',#7800,#7808,#7810,.T.); +#7808 = VERTEX_POINT('',#7809); +#7809 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#7810 = LINE('',#7811,#7812); +#7811 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#7812 = VECTOR('',#7813,1.); +#7813 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7814 = ORIENTED_EDGE('',*,*,#7815,.T.); +#7815 = EDGE_CURVE('',#7808,#7792,#7816,.T.); +#7816 = LINE('',#7817,#7818); +#7817 = CARTESIAN_POINT('',(2.035,-0.32,1.85)); +#7818 = VECTOR('',#7819,1.); +#7819 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7820 = FACE_BOUND('',#7821,.T.); +#7821 = EDGE_LOOP('',(#7822,#7832,#7840,#7848)); +#7822 = ORIENTED_EDGE('',*,*,#7823,.T.); +#7823 = EDGE_CURVE('',#7824,#7826,#7828,.T.); +#7824 = VERTEX_POINT('',#7825); +#7825 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#7826 = VERTEX_POINT('',#7827); +#7827 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#7828 = LINE('',#7829,#7830); +#7829 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#7830 = VECTOR('',#7831,1.); +#7831 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7832 = ORIENTED_EDGE('',*,*,#7833,.T.); +#7833 = EDGE_CURVE('',#7826,#7834,#7836,.T.); +#7834 = VERTEX_POINT('',#7835); +#7835 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#7836 = LINE('',#7837,#7838); +#7837 = CARTESIAN_POINT('',(3.285,-0.32,1.85)); +#7838 = VECTOR('',#7839,1.); +#7839 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7840 = ORIENTED_EDGE('',*,*,#7841,.F.); +#7841 = EDGE_CURVE('',#7842,#7834,#7844,.T.); +#7842 = VERTEX_POINT('',#7843); +#7843 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#7844 = LINE('',#7845,#7846); +#7845 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#7846 = VECTOR('',#7847,1.); +#7847 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7848 = ORIENTED_EDGE('',*,*,#7849,.T.); +#7849 = EDGE_CURVE('',#7842,#7824,#7850,.T.); +#7850 = LINE('',#7851,#7852); +#7851 = CARTESIAN_POINT('',(3.285,0.32,1.85)); +#7852 = VECTOR('',#7853,1.); +#7853 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7854 = FACE_BOUND('',#7855,.T.); +#7855 = EDGE_LOOP('',(#7856,#7866,#7874,#7882)); +#7856 = ORIENTED_EDGE('',*,*,#7857,.F.); +#7857 = EDGE_CURVE('',#7858,#7860,#7862,.T.); +#7858 = VERTEX_POINT('',#7859); +#7859 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#7860 = VERTEX_POINT('',#7861); +#7861 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#7862 = LINE('',#7863,#7864); +#7863 = CARTESIAN_POINT('',(4.68,-0.2875,1.85)); +#7864 = VECTOR('',#7865,1.); +#7865 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7866 = ORIENTED_EDGE('',*,*,#7867,.T.); +#7867 = EDGE_CURVE('',#7858,#7868,#7870,.T.); +#7868 = VERTEX_POINT('',#7869); +#7869 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#7870 = LINE('',#7871,#7872); +#7871 = CARTESIAN_POINT('',(4.535,0.32,1.85)); +#7872 = VECTOR('',#7873,1.); +#7873 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7874 = ORIENTED_EDGE('',*,*,#7875,.T.); +#7875 = EDGE_CURVE('',#7868,#7876,#7878,.T.); +#7876 = VERTEX_POINT('',#7877); +#7877 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#7878 = LINE('',#7879,#7880); +#7879 = CARTESIAN_POINT('',(5.32,-0.2875,1.85)); +#7880 = VECTOR('',#7881,1.); +#7881 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7882 = ORIENTED_EDGE('',*,*,#7883,.T.); +#7883 = EDGE_CURVE('',#7876,#7860,#7884,.T.); +#7884 = LINE('',#7885,#7886); +#7885 = CARTESIAN_POINT('',(4.535,-0.32,1.85)); +#7886 = VECTOR('',#7887,1.); +#7887 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7888 = FACE_BOUND('',#7889,.T.); +#7889 = EDGE_LOOP('',(#7890,#7900,#7908,#7916)); +#7890 = ORIENTED_EDGE('',*,*,#7891,.T.); +#7891 = EDGE_CURVE('',#7892,#7894,#7896,.T.); +#7892 = VERTEX_POINT('',#7893); +#7893 = CARTESIAN_POINT('',(7.18,0.32,1.85)); +#7894 = VERTEX_POINT('',#7895); +#7895 = CARTESIAN_POINT('',(7.82,0.32,1.85)); +#7896 = LINE('',#7897,#7898); +#7897 = CARTESIAN_POINT('',(5.785,0.32,1.85)); +#7898 = VECTOR('',#7899,1.); +#7899 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#7900 = ORIENTED_EDGE('',*,*,#7901,.T.); +#7901 = EDGE_CURVE('',#7894,#7902,#7904,.T.); +#7902 = VERTEX_POINT('',#7903); +#7903 = CARTESIAN_POINT('',(7.82,-0.32,1.85)); +#7904 = LINE('',#7905,#7906); +#7905 = CARTESIAN_POINT('',(7.82,-0.26920299558,1.85)); +#7906 = VECTOR('',#7907,1.); +#7907 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7908 = ORIENTED_EDGE('',*,*,#7909,.T.); +#7909 = EDGE_CURVE('',#7902,#7910,#7912,.T.); +#7910 = VERTEX_POINT('',#7911); +#7911 = CARTESIAN_POINT('',(7.18,-0.32,1.85)); +#7912 = LINE('',#7913,#7914); +#7913 = CARTESIAN_POINT('',(5.785,-0.32,1.85)); +#7914 = VECTOR('',#7915,1.); +#7915 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7916 = ORIENTED_EDGE('',*,*,#7917,.F.); +#7917 = EDGE_CURVE('',#7892,#7910,#7918,.T.); +#7918 = LINE('',#7919,#7920); +#7919 = CARTESIAN_POINT('',(7.18,-0.26920299558,1.85)); +#7920 = VECTOR('',#7921,1.); +#7921 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7922 = PLANE('',#7923); +#7923 = AXIS2_PLACEMENT_3D('',#7924,#7925,#7926); +#7924 = CARTESIAN_POINT('',(3.75,-0.575,1.85)); +#7925 = DIRECTION('',(0.,0.,1.)); +#7926 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7927 = ADVANCED_FACE('',(#7928),#7939,.F.); +#7928 = FACE_BOUND('',#7929,.F.); +#7929 = EDGE_LOOP('',(#7930,#7931,#7937,#7938)); +#7930 = ORIENTED_EDGE('',*,*,#7130,.F.); +#7931 = ORIENTED_EDGE('',*,*,#7932,.T.); +#7932 = EDGE_CURVE('',#7123,#6921,#7933,.T.); +#7933 = LINE('',#7934,#7935); +#7934 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7935 = VECTOR('',#7936,1.); +#7936 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7937 = ORIENTED_EDGE('',*,*,#6928,.F.); +#7938 = ORIENTED_EDGE('',*,*,#6976,.F.); +#7939 = PLANE('',#7940); +#7940 = AXIS2_PLACEMENT_3D('',#7941,#7942,#7943); +#7941 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#7942 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7943 = DIRECTION('',(0.,0.,1.)); +#7944 = ADVANCED_FACE('',(#7945),#7956,.F.); +#7945 = FACE_BOUND('',#7946,.F.); +#7946 = EDGE_LOOP('',(#7947,#7948,#7954,#7955)); +#7947 = ORIENTED_EDGE('',*,*,#7122,.F.); +#7948 = ORIENTED_EDGE('',*,*,#7949,.T.); +#7949 = EDGE_CURVE('',#7115,#6913,#7950,.T.); +#7950 = LINE('',#7951,#7952); +#7951 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7952 = VECTOR('',#7953,1.); +#7953 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7954 = ORIENTED_EDGE('',*,*,#6920,.F.); +#7955 = ORIENTED_EDGE('',*,*,#7932,.F.); +#7956 = PLANE('',#7957); +#7957 = AXIS2_PLACEMENT_3D('',#7958,#7959,#7960); +#7958 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#7959 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#7960 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7961 = ADVANCED_FACE('',(#7962),#7973,.F.); +#7962 = FACE_BOUND('',#7963,.F.); +#7963 = EDGE_LOOP('',(#7964,#7965,#7971,#7972)); +#7964 = ORIENTED_EDGE('',*,*,#7114,.F.); +#7965 = ORIENTED_EDGE('',*,*,#7966,.T.); +#7966 = EDGE_CURVE('',#7107,#6905,#7967,.T.); +#7967 = LINE('',#7968,#7969); +#7968 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7969 = VECTOR('',#7970,1.); +#7970 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7971 = ORIENTED_EDGE('',*,*,#6912,.F.); +#7972 = ORIENTED_EDGE('',*,*,#7949,.F.); +#7973 = PLANE('',#7974); +#7974 = AXIS2_PLACEMENT_3D('',#7975,#7976,#7977); +#7975 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#7976 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#7977 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#7978 = ADVANCED_FACE('',(#7979),#7990,.F.); +#7979 = FACE_BOUND('',#7980,.F.); +#7980 = EDGE_LOOP('',(#7981,#7982,#7988,#7989)); +#7981 = ORIENTED_EDGE('',*,*,#7106,.F.); +#7982 = ORIENTED_EDGE('',*,*,#7983,.T.); +#7983 = EDGE_CURVE('',#7098,#6896,#7984,.T.); +#7984 = LINE('',#7985,#7986); +#7985 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#7986 = VECTOR('',#7987,1.); +#7987 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#7988 = ORIENTED_EDGE('',*,*,#6904,.F.); +#7989 = ORIENTED_EDGE('',*,*,#7966,.F.); +#7990 = PLANE('',#7991); +#7991 = AXIS2_PLACEMENT_3D('',#7992,#7993,#7994); +#7992 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#7993 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#7994 = DIRECTION('',(0.,0.,1.)); +#7995 = ADVANCED_FACE('',(#7996),#8007,.F.); +#7996 = FACE_BOUND('',#7997,.F.); +#7997 = EDGE_LOOP('',(#7998,#7999,#8000,#8001)); +#7998 = ORIENTED_EDGE('',*,*,#6895,.F.); +#7999 = ORIENTED_EDGE('',*,*,#7983,.F.); +#8000 = ORIENTED_EDGE('',*,*,#7097,.F.); +#8001 = ORIENTED_EDGE('',*,*,#8002,.T.); +#8002 = EDGE_CURVE('',#7090,#6888,#8003,.T.); +#8003 = LINE('',#8004,#8005); +#8004 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#8005 = VECTOR('',#8006,1.); +#8006 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8007 = CYLINDRICAL_SURFACE('',#8008,0.75); +#8008 = AXIS2_PLACEMENT_3D('',#8009,#8010,#8011); +#8009 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#8010 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8011 = DIRECTION('',(-0.,0.,-1.)); +#8012 = ADVANCED_FACE('',(#8013),#8024,.F.); +#8013 = FACE_BOUND('',#8014,.F.); +#8014 = EDGE_LOOP('',(#8015,#8016,#8017,#8023)); +#8015 = ORIENTED_EDGE('',*,*,#8002,.F.); +#8016 = ORIENTED_EDGE('',*,*,#7089,.F.); +#8017 = ORIENTED_EDGE('',*,*,#8018,.T.); +#8018 = EDGE_CURVE('',#7082,#6880,#8019,.T.); +#8019 = LINE('',#8020,#8021); +#8020 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#8021 = VECTOR('',#8022,1.); +#8022 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8023 = ORIENTED_EDGE('',*,*,#6887,.F.); +#8024 = PLANE('',#8025); +#8025 = AXIS2_PLACEMENT_3D('',#8026,#8027,#8028); +#8026 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#8027 = DIRECTION('',(-0.,0.,-1.)); +#8028 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8029 = ADVANCED_FACE('',(#8030),#8041,.F.); +#8030 = FACE_BOUND('',#8031,.F.); +#8031 = EDGE_LOOP('',(#8032,#8033,#8039,#8040)); +#8032 = ORIENTED_EDGE('',*,*,#7081,.F.); +#8033 = ORIENTED_EDGE('',*,*,#8034,.T.); +#8034 = EDGE_CURVE('',#7074,#6872,#8035,.T.); +#8035 = LINE('',#8036,#8037); +#8036 = CARTESIAN_POINT('',(1.,2.35,7.)); +#8037 = VECTOR('',#8038,1.); +#8038 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8039 = ORIENTED_EDGE('',*,*,#6879,.F.); +#8040 = ORIENTED_EDGE('',*,*,#8018,.F.); +#8041 = PLANE('',#8042); +#8042 = AXIS2_PLACEMENT_3D('',#8043,#8044,#8045); +#8043 = CARTESIAN_POINT('',(1.,2.35,7.)); +#8044 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8045 = DIRECTION('',(0.,-0.,-1.)); +#8046 = ADVANCED_FACE('',(#8047),#8058,.T.); +#8047 = FACE_BOUND('',#8048,.T.); +#8048 = EDGE_LOOP('',(#8049,#8050,#8056,#8057)); +#8049 = ORIENTED_EDGE('',*,*,#6871,.F.); +#8050 = ORIENTED_EDGE('',*,*,#8051,.F.); +#8051 = EDGE_CURVE('',#7066,#6864,#8052,.T.); +#8052 = LINE('',#8053,#8054); +#8053 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#8054 = VECTOR('',#8055,1.); +#8055 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8056 = ORIENTED_EDGE('',*,*,#7073,.T.); +#8057 = ORIENTED_EDGE('',*,*,#8034,.T.); +#8058 = PLANE('',#8059); +#8059 = AXIS2_PLACEMENT_3D('',#8060,#8061,#8062); +#8060 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#8061 = DIRECTION('',(0.,0.,1.)); +#8062 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8063 = ADVANCED_FACE('',(#8064),#8075,.T.); +#8064 = FACE_BOUND('',#8065,.T.); +#8065 = EDGE_LOOP('',(#8066,#8067,#8068,#8069)); +#8066 = ORIENTED_EDGE('',*,*,#7065,.F.); +#8067 = ORIENTED_EDGE('',*,*,#8051,.T.); +#8068 = ORIENTED_EDGE('',*,*,#6863,.F.); +#8069 = ORIENTED_EDGE('',*,*,#8070,.F.); +#8070 = EDGE_CURVE('',#7058,#6856,#8071,.T.); +#8071 = LINE('',#8072,#8073); +#8072 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#8073 = VECTOR('',#8074,1.); +#8074 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8075 = PLANE('',#8076); +#8076 = AXIS2_PLACEMENT_3D('',#8077,#8078,#8079); +#8077 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#8078 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8079 = DIRECTION('',(0.,-0.,-1.)); +#8080 = ADVANCED_FACE('',(#8081),#8092,.T.); +#8081 = FACE_BOUND('',#8082,.T.); +#8082 = EDGE_LOOP('',(#8083,#8089,#8090,#8091)); +#8083 = ORIENTED_EDGE('',*,*,#8084,.F.); +#8084 = EDGE_CURVE('',#7049,#6847,#8085,.T.); +#8085 = LINE('',#8086,#8087); +#8086 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#8087 = VECTOR('',#8088,1.); +#8088 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8089 = ORIENTED_EDGE('',*,*,#7057,.F.); +#8090 = ORIENTED_EDGE('',*,*,#8070,.T.); +#8091 = ORIENTED_EDGE('',*,*,#6855,.F.); +#8092 = PLANE('',#8093); +#8093 = AXIS2_PLACEMENT_3D('',#8094,#8095,#8096); +#8094 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#8095 = DIRECTION('',(0.,0.,1.)); +#8096 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8097 = ADVANCED_FACE('',(#8098),#8109,.F.); +#8098 = FACE_BOUND('',#8099,.F.); +#8099 = EDGE_LOOP('',(#8100,#8101,#8102,#8108)); +#8100 = ORIENTED_EDGE('',*,*,#8084,.F.); +#8101 = ORIENTED_EDGE('',*,*,#7048,.T.); +#8102 = ORIENTED_EDGE('',*,*,#8103,.T.); +#8103 = EDGE_CURVE('',#7041,#6839,#8104,.T.); +#8104 = LINE('',#8105,#8106); +#8105 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#8106 = VECTOR('',#8107,1.); +#8107 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8108 = ORIENTED_EDGE('',*,*,#6846,.F.); +#8109 = CYLINDRICAL_SURFACE('',#8110,0.75); +#8110 = AXIS2_PLACEMENT_3D('',#8111,#8112,#8113); +#8111 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#8112 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8113 = DIRECTION('',(0.,-0.,-1.)); +#8114 = ADVANCED_FACE('',(#8115),#8126,.T.); +#8115 = FACE_BOUND('',#8116,.T.); +#8116 = EDGE_LOOP('',(#8117,#8118,#8119,#8120)); +#8117 = ORIENTED_EDGE('',*,*,#7040,.F.); +#8118 = ORIENTED_EDGE('',*,*,#8103,.T.); +#8119 = ORIENTED_EDGE('',*,*,#6838,.F.); +#8120 = ORIENTED_EDGE('',*,*,#8121,.F.); +#8121 = EDGE_CURVE('',#7033,#6831,#8122,.T.); +#8122 = LINE('',#8123,#8124); +#8123 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#8124 = VECTOR('',#8125,1.); +#8125 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8126 = PLANE('',#8127); +#8127 = AXIS2_PLACEMENT_3D('',#8128,#8129,#8130); +#8128 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#8129 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8130 = DIRECTION('',(0.,0.,1.)); +#8131 = ADVANCED_FACE('',(#8132),#8143,.T.); +#8132 = FACE_BOUND('',#8133,.T.); +#8133 = EDGE_LOOP('',(#8134,#8135,#8136,#8137)); +#8134 = ORIENTED_EDGE('',*,*,#7032,.F.); +#8135 = ORIENTED_EDGE('',*,*,#8121,.T.); +#8136 = ORIENTED_EDGE('',*,*,#6830,.F.); +#8137 = ORIENTED_EDGE('',*,*,#8138,.F.); +#8138 = EDGE_CURVE('',#7025,#6823,#8139,.T.); +#8139 = LINE('',#8140,#8141); +#8140 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#8141 = VECTOR('',#8142,1.); +#8142 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8143 = PLANE('',#8144); +#8144 = AXIS2_PLACEMENT_3D('',#8145,#8146,#8147); +#8145 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#8146 = DIRECTION('',(-0.707106781187,8.659560562349E-17,-0.707106781187 + )); +#8147 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#8148 = ADVANCED_FACE('',(#8149),#8160,.T.); +#8149 = FACE_BOUND('',#8150,.T.); +#8150 = EDGE_LOOP('',(#8151,#8152,#8153,#8154)); +#8151 = ORIENTED_EDGE('',*,*,#7024,.F.); +#8152 = ORIENTED_EDGE('',*,*,#8138,.T.); +#8153 = ORIENTED_EDGE('',*,*,#6822,.F.); +#8154 = ORIENTED_EDGE('',*,*,#8155,.F.); +#8155 = EDGE_CURVE('',#7017,#6815,#8156,.T.); +#8156 = LINE('',#8157,#8158); +#8157 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#8158 = VECTOR('',#8159,1.); +#8159 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8160 = PLANE('',#8161); +#8161 = AXIS2_PLACEMENT_3D('',#8162,#8163,#8164); +#8162 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#8163 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187) + ); +#8164 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187) + ); +#8165 = ADVANCED_FACE('',(#8166),#8172,.T.); +#8166 = FACE_BOUND('',#8167,.T.); +#8167 = EDGE_LOOP('',(#8168,#8169,#8170,#8171)); +#8168 = ORIENTED_EDGE('',*,*,#7016,.F.); +#8169 = ORIENTED_EDGE('',*,*,#8155,.T.); +#8170 = ORIENTED_EDGE('',*,*,#6814,.F.); +#8171 = ORIENTED_EDGE('',*,*,#7740,.F.); +#8172 = PLANE('',#8173); +#8173 = AXIS2_PLACEMENT_3D('',#8174,#8175,#8176); +#8174 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#8175 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8176 = DIRECTION('',(0.,0.,1.)); +#8177 = ADVANCED_FACE('',(#8178),#8189,.F.); +#8178 = FACE_BOUND('',#8179,.F.); +#8179 = EDGE_LOOP('',(#8180,#8181,#8182,#8188)); +#8180 = ORIENTED_EDGE('',*,*,#7243,.T.); +#8181 = ORIENTED_EDGE('',*,*,#7605,.T.); +#8182 = ORIENTED_EDGE('',*,*,#8183,.F.); +#8183 = EDGE_CURVE('',#7663,#7606,#8184,.T.); +#8184 = LINE('',#8185,#8186); +#8185 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#8186 = VECTOR('',#8187,1.); +#8187 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8188 = ORIENTED_EDGE('',*,*,#7662,.F.); +#8189 = PLANE('',#8190); +#8190 = AXIS2_PLACEMENT_3D('',#8191,#8192,#8193); +#8191 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#8192 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8193 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8194 = ADVANCED_FACE('',(#8195),#8206,.F.); +#8195 = FACE_BOUND('',#8196,.F.); +#8196 = EDGE_LOOP('',(#8197,#8198,#8199,#8205)); +#8197 = ORIENTED_EDGE('',*,*,#7211,.T.); +#8198 = ORIENTED_EDGE('',*,*,#7500,.T.); +#8199 = ORIENTED_EDGE('',*,*,#8200,.F.); +#8200 = EDGE_CURVE('',#7558,#7501,#8201,.T.); +#8201 = LINE('',#8202,#8203); +#8202 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#8203 = VECTOR('',#8204,1.); +#8204 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8205 = ORIENTED_EDGE('',*,*,#7557,.F.); +#8206 = PLANE('',#8207); +#8207 = AXIS2_PLACEMENT_3D('',#8208,#8209,#8210); +#8208 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#8209 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8210 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8211 = ADVANCED_FACE('',(#8212),#8223,.F.); +#8212 = FACE_BOUND('',#8213,.F.); +#8213 = EDGE_LOOP('',(#8214,#8215,#8216,#8222)); +#8214 = ORIENTED_EDGE('',*,*,#7179,.T.); +#8215 = ORIENTED_EDGE('',*,*,#7395,.T.); +#8216 = ORIENTED_EDGE('',*,*,#8217,.F.); +#8217 = EDGE_CURVE('',#7453,#7396,#8218,.T.); +#8218 = LINE('',#8219,#8220); +#8219 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#8220 = VECTOR('',#8221,1.); +#8221 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8222 = ORIENTED_EDGE('',*,*,#7452,.F.); +#8223 = PLANE('',#8224); +#8224 = AXIS2_PLACEMENT_3D('',#8225,#8226,#8227); +#8225 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#8226 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8227 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8228 = ADVANCED_FACE('',(#8229),#8240,.F.); +#8229 = FACE_BOUND('',#8230,.F.); +#8230 = EDGE_LOOP('',(#8231,#8232,#8233,#8239)); +#8231 = ORIENTED_EDGE('',*,*,#7147,.T.); +#8232 = ORIENTED_EDGE('',*,*,#7290,.T.); +#8233 = ORIENTED_EDGE('',*,*,#8234,.F.); +#8234 = EDGE_CURVE('',#7348,#7291,#8235,.T.); +#8235 = LINE('',#8236,#8237); +#8236 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#8237 = VECTOR('',#8238,1.); +#8238 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8239 = ORIENTED_EDGE('',*,*,#7347,.F.); +#8240 = PLANE('',#8241); +#8241 = AXIS2_PLACEMENT_3D('',#8242,#8243,#8244); +#8242 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#8243 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456) + ); +#8244 = DIRECTION('',(-1.14539532148E-16,-0.935286257456,-0.353892097416 + )); +#8245 = ADVANCED_FACE('',(#8246,#8252),#8286,.F.); +#8246 = FACE_BOUND('',#8247,.F.); +#8247 = EDGE_LOOP('',(#8248,#8249,#8250,#8251)); +#8248 = ORIENTED_EDGE('',*,*,#8234,.T.); +#8249 = ORIENTED_EDGE('',*,*,#7298,.T.); +#8250 = ORIENTED_EDGE('',*,*,#7322,.F.); +#8251 = ORIENTED_EDGE('',*,*,#7355,.F.); +#8252 = FACE_BOUND('',#8253,.F.); +#8253 = EDGE_LOOP('',(#8254,#8264,#8272,#8280)); +#8254 = ORIENTED_EDGE('',*,*,#8255,.F.); +#8255 = EDGE_CURVE('',#8256,#8258,#8260,.T.); +#8256 = VERTEX_POINT('',#8257); +#8257 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#8258 = VERTEX_POINT('',#8259); +#8259 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#8260 = LINE('',#8261,#8262); +#8261 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#8262 = VECTOR('',#8263,1.); +#8263 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8264 = ORIENTED_EDGE('',*,*,#8265,.T.); +#8265 = EDGE_CURVE('',#8256,#8266,#8268,.T.); +#8266 = VERTEX_POINT('',#8267); +#8267 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#8268 = LINE('',#8269,#8270); +#8269 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#8270 = VECTOR('',#8271,1.); +#8271 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8272 = ORIENTED_EDGE('',*,*,#8273,.T.); +#8273 = EDGE_CURVE('',#8266,#8274,#8276,.T.); +#8274 = VERTEX_POINT('',#8275); +#8275 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#8276 = LINE('',#8277,#8278); +#8277 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#8278 = VECTOR('',#8279,1.); +#8279 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8280 = ORIENTED_EDGE('',*,*,#8281,.T.); +#8281 = EDGE_CURVE('',#8274,#8258,#8282,.T.); +#8282 = LINE('',#8283,#8284); +#8283 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#8284 = VECTOR('',#8285,1.); +#8285 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8286 = PLANE('',#8287); +#8287 = AXIS2_PLACEMENT_3D('',#8288,#8289,#8290); +#8288 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#8289 = DIRECTION('',(0.,0.,1.)); +#8290 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8291 = ADVANCED_FACE('',(#8292,#8298),#8332,.F.); +#8292 = FACE_BOUND('',#8293,.F.); +#8293 = EDGE_LOOP('',(#8294,#8295,#8296,#8297)); +#8294 = ORIENTED_EDGE('',*,*,#8217,.T.); +#8295 = ORIENTED_EDGE('',*,*,#7403,.T.); +#8296 = ORIENTED_EDGE('',*,*,#7427,.F.); +#8297 = ORIENTED_EDGE('',*,*,#7460,.F.); +#8298 = FACE_BOUND('',#8299,.F.); +#8299 = EDGE_LOOP('',(#8300,#8310,#8318,#8326)); +#8300 = ORIENTED_EDGE('',*,*,#8301,.T.); +#8301 = EDGE_CURVE('',#8302,#8304,#8306,.T.); +#8302 = VERTEX_POINT('',#8303); +#8303 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#8304 = VERTEX_POINT('',#8305); +#8305 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#8306 = LINE('',#8307,#8308); +#8307 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#8308 = VECTOR('',#8309,1.); +#8309 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8310 = ORIENTED_EDGE('',*,*,#8311,.T.); +#8311 = EDGE_CURVE('',#8304,#8312,#8314,.T.); +#8312 = VERTEX_POINT('',#8313); +#8313 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#8314 = LINE('',#8315,#8316); +#8315 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#8316 = VECTOR('',#8317,1.); +#8317 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8318 = ORIENTED_EDGE('',*,*,#8319,.F.); +#8319 = EDGE_CURVE('',#8320,#8312,#8322,.T.); +#8320 = VERTEX_POINT('',#8321); +#8321 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#8322 = LINE('',#8323,#8324); +#8323 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#8324 = VECTOR('',#8325,1.); +#8325 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8326 = ORIENTED_EDGE('',*,*,#8327,.T.); +#8327 = EDGE_CURVE('',#8320,#8302,#8328,.T.); +#8328 = LINE('',#8329,#8330); +#8329 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#8330 = VECTOR('',#8331,1.); +#8331 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8332 = PLANE('',#8333); +#8333 = AXIS2_PLACEMENT_3D('',#8334,#8335,#8336); +#8334 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#8335 = DIRECTION('',(0.,0.,1.)); +#8336 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8337 = ADVANCED_FACE('',(#8338,#8344),#8378,.F.); +#8338 = FACE_BOUND('',#8339,.F.); +#8339 = EDGE_LOOP('',(#8340,#8341,#8342,#8343)); +#8340 = ORIENTED_EDGE('',*,*,#8200,.T.); +#8341 = ORIENTED_EDGE('',*,*,#7508,.T.); +#8342 = ORIENTED_EDGE('',*,*,#7532,.F.); +#8343 = ORIENTED_EDGE('',*,*,#7565,.F.); +#8344 = FACE_BOUND('',#8345,.F.); +#8345 = EDGE_LOOP('',(#8346,#8356,#8364,#8372)); +#8346 = ORIENTED_EDGE('',*,*,#8347,.F.); +#8347 = EDGE_CURVE('',#8348,#8350,#8352,.T.); +#8348 = VERTEX_POINT('',#8349); +#8349 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#8350 = VERTEX_POINT('',#8351); +#8351 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#8352 = LINE('',#8353,#8354); +#8353 = CARTESIAN_POINT('',(4.68,0.25,0.3)); +#8354 = VECTOR('',#8355,1.); +#8355 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8356 = ORIENTED_EDGE('',*,*,#8357,.T.); +#8357 = EDGE_CURVE('',#8348,#8358,#8360,.T.); +#8358 = VERTEX_POINT('',#8359); +#8359 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#8360 = LINE('',#8361,#8362); +#8361 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#8362 = VECTOR('',#8363,1.); +#8363 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8364 = ORIENTED_EDGE('',*,*,#8365,.T.); +#8365 = EDGE_CURVE('',#8358,#8366,#8368,.T.); +#8366 = VERTEX_POINT('',#8367); +#8367 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#8368 = LINE('',#8369,#8370); +#8369 = CARTESIAN_POINT('',(5.32,0.25,0.3)); +#8370 = VECTOR('',#8371,1.); +#8371 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8372 = ORIENTED_EDGE('',*,*,#8373,.T.); +#8373 = EDGE_CURVE('',#8366,#8350,#8374,.T.); +#8374 = LINE('',#8375,#8376); +#8375 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#8376 = VECTOR('',#8377,1.); +#8377 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8378 = PLANE('',#8379); +#8379 = AXIS2_PLACEMENT_3D('',#8380,#8381,#8382); +#8380 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#8381 = DIRECTION('',(0.,0.,1.)); +#8382 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8383 = ADVANCED_FACE('',(#8384,#8390),#8424,.F.); +#8384 = FACE_BOUND('',#8385,.F.); +#8385 = EDGE_LOOP('',(#8386,#8387,#8388,#8389)); +#8386 = ORIENTED_EDGE('',*,*,#8183,.T.); +#8387 = ORIENTED_EDGE('',*,*,#7613,.T.); +#8388 = ORIENTED_EDGE('',*,*,#7637,.F.); +#8389 = ORIENTED_EDGE('',*,*,#7670,.F.); +#8390 = FACE_BOUND('',#8391,.F.); +#8391 = EDGE_LOOP('',(#8392,#8402,#8410,#8418)); +#8392 = ORIENTED_EDGE('',*,*,#8393,.T.); +#8393 = EDGE_CURVE('',#8394,#8396,#8398,.T.); +#8394 = VERTEX_POINT('',#8395); +#8395 = CARTESIAN_POINT('',(7.18,0.32,0.3)); +#8396 = VERTEX_POINT('',#8397); +#8397 = CARTESIAN_POINT('',(7.82,0.32,0.3)); +#8398 = LINE('',#8399,#8400); +#8399 = CARTESIAN_POINT('',(8.035,0.32,0.3)); +#8400 = VECTOR('',#8401,1.); +#8401 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#8402 = ORIENTED_EDGE('',*,*,#8403,.T.); +#8403 = EDGE_CURVE('',#8396,#8404,#8406,.T.); +#8404 = VERTEX_POINT('',#8405); +#8405 = CARTESIAN_POINT('',(7.82,-0.32,0.3)); +#8406 = LINE('',#8407,#8408); +#8407 = CARTESIAN_POINT('',(7.82,0.26829700442,0.3)); +#8408 = VECTOR('',#8409,1.); +#8409 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8410 = ORIENTED_EDGE('',*,*,#8411,.T.); +#8411 = EDGE_CURVE('',#8404,#8412,#8414,.T.); +#8412 = VERTEX_POINT('',#8413); +#8413 = CARTESIAN_POINT('',(7.18,-0.32,0.3)); +#8414 = LINE('',#8415,#8416); +#8415 = CARTESIAN_POINT('',(8.035,-0.32,0.3)); +#8416 = VECTOR('',#8417,1.); +#8417 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8418 = ORIENTED_EDGE('',*,*,#8419,.F.); +#8419 = EDGE_CURVE('',#8394,#8412,#8420,.T.); +#8420 = LINE('',#8421,#8422); +#8421 = CARTESIAN_POINT('',(7.18,0.26829700442,0.3)); +#8422 = VECTOR('',#8423,1.); +#8423 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8424 = PLANE('',#8425); +#8425 = AXIS2_PLACEMENT_3D('',#8426,#8427,#8428); +#8426 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#8427 = DIRECTION('',(0.,0.,1.)); +#8428 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8429 = ADVANCED_FACE('',(#8430),#8455,.T.); +#8430 = FACE_BOUND('',#8431,.T.); +#8431 = EDGE_LOOP('',(#8432,#8433,#8441,#8449)); +#8432 = ORIENTED_EDGE('',*,*,#7789,.T.); +#8433 = ORIENTED_EDGE('',*,*,#8434,.T.); +#8434 = EDGE_CURVE('',#7792,#8435,#8437,.T.); +#8435 = VERTEX_POINT('',#8436); +#8436 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#8437 = LINE('',#8438,#8439); +#8438 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#8439 = VECTOR('',#8440,1.); +#8440 = DIRECTION('',(0.,0.,1.)); +#8441 = ORIENTED_EDGE('',*,*,#8442,.T.); +#8442 = EDGE_CURVE('',#8435,#8443,#8445,.T.); +#8443 = VERTEX_POINT('',#8444); +#8444 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#8445 = LINE('',#8446,#8447); +#8446 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#8447 = VECTOR('',#8448,1.); +#8448 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8449 = ORIENTED_EDGE('',*,*,#8450,.T.); +#8450 = EDGE_CURVE('',#8443,#7790,#8451,.T.); +#8451 = LINE('',#8452,#8453); +#8452 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#8453 = VECTOR('',#8454,1.); +#8454 = DIRECTION('',(-0.,0.,-1.)); +#8455 = PLANE('',#8456); +#8456 = AXIS2_PLACEMENT_3D('',#8457,#8458,#8459); +#8457 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#8458 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8459 = DIRECTION('',(0.,0.,1.)); +#8460 = ADVANCED_FACE('',(#8461),#8479,.F.); +#8461 = FACE_BOUND('',#8462,.F.); +#8462 = EDGE_LOOP('',(#8463,#8471,#8472,#8473)); +#8463 = ORIENTED_EDGE('',*,*,#8464,.F.); +#8464 = EDGE_CURVE('',#7808,#8465,#8467,.T.); +#8465 = VERTEX_POINT('',#8466); +#8466 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#8467 = LINE('',#8468,#8469); +#8468 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8469 = VECTOR('',#8470,1.); +#8470 = DIRECTION('',(0.,0.,1.)); +#8471 = ORIENTED_EDGE('',*,*,#7815,.T.); +#8472 = ORIENTED_EDGE('',*,*,#8434,.T.); +#8473 = ORIENTED_EDGE('',*,*,#8474,.F.); +#8474 = EDGE_CURVE('',#8465,#8435,#8475,.T.); +#8475 = LINE('',#8476,#8477); +#8476 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#8477 = VECTOR('',#8478,1.); +#8478 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8479 = PLANE('',#8480); +#8480 = AXIS2_PLACEMENT_3D('',#8481,#8482,#8483); +#8481 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8482 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8483 = DIRECTION('',(0.,-0.,1.)); +#8484 = ADVANCED_FACE('',(#8485),#8503,.F.); +#8485 = FACE_BOUND('',#8486,.F.); +#8486 = EDGE_LOOP('',(#8487,#8488,#8489,#8497)); +#8487 = ORIENTED_EDGE('',*,*,#7807,.T.); +#8488 = ORIENTED_EDGE('',*,*,#8464,.T.); +#8489 = ORIENTED_EDGE('',*,*,#8490,.T.); +#8490 = EDGE_CURVE('',#8465,#8491,#8493,.T.); +#8491 = VERTEX_POINT('',#8492); +#8492 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#8493 = LINE('',#8494,#8495); +#8494 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#8495 = VECTOR('',#8496,1.); +#8496 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8497 = ORIENTED_EDGE('',*,*,#8498,.T.); +#8498 = EDGE_CURVE('',#8491,#7800,#8499,.T.); +#8499 = LINE('',#8500,#8501); +#8500 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8501 = VECTOR('',#8502,1.); +#8502 = DIRECTION('',(-0.,0.,-1.)); +#8503 = PLANE('',#8504); +#8504 = AXIS2_PLACEMENT_3D('',#8505,#8506,#8507); +#8505 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#8506 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8507 = DIRECTION('',(0.,0.,1.)); +#8508 = ADVANCED_FACE('',(#8509),#8520,.F.); +#8509 = FACE_BOUND('',#8510,.F.); +#8510 = EDGE_LOOP('',(#8511,#8512,#8518,#8519)); +#8511 = ORIENTED_EDGE('',*,*,#8498,.F.); +#8512 = ORIENTED_EDGE('',*,*,#8513,.T.); +#8513 = EDGE_CURVE('',#8491,#8443,#8514,.T.); +#8514 = LINE('',#8515,#8516); +#8515 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#8516 = VECTOR('',#8517,1.); +#8517 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8518 = ORIENTED_EDGE('',*,*,#8450,.T.); +#8519 = ORIENTED_EDGE('',*,*,#7799,.T.); +#8520 = PLANE('',#8521); +#8521 = AXIS2_PLACEMENT_3D('',#8522,#8523,#8524); +#8522 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8523 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8524 = DIRECTION('',(-0.,0.,-1.)); +#8525 = ADVANCED_FACE('',(#8526),#8551,.F.); +#8526 = FACE_BOUND('',#8527,.F.); +#8527 = EDGE_LOOP('',(#8528,#8529,#8537,#8545)); +#8528 = ORIENTED_EDGE('',*,*,#7823,.T.); +#8529 = ORIENTED_EDGE('',*,*,#8530,.T.); +#8530 = EDGE_CURVE('',#7826,#8531,#8533,.T.); +#8531 = VERTEX_POINT('',#8532); +#8532 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#8533 = LINE('',#8534,#8535); +#8534 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#8535 = VECTOR('',#8536,1.); +#8536 = DIRECTION('',(0.,0.,1.)); +#8537 = ORIENTED_EDGE('',*,*,#8538,.T.); +#8538 = EDGE_CURVE('',#8531,#8539,#8541,.T.); +#8539 = VERTEX_POINT('',#8540); +#8540 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#8541 = LINE('',#8542,#8543); +#8542 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#8543 = VECTOR('',#8544,1.); +#8544 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8545 = ORIENTED_EDGE('',*,*,#8546,.T.); +#8546 = EDGE_CURVE('',#8539,#7824,#8547,.T.); +#8547 = LINE('',#8548,#8549); +#8548 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#8549 = VECTOR('',#8550,1.); +#8550 = DIRECTION('',(-0.,0.,-1.)); +#8551 = PLANE('',#8552); +#8552 = AXIS2_PLACEMENT_3D('',#8553,#8554,#8555); +#8553 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#8554 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8555 = DIRECTION('',(0.,0.,1.)); +#8556 = ADVANCED_FACE('',(#8557),#8575,.F.); +#8557 = FACE_BOUND('',#8558,.F.); +#8558 = EDGE_LOOP('',(#8559,#8560,#8568,#8574)); +#8559 = ORIENTED_EDGE('',*,*,#8546,.F.); +#8560 = ORIENTED_EDGE('',*,*,#8561,.T.); +#8561 = EDGE_CURVE('',#8539,#8562,#8564,.T.); +#8562 = VERTEX_POINT('',#8563); +#8563 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#8564 = LINE('',#8565,#8566); +#8565 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#8566 = VECTOR('',#8567,1.); +#8567 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8568 = ORIENTED_EDGE('',*,*,#8569,.T.); +#8569 = EDGE_CURVE('',#8562,#7842,#8570,.T.); +#8570 = LINE('',#8571,#8572); +#8571 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#8572 = VECTOR('',#8573,1.); +#8573 = DIRECTION('',(-0.,0.,-1.)); +#8574 = ORIENTED_EDGE('',*,*,#7849,.T.); +#8575 = PLANE('',#8576); +#8576 = AXIS2_PLACEMENT_3D('',#8577,#8578,#8579); +#8577 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#8578 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8579 = DIRECTION('',(-0.,0.,-1.)); +#8580 = ADVANCED_FACE('',(#8581),#8599,.T.); +#8581 = FACE_BOUND('',#8582,.T.); +#8582 = EDGE_LOOP('',(#8583,#8584,#8592,#8598)); +#8583 = ORIENTED_EDGE('',*,*,#7841,.T.); +#8584 = ORIENTED_EDGE('',*,*,#8585,.T.); +#8585 = EDGE_CURVE('',#7834,#8586,#8588,.T.); +#8586 = VERTEX_POINT('',#8587); +#8587 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#8588 = LINE('',#8589,#8590); +#8589 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#8590 = VECTOR('',#8591,1.); +#8591 = DIRECTION('',(0.,0.,1.)); +#8592 = ORIENTED_EDGE('',*,*,#8593,.T.); +#8593 = EDGE_CURVE('',#8586,#8562,#8594,.T.); +#8594 = LINE('',#8595,#8596); +#8595 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#8596 = VECTOR('',#8597,1.); +#8597 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8598 = ORIENTED_EDGE('',*,*,#8569,.T.); +#8599 = PLANE('',#8600); +#8600 = AXIS2_PLACEMENT_3D('',#8601,#8602,#8603); +#8601 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#8602 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8603 = DIRECTION('',(0.,0.,1.)); +#8604 = ADVANCED_FACE('',(#8605),#8616,.F.); +#8605 = FACE_BOUND('',#8606,.F.); +#8606 = EDGE_LOOP('',(#8607,#8608,#8609,#8610)); +#8607 = ORIENTED_EDGE('',*,*,#8530,.F.); +#8608 = ORIENTED_EDGE('',*,*,#7833,.T.); +#8609 = ORIENTED_EDGE('',*,*,#8585,.T.); +#8610 = ORIENTED_EDGE('',*,*,#8611,.F.); +#8611 = EDGE_CURVE('',#8531,#8586,#8612,.T.); +#8612 = LINE('',#8613,#8614); +#8613 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#8614 = VECTOR('',#8615,1.); +#8615 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8616 = PLANE('',#8617); +#8617 = AXIS2_PLACEMENT_3D('',#8618,#8619,#8620); +#8618 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#8619 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8620 = DIRECTION('',(0.,-0.,1.)); +#8621 = ADVANCED_FACE('',(#8622),#8647,.T.); +#8622 = FACE_BOUND('',#8623,.T.); +#8623 = EDGE_LOOP('',(#8624,#8625,#8633,#8641)); +#8624 = ORIENTED_EDGE('',*,*,#7857,.T.); +#8625 = ORIENTED_EDGE('',*,*,#8626,.T.); +#8626 = EDGE_CURVE('',#7860,#8627,#8629,.T.); +#8627 = VERTEX_POINT('',#8628); +#8628 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#8629 = LINE('',#8630,#8631); +#8630 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#8631 = VECTOR('',#8632,1.); +#8632 = DIRECTION('',(0.,0.,1.)); +#8633 = ORIENTED_EDGE('',*,*,#8634,.T.); +#8634 = EDGE_CURVE('',#8627,#8635,#8637,.T.); +#8635 = VERTEX_POINT('',#8636); +#8636 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#8637 = LINE('',#8638,#8639); +#8638 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#8639 = VECTOR('',#8640,1.); +#8640 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8641 = ORIENTED_EDGE('',*,*,#8642,.T.); +#8642 = EDGE_CURVE('',#8635,#7858,#8643,.T.); +#8643 = LINE('',#8644,#8645); +#8644 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#8645 = VECTOR('',#8646,1.); +#8646 = DIRECTION('',(-0.,0.,-1.)); +#8647 = PLANE('',#8648); +#8648 = AXIS2_PLACEMENT_3D('',#8649,#8650,#8651); +#8649 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#8650 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8651 = DIRECTION('',(0.,0.,1.)); +#8652 = ADVANCED_FACE('',(#8653),#8671,.F.); +#8653 = FACE_BOUND('',#8654,.F.); +#8654 = EDGE_LOOP('',(#8655,#8663,#8664,#8665)); +#8655 = ORIENTED_EDGE('',*,*,#8656,.F.); +#8656 = EDGE_CURVE('',#7876,#8657,#8659,.T.); +#8657 = VERTEX_POINT('',#8658); +#8658 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#8659 = LINE('',#8660,#8661); +#8660 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#8661 = VECTOR('',#8662,1.); +#8662 = DIRECTION('',(0.,0.,1.)); +#8663 = ORIENTED_EDGE('',*,*,#7883,.T.); +#8664 = ORIENTED_EDGE('',*,*,#8626,.T.); +#8665 = ORIENTED_EDGE('',*,*,#8666,.F.); +#8666 = EDGE_CURVE('',#8657,#8627,#8667,.T.); +#8667 = LINE('',#8668,#8669); +#8668 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#8669 = VECTOR('',#8670,1.); +#8670 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8671 = PLANE('',#8672); +#8672 = AXIS2_PLACEMENT_3D('',#8673,#8674,#8675); +#8673 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#8674 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8675 = DIRECTION('',(0.,-0.,1.)); +#8676 = ADVANCED_FACE('',(#8677),#8695,.F.); +#8677 = FACE_BOUND('',#8678,.F.); +#8678 = EDGE_LOOP('',(#8679,#8680,#8681,#8689)); +#8679 = ORIENTED_EDGE('',*,*,#7875,.T.); +#8680 = ORIENTED_EDGE('',*,*,#8656,.T.); +#8681 = ORIENTED_EDGE('',*,*,#8682,.T.); +#8682 = EDGE_CURVE('',#8657,#8683,#8685,.T.); +#8683 = VERTEX_POINT('',#8684); +#8684 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#8685 = LINE('',#8686,#8687); +#8686 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#8687 = VECTOR('',#8688,1.); +#8688 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8689 = ORIENTED_EDGE('',*,*,#8690,.T.); +#8690 = EDGE_CURVE('',#8683,#7868,#8691,.T.); +#8691 = LINE('',#8692,#8693); +#8692 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#8693 = VECTOR('',#8694,1.); +#8694 = DIRECTION('',(-0.,0.,-1.)); +#8695 = PLANE('',#8696); +#8696 = AXIS2_PLACEMENT_3D('',#8697,#8698,#8699); +#8697 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#8698 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8699 = DIRECTION('',(0.,0.,1.)); +#8700 = ADVANCED_FACE('',(#8701),#8712,.F.); +#8701 = FACE_BOUND('',#8702,.F.); +#8702 = EDGE_LOOP('',(#8703,#8704,#8710,#8711)); +#8703 = ORIENTED_EDGE('',*,*,#8690,.F.); +#8704 = ORIENTED_EDGE('',*,*,#8705,.T.); +#8705 = EDGE_CURVE('',#8683,#8635,#8706,.T.); +#8706 = LINE('',#8707,#8708); +#8707 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#8708 = VECTOR('',#8709,1.); +#8709 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8710 = ORIENTED_EDGE('',*,*,#8642,.T.); +#8711 = ORIENTED_EDGE('',*,*,#7867,.T.); +#8712 = PLANE('',#8713); +#8713 = AXIS2_PLACEMENT_3D('',#8714,#8715,#8716); +#8714 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#8715 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8716 = DIRECTION('',(-0.,0.,-1.)); +#8717 = ADVANCED_FACE('',(#8718),#8743,.F.); +#8718 = FACE_BOUND('',#8719,.F.); +#8719 = EDGE_LOOP('',(#8720,#8728,#8736,#8742)); +#8720 = ORIENTED_EDGE('',*,*,#8721,.F.); +#8721 = EDGE_CURVE('',#8722,#7894,#8724,.T.); +#8722 = VERTEX_POINT('',#8723); +#8723 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#8724 = LINE('',#8725,#8726); +#8725 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#8726 = VECTOR('',#8727,1.); +#8727 = DIRECTION('',(-0.,0.,-1.)); +#8728 = ORIENTED_EDGE('',*,*,#8729,.T.); +#8729 = EDGE_CURVE('',#8722,#8730,#8732,.T.); +#8730 = VERTEX_POINT('',#8731); +#8731 = CARTESIAN_POINT('',(7.18,0.32,6.3)); +#8732 = LINE('',#8733,#8734); +#8733 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#8734 = VECTOR('',#8735,1.); +#8735 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8736 = ORIENTED_EDGE('',*,*,#8737,.T.); +#8737 = EDGE_CURVE('',#8730,#7892,#8738,.T.); +#8738 = LINE('',#8739,#8740); +#8739 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#8740 = VECTOR('',#8741,1.); +#8741 = DIRECTION('',(-0.,0.,-1.)); +#8742 = ORIENTED_EDGE('',*,*,#7891,.T.); +#8743 = PLANE('',#8744); +#8744 = AXIS2_PLACEMENT_3D('',#8745,#8746,#8747); +#8745 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#8746 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8747 = DIRECTION('',(-0.,0.,-1.)); +#8748 = ADVANCED_FACE('',(#8749),#8767,.T.); +#8749 = FACE_BOUND('',#8750,.T.); +#8750 = EDGE_LOOP('',(#8751,#8752,#8760,#8766)); +#8751 = ORIENTED_EDGE('',*,*,#7917,.T.); +#8752 = ORIENTED_EDGE('',*,*,#8753,.T.); +#8753 = EDGE_CURVE('',#7910,#8754,#8756,.T.); +#8754 = VERTEX_POINT('',#8755); +#8755 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#8756 = LINE('',#8757,#8758); +#8757 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#8758 = VECTOR('',#8759,1.); +#8759 = DIRECTION('',(0.,0.,1.)); +#8760 = ORIENTED_EDGE('',*,*,#8761,.T.); +#8761 = EDGE_CURVE('',#8754,#8730,#8762,.T.); +#8762 = LINE('',#8763,#8764); +#8763 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#8764 = VECTOR('',#8765,1.); +#8765 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8766 = ORIENTED_EDGE('',*,*,#8737,.T.); +#8767 = PLANE('',#8768); +#8768 = AXIS2_PLACEMENT_3D('',#8769,#8770,#8771); +#8769 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#8770 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8771 = DIRECTION('',(0.,0.,1.)); +#8772 = ADVANCED_FACE('',(#8773),#8791,.F.); +#8773 = FACE_BOUND('',#8774,.F.); +#8774 = EDGE_LOOP('',(#8775,#8783,#8784,#8785)); +#8775 = ORIENTED_EDGE('',*,*,#8776,.F.); +#8776 = EDGE_CURVE('',#7902,#8777,#8779,.T.); +#8777 = VERTEX_POINT('',#8778); +#8778 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#8779 = LINE('',#8780,#8781); +#8780 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#8781 = VECTOR('',#8782,1.); +#8782 = DIRECTION('',(0.,0.,1.)); +#8783 = ORIENTED_EDGE('',*,*,#7909,.T.); +#8784 = ORIENTED_EDGE('',*,*,#8753,.T.); +#8785 = ORIENTED_EDGE('',*,*,#8786,.F.); +#8786 = EDGE_CURVE('',#8777,#8754,#8787,.T.); +#8787 = LINE('',#8788,#8789); +#8788 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#8789 = VECTOR('',#8790,1.); +#8790 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8791 = PLANE('',#8792); +#8792 = AXIS2_PLACEMENT_3D('',#8793,#8794,#8795); +#8793 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#8794 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8795 = DIRECTION('',(0.,-0.,1.)); +#8796 = ADVANCED_FACE('',(#8797),#8808,.F.); +#8797 = FACE_BOUND('',#8798,.F.); +#8798 = EDGE_LOOP('',(#8799,#8800,#8801,#8807)); +#8799 = ORIENTED_EDGE('',*,*,#7901,.T.); +#8800 = ORIENTED_EDGE('',*,*,#8776,.T.); +#8801 = ORIENTED_EDGE('',*,*,#8802,.T.); +#8802 = EDGE_CURVE('',#8777,#8722,#8803,.T.); +#8803 = LINE('',#8804,#8805); +#8804 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#8805 = VECTOR('',#8806,1.); +#8806 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8807 = ORIENTED_EDGE('',*,*,#8721,.T.); +#8808 = PLANE('',#8809); +#8809 = AXIS2_PLACEMENT_3D('',#8810,#8811,#8812); +#8810 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#8811 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8812 = DIRECTION('',(0.,0.,1.)); +#8813 = ADVANCED_FACE('',(#8814),#8871,.T.); +#8814 = FACE_BOUND('',#8815,.T.); +#8815 = EDGE_LOOP('',(#8816,#8826,#8834,#8842,#8848,#8849,#8857,#8865)); +#8816 = ORIENTED_EDGE('',*,*,#8817,.T.); +#8817 = EDGE_CURVE('',#8818,#8820,#8822,.T.); +#8818 = VERTEX_POINT('',#8819); +#8819 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#8820 = VERTEX_POINT('',#8821); +#8821 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#8822 = LINE('',#8823,#8824); +#8823 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#8824 = VECTOR('',#8825,1.); +#8825 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8826 = ORIENTED_EDGE('',*,*,#8827,.T.); +#8827 = EDGE_CURVE('',#8820,#8828,#8830,.T.); +#8828 = VERTEX_POINT('',#8829); +#8829 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#8830 = LINE('',#8831,#8832); +#8831 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#8832 = VECTOR('',#8833,1.); +#8833 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#8834 = ORIENTED_EDGE('',*,*,#8835,.T.); +#8835 = EDGE_CURVE('',#8828,#8836,#8838,.T.); +#8836 = VERTEX_POINT('',#8837); +#8837 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#8838 = LINE('',#8839,#8840); +#8839 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#8840 = VECTOR('',#8841,1.); +#8841 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#8842 = ORIENTED_EDGE('',*,*,#8843,.T.); +#8843 = EDGE_CURVE('',#8836,#8258,#8844,.T.); +#8844 = LINE('',#8845,#8846); +#8845 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#8846 = VECTOR('',#8847,1.); +#8847 = DIRECTION('',(0.,0.,1.)); +#8848 = ORIENTED_EDGE('',*,*,#8255,.F.); +#8849 = ORIENTED_EDGE('',*,*,#8850,.T.); +#8850 = EDGE_CURVE('',#8256,#8851,#8853,.T.); +#8851 = VERTEX_POINT('',#8852); +#8852 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#8853 = LINE('',#8854,#8855); +#8854 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#8855 = VECTOR('',#8856,1.); +#8856 = DIRECTION('',(-0.,0.,-1.)); +#8857 = ORIENTED_EDGE('',*,*,#8858,.T.); +#8858 = EDGE_CURVE('',#8851,#8859,#8861,.T.); +#8859 = VERTEX_POINT('',#8860); +#8860 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#8861 = LINE('',#8862,#8863); +#8862 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#8863 = VECTOR('',#8864,1.); +#8864 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#8865 = ORIENTED_EDGE('',*,*,#8866,.T.); +#8866 = EDGE_CURVE('',#8859,#8818,#8867,.T.); +#8867 = LINE('',#8868,#8869); +#8868 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#8869 = VECTOR('',#8870,1.); +#8870 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#8871 = PLANE('',#8872); +#8872 = AXIS2_PLACEMENT_3D('',#8873,#8874,#8875); +#8873 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#8874 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8875 = DIRECTION('',(0.,0.,1.)); +#8876 = ADVANCED_FACE('',(#8877),#8895,.F.); +#8877 = FACE_BOUND('',#8878,.F.); +#8878 = EDGE_LOOP('',(#8879,#8887,#8893,#8894)); +#8879 = ORIENTED_EDGE('',*,*,#8880,.F.); +#8880 = EDGE_CURVE('',#8881,#8274,#8883,.T.); +#8881 = VERTEX_POINT('',#8882); +#8882 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8883 = LINE('',#8884,#8885); +#8884 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8885 = VECTOR('',#8886,1.); +#8886 = DIRECTION('',(0.,0.,1.)); +#8887 = ORIENTED_EDGE('',*,*,#8888,.T.); +#8888 = EDGE_CURVE('',#8881,#8836,#8889,.T.); +#8889 = LINE('',#8890,#8891); +#8890 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8891 = VECTOR('',#8892,1.); +#8892 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8893 = ORIENTED_EDGE('',*,*,#8843,.T.); +#8894 = ORIENTED_EDGE('',*,*,#8281,.F.); +#8895 = PLANE('',#8896); +#8896 = AXIS2_PLACEMENT_3D('',#8897,#8898,#8899); +#8897 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#8898 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#8899 = DIRECTION('',(0.,-0.,1.)); +#8900 = ADVANCED_FACE('',(#8901),#8951,.F.); +#8901 = FACE_BOUND('',#8902,.F.); +#8902 = EDGE_LOOP('',(#8903,#8913,#8921,#8927,#8928,#8929,#8937,#8945)); +#8903 = ORIENTED_EDGE('',*,*,#8904,.T.); +#8904 = EDGE_CURVE('',#8905,#8907,#8909,.T.); +#8905 = VERTEX_POINT('',#8906); +#8906 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#8907 = VERTEX_POINT('',#8908); +#8908 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#8909 = LINE('',#8910,#8911); +#8910 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#8911 = VECTOR('',#8912,1.); +#8912 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8913 = ORIENTED_EDGE('',*,*,#8914,.T.); +#8914 = EDGE_CURVE('',#8907,#8915,#8917,.T.); +#8915 = VERTEX_POINT('',#8916); +#8916 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#8917 = LINE('',#8918,#8919); +#8918 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#8919 = VECTOR('',#8920,1.); +#8920 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#8921 = ORIENTED_EDGE('',*,*,#8922,.T.); +#8922 = EDGE_CURVE('',#8915,#8881,#8923,.T.); +#8923 = LINE('',#8924,#8925); +#8924 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#8925 = VECTOR('',#8926,1.); +#8926 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#8927 = ORIENTED_EDGE('',*,*,#8880,.T.); +#8928 = ORIENTED_EDGE('',*,*,#8273,.F.); +#8929 = ORIENTED_EDGE('',*,*,#8930,.T.); +#8930 = EDGE_CURVE('',#8266,#8931,#8933,.T.); +#8931 = VERTEX_POINT('',#8932); +#8932 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#8933 = LINE('',#8934,#8935); +#8934 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8935 = VECTOR('',#8936,1.); +#8936 = DIRECTION('',(-0.,0.,-1.)); +#8937 = ORIENTED_EDGE('',*,*,#8938,.T.); +#8938 = EDGE_CURVE('',#8931,#8939,#8941,.T.); +#8939 = VERTEX_POINT('',#8940); +#8940 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#8941 = LINE('',#8942,#8943); +#8942 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#8943 = VECTOR('',#8944,1.); +#8944 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#8945 = ORIENTED_EDGE('',*,*,#8946,.T.); +#8946 = EDGE_CURVE('',#8939,#8905,#8947,.T.); +#8947 = LINE('',#8948,#8949); +#8948 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#8949 = VECTOR('',#8950,1.); +#8950 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#8951 = PLANE('',#8952); +#8952 = AXIS2_PLACEMENT_3D('',#8953,#8954,#8955); +#8953 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#8954 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8955 = DIRECTION('',(0.,0.,1.)); +#8956 = ADVANCED_FACE('',(#8957),#8968,.F.); +#8957 = FACE_BOUND('',#8958,.F.); +#8958 = EDGE_LOOP('',(#8959,#8960,#8961,#8962)); +#8959 = ORIENTED_EDGE('',*,*,#8930,.F.); +#8960 = ORIENTED_EDGE('',*,*,#8265,.F.); +#8961 = ORIENTED_EDGE('',*,*,#8850,.T.); +#8962 = ORIENTED_EDGE('',*,*,#8963,.F.); +#8963 = EDGE_CURVE('',#8931,#8851,#8964,.T.); +#8964 = LINE('',#8965,#8966); +#8965 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#8966 = VECTOR('',#8967,1.); +#8967 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#8968 = PLANE('',#8969); +#8969 = AXIS2_PLACEMENT_3D('',#8970,#8971,#8972); +#8970 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#8971 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8972 = DIRECTION('',(-0.,0.,-1.)); +#8973 = ADVANCED_FACE('',(#8974),#8999,.F.); +#8974 = FACE_BOUND('',#8975,.F.); +#8975 = EDGE_LOOP('',(#8976,#8986,#8992,#8993)); +#8976 = ORIENTED_EDGE('',*,*,#8977,.T.); +#8977 = EDGE_CURVE('',#8978,#8980,#8982,.T.); +#8978 = VERTEX_POINT('',#8979); +#8979 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#8980 = VERTEX_POINT('',#8981); +#8981 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#8982 = LINE('',#8983,#8984); +#8983 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#8984 = VECTOR('',#8985,1.); +#8985 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#8986 = ORIENTED_EDGE('',*,*,#8987,.T.); +#8987 = EDGE_CURVE('',#8980,#8304,#8988,.T.); +#8988 = LINE('',#8989,#8990); +#8989 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#8990 = VECTOR('',#8991,1.); +#8991 = DIRECTION('',(0.,0.,1.)); +#8992 = ORIENTED_EDGE('',*,*,#8301,.F.); +#8993 = ORIENTED_EDGE('',*,*,#8994,.T.); +#8994 = EDGE_CURVE('',#8302,#8978,#8995,.T.); +#8995 = LINE('',#8996,#8997); +#8996 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#8997 = VECTOR('',#8998,1.); +#8998 = DIRECTION('',(-0.,0.,-1.)); +#8999 = PLANE('',#9000); +#9000 = AXIS2_PLACEMENT_3D('',#9001,#9002,#9003); +#9001 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#9002 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9003 = DIRECTION('',(0.,0.,1.)); +#9004 = ADVANCED_FACE('',(#9005),#9023,.F.); +#9005 = FACE_BOUND('',#9006,.F.); +#9006 = EDGE_LOOP('',(#9007,#9008,#9009,#9017)); +#9007 = ORIENTED_EDGE('',*,*,#8994,.F.); +#9008 = ORIENTED_EDGE('',*,*,#8327,.F.); +#9009 = ORIENTED_EDGE('',*,*,#9010,.T.); +#9010 = EDGE_CURVE('',#8320,#9011,#9013,.T.); +#9011 = VERTEX_POINT('',#9012); +#9012 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#9013 = LINE('',#9014,#9015); +#9014 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#9015 = VECTOR('',#9016,1.); +#9016 = DIRECTION('',(-0.,0.,-1.)); +#9017 = ORIENTED_EDGE('',*,*,#9018,.F.); +#9018 = EDGE_CURVE('',#8978,#9011,#9019,.T.); +#9019 = LINE('',#9020,#9021); +#9020 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#9021 = VECTOR('',#9022,1.); +#9022 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9023 = PLANE('',#9024); +#9024 = AXIS2_PLACEMENT_3D('',#9025,#9026,#9027); +#9025 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#9026 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9027 = DIRECTION('',(-0.,0.,-1.)); +#9028 = ADVANCED_FACE('',(#9029),#9047,.T.); +#9029 = FACE_BOUND('',#9030,.T.); +#9030 = EDGE_LOOP('',(#9031,#9039,#9045,#9046)); +#9031 = ORIENTED_EDGE('',*,*,#9032,.T.); +#9032 = EDGE_CURVE('',#9011,#9033,#9035,.T.); +#9033 = VERTEX_POINT('',#9034); +#9034 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#9035 = LINE('',#9036,#9037); +#9036 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#9037 = VECTOR('',#9038,1.); +#9038 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9039 = ORIENTED_EDGE('',*,*,#9040,.T.); +#9040 = EDGE_CURVE('',#9033,#8312,#9041,.T.); +#9041 = LINE('',#9042,#9043); +#9042 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#9043 = VECTOR('',#9044,1.); +#9044 = DIRECTION('',(0.,0.,1.)); +#9045 = ORIENTED_EDGE('',*,*,#8319,.F.); +#9046 = ORIENTED_EDGE('',*,*,#9010,.T.); +#9047 = PLANE('',#9048); +#9048 = AXIS2_PLACEMENT_3D('',#9049,#9050,#9051); +#9049 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#9050 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9051 = DIRECTION('',(0.,0.,1.)); +#9052 = ADVANCED_FACE('',(#9053),#9064,.F.); +#9053 = FACE_BOUND('',#9054,.F.); +#9054 = EDGE_LOOP('',(#9055,#9056,#9062,#9063)); +#9055 = ORIENTED_EDGE('',*,*,#8987,.F.); +#9056 = ORIENTED_EDGE('',*,*,#9057,.T.); +#9057 = EDGE_CURVE('',#8980,#9033,#9058,.T.); +#9058 = LINE('',#9059,#9060); +#9059 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#9060 = VECTOR('',#9061,1.); +#9061 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9062 = ORIENTED_EDGE('',*,*,#9040,.T.); +#9063 = ORIENTED_EDGE('',*,*,#8311,.F.); +#9064 = PLANE('',#9065); +#9065 = AXIS2_PLACEMENT_3D('',#9066,#9067,#9068); +#9066 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#9067 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9068 = DIRECTION('',(0.,-0.,1.)); +#9069 = ADVANCED_FACE('',(#9070),#9095,.T.); +#9070 = FACE_BOUND('',#9071,.T.); +#9071 = EDGE_LOOP('',(#9072,#9082,#9088,#9089)); +#9072 = ORIENTED_EDGE('',*,*,#9073,.T.); +#9073 = EDGE_CURVE('',#9074,#9076,#9078,.T.); +#9074 = VERTEX_POINT('',#9075); +#9075 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#9076 = VERTEX_POINT('',#9077); +#9077 = CARTESIAN_POINT('',(4.68,-0.32,-3.2)); +#9078 = LINE('',#9079,#9080); +#9079 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#9080 = VECTOR('',#9081,1.); +#9081 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9082 = ORIENTED_EDGE('',*,*,#9083,.T.); +#9083 = EDGE_CURVE('',#9076,#8350,#9084,.T.); +#9084 = LINE('',#9085,#9086); +#9085 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#9086 = VECTOR('',#9087,1.); +#9087 = DIRECTION('',(0.,0.,1.)); +#9088 = ORIENTED_EDGE('',*,*,#8347,.F.); +#9089 = ORIENTED_EDGE('',*,*,#9090,.T.); +#9090 = EDGE_CURVE('',#8348,#9074,#9091,.T.); +#9091 = LINE('',#9092,#9093); +#9092 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#9093 = VECTOR('',#9094,1.); +#9094 = DIRECTION('',(-0.,0.,-1.)); +#9095 = PLANE('',#9096); +#9096 = AXIS2_PLACEMENT_3D('',#9097,#9098,#9099); +#9097 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#9098 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9099 = DIRECTION('',(0.,0.,1.)); +#9100 = ADVANCED_FACE('',(#9101),#9119,.F.); +#9101 = FACE_BOUND('',#9102,.F.); +#9102 = EDGE_LOOP('',(#9103,#9111,#9117,#9118)); +#9103 = ORIENTED_EDGE('',*,*,#9104,.F.); +#9104 = EDGE_CURVE('',#9105,#8366,#9107,.T.); +#9105 = VERTEX_POINT('',#9106); +#9106 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#9107 = LINE('',#9108,#9109); +#9108 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#9109 = VECTOR('',#9110,1.); +#9110 = DIRECTION('',(0.,0.,1.)); +#9111 = ORIENTED_EDGE('',*,*,#9112,.T.); +#9112 = EDGE_CURVE('',#9105,#9076,#9113,.T.); +#9113 = LINE('',#9114,#9115); +#9114 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#9115 = VECTOR('',#9116,1.); +#9116 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9117 = ORIENTED_EDGE('',*,*,#9083,.T.); +#9118 = ORIENTED_EDGE('',*,*,#8373,.F.); +#9119 = PLANE('',#9120); +#9120 = AXIS2_PLACEMENT_3D('',#9121,#9122,#9123); +#9121 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#9122 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9123 = DIRECTION('',(0.,-0.,1.)); +#9124 = ADVANCED_FACE('',(#9125),#9143,.F.); +#9125 = FACE_BOUND('',#9126,.F.); +#9126 = EDGE_LOOP('',(#9127,#9135,#9136,#9137)); +#9127 = ORIENTED_EDGE('',*,*,#9128,.T.); +#9128 = EDGE_CURVE('',#9129,#9105,#9131,.T.); +#9129 = VERTEX_POINT('',#9130); +#9130 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#9131 = LINE('',#9132,#9133); +#9132 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#9133 = VECTOR('',#9134,1.); +#9134 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9135 = ORIENTED_EDGE('',*,*,#9104,.T.); +#9136 = ORIENTED_EDGE('',*,*,#8365,.F.); +#9137 = ORIENTED_EDGE('',*,*,#9138,.T.); +#9138 = EDGE_CURVE('',#8358,#9129,#9139,.T.); +#9139 = LINE('',#9140,#9141); +#9140 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#9141 = VECTOR('',#9142,1.); +#9142 = DIRECTION('',(-0.,0.,-1.)); +#9143 = PLANE('',#9144); +#9144 = AXIS2_PLACEMENT_3D('',#9145,#9146,#9147); +#9145 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#9146 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9147 = DIRECTION('',(0.,0.,1.)); +#9148 = ADVANCED_FACE('',(#9149),#9160,.F.); +#9149 = FACE_BOUND('',#9150,.F.); +#9150 = EDGE_LOOP('',(#9151,#9152,#9153,#9154)); +#9151 = ORIENTED_EDGE('',*,*,#9138,.F.); +#9152 = ORIENTED_EDGE('',*,*,#8357,.F.); +#9153 = ORIENTED_EDGE('',*,*,#9090,.T.); +#9154 = ORIENTED_EDGE('',*,*,#9155,.F.); +#9155 = EDGE_CURVE('',#9129,#9074,#9156,.T.); +#9156 = LINE('',#9157,#9158); +#9157 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#9158 = VECTOR('',#9159,1.); +#9159 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9160 = PLANE('',#9161); +#9161 = AXIS2_PLACEMENT_3D('',#9162,#9163,#9164); +#9162 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#9163 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9164 = DIRECTION('',(-0.,0.,-1.)); +#9165 = ADVANCED_FACE('',(#9166),#9191,.F.); +#9166 = FACE_BOUND('',#9167,.F.); +#9167 = EDGE_LOOP('',(#9168,#9176,#9177,#9185)); +#9168 = ORIENTED_EDGE('',*,*,#9169,.F.); +#9169 = EDGE_CURVE('',#8396,#9170,#9172,.T.); +#9170 = VERTEX_POINT('',#9171); +#9171 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#9172 = LINE('',#9173,#9174); +#9173 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#9174 = VECTOR('',#9175,1.); +#9175 = DIRECTION('',(-0.,0.,-1.)); +#9176 = ORIENTED_EDGE('',*,*,#8393,.F.); +#9177 = ORIENTED_EDGE('',*,*,#9178,.T.); +#9178 = EDGE_CURVE('',#8394,#9179,#9181,.T.); +#9179 = VERTEX_POINT('',#9180); +#9180 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#9181 = LINE('',#9182,#9183); +#9182 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#9183 = VECTOR('',#9184,1.); +#9184 = DIRECTION('',(-0.,0.,-1.)); +#9185 = ORIENTED_EDGE('',*,*,#9186,.F.); +#9186 = EDGE_CURVE('',#9170,#9179,#9187,.T.); +#9187 = LINE('',#9188,#9189); +#9188 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#9189 = VECTOR('',#9190,1.); +#9190 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9191 = PLANE('',#9192); +#9192 = AXIS2_PLACEMENT_3D('',#9193,#9194,#9195); +#9193 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#9194 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9195 = DIRECTION('',(-0.,0.,-1.)); +#9196 = ADVANCED_FACE('',(#9197),#9247,.T.); +#9197 = FACE_BOUND('',#9198,.T.); +#9198 = EDGE_LOOP('',(#9199,#9209,#9217,#9225,#9231,#9232,#9233,#9241)); +#9199 = ORIENTED_EDGE('',*,*,#9200,.T.); +#9200 = EDGE_CURVE('',#9201,#9203,#9205,.T.); +#9201 = VERTEX_POINT('',#9202); +#9202 = CARTESIAN_POINT('',(7.18,0.351578947368,-3.2)); +#9203 = VERTEX_POINT('',#9204); +#9204 = CARTESIAN_POINT('',(7.18,-0.288421052632,-3.2)); +#9205 = LINE('',#9206,#9207); +#9206 = CARTESIAN_POINT('',(7.18,0.32,-3.2)); +#9207 = VECTOR('',#9208,1.); +#9208 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9209 = ORIENTED_EDGE('',*,*,#9210,.T.); +#9210 = EDGE_CURVE('',#9203,#9211,#9213,.T.); +#9211 = VERTEX_POINT('',#9212); +#9212 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#9213 = LINE('',#9214,#9215); +#9214 = CARTESIAN_POINT('',(7.18,-0.32,-3.4)); +#9215 = VECTOR('',#9216,1.); +#9216 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#9217 = ORIENTED_EDGE('',*,*,#9218,.T.); +#9218 = EDGE_CURVE('',#9211,#9219,#9221,.T.); +#9219 = VERTEX_POINT('',#9220); +#9220 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#9221 = LINE('',#9222,#9223); +#9222 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#9223 = VECTOR('',#9224,1.); +#9224 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#9225 = ORIENTED_EDGE('',*,*,#9226,.T.); +#9226 = EDGE_CURVE('',#9219,#8412,#9227,.T.); +#9227 = LINE('',#9228,#9229); +#9228 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#9229 = VECTOR('',#9230,1.); +#9230 = DIRECTION('',(0.,0.,1.)); +#9231 = ORIENTED_EDGE('',*,*,#8419,.F.); +#9232 = ORIENTED_EDGE('',*,*,#9178,.T.); +#9233 = ORIENTED_EDGE('',*,*,#9234,.T.); +#9234 = EDGE_CURVE('',#9179,#9235,#9237,.T.); +#9235 = VERTEX_POINT('',#9236); +#9236 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#9237 = LINE('',#9238,#9239); +#9238 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#9239 = VECTOR('',#9240,1.); +#9240 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#9241 = ORIENTED_EDGE('',*,*,#9242,.T.); +#9242 = EDGE_CURVE('',#9235,#9201,#9243,.T.); +#9243 = LINE('',#9244,#9245); +#9244 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#9245 = VECTOR('',#9246,1.); +#9246 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#9247 = PLANE('',#9248); +#9248 = AXIS2_PLACEMENT_3D('',#9249,#9250,#9251); +#9249 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#9250 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9251 = DIRECTION('',(0.,0.,1.)); +#9252 = ADVANCED_FACE('',(#9253),#9271,.F.); +#9253 = FACE_BOUND('',#9254,.F.); +#9254 = EDGE_LOOP('',(#9255,#9263,#9269,#9270)); +#9255 = ORIENTED_EDGE('',*,*,#9256,.F.); +#9256 = EDGE_CURVE('',#9257,#8404,#9259,.T.); +#9257 = VERTEX_POINT('',#9258); +#9258 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9259 = LINE('',#9260,#9261); +#9260 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9261 = VECTOR('',#9262,1.); +#9262 = DIRECTION('',(0.,0.,1.)); +#9263 = ORIENTED_EDGE('',*,*,#9264,.T.); +#9264 = EDGE_CURVE('',#9257,#9219,#9265,.T.); +#9265 = LINE('',#9266,#9267); +#9266 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9267 = VECTOR('',#9268,1.); +#9268 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9269 = ORIENTED_EDGE('',*,*,#9226,.T.); +#9270 = ORIENTED_EDGE('',*,*,#8411,.F.); +#9271 = PLANE('',#9272); +#9272 = AXIS2_PLACEMENT_3D('',#9273,#9274,#9275); +#9273 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#9274 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9275 = DIRECTION('',(0.,-0.,1.)); +#9276 = ADVANCED_FACE('',(#9277),#9320,.F.); +#9277 = FACE_BOUND('',#9278,.F.); +#9278 = EDGE_LOOP('',(#9279,#9289,#9297,#9303,#9304,#9305,#9306,#9314)); +#9279 = ORIENTED_EDGE('',*,*,#9280,.T.); +#9280 = EDGE_CURVE('',#9281,#9283,#9285,.T.); +#9281 = VERTEX_POINT('',#9282); +#9282 = CARTESIAN_POINT('',(7.82,0.351578947368,-3.2)); +#9283 = VERTEX_POINT('',#9284); +#9284 = CARTESIAN_POINT('',(7.82,-0.288421052632,-3.2)); +#9285 = LINE('',#9286,#9287); +#9286 = CARTESIAN_POINT('',(7.82,0.32,-3.2)); +#9287 = VECTOR('',#9288,1.); +#9288 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9289 = ORIENTED_EDGE('',*,*,#9290,.T.); +#9290 = EDGE_CURVE('',#9283,#9291,#9293,.T.); +#9291 = VERTEX_POINT('',#9292); +#9292 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#9293 = LINE('',#9294,#9295); +#9294 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#9295 = VECTOR('',#9296,1.); +#9296 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#9297 = ORIENTED_EDGE('',*,*,#9298,.T.); +#9298 = EDGE_CURVE('',#9291,#9257,#9299,.T.); +#9299 = LINE('',#9300,#9301); +#9300 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#9301 = VECTOR('',#9302,1.); +#9302 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#9303 = ORIENTED_EDGE('',*,*,#9256,.T.); +#9304 = ORIENTED_EDGE('',*,*,#8403,.F.); +#9305 = ORIENTED_EDGE('',*,*,#9169,.T.); +#9306 = ORIENTED_EDGE('',*,*,#9307,.T.); +#9307 = EDGE_CURVE('',#9170,#9308,#9310,.T.); +#9308 = VERTEX_POINT('',#9309); +#9309 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#9310 = LINE('',#9311,#9312); +#9311 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#9312 = VECTOR('',#9313,1.); +#9313 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#9314 = ORIENTED_EDGE('',*,*,#9315,.T.); +#9315 = EDGE_CURVE('',#9308,#9281,#9316,.T.); +#9316 = LINE('',#9317,#9318); +#9317 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#9318 = VECTOR('',#9319,1.); +#9319 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#9320 = PLANE('',#9321); +#9321 = AXIS2_PLACEMENT_3D('',#9322,#9323,#9324); +#9322 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#9323 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9324 = DIRECTION('',(0.,0.,1.)); +#9325 = ADVANCED_FACE('',(#9326),#9351,.F.); +#9326 = FACE_BOUND('',#9327,.T.); +#9327 = EDGE_LOOP('',(#9328,#9336,#9344,#9350)); +#9328 = ORIENTED_EDGE('',*,*,#9329,.F.); +#9329 = EDGE_CURVE('',#9330,#8435,#9332,.T.); +#9330 = VERTEX_POINT('',#9331); +#9331 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#9332 = LINE('',#9333,#9334); +#9333 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#9334 = VECTOR('',#9335,1.); +#9335 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9336 = ORIENTED_EDGE('',*,*,#9337,.T.); +#9337 = EDGE_CURVE('',#9330,#9338,#9340,.T.); +#9338 = VERTEX_POINT('',#9339); +#9339 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#9340 = LINE('',#9341,#9342); +#9341 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#9342 = VECTOR('',#9343,1.); +#9343 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9344 = ORIENTED_EDGE('',*,*,#9345,.T.); +#9345 = EDGE_CURVE('',#9338,#8443,#9346,.T.); +#9346 = LINE('',#9347,#9348); +#9347 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#9348 = VECTOR('',#9349,1.); +#9349 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9350 = ORIENTED_EDGE('',*,*,#8442,.F.); +#9351 = PLANE('',#9352); +#9352 = AXIS2_PLACEMENT_3D('',#9353,#9354,#9355); +#9353 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#9354 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9355 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9356 = ADVANCED_FACE('',(#9357),#9375,.T.); +#9357 = FACE_BOUND('',#9358,.F.); +#9358 = EDGE_LOOP('',(#9359,#9367,#9368,#9369)); +#9359 = ORIENTED_EDGE('',*,*,#9360,.F.); +#9360 = EDGE_CURVE('',#8465,#9361,#9363,.T.); +#9361 = VERTEX_POINT('',#9362); +#9362 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#9363 = LINE('',#9364,#9365); +#9364 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#9365 = VECTOR('',#9366,1.); +#9366 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9367 = ORIENTED_EDGE('',*,*,#8474,.T.); +#9368 = ORIENTED_EDGE('',*,*,#9329,.F.); +#9369 = ORIENTED_EDGE('',*,*,#9370,.F.); +#9370 = EDGE_CURVE('',#9361,#9330,#9371,.T.); +#9371 = LINE('',#9372,#9373); +#9372 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#9373 = VECTOR('',#9374,1.); +#9374 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9375 = PLANE('',#9376); +#9376 = AXIS2_PLACEMENT_3D('',#9377,#9378,#9379); +#9377 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#9378 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9379 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9380 = ADVANCED_FACE('',(#9381),#9399,.T.); +#9381 = FACE_BOUND('',#9382,.F.); +#9382 = EDGE_LOOP('',(#9383,#9384,#9392,#9398)); +#9383 = ORIENTED_EDGE('',*,*,#9360,.T.); +#9384 = ORIENTED_EDGE('',*,*,#9385,.T.); +#9385 = EDGE_CURVE('',#9361,#9386,#9388,.T.); +#9386 = VERTEX_POINT('',#9387); +#9387 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#9388 = LINE('',#9389,#9390); +#9389 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#9390 = VECTOR('',#9391,1.); +#9391 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9392 = ORIENTED_EDGE('',*,*,#9393,.T.); +#9393 = EDGE_CURVE('',#9386,#8491,#9394,.T.); +#9394 = LINE('',#9395,#9396); +#9395 = CARTESIAN_POINT('',(0.146666666667,0.146666666667,6.473333333333 + )); +#9396 = VECTOR('',#9397,1.); +#9397 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9398 = ORIENTED_EDGE('',*,*,#8490,.F.); +#9399 = PLANE('',#9400); +#9400 = AXIS2_PLACEMENT_3D('',#9401,#9402,#9403); +#9401 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#9402 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9403 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9404 = ADVANCED_FACE('',(#9405),#9416,.T.); +#9405 = FACE_BOUND('',#9406,.F.); +#9406 = EDGE_LOOP('',(#9407,#9408,#9414,#9415)); +#9407 = ORIENTED_EDGE('',*,*,#9393,.F.); +#9408 = ORIENTED_EDGE('',*,*,#9409,.T.); +#9409 = EDGE_CURVE('',#9386,#9338,#9410,.T.); +#9410 = LINE('',#9411,#9412); +#9411 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#9412 = VECTOR('',#9413,1.); +#9413 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9414 = ORIENTED_EDGE('',*,*,#9345,.T.); +#9415 = ORIENTED_EDGE('',*,*,#8513,.F.); +#9416 = PLANE('',#9417); +#9417 = AXIS2_PLACEMENT_3D('',#9418,#9419,#9420); +#9418 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#9419 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9420 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9421 = ADVANCED_FACE('',(#9422),#9447,.T.); +#9422 = FACE_BOUND('',#9423,.F.); +#9423 = EDGE_LOOP('',(#9424,#9432,#9440,#9446)); +#9424 = ORIENTED_EDGE('',*,*,#9425,.T.); +#9425 = EDGE_CURVE('',#8531,#9426,#9428,.T.); +#9426 = VERTEX_POINT('',#9427); +#9427 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#9428 = LINE('',#9429,#9430); +#9429 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#9430 = VECTOR('',#9431,1.); +#9431 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9432 = ORIENTED_EDGE('',*,*,#9433,.T.); +#9433 = EDGE_CURVE('',#9426,#9434,#9436,.T.); +#9434 = VERTEX_POINT('',#9435); +#9435 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#9436 = LINE('',#9437,#9438); +#9437 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#9438 = VECTOR('',#9439,1.); +#9439 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9440 = ORIENTED_EDGE('',*,*,#9441,.T.); +#9441 = EDGE_CURVE('',#9434,#8539,#9442,.T.); +#9442 = LINE('',#9443,#9444); +#9443 = CARTESIAN_POINT('',(2.646666666667,0.146666666667,6.473333333333 + )); +#9444 = VECTOR('',#9445,1.); +#9445 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9446 = ORIENTED_EDGE('',*,*,#8538,.F.); +#9447 = PLANE('',#9448); +#9448 = AXIS2_PLACEMENT_3D('',#9449,#9450,#9451); +#9449 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#9450 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9451 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9452 = ADVANCED_FACE('',(#9453),#9471,.T.); +#9453 = FACE_BOUND('',#9454,.F.); +#9454 = EDGE_LOOP('',(#9455,#9456,#9464,#9470)); +#9455 = ORIENTED_EDGE('',*,*,#9441,.F.); +#9456 = ORIENTED_EDGE('',*,*,#9457,.T.); +#9457 = EDGE_CURVE('',#9434,#9458,#9460,.T.); +#9458 = VERTEX_POINT('',#9459); +#9459 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#9460 = LINE('',#9461,#9462); +#9461 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#9462 = VECTOR('',#9463,1.); +#9463 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9464 = ORIENTED_EDGE('',*,*,#9465,.T.); +#9465 = EDGE_CURVE('',#9458,#8562,#9466,.T.); +#9466 = LINE('',#9467,#9468); +#9467 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#9468 = VECTOR('',#9469,1.); +#9469 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9470 = ORIENTED_EDGE('',*,*,#8561,.F.); +#9471 = PLANE('',#9472); +#9472 = AXIS2_PLACEMENT_3D('',#9473,#9474,#9475); +#9473 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#9474 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9475 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9476 = ADVANCED_FACE('',(#9477),#9495,.F.); +#9477 = FACE_BOUND('',#9478,.T.); +#9478 = EDGE_LOOP('',(#9479,#9487,#9493,#9494)); +#9479 = ORIENTED_EDGE('',*,*,#9480,.F.); +#9480 = EDGE_CURVE('',#9481,#8586,#9483,.T.); +#9481 = VERTEX_POINT('',#9482); +#9482 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#9483 = LINE('',#9484,#9485); +#9484 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#9485 = VECTOR('',#9486,1.); +#9486 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9487 = ORIENTED_EDGE('',*,*,#9488,.T.); +#9488 = EDGE_CURVE('',#9481,#9458,#9489,.T.); +#9489 = LINE('',#9490,#9491); +#9490 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#9491 = VECTOR('',#9492,1.); +#9492 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9493 = ORIENTED_EDGE('',*,*,#9465,.T.); +#9494 = ORIENTED_EDGE('',*,*,#8593,.F.); +#9495 = PLANE('',#9496); +#9496 = AXIS2_PLACEMENT_3D('',#9497,#9498,#9499); +#9497 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#9498 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9499 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9500 = ADVANCED_FACE('',(#9501),#9512,.T.); +#9501 = FACE_BOUND('',#9502,.F.); +#9502 = EDGE_LOOP('',(#9503,#9504,#9505,#9506)); +#9503 = ORIENTED_EDGE('',*,*,#9425,.F.); +#9504 = ORIENTED_EDGE('',*,*,#8611,.T.); +#9505 = ORIENTED_EDGE('',*,*,#9480,.F.); +#9506 = ORIENTED_EDGE('',*,*,#9507,.F.); +#9507 = EDGE_CURVE('',#9426,#9481,#9508,.T.); +#9508 = LINE('',#9509,#9510); +#9509 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#9510 = VECTOR('',#9511,1.); +#9511 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9512 = PLANE('',#9513); +#9513 = AXIS2_PLACEMENT_3D('',#9514,#9515,#9516); +#9514 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#9515 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9516 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9517 = ADVANCED_FACE('',(#9518),#9543,.F.); +#9518 = FACE_BOUND('',#9519,.T.); +#9519 = EDGE_LOOP('',(#9520,#9528,#9536,#9542)); +#9520 = ORIENTED_EDGE('',*,*,#9521,.F.); +#9521 = EDGE_CURVE('',#9522,#8627,#9524,.T.); +#9522 = VERTEX_POINT('',#9523); +#9523 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#9524 = LINE('',#9525,#9526); +#9525 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#9526 = VECTOR('',#9527,1.); +#9527 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9528 = ORIENTED_EDGE('',*,*,#9529,.T.); +#9529 = EDGE_CURVE('',#9522,#9530,#9532,.T.); +#9530 = VERTEX_POINT('',#9531); +#9531 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#9532 = LINE('',#9533,#9534); +#9533 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#9534 = VECTOR('',#9535,1.); +#9535 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9536 = ORIENTED_EDGE('',*,*,#9537,.T.); +#9537 = EDGE_CURVE('',#9530,#8635,#9538,.T.); +#9538 = LINE('',#9539,#9540); +#9539 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#9540 = VECTOR('',#9541,1.); +#9541 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9542 = ORIENTED_EDGE('',*,*,#8634,.F.); +#9543 = PLANE('',#9544); +#9544 = AXIS2_PLACEMENT_3D('',#9545,#9546,#9547); +#9545 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#9546 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9547 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9548 = ADVANCED_FACE('',(#9549),#9567,.T.); +#9549 = FACE_BOUND('',#9550,.F.); +#9550 = EDGE_LOOP('',(#9551,#9559,#9560,#9561)); +#9551 = ORIENTED_EDGE('',*,*,#9552,.F.); +#9552 = EDGE_CURVE('',#8657,#9553,#9555,.T.); +#9553 = VERTEX_POINT('',#9554); +#9554 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#9555 = LINE('',#9556,#9557); +#9556 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#9557 = VECTOR('',#9558,1.); +#9558 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9559 = ORIENTED_EDGE('',*,*,#8666,.T.); +#9560 = ORIENTED_EDGE('',*,*,#9521,.F.); +#9561 = ORIENTED_EDGE('',*,*,#9562,.F.); +#9562 = EDGE_CURVE('',#9553,#9522,#9563,.T.); +#9563 = LINE('',#9564,#9565); +#9564 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#9565 = VECTOR('',#9566,1.); +#9566 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9567 = PLANE('',#9568); +#9568 = AXIS2_PLACEMENT_3D('',#9569,#9570,#9571); +#9569 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#9570 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9571 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9572 = ADVANCED_FACE('',(#9573),#9591,.T.); +#9573 = FACE_BOUND('',#9574,.F.); +#9574 = EDGE_LOOP('',(#9575,#9576,#9584,#9590)); +#9575 = ORIENTED_EDGE('',*,*,#9552,.T.); +#9576 = ORIENTED_EDGE('',*,*,#9577,.T.); +#9577 = EDGE_CURVE('',#9553,#9578,#9580,.T.); +#9578 = VERTEX_POINT('',#9579); +#9579 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#9580 = LINE('',#9581,#9582); +#9581 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#9582 = VECTOR('',#9583,1.); +#9583 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9584 = ORIENTED_EDGE('',*,*,#9585,.T.); +#9585 = EDGE_CURVE('',#9578,#8683,#9586,.T.); +#9586 = LINE('',#9587,#9588); +#9587 = CARTESIAN_POINT('',(5.146666666667,0.146666666667,6.473333333333 + )); +#9588 = VECTOR('',#9589,1.); +#9589 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9590 = ORIENTED_EDGE('',*,*,#8682,.F.); +#9591 = PLANE('',#9592); +#9592 = AXIS2_PLACEMENT_3D('',#9593,#9594,#9595); +#9593 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#9594 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9595 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9596 = ADVANCED_FACE('',(#9597),#9608,.T.); +#9597 = FACE_BOUND('',#9598,.F.); +#9598 = EDGE_LOOP('',(#9599,#9600,#9606,#9607)); +#9599 = ORIENTED_EDGE('',*,*,#9585,.F.); +#9600 = ORIENTED_EDGE('',*,*,#9601,.T.); +#9601 = EDGE_CURVE('',#9578,#9530,#9602,.T.); +#9602 = LINE('',#9603,#9604); +#9603 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#9604 = VECTOR('',#9605,1.); +#9605 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9606 = ORIENTED_EDGE('',*,*,#9537,.T.); +#9607 = ORIENTED_EDGE('',*,*,#8705,.F.); +#9608 = PLANE('',#9609); +#9609 = AXIS2_PLACEMENT_3D('',#9610,#9611,#9612); +#9610 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#9611 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9612 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9613 = ADVANCED_FACE('',(#9614),#9639,.T.); +#9614 = FACE_BOUND('',#9615,.F.); +#9615 = EDGE_LOOP('',(#9616,#9624,#9632,#9638)); +#9616 = ORIENTED_EDGE('',*,*,#9617,.F.); +#9617 = EDGE_CURVE('',#9618,#8722,#9620,.T.); +#9618 = VERTEX_POINT('',#9619); +#9619 = CARTESIAN_POINT('',(7.62,0.12,6.5)); +#9620 = LINE('',#9621,#9622); +#9621 = CARTESIAN_POINT('',(7.646666666667,0.146666666667,6.473333333333 + )); +#9622 = VECTOR('',#9623,1.); +#9623 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#9624 = ORIENTED_EDGE('',*,*,#9625,.T.); +#9625 = EDGE_CURVE('',#9618,#9626,#9628,.T.); +#9626 = VERTEX_POINT('',#9627); +#9627 = CARTESIAN_POINT('',(7.38,0.12,6.5)); +#9628 = LINE('',#9629,#9630); +#9629 = CARTESIAN_POINT('',(7.82,0.12,6.5)); +#9630 = VECTOR('',#9631,1.); +#9631 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9632 = ORIENTED_EDGE('',*,*,#9633,.T.); +#9633 = EDGE_CURVE('',#9626,#8730,#9634,.T.); +#9634 = LINE('',#9635,#9636); +#9635 = CARTESIAN_POINT('',(7.46,4.E-02,6.58)); +#9636 = VECTOR('',#9637,1.); +#9637 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#9638 = ORIENTED_EDGE('',*,*,#8729,.F.); +#9639 = PLANE('',#9640); +#9640 = AXIS2_PLACEMENT_3D('',#9641,#9642,#9643); +#9641 = CARTESIAN_POINT('',(7.82,0.22,6.4)); +#9642 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#9643 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#9644 = ADVANCED_FACE('',(#9645),#9663,.F.); +#9645 = FACE_BOUND('',#9646,.T.); +#9646 = EDGE_LOOP('',(#9647,#9655,#9661,#9662)); +#9647 = ORIENTED_EDGE('',*,*,#9648,.F.); +#9648 = EDGE_CURVE('',#9649,#8754,#9651,.T.); +#9649 = VERTEX_POINT('',#9650); +#9650 = CARTESIAN_POINT('',(7.38,-0.12,6.5)); +#9651 = LINE('',#9652,#9653); +#9652 = CARTESIAN_POINT('',(7.353333333333,-0.146666666667, + 6.473333333333)); +#9653 = VECTOR('',#9654,1.); +#9654 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#9655 = ORIENTED_EDGE('',*,*,#9656,.T.); +#9656 = EDGE_CURVE('',#9649,#9626,#9657,.T.); +#9657 = LINE('',#9658,#9659); +#9658 = CARTESIAN_POINT('',(7.38,-0.32,6.5)); +#9659 = VECTOR('',#9660,1.); +#9660 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9661 = ORIENTED_EDGE('',*,*,#9633,.T.); +#9662 = ORIENTED_EDGE('',*,*,#8761,.F.); +#9663 = PLANE('',#9664); +#9664 = AXIS2_PLACEMENT_3D('',#9665,#9666,#9667); +#9665 = CARTESIAN_POINT('',(7.28,-0.32,6.4)); +#9666 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9667 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#9668 = ADVANCED_FACE('',(#9669),#9687,.T.); +#9669 = FACE_BOUND('',#9670,.F.); +#9670 = EDGE_LOOP('',(#9671,#9679,#9680,#9681)); +#9671 = ORIENTED_EDGE('',*,*,#9672,.F.); +#9672 = EDGE_CURVE('',#8777,#9673,#9675,.T.); +#9673 = VERTEX_POINT('',#9674); +#9674 = CARTESIAN_POINT('',(7.62,-0.12,6.5)); +#9675 = LINE('',#9676,#9677); +#9676 = CARTESIAN_POINT('',(7.753333333333,-0.253333333333, + 6.366666666667)); +#9677 = VECTOR('',#9678,1.); +#9678 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9679 = ORIENTED_EDGE('',*,*,#8786,.T.); +#9680 = ORIENTED_EDGE('',*,*,#9648,.F.); +#9681 = ORIENTED_EDGE('',*,*,#9682,.F.); +#9682 = EDGE_CURVE('',#9673,#9649,#9683,.T.); +#9683 = LINE('',#9684,#9685); +#9684 = CARTESIAN_POINT('',(7.82,-0.12,6.5)); +#9685 = VECTOR('',#9686,1.); +#9686 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9687 = PLANE('',#9688); +#9688 = AXIS2_PLACEMENT_3D('',#9689,#9690,#9691); +#9689 = CARTESIAN_POINT('',(7.82,-0.22,6.4)); +#9690 = DIRECTION('',(-8.833102285013E-17,-0.707106781187,0.707106781187 + )); +#9691 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#9692 = ADVANCED_FACE('',(#9693),#9704,.T.); +#9693 = FACE_BOUND('',#9694,.F.); +#9694 = EDGE_LOOP('',(#9695,#9696,#9702,#9703)); +#9695 = ORIENTED_EDGE('',*,*,#9672,.T.); +#9696 = ORIENTED_EDGE('',*,*,#9697,.T.); +#9697 = EDGE_CURVE('',#9673,#9618,#9698,.T.); +#9698 = LINE('',#9699,#9700); +#9699 = CARTESIAN_POINT('',(7.62,-0.32,6.5)); +#9700 = VECTOR('',#9701,1.); +#9701 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#9702 = ORIENTED_EDGE('',*,*,#9617,.T.); +#9703 = ORIENTED_EDGE('',*,*,#8802,.F.); +#9704 = PLANE('',#9705); +#9705 = AXIS2_PLACEMENT_3D('',#9706,#9707,#9708); +#9706 = CARTESIAN_POINT('',(7.72,-0.32,6.4)); +#9707 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9708 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#9709 = ADVANCED_FACE('',(#9710),#9751,.F.); +#9710 = FACE_BOUND('',#9711,.T.); +#9711 = EDGE_LOOP('',(#9712,#9722,#9730,#9738,#9744,#9745)); +#9712 = ORIENTED_EDGE('',*,*,#9713,.F.); +#9713 = EDGE_CURVE('',#9714,#9716,#9718,.T.); +#9714 = VERTEX_POINT('',#9715); +#9715 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#9716 = VERTEX_POINT('',#9717); +#9717 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#9718 = LINE('',#9719,#9720); +#9719 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#9720 = VECTOR('',#9721,1.); +#9721 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#9722 = ORIENTED_EDGE('',*,*,#9723,.T.); +#9723 = EDGE_CURVE('',#9714,#9724,#9726,.T.); +#9724 = VERTEX_POINT('',#9725); +#9725 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#9726 = LINE('',#9727,#9728); +#9727 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#9728 = VECTOR('',#9729,1.); +#9729 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9730 = ORIENTED_EDGE('',*,*,#9731,.T.); +#9731 = EDGE_CURVE('',#9724,#9732,#9734,.T.); +#9732 = VERTEX_POINT('',#9733); +#9733 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#9734 = LINE('',#9735,#9736); +#9735 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#9736 = VECTOR('',#9737,1.); +#9737 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#9738 = ORIENTED_EDGE('',*,*,#9739,.T.); +#9739 = EDGE_CURVE('',#9732,#8820,#9740,.T.); +#9740 = LINE('',#9741,#9742); +#9741 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#9742 = VECTOR('',#9743,1.); +#9743 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#9744 = ORIENTED_EDGE('',*,*,#8817,.F.); +#9745 = ORIENTED_EDGE('',*,*,#9746,.F.); +#9746 = EDGE_CURVE('',#9716,#8818,#9747,.T.); +#9747 = LINE('',#9748,#9749); +#9748 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#9749 = VECTOR('',#9750,1.); +#9750 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#9751 = PLANE('',#9752); +#9752 = AXIS2_PLACEMENT_3D('',#9753,#9754,#9755); +#9753 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#9754 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9755 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#9756 = ADVANCED_FACE('',(#9757),#9782,.F.); +#9757 = FACE_BOUND('',#9758,.F.); +#9758 = EDGE_LOOP('',(#9759,#9760,#9766,#9767,#9768,#9776)); +#9759 = ORIENTED_EDGE('',*,*,#8946,.F.); +#9760 = ORIENTED_EDGE('',*,*,#9761,.T.); +#9761 = EDGE_CURVE('',#8939,#8859,#9762,.T.); +#9762 = LINE('',#9763,#9764); +#9763 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#9764 = VECTOR('',#9765,1.); +#9765 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9766 = ORIENTED_EDGE('',*,*,#8866,.T.); +#9767 = ORIENTED_EDGE('',*,*,#9746,.F.); +#9768 = ORIENTED_EDGE('',*,*,#9769,.F.); +#9769 = EDGE_CURVE('',#9770,#9716,#9772,.T.); +#9770 = VERTEX_POINT('',#9771); +#9771 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#9772 = LINE('',#9773,#9774); +#9773 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#9774 = VECTOR('',#9775,1.); +#9775 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9776 = ORIENTED_EDGE('',*,*,#9777,.T.); +#9777 = EDGE_CURVE('',#9770,#8905,#9778,.T.); +#9778 = LINE('',#9779,#9780); +#9779 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#9780 = VECTOR('',#9781,1.); +#9781 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#9782 = PLANE('',#9783); +#9783 = AXIS2_PLACEMENT_3D('',#9784,#9785,#9786); +#9784 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#9785 = DIRECTION('',(-1.209660753807E-16,-0.987762965329,0.155962573473 + )); +#9786 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#9787 = ADVANCED_FACE('',(#9788),#9794,.F.); +#9788 = FACE_BOUND('',#9789,.F.); +#9789 = EDGE_LOOP('',(#9790,#9791,#9792,#9793)); +#9790 = ORIENTED_EDGE('',*,*,#8963,.T.); +#9791 = ORIENTED_EDGE('',*,*,#8858,.T.); +#9792 = ORIENTED_EDGE('',*,*,#9761,.F.); +#9793 = ORIENTED_EDGE('',*,*,#8938,.F.); +#9794 = PLANE('',#9795); +#9795 = AXIS2_PLACEMENT_3D('',#9796,#9797,#9798); +#9796 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#9797 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#9798 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#9799 = ADVANCED_FACE('',(#9800),#9811,.F.); +#9800 = FACE_BOUND('',#9801,.F.); +#9801 = EDGE_LOOP('',(#9802,#9808,#9809,#9810)); +#9802 = ORIENTED_EDGE('',*,*,#9803,.T.); +#9803 = EDGE_CURVE('',#8915,#8828,#9804,.T.); +#9804 = LINE('',#9805,#9806); +#9805 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#9806 = VECTOR('',#9807,1.); +#9807 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9808 = ORIENTED_EDGE('',*,*,#8835,.T.); +#9809 = ORIENTED_EDGE('',*,*,#8888,.F.); +#9810 = ORIENTED_EDGE('',*,*,#8922,.F.); +#9811 = PLANE('',#9812); +#9812 = AXIS2_PLACEMENT_3D('',#9813,#9814,#9815); +#9813 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#9814 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#9815 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#9816 = ADVANCED_FACE('',(#9817),#9837,.F.); +#9817 = FACE_BOUND('',#9818,.F.); +#9818 = EDGE_LOOP('',(#9819,#9820,#9828,#9834,#9835,#9836)); +#9819 = ORIENTED_EDGE('',*,*,#8914,.F.); +#9820 = ORIENTED_EDGE('',*,*,#9821,.F.); +#9821 = EDGE_CURVE('',#9822,#8907,#9824,.T.); +#9822 = VERTEX_POINT('',#9823); +#9823 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#9824 = LINE('',#9825,#9826); +#9825 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#9826 = VECTOR('',#9827,1.); +#9827 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#9828 = ORIENTED_EDGE('',*,*,#9829,.T.); +#9829 = EDGE_CURVE('',#9822,#9732,#9830,.T.); +#9830 = LINE('',#9831,#9832); +#9831 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#9832 = VECTOR('',#9833,1.); +#9833 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9834 = ORIENTED_EDGE('',*,*,#9739,.T.); +#9835 = ORIENTED_EDGE('',*,*,#8827,.T.); +#9836 = ORIENTED_EDGE('',*,*,#9803,.F.); +#9837 = PLANE('',#9838); +#9838 = AXIS2_PLACEMENT_3D('',#9839,#9840,#9841); +#9839 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#9840 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473) + ); +#9841 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#9842 = ADVANCED_FACE('',(#9843),#9870,.T.); +#9843 = FACE_BOUND('',#9844,.F.); +#9844 = EDGE_LOOP('',(#9845,#9853,#9861,#9867,#9868,#9869)); +#9845 = ORIENTED_EDGE('',*,*,#9846,.F.); +#9846 = EDGE_CURVE('',#9847,#9770,#9849,.T.); +#9847 = VERTEX_POINT('',#9848); +#9848 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#9849 = LINE('',#9850,#9851); +#9850 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225) + ); +#9851 = VECTOR('',#9852,1.); +#9852 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#9853 = ORIENTED_EDGE('',*,*,#9854,.T.); +#9854 = EDGE_CURVE('',#9847,#9855,#9857,.T.); +#9855 = VERTEX_POINT('',#9856); +#9856 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#9857 = LINE('',#9858,#9859); +#9858 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#9859 = VECTOR('',#9860,1.); +#9860 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9861 = ORIENTED_EDGE('',*,*,#9862,.T.); +#9862 = EDGE_CURVE('',#9855,#9822,#9863,.T.); +#9863 = LINE('',#9864,#9865); +#9864 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#9865 = VECTOR('',#9866,1.); +#9866 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#9867 = ORIENTED_EDGE('',*,*,#9821,.T.); +#9868 = ORIENTED_EDGE('',*,*,#8904,.F.); +#9869 = ORIENTED_EDGE('',*,*,#9777,.F.); +#9870 = PLANE('',#9871); +#9871 = AXIS2_PLACEMENT_3D('',#9872,#9873,#9874); +#9872 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#9873 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9874 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#9875 = ADVANCED_FACE('',(#9876),#9901,.T.); +#9876 = FACE_BOUND('',#9877,.F.); +#9877 = EDGE_LOOP('',(#9878,#9886,#9894,#9900)); +#9878 = ORIENTED_EDGE('',*,*,#9879,.F.); +#9879 = EDGE_CURVE('',#9880,#8978,#9882,.T.); +#9880 = VERTEX_POINT('',#9881); +#9881 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#9882 = LINE('',#9883,#9884); +#9883 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#9884 = VECTOR('',#9885,1.); +#9885 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#9886 = ORIENTED_EDGE('',*,*,#9887,.T.); +#9887 = EDGE_CURVE('',#9880,#9888,#9890,.T.); +#9888 = VERTEX_POINT('',#9889); +#9889 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#9890 = LINE('',#9891,#9892); +#9891 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#9892 = VECTOR('',#9893,1.); +#9893 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9894 = ORIENTED_EDGE('',*,*,#9895,.T.); +#9895 = EDGE_CURVE('',#9888,#8980,#9896,.T.); +#9896 = LINE('',#9897,#9898); +#9897 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#9898 = VECTOR('',#9899,1.); +#9899 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#9900 = ORIENTED_EDGE('',*,*,#8977,.F.); +#9901 = PLANE('',#9902); +#9902 = AXIS2_PLACEMENT_3D('',#9903,#9904,#9905); +#9903 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#9904 = DIRECTION('',(0.707106781187,-8.486018839685E-17,-0.707106781187 + )); +#9905 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#9906 = ADVANCED_FACE('',(#9907),#9925,.T.); +#9907 = FACE_BOUND('',#9908,.T.); +#9908 = EDGE_LOOP('',(#9909,#9910,#9918,#9924)); +#9909 = ORIENTED_EDGE('',*,*,#9879,.F.); +#9910 = ORIENTED_EDGE('',*,*,#9911,.T.); +#9911 = EDGE_CURVE('',#9880,#9912,#9914,.T.); +#9912 = VERTEX_POINT('',#9913); +#9913 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#9914 = LINE('',#9915,#9916); +#9915 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#9916 = VECTOR('',#9917,1.); +#9917 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9918 = ORIENTED_EDGE('',*,*,#9919,.T.); +#9919 = EDGE_CURVE('',#9912,#9011,#9920,.T.); +#9920 = LINE('',#9921,#9922); +#9921 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#9922 = VECTOR('',#9923,1.); +#9923 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9924 = ORIENTED_EDGE('',*,*,#9018,.F.); +#9925 = PLANE('',#9926); +#9926 = AXIS2_PLACEMENT_3D('',#9927,#9928,#9929); +#9927 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#9928 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187) + ); +#9929 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#9930 = ADVANCED_FACE('',(#9931),#9949,.F.); +#9931 = FACE_BOUND('',#9932,.T.); +#9932 = EDGE_LOOP('',(#9933,#9934,#9942,#9948)); +#9933 = ORIENTED_EDGE('',*,*,#9919,.F.); +#9934 = ORIENTED_EDGE('',*,*,#9935,.T.); +#9935 = EDGE_CURVE('',#9912,#9936,#9938,.T.); +#9936 = VERTEX_POINT('',#9937); +#9937 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#9938 = LINE('',#9939,#9940); +#9939 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#9940 = VECTOR('',#9941,1.); +#9941 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9942 = ORIENTED_EDGE('',*,*,#9943,.T.); +#9943 = EDGE_CURVE('',#9936,#9033,#9944,.T.); +#9944 = LINE('',#9945,#9946); +#9945 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#9946 = VECTOR('',#9947,1.); +#9947 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#9948 = ORIENTED_EDGE('',*,*,#9032,.F.); +#9949 = PLANE('',#9950); +#9950 = AXIS2_PLACEMENT_3D('',#9951,#9952,#9953); +#9951 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#9952 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187) + ); +#9953 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#9954 = ADVANCED_FACE('',(#9955),#9966,.T.); +#9955 = FACE_BOUND('',#9956,.F.); +#9956 = EDGE_LOOP('',(#9957,#9958,#9964,#9965)); +#9957 = ORIENTED_EDGE('',*,*,#9895,.F.); +#9958 = ORIENTED_EDGE('',*,*,#9959,.T.); +#9959 = EDGE_CURVE('',#9888,#9936,#9960,.T.); +#9960 = LINE('',#9961,#9962); +#9961 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#9962 = VECTOR('',#9963,1.); +#9963 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#9964 = ORIENTED_EDGE('',*,*,#9943,.T.); +#9965 = ORIENTED_EDGE('',*,*,#9057,.F.); +#9966 = PLANE('',#9967); +#9967 = AXIS2_PLACEMENT_3D('',#9968,#9969,#9970); +#9968 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#9969 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#9970 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#9971 = ADVANCED_FACE('',(#9972),#9997,.F.); +#9972 = FACE_BOUND('',#9973,.T.); +#9973 = EDGE_LOOP('',(#9974,#9982,#9990,#9996)); +#9974 = ORIENTED_EDGE('',*,*,#9975,.F.); +#9975 = EDGE_CURVE('',#9976,#9074,#9978,.T.); +#9976 = VERTEX_POINT('',#9977); +#9977 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#9978 = LINE('',#9979,#9980); +#9979 = CARTESIAN_POINT('',(4.853333333333,0.146666666667, + -3.373333333333)); +#9980 = VECTOR('',#9981,1.); +#9981 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#9982 = ORIENTED_EDGE('',*,*,#9983,.T.); +#9983 = EDGE_CURVE('',#9976,#9984,#9986,.T.); +#9984 = VERTEX_POINT('',#9985); +#9985 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#9986 = LINE('',#9987,#9988); +#9987 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#9988 = VECTOR('',#9989,1.); +#9989 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#9990 = ORIENTED_EDGE('',*,*,#9991,.T.); +#9991 = EDGE_CURVE('',#9984,#9076,#9992,.T.); +#9992 = LINE('',#9993,#9994); +#9993 = CARTESIAN_POINT('',(4.96,-4.E-02,-3.48)); +#9994 = VECTOR('',#9995,1.); +#9995 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#9996 = ORIENTED_EDGE('',*,*,#9073,.F.); +#9997 = PLANE('',#9998); +#9998 = AXIS2_PLACEMENT_3D('',#9999,#10000,#10001); +#9999 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#10000 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#10001 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#10002 = ADVANCED_FACE('',(#10003),#10021,.T.); +#10003 = FACE_BOUND('',#10004,.F.); +#10004 = EDGE_LOOP('',(#10005,#10013,#10019,#10020)); +#10005 = ORIENTED_EDGE('',*,*,#10006,.F.); +#10006 = EDGE_CURVE('',#10007,#9105,#10009,.T.); +#10007 = VERTEX_POINT('',#10008); +#10008 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#10009 = LINE('',#10010,#10011); +#10010 = CARTESIAN_POINT('',(5.146666666667,-0.146666666667, + -3.373333333333)); +#10011 = VECTOR('',#10012,1.); +#10012 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#10013 = ORIENTED_EDGE('',*,*,#10014,.T.); +#10014 = EDGE_CURVE('',#10007,#9984,#10015,.T.); +#10015 = LINE('',#10016,#10017); +#10016 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#10017 = VECTOR('',#10018,1.); +#10018 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10019 = ORIENTED_EDGE('',*,*,#9991,.T.); +#10020 = ORIENTED_EDGE('',*,*,#9112,.F.); +#10021 = PLANE('',#10022); +#10022 = AXIS2_PLACEMENT_3D('',#10023,#10024,#10025); +#10023 = CARTESIAN_POINT('',(5.32,-0.22,-3.3)); +#10024 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#10025 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#10026 = ADVANCED_FACE('',(#10027),#10045,.T.); +#10027 = FACE_BOUND('',#10028,.F.); +#10028 = EDGE_LOOP('',(#10029,#10037,#10043,#10044)); +#10029 = ORIENTED_EDGE('',*,*,#10030,.F.); +#10030 = EDGE_CURVE('',#10031,#9129,#10033,.T.); +#10031 = VERTEX_POINT('',#10032); +#10032 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#10033 = LINE('',#10034,#10035); +#10034 = CARTESIAN_POINT('',(5.253333333333,0.253333333333, + -3.266666666667)); +#10035 = VECTOR('',#10036,1.); +#10036 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#10037 = ORIENTED_EDGE('',*,*,#10038,.T.); +#10038 = EDGE_CURVE('',#10031,#10007,#10039,.T.); +#10039 = LINE('',#10040,#10041); +#10040 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#10041 = VECTOR('',#10042,1.); +#10042 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10043 = ORIENTED_EDGE('',*,*,#10006,.T.); +#10044 = ORIENTED_EDGE('',*,*,#9128,.F.); +#10045 = PLANE('',#10046); +#10046 = AXIS2_PLACEMENT_3D('',#10047,#10048,#10049); +#10047 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#10048 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#10049 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#10050 = ADVANCED_FACE('',(#10051),#10062,.T.); +#10051 = FACE_BOUND('',#10052,.T.); +#10052 = EDGE_LOOP('',(#10053,#10054,#10060,#10061)); +#10053 = ORIENTED_EDGE('',*,*,#10030,.F.); +#10054 = ORIENTED_EDGE('',*,*,#10055,.T.); +#10055 = EDGE_CURVE('',#10031,#9976,#10056,.T.); +#10056 = LINE('',#10057,#10058); +#10057 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#10058 = VECTOR('',#10059,1.); +#10059 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10060 = ORIENTED_EDGE('',*,*,#9975,.T.); +#10061 = ORIENTED_EDGE('',*,*,#9155,.F.); +#10062 = PLANE('',#10063); +#10063 = AXIS2_PLACEMENT_3D('',#10064,#10065,#10066); +#10064 = CARTESIAN_POINT('',(5.32,0.22,-3.3)); +#10065 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#10066 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#10067 = ADVANCED_FACE('',(#10068),#10079,.F.); +#10068 = FACE_BOUND('',#10069,.F.); +#10069 = EDGE_LOOP('',(#10070,#10071,#10072,#10078)); +#10070 = ORIENTED_EDGE('',*,*,#9186,.T.); +#10071 = ORIENTED_EDGE('',*,*,#9234,.T.); +#10072 = ORIENTED_EDGE('',*,*,#10073,.F.); +#10073 = EDGE_CURVE('',#9308,#9235,#10074,.T.); +#10074 = LINE('',#10075,#10076); +#10075 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#10076 = VECTOR('',#10077,1.); +#10077 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10078 = ORIENTED_EDGE('',*,*,#9307,.F.); +#10079 = PLANE('',#10080); +#10080 = AXIS2_PLACEMENT_3D('',#10081,#10082,#10083); +#10081 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#10082 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#10083 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#10084 = ADVANCED_FACE('',(#10085),#10126,.F.); +#10085 = FACE_BOUND('',#10086,.T.); +#10086 = EDGE_LOOP('',(#10087,#10097,#10105,#10113,#10119,#10120)); +#10087 = ORIENTED_EDGE('',*,*,#10088,.F.); +#10088 = EDGE_CURVE('',#10089,#10091,#10093,.T.); +#10089 = VERTEX_POINT('',#10090); +#10090 = CARTESIAN_POINT('',(7.38,0.12,-3.4)); +#10091 = VERTEX_POINT('',#10092); +#10092 = CARTESIAN_POINT('',(7.182447406934,0.351192514695, + -3.202447406934)); +#10093 = LINE('',#10094,#10095); +#10094 = CARTESIAN_POINT('',(7.346150901889,0.159613036666, + -3.366150901889)); +#10095 = VECTOR('',#10096,1.); +#10096 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#10097 = ORIENTED_EDGE('',*,*,#10098,.T.); +#10098 = EDGE_CURVE('',#10089,#10099,#10101,.T.); +#10099 = VERTEX_POINT('',#10100); +#10100 = CARTESIAN_POINT('',(7.38,-0.12,-3.4)); +#10101 = LINE('',#10102,#10103); +#10102 = CARTESIAN_POINT('',(7.38,0.32,-3.4)); +#10103 = VECTOR('',#10104,1.); +#10104 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10105 = ORIENTED_EDGE('',*,*,#10106,.T.); +#10106 = EDGE_CURVE('',#10099,#10107,#10109,.T.); +#10107 = VERTEX_POINT('',#10108); +#10108 = CARTESIAN_POINT('',(7.182447406934,-0.288807485305, + -3.202447406934)); +#10109 = LINE('',#10110,#10111); +#10110 = CARTESIAN_POINT('',(7.461511443392,-5.034896900541E-02, + -3.481511443392)); +#10111 = VECTOR('',#10112,1.); +#10112 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#10113 = ORIENTED_EDGE('',*,*,#10114,.T.); +#10114 = EDGE_CURVE('',#10107,#9203,#10115,.T.); +#10115 = LINE('',#10116,#10117); +#10116 = CARTESIAN_POINT('',(7.414309165527,-0.325417236662, + -3.434309165527)); +#10117 = VECTOR('',#10118,1.); +#10118 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#10119 = ORIENTED_EDGE('',*,*,#9200,.F.); +#10120 = ORIENTED_EDGE('',*,*,#10121,.F.); +#10121 = EDGE_CURVE('',#10091,#9201,#10122,.T.); +#10122 = LINE('',#10123,#10124); +#10123 = CARTESIAN_POINT('',(6.958413132695,0.386566347469, + -2.978413132695)); +#10124 = VECTOR('',#10125,1.); +#10125 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#10126 = PLANE('',#10127); +#10127 = AXIS2_PLACEMENT_3D('',#10128,#10129,#10130); +#10128 = CARTESIAN_POINT('',(7.28,0.32,-3.3)); +#10129 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#10130 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#10131 = ADVANCED_FACE('',(#10132),#10152,.F.); +#10132 = FACE_BOUND('',#10133,.F.); +#10133 = EDGE_LOOP('',(#10134,#10135,#10136,#10137,#10138,#10146)); +#10134 = ORIENTED_EDGE('',*,*,#9315,.F.); +#10135 = ORIENTED_EDGE('',*,*,#10073,.T.); +#10136 = ORIENTED_EDGE('',*,*,#9242,.T.); +#10137 = ORIENTED_EDGE('',*,*,#10121,.F.); +#10138 = ORIENTED_EDGE('',*,*,#10139,.F.); +#10139 = EDGE_CURVE('',#10140,#10091,#10142,.T.); +#10140 = VERTEX_POINT('',#10141); +#10141 = CARTESIAN_POINT('',(7.817552593066,0.351192514695, + -3.202447406934)); +#10142 = LINE('',#10143,#10144); +#10143 = CARTESIAN_POINT('',(7.82,0.351192514695,-3.202447406934)); +#10144 = VECTOR('',#10145,1.); +#10145 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10146 = ORIENTED_EDGE('',*,*,#10147,.T.); +#10147 = EDGE_CURVE('',#10140,#9281,#10148,.T.); +#10148 = LINE('',#10149,#10150); +#10149 = CARTESIAN_POINT('',(8.199616963064,0.411518467852, + -2.820383036936)); +#10150 = VECTOR('',#10151,1.); +#10151 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#10152 = PLANE('',#10153); +#10153 = AXIS2_PLACEMENT_3D('',#10154,#10155,#10156); +#10154 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#10155 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#10156 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#10157 = ADVANCED_FACE('',(#10158),#10169,.F.); +#10158 = FACE_BOUND('',#10159,.F.); +#10159 = EDGE_LOOP('',(#10160,#10166,#10167,#10168)); +#10160 = ORIENTED_EDGE('',*,*,#10161,.T.); +#10161 = EDGE_CURVE('',#9291,#9211,#10162,.T.); +#10162 = LINE('',#10163,#10164); +#10163 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#10164 = VECTOR('',#10165,1.); +#10165 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10166 = ORIENTED_EDGE('',*,*,#9218,.T.); +#10167 = ORIENTED_EDGE('',*,*,#9264,.F.); +#10168 = ORIENTED_EDGE('',*,*,#9298,.F.); +#10169 = PLANE('',#10170); +#10170 = AXIS2_PLACEMENT_3D('',#10171,#10172,#10173); +#10171 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#10172 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#10173 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#10174 = ADVANCED_FACE('',(#10175),#10195,.F.); +#10175 = FACE_BOUND('',#10176,.F.); +#10176 = EDGE_LOOP('',(#10177,#10178,#10186,#10192,#10193,#10194)); +#10177 = ORIENTED_EDGE('',*,*,#9290,.F.); +#10178 = ORIENTED_EDGE('',*,*,#10179,.F.); +#10179 = EDGE_CURVE('',#10180,#9283,#10182,.T.); +#10180 = VERTEX_POINT('',#10181); +#10181 = CARTESIAN_POINT('',(7.817552593066,-0.288807485305, + -3.202447406934)); +#10182 = LINE('',#10183,#10184); +#10183 = CARTESIAN_POINT('',(7.743720930233,-0.300465116279, + -3.276279069767)); +#10184 = VECTOR('',#10185,1.); +#10185 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#10186 = ORIENTED_EDGE('',*,*,#10187,.T.); +#10187 = EDGE_CURVE('',#10180,#10107,#10188,.T.); +#10188 = LINE('',#10189,#10190); +#10189 = CARTESIAN_POINT('',(7.82,-0.288807485305,-3.202447406934)); +#10190 = VECTOR('',#10191,1.); +#10191 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10192 = ORIENTED_EDGE('',*,*,#10114,.T.); +#10193 = ORIENTED_EDGE('',*,*,#9210,.T.); +#10194 = ORIENTED_EDGE('',*,*,#10161,.F.); +#10195 = PLANE('',#10196); +#10196 = AXIS2_PLACEMENT_3D('',#10197,#10198,#10199); +#10197 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#10198 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#10199 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#10200 = ADVANCED_FACE('',(#10201),#10228,.T.); +#10201 = FACE_BOUND('',#10202,.F.); +#10202 = EDGE_LOOP('',(#10203,#10211,#10219,#10225,#10226,#10227)); +#10203 = ORIENTED_EDGE('',*,*,#10204,.F.); +#10204 = EDGE_CURVE('',#10205,#10140,#10207,.T.); +#10205 = VERTEX_POINT('',#10206); +#10206 = CARTESIAN_POINT('',(7.62,0.12,-3.4)); +#10207 = LINE('',#10208,#10209); +#10208 = CARTESIAN_POINT('',(7.74881689775,0.270752273427,-3.27118310225 + )); +#10209 = VECTOR('',#10210,1.); +#10210 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#10211 = ORIENTED_EDGE('',*,*,#10212,.T.); +#10212 = EDGE_CURVE('',#10205,#10213,#10215,.T.); +#10213 = VERTEX_POINT('',#10214); +#10214 = CARTESIAN_POINT('',(7.62,-0.12,-3.4)); +#10215 = LINE('',#10216,#10217); +#10216 = CARTESIAN_POINT('',(7.62,0.32,-3.4)); +#10217 = VECTOR('',#10218,1.); +#10218 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10219 = ORIENTED_EDGE('',*,*,#10220,.T.); +#10220 = EDGE_CURVE('',#10213,#10180,#10221,.T.); +#10221 = LINE('',#10222,#10223); +#10222 = CARTESIAN_POINT('',(7.655697812072,-0.150503562587, + -3.364302187928)); +#10223 = VECTOR('',#10224,1.); +#10224 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#10225 = ORIENTED_EDGE('',*,*,#10179,.T.); +#10226 = ORIENTED_EDGE('',*,*,#9280,.F.); +#10227 = ORIENTED_EDGE('',*,*,#10147,.F.); +#10228 = PLANE('',#10229); +#10229 = AXIS2_PLACEMENT_3D('',#10230,#10231,#10232); +#10230 = CARTESIAN_POINT('',(7.72,0.32,-3.3)); +#10231 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#10232 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#10233 = ADVANCED_FACE('',(#10234),#10240,.F.); +#10234 = FACE_BOUND('',#10235,.F.); +#10235 = EDGE_LOOP('',(#10236,#10237,#10238,#10239)); +#10236 = ORIENTED_EDGE('',*,*,#9409,.F.); +#10237 = ORIENTED_EDGE('',*,*,#9385,.F.); +#10238 = ORIENTED_EDGE('',*,*,#9370,.T.); +#10239 = ORIENTED_EDGE('',*,*,#9337,.T.); +#10240 = PLANE('',#10241); +#10241 = AXIS2_PLACEMENT_3D('',#10242,#10243,#10244); +#10242 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#10243 = DIRECTION('',(-0.,0.,-1.)); +#10244 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10245 = ADVANCED_FACE('',(#10246),#10252,.F.); +#10246 = FACE_BOUND('',#10247,.F.); +#10247 = EDGE_LOOP('',(#10248,#10249,#10250,#10251)); +#10248 = ORIENTED_EDGE('',*,*,#9457,.F.); +#10249 = ORIENTED_EDGE('',*,*,#9433,.F.); +#10250 = ORIENTED_EDGE('',*,*,#9507,.T.); +#10251 = ORIENTED_EDGE('',*,*,#9488,.T.); +#10252 = PLANE('',#10253); +#10253 = AXIS2_PLACEMENT_3D('',#10254,#10255,#10256); +#10254 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#10255 = DIRECTION('',(-0.,0.,-1.)); +#10256 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10257 = ADVANCED_FACE('',(#10258),#10264,.F.); +#10258 = FACE_BOUND('',#10259,.F.); +#10259 = EDGE_LOOP('',(#10260,#10261,#10262,#10263)); +#10260 = ORIENTED_EDGE('',*,*,#9601,.F.); +#10261 = ORIENTED_EDGE('',*,*,#9577,.F.); +#10262 = ORIENTED_EDGE('',*,*,#9562,.T.); +#10263 = ORIENTED_EDGE('',*,*,#9529,.T.); +#10264 = PLANE('',#10265); +#10265 = AXIS2_PLACEMENT_3D('',#10266,#10267,#10268); +#10266 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#10267 = DIRECTION('',(-0.,0.,-1.)); +#10268 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10269 = ADVANCED_FACE('',(#10270),#10276,.F.); +#10270 = FACE_BOUND('',#10271,.F.); +#10271 = EDGE_LOOP('',(#10272,#10273,#10274,#10275)); +#10272 = ORIENTED_EDGE('',*,*,#9625,.F.); +#10273 = ORIENTED_EDGE('',*,*,#9697,.F.); +#10274 = ORIENTED_EDGE('',*,*,#9682,.T.); +#10275 = ORIENTED_EDGE('',*,*,#9656,.T.); +#10276 = PLANE('',#10277); +#10277 = AXIS2_PLACEMENT_3D('',#10278,#10279,#10280); +#10278 = CARTESIAN_POINT('',(7.82,-0.32,6.5)); +#10279 = DIRECTION('',(-0.,0.,-1.)); +#10280 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#10281 = ADVANCED_FACE('',(#10282),#10293,.T.); +#10282 = FACE_BOUND('',#10283,.T.); +#10283 = EDGE_LOOP('',(#10284,#10285,#10291,#10292)); +#10284 = ORIENTED_EDGE('',*,*,#9846,.F.); +#10285 = ORIENTED_EDGE('',*,*,#10286,.T.); +#10286 = EDGE_CURVE('',#9847,#9714,#10287,.T.); +#10287 = LINE('',#10288,#10289); +#10288 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#10289 = VECTOR('',#10290,1.); +#10290 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10291 = ORIENTED_EDGE('',*,*,#9713,.T.); +#10292 = ORIENTED_EDGE('',*,*,#9769,.F.); +#10293 = PLANE('',#10294); +#10294 = AXIS2_PLACEMENT_3D('',#10295,#10296,#10297); +#10295 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#10296 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#10297 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#10298 = ADVANCED_FACE('',(#10299),#10310,.F.); +#10299 = FACE_BOUND('',#10300,.F.); +#10300 = EDGE_LOOP('',(#10301,#10302,#10303,#10304)); +#10301 = ORIENTED_EDGE('',*,*,#9854,.F.); +#10302 = ORIENTED_EDGE('',*,*,#10286,.T.); +#10303 = ORIENTED_EDGE('',*,*,#9723,.T.); +#10304 = ORIENTED_EDGE('',*,*,#10305,.F.); +#10305 = EDGE_CURVE('',#9855,#9724,#10306,.T.); +#10306 = LINE('',#10307,#10308); +#10307 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#10308 = VECTOR('',#10309,1.); +#10309 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10310 = PLANE('',#10311); +#10311 = AXIS2_PLACEMENT_3D('',#10312,#10313,#10314); +#10312 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#10313 = DIRECTION('',(0.,0.,1.)); +#10314 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10315 = ADVANCED_FACE('',(#10316),#10322,.T.); +#10316 = FACE_BOUND('',#10317,.F.); +#10317 = EDGE_LOOP('',(#10318,#10319,#10320,#10321)); +#10318 = ORIENTED_EDGE('',*,*,#9862,.F.); +#10319 = ORIENTED_EDGE('',*,*,#10305,.T.); +#10320 = ORIENTED_EDGE('',*,*,#9731,.T.); +#10321 = ORIENTED_EDGE('',*,*,#9829,.F.); +#10322 = PLANE('',#10323); +#10323 = AXIS2_PLACEMENT_3D('',#10324,#10325,#10326); +#10324 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#10325 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#10326 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#10327 = ADVANCED_FACE('',(#10328),#10334,.F.); +#10328 = FACE_BOUND('',#10329,.F.); +#10329 = EDGE_LOOP('',(#10330,#10331,#10332,#10333)); +#10330 = ORIENTED_EDGE('',*,*,#9959,.F.); +#10331 = ORIENTED_EDGE('',*,*,#9887,.F.); +#10332 = ORIENTED_EDGE('',*,*,#9911,.T.); +#10333 = ORIENTED_EDGE('',*,*,#9935,.T.); +#10334 = PLANE('',#10335); +#10335 = AXIS2_PLACEMENT_3D('',#10336,#10337,#10338); +#10336 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#10337 = DIRECTION('',(0.,0.,1.)); +#10338 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10339 = ADVANCED_FACE('',(#10340),#10346,.F.); +#10340 = FACE_BOUND('',#10341,.F.); +#10341 = EDGE_LOOP('',(#10342,#10343,#10344,#10345)); +#10342 = ORIENTED_EDGE('',*,*,#10014,.F.); +#10343 = ORIENTED_EDGE('',*,*,#10038,.F.); +#10344 = ORIENTED_EDGE('',*,*,#10055,.T.); +#10345 = ORIENTED_EDGE('',*,*,#9983,.T.); +#10346 = PLANE('',#10347); +#10347 = AXIS2_PLACEMENT_3D('',#10348,#10349,#10350); +#10348 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#10349 = DIRECTION('',(0.,0.,1.)); +#10350 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10351 = ADVANCED_FACE('',(#10352),#10363,.T.); +#10352 = FACE_BOUND('',#10353,.T.); +#10353 = EDGE_LOOP('',(#10354,#10355,#10361,#10362)); +#10354 = ORIENTED_EDGE('',*,*,#10204,.F.); +#10355 = ORIENTED_EDGE('',*,*,#10356,.T.); +#10356 = EDGE_CURVE('',#10205,#10089,#10357,.T.); +#10357 = LINE('',#10358,#10359); +#10358 = CARTESIAN_POINT('',(7.82,0.12,-3.4)); +#10359 = VECTOR('',#10360,1.); +#10360 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10361 = ORIENTED_EDGE('',*,*,#10088,.T.); +#10362 = ORIENTED_EDGE('',*,*,#10139,.F.); +#10363 = PLANE('',#10364); +#10364 = AXIS2_PLACEMENT_3D('',#10365,#10366,#10367); +#10365 = CARTESIAN_POINT('',(7.82,0.235596257347,-3.301223703467)); +#10366 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#10367 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#10368 = ADVANCED_FACE('',(#10369),#10380,.F.); +#10369 = FACE_BOUND('',#10370,.F.); +#10370 = EDGE_LOOP('',(#10371,#10372,#10373,#10374)); +#10371 = ORIENTED_EDGE('',*,*,#10212,.F.); +#10372 = ORIENTED_EDGE('',*,*,#10356,.T.); +#10373 = ORIENTED_EDGE('',*,*,#10098,.T.); +#10374 = ORIENTED_EDGE('',*,*,#10375,.F.); +#10375 = EDGE_CURVE('',#10213,#10099,#10376,.T.); +#10376 = LINE('',#10377,#10378); +#10377 = CARTESIAN_POINT('',(7.82,-0.12,-3.4)); +#10378 = VECTOR('',#10379,1.); +#10379 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#10380 = PLANE('',#10381); +#10381 = AXIS2_PLACEMENT_3D('',#10382,#10383,#10384); +#10382 = CARTESIAN_POINT('',(7.82,0.32,-3.4)); +#10383 = DIRECTION('',(0.,0.,1.)); +#10384 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#10385 = ADVANCED_FACE('',(#10386),#10392,.T.); +#10386 = FACE_BOUND('',#10387,.F.); +#10387 = EDGE_LOOP('',(#10388,#10389,#10390,#10391)); +#10388 = ORIENTED_EDGE('',*,*,#10220,.F.); +#10389 = ORIENTED_EDGE('',*,*,#10375,.T.); +#10390 = ORIENTED_EDGE('',*,*,#10106,.T.); +#10391 = ORIENTED_EDGE('',*,*,#10187,.F.); +#10392 = PLANE('',#10393); +#10393 = AXIS2_PLACEMENT_3D('',#10394,#10395,#10396); +#10394 = CARTESIAN_POINT('',(7.82,-0.204403742653,-3.301223703467)); +#10395 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#10396 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#10397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10401)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#10398,#10399,#10400)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#10398 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#10399 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#10400 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#10401 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#10398, + 'distance_accuracy_value','confusion accuracy'); +#10402 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10403,#10405); +#10403 = ( REPRESENTATION_RELATIONSHIP('','',#6201,#6178) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10404) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10404 = ITEM_DEFINED_TRANSFORMATION('','',#11,#6179); +#10405 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10406); +#10406 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','=>[0:1:1:9]','',#6173,#6196 + ,$); +#10407 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#6198)); +#10408 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10409,#10411); +#10409 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10410) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10410 = ITEM_DEFINED_TRANSFORMATION('','',#11,#35); +#10411 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10412); +#10412 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','Ren2','',#5,#523,$); +#10413 = SHAPE_DEFINITION_REPRESENTATION(#10414,#10420); +#10414 = PRODUCT_DEFINITION_SHAPE('','',#10415); +#10415 = PRODUCT_DEFINITION('design','',#10416,#10419); +#10416 = PRODUCT_DEFINITION_FORMATION('','',#10417); +#10417 = PRODUCT('LED_0805_2012Metric','LED_0805_2012Metric','',(#10418) + ); +#10418 = PRODUCT_CONTEXT('',#2,'mechanical'); +#10419 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10420 = SHAPE_REPRESENTATION('',(#11,#10421),#10425); +#10421 = AXIS2_PLACEMENT_3D('',#10422,#10423,#10424); +#10422 = CARTESIAN_POINT('',(0.,0.,0.)); +#10423 = DIRECTION('',(0.,0.,1.)); +#10424 = DIRECTION('',(1.,0.,-0.)); +#10425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10429)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#10426,#10427,#10428)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#10426 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#10427 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#10428 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#10429 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#10426, + 'distance_accuracy_value','confusion accuracy'); +#10430 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10431,#10433); +#10431 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10432) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10432 = ITEM_DEFINED_TRANSFORMATION('','',#11,#39); +#10433 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10434); +#10434 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','DB2','',#5,#10415,$); +#10435 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#10417)); +#10436 = SHAPE_DEFINITION_REPRESENTATION(#10437,#10443); +#10437 = PRODUCT_DEFINITION_SHAPE('','',#10438); +#10438 = PRODUCT_DEFINITION('design','',#10439,#10442); +#10439 = PRODUCT_DEFINITION_FORMATION('','',#10440); +#10440 = PRODUCT('LED_0805_2012Metric','LED_0805_2012Metric','',(#10441) + ); +#10441 = PRODUCT_CONTEXT('',#2,'mechanical'); +#10442 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10443 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#10444),#11967); +#10444 = MANIFOLD_SOLID_BREP('',#10445); +#10445 = CLOSED_SHELL('',(#10446,#10486,#10533,#10612,#10636,#10676, + #10707,#10724,#10757,#10781,#10848,#10969,#11036,#11060,#11091, + #11124,#11180,#11204,#11228,#11252,#11285,#11297,#11360,#11385, + #11402,#11426,#11444,#11462,#11480,#11497,#11514,#11545,#11570, + #11595,#11619,#11636,#11667,#11691,#11708,#11736,#11761,#11785, + #11810,#11857,#11874,#11886,#11908,#11920,#11938,#11956)); +#10446 = ADVANCED_FACE('',(#10447),#10481,.F.); +#10447 = FACE_BOUND('',#10448,.F.); +#10448 = EDGE_LOOP('',(#10449,#10459,#10467,#10475)); +#10449 = ORIENTED_EDGE('',*,*,#10450,.T.); +#10450 = EDGE_CURVE('',#10451,#10453,#10455,.T.); +#10451 = VERTEX_POINT('',#10452); +#10452 = CARTESIAN_POINT('',(-0.65,-0.625,0.465)); +#10453 = VERTEX_POINT('',#10454); +#10454 = CARTESIAN_POINT('',(-0.585,-0.625,1.1)); +#10455 = LINE('',#10456,#10457); +#10456 = CARTESIAN_POINT('',(-0.65,-0.625,0.465)); +#10457 = VECTOR('',#10458,1.); +#10458 = DIRECTION('',(0.101830105936,0.,0.994801804142)); +#10459 = ORIENTED_EDGE('',*,*,#10460,.T.); +#10460 = EDGE_CURVE('',#10453,#10461,#10463,.T.); +#10461 = VERTEX_POINT('',#10462); +#10462 = CARTESIAN_POINT('',(0.585,-0.625,1.1)); +#10463 = LINE('',#10464,#10465); +#10464 = CARTESIAN_POINT('',(-0.585,-0.625,1.1)); +#10465 = VECTOR('',#10466,1.); +#10466 = DIRECTION('',(1.,0.,0.)); +#10467 = ORIENTED_EDGE('',*,*,#10468,.T.); +#10468 = EDGE_CURVE('',#10461,#10469,#10471,.T.); +#10469 = VERTEX_POINT('',#10470); +#10470 = CARTESIAN_POINT('',(0.65,-0.625,0.465)); +#10471 = LINE('',#10472,#10473); +#10472 = CARTESIAN_POINT('',(0.585,-0.625,1.1)); +#10473 = VECTOR('',#10474,1.); +#10474 = DIRECTION('',(0.101830105936,0.,-0.994801804142)); +#10475 = ORIENTED_EDGE('',*,*,#10476,.T.); +#10476 = EDGE_CURVE('',#10469,#10451,#10477,.T.); +#10477 = LINE('',#10478,#10479); +#10478 = CARTESIAN_POINT('',(0.65,-0.625,0.465)); +#10479 = VECTOR('',#10480,1.); +#10480 = DIRECTION('',(-1.,0.,-4.270088556251E-17)); +#10481 = PLANE('',#10482); +#10482 = AXIS2_PLACEMENT_3D('',#10483,#10484,#10485); +#10483 = CARTESIAN_POINT('',(1.481626402817E-17,-0.625,0.771483451357)); +#10484 = DIRECTION('',(-5.57234551408E-33,1.,3.18580557984E-32)); +#10485 = DIRECTION('',(0.,-3.18580557984E-32,1.)); +#10486 = ADVANCED_FACE('',(#10487),#10528,.T.); +#10487 = FACE_BOUND('',#10488,.T.); +#10488 = EDGE_LOOP('',(#10489,#10499,#10507,#10513,#10514,#10522)); +#10489 = ORIENTED_EDGE('',*,*,#10490,.T.); +#10490 = EDGE_CURVE('',#10491,#10493,#10495,.T.); +#10491 = VERTEX_POINT('',#10492); +#10492 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10493 = VERTEX_POINT('',#10494); +#10494 = CARTESIAN_POINT('',(-0.65,0.46875,0.465)); +#10495 = LINE('',#10496,#10497); +#10496 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10497 = VECTOR('',#10498,1.); +#10498 = DIRECTION('',(0.,-1.,0.)); +#10499 = ORIENTED_EDGE('',*,*,#10500,.F.); +#10500 = EDGE_CURVE('',#10501,#10493,#10503,.T.); +#10501 = VERTEX_POINT('',#10502); +#10502 = CARTESIAN_POINT('',(-0.65,-0.46875,0.465)); +#10503 = LINE('',#10504,#10505); +#10504 = CARTESIAN_POINT('',(-0.65,-0.625,0.465)); +#10505 = VECTOR('',#10506,1.); +#10506 = DIRECTION('',(0.,1.,0.)); +#10507 = ORIENTED_EDGE('',*,*,#10508,.T.); +#10508 = EDGE_CURVE('',#10501,#10451,#10509,.T.); +#10509 = LINE('',#10510,#10511); +#10510 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10511 = VECTOR('',#10512,1.); +#10512 = DIRECTION('',(0.,-1.,0.)); +#10513 = ORIENTED_EDGE('',*,*,#10450,.T.); +#10514 = ORIENTED_EDGE('',*,*,#10515,.F.); +#10515 = EDGE_CURVE('',#10516,#10453,#10518,.T.); +#10516 = VERTEX_POINT('',#10517); +#10517 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10518 = LINE('',#10519,#10520); +#10519 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10520 = VECTOR('',#10521,1.); +#10521 = DIRECTION('',(0.,-1.,0.)); +#10522 = ORIENTED_EDGE('',*,*,#10523,.F.); +#10523 = EDGE_CURVE('',#10491,#10516,#10524,.T.); +#10524 = LINE('',#10525,#10526); +#10525 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10526 = VECTOR('',#10527,1.); +#10527 = DIRECTION('',(0.101830105936,0.,0.994801804142)); +#10528 = PLANE('',#10529); +#10529 = AXIS2_PLACEMENT_3D('',#10530,#10531,#10532); +#10530 = CARTESIAN_POINT('',(-0.65,0.625,0.465)); +#10531 = DIRECTION('',(-0.994801804142,0.,0.101830105936)); +#10532 = DIRECTION('',(0.101830105936,0.,0.994801804142)); +#10533 = ADVANCED_FACE('',(#10534),#10607,.F.); +#10534 = FACE_BOUND('',#10535,.F.); +#10535 = EDGE_LOOP('',(#10536,#10546,#10554,#10562,#10568,#10569,#10577, + #10585,#10593,#10601)); +#10536 = ORIENTED_EDGE('',*,*,#10537,.F.); +#10537 = EDGE_CURVE('',#10538,#10540,#10542,.T.); +#10538 = VERTEX_POINT('',#10539); +#10539 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10540 = VERTEX_POINT('',#10541); +#10541 = CARTESIAN_POINT('',(-0.9125,-0.625,3.5E-02)); +#10542 = LINE('',#10543,#10544); +#10543 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10544 = VECTOR('',#10545,1.); +#10545 = DIRECTION('',(1.,0.,0.)); +#10546 = ORIENTED_EDGE('',*,*,#10547,.T.); +#10547 = EDGE_CURVE('',#10538,#10548,#10550,.T.); +#10548 = VERTEX_POINT('',#10549); +#10549 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10550 = LINE('',#10551,#10552); +#10551 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10552 = VECTOR('',#10553,1.); +#10553 = DIRECTION('',(0.,0.,1.)); +#10554 = ORIENTED_EDGE('',*,*,#10555,.T.); +#10555 = EDGE_CURVE('',#10548,#10556,#10558,.T.); +#10556 = VERTEX_POINT('',#10557); +#10557 = CARTESIAN_POINT('',(-0.9125,-0.625,0.465)); +#10558 = LINE('',#10559,#10560); +#10559 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10560 = VECTOR('',#10561,1.); +#10561 = DIRECTION('',(1.,0.,0.)); +#10562 = ORIENTED_EDGE('',*,*,#10563,.T.); +#10563 = EDGE_CURVE('',#10556,#10451,#10564,.T.); +#10564 = LINE('',#10565,#10566); +#10565 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10566 = VECTOR('',#10567,1.); +#10567 = DIRECTION('',(1.,0.,0.)); +#10568 = ORIENTED_EDGE('',*,*,#10476,.F.); +#10569 = ORIENTED_EDGE('',*,*,#10570,.T.); +#10570 = EDGE_CURVE('',#10469,#10571,#10573,.T.); +#10571 = VERTEX_POINT('',#10572); +#10572 = CARTESIAN_POINT('',(0.9125,-0.625,0.465)); +#10573 = LINE('',#10574,#10575); +#10574 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10575 = VECTOR('',#10576,1.); +#10576 = DIRECTION('',(1.,0.,0.)); +#10577 = ORIENTED_EDGE('',*,*,#10578,.T.); +#10578 = EDGE_CURVE('',#10571,#10579,#10581,.T.); +#10579 = VERTEX_POINT('',#10580); +#10580 = CARTESIAN_POINT('',(0.965,-0.625,0.465)); +#10581 = LINE('',#10582,#10583); +#10582 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10583 = VECTOR('',#10584,1.); +#10584 = DIRECTION('',(1.,0.,0.)); +#10585 = ORIENTED_EDGE('',*,*,#10586,.F.); +#10586 = EDGE_CURVE('',#10587,#10579,#10589,.T.); +#10587 = VERTEX_POINT('',#10588); +#10588 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#10589 = LINE('',#10590,#10591); +#10590 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#10591 = VECTOR('',#10592,1.); +#10592 = DIRECTION('',(0.,0.,1.)); +#10593 = ORIENTED_EDGE('',*,*,#10594,.F.); +#10594 = EDGE_CURVE('',#10595,#10587,#10597,.T.); +#10595 = VERTEX_POINT('',#10596); +#10596 = CARTESIAN_POINT('',(0.9125,-0.625,3.5E-02)); +#10597 = LINE('',#10598,#10599); +#10598 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10599 = VECTOR('',#10600,1.); +#10600 = DIRECTION('',(1.,0.,0.)); +#10601 = ORIENTED_EDGE('',*,*,#10602,.F.); +#10602 = EDGE_CURVE('',#10540,#10595,#10603,.T.); +#10603 = LINE('',#10604,#10605); +#10604 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10605 = VECTOR('',#10606,1.); +#10606 = DIRECTION('',(1.,0.,0.)); +#10607 = PLANE('',#10608); +#10608 = AXIS2_PLACEMENT_3D('',#10609,#10610,#10611); +#10609 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10610 = DIRECTION('',(0.,1.,0.)); +#10611 = DIRECTION('',(0.,-0.,1.)); +#10612 = ADVANCED_FACE('',(#10613),#10631,.T.); +#10613 = FACE_BOUND('',#10614,.T.); +#10614 = EDGE_LOOP('',(#10615,#10616,#10617,#10625)); +#10615 = ORIENTED_EDGE('',*,*,#10515,.T.); +#10616 = ORIENTED_EDGE('',*,*,#10460,.T.); +#10617 = ORIENTED_EDGE('',*,*,#10618,.F.); +#10618 = EDGE_CURVE('',#10619,#10461,#10621,.T.); +#10619 = VERTEX_POINT('',#10620); +#10620 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10621 = LINE('',#10622,#10623); +#10622 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10623 = VECTOR('',#10624,1.); +#10624 = DIRECTION('',(0.,-1.,0.)); +#10625 = ORIENTED_EDGE('',*,*,#10626,.F.); +#10626 = EDGE_CURVE('',#10516,#10619,#10627,.T.); +#10627 = LINE('',#10628,#10629); +#10628 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10629 = VECTOR('',#10630,1.); +#10630 = DIRECTION('',(1.,0.,0.)); +#10631 = PLANE('',#10632); +#10632 = AXIS2_PLACEMENT_3D('',#10633,#10634,#10635); +#10633 = CARTESIAN_POINT('',(-0.585,0.625,1.1)); +#10634 = DIRECTION('',(0.,0.,1.)); +#10635 = DIRECTION('',(1.,0.,-0.)); +#10636 = ADVANCED_FACE('',(#10637),#10671,.T.); +#10637 = FACE_BOUND('',#10638,.T.); +#10638 = EDGE_LOOP('',(#10639,#10640,#10641,#10649,#10657,#10665)); +#10639 = ORIENTED_EDGE('',*,*,#10618,.T.); +#10640 = ORIENTED_EDGE('',*,*,#10468,.T.); +#10641 = ORIENTED_EDGE('',*,*,#10642,.F.); +#10642 = EDGE_CURVE('',#10643,#10469,#10645,.T.); +#10643 = VERTEX_POINT('',#10644); +#10644 = CARTESIAN_POINT('',(0.65,-0.46875,0.465)); +#10645 = LINE('',#10646,#10647); +#10646 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10647 = VECTOR('',#10648,1.); +#10648 = DIRECTION('',(0.,-1.,0.)); +#10649 = ORIENTED_EDGE('',*,*,#10650,.F.); +#10650 = EDGE_CURVE('',#10651,#10643,#10653,.T.); +#10651 = VERTEX_POINT('',#10652); +#10652 = CARTESIAN_POINT('',(0.65,0.46875,0.465)); +#10653 = LINE('',#10654,#10655); +#10654 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10655 = VECTOR('',#10656,1.); +#10656 = DIRECTION('',(0.,-1.,0.)); +#10657 = ORIENTED_EDGE('',*,*,#10658,.F.); +#10658 = EDGE_CURVE('',#10659,#10651,#10661,.T.); +#10659 = VERTEX_POINT('',#10660); +#10660 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10661 = LINE('',#10662,#10663); +#10662 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10663 = VECTOR('',#10664,1.); +#10664 = DIRECTION('',(0.,-1.,0.)); +#10665 = ORIENTED_EDGE('',*,*,#10666,.F.); +#10666 = EDGE_CURVE('',#10619,#10659,#10667,.T.); +#10667 = LINE('',#10668,#10669); +#10668 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10669 = VECTOR('',#10670,1.); +#10670 = DIRECTION('',(0.101830105936,0.,-0.994801804142)); +#10671 = PLANE('',#10672); +#10672 = AXIS2_PLACEMENT_3D('',#10673,#10674,#10675); +#10673 = CARTESIAN_POINT('',(0.585,0.625,1.1)); +#10674 = DIRECTION('',(0.994801804142,0.,0.101830105936)); +#10675 = DIRECTION('',(0.101830105936,0.,-0.994801804142)); +#10676 = ADVANCED_FACE('',(#10677),#10702,.T.); +#10677 = FACE_BOUND('',#10678,.T.); +#10678 = EDGE_LOOP('',(#10679,#10687,#10695,#10701)); +#10679 = ORIENTED_EDGE('',*,*,#10680,.F.); +#10680 = EDGE_CURVE('',#10681,#10491,#10683,.T.); +#10681 = VERTEX_POINT('',#10682); +#10682 = CARTESIAN_POINT('',(-0.9125,0.625,0.465)); +#10683 = LINE('',#10684,#10685); +#10684 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#10685 = VECTOR('',#10686,1.); +#10686 = DIRECTION('',(1.,0.,0.)); +#10687 = ORIENTED_EDGE('',*,*,#10688,.F.); +#10688 = EDGE_CURVE('',#10689,#10681,#10691,.T.); +#10689 = VERTEX_POINT('',#10690); +#10690 = CARTESIAN_POINT('',(-0.9125,0.46875,0.465)); +#10691 = LINE('',#10692,#10693); +#10692 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,0.465)); +#10693 = VECTOR('',#10694,1.); +#10694 = DIRECTION('',(0.,1.,0.)); +#10695 = ORIENTED_EDGE('',*,*,#10696,.F.); +#10696 = EDGE_CURVE('',#10493,#10689,#10697,.T.); +#10697 = LINE('',#10698,#10699); +#10698 = CARTESIAN_POINT('',(-0.93875,0.46875,0.465)); +#10699 = VECTOR('',#10700,1.); +#10700 = DIRECTION('',(-1.,0.,0.)); +#10701 = ORIENTED_EDGE('',*,*,#10490,.F.); +#10702 = PLANE('',#10703); +#10703 = AXIS2_PLACEMENT_3D('',#10704,#10705,#10706); +#10704 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10705 = DIRECTION('',(0.,0.,1.)); +#10706 = DIRECTION('',(1.,0.,-0.)); +#10707 = ADVANCED_FACE('',(#10708),#10719,.T.); +#10708 = FACE_BOUND('',#10709,.T.); +#10709 = EDGE_LOOP('',(#10710,#10711,#10712,#10713)); +#10710 = ORIENTED_EDGE('',*,*,#10523,.T.); +#10711 = ORIENTED_EDGE('',*,*,#10626,.T.); +#10712 = ORIENTED_EDGE('',*,*,#10666,.T.); +#10713 = ORIENTED_EDGE('',*,*,#10714,.T.); +#10714 = EDGE_CURVE('',#10659,#10491,#10715,.T.); +#10715 = LINE('',#10716,#10717); +#10716 = CARTESIAN_POINT('',(0.65,0.625,0.465)); +#10717 = VECTOR('',#10718,1.); +#10718 = DIRECTION('',(-1.,0.,-4.270088556251E-17)); +#10719 = PLANE('',#10720); +#10720 = AXIS2_PLACEMENT_3D('',#10721,#10722,#10723); +#10721 = CARTESIAN_POINT('',(1.481626402817E-17,0.625,0.771483451357)); +#10722 = DIRECTION('',(-5.57234551408E-33,1.,3.18580557984E-32)); +#10723 = DIRECTION('',(0.,-3.18580557984E-32,1.)); +#10724 = ADVANCED_FACE('',(#10725),#10752,.T.); +#10725 = FACE_BOUND('',#10726,.T.); +#10726 = EDGE_LOOP('',(#10727,#10736,#10744,#10751)); +#10727 = ORIENTED_EDGE('',*,*,#10728,.F.); +#10728 = EDGE_CURVE('',#10729,#10493,#10731,.T.); +#10729 = VERTEX_POINT('',#10730); +#10730 = CARTESIAN_POINT('',(-0.685,0.46875,0.5)); +#10731 = CIRCLE('',#10732,3.5E-02); +#10732 = AXIS2_PLACEMENT_3D('',#10733,#10734,#10735); +#10733 = CARTESIAN_POINT('',(-0.685,0.46875,0.465)); +#10734 = DIRECTION('',(-0.,1.,0.)); +#10735 = DIRECTION('',(1.,0.,0.)); +#10736 = ORIENTED_EDGE('',*,*,#10737,.F.); +#10737 = EDGE_CURVE('',#10738,#10729,#10740,.T.); +#10738 = VERTEX_POINT('',#10739); +#10739 = CARTESIAN_POINT('',(-0.685,-0.46875,0.5)); +#10740 = LINE('',#10741,#10742); +#10741 = CARTESIAN_POINT('',(-0.685,-0.625,0.5)); +#10742 = VECTOR('',#10743,1.); +#10743 = DIRECTION('',(0.,1.,0.)); +#10744 = ORIENTED_EDGE('',*,*,#10745,.T.); +#10745 = EDGE_CURVE('',#10738,#10501,#10746,.T.); +#10746 = CIRCLE('',#10747,3.5E-02); +#10747 = AXIS2_PLACEMENT_3D('',#10748,#10749,#10750); +#10748 = CARTESIAN_POINT('',(-0.685,-0.46875,0.465)); +#10749 = DIRECTION('',(-0.,1.,0.)); +#10750 = DIRECTION('',(1.,0.,0.)); +#10751 = ORIENTED_EDGE('',*,*,#10500,.T.); +#10752 = CYLINDRICAL_SURFACE('',#10753,3.5E-02); +#10753 = AXIS2_PLACEMENT_3D('',#10754,#10755,#10756); +#10754 = CARTESIAN_POINT('',(-0.685,-0.625,0.465)); +#10755 = DIRECTION('',(0.,1.,0.)); +#10756 = DIRECTION('',(1.,0.,0.)); +#10757 = ADVANCED_FACE('',(#10758),#10776,.T.); +#10758 = FACE_BOUND('',#10759,.T.); +#10759 = EDGE_LOOP('',(#10760,#10768,#10769,#10770)); +#10760 = ORIENTED_EDGE('',*,*,#10761,.F.); +#10761 = EDGE_CURVE('',#10556,#10762,#10764,.T.); +#10762 = VERTEX_POINT('',#10763); +#10763 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.465)); +#10764 = LINE('',#10765,#10766); +#10765 = CARTESIAN_POINT('',(-0.9125,-0.546875,0.465)); +#10766 = VECTOR('',#10767,1.); +#10767 = DIRECTION('',(0.,1.,0.)); +#10768 = ORIENTED_EDGE('',*,*,#10563,.T.); +#10769 = ORIENTED_EDGE('',*,*,#10508,.F.); +#10770 = ORIENTED_EDGE('',*,*,#10771,.F.); +#10771 = EDGE_CURVE('',#10762,#10501,#10772,.T.); +#10772 = LINE('',#10773,#10774); +#10773 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,0.465)); +#10774 = VECTOR('',#10775,1.); +#10775 = DIRECTION('',(1.,0.,0.)); +#10776 = PLANE('',#10777); +#10777 = AXIS2_PLACEMENT_3D('',#10778,#10779,#10780); +#10778 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10779 = DIRECTION('',(0.,0.,1.)); +#10780 = DIRECTION('',(1.,0.,-0.)); +#10781 = ADVANCED_FACE('',(#10782),#10843,.F.); +#10782 = FACE_BOUND('',#10783,.F.); +#10783 = EDGE_LOOP('',(#10784,#10794,#10803,#10811,#10820,#10828,#10834, + #10835,#10836,#10837)); +#10784 = ORIENTED_EDGE('',*,*,#10785,.F.); +#10785 = EDGE_CURVE('',#10786,#10788,#10790,.T.); +#10786 = VERTEX_POINT('',#10787); +#10787 = CARTESIAN_POINT('',(-0.965,-0.625,-6.938893903907E-18)); +#10788 = VERTEX_POINT('',#10789); +#10789 = CARTESIAN_POINT('',(-0.9125,-0.625,0.)); +#10790 = LINE('',#10791,#10792); +#10791 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#10792 = VECTOR('',#10793,1.); +#10793 = DIRECTION('',(1.,0.,0.)); +#10794 = ORIENTED_EDGE('',*,*,#10795,.F.); +#10795 = EDGE_CURVE('',#10796,#10786,#10798,.T.); +#10796 = VERTEX_POINT('',#10797); +#10797 = CARTESIAN_POINT('',(-1.,-0.625,3.5E-02)); +#10798 = CIRCLE('',#10799,3.5E-02); +#10799 = AXIS2_PLACEMENT_3D('',#10800,#10801,#10802); +#10800 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10801 = DIRECTION('',(0.,-1.,0.)); +#10802 = DIRECTION('',(0.,0.,1.)); +#10803 = ORIENTED_EDGE('',*,*,#10804,.T.); +#10804 = EDGE_CURVE('',#10796,#10805,#10807,.T.); +#10805 = VERTEX_POINT('',#10806); +#10806 = CARTESIAN_POINT('',(-1.,-0.625,0.465)); +#10807 = LINE('',#10808,#10809); +#10808 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#10809 = VECTOR('',#10810,1.); +#10810 = DIRECTION('',(0.,0.,1.)); +#10811 = ORIENTED_EDGE('',*,*,#10812,.T.); +#10812 = EDGE_CURVE('',#10805,#10813,#10815,.T.); +#10813 = VERTEX_POINT('',#10814); +#10814 = CARTESIAN_POINT('',(-0.965,-0.625,0.5)); +#10815 = CIRCLE('',#10816,3.5E-02); +#10816 = AXIS2_PLACEMENT_3D('',#10817,#10818,#10819); +#10817 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#10818 = DIRECTION('',(0.,1.,0.)); +#10819 = DIRECTION('',(0.,-0.,1.)); +#10820 = ORIENTED_EDGE('',*,*,#10821,.T.); +#10821 = EDGE_CURVE('',#10813,#10822,#10824,.T.); +#10822 = VERTEX_POINT('',#10823); +#10823 = CARTESIAN_POINT('',(-0.9125,-0.625,0.5)); +#10824 = LINE('',#10825,#10826); +#10825 = CARTESIAN_POINT('',(-1.,-0.625,0.5)); +#10826 = VECTOR('',#10827,1.); +#10827 = DIRECTION('',(1.,0.,0.)); +#10828 = ORIENTED_EDGE('',*,*,#10829,.F.); +#10829 = EDGE_CURVE('',#10556,#10822,#10830,.T.); +#10830 = LINE('',#10831,#10832); +#10831 = CARTESIAN_POINT('',(-0.9125,-0.625,0.375)); +#10832 = VECTOR('',#10833,1.); +#10833 = DIRECTION('',(0.,0.,1.)); +#10834 = ORIENTED_EDGE('',*,*,#10555,.F.); +#10835 = ORIENTED_EDGE('',*,*,#10547,.F.); +#10836 = ORIENTED_EDGE('',*,*,#10537,.T.); +#10837 = ORIENTED_EDGE('',*,*,#10838,.F.); +#10838 = EDGE_CURVE('',#10788,#10540,#10839,.T.); +#10839 = LINE('',#10840,#10841); +#10840 = CARTESIAN_POINT('',(-0.9125,-0.625,0.375)); +#10841 = VECTOR('',#10842,1.); +#10842 = DIRECTION('',(0.,0.,1.)); +#10843 = PLANE('',#10844); +#10844 = AXIS2_PLACEMENT_3D('',#10845,#10846,#10847); +#10845 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#10846 = DIRECTION('',(0.,1.,0.)); +#10847 = DIRECTION('',(0.,-0.,1.)); +#10848 = ADVANCED_FACE('',(#10849,#10938),#10964,.F.); +#10849 = FACE_BOUND('',#10850,.F.); +#10850 = EDGE_LOOP('',(#10851,#10859,#10860,#10868,#10876,#10884,#10892, + #10900,#10908,#10916,#10924,#10932)); +#10851 = ORIENTED_EDGE('',*,*,#10852,.F.); +#10852 = EDGE_CURVE('',#10540,#10853,#10855,.T.); +#10853 = VERTEX_POINT('',#10854); +#10854 = CARTESIAN_POINT('',(-0.9125,-0.46875,3.5E-02)); +#10855 = LINE('',#10856,#10857); +#10856 = CARTESIAN_POINT('',(-0.9125,-0.546875,3.5E-02)); +#10857 = VECTOR('',#10858,1.); +#10858 = DIRECTION('',(0.,1.,0.)); +#10859 = ORIENTED_EDGE('',*,*,#10602,.T.); +#10860 = ORIENTED_EDGE('',*,*,#10861,.F.); +#10861 = EDGE_CURVE('',#10862,#10595,#10864,.T.); +#10862 = VERTEX_POINT('',#10863); +#10863 = CARTESIAN_POINT('',(0.9125,-0.46875,3.5E-02)); +#10864 = LINE('',#10865,#10866); +#10865 = CARTESIAN_POINT('',(0.9125,-0.703125,3.5E-02)); +#10866 = VECTOR('',#10867,1.); +#10867 = DIRECTION('',(0.,-1.,0.)); +#10868 = ORIENTED_EDGE('',*,*,#10869,.F.); +#10869 = EDGE_CURVE('',#10870,#10862,#10872,.T.); +#10870 = VERTEX_POINT('',#10871); +#10871 = CARTESIAN_POINT('',(0.65,-0.46875,3.5E-02)); +#10872 = LINE('',#10873,#10874); +#10873 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,3.5E-02)); +#10874 = VECTOR('',#10875,1.); +#10875 = DIRECTION('',(1.,0.,0.)); +#10876 = ORIENTED_EDGE('',*,*,#10877,.T.); +#10877 = EDGE_CURVE('',#10870,#10878,#10880,.T.); +#10878 = VERTEX_POINT('',#10879); +#10879 = CARTESIAN_POINT('',(0.65,0.46875,3.5E-02)); +#10880 = LINE('',#10881,#10882); +#10881 = CARTESIAN_POINT('',(0.65,-0.625,3.5E-02)); +#10882 = VECTOR('',#10883,1.); +#10883 = DIRECTION('',(0.,1.,0.)); +#10884 = ORIENTED_EDGE('',*,*,#10885,.F.); +#10885 = EDGE_CURVE('',#10886,#10878,#10888,.T.); +#10886 = VERTEX_POINT('',#10887); +#10887 = CARTESIAN_POINT('',(0.9125,0.46875,3.5E-02)); +#10888 = LINE('',#10889,#10890); +#10889 = CARTESIAN_POINT('',(-0.93875,0.46875,3.5E-02)); +#10890 = VECTOR('',#10891,1.); +#10891 = DIRECTION('',(-1.,0.,0.)); +#10892 = ORIENTED_EDGE('',*,*,#10893,.F.); +#10893 = EDGE_CURVE('',#10894,#10886,#10896,.T.); +#10894 = VERTEX_POINT('',#10895); +#10895 = CARTESIAN_POINT('',(0.9125,0.625,3.5E-02)); +#10896 = LINE('',#10897,#10898); +#10897 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,3.5E-02)); +#10898 = VECTOR('',#10899,1.); +#10899 = DIRECTION('',(0.,-1.,0.)); +#10900 = ORIENTED_EDGE('',*,*,#10901,.F.); +#10901 = EDGE_CURVE('',#10902,#10894,#10904,.T.); +#10902 = VERTEX_POINT('',#10903); +#10903 = CARTESIAN_POINT('',(-0.9125,0.625,3.5E-02)); +#10904 = LINE('',#10905,#10906); +#10905 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#10906 = VECTOR('',#10907,1.); +#10907 = DIRECTION('',(1.,0.,0.)); +#10908 = ORIENTED_EDGE('',*,*,#10909,.F.); +#10909 = EDGE_CURVE('',#10910,#10902,#10912,.T.); +#10910 = VERTEX_POINT('',#10911); +#10911 = CARTESIAN_POINT('',(-0.9125,0.46875,3.5E-02)); +#10912 = LINE('',#10913,#10914); +#10913 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,3.5E-02)); +#10914 = VECTOR('',#10915,1.); +#10915 = DIRECTION('',(0.,1.,0.)); +#10916 = ORIENTED_EDGE('',*,*,#10917,.F.); +#10917 = EDGE_CURVE('',#10918,#10910,#10920,.T.); +#10918 = VERTEX_POINT('',#10919); +#10919 = CARTESIAN_POINT('',(-0.65,0.46875,3.5E-02)); +#10920 = LINE('',#10921,#10922); +#10921 = CARTESIAN_POINT('',(-0.93875,0.46875,3.5E-02)); +#10922 = VECTOR('',#10923,1.); +#10923 = DIRECTION('',(-1.,0.,0.)); +#10924 = ORIENTED_EDGE('',*,*,#10925,.F.); +#10925 = EDGE_CURVE('',#10926,#10918,#10928,.T.); +#10926 = VERTEX_POINT('',#10927); +#10927 = CARTESIAN_POINT('',(-0.65,-0.46875,3.5E-02)); +#10928 = LINE('',#10929,#10930); +#10929 = CARTESIAN_POINT('',(-0.65,-0.625,3.5E-02)); +#10930 = VECTOR('',#10931,1.); +#10931 = DIRECTION('',(0.,1.,0.)); +#10932 = ORIENTED_EDGE('',*,*,#10933,.F.); +#10933 = EDGE_CURVE('',#10853,#10926,#10934,.T.); +#10934 = LINE('',#10935,#10936); +#10935 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,3.5E-02)); +#10936 = VECTOR('',#10937,1.); +#10937 = DIRECTION('',(1.,0.,0.)); +#10938 = FACE_BOUND('',#10939,.F.); +#10939 = EDGE_LOOP('',(#10940,#10950,#10958)); +#10940 = ORIENTED_EDGE('',*,*,#10941,.T.); +#10941 = EDGE_CURVE('',#10942,#10944,#10946,.T.); +#10942 = VERTEX_POINT('',#10943); +#10943 = CARTESIAN_POINT('',(0.433012701892,0.5,3.5E-02)); +#10944 = VERTEX_POINT('',#10945); +#10945 = CARTESIAN_POINT('',(0.433012701892,-0.5,3.5E-02)); +#10946 = LINE('',#10947,#10948); +#10947 = CARTESIAN_POINT('',(0.433012701892,0.5,3.5E-02)); +#10948 = VECTOR('',#10949,1.); +#10949 = DIRECTION('',(0.,-1.,0.)); +#10950 = ORIENTED_EDGE('',*,*,#10951,.T.); +#10951 = EDGE_CURVE('',#10944,#10952,#10954,.T.); +#10952 = VERTEX_POINT('',#10953); +#10953 = CARTESIAN_POINT('',(-0.433012701892,0.,3.5E-02)); +#10954 = LINE('',#10955,#10956); +#10955 = CARTESIAN_POINT('',(0.433012701892,-0.5,3.5E-02)); +#10956 = VECTOR('',#10957,1.); +#10957 = DIRECTION('',(-0.866025403784,0.5,0.)); +#10958 = ORIENTED_EDGE('',*,*,#10959,.T.); +#10959 = EDGE_CURVE('',#10952,#10942,#10960,.T.); +#10960 = LINE('',#10961,#10962); +#10961 = CARTESIAN_POINT('',(-0.433012701892,0.,3.5E-02)); +#10962 = VECTOR('',#10963,1.); +#10963 = DIRECTION('',(0.866025403784,0.5,0.)); +#10964 = PLANE('',#10965); +#10965 = AXIS2_PLACEMENT_3D('',#10966,#10967,#10968); +#10966 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#10967 = DIRECTION('',(0.,0.,1.)); +#10968 = DIRECTION('',(1.,0.,-0.)); +#10969 = ADVANCED_FACE('',(#10970),#11031,.F.); +#10970 = FACE_BOUND('',#10971,.F.); +#10971 = EDGE_LOOP('',(#10972,#10982,#10988,#10989,#10990,#10991,#10999, + #11007,#11016,#11024)); +#10972 = ORIENTED_EDGE('',*,*,#10973,.F.); +#10973 = EDGE_CURVE('',#10974,#10976,#10978,.T.); +#10974 = VERTEX_POINT('',#10975); +#10975 = CARTESIAN_POINT('',(0.9125,-0.625,0.)); +#10976 = VERTEX_POINT('',#10977); +#10977 = CARTESIAN_POINT('',(0.965,-0.625,-6.938893903907E-18)); +#10978 = LINE('',#10979,#10980); +#10979 = CARTESIAN_POINT('',(0.65,-0.625,0.)); +#10980 = VECTOR('',#10981,1.); +#10981 = DIRECTION('',(1.,0.,0.)); +#10982 = ORIENTED_EDGE('',*,*,#10983,.F.); +#10983 = EDGE_CURVE('',#10595,#10974,#10984,.T.); +#10984 = LINE('',#10985,#10986); +#10985 = CARTESIAN_POINT('',(0.9125,-0.625,0.375)); +#10986 = VECTOR('',#10987,1.); +#10987 = DIRECTION('',(0.,0.,-1.)); +#10988 = ORIENTED_EDGE('',*,*,#10594,.T.); +#10989 = ORIENTED_EDGE('',*,*,#10586,.T.); +#10990 = ORIENTED_EDGE('',*,*,#10578,.F.); +#10991 = ORIENTED_EDGE('',*,*,#10992,.F.); +#10992 = EDGE_CURVE('',#10993,#10571,#10995,.T.); +#10993 = VERTEX_POINT('',#10994); +#10994 = CARTESIAN_POINT('',(0.9125,-0.625,0.5)); +#10995 = LINE('',#10996,#10997); +#10996 = CARTESIAN_POINT('',(0.9125,-0.625,0.375)); +#10997 = VECTOR('',#10998,1.); +#10998 = DIRECTION('',(0.,0.,-1.)); +#10999 = ORIENTED_EDGE('',*,*,#11000,.T.); +#11000 = EDGE_CURVE('',#10993,#11001,#11003,.T.); +#11001 = VERTEX_POINT('',#11002); +#11002 = CARTESIAN_POINT('',(0.965,-0.625,0.5)); +#11003 = LINE('',#11004,#11005); +#11004 = CARTESIAN_POINT('',(0.65,-0.625,0.5)); +#11005 = VECTOR('',#11006,1.); +#11006 = DIRECTION('',(1.,0.,0.)); +#11007 = ORIENTED_EDGE('',*,*,#11008,.F.); +#11008 = EDGE_CURVE('',#11009,#11001,#11011,.T.); +#11009 = VERTEX_POINT('',#11010); +#11010 = CARTESIAN_POINT('',(1.,-0.625,0.465)); +#11011 = CIRCLE('',#11012,3.5E-02); +#11012 = AXIS2_PLACEMENT_3D('',#11013,#11014,#11015); +#11013 = CARTESIAN_POINT('',(0.965,-0.625,0.465)); +#11014 = DIRECTION('',(0.,-1.,0.)); +#11015 = DIRECTION('',(0.,0.,1.)); +#11016 = ORIENTED_EDGE('',*,*,#11017,.F.); +#11017 = EDGE_CURVE('',#11018,#11009,#11020,.T.); +#11018 = VERTEX_POINT('',#11019); +#11019 = CARTESIAN_POINT('',(1.,-0.625,3.5E-02)); +#11020 = LINE('',#11021,#11022); +#11021 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#11022 = VECTOR('',#11023,1.); +#11023 = DIRECTION('',(0.,0.,1.)); +#11024 = ORIENTED_EDGE('',*,*,#11025,.T.); +#11025 = EDGE_CURVE('',#11018,#10976,#11026,.T.); +#11026 = CIRCLE('',#11027,3.5E-02); +#11027 = AXIS2_PLACEMENT_3D('',#11028,#11029,#11030); +#11028 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#11029 = DIRECTION('',(0.,1.,0.)); +#11030 = DIRECTION('',(0.,-0.,1.)); +#11031 = PLANE('',#11032); +#11032 = AXIS2_PLACEMENT_3D('',#11033,#11034,#11035); +#11033 = CARTESIAN_POINT('',(0.65,-0.625,0.)); +#11034 = DIRECTION('',(0.,1.,0.)); +#11035 = DIRECTION('',(0.,-0.,1.)); +#11036 = ADVANCED_FACE('',(#11037),#11055,.T.); +#11037 = FACE_BOUND('',#11038,.T.); +#11038 = EDGE_LOOP('',(#11039,#11047,#11048,#11049)); +#11039 = ORIENTED_EDGE('',*,*,#11040,.F.); +#11040 = EDGE_CURVE('',#10643,#11041,#11043,.T.); +#11041 = VERTEX_POINT('',#11042); +#11042 = CARTESIAN_POINT('',(0.9125,-0.46875,0.465)); +#11043 = LINE('',#11044,#11045); +#11044 = CARTESIAN_POINT('',(-2.625E-02,-0.46875,0.465)); +#11045 = VECTOR('',#11046,1.); +#11046 = DIRECTION('',(1.,0.,0.)); +#11047 = ORIENTED_EDGE('',*,*,#10642,.T.); +#11048 = ORIENTED_EDGE('',*,*,#10570,.T.); +#11049 = ORIENTED_EDGE('',*,*,#11050,.F.); +#11050 = EDGE_CURVE('',#11041,#10571,#11051,.T.); +#11051 = LINE('',#11052,#11053); +#11052 = CARTESIAN_POINT('',(0.9125,-0.703125,0.465)); +#11053 = VECTOR('',#11054,1.); +#11054 = DIRECTION('',(0.,-1.,0.)); +#11055 = PLANE('',#11056); +#11056 = AXIS2_PLACEMENT_3D('',#11057,#11058,#11059); +#11057 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#11058 = DIRECTION('',(0.,0.,1.)); +#11059 = DIRECTION('',(1.,0.,-0.)); +#11060 = ADVANCED_FACE('',(#11061),#11086,.T.); +#11061 = FACE_BOUND('',#11062,.T.); +#11062 = EDGE_LOOP('',(#11063,#11071,#11072,#11080)); +#11063 = ORIENTED_EDGE('',*,*,#11064,.F.); +#11064 = EDGE_CURVE('',#10659,#11065,#11067,.T.); +#11065 = VERTEX_POINT('',#11066); +#11066 = CARTESIAN_POINT('',(0.9125,0.625,0.465)); +#11067 = LINE('',#11068,#11069); +#11068 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11069 = VECTOR('',#11070,1.); +#11070 = DIRECTION('',(1.,0.,0.)); +#11071 = ORIENTED_EDGE('',*,*,#10658,.T.); +#11072 = ORIENTED_EDGE('',*,*,#11073,.F.); +#11073 = EDGE_CURVE('',#11074,#10651,#11076,.T.); +#11074 = VERTEX_POINT('',#11075); +#11075 = CARTESIAN_POINT('',(0.9125,0.46875,0.465)); +#11076 = LINE('',#11077,#11078); +#11077 = CARTESIAN_POINT('',(-0.93875,0.46875,0.465)); +#11078 = VECTOR('',#11079,1.); +#11079 = DIRECTION('',(-1.,0.,0.)); +#11080 = ORIENTED_EDGE('',*,*,#11081,.F.); +#11081 = EDGE_CURVE('',#11065,#11074,#11082,.T.); +#11082 = LINE('',#11083,#11084); +#11083 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,0.465)); +#11084 = VECTOR('',#11085,1.); +#11085 = DIRECTION('',(0.,-1.,0.)); +#11086 = PLANE('',#11087); +#11087 = AXIS2_PLACEMENT_3D('',#11088,#11089,#11090); +#11088 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#11089 = DIRECTION('',(0.,0.,1.)); +#11090 = DIRECTION('',(1.,0.,-0.)); +#11091 = ADVANCED_FACE('',(#11092),#11119,.T.); +#11092 = FACE_BOUND('',#11093,.T.); +#11093 = EDGE_LOOP('',(#11094,#11095,#11104,#11112)); +#11094 = ORIENTED_EDGE('',*,*,#10650,.T.); +#11095 = ORIENTED_EDGE('',*,*,#11096,.T.); +#11096 = EDGE_CURVE('',#10643,#11097,#11099,.T.); +#11097 = VERTEX_POINT('',#11098); +#11098 = CARTESIAN_POINT('',(0.685,-0.46875,0.5)); +#11099 = CIRCLE('',#11100,3.5E-02); +#11100 = AXIS2_PLACEMENT_3D('',#11101,#11102,#11103); +#11101 = CARTESIAN_POINT('',(0.685,-0.46875,0.465)); +#11102 = DIRECTION('',(0.,1.,-0.)); +#11103 = DIRECTION('',(-1.,0.,0.)); +#11104 = ORIENTED_EDGE('',*,*,#11105,.T.); +#11105 = EDGE_CURVE('',#11097,#11106,#11108,.T.); +#11106 = VERTEX_POINT('',#11107); +#11107 = CARTESIAN_POINT('',(0.685,0.46875,0.5)); +#11108 = LINE('',#11109,#11110); +#11109 = CARTESIAN_POINT('',(0.685,-0.625,0.5)); +#11110 = VECTOR('',#11111,1.); +#11111 = DIRECTION('',(0.,1.,0.)); +#11112 = ORIENTED_EDGE('',*,*,#11113,.F.); +#11113 = EDGE_CURVE('',#10651,#11106,#11114,.T.); +#11114 = CIRCLE('',#11115,3.5E-02); +#11115 = AXIS2_PLACEMENT_3D('',#11116,#11117,#11118); +#11116 = CARTESIAN_POINT('',(0.685,0.46875,0.465)); +#11117 = DIRECTION('',(0.,1.,-0.)); +#11118 = DIRECTION('',(-1.,0.,0.)); +#11119 = CYLINDRICAL_SURFACE('',#11120,3.5E-02); +#11120 = AXIS2_PLACEMENT_3D('',#11121,#11122,#11123); +#11121 = CARTESIAN_POINT('',(0.685,-0.625,0.465)); +#11122 = DIRECTION('',(0.,1.,0.)); +#11123 = DIRECTION('',(-1.,0.,0.)); +#11124 = ADVANCED_FACE('',(#11125),#11175,.T.); +#11125 = FACE_BOUND('',#11126,.T.); +#11126 = EDGE_LOOP('',(#11127,#11135,#11143,#11149,#11150,#11151,#11152, + #11160,#11168,#11174)); +#11127 = ORIENTED_EDGE('',*,*,#11128,.F.); +#11128 = EDGE_CURVE('',#11129,#10902,#11131,.T.); +#11129 = VERTEX_POINT('',#11130); +#11130 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11131 = LINE('',#11132,#11133); +#11132 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11133 = VECTOR('',#11134,1.); +#11134 = DIRECTION('',(1.,0.,0.)); +#11135 = ORIENTED_EDGE('',*,*,#11136,.T.); +#11136 = EDGE_CURVE('',#11129,#11137,#11139,.T.); +#11137 = VERTEX_POINT('',#11138); +#11138 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11139 = LINE('',#11140,#11141); +#11140 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11141 = VECTOR('',#11142,1.); +#11142 = DIRECTION('',(0.,0.,1.)); +#11143 = ORIENTED_EDGE('',*,*,#11144,.T.); +#11144 = EDGE_CURVE('',#11137,#10681,#11145,.T.); +#11145 = LINE('',#11146,#11147); +#11146 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11147 = VECTOR('',#11148,1.); +#11148 = DIRECTION('',(1.,0.,0.)); +#11149 = ORIENTED_EDGE('',*,*,#10680,.T.); +#11150 = ORIENTED_EDGE('',*,*,#10714,.F.); +#11151 = ORIENTED_EDGE('',*,*,#11064,.T.); +#11152 = ORIENTED_EDGE('',*,*,#11153,.T.); +#11153 = EDGE_CURVE('',#11065,#11154,#11156,.T.); +#11154 = VERTEX_POINT('',#11155); +#11155 = CARTESIAN_POINT('',(0.965,0.625,0.465)); +#11156 = LINE('',#11157,#11158); +#11157 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11158 = VECTOR('',#11159,1.); +#11159 = DIRECTION('',(1.,0.,0.)); +#11160 = ORIENTED_EDGE('',*,*,#11161,.F.); +#11161 = EDGE_CURVE('',#11162,#11154,#11164,.T.); +#11162 = VERTEX_POINT('',#11163); +#11163 = CARTESIAN_POINT('',(0.965,0.625,3.5E-02)); +#11164 = LINE('',#11165,#11166); +#11165 = CARTESIAN_POINT('',(0.965,0.625,3.5E-02)); +#11166 = VECTOR('',#11167,1.); +#11167 = DIRECTION('',(0.,0.,1.)); +#11168 = ORIENTED_EDGE('',*,*,#11169,.F.); +#11169 = EDGE_CURVE('',#10894,#11162,#11170,.T.); +#11170 = LINE('',#11171,#11172); +#11171 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11172 = VECTOR('',#11173,1.); +#11173 = DIRECTION('',(1.,0.,0.)); +#11174 = ORIENTED_EDGE('',*,*,#10901,.F.); +#11175 = PLANE('',#11176); +#11176 = AXIS2_PLACEMENT_3D('',#11177,#11178,#11179); +#11177 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11178 = DIRECTION('',(0.,1.,0.)); +#11179 = DIRECTION('',(0.,-0.,1.)); +#11180 = ADVANCED_FACE('',(#11181),#11199,.F.); +#11181 = FACE_BOUND('',#11182,.F.); +#11182 = EDGE_LOOP('',(#11183,#11191,#11197,#11198)); +#11183 = ORIENTED_EDGE('',*,*,#11184,.F.); +#11184 = EDGE_CURVE('',#11185,#10729,#11187,.T.); +#11185 = VERTEX_POINT('',#11186); +#11186 = CARTESIAN_POINT('',(-0.9125,0.46875,0.5)); +#11187 = LINE('',#11188,#11189); +#11188 = CARTESIAN_POINT('',(-0.95625,0.46875,0.5)); +#11189 = VECTOR('',#11190,1.); +#11190 = DIRECTION('',(1.,0.,0.)); +#11191 = ORIENTED_EDGE('',*,*,#11192,.T.); +#11192 = EDGE_CURVE('',#11185,#10689,#11193,.T.); +#11193 = LINE('',#11194,#11195); +#11194 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11195 = VECTOR('',#11196,1.); +#11196 = DIRECTION('',(-0.,-0.,-1.)); +#11197 = ORIENTED_EDGE('',*,*,#10696,.F.); +#11198 = ORIENTED_EDGE('',*,*,#10728,.F.); +#11199 = PLANE('',#11200); +#11200 = AXIS2_PLACEMENT_3D('',#11201,#11202,#11203); +#11201 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11202 = DIRECTION('',(0.,-1.,0.)); +#11203 = DIRECTION('',(1.,0.,0.)); +#11204 = ADVANCED_FACE('',(#11205),#11223,.F.); +#11205 = FACE_BOUND('',#11206,.F.); +#11206 = EDGE_LOOP('',(#11207,#11208,#11216,#11222)); +#11207 = ORIENTED_EDGE('',*,*,#11192,.F.); +#11208 = ORIENTED_EDGE('',*,*,#11209,.F.); +#11209 = EDGE_CURVE('',#11210,#11185,#11212,.T.); +#11210 = VERTEX_POINT('',#11211); +#11211 = CARTESIAN_POINT('',(-0.9125,0.625,0.5)); +#11212 = LINE('',#11213,#11214); +#11213 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,0.5)); +#11214 = VECTOR('',#11215,1.); +#11215 = DIRECTION('',(0.,-1.,0.)); +#11216 = ORIENTED_EDGE('',*,*,#11217,.F.); +#11217 = EDGE_CURVE('',#10681,#11210,#11218,.T.); +#11218 = LINE('',#11219,#11220); +#11219 = CARTESIAN_POINT('',(-0.9125,0.625,0.375)); +#11220 = VECTOR('',#11221,1.); +#11221 = DIRECTION('',(0.,0.,1.)); +#11222 = ORIENTED_EDGE('',*,*,#10688,.F.); +#11223 = PLANE('',#11224); +#11224 = AXIS2_PLACEMENT_3D('',#11225,#11226,#11227); +#11225 = CARTESIAN_POINT('',(-0.9125,0.78125,0.75)); +#11226 = DIRECTION('',(-1.,0.,0.)); +#11227 = DIRECTION('',(0.,-1.,0.)); +#11228 = ADVANCED_FACE('',(#11229),#11247,.F.); +#11229 = FACE_BOUND('',#11230,.F.); +#11230 = EDGE_LOOP('',(#11231,#11239,#11245,#11246)); +#11231 = ORIENTED_EDGE('',*,*,#11232,.F.); +#11232 = EDGE_CURVE('',#11233,#10762,#11235,.T.); +#11233 = VERTEX_POINT('',#11234); +#11234 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.5)); +#11235 = LINE('',#11236,#11237); +#11236 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11237 = VECTOR('',#11238,1.); +#11238 = DIRECTION('',(-0.,-0.,-1.)); +#11239 = ORIENTED_EDGE('',*,*,#11240,.F.); +#11240 = EDGE_CURVE('',#10738,#11233,#11241,.T.); +#11241 = LINE('',#11242,#11243); +#11242 = CARTESIAN_POINT('',(-4.375E-02,-0.46875,0.5)); +#11243 = VECTOR('',#11244,1.); +#11244 = DIRECTION('',(-1.,0.,0.)); +#11245 = ORIENTED_EDGE('',*,*,#10745,.T.); +#11246 = ORIENTED_EDGE('',*,*,#10771,.F.); +#11247 = PLANE('',#11248); +#11248 = AXIS2_PLACEMENT_3D('',#11249,#11250,#11251); +#11249 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11250 = DIRECTION('',(0.,1.,0.)); +#11251 = DIRECTION('',(-1.,0.,0.)); +#11252 = ADVANCED_FACE('',(#11253),#11280,.T.); +#11253 = FACE_BOUND('',#11254,.T.); +#11254 = EDGE_LOOP('',(#11255,#11263,#11269,#11270,#11276,#11277,#11278, + #11279)); +#11255 = ORIENTED_EDGE('',*,*,#11256,.F.); +#11256 = EDGE_CURVE('',#11257,#11210,#11259,.T.); +#11257 = VERTEX_POINT('',#11258); +#11258 = CARTESIAN_POINT('',(-0.965,0.625,0.5)); +#11259 = LINE('',#11260,#11261); +#11260 = CARTESIAN_POINT('',(-1.,0.625,0.5)); +#11261 = VECTOR('',#11262,1.); +#11262 = DIRECTION('',(1.,0.,0.)); +#11263 = ORIENTED_EDGE('',*,*,#11264,.F.); +#11264 = EDGE_CURVE('',#10813,#11257,#11265,.T.); +#11265 = LINE('',#11266,#11267); +#11266 = CARTESIAN_POINT('',(-0.965,-0.625,0.5)); +#11267 = VECTOR('',#11268,1.); +#11268 = DIRECTION('',(0.,1.,0.)); +#11269 = ORIENTED_EDGE('',*,*,#10821,.T.); +#11270 = ORIENTED_EDGE('',*,*,#11271,.F.); +#11271 = EDGE_CURVE('',#11233,#10822,#11272,.T.); +#11272 = LINE('',#11273,#11274); +#11273 = CARTESIAN_POINT('',(-0.9125,-0.546875,0.5)); +#11274 = VECTOR('',#11275,1.); +#11275 = DIRECTION('',(0.,-1.,0.)); +#11276 = ORIENTED_EDGE('',*,*,#11240,.F.); +#11277 = ORIENTED_EDGE('',*,*,#10737,.T.); +#11278 = ORIENTED_EDGE('',*,*,#11184,.F.); +#11279 = ORIENTED_EDGE('',*,*,#11209,.F.); +#11280 = PLANE('',#11281); +#11281 = AXIS2_PLACEMENT_3D('',#11282,#11283,#11284); +#11282 = CARTESIAN_POINT('',(-1.,-0.625,0.5)); +#11283 = DIRECTION('',(0.,0.,1.)); +#11284 = DIRECTION('',(1.,0.,-0.)); +#11285 = ADVANCED_FACE('',(#11286),#11292,.F.); +#11286 = FACE_BOUND('',#11287,.F.); +#11287 = EDGE_LOOP('',(#11288,#11289,#11290,#11291)); +#11288 = ORIENTED_EDGE('',*,*,#11271,.F.); +#11289 = ORIENTED_EDGE('',*,*,#11232,.T.); +#11290 = ORIENTED_EDGE('',*,*,#10761,.F.); +#11291 = ORIENTED_EDGE('',*,*,#10829,.T.); +#11292 = PLANE('',#11293); +#11293 = AXIS2_PLACEMENT_3D('',#11294,#11295,#11296); +#11294 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11295 = DIRECTION('',(-1.,0.,0.)); +#11296 = DIRECTION('',(0.,-1.,0.)); +#11297 = ADVANCED_FACE('',(#11298),#11355,.F.); +#11298 = FACE_BOUND('',#11299,.F.); +#11299 = EDGE_LOOP('',(#11300,#11310,#11316,#11317,#11325,#11333,#11341, + #11349)); +#11300 = ORIENTED_EDGE('',*,*,#11301,.F.); +#11301 = EDGE_CURVE('',#11302,#11304,#11306,.T.); +#11302 = VERTEX_POINT('',#11303); +#11303 = CARTESIAN_POINT('',(-0.965,0.625,-6.938893903907E-18)); +#11304 = VERTEX_POINT('',#11305); +#11305 = CARTESIAN_POINT('',(-0.9125,0.625,0.)); +#11306 = LINE('',#11307,#11308); +#11307 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#11308 = VECTOR('',#11309,1.); +#11309 = DIRECTION('',(1.,0.,0.)); +#11310 = ORIENTED_EDGE('',*,*,#11311,.F.); +#11311 = EDGE_CURVE('',#10786,#11302,#11312,.T.); +#11312 = LINE('',#11313,#11314); +#11313 = CARTESIAN_POINT('',(-0.965,-0.625,-6.938893903907E-18)); +#11314 = VECTOR('',#11315,1.); +#11315 = DIRECTION('',(0.,1.,0.)); +#11316 = ORIENTED_EDGE('',*,*,#10785,.T.); +#11317 = ORIENTED_EDGE('',*,*,#11318,.F.); +#11318 = EDGE_CURVE('',#11319,#10788,#11321,.T.); +#11319 = VERTEX_POINT('',#11320); +#11320 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.)); +#11321 = LINE('',#11322,#11323); +#11322 = CARTESIAN_POINT('',(-0.9125,-0.546875,0.)); +#11323 = VECTOR('',#11324,1.); +#11324 = DIRECTION('',(0.,-1.,0.)); +#11325 = ORIENTED_EDGE('',*,*,#11326,.F.); +#11326 = EDGE_CURVE('',#11327,#11319,#11329,.T.); +#11327 = VERTEX_POINT('',#11328); +#11328 = CARTESIAN_POINT('',(-0.685,-0.46875,-6.938893903907E-18)); +#11329 = LINE('',#11330,#11331); +#11330 = CARTESIAN_POINT('',(-4.375E-02,-0.46875,0.)); +#11331 = VECTOR('',#11332,1.); +#11332 = DIRECTION('',(-1.,0.,0.)); +#11333 = ORIENTED_EDGE('',*,*,#11334,.T.); +#11334 = EDGE_CURVE('',#11327,#11335,#11337,.T.); +#11335 = VERTEX_POINT('',#11336); +#11336 = CARTESIAN_POINT('',(-0.685,0.46875,-6.938893903907E-18)); +#11337 = LINE('',#11338,#11339); +#11338 = CARTESIAN_POINT('',(-0.685,-0.625,-6.938893903907E-18)); +#11339 = VECTOR('',#11340,1.); +#11340 = DIRECTION('',(0.,1.,0.)); +#11341 = ORIENTED_EDGE('',*,*,#11342,.F.); +#11342 = EDGE_CURVE('',#11343,#11335,#11345,.T.); +#11343 = VERTEX_POINT('',#11344); +#11344 = CARTESIAN_POINT('',(-0.9125,0.46875,0.)); +#11345 = LINE('',#11346,#11347); +#11346 = CARTESIAN_POINT('',(-0.95625,0.46875,0.)); +#11347 = VECTOR('',#11348,1.); +#11348 = DIRECTION('',(1.,0.,0.)); +#11349 = ORIENTED_EDGE('',*,*,#11350,.F.); +#11350 = EDGE_CURVE('',#11304,#11343,#11351,.T.); +#11351 = LINE('',#11352,#11353); +#11352 = CARTESIAN_POINT('',(-0.9125,7.8125E-02,0.)); +#11353 = VECTOR('',#11354,1.); +#11354 = DIRECTION('',(0.,-1.,0.)); +#11355 = PLANE('',#11356); +#11356 = AXIS2_PLACEMENT_3D('',#11357,#11358,#11359); +#11357 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#11358 = DIRECTION('',(0.,0.,1.)); +#11359 = DIRECTION('',(1.,0.,-0.)); +#11360 = ADVANCED_FACE('',(#11361),#11380,.T.); +#11361 = FACE_BOUND('',#11362,.T.); +#11362 = EDGE_LOOP('',(#11363,#11371,#11378,#11379)); +#11363 = ORIENTED_EDGE('',*,*,#11364,.T.); +#11364 = EDGE_CURVE('',#10796,#11365,#11367,.T.); +#11365 = VERTEX_POINT('',#11366); +#11366 = CARTESIAN_POINT('',(-1.,0.625,3.5E-02)); +#11367 = LINE('',#11368,#11369); +#11368 = CARTESIAN_POINT('',(-1.,-0.625,3.5E-02)); +#11369 = VECTOR('',#11370,1.); +#11370 = DIRECTION('',(0.,1.,0.)); +#11371 = ORIENTED_EDGE('',*,*,#11372,.T.); +#11372 = EDGE_CURVE('',#11365,#11302,#11373,.T.); +#11373 = CIRCLE('',#11374,3.5E-02); +#11374 = AXIS2_PLACEMENT_3D('',#11375,#11376,#11377); +#11375 = CARTESIAN_POINT('',(-0.965,0.625,3.5E-02)); +#11376 = DIRECTION('',(0.,-1.,0.)); +#11377 = DIRECTION('',(0.,0.,1.)); +#11378 = ORIENTED_EDGE('',*,*,#11311,.F.); +#11379 = ORIENTED_EDGE('',*,*,#10795,.F.); +#11380 = CYLINDRICAL_SURFACE('',#11381,3.5E-02); +#11381 = AXIS2_PLACEMENT_3D('',#11382,#11383,#11384); +#11382 = CARTESIAN_POINT('',(-0.965,-0.625,3.5E-02)); +#11383 = DIRECTION('',(0.,1.,0.)); +#11384 = DIRECTION('',(-1.,0.,0.)); +#11385 = ADVANCED_FACE('',(#11386),#11397,.F.); +#11386 = FACE_BOUND('',#11387,.F.); +#11387 = EDGE_LOOP('',(#11388,#11389,#11395,#11396)); +#11388 = ORIENTED_EDGE('',*,*,#10852,.T.); +#11389 = ORIENTED_EDGE('',*,*,#11390,.T.); +#11390 = EDGE_CURVE('',#10853,#11319,#11391,.T.); +#11391 = LINE('',#11392,#11393); +#11392 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11393 = VECTOR('',#11394,1.); +#11394 = DIRECTION('',(-0.,-0.,-1.)); +#11395 = ORIENTED_EDGE('',*,*,#11318,.T.); +#11396 = ORIENTED_EDGE('',*,*,#10838,.T.); +#11397 = PLANE('',#11398); +#11398 = AXIS2_PLACEMENT_3D('',#11399,#11400,#11401); +#11399 = CARTESIAN_POINT('',(-0.9125,-0.46875,0.75)); +#11400 = DIRECTION('',(-1.,0.,0.)); +#11401 = DIRECTION('',(0.,-1.,0.)); +#11402 = ADVANCED_FACE('',(#11403),#11421,.F.); +#11403 = FACE_BOUND('',#11404,.F.); +#11404 = EDGE_LOOP('',(#11405,#11406,#11407,#11415)); +#11405 = ORIENTED_EDGE('',*,*,#10804,.F.); +#11406 = ORIENTED_EDGE('',*,*,#11364,.T.); +#11407 = ORIENTED_EDGE('',*,*,#11408,.T.); +#11408 = EDGE_CURVE('',#11365,#11409,#11411,.T.); +#11409 = VERTEX_POINT('',#11410); +#11410 = CARTESIAN_POINT('',(-1.,0.625,0.465)); +#11411 = LINE('',#11412,#11413); +#11412 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#11413 = VECTOR('',#11414,1.); +#11414 = DIRECTION('',(0.,0.,1.)); +#11415 = ORIENTED_EDGE('',*,*,#11416,.F.); +#11416 = EDGE_CURVE('',#10805,#11409,#11417,.T.); +#11417 = LINE('',#11418,#11419); +#11418 = CARTESIAN_POINT('',(-1.,-0.625,0.465)); +#11419 = VECTOR('',#11420,1.); +#11420 = DIRECTION('',(0.,1.,0.)); +#11421 = PLANE('',#11422); +#11422 = AXIS2_PLACEMENT_3D('',#11423,#11424,#11425); +#11423 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#11424 = DIRECTION('',(1.,0.,0.)); +#11425 = DIRECTION('',(0.,0.,1.)); +#11426 = ADVANCED_FACE('',(#11427),#11439,.T.); +#11427 = FACE_BOUND('',#11428,.T.); +#11428 = EDGE_LOOP('',(#11429,#11430,#11431,#11438)); +#11429 = ORIENTED_EDGE('',*,*,#10812,.T.); +#11430 = ORIENTED_EDGE('',*,*,#11264,.T.); +#11431 = ORIENTED_EDGE('',*,*,#11432,.F.); +#11432 = EDGE_CURVE('',#11409,#11257,#11433,.T.); +#11433 = CIRCLE('',#11434,3.5E-02); +#11434 = AXIS2_PLACEMENT_3D('',#11435,#11436,#11437); +#11435 = CARTESIAN_POINT('',(-0.965,0.625,0.465)); +#11436 = DIRECTION('',(0.,1.,0.)); +#11437 = DIRECTION('',(0.,-0.,1.)); +#11438 = ORIENTED_EDGE('',*,*,#11416,.F.); +#11439 = CYLINDRICAL_SURFACE('',#11440,3.5E-02); +#11440 = AXIS2_PLACEMENT_3D('',#11441,#11442,#11443); +#11441 = CARTESIAN_POINT('',(-0.965,-0.625,0.465)); +#11442 = DIRECTION('',(0.,1.,0.)); +#11443 = DIRECTION('',(-1.,0.,0.)); +#11444 = ADVANCED_FACE('',(#11445),#11457,.F.); +#11445 = FACE_BOUND('',#11446,.F.); +#11446 = EDGE_LOOP('',(#11447,#11448,#11449,#11456)); +#11447 = ORIENTED_EDGE('',*,*,#11390,.F.); +#11448 = ORIENTED_EDGE('',*,*,#10933,.T.); +#11449 = ORIENTED_EDGE('',*,*,#11450,.T.); +#11450 = EDGE_CURVE('',#10926,#11327,#11451,.T.); +#11451 = CIRCLE('',#11452,3.5E-02); +#11452 = AXIS2_PLACEMENT_3D('',#11453,#11454,#11455); +#11453 = CARTESIAN_POINT('',(-0.685,-0.46875,3.5E-02)); +#11454 = DIRECTION('',(-0.,1.,0.)); +#11455 = DIRECTION('',(1.,0.,0.)); +#11456 = ORIENTED_EDGE('',*,*,#11326,.T.); +#11457 = PLANE('',#11458); +#11458 = AXIS2_PLACEMENT_3D('',#11459,#11460,#11461); +#11459 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11460 = DIRECTION('',(0.,1.,0.)); +#11461 = DIRECTION('',(-1.,0.,0.)); +#11462 = ADVANCED_FACE('',(#11463),#11475,.T.); +#11463 = FACE_BOUND('',#11464,.T.); +#11464 = EDGE_LOOP('',(#11465,#11466,#11467,#11468)); +#11465 = ORIENTED_EDGE('',*,*,#10925,.F.); +#11466 = ORIENTED_EDGE('',*,*,#11450,.T.); +#11467 = ORIENTED_EDGE('',*,*,#11334,.T.); +#11468 = ORIENTED_EDGE('',*,*,#11469,.F.); +#11469 = EDGE_CURVE('',#10918,#11335,#11470,.T.); +#11470 = CIRCLE('',#11471,3.5E-02); +#11471 = AXIS2_PLACEMENT_3D('',#11472,#11473,#11474); +#11472 = CARTESIAN_POINT('',(-0.685,0.46875,3.5E-02)); +#11473 = DIRECTION('',(-0.,1.,0.)); +#11474 = DIRECTION('',(1.,0.,0.)); +#11475 = CYLINDRICAL_SURFACE('',#11476,3.5E-02); +#11476 = AXIS2_PLACEMENT_3D('',#11477,#11478,#11479); +#11477 = CARTESIAN_POINT('',(-0.685,-0.625,3.5E-02)); +#11478 = DIRECTION('',(0.,1.,0.)); +#11479 = DIRECTION('',(1.,0.,0.)); +#11480 = ADVANCED_FACE('',(#11481),#11492,.F.); +#11481 = FACE_BOUND('',#11482,.F.); +#11482 = EDGE_LOOP('',(#11483,#11484,#11490,#11491)); +#11483 = ORIENTED_EDGE('',*,*,#10917,.T.); +#11484 = ORIENTED_EDGE('',*,*,#11485,.T.); +#11485 = EDGE_CURVE('',#10910,#11343,#11486,.T.); +#11486 = LINE('',#11487,#11488); +#11487 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11488 = VECTOR('',#11489,1.); +#11489 = DIRECTION('',(-0.,-0.,-1.)); +#11490 = ORIENTED_EDGE('',*,*,#11342,.T.); +#11491 = ORIENTED_EDGE('',*,*,#11469,.F.); +#11492 = PLANE('',#11493); +#11493 = AXIS2_PLACEMENT_3D('',#11494,#11495,#11496); +#11494 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11495 = DIRECTION('',(0.,-1.,0.)); +#11496 = DIRECTION('',(1.,0.,0.)); +#11497 = ADVANCED_FACE('',(#11498),#11509,.F.); +#11498 = FACE_BOUND('',#11499,.F.); +#11499 = EDGE_LOOP('',(#11500,#11501,#11502,#11508)); +#11500 = ORIENTED_EDGE('',*,*,#11485,.F.); +#11501 = ORIENTED_EDGE('',*,*,#10909,.T.); +#11502 = ORIENTED_EDGE('',*,*,#11503,.F.); +#11503 = EDGE_CURVE('',#11304,#10902,#11504,.T.); +#11504 = LINE('',#11505,#11506); +#11505 = CARTESIAN_POINT('',(-0.9125,0.625,0.375)); +#11506 = VECTOR('',#11507,1.); +#11507 = DIRECTION('',(0.,0.,1.)); +#11508 = ORIENTED_EDGE('',*,*,#11350,.T.); +#11509 = PLANE('',#11510); +#11510 = AXIS2_PLACEMENT_3D('',#11511,#11512,#11513); +#11511 = CARTESIAN_POINT('',(-0.9125,0.78125,0.75)); +#11512 = DIRECTION('',(-1.,0.,0.)); +#11513 = DIRECTION('',(0.,-1.,0.)); +#11514 = ADVANCED_FACE('',(#11515),#11540,.F.); +#11515 = FACE_BOUND('',#11516,.F.); +#11516 = EDGE_LOOP('',(#11517,#11518,#11526,#11534)); +#11517 = ORIENTED_EDGE('',*,*,#10893,.T.); +#11518 = ORIENTED_EDGE('',*,*,#11519,.T.); +#11519 = EDGE_CURVE('',#10886,#11520,#11522,.T.); +#11520 = VERTEX_POINT('',#11521); +#11521 = CARTESIAN_POINT('',(0.9125,0.46875,0.)); +#11522 = LINE('',#11523,#11524); +#11523 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11524 = VECTOR('',#11525,1.); +#11525 = DIRECTION('',(-0.,-0.,-1.)); +#11526 = ORIENTED_EDGE('',*,*,#11527,.T.); +#11527 = EDGE_CURVE('',#11520,#11528,#11530,.T.); +#11528 = VERTEX_POINT('',#11529); +#11529 = CARTESIAN_POINT('',(0.9125,0.625,0.)); +#11530 = LINE('',#11531,#11532); +#11531 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,0.)); +#11532 = VECTOR('',#11533,1.); +#11533 = DIRECTION('',(0.,1.,0.)); +#11534 = ORIENTED_EDGE('',*,*,#11535,.F.); +#11535 = EDGE_CURVE('',#10894,#11528,#11536,.T.); +#11536 = LINE('',#11537,#11538); +#11537 = CARTESIAN_POINT('',(0.9125,0.625,0.375)); +#11538 = VECTOR('',#11539,1.); +#11539 = DIRECTION('',(0.,0.,-1.)); +#11540 = PLANE('',#11541); +#11541 = AXIS2_PLACEMENT_3D('',#11542,#11543,#11544); +#11542 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11543 = DIRECTION('',(1.,0.,0.)); +#11544 = DIRECTION('',(-0.,1.,0.)); +#11545 = ADVANCED_FACE('',(#11546),#11565,.F.); +#11546 = FACE_BOUND('',#11547,.F.); +#11547 = EDGE_LOOP('',(#11548,#11549,#11550,#11559)); +#11548 = ORIENTED_EDGE('',*,*,#11519,.F.); +#11549 = ORIENTED_EDGE('',*,*,#10885,.T.); +#11550 = ORIENTED_EDGE('',*,*,#11551,.F.); +#11551 = EDGE_CURVE('',#11552,#10878,#11554,.T.); +#11552 = VERTEX_POINT('',#11553); +#11553 = CARTESIAN_POINT('',(0.685,0.46875,-6.938893903907E-18)); +#11554 = CIRCLE('',#11555,3.5E-02); +#11555 = AXIS2_PLACEMENT_3D('',#11556,#11557,#11558); +#11556 = CARTESIAN_POINT('',(0.685,0.46875,3.5E-02)); +#11557 = DIRECTION('',(0.,1.,-0.)); +#11558 = DIRECTION('',(-1.,0.,0.)); +#11559 = ORIENTED_EDGE('',*,*,#11560,.T.); +#11560 = EDGE_CURVE('',#11552,#11520,#11561,.T.); +#11561 = LINE('',#11562,#11563); +#11562 = CARTESIAN_POINT('',(-0.13125,0.46875,0.)); +#11563 = VECTOR('',#11564,1.); +#11564 = DIRECTION('',(1.,0.,0.)); +#11565 = PLANE('',#11566); +#11566 = AXIS2_PLACEMENT_3D('',#11567,#11568,#11569); +#11567 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11568 = DIRECTION('',(0.,-1.,0.)); +#11569 = DIRECTION('',(1.,0.,0.)); +#11570 = ADVANCED_FACE('',(#11571),#11590,.T.); +#11571 = FACE_BOUND('',#11572,.T.); +#11572 = EDGE_LOOP('',(#11573,#11574,#11582,#11589)); +#11573 = ORIENTED_EDGE('',*,*,#11551,.F.); +#11574 = ORIENTED_EDGE('',*,*,#11575,.F.); +#11575 = EDGE_CURVE('',#11576,#11552,#11578,.T.); +#11576 = VERTEX_POINT('',#11577); +#11577 = CARTESIAN_POINT('',(0.685,-0.46875,-6.938893903907E-18)); +#11578 = LINE('',#11579,#11580); +#11579 = CARTESIAN_POINT('',(0.685,-0.625,-6.938893903907E-18)); +#11580 = VECTOR('',#11581,1.); +#11581 = DIRECTION('',(0.,1.,0.)); +#11582 = ORIENTED_EDGE('',*,*,#11583,.T.); +#11583 = EDGE_CURVE('',#11576,#10870,#11584,.T.); +#11584 = CIRCLE('',#11585,3.5E-02); +#11585 = AXIS2_PLACEMENT_3D('',#11586,#11587,#11588); +#11586 = CARTESIAN_POINT('',(0.685,-0.46875,3.5E-02)); +#11587 = DIRECTION('',(0.,1.,-0.)); +#11588 = DIRECTION('',(-1.,0.,0.)); +#11589 = ORIENTED_EDGE('',*,*,#10877,.T.); +#11590 = CYLINDRICAL_SURFACE('',#11591,3.5E-02); +#11591 = AXIS2_PLACEMENT_3D('',#11592,#11593,#11594); +#11592 = CARTESIAN_POINT('',(0.685,-0.625,3.5E-02)); +#11593 = DIRECTION('',(0.,1.,0.)); +#11594 = DIRECTION('',(-1.,0.,0.)); +#11595 = ADVANCED_FACE('',(#11596),#11614,.F.); +#11596 = FACE_BOUND('',#11597,.F.); +#11597 = EDGE_LOOP('',(#11598,#11599,#11607,#11613)); +#11598 = ORIENTED_EDGE('',*,*,#10869,.T.); +#11599 = ORIENTED_EDGE('',*,*,#11600,.T.); +#11600 = EDGE_CURVE('',#10862,#11601,#11603,.T.); +#11601 = VERTEX_POINT('',#11602); +#11602 = CARTESIAN_POINT('',(0.9125,-0.46875,0.)); +#11603 = LINE('',#11604,#11605); +#11604 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11605 = VECTOR('',#11606,1.); +#11606 = DIRECTION('',(-0.,-0.,-1.)); +#11607 = ORIENTED_EDGE('',*,*,#11608,.T.); +#11608 = EDGE_CURVE('',#11601,#11576,#11609,.T.); +#11609 = LINE('',#11610,#11611); +#11610 = CARTESIAN_POINT('',(0.78125,-0.46875,0.)); +#11611 = VECTOR('',#11612,1.); +#11612 = DIRECTION('',(-1.,0.,0.)); +#11613 = ORIENTED_EDGE('',*,*,#11583,.T.); +#11614 = PLANE('',#11615); +#11615 = AXIS2_PLACEMENT_3D('',#11616,#11617,#11618); +#11616 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11617 = DIRECTION('',(0.,1.,0.)); +#11618 = DIRECTION('',(-1.,0.,0.)); +#11619 = ADVANCED_FACE('',(#11620),#11631,.F.); +#11620 = FACE_BOUND('',#11621,.F.); +#11621 = EDGE_LOOP('',(#11622,#11623,#11624,#11625)); +#11622 = ORIENTED_EDGE('',*,*,#11600,.F.); +#11623 = ORIENTED_EDGE('',*,*,#10861,.T.); +#11624 = ORIENTED_EDGE('',*,*,#10983,.T.); +#11625 = ORIENTED_EDGE('',*,*,#11626,.T.); +#11626 = EDGE_CURVE('',#10974,#11601,#11627,.T.); +#11627 = LINE('',#11628,#11629); +#11628 = CARTESIAN_POINT('',(0.9125,-0.703125,0.)); +#11629 = VECTOR('',#11630,1.); +#11630 = DIRECTION('',(0.,1.,0.)); +#11631 = PLANE('',#11632); +#11632 = AXIS2_PLACEMENT_3D('',#11633,#11634,#11635); +#11633 = CARTESIAN_POINT('',(0.9125,-0.78125,0.75)); +#11634 = DIRECTION('',(1.,0.,0.)); +#11635 = DIRECTION('',(-0.,1.,0.)); +#11636 = ADVANCED_FACE('',(#11637),#11662,.T.); +#11637 = FACE_BOUND('',#11638,.T.); +#11638 = EDGE_LOOP('',(#11639,#11647,#11648,#11656)); +#11639 = ORIENTED_EDGE('',*,*,#11640,.T.); +#11640 = EDGE_CURVE('',#11641,#10942,#11643,.T.); +#11641 = VERTEX_POINT('',#11642); +#11642 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11643 = LINE('',#11644,#11645); +#11644 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11645 = VECTOR('',#11646,1.); +#11646 = DIRECTION('',(0.,0.,1.)); +#11647 = ORIENTED_EDGE('',*,*,#10941,.T.); +#11648 = ORIENTED_EDGE('',*,*,#11649,.F.); +#11649 = EDGE_CURVE('',#11650,#10944,#11652,.T.); +#11650 = VERTEX_POINT('',#11651); +#11651 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11652 = LINE('',#11653,#11654); +#11653 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11654 = VECTOR('',#11655,1.); +#11655 = DIRECTION('',(0.,0.,1.)); +#11656 = ORIENTED_EDGE('',*,*,#11657,.F.); +#11657 = EDGE_CURVE('',#11641,#11650,#11658,.T.); +#11658 = LINE('',#11659,#11660); +#11659 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11660 = VECTOR('',#11661,1.); +#11661 = DIRECTION('',(0.,-1.,0.)); +#11662 = PLANE('',#11663); +#11663 = AXIS2_PLACEMENT_3D('',#11664,#11665,#11666); +#11664 = CARTESIAN_POINT('',(0.433012701892,0.5,1.75E-02)); +#11665 = DIRECTION('',(1.,0.,0.)); +#11666 = DIRECTION('',(0.,-1.,0.)); +#11667 = ADVANCED_FACE('',(#11668),#11686,.T.); +#11668 = FACE_BOUND('',#11669,.T.); +#11669 = EDGE_LOOP('',(#11670,#11678,#11679,#11680)); +#11670 = ORIENTED_EDGE('',*,*,#11671,.T.); +#11671 = EDGE_CURVE('',#11672,#10952,#11674,.T.); +#11672 = VERTEX_POINT('',#11673); +#11673 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11674 = LINE('',#11675,#11676); +#11675 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11676 = VECTOR('',#11677,1.); +#11677 = DIRECTION('',(0.,0.,1.)); +#11678 = ORIENTED_EDGE('',*,*,#10959,.T.); +#11679 = ORIENTED_EDGE('',*,*,#11640,.F.); +#11680 = ORIENTED_EDGE('',*,*,#11681,.F.); +#11681 = EDGE_CURVE('',#11672,#11641,#11682,.T.); +#11682 = LINE('',#11683,#11684); +#11683 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11684 = VECTOR('',#11685,1.); +#11685 = DIRECTION('',(0.866025403784,0.5,0.)); +#11686 = PLANE('',#11687); +#11687 = AXIS2_PLACEMENT_3D('',#11688,#11689,#11690); +#11688 = CARTESIAN_POINT('',(-0.433012701892,0.,1.75E-02)); +#11689 = DIRECTION('',(-0.5,0.866025403784,0.)); +#11690 = DIRECTION('',(0.866025403784,0.5,0.)); +#11691 = ADVANCED_FACE('',(#11692),#11703,.T.); +#11692 = FACE_BOUND('',#11693,.T.); +#11693 = EDGE_LOOP('',(#11694,#11695,#11696,#11697)); +#11694 = ORIENTED_EDGE('',*,*,#11649,.T.); +#11695 = ORIENTED_EDGE('',*,*,#10951,.T.); +#11696 = ORIENTED_EDGE('',*,*,#11671,.F.); +#11697 = ORIENTED_EDGE('',*,*,#11698,.F.); +#11698 = EDGE_CURVE('',#11650,#11672,#11699,.T.); +#11699 = LINE('',#11700,#11701); +#11700 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11701 = VECTOR('',#11702,1.); +#11702 = DIRECTION('',(-0.866025403784,0.5,0.)); +#11703 = PLANE('',#11704); +#11704 = AXIS2_PLACEMENT_3D('',#11705,#11706,#11707); +#11705 = CARTESIAN_POINT('',(0.433012701892,-0.5,1.75E-02)); +#11706 = DIRECTION('',(-0.5,-0.866025403784,0.)); +#11707 = DIRECTION('',(-0.866025403784,0.5,0.)); +#11708 = ADVANCED_FACE('',(#11709),#11731,.F.); +#11709 = FACE_BOUND('',#11710,.F.); +#11710 = EDGE_LOOP('',(#11711,#11719,#11720,#11721,#11722,#11723,#11724, + #11725)); +#11711 = ORIENTED_EDGE('',*,*,#11712,.F.); +#11712 = EDGE_CURVE('',#11528,#11713,#11715,.T.); +#11713 = VERTEX_POINT('',#11714); +#11714 = CARTESIAN_POINT('',(0.965,0.625,-6.938893903907E-18)); +#11715 = LINE('',#11716,#11717); +#11716 = CARTESIAN_POINT('',(0.65,0.625,0.)); +#11717 = VECTOR('',#11718,1.); +#11718 = DIRECTION('',(1.,0.,0.)); +#11719 = ORIENTED_EDGE('',*,*,#11527,.F.); +#11720 = ORIENTED_EDGE('',*,*,#11560,.F.); +#11721 = ORIENTED_EDGE('',*,*,#11575,.F.); +#11722 = ORIENTED_EDGE('',*,*,#11608,.F.); +#11723 = ORIENTED_EDGE('',*,*,#11626,.F.); +#11724 = ORIENTED_EDGE('',*,*,#10973,.T.); +#11725 = ORIENTED_EDGE('',*,*,#11726,.T.); +#11726 = EDGE_CURVE('',#10976,#11713,#11727,.T.); +#11727 = LINE('',#11728,#11729); +#11728 = CARTESIAN_POINT('',(0.965,-0.625,-6.938893903907E-18)); +#11729 = VECTOR('',#11730,1.); +#11730 = DIRECTION('',(0.,1.,0.)); +#11731 = PLANE('',#11732); +#11732 = AXIS2_PLACEMENT_3D('',#11733,#11734,#11735); +#11733 = CARTESIAN_POINT('',(0.65,-0.625,0.)); +#11734 = DIRECTION('',(0.,0.,1.)); +#11735 = DIRECTION('',(1.,0.,-0.)); +#11736 = ADVANCED_FACE('',(#11737),#11756,.T.); +#11737 = FACE_BOUND('',#11738,.T.); +#11738 = EDGE_LOOP('',(#11739,#11740,#11741,#11750)); +#11739 = ORIENTED_EDGE('',*,*,#11025,.T.); +#11740 = ORIENTED_EDGE('',*,*,#11726,.T.); +#11741 = ORIENTED_EDGE('',*,*,#11742,.F.); +#11742 = EDGE_CURVE('',#11743,#11713,#11745,.T.); +#11743 = VERTEX_POINT('',#11744); +#11744 = CARTESIAN_POINT('',(1.,0.625,3.5E-02)); +#11745 = CIRCLE('',#11746,3.5E-02); +#11746 = AXIS2_PLACEMENT_3D('',#11747,#11748,#11749); +#11747 = CARTESIAN_POINT('',(0.965,0.625,3.5E-02)); +#11748 = DIRECTION('',(0.,1.,0.)); +#11749 = DIRECTION('',(0.,-0.,1.)); +#11750 = ORIENTED_EDGE('',*,*,#11751,.F.); +#11751 = EDGE_CURVE('',#11018,#11743,#11752,.T.); +#11752 = LINE('',#11753,#11754); +#11753 = CARTESIAN_POINT('',(1.,-0.625,3.5E-02)); +#11754 = VECTOR('',#11755,1.); +#11755 = DIRECTION('',(0.,1.,0.)); +#11756 = CYLINDRICAL_SURFACE('',#11757,3.5E-02); +#11757 = AXIS2_PLACEMENT_3D('',#11758,#11759,#11760); +#11758 = CARTESIAN_POINT('',(0.965,-0.625,3.5E-02)); +#11759 = DIRECTION('',(0.,1.,0.)); +#11760 = DIRECTION('',(1.,0.,0.)); +#11761 = ADVANCED_FACE('',(#11762),#11780,.T.); +#11762 = FACE_BOUND('',#11763,.T.); +#11763 = EDGE_LOOP('',(#11764,#11765,#11766,#11774)); +#11764 = ORIENTED_EDGE('',*,*,#11017,.F.); +#11765 = ORIENTED_EDGE('',*,*,#11751,.T.); +#11766 = ORIENTED_EDGE('',*,*,#11767,.T.); +#11767 = EDGE_CURVE('',#11743,#11768,#11770,.T.); +#11768 = VERTEX_POINT('',#11769); +#11769 = CARTESIAN_POINT('',(1.,0.625,0.465)); +#11770 = LINE('',#11771,#11772); +#11771 = CARTESIAN_POINT('',(1.,0.625,0.)); +#11772 = VECTOR('',#11773,1.); +#11773 = DIRECTION('',(0.,0.,1.)); +#11774 = ORIENTED_EDGE('',*,*,#11775,.F.); +#11775 = EDGE_CURVE('',#11009,#11768,#11776,.T.); +#11776 = LINE('',#11777,#11778); +#11777 = CARTESIAN_POINT('',(1.,-0.625,0.465)); +#11778 = VECTOR('',#11779,1.); +#11779 = DIRECTION('',(0.,1.,0.)); +#11780 = PLANE('',#11781); +#11781 = AXIS2_PLACEMENT_3D('',#11782,#11783,#11784); +#11782 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#11783 = DIRECTION('',(1.,0.,0.)); +#11784 = DIRECTION('',(0.,0.,1.)); +#11785 = ADVANCED_FACE('',(#11786),#11805,.T.); +#11786 = FACE_BOUND('',#11787,.T.); +#11787 = EDGE_LOOP('',(#11788,#11789,#11798,#11804)); +#11788 = ORIENTED_EDGE('',*,*,#11775,.T.); +#11789 = ORIENTED_EDGE('',*,*,#11790,.T.); +#11790 = EDGE_CURVE('',#11768,#11791,#11793,.T.); +#11791 = VERTEX_POINT('',#11792); +#11792 = CARTESIAN_POINT('',(0.965,0.625,0.5)); +#11793 = CIRCLE('',#11794,3.5E-02); +#11794 = AXIS2_PLACEMENT_3D('',#11795,#11796,#11797); +#11795 = CARTESIAN_POINT('',(0.965,0.625,0.465)); +#11796 = DIRECTION('',(0.,-1.,0.)); +#11797 = DIRECTION('',(0.,0.,1.)); +#11798 = ORIENTED_EDGE('',*,*,#11799,.F.); +#11799 = EDGE_CURVE('',#11001,#11791,#11800,.T.); +#11800 = LINE('',#11801,#11802); +#11801 = CARTESIAN_POINT('',(0.965,-0.625,0.5)); +#11802 = VECTOR('',#11803,1.); +#11803 = DIRECTION('',(0.,1.,0.)); +#11804 = ORIENTED_EDGE('',*,*,#11008,.F.); +#11805 = CYLINDRICAL_SURFACE('',#11806,3.5E-02); +#11806 = AXIS2_PLACEMENT_3D('',#11807,#11808,#11809); +#11807 = CARTESIAN_POINT('',(0.965,-0.625,0.465)); +#11808 = DIRECTION('',(0.,1.,0.)); +#11809 = DIRECTION('',(1.,0.,0.)); +#11810 = ADVANCED_FACE('',(#11811),#11852,.T.); +#11811 = FACE_BOUND('',#11812,.T.); +#11812 = EDGE_LOOP('',(#11813,#11821,#11829,#11835,#11836,#11844,#11850, + #11851)); +#11813 = ORIENTED_EDGE('',*,*,#11814,.F.); +#11814 = EDGE_CURVE('',#11815,#11791,#11817,.T.); +#11815 = VERTEX_POINT('',#11816); +#11816 = CARTESIAN_POINT('',(0.9125,0.625,0.5)); +#11817 = LINE('',#11818,#11819); +#11818 = CARTESIAN_POINT('',(0.65,0.625,0.5)); +#11819 = VECTOR('',#11820,1.); +#11820 = DIRECTION('',(1.,0.,0.)); +#11821 = ORIENTED_EDGE('',*,*,#11822,.F.); +#11822 = EDGE_CURVE('',#11823,#11815,#11825,.T.); +#11823 = VERTEX_POINT('',#11824); +#11824 = CARTESIAN_POINT('',(0.9125,0.46875,0.5)); +#11825 = LINE('',#11826,#11827); +#11826 = CARTESIAN_POINT('',(0.9125,-7.8125E-02,0.5)); +#11827 = VECTOR('',#11828,1.); +#11828 = DIRECTION('',(0.,1.,0.)); +#11829 = ORIENTED_EDGE('',*,*,#11830,.F.); +#11830 = EDGE_CURVE('',#11106,#11823,#11831,.T.); +#11831 = LINE('',#11832,#11833); +#11832 = CARTESIAN_POINT('',(-0.13125,0.46875,0.5)); +#11833 = VECTOR('',#11834,1.); +#11834 = DIRECTION('',(1.,0.,0.)); +#11835 = ORIENTED_EDGE('',*,*,#11105,.F.); +#11836 = ORIENTED_EDGE('',*,*,#11837,.F.); +#11837 = EDGE_CURVE('',#11838,#11097,#11840,.T.); +#11838 = VERTEX_POINT('',#11839); +#11839 = CARTESIAN_POINT('',(0.9125,-0.46875,0.5)); +#11840 = LINE('',#11841,#11842); +#11841 = CARTESIAN_POINT('',(0.78125,-0.46875,0.5)); +#11842 = VECTOR('',#11843,1.); +#11843 = DIRECTION('',(-1.,0.,0.)); +#11844 = ORIENTED_EDGE('',*,*,#11845,.F.); +#11845 = EDGE_CURVE('',#10993,#11838,#11846,.T.); +#11846 = LINE('',#11847,#11848); +#11847 = CARTESIAN_POINT('',(0.9125,-0.703125,0.5)); +#11848 = VECTOR('',#11849,1.); +#11849 = DIRECTION('',(0.,1.,0.)); +#11850 = ORIENTED_EDGE('',*,*,#11000,.T.); +#11851 = ORIENTED_EDGE('',*,*,#11799,.T.); +#11852 = PLANE('',#11853); +#11853 = AXIS2_PLACEMENT_3D('',#11854,#11855,#11856); +#11854 = CARTESIAN_POINT('',(0.65,-0.625,0.5)); +#11855 = DIRECTION('',(0.,0.,1.)); +#11856 = DIRECTION('',(1.,0.,-0.)); +#11857 = ADVANCED_FACE('',(#11858),#11869,.F.); +#11858 = FACE_BOUND('',#11859,.F.); +#11859 = EDGE_LOOP('',(#11860,#11866,#11867,#11868)); +#11860 = ORIENTED_EDGE('',*,*,#11861,.F.); +#11861 = EDGE_CURVE('',#11838,#11041,#11862,.T.); +#11862 = LINE('',#11863,#11864); +#11863 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11864 = VECTOR('',#11865,1.); +#11865 = DIRECTION('',(-0.,-0.,-1.)); +#11866 = ORIENTED_EDGE('',*,*,#11845,.F.); +#11867 = ORIENTED_EDGE('',*,*,#10992,.T.); +#11868 = ORIENTED_EDGE('',*,*,#11050,.F.); +#11869 = PLANE('',#11870); +#11870 = AXIS2_PLACEMENT_3D('',#11871,#11872,#11873); +#11871 = CARTESIAN_POINT('',(0.9125,-0.78125,0.75)); +#11872 = DIRECTION('',(1.,0.,0.)); +#11873 = DIRECTION('',(-0.,1.,0.)); +#11874 = ADVANCED_FACE('',(#11875),#11881,.F.); +#11875 = FACE_BOUND('',#11876,.F.); +#11876 = EDGE_LOOP('',(#11877,#11878,#11879,#11880)); +#11877 = ORIENTED_EDGE('',*,*,#11837,.F.); +#11878 = ORIENTED_EDGE('',*,*,#11861,.T.); +#11879 = ORIENTED_EDGE('',*,*,#11040,.F.); +#11880 = ORIENTED_EDGE('',*,*,#11096,.T.); +#11881 = PLANE('',#11882); +#11882 = AXIS2_PLACEMENT_3D('',#11883,#11884,#11885); +#11883 = CARTESIAN_POINT('',(0.9125,-0.46875,0.75)); +#11884 = DIRECTION('',(0.,1.,0.)); +#11885 = DIRECTION('',(-1.,0.,0.)); +#11886 = ADVANCED_FACE('',(#11887),#11903,.F.); +#11887 = FACE_BOUND('',#11888,.F.); +#11888 = EDGE_LOOP('',(#11889,#11890,#11896,#11897)); +#11889 = ORIENTED_EDGE('',*,*,#11822,.F.); +#11890 = ORIENTED_EDGE('',*,*,#11891,.T.); +#11891 = EDGE_CURVE('',#11823,#11074,#11892,.T.); +#11892 = LINE('',#11893,#11894); +#11893 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11894 = VECTOR('',#11895,1.); +#11895 = DIRECTION('',(-0.,-0.,-1.)); +#11896 = ORIENTED_EDGE('',*,*,#11081,.F.); +#11897 = ORIENTED_EDGE('',*,*,#11898,.F.); +#11898 = EDGE_CURVE('',#11815,#11065,#11899,.T.); +#11899 = LINE('',#11900,#11901); +#11900 = CARTESIAN_POINT('',(0.9125,0.625,0.375)); +#11901 = VECTOR('',#11902,1.); +#11902 = DIRECTION('',(0.,0.,-1.)); +#11903 = PLANE('',#11904); +#11904 = AXIS2_PLACEMENT_3D('',#11905,#11906,#11907); +#11905 = CARTESIAN_POINT('',(0.9125,0.46875,0.75)); +#11906 = DIRECTION('',(1.,0.,0.)); +#11907 = DIRECTION('',(-0.,1.,0.)); +#11908 = ADVANCED_FACE('',(#11909),#11915,.F.); +#11909 = FACE_BOUND('',#11910,.F.); +#11910 = EDGE_LOOP('',(#11911,#11912,#11913,#11914)); +#11911 = ORIENTED_EDGE('',*,*,#11891,.F.); +#11912 = ORIENTED_EDGE('',*,*,#11830,.F.); +#11913 = ORIENTED_EDGE('',*,*,#11113,.F.); +#11914 = ORIENTED_EDGE('',*,*,#11073,.F.); +#11915 = PLANE('',#11916); +#11916 = AXIS2_PLACEMENT_3D('',#11917,#11918,#11919); +#11917 = CARTESIAN_POINT('',(-0.9125,0.46875,0.75)); +#11918 = DIRECTION('',(0.,-1.,0.)); +#11919 = DIRECTION('',(1.,0.,0.)); +#11920 = ADVANCED_FACE('',(#11921),#11933,.T.); +#11921 = FACE_BOUND('',#11922,.T.); +#11922 = EDGE_LOOP('',(#11923,#11924,#11925,#11926,#11927,#11928,#11929, + #11930,#11931,#11932)); +#11923 = ORIENTED_EDGE('',*,*,#11301,.F.); +#11924 = ORIENTED_EDGE('',*,*,#11372,.F.); +#11925 = ORIENTED_EDGE('',*,*,#11408,.T.); +#11926 = ORIENTED_EDGE('',*,*,#11432,.T.); +#11927 = ORIENTED_EDGE('',*,*,#11256,.T.); +#11928 = ORIENTED_EDGE('',*,*,#11217,.F.); +#11929 = ORIENTED_EDGE('',*,*,#11144,.F.); +#11930 = ORIENTED_EDGE('',*,*,#11136,.F.); +#11931 = ORIENTED_EDGE('',*,*,#11128,.T.); +#11932 = ORIENTED_EDGE('',*,*,#11503,.F.); +#11933 = PLANE('',#11934); +#11934 = AXIS2_PLACEMENT_3D('',#11935,#11936,#11937); +#11935 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#11936 = DIRECTION('',(0.,1.,0.)); +#11937 = DIRECTION('',(0.,-0.,1.)); +#11938 = ADVANCED_FACE('',(#11939),#11951,.T.); +#11939 = FACE_BOUND('',#11940,.T.); +#11940 = EDGE_LOOP('',(#11941,#11942,#11943,#11944,#11945,#11946,#11947, + #11948,#11949,#11950)); +#11941 = ORIENTED_EDGE('',*,*,#11712,.F.); +#11942 = ORIENTED_EDGE('',*,*,#11535,.F.); +#11943 = ORIENTED_EDGE('',*,*,#11169,.T.); +#11944 = ORIENTED_EDGE('',*,*,#11161,.T.); +#11945 = ORIENTED_EDGE('',*,*,#11153,.F.); +#11946 = ORIENTED_EDGE('',*,*,#11898,.F.); +#11947 = ORIENTED_EDGE('',*,*,#11814,.T.); +#11948 = ORIENTED_EDGE('',*,*,#11790,.F.); +#11949 = ORIENTED_EDGE('',*,*,#11767,.F.); +#11950 = ORIENTED_EDGE('',*,*,#11742,.T.); +#11951 = PLANE('',#11952); +#11952 = AXIS2_PLACEMENT_3D('',#11953,#11954,#11955); +#11953 = CARTESIAN_POINT('',(0.65,0.625,0.)); +#11954 = DIRECTION('',(0.,1.,0.)); +#11955 = DIRECTION('',(0.,-0.,1.)); +#11956 = ADVANCED_FACE('',(#11957),#11962,.T.); +#11957 = FACE_BOUND('',#11958,.T.); +#11958 = EDGE_LOOP('',(#11959,#11960,#11961)); +#11959 = ORIENTED_EDGE('',*,*,#11681,.T.); +#11960 = ORIENTED_EDGE('',*,*,#11657,.T.); +#11961 = ORIENTED_EDGE('',*,*,#11698,.T.); +#11962 = PLANE('',#11963); +#11963 = AXIS2_PLACEMENT_3D('',#11964,#11965,#11966); +#11964 = CARTESIAN_POINT('',(0.144337567297,9.251858538543E-18,1.75E-02) + ); +#11965 = DIRECTION('',(-0.,-0.,-1.)); +#11966 = DIRECTION('',(-1.,0.,0.)); +#11967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#11971)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#11968,#11969,#11970)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#11968 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#11969 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#11970 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#11971 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#11968, + 'distance_accuracy_value','confusion accuracy'); +#11972 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#11973,#11975); +#11973 = ( REPRESENTATION_RELATIONSHIP('','',#10443,#10420) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#11974) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#11974 = ITEM_DEFINED_TRANSFORMATION('','',#11,#10421); +#11975 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #11976); +#11976 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','=>[0:1:1:11]','',#10415, + #10438,$); +#11977 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#10440)); +#11978 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#11979,#11981); +#11979 = ( REPRESENTATION_RELATIONSHIP('','',#1360,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#11980) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#11980 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43); +#11981 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #11982); +#11982 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','P4','',#5,#1355,$); +#11983 = SHAPE_DEFINITION_REPRESENTATION(#11984,#11990); +#11984 = PRODUCT_DEFINITION_SHAPE('','',#11985); +#11985 = PRODUCT_DEFINITION('design','',#11986,#11989); +#11986 = PRODUCT_DEFINITION_FORMATION('','',#11987); +#11987 = PRODUCT('JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical', + 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical','',(#11988)); +#11988 = PRODUCT_CONTEXT('',#2,'mechanical'); +#11989 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#11990 = SHAPE_REPRESENTATION('',(#11,#11991),#11995); +#11991 = AXIS2_PLACEMENT_3D('',#11992,#11993,#11994); +#11992 = CARTESIAN_POINT('',(0.,0.,0.)); +#11993 = DIRECTION('',(0.,0.,1.)); +#11994 = DIRECTION('',(1.,0.,-0.)); +#11995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#11999)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#11996,#11997,#11998)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#11996 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#11997 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#11998 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#11999 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#11996, + 'distance_accuracy_value','confusion accuracy'); +#12000 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12001,#12003); +#12001 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12002) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12002 = ITEM_DEFINED_TRANSFORMATION('','',#11,#47); +#12003 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12004); +#12004 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','P10','',#5,#11985,$); +#12005 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#11987)); +#12006 = SHAPE_DEFINITION_REPRESENTATION(#12007,#12013); +#12007 = PRODUCT_DEFINITION_SHAPE('','',#12008); +#12008 = PRODUCT_DEFINITION('design','',#12009,#12012); +#12009 = PRODUCT_DEFINITION_FORMATION('','',#12010); +#12010 = PRODUCT('JST_B2B_XH_A','JST_B2B_XH_A','',(#12011)); +#12011 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12012 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12013 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#12014),#14729); +#12014 = MANIFOLD_SOLID_BREP('',#12015); +#12015 = CLOSED_SHELL('',(#12016,#12088,#12127,#12151,#12216,#12240, + #12328,#12352,#12417,#12442,#12491,#12508,#12532,#12549,#12687, + #12711,#12881,#12905,#12938,#12962,#12993,#13010,#13043,#13067, + #13098,#13110,#13143,#13160,#13177,#13189,#13269,#13286,#13303, + #13320,#13337,#13354,#13371,#13388,#13405,#13422,#13439,#13451, + #13468,#13485,#13531,#13577,#13608,#13632,#13656,#13673,#13704, + #13728,#13752,#13769,#13832,#13856,#13912,#13929,#13992,#14016, + #14072,#14089,#14120,#14144,#14168,#14185,#14216,#14240,#14264, + #14281,#14328,#14359,#14371,#14388,#14414,#14447,#14494,#14525, + #14537,#14554,#14580,#14613,#14625,#14637,#14654,#14671,#14683, + #14700,#14717)); +#12016 = ADVANCED_FACE('',(#12017),#12083,.T.); +#12017 = FACE_BOUND('',#12018,.T.); +#12018 = EDGE_LOOP('',(#12019,#12029,#12037,#12045,#12053,#12061,#12069, + #12077)); +#12019 = ORIENTED_EDGE('',*,*,#12020,.T.); +#12020 = EDGE_CURVE('',#12021,#12023,#12025,.T.); +#12021 = VERTEX_POINT('',#12022); +#12022 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#12023 = VERTEX_POINT('',#12024); +#12024 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#12025 = LINE('',#12026,#12027); +#12026 = CARTESIAN_POINT('',(4.95,0.5,7.)); +#12027 = VECTOR('',#12028,1.); +#12028 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12029 = ORIENTED_EDGE('',*,*,#12030,.T.); +#12030 = EDGE_CURVE('',#12023,#12031,#12033,.T.); +#12031 = VERTEX_POINT('',#12032); +#12032 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#12033 = LINE('',#12034,#12035); +#12034 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#12035 = VECTOR('',#12036,1.); +#12036 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12037 = ORIENTED_EDGE('',*,*,#12038,.T.); +#12038 = EDGE_CURVE('',#12031,#12039,#12041,.T.); +#12039 = VERTEX_POINT('',#12040); +#12040 = CARTESIAN_POINT('',(4.95,-3.4,7.)); +#12041 = LINE('',#12042,#12043); +#12042 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#12043 = VECTOR('',#12044,1.); +#12044 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12045 = ORIENTED_EDGE('',*,*,#12046,.T.); +#12046 = EDGE_CURVE('',#12039,#12047,#12049,.T.); +#12047 = VERTEX_POINT('',#12048); +#12048 = CARTESIAN_POINT('',(4.95,0.5,7.)); +#12049 = LINE('',#12050,#12051); +#12050 = CARTESIAN_POINT('',(4.95,-3.4,7.)); +#12051 = VECTOR('',#12052,1.); +#12052 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12053 = ORIENTED_EDGE('',*,*,#12054,.T.); +#12054 = EDGE_CURVE('',#12047,#12055,#12057,.T.); +#12055 = VERTEX_POINT('',#12056); +#12056 = CARTESIAN_POINT('',(4.3,0.5,7.)); +#12057 = LINE('',#12058,#12059); +#12058 = CARTESIAN_POINT('',(4.95,0.5,7.)); +#12059 = VECTOR('',#12060,1.); +#12060 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12061 = ORIENTED_EDGE('',*,*,#12062,.F.); +#12062 = EDGE_CURVE('',#12063,#12055,#12065,.T.); +#12063 = VERTEX_POINT('',#12064); +#12064 = CARTESIAN_POINT('',(4.3,-2.85,7.)); +#12065 = LINE('',#12066,#12067); +#12066 = CARTESIAN_POINT('',(4.3,-2.65,7.)); +#12067 = VECTOR('',#12068,1.); +#12068 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12069 = ORIENTED_EDGE('',*,*,#12070,.F.); +#12070 = EDGE_CURVE('',#12071,#12063,#12073,.T.); +#12071 = VERTEX_POINT('',#12072); +#12072 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#12073 = LINE('',#12074,#12075); +#12074 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#12075 = VECTOR('',#12076,1.); +#12076 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12077 = ORIENTED_EDGE('',*,*,#12078,.F.); +#12078 = EDGE_CURVE('',#12021,#12071,#12079,.T.); +#12079 = LINE('',#12080,#12081); +#12080 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#12081 = VECTOR('',#12082,1.); +#12082 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12083 = PLANE('',#12084); +#12084 = AXIS2_PLACEMENT_3D('',#12085,#12086,#12087); +#12085 = CARTESIAN_POINT('',(1.25,-0.525,7.)); +#12086 = DIRECTION('',(0.,0.,1.)); +#12087 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12088 = ADVANCED_FACE('',(#12089),#12122,.T.); +#12089 = FACE_BOUND('',#12090,.T.); +#12090 = EDGE_LOOP('',(#12091,#12101,#12109,#12115,#12116)); +#12091 = ORIENTED_EDGE('',*,*,#12092,.T.); +#12092 = EDGE_CURVE('',#12093,#12095,#12097,.T.); +#12093 = VERTEX_POINT('',#12094); +#12094 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#12095 = VERTEX_POINT('',#12096); +#12096 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#12097 = LINE('',#12098,#12099); +#12098 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#12099 = VECTOR('',#12100,1.); +#12100 = DIRECTION('',(-0.,0.,-1.)); +#12101 = ORIENTED_EDGE('',*,*,#12102,.T.); +#12102 = EDGE_CURVE('',#12095,#12103,#12105,.T.); +#12103 = VERTEX_POINT('',#12104); +#12104 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#12105 = LINE('',#12106,#12107); +#12106 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12107 = VECTOR('',#12108,1.); +#12108 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12109 = ORIENTED_EDGE('',*,*,#12110,.T.); +#12110 = EDGE_CURVE('',#12103,#12023,#12111,.T.); +#12111 = LINE('',#12112,#12113); +#12112 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#12113 = VECTOR('',#12114,1.); +#12114 = DIRECTION('',(0.,0.,1.)); +#12115 = ORIENTED_EDGE('',*,*,#12020,.F.); +#12116 = ORIENTED_EDGE('',*,*,#12117,.T.); +#12117 = EDGE_CURVE('',#12021,#12093,#12118,.T.); +#12118 = LINE('',#12119,#12120); +#12119 = CARTESIAN_POINT('',(0.775,0.5,4.425)); +#12120 = VECTOR('',#12121,1.); +#12121 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#12122 = PLANE('',#12123); +#12123 = AXIS2_PLACEMENT_3D('',#12124,#12125,#12126); +#12124 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12125 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12126 = DIRECTION('',(0.,-0.,1.)); +#12127 = ADVANCED_FACE('',(#12128),#12146,.F.); +#12128 = FACE_BOUND('',#12129,.T.); +#12129 = EDGE_LOOP('',(#12130,#12131,#12132,#12140)); +#12130 = ORIENTED_EDGE('',*,*,#12117,.F.); +#12131 = ORIENTED_EDGE('',*,*,#12078,.T.); +#12132 = ORIENTED_EDGE('',*,*,#12133,.T.); +#12133 = EDGE_CURVE('',#12071,#12134,#12136,.T.); +#12134 = VERTEX_POINT('',#12135); +#12135 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#12136 = LINE('',#12137,#12138); +#12137 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#12138 = VECTOR('',#12139,1.); +#12139 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#12140 = ORIENTED_EDGE('',*,*,#12141,.F.); +#12141 = EDGE_CURVE('',#12093,#12134,#12142,.T.); +#12142 = LINE('',#12143,#12144); +#12143 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#12144 = VECTOR('',#12145,1.); +#12145 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12146 = PLANE('',#12147); +#12147 = AXIS2_PLACEMENT_3D('',#12148,#12149,#12150); +#12148 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#12149 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#12150 = DIRECTION('',(1.224646799147E-16,1.,-2.103984282776E-29)); +#12151 = ADVANCED_FACE('',(#12152),#12211,.F.); +#12152 = FACE_BOUND('',#12153,.F.); +#12153 = EDGE_LOOP('',(#12154,#12164,#12172,#12180,#12188,#12197,#12203, + #12204,#12205)); +#12154 = ORIENTED_EDGE('',*,*,#12155,.F.); +#12155 = EDGE_CURVE('',#12156,#12158,#12160,.T.); +#12156 = VERTEX_POINT('',#12157); +#12157 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12158 = VERTEX_POINT('',#12159); +#12159 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12160 = LINE('',#12161,#12162); +#12161 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12162 = VECTOR('',#12163,1.); +#12163 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12164 = ORIENTED_EDGE('',*,*,#12165,.T.); +#12165 = EDGE_CURVE('',#12156,#12166,#12168,.T.); +#12166 = VERTEX_POINT('',#12167); +#12167 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#12168 = LINE('',#12169,#12170); +#12169 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12170 = VECTOR('',#12171,1.); +#12171 = DIRECTION('',(0.,0.,1.)); +#12172 = ORIENTED_EDGE('',*,*,#12173,.T.); +#12173 = EDGE_CURVE('',#12166,#12174,#12176,.T.); +#12174 = VERTEX_POINT('',#12175); +#12175 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#12176 = LINE('',#12177,#12178); +#12177 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#12178 = VECTOR('',#12179,1.); +#12179 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12180 = ORIENTED_EDGE('',*,*,#12181,.T.); +#12181 = EDGE_CURVE('',#12174,#12182,#12184,.T.); +#12182 = VERTEX_POINT('',#12183); +#12183 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#12184 = LINE('',#12185,#12186); +#12185 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#12186 = VECTOR('',#12187,1.); +#12187 = DIRECTION('',(-0.,0.,-1.)); +#12188 = ORIENTED_EDGE('',*,*,#12189,.F.); +#12189 = EDGE_CURVE('',#12190,#12182,#12192,.T.); +#12190 = VERTEX_POINT('',#12191); +#12191 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#12192 = CIRCLE('',#12193,0.5); +#12193 = AXIS2_PLACEMENT_3D('',#12194,#12195,#12196); +#12194 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#12195 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12196 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12197 = ORIENTED_EDGE('',*,*,#12198,.T.); +#12198 = EDGE_CURVE('',#12190,#12103,#12199,.T.); +#12199 = LINE('',#12200,#12201); +#12200 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#12201 = VECTOR('',#12202,1.); +#12202 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12203 = ORIENTED_EDGE('',*,*,#12110,.T.); +#12204 = ORIENTED_EDGE('',*,*,#12030,.T.); +#12205 = ORIENTED_EDGE('',*,*,#12206,.F.); +#12206 = EDGE_CURVE('',#12158,#12031,#12207,.T.); +#12207 = LINE('',#12208,#12209); +#12208 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12209 = VECTOR('',#12210,1.); +#12210 = DIRECTION('',(0.,0.,1.)); +#12211 = PLANE('',#12212); +#12212 = AXIS2_PLACEMENT_3D('',#12213,#12214,#12215); +#12213 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#12214 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12215 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12216 = ADVANCED_FACE('',(#12217),#12235,.F.); +#12217 = FACE_BOUND('',#12218,.T.); +#12218 = EDGE_LOOP('',(#12219,#12220,#12221,#12229)); +#12219 = ORIENTED_EDGE('',*,*,#12133,.F.); +#12220 = ORIENTED_EDGE('',*,*,#12070,.T.); +#12221 = ORIENTED_EDGE('',*,*,#12222,.T.); +#12222 = EDGE_CURVE('',#12063,#12223,#12225,.T.); +#12223 = VERTEX_POINT('',#12224); +#12224 = CARTESIAN_POINT('',(4.1,-2.65,6.8)); +#12225 = LINE('',#12226,#12227); +#12226 = CARTESIAN_POINT('',(3.216666666667,-1.766666666667, + 5.916666666667)); +#12227 = VECTOR('',#12228,1.); +#12228 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#12229 = ORIENTED_EDGE('',*,*,#12230,.F.); +#12230 = EDGE_CURVE('',#12134,#12223,#12231,.T.); +#12231 = LINE('',#12232,#12233); +#12232 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#12233 = VECTOR('',#12234,1.); +#12234 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12235 = PLANE('',#12236); +#12236 = AXIS2_PLACEMENT_3D('',#12237,#12238,#12239); +#12237 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#12238 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#12239 = DIRECTION('',(-1.,1.224646799147E-16,-2.105273685727E-29)); +#12240 = ADVANCED_FACE('',(#12241),#12323,.F.); +#12241 = FACE_BOUND('',#12242,.F.); +#12242 = EDGE_LOOP('',(#12243,#12251,#12252,#12253,#12261,#12269,#12277, + #12285,#12293,#12301,#12309,#12317)); +#12243 = ORIENTED_EDGE('',*,*,#12244,.F.); +#12244 = EDGE_CURVE('',#12158,#12245,#12247,.T.); +#12245 = VERTEX_POINT('',#12246); +#12246 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#12247 = LINE('',#12248,#12249); +#12248 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12249 = VECTOR('',#12250,1.); +#12250 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12251 = ORIENTED_EDGE('',*,*,#12206,.T.); +#12252 = ORIENTED_EDGE('',*,*,#12038,.T.); +#12253 = ORIENTED_EDGE('',*,*,#12254,.F.); +#12254 = EDGE_CURVE('',#12255,#12039,#12257,.T.); +#12255 = VERTEX_POINT('',#12256); +#12256 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12257 = LINE('',#12258,#12259); +#12258 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12259 = VECTOR('',#12260,1.); +#12260 = DIRECTION('',(0.,0.,1.)); +#12261 = ORIENTED_EDGE('',*,*,#12262,.F.); +#12262 = EDGE_CURVE('',#12263,#12255,#12265,.T.); +#12263 = VERTEX_POINT('',#12264); +#12264 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#12265 = LINE('',#12266,#12267); +#12266 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12267 = VECTOR('',#12268,1.); +#12268 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12269 = ORIENTED_EDGE('',*,*,#12270,.F.); +#12270 = EDGE_CURVE('',#12271,#12263,#12273,.T.); +#12271 = VERTEX_POINT('',#12272); +#12272 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#12273 = LINE('',#12274,#12275); +#12274 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#12275 = VECTOR('',#12276,1.); +#12276 = DIRECTION('',(-0.,0.,-1.)); +#12277 = ORIENTED_EDGE('',*,*,#12278,.T.); +#12278 = EDGE_CURVE('',#12271,#12279,#12281,.T.); +#12279 = VERTEX_POINT('',#12280); +#12280 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#12281 = LINE('',#12282,#12283); +#12282 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#12283 = VECTOR('',#12284,1.); +#12284 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12285 = ORIENTED_EDGE('',*,*,#12286,.T.); +#12286 = EDGE_CURVE('',#12279,#12287,#12289,.T.); +#12287 = VERTEX_POINT('',#12288); +#12288 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#12289 = LINE('',#12290,#12291); +#12290 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#12291 = VECTOR('',#12292,1.); +#12292 = DIRECTION('',(-0.,0.,-1.)); +#12293 = ORIENTED_EDGE('',*,*,#12294,.F.); +#12294 = EDGE_CURVE('',#12295,#12287,#12297,.T.); +#12295 = VERTEX_POINT('',#12296); +#12296 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#12297 = LINE('',#12298,#12299); +#12298 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12299 = VECTOR('',#12300,1.); +#12300 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12301 = ORIENTED_EDGE('',*,*,#12302,.F.); +#12302 = EDGE_CURVE('',#12303,#12295,#12305,.T.); +#12303 = VERTEX_POINT('',#12304); +#12304 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#12305 = LINE('',#12306,#12307); +#12306 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#12307 = VECTOR('',#12308,1.); +#12308 = DIRECTION('',(-0.,0.,-1.)); +#12309 = ORIENTED_EDGE('',*,*,#12310,.T.); +#12310 = EDGE_CURVE('',#12303,#12311,#12313,.T.); +#12311 = VERTEX_POINT('',#12312); +#12312 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#12313 = LINE('',#12314,#12315); +#12314 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#12315 = VECTOR('',#12316,1.); +#12316 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12317 = ORIENTED_EDGE('',*,*,#12318,.T.); +#12318 = EDGE_CURVE('',#12311,#12245,#12319,.T.); +#12319 = LINE('',#12320,#12321); +#12320 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#12321 = VECTOR('',#12322,1.); +#12322 = DIRECTION('',(-0.,0.,-1.)); +#12323 = PLANE('',#12324); +#12324 = AXIS2_PLACEMENT_3D('',#12325,#12326,#12327); +#12325 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#12326 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12327 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12328 = ADVANCED_FACE('',(#12329),#12347,.F.); +#12329 = FACE_BOUND('',#12330,.T.); +#12330 = EDGE_LOOP('',(#12331,#12332,#12333,#12341)); +#12331 = ORIENTED_EDGE('',*,*,#12222,.F.); +#12332 = ORIENTED_EDGE('',*,*,#12062,.T.); +#12333 = ORIENTED_EDGE('',*,*,#12334,.T.); +#12334 = EDGE_CURVE('',#12055,#12335,#12337,.T.); +#12335 = VERTEX_POINT('',#12336); +#12336 = CARTESIAN_POINT('',(4.1,0.5,6.8)); +#12337 = LINE('',#12338,#12339); +#12338 = CARTESIAN_POINT('',(3.575,0.5,6.275)); +#12339 = VECTOR('',#12340,1.); +#12340 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#12341 = ORIENTED_EDGE('',*,*,#12342,.F.); +#12342 = EDGE_CURVE('',#12223,#12335,#12343,.T.); +#12343 = LINE('',#12344,#12345); +#12344 = CARTESIAN_POINT('',(4.1,-2.65,6.8)); +#12345 = VECTOR('',#12346,1.); +#12346 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12347 = PLANE('',#12348); +#12348 = AXIS2_PLACEMENT_3D('',#12349,#12350,#12351); +#12349 = CARTESIAN_POINT('',(4.2,-2.65,6.9)); +#12350 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#12351 = DIRECTION('',(-1.224646799147E-16,-1.,-2.103984282776E-29)); +#12352 = ADVANCED_FACE('',(#12353),#12412,.F.); +#12353 = FACE_BOUND('',#12354,.F.); +#12354 = EDGE_LOOP('',(#12355,#12363,#12364,#12365,#12373,#12381,#12390, + #12398,#12406)); +#12355 = ORIENTED_EDGE('',*,*,#12356,.F.); +#12356 = EDGE_CURVE('',#12255,#12357,#12359,.T.); +#12357 = VERTEX_POINT('',#12358); +#12358 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12359 = LINE('',#12360,#12361); +#12360 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12361 = VECTOR('',#12362,1.); +#12362 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12363 = ORIENTED_EDGE('',*,*,#12254,.T.); +#12364 = ORIENTED_EDGE('',*,*,#12046,.T.); +#12365 = ORIENTED_EDGE('',*,*,#12366,.F.); +#12366 = EDGE_CURVE('',#12367,#12047,#12369,.T.); +#12367 = VERTEX_POINT('',#12368); +#12368 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12369 = LINE('',#12370,#12371); +#12370 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12371 = VECTOR('',#12372,1.); +#12372 = DIRECTION('',(0.,0.,1.)); +#12373 = ORIENTED_EDGE('',*,*,#12374,.F.); +#12374 = EDGE_CURVE('',#12375,#12367,#12377,.T.); +#12375 = VERTEX_POINT('',#12376); +#12376 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12377 = LINE('',#12378,#12379); +#12378 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12379 = VECTOR('',#12380,1.); +#12380 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12381 = ORIENTED_EDGE('',*,*,#12382,.F.); +#12382 = EDGE_CURVE('',#12383,#12375,#12385,.T.); +#12383 = VERTEX_POINT('',#12384); +#12384 = CARTESIAN_POINT('',(4.95,1.5,4.15)); +#12385 = CIRCLE('',#12386,0.5); +#12386 = AXIS2_PLACEMENT_3D('',#12387,#12388,#12389); +#12387 = CARTESIAN_POINT('',(4.95,1.,4.15)); +#12388 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12389 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12390 = ORIENTED_EDGE('',*,*,#12391,.F.); +#12391 = EDGE_CURVE('',#12392,#12383,#12394,.T.); +#12392 = VERTEX_POINT('',#12393); +#12393 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12394 = LINE('',#12395,#12396); +#12395 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12396 = VECTOR('',#12397,1.); +#12397 = DIRECTION('',(-0.,0.,-1.)); +#12398 = ORIENTED_EDGE('',*,*,#12399,.T.); +#12399 = EDGE_CURVE('',#12392,#12400,#12402,.T.); +#12400 = VERTEX_POINT('',#12401); +#12401 = CARTESIAN_POINT('',(4.95,2.35,7.)); +#12402 = LINE('',#12403,#12404); +#12403 = CARTESIAN_POINT('',(4.95,-3.4,7.)); +#12404 = VECTOR('',#12405,1.); +#12405 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12406 = ORIENTED_EDGE('',*,*,#12407,.F.); +#12407 = EDGE_CURVE('',#12357,#12400,#12408,.T.); +#12408 = LINE('',#12409,#12410); +#12409 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12410 = VECTOR('',#12411,1.); +#12411 = DIRECTION('',(0.,0.,1.)); +#12412 = PLANE('',#12413); +#12413 = AXIS2_PLACEMENT_3D('',#12414,#12415,#12416); +#12414 = CARTESIAN_POINT('',(4.95,-3.4,0.)); +#12415 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12416 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12417 = ADVANCED_FACE('',(#12418),#12437,.T.); +#12418 = FACE_BOUND('',#12419,.T.); +#12419 = EDGE_LOOP('',(#12420,#12421,#12422,#12430,#12436)); +#12420 = ORIENTED_EDGE('',*,*,#12054,.F.); +#12421 = ORIENTED_EDGE('',*,*,#12366,.F.); +#12422 = ORIENTED_EDGE('',*,*,#12423,.T.); +#12423 = EDGE_CURVE('',#12367,#12424,#12426,.T.); +#12424 = VERTEX_POINT('',#12425); +#12425 = CARTESIAN_POINT('',(4.1,0.5,3.65)); +#12426 = LINE('',#12427,#12428); +#12427 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12428 = VECTOR('',#12429,1.); +#12429 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12430 = ORIENTED_EDGE('',*,*,#12431,.T.); +#12431 = EDGE_CURVE('',#12424,#12335,#12432,.T.); +#12432 = LINE('',#12433,#12434); +#12433 = CARTESIAN_POINT('',(4.1,0.5,5.325)); +#12434 = VECTOR('',#12435,1.); +#12435 = DIRECTION('',(0.,0.,1.)); +#12436 = ORIENTED_EDGE('',*,*,#12334,.F.); +#12437 = PLANE('',#12438); +#12438 = AXIS2_PLACEMENT_3D('',#12439,#12440,#12441); +#12439 = CARTESIAN_POINT('',(4.95,0.5,3.65)); +#12440 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12441 = DIRECTION('',(0.,-0.,1.)); +#12442 = ADVANCED_FACE('',(#12443),#12486,.F.); +#12443 = FACE_BOUND('',#12444,.F.); +#12444 = EDGE_LOOP('',(#12445,#12446,#12454,#12463,#12471,#12479,#12485) + ); +#12445 = ORIENTED_EDGE('',*,*,#12092,.T.); +#12446 = ORIENTED_EDGE('',*,*,#12447,.T.); +#12447 = EDGE_CURVE('',#12095,#12448,#12450,.T.); +#12448 = VERTEX_POINT('',#12449); +#12449 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#12450 = LINE('',#12451,#12452); +#12451 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#12452 = VECTOR('',#12453,1.); +#12453 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12454 = ORIENTED_EDGE('',*,*,#12455,.T.); +#12455 = EDGE_CURVE('',#12448,#12456,#12458,.T.); +#12456 = VERTEX_POINT('',#12457); +#12457 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#12458 = CIRCLE('',#12459,0.5); +#12459 = AXIS2_PLACEMENT_3D('',#12460,#12461,#12462); +#12460 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#12461 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12462 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12463 = ORIENTED_EDGE('',*,*,#12464,.T.); +#12464 = EDGE_CURVE('',#12456,#12465,#12467,.T.); +#12465 = VERTEX_POINT('',#12466); +#12466 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#12467 = LINE('',#12468,#12469); +#12468 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#12469 = VECTOR('',#12470,1.); +#12470 = DIRECTION('',(0.,0.,-1.)); +#12471 = ORIENTED_EDGE('',*,*,#12472,.T.); +#12472 = EDGE_CURVE('',#12465,#12473,#12475,.T.); +#12473 = VERTEX_POINT('',#12474); +#12474 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#12475 = LINE('',#12476,#12477); +#12476 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#12477 = VECTOR('',#12478,1.); +#12478 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12479 = ORIENTED_EDGE('',*,*,#12480,.F.); +#12480 = EDGE_CURVE('',#12134,#12473,#12481,.T.); +#12481 = LINE('',#12482,#12483); +#12482 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#12483 = VECTOR('',#12484,1.); +#12484 = DIRECTION('',(0.,0.,-1.)); +#12485 = ORIENTED_EDGE('',*,*,#12141,.F.); +#12486 = PLANE('',#12487); +#12487 = AXIS2_PLACEMENT_3D('',#12488,#12489,#12490); +#12488 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#12489 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12490 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12491 = ADVANCED_FACE('',(#12492),#12503,.T.); +#12492 = FACE_BOUND('',#12493,.T.); +#12493 = EDGE_LOOP('',(#12494,#12495,#12501,#12502)); +#12494 = ORIENTED_EDGE('',*,*,#12447,.T.); +#12495 = ORIENTED_EDGE('',*,*,#12496,.T.); +#12496 = EDGE_CURVE('',#12448,#12190,#12497,.T.); +#12497 = LINE('',#12498,#12499); +#12498 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12499 = VECTOR('',#12500,1.); +#12500 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12501 = ORIENTED_EDGE('',*,*,#12198,.T.); +#12502 = ORIENTED_EDGE('',*,*,#12102,.F.); +#12503 = PLANE('',#12504); +#12504 = AXIS2_PLACEMENT_3D('',#12505,#12506,#12507); +#12505 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#12506 = DIRECTION('',(0.,0.,1.)); +#12507 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12508 = ADVANCED_FACE('',(#12509),#12527,.F.); +#12509 = FACE_BOUND('',#12510,.F.); +#12510 = EDGE_LOOP('',(#12511,#12512,#12520,#12526)); +#12511 = ORIENTED_EDGE('',*,*,#12244,.T.); +#12512 = ORIENTED_EDGE('',*,*,#12513,.T.); +#12513 = EDGE_CURVE('',#12245,#12514,#12516,.T.); +#12514 = VERTEX_POINT('',#12515); +#12515 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#12516 = LINE('',#12517,#12518); +#12517 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#12518 = VECTOR('',#12519,1.); +#12519 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12520 = ORIENTED_EDGE('',*,*,#12521,.T.); +#12521 = EDGE_CURVE('',#12514,#12156,#12522,.T.); +#12522 = LINE('',#12523,#12524); +#12523 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12524 = VECTOR('',#12525,1.); +#12525 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12526 = ORIENTED_EDGE('',*,*,#12155,.T.); +#12527 = PLANE('',#12528); +#12528 = AXIS2_PLACEMENT_3D('',#12529,#12530,#12531); +#12529 = CARTESIAN_POINT('',(1.25,-0.525,0.)); +#12530 = DIRECTION('',(0.,0.,1.)); +#12531 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12532 = ADVANCED_FACE('',(#12533),#12544,.F.); +#12533 = FACE_BOUND('',#12534,.F.); +#12534 = EDGE_LOOP('',(#12535,#12536,#12537,#12543)); +#12535 = ORIENTED_EDGE('',*,*,#12496,.T.); +#12536 = ORIENTED_EDGE('',*,*,#12189,.T.); +#12537 = ORIENTED_EDGE('',*,*,#12538,.F.); +#12538 = EDGE_CURVE('',#12456,#12182,#12539,.T.); +#12539 = LINE('',#12540,#12541); +#12540 = CARTESIAN_POINT('',(4.95,1.5,4.15)); +#12541 = VECTOR('',#12542,1.); +#12542 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12543 = ORIENTED_EDGE('',*,*,#12455,.F.); +#12544 = CYLINDRICAL_SURFACE('',#12545,0.5); +#12545 = AXIS2_PLACEMENT_3D('',#12546,#12547,#12548); +#12546 = CARTESIAN_POINT('',(4.95,1.,4.15)); +#12547 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#12548 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12549 = ADVANCED_FACE('',(#12550),#12682,.T.); +#12550 = FACE_BOUND('',#12551,.T.); +#12551 = EDGE_LOOP('',(#12552,#12553,#12561,#12569,#12577,#12585,#12593, + #12602,#12610,#12619,#12627,#12635,#12643,#12651,#12657,#12658, + #12659,#12660,#12668,#12676)); +#12552 = ORIENTED_EDGE('',*,*,#12391,.F.); +#12553 = ORIENTED_EDGE('',*,*,#12554,.T.); +#12554 = EDGE_CURVE('',#12392,#12555,#12557,.T.); +#12555 = VERTEX_POINT('',#12556); +#12556 = CARTESIAN_POINT('',(3.,1.5,7.)); +#12557 = LINE('',#12558,#12559); +#12558 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12559 = VECTOR('',#12560,1.); +#12560 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12561 = ORIENTED_EDGE('',*,*,#12562,.T.); +#12562 = EDGE_CURVE('',#12555,#12563,#12565,.T.); +#12563 = VERTEX_POINT('',#12564); +#12564 = CARTESIAN_POINT('',(3.,1.5,6.1)); +#12565 = LINE('',#12566,#12567); +#12566 = CARTESIAN_POINT('',(3.,1.5,5.340388446215)); +#12567 = VECTOR('',#12568,1.); +#12568 = DIRECTION('',(-2.467162276945E-16,8.387236609414E-17,-1.)); +#12569 = ORIENTED_EDGE('',*,*,#12570,.T.); +#12570 = EDGE_CURVE('',#12563,#12571,#12573,.T.); +#12571 = VERTEX_POINT('',#12572); +#12572 = CARTESIAN_POINT('',(2.75,1.5,5.85)); +#12573 = LINE('',#12574,#12575); +#12574 = CARTESIAN_POINT('',(2.057694223108,1.5,5.157694223108)); +#12575 = VECTOR('',#12576,1.); +#12576 = DIRECTION('',(-0.707106781187,1.459023244428E-16, + -0.707106781187)); +#12577 = ORIENTED_EDGE('',*,*,#12578,.T.); +#12578 = EDGE_CURVE('',#12571,#12579,#12581,.T.); +#12579 = VERTEX_POINT('',#12580); +#12580 = CARTESIAN_POINT('',(3.,1.5,5.6)); +#12581 = LINE('',#12582,#12583); +#12582 = CARTESIAN_POINT('',(2.817305776892,1.5,5.782694223108)); +#12583 = VECTOR('',#12584,1.); +#12584 = DIRECTION('',(0.707106781187,-2.72888868042E-17,-0.707106781187 + )); +#12585 = ORIENTED_EDGE('',*,*,#12586,.T.); +#12586 = EDGE_CURVE('',#12579,#12587,#12589,.T.); +#12587 = VERTEX_POINT('',#12588); +#12588 = CARTESIAN_POINT('',(3.,1.5,3.85)); +#12589 = LINE('',#12590,#12591); +#12590 = CARTESIAN_POINT('',(3.,1.5,3.840388446215)); +#12591 = VECTOR('',#12592,1.); +#12592 = DIRECTION('',(1.027140246741E-32,8.387236609414E-17,-1.)); +#12593 = ORIENTED_EDGE('',*,*,#12594,.F.); +#12594 = EDGE_CURVE('',#12595,#12587,#12597,.T.); +#12595 = VERTEX_POINT('',#12596); +#12596 = CARTESIAN_POINT('',(2.25,1.5,3.1)); +#12597 = CIRCLE('',#12598,0.75); +#12598 = AXIS2_PLACEMENT_3D('',#12599,#12600,#12601); +#12599 = CARTESIAN_POINT('',(2.25,1.5,3.85)); +#12600 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12601 = DIRECTION('',(-0.,0.,-1.)); +#12602 = ORIENTED_EDGE('',*,*,#12603,.F.); +#12603 = EDGE_CURVE('',#12604,#12595,#12606,.T.); +#12604 = VERTEX_POINT('',#12605); +#12605 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#12606 = LINE('',#12607,#12608); +#12607 = CARTESIAN_POINT('',(1.25,1.5,3.1)); +#12608 = VECTOR('',#12609,1.); +#12609 = DIRECTION('',(1.,-1.224646799147E-16,6.189508478766E-63)); +#12610 = ORIENTED_EDGE('',*,*,#12611,.F.); +#12611 = EDGE_CURVE('',#12612,#12604,#12614,.T.); +#12612 = VERTEX_POINT('',#12613); +#12613 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#12614 = CIRCLE('',#12615,0.75); +#12615 = AXIS2_PLACEMENT_3D('',#12616,#12617,#12618); +#12616 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#12617 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12618 = DIRECTION('',(-0.,0.,-1.)); +#12619 = ORIENTED_EDGE('',*,*,#12620,.F.); +#12620 = EDGE_CURVE('',#12621,#12612,#12623,.T.); +#12621 = VERTEX_POINT('',#12622); +#12622 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#12623 = LINE('',#12624,#12625); +#12624 = CARTESIAN_POINT('',(-0.5,1.5,3.840388446215)); +#12625 = VECTOR('',#12626,1.); +#12626 = DIRECTION('',(1.027140246741E-32,8.387236609414E-17,-1.)); +#12627 = ORIENTED_EDGE('',*,*,#12628,.F.); +#12628 = EDGE_CURVE('',#12629,#12621,#12631,.T.); +#12629 = VERTEX_POINT('',#12630); +#12630 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#12631 = LINE('',#12632,#12633); +#12632 = CARTESIAN_POINT('',(-0.317305776892,1.5,5.782694223108)); +#12633 = VECTOR('',#12634,1.); +#12634 = DIRECTION('',(-0.707106781187,1.459023244428E-16, + -0.707106781187)); +#12635 = ORIENTED_EDGE('',*,*,#12636,.F.); +#12636 = EDGE_CURVE('',#12637,#12629,#12639,.T.); +#12637 = VERTEX_POINT('',#12638); +#12638 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#12639 = LINE('',#12640,#12641); +#12640 = CARTESIAN_POINT('',(0.442305776892,1.5,5.157694223108)); +#12641 = VECTOR('',#12642,1.); +#12642 = DIRECTION('',(0.707106781187,-2.72888868042E-17,-0.707106781187 + )); +#12643 = ORIENTED_EDGE('',*,*,#12644,.F.); +#12644 = EDGE_CURVE('',#12645,#12637,#12647,.T.); +#12645 = VERTEX_POINT('',#12646); +#12646 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#12647 = LINE('',#12648,#12649); +#12648 = CARTESIAN_POINT('',(-0.5,1.5,5.340388446215)); +#12649 = VECTOR('',#12650,1.); +#12650 = DIRECTION('',(1.027140246741E-32,8.387236609414E-17,-1.)); +#12651 = ORIENTED_EDGE('',*,*,#12652,.T.); +#12652 = EDGE_CURVE('',#12645,#12174,#12653,.T.); +#12653 = LINE('',#12654,#12655); +#12654 = CARTESIAN_POINT('',(4.95,1.5,7.)); +#12655 = VECTOR('',#12656,1.); +#12656 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12657 = ORIENTED_EDGE('',*,*,#12181,.T.); +#12658 = ORIENTED_EDGE('',*,*,#12538,.F.); +#12659 = ORIENTED_EDGE('',*,*,#12464,.T.); +#12660 = ORIENTED_EDGE('',*,*,#12661,.F.); +#12661 = EDGE_CURVE('',#12662,#12465,#12664,.T.); +#12662 = VERTEX_POINT('',#12663); +#12663 = CARTESIAN_POINT('',(4.1,1.5,1.85)); +#12664 = LINE('',#12665,#12666); +#12665 = CARTESIAN_POINT('',(4.1,1.5,1.85)); +#12666 = VECTOR('',#12667,1.); +#12667 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12668 = ORIENTED_EDGE('',*,*,#12669,.F.); +#12669 = EDGE_CURVE('',#12670,#12662,#12672,.T.); +#12670 = VERTEX_POINT('',#12671); +#12671 = CARTESIAN_POINT('',(4.1,1.5,4.15)); +#12672 = LINE('',#12673,#12674); +#12673 = CARTESIAN_POINT('',(4.1,1.5,7.)); +#12674 = VECTOR('',#12675,1.); +#12675 = DIRECTION('',(0.,0.,-1.)); +#12676 = ORIENTED_EDGE('',*,*,#12677,.F.); +#12677 = EDGE_CURVE('',#12383,#12670,#12678,.T.); +#12678 = LINE('',#12679,#12680); +#12679 = CARTESIAN_POINT('',(4.95,1.5,4.15)); +#12680 = VECTOR('',#12681,1.); +#12681 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12682 = PLANE('',#12683); +#12683 = AXIS2_PLACEMENT_3D('',#12684,#12685,#12686); +#12684 = CARTESIAN_POINT('',(1.25,1.5,4.58077689243)); +#12685 = DIRECTION('',(-1.224646799147E-16,-1.,-8.387236609414E-17)); +#12686 = DIRECTION('',(-1.027140246741E-32,-8.387236609414E-17,1.)); +#12687 = ADVANCED_FACE('',(#12688),#12706,.T.); +#12688 = FACE_BOUND('',#12689,.T.); +#12689 = EDGE_LOOP('',(#12690,#12691,#12699,#12705)); +#12690 = ORIENTED_EDGE('',*,*,#12652,.F.); +#12691 = ORIENTED_EDGE('',*,*,#12692,.F.); +#12692 = EDGE_CURVE('',#12693,#12645,#12695,.T.); +#12693 = VERTEX_POINT('',#12694); +#12694 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#12695 = LINE('',#12696,#12697); +#12696 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#12697 = VECTOR('',#12698,1.); +#12698 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12699 = ORIENTED_EDGE('',*,*,#12700,.T.); +#12700 = EDGE_CURVE('',#12693,#12166,#12701,.T.); +#12701 = LINE('',#12702,#12703); +#12702 = CARTESIAN_POINT('',(4.95,2.35,7.)); +#12703 = VECTOR('',#12704,1.); +#12704 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12705 = ORIENTED_EDGE('',*,*,#12173,.T.); +#12706 = PLANE('',#12707); +#12707 = AXIS2_PLACEMENT_3D('',#12708,#12709,#12710); +#12708 = CARTESIAN_POINT('',(1.25,-0.525,7.)); +#12709 = DIRECTION('',(0.,0.,1.)); +#12710 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12711 = ADVANCED_FACE('',(#12712),#12876,.F.); +#12712 = FACE_BOUND('',#12713,.F.); +#12713 = EDGE_LOOP('',(#12714,#12722,#12723,#12731,#12739,#12747,#12755, + #12763,#12772,#12780,#12789,#12797,#12805,#12813,#12819,#12820, + #12821,#12822,#12830,#12838,#12846,#12854,#12862,#12870)); +#12714 = ORIENTED_EDGE('',*,*,#12715,.F.); +#12715 = EDGE_CURVE('',#12357,#12716,#12718,.T.); +#12716 = VERTEX_POINT('',#12717); +#12717 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#12718 = LINE('',#12719,#12720); +#12719 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12720 = VECTOR('',#12721,1.); +#12721 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12722 = ORIENTED_EDGE('',*,*,#12407,.T.); +#12723 = ORIENTED_EDGE('',*,*,#12724,.T.); +#12724 = EDGE_CURVE('',#12400,#12725,#12727,.T.); +#12725 = VERTEX_POINT('',#12726); +#12726 = CARTESIAN_POINT('',(3.,2.35,7.)); +#12727 = LINE('',#12728,#12729); +#12728 = CARTESIAN_POINT('',(4.95,2.35,7.)); +#12729 = VECTOR('',#12730,1.); +#12730 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12731 = ORIENTED_EDGE('',*,*,#12732,.F.); +#12732 = EDGE_CURVE('',#12733,#12725,#12735,.T.); +#12733 = VERTEX_POINT('',#12734); +#12734 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#12735 = LINE('',#12736,#12737); +#12736 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#12737 = VECTOR('',#12738,1.); +#12738 = DIRECTION('',(2.467162276945E-16,-3.021402385438E-32,1.)); +#12739 = ORIENTED_EDGE('',*,*,#12740,.F.); +#12740 = EDGE_CURVE('',#12741,#12733,#12743,.T.); +#12741 = VERTEX_POINT('',#12742); +#12742 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#12743 = LINE('',#12744,#12745); +#12744 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#12745 = VECTOR('',#12746,1.); +#12746 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#12747 = ORIENTED_EDGE('',*,*,#12748,.F.); +#12748 = EDGE_CURVE('',#12749,#12741,#12751,.T.); +#12749 = VERTEX_POINT('',#12750); +#12750 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#12751 = LINE('',#12752,#12753); +#12752 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#12753 = VECTOR('',#12754,1.); +#12754 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#12755 = ORIENTED_EDGE('',*,*,#12756,.F.); +#12756 = EDGE_CURVE('',#12757,#12749,#12759,.T.); +#12757 = VERTEX_POINT('',#12758); +#12758 = CARTESIAN_POINT('',(3.,2.35,3.85)); +#12759 = LINE('',#12760,#12761); +#12760 = CARTESIAN_POINT('',(3.,2.35,3.1)); +#12761 = VECTOR('',#12762,1.); +#12762 = DIRECTION('',(0.,0.,1.)); +#12763 = ORIENTED_EDGE('',*,*,#12764,.F.); +#12764 = EDGE_CURVE('',#12765,#12757,#12767,.T.); +#12765 = VERTEX_POINT('',#12766); +#12766 = CARTESIAN_POINT('',(2.25,2.35,3.1)); +#12767 = CIRCLE('',#12768,0.75); +#12768 = AXIS2_PLACEMENT_3D('',#12769,#12770,#12771); +#12769 = CARTESIAN_POINT('',(2.25,2.35,3.85)); +#12770 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12771 = DIRECTION('',(0.,0.,1.)); +#12772 = ORIENTED_EDGE('',*,*,#12773,.F.); +#12773 = EDGE_CURVE('',#12774,#12765,#12776,.T.); +#12774 = VERTEX_POINT('',#12775); +#12775 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#12776 = LINE('',#12777,#12778); +#12777 = CARTESIAN_POINT('',(1.25,2.35,3.1)); +#12778 = VECTOR('',#12779,1.); +#12779 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12780 = ORIENTED_EDGE('',*,*,#12781,.T.); +#12781 = EDGE_CURVE('',#12774,#12782,#12784,.T.); +#12782 = VERTEX_POINT('',#12783); +#12783 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#12784 = CIRCLE('',#12785,0.75); +#12785 = AXIS2_PLACEMENT_3D('',#12786,#12787,#12788); +#12786 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#12787 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#12788 = DIRECTION('',(0.,0.,1.)); +#12789 = ORIENTED_EDGE('',*,*,#12790,.T.); +#12790 = EDGE_CURVE('',#12782,#12791,#12793,.T.); +#12791 = VERTEX_POINT('',#12792); +#12792 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#12793 = LINE('',#12794,#12795); +#12794 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#12795 = VECTOR('',#12796,1.); +#12796 = DIRECTION('',(0.,0.,1.)); +#12797 = ORIENTED_EDGE('',*,*,#12798,.T.); +#12798 = EDGE_CURVE('',#12791,#12799,#12801,.T.); +#12799 = VERTEX_POINT('',#12800); +#12800 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#12801 = LINE('',#12802,#12803); +#12802 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#12803 = VECTOR('',#12804,1.); +#12804 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#12805 = ORIENTED_EDGE('',*,*,#12806,.T.); +#12806 = EDGE_CURVE('',#12799,#12807,#12809,.T.); +#12807 = VERTEX_POINT('',#12808); +#12808 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#12809 = LINE('',#12810,#12811); +#12810 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#12811 = VECTOR('',#12812,1.); +#12812 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#12813 = ORIENTED_EDGE('',*,*,#12814,.T.); +#12814 = EDGE_CURVE('',#12807,#12693,#12815,.T.); +#12815 = LINE('',#12816,#12817); +#12816 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#12817 = VECTOR('',#12818,1.); +#12818 = DIRECTION('',(0.,0.,1.)); +#12819 = ORIENTED_EDGE('',*,*,#12700,.T.); +#12820 = ORIENTED_EDGE('',*,*,#12165,.F.); +#12821 = ORIENTED_EDGE('',*,*,#12521,.F.); +#12822 = ORIENTED_EDGE('',*,*,#12823,.T.); +#12823 = EDGE_CURVE('',#12514,#12824,#12826,.T.); +#12824 = VERTEX_POINT('',#12825); +#12825 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#12826 = LINE('',#12827,#12828); +#12827 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#12828 = VECTOR('',#12829,1.); +#12829 = DIRECTION('',(0.,0.,1.)); +#12830 = ORIENTED_EDGE('',*,*,#12831,.F.); +#12831 = EDGE_CURVE('',#12832,#12824,#12834,.T.); +#12832 = VERTEX_POINT('',#12833); +#12833 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12834 = LINE('',#12835,#12836); +#12835 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12836 = VECTOR('',#12837,1.); +#12837 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12838 = ORIENTED_EDGE('',*,*,#12839,.F.); +#12839 = EDGE_CURVE('',#12840,#12832,#12842,.T.); +#12840 = VERTEX_POINT('',#12841); +#12841 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#12842 = LINE('',#12843,#12844); +#12843 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#12844 = VECTOR('',#12845,1.); +#12845 = DIRECTION('',(0.,0.,1.)); +#12846 = ORIENTED_EDGE('',*,*,#12847,.F.); +#12847 = EDGE_CURVE('',#12848,#12840,#12850,.T.); +#12848 = VERTEX_POINT('',#12849); +#12849 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#12850 = LINE('',#12851,#12852); +#12851 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12852 = VECTOR('',#12853,1.); +#12853 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12854 = ORIENTED_EDGE('',*,*,#12855,.T.); +#12855 = EDGE_CURVE('',#12848,#12856,#12858,.T.); +#12856 = VERTEX_POINT('',#12857); +#12857 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#12858 = LINE('',#12859,#12860); +#12859 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#12860 = VECTOR('',#12861,1.); +#12861 = DIRECTION('',(0.,0.,1.)); +#12862 = ORIENTED_EDGE('',*,*,#12863,.F.); +#12863 = EDGE_CURVE('',#12864,#12856,#12866,.T.); +#12864 = VERTEX_POINT('',#12865); +#12865 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12866 = LINE('',#12867,#12868); +#12867 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12868 = VECTOR('',#12869,1.); +#12869 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12870 = ORIENTED_EDGE('',*,*,#12871,.F.); +#12871 = EDGE_CURVE('',#12716,#12864,#12872,.T.); +#12872 = LINE('',#12873,#12874); +#12873 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#12874 = VECTOR('',#12875,1.); +#12875 = DIRECTION('',(0.,0.,1.)); +#12876 = PLANE('',#12877); +#12877 = AXIS2_PLACEMENT_3D('',#12878,#12879,#12880); +#12878 = CARTESIAN_POINT('',(4.95,2.35,0.)); +#12879 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12880 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12881 = ADVANCED_FACE('',(#12882),#12900,.F.); +#12882 = FACE_BOUND('',#12883,.F.); +#12883 = EDGE_LOOP('',(#12884,#12885,#12893,#12899)); +#12884 = ORIENTED_EDGE('',*,*,#12480,.T.); +#12885 = ORIENTED_EDGE('',*,*,#12886,.T.); +#12886 = EDGE_CURVE('',#12473,#12887,#12889,.T.); +#12887 = VERTEX_POINT('',#12888); +#12888 = CARTESIAN_POINT('',(4.1,-2.65,1.85)); +#12889 = LINE('',#12890,#12891); +#12890 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#12891 = VECTOR('',#12892,1.); +#12892 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12893 = ORIENTED_EDGE('',*,*,#12894,.F.); +#12894 = EDGE_CURVE('',#12223,#12887,#12895,.T.); +#12895 = LINE('',#12896,#12897); +#12896 = CARTESIAN_POINT('',(4.1,-2.65,7.)); +#12897 = VECTOR('',#12898,1.); +#12898 = DIRECTION('',(0.,0.,-1.)); +#12899 = ORIENTED_EDGE('',*,*,#12230,.F.); +#12900 = PLANE('',#12901); +#12901 = AXIS2_PLACEMENT_3D('',#12902,#12903,#12904); +#12902 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#12903 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12904 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12905 = ADVANCED_FACE('',(#12906),#12933,.T.); +#12906 = FACE_BOUND('',#12907,.T.); +#12907 = EDGE_LOOP('',(#12908,#12909,#12917,#12925,#12931,#12932)); +#12908 = ORIENTED_EDGE('',*,*,#12823,.T.); +#12909 = ORIENTED_EDGE('',*,*,#12910,.T.); +#12910 = EDGE_CURVE('',#12824,#12911,#12913,.T.); +#12911 = VERTEX_POINT('',#12912); +#12912 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#12913 = LINE('',#12914,#12915); +#12914 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#12915 = VECTOR('',#12916,1.); +#12916 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12917 = ORIENTED_EDGE('',*,*,#12918,.T.); +#12918 = EDGE_CURVE('',#12911,#12919,#12921,.T.); +#12919 = VERTEX_POINT('',#12920); +#12920 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#12921 = LINE('',#12922,#12923); +#12922 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#12923 = VECTOR('',#12924,1.); +#12924 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12925 = ORIENTED_EDGE('',*,*,#12926,.T.); +#12926 = EDGE_CURVE('',#12919,#12311,#12927,.T.); +#12927 = LINE('',#12928,#12929); +#12928 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#12929 = VECTOR('',#12930,1.); +#12930 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12931 = ORIENTED_EDGE('',*,*,#12318,.T.); +#12932 = ORIENTED_EDGE('',*,*,#12513,.T.); +#12933 = PLANE('',#12934); +#12934 = AXIS2_PLACEMENT_3D('',#12935,#12936,#12937); +#12935 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#12936 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12937 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12938 = ADVANCED_FACE('',(#12939),#12957,.F.); +#12939 = FACE_BOUND('',#12940,.F.); +#12940 = EDGE_LOOP('',(#12941,#12949,#12950,#12951)); +#12941 = ORIENTED_EDGE('',*,*,#12942,.T.); +#12942 = EDGE_CURVE('',#12943,#12919,#12945,.T.); +#12943 = VERTEX_POINT('',#12944); +#12944 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12945 = LINE('',#12946,#12947); +#12946 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12947 = VECTOR('',#12948,1.); +#12948 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12949 = ORIENTED_EDGE('',*,*,#12926,.T.); +#12950 = ORIENTED_EDGE('',*,*,#12310,.F.); +#12951 = ORIENTED_EDGE('',*,*,#12952,.F.); +#12952 = EDGE_CURVE('',#12943,#12303,#12953,.T.); +#12953 = LINE('',#12954,#12955); +#12954 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12955 = VECTOR('',#12956,1.); +#12956 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12957 = PLANE('',#12958); +#12958 = AXIS2_PLACEMENT_3D('',#12959,#12960,#12961); +#12959 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12960 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#12961 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12962 = ADVANCED_FACE('',(#12963),#12988,.F.); +#12963 = FACE_BOUND('',#12964,.F.); +#12964 = EDGE_LOOP('',(#12965,#12966,#12974,#12980,#12981,#12982)); +#12965 = ORIENTED_EDGE('',*,*,#12839,.T.); +#12966 = ORIENTED_EDGE('',*,*,#12967,.T.); +#12967 = EDGE_CURVE('',#12832,#12968,#12970,.T.); +#12968 = VERTEX_POINT('',#12969); +#12969 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#12970 = LINE('',#12971,#12972); +#12971 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12972 = VECTOR('',#12973,1.); +#12973 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12974 = ORIENTED_EDGE('',*,*,#12975,.T.); +#12975 = EDGE_CURVE('',#12968,#12943,#12976,.T.); +#12976 = LINE('',#12977,#12978); +#12977 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#12978 = VECTOR('',#12979,1.); +#12979 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12980 = ORIENTED_EDGE('',*,*,#12952,.T.); +#12981 = ORIENTED_EDGE('',*,*,#12302,.T.); +#12982 = ORIENTED_EDGE('',*,*,#12983,.T.); +#12983 = EDGE_CURVE('',#12295,#12840,#12984,.T.); +#12984 = LINE('',#12985,#12986); +#12985 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#12986 = VECTOR('',#12987,1.); +#12987 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12988 = PLANE('',#12989); +#12989 = AXIS2_PLACEMENT_3D('',#12990,#12991,#12992); +#12990 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#12991 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12992 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12993 = ADVANCED_FACE('',(#12994),#13005,.F.); +#12994 = FACE_BOUND('',#12995,.F.); +#12995 = EDGE_LOOP('',(#12996,#12997,#13003,#13004)); +#12996 = ORIENTED_EDGE('',*,*,#12294,.T.); +#12997 = ORIENTED_EDGE('',*,*,#12998,.T.); +#12998 = EDGE_CURVE('',#12287,#12848,#12999,.T.); +#12999 = LINE('',#13000,#13001); +#13000 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#13001 = VECTOR('',#13002,1.); +#13002 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13003 = ORIENTED_EDGE('',*,*,#12847,.T.); +#13004 = ORIENTED_EDGE('',*,*,#12983,.F.); +#13005 = PLANE('',#13006); +#13006 = AXIS2_PLACEMENT_3D('',#13007,#13008,#13009); +#13007 = CARTESIAN_POINT('',(1.25,-0.525,0.)); +#13008 = DIRECTION('',(0.,0.,1.)); +#13009 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13010 = ADVANCED_FACE('',(#13011),#13038,.T.); +#13011 = FACE_BOUND('',#13012,.T.); +#13012 = EDGE_LOOP('',(#13013,#13014,#13022,#13030,#13036,#13037)); +#13013 = ORIENTED_EDGE('',*,*,#12855,.T.); +#13014 = ORIENTED_EDGE('',*,*,#13015,.T.); +#13015 = EDGE_CURVE('',#12856,#13016,#13018,.T.); +#13016 = VERTEX_POINT('',#13017); +#13017 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#13018 = LINE('',#13019,#13020); +#13019 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#13020 = VECTOR('',#13021,1.); +#13021 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13022 = ORIENTED_EDGE('',*,*,#13023,.T.); +#13023 = EDGE_CURVE('',#13016,#13024,#13026,.T.); +#13024 = VERTEX_POINT('',#13025); +#13025 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#13026 = LINE('',#13027,#13028); +#13027 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#13028 = VECTOR('',#13029,1.); +#13029 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13030 = ORIENTED_EDGE('',*,*,#13031,.T.); +#13031 = EDGE_CURVE('',#13024,#12279,#13032,.T.); +#13032 = LINE('',#13033,#13034); +#13033 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#13034 = VECTOR('',#13035,1.); +#13035 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#13036 = ORIENTED_EDGE('',*,*,#12286,.T.); +#13037 = ORIENTED_EDGE('',*,*,#12998,.T.); +#13038 = PLANE('',#13039); +#13039 = AXIS2_PLACEMENT_3D('',#13040,#13041,#13042); +#13040 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#13041 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#13042 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#13043 = ADVANCED_FACE('',(#13044),#13062,.F.); +#13044 = FACE_BOUND('',#13045,.F.); +#13045 = EDGE_LOOP('',(#13046,#13054,#13055,#13056)); +#13046 = ORIENTED_EDGE('',*,*,#13047,.T.); +#13047 = EDGE_CURVE('',#13048,#13024,#13050,.T.); +#13048 = VERTEX_POINT('',#13049); +#13049 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13050 = LINE('',#13051,#13052); +#13051 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13052 = VECTOR('',#13053,1.); +#13053 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13054 = ORIENTED_EDGE('',*,*,#13031,.T.); +#13055 = ORIENTED_EDGE('',*,*,#12278,.F.); +#13056 = ORIENTED_EDGE('',*,*,#13057,.F.); +#13057 = EDGE_CURVE('',#13048,#12271,#13058,.T.); +#13058 = LINE('',#13059,#13060); +#13059 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13060 = VECTOR('',#13061,1.); +#13061 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#13062 = PLANE('',#13063); +#13063 = AXIS2_PLACEMENT_3D('',#13064,#13065,#13066); +#13064 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#13065 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#13066 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#13067 = ADVANCED_FACE('',(#13068),#13093,.F.); +#13068 = FACE_BOUND('',#13069,.F.); +#13069 = EDGE_LOOP('',(#13070,#13071,#13079,#13085,#13086,#13087)); +#13070 = ORIENTED_EDGE('',*,*,#12871,.T.); +#13071 = ORIENTED_EDGE('',*,*,#13072,.T.); +#13072 = EDGE_CURVE('',#12864,#13073,#13075,.T.); +#13073 = VERTEX_POINT('',#13074); +#13074 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13075 = LINE('',#13076,#13077); +#13076 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#13077 = VECTOR('',#13078,1.); +#13078 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13079 = ORIENTED_EDGE('',*,*,#13080,.T.); +#13080 = EDGE_CURVE('',#13073,#13048,#13081,.T.); +#13081 = LINE('',#13082,#13083); +#13082 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13083 = VECTOR('',#13084,1.); +#13084 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13085 = ORIENTED_EDGE('',*,*,#13057,.T.); +#13086 = ORIENTED_EDGE('',*,*,#12270,.T.); +#13087 = ORIENTED_EDGE('',*,*,#13088,.T.); +#13088 = EDGE_CURVE('',#12263,#12716,#13089,.T.); +#13089 = LINE('',#13090,#13091); +#13090 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#13091 = VECTOR('',#13092,1.); +#13092 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13093 = PLANE('',#13094); +#13094 = AXIS2_PLACEMENT_3D('',#13095,#13096,#13097); +#13095 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#13096 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#13097 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#13098 = ADVANCED_FACE('',(#13099),#13105,.F.); +#13099 = FACE_BOUND('',#13100,.F.); +#13100 = EDGE_LOOP('',(#13101,#13102,#13103,#13104)); +#13101 = ORIENTED_EDGE('',*,*,#12356,.T.); +#13102 = ORIENTED_EDGE('',*,*,#12715,.T.); +#13103 = ORIENTED_EDGE('',*,*,#13088,.F.); +#13104 = ORIENTED_EDGE('',*,*,#12262,.T.); +#13105 = PLANE('',#13106); +#13106 = AXIS2_PLACEMENT_3D('',#13107,#13108,#13109); +#13107 = CARTESIAN_POINT('',(1.25,-0.525,0.)); +#13108 = DIRECTION('',(0.,0.,1.)); +#13109 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13110 = ADVANCED_FACE('',(#13111),#13138,.F.); +#13111 = FACE_BOUND('',#13112,.F.); +#13112 = EDGE_LOOP('',(#13113,#13114,#13115,#13116,#13122,#13123,#13132) + ); +#13113 = ORIENTED_EDGE('',*,*,#12431,.T.); +#13114 = ORIENTED_EDGE('',*,*,#12342,.F.); +#13115 = ORIENTED_EDGE('',*,*,#12894,.T.); +#13116 = ORIENTED_EDGE('',*,*,#13117,.T.); +#13117 = EDGE_CURVE('',#12887,#12662,#13118,.T.); +#13118 = LINE('',#13119,#13120); +#13119 = CARTESIAN_POINT('',(4.1,-2.65,1.85)); +#13120 = VECTOR('',#13121,1.); +#13121 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13122 = ORIENTED_EDGE('',*,*,#12669,.F.); +#13123 = ORIENTED_EDGE('',*,*,#13124,.F.); +#13124 = EDGE_CURVE('',#13125,#12670,#13127,.T.); +#13125 = VERTEX_POINT('',#13126); +#13126 = CARTESIAN_POINT('',(4.1,1.,3.65)); +#13127 = CIRCLE('',#13128,0.5); +#13128 = AXIS2_PLACEMENT_3D('',#13129,#13130,#13131); +#13129 = CARTESIAN_POINT('',(4.1,1.,4.15)); +#13130 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13131 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13132 = ORIENTED_EDGE('',*,*,#13133,.T.); +#13133 = EDGE_CURVE('',#13125,#12424,#13134,.T.); +#13134 = LINE('',#13135,#13136); +#13135 = CARTESIAN_POINT('',(4.1,-0.825,3.65)); +#13136 = VECTOR('',#13137,1.); +#13137 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13138 = PLANE('',#13139); +#13139 = AXIS2_PLACEMENT_3D('',#13140,#13141,#13142); +#13140 = CARTESIAN_POINT('',(4.1,-2.65,7.)); +#13141 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13142 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13143 = ADVANCED_FACE('',(#13144),#13155,.T.); +#13144 = FACE_BOUND('',#13145,.T.); +#13145 = EDGE_LOOP('',(#13146,#13147,#13148,#13149)); +#13146 = ORIENTED_EDGE('',*,*,#12554,.F.); +#13147 = ORIENTED_EDGE('',*,*,#12399,.T.); +#13148 = ORIENTED_EDGE('',*,*,#12724,.T.); +#13149 = ORIENTED_EDGE('',*,*,#13150,.T.); +#13150 = EDGE_CURVE('',#12725,#12555,#13151,.T.); +#13151 = LINE('',#13152,#13153); +#13152 = CARTESIAN_POINT('',(3.,2.35,7.)); +#13153 = VECTOR('',#13154,1.); +#13154 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13155 = PLANE('',#13156); +#13156 = AXIS2_PLACEMENT_3D('',#13157,#13158,#13159); +#13157 = CARTESIAN_POINT('',(1.25,-0.525,7.)); +#13158 = DIRECTION('',(0.,0.,1.)); +#13159 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13160 = ADVANCED_FACE('',(#13161),#13172,.F.); +#13161 = FACE_BOUND('',#13162,.F.); +#13162 = EDGE_LOOP('',(#13163,#13169,#13170,#13171)); +#13163 = ORIENTED_EDGE('',*,*,#13164,.T.); +#13164 = EDGE_CURVE('',#12375,#13125,#13165,.T.); +#13165 = LINE('',#13166,#13167); +#13166 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#13167 = VECTOR('',#13168,1.); +#13168 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13169 = ORIENTED_EDGE('',*,*,#13124,.T.); +#13170 = ORIENTED_EDGE('',*,*,#12677,.F.); +#13171 = ORIENTED_EDGE('',*,*,#12382,.T.); +#13172 = CYLINDRICAL_SURFACE('',#13173,0.5); +#13173 = AXIS2_PLACEMENT_3D('',#13174,#13175,#13176); +#13174 = CARTESIAN_POINT('',(4.95,1.,4.15)); +#13175 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#13176 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13177 = ADVANCED_FACE('',(#13178),#13184,.T.); +#13178 = FACE_BOUND('',#13179,.T.); +#13179 = EDGE_LOOP('',(#13180,#13181,#13182,#13183)); +#13180 = ORIENTED_EDGE('',*,*,#12374,.F.); +#13181 = ORIENTED_EDGE('',*,*,#13164,.T.); +#13182 = ORIENTED_EDGE('',*,*,#13133,.T.); +#13183 = ORIENTED_EDGE('',*,*,#12423,.F.); +#13184 = PLANE('',#13185); +#13185 = AXIS2_PLACEMENT_3D('',#13186,#13187,#13188); +#13186 = CARTESIAN_POINT('',(4.95,1.,3.65)); +#13187 = DIRECTION('',(0.,0.,1.)); +#13188 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13189 = ADVANCED_FACE('',(#13190,#13196,#13230),#13264,.T.); +#13190 = FACE_BOUND('',#13191,.T.); +#13191 = EDGE_LOOP('',(#13192,#13193,#13194,#13195)); +#13192 = ORIENTED_EDGE('',*,*,#12661,.T.); +#13193 = ORIENTED_EDGE('',*,*,#12472,.T.); +#13194 = ORIENTED_EDGE('',*,*,#12886,.T.); +#13195 = ORIENTED_EDGE('',*,*,#13117,.T.); +#13196 = FACE_BOUND('',#13197,.T.); +#13197 = EDGE_LOOP('',(#13198,#13208,#13216,#13224)); +#13198 = ORIENTED_EDGE('',*,*,#13199,.F.); +#13199 = EDGE_CURVE('',#13200,#13202,#13204,.T.); +#13200 = VERTEX_POINT('',#13201); +#13201 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#13202 = VERTEX_POINT('',#13203); +#13203 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#13204 = LINE('',#13205,#13206); +#13205 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#13206 = VECTOR('',#13207,1.); +#13207 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13208 = ORIENTED_EDGE('',*,*,#13209,.T.); +#13209 = EDGE_CURVE('',#13200,#13210,#13212,.T.); +#13210 = VERTEX_POINT('',#13211); +#13211 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#13212 = LINE('',#13213,#13214); +#13213 = CARTESIAN_POINT('',(0.785,0.32,1.85)); +#13214 = VECTOR('',#13215,1.); +#13215 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13216 = ORIENTED_EDGE('',*,*,#13217,.T.); +#13217 = EDGE_CURVE('',#13210,#13218,#13220,.T.); +#13218 = VERTEX_POINT('',#13219); +#13219 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#13220 = LINE('',#13221,#13222); +#13221 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#13222 = VECTOR('',#13223,1.); +#13223 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13224 = ORIENTED_EDGE('',*,*,#13225,.T.); +#13225 = EDGE_CURVE('',#13218,#13202,#13226,.T.); +#13226 = LINE('',#13227,#13228); +#13227 = CARTESIAN_POINT('',(0.785,-0.32,1.85)); +#13228 = VECTOR('',#13229,1.); +#13229 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13230 = FACE_BOUND('',#13231,.T.); +#13231 = EDGE_LOOP('',(#13232,#13242,#13250,#13258)); +#13232 = ORIENTED_EDGE('',*,*,#13233,.F.); +#13233 = EDGE_CURVE('',#13234,#13236,#13238,.T.); +#13234 = VERTEX_POINT('',#13235); +#13235 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#13236 = VERTEX_POINT('',#13237); +#13237 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#13238 = LINE('',#13239,#13240); +#13239 = CARTESIAN_POINT('',(2.18,-0.26920299558,1.85)); +#13240 = VECTOR('',#13241,1.); +#13241 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13242 = ORIENTED_EDGE('',*,*,#13243,.T.); +#13243 = EDGE_CURVE('',#13234,#13244,#13246,.T.); +#13244 = VERTEX_POINT('',#13245); +#13245 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#13246 = LINE('',#13247,#13248); +#13247 = CARTESIAN_POINT('',(2.035,0.32,1.85)); +#13248 = VECTOR('',#13249,1.); +#13249 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13250 = ORIENTED_EDGE('',*,*,#13251,.T.); +#13251 = EDGE_CURVE('',#13244,#13252,#13254,.T.); +#13252 = VERTEX_POINT('',#13253); +#13253 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#13254 = LINE('',#13255,#13256); +#13255 = CARTESIAN_POINT('',(2.82,-0.26920299558,1.85)); +#13256 = VECTOR('',#13257,1.); +#13257 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13258 = ORIENTED_EDGE('',*,*,#13259,.T.); +#13259 = EDGE_CURVE('',#13252,#13236,#13260,.T.); +#13260 = LINE('',#13261,#13262); +#13261 = CARTESIAN_POINT('',(2.035,-0.32,1.85)); +#13262 = VECTOR('',#13263,1.); +#13263 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13264 = PLANE('',#13265); +#13265 = AXIS2_PLACEMENT_3D('',#13266,#13267,#13268); +#13266 = CARTESIAN_POINT('',(1.25,-0.575,1.85)); +#13267 = DIRECTION('',(0.,0.,1.)); +#13268 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13269 = ADVANCED_FACE('',(#13270),#13281,.F.); +#13270 = FACE_BOUND('',#13271,.F.); +#13271 = EDGE_LOOP('',(#13272,#13273,#13279,#13280)); +#13272 = ORIENTED_EDGE('',*,*,#12814,.F.); +#13273 = ORIENTED_EDGE('',*,*,#13274,.T.); +#13274 = EDGE_CURVE('',#12807,#12637,#13275,.T.); +#13275 = LINE('',#13276,#13277); +#13276 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#13277 = VECTOR('',#13278,1.); +#13278 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13279 = ORIENTED_EDGE('',*,*,#12644,.F.); +#13280 = ORIENTED_EDGE('',*,*,#12692,.F.); +#13281 = PLANE('',#13282); +#13282 = AXIS2_PLACEMENT_3D('',#13283,#13284,#13285); +#13283 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#13284 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13285 = DIRECTION('',(0.,0.,1.)); +#13286 = ADVANCED_FACE('',(#13287),#13298,.F.); +#13287 = FACE_BOUND('',#13288,.F.); +#13288 = EDGE_LOOP('',(#13289,#13290,#13296,#13297)); +#13289 = ORIENTED_EDGE('',*,*,#12806,.F.); +#13290 = ORIENTED_EDGE('',*,*,#13291,.T.); +#13291 = EDGE_CURVE('',#12799,#12629,#13292,.T.); +#13292 = LINE('',#13293,#13294); +#13293 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#13294 = VECTOR('',#13295,1.); +#13295 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13296 = ORIENTED_EDGE('',*,*,#12636,.F.); +#13297 = ORIENTED_EDGE('',*,*,#13274,.F.); +#13298 = PLANE('',#13299); +#13299 = AXIS2_PLACEMENT_3D('',#13300,#13301,#13302); +#13300 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#13301 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13302 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13303 = ADVANCED_FACE('',(#13304),#13315,.F.); +#13304 = FACE_BOUND('',#13305,.F.); +#13305 = EDGE_LOOP('',(#13306,#13307,#13313,#13314)); +#13306 = ORIENTED_EDGE('',*,*,#12798,.F.); +#13307 = ORIENTED_EDGE('',*,*,#13308,.T.); +#13308 = EDGE_CURVE('',#12791,#12621,#13309,.T.); +#13309 = LINE('',#13310,#13311); +#13310 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#13311 = VECTOR('',#13312,1.); +#13312 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13313 = ORIENTED_EDGE('',*,*,#12628,.F.); +#13314 = ORIENTED_EDGE('',*,*,#13291,.F.); +#13315 = PLANE('',#13316); +#13316 = AXIS2_PLACEMENT_3D('',#13317,#13318,#13319); +#13317 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#13318 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13319 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#13320 = ADVANCED_FACE('',(#13321),#13332,.F.); +#13321 = FACE_BOUND('',#13322,.F.); +#13322 = EDGE_LOOP('',(#13323,#13324,#13330,#13331)); +#13323 = ORIENTED_EDGE('',*,*,#12790,.F.); +#13324 = ORIENTED_EDGE('',*,*,#13325,.T.); +#13325 = EDGE_CURVE('',#12782,#12612,#13326,.T.); +#13326 = LINE('',#13327,#13328); +#13327 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#13328 = VECTOR('',#13329,1.); +#13329 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13330 = ORIENTED_EDGE('',*,*,#12620,.F.); +#13331 = ORIENTED_EDGE('',*,*,#13308,.F.); +#13332 = PLANE('',#13333); +#13333 = AXIS2_PLACEMENT_3D('',#13334,#13335,#13336); +#13334 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#13335 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13336 = DIRECTION('',(0.,0.,1.)); +#13337 = ADVANCED_FACE('',(#13338),#13349,.F.); +#13338 = FACE_BOUND('',#13339,.F.); +#13339 = EDGE_LOOP('',(#13340,#13341,#13342,#13343)); +#13340 = ORIENTED_EDGE('',*,*,#12611,.F.); +#13341 = ORIENTED_EDGE('',*,*,#13325,.F.); +#13342 = ORIENTED_EDGE('',*,*,#12781,.F.); +#13343 = ORIENTED_EDGE('',*,*,#13344,.T.); +#13344 = EDGE_CURVE('',#12774,#12604,#13345,.T.); +#13345 = LINE('',#13346,#13347); +#13346 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#13347 = VECTOR('',#13348,1.); +#13348 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13349 = CYLINDRICAL_SURFACE('',#13350,0.75); +#13350 = AXIS2_PLACEMENT_3D('',#13351,#13352,#13353); +#13351 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#13352 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13353 = DIRECTION('',(-0.,0.,-1.)); +#13354 = ADVANCED_FACE('',(#13355),#13366,.F.); +#13355 = FACE_BOUND('',#13356,.F.); +#13356 = EDGE_LOOP('',(#13357,#13358,#13359,#13365)); +#13357 = ORIENTED_EDGE('',*,*,#13344,.F.); +#13358 = ORIENTED_EDGE('',*,*,#12773,.T.); +#13359 = ORIENTED_EDGE('',*,*,#13360,.T.); +#13360 = EDGE_CURVE('',#12765,#12595,#13361,.T.); +#13361 = LINE('',#13362,#13363); +#13362 = CARTESIAN_POINT('',(2.25,2.35,3.1)); +#13363 = VECTOR('',#13364,1.); +#13364 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13365 = ORIENTED_EDGE('',*,*,#12603,.F.); +#13366 = PLANE('',#13367); +#13367 = AXIS2_PLACEMENT_3D('',#13368,#13369,#13370); +#13368 = CARTESIAN_POINT('',(1.25,1.85,3.1)); +#13369 = DIRECTION('',(1.288101310069E-46,1.051814540295E-30,-1.)); +#13370 = DIRECTION('',(1.224646799147E-16,1.,1.051814540295E-30)); +#13371 = ADVANCED_FACE('',(#13372),#13383,.F.); +#13372 = FACE_BOUND('',#13373,.F.); +#13373 = EDGE_LOOP('',(#13374,#13375,#13376,#13382)); +#13374 = ORIENTED_EDGE('',*,*,#13360,.F.); +#13375 = ORIENTED_EDGE('',*,*,#12764,.T.); +#13376 = ORIENTED_EDGE('',*,*,#13377,.T.); +#13377 = EDGE_CURVE('',#12757,#12587,#13378,.T.); +#13378 = LINE('',#13379,#13380); +#13379 = CARTESIAN_POINT('',(3.,2.35,3.85)); +#13380 = VECTOR('',#13381,1.); +#13381 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13382 = ORIENTED_EDGE('',*,*,#12594,.F.); +#13383 = CYLINDRICAL_SURFACE('',#13384,0.75); +#13384 = AXIS2_PLACEMENT_3D('',#13385,#13386,#13387); +#13385 = CARTESIAN_POINT('',(2.25,2.35,3.85)); +#13386 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13387 = DIRECTION('',(0.,-0.,-1.)); +#13388 = ADVANCED_FACE('',(#13389),#13400,.T.); +#13389 = FACE_BOUND('',#13390,.T.); +#13390 = EDGE_LOOP('',(#13391,#13392,#13393,#13394)); +#13391 = ORIENTED_EDGE('',*,*,#12756,.F.); +#13392 = ORIENTED_EDGE('',*,*,#13377,.T.); +#13393 = ORIENTED_EDGE('',*,*,#12586,.F.); +#13394 = ORIENTED_EDGE('',*,*,#13395,.F.); +#13395 = EDGE_CURVE('',#12749,#12579,#13396,.T.); +#13396 = LINE('',#13397,#13398); +#13397 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#13398 = VECTOR('',#13399,1.); +#13399 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13400 = PLANE('',#13401); +#13401 = AXIS2_PLACEMENT_3D('',#13402,#13403,#13404); +#13402 = CARTESIAN_POINT('',(3.,2.35,3.1)); +#13403 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13404 = DIRECTION('',(0.,0.,1.)); +#13405 = ADVANCED_FACE('',(#13406),#13417,.T.); +#13406 = FACE_BOUND('',#13407,.T.); +#13407 = EDGE_LOOP('',(#13408,#13409,#13410,#13411)); +#13408 = ORIENTED_EDGE('',*,*,#12748,.F.); +#13409 = ORIENTED_EDGE('',*,*,#13395,.T.); +#13410 = ORIENTED_EDGE('',*,*,#12578,.F.); +#13411 = ORIENTED_EDGE('',*,*,#13412,.F.); +#13412 = EDGE_CURVE('',#12741,#12571,#13413,.T.); +#13413 = LINE('',#13414,#13415); +#13414 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#13415 = VECTOR('',#13416,1.); +#13416 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13417 = PLANE('',#13418); +#13418 = AXIS2_PLACEMENT_3D('',#13419,#13420,#13421); +#13419 = CARTESIAN_POINT('',(3.,2.35,5.6)); +#13420 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13421 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13422 = ADVANCED_FACE('',(#13423),#13434,.T.); +#13423 = FACE_BOUND('',#13424,.T.); +#13424 = EDGE_LOOP('',(#13425,#13426,#13427,#13428)); +#13425 = ORIENTED_EDGE('',*,*,#12740,.F.); +#13426 = ORIENTED_EDGE('',*,*,#13412,.T.); +#13427 = ORIENTED_EDGE('',*,*,#12570,.F.); +#13428 = ORIENTED_EDGE('',*,*,#13429,.F.); +#13429 = EDGE_CURVE('',#12733,#12563,#13430,.T.); +#13430 = LINE('',#13431,#13432); +#13431 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#13432 = VECTOR('',#13433,1.); +#13433 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13434 = PLANE('',#13435); +#13435 = AXIS2_PLACEMENT_3D('',#13436,#13437,#13438); +#13436 = CARTESIAN_POINT('',(2.75,2.35,5.85)); +#13437 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13438 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#13439 = ADVANCED_FACE('',(#13440),#13446,.T.); +#13440 = FACE_BOUND('',#13441,.T.); +#13441 = EDGE_LOOP('',(#13442,#13443,#13444,#13445)); +#13442 = ORIENTED_EDGE('',*,*,#12732,.F.); +#13443 = ORIENTED_EDGE('',*,*,#13429,.T.); +#13444 = ORIENTED_EDGE('',*,*,#12562,.F.); +#13445 = ORIENTED_EDGE('',*,*,#13150,.F.); +#13446 = PLANE('',#13447); +#13447 = AXIS2_PLACEMENT_3D('',#13448,#13449,#13450); +#13448 = CARTESIAN_POINT('',(3.,2.35,6.1)); +#13449 = DIRECTION('',(-1.,1.224646799147E-16,2.467162276945E-16)); +#13450 = DIRECTION('',(2.467162276945E-16,-3.021402385438E-32,1.)); +#13451 = ADVANCED_FACE('',(#13452),#13463,.F.); +#13452 = FACE_BOUND('',#13453,.F.); +#13453 = EDGE_LOOP('',(#13454,#13455,#13456,#13462)); +#13454 = ORIENTED_EDGE('',*,*,#12863,.T.); +#13455 = ORIENTED_EDGE('',*,*,#13015,.T.); +#13456 = ORIENTED_EDGE('',*,*,#13457,.F.); +#13457 = EDGE_CURVE('',#13073,#13016,#13458,.T.); +#13458 = LINE('',#13459,#13460); +#13459 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13460 = VECTOR('',#13461,1.); +#13461 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13462 = ORIENTED_EDGE('',*,*,#13072,.F.); +#13463 = PLANE('',#13464); +#13464 = AXIS2_PLACEMENT_3D('',#13465,#13466,#13467); +#13465 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#13466 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13467 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13468 = ADVANCED_FACE('',(#13469),#13480,.F.); +#13469 = FACE_BOUND('',#13470,.F.); +#13470 = EDGE_LOOP('',(#13471,#13472,#13473,#13479)); +#13471 = ORIENTED_EDGE('',*,*,#12831,.T.); +#13472 = ORIENTED_EDGE('',*,*,#12910,.T.); +#13473 = ORIENTED_EDGE('',*,*,#13474,.F.); +#13474 = EDGE_CURVE('',#12968,#12911,#13475,.T.); +#13475 = LINE('',#13476,#13477); +#13476 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#13477 = VECTOR('',#13478,1.); +#13478 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13479 = ORIENTED_EDGE('',*,*,#12967,.F.); +#13480 = PLANE('',#13481); +#13481 = AXIS2_PLACEMENT_3D('',#13482,#13483,#13484); +#13482 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#13483 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13484 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13485 = ADVANCED_FACE('',(#13486,#13492),#13526,.F.); +#13486 = FACE_BOUND('',#13487,.F.); +#13487 = EDGE_LOOP('',(#13488,#13489,#13490,#13491)); +#13488 = ORIENTED_EDGE('',*,*,#13474,.T.); +#13489 = ORIENTED_EDGE('',*,*,#12918,.T.); +#13490 = ORIENTED_EDGE('',*,*,#12942,.F.); +#13491 = ORIENTED_EDGE('',*,*,#12975,.F.); +#13492 = FACE_BOUND('',#13493,.F.); +#13493 = EDGE_LOOP('',(#13494,#13504,#13512,#13520)); +#13494 = ORIENTED_EDGE('',*,*,#13495,.F.); +#13495 = EDGE_CURVE('',#13496,#13498,#13500,.T.); +#13496 = VERTEX_POINT('',#13497); +#13497 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#13498 = VERTEX_POINT('',#13499); +#13499 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#13500 = LINE('',#13501,#13502); +#13501 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#13502 = VECTOR('',#13503,1.); +#13503 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13504 = ORIENTED_EDGE('',*,*,#13505,.T.); +#13505 = EDGE_CURVE('',#13496,#13506,#13508,.T.); +#13506 = VERTEX_POINT('',#13507); +#13507 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#13508 = LINE('',#13509,#13510); +#13509 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#13510 = VECTOR('',#13511,1.); +#13511 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13512 = ORIENTED_EDGE('',*,*,#13513,.T.); +#13513 = EDGE_CURVE('',#13506,#13514,#13516,.T.); +#13514 = VERTEX_POINT('',#13515); +#13515 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#13516 = LINE('',#13517,#13518); +#13517 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#13518 = VECTOR('',#13519,1.); +#13519 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13520 = ORIENTED_EDGE('',*,*,#13521,.T.); +#13521 = EDGE_CURVE('',#13514,#13498,#13522,.T.); +#13522 = LINE('',#13523,#13524); +#13523 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#13524 = VECTOR('',#13525,1.); +#13525 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13526 = PLANE('',#13527); +#13527 = AXIS2_PLACEMENT_3D('',#13528,#13529,#13530); +#13528 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#13529 = DIRECTION('',(0.,0.,1.)); +#13530 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13531 = ADVANCED_FACE('',(#13532,#13538),#13572,.F.); +#13532 = FACE_BOUND('',#13533,.F.); +#13533 = EDGE_LOOP('',(#13534,#13535,#13536,#13537)); +#13534 = ORIENTED_EDGE('',*,*,#13457,.T.); +#13535 = ORIENTED_EDGE('',*,*,#13023,.T.); +#13536 = ORIENTED_EDGE('',*,*,#13047,.F.); +#13537 = ORIENTED_EDGE('',*,*,#13080,.F.); +#13538 = FACE_BOUND('',#13539,.F.); +#13539 = EDGE_LOOP('',(#13540,#13550,#13558,#13566)); +#13540 = ORIENTED_EDGE('',*,*,#13541,.F.); +#13541 = EDGE_CURVE('',#13542,#13544,#13546,.T.); +#13542 = VERTEX_POINT('',#13543); +#13543 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#13544 = VERTEX_POINT('',#13545); +#13545 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#13546 = LINE('',#13547,#13548); +#13547 = CARTESIAN_POINT('',(2.18,0.26829700442,0.3)); +#13548 = VECTOR('',#13549,1.); +#13549 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13550 = ORIENTED_EDGE('',*,*,#13551,.T.); +#13551 = EDGE_CURVE('',#13542,#13552,#13554,.T.); +#13552 = VERTEX_POINT('',#13553); +#13553 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#13554 = LINE('',#13555,#13556); +#13555 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#13556 = VECTOR('',#13557,1.); +#13557 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13558 = ORIENTED_EDGE('',*,*,#13559,.T.); +#13559 = EDGE_CURVE('',#13552,#13560,#13562,.T.); +#13560 = VERTEX_POINT('',#13561); +#13561 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#13562 = LINE('',#13563,#13564); +#13563 = CARTESIAN_POINT('',(2.82,0.26829700442,0.3)); +#13564 = VECTOR('',#13565,1.); +#13565 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13566 = ORIENTED_EDGE('',*,*,#13567,.T.); +#13567 = EDGE_CURVE('',#13560,#13544,#13568,.T.); +#13568 = LINE('',#13569,#13570); +#13569 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#13570 = VECTOR('',#13571,1.); +#13571 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13572 = PLANE('',#13573); +#13573 = AXIS2_PLACEMENT_3D('',#13574,#13575,#13576); +#13574 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13575 = DIRECTION('',(0.,0.,1.)); +#13576 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13577 = ADVANCED_FACE('',(#13578),#13603,.T.); +#13578 = FACE_BOUND('',#13579,.T.); +#13579 = EDGE_LOOP('',(#13580,#13581,#13589,#13597)); +#13580 = ORIENTED_EDGE('',*,*,#13199,.T.); +#13581 = ORIENTED_EDGE('',*,*,#13582,.T.); +#13582 = EDGE_CURVE('',#13202,#13583,#13585,.T.); +#13583 = VERTEX_POINT('',#13584); +#13584 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#13585 = LINE('',#13586,#13587); +#13586 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13587 = VECTOR('',#13588,1.); +#13588 = DIRECTION('',(0.,0.,1.)); +#13589 = ORIENTED_EDGE('',*,*,#13590,.T.); +#13590 = EDGE_CURVE('',#13583,#13591,#13593,.T.); +#13591 = VERTEX_POINT('',#13592); +#13592 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#13593 = LINE('',#13594,#13595); +#13594 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#13595 = VECTOR('',#13596,1.); +#13596 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13597 = ORIENTED_EDGE('',*,*,#13598,.T.); +#13598 = EDGE_CURVE('',#13591,#13200,#13599,.T.); +#13599 = LINE('',#13600,#13601); +#13600 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#13601 = VECTOR('',#13602,1.); +#13602 = DIRECTION('',(-0.,0.,-1.)); +#13603 = PLANE('',#13604); +#13604 = AXIS2_PLACEMENT_3D('',#13605,#13606,#13607); +#13605 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#13606 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13607 = DIRECTION('',(0.,0.,1.)); +#13608 = ADVANCED_FACE('',(#13609),#13627,.F.); +#13609 = FACE_BOUND('',#13610,.F.); +#13610 = EDGE_LOOP('',(#13611,#13619,#13620,#13621)); +#13611 = ORIENTED_EDGE('',*,*,#13612,.F.); +#13612 = EDGE_CURVE('',#13218,#13613,#13615,.T.); +#13613 = VERTEX_POINT('',#13614); +#13614 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13615 = LINE('',#13616,#13617); +#13616 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13617 = VECTOR('',#13618,1.); +#13618 = DIRECTION('',(0.,0.,1.)); +#13619 = ORIENTED_EDGE('',*,*,#13225,.T.); +#13620 = ORIENTED_EDGE('',*,*,#13582,.T.); +#13621 = ORIENTED_EDGE('',*,*,#13622,.F.); +#13622 = EDGE_CURVE('',#13613,#13583,#13623,.T.); +#13623 = LINE('',#13624,#13625); +#13624 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13625 = VECTOR('',#13626,1.); +#13626 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13627 = PLANE('',#13628); +#13628 = AXIS2_PLACEMENT_3D('',#13629,#13630,#13631); +#13629 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13630 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13631 = DIRECTION('',(0.,-0.,1.)); +#13632 = ADVANCED_FACE('',(#13633),#13651,.F.); +#13633 = FACE_BOUND('',#13634,.F.); +#13634 = EDGE_LOOP('',(#13635,#13636,#13637,#13645)); +#13635 = ORIENTED_EDGE('',*,*,#13217,.T.); +#13636 = ORIENTED_EDGE('',*,*,#13612,.T.); +#13637 = ORIENTED_EDGE('',*,*,#13638,.T.); +#13638 = EDGE_CURVE('',#13613,#13639,#13641,.T.); +#13639 = VERTEX_POINT('',#13640); +#13640 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#13641 = LINE('',#13642,#13643); +#13642 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13643 = VECTOR('',#13644,1.); +#13644 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13645 = ORIENTED_EDGE('',*,*,#13646,.T.); +#13646 = EDGE_CURVE('',#13639,#13210,#13647,.T.); +#13647 = LINE('',#13648,#13649); +#13648 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13649 = VECTOR('',#13650,1.); +#13650 = DIRECTION('',(-0.,0.,-1.)); +#13651 = PLANE('',#13652); +#13652 = AXIS2_PLACEMENT_3D('',#13653,#13654,#13655); +#13653 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#13654 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13655 = DIRECTION('',(0.,0.,1.)); +#13656 = ADVANCED_FACE('',(#13657),#13668,.F.); +#13657 = FACE_BOUND('',#13658,.F.); +#13658 = EDGE_LOOP('',(#13659,#13660,#13666,#13667)); +#13659 = ORIENTED_EDGE('',*,*,#13646,.F.); +#13660 = ORIENTED_EDGE('',*,*,#13661,.T.); +#13661 = EDGE_CURVE('',#13639,#13591,#13662,.T.); +#13662 = LINE('',#13663,#13664); +#13663 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#13664 = VECTOR('',#13665,1.); +#13665 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13666 = ORIENTED_EDGE('',*,*,#13598,.T.); +#13667 = ORIENTED_EDGE('',*,*,#13209,.T.); +#13668 = PLANE('',#13669); +#13669 = AXIS2_PLACEMENT_3D('',#13670,#13671,#13672); +#13670 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13671 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13672 = DIRECTION('',(-0.,0.,-1.)); +#13673 = ADVANCED_FACE('',(#13674),#13699,.T.); +#13674 = FACE_BOUND('',#13675,.T.); +#13675 = EDGE_LOOP('',(#13676,#13677,#13685,#13693)); +#13676 = ORIENTED_EDGE('',*,*,#13233,.T.); +#13677 = ORIENTED_EDGE('',*,*,#13678,.T.); +#13678 = EDGE_CURVE('',#13236,#13679,#13681,.T.); +#13679 = VERTEX_POINT('',#13680); +#13680 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#13681 = LINE('',#13682,#13683); +#13682 = CARTESIAN_POINT('',(2.18,-0.32,-0.9)); +#13683 = VECTOR('',#13684,1.); +#13684 = DIRECTION('',(0.,0.,1.)); +#13685 = ORIENTED_EDGE('',*,*,#13686,.T.); +#13686 = EDGE_CURVE('',#13679,#13687,#13689,.T.); +#13687 = VERTEX_POINT('',#13688); +#13688 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#13689 = LINE('',#13690,#13691); +#13690 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#13691 = VECTOR('',#13692,1.); +#13692 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13693 = ORIENTED_EDGE('',*,*,#13694,.T.); +#13694 = EDGE_CURVE('',#13687,#13234,#13695,.T.); +#13695 = LINE('',#13696,#13697); +#13696 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#13697 = VECTOR('',#13698,1.); +#13698 = DIRECTION('',(-0.,0.,-1.)); +#13699 = PLANE('',#13700); +#13700 = AXIS2_PLACEMENT_3D('',#13701,#13702,#13703); +#13701 = CARTESIAN_POINT('',(2.18,3.65940088399E-02,1.522832428212)); +#13702 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13703 = DIRECTION('',(0.,0.,1.)); +#13704 = ADVANCED_FACE('',(#13705),#13723,.F.); +#13705 = FACE_BOUND('',#13706,.F.); +#13706 = EDGE_LOOP('',(#13707,#13715,#13716,#13717)); +#13707 = ORIENTED_EDGE('',*,*,#13708,.F.); +#13708 = EDGE_CURVE('',#13252,#13709,#13711,.T.); +#13709 = VERTEX_POINT('',#13710); +#13710 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13711 = LINE('',#13712,#13713); +#13712 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#13713 = VECTOR('',#13714,1.); +#13714 = DIRECTION('',(0.,0.,1.)); +#13715 = ORIENTED_EDGE('',*,*,#13259,.T.); +#13716 = ORIENTED_EDGE('',*,*,#13678,.T.); +#13717 = ORIENTED_EDGE('',*,*,#13718,.F.); +#13718 = EDGE_CURVE('',#13709,#13679,#13719,.T.); +#13719 = LINE('',#13720,#13721); +#13720 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13721 = VECTOR('',#13722,1.); +#13722 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13723 = PLANE('',#13724); +#13724 = AXIS2_PLACEMENT_3D('',#13725,#13726,#13727); +#13725 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#13726 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13727 = DIRECTION('',(0.,-0.,1.)); +#13728 = ADVANCED_FACE('',(#13729),#13747,.F.); +#13729 = FACE_BOUND('',#13730,.F.); +#13730 = EDGE_LOOP('',(#13731,#13732,#13733,#13741)); +#13731 = ORIENTED_EDGE('',*,*,#13251,.T.); +#13732 = ORIENTED_EDGE('',*,*,#13708,.T.); +#13733 = ORIENTED_EDGE('',*,*,#13734,.T.); +#13734 = EDGE_CURVE('',#13709,#13735,#13737,.T.); +#13735 = VERTEX_POINT('',#13736); +#13736 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#13737 = LINE('',#13738,#13739); +#13738 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13739 = VECTOR('',#13740,1.); +#13740 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13741 = ORIENTED_EDGE('',*,*,#13742,.T.); +#13742 = EDGE_CURVE('',#13735,#13244,#13743,.T.); +#13743 = LINE('',#13744,#13745); +#13744 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#13745 = VECTOR('',#13746,1.); +#13746 = DIRECTION('',(-0.,0.,-1.)); +#13747 = PLANE('',#13748); +#13748 = AXIS2_PLACEMENT_3D('',#13749,#13750,#13751); +#13749 = CARTESIAN_POINT('',(2.82,3.65940088399E-02,1.522832428212)); +#13750 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13751 = DIRECTION('',(0.,0.,1.)); +#13752 = ADVANCED_FACE('',(#13753),#13764,.F.); +#13753 = FACE_BOUND('',#13754,.F.); +#13754 = EDGE_LOOP('',(#13755,#13756,#13762,#13763)); +#13755 = ORIENTED_EDGE('',*,*,#13742,.F.); +#13756 = ORIENTED_EDGE('',*,*,#13757,.T.); +#13757 = EDGE_CURVE('',#13735,#13687,#13758,.T.); +#13758 = LINE('',#13759,#13760); +#13759 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#13760 = VECTOR('',#13761,1.); +#13761 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13762 = ORIENTED_EDGE('',*,*,#13694,.T.); +#13763 = ORIENTED_EDGE('',*,*,#13243,.T.); +#13764 = PLANE('',#13765); +#13765 = AXIS2_PLACEMENT_3D('',#13766,#13767,#13768); +#13766 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#13767 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13768 = DIRECTION('',(-0.,0.,-1.)); +#13769 = ADVANCED_FACE('',(#13770),#13827,.T.); +#13770 = FACE_BOUND('',#13771,.T.); +#13771 = EDGE_LOOP('',(#13772,#13782,#13790,#13798,#13804,#13805,#13813, + #13821)); +#13772 = ORIENTED_EDGE('',*,*,#13773,.T.); +#13773 = EDGE_CURVE('',#13774,#13776,#13778,.T.); +#13774 = VERTEX_POINT('',#13775); +#13775 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#13776 = VERTEX_POINT('',#13777); +#13777 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#13778 = LINE('',#13779,#13780); +#13779 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#13780 = VECTOR('',#13781,1.); +#13781 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13782 = ORIENTED_EDGE('',*,*,#13783,.T.); +#13783 = EDGE_CURVE('',#13776,#13784,#13786,.T.); +#13784 = VERTEX_POINT('',#13785); +#13785 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#13786 = LINE('',#13787,#13788); +#13787 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#13788 = VECTOR('',#13789,1.); +#13789 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#13790 = ORIENTED_EDGE('',*,*,#13791,.T.); +#13791 = EDGE_CURVE('',#13784,#13792,#13794,.T.); +#13792 = VERTEX_POINT('',#13793); +#13793 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13794 = LINE('',#13795,#13796); +#13795 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#13796 = VECTOR('',#13797,1.); +#13797 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#13798 = ORIENTED_EDGE('',*,*,#13799,.T.); +#13799 = EDGE_CURVE('',#13792,#13498,#13800,.T.); +#13800 = LINE('',#13801,#13802); +#13801 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13802 = VECTOR('',#13803,1.); +#13803 = DIRECTION('',(0.,0.,1.)); +#13804 = ORIENTED_EDGE('',*,*,#13495,.F.); +#13805 = ORIENTED_EDGE('',*,*,#13806,.T.); +#13806 = EDGE_CURVE('',#13496,#13807,#13809,.T.); +#13807 = VERTEX_POINT('',#13808); +#13808 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#13809 = LINE('',#13810,#13811); +#13810 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#13811 = VECTOR('',#13812,1.); +#13812 = DIRECTION('',(-0.,0.,-1.)); +#13813 = ORIENTED_EDGE('',*,*,#13814,.T.); +#13814 = EDGE_CURVE('',#13807,#13815,#13817,.T.); +#13815 = VERTEX_POINT('',#13816); +#13816 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#13817 = LINE('',#13818,#13819); +#13818 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#13819 = VECTOR('',#13820,1.); +#13820 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#13821 = ORIENTED_EDGE('',*,*,#13822,.T.); +#13822 = EDGE_CURVE('',#13815,#13774,#13823,.T.); +#13823 = LINE('',#13824,#13825); +#13824 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#13825 = VECTOR('',#13826,1.); +#13826 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#13827 = PLANE('',#13828); +#13828 = AXIS2_PLACEMENT_3D('',#13829,#13830,#13831); +#13829 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#13830 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13831 = DIRECTION('',(0.,0.,1.)); +#13832 = ADVANCED_FACE('',(#13833),#13851,.F.); +#13833 = FACE_BOUND('',#13834,.F.); +#13834 = EDGE_LOOP('',(#13835,#13843,#13849,#13850)); +#13835 = ORIENTED_EDGE('',*,*,#13836,.F.); +#13836 = EDGE_CURVE('',#13837,#13514,#13839,.T.); +#13837 = VERTEX_POINT('',#13838); +#13838 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13839 = LINE('',#13840,#13841); +#13840 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13841 = VECTOR('',#13842,1.); +#13842 = DIRECTION('',(0.,0.,1.)); +#13843 = ORIENTED_EDGE('',*,*,#13844,.T.); +#13844 = EDGE_CURVE('',#13837,#13792,#13845,.T.); +#13845 = LINE('',#13846,#13847); +#13846 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13847 = VECTOR('',#13848,1.); +#13848 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13849 = ORIENTED_EDGE('',*,*,#13799,.T.); +#13850 = ORIENTED_EDGE('',*,*,#13521,.F.); +#13851 = PLANE('',#13852); +#13852 = AXIS2_PLACEMENT_3D('',#13853,#13854,#13855); +#13853 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13854 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13855 = DIRECTION('',(0.,-0.,1.)); +#13856 = ADVANCED_FACE('',(#13857),#13907,.F.); +#13857 = FACE_BOUND('',#13858,.F.); +#13858 = EDGE_LOOP('',(#13859,#13869,#13877,#13883,#13884,#13885,#13893, + #13901)); +#13859 = ORIENTED_EDGE('',*,*,#13860,.T.); +#13860 = EDGE_CURVE('',#13861,#13863,#13865,.T.); +#13861 = VERTEX_POINT('',#13862); +#13862 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#13863 = VERTEX_POINT('',#13864); +#13864 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#13865 = LINE('',#13866,#13867); +#13866 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#13867 = VECTOR('',#13868,1.); +#13868 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13869 = ORIENTED_EDGE('',*,*,#13870,.T.); +#13870 = EDGE_CURVE('',#13863,#13871,#13873,.T.); +#13871 = VERTEX_POINT('',#13872); +#13872 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#13873 = LINE('',#13874,#13875); +#13874 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#13875 = VECTOR('',#13876,1.); +#13876 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#13877 = ORIENTED_EDGE('',*,*,#13878,.T.); +#13878 = EDGE_CURVE('',#13871,#13837,#13879,.T.); +#13879 = LINE('',#13880,#13881); +#13880 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#13881 = VECTOR('',#13882,1.); +#13882 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#13883 = ORIENTED_EDGE('',*,*,#13836,.T.); +#13884 = ORIENTED_EDGE('',*,*,#13513,.F.); +#13885 = ORIENTED_EDGE('',*,*,#13886,.T.); +#13886 = EDGE_CURVE('',#13506,#13887,#13889,.T.); +#13887 = VERTEX_POINT('',#13888); +#13888 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#13889 = LINE('',#13890,#13891); +#13890 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13891 = VECTOR('',#13892,1.); +#13892 = DIRECTION('',(-0.,0.,-1.)); +#13893 = ORIENTED_EDGE('',*,*,#13894,.T.); +#13894 = EDGE_CURVE('',#13887,#13895,#13897,.T.); +#13895 = VERTEX_POINT('',#13896); +#13896 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#13897 = LINE('',#13898,#13899); +#13898 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#13899 = VECTOR('',#13900,1.); +#13900 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#13901 = ORIENTED_EDGE('',*,*,#13902,.T.); +#13902 = EDGE_CURVE('',#13895,#13861,#13903,.T.); +#13903 = LINE('',#13904,#13905); +#13904 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#13905 = VECTOR('',#13906,1.); +#13906 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#13907 = PLANE('',#13908); +#13908 = AXIS2_PLACEMENT_3D('',#13909,#13910,#13911); +#13909 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#13910 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13911 = DIRECTION('',(0.,0.,1.)); +#13912 = ADVANCED_FACE('',(#13913),#13924,.F.); +#13913 = FACE_BOUND('',#13914,.F.); +#13914 = EDGE_LOOP('',(#13915,#13916,#13917,#13918)); +#13915 = ORIENTED_EDGE('',*,*,#13886,.F.); +#13916 = ORIENTED_EDGE('',*,*,#13505,.F.); +#13917 = ORIENTED_EDGE('',*,*,#13806,.T.); +#13918 = ORIENTED_EDGE('',*,*,#13919,.F.); +#13919 = EDGE_CURVE('',#13887,#13807,#13920,.T.); +#13920 = LINE('',#13921,#13922); +#13921 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#13922 = VECTOR('',#13923,1.); +#13923 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13924 = PLANE('',#13925); +#13925 = AXIS2_PLACEMENT_3D('',#13926,#13927,#13928); +#13926 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13927 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13928 = DIRECTION('',(-0.,0.,-1.)); +#13929 = ADVANCED_FACE('',(#13930),#13987,.T.); +#13930 = FACE_BOUND('',#13931,.T.); +#13931 = EDGE_LOOP('',(#13932,#13942,#13950,#13958,#13964,#13965,#13973, + #13981)); +#13932 = ORIENTED_EDGE('',*,*,#13933,.T.); +#13933 = EDGE_CURVE('',#13934,#13936,#13938,.T.); +#13934 = VERTEX_POINT('',#13935); +#13935 = CARTESIAN_POINT('',(2.18,0.351578947368,-3.2)); +#13936 = VERTEX_POINT('',#13937); +#13937 = CARTESIAN_POINT('',(2.18,-0.288421052632,-3.2)); +#13938 = LINE('',#13939,#13940); +#13939 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#13940 = VECTOR('',#13941,1.); +#13941 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13942 = ORIENTED_EDGE('',*,*,#13943,.T.); +#13943 = EDGE_CURVE('',#13936,#13944,#13946,.T.); +#13944 = VERTEX_POINT('',#13945); +#13945 = CARTESIAN_POINT('',(2.18,-2.E-02,-1.5)); +#13946 = LINE('',#13947,#13948); +#13947 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#13948 = VECTOR('',#13949,1.); +#13949 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#13950 = ORIENTED_EDGE('',*,*,#13951,.T.); +#13951 = EDGE_CURVE('',#13944,#13952,#13954,.T.); +#13952 = VERTEX_POINT('',#13953); +#13953 = CARTESIAN_POINT('',(2.18,-0.32,-0.9)); +#13954 = LINE('',#13955,#13956); +#13955 = CARTESIAN_POINT('',(2.18,-2.E-02,-1.5)); +#13956 = VECTOR('',#13957,1.); +#13957 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#13958 = ORIENTED_EDGE('',*,*,#13959,.T.); +#13959 = EDGE_CURVE('',#13952,#13544,#13960,.T.); +#13960 = LINE('',#13961,#13962); +#13961 = CARTESIAN_POINT('',(2.18,-0.32,-0.9)); +#13962 = VECTOR('',#13963,1.); +#13963 = DIRECTION('',(0.,0.,1.)); +#13964 = ORIENTED_EDGE('',*,*,#13541,.F.); +#13965 = ORIENTED_EDGE('',*,*,#13966,.T.); +#13966 = EDGE_CURVE('',#13542,#13967,#13969,.T.); +#13967 = VERTEX_POINT('',#13968); +#13968 = CARTESIAN_POINT('',(2.18,0.32,-0.9)); +#13969 = LINE('',#13970,#13971); +#13970 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#13971 = VECTOR('',#13972,1.); +#13972 = DIRECTION('',(-0.,0.,-1.)); +#13973 = ORIENTED_EDGE('',*,*,#13974,.T.); +#13974 = EDGE_CURVE('',#13967,#13975,#13977,.T.); +#13975 = VERTEX_POINT('',#13976); +#13976 = CARTESIAN_POINT('',(2.18,0.62,-1.5)); +#13977 = LINE('',#13978,#13979); +#13978 = CARTESIAN_POINT('',(2.18,0.32,-0.9)); +#13979 = VECTOR('',#13980,1.); +#13980 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#13981 = ORIENTED_EDGE('',*,*,#13982,.T.); +#13982 = EDGE_CURVE('',#13975,#13934,#13983,.T.); +#13983 = LINE('',#13984,#13985); +#13984 = CARTESIAN_POINT('',(2.18,0.62,-1.5)); +#13985 = VECTOR('',#13986,1.); +#13986 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#13987 = PLANE('',#13988); +#13988 = AXIS2_PLACEMENT_3D('',#13989,#13990,#13991); +#13989 = CARTESIAN_POINT('',(2.18,3.65940088399E-02,1.522832428212)); +#13990 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13991 = DIRECTION('',(0.,0.,1.)); +#13992 = ADVANCED_FACE('',(#13993),#14011,.F.); +#13993 = FACE_BOUND('',#13994,.F.); +#13994 = EDGE_LOOP('',(#13995,#14003,#14009,#14010)); +#13995 = ORIENTED_EDGE('',*,*,#13996,.F.); +#13996 = EDGE_CURVE('',#13997,#13560,#13999,.T.); +#13997 = VERTEX_POINT('',#13998); +#13998 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#13999 = LINE('',#14000,#14001); +#14000 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#14001 = VECTOR('',#14002,1.); +#14002 = DIRECTION('',(0.,0.,1.)); +#14003 = ORIENTED_EDGE('',*,*,#14004,.T.); +#14004 = EDGE_CURVE('',#13997,#13952,#14005,.T.); +#14005 = LINE('',#14006,#14007); +#14006 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#14007 = VECTOR('',#14008,1.); +#14008 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14009 = ORIENTED_EDGE('',*,*,#13959,.T.); +#14010 = ORIENTED_EDGE('',*,*,#13567,.F.); +#14011 = PLANE('',#14012); +#14012 = AXIS2_PLACEMENT_3D('',#14013,#14014,#14015); +#14013 = CARTESIAN_POINT('',(2.82,-0.32,-0.9)); +#14014 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14015 = DIRECTION('',(0.,-0.,1.)); +#14016 = ADVANCED_FACE('',(#14017),#14067,.F.); +#14017 = FACE_BOUND('',#14018,.F.); +#14018 = EDGE_LOOP('',(#14019,#14029,#14037,#14043,#14044,#14045,#14053, + #14061)); +#14019 = ORIENTED_EDGE('',*,*,#14020,.T.); +#14020 = EDGE_CURVE('',#14021,#14023,#14025,.T.); +#14021 = VERTEX_POINT('',#14022); +#14022 = CARTESIAN_POINT('',(2.82,0.351578947368,-3.2)); +#14023 = VERTEX_POINT('',#14024); +#14024 = CARTESIAN_POINT('',(2.82,-0.288421052632,-3.2)); +#14025 = LINE('',#14026,#14027); +#14026 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#14027 = VECTOR('',#14028,1.); +#14028 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14029 = ORIENTED_EDGE('',*,*,#14030,.T.); +#14030 = EDGE_CURVE('',#14023,#14031,#14033,.T.); +#14031 = VERTEX_POINT('',#14032); +#14032 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14033 = LINE('',#14034,#14035); +#14034 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#14035 = VECTOR('',#14036,1.); +#14036 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14037 = ORIENTED_EDGE('',*,*,#14038,.T.); +#14038 = EDGE_CURVE('',#14031,#13997,#14039,.T.); +#14039 = LINE('',#14040,#14041); +#14040 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14041 = VECTOR('',#14042,1.); +#14042 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14043 = ORIENTED_EDGE('',*,*,#13996,.T.); +#14044 = ORIENTED_EDGE('',*,*,#13559,.F.); +#14045 = ORIENTED_EDGE('',*,*,#14046,.T.); +#14046 = EDGE_CURVE('',#13552,#14047,#14049,.T.); +#14047 = VERTEX_POINT('',#14048); +#14048 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14049 = LINE('',#14050,#14051); +#14050 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#14051 = VECTOR('',#14052,1.); +#14052 = DIRECTION('',(-0.,0.,-1.)); +#14053 = ORIENTED_EDGE('',*,*,#14054,.T.); +#14054 = EDGE_CURVE('',#14047,#14055,#14057,.T.); +#14055 = VERTEX_POINT('',#14056); +#14056 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14057 = LINE('',#14058,#14059); +#14058 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14059 = VECTOR('',#14060,1.); +#14060 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14061 = ORIENTED_EDGE('',*,*,#14062,.T.); +#14062 = EDGE_CURVE('',#14055,#14021,#14063,.T.); +#14063 = LINE('',#14064,#14065); +#14064 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14065 = VECTOR('',#14066,1.); +#14066 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14067 = PLANE('',#14068); +#14068 = AXIS2_PLACEMENT_3D('',#14069,#14070,#14071); +#14069 = CARTESIAN_POINT('',(2.82,3.65940088399E-02,1.522832428212)); +#14070 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14071 = DIRECTION('',(0.,0.,1.)); +#14072 = ADVANCED_FACE('',(#14073),#14084,.F.); +#14073 = FACE_BOUND('',#14074,.F.); +#14074 = EDGE_LOOP('',(#14075,#14076,#14077,#14078)); +#14075 = ORIENTED_EDGE('',*,*,#14046,.F.); +#14076 = ORIENTED_EDGE('',*,*,#13551,.F.); +#14077 = ORIENTED_EDGE('',*,*,#13966,.T.); +#14078 = ORIENTED_EDGE('',*,*,#14079,.F.); +#14079 = EDGE_CURVE('',#14047,#13967,#14080,.T.); +#14080 = LINE('',#14081,#14082); +#14081 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14082 = VECTOR('',#14083,1.); +#14083 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14084 = PLANE('',#14085); +#14085 = AXIS2_PLACEMENT_3D('',#14086,#14087,#14088); +#14086 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#14087 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14088 = DIRECTION('',(-0.,0.,-1.)); +#14089 = ADVANCED_FACE('',(#14090),#14115,.F.); +#14090 = FACE_BOUND('',#14091,.T.); +#14091 = EDGE_LOOP('',(#14092,#14100,#14108,#14114)); +#14092 = ORIENTED_EDGE('',*,*,#14093,.F.); +#14093 = EDGE_CURVE('',#14094,#13583,#14096,.T.); +#14094 = VERTEX_POINT('',#14095); +#14095 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#14096 = LINE('',#14097,#14098); +#14097 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#14098 = VECTOR('',#14099,1.); +#14099 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14100 = ORIENTED_EDGE('',*,*,#14101,.T.); +#14101 = EDGE_CURVE('',#14094,#14102,#14104,.T.); +#14102 = VERTEX_POINT('',#14103); +#14103 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#14104 = LINE('',#14105,#14106); +#14105 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#14106 = VECTOR('',#14107,1.); +#14107 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14108 = ORIENTED_EDGE('',*,*,#14109,.T.); +#14109 = EDGE_CURVE('',#14102,#13591,#14110,.T.); +#14110 = LINE('',#14111,#14112); +#14111 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#14112 = VECTOR('',#14113,1.); +#14113 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14114 = ORIENTED_EDGE('',*,*,#13590,.F.); +#14115 = PLANE('',#14116); +#14116 = AXIS2_PLACEMENT_3D('',#14117,#14118,#14119); +#14117 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#14118 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14119 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14120 = ADVANCED_FACE('',(#14121),#14139,.T.); +#14121 = FACE_BOUND('',#14122,.F.); +#14122 = EDGE_LOOP('',(#14123,#14131,#14132,#14133)); +#14123 = ORIENTED_EDGE('',*,*,#14124,.T.); +#14124 = EDGE_CURVE('',#14125,#13613,#14127,.T.); +#14125 = VERTEX_POINT('',#14126); +#14126 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#14127 = LINE('',#14128,#14129); +#14128 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#14129 = VECTOR('',#14130,1.); +#14130 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#14131 = ORIENTED_EDGE('',*,*,#13622,.T.); +#14132 = ORIENTED_EDGE('',*,*,#14093,.F.); +#14133 = ORIENTED_EDGE('',*,*,#14134,.F.); +#14134 = EDGE_CURVE('',#14125,#14094,#14135,.T.); +#14135 = LINE('',#14136,#14137); +#14136 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#14137 = VECTOR('',#14138,1.); +#14138 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14139 = PLANE('',#14140); +#14140 = AXIS2_PLACEMENT_3D('',#14141,#14142,#14143); +#14141 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#14142 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14143 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14144 = ADVANCED_FACE('',(#14145),#14163,.T.); +#14145 = FACE_BOUND('',#14146,.F.); +#14146 = EDGE_LOOP('',(#14147,#14148,#14156,#14162)); +#14147 = ORIENTED_EDGE('',*,*,#14124,.F.); +#14148 = ORIENTED_EDGE('',*,*,#14149,.T.); +#14149 = EDGE_CURVE('',#14125,#14150,#14152,.T.); +#14150 = VERTEX_POINT('',#14151); +#14151 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#14152 = LINE('',#14153,#14154); +#14153 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#14154 = VECTOR('',#14155,1.); +#14155 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14156 = ORIENTED_EDGE('',*,*,#14157,.T.); +#14157 = EDGE_CURVE('',#14150,#13639,#14158,.T.); +#14158 = LINE('',#14159,#14160); +#14159 = CARTESIAN_POINT('',(0.146666666667,0.146666666667, + 6.473333333333)); +#14160 = VECTOR('',#14161,1.); +#14161 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14162 = ORIENTED_EDGE('',*,*,#13638,.F.); +#14163 = PLANE('',#14164); +#14164 = AXIS2_PLACEMENT_3D('',#14165,#14166,#14167); +#14165 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#14166 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14167 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14168 = ADVANCED_FACE('',(#14169),#14180,.T.); +#14169 = FACE_BOUND('',#14170,.F.); +#14170 = EDGE_LOOP('',(#14171,#14172,#14178,#14179)); +#14171 = ORIENTED_EDGE('',*,*,#14157,.F.); +#14172 = ORIENTED_EDGE('',*,*,#14173,.T.); +#14173 = EDGE_CURVE('',#14150,#14102,#14174,.T.); +#14174 = LINE('',#14175,#14176); +#14175 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#14176 = VECTOR('',#14177,1.); +#14177 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14178 = ORIENTED_EDGE('',*,*,#14109,.T.); +#14179 = ORIENTED_EDGE('',*,*,#13661,.F.); +#14180 = PLANE('',#14181); +#14181 = AXIS2_PLACEMENT_3D('',#14182,#14183,#14184); +#14182 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#14183 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14184 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14185 = ADVANCED_FACE('',(#14186),#14211,.F.); +#14186 = FACE_BOUND('',#14187,.T.); +#14187 = EDGE_LOOP('',(#14188,#14196,#14204,#14210)); +#14188 = ORIENTED_EDGE('',*,*,#14189,.F.); +#14189 = EDGE_CURVE('',#14190,#13679,#14192,.T.); +#14190 = VERTEX_POINT('',#14191); +#14191 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#14192 = LINE('',#14193,#14194); +#14193 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#14194 = VECTOR('',#14195,1.); +#14195 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14196 = ORIENTED_EDGE('',*,*,#14197,.T.); +#14197 = EDGE_CURVE('',#14190,#14198,#14200,.T.); +#14198 = VERTEX_POINT('',#14199); +#14199 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#14200 = LINE('',#14201,#14202); +#14201 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#14202 = VECTOR('',#14203,1.); +#14203 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14204 = ORIENTED_EDGE('',*,*,#14205,.T.); +#14205 = EDGE_CURVE('',#14198,#13687,#14206,.T.); +#14206 = LINE('',#14207,#14208); +#14207 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#14208 = VECTOR('',#14209,1.); +#14209 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14210 = ORIENTED_EDGE('',*,*,#13686,.F.); +#14211 = PLANE('',#14212); +#14212 = AXIS2_PLACEMENT_3D('',#14213,#14214,#14215); +#14213 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#14214 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14215 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14216 = ADVANCED_FACE('',(#14217),#14235,.T.); +#14217 = FACE_BOUND('',#14218,.F.); +#14218 = EDGE_LOOP('',(#14219,#14227,#14228,#14229)); +#14219 = ORIENTED_EDGE('',*,*,#14220,.T.); +#14220 = EDGE_CURVE('',#14221,#13709,#14223,.T.); +#14221 = VERTEX_POINT('',#14222); +#14222 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#14223 = LINE('',#14224,#14225); +#14224 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#14225 = VECTOR('',#14226,1.); +#14226 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#14227 = ORIENTED_EDGE('',*,*,#13718,.T.); +#14228 = ORIENTED_EDGE('',*,*,#14189,.F.); +#14229 = ORIENTED_EDGE('',*,*,#14230,.F.); +#14230 = EDGE_CURVE('',#14221,#14190,#14231,.T.); +#14231 = LINE('',#14232,#14233); +#14232 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#14233 = VECTOR('',#14234,1.); +#14234 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14235 = PLANE('',#14236); +#14236 = AXIS2_PLACEMENT_3D('',#14237,#14238,#14239); +#14237 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#14238 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14239 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14240 = ADVANCED_FACE('',(#14241),#14259,.T.); +#14241 = FACE_BOUND('',#14242,.F.); +#14242 = EDGE_LOOP('',(#14243,#14244,#14252,#14258)); +#14243 = ORIENTED_EDGE('',*,*,#14220,.F.); +#14244 = ORIENTED_EDGE('',*,*,#14245,.T.); +#14245 = EDGE_CURVE('',#14221,#14246,#14248,.T.); +#14246 = VERTEX_POINT('',#14247); +#14247 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#14248 = LINE('',#14249,#14250); +#14249 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#14250 = VECTOR('',#14251,1.); +#14251 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14252 = ORIENTED_EDGE('',*,*,#14253,.T.); +#14253 = EDGE_CURVE('',#14246,#13735,#14254,.T.); +#14254 = LINE('',#14255,#14256); +#14255 = CARTESIAN_POINT('',(2.646666666667,0.146666666667, + 6.473333333333)); +#14256 = VECTOR('',#14257,1.); +#14257 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14258 = ORIENTED_EDGE('',*,*,#13734,.F.); +#14259 = PLANE('',#14260); +#14260 = AXIS2_PLACEMENT_3D('',#14261,#14262,#14263); +#14261 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#14262 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14263 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14264 = ADVANCED_FACE('',(#14265),#14276,.T.); +#14265 = FACE_BOUND('',#14266,.F.); +#14266 = EDGE_LOOP('',(#14267,#14268,#14274,#14275)); +#14267 = ORIENTED_EDGE('',*,*,#14253,.F.); +#14268 = ORIENTED_EDGE('',*,*,#14269,.T.); +#14269 = EDGE_CURVE('',#14246,#14198,#14270,.T.); +#14270 = LINE('',#14271,#14272); +#14271 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#14272 = VECTOR('',#14273,1.); +#14273 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14274 = ORIENTED_EDGE('',*,*,#14205,.T.); +#14275 = ORIENTED_EDGE('',*,*,#13757,.F.); +#14276 = PLANE('',#14277); +#14277 = AXIS2_PLACEMENT_3D('',#14278,#14279,#14280); +#14278 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#14279 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14280 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14281 = ADVANCED_FACE('',(#14282),#14323,.F.); +#14282 = FACE_BOUND('',#14283,.T.); +#14283 = EDGE_LOOP('',(#14284,#14294,#14300,#14301,#14309,#14317)); +#14284 = ORIENTED_EDGE('',*,*,#14285,.T.); +#14285 = EDGE_CURVE('',#14286,#14288,#14290,.T.); +#14286 = VERTEX_POINT('',#14287); +#14287 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#14288 = VERTEX_POINT('',#14289); +#14289 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#14290 = LINE('',#14291,#14292); +#14291 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#14292 = VECTOR('',#14293,1.); +#14293 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#14294 = ORIENTED_EDGE('',*,*,#14295,.T.); +#14295 = EDGE_CURVE('',#14288,#13776,#14296,.T.); +#14296 = LINE('',#14297,#14298); +#14297 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#14298 = VECTOR('',#14299,1.); +#14299 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14300 = ORIENTED_EDGE('',*,*,#13773,.F.); +#14301 = ORIENTED_EDGE('',*,*,#14302,.F.); +#14302 = EDGE_CURVE('',#14303,#13774,#14305,.T.); +#14303 = VERTEX_POINT('',#14304); +#14304 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#14305 = LINE('',#14306,#14307); +#14306 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#14307 = VECTOR('',#14308,1.); +#14308 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14309 = ORIENTED_EDGE('',*,*,#14310,.F.); +#14310 = EDGE_CURVE('',#14311,#14303,#14313,.T.); +#14311 = VERTEX_POINT('',#14312); +#14312 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#14313 = LINE('',#14314,#14315); +#14314 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#14315 = VECTOR('',#14316,1.); +#14316 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#14317 = ORIENTED_EDGE('',*,*,#14318,.T.); +#14318 = EDGE_CURVE('',#14311,#14286,#14319,.T.); +#14319 = LINE('',#14320,#14321); +#14320 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#14321 = VECTOR('',#14322,1.); +#14322 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14323 = PLANE('',#14324); +#14324 = AXIS2_PLACEMENT_3D('',#14325,#14326,#14327); +#14325 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#14326 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14327 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#14328 = ADVANCED_FACE('',(#14329),#14354,.F.); +#14329 = FACE_BOUND('',#14330,.F.); +#14330 = EDGE_LOOP('',(#14331,#14332,#14338,#14339,#14340,#14348)); +#14331 = ORIENTED_EDGE('',*,*,#13902,.F.); +#14332 = ORIENTED_EDGE('',*,*,#14333,.T.); +#14333 = EDGE_CURVE('',#13895,#13815,#14334,.T.); +#14334 = LINE('',#14335,#14336); +#14335 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#14336 = VECTOR('',#14337,1.); +#14337 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14338 = ORIENTED_EDGE('',*,*,#13822,.T.); +#14339 = ORIENTED_EDGE('',*,*,#14302,.F.); +#14340 = ORIENTED_EDGE('',*,*,#14341,.F.); +#14341 = EDGE_CURVE('',#14342,#14303,#14344,.T.); +#14342 = VERTEX_POINT('',#14343); +#14343 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#14344 = LINE('',#14345,#14346); +#14345 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#14346 = VECTOR('',#14347,1.); +#14347 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14348 = ORIENTED_EDGE('',*,*,#14349,.T.); +#14349 = EDGE_CURVE('',#14342,#13861,#14350,.T.); +#14350 = LINE('',#14351,#14352); +#14351 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#14352 = VECTOR('',#14353,1.); +#14353 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14354 = PLANE('',#14355); +#14355 = AXIS2_PLACEMENT_3D('',#14356,#14357,#14358); +#14356 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#14357 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#14358 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14359 = ADVANCED_FACE('',(#14360),#14366,.F.); +#14360 = FACE_BOUND('',#14361,.F.); +#14361 = EDGE_LOOP('',(#14362,#14363,#14364,#14365)); +#14362 = ORIENTED_EDGE('',*,*,#13919,.T.); +#14363 = ORIENTED_EDGE('',*,*,#13814,.T.); +#14364 = ORIENTED_EDGE('',*,*,#14333,.F.); +#14365 = ORIENTED_EDGE('',*,*,#13894,.F.); +#14366 = PLANE('',#14367); +#14367 = AXIS2_PLACEMENT_3D('',#14368,#14369,#14370); +#14368 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#14369 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#14370 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14371 = ADVANCED_FACE('',(#14372),#14383,.F.); +#14372 = FACE_BOUND('',#14373,.F.); +#14373 = EDGE_LOOP('',(#14374,#14380,#14381,#14382)); +#14374 = ORIENTED_EDGE('',*,*,#14375,.T.); +#14375 = EDGE_CURVE('',#13871,#13784,#14376,.T.); +#14376 = LINE('',#14377,#14378); +#14377 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#14378 = VECTOR('',#14379,1.); +#14379 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14380 = ORIENTED_EDGE('',*,*,#13791,.T.); +#14381 = ORIENTED_EDGE('',*,*,#13844,.F.); +#14382 = ORIENTED_EDGE('',*,*,#13878,.F.); +#14383 = PLANE('',#14384); +#14384 = AXIS2_PLACEMENT_3D('',#14385,#14386,#14387); +#14385 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#14386 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#14387 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14388 = ADVANCED_FACE('',(#14389),#14409,.F.); +#14389 = FACE_BOUND('',#14390,.F.); +#14390 = EDGE_LOOP('',(#14391,#14392,#14400,#14406,#14407,#14408)); +#14391 = ORIENTED_EDGE('',*,*,#13870,.F.); +#14392 = ORIENTED_EDGE('',*,*,#14393,.F.); +#14393 = EDGE_CURVE('',#14394,#13863,#14396,.T.); +#14394 = VERTEX_POINT('',#14395); +#14395 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#14396 = LINE('',#14397,#14398); +#14397 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#14398 = VECTOR('',#14399,1.); +#14399 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14400 = ORIENTED_EDGE('',*,*,#14401,.T.); +#14401 = EDGE_CURVE('',#14394,#14288,#14402,.T.); +#14402 = LINE('',#14403,#14404); +#14403 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#14404 = VECTOR('',#14405,1.); +#14405 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14406 = ORIENTED_EDGE('',*,*,#14295,.T.); +#14407 = ORIENTED_EDGE('',*,*,#13783,.T.); +#14408 = ORIENTED_EDGE('',*,*,#14375,.F.); +#14409 = PLANE('',#14410); +#14410 = AXIS2_PLACEMENT_3D('',#14411,#14412,#14413); +#14411 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#14412 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#14413 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14414 = ADVANCED_FACE('',(#14415),#14442,.T.); +#14415 = FACE_BOUND('',#14416,.F.); +#14416 = EDGE_LOOP('',(#14417,#14425,#14426,#14427,#14428,#14436)); +#14417 = ORIENTED_EDGE('',*,*,#14418,.T.); +#14418 = EDGE_CURVE('',#14419,#14394,#14421,.T.); +#14419 = VERTEX_POINT('',#14420); +#14420 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#14421 = LINE('',#14422,#14423); +#14422 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#14423 = VECTOR('',#14424,1.); +#14424 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#14425 = ORIENTED_EDGE('',*,*,#14393,.T.); +#14426 = ORIENTED_EDGE('',*,*,#13860,.F.); +#14427 = ORIENTED_EDGE('',*,*,#14349,.F.); +#14428 = ORIENTED_EDGE('',*,*,#14429,.F.); +#14429 = EDGE_CURVE('',#14430,#14342,#14432,.T.); +#14430 = VERTEX_POINT('',#14431); +#14431 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#14432 = LINE('',#14433,#14434); +#14433 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225 + )); +#14434 = VECTOR('',#14435,1.); +#14435 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#14436 = ORIENTED_EDGE('',*,*,#14437,.T.); +#14437 = EDGE_CURVE('',#14430,#14419,#14438,.T.); +#14438 = LINE('',#14439,#14440); +#14439 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#14440 = VECTOR('',#14441,1.); +#14441 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14442 = PLANE('',#14443); +#14443 = AXIS2_PLACEMENT_3D('',#14444,#14445,#14446); +#14444 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#14445 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14446 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#14447 = ADVANCED_FACE('',(#14448),#14489,.F.); +#14448 = FACE_BOUND('',#14449,.T.); +#14449 = EDGE_LOOP('',(#14450,#14460,#14466,#14467,#14475,#14483)); +#14450 = ORIENTED_EDGE('',*,*,#14451,.T.); +#14451 = EDGE_CURVE('',#14452,#14454,#14456,.T.); +#14452 = VERTEX_POINT('',#14453); +#14453 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#14454 = VERTEX_POINT('',#14455); +#14455 = CARTESIAN_POINT('',(2.182447406934,-0.288807485305, + -3.202447406934)); +#14456 = LINE('',#14457,#14458); +#14457 = CARTESIAN_POINT('',(2.461511443392,-5.034896900541E-02, + -3.481511443392)); +#14458 = VECTOR('',#14459,1.); +#14459 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#14460 = ORIENTED_EDGE('',*,*,#14461,.T.); +#14461 = EDGE_CURVE('',#14454,#13936,#14462,.T.); +#14462 = LINE('',#14463,#14464); +#14463 = CARTESIAN_POINT('',(2.414309165527,-0.325417236662, + -3.434309165527)); +#14464 = VECTOR('',#14465,1.); +#14465 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14466 = ORIENTED_EDGE('',*,*,#13933,.F.); +#14467 = ORIENTED_EDGE('',*,*,#14468,.F.); +#14468 = EDGE_CURVE('',#14469,#13934,#14471,.T.); +#14469 = VERTEX_POINT('',#14470); +#14470 = CARTESIAN_POINT('',(2.182447406934,0.351192514695, + -3.202447406934)); +#14471 = LINE('',#14472,#14473); +#14472 = CARTESIAN_POINT('',(1.958413132695,0.386566347469, + -2.978413132695)); +#14473 = VECTOR('',#14474,1.); +#14474 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#14475 = ORIENTED_EDGE('',*,*,#14476,.F.); +#14476 = EDGE_CURVE('',#14477,#14469,#14479,.T.); +#14477 = VERTEX_POINT('',#14478); +#14478 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#14479 = LINE('',#14480,#14481); +#14480 = CARTESIAN_POINT('',(2.346150901889,0.159613036666, + -3.366150901889)); +#14481 = VECTOR('',#14482,1.); +#14482 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#14483 = ORIENTED_EDGE('',*,*,#14484,.T.); +#14484 = EDGE_CURVE('',#14477,#14452,#14485,.T.); +#14485 = LINE('',#14486,#14487); +#14486 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#14487 = VECTOR('',#14488,1.); +#14488 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14489 = PLANE('',#14490); +#14490 = AXIS2_PLACEMENT_3D('',#14491,#14492,#14493); +#14491 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#14492 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14493 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#14494 = ADVANCED_FACE('',(#14495),#14520,.F.); +#14495 = FACE_BOUND('',#14496,.F.); +#14496 = EDGE_LOOP('',(#14497,#14498,#14504,#14505,#14506,#14514)); +#14497 = ORIENTED_EDGE('',*,*,#14062,.F.); +#14498 = ORIENTED_EDGE('',*,*,#14499,.T.); +#14499 = EDGE_CURVE('',#14055,#13975,#14500,.T.); +#14500 = LINE('',#14501,#14502); +#14501 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14502 = VECTOR('',#14503,1.); +#14503 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14504 = ORIENTED_EDGE('',*,*,#13982,.T.); +#14505 = ORIENTED_EDGE('',*,*,#14468,.F.); +#14506 = ORIENTED_EDGE('',*,*,#14507,.F.); +#14507 = EDGE_CURVE('',#14508,#14469,#14510,.T.); +#14508 = VERTEX_POINT('',#14509); +#14509 = CARTESIAN_POINT('',(2.817552593066,0.351192514695, + -3.202447406934)); +#14510 = LINE('',#14511,#14512); +#14511 = CARTESIAN_POINT('',(2.82,0.351192514695,-3.202447406934)); +#14512 = VECTOR('',#14513,1.); +#14513 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14514 = ORIENTED_EDGE('',*,*,#14515,.T.); +#14515 = EDGE_CURVE('',#14508,#14021,#14516,.T.); +#14516 = LINE('',#14517,#14518); +#14517 = CARTESIAN_POINT('',(3.199616963064,0.411518467852, + -2.820383036936)); +#14518 = VECTOR('',#14519,1.); +#14519 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14520 = PLANE('',#14521); +#14521 = AXIS2_PLACEMENT_3D('',#14522,#14523,#14524); +#14522 = CARTESIAN_POINT('',(2.82,0.62,-1.5)); +#14523 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#14524 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14525 = ADVANCED_FACE('',(#14526),#14532,.F.); +#14526 = FACE_BOUND('',#14527,.F.); +#14527 = EDGE_LOOP('',(#14528,#14529,#14530,#14531)); +#14528 = ORIENTED_EDGE('',*,*,#14079,.T.); +#14529 = ORIENTED_EDGE('',*,*,#13974,.T.); +#14530 = ORIENTED_EDGE('',*,*,#14499,.F.); +#14531 = ORIENTED_EDGE('',*,*,#14054,.F.); +#14532 = PLANE('',#14533); +#14533 = AXIS2_PLACEMENT_3D('',#14534,#14535,#14536); +#14534 = CARTESIAN_POINT('',(2.82,0.32,-0.9)); +#14535 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#14536 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14537 = ADVANCED_FACE('',(#14538),#14549,.F.); +#14538 = FACE_BOUND('',#14539,.F.); +#14539 = EDGE_LOOP('',(#14540,#14546,#14547,#14548)); +#14540 = ORIENTED_EDGE('',*,*,#14541,.T.); +#14541 = EDGE_CURVE('',#14031,#13944,#14542,.T.); +#14542 = LINE('',#14543,#14544); +#14543 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14544 = VECTOR('',#14545,1.); +#14545 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14546 = ORIENTED_EDGE('',*,*,#13951,.T.); +#14547 = ORIENTED_EDGE('',*,*,#14004,.F.); +#14548 = ORIENTED_EDGE('',*,*,#14038,.F.); +#14549 = PLANE('',#14550); +#14550 = AXIS2_PLACEMENT_3D('',#14551,#14552,#14553); +#14551 = CARTESIAN_POINT('',(2.82,-2.E-02,-1.5)); +#14552 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#14553 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14554 = ADVANCED_FACE('',(#14555),#14575,.F.); +#14555 = FACE_BOUND('',#14556,.F.); +#14556 = EDGE_LOOP('',(#14557,#14558,#14566,#14572,#14573,#14574)); +#14557 = ORIENTED_EDGE('',*,*,#14030,.F.); +#14558 = ORIENTED_EDGE('',*,*,#14559,.F.); +#14559 = EDGE_CURVE('',#14560,#14023,#14562,.T.); +#14560 = VERTEX_POINT('',#14561); +#14561 = CARTESIAN_POINT('',(2.817552593066,-0.288807485305, + -3.202447406934)); +#14562 = LINE('',#14563,#14564); +#14563 = CARTESIAN_POINT('',(2.743720930233,-0.300465116279, + -3.276279069767)); +#14564 = VECTOR('',#14565,1.); +#14565 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#14566 = ORIENTED_EDGE('',*,*,#14567,.T.); +#14567 = EDGE_CURVE('',#14560,#14454,#14568,.T.); +#14568 = LINE('',#14569,#14570); +#14569 = CARTESIAN_POINT('',(2.82,-0.288807485305,-3.202447406934)); +#14570 = VECTOR('',#14571,1.); +#14571 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14572 = ORIENTED_EDGE('',*,*,#14461,.T.); +#14573 = ORIENTED_EDGE('',*,*,#13943,.T.); +#14574 = ORIENTED_EDGE('',*,*,#14541,.F.); +#14575 = PLANE('',#14576); +#14576 = AXIS2_PLACEMENT_3D('',#14577,#14578,#14579); +#14577 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#14578 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#14579 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14580 = ADVANCED_FACE('',(#14581),#14608,.T.); +#14581 = FACE_BOUND('',#14582,.F.); +#14582 = EDGE_LOOP('',(#14583,#14591,#14592,#14593,#14594,#14602)); +#14583 = ORIENTED_EDGE('',*,*,#14584,.T.); +#14584 = EDGE_CURVE('',#14585,#14560,#14587,.T.); +#14585 = VERTEX_POINT('',#14586); +#14586 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#14587 = LINE('',#14588,#14589); +#14588 = CARTESIAN_POINT('',(2.655697812072,-0.150503562587, + -3.364302187928)); +#14589 = VECTOR('',#14590,1.); +#14590 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#14591 = ORIENTED_EDGE('',*,*,#14559,.T.); +#14592 = ORIENTED_EDGE('',*,*,#14020,.F.); +#14593 = ORIENTED_EDGE('',*,*,#14515,.F.); +#14594 = ORIENTED_EDGE('',*,*,#14595,.F.); +#14595 = EDGE_CURVE('',#14596,#14508,#14598,.T.); +#14596 = VERTEX_POINT('',#14597); +#14597 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#14598 = LINE('',#14599,#14600); +#14599 = CARTESIAN_POINT('',(2.74881689775,0.270752273427,-3.27118310225 + )); +#14600 = VECTOR('',#14601,1.); +#14601 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#14602 = ORIENTED_EDGE('',*,*,#14603,.T.); +#14603 = EDGE_CURVE('',#14596,#14585,#14604,.T.); +#14604 = LINE('',#14605,#14606); +#14605 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#14606 = VECTOR('',#14607,1.); +#14607 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14608 = PLANE('',#14609); +#14609 = AXIS2_PLACEMENT_3D('',#14610,#14611,#14612); +#14610 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#14611 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14612 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#14613 = ADVANCED_FACE('',(#14614),#14620,.F.); +#14614 = FACE_BOUND('',#14615,.F.); +#14615 = EDGE_LOOP('',(#14616,#14617,#14618,#14619)); +#14616 = ORIENTED_EDGE('',*,*,#14101,.T.); +#14617 = ORIENTED_EDGE('',*,*,#14173,.F.); +#14618 = ORIENTED_EDGE('',*,*,#14149,.F.); +#14619 = ORIENTED_EDGE('',*,*,#14134,.T.); +#14620 = PLANE('',#14621); +#14621 = AXIS2_PLACEMENT_3D('',#14622,#14623,#14624); +#14622 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#14623 = DIRECTION('',(-0.,0.,-1.)); +#14624 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14625 = ADVANCED_FACE('',(#14626),#14632,.F.); +#14626 = FACE_BOUND('',#14627,.F.); +#14627 = EDGE_LOOP('',(#14628,#14629,#14630,#14631)); +#14628 = ORIENTED_EDGE('',*,*,#14197,.T.); +#14629 = ORIENTED_EDGE('',*,*,#14269,.F.); +#14630 = ORIENTED_EDGE('',*,*,#14245,.F.); +#14631 = ORIENTED_EDGE('',*,*,#14230,.T.); +#14632 = PLANE('',#14633); +#14633 = AXIS2_PLACEMENT_3D('',#14634,#14635,#14636); +#14634 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#14635 = DIRECTION('',(-0.,0.,-1.)); +#14636 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14637 = ADVANCED_FACE('',(#14638),#14649,.T.); +#14638 = FACE_BOUND('',#14639,.F.); +#14639 = EDGE_LOOP('',(#14640,#14641,#14647,#14648)); +#14640 = ORIENTED_EDGE('',*,*,#14418,.F.); +#14641 = ORIENTED_EDGE('',*,*,#14642,.T.); +#14642 = EDGE_CURVE('',#14419,#14286,#14643,.T.); +#14643 = LINE('',#14644,#14645); +#14644 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#14645 = VECTOR('',#14646,1.); +#14646 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14647 = ORIENTED_EDGE('',*,*,#14285,.T.); +#14648 = ORIENTED_EDGE('',*,*,#14401,.F.); +#14649 = PLANE('',#14650); +#14650 = AXIS2_PLACEMENT_3D('',#14651,#14652,#14653); +#14651 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#14652 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#14653 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#14654 = ADVANCED_FACE('',(#14655),#14666,.F.); +#14655 = FACE_BOUND('',#14656,.F.); +#14656 = EDGE_LOOP('',(#14657,#14658,#14659,#14665)); +#14657 = ORIENTED_EDGE('',*,*,#14642,.F.); +#14658 = ORIENTED_EDGE('',*,*,#14437,.F.); +#14659 = ORIENTED_EDGE('',*,*,#14660,.T.); +#14660 = EDGE_CURVE('',#14430,#14311,#14661,.T.); +#14661 = LINE('',#14662,#14663); +#14662 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#14663 = VECTOR('',#14664,1.); +#14664 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14665 = ORIENTED_EDGE('',*,*,#14318,.T.); +#14666 = PLANE('',#14667); +#14667 = AXIS2_PLACEMENT_3D('',#14668,#14669,#14670); +#14668 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#14669 = DIRECTION('',(0.,0.,1.)); +#14670 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14671 = ADVANCED_FACE('',(#14672),#14678,.T.); +#14672 = FACE_BOUND('',#14673,.T.); +#14673 = EDGE_LOOP('',(#14674,#14675,#14676,#14677)); +#14674 = ORIENTED_EDGE('',*,*,#14429,.F.); +#14675 = ORIENTED_EDGE('',*,*,#14660,.T.); +#14676 = ORIENTED_EDGE('',*,*,#14310,.T.); +#14677 = ORIENTED_EDGE('',*,*,#14341,.F.); +#14678 = PLANE('',#14679); +#14679 = AXIS2_PLACEMENT_3D('',#14680,#14681,#14682); +#14680 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#14681 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#14682 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#14683 = ADVANCED_FACE('',(#14684),#14695,.T.); +#14684 = FACE_BOUND('',#14685,.F.); +#14685 = EDGE_LOOP('',(#14686,#14687,#14693,#14694)); +#14686 = ORIENTED_EDGE('',*,*,#14584,.F.); +#14687 = ORIENTED_EDGE('',*,*,#14688,.T.); +#14688 = EDGE_CURVE('',#14585,#14452,#14689,.T.); +#14689 = LINE('',#14690,#14691); +#14690 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#14691 = VECTOR('',#14692,1.); +#14692 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14693 = ORIENTED_EDGE('',*,*,#14451,.T.); +#14694 = ORIENTED_EDGE('',*,*,#14567,.F.); +#14695 = PLANE('',#14696); +#14696 = AXIS2_PLACEMENT_3D('',#14697,#14698,#14699); +#14697 = CARTESIAN_POINT('',(2.82,-0.204403742653,-3.301223703467)); +#14698 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#14699 = DIRECTION('',(1.,-1.224646799148E-16,-5.515485002448E-29)); +#14700 = ADVANCED_FACE('',(#14701),#14712,.F.); +#14701 = FACE_BOUND('',#14702,.F.); +#14702 = EDGE_LOOP('',(#14703,#14704,#14705,#14711)); +#14703 = ORIENTED_EDGE('',*,*,#14688,.F.); +#14704 = ORIENTED_EDGE('',*,*,#14603,.F.); +#14705 = ORIENTED_EDGE('',*,*,#14706,.T.); +#14706 = EDGE_CURVE('',#14596,#14477,#14707,.T.); +#14707 = LINE('',#14708,#14709); +#14708 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#14709 = VECTOR('',#14710,1.); +#14710 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14711 = ORIENTED_EDGE('',*,*,#14484,.T.); +#14712 = PLANE('',#14713); +#14713 = AXIS2_PLACEMENT_3D('',#14714,#14715,#14716); +#14714 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#14715 = DIRECTION('',(0.,0.,1.)); +#14716 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14717 = ADVANCED_FACE('',(#14718),#14724,.T.); +#14718 = FACE_BOUND('',#14719,.T.); +#14719 = EDGE_LOOP('',(#14720,#14721,#14722,#14723)); +#14720 = ORIENTED_EDGE('',*,*,#14595,.F.); +#14721 = ORIENTED_EDGE('',*,*,#14706,.T.); +#14722 = ORIENTED_EDGE('',*,*,#14476,.T.); +#14723 = ORIENTED_EDGE('',*,*,#14507,.F.); +#14724 = PLANE('',#14725); +#14725 = AXIS2_PLACEMENT_3D('',#14726,#14727,#14728); +#14726 = CARTESIAN_POINT('',(2.82,0.235596257347,-3.301223703467)); +#14727 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#14728 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#14729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#14733)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#14730,#14731,#14732)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#14730 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#14731 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#14732 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#14733 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#14730, + 'distance_accuracy_value','confusion accuracy'); +#14734 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#14735,#14737); +#14735 = ( REPRESENTATION_RELATIONSHIP('','',#12013,#11990) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#14736) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#14736 = ITEM_DEFINED_TRANSFORMATION('','',#11,#11991); +#14737 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #14738); +#14738 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','=>[0:1:1:13]','',#11985, + #12008,$); +#14739 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12010)); +#14740 = SHAPE_DEFINITION_REPRESENTATION(#14741,#14747); +#14741 = PRODUCT_DEFINITION_SHAPE('','',#14742); +#14742 = PRODUCT_DEFINITION('design','',#14743,#14746); +#14743 = PRODUCT_DEFINITION_FORMATION('','',#14744); +#14744 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#14745)); +#14745 = PRODUCT_CONTEXT('',#2,'mechanical'); +#14746 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#14747 = SHAPE_REPRESENTATION('',(#11,#14748),#14752); +#14748 = AXIS2_PLACEMENT_3D('',#14749,#14750,#14751); +#14749 = CARTESIAN_POINT('',(0.,0.,0.)); +#14750 = DIRECTION('',(0.,0.,1.)); +#14751 = DIRECTION('',(1.,0.,-0.)); +#14752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#14756)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#14753,#14754,#14755)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#14753 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#14754 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#14755 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#14756 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#14753, + 'distance_accuracy_value','confusion accuracy'); +#14757 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#14758,#14760); +#14758 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#14759) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#14759 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51); +#14760 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #14761); +#14761 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('17','Ccomp','',#5,#14742,$); +#14762 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#14744)); +#14763 = SHAPE_DEFINITION_REPRESENTATION(#14764,#14770); +#14764 = PRODUCT_DEFINITION_SHAPE('','',#14765); +#14765 = PRODUCT_DEFINITION('design','',#14766,#14769); +#14766 = PRODUCT_DEFINITION_FORMATION('','',#14767); +#14767 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#14768)); +#14768 = PRODUCT_CONTEXT('',#2,'mechanical'); +#14769 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#14770 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#14771),#15625); +#14771 = MANIFOLD_SOLID_BREP('',#14772); +#14772 = CLOSED_SHELL('',(#14773,#14849,#14880,#14905,#14930,#14954, + #14978,#15003,#15028,#15045,#15131,#15163,#15187,#15212,#15236, + #15261,#15285,#15310,#15327,#15413,#15444,#15469,#15494,#15518, + #15542,#15567,#15592,#15609)); +#14773 = ADVANCED_FACE('',(#14774),#14844,.F.); +#14774 = FACE_BOUND('',#14775,.F.); +#14775 = EDGE_LOOP('',(#14776,#14786,#14795,#14803,#14812,#14820,#14829, + #14837)); +#14776 = ORIENTED_EDGE('',*,*,#14777,.F.); +#14777 = EDGE_CURVE('',#14778,#14780,#14782,.T.); +#14778 = VERTEX_POINT('',#14779); +#14779 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#14780 = VERTEX_POINT('',#14781); +#14781 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#14782 = LINE('',#14783,#14784); +#14783 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14784 = VECTOR('',#14785,1.); +#14785 = DIRECTION('',(0.,0.,1.)); +#14786 = ORIENTED_EDGE('',*,*,#14787,.T.); +#14787 = EDGE_CURVE('',#14778,#14788,#14790,.T.); +#14788 = VERTEX_POINT('',#14789); +#14789 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#14790 = CIRCLE('',#14791,3.E-02); +#14791 = AXIS2_PLACEMENT_3D('',#14792,#14793,#14794); +#14792 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#14793 = DIRECTION('',(1.,0.,-0.)); +#14794 = DIRECTION('',(0.,0.,1.)); +#14795 = ORIENTED_EDGE('',*,*,#14796,.T.); +#14796 = EDGE_CURVE('',#14788,#14797,#14799,.T.); +#14797 = VERTEX_POINT('',#14798); +#14798 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#14799 = LINE('',#14800,#14801); +#14800 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14801 = VECTOR('',#14802,1.); +#14802 = DIRECTION('',(0.,1.,0.)); +#14803 = ORIENTED_EDGE('',*,*,#14804,.F.); +#14804 = EDGE_CURVE('',#14805,#14797,#14807,.T.); +#14805 = VERTEX_POINT('',#14806); +#14806 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#14807 = CIRCLE('',#14808,3.E-02); +#14808 = AXIS2_PLACEMENT_3D('',#14809,#14810,#14811); +#14809 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#14810 = DIRECTION('',(-1.,0.,0.)); +#14811 = DIRECTION('',(0.,0.,1.)); +#14812 = ORIENTED_EDGE('',*,*,#14813,.T.); +#14813 = EDGE_CURVE('',#14805,#14814,#14816,.T.); +#14814 = VERTEX_POINT('',#14815); +#14815 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#14816 = LINE('',#14817,#14818); +#14817 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#14818 = VECTOR('',#14819,1.); +#14819 = DIRECTION('',(0.,0.,1.)); +#14820 = ORIENTED_EDGE('',*,*,#14821,.T.); +#14821 = EDGE_CURVE('',#14814,#14822,#14824,.T.); +#14822 = VERTEX_POINT('',#14823); +#14823 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#14824 = CIRCLE('',#14825,3.E-02); +#14825 = AXIS2_PLACEMENT_3D('',#14826,#14827,#14828); +#14826 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#14827 = DIRECTION('',(1.,0.,-0.)); +#14828 = DIRECTION('',(0.,0.,1.)); +#14829 = ORIENTED_EDGE('',*,*,#14830,.F.); +#14830 = EDGE_CURVE('',#14831,#14822,#14833,.T.); +#14831 = VERTEX_POINT('',#14832); +#14832 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#14833 = LINE('',#14834,#14835); +#14834 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#14835 = VECTOR('',#14836,1.); +#14836 = DIRECTION('',(0.,1.,0.)); +#14837 = ORIENTED_EDGE('',*,*,#14838,.F.); +#14838 = EDGE_CURVE('',#14780,#14831,#14839,.T.); +#14839 = CIRCLE('',#14840,3.E-02); +#14840 = AXIS2_PLACEMENT_3D('',#14841,#14842,#14843); +#14841 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#14842 = DIRECTION('',(-1.,0.,0.)); +#14843 = DIRECTION('',(0.,0.,1.)); +#14844 = PLANE('',#14845); +#14845 = AXIS2_PLACEMENT_3D('',#14846,#14847,#14848); +#14846 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14847 = DIRECTION('',(1.,0.,0.)); +#14848 = DIRECTION('',(0.,0.,1.)); +#14849 = ADVANCED_FACE('',(#14850),#14875,.F.); +#14850 = FACE_BOUND('',#14851,.F.); +#14851 = EDGE_LOOP('',(#14852,#14862,#14868,#14869)); +#14852 = ORIENTED_EDGE('',*,*,#14853,.F.); +#14853 = EDGE_CURVE('',#14854,#14856,#14858,.T.); +#14854 = VERTEX_POINT('',#14855); +#14855 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#14856 = VERTEX_POINT('',#14857); +#14857 = CARTESIAN_POINT('',(-0.5,-0.4,0.77)); +#14858 = LINE('',#14859,#14860); +#14859 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#14860 = VECTOR('',#14861,1.); +#14861 = DIRECTION('',(0.,0.,1.)); +#14862 = ORIENTED_EDGE('',*,*,#14863,.F.); +#14863 = EDGE_CURVE('',#14778,#14854,#14864,.T.); +#14864 = LINE('',#14865,#14866); +#14865 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#14866 = VECTOR('',#14867,1.); +#14867 = DIRECTION('',(1.,0.,0.)); +#14868 = ORIENTED_EDGE('',*,*,#14777,.T.); +#14869 = ORIENTED_EDGE('',*,*,#14870,.T.); +#14870 = EDGE_CURVE('',#14780,#14856,#14871,.T.); +#14871 = LINE('',#14872,#14873); +#14872 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#14873 = VECTOR('',#14874,1.); +#14874 = DIRECTION('',(1.,0.,0.)); +#14875 = PLANE('',#14876); +#14876 = AXIS2_PLACEMENT_3D('',#14877,#14878,#14879); +#14877 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14878 = DIRECTION('',(0.,1.,0.)); +#14879 = DIRECTION('',(0.,-0.,1.)); +#14880 = ADVANCED_FACE('',(#14881),#14900,.T.); +#14881 = FACE_BOUND('',#14882,.T.); +#14882 = EDGE_LOOP('',(#14883,#14884,#14892,#14899)); +#14883 = ORIENTED_EDGE('',*,*,#14787,.T.); +#14884 = ORIENTED_EDGE('',*,*,#14885,.T.); +#14885 = EDGE_CURVE('',#14788,#14886,#14888,.T.); +#14886 = VERTEX_POINT('',#14887); +#14887 = CARTESIAN_POINT('',(-0.5,-0.37,0.)); +#14888 = LINE('',#14889,#14890); +#14889 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#14890 = VECTOR('',#14891,1.); +#14891 = DIRECTION('',(1.,0.,0.)); +#14892 = ORIENTED_EDGE('',*,*,#14893,.F.); +#14893 = EDGE_CURVE('',#14854,#14886,#14894,.T.); +#14894 = CIRCLE('',#14895,3.E-02); +#14895 = AXIS2_PLACEMENT_3D('',#14896,#14897,#14898); +#14896 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#14897 = DIRECTION('',(1.,0.,-0.)); +#14898 = DIRECTION('',(0.,0.,1.)); +#14899 = ORIENTED_EDGE('',*,*,#14863,.F.); +#14900 = CYLINDRICAL_SURFACE('',#14901,3.E-02); +#14901 = AXIS2_PLACEMENT_3D('',#14902,#14903,#14904); +#14902 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#14903 = DIRECTION('',(1.,0.,0.)); +#14904 = DIRECTION('',(0.,-1.,0.)); +#14905 = ADVANCED_FACE('',(#14906),#14925,.T.); +#14906 = FACE_BOUND('',#14907,.T.); +#14907 = EDGE_LOOP('',(#14908,#14909,#14918,#14924)); +#14908 = ORIENTED_EDGE('',*,*,#14870,.T.); +#14909 = ORIENTED_EDGE('',*,*,#14910,.T.); +#14910 = EDGE_CURVE('',#14856,#14911,#14913,.T.); +#14911 = VERTEX_POINT('',#14912); +#14912 = CARTESIAN_POINT('',(-0.5,-0.37,0.8)); +#14913 = CIRCLE('',#14914,3.E-02); +#14914 = AXIS2_PLACEMENT_3D('',#14915,#14916,#14917); +#14915 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#14916 = DIRECTION('',(-1.,0.,0.)); +#14917 = DIRECTION('',(0.,0.,1.)); +#14918 = ORIENTED_EDGE('',*,*,#14919,.F.); +#14919 = EDGE_CURVE('',#14831,#14911,#14920,.T.); +#14920 = LINE('',#14921,#14922); +#14921 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#14922 = VECTOR('',#14923,1.); +#14923 = DIRECTION('',(1.,0.,0.)); +#14924 = ORIENTED_EDGE('',*,*,#14838,.F.); +#14925 = CYLINDRICAL_SURFACE('',#14926,3.E-02); +#14926 = AXIS2_PLACEMENT_3D('',#14927,#14928,#14929); +#14927 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#14928 = DIRECTION('',(1.,0.,0.)); +#14929 = DIRECTION('',(0.,-1.,0.)); +#14930 = ADVANCED_FACE('',(#14931),#14949,.F.); +#14931 = FACE_BOUND('',#14932,.F.); +#14932 = EDGE_LOOP('',(#14933,#14934,#14935,#14943)); +#14933 = ORIENTED_EDGE('',*,*,#14796,.F.); +#14934 = ORIENTED_EDGE('',*,*,#14885,.T.); +#14935 = ORIENTED_EDGE('',*,*,#14936,.T.); +#14936 = EDGE_CURVE('',#14886,#14937,#14939,.T.); +#14937 = VERTEX_POINT('',#14938); +#14938 = CARTESIAN_POINT('',(-0.5,0.37,0.)); +#14939 = LINE('',#14940,#14941); +#14940 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#14941 = VECTOR('',#14942,1.); +#14942 = DIRECTION('',(0.,1.,0.)); +#14943 = ORIENTED_EDGE('',*,*,#14944,.F.); +#14944 = EDGE_CURVE('',#14797,#14937,#14945,.T.); +#14945 = LINE('',#14946,#14947); +#14946 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#14947 = VECTOR('',#14948,1.); +#14948 = DIRECTION('',(1.,0.,0.)); +#14949 = PLANE('',#14950); +#14950 = AXIS2_PLACEMENT_3D('',#14951,#14952,#14953); +#14951 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#14952 = DIRECTION('',(0.,0.,1.)); +#14953 = DIRECTION('',(1.,0.,-0.)); +#14954 = ADVANCED_FACE('',(#14955),#14973,.T.); +#14955 = FACE_BOUND('',#14956,.T.); +#14956 = EDGE_LOOP('',(#14957,#14958,#14959,#14967)); +#14957 = ORIENTED_EDGE('',*,*,#14830,.F.); +#14958 = ORIENTED_EDGE('',*,*,#14919,.T.); +#14959 = ORIENTED_EDGE('',*,*,#14960,.T.); +#14960 = EDGE_CURVE('',#14911,#14961,#14963,.T.); +#14961 = VERTEX_POINT('',#14962); +#14962 = CARTESIAN_POINT('',(-0.5,0.37,0.8)); +#14963 = LINE('',#14964,#14965); +#14964 = CARTESIAN_POINT('',(-0.5,-0.4,0.8)); +#14965 = VECTOR('',#14966,1.); +#14966 = DIRECTION('',(0.,1.,0.)); +#14967 = ORIENTED_EDGE('',*,*,#14968,.F.); +#14968 = EDGE_CURVE('',#14822,#14961,#14969,.T.); +#14969 = LINE('',#14970,#14971); +#14970 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#14971 = VECTOR('',#14972,1.); +#14972 = DIRECTION('',(1.,0.,0.)); +#14973 = PLANE('',#14974); +#14974 = AXIS2_PLACEMENT_3D('',#14975,#14976,#14977); +#14975 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#14976 = DIRECTION('',(0.,0.,1.)); +#14977 = DIRECTION('',(1.,0.,-0.)); +#14978 = ADVANCED_FACE('',(#14979),#14998,.T.); +#14979 = FACE_BOUND('',#14980,.T.); +#14980 = EDGE_LOOP('',(#14981,#14989,#14996,#14997)); +#14981 = ORIENTED_EDGE('',*,*,#14982,.T.); +#14982 = EDGE_CURVE('',#14805,#14983,#14985,.T.); +#14983 = VERTEX_POINT('',#14984); +#14984 = CARTESIAN_POINT('',(-0.5,0.4,3.E-02)); +#14985 = LINE('',#14986,#14987); +#14986 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#14987 = VECTOR('',#14988,1.); +#14988 = DIRECTION('',(1.,0.,0.)); +#14989 = ORIENTED_EDGE('',*,*,#14990,.T.); +#14990 = EDGE_CURVE('',#14983,#14937,#14991,.T.); +#14991 = CIRCLE('',#14992,3.E-02); +#14992 = AXIS2_PLACEMENT_3D('',#14993,#14994,#14995); +#14993 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#14994 = DIRECTION('',(-1.,0.,0.)); +#14995 = DIRECTION('',(0.,0.,1.)); +#14996 = ORIENTED_EDGE('',*,*,#14944,.F.); +#14997 = ORIENTED_EDGE('',*,*,#14804,.F.); +#14998 = CYLINDRICAL_SURFACE('',#14999,3.E-02); +#14999 = AXIS2_PLACEMENT_3D('',#15000,#15001,#15002); +#15000 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#15001 = DIRECTION('',(1.,0.,0.)); +#15002 = DIRECTION('',(-0.,1.,0.)); +#15003 = ADVANCED_FACE('',(#15004),#15023,.T.); +#15004 = FACE_BOUND('',#15005,.T.); +#15005 = EDGE_LOOP('',(#15006,#15007,#15008,#15017)); +#15006 = ORIENTED_EDGE('',*,*,#14821,.T.); +#15007 = ORIENTED_EDGE('',*,*,#14968,.T.); +#15008 = ORIENTED_EDGE('',*,*,#15009,.F.); +#15009 = EDGE_CURVE('',#15010,#14961,#15012,.T.); +#15010 = VERTEX_POINT('',#15011); +#15011 = CARTESIAN_POINT('',(-0.5,0.4,0.77)); +#15012 = CIRCLE('',#15013,3.E-02); +#15013 = AXIS2_PLACEMENT_3D('',#15014,#15015,#15016); +#15014 = CARTESIAN_POINT('',(-0.5,0.37,0.77)); +#15015 = DIRECTION('',(1.,0.,-0.)); +#15016 = DIRECTION('',(0.,0.,1.)); +#15017 = ORIENTED_EDGE('',*,*,#15018,.F.); +#15018 = EDGE_CURVE('',#14814,#15010,#15019,.T.); +#15019 = LINE('',#15020,#15021); +#15020 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#15021 = VECTOR('',#15022,1.); +#15022 = DIRECTION('',(1.,0.,0.)); +#15023 = CYLINDRICAL_SURFACE('',#15024,3.E-02); +#15024 = AXIS2_PLACEMENT_3D('',#15025,#15026,#15027); +#15025 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#15026 = DIRECTION('',(1.,0.,0.)); +#15027 = DIRECTION('',(-0.,1.,0.)); +#15028 = ADVANCED_FACE('',(#15029),#15040,.T.); +#15029 = FACE_BOUND('',#15030,.T.); +#15030 = EDGE_LOOP('',(#15031,#15037,#15038,#15039)); +#15031 = ORIENTED_EDGE('',*,*,#15032,.F.); +#15032 = EDGE_CURVE('',#14983,#15010,#15033,.T.); +#15033 = LINE('',#15034,#15035); +#15034 = CARTESIAN_POINT('',(-0.5,0.4,0.)); +#15035 = VECTOR('',#15036,1.); +#15036 = DIRECTION('',(0.,0.,1.)); +#15037 = ORIENTED_EDGE('',*,*,#14982,.F.); +#15038 = ORIENTED_EDGE('',*,*,#14813,.T.); +#15039 = ORIENTED_EDGE('',*,*,#15018,.T.); +#15040 = PLANE('',#15041); +#15041 = AXIS2_PLACEMENT_3D('',#15042,#15043,#15044); +#15042 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#15043 = DIRECTION('',(0.,1.,0.)); +#15044 = DIRECTION('',(0.,-0.,1.)); +#15045 = ADVANCED_FACE('',(#15046,#15056),#15126,.T.); +#15046 = FACE_BOUND('',#15047,.T.); +#15047 = EDGE_LOOP('',(#15048,#15049,#15050,#15051,#15052,#15053,#15054, + #15055)); +#15048 = ORIENTED_EDGE('',*,*,#14853,.F.); +#15049 = ORIENTED_EDGE('',*,*,#14893,.T.); +#15050 = ORIENTED_EDGE('',*,*,#14936,.T.); +#15051 = ORIENTED_EDGE('',*,*,#14990,.F.); +#15052 = ORIENTED_EDGE('',*,*,#15032,.T.); +#15053 = ORIENTED_EDGE('',*,*,#15009,.T.); +#15054 = ORIENTED_EDGE('',*,*,#14960,.F.); +#15055 = ORIENTED_EDGE('',*,*,#14910,.F.); +#15056 = FACE_BOUND('',#15057,.T.); +#15057 = EDGE_LOOP('',(#15058,#15069,#15077,#15086,#15094,#15103,#15111, + #15120)); +#15058 = ORIENTED_EDGE('',*,*,#15059,.F.); +#15059 = EDGE_CURVE('',#15060,#15062,#15064,.T.); +#15060 = VERTEX_POINT('',#15061); +#15061 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#15062 = VERTEX_POINT('',#15063); +#15063 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#15064 = CIRCLE('',#15065,3.E-02); +#15065 = AXIS2_PLACEMENT_3D('',#15066,#15067,#15068); +#15066 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#15067 = DIRECTION('',(1.,0.,-0.)); +#15068 = DIRECTION('',(0.,0.,1.)); +#15069 = ORIENTED_EDGE('',*,*,#15070,.T.); +#15070 = EDGE_CURVE('',#15060,#15071,#15073,.T.); +#15071 = VERTEX_POINT('',#15072); +#15072 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#15073 = LINE('',#15074,#15075); +#15074 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15075 = VECTOR('',#15076,1.); +#15076 = DIRECTION('',(0.,0.,1.)); +#15077 = ORIENTED_EDGE('',*,*,#15078,.T.); +#15078 = EDGE_CURVE('',#15071,#15079,#15081,.T.); +#15079 = VERTEX_POINT('',#15080); +#15080 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#15081 = CIRCLE('',#15082,3.E-02); +#15082 = AXIS2_PLACEMENT_3D('',#15083,#15084,#15085); +#15083 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#15084 = DIRECTION('',(-1.,0.,0.)); +#15085 = DIRECTION('',(0.,0.,1.)); +#15086 = ORIENTED_EDGE('',*,*,#15087,.T.); +#15087 = EDGE_CURVE('',#15079,#15088,#15090,.T.); +#15088 = VERTEX_POINT('',#15089); +#15089 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#15090 = LINE('',#15091,#15092); +#15091 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#15092 = VECTOR('',#15093,1.); +#15093 = DIRECTION('',(0.,1.,0.)); +#15094 = ORIENTED_EDGE('',*,*,#15095,.F.); +#15095 = EDGE_CURVE('',#15096,#15088,#15098,.T.); +#15096 = VERTEX_POINT('',#15097); +#15097 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#15098 = CIRCLE('',#15099,3.E-02); +#15099 = AXIS2_PLACEMENT_3D('',#15100,#15101,#15102); +#15100 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#15101 = DIRECTION('',(1.,0.,-0.)); +#15102 = DIRECTION('',(0.,0.,1.)); +#15103 = ORIENTED_EDGE('',*,*,#15104,.F.); +#15104 = EDGE_CURVE('',#15105,#15096,#15107,.T.); +#15105 = VERTEX_POINT('',#15106); +#15106 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#15107 = LINE('',#15108,#15109); +#15108 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#15109 = VECTOR('',#15110,1.); +#15110 = DIRECTION('',(0.,0.,1.)); +#15111 = ORIENTED_EDGE('',*,*,#15112,.T.); +#15112 = EDGE_CURVE('',#15105,#15113,#15115,.T.); +#15113 = VERTEX_POINT('',#15114); +#15114 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#15115 = CIRCLE('',#15116,3.E-02); +#15116 = AXIS2_PLACEMENT_3D('',#15117,#15118,#15119); +#15117 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#15118 = DIRECTION('',(-1.,0.,0.)); +#15119 = DIRECTION('',(0.,0.,1.)); +#15120 = ORIENTED_EDGE('',*,*,#15121,.F.); +#15121 = EDGE_CURVE('',#15062,#15113,#15122,.T.); +#15122 = LINE('',#15123,#15124); +#15123 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15124 = VECTOR('',#15125,1.); +#15125 = DIRECTION('',(0.,1.,0.)); +#15126 = PLANE('',#15127); +#15127 = AXIS2_PLACEMENT_3D('',#15128,#15129,#15130); +#15128 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#15129 = DIRECTION('',(1.,0.,0.)); +#15130 = DIRECTION('',(0.,0.,1.)); +#15131 = ADVANCED_FACE('',(#15132),#15158,.T.); +#15132 = FACE_BOUND('',#15133,.T.); +#15133 = EDGE_LOOP('',(#15134,#15135,#15143,#15152)); +#15134 = ORIENTED_EDGE('',*,*,#15059,.T.); +#15135 = ORIENTED_EDGE('',*,*,#15136,.T.); +#15136 = EDGE_CURVE('',#15062,#15137,#15139,.T.); +#15137 = VERTEX_POINT('',#15138); +#15138 = CARTESIAN_POINT('',(0.5,-0.34,3.E-02)); +#15139 = LINE('',#15140,#15141); +#15140 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#15141 = VECTOR('',#15142,1.); +#15142 = DIRECTION('',(1.,0.,0.)); +#15143 = ORIENTED_EDGE('',*,*,#15144,.F.); +#15144 = EDGE_CURVE('',#15145,#15137,#15147,.T.); +#15145 = VERTEX_POINT('',#15146); +#15146 = CARTESIAN_POINT('',(0.5,-0.37,6.E-02)); +#15147 = CIRCLE('',#15148,3.E-02); +#15148 = AXIS2_PLACEMENT_3D('',#15149,#15150,#15151); +#15149 = CARTESIAN_POINT('',(0.5,-0.34,6.E-02)); +#15150 = DIRECTION('',(1.,0.,-0.)); +#15151 = DIRECTION('',(0.,0.,1.)); +#15152 = ORIENTED_EDGE('',*,*,#15153,.F.); +#15153 = EDGE_CURVE('',#15060,#15145,#15154,.T.); +#15154 = LINE('',#15155,#15156); +#15155 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#15156 = VECTOR('',#15157,1.); +#15157 = DIRECTION('',(1.,0.,0.)); +#15158 = CYLINDRICAL_SURFACE('',#15159,3.E-02); +#15159 = AXIS2_PLACEMENT_3D('',#15160,#15161,#15162); +#15160 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#15161 = DIRECTION('',(1.,0.,0.)); +#15162 = DIRECTION('',(0.,-1.,0.)); +#15163 = ADVANCED_FACE('',(#15164),#15182,.F.); +#15164 = FACE_BOUND('',#15165,.F.); +#15165 = EDGE_LOOP('',(#15166,#15167,#15168,#15176)); +#15166 = ORIENTED_EDGE('',*,*,#15121,.F.); +#15167 = ORIENTED_EDGE('',*,*,#15136,.T.); +#15168 = ORIENTED_EDGE('',*,*,#15169,.T.); +#15169 = EDGE_CURVE('',#15137,#15170,#15172,.T.); +#15170 = VERTEX_POINT('',#15171); +#15171 = CARTESIAN_POINT('',(0.5,0.34,3.E-02)); +#15172 = LINE('',#15173,#15174); +#15173 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15174 = VECTOR('',#15175,1.); +#15175 = DIRECTION('',(0.,1.,0.)); +#15176 = ORIENTED_EDGE('',*,*,#15177,.F.); +#15177 = EDGE_CURVE('',#15113,#15170,#15178,.T.); +#15178 = LINE('',#15179,#15180); +#15179 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#15180 = VECTOR('',#15181,1.); +#15181 = DIRECTION('',(1.,0.,0.)); +#15182 = PLANE('',#15183); +#15183 = AXIS2_PLACEMENT_3D('',#15184,#15185,#15186); +#15184 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15185 = DIRECTION('',(0.,0.,1.)); +#15186 = DIRECTION('',(1.,0.,-0.)); +#15187 = ADVANCED_FACE('',(#15188),#15207,.T.); +#15188 = FACE_BOUND('',#15189,.T.); +#15189 = EDGE_LOOP('',(#15190,#15198,#15205,#15206)); +#15190 = ORIENTED_EDGE('',*,*,#15191,.T.); +#15191 = EDGE_CURVE('',#15105,#15192,#15194,.T.); +#15192 = VERTEX_POINT('',#15193); +#15193 = CARTESIAN_POINT('',(0.5,0.37,6.E-02)); +#15194 = LINE('',#15195,#15196); +#15195 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#15196 = VECTOR('',#15197,1.); +#15197 = DIRECTION('',(1.,0.,0.)); +#15198 = ORIENTED_EDGE('',*,*,#15199,.T.); +#15199 = EDGE_CURVE('',#15192,#15170,#15200,.T.); +#15200 = CIRCLE('',#15201,3.E-02); +#15201 = AXIS2_PLACEMENT_3D('',#15202,#15203,#15204); +#15202 = CARTESIAN_POINT('',(0.5,0.34,6.E-02)); +#15203 = DIRECTION('',(-1.,0.,0.)); +#15204 = DIRECTION('',(0.,0.,1.)); +#15205 = ORIENTED_EDGE('',*,*,#15177,.F.); +#15206 = ORIENTED_EDGE('',*,*,#15112,.F.); +#15207 = CYLINDRICAL_SURFACE('',#15208,3.E-02); +#15208 = AXIS2_PLACEMENT_3D('',#15209,#15210,#15211); +#15209 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#15210 = DIRECTION('',(1.,0.,0.)); +#15211 = DIRECTION('',(-0.,1.,0.)); +#15212 = ADVANCED_FACE('',(#15213),#15231,.T.); +#15213 = FACE_BOUND('',#15214,.T.); +#15214 = EDGE_LOOP('',(#15215,#15223,#15224,#15225)); +#15215 = ORIENTED_EDGE('',*,*,#15216,.F.); +#15216 = EDGE_CURVE('',#15192,#15217,#15219,.T.); +#15217 = VERTEX_POINT('',#15218); +#15218 = CARTESIAN_POINT('',(0.5,0.37,0.74)); +#15219 = LINE('',#15220,#15221); +#15220 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#15221 = VECTOR('',#15222,1.); +#15222 = DIRECTION('',(0.,0.,1.)); +#15223 = ORIENTED_EDGE('',*,*,#15191,.F.); +#15224 = ORIENTED_EDGE('',*,*,#15104,.T.); +#15225 = ORIENTED_EDGE('',*,*,#15226,.T.); +#15226 = EDGE_CURVE('',#15096,#15217,#15227,.T.); +#15227 = LINE('',#15228,#15229); +#15228 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#15229 = VECTOR('',#15230,1.); +#15230 = DIRECTION('',(1.,0.,0.)); +#15231 = PLANE('',#15232); +#15232 = AXIS2_PLACEMENT_3D('',#15233,#15234,#15235); +#15233 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#15234 = DIRECTION('',(0.,1.,0.)); +#15235 = DIRECTION('',(0.,-0.,1.)); +#15236 = ADVANCED_FACE('',(#15237),#15256,.T.); +#15237 = FACE_BOUND('',#15238,.T.); +#15238 = EDGE_LOOP('',(#15239,#15240,#15248,#15255)); +#15239 = ORIENTED_EDGE('',*,*,#15095,.T.); +#15240 = ORIENTED_EDGE('',*,*,#15241,.T.); +#15241 = EDGE_CURVE('',#15088,#15242,#15244,.T.); +#15242 = VERTEX_POINT('',#15243); +#15243 = CARTESIAN_POINT('',(0.5,0.34,0.77)); +#15244 = LINE('',#15245,#15246); +#15245 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#15246 = VECTOR('',#15247,1.); +#15247 = DIRECTION('',(1.,0.,0.)); +#15248 = ORIENTED_EDGE('',*,*,#15249,.F.); +#15249 = EDGE_CURVE('',#15217,#15242,#15250,.T.); +#15250 = CIRCLE('',#15251,3.E-02); +#15251 = AXIS2_PLACEMENT_3D('',#15252,#15253,#15254); +#15252 = CARTESIAN_POINT('',(0.5,0.34,0.74)); +#15253 = DIRECTION('',(1.,0.,-0.)); +#15254 = DIRECTION('',(0.,0.,1.)); +#15255 = ORIENTED_EDGE('',*,*,#15226,.F.); +#15256 = CYLINDRICAL_SURFACE('',#15257,3.E-02); +#15257 = AXIS2_PLACEMENT_3D('',#15258,#15259,#15260); +#15258 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#15259 = DIRECTION('',(1.,0.,0.)); +#15260 = DIRECTION('',(-0.,1.,0.)); +#15261 = ADVANCED_FACE('',(#15262),#15280,.T.); +#15262 = FACE_BOUND('',#15263,.T.); +#15263 = EDGE_LOOP('',(#15264,#15265,#15273,#15279)); +#15264 = ORIENTED_EDGE('',*,*,#15087,.F.); +#15265 = ORIENTED_EDGE('',*,*,#15266,.T.); +#15266 = EDGE_CURVE('',#15079,#15267,#15269,.T.); +#15267 = VERTEX_POINT('',#15268); +#15268 = CARTESIAN_POINT('',(0.5,-0.34,0.77)); +#15269 = LINE('',#15270,#15271); +#15270 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#15271 = VECTOR('',#15272,1.); +#15272 = DIRECTION('',(1.,0.,0.)); +#15273 = ORIENTED_EDGE('',*,*,#15274,.T.); +#15274 = EDGE_CURVE('',#15267,#15242,#15275,.T.); +#15275 = LINE('',#15276,#15277); +#15276 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#15277 = VECTOR('',#15278,1.); +#15278 = DIRECTION('',(0.,1.,0.)); +#15279 = ORIENTED_EDGE('',*,*,#15241,.F.); +#15280 = PLANE('',#15281); +#15281 = AXIS2_PLACEMENT_3D('',#15282,#15283,#15284); +#15282 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#15283 = DIRECTION('',(0.,0.,1.)); +#15284 = DIRECTION('',(1.,0.,-0.)); +#15285 = ADVANCED_FACE('',(#15286),#15305,.T.); +#15286 = FACE_BOUND('',#15287,.T.); +#15287 = EDGE_LOOP('',(#15288,#15296,#15303,#15304)); +#15288 = ORIENTED_EDGE('',*,*,#15289,.T.); +#15289 = EDGE_CURVE('',#15071,#15290,#15292,.T.); +#15290 = VERTEX_POINT('',#15291); +#15291 = CARTESIAN_POINT('',(0.5,-0.37,0.74)); +#15292 = LINE('',#15293,#15294); +#15293 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#15294 = VECTOR('',#15295,1.); +#15295 = DIRECTION('',(1.,0.,0.)); +#15296 = ORIENTED_EDGE('',*,*,#15297,.T.); +#15297 = EDGE_CURVE('',#15290,#15267,#15298,.T.); +#15298 = CIRCLE('',#15299,3.E-02); +#15299 = AXIS2_PLACEMENT_3D('',#15300,#15301,#15302); +#15300 = CARTESIAN_POINT('',(0.5,-0.34,0.74)); +#15301 = DIRECTION('',(-1.,0.,0.)); +#15302 = DIRECTION('',(0.,0.,1.)); +#15303 = ORIENTED_EDGE('',*,*,#15266,.F.); +#15304 = ORIENTED_EDGE('',*,*,#15078,.F.); +#15305 = CYLINDRICAL_SURFACE('',#15306,3.E-02); +#15306 = AXIS2_PLACEMENT_3D('',#15307,#15308,#15309); +#15307 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#15308 = DIRECTION('',(1.,0.,0.)); +#15309 = DIRECTION('',(0.,-1.,0.)); +#15310 = ADVANCED_FACE('',(#15311),#15322,.F.); +#15311 = FACE_BOUND('',#15312,.F.); +#15312 = EDGE_LOOP('',(#15313,#15319,#15320,#15321)); +#15313 = ORIENTED_EDGE('',*,*,#15314,.F.); +#15314 = EDGE_CURVE('',#15145,#15290,#15315,.T.); +#15315 = LINE('',#15316,#15317); +#15316 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15317 = VECTOR('',#15318,1.); +#15318 = DIRECTION('',(0.,0.,1.)); +#15319 = ORIENTED_EDGE('',*,*,#15153,.F.); +#15320 = ORIENTED_EDGE('',*,*,#15070,.T.); +#15321 = ORIENTED_EDGE('',*,*,#15289,.T.); +#15322 = PLANE('',#15323); +#15323 = AXIS2_PLACEMENT_3D('',#15324,#15325,#15326); +#15324 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#15325 = DIRECTION('',(0.,1.,0.)); +#15326 = DIRECTION('',(0.,-0.,1.)); +#15327 = ADVANCED_FACE('',(#15328,#15398),#15408,.F.); +#15328 = FACE_BOUND('',#15329,.F.); +#15329 = EDGE_LOOP('',(#15330,#15340,#15349,#15357,#15366,#15374,#15383, + #15391)); +#15330 = ORIENTED_EDGE('',*,*,#15331,.F.); +#15331 = EDGE_CURVE('',#15332,#15334,#15336,.T.); +#15332 = VERTEX_POINT('',#15333); +#15333 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#15334 = VERTEX_POINT('',#15335); +#15335 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#15336 = LINE('',#15337,#15338); +#15337 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15338 = VECTOR('',#15339,1.); +#15339 = DIRECTION('',(0.,0.,1.)); +#15340 = ORIENTED_EDGE('',*,*,#15341,.T.); +#15341 = EDGE_CURVE('',#15332,#15342,#15344,.T.); +#15342 = VERTEX_POINT('',#15343); +#15343 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#15344 = CIRCLE('',#15345,3.E-02); +#15345 = AXIS2_PLACEMENT_3D('',#15346,#15347,#15348); +#15346 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15347 = DIRECTION('',(1.,0.,-0.)); +#15348 = DIRECTION('',(0.,0.,1.)); +#15349 = ORIENTED_EDGE('',*,*,#15350,.T.); +#15350 = EDGE_CURVE('',#15342,#15351,#15353,.T.); +#15351 = VERTEX_POINT('',#15352); +#15352 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#15353 = LINE('',#15354,#15355); +#15354 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15355 = VECTOR('',#15356,1.); +#15356 = DIRECTION('',(0.,1.,0.)); +#15357 = ORIENTED_EDGE('',*,*,#15358,.F.); +#15358 = EDGE_CURVE('',#15359,#15351,#15361,.T.); +#15359 = VERTEX_POINT('',#15360); +#15360 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#15361 = CIRCLE('',#15362,3.E-02); +#15362 = AXIS2_PLACEMENT_3D('',#15363,#15364,#15365); +#15363 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#15364 = DIRECTION('',(-1.,0.,0.)); +#15365 = DIRECTION('',(0.,0.,1.)); +#15366 = ORIENTED_EDGE('',*,*,#15367,.T.); +#15367 = EDGE_CURVE('',#15359,#15368,#15370,.T.); +#15368 = VERTEX_POINT('',#15369); +#15369 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#15370 = LINE('',#15371,#15372); +#15371 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#15372 = VECTOR('',#15373,1.); +#15373 = DIRECTION('',(0.,0.,1.)); +#15374 = ORIENTED_EDGE('',*,*,#15375,.T.); +#15375 = EDGE_CURVE('',#15368,#15376,#15378,.T.); +#15376 = VERTEX_POINT('',#15377); +#15377 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#15378 = CIRCLE('',#15379,3.E-02); +#15379 = AXIS2_PLACEMENT_3D('',#15380,#15381,#15382); +#15380 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#15381 = DIRECTION('',(1.,0.,-0.)); +#15382 = DIRECTION('',(0.,0.,1.)); +#15383 = ORIENTED_EDGE('',*,*,#15384,.F.); +#15384 = EDGE_CURVE('',#15385,#15376,#15387,.T.); +#15385 = VERTEX_POINT('',#15386); +#15386 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#15387 = LINE('',#15388,#15389); +#15388 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#15389 = VECTOR('',#15390,1.); +#15390 = DIRECTION('',(0.,1.,0.)); +#15391 = ORIENTED_EDGE('',*,*,#15392,.F.); +#15392 = EDGE_CURVE('',#15334,#15385,#15393,.T.); +#15393 = CIRCLE('',#15394,3.E-02); +#15394 = AXIS2_PLACEMENT_3D('',#15395,#15396,#15397); +#15395 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#15396 = DIRECTION('',(-1.,0.,0.)); +#15397 = DIRECTION('',(0.,0.,1.)); +#15398 = FACE_BOUND('',#15399,.F.); +#15399 = EDGE_LOOP('',(#15400,#15401,#15402,#15403,#15404,#15405,#15406, + #15407)); +#15400 = ORIENTED_EDGE('',*,*,#15144,.F.); +#15401 = ORIENTED_EDGE('',*,*,#15314,.T.); +#15402 = ORIENTED_EDGE('',*,*,#15297,.T.); +#15403 = ORIENTED_EDGE('',*,*,#15274,.T.); +#15404 = ORIENTED_EDGE('',*,*,#15249,.F.); +#15405 = ORIENTED_EDGE('',*,*,#15216,.F.); +#15406 = ORIENTED_EDGE('',*,*,#15199,.T.); +#15407 = ORIENTED_EDGE('',*,*,#15169,.F.); +#15408 = PLANE('',#15409); +#15409 = AXIS2_PLACEMENT_3D('',#15410,#15411,#15412); +#15410 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15411 = DIRECTION('',(1.,0.,0.)); +#15412 = DIRECTION('',(0.,0.,1.)); +#15413 = ADVANCED_FACE('',(#15414),#15439,.F.); +#15414 = FACE_BOUND('',#15415,.F.); +#15415 = EDGE_LOOP('',(#15416,#15426,#15432,#15433)); +#15416 = ORIENTED_EDGE('',*,*,#15417,.F.); +#15417 = EDGE_CURVE('',#15418,#15420,#15422,.T.); +#15418 = VERTEX_POINT('',#15419); +#15419 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#15420 = VERTEX_POINT('',#15421); +#15421 = CARTESIAN_POINT('',(0.8,-0.4,0.77)); +#15422 = LINE('',#15423,#15424); +#15423 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#15424 = VECTOR('',#15425,1.); +#15425 = DIRECTION('',(0.,0.,1.)); +#15426 = ORIENTED_EDGE('',*,*,#15427,.F.); +#15427 = EDGE_CURVE('',#15332,#15418,#15428,.T.); +#15428 = LINE('',#15429,#15430); +#15429 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#15430 = VECTOR('',#15431,1.); +#15431 = DIRECTION('',(1.,0.,0.)); +#15432 = ORIENTED_EDGE('',*,*,#15331,.T.); +#15433 = ORIENTED_EDGE('',*,*,#15434,.T.); +#15434 = EDGE_CURVE('',#15334,#15420,#15435,.T.); +#15435 = LINE('',#15436,#15437); +#15436 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#15437 = VECTOR('',#15438,1.); +#15438 = DIRECTION('',(1.,0.,0.)); +#15439 = PLANE('',#15440); +#15440 = AXIS2_PLACEMENT_3D('',#15441,#15442,#15443); +#15441 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15442 = DIRECTION('',(0.,1.,0.)); +#15443 = DIRECTION('',(0.,-0.,1.)); +#15444 = ADVANCED_FACE('',(#15445),#15464,.T.); +#15445 = FACE_BOUND('',#15446,.T.); +#15446 = EDGE_LOOP('',(#15447,#15448,#15456,#15463)); +#15447 = ORIENTED_EDGE('',*,*,#15341,.T.); +#15448 = ORIENTED_EDGE('',*,*,#15449,.T.); +#15449 = EDGE_CURVE('',#15342,#15450,#15452,.T.); +#15450 = VERTEX_POINT('',#15451); +#15451 = CARTESIAN_POINT('',(0.8,-0.37,0.)); +#15452 = LINE('',#15453,#15454); +#15453 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#15454 = VECTOR('',#15455,1.); +#15455 = DIRECTION('',(1.,0.,0.)); +#15456 = ORIENTED_EDGE('',*,*,#15457,.F.); +#15457 = EDGE_CURVE('',#15418,#15450,#15458,.T.); +#15458 = CIRCLE('',#15459,3.E-02); +#15459 = AXIS2_PLACEMENT_3D('',#15460,#15461,#15462); +#15460 = CARTESIAN_POINT('',(0.8,-0.37,3.E-02)); +#15461 = DIRECTION('',(1.,0.,-0.)); +#15462 = DIRECTION('',(0.,0.,1.)); +#15463 = ORIENTED_EDGE('',*,*,#15427,.F.); +#15464 = CYLINDRICAL_SURFACE('',#15465,3.E-02); +#15465 = AXIS2_PLACEMENT_3D('',#15466,#15467,#15468); +#15466 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#15467 = DIRECTION('',(1.,0.,0.)); +#15468 = DIRECTION('',(0.,-1.,0.)); +#15469 = ADVANCED_FACE('',(#15470),#15489,.T.); +#15470 = FACE_BOUND('',#15471,.T.); +#15471 = EDGE_LOOP('',(#15472,#15473,#15482,#15488)); +#15472 = ORIENTED_EDGE('',*,*,#15434,.T.); +#15473 = ORIENTED_EDGE('',*,*,#15474,.T.); +#15474 = EDGE_CURVE('',#15420,#15475,#15477,.T.); +#15475 = VERTEX_POINT('',#15476); +#15476 = CARTESIAN_POINT('',(0.8,-0.37,0.8)); +#15477 = CIRCLE('',#15478,3.E-02); +#15478 = AXIS2_PLACEMENT_3D('',#15479,#15480,#15481); +#15479 = CARTESIAN_POINT('',(0.8,-0.37,0.77)); +#15480 = DIRECTION('',(-1.,0.,0.)); +#15481 = DIRECTION('',(0.,0.,1.)); +#15482 = ORIENTED_EDGE('',*,*,#15483,.F.); +#15483 = EDGE_CURVE('',#15385,#15475,#15484,.T.); +#15484 = LINE('',#15485,#15486); +#15485 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#15486 = VECTOR('',#15487,1.); +#15487 = DIRECTION('',(1.,0.,0.)); +#15488 = ORIENTED_EDGE('',*,*,#15392,.F.); +#15489 = CYLINDRICAL_SURFACE('',#15490,3.E-02); +#15490 = AXIS2_PLACEMENT_3D('',#15491,#15492,#15493); +#15491 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#15492 = DIRECTION('',(1.,0.,0.)); +#15493 = DIRECTION('',(0.,-1.,0.)); +#15494 = ADVANCED_FACE('',(#15495),#15513,.F.); +#15495 = FACE_BOUND('',#15496,.F.); +#15496 = EDGE_LOOP('',(#15497,#15498,#15499,#15507)); +#15497 = ORIENTED_EDGE('',*,*,#15350,.F.); +#15498 = ORIENTED_EDGE('',*,*,#15449,.T.); +#15499 = ORIENTED_EDGE('',*,*,#15500,.T.); +#15500 = EDGE_CURVE('',#15450,#15501,#15503,.T.); +#15501 = VERTEX_POINT('',#15502); +#15502 = CARTESIAN_POINT('',(0.8,0.37,0.)); +#15503 = LINE('',#15504,#15505); +#15504 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#15505 = VECTOR('',#15506,1.); +#15506 = DIRECTION('',(0.,1.,0.)); +#15507 = ORIENTED_EDGE('',*,*,#15508,.F.); +#15508 = EDGE_CURVE('',#15351,#15501,#15509,.T.); +#15509 = LINE('',#15510,#15511); +#15510 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#15511 = VECTOR('',#15512,1.); +#15512 = DIRECTION('',(1.,0.,0.)); +#15513 = PLANE('',#15514); +#15514 = AXIS2_PLACEMENT_3D('',#15515,#15516,#15517); +#15515 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#15516 = DIRECTION('',(0.,0.,1.)); +#15517 = DIRECTION('',(1.,0.,-0.)); +#15518 = ADVANCED_FACE('',(#15519),#15537,.T.); +#15519 = FACE_BOUND('',#15520,.T.); +#15520 = EDGE_LOOP('',(#15521,#15522,#15523,#15531)); +#15521 = ORIENTED_EDGE('',*,*,#15384,.F.); +#15522 = ORIENTED_EDGE('',*,*,#15483,.T.); +#15523 = ORIENTED_EDGE('',*,*,#15524,.T.); +#15524 = EDGE_CURVE('',#15475,#15525,#15527,.T.); +#15525 = VERTEX_POINT('',#15526); +#15526 = CARTESIAN_POINT('',(0.8,0.37,0.8)); +#15527 = LINE('',#15528,#15529); +#15528 = CARTESIAN_POINT('',(0.8,-0.4,0.8)); +#15529 = VECTOR('',#15530,1.); +#15530 = DIRECTION('',(0.,1.,0.)); +#15531 = ORIENTED_EDGE('',*,*,#15532,.F.); +#15532 = EDGE_CURVE('',#15376,#15525,#15533,.T.); +#15533 = LINE('',#15534,#15535); +#15534 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#15535 = VECTOR('',#15536,1.); +#15536 = DIRECTION('',(1.,0.,0.)); +#15537 = PLANE('',#15538); +#15538 = AXIS2_PLACEMENT_3D('',#15539,#15540,#15541); +#15539 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#15540 = DIRECTION('',(0.,0.,1.)); +#15541 = DIRECTION('',(1.,0.,-0.)); +#15542 = ADVANCED_FACE('',(#15543),#15562,.T.); +#15543 = FACE_BOUND('',#15544,.T.); +#15544 = EDGE_LOOP('',(#15545,#15553,#15560,#15561)); +#15545 = ORIENTED_EDGE('',*,*,#15546,.T.); +#15546 = EDGE_CURVE('',#15359,#15547,#15549,.T.); +#15547 = VERTEX_POINT('',#15548); +#15548 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#15549 = LINE('',#15550,#15551); +#15550 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#15551 = VECTOR('',#15552,1.); +#15552 = DIRECTION('',(1.,0.,0.)); +#15553 = ORIENTED_EDGE('',*,*,#15554,.T.); +#15554 = EDGE_CURVE('',#15547,#15501,#15555,.T.); +#15555 = CIRCLE('',#15556,3.E-02); +#15556 = AXIS2_PLACEMENT_3D('',#15557,#15558,#15559); +#15557 = CARTESIAN_POINT('',(0.8,0.37,3.E-02)); +#15558 = DIRECTION('',(-1.,0.,0.)); +#15559 = DIRECTION('',(0.,0.,1.)); +#15560 = ORIENTED_EDGE('',*,*,#15508,.F.); +#15561 = ORIENTED_EDGE('',*,*,#15358,.F.); +#15562 = CYLINDRICAL_SURFACE('',#15563,3.E-02); +#15563 = AXIS2_PLACEMENT_3D('',#15564,#15565,#15566); +#15564 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#15565 = DIRECTION('',(1.,0.,0.)); +#15566 = DIRECTION('',(-0.,1.,0.)); +#15567 = ADVANCED_FACE('',(#15568),#15587,.T.); +#15568 = FACE_BOUND('',#15569,.T.); +#15569 = EDGE_LOOP('',(#15570,#15571,#15572,#15581)); +#15570 = ORIENTED_EDGE('',*,*,#15375,.T.); +#15571 = ORIENTED_EDGE('',*,*,#15532,.T.); +#15572 = ORIENTED_EDGE('',*,*,#15573,.F.); +#15573 = EDGE_CURVE('',#15574,#15525,#15576,.T.); +#15574 = VERTEX_POINT('',#15575); +#15575 = CARTESIAN_POINT('',(0.8,0.4,0.77)); +#15576 = CIRCLE('',#15577,3.E-02); +#15577 = AXIS2_PLACEMENT_3D('',#15578,#15579,#15580); +#15578 = CARTESIAN_POINT('',(0.8,0.37,0.77)); +#15579 = DIRECTION('',(1.,0.,-0.)); +#15580 = DIRECTION('',(0.,0.,1.)); +#15581 = ORIENTED_EDGE('',*,*,#15582,.F.); +#15582 = EDGE_CURVE('',#15368,#15574,#15583,.T.); +#15583 = LINE('',#15584,#15585); +#15584 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#15585 = VECTOR('',#15586,1.); +#15586 = DIRECTION('',(1.,0.,0.)); +#15587 = CYLINDRICAL_SURFACE('',#15588,3.E-02); +#15588 = AXIS2_PLACEMENT_3D('',#15589,#15590,#15591); +#15589 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#15590 = DIRECTION('',(1.,0.,0.)); +#15591 = DIRECTION('',(-0.,1.,0.)); +#15592 = ADVANCED_FACE('',(#15593),#15604,.T.); +#15593 = FACE_BOUND('',#15594,.T.); +#15594 = EDGE_LOOP('',(#15595,#15601,#15602,#15603)); +#15595 = ORIENTED_EDGE('',*,*,#15596,.F.); +#15596 = EDGE_CURVE('',#15547,#15574,#15597,.T.); +#15597 = LINE('',#15598,#15599); +#15598 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#15599 = VECTOR('',#15600,1.); +#15600 = DIRECTION('',(0.,0.,1.)); +#15601 = ORIENTED_EDGE('',*,*,#15546,.F.); +#15602 = ORIENTED_EDGE('',*,*,#15367,.T.); +#15603 = ORIENTED_EDGE('',*,*,#15582,.T.); +#15604 = PLANE('',#15605); +#15605 = AXIS2_PLACEMENT_3D('',#15606,#15607,#15608); +#15606 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#15607 = DIRECTION('',(0.,1.,0.)); +#15608 = DIRECTION('',(0.,-0.,1.)); +#15609 = ADVANCED_FACE('',(#15610),#15620,.T.); +#15610 = FACE_BOUND('',#15611,.T.); +#15611 = EDGE_LOOP('',(#15612,#15613,#15614,#15615,#15616,#15617,#15618, + #15619)); +#15612 = ORIENTED_EDGE('',*,*,#15417,.F.); +#15613 = ORIENTED_EDGE('',*,*,#15457,.T.); +#15614 = ORIENTED_EDGE('',*,*,#15500,.T.); +#15615 = ORIENTED_EDGE('',*,*,#15554,.F.); +#15616 = ORIENTED_EDGE('',*,*,#15596,.T.); +#15617 = ORIENTED_EDGE('',*,*,#15573,.T.); +#15618 = ORIENTED_EDGE('',*,*,#15524,.F.); +#15619 = ORIENTED_EDGE('',*,*,#15474,.F.); +#15620 = PLANE('',#15621); +#15621 = AXIS2_PLACEMENT_3D('',#15622,#15623,#15624); +#15622 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#15623 = DIRECTION('',(1.,0.,0.)); +#15624 = DIRECTION('',(0.,0.,1.)); +#15625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#15629)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#15626,#15627,#15628)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#15626 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#15627 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#15628 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#15629 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#15626, + 'distance_accuracy_value','confusion accuracy'); +#15630 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#15631,#15633); +#15631 = ( REPRESENTATION_RELATIONSHIP('','',#14770,#14747) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#15632) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#15632 = ITEM_DEFINED_TRANSFORMATION('','',#11,#14748); +#15633 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #15634); +#15634 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('16','=>[0:1:1:15]','',#14742, + #14765,$); +#15635 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#14767)); +#15636 = SHAPE_DEFINITION_REPRESENTATION(#15637,#15643); +#15637 = PRODUCT_DEFINITION_SHAPE('','',#15638); +#15638 = PRODUCT_DEFINITION('design','',#15639,#15642); +#15639 = PRODUCT_DEFINITION_FORMATION('','',#15640); +#15640 = PRODUCT('SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm', + 'SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm','',(#15641)); +#15641 = PRODUCT_CONTEXT('',#2,'mechanical'); +#15642 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#15643 = SHAPE_REPRESENTATION('',(#11,#15644),#15648); +#15644 = AXIS2_PLACEMENT_3D('',#15645,#15646,#15647); +#15645 = CARTESIAN_POINT('',(0.,0.,0.)); +#15646 = DIRECTION('',(0.,0.,1.)); +#15647 = DIRECTION('',(1.,0.,-0.)); +#15648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#15652)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#15649,#15650,#15651)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#15649 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#15650 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#15651 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#15652 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#15649, + 'distance_accuracy_value','confusion accuracy'); +#15653 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#15654,#15656); +#15654 = ( REPRESENTATION_RELATIONSHIP('','',#15643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#15655) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#15655 = ITEM_DEFINED_TRANSFORMATION('','',#11,#55); +#15656 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #15657); +#15657 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('19','U7','',#5,#15638,$); +#15658 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#15640)); +#15659 = SHAPE_DEFINITION_REPRESENTATION(#15660,#15666); +#15660 = PRODUCT_DEFINITION_SHAPE('','',#15661); +#15661 = PRODUCT_DEFINITION('design','',#15662,#15665); +#15662 = PRODUCT_DEFINITION_FORMATION('','',#15663); +#15663 = PRODUCT('SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm', + 'SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm','',(#15664)); +#15664 = PRODUCT_CONTEXT('',#2,'mechanical'); +#15665 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#15666 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15667),#20279); +#15667 = MANIFOLD_SOLID_BREP('',#15668); +#15668 = CLOSED_SHELL('',(#15669,#15707,#15804,#15827,#15856,#15879, + #15966,#16053,#16076,#16099,#16116,#16147,#16171,#16195,#16212, + #16235,#16323,#16339,#16369,#16400,#16431,#16462,#16493,#16524, + #16555,#16586,#16603,#16620,#16651,#16682,#16713,#16744,#16775, + #16806,#16837,#16867,#16890,#16913,#16930,#16942,#16987,#17073, + #17096,#17119,#17142,#17229,#17267,#17316,#17408,#17433,#17517, + #17539,#17631,#17656,#17740,#17762,#17854,#17879,#17963,#17980, + #18065,#18090,#18167,#18252,#18277,#18354,#18371,#18463,#18488, + #18572,#18594,#18686,#18711,#18795,#18817,#18909,#18934,#19018, + #19035,#19054,#19073,#19092,#19138,#19154,#19173,#19192,#19211, + #19227,#19244,#19256,#19273,#19290,#19307,#19324,#19341,#19358, + #19375,#19387,#19404,#19421,#19438,#19455,#19472,#19489,#19506, + #19518,#19535,#19552,#19569,#19586,#19603,#19620,#19637,#19649, + #19666,#19683,#19700,#19717,#19734,#19751,#19763,#19780,#19797, + #19814,#19831,#19848,#19865,#19877,#19894,#19911,#19928,#19945, + #19962,#19979,#19996,#20008,#20025,#20042,#20059,#20076,#20093, + #20110,#20127,#20139,#20156,#20173,#20190,#20207,#20224,#20241, + #20258,#20270)); +#15669 = ADVANCED_FACE('',(#15670),#15702,.F.); +#15670 = FACE_BOUND('',#15671,.F.); +#15671 = EDGE_LOOP('',(#15672,#15682,#15689,#15697)); +#15672 = ORIENTED_EDGE('',*,*,#15673,.T.); +#15673 = EDGE_CURVE('',#15674,#15676,#15678,.T.); +#15674 = VERTEX_POINT('',#15675); +#15675 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15676 = VERTEX_POINT('',#15677); +#15677 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15678 = LINE('',#15679,#15680); +#15679 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15680 = VECTOR('',#15681,1.); +#15681 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15682 = ORIENTED_EDGE('',*,*,#15683,.T.); +#15683 = EDGE_CURVE('',#15676,#15684,#15686,.T.); +#15684 = VERTEX_POINT('',#15685); +#15685 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15686 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15687,#15688),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15687 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15688 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15689 = ORIENTED_EDGE('',*,*,#15690,.F.); +#15690 = EDGE_CURVE('',#15691,#15684,#15693,.T.); +#15691 = VERTEX_POINT('',#15692); +#15692 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15693 = LINE('',#15694,#15695); +#15694 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15695 = VECTOR('',#15696,1.); +#15696 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15697 = ORIENTED_EDGE('',*,*,#15698,.F.); +#15698 = EDGE_CURVE('',#15674,#15691,#15699,.T.); +#15699 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15700,#15701),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15700 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15701 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15702 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15703,#15704) + ,(#15705,#15706 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#15703 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15704 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15705 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15706 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15707 = ADVANCED_FACE('',(#15708,#15765),#15799,.T.); +#15708 = FACE_BOUND('',#15709,.T.); +#15709 = EDGE_LOOP('',(#15710,#15711,#15719,#15727,#15735,#15743,#15751, + #15759)); +#15710 = ORIENTED_EDGE('',*,*,#15673,.T.); +#15711 = ORIENTED_EDGE('',*,*,#15712,.T.); +#15712 = EDGE_CURVE('',#15676,#15713,#15715,.T.); +#15713 = VERTEX_POINT('',#15714); +#15714 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15715 = LINE('',#15716,#15717); +#15716 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15717 = VECTOR('',#15718,1.); +#15718 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#15719 = ORIENTED_EDGE('',*,*,#15720,.T.); +#15720 = EDGE_CURVE('',#15713,#15721,#15723,.T.); +#15721 = VERTEX_POINT('',#15722); +#15722 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#15723 = LINE('',#15724,#15725); +#15724 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15725 = VECTOR('',#15726,1.); +#15726 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15727 = ORIENTED_EDGE('',*,*,#15728,.T.); +#15728 = EDGE_CURVE('',#15721,#15729,#15731,.T.); +#15729 = VERTEX_POINT('',#15730); +#15730 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#15731 = LINE('',#15732,#15733); +#15732 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#15733 = VECTOR('',#15734,1.); +#15734 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#15735 = ORIENTED_EDGE('',*,*,#15736,.T.); +#15736 = EDGE_CURVE('',#15729,#15737,#15739,.T.); +#15737 = VERTEX_POINT('',#15738); +#15738 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#15739 = LINE('',#15740,#15741); +#15740 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#15741 = VECTOR('',#15742,1.); +#15742 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#15743 = ORIENTED_EDGE('',*,*,#15744,.T.); +#15744 = EDGE_CURVE('',#15737,#15745,#15747,.T.); +#15745 = VERTEX_POINT('',#15746); +#15746 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15747 = LINE('',#15748,#15749); +#15748 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#15749 = VECTOR('',#15750,1.); +#15750 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#15751 = ORIENTED_EDGE('',*,*,#15752,.T.); +#15752 = EDGE_CURVE('',#15745,#15753,#15755,.T.); +#15753 = VERTEX_POINT('',#15754); +#15754 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15755 = LINE('',#15756,#15757); +#15756 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15757 = VECTOR('',#15758,1.); +#15758 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15759 = ORIENTED_EDGE('',*,*,#15760,.T.); +#15760 = EDGE_CURVE('',#15753,#15674,#15761,.T.); +#15761 = LINE('',#15762,#15763); +#15762 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15763 = VECTOR('',#15764,1.); +#15764 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#15765 = FACE_BOUND('',#15766,.T.); +#15766 = EDGE_LOOP('',(#15767,#15777,#15785,#15793)); +#15767 = ORIENTED_EDGE('',*,*,#15768,.F.); +#15768 = EDGE_CURVE('',#15769,#15771,#15773,.T.); +#15769 = VERTEX_POINT('',#15770); +#15770 = CARTESIAN_POINT('',(1.145,1.5,5.E-02)); +#15771 = VERTEX_POINT('',#15772); +#15772 = CARTESIAN_POINT('',(1.145,-1.5,5.E-02)); +#15773 = LINE('',#15774,#15775); +#15774 = CARTESIAN_POINT('',(1.145,1.5,5.E-02)); +#15775 = VECTOR('',#15776,1.); +#15776 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15777 = ORIENTED_EDGE('',*,*,#15778,.F.); +#15778 = EDGE_CURVE('',#15779,#15769,#15781,.T.); +#15779 = VERTEX_POINT('',#15780); +#15780 = CARTESIAN_POINT('',(-1.145,1.5,5.E-02)); +#15781 = LINE('',#15782,#15783); +#15782 = CARTESIAN_POINT('',(-1.145,1.5,5.E-02)); +#15783 = VECTOR('',#15784,1.); +#15784 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15785 = ORIENTED_EDGE('',*,*,#15786,.T.); +#15786 = EDGE_CURVE('',#15779,#15787,#15789,.T.); +#15787 = VERTEX_POINT('',#15788); +#15788 = CARTESIAN_POINT('',(-1.145,-1.5,5.E-02)); +#15789 = LINE('',#15790,#15791); +#15790 = CARTESIAN_POINT('',(-1.145,1.5,5.E-02)); +#15791 = VECTOR('',#15792,1.); +#15792 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15793 = ORIENTED_EDGE('',*,*,#15794,.T.); +#15794 = EDGE_CURVE('',#15787,#15771,#15795,.T.); +#15795 = LINE('',#15796,#15797); +#15796 = CARTESIAN_POINT('',(-1.145,-1.5,5.E-02)); +#15797 = VECTOR('',#15798,1.); +#15798 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15799 = PLANE('',#15800); +#15800 = AXIS2_PLACEMENT_3D('',#15801,#15802,#15803); +#15801 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15802 = DIRECTION('',(0.,0.,-1.)); +#15803 = DIRECTION('',(0.574848939807,-0.8182595532,0.)); +#15804 = ADVANCED_FACE('',(#15805),#15822,.F.); +#15805 = FACE_BOUND('',#15806,.F.); +#15806 = EDGE_LOOP('',(#15807,#15808,#15815,#15821)); +#15807 = ORIENTED_EDGE('',*,*,#15712,.T.); +#15808 = ORIENTED_EDGE('',*,*,#15809,.T.); +#15809 = EDGE_CURVE('',#15713,#15810,#15812,.T.); +#15810 = VERTEX_POINT('',#15811); +#15811 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15812 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15813,#15814),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15813 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15814 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15815 = ORIENTED_EDGE('',*,*,#15816,.F.); +#15816 = EDGE_CURVE('',#15684,#15810,#15817,.T.); +#15817 = LINE('',#15818,#15819); +#15818 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15819 = VECTOR('',#15820,1.); +#15820 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#15821 = ORIENTED_EDGE('',*,*,#15683,.F.); +#15822 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15823,#15824) + ,(#15825,#15826 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#15823 = CARTESIAN_POINT('',(1.649421017995,2.347842035991,5.E-02)); +#15824 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15825 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#15826 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15827 = ADVANCED_FACE('',(#15828),#15851,.F.); +#15828 = FACE_BOUND('',#15829,.F.); +#15829 = EDGE_LOOP('',(#15830,#15831,#15838,#15846)); +#15830 = ORIENTED_EDGE('',*,*,#15690,.T.); +#15831 = ORIENTED_EDGE('',*,*,#15832,.T.); +#15832 = EDGE_CURVE('',#15684,#15833,#15835,.T.); +#15833 = VERTEX_POINT('',#15834); +#15834 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#15835 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15836,#15837),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15836 = CARTESIAN_POINT('',(1.7005,2.45,0.695)); +#15837 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#15838 = ORIENTED_EDGE('',*,*,#15839,.F.); +#15839 = EDGE_CURVE('',#15840,#15833,#15842,.T.); +#15840 = VERTEX_POINT('',#15841); +#15841 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15842 = LINE('',#15843,#15844); +#15843 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15844 = VECTOR('',#15845,1.); +#15845 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15846 = ORIENTED_EDGE('',*,*,#15847,.F.); +#15847 = EDGE_CURVE('',#15691,#15840,#15848,.T.); +#15848 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15849,#15850),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15849 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15850 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15851 = PLANE('',#15852); +#15852 = AXIS2_PLACEMENT_3D('',#15853,#15854,#15855); +#15853 = CARTESIAN_POINT('',(-1.7005,2.45,0.905)); +#15854 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15855 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#15856 = ADVANCED_FACE('',(#15857),#15874,.F.); +#15857 = FACE_BOUND('',#15858,.F.); +#15858 = EDGE_LOOP('',(#15859,#15860,#15861,#15869)); +#15859 = ORIENTED_EDGE('',*,*,#15760,.T.); +#15860 = ORIENTED_EDGE('',*,*,#15698,.T.); +#15861 = ORIENTED_EDGE('',*,*,#15862,.F.); +#15862 = EDGE_CURVE('',#15863,#15691,#15865,.T.); +#15863 = VERTEX_POINT('',#15864); +#15864 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15865 = LINE('',#15866,#15867); +#15866 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15867 = VECTOR('',#15868,1.); +#15868 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#15869 = ORIENTED_EDGE('',*,*,#15870,.F.); +#15870 = EDGE_CURVE('',#15753,#15863,#15871,.T.); +#15871 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15872,#15873),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15872 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15873 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15874 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15875,#15876) + ,(#15877,#15878 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#15875 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15876 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15877 = CARTESIAN_POINT('',(-1.649421017995,2.347842035991,5.E-02)); +#15878 = CARTESIAN_POINT('',(-1.7005,2.45,0.695)); +#15879 = ADVANCED_FACE('',(#15880),#15961,.F.); +#15880 = FACE_BOUND('',#15881,.F.); +#15881 = EDGE_LOOP('',(#15882,#15883,#15884,#15892,#15900,#15908,#15916, + #15924,#15932,#15940,#15948,#15956)); +#15882 = ORIENTED_EDGE('',*,*,#15752,.T.); +#15883 = ORIENTED_EDGE('',*,*,#15870,.T.); +#15884 = ORIENTED_EDGE('',*,*,#15885,.F.); +#15885 = EDGE_CURVE('',#15886,#15863,#15888,.T.); +#15886 = VERTEX_POINT('',#15887); +#15887 = CARTESIAN_POINT('',(-1.95,2.11,0.695)); +#15888 = LINE('',#15889,#15890); +#15889 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15890 = VECTOR('',#15891,1.); +#15891 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15892 = ORIENTED_EDGE('',*,*,#15893,.F.); +#15893 = EDGE_CURVE('',#15894,#15886,#15896,.T.); +#15894 = VERTEX_POINT('',#15895); +#15895 = CARTESIAN_POINT('',(-1.95,1.7,0.695)); +#15896 = LINE('',#15897,#15898); +#15897 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15898 = VECTOR('',#15899,1.); +#15899 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15900 = ORIENTED_EDGE('',*,*,#15901,.F.); +#15901 = EDGE_CURVE('',#15902,#15894,#15904,.T.); +#15902 = VERTEX_POINT('',#15903); +#15903 = CARTESIAN_POINT('',(-1.95,0.84,0.695)); +#15904 = LINE('',#15905,#15906); +#15905 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15906 = VECTOR('',#15907,1.); +#15907 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15908 = ORIENTED_EDGE('',*,*,#15909,.F.); +#15909 = EDGE_CURVE('',#15910,#15902,#15912,.T.); +#15910 = VERTEX_POINT('',#15911); +#15911 = CARTESIAN_POINT('',(-1.95,0.43,0.695)); +#15912 = LINE('',#15913,#15914); +#15913 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15914 = VECTOR('',#15915,1.); +#15915 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15916 = ORIENTED_EDGE('',*,*,#15917,.F.); +#15917 = EDGE_CURVE('',#15918,#15910,#15920,.T.); +#15918 = VERTEX_POINT('',#15919); +#15919 = CARTESIAN_POINT('',(-1.95,-0.43,0.695)); +#15920 = LINE('',#15921,#15922); +#15921 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15922 = VECTOR('',#15923,1.); +#15923 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15924 = ORIENTED_EDGE('',*,*,#15925,.F.); +#15925 = EDGE_CURVE('',#15926,#15918,#15928,.T.); +#15926 = VERTEX_POINT('',#15927); +#15927 = CARTESIAN_POINT('',(-1.95,-0.84,0.695)); +#15928 = LINE('',#15929,#15930); +#15929 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15930 = VECTOR('',#15931,1.); +#15931 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15932 = ORIENTED_EDGE('',*,*,#15933,.F.); +#15933 = EDGE_CURVE('',#15934,#15926,#15936,.T.); +#15934 = VERTEX_POINT('',#15935); +#15935 = CARTESIAN_POINT('',(-1.95,-1.7,0.695)); +#15936 = LINE('',#15937,#15938); +#15937 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15938 = VECTOR('',#15939,1.); +#15939 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15940 = ORIENTED_EDGE('',*,*,#15941,.F.); +#15941 = EDGE_CURVE('',#15942,#15934,#15944,.T.); +#15942 = VERTEX_POINT('',#15943); +#15943 = CARTESIAN_POINT('',(-1.95,-2.11,0.695)); +#15944 = LINE('',#15945,#15946); +#15945 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15946 = VECTOR('',#15947,1.); +#15947 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15948 = ORIENTED_EDGE('',*,*,#15949,.F.); +#15949 = EDGE_CURVE('',#15950,#15942,#15952,.T.); +#15950 = VERTEX_POINT('',#15951); +#15951 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15952 = LINE('',#15953,#15954); +#15953 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15954 = VECTOR('',#15955,1.); +#15955 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#15956 = ORIENTED_EDGE('',*,*,#15957,.F.); +#15957 = EDGE_CURVE('',#15745,#15950,#15958,.T.); +#15958 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15959,#15960),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15959 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15960 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15961 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#15962,#15963) + ,(#15964,#15965 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#15962 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#15963 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#15964 = CARTESIAN_POINT('',(-1.847842035991,2.149421017995,5.E-02)); +#15965 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#15966 = ADVANCED_FACE('',(#15967),#16048,.F.); +#15967 = FACE_BOUND('',#15968,.F.); +#15968 = EDGE_LOOP('',(#15969,#15970,#15977,#15985,#15993,#16001,#16009, + #16017,#16025,#16033,#16041,#16047)); +#15969 = ORIENTED_EDGE('',*,*,#15720,.T.); +#15970 = ORIENTED_EDGE('',*,*,#15971,.T.); +#15971 = EDGE_CURVE('',#15721,#15972,#15974,.T.); +#15972 = VERTEX_POINT('',#15973); +#15973 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#15974 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15975,#15976),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#15975 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#15976 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#15977 = ORIENTED_EDGE('',*,*,#15978,.F.); +#15978 = EDGE_CURVE('',#15979,#15972,#15981,.T.); +#15979 = VERTEX_POINT('',#15980); +#15980 = CARTESIAN_POINT('',(1.95,-2.11,0.695)); +#15981 = LINE('',#15982,#15983); +#15982 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15983 = VECTOR('',#15984,1.); +#15984 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15985 = ORIENTED_EDGE('',*,*,#15986,.F.); +#15986 = EDGE_CURVE('',#15987,#15979,#15989,.T.); +#15987 = VERTEX_POINT('',#15988); +#15988 = CARTESIAN_POINT('',(1.95,-1.7,0.695)); +#15989 = LINE('',#15990,#15991); +#15990 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15991 = VECTOR('',#15992,1.); +#15992 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#15993 = ORIENTED_EDGE('',*,*,#15994,.F.); +#15994 = EDGE_CURVE('',#15995,#15987,#15997,.T.); +#15995 = VERTEX_POINT('',#15996); +#15996 = CARTESIAN_POINT('',(1.95,-0.84,0.695)); +#15997 = LINE('',#15998,#15999); +#15998 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#15999 = VECTOR('',#16000,1.); +#16000 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16001 = ORIENTED_EDGE('',*,*,#16002,.F.); +#16002 = EDGE_CURVE('',#16003,#15995,#16005,.T.); +#16003 = VERTEX_POINT('',#16004); +#16004 = CARTESIAN_POINT('',(1.95,-0.43,0.695)); +#16005 = LINE('',#16006,#16007); +#16006 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16007 = VECTOR('',#16008,1.); +#16008 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16009 = ORIENTED_EDGE('',*,*,#16010,.F.); +#16010 = EDGE_CURVE('',#16011,#16003,#16013,.T.); +#16011 = VERTEX_POINT('',#16012); +#16012 = CARTESIAN_POINT('',(1.95,0.43,0.695)); +#16013 = LINE('',#16014,#16015); +#16014 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16015 = VECTOR('',#16016,1.); +#16016 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16017 = ORIENTED_EDGE('',*,*,#16018,.F.); +#16018 = EDGE_CURVE('',#16019,#16011,#16021,.T.); +#16019 = VERTEX_POINT('',#16020); +#16020 = CARTESIAN_POINT('',(1.95,0.84,0.695)); +#16021 = LINE('',#16022,#16023); +#16022 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16023 = VECTOR('',#16024,1.); +#16024 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16025 = ORIENTED_EDGE('',*,*,#16026,.F.); +#16026 = EDGE_CURVE('',#16027,#16019,#16029,.T.); +#16027 = VERTEX_POINT('',#16028); +#16028 = CARTESIAN_POINT('',(1.95,1.7,0.695)); +#16029 = LINE('',#16030,#16031); +#16030 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16031 = VECTOR('',#16032,1.); +#16032 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16033 = ORIENTED_EDGE('',*,*,#16034,.F.); +#16034 = EDGE_CURVE('',#16035,#16027,#16037,.T.); +#16035 = VERTEX_POINT('',#16036); +#16036 = CARTESIAN_POINT('',(1.95,2.11,0.695)); +#16037 = LINE('',#16038,#16039); +#16038 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16039 = VECTOR('',#16040,1.); +#16040 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16041 = ORIENTED_EDGE('',*,*,#16042,.F.); +#16042 = EDGE_CURVE('',#15810,#16035,#16043,.T.); +#16043 = LINE('',#16044,#16045); +#16044 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16045 = VECTOR('',#16046,1.); +#16046 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16047 = ORIENTED_EDGE('',*,*,#15809,.F.); +#16048 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16049,#16050) + ,(#16051,#16052 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#16049 = CARTESIAN_POINT('',(1.847842035991,2.149421017995,5.E-02)); +#16050 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16051 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#16052 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16053 = ADVANCED_FACE('',(#16054),#16071,.F.); +#16054 = FACE_BOUND('',#16055,.F.); +#16055 = EDGE_LOOP('',(#16056,#16057,#16058,#16066)); +#16056 = ORIENTED_EDGE('',*,*,#15744,.T.); +#16057 = ORIENTED_EDGE('',*,*,#15957,.T.); +#16058 = ORIENTED_EDGE('',*,*,#16059,.F.); +#16059 = EDGE_CURVE('',#16060,#15950,#16062,.T.); +#16060 = VERTEX_POINT('',#16061); +#16061 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16062 = LINE('',#16063,#16064); +#16063 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16064 = VECTOR('',#16065,1.); +#16065 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16066 = ORIENTED_EDGE('',*,*,#16067,.F.); +#16067 = EDGE_CURVE('',#15737,#16060,#16068,.T.); +#16068 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16069,#16070),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16069 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#16070 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16071 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16072,#16073) + ,(#16074,#16075 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#16072 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#16073 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16074 = CARTESIAN_POINT('',(-1.847842035991,-2.149421017995,5.E-02)); +#16075 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#16076 = ADVANCED_FACE('',(#16077),#16094,.F.); +#16077 = FACE_BOUND('',#16078,.F.); +#16078 = EDGE_LOOP('',(#16079,#16080,#16087,#16093)); +#16079 = ORIENTED_EDGE('',*,*,#15728,.T.); +#16080 = ORIENTED_EDGE('',*,*,#16081,.T.); +#16081 = EDGE_CURVE('',#15729,#16082,#16084,.T.); +#16082 = VERTEX_POINT('',#16083); +#16083 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16084 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16085,#16086),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16085 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#16086 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16087 = ORIENTED_EDGE('',*,*,#16088,.F.); +#16088 = EDGE_CURVE('',#15972,#16082,#16089,.T.); +#16089 = LINE('',#16090,#16091); +#16090 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16091 = VECTOR('',#16092,1.); +#16092 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16093 = ORIENTED_EDGE('',*,*,#15971,.F.); +#16094 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16095,#16096) + ,(#16097,#16098 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352846283812),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#16095 = CARTESIAN_POINT('',(1.847842035991,-2.149421017995,5.E-02)); +#16096 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16097 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#16098 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16099 = ADVANCED_FACE('',(#16100),#16111,.F.); +#16100 = FACE_BOUND('',#16101,.F.); +#16101 = EDGE_LOOP('',(#16102,#16103,#16104,#16110)); +#16102 = ORIENTED_EDGE('',*,*,#15736,.T.); +#16103 = ORIENTED_EDGE('',*,*,#16067,.T.); +#16104 = ORIENTED_EDGE('',*,*,#16105,.F.); +#16105 = EDGE_CURVE('',#16082,#16060,#16106,.T.); +#16106 = LINE('',#16107,#16108); +#16107 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16108 = VECTOR('',#16109,1.); +#16109 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16110 = ORIENTED_EDGE('',*,*,#16081,.F.); +#16111 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#16112,#16113) + ,(#16114,#16115 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.401),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#16112 = CARTESIAN_POINT('',(1.649421017995,-2.347842035991,5.E-02)); +#16113 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16114 = CARTESIAN_POINT('',(-1.649421017995,-2.347842035991,5.E-02)); +#16115 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16116 = ADVANCED_FACE('',(#16117),#16142,.T.); +#16117 = FACE_BOUND('',#16118,.T.); +#16118 = EDGE_LOOP('',(#16119,#16129,#16135,#16136)); +#16119 = ORIENTED_EDGE('',*,*,#16120,.F.); +#16120 = EDGE_CURVE('',#16121,#16123,#16125,.T.); +#16121 = VERTEX_POINT('',#16122); +#16122 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16123 = VERTEX_POINT('',#16124); +#16124 = CARTESIAN_POINT('',(1.145,-1.5,0.)); +#16125 = LINE('',#16126,#16127); +#16126 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16127 = VECTOR('',#16128,1.); +#16128 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16129 = ORIENTED_EDGE('',*,*,#16130,.T.); +#16130 = EDGE_CURVE('',#16121,#15769,#16131,.T.); +#16131 = LINE('',#16132,#16133); +#16132 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16133 = VECTOR('',#16134,1.); +#16134 = DIRECTION('',(0.,0.,1.)); +#16135 = ORIENTED_EDGE('',*,*,#15768,.T.); +#16136 = ORIENTED_EDGE('',*,*,#16137,.F.); +#16137 = EDGE_CURVE('',#16123,#15771,#16138,.T.); +#16138 = LINE('',#16139,#16140); +#16139 = CARTESIAN_POINT('',(1.145,-1.5,0.)); +#16140 = VECTOR('',#16141,1.); +#16141 = DIRECTION('',(0.,0.,1.)); +#16142 = PLANE('',#16143); +#16143 = AXIS2_PLACEMENT_3D('',#16144,#16145,#16146); +#16144 = CARTESIAN_POINT('',(1.145,1.5,0.)); +#16145 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16146 = DIRECTION('',(0.,-0.,1.)); +#16147 = ADVANCED_FACE('',(#16148),#16166,.T.); +#16148 = FACE_BOUND('',#16149,.T.); +#16149 = EDGE_LOOP('',(#16150,#16158,#16164,#16165)); +#16150 = ORIENTED_EDGE('',*,*,#16151,.F.); +#16151 = EDGE_CURVE('',#16152,#15787,#16154,.T.); +#16152 = VERTEX_POINT('',#16153); +#16153 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16154 = LINE('',#16155,#16156); +#16155 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16156 = VECTOR('',#16157,1.); +#16157 = DIRECTION('',(0.,0.,1.)); +#16158 = ORIENTED_EDGE('',*,*,#16159,.T.); +#16159 = EDGE_CURVE('',#16152,#16123,#16160,.T.); +#16160 = LINE('',#16161,#16162); +#16161 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16162 = VECTOR('',#16163,1.); +#16163 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16164 = ORIENTED_EDGE('',*,*,#16137,.T.); +#16165 = ORIENTED_EDGE('',*,*,#15794,.F.); +#16166 = PLANE('',#16167); +#16167 = AXIS2_PLACEMENT_3D('',#16168,#16169,#16170); +#16168 = CARTESIAN_POINT('',(-1.145,-1.5,0.)); +#16169 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16170 = DIRECTION('',(0.,0.,1.)); +#16171 = ADVANCED_FACE('',(#16172),#16190,.F.); +#16172 = FACE_BOUND('',#16173,.F.); +#16173 = EDGE_LOOP('',(#16174,#16182,#16188,#16189)); +#16174 = ORIENTED_EDGE('',*,*,#16175,.F.); +#16175 = EDGE_CURVE('',#16176,#16152,#16178,.T.); +#16176 = VERTEX_POINT('',#16177); +#16177 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16178 = LINE('',#16179,#16180); +#16179 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16180 = VECTOR('',#16181,1.); +#16181 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16182 = ORIENTED_EDGE('',*,*,#16183,.T.); +#16183 = EDGE_CURVE('',#16176,#15779,#16184,.T.); +#16184 = LINE('',#16185,#16186); +#16185 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16186 = VECTOR('',#16187,1.); +#16187 = DIRECTION('',(0.,0.,1.)); +#16188 = ORIENTED_EDGE('',*,*,#15786,.T.); +#16189 = ORIENTED_EDGE('',*,*,#16151,.F.); +#16190 = PLANE('',#16191); +#16191 = AXIS2_PLACEMENT_3D('',#16192,#16193,#16194); +#16192 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16193 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16194 = DIRECTION('',(0.,-0.,1.)); +#16195 = ADVANCED_FACE('',(#16196),#16207,.F.); +#16196 = FACE_BOUND('',#16197,.F.); +#16197 = EDGE_LOOP('',(#16198,#16199,#16205,#16206)); +#16198 = ORIENTED_EDGE('',*,*,#16183,.F.); +#16199 = ORIENTED_EDGE('',*,*,#16200,.T.); +#16200 = EDGE_CURVE('',#16176,#16121,#16201,.T.); +#16201 = LINE('',#16202,#16203); +#16202 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16203 = VECTOR('',#16204,1.); +#16204 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16205 = ORIENTED_EDGE('',*,*,#16130,.T.); +#16206 = ORIENTED_EDGE('',*,*,#15778,.F.); +#16207 = PLANE('',#16208); +#16208 = AXIS2_PLACEMENT_3D('',#16209,#16210,#16211); +#16209 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16210 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16211 = DIRECTION('',(0.,0.,1.)); +#16212 = ADVANCED_FACE('',(#16213),#16230,.F.); +#16213 = FACE_BOUND('',#16214,.F.); +#16214 = EDGE_LOOP('',(#16215,#16216,#16223,#16229)); +#16215 = ORIENTED_EDGE('',*,*,#15816,.T.); +#16216 = ORIENTED_EDGE('',*,*,#16217,.T.); +#16217 = EDGE_CURVE('',#15810,#16218,#16220,.T.); +#16218 = VERTEX_POINT('',#16219); +#16219 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16220 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16221,#16222),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16221 = CARTESIAN_POINT('',(1.95,2.2005,0.695)); +#16222 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16223 = ORIENTED_EDGE('',*,*,#16224,.F.); +#16224 = EDGE_CURVE('',#15833,#16218,#16225,.T.); +#16225 = LINE('',#16226,#16227); +#16226 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#16227 = VECTOR('',#16228,1.); +#16228 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16229 = ORIENTED_EDGE('',*,*,#15832,.F.); +#16230 = PLANE('',#16231); +#16231 = AXIS2_PLACEMENT_3D('',#16232,#16233,#16234); +#16232 = CARTESIAN_POINT('',(1.7005,2.45,0.905)); +#16233 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16234 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16235 = ADVANCED_FACE('',(#16236),#16318,.F.); +#16236 = FACE_BOUND('',#16237,.F.); +#16237 = EDGE_LOOP('',(#16238,#16246,#16247,#16248,#16256,#16264,#16272, + #16280,#16288,#16296,#16304,#16312)); +#16238 = ORIENTED_EDGE('',*,*,#16239,.T.); +#16239 = EDGE_CURVE('',#16240,#15840,#16242,.T.); +#16240 = VERTEX_POINT('',#16241); +#16241 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16242 = LINE('',#16243,#16244); +#16243 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16244 = VECTOR('',#16245,1.); +#16245 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16246 = ORIENTED_EDGE('',*,*,#15839,.T.); +#16247 = ORIENTED_EDGE('',*,*,#16224,.T.); +#16248 = ORIENTED_EDGE('',*,*,#16249,.T.); +#16249 = EDGE_CURVE('',#16218,#16250,#16252,.T.); +#16250 = VERTEX_POINT('',#16251); +#16251 = CARTESIAN_POINT('',(1.95,2.11,0.905)); +#16252 = LINE('',#16253,#16254); +#16253 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16254 = VECTOR('',#16255,1.); +#16255 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16256 = ORIENTED_EDGE('',*,*,#16257,.T.); +#16257 = EDGE_CURVE('',#16250,#16258,#16260,.T.); +#16258 = VERTEX_POINT('',#16259); +#16259 = CARTESIAN_POINT('',(1.9495,2.11,0.905)); +#16260 = LINE('',#16261,#16262); +#16261 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#16262 = VECTOR('',#16263,1.); +#16263 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16264 = ORIENTED_EDGE('',*,*,#16265,.F.); +#16265 = EDGE_CURVE('',#16266,#16258,#16268,.T.); +#16266 = VERTEX_POINT('',#16267); +#16267 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#16268 = LINE('',#16269,#16270); +#16269 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#16270 = VECTOR('',#16271,1.); +#16271 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16272 = ORIENTED_EDGE('',*,*,#16273,.F.); +#16273 = EDGE_CURVE('',#16274,#16266,#16276,.T.); +#16274 = VERTEX_POINT('',#16275); +#16275 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#16276 = LINE('',#16277,#16278); +#16277 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#16278 = VECTOR('',#16279,1.); +#16279 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16280 = ORIENTED_EDGE('',*,*,#16281,.F.); +#16281 = EDGE_CURVE('',#16282,#16274,#16284,.T.); +#16282 = VERTEX_POINT('',#16283); +#16283 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#16284 = LINE('',#16285,#16286); +#16285 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#16286 = VECTOR('',#16287,1.); +#16287 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16288 = ORIENTED_EDGE('',*,*,#16289,.F.); +#16289 = EDGE_CURVE('',#16290,#16282,#16292,.T.); +#16290 = VERTEX_POINT('',#16291); +#16291 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#16292 = LINE('',#16293,#16294); +#16293 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#16294 = VECTOR('',#16295,1.); +#16295 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16296 = ORIENTED_EDGE('',*,*,#16297,.F.); +#16297 = EDGE_CURVE('',#16298,#16290,#16300,.T.); +#16298 = VERTEX_POINT('',#16299); +#16299 = CARTESIAN_POINT('',(-1.9495,2.11,0.905)); +#16300 = LINE('',#16301,#16302); +#16301 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16302 = VECTOR('',#16303,1.); +#16303 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16304 = ORIENTED_EDGE('',*,*,#16305,.F.); +#16305 = EDGE_CURVE('',#16306,#16298,#16308,.T.); +#16306 = VERTEX_POINT('',#16307); +#16307 = CARTESIAN_POINT('',(-1.95,2.11,0.905)); +#16308 = LINE('',#16309,#16310); +#16309 = CARTESIAN_POINT('',(-2.25,2.11,0.905)); +#16310 = VECTOR('',#16311,1.); +#16311 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16312 = ORIENTED_EDGE('',*,*,#16313,.T.); +#16313 = EDGE_CURVE('',#16306,#16240,#16314,.T.); +#16314 = LINE('',#16315,#16316); +#16315 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16316 = VECTOR('',#16317,1.); +#16317 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16318 = PLANE('',#16319); +#16319 = AXIS2_PLACEMENT_3D('',#16320,#16321,#16322); +#16320 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#16321 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#16322 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#16323 = ADVANCED_FACE('',(#16324),#16334,.F.); +#16324 = FACE_BOUND('',#16325,.F.); +#16325 = EDGE_LOOP('',(#16326,#16327,#16328,#16329)); +#16326 = ORIENTED_EDGE('',*,*,#15862,.T.); +#16327 = ORIENTED_EDGE('',*,*,#15847,.T.); +#16328 = ORIENTED_EDGE('',*,*,#16239,.F.); +#16329 = ORIENTED_EDGE('',*,*,#16330,.F.); +#16330 = EDGE_CURVE('',#15863,#16240,#16331,.T.); +#16331 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16332,#16333),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16332 = CARTESIAN_POINT('',(-1.95,2.2005,0.695)); +#16333 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16334 = PLANE('',#16335); +#16335 = AXIS2_PLACEMENT_3D('',#16336,#16337,#16338); +#16336 = CARTESIAN_POINT('',(-1.95,2.2005,0.905)); +#16337 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#16338 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16339 = ADVANCED_FACE('',(#16340),#16364,.F.); +#16340 = FACE_BOUND('',#16341,.F.); +#16341 = EDGE_LOOP('',(#16342,#16349,#16350,#16358)); +#16342 = ORIENTED_EDGE('',*,*,#16343,.F.); +#16343 = EDGE_CURVE('',#15950,#16344,#16346,.T.); +#16344 = VERTEX_POINT('',#16345); +#16345 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16346 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16347,#16348),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16347 = CARTESIAN_POINT('',(-1.95,-2.2005,0.695)); +#16348 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16349 = ORIENTED_EDGE('',*,*,#15949,.T.); +#16350 = ORIENTED_EDGE('',*,*,#16351,.T.); +#16351 = EDGE_CURVE('',#15942,#16352,#16354,.T.); +#16352 = VERTEX_POINT('',#16353); +#16353 = CARTESIAN_POINT('',(-1.95,-2.11,0.905)); +#16354 = LINE('',#16355,#16356); +#16355 = CARTESIAN_POINT('',(-1.95,-2.11,0.679881042197)); +#16356 = VECTOR('',#16357,1.); +#16357 = DIRECTION('',(0.,0.,1.)); +#16358 = ORIENTED_EDGE('',*,*,#16359,.F.); +#16359 = EDGE_CURVE('',#16344,#16352,#16360,.T.); +#16360 = LINE('',#16361,#16362); +#16361 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16362 = VECTOR('',#16363,1.); +#16363 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16364 = PLANE('',#16365); +#16365 = AXIS2_PLACEMENT_3D('',#16366,#16367,#16368); +#16366 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16367 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16368 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16369 = ADVANCED_FACE('',(#16370),#16395,.F.); +#16370 = FACE_BOUND('',#16371,.F.); +#16371 = EDGE_LOOP('',(#16372,#16380,#16381,#16389)); +#16372 = ORIENTED_EDGE('',*,*,#16373,.F.); +#16373 = EDGE_CURVE('',#15942,#16374,#16376,.T.); +#16374 = VERTEX_POINT('',#16375); +#16375 = CARTESIAN_POINT('',(-2.25,-2.11,0.695)); +#16376 = LINE('',#16377,#16378); +#16377 = CARTESIAN_POINT('',(-1.949,-2.11,0.695)); +#16378 = VECTOR('',#16379,1.); +#16379 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16380 = ORIENTED_EDGE('',*,*,#15941,.T.); +#16381 = ORIENTED_EDGE('',*,*,#16382,.T.); +#16382 = EDGE_CURVE('',#15934,#16383,#16385,.T.); +#16383 = VERTEX_POINT('',#16384); +#16384 = CARTESIAN_POINT('',(-2.25,-1.7,0.695)); +#16385 = LINE('',#16386,#16387); +#16386 = CARTESIAN_POINT('',(-1.949,-1.7,0.695)); +#16387 = VECTOR('',#16388,1.); +#16388 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16389 = ORIENTED_EDGE('',*,*,#16390,.F.); +#16390 = EDGE_CURVE('',#16374,#16383,#16391,.T.); +#16391 = LINE('',#16392,#16393); +#16392 = CARTESIAN_POINT('',(-2.25,-2.11,0.695)); +#16393 = VECTOR('',#16394,1.); +#16394 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16395 = PLANE('',#16396); +#16396 = AXIS2_PLACEMENT_3D('',#16397,#16398,#16399); +#16397 = CARTESIAN_POINT('',(-1.949,-2.11,0.695)); +#16398 = DIRECTION('',(0.,0.,1.)); +#16399 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16400 = ADVANCED_FACE('',(#16401),#16426,.F.); +#16401 = FACE_BOUND('',#16402,.F.); +#16402 = EDGE_LOOP('',(#16403,#16411,#16412,#16420)); +#16403 = ORIENTED_EDGE('',*,*,#16404,.F.); +#16404 = EDGE_CURVE('',#15934,#16405,#16407,.T.); +#16405 = VERTEX_POINT('',#16406); +#16406 = CARTESIAN_POINT('',(-1.95,-1.7,0.905)); +#16407 = LINE('',#16408,#16409); +#16408 = CARTESIAN_POINT('',(-1.95,-1.7,0.679881042197)); +#16409 = VECTOR('',#16410,1.); +#16410 = DIRECTION('',(0.,0.,1.)); +#16411 = ORIENTED_EDGE('',*,*,#15933,.T.); +#16412 = ORIENTED_EDGE('',*,*,#16413,.T.); +#16413 = EDGE_CURVE('',#15926,#16414,#16416,.T.); +#16414 = VERTEX_POINT('',#16415); +#16415 = CARTESIAN_POINT('',(-1.95,-0.84,0.905)); +#16416 = LINE('',#16417,#16418); +#16417 = CARTESIAN_POINT('',(-1.95,-0.84,0.679881042197)); +#16418 = VECTOR('',#16419,1.); +#16419 = DIRECTION('',(0.,0.,1.)); +#16420 = ORIENTED_EDGE('',*,*,#16421,.F.); +#16421 = EDGE_CURVE('',#16405,#16414,#16422,.T.); +#16422 = LINE('',#16423,#16424); +#16423 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16424 = VECTOR('',#16425,1.); +#16425 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16426 = PLANE('',#16427); +#16427 = AXIS2_PLACEMENT_3D('',#16428,#16429,#16430); +#16428 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16429 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16430 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16431 = ADVANCED_FACE('',(#16432),#16457,.F.); +#16432 = FACE_BOUND('',#16433,.F.); +#16433 = EDGE_LOOP('',(#16434,#16442,#16443,#16451)); +#16434 = ORIENTED_EDGE('',*,*,#16435,.F.); +#16435 = EDGE_CURVE('',#15926,#16436,#16438,.T.); +#16436 = VERTEX_POINT('',#16437); +#16437 = CARTESIAN_POINT('',(-2.25,-0.84,0.695)); +#16438 = LINE('',#16439,#16440); +#16439 = CARTESIAN_POINT('',(-1.949,-0.84,0.695)); +#16440 = VECTOR('',#16441,1.); +#16441 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16442 = ORIENTED_EDGE('',*,*,#15925,.T.); +#16443 = ORIENTED_EDGE('',*,*,#16444,.T.); +#16444 = EDGE_CURVE('',#15918,#16445,#16447,.T.); +#16445 = VERTEX_POINT('',#16446); +#16446 = CARTESIAN_POINT('',(-2.25,-0.43,0.695)); +#16447 = LINE('',#16448,#16449); +#16448 = CARTESIAN_POINT('',(-1.949,-0.43,0.695)); +#16449 = VECTOR('',#16450,1.); +#16450 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16451 = ORIENTED_EDGE('',*,*,#16452,.F.); +#16452 = EDGE_CURVE('',#16436,#16445,#16453,.T.); +#16453 = LINE('',#16454,#16455); +#16454 = CARTESIAN_POINT('',(-2.25,-0.84,0.695)); +#16455 = VECTOR('',#16456,1.); +#16456 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16457 = PLANE('',#16458); +#16458 = AXIS2_PLACEMENT_3D('',#16459,#16460,#16461); +#16459 = CARTESIAN_POINT('',(-1.949,-0.84,0.695)); +#16460 = DIRECTION('',(0.,0.,1.)); +#16461 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16462 = ADVANCED_FACE('',(#16463),#16488,.F.); +#16463 = FACE_BOUND('',#16464,.F.); +#16464 = EDGE_LOOP('',(#16465,#16473,#16474,#16482)); +#16465 = ORIENTED_EDGE('',*,*,#16466,.F.); +#16466 = EDGE_CURVE('',#15918,#16467,#16469,.T.); +#16467 = VERTEX_POINT('',#16468); +#16468 = CARTESIAN_POINT('',(-1.95,-0.43,0.905)); +#16469 = LINE('',#16470,#16471); +#16470 = CARTESIAN_POINT('',(-1.95,-0.43,0.679881042197)); +#16471 = VECTOR('',#16472,1.); +#16472 = DIRECTION('',(0.,0.,1.)); +#16473 = ORIENTED_EDGE('',*,*,#15917,.T.); +#16474 = ORIENTED_EDGE('',*,*,#16475,.T.); +#16475 = EDGE_CURVE('',#15910,#16476,#16478,.T.); +#16476 = VERTEX_POINT('',#16477); +#16477 = CARTESIAN_POINT('',(-1.95,0.43,0.905)); +#16478 = LINE('',#16479,#16480); +#16479 = CARTESIAN_POINT('',(-1.95,0.43,0.679881042197)); +#16480 = VECTOR('',#16481,1.); +#16481 = DIRECTION('',(0.,0.,1.)); +#16482 = ORIENTED_EDGE('',*,*,#16483,.F.); +#16483 = EDGE_CURVE('',#16467,#16476,#16484,.T.); +#16484 = LINE('',#16485,#16486); +#16485 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16486 = VECTOR('',#16487,1.); +#16487 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16488 = PLANE('',#16489); +#16489 = AXIS2_PLACEMENT_3D('',#16490,#16491,#16492); +#16490 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16491 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16492 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16493 = ADVANCED_FACE('',(#16494),#16519,.F.); +#16494 = FACE_BOUND('',#16495,.F.); +#16495 = EDGE_LOOP('',(#16496,#16504,#16505,#16513)); +#16496 = ORIENTED_EDGE('',*,*,#16497,.F.); +#16497 = EDGE_CURVE('',#15910,#16498,#16500,.T.); +#16498 = VERTEX_POINT('',#16499); +#16499 = CARTESIAN_POINT('',(-2.25,0.43,0.695)); +#16500 = LINE('',#16501,#16502); +#16501 = CARTESIAN_POINT('',(-1.949,0.43,0.695)); +#16502 = VECTOR('',#16503,1.); +#16503 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16504 = ORIENTED_EDGE('',*,*,#15909,.T.); +#16505 = ORIENTED_EDGE('',*,*,#16506,.T.); +#16506 = EDGE_CURVE('',#15902,#16507,#16509,.T.); +#16507 = VERTEX_POINT('',#16508); +#16508 = CARTESIAN_POINT('',(-2.25,0.84,0.695)); +#16509 = LINE('',#16510,#16511); +#16510 = CARTESIAN_POINT('',(-1.949,0.84,0.695)); +#16511 = VECTOR('',#16512,1.); +#16512 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16513 = ORIENTED_EDGE('',*,*,#16514,.F.); +#16514 = EDGE_CURVE('',#16498,#16507,#16515,.T.); +#16515 = LINE('',#16516,#16517); +#16516 = CARTESIAN_POINT('',(-2.25,0.43,0.695)); +#16517 = VECTOR('',#16518,1.); +#16518 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16519 = PLANE('',#16520); +#16520 = AXIS2_PLACEMENT_3D('',#16521,#16522,#16523); +#16521 = CARTESIAN_POINT('',(-1.949,0.43,0.695)); +#16522 = DIRECTION('',(0.,0.,1.)); +#16523 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16524 = ADVANCED_FACE('',(#16525),#16550,.F.); +#16525 = FACE_BOUND('',#16526,.F.); +#16526 = EDGE_LOOP('',(#16527,#16535,#16536,#16544)); +#16527 = ORIENTED_EDGE('',*,*,#16528,.F.); +#16528 = EDGE_CURVE('',#15902,#16529,#16531,.T.); +#16529 = VERTEX_POINT('',#16530); +#16530 = CARTESIAN_POINT('',(-1.95,0.84,0.905)); +#16531 = LINE('',#16532,#16533); +#16532 = CARTESIAN_POINT('',(-1.95,0.84,0.679881042197)); +#16533 = VECTOR('',#16534,1.); +#16534 = DIRECTION('',(0.,0.,1.)); +#16535 = ORIENTED_EDGE('',*,*,#15901,.T.); +#16536 = ORIENTED_EDGE('',*,*,#16537,.T.); +#16537 = EDGE_CURVE('',#15894,#16538,#16540,.T.); +#16538 = VERTEX_POINT('',#16539); +#16539 = CARTESIAN_POINT('',(-1.95,1.7,0.905)); +#16540 = LINE('',#16541,#16542); +#16541 = CARTESIAN_POINT('',(-1.95,1.7,0.679881042197)); +#16542 = VECTOR('',#16543,1.); +#16543 = DIRECTION('',(0.,0.,1.)); +#16544 = ORIENTED_EDGE('',*,*,#16545,.F.); +#16545 = EDGE_CURVE('',#16529,#16538,#16546,.T.); +#16546 = LINE('',#16547,#16548); +#16547 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16548 = VECTOR('',#16549,1.); +#16549 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16550 = PLANE('',#16551); +#16551 = AXIS2_PLACEMENT_3D('',#16552,#16553,#16554); +#16552 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16553 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16554 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16555 = ADVANCED_FACE('',(#16556),#16581,.F.); +#16556 = FACE_BOUND('',#16557,.F.); +#16557 = EDGE_LOOP('',(#16558,#16566,#16567,#16575)); +#16558 = ORIENTED_EDGE('',*,*,#16559,.F.); +#16559 = EDGE_CURVE('',#15894,#16560,#16562,.T.); +#16560 = VERTEX_POINT('',#16561); +#16561 = CARTESIAN_POINT('',(-2.25,1.7,0.695)); +#16562 = LINE('',#16563,#16564); +#16563 = CARTESIAN_POINT('',(-1.949,1.7,0.695)); +#16564 = VECTOR('',#16565,1.); +#16565 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16566 = ORIENTED_EDGE('',*,*,#15893,.T.); +#16567 = ORIENTED_EDGE('',*,*,#16568,.T.); +#16568 = EDGE_CURVE('',#15886,#16569,#16571,.T.); +#16569 = VERTEX_POINT('',#16570); +#16570 = CARTESIAN_POINT('',(-2.25,2.11,0.695)); +#16571 = LINE('',#16572,#16573); +#16572 = CARTESIAN_POINT('',(-1.949,2.11,0.695)); +#16573 = VECTOR('',#16574,1.); +#16574 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16575 = ORIENTED_EDGE('',*,*,#16576,.F.); +#16576 = EDGE_CURVE('',#16560,#16569,#16577,.T.); +#16577 = LINE('',#16578,#16579); +#16578 = CARTESIAN_POINT('',(-2.25,1.7,0.695)); +#16579 = VECTOR('',#16580,1.); +#16580 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16581 = PLANE('',#16582); +#16582 = AXIS2_PLACEMENT_3D('',#16583,#16584,#16585); +#16583 = CARTESIAN_POINT('',(-1.949,1.7,0.695)); +#16584 = DIRECTION('',(0.,0.,1.)); +#16585 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#16586 = ADVANCED_FACE('',(#16587),#16598,.F.); +#16587 = FACE_BOUND('',#16588,.F.); +#16588 = EDGE_LOOP('',(#16589,#16595,#16596,#16597)); +#16589 = ORIENTED_EDGE('',*,*,#16590,.F.); +#16590 = EDGE_CURVE('',#15886,#16306,#16591,.T.); +#16591 = LINE('',#16592,#16593); +#16592 = CARTESIAN_POINT('',(-1.95,2.11,0.679881042197)); +#16593 = VECTOR('',#16594,1.); +#16594 = DIRECTION('',(0.,0.,1.)); +#16595 = ORIENTED_EDGE('',*,*,#15885,.T.); +#16596 = ORIENTED_EDGE('',*,*,#16330,.T.); +#16597 = ORIENTED_EDGE('',*,*,#16313,.F.); +#16598 = PLANE('',#16599); +#16599 = AXIS2_PLACEMENT_3D('',#16600,#16601,#16602); +#16600 = CARTESIAN_POINT('',(-1.95,-2.2005,0.905)); +#16601 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16602 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16603 = ADVANCED_FACE('',(#16604),#16615,.F.); +#16604 = FACE_BOUND('',#16605,.F.); +#16605 = EDGE_LOOP('',(#16606,#16607,#16608,#16614)); +#16606 = ORIENTED_EDGE('',*,*,#16217,.F.); +#16607 = ORIENTED_EDGE('',*,*,#16042,.T.); +#16608 = ORIENTED_EDGE('',*,*,#16609,.T.); +#16609 = EDGE_CURVE('',#16035,#16250,#16610,.T.); +#16610 = LINE('',#16611,#16612); +#16611 = CARTESIAN_POINT('',(1.95,2.11,0.679881042197)); +#16612 = VECTOR('',#16613,1.); +#16613 = DIRECTION('',(0.,0.,1.)); +#16614 = ORIENTED_EDGE('',*,*,#16249,.F.); +#16615 = PLANE('',#16616); +#16616 = AXIS2_PLACEMENT_3D('',#16617,#16618,#16619); +#16617 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16618 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16619 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16620 = ADVANCED_FACE('',(#16621),#16646,.F.); +#16621 = FACE_BOUND('',#16622,.F.); +#16622 = EDGE_LOOP('',(#16623,#16631,#16632,#16640)); +#16623 = ORIENTED_EDGE('',*,*,#16624,.F.); +#16624 = EDGE_CURVE('',#16035,#16625,#16627,.T.); +#16625 = VERTEX_POINT('',#16626); +#16626 = CARTESIAN_POINT('',(2.25,2.11,0.695)); +#16627 = LINE('',#16628,#16629); +#16628 = CARTESIAN_POINT('',(1.949,2.11,0.695)); +#16629 = VECTOR('',#16630,1.); +#16630 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16631 = ORIENTED_EDGE('',*,*,#16034,.T.); +#16632 = ORIENTED_EDGE('',*,*,#16633,.T.); +#16633 = EDGE_CURVE('',#16027,#16634,#16636,.T.); +#16634 = VERTEX_POINT('',#16635); +#16635 = CARTESIAN_POINT('',(2.25,1.7,0.695)); +#16636 = LINE('',#16637,#16638); +#16637 = CARTESIAN_POINT('',(1.949,1.7,0.695)); +#16638 = VECTOR('',#16639,1.); +#16639 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16640 = ORIENTED_EDGE('',*,*,#16641,.F.); +#16641 = EDGE_CURVE('',#16625,#16634,#16642,.T.); +#16642 = LINE('',#16643,#16644); +#16643 = CARTESIAN_POINT('',(2.25,2.11,0.695)); +#16644 = VECTOR('',#16645,1.); +#16645 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16646 = PLANE('',#16647); +#16647 = AXIS2_PLACEMENT_3D('',#16648,#16649,#16650); +#16648 = CARTESIAN_POINT('',(1.949,2.11,0.695)); +#16649 = DIRECTION('',(0.,0.,1.)); +#16650 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16651 = ADVANCED_FACE('',(#16652),#16677,.F.); +#16652 = FACE_BOUND('',#16653,.F.); +#16653 = EDGE_LOOP('',(#16654,#16662,#16663,#16671)); +#16654 = ORIENTED_EDGE('',*,*,#16655,.F.); +#16655 = EDGE_CURVE('',#16027,#16656,#16658,.T.); +#16656 = VERTEX_POINT('',#16657); +#16657 = CARTESIAN_POINT('',(1.95,1.7,0.905)); +#16658 = LINE('',#16659,#16660); +#16659 = CARTESIAN_POINT('',(1.95,1.7,0.679881042197)); +#16660 = VECTOR('',#16661,1.); +#16661 = DIRECTION('',(0.,0.,1.)); +#16662 = ORIENTED_EDGE('',*,*,#16026,.T.); +#16663 = ORIENTED_EDGE('',*,*,#16664,.T.); +#16664 = EDGE_CURVE('',#16019,#16665,#16667,.T.); +#16665 = VERTEX_POINT('',#16666); +#16666 = CARTESIAN_POINT('',(1.95,0.84,0.905)); +#16667 = LINE('',#16668,#16669); +#16668 = CARTESIAN_POINT('',(1.95,0.84,0.679881042197)); +#16669 = VECTOR('',#16670,1.); +#16670 = DIRECTION('',(0.,0.,1.)); +#16671 = ORIENTED_EDGE('',*,*,#16672,.F.); +#16672 = EDGE_CURVE('',#16656,#16665,#16673,.T.); +#16673 = LINE('',#16674,#16675); +#16674 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16675 = VECTOR('',#16676,1.); +#16676 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16677 = PLANE('',#16678); +#16678 = AXIS2_PLACEMENT_3D('',#16679,#16680,#16681); +#16679 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16680 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16681 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16682 = ADVANCED_FACE('',(#16683),#16708,.F.); +#16683 = FACE_BOUND('',#16684,.F.); +#16684 = EDGE_LOOP('',(#16685,#16693,#16694,#16702)); +#16685 = ORIENTED_EDGE('',*,*,#16686,.F.); +#16686 = EDGE_CURVE('',#16019,#16687,#16689,.T.); +#16687 = VERTEX_POINT('',#16688); +#16688 = CARTESIAN_POINT('',(2.25,0.84,0.695)); +#16689 = LINE('',#16690,#16691); +#16690 = CARTESIAN_POINT('',(1.949,0.84,0.695)); +#16691 = VECTOR('',#16692,1.); +#16692 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16693 = ORIENTED_EDGE('',*,*,#16018,.T.); +#16694 = ORIENTED_EDGE('',*,*,#16695,.T.); +#16695 = EDGE_CURVE('',#16011,#16696,#16698,.T.); +#16696 = VERTEX_POINT('',#16697); +#16697 = CARTESIAN_POINT('',(2.25,0.43,0.695)); +#16698 = LINE('',#16699,#16700); +#16699 = CARTESIAN_POINT('',(1.949,0.43,0.695)); +#16700 = VECTOR('',#16701,1.); +#16701 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16702 = ORIENTED_EDGE('',*,*,#16703,.F.); +#16703 = EDGE_CURVE('',#16687,#16696,#16704,.T.); +#16704 = LINE('',#16705,#16706); +#16705 = CARTESIAN_POINT('',(2.25,0.84,0.695)); +#16706 = VECTOR('',#16707,1.); +#16707 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16708 = PLANE('',#16709); +#16709 = AXIS2_PLACEMENT_3D('',#16710,#16711,#16712); +#16710 = CARTESIAN_POINT('',(1.949,0.84,0.695)); +#16711 = DIRECTION('',(0.,0.,1.)); +#16712 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16713 = ADVANCED_FACE('',(#16714),#16739,.F.); +#16714 = FACE_BOUND('',#16715,.F.); +#16715 = EDGE_LOOP('',(#16716,#16724,#16725,#16733)); +#16716 = ORIENTED_EDGE('',*,*,#16717,.F.); +#16717 = EDGE_CURVE('',#16011,#16718,#16720,.T.); +#16718 = VERTEX_POINT('',#16719); +#16719 = CARTESIAN_POINT('',(1.95,0.43,0.905)); +#16720 = LINE('',#16721,#16722); +#16721 = CARTESIAN_POINT('',(1.95,0.43,0.679881042197)); +#16722 = VECTOR('',#16723,1.); +#16723 = DIRECTION('',(0.,0.,1.)); +#16724 = ORIENTED_EDGE('',*,*,#16010,.T.); +#16725 = ORIENTED_EDGE('',*,*,#16726,.T.); +#16726 = EDGE_CURVE('',#16003,#16727,#16729,.T.); +#16727 = VERTEX_POINT('',#16728); +#16728 = CARTESIAN_POINT('',(1.95,-0.43,0.905)); +#16729 = LINE('',#16730,#16731); +#16730 = CARTESIAN_POINT('',(1.95,-0.43,0.679881042197)); +#16731 = VECTOR('',#16732,1.); +#16732 = DIRECTION('',(0.,0.,1.)); +#16733 = ORIENTED_EDGE('',*,*,#16734,.F.); +#16734 = EDGE_CURVE('',#16718,#16727,#16735,.T.); +#16735 = LINE('',#16736,#16737); +#16736 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16737 = VECTOR('',#16738,1.); +#16738 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16739 = PLANE('',#16740); +#16740 = AXIS2_PLACEMENT_3D('',#16741,#16742,#16743); +#16741 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16742 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16743 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16744 = ADVANCED_FACE('',(#16745),#16770,.F.); +#16745 = FACE_BOUND('',#16746,.F.); +#16746 = EDGE_LOOP('',(#16747,#16755,#16756,#16764)); +#16747 = ORIENTED_EDGE('',*,*,#16748,.F.); +#16748 = EDGE_CURVE('',#16003,#16749,#16751,.T.); +#16749 = VERTEX_POINT('',#16750); +#16750 = CARTESIAN_POINT('',(2.25,-0.43,0.695)); +#16751 = LINE('',#16752,#16753); +#16752 = CARTESIAN_POINT('',(1.949,-0.43,0.695)); +#16753 = VECTOR('',#16754,1.); +#16754 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16755 = ORIENTED_EDGE('',*,*,#16002,.T.); +#16756 = ORIENTED_EDGE('',*,*,#16757,.T.); +#16757 = EDGE_CURVE('',#15995,#16758,#16760,.T.); +#16758 = VERTEX_POINT('',#16759); +#16759 = CARTESIAN_POINT('',(2.25,-0.84,0.695)); +#16760 = LINE('',#16761,#16762); +#16761 = CARTESIAN_POINT('',(1.949,-0.84,0.695)); +#16762 = VECTOR('',#16763,1.); +#16763 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16764 = ORIENTED_EDGE('',*,*,#16765,.F.); +#16765 = EDGE_CURVE('',#16749,#16758,#16766,.T.); +#16766 = LINE('',#16767,#16768); +#16767 = CARTESIAN_POINT('',(2.25,-0.43,0.695)); +#16768 = VECTOR('',#16769,1.); +#16769 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16770 = PLANE('',#16771); +#16771 = AXIS2_PLACEMENT_3D('',#16772,#16773,#16774); +#16772 = CARTESIAN_POINT('',(1.949,-0.43,0.695)); +#16773 = DIRECTION('',(0.,0.,1.)); +#16774 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16775 = ADVANCED_FACE('',(#16776),#16801,.F.); +#16776 = FACE_BOUND('',#16777,.F.); +#16777 = EDGE_LOOP('',(#16778,#16786,#16787,#16795)); +#16778 = ORIENTED_EDGE('',*,*,#16779,.F.); +#16779 = EDGE_CURVE('',#15995,#16780,#16782,.T.); +#16780 = VERTEX_POINT('',#16781); +#16781 = CARTESIAN_POINT('',(1.95,-0.84,0.905)); +#16782 = LINE('',#16783,#16784); +#16783 = CARTESIAN_POINT('',(1.95,-0.84,0.679881042197)); +#16784 = VECTOR('',#16785,1.); +#16785 = DIRECTION('',(0.,0.,1.)); +#16786 = ORIENTED_EDGE('',*,*,#15994,.T.); +#16787 = ORIENTED_EDGE('',*,*,#16788,.T.); +#16788 = EDGE_CURVE('',#15987,#16789,#16791,.T.); +#16789 = VERTEX_POINT('',#16790); +#16790 = CARTESIAN_POINT('',(1.95,-1.7,0.905)); +#16791 = LINE('',#16792,#16793); +#16792 = CARTESIAN_POINT('',(1.95,-1.7,0.679881042197)); +#16793 = VECTOR('',#16794,1.); +#16794 = DIRECTION('',(0.,0.,1.)); +#16795 = ORIENTED_EDGE('',*,*,#16796,.F.); +#16796 = EDGE_CURVE('',#16780,#16789,#16797,.T.); +#16797 = LINE('',#16798,#16799); +#16798 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16799 = VECTOR('',#16800,1.); +#16800 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16801 = PLANE('',#16802); +#16802 = AXIS2_PLACEMENT_3D('',#16803,#16804,#16805); +#16803 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16804 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16805 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16806 = ADVANCED_FACE('',(#16807),#16832,.F.); +#16807 = FACE_BOUND('',#16808,.F.); +#16808 = EDGE_LOOP('',(#16809,#16817,#16818,#16826)); +#16809 = ORIENTED_EDGE('',*,*,#16810,.F.); +#16810 = EDGE_CURVE('',#15987,#16811,#16813,.T.); +#16811 = VERTEX_POINT('',#16812); +#16812 = CARTESIAN_POINT('',(2.25,-1.7,0.695)); +#16813 = LINE('',#16814,#16815); +#16814 = CARTESIAN_POINT('',(1.949,-1.7,0.695)); +#16815 = VECTOR('',#16816,1.); +#16816 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16817 = ORIENTED_EDGE('',*,*,#15986,.T.); +#16818 = ORIENTED_EDGE('',*,*,#16819,.T.); +#16819 = EDGE_CURVE('',#15979,#16820,#16822,.T.); +#16820 = VERTEX_POINT('',#16821); +#16821 = CARTESIAN_POINT('',(2.25,-2.11,0.695)); +#16822 = LINE('',#16823,#16824); +#16823 = CARTESIAN_POINT('',(1.949,-2.11,0.695)); +#16824 = VECTOR('',#16825,1.); +#16825 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#16826 = ORIENTED_EDGE('',*,*,#16827,.F.); +#16827 = EDGE_CURVE('',#16811,#16820,#16828,.T.); +#16828 = LINE('',#16829,#16830); +#16829 = CARTESIAN_POINT('',(2.25,-1.7,0.695)); +#16830 = VECTOR('',#16831,1.); +#16831 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16832 = PLANE('',#16833); +#16833 = AXIS2_PLACEMENT_3D('',#16834,#16835,#16836); +#16834 = CARTESIAN_POINT('',(1.949,-1.7,0.695)); +#16835 = DIRECTION('',(0.,0.,1.)); +#16836 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#16837 = ADVANCED_FACE('',(#16838),#16862,.F.); +#16838 = FACE_BOUND('',#16839,.F.); +#16839 = EDGE_LOOP('',(#16840,#16848,#16849,#16856)); +#16840 = ORIENTED_EDGE('',*,*,#16841,.F.); +#16841 = EDGE_CURVE('',#15979,#16842,#16844,.T.); +#16842 = VERTEX_POINT('',#16843); +#16843 = CARTESIAN_POINT('',(1.95,-2.11,0.905)); +#16844 = LINE('',#16845,#16846); +#16845 = CARTESIAN_POINT('',(1.95,-2.11,0.679881042197)); +#16846 = VECTOR('',#16847,1.); +#16847 = DIRECTION('',(0.,0.,1.)); +#16848 = ORIENTED_EDGE('',*,*,#15978,.T.); +#16849 = ORIENTED_EDGE('',*,*,#16850,.T.); +#16850 = EDGE_CURVE('',#15972,#16851,#16853,.T.); +#16851 = VERTEX_POINT('',#16852); +#16852 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16853 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16854,#16855),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16854 = CARTESIAN_POINT('',(1.95,-2.2005,0.695)); +#16855 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16856 = ORIENTED_EDGE('',*,*,#16857,.F.); +#16857 = EDGE_CURVE('',#16842,#16851,#16858,.T.); +#16858 = LINE('',#16859,#16860); +#16859 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16860 = VECTOR('',#16861,1.); +#16861 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16862 = PLANE('',#16863); +#16863 = AXIS2_PLACEMENT_3D('',#16864,#16865,#16866); +#16864 = CARTESIAN_POINT('',(1.95,2.2005,0.905)); +#16865 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16866 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16867 = ADVANCED_FACE('',(#16868),#16885,.F.); +#16868 = FACE_BOUND('',#16869,.F.); +#16869 = EDGE_LOOP('',(#16870,#16871,#16872,#16880)); +#16870 = ORIENTED_EDGE('',*,*,#16059,.T.); +#16871 = ORIENTED_EDGE('',*,*,#16343,.T.); +#16872 = ORIENTED_EDGE('',*,*,#16873,.F.); +#16873 = EDGE_CURVE('',#16874,#16344,#16876,.T.); +#16874 = VERTEX_POINT('',#16875); +#16875 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16876 = LINE('',#16877,#16878); +#16877 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16878 = VECTOR('',#16879,1.); +#16879 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16880 = ORIENTED_EDGE('',*,*,#16881,.F.); +#16881 = EDGE_CURVE('',#16060,#16874,#16882,.T.); +#16882 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16883,#16884),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16883 = CARTESIAN_POINT('',(-1.7005,-2.45,0.695)); +#16884 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16885 = PLANE('',#16886); +#16886 = AXIS2_PLACEMENT_3D('',#16887,#16888,#16889); +#16887 = CARTESIAN_POINT('',(-1.7005,-2.45,0.905)); +#16888 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#16889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16890 = ADVANCED_FACE('',(#16891),#16908,.F.); +#16891 = FACE_BOUND('',#16892,.F.); +#16892 = EDGE_LOOP('',(#16893,#16894,#16901,#16907)); +#16893 = ORIENTED_EDGE('',*,*,#16088,.T.); +#16894 = ORIENTED_EDGE('',*,*,#16895,.T.); +#16895 = EDGE_CURVE('',#16082,#16896,#16898,.T.); +#16896 = VERTEX_POINT('',#16897); +#16897 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16898 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16899,#16900),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#16899 = CARTESIAN_POINT('',(1.7005,-2.45,0.695)); +#16900 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16901 = ORIENTED_EDGE('',*,*,#16902,.F.); +#16902 = EDGE_CURVE('',#16851,#16896,#16903,.T.); +#16903 = LINE('',#16904,#16905); +#16904 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16905 = VECTOR('',#16906,1.); +#16906 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16907 = ORIENTED_EDGE('',*,*,#16850,.F.); +#16908 = PLANE('',#16909); +#16909 = AXIS2_PLACEMENT_3D('',#16910,#16911,#16912); +#16910 = CARTESIAN_POINT('',(1.95,-2.2005,0.905)); +#16911 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#16912 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#16913 = ADVANCED_FACE('',(#16914),#16925,.F.); +#16914 = FACE_BOUND('',#16915,.F.); +#16915 = EDGE_LOOP('',(#16916,#16917,#16918,#16924)); +#16916 = ORIENTED_EDGE('',*,*,#16105,.T.); +#16917 = ORIENTED_EDGE('',*,*,#16881,.T.); +#16918 = ORIENTED_EDGE('',*,*,#16919,.F.); +#16919 = EDGE_CURVE('',#16896,#16874,#16920,.T.); +#16920 = LINE('',#16921,#16922); +#16921 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16922 = VECTOR('',#16923,1.); +#16923 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16924 = ORIENTED_EDGE('',*,*,#16895,.F.); +#16925 = PLANE('',#16926); +#16926 = AXIS2_PLACEMENT_3D('',#16927,#16928,#16929); +#16927 = CARTESIAN_POINT('',(1.7005,-2.45,0.905)); +#16928 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16929 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#16930 = ADVANCED_FACE('',(#16931),#16937,.F.); +#16931 = FACE_BOUND('',#16932,.F.); +#16932 = EDGE_LOOP('',(#16933,#16934,#16935,#16936)); +#16933 = ORIENTED_EDGE('',*,*,#16200,.F.); +#16934 = ORIENTED_EDGE('',*,*,#16175,.T.); +#16935 = ORIENTED_EDGE('',*,*,#16159,.T.); +#16936 = ORIENTED_EDGE('',*,*,#16120,.F.); +#16937 = PLANE('',#16938); +#16938 = AXIS2_PLACEMENT_3D('',#16939,#16940,#16941); +#16939 = CARTESIAN_POINT('',(-1.145,1.5,0.)); +#16940 = DIRECTION('',(0.,0.,1.)); +#16941 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#16942 = ADVANCED_FACE('',(#16943),#16982,.F.); +#16943 = FACE_BOUND('',#16944,.F.); +#16944 = EDGE_LOOP('',(#16945,#16953,#16961,#16967,#16968,#16976)); +#16945 = ORIENTED_EDGE('',*,*,#16946,.F.); +#16946 = EDGE_CURVE('',#16947,#16538,#16949,.T.); +#16947 = VERTEX_POINT('',#16948); +#16948 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16949 = LINE('',#16950,#16951); +#16950 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16951 = VECTOR('',#16952,1.); +#16952 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16953 = ORIENTED_EDGE('',*,*,#16954,.T.); +#16954 = EDGE_CURVE('',#16947,#16955,#16957,.T.); +#16955 = VERTEX_POINT('',#16956); +#16956 = CARTESIAN_POINT('',(-2.25,2.11,0.905)); +#16957 = LINE('',#16958,#16959); +#16958 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16959 = VECTOR('',#16960,1.); +#16960 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#16961 = ORIENTED_EDGE('',*,*,#16962,.T.); +#16962 = EDGE_CURVE('',#16955,#16306,#16963,.T.); +#16963 = LINE('',#16964,#16965); +#16964 = CARTESIAN_POINT('',(-2.25,2.11,0.905)); +#16965 = VECTOR('',#16966,1.); +#16966 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16967 = ORIENTED_EDGE('',*,*,#16305,.T.); +#16968 = ORIENTED_EDGE('',*,*,#16969,.F.); +#16969 = EDGE_CURVE('',#16970,#16298,#16972,.T.); +#16970 = VERTEX_POINT('',#16971); +#16971 = CARTESIAN_POINT('',(-1.9495,1.7,0.905)); +#16972 = LINE('',#16973,#16974); +#16973 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16974 = VECTOR('',#16975,1.); +#16975 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#16976 = ORIENTED_EDGE('',*,*,#16977,.F.); +#16977 = EDGE_CURVE('',#16538,#16970,#16978,.T.); +#16978 = LINE('',#16979,#16980); +#16979 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16980 = VECTOR('',#16981,1.); +#16981 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16982 = PLANE('',#16983); +#16983 = AXIS2_PLACEMENT_3D('',#16984,#16985,#16986); +#16984 = CARTESIAN_POINT('',(-2.25,1.7,0.905)); +#16985 = DIRECTION('',(0.,0.,-1.)); +#16986 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#16987 = ADVANCED_FACE('',(#16988),#17068,.F.); +#16988 = FACE_BOUND('',#16989,.F.); +#16989 = EDGE_LOOP('',(#16990,#17000,#17008,#17016,#17024,#17032,#17040, + #17046,#17047,#17048,#17055,#17063)); +#16990 = ORIENTED_EDGE('',*,*,#16991,.T.); +#16991 = EDGE_CURVE('',#16992,#16994,#16996,.T.); +#16992 = VERTEX_POINT('',#16993); +#16993 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16994 = VERTEX_POINT('',#16995); +#16995 = CARTESIAN_POINT('',(-1.9495,-2.11,0.905)); +#16996 = LINE('',#16997,#16998); +#16997 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#16998 = VECTOR('',#16999,1.); +#16999 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17000 = ORIENTED_EDGE('',*,*,#17001,.T.); +#17001 = EDGE_CURVE('',#16994,#17002,#17004,.T.); +#17002 = VERTEX_POINT('',#17003); +#17003 = CARTESIAN_POINT('',(-1.9495,-1.7,0.905)); +#17004 = LINE('',#17005,#17006); +#17005 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17006 = VECTOR('',#17007,1.); +#17007 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17008 = ORIENTED_EDGE('',*,*,#17009,.T.); +#17009 = EDGE_CURVE('',#17002,#17010,#17012,.T.); +#17010 = VERTEX_POINT('',#17011); +#17011 = CARTESIAN_POINT('',(-1.9495,-0.84,0.905)); +#17012 = LINE('',#17013,#17014); +#17013 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17014 = VECTOR('',#17015,1.); +#17015 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17016 = ORIENTED_EDGE('',*,*,#17017,.T.); +#17017 = EDGE_CURVE('',#17010,#17018,#17020,.T.); +#17018 = VERTEX_POINT('',#17019); +#17019 = CARTESIAN_POINT('',(-1.9495,-0.43,0.905)); +#17020 = LINE('',#17021,#17022); +#17021 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17022 = VECTOR('',#17023,1.); +#17023 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17024 = ORIENTED_EDGE('',*,*,#17025,.T.); +#17025 = EDGE_CURVE('',#17018,#17026,#17028,.T.); +#17026 = VERTEX_POINT('',#17027); +#17027 = CARTESIAN_POINT('',(-1.9495,0.43,0.905)); +#17028 = LINE('',#17029,#17030); +#17029 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17030 = VECTOR('',#17031,1.); +#17031 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17032 = ORIENTED_EDGE('',*,*,#17033,.T.); +#17033 = EDGE_CURVE('',#17026,#17034,#17036,.T.); +#17034 = VERTEX_POINT('',#17035); +#17035 = CARTESIAN_POINT('',(-1.9495,0.84,0.905)); +#17036 = LINE('',#17037,#17038); +#17037 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17038 = VECTOR('',#17039,1.); +#17039 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17040 = ORIENTED_EDGE('',*,*,#17041,.T.); +#17041 = EDGE_CURVE('',#17034,#16970,#17042,.T.); +#17042 = LINE('',#17043,#17044); +#17043 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17044 = VECTOR('',#17045,1.); +#17045 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17046 = ORIENTED_EDGE('',*,*,#16969,.T.); +#17047 = ORIENTED_EDGE('',*,*,#16297,.T.); +#17048 = ORIENTED_EDGE('',*,*,#17049,.T.); +#17049 = EDGE_CURVE('',#16290,#17050,#17052,.T.); +#17050 = VERTEX_POINT('',#17051); +#17051 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17052 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17053,#17054),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17053 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#17054 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17055 = ORIENTED_EDGE('',*,*,#17056,.F.); +#17056 = EDGE_CURVE('',#17057,#17050,#17059,.T.); +#17057 = VERTEX_POINT('',#17058); +#17058 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17059 = LINE('',#17060,#17061); +#17060 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17061 = VECTOR('',#17062,1.); +#17062 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#17063 = ORIENTED_EDGE('',*,*,#17064,.F.); +#17064 = EDGE_CURVE('',#16992,#17057,#17065,.T.); +#17065 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17066,#17067),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17066 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17067 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17068 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17069,#17070) + ,(#17071,#17072 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#17069 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#17070 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#17071 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#17072 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17073 = ADVANCED_FACE('',(#17074),#17091,.F.); +#17074 = FACE_BOUND('',#17075,.F.); +#17075 = EDGE_LOOP('',(#17076,#17077,#17084,#17090)); +#17076 = ORIENTED_EDGE('',*,*,#16289,.T.); +#17077 = ORIENTED_EDGE('',*,*,#17078,.T.); +#17078 = EDGE_CURVE('',#16282,#17079,#17081,.T.); +#17079 = VERTEX_POINT('',#17080); +#17080 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17082,#17083),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17082 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#17083 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17084 = ORIENTED_EDGE('',*,*,#17085,.F.); +#17085 = EDGE_CURVE('',#17050,#17079,#17086,.T.); +#17086 = LINE('',#17087,#17088); +#17087 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17088 = VECTOR('',#17089,1.); +#17089 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#17090 = ORIENTED_EDGE('',*,*,#17049,.F.); +#17091 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17092,#17093) + ,(#17094,#17095 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#17092 = CARTESIAN_POINT('',(-1.9495,2.20025,0.905)); +#17093 = CARTESIAN_POINT('',(-1.847342035991,2.149171017995,1.55)); +#17094 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#17095 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17096 = ADVANCED_FACE('',(#17097),#17114,.F.); +#17097 = FACE_BOUND('',#17098,.F.); +#17098 = EDGE_LOOP('',(#17099,#17100,#17107,#17113)); +#17099 = ORIENTED_EDGE('',*,*,#16281,.T.); +#17100 = ORIENTED_EDGE('',*,*,#17101,.T.); +#17101 = EDGE_CURVE('',#16274,#17102,#17104,.T.); +#17102 = VERTEX_POINT('',#17103); +#17103 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17104 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17105,#17106),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17105 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#17106 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17107 = ORIENTED_EDGE('',*,*,#17108,.F.); +#17108 = EDGE_CURVE('',#17079,#17102,#17109,.T.); +#17109 = LINE('',#17110,#17111); +#17110 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17111 = VECTOR('',#17112,1.); +#17112 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#17113 = ORIENTED_EDGE('',*,*,#17078,.F.); +#17114 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17115,#17116) + ,(#17117,#17118 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#17115 = CARTESIAN_POINT('',(-1.70025,2.4495,0.905)); +#17116 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#17117 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#17118 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17119 = ADVANCED_FACE('',(#17120),#17137,.F.); +#17120 = FACE_BOUND('',#17121,.F.); +#17121 = EDGE_LOOP('',(#17122,#17123,#17130,#17136)); +#17122 = ORIENTED_EDGE('',*,*,#16273,.T.); +#17123 = ORIENTED_EDGE('',*,*,#17124,.T.); +#17124 = EDGE_CURVE('',#16266,#17125,#17127,.T.); +#17125 = VERTEX_POINT('',#17126); +#17126 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17127 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17128,#17129),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17128 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17129 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17130 = ORIENTED_EDGE('',*,*,#17131,.F.); +#17131 = EDGE_CURVE('',#17102,#17125,#17132,.T.); +#17132 = LINE('',#17133,#17134); +#17133 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17134 = VECTOR('',#17135,1.); +#17135 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#17136 = ORIENTED_EDGE('',*,*,#17101,.F.); +#17137 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17138,#17139) + ,(#17140,#17141 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#17138 = CARTESIAN_POINT('',(1.70025,2.4495,0.905)); +#17139 = CARTESIAN_POINT('',(1.649171017995,2.347342035991,1.55)); +#17140 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17141 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17142 = ADVANCED_FACE('',(#17143),#17224,.F.); +#17143 = FACE_BOUND('',#17144,.F.); +#17144 = EDGE_LOOP('',(#17145,#17146,#17154,#17162,#17170,#17178,#17186, + #17194,#17202,#17210,#17217,#17223)); +#17145 = ORIENTED_EDGE('',*,*,#16265,.T.); +#17146 = ORIENTED_EDGE('',*,*,#17147,.T.); +#17147 = EDGE_CURVE('',#16258,#17148,#17150,.T.); +#17148 = VERTEX_POINT('',#17149); +#17149 = CARTESIAN_POINT('',(1.9495,1.7,0.905)); +#17150 = LINE('',#17151,#17152); +#17151 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17152 = VECTOR('',#17153,1.); +#17153 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17154 = ORIENTED_EDGE('',*,*,#17155,.T.); +#17155 = EDGE_CURVE('',#17148,#17156,#17158,.T.); +#17156 = VERTEX_POINT('',#17157); +#17157 = CARTESIAN_POINT('',(1.9495,0.84,0.905)); +#17158 = LINE('',#17159,#17160); +#17159 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17160 = VECTOR('',#17161,1.); +#17161 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17162 = ORIENTED_EDGE('',*,*,#17163,.T.); +#17163 = EDGE_CURVE('',#17156,#17164,#17166,.T.); +#17164 = VERTEX_POINT('',#17165); +#17165 = CARTESIAN_POINT('',(1.9495,0.43,0.905)); +#17166 = LINE('',#17167,#17168); +#17167 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17168 = VECTOR('',#17169,1.); +#17169 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17170 = ORIENTED_EDGE('',*,*,#17171,.T.); +#17171 = EDGE_CURVE('',#17164,#17172,#17174,.T.); +#17172 = VERTEX_POINT('',#17173); +#17173 = CARTESIAN_POINT('',(1.9495,-0.43,0.905)); +#17174 = LINE('',#17175,#17176); +#17175 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17176 = VECTOR('',#17177,1.); +#17177 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17178 = ORIENTED_EDGE('',*,*,#17179,.T.); +#17179 = EDGE_CURVE('',#17172,#17180,#17182,.T.); +#17180 = VERTEX_POINT('',#17181); +#17181 = CARTESIAN_POINT('',(1.9495,-0.84,0.905)); +#17182 = LINE('',#17183,#17184); +#17183 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17184 = VECTOR('',#17185,1.); +#17185 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17186 = ORIENTED_EDGE('',*,*,#17187,.T.); +#17187 = EDGE_CURVE('',#17180,#17188,#17190,.T.); +#17188 = VERTEX_POINT('',#17189); +#17189 = CARTESIAN_POINT('',(1.9495,-1.7,0.905)); +#17190 = LINE('',#17191,#17192); +#17191 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17192 = VECTOR('',#17193,1.); +#17193 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17194 = ORIENTED_EDGE('',*,*,#17195,.T.); +#17195 = EDGE_CURVE('',#17188,#17196,#17198,.T.); +#17196 = VERTEX_POINT('',#17197); +#17197 = CARTESIAN_POINT('',(1.9495,-2.11,0.905)); +#17198 = LINE('',#17199,#17200); +#17199 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17200 = VECTOR('',#17201,1.); +#17201 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17202 = ORIENTED_EDGE('',*,*,#17203,.T.); +#17203 = EDGE_CURVE('',#17196,#17204,#17206,.T.); +#17204 = VERTEX_POINT('',#17205); +#17205 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17206 = LINE('',#17207,#17208); +#17207 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17208 = VECTOR('',#17209,1.); +#17209 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17210 = ORIENTED_EDGE('',*,*,#17211,.T.); +#17211 = EDGE_CURVE('',#17204,#17212,#17214,.T.); +#17212 = VERTEX_POINT('',#17213); +#17213 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#17214 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17215,#17216),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#17215 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17216 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#17217 = ORIENTED_EDGE('',*,*,#17218,.F.); +#17218 = EDGE_CURVE('',#17125,#17212,#17219,.T.); +#17219 = LINE('',#17220,#17221); +#17220 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17221 = VECTOR('',#17222,1.); +#17222 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17223 = ORIENTED_EDGE('',*,*,#17124,.F.); +#17224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#17225,#17226) + ,(#17227,#17228 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#17225 = CARTESIAN_POINT('',(1.9495,2.20025,0.905)); +#17226 = CARTESIAN_POINT('',(1.847342035991,2.149171017995,1.55)); +#17227 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17228 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#17229 = ADVANCED_FACE('',(#17230),#17262,.F.); +#17230 = FACE_BOUND('',#17231,.F.); +#17231 = EDGE_LOOP('',(#17232,#17240,#17248,#17254,#17260,#17261)); +#17232 = ORIENTED_EDGE('',*,*,#17233,.F.); +#17233 = EDGE_CURVE('',#17234,#16250,#17236,.T.); +#17234 = VERTEX_POINT('',#17235); +#17235 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17236 = LINE('',#17237,#17238); +#17237 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17238 = VECTOR('',#17239,1.); +#17239 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17240 = ORIENTED_EDGE('',*,*,#17241,.T.); +#17241 = EDGE_CURVE('',#17234,#17242,#17244,.T.); +#17242 = VERTEX_POINT('',#17243); +#17243 = CARTESIAN_POINT('',(2.25,1.7,0.905)); +#17244 = LINE('',#17245,#17246); +#17245 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17246 = VECTOR('',#17247,1.); +#17247 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#17248 = ORIENTED_EDGE('',*,*,#17249,.T.); +#17249 = EDGE_CURVE('',#17242,#16656,#17250,.T.); +#17250 = LINE('',#17251,#17252); +#17251 = CARTESIAN_POINT('',(2.25,1.7,0.905)); +#17252 = VECTOR('',#17253,1.); +#17253 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17254 = ORIENTED_EDGE('',*,*,#17255,.T.); +#17255 = EDGE_CURVE('',#16656,#17148,#17256,.T.); +#17256 = LINE('',#17257,#17258); +#17257 = CARTESIAN_POINT('',(2.25,1.7,0.905)); +#17258 = VECTOR('',#17259,1.); +#17259 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17260 = ORIENTED_EDGE('',*,*,#17147,.F.); +#17261 = ORIENTED_EDGE('',*,*,#16257,.F.); +#17262 = PLANE('',#17263); +#17263 = AXIS2_PLACEMENT_3D('',#17264,#17265,#17266); +#17264 = CARTESIAN_POINT('',(2.25,2.11,0.905)); +#17265 = DIRECTION('',(0.,0.,-1.)); +#17266 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#17267 = ADVANCED_FACE('',(#17268),#17311,.F.); +#17268 = FACE_BOUND('',#17269,.F.); +#17269 = EDGE_LOOP('',(#17270,#17271,#17277,#17278,#17286,#17294,#17300, + #17301,#17307,#17308,#17309,#17310)); +#17270 = ORIENTED_EDGE('',*,*,#16359,.T.); +#17271 = ORIENTED_EDGE('',*,*,#17272,.T.); +#17272 = EDGE_CURVE('',#16352,#16994,#17273,.T.); +#17273 = LINE('',#17274,#17275); +#17274 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#17275 = VECTOR('',#17276,1.); +#17276 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17277 = ORIENTED_EDGE('',*,*,#16991,.F.); +#17278 = ORIENTED_EDGE('',*,*,#17279,.F.); +#17279 = EDGE_CURVE('',#17280,#16992,#17282,.T.); +#17280 = VERTEX_POINT('',#17281); +#17281 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#17282 = LINE('',#17283,#17284); +#17283 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#17284 = VECTOR('',#17285,1.); +#17285 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#17286 = ORIENTED_EDGE('',*,*,#17287,.F.); +#17287 = EDGE_CURVE('',#17288,#17280,#17290,.T.); +#17288 = VERTEX_POINT('',#17289); +#17289 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#17290 = LINE('',#17291,#17292); +#17291 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#17292 = VECTOR('',#17293,1.); +#17293 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17294 = ORIENTED_EDGE('',*,*,#17295,.F.); +#17295 = EDGE_CURVE('',#17204,#17288,#17296,.T.); +#17296 = LINE('',#17297,#17298); +#17297 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#17298 = VECTOR('',#17299,1.); +#17299 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#17300 = ORIENTED_EDGE('',*,*,#17203,.F.); +#17301 = ORIENTED_EDGE('',*,*,#17302,.F.); +#17302 = EDGE_CURVE('',#16842,#17196,#17303,.T.); +#17303 = LINE('',#17304,#17305); +#17304 = CARTESIAN_POINT('',(2.25,-2.11,0.905)); +#17305 = VECTOR('',#17306,1.); +#17306 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#17307 = ORIENTED_EDGE('',*,*,#16857,.T.); +#17308 = ORIENTED_EDGE('',*,*,#16902,.T.); +#17309 = ORIENTED_EDGE('',*,*,#16919,.T.); +#17310 = ORIENTED_EDGE('',*,*,#16873,.T.); +#17311 = PLANE('',#17312); +#17312 = AXIS2_PLACEMENT_3D('',#17313,#17314,#17315); +#17313 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17314 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17315 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17316 = ADVANCED_FACE('',(#17317),#17403,.F.); +#17317 = FACE_BOUND('',#17318,.F.); +#17318 = EDGE_LOOP('',(#17319,#17320,#17321,#17330,#17338,#17347,#17355, + #17363,#17371,#17380,#17388,#17397)); +#17319 = ORIENTED_EDGE('',*,*,#16351,.F.); +#17320 = ORIENTED_EDGE('',*,*,#16373,.T.); +#17321 = ORIENTED_EDGE('',*,*,#17322,.T.); +#17322 = EDGE_CURVE('',#16374,#17323,#17325,.T.); +#17323 = VERTEX_POINT('',#17324); +#17324 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#17325 = CIRCLE('',#17326,0.1); +#17326 = AXIS2_PLACEMENT_3D('',#17327,#17328,#17329); +#17327 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#17328 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17329 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17330 = ORIENTED_EDGE('',*,*,#17331,.T.); +#17331 = EDGE_CURVE('',#17323,#17332,#17334,.T.); +#17332 = VERTEX_POINT('',#17333); +#17333 = CARTESIAN_POINT('',(-2.404962786068,-2.11,0.256169064923)); +#17334 = LINE('',#17335,#17336); +#17335 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#17336 = VECTOR('',#17337,1.); +#17337 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17338 = ORIENTED_EDGE('',*,*,#17339,.T.); +#17339 = EDGE_CURVE('',#17332,#17340,#17342,.T.); +#17340 = VERTEX_POINT('',#17341); +#17341 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#17342 = CIRCLE('',#17343,0.31); +#17343 = AXIS2_PLACEMENT_3D('',#17344,#17345,#17346); +#17344 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#17345 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17346 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17347 = ORIENTED_EDGE('',*,*,#17348,.T.); +#17348 = EDGE_CURVE('',#17340,#17349,#17351,.T.); +#17349 = VERTEX_POINT('',#17350); +#17350 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#17351 = LINE('',#17352,#17353); +#17352 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#17353 = VECTOR('',#17354,1.); +#17354 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17355 = ORIENTED_EDGE('',*,*,#17356,.T.); +#17356 = EDGE_CURVE('',#17349,#17357,#17359,.T.); +#17357 = VERTEX_POINT('',#17358); +#17358 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#17359 = LINE('',#17360,#17361); +#17360 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#17361 = VECTOR('',#17362,1.); +#17362 = DIRECTION('',(0.,0.,1.)); +#17363 = ORIENTED_EDGE('',*,*,#17364,.T.); +#17364 = EDGE_CURVE('',#17357,#17365,#17367,.T.); +#17365 = VERTEX_POINT('',#17366); +#17366 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.21)); +#17367 = LINE('',#17368,#17369); +#17368 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#17369 = VECTOR('',#17370,1.); +#17370 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17371 = ORIENTED_EDGE('',*,*,#17372,.T.); +#17372 = EDGE_CURVE('',#17365,#17373,#17375,.T.); +#17373 = VERTEX_POINT('',#17374); +#17374 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#17375 = CIRCLE('',#17376,0.1); +#17376 = AXIS2_PLACEMENT_3D('',#17377,#17378,#17379); +#17377 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#17378 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17379 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17380 = ORIENTED_EDGE('',*,*,#17381,.T.); +#17381 = EDGE_CURVE('',#17373,#17382,#17384,.T.); +#17382 = VERTEX_POINT('',#17383); +#17383 = CARTESIAN_POINT('',(-2.555290403434,-2.11,0.648830935077)); +#17384 = LINE('',#17385,#17386); +#17385 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#17386 = VECTOR('',#17387,1.); +#17387 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17388 = ORIENTED_EDGE('',*,*,#17389,.T.); +#17389 = EDGE_CURVE('',#17382,#17390,#17392,.T.); +#17390 = VERTEX_POINT('',#17391); +#17391 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#17392 = CIRCLE('',#17393,0.31); +#17393 = AXIS2_PLACEMENT_3D('',#17394,#17395,#17396); +#17394 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#17395 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17396 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17397 = ORIENTED_EDGE('',*,*,#17398,.T.); +#17398 = EDGE_CURVE('',#17390,#16352,#17399,.T.); +#17399 = LINE('',#17400,#17401); +#17400 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#17401 = VECTOR('',#17402,1.); +#17402 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17403 = PLANE('',#17404); +#17404 = AXIS2_PLACEMENT_3D('',#17405,#17406,#17407); +#17405 = CARTESIAN_POINT('',(-2.476022294864,-2.11,0.454762084394)); +#17406 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17407 = DIRECTION('',(0.,-0.,1.)); +#17408 = ADVANCED_FACE('',(#17409),#17428,.F.); +#17409 = FACE_BOUND('',#17410,.F.); +#17410 = EDGE_LOOP('',(#17411,#17412,#17421,#17427)); +#17411 = ORIENTED_EDGE('',*,*,#16390,.T.); +#17412 = ORIENTED_EDGE('',*,*,#17413,.T.); +#17413 = EDGE_CURVE('',#16383,#17414,#17416,.T.); +#17414 = VERTEX_POINT('',#17415); +#17415 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.612364817767)); +#17416 = CIRCLE('',#17417,0.1); +#17417 = AXIS2_PLACEMENT_3D('',#17418,#17419,#17420); +#17418 = CARTESIAN_POINT('',(-2.25,-1.7,0.595)); +#17419 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17420 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17421 = ORIENTED_EDGE('',*,*,#17422,.F.); +#17422 = EDGE_CURVE('',#17323,#17414,#17423,.T.); +#17423 = LINE('',#17424,#17425); +#17424 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#17425 = VECTOR('',#17426,1.); +#17426 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17427 = ORIENTED_EDGE('',*,*,#17322,.F.); +#17428 = CYLINDRICAL_SURFACE('',#17429,0.1); +#17429 = AXIS2_PLACEMENT_3D('',#17430,#17431,#17432); +#17430 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#17431 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#17432 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17433 = ADVANCED_FACE('',(#17434),#17512,.T.); +#17434 = FACE_BOUND('',#17435,.T.); +#17435 = EDGE_LOOP('',(#17436,#17437,#17438,#17439,#17447,#17456,#17464, + #17472,#17480,#17489,#17497,#17506)); +#17436 = ORIENTED_EDGE('',*,*,#16404,.F.); +#17437 = ORIENTED_EDGE('',*,*,#16382,.T.); +#17438 = ORIENTED_EDGE('',*,*,#17413,.T.); +#17439 = ORIENTED_EDGE('',*,*,#17440,.T.); +#17440 = EDGE_CURVE('',#17414,#17441,#17443,.T.); +#17441 = VERTEX_POINT('',#17442); +#17442 = CARTESIAN_POINT('',(-2.404962786068,-1.7,0.256169064923)); +#17443 = LINE('',#17444,#17445); +#17444 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.612364817767)); +#17445 = VECTOR('',#17446,1.); +#17446 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17447 = ORIENTED_EDGE('',*,*,#17448,.T.); +#17448 = EDGE_CURVE('',#17441,#17449,#17451,.T.); +#17449 = VERTEX_POINT('',#17450); +#17450 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.)); +#17451 = CIRCLE('',#17452,0.31); +#17452 = AXIS2_PLACEMENT_3D('',#17453,#17454,#17455); +#17453 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.31)); +#17454 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17455 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17456 = ORIENTED_EDGE('',*,*,#17457,.T.); +#17457 = EDGE_CURVE('',#17449,#17458,#17460,.T.); +#17458 = VERTEX_POINT('',#17459); +#17459 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#17460 = LINE('',#17461,#17462); +#17461 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.)); +#17462 = VECTOR('',#17463,1.); +#17463 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17464 = ORIENTED_EDGE('',*,*,#17465,.T.); +#17465 = EDGE_CURVE('',#17458,#17466,#17468,.T.); +#17466 = VERTEX_POINT('',#17467); +#17467 = CARTESIAN_POINT('',(-3.,-1.7,0.21)); +#17468 = LINE('',#17469,#17470); +#17469 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#17470 = VECTOR('',#17471,1.); +#17471 = DIRECTION('',(0.,0.,1.)); +#17472 = ORIENTED_EDGE('',*,*,#17473,.T.); +#17473 = EDGE_CURVE('',#17466,#17474,#17476,.T.); +#17474 = VERTEX_POINT('',#17475); +#17475 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.21)); +#17476 = LINE('',#17477,#17478); +#17477 = CARTESIAN_POINT('',(-3.,-1.7,0.21)); +#17478 = VECTOR('',#17479,1.); +#17479 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17480 = ORIENTED_EDGE('',*,*,#17481,.T.); +#17481 = EDGE_CURVE('',#17474,#17482,#17484,.T.); +#17482 = VERTEX_POINT('',#17483); +#17483 = CARTESIAN_POINT('',(-2.611772414201,-1.7,0.292635182233)); +#17484 = CIRCLE('',#17485,0.1); +#17485 = AXIS2_PLACEMENT_3D('',#17486,#17487,#17488); +#17486 = CARTESIAN_POINT('',(-2.710253189502,-1.7,0.31)); +#17487 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17488 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17489 = ORIENTED_EDGE('',*,*,#17490,.T.); +#17490 = EDGE_CURVE('',#17482,#17491,#17493,.T.); +#17491 = VERTEX_POINT('',#17492); +#17492 = CARTESIAN_POINT('',(-2.555290403434,-1.7,0.648830935077)); +#17493 = LINE('',#17494,#17495); +#17494 = CARTESIAN_POINT('',(-2.611772414201,-1.7,0.292635182233)); +#17495 = VECTOR('',#17496,1.); +#17496 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17497 = ORIENTED_EDGE('',*,*,#17498,.T.); +#17498 = EDGE_CURVE('',#17491,#17499,#17501,.T.); +#17499 = VERTEX_POINT('',#17500); +#17500 = CARTESIAN_POINT('',(-2.25,-1.7,0.905)); +#17501 = CIRCLE('',#17502,0.31); +#17502 = AXIS2_PLACEMENT_3D('',#17503,#17504,#17505); +#17503 = CARTESIAN_POINT('',(-2.25,-1.7,0.595)); +#17504 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17505 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17506 = ORIENTED_EDGE('',*,*,#17507,.T.); +#17507 = EDGE_CURVE('',#17499,#16405,#17508,.T.); +#17508 = LINE('',#17509,#17510); +#17509 = CARTESIAN_POINT('',(-2.25,-1.7,0.905)); +#17510 = VECTOR('',#17511,1.); +#17511 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17512 = PLANE('',#17513); +#17513 = AXIS2_PLACEMENT_3D('',#17514,#17515,#17516); +#17514 = CARTESIAN_POINT('',(-2.476022294864,-1.7,0.454762084394)); +#17515 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17516 = DIRECTION('',(0.,-0.,1.)); +#17517 = ADVANCED_FACE('',(#17518),#17534,.F.); +#17518 = FACE_BOUND('',#17519,.F.); +#17519 = EDGE_LOOP('',(#17520,#17521,#17527,#17528)); +#17520 = ORIENTED_EDGE('',*,*,#16421,.T.); +#17521 = ORIENTED_EDGE('',*,*,#17522,.T.); +#17522 = EDGE_CURVE('',#16414,#17010,#17523,.T.); +#17523 = LINE('',#17524,#17525); +#17524 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#17525 = VECTOR('',#17526,1.); +#17526 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17527 = ORIENTED_EDGE('',*,*,#17009,.F.); +#17528 = ORIENTED_EDGE('',*,*,#17529,.F.); +#17529 = EDGE_CURVE('',#16405,#17002,#17530,.T.); +#17530 = LINE('',#17531,#17532); +#17531 = CARTESIAN_POINT('',(-2.25,-1.7,0.905)); +#17532 = VECTOR('',#17533,1.); +#17533 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17534 = PLANE('',#17535); +#17535 = AXIS2_PLACEMENT_3D('',#17536,#17537,#17538); +#17536 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17537 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17538 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17539 = ADVANCED_FACE('',(#17540),#17626,.F.); +#17540 = FACE_BOUND('',#17541,.F.); +#17541 = EDGE_LOOP('',(#17542,#17543,#17544,#17553,#17561,#17570,#17578, + #17586,#17594,#17603,#17611,#17620)); +#17542 = ORIENTED_EDGE('',*,*,#16413,.F.); +#17543 = ORIENTED_EDGE('',*,*,#16435,.T.); +#17544 = ORIENTED_EDGE('',*,*,#17545,.T.); +#17545 = EDGE_CURVE('',#16436,#17546,#17548,.T.); +#17546 = VERTEX_POINT('',#17547); +#17547 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#17548 = CIRCLE('',#17549,0.1); +#17549 = AXIS2_PLACEMENT_3D('',#17550,#17551,#17552); +#17550 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#17551 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17552 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17553 = ORIENTED_EDGE('',*,*,#17554,.T.); +#17554 = EDGE_CURVE('',#17546,#17555,#17557,.T.); +#17555 = VERTEX_POINT('',#17556); +#17556 = CARTESIAN_POINT('',(-2.404962786068,-0.84,0.256169064923)); +#17557 = LINE('',#17558,#17559); +#17558 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#17559 = VECTOR('',#17560,1.); +#17560 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17561 = ORIENTED_EDGE('',*,*,#17562,.T.); +#17562 = EDGE_CURVE('',#17555,#17563,#17565,.T.); +#17563 = VERTEX_POINT('',#17564); +#17564 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#17565 = CIRCLE('',#17566,0.31); +#17566 = AXIS2_PLACEMENT_3D('',#17567,#17568,#17569); +#17567 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#17568 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17569 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17570 = ORIENTED_EDGE('',*,*,#17571,.T.); +#17571 = EDGE_CURVE('',#17563,#17572,#17574,.T.); +#17572 = VERTEX_POINT('',#17573); +#17573 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#17574 = LINE('',#17575,#17576); +#17575 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#17576 = VECTOR('',#17577,1.); +#17577 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17578 = ORIENTED_EDGE('',*,*,#17579,.T.); +#17579 = EDGE_CURVE('',#17572,#17580,#17582,.T.); +#17580 = VERTEX_POINT('',#17581); +#17581 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#17582 = LINE('',#17583,#17584); +#17583 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#17584 = VECTOR('',#17585,1.); +#17585 = DIRECTION('',(0.,0.,1.)); +#17586 = ORIENTED_EDGE('',*,*,#17587,.T.); +#17587 = EDGE_CURVE('',#17580,#17588,#17590,.T.); +#17588 = VERTEX_POINT('',#17589); +#17589 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.21)); +#17590 = LINE('',#17591,#17592); +#17591 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#17592 = VECTOR('',#17593,1.); +#17593 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17594 = ORIENTED_EDGE('',*,*,#17595,.T.); +#17595 = EDGE_CURVE('',#17588,#17596,#17598,.T.); +#17596 = VERTEX_POINT('',#17597); +#17597 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#17598 = CIRCLE('',#17599,0.1); +#17599 = AXIS2_PLACEMENT_3D('',#17600,#17601,#17602); +#17600 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#17601 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17602 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17603 = ORIENTED_EDGE('',*,*,#17604,.T.); +#17604 = EDGE_CURVE('',#17596,#17605,#17607,.T.); +#17605 = VERTEX_POINT('',#17606); +#17606 = CARTESIAN_POINT('',(-2.555290403434,-0.84,0.648830935077)); +#17607 = LINE('',#17608,#17609); +#17608 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#17609 = VECTOR('',#17610,1.); +#17610 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17611 = ORIENTED_EDGE('',*,*,#17612,.T.); +#17612 = EDGE_CURVE('',#17605,#17613,#17615,.T.); +#17613 = VERTEX_POINT('',#17614); +#17614 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#17615 = CIRCLE('',#17616,0.31); +#17616 = AXIS2_PLACEMENT_3D('',#17617,#17618,#17619); +#17617 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#17618 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17619 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17620 = ORIENTED_EDGE('',*,*,#17621,.T.); +#17621 = EDGE_CURVE('',#17613,#16414,#17622,.T.); +#17622 = LINE('',#17623,#17624); +#17623 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#17624 = VECTOR('',#17625,1.); +#17625 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17626 = PLANE('',#17627); +#17627 = AXIS2_PLACEMENT_3D('',#17628,#17629,#17630); +#17628 = CARTESIAN_POINT('',(-2.476022294864,-0.84,0.454762084394)); +#17629 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17630 = DIRECTION('',(0.,-0.,1.)); +#17631 = ADVANCED_FACE('',(#17632),#17651,.F.); +#17632 = FACE_BOUND('',#17633,.F.); +#17633 = EDGE_LOOP('',(#17634,#17635,#17644,#17650)); +#17634 = ORIENTED_EDGE('',*,*,#16452,.T.); +#17635 = ORIENTED_EDGE('',*,*,#17636,.T.); +#17636 = EDGE_CURVE('',#16445,#17637,#17639,.T.); +#17637 = VERTEX_POINT('',#17638); +#17638 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.612364817767)); +#17639 = CIRCLE('',#17640,0.1); +#17640 = AXIS2_PLACEMENT_3D('',#17641,#17642,#17643); +#17641 = CARTESIAN_POINT('',(-2.25,-0.43,0.595)); +#17642 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17643 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17644 = ORIENTED_EDGE('',*,*,#17645,.F.); +#17645 = EDGE_CURVE('',#17546,#17637,#17646,.T.); +#17646 = LINE('',#17647,#17648); +#17647 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#17648 = VECTOR('',#17649,1.); +#17649 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17650 = ORIENTED_EDGE('',*,*,#17545,.F.); +#17651 = CYLINDRICAL_SURFACE('',#17652,0.1); +#17652 = AXIS2_PLACEMENT_3D('',#17653,#17654,#17655); +#17653 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#17654 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#17655 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17656 = ADVANCED_FACE('',(#17657),#17735,.T.); +#17657 = FACE_BOUND('',#17658,.T.); +#17658 = EDGE_LOOP('',(#17659,#17660,#17661,#17662,#17670,#17679,#17687, + #17695,#17703,#17712,#17720,#17729)); +#17659 = ORIENTED_EDGE('',*,*,#16466,.F.); +#17660 = ORIENTED_EDGE('',*,*,#16444,.T.); +#17661 = ORIENTED_EDGE('',*,*,#17636,.T.); +#17662 = ORIENTED_EDGE('',*,*,#17663,.T.); +#17663 = EDGE_CURVE('',#17637,#17664,#17666,.T.); +#17664 = VERTEX_POINT('',#17665); +#17665 = CARTESIAN_POINT('',(-2.404962786068,-0.43,0.256169064923)); +#17666 = LINE('',#17667,#17668); +#17667 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.612364817767)); +#17668 = VECTOR('',#17669,1.); +#17669 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17670 = ORIENTED_EDGE('',*,*,#17671,.T.); +#17671 = EDGE_CURVE('',#17664,#17672,#17674,.T.); +#17672 = VERTEX_POINT('',#17673); +#17673 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.)); +#17674 = CIRCLE('',#17675,0.31); +#17675 = AXIS2_PLACEMENT_3D('',#17676,#17677,#17678); +#17676 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.31)); +#17677 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17678 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17679 = ORIENTED_EDGE('',*,*,#17680,.T.); +#17680 = EDGE_CURVE('',#17672,#17681,#17683,.T.); +#17681 = VERTEX_POINT('',#17682); +#17682 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#17683 = LINE('',#17684,#17685); +#17684 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.)); +#17685 = VECTOR('',#17686,1.); +#17686 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17687 = ORIENTED_EDGE('',*,*,#17688,.T.); +#17688 = EDGE_CURVE('',#17681,#17689,#17691,.T.); +#17689 = VERTEX_POINT('',#17690); +#17690 = CARTESIAN_POINT('',(-3.,-0.43,0.21)); +#17691 = LINE('',#17692,#17693); +#17692 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#17693 = VECTOR('',#17694,1.); +#17694 = DIRECTION('',(0.,0.,1.)); +#17695 = ORIENTED_EDGE('',*,*,#17696,.T.); +#17696 = EDGE_CURVE('',#17689,#17697,#17699,.T.); +#17697 = VERTEX_POINT('',#17698); +#17698 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.21)); +#17699 = LINE('',#17700,#17701); +#17700 = CARTESIAN_POINT('',(-3.,-0.43,0.21)); +#17701 = VECTOR('',#17702,1.); +#17702 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17703 = ORIENTED_EDGE('',*,*,#17704,.T.); +#17704 = EDGE_CURVE('',#17697,#17705,#17707,.T.); +#17705 = VERTEX_POINT('',#17706); +#17706 = CARTESIAN_POINT('',(-2.611772414201,-0.43,0.292635182233)); +#17707 = CIRCLE('',#17708,0.1); +#17708 = AXIS2_PLACEMENT_3D('',#17709,#17710,#17711); +#17709 = CARTESIAN_POINT('',(-2.710253189502,-0.43,0.31)); +#17710 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17711 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17712 = ORIENTED_EDGE('',*,*,#17713,.T.); +#17713 = EDGE_CURVE('',#17705,#17714,#17716,.T.); +#17714 = VERTEX_POINT('',#17715); +#17715 = CARTESIAN_POINT('',(-2.555290403434,-0.43,0.648830935077)); +#17716 = LINE('',#17717,#17718); +#17717 = CARTESIAN_POINT('',(-2.611772414201,-0.43,0.292635182233)); +#17718 = VECTOR('',#17719,1.); +#17719 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17720 = ORIENTED_EDGE('',*,*,#17721,.T.); +#17721 = EDGE_CURVE('',#17714,#17722,#17724,.T.); +#17722 = VERTEX_POINT('',#17723); +#17723 = CARTESIAN_POINT('',(-2.25,-0.43,0.905)); +#17724 = CIRCLE('',#17725,0.31); +#17725 = AXIS2_PLACEMENT_3D('',#17726,#17727,#17728); +#17726 = CARTESIAN_POINT('',(-2.25,-0.43,0.595)); +#17727 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17728 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17729 = ORIENTED_EDGE('',*,*,#17730,.T.); +#17730 = EDGE_CURVE('',#17722,#16467,#17731,.T.); +#17731 = LINE('',#17732,#17733); +#17732 = CARTESIAN_POINT('',(-2.25,-0.43,0.905)); +#17733 = VECTOR('',#17734,1.); +#17734 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17735 = PLANE('',#17736); +#17736 = AXIS2_PLACEMENT_3D('',#17737,#17738,#17739); +#17737 = CARTESIAN_POINT('',(-2.476022294864,-0.43,0.454762084394)); +#17738 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17739 = DIRECTION('',(0.,-0.,1.)); +#17740 = ADVANCED_FACE('',(#17741),#17757,.F.); +#17741 = FACE_BOUND('',#17742,.F.); +#17742 = EDGE_LOOP('',(#17743,#17744,#17750,#17751)); +#17743 = ORIENTED_EDGE('',*,*,#16483,.T.); +#17744 = ORIENTED_EDGE('',*,*,#17745,.T.); +#17745 = EDGE_CURVE('',#16476,#17026,#17746,.T.); +#17746 = LINE('',#17747,#17748); +#17747 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#17748 = VECTOR('',#17749,1.); +#17749 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17750 = ORIENTED_EDGE('',*,*,#17025,.F.); +#17751 = ORIENTED_EDGE('',*,*,#17752,.F.); +#17752 = EDGE_CURVE('',#16467,#17018,#17753,.T.); +#17753 = LINE('',#17754,#17755); +#17754 = CARTESIAN_POINT('',(-2.25,-0.43,0.905)); +#17755 = VECTOR('',#17756,1.); +#17756 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17757 = PLANE('',#17758); +#17758 = AXIS2_PLACEMENT_3D('',#17759,#17760,#17761); +#17759 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17760 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17761 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17762 = ADVANCED_FACE('',(#17763),#17849,.F.); +#17763 = FACE_BOUND('',#17764,.F.); +#17764 = EDGE_LOOP('',(#17765,#17766,#17767,#17776,#17784,#17793,#17801, + #17809,#17817,#17826,#17834,#17843)); +#17765 = ORIENTED_EDGE('',*,*,#16475,.F.); +#17766 = ORIENTED_EDGE('',*,*,#16497,.T.); +#17767 = ORIENTED_EDGE('',*,*,#17768,.T.); +#17768 = EDGE_CURVE('',#16498,#17769,#17771,.T.); +#17769 = VERTEX_POINT('',#17770); +#17770 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#17771 = CIRCLE('',#17772,0.1); +#17772 = AXIS2_PLACEMENT_3D('',#17773,#17774,#17775); +#17773 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#17774 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17775 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17776 = ORIENTED_EDGE('',*,*,#17777,.T.); +#17777 = EDGE_CURVE('',#17769,#17778,#17780,.T.); +#17778 = VERTEX_POINT('',#17779); +#17779 = CARTESIAN_POINT('',(-2.404962786068,0.43,0.256169064923)); +#17780 = LINE('',#17781,#17782); +#17781 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#17782 = VECTOR('',#17783,1.); +#17783 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17784 = ORIENTED_EDGE('',*,*,#17785,.T.); +#17785 = EDGE_CURVE('',#17778,#17786,#17788,.T.); +#17786 = VERTEX_POINT('',#17787); +#17787 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#17788 = CIRCLE('',#17789,0.31); +#17789 = AXIS2_PLACEMENT_3D('',#17790,#17791,#17792); +#17790 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#17791 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17792 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17793 = ORIENTED_EDGE('',*,*,#17794,.T.); +#17794 = EDGE_CURVE('',#17786,#17795,#17797,.T.); +#17795 = VERTEX_POINT('',#17796); +#17796 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#17797 = LINE('',#17798,#17799); +#17798 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#17799 = VECTOR('',#17800,1.); +#17800 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17801 = ORIENTED_EDGE('',*,*,#17802,.T.); +#17802 = EDGE_CURVE('',#17795,#17803,#17805,.T.); +#17803 = VERTEX_POINT('',#17804); +#17804 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#17805 = LINE('',#17806,#17807); +#17806 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#17807 = VECTOR('',#17808,1.); +#17808 = DIRECTION('',(0.,0.,1.)); +#17809 = ORIENTED_EDGE('',*,*,#17810,.T.); +#17810 = EDGE_CURVE('',#17803,#17811,#17813,.T.); +#17811 = VERTEX_POINT('',#17812); +#17812 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.21)); +#17813 = LINE('',#17814,#17815); +#17814 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#17815 = VECTOR('',#17816,1.); +#17816 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17817 = ORIENTED_EDGE('',*,*,#17818,.T.); +#17818 = EDGE_CURVE('',#17811,#17819,#17821,.T.); +#17819 = VERTEX_POINT('',#17820); +#17820 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#17821 = CIRCLE('',#17822,0.1); +#17822 = AXIS2_PLACEMENT_3D('',#17823,#17824,#17825); +#17823 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#17824 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17825 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17826 = ORIENTED_EDGE('',*,*,#17827,.T.); +#17827 = EDGE_CURVE('',#17819,#17828,#17830,.T.); +#17828 = VERTEX_POINT('',#17829); +#17829 = CARTESIAN_POINT('',(-2.555290403434,0.43,0.648830935077)); +#17830 = LINE('',#17831,#17832); +#17831 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#17832 = VECTOR('',#17833,1.); +#17833 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17834 = ORIENTED_EDGE('',*,*,#17835,.T.); +#17835 = EDGE_CURVE('',#17828,#17836,#17838,.T.); +#17836 = VERTEX_POINT('',#17837); +#17837 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#17838 = CIRCLE('',#17839,0.31); +#17839 = AXIS2_PLACEMENT_3D('',#17840,#17841,#17842); +#17840 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#17841 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17842 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17843 = ORIENTED_EDGE('',*,*,#17844,.T.); +#17844 = EDGE_CURVE('',#17836,#16476,#17845,.T.); +#17845 = LINE('',#17846,#17847); +#17846 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#17847 = VECTOR('',#17848,1.); +#17848 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17849 = PLANE('',#17850); +#17850 = AXIS2_PLACEMENT_3D('',#17851,#17852,#17853); +#17851 = CARTESIAN_POINT('',(-2.476022294864,0.43,0.454762084394)); +#17852 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17853 = DIRECTION('',(0.,-0.,1.)); +#17854 = ADVANCED_FACE('',(#17855),#17874,.F.); +#17855 = FACE_BOUND('',#17856,.F.); +#17856 = EDGE_LOOP('',(#17857,#17858,#17867,#17873)); +#17857 = ORIENTED_EDGE('',*,*,#16514,.T.); +#17858 = ORIENTED_EDGE('',*,*,#17859,.T.); +#17859 = EDGE_CURVE('',#16507,#17860,#17862,.T.); +#17860 = VERTEX_POINT('',#17861); +#17861 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.612364817767)); +#17862 = CIRCLE('',#17863,0.1); +#17863 = AXIS2_PLACEMENT_3D('',#17864,#17865,#17866); +#17864 = CARTESIAN_POINT('',(-2.25,0.84,0.595)); +#17865 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17866 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17867 = ORIENTED_EDGE('',*,*,#17868,.F.); +#17868 = EDGE_CURVE('',#17769,#17860,#17869,.T.); +#17869 = LINE('',#17870,#17871); +#17870 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#17871 = VECTOR('',#17872,1.); +#17872 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17873 = ORIENTED_EDGE('',*,*,#17768,.F.); +#17874 = CYLINDRICAL_SURFACE('',#17875,0.1); +#17875 = AXIS2_PLACEMENT_3D('',#17876,#17877,#17878); +#17876 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#17877 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#17878 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17879 = ADVANCED_FACE('',(#17880),#17958,.T.); +#17880 = FACE_BOUND('',#17881,.T.); +#17881 = EDGE_LOOP('',(#17882,#17883,#17884,#17885,#17893,#17902,#17910, + #17918,#17926,#17935,#17943,#17952)); +#17882 = ORIENTED_EDGE('',*,*,#16528,.F.); +#17883 = ORIENTED_EDGE('',*,*,#16506,.T.); +#17884 = ORIENTED_EDGE('',*,*,#17859,.T.); +#17885 = ORIENTED_EDGE('',*,*,#17886,.T.); +#17886 = EDGE_CURVE('',#17860,#17887,#17889,.T.); +#17887 = VERTEX_POINT('',#17888); +#17888 = CARTESIAN_POINT('',(-2.404962786068,0.84,0.256169064923)); +#17889 = LINE('',#17890,#17891); +#17890 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.612364817767)); +#17891 = VECTOR('',#17892,1.); +#17892 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#17893 = ORIENTED_EDGE('',*,*,#17894,.T.); +#17894 = EDGE_CURVE('',#17887,#17895,#17897,.T.); +#17895 = VERTEX_POINT('',#17896); +#17896 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.)); +#17897 = CIRCLE('',#17898,0.31); +#17898 = AXIS2_PLACEMENT_3D('',#17899,#17900,#17901); +#17899 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.31)); +#17900 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#17901 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#17902 = ORIENTED_EDGE('',*,*,#17903,.T.); +#17903 = EDGE_CURVE('',#17895,#17904,#17906,.T.); +#17904 = VERTEX_POINT('',#17905); +#17905 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#17906 = LINE('',#17907,#17908); +#17907 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.)); +#17908 = VECTOR('',#17909,1.); +#17909 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#17910 = ORIENTED_EDGE('',*,*,#17911,.T.); +#17911 = EDGE_CURVE('',#17904,#17912,#17914,.T.); +#17912 = VERTEX_POINT('',#17913); +#17913 = CARTESIAN_POINT('',(-3.,0.84,0.21)); +#17914 = LINE('',#17915,#17916); +#17915 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#17916 = VECTOR('',#17917,1.); +#17917 = DIRECTION('',(0.,0.,1.)); +#17918 = ORIENTED_EDGE('',*,*,#17919,.T.); +#17919 = EDGE_CURVE('',#17912,#17920,#17922,.T.); +#17920 = VERTEX_POINT('',#17921); +#17921 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.21)); +#17922 = LINE('',#17923,#17924); +#17923 = CARTESIAN_POINT('',(-3.,0.84,0.21)); +#17924 = VECTOR('',#17925,1.); +#17925 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17926 = ORIENTED_EDGE('',*,*,#17927,.T.); +#17927 = EDGE_CURVE('',#17920,#17928,#17930,.T.); +#17928 = VERTEX_POINT('',#17929); +#17929 = CARTESIAN_POINT('',(-2.611772414201,0.84,0.292635182233)); +#17930 = CIRCLE('',#17931,0.1); +#17931 = AXIS2_PLACEMENT_3D('',#17932,#17933,#17934); +#17932 = CARTESIAN_POINT('',(-2.710253189502,0.84,0.31)); +#17933 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#17934 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#17935 = ORIENTED_EDGE('',*,*,#17936,.T.); +#17936 = EDGE_CURVE('',#17928,#17937,#17939,.T.); +#17937 = VERTEX_POINT('',#17938); +#17938 = CARTESIAN_POINT('',(-2.555290403434,0.84,0.648830935077)); +#17939 = LINE('',#17940,#17941); +#17940 = CARTESIAN_POINT('',(-2.611772414201,0.84,0.292635182233)); +#17941 = VECTOR('',#17942,1.); +#17942 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#17943 = ORIENTED_EDGE('',*,*,#17944,.T.); +#17944 = EDGE_CURVE('',#17937,#17945,#17947,.T.); +#17945 = VERTEX_POINT('',#17946); +#17946 = CARTESIAN_POINT('',(-2.25,0.84,0.905)); +#17947 = CIRCLE('',#17948,0.31); +#17948 = AXIS2_PLACEMENT_3D('',#17949,#17950,#17951); +#17949 = CARTESIAN_POINT('',(-2.25,0.84,0.595)); +#17950 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#17951 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#17952 = ORIENTED_EDGE('',*,*,#17953,.T.); +#17953 = EDGE_CURVE('',#17945,#16529,#17954,.T.); +#17954 = LINE('',#17955,#17956); +#17955 = CARTESIAN_POINT('',(-2.25,0.84,0.905)); +#17956 = VECTOR('',#17957,1.); +#17957 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17958 = PLANE('',#17959); +#17959 = AXIS2_PLACEMENT_3D('',#17960,#17961,#17962); +#17960 = CARTESIAN_POINT('',(-2.476022294864,0.84,0.454762084394)); +#17961 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#17962 = DIRECTION('',(0.,-0.,1.)); +#17963 = ADVANCED_FACE('',(#17964),#17975,.F.); +#17964 = FACE_BOUND('',#17965,.F.); +#17965 = EDGE_LOOP('',(#17966,#17967,#17968,#17969)); +#17966 = ORIENTED_EDGE('',*,*,#16545,.T.); +#17967 = ORIENTED_EDGE('',*,*,#16977,.T.); +#17968 = ORIENTED_EDGE('',*,*,#17041,.F.); +#17969 = ORIENTED_EDGE('',*,*,#17970,.F.); +#17970 = EDGE_CURVE('',#16529,#17034,#17971,.T.); +#17971 = LINE('',#17972,#17973); +#17972 = CARTESIAN_POINT('',(-2.25,0.84,0.905)); +#17973 = VECTOR('',#17974,1.); +#17974 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#17975 = PLANE('',#17976); +#17976 = AXIS2_PLACEMENT_3D('',#17977,#17978,#17979); +#17977 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#17978 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#17979 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#17980 = ADVANCED_FACE('',(#17981),#18060,.F.); +#17981 = FACE_BOUND('',#17982,.F.); +#17982 = EDGE_LOOP('',(#17983,#17984,#17985,#17994,#18002,#18011,#18019, + #18027,#18035,#18044,#18052,#18059)); +#17983 = ORIENTED_EDGE('',*,*,#16537,.F.); +#17984 = ORIENTED_EDGE('',*,*,#16559,.T.); +#17985 = ORIENTED_EDGE('',*,*,#17986,.T.); +#17986 = EDGE_CURVE('',#16560,#17987,#17989,.T.); +#17987 = VERTEX_POINT('',#17988); +#17988 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#17989 = CIRCLE('',#17990,0.1); +#17990 = AXIS2_PLACEMENT_3D('',#17991,#17992,#17993); +#17991 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#17992 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#17993 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#17994 = ORIENTED_EDGE('',*,*,#17995,.T.); +#17995 = EDGE_CURVE('',#17987,#17996,#17998,.T.); +#17996 = VERTEX_POINT('',#17997); +#17997 = CARTESIAN_POINT('',(-2.404962786068,1.7,0.256169064923)); +#17998 = LINE('',#17999,#18000); +#17999 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#18000 = VECTOR('',#18001,1.); +#18001 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#18002 = ORIENTED_EDGE('',*,*,#18003,.T.); +#18003 = EDGE_CURVE('',#17996,#18004,#18006,.T.); +#18004 = VERTEX_POINT('',#18005); +#18005 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#18006 = CIRCLE('',#18007,0.31); +#18007 = AXIS2_PLACEMENT_3D('',#18008,#18009,#18010); +#18008 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#18009 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#18010 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#18011 = ORIENTED_EDGE('',*,*,#18012,.T.); +#18012 = EDGE_CURVE('',#18004,#18013,#18015,.T.); +#18013 = VERTEX_POINT('',#18014); +#18014 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#18015 = LINE('',#18016,#18017); +#18016 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#18017 = VECTOR('',#18018,1.); +#18018 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#18019 = ORIENTED_EDGE('',*,*,#18020,.T.); +#18020 = EDGE_CURVE('',#18013,#18021,#18023,.T.); +#18021 = VERTEX_POINT('',#18022); +#18022 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#18023 = LINE('',#18024,#18025); +#18024 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#18025 = VECTOR('',#18026,1.); +#18026 = DIRECTION('',(0.,0.,1.)); +#18027 = ORIENTED_EDGE('',*,*,#18028,.T.); +#18028 = EDGE_CURVE('',#18021,#18029,#18031,.T.); +#18029 = VERTEX_POINT('',#18030); +#18030 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.21)); +#18031 = LINE('',#18032,#18033); +#18032 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#18033 = VECTOR('',#18034,1.); +#18034 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#18035 = ORIENTED_EDGE('',*,*,#18036,.T.); +#18036 = EDGE_CURVE('',#18029,#18037,#18039,.T.); +#18037 = VERTEX_POINT('',#18038); +#18038 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#18039 = CIRCLE('',#18040,0.1); +#18040 = AXIS2_PLACEMENT_3D('',#18041,#18042,#18043); +#18041 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#18042 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#18043 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#18044 = ORIENTED_EDGE('',*,*,#18045,.T.); +#18045 = EDGE_CURVE('',#18037,#18046,#18048,.T.); +#18046 = VERTEX_POINT('',#18047); +#18047 = CARTESIAN_POINT('',(-2.555290403434,1.7,0.648830935077)); +#18048 = LINE('',#18049,#18050); +#18049 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#18050 = VECTOR('',#18051,1.); +#18051 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#18052 = ORIENTED_EDGE('',*,*,#18053,.T.); +#18053 = EDGE_CURVE('',#18046,#16947,#18054,.T.); +#18054 = CIRCLE('',#18055,0.31); +#18055 = AXIS2_PLACEMENT_3D('',#18056,#18057,#18058); +#18056 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#18057 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#18058 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#18059 = ORIENTED_EDGE('',*,*,#16946,.T.); +#18060 = PLANE('',#18061); +#18061 = AXIS2_PLACEMENT_3D('',#18062,#18063,#18064); +#18062 = CARTESIAN_POINT('',(-2.476022294864,1.7,0.454762084394)); +#18063 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#18064 = DIRECTION('',(0.,-0.,1.)); +#18065 = ADVANCED_FACE('',(#18066),#18085,.F.); +#18066 = FACE_BOUND('',#18067,.F.); +#18067 = EDGE_LOOP('',(#18068,#18069,#18078,#18084)); +#18068 = ORIENTED_EDGE('',*,*,#16576,.T.); +#18069 = ORIENTED_EDGE('',*,*,#18070,.T.); +#18070 = EDGE_CURVE('',#16569,#18071,#18073,.T.); +#18071 = VERTEX_POINT('',#18072); +#18072 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.612364817767)); +#18073 = CIRCLE('',#18074,0.1); +#18074 = AXIS2_PLACEMENT_3D('',#18075,#18076,#18077); +#18075 = CARTESIAN_POINT('',(-2.25,2.11,0.595)); +#18076 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#18077 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#18078 = ORIENTED_EDGE('',*,*,#18079,.F.); +#18079 = EDGE_CURVE('',#17987,#18071,#18080,.T.); +#18080 = LINE('',#18081,#18082); +#18081 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#18082 = VECTOR('',#18083,1.); +#18083 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#18084 = ORIENTED_EDGE('',*,*,#17986,.F.); +#18085 = CYLINDRICAL_SURFACE('',#18086,0.1); +#18086 = AXIS2_PLACEMENT_3D('',#18087,#18088,#18089); +#18087 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#18088 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#18089 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#18090 = ADVANCED_FACE('',(#18091),#18162,.T.); +#18091 = FACE_BOUND('',#18092,.T.); +#18092 = EDGE_LOOP('',(#18093,#18094,#18095,#18096,#18104,#18113,#18121, + #18129,#18137,#18146,#18154,#18161)); +#18093 = ORIENTED_EDGE('',*,*,#16590,.F.); +#18094 = ORIENTED_EDGE('',*,*,#16568,.T.); +#18095 = ORIENTED_EDGE('',*,*,#18070,.T.); +#18096 = ORIENTED_EDGE('',*,*,#18097,.T.); +#18097 = EDGE_CURVE('',#18071,#18098,#18100,.T.); +#18098 = VERTEX_POINT('',#18099); +#18099 = CARTESIAN_POINT('',(-2.404962786068,2.11,0.256169064923)); +#18100 = LINE('',#18101,#18102); +#18101 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.612364817767)); +#18102 = VECTOR('',#18103,1.); +#18103 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#18104 = ORIENTED_EDGE('',*,*,#18105,.T.); +#18105 = EDGE_CURVE('',#18098,#18106,#18108,.T.); +#18106 = VERTEX_POINT('',#18107); +#18107 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.)); +#18108 = CIRCLE('',#18109,0.31); +#18109 = AXIS2_PLACEMENT_3D('',#18110,#18111,#18112); +#18110 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.31)); +#18111 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#18112 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#18113 = ORIENTED_EDGE('',*,*,#18114,.T.); +#18114 = EDGE_CURVE('',#18106,#18115,#18117,.T.); +#18115 = VERTEX_POINT('',#18116); +#18116 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#18117 = LINE('',#18118,#18119); +#18118 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.)); +#18119 = VECTOR('',#18120,1.); +#18120 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#18121 = ORIENTED_EDGE('',*,*,#18122,.T.); +#18122 = EDGE_CURVE('',#18115,#18123,#18125,.T.); +#18123 = VERTEX_POINT('',#18124); +#18124 = CARTESIAN_POINT('',(-3.,2.11,0.21)); +#18125 = LINE('',#18126,#18127); +#18126 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#18127 = VECTOR('',#18128,1.); +#18128 = DIRECTION('',(0.,0.,1.)); +#18129 = ORIENTED_EDGE('',*,*,#18130,.T.); +#18130 = EDGE_CURVE('',#18123,#18131,#18133,.T.); +#18131 = VERTEX_POINT('',#18132); +#18132 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.21)); +#18133 = LINE('',#18134,#18135); +#18134 = CARTESIAN_POINT('',(-3.,2.11,0.21)); +#18135 = VECTOR('',#18136,1.); +#18136 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#18137 = ORIENTED_EDGE('',*,*,#18138,.T.); +#18138 = EDGE_CURVE('',#18131,#18139,#18141,.T.); +#18139 = VERTEX_POINT('',#18140); +#18140 = CARTESIAN_POINT('',(-2.611772414201,2.11,0.292635182233)); +#18141 = CIRCLE('',#18142,0.1); +#18142 = AXIS2_PLACEMENT_3D('',#18143,#18144,#18145); +#18143 = CARTESIAN_POINT('',(-2.710253189502,2.11,0.31)); +#18144 = DIRECTION('',(-1.144237745222E-17,-1.,-1.994335428641E-48)); +#18145 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#18146 = ORIENTED_EDGE('',*,*,#18147,.T.); +#18147 = EDGE_CURVE('',#18139,#18148,#18150,.T.); +#18148 = VERTEX_POINT('',#18149); +#18149 = CARTESIAN_POINT('',(-2.555290403434,2.11,0.648830935077)); +#18150 = LINE('',#18151,#18152); +#18151 = CARTESIAN_POINT('',(-2.611772414201,2.11,0.292635182233)); +#18152 = VECTOR('',#18153,1.); +#18153 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#18154 = ORIENTED_EDGE('',*,*,#18155,.T.); +#18155 = EDGE_CURVE('',#18148,#16955,#18156,.T.); +#18156 = CIRCLE('',#18157,0.31); +#18157 = AXIS2_PLACEMENT_3D('',#18158,#18159,#18160); +#18158 = CARTESIAN_POINT('',(-2.25,2.11,0.595)); +#18159 = DIRECTION('',(1.144237745222E-17,1.,-2.70085641703E-34)); +#18160 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#18161 = ORIENTED_EDGE('',*,*,#16962,.T.); +#18162 = PLANE('',#18163); +#18163 = AXIS2_PLACEMENT_3D('',#18164,#18165,#18166); +#18164 = CARTESIAN_POINT('',(-2.476022294864,2.11,0.454762084394)); +#18165 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#18166 = DIRECTION('',(0.,-0.,1.)); +#18167 = ADVANCED_FACE('',(#18168),#18247,.F.); +#18168 = FACE_BOUND('',#18169,.F.); +#18169 = EDGE_LOOP('',(#18170,#18171,#18172,#18181,#18189,#18198,#18206, + #18214,#18222,#18231,#18239,#18246)); +#18170 = ORIENTED_EDGE('',*,*,#16609,.F.); +#18171 = ORIENTED_EDGE('',*,*,#16624,.T.); +#18172 = ORIENTED_EDGE('',*,*,#18173,.T.); +#18173 = EDGE_CURVE('',#16625,#18174,#18176,.T.); +#18174 = VERTEX_POINT('',#18175); +#18175 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#18176 = CIRCLE('',#18177,0.1); +#18177 = AXIS2_PLACEMENT_3D('',#18178,#18179,#18180); +#18178 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#18179 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18180 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18181 = ORIENTED_EDGE('',*,*,#18182,.T.); +#18182 = EDGE_CURVE('',#18174,#18183,#18185,.T.); +#18183 = VERTEX_POINT('',#18184); +#18184 = CARTESIAN_POINT('',(2.404962786068,2.11,0.256169064923)); +#18185 = LINE('',#18186,#18187); +#18186 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#18187 = VECTOR('',#18188,1.); +#18188 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18189 = ORIENTED_EDGE('',*,*,#18190,.T.); +#18190 = EDGE_CURVE('',#18183,#18191,#18193,.T.); +#18191 = VERTEX_POINT('',#18192); +#18192 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#18193 = CIRCLE('',#18194,0.31); +#18194 = AXIS2_PLACEMENT_3D('',#18195,#18196,#18197); +#18195 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#18196 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18197 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18198 = ORIENTED_EDGE('',*,*,#18199,.T.); +#18199 = EDGE_CURVE('',#18191,#18200,#18202,.T.); +#18200 = VERTEX_POINT('',#18201); +#18201 = CARTESIAN_POINT('',(3.,2.11,0.)); +#18202 = LINE('',#18203,#18204); +#18203 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#18204 = VECTOR('',#18205,1.); +#18205 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18206 = ORIENTED_EDGE('',*,*,#18207,.T.); +#18207 = EDGE_CURVE('',#18200,#18208,#18210,.T.); +#18208 = VERTEX_POINT('',#18209); +#18209 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#18210 = LINE('',#18211,#18212); +#18211 = CARTESIAN_POINT('',(3.,2.11,0.)); +#18212 = VECTOR('',#18213,1.); +#18213 = DIRECTION('',(0.,0.,1.)); +#18214 = ORIENTED_EDGE('',*,*,#18215,.T.); +#18215 = EDGE_CURVE('',#18208,#18216,#18218,.T.); +#18216 = VERTEX_POINT('',#18217); +#18217 = CARTESIAN_POINT('',(2.710253189502,2.11,0.21)); +#18218 = LINE('',#18219,#18220); +#18219 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#18220 = VECTOR('',#18221,1.); +#18221 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18222 = ORIENTED_EDGE('',*,*,#18223,.T.); +#18223 = EDGE_CURVE('',#18216,#18224,#18226,.T.); +#18224 = VERTEX_POINT('',#18225); +#18225 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#18226 = CIRCLE('',#18227,0.1); +#18227 = AXIS2_PLACEMENT_3D('',#18228,#18229,#18230); +#18228 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#18229 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18230 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18231 = ORIENTED_EDGE('',*,*,#18232,.T.); +#18232 = EDGE_CURVE('',#18224,#18233,#18235,.T.); +#18233 = VERTEX_POINT('',#18234); +#18234 = CARTESIAN_POINT('',(2.555290403434,2.11,0.648830935077)); +#18235 = LINE('',#18236,#18237); +#18236 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#18237 = VECTOR('',#18238,1.); +#18238 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18239 = ORIENTED_EDGE('',*,*,#18240,.T.); +#18240 = EDGE_CURVE('',#18233,#17234,#18241,.T.); +#18241 = CIRCLE('',#18242,0.31); +#18242 = AXIS2_PLACEMENT_3D('',#18243,#18244,#18245); +#18243 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#18244 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18245 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18246 = ORIENTED_EDGE('',*,*,#17233,.T.); +#18247 = PLANE('',#18248); +#18248 = AXIS2_PLACEMENT_3D('',#18249,#18250,#18251); +#18249 = CARTESIAN_POINT('',(2.476022294864,2.11,0.454762084394)); +#18250 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18251 = DIRECTION('',(0.,0.,1.)); +#18252 = ADVANCED_FACE('',(#18253),#18272,.F.); +#18253 = FACE_BOUND('',#18254,.F.); +#18254 = EDGE_LOOP('',(#18255,#18256,#18265,#18271)); +#18255 = ORIENTED_EDGE('',*,*,#16641,.T.); +#18256 = ORIENTED_EDGE('',*,*,#18257,.T.); +#18257 = EDGE_CURVE('',#16634,#18258,#18260,.T.); +#18258 = VERTEX_POINT('',#18259); +#18259 = CARTESIAN_POINT('',(2.348480775301,1.7,0.612364817767)); +#18260 = CIRCLE('',#18261,0.1); +#18261 = AXIS2_PLACEMENT_3D('',#18262,#18263,#18264); +#18262 = CARTESIAN_POINT('',(2.25,1.7,0.595)); +#18263 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18264 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18265 = ORIENTED_EDGE('',*,*,#18266,.F.); +#18266 = EDGE_CURVE('',#18174,#18258,#18267,.T.); +#18267 = LINE('',#18268,#18269); +#18268 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#18269 = VECTOR('',#18270,1.); +#18270 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18271 = ORIENTED_EDGE('',*,*,#18173,.F.); +#18272 = CYLINDRICAL_SURFACE('',#18273,0.1); +#18273 = AXIS2_PLACEMENT_3D('',#18274,#18275,#18276); +#18274 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#18275 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18276 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18277 = ADVANCED_FACE('',(#18278),#18349,.T.); +#18278 = FACE_BOUND('',#18279,.T.); +#18279 = EDGE_LOOP('',(#18280,#18281,#18282,#18283,#18291,#18300,#18308, + #18316,#18324,#18333,#18341,#18348)); +#18280 = ORIENTED_EDGE('',*,*,#16655,.F.); +#18281 = ORIENTED_EDGE('',*,*,#16633,.T.); +#18282 = ORIENTED_EDGE('',*,*,#18257,.T.); +#18283 = ORIENTED_EDGE('',*,*,#18284,.T.); +#18284 = EDGE_CURVE('',#18258,#18285,#18287,.T.); +#18285 = VERTEX_POINT('',#18286); +#18286 = CARTESIAN_POINT('',(2.404962786068,1.7,0.256169064923)); +#18287 = LINE('',#18288,#18289); +#18288 = CARTESIAN_POINT('',(2.348480775301,1.7,0.612364817767)); +#18289 = VECTOR('',#18290,1.); +#18290 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18291 = ORIENTED_EDGE('',*,*,#18292,.T.); +#18292 = EDGE_CURVE('',#18285,#18293,#18295,.T.); +#18293 = VERTEX_POINT('',#18294); +#18294 = CARTESIAN_POINT('',(2.710253189502,1.7,0.)); +#18295 = CIRCLE('',#18296,0.31); +#18296 = AXIS2_PLACEMENT_3D('',#18297,#18298,#18299); +#18297 = CARTESIAN_POINT('',(2.710253189502,1.7,0.31)); +#18298 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18299 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18300 = ORIENTED_EDGE('',*,*,#18301,.T.); +#18301 = EDGE_CURVE('',#18293,#18302,#18304,.T.); +#18302 = VERTEX_POINT('',#18303); +#18303 = CARTESIAN_POINT('',(3.,1.7,0.)); +#18304 = LINE('',#18305,#18306); +#18305 = CARTESIAN_POINT('',(2.710253189502,1.7,0.)); +#18306 = VECTOR('',#18307,1.); +#18307 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18308 = ORIENTED_EDGE('',*,*,#18309,.T.); +#18309 = EDGE_CURVE('',#18302,#18310,#18312,.T.); +#18310 = VERTEX_POINT('',#18311); +#18311 = CARTESIAN_POINT('',(3.,1.7,0.21)); +#18312 = LINE('',#18313,#18314); +#18313 = CARTESIAN_POINT('',(3.,1.7,0.)); +#18314 = VECTOR('',#18315,1.); +#18315 = DIRECTION('',(0.,0.,1.)); +#18316 = ORIENTED_EDGE('',*,*,#18317,.T.); +#18317 = EDGE_CURVE('',#18310,#18318,#18320,.T.); +#18318 = VERTEX_POINT('',#18319); +#18319 = CARTESIAN_POINT('',(2.710253189502,1.7,0.21)); +#18320 = LINE('',#18321,#18322); +#18321 = CARTESIAN_POINT('',(3.,1.7,0.21)); +#18322 = VECTOR('',#18323,1.); +#18323 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18324 = ORIENTED_EDGE('',*,*,#18325,.T.); +#18325 = EDGE_CURVE('',#18318,#18326,#18328,.T.); +#18326 = VERTEX_POINT('',#18327); +#18327 = CARTESIAN_POINT('',(2.611772414201,1.7,0.292635182233)); +#18328 = CIRCLE('',#18329,0.1); +#18329 = AXIS2_PLACEMENT_3D('',#18330,#18331,#18332); +#18330 = CARTESIAN_POINT('',(2.710253189502,1.7,0.31)); +#18331 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18332 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18333 = ORIENTED_EDGE('',*,*,#18334,.T.); +#18334 = EDGE_CURVE('',#18326,#18335,#18337,.T.); +#18335 = VERTEX_POINT('',#18336); +#18336 = CARTESIAN_POINT('',(2.555290403434,1.7,0.648830935077)); +#18337 = LINE('',#18338,#18339); +#18338 = CARTESIAN_POINT('',(2.611772414201,1.7,0.292635182233)); +#18339 = VECTOR('',#18340,1.); +#18340 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18341 = ORIENTED_EDGE('',*,*,#18342,.T.); +#18342 = EDGE_CURVE('',#18335,#17242,#18343,.T.); +#18343 = CIRCLE('',#18344,0.31); +#18344 = AXIS2_PLACEMENT_3D('',#18345,#18346,#18347); +#18345 = CARTESIAN_POINT('',(2.25,1.7,0.595)); +#18346 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18347 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18348 = ORIENTED_EDGE('',*,*,#17249,.T.); +#18349 = PLANE('',#18350); +#18350 = AXIS2_PLACEMENT_3D('',#18351,#18352,#18353); +#18351 = CARTESIAN_POINT('',(2.476022294864,1.7,0.454762084394)); +#18352 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18353 = DIRECTION('',(0.,0.,1.)); +#18354 = ADVANCED_FACE('',(#18355),#18366,.F.); +#18355 = FACE_BOUND('',#18356,.F.); +#18356 = EDGE_LOOP('',(#18357,#18358,#18359,#18365)); +#18357 = ORIENTED_EDGE('',*,*,#17255,.F.); +#18358 = ORIENTED_EDGE('',*,*,#16672,.T.); +#18359 = ORIENTED_EDGE('',*,*,#18360,.T.); +#18360 = EDGE_CURVE('',#16665,#17156,#18361,.T.); +#18361 = LINE('',#18362,#18363); +#18362 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#18363 = VECTOR('',#18364,1.); +#18364 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18365 = ORIENTED_EDGE('',*,*,#17155,.F.); +#18366 = PLANE('',#18367); +#18367 = AXIS2_PLACEMENT_3D('',#18368,#18369,#18370); +#18368 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#18369 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#18370 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#18371 = ADVANCED_FACE('',(#18372),#18458,.F.); +#18372 = FACE_BOUND('',#18373,.F.); +#18373 = EDGE_LOOP('',(#18374,#18375,#18376,#18385,#18393,#18402,#18410, + #18418,#18426,#18435,#18443,#18452)); +#18374 = ORIENTED_EDGE('',*,*,#16664,.F.); +#18375 = ORIENTED_EDGE('',*,*,#16686,.T.); +#18376 = ORIENTED_EDGE('',*,*,#18377,.T.); +#18377 = EDGE_CURVE('',#16687,#18378,#18380,.T.); +#18378 = VERTEX_POINT('',#18379); +#18379 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#18380 = CIRCLE('',#18381,0.1); +#18381 = AXIS2_PLACEMENT_3D('',#18382,#18383,#18384); +#18382 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#18383 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18384 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18385 = ORIENTED_EDGE('',*,*,#18386,.T.); +#18386 = EDGE_CURVE('',#18378,#18387,#18389,.T.); +#18387 = VERTEX_POINT('',#18388); +#18388 = CARTESIAN_POINT('',(2.404962786068,0.84,0.256169064923)); +#18389 = LINE('',#18390,#18391); +#18390 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#18391 = VECTOR('',#18392,1.); +#18392 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18393 = ORIENTED_EDGE('',*,*,#18394,.T.); +#18394 = EDGE_CURVE('',#18387,#18395,#18397,.T.); +#18395 = VERTEX_POINT('',#18396); +#18396 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#18397 = CIRCLE('',#18398,0.31); +#18398 = AXIS2_PLACEMENT_3D('',#18399,#18400,#18401); +#18399 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#18400 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18401 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18402 = ORIENTED_EDGE('',*,*,#18403,.T.); +#18403 = EDGE_CURVE('',#18395,#18404,#18406,.T.); +#18404 = VERTEX_POINT('',#18405); +#18405 = CARTESIAN_POINT('',(3.,0.84,0.)); +#18406 = LINE('',#18407,#18408); +#18407 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#18408 = VECTOR('',#18409,1.); +#18409 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18410 = ORIENTED_EDGE('',*,*,#18411,.T.); +#18411 = EDGE_CURVE('',#18404,#18412,#18414,.T.); +#18412 = VERTEX_POINT('',#18413); +#18413 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#18414 = LINE('',#18415,#18416); +#18415 = CARTESIAN_POINT('',(3.,0.84,0.)); +#18416 = VECTOR('',#18417,1.); +#18417 = DIRECTION('',(0.,0.,1.)); +#18418 = ORIENTED_EDGE('',*,*,#18419,.T.); +#18419 = EDGE_CURVE('',#18412,#18420,#18422,.T.); +#18420 = VERTEX_POINT('',#18421); +#18421 = CARTESIAN_POINT('',(2.710253189502,0.84,0.21)); +#18422 = LINE('',#18423,#18424); +#18423 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#18424 = VECTOR('',#18425,1.); +#18425 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18426 = ORIENTED_EDGE('',*,*,#18427,.T.); +#18427 = EDGE_CURVE('',#18420,#18428,#18430,.T.); +#18428 = VERTEX_POINT('',#18429); +#18429 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#18430 = CIRCLE('',#18431,0.1); +#18431 = AXIS2_PLACEMENT_3D('',#18432,#18433,#18434); +#18432 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#18433 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18434 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18435 = ORIENTED_EDGE('',*,*,#18436,.T.); +#18436 = EDGE_CURVE('',#18428,#18437,#18439,.T.); +#18437 = VERTEX_POINT('',#18438); +#18438 = CARTESIAN_POINT('',(2.555290403434,0.84,0.648830935077)); +#18439 = LINE('',#18440,#18441); +#18440 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#18441 = VECTOR('',#18442,1.); +#18442 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18443 = ORIENTED_EDGE('',*,*,#18444,.T.); +#18444 = EDGE_CURVE('',#18437,#18445,#18447,.T.); +#18445 = VERTEX_POINT('',#18446); +#18446 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#18447 = CIRCLE('',#18448,0.31); +#18448 = AXIS2_PLACEMENT_3D('',#18449,#18450,#18451); +#18449 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#18450 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18451 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18452 = ORIENTED_EDGE('',*,*,#18453,.T.); +#18453 = EDGE_CURVE('',#18445,#16665,#18454,.T.); +#18454 = LINE('',#18455,#18456); +#18455 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#18456 = VECTOR('',#18457,1.); +#18457 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18458 = PLANE('',#18459); +#18459 = AXIS2_PLACEMENT_3D('',#18460,#18461,#18462); +#18460 = CARTESIAN_POINT('',(2.476022294864,0.84,0.454762084394)); +#18461 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18462 = DIRECTION('',(0.,0.,1.)); +#18463 = ADVANCED_FACE('',(#18464),#18483,.F.); +#18464 = FACE_BOUND('',#18465,.F.); +#18465 = EDGE_LOOP('',(#18466,#18467,#18476,#18482)); +#18466 = ORIENTED_EDGE('',*,*,#16703,.T.); +#18467 = ORIENTED_EDGE('',*,*,#18468,.T.); +#18468 = EDGE_CURVE('',#16696,#18469,#18471,.T.); +#18469 = VERTEX_POINT('',#18470); +#18470 = CARTESIAN_POINT('',(2.348480775301,0.43,0.612364817767)); +#18471 = CIRCLE('',#18472,0.1); +#18472 = AXIS2_PLACEMENT_3D('',#18473,#18474,#18475); +#18473 = CARTESIAN_POINT('',(2.25,0.43,0.595)); +#18474 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18475 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18476 = ORIENTED_EDGE('',*,*,#18477,.F.); +#18477 = EDGE_CURVE('',#18378,#18469,#18478,.T.); +#18478 = LINE('',#18479,#18480); +#18479 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#18480 = VECTOR('',#18481,1.); +#18481 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18482 = ORIENTED_EDGE('',*,*,#18377,.F.); +#18483 = CYLINDRICAL_SURFACE('',#18484,0.1); +#18484 = AXIS2_PLACEMENT_3D('',#18485,#18486,#18487); +#18485 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#18486 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18487 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18488 = ADVANCED_FACE('',(#18489),#18567,.T.); +#18489 = FACE_BOUND('',#18490,.T.); +#18490 = EDGE_LOOP('',(#18491,#18492,#18493,#18494,#18502,#18511,#18519, + #18527,#18535,#18544,#18552,#18561)); +#18491 = ORIENTED_EDGE('',*,*,#16717,.F.); +#18492 = ORIENTED_EDGE('',*,*,#16695,.T.); +#18493 = ORIENTED_EDGE('',*,*,#18468,.T.); +#18494 = ORIENTED_EDGE('',*,*,#18495,.T.); +#18495 = EDGE_CURVE('',#18469,#18496,#18498,.T.); +#18496 = VERTEX_POINT('',#18497); +#18497 = CARTESIAN_POINT('',(2.404962786068,0.43,0.256169064923)); +#18498 = LINE('',#18499,#18500); +#18499 = CARTESIAN_POINT('',(2.348480775301,0.43,0.612364817767)); +#18500 = VECTOR('',#18501,1.); +#18501 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18502 = ORIENTED_EDGE('',*,*,#18503,.T.); +#18503 = EDGE_CURVE('',#18496,#18504,#18506,.T.); +#18504 = VERTEX_POINT('',#18505); +#18505 = CARTESIAN_POINT('',(2.710253189502,0.43,0.)); +#18506 = CIRCLE('',#18507,0.31); +#18507 = AXIS2_PLACEMENT_3D('',#18508,#18509,#18510); +#18508 = CARTESIAN_POINT('',(2.710253189502,0.43,0.31)); +#18509 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18510 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18511 = ORIENTED_EDGE('',*,*,#18512,.T.); +#18512 = EDGE_CURVE('',#18504,#18513,#18515,.T.); +#18513 = VERTEX_POINT('',#18514); +#18514 = CARTESIAN_POINT('',(3.,0.43,0.)); +#18515 = LINE('',#18516,#18517); +#18516 = CARTESIAN_POINT('',(2.710253189502,0.43,0.)); +#18517 = VECTOR('',#18518,1.); +#18518 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18519 = ORIENTED_EDGE('',*,*,#18520,.T.); +#18520 = EDGE_CURVE('',#18513,#18521,#18523,.T.); +#18521 = VERTEX_POINT('',#18522); +#18522 = CARTESIAN_POINT('',(3.,0.43,0.21)); +#18523 = LINE('',#18524,#18525); +#18524 = CARTESIAN_POINT('',(3.,0.43,0.)); +#18525 = VECTOR('',#18526,1.); +#18526 = DIRECTION('',(0.,0.,1.)); +#18527 = ORIENTED_EDGE('',*,*,#18528,.T.); +#18528 = EDGE_CURVE('',#18521,#18529,#18531,.T.); +#18529 = VERTEX_POINT('',#18530); +#18530 = CARTESIAN_POINT('',(2.710253189502,0.43,0.21)); +#18531 = LINE('',#18532,#18533); +#18532 = CARTESIAN_POINT('',(3.,0.43,0.21)); +#18533 = VECTOR('',#18534,1.); +#18534 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18535 = ORIENTED_EDGE('',*,*,#18536,.T.); +#18536 = EDGE_CURVE('',#18529,#18537,#18539,.T.); +#18537 = VERTEX_POINT('',#18538); +#18538 = CARTESIAN_POINT('',(2.611772414201,0.43,0.292635182233)); +#18539 = CIRCLE('',#18540,0.1); +#18540 = AXIS2_PLACEMENT_3D('',#18541,#18542,#18543); +#18541 = CARTESIAN_POINT('',(2.710253189502,0.43,0.31)); +#18542 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18543 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18544 = ORIENTED_EDGE('',*,*,#18545,.T.); +#18545 = EDGE_CURVE('',#18537,#18546,#18548,.T.); +#18546 = VERTEX_POINT('',#18547); +#18547 = CARTESIAN_POINT('',(2.555290403434,0.43,0.648830935077)); +#18548 = LINE('',#18549,#18550); +#18549 = CARTESIAN_POINT('',(2.611772414201,0.43,0.292635182233)); +#18550 = VECTOR('',#18551,1.); +#18551 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18552 = ORIENTED_EDGE('',*,*,#18553,.T.); +#18553 = EDGE_CURVE('',#18546,#18554,#18556,.T.); +#18554 = VERTEX_POINT('',#18555); +#18555 = CARTESIAN_POINT('',(2.25,0.43,0.905)); +#18556 = CIRCLE('',#18557,0.31); +#18557 = AXIS2_PLACEMENT_3D('',#18558,#18559,#18560); +#18558 = CARTESIAN_POINT('',(2.25,0.43,0.595)); +#18559 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18560 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18561 = ORIENTED_EDGE('',*,*,#18562,.T.); +#18562 = EDGE_CURVE('',#18554,#16718,#18563,.T.); +#18563 = LINE('',#18564,#18565); +#18564 = CARTESIAN_POINT('',(2.25,0.43,0.905)); +#18565 = VECTOR('',#18566,1.); +#18566 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18567 = PLANE('',#18568); +#18568 = AXIS2_PLACEMENT_3D('',#18569,#18570,#18571); +#18569 = CARTESIAN_POINT('',(2.476022294864,0.43,0.454762084394)); +#18570 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18571 = DIRECTION('',(0.,0.,1.)); +#18572 = ADVANCED_FACE('',(#18573),#18589,.F.); +#18573 = FACE_BOUND('',#18574,.F.); +#18574 = EDGE_LOOP('',(#18575,#18581,#18582,#18588)); +#18575 = ORIENTED_EDGE('',*,*,#18576,.F.); +#18576 = EDGE_CURVE('',#16718,#17164,#18577,.T.); +#18577 = LINE('',#18578,#18579); +#18578 = CARTESIAN_POINT('',(2.25,0.43,0.905)); +#18579 = VECTOR('',#18580,1.); +#18580 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18581 = ORIENTED_EDGE('',*,*,#16734,.T.); +#18582 = ORIENTED_EDGE('',*,*,#18583,.T.); +#18583 = EDGE_CURVE('',#16727,#17172,#18584,.T.); +#18584 = LINE('',#18585,#18586); +#18585 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#18586 = VECTOR('',#18587,1.); +#18587 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18588 = ORIENTED_EDGE('',*,*,#17171,.F.); +#18589 = PLANE('',#18590); +#18590 = AXIS2_PLACEMENT_3D('',#18591,#18592,#18593); +#18591 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#18592 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#18593 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#18594 = ADVANCED_FACE('',(#18595),#18681,.F.); +#18595 = FACE_BOUND('',#18596,.F.); +#18596 = EDGE_LOOP('',(#18597,#18598,#18599,#18608,#18616,#18625,#18633, + #18641,#18649,#18658,#18666,#18675)); +#18597 = ORIENTED_EDGE('',*,*,#16726,.F.); +#18598 = ORIENTED_EDGE('',*,*,#16748,.T.); +#18599 = ORIENTED_EDGE('',*,*,#18600,.T.); +#18600 = EDGE_CURVE('',#16749,#18601,#18603,.T.); +#18601 = VERTEX_POINT('',#18602); +#18602 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#18603 = CIRCLE('',#18604,0.1); +#18604 = AXIS2_PLACEMENT_3D('',#18605,#18606,#18607); +#18605 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#18606 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18607 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18608 = ORIENTED_EDGE('',*,*,#18609,.T.); +#18609 = EDGE_CURVE('',#18601,#18610,#18612,.T.); +#18610 = VERTEX_POINT('',#18611); +#18611 = CARTESIAN_POINT('',(2.404962786068,-0.43,0.256169064923)); +#18612 = LINE('',#18613,#18614); +#18613 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#18614 = VECTOR('',#18615,1.); +#18615 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18616 = ORIENTED_EDGE('',*,*,#18617,.T.); +#18617 = EDGE_CURVE('',#18610,#18618,#18620,.T.); +#18618 = VERTEX_POINT('',#18619); +#18619 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#18620 = CIRCLE('',#18621,0.31); +#18621 = AXIS2_PLACEMENT_3D('',#18622,#18623,#18624); +#18622 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#18623 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18624 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18625 = ORIENTED_EDGE('',*,*,#18626,.T.); +#18626 = EDGE_CURVE('',#18618,#18627,#18629,.T.); +#18627 = VERTEX_POINT('',#18628); +#18628 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#18629 = LINE('',#18630,#18631); +#18630 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#18631 = VECTOR('',#18632,1.); +#18632 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18633 = ORIENTED_EDGE('',*,*,#18634,.T.); +#18634 = EDGE_CURVE('',#18627,#18635,#18637,.T.); +#18635 = VERTEX_POINT('',#18636); +#18636 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#18637 = LINE('',#18638,#18639); +#18638 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#18639 = VECTOR('',#18640,1.); +#18640 = DIRECTION('',(0.,0.,1.)); +#18641 = ORIENTED_EDGE('',*,*,#18642,.T.); +#18642 = EDGE_CURVE('',#18635,#18643,#18645,.T.); +#18643 = VERTEX_POINT('',#18644); +#18644 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.21)); +#18645 = LINE('',#18646,#18647); +#18646 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#18647 = VECTOR('',#18648,1.); +#18648 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18649 = ORIENTED_EDGE('',*,*,#18650,.T.); +#18650 = EDGE_CURVE('',#18643,#18651,#18653,.T.); +#18651 = VERTEX_POINT('',#18652); +#18652 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#18653 = CIRCLE('',#18654,0.1); +#18654 = AXIS2_PLACEMENT_3D('',#18655,#18656,#18657); +#18655 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#18656 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18657 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18658 = ORIENTED_EDGE('',*,*,#18659,.T.); +#18659 = EDGE_CURVE('',#18651,#18660,#18662,.T.); +#18660 = VERTEX_POINT('',#18661); +#18661 = CARTESIAN_POINT('',(2.555290403434,-0.43,0.648830935077)); +#18662 = LINE('',#18663,#18664); +#18663 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#18664 = VECTOR('',#18665,1.); +#18665 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18666 = ORIENTED_EDGE('',*,*,#18667,.T.); +#18667 = EDGE_CURVE('',#18660,#18668,#18670,.T.); +#18668 = VERTEX_POINT('',#18669); +#18669 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#18670 = CIRCLE('',#18671,0.31); +#18671 = AXIS2_PLACEMENT_3D('',#18672,#18673,#18674); +#18672 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#18673 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18674 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18675 = ORIENTED_EDGE('',*,*,#18676,.T.); +#18676 = EDGE_CURVE('',#18668,#16727,#18677,.T.); +#18677 = LINE('',#18678,#18679); +#18678 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#18679 = VECTOR('',#18680,1.); +#18680 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18681 = PLANE('',#18682); +#18682 = AXIS2_PLACEMENT_3D('',#18683,#18684,#18685); +#18683 = CARTESIAN_POINT('',(2.476022294864,-0.43,0.454762084394)); +#18684 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18685 = DIRECTION('',(0.,0.,1.)); +#18686 = ADVANCED_FACE('',(#18687),#18706,.F.); +#18687 = FACE_BOUND('',#18688,.F.); +#18688 = EDGE_LOOP('',(#18689,#18690,#18699,#18705)); +#18689 = ORIENTED_EDGE('',*,*,#16765,.T.); +#18690 = ORIENTED_EDGE('',*,*,#18691,.T.); +#18691 = EDGE_CURVE('',#16758,#18692,#18694,.T.); +#18692 = VERTEX_POINT('',#18693); +#18693 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.612364817767)); +#18694 = CIRCLE('',#18695,0.1); +#18695 = AXIS2_PLACEMENT_3D('',#18696,#18697,#18698); +#18696 = CARTESIAN_POINT('',(2.25,-0.84,0.595)); +#18697 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18698 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18699 = ORIENTED_EDGE('',*,*,#18700,.F.); +#18700 = EDGE_CURVE('',#18601,#18692,#18701,.T.); +#18701 = LINE('',#18702,#18703); +#18702 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#18703 = VECTOR('',#18704,1.); +#18704 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18705 = ORIENTED_EDGE('',*,*,#18600,.F.); +#18706 = CYLINDRICAL_SURFACE('',#18707,0.1); +#18707 = AXIS2_PLACEMENT_3D('',#18708,#18709,#18710); +#18708 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#18709 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18710 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18711 = ADVANCED_FACE('',(#18712),#18790,.T.); +#18712 = FACE_BOUND('',#18713,.T.); +#18713 = EDGE_LOOP('',(#18714,#18715,#18716,#18717,#18725,#18734,#18742, + #18750,#18758,#18767,#18775,#18784)); +#18714 = ORIENTED_EDGE('',*,*,#16779,.F.); +#18715 = ORIENTED_EDGE('',*,*,#16757,.T.); +#18716 = ORIENTED_EDGE('',*,*,#18691,.T.); +#18717 = ORIENTED_EDGE('',*,*,#18718,.T.); +#18718 = EDGE_CURVE('',#18692,#18719,#18721,.T.); +#18719 = VERTEX_POINT('',#18720); +#18720 = CARTESIAN_POINT('',(2.404962786068,-0.84,0.256169064923)); +#18721 = LINE('',#18722,#18723); +#18722 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.612364817767)); +#18723 = VECTOR('',#18724,1.); +#18724 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18725 = ORIENTED_EDGE('',*,*,#18726,.T.); +#18726 = EDGE_CURVE('',#18719,#18727,#18729,.T.); +#18727 = VERTEX_POINT('',#18728); +#18728 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.)); +#18729 = CIRCLE('',#18730,0.31); +#18730 = AXIS2_PLACEMENT_3D('',#18731,#18732,#18733); +#18731 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.31)); +#18732 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18733 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18734 = ORIENTED_EDGE('',*,*,#18735,.T.); +#18735 = EDGE_CURVE('',#18727,#18736,#18738,.T.); +#18736 = VERTEX_POINT('',#18737); +#18737 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#18738 = LINE('',#18739,#18740); +#18739 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.)); +#18740 = VECTOR('',#18741,1.); +#18741 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18742 = ORIENTED_EDGE('',*,*,#18743,.T.); +#18743 = EDGE_CURVE('',#18736,#18744,#18746,.T.); +#18744 = VERTEX_POINT('',#18745); +#18745 = CARTESIAN_POINT('',(3.,-0.84,0.21)); +#18746 = LINE('',#18747,#18748); +#18747 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#18748 = VECTOR('',#18749,1.); +#18749 = DIRECTION('',(0.,0.,1.)); +#18750 = ORIENTED_EDGE('',*,*,#18751,.T.); +#18751 = EDGE_CURVE('',#18744,#18752,#18754,.T.); +#18752 = VERTEX_POINT('',#18753); +#18753 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.21)); +#18754 = LINE('',#18755,#18756); +#18755 = CARTESIAN_POINT('',(3.,-0.84,0.21)); +#18756 = VECTOR('',#18757,1.); +#18757 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18758 = ORIENTED_EDGE('',*,*,#18759,.T.); +#18759 = EDGE_CURVE('',#18752,#18760,#18762,.T.); +#18760 = VERTEX_POINT('',#18761); +#18761 = CARTESIAN_POINT('',(2.611772414201,-0.84,0.292635182233)); +#18762 = CIRCLE('',#18763,0.1); +#18763 = AXIS2_PLACEMENT_3D('',#18764,#18765,#18766); +#18764 = CARTESIAN_POINT('',(2.710253189502,-0.84,0.31)); +#18765 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18766 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18767 = ORIENTED_EDGE('',*,*,#18768,.T.); +#18768 = EDGE_CURVE('',#18760,#18769,#18771,.T.); +#18769 = VERTEX_POINT('',#18770); +#18770 = CARTESIAN_POINT('',(2.555290403434,-0.84,0.648830935077)); +#18771 = LINE('',#18772,#18773); +#18772 = CARTESIAN_POINT('',(2.611772414201,-0.84,0.292635182233)); +#18773 = VECTOR('',#18774,1.); +#18774 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18775 = ORIENTED_EDGE('',*,*,#18776,.T.); +#18776 = EDGE_CURVE('',#18769,#18777,#18779,.T.); +#18777 = VERTEX_POINT('',#18778); +#18778 = CARTESIAN_POINT('',(2.25,-0.84,0.905)); +#18779 = CIRCLE('',#18780,0.31); +#18780 = AXIS2_PLACEMENT_3D('',#18781,#18782,#18783); +#18781 = CARTESIAN_POINT('',(2.25,-0.84,0.595)); +#18782 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18783 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18784 = ORIENTED_EDGE('',*,*,#18785,.T.); +#18785 = EDGE_CURVE('',#18777,#16780,#18786,.T.); +#18786 = LINE('',#18787,#18788); +#18787 = CARTESIAN_POINT('',(2.25,-0.84,0.905)); +#18788 = VECTOR('',#18789,1.); +#18789 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18790 = PLANE('',#18791); +#18791 = AXIS2_PLACEMENT_3D('',#18792,#18793,#18794); +#18792 = CARTESIAN_POINT('',(2.476022294864,-0.84,0.454762084394)); +#18793 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18794 = DIRECTION('',(0.,0.,1.)); +#18795 = ADVANCED_FACE('',(#18796),#18812,.F.); +#18796 = FACE_BOUND('',#18797,.F.); +#18797 = EDGE_LOOP('',(#18798,#18804,#18805,#18811)); +#18798 = ORIENTED_EDGE('',*,*,#18799,.F.); +#18799 = EDGE_CURVE('',#16780,#17180,#18800,.T.); +#18800 = LINE('',#18801,#18802); +#18801 = CARTESIAN_POINT('',(2.25,-0.84,0.905)); +#18802 = VECTOR('',#18803,1.); +#18803 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18804 = ORIENTED_EDGE('',*,*,#16796,.T.); +#18805 = ORIENTED_EDGE('',*,*,#18806,.T.); +#18806 = EDGE_CURVE('',#16789,#17188,#18807,.T.); +#18807 = LINE('',#18808,#18809); +#18808 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#18809 = VECTOR('',#18810,1.); +#18810 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18811 = ORIENTED_EDGE('',*,*,#17187,.F.); +#18812 = PLANE('',#18813); +#18813 = AXIS2_PLACEMENT_3D('',#18814,#18815,#18816); +#18814 = CARTESIAN_POINT('',(-3.398748225007E-16,2.44975,0.905)); +#18815 = DIRECTION('',(5.214436594795E-32,-6.649901845667E-24,-1.)); +#18816 = DIRECTION('',(1.,1.692993148776E-16,5.214436482213E-32)); +#18817 = ADVANCED_FACE('',(#18818),#18904,.F.); +#18818 = FACE_BOUND('',#18819,.F.); +#18819 = EDGE_LOOP('',(#18820,#18821,#18822,#18831,#18839,#18848,#18856, + #18864,#18872,#18881,#18889,#18898)); +#18820 = ORIENTED_EDGE('',*,*,#16788,.F.); +#18821 = ORIENTED_EDGE('',*,*,#16810,.T.); +#18822 = ORIENTED_EDGE('',*,*,#18823,.T.); +#18823 = EDGE_CURVE('',#16811,#18824,#18826,.T.); +#18824 = VERTEX_POINT('',#18825); +#18825 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#18826 = CIRCLE('',#18827,0.1); +#18827 = AXIS2_PLACEMENT_3D('',#18828,#18829,#18830); +#18828 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#18829 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18830 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18831 = ORIENTED_EDGE('',*,*,#18832,.T.); +#18832 = EDGE_CURVE('',#18824,#18833,#18835,.T.); +#18833 = VERTEX_POINT('',#18834); +#18834 = CARTESIAN_POINT('',(2.404962786068,-1.7,0.256169064923)); +#18835 = LINE('',#18836,#18837); +#18836 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#18837 = VECTOR('',#18838,1.); +#18838 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18839 = ORIENTED_EDGE('',*,*,#18840,.T.); +#18840 = EDGE_CURVE('',#18833,#18841,#18843,.T.); +#18841 = VERTEX_POINT('',#18842); +#18842 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#18843 = CIRCLE('',#18844,0.31); +#18844 = AXIS2_PLACEMENT_3D('',#18845,#18846,#18847); +#18845 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#18846 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18847 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18848 = ORIENTED_EDGE('',*,*,#18849,.T.); +#18849 = EDGE_CURVE('',#18841,#18850,#18852,.T.); +#18850 = VERTEX_POINT('',#18851); +#18851 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#18852 = LINE('',#18853,#18854); +#18853 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#18854 = VECTOR('',#18855,1.); +#18855 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18856 = ORIENTED_EDGE('',*,*,#18857,.T.); +#18857 = EDGE_CURVE('',#18850,#18858,#18860,.T.); +#18858 = VERTEX_POINT('',#18859); +#18859 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#18860 = LINE('',#18861,#18862); +#18861 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#18862 = VECTOR('',#18863,1.); +#18863 = DIRECTION('',(0.,0.,1.)); +#18864 = ORIENTED_EDGE('',*,*,#18865,.T.); +#18865 = EDGE_CURVE('',#18858,#18866,#18868,.T.); +#18866 = VERTEX_POINT('',#18867); +#18867 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.21)); +#18868 = LINE('',#18869,#18870); +#18869 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#18870 = VECTOR('',#18871,1.); +#18871 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18872 = ORIENTED_EDGE('',*,*,#18873,.T.); +#18873 = EDGE_CURVE('',#18866,#18874,#18876,.T.); +#18874 = VERTEX_POINT('',#18875); +#18875 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#18876 = CIRCLE('',#18877,0.1); +#18877 = AXIS2_PLACEMENT_3D('',#18878,#18879,#18880); +#18878 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#18879 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18880 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18881 = ORIENTED_EDGE('',*,*,#18882,.T.); +#18882 = EDGE_CURVE('',#18874,#18883,#18885,.T.); +#18883 = VERTEX_POINT('',#18884); +#18884 = CARTESIAN_POINT('',(2.555290403434,-1.7,0.648830935077)); +#18885 = LINE('',#18886,#18887); +#18886 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#18887 = VECTOR('',#18888,1.); +#18888 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18889 = ORIENTED_EDGE('',*,*,#18890,.T.); +#18890 = EDGE_CURVE('',#18883,#18891,#18893,.T.); +#18891 = VERTEX_POINT('',#18892); +#18892 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#18893 = CIRCLE('',#18894,0.31); +#18894 = AXIS2_PLACEMENT_3D('',#18895,#18896,#18897); +#18895 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#18896 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18897 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#18898 = ORIENTED_EDGE('',*,*,#18899,.T.); +#18899 = EDGE_CURVE('',#18891,#16789,#18900,.T.); +#18900 = LINE('',#18901,#18902); +#18901 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#18902 = VECTOR('',#18903,1.); +#18903 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18904 = PLANE('',#18905); +#18905 = AXIS2_PLACEMENT_3D('',#18906,#18907,#18908); +#18906 = CARTESIAN_POINT('',(2.476022294864,-1.7,0.454762084394)); +#18907 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18908 = DIRECTION('',(0.,0.,1.)); +#18909 = ADVANCED_FACE('',(#18910),#18929,.F.); +#18910 = FACE_BOUND('',#18911,.F.); +#18911 = EDGE_LOOP('',(#18912,#18913,#18922,#18928)); +#18912 = ORIENTED_EDGE('',*,*,#16827,.T.); +#18913 = ORIENTED_EDGE('',*,*,#18914,.T.); +#18914 = EDGE_CURVE('',#16820,#18915,#18917,.T.); +#18915 = VERTEX_POINT('',#18916); +#18916 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.612364817767)); +#18917 = CIRCLE('',#18918,0.1); +#18918 = AXIS2_PLACEMENT_3D('',#18919,#18920,#18921); +#18919 = CARTESIAN_POINT('',(2.25,-2.11,0.595)); +#18920 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#18921 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18922 = ORIENTED_EDGE('',*,*,#18923,.F.); +#18923 = EDGE_CURVE('',#18824,#18915,#18924,.T.); +#18924 = LINE('',#18925,#18926); +#18925 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#18926 = VECTOR('',#18927,1.); +#18927 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#18928 = ORIENTED_EDGE('',*,*,#18823,.F.); +#18929 = CYLINDRICAL_SURFACE('',#18930,0.1); +#18930 = AXIS2_PLACEMENT_3D('',#18931,#18932,#18933); +#18931 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#18932 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#18933 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#18934 = ADVANCED_FACE('',(#18935),#19013,.T.); +#18935 = FACE_BOUND('',#18936,.T.); +#18936 = EDGE_LOOP('',(#18937,#18938,#18939,#18940,#18948,#18957,#18965, + #18973,#18981,#18990,#18998,#19007)); +#18937 = ORIENTED_EDGE('',*,*,#16841,.F.); +#18938 = ORIENTED_EDGE('',*,*,#16819,.T.); +#18939 = ORIENTED_EDGE('',*,*,#18914,.T.); +#18940 = ORIENTED_EDGE('',*,*,#18941,.T.); +#18941 = EDGE_CURVE('',#18915,#18942,#18944,.T.); +#18942 = VERTEX_POINT('',#18943); +#18943 = CARTESIAN_POINT('',(2.404962786068,-2.11,0.256169064923)); +#18944 = LINE('',#18945,#18946); +#18945 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.612364817767)); +#18946 = VECTOR('',#18947,1.); +#18947 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#18948 = ORIENTED_EDGE('',*,*,#18949,.T.); +#18949 = EDGE_CURVE('',#18942,#18950,#18952,.T.); +#18950 = VERTEX_POINT('',#18951); +#18951 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.)); +#18952 = CIRCLE('',#18953,0.31); +#18953 = AXIS2_PLACEMENT_3D('',#18954,#18955,#18956); +#18954 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.31)); +#18955 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#18956 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#18957 = ORIENTED_EDGE('',*,*,#18958,.T.); +#18958 = EDGE_CURVE('',#18950,#18959,#18961,.T.); +#18959 = VERTEX_POINT('',#18960); +#18960 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#18961 = LINE('',#18962,#18963); +#18962 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.)); +#18963 = VECTOR('',#18964,1.); +#18964 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#18965 = ORIENTED_EDGE('',*,*,#18966,.T.); +#18966 = EDGE_CURVE('',#18959,#18967,#18969,.T.); +#18967 = VERTEX_POINT('',#18968); +#18968 = CARTESIAN_POINT('',(3.,-2.11,0.21)); +#18969 = LINE('',#18970,#18971); +#18970 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#18971 = VECTOR('',#18972,1.); +#18972 = DIRECTION('',(0.,0.,1.)); +#18973 = ORIENTED_EDGE('',*,*,#18974,.T.); +#18974 = EDGE_CURVE('',#18967,#18975,#18977,.T.); +#18975 = VERTEX_POINT('',#18976); +#18976 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.21)); +#18977 = LINE('',#18978,#18979); +#18978 = CARTESIAN_POINT('',(3.,-2.11,0.21)); +#18979 = VECTOR('',#18980,1.); +#18980 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#18981 = ORIENTED_EDGE('',*,*,#18982,.T.); +#18982 = EDGE_CURVE('',#18975,#18983,#18985,.T.); +#18983 = VERTEX_POINT('',#18984); +#18984 = CARTESIAN_POINT('',(2.611772414201,-2.11,0.292635182233)); +#18985 = CIRCLE('',#18986,0.1); +#18986 = AXIS2_PLACEMENT_3D('',#18987,#18988,#18989); +#18987 = CARTESIAN_POINT('',(2.710253189502,-2.11,0.31)); +#18988 = DIRECTION('',(-1.110223024625E-16,1.,-2.189528849922E-47)); +#18989 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#18990 = ORIENTED_EDGE('',*,*,#18991,.T.); +#18991 = EDGE_CURVE('',#18983,#18992,#18994,.T.); +#18992 = VERTEX_POINT('',#18993); +#18993 = CARTESIAN_POINT('',(2.555290403434,-2.11,0.648830935077)); +#18994 = LINE('',#18995,#18996); +#18995 = CARTESIAN_POINT('',(2.611772414201,-2.11,0.292635182233)); +#18996 = VECTOR('',#18997,1.); +#18997 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#18998 = ORIENTED_EDGE('',*,*,#18999,.T.); +#18999 = EDGE_CURVE('',#18992,#19000,#19002,.T.); +#19000 = VERTEX_POINT('',#19001); +#19001 = CARTESIAN_POINT('',(2.25,-2.11,0.905)); +#19002 = CIRCLE('',#19003,0.31); +#19003 = AXIS2_PLACEMENT_3D('',#19004,#19005,#19006); +#19004 = CARTESIAN_POINT('',(2.25,-2.11,0.595)); +#19005 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#19006 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#19007 = ORIENTED_EDGE('',*,*,#19008,.T.); +#19008 = EDGE_CURVE('',#19000,#16842,#19009,.T.); +#19009 = LINE('',#19010,#19011); +#19010 = CARTESIAN_POINT('',(2.25,-2.11,0.905)); +#19011 = VECTOR('',#19012,1.); +#19012 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19013 = PLANE('',#19014); +#19014 = AXIS2_PLACEMENT_3D('',#19015,#19016,#19017); +#19015 = CARTESIAN_POINT('',(2.476022294864,-2.11,0.454762084394)); +#19016 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19017 = DIRECTION('',(0.,0.,1.)); +#19018 = ADVANCED_FACE('',(#19019),#19030,.T.); +#19019 = FACE_BOUND('',#19020,.T.); +#19020 = EDGE_LOOP('',(#19021,#19022,#19023,#19024)); +#19021 = ORIENTED_EDGE('',*,*,#18053,.T.); +#19022 = ORIENTED_EDGE('',*,*,#16954,.T.); +#19023 = ORIENTED_EDGE('',*,*,#18155,.F.); +#19024 = ORIENTED_EDGE('',*,*,#19025,.F.); +#19025 = EDGE_CURVE('',#18046,#18148,#19026,.T.); +#19026 = LINE('',#19027,#19028); +#19027 = CARTESIAN_POINT('',(-2.555290403434,1.7,0.648830935077)); +#19028 = VECTOR('',#19029,1.); +#19029 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19030 = CYLINDRICAL_SURFACE('',#19031,0.31); +#19031 = AXIS2_PLACEMENT_3D('',#19032,#19033,#19034); +#19032 = CARTESIAN_POINT('',(-2.25,1.7,0.595)); +#19033 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19034 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19035 = ADVANCED_FACE('',(#19036),#19049,.F.); +#19036 = FACE_BOUND('',#19037,.F.); +#19037 = EDGE_LOOP('',(#19038,#19039,#19045,#19046,#19047,#19048)); +#19038 = ORIENTED_EDGE('',*,*,#17398,.F.); +#19039 = ORIENTED_EDGE('',*,*,#19040,.T.); +#19040 = EDGE_CURVE('',#17390,#17499,#19041,.T.); +#19041 = LINE('',#19042,#19043); +#19042 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#19043 = VECTOR('',#19044,1.); +#19044 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19045 = ORIENTED_EDGE('',*,*,#17507,.T.); +#19046 = ORIENTED_EDGE('',*,*,#17529,.T.); +#19047 = ORIENTED_EDGE('',*,*,#17001,.F.); +#19048 = ORIENTED_EDGE('',*,*,#17272,.F.); +#19049 = PLANE('',#19050); +#19050 = AXIS2_PLACEMENT_3D('',#19051,#19052,#19053); +#19051 = CARTESIAN_POINT('',(-2.25,-2.11,0.905)); +#19052 = DIRECTION('',(0.,0.,-1.)); +#19053 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19054 = ADVANCED_FACE('',(#19055),#19068,.F.); +#19055 = FACE_BOUND('',#19056,.F.); +#19056 = EDGE_LOOP('',(#19057,#19058,#19064,#19065,#19066,#19067)); +#19057 = ORIENTED_EDGE('',*,*,#17621,.F.); +#19058 = ORIENTED_EDGE('',*,*,#19059,.T.); +#19059 = EDGE_CURVE('',#17613,#17722,#19060,.T.); +#19060 = LINE('',#19061,#19062); +#19061 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#19062 = VECTOR('',#19063,1.); +#19063 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19064 = ORIENTED_EDGE('',*,*,#17730,.T.); +#19065 = ORIENTED_EDGE('',*,*,#17752,.T.); +#19066 = ORIENTED_EDGE('',*,*,#17017,.F.); +#19067 = ORIENTED_EDGE('',*,*,#17522,.F.); +#19068 = PLANE('',#19069); +#19069 = AXIS2_PLACEMENT_3D('',#19070,#19071,#19072); +#19070 = CARTESIAN_POINT('',(-2.25,-0.84,0.905)); +#19071 = DIRECTION('',(0.,0.,-1.)); +#19072 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19073 = ADVANCED_FACE('',(#19074),#19087,.F.); +#19074 = FACE_BOUND('',#19075,.F.); +#19075 = EDGE_LOOP('',(#19076,#19077,#19083,#19084,#19085,#19086)); +#19076 = ORIENTED_EDGE('',*,*,#17844,.F.); +#19077 = ORIENTED_EDGE('',*,*,#19078,.T.); +#19078 = EDGE_CURVE('',#17836,#17945,#19079,.T.); +#19079 = LINE('',#19080,#19081); +#19080 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#19081 = VECTOR('',#19082,1.); +#19082 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19083 = ORIENTED_EDGE('',*,*,#17953,.T.); +#19084 = ORIENTED_EDGE('',*,*,#17970,.T.); +#19085 = ORIENTED_EDGE('',*,*,#17033,.F.); +#19086 = ORIENTED_EDGE('',*,*,#17745,.F.); +#19087 = PLANE('',#19088); +#19088 = AXIS2_PLACEMENT_3D('',#19089,#19090,#19091); +#19089 = CARTESIAN_POINT('',(-2.25,0.43,0.905)); +#19090 = DIRECTION('',(0.,0.,-1.)); +#19091 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19092 = ADVANCED_FACE('',(#19093,#19122),#19133,.T.); +#19093 = FACE_BOUND('',#19094,.T.); +#19094 = EDGE_LOOP('',(#19095,#19096,#19097,#19098,#19106,#19114,#19120, + #19121)); +#19095 = ORIENTED_EDGE('',*,*,#17108,.F.); +#19096 = ORIENTED_EDGE('',*,*,#17085,.F.); +#19097 = ORIENTED_EDGE('',*,*,#17056,.F.); +#19098 = ORIENTED_EDGE('',*,*,#19099,.F.); +#19099 = EDGE_CURVE('',#19100,#17057,#19102,.T.); +#19100 = VERTEX_POINT('',#19101); +#19101 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19102 = LINE('',#19103,#19104); +#19103 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19104 = VECTOR('',#19105,1.); +#19105 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19106 = ORIENTED_EDGE('',*,*,#19107,.F.); +#19107 = EDGE_CURVE('',#19108,#19100,#19110,.T.); +#19108 = VERTEX_POINT('',#19109); +#19109 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19110 = LINE('',#19111,#19112); +#19111 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19112 = VECTOR('',#19113,1.); +#19113 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19114 = ORIENTED_EDGE('',*,*,#19115,.F.); +#19115 = EDGE_CURVE('',#17212,#19108,#19116,.T.); +#19116 = LINE('',#19117,#19118); +#19117 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#19118 = VECTOR('',#19119,1.); +#19119 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19120 = ORIENTED_EDGE('',*,*,#17218,.F.); +#19121 = ORIENTED_EDGE('',*,*,#17131,.F.); +#19122 = FACE_BOUND('',#19123,.T.); +#19123 = EDGE_LOOP('',(#19124)); +#19124 = ORIENTED_EDGE('',*,*,#19125,.T.); +#19125 = EDGE_CURVE('',#19126,#19126,#19128,.T.); +#19126 = VERTEX_POINT('',#19127); +#19127 = CARTESIAN_POINT('',(-1.197342035991,1.397342035991,1.55)); +#19128 = CIRCLE('',#19129,0.3); +#19129 = AXIS2_PLACEMENT_3D('',#19130,#19131,#19132); +#19130 = CARTESIAN_POINT('',(-1.197342035991,1.697342035991,1.55)); +#19131 = DIRECTION('',(0.,-0.,-1.)); +#19132 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19133 = PLANE('',#19134); +#19134 = AXIS2_PLACEMENT_3D('',#19135,#19136,#19137); +#19135 = CARTESIAN_POINT('',(-1.649171017995,2.347342035991,1.55)); +#19136 = DIRECTION('',(0.,0.,1.)); +#19137 = DIRECTION('',(0.574872573702,-0.818242949255,0.)); +#19138 = ADVANCED_FACE('',(#19139),#19149,.F.); +#19139 = FACE_BOUND('',#19140,.F.); +#19140 = EDGE_LOOP('',(#19141,#19142,#19143,#19144)); +#19141 = ORIENTED_EDGE('',*,*,#17279,.T.); +#19142 = ORIENTED_EDGE('',*,*,#17064,.T.); +#19143 = ORIENTED_EDGE('',*,*,#19099,.F.); +#19144 = ORIENTED_EDGE('',*,*,#19145,.F.); +#19145 = EDGE_CURVE('',#17280,#19100,#19146,.T.); +#19146 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#19147,#19148),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#19147 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#19148 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19149 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#19150,#19151) + ,(#19152,#19153 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#19150 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#19151 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19152 = CARTESIAN_POINT('',(-1.9495,-2.20025,0.905)); +#19153 = CARTESIAN_POINT('',(-1.847342035991,-2.149171017995,1.55)); +#19154 = ADVANCED_FACE('',(#19155),#19168,.F.); +#19155 = FACE_BOUND('',#19156,.F.); +#19156 = EDGE_LOOP('',(#19157,#19158,#19164,#19165,#19166,#19167)); +#19157 = ORIENTED_EDGE('',*,*,#18453,.F.); +#19158 = ORIENTED_EDGE('',*,*,#19159,.T.); +#19159 = EDGE_CURVE('',#18445,#18554,#19160,.T.); +#19160 = LINE('',#19161,#19162); +#19161 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#19162 = VECTOR('',#19163,1.); +#19163 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19164 = ORIENTED_EDGE('',*,*,#18562,.T.); +#19165 = ORIENTED_EDGE('',*,*,#18576,.T.); +#19166 = ORIENTED_EDGE('',*,*,#17163,.F.); +#19167 = ORIENTED_EDGE('',*,*,#18360,.F.); +#19168 = PLANE('',#19169); +#19169 = AXIS2_PLACEMENT_3D('',#19170,#19171,#19172); +#19170 = CARTESIAN_POINT('',(2.25,0.84,0.905)); +#19171 = DIRECTION('',(0.,0.,-1.)); +#19172 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19173 = ADVANCED_FACE('',(#19174),#19187,.F.); +#19174 = FACE_BOUND('',#19175,.F.); +#19175 = EDGE_LOOP('',(#19176,#19177,#19183,#19184,#19185,#19186)); +#19176 = ORIENTED_EDGE('',*,*,#18676,.F.); +#19177 = ORIENTED_EDGE('',*,*,#19178,.T.); +#19178 = EDGE_CURVE('',#18668,#18777,#19179,.T.); +#19179 = LINE('',#19180,#19181); +#19180 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#19181 = VECTOR('',#19182,1.); +#19182 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19183 = ORIENTED_EDGE('',*,*,#18785,.T.); +#19184 = ORIENTED_EDGE('',*,*,#18799,.T.); +#19185 = ORIENTED_EDGE('',*,*,#17179,.F.); +#19186 = ORIENTED_EDGE('',*,*,#18583,.F.); +#19187 = PLANE('',#19188); +#19188 = AXIS2_PLACEMENT_3D('',#19189,#19190,#19191); +#19189 = CARTESIAN_POINT('',(2.25,-0.43,0.905)); +#19190 = DIRECTION('',(0.,0.,-1.)); +#19191 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19192 = ADVANCED_FACE('',(#19193),#19206,.F.); +#19193 = FACE_BOUND('',#19194,.F.); +#19194 = EDGE_LOOP('',(#19195,#19196,#19202,#19203,#19204,#19205)); +#19195 = ORIENTED_EDGE('',*,*,#18899,.F.); +#19196 = ORIENTED_EDGE('',*,*,#19197,.T.); +#19197 = EDGE_CURVE('',#18891,#19000,#19198,.T.); +#19198 = LINE('',#19199,#19200); +#19199 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#19200 = VECTOR('',#19201,1.); +#19201 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19202 = ORIENTED_EDGE('',*,*,#19008,.T.); +#19203 = ORIENTED_EDGE('',*,*,#17302,.T.); +#19204 = ORIENTED_EDGE('',*,*,#17195,.F.); +#19205 = ORIENTED_EDGE('',*,*,#18806,.F.); +#19206 = PLANE('',#19207); +#19207 = AXIS2_PLACEMENT_3D('',#19208,#19209,#19210); +#19208 = CARTESIAN_POINT('',(2.25,-1.7,0.905)); +#19209 = DIRECTION('',(0.,0.,-1.)); +#19210 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19211 = ADVANCED_FACE('',(#19212),#19222,.F.); +#19212 = FACE_BOUND('',#19213,.F.); +#19213 = EDGE_LOOP('',(#19214,#19215,#19220,#19221)); +#19214 = ORIENTED_EDGE('',*,*,#17295,.T.); +#19215 = ORIENTED_EDGE('',*,*,#19216,.T.); +#19216 = EDGE_CURVE('',#17288,#19108,#19217,.T.); +#19217 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#19218,#19219),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#19218 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#19219 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19220 = ORIENTED_EDGE('',*,*,#19115,.F.); +#19221 = ORIENTED_EDGE('',*,*,#17211,.F.); +#19222 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#19223,#19224) + ,(#19225,#19226 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.352492730421),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#19223 = CARTESIAN_POINT('',(1.9495,-2.20025,0.905)); +#19224 = CARTESIAN_POINT('',(1.847342035991,-2.149171017995,1.55)); +#19225 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#19226 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19227 = ADVANCED_FACE('',(#19228),#19239,.T.); +#19228 = FACE_BOUND('',#19229,.T.); +#19229 = EDGE_LOOP('',(#19230,#19231,#19232,#19233)); +#19230 = ORIENTED_EDGE('',*,*,#18240,.T.); +#19231 = ORIENTED_EDGE('',*,*,#17241,.T.); +#19232 = ORIENTED_EDGE('',*,*,#18342,.F.); +#19233 = ORIENTED_EDGE('',*,*,#19234,.F.); +#19234 = EDGE_CURVE('',#18233,#18335,#19235,.T.); +#19235 = LINE('',#19236,#19237); +#19236 = CARTESIAN_POINT('',(2.555290403434,2.11,0.648830935077)); +#19237 = VECTOR('',#19238,1.); +#19238 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19239 = CYLINDRICAL_SURFACE('',#19240,0.31); +#19240 = AXIS2_PLACEMENT_3D('',#19241,#19242,#19243); +#19241 = CARTESIAN_POINT('',(2.25,2.11,0.595)); +#19242 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19243 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#19244 = ADVANCED_FACE('',(#19245),#19251,.F.); +#19245 = FACE_BOUND('',#19246,.F.); +#19246 = EDGE_LOOP('',(#19247,#19248,#19249,#19250)); +#19247 = ORIENTED_EDGE('',*,*,#17287,.T.); +#19248 = ORIENTED_EDGE('',*,*,#19145,.T.); +#19249 = ORIENTED_EDGE('',*,*,#19107,.F.); +#19250 = ORIENTED_EDGE('',*,*,#19216,.F.); +#19251 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#19252,#19253) + ,(#19254,#19255 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.4005),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#19252 = CARTESIAN_POINT('',(1.70025,-2.4495,0.905)); +#19253 = CARTESIAN_POINT('',(1.649171017995,-2.347342035991,1.55)); +#19254 = CARTESIAN_POINT('',(-1.70025,-2.4495,0.905)); +#19255 = CARTESIAN_POINT('',(-1.649171017995,-2.347342035991,1.55)); +#19256 = ADVANCED_FACE('',(#19257),#19268,.T.); +#19257 = FACE_BOUND('',#19258,.T.); +#19258 = EDGE_LOOP('',(#19259,#19260,#19261,#19262)); +#19259 = ORIENTED_EDGE('',*,*,#17389,.T.); +#19260 = ORIENTED_EDGE('',*,*,#19040,.T.); +#19261 = ORIENTED_EDGE('',*,*,#17498,.F.); +#19262 = ORIENTED_EDGE('',*,*,#19263,.F.); +#19263 = EDGE_CURVE('',#17382,#17491,#19264,.T.); +#19264 = LINE('',#19265,#19266); +#19265 = CARTESIAN_POINT('',(-2.555290403434,-2.11,0.648830935077)); +#19266 = VECTOR('',#19267,1.); +#19267 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19268 = CYLINDRICAL_SURFACE('',#19269,0.31); +#19269 = AXIS2_PLACEMENT_3D('',#19270,#19271,#19272); +#19270 = CARTESIAN_POINT('',(-2.25,-2.11,0.595)); +#19271 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19272 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19273 = ADVANCED_FACE('',(#19274),#19285,.F.); +#19274 = FACE_BOUND('',#19275,.F.); +#19275 = EDGE_LOOP('',(#19276,#19282,#19283,#19284)); +#19276 = ORIENTED_EDGE('',*,*,#19277,.T.); +#19277 = EDGE_CURVE('',#17373,#17482,#19278,.T.); +#19278 = LINE('',#19279,#19280); +#19279 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#19280 = VECTOR('',#19281,1.); +#19281 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19282 = ORIENTED_EDGE('',*,*,#17490,.T.); +#19283 = ORIENTED_EDGE('',*,*,#19263,.F.); +#19284 = ORIENTED_EDGE('',*,*,#17381,.F.); +#19285 = PLANE('',#19286); +#19286 = AXIS2_PLACEMENT_3D('',#19287,#19288,#19289); +#19287 = CARTESIAN_POINT('',(-2.611772414201,-2.11,0.292635182233)); +#19288 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19289 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19290 = ADVANCED_FACE('',(#19291),#19302,.F.); +#19291 = FACE_BOUND('',#19292,.F.); +#19292 = EDGE_LOOP('',(#19293,#19299,#19300,#19301)); +#19293 = ORIENTED_EDGE('',*,*,#19294,.T.); +#19294 = EDGE_CURVE('',#17365,#17474,#19295,.T.); +#19295 = LINE('',#19296,#19297); +#19296 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.21)); +#19297 = VECTOR('',#19298,1.); +#19298 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19299 = ORIENTED_EDGE('',*,*,#17481,.T.); +#19300 = ORIENTED_EDGE('',*,*,#19277,.F.); +#19301 = ORIENTED_EDGE('',*,*,#17372,.F.); +#19302 = CYLINDRICAL_SURFACE('',#19303,0.1); +#19303 = AXIS2_PLACEMENT_3D('',#19304,#19305,#19306); +#19304 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#19305 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19306 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19307 = ADVANCED_FACE('',(#19308),#19319,.F.); +#19308 = FACE_BOUND('',#19309,.F.); +#19309 = EDGE_LOOP('',(#19310,#19316,#19317,#19318)); +#19310 = ORIENTED_EDGE('',*,*,#19311,.T.); +#19311 = EDGE_CURVE('',#17357,#17466,#19312,.T.); +#19312 = LINE('',#19313,#19314); +#19313 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#19314 = VECTOR('',#19315,1.); +#19315 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19316 = ORIENTED_EDGE('',*,*,#17473,.T.); +#19317 = ORIENTED_EDGE('',*,*,#19294,.F.); +#19318 = ORIENTED_EDGE('',*,*,#17364,.F.); +#19319 = PLANE('',#19320); +#19320 = AXIS2_PLACEMENT_3D('',#19321,#19322,#19323); +#19321 = CARTESIAN_POINT('',(-3.,-2.11,0.21)); +#19322 = DIRECTION('',(0.,0.,-1.)); +#19323 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19324 = ADVANCED_FACE('',(#19325),#19336,.F.); +#19325 = FACE_BOUND('',#19326,.F.); +#19326 = EDGE_LOOP('',(#19327,#19333,#19334,#19335)); +#19327 = ORIENTED_EDGE('',*,*,#19328,.T.); +#19328 = EDGE_CURVE('',#17349,#17458,#19329,.T.); +#19329 = LINE('',#19330,#19331); +#19330 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#19331 = VECTOR('',#19332,1.); +#19332 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19333 = ORIENTED_EDGE('',*,*,#17465,.T.); +#19334 = ORIENTED_EDGE('',*,*,#19311,.F.); +#19335 = ORIENTED_EDGE('',*,*,#17356,.F.); +#19336 = PLANE('',#19337); +#19337 = AXIS2_PLACEMENT_3D('',#19338,#19339,#19340); +#19338 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#19339 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19340 = DIRECTION('',(0.,0.,1.)); +#19341 = ADVANCED_FACE('',(#19342),#19353,.F.); +#19342 = FACE_BOUND('',#19343,.F.); +#19343 = EDGE_LOOP('',(#19344,#19350,#19351,#19352)); +#19344 = ORIENTED_EDGE('',*,*,#19345,.T.); +#19345 = EDGE_CURVE('',#17340,#17449,#19346,.T.); +#19346 = LINE('',#19347,#19348); +#19347 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#19348 = VECTOR('',#19349,1.); +#19349 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19350 = ORIENTED_EDGE('',*,*,#17457,.T.); +#19351 = ORIENTED_EDGE('',*,*,#19328,.F.); +#19352 = ORIENTED_EDGE('',*,*,#17348,.F.); +#19353 = PLANE('',#19354); +#19354 = AXIS2_PLACEMENT_3D('',#19355,#19356,#19357); +#19355 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.)); +#19356 = DIRECTION('',(0.,0.,1.)); +#19357 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19358 = ADVANCED_FACE('',(#19359),#19370,.T.); +#19359 = FACE_BOUND('',#19360,.T.); +#19360 = EDGE_LOOP('',(#19361,#19362,#19363,#19364)); +#19361 = ORIENTED_EDGE('',*,*,#17339,.T.); +#19362 = ORIENTED_EDGE('',*,*,#19345,.T.); +#19363 = ORIENTED_EDGE('',*,*,#17448,.F.); +#19364 = ORIENTED_EDGE('',*,*,#19365,.F.); +#19365 = EDGE_CURVE('',#17332,#17441,#19366,.T.); +#19366 = LINE('',#19367,#19368); +#19367 = CARTESIAN_POINT('',(-2.404962786068,-2.11,0.256169064923)); +#19368 = VECTOR('',#19369,1.); +#19369 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19370 = CYLINDRICAL_SURFACE('',#19371,0.31); +#19371 = AXIS2_PLACEMENT_3D('',#19372,#19373,#19374); +#19372 = CARTESIAN_POINT('',(-2.710253189502,-2.11,0.31)); +#19373 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19374 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19375 = ADVANCED_FACE('',(#19376),#19382,.F.); +#19376 = FACE_BOUND('',#19377,.F.); +#19377 = EDGE_LOOP('',(#19378,#19379,#19380,#19381)); +#19378 = ORIENTED_EDGE('',*,*,#17422,.T.); +#19379 = ORIENTED_EDGE('',*,*,#17440,.T.); +#19380 = ORIENTED_EDGE('',*,*,#19365,.F.); +#19381 = ORIENTED_EDGE('',*,*,#17331,.F.); +#19382 = PLANE('',#19383); +#19383 = AXIS2_PLACEMENT_3D('',#19384,#19385,#19386); +#19384 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.612364817767)); +#19385 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19386 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19387 = ADVANCED_FACE('',(#19388),#19399,.T.); +#19388 = FACE_BOUND('',#19389,.T.); +#19389 = EDGE_LOOP('',(#19390,#19391,#19392,#19393)); +#19390 = ORIENTED_EDGE('',*,*,#17612,.T.); +#19391 = ORIENTED_EDGE('',*,*,#19059,.T.); +#19392 = ORIENTED_EDGE('',*,*,#17721,.F.); +#19393 = ORIENTED_EDGE('',*,*,#19394,.F.); +#19394 = EDGE_CURVE('',#17605,#17714,#19395,.T.); +#19395 = LINE('',#19396,#19397); +#19396 = CARTESIAN_POINT('',(-2.555290403434,-0.84,0.648830935077)); +#19397 = VECTOR('',#19398,1.); +#19398 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19399 = CYLINDRICAL_SURFACE('',#19400,0.31); +#19400 = AXIS2_PLACEMENT_3D('',#19401,#19402,#19403); +#19401 = CARTESIAN_POINT('',(-2.25,-0.84,0.595)); +#19402 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19403 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19404 = ADVANCED_FACE('',(#19405),#19416,.F.); +#19405 = FACE_BOUND('',#19406,.F.); +#19406 = EDGE_LOOP('',(#19407,#19413,#19414,#19415)); +#19407 = ORIENTED_EDGE('',*,*,#19408,.T.); +#19408 = EDGE_CURVE('',#17596,#17705,#19409,.T.); +#19409 = LINE('',#19410,#19411); +#19410 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#19411 = VECTOR('',#19412,1.); +#19412 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19413 = ORIENTED_EDGE('',*,*,#17713,.T.); +#19414 = ORIENTED_EDGE('',*,*,#19394,.F.); +#19415 = ORIENTED_EDGE('',*,*,#17604,.F.); +#19416 = PLANE('',#19417); +#19417 = AXIS2_PLACEMENT_3D('',#19418,#19419,#19420); +#19418 = CARTESIAN_POINT('',(-2.611772414201,-0.84,0.292635182233)); +#19419 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19420 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19421 = ADVANCED_FACE('',(#19422),#19433,.F.); +#19422 = FACE_BOUND('',#19423,.F.); +#19423 = EDGE_LOOP('',(#19424,#19430,#19431,#19432)); +#19424 = ORIENTED_EDGE('',*,*,#19425,.T.); +#19425 = EDGE_CURVE('',#17588,#17697,#19426,.T.); +#19426 = LINE('',#19427,#19428); +#19427 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.21)); +#19428 = VECTOR('',#19429,1.); +#19429 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19430 = ORIENTED_EDGE('',*,*,#17704,.T.); +#19431 = ORIENTED_EDGE('',*,*,#19408,.F.); +#19432 = ORIENTED_EDGE('',*,*,#17595,.F.); +#19433 = CYLINDRICAL_SURFACE('',#19434,0.1); +#19434 = AXIS2_PLACEMENT_3D('',#19435,#19436,#19437); +#19435 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#19436 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19437 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19438 = ADVANCED_FACE('',(#19439),#19450,.F.); +#19439 = FACE_BOUND('',#19440,.F.); +#19440 = EDGE_LOOP('',(#19441,#19447,#19448,#19449)); +#19441 = ORIENTED_EDGE('',*,*,#19442,.T.); +#19442 = EDGE_CURVE('',#17580,#17689,#19443,.T.); +#19443 = LINE('',#19444,#19445); +#19444 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#19445 = VECTOR('',#19446,1.); +#19446 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19447 = ORIENTED_EDGE('',*,*,#17696,.T.); +#19448 = ORIENTED_EDGE('',*,*,#19425,.F.); +#19449 = ORIENTED_EDGE('',*,*,#17587,.F.); +#19450 = PLANE('',#19451); +#19451 = AXIS2_PLACEMENT_3D('',#19452,#19453,#19454); +#19452 = CARTESIAN_POINT('',(-3.,-0.84,0.21)); +#19453 = DIRECTION('',(0.,0.,-1.)); +#19454 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19455 = ADVANCED_FACE('',(#19456),#19467,.F.); +#19456 = FACE_BOUND('',#19457,.F.); +#19457 = EDGE_LOOP('',(#19458,#19464,#19465,#19466)); +#19458 = ORIENTED_EDGE('',*,*,#19459,.T.); +#19459 = EDGE_CURVE('',#17572,#17681,#19460,.T.); +#19460 = LINE('',#19461,#19462); +#19461 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#19462 = VECTOR('',#19463,1.); +#19463 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19464 = ORIENTED_EDGE('',*,*,#17688,.T.); +#19465 = ORIENTED_EDGE('',*,*,#19442,.F.); +#19466 = ORIENTED_EDGE('',*,*,#17579,.F.); +#19467 = PLANE('',#19468); +#19468 = AXIS2_PLACEMENT_3D('',#19469,#19470,#19471); +#19469 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#19470 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19471 = DIRECTION('',(0.,0.,1.)); +#19472 = ADVANCED_FACE('',(#19473),#19484,.F.); +#19473 = FACE_BOUND('',#19474,.F.); +#19474 = EDGE_LOOP('',(#19475,#19481,#19482,#19483)); +#19475 = ORIENTED_EDGE('',*,*,#19476,.T.); +#19476 = EDGE_CURVE('',#17563,#17672,#19477,.T.); +#19477 = LINE('',#19478,#19479); +#19478 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#19479 = VECTOR('',#19480,1.); +#19480 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19481 = ORIENTED_EDGE('',*,*,#17680,.T.); +#19482 = ORIENTED_EDGE('',*,*,#19459,.F.); +#19483 = ORIENTED_EDGE('',*,*,#17571,.F.); +#19484 = PLANE('',#19485); +#19485 = AXIS2_PLACEMENT_3D('',#19486,#19487,#19488); +#19486 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.)); +#19487 = DIRECTION('',(0.,0.,1.)); +#19488 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19489 = ADVANCED_FACE('',(#19490),#19501,.T.); +#19490 = FACE_BOUND('',#19491,.T.); +#19491 = EDGE_LOOP('',(#19492,#19493,#19494,#19495)); +#19492 = ORIENTED_EDGE('',*,*,#17562,.T.); +#19493 = ORIENTED_EDGE('',*,*,#19476,.T.); +#19494 = ORIENTED_EDGE('',*,*,#17671,.F.); +#19495 = ORIENTED_EDGE('',*,*,#19496,.F.); +#19496 = EDGE_CURVE('',#17555,#17664,#19497,.T.); +#19497 = LINE('',#19498,#19499); +#19498 = CARTESIAN_POINT('',(-2.404962786068,-0.84,0.256169064923)); +#19499 = VECTOR('',#19500,1.); +#19500 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19501 = CYLINDRICAL_SURFACE('',#19502,0.31); +#19502 = AXIS2_PLACEMENT_3D('',#19503,#19504,#19505); +#19503 = CARTESIAN_POINT('',(-2.710253189502,-0.84,0.31)); +#19504 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19505 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19506 = ADVANCED_FACE('',(#19507),#19513,.F.); +#19507 = FACE_BOUND('',#19508,.F.); +#19508 = EDGE_LOOP('',(#19509,#19510,#19511,#19512)); +#19509 = ORIENTED_EDGE('',*,*,#17645,.T.); +#19510 = ORIENTED_EDGE('',*,*,#17663,.T.); +#19511 = ORIENTED_EDGE('',*,*,#19496,.F.); +#19512 = ORIENTED_EDGE('',*,*,#17554,.F.); +#19513 = PLANE('',#19514); +#19514 = AXIS2_PLACEMENT_3D('',#19515,#19516,#19517); +#19515 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.612364817767)); +#19516 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19517 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19518 = ADVANCED_FACE('',(#19519),#19530,.T.); +#19519 = FACE_BOUND('',#19520,.T.); +#19520 = EDGE_LOOP('',(#19521,#19522,#19523,#19524)); +#19521 = ORIENTED_EDGE('',*,*,#17835,.T.); +#19522 = ORIENTED_EDGE('',*,*,#19078,.T.); +#19523 = ORIENTED_EDGE('',*,*,#17944,.F.); +#19524 = ORIENTED_EDGE('',*,*,#19525,.F.); +#19525 = EDGE_CURVE('',#17828,#17937,#19526,.T.); +#19526 = LINE('',#19527,#19528); +#19527 = CARTESIAN_POINT('',(-2.555290403434,0.43,0.648830935077)); +#19528 = VECTOR('',#19529,1.); +#19529 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19530 = CYLINDRICAL_SURFACE('',#19531,0.31); +#19531 = AXIS2_PLACEMENT_3D('',#19532,#19533,#19534); +#19532 = CARTESIAN_POINT('',(-2.25,0.43,0.595)); +#19533 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19534 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#19535 = ADVANCED_FACE('',(#19536),#19547,.F.); +#19536 = FACE_BOUND('',#19537,.F.); +#19537 = EDGE_LOOP('',(#19538,#19544,#19545,#19546)); +#19538 = ORIENTED_EDGE('',*,*,#19539,.T.); +#19539 = EDGE_CURVE('',#17819,#17928,#19540,.T.); +#19540 = LINE('',#19541,#19542); +#19541 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#19542 = VECTOR('',#19543,1.); +#19543 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19544 = ORIENTED_EDGE('',*,*,#17936,.T.); +#19545 = ORIENTED_EDGE('',*,*,#19525,.F.); +#19546 = ORIENTED_EDGE('',*,*,#17827,.F.); +#19547 = PLANE('',#19548); +#19548 = AXIS2_PLACEMENT_3D('',#19549,#19550,#19551); +#19549 = CARTESIAN_POINT('',(-2.611772414201,0.43,0.292635182233)); +#19550 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19551 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19552 = ADVANCED_FACE('',(#19553),#19564,.F.); +#19553 = FACE_BOUND('',#19554,.F.); +#19554 = EDGE_LOOP('',(#19555,#19561,#19562,#19563)); +#19555 = ORIENTED_EDGE('',*,*,#19556,.T.); +#19556 = EDGE_CURVE('',#17811,#17920,#19557,.T.); +#19557 = LINE('',#19558,#19559); +#19558 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.21)); +#19559 = VECTOR('',#19560,1.); +#19560 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19561 = ORIENTED_EDGE('',*,*,#17927,.T.); +#19562 = ORIENTED_EDGE('',*,*,#19539,.F.); +#19563 = ORIENTED_EDGE('',*,*,#17818,.F.); +#19564 = CYLINDRICAL_SURFACE('',#19565,0.1); +#19565 = AXIS2_PLACEMENT_3D('',#19566,#19567,#19568); +#19566 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#19567 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19568 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19569 = ADVANCED_FACE('',(#19570),#19581,.F.); +#19570 = FACE_BOUND('',#19571,.F.); +#19571 = EDGE_LOOP('',(#19572,#19578,#19579,#19580)); +#19572 = ORIENTED_EDGE('',*,*,#19573,.T.); +#19573 = EDGE_CURVE('',#17803,#17912,#19574,.T.); +#19574 = LINE('',#19575,#19576); +#19575 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#19576 = VECTOR('',#19577,1.); +#19577 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19578 = ORIENTED_EDGE('',*,*,#17919,.T.); +#19579 = ORIENTED_EDGE('',*,*,#19556,.F.); +#19580 = ORIENTED_EDGE('',*,*,#17810,.F.); +#19581 = PLANE('',#19582); +#19582 = AXIS2_PLACEMENT_3D('',#19583,#19584,#19585); +#19583 = CARTESIAN_POINT('',(-3.,0.43,0.21)); +#19584 = DIRECTION('',(0.,0.,-1.)); +#19585 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19586 = ADVANCED_FACE('',(#19587),#19598,.F.); +#19587 = FACE_BOUND('',#19588,.F.); +#19588 = EDGE_LOOP('',(#19589,#19595,#19596,#19597)); +#19589 = ORIENTED_EDGE('',*,*,#19590,.T.); +#19590 = EDGE_CURVE('',#17795,#17904,#19591,.T.); +#19591 = LINE('',#19592,#19593); +#19592 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#19593 = VECTOR('',#19594,1.); +#19594 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19595 = ORIENTED_EDGE('',*,*,#17911,.T.); +#19596 = ORIENTED_EDGE('',*,*,#19573,.F.); +#19597 = ORIENTED_EDGE('',*,*,#17802,.F.); +#19598 = PLANE('',#19599); +#19599 = AXIS2_PLACEMENT_3D('',#19600,#19601,#19602); +#19600 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#19601 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19602 = DIRECTION('',(0.,0.,1.)); +#19603 = ADVANCED_FACE('',(#19604),#19615,.F.); +#19604 = FACE_BOUND('',#19605,.F.); +#19605 = EDGE_LOOP('',(#19606,#19612,#19613,#19614)); +#19606 = ORIENTED_EDGE('',*,*,#19607,.T.); +#19607 = EDGE_CURVE('',#17786,#17895,#19608,.T.); +#19608 = LINE('',#19609,#19610); +#19609 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#19610 = VECTOR('',#19611,1.); +#19611 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19612 = ORIENTED_EDGE('',*,*,#17903,.T.); +#19613 = ORIENTED_EDGE('',*,*,#19590,.F.); +#19614 = ORIENTED_EDGE('',*,*,#17794,.F.); +#19615 = PLANE('',#19616); +#19616 = AXIS2_PLACEMENT_3D('',#19617,#19618,#19619); +#19617 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.)); +#19618 = DIRECTION('',(0.,0.,1.)); +#19619 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19620 = ADVANCED_FACE('',(#19621),#19632,.T.); +#19621 = FACE_BOUND('',#19622,.T.); +#19622 = EDGE_LOOP('',(#19623,#19624,#19625,#19626)); +#19623 = ORIENTED_EDGE('',*,*,#17785,.T.); +#19624 = ORIENTED_EDGE('',*,*,#19607,.T.); +#19625 = ORIENTED_EDGE('',*,*,#17894,.F.); +#19626 = ORIENTED_EDGE('',*,*,#19627,.F.); +#19627 = EDGE_CURVE('',#17778,#17887,#19628,.T.); +#19628 = LINE('',#19629,#19630); +#19629 = CARTESIAN_POINT('',(-2.404962786068,0.43,0.256169064923)); +#19630 = VECTOR('',#19631,1.); +#19631 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19632 = CYLINDRICAL_SURFACE('',#19633,0.31); +#19633 = AXIS2_PLACEMENT_3D('',#19634,#19635,#19636); +#19634 = CARTESIAN_POINT('',(-2.710253189502,0.43,0.31)); +#19635 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19636 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19637 = ADVANCED_FACE('',(#19638),#19644,.F.); +#19638 = FACE_BOUND('',#19639,.F.); +#19639 = EDGE_LOOP('',(#19640,#19641,#19642,#19643)); +#19640 = ORIENTED_EDGE('',*,*,#17868,.T.); +#19641 = ORIENTED_EDGE('',*,*,#17886,.T.); +#19642 = ORIENTED_EDGE('',*,*,#19627,.F.); +#19643 = ORIENTED_EDGE('',*,*,#17777,.F.); +#19644 = PLANE('',#19645); +#19645 = AXIS2_PLACEMENT_3D('',#19646,#19647,#19648); +#19646 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.612364817767)); +#19647 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19648 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19649 = ADVANCED_FACE('',(#19650),#19661,.F.); +#19650 = FACE_BOUND('',#19651,.F.); +#19651 = EDGE_LOOP('',(#19652,#19658,#19659,#19660)); +#19652 = ORIENTED_EDGE('',*,*,#19653,.T.); +#19653 = EDGE_CURVE('',#18037,#18139,#19654,.T.); +#19654 = LINE('',#19655,#19656); +#19655 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#19656 = VECTOR('',#19657,1.); +#19657 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19658 = ORIENTED_EDGE('',*,*,#18147,.T.); +#19659 = ORIENTED_EDGE('',*,*,#19025,.F.); +#19660 = ORIENTED_EDGE('',*,*,#18045,.F.); +#19661 = PLANE('',#19662); +#19662 = AXIS2_PLACEMENT_3D('',#19663,#19664,#19665); +#19663 = CARTESIAN_POINT('',(-2.611772414201,1.7,0.292635182233)); +#19664 = DIRECTION('',(0.987659986114,-1.130117835557E-17,-0.1566133833) + ); +#19665 = DIRECTION('',(0.1566133833,-1.792029445784E-18,0.987659986114) + ); +#19666 = ADVANCED_FACE('',(#19667),#19678,.F.); +#19667 = FACE_BOUND('',#19668,.F.); +#19668 = EDGE_LOOP('',(#19669,#19675,#19676,#19677)); +#19669 = ORIENTED_EDGE('',*,*,#19670,.T.); +#19670 = EDGE_CURVE('',#18029,#18131,#19671,.T.); +#19671 = LINE('',#19672,#19673); +#19672 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.21)); +#19673 = VECTOR('',#19674,1.); +#19674 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19675 = ORIENTED_EDGE('',*,*,#18138,.T.); +#19676 = ORIENTED_EDGE('',*,*,#19653,.F.); +#19677 = ORIENTED_EDGE('',*,*,#18036,.F.); +#19678 = CYLINDRICAL_SURFACE('',#19679,0.1); +#19679 = AXIS2_PLACEMENT_3D('',#19680,#19681,#19682); +#19680 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#19681 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19682 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,-1.)); +#19683 = ADVANCED_FACE('',(#19684),#19695,.F.); +#19684 = FACE_BOUND('',#19685,.F.); +#19685 = EDGE_LOOP('',(#19686,#19692,#19693,#19694)); +#19686 = ORIENTED_EDGE('',*,*,#19687,.T.); +#19687 = EDGE_CURVE('',#18021,#18123,#19688,.T.); +#19688 = LINE('',#19689,#19690); +#19689 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#19690 = VECTOR('',#19691,1.); +#19691 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19692 = ORIENTED_EDGE('',*,*,#18130,.T.); +#19693 = ORIENTED_EDGE('',*,*,#19670,.F.); +#19694 = ORIENTED_EDGE('',*,*,#18028,.F.); +#19695 = PLANE('',#19696); +#19696 = AXIS2_PLACEMENT_3D('',#19697,#19698,#19699); +#19697 = CARTESIAN_POINT('',(-3.,1.7,0.21)); +#19698 = DIRECTION('',(0.,0.,-1.)); +#19699 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19700 = ADVANCED_FACE('',(#19701),#19712,.F.); +#19701 = FACE_BOUND('',#19702,.F.); +#19702 = EDGE_LOOP('',(#19703,#19709,#19710,#19711)); +#19703 = ORIENTED_EDGE('',*,*,#19704,.T.); +#19704 = EDGE_CURVE('',#18013,#18115,#19705,.T.); +#19705 = LINE('',#19706,#19707); +#19706 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#19707 = VECTOR('',#19708,1.); +#19708 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19709 = ORIENTED_EDGE('',*,*,#18122,.T.); +#19710 = ORIENTED_EDGE('',*,*,#19687,.F.); +#19711 = ORIENTED_EDGE('',*,*,#18020,.F.); +#19712 = PLANE('',#19713); +#19713 = AXIS2_PLACEMENT_3D('',#19714,#19715,#19716); +#19714 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#19715 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#19716 = DIRECTION('',(0.,0.,1.)); +#19717 = ADVANCED_FACE('',(#19718),#19729,.F.); +#19718 = FACE_BOUND('',#19719,.F.); +#19719 = EDGE_LOOP('',(#19720,#19726,#19727,#19728)); +#19720 = ORIENTED_EDGE('',*,*,#19721,.T.); +#19721 = EDGE_CURVE('',#18004,#18106,#19722,.T.); +#19722 = LINE('',#19723,#19724); +#19723 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#19724 = VECTOR('',#19725,1.); +#19725 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19726 = ORIENTED_EDGE('',*,*,#18114,.T.); +#19727 = ORIENTED_EDGE('',*,*,#19704,.F.); +#19728 = ORIENTED_EDGE('',*,*,#18012,.F.); +#19729 = PLANE('',#19730); +#19730 = AXIS2_PLACEMENT_3D('',#19731,#19732,#19733); +#19731 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.)); +#19732 = DIRECTION('',(0.,0.,1.)); +#19733 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#19734 = ADVANCED_FACE('',(#19735),#19746,.T.); +#19735 = FACE_BOUND('',#19736,.T.); +#19736 = EDGE_LOOP('',(#19737,#19738,#19739,#19740)); +#19737 = ORIENTED_EDGE('',*,*,#18003,.T.); +#19738 = ORIENTED_EDGE('',*,*,#19721,.T.); +#19739 = ORIENTED_EDGE('',*,*,#18105,.F.); +#19740 = ORIENTED_EDGE('',*,*,#19741,.F.); +#19741 = EDGE_CURVE('',#17996,#18098,#19742,.T.); +#19742 = LINE('',#19743,#19744); +#19743 = CARTESIAN_POINT('',(-2.404962786068,1.7,0.256169064923)); +#19744 = VECTOR('',#19745,1.); +#19745 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#19746 = CYLINDRICAL_SURFACE('',#19747,0.31); +#19747 = AXIS2_PLACEMENT_3D('',#19748,#19749,#19750); +#19748 = CARTESIAN_POINT('',(-2.710253189502,1.7,0.31)); +#19749 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#19750 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#19751 = ADVANCED_FACE('',(#19752),#19758,.F.); +#19752 = FACE_BOUND('',#19753,.F.); +#19753 = EDGE_LOOP('',(#19754,#19755,#19756,#19757)); +#19754 = ORIENTED_EDGE('',*,*,#18079,.T.); +#19755 = ORIENTED_EDGE('',*,*,#18097,.T.); +#19756 = ORIENTED_EDGE('',*,*,#19741,.F.); +#19757 = ORIENTED_EDGE('',*,*,#17995,.F.); +#19758 = PLANE('',#19759); +#19759 = AXIS2_PLACEMENT_3D('',#19760,#19761,#19762); +#19760 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.612364817767)); +#19761 = DIRECTION('',(-0.987659986114,1.130117835557E-17,0.1566133833) + ); +#19762 = DIRECTION('',(-0.1566133833,1.792029445784E-18,-0.987659986114) + ); +#19763 = ADVANCED_FACE('',(#19764),#19775,.F.); +#19764 = FACE_BOUND('',#19765,.F.); +#19765 = EDGE_LOOP('',(#19766,#19772,#19773,#19774)); +#19766 = ORIENTED_EDGE('',*,*,#19767,.T.); +#19767 = EDGE_CURVE('',#18224,#18326,#19768,.T.); +#19768 = LINE('',#19769,#19770); +#19769 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#19770 = VECTOR('',#19771,1.); +#19771 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19772 = ORIENTED_EDGE('',*,*,#18334,.T.); +#19773 = ORIENTED_EDGE('',*,*,#19234,.F.); +#19774 = ORIENTED_EDGE('',*,*,#18232,.F.); +#19775 = PLANE('',#19776); +#19776 = AXIS2_PLACEMENT_3D('',#19777,#19778,#19779); +#19777 = CARTESIAN_POINT('',(2.611772414201,2.11,0.292635182233)); +#19778 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#19779 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#19780 = ADVANCED_FACE('',(#19781),#19792,.F.); +#19781 = FACE_BOUND('',#19782,.F.); +#19782 = EDGE_LOOP('',(#19783,#19789,#19790,#19791)); +#19783 = ORIENTED_EDGE('',*,*,#19784,.T.); +#19784 = EDGE_CURVE('',#18216,#18318,#19785,.T.); +#19785 = LINE('',#19786,#19787); +#19786 = CARTESIAN_POINT('',(2.710253189502,2.11,0.21)); +#19787 = VECTOR('',#19788,1.); +#19788 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19789 = ORIENTED_EDGE('',*,*,#18325,.T.); +#19790 = ORIENTED_EDGE('',*,*,#19767,.F.); +#19791 = ORIENTED_EDGE('',*,*,#18223,.F.); +#19792 = CYLINDRICAL_SURFACE('',#19793,0.1); +#19793 = AXIS2_PLACEMENT_3D('',#19794,#19795,#19796); +#19794 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#19795 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19796 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#19797 = ADVANCED_FACE('',(#19798),#19809,.F.); +#19798 = FACE_BOUND('',#19799,.F.); +#19799 = EDGE_LOOP('',(#19800,#19806,#19807,#19808)); +#19800 = ORIENTED_EDGE('',*,*,#19801,.T.); +#19801 = EDGE_CURVE('',#18208,#18310,#19802,.T.); +#19802 = LINE('',#19803,#19804); +#19803 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#19804 = VECTOR('',#19805,1.); +#19805 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19806 = ORIENTED_EDGE('',*,*,#18317,.T.); +#19807 = ORIENTED_EDGE('',*,*,#19784,.F.); +#19808 = ORIENTED_EDGE('',*,*,#18215,.F.); +#19809 = PLANE('',#19810); +#19810 = AXIS2_PLACEMENT_3D('',#19811,#19812,#19813); +#19811 = CARTESIAN_POINT('',(3.,2.11,0.21)); +#19812 = DIRECTION('',(0.,0.,-1.)); +#19813 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19814 = ADVANCED_FACE('',(#19815),#19826,.F.); +#19815 = FACE_BOUND('',#19816,.F.); +#19816 = EDGE_LOOP('',(#19817,#19823,#19824,#19825)); +#19817 = ORIENTED_EDGE('',*,*,#19818,.T.); +#19818 = EDGE_CURVE('',#18200,#18302,#19819,.T.); +#19819 = LINE('',#19820,#19821); +#19820 = CARTESIAN_POINT('',(3.,2.11,0.)); +#19821 = VECTOR('',#19822,1.); +#19822 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19823 = ORIENTED_EDGE('',*,*,#18309,.T.); +#19824 = ORIENTED_EDGE('',*,*,#19801,.F.); +#19825 = ORIENTED_EDGE('',*,*,#18207,.F.); +#19826 = PLANE('',#19827); +#19827 = AXIS2_PLACEMENT_3D('',#19828,#19829,#19830); +#19828 = CARTESIAN_POINT('',(3.,2.11,0.)); +#19829 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19830 = DIRECTION('',(0.,0.,1.)); +#19831 = ADVANCED_FACE('',(#19832),#19843,.F.); +#19832 = FACE_BOUND('',#19833,.F.); +#19833 = EDGE_LOOP('',(#19834,#19840,#19841,#19842)); +#19834 = ORIENTED_EDGE('',*,*,#19835,.T.); +#19835 = EDGE_CURVE('',#18191,#18293,#19836,.T.); +#19836 = LINE('',#19837,#19838); +#19837 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#19838 = VECTOR('',#19839,1.); +#19839 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19840 = ORIENTED_EDGE('',*,*,#18301,.T.); +#19841 = ORIENTED_EDGE('',*,*,#19818,.F.); +#19842 = ORIENTED_EDGE('',*,*,#18199,.F.); +#19843 = PLANE('',#19844); +#19844 = AXIS2_PLACEMENT_3D('',#19845,#19846,#19847); +#19845 = CARTESIAN_POINT('',(2.710253189502,2.11,0.)); +#19846 = DIRECTION('',(0.,0.,1.)); +#19847 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#19848 = ADVANCED_FACE('',(#19849),#19860,.T.); +#19849 = FACE_BOUND('',#19850,.T.); +#19850 = EDGE_LOOP('',(#19851,#19852,#19853,#19854)); +#19851 = ORIENTED_EDGE('',*,*,#18190,.T.); +#19852 = ORIENTED_EDGE('',*,*,#19835,.T.); +#19853 = ORIENTED_EDGE('',*,*,#18292,.F.); +#19854 = ORIENTED_EDGE('',*,*,#19855,.F.); +#19855 = EDGE_CURVE('',#18183,#18285,#19856,.T.); +#19856 = LINE('',#19857,#19858); +#19857 = CARTESIAN_POINT('',(2.404962786068,2.11,0.256169064923)); +#19858 = VECTOR('',#19859,1.); +#19859 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19860 = CYLINDRICAL_SURFACE('',#19861,0.31); +#19861 = AXIS2_PLACEMENT_3D('',#19862,#19863,#19864); +#19862 = CARTESIAN_POINT('',(2.710253189502,2.11,0.31)); +#19863 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19864 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#19865 = ADVANCED_FACE('',(#19866),#19872,.F.); +#19866 = FACE_BOUND('',#19867,.F.); +#19867 = EDGE_LOOP('',(#19868,#19869,#19870,#19871)); +#19868 = ORIENTED_EDGE('',*,*,#18266,.T.); +#19869 = ORIENTED_EDGE('',*,*,#18284,.T.); +#19870 = ORIENTED_EDGE('',*,*,#19855,.F.); +#19871 = ORIENTED_EDGE('',*,*,#18182,.F.); +#19872 = PLANE('',#19873); +#19873 = AXIS2_PLACEMENT_3D('',#19874,#19875,#19876); +#19874 = CARTESIAN_POINT('',(2.348480775301,2.11,0.612364817767)); +#19875 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#19876 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#19877 = ADVANCED_FACE('',(#19878),#19889,.T.); +#19878 = FACE_BOUND('',#19879,.T.); +#19879 = EDGE_LOOP('',(#19880,#19881,#19882,#19883)); +#19880 = ORIENTED_EDGE('',*,*,#18444,.T.); +#19881 = ORIENTED_EDGE('',*,*,#19159,.T.); +#19882 = ORIENTED_EDGE('',*,*,#18553,.F.); +#19883 = ORIENTED_EDGE('',*,*,#19884,.F.); +#19884 = EDGE_CURVE('',#18437,#18546,#19885,.T.); +#19885 = LINE('',#19886,#19887); +#19886 = CARTESIAN_POINT('',(2.555290403434,0.84,0.648830935077)); +#19887 = VECTOR('',#19888,1.); +#19888 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19889 = CYLINDRICAL_SURFACE('',#19890,0.31); +#19890 = AXIS2_PLACEMENT_3D('',#19891,#19892,#19893); +#19891 = CARTESIAN_POINT('',(2.25,0.84,0.595)); +#19892 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19893 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#19894 = ADVANCED_FACE('',(#19895),#19906,.F.); +#19895 = FACE_BOUND('',#19896,.F.); +#19896 = EDGE_LOOP('',(#19897,#19903,#19904,#19905)); +#19897 = ORIENTED_EDGE('',*,*,#19898,.T.); +#19898 = EDGE_CURVE('',#18428,#18537,#19899,.T.); +#19899 = LINE('',#19900,#19901); +#19900 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#19901 = VECTOR('',#19902,1.); +#19902 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19903 = ORIENTED_EDGE('',*,*,#18545,.T.); +#19904 = ORIENTED_EDGE('',*,*,#19884,.F.); +#19905 = ORIENTED_EDGE('',*,*,#18436,.F.); +#19906 = PLANE('',#19907); +#19907 = AXIS2_PLACEMENT_3D('',#19908,#19909,#19910); +#19908 = CARTESIAN_POINT('',(2.611772414201,0.84,0.292635182233)); +#19909 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#19910 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#19911 = ADVANCED_FACE('',(#19912),#19923,.F.); +#19912 = FACE_BOUND('',#19913,.F.); +#19913 = EDGE_LOOP('',(#19914,#19920,#19921,#19922)); +#19914 = ORIENTED_EDGE('',*,*,#19915,.T.); +#19915 = EDGE_CURVE('',#18420,#18529,#19916,.T.); +#19916 = LINE('',#19917,#19918); +#19917 = CARTESIAN_POINT('',(2.710253189502,0.84,0.21)); +#19918 = VECTOR('',#19919,1.); +#19919 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19920 = ORIENTED_EDGE('',*,*,#18536,.T.); +#19921 = ORIENTED_EDGE('',*,*,#19898,.F.); +#19922 = ORIENTED_EDGE('',*,*,#18427,.F.); +#19923 = CYLINDRICAL_SURFACE('',#19924,0.1); +#19924 = AXIS2_PLACEMENT_3D('',#19925,#19926,#19927); +#19925 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#19926 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19927 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#19928 = ADVANCED_FACE('',(#19929),#19940,.F.); +#19929 = FACE_BOUND('',#19930,.F.); +#19930 = EDGE_LOOP('',(#19931,#19937,#19938,#19939)); +#19931 = ORIENTED_EDGE('',*,*,#19932,.T.); +#19932 = EDGE_CURVE('',#18412,#18521,#19933,.T.); +#19933 = LINE('',#19934,#19935); +#19934 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#19935 = VECTOR('',#19936,1.); +#19936 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19937 = ORIENTED_EDGE('',*,*,#18528,.T.); +#19938 = ORIENTED_EDGE('',*,*,#19915,.F.); +#19939 = ORIENTED_EDGE('',*,*,#18419,.F.); +#19940 = PLANE('',#19941); +#19941 = AXIS2_PLACEMENT_3D('',#19942,#19943,#19944); +#19942 = CARTESIAN_POINT('',(3.,0.84,0.21)); +#19943 = DIRECTION('',(0.,0.,-1.)); +#19944 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#19945 = ADVANCED_FACE('',(#19946),#19957,.F.); +#19946 = FACE_BOUND('',#19947,.F.); +#19947 = EDGE_LOOP('',(#19948,#19954,#19955,#19956)); +#19948 = ORIENTED_EDGE('',*,*,#19949,.T.); +#19949 = EDGE_CURVE('',#18404,#18513,#19950,.T.); +#19950 = LINE('',#19951,#19952); +#19951 = CARTESIAN_POINT('',(3.,0.84,0.)); +#19952 = VECTOR('',#19953,1.); +#19953 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19954 = ORIENTED_EDGE('',*,*,#18520,.T.); +#19955 = ORIENTED_EDGE('',*,*,#19932,.F.); +#19956 = ORIENTED_EDGE('',*,*,#18411,.F.); +#19957 = PLANE('',#19958); +#19958 = AXIS2_PLACEMENT_3D('',#19959,#19960,#19961); +#19959 = CARTESIAN_POINT('',(3.,0.84,0.)); +#19960 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#19961 = DIRECTION('',(0.,0.,1.)); +#19962 = ADVANCED_FACE('',(#19963),#19974,.F.); +#19963 = FACE_BOUND('',#19964,.F.); +#19964 = EDGE_LOOP('',(#19965,#19971,#19972,#19973)); +#19965 = ORIENTED_EDGE('',*,*,#19966,.T.); +#19966 = EDGE_CURVE('',#18395,#18504,#19967,.T.); +#19967 = LINE('',#19968,#19969); +#19968 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#19969 = VECTOR('',#19970,1.); +#19970 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19971 = ORIENTED_EDGE('',*,*,#18512,.T.); +#19972 = ORIENTED_EDGE('',*,*,#19949,.F.); +#19973 = ORIENTED_EDGE('',*,*,#18403,.F.); +#19974 = PLANE('',#19975); +#19975 = AXIS2_PLACEMENT_3D('',#19976,#19977,#19978); +#19976 = CARTESIAN_POINT('',(2.710253189502,0.84,0.)); +#19977 = DIRECTION('',(0.,0.,1.)); +#19978 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#19979 = ADVANCED_FACE('',(#19980),#19991,.T.); +#19980 = FACE_BOUND('',#19981,.T.); +#19981 = EDGE_LOOP('',(#19982,#19983,#19984,#19985)); +#19982 = ORIENTED_EDGE('',*,*,#18394,.T.); +#19983 = ORIENTED_EDGE('',*,*,#19966,.T.); +#19984 = ORIENTED_EDGE('',*,*,#18503,.F.); +#19985 = ORIENTED_EDGE('',*,*,#19986,.F.); +#19986 = EDGE_CURVE('',#18387,#18496,#19987,.T.); +#19987 = LINE('',#19988,#19989); +#19988 = CARTESIAN_POINT('',(2.404962786068,0.84,0.256169064923)); +#19989 = VECTOR('',#19990,1.); +#19990 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19991 = CYLINDRICAL_SURFACE('',#19992,0.31); +#19992 = AXIS2_PLACEMENT_3D('',#19993,#19994,#19995); +#19993 = CARTESIAN_POINT('',(2.710253189502,0.84,0.31)); +#19994 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#19995 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#19996 = ADVANCED_FACE('',(#19997),#20003,.F.); +#19997 = FACE_BOUND('',#19998,.F.); +#19998 = EDGE_LOOP('',(#19999,#20000,#20001,#20002)); +#19999 = ORIENTED_EDGE('',*,*,#18477,.T.); +#20000 = ORIENTED_EDGE('',*,*,#18495,.T.); +#20001 = ORIENTED_EDGE('',*,*,#19986,.F.); +#20002 = ORIENTED_EDGE('',*,*,#18386,.F.); +#20003 = PLANE('',#20004); +#20004 = AXIS2_PLACEMENT_3D('',#20005,#20006,#20007); +#20005 = CARTESIAN_POINT('',(2.348480775301,0.84,0.612364817767)); +#20006 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#20007 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#20008 = ADVANCED_FACE('',(#20009),#20020,.T.); +#20009 = FACE_BOUND('',#20010,.T.); +#20010 = EDGE_LOOP('',(#20011,#20012,#20013,#20014)); +#20011 = ORIENTED_EDGE('',*,*,#18667,.T.); +#20012 = ORIENTED_EDGE('',*,*,#19178,.T.); +#20013 = ORIENTED_EDGE('',*,*,#18776,.F.); +#20014 = ORIENTED_EDGE('',*,*,#20015,.F.); +#20015 = EDGE_CURVE('',#18660,#18769,#20016,.T.); +#20016 = LINE('',#20017,#20018); +#20017 = CARTESIAN_POINT('',(2.555290403434,-0.43,0.648830935077)); +#20018 = VECTOR('',#20019,1.); +#20019 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20020 = CYLINDRICAL_SURFACE('',#20021,0.31); +#20021 = AXIS2_PLACEMENT_3D('',#20022,#20023,#20024); +#20022 = CARTESIAN_POINT('',(2.25,-0.43,0.595)); +#20023 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20024 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#20025 = ADVANCED_FACE('',(#20026),#20037,.F.); +#20026 = FACE_BOUND('',#20027,.F.); +#20027 = EDGE_LOOP('',(#20028,#20034,#20035,#20036)); +#20028 = ORIENTED_EDGE('',*,*,#20029,.T.); +#20029 = EDGE_CURVE('',#18651,#18760,#20030,.T.); +#20030 = LINE('',#20031,#20032); +#20031 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#20032 = VECTOR('',#20033,1.); +#20033 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20034 = ORIENTED_EDGE('',*,*,#18768,.T.); +#20035 = ORIENTED_EDGE('',*,*,#20015,.F.); +#20036 = ORIENTED_EDGE('',*,*,#18659,.F.); +#20037 = PLANE('',#20038); +#20038 = AXIS2_PLACEMENT_3D('',#20039,#20040,#20041); +#20039 = CARTESIAN_POINT('',(2.611772414201,-0.43,0.292635182233)); +#20040 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#20041 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#20042 = ADVANCED_FACE('',(#20043),#20054,.F.); +#20043 = FACE_BOUND('',#20044,.F.); +#20044 = EDGE_LOOP('',(#20045,#20051,#20052,#20053)); +#20045 = ORIENTED_EDGE('',*,*,#20046,.T.); +#20046 = EDGE_CURVE('',#18643,#18752,#20047,.T.); +#20047 = LINE('',#20048,#20049); +#20048 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.21)); +#20049 = VECTOR('',#20050,1.); +#20050 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20051 = ORIENTED_EDGE('',*,*,#18759,.T.); +#20052 = ORIENTED_EDGE('',*,*,#20029,.F.); +#20053 = ORIENTED_EDGE('',*,*,#18650,.F.); +#20054 = CYLINDRICAL_SURFACE('',#20055,0.1); +#20055 = AXIS2_PLACEMENT_3D('',#20056,#20057,#20058); +#20056 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#20057 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20058 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#20059 = ADVANCED_FACE('',(#20060),#20071,.F.); +#20060 = FACE_BOUND('',#20061,.F.); +#20061 = EDGE_LOOP('',(#20062,#20068,#20069,#20070)); +#20062 = ORIENTED_EDGE('',*,*,#20063,.T.); +#20063 = EDGE_CURVE('',#18635,#18744,#20064,.T.); +#20064 = LINE('',#20065,#20066); +#20065 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#20066 = VECTOR('',#20067,1.); +#20067 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20068 = ORIENTED_EDGE('',*,*,#18751,.T.); +#20069 = ORIENTED_EDGE('',*,*,#20046,.F.); +#20070 = ORIENTED_EDGE('',*,*,#18642,.F.); +#20071 = PLANE('',#20072); +#20072 = AXIS2_PLACEMENT_3D('',#20073,#20074,#20075); +#20073 = CARTESIAN_POINT('',(3.,-0.43,0.21)); +#20074 = DIRECTION('',(0.,0.,-1.)); +#20075 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#20076 = ADVANCED_FACE('',(#20077),#20088,.F.); +#20077 = FACE_BOUND('',#20078,.F.); +#20078 = EDGE_LOOP('',(#20079,#20085,#20086,#20087)); +#20079 = ORIENTED_EDGE('',*,*,#20080,.T.); +#20080 = EDGE_CURVE('',#18627,#18736,#20081,.T.); +#20081 = LINE('',#20082,#20083); +#20082 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#20083 = VECTOR('',#20084,1.); +#20084 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20085 = ORIENTED_EDGE('',*,*,#18743,.T.); +#20086 = ORIENTED_EDGE('',*,*,#20063,.F.); +#20087 = ORIENTED_EDGE('',*,*,#18634,.F.); +#20088 = PLANE('',#20089); +#20089 = AXIS2_PLACEMENT_3D('',#20090,#20091,#20092); +#20090 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#20091 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#20092 = DIRECTION('',(0.,0.,1.)); +#20093 = ADVANCED_FACE('',(#20094),#20105,.F.); +#20094 = FACE_BOUND('',#20095,.F.); +#20095 = EDGE_LOOP('',(#20096,#20102,#20103,#20104)); +#20096 = ORIENTED_EDGE('',*,*,#20097,.T.); +#20097 = EDGE_CURVE('',#18618,#18727,#20098,.T.); +#20098 = LINE('',#20099,#20100); +#20099 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#20100 = VECTOR('',#20101,1.); +#20101 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20102 = ORIENTED_EDGE('',*,*,#18735,.T.); +#20103 = ORIENTED_EDGE('',*,*,#20080,.F.); +#20104 = ORIENTED_EDGE('',*,*,#18626,.F.); +#20105 = PLANE('',#20106); +#20106 = AXIS2_PLACEMENT_3D('',#20107,#20108,#20109); +#20107 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.)); +#20108 = DIRECTION('',(0.,0.,1.)); +#20109 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#20110 = ADVANCED_FACE('',(#20111),#20122,.T.); +#20111 = FACE_BOUND('',#20112,.T.); +#20112 = EDGE_LOOP('',(#20113,#20114,#20115,#20116)); +#20113 = ORIENTED_EDGE('',*,*,#18617,.T.); +#20114 = ORIENTED_EDGE('',*,*,#20097,.T.); +#20115 = ORIENTED_EDGE('',*,*,#18726,.F.); +#20116 = ORIENTED_EDGE('',*,*,#20117,.F.); +#20117 = EDGE_CURVE('',#18610,#18719,#20118,.T.); +#20118 = LINE('',#20119,#20120); +#20119 = CARTESIAN_POINT('',(2.404962786068,-0.43,0.256169064923)); +#20120 = VECTOR('',#20121,1.); +#20121 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20122 = CYLINDRICAL_SURFACE('',#20123,0.31); +#20123 = AXIS2_PLACEMENT_3D('',#20124,#20125,#20126); +#20124 = CARTESIAN_POINT('',(2.710253189502,-0.43,0.31)); +#20125 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20126 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#20127 = ADVANCED_FACE('',(#20128),#20134,.F.); +#20128 = FACE_BOUND('',#20129,.F.); +#20129 = EDGE_LOOP('',(#20130,#20131,#20132,#20133)); +#20130 = ORIENTED_EDGE('',*,*,#18700,.T.); +#20131 = ORIENTED_EDGE('',*,*,#18718,.T.); +#20132 = ORIENTED_EDGE('',*,*,#20117,.F.); +#20133 = ORIENTED_EDGE('',*,*,#18609,.F.); +#20134 = PLANE('',#20135); +#20135 = AXIS2_PLACEMENT_3D('',#20136,#20137,#20138); +#20136 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.612364817767)); +#20137 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#20138 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#20139 = ADVANCED_FACE('',(#20140),#20151,.T.); +#20140 = FACE_BOUND('',#20141,.T.); +#20141 = EDGE_LOOP('',(#20142,#20143,#20144,#20145)); +#20142 = ORIENTED_EDGE('',*,*,#18890,.T.); +#20143 = ORIENTED_EDGE('',*,*,#19197,.T.); +#20144 = ORIENTED_EDGE('',*,*,#18999,.F.); +#20145 = ORIENTED_EDGE('',*,*,#20146,.F.); +#20146 = EDGE_CURVE('',#18883,#18992,#20147,.T.); +#20147 = LINE('',#20148,#20149); +#20148 = CARTESIAN_POINT('',(2.555290403434,-1.7,0.648830935077)); +#20149 = VECTOR('',#20150,1.); +#20150 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20151 = CYLINDRICAL_SURFACE('',#20152,0.31); +#20152 = AXIS2_PLACEMENT_3D('',#20153,#20154,#20155); +#20153 = CARTESIAN_POINT('',(2.25,-1.7,0.595)); +#20154 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20155 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#20156 = ADVANCED_FACE('',(#20157),#20168,.F.); +#20157 = FACE_BOUND('',#20158,.F.); +#20158 = EDGE_LOOP('',(#20159,#20165,#20166,#20167)); +#20159 = ORIENTED_EDGE('',*,*,#20160,.T.); +#20160 = EDGE_CURVE('',#18874,#18983,#20161,.T.); +#20161 = LINE('',#20162,#20163); +#20162 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#20163 = VECTOR('',#20164,1.); +#20164 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20165 = ORIENTED_EDGE('',*,*,#18991,.T.); +#20166 = ORIENTED_EDGE('',*,*,#20146,.F.); +#20167 = ORIENTED_EDGE('',*,*,#18882,.F.); +#20168 = PLANE('',#20169); +#20169 = AXIS2_PLACEMENT_3D('',#20170,#20171,#20172); +#20170 = CARTESIAN_POINT('',(2.611772414201,-1.7,0.292635182233)); +#20171 = DIRECTION('',(-0.987659986114,-1.096522857085E-16,-0.1566133833 + )); +#20172 = DIRECTION('',(-0.1566133833,-1.738757841037E-17,0.987659986114) + ); +#20173 = ADVANCED_FACE('',(#20174),#20185,.F.); +#20174 = FACE_BOUND('',#20175,.F.); +#20175 = EDGE_LOOP('',(#20176,#20182,#20183,#20184)); +#20176 = ORIENTED_EDGE('',*,*,#20177,.T.); +#20177 = EDGE_CURVE('',#18866,#18975,#20178,.T.); +#20178 = LINE('',#20179,#20180); +#20179 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.21)); +#20180 = VECTOR('',#20181,1.); +#20181 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20182 = ORIENTED_EDGE('',*,*,#18982,.T.); +#20183 = ORIENTED_EDGE('',*,*,#20160,.F.); +#20184 = ORIENTED_EDGE('',*,*,#18873,.F.); +#20185 = CYLINDRICAL_SURFACE('',#20186,0.1); +#20186 = AXIS2_PLACEMENT_3D('',#20187,#20188,#20189); +#20187 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#20188 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20189 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.)); +#20190 = ADVANCED_FACE('',(#20191),#20202,.F.); +#20191 = FACE_BOUND('',#20192,.F.); +#20192 = EDGE_LOOP('',(#20193,#20199,#20200,#20201)); +#20193 = ORIENTED_EDGE('',*,*,#20194,.T.); +#20194 = EDGE_CURVE('',#18858,#18967,#20195,.T.); +#20195 = LINE('',#20196,#20197); +#20196 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#20197 = VECTOR('',#20198,1.); +#20198 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20199 = ORIENTED_EDGE('',*,*,#18974,.T.); +#20200 = ORIENTED_EDGE('',*,*,#20177,.F.); +#20201 = ORIENTED_EDGE('',*,*,#18865,.F.); +#20202 = PLANE('',#20203); +#20203 = AXIS2_PLACEMENT_3D('',#20204,#20205,#20206); +#20204 = CARTESIAN_POINT('',(3.,-1.7,0.21)); +#20205 = DIRECTION('',(0.,0.,-1.)); +#20206 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#20207 = ADVANCED_FACE('',(#20208),#20219,.F.); +#20208 = FACE_BOUND('',#20209,.F.); +#20209 = EDGE_LOOP('',(#20210,#20216,#20217,#20218)); +#20210 = ORIENTED_EDGE('',*,*,#20211,.T.); +#20211 = EDGE_CURVE('',#18850,#18959,#20212,.T.); +#20212 = LINE('',#20213,#20214); +#20213 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#20214 = VECTOR('',#20215,1.); +#20215 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20216 = ORIENTED_EDGE('',*,*,#18966,.T.); +#20217 = ORIENTED_EDGE('',*,*,#20194,.F.); +#20218 = ORIENTED_EDGE('',*,*,#18857,.F.); +#20219 = PLANE('',#20220); +#20220 = AXIS2_PLACEMENT_3D('',#20221,#20222,#20223); +#20221 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#20222 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#20223 = DIRECTION('',(0.,0.,1.)); +#20224 = ADVANCED_FACE('',(#20225),#20236,.F.); +#20225 = FACE_BOUND('',#20226,.F.); +#20226 = EDGE_LOOP('',(#20227,#20233,#20234,#20235)); +#20227 = ORIENTED_EDGE('',*,*,#20228,.T.); +#20228 = EDGE_CURVE('',#18841,#18950,#20229,.T.); +#20229 = LINE('',#20230,#20231); +#20230 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#20231 = VECTOR('',#20232,1.); +#20232 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20233 = ORIENTED_EDGE('',*,*,#18958,.T.); +#20234 = ORIENTED_EDGE('',*,*,#20211,.F.); +#20235 = ORIENTED_EDGE('',*,*,#18849,.F.); +#20236 = PLANE('',#20237); +#20237 = AXIS2_PLACEMENT_3D('',#20238,#20239,#20240); +#20238 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.)); +#20239 = DIRECTION('',(0.,0.,1.)); +#20240 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#20241 = ADVANCED_FACE('',(#20242),#20253,.T.); +#20242 = FACE_BOUND('',#20243,.T.); +#20243 = EDGE_LOOP('',(#20244,#20245,#20246,#20247)); +#20244 = ORIENTED_EDGE('',*,*,#18840,.T.); +#20245 = ORIENTED_EDGE('',*,*,#20228,.T.); +#20246 = ORIENTED_EDGE('',*,*,#18949,.F.); +#20247 = ORIENTED_EDGE('',*,*,#20248,.F.); +#20248 = EDGE_CURVE('',#18833,#18942,#20249,.T.); +#20249 = LINE('',#20250,#20251); +#20250 = CARTESIAN_POINT('',(2.404962786068,-1.7,0.256169064923)); +#20251 = VECTOR('',#20252,1.); +#20252 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20253 = CYLINDRICAL_SURFACE('',#20254,0.31); +#20254 = AXIS2_PLACEMENT_3D('',#20255,#20256,#20257); +#20255 = CARTESIAN_POINT('',(2.710253189502,-1.7,0.31)); +#20256 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#20257 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#20258 = ADVANCED_FACE('',(#20259),#20265,.F.); +#20259 = FACE_BOUND('',#20260,.F.); +#20260 = EDGE_LOOP('',(#20261,#20262,#20263,#20264)); +#20261 = ORIENTED_EDGE('',*,*,#18923,.T.); +#20262 = ORIENTED_EDGE('',*,*,#18941,.T.); +#20263 = ORIENTED_EDGE('',*,*,#20248,.F.); +#20264 = ORIENTED_EDGE('',*,*,#18832,.F.); +#20265 = PLANE('',#20266); +#20266 = AXIS2_PLACEMENT_3D('',#20267,#20268,#20269); +#20267 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.612364817767)); +#20268 = DIRECTION('',(0.987659986114,1.096522857085E-16,0.1566133833)); +#20269 = DIRECTION('',(0.1566133833,1.738757841037E-17,-0.987659986114) + ); +#20270 = ADVANCED_FACE('',(#20271),#20274,.F.); +#20271 = FACE_BOUND('',#20272,.T.); +#20272 = EDGE_LOOP('',(#20273)); +#20273 = ORIENTED_EDGE('',*,*,#19125,.F.); +#20274 = PLANE('',#20275); +#20275 = AXIS2_PLACEMENT_3D('',#20276,#20277,#20278); +#20276 = CARTESIAN_POINT('',(-1.197342035991,1.697342035991,1.55)); +#20277 = DIRECTION('',(0.,0.,-1.)); +#20278 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#20279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20283)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20280,#20281,#20282)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20280 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20281 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20282 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20283 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20280, + 'distance_accuracy_value','confusion accuracy'); +#20284 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20285,#20287); +#20285 = ( REPRESENTATION_RELATIONSHIP('','',#15666,#15643) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20286) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20286 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15644); +#20287 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20288); +#20288 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('18','=>[0:1:1:17]','',#15638, + #15661,$); +#20289 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#15663)); +#20290 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20291,#20293); +#20291 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20292) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20292 = ITEM_DEFINED_TRANSFORMATION('','',#11,#59); +#20293 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20294); +#20294 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('20','DB1','',#5,#10415,$); +#20295 = SHAPE_DEFINITION_REPRESENTATION(#20296,#20302); +#20296 = PRODUCT_DEFINITION_SHAPE('','',#20297); +#20297 = PRODUCT_DEFINITION('design','',#20298,#20301); +#20298 = PRODUCT_DEFINITION_FORMATION('','',#20299); +#20299 = PRODUCT('PinSocket_1x20_P2.54mm_Vertical', + 'PinSocket_1x20_P2.54mm_Vertical','',(#20300)); +#20300 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20301 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20302 = SHAPE_REPRESENTATION('',(#11,#20303),#20307); +#20303 = AXIS2_PLACEMENT_3D('',#20304,#20305,#20306); +#20304 = CARTESIAN_POINT('',(0.,0.,0.)); +#20305 = DIRECTION('',(0.,0.,1.)); +#20306 = DIRECTION('',(1.,0.,-0.)); +#20307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20311)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20308,#20309,#20310)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20308 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20309 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20310 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20311 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20308, + 'distance_accuracy_value','confusion accuracy'); +#20312 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20313,#20315); +#20313 = ( REPRESENTATION_RELATIONSHIP('','',#20302,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20314) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20314 = ITEM_DEFINED_TRANSFORMATION('','',#11,#63); +#20315 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20316); +#20316 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('22','J1','',#5,#20297,$); +#20317 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20299)); +#20318 = SHAPE_DEFINITION_REPRESENTATION(#20319,#20325); +#20319 = PRODUCT_DEFINITION_SHAPE('','',#20320); +#20320 = PRODUCT_DEFINITION('design','',#20321,#20324); +#20321 = PRODUCT_DEFINITION_FORMATION('','',#20322); +#20322 = PRODUCT('PinSocket_1x20_P2.54mm_Vertical', + 'PinSocket_1x20_P2.54mm_Vertical','',(#20323)); +#20323 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20324 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20325 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#20326),#36128); +#20326 = MANIFOLD_SOLID_BREP('',#20327); +#20327 = CLOSED_SHELL('',(#20328,#20368,#20431,#20494,#20511,#21208, + #21230,#21247,#22584,#22596,#22608,#22639,#22663,#22687,#22704, + #22735,#22759,#22783,#22800,#22831,#22855,#22879,#22896,#22927, + #22951,#22975,#22992,#23023,#23047,#23071,#23088,#23119,#23143, + #23167,#23184,#23215,#23239,#23263,#23280,#23311,#23335,#23359, + #23376,#23407,#23431,#23455,#23472,#23503,#23527,#23551,#23568, + #23599,#23623,#23647,#23664,#23695,#23719,#23743,#23760,#23791, + #23815,#23839,#23856,#23887,#23911,#23935,#23952,#23983,#24007, + #24031,#24048,#24079,#24103,#24127,#24144,#24175,#24199,#24223, + #24240,#24271,#24295,#24319,#24336,#24367,#24391,#24415,#24432, + #24463,#24487,#24511,#24528,#24545,#24592,#24609,#24656,#24673, + #24720,#24737,#24784,#24801,#24848,#24865,#24912,#24929,#24976, + #24993,#25040,#25057,#25104,#25121,#25168,#25185,#25232,#25249, + #25296,#25313,#25360,#25377,#25424,#25441,#25488,#25505,#25552, + #25569,#25616,#25633,#25680,#25697,#25744,#25761,#25808,#25825, + #25872,#25889,#25936,#25953,#26000,#26017,#26064,#26081,#26128, + #26145,#26192,#26209,#26256,#26273,#26320,#26337,#26384,#26401, + #26448,#26465,#26512,#26529,#26576,#26593,#26640,#26657,#26704, + #26721,#26768,#26785,#26832,#26849,#26896,#26913,#26960,#26977, + #27024,#27041,#27088,#27119,#27175,#27199,#27248,#27279,#27335, + #27359,#27408,#27439,#27495,#27519,#27568,#27599,#27655,#27679, + #27728,#27759,#27815,#27839,#27888,#27919,#27975,#27999,#28048, + #28079,#28135,#28159,#28208,#28239,#28295,#28319,#28368,#28399, + #28455,#28479,#28528,#28559,#28615,#28639,#28688,#28719,#28775, + #28799,#28848,#28879,#28935,#28959,#29008,#29039,#29095,#29119, + #29168,#29199,#29255,#29279,#29328,#29359,#29415,#29439,#29488, + #29519,#29575,#29599,#29648,#29679,#29735,#29759,#29808,#29839, + #29895,#29919,#29968,#29999,#30055,#30079,#30128,#30159,#30215, + #30239,#30288,#30305,#30322,#30339,#30356,#30368,#30385,#30402, + #30419,#30436,#30448,#30465,#30482,#30499,#30516,#30528,#30545, + #30562,#30579,#30596,#30608,#30625,#30642,#30659,#30676,#30688, + #30705,#30722,#30739,#30756,#30768,#30785,#30802,#30819,#30836, + #30848,#30865,#30882,#30899,#30916,#30928,#30945,#30962,#30979, + #30996,#31008,#31025,#31042,#31059,#31076,#31088,#31105,#31122, + #31139,#31156,#31168,#31185,#31202,#31219,#31236,#31248,#31265, + #31282,#31299,#31316,#31328,#31345,#31362,#31379,#31396,#31408, + #31425,#31442,#31459,#31476,#31488,#31505,#31522,#31539,#31556, + #31568,#31585,#31602,#31619,#31636,#31648,#31665,#31682,#31699, + #31716,#31728,#31745,#31762,#31779,#31796,#31808,#31825,#31842, + #31859,#31876,#31888,#31905,#31922,#31971,#31995,#32037,#32054, + #32071,#32088,#32137,#32161,#32203,#32220,#32237,#32254,#32303, + #32327,#32369,#32386,#32403,#32420,#32469,#32493,#32535,#32552, + #32569,#32586,#32635,#32659,#32701,#32718,#32735,#32752,#32801, + #32825,#32867,#32884,#32901,#32918,#32967,#32991,#33033,#33050, + #33067,#33084,#33133,#33157,#33199,#33216,#33233,#33250,#33299, + #33323,#33365,#33382,#33399,#33416,#33465,#33489,#33531,#33548, + #33565,#33582,#33631,#33655,#33697,#33714,#33731,#33748,#33797, + #33821,#33863,#33880,#33897,#33914,#33963,#33987,#34029,#34046, + #34063,#34080,#34129,#34153,#34195,#34212,#34229,#34246,#34295, + #34319,#34361,#34378,#34395,#34412,#34461,#34485,#34527,#34544, + #34561,#34578,#34627,#34651,#34693,#34710,#34727,#34744,#34793, + #34817,#34859,#34876,#34893,#34910,#34959,#34983,#35025,#35042, + #35059,#35076,#35125,#35149,#35191,#35208,#35225,#35242,#35254, + #35271,#35288,#35300,#35317,#35334,#35346,#35363,#35380,#35392, + #35409,#35426,#35438,#35455,#35472,#35484,#35501,#35518,#35530, + #35547,#35564,#35576,#35593,#35610,#35622,#35639,#35656,#35668, + #35685,#35702,#35714,#35731,#35748,#35760,#35777,#35794,#35806, + #35823,#35840,#35852,#35869,#35886,#35898,#35915,#35932,#35944, + #35961,#35978,#35990,#36007,#36024,#36036,#36053,#36070,#36082, + #36099,#36116)); +#20328 = ADVANCED_FACE('',(#20329),#20363,.F.); +#20329 = FACE_BOUND('',#20330,.F.); +#20330 = EDGE_LOOP('',(#20331,#20341,#20349,#20357)); +#20331 = ORIENTED_EDGE('',*,*,#20332,.T.); +#20332 = EDGE_CURVE('',#20333,#20335,#20337,.T.); +#20333 = VERTEX_POINT('',#20334); +#20334 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20335 = VERTEX_POINT('',#20336); +#20336 = CARTESIAN_POINT('',(1.27,-49.53,8.5)); +#20337 = LINE('',#20338,#20339); +#20338 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20339 = VECTOR('',#20340,1.); +#20340 = DIRECTION('',(0.,0.,1.)); +#20341 = ORIENTED_EDGE('',*,*,#20342,.T.); +#20342 = EDGE_CURVE('',#20335,#20343,#20345,.T.); +#20343 = VERTEX_POINT('',#20344); +#20344 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#20345 = LINE('',#20346,#20347); +#20346 = CARTESIAN_POINT('',(1.27,-49.53,8.5)); +#20347 = VECTOR('',#20348,1.); +#20348 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20349 = ORIENTED_EDGE('',*,*,#20350,.F.); +#20350 = EDGE_CURVE('',#20351,#20343,#20353,.T.); +#20351 = VERTEX_POINT('',#20352); +#20352 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20353 = LINE('',#20354,#20355); +#20354 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20355 = VECTOR('',#20356,1.); +#20356 = DIRECTION('',(0.,0.,1.)); +#20357 = ORIENTED_EDGE('',*,*,#20358,.F.); +#20358 = EDGE_CURVE('',#20333,#20351,#20359,.T.); +#20359 = LINE('',#20360,#20361); +#20360 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20361 = VECTOR('',#20362,1.); +#20362 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20363 = PLANE('',#20364); +#20364 = AXIS2_PLACEMENT_3D('',#20365,#20366,#20367); +#20365 = CARTESIAN_POINT('',(1.27,-49.53,0.)); +#20366 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20367 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20368 = ADVANCED_FACE('',(#20369),#20426,.F.); +#20369 = FACE_BOUND('',#20370,.F.); +#20370 = EDGE_LOOP('',(#20371,#20381,#20389,#20395,#20396,#20404,#20412, + #20420)); +#20371 = ORIENTED_EDGE('',*,*,#20372,.F.); +#20372 = EDGE_CURVE('',#20373,#20375,#20377,.T.); +#20373 = VERTEX_POINT('',#20374); +#20374 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20375 = VERTEX_POINT('',#20376); +#20376 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.)); +#20377 = LINE('',#20378,#20379); +#20378 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20379 = VECTOR('',#20380,1.); +#20380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20381 = ORIENTED_EDGE('',*,*,#20382,.T.); +#20382 = EDGE_CURVE('',#20373,#20383,#20385,.T.); +#20383 = VERTEX_POINT('',#20384); +#20384 = CARTESIAN_POINT('',(-1.27,-49.53,8.5)); +#20385 = LINE('',#20386,#20387); +#20386 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20387 = VECTOR('',#20388,1.); +#20388 = DIRECTION('',(0.,0.,1.)); +#20389 = ORIENTED_EDGE('',*,*,#20390,.T.); +#20390 = EDGE_CURVE('',#20383,#20335,#20391,.T.); +#20391 = LINE('',#20392,#20393); +#20392 = CARTESIAN_POINT('',(-1.27,-49.53,8.5)); +#20393 = VECTOR('',#20394,1.); +#20394 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20395 = ORIENTED_EDGE('',*,*,#20332,.F.); +#20396 = ORIENTED_EDGE('',*,*,#20397,.F.); +#20397 = EDGE_CURVE('',#20398,#20333,#20400,.T.); +#20398 = VERTEX_POINT('',#20399); +#20399 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#20400 = LINE('',#20401,#20402); +#20401 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20402 = VECTOR('',#20403,1.); +#20403 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20404 = ORIENTED_EDGE('',*,*,#20405,.T.); +#20405 = EDGE_CURVE('',#20398,#20406,#20408,.T.); +#20406 = VERTEX_POINT('',#20407); +#20407 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.2)); +#20408 = LINE('',#20409,#20410); +#20409 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#20410 = VECTOR('',#20411,1.); +#20411 = DIRECTION('',(0.,0.,1.)); +#20412 = ORIENTED_EDGE('',*,*,#20413,.F.); +#20413 = EDGE_CURVE('',#20414,#20406,#20416,.T.); +#20414 = VERTEX_POINT('',#20415); +#20415 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.2)); +#20416 = LINE('',#20417,#20418); +#20417 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.2)); +#20418 = VECTOR('',#20419,1.); +#20419 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20420 = ORIENTED_EDGE('',*,*,#20421,.F.); +#20421 = EDGE_CURVE('',#20375,#20414,#20422,.T.); +#20422 = LINE('',#20423,#20424); +#20423 = CARTESIAN_POINT('',(-0.846666666667,-49.53,0.)); +#20424 = VECTOR('',#20425,1.); +#20425 = DIRECTION('',(0.,0.,1.)); +#20426 = PLANE('',#20427); +#20427 = AXIS2_PLACEMENT_3D('',#20428,#20429,#20430); +#20428 = CARTESIAN_POINT('',(-1.27,-49.53,0.)); +#20429 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20430 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20431 = ADVANCED_FACE('',(#20432),#20489,.F.); +#20432 = FACE_BOUND('',#20433,.F.); +#20433 = EDGE_LOOP('',(#20434,#20442,#20443,#20451,#20459,#20467,#20475, + #20483)); +#20434 = ORIENTED_EDGE('',*,*,#20435,.F.); +#20435 = EDGE_CURVE('',#20351,#20436,#20438,.T.); +#20436 = VERTEX_POINT('',#20437); +#20437 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#20438 = LINE('',#20439,#20440); +#20439 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20440 = VECTOR('',#20441,1.); +#20441 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20442 = ORIENTED_EDGE('',*,*,#20350,.T.); +#20443 = ORIENTED_EDGE('',*,*,#20444,.T.); +#20444 = EDGE_CURVE('',#20343,#20445,#20447,.T.); +#20445 = VERTEX_POINT('',#20446); +#20446 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#20447 = LINE('',#20448,#20449); +#20448 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#20449 = VECTOR('',#20450,1.); +#20450 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20451 = ORIENTED_EDGE('',*,*,#20452,.F.); +#20452 = EDGE_CURVE('',#20453,#20445,#20455,.T.); +#20453 = VERTEX_POINT('',#20454); +#20454 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#20455 = LINE('',#20456,#20457); +#20456 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#20457 = VECTOR('',#20458,1.); +#20458 = DIRECTION('',(0.,0.,1.)); +#20459 = ORIENTED_EDGE('',*,*,#20460,.F.); +#20460 = EDGE_CURVE('',#20461,#20453,#20463,.T.); +#20461 = VERTEX_POINT('',#20462); +#20462 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#20463 = LINE('',#20464,#20465); +#20464 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20465 = VECTOR('',#20466,1.); +#20466 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20467 = ORIENTED_EDGE('',*,*,#20468,.T.); +#20468 = EDGE_CURVE('',#20461,#20469,#20471,.T.); +#20469 = VERTEX_POINT('',#20470); +#20470 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#20471 = LINE('',#20472,#20473); +#20472 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#20473 = VECTOR('',#20474,1.); +#20474 = DIRECTION('',(0.,0.,1.)); +#20475 = ORIENTED_EDGE('',*,*,#20476,.F.); +#20476 = EDGE_CURVE('',#20477,#20469,#20479,.T.); +#20477 = VERTEX_POINT('',#20478); +#20478 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#20479 = LINE('',#20480,#20481); +#20480 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#20481 = VECTOR('',#20482,1.); +#20482 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20483 = ORIENTED_EDGE('',*,*,#20484,.F.); +#20484 = EDGE_CURVE('',#20436,#20477,#20485,.T.); +#20485 = LINE('',#20486,#20487); +#20486 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#20487 = VECTOR('',#20488,1.); +#20488 = DIRECTION('',(0.,0.,1.)); +#20489 = PLANE('',#20490); +#20490 = AXIS2_PLACEMENT_3D('',#20491,#20492,#20493); +#20491 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#20492 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20493 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20494 = ADVANCED_FACE('',(#20495),#20506,.F.); +#20495 = FACE_BOUND('',#20496,.F.); +#20496 = EDGE_LOOP('',(#20497,#20498,#20499,#20500)); +#20497 = ORIENTED_EDGE('',*,*,#20397,.T.); +#20498 = ORIENTED_EDGE('',*,*,#20358,.T.); +#20499 = ORIENTED_EDGE('',*,*,#20435,.T.); +#20500 = ORIENTED_EDGE('',*,*,#20501,.F.); +#20501 = EDGE_CURVE('',#20398,#20436,#20502,.T.); +#20502 = LINE('',#20503,#20504); +#20503 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#20504 = VECTOR('',#20505,1.); +#20505 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20506 = PLANE('',#20507); +#20507 = AXIS2_PLACEMENT_3D('',#20508,#20509,#20510); +#20508 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,0.)); +#20509 = DIRECTION('',(0.,0.,1.)); +#20510 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#20511 = ADVANCED_FACE('',(#20512,#20523,#20557,#20591,#20625,#20659, + #20693,#20727,#20761,#20795,#20829,#20863,#20897,#20931,#20965, + #20999,#21033,#21067,#21101,#21135,#21169),#21203,.T.); +#20512 = FACE_BOUND('',#20513,.T.); +#20513 = EDGE_LOOP('',(#20514,#20515,#20516,#20522)); +#20514 = ORIENTED_EDGE('',*,*,#20342,.T.); +#20515 = ORIENTED_EDGE('',*,*,#20444,.T.); +#20516 = ORIENTED_EDGE('',*,*,#20517,.T.); +#20517 = EDGE_CURVE('',#20445,#20383,#20518,.T.); +#20518 = LINE('',#20519,#20520); +#20519 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#20520 = VECTOR('',#20521,1.); +#20521 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20522 = ORIENTED_EDGE('',*,*,#20390,.T.); +#20523 = FACE_BOUND('',#20524,.T.); +#20524 = EDGE_LOOP('',(#20525,#20535,#20543,#20551)); +#20525 = ORIENTED_EDGE('',*,*,#20526,.F.); +#20526 = EDGE_CURVE('',#20527,#20529,#20531,.T.); +#20527 = VERTEX_POINT('',#20528); +#20528 = CARTESIAN_POINT('',(0.6,-48.86,8.5)); +#20529 = VERTEX_POINT('',#20530); +#20530 = CARTESIAN_POINT('',(0.6,-47.66,8.5)); +#20531 = LINE('',#20532,#20533); +#20532 = CARTESIAN_POINT('',(0.6,-48.86,8.5)); +#20533 = VECTOR('',#20534,1.); +#20534 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20535 = ORIENTED_EDGE('',*,*,#20536,.F.); +#20536 = EDGE_CURVE('',#20537,#20527,#20539,.T.); +#20537 = VERTEX_POINT('',#20538); +#20538 = CARTESIAN_POINT('',(-0.6,-48.86,8.5)); +#20539 = LINE('',#20540,#20541); +#20540 = CARTESIAN_POINT('',(-0.6,-48.86,8.5)); +#20541 = VECTOR('',#20542,1.); +#20542 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20543 = ORIENTED_EDGE('',*,*,#20544,.F.); +#20544 = EDGE_CURVE('',#20545,#20537,#20547,.T.); +#20545 = VERTEX_POINT('',#20546); +#20546 = CARTESIAN_POINT('',(-0.6,-47.66,8.5)); +#20547 = LINE('',#20548,#20549); +#20548 = CARTESIAN_POINT('',(-0.6,-47.66,8.5)); +#20549 = VECTOR('',#20550,1.); +#20550 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20551 = ORIENTED_EDGE('',*,*,#20552,.F.); +#20552 = EDGE_CURVE('',#20529,#20545,#20553,.T.); +#20553 = LINE('',#20554,#20555); +#20554 = CARTESIAN_POINT('',(0.6,-47.66,8.5)); +#20555 = VECTOR('',#20556,1.); +#20556 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20557 = FACE_BOUND('',#20558,.T.); +#20558 = EDGE_LOOP('',(#20559,#20569,#20577,#20585)); +#20559 = ORIENTED_EDGE('',*,*,#20560,.F.); +#20560 = EDGE_CURVE('',#20561,#20563,#20565,.T.); +#20561 = VERTEX_POINT('',#20562); +#20562 = CARTESIAN_POINT('',(0.6,-46.32,8.5)); +#20563 = VERTEX_POINT('',#20564); +#20564 = CARTESIAN_POINT('',(0.6,-45.12,8.5)); +#20565 = LINE('',#20566,#20567); +#20566 = CARTESIAN_POINT('',(0.6,-46.32,8.5)); +#20567 = VECTOR('',#20568,1.); +#20568 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20569 = ORIENTED_EDGE('',*,*,#20570,.F.); +#20570 = EDGE_CURVE('',#20571,#20561,#20573,.T.); +#20571 = VERTEX_POINT('',#20572); +#20572 = CARTESIAN_POINT('',(-0.6,-46.32,8.5)); +#20573 = LINE('',#20574,#20575); +#20574 = CARTESIAN_POINT('',(-0.6,-46.32,8.5)); +#20575 = VECTOR('',#20576,1.); +#20576 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20577 = ORIENTED_EDGE('',*,*,#20578,.F.); +#20578 = EDGE_CURVE('',#20579,#20571,#20581,.T.); +#20579 = VERTEX_POINT('',#20580); +#20580 = CARTESIAN_POINT('',(-0.6,-45.12,8.5)); +#20581 = LINE('',#20582,#20583); +#20582 = CARTESIAN_POINT('',(-0.6,-45.12,8.5)); +#20583 = VECTOR('',#20584,1.); +#20584 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20585 = ORIENTED_EDGE('',*,*,#20586,.F.); +#20586 = EDGE_CURVE('',#20563,#20579,#20587,.T.); +#20587 = LINE('',#20588,#20589); +#20588 = CARTESIAN_POINT('',(0.6,-45.12,8.5)); +#20589 = VECTOR('',#20590,1.); +#20590 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20591 = FACE_BOUND('',#20592,.T.); +#20592 = EDGE_LOOP('',(#20593,#20603,#20611,#20619)); +#20593 = ORIENTED_EDGE('',*,*,#20594,.F.); +#20594 = EDGE_CURVE('',#20595,#20597,#20599,.T.); +#20595 = VERTEX_POINT('',#20596); +#20596 = CARTESIAN_POINT('',(0.6,-43.78,8.5)); +#20597 = VERTEX_POINT('',#20598); +#20598 = CARTESIAN_POINT('',(0.6,-42.58,8.5)); +#20599 = LINE('',#20600,#20601); +#20600 = CARTESIAN_POINT('',(0.6,-43.78,8.5)); +#20601 = VECTOR('',#20602,1.); +#20602 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20603 = ORIENTED_EDGE('',*,*,#20604,.F.); +#20604 = EDGE_CURVE('',#20605,#20595,#20607,.T.); +#20605 = VERTEX_POINT('',#20606); +#20606 = CARTESIAN_POINT('',(-0.6,-43.78,8.5)); +#20607 = LINE('',#20608,#20609); +#20608 = CARTESIAN_POINT('',(-0.6,-43.78,8.5)); +#20609 = VECTOR('',#20610,1.); +#20610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20611 = ORIENTED_EDGE('',*,*,#20612,.F.); +#20612 = EDGE_CURVE('',#20613,#20605,#20615,.T.); +#20613 = VERTEX_POINT('',#20614); +#20614 = CARTESIAN_POINT('',(-0.6,-42.58,8.5)); +#20615 = LINE('',#20616,#20617); +#20616 = CARTESIAN_POINT('',(-0.6,-42.58,8.5)); +#20617 = VECTOR('',#20618,1.); +#20618 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20619 = ORIENTED_EDGE('',*,*,#20620,.F.); +#20620 = EDGE_CURVE('',#20597,#20613,#20621,.T.); +#20621 = LINE('',#20622,#20623); +#20622 = CARTESIAN_POINT('',(0.6,-42.58,8.5)); +#20623 = VECTOR('',#20624,1.); +#20624 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20625 = FACE_BOUND('',#20626,.T.); +#20626 = EDGE_LOOP('',(#20627,#20637,#20645,#20653)); +#20627 = ORIENTED_EDGE('',*,*,#20628,.F.); +#20628 = EDGE_CURVE('',#20629,#20631,#20633,.T.); +#20629 = VERTEX_POINT('',#20630); +#20630 = CARTESIAN_POINT('',(0.6,-41.24,8.5)); +#20631 = VERTEX_POINT('',#20632); +#20632 = CARTESIAN_POINT('',(0.6,-40.04,8.5)); +#20633 = LINE('',#20634,#20635); +#20634 = CARTESIAN_POINT('',(0.6,-41.24,8.5)); +#20635 = VECTOR('',#20636,1.); +#20636 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20637 = ORIENTED_EDGE('',*,*,#20638,.F.); +#20638 = EDGE_CURVE('',#20639,#20629,#20641,.T.); +#20639 = VERTEX_POINT('',#20640); +#20640 = CARTESIAN_POINT('',(-0.6,-41.24,8.5)); +#20641 = LINE('',#20642,#20643); +#20642 = CARTESIAN_POINT('',(-0.6,-41.24,8.5)); +#20643 = VECTOR('',#20644,1.); +#20644 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20645 = ORIENTED_EDGE('',*,*,#20646,.F.); +#20646 = EDGE_CURVE('',#20647,#20639,#20649,.T.); +#20647 = VERTEX_POINT('',#20648); +#20648 = CARTESIAN_POINT('',(-0.6,-40.04,8.5)); +#20649 = LINE('',#20650,#20651); +#20650 = CARTESIAN_POINT('',(-0.6,-40.04,8.5)); +#20651 = VECTOR('',#20652,1.); +#20652 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20653 = ORIENTED_EDGE('',*,*,#20654,.F.); +#20654 = EDGE_CURVE('',#20631,#20647,#20655,.T.); +#20655 = LINE('',#20656,#20657); +#20656 = CARTESIAN_POINT('',(0.6,-40.04,8.5)); +#20657 = VECTOR('',#20658,1.); +#20658 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20659 = FACE_BOUND('',#20660,.T.); +#20660 = EDGE_LOOP('',(#20661,#20671,#20679,#20687)); +#20661 = ORIENTED_EDGE('',*,*,#20662,.F.); +#20662 = EDGE_CURVE('',#20663,#20665,#20667,.T.); +#20663 = VERTEX_POINT('',#20664); +#20664 = CARTESIAN_POINT('',(0.6,-38.7,8.5)); +#20665 = VERTEX_POINT('',#20666); +#20666 = CARTESIAN_POINT('',(0.6,-37.5,8.5)); +#20667 = LINE('',#20668,#20669); +#20668 = CARTESIAN_POINT('',(0.6,-38.7,8.5)); +#20669 = VECTOR('',#20670,1.); +#20670 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20671 = ORIENTED_EDGE('',*,*,#20672,.F.); +#20672 = EDGE_CURVE('',#20673,#20663,#20675,.T.); +#20673 = VERTEX_POINT('',#20674); +#20674 = CARTESIAN_POINT('',(-0.6,-38.7,8.5)); +#20675 = LINE('',#20676,#20677); +#20676 = CARTESIAN_POINT('',(-0.6,-38.7,8.5)); +#20677 = VECTOR('',#20678,1.); +#20678 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20679 = ORIENTED_EDGE('',*,*,#20680,.F.); +#20680 = EDGE_CURVE('',#20681,#20673,#20683,.T.); +#20681 = VERTEX_POINT('',#20682); +#20682 = CARTESIAN_POINT('',(-0.6,-37.5,8.5)); +#20683 = LINE('',#20684,#20685); +#20684 = CARTESIAN_POINT('',(-0.6,-37.5,8.5)); +#20685 = VECTOR('',#20686,1.); +#20686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20687 = ORIENTED_EDGE('',*,*,#20688,.F.); +#20688 = EDGE_CURVE('',#20665,#20681,#20689,.T.); +#20689 = LINE('',#20690,#20691); +#20690 = CARTESIAN_POINT('',(0.6,-37.5,8.5)); +#20691 = VECTOR('',#20692,1.); +#20692 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20693 = FACE_BOUND('',#20694,.T.); +#20694 = EDGE_LOOP('',(#20695,#20705,#20713,#20721)); +#20695 = ORIENTED_EDGE('',*,*,#20696,.F.); +#20696 = EDGE_CURVE('',#20697,#20699,#20701,.T.); +#20697 = VERTEX_POINT('',#20698); +#20698 = CARTESIAN_POINT('',(0.6,-36.16,8.5)); +#20699 = VERTEX_POINT('',#20700); +#20700 = CARTESIAN_POINT('',(0.6,-34.96,8.5)); +#20701 = LINE('',#20702,#20703); +#20702 = CARTESIAN_POINT('',(0.6,-36.16,8.5)); +#20703 = VECTOR('',#20704,1.); +#20704 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20705 = ORIENTED_EDGE('',*,*,#20706,.F.); +#20706 = EDGE_CURVE('',#20707,#20697,#20709,.T.); +#20707 = VERTEX_POINT('',#20708); +#20708 = CARTESIAN_POINT('',(-0.6,-36.16,8.5)); +#20709 = LINE('',#20710,#20711); +#20710 = CARTESIAN_POINT('',(-0.6,-36.16,8.5)); +#20711 = VECTOR('',#20712,1.); +#20712 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20713 = ORIENTED_EDGE('',*,*,#20714,.F.); +#20714 = EDGE_CURVE('',#20715,#20707,#20717,.T.); +#20715 = VERTEX_POINT('',#20716); +#20716 = CARTESIAN_POINT('',(-0.6,-34.96,8.5)); +#20717 = LINE('',#20718,#20719); +#20718 = CARTESIAN_POINT('',(-0.6,-34.96,8.5)); +#20719 = VECTOR('',#20720,1.); +#20720 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20721 = ORIENTED_EDGE('',*,*,#20722,.F.); +#20722 = EDGE_CURVE('',#20699,#20715,#20723,.T.); +#20723 = LINE('',#20724,#20725); +#20724 = CARTESIAN_POINT('',(0.6,-34.96,8.5)); +#20725 = VECTOR('',#20726,1.); +#20726 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20727 = FACE_BOUND('',#20728,.T.); +#20728 = EDGE_LOOP('',(#20729,#20739,#20747,#20755)); +#20729 = ORIENTED_EDGE('',*,*,#20730,.F.); +#20730 = EDGE_CURVE('',#20731,#20733,#20735,.T.); +#20731 = VERTEX_POINT('',#20732); +#20732 = CARTESIAN_POINT('',(0.6,-33.62,8.5)); +#20733 = VERTEX_POINT('',#20734); +#20734 = CARTESIAN_POINT('',(0.6,-32.42,8.5)); +#20735 = LINE('',#20736,#20737); +#20736 = CARTESIAN_POINT('',(0.6,-33.62,8.5)); +#20737 = VECTOR('',#20738,1.); +#20738 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20739 = ORIENTED_EDGE('',*,*,#20740,.F.); +#20740 = EDGE_CURVE('',#20741,#20731,#20743,.T.); +#20741 = VERTEX_POINT('',#20742); +#20742 = CARTESIAN_POINT('',(-0.6,-33.62,8.5)); +#20743 = LINE('',#20744,#20745); +#20744 = CARTESIAN_POINT('',(-0.6,-33.62,8.5)); +#20745 = VECTOR('',#20746,1.); +#20746 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20747 = ORIENTED_EDGE('',*,*,#20748,.F.); +#20748 = EDGE_CURVE('',#20749,#20741,#20751,.T.); +#20749 = VERTEX_POINT('',#20750); +#20750 = CARTESIAN_POINT('',(-0.6,-32.42,8.5)); +#20751 = LINE('',#20752,#20753); +#20752 = CARTESIAN_POINT('',(-0.6,-32.42,8.5)); +#20753 = VECTOR('',#20754,1.); +#20754 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20755 = ORIENTED_EDGE('',*,*,#20756,.F.); +#20756 = EDGE_CURVE('',#20733,#20749,#20757,.T.); +#20757 = LINE('',#20758,#20759); +#20758 = CARTESIAN_POINT('',(0.6,-32.42,8.5)); +#20759 = VECTOR('',#20760,1.); +#20760 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20761 = FACE_BOUND('',#20762,.T.); +#20762 = EDGE_LOOP('',(#20763,#20773,#20781,#20789)); +#20763 = ORIENTED_EDGE('',*,*,#20764,.F.); +#20764 = EDGE_CURVE('',#20765,#20767,#20769,.T.); +#20765 = VERTEX_POINT('',#20766); +#20766 = CARTESIAN_POINT('',(0.6,-31.08,8.5)); +#20767 = VERTEX_POINT('',#20768); +#20768 = CARTESIAN_POINT('',(0.6,-29.88,8.5)); +#20769 = LINE('',#20770,#20771); +#20770 = CARTESIAN_POINT('',(0.6,-31.08,8.5)); +#20771 = VECTOR('',#20772,1.); +#20772 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20773 = ORIENTED_EDGE('',*,*,#20774,.F.); +#20774 = EDGE_CURVE('',#20775,#20765,#20777,.T.); +#20775 = VERTEX_POINT('',#20776); +#20776 = CARTESIAN_POINT('',(-0.6,-31.08,8.5)); +#20777 = LINE('',#20778,#20779); +#20778 = CARTESIAN_POINT('',(-0.6,-31.08,8.5)); +#20779 = VECTOR('',#20780,1.); +#20780 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20781 = ORIENTED_EDGE('',*,*,#20782,.F.); +#20782 = EDGE_CURVE('',#20783,#20775,#20785,.T.); +#20783 = VERTEX_POINT('',#20784); +#20784 = CARTESIAN_POINT('',(-0.6,-29.88,8.5)); +#20785 = LINE('',#20786,#20787); +#20786 = CARTESIAN_POINT('',(-0.6,-29.88,8.5)); +#20787 = VECTOR('',#20788,1.); +#20788 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20789 = ORIENTED_EDGE('',*,*,#20790,.F.); +#20790 = EDGE_CURVE('',#20767,#20783,#20791,.T.); +#20791 = LINE('',#20792,#20793); +#20792 = CARTESIAN_POINT('',(0.6,-29.88,8.5)); +#20793 = VECTOR('',#20794,1.); +#20794 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20795 = FACE_BOUND('',#20796,.T.); +#20796 = EDGE_LOOP('',(#20797,#20807,#20815,#20823)); +#20797 = ORIENTED_EDGE('',*,*,#20798,.F.); +#20798 = EDGE_CURVE('',#20799,#20801,#20803,.T.); +#20799 = VERTEX_POINT('',#20800); +#20800 = CARTESIAN_POINT('',(0.6,-28.54,8.5)); +#20801 = VERTEX_POINT('',#20802); +#20802 = CARTESIAN_POINT('',(0.6,-27.34,8.5)); +#20803 = LINE('',#20804,#20805); +#20804 = CARTESIAN_POINT('',(0.6,-28.54,8.5)); +#20805 = VECTOR('',#20806,1.); +#20806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20807 = ORIENTED_EDGE('',*,*,#20808,.F.); +#20808 = EDGE_CURVE('',#20809,#20799,#20811,.T.); +#20809 = VERTEX_POINT('',#20810); +#20810 = CARTESIAN_POINT('',(-0.6,-28.54,8.5)); +#20811 = LINE('',#20812,#20813); +#20812 = CARTESIAN_POINT('',(-0.6,-28.54,8.5)); +#20813 = VECTOR('',#20814,1.); +#20814 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20815 = ORIENTED_EDGE('',*,*,#20816,.F.); +#20816 = EDGE_CURVE('',#20817,#20809,#20819,.T.); +#20817 = VERTEX_POINT('',#20818); +#20818 = CARTESIAN_POINT('',(-0.6,-27.34,8.5)); +#20819 = LINE('',#20820,#20821); +#20820 = CARTESIAN_POINT('',(-0.6,-27.34,8.5)); +#20821 = VECTOR('',#20822,1.); +#20822 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20823 = ORIENTED_EDGE('',*,*,#20824,.F.); +#20824 = EDGE_CURVE('',#20801,#20817,#20825,.T.); +#20825 = LINE('',#20826,#20827); +#20826 = CARTESIAN_POINT('',(0.6,-27.34,8.5)); +#20827 = VECTOR('',#20828,1.); +#20828 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20829 = FACE_BOUND('',#20830,.T.); +#20830 = EDGE_LOOP('',(#20831,#20841,#20849,#20857)); +#20831 = ORIENTED_EDGE('',*,*,#20832,.F.); +#20832 = EDGE_CURVE('',#20833,#20835,#20837,.T.); +#20833 = VERTEX_POINT('',#20834); +#20834 = CARTESIAN_POINT('',(0.6,-26.,8.5)); +#20835 = VERTEX_POINT('',#20836); +#20836 = CARTESIAN_POINT('',(0.6,-24.8,8.5)); +#20837 = LINE('',#20838,#20839); +#20838 = CARTESIAN_POINT('',(0.6,-26.,8.5)); +#20839 = VECTOR('',#20840,1.); +#20840 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20841 = ORIENTED_EDGE('',*,*,#20842,.F.); +#20842 = EDGE_CURVE('',#20843,#20833,#20845,.T.); +#20843 = VERTEX_POINT('',#20844); +#20844 = CARTESIAN_POINT('',(-0.6,-26.,8.5)); +#20845 = LINE('',#20846,#20847); +#20846 = CARTESIAN_POINT('',(-0.6,-26.,8.5)); +#20847 = VECTOR('',#20848,1.); +#20848 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20849 = ORIENTED_EDGE('',*,*,#20850,.F.); +#20850 = EDGE_CURVE('',#20851,#20843,#20853,.T.); +#20851 = VERTEX_POINT('',#20852); +#20852 = CARTESIAN_POINT('',(-0.6,-24.8,8.5)); +#20853 = LINE('',#20854,#20855); +#20854 = CARTESIAN_POINT('',(-0.6,-24.8,8.5)); +#20855 = VECTOR('',#20856,1.); +#20856 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20857 = ORIENTED_EDGE('',*,*,#20858,.F.); +#20858 = EDGE_CURVE('',#20835,#20851,#20859,.T.); +#20859 = LINE('',#20860,#20861); +#20860 = CARTESIAN_POINT('',(0.6,-24.8,8.5)); +#20861 = VECTOR('',#20862,1.); +#20862 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20863 = FACE_BOUND('',#20864,.T.); +#20864 = EDGE_LOOP('',(#20865,#20875,#20883,#20891)); +#20865 = ORIENTED_EDGE('',*,*,#20866,.F.); +#20866 = EDGE_CURVE('',#20867,#20869,#20871,.T.); +#20867 = VERTEX_POINT('',#20868); +#20868 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#20869 = VERTEX_POINT('',#20870); +#20870 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#20871 = LINE('',#20872,#20873); +#20872 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#20873 = VECTOR('',#20874,1.); +#20874 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20875 = ORIENTED_EDGE('',*,*,#20876,.F.); +#20876 = EDGE_CURVE('',#20877,#20867,#20879,.T.); +#20877 = VERTEX_POINT('',#20878); +#20878 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#20879 = LINE('',#20880,#20881); +#20880 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#20881 = VECTOR('',#20882,1.); +#20882 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20883 = ORIENTED_EDGE('',*,*,#20884,.F.); +#20884 = EDGE_CURVE('',#20885,#20877,#20887,.T.); +#20885 = VERTEX_POINT('',#20886); +#20886 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#20887 = LINE('',#20888,#20889); +#20888 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#20889 = VECTOR('',#20890,1.); +#20890 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20891 = ORIENTED_EDGE('',*,*,#20892,.F.); +#20892 = EDGE_CURVE('',#20869,#20885,#20893,.T.); +#20893 = LINE('',#20894,#20895); +#20894 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#20895 = VECTOR('',#20896,1.); +#20896 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20897 = FACE_BOUND('',#20898,.T.); +#20898 = EDGE_LOOP('',(#20899,#20909,#20917,#20925)); +#20899 = ORIENTED_EDGE('',*,*,#20900,.F.); +#20900 = EDGE_CURVE('',#20901,#20903,#20905,.T.); +#20901 = VERTEX_POINT('',#20902); +#20902 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#20903 = VERTEX_POINT('',#20904); +#20904 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#20905 = LINE('',#20906,#20907); +#20906 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#20907 = VECTOR('',#20908,1.); +#20908 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20909 = ORIENTED_EDGE('',*,*,#20910,.F.); +#20910 = EDGE_CURVE('',#20911,#20901,#20913,.T.); +#20911 = VERTEX_POINT('',#20912); +#20912 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#20913 = LINE('',#20914,#20915); +#20914 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#20915 = VECTOR('',#20916,1.); +#20916 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20917 = ORIENTED_EDGE('',*,*,#20918,.F.); +#20918 = EDGE_CURVE('',#20919,#20911,#20921,.T.); +#20919 = VERTEX_POINT('',#20920); +#20920 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#20921 = LINE('',#20922,#20923); +#20922 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#20923 = VECTOR('',#20924,1.); +#20924 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20925 = ORIENTED_EDGE('',*,*,#20926,.F.); +#20926 = EDGE_CURVE('',#20903,#20919,#20927,.T.); +#20927 = LINE('',#20928,#20929); +#20928 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#20929 = VECTOR('',#20930,1.); +#20930 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20931 = FACE_BOUND('',#20932,.T.); +#20932 = EDGE_LOOP('',(#20933,#20943,#20951,#20959)); +#20933 = ORIENTED_EDGE('',*,*,#20934,.F.); +#20934 = EDGE_CURVE('',#20935,#20937,#20939,.T.); +#20935 = VERTEX_POINT('',#20936); +#20936 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#20937 = VERTEX_POINT('',#20938); +#20938 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#20939 = LINE('',#20940,#20941); +#20940 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#20941 = VECTOR('',#20942,1.); +#20942 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20943 = ORIENTED_EDGE('',*,*,#20944,.F.); +#20944 = EDGE_CURVE('',#20945,#20935,#20947,.T.); +#20945 = VERTEX_POINT('',#20946); +#20946 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#20947 = LINE('',#20948,#20949); +#20948 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#20949 = VECTOR('',#20950,1.); +#20950 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20951 = ORIENTED_EDGE('',*,*,#20952,.F.); +#20952 = EDGE_CURVE('',#20953,#20945,#20955,.T.); +#20953 = VERTEX_POINT('',#20954); +#20954 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#20955 = LINE('',#20956,#20957); +#20956 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#20957 = VECTOR('',#20958,1.); +#20958 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20959 = ORIENTED_EDGE('',*,*,#20960,.F.); +#20960 = EDGE_CURVE('',#20937,#20953,#20961,.T.); +#20961 = LINE('',#20962,#20963); +#20962 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#20963 = VECTOR('',#20964,1.); +#20964 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20965 = FACE_BOUND('',#20966,.T.); +#20966 = EDGE_LOOP('',(#20967,#20977,#20985,#20993)); +#20967 = ORIENTED_EDGE('',*,*,#20968,.F.); +#20968 = EDGE_CURVE('',#20969,#20971,#20973,.T.); +#20969 = VERTEX_POINT('',#20970); +#20970 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#20971 = VERTEX_POINT('',#20972); +#20972 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#20973 = LINE('',#20974,#20975); +#20974 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#20975 = VECTOR('',#20976,1.); +#20976 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#20977 = ORIENTED_EDGE('',*,*,#20978,.F.); +#20978 = EDGE_CURVE('',#20979,#20969,#20981,.T.); +#20979 = VERTEX_POINT('',#20980); +#20980 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#20981 = LINE('',#20982,#20983); +#20982 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#20983 = VECTOR('',#20984,1.); +#20984 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#20985 = ORIENTED_EDGE('',*,*,#20986,.F.); +#20986 = EDGE_CURVE('',#20987,#20979,#20989,.T.); +#20987 = VERTEX_POINT('',#20988); +#20988 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#20989 = LINE('',#20990,#20991); +#20990 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#20991 = VECTOR('',#20992,1.); +#20992 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#20993 = ORIENTED_EDGE('',*,*,#20994,.F.); +#20994 = EDGE_CURVE('',#20971,#20987,#20995,.T.); +#20995 = LINE('',#20996,#20997); +#20996 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#20997 = VECTOR('',#20998,1.); +#20998 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#20999 = FACE_BOUND('',#21000,.T.); +#21000 = EDGE_LOOP('',(#21001,#21011,#21019,#21027)); +#21001 = ORIENTED_EDGE('',*,*,#21002,.F.); +#21002 = EDGE_CURVE('',#21003,#21005,#21007,.T.); +#21003 = VERTEX_POINT('',#21004); +#21004 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#21005 = VERTEX_POINT('',#21006); +#21006 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#21007 = LINE('',#21008,#21009); +#21008 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#21009 = VECTOR('',#21010,1.); +#21010 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21011 = ORIENTED_EDGE('',*,*,#21012,.F.); +#21012 = EDGE_CURVE('',#21013,#21003,#21015,.T.); +#21013 = VERTEX_POINT('',#21014); +#21014 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#21015 = LINE('',#21016,#21017); +#21016 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#21017 = VECTOR('',#21018,1.); +#21018 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21019 = ORIENTED_EDGE('',*,*,#21020,.F.); +#21020 = EDGE_CURVE('',#21021,#21013,#21023,.T.); +#21021 = VERTEX_POINT('',#21022); +#21022 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#21023 = LINE('',#21024,#21025); +#21024 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#21025 = VECTOR('',#21026,1.); +#21026 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21027 = ORIENTED_EDGE('',*,*,#21028,.F.); +#21028 = EDGE_CURVE('',#21005,#21021,#21029,.T.); +#21029 = LINE('',#21030,#21031); +#21030 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#21031 = VECTOR('',#21032,1.); +#21032 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21033 = FACE_BOUND('',#21034,.T.); +#21034 = EDGE_LOOP('',(#21035,#21045,#21053,#21061)); +#21035 = ORIENTED_EDGE('',*,*,#21036,.F.); +#21036 = EDGE_CURVE('',#21037,#21039,#21041,.T.); +#21037 = VERTEX_POINT('',#21038); +#21038 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#21039 = VERTEX_POINT('',#21040); +#21040 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#21041 = LINE('',#21042,#21043); +#21042 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#21043 = VECTOR('',#21044,1.); +#21044 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21045 = ORIENTED_EDGE('',*,*,#21046,.F.); +#21046 = EDGE_CURVE('',#21047,#21037,#21049,.T.); +#21047 = VERTEX_POINT('',#21048); +#21048 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#21049 = LINE('',#21050,#21051); +#21050 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#21051 = VECTOR('',#21052,1.); +#21052 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21053 = ORIENTED_EDGE('',*,*,#21054,.F.); +#21054 = EDGE_CURVE('',#21055,#21047,#21057,.T.); +#21055 = VERTEX_POINT('',#21056); +#21056 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#21057 = LINE('',#21058,#21059); +#21058 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#21059 = VECTOR('',#21060,1.); +#21060 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21061 = ORIENTED_EDGE('',*,*,#21062,.F.); +#21062 = EDGE_CURVE('',#21039,#21055,#21063,.T.); +#21063 = LINE('',#21064,#21065); +#21064 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#21065 = VECTOR('',#21066,1.); +#21066 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21067 = FACE_BOUND('',#21068,.T.); +#21068 = EDGE_LOOP('',(#21069,#21079,#21087,#21095)); +#21069 = ORIENTED_EDGE('',*,*,#21070,.F.); +#21070 = EDGE_CURVE('',#21071,#21073,#21075,.T.); +#21071 = VERTEX_POINT('',#21072); +#21072 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#21073 = VERTEX_POINT('',#21074); +#21074 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#21075 = LINE('',#21076,#21077); +#21076 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#21077 = VECTOR('',#21078,1.); +#21078 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21079 = ORIENTED_EDGE('',*,*,#21080,.F.); +#21080 = EDGE_CURVE('',#21081,#21071,#21083,.T.); +#21081 = VERTEX_POINT('',#21082); +#21082 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#21083 = LINE('',#21084,#21085); +#21084 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#21085 = VECTOR('',#21086,1.); +#21086 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21087 = ORIENTED_EDGE('',*,*,#21088,.F.); +#21088 = EDGE_CURVE('',#21089,#21081,#21091,.T.); +#21089 = VERTEX_POINT('',#21090); +#21090 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#21091 = LINE('',#21092,#21093); +#21092 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#21093 = VECTOR('',#21094,1.); +#21094 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21095 = ORIENTED_EDGE('',*,*,#21096,.F.); +#21096 = EDGE_CURVE('',#21073,#21089,#21097,.T.); +#21097 = LINE('',#21098,#21099); +#21098 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#21099 = VECTOR('',#21100,1.); +#21100 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21101 = FACE_BOUND('',#21102,.T.); +#21102 = EDGE_LOOP('',(#21103,#21113,#21121,#21129)); +#21103 = ORIENTED_EDGE('',*,*,#21104,.F.); +#21104 = EDGE_CURVE('',#21105,#21107,#21109,.T.); +#21105 = VERTEX_POINT('',#21106); +#21106 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#21107 = VERTEX_POINT('',#21108); +#21108 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#21109 = LINE('',#21110,#21111); +#21110 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#21111 = VECTOR('',#21112,1.); +#21112 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21113 = ORIENTED_EDGE('',*,*,#21114,.F.); +#21114 = EDGE_CURVE('',#21115,#21105,#21117,.T.); +#21115 = VERTEX_POINT('',#21116); +#21116 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#21117 = LINE('',#21118,#21119); +#21118 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#21119 = VECTOR('',#21120,1.); +#21120 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21121 = ORIENTED_EDGE('',*,*,#21122,.F.); +#21122 = EDGE_CURVE('',#21123,#21115,#21125,.T.); +#21123 = VERTEX_POINT('',#21124); +#21124 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#21125 = LINE('',#21126,#21127); +#21126 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#21127 = VECTOR('',#21128,1.); +#21128 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21129 = ORIENTED_EDGE('',*,*,#21130,.F.); +#21130 = EDGE_CURVE('',#21107,#21123,#21131,.T.); +#21131 = LINE('',#21132,#21133); +#21132 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#21133 = VECTOR('',#21134,1.); +#21134 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21135 = FACE_BOUND('',#21136,.T.); +#21136 = EDGE_LOOP('',(#21137,#21147,#21155,#21163)); +#21137 = ORIENTED_EDGE('',*,*,#21138,.F.); +#21138 = EDGE_CURVE('',#21139,#21141,#21143,.T.); +#21139 = VERTEX_POINT('',#21140); +#21140 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#21141 = VERTEX_POINT('',#21142); +#21142 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#21143 = LINE('',#21144,#21145); +#21144 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#21145 = VECTOR('',#21146,1.); +#21146 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21147 = ORIENTED_EDGE('',*,*,#21148,.F.); +#21148 = EDGE_CURVE('',#21149,#21139,#21151,.T.); +#21149 = VERTEX_POINT('',#21150); +#21150 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#21151 = LINE('',#21152,#21153); +#21152 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#21153 = VECTOR('',#21154,1.); +#21154 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21155 = ORIENTED_EDGE('',*,*,#21156,.F.); +#21156 = EDGE_CURVE('',#21157,#21149,#21159,.T.); +#21157 = VERTEX_POINT('',#21158); +#21158 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#21159 = LINE('',#21160,#21161); +#21160 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#21161 = VECTOR('',#21162,1.); +#21162 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21163 = ORIENTED_EDGE('',*,*,#21164,.F.); +#21164 = EDGE_CURVE('',#21141,#21157,#21165,.T.); +#21165 = LINE('',#21166,#21167); +#21166 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#21167 = VECTOR('',#21168,1.); +#21168 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21169 = FACE_BOUND('',#21170,.T.); +#21170 = EDGE_LOOP('',(#21171,#21181,#21189,#21197)); +#21171 = ORIENTED_EDGE('',*,*,#21172,.F.); +#21172 = EDGE_CURVE('',#21173,#21175,#21177,.T.); +#21173 = VERTEX_POINT('',#21174); +#21174 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#21175 = VERTEX_POINT('',#21176); +#21176 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#21177 = LINE('',#21178,#21179); +#21178 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#21179 = VECTOR('',#21180,1.); +#21180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21181 = ORIENTED_EDGE('',*,*,#21182,.F.); +#21182 = EDGE_CURVE('',#21183,#21173,#21185,.T.); +#21183 = VERTEX_POINT('',#21184); +#21184 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#21185 = LINE('',#21186,#21187); +#21186 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#21187 = VECTOR('',#21188,1.); +#21188 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21189 = ORIENTED_EDGE('',*,*,#21190,.F.); +#21190 = EDGE_CURVE('',#21191,#21183,#21193,.T.); +#21191 = VERTEX_POINT('',#21192); +#21192 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#21193 = LINE('',#21194,#21195); +#21194 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#21195 = VECTOR('',#21196,1.); +#21196 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21197 = ORIENTED_EDGE('',*,*,#21198,.F.); +#21198 = EDGE_CURVE('',#21175,#21191,#21199,.T.); +#21199 = LINE('',#21200,#21201); +#21200 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#21201 = VECTOR('',#21202,1.); +#21202 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#21203 = PLANE('',#21204); +#21204 = AXIS2_PLACEMENT_3D('',#21205,#21206,#21207); +#21205 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,8.5)); +#21206 = DIRECTION('',(0.,0.,1.)); +#21207 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#21208 = ADVANCED_FACE('',(#21209),#21225,.F.); +#21209 = FACE_BOUND('',#21210,.F.); +#21210 = EDGE_LOOP('',(#21211,#21212,#21218,#21219)); +#21211 = ORIENTED_EDGE('',*,*,#20372,.T.); +#21212 = ORIENTED_EDGE('',*,*,#21213,.F.); +#21213 = EDGE_CURVE('',#20461,#20375,#21214,.T.); +#21214 = LINE('',#21215,#21216); +#21215 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#21216 = VECTOR('',#21217,1.); +#21217 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21218 = ORIENTED_EDGE('',*,*,#20460,.T.); +#21219 = ORIENTED_EDGE('',*,*,#21220,.T.); +#21220 = EDGE_CURVE('',#20453,#20373,#21221,.T.); +#21221 = LINE('',#21222,#21223); +#21222 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#21223 = VECTOR('',#21224,1.); +#21224 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21225 = PLANE('',#21226); +#21226 = AXIS2_PLACEMENT_3D('',#21227,#21228,#21229); +#21227 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,0.)); +#21228 = DIRECTION('',(0.,0.,1.)); +#21229 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#21230 = ADVANCED_FACE('',(#21231),#21242,.T.); +#21231 = FACE_BOUND('',#21232,.T.); +#21232 = EDGE_LOOP('',(#21233,#21234,#21240,#21241)); +#21233 = ORIENTED_EDGE('',*,*,#20468,.T.); +#21234 = ORIENTED_EDGE('',*,*,#21235,.T.); +#21235 = EDGE_CURVE('',#20469,#20414,#21236,.T.); +#21236 = LINE('',#21237,#21238); +#21237 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#21238 = VECTOR('',#21239,1.); +#21239 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21240 = ORIENTED_EDGE('',*,*,#20421,.F.); +#21241 = ORIENTED_EDGE('',*,*,#21213,.F.); +#21242 = PLANE('',#21243); +#21243 = AXIS2_PLACEMENT_3D('',#21244,#21245,#21246); +#21244 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#21245 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21247 = ADVANCED_FACE('',(#21248,#21259,#21325,#21391,#21457,#21523, + #21589,#21655,#21721,#21787,#21853,#21919,#21985,#22051,#22117, + #22183,#22249,#22315,#22381,#22447,#22513),#22579,.F.); +#21248 = FACE_BOUND('',#21249,.F.); +#21249 = EDGE_LOOP('',(#21250,#21256,#21257,#21258)); +#21250 = ORIENTED_EDGE('',*,*,#21251,.T.); +#21251 = EDGE_CURVE('',#20406,#20477,#21252,.T.); +#21252 = LINE('',#21253,#21254); +#21253 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.2)); +#21254 = VECTOR('',#21255,1.); +#21255 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21256 = ORIENTED_EDGE('',*,*,#20476,.T.); +#21257 = ORIENTED_EDGE('',*,*,#21235,.T.); +#21258 = ORIENTED_EDGE('',*,*,#20413,.T.); +#21259 = FACE_BOUND('',#21260,.F.); +#21260 = EDGE_LOOP('',(#21261,#21271,#21279,#21287,#21295,#21303,#21311, + #21319)); +#21261 = ORIENTED_EDGE('',*,*,#21262,.F.); +#21262 = EDGE_CURVE('',#21263,#21265,#21267,.T.); +#21263 = VERTEX_POINT('',#21264); +#21264 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21265 = VERTEX_POINT('',#21266); +#21266 = CARTESIAN_POINT('',(9.999999999999E-02,-48.71,0.2)); +#21267 = LINE('',#21268,#21269); +#21268 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21269 = VECTOR('',#21270,1.); +#21270 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21271 = ORIENTED_EDGE('',*,*,#21272,.T.); +#21272 = EDGE_CURVE('',#21263,#21273,#21275,.T.); +#21273 = VERTEX_POINT('',#21274); +#21274 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#21275 = LINE('',#21276,#21277); +#21276 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21277 = VECTOR('',#21278,1.); +#21278 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21279 = ORIENTED_EDGE('',*,*,#21280,.F.); +#21280 = EDGE_CURVE('',#21281,#21273,#21283,.T.); +#21281 = VERTEX_POINT('',#21282); +#21282 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#21283 = LINE('',#21284,#21285); +#21284 = CARTESIAN_POINT('',(-0.1,-36.195,0.2)); +#21285 = VECTOR('',#21286,1.); +#21286 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21287 = ORIENTED_EDGE('',*,*,#21288,.T.); +#21288 = EDGE_CURVE('',#21281,#21289,#21291,.T.); +#21289 = VERTEX_POINT('',#21290); +#21290 = CARTESIAN_POINT('',(-0.1,-47.81,0.2)); +#21291 = LINE('',#21292,#21293); +#21292 = CARTESIAN_POINT('',(-0.1,-48.71,0.2)); +#21293 = VECTOR('',#21294,1.); +#21294 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21295 = ORIENTED_EDGE('',*,*,#21296,.T.); +#21296 = EDGE_CURVE('',#21289,#21297,#21299,.T.); +#21297 = VERTEX_POINT('',#21298); +#21298 = CARTESIAN_POINT('',(9.999999999999E-02,-47.81,0.2)); +#21299 = LINE('',#21300,#21301); +#21300 = CARTESIAN_POINT('',(-0.1,-47.81,0.2)); +#21301 = VECTOR('',#21302,1.); +#21302 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21303 = ORIENTED_EDGE('',*,*,#21304,.T.); +#21304 = EDGE_CURVE('',#21297,#21305,#21307,.T.); +#21305 = VERTEX_POINT('',#21306); +#21306 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,0.2)); +#21307 = LINE('',#21308,#21309); +#21308 = CARTESIAN_POINT('',(9.999999999999E-02,-47.81,0.2)); +#21309 = VECTOR('',#21310,1.); +#21310 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21311 = ORIENTED_EDGE('',*,*,#21312,.T.); +#21312 = EDGE_CURVE('',#21305,#21313,#21315,.T.); +#21313 = VERTEX_POINT('',#21314); +#21314 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,0.2)); +#21315 = LINE('',#21316,#21317); +#21316 = CARTESIAN_POINT('',(0.1,-36.195,0.2)); +#21317 = VECTOR('',#21318,1.); +#21318 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21319 = ORIENTED_EDGE('',*,*,#21320,.T.); +#21320 = EDGE_CURVE('',#21313,#21265,#21321,.T.); +#21321 = LINE('',#21322,#21323); +#21322 = CARTESIAN_POINT('',(9.999999999999E-02,-47.81,0.2)); +#21323 = VECTOR('',#21324,1.); +#21324 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21325 = FACE_BOUND('',#21326,.F.); +#21326 = EDGE_LOOP('',(#21327,#21337,#21345,#21353,#21361,#21369,#21377, + #21385)); +#21327 = ORIENTED_EDGE('',*,*,#21328,.F.); +#21328 = EDGE_CURVE('',#21329,#21331,#21333,.T.); +#21329 = VERTEX_POINT('',#21330); +#21330 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21331 = VERTEX_POINT('',#21332); +#21332 = CARTESIAN_POINT('',(9.999999999999E-02,-46.17,0.2)); +#21333 = LINE('',#21334,#21335); +#21334 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21335 = VECTOR('',#21336,1.); +#21336 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21337 = ORIENTED_EDGE('',*,*,#21338,.T.); +#21338 = EDGE_CURVE('',#21329,#21339,#21341,.T.); +#21339 = VERTEX_POINT('',#21340); +#21340 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#21341 = LINE('',#21342,#21343); +#21342 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21343 = VECTOR('',#21344,1.); +#21344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21345 = ORIENTED_EDGE('',*,*,#21346,.F.); +#21346 = EDGE_CURVE('',#21347,#21339,#21349,.T.); +#21347 = VERTEX_POINT('',#21348); +#21348 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#21349 = LINE('',#21350,#21351); +#21350 = CARTESIAN_POINT('',(-0.1,-34.925,0.2)); +#21351 = VECTOR('',#21352,1.); +#21352 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21353 = ORIENTED_EDGE('',*,*,#21354,.T.); +#21354 = EDGE_CURVE('',#21347,#21355,#21357,.T.); +#21355 = VERTEX_POINT('',#21356); +#21356 = CARTESIAN_POINT('',(-0.1,-45.27,0.2)); +#21357 = LINE('',#21358,#21359); +#21358 = CARTESIAN_POINT('',(-0.1,-46.17,0.2)); +#21359 = VECTOR('',#21360,1.); +#21360 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21361 = ORIENTED_EDGE('',*,*,#21362,.T.); +#21362 = EDGE_CURVE('',#21355,#21363,#21365,.T.); +#21363 = VERTEX_POINT('',#21364); +#21364 = CARTESIAN_POINT('',(0.1,-45.27,0.2)); +#21365 = LINE('',#21366,#21367); +#21366 = CARTESIAN_POINT('',(-0.1,-45.27,0.2)); +#21367 = VECTOR('',#21368,1.); +#21368 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21369 = ORIENTED_EDGE('',*,*,#21370,.T.); +#21370 = EDGE_CURVE('',#21363,#21371,#21373,.T.); +#21371 = VERTEX_POINT('',#21372); +#21372 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,0.2)); +#21373 = LINE('',#21374,#21375); +#21374 = CARTESIAN_POINT('',(0.1,-45.27,0.2)); +#21375 = VECTOR('',#21376,1.); +#21376 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21377 = ORIENTED_EDGE('',*,*,#21378,.T.); +#21378 = EDGE_CURVE('',#21371,#21379,#21381,.T.); +#21379 = VERTEX_POINT('',#21380); +#21380 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,0.2)); +#21381 = LINE('',#21382,#21383); +#21382 = CARTESIAN_POINT('',(0.1,-34.925,0.2)); +#21383 = VECTOR('',#21384,1.); +#21384 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21385 = ORIENTED_EDGE('',*,*,#21386,.T.); +#21386 = EDGE_CURVE('',#21379,#21331,#21387,.T.); +#21387 = LINE('',#21388,#21389); +#21388 = CARTESIAN_POINT('',(0.1,-45.27,0.2)); +#21389 = VECTOR('',#21390,1.); +#21390 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21391 = FACE_BOUND('',#21392,.F.); +#21392 = EDGE_LOOP('',(#21393,#21403,#21411,#21419,#21427,#21435,#21443, + #21451)); +#21393 = ORIENTED_EDGE('',*,*,#21394,.F.); +#21394 = EDGE_CURVE('',#21395,#21397,#21399,.T.); +#21395 = VERTEX_POINT('',#21396); +#21396 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21397 = VERTEX_POINT('',#21398); +#21398 = CARTESIAN_POINT('',(0.1,-43.63,0.2)); +#21399 = LINE('',#21400,#21401); +#21400 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21401 = VECTOR('',#21402,1.); +#21402 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21403 = ORIENTED_EDGE('',*,*,#21404,.T.); +#21404 = EDGE_CURVE('',#21395,#21405,#21407,.T.); +#21405 = VERTEX_POINT('',#21406); +#21406 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#21407 = LINE('',#21408,#21409); +#21408 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21409 = VECTOR('',#21410,1.); +#21410 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21411 = ORIENTED_EDGE('',*,*,#21412,.F.); +#21412 = EDGE_CURVE('',#21413,#21405,#21415,.T.); +#21413 = VERTEX_POINT('',#21414); +#21414 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#21415 = LINE('',#21416,#21417); +#21416 = CARTESIAN_POINT('',(-0.1,-33.655,0.2)); +#21417 = VECTOR('',#21418,1.); +#21418 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21419 = ORIENTED_EDGE('',*,*,#21420,.T.); +#21420 = EDGE_CURVE('',#21413,#21421,#21423,.T.); +#21421 = VERTEX_POINT('',#21422); +#21422 = CARTESIAN_POINT('',(-0.1,-42.73,0.2)); +#21423 = LINE('',#21424,#21425); +#21424 = CARTESIAN_POINT('',(-0.1,-43.63,0.2)); +#21425 = VECTOR('',#21426,1.); +#21426 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21427 = ORIENTED_EDGE('',*,*,#21428,.T.); +#21428 = EDGE_CURVE('',#21421,#21429,#21431,.T.); +#21429 = VERTEX_POINT('',#21430); +#21430 = CARTESIAN_POINT('',(0.1,-42.73,0.2)); +#21431 = LINE('',#21432,#21433); +#21432 = CARTESIAN_POINT('',(-0.1,-42.73,0.2)); +#21433 = VECTOR('',#21434,1.); +#21434 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21435 = ORIENTED_EDGE('',*,*,#21436,.T.); +#21436 = EDGE_CURVE('',#21429,#21437,#21439,.T.); +#21437 = VERTEX_POINT('',#21438); +#21438 = CARTESIAN_POINT('',(0.1,-42.88,0.2)); +#21439 = LINE('',#21440,#21441); +#21440 = CARTESIAN_POINT('',(0.1,-42.73,0.2)); +#21441 = VECTOR('',#21442,1.); +#21442 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21443 = ORIENTED_EDGE('',*,*,#21444,.T.); +#21444 = EDGE_CURVE('',#21437,#21445,#21447,.T.); +#21445 = VERTEX_POINT('',#21446); +#21446 = CARTESIAN_POINT('',(0.1,-43.48,0.2)); +#21447 = LINE('',#21448,#21449); +#21448 = CARTESIAN_POINT('',(0.1,-33.655,0.2)); +#21449 = VECTOR('',#21450,1.); +#21450 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21451 = ORIENTED_EDGE('',*,*,#21452,.T.); +#21452 = EDGE_CURVE('',#21445,#21397,#21453,.T.); +#21453 = LINE('',#21454,#21455); +#21454 = CARTESIAN_POINT('',(0.1,-42.73,0.2)); +#21455 = VECTOR('',#21456,1.); +#21456 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21457 = FACE_BOUND('',#21458,.F.); +#21458 = EDGE_LOOP('',(#21459,#21469,#21477,#21485,#21493,#21501,#21509, + #21517)); +#21459 = ORIENTED_EDGE('',*,*,#21460,.F.); +#21460 = EDGE_CURVE('',#21461,#21463,#21465,.T.); +#21461 = VERTEX_POINT('',#21462); +#21462 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21463 = VERTEX_POINT('',#21464); +#21464 = CARTESIAN_POINT('',(0.1,-41.09,0.2)); +#21465 = LINE('',#21466,#21467); +#21466 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21467 = VECTOR('',#21468,1.); +#21468 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21469 = ORIENTED_EDGE('',*,*,#21470,.T.); +#21470 = EDGE_CURVE('',#21461,#21471,#21473,.T.); +#21471 = VERTEX_POINT('',#21472); +#21472 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#21473 = LINE('',#21474,#21475); +#21474 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21475 = VECTOR('',#21476,1.); +#21476 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21477 = ORIENTED_EDGE('',*,*,#21478,.F.); +#21478 = EDGE_CURVE('',#21479,#21471,#21481,.T.); +#21479 = VERTEX_POINT('',#21480); +#21480 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#21481 = LINE('',#21482,#21483); +#21482 = CARTESIAN_POINT('',(-0.1,-32.385,0.2)); +#21483 = VECTOR('',#21484,1.); +#21484 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21485 = ORIENTED_EDGE('',*,*,#21486,.T.); +#21486 = EDGE_CURVE('',#21479,#21487,#21489,.T.); +#21487 = VERTEX_POINT('',#21488); +#21488 = CARTESIAN_POINT('',(-0.1,-40.19,0.2)); +#21489 = LINE('',#21490,#21491); +#21490 = CARTESIAN_POINT('',(-0.1,-41.09,0.2)); +#21491 = VECTOR('',#21492,1.); +#21492 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21493 = ORIENTED_EDGE('',*,*,#21494,.T.); +#21494 = EDGE_CURVE('',#21487,#21495,#21497,.T.); +#21495 = VERTEX_POINT('',#21496); +#21496 = CARTESIAN_POINT('',(0.1,-40.19,0.2)); +#21497 = LINE('',#21498,#21499); +#21498 = CARTESIAN_POINT('',(-0.1,-40.19,0.2)); +#21499 = VECTOR('',#21500,1.); +#21500 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21501 = ORIENTED_EDGE('',*,*,#21502,.T.); +#21502 = EDGE_CURVE('',#21495,#21503,#21505,.T.); +#21503 = VERTEX_POINT('',#21504); +#21504 = CARTESIAN_POINT('',(0.1,-40.34,0.2)); +#21505 = LINE('',#21506,#21507); +#21506 = CARTESIAN_POINT('',(0.1,-40.19,0.2)); +#21507 = VECTOR('',#21508,1.); +#21508 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21509 = ORIENTED_EDGE('',*,*,#21510,.T.); +#21510 = EDGE_CURVE('',#21503,#21511,#21513,.T.); +#21511 = VERTEX_POINT('',#21512); +#21512 = CARTESIAN_POINT('',(0.1,-40.94,0.2)); +#21513 = LINE('',#21514,#21515); +#21514 = CARTESIAN_POINT('',(0.1,-32.385,0.2)); +#21515 = VECTOR('',#21516,1.); +#21516 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21517 = ORIENTED_EDGE('',*,*,#21518,.T.); +#21518 = EDGE_CURVE('',#21511,#21463,#21519,.T.); +#21519 = LINE('',#21520,#21521); +#21520 = CARTESIAN_POINT('',(0.1,-40.19,0.2)); +#21521 = VECTOR('',#21522,1.); +#21522 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21523 = FACE_BOUND('',#21524,.F.); +#21524 = EDGE_LOOP('',(#21525,#21535,#21543,#21551,#21559,#21567,#21575, + #21583)); +#21525 = ORIENTED_EDGE('',*,*,#21526,.F.); +#21526 = EDGE_CURVE('',#21527,#21529,#21531,.T.); +#21527 = VERTEX_POINT('',#21528); +#21528 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21529 = VERTEX_POINT('',#21530); +#21530 = CARTESIAN_POINT('',(0.1,-38.55,0.2)); +#21531 = LINE('',#21532,#21533); +#21532 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21533 = VECTOR('',#21534,1.); +#21534 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21535 = ORIENTED_EDGE('',*,*,#21536,.T.); +#21536 = EDGE_CURVE('',#21527,#21537,#21539,.T.); +#21537 = VERTEX_POINT('',#21538); +#21538 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#21539 = LINE('',#21540,#21541); +#21540 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21541 = VECTOR('',#21542,1.); +#21542 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21543 = ORIENTED_EDGE('',*,*,#21544,.F.); +#21544 = EDGE_CURVE('',#21545,#21537,#21547,.T.); +#21545 = VERTEX_POINT('',#21546); +#21546 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#21547 = LINE('',#21548,#21549); +#21548 = CARTESIAN_POINT('',(-0.1,-31.115,0.2)); +#21549 = VECTOR('',#21550,1.); +#21550 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21551 = ORIENTED_EDGE('',*,*,#21552,.T.); +#21552 = EDGE_CURVE('',#21545,#21553,#21555,.T.); +#21553 = VERTEX_POINT('',#21554); +#21554 = CARTESIAN_POINT('',(-0.1,-37.65,0.2)); +#21555 = LINE('',#21556,#21557); +#21556 = CARTESIAN_POINT('',(-0.1,-38.55,0.2)); +#21557 = VECTOR('',#21558,1.); +#21558 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21559 = ORIENTED_EDGE('',*,*,#21560,.T.); +#21560 = EDGE_CURVE('',#21553,#21561,#21563,.T.); +#21561 = VERTEX_POINT('',#21562); +#21562 = CARTESIAN_POINT('',(0.1,-37.65,0.2)); +#21563 = LINE('',#21564,#21565); +#21564 = CARTESIAN_POINT('',(-0.1,-37.65,0.2)); +#21565 = VECTOR('',#21566,1.); +#21566 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21567 = ORIENTED_EDGE('',*,*,#21568,.T.); +#21568 = EDGE_CURVE('',#21561,#21569,#21571,.T.); +#21569 = VERTEX_POINT('',#21570); +#21570 = CARTESIAN_POINT('',(0.1,-37.8,0.2)); +#21571 = LINE('',#21572,#21573); +#21572 = CARTESIAN_POINT('',(0.1,-37.65,0.2)); +#21573 = VECTOR('',#21574,1.); +#21574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21575 = ORIENTED_EDGE('',*,*,#21576,.T.); +#21576 = EDGE_CURVE('',#21569,#21577,#21579,.T.); +#21577 = VERTEX_POINT('',#21578); +#21578 = CARTESIAN_POINT('',(0.1,-38.4,0.2)); +#21579 = LINE('',#21580,#21581); +#21580 = CARTESIAN_POINT('',(0.1,-31.115,0.2)); +#21581 = VECTOR('',#21582,1.); +#21582 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21583 = ORIENTED_EDGE('',*,*,#21584,.T.); +#21584 = EDGE_CURVE('',#21577,#21529,#21585,.T.); +#21585 = LINE('',#21586,#21587); +#21586 = CARTESIAN_POINT('',(0.1,-37.65,0.2)); +#21587 = VECTOR('',#21588,1.); +#21588 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21589 = FACE_BOUND('',#21590,.F.); +#21590 = EDGE_LOOP('',(#21591,#21601,#21609,#21617,#21625,#21633,#21641, + #21649)); +#21591 = ORIENTED_EDGE('',*,*,#21592,.F.); +#21592 = EDGE_CURVE('',#21593,#21595,#21597,.T.); +#21593 = VERTEX_POINT('',#21594); +#21594 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21595 = VERTEX_POINT('',#21596); +#21596 = CARTESIAN_POINT('',(0.1,-36.01,0.2)); +#21597 = LINE('',#21598,#21599); +#21598 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21599 = VECTOR('',#21600,1.); +#21600 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21601 = ORIENTED_EDGE('',*,*,#21602,.T.); +#21602 = EDGE_CURVE('',#21593,#21603,#21605,.T.); +#21603 = VERTEX_POINT('',#21604); +#21604 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#21605 = LINE('',#21606,#21607); +#21606 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21607 = VECTOR('',#21608,1.); +#21608 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21609 = ORIENTED_EDGE('',*,*,#21610,.F.); +#21610 = EDGE_CURVE('',#21611,#21603,#21613,.T.); +#21611 = VERTEX_POINT('',#21612); +#21612 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#21613 = LINE('',#21614,#21615); +#21614 = CARTESIAN_POINT('',(-0.1,-29.845,0.2)); +#21615 = VECTOR('',#21616,1.); +#21616 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21617 = ORIENTED_EDGE('',*,*,#21618,.T.); +#21618 = EDGE_CURVE('',#21611,#21619,#21621,.T.); +#21619 = VERTEX_POINT('',#21620); +#21620 = CARTESIAN_POINT('',(-0.1,-35.11,0.2)); +#21621 = LINE('',#21622,#21623); +#21622 = CARTESIAN_POINT('',(-0.1,-36.01,0.2)); +#21623 = VECTOR('',#21624,1.); +#21624 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21625 = ORIENTED_EDGE('',*,*,#21626,.T.); +#21626 = EDGE_CURVE('',#21619,#21627,#21629,.T.); +#21627 = VERTEX_POINT('',#21628); +#21628 = CARTESIAN_POINT('',(0.1,-35.11,0.2)); +#21629 = LINE('',#21630,#21631); +#21630 = CARTESIAN_POINT('',(-0.1,-35.11,0.2)); +#21631 = VECTOR('',#21632,1.); +#21632 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21633 = ORIENTED_EDGE('',*,*,#21634,.T.); +#21634 = EDGE_CURVE('',#21627,#21635,#21637,.T.); +#21635 = VERTEX_POINT('',#21636); +#21636 = CARTESIAN_POINT('',(0.1,-35.26,0.2)); +#21637 = LINE('',#21638,#21639); +#21638 = CARTESIAN_POINT('',(0.1,-35.11,0.2)); +#21639 = VECTOR('',#21640,1.); +#21640 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21641 = ORIENTED_EDGE('',*,*,#21642,.T.); +#21642 = EDGE_CURVE('',#21635,#21643,#21645,.T.); +#21643 = VERTEX_POINT('',#21644); +#21644 = CARTESIAN_POINT('',(0.1,-35.86,0.2)); +#21645 = LINE('',#21646,#21647); +#21646 = CARTESIAN_POINT('',(0.1,-29.845,0.2)); +#21647 = VECTOR('',#21648,1.); +#21648 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21649 = ORIENTED_EDGE('',*,*,#21650,.T.); +#21650 = EDGE_CURVE('',#21643,#21595,#21651,.T.); +#21651 = LINE('',#21652,#21653); +#21652 = CARTESIAN_POINT('',(0.1,-35.11,0.2)); +#21653 = VECTOR('',#21654,1.); +#21654 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21655 = FACE_BOUND('',#21656,.F.); +#21656 = EDGE_LOOP('',(#21657,#21667,#21675,#21683,#21691,#21699,#21707, + #21715)); +#21657 = ORIENTED_EDGE('',*,*,#21658,.F.); +#21658 = EDGE_CURVE('',#21659,#21661,#21663,.T.); +#21659 = VERTEX_POINT('',#21660); +#21660 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21661 = VERTEX_POINT('',#21662); +#21662 = CARTESIAN_POINT('',(0.1,-33.47,0.2)); +#21663 = LINE('',#21664,#21665); +#21664 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21665 = VECTOR('',#21666,1.); +#21666 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21667 = ORIENTED_EDGE('',*,*,#21668,.T.); +#21668 = EDGE_CURVE('',#21659,#21669,#21671,.T.); +#21669 = VERTEX_POINT('',#21670); +#21670 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#21671 = LINE('',#21672,#21673); +#21672 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21673 = VECTOR('',#21674,1.); +#21674 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21675 = ORIENTED_EDGE('',*,*,#21676,.F.); +#21676 = EDGE_CURVE('',#21677,#21669,#21679,.T.); +#21677 = VERTEX_POINT('',#21678); +#21678 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#21679 = LINE('',#21680,#21681); +#21680 = CARTESIAN_POINT('',(-0.1,-28.575,0.2)); +#21681 = VECTOR('',#21682,1.); +#21682 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21683 = ORIENTED_EDGE('',*,*,#21684,.T.); +#21684 = EDGE_CURVE('',#21677,#21685,#21687,.T.); +#21685 = VERTEX_POINT('',#21686); +#21686 = CARTESIAN_POINT('',(-0.1,-32.57,0.2)); +#21687 = LINE('',#21688,#21689); +#21688 = CARTESIAN_POINT('',(-0.1,-33.47,0.2)); +#21689 = VECTOR('',#21690,1.); +#21690 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21691 = ORIENTED_EDGE('',*,*,#21692,.T.); +#21692 = EDGE_CURVE('',#21685,#21693,#21695,.T.); +#21693 = VERTEX_POINT('',#21694); +#21694 = CARTESIAN_POINT('',(0.1,-32.57,0.2)); +#21695 = LINE('',#21696,#21697); +#21696 = CARTESIAN_POINT('',(-0.1,-32.57,0.2)); +#21697 = VECTOR('',#21698,1.); +#21698 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21699 = ORIENTED_EDGE('',*,*,#21700,.T.); +#21700 = EDGE_CURVE('',#21693,#21701,#21703,.T.); +#21701 = VERTEX_POINT('',#21702); +#21702 = CARTESIAN_POINT('',(0.1,-32.72,0.2)); +#21703 = LINE('',#21704,#21705); +#21704 = CARTESIAN_POINT('',(0.1,-32.57,0.2)); +#21705 = VECTOR('',#21706,1.); +#21706 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21707 = ORIENTED_EDGE('',*,*,#21708,.T.); +#21708 = EDGE_CURVE('',#21701,#21709,#21711,.T.); +#21709 = VERTEX_POINT('',#21710); +#21710 = CARTESIAN_POINT('',(0.1,-33.32,0.2)); +#21711 = LINE('',#21712,#21713); +#21712 = CARTESIAN_POINT('',(0.1,-28.575,0.2)); +#21713 = VECTOR('',#21714,1.); +#21714 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21715 = ORIENTED_EDGE('',*,*,#21716,.T.); +#21716 = EDGE_CURVE('',#21709,#21661,#21717,.T.); +#21717 = LINE('',#21718,#21719); +#21718 = CARTESIAN_POINT('',(0.1,-32.57,0.2)); +#21719 = VECTOR('',#21720,1.); +#21720 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21721 = FACE_BOUND('',#21722,.F.); +#21722 = EDGE_LOOP('',(#21723,#21733,#21741,#21749,#21757,#21765,#21773, + #21781)); +#21723 = ORIENTED_EDGE('',*,*,#21724,.F.); +#21724 = EDGE_CURVE('',#21725,#21727,#21729,.T.); +#21725 = VERTEX_POINT('',#21726); +#21726 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21727 = VERTEX_POINT('',#21728); +#21728 = CARTESIAN_POINT('',(0.1,-30.93,0.2)); +#21729 = LINE('',#21730,#21731); +#21730 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21731 = VECTOR('',#21732,1.); +#21732 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21733 = ORIENTED_EDGE('',*,*,#21734,.T.); +#21734 = EDGE_CURVE('',#21725,#21735,#21737,.T.); +#21735 = VERTEX_POINT('',#21736); +#21736 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#21737 = LINE('',#21738,#21739); +#21738 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21739 = VECTOR('',#21740,1.); +#21740 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21741 = ORIENTED_EDGE('',*,*,#21742,.F.); +#21742 = EDGE_CURVE('',#21743,#21735,#21745,.T.); +#21743 = VERTEX_POINT('',#21744); +#21744 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#21745 = LINE('',#21746,#21747); +#21746 = CARTESIAN_POINT('',(-0.1,-27.305,0.2)); +#21747 = VECTOR('',#21748,1.); +#21748 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21749 = ORIENTED_EDGE('',*,*,#21750,.T.); +#21750 = EDGE_CURVE('',#21743,#21751,#21753,.T.); +#21751 = VERTEX_POINT('',#21752); +#21752 = CARTESIAN_POINT('',(-0.1,-30.03,0.2)); +#21753 = LINE('',#21754,#21755); +#21754 = CARTESIAN_POINT('',(-0.1,-30.93,0.2)); +#21755 = VECTOR('',#21756,1.); +#21756 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21757 = ORIENTED_EDGE('',*,*,#21758,.T.); +#21758 = EDGE_CURVE('',#21751,#21759,#21761,.T.); +#21759 = VERTEX_POINT('',#21760); +#21760 = CARTESIAN_POINT('',(0.1,-30.03,0.2)); +#21761 = LINE('',#21762,#21763); +#21762 = CARTESIAN_POINT('',(-0.1,-30.03,0.2)); +#21763 = VECTOR('',#21764,1.); +#21764 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21765 = ORIENTED_EDGE('',*,*,#21766,.T.); +#21766 = EDGE_CURVE('',#21759,#21767,#21769,.T.); +#21767 = VERTEX_POINT('',#21768); +#21768 = CARTESIAN_POINT('',(0.1,-30.18,0.2)); +#21769 = LINE('',#21770,#21771); +#21770 = CARTESIAN_POINT('',(0.1,-30.03,0.2)); +#21771 = VECTOR('',#21772,1.); +#21772 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21773 = ORIENTED_EDGE('',*,*,#21774,.T.); +#21774 = EDGE_CURVE('',#21767,#21775,#21777,.T.); +#21775 = VERTEX_POINT('',#21776); +#21776 = CARTESIAN_POINT('',(0.1,-30.78,0.2)); +#21777 = LINE('',#21778,#21779); +#21778 = CARTESIAN_POINT('',(0.1,-27.305,0.2)); +#21779 = VECTOR('',#21780,1.); +#21780 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21781 = ORIENTED_EDGE('',*,*,#21782,.T.); +#21782 = EDGE_CURVE('',#21775,#21727,#21783,.T.); +#21783 = LINE('',#21784,#21785); +#21784 = CARTESIAN_POINT('',(0.1,-30.03,0.2)); +#21785 = VECTOR('',#21786,1.); +#21786 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21787 = FACE_BOUND('',#21788,.F.); +#21788 = EDGE_LOOP('',(#21789,#21799,#21807,#21815,#21823,#21831,#21839, + #21847)); +#21789 = ORIENTED_EDGE('',*,*,#21790,.F.); +#21790 = EDGE_CURVE('',#21791,#21793,#21795,.T.); +#21791 = VERTEX_POINT('',#21792); +#21792 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21793 = VERTEX_POINT('',#21794); +#21794 = CARTESIAN_POINT('',(0.1,-28.39,0.2)); +#21795 = LINE('',#21796,#21797); +#21796 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21797 = VECTOR('',#21798,1.); +#21798 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21799 = ORIENTED_EDGE('',*,*,#21800,.T.); +#21800 = EDGE_CURVE('',#21791,#21801,#21803,.T.); +#21801 = VERTEX_POINT('',#21802); +#21802 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#21803 = LINE('',#21804,#21805); +#21804 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21805 = VECTOR('',#21806,1.); +#21806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21807 = ORIENTED_EDGE('',*,*,#21808,.F.); +#21808 = EDGE_CURVE('',#21809,#21801,#21811,.T.); +#21809 = VERTEX_POINT('',#21810); +#21810 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#21811 = LINE('',#21812,#21813); +#21812 = CARTESIAN_POINT('',(-0.1,-26.035,0.2)); +#21813 = VECTOR('',#21814,1.); +#21814 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21815 = ORIENTED_EDGE('',*,*,#21816,.T.); +#21816 = EDGE_CURVE('',#21809,#21817,#21819,.T.); +#21817 = VERTEX_POINT('',#21818); +#21818 = CARTESIAN_POINT('',(-0.1,-27.49,0.2)); +#21819 = LINE('',#21820,#21821); +#21820 = CARTESIAN_POINT('',(-0.1,-28.39,0.2)); +#21821 = VECTOR('',#21822,1.); +#21822 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21823 = ORIENTED_EDGE('',*,*,#21824,.T.); +#21824 = EDGE_CURVE('',#21817,#21825,#21827,.T.); +#21825 = VERTEX_POINT('',#21826); +#21826 = CARTESIAN_POINT('',(0.1,-27.49,0.2)); +#21827 = LINE('',#21828,#21829); +#21828 = CARTESIAN_POINT('',(-0.1,-27.49,0.2)); +#21829 = VECTOR('',#21830,1.); +#21830 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21831 = ORIENTED_EDGE('',*,*,#21832,.T.); +#21832 = EDGE_CURVE('',#21825,#21833,#21835,.T.); +#21833 = VERTEX_POINT('',#21834); +#21834 = CARTESIAN_POINT('',(0.1,-27.64,0.2)); +#21835 = LINE('',#21836,#21837); +#21836 = CARTESIAN_POINT('',(0.1,-27.49,0.2)); +#21837 = VECTOR('',#21838,1.); +#21838 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21839 = ORIENTED_EDGE('',*,*,#21840,.T.); +#21840 = EDGE_CURVE('',#21833,#21841,#21843,.T.); +#21841 = VERTEX_POINT('',#21842); +#21842 = CARTESIAN_POINT('',(0.1,-28.24,0.2)); +#21843 = LINE('',#21844,#21845); +#21844 = CARTESIAN_POINT('',(0.1,-26.035,0.2)); +#21845 = VECTOR('',#21846,1.); +#21846 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21847 = ORIENTED_EDGE('',*,*,#21848,.T.); +#21848 = EDGE_CURVE('',#21841,#21793,#21849,.T.); +#21849 = LINE('',#21850,#21851); +#21850 = CARTESIAN_POINT('',(0.1,-27.49,0.2)); +#21851 = VECTOR('',#21852,1.); +#21852 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21853 = FACE_BOUND('',#21854,.F.); +#21854 = EDGE_LOOP('',(#21855,#21865,#21873,#21881,#21889,#21897,#21905, + #21913)); +#21855 = ORIENTED_EDGE('',*,*,#21856,.F.); +#21856 = EDGE_CURVE('',#21857,#21859,#21861,.T.); +#21857 = VERTEX_POINT('',#21858); +#21858 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21859 = VERTEX_POINT('',#21860); +#21860 = CARTESIAN_POINT('',(0.1,-25.85,0.2)); +#21861 = LINE('',#21862,#21863); +#21862 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21863 = VECTOR('',#21864,1.); +#21864 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21865 = ORIENTED_EDGE('',*,*,#21866,.T.); +#21866 = EDGE_CURVE('',#21857,#21867,#21869,.T.); +#21867 = VERTEX_POINT('',#21868); +#21868 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#21869 = LINE('',#21870,#21871); +#21870 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21871 = VECTOR('',#21872,1.); +#21872 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21873 = ORIENTED_EDGE('',*,*,#21874,.F.); +#21874 = EDGE_CURVE('',#21875,#21867,#21877,.T.); +#21875 = VERTEX_POINT('',#21876); +#21876 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#21877 = LINE('',#21878,#21879); +#21878 = CARTESIAN_POINT('',(-0.1,-24.765,0.2)); +#21879 = VECTOR('',#21880,1.); +#21880 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21881 = ORIENTED_EDGE('',*,*,#21882,.T.); +#21882 = EDGE_CURVE('',#21875,#21883,#21885,.T.); +#21883 = VERTEX_POINT('',#21884); +#21884 = CARTESIAN_POINT('',(-0.1,-24.95,0.2)); +#21885 = LINE('',#21886,#21887); +#21886 = CARTESIAN_POINT('',(-0.1,-25.85,0.2)); +#21887 = VECTOR('',#21888,1.); +#21888 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21889 = ORIENTED_EDGE('',*,*,#21890,.T.); +#21890 = EDGE_CURVE('',#21883,#21891,#21893,.T.); +#21891 = VERTEX_POINT('',#21892); +#21892 = CARTESIAN_POINT('',(0.1,-24.95,0.2)); +#21893 = LINE('',#21894,#21895); +#21894 = CARTESIAN_POINT('',(-0.1,-24.95,0.2)); +#21895 = VECTOR('',#21896,1.); +#21896 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21897 = ORIENTED_EDGE('',*,*,#21898,.T.); +#21898 = EDGE_CURVE('',#21891,#21899,#21901,.T.); +#21899 = VERTEX_POINT('',#21900); +#21900 = CARTESIAN_POINT('',(0.1,-25.1,0.2)); +#21901 = LINE('',#21902,#21903); +#21902 = CARTESIAN_POINT('',(0.1,-24.95,0.2)); +#21903 = VECTOR('',#21904,1.); +#21904 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21905 = ORIENTED_EDGE('',*,*,#21906,.T.); +#21906 = EDGE_CURVE('',#21899,#21907,#21909,.T.); +#21907 = VERTEX_POINT('',#21908); +#21908 = CARTESIAN_POINT('',(0.1,-25.7,0.2)); +#21909 = LINE('',#21910,#21911); +#21910 = CARTESIAN_POINT('',(0.1,-24.765,0.2)); +#21911 = VECTOR('',#21912,1.); +#21912 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21913 = ORIENTED_EDGE('',*,*,#21914,.T.); +#21914 = EDGE_CURVE('',#21907,#21859,#21915,.T.); +#21915 = LINE('',#21916,#21917); +#21916 = CARTESIAN_POINT('',(0.1,-24.95,0.2)); +#21917 = VECTOR('',#21918,1.); +#21918 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21919 = FACE_BOUND('',#21920,.F.); +#21920 = EDGE_LOOP('',(#21921,#21931,#21939,#21947,#21955,#21963,#21971, + #21979)); +#21921 = ORIENTED_EDGE('',*,*,#21922,.F.); +#21922 = EDGE_CURVE('',#21923,#21925,#21927,.T.); +#21923 = VERTEX_POINT('',#21924); +#21924 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21925 = VERTEX_POINT('',#21926); +#21926 = CARTESIAN_POINT('',(0.1,-23.31,0.2)); +#21927 = LINE('',#21928,#21929); +#21928 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21929 = VECTOR('',#21930,1.); +#21930 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21931 = ORIENTED_EDGE('',*,*,#21932,.T.); +#21932 = EDGE_CURVE('',#21923,#21933,#21935,.T.); +#21933 = VERTEX_POINT('',#21934); +#21934 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#21935 = LINE('',#21936,#21937); +#21936 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21937 = VECTOR('',#21938,1.); +#21938 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21939 = ORIENTED_EDGE('',*,*,#21940,.F.); +#21940 = EDGE_CURVE('',#21941,#21933,#21943,.T.); +#21941 = VERTEX_POINT('',#21942); +#21942 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#21943 = LINE('',#21944,#21945); +#21944 = CARTESIAN_POINT('',(-0.1,-23.495,0.2)); +#21945 = VECTOR('',#21946,1.); +#21946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21947 = ORIENTED_EDGE('',*,*,#21948,.T.); +#21948 = EDGE_CURVE('',#21941,#21949,#21951,.T.); +#21949 = VERTEX_POINT('',#21950); +#21950 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#21951 = LINE('',#21952,#21953); +#21952 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#21953 = VECTOR('',#21954,1.); +#21954 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#21955 = ORIENTED_EDGE('',*,*,#21956,.T.); +#21956 = EDGE_CURVE('',#21949,#21957,#21959,.T.); +#21957 = VERTEX_POINT('',#21958); +#21958 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#21959 = LINE('',#21960,#21961); +#21960 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#21961 = VECTOR('',#21962,1.); +#21962 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21963 = ORIENTED_EDGE('',*,*,#21964,.T.); +#21964 = EDGE_CURVE('',#21957,#21965,#21967,.T.); +#21965 = VERTEX_POINT('',#21966); +#21966 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#21967 = LINE('',#21968,#21969); +#21968 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#21969 = VECTOR('',#21970,1.); +#21970 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21971 = ORIENTED_EDGE('',*,*,#21972,.T.); +#21972 = EDGE_CURVE('',#21965,#21973,#21975,.T.); +#21973 = VERTEX_POINT('',#21974); +#21974 = CARTESIAN_POINT('',(0.1,-23.16,0.2)); +#21975 = LINE('',#21976,#21977); +#21976 = CARTESIAN_POINT('',(0.1,-23.495,0.2)); +#21977 = VECTOR('',#21978,1.); +#21978 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21979 = ORIENTED_EDGE('',*,*,#21980,.T.); +#21980 = EDGE_CURVE('',#21973,#21925,#21981,.T.); +#21981 = LINE('',#21982,#21983); +#21982 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#21983 = VECTOR('',#21984,1.); +#21984 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#21985 = FACE_BOUND('',#21986,.F.); +#21986 = EDGE_LOOP('',(#21987,#21997,#22005,#22013,#22021,#22029,#22037, + #22045)); +#21987 = ORIENTED_EDGE('',*,*,#21988,.F.); +#21988 = EDGE_CURVE('',#21989,#21991,#21993,.T.); +#21989 = VERTEX_POINT('',#21990); +#21990 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#21991 = VERTEX_POINT('',#21992); +#21992 = CARTESIAN_POINT('',(0.1,-20.77,0.2)); +#21993 = LINE('',#21994,#21995); +#21994 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#21995 = VECTOR('',#21996,1.); +#21996 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#21997 = ORIENTED_EDGE('',*,*,#21998,.T.); +#21998 = EDGE_CURVE('',#21989,#21999,#22001,.T.); +#21999 = VERTEX_POINT('',#22000); +#22000 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#22001 = LINE('',#22002,#22003); +#22002 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#22003 = VECTOR('',#22004,1.); +#22004 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22005 = ORIENTED_EDGE('',*,*,#22006,.F.); +#22006 = EDGE_CURVE('',#22007,#21999,#22009,.T.); +#22007 = VERTEX_POINT('',#22008); +#22008 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#22009 = LINE('',#22010,#22011); +#22010 = CARTESIAN_POINT('',(-0.1,-22.225,0.2)); +#22011 = VECTOR('',#22012,1.); +#22012 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22013 = ORIENTED_EDGE('',*,*,#22014,.T.); +#22014 = EDGE_CURVE('',#22007,#22015,#22017,.T.); +#22015 = VERTEX_POINT('',#22016); +#22016 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#22017 = LINE('',#22018,#22019); +#22018 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#22019 = VECTOR('',#22020,1.); +#22020 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22021 = ORIENTED_EDGE('',*,*,#22022,.T.); +#22022 = EDGE_CURVE('',#22015,#22023,#22025,.T.); +#22023 = VERTEX_POINT('',#22024); +#22024 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#22025 = LINE('',#22026,#22027); +#22026 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#22027 = VECTOR('',#22028,1.); +#22028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22029 = ORIENTED_EDGE('',*,*,#22030,.T.); +#22030 = EDGE_CURVE('',#22023,#22031,#22033,.T.); +#22031 = VERTEX_POINT('',#22032); +#22032 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#22033 = LINE('',#22034,#22035); +#22034 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#22035 = VECTOR('',#22036,1.); +#22036 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22037 = ORIENTED_EDGE('',*,*,#22038,.T.); +#22038 = EDGE_CURVE('',#22031,#22039,#22041,.T.); +#22039 = VERTEX_POINT('',#22040); +#22040 = CARTESIAN_POINT('',(0.1,-20.62,0.2)); +#22041 = LINE('',#22042,#22043); +#22042 = CARTESIAN_POINT('',(0.1,-22.225,0.2)); +#22043 = VECTOR('',#22044,1.); +#22044 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22045 = ORIENTED_EDGE('',*,*,#22046,.T.); +#22046 = EDGE_CURVE('',#22039,#21991,#22047,.T.); +#22047 = LINE('',#22048,#22049); +#22048 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#22049 = VECTOR('',#22050,1.); +#22050 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22051 = FACE_BOUND('',#22052,.F.); +#22052 = EDGE_LOOP('',(#22053,#22063,#22071,#22079,#22087,#22095,#22103, + #22111)); +#22053 = ORIENTED_EDGE('',*,*,#22054,.F.); +#22054 = EDGE_CURVE('',#22055,#22057,#22059,.T.); +#22055 = VERTEX_POINT('',#22056); +#22056 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22057 = VERTEX_POINT('',#22058); +#22058 = CARTESIAN_POINT('',(0.1,-18.23,0.2)); +#22059 = LINE('',#22060,#22061); +#22060 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22061 = VECTOR('',#22062,1.); +#22062 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22063 = ORIENTED_EDGE('',*,*,#22064,.T.); +#22064 = EDGE_CURVE('',#22055,#22065,#22067,.T.); +#22065 = VERTEX_POINT('',#22066); +#22066 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#22067 = LINE('',#22068,#22069); +#22068 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22069 = VECTOR('',#22070,1.); +#22070 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22071 = ORIENTED_EDGE('',*,*,#22072,.F.); +#22072 = EDGE_CURVE('',#22073,#22065,#22075,.T.); +#22073 = VERTEX_POINT('',#22074); +#22074 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#22075 = LINE('',#22076,#22077); +#22076 = CARTESIAN_POINT('',(-0.1,-20.955,0.2)); +#22077 = VECTOR('',#22078,1.); +#22078 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22079 = ORIENTED_EDGE('',*,*,#22080,.T.); +#22080 = EDGE_CURVE('',#22073,#22081,#22083,.T.); +#22081 = VERTEX_POINT('',#22082); +#22082 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#22083 = LINE('',#22084,#22085); +#22084 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#22085 = VECTOR('',#22086,1.); +#22086 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22087 = ORIENTED_EDGE('',*,*,#22088,.T.); +#22088 = EDGE_CURVE('',#22081,#22089,#22091,.T.); +#22089 = VERTEX_POINT('',#22090); +#22090 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#22091 = LINE('',#22092,#22093); +#22092 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#22093 = VECTOR('',#22094,1.); +#22094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22095 = ORIENTED_EDGE('',*,*,#22096,.T.); +#22096 = EDGE_CURVE('',#22089,#22097,#22099,.T.); +#22097 = VERTEX_POINT('',#22098); +#22098 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#22099 = LINE('',#22100,#22101); +#22100 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#22101 = VECTOR('',#22102,1.); +#22102 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22103 = ORIENTED_EDGE('',*,*,#22104,.T.); +#22104 = EDGE_CURVE('',#22097,#22105,#22107,.T.); +#22105 = VERTEX_POINT('',#22106); +#22106 = CARTESIAN_POINT('',(0.1,-18.08,0.2)); +#22107 = LINE('',#22108,#22109); +#22108 = CARTESIAN_POINT('',(0.1,-20.955,0.2)); +#22109 = VECTOR('',#22110,1.); +#22110 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22111 = ORIENTED_EDGE('',*,*,#22112,.T.); +#22112 = EDGE_CURVE('',#22105,#22057,#22113,.T.); +#22113 = LINE('',#22114,#22115); +#22114 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#22115 = VECTOR('',#22116,1.); +#22116 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22117 = FACE_BOUND('',#22118,.F.); +#22118 = EDGE_LOOP('',(#22119,#22129,#22137,#22145,#22153,#22161,#22169, + #22177)); +#22119 = ORIENTED_EDGE('',*,*,#22120,.F.); +#22120 = EDGE_CURVE('',#22121,#22123,#22125,.T.); +#22121 = VERTEX_POINT('',#22122); +#22122 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22123 = VERTEX_POINT('',#22124); +#22124 = CARTESIAN_POINT('',(0.1,-15.69,0.2)); +#22125 = LINE('',#22126,#22127); +#22126 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22127 = VECTOR('',#22128,1.); +#22128 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22129 = ORIENTED_EDGE('',*,*,#22130,.T.); +#22130 = EDGE_CURVE('',#22121,#22131,#22133,.T.); +#22131 = VERTEX_POINT('',#22132); +#22132 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#22133 = LINE('',#22134,#22135); +#22134 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22135 = VECTOR('',#22136,1.); +#22136 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22137 = ORIENTED_EDGE('',*,*,#22138,.F.); +#22138 = EDGE_CURVE('',#22139,#22131,#22141,.T.); +#22139 = VERTEX_POINT('',#22140); +#22140 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#22141 = LINE('',#22142,#22143); +#22142 = CARTESIAN_POINT('',(-0.1,-19.685,0.2)); +#22143 = VECTOR('',#22144,1.); +#22144 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22145 = ORIENTED_EDGE('',*,*,#22146,.T.); +#22146 = EDGE_CURVE('',#22139,#22147,#22149,.T.); +#22147 = VERTEX_POINT('',#22148); +#22148 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#22149 = LINE('',#22150,#22151); +#22150 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#22151 = VECTOR('',#22152,1.); +#22152 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22153 = ORIENTED_EDGE('',*,*,#22154,.T.); +#22154 = EDGE_CURVE('',#22147,#22155,#22157,.T.); +#22155 = VERTEX_POINT('',#22156); +#22156 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#22157 = LINE('',#22158,#22159); +#22158 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#22159 = VECTOR('',#22160,1.); +#22160 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22161 = ORIENTED_EDGE('',*,*,#22162,.T.); +#22162 = EDGE_CURVE('',#22155,#22163,#22165,.T.); +#22163 = VERTEX_POINT('',#22164); +#22164 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#22165 = LINE('',#22166,#22167); +#22166 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#22167 = VECTOR('',#22168,1.); +#22168 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22169 = ORIENTED_EDGE('',*,*,#22170,.T.); +#22170 = EDGE_CURVE('',#22163,#22171,#22173,.T.); +#22171 = VERTEX_POINT('',#22172); +#22172 = CARTESIAN_POINT('',(0.1,-15.54,0.2)); +#22173 = LINE('',#22174,#22175); +#22174 = CARTESIAN_POINT('',(0.1,-19.685,0.2)); +#22175 = VECTOR('',#22176,1.); +#22176 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22177 = ORIENTED_EDGE('',*,*,#22178,.T.); +#22178 = EDGE_CURVE('',#22171,#22123,#22179,.T.); +#22179 = LINE('',#22180,#22181); +#22180 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#22181 = VECTOR('',#22182,1.); +#22182 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22183 = FACE_BOUND('',#22184,.F.); +#22184 = EDGE_LOOP('',(#22185,#22195,#22203,#22211,#22219,#22227,#22235, + #22243)); +#22185 = ORIENTED_EDGE('',*,*,#22186,.F.); +#22186 = EDGE_CURVE('',#22187,#22189,#22191,.T.); +#22187 = VERTEX_POINT('',#22188); +#22188 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22189 = VERTEX_POINT('',#22190); +#22190 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#22191 = LINE('',#22192,#22193); +#22192 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22193 = VECTOR('',#22194,1.); +#22194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22195 = ORIENTED_EDGE('',*,*,#22196,.T.); +#22196 = EDGE_CURVE('',#22187,#22197,#22199,.T.); +#22197 = VERTEX_POINT('',#22198); +#22198 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#22199 = LINE('',#22200,#22201); +#22200 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22201 = VECTOR('',#22202,1.); +#22202 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22203 = ORIENTED_EDGE('',*,*,#22204,.F.); +#22204 = EDGE_CURVE('',#22205,#22197,#22207,.T.); +#22205 = VERTEX_POINT('',#22206); +#22206 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#22207 = LINE('',#22208,#22209); +#22208 = CARTESIAN_POINT('',(-0.1,-18.415,0.2)); +#22209 = VECTOR('',#22210,1.); +#22210 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22211 = ORIENTED_EDGE('',*,*,#22212,.T.); +#22212 = EDGE_CURVE('',#22205,#22213,#22215,.T.); +#22213 = VERTEX_POINT('',#22214); +#22214 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#22215 = LINE('',#22216,#22217); +#22216 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#22217 = VECTOR('',#22218,1.); +#22218 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22219 = ORIENTED_EDGE('',*,*,#22220,.T.); +#22220 = EDGE_CURVE('',#22213,#22221,#22223,.T.); +#22221 = VERTEX_POINT('',#22222); +#22222 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#22223 = LINE('',#22224,#22225); +#22224 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#22225 = VECTOR('',#22226,1.); +#22226 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22227 = ORIENTED_EDGE('',*,*,#22228,.T.); +#22228 = EDGE_CURVE('',#22221,#22229,#22231,.T.); +#22229 = VERTEX_POINT('',#22230); +#22230 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#22231 = LINE('',#22232,#22233); +#22232 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#22233 = VECTOR('',#22234,1.); +#22234 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22235 = ORIENTED_EDGE('',*,*,#22236,.T.); +#22236 = EDGE_CURVE('',#22229,#22237,#22239,.T.); +#22237 = VERTEX_POINT('',#22238); +#22238 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#22239 = LINE('',#22240,#22241); +#22240 = CARTESIAN_POINT('',(0.1,-18.415,0.2)); +#22241 = VECTOR('',#22242,1.); +#22242 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22243 = ORIENTED_EDGE('',*,*,#22244,.T.); +#22244 = EDGE_CURVE('',#22237,#22189,#22245,.T.); +#22245 = LINE('',#22246,#22247); +#22246 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#22247 = VECTOR('',#22248,1.); +#22248 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22249 = FACE_BOUND('',#22250,.F.); +#22250 = EDGE_LOOP('',(#22251,#22261,#22269,#22277,#22285,#22293,#22301, + #22309)); +#22251 = ORIENTED_EDGE('',*,*,#22252,.F.); +#22252 = EDGE_CURVE('',#22253,#22255,#22257,.T.); +#22253 = VERTEX_POINT('',#22254); +#22254 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22255 = VERTEX_POINT('',#22256); +#22256 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#22257 = LINE('',#22258,#22259); +#22258 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22259 = VECTOR('',#22260,1.); +#22260 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22261 = ORIENTED_EDGE('',*,*,#22262,.T.); +#22262 = EDGE_CURVE('',#22253,#22263,#22265,.T.); +#22263 = VERTEX_POINT('',#22264); +#22264 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#22265 = LINE('',#22266,#22267); +#22266 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22267 = VECTOR('',#22268,1.); +#22268 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22269 = ORIENTED_EDGE('',*,*,#22270,.F.); +#22270 = EDGE_CURVE('',#22271,#22263,#22273,.T.); +#22271 = VERTEX_POINT('',#22272); +#22272 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#22273 = LINE('',#22274,#22275); +#22274 = CARTESIAN_POINT('',(-0.1,-17.145,0.2)); +#22275 = VECTOR('',#22276,1.); +#22276 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22277 = ORIENTED_EDGE('',*,*,#22278,.T.); +#22278 = EDGE_CURVE('',#22271,#22279,#22281,.T.); +#22279 = VERTEX_POINT('',#22280); +#22280 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#22281 = LINE('',#22282,#22283); +#22282 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#22283 = VECTOR('',#22284,1.); +#22284 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22285 = ORIENTED_EDGE('',*,*,#22286,.T.); +#22286 = EDGE_CURVE('',#22279,#22287,#22289,.T.); +#22287 = VERTEX_POINT('',#22288); +#22288 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#22289 = LINE('',#22290,#22291); +#22290 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#22291 = VECTOR('',#22292,1.); +#22292 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22293 = ORIENTED_EDGE('',*,*,#22294,.T.); +#22294 = EDGE_CURVE('',#22287,#22295,#22297,.T.); +#22295 = VERTEX_POINT('',#22296); +#22296 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#22297 = LINE('',#22298,#22299); +#22298 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#22299 = VECTOR('',#22300,1.); +#22300 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22301 = ORIENTED_EDGE('',*,*,#22302,.T.); +#22302 = EDGE_CURVE('',#22295,#22303,#22305,.T.); +#22303 = VERTEX_POINT('',#22304); +#22304 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#22305 = LINE('',#22306,#22307); +#22306 = CARTESIAN_POINT('',(0.1,-17.145,0.2)); +#22307 = VECTOR('',#22308,1.); +#22308 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22309 = ORIENTED_EDGE('',*,*,#22310,.T.); +#22310 = EDGE_CURVE('',#22303,#22255,#22311,.T.); +#22311 = LINE('',#22312,#22313); +#22312 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#22313 = VECTOR('',#22314,1.); +#22314 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22315 = FACE_BOUND('',#22316,.F.); +#22316 = EDGE_LOOP('',(#22317,#22327,#22335,#22343,#22351,#22359,#22367, + #22375)); +#22317 = ORIENTED_EDGE('',*,*,#22318,.F.); +#22318 = EDGE_CURVE('',#22319,#22321,#22323,.T.); +#22319 = VERTEX_POINT('',#22320); +#22320 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22321 = VERTEX_POINT('',#22322); +#22322 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#22323 = LINE('',#22324,#22325); +#22324 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22325 = VECTOR('',#22326,1.); +#22326 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22327 = ORIENTED_EDGE('',*,*,#22328,.T.); +#22328 = EDGE_CURVE('',#22319,#22329,#22331,.T.); +#22329 = VERTEX_POINT('',#22330); +#22330 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#22331 = LINE('',#22332,#22333); +#22332 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22333 = VECTOR('',#22334,1.); +#22334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22335 = ORIENTED_EDGE('',*,*,#22336,.F.); +#22336 = EDGE_CURVE('',#22337,#22329,#22339,.T.); +#22337 = VERTEX_POINT('',#22338); +#22338 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#22339 = LINE('',#22340,#22341); +#22340 = CARTESIAN_POINT('',(-0.1,-15.875,0.2)); +#22341 = VECTOR('',#22342,1.); +#22342 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22343 = ORIENTED_EDGE('',*,*,#22344,.T.); +#22344 = EDGE_CURVE('',#22337,#22345,#22347,.T.); +#22345 = VERTEX_POINT('',#22346); +#22346 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#22347 = LINE('',#22348,#22349); +#22348 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#22349 = VECTOR('',#22350,1.); +#22350 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22351 = ORIENTED_EDGE('',*,*,#22352,.T.); +#22352 = EDGE_CURVE('',#22345,#22353,#22355,.T.); +#22353 = VERTEX_POINT('',#22354); +#22354 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#22355 = LINE('',#22356,#22357); +#22356 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#22357 = VECTOR('',#22358,1.); +#22358 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22359 = ORIENTED_EDGE('',*,*,#22360,.T.); +#22360 = EDGE_CURVE('',#22353,#22361,#22363,.T.); +#22361 = VERTEX_POINT('',#22362); +#22362 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#22363 = LINE('',#22364,#22365); +#22364 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#22365 = VECTOR('',#22366,1.); +#22366 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22367 = ORIENTED_EDGE('',*,*,#22368,.T.); +#22368 = EDGE_CURVE('',#22361,#22369,#22371,.T.); +#22369 = VERTEX_POINT('',#22370); +#22370 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#22371 = LINE('',#22372,#22373); +#22372 = CARTESIAN_POINT('',(0.1,-15.875,0.2)); +#22373 = VECTOR('',#22374,1.); +#22374 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22375 = ORIENTED_EDGE('',*,*,#22376,.T.); +#22376 = EDGE_CURVE('',#22369,#22321,#22377,.T.); +#22377 = LINE('',#22378,#22379); +#22378 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#22379 = VECTOR('',#22380,1.); +#22380 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22381 = FACE_BOUND('',#22382,.F.); +#22382 = EDGE_LOOP('',(#22383,#22393,#22401,#22409,#22417,#22425,#22433, + #22441)); +#22383 = ORIENTED_EDGE('',*,*,#22384,.F.); +#22384 = EDGE_CURVE('',#22385,#22387,#22389,.T.); +#22385 = VERTEX_POINT('',#22386); +#22386 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22387 = VERTEX_POINT('',#22388); +#22388 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#22389 = LINE('',#22390,#22391); +#22390 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22391 = VECTOR('',#22392,1.); +#22392 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22393 = ORIENTED_EDGE('',*,*,#22394,.T.); +#22394 = EDGE_CURVE('',#22385,#22395,#22397,.T.); +#22395 = VERTEX_POINT('',#22396); +#22396 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#22397 = LINE('',#22398,#22399); +#22398 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22399 = VECTOR('',#22400,1.); +#22400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22401 = ORIENTED_EDGE('',*,*,#22402,.F.); +#22402 = EDGE_CURVE('',#22403,#22395,#22405,.T.); +#22403 = VERTEX_POINT('',#22404); +#22404 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#22405 = LINE('',#22406,#22407); +#22406 = CARTESIAN_POINT('',(-0.1,-14.605,0.2)); +#22407 = VECTOR('',#22408,1.); +#22408 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22409 = ORIENTED_EDGE('',*,*,#22410,.T.); +#22410 = EDGE_CURVE('',#22403,#22411,#22413,.T.); +#22411 = VERTEX_POINT('',#22412); +#22412 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#22413 = LINE('',#22414,#22415); +#22414 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#22415 = VECTOR('',#22416,1.); +#22416 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22417 = ORIENTED_EDGE('',*,*,#22418,.T.); +#22418 = EDGE_CURVE('',#22411,#22419,#22421,.T.); +#22419 = VERTEX_POINT('',#22420); +#22420 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#22421 = LINE('',#22422,#22423); +#22422 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#22423 = VECTOR('',#22424,1.); +#22424 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22425 = ORIENTED_EDGE('',*,*,#22426,.T.); +#22426 = EDGE_CURVE('',#22419,#22427,#22429,.T.); +#22427 = VERTEX_POINT('',#22428); +#22428 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#22429 = LINE('',#22430,#22431); +#22430 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#22431 = VECTOR('',#22432,1.); +#22432 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22433 = ORIENTED_EDGE('',*,*,#22434,.T.); +#22434 = EDGE_CURVE('',#22427,#22435,#22437,.T.); +#22435 = VERTEX_POINT('',#22436); +#22436 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#22437 = LINE('',#22438,#22439); +#22438 = CARTESIAN_POINT('',(0.1,-14.605,0.2)); +#22439 = VECTOR('',#22440,1.); +#22440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22441 = ORIENTED_EDGE('',*,*,#22442,.T.); +#22442 = EDGE_CURVE('',#22435,#22387,#22443,.T.); +#22443 = LINE('',#22444,#22445); +#22444 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#22445 = VECTOR('',#22446,1.); +#22446 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22447 = FACE_BOUND('',#22448,.F.); +#22448 = EDGE_LOOP('',(#22449,#22459,#22467,#22475,#22483,#22491,#22499, + #22507)); +#22449 = ORIENTED_EDGE('',*,*,#22450,.F.); +#22450 = EDGE_CURVE('',#22451,#22453,#22455,.T.); +#22451 = VERTEX_POINT('',#22452); +#22452 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22453 = VERTEX_POINT('',#22454); +#22454 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#22455 = LINE('',#22456,#22457); +#22456 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22457 = VECTOR('',#22458,1.); +#22458 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22459 = ORIENTED_EDGE('',*,*,#22460,.T.); +#22460 = EDGE_CURVE('',#22451,#22461,#22463,.T.); +#22461 = VERTEX_POINT('',#22462); +#22462 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#22463 = LINE('',#22464,#22465); +#22464 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22465 = VECTOR('',#22466,1.); +#22466 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22467 = ORIENTED_EDGE('',*,*,#22468,.F.); +#22468 = EDGE_CURVE('',#22469,#22461,#22471,.T.); +#22469 = VERTEX_POINT('',#22470); +#22470 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#22471 = LINE('',#22472,#22473); +#22472 = CARTESIAN_POINT('',(-0.1,-13.335,0.2)); +#22473 = VECTOR('',#22474,1.); +#22474 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22475 = ORIENTED_EDGE('',*,*,#22476,.T.); +#22476 = EDGE_CURVE('',#22469,#22477,#22479,.T.); +#22477 = VERTEX_POINT('',#22478); +#22478 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#22479 = LINE('',#22480,#22481); +#22480 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#22481 = VECTOR('',#22482,1.); +#22482 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22483 = ORIENTED_EDGE('',*,*,#22484,.T.); +#22484 = EDGE_CURVE('',#22477,#22485,#22487,.T.); +#22485 = VERTEX_POINT('',#22486); +#22486 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#22487 = LINE('',#22488,#22489); +#22488 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#22489 = VECTOR('',#22490,1.); +#22490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22491 = ORIENTED_EDGE('',*,*,#22492,.T.); +#22492 = EDGE_CURVE('',#22485,#22493,#22495,.T.); +#22493 = VERTEX_POINT('',#22494); +#22494 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#22495 = LINE('',#22496,#22497); +#22496 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#22497 = VECTOR('',#22498,1.); +#22498 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22499 = ORIENTED_EDGE('',*,*,#22500,.T.); +#22500 = EDGE_CURVE('',#22493,#22501,#22503,.T.); +#22501 = VERTEX_POINT('',#22502); +#22502 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#22503 = LINE('',#22504,#22505); +#22504 = CARTESIAN_POINT('',(0.1,-13.335,0.2)); +#22505 = VECTOR('',#22506,1.); +#22506 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22507 = ORIENTED_EDGE('',*,*,#22508,.T.); +#22508 = EDGE_CURVE('',#22501,#22453,#22509,.T.); +#22509 = LINE('',#22510,#22511); +#22510 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#22511 = VECTOR('',#22512,1.); +#22512 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22513 = FACE_BOUND('',#22514,.F.); +#22514 = EDGE_LOOP('',(#22515,#22525,#22533,#22541,#22549,#22557,#22565, + #22573)); +#22515 = ORIENTED_EDGE('',*,*,#22516,.F.); +#22516 = EDGE_CURVE('',#22517,#22519,#22521,.T.); +#22517 = VERTEX_POINT('',#22518); +#22518 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22519 = VERTEX_POINT('',#22520); +#22520 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#22521 = LINE('',#22522,#22523); +#22522 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22523 = VECTOR('',#22524,1.); +#22524 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22525 = ORIENTED_EDGE('',*,*,#22526,.T.); +#22526 = EDGE_CURVE('',#22517,#22527,#22529,.T.); +#22527 = VERTEX_POINT('',#22528); +#22528 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#22529 = LINE('',#22530,#22531); +#22530 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22531 = VECTOR('',#22532,1.); +#22532 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22533 = ORIENTED_EDGE('',*,*,#22534,.F.); +#22534 = EDGE_CURVE('',#22535,#22527,#22537,.T.); +#22535 = VERTEX_POINT('',#22536); +#22536 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#22537 = LINE('',#22538,#22539); +#22538 = CARTESIAN_POINT('',(-0.1,-12.065,0.2)); +#22539 = VECTOR('',#22540,1.); +#22540 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22541 = ORIENTED_EDGE('',*,*,#22542,.T.); +#22542 = EDGE_CURVE('',#22535,#22543,#22545,.T.); +#22543 = VERTEX_POINT('',#22544); +#22544 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#22545 = LINE('',#22546,#22547); +#22546 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#22547 = VECTOR('',#22548,1.); +#22548 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22549 = ORIENTED_EDGE('',*,*,#22550,.T.); +#22550 = EDGE_CURVE('',#22543,#22551,#22553,.T.); +#22551 = VERTEX_POINT('',#22552); +#22552 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#22553 = LINE('',#22554,#22555); +#22554 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#22555 = VECTOR('',#22556,1.); +#22556 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22557 = ORIENTED_EDGE('',*,*,#22558,.T.); +#22558 = EDGE_CURVE('',#22551,#22559,#22561,.T.); +#22559 = VERTEX_POINT('',#22560); +#22560 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#22561 = LINE('',#22562,#22563); +#22562 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#22563 = VECTOR('',#22564,1.); +#22564 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22565 = ORIENTED_EDGE('',*,*,#22566,.T.); +#22566 = EDGE_CURVE('',#22559,#22567,#22569,.T.); +#22567 = VERTEX_POINT('',#22568); +#22568 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#22569 = LINE('',#22570,#22571); +#22570 = CARTESIAN_POINT('',(0.1,-12.065,0.2)); +#22571 = VECTOR('',#22572,1.); +#22572 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22573 = ORIENTED_EDGE('',*,*,#22574,.T.); +#22574 = EDGE_CURVE('',#22567,#22519,#22575,.T.); +#22575 = LINE('',#22576,#22577); +#22576 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#22577 = VECTOR('',#22578,1.); +#22578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22579 = PLANE('',#22580); +#22580 = AXIS2_PLACEMENT_3D('',#22581,#22582,#22583); +#22581 = CARTESIAN_POINT('',(-2.651212582805E-15,-24.13,0.2)); +#22582 = DIRECTION('',(0.,0.,1.)); +#22583 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#22584 = ADVANCED_FACE('',(#22585),#22591,.T.); +#22585 = FACE_BOUND('',#22586,.T.); +#22586 = EDGE_LOOP('',(#22587,#22588,#22589,#22590)); +#22587 = ORIENTED_EDGE('',*,*,#20405,.T.); +#22588 = ORIENTED_EDGE('',*,*,#21251,.T.); +#22589 = ORIENTED_EDGE('',*,*,#20484,.F.); +#22590 = ORIENTED_EDGE('',*,*,#20501,.F.); +#22591 = PLANE('',#22592); +#22592 = AXIS2_PLACEMENT_3D('',#22593,#22594,#22595); +#22593 = CARTESIAN_POINT('',(0.846666666667,-49.53,0.)); +#22594 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22595 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22596 = ADVANCED_FACE('',(#22597),#22603,.F.); +#22597 = FACE_BOUND('',#22598,.F.); +#22598 = EDGE_LOOP('',(#22599,#22600,#22601,#22602)); +#22599 = ORIENTED_EDGE('',*,*,#20452,.T.); +#22600 = ORIENTED_EDGE('',*,*,#20517,.T.); +#22601 = ORIENTED_EDGE('',*,*,#20382,.F.); +#22602 = ORIENTED_EDGE('',*,*,#21220,.F.); +#22603 = PLANE('',#22604); +#22604 = AXIS2_PLACEMENT_3D('',#22605,#22606,#22607); +#22605 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#22606 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22607 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22608 = ADVANCED_FACE('',(#22609),#22634,.T.); +#22609 = FACE_BOUND('',#22610,.T.); +#22610 = EDGE_LOOP('',(#22611,#22619,#22620,#22628)); +#22611 = ORIENTED_EDGE('',*,*,#22612,.F.); +#22612 = EDGE_CURVE('',#20527,#22613,#22615,.T.); +#22613 = VERTEX_POINT('',#22614); +#22614 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#22615 = LINE('',#22616,#22617); +#22616 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#22617 = VECTOR('',#22618,1.); +#22618 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22619 = ORIENTED_EDGE('',*,*,#20526,.T.); +#22620 = ORIENTED_EDGE('',*,*,#22621,.T.); +#22621 = EDGE_CURVE('',#20529,#22622,#22624,.T.); +#22622 = VERTEX_POINT('',#22623); +#22623 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#22624 = LINE('',#22625,#22626); +#22625 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#22626 = VECTOR('',#22627,1.); +#22627 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22628 = ORIENTED_EDGE('',*,*,#22629,.F.); +#22629 = EDGE_CURVE('',#22613,#22622,#22630,.T.); +#22630 = LINE('',#22631,#22632); +#22631 = CARTESIAN_POINT('',(0.3,-48.86,8.2)); +#22632 = VECTOR('',#22633,1.); +#22633 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22634 = PLANE('',#22635); +#22635 = AXIS2_PLACEMENT_3D('',#22636,#22637,#22638); +#22636 = CARTESIAN_POINT('',(0.45,-48.86,8.35)); +#22637 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22638 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22639 = ADVANCED_FACE('',(#22640),#22658,.T.); +#22640 = FACE_BOUND('',#22641,.T.); +#22641 = EDGE_LOOP('',(#22642,#22643,#22644,#22652)); +#22642 = ORIENTED_EDGE('',*,*,#22621,.F.); +#22643 = ORIENTED_EDGE('',*,*,#20552,.T.); +#22644 = ORIENTED_EDGE('',*,*,#22645,.T.); +#22645 = EDGE_CURVE('',#20545,#22646,#22648,.T.); +#22646 = VERTEX_POINT('',#22647); +#22647 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#22648 = LINE('',#22649,#22650); +#22649 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#22650 = VECTOR('',#22651,1.); +#22651 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22652 = ORIENTED_EDGE('',*,*,#22653,.F.); +#22653 = EDGE_CURVE('',#22622,#22646,#22654,.T.); +#22654 = LINE('',#22655,#22656); +#22655 = CARTESIAN_POINT('',(0.6,-47.96,8.2)); +#22656 = VECTOR('',#22657,1.); +#22657 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22658 = PLANE('',#22659); +#22659 = AXIS2_PLACEMENT_3D('',#22660,#22661,#22662); +#22660 = CARTESIAN_POINT('',(0.6,-47.81,8.35)); +#22661 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22662 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22663 = ADVANCED_FACE('',(#22664),#22682,.T.); +#22664 = FACE_BOUND('',#22665,.T.); +#22665 = EDGE_LOOP('',(#22666,#22667,#22668,#22676)); +#22666 = ORIENTED_EDGE('',*,*,#22645,.F.); +#22667 = ORIENTED_EDGE('',*,*,#20544,.T.); +#22668 = ORIENTED_EDGE('',*,*,#22669,.T.); +#22669 = EDGE_CURVE('',#20537,#22670,#22672,.T.); +#22670 = VERTEX_POINT('',#22671); +#22671 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#22672 = LINE('',#22673,#22674); +#22673 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#22674 = VECTOR('',#22675,1.); +#22675 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22676 = ORIENTED_EDGE('',*,*,#22677,.F.); +#22677 = EDGE_CURVE('',#22646,#22670,#22678,.T.); +#22678 = LINE('',#22679,#22680); +#22679 = CARTESIAN_POINT('',(-0.3,-47.66,8.2)); +#22680 = VECTOR('',#22681,1.); +#22681 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22682 = PLANE('',#22683); +#22683 = AXIS2_PLACEMENT_3D('',#22684,#22685,#22686); +#22684 = CARTESIAN_POINT('',(-0.45,-47.66,8.35)); +#22685 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22686 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22687 = ADVANCED_FACE('',(#22688),#22699,.T.); +#22688 = FACE_BOUND('',#22689,.T.); +#22689 = EDGE_LOOP('',(#22690,#22691,#22692,#22693)); +#22690 = ORIENTED_EDGE('',*,*,#22669,.F.); +#22691 = ORIENTED_EDGE('',*,*,#20536,.T.); +#22692 = ORIENTED_EDGE('',*,*,#22612,.T.); +#22693 = ORIENTED_EDGE('',*,*,#22694,.F.); +#22694 = EDGE_CURVE('',#22670,#22613,#22695,.T.); +#22695 = LINE('',#22696,#22697); +#22696 = CARTESIAN_POINT('',(-0.6,-48.56,8.2)); +#22697 = VECTOR('',#22698,1.); +#22698 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22699 = PLANE('',#22700); +#22700 = AXIS2_PLACEMENT_3D('',#22701,#22702,#22703); +#22701 = CARTESIAN_POINT('',(-0.6,-48.71,8.35)); +#22702 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22703 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22704 = ADVANCED_FACE('',(#22705),#22730,.T.); +#22705 = FACE_BOUND('',#22706,.T.); +#22706 = EDGE_LOOP('',(#22707,#22715,#22716,#22724)); +#22707 = ORIENTED_EDGE('',*,*,#22708,.F.); +#22708 = EDGE_CURVE('',#20561,#22709,#22711,.T.); +#22709 = VERTEX_POINT('',#22710); +#22710 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#22711 = LINE('',#22712,#22713); +#22712 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#22713 = VECTOR('',#22714,1.); +#22714 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22715 = ORIENTED_EDGE('',*,*,#20560,.T.); +#22716 = ORIENTED_EDGE('',*,*,#22717,.T.); +#22717 = EDGE_CURVE('',#20563,#22718,#22720,.T.); +#22718 = VERTEX_POINT('',#22719); +#22719 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#22720 = LINE('',#22721,#22722); +#22721 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#22722 = VECTOR('',#22723,1.); +#22723 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22724 = ORIENTED_EDGE('',*,*,#22725,.F.); +#22725 = EDGE_CURVE('',#22709,#22718,#22726,.T.); +#22726 = LINE('',#22727,#22728); +#22727 = CARTESIAN_POINT('',(0.3,-46.32,8.2)); +#22728 = VECTOR('',#22729,1.); +#22729 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22730 = PLANE('',#22731); +#22731 = AXIS2_PLACEMENT_3D('',#22732,#22733,#22734); +#22732 = CARTESIAN_POINT('',(0.45,-46.32,8.35)); +#22733 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22734 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22735 = ADVANCED_FACE('',(#22736),#22754,.T.); +#22736 = FACE_BOUND('',#22737,.T.); +#22737 = EDGE_LOOP('',(#22738,#22739,#22740,#22748)); +#22738 = ORIENTED_EDGE('',*,*,#22717,.F.); +#22739 = ORIENTED_EDGE('',*,*,#20586,.T.); +#22740 = ORIENTED_EDGE('',*,*,#22741,.T.); +#22741 = EDGE_CURVE('',#20579,#22742,#22744,.T.); +#22742 = VERTEX_POINT('',#22743); +#22743 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#22744 = LINE('',#22745,#22746); +#22745 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#22746 = VECTOR('',#22747,1.); +#22747 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22748 = ORIENTED_EDGE('',*,*,#22749,.F.); +#22749 = EDGE_CURVE('',#22718,#22742,#22750,.T.); +#22750 = LINE('',#22751,#22752); +#22751 = CARTESIAN_POINT('',(0.6,-45.42,8.2)); +#22752 = VECTOR('',#22753,1.); +#22753 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22754 = PLANE('',#22755); +#22755 = AXIS2_PLACEMENT_3D('',#22756,#22757,#22758); +#22756 = CARTESIAN_POINT('',(0.6,-45.27,8.35)); +#22757 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22758 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22759 = ADVANCED_FACE('',(#22760),#22778,.T.); +#22760 = FACE_BOUND('',#22761,.T.); +#22761 = EDGE_LOOP('',(#22762,#22763,#22764,#22772)); +#22762 = ORIENTED_EDGE('',*,*,#22741,.F.); +#22763 = ORIENTED_EDGE('',*,*,#20578,.T.); +#22764 = ORIENTED_EDGE('',*,*,#22765,.T.); +#22765 = EDGE_CURVE('',#20571,#22766,#22768,.T.); +#22766 = VERTEX_POINT('',#22767); +#22767 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#22768 = LINE('',#22769,#22770); +#22769 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#22770 = VECTOR('',#22771,1.); +#22771 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22772 = ORIENTED_EDGE('',*,*,#22773,.F.); +#22773 = EDGE_CURVE('',#22742,#22766,#22774,.T.); +#22774 = LINE('',#22775,#22776); +#22775 = CARTESIAN_POINT('',(-0.3,-45.12,8.2)); +#22776 = VECTOR('',#22777,1.); +#22777 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22778 = PLANE('',#22779); +#22779 = AXIS2_PLACEMENT_3D('',#22780,#22781,#22782); +#22780 = CARTESIAN_POINT('',(-0.45,-45.12,8.35)); +#22781 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22782 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22783 = ADVANCED_FACE('',(#22784),#22795,.T.); +#22784 = FACE_BOUND('',#22785,.T.); +#22785 = EDGE_LOOP('',(#22786,#22787,#22788,#22789)); +#22786 = ORIENTED_EDGE('',*,*,#22765,.F.); +#22787 = ORIENTED_EDGE('',*,*,#20570,.T.); +#22788 = ORIENTED_EDGE('',*,*,#22708,.T.); +#22789 = ORIENTED_EDGE('',*,*,#22790,.F.); +#22790 = EDGE_CURVE('',#22766,#22709,#22791,.T.); +#22791 = LINE('',#22792,#22793); +#22792 = CARTESIAN_POINT('',(-0.6,-46.02,8.2)); +#22793 = VECTOR('',#22794,1.); +#22794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22795 = PLANE('',#22796); +#22796 = AXIS2_PLACEMENT_3D('',#22797,#22798,#22799); +#22797 = CARTESIAN_POINT('',(-0.6,-46.17,8.35)); +#22798 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22799 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22800 = ADVANCED_FACE('',(#22801),#22826,.T.); +#22801 = FACE_BOUND('',#22802,.T.); +#22802 = EDGE_LOOP('',(#22803,#22811,#22812,#22820)); +#22803 = ORIENTED_EDGE('',*,*,#22804,.F.); +#22804 = EDGE_CURVE('',#20595,#22805,#22807,.T.); +#22805 = VERTEX_POINT('',#22806); +#22806 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#22807 = LINE('',#22808,#22809); +#22808 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#22809 = VECTOR('',#22810,1.); +#22810 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22811 = ORIENTED_EDGE('',*,*,#20594,.T.); +#22812 = ORIENTED_EDGE('',*,*,#22813,.T.); +#22813 = EDGE_CURVE('',#20597,#22814,#22816,.T.); +#22814 = VERTEX_POINT('',#22815); +#22815 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#22816 = LINE('',#22817,#22818); +#22817 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#22818 = VECTOR('',#22819,1.); +#22819 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22820 = ORIENTED_EDGE('',*,*,#22821,.F.); +#22821 = EDGE_CURVE('',#22805,#22814,#22822,.T.); +#22822 = LINE('',#22823,#22824); +#22823 = CARTESIAN_POINT('',(0.3,-43.78,8.2)); +#22824 = VECTOR('',#22825,1.); +#22825 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22826 = PLANE('',#22827); +#22827 = AXIS2_PLACEMENT_3D('',#22828,#22829,#22830); +#22828 = CARTESIAN_POINT('',(0.45,-43.78,8.35)); +#22829 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22830 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22831 = ADVANCED_FACE('',(#22832),#22850,.T.); +#22832 = FACE_BOUND('',#22833,.T.); +#22833 = EDGE_LOOP('',(#22834,#22835,#22836,#22844)); +#22834 = ORIENTED_EDGE('',*,*,#22813,.F.); +#22835 = ORIENTED_EDGE('',*,*,#20620,.T.); +#22836 = ORIENTED_EDGE('',*,*,#22837,.T.); +#22837 = EDGE_CURVE('',#20613,#22838,#22840,.T.); +#22838 = VERTEX_POINT('',#22839); +#22839 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#22840 = LINE('',#22841,#22842); +#22841 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#22842 = VECTOR('',#22843,1.); +#22843 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22844 = ORIENTED_EDGE('',*,*,#22845,.F.); +#22845 = EDGE_CURVE('',#22814,#22838,#22846,.T.); +#22846 = LINE('',#22847,#22848); +#22847 = CARTESIAN_POINT('',(0.6,-42.88,8.2)); +#22848 = VECTOR('',#22849,1.); +#22849 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22850 = PLANE('',#22851); +#22851 = AXIS2_PLACEMENT_3D('',#22852,#22853,#22854); +#22852 = CARTESIAN_POINT('',(0.6,-42.73,8.35)); +#22853 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22854 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22855 = ADVANCED_FACE('',(#22856),#22874,.T.); +#22856 = FACE_BOUND('',#22857,.T.); +#22857 = EDGE_LOOP('',(#22858,#22859,#22860,#22868)); +#22858 = ORIENTED_EDGE('',*,*,#22837,.F.); +#22859 = ORIENTED_EDGE('',*,*,#20612,.T.); +#22860 = ORIENTED_EDGE('',*,*,#22861,.T.); +#22861 = EDGE_CURVE('',#20605,#22862,#22864,.T.); +#22862 = VERTEX_POINT('',#22863); +#22863 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#22864 = LINE('',#22865,#22866); +#22865 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#22866 = VECTOR('',#22867,1.); +#22867 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22868 = ORIENTED_EDGE('',*,*,#22869,.F.); +#22869 = EDGE_CURVE('',#22838,#22862,#22870,.T.); +#22870 = LINE('',#22871,#22872); +#22871 = CARTESIAN_POINT('',(-0.3,-42.58,8.2)); +#22872 = VECTOR('',#22873,1.); +#22873 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22874 = PLANE('',#22875); +#22875 = AXIS2_PLACEMENT_3D('',#22876,#22877,#22878); +#22876 = CARTESIAN_POINT('',(-0.45,-42.58,8.35)); +#22877 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22878 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22879 = ADVANCED_FACE('',(#22880),#22891,.T.); +#22880 = FACE_BOUND('',#22881,.T.); +#22881 = EDGE_LOOP('',(#22882,#22883,#22884,#22885)); +#22882 = ORIENTED_EDGE('',*,*,#22861,.F.); +#22883 = ORIENTED_EDGE('',*,*,#20604,.T.); +#22884 = ORIENTED_EDGE('',*,*,#22804,.T.); +#22885 = ORIENTED_EDGE('',*,*,#22886,.F.); +#22886 = EDGE_CURVE('',#22862,#22805,#22887,.T.); +#22887 = LINE('',#22888,#22889); +#22888 = CARTESIAN_POINT('',(-0.6,-43.48,8.2)); +#22889 = VECTOR('',#22890,1.); +#22890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22891 = PLANE('',#22892); +#22892 = AXIS2_PLACEMENT_3D('',#22893,#22894,#22895); +#22893 = CARTESIAN_POINT('',(-0.6,-43.63,8.35)); +#22894 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22895 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22896 = ADVANCED_FACE('',(#22897),#22922,.T.); +#22897 = FACE_BOUND('',#22898,.T.); +#22898 = EDGE_LOOP('',(#22899,#22907,#22908,#22916)); +#22899 = ORIENTED_EDGE('',*,*,#22900,.F.); +#22900 = EDGE_CURVE('',#20629,#22901,#22903,.T.); +#22901 = VERTEX_POINT('',#22902); +#22902 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#22903 = LINE('',#22904,#22905); +#22904 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#22905 = VECTOR('',#22906,1.); +#22906 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22907 = ORIENTED_EDGE('',*,*,#20628,.T.); +#22908 = ORIENTED_EDGE('',*,*,#22909,.T.); +#22909 = EDGE_CURVE('',#20631,#22910,#22912,.T.); +#22910 = VERTEX_POINT('',#22911); +#22911 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#22912 = LINE('',#22913,#22914); +#22913 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#22914 = VECTOR('',#22915,1.); +#22915 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22916 = ORIENTED_EDGE('',*,*,#22917,.F.); +#22917 = EDGE_CURVE('',#22901,#22910,#22918,.T.); +#22918 = LINE('',#22919,#22920); +#22919 = CARTESIAN_POINT('',(0.3,-41.24,8.2)); +#22920 = VECTOR('',#22921,1.); +#22921 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#22922 = PLANE('',#22923); +#22923 = AXIS2_PLACEMENT_3D('',#22924,#22925,#22926); +#22924 = CARTESIAN_POINT('',(0.45,-41.24,8.35)); +#22925 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#22926 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#22927 = ADVANCED_FACE('',(#22928),#22946,.T.); +#22928 = FACE_BOUND('',#22929,.T.); +#22929 = EDGE_LOOP('',(#22930,#22931,#22932,#22940)); +#22930 = ORIENTED_EDGE('',*,*,#22909,.F.); +#22931 = ORIENTED_EDGE('',*,*,#20654,.T.); +#22932 = ORIENTED_EDGE('',*,*,#22933,.T.); +#22933 = EDGE_CURVE('',#20647,#22934,#22936,.T.); +#22934 = VERTEX_POINT('',#22935); +#22935 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#22936 = LINE('',#22937,#22938); +#22937 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#22938 = VECTOR('',#22939,1.); +#22939 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22940 = ORIENTED_EDGE('',*,*,#22941,.F.); +#22941 = EDGE_CURVE('',#22910,#22934,#22942,.T.); +#22942 = LINE('',#22943,#22944); +#22943 = CARTESIAN_POINT('',(0.6,-40.34,8.2)); +#22944 = VECTOR('',#22945,1.); +#22945 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#22946 = PLANE('',#22947); +#22947 = AXIS2_PLACEMENT_3D('',#22948,#22949,#22950); +#22948 = CARTESIAN_POINT('',(0.6,-40.19,8.35)); +#22949 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#22950 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#22951 = ADVANCED_FACE('',(#22952),#22970,.T.); +#22952 = FACE_BOUND('',#22953,.T.); +#22953 = EDGE_LOOP('',(#22954,#22955,#22956,#22964)); +#22954 = ORIENTED_EDGE('',*,*,#22933,.F.); +#22955 = ORIENTED_EDGE('',*,*,#20646,.T.); +#22956 = ORIENTED_EDGE('',*,*,#22957,.T.); +#22957 = EDGE_CURVE('',#20639,#22958,#22960,.T.); +#22958 = VERTEX_POINT('',#22959); +#22959 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#22960 = LINE('',#22961,#22962); +#22961 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#22962 = VECTOR('',#22963,1.); +#22963 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22964 = ORIENTED_EDGE('',*,*,#22965,.F.); +#22965 = EDGE_CURVE('',#22934,#22958,#22966,.T.); +#22966 = LINE('',#22967,#22968); +#22967 = CARTESIAN_POINT('',(-0.3,-40.04,8.2)); +#22968 = VECTOR('',#22969,1.); +#22969 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#22970 = PLANE('',#22971); +#22971 = AXIS2_PLACEMENT_3D('',#22972,#22973,#22974); +#22972 = CARTESIAN_POINT('',(-0.45,-40.04,8.35)); +#22973 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#22974 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#22975 = ADVANCED_FACE('',(#22976),#22987,.T.); +#22976 = FACE_BOUND('',#22977,.T.); +#22977 = EDGE_LOOP('',(#22978,#22979,#22980,#22981)); +#22978 = ORIENTED_EDGE('',*,*,#22957,.F.); +#22979 = ORIENTED_EDGE('',*,*,#20638,.T.); +#22980 = ORIENTED_EDGE('',*,*,#22900,.T.); +#22981 = ORIENTED_EDGE('',*,*,#22982,.F.); +#22982 = EDGE_CURVE('',#22958,#22901,#22983,.T.); +#22983 = LINE('',#22984,#22985); +#22984 = CARTESIAN_POINT('',(-0.6,-40.94,8.2)); +#22985 = VECTOR('',#22986,1.); +#22986 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#22987 = PLANE('',#22988); +#22988 = AXIS2_PLACEMENT_3D('',#22989,#22990,#22991); +#22989 = CARTESIAN_POINT('',(-0.6,-41.09,8.35)); +#22990 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#22991 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#22992 = ADVANCED_FACE('',(#22993),#23018,.T.); +#22993 = FACE_BOUND('',#22994,.T.); +#22994 = EDGE_LOOP('',(#22995,#23003,#23004,#23012)); +#22995 = ORIENTED_EDGE('',*,*,#22996,.F.); +#22996 = EDGE_CURVE('',#20663,#22997,#22999,.T.); +#22997 = VERTEX_POINT('',#22998); +#22998 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#22999 = LINE('',#23000,#23001); +#23000 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#23001 = VECTOR('',#23002,1.); +#23002 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23003 = ORIENTED_EDGE('',*,*,#20662,.T.); +#23004 = ORIENTED_EDGE('',*,*,#23005,.T.); +#23005 = EDGE_CURVE('',#20665,#23006,#23008,.T.); +#23006 = VERTEX_POINT('',#23007); +#23007 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#23008 = LINE('',#23009,#23010); +#23009 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#23010 = VECTOR('',#23011,1.); +#23011 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23012 = ORIENTED_EDGE('',*,*,#23013,.F.); +#23013 = EDGE_CURVE('',#22997,#23006,#23014,.T.); +#23014 = LINE('',#23015,#23016); +#23015 = CARTESIAN_POINT('',(0.3,-38.7,8.2)); +#23016 = VECTOR('',#23017,1.); +#23017 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23018 = PLANE('',#23019); +#23019 = AXIS2_PLACEMENT_3D('',#23020,#23021,#23022); +#23020 = CARTESIAN_POINT('',(0.45,-38.7,8.35)); +#23021 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23022 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23023 = ADVANCED_FACE('',(#23024),#23042,.T.); +#23024 = FACE_BOUND('',#23025,.T.); +#23025 = EDGE_LOOP('',(#23026,#23027,#23028,#23036)); +#23026 = ORIENTED_EDGE('',*,*,#23005,.F.); +#23027 = ORIENTED_EDGE('',*,*,#20688,.T.); +#23028 = ORIENTED_EDGE('',*,*,#23029,.T.); +#23029 = EDGE_CURVE('',#20681,#23030,#23032,.T.); +#23030 = VERTEX_POINT('',#23031); +#23031 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#23032 = LINE('',#23033,#23034); +#23033 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#23034 = VECTOR('',#23035,1.); +#23035 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23036 = ORIENTED_EDGE('',*,*,#23037,.F.); +#23037 = EDGE_CURVE('',#23006,#23030,#23038,.T.); +#23038 = LINE('',#23039,#23040); +#23039 = CARTESIAN_POINT('',(0.6,-37.8,8.2)); +#23040 = VECTOR('',#23041,1.); +#23041 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23042 = PLANE('',#23043); +#23043 = AXIS2_PLACEMENT_3D('',#23044,#23045,#23046); +#23044 = CARTESIAN_POINT('',(0.6,-37.65,8.35)); +#23045 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23046 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23047 = ADVANCED_FACE('',(#23048),#23066,.T.); +#23048 = FACE_BOUND('',#23049,.T.); +#23049 = EDGE_LOOP('',(#23050,#23051,#23052,#23060)); +#23050 = ORIENTED_EDGE('',*,*,#23029,.F.); +#23051 = ORIENTED_EDGE('',*,*,#20680,.T.); +#23052 = ORIENTED_EDGE('',*,*,#23053,.T.); +#23053 = EDGE_CURVE('',#20673,#23054,#23056,.T.); +#23054 = VERTEX_POINT('',#23055); +#23055 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#23056 = LINE('',#23057,#23058); +#23057 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#23058 = VECTOR('',#23059,1.); +#23059 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23060 = ORIENTED_EDGE('',*,*,#23061,.F.); +#23061 = EDGE_CURVE('',#23030,#23054,#23062,.T.); +#23062 = LINE('',#23063,#23064); +#23063 = CARTESIAN_POINT('',(-0.3,-37.5,8.2)); +#23064 = VECTOR('',#23065,1.); +#23065 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23066 = PLANE('',#23067); +#23067 = AXIS2_PLACEMENT_3D('',#23068,#23069,#23070); +#23068 = CARTESIAN_POINT('',(-0.45,-37.5,8.35)); +#23069 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23070 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23071 = ADVANCED_FACE('',(#23072),#23083,.T.); +#23072 = FACE_BOUND('',#23073,.T.); +#23073 = EDGE_LOOP('',(#23074,#23075,#23076,#23077)); +#23074 = ORIENTED_EDGE('',*,*,#23053,.F.); +#23075 = ORIENTED_EDGE('',*,*,#20672,.T.); +#23076 = ORIENTED_EDGE('',*,*,#22996,.T.); +#23077 = ORIENTED_EDGE('',*,*,#23078,.F.); +#23078 = EDGE_CURVE('',#23054,#22997,#23079,.T.); +#23079 = LINE('',#23080,#23081); +#23080 = CARTESIAN_POINT('',(-0.6,-38.4,8.2)); +#23081 = VECTOR('',#23082,1.); +#23082 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23083 = PLANE('',#23084); +#23084 = AXIS2_PLACEMENT_3D('',#23085,#23086,#23087); +#23085 = CARTESIAN_POINT('',(-0.6,-38.55,8.35)); +#23086 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23087 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23088 = ADVANCED_FACE('',(#23089),#23114,.T.); +#23089 = FACE_BOUND('',#23090,.T.); +#23090 = EDGE_LOOP('',(#23091,#23099,#23100,#23108)); +#23091 = ORIENTED_EDGE('',*,*,#23092,.F.); +#23092 = EDGE_CURVE('',#20697,#23093,#23095,.T.); +#23093 = VERTEX_POINT('',#23094); +#23094 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#23095 = LINE('',#23096,#23097); +#23096 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#23097 = VECTOR('',#23098,1.); +#23098 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23099 = ORIENTED_EDGE('',*,*,#20696,.T.); +#23100 = ORIENTED_EDGE('',*,*,#23101,.T.); +#23101 = EDGE_CURVE('',#20699,#23102,#23104,.T.); +#23102 = VERTEX_POINT('',#23103); +#23103 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#23104 = LINE('',#23105,#23106); +#23105 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#23106 = VECTOR('',#23107,1.); +#23107 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23108 = ORIENTED_EDGE('',*,*,#23109,.F.); +#23109 = EDGE_CURVE('',#23093,#23102,#23110,.T.); +#23110 = LINE('',#23111,#23112); +#23111 = CARTESIAN_POINT('',(0.3,-36.16,8.2)); +#23112 = VECTOR('',#23113,1.); +#23113 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23114 = PLANE('',#23115); +#23115 = AXIS2_PLACEMENT_3D('',#23116,#23117,#23118); +#23116 = CARTESIAN_POINT('',(0.45,-36.16,8.35)); +#23117 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23118 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23119 = ADVANCED_FACE('',(#23120),#23138,.T.); +#23120 = FACE_BOUND('',#23121,.T.); +#23121 = EDGE_LOOP('',(#23122,#23123,#23124,#23132)); +#23122 = ORIENTED_EDGE('',*,*,#23101,.F.); +#23123 = ORIENTED_EDGE('',*,*,#20722,.T.); +#23124 = ORIENTED_EDGE('',*,*,#23125,.T.); +#23125 = EDGE_CURVE('',#20715,#23126,#23128,.T.); +#23126 = VERTEX_POINT('',#23127); +#23127 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#23128 = LINE('',#23129,#23130); +#23129 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#23130 = VECTOR('',#23131,1.); +#23131 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23132 = ORIENTED_EDGE('',*,*,#23133,.F.); +#23133 = EDGE_CURVE('',#23102,#23126,#23134,.T.); +#23134 = LINE('',#23135,#23136); +#23135 = CARTESIAN_POINT('',(0.6,-35.26,8.2)); +#23136 = VECTOR('',#23137,1.); +#23137 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23138 = PLANE('',#23139); +#23139 = AXIS2_PLACEMENT_3D('',#23140,#23141,#23142); +#23140 = CARTESIAN_POINT('',(0.6,-35.11,8.35)); +#23141 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23142 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23143 = ADVANCED_FACE('',(#23144),#23162,.T.); +#23144 = FACE_BOUND('',#23145,.T.); +#23145 = EDGE_LOOP('',(#23146,#23147,#23148,#23156)); +#23146 = ORIENTED_EDGE('',*,*,#23125,.F.); +#23147 = ORIENTED_EDGE('',*,*,#20714,.T.); +#23148 = ORIENTED_EDGE('',*,*,#23149,.T.); +#23149 = EDGE_CURVE('',#20707,#23150,#23152,.T.); +#23150 = VERTEX_POINT('',#23151); +#23151 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#23152 = LINE('',#23153,#23154); +#23153 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#23154 = VECTOR('',#23155,1.); +#23155 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23156 = ORIENTED_EDGE('',*,*,#23157,.F.); +#23157 = EDGE_CURVE('',#23126,#23150,#23158,.T.); +#23158 = LINE('',#23159,#23160); +#23159 = CARTESIAN_POINT('',(-0.3,-34.96,8.2)); +#23160 = VECTOR('',#23161,1.); +#23161 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23162 = PLANE('',#23163); +#23163 = AXIS2_PLACEMENT_3D('',#23164,#23165,#23166); +#23164 = CARTESIAN_POINT('',(-0.45,-34.96,8.35)); +#23165 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23166 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23167 = ADVANCED_FACE('',(#23168),#23179,.T.); +#23168 = FACE_BOUND('',#23169,.T.); +#23169 = EDGE_LOOP('',(#23170,#23171,#23172,#23173)); +#23170 = ORIENTED_EDGE('',*,*,#23149,.F.); +#23171 = ORIENTED_EDGE('',*,*,#20706,.T.); +#23172 = ORIENTED_EDGE('',*,*,#23092,.T.); +#23173 = ORIENTED_EDGE('',*,*,#23174,.F.); +#23174 = EDGE_CURVE('',#23150,#23093,#23175,.T.); +#23175 = LINE('',#23176,#23177); +#23176 = CARTESIAN_POINT('',(-0.6,-35.86,8.2)); +#23177 = VECTOR('',#23178,1.); +#23178 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23179 = PLANE('',#23180); +#23180 = AXIS2_PLACEMENT_3D('',#23181,#23182,#23183); +#23181 = CARTESIAN_POINT('',(-0.6,-36.01,8.35)); +#23182 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23183 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23184 = ADVANCED_FACE('',(#23185),#23210,.T.); +#23185 = FACE_BOUND('',#23186,.T.); +#23186 = EDGE_LOOP('',(#23187,#23195,#23196,#23204)); +#23187 = ORIENTED_EDGE('',*,*,#23188,.F.); +#23188 = EDGE_CURVE('',#20731,#23189,#23191,.T.); +#23189 = VERTEX_POINT('',#23190); +#23190 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#23191 = LINE('',#23192,#23193); +#23192 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#23193 = VECTOR('',#23194,1.); +#23194 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23195 = ORIENTED_EDGE('',*,*,#20730,.T.); +#23196 = ORIENTED_EDGE('',*,*,#23197,.T.); +#23197 = EDGE_CURVE('',#20733,#23198,#23200,.T.); +#23198 = VERTEX_POINT('',#23199); +#23199 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#23200 = LINE('',#23201,#23202); +#23201 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#23202 = VECTOR('',#23203,1.); +#23203 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23204 = ORIENTED_EDGE('',*,*,#23205,.F.); +#23205 = EDGE_CURVE('',#23189,#23198,#23206,.T.); +#23206 = LINE('',#23207,#23208); +#23207 = CARTESIAN_POINT('',(0.3,-33.62,8.2)); +#23208 = VECTOR('',#23209,1.); +#23209 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23210 = PLANE('',#23211); +#23211 = AXIS2_PLACEMENT_3D('',#23212,#23213,#23214); +#23212 = CARTESIAN_POINT('',(0.45,-33.62,8.35)); +#23213 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23214 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23215 = ADVANCED_FACE('',(#23216),#23234,.T.); +#23216 = FACE_BOUND('',#23217,.T.); +#23217 = EDGE_LOOP('',(#23218,#23219,#23220,#23228)); +#23218 = ORIENTED_EDGE('',*,*,#23197,.F.); +#23219 = ORIENTED_EDGE('',*,*,#20756,.T.); +#23220 = ORIENTED_EDGE('',*,*,#23221,.T.); +#23221 = EDGE_CURVE('',#20749,#23222,#23224,.T.); +#23222 = VERTEX_POINT('',#23223); +#23223 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#23224 = LINE('',#23225,#23226); +#23225 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#23226 = VECTOR('',#23227,1.); +#23227 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23228 = ORIENTED_EDGE('',*,*,#23229,.F.); +#23229 = EDGE_CURVE('',#23198,#23222,#23230,.T.); +#23230 = LINE('',#23231,#23232); +#23231 = CARTESIAN_POINT('',(0.6,-32.72,8.2)); +#23232 = VECTOR('',#23233,1.); +#23233 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23234 = PLANE('',#23235); +#23235 = AXIS2_PLACEMENT_3D('',#23236,#23237,#23238); +#23236 = CARTESIAN_POINT('',(0.6,-32.57,8.35)); +#23237 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23238 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23239 = ADVANCED_FACE('',(#23240),#23258,.T.); +#23240 = FACE_BOUND('',#23241,.T.); +#23241 = EDGE_LOOP('',(#23242,#23243,#23244,#23252)); +#23242 = ORIENTED_EDGE('',*,*,#23221,.F.); +#23243 = ORIENTED_EDGE('',*,*,#20748,.T.); +#23244 = ORIENTED_EDGE('',*,*,#23245,.T.); +#23245 = EDGE_CURVE('',#20741,#23246,#23248,.T.); +#23246 = VERTEX_POINT('',#23247); +#23247 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#23248 = LINE('',#23249,#23250); +#23249 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#23250 = VECTOR('',#23251,1.); +#23251 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23252 = ORIENTED_EDGE('',*,*,#23253,.F.); +#23253 = EDGE_CURVE('',#23222,#23246,#23254,.T.); +#23254 = LINE('',#23255,#23256); +#23255 = CARTESIAN_POINT('',(-0.3,-32.42,8.2)); +#23256 = VECTOR('',#23257,1.); +#23257 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23258 = PLANE('',#23259); +#23259 = AXIS2_PLACEMENT_3D('',#23260,#23261,#23262); +#23260 = CARTESIAN_POINT('',(-0.45,-32.42,8.35)); +#23261 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23262 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23263 = ADVANCED_FACE('',(#23264),#23275,.T.); +#23264 = FACE_BOUND('',#23265,.T.); +#23265 = EDGE_LOOP('',(#23266,#23267,#23268,#23269)); +#23266 = ORIENTED_EDGE('',*,*,#23245,.F.); +#23267 = ORIENTED_EDGE('',*,*,#20740,.T.); +#23268 = ORIENTED_EDGE('',*,*,#23188,.T.); +#23269 = ORIENTED_EDGE('',*,*,#23270,.F.); +#23270 = EDGE_CURVE('',#23246,#23189,#23271,.T.); +#23271 = LINE('',#23272,#23273); +#23272 = CARTESIAN_POINT('',(-0.6,-33.32,8.2)); +#23273 = VECTOR('',#23274,1.); +#23274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23275 = PLANE('',#23276); +#23276 = AXIS2_PLACEMENT_3D('',#23277,#23278,#23279); +#23277 = CARTESIAN_POINT('',(-0.6,-33.47,8.35)); +#23278 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23279 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23280 = ADVANCED_FACE('',(#23281),#23306,.T.); +#23281 = FACE_BOUND('',#23282,.T.); +#23282 = EDGE_LOOP('',(#23283,#23291,#23292,#23300)); +#23283 = ORIENTED_EDGE('',*,*,#23284,.F.); +#23284 = EDGE_CURVE('',#20765,#23285,#23287,.T.); +#23285 = VERTEX_POINT('',#23286); +#23286 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#23287 = LINE('',#23288,#23289); +#23288 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#23289 = VECTOR('',#23290,1.); +#23290 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23291 = ORIENTED_EDGE('',*,*,#20764,.T.); +#23292 = ORIENTED_EDGE('',*,*,#23293,.T.); +#23293 = EDGE_CURVE('',#20767,#23294,#23296,.T.); +#23294 = VERTEX_POINT('',#23295); +#23295 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#23296 = LINE('',#23297,#23298); +#23297 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#23298 = VECTOR('',#23299,1.); +#23299 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23300 = ORIENTED_EDGE('',*,*,#23301,.F.); +#23301 = EDGE_CURVE('',#23285,#23294,#23302,.T.); +#23302 = LINE('',#23303,#23304); +#23303 = CARTESIAN_POINT('',(0.3,-31.08,8.2)); +#23304 = VECTOR('',#23305,1.); +#23305 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23306 = PLANE('',#23307); +#23307 = AXIS2_PLACEMENT_3D('',#23308,#23309,#23310); +#23308 = CARTESIAN_POINT('',(0.45,-31.08,8.35)); +#23309 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23310 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23311 = ADVANCED_FACE('',(#23312),#23330,.T.); +#23312 = FACE_BOUND('',#23313,.T.); +#23313 = EDGE_LOOP('',(#23314,#23315,#23316,#23324)); +#23314 = ORIENTED_EDGE('',*,*,#23293,.F.); +#23315 = ORIENTED_EDGE('',*,*,#20790,.T.); +#23316 = ORIENTED_EDGE('',*,*,#23317,.T.); +#23317 = EDGE_CURVE('',#20783,#23318,#23320,.T.); +#23318 = VERTEX_POINT('',#23319); +#23319 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#23320 = LINE('',#23321,#23322); +#23321 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#23322 = VECTOR('',#23323,1.); +#23323 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23324 = ORIENTED_EDGE('',*,*,#23325,.F.); +#23325 = EDGE_CURVE('',#23294,#23318,#23326,.T.); +#23326 = LINE('',#23327,#23328); +#23327 = CARTESIAN_POINT('',(0.6,-30.18,8.2)); +#23328 = VECTOR('',#23329,1.); +#23329 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23330 = PLANE('',#23331); +#23331 = AXIS2_PLACEMENT_3D('',#23332,#23333,#23334); +#23332 = CARTESIAN_POINT('',(0.6,-30.03,8.35)); +#23333 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23334 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23335 = ADVANCED_FACE('',(#23336),#23354,.T.); +#23336 = FACE_BOUND('',#23337,.T.); +#23337 = EDGE_LOOP('',(#23338,#23339,#23340,#23348)); +#23338 = ORIENTED_EDGE('',*,*,#23317,.F.); +#23339 = ORIENTED_EDGE('',*,*,#20782,.T.); +#23340 = ORIENTED_EDGE('',*,*,#23341,.T.); +#23341 = EDGE_CURVE('',#20775,#23342,#23344,.T.); +#23342 = VERTEX_POINT('',#23343); +#23343 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#23344 = LINE('',#23345,#23346); +#23345 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#23346 = VECTOR('',#23347,1.); +#23347 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23348 = ORIENTED_EDGE('',*,*,#23349,.F.); +#23349 = EDGE_CURVE('',#23318,#23342,#23350,.T.); +#23350 = LINE('',#23351,#23352); +#23351 = CARTESIAN_POINT('',(-0.3,-29.88,8.2)); +#23352 = VECTOR('',#23353,1.); +#23353 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23354 = PLANE('',#23355); +#23355 = AXIS2_PLACEMENT_3D('',#23356,#23357,#23358); +#23356 = CARTESIAN_POINT('',(-0.45,-29.88,8.35)); +#23357 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23358 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23359 = ADVANCED_FACE('',(#23360),#23371,.T.); +#23360 = FACE_BOUND('',#23361,.T.); +#23361 = EDGE_LOOP('',(#23362,#23363,#23364,#23365)); +#23362 = ORIENTED_EDGE('',*,*,#23341,.F.); +#23363 = ORIENTED_EDGE('',*,*,#20774,.T.); +#23364 = ORIENTED_EDGE('',*,*,#23284,.T.); +#23365 = ORIENTED_EDGE('',*,*,#23366,.F.); +#23366 = EDGE_CURVE('',#23342,#23285,#23367,.T.); +#23367 = LINE('',#23368,#23369); +#23368 = CARTESIAN_POINT('',(-0.6,-30.78,8.2)); +#23369 = VECTOR('',#23370,1.); +#23370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23371 = PLANE('',#23372); +#23372 = AXIS2_PLACEMENT_3D('',#23373,#23374,#23375); +#23373 = CARTESIAN_POINT('',(-0.6,-30.93,8.35)); +#23374 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23375 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23376 = ADVANCED_FACE('',(#23377),#23402,.T.); +#23377 = FACE_BOUND('',#23378,.T.); +#23378 = EDGE_LOOP('',(#23379,#23387,#23388,#23396)); +#23379 = ORIENTED_EDGE('',*,*,#23380,.F.); +#23380 = EDGE_CURVE('',#20799,#23381,#23383,.T.); +#23381 = VERTEX_POINT('',#23382); +#23382 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#23383 = LINE('',#23384,#23385); +#23384 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#23385 = VECTOR('',#23386,1.); +#23386 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23387 = ORIENTED_EDGE('',*,*,#20798,.T.); +#23388 = ORIENTED_EDGE('',*,*,#23389,.T.); +#23389 = EDGE_CURVE('',#20801,#23390,#23392,.T.); +#23390 = VERTEX_POINT('',#23391); +#23391 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#23392 = LINE('',#23393,#23394); +#23393 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#23394 = VECTOR('',#23395,1.); +#23395 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23396 = ORIENTED_EDGE('',*,*,#23397,.F.); +#23397 = EDGE_CURVE('',#23381,#23390,#23398,.T.); +#23398 = LINE('',#23399,#23400); +#23399 = CARTESIAN_POINT('',(0.3,-28.54,8.2)); +#23400 = VECTOR('',#23401,1.); +#23401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23402 = PLANE('',#23403); +#23403 = AXIS2_PLACEMENT_3D('',#23404,#23405,#23406); +#23404 = CARTESIAN_POINT('',(0.45,-28.54,8.35)); +#23405 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23406 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23407 = ADVANCED_FACE('',(#23408),#23426,.T.); +#23408 = FACE_BOUND('',#23409,.T.); +#23409 = EDGE_LOOP('',(#23410,#23411,#23412,#23420)); +#23410 = ORIENTED_EDGE('',*,*,#23389,.F.); +#23411 = ORIENTED_EDGE('',*,*,#20824,.T.); +#23412 = ORIENTED_EDGE('',*,*,#23413,.T.); +#23413 = EDGE_CURVE('',#20817,#23414,#23416,.T.); +#23414 = VERTEX_POINT('',#23415); +#23415 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#23416 = LINE('',#23417,#23418); +#23417 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#23418 = VECTOR('',#23419,1.); +#23419 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23420 = ORIENTED_EDGE('',*,*,#23421,.F.); +#23421 = EDGE_CURVE('',#23390,#23414,#23422,.T.); +#23422 = LINE('',#23423,#23424); +#23423 = CARTESIAN_POINT('',(0.6,-27.64,8.2)); +#23424 = VECTOR('',#23425,1.); +#23425 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23426 = PLANE('',#23427); +#23427 = AXIS2_PLACEMENT_3D('',#23428,#23429,#23430); +#23428 = CARTESIAN_POINT('',(0.6,-27.49,8.35)); +#23429 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23430 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23431 = ADVANCED_FACE('',(#23432),#23450,.T.); +#23432 = FACE_BOUND('',#23433,.T.); +#23433 = EDGE_LOOP('',(#23434,#23435,#23436,#23444)); +#23434 = ORIENTED_EDGE('',*,*,#23413,.F.); +#23435 = ORIENTED_EDGE('',*,*,#20816,.T.); +#23436 = ORIENTED_EDGE('',*,*,#23437,.T.); +#23437 = EDGE_CURVE('',#20809,#23438,#23440,.T.); +#23438 = VERTEX_POINT('',#23439); +#23439 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#23440 = LINE('',#23441,#23442); +#23441 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#23442 = VECTOR('',#23443,1.); +#23443 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23444 = ORIENTED_EDGE('',*,*,#23445,.F.); +#23445 = EDGE_CURVE('',#23414,#23438,#23446,.T.); +#23446 = LINE('',#23447,#23448); +#23447 = CARTESIAN_POINT('',(-0.3,-27.34,8.2)); +#23448 = VECTOR('',#23449,1.); +#23449 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23450 = PLANE('',#23451); +#23451 = AXIS2_PLACEMENT_3D('',#23452,#23453,#23454); +#23452 = CARTESIAN_POINT('',(-0.45,-27.34,8.35)); +#23453 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23454 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23455 = ADVANCED_FACE('',(#23456),#23467,.T.); +#23456 = FACE_BOUND('',#23457,.T.); +#23457 = EDGE_LOOP('',(#23458,#23459,#23460,#23461)); +#23458 = ORIENTED_EDGE('',*,*,#23437,.F.); +#23459 = ORIENTED_EDGE('',*,*,#20808,.T.); +#23460 = ORIENTED_EDGE('',*,*,#23380,.T.); +#23461 = ORIENTED_EDGE('',*,*,#23462,.F.); +#23462 = EDGE_CURVE('',#23438,#23381,#23463,.T.); +#23463 = LINE('',#23464,#23465); +#23464 = CARTESIAN_POINT('',(-0.6,-28.24,8.2)); +#23465 = VECTOR('',#23466,1.); +#23466 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23467 = PLANE('',#23468); +#23468 = AXIS2_PLACEMENT_3D('',#23469,#23470,#23471); +#23469 = CARTESIAN_POINT('',(-0.6,-28.39,8.35)); +#23470 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23471 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23472 = ADVANCED_FACE('',(#23473),#23498,.T.); +#23473 = FACE_BOUND('',#23474,.T.); +#23474 = EDGE_LOOP('',(#23475,#23483,#23484,#23492)); +#23475 = ORIENTED_EDGE('',*,*,#23476,.F.); +#23476 = EDGE_CURVE('',#20833,#23477,#23479,.T.); +#23477 = VERTEX_POINT('',#23478); +#23478 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#23479 = LINE('',#23480,#23481); +#23480 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#23481 = VECTOR('',#23482,1.); +#23482 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23483 = ORIENTED_EDGE('',*,*,#20832,.T.); +#23484 = ORIENTED_EDGE('',*,*,#23485,.T.); +#23485 = EDGE_CURVE('',#20835,#23486,#23488,.T.); +#23486 = VERTEX_POINT('',#23487); +#23487 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#23488 = LINE('',#23489,#23490); +#23489 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#23490 = VECTOR('',#23491,1.); +#23491 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23492 = ORIENTED_EDGE('',*,*,#23493,.F.); +#23493 = EDGE_CURVE('',#23477,#23486,#23494,.T.); +#23494 = LINE('',#23495,#23496); +#23495 = CARTESIAN_POINT('',(0.3,-26.,8.2)); +#23496 = VECTOR('',#23497,1.); +#23497 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23498 = PLANE('',#23499); +#23499 = AXIS2_PLACEMENT_3D('',#23500,#23501,#23502); +#23500 = CARTESIAN_POINT('',(0.45,-26.,8.35)); +#23501 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23502 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23503 = ADVANCED_FACE('',(#23504),#23522,.T.); +#23504 = FACE_BOUND('',#23505,.T.); +#23505 = EDGE_LOOP('',(#23506,#23507,#23508,#23516)); +#23506 = ORIENTED_EDGE('',*,*,#23485,.F.); +#23507 = ORIENTED_EDGE('',*,*,#20858,.T.); +#23508 = ORIENTED_EDGE('',*,*,#23509,.T.); +#23509 = EDGE_CURVE('',#20851,#23510,#23512,.T.); +#23510 = VERTEX_POINT('',#23511); +#23511 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#23512 = LINE('',#23513,#23514); +#23513 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#23514 = VECTOR('',#23515,1.); +#23515 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23516 = ORIENTED_EDGE('',*,*,#23517,.F.); +#23517 = EDGE_CURVE('',#23486,#23510,#23518,.T.); +#23518 = LINE('',#23519,#23520); +#23519 = CARTESIAN_POINT('',(0.6,-25.1,8.2)); +#23520 = VECTOR('',#23521,1.); +#23521 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23522 = PLANE('',#23523); +#23523 = AXIS2_PLACEMENT_3D('',#23524,#23525,#23526); +#23524 = CARTESIAN_POINT('',(0.6,-24.95,8.35)); +#23525 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23526 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23527 = ADVANCED_FACE('',(#23528),#23546,.T.); +#23528 = FACE_BOUND('',#23529,.T.); +#23529 = EDGE_LOOP('',(#23530,#23531,#23532,#23540)); +#23530 = ORIENTED_EDGE('',*,*,#23509,.F.); +#23531 = ORIENTED_EDGE('',*,*,#20850,.T.); +#23532 = ORIENTED_EDGE('',*,*,#23533,.T.); +#23533 = EDGE_CURVE('',#20843,#23534,#23536,.T.); +#23534 = VERTEX_POINT('',#23535); +#23535 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#23536 = LINE('',#23537,#23538); +#23537 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#23538 = VECTOR('',#23539,1.); +#23539 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23540 = ORIENTED_EDGE('',*,*,#23541,.F.); +#23541 = EDGE_CURVE('',#23510,#23534,#23542,.T.); +#23542 = LINE('',#23543,#23544); +#23543 = CARTESIAN_POINT('',(-0.3,-24.8,8.2)); +#23544 = VECTOR('',#23545,1.); +#23545 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23546 = PLANE('',#23547); +#23547 = AXIS2_PLACEMENT_3D('',#23548,#23549,#23550); +#23548 = CARTESIAN_POINT('',(-0.45,-24.8,8.35)); +#23549 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23550 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23551 = ADVANCED_FACE('',(#23552),#23563,.T.); +#23552 = FACE_BOUND('',#23553,.T.); +#23553 = EDGE_LOOP('',(#23554,#23555,#23556,#23557)); +#23554 = ORIENTED_EDGE('',*,*,#23533,.F.); +#23555 = ORIENTED_EDGE('',*,*,#20842,.T.); +#23556 = ORIENTED_EDGE('',*,*,#23476,.T.); +#23557 = ORIENTED_EDGE('',*,*,#23558,.F.); +#23558 = EDGE_CURVE('',#23534,#23477,#23559,.T.); +#23559 = LINE('',#23560,#23561); +#23560 = CARTESIAN_POINT('',(-0.6,-25.7,8.2)); +#23561 = VECTOR('',#23562,1.); +#23562 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23563 = PLANE('',#23564); +#23564 = AXIS2_PLACEMENT_3D('',#23565,#23566,#23567); +#23565 = CARTESIAN_POINT('',(-0.6,-25.85,8.35)); +#23566 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23567 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23568 = ADVANCED_FACE('',(#23569),#23594,.T.); +#23569 = FACE_BOUND('',#23570,.T.); +#23570 = EDGE_LOOP('',(#23571,#23579,#23580,#23588)); +#23571 = ORIENTED_EDGE('',*,*,#23572,.F.); +#23572 = EDGE_CURVE('',#20867,#23573,#23575,.T.); +#23573 = VERTEX_POINT('',#23574); +#23574 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#23575 = LINE('',#23576,#23577); +#23576 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#23577 = VECTOR('',#23578,1.); +#23578 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23579 = ORIENTED_EDGE('',*,*,#20866,.T.); +#23580 = ORIENTED_EDGE('',*,*,#23581,.T.); +#23581 = EDGE_CURVE('',#20869,#23582,#23584,.T.); +#23582 = VERTEX_POINT('',#23583); +#23583 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#23584 = LINE('',#23585,#23586); +#23585 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#23586 = VECTOR('',#23587,1.); +#23587 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23588 = ORIENTED_EDGE('',*,*,#23589,.F.); +#23589 = EDGE_CURVE('',#23573,#23582,#23590,.T.); +#23590 = LINE('',#23591,#23592); +#23591 = CARTESIAN_POINT('',(0.3,-23.46,8.2)); +#23592 = VECTOR('',#23593,1.); +#23593 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23594 = PLANE('',#23595); +#23595 = AXIS2_PLACEMENT_3D('',#23596,#23597,#23598); +#23596 = CARTESIAN_POINT('',(0.45,-23.46,8.35)); +#23597 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23598 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23599 = ADVANCED_FACE('',(#23600),#23618,.T.); +#23600 = FACE_BOUND('',#23601,.T.); +#23601 = EDGE_LOOP('',(#23602,#23603,#23604,#23612)); +#23602 = ORIENTED_EDGE('',*,*,#23581,.F.); +#23603 = ORIENTED_EDGE('',*,*,#20892,.T.); +#23604 = ORIENTED_EDGE('',*,*,#23605,.T.); +#23605 = EDGE_CURVE('',#20885,#23606,#23608,.T.); +#23606 = VERTEX_POINT('',#23607); +#23607 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#23608 = LINE('',#23609,#23610); +#23609 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#23610 = VECTOR('',#23611,1.); +#23611 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23612 = ORIENTED_EDGE('',*,*,#23613,.F.); +#23613 = EDGE_CURVE('',#23582,#23606,#23614,.T.); +#23614 = LINE('',#23615,#23616); +#23615 = CARTESIAN_POINT('',(0.6,-22.56,8.2)); +#23616 = VECTOR('',#23617,1.); +#23617 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23618 = PLANE('',#23619); +#23619 = AXIS2_PLACEMENT_3D('',#23620,#23621,#23622); +#23620 = CARTESIAN_POINT('',(0.6,-22.41,8.35)); +#23621 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23622 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23623 = ADVANCED_FACE('',(#23624),#23642,.T.); +#23624 = FACE_BOUND('',#23625,.T.); +#23625 = EDGE_LOOP('',(#23626,#23627,#23628,#23636)); +#23626 = ORIENTED_EDGE('',*,*,#23605,.F.); +#23627 = ORIENTED_EDGE('',*,*,#20884,.T.); +#23628 = ORIENTED_EDGE('',*,*,#23629,.T.); +#23629 = EDGE_CURVE('',#20877,#23630,#23632,.T.); +#23630 = VERTEX_POINT('',#23631); +#23631 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#23632 = LINE('',#23633,#23634); +#23633 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#23634 = VECTOR('',#23635,1.); +#23635 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23636 = ORIENTED_EDGE('',*,*,#23637,.F.); +#23637 = EDGE_CURVE('',#23606,#23630,#23638,.T.); +#23638 = LINE('',#23639,#23640); +#23639 = CARTESIAN_POINT('',(-0.3,-22.26,8.2)); +#23640 = VECTOR('',#23641,1.); +#23641 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23642 = PLANE('',#23643); +#23643 = AXIS2_PLACEMENT_3D('',#23644,#23645,#23646); +#23644 = CARTESIAN_POINT('',(-0.45,-22.26,8.35)); +#23645 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23646 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23647 = ADVANCED_FACE('',(#23648),#23659,.T.); +#23648 = FACE_BOUND('',#23649,.T.); +#23649 = EDGE_LOOP('',(#23650,#23651,#23652,#23653)); +#23650 = ORIENTED_EDGE('',*,*,#23629,.F.); +#23651 = ORIENTED_EDGE('',*,*,#20876,.T.); +#23652 = ORIENTED_EDGE('',*,*,#23572,.T.); +#23653 = ORIENTED_EDGE('',*,*,#23654,.F.); +#23654 = EDGE_CURVE('',#23630,#23573,#23655,.T.); +#23655 = LINE('',#23656,#23657); +#23656 = CARTESIAN_POINT('',(-0.6,-23.16,8.2)); +#23657 = VECTOR('',#23658,1.); +#23658 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23659 = PLANE('',#23660); +#23660 = AXIS2_PLACEMENT_3D('',#23661,#23662,#23663); +#23661 = CARTESIAN_POINT('',(-0.6,-23.31,8.35)); +#23662 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23663 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23664 = ADVANCED_FACE('',(#23665),#23690,.T.); +#23665 = FACE_BOUND('',#23666,.T.); +#23666 = EDGE_LOOP('',(#23667,#23675,#23676,#23684)); +#23667 = ORIENTED_EDGE('',*,*,#23668,.F.); +#23668 = EDGE_CURVE('',#20901,#23669,#23671,.T.); +#23669 = VERTEX_POINT('',#23670); +#23670 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#23671 = LINE('',#23672,#23673); +#23672 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#23673 = VECTOR('',#23674,1.); +#23674 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23675 = ORIENTED_EDGE('',*,*,#20900,.T.); +#23676 = ORIENTED_EDGE('',*,*,#23677,.T.); +#23677 = EDGE_CURVE('',#20903,#23678,#23680,.T.); +#23678 = VERTEX_POINT('',#23679); +#23679 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#23680 = LINE('',#23681,#23682); +#23681 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#23682 = VECTOR('',#23683,1.); +#23683 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23684 = ORIENTED_EDGE('',*,*,#23685,.F.); +#23685 = EDGE_CURVE('',#23669,#23678,#23686,.T.); +#23686 = LINE('',#23687,#23688); +#23687 = CARTESIAN_POINT('',(0.3,-20.92,8.2)); +#23688 = VECTOR('',#23689,1.); +#23689 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23690 = PLANE('',#23691); +#23691 = AXIS2_PLACEMENT_3D('',#23692,#23693,#23694); +#23692 = CARTESIAN_POINT('',(0.45,-20.92,8.35)); +#23693 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23694 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23695 = ADVANCED_FACE('',(#23696),#23714,.T.); +#23696 = FACE_BOUND('',#23697,.T.); +#23697 = EDGE_LOOP('',(#23698,#23699,#23700,#23708)); +#23698 = ORIENTED_EDGE('',*,*,#23677,.F.); +#23699 = ORIENTED_EDGE('',*,*,#20926,.T.); +#23700 = ORIENTED_EDGE('',*,*,#23701,.T.); +#23701 = EDGE_CURVE('',#20919,#23702,#23704,.T.); +#23702 = VERTEX_POINT('',#23703); +#23703 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#23704 = LINE('',#23705,#23706); +#23705 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#23706 = VECTOR('',#23707,1.); +#23707 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23708 = ORIENTED_EDGE('',*,*,#23709,.F.); +#23709 = EDGE_CURVE('',#23678,#23702,#23710,.T.); +#23710 = LINE('',#23711,#23712); +#23711 = CARTESIAN_POINT('',(0.6,-20.02,8.2)); +#23712 = VECTOR('',#23713,1.); +#23713 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23714 = PLANE('',#23715); +#23715 = AXIS2_PLACEMENT_3D('',#23716,#23717,#23718); +#23716 = CARTESIAN_POINT('',(0.6,-19.87,8.35)); +#23717 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23718 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23719 = ADVANCED_FACE('',(#23720),#23738,.T.); +#23720 = FACE_BOUND('',#23721,.T.); +#23721 = EDGE_LOOP('',(#23722,#23723,#23724,#23732)); +#23722 = ORIENTED_EDGE('',*,*,#23701,.F.); +#23723 = ORIENTED_EDGE('',*,*,#20918,.T.); +#23724 = ORIENTED_EDGE('',*,*,#23725,.T.); +#23725 = EDGE_CURVE('',#20911,#23726,#23728,.T.); +#23726 = VERTEX_POINT('',#23727); +#23727 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#23728 = LINE('',#23729,#23730); +#23729 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#23730 = VECTOR('',#23731,1.); +#23731 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23732 = ORIENTED_EDGE('',*,*,#23733,.F.); +#23733 = EDGE_CURVE('',#23702,#23726,#23734,.T.); +#23734 = LINE('',#23735,#23736); +#23735 = CARTESIAN_POINT('',(-0.3,-19.72,8.2)); +#23736 = VECTOR('',#23737,1.); +#23737 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23738 = PLANE('',#23739); +#23739 = AXIS2_PLACEMENT_3D('',#23740,#23741,#23742); +#23740 = CARTESIAN_POINT('',(-0.45,-19.72,8.35)); +#23741 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23742 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23743 = ADVANCED_FACE('',(#23744),#23755,.T.); +#23744 = FACE_BOUND('',#23745,.T.); +#23745 = EDGE_LOOP('',(#23746,#23747,#23748,#23749)); +#23746 = ORIENTED_EDGE('',*,*,#23725,.F.); +#23747 = ORIENTED_EDGE('',*,*,#20910,.T.); +#23748 = ORIENTED_EDGE('',*,*,#23668,.T.); +#23749 = ORIENTED_EDGE('',*,*,#23750,.F.); +#23750 = EDGE_CURVE('',#23726,#23669,#23751,.T.); +#23751 = LINE('',#23752,#23753); +#23752 = CARTESIAN_POINT('',(-0.6,-20.62,8.2)); +#23753 = VECTOR('',#23754,1.); +#23754 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23755 = PLANE('',#23756); +#23756 = AXIS2_PLACEMENT_3D('',#23757,#23758,#23759); +#23757 = CARTESIAN_POINT('',(-0.6,-20.77,8.35)); +#23758 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23759 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23760 = ADVANCED_FACE('',(#23761),#23786,.T.); +#23761 = FACE_BOUND('',#23762,.T.); +#23762 = EDGE_LOOP('',(#23763,#23771,#23772,#23780)); +#23763 = ORIENTED_EDGE('',*,*,#23764,.F.); +#23764 = EDGE_CURVE('',#20935,#23765,#23767,.T.); +#23765 = VERTEX_POINT('',#23766); +#23766 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#23767 = LINE('',#23768,#23769); +#23768 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#23769 = VECTOR('',#23770,1.); +#23770 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23771 = ORIENTED_EDGE('',*,*,#20934,.T.); +#23772 = ORIENTED_EDGE('',*,*,#23773,.T.); +#23773 = EDGE_CURVE('',#20937,#23774,#23776,.T.); +#23774 = VERTEX_POINT('',#23775); +#23775 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#23776 = LINE('',#23777,#23778); +#23777 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#23778 = VECTOR('',#23779,1.); +#23779 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23780 = ORIENTED_EDGE('',*,*,#23781,.F.); +#23781 = EDGE_CURVE('',#23765,#23774,#23782,.T.); +#23782 = LINE('',#23783,#23784); +#23783 = CARTESIAN_POINT('',(0.3,-18.38,8.2)); +#23784 = VECTOR('',#23785,1.); +#23785 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23786 = PLANE('',#23787); +#23787 = AXIS2_PLACEMENT_3D('',#23788,#23789,#23790); +#23788 = CARTESIAN_POINT('',(0.45,-18.38,8.35)); +#23789 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23790 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23791 = ADVANCED_FACE('',(#23792),#23810,.T.); +#23792 = FACE_BOUND('',#23793,.T.); +#23793 = EDGE_LOOP('',(#23794,#23795,#23796,#23804)); +#23794 = ORIENTED_EDGE('',*,*,#23773,.F.); +#23795 = ORIENTED_EDGE('',*,*,#20960,.T.); +#23796 = ORIENTED_EDGE('',*,*,#23797,.T.); +#23797 = EDGE_CURVE('',#20953,#23798,#23800,.T.); +#23798 = VERTEX_POINT('',#23799); +#23799 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#23800 = LINE('',#23801,#23802); +#23801 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#23802 = VECTOR('',#23803,1.); +#23803 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23804 = ORIENTED_EDGE('',*,*,#23805,.F.); +#23805 = EDGE_CURVE('',#23774,#23798,#23806,.T.); +#23806 = LINE('',#23807,#23808); +#23807 = CARTESIAN_POINT('',(0.6,-17.48,8.2)); +#23808 = VECTOR('',#23809,1.); +#23809 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23810 = PLANE('',#23811); +#23811 = AXIS2_PLACEMENT_3D('',#23812,#23813,#23814); +#23812 = CARTESIAN_POINT('',(0.6,-17.33,8.35)); +#23813 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23814 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23815 = ADVANCED_FACE('',(#23816),#23834,.T.); +#23816 = FACE_BOUND('',#23817,.T.); +#23817 = EDGE_LOOP('',(#23818,#23819,#23820,#23828)); +#23818 = ORIENTED_EDGE('',*,*,#23797,.F.); +#23819 = ORIENTED_EDGE('',*,*,#20952,.T.); +#23820 = ORIENTED_EDGE('',*,*,#23821,.T.); +#23821 = EDGE_CURVE('',#20945,#23822,#23824,.T.); +#23822 = VERTEX_POINT('',#23823); +#23823 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#23824 = LINE('',#23825,#23826); +#23825 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#23826 = VECTOR('',#23827,1.); +#23827 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23828 = ORIENTED_EDGE('',*,*,#23829,.F.); +#23829 = EDGE_CURVE('',#23798,#23822,#23830,.T.); +#23830 = LINE('',#23831,#23832); +#23831 = CARTESIAN_POINT('',(-0.3,-17.18,8.2)); +#23832 = VECTOR('',#23833,1.); +#23833 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23834 = PLANE('',#23835); +#23835 = AXIS2_PLACEMENT_3D('',#23836,#23837,#23838); +#23836 = CARTESIAN_POINT('',(-0.45,-17.18,8.35)); +#23837 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23838 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23839 = ADVANCED_FACE('',(#23840),#23851,.T.); +#23840 = FACE_BOUND('',#23841,.T.); +#23841 = EDGE_LOOP('',(#23842,#23843,#23844,#23845)); +#23842 = ORIENTED_EDGE('',*,*,#23821,.F.); +#23843 = ORIENTED_EDGE('',*,*,#20944,.T.); +#23844 = ORIENTED_EDGE('',*,*,#23764,.T.); +#23845 = ORIENTED_EDGE('',*,*,#23846,.F.); +#23846 = EDGE_CURVE('',#23822,#23765,#23847,.T.); +#23847 = LINE('',#23848,#23849); +#23848 = CARTESIAN_POINT('',(-0.6,-18.08,8.2)); +#23849 = VECTOR('',#23850,1.); +#23850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23851 = PLANE('',#23852); +#23852 = AXIS2_PLACEMENT_3D('',#23853,#23854,#23855); +#23853 = CARTESIAN_POINT('',(-0.6,-18.23,8.35)); +#23854 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23855 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23856 = ADVANCED_FACE('',(#23857),#23882,.T.); +#23857 = FACE_BOUND('',#23858,.T.); +#23858 = EDGE_LOOP('',(#23859,#23867,#23868,#23876)); +#23859 = ORIENTED_EDGE('',*,*,#23860,.F.); +#23860 = EDGE_CURVE('',#20969,#23861,#23863,.T.); +#23861 = VERTEX_POINT('',#23862); +#23862 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#23863 = LINE('',#23864,#23865); +#23864 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#23865 = VECTOR('',#23866,1.); +#23866 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23867 = ORIENTED_EDGE('',*,*,#20968,.T.); +#23868 = ORIENTED_EDGE('',*,*,#23869,.T.); +#23869 = EDGE_CURVE('',#20971,#23870,#23872,.T.); +#23870 = VERTEX_POINT('',#23871); +#23871 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#23872 = LINE('',#23873,#23874); +#23873 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#23874 = VECTOR('',#23875,1.); +#23875 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23876 = ORIENTED_EDGE('',*,*,#23877,.F.); +#23877 = EDGE_CURVE('',#23861,#23870,#23878,.T.); +#23878 = LINE('',#23879,#23880); +#23879 = CARTESIAN_POINT('',(0.3,-15.84,8.2)); +#23880 = VECTOR('',#23881,1.); +#23881 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23882 = PLANE('',#23883); +#23883 = AXIS2_PLACEMENT_3D('',#23884,#23885,#23886); +#23884 = CARTESIAN_POINT('',(0.45,-15.84,8.35)); +#23885 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23886 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23887 = ADVANCED_FACE('',(#23888),#23906,.T.); +#23888 = FACE_BOUND('',#23889,.T.); +#23889 = EDGE_LOOP('',(#23890,#23891,#23892,#23900)); +#23890 = ORIENTED_EDGE('',*,*,#23869,.F.); +#23891 = ORIENTED_EDGE('',*,*,#20994,.T.); +#23892 = ORIENTED_EDGE('',*,*,#23893,.T.); +#23893 = EDGE_CURVE('',#20987,#23894,#23896,.T.); +#23894 = VERTEX_POINT('',#23895); +#23895 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#23896 = LINE('',#23897,#23898); +#23897 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#23898 = VECTOR('',#23899,1.); +#23899 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23900 = ORIENTED_EDGE('',*,*,#23901,.F.); +#23901 = EDGE_CURVE('',#23870,#23894,#23902,.T.); +#23902 = LINE('',#23903,#23904); +#23903 = CARTESIAN_POINT('',(0.6,-14.94,8.2)); +#23904 = VECTOR('',#23905,1.); +#23905 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#23906 = PLANE('',#23907); +#23907 = AXIS2_PLACEMENT_3D('',#23908,#23909,#23910); +#23908 = CARTESIAN_POINT('',(0.6,-14.79,8.35)); +#23909 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#23910 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#23911 = ADVANCED_FACE('',(#23912),#23930,.T.); +#23912 = FACE_BOUND('',#23913,.T.); +#23913 = EDGE_LOOP('',(#23914,#23915,#23916,#23924)); +#23914 = ORIENTED_EDGE('',*,*,#23893,.F.); +#23915 = ORIENTED_EDGE('',*,*,#20986,.T.); +#23916 = ORIENTED_EDGE('',*,*,#23917,.T.); +#23917 = EDGE_CURVE('',#20979,#23918,#23920,.T.); +#23918 = VERTEX_POINT('',#23919); +#23919 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#23920 = LINE('',#23921,#23922); +#23921 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#23922 = VECTOR('',#23923,1.); +#23923 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23924 = ORIENTED_EDGE('',*,*,#23925,.F.); +#23925 = EDGE_CURVE('',#23894,#23918,#23926,.T.); +#23926 = LINE('',#23927,#23928); +#23927 = CARTESIAN_POINT('',(-0.3,-14.64,8.2)); +#23928 = VECTOR('',#23929,1.); +#23929 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23930 = PLANE('',#23931); +#23931 = AXIS2_PLACEMENT_3D('',#23932,#23933,#23934); +#23932 = CARTESIAN_POINT('',(-0.45,-14.64,8.35)); +#23933 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#23934 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#23935 = ADVANCED_FACE('',(#23936),#23947,.T.); +#23936 = FACE_BOUND('',#23937,.T.); +#23937 = EDGE_LOOP('',(#23938,#23939,#23940,#23941)); +#23938 = ORIENTED_EDGE('',*,*,#23917,.F.); +#23939 = ORIENTED_EDGE('',*,*,#20978,.T.); +#23940 = ORIENTED_EDGE('',*,*,#23860,.T.); +#23941 = ORIENTED_EDGE('',*,*,#23942,.F.); +#23942 = EDGE_CURVE('',#23918,#23861,#23943,.T.); +#23943 = LINE('',#23944,#23945); +#23944 = CARTESIAN_POINT('',(-0.6,-15.54,8.2)); +#23945 = VECTOR('',#23946,1.); +#23946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#23947 = PLANE('',#23948); +#23948 = AXIS2_PLACEMENT_3D('',#23949,#23950,#23951); +#23949 = CARTESIAN_POINT('',(-0.6,-15.69,8.35)); +#23950 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#23951 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#23952 = ADVANCED_FACE('',(#23953),#23978,.T.); +#23953 = FACE_BOUND('',#23954,.T.); +#23954 = EDGE_LOOP('',(#23955,#23963,#23964,#23972)); +#23955 = ORIENTED_EDGE('',*,*,#23956,.F.); +#23956 = EDGE_CURVE('',#21003,#23957,#23959,.T.); +#23957 = VERTEX_POINT('',#23958); +#23958 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#23959 = LINE('',#23960,#23961); +#23960 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#23961 = VECTOR('',#23962,1.); +#23962 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23963 = ORIENTED_EDGE('',*,*,#21002,.T.); +#23964 = ORIENTED_EDGE('',*,*,#23965,.T.); +#23965 = EDGE_CURVE('',#21005,#23966,#23968,.T.); +#23966 = VERTEX_POINT('',#23967); +#23967 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#23968 = LINE('',#23969,#23970); +#23969 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#23970 = VECTOR('',#23971,1.); +#23971 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23972 = ORIENTED_EDGE('',*,*,#23973,.F.); +#23973 = EDGE_CURVE('',#23957,#23966,#23974,.T.); +#23974 = LINE('',#23975,#23976); +#23975 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#23976 = VECTOR('',#23977,1.); +#23977 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23978 = PLANE('',#23979); +#23979 = AXIS2_PLACEMENT_3D('',#23980,#23981,#23982); +#23980 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#23981 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#23982 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#23983 = ADVANCED_FACE('',(#23984),#24002,.T.); +#23984 = FACE_BOUND('',#23985,.T.); +#23985 = EDGE_LOOP('',(#23986,#23987,#23988,#23996)); +#23986 = ORIENTED_EDGE('',*,*,#23965,.F.); +#23987 = ORIENTED_EDGE('',*,*,#21028,.T.); +#23988 = ORIENTED_EDGE('',*,*,#23989,.T.); +#23989 = EDGE_CURVE('',#21021,#23990,#23992,.T.); +#23990 = VERTEX_POINT('',#23991); +#23991 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#23992 = LINE('',#23993,#23994); +#23993 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#23994 = VECTOR('',#23995,1.); +#23995 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23996 = ORIENTED_EDGE('',*,*,#23997,.F.); +#23997 = EDGE_CURVE('',#23966,#23990,#23998,.T.); +#23998 = LINE('',#23999,#24000); +#23999 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#24000 = VECTOR('',#24001,1.); +#24001 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24002 = PLANE('',#24003); +#24003 = AXIS2_PLACEMENT_3D('',#24004,#24005,#24006); +#24004 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#24005 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24006 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24007 = ADVANCED_FACE('',(#24008),#24026,.T.); +#24008 = FACE_BOUND('',#24009,.T.); +#24009 = EDGE_LOOP('',(#24010,#24011,#24012,#24020)); +#24010 = ORIENTED_EDGE('',*,*,#23989,.F.); +#24011 = ORIENTED_EDGE('',*,*,#21020,.T.); +#24012 = ORIENTED_EDGE('',*,*,#24013,.T.); +#24013 = EDGE_CURVE('',#21013,#24014,#24016,.T.); +#24014 = VERTEX_POINT('',#24015); +#24015 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#24016 = LINE('',#24017,#24018); +#24017 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#24018 = VECTOR('',#24019,1.); +#24019 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24020 = ORIENTED_EDGE('',*,*,#24021,.F.); +#24021 = EDGE_CURVE('',#23990,#24014,#24022,.T.); +#24022 = LINE('',#24023,#24024); +#24023 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#24024 = VECTOR('',#24025,1.); +#24025 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24026 = PLANE('',#24027); +#24027 = AXIS2_PLACEMENT_3D('',#24028,#24029,#24030); +#24028 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#24029 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24030 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24031 = ADVANCED_FACE('',(#24032),#24043,.T.); +#24032 = FACE_BOUND('',#24033,.T.); +#24033 = EDGE_LOOP('',(#24034,#24035,#24036,#24037)); +#24034 = ORIENTED_EDGE('',*,*,#24013,.F.); +#24035 = ORIENTED_EDGE('',*,*,#21012,.T.); +#24036 = ORIENTED_EDGE('',*,*,#23956,.T.); +#24037 = ORIENTED_EDGE('',*,*,#24038,.F.); +#24038 = EDGE_CURVE('',#24014,#23957,#24039,.T.); +#24039 = LINE('',#24040,#24041); +#24040 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#24041 = VECTOR('',#24042,1.); +#24042 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24043 = PLANE('',#24044); +#24044 = AXIS2_PLACEMENT_3D('',#24045,#24046,#24047); +#24045 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#24046 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24047 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24048 = ADVANCED_FACE('',(#24049),#24074,.T.); +#24049 = FACE_BOUND('',#24050,.T.); +#24050 = EDGE_LOOP('',(#24051,#24059,#24060,#24068)); +#24051 = ORIENTED_EDGE('',*,*,#24052,.F.); +#24052 = EDGE_CURVE('',#21037,#24053,#24055,.T.); +#24053 = VERTEX_POINT('',#24054); +#24054 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#24055 = LINE('',#24056,#24057); +#24056 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#24057 = VECTOR('',#24058,1.); +#24058 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24059 = ORIENTED_EDGE('',*,*,#21036,.T.); +#24060 = ORIENTED_EDGE('',*,*,#24061,.T.); +#24061 = EDGE_CURVE('',#21039,#24062,#24064,.T.); +#24062 = VERTEX_POINT('',#24063); +#24063 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#24064 = LINE('',#24065,#24066); +#24065 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#24066 = VECTOR('',#24067,1.); +#24067 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24068 = ORIENTED_EDGE('',*,*,#24069,.F.); +#24069 = EDGE_CURVE('',#24053,#24062,#24070,.T.); +#24070 = LINE('',#24071,#24072); +#24071 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#24072 = VECTOR('',#24073,1.); +#24073 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24074 = PLANE('',#24075); +#24075 = AXIS2_PLACEMENT_3D('',#24076,#24077,#24078); +#24076 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#24077 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24078 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24079 = ADVANCED_FACE('',(#24080),#24098,.T.); +#24080 = FACE_BOUND('',#24081,.T.); +#24081 = EDGE_LOOP('',(#24082,#24083,#24084,#24092)); +#24082 = ORIENTED_EDGE('',*,*,#24061,.F.); +#24083 = ORIENTED_EDGE('',*,*,#21062,.T.); +#24084 = ORIENTED_EDGE('',*,*,#24085,.T.); +#24085 = EDGE_CURVE('',#21055,#24086,#24088,.T.); +#24086 = VERTEX_POINT('',#24087); +#24087 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#24088 = LINE('',#24089,#24090); +#24089 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#24090 = VECTOR('',#24091,1.); +#24091 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24092 = ORIENTED_EDGE('',*,*,#24093,.F.); +#24093 = EDGE_CURVE('',#24062,#24086,#24094,.T.); +#24094 = LINE('',#24095,#24096); +#24095 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#24096 = VECTOR('',#24097,1.); +#24097 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24098 = PLANE('',#24099); +#24099 = AXIS2_PLACEMENT_3D('',#24100,#24101,#24102); +#24100 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#24101 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24102 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24103 = ADVANCED_FACE('',(#24104),#24122,.T.); +#24104 = FACE_BOUND('',#24105,.T.); +#24105 = EDGE_LOOP('',(#24106,#24107,#24108,#24116)); +#24106 = ORIENTED_EDGE('',*,*,#24085,.F.); +#24107 = ORIENTED_EDGE('',*,*,#21054,.T.); +#24108 = ORIENTED_EDGE('',*,*,#24109,.T.); +#24109 = EDGE_CURVE('',#21047,#24110,#24112,.T.); +#24110 = VERTEX_POINT('',#24111); +#24111 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#24112 = LINE('',#24113,#24114); +#24113 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#24114 = VECTOR('',#24115,1.); +#24115 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24116 = ORIENTED_EDGE('',*,*,#24117,.F.); +#24117 = EDGE_CURVE('',#24086,#24110,#24118,.T.); +#24118 = LINE('',#24119,#24120); +#24119 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#24120 = VECTOR('',#24121,1.); +#24121 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24122 = PLANE('',#24123); +#24123 = AXIS2_PLACEMENT_3D('',#24124,#24125,#24126); +#24124 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#24125 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24126 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24127 = ADVANCED_FACE('',(#24128),#24139,.T.); +#24128 = FACE_BOUND('',#24129,.T.); +#24129 = EDGE_LOOP('',(#24130,#24131,#24132,#24133)); +#24130 = ORIENTED_EDGE('',*,*,#24109,.F.); +#24131 = ORIENTED_EDGE('',*,*,#21046,.T.); +#24132 = ORIENTED_EDGE('',*,*,#24052,.T.); +#24133 = ORIENTED_EDGE('',*,*,#24134,.F.); +#24134 = EDGE_CURVE('',#24110,#24053,#24135,.T.); +#24135 = LINE('',#24136,#24137); +#24136 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#24137 = VECTOR('',#24138,1.); +#24138 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24139 = PLANE('',#24140); +#24140 = AXIS2_PLACEMENT_3D('',#24141,#24142,#24143); +#24141 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#24142 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24143 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24144 = ADVANCED_FACE('',(#24145),#24170,.T.); +#24145 = FACE_BOUND('',#24146,.T.); +#24146 = EDGE_LOOP('',(#24147,#24155,#24156,#24164)); +#24147 = ORIENTED_EDGE('',*,*,#24148,.F.); +#24148 = EDGE_CURVE('',#21071,#24149,#24151,.T.); +#24149 = VERTEX_POINT('',#24150); +#24150 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#24151 = LINE('',#24152,#24153); +#24152 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#24153 = VECTOR('',#24154,1.); +#24154 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24155 = ORIENTED_EDGE('',*,*,#21070,.T.); +#24156 = ORIENTED_EDGE('',*,*,#24157,.T.); +#24157 = EDGE_CURVE('',#21073,#24158,#24160,.T.); +#24158 = VERTEX_POINT('',#24159); +#24159 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#24160 = LINE('',#24161,#24162); +#24161 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#24162 = VECTOR('',#24163,1.); +#24163 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24164 = ORIENTED_EDGE('',*,*,#24165,.F.); +#24165 = EDGE_CURVE('',#24149,#24158,#24166,.T.); +#24166 = LINE('',#24167,#24168); +#24167 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#24168 = VECTOR('',#24169,1.); +#24169 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24170 = PLANE('',#24171); +#24171 = AXIS2_PLACEMENT_3D('',#24172,#24173,#24174); +#24172 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#24173 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24174 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24175 = ADVANCED_FACE('',(#24176),#24194,.T.); +#24176 = FACE_BOUND('',#24177,.T.); +#24177 = EDGE_LOOP('',(#24178,#24179,#24180,#24188)); +#24178 = ORIENTED_EDGE('',*,*,#24157,.F.); +#24179 = ORIENTED_EDGE('',*,*,#21096,.T.); +#24180 = ORIENTED_EDGE('',*,*,#24181,.T.); +#24181 = EDGE_CURVE('',#21089,#24182,#24184,.T.); +#24182 = VERTEX_POINT('',#24183); +#24183 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#24184 = LINE('',#24185,#24186); +#24185 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#24186 = VECTOR('',#24187,1.); +#24187 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24188 = ORIENTED_EDGE('',*,*,#24189,.F.); +#24189 = EDGE_CURVE('',#24158,#24182,#24190,.T.); +#24190 = LINE('',#24191,#24192); +#24191 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#24192 = VECTOR('',#24193,1.); +#24193 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24194 = PLANE('',#24195); +#24195 = AXIS2_PLACEMENT_3D('',#24196,#24197,#24198); +#24196 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#24197 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24198 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24199 = ADVANCED_FACE('',(#24200),#24218,.T.); +#24200 = FACE_BOUND('',#24201,.T.); +#24201 = EDGE_LOOP('',(#24202,#24203,#24204,#24212)); +#24202 = ORIENTED_EDGE('',*,*,#24181,.F.); +#24203 = ORIENTED_EDGE('',*,*,#21088,.T.); +#24204 = ORIENTED_EDGE('',*,*,#24205,.T.); +#24205 = EDGE_CURVE('',#21081,#24206,#24208,.T.); +#24206 = VERTEX_POINT('',#24207); +#24207 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#24208 = LINE('',#24209,#24210); +#24209 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#24210 = VECTOR('',#24211,1.); +#24211 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24212 = ORIENTED_EDGE('',*,*,#24213,.F.); +#24213 = EDGE_CURVE('',#24182,#24206,#24214,.T.); +#24214 = LINE('',#24215,#24216); +#24215 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#24216 = VECTOR('',#24217,1.); +#24217 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24218 = PLANE('',#24219); +#24219 = AXIS2_PLACEMENT_3D('',#24220,#24221,#24222); +#24220 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#24221 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24222 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24223 = ADVANCED_FACE('',(#24224),#24235,.T.); +#24224 = FACE_BOUND('',#24225,.T.); +#24225 = EDGE_LOOP('',(#24226,#24227,#24228,#24229)); +#24226 = ORIENTED_EDGE('',*,*,#24205,.F.); +#24227 = ORIENTED_EDGE('',*,*,#21080,.T.); +#24228 = ORIENTED_EDGE('',*,*,#24148,.T.); +#24229 = ORIENTED_EDGE('',*,*,#24230,.F.); +#24230 = EDGE_CURVE('',#24206,#24149,#24231,.T.); +#24231 = LINE('',#24232,#24233); +#24232 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#24233 = VECTOR('',#24234,1.); +#24234 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24235 = PLANE('',#24236); +#24236 = AXIS2_PLACEMENT_3D('',#24237,#24238,#24239); +#24237 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#24238 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24239 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24240 = ADVANCED_FACE('',(#24241),#24266,.T.); +#24241 = FACE_BOUND('',#24242,.T.); +#24242 = EDGE_LOOP('',(#24243,#24251,#24252,#24260)); +#24243 = ORIENTED_EDGE('',*,*,#24244,.F.); +#24244 = EDGE_CURVE('',#21105,#24245,#24247,.T.); +#24245 = VERTEX_POINT('',#24246); +#24246 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#24247 = LINE('',#24248,#24249); +#24248 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#24249 = VECTOR('',#24250,1.); +#24250 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24251 = ORIENTED_EDGE('',*,*,#21104,.T.); +#24252 = ORIENTED_EDGE('',*,*,#24253,.T.); +#24253 = EDGE_CURVE('',#21107,#24254,#24256,.T.); +#24254 = VERTEX_POINT('',#24255); +#24255 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#24256 = LINE('',#24257,#24258); +#24257 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#24258 = VECTOR('',#24259,1.); +#24259 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24260 = ORIENTED_EDGE('',*,*,#24261,.F.); +#24261 = EDGE_CURVE('',#24245,#24254,#24262,.T.); +#24262 = LINE('',#24263,#24264); +#24263 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#24264 = VECTOR('',#24265,1.); +#24265 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24266 = PLANE('',#24267); +#24267 = AXIS2_PLACEMENT_3D('',#24268,#24269,#24270); +#24268 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#24269 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24270 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24271 = ADVANCED_FACE('',(#24272),#24290,.T.); +#24272 = FACE_BOUND('',#24273,.T.); +#24273 = EDGE_LOOP('',(#24274,#24275,#24276,#24284)); +#24274 = ORIENTED_EDGE('',*,*,#24253,.F.); +#24275 = ORIENTED_EDGE('',*,*,#21130,.T.); +#24276 = ORIENTED_EDGE('',*,*,#24277,.T.); +#24277 = EDGE_CURVE('',#21123,#24278,#24280,.T.); +#24278 = VERTEX_POINT('',#24279); +#24279 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#24280 = LINE('',#24281,#24282); +#24281 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#24282 = VECTOR('',#24283,1.); +#24283 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24284 = ORIENTED_EDGE('',*,*,#24285,.F.); +#24285 = EDGE_CURVE('',#24254,#24278,#24286,.T.); +#24286 = LINE('',#24287,#24288); +#24287 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#24288 = VECTOR('',#24289,1.); +#24289 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24290 = PLANE('',#24291); +#24291 = AXIS2_PLACEMENT_3D('',#24292,#24293,#24294); +#24292 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#24293 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24294 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24295 = ADVANCED_FACE('',(#24296),#24314,.T.); +#24296 = FACE_BOUND('',#24297,.T.); +#24297 = EDGE_LOOP('',(#24298,#24299,#24300,#24308)); +#24298 = ORIENTED_EDGE('',*,*,#24277,.F.); +#24299 = ORIENTED_EDGE('',*,*,#21122,.T.); +#24300 = ORIENTED_EDGE('',*,*,#24301,.T.); +#24301 = EDGE_CURVE('',#21115,#24302,#24304,.T.); +#24302 = VERTEX_POINT('',#24303); +#24303 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#24304 = LINE('',#24305,#24306); +#24305 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#24306 = VECTOR('',#24307,1.); +#24307 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24308 = ORIENTED_EDGE('',*,*,#24309,.F.); +#24309 = EDGE_CURVE('',#24278,#24302,#24310,.T.); +#24310 = LINE('',#24311,#24312); +#24311 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#24312 = VECTOR('',#24313,1.); +#24313 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24314 = PLANE('',#24315); +#24315 = AXIS2_PLACEMENT_3D('',#24316,#24317,#24318); +#24316 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#24317 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24318 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24319 = ADVANCED_FACE('',(#24320),#24331,.T.); +#24320 = FACE_BOUND('',#24321,.T.); +#24321 = EDGE_LOOP('',(#24322,#24323,#24324,#24325)); +#24322 = ORIENTED_EDGE('',*,*,#24301,.F.); +#24323 = ORIENTED_EDGE('',*,*,#21114,.T.); +#24324 = ORIENTED_EDGE('',*,*,#24244,.T.); +#24325 = ORIENTED_EDGE('',*,*,#24326,.F.); +#24326 = EDGE_CURVE('',#24302,#24245,#24327,.T.); +#24327 = LINE('',#24328,#24329); +#24328 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#24329 = VECTOR('',#24330,1.); +#24330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24331 = PLANE('',#24332); +#24332 = AXIS2_PLACEMENT_3D('',#24333,#24334,#24335); +#24333 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#24334 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24335 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24336 = ADVANCED_FACE('',(#24337),#24362,.T.); +#24337 = FACE_BOUND('',#24338,.T.); +#24338 = EDGE_LOOP('',(#24339,#24347,#24348,#24356)); +#24339 = ORIENTED_EDGE('',*,*,#24340,.F.); +#24340 = EDGE_CURVE('',#21139,#24341,#24343,.T.); +#24341 = VERTEX_POINT('',#24342); +#24342 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#24343 = LINE('',#24344,#24345); +#24344 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#24345 = VECTOR('',#24346,1.); +#24346 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24347 = ORIENTED_EDGE('',*,*,#21138,.T.); +#24348 = ORIENTED_EDGE('',*,*,#24349,.T.); +#24349 = EDGE_CURVE('',#21141,#24350,#24352,.T.); +#24350 = VERTEX_POINT('',#24351); +#24351 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#24352 = LINE('',#24353,#24354); +#24353 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#24354 = VECTOR('',#24355,1.); +#24355 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24356 = ORIENTED_EDGE('',*,*,#24357,.F.); +#24357 = EDGE_CURVE('',#24341,#24350,#24358,.T.); +#24358 = LINE('',#24359,#24360); +#24359 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#24360 = VECTOR('',#24361,1.); +#24361 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24362 = PLANE('',#24363); +#24363 = AXIS2_PLACEMENT_3D('',#24364,#24365,#24366); +#24364 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#24365 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24366 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24367 = ADVANCED_FACE('',(#24368),#24386,.T.); +#24368 = FACE_BOUND('',#24369,.T.); +#24369 = EDGE_LOOP('',(#24370,#24371,#24372,#24380)); +#24370 = ORIENTED_EDGE('',*,*,#24349,.F.); +#24371 = ORIENTED_EDGE('',*,*,#21164,.T.); +#24372 = ORIENTED_EDGE('',*,*,#24373,.T.); +#24373 = EDGE_CURVE('',#21157,#24374,#24376,.T.); +#24374 = VERTEX_POINT('',#24375); +#24375 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#24376 = LINE('',#24377,#24378); +#24377 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#24378 = VECTOR('',#24379,1.); +#24379 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24380 = ORIENTED_EDGE('',*,*,#24381,.F.); +#24381 = EDGE_CURVE('',#24350,#24374,#24382,.T.); +#24382 = LINE('',#24383,#24384); +#24383 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#24384 = VECTOR('',#24385,1.); +#24385 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24386 = PLANE('',#24387); +#24387 = AXIS2_PLACEMENT_3D('',#24388,#24389,#24390); +#24388 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#24389 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24390 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24391 = ADVANCED_FACE('',(#24392),#24410,.T.); +#24392 = FACE_BOUND('',#24393,.T.); +#24393 = EDGE_LOOP('',(#24394,#24395,#24396,#24404)); +#24394 = ORIENTED_EDGE('',*,*,#24373,.F.); +#24395 = ORIENTED_EDGE('',*,*,#21156,.T.); +#24396 = ORIENTED_EDGE('',*,*,#24397,.T.); +#24397 = EDGE_CURVE('',#21149,#24398,#24400,.T.); +#24398 = VERTEX_POINT('',#24399); +#24399 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#24400 = LINE('',#24401,#24402); +#24401 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#24402 = VECTOR('',#24403,1.); +#24403 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24404 = ORIENTED_EDGE('',*,*,#24405,.F.); +#24405 = EDGE_CURVE('',#24374,#24398,#24406,.T.); +#24406 = LINE('',#24407,#24408); +#24407 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#24408 = VECTOR('',#24409,1.); +#24409 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24410 = PLANE('',#24411); +#24411 = AXIS2_PLACEMENT_3D('',#24412,#24413,#24414); +#24412 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#24413 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24414 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24415 = ADVANCED_FACE('',(#24416),#24427,.T.); +#24416 = FACE_BOUND('',#24417,.T.); +#24417 = EDGE_LOOP('',(#24418,#24419,#24420,#24421)); +#24418 = ORIENTED_EDGE('',*,*,#24397,.F.); +#24419 = ORIENTED_EDGE('',*,*,#21148,.T.); +#24420 = ORIENTED_EDGE('',*,*,#24340,.T.); +#24421 = ORIENTED_EDGE('',*,*,#24422,.F.); +#24422 = EDGE_CURVE('',#24398,#24341,#24423,.T.); +#24423 = LINE('',#24424,#24425); +#24424 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#24425 = VECTOR('',#24426,1.); +#24426 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24427 = PLANE('',#24428); +#24428 = AXIS2_PLACEMENT_3D('',#24429,#24430,#24431); +#24429 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#24430 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24431 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24432 = ADVANCED_FACE('',(#24433),#24458,.T.); +#24433 = FACE_BOUND('',#24434,.T.); +#24434 = EDGE_LOOP('',(#24435,#24443,#24444,#24452)); +#24435 = ORIENTED_EDGE('',*,*,#24436,.F.); +#24436 = EDGE_CURVE('',#21173,#24437,#24439,.T.); +#24437 = VERTEX_POINT('',#24438); +#24438 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#24439 = LINE('',#24440,#24441); +#24440 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#24441 = VECTOR('',#24442,1.); +#24442 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#24443 = ORIENTED_EDGE('',*,*,#21172,.T.); +#24444 = ORIENTED_EDGE('',*,*,#24445,.T.); +#24445 = EDGE_CURVE('',#21175,#24446,#24448,.T.); +#24446 = VERTEX_POINT('',#24447); +#24447 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#24448 = LINE('',#24449,#24450); +#24449 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#24450 = VECTOR('',#24451,1.); +#24451 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#24452 = ORIENTED_EDGE('',*,*,#24453,.F.); +#24453 = EDGE_CURVE('',#24437,#24446,#24454,.T.); +#24454 = LINE('',#24455,#24456); +#24455 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#24456 = VECTOR('',#24457,1.); +#24457 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24458 = PLANE('',#24459); +#24459 = AXIS2_PLACEMENT_3D('',#24460,#24461,#24462); +#24460 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#24461 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#24462 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#24463 = ADVANCED_FACE('',(#24464),#24482,.T.); +#24464 = FACE_BOUND('',#24465,.T.); +#24465 = EDGE_LOOP('',(#24466,#24467,#24468,#24476)); +#24466 = ORIENTED_EDGE('',*,*,#24445,.F.); +#24467 = ORIENTED_EDGE('',*,*,#21198,.T.); +#24468 = ORIENTED_EDGE('',*,*,#24469,.T.); +#24469 = EDGE_CURVE('',#21191,#24470,#24472,.T.); +#24470 = VERTEX_POINT('',#24471); +#24471 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#24472 = LINE('',#24473,#24474); +#24473 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#24474 = VECTOR('',#24475,1.); +#24475 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#24476 = ORIENTED_EDGE('',*,*,#24477,.F.); +#24477 = EDGE_CURVE('',#24446,#24470,#24478,.T.); +#24478 = LINE('',#24479,#24480); +#24479 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#24480 = VECTOR('',#24481,1.); +#24481 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24482 = PLANE('',#24483); +#24483 = AXIS2_PLACEMENT_3D('',#24484,#24485,#24486); +#24484 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#24485 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#24486 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#24487 = ADVANCED_FACE('',(#24488),#24506,.T.); +#24488 = FACE_BOUND('',#24489,.T.); +#24489 = EDGE_LOOP('',(#24490,#24491,#24492,#24500)); +#24490 = ORIENTED_EDGE('',*,*,#24469,.F.); +#24491 = ORIENTED_EDGE('',*,*,#21190,.T.); +#24492 = ORIENTED_EDGE('',*,*,#24493,.T.); +#24493 = EDGE_CURVE('',#21183,#24494,#24496,.T.); +#24494 = VERTEX_POINT('',#24495); +#24495 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#24496 = LINE('',#24497,#24498); +#24497 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#24498 = VECTOR('',#24499,1.); +#24499 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#24500 = ORIENTED_EDGE('',*,*,#24501,.F.); +#24501 = EDGE_CURVE('',#24470,#24494,#24502,.T.); +#24502 = LINE('',#24503,#24504); +#24503 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#24504 = VECTOR('',#24505,1.); +#24505 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24506 = PLANE('',#24507); +#24507 = AXIS2_PLACEMENT_3D('',#24508,#24509,#24510); +#24508 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#24509 = DIRECTION('',(0.707106781187,-7.850462293414E-17,0.707106781187 + )); +#24510 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#24511 = ADVANCED_FACE('',(#24512),#24523,.T.); +#24512 = FACE_BOUND('',#24513,.T.); +#24513 = EDGE_LOOP('',(#24514,#24515,#24516,#24517)); +#24514 = ORIENTED_EDGE('',*,*,#24493,.F.); +#24515 = ORIENTED_EDGE('',*,*,#21182,.T.); +#24516 = ORIENTED_EDGE('',*,*,#24436,.T.); +#24517 = ORIENTED_EDGE('',*,*,#24518,.F.); +#24518 = EDGE_CURVE('',#24494,#24437,#24519,.T.); +#24519 = LINE('',#24520,#24521); +#24520 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#24521 = VECTOR('',#24522,1.); +#24522 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24523 = PLANE('',#24524); +#24524 = AXIS2_PLACEMENT_3D('',#24525,#24526,#24527); +#24525 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#24526 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#24527 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#24528 = ADVANCED_FACE('',(#24529),#24540,.T.); +#24529 = FACE_BOUND('',#24530,.T.); +#24530 = EDGE_LOOP('',(#24531,#24532,#24533,#24539)); +#24531 = ORIENTED_EDGE('',*,*,#21262,.F.); +#24532 = ORIENTED_EDGE('',*,*,#21272,.T.); +#24533 = ORIENTED_EDGE('',*,*,#24534,.T.); +#24534 = EDGE_CURVE('',#21273,#21313,#24535,.T.); +#24535 = LINE('',#24536,#24537); +#24536 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#24537 = VECTOR('',#24538,1.); +#24538 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24539 = ORIENTED_EDGE('',*,*,#21320,.T.); +#24540 = PLANE('',#24541); +#24541 = AXIS2_PLACEMENT_3D('',#24542,#24543,#24544); +#24542 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#24543 = DIRECTION('',(0.,-0.,-1.)); +#24544 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24545 = ADVANCED_FACE('',(#24546),#24587,.F.); +#24546 = FACE_BOUND('',#24547,.F.); +#24547 = EDGE_LOOP('',(#24548,#24556,#24557,#24565,#24573,#24581)); +#24548 = ORIENTED_EDGE('',*,*,#24549,.T.); +#24549 = EDGE_CURVE('',#24550,#21313,#24552,.T.); +#24550 = VERTEX_POINT('',#24551); +#24551 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,-2.5)); +#24552 = LINE('',#24553,#24554); +#24553 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,-2.5)); +#24554 = VECTOR('',#24555,1.); +#24555 = DIRECTION('',(0.,0.,1.)); +#24556 = ORIENTED_EDGE('',*,*,#21312,.F.); +#24557 = ORIENTED_EDGE('',*,*,#24558,.T.); +#24558 = EDGE_CURVE('',#21305,#24559,#24561,.T.); +#24559 = VERTEX_POINT('',#24560); +#24560 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,-2.5)); +#24561 = LINE('',#24562,#24563); +#24562 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,0.2)); +#24563 = VECTOR('',#24564,1.); +#24564 = DIRECTION('',(0.,0.,-1.)); +#24565 = ORIENTED_EDGE('',*,*,#24566,.T.); +#24566 = EDGE_CURVE('',#24559,#24567,#24569,.T.); +#24567 = VERTEX_POINT('',#24568); +#24568 = CARTESIAN_POINT('',(9.999999999999E-02,-48.11,-3.1)); +#24569 = LINE('',#24570,#24571); +#24570 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,-2.5)); +#24571 = VECTOR('',#24572,1.); +#24572 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24573 = ORIENTED_EDGE('',*,*,#24574,.T.); +#24574 = EDGE_CURVE('',#24567,#24575,#24577,.T.); +#24575 = VERTEX_POINT('',#24576); +#24576 = CARTESIAN_POINT('',(9.999999999999E-02,-48.41,-3.1)); +#24577 = LINE('',#24578,#24579); +#24578 = CARTESIAN_POINT('',(9.999999999999E-02,-48.11,-3.1)); +#24579 = VECTOR('',#24580,1.); +#24580 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24581 = ORIENTED_EDGE('',*,*,#24582,.T.); +#24582 = EDGE_CURVE('',#24575,#24550,#24583,.T.); +#24583 = LINE('',#24584,#24585); +#24584 = CARTESIAN_POINT('',(9.999999999999E-02,-48.41,-3.1)); +#24585 = VECTOR('',#24586,1.); +#24586 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24587 = PLANE('',#24588); +#24588 = AXIS2_PLACEMENT_3D('',#24589,#24590,#24591); +#24589 = CARTESIAN_POINT('',(9.999999999999E-02,-48.26,3.911477598424)); +#24590 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24591 = DIRECTION('',(0.,0.,1.)); +#24592 = ADVANCED_FACE('',(#24593),#24604,.T.); +#24593 = FACE_BOUND('',#24594,.T.); +#24594 = EDGE_LOOP('',(#24595,#24601,#24602,#24603)); +#24595 = ORIENTED_EDGE('',*,*,#24596,.F.); +#24596 = EDGE_CURVE('',#21281,#21305,#24597,.T.); +#24597 = LINE('',#24598,#24599); +#24598 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#24599 = VECTOR('',#24600,1.); +#24600 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24601 = ORIENTED_EDGE('',*,*,#21288,.T.); +#24602 = ORIENTED_EDGE('',*,*,#21296,.T.); +#24603 = ORIENTED_EDGE('',*,*,#21304,.T.); +#24604 = PLANE('',#24605); +#24605 = AXIS2_PLACEMENT_3D('',#24606,#24607,#24608); +#24606 = CARTESIAN_POINT('',(-0.1,-48.56,0.2)); +#24607 = DIRECTION('',(0.,-0.,-1.)); +#24608 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24609 = ADVANCED_FACE('',(#24610),#24651,.T.); +#24610 = FACE_BOUND('',#24611,.T.); +#24611 = EDGE_LOOP('',(#24612,#24620,#24621,#24629,#24637,#24645)); +#24612 = ORIENTED_EDGE('',*,*,#24613,.T.); +#24613 = EDGE_CURVE('',#24614,#21273,#24616,.T.); +#24614 = VERTEX_POINT('',#24615); +#24615 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#24616 = LINE('',#24617,#24618); +#24617 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#24618 = VECTOR('',#24619,1.); +#24619 = DIRECTION('',(0.,0.,1.)); +#24620 = ORIENTED_EDGE('',*,*,#21280,.F.); +#24621 = ORIENTED_EDGE('',*,*,#24622,.T.); +#24622 = EDGE_CURVE('',#21281,#24623,#24625,.T.); +#24623 = VERTEX_POINT('',#24624); +#24624 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#24625 = LINE('',#24626,#24627); +#24626 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#24627 = VECTOR('',#24628,1.); +#24628 = DIRECTION('',(0.,0.,-1.)); +#24629 = ORIENTED_EDGE('',*,*,#24630,.T.); +#24630 = EDGE_CURVE('',#24623,#24631,#24633,.T.); +#24631 = VERTEX_POINT('',#24632); +#24632 = CARTESIAN_POINT('',(-0.1,-48.11,-3.1)); +#24633 = LINE('',#24634,#24635); +#24634 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#24635 = VECTOR('',#24636,1.); +#24636 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24637 = ORIENTED_EDGE('',*,*,#24638,.F.); +#24638 = EDGE_CURVE('',#24639,#24631,#24641,.T.); +#24639 = VERTEX_POINT('',#24640); +#24640 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#24641 = LINE('',#24642,#24643); +#24642 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#24643 = VECTOR('',#24644,1.); +#24644 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24645 = ORIENTED_EDGE('',*,*,#24646,.T.); +#24646 = EDGE_CURVE('',#24639,#24614,#24647,.T.); +#24647 = LINE('',#24648,#24649); +#24648 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#24649 = VECTOR('',#24650,1.); +#24650 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24651 = PLANE('',#24652); +#24652 = AXIS2_PLACEMENT_3D('',#24653,#24654,#24655); +#24653 = CARTESIAN_POINT('',(-0.1,-48.26,3.911477598424)); +#24654 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24655 = DIRECTION('',(0.,0.,1.)); +#24656 = ADVANCED_FACE('',(#24657),#24668,.T.); +#24657 = FACE_BOUND('',#24658,.T.); +#24658 = EDGE_LOOP('',(#24659,#24660,#24661,#24667)); +#24659 = ORIENTED_EDGE('',*,*,#21328,.F.); +#24660 = ORIENTED_EDGE('',*,*,#21338,.T.); +#24661 = ORIENTED_EDGE('',*,*,#24662,.T.); +#24662 = EDGE_CURVE('',#21339,#21379,#24663,.T.); +#24663 = LINE('',#24664,#24665); +#24664 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#24665 = VECTOR('',#24666,1.); +#24666 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24667 = ORIENTED_EDGE('',*,*,#21386,.T.); +#24668 = PLANE('',#24669); +#24669 = AXIS2_PLACEMENT_3D('',#24670,#24671,#24672); +#24670 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#24671 = DIRECTION('',(0.,-0.,-1.)); +#24672 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24673 = ADVANCED_FACE('',(#24674),#24715,.F.); +#24674 = FACE_BOUND('',#24675,.F.); +#24675 = EDGE_LOOP('',(#24676,#24684,#24685,#24693,#24701,#24709)); +#24676 = ORIENTED_EDGE('',*,*,#24677,.T.); +#24677 = EDGE_CURVE('',#24678,#21379,#24680,.T.); +#24678 = VERTEX_POINT('',#24679); +#24679 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,-2.5)); +#24680 = LINE('',#24681,#24682); +#24681 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,-2.5)); +#24682 = VECTOR('',#24683,1.); +#24683 = DIRECTION('',(0.,0.,1.)); +#24684 = ORIENTED_EDGE('',*,*,#21378,.F.); +#24685 = ORIENTED_EDGE('',*,*,#24686,.T.); +#24686 = EDGE_CURVE('',#21371,#24687,#24689,.T.); +#24687 = VERTEX_POINT('',#24688); +#24688 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,-2.5)); +#24689 = LINE('',#24690,#24691); +#24690 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,0.2)); +#24691 = VECTOR('',#24692,1.); +#24692 = DIRECTION('',(0.,0.,-1.)); +#24693 = ORIENTED_EDGE('',*,*,#24694,.T.); +#24694 = EDGE_CURVE('',#24687,#24695,#24697,.T.); +#24695 = VERTEX_POINT('',#24696); +#24696 = CARTESIAN_POINT('',(9.999999999999E-02,-45.57,-3.1)); +#24697 = LINE('',#24698,#24699); +#24698 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,-2.5)); +#24699 = VECTOR('',#24700,1.); +#24700 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24701 = ORIENTED_EDGE('',*,*,#24702,.T.); +#24702 = EDGE_CURVE('',#24695,#24703,#24705,.T.); +#24703 = VERTEX_POINT('',#24704); +#24704 = CARTESIAN_POINT('',(9.999999999999E-02,-45.87,-3.1)); +#24705 = LINE('',#24706,#24707); +#24706 = CARTESIAN_POINT('',(9.999999999999E-02,-45.57,-3.1)); +#24707 = VECTOR('',#24708,1.); +#24708 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24709 = ORIENTED_EDGE('',*,*,#24710,.T.); +#24710 = EDGE_CURVE('',#24703,#24678,#24711,.T.); +#24711 = LINE('',#24712,#24713); +#24712 = CARTESIAN_POINT('',(9.999999999999E-02,-45.87,-3.1)); +#24713 = VECTOR('',#24714,1.); +#24714 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24715 = PLANE('',#24716); +#24716 = AXIS2_PLACEMENT_3D('',#24717,#24718,#24719); +#24717 = CARTESIAN_POINT('',(9.999999999999E-02,-45.72,3.911477598424)); +#24718 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24719 = DIRECTION('',(0.,0.,1.)); +#24720 = ADVANCED_FACE('',(#24721),#24732,.T.); +#24721 = FACE_BOUND('',#24722,.T.); +#24722 = EDGE_LOOP('',(#24723,#24729,#24730,#24731)); +#24723 = ORIENTED_EDGE('',*,*,#24724,.F.); +#24724 = EDGE_CURVE('',#21347,#21371,#24725,.T.); +#24725 = LINE('',#24726,#24727); +#24726 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#24727 = VECTOR('',#24728,1.); +#24728 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24729 = ORIENTED_EDGE('',*,*,#21354,.T.); +#24730 = ORIENTED_EDGE('',*,*,#21362,.T.); +#24731 = ORIENTED_EDGE('',*,*,#21370,.T.); +#24732 = PLANE('',#24733); +#24733 = AXIS2_PLACEMENT_3D('',#24734,#24735,#24736); +#24734 = CARTESIAN_POINT('',(-0.1,-46.02,0.2)); +#24735 = DIRECTION('',(0.,-0.,-1.)); +#24736 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24737 = ADVANCED_FACE('',(#24738),#24779,.T.); +#24738 = FACE_BOUND('',#24739,.T.); +#24739 = EDGE_LOOP('',(#24740,#24748,#24749,#24757,#24765,#24773)); +#24740 = ORIENTED_EDGE('',*,*,#24741,.T.); +#24741 = EDGE_CURVE('',#24742,#21339,#24744,.T.); +#24742 = VERTEX_POINT('',#24743); +#24743 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#24744 = LINE('',#24745,#24746); +#24745 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#24746 = VECTOR('',#24747,1.); +#24747 = DIRECTION('',(0.,0.,1.)); +#24748 = ORIENTED_EDGE('',*,*,#21346,.F.); +#24749 = ORIENTED_EDGE('',*,*,#24750,.T.); +#24750 = EDGE_CURVE('',#21347,#24751,#24753,.T.); +#24751 = VERTEX_POINT('',#24752); +#24752 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#24753 = LINE('',#24754,#24755); +#24754 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#24755 = VECTOR('',#24756,1.); +#24756 = DIRECTION('',(0.,0.,-1.)); +#24757 = ORIENTED_EDGE('',*,*,#24758,.T.); +#24758 = EDGE_CURVE('',#24751,#24759,#24761,.T.); +#24759 = VERTEX_POINT('',#24760); +#24760 = CARTESIAN_POINT('',(-0.1,-45.57,-3.1)); +#24761 = LINE('',#24762,#24763); +#24762 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#24763 = VECTOR('',#24764,1.); +#24764 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24765 = ORIENTED_EDGE('',*,*,#24766,.F.); +#24766 = EDGE_CURVE('',#24767,#24759,#24769,.T.); +#24767 = VERTEX_POINT('',#24768); +#24768 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#24769 = LINE('',#24770,#24771); +#24770 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#24771 = VECTOR('',#24772,1.); +#24772 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24773 = ORIENTED_EDGE('',*,*,#24774,.T.); +#24774 = EDGE_CURVE('',#24767,#24742,#24775,.T.); +#24775 = LINE('',#24776,#24777); +#24776 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#24777 = VECTOR('',#24778,1.); +#24778 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24779 = PLANE('',#24780); +#24780 = AXIS2_PLACEMENT_3D('',#24781,#24782,#24783); +#24781 = CARTESIAN_POINT('',(-0.1,-45.72,3.911477598424)); +#24782 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24783 = DIRECTION('',(0.,0.,1.)); +#24784 = ADVANCED_FACE('',(#24785),#24796,.T.); +#24785 = FACE_BOUND('',#24786,.T.); +#24786 = EDGE_LOOP('',(#24787,#24788,#24789,#24795)); +#24787 = ORIENTED_EDGE('',*,*,#21394,.F.); +#24788 = ORIENTED_EDGE('',*,*,#21404,.T.); +#24789 = ORIENTED_EDGE('',*,*,#24790,.T.); +#24790 = EDGE_CURVE('',#21405,#21445,#24791,.T.); +#24791 = LINE('',#24792,#24793); +#24792 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#24793 = VECTOR('',#24794,1.); +#24794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24795 = ORIENTED_EDGE('',*,*,#21452,.T.); +#24796 = PLANE('',#24797); +#24797 = AXIS2_PLACEMENT_3D('',#24798,#24799,#24800); +#24798 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#24799 = DIRECTION('',(0.,-0.,-1.)); +#24800 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24801 = ADVANCED_FACE('',(#24802),#24843,.F.); +#24802 = FACE_BOUND('',#24803,.F.); +#24803 = EDGE_LOOP('',(#24804,#24812,#24813,#24821,#24829,#24837)); +#24804 = ORIENTED_EDGE('',*,*,#24805,.T.); +#24805 = EDGE_CURVE('',#24806,#21445,#24808,.T.); +#24806 = VERTEX_POINT('',#24807); +#24807 = CARTESIAN_POINT('',(0.1,-43.48,-2.5)); +#24808 = LINE('',#24809,#24810); +#24809 = CARTESIAN_POINT('',(0.1,-43.48,-2.5)); +#24810 = VECTOR('',#24811,1.); +#24811 = DIRECTION('',(0.,0.,1.)); +#24812 = ORIENTED_EDGE('',*,*,#21444,.F.); +#24813 = ORIENTED_EDGE('',*,*,#24814,.T.); +#24814 = EDGE_CURVE('',#21437,#24815,#24817,.T.); +#24815 = VERTEX_POINT('',#24816); +#24816 = CARTESIAN_POINT('',(0.1,-42.88,-2.5)); +#24817 = LINE('',#24818,#24819); +#24818 = CARTESIAN_POINT('',(0.1,-42.88,0.2)); +#24819 = VECTOR('',#24820,1.); +#24820 = DIRECTION('',(0.,0.,-1.)); +#24821 = ORIENTED_EDGE('',*,*,#24822,.T.); +#24822 = EDGE_CURVE('',#24815,#24823,#24825,.T.); +#24823 = VERTEX_POINT('',#24824); +#24824 = CARTESIAN_POINT('',(0.1,-43.03,-3.1)); +#24825 = LINE('',#24826,#24827); +#24826 = CARTESIAN_POINT('',(0.1,-42.88,-2.5)); +#24827 = VECTOR('',#24828,1.); +#24828 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24829 = ORIENTED_EDGE('',*,*,#24830,.T.); +#24830 = EDGE_CURVE('',#24823,#24831,#24833,.T.); +#24831 = VERTEX_POINT('',#24832); +#24832 = CARTESIAN_POINT('',(0.1,-43.33,-3.1)); +#24833 = LINE('',#24834,#24835); +#24834 = CARTESIAN_POINT('',(0.1,-43.03,-3.1)); +#24835 = VECTOR('',#24836,1.); +#24836 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24837 = ORIENTED_EDGE('',*,*,#24838,.T.); +#24838 = EDGE_CURVE('',#24831,#24806,#24839,.T.); +#24839 = LINE('',#24840,#24841); +#24840 = CARTESIAN_POINT('',(0.1,-43.33,-3.1)); +#24841 = VECTOR('',#24842,1.); +#24842 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24843 = PLANE('',#24844); +#24844 = AXIS2_PLACEMENT_3D('',#24845,#24846,#24847); +#24845 = CARTESIAN_POINT('',(0.1,-43.18,3.911477598424)); +#24846 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24847 = DIRECTION('',(0.,0.,1.)); +#24848 = ADVANCED_FACE('',(#24849),#24860,.T.); +#24849 = FACE_BOUND('',#24850,.T.); +#24850 = EDGE_LOOP('',(#24851,#24857,#24858,#24859)); +#24851 = ORIENTED_EDGE('',*,*,#24852,.F.); +#24852 = EDGE_CURVE('',#21413,#21437,#24853,.T.); +#24853 = LINE('',#24854,#24855); +#24854 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#24855 = VECTOR('',#24856,1.); +#24856 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24857 = ORIENTED_EDGE('',*,*,#21420,.T.); +#24858 = ORIENTED_EDGE('',*,*,#21428,.T.); +#24859 = ORIENTED_EDGE('',*,*,#21436,.T.); +#24860 = PLANE('',#24861); +#24861 = AXIS2_PLACEMENT_3D('',#24862,#24863,#24864); +#24862 = CARTESIAN_POINT('',(-0.1,-43.48,0.2)); +#24863 = DIRECTION('',(0.,-0.,-1.)); +#24864 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24865 = ADVANCED_FACE('',(#24866),#24907,.T.); +#24866 = FACE_BOUND('',#24867,.T.); +#24867 = EDGE_LOOP('',(#24868,#24876,#24877,#24885,#24893,#24901)); +#24868 = ORIENTED_EDGE('',*,*,#24869,.T.); +#24869 = EDGE_CURVE('',#24870,#21405,#24872,.T.); +#24870 = VERTEX_POINT('',#24871); +#24871 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#24872 = LINE('',#24873,#24874); +#24873 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#24874 = VECTOR('',#24875,1.); +#24875 = DIRECTION('',(0.,0.,1.)); +#24876 = ORIENTED_EDGE('',*,*,#21412,.F.); +#24877 = ORIENTED_EDGE('',*,*,#24878,.T.); +#24878 = EDGE_CURVE('',#21413,#24879,#24881,.T.); +#24879 = VERTEX_POINT('',#24880); +#24880 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#24881 = LINE('',#24882,#24883); +#24882 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#24883 = VECTOR('',#24884,1.); +#24884 = DIRECTION('',(0.,0.,-1.)); +#24885 = ORIENTED_EDGE('',*,*,#24886,.T.); +#24886 = EDGE_CURVE('',#24879,#24887,#24889,.T.); +#24887 = VERTEX_POINT('',#24888); +#24888 = CARTESIAN_POINT('',(-0.1,-43.03,-3.1)); +#24889 = LINE('',#24890,#24891); +#24890 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#24891 = VECTOR('',#24892,1.); +#24892 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24893 = ORIENTED_EDGE('',*,*,#24894,.F.); +#24894 = EDGE_CURVE('',#24895,#24887,#24897,.T.); +#24895 = VERTEX_POINT('',#24896); +#24896 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#24897 = LINE('',#24898,#24899); +#24898 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#24899 = VECTOR('',#24900,1.); +#24900 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24901 = ORIENTED_EDGE('',*,*,#24902,.T.); +#24902 = EDGE_CURVE('',#24895,#24870,#24903,.T.); +#24903 = LINE('',#24904,#24905); +#24904 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#24905 = VECTOR('',#24906,1.); +#24906 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24907 = PLANE('',#24908); +#24908 = AXIS2_PLACEMENT_3D('',#24909,#24910,#24911); +#24909 = CARTESIAN_POINT('',(-0.1,-43.18,3.911477598424)); +#24910 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24911 = DIRECTION('',(0.,0.,1.)); +#24912 = ADVANCED_FACE('',(#24913),#24924,.T.); +#24913 = FACE_BOUND('',#24914,.T.); +#24914 = EDGE_LOOP('',(#24915,#24916,#24917,#24923)); +#24915 = ORIENTED_EDGE('',*,*,#21460,.F.); +#24916 = ORIENTED_EDGE('',*,*,#21470,.T.); +#24917 = ORIENTED_EDGE('',*,*,#24918,.T.); +#24918 = EDGE_CURVE('',#21471,#21511,#24919,.T.); +#24919 = LINE('',#24920,#24921); +#24920 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#24921 = VECTOR('',#24922,1.); +#24922 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24923 = ORIENTED_EDGE('',*,*,#21518,.T.); +#24924 = PLANE('',#24925); +#24925 = AXIS2_PLACEMENT_3D('',#24926,#24927,#24928); +#24926 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#24927 = DIRECTION('',(0.,-0.,-1.)); +#24928 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24929 = ADVANCED_FACE('',(#24930),#24971,.F.); +#24930 = FACE_BOUND('',#24931,.F.); +#24931 = EDGE_LOOP('',(#24932,#24940,#24941,#24949,#24957,#24965)); +#24932 = ORIENTED_EDGE('',*,*,#24933,.T.); +#24933 = EDGE_CURVE('',#24934,#21511,#24936,.T.); +#24934 = VERTEX_POINT('',#24935); +#24935 = CARTESIAN_POINT('',(0.1,-40.94,-2.5)); +#24936 = LINE('',#24937,#24938); +#24937 = CARTESIAN_POINT('',(0.1,-40.94,-2.5)); +#24938 = VECTOR('',#24939,1.); +#24939 = DIRECTION('',(0.,0.,1.)); +#24940 = ORIENTED_EDGE('',*,*,#21510,.F.); +#24941 = ORIENTED_EDGE('',*,*,#24942,.T.); +#24942 = EDGE_CURVE('',#21503,#24943,#24945,.T.); +#24943 = VERTEX_POINT('',#24944); +#24944 = CARTESIAN_POINT('',(0.1,-40.34,-2.5)); +#24945 = LINE('',#24946,#24947); +#24946 = CARTESIAN_POINT('',(0.1,-40.34,0.2)); +#24947 = VECTOR('',#24948,1.); +#24948 = DIRECTION('',(0.,0.,-1.)); +#24949 = ORIENTED_EDGE('',*,*,#24950,.T.); +#24950 = EDGE_CURVE('',#24943,#24951,#24953,.T.); +#24951 = VERTEX_POINT('',#24952); +#24952 = CARTESIAN_POINT('',(0.1,-40.49,-3.1)); +#24953 = LINE('',#24954,#24955); +#24954 = CARTESIAN_POINT('',(0.1,-40.34,-2.5)); +#24955 = VECTOR('',#24956,1.); +#24956 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#24957 = ORIENTED_EDGE('',*,*,#24958,.T.); +#24958 = EDGE_CURVE('',#24951,#24959,#24961,.T.); +#24959 = VERTEX_POINT('',#24960); +#24960 = CARTESIAN_POINT('',(0.1,-40.79,-3.1)); +#24961 = LINE('',#24962,#24963); +#24962 = CARTESIAN_POINT('',(0.1,-40.49,-3.1)); +#24963 = VECTOR('',#24964,1.); +#24964 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24965 = ORIENTED_EDGE('',*,*,#24966,.T.); +#24966 = EDGE_CURVE('',#24959,#24934,#24967,.T.); +#24967 = LINE('',#24968,#24969); +#24968 = CARTESIAN_POINT('',(0.1,-40.79,-3.1)); +#24969 = VECTOR('',#24970,1.); +#24970 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#24971 = PLANE('',#24972); +#24972 = AXIS2_PLACEMENT_3D('',#24973,#24974,#24975); +#24973 = CARTESIAN_POINT('',(0.1,-40.64,3.911477598424)); +#24974 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24975 = DIRECTION('',(0.,0.,1.)); +#24976 = ADVANCED_FACE('',(#24977),#24988,.T.); +#24977 = FACE_BOUND('',#24978,.T.); +#24978 = EDGE_LOOP('',(#24979,#24985,#24986,#24987)); +#24979 = ORIENTED_EDGE('',*,*,#24980,.F.); +#24980 = EDGE_CURVE('',#21479,#21503,#24981,.T.); +#24981 = LINE('',#24982,#24983); +#24982 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#24983 = VECTOR('',#24984,1.); +#24984 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#24985 = ORIENTED_EDGE('',*,*,#21486,.T.); +#24986 = ORIENTED_EDGE('',*,*,#21494,.T.); +#24987 = ORIENTED_EDGE('',*,*,#21502,.T.); +#24988 = PLANE('',#24989); +#24989 = AXIS2_PLACEMENT_3D('',#24990,#24991,#24992); +#24990 = CARTESIAN_POINT('',(-0.1,-40.94,0.2)); +#24991 = DIRECTION('',(0.,-0.,-1.)); +#24992 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24993 = ADVANCED_FACE('',(#24994),#25035,.T.); +#24994 = FACE_BOUND('',#24995,.T.); +#24995 = EDGE_LOOP('',(#24996,#25004,#25005,#25013,#25021,#25029)); +#24996 = ORIENTED_EDGE('',*,*,#24997,.T.); +#24997 = EDGE_CURVE('',#24998,#21471,#25000,.T.); +#24998 = VERTEX_POINT('',#24999); +#24999 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#25000 = LINE('',#25001,#25002); +#25001 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#25002 = VECTOR('',#25003,1.); +#25003 = DIRECTION('',(0.,0.,1.)); +#25004 = ORIENTED_EDGE('',*,*,#21478,.F.); +#25005 = ORIENTED_EDGE('',*,*,#25006,.T.); +#25006 = EDGE_CURVE('',#21479,#25007,#25009,.T.); +#25007 = VERTEX_POINT('',#25008); +#25008 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#25009 = LINE('',#25010,#25011); +#25010 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#25011 = VECTOR('',#25012,1.); +#25012 = DIRECTION('',(0.,0.,-1.)); +#25013 = ORIENTED_EDGE('',*,*,#25014,.T.); +#25014 = EDGE_CURVE('',#25007,#25015,#25017,.T.); +#25015 = VERTEX_POINT('',#25016); +#25016 = CARTESIAN_POINT('',(-0.1,-40.49,-3.1)); +#25017 = LINE('',#25018,#25019); +#25018 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#25019 = VECTOR('',#25020,1.); +#25020 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25021 = ORIENTED_EDGE('',*,*,#25022,.F.); +#25022 = EDGE_CURVE('',#25023,#25015,#25025,.T.); +#25023 = VERTEX_POINT('',#25024); +#25024 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#25025 = LINE('',#25026,#25027); +#25026 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#25027 = VECTOR('',#25028,1.); +#25028 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25029 = ORIENTED_EDGE('',*,*,#25030,.T.); +#25030 = EDGE_CURVE('',#25023,#24998,#25031,.T.); +#25031 = LINE('',#25032,#25033); +#25032 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#25033 = VECTOR('',#25034,1.); +#25034 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25035 = PLANE('',#25036); +#25036 = AXIS2_PLACEMENT_3D('',#25037,#25038,#25039); +#25037 = CARTESIAN_POINT('',(-0.1,-40.64,3.911477598424)); +#25038 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25039 = DIRECTION('',(0.,0.,1.)); +#25040 = ADVANCED_FACE('',(#25041),#25052,.T.); +#25041 = FACE_BOUND('',#25042,.T.); +#25042 = EDGE_LOOP('',(#25043,#25044,#25045,#25051)); +#25043 = ORIENTED_EDGE('',*,*,#21526,.F.); +#25044 = ORIENTED_EDGE('',*,*,#21536,.T.); +#25045 = ORIENTED_EDGE('',*,*,#25046,.T.); +#25046 = EDGE_CURVE('',#21537,#21577,#25047,.T.); +#25047 = LINE('',#25048,#25049); +#25048 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#25049 = VECTOR('',#25050,1.); +#25050 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25051 = ORIENTED_EDGE('',*,*,#21584,.T.); +#25052 = PLANE('',#25053); +#25053 = AXIS2_PLACEMENT_3D('',#25054,#25055,#25056); +#25054 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#25055 = DIRECTION('',(0.,-0.,-1.)); +#25056 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25057 = ADVANCED_FACE('',(#25058),#25099,.F.); +#25058 = FACE_BOUND('',#25059,.F.); +#25059 = EDGE_LOOP('',(#25060,#25068,#25069,#25077,#25085,#25093)); +#25060 = ORIENTED_EDGE('',*,*,#25061,.T.); +#25061 = EDGE_CURVE('',#25062,#21577,#25064,.T.); +#25062 = VERTEX_POINT('',#25063); +#25063 = CARTESIAN_POINT('',(0.1,-38.4,-2.5)); +#25064 = LINE('',#25065,#25066); +#25065 = CARTESIAN_POINT('',(0.1,-38.4,-2.5)); +#25066 = VECTOR('',#25067,1.); +#25067 = DIRECTION('',(0.,0.,1.)); +#25068 = ORIENTED_EDGE('',*,*,#21576,.F.); +#25069 = ORIENTED_EDGE('',*,*,#25070,.T.); +#25070 = EDGE_CURVE('',#21569,#25071,#25073,.T.); +#25071 = VERTEX_POINT('',#25072); +#25072 = CARTESIAN_POINT('',(0.1,-37.8,-2.5)); +#25073 = LINE('',#25074,#25075); +#25074 = CARTESIAN_POINT('',(0.1,-37.8,0.2)); +#25075 = VECTOR('',#25076,1.); +#25076 = DIRECTION('',(0.,0.,-1.)); +#25077 = ORIENTED_EDGE('',*,*,#25078,.T.); +#25078 = EDGE_CURVE('',#25071,#25079,#25081,.T.); +#25079 = VERTEX_POINT('',#25080); +#25080 = CARTESIAN_POINT('',(0.1,-37.95,-3.1)); +#25081 = LINE('',#25082,#25083); +#25082 = CARTESIAN_POINT('',(0.1,-37.8,-2.5)); +#25083 = VECTOR('',#25084,1.); +#25084 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25085 = ORIENTED_EDGE('',*,*,#25086,.T.); +#25086 = EDGE_CURVE('',#25079,#25087,#25089,.T.); +#25087 = VERTEX_POINT('',#25088); +#25088 = CARTESIAN_POINT('',(0.1,-38.25,-3.1)); +#25089 = LINE('',#25090,#25091); +#25090 = CARTESIAN_POINT('',(0.1,-37.95,-3.1)); +#25091 = VECTOR('',#25092,1.); +#25092 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25093 = ORIENTED_EDGE('',*,*,#25094,.T.); +#25094 = EDGE_CURVE('',#25087,#25062,#25095,.T.); +#25095 = LINE('',#25096,#25097); +#25096 = CARTESIAN_POINT('',(0.1,-38.25,-3.1)); +#25097 = VECTOR('',#25098,1.); +#25098 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25099 = PLANE('',#25100); +#25100 = AXIS2_PLACEMENT_3D('',#25101,#25102,#25103); +#25101 = CARTESIAN_POINT('',(0.1,-38.1,3.911477598424)); +#25102 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25103 = DIRECTION('',(0.,0.,1.)); +#25104 = ADVANCED_FACE('',(#25105),#25116,.T.); +#25105 = FACE_BOUND('',#25106,.T.); +#25106 = EDGE_LOOP('',(#25107,#25113,#25114,#25115)); +#25107 = ORIENTED_EDGE('',*,*,#25108,.F.); +#25108 = EDGE_CURVE('',#21545,#21569,#25109,.T.); +#25109 = LINE('',#25110,#25111); +#25110 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#25111 = VECTOR('',#25112,1.); +#25112 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25113 = ORIENTED_EDGE('',*,*,#21552,.T.); +#25114 = ORIENTED_EDGE('',*,*,#21560,.T.); +#25115 = ORIENTED_EDGE('',*,*,#21568,.T.); +#25116 = PLANE('',#25117); +#25117 = AXIS2_PLACEMENT_3D('',#25118,#25119,#25120); +#25118 = CARTESIAN_POINT('',(-0.1,-38.4,0.2)); +#25119 = DIRECTION('',(0.,-0.,-1.)); +#25120 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25121 = ADVANCED_FACE('',(#25122),#25163,.T.); +#25122 = FACE_BOUND('',#25123,.T.); +#25123 = EDGE_LOOP('',(#25124,#25132,#25133,#25141,#25149,#25157)); +#25124 = ORIENTED_EDGE('',*,*,#25125,.T.); +#25125 = EDGE_CURVE('',#25126,#21537,#25128,.T.); +#25126 = VERTEX_POINT('',#25127); +#25127 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#25128 = LINE('',#25129,#25130); +#25129 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#25130 = VECTOR('',#25131,1.); +#25131 = DIRECTION('',(0.,0.,1.)); +#25132 = ORIENTED_EDGE('',*,*,#21544,.F.); +#25133 = ORIENTED_EDGE('',*,*,#25134,.T.); +#25134 = EDGE_CURVE('',#21545,#25135,#25137,.T.); +#25135 = VERTEX_POINT('',#25136); +#25136 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#25137 = LINE('',#25138,#25139); +#25138 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#25139 = VECTOR('',#25140,1.); +#25140 = DIRECTION('',(0.,0.,-1.)); +#25141 = ORIENTED_EDGE('',*,*,#25142,.T.); +#25142 = EDGE_CURVE('',#25135,#25143,#25145,.T.); +#25143 = VERTEX_POINT('',#25144); +#25144 = CARTESIAN_POINT('',(-0.1,-37.95,-3.1)); +#25145 = LINE('',#25146,#25147); +#25146 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#25147 = VECTOR('',#25148,1.); +#25148 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25149 = ORIENTED_EDGE('',*,*,#25150,.F.); +#25150 = EDGE_CURVE('',#25151,#25143,#25153,.T.); +#25151 = VERTEX_POINT('',#25152); +#25152 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#25153 = LINE('',#25154,#25155); +#25154 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#25155 = VECTOR('',#25156,1.); +#25156 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25157 = ORIENTED_EDGE('',*,*,#25158,.T.); +#25158 = EDGE_CURVE('',#25151,#25126,#25159,.T.); +#25159 = LINE('',#25160,#25161); +#25160 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#25161 = VECTOR('',#25162,1.); +#25162 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25163 = PLANE('',#25164); +#25164 = AXIS2_PLACEMENT_3D('',#25165,#25166,#25167); +#25165 = CARTESIAN_POINT('',(-0.1,-38.1,3.911477598424)); +#25166 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25167 = DIRECTION('',(0.,0.,1.)); +#25168 = ADVANCED_FACE('',(#25169),#25180,.T.); +#25169 = FACE_BOUND('',#25170,.T.); +#25170 = EDGE_LOOP('',(#25171,#25172,#25173,#25179)); +#25171 = ORIENTED_EDGE('',*,*,#21592,.F.); +#25172 = ORIENTED_EDGE('',*,*,#21602,.T.); +#25173 = ORIENTED_EDGE('',*,*,#25174,.T.); +#25174 = EDGE_CURVE('',#21603,#21643,#25175,.T.); +#25175 = LINE('',#25176,#25177); +#25176 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#25177 = VECTOR('',#25178,1.); +#25178 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25179 = ORIENTED_EDGE('',*,*,#21650,.T.); +#25180 = PLANE('',#25181); +#25181 = AXIS2_PLACEMENT_3D('',#25182,#25183,#25184); +#25182 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#25183 = DIRECTION('',(0.,-0.,-1.)); +#25184 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25185 = ADVANCED_FACE('',(#25186),#25227,.F.); +#25186 = FACE_BOUND('',#25187,.F.); +#25187 = EDGE_LOOP('',(#25188,#25196,#25197,#25205,#25213,#25221)); +#25188 = ORIENTED_EDGE('',*,*,#25189,.T.); +#25189 = EDGE_CURVE('',#25190,#21643,#25192,.T.); +#25190 = VERTEX_POINT('',#25191); +#25191 = CARTESIAN_POINT('',(0.1,-35.86,-2.5)); +#25192 = LINE('',#25193,#25194); +#25193 = CARTESIAN_POINT('',(0.1,-35.86,-2.5)); +#25194 = VECTOR('',#25195,1.); +#25195 = DIRECTION('',(0.,0.,1.)); +#25196 = ORIENTED_EDGE('',*,*,#21642,.F.); +#25197 = ORIENTED_EDGE('',*,*,#25198,.T.); +#25198 = EDGE_CURVE('',#21635,#25199,#25201,.T.); +#25199 = VERTEX_POINT('',#25200); +#25200 = CARTESIAN_POINT('',(0.1,-35.26,-2.5)); +#25201 = LINE('',#25202,#25203); +#25202 = CARTESIAN_POINT('',(0.1,-35.26,0.2)); +#25203 = VECTOR('',#25204,1.); +#25204 = DIRECTION('',(0.,0.,-1.)); +#25205 = ORIENTED_EDGE('',*,*,#25206,.T.); +#25206 = EDGE_CURVE('',#25199,#25207,#25209,.T.); +#25207 = VERTEX_POINT('',#25208); +#25208 = CARTESIAN_POINT('',(0.1,-35.41,-3.1)); +#25209 = LINE('',#25210,#25211); +#25210 = CARTESIAN_POINT('',(0.1,-35.26,-2.5)); +#25211 = VECTOR('',#25212,1.); +#25212 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25213 = ORIENTED_EDGE('',*,*,#25214,.T.); +#25214 = EDGE_CURVE('',#25207,#25215,#25217,.T.); +#25215 = VERTEX_POINT('',#25216); +#25216 = CARTESIAN_POINT('',(0.1,-35.71,-3.1)); +#25217 = LINE('',#25218,#25219); +#25218 = CARTESIAN_POINT('',(0.1,-35.41,-3.1)); +#25219 = VECTOR('',#25220,1.); +#25220 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25221 = ORIENTED_EDGE('',*,*,#25222,.T.); +#25222 = EDGE_CURVE('',#25215,#25190,#25223,.T.); +#25223 = LINE('',#25224,#25225); +#25224 = CARTESIAN_POINT('',(0.1,-35.71,-3.1)); +#25225 = VECTOR('',#25226,1.); +#25226 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25227 = PLANE('',#25228); +#25228 = AXIS2_PLACEMENT_3D('',#25229,#25230,#25231); +#25229 = CARTESIAN_POINT('',(0.1,-35.56,3.911477598424)); +#25230 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25231 = DIRECTION('',(0.,0.,1.)); +#25232 = ADVANCED_FACE('',(#25233),#25244,.T.); +#25233 = FACE_BOUND('',#25234,.T.); +#25234 = EDGE_LOOP('',(#25235,#25241,#25242,#25243)); +#25235 = ORIENTED_EDGE('',*,*,#25236,.F.); +#25236 = EDGE_CURVE('',#21611,#21635,#25237,.T.); +#25237 = LINE('',#25238,#25239); +#25238 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#25239 = VECTOR('',#25240,1.); +#25240 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25241 = ORIENTED_EDGE('',*,*,#21618,.T.); +#25242 = ORIENTED_EDGE('',*,*,#21626,.T.); +#25243 = ORIENTED_EDGE('',*,*,#21634,.T.); +#25244 = PLANE('',#25245); +#25245 = AXIS2_PLACEMENT_3D('',#25246,#25247,#25248); +#25246 = CARTESIAN_POINT('',(-0.1,-35.86,0.2)); +#25247 = DIRECTION('',(0.,-0.,-1.)); +#25248 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25249 = ADVANCED_FACE('',(#25250),#25291,.T.); +#25250 = FACE_BOUND('',#25251,.T.); +#25251 = EDGE_LOOP('',(#25252,#25260,#25261,#25269,#25277,#25285)); +#25252 = ORIENTED_EDGE('',*,*,#25253,.T.); +#25253 = EDGE_CURVE('',#25254,#21603,#25256,.T.); +#25254 = VERTEX_POINT('',#25255); +#25255 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#25256 = LINE('',#25257,#25258); +#25257 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#25258 = VECTOR('',#25259,1.); +#25259 = DIRECTION('',(0.,0.,1.)); +#25260 = ORIENTED_EDGE('',*,*,#21610,.F.); +#25261 = ORIENTED_EDGE('',*,*,#25262,.T.); +#25262 = EDGE_CURVE('',#21611,#25263,#25265,.T.); +#25263 = VERTEX_POINT('',#25264); +#25264 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#25265 = LINE('',#25266,#25267); +#25266 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#25267 = VECTOR('',#25268,1.); +#25268 = DIRECTION('',(0.,0.,-1.)); +#25269 = ORIENTED_EDGE('',*,*,#25270,.T.); +#25270 = EDGE_CURVE('',#25263,#25271,#25273,.T.); +#25271 = VERTEX_POINT('',#25272); +#25272 = CARTESIAN_POINT('',(-0.1,-35.41,-3.1)); +#25273 = LINE('',#25274,#25275); +#25274 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#25275 = VECTOR('',#25276,1.); +#25276 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25277 = ORIENTED_EDGE('',*,*,#25278,.F.); +#25278 = EDGE_CURVE('',#25279,#25271,#25281,.T.); +#25279 = VERTEX_POINT('',#25280); +#25280 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#25281 = LINE('',#25282,#25283); +#25282 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#25283 = VECTOR('',#25284,1.); +#25284 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25285 = ORIENTED_EDGE('',*,*,#25286,.T.); +#25286 = EDGE_CURVE('',#25279,#25254,#25287,.T.); +#25287 = LINE('',#25288,#25289); +#25288 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#25289 = VECTOR('',#25290,1.); +#25290 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25291 = PLANE('',#25292); +#25292 = AXIS2_PLACEMENT_3D('',#25293,#25294,#25295); +#25293 = CARTESIAN_POINT('',(-0.1,-35.56,3.911477598424)); +#25294 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25295 = DIRECTION('',(0.,0.,1.)); +#25296 = ADVANCED_FACE('',(#25297),#25308,.T.); +#25297 = FACE_BOUND('',#25298,.T.); +#25298 = EDGE_LOOP('',(#25299,#25300,#25301,#25307)); +#25299 = ORIENTED_EDGE('',*,*,#21658,.F.); +#25300 = ORIENTED_EDGE('',*,*,#21668,.T.); +#25301 = ORIENTED_EDGE('',*,*,#25302,.T.); +#25302 = EDGE_CURVE('',#21669,#21709,#25303,.T.); +#25303 = LINE('',#25304,#25305); +#25304 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#25305 = VECTOR('',#25306,1.); +#25306 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25307 = ORIENTED_EDGE('',*,*,#21716,.T.); +#25308 = PLANE('',#25309); +#25309 = AXIS2_PLACEMENT_3D('',#25310,#25311,#25312); +#25310 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#25311 = DIRECTION('',(0.,-0.,-1.)); +#25312 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25313 = ADVANCED_FACE('',(#25314),#25355,.F.); +#25314 = FACE_BOUND('',#25315,.F.); +#25315 = EDGE_LOOP('',(#25316,#25324,#25325,#25333,#25341,#25349)); +#25316 = ORIENTED_EDGE('',*,*,#25317,.T.); +#25317 = EDGE_CURVE('',#25318,#21709,#25320,.T.); +#25318 = VERTEX_POINT('',#25319); +#25319 = CARTESIAN_POINT('',(0.1,-33.32,-2.5)); +#25320 = LINE('',#25321,#25322); +#25321 = CARTESIAN_POINT('',(0.1,-33.32,-2.5)); +#25322 = VECTOR('',#25323,1.); +#25323 = DIRECTION('',(0.,0.,1.)); +#25324 = ORIENTED_EDGE('',*,*,#21708,.F.); +#25325 = ORIENTED_EDGE('',*,*,#25326,.T.); +#25326 = EDGE_CURVE('',#21701,#25327,#25329,.T.); +#25327 = VERTEX_POINT('',#25328); +#25328 = CARTESIAN_POINT('',(0.1,-32.72,-2.5)); +#25329 = LINE('',#25330,#25331); +#25330 = CARTESIAN_POINT('',(0.1,-32.72,0.2)); +#25331 = VECTOR('',#25332,1.); +#25332 = DIRECTION('',(0.,0.,-1.)); +#25333 = ORIENTED_EDGE('',*,*,#25334,.T.); +#25334 = EDGE_CURVE('',#25327,#25335,#25337,.T.); +#25335 = VERTEX_POINT('',#25336); +#25336 = CARTESIAN_POINT('',(0.1,-32.87,-3.1)); +#25337 = LINE('',#25338,#25339); +#25338 = CARTESIAN_POINT('',(0.1,-32.72,-2.5)); +#25339 = VECTOR('',#25340,1.); +#25340 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25341 = ORIENTED_EDGE('',*,*,#25342,.T.); +#25342 = EDGE_CURVE('',#25335,#25343,#25345,.T.); +#25343 = VERTEX_POINT('',#25344); +#25344 = CARTESIAN_POINT('',(0.1,-33.17,-3.1)); +#25345 = LINE('',#25346,#25347); +#25346 = CARTESIAN_POINT('',(0.1,-32.87,-3.1)); +#25347 = VECTOR('',#25348,1.); +#25348 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25349 = ORIENTED_EDGE('',*,*,#25350,.T.); +#25350 = EDGE_CURVE('',#25343,#25318,#25351,.T.); +#25351 = LINE('',#25352,#25353); +#25352 = CARTESIAN_POINT('',(0.1,-33.17,-3.1)); +#25353 = VECTOR('',#25354,1.); +#25354 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25355 = PLANE('',#25356); +#25356 = AXIS2_PLACEMENT_3D('',#25357,#25358,#25359); +#25357 = CARTESIAN_POINT('',(0.1,-33.02,3.911477598424)); +#25358 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25359 = DIRECTION('',(0.,0.,1.)); +#25360 = ADVANCED_FACE('',(#25361),#25372,.T.); +#25361 = FACE_BOUND('',#25362,.T.); +#25362 = EDGE_LOOP('',(#25363,#25369,#25370,#25371)); +#25363 = ORIENTED_EDGE('',*,*,#25364,.F.); +#25364 = EDGE_CURVE('',#21677,#21701,#25365,.T.); +#25365 = LINE('',#25366,#25367); +#25366 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#25367 = VECTOR('',#25368,1.); +#25368 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25369 = ORIENTED_EDGE('',*,*,#21684,.T.); +#25370 = ORIENTED_EDGE('',*,*,#21692,.T.); +#25371 = ORIENTED_EDGE('',*,*,#21700,.T.); +#25372 = PLANE('',#25373); +#25373 = AXIS2_PLACEMENT_3D('',#25374,#25375,#25376); +#25374 = CARTESIAN_POINT('',(-0.1,-33.32,0.2)); +#25375 = DIRECTION('',(0.,-0.,-1.)); +#25376 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25377 = ADVANCED_FACE('',(#25378),#25419,.T.); +#25378 = FACE_BOUND('',#25379,.T.); +#25379 = EDGE_LOOP('',(#25380,#25388,#25389,#25397,#25405,#25413)); +#25380 = ORIENTED_EDGE('',*,*,#25381,.T.); +#25381 = EDGE_CURVE('',#25382,#21669,#25384,.T.); +#25382 = VERTEX_POINT('',#25383); +#25383 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#25384 = LINE('',#25385,#25386); +#25385 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#25386 = VECTOR('',#25387,1.); +#25387 = DIRECTION('',(0.,0.,1.)); +#25388 = ORIENTED_EDGE('',*,*,#21676,.F.); +#25389 = ORIENTED_EDGE('',*,*,#25390,.T.); +#25390 = EDGE_CURVE('',#21677,#25391,#25393,.T.); +#25391 = VERTEX_POINT('',#25392); +#25392 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#25393 = LINE('',#25394,#25395); +#25394 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#25395 = VECTOR('',#25396,1.); +#25396 = DIRECTION('',(0.,0.,-1.)); +#25397 = ORIENTED_EDGE('',*,*,#25398,.T.); +#25398 = EDGE_CURVE('',#25391,#25399,#25401,.T.); +#25399 = VERTEX_POINT('',#25400); +#25400 = CARTESIAN_POINT('',(-0.1,-32.87,-3.1)); +#25401 = LINE('',#25402,#25403); +#25402 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#25403 = VECTOR('',#25404,1.); +#25404 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25405 = ORIENTED_EDGE('',*,*,#25406,.F.); +#25406 = EDGE_CURVE('',#25407,#25399,#25409,.T.); +#25407 = VERTEX_POINT('',#25408); +#25408 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#25409 = LINE('',#25410,#25411); +#25410 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#25411 = VECTOR('',#25412,1.); +#25412 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25413 = ORIENTED_EDGE('',*,*,#25414,.T.); +#25414 = EDGE_CURVE('',#25407,#25382,#25415,.T.); +#25415 = LINE('',#25416,#25417); +#25416 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#25417 = VECTOR('',#25418,1.); +#25418 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25419 = PLANE('',#25420); +#25420 = AXIS2_PLACEMENT_3D('',#25421,#25422,#25423); +#25421 = CARTESIAN_POINT('',(-0.1,-33.02,3.911477598424)); +#25422 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25423 = DIRECTION('',(0.,0.,1.)); +#25424 = ADVANCED_FACE('',(#25425),#25436,.T.); +#25425 = FACE_BOUND('',#25426,.T.); +#25426 = EDGE_LOOP('',(#25427,#25428,#25429,#25435)); +#25427 = ORIENTED_EDGE('',*,*,#21724,.F.); +#25428 = ORIENTED_EDGE('',*,*,#21734,.T.); +#25429 = ORIENTED_EDGE('',*,*,#25430,.T.); +#25430 = EDGE_CURVE('',#21735,#21775,#25431,.T.); +#25431 = LINE('',#25432,#25433); +#25432 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#25433 = VECTOR('',#25434,1.); +#25434 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25435 = ORIENTED_EDGE('',*,*,#21782,.T.); +#25436 = PLANE('',#25437); +#25437 = AXIS2_PLACEMENT_3D('',#25438,#25439,#25440); +#25438 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#25439 = DIRECTION('',(0.,-0.,-1.)); +#25440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25441 = ADVANCED_FACE('',(#25442),#25483,.F.); +#25442 = FACE_BOUND('',#25443,.F.); +#25443 = EDGE_LOOP('',(#25444,#25452,#25453,#25461,#25469,#25477)); +#25444 = ORIENTED_EDGE('',*,*,#25445,.T.); +#25445 = EDGE_CURVE('',#25446,#21775,#25448,.T.); +#25446 = VERTEX_POINT('',#25447); +#25447 = CARTESIAN_POINT('',(0.1,-30.78,-2.5)); +#25448 = LINE('',#25449,#25450); +#25449 = CARTESIAN_POINT('',(0.1,-30.78,-2.5)); +#25450 = VECTOR('',#25451,1.); +#25451 = DIRECTION('',(0.,0.,1.)); +#25452 = ORIENTED_EDGE('',*,*,#21774,.F.); +#25453 = ORIENTED_EDGE('',*,*,#25454,.T.); +#25454 = EDGE_CURVE('',#21767,#25455,#25457,.T.); +#25455 = VERTEX_POINT('',#25456); +#25456 = CARTESIAN_POINT('',(0.1,-30.18,-2.5)); +#25457 = LINE('',#25458,#25459); +#25458 = CARTESIAN_POINT('',(0.1,-30.18,0.2)); +#25459 = VECTOR('',#25460,1.); +#25460 = DIRECTION('',(0.,0.,-1.)); +#25461 = ORIENTED_EDGE('',*,*,#25462,.T.); +#25462 = EDGE_CURVE('',#25455,#25463,#25465,.T.); +#25463 = VERTEX_POINT('',#25464); +#25464 = CARTESIAN_POINT('',(0.1,-30.33,-3.1)); +#25465 = LINE('',#25466,#25467); +#25466 = CARTESIAN_POINT('',(0.1,-30.18,-2.5)); +#25467 = VECTOR('',#25468,1.); +#25468 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25469 = ORIENTED_EDGE('',*,*,#25470,.T.); +#25470 = EDGE_CURVE('',#25463,#25471,#25473,.T.); +#25471 = VERTEX_POINT('',#25472); +#25472 = CARTESIAN_POINT('',(0.1,-30.63,-3.1)); +#25473 = LINE('',#25474,#25475); +#25474 = CARTESIAN_POINT('',(0.1,-30.33,-3.1)); +#25475 = VECTOR('',#25476,1.); +#25476 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25477 = ORIENTED_EDGE('',*,*,#25478,.T.); +#25478 = EDGE_CURVE('',#25471,#25446,#25479,.T.); +#25479 = LINE('',#25480,#25481); +#25480 = CARTESIAN_POINT('',(0.1,-30.63,-3.1)); +#25481 = VECTOR('',#25482,1.); +#25482 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25483 = PLANE('',#25484); +#25484 = AXIS2_PLACEMENT_3D('',#25485,#25486,#25487); +#25485 = CARTESIAN_POINT('',(0.1,-30.48,3.911477598424)); +#25486 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25487 = DIRECTION('',(0.,0.,1.)); +#25488 = ADVANCED_FACE('',(#25489),#25500,.T.); +#25489 = FACE_BOUND('',#25490,.T.); +#25490 = EDGE_LOOP('',(#25491,#25497,#25498,#25499)); +#25491 = ORIENTED_EDGE('',*,*,#25492,.F.); +#25492 = EDGE_CURVE('',#21743,#21767,#25493,.T.); +#25493 = LINE('',#25494,#25495); +#25494 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#25495 = VECTOR('',#25496,1.); +#25496 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25497 = ORIENTED_EDGE('',*,*,#21750,.T.); +#25498 = ORIENTED_EDGE('',*,*,#21758,.T.); +#25499 = ORIENTED_EDGE('',*,*,#21766,.T.); +#25500 = PLANE('',#25501); +#25501 = AXIS2_PLACEMENT_3D('',#25502,#25503,#25504); +#25502 = CARTESIAN_POINT('',(-0.1,-30.78,0.2)); +#25503 = DIRECTION('',(0.,-0.,-1.)); +#25504 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25505 = ADVANCED_FACE('',(#25506),#25547,.T.); +#25506 = FACE_BOUND('',#25507,.T.); +#25507 = EDGE_LOOP('',(#25508,#25516,#25517,#25525,#25533,#25541)); +#25508 = ORIENTED_EDGE('',*,*,#25509,.T.); +#25509 = EDGE_CURVE('',#25510,#21735,#25512,.T.); +#25510 = VERTEX_POINT('',#25511); +#25511 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#25512 = LINE('',#25513,#25514); +#25513 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#25514 = VECTOR('',#25515,1.); +#25515 = DIRECTION('',(0.,0.,1.)); +#25516 = ORIENTED_EDGE('',*,*,#21742,.F.); +#25517 = ORIENTED_EDGE('',*,*,#25518,.T.); +#25518 = EDGE_CURVE('',#21743,#25519,#25521,.T.); +#25519 = VERTEX_POINT('',#25520); +#25520 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#25521 = LINE('',#25522,#25523); +#25522 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#25523 = VECTOR('',#25524,1.); +#25524 = DIRECTION('',(0.,0.,-1.)); +#25525 = ORIENTED_EDGE('',*,*,#25526,.T.); +#25526 = EDGE_CURVE('',#25519,#25527,#25529,.T.); +#25527 = VERTEX_POINT('',#25528); +#25528 = CARTESIAN_POINT('',(-0.1,-30.33,-3.1)); +#25529 = LINE('',#25530,#25531); +#25530 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#25531 = VECTOR('',#25532,1.); +#25532 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25533 = ORIENTED_EDGE('',*,*,#25534,.F.); +#25534 = EDGE_CURVE('',#25535,#25527,#25537,.T.); +#25535 = VERTEX_POINT('',#25536); +#25536 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#25537 = LINE('',#25538,#25539); +#25538 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#25539 = VECTOR('',#25540,1.); +#25540 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25541 = ORIENTED_EDGE('',*,*,#25542,.T.); +#25542 = EDGE_CURVE('',#25535,#25510,#25543,.T.); +#25543 = LINE('',#25544,#25545); +#25544 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#25545 = VECTOR('',#25546,1.); +#25546 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25547 = PLANE('',#25548); +#25548 = AXIS2_PLACEMENT_3D('',#25549,#25550,#25551); +#25549 = CARTESIAN_POINT('',(-0.1,-30.48,3.911477598424)); +#25550 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25551 = DIRECTION('',(0.,0.,1.)); +#25552 = ADVANCED_FACE('',(#25553),#25564,.T.); +#25553 = FACE_BOUND('',#25554,.T.); +#25554 = EDGE_LOOP('',(#25555,#25556,#25557,#25563)); +#25555 = ORIENTED_EDGE('',*,*,#21790,.F.); +#25556 = ORIENTED_EDGE('',*,*,#21800,.T.); +#25557 = ORIENTED_EDGE('',*,*,#25558,.T.); +#25558 = EDGE_CURVE('',#21801,#21841,#25559,.T.); +#25559 = LINE('',#25560,#25561); +#25560 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#25561 = VECTOR('',#25562,1.); +#25562 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25563 = ORIENTED_EDGE('',*,*,#21848,.T.); +#25564 = PLANE('',#25565); +#25565 = AXIS2_PLACEMENT_3D('',#25566,#25567,#25568); +#25566 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#25567 = DIRECTION('',(0.,-0.,-1.)); +#25568 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25569 = ADVANCED_FACE('',(#25570),#25611,.F.); +#25570 = FACE_BOUND('',#25571,.F.); +#25571 = EDGE_LOOP('',(#25572,#25580,#25581,#25589,#25597,#25605)); +#25572 = ORIENTED_EDGE('',*,*,#25573,.T.); +#25573 = EDGE_CURVE('',#25574,#21841,#25576,.T.); +#25574 = VERTEX_POINT('',#25575); +#25575 = CARTESIAN_POINT('',(0.1,-28.24,-2.5)); +#25576 = LINE('',#25577,#25578); +#25577 = CARTESIAN_POINT('',(0.1,-28.24,-2.5)); +#25578 = VECTOR('',#25579,1.); +#25579 = DIRECTION('',(0.,0.,1.)); +#25580 = ORIENTED_EDGE('',*,*,#21840,.F.); +#25581 = ORIENTED_EDGE('',*,*,#25582,.T.); +#25582 = EDGE_CURVE('',#21833,#25583,#25585,.T.); +#25583 = VERTEX_POINT('',#25584); +#25584 = CARTESIAN_POINT('',(0.1,-27.64,-2.5)); +#25585 = LINE('',#25586,#25587); +#25586 = CARTESIAN_POINT('',(0.1,-27.64,0.2)); +#25587 = VECTOR('',#25588,1.); +#25588 = DIRECTION('',(0.,0.,-1.)); +#25589 = ORIENTED_EDGE('',*,*,#25590,.T.); +#25590 = EDGE_CURVE('',#25583,#25591,#25593,.T.); +#25591 = VERTEX_POINT('',#25592); +#25592 = CARTESIAN_POINT('',(0.1,-27.79,-3.1)); +#25593 = LINE('',#25594,#25595); +#25594 = CARTESIAN_POINT('',(0.1,-27.64,-2.5)); +#25595 = VECTOR('',#25596,1.); +#25596 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25597 = ORIENTED_EDGE('',*,*,#25598,.T.); +#25598 = EDGE_CURVE('',#25591,#25599,#25601,.T.); +#25599 = VERTEX_POINT('',#25600); +#25600 = CARTESIAN_POINT('',(0.1,-28.09,-3.1)); +#25601 = LINE('',#25602,#25603); +#25602 = CARTESIAN_POINT('',(0.1,-27.79,-3.1)); +#25603 = VECTOR('',#25604,1.); +#25604 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25605 = ORIENTED_EDGE('',*,*,#25606,.T.); +#25606 = EDGE_CURVE('',#25599,#25574,#25607,.T.); +#25607 = LINE('',#25608,#25609); +#25608 = CARTESIAN_POINT('',(0.1,-28.09,-3.1)); +#25609 = VECTOR('',#25610,1.); +#25610 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25611 = PLANE('',#25612); +#25612 = AXIS2_PLACEMENT_3D('',#25613,#25614,#25615); +#25613 = CARTESIAN_POINT('',(0.1,-27.94,3.911477598424)); +#25614 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25615 = DIRECTION('',(0.,0.,1.)); +#25616 = ADVANCED_FACE('',(#25617),#25628,.T.); +#25617 = FACE_BOUND('',#25618,.T.); +#25618 = EDGE_LOOP('',(#25619,#25625,#25626,#25627)); +#25619 = ORIENTED_EDGE('',*,*,#25620,.F.); +#25620 = EDGE_CURVE('',#21809,#21833,#25621,.T.); +#25621 = LINE('',#25622,#25623); +#25622 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#25623 = VECTOR('',#25624,1.); +#25624 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25625 = ORIENTED_EDGE('',*,*,#21816,.T.); +#25626 = ORIENTED_EDGE('',*,*,#21824,.T.); +#25627 = ORIENTED_EDGE('',*,*,#21832,.T.); +#25628 = PLANE('',#25629); +#25629 = AXIS2_PLACEMENT_3D('',#25630,#25631,#25632); +#25630 = CARTESIAN_POINT('',(-0.1,-28.24,0.2)); +#25631 = DIRECTION('',(0.,-0.,-1.)); +#25632 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25633 = ADVANCED_FACE('',(#25634),#25675,.T.); +#25634 = FACE_BOUND('',#25635,.T.); +#25635 = EDGE_LOOP('',(#25636,#25644,#25645,#25653,#25661,#25669)); +#25636 = ORIENTED_EDGE('',*,*,#25637,.T.); +#25637 = EDGE_CURVE('',#25638,#21801,#25640,.T.); +#25638 = VERTEX_POINT('',#25639); +#25639 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#25640 = LINE('',#25641,#25642); +#25641 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#25642 = VECTOR('',#25643,1.); +#25643 = DIRECTION('',(0.,0.,1.)); +#25644 = ORIENTED_EDGE('',*,*,#21808,.F.); +#25645 = ORIENTED_EDGE('',*,*,#25646,.T.); +#25646 = EDGE_CURVE('',#21809,#25647,#25649,.T.); +#25647 = VERTEX_POINT('',#25648); +#25648 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#25649 = LINE('',#25650,#25651); +#25650 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#25651 = VECTOR('',#25652,1.); +#25652 = DIRECTION('',(0.,0.,-1.)); +#25653 = ORIENTED_EDGE('',*,*,#25654,.T.); +#25654 = EDGE_CURVE('',#25647,#25655,#25657,.T.); +#25655 = VERTEX_POINT('',#25656); +#25656 = CARTESIAN_POINT('',(-0.1,-27.79,-3.1)); +#25657 = LINE('',#25658,#25659); +#25658 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#25659 = VECTOR('',#25660,1.); +#25660 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25661 = ORIENTED_EDGE('',*,*,#25662,.F.); +#25662 = EDGE_CURVE('',#25663,#25655,#25665,.T.); +#25663 = VERTEX_POINT('',#25664); +#25664 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#25665 = LINE('',#25666,#25667); +#25666 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#25667 = VECTOR('',#25668,1.); +#25668 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25669 = ORIENTED_EDGE('',*,*,#25670,.T.); +#25670 = EDGE_CURVE('',#25663,#25638,#25671,.T.); +#25671 = LINE('',#25672,#25673); +#25672 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#25673 = VECTOR('',#25674,1.); +#25674 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25675 = PLANE('',#25676); +#25676 = AXIS2_PLACEMENT_3D('',#25677,#25678,#25679); +#25677 = CARTESIAN_POINT('',(-0.1,-27.94,3.911477598424)); +#25678 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25679 = DIRECTION('',(0.,0.,1.)); +#25680 = ADVANCED_FACE('',(#25681),#25692,.T.); +#25681 = FACE_BOUND('',#25682,.T.); +#25682 = EDGE_LOOP('',(#25683,#25684,#25685,#25691)); +#25683 = ORIENTED_EDGE('',*,*,#21856,.F.); +#25684 = ORIENTED_EDGE('',*,*,#21866,.T.); +#25685 = ORIENTED_EDGE('',*,*,#25686,.T.); +#25686 = EDGE_CURVE('',#21867,#21907,#25687,.T.); +#25687 = LINE('',#25688,#25689); +#25688 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#25689 = VECTOR('',#25690,1.); +#25690 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25691 = ORIENTED_EDGE('',*,*,#21914,.T.); +#25692 = PLANE('',#25693); +#25693 = AXIS2_PLACEMENT_3D('',#25694,#25695,#25696); +#25694 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#25695 = DIRECTION('',(0.,-0.,-1.)); +#25696 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25697 = ADVANCED_FACE('',(#25698),#25739,.F.); +#25698 = FACE_BOUND('',#25699,.F.); +#25699 = EDGE_LOOP('',(#25700,#25708,#25709,#25717,#25725,#25733)); +#25700 = ORIENTED_EDGE('',*,*,#25701,.T.); +#25701 = EDGE_CURVE('',#25702,#21907,#25704,.T.); +#25702 = VERTEX_POINT('',#25703); +#25703 = CARTESIAN_POINT('',(0.1,-25.7,-2.5)); +#25704 = LINE('',#25705,#25706); +#25705 = CARTESIAN_POINT('',(0.1,-25.7,-2.5)); +#25706 = VECTOR('',#25707,1.); +#25707 = DIRECTION('',(0.,0.,1.)); +#25708 = ORIENTED_EDGE('',*,*,#21906,.F.); +#25709 = ORIENTED_EDGE('',*,*,#25710,.T.); +#25710 = EDGE_CURVE('',#21899,#25711,#25713,.T.); +#25711 = VERTEX_POINT('',#25712); +#25712 = CARTESIAN_POINT('',(0.1,-25.1,-2.5)); +#25713 = LINE('',#25714,#25715); +#25714 = CARTESIAN_POINT('',(0.1,-25.1,0.2)); +#25715 = VECTOR('',#25716,1.); +#25716 = DIRECTION('',(0.,0.,-1.)); +#25717 = ORIENTED_EDGE('',*,*,#25718,.T.); +#25718 = EDGE_CURVE('',#25711,#25719,#25721,.T.); +#25719 = VERTEX_POINT('',#25720); +#25720 = CARTESIAN_POINT('',(0.1,-25.25,-3.1)); +#25721 = LINE('',#25722,#25723); +#25722 = CARTESIAN_POINT('',(0.1,-25.1,-2.5)); +#25723 = VECTOR('',#25724,1.); +#25724 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25725 = ORIENTED_EDGE('',*,*,#25726,.T.); +#25726 = EDGE_CURVE('',#25719,#25727,#25729,.T.); +#25727 = VERTEX_POINT('',#25728); +#25728 = CARTESIAN_POINT('',(0.1,-25.55,-3.1)); +#25729 = LINE('',#25730,#25731); +#25730 = CARTESIAN_POINT('',(0.1,-25.25,-3.1)); +#25731 = VECTOR('',#25732,1.); +#25732 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25733 = ORIENTED_EDGE('',*,*,#25734,.T.); +#25734 = EDGE_CURVE('',#25727,#25702,#25735,.T.); +#25735 = LINE('',#25736,#25737); +#25736 = CARTESIAN_POINT('',(0.1,-25.55,-3.1)); +#25737 = VECTOR('',#25738,1.); +#25738 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25739 = PLANE('',#25740); +#25740 = AXIS2_PLACEMENT_3D('',#25741,#25742,#25743); +#25741 = CARTESIAN_POINT('',(0.1,-25.4,3.911477598424)); +#25742 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25743 = DIRECTION('',(0.,0.,1.)); +#25744 = ADVANCED_FACE('',(#25745),#25756,.T.); +#25745 = FACE_BOUND('',#25746,.T.); +#25746 = EDGE_LOOP('',(#25747,#25753,#25754,#25755)); +#25747 = ORIENTED_EDGE('',*,*,#25748,.F.); +#25748 = EDGE_CURVE('',#21875,#21899,#25749,.T.); +#25749 = LINE('',#25750,#25751); +#25750 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#25751 = VECTOR('',#25752,1.); +#25752 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25753 = ORIENTED_EDGE('',*,*,#21882,.T.); +#25754 = ORIENTED_EDGE('',*,*,#21890,.T.); +#25755 = ORIENTED_EDGE('',*,*,#21898,.T.); +#25756 = PLANE('',#25757); +#25757 = AXIS2_PLACEMENT_3D('',#25758,#25759,#25760); +#25758 = CARTESIAN_POINT('',(-0.1,-25.7,0.2)); +#25759 = DIRECTION('',(0.,-0.,-1.)); +#25760 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25761 = ADVANCED_FACE('',(#25762),#25803,.T.); +#25762 = FACE_BOUND('',#25763,.T.); +#25763 = EDGE_LOOP('',(#25764,#25772,#25773,#25781,#25789,#25797)); +#25764 = ORIENTED_EDGE('',*,*,#25765,.T.); +#25765 = EDGE_CURVE('',#25766,#21867,#25768,.T.); +#25766 = VERTEX_POINT('',#25767); +#25767 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#25768 = LINE('',#25769,#25770); +#25769 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#25770 = VECTOR('',#25771,1.); +#25771 = DIRECTION('',(0.,0.,1.)); +#25772 = ORIENTED_EDGE('',*,*,#21874,.F.); +#25773 = ORIENTED_EDGE('',*,*,#25774,.T.); +#25774 = EDGE_CURVE('',#21875,#25775,#25777,.T.); +#25775 = VERTEX_POINT('',#25776); +#25776 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#25777 = LINE('',#25778,#25779); +#25778 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#25779 = VECTOR('',#25780,1.); +#25780 = DIRECTION('',(0.,0.,-1.)); +#25781 = ORIENTED_EDGE('',*,*,#25782,.T.); +#25782 = EDGE_CURVE('',#25775,#25783,#25785,.T.); +#25783 = VERTEX_POINT('',#25784); +#25784 = CARTESIAN_POINT('',(-0.1,-25.25,-3.1)); +#25785 = LINE('',#25786,#25787); +#25786 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#25787 = VECTOR('',#25788,1.); +#25788 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25789 = ORIENTED_EDGE('',*,*,#25790,.F.); +#25790 = EDGE_CURVE('',#25791,#25783,#25793,.T.); +#25791 = VERTEX_POINT('',#25792); +#25792 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#25793 = LINE('',#25794,#25795); +#25794 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#25795 = VECTOR('',#25796,1.); +#25796 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25797 = ORIENTED_EDGE('',*,*,#25798,.T.); +#25798 = EDGE_CURVE('',#25791,#25766,#25799,.T.); +#25799 = LINE('',#25800,#25801); +#25800 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#25801 = VECTOR('',#25802,1.); +#25802 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25803 = PLANE('',#25804); +#25804 = AXIS2_PLACEMENT_3D('',#25805,#25806,#25807); +#25805 = CARTESIAN_POINT('',(-0.1,-25.4,3.911477598424)); +#25806 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25807 = DIRECTION('',(0.,0.,1.)); +#25808 = ADVANCED_FACE('',(#25809),#25820,.T.); +#25809 = FACE_BOUND('',#25810,.T.); +#25810 = EDGE_LOOP('',(#25811,#25812,#25813,#25819)); +#25811 = ORIENTED_EDGE('',*,*,#21922,.F.); +#25812 = ORIENTED_EDGE('',*,*,#21932,.T.); +#25813 = ORIENTED_EDGE('',*,*,#25814,.T.); +#25814 = EDGE_CURVE('',#21933,#21973,#25815,.T.); +#25815 = LINE('',#25816,#25817); +#25816 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#25817 = VECTOR('',#25818,1.); +#25818 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25819 = ORIENTED_EDGE('',*,*,#21980,.T.); +#25820 = PLANE('',#25821); +#25821 = AXIS2_PLACEMENT_3D('',#25822,#25823,#25824); +#25822 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#25823 = DIRECTION('',(0.,-0.,-1.)); +#25824 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25825 = ADVANCED_FACE('',(#25826),#25867,.F.); +#25826 = FACE_BOUND('',#25827,.F.); +#25827 = EDGE_LOOP('',(#25828,#25836,#25837,#25845,#25853,#25861)); +#25828 = ORIENTED_EDGE('',*,*,#25829,.T.); +#25829 = EDGE_CURVE('',#25830,#21973,#25832,.T.); +#25830 = VERTEX_POINT('',#25831); +#25831 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#25832 = LINE('',#25833,#25834); +#25833 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#25834 = VECTOR('',#25835,1.); +#25835 = DIRECTION('',(0.,0.,1.)); +#25836 = ORIENTED_EDGE('',*,*,#21972,.F.); +#25837 = ORIENTED_EDGE('',*,*,#25838,.T.); +#25838 = EDGE_CURVE('',#21965,#25839,#25841,.T.); +#25839 = VERTEX_POINT('',#25840); +#25840 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#25841 = LINE('',#25842,#25843); +#25842 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#25843 = VECTOR('',#25844,1.); +#25844 = DIRECTION('',(0.,0.,-1.)); +#25845 = ORIENTED_EDGE('',*,*,#25846,.T.); +#25846 = EDGE_CURVE('',#25839,#25847,#25849,.T.); +#25847 = VERTEX_POINT('',#25848); +#25848 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#25849 = LINE('',#25850,#25851); +#25850 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#25851 = VECTOR('',#25852,1.); +#25852 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25853 = ORIENTED_EDGE('',*,*,#25854,.T.); +#25854 = EDGE_CURVE('',#25847,#25855,#25857,.T.); +#25855 = VERTEX_POINT('',#25856); +#25856 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#25857 = LINE('',#25858,#25859); +#25858 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#25859 = VECTOR('',#25860,1.); +#25860 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25861 = ORIENTED_EDGE('',*,*,#25862,.T.); +#25862 = EDGE_CURVE('',#25855,#25830,#25863,.T.); +#25863 = LINE('',#25864,#25865); +#25864 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#25865 = VECTOR('',#25866,1.); +#25866 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25867 = PLANE('',#25868); +#25868 = AXIS2_PLACEMENT_3D('',#25869,#25870,#25871); +#25869 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#25870 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25871 = DIRECTION('',(0.,0.,1.)); +#25872 = ADVANCED_FACE('',(#25873),#25884,.T.); +#25873 = FACE_BOUND('',#25874,.T.); +#25874 = EDGE_LOOP('',(#25875,#25881,#25882,#25883)); +#25875 = ORIENTED_EDGE('',*,*,#25876,.F.); +#25876 = EDGE_CURVE('',#21941,#21965,#25877,.T.); +#25877 = LINE('',#25878,#25879); +#25878 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#25879 = VECTOR('',#25880,1.); +#25880 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25881 = ORIENTED_EDGE('',*,*,#21948,.T.); +#25882 = ORIENTED_EDGE('',*,*,#21956,.T.); +#25883 = ORIENTED_EDGE('',*,*,#21964,.T.); +#25884 = PLANE('',#25885); +#25885 = AXIS2_PLACEMENT_3D('',#25886,#25887,#25888); +#25886 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#25887 = DIRECTION('',(0.,-0.,-1.)); +#25888 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25889 = ADVANCED_FACE('',(#25890),#25931,.T.); +#25890 = FACE_BOUND('',#25891,.T.); +#25891 = EDGE_LOOP('',(#25892,#25900,#25901,#25909,#25917,#25925)); +#25892 = ORIENTED_EDGE('',*,*,#25893,.T.); +#25893 = EDGE_CURVE('',#25894,#21933,#25896,.T.); +#25894 = VERTEX_POINT('',#25895); +#25895 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#25896 = LINE('',#25897,#25898); +#25897 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#25898 = VECTOR('',#25899,1.); +#25899 = DIRECTION('',(0.,0.,1.)); +#25900 = ORIENTED_EDGE('',*,*,#21940,.F.); +#25901 = ORIENTED_EDGE('',*,*,#25902,.T.); +#25902 = EDGE_CURVE('',#21941,#25903,#25905,.T.); +#25903 = VERTEX_POINT('',#25904); +#25904 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#25905 = LINE('',#25906,#25907); +#25906 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#25907 = VECTOR('',#25908,1.); +#25908 = DIRECTION('',(0.,0.,-1.)); +#25909 = ORIENTED_EDGE('',*,*,#25910,.T.); +#25910 = EDGE_CURVE('',#25903,#25911,#25913,.T.); +#25911 = VERTEX_POINT('',#25912); +#25912 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#25913 = LINE('',#25914,#25915); +#25914 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#25915 = VECTOR('',#25916,1.); +#25916 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25917 = ORIENTED_EDGE('',*,*,#25918,.F.); +#25918 = EDGE_CURVE('',#25919,#25911,#25921,.T.); +#25919 = VERTEX_POINT('',#25920); +#25920 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#25921 = LINE('',#25922,#25923); +#25922 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#25923 = VECTOR('',#25924,1.); +#25924 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25925 = ORIENTED_EDGE('',*,*,#25926,.T.); +#25926 = EDGE_CURVE('',#25919,#25894,#25927,.T.); +#25927 = LINE('',#25928,#25929); +#25928 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#25929 = VECTOR('',#25930,1.); +#25930 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25931 = PLANE('',#25932); +#25932 = AXIS2_PLACEMENT_3D('',#25933,#25934,#25935); +#25933 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#25934 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25935 = DIRECTION('',(0.,0.,1.)); +#25936 = ADVANCED_FACE('',(#25937),#25948,.T.); +#25937 = FACE_BOUND('',#25938,.T.); +#25938 = EDGE_LOOP('',(#25939,#25940,#25941,#25947)); +#25939 = ORIENTED_EDGE('',*,*,#21988,.F.); +#25940 = ORIENTED_EDGE('',*,*,#21998,.T.); +#25941 = ORIENTED_EDGE('',*,*,#25942,.T.); +#25942 = EDGE_CURVE('',#21999,#22039,#25943,.T.); +#25943 = LINE('',#25944,#25945); +#25944 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#25945 = VECTOR('',#25946,1.); +#25946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25947 = ORIENTED_EDGE('',*,*,#22046,.T.); +#25948 = PLANE('',#25949); +#25949 = AXIS2_PLACEMENT_3D('',#25950,#25951,#25952); +#25950 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#25951 = DIRECTION('',(0.,-0.,-1.)); +#25952 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25953 = ADVANCED_FACE('',(#25954),#25995,.F.); +#25954 = FACE_BOUND('',#25955,.F.); +#25955 = EDGE_LOOP('',(#25956,#25964,#25965,#25973,#25981,#25989)); +#25956 = ORIENTED_EDGE('',*,*,#25957,.T.); +#25957 = EDGE_CURVE('',#25958,#22039,#25960,.T.); +#25958 = VERTEX_POINT('',#25959); +#25959 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#25960 = LINE('',#25961,#25962); +#25961 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#25962 = VECTOR('',#25963,1.); +#25963 = DIRECTION('',(0.,0.,1.)); +#25964 = ORIENTED_EDGE('',*,*,#22038,.F.); +#25965 = ORIENTED_EDGE('',*,*,#25966,.T.); +#25966 = EDGE_CURVE('',#22031,#25967,#25969,.T.); +#25967 = VERTEX_POINT('',#25968); +#25968 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#25969 = LINE('',#25970,#25971); +#25970 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#25971 = VECTOR('',#25972,1.); +#25972 = DIRECTION('',(0.,0.,-1.)); +#25973 = ORIENTED_EDGE('',*,*,#25974,.T.); +#25974 = EDGE_CURVE('',#25967,#25975,#25977,.T.); +#25975 = VERTEX_POINT('',#25976); +#25976 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#25977 = LINE('',#25978,#25979); +#25978 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#25979 = VECTOR('',#25980,1.); +#25980 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#25981 = ORIENTED_EDGE('',*,*,#25982,.T.); +#25982 = EDGE_CURVE('',#25975,#25983,#25985,.T.); +#25983 = VERTEX_POINT('',#25984); +#25984 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#25985 = LINE('',#25986,#25987); +#25986 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#25987 = VECTOR('',#25988,1.); +#25988 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25989 = ORIENTED_EDGE('',*,*,#25990,.T.); +#25990 = EDGE_CURVE('',#25983,#25958,#25991,.T.); +#25991 = LINE('',#25992,#25993); +#25992 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#25993 = VECTOR('',#25994,1.); +#25994 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#25995 = PLANE('',#25996); +#25996 = AXIS2_PLACEMENT_3D('',#25997,#25998,#25999); +#25997 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#25998 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25999 = DIRECTION('',(0.,0.,1.)); +#26000 = ADVANCED_FACE('',(#26001),#26012,.T.); +#26001 = FACE_BOUND('',#26002,.T.); +#26002 = EDGE_LOOP('',(#26003,#26009,#26010,#26011)); +#26003 = ORIENTED_EDGE('',*,*,#26004,.F.); +#26004 = EDGE_CURVE('',#22007,#22031,#26005,.T.); +#26005 = LINE('',#26006,#26007); +#26006 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#26007 = VECTOR('',#26008,1.); +#26008 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26009 = ORIENTED_EDGE('',*,*,#22014,.T.); +#26010 = ORIENTED_EDGE('',*,*,#22022,.T.); +#26011 = ORIENTED_EDGE('',*,*,#22030,.T.); +#26012 = PLANE('',#26013); +#26013 = AXIS2_PLACEMENT_3D('',#26014,#26015,#26016); +#26014 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#26015 = DIRECTION('',(0.,-0.,-1.)); +#26016 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26017 = ADVANCED_FACE('',(#26018),#26059,.T.); +#26018 = FACE_BOUND('',#26019,.T.); +#26019 = EDGE_LOOP('',(#26020,#26028,#26029,#26037,#26045,#26053)); +#26020 = ORIENTED_EDGE('',*,*,#26021,.T.); +#26021 = EDGE_CURVE('',#26022,#21999,#26024,.T.); +#26022 = VERTEX_POINT('',#26023); +#26023 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#26024 = LINE('',#26025,#26026); +#26025 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#26026 = VECTOR('',#26027,1.); +#26027 = DIRECTION('',(0.,0.,1.)); +#26028 = ORIENTED_EDGE('',*,*,#22006,.F.); +#26029 = ORIENTED_EDGE('',*,*,#26030,.T.); +#26030 = EDGE_CURVE('',#22007,#26031,#26033,.T.); +#26031 = VERTEX_POINT('',#26032); +#26032 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#26033 = LINE('',#26034,#26035); +#26034 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#26035 = VECTOR('',#26036,1.); +#26036 = DIRECTION('',(0.,0.,-1.)); +#26037 = ORIENTED_EDGE('',*,*,#26038,.T.); +#26038 = EDGE_CURVE('',#26031,#26039,#26041,.T.); +#26039 = VERTEX_POINT('',#26040); +#26040 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#26041 = LINE('',#26042,#26043); +#26042 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#26043 = VECTOR('',#26044,1.); +#26044 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26045 = ORIENTED_EDGE('',*,*,#26046,.F.); +#26046 = EDGE_CURVE('',#26047,#26039,#26049,.T.); +#26047 = VERTEX_POINT('',#26048); +#26048 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#26049 = LINE('',#26050,#26051); +#26050 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#26051 = VECTOR('',#26052,1.); +#26052 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26053 = ORIENTED_EDGE('',*,*,#26054,.T.); +#26054 = EDGE_CURVE('',#26047,#26022,#26055,.T.); +#26055 = LINE('',#26056,#26057); +#26056 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#26057 = VECTOR('',#26058,1.); +#26058 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26059 = PLANE('',#26060); +#26060 = AXIS2_PLACEMENT_3D('',#26061,#26062,#26063); +#26061 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#26062 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26063 = DIRECTION('',(0.,0.,1.)); +#26064 = ADVANCED_FACE('',(#26065),#26076,.T.); +#26065 = FACE_BOUND('',#26066,.T.); +#26066 = EDGE_LOOP('',(#26067,#26068,#26069,#26075)); +#26067 = ORIENTED_EDGE('',*,*,#22054,.F.); +#26068 = ORIENTED_EDGE('',*,*,#22064,.T.); +#26069 = ORIENTED_EDGE('',*,*,#26070,.T.); +#26070 = EDGE_CURVE('',#22065,#22105,#26071,.T.); +#26071 = LINE('',#26072,#26073); +#26072 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#26073 = VECTOR('',#26074,1.); +#26074 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26075 = ORIENTED_EDGE('',*,*,#22112,.T.); +#26076 = PLANE('',#26077); +#26077 = AXIS2_PLACEMENT_3D('',#26078,#26079,#26080); +#26078 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#26079 = DIRECTION('',(0.,-0.,-1.)); +#26080 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26081 = ADVANCED_FACE('',(#26082),#26123,.F.); +#26082 = FACE_BOUND('',#26083,.F.); +#26083 = EDGE_LOOP('',(#26084,#26092,#26093,#26101,#26109,#26117)); +#26084 = ORIENTED_EDGE('',*,*,#26085,.T.); +#26085 = EDGE_CURVE('',#26086,#22105,#26088,.T.); +#26086 = VERTEX_POINT('',#26087); +#26087 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#26088 = LINE('',#26089,#26090); +#26089 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#26090 = VECTOR('',#26091,1.); +#26091 = DIRECTION('',(0.,0.,1.)); +#26092 = ORIENTED_EDGE('',*,*,#22104,.F.); +#26093 = ORIENTED_EDGE('',*,*,#26094,.T.); +#26094 = EDGE_CURVE('',#22097,#26095,#26097,.T.); +#26095 = VERTEX_POINT('',#26096); +#26096 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#26097 = LINE('',#26098,#26099); +#26098 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#26099 = VECTOR('',#26100,1.); +#26100 = DIRECTION('',(0.,0.,-1.)); +#26101 = ORIENTED_EDGE('',*,*,#26102,.T.); +#26102 = EDGE_CURVE('',#26095,#26103,#26105,.T.); +#26103 = VERTEX_POINT('',#26104); +#26104 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#26105 = LINE('',#26106,#26107); +#26106 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#26107 = VECTOR('',#26108,1.); +#26108 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26109 = ORIENTED_EDGE('',*,*,#26110,.T.); +#26110 = EDGE_CURVE('',#26103,#26111,#26113,.T.); +#26111 = VERTEX_POINT('',#26112); +#26112 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#26113 = LINE('',#26114,#26115); +#26114 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#26115 = VECTOR('',#26116,1.); +#26116 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26117 = ORIENTED_EDGE('',*,*,#26118,.T.); +#26118 = EDGE_CURVE('',#26111,#26086,#26119,.T.); +#26119 = LINE('',#26120,#26121); +#26120 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#26121 = VECTOR('',#26122,1.); +#26122 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26123 = PLANE('',#26124); +#26124 = AXIS2_PLACEMENT_3D('',#26125,#26126,#26127); +#26125 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#26126 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26127 = DIRECTION('',(0.,0.,1.)); +#26128 = ADVANCED_FACE('',(#26129),#26140,.T.); +#26129 = FACE_BOUND('',#26130,.T.); +#26130 = EDGE_LOOP('',(#26131,#26137,#26138,#26139)); +#26131 = ORIENTED_EDGE('',*,*,#26132,.F.); +#26132 = EDGE_CURVE('',#22073,#22097,#26133,.T.); +#26133 = LINE('',#26134,#26135); +#26134 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#26135 = VECTOR('',#26136,1.); +#26136 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26137 = ORIENTED_EDGE('',*,*,#22080,.T.); +#26138 = ORIENTED_EDGE('',*,*,#22088,.T.); +#26139 = ORIENTED_EDGE('',*,*,#22096,.T.); +#26140 = PLANE('',#26141); +#26141 = AXIS2_PLACEMENT_3D('',#26142,#26143,#26144); +#26142 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#26143 = DIRECTION('',(0.,-0.,-1.)); +#26144 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26145 = ADVANCED_FACE('',(#26146),#26187,.T.); +#26146 = FACE_BOUND('',#26147,.T.); +#26147 = EDGE_LOOP('',(#26148,#26156,#26157,#26165,#26173,#26181)); +#26148 = ORIENTED_EDGE('',*,*,#26149,.T.); +#26149 = EDGE_CURVE('',#26150,#22065,#26152,.T.); +#26150 = VERTEX_POINT('',#26151); +#26151 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#26152 = LINE('',#26153,#26154); +#26153 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#26154 = VECTOR('',#26155,1.); +#26155 = DIRECTION('',(0.,0.,1.)); +#26156 = ORIENTED_EDGE('',*,*,#22072,.F.); +#26157 = ORIENTED_EDGE('',*,*,#26158,.T.); +#26158 = EDGE_CURVE('',#22073,#26159,#26161,.T.); +#26159 = VERTEX_POINT('',#26160); +#26160 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#26161 = LINE('',#26162,#26163); +#26162 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#26163 = VECTOR('',#26164,1.); +#26164 = DIRECTION('',(0.,0.,-1.)); +#26165 = ORIENTED_EDGE('',*,*,#26166,.T.); +#26166 = EDGE_CURVE('',#26159,#26167,#26169,.T.); +#26167 = VERTEX_POINT('',#26168); +#26168 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#26169 = LINE('',#26170,#26171); +#26170 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#26171 = VECTOR('',#26172,1.); +#26172 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26173 = ORIENTED_EDGE('',*,*,#26174,.F.); +#26174 = EDGE_CURVE('',#26175,#26167,#26177,.T.); +#26175 = VERTEX_POINT('',#26176); +#26176 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#26177 = LINE('',#26178,#26179); +#26178 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#26179 = VECTOR('',#26180,1.); +#26180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26181 = ORIENTED_EDGE('',*,*,#26182,.T.); +#26182 = EDGE_CURVE('',#26175,#26150,#26183,.T.); +#26183 = LINE('',#26184,#26185); +#26184 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#26185 = VECTOR('',#26186,1.); +#26186 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26187 = PLANE('',#26188); +#26188 = AXIS2_PLACEMENT_3D('',#26189,#26190,#26191); +#26189 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#26190 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26191 = DIRECTION('',(0.,0.,1.)); +#26192 = ADVANCED_FACE('',(#26193),#26204,.T.); +#26193 = FACE_BOUND('',#26194,.T.); +#26194 = EDGE_LOOP('',(#26195,#26196,#26197,#26203)); +#26195 = ORIENTED_EDGE('',*,*,#22120,.F.); +#26196 = ORIENTED_EDGE('',*,*,#22130,.T.); +#26197 = ORIENTED_EDGE('',*,*,#26198,.T.); +#26198 = EDGE_CURVE('',#22131,#22171,#26199,.T.); +#26199 = LINE('',#26200,#26201); +#26200 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#26201 = VECTOR('',#26202,1.); +#26202 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26203 = ORIENTED_EDGE('',*,*,#22178,.T.); +#26204 = PLANE('',#26205); +#26205 = AXIS2_PLACEMENT_3D('',#26206,#26207,#26208); +#26206 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#26207 = DIRECTION('',(0.,-0.,-1.)); +#26208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26209 = ADVANCED_FACE('',(#26210),#26251,.F.); +#26210 = FACE_BOUND('',#26211,.F.); +#26211 = EDGE_LOOP('',(#26212,#26220,#26221,#26229,#26237,#26245)); +#26212 = ORIENTED_EDGE('',*,*,#26213,.T.); +#26213 = EDGE_CURVE('',#26214,#22171,#26216,.T.); +#26214 = VERTEX_POINT('',#26215); +#26215 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#26216 = LINE('',#26217,#26218); +#26217 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#26218 = VECTOR('',#26219,1.); +#26219 = DIRECTION('',(0.,0.,1.)); +#26220 = ORIENTED_EDGE('',*,*,#22170,.F.); +#26221 = ORIENTED_EDGE('',*,*,#26222,.T.); +#26222 = EDGE_CURVE('',#22163,#26223,#26225,.T.); +#26223 = VERTEX_POINT('',#26224); +#26224 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#26225 = LINE('',#26226,#26227); +#26226 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#26227 = VECTOR('',#26228,1.); +#26228 = DIRECTION('',(0.,0.,-1.)); +#26229 = ORIENTED_EDGE('',*,*,#26230,.T.); +#26230 = EDGE_CURVE('',#26223,#26231,#26233,.T.); +#26231 = VERTEX_POINT('',#26232); +#26232 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#26233 = LINE('',#26234,#26235); +#26234 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#26235 = VECTOR('',#26236,1.); +#26236 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26237 = ORIENTED_EDGE('',*,*,#26238,.T.); +#26238 = EDGE_CURVE('',#26231,#26239,#26241,.T.); +#26239 = VERTEX_POINT('',#26240); +#26240 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#26241 = LINE('',#26242,#26243); +#26242 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#26243 = VECTOR('',#26244,1.); +#26244 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26245 = ORIENTED_EDGE('',*,*,#26246,.T.); +#26246 = EDGE_CURVE('',#26239,#26214,#26247,.T.); +#26247 = LINE('',#26248,#26249); +#26248 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#26249 = VECTOR('',#26250,1.); +#26250 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26251 = PLANE('',#26252); +#26252 = AXIS2_PLACEMENT_3D('',#26253,#26254,#26255); +#26253 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#26254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26255 = DIRECTION('',(0.,0.,1.)); +#26256 = ADVANCED_FACE('',(#26257),#26268,.T.); +#26257 = FACE_BOUND('',#26258,.T.); +#26258 = EDGE_LOOP('',(#26259,#26265,#26266,#26267)); +#26259 = ORIENTED_EDGE('',*,*,#26260,.F.); +#26260 = EDGE_CURVE('',#22139,#22163,#26261,.T.); +#26261 = LINE('',#26262,#26263); +#26262 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#26263 = VECTOR('',#26264,1.); +#26264 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26265 = ORIENTED_EDGE('',*,*,#22146,.T.); +#26266 = ORIENTED_EDGE('',*,*,#22154,.T.); +#26267 = ORIENTED_EDGE('',*,*,#22162,.T.); +#26268 = PLANE('',#26269); +#26269 = AXIS2_PLACEMENT_3D('',#26270,#26271,#26272); +#26270 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#26271 = DIRECTION('',(0.,-0.,-1.)); +#26272 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26273 = ADVANCED_FACE('',(#26274),#26315,.T.); +#26274 = FACE_BOUND('',#26275,.T.); +#26275 = EDGE_LOOP('',(#26276,#26284,#26285,#26293,#26301,#26309)); +#26276 = ORIENTED_EDGE('',*,*,#26277,.T.); +#26277 = EDGE_CURVE('',#26278,#22131,#26280,.T.); +#26278 = VERTEX_POINT('',#26279); +#26279 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#26280 = LINE('',#26281,#26282); +#26281 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#26282 = VECTOR('',#26283,1.); +#26283 = DIRECTION('',(0.,0.,1.)); +#26284 = ORIENTED_EDGE('',*,*,#22138,.F.); +#26285 = ORIENTED_EDGE('',*,*,#26286,.T.); +#26286 = EDGE_CURVE('',#22139,#26287,#26289,.T.); +#26287 = VERTEX_POINT('',#26288); +#26288 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#26289 = LINE('',#26290,#26291); +#26290 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#26291 = VECTOR('',#26292,1.); +#26292 = DIRECTION('',(0.,0.,-1.)); +#26293 = ORIENTED_EDGE('',*,*,#26294,.T.); +#26294 = EDGE_CURVE('',#26287,#26295,#26297,.T.); +#26295 = VERTEX_POINT('',#26296); +#26296 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#26297 = LINE('',#26298,#26299); +#26298 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#26299 = VECTOR('',#26300,1.); +#26300 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26301 = ORIENTED_EDGE('',*,*,#26302,.F.); +#26302 = EDGE_CURVE('',#26303,#26295,#26305,.T.); +#26303 = VERTEX_POINT('',#26304); +#26304 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#26305 = LINE('',#26306,#26307); +#26306 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#26307 = VECTOR('',#26308,1.); +#26308 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26309 = ORIENTED_EDGE('',*,*,#26310,.T.); +#26310 = EDGE_CURVE('',#26303,#26278,#26311,.T.); +#26311 = LINE('',#26312,#26313); +#26312 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#26313 = VECTOR('',#26314,1.); +#26314 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26315 = PLANE('',#26316); +#26316 = AXIS2_PLACEMENT_3D('',#26317,#26318,#26319); +#26317 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#26318 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26319 = DIRECTION('',(0.,0.,1.)); +#26320 = ADVANCED_FACE('',(#26321),#26332,.T.); +#26321 = FACE_BOUND('',#26322,.T.); +#26322 = EDGE_LOOP('',(#26323,#26324,#26325,#26331)); +#26323 = ORIENTED_EDGE('',*,*,#22186,.F.); +#26324 = ORIENTED_EDGE('',*,*,#22196,.T.); +#26325 = ORIENTED_EDGE('',*,*,#26326,.T.); +#26326 = EDGE_CURVE('',#22197,#22237,#26327,.T.); +#26327 = LINE('',#26328,#26329); +#26328 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#26329 = VECTOR('',#26330,1.); +#26330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26331 = ORIENTED_EDGE('',*,*,#22244,.T.); +#26332 = PLANE('',#26333); +#26333 = AXIS2_PLACEMENT_3D('',#26334,#26335,#26336); +#26334 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#26335 = DIRECTION('',(0.,-0.,-1.)); +#26336 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26337 = ADVANCED_FACE('',(#26338),#26379,.F.); +#26338 = FACE_BOUND('',#26339,.F.); +#26339 = EDGE_LOOP('',(#26340,#26348,#26349,#26357,#26365,#26373)); +#26340 = ORIENTED_EDGE('',*,*,#26341,.T.); +#26341 = EDGE_CURVE('',#26342,#22237,#26344,.T.); +#26342 = VERTEX_POINT('',#26343); +#26343 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#26344 = LINE('',#26345,#26346); +#26345 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#26346 = VECTOR('',#26347,1.); +#26347 = DIRECTION('',(0.,0.,1.)); +#26348 = ORIENTED_EDGE('',*,*,#22236,.F.); +#26349 = ORIENTED_EDGE('',*,*,#26350,.T.); +#26350 = EDGE_CURVE('',#22229,#26351,#26353,.T.); +#26351 = VERTEX_POINT('',#26352); +#26352 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#26353 = LINE('',#26354,#26355); +#26354 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#26355 = VECTOR('',#26356,1.); +#26356 = DIRECTION('',(0.,0.,-1.)); +#26357 = ORIENTED_EDGE('',*,*,#26358,.T.); +#26358 = EDGE_CURVE('',#26351,#26359,#26361,.T.); +#26359 = VERTEX_POINT('',#26360); +#26360 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#26361 = LINE('',#26362,#26363); +#26362 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#26363 = VECTOR('',#26364,1.); +#26364 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26365 = ORIENTED_EDGE('',*,*,#26366,.T.); +#26366 = EDGE_CURVE('',#26359,#26367,#26369,.T.); +#26367 = VERTEX_POINT('',#26368); +#26368 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#26369 = LINE('',#26370,#26371); +#26370 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#26371 = VECTOR('',#26372,1.); +#26372 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26373 = ORIENTED_EDGE('',*,*,#26374,.T.); +#26374 = EDGE_CURVE('',#26367,#26342,#26375,.T.); +#26375 = LINE('',#26376,#26377); +#26376 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#26377 = VECTOR('',#26378,1.); +#26378 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26379 = PLANE('',#26380); +#26380 = AXIS2_PLACEMENT_3D('',#26381,#26382,#26383); +#26381 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#26382 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26383 = DIRECTION('',(0.,0.,1.)); +#26384 = ADVANCED_FACE('',(#26385),#26396,.T.); +#26385 = FACE_BOUND('',#26386,.T.); +#26386 = EDGE_LOOP('',(#26387,#26393,#26394,#26395)); +#26387 = ORIENTED_EDGE('',*,*,#26388,.F.); +#26388 = EDGE_CURVE('',#22205,#22229,#26389,.T.); +#26389 = LINE('',#26390,#26391); +#26390 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#26391 = VECTOR('',#26392,1.); +#26392 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26393 = ORIENTED_EDGE('',*,*,#22212,.T.); +#26394 = ORIENTED_EDGE('',*,*,#22220,.T.); +#26395 = ORIENTED_EDGE('',*,*,#22228,.T.); +#26396 = PLANE('',#26397); +#26397 = AXIS2_PLACEMENT_3D('',#26398,#26399,#26400); +#26398 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#26399 = DIRECTION('',(0.,-0.,-1.)); +#26400 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26401 = ADVANCED_FACE('',(#26402),#26443,.T.); +#26402 = FACE_BOUND('',#26403,.T.); +#26403 = EDGE_LOOP('',(#26404,#26412,#26413,#26421,#26429,#26437)); +#26404 = ORIENTED_EDGE('',*,*,#26405,.T.); +#26405 = EDGE_CURVE('',#26406,#22197,#26408,.T.); +#26406 = VERTEX_POINT('',#26407); +#26407 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#26408 = LINE('',#26409,#26410); +#26409 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#26410 = VECTOR('',#26411,1.); +#26411 = DIRECTION('',(0.,0.,1.)); +#26412 = ORIENTED_EDGE('',*,*,#22204,.F.); +#26413 = ORIENTED_EDGE('',*,*,#26414,.T.); +#26414 = EDGE_CURVE('',#22205,#26415,#26417,.T.); +#26415 = VERTEX_POINT('',#26416); +#26416 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#26417 = LINE('',#26418,#26419); +#26418 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#26419 = VECTOR('',#26420,1.); +#26420 = DIRECTION('',(0.,0.,-1.)); +#26421 = ORIENTED_EDGE('',*,*,#26422,.T.); +#26422 = EDGE_CURVE('',#26415,#26423,#26425,.T.); +#26423 = VERTEX_POINT('',#26424); +#26424 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#26425 = LINE('',#26426,#26427); +#26426 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#26427 = VECTOR('',#26428,1.); +#26428 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26429 = ORIENTED_EDGE('',*,*,#26430,.F.); +#26430 = EDGE_CURVE('',#26431,#26423,#26433,.T.); +#26431 = VERTEX_POINT('',#26432); +#26432 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#26433 = LINE('',#26434,#26435); +#26434 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#26435 = VECTOR('',#26436,1.); +#26436 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26437 = ORIENTED_EDGE('',*,*,#26438,.T.); +#26438 = EDGE_CURVE('',#26431,#26406,#26439,.T.); +#26439 = LINE('',#26440,#26441); +#26440 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#26441 = VECTOR('',#26442,1.); +#26442 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26443 = PLANE('',#26444); +#26444 = AXIS2_PLACEMENT_3D('',#26445,#26446,#26447); +#26445 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#26446 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26447 = DIRECTION('',(0.,0.,1.)); +#26448 = ADVANCED_FACE('',(#26449),#26460,.T.); +#26449 = FACE_BOUND('',#26450,.T.); +#26450 = EDGE_LOOP('',(#26451,#26452,#26453,#26459)); +#26451 = ORIENTED_EDGE('',*,*,#22252,.F.); +#26452 = ORIENTED_EDGE('',*,*,#22262,.T.); +#26453 = ORIENTED_EDGE('',*,*,#26454,.T.); +#26454 = EDGE_CURVE('',#22263,#22303,#26455,.T.); +#26455 = LINE('',#26456,#26457); +#26456 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#26457 = VECTOR('',#26458,1.); +#26458 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26459 = ORIENTED_EDGE('',*,*,#22310,.T.); +#26460 = PLANE('',#26461); +#26461 = AXIS2_PLACEMENT_3D('',#26462,#26463,#26464); +#26462 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#26463 = DIRECTION('',(0.,-0.,-1.)); +#26464 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26465 = ADVANCED_FACE('',(#26466),#26507,.F.); +#26466 = FACE_BOUND('',#26467,.F.); +#26467 = EDGE_LOOP('',(#26468,#26476,#26477,#26485,#26493,#26501)); +#26468 = ORIENTED_EDGE('',*,*,#26469,.T.); +#26469 = EDGE_CURVE('',#26470,#22303,#26472,.T.); +#26470 = VERTEX_POINT('',#26471); +#26471 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#26472 = LINE('',#26473,#26474); +#26473 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#26474 = VECTOR('',#26475,1.); +#26475 = DIRECTION('',(0.,0.,1.)); +#26476 = ORIENTED_EDGE('',*,*,#22302,.F.); +#26477 = ORIENTED_EDGE('',*,*,#26478,.T.); +#26478 = EDGE_CURVE('',#22295,#26479,#26481,.T.); +#26479 = VERTEX_POINT('',#26480); +#26480 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#26481 = LINE('',#26482,#26483); +#26482 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#26483 = VECTOR('',#26484,1.); +#26484 = DIRECTION('',(0.,0.,-1.)); +#26485 = ORIENTED_EDGE('',*,*,#26486,.T.); +#26486 = EDGE_CURVE('',#26479,#26487,#26489,.T.); +#26487 = VERTEX_POINT('',#26488); +#26488 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#26489 = LINE('',#26490,#26491); +#26490 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#26491 = VECTOR('',#26492,1.); +#26492 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26493 = ORIENTED_EDGE('',*,*,#26494,.T.); +#26494 = EDGE_CURVE('',#26487,#26495,#26497,.T.); +#26495 = VERTEX_POINT('',#26496); +#26496 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#26497 = LINE('',#26498,#26499); +#26498 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#26499 = VECTOR('',#26500,1.); +#26500 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26501 = ORIENTED_EDGE('',*,*,#26502,.T.); +#26502 = EDGE_CURVE('',#26495,#26470,#26503,.T.); +#26503 = LINE('',#26504,#26505); +#26504 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#26505 = VECTOR('',#26506,1.); +#26506 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26507 = PLANE('',#26508); +#26508 = AXIS2_PLACEMENT_3D('',#26509,#26510,#26511); +#26509 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#26510 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26511 = DIRECTION('',(0.,0.,1.)); +#26512 = ADVANCED_FACE('',(#26513),#26524,.T.); +#26513 = FACE_BOUND('',#26514,.T.); +#26514 = EDGE_LOOP('',(#26515,#26521,#26522,#26523)); +#26515 = ORIENTED_EDGE('',*,*,#26516,.F.); +#26516 = EDGE_CURVE('',#22271,#22295,#26517,.T.); +#26517 = LINE('',#26518,#26519); +#26518 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#26519 = VECTOR('',#26520,1.); +#26520 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26521 = ORIENTED_EDGE('',*,*,#22278,.T.); +#26522 = ORIENTED_EDGE('',*,*,#22286,.T.); +#26523 = ORIENTED_EDGE('',*,*,#22294,.T.); +#26524 = PLANE('',#26525); +#26525 = AXIS2_PLACEMENT_3D('',#26526,#26527,#26528); +#26526 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#26527 = DIRECTION('',(0.,-0.,-1.)); +#26528 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26529 = ADVANCED_FACE('',(#26530),#26571,.T.); +#26530 = FACE_BOUND('',#26531,.T.); +#26531 = EDGE_LOOP('',(#26532,#26540,#26541,#26549,#26557,#26565)); +#26532 = ORIENTED_EDGE('',*,*,#26533,.T.); +#26533 = EDGE_CURVE('',#26534,#22263,#26536,.T.); +#26534 = VERTEX_POINT('',#26535); +#26535 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#26536 = LINE('',#26537,#26538); +#26537 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#26538 = VECTOR('',#26539,1.); +#26539 = DIRECTION('',(0.,0.,1.)); +#26540 = ORIENTED_EDGE('',*,*,#22270,.F.); +#26541 = ORIENTED_EDGE('',*,*,#26542,.T.); +#26542 = EDGE_CURVE('',#22271,#26543,#26545,.T.); +#26543 = VERTEX_POINT('',#26544); +#26544 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#26545 = LINE('',#26546,#26547); +#26546 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#26547 = VECTOR('',#26548,1.); +#26548 = DIRECTION('',(0.,0.,-1.)); +#26549 = ORIENTED_EDGE('',*,*,#26550,.T.); +#26550 = EDGE_CURVE('',#26543,#26551,#26553,.T.); +#26551 = VERTEX_POINT('',#26552); +#26552 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#26553 = LINE('',#26554,#26555); +#26554 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#26555 = VECTOR('',#26556,1.); +#26556 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26557 = ORIENTED_EDGE('',*,*,#26558,.F.); +#26558 = EDGE_CURVE('',#26559,#26551,#26561,.T.); +#26559 = VERTEX_POINT('',#26560); +#26560 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#26561 = LINE('',#26562,#26563); +#26562 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#26563 = VECTOR('',#26564,1.); +#26564 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26565 = ORIENTED_EDGE('',*,*,#26566,.T.); +#26566 = EDGE_CURVE('',#26559,#26534,#26567,.T.); +#26567 = LINE('',#26568,#26569); +#26568 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#26569 = VECTOR('',#26570,1.); +#26570 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26571 = PLANE('',#26572); +#26572 = AXIS2_PLACEMENT_3D('',#26573,#26574,#26575); +#26573 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#26574 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26575 = DIRECTION('',(0.,0.,1.)); +#26576 = ADVANCED_FACE('',(#26577),#26588,.T.); +#26577 = FACE_BOUND('',#26578,.T.); +#26578 = EDGE_LOOP('',(#26579,#26580,#26581,#26587)); +#26579 = ORIENTED_EDGE('',*,*,#22318,.F.); +#26580 = ORIENTED_EDGE('',*,*,#22328,.T.); +#26581 = ORIENTED_EDGE('',*,*,#26582,.T.); +#26582 = EDGE_CURVE('',#22329,#22369,#26583,.T.); +#26583 = LINE('',#26584,#26585); +#26584 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#26585 = VECTOR('',#26586,1.); +#26586 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26587 = ORIENTED_EDGE('',*,*,#22376,.T.); +#26588 = PLANE('',#26589); +#26589 = AXIS2_PLACEMENT_3D('',#26590,#26591,#26592); +#26590 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#26591 = DIRECTION('',(0.,-0.,-1.)); +#26592 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26593 = ADVANCED_FACE('',(#26594),#26635,.F.); +#26594 = FACE_BOUND('',#26595,.F.); +#26595 = EDGE_LOOP('',(#26596,#26604,#26605,#26613,#26621,#26629)); +#26596 = ORIENTED_EDGE('',*,*,#26597,.T.); +#26597 = EDGE_CURVE('',#26598,#22369,#26600,.T.); +#26598 = VERTEX_POINT('',#26599); +#26599 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#26600 = LINE('',#26601,#26602); +#26601 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#26602 = VECTOR('',#26603,1.); +#26603 = DIRECTION('',(0.,0.,1.)); +#26604 = ORIENTED_EDGE('',*,*,#22368,.F.); +#26605 = ORIENTED_EDGE('',*,*,#26606,.T.); +#26606 = EDGE_CURVE('',#22361,#26607,#26609,.T.); +#26607 = VERTEX_POINT('',#26608); +#26608 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#26609 = LINE('',#26610,#26611); +#26610 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#26611 = VECTOR('',#26612,1.); +#26612 = DIRECTION('',(0.,0.,-1.)); +#26613 = ORIENTED_EDGE('',*,*,#26614,.T.); +#26614 = EDGE_CURVE('',#26607,#26615,#26617,.T.); +#26615 = VERTEX_POINT('',#26616); +#26616 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#26617 = LINE('',#26618,#26619); +#26618 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#26619 = VECTOR('',#26620,1.); +#26620 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26621 = ORIENTED_EDGE('',*,*,#26622,.T.); +#26622 = EDGE_CURVE('',#26615,#26623,#26625,.T.); +#26623 = VERTEX_POINT('',#26624); +#26624 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#26625 = LINE('',#26626,#26627); +#26626 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#26627 = VECTOR('',#26628,1.); +#26628 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26629 = ORIENTED_EDGE('',*,*,#26630,.T.); +#26630 = EDGE_CURVE('',#26623,#26598,#26631,.T.); +#26631 = LINE('',#26632,#26633); +#26632 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#26633 = VECTOR('',#26634,1.); +#26634 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26635 = PLANE('',#26636); +#26636 = AXIS2_PLACEMENT_3D('',#26637,#26638,#26639); +#26637 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#26638 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26639 = DIRECTION('',(0.,0.,1.)); +#26640 = ADVANCED_FACE('',(#26641),#26652,.T.); +#26641 = FACE_BOUND('',#26642,.T.); +#26642 = EDGE_LOOP('',(#26643,#26649,#26650,#26651)); +#26643 = ORIENTED_EDGE('',*,*,#26644,.F.); +#26644 = EDGE_CURVE('',#22337,#22361,#26645,.T.); +#26645 = LINE('',#26646,#26647); +#26646 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#26647 = VECTOR('',#26648,1.); +#26648 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26649 = ORIENTED_EDGE('',*,*,#22344,.T.); +#26650 = ORIENTED_EDGE('',*,*,#22352,.T.); +#26651 = ORIENTED_EDGE('',*,*,#22360,.T.); +#26652 = PLANE('',#26653); +#26653 = AXIS2_PLACEMENT_3D('',#26654,#26655,#26656); +#26654 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#26655 = DIRECTION('',(0.,-0.,-1.)); +#26656 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26657 = ADVANCED_FACE('',(#26658),#26699,.T.); +#26658 = FACE_BOUND('',#26659,.T.); +#26659 = EDGE_LOOP('',(#26660,#26668,#26669,#26677,#26685,#26693)); +#26660 = ORIENTED_EDGE('',*,*,#26661,.T.); +#26661 = EDGE_CURVE('',#26662,#22329,#26664,.T.); +#26662 = VERTEX_POINT('',#26663); +#26663 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#26664 = LINE('',#26665,#26666); +#26665 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#26666 = VECTOR('',#26667,1.); +#26667 = DIRECTION('',(0.,0.,1.)); +#26668 = ORIENTED_EDGE('',*,*,#22336,.F.); +#26669 = ORIENTED_EDGE('',*,*,#26670,.T.); +#26670 = EDGE_CURVE('',#22337,#26671,#26673,.T.); +#26671 = VERTEX_POINT('',#26672); +#26672 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#26673 = LINE('',#26674,#26675); +#26674 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#26675 = VECTOR('',#26676,1.); +#26676 = DIRECTION('',(0.,0.,-1.)); +#26677 = ORIENTED_EDGE('',*,*,#26678,.T.); +#26678 = EDGE_CURVE('',#26671,#26679,#26681,.T.); +#26679 = VERTEX_POINT('',#26680); +#26680 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#26681 = LINE('',#26682,#26683); +#26682 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#26683 = VECTOR('',#26684,1.); +#26684 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26685 = ORIENTED_EDGE('',*,*,#26686,.F.); +#26686 = EDGE_CURVE('',#26687,#26679,#26689,.T.); +#26687 = VERTEX_POINT('',#26688); +#26688 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#26689 = LINE('',#26690,#26691); +#26690 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#26691 = VECTOR('',#26692,1.); +#26692 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26693 = ORIENTED_EDGE('',*,*,#26694,.T.); +#26694 = EDGE_CURVE('',#26687,#26662,#26695,.T.); +#26695 = LINE('',#26696,#26697); +#26696 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#26697 = VECTOR('',#26698,1.); +#26698 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26699 = PLANE('',#26700); +#26700 = AXIS2_PLACEMENT_3D('',#26701,#26702,#26703); +#26701 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#26702 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26703 = DIRECTION('',(0.,0.,1.)); +#26704 = ADVANCED_FACE('',(#26705),#26716,.T.); +#26705 = FACE_BOUND('',#26706,.T.); +#26706 = EDGE_LOOP('',(#26707,#26708,#26709,#26715)); +#26707 = ORIENTED_EDGE('',*,*,#22384,.F.); +#26708 = ORIENTED_EDGE('',*,*,#22394,.T.); +#26709 = ORIENTED_EDGE('',*,*,#26710,.T.); +#26710 = EDGE_CURVE('',#22395,#22435,#26711,.T.); +#26711 = LINE('',#26712,#26713); +#26712 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#26713 = VECTOR('',#26714,1.); +#26714 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26715 = ORIENTED_EDGE('',*,*,#22442,.T.); +#26716 = PLANE('',#26717); +#26717 = AXIS2_PLACEMENT_3D('',#26718,#26719,#26720); +#26718 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#26719 = DIRECTION('',(0.,-0.,-1.)); +#26720 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26721 = ADVANCED_FACE('',(#26722),#26763,.F.); +#26722 = FACE_BOUND('',#26723,.F.); +#26723 = EDGE_LOOP('',(#26724,#26732,#26733,#26741,#26749,#26757)); +#26724 = ORIENTED_EDGE('',*,*,#26725,.T.); +#26725 = EDGE_CURVE('',#26726,#22435,#26728,.T.); +#26726 = VERTEX_POINT('',#26727); +#26727 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#26728 = LINE('',#26729,#26730); +#26729 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#26730 = VECTOR('',#26731,1.); +#26731 = DIRECTION('',(0.,0.,1.)); +#26732 = ORIENTED_EDGE('',*,*,#22434,.F.); +#26733 = ORIENTED_EDGE('',*,*,#26734,.T.); +#26734 = EDGE_CURVE('',#22427,#26735,#26737,.T.); +#26735 = VERTEX_POINT('',#26736); +#26736 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#26737 = LINE('',#26738,#26739); +#26738 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#26739 = VECTOR('',#26740,1.); +#26740 = DIRECTION('',(0.,0.,-1.)); +#26741 = ORIENTED_EDGE('',*,*,#26742,.T.); +#26742 = EDGE_CURVE('',#26735,#26743,#26745,.T.); +#26743 = VERTEX_POINT('',#26744); +#26744 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#26745 = LINE('',#26746,#26747); +#26746 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#26747 = VECTOR('',#26748,1.); +#26748 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26749 = ORIENTED_EDGE('',*,*,#26750,.T.); +#26750 = EDGE_CURVE('',#26743,#26751,#26753,.T.); +#26751 = VERTEX_POINT('',#26752); +#26752 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#26753 = LINE('',#26754,#26755); +#26754 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#26755 = VECTOR('',#26756,1.); +#26756 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26757 = ORIENTED_EDGE('',*,*,#26758,.T.); +#26758 = EDGE_CURVE('',#26751,#26726,#26759,.T.); +#26759 = LINE('',#26760,#26761); +#26760 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#26761 = VECTOR('',#26762,1.); +#26762 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26763 = PLANE('',#26764); +#26764 = AXIS2_PLACEMENT_3D('',#26765,#26766,#26767); +#26765 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#26766 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26767 = DIRECTION('',(0.,0.,1.)); +#26768 = ADVANCED_FACE('',(#26769),#26780,.T.); +#26769 = FACE_BOUND('',#26770,.T.); +#26770 = EDGE_LOOP('',(#26771,#26777,#26778,#26779)); +#26771 = ORIENTED_EDGE('',*,*,#26772,.F.); +#26772 = EDGE_CURVE('',#22403,#22427,#26773,.T.); +#26773 = LINE('',#26774,#26775); +#26774 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#26775 = VECTOR('',#26776,1.); +#26776 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26777 = ORIENTED_EDGE('',*,*,#22410,.T.); +#26778 = ORIENTED_EDGE('',*,*,#22418,.T.); +#26779 = ORIENTED_EDGE('',*,*,#22426,.T.); +#26780 = PLANE('',#26781); +#26781 = AXIS2_PLACEMENT_3D('',#26782,#26783,#26784); +#26782 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#26783 = DIRECTION('',(0.,-0.,-1.)); +#26784 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26785 = ADVANCED_FACE('',(#26786),#26827,.T.); +#26786 = FACE_BOUND('',#26787,.T.); +#26787 = EDGE_LOOP('',(#26788,#26796,#26797,#26805,#26813,#26821)); +#26788 = ORIENTED_EDGE('',*,*,#26789,.T.); +#26789 = EDGE_CURVE('',#26790,#22395,#26792,.T.); +#26790 = VERTEX_POINT('',#26791); +#26791 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#26792 = LINE('',#26793,#26794); +#26793 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#26794 = VECTOR('',#26795,1.); +#26795 = DIRECTION('',(0.,0.,1.)); +#26796 = ORIENTED_EDGE('',*,*,#22402,.F.); +#26797 = ORIENTED_EDGE('',*,*,#26798,.T.); +#26798 = EDGE_CURVE('',#22403,#26799,#26801,.T.); +#26799 = VERTEX_POINT('',#26800); +#26800 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#26801 = LINE('',#26802,#26803); +#26802 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#26803 = VECTOR('',#26804,1.); +#26804 = DIRECTION('',(0.,0.,-1.)); +#26805 = ORIENTED_EDGE('',*,*,#26806,.T.); +#26806 = EDGE_CURVE('',#26799,#26807,#26809,.T.); +#26807 = VERTEX_POINT('',#26808); +#26808 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#26809 = LINE('',#26810,#26811); +#26810 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#26811 = VECTOR('',#26812,1.); +#26812 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26813 = ORIENTED_EDGE('',*,*,#26814,.F.); +#26814 = EDGE_CURVE('',#26815,#26807,#26817,.T.); +#26815 = VERTEX_POINT('',#26816); +#26816 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#26817 = LINE('',#26818,#26819); +#26818 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#26819 = VECTOR('',#26820,1.); +#26820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26821 = ORIENTED_EDGE('',*,*,#26822,.T.); +#26822 = EDGE_CURVE('',#26815,#26790,#26823,.T.); +#26823 = LINE('',#26824,#26825); +#26824 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#26825 = VECTOR('',#26826,1.); +#26826 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26827 = PLANE('',#26828); +#26828 = AXIS2_PLACEMENT_3D('',#26829,#26830,#26831); +#26829 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#26830 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26831 = DIRECTION('',(0.,0.,1.)); +#26832 = ADVANCED_FACE('',(#26833),#26844,.T.); +#26833 = FACE_BOUND('',#26834,.T.); +#26834 = EDGE_LOOP('',(#26835,#26836,#26837,#26843)); +#26835 = ORIENTED_EDGE('',*,*,#22450,.F.); +#26836 = ORIENTED_EDGE('',*,*,#22460,.T.); +#26837 = ORIENTED_EDGE('',*,*,#26838,.T.); +#26838 = EDGE_CURVE('',#22461,#22501,#26839,.T.); +#26839 = LINE('',#26840,#26841); +#26840 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#26841 = VECTOR('',#26842,1.); +#26842 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26843 = ORIENTED_EDGE('',*,*,#22508,.T.); +#26844 = PLANE('',#26845); +#26845 = AXIS2_PLACEMENT_3D('',#26846,#26847,#26848); +#26846 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#26847 = DIRECTION('',(0.,-0.,-1.)); +#26848 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26849 = ADVANCED_FACE('',(#26850),#26891,.F.); +#26850 = FACE_BOUND('',#26851,.F.); +#26851 = EDGE_LOOP('',(#26852,#26860,#26861,#26869,#26877,#26885)); +#26852 = ORIENTED_EDGE('',*,*,#26853,.T.); +#26853 = EDGE_CURVE('',#26854,#22501,#26856,.T.); +#26854 = VERTEX_POINT('',#26855); +#26855 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#26856 = LINE('',#26857,#26858); +#26857 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#26858 = VECTOR('',#26859,1.); +#26859 = DIRECTION('',(0.,0.,1.)); +#26860 = ORIENTED_EDGE('',*,*,#22500,.F.); +#26861 = ORIENTED_EDGE('',*,*,#26862,.T.); +#26862 = EDGE_CURVE('',#22493,#26863,#26865,.T.); +#26863 = VERTEX_POINT('',#26864); +#26864 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#26865 = LINE('',#26866,#26867); +#26866 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#26867 = VECTOR('',#26868,1.); +#26868 = DIRECTION('',(0.,0.,-1.)); +#26869 = ORIENTED_EDGE('',*,*,#26870,.T.); +#26870 = EDGE_CURVE('',#26863,#26871,#26873,.T.); +#26871 = VERTEX_POINT('',#26872); +#26872 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#26873 = LINE('',#26874,#26875); +#26874 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#26875 = VECTOR('',#26876,1.); +#26876 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26877 = ORIENTED_EDGE('',*,*,#26878,.T.); +#26878 = EDGE_CURVE('',#26871,#26879,#26881,.T.); +#26879 = VERTEX_POINT('',#26880); +#26880 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#26881 = LINE('',#26882,#26883); +#26882 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#26883 = VECTOR('',#26884,1.); +#26884 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26885 = ORIENTED_EDGE('',*,*,#26886,.T.); +#26886 = EDGE_CURVE('',#26879,#26854,#26887,.T.); +#26887 = LINE('',#26888,#26889); +#26888 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#26889 = VECTOR('',#26890,1.); +#26890 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26891 = PLANE('',#26892); +#26892 = AXIS2_PLACEMENT_3D('',#26893,#26894,#26895); +#26893 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#26894 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26895 = DIRECTION('',(0.,0.,1.)); +#26896 = ADVANCED_FACE('',(#26897),#26908,.T.); +#26897 = FACE_BOUND('',#26898,.T.); +#26898 = EDGE_LOOP('',(#26899,#26905,#26906,#26907)); +#26899 = ORIENTED_EDGE('',*,*,#26900,.F.); +#26900 = EDGE_CURVE('',#22469,#22493,#26901,.T.); +#26901 = LINE('',#26902,#26903); +#26902 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#26903 = VECTOR('',#26904,1.); +#26904 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26905 = ORIENTED_EDGE('',*,*,#22476,.T.); +#26906 = ORIENTED_EDGE('',*,*,#22484,.T.); +#26907 = ORIENTED_EDGE('',*,*,#22492,.T.); +#26908 = PLANE('',#26909); +#26909 = AXIS2_PLACEMENT_3D('',#26910,#26911,#26912); +#26910 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#26911 = DIRECTION('',(0.,-0.,-1.)); +#26912 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26913 = ADVANCED_FACE('',(#26914),#26955,.T.); +#26914 = FACE_BOUND('',#26915,.T.); +#26915 = EDGE_LOOP('',(#26916,#26924,#26925,#26933,#26941,#26949)); +#26916 = ORIENTED_EDGE('',*,*,#26917,.T.); +#26917 = EDGE_CURVE('',#26918,#22461,#26920,.T.); +#26918 = VERTEX_POINT('',#26919); +#26919 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#26920 = LINE('',#26921,#26922); +#26921 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#26922 = VECTOR('',#26923,1.); +#26923 = DIRECTION('',(0.,0.,1.)); +#26924 = ORIENTED_EDGE('',*,*,#22468,.F.); +#26925 = ORIENTED_EDGE('',*,*,#26926,.T.); +#26926 = EDGE_CURVE('',#22469,#26927,#26929,.T.); +#26927 = VERTEX_POINT('',#26928); +#26928 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#26929 = LINE('',#26930,#26931); +#26930 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#26931 = VECTOR('',#26932,1.); +#26932 = DIRECTION('',(0.,0.,-1.)); +#26933 = ORIENTED_EDGE('',*,*,#26934,.T.); +#26934 = EDGE_CURVE('',#26927,#26935,#26937,.T.); +#26935 = VERTEX_POINT('',#26936); +#26936 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#26937 = LINE('',#26938,#26939); +#26938 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#26939 = VECTOR('',#26940,1.); +#26940 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#26941 = ORIENTED_EDGE('',*,*,#26942,.F.); +#26942 = EDGE_CURVE('',#26943,#26935,#26945,.T.); +#26943 = VERTEX_POINT('',#26944); +#26944 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#26945 = LINE('',#26946,#26947); +#26946 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#26947 = VECTOR('',#26948,1.); +#26948 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26949 = ORIENTED_EDGE('',*,*,#26950,.T.); +#26950 = EDGE_CURVE('',#26943,#26918,#26951,.T.); +#26951 = LINE('',#26952,#26953); +#26952 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#26953 = VECTOR('',#26954,1.); +#26954 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#26955 = PLANE('',#26956); +#26956 = AXIS2_PLACEMENT_3D('',#26957,#26958,#26959); +#26957 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#26958 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26959 = DIRECTION('',(0.,0.,1.)); +#26960 = ADVANCED_FACE('',(#26961),#26972,.T.); +#26961 = FACE_BOUND('',#26962,.T.); +#26962 = EDGE_LOOP('',(#26963,#26964,#26965,#26971)); +#26963 = ORIENTED_EDGE('',*,*,#22516,.F.); +#26964 = ORIENTED_EDGE('',*,*,#22526,.T.); +#26965 = ORIENTED_EDGE('',*,*,#26966,.T.); +#26966 = EDGE_CURVE('',#22527,#22567,#26967,.T.); +#26967 = LINE('',#26968,#26969); +#26968 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#26969 = VECTOR('',#26970,1.); +#26970 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26971 = ORIENTED_EDGE('',*,*,#22574,.T.); +#26972 = PLANE('',#26973); +#26973 = AXIS2_PLACEMENT_3D('',#26974,#26975,#26976); +#26974 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#26975 = DIRECTION('',(0.,-0.,-1.)); +#26976 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26977 = ADVANCED_FACE('',(#26978),#27019,.F.); +#26978 = FACE_BOUND('',#26979,.F.); +#26979 = EDGE_LOOP('',(#26980,#26988,#26989,#26997,#27005,#27013)); +#26980 = ORIENTED_EDGE('',*,*,#26981,.T.); +#26981 = EDGE_CURVE('',#26982,#22567,#26984,.T.); +#26982 = VERTEX_POINT('',#26983); +#26983 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#26984 = LINE('',#26985,#26986); +#26985 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#26986 = VECTOR('',#26987,1.); +#26987 = DIRECTION('',(0.,0.,1.)); +#26988 = ORIENTED_EDGE('',*,*,#22566,.F.); +#26989 = ORIENTED_EDGE('',*,*,#26990,.T.); +#26990 = EDGE_CURVE('',#22559,#26991,#26993,.T.); +#26991 = VERTEX_POINT('',#26992); +#26992 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#26993 = LINE('',#26994,#26995); +#26994 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#26995 = VECTOR('',#26996,1.); +#26996 = DIRECTION('',(0.,0.,-1.)); +#26997 = ORIENTED_EDGE('',*,*,#26998,.T.); +#26998 = EDGE_CURVE('',#26991,#26999,#27001,.T.); +#26999 = VERTEX_POINT('',#27000); +#27000 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#27001 = LINE('',#27002,#27003); +#27002 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#27003 = VECTOR('',#27004,1.); +#27004 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#27005 = ORIENTED_EDGE('',*,*,#27006,.T.); +#27006 = EDGE_CURVE('',#26999,#27007,#27009,.T.); +#27007 = VERTEX_POINT('',#27008); +#27008 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#27009 = LINE('',#27010,#27011); +#27010 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#27011 = VECTOR('',#27012,1.); +#27012 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27013 = ORIENTED_EDGE('',*,*,#27014,.T.); +#27014 = EDGE_CURVE('',#27007,#26982,#27015,.T.); +#27015 = LINE('',#27016,#27017); +#27016 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#27017 = VECTOR('',#27018,1.); +#27018 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#27019 = PLANE('',#27020); +#27020 = AXIS2_PLACEMENT_3D('',#27021,#27022,#27023); +#27021 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#27022 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27023 = DIRECTION('',(0.,0.,1.)); +#27024 = ADVANCED_FACE('',(#27025),#27036,.T.); +#27025 = FACE_BOUND('',#27026,.T.); +#27026 = EDGE_LOOP('',(#27027,#27033,#27034,#27035)); +#27027 = ORIENTED_EDGE('',*,*,#27028,.F.); +#27028 = EDGE_CURVE('',#22535,#22559,#27029,.T.); +#27029 = LINE('',#27030,#27031); +#27030 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#27031 = VECTOR('',#27032,1.); +#27032 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27033 = ORIENTED_EDGE('',*,*,#22542,.T.); +#27034 = ORIENTED_EDGE('',*,*,#22550,.T.); +#27035 = ORIENTED_EDGE('',*,*,#22558,.T.); +#27036 = PLANE('',#27037); +#27037 = AXIS2_PLACEMENT_3D('',#27038,#27039,#27040); +#27038 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#27039 = DIRECTION('',(0.,-0.,-1.)); +#27040 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27041 = ADVANCED_FACE('',(#27042),#27083,.T.); +#27042 = FACE_BOUND('',#27043,.T.); +#27043 = EDGE_LOOP('',(#27044,#27052,#27053,#27061,#27069,#27077)); +#27044 = ORIENTED_EDGE('',*,*,#27045,.T.); +#27045 = EDGE_CURVE('',#27046,#22527,#27048,.T.); +#27046 = VERTEX_POINT('',#27047); +#27047 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#27048 = LINE('',#27049,#27050); +#27049 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#27050 = VECTOR('',#27051,1.); +#27051 = DIRECTION('',(0.,0.,1.)); +#27052 = ORIENTED_EDGE('',*,*,#22534,.F.); +#27053 = ORIENTED_EDGE('',*,*,#27054,.T.); +#27054 = EDGE_CURVE('',#22535,#27055,#27057,.T.); +#27055 = VERTEX_POINT('',#27056); +#27056 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#27057 = LINE('',#27058,#27059); +#27058 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#27059 = VECTOR('',#27060,1.); +#27060 = DIRECTION('',(0.,0.,-1.)); +#27061 = ORIENTED_EDGE('',*,*,#27062,.T.); +#27062 = EDGE_CURVE('',#27055,#27063,#27065,.T.); +#27063 = VERTEX_POINT('',#27064); +#27064 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#27065 = LINE('',#27066,#27067); +#27066 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#27067 = VECTOR('',#27068,1.); +#27068 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#27069 = ORIENTED_EDGE('',*,*,#27070,.F.); +#27070 = EDGE_CURVE('',#27071,#27063,#27073,.T.); +#27071 = VERTEX_POINT('',#27072); +#27072 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#27073 = LINE('',#27074,#27075); +#27074 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#27075 = VECTOR('',#27076,1.); +#27076 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27077 = ORIENTED_EDGE('',*,*,#27078,.T.); +#27078 = EDGE_CURVE('',#27071,#27046,#27079,.T.); +#27079 = LINE('',#27080,#27081); +#27080 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#27081 = VECTOR('',#27082,1.); +#27082 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#27083 = PLANE('',#27084); +#27084 = AXIS2_PLACEMENT_3D('',#27085,#27086,#27087); +#27085 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#27086 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27087 = DIRECTION('',(0.,0.,1.)); +#27088 = ADVANCED_FACE('',(#27089),#27114,.F.); +#27089 = FACE_BOUND('',#27090,.F.); +#27090 = EDGE_LOOP('',(#27091,#27099,#27107,#27113)); +#27091 = ORIENTED_EDGE('',*,*,#27092,.T.); +#27092 = EDGE_CURVE('',#22613,#27093,#27095,.T.); +#27093 = VERTEX_POINT('',#27094); +#27094 = CARTESIAN_POINT('',(0.3,-48.56,0.9)); +#27095 = LINE('',#27096,#27097); +#27096 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#27097 = VECTOR('',#27098,1.); +#27098 = DIRECTION('',(0.,-0.,-1.)); +#27099 = ORIENTED_EDGE('',*,*,#27100,.T.); +#27100 = EDGE_CURVE('',#27093,#27101,#27103,.T.); +#27101 = VERTEX_POINT('',#27102); +#27102 = CARTESIAN_POINT('',(0.3,-47.96,0.9)); +#27103 = LINE('',#27104,#27105); +#27104 = CARTESIAN_POINT('',(0.3,-48.56,0.9)); +#27105 = VECTOR('',#27106,1.); +#27106 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27107 = ORIENTED_EDGE('',*,*,#27108,.F.); +#27108 = EDGE_CURVE('',#22622,#27101,#27109,.T.); +#27109 = LINE('',#27110,#27111); +#27110 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#27111 = VECTOR('',#27112,1.); +#27112 = DIRECTION('',(0.,-0.,-1.)); +#27113 = ORIENTED_EDGE('',*,*,#22629,.F.); +#27114 = PLANE('',#27115); +#27115 = AXIS2_PLACEMENT_3D('',#27116,#27117,#27118); +#27116 = CARTESIAN_POINT('',(0.3,-48.56,8.2)); +#27117 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27118 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27119 = ADVANCED_FACE('',(#27120),#27170,.F.); +#27120 = FACE_BOUND('',#27121,.F.); +#27121 = EDGE_LOOP('',(#27122,#27123,#27124,#27132,#27140,#27148,#27156, + #27164)); +#27122 = ORIENTED_EDGE('',*,*,#22653,.F.); +#27123 = ORIENTED_EDGE('',*,*,#27108,.T.); +#27124 = ORIENTED_EDGE('',*,*,#27125,.T.); +#27125 = EDGE_CURVE('',#27101,#27126,#27128,.T.); +#27126 = VERTEX_POINT('',#27127); +#27127 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,0.9)); +#27128 = LINE('',#27129,#27130); +#27129 = CARTESIAN_POINT('',(0.3,-47.96,0.9)); +#27130 = VECTOR('',#27131,1.); +#27131 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27132 = ORIENTED_EDGE('',*,*,#27133,.T.); +#27133 = EDGE_CURVE('',#27126,#27134,#27136,.T.); +#27134 = VERTEX_POINT('',#27135); +#27135 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,7.4)); +#27136 = LINE('',#27137,#27138); +#27137 = CARTESIAN_POINT('',(9.999999999999E-02,-47.96,6.055738799212)); +#27138 = VECTOR('',#27139,1.); +#27139 = DIRECTION('',(0.,-0.,1.)); +#27140 = ORIENTED_EDGE('',*,*,#27141,.F.); +#27141 = EDGE_CURVE('',#27142,#27134,#27144,.T.); +#27142 = VERTEX_POINT('',#27143); +#27143 = CARTESIAN_POINT('',(-0.1,-47.96,7.4)); +#27144 = LINE('',#27145,#27146); +#27145 = CARTESIAN_POINT('',(-0.1,-47.96,7.4)); +#27146 = VECTOR('',#27147,1.); +#27147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27148 = ORIENTED_EDGE('',*,*,#27149,.F.); +#27149 = EDGE_CURVE('',#27150,#27142,#27152,.T.); +#27150 = VERTEX_POINT('',#27151); +#27151 = CARTESIAN_POINT('',(-0.1,-47.96,0.9)); +#27152 = LINE('',#27153,#27154); +#27153 = CARTESIAN_POINT('',(-0.1,-47.96,6.055738799212)); +#27154 = VECTOR('',#27155,1.); +#27155 = DIRECTION('',(0.,-0.,1.)); +#27156 = ORIENTED_EDGE('',*,*,#27157,.T.); +#27157 = EDGE_CURVE('',#27150,#27158,#27160,.T.); +#27158 = VERTEX_POINT('',#27159); +#27159 = CARTESIAN_POINT('',(-0.3,-47.96,0.9)); +#27160 = LINE('',#27161,#27162); +#27161 = CARTESIAN_POINT('',(0.3,-47.96,0.9)); +#27162 = VECTOR('',#27163,1.); +#27163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27164 = ORIENTED_EDGE('',*,*,#27165,.F.); +#27165 = EDGE_CURVE('',#22646,#27158,#27166,.T.); +#27166 = LINE('',#27167,#27168); +#27167 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#27168 = VECTOR('',#27169,1.); +#27169 = DIRECTION('',(0.,-0.,-1.)); +#27170 = PLANE('',#27171); +#27171 = AXIS2_PLACEMENT_3D('',#27172,#27173,#27174); +#27172 = CARTESIAN_POINT('',(0.3,-47.96,8.2)); +#27173 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27174 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27175 = ADVANCED_FACE('',(#27176),#27194,.F.); +#27176 = FACE_BOUND('',#27177,.F.); +#27177 = EDGE_LOOP('',(#27178,#27179,#27187,#27193)); +#27178 = ORIENTED_EDGE('',*,*,#27165,.T.); +#27179 = ORIENTED_EDGE('',*,*,#27180,.T.); +#27180 = EDGE_CURVE('',#27158,#27181,#27183,.T.); +#27181 = VERTEX_POINT('',#27182); +#27182 = CARTESIAN_POINT('',(-0.3,-48.56,0.9)); +#27183 = LINE('',#27184,#27185); +#27184 = CARTESIAN_POINT('',(-0.3,-47.96,0.9)); +#27185 = VECTOR('',#27186,1.); +#27186 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27187 = ORIENTED_EDGE('',*,*,#27188,.F.); +#27188 = EDGE_CURVE('',#22670,#27181,#27189,.T.); +#27189 = LINE('',#27190,#27191); +#27190 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#27191 = VECTOR('',#27192,1.); +#27192 = DIRECTION('',(0.,-0.,-1.)); +#27193 = ORIENTED_EDGE('',*,*,#22677,.F.); +#27194 = PLANE('',#27195); +#27195 = AXIS2_PLACEMENT_3D('',#27196,#27197,#27198); +#27196 = CARTESIAN_POINT('',(-0.3,-47.96,8.2)); +#27197 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27198 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27199 = ADVANCED_FACE('',(#27200),#27243,.F.); +#27200 = FACE_BOUND('',#27201,.F.); +#27201 = EDGE_LOOP('',(#27202,#27203,#27204,#27212,#27220,#27228,#27236, + #27242)); +#27202 = ORIENTED_EDGE('',*,*,#22694,.F.); +#27203 = ORIENTED_EDGE('',*,*,#27188,.T.); +#27204 = ORIENTED_EDGE('',*,*,#27205,.T.); +#27205 = EDGE_CURVE('',#27181,#27206,#27208,.T.); +#27206 = VERTEX_POINT('',#27207); +#27207 = CARTESIAN_POINT('',(-0.1,-48.56,0.9)); +#27208 = LINE('',#27209,#27210); +#27209 = CARTESIAN_POINT('',(-0.3,-48.56,0.9)); +#27210 = VECTOR('',#27211,1.); +#27211 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27212 = ORIENTED_EDGE('',*,*,#27213,.F.); +#27213 = EDGE_CURVE('',#27214,#27206,#27216,.T.); +#27214 = VERTEX_POINT('',#27215); +#27215 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#27216 = LINE('',#27217,#27218); +#27217 = CARTESIAN_POINT('',(-0.1,-48.56,6.055738799212)); +#27218 = VECTOR('',#27219,1.); +#27219 = DIRECTION('',(-0.,0.,-1.)); +#27220 = ORIENTED_EDGE('',*,*,#27221,.T.); +#27221 = EDGE_CURVE('',#27214,#27222,#27224,.T.); +#27222 = VERTEX_POINT('',#27223); +#27223 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,7.4)); +#27224 = LINE('',#27225,#27226); +#27225 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#27226 = VECTOR('',#27227,1.); +#27227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27228 = ORIENTED_EDGE('',*,*,#27229,.T.); +#27229 = EDGE_CURVE('',#27222,#27230,#27232,.T.); +#27230 = VERTEX_POINT('',#27231); +#27231 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,0.9)); +#27232 = LINE('',#27233,#27234); +#27233 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,6.055738799212)); +#27234 = VECTOR('',#27235,1.); +#27235 = DIRECTION('',(-0.,0.,-1.)); +#27236 = ORIENTED_EDGE('',*,*,#27237,.T.); +#27237 = EDGE_CURVE('',#27230,#27093,#27238,.T.); +#27238 = LINE('',#27239,#27240); +#27239 = CARTESIAN_POINT('',(-0.3,-48.56,0.9)); +#27240 = VECTOR('',#27241,1.); +#27241 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27242 = ORIENTED_EDGE('',*,*,#27092,.F.); +#27243 = PLANE('',#27244); +#27244 = AXIS2_PLACEMENT_3D('',#27245,#27246,#27247); +#27245 = CARTESIAN_POINT('',(-0.3,-48.56,8.2)); +#27246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27247 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27248 = ADVANCED_FACE('',(#27249),#27274,.F.); +#27249 = FACE_BOUND('',#27250,.F.); +#27250 = EDGE_LOOP('',(#27251,#27259,#27267,#27273)); +#27251 = ORIENTED_EDGE('',*,*,#27252,.T.); +#27252 = EDGE_CURVE('',#22709,#27253,#27255,.T.); +#27253 = VERTEX_POINT('',#27254); +#27254 = CARTESIAN_POINT('',(0.3,-46.02,0.9)); +#27255 = LINE('',#27256,#27257); +#27256 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#27257 = VECTOR('',#27258,1.); +#27258 = DIRECTION('',(0.,-0.,-1.)); +#27259 = ORIENTED_EDGE('',*,*,#27260,.T.); +#27260 = EDGE_CURVE('',#27253,#27261,#27263,.T.); +#27261 = VERTEX_POINT('',#27262); +#27262 = CARTESIAN_POINT('',(0.3,-45.42,0.9)); +#27263 = LINE('',#27264,#27265); +#27264 = CARTESIAN_POINT('',(0.3,-46.02,0.9)); +#27265 = VECTOR('',#27266,1.); +#27266 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27267 = ORIENTED_EDGE('',*,*,#27268,.F.); +#27268 = EDGE_CURVE('',#22718,#27261,#27269,.T.); +#27269 = LINE('',#27270,#27271); +#27270 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#27271 = VECTOR('',#27272,1.); +#27272 = DIRECTION('',(0.,-0.,-1.)); +#27273 = ORIENTED_EDGE('',*,*,#22725,.F.); +#27274 = PLANE('',#27275); +#27275 = AXIS2_PLACEMENT_3D('',#27276,#27277,#27278); +#27276 = CARTESIAN_POINT('',(0.3,-46.02,8.2)); +#27277 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27278 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27279 = ADVANCED_FACE('',(#27280),#27330,.F.); +#27280 = FACE_BOUND('',#27281,.F.); +#27281 = EDGE_LOOP('',(#27282,#27283,#27284,#27292,#27300,#27308,#27316, + #27324)); +#27282 = ORIENTED_EDGE('',*,*,#22749,.F.); +#27283 = ORIENTED_EDGE('',*,*,#27268,.T.); +#27284 = ORIENTED_EDGE('',*,*,#27285,.T.); +#27285 = EDGE_CURVE('',#27261,#27286,#27288,.T.); +#27286 = VERTEX_POINT('',#27287); +#27287 = CARTESIAN_POINT('',(0.1,-45.42,0.9)); +#27288 = LINE('',#27289,#27290); +#27289 = CARTESIAN_POINT('',(0.3,-45.42,0.9)); +#27290 = VECTOR('',#27291,1.); +#27291 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27292 = ORIENTED_EDGE('',*,*,#27293,.T.); +#27293 = EDGE_CURVE('',#27286,#27294,#27296,.T.); +#27294 = VERTEX_POINT('',#27295); +#27295 = CARTESIAN_POINT('',(9.999999999999E-02,-45.42,7.4)); +#27296 = LINE('',#27297,#27298); +#27297 = CARTESIAN_POINT('',(0.1,-45.42,6.055738799212)); +#27298 = VECTOR('',#27299,1.); +#27299 = DIRECTION('',(0.,-0.,1.)); +#27300 = ORIENTED_EDGE('',*,*,#27301,.F.); +#27301 = EDGE_CURVE('',#27302,#27294,#27304,.T.); +#27302 = VERTEX_POINT('',#27303); +#27303 = CARTESIAN_POINT('',(-0.1,-45.42,7.4)); +#27304 = LINE('',#27305,#27306); +#27305 = CARTESIAN_POINT('',(-0.1,-45.42,7.4)); +#27306 = VECTOR('',#27307,1.); +#27307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27308 = ORIENTED_EDGE('',*,*,#27309,.F.); +#27309 = EDGE_CURVE('',#27310,#27302,#27312,.T.); +#27310 = VERTEX_POINT('',#27311); +#27311 = CARTESIAN_POINT('',(-0.1,-45.42,0.9)); +#27312 = LINE('',#27313,#27314); +#27313 = CARTESIAN_POINT('',(-0.1,-45.42,6.055738799212)); +#27314 = VECTOR('',#27315,1.); +#27315 = DIRECTION('',(0.,-0.,1.)); +#27316 = ORIENTED_EDGE('',*,*,#27317,.T.); +#27317 = EDGE_CURVE('',#27310,#27318,#27320,.T.); +#27318 = VERTEX_POINT('',#27319); +#27319 = CARTESIAN_POINT('',(-0.3,-45.42,0.9)); +#27320 = LINE('',#27321,#27322); +#27321 = CARTESIAN_POINT('',(0.3,-45.42,0.9)); +#27322 = VECTOR('',#27323,1.); +#27323 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27324 = ORIENTED_EDGE('',*,*,#27325,.F.); +#27325 = EDGE_CURVE('',#22742,#27318,#27326,.T.); +#27326 = LINE('',#27327,#27328); +#27327 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#27328 = VECTOR('',#27329,1.); +#27329 = DIRECTION('',(0.,-0.,-1.)); +#27330 = PLANE('',#27331); +#27331 = AXIS2_PLACEMENT_3D('',#27332,#27333,#27334); +#27332 = CARTESIAN_POINT('',(0.3,-45.42,8.2)); +#27333 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27334 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27335 = ADVANCED_FACE('',(#27336),#27354,.F.); +#27336 = FACE_BOUND('',#27337,.F.); +#27337 = EDGE_LOOP('',(#27338,#27339,#27347,#27353)); +#27338 = ORIENTED_EDGE('',*,*,#27325,.T.); +#27339 = ORIENTED_EDGE('',*,*,#27340,.T.); +#27340 = EDGE_CURVE('',#27318,#27341,#27343,.T.); +#27341 = VERTEX_POINT('',#27342); +#27342 = CARTESIAN_POINT('',(-0.3,-46.02,0.9)); +#27343 = LINE('',#27344,#27345); +#27344 = CARTESIAN_POINT('',(-0.3,-45.42,0.9)); +#27345 = VECTOR('',#27346,1.); +#27346 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27347 = ORIENTED_EDGE('',*,*,#27348,.F.); +#27348 = EDGE_CURVE('',#22766,#27341,#27349,.T.); +#27349 = LINE('',#27350,#27351); +#27350 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#27351 = VECTOR('',#27352,1.); +#27352 = DIRECTION('',(0.,-0.,-1.)); +#27353 = ORIENTED_EDGE('',*,*,#22773,.F.); +#27354 = PLANE('',#27355); +#27355 = AXIS2_PLACEMENT_3D('',#27356,#27357,#27358); +#27356 = CARTESIAN_POINT('',(-0.3,-45.42,8.2)); +#27357 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27358 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27359 = ADVANCED_FACE('',(#27360),#27403,.F.); +#27360 = FACE_BOUND('',#27361,.F.); +#27361 = EDGE_LOOP('',(#27362,#27363,#27364,#27372,#27380,#27388,#27396, + #27402)); +#27362 = ORIENTED_EDGE('',*,*,#22790,.F.); +#27363 = ORIENTED_EDGE('',*,*,#27348,.T.); +#27364 = ORIENTED_EDGE('',*,*,#27365,.T.); +#27365 = EDGE_CURVE('',#27341,#27366,#27368,.T.); +#27366 = VERTEX_POINT('',#27367); +#27367 = CARTESIAN_POINT('',(-0.1,-46.02,0.9)); +#27368 = LINE('',#27369,#27370); +#27369 = CARTESIAN_POINT('',(-0.3,-46.02,0.9)); +#27370 = VECTOR('',#27371,1.); +#27371 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27372 = ORIENTED_EDGE('',*,*,#27373,.F.); +#27373 = EDGE_CURVE('',#27374,#27366,#27376,.T.); +#27374 = VERTEX_POINT('',#27375); +#27375 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#27376 = LINE('',#27377,#27378); +#27377 = CARTESIAN_POINT('',(-0.1,-46.02,6.055738799212)); +#27378 = VECTOR('',#27379,1.); +#27379 = DIRECTION('',(-0.,0.,-1.)); +#27380 = ORIENTED_EDGE('',*,*,#27381,.T.); +#27381 = EDGE_CURVE('',#27374,#27382,#27384,.T.); +#27382 = VERTEX_POINT('',#27383); +#27383 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,7.4)); +#27384 = LINE('',#27385,#27386); +#27385 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#27386 = VECTOR('',#27387,1.); +#27387 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27388 = ORIENTED_EDGE('',*,*,#27389,.T.); +#27389 = EDGE_CURVE('',#27382,#27390,#27392,.T.); +#27390 = VERTEX_POINT('',#27391); +#27391 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,0.9)); +#27392 = LINE('',#27393,#27394); +#27393 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,6.055738799212)); +#27394 = VECTOR('',#27395,1.); +#27395 = DIRECTION('',(-0.,0.,-1.)); +#27396 = ORIENTED_EDGE('',*,*,#27397,.T.); +#27397 = EDGE_CURVE('',#27390,#27253,#27398,.T.); +#27398 = LINE('',#27399,#27400); +#27399 = CARTESIAN_POINT('',(-0.3,-46.02,0.9)); +#27400 = VECTOR('',#27401,1.); +#27401 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27402 = ORIENTED_EDGE('',*,*,#27252,.F.); +#27403 = PLANE('',#27404); +#27404 = AXIS2_PLACEMENT_3D('',#27405,#27406,#27407); +#27405 = CARTESIAN_POINT('',(-0.3,-46.02,8.2)); +#27406 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27407 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27408 = ADVANCED_FACE('',(#27409),#27434,.F.); +#27409 = FACE_BOUND('',#27410,.F.); +#27410 = EDGE_LOOP('',(#27411,#27419,#27427,#27433)); +#27411 = ORIENTED_EDGE('',*,*,#27412,.T.); +#27412 = EDGE_CURVE('',#22805,#27413,#27415,.T.); +#27413 = VERTEX_POINT('',#27414); +#27414 = CARTESIAN_POINT('',(0.3,-43.48,0.9)); +#27415 = LINE('',#27416,#27417); +#27416 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#27417 = VECTOR('',#27418,1.); +#27418 = DIRECTION('',(0.,-0.,-1.)); +#27419 = ORIENTED_EDGE('',*,*,#27420,.T.); +#27420 = EDGE_CURVE('',#27413,#27421,#27423,.T.); +#27421 = VERTEX_POINT('',#27422); +#27422 = CARTESIAN_POINT('',(0.3,-42.88,0.9)); +#27423 = LINE('',#27424,#27425); +#27424 = CARTESIAN_POINT('',(0.3,-43.48,0.9)); +#27425 = VECTOR('',#27426,1.); +#27426 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27427 = ORIENTED_EDGE('',*,*,#27428,.F.); +#27428 = EDGE_CURVE('',#22814,#27421,#27429,.T.); +#27429 = LINE('',#27430,#27431); +#27430 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#27431 = VECTOR('',#27432,1.); +#27432 = DIRECTION('',(0.,-0.,-1.)); +#27433 = ORIENTED_EDGE('',*,*,#22821,.F.); +#27434 = PLANE('',#27435); +#27435 = AXIS2_PLACEMENT_3D('',#27436,#27437,#27438); +#27436 = CARTESIAN_POINT('',(0.3,-43.48,8.2)); +#27437 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27438 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27439 = ADVANCED_FACE('',(#27440),#27490,.F.); +#27440 = FACE_BOUND('',#27441,.F.); +#27441 = EDGE_LOOP('',(#27442,#27443,#27444,#27452,#27460,#27468,#27476, + #27484)); +#27442 = ORIENTED_EDGE('',*,*,#22845,.F.); +#27443 = ORIENTED_EDGE('',*,*,#27428,.T.); +#27444 = ORIENTED_EDGE('',*,*,#27445,.T.); +#27445 = EDGE_CURVE('',#27421,#27446,#27448,.T.); +#27446 = VERTEX_POINT('',#27447); +#27447 = CARTESIAN_POINT('',(0.1,-42.88,0.9)); +#27448 = LINE('',#27449,#27450); +#27449 = CARTESIAN_POINT('',(0.3,-42.88,0.9)); +#27450 = VECTOR('',#27451,1.); +#27451 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27452 = ORIENTED_EDGE('',*,*,#27453,.T.); +#27453 = EDGE_CURVE('',#27446,#27454,#27456,.T.); +#27454 = VERTEX_POINT('',#27455); +#27455 = CARTESIAN_POINT('',(0.1,-42.88,7.4)); +#27456 = LINE('',#27457,#27458); +#27457 = CARTESIAN_POINT('',(0.1,-42.88,6.055738799212)); +#27458 = VECTOR('',#27459,1.); +#27459 = DIRECTION('',(0.,-0.,1.)); +#27460 = ORIENTED_EDGE('',*,*,#27461,.F.); +#27461 = EDGE_CURVE('',#27462,#27454,#27464,.T.); +#27462 = VERTEX_POINT('',#27463); +#27463 = CARTESIAN_POINT('',(-0.1,-42.88,7.4)); +#27464 = LINE('',#27465,#27466); +#27465 = CARTESIAN_POINT('',(-0.1,-42.88,7.4)); +#27466 = VECTOR('',#27467,1.); +#27467 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27468 = ORIENTED_EDGE('',*,*,#27469,.F.); +#27469 = EDGE_CURVE('',#27470,#27462,#27472,.T.); +#27470 = VERTEX_POINT('',#27471); +#27471 = CARTESIAN_POINT('',(-0.1,-42.88,0.9)); +#27472 = LINE('',#27473,#27474); +#27473 = CARTESIAN_POINT('',(-0.1,-42.88,6.055738799212)); +#27474 = VECTOR('',#27475,1.); +#27475 = DIRECTION('',(0.,-0.,1.)); +#27476 = ORIENTED_EDGE('',*,*,#27477,.T.); +#27477 = EDGE_CURVE('',#27470,#27478,#27480,.T.); +#27478 = VERTEX_POINT('',#27479); +#27479 = CARTESIAN_POINT('',(-0.3,-42.88,0.9)); +#27480 = LINE('',#27481,#27482); +#27481 = CARTESIAN_POINT('',(0.3,-42.88,0.9)); +#27482 = VECTOR('',#27483,1.); +#27483 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27484 = ORIENTED_EDGE('',*,*,#27485,.F.); +#27485 = EDGE_CURVE('',#22838,#27478,#27486,.T.); +#27486 = LINE('',#27487,#27488); +#27487 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#27488 = VECTOR('',#27489,1.); +#27489 = DIRECTION('',(0.,-0.,-1.)); +#27490 = PLANE('',#27491); +#27491 = AXIS2_PLACEMENT_3D('',#27492,#27493,#27494); +#27492 = CARTESIAN_POINT('',(0.3,-42.88,8.2)); +#27493 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27494 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27495 = ADVANCED_FACE('',(#27496),#27514,.F.); +#27496 = FACE_BOUND('',#27497,.F.); +#27497 = EDGE_LOOP('',(#27498,#27499,#27507,#27513)); +#27498 = ORIENTED_EDGE('',*,*,#27485,.T.); +#27499 = ORIENTED_EDGE('',*,*,#27500,.T.); +#27500 = EDGE_CURVE('',#27478,#27501,#27503,.T.); +#27501 = VERTEX_POINT('',#27502); +#27502 = CARTESIAN_POINT('',(-0.3,-43.48,0.9)); +#27503 = LINE('',#27504,#27505); +#27504 = CARTESIAN_POINT('',(-0.3,-42.88,0.9)); +#27505 = VECTOR('',#27506,1.); +#27506 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27507 = ORIENTED_EDGE('',*,*,#27508,.F.); +#27508 = EDGE_CURVE('',#22862,#27501,#27509,.T.); +#27509 = LINE('',#27510,#27511); +#27510 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#27511 = VECTOR('',#27512,1.); +#27512 = DIRECTION('',(0.,-0.,-1.)); +#27513 = ORIENTED_EDGE('',*,*,#22869,.F.); +#27514 = PLANE('',#27515); +#27515 = AXIS2_PLACEMENT_3D('',#27516,#27517,#27518); +#27516 = CARTESIAN_POINT('',(-0.3,-42.88,8.2)); +#27517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27518 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27519 = ADVANCED_FACE('',(#27520),#27563,.F.); +#27520 = FACE_BOUND('',#27521,.F.); +#27521 = EDGE_LOOP('',(#27522,#27523,#27524,#27532,#27540,#27548,#27556, + #27562)); +#27522 = ORIENTED_EDGE('',*,*,#22886,.F.); +#27523 = ORIENTED_EDGE('',*,*,#27508,.T.); +#27524 = ORIENTED_EDGE('',*,*,#27525,.T.); +#27525 = EDGE_CURVE('',#27501,#27526,#27528,.T.); +#27526 = VERTEX_POINT('',#27527); +#27527 = CARTESIAN_POINT('',(-0.1,-43.48,0.9)); +#27528 = LINE('',#27529,#27530); +#27529 = CARTESIAN_POINT('',(-0.3,-43.48,0.9)); +#27530 = VECTOR('',#27531,1.); +#27531 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27532 = ORIENTED_EDGE('',*,*,#27533,.F.); +#27533 = EDGE_CURVE('',#27534,#27526,#27536,.T.); +#27534 = VERTEX_POINT('',#27535); +#27535 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#27536 = LINE('',#27537,#27538); +#27537 = CARTESIAN_POINT('',(-0.1,-43.48,6.055738799212)); +#27538 = VECTOR('',#27539,1.); +#27539 = DIRECTION('',(-0.,0.,-1.)); +#27540 = ORIENTED_EDGE('',*,*,#27541,.T.); +#27541 = EDGE_CURVE('',#27534,#27542,#27544,.T.); +#27542 = VERTEX_POINT('',#27543); +#27543 = CARTESIAN_POINT('',(0.1,-43.48,7.4)); +#27544 = LINE('',#27545,#27546); +#27545 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#27546 = VECTOR('',#27547,1.); +#27547 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27548 = ORIENTED_EDGE('',*,*,#27549,.T.); +#27549 = EDGE_CURVE('',#27542,#27550,#27552,.T.); +#27550 = VERTEX_POINT('',#27551); +#27551 = CARTESIAN_POINT('',(0.1,-43.48,0.9)); +#27552 = LINE('',#27553,#27554); +#27553 = CARTESIAN_POINT('',(0.1,-43.48,6.055738799212)); +#27554 = VECTOR('',#27555,1.); +#27555 = DIRECTION('',(-0.,0.,-1.)); +#27556 = ORIENTED_EDGE('',*,*,#27557,.T.); +#27557 = EDGE_CURVE('',#27550,#27413,#27558,.T.); +#27558 = LINE('',#27559,#27560); +#27559 = CARTESIAN_POINT('',(-0.3,-43.48,0.9)); +#27560 = VECTOR('',#27561,1.); +#27561 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27562 = ORIENTED_EDGE('',*,*,#27412,.F.); +#27563 = PLANE('',#27564); +#27564 = AXIS2_PLACEMENT_3D('',#27565,#27566,#27567); +#27565 = CARTESIAN_POINT('',(-0.3,-43.48,8.2)); +#27566 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27567 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27568 = ADVANCED_FACE('',(#27569),#27594,.F.); +#27569 = FACE_BOUND('',#27570,.F.); +#27570 = EDGE_LOOP('',(#27571,#27579,#27587,#27593)); +#27571 = ORIENTED_EDGE('',*,*,#27572,.T.); +#27572 = EDGE_CURVE('',#22901,#27573,#27575,.T.); +#27573 = VERTEX_POINT('',#27574); +#27574 = CARTESIAN_POINT('',(0.3,-40.94,0.9)); +#27575 = LINE('',#27576,#27577); +#27576 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#27577 = VECTOR('',#27578,1.); +#27578 = DIRECTION('',(0.,-0.,-1.)); +#27579 = ORIENTED_EDGE('',*,*,#27580,.T.); +#27580 = EDGE_CURVE('',#27573,#27581,#27583,.T.); +#27581 = VERTEX_POINT('',#27582); +#27582 = CARTESIAN_POINT('',(0.3,-40.34,0.9)); +#27583 = LINE('',#27584,#27585); +#27584 = CARTESIAN_POINT('',(0.3,-40.94,0.9)); +#27585 = VECTOR('',#27586,1.); +#27586 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27587 = ORIENTED_EDGE('',*,*,#27588,.F.); +#27588 = EDGE_CURVE('',#22910,#27581,#27589,.T.); +#27589 = LINE('',#27590,#27591); +#27590 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#27591 = VECTOR('',#27592,1.); +#27592 = DIRECTION('',(0.,-0.,-1.)); +#27593 = ORIENTED_EDGE('',*,*,#22917,.F.); +#27594 = PLANE('',#27595); +#27595 = AXIS2_PLACEMENT_3D('',#27596,#27597,#27598); +#27596 = CARTESIAN_POINT('',(0.3,-40.94,8.2)); +#27597 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27598 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27599 = ADVANCED_FACE('',(#27600),#27650,.F.); +#27600 = FACE_BOUND('',#27601,.F.); +#27601 = EDGE_LOOP('',(#27602,#27603,#27604,#27612,#27620,#27628,#27636, + #27644)); +#27602 = ORIENTED_EDGE('',*,*,#22941,.F.); +#27603 = ORIENTED_EDGE('',*,*,#27588,.T.); +#27604 = ORIENTED_EDGE('',*,*,#27605,.T.); +#27605 = EDGE_CURVE('',#27581,#27606,#27608,.T.); +#27606 = VERTEX_POINT('',#27607); +#27607 = CARTESIAN_POINT('',(0.1,-40.34,0.9)); +#27608 = LINE('',#27609,#27610); +#27609 = CARTESIAN_POINT('',(0.3,-40.34,0.9)); +#27610 = VECTOR('',#27611,1.); +#27611 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27612 = ORIENTED_EDGE('',*,*,#27613,.T.); +#27613 = EDGE_CURVE('',#27606,#27614,#27616,.T.); +#27614 = VERTEX_POINT('',#27615); +#27615 = CARTESIAN_POINT('',(0.1,-40.34,7.4)); +#27616 = LINE('',#27617,#27618); +#27617 = CARTESIAN_POINT('',(0.1,-40.34,6.055738799212)); +#27618 = VECTOR('',#27619,1.); +#27619 = DIRECTION('',(0.,-0.,1.)); +#27620 = ORIENTED_EDGE('',*,*,#27621,.F.); +#27621 = EDGE_CURVE('',#27622,#27614,#27624,.T.); +#27622 = VERTEX_POINT('',#27623); +#27623 = CARTESIAN_POINT('',(-0.1,-40.34,7.4)); +#27624 = LINE('',#27625,#27626); +#27625 = CARTESIAN_POINT('',(-0.1,-40.34,7.4)); +#27626 = VECTOR('',#27627,1.); +#27627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27628 = ORIENTED_EDGE('',*,*,#27629,.F.); +#27629 = EDGE_CURVE('',#27630,#27622,#27632,.T.); +#27630 = VERTEX_POINT('',#27631); +#27631 = CARTESIAN_POINT('',(-0.1,-40.34,0.9)); +#27632 = LINE('',#27633,#27634); +#27633 = CARTESIAN_POINT('',(-0.1,-40.34,6.055738799212)); +#27634 = VECTOR('',#27635,1.); +#27635 = DIRECTION('',(0.,-0.,1.)); +#27636 = ORIENTED_EDGE('',*,*,#27637,.T.); +#27637 = EDGE_CURVE('',#27630,#27638,#27640,.T.); +#27638 = VERTEX_POINT('',#27639); +#27639 = CARTESIAN_POINT('',(-0.3,-40.34,0.9)); +#27640 = LINE('',#27641,#27642); +#27641 = CARTESIAN_POINT('',(0.3,-40.34,0.9)); +#27642 = VECTOR('',#27643,1.); +#27643 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27644 = ORIENTED_EDGE('',*,*,#27645,.F.); +#27645 = EDGE_CURVE('',#22934,#27638,#27646,.T.); +#27646 = LINE('',#27647,#27648); +#27647 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#27648 = VECTOR('',#27649,1.); +#27649 = DIRECTION('',(0.,-0.,-1.)); +#27650 = PLANE('',#27651); +#27651 = AXIS2_PLACEMENT_3D('',#27652,#27653,#27654); +#27652 = CARTESIAN_POINT('',(0.3,-40.34,8.2)); +#27653 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27654 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27655 = ADVANCED_FACE('',(#27656),#27674,.F.); +#27656 = FACE_BOUND('',#27657,.F.); +#27657 = EDGE_LOOP('',(#27658,#27659,#27667,#27673)); +#27658 = ORIENTED_EDGE('',*,*,#27645,.T.); +#27659 = ORIENTED_EDGE('',*,*,#27660,.T.); +#27660 = EDGE_CURVE('',#27638,#27661,#27663,.T.); +#27661 = VERTEX_POINT('',#27662); +#27662 = CARTESIAN_POINT('',(-0.3,-40.94,0.9)); +#27663 = LINE('',#27664,#27665); +#27664 = CARTESIAN_POINT('',(-0.3,-40.34,0.9)); +#27665 = VECTOR('',#27666,1.); +#27666 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27667 = ORIENTED_EDGE('',*,*,#27668,.F.); +#27668 = EDGE_CURVE('',#22958,#27661,#27669,.T.); +#27669 = LINE('',#27670,#27671); +#27670 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#27671 = VECTOR('',#27672,1.); +#27672 = DIRECTION('',(0.,-0.,-1.)); +#27673 = ORIENTED_EDGE('',*,*,#22965,.F.); +#27674 = PLANE('',#27675); +#27675 = AXIS2_PLACEMENT_3D('',#27676,#27677,#27678); +#27676 = CARTESIAN_POINT('',(-0.3,-40.34,8.2)); +#27677 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27678 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27679 = ADVANCED_FACE('',(#27680),#27723,.F.); +#27680 = FACE_BOUND('',#27681,.F.); +#27681 = EDGE_LOOP('',(#27682,#27683,#27684,#27692,#27700,#27708,#27716, + #27722)); +#27682 = ORIENTED_EDGE('',*,*,#22982,.F.); +#27683 = ORIENTED_EDGE('',*,*,#27668,.T.); +#27684 = ORIENTED_EDGE('',*,*,#27685,.T.); +#27685 = EDGE_CURVE('',#27661,#27686,#27688,.T.); +#27686 = VERTEX_POINT('',#27687); +#27687 = CARTESIAN_POINT('',(-0.1,-40.94,0.9)); +#27688 = LINE('',#27689,#27690); +#27689 = CARTESIAN_POINT('',(-0.3,-40.94,0.9)); +#27690 = VECTOR('',#27691,1.); +#27691 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27692 = ORIENTED_EDGE('',*,*,#27693,.F.); +#27693 = EDGE_CURVE('',#27694,#27686,#27696,.T.); +#27694 = VERTEX_POINT('',#27695); +#27695 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#27696 = LINE('',#27697,#27698); +#27697 = CARTESIAN_POINT('',(-0.1,-40.94,6.055738799212)); +#27698 = VECTOR('',#27699,1.); +#27699 = DIRECTION('',(-0.,0.,-1.)); +#27700 = ORIENTED_EDGE('',*,*,#27701,.T.); +#27701 = EDGE_CURVE('',#27694,#27702,#27704,.T.); +#27702 = VERTEX_POINT('',#27703); +#27703 = CARTESIAN_POINT('',(0.1,-40.94,7.4)); +#27704 = LINE('',#27705,#27706); +#27705 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#27706 = VECTOR('',#27707,1.); +#27707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27708 = ORIENTED_EDGE('',*,*,#27709,.T.); +#27709 = EDGE_CURVE('',#27702,#27710,#27712,.T.); +#27710 = VERTEX_POINT('',#27711); +#27711 = CARTESIAN_POINT('',(0.1,-40.94,0.9)); +#27712 = LINE('',#27713,#27714); +#27713 = CARTESIAN_POINT('',(0.1,-40.94,6.055738799212)); +#27714 = VECTOR('',#27715,1.); +#27715 = DIRECTION('',(-0.,0.,-1.)); +#27716 = ORIENTED_EDGE('',*,*,#27717,.T.); +#27717 = EDGE_CURVE('',#27710,#27573,#27718,.T.); +#27718 = LINE('',#27719,#27720); +#27719 = CARTESIAN_POINT('',(-0.3,-40.94,0.9)); +#27720 = VECTOR('',#27721,1.); +#27721 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27722 = ORIENTED_EDGE('',*,*,#27572,.F.); +#27723 = PLANE('',#27724); +#27724 = AXIS2_PLACEMENT_3D('',#27725,#27726,#27727); +#27725 = CARTESIAN_POINT('',(-0.3,-40.94,8.2)); +#27726 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27727 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27728 = ADVANCED_FACE('',(#27729),#27754,.F.); +#27729 = FACE_BOUND('',#27730,.F.); +#27730 = EDGE_LOOP('',(#27731,#27739,#27747,#27753)); +#27731 = ORIENTED_EDGE('',*,*,#27732,.T.); +#27732 = EDGE_CURVE('',#22997,#27733,#27735,.T.); +#27733 = VERTEX_POINT('',#27734); +#27734 = CARTESIAN_POINT('',(0.3,-38.4,0.9)); +#27735 = LINE('',#27736,#27737); +#27736 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#27737 = VECTOR('',#27738,1.); +#27738 = DIRECTION('',(0.,-0.,-1.)); +#27739 = ORIENTED_EDGE('',*,*,#27740,.T.); +#27740 = EDGE_CURVE('',#27733,#27741,#27743,.T.); +#27741 = VERTEX_POINT('',#27742); +#27742 = CARTESIAN_POINT('',(0.3,-37.8,0.9)); +#27743 = LINE('',#27744,#27745); +#27744 = CARTESIAN_POINT('',(0.3,-38.4,0.9)); +#27745 = VECTOR('',#27746,1.); +#27746 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27747 = ORIENTED_EDGE('',*,*,#27748,.F.); +#27748 = EDGE_CURVE('',#23006,#27741,#27749,.T.); +#27749 = LINE('',#27750,#27751); +#27750 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#27751 = VECTOR('',#27752,1.); +#27752 = DIRECTION('',(0.,-0.,-1.)); +#27753 = ORIENTED_EDGE('',*,*,#23013,.F.); +#27754 = PLANE('',#27755); +#27755 = AXIS2_PLACEMENT_3D('',#27756,#27757,#27758); +#27756 = CARTESIAN_POINT('',(0.3,-38.4,8.2)); +#27757 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27758 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27759 = ADVANCED_FACE('',(#27760),#27810,.F.); +#27760 = FACE_BOUND('',#27761,.F.); +#27761 = EDGE_LOOP('',(#27762,#27763,#27764,#27772,#27780,#27788,#27796, + #27804)); +#27762 = ORIENTED_EDGE('',*,*,#23037,.F.); +#27763 = ORIENTED_EDGE('',*,*,#27748,.T.); +#27764 = ORIENTED_EDGE('',*,*,#27765,.T.); +#27765 = EDGE_CURVE('',#27741,#27766,#27768,.T.); +#27766 = VERTEX_POINT('',#27767); +#27767 = CARTESIAN_POINT('',(0.1,-37.8,0.9)); +#27768 = LINE('',#27769,#27770); +#27769 = CARTESIAN_POINT('',(0.3,-37.8,0.9)); +#27770 = VECTOR('',#27771,1.); +#27771 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27772 = ORIENTED_EDGE('',*,*,#27773,.T.); +#27773 = EDGE_CURVE('',#27766,#27774,#27776,.T.); +#27774 = VERTEX_POINT('',#27775); +#27775 = CARTESIAN_POINT('',(0.1,-37.8,7.4)); +#27776 = LINE('',#27777,#27778); +#27777 = CARTESIAN_POINT('',(0.1,-37.8,6.055738799212)); +#27778 = VECTOR('',#27779,1.); +#27779 = DIRECTION('',(0.,-0.,1.)); +#27780 = ORIENTED_EDGE('',*,*,#27781,.F.); +#27781 = EDGE_CURVE('',#27782,#27774,#27784,.T.); +#27782 = VERTEX_POINT('',#27783); +#27783 = CARTESIAN_POINT('',(-0.1,-37.8,7.4)); +#27784 = LINE('',#27785,#27786); +#27785 = CARTESIAN_POINT('',(-0.1,-37.8,7.4)); +#27786 = VECTOR('',#27787,1.); +#27787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27788 = ORIENTED_EDGE('',*,*,#27789,.F.); +#27789 = EDGE_CURVE('',#27790,#27782,#27792,.T.); +#27790 = VERTEX_POINT('',#27791); +#27791 = CARTESIAN_POINT('',(-0.1,-37.8,0.9)); +#27792 = LINE('',#27793,#27794); +#27793 = CARTESIAN_POINT('',(-0.1,-37.8,6.055738799212)); +#27794 = VECTOR('',#27795,1.); +#27795 = DIRECTION('',(0.,-0.,1.)); +#27796 = ORIENTED_EDGE('',*,*,#27797,.T.); +#27797 = EDGE_CURVE('',#27790,#27798,#27800,.T.); +#27798 = VERTEX_POINT('',#27799); +#27799 = CARTESIAN_POINT('',(-0.3,-37.8,0.9)); +#27800 = LINE('',#27801,#27802); +#27801 = CARTESIAN_POINT('',(0.3,-37.8,0.9)); +#27802 = VECTOR('',#27803,1.); +#27803 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27804 = ORIENTED_EDGE('',*,*,#27805,.F.); +#27805 = EDGE_CURVE('',#23030,#27798,#27806,.T.); +#27806 = LINE('',#27807,#27808); +#27807 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#27808 = VECTOR('',#27809,1.); +#27809 = DIRECTION('',(0.,-0.,-1.)); +#27810 = PLANE('',#27811); +#27811 = AXIS2_PLACEMENT_3D('',#27812,#27813,#27814); +#27812 = CARTESIAN_POINT('',(0.3,-37.8,8.2)); +#27813 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27814 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27815 = ADVANCED_FACE('',(#27816),#27834,.F.); +#27816 = FACE_BOUND('',#27817,.F.); +#27817 = EDGE_LOOP('',(#27818,#27819,#27827,#27833)); +#27818 = ORIENTED_EDGE('',*,*,#27805,.T.); +#27819 = ORIENTED_EDGE('',*,*,#27820,.T.); +#27820 = EDGE_CURVE('',#27798,#27821,#27823,.T.); +#27821 = VERTEX_POINT('',#27822); +#27822 = CARTESIAN_POINT('',(-0.3,-38.4,0.9)); +#27823 = LINE('',#27824,#27825); +#27824 = CARTESIAN_POINT('',(-0.3,-37.8,0.9)); +#27825 = VECTOR('',#27826,1.); +#27826 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27827 = ORIENTED_EDGE('',*,*,#27828,.F.); +#27828 = EDGE_CURVE('',#23054,#27821,#27829,.T.); +#27829 = LINE('',#27830,#27831); +#27830 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#27831 = VECTOR('',#27832,1.); +#27832 = DIRECTION('',(0.,-0.,-1.)); +#27833 = ORIENTED_EDGE('',*,*,#23061,.F.); +#27834 = PLANE('',#27835); +#27835 = AXIS2_PLACEMENT_3D('',#27836,#27837,#27838); +#27836 = CARTESIAN_POINT('',(-0.3,-37.8,8.2)); +#27837 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27838 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27839 = ADVANCED_FACE('',(#27840),#27883,.F.); +#27840 = FACE_BOUND('',#27841,.F.); +#27841 = EDGE_LOOP('',(#27842,#27843,#27844,#27852,#27860,#27868,#27876, + #27882)); +#27842 = ORIENTED_EDGE('',*,*,#23078,.F.); +#27843 = ORIENTED_EDGE('',*,*,#27828,.T.); +#27844 = ORIENTED_EDGE('',*,*,#27845,.T.); +#27845 = EDGE_CURVE('',#27821,#27846,#27848,.T.); +#27846 = VERTEX_POINT('',#27847); +#27847 = CARTESIAN_POINT('',(-0.1,-38.4,0.9)); +#27848 = LINE('',#27849,#27850); +#27849 = CARTESIAN_POINT('',(-0.3,-38.4,0.9)); +#27850 = VECTOR('',#27851,1.); +#27851 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27852 = ORIENTED_EDGE('',*,*,#27853,.F.); +#27853 = EDGE_CURVE('',#27854,#27846,#27856,.T.); +#27854 = VERTEX_POINT('',#27855); +#27855 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#27856 = LINE('',#27857,#27858); +#27857 = CARTESIAN_POINT('',(-0.1,-38.4,6.055738799212)); +#27858 = VECTOR('',#27859,1.); +#27859 = DIRECTION('',(-0.,0.,-1.)); +#27860 = ORIENTED_EDGE('',*,*,#27861,.T.); +#27861 = EDGE_CURVE('',#27854,#27862,#27864,.T.); +#27862 = VERTEX_POINT('',#27863); +#27863 = CARTESIAN_POINT('',(0.1,-38.4,7.4)); +#27864 = LINE('',#27865,#27866); +#27865 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#27866 = VECTOR('',#27867,1.); +#27867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27868 = ORIENTED_EDGE('',*,*,#27869,.T.); +#27869 = EDGE_CURVE('',#27862,#27870,#27872,.T.); +#27870 = VERTEX_POINT('',#27871); +#27871 = CARTESIAN_POINT('',(0.1,-38.4,0.9)); +#27872 = LINE('',#27873,#27874); +#27873 = CARTESIAN_POINT('',(0.1,-38.4,6.055738799212)); +#27874 = VECTOR('',#27875,1.); +#27875 = DIRECTION('',(-0.,0.,-1.)); +#27876 = ORIENTED_EDGE('',*,*,#27877,.T.); +#27877 = EDGE_CURVE('',#27870,#27733,#27878,.T.); +#27878 = LINE('',#27879,#27880); +#27879 = CARTESIAN_POINT('',(-0.3,-38.4,0.9)); +#27880 = VECTOR('',#27881,1.); +#27881 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27882 = ORIENTED_EDGE('',*,*,#27732,.F.); +#27883 = PLANE('',#27884); +#27884 = AXIS2_PLACEMENT_3D('',#27885,#27886,#27887); +#27885 = CARTESIAN_POINT('',(-0.3,-38.4,8.2)); +#27886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27887 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27888 = ADVANCED_FACE('',(#27889),#27914,.F.); +#27889 = FACE_BOUND('',#27890,.F.); +#27890 = EDGE_LOOP('',(#27891,#27899,#27907,#27913)); +#27891 = ORIENTED_EDGE('',*,*,#27892,.T.); +#27892 = EDGE_CURVE('',#23093,#27893,#27895,.T.); +#27893 = VERTEX_POINT('',#27894); +#27894 = CARTESIAN_POINT('',(0.3,-35.86,0.9)); +#27895 = LINE('',#27896,#27897); +#27896 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#27897 = VECTOR('',#27898,1.); +#27898 = DIRECTION('',(0.,-0.,-1.)); +#27899 = ORIENTED_EDGE('',*,*,#27900,.T.); +#27900 = EDGE_CURVE('',#27893,#27901,#27903,.T.); +#27901 = VERTEX_POINT('',#27902); +#27902 = CARTESIAN_POINT('',(0.3,-35.26,0.9)); +#27903 = LINE('',#27904,#27905); +#27904 = CARTESIAN_POINT('',(0.3,-35.86,0.9)); +#27905 = VECTOR('',#27906,1.); +#27906 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27907 = ORIENTED_EDGE('',*,*,#27908,.F.); +#27908 = EDGE_CURVE('',#23102,#27901,#27909,.T.); +#27909 = LINE('',#27910,#27911); +#27910 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#27911 = VECTOR('',#27912,1.); +#27912 = DIRECTION('',(0.,-0.,-1.)); +#27913 = ORIENTED_EDGE('',*,*,#23109,.F.); +#27914 = PLANE('',#27915); +#27915 = AXIS2_PLACEMENT_3D('',#27916,#27917,#27918); +#27916 = CARTESIAN_POINT('',(0.3,-35.86,8.2)); +#27917 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27918 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27919 = ADVANCED_FACE('',(#27920),#27970,.F.); +#27920 = FACE_BOUND('',#27921,.F.); +#27921 = EDGE_LOOP('',(#27922,#27923,#27924,#27932,#27940,#27948,#27956, + #27964)); +#27922 = ORIENTED_EDGE('',*,*,#23133,.F.); +#27923 = ORIENTED_EDGE('',*,*,#27908,.T.); +#27924 = ORIENTED_EDGE('',*,*,#27925,.T.); +#27925 = EDGE_CURVE('',#27901,#27926,#27928,.T.); +#27926 = VERTEX_POINT('',#27927); +#27927 = CARTESIAN_POINT('',(0.1,-35.26,0.9)); +#27928 = LINE('',#27929,#27930); +#27929 = CARTESIAN_POINT('',(0.3,-35.26,0.9)); +#27930 = VECTOR('',#27931,1.); +#27931 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27932 = ORIENTED_EDGE('',*,*,#27933,.T.); +#27933 = EDGE_CURVE('',#27926,#27934,#27936,.T.); +#27934 = VERTEX_POINT('',#27935); +#27935 = CARTESIAN_POINT('',(0.1,-35.26,7.4)); +#27936 = LINE('',#27937,#27938); +#27937 = CARTESIAN_POINT('',(0.1,-35.26,6.055738799212)); +#27938 = VECTOR('',#27939,1.); +#27939 = DIRECTION('',(0.,-0.,1.)); +#27940 = ORIENTED_EDGE('',*,*,#27941,.F.); +#27941 = EDGE_CURVE('',#27942,#27934,#27944,.T.); +#27942 = VERTEX_POINT('',#27943); +#27943 = CARTESIAN_POINT('',(-0.1,-35.26,7.4)); +#27944 = LINE('',#27945,#27946); +#27945 = CARTESIAN_POINT('',(-0.1,-35.26,7.4)); +#27946 = VECTOR('',#27947,1.); +#27947 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27948 = ORIENTED_EDGE('',*,*,#27949,.F.); +#27949 = EDGE_CURVE('',#27950,#27942,#27952,.T.); +#27950 = VERTEX_POINT('',#27951); +#27951 = CARTESIAN_POINT('',(-0.1,-35.26,0.9)); +#27952 = LINE('',#27953,#27954); +#27953 = CARTESIAN_POINT('',(-0.1,-35.26,6.055738799212)); +#27954 = VECTOR('',#27955,1.); +#27955 = DIRECTION('',(0.,-0.,1.)); +#27956 = ORIENTED_EDGE('',*,*,#27957,.T.); +#27957 = EDGE_CURVE('',#27950,#27958,#27960,.T.); +#27958 = VERTEX_POINT('',#27959); +#27959 = CARTESIAN_POINT('',(-0.3,-35.26,0.9)); +#27960 = LINE('',#27961,#27962); +#27961 = CARTESIAN_POINT('',(0.3,-35.26,0.9)); +#27962 = VECTOR('',#27963,1.); +#27963 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27964 = ORIENTED_EDGE('',*,*,#27965,.F.); +#27965 = EDGE_CURVE('',#23126,#27958,#27966,.T.); +#27966 = LINE('',#27967,#27968); +#27967 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#27968 = VECTOR('',#27969,1.); +#27969 = DIRECTION('',(0.,-0.,-1.)); +#27970 = PLANE('',#27971); +#27971 = AXIS2_PLACEMENT_3D('',#27972,#27973,#27974); +#27972 = CARTESIAN_POINT('',(0.3,-35.26,8.2)); +#27973 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27974 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27975 = ADVANCED_FACE('',(#27976),#27994,.F.); +#27976 = FACE_BOUND('',#27977,.F.); +#27977 = EDGE_LOOP('',(#27978,#27979,#27987,#27993)); +#27978 = ORIENTED_EDGE('',*,*,#27965,.T.); +#27979 = ORIENTED_EDGE('',*,*,#27980,.T.); +#27980 = EDGE_CURVE('',#27958,#27981,#27983,.T.); +#27981 = VERTEX_POINT('',#27982); +#27982 = CARTESIAN_POINT('',(-0.3,-35.86,0.9)); +#27983 = LINE('',#27984,#27985); +#27984 = CARTESIAN_POINT('',(-0.3,-35.26,0.9)); +#27985 = VECTOR('',#27986,1.); +#27986 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27987 = ORIENTED_EDGE('',*,*,#27988,.F.); +#27988 = EDGE_CURVE('',#23150,#27981,#27989,.T.); +#27989 = LINE('',#27990,#27991); +#27990 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#27991 = VECTOR('',#27992,1.); +#27992 = DIRECTION('',(0.,-0.,-1.)); +#27993 = ORIENTED_EDGE('',*,*,#23157,.F.); +#27994 = PLANE('',#27995); +#27995 = AXIS2_PLACEMENT_3D('',#27996,#27997,#27998); +#27996 = CARTESIAN_POINT('',(-0.3,-35.26,8.2)); +#27997 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27998 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27999 = ADVANCED_FACE('',(#28000),#28043,.F.); +#28000 = FACE_BOUND('',#28001,.F.); +#28001 = EDGE_LOOP('',(#28002,#28003,#28004,#28012,#28020,#28028,#28036, + #28042)); +#28002 = ORIENTED_EDGE('',*,*,#23174,.F.); +#28003 = ORIENTED_EDGE('',*,*,#27988,.T.); +#28004 = ORIENTED_EDGE('',*,*,#28005,.T.); +#28005 = EDGE_CURVE('',#27981,#28006,#28008,.T.); +#28006 = VERTEX_POINT('',#28007); +#28007 = CARTESIAN_POINT('',(-0.1,-35.86,0.9)); +#28008 = LINE('',#28009,#28010); +#28009 = CARTESIAN_POINT('',(-0.3,-35.86,0.9)); +#28010 = VECTOR('',#28011,1.); +#28011 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28012 = ORIENTED_EDGE('',*,*,#28013,.F.); +#28013 = EDGE_CURVE('',#28014,#28006,#28016,.T.); +#28014 = VERTEX_POINT('',#28015); +#28015 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#28016 = LINE('',#28017,#28018); +#28017 = CARTESIAN_POINT('',(-0.1,-35.86,6.055738799212)); +#28018 = VECTOR('',#28019,1.); +#28019 = DIRECTION('',(-0.,0.,-1.)); +#28020 = ORIENTED_EDGE('',*,*,#28021,.T.); +#28021 = EDGE_CURVE('',#28014,#28022,#28024,.T.); +#28022 = VERTEX_POINT('',#28023); +#28023 = CARTESIAN_POINT('',(0.1,-35.86,7.4)); +#28024 = LINE('',#28025,#28026); +#28025 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#28026 = VECTOR('',#28027,1.); +#28027 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28028 = ORIENTED_EDGE('',*,*,#28029,.T.); +#28029 = EDGE_CURVE('',#28022,#28030,#28032,.T.); +#28030 = VERTEX_POINT('',#28031); +#28031 = CARTESIAN_POINT('',(0.1,-35.86,0.9)); +#28032 = LINE('',#28033,#28034); +#28033 = CARTESIAN_POINT('',(0.1,-35.86,6.055738799212)); +#28034 = VECTOR('',#28035,1.); +#28035 = DIRECTION('',(-0.,0.,-1.)); +#28036 = ORIENTED_EDGE('',*,*,#28037,.T.); +#28037 = EDGE_CURVE('',#28030,#27893,#28038,.T.); +#28038 = LINE('',#28039,#28040); +#28039 = CARTESIAN_POINT('',(-0.3,-35.86,0.9)); +#28040 = VECTOR('',#28041,1.); +#28041 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28042 = ORIENTED_EDGE('',*,*,#27892,.F.); +#28043 = PLANE('',#28044); +#28044 = AXIS2_PLACEMENT_3D('',#28045,#28046,#28047); +#28045 = CARTESIAN_POINT('',(-0.3,-35.86,8.2)); +#28046 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28047 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28048 = ADVANCED_FACE('',(#28049),#28074,.F.); +#28049 = FACE_BOUND('',#28050,.F.); +#28050 = EDGE_LOOP('',(#28051,#28059,#28067,#28073)); +#28051 = ORIENTED_EDGE('',*,*,#28052,.T.); +#28052 = EDGE_CURVE('',#23189,#28053,#28055,.T.); +#28053 = VERTEX_POINT('',#28054); +#28054 = CARTESIAN_POINT('',(0.3,-33.32,0.9)); +#28055 = LINE('',#28056,#28057); +#28056 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#28057 = VECTOR('',#28058,1.); +#28058 = DIRECTION('',(0.,-0.,-1.)); +#28059 = ORIENTED_EDGE('',*,*,#28060,.T.); +#28060 = EDGE_CURVE('',#28053,#28061,#28063,.T.); +#28061 = VERTEX_POINT('',#28062); +#28062 = CARTESIAN_POINT('',(0.3,-32.72,0.9)); +#28063 = LINE('',#28064,#28065); +#28064 = CARTESIAN_POINT('',(0.3,-33.32,0.9)); +#28065 = VECTOR('',#28066,1.); +#28066 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28067 = ORIENTED_EDGE('',*,*,#28068,.F.); +#28068 = EDGE_CURVE('',#23198,#28061,#28069,.T.); +#28069 = LINE('',#28070,#28071); +#28070 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#28071 = VECTOR('',#28072,1.); +#28072 = DIRECTION('',(0.,-0.,-1.)); +#28073 = ORIENTED_EDGE('',*,*,#23205,.F.); +#28074 = PLANE('',#28075); +#28075 = AXIS2_PLACEMENT_3D('',#28076,#28077,#28078); +#28076 = CARTESIAN_POINT('',(0.3,-33.32,8.2)); +#28077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28078 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28079 = ADVANCED_FACE('',(#28080),#28130,.F.); +#28080 = FACE_BOUND('',#28081,.F.); +#28081 = EDGE_LOOP('',(#28082,#28083,#28084,#28092,#28100,#28108,#28116, + #28124)); +#28082 = ORIENTED_EDGE('',*,*,#23229,.F.); +#28083 = ORIENTED_EDGE('',*,*,#28068,.T.); +#28084 = ORIENTED_EDGE('',*,*,#28085,.T.); +#28085 = EDGE_CURVE('',#28061,#28086,#28088,.T.); +#28086 = VERTEX_POINT('',#28087); +#28087 = CARTESIAN_POINT('',(0.1,-32.72,0.9)); +#28088 = LINE('',#28089,#28090); +#28089 = CARTESIAN_POINT('',(0.3,-32.72,0.9)); +#28090 = VECTOR('',#28091,1.); +#28091 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28092 = ORIENTED_EDGE('',*,*,#28093,.T.); +#28093 = EDGE_CURVE('',#28086,#28094,#28096,.T.); +#28094 = VERTEX_POINT('',#28095); +#28095 = CARTESIAN_POINT('',(0.1,-32.72,7.4)); +#28096 = LINE('',#28097,#28098); +#28097 = CARTESIAN_POINT('',(0.1,-32.72,6.055738799212)); +#28098 = VECTOR('',#28099,1.); +#28099 = DIRECTION('',(0.,-0.,1.)); +#28100 = ORIENTED_EDGE('',*,*,#28101,.F.); +#28101 = EDGE_CURVE('',#28102,#28094,#28104,.T.); +#28102 = VERTEX_POINT('',#28103); +#28103 = CARTESIAN_POINT('',(-0.1,-32.72,7.4)); +#28104 = LINE('',#28105,#28106); +#28105 = CARTESIAN_POINT('',(-0.1,-32.72,7.4)); +#28106 = VECTOR('',#28107,1.); +#28107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28108 = ORIENTED_EDGE('',*,*,#28109,.F.); +#28109 = EDGE_CURVE('',#28110,#28102,#28112,.T.); +#28110 = VERTEX_POINT('',#28111); +#28111 = CARTESIAN_POINT('',(-0.1,-32.72,0.9)); +#28112 = LINE('',#28113,#28114); +#28113 = CARTESIAN_POINT('',(-0.1,-32.72,6.055738799212)); +#28114 = VECTOR('',#28115,1.); +#28115 = DIRECTION('',(0.,-0.,1.)); +#28116 = ORIENTED_EDGE('',*,*,#28117,.T.); +#28117 = EDGE_CURVE('',#28110,#28118,#28120,.T.); +#28118 = VERTEX_POINT('',#28119); +#28119 = CARTESIAN_POINT('',(-0.3,-32.72,0.9)); +#28120 = LINE('',#28121,#28122); +#28121 = CARTESIAN_POINT('',(0.3,-32.72,0.9)); +#28122 = VECTOR('',#28123,1.); +#28123 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28124 = ORIENTED_EDGE('',*,*,#28125,.F.); +#28125 = EDGE_CURVE('',#23222,#28118,#28126,.T.); +#28126 = LINE('',#28127,#28128); +#28127 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#28128 = VECTOR('',#28129,1.); +#28129 = DIRECTION('',(0.,-0.,-1.)); +#28130 = PLANE('',#28131); +#28131 = AXIS2_PLACEMENT_3D('',#28132,#28133,#28134); +#28132 = CARTESIAN_POINT('',(0.3,-32.72,8.2)); +#28133 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28134 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28135 = ADVANCED_FACE('',(#28136),#28154,.F.); +#28136 = FACE_BOUND('',#28137,.F.); +#28137 = EDGE_LOOP('',(#28138,#28139,#28147,#28153)); +#28138 = ORIENTED_EDGE('',*,*,#28125,.T.); +#28139 = ORIENTED_EDGE('',*,*,#28140,.T.); +#28140 = EDGE_CURVE('',#28118,#28141,#28143,.T.); +#28141 = VERTEX_POINT('',#28142); +#28142 = CARTESIAN_POINT('',(-0.3,-33.32,0.9)); +#28143 = LINE('',#28144,#28145); +#28144 = CARTESIAN_POINT('',(-0.3,-32.72,0.9)); +#28145 = VECTOR('',#28146,1.); +#28146 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28147 = ORIENTED_EDGE('',*,*,#28148,.F.); +#28148 = EDGE_CURVE('',#23246,#28141,#28149,.T.); +#28149 = LINE('',#28150,#28151); +#28150 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#28151 = VECTOR('',#28152,1.); +#28152 = DIRECTION('',(0.,-0.,-1.)); +#28153 = ORIENTED_EDGE('',*,*,#23253,.F.); +#28154 = PLANE('',#28155); +#28155 = AXIS2_PLACEMENT_3D('',#28156,#28157,#28158); +#28156 = CARTESIAN_POINT('',(-0.3,-32.72,8.2)); +#28157 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28158 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28159 = ADVANCED_FACE('',(#28160),#28203,.F.); +#28160 = FACE_BOUND('',#28161,.F.); +#28161 = EDGE_LOOP('',(#28162,#28163,#28164,#28172,#28180,#28188,#28196, + #28202)); +#28162 = ORIENTED_EDGE('',*,*,#23270,.F.); +#28163 = ORIENTED_EDGE('',*,*,#28148,.T.); +#28164 = ORIENTED_EDGE('',*,*,#28165,.T.); +#28165 = EDGE_CURVE('',#28141,#28166,#28168,.T.); +#28166 = VERTEX_POINT('',#28167); +#28167 = CARTESIAN_POINT('',(-0.1,-33.32,0.9)); +#28168 = LINE('',#28169,#28170); +#28169 = CARTESIAN_POINT('',(-0.3,-33.32,0.9)); +#28170 = VECTOR('',#28171,1.); +#28171 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28172 = ORIENTED_EDGE('',*,*,#28173,.F.); +#28173 = EDGE_CURVE('',#28174,#28166,#28176,.T.); +#28174 = VERTEX_POINT('',#28175); +#28175 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#28176 = LINE('',#28177,#28178); +#28177 = CARTESIAN_POINT('',(-0.1,-33.32,6.055738799212)); +#28178 = VECTOR('',#28179,1.); +#28179 = DIRECTION('',(-0.,0.,-1.)); +#28180 = ORIENTED_EDGE('',*,*,#28181,.T.); +#28181 = EDGE_CURVE('',#28174,#28182,#28184,.T.); +#28182 = VERTEX_POINT('',#28183); +#28183 = CARTESIAN_POINT('',(0.1,-33.32,7.4)); +#28184 = LINE('',#28185,#28186); +#28185 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#28186 = VECTOR('',#28187,1.); +#28187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28188 = ORIENTED_EDGE('',*,*,#28189,.T.); +#28189 = EDGE_CURVE('',#28182,#28190,#28192,.T.); +#28190 = VERTEX_POINT('',#28191); +#28191 = CARTESIAN_POINT('',(0.1,-33.32,0.9)); +#28192 = LINE('',#28193,#28194); +#28193 = CARTESIAN_POINT('',(0.1,-33.32,6.055738799212)); +#28194 = VECTOR('',#28195,1.); +#28195 = DIRECTION('',(-0.,0.,-1.)); +#28196 = ORIENTED_EDGE('',*,*,#28197,.T.); +#28197 = EDGE_CURVE('',#28190,#28053,#28198,.T.); +#28198 = LINE('',#28199,#28200); +#28199 = CARTESIAN_POINT('',(-0.3,-33.32,0.9)); +#28200 = VECTOR('',#28201,1.); +#28201 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28202 = ORIENTED_EDGE('',*,*,#28052,.F.); +#28203 = PLANE('',#28204); +#28204 = AXIS2_PLACEMENT_3D('',#28205,#28206,#28207); +#28205 = CARTESIAN_POINT('',(-0.3,-33.32,8.2)); +#28206 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28207 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28208 = ADVANCED_FACE('',(#28209),#28234,.F.); +#28209 = FACE_BOUND('',#28210,.F.); +#28210 = EDGE_LOOP('',(#28211,#28219,#28227,#28233)); +#28211 = ORIENTED_EDGE('',*,*,#28212,.T.); +#28212 = EDGE_CURVE('',#23285,#28213,#28215,.T.); +#28213 = VERTEX_POINT('',#28214); +#28214 = CARTESIAN_POINT('',(0.3,-30.78,0.9)); +#28215 = LINE('',#28216,#28217); +#28216 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#28217 = VECTOR('',#28218,1.); +#28218 = DIRECTION('',(0.,-0.,-1.)); +#28219 = ORIENTED_EDGE('',*,*,#28220,.T.); +#28220 = EDGE_CURVE('',#28213,#28221,#28223,.T.); +#28221 = VERTEX_POINT('',#28222); +#28222 = CARTESIAN_POINT('',(0.3,-30.18,0.9)); +#28223 = LINE('',#28224,#28225); +#28224 = CARTESIAN_POINT('',(0.3,-30.78,0.9)); +#28225 = VECTOR('',#28226,1.); +#28226 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28227 = ORIENTED_EDGE('',*,*,#28228,.F.); +#28228 = EDGE_CURVE('',#23294,#28221,#28229,.T.); +#28229 = LINE('',#28230,#28231); +#28230 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#28231 = VECTOR('',#28232,1.); +#28232 = DIRECTION('',(0.,-0.,-1.)); +#28233 = ORIENTED_EDGE('',*,*,#23301,.F.); +#28234 = PLANE('',#28235); +#28235 = AXIS2_PLACEMENT_3D('',#28236,#28237,#28238); +#28236 = CARTESIAN_POINT('',(0.3,-30.78,8.2)); +#28237 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28238 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28239 = ADVANCED_FACE('',(#28240),#28290,.F.); +#28240 = FACE_BOUND('',#28241,.F.); +#28241 = EDGE_LOOP('',(#28242,#28243,#28244,#28252,#28260,#28268,#28276, + #28284)); +#28242 = ORIENTED_EDGE('',*,*,#23325,.F.); +#28243 = ORIENTED_EDGE('',*,*,#28228,.T.); +#28244 = ORIENTED_EDGE('',*,*,#28245,.T.); +#28245 = EDGE_CURVE('',#28221,#28246,#28248,.T.); +#28246 = VERTEX_POINT('',#28247); +#28247 = CARTESIAN_POINT('',(0.1,-30.18,0.9)); +#28248 = LINE('',#28249,#28250); +#28249 = CARTESIAN_POINT('',(0.3,-30.18,0.9)); +#28250 = VECTOR('',#28251,1.); +#28251 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28252 = ORIENTED_EDGE('',*,*,#28253,.T.); +#28253 = EDGE_CURVE('',#28246,#28254,#28256,.T.); +#28254 = VERTEX_POINT('',#28255); +#28255 = CARTESIAN_POINT('',(0.1,-30.18,7.4)); +#28256 = LINE('',#28257,#28258); +#28257 = CARTESIAN_POINT('',(0.1,-30.18,6.055738799212)); +#28258 = VECTOR('',#28259,1.); +#28259 = DIRECTION('',(0.,-0.,1.)); +#28260 = ORIENTED_EDGE('',*,*,#28261,.F.); +#28261 = EDGE_CURVE('',#28262,#28254,#28264,.T.); +#28262 = VERTEX_POINT('',#28263); +#28263 = CARTESIAN_POINT('',(-0.1,-30.18,7.4)); +#28264 = LINE('',#28265,#28266); +#28265 = CARTESIAN_POINT('',(-0.1,-30.18,7.4)); +#28266 = VECTOR('',#28267,1.); +#28267 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28268 = ORIENTED_EDGE('',*,*,#28269,.F.); +#28269 = EDGE_CURVE('',#28270,#28262,#28272,.T.); +#28270 = VERTEX_POINT('',#28271); +#28271 = CARTESIAN_POINT('',(-0.1,-30.18,0.9)); +#28272 = LINE('',#28273,#28274); +#28273 = CARTESIAN_POINT('',(-0.1,-30.18,6.055738799212)); +#28274 = VECTOR('',#28275,1.); +#28275 = DIRECTION('',(0.,-0.,1.)); +#28276 = ORIENTED_EDGE('',*,*,#28277,.T.); +#28277 = EDGE_CURVE('',#28270,#28278,#28280,.T.); +#28278 = VERTEX_POINT('',#28279); +#28279 = CARTESIAN_POINT('',(-0.3,-30.18,0.9)); +#28280 = LINE('',#28281,#28282); +#28281 = CARTESIAN_POINT('',(0.3,-30.18,0.9)); +#28282 = VECTOR('',#28283,1.); +#28283 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28284 = ORIENTED_EDGE('',*,*,#28285,.F.); +#28285 = EDGE_CURVE('',#23318,#28278,#28286,.T.); +#28286 = LINE('',#28287,#28288); +#28287 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#28288 = VECTOR('',#28289,1.); +#28289 = DIRECTION('',(0.,-0.,-1.)); +#28290 = PLANE('',#28291); +#28291 = AXIS2_PLACEMENT_3D('',#28292,#28293,#28294); +#28292 = CARTESIAN_POINT('',(0.3,-30.18,8.2)); +#28293 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28294 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28295 = ADVANCED_FACE('',(#28296),#28314,.F.); +#28296 = FACE_BOUND('',#28297,.F.); +#28297 = EDGE_LOOP('',(#28298,#28299,#28307,#28313)); +#28298 = ORIENTED_EDGE('',*,*,#28285,.T.); +#28299 = ORIENTED_EDGE('',*,*,#28300,.T.); +#28300 = EDGE_CURVE('',#28278,#28301,#28303,.T.); +#28301 = VERTEX_POINT('',#28302); +#28302 = CARTESIAN_POINT('',(-0.3,-30.78,0.9)); +#28303 = LINE('',#28304,#28305); +#28304 = CARTESIAN_POINT('',(-0.3,-30.18,0.9)); +#28305 = VECTOR('',#28306,1.); +#28306 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28307 = ORIENTED_EDGE('',*,*,#28308,.F.); +#28308 = EDGE_CURVE('',#23342,#28301,#28309,.T.); +#28309 = LINE('',#28310,#28311); +#28310 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#28311 = VECTOR('',#28312,1.); +#28312 = DIRECTION('',(0.,-0.,-1.)); +#28313 = ORIENTED_EDGE('',*,*,#23349,.F.); +#28314 = PLANE('',#28315); +#28315 = AXIS2_PLACEMENT_3D('',#28316,#28317,#28318); +#28316 = CARTESIAN_POINT('',(-0.3,-30.18,8.2)); +#28317 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28318 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28319 = ADVANCED_FACE('',(#28320),#28363,.F.); +#28320 = FACE_BOUND('',#28321,.F.); +#28321 = EDGE_LOOP('',(#28322,#28323,#28324,#28332,#28340,#28348,#28356, + #28362)); +#28322 = ORIENTED_EDGE('',*,*,#23366,.F.); +#28323 = ORIENTED_EDGE('',*,*,#28308,.T.); +#28324 = ORIENTED_EDGE('',*,*,#28325,.T.); +#28325 = EDGE_CURVE('',#28301,#28326,#28328,.T.); +#28326 = VERTEX_POINT('',#28327); +#28327 = CARTESIAN_POINT('',(-0.1,-30.78,0.9)); +#28328 = LINE('',#28329,#28330); +#28329 = CARTESIAN_POINT('',(-0.3,-30.78,0.9)); +#28330 = VECTOR('',#28331,1.); +#28331 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28332 = ORIENTED_EDGE('',*,*,#28333,.F.); +#28333 = EDGE_CURVE('',#28334,#28326,#28336,.T.); +#28334 = VERTEX_POINT('',#28335); +#28335 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#28336 = LINE('',#28337,#28338); +#28337 = CARTESIAN_POINT('',(-0.1,-30.78,6.055738799212)); +#28338 = VECTOR('',#28339,1.); +#28339 = DIRECTION('',(-0.,0.,-1.)); +#28340 = ORIENTED_EDGE('',*,*,#28341,.T.); +#28341 = EDGE_CURVE('',#28334,#28342,#28344,.T.); +#28342 = VERTEX_POINT('',#28343); +#28343 = CARTESIAN_POINT('',(0.1,-30.78,7.4)); +#28344 = LINE('',#28345,#28346); +#28345 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#28346 = VECTOR('',#28347,1.); +#28347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28348 = ORIENTED_EDGE('',*,*,#28349,.T.); +#28349 = EDGE_CURVE('',#28342,#28350,#28352,.T.); +#28350 = VERTEX_POINT('',#28351); +#28351 = CARTESIAN_POINT('',(0.1,-30.78,0.9)); +#28352 = LINE('',#28353,#28354); +#28353 = CARTESIAN_POINT('',(0.1,-30.78,6.055738799212)); +#28354 = VECTOR('',#28355,1.); +#28355 = DIRECTION('',(-0.,0.,-1.)); +#28356 = ORIENTED_EDGE('',*,*,#28357,.T.); +#28357 = EDGE_CURVE('',#28350,#28213,#28358,.T.); +#28358 = LINE('',#28359,#28360); +#28359 = CARTESIAN_POINT('',(-0.3,-30.78,0.9)); +#28360 = VECTOR('',#28361,1.); +#28361 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28362 = ORIENTED_EDGE('',*,*,#28212,.F.); +#28363 = PLANE('',#28364); +#28364 = AXIS2_PLACEMENT_3D('',#28365,#28366,#28367); +#28365 = CARTESIAN_POINT('',(-0.3,-30.78,8.2)); +#28366 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28367 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28368 = ADVANCED_FACE('',(#28369),#28394,.F.); +#28369 = FACE_BOUND('',#28370,.F.); +#28370 = EDGE_LOOP('',(#28371,#28379,#28387,#28393)); +#28371 = ORIENTED_EDGE('',*,*,#28372,.T.); +#28372 = EDGE_CURVE('',#23381,#28373,#28375,.T.); +#28373 = VERTEX_POINT('',#28374); +#28374 = CARTESIAN_POINT('',(0.3,-28.24,0.9)); +#28375 = LINE('',#28376,#28377); +#28376 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#28377 = VECTOR('',#28378,1.); +#28378 = DIRECTION('',(0.,-0.,-1.)); +#28379 = ORIENTED_EDGE('',*,*,#28380,.T.); +#28380 = EDGE_CURVE('',#28373,#28381,#28383,.T.); +#28381 = VERTEX_POINT('',#28382); +#28382 = CARTESIAN_POINT('',(0.3,-27.64,0.9)); +#28383 = LINE('',#28384,#28385); +#28384 = CARTESIAN_POINT('',(0.3,-28.24,0.9)); +#28385 = VECTOR('',#28386,1.); +#28386 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28387 = ORIENTED_EDGE('',*,*,#28388,.F.); +#28388 = EDGE_CURVE('',#23390,#28381,#28389,.T.); +#28389 = LINE('',#28390,#28391); +#28390 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#28391 = VECTOR('',#28392,1.); +#28392 = DIRECTION('',(0.,-0.,-1.)); +#28393 = ORIENTED_EDGE('',*,*,#23397,.F.); +#28394 = PLANE('',#28395); +#28395 = AXIS2_PLACEMENT_3D('',#28396,#28397,#28398); +#28396 = CARTESIAN_POINT('',(0.3,-28.24,8.2)); +#28397 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28398 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28399 = ADVANCED_FACE('',(#28400),#28450,.F.); +#28400 = FACE_BOUND('',#28401,.F.); +#28401 = EDGE_LOOP('',(#28402,#28403,#28404,#28412,#28420,#28428,#28436, + #28444)); +#28402 = ORIENTED_EDGE('',*,*,#23421,.F.); +#28403 = ORIENTED_EDGE('',*,*,#28388,.T.); +#28404 = ORIENTED_EDGE('',*,*,#28405,.T.); +#28405 = EDGE_CURVE('',#28381,#28406,#28408,.T.); +#28406 = VERTEX_POINT('',#28407); +#28407 = CARTESIAN_POINT('',(0.1,-27.64,0.9)); +#28408 = LINE('',#28409,#28410); +#28409 = CARTESIAN_POINT('',(0.3,-27.64,0.9)); +#28410 = VECTOR('',#28411,1.); +#28411 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28412 = ORIENTED_EDGE('',*,*,#28413,.T.); +#28413 = EDGE_CURVE('',#28406,#28414,#28416,.T.); +#28414 = VERTEX_POINT('',#28415); +#28415 = CARTESIAN_POINT('',(0.1,-27.64,7.4)); +#28416 = LINE('',#28417,#28418); +#28417 = CARTESIAN_POINT('',(0.1,-27.64,6.055738799212)); +#28418 = VECTOR('',#28419,1.); +#28419 = DIRECTION('',(0.,-0.,1.)); +#28420 = ORIENTED_EDGE('',*,*,#28421,.F.); +#28421 = EDGE_CURVE('',#28422,#28414,#28424,.T.); +#28422 = VERTEX_POINT('',#28423); +#28423 = CARTESIAN_POINT('',(-0.1,-27.64,7.4)); +#28424 = LINE('',#28425,#28426); +#28425 = CARTESIAN_POINT('',(-0.1,-27.64,7.4)); +#28426 = VECTOR('',#28427,1.); +#28427 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28428 = ORIENTED_EDGE('',*,*,#28429,.F.); +#28429 = EDGE_CURVE('',#28430,#28422,#28432,.T.); +#28430 = VERTEX_POINT('',#28431); +#28431 = CARTESIAN_POINT('',(-0.1,-27.64,0.9)); +#28432 = LINE('',#28433,#28434); +#28433 = CARTESIAN_POINT('',(-0.1,-27.64,6.055738799212)); +#28434 = VECTOR('',#28435,1.); +#28435 = DIRECTION('',(0.,-0.,1.)); +#28436 = ORIENTED_EDGE('',*,*,#28437,.T.); +#28437 = EDGE_CURVE('',#28430,#28438,#28440,.T.); +#28438 = VERTEX_POINT('',#28439); +#28439 = CARTESIAN_POINT('',(-0.3,-27.64,0.9)); +#28440 = LINE('',#28441,#28442); +#28441 = CARTESIAN_POINT('',(0.3,-27.64,0.9)); +#28442 = VECTOR('',#28443,1.); +#28443 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28444 = ORIENTED_EDGE('',*,*,#28445,.F.); +#28445 = EDGE_CURVE('',#23414,#28438,#28446,.T.); +#28446 = LINE('',#28447,#28448); +#28447 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#28448 = VECTOR('',#28449,1.); +#28449 = DIRECTION('',(0.,-0.,-1.)); +#28450 = PLANE('',#28451); +#28451 = AXIS2_PLACEMENT_3D('',#28452,#28453,#28454); +#28452 = CARTESIAN_POINT('',(0.3,-27.64,8.2)); +#28453 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28454 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28455 = ADVANCED_FACE('',(#28456),#28474,.F.); +#28456 = FACE_BOUND('',#28457,.F.); +#28457 = EDGE_LOOP('',(#28458,#28459,#28467,#28473)); +#28458 = ORIENTED_EDGE('',*,*,#28445,.T.); +#28459 = ORIENTED_EDGE('',*,*,#28460,.T.); +#28460 = EDGE_CURVE('',#28438,#28461,#28463,.T.); +#28461 = VERTEX_POINT('',#28462); +#28462 = CARTESIAN_POINT('',(-0.3,-28.24,0.9)); +#28463 = LINE('',#28464,#28465); +#28464 = CARTESIAN_POINT('',(-0.3,-27.64,0.9)); +#28465 = VECTOR('',#28466,1.); +#28466 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28467 = ORIENTED_EDGE('',*,*,#28468,.F.); +#28468 = EDGE_CURVE('',#23438,#28461,#28469,.T.); +#28469 = LINE('',#28470,#28471); +#28470 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#28471 = VECTOR('',#28472,1.); +#28472 = DIRECTION('',(0.,-0.,-1.)); +#28473 = ORIENTED_EDGE('',*,*,#23445,.F.); +#28474 = PLANE('',#28475); +#28475 = AXIS2_PLACEMENT_3D('',#28476,#28477,#28478); +#28476 = CARTESIAN_POINT('',(-0.3,-27.64,8.2)); +#28477 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28478 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28479 = ADVANCED_FACE('',(#28480),#28523,.F.); +#28480 = FACE_BOUND('',#28481,.F.); +#28481 = EDGE_LOOP('',(#28482,#28483,#28484,#28492,#28500,#28508,#28516, + #28522)); +#28482 = ORIENTED_EDGE('',*,*,#23462,.F.); +#28483 = ORIENTED_EDGE('',*,*,#28468,.T.); +#28484 = ORIENTED_EDGE('',*,*,#28485,.T.); +#28485 = EDGE_CURVE('',#28461,#28486,#28488,.T.); +#28486 = VERTEX_POINT('',#28487); +#28487 = CARTESIAN_POINT('',(-0.1,-28.24,0.9)); +#28488 = LINE('',#28489,#28490); +#28489 = CARTESIAN_POINT('',(-0.3,-28.24,0.9)); +#28490 = VECTOR('',#28491,1.); +#28491 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28492 = ORIENTED_EDGE('',*,*,#28493,.F.); +#28493 = EDGE_CURVE('',#28494,#28486,#28496,.T.); +#28494 = VERTEX_POINT('',#28495); +#28495 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#28496 = LINE('',#28497,#28498); +#28497 = CARTESIAN_POINT('',(-0.1,-28.24,6.055738799212)); +#28498 = VECTOR('',#28499,1.); +#28499 = DIRECTION('',(-0.,0.,-1.)); +#28500 = ORIENTED_EDGE('',*,*,#28501,.T.); +#28501 = EDGE_CURVE('',#28494,#28502,#28504,.T.); +#28502 = VERTEX_POINT('',#28503); +#28503 = CARTESIAN_POINT('',(0.1,-28.24,7.4)); +#28504 = LINE('',#28505,#28506); +#28505 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#28506 = VECTOR('',#28507,1.); +#28507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28508 = ORIENTED_EDGE('',*,*,#28509,.T.); +#28509 = EDGE_CURVE('',#28502,#28510,#28512,.T.); +#28510 = VERTEX_POINT('',#28511); +#28511 = CARTESIAN_POINT('',(0.1,-28.24,0.9)); +#28512 = LINE('',#28513,#28514); +#28513 = CARTESIAN_POINT('',(0.1,-28.24,6.055738799212)); +#28514 = VECTOR('',#28515,1.); +#28515 = DIRECTION('',(-0.,0.,-1.)); +#28516 = ORIENTED_EDGE('',*,*,#28517,.T.); +#28517 = EDGE_CURVE('',#28510,#28373,#28518,.T.); +#28518 = LINE('',#28519,#28520); +#28519 = CARTESIAN_POINT('',(-0.3,-28.24,0.9)); +#28520 = VECTOR('',#28521,1.); +#28521 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28522 = ORIENTED_EDGE('',*,*,#28372,.F.); +#28523 = PLANE('',#28524); +#28524 = AXIS2_PLACEMENT_3D('',#28525,#28526,#28527); +#28525 = CARTESIAN_POINT('',(-0.3,-28.24,8.2)); +#28526 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28527 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28528 = ADVANCED_FACE('',(#28529),#28554,.F.); +#28529 = FACE_BOUND('',#28530,.F.); +#28530 = EDGE_LOOP('',(#28531,#28539,#28547,#28553)); +#28531 = ORIENTED_EDGE('',*,*,#28532,.T.); +#28532 = EDGE_CURVE('',#23477,#28533,#28535,.T.); +#28533 = VERTEX_POINT('',#28534); +#28534 = CARTESIAN_POINT('',(0.3,-25.7,0.9)); +#28535 = LINE('',#28536,#28537); +#28536 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#28537 = VECTOR('',#28538,1.); +#28538 = DIRECTION('',(0.,-0.,-1.)); +#28539 = ORIENTED_EDGE('',*,*,#28540,.T.); +#28540 = EDGE_CURVE('',#28533,#28541,#28543,.T.); +#28541 = VERTEX_POINT('',#28542); +#28542 = CARTESIAN_POINT('',(0.3,-25.1,0.9)); +#28543 = LINE('',#28544,#28545); +#28544 = CARTESIAN_POINT('',(0.3,-25.7,0.9)); +#28545 = VECTOR('',#28546,1.); +#28546 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28547 = ORIENTED_EDGE('',*,*,#28548,.F.); +#28548 = EDGE_CURVE('',#23486,#28541,#28549,.T.); +#28549 = LINE('',#28550,#28551); +#28550 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#28551 = VECTOR('',#28552,1.); +#28552 = DIRECTION('',(0.,-0.,-1.)); +#28553 = ORIENTED_EDGE('',*,*,#23493,.F.); +#28554 = PLANE('',#28555); +#28555 = AXIS2_PLACEMENT_3D('',#28556,#28557,#28558); +#28556 = CARTESIAN_POINT('',(0.3,-25.7,8.2)); +#28557 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28558 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28559 = ADVANCED_FACE('',(#28560),#28610,.F.); +#28560 = FACE_BOUND('',#28561,.F.); +#28561 = EDGE_LOOP('',(#28562,#28563,#28564,#28572,#28580,#28588,#28596, + #28604)); +#28562 = ORIENTED_EDGE('',*,*,#23517,.F.); +#28563 = ORIENTED_EDGE('',*,*,#28548,.T.); +#28564 = ORIENTED_EDGE('',*,*,#28565,.T.); +#28565 = EDGE_CURVE('',#28541,#28566,#28568,.T.); +#28566 = VERTEX_POINT('',#28567); +#28567 = CARTESIAN_POINT('',(0.1,-25.1,0.9)); +#28568 = LINE('',#28569,#28570); +#28569 = CARTESIAN_POINT('',(0.3,-25.1,0.9)); +#28570 = VECTOR('',#28571,1.); +#28571 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28572 = ORIENTED_EDGE('',*,*,#28573,.T.); +#28573 = EDGE_CURVE('',#28566,#28574,#28576,.T.); +#28574 = VERTEX_POINT('',#28575); +#28575 = CARTESIAN_POINT('',(0.1,-25.1,7.4)); +#28576 = LINE('',#28577,#28578); +#28577 = CARTESIAN_POINT('',(0.1,-25.1,6.055738799212)); +#28578 = VECTOR('',#28579,1.); +#28579 = DIRECTION('',(0.,-0.,1.)); +#28580 = ORIENTED_EDGE('',*,*,#28581,.F.); +#28581 = EDGE_CURVE('',#28582,#28574,#28584,.T.); +#28582 = VERTEX_POINT('',#28583); +#28583 = CARTESIAN_POINT('',(-0.1,-25.1,7.4)); +#28584 = LINE('',#28585,#28586); +#28585 = CARTESIAN_POINT('',(-0.1,-25.1,7.4)); +#28586 = VECTOR('',#28587,1.); +#28587 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28588 = ORIENTED_EDGE('',*,*,#28589,.F.); +#28589 = EDGE_CURVE('',#28590,#28582,#28592,.T.); +#28590 = VERTEX_POINT('',#28591); +#28591 = CARTESIAN_POINT('',(-0.1,-25.1,0.9)); +#28592 = LINE('',#28593,#28594); +#28593 = CARTESIAN_POINT('',(-0.1,-25.1,6.055738799212)); +#28594 = VECTOR('',#28595,1.); +#28595 = DIRECTION('',(0.,-0.,1.)); +#28596 = ORIENTED_EDGE('',*,*,#28597,.T.); +#28597 = EDGE_CURVE('',#28590,#28598,#28600,.T.); +#28598 = VERTEX_POINT('',#28599); +#28599 = CARTESIAN_POINT('',(-0.3,-25.1,0.9)); +#28600 = LINE('',#28601,#28602); +#28601 = CARTESIAN_POINT('',(0.3,-25.1,0.9)); +#28602 = VECTOR('',#28603,1.); +#28603 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28604 = ORIENTED_EDGE('',*,*,#28605,.F.); +#28605 = EDGE_CURVE('',#23510,#28598,#28606,.T.); +#28606 = LINE('',#28607,#28608); +#28607 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#28608 = VECTOR('',#28609,1.); +#28609 = DIRECTION('',(0.,-0.,-1.)); +#28610 = PLANE('',#28611); +#28611 = AXIS2_PLACEMENT_3D('',#28612,#28613,#28614); +#28612 = CARTESIAN_POINT('',(0.3,-25.1,8.2)); +#28613 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28614 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28615 = ADVANCED_FACE('',(#28616),#28634,.F.); +#28616 = FACE_BOUND('',#28617,.F.); +#28617 = EDGE_LOOP('',(#28618,#28619,#28627,#28633)); +#28618 = ORIENTED_EDGE('',*,*,#28605,.T.); +#28619 = ORIENTED_EDGE('',*,*,#28620,.T.); +#28620 = EDGE_CURVE('',#28598,#28621,#28623,.T.); +#28621 = VERTEX_POINT('',#28622); +#28622 = CARTESIAN_POINT('',(-0.3,-25.7,0.9)); +#28623 = LINE('',#28624,#28625); +#28624 = CARTESIAN_POINT('',(-0.3,-25.1,0.9)); +#28625 = VECTOR('',#28626,1.); +#28626 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28627 = ORIENTED_EDGE('',*,*,#28628,.F.); +#28628 = EDGE_CURVE('',#23534,#28621,#28629,.T.); +#28629 = LINE('',#28630,#28631); +#28630 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#28631 = VECTOR('',#28632,1.); +#28632 = DIRECTION('',(0.,-0.,-1.)); +#28633 = ORIENTED_EDGE('',*,*,#23541,.F.); +#28634 = PLANE('',#28635); +#28635 = AXIS2_PLACEMENT_3D('',#28636,#28637,#28638); +#28636 = CARTESIAN_POINT('',(-0.3,-25.1,8.2)); +#28637 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28638 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28639 = ADVANCED_FACE('',(#28640),#28683,.F.); +#28640 = FACE_BOUND('',#28641,.F.); +#28641 = EDGE_LOOP('',(#28642,#28643,#28644,#28652,#28660,#28668,#28676, + #28682)); +#28642 = ORIENTED_EDGE('',*,*,#23558,.F.); +#28643 = ORIENTED_EDGE('',*,*,#28628,.T.); +#28644 = ORIENTED_EDGE('',*,*,#28645,.T.); +#28645 = EDGE_CURVE('',#28621,#28646,#28648,.T.); +#28646 = VERTEX_POINT('',#28647); +#28647 = CARTESIAN_POINT('',(-0.1,-25.7,0.9)); +#28648 = LINE('',#28649,#28650); +#28649 = CARTESIAN_POINT('',(-0.3,-25.7,0.9)); +#28650 = VECTOR('',#28651,1.); +#28651 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28652 = ORIENTED_EDGE('',*,*,#28653,.F.); +#28653 = EDGE_CURVE('',#28654,#28646,#28656,.T.); +#28654 = VERTEX_POINT('',#28655); +#28655 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#28656 = LINE('',#28657,#28658); +#28657 = CARTESIAN_POINT('',(-0.1,-25.7,6.055738799212)); +#28658 = VECTOR('',#28659,1.); +#28659 = DIRECTION('',(-0.,0.,-1.)); +#28660 = ORIENTED_EDGE('',*,*,#28661,.T.); +#28661 = EDGE_CURVE('',#28654,#28662,#28664,.T.); +#28662 = VERTEX_POINT('',#28663); +#28663 = CARTESIAN_POINT('',(0.1,-25.7,7.4)); +#28664 = LINE('',#28665,#28666); +#28665 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#28666 = VECTOR('',#28667,1.); +#28667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28668 = ORIENTED_EDGE('',*,*,#28669,.T.); +#28669 = EDGE_CURVE('',#28662,#28670,#28672,.T.); +#28670 = VERTEX_POINT('',#28671); +#28671 = CARTESIAN_POINT('',(0.1,-25.7,0.9)); +#28672 = LINE('',#28673,#28674); +#28673 = CARTESIAN_POINT('',(0.1,-25.7,6.055738799212)); +#28674 = VECTOR('',#28675,1.); +#28675 = DIRECTION('',(-0.,0.,-1.)); +#28676 = ORIENTED_EDGE('',*,*,#28677,.T.); +#28677 = EDGE_CURVE('',#28670,#28533,#28678,.T.); +#28678 = LINE('',#28679,#28680); +#28679 = CARTESIAN_POINT('',(-0.3,-25.7,0.9)); +#28680 = VECTOR('',#28681,1.); +#28681 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28682 = ORIENTED_EDGE('',*,*,#28532,.F.); +#28683 = PLANE('',#28684); +#28684 = AXIS2_PLACEMENT_3D('',#28685,#28686,#28687); +#28685 = CARTESIAN_POINT('',(-0.3,-25.7,8.2)); +#28686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28687 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28688 = ADVANCED_FACE('',(#28689),#28714,.F.); +#28689 = FACE_BOUND('',#28690,.F.); +#28690 = EDGE_LOOP('',(#28691,#28699,#28707,#28713)); +#28691 = ORIENTED_EDGE('',*,*,#28692,.T.); +#28692 = EDGE_CURVE('',#23573,#28693,#28695,.T.); +#28693 = VERTEX_POINT('',#28694); +#28694 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#28695 = LINE('',#28696,#28697); +#28696 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#28697 = VECTOR('',#28698,1.); +#28698 = DIRECTION('',(0.,-0.,-1.)); +#28699 = ORIENTED_EDGE('',*,*,#28700,.T.); +#28700 = EDGE_CURVE('',#28693,#28701,#28703,.T.); +#28701 = VERTEX_POINT('',#28702); +#28702 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#28703 = LINE('',#28704,#28705); +#28704 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#28705 = VECTOR('',#28706,1.); +#28706 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28707 = ORIENTED_EDGE('',*,*,#28708,.F.); +#28708 = EDGE_CURVE('',#23582,#28701,#28709,.T.); +#28709 = LINE('',#28710,#28711); +#28710 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#28711 = VECTOR('',#28712,1.); +#28712 = DIRECTION('',(0.,-0.,-1.)); +#28713 = ORIENTED_EDGE('',*,*,#23589,.F.); +#28714 = PLANE('',#28715); +#28715 = AXIS2_PLACEMENT_3D('',#28716,#28717,#28718); +#28716 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#28717 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28718 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28719 = ADVANCED_FACE('',(#28720),#28770,.F.); +#28720 = FACE_BOUND('',#28721,.F.); +#28721 = EDGE_LOOP('',(#28722,#28723,#28724,#28732,#28740,#28748,#28756, + #28764)); +#28722 = ORIENTED_EDGE('',*,*,#23613,.F.); +#28723 = ORIENTED_EDGE('',*,*,#28708,.T.); +#28724 = ORIENTED_EDGE('',*,*,#28725,.T.); +#28725 = EDGE_CURVE('',#28701,#28726,#28728,.T.); +#28726 = VERTEX_POINT('',#28727); +#28727 = CARTESIAN_POINT('',(0.1,-22.56,0.9)); +#28728 = LINE('',#28729,#28730); +#28729 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#28730 = VECTOR('',#28731,1.); +#28731 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28732 = ORIENTED_EDGE('',*,*,#28733,.T.); +#28733 = EDGE_CURVE('',#28726,#28734,#28736,.T.); +#28734 = VERTEX_POINT('',#28735); +#28735 = CARTESIAN_POINT('',(0.1,-22.56,7.4)); +#28736 = LINE('',#28737,#28738); +#28737 = CARTESIAN_POINT('',(0.1,-22.56,6.055738799212)); +#28738 = VECTOR('',#28739,1.); +#28739 = DIRECTION('',(0.,-0.,1.)); +#28740 = ORIENTED_EDGE('',*,*,#28741,.F.); +#28741 = EDGE_CURVE('',#28742,#28734,#28744,.T.); +#28742 = VERTEX_POINT('',#28743); +#28743 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#28744 = LINE('',#28745,#28746); +#28745 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#28746 = VECTOR('',#28747,1.); +#28747 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28748 = ORIENTED_EDGE('',*,*,#28749,.F.); +#28749 = EDGE_CURVE('',#28750,#28742,#28752,.T.); +#28750 = VERTEX_POINT('',#28751); +#28751 = CARTESIAN_POINT('',(-0.1,-22.56,0.9)); +#28752 = LINE('',#28753,#28754); +#28753 = CARTESIAN_POINT('',(-0.1,-22.56,6.055738799212)); +#28754 = VECTOR('',#28755,1.); +#28755 = DIRECTION('',(0.,-0.,1.)); +#28756 = ORIENTED_EDGE('',*,*,#28757,.T.); +#28757 = EDGE_CURVE('',#28750,#28758,#28760,.T.); +#28758 = VERTEX_POINT('',#28759); +#28759 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#28760 = LINE('',#28761,#28762); +#28761 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#28762 = VECTOR('',#28763,1.); +#28763 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28764 = ORIENTED_EDGE('',*,*,#28765,.F.); +#28765 = EDGE_CURVE('',#23606,#28758,#28766,.T.); +#28766 = LINE('',#28767,#28768); +#28767 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#28768 = VECTOR('',#28769,1.); +#28769 = DIRECTION('',(0.,-0.,-1.)); +#28770 = PLANE('',#28771); +#28771 = AXIS2_PLACEMENT_3D('',#28772,#28773,#28774); +#28772 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#28773 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28774 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28775 = ADVANCED_FACE('',(#28776),#28794,.F.); +#28776 = FACE_BOUND('',#28777,.F.); +#28777 = EDGE_LOOP('',(#28778,#28779,#28787,#28793)); +#28778 = ORIENTED_EDGE('',*,*,#28765,.T.); +#28779 = ORIENTED_EDGE('',*,*,#28780,.T.); +#28780 = EDGE_CURVE('',#28758,#28781,#28783,.T.); +#28781 = VERTEX_POINT('',#28782); +#28782 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#28783 = LINE('',#28784,#28785); +#28784 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#28785 = VECTOR('',#28786,1.); +#28786 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28787 = ORIENTED_EDGE('',*,*,#28788,.F.); +#28788 = EDGE_CURVE('',#23630,#28781,#28789,.T.); +#28789 = LINE('',#28790,#28791); +#28790 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#28791 = VECTOR('',#28792,1.); +#28792 = DIRECTION('',(0.,-0.,-1.)); +#28793 = ORIENTED_EDGE('',*,*,#23637,.F.); +#28794 = PLANE('',#28795); +#28795 = AXIS2_PLACEMENT_3D('',#28796,#28797,#28798); +#28796 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#28797 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28798 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28799 = ADVANCED_FACE('',(#28800),#28843,.F.); +#28800 = FACE_BOUND('',#28801,.F.); +#28801 = EDGE_LOOP('',(#28802,#28803,#28804,#28812,#28820,#28828,#28836, + #28842)); +#28802 = ORIENTED_EDGE('',*,*,#23654,.F.); +#28803 = ORIENTED_EDGE('',*,*,#28788,.T.); +#28804 = ORIENTED_EDGE('',*,*,#28805,.T.); +#28805 = EDGE_CURVE('',#28781,#28806,#28808,.T.); +#28806 = VERTEX_POINT('',#28807); +#28807 = CARTESIAN_POINT('',(-0.1,-23.16,0.9)); +#28808 = LINE('',#28809,#28810); +#28809 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#28810 = VECTOR('',#28811,1.); +#28811 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28812 = ORIENTED_EDGE('',*,*,#28813,.F.); +#28813 = EDGE_CURVE('',#28814,#28806,#28816,.T.); +#28814 = VERTEX_POINT('',#28815); +#28815 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#28816 = LINE('',#28817,#28818); +#28817 = CARTESIAN_POINT('',(-0.1,-23.16,6.055738799212)); +#28818 = VECTOR('',#28819,1.); +#28819 = DIRECTION('',(-0.,0.,-1.)); +#28820 = ORIENTED_EDGE('',*,*,#28821,.T.); +#28821 = EDGE_CURVE('',#28814,#28822,#28824,.T.); +#28822 = VERTEX_POINT('',#28823); +#28823 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#28824 = LINE('',#28825,#28826); +#28825 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#28826 = VECTOR('',#28827,1.); +#28827 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28828 = ORIENTED_EDGE('',*,*,#28829,.T.); +#28829 = EDGE_CURVE('',#28822,#28830,#28832,.T.); +#28830 = VERTEX_POINT('',#28831); +#28831 = CARTESIAN_POINT('',(0.1,-23.16,0.9)); +#28832 = LINE('',#28833,#28834); +#28833 = CARTESIAN_POINT('',(0.1,-23.16,6.055738799212)); +#28834 = VECTOR('',#28835,1.); +#28835 = DIRECTION('',(-0.,0.,-1.)); +#28836 = ORIENTED_EDGE('',*,*,#28837,.T.); +#28837 = EDGE_CURVE('',#28830,#28693,#28838,.T.); +#28838 = LINE('',#28839,#28840); +#28839 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#28840 = VECTOR('',#28841,1.); +#28841 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28842 = ORIENTED_EDGE('',*,*,#28692,.F.); +#28843 = PLANE('',#28844); +#28844 = AXIS2_PLACEMENT_3D('',#28845,#28846,#28847); +#28845 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#28846 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28847 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28848 = ADVANCED_FACE('',(#28849),#28874,.F.); +#28849 = FACE_BOUND('',#28850,.F.); +#28850 = EDGE_LOOP('',(#28851,#28859,#28867,#28873)); +#28851 = ORIENTED_EDGE('',*,*,#28852,.T.); +#28852 = EDGE_CURVE('',#23669,#28853,#28855,.T.); +#28853 = VERTEX_POINT('',#28854); +#28854 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#28855 = LINE('',#28856,#28857); +#28856 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#28857 = VECTOR('',#28858,1.); +#28858 = DIRECTION('',(0.,-0.,-1.)); +#28859 = ORIENTED_EDGE('',*,*,#28860,.T.); +#28860 = EDGE_CURVE('',#28853,#28861,#28863,.T.); +#28861 = VERTEX_POINT('',#28862); +#28862 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#28863 = LINE('',#28864,#28865); +#28864 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#28865 = VECTOR('',#28866,1.); +#28866 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28867 = ORIENTED_EDGE('',*,*,#28868,.F.); +#28868 = EDGE_CURVE('',#23678,#28861,#28869,.T.); +#28869 = LINE('',#28870,#28871); +#28870 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#28871 = VECTOR('',#28872,1.); +#28872 = DIRECTION('',(0.,-0.,-1.)); +#28873 = ORIENTED_EDGE('',*,*,#23685,.F.); +#28874 = PLANE('',#28875); +#28875 = AXIS2_PLACEMENT_3D('',#28876,#28877,#28878); +#28876 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#28877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28878 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28879 = ADVANCED_FACE('',(#28880),#28930,.F.); +#28880 = FACE_BOUND('',#28881,.F.); +#28881 = EDGE_LOOP('',(#28882,#28883,#28884,#28892,#28900,#28908,#28916, + #28924)); +#28882 = ORIENTED_EDGE('',*,*,#23709,.F.); +#28883 = ORIENTED_EDGE('',*,*,#28868,.T.); +#28884 = ORIENTED_EDGE('',*,*,#28885,.T.); +#28885 = EDGE_CURVE('',#28861,#28886,#28888,.T.); +#28886 = VERTEX_POINT('',#28887); +#28887 = CARTESIAN_POINT('',(0.1,-20.02,0.9)); +#28888 = LINE('',#28889,#28890); +#28889 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#28890 = VECTOR('',#28891,1.); +#28891 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28892 = ORIENTED_EDGE('',*,*,#28893,.T.); +#28893 = EDGE_CURVE('',#28886,#28894,#28896,.T.); +#28894 = VERTEX_POINT('',#28895); +#28895 = CARTESIAN_POINT('',(0.1,-20.02,7.4)); +#28896 = LINE('',#28897,#28898); +#28897 = CARTESIAN_POINT('',(0.1,-20.02,6.055738799212)); +#28898 = VECTOR('',#28899,1.); +#28899 = DIRECTION('',(0.,-0.,1.)); +#28900 = ORIENTED_EDGE('',*,*,#28901,.F.); +#28901 = EDGE_CURVE('',#28902,#28894,#28904,.T.); +#28902 = VERTEX_POINT('',#28903); +#28903 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#28904 = LINE('',#28905,#28906); +#28905 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#28906 = VECTOR('',#28907,1.); +#28907 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28908 = ORIENTED_EDGE('',*,*,#28909,.F.); +#28909 = EDGE_CURVE('',#28910,#28902,#28912,.T.); +#28910 = VERTEX_POINT('',#28911); +#28911 = CARTESIAN_POINT('',(-0.1,-20.02,0.9)); +#28912 = LINE('',#28913,#28914); +#28913 = CARTESIAN_POINT('',(-0.1,-20.02,6.055738799212)); +#28914 = VECTOR('',#28915,1.); +#28915 = DIRECTION('',(0.,-0.,1.)); +#28916 = ORIENTED_EDGE('',*,*,#28917,.T.); +#28917 = EDGE_CURVE('',#28910,#28918,#28920,.T.); +#28918 = VERTEX_POINT('',#28919); +#28919 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#28920 = LINE('',#28921,#28922); +#28921 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#28922 = VECTOR('',#28923,1.); +#28923 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28924 = ORIENTED_EDGE('',*,*,#28925,.F.); +#28925 = EDGE_CURVE('',#23702,#28918,#28926,.T.); +#28926 = LINE('',#28927,#28928); +#28927 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#28928 = VECTOR('',#28929,1.); +#28929 = DIRECTION('',(0.,-0.,-1.)); +#28930 = PLANE('',#28931); +#28931 = AXIS2_PLACEMENT_3D('',#28932,#28933,#28934); +#28932 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#28933 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28934 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28935 = ADVANCED_FACE('',(#28936),#28954,.F.); +#28936 = FACE_BOUND('',#28937,.F.); +#28937 = EDGE_LOOP('',(#28938,#28939,#28947,#28953)); +#28938 = ORIENTED_EDGE('',*,*,#28925,.T.); +#28939 = ORIENTED_EDGE('',*,*,#28940,.T.); +#28940 = EDGE_CURVE('',#28918,#28941,#28943,.T.); +#28941 = VERTEX_POINT('',#28942); +#28942 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#28943 = LINE('',#28944,#28945); +#28944 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#28945 = VECTOR('',#28946,1.); +#28946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28947 = ORIENTED_EDGE('',*,*,#28948,.F.); +#28948 = EDGE_CURVE('',#23726,#28941,#28949,.T.); +#28949 = LINE('',#28950,#28951); +#28950 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#28951 = VECTOR('',#28952,1.); +#28952 = DIRECTION('',(0.,-0.,-1.)); +#28953 = ORIENTED_EDGE('',*,*,#23733,.F.); +#28954 = PLANE('',#28955); +#28955 = AXIS2_PLACEMENT_3D('',#28956,#28957,#28958); +#28956 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#28957 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28958 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28959 = ADVANCED_FACE('',(#28960),#29003,.F.); +#28960 = FACE_BOUND('',#28961,.F.); +#28961 = EDGE_LOOP('',(#28962,#28963,#28964,#28972,#28980,#28988,#28996, + #29002)); +#28962 = ORIENTED_EDGE('',*,*,#23750,.F.); +#28963 = ORIENTED_EDGE('',*,*,#28948,.T.); +#28964 = ORIENTED_EDGE('',*,*,#28965,.T.); +#28965 = EDGE_CURVE('',#28941,#28966,#28968,.T.); +#28966 = VERTEX_POINT('',#28967); +#28967 = CARTESIAN_POINT('',(-0.1,-20.62,0.9)); +#28968 = LINE('',#28969,#28970); +#28969 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#28970 = VECTOR('',#28971,1.); +#28971 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28972 = ORIENTED_EDGE('',*,*,#28973,.F.); +#28973 = EDGE_CURVE('',#28974,#28966,#28976,.T.); +#28974 = VERTEX_POINT('',#28975); +#28975 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#28976 = LINE('',#28977,#28978); +#28977 = CARTESIAN_POINT('',(-0.1,-20.62,6.055738799212)); +#28978 = VECTOR('',#28979,1.); +#28979 = DIRECTION('',(-0.,0.,-1.)); +#28980 = ORIENTED_EDGE('',*,*,#28981,.T.); +#28981 = EDGE_CURVE('',#28974,#28982,#28984,.T.); +#28982 = VERTEX_POINT('',#28983); +#28983 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#28984 = LINE('',#28985,#28986); +#28985 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#28986 = VECTOR('',#28987,1.); +#28987 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28988 = ORIENTED_EDGE('',*,*,#28989,.T.); +#28989 = EDGE_CURVE('',#28982,#28990,#28992,.T.); +#28990 = VERTEX_POINT('',#28991); +#28991 = CARTESIAN_POINT('',(0.1,-20.62,0.9)); +#28992 = LINE('',#28993,#28994); +#28993 = CARTESIAN_POINT('',(0.1,-20.62,6.055738799212)); +#28994 = VECTOR('',#28995,1.); +#28995 = DIRECTION('',(-0.,0.,-1.)); +#28996 = ORIENTED_EDGE('',*,*,#28997,.T.); +#28997 = EDGE_CURVE('',#28990,#28853,#28998,.T.); +#28998 = LINE('',#28999,#29000); +#28999 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#29000 = VECTOR('',#29001,1.); +#29001 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29002 = ORIENTED_EDGE('',*,*,#28852,.F.); +#29003 = PLANE('',#29004); +#29004 = AXIS2_PLACEMENT_3D('',#29005,#29006,#29007); +#29005 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#29006 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29007 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29008 = ADVANCED_FACE('',(#29009),#29034,.F.); +#29009 = FACE_BOUND('',#29010,.F.); +#29010 = EDGE_LOOP('',(#29011,#29019,#29027,#29033)); +#29011 = ORIENTED_EDGE('',*,*,#29012,.T.); +#29012 = EDGE_CURVE('',#23765,#29013,#29015,.T.); +#29013 = VERTEX_POINT('',#29014); +#29014 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#29015 = LINE('',#29016,#29017); +#29016 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#29017 = VECTOR('',#29018,1.); +#29018 = DIRECTION('',(0.,-0.,-1.)); +#29019 = ORIENTED_EDGE('',*,*,#29020,.T.); +#29020 = EDGE_CURVE('',#29013,#29021,#29023,.T.); +#29021 = VERTEX_POINT('',#29022); +#29022 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#29023 = LINE('',#29024,#29025); +#29024 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#29025 = VECTOR('',#29026,1.); +#29026 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29027 = ORIENTED_EDGE('',*,*,#29028,.F.); +#29028 = EDGE_CURVE('',#23774,#29021,#29029,.T.); +#29029 = LINE('',#29030,#29031); +#29030 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#29031 = VECTOR('',#29032,1.); +#29032 = DIRECTION('',(0.,-0.,-1.)); +#29033 = ORIENTED_EDGE('',*,*,#23781,.F.); +#29034 = PLANE('',#29035); +#29035 = AXIS2_PLACEMENT_3D('',#29036,#29037,#29038); +#29036 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#29037 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29038 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29039 = ADVANCED_FACE('',(#29040),#29090,.F.); +#29040 = FACE_BOUND('',#29041,.F.); +#29041 = EDGE_LOOP('',(#29042,#29043,#29044,#29052,#29060,#29068,#29076, + #29084)); +#29042 = ORIENTED_EDGE('',*,*,#23805,.F.); +#29043 = ORIENTED_EDGE('',*,*,#29028,.T.); +#29044 = ORIENTED_EDGE('',*,*,#29045,.T.); +#29045 = EDGE_CURVE('',#29021,#29046,#29048,.T.); +#29046 = VERTEX_POINT('',#29047); +#29047 = CARTESIAN_POINT('',(0.1,-17.48,0.9)); +#29048 = LINE('',#29049,#29050); +#29049 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#29050 = VECTOR('',#29051,1.); +#29051 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29052 = ORIENTED_EDGE('',*,*,#29053,.T.); +#29053 = EDGE_CURVE('',#29046,#29054,#29056,.T.); +#29054 = VERTEX_POINT('',#29055); +#29055 = CARTESIAN_POINT('',(0.1,-17.48,7.4)); +#29056 = LINE('',#29057,#29058); +#29057 = CARTESIAN_POINT('',(0.1,-17.48,6.055738799212)); +#29058 = VECTOR('',#29059,1.); +#29059 = DIRECTION('',(0.,-0.,1.)); +#29060 = ORIENTED_EDGE('',*,*,#29061,.F.); +#29061 = EDGE_CURVE('',#29062,#29054,#29064,.T.); +#29062 = VERTEX_POINT('',#29063); +#29063 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#29064 = LINE('',#29065,#29066); +#29065 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#29066 = VECTOR('',#29067,1.); +#29067 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29068 = ORIENTED_EDGE('',*,*,#29069,.F.); +#29069 = EDGE_CURVE('',#29070,#29062,#29072,.T.); +#29070 = VERTEX_POINT('',#29071); +#29071 = CARTESIAN_POINT('',(-0.1,-17.48,0.9)); +#29072 = LINE('',#29073,#29074); +#29073 = CARTESIAN_POINT('',(-0.1,-17.48,6.055738799212)); +#29074 = VECTOR('',#29075,1.); +#29075 = DIRECTION('',(0.,-0.,1.)); +#29076 = ORIENTED_EDGE('',*,*,#29077,.T.); +#29077 = EDGE_CURVE('',#29070,#29078,#29080,.T.); +#29078 = VERTEX_POINT('',#29079); +#29079 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#29080 = LINE('',#29081,#29082); +#29081 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#29082 = VECTOR('',#29083,1.); +#29083 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29084 = ORIENTED_EDGE('',*,*,#29085,.F.); +#29085 = EDGE_CURVE('',#23798,#29078,#29086,.T.); +#29086 = LINE('',#29087,#29088); +#29087 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#29088 = VECTOR('',#29089,1.); +#29089 = DIRECTION('',(0.,-0.,-1.)); +#29090 = PLANE('',#29091); +#29091 = AXIS2_PLACEMENT_3D('',#29092,#29093,#29094); +#29092 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#29093 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29094 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29095 = ADVANCED_FACE('',(#29096),#29114,.F.); +#29096 = FACE_BOUND('',#29097,.F.); +#29097 = EDGE_LOOP('',(#29098,#29099,#29107,#29113)); +#29098 = ORIENTED_EDGE('',*,*,#29085,.T.); +#29099 = ORIENTED_EDGE('',*,*,#29100,.T.); +#29100 = EDGE_CURVE('',#29078,#29101,#29103,.T.); +#29101 = VERTEX_POINT('',#29102); +#29102 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#29103 = LINE('',#29104,#29105); +#29104 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#29105 = VECTOR('',#29106,1.); +#29106 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29107 = ORIENTED_EDGE('',*,*,#29108,.F.); +#29108 = EDGE_CURVE('',#23822,#29101,#29109,.T.); +#29109 = LINE('',#29110,#29111); +#29110 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#29111 = VECTOR('',#29112,1.); +#29112 = DIRECTION('',(0.,-0.,-1.)); +#29113 = ORIENTED_EDGE('',*,*,#23829,.F.); +#29114 = PLANE('',#29115); +#29115 = AXIS2_PLACEMENT_3D('',#29116,#29117,#29118); +#29116 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#29117 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29118 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29119 = ADVANCED_FACE('',(#29120),#29163,.F.); +#29120 = FACE_BOUND('',#29121,.F.); +#29121 = EDGE_LOOP('',(#29122,#29123,#29124,#29132,#29140,#29148,#29156, + #29162)); +#29122 = ORIENTED_EDGE('',*,*,#23846,.F.); +#29123 = ORIENTED_EDGE('',*,*,#29108,.T.); +#29124 = ORIENTED_EDGE('',*,*,#29125,.T.); +#29125 = EDGE_CURVE('',#29101,#29126,#29128,.T.); +#29126 = VERTEX_POINT('',#29127); +#29127 = CARTESIAN_POINT('',(-0.1,-18.08,0.9)); +#29128 = LINE('',#29129,#29130); +#29129 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#29130 = VECTOR('',#29131,1.); +#29131 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29132 = ORIENTED_EDGE('',*,*,#29133,.F.); +#29133 = EDGE_CURVE('',#29134,#29126,#29136,.T.); +#29134 = VERTEX_POINT('',#29135); +#29135 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#29136 = LINE('',#29137,#29138); +#29137 = CARTESIAN_POINT('',(-0.1,-18.08,6.055738799212)); +#29138 = VECTOR('',#29139,1.); +#29139 = DIRECTION('',(-0.,0.,-1.)); +#29140 = ORIENTED_EDGE('',*,*,#29141,.T.); +#29141 = EDGE_CURVE('',#29134,#29142,#29144,.T.); +#29142 = VERTEX_POINT('',#29143); +#29143 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#29144 = LINE('',#29145,#29146); +#29145 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#29146 = VECTOR('',#29147,1.); +#29147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29148 = ORIENTED_EDGE('',*,*,#29149,.T.); +#29149 = EDGE_CURVE('',#29142,#29150,#29152,.T.); +#29150 = VERTEX_POINT('',#29151); +#29151 = CARTESIAN_POINT('',(0.1,-18.08,0.9)); +#29152 = LINE('',#29153,#29154); +#29153 = CARTESIAN_POINT('',(0.1,-18.08,6.055738799212)); +#29154 = VECTOR('',#29155,1.); +#29155 = DIRECTION('',(-0.,0.,-1.)); +#29156 = ORIENTED_EDGE('',*,*,#29157,.T.); +#29157 = EDGE_CURVE('',#29150,#29013,#29158,.T.); +#29158 = LINE('',#29159,#29160); +#29159 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#29160 = VECTOR('',#29161,1.); +#29161 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29162 = ORIENTED_EDGE('',*,*,#29012,.F.); +#29163 = PLANE('',#29164); +#29164 = AXIS2_PLACEMENT_3D('',#29165,#29166,#29167); +#29165 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#29166 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29167 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29168 = ADVANCED_FACE('',(#29169),#29194,.F.); +#29169 = FACE_BOUND('',#29170,.F.); +#29170 = EDGE_LOOP('',(#29171,#29179,#29187,#29193)); +#29171 = ORIENTED_EDGE('',*,*,#29172,.T.); +#29172 = EDGE_CURVE('',#23861,#29173,#29175,.T.); +#29173 = VERTEX_POINT('',#29174); +#29174 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#29175 = LINE('',#29176,#29177); +#29176 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#29177 = VECTOR('',#29178,1.); +#29178 = DIRECTION('',(0.,-0.,-1.)); +#29179 = ORIENTED_EDGE('',*,*,#29180,.T.); +#29180 = EDGE_CURVE('',#29173,#29181,#29183,.T.); +#29181 = VERTEX_POINT('',#29182); +#29182 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#29183 = LINE('',#29184,#29185); +#29184 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#29185 = VECTOR('',#29186,1.); +#29186 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29187 = ORIENTED_EDGE('',*,*,#29188,.F.); +#29188 = EDGE_CURVE('',#23870,#29181,#29189,.T.); +#29189 = LINE('',#29190,#29191); +#29190 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#29191 = VECTOR('',#29192,1.); +#29192 = DIRECTION('',(0.,-0.,-1.)); +#29193 = ORIENTED_EDGE('',*,*,#23877,.F.); +#29194 = PLANE('',#29195); +#29195 = AXIS2_PLACEMENT_3D('',#29196,#29197,#29198); +#29196 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#29197 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29198 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29199 = ADVANCED_FACE('',(#29200),#29250,.F.); +#29200 = FACE_BOUND('',#29201,.F.); +#29201 = EDGE_LOOP('',(#29202,#29203,#29204,#29212,#29220,#29228,#29236, + #29244)); +#29202 = ORIENTED_EDGE('',*,*,#23901,.F.); +#29203 = ORIENTED_EDGE('',*,*,#29188,.T.); +#29204 = ORIENTED_EDGE('',*,*,#29205,.T.); +#29205 = EDGE_CURVE('',#29181,#29206,#29208,.T.); +#29206 = VERTEX_POINT('',#29207); +#29207 = CARTESIAN_POINT('',(0.1,-14.94,0.9)); +#29208 = LINE('',#29209,#29210); +#29209 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#29210 = VECTOR('',#29211,1.); +#29211 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29212 = ORIENTED_EDGE('',*,*,#29213,.T.); +#29213 = EDGE_CURVE('',#29206,#29214,#29216,.T.); +#29214 = VERTEX_POINT('',#29215); +#29215 = CARTESIAN_POINT('',(0.1,-14.94,7.4)); +#29216 = LINE('',#29217,#29218); +#29217 = CARTESIAN_POINT('',(0.1,-14.94,6.055738799212)); +#29218 = VECTOR('',#29219,1.); +#29219 = DIRECTION('',(0.,-0.,1.)); +#29220 = ORIENTED_EDGE('',*,*,#29221,.F.); +#29221 = EDGE_CURVE('',#29222,#29214,#29224,.T.); +#29222 = VERTEX_POINT('',#29223); +#29223 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#29224 = LINE('',#29225,#29226); +#29225 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#29226 = VECTOR('',#29227,1.); +#29227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29228 = ORIENTED_EDGE('',*,*,#29229,.F.); +#29229 = EDGE_CURVE('',#29230,#29222,#29232,.T.); +#29230 = VERTEX_POINT('',#29231); +#29231 = CARTESIAN_POINT('',(-0.1,-14.94,0.9)); +#29232 = LINE('',#29233,#29234); +#29233 = CARTESIAN_POINT('',(-0.1,-14.94,6.055738799212)); +#29234 = VECTOR('',#29235,1.); +#29235 = DIRECTION('',(0.,-0.,1.)); +#29236 = ORIENTED_EDGE('',*,*,#29237,.T.); +#29237 = EDGE_CURVE('',#29230,#29238,#29240,.T.); +#29238 = VERTEX_POINT('',#29239); +#29239 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#29240 = LINE('',#29241,#29242); +#29241 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#29242 = VECTOR('',#29243,1.); +#29243 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29244 = ORIENTED_EDGE('',*,*,#29245,.F.); +#29245 = EDGE_CURVE('',#23894,#29238,#29246,.T.); +#29246 = LINE('',#29247,#29248); +#29247 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#29248 = VECTOR('',#29249,1.); +#29249 = DIRECTION('',(0.,-0.,-1.)); +#29250 = PLANE('',#29251); +#29251 = AXIS2_PLACEMENT_3D('',#29252,#29253,#29254); +#29252 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#29253 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29255 = ADVANCED_FACE('',(#29256),#29274,.F.); +#29256 = FACE_BOUND('',#29257,.F.); +#29257 = EDGE_LOOP('',(#29258,#29259,#29267,#29273)); +#29258 = ORIENTED_EDGE('',*,*,#29245,.T.); +#29259 = ORIENTED_EDGE('',*,*,#29260,.T.); +#29260 = EDGE_CURVE('',#29238,#29261,#29263,.T.); +#29261 = VERTEX_POINT('',#29262); +#29262 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#29263 = LINE('',#29264,#29265); +#29264 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#29265 = VECTOR('',#29266,1.); +#29266 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29267 = ORIENTED_EDGE('',*,*,#29268,.F.); +#29268 = EDGE_CURVE('',#23918,#29261,#29269,.T.); +#29269 = LINE('',#29270,#29271); +#29270 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#29271 = VECTOR('',#29272,1.); +#29272 = DIRECTION('',(0.,-0.,-1.)); +#29273 = ORIENTED_EDGE('',*,*,#23925,.F.); +#29274 = PLANE('',#29275); +#29275 = AXIS2_PLACEMENT_3D('',#29276,#29277,#29278); +#29276 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#29277 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29278 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29279 = ADVANCED_FACE('',(#29280),#29323,.F.); +#29280 = FACE_BOUND('',#29281,.F.); +#29281 = EDGE_LOOP('',(#29282,#29283,#29284,#29292,#29300,#29308,#29316, + #29322)); +#29282 = ORIENTED_EDGE('',*,*,#23942,.F.); +#29283 = ORIENTED_EDGE('',*,*,#29268,.T.); +#29284 = ORIENTED_EDGE('',*,*,#29285,.T.); +#29285 = EDGE_CURVE('',#29261,#29286,#29288,.T.); +#29286 = VERTEX_POINT('',#29287); +#29287 = CARTESIAN_POINT('',(-0.1,-15.54,0.9)); +#29288 = LINE('',#29289,#29290); +#29289 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#29290 = VECTOR('',#29291,1.); +#29291 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29292 = ORIENTED_EDGE('',*,*,#29293,.F.); +#29293 = EDGE_CURVE('',#29294,#29286,#29296,.T.); +#29294 = VERTEX_POINT('',#29295); +#29295 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#29296 = LINE('',#29297,#29298); +#29297 = CARTESIAN_POINT('',(-0.1,-15.54,6.055738799212)); +#29298 = VECTOR('',#29299,1.); +#29299 = DIRECTION('',(-0.,0.,-1.)); +#29300 = ORIENTED_EDGE('',*,*,#29301,.T.); +#29301 = EDGE_CURVE('',#29294,#29302,#29304,.T.); +#29302 = VERTEX_POINT('',#29303); +#29303 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#29304 = LINE('',#29305,#29306); +#29305 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#29306 = VECTOR('',#29307,1.); +#29307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29308 = ORIENTED_EDGE('',*,*,#29309,.T.); +#29309 = EDGE_CURVE('',#29302,#29310,#29312,.T.); +#29310 = VERTEX_POINT('',#29311); +#29311 = CARTESIAN_POINT('',(0.1,-15.54,0.9)); +#29312 = LINE('',#29313,#29314); +#29313 = CARTESIAN_POINT('',(0.1,-15.54,6.055738799212)); +#29314 = VECTOR('',#29315,1.); +#29315 = DIRECTION('',(-0.,0.,-1.)); +#29316 = ORIENTED_EDGE('',*,*,#29317,.T.); +#29317 = EDGE_CURVE('',#29310,#29173,#29318,.T.); +#29318 = LINE('',#29319,#29320); +#29319 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#29320 = VECTOR('',#29321,1.); +#29321 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29322 = ORIENTED_EDGE('',*,*,#29172,.F.); +#29323 = PLANE('',#29324); +#29324 = AXIS2_PLACEMENT_3D('',#29325,#29326,#29327); +#29325 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#29326 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29327 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29328 = ADVANCED_FACE('',(#29329),#29354,.F.); +#29329 = FACE_BOUND('',#29330,.F.); +#29330 = EDGE_LOOP('',(#29331,#29339,#29347,#29353)); +#29331 = ORIENTED_EDGE('',*,*,#29332,.T.); +#29332 = EDGE_CURVE('',#23957,#29333,#29335,.T.); +#29333 = VERTEX_POINT('',#29334); +#29334 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#29335 = LINE('',#29336,#29337); +#29336 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#29337 = VECTOR('',#29338,1.); +#29338 = DIRECTION('',(0.,-0.,-1.)); +#29339 = ORIENTED_EDGE('',*,*,#29340,.T.); +#29340 = EDGE_CURVE('',#29333,#29341,#29343,.T.); +#29341 = VERTEX_POINT('',#29342); +#29342 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#29343 = LINE('',#29344,#29345); +#29344 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#29345 = VECTOR('',#29346,1.); +#29346 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29347 = ORIENTED_EDGE('',*,*,#29348,.F.); +#29348 = EDGE_CURVE('',#23966,#29341,#29349,.T.); +#29349 = LINE('',#29350,#29351); +#29350 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#29351 = VECTOR('',#29352,1.); +#29352 = DIRECTION('',(0.,-0.,-1.)); +#29353 = ORIENTED_EDGE('',*,*,#23973,.F.); +#29354 = PLANE('',#29355); +#29355 = AXIS2_PLACEMENT_3D('',#29356,#29357,#29358); +#29356 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#29357 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29358 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29359 = ADVANCED_FACE('',(#29360),#29410,.F.); +#29360 = FACE_BOUND('',#29361,.F.); +#29361 = EDGE_LOOP('',(#29362,#29363,#29364,#29372,#29380,#29388,#29396, + #29404)); +#29362 = ORIENTED_EDGE('',*,*,#23997,.F.); +#29363 = ORIENTED_EDGE('',*,*,#29348,.T.); +#29364 = ORIENTED_EDGE('',*,*,#29365,.T.); +#29365 = EDGE_CURVE('',#29341,#29366,#29368,.T.); +#29366 = VERTEX_POINT('',#29367); +#29367 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#29368 = LINE('',#29369,#29370); +#29369 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#29370 = VECTOR('',#29371,1.); +#29371 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29372 = ORIENTED_EDGE('',*,*,#29373,.T.); +#29373 = EDGE_CURVE('',#29366,#29374,#29376,.T.); +#29374 = VERTEX_POINT('',#29375); +#29375 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#29376 = LINE('',#29377,#29378); +#29377 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#29378 = VECTOR('',#29379,1.); +#29379 = DIRECTION('',(0.,-0.,1.)); +#29380 = ORIENTED_EDGE('',*,*,#29381,.F.); +#29381 = EDGE_CURVE('',#29382,#29374,#29384,.T.); +#29382 = VERTEX_POINT('',#29383); +#29383 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#29384 = LINE('',#29385,#29386); +#29385 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#29386 = VECTOR('',#29387,1.); +#29387 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29388 = ORIENTED_EDGE('',*,*,#29389,.F.); +#29389 = EDGE_CURVE('',#29390,#29382,#29392,.T.); +#29390 = VERTEX_POINT('',#29391); +#29391 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#29392 = LINE('',#29393,#29394); +#29393 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#29394 = VECTOR('',#29395,1.); +#29395 = DIRECTION('',(0.,-0.,1.)); +#29396 = ORIENTED_EDGE('',*,*,#29397,.T.); +#29397 = EDGE_CURVE('',#29390,#29398,#29400,.T.); +#29398 = VERTEX_POINT('',#29399); +#29399 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#29400 = LINE('',#29401,#29402); +#29401 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#29402 = VECTOR('',#29403,1.); +#29403 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29404 = ORIENTED_EDGE('',*,*,#29405,.F.); +#29405 = EDGE_CURVE('',#23990,#29398,#29406,.T.); +#29406 = LINE('',#29407,#29408); +#29407 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#29408 = VECTOR('',#29409,1.); +#29409 = DIRECTION('',(0.,-0.,-1.)); +#29410 = PLANE('',#29411); +#29411 = AXIS2_PLACEMENT_3D('',#29412,#29413,#29414); +#29412 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#29413 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29414 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29415 = ADVANCED_FACE('',(#29416),#29434,.F.); +#29416 = FACE_BOUND('',#29417,.F.); +#29417 = EDGE_LOOP('',(#29418,#29419,#29427,#29433)); +#29418 = ORIENTED_EDGE('',*,*,#29405,.T.); +#29419 = ORIENTED_EDGE('',*,*,#29420,.T.); +#29420 = EDGE_CURVE('',#29398,#29421,#29423,.T.); +#29421 = VERTEX_POINT('',#29422); +#29422 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#29423 = LINE('',#29424,#29425); +#29424 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#29425 = VECTOR('',#29426,1.); +#29426 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29427 = ORIENTED_EDGE('',*,*,#29428,.F.); +#29428 = EDGE_CURVE('',#24014,#29421,#29429,.T.); +#29429 = LINE('',#29430,#29431); +#29430 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#29431 = VECTOR('',#29432,1.); +#29432 = DIRECTION('',(0.,-0.,-1.)); +#29433 = ORIENTED_EDGE('',*,*,#24021,.F.); +#29434 = PLANE('',#29435); +#29435 = AXIS2_PLACEMENT_3D('',#29436,#29437,#29438); +#29436 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#29437 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29438 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29439 = ADVANCED_FACE('',(#29440),#29483,.F.); +#29440 = FACE_BOUND('',#29441,.F.); +#29441 = EDGE_LOOP('',(#29442,#29443,#29444,#29452,#29460,#29468,#29476, + #29482)); +#29442 = ORIENTED_EDGE('',*,*,#24038,.F.); +#29443 = ORIENTED_EDGE('',*,*,#29428,.T.); +#29444 = ORIENTED_EDGE('',*,*,#29445,.T.); +#29445 = EDGE_CURVE('',#29421,#29446,#29448,.T.); +#29446 = VERTEX_POINT('',#29447); +#29447 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#29448 = LINE('',#29449,#29450); +#29449 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#29450 = VECTOR('',#29451,1.); +#29451 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29452 = ORIENTED_EDGE('',*,*,#29453,.F.); +#29453 = EDGE_CURVE('',#29454,#29446,#29456,.T.); +#29454 = VERTEX_POINT('',#29455); +#29455 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#29456 = LINE('',#29457,#29458); +#29457 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#29458 = VECTOR('',#29459,1.); +#29459 = DIRECTION('',(-0.,0.,-1.)); +#29460 = ORIENTED_EDGE('',*,*,#29461,.T.); +#29461 = EDGE_CURVE('',#29454,#29462,#29464,.T.); +#29462 = VERTEX_POINT('',#29463); +#29463 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#29464 = LINE('',#29465,#29466); +#29465 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#29466 = VECTOR('',#29467,1.); +#29467 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29468 = ORIENTED_EDGE('',*,*,#29469,.T.); +#29469 = EDGE_CURVE('',#29462,#29470,#29472,.T.); +#29470 = VERTEX_POINT('',#29471); +#29471 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#29472 = LINE('',#29473,#29474); +#29473 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#29474 = VECTOR('',#29475,1.); +#29475 = DIRECTION('',(-0.,0.,-1.)); +#29476 = ORIENTED_EDGE('',*,*,#29477,.T.); +#29477 = EDGE_CURVE('',#29470,#29333,#29478,.T.); +#29478 = LINE('',#29479,#29480); +#29479 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#29480 = VECTOR('',#29481,1.); +#29481 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29482 = ORIENTED_EDGE('',*,*,#29332,.F.); +#29483 = PLANE('',#29484); +#29484 = AXIS2_PLACEMENT_3D('',#29485,#29486,#29487); +#29485 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#29486 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29487 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29488 = ADVANCED_FACE('',(#29489),#29514,.F.); +#29489 = FACE_BOUND('',#29490,.F.); +#29490 = EDGE_LOOP('',(#29491,#29499,#29507,#29513)); +#29491 = ORIENTED_EDGE('',*,*,#29492,.T.); +#29492 = EDGE_CURVE('',#24053,#29493,#29495,.T.); +#29493 = VERTEX_POINT('',#29494); +#29494 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#29495 = LINE('',#29496,#29497); +#29496 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#29497 = VECTOR('',#29498,1.); +#29498 = DIRECTION('',(0.,-0.,-1.)); +#29499 = ORIENTED_EDGE('',*,*,#29500,.T.); +#29500 = EDGE_CURVE('',#29493,#29501,#29503,.T.); +#29501 = VERTEX_POINT('',#29502); +#29502 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#29503 = LINE('',#29504,#29505); +#29504 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#29505 = VECTOR('',#29506,1.); +#29506 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29507 = ORIENTED_EDGE('',*,*,#29508,.F.); +#29508 = EDGE_CURVE('',#24062,#29501,#29509,.T.); +#29509 = LINE('',#29510,#29511); +#29510 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#29511 = VECTOR('',#29512,1.); +#29512 = DIRECTION('',(0.,-0.,-1.)); +#29513 = ORIENTED_EDGE('',*,*,#24069,.F.); +#29514 = PLANE('',#29515); +#29515 = AXIS2_PLACEMENT_3D('',#29516,#29517,#29518); +#29516 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#29517 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29518 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29519 = ADVANCED_FACE('',(#29520),#29570,.F.); +#29520 = FACE_BOUND('',#29521,.F.); +#29521 = EDGE_LOOP('',(#29522,#29523,#29524,#29532,#29540,#29548,#29556, + #29564)); +#29522 = ORIENTED_EDGE('',*,*,#24093,.F.); +#29523 = ORIENTED_EDGE('',*,*,#29508,.T.); +#29524 = ORIENTED_EDGE('',*,*,#29525,.T.); +#29525 = EDGE_CURVE('',#29501,#29526,#29528,.T.); +#29526 = VERTEX_POINT('',#29527); +#29527 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#29528 = LINE('',#29529,#29530); +#29529 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#29530 = VECTOR('',#29531,1.); +#29531 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29532 = ORIENTED_EDGE('',*,*,#29533,.T.); +#29533 = EDGE_CURVE('',#29526,#29534,#29536,.T.); +#29534 = VERTEX_POINT('',#29535); +#29535 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#29536 = LINE('',#29537,#29538); +#29537 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#29538 = VECTOR('',#29539,1.); +#29539 = DIRECTION('',(0.,-0.,1.)); +#29540 = ORIENTED_EDGE('',*,*,#29541,.F.); +#29541 = EDGE_CURVE('',#29542,#29534,#29544,.T.); +#29542 = VERTEX_POINT('',#29543); +#29543 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#29544 = LINE('',#29545,#29546); +#29545 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#29546 = VECTOR('',#29547,1.); +#29547 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29548 = ORIENTED_EDGE('',*,*,#29549,.F.); +#29549 = EDGE_CURVE('',#29550,#29542,#29552,.T.); +#29550 = VERTEX_POINT('',#29551); +#29551 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#29552 = LINE('',#29553,#29554); +#29553 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#29554 = VECTOR('',#29555,1.); +#29555 = DIRECTION('',(0.,-0.,1.)); +#29556 = ORIENTED_EDGE('',*,*,#29557,.T.); +#29557 = EDGE_CURVE('',#29550,#29558,#29560,.T.); +#29558 = VERTEX_POINT('',#29559); +#29559 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#29560 = LINE('',#29561,#29562); +#29561 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#29562 = VECTOR('',#29563,1.); +#29563 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29564 = ORIENTED_EDGE('',*,*,#29565,.F.); +#29565 = EDGE_CURVE('',#24086,#29558,#29566,.T.); +#29566 = LINE('',#29567,#29568); +#29567 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#29568 = VECTOR('',#29569,1.); +#29569 = DIRECTION('',(0.,-0.,-1.)); +#29570 = PLANE('',#29571); +#29571 = AXIS2_PLACEMENT_3D('',#29572,#29573,#29574); +#29572 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#29573 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29574 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29575 = ADVANCED_FACE('',(#29576),#29594,.F.); +#29576 = FACE_BOUND('',#29577,.F.); +#29577 = EDGE_LOOP('',(#29578,#29579,#29587,#29593)); +#29578 = ORIENTED_EDGE('',*,*,#29565,.T.); +#29579 = ORIENTED_EDGE('',*,*,#29580,.T.); +#29580 = EDGE_CURVE('',#29558,#29581,#29583,.T.); +#29581 = VERTEX_POINT('',#29582); +#29582 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#29583 = LINE('',#29584,#29585); +#29584 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#29585 = VECTOR('',#29586,1.); +#29586 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29587 = ORIENTED_EDGE('',*,*,#29588,.F.); +#29588 = EDGE_CURVE('',#24110,#29581,#29589,.T.); +#29589 = LINE('',#29590,#29591); +#29590 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#29591 = VECTOR('',#29592,1.); +#29592 = DIRECTION('',(0.,-0.,-1.)); +#29593 = ORIENTED_EDGE('',*,*,#24117,.F.); +#29594 = PLANE('',#29595); +#29595 = AXIS2_PLACEMENT_3D('',#29596,#29597,#29598); +#29596 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#29597 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29598 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29599 = ADVANCED_FACE('',(#29600),#29643,.F.); +#29600 = FACE_BOUND('',#29601,.F.); +#29601 = EDGE_LOOP('',(#29602,#29603,#29604,#29612,#29620,#29628,#29636, + #29642)); +#29602 = ORIENTED_EDGE('',*,*,#24134,.F.); +#29603 = ORIENTED_EDGE('',*,*,#29588,.T.); +#29604 = ORIENTED_EDGE('',*,*,#29605,.T.); +#29605 = EDGE_CURVE('',#29581,#29606,#29608,.T.); +#29606 = VERTEX_POINT('',#29607); +#29607 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#29608 = LINE('',#29609,#29610); +#29609 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#29610 = VECTOR('',#29611,1.); +#29611 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29612 = ORIENTED_EDGE('',*,*,#29613,.F.); +#29613 = EDGE_CURVE('',#29614,#29606,#29616,.T.); +#29614 = VERTEX_POINT('',#29615); +#29615 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#29616 = LINE('',#29617,#29618); +#29617 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#29618 = VECTOR('',#29619,1.); +#29619 = DIRECTION('',(-0.,0.,-1.)); +#29620 = ORIENTED_EDGE('',*,*,#29621,.T.); +#29621 = EDGE_CURVE('',#29614,#29622,#29624,.T.); +#29622 = VERTEX_POINT('',#29623); +#29623 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#29624 = LINE('',#29625,#29626); +#29625 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#29626 = VECTOR('',#29627,1.); +#29627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29628 = ORIENTED_EDGE('',*,*,#29629,.T.); +#29629 = EDGE_CURVE('',#29622,#29630,#29632,.T.); +#29630 = VERTEX_POINT('',#29631); +#29631 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#29632 = LINE('',#29633,#29634); +#29633 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#29634 = VECTOR('',#29635,1.); +#29635 = DIRECTION('',(-0.,0.,-1.)); +#29636 = ORIENTED_EDGE('',*,*,#29637,.T.); +#29637 = EDGE_CURVE('',#29630,#29493,#29638,.T.); +#29638 = LINE('',#29639,#29640); +#29639 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#29640 = VECTOR('',#29641,1.); +#29641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29642 = ORIENTED_EDGE('',*,*,#29492,.F.); +#29643 = PLANE('',#29644); +#29644 = AXIS2_PLACEMENT_3D('',#29645,#29646,#29647); +#29645 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#29646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29647 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29648 = ADVANCED_FACE('',(#29649),#29674,.F.); +#29649 = FACE_BOUND('',#29650,.F.); +#29650 = EDGE_LOOP('',(#29651,#29659,#29667,#29673)); +#29651 = ORIENTED_EDGE('',*,*,#29652,.T.); +#29652 = EDGE_CURVE('',#24149,#29653,#29655,.T.); +#29653 = VERTEX_POINT('',#29654); +#29654 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#29655 = LINE('',#29656,#29657); +#29656 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#29657 = VECTOR('',#29658,1.); +#29658 = DIRECTION('',(0.,-0.,-1.)); +#29659 = ORIENTED_EDGE('',*,*,#29660,.T.); +#29660 = EDGE_CURVE('',#29653,#29661,#29663,.T.); +#29661 = VERTEX_POINT('',#29662); +#29662 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#29663 = LINE('',#29664,#29665); +#29664 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#29665 = VECTOR('',#29666,1.); +#29666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29667 = ORIENTED_EDGE('',*,*,#29668,.F.); +#29668 = EDGE_CURVE('',#24158,#29661,#29669,.T.); +#29669 = LINE('',#29670,#29671); +#29670 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#29671 = VECTOR('',#29672,1.); +#29672 = DIRECTION('',(0.,-0.,-1.)); +#29673 = ORIENTED_EDGE('',*,*,#24165,.F.); +#29674 = PLANE('',#29675); +#29675 = AXIS2_PLACEMENT_3D('',#29676,#29677,#29678); +#29676 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#29677 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29678 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29679 = ADVANCED_FACE('',(#29680),#29730,.F.); +#29680 = FACE_BOUND('',#29681,.F.); +#29681 = EDGE_LOOP('',(#29682,#29683,#29684,#29692,#29700,#29708,#29716, + #29724)); +#29682 = ORIENTED_EDGE('',*,*,#24189,.F.); +#29683 = ORIENTED_EDGE('',*,*,#29668,.T.); +#29684 = ORIENTED_EDGE('',*,*,#29685,.T.); +#29685 = EDGE_CURVE('',#29661,#29686,#29688,.T.); +#29686 = VERTEX_POINT('',#29687); +#29687 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#29688 = LINE('',#29689,#29690); +#29689 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#29690 = VECTOR('',#29691,1.); +#29691 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29692 = ORIENTED_EDGE('',*,*,#29693,.T.); +#29693 = EDGE_CURVE('',#29686,#29694,#29696,.T.); +#29694 = VERTEX_POINT('',#29695); +#29695 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#29696 = LINE('',#29697,#29698); +#29697 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#29698 = VECTOR('',#29699,1.); +#29699 = DIRECTION('',(0.,-0.,1.)); +#29700 = ORIENTED_EDGE('',*,*,#29701,.F.); +#29701 = EDGE_CURVE('',#29702,#29694,#29704,.T.); +#29702 = VERTEX_POINT('',#29703); +#29703 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#29704 = LINE('',#29705,#29706); +#29705 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#29706 = VECTOR('',#29707,1.); +#29707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29708 = ORIENTED_EDGE('',*,*,#29709,.F.); +#29709 = EDGE_CURVE('',#29710,#29702,#29712,.T.); +#29710 = VERTEX_POINT('',#29711); +#29711 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#29712 = LINE('',#29713,#29714); +#29713 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#29714 = VECTOR('',#29715,1.); +#29715 = DIRECTION('',(0.,-0.,1.)); +#29716 = ORIENTED_EDGE('',*,*,#29717,.T.); +#29717 = EDGE_CURVE('',#29710,#29718,#29720,.T.); +#29718 = VERTEX_POINT('',#29719); +#29719 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#29720 = LINE('',#29721,#29722); +#29721 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#29722 = VECTOR('',#29723,1.); +#29723 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29724 = ORIENTED_EDGE('',*,*,#29725,.F.); +#29725 = EDGE_CURVE('',#24182,#29718,#29726,.T.); +#29726 = LINE('',#29727,#29728); +#29727 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#29728 = VECTOR('',#29729,1.); +#29729 = DIRECTION('',(0.,-0.,-1.)); +#29730 = PLANE('',#29731); +#29731 = AXIS2_PLACEMENT_3D('',#29732,#29733,#29734); +#29732 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#29733 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29734 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29735 = ADVANCED_FACE('',(#29736),#29754,.F.); +#29736 = FACE_BOUND('',#29737,.F.); +#29737 = EDGE_LOOP('',(#29738,#29739,#29747,#29753)); +#29738 = ORIENTED_EDGE('',*,*,#29725,.T.); +#29739 = ORIENTED_EDGE('',*,*,#29740,.T.); +#29740 = EDGE_CURVE('',#29718,#29741,#29743,.T.); +#29741 = VERTEX_POINT('',#29742); +#29742 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#29743 = LINE('',#29744,#29745); +#29744 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#29745 = VECTOR('',#29746,1.); +#29746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29747 = ORIENTED_EDGE('',*,*,#29748,.F.); +#29748 = EDGE_CURVE('',#24206,#29741,#29749,.T.); +#29749 = LINE('',#29750,#29751); +#29750 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#29751 = VECTOR('',#29752,1.); +#29752 = DIRECTION('',(0.,-0.,-1.)); +#29753 = ORIENTED_EDGE('',*,*,#24213,.F.); +#29754 = PLANE('',#29755); +#29755 = AXIS2_PLACEMENT_3D('',#29756,#29757,#29758); +#29756 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#29757 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29758 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29759 = ADVANCED_FACE('',(#29760),#29803,.F.); +#29760 = FACE_BOUND('',#29761,.F.); +#29761 = EDGE_LOOP('',(#29762,#29763,#29764,#29772,#29780,#29788,#29796, + #29802)); +#29762 = ORIENTED_EDGE('',*,*,#24230,.F.); +#29763 = ORIENTED_EDGE('',*,*,#29748,.T.); +#29764 = ORIENTED_EDGE('',*,*,#29765,.T.); +#29765 = EDGE_CURVE('',#29741,#29766,#29768,.T.); +#29766 = VERTEX_POINT('',#29767); +#29767 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#29768 = LINE('',#29769,#29770); +#29769 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#29770 = VECTOR('',#29771,1.); +#29771 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29772 = ORIENTED_EDGE('',*,*,#29773,.F.); +#29773 = EDGE_CURVE('',#29774,#29766,#29776,.T.); +#29774 = VERTEX_POINT('',#29775); +#29775 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#29776 = LINE('',#29777,#29778); +#29777 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#29778 = VECTOR('',#29779,1.); +#29779 = DIRECTION('',(-0.,0.,-1.)); +#29780 = ORIENTED_EDGE('',*,*,#29781,.T.); +#29781 = EDGE_CURVE('',#29774,#29782,#29784,.T.); +#29782 = VERTEX_POINT('',#29783); +#29783 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#29784 = LINE('',#29785,#29786); +#29785 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#29786 = VECTOR('',#29787,1.); +#29787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29788 = ORIENTED_EDGE('',*,*,#29789,.T.); +#29789 = EDGE_CURVE('',#29782,#29790,#29792,.T.); +#29790 = VERTEX_POINT('',#29791); +#29791 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#29792 = LINE('',#29793,#29794); +#29793 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#29794 = VECTOR('',#29795,1.); +#29795 = DIRECTION('',(-0.,0.,-1.)); +#29796 = ORIENTED_EDGE('',*,*,#29797,.T.); +#29797 = EDGE_CURVE('',#29790,#29653,#29798,.T.); +#29798 = LINE('',#29799,#29800); +#29799 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#29800 = VECTOR('',#29801,1.); +#29801 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29802 = ORIENTED_EDGE('',*,*,#29652,.F.); +#29803 = PLANE('',#29804); +#29804 = AXIS2_PLACEMENT_3D('',#29805,#29806,#29807); +#29805 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#29806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29807 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29808 = ADVANCED_FACE('',(#29809),#29834,.F.); +#29809 = FACE_BOUND('',#29810,.F.); +#29810 = EDGE_LOOP('',(#29811,#29819,#29827,#29833)); +#29811 = ORIENTED_EDGE('',*,*,#29812,.T.); +#29812 = EDGE_CURVE('',#24245,#29813,#29815,.T.); +#29813 = VERTEX_POINT('',#29814); +#29814 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#29815 = LINE('',#29816,#29817); +#29816 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#29817 = VECTOR('',#29818,1.); +#29818 = DIRECTION('',(0.,-0.,-1.)); +#29819 = ORIENTED_EDGE('',*,*,#29820,.T.); +#29820 = EDGE_CURVE('',#29813,#29821,#29823,.T.); +#29821 = VERTEX_POINT('',#29822); +#29822 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#29823 = LINE('',#29824,#29825); +#29824 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#29825 = VECTOR('',#29826,1.); +#29826 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29827 = ORIENTED_EDGE('',*,*,#29828,.F.); +#29828 = EDGE_CURVE('',#24254,#29821,#29829,.T.); +#29829 = LINE('',#29830,#29831); +#29830 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#29831 = VECTOR('',#29832,1.); +#29832 = DIRECTION('',(0.,-0.,-1.)); +#29833 = ORIENTED_EDGE('',*,*,#24261,.F.); +#29834 = PLANE('',#29835); +#29835 = AXIS2_PLACEMENT_3D('',#29836,#29837,#29838); +#29836 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#29837 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29838 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29839 = ADVANCED_FACE('',(#29840),#29890,.F.); +#29840 = FACE_BOUND('',#29841,.F.); +#29841 = EDGE_LOOP('',(#29842,#29843,#29844,#29852,#29860,#29868,#29876, + #29884)); +#29842 = ORIENTED_EDGE('',*,*,#24285,.F.); +#29843 = ORIENTED_EDGE('',*,*,#29828,.T.); +#29844 = ORIENTED_EDGE('',*,*,#29845,.T.); +#29845 = EDGE_CURVE('',#29821,#29846,#29848,.T.); +#29846 = VERTEX_POINT('',#29847); +#29847 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#29848 = LINE('',#29849,#29850); +#29849 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#29850 = VECTOR('',#29851,1.); +#29851 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29852 = ORIENTED_EDGE('',*,*,#29853,.T.); +#29853 = EDGE_CURVE('',#29846,#29854,#29856,.T.); +#29854 = VERTEX_POINT('',#29855); +#29855 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#29856 = LINE('',#29857,#29858); +#29857 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#29858 = VECTOR('',#29859,1.); +#29859 = DIRECTION('',(0.,-0.,1.)); +#29860 = ORIENTED_EDGE('',*,*,#29861,.F.); +#29861 = EDGE_CURVE('',#29862,#29854,#29864,.T.); +#29862 = VERTEX_POINT('',#29863); +#29863 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#29864 = LINE('',#29865,#29866); +#29865 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#29866 = VECTOR('',#29867,1.); +#29867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29868 = ORIENTED_EDGE('',*,*,#29869,.F.); +#29869 = EDGE_CURVE('',#29870,#29862,#29872,.T.); +#29870 = VERTEX_POINT('',#29871); +#29871 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#29872 = LINE('',#29873,#29874); +#29873 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#29874 = VECTOR('',#29875,1.); +#29875 = DIRECTION('',(0.,-0.,1.)); +#29876 = ORIENTED_EDGE('',*,*,#29877,.T.); +#29877 = EDGE_CURVE('',#29870,#29878,#29880,.T.); +#29878 = VERTEX_POINT('',#29879); +#29879 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#29880 = LINE('',#29881,#29882); +#29881 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#29882 = VECTOR('',#29883,1.); +#29883 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29884 = ORIENTED_EDGE('',*,*,#29885,.F.); +#29885 = EDGE_CURVE('',#24278,#29878,#29886,.T.); +#29886 = LINE('',#29887,#29888); +#29887 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#29888 = VECTOR('',#29889,1.); +#29889 = DIRECTION('',(0.,-0.,-1.)); +#29890 = PLANE('',#29891); +#29891 = AXIS2_PLACEMENT_3D('',#29892,#29893,#29894); +#29892 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#29893 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29894 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29895 = ADVANCED_FACE('',(#29896),#29914,.F.); +#29896 = FACE_BOUND('',#29897,.F.); +#29897 = EDGE_LOOP('',(#29898,#29899,#29907,#29913)); +#29898 = ORIENTED_EDGE('',*,*,#29885,.T.); +#29899 = ORIENTED_EDGE('',*,*,#29900,.T.); +#29900 = EDGE_CURVE('',#29878,#29901,#29903,.T.); +#29901 = VERTEX_POINT('',#29902); +#29902 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#29903 = LINE('',#29904,#29905); +#29904 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#29905 = VECTOR('',#29906,1.); +#29906 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29907 = ORIENTED_EDGE('',*,*,#29908,.F.); +#29908 = EDGE_CURVE('',#24302,#29901,#29909,.T.); +#29909 = LINE('',#29910,#29911); +#29910 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#29911 = VECTOR('',#29912,1.); +#29912 = DIRECTION('',(0.,-0.,-1.)); +#29913 = ORIENTED_EDGE('',*,*,#24309,.F.); +#29914 = PLANE('',#29915); +#29915 = AXIS2_PLACEMENT_3D('',#29916,#29917,#29918); +#29916 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#29917 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29918 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29919 = ADVANCED_FACE('',(#29920),#29963,.F.); +#29920 = FACE_BOUND('',#29921,.F.); +#29921 = EDGE_LOOP('',(#29922,#29923,#29924,#29932,#29940,#29948,#29956, + #29962)); +#29922 = ORIENTED_EDGE('',*,*,#24326,.F.); +#29923 = ORIENTED_EDGE('',*,*,#29908,.T.); +#29924 = ORIENTED_EDGE('',*,*,#29925,.T.); +#29925 = EDGE_CURVE('',#29901,#29926,#29928,.T.); +#29926 = VERTEX_POINT('',#29927); +#29927 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#29928 = LINE('',#29929,#29930); +#29929 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#29930 = VECTOR('',#29931,1.); +#29931 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29932 = ORIENTED_EDGE('',*,*,#29933,.F.); +#29933 = EDGE_CURVE('',#29934,#29926,#29936,.T.); +#29934 = VERTEX_POINT('',#29935); +#29935 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#29936 = LINE('',#29937,#29938); +#29937 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#29938 = VECTOR('',#29939,1.); +#29939 = DIRECTION('',(-0.,0.,-1.)); +#29940 = ORIENTED_EDGE('',*,*,#29941,.T.); +#29941 = EDGE_CURVE('',#29934,#29942,#29944,.T.); +#29942 = VERTEX_POINT('',#29943); +#29943 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#29944 = LINE('',#29945,#29946); +#29945 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#29946 = VECTOR('',#29947,1.); +#29947 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29948 = ORIENTED_EDGE('',*,*,#29949,.T.); +#29949 = EDGE_CURVE('',#29942,#29950,#29952,.T.); +#29950 = VERTEX_POINT('',#29951); +#29951 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#29952 = LINE('',#29953,#29954); +#29953 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#29954 = VECTOR('',#29955,1.); +#29955 = DIRECTION('',(-0.,0.,-1.)); +#29956 = ORIENTED_EDGE('',*,*,#29957,.T.); +#29957 = EDGE_CURVE('',#29950,#29813,#29958,.T.); +#29958 = LINE('',#29959,#29960); +#29959 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#29960 = VECTOR('',#29961,1.); +#29961 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29962 = ORIENTED_EDGE('',*,*,#29812,.F.); +#29963 = PLANE('',#29964); +#29964 = AXIS2_PLACEMENT_3D('',#29965,#29966,#29967); +#29965 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#29966 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29967 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29968 = ADVANCED_FACE('',(#29969),#29994,.F.); +#29969 = FACE_BOUND('',#29970,.F.); +#29970 = EDGE_LOOP('',(#29971,#29979,#29987,#29993)); +#29971 = ORIENTED_EDGE('',*,*,#29972,.T.); +#29972 = EDGE_CURVE('',#24341,#29973,#29975,.T.); +#29973 = VERTEX_POINT('',#29974); +#29974 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#29975 = LINE('',#29976,#29977); +#29976 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#29977 = VECTOR('',#29978,1.); +#29978 = DIRECTION('',(0.,-0.,-1.)); +#29979 = ORIENTED_EDGE('',*,*,#29980,.T.); +#29980 = EDGE_CURVE('',#29973,#29981,#29983,.T.); +#29981 = VERTEX_POINT('',#29982); +#29982 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#29983 = LINE('',#29984,#29985); +#29984 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#29985 = VECTOR('',#29986,1.); +#29986 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29987 = ORIENTED_EDGE('',*,*,#29988,.F.); +#29988 = EDGE_CURVE('',#24350,#29981,#29989,.T.); +#29989 = LINE('',#29990,#29991); +#29990 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#29991 = VECTOR('',#29992,1.); +#29992 = DIRECTION('',(0.,-0.,-1.)); +#29993 = ORIENTED_EDGE('',*,*,#24357,.F.); +#29994 = PLANE('',#29995); +#29995 = AXIS2_PLACEMENT_3D('',#29996,#29997,#29998); +#29996 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#29997 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29998 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29999 = ADVANCED_FACE('',(#30000),#30050,.F.); +#30000 = FACE_BOUND('',#30001,.F.); +#30001 = EDGE_LOOP('',(#30002,#30003,#30004,#30012,#30020,#30028,#30036, + #30044)); +#30002 = ORIENTED_EDGE('',*,*,#24381,.F.); +#30003 = ORIENTED_EDGE('',*,*,#29988,.T.); +#30004 = ORIENTED_EDGE('',*,*,#30005,.T.); +#30005 = EDGE_CURVE('',#29981,#30006,#30008,.T.); +#30006 = VERTEX_POINT('',#30007); +#30007 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#30008 = LINE('',#30009,#30010); +#30009 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#30010 = VECTOR('',#30011,1.); +#30011 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30012 = ORIENTED_EDGE('',*,*,#30013,.T.); +#30013 = EDGE_CURVE('',#30006,#30014,#30016,.T.); +#30014 = VERTEX_POINT('',#30015); +#30015 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#30016 = LINE('',#30017,#30018); +#30017 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#30018 = VECTOR('',#30019,1.); +#30019 = DIRECTION('',(0.,-0.,1.)); +#30020 = ORIENTED_EDGE('',*,*,#30021,.F.); +#30021 = EDGE_CURVE('',#30022,#30014,#30024,.T.); +#30022 = VERTEX_POINT('',#30023); +#30023 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#30024 = LINE('',#30025,#30026); +#30025 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#30026 = VECTOR('',#30027,1.); +#30027 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30028 = ORIENTED_EDGE('',*,*,#30029,.F.); +#30029 = EDGE_CURVE('',#30030,#30022,#30032,.T.); +#30030 = VERTEX_POINT('',#30031); +#30031 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#30032 = LINE('',#30033,#30034); +#30033 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#30034 = VECTOR('',#30035,1.); +#30035 = DIRECTION('',(0.,-0.,1.)); +#30036 = ORIENTED_EDGE('',*,*,#30037,.T.); +#30037 = EDGE_CURVE('',#30030,#30038,#30040,.T.); +#30038 = VERTEX_POINT('',#30039); +#30039 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#30040 = LINE('',#30041,#30042); +#30041 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#30042 = VECTOR('',#30043,1.); +#30043 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30044 = ORIENTED_EDGE('',*,*,#30045,.F.); +#30045 = EDGE_CURVE('',#24374,#30038,#30046,.T.); +#30046 = LINE('',#30047,#30048); +#30047 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#30048 = VECTOR('',#30049,1.); +#30049 = DIRECTION('',(0.,-0.,-1.)); +#30050 = PLANE('',#30051); +#30051 = AXIS2_PLACEMENT_3D('',#30052,#30053,#30054); +#30052 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#30053 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30054 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30055 = ADVANCED_FACE('',(#30056),#30074,.F.); +#30056 = FACE_BOUND('',#30057,.F.); +#30057 = EDGE_LOOP('',(#30058,#30059,#30067,#30073)); +#30058 = ORIENTED_EDGE('',*,*,#30045,.T.); +#30059 = ORIENTED_EDGE('',*,*,#30060,.T.); +#30060 = EDGE_CURVE('',#30038,#30061,#30063,.T.); +#30061 = VERTEX_POINT('',#30062); +#30062 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#30063 = LINE('',#30064,#30065); +#30064 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#30065 = VECTOR('',#30066,1.); +#30066 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30067 = ORIENTED_EDGE('',*,*,#30068,.F.); +#30068 = EDGE_CURVE('',#24398,#30061,#30069,.T.); +#30069 = LINE('',#30070,#30071); +#30070 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#30071 = VECTOR('',#30072,1.); +#30072 = DIRECTION('',(0.,-0.,-1.)); +#30073 = ORIENTED_EDGE('',*,*,#24405,.F.); +#30074 = PLANE('',#30075); +#30075 = AXIS2_PLACEMENT_3D('',#30076,#30077,#30078); +#30076 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#30077 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30078 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30079 = ADVANCED_FACE('',(#30080),#30123,.F.); +#30080 = FACE_BOUND('',#30081,.F.); +#30081 = EDGE_LOOP('',(#30082,#30083,#30084,#30092,#30100,#30108,#30116, + #30122)); +#30082 = ORIENTED_EDGE('',*,*,#24422,.F.); +#30083 = ORIENTED_EDGE('',*,*,#30068,.T.); +#30084 = ORIENTED_EDGE('',*,*,#30085,.T.); +#30085 = EDGE_CURVE('',#30061,#30086,#30088,.T.); +#30086 = VERTEX_POINT('',#30087); +#30087 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#30088 = LINE('',#30089,#30090); +#30089 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#30090 = VECTOR('',#30091,1.); +#30091 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30092 = ORIENTED_EDGE('',*,*,#30093,.F.); +#30093 = EDGE_CURVE('',#30094,#30086,#30096,.T.); +#30094 = VERTEX_POINT('',#30095); +#30095 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#30096 = LINE('',#30097,#30098); +#30097 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#30098 = VECTOR('',#30099,1.); +#30099 = DIRECTION('',(-0.,0.,-1.)); +#30100 = ORIENTED_EDGE('',*,*,#30101,.T.); +#30101 = EDGE_CURVE('',#30094,#30102,#30104,.T.); +#30102 = VERTEX_POINT('',#30103); +#30103 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#30104 = LINE('',#30105,#30106); +#30105 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#30106 = VECTOR('',#30107,1.); +#30107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30108 = ORIENTED_EDGE('',*,*,#30109,.T.); +#30109 = EDGE_CURVE('',#30102,#30110,#30112,.T.); +#30110 = VERTEX_POINT('',#30111); +#30111 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#30112 = LINE('',#30113,#30114); +#30113 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#30114 = VECTOR('',#30115,1.); +#30115 = DIRECTION('',(-0.,0.,-1.)); +#30116 = ORIENTED_EDGE('',*,*,#30117,.T.); +#30117 = EDGE_CURVE('',#30110,#29973,#30118,.T.); +#30118 = LINE('',#30119,#30120); +#30119 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#30120 = VECTOR('',#30121,1.); +#30121 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30122 = ORIENTED_EDGE('',*,*,#29972,.F.); +#30123 = PLANE('',#30124); +#30124 = AXIS2_PLACEMENT_3D('',#30125,#30126,#30127); +#30125 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#30126 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30127 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30128 = ADVANCED_FACE('',(#30129),#30154,.F.); +#30129 = FACE_BOUND('',#30130,.F.); +#30130 = EDGE_LOOP('',(#30131,#30139,#30147,#30153)); +#30131 = ORIENTED_EDGE('',*,*,#30132,.T.); +#30132 = EDGE_CURVE('',#24437,#30133,#30135,.T.); +#30133 = VERTEX_POINT('',#30134); +#30134 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#30135 = LINE('',#30136,#30137); +#30136 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#30137 = VECTOR('',#30138,1.); +#30138 = DIRECTION('',(0.,-0.,-1.)); +#30139 = ORIENTED_EDGE('',*,*,#30140,.T.); +#30140 = EDGE_CURVE('',#30133,#30141,#30143,.T.); +#30141 = VERTEX_POINT('',#30142); +#30142 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#30143 = LINE('',#30144,#30145); +#30144 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#30145 = VECTOR('',#30146,1.); +#30146 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30147 = ORIENTED_EDGE('',*,*,#30148,.F.); +#30148 = EDGE_CURVE('',#24446,#30141,#30149,.T.); +#30149 = LINE('',#30150,#30151); +#30150 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#30151 = VECTOR('',#30152,1.); +#30152 = DIRECTION('',(0.,-0.,-1.)); +#30153 = ORIENTED_EDGE('',*,*,#24453,.F.); +#30154 = PLANE('',#30155); +#30155 = AXIS2_PLACEMENT_3D('',#30156,#30157,#30158); +#30156 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#30157 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30158 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30159 = ADVANCED_FACE('',(#30160),#30210,.F.); +#30160 = FACE_BOUND('',#30161,.F.); +#30161 = EDGE_LOOP('',(#30162,#30163,#30164,#30172,#30180,#30188,#30196, + #30204)); +#30162 = ORIENTED_EDGE('',*,*,#24477,.F.); +#30163 = ORIENTED_EDGE('',*,*,#30148,.T.); +#30164 = ORIENTED_EDGE('',*,*,#30165,.T.); +#30165 = EDGE_CURVE('',#30141,#30166,#30168,.T.); +#30166 = VERTEX_POINT('',#30167); +#30167 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#30168 = LINE('',#30169,#30170); +#30169 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#30170 = VECTOR('',#30171,1.); +#30171 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30172 = ORIENTED_EDGE('',*,*,#30173,.T.); +#30173 = EDGE_CURVE('',#30166,#30174,#30176,.T.); +#30174 = VERTEX_POINT('',#30175); +#30175 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#30176 = LINE('',#30177,#30178); +#30177 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#30178 = VECTOR('',#30179,1.); +#30179 = DIRECTION('',(0.,-0.,1.)); +#30180 = ORIENTED_EDGE('',*,*,#30181,.F.); +#30181 = EDGE_CURVE('',#30182,#30174,#30184,.T.); +#30182 = VERTEX_POINT('',#30183); +#30183 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#30184 = LINE('',#30185,#30186); +#30185 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#30186 = VECTOR('',#30187,1.); +#30187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30188 = ORIENTED_EDGE('',*,*,#30189,.F.); +#30189 = EDGE_CURVE('',#30190,#30182,#30192,.T.); +#30190 = VERTEX_POINT('',#30191); +#30191 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#30192 = LINE('',#30193,#30194); +#30193 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#30194 = VECTOR('',#30195,1.); +#30195 = DIRECTION('',(0.,-0.,1.)); +#30196 = ORIENTED_EDGE('',*,*,#30197,.T.); +#30197 = EDGE_CURVE('',#30190,#30198,#30200,.T.); +#30198 = VERTEX_POINT('',#30199); +#30199 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#30200 = LINE('',#30201,#30202); +#30201 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#30202 = VECTOR('',#30203,1.); +#30203 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30204 = ORIENTED_EDGE('',*,*,#30205,.F.); +#30205 = EDGE_CURVE('',#24470,#30198,#30206,.T.); +#30206 = LINE('',#30207,#30208); +#30207 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#30208 = VECTOR('',#30209,1.); +#30209 = DIRECTION('',(0.,-0.,-1.)); +#30210 = PLANE('',#30211); +#30211 = AXIS2_PLACEMENT_3D('',#30212,#30213,#30214); +#30212 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#30213 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30214 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30215 = ADVANCED_FACE('',(#30216),#30234,.F.); +#30216 = FACE_BOUND('',#30217,.F.); +#30217 = EDGE_LOOP('',(#30218,#30219,#30227,#30233)); +#30218 = ORIENTED_EDGE('',*,*,#30205,.T.); +#30219 = ORIENTED_EDGE('',*,*,#30220,.T.); +#30220 = EDGE_CURVE('',#30198,#30221,#30223,.T.); +#30221 = VERTEX_POINT('',#30222); +#30222 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#30223 = LINE('',#30224,#30225); +#30224 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#30225 = VECTOR('',#30226,1.); +#30226 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30227 = ORIENTED_EDGE('',*,*,#30228,.F.); +#30228 = EDGE_CURVE('',#24494,#30221,#30229,.T.); +#30229 = LINE('',#30230,#30231); +#30230 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#30231 = VECTOR('',#30232,1.); +#30232 = DIRECTION('',(0.,-0.,-1.)); +#30233 = ORIENTED_EDGE('',*,*,#24501,.F.); +#30234 = PLANE('',#30235); +#30235 = AXIS2_PLACEMENT_3D('',#30236,#30237,#30238); +#30236 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#30237 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#30238 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30239 = ADVANCED_FACE('',(#30240),#30283,.F.); +#30240 = FACE_BOUND('',#30241,.F.); +#30241 = EDGE_LOOP('',(#30242,#30243,#30244,#30252,#30260,#30268,#30276, + #30282)); +#30242 = ORIENTED_EDGE('',*,*,#24518,.F.); +#30243 = ORIENTED_EDGE('',*,*,#30228,.T.); +#30244 = ORIENTED_EDGE('',*,*,#30245,.T.); +#30245 = EDGE_CURVE('',#30221,#30246,#30248,.T.); +#30246 = VERTEX_POINT('',#30247); +#30247 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#30248 = LINE('',#30249,#30250); +#30249 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#30250 = VECTOR('',#30251,1.); +#30251 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30252 = ORIENTED_EDGE('',*,*,#30253,.F.); +#30253 = EDGE_CURVE('',#30254,#30246,#30256,.T.); +#30254 = VERTEX_POINT('',#30255); +#30255 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#30256 = LINE('',#30257,#30258); +#30257 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#30258 = VECTOR('',#30259,1.); +#30259 = DIRECTION('',(-0.,0.,-1.)); +#30260 = ORIENTED_EDGE('',*,*,#30261,.T.); +#30261 = EDGE_CURVE('',#30254,#30262,#30264,.T.); +#30262 = VERTEX_POINT('',#30263); +#30263 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#30264 = LINE('',#30265,#30266); +#30265 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#30266 = VECTOR('',#30267,1.); +#30267 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30268 = ORIENTED_EDGE('',*,*,#30269,.T.); +#30269 = EDGE_CURVE('',#30262,#30270,#30272,.T.); +#30270 = VERTEX_POINT('',#30271); +#30271 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#30272 = LINE('',#30273,#30274); +#30273 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#30274 = VECTOR('',#30275,1.); +#30275 = DIRECTION('',(-0.,0.,-1.)); +#30276 = ORIENTED_EDGE('',*,*,#30277,.T.); +#30277 = EDGE_CURVE('',#30270,#30133,#30278,.T.); +#30278 = LINE('',#30279,#30280); +#30279 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#30280 = VECTOR('',#30281,1.); +#30281 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30282 = ORIENTED_EDGE('',*,*,#30132,.F.); +#30283 = PLANE('',#30284); +#30284 = AXIS2_PLACEMENT_3D('',#30285,#30286,#30287); +#30285 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#30286 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30287 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30288 = ADVANCED_FACE('',(#30289),#30300,.T.); +#30289 = FACE_BOUND('',#30290,.T.); +#30290 = EDGE_LOOP('',(#30291,#30297,#30298,#30299)); +#30291 = ORIENTED_EDGE('',*,*,#30292,.T.); +#30292 = EDGE_CURVE('',#24614,#24550,#30293,.T.); +#30293 = LINE('',#30294,#30295); +#30294 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#30295 = VECTOR('',#30296,1.); +#30296 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30297 = ORIENTED_EDGE('',*,*,#24549,.T.); +#30298 = ORIENTED_EDGE('',*,*,#24534,.F.); +#30299 = ORIENTED_EDGE('',*,*,#24613,.F.); +#30300 = PLANE('',#30301); +#30301 = AXIS2_PLACEMENT_3D('',#30302,#30303,#30304); +#30302 = CARTESIAN_POINT('',(-0.1,-48.56,-2.5)); +#30303 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30304 = DIRECTION('',(0.,0.,1.)); +#30305 = ADVANCED_FACE('',(#30306),#30317,.T.); +#30306 = FACE_BOUND('',#30307,.T.); +#30307 = EDGE_LOOP('',(#30308,#30314,#30315,#30316)); +#30308 = ORIENTED_EDGE('',*,*,#30309,.T.); +#30309 = EDGE_CURVE('',#24639,#24575,#30310,.T.); +#30310 = LINE('',#30311,#30312); +#30311 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#30312 = VECTOR('',#30313,1.); +#30313 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30314 = ORIENTED_EDGE('',*,*,#24582,.T.); +#30315 = ORIENTED_EDGE('',*,*,#30292,.F.); +#30316 = ORIENTED_EDGE('',*,*,#24646,.F.); +#30317 = PLANE('',#30318); +#30318 = AXIS2_PLACEMENT_3D('',#30319,#30320,#30321); +#30319 = CARTESIAN_POINT('',(-0.1,-48.41,-3.1)); +#30320 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30321 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30322 = ADVANCED_FACE('',(#30323),#30334,.T.); +#30323 = FACE_BOUND('',#30324,.T.); +#30324 = EDGE_LOOP('',(#30325,#30331,#30332,#30333)); +#30325 = ORIENTED_EDGE('',*,*,#30326,.T.); +#30326 = EDGE_CURVE('',#24631,#24567,#30327,.T.); +#30327 = LINE('',#30328,#30329); +#30328 = CARTESIAN_POINT('',(-0.1,-48.11,-3.1)); +#30329 = VECTOR('',#30330,1.); +#30330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30331 = ORIENTED_EDGE('',*,*,#24574,.T.); +#30332 = ORIENTED_EDGE('',*,*,#30309,.F.); +#30333 = ORIENTED_EDGE('',*,*,#24638,.T.); +#30334 = PLANE('',#30335); +#30335 = AXIS2_PLACEMENT_3D('',#30336,#30337,#30338); +#30336 = CARTESIAN_POINT('',(-0.1,-48.11,-3.1)); +#30337 = DIRECTION('',(0.,-0.,-1.)); +#30338 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30339 = ADVANCED_FACE('',(#30340),#30351,.T.); +#30340 = FACE_BOUND('',#30341,.T.); +#30341 = EDGE_LOOP('',(#30342,#30348,#30349,#30350)); +#30342 = ORIENTED_EDGE('',*,*,#30343,.T.); +#30343 = EDGE_CURVE('',#24623,#24559,#30344,.T.); +#30344 = LINE('',#30345,#30346); +#30345 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#30346 = VECTOR('',#30347,1.); +#30347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30348 = ORIENTED_EDGE('',*,*,#24566,.T.); +#30349 = ORIENTED_EDGE('',*,*,#30326,.F.); +#30350 = ORIENTED_EDGE('',*,*,#24630,.F.); +#30351 = PLANE('',#30352); +#30352 = AXIS2_PLACEMENT_3D('',#30353,#30354,#30355); +#30353 = CARTESIAN_POINT('',(-0.1,-47.96,-2.5)); +#30354 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30355 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30356 = ADVANCED_FACE('',(#30357),#30363,.T.); +#30357 = FACE_BOUND('',#30358,.T.); +#30358 = EDGE_LOOP('',(#30359,#30360,#30361,#30362)); +#30359 = ORIENTED_EDGE('',*,*,#24596,.T.); +#30360 = ORIENTED_EDGE('',*,*,#24558,.T.); +#30361 = ORIENTED_EDGE('',*,*,#30343,.F.); +#30362 = ORIENTED_EDGE('',*,*,#24622,.F.); +#30363 = PLANE('',#30364); +#30364 = AXIS2_PLACEMENT_3D('',#30365,#30366,#30367); +#30365 = CARTESIAN_POINT('',(-0.1,-47.96,0.2)); +#30366 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30367 = DIRECTION('',(0.,0.,-1.)); +#30368 = ADVANCED_FACE('',(#30369),#30380,.T.); +#30369 = FACE_BOUND('',#30370,.T.); +#30370 = EDGE_LOOP('',(#30371,#30377,#30378,#30379)); +#30371 = ORIENTED_EDGE('',*,*,#30372,.T.); +#30372 = EDGE_CURVE('',#24742,#24678,#30373,.T.); +#30373 = LINE('',#30374,#30375); +#30374 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#30375 = VECTOR('',#30376,1.); +#30376 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30377 = ORIENTED_EDGE('',*,*,#24677,.T.); +#30378 = ORIENTED_EDGE('',*,*,#24662,.F.); +#30379 = ORIENTED_EDGE('',*,*,#24741,.F.); +#30380 = PLANE('',#30381); +#30381 = AXIS2_PLACEMENT_3D('',#30382,#30383,#30384); +#30382 = CARTESIAN_POINT('',(-0.1,-46.02,-2.5)); +#30383 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30384 = DIRECTION('',(0.,0.,1.)); +#30385 = ADVANCED_FACE('',(#30386),#30397,.T.); +#30386 = FACE_BOUND('',#30387,.T.); +#30387 = EDGE_LOOP('',(#30388,#30394,#30395,#30396)); +#30388 = ORIENTED_EDGE('',*,*,#30389,.T.); +#30389 = EDGE_CURVE('',#24767,#24703,#30390,.T.); +#30390 = LINE('',#30391,#30392); +#30391 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#30392 = VECTOR('',#30393,1.); +#30393 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30394 = ORIENTED_EDGE('',*,*,#24710,.T.); +#30395 = ORIENTED_EDGE('',*,*,#30372,.F.); +#30396 = ORIENTED_EDGE('',*,*,#24774,.F.); +#30397 = PLANE('',#30398); +#30398 = AXIS2_PLACEMENT_3D('',#30399,#30400,#30401); +#30399 = CARTESIAN_POINT('',(-0.1,-45.87,-3.1)); +#30400 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30401 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30402 = ADVANCED_FACE('',(#30403),#30414,.T.); +#30403 = FACE_BOUND('',#30404,.T.); +#30404 = EDGE_LOOP('',(#30405,#30411,#30412,#30413)); +#30405 = ORIENTED_EDGE('',*,*,#30406,.T.); +#30406 = EDGE_CURVE('',#24759,#24695,#30407,.T.); +#30407 = LINE('',#30408,#30409); +#30408 = CARTESIAN_POINT('',(-0.1,-45.57,-3.1)); +#30409 = VECTOR('',#30410,1.); +#30410 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30411 = ORIENTED_EDGE('',*,*,#24702,.T.); +#30412 = ORIENTED_EDGE('',*,*,#30389,.F.); +#30413 = ORIENTED_EDGE('',*,*,#24766,.T.); +#30414 = PLANE('',#30415); +#30415 = AXIS2_PLACEMENT_3D('',#30416,#30417,#30418); +#30416 = CARTESIAN_POINT('',(-0.1,-45.57,-3.1)); +#30417 = DIRECTION('',(0.,-0.,-1.)); +#30418 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30419 = ADVANCED_FACE('',(#30420),#30431,.T.); +#30420 = FACE_BOUND('',#30421,.T.); +#30421 = EDGE_LOOP('',(#30422,#30428,#30429,#30430)); +#30422 = ORIENTED_EDGE('',*,*,#30423,.T.); +#30423 = EDGE_CURVE('',#24751,#24687,#30424,.T.); +#30424 = LINE('',#30425,#30426); +#30425 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#30426 = VECTOR('',#30427,1.); +#30427 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30428 = ORIENTED_EDGE('',*,*,#24694,.T.); +#30429 = ORIENTED_EDGE('',*,*,#30406,.F.); +#30430 = ORIENTED_EDGE('',*,*,#24758,.F.); +#30431 = PLANE('',#30432); +#30432 = AXIS2_PLACEMENT_3D('',#30433,#30434,#30435); +#30433 = CARTESIAN_POINT('',(-0.1,-45.42,-2.5)); +#30434 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30435 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30436 = ADVANCED_FACE('',(#30437),#30443,.T.); +#30437 = FACE_BOUND('',#30438,.T.); +#30438 = EDGE_LOOP('',(#30439,#30440,#30441,#30442)); +#30439 = ORIENTED_EDGE('',*,*,#24724,.T.); +#30440 = ORIENTED_EDGE('',*,*,#24686,.T.); +#30441 = ORIENTED_EDGE('',*,*,#30423,.F.); +#30442 = ORIENTED_EDGE('',*,*,#24750,.F.); +#30443 = PLANE('',#30444); +#30444 = AXIS2_PLACEMENT_3D('',#30445,#30446,#30447); +#30445 = CARTESIAN_POINT('',(-0.1,-45.42,0.2)); +#30446 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30447 = DIRECTION('',(0.,0.,-1.)); +#30448 = ADVANCED_FACE('',(#30449),#30460,.T.); +#30449 = FACE_BOUND('',#30450,.T.); +#30450 = EDGE_LOOP('',(#30451,#30457,#30458,#30459)); +#30451 = ORIENTED_EDGE('',*,*,#30452,.T.); +#30452 = EDGE_CURVE('',#24870,#24806,#30453,.T.); +#30453 = LINE('',#30454,#30455); +#30454 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#30455 = VECTOR('',#30456,1.); +#30456 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30457 = ORIENTED_EDGE('',*,*,#24805,.T.); +#30458 = ORIENTED_EDGE('',*,*,#24790,.F.); +#30459 = ORIENTED_EDGE('',*,*,#24869,.F.); +#30460 = PLANE('',#30461); +#30461 = AXIS2_PLACEMENT_3D('',#30462,#30463,#30464); +#30462 = CARTESIAN_POINT('',(-0.1,-43.48,-2.5)); +#30463 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30464 = DIRECTION('',(0.,0.,1.)); +#30465 = ADVANCED_FACE('',(#30466),#30477,.T.); +#30466 = FACE_BOUND('',#30467,.T.); +#30467 = EDGE_LOOP('',(#30468,#30474,#30475,#30476)); +#30468 = ORIENTED_EDGE('',*,*,#30469,.T.); +#30469 = EDGE_CURVE('',#24895,#24831,#30470,.T.); +#30470 = LINE('',#30471,#30472); +#30471 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#30472 = VECTOR('',#30473,1.); +#30473 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30474 = ORIENTED_EDGE('',*,*,#24838,.T.); +#30475 = ORIENTED_EDGE('',*,*,#30452,.F.); +#30476 = ORIENTED_EDGE('',*,*,#24902,.F.); +#30477 = PLANE('',#30478); +#30478 = AXIS2_PLACEMENT_3D('',#30479,#30480,#30481); +#30479 = CARTESIAN_POINT('',(-0.1,-43.33,-3.1)); +#30480 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30481 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30482 = ADVANCED_FACE('',(#30483),#30494,.T.); +#30483 = FACE_BOUND('',#30484,.T.); +#30484 = EDGE_LOOP('',(#30485,#30491,#30492,#30493)); +#30485 = ORIENTED_EDGE('',*,*,#30486,.T.); +#30486 = EDGE_CURVE('',#24887,#24823,#30487,.T.); +#30487 = LINE('',#30488,#30489); +#30488 = CARTESIAN_POINT('',(-0.1,-43.03,-3.1)); +#30489 = VECTOR('',#30490,1.); +#30490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30491 = ORIENTED_EDGE('',*,*,#24830,.T.); +#30492 = ORIENTED_EDGE('',*,*,#30469,.F.); +#30493 = ORIENTED_EDGE('',*,*,#24894,.T.); +#30494 = PLANE('',#30495); +#30495 = AXIS2_PLACEMENT_3D('',#30496,#30497,#30498); +#30496 = CARTESIAN_POINT('',(-0.1,-43.03,-3.1)); +#30497 = DIRECTION('',(0.,-0.,-1.)); +#30498 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30499 = ADVANCED_FACE('',(#30500),#30511,.T.); +#30500 = FACE_BOUND('',#30501,.T.); +#30501 = EDGE_LOOP('',(#30502,#30508,#30509,#30510)); +#30502 = ORIENTED_EDGE('',*,*,#30503,.T.); +#30503 = EDGE_CURVE('',#24879,#24815,#30504,.T.); +#30504 = LINE('',#30505,#30506); +#30505 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#30506 = VECTOR('',#30507,1.); +#30507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30508 = ORIENTED_EDGE('',*,*,#24822,.T.); +#30509 = ORIENTED_EDGE('',*,*,#30486,.F.); +#30510 = ORIENTED_EDGE('',*,*,#24886,.F.); +#30511 = PLANE('',#30512); +#30512 = AXIS2_PLACEMENT_3D('',#30513,#30514,#30515); +#30513 = CARTESIAN_POINT('',(-0.1,-42.88,-2.5)); +#30514 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30515 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30516 = ADVANCED_FACE('',(#30517),#30523,.T.); +#30517 = FACE_BOUND('',#30518,.T.); +#30518 = EDGE_LOOP('',(#30519,#30520,#30521,#30522)); +#30519 = ORIENTED_EDGE('',*,*,#24852,.T.); +#30520 = ORIENTED_EDGE('',*,*,#24814,.T.); +#30521 = ORIENTED_EDGE('',*,*,#30503,.F.); +#30522 = ORIENTED_EDGE('',*,*,#24878,.F.); +#30523 = PLANE('',#30524); +#30524 = AXIS2_PLACEMENT_3D('',#30525,#30526,#30527); +#30525 = CARTESIAN_POINT('',(-0.1,-42.88,0.2)); +#30526 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30527 = DIRECTION('',(0.,0.,-1.)); +#30528 = ADVANCED_FACE('',(#30529),#30540,.T.); +#30529 = FACE_BOUND('',#30530,.T.); +#30530 = EDGE_LOOP('',(#30531,#30537,#30538,#30539)); +#30531 = ORIENTED_EDGE('',*,*,#30532,.T.); +#30532 = EDGE_CURVE('',#24998,#24934,#30533,.T.); +#30533 = LINE('',#30534,#30535); +#30534 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#30535 = VECTOR('',#30536,1.); +#30536 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30537 = ORIENTED_EDGE('',*,*,#24933,.T.); +#30538 = ORIENTED_EDGE('',*,*,#24918,.F.); +#30539 = ORIENTED_EDGE('',*,*,#24997,.F.); +#30540 = PLANE('',#30541); +#30541 = AXIS2_PLACEMENT_3D('',#30542,#30543,#30544); +#30542 = CARTESIAN_POINT('',(-0.1,-40.94,-2.5)); +#30543 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30544 = DIRECTION('',(0.,0.,1.)); +#30545 = ADVANCED_FACE('',(#30546),#30557,.T.); +#30546 = FACE_BOUND('',#30547,.T.); +#30547 = EDGE_LOOP('',(#30548,#30554,#30555,#30556)); +#30548 = ORIENTED_EDGE('',*,*,#30549,.T.); +#30549 = EDGE_CURVE('',#25023,#24959,#30550,.T.); +#30550 = LINE('',#30551,#30552); +#30551 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#30552 = VECTOR('',#30553,1.); +#30553 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30554 = ORIENTED_EDGE('',*,*,#24966,.T.); +#30555 = ORIENTED_EDGE('',*,*,#30532,.F.); +#30556 = ORIENTED_EDGE('',*,*,#25030,.F.); +#30557 = PLANE('',#30558); +#30558 = AXIS2_PLACEMENT_3D('',#30559,#30560,#30561); +#30559 = CARTESIAN_POINT('',(-0.1,-40.79,-3.1)); +#30560 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30561 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30562 = ADVANCED_FACE('',(#30563),#30574,.T.); +#30563 = FACE_BOUND('',#30564,.T.); +#30564 = EDGE_LOOP('',(#30565,#30571,#30572,#30573)); +#30565 = ORIENTED_EDGE('',*,*,#30566,.T.); +#30566 = EDGE_CURVE('',#25015,#24951,#30567,.T.); +#30567 = LINE('',#30568,#30569); +#30568 = CARTESIAN_POINT('',(-0.1,-40.49,-3.1)); +#30569 = VECTOR('',#30570,1.); +#30570 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30571 = ORIENTED_EDGE('',*,*,#24958,.T.); +#30572 = ORIENTED_EDGE('',*,*,#30549,.F.); +#30573 = ORIENTED_EDGE('',*,*,#25022,.T.); +#30574 = PLANE('',#30575); +#30575 = AXIS2_PLACEMENT_3D('',#30576,#30577,#30578); +#30576 = CARTESIAN_POINT('',(-0.1,-40.49,-3.1)); +#30577 = DIRECTION('',(0.,-0.,-1.)); +#30578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30579 = ADVANCED_FACE('',(#30580),#30591,.T.); +#30580 = FACE_BOUND('',#30581,.T.); +#30581 = EDGE_LOOP('',(#30582,#30588,#30589,#30590)); +#30582 = ORIENTED_EDGE('',*,*,#30583,.T.); +#30583 = EDGE_CURVE('',#25007,#24943,#30584,.T.); +#30584 = LINE('',#30585,#30586); +#30585 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#30586 = VECTOR('',#30587,1.); +#30587 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30588 = ORIENTED_EDGE('',*,*,#24950,.T.); +#30589 = ORIENTED_EDGE('',*,*,#30566,.F.); +#30590 = ORIENTED_EDGE('',*,*,#25014,.F.); +#30591 = PLANE('',#30592); +#30592 = AXIS2_PLACEMENT_3D('',#30593,#30594,#30595); +#30593 = CARTESIAN_POINT('',(-0.1,-40.34,-2.5)); +#30594 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30595 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30596 = ADVANCED_FACE('',(#30597),#30603,.T.); +#30597 = FACE_BOUND('',#30598,.T.); +#30598 = EDGE_LOOP('',(#30599,#30600,#30601,#30602)); +#30599 = ORIENTED_EDGE('',*,*,#24980,.T.); +#30600 = ORIENTED_EDGE('',*,*,#24942,.T.); +#30601 = ORIENTED_EDGE('',*,*,#30583,.F.); +#30602 = ORIENTED_EDGE('',*,*,#25006,.F.); +#30603 = PLANE('',#30604); +#30604 = AXIS2_PLACEMENT_3D('',#30605,#30606,#30607); +#30605 = CARTESIAN_POINT('',(-0.1,-40.34,0.2)); +#30606 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30607 = DIRECTION('',(0.,0.,-1.)); +#30608 = ADVANCED_FACE('',(#30609),#30620,.T.); +#30609 = FACE_BOUND('',#30610,.T.); +#30610 = EDGE_LOOP('',(#30611,#30617,#30618,#30619)); +#30611 = ORIENTED_EDGE('',*,*,#30612,.T.); +#30612 = EDGE_CURVE('',#25126,#25062,#30613,.T.); +#30613 = LINE('',#30614,#30615); +#30614 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#30615 = VECTOR('',#30616,1.); +#30616 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30617 = ORIENTED_EDGE('',*,*,#25061,.T.); +#30618 = ORIENTED_EDGE('',*,*,#25046,.F.); +#30619 = ORIENTED_EDGE('',*,*,#25125,.F.); +#30620 = PLANE('',#30621); +#30621 = AXIS2_PLACEMENT_3D('',#30622,#30623,#30624); +#30622 = CARTESIAN_POINT('',(-0.1,-38.4,-2.5)); +#30623 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30624 = DIRECTION('',(0.,0.,1.)); +#30625 = ADVANCED_FACE('',(#30626),#30637,.T.); +#30626 = FACE_BOUND('',#30627,.T.); +#30627 = EDGE_LOOP('',(#30628,#30634,#30635,#30636)); +#30628 = ORIENTED_EDGE('',*,*,#30629,.T.); +#30629 = EDGE_CURVE('',#25151,#25087,#30630,.T.); +#30630 = LINE('',#30631,#30632); +#30631 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#30632 = VECTOR('',#30633,1.); +#30633 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30634 = ORIENTED_EDGE('',*,*,#25094,.T.); +#30635 = ORIENTED_EDGE('',*,*,#30612,.F.); +#30636 = ORIENTED_EDGE('',*,*,#25158,.F.); +#30637 = PLANE('',#30638); +#30638 = AXIS2_PLACEMENT_3D('',#30639,#30640,#30641); +#30639 = CARTESIAN_POINT('',(-0.1,-38.25,-3.1)); +#30640 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30641 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30642 = ADVANCED_FACE('',(#30643),#30654,.T.); +#30643 = FACE_BOUND('',#30644,.T.); +#30644 = EDGE_LOOP('',(#30645,#30651,#30652,#30653)); +#30645 = ORIENTED_EDGE('',*,*,#30646,.T.); +#30646 = EDGE_CURVE('',#25143,#25079,#30647,.T.); +#30647 = LINE('',#30648,#30649); +#30648 = CARTESIAN_POINT('',(-0.1,-37.95,-3.1)); +#30649 = VECTOR('',#30650,1.); +#30650 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30651 = ORIENTED_EDGE('',*,*,#25086,.T.); +#30652 = ORIENTED_EDGE('',*,*,#30629,.F.); +#30653 = ORIENTED_EDGE('',*,*,#25150,.T.); +#30654 = PLANE('',#30655); +#30655 = AXIS2_PLACEMENT_3D('',#30656,#30657,#30658); +#30656 = CARTESIAN_POINT('',(-0.1,-37.95,-3.1)); +#30657 = DIRECTION('',(0.,-0.,-1.)); +#30658 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30659 = ADVANCED_FACE('',(#30660),#30671,.T.); +#30660 = FACE_BOUND('',#30661,.T.); +#30661 = EDGE_LOOP('',(#30662,#30668,#30669,#30670)); +#30662 = ORIENTED_EDGE('',*,*,#30663,.T.); +#30663 = EDGE_CURVE('',#25135,#25071,#30664,.T.); +#30664 = LINE('',#30665,#30666); +#30665 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#30666 = VECTOR('',#30667,1.); +#30667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30668 = ORIENTED_EDGE('',*,*,#25078,.T.); +#30669 = ORIENTED_EDGE('',*,*,#30646,.F.); +#30670 = ORIENTED_EDGE('',*,*,#25142,.F.); +#30671 = PLANE('',#30672); +#30672 = AXIS2_PLACEMENT_3D('',#30673,#30674,#30675); +#30673 = CARTESIAN_POINT('',(-0.1,-37.8,-2.5)); +#30674 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30675 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30676 = ADVANCED_FACE('',(#30677),#30683,.T.); +#30677 = FACE_BOUND('',#30678,.T.); +#30678 = EDGE_LOOP('',(#30679,#30680,#30681,#30682)); +#30679 = ORIENTED_EDGE('',*,*,#25108,.T.); +#30680 = ORIENTED_EDGE('',*,*,#25070,.T.); +#30681 = ORIENTED_EDGE('',*,*,#30663,.F.); +#30682 = ORIENTED_EDGE('',*,*,#25134,.F.); +#30683 = PLANE('',#30684); +#30684 = AXIS2_PLACEMENT_3D('',#30685,#30686,#30687); +#30685 = CARTESIAN_POINT('',(-0.1,-37.8,0.2)); +#30686 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30687 = DIRECTION('',(0.,0.,-1.)); +#30688 = ADVANCED_FACE('',(#30689),#30700,.T.); +#30689 = FACE_BOUND('',#30690,.T.); +#30690 = EDGE_LOOP('',(#30691,#30697,#30698,#30699)); +#30691 = ORIENTED_EDGE('',*,*,#30692,.T.); +#30692 = EDGE_CURVE('',#25254,#25190,#30693,.T.); +#30693 = LINE('',#30694,#30695); +#30694 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#30695 = VECTOR('',#30696,1.); +#30696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30697 = ORIENTED_EDGE('',*,*,#25189,.T.); +#30698 = ORIENTED_EDGE('',*,*,#25174,.F.); +#30699 = ORIENTED_EDGE('',*,*,#25253,.F.); +#30700 = PLANE('',#30701); +#30701 = AXIS2_PLACEMENT_3D('',#30702,#30703,#30704); +#30702 = CARTESIAN_POINT('',(-0.1,-35.86,-2.5)); +#30703 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30704 = DIRECTION('',(0.,0.,1.)); +#30705 = ADVANCED_FACE('',(#30706),#30717,.T.); +#30706 = FACE_BOUND('',#30707,.T.); +#30707 = EDGE_LOOP('',(#30708,#30714,#30715,#30716)); +#30708 = ORIENTED_EDGE('',*,*,#30709,.T.); +#30709 = EDGE_CURVE('',#25279,#25215,#30710,.T.); +#30710 = LINE('',#30711,#30712); +#30711 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#30712 = VECTOR('',#30713,1.); +#30713 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30714 = ORIENTED_EDGE('',*,*,#25222,.T.); +#30715 = ORIENTED_EDGE('',*,*,#30692,.F.); +#30716 = ORIENTED_EDGE('',*,*,#25286,.F.); +#30717 = PLANE('',#30718); +#30718 = AXIS2_PLACEMENT_3D('',#30719,#30720,#30721); +#30719 = CARTESIAN_POINT('',(-0.1,-35.71,-3.1)); +#30720 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30721 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30722 = ADVANCED_FACE('',(#30723),#30734,.T.); +#30723 = FACE_BOUND('',#30724,.T.); +#30724 = EDGE_LOOP('',(#30725,#30731,#30732,#30733)); +#30725 = ORIENTED_EDGE('',*,*,#30726,.T.); +#30726 = EDGE_CURVE('',#25271,#25207,#30727,.T.); +#30727 = LINE('',#30728,#30729); +#30728 = CARTESIAN_POINT('',(-0.1,-35.41,-3.1)); +#30729 = VECTOR('',#30730,1.); +#30730 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30731 = ORIENTED_EDGE('',*,*,#25214,.T.); +#30732 = ORIENTED_EDGE('',*,*,#30709,.F.); +#30733 = ORIENTED_EDGE('',*,*,#25278,.T.); +#30734 = PLANE('',#30735); +#30735 = AXIS2_PLACEMENT_3D('',#30736,#30737,#30738); +#30736 = CARTESIAN_POINT('',(-0.1,-35.41,-3.1)); +#30737 = DIRECTION('',(0.,-0.,-1.)); +#30738 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30739 = ADVANCED_FACE('',(#30740),#30751,.T.); +#30740 = FACE_BOUND('',#30741,.T.); +#30741 = EDGE_LOOP('',(#30742,#30748,#30749,#30750)); +#30742 = ORIENTED_EDGE('',*,*,#30743,.T.); +#30743 = EDGE_CURVE('',#25263,#25199,#30744,.T.); +#30744 = LINE('',#30745,#30746); +#30745 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#30746 = VECTOR('',#30747,1.); +#30747 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30748 = ORIENTED_EDGE('',*,*,#25206,.T.); +#30749 = ORIENTED_EDGE('',*,*,#30726,.F.); +#30750 = ORIENTED_EDGE('',*,*,#25270,.F.); +#30751 = PLANE('',#30752); +#30752 = AXIS2_PLACEMENT_3D('',#30753,#30754,#30755); +#30753 = CARTESIAN_POINT('',(-0.1,-35.26,-2.5)); +#30754 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30755 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30756 = ADVANCED_FACE('',(#30757),#30763,.T.); +#30757 = FACE_BOUND('',#30758,.T.); +#30758 = EDGE_LOOP('',(#30759,#30760,#30761,#30762)); +#30759 = ORIENTED_EDGE('',*,*,#25236,.T.); +#30760 = ORIENTED_EDGE('',*,*,#25198,.T.); +#30761 = ORIENTED_EDGE('',*,*,#30743,.F.); +#30762 = ORIENTED_EDGE('',*,*,#25262,.F.); +#30763 = PLANE('',#30764); +#30764 = AXIS2_PLACEMENT_3D('',#30765,#30766,#30767); +#30765 = CARTESIAN_POINT('',(-0.1,-35.26,0.2)); +#30766 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30767 = DIRECTION('',(0.,0.,-1.)); +#30768 = ADVANCED_FACE('',(#30769),#30780,.T.); +#30769 = FACE_BOUND('',#30770,.T.); +#30770 = EDGE_LOOP('',(#30771,#30777,#30778,#30779)); +#30771 = ORIENTED_EDGE('',*,*,#30772,.T.); +#30772 = EDGE_CURVE('',#25382,#25318,#30773,.T.); +#30773 = LINE('',#30774,#30775); +#30774 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#30775 = VECTOR('',#30776,1.); +#30776 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30777 = ORIENTED_EDGE('',*,*,#25317,.T.); +#30778 = ORIENTED_EDGE('',*,*,#25302,.F.); +#30779 = ORIENTED_EDGE('',*,*,#25381,.F.); +#30780 = PLANE('',#30781); +#30781 = AXIS2_PLACEMENT_3D('',#30782,#30783,#30784); +#30782 = CARTESIAN_POINT('',(-0.1,-33.32,-2.5)); +#30783 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30784 = DIRECTION('',(0.,0.,1.)); +#30785 = ADVANCED_FACE('',(#30786),#30797,.T.); +#30786 = FACE_BOUND('',#30787,.T.); +#30787 = EDGE_LOOP('',(#30788,#30794,#30795,#30796)); +#30788 = ORIENTED_EDGE('',*,*,#30789,.T.); +#30789 = EDGE_CURVE('',#25407,#25343,#30790,.T.); +#30790 = LINE('',#30791,#30792); +#30791 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#30792 = VECTOR('',#30793,1.); +#30793 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30794 = ORIENTED_EDGE('',*,*,#25350,.T.); +#30795 = ORIENTED_EDGE('',*,*,#30772,.F.); +#30796 = ORIENTED_EDGE('',*,*,#25414,.F.); +#30797 = PLANE('',#30798); +#30798 = AXIS2_PLACEMENT_3D('',#30799,#30800,#30801); +#30799 = CARTESIAN_POINT('',(-0.1,-33.17,-3.1)); +#30800 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30801 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30802 = ADVANCED_FACE('',(#30803),#30814,.T.); +#30803 = FACE_BOUND('',#30804,.T.); +#30804 = EDGE_LOOP('',(#30805,#30811,#30812,#30813)); +#30805 = ORIENTED_EDGE('',*,*,#30806,.T.); +#30806 = EDGE_CURVE('',#25399,#25335,#30807,.T.); +#30807 = LINE('',#30808,#30809); +#30808 = CARTESIAN_POINT('',(-0.1,-32.87,-3.1)); +#30809 = VECTOR('',#30810,1.); +#30810 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30811 = ORIENTED_EDGE('',*,*,#25342,.T.); +#30812 = ORIENTED_EDGE('',*,*,#30789,.F.); +#30813 = ORIENTED_EDGE('',*,*,#25406,.T.); +#30814 = PLANE('',#30815); +#30815 = AXIS2_PLACEMENT_3D('',#30816,#30817,#30818); +#30816 = CARTESIAN_POINT('',(-0.1,-32.87,-3.1)); +#30817 = DIRECTION('',(0.,-0.,-1.)); +#30818 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30819 = ADVANCED_FACE('',(#30820),#30831,.T.); +#30820 = FACE_BOUND('',#30821,.T.); +#30821 = EDGE_LOOP('',(#30822,#30828,#30829,#30830)); +#30822 = ORIENTED_EDGE('',*,*,#30823,.T.); +#30823 = EDGE_CURVE('',#25391,#25327,#30824,.T.); +#30824 = LINE('',#30825,#30826); +#30825 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#30826 = VECTOR('',#30827,1.); +#30827 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30828 = ORIENTED_EDGE('',*,*,#25334,.T.); +#30829 = ORIENTED_EDGE('',*,*,#30806,.F.); +#30830 = ORIENTED_EDGE('',*,*,#25398,.F.); +#30831 = PLANE('',#30832); +#30832 = AXIS2_PLACEMENT_3D('',#30833,#30834,#30835); +#30833 = CARTESIAN_POINT('',(-0.1,-32.72,-2.5)); +#30834 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30835 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30836 = ADVANCED_FACE('',(#30837),#30843,.T.); +#30837 = FACE_BOUND('',#30838,.T.); +#30838 = EDGE_LOOP('',(#30839,#30840,#30841,#30842)); +#30839 = ORIENTED_EDGE('',*,*,#25364,.T.); +#30840 = ORIENTED_EDGE('',*,*,#25326,.T.); +#30841 = ORIENTED_EDGE('',*,*,#30823,.F.); +#30842 = ORIENTED_EDGE('',*,*,#25390,.F.); +#30843 = PLANE('',#30844); +#30844 = AXIS2_PLACEMENT_3D('',#30845,#30846,#30847); +#30845 = CARTESIAN_POINT('',(-0.1,-32.72,0.2)); +#30846 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30847 = DIRECTION('',(0.,0.,-1.)); +#30848 = ADVANCED_FACE('',(#30849),#30860,.T.); +#30849 = FACE_BOUND('',#30850,.T.); +#30850 = EDGE_LOOP('',(#30851,#30857,#30858,#30859)); +#30851 = ORIENTED_EDGE('',*,*,#30852,.T.); +#30852 = EDGE_CURVE('',#25510,#25446,#30853,.T.); +#30853 = LINE('',#30854,#30855); +#30854 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#30855 = VECTOR('',#30856,1.); +#30856 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30857 = ORIENTED_EDGE('',*,*,#25445,.T.); +#30858 = ORIENTED_EDGE('',*,*,#25430,.F.); +#30859 = ORIENTED_EDGE('',*,*,#25509,.F.); +#30860 = PLANE('',#30861); +#30861 = AXIS2_PLACEMENT_3D('',#30862,#30863,#30864); +#30862 = CARTESIAN_POINT('',(-0.1,-30.78,-2.5)); +#30863 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30864 = DIRECTION('',(0.,0.,1.)); +#30865 = ADVANCED_FACE('',(#30866),#30877,.T.); +#30866 = FACE_BOUND('',#30867,.T.); +#30867 = EDGE_LOOP('',(#30868,#30874,#30875,#30876)); +#30868 = ORIENTED_EDGE('',*,*,#30869,.T.); +#30869 = EDGE_CURVE('',#25535,#25471,#30870,.T.); +#30870 = LINE('',#30871,#30872); +#30871 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#30872 = VECTOR('',#30873,1.); +#30873 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30874 = ORIENTED_EDGE('',*,*,#25478,.T.); +#30875 = ORIENTED_EDGE('',*,*,#30852,.F.); +#30876 = ORIENTED_EDGE('',*,*,#25542,.F.); +#30877 = PLANE('',#30878); +#30878 = AXIS2_PLACEMENT_3D('',#30879,#30880,#30881); +#30879 = CARTESIAN_POINT('',(-0.1,-30.63,-3.1)); +#30880 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30881 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30882 = ADVANCED_FACE('',(#30883),#30894,.T.); +#30883 = FACE_BOUND('',#30884,.T.); +#30884 = EDGE_LOOP('',(#30885,#30891,#30892,#30893)); +#30885 = ORIENTED_EDGE('',*,*,#30886,.T.); +#30886 = EDGE_CURVE('',#25527,#25463,#30887,.T.); +#30887 = LINE('',#30888,#30889); +#30888 = CARTESIAN_POINT('',(-0.1,-30.33,-3.1)); +#30889 = VECTOR('',#30890,1.); +#30890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30891 = ORIENTED_EDGE('',*,*,#25470,.T.); +#30892 = ORIENTED_EDGE('',*,*,#30869,.F.); +#30893 = ORIENTED_EDGE('',*,*,#25534,.T.); +#30894 = PLANE('',#30895); +#30895 = AXIS2_PLACEMENT_3D('',#30896,#30897,#30898); +#30896 = CARTESIAN_POINT('',(-0.1,-30.33,-3.1)); +#30897 = DIRECTION('',(0.,-0.,-1.)); +#30898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30899 = ADVANCED_FACE('',(#30900),#30911,.T.); +#30900 = FACE_BOUND('',#30901,.T.); +#30901 = EDGE_LOOP('',(#30902,#30908,#30909,#30910)); +#30902 = ORIENTED_EDGE('',*,*,#30903,.T.); +#30903 = EDGE_CURVE('',#25519,#25455,#30904,.T.); +#30904 = LINE('',#30905,#30906); +#30905 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#30906 = VECTOR('',#30907,1.); +#30907 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30908 = ORIENTED_EDGE('',*,*,#25462,.T.); +#30909 = ORIENTED_EDGE('',*,*,#30886,.F.); +#30910 = ORIENTED_EDGE('',*,*,#25526,.F.); +#30911 = PLANE('',#30912); +#30912 = AXIS2_PLACEMENT_3D('',#30913,#30914,#30915); +#30913 = CARTESIAN_POINT('',(-0.1,-30.18,-2.5)); +#30914 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30915 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30916 = ADVANCED_FACE('',(#30917),#30923,.T.); +#30917 = FACE_BOUND('',#30918,.T.); +#30918 = EDGE_LOOP('',(#30919,#30920,#30921,#30922)); +#30919 = ORIENTED_EDGE('',*,*,#25492,.T.); +#30920 = ORIENTED_EDGE('',*,*,#25454,.T.); +#30921 = ORIENTED_EDGE('',*,*,#30903,.F.); +#30922 = ORIENTED_EDGE('',*,*,#25518,.F.); +#30923 = PLANE('',#30924); +#30924 = AXIS2_PLACEMENT_3D('',#30925,#30926,#30927); +#30925 = CARTESIAN_POINT('',(-0.1,-30.18,0.2)); +#30926 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#30927 = DIRECTION('',(0.,0.,-1.)); +#30928 = ADVANCED_FACE('',(#30929),#30940,.T.); +#30929 = FACE_BOUND('',#30930,.T.); +#30930 = EDGE_LOOP('',(#30931,#30937,#30938,#30939)); +#30931 = ORIENTED_EDGE('',*,*,#30932,.T.); +#30932 = EDGE_CURVE('',#25638,#25574,#30933,.T.); +#30933 = LINE('',#30934,#30935); +#30934 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#30935 = VECTOR('',#30936,1.); +#30936 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30937 = ORIENTED_EDGE('',*,*,#25573,.T.); +#30938 = ORIENTED_EDGE('',*,*,#25558,.F.); +#30939 = ORIENTED_EDGE('',*,*,#25637,.F.); +#30940 = PLANE('',#30941); +#30941 = AXIS2_PLACEMENT_3D('',#30942,#30943,#30944); +#30942 = CARTESIAN_POINT('',(-0.1,-28.24,-2.5)); +#30943 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30944 = DIRECTION('',(0.,0.,1.)); +#30945 = ADVANCED_FACE('',(#30946),#30957,.T.); +#30946 = FACE_BOUND('',#30947,.T.); +#30947 = EDGE_LOOP('',(#30948,#30954,#30955,#30956)); +#30948 = ORIENTED_EDGE('',*,*,#30949,.T.); +#30949 = EDGE_CURVE('',#25663,#25599,#30950,.T.); +#30950 = LINE('',#30951,#30952); +#30951 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#30952 = VECTOR('',#30953,1.); +#30953 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30954 = ORIENTED_EDGE('',*,*,#25606,.T.); +#30955 = ORIENTED_EDGE('',*,*,#30932,.F.); +#30956 = ORIENTED_EDGE('',*,*,#25670,.F.); +#30957 = PLANE('',#30958); +#30958 = AXIS2_PLACEMENT_3D('',#30959,#30960,#30961); +#30959 = CARTESIAN_POINT('',(-0.1,-28.09,-3.1)); +#30960 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#30961 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#30962 = ADVANCED_FACE('',(#30963),#30974,.T.); +#30963 = FACE_BOUND('',#30964,.T.); +#30964 = EDGE_LOOP('',(#30965,#30971,#30972,#30973)); +#30965 = ORIENTED_EDGE('',*,*,#30966,.T.); +#30966 = EDGE_CURVE('',#25655,#25591,#30967,.T.); +#30967 = LINE('',#30968,#30969); +#30968 = CARTESIAN_POINT('',(-0.1,-27.79,-3.1)); +#30969 = VECTOR('',#30970,1.); +#30970 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30971 = ORIENTED_EDGE('',*,*,#25598,.T.); +#30972 = ORIENTED_EDGE('',*,*,#30949,.F.); +#30973 = ORIENTED_EDGE('',*,*,#25662,.T.); +#30974 = PLANE('',#30975); +#30975 = AXIS2_PLACEMENT_3D('',#30976,#30977,#30978); +#30976 = CARTESIAN_POINT('',(-0.1,-27.79,-3.1)); +#30977 = DIRECTION('',(0.,-0.,-1.)); +#30978 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#30979 = ADVANCED_FACE('',(#30980),#30991,.T.); +#30980 = FACE_BOUND('',#30981,.T.); +#30981 = EDGE_LOOP('',(#30982,#30988,#30989,#30990)); +#30982 = ORIENTED_EDGE('',*,*,#30983,.T.); +#30983 = EDGE_CURVE('',#25647,#25583,#30984,.T.); +#30984 = LINE('',#30985,#30986); +#30985 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#30986 = VECTOR('',#30987,1.); +#30987 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#30988 = ORIENTED_EDGE('',*,*,#25590,.T.); +#30989 = ORIENTED_EDGE('',*,*,#30966,.F.); +#30990 = ORIENTED_EDGE('',*,*,#25654,.F.); +#30991 = PLANE('',#30992); +#30992 = AXIS2_PLACEMENT_3D('',#30993,#30994,#30995); +#30993 = CARTESIAN_POINT('',(-0.1,-27.64,-2.5)); +#30994 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#30995 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#30996 = ADVANCED_FACE('',(#30997),#31003,.T.); +#30997 = FACE_BOUND('',#30998,.T.); +#30998 = EDGE_LOOP('',(#30999,#31000,#31001,#31002)); +#30999 = ORIENTED_EDGE('',*,*,#25620,.T.); +#31000 = ORIENTED_EDGE('',*,*,#25582,.T.); +#31001 = ORIENTED_EDGE('',*,*,#30983,.F.); +#31002 = ORIENTED_EDGE('',*,*,#25646,.F.); +#31003 = PLANE('',#31004); +#31004 = AXIS2_PLACEMENT_3D('',#31005,#31006,#31007); +#31005 = CARTESIAN_POINT('',(-0.1,-27.64,0.2)); +#31006 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31007 = DIRECTION('',(0.,0.,-1.)); +#31008 = ADVANCED_FACE('',(#31009),#31020,.T.); +#31009 = FACE_BOUND('',#31010,.T.); +#31010 = EDGE_LOOP('',(#31011,#31017,#31018,#31019)); +#31011 = ORIENTED_EDGE('',*,*,#31012,.T.); +#31012 = EDGE_CURVE('',#25766,#25702,#31013,.T.); +#31013 = LINE('',#31014,#31015); +#31014 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#31015 = VECTOR('',#31016,1.); +#31016 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31017 = ORIENTED_EDGE('',*,*,#25701,.T.); +#31018 = ORIENTED_EDGE('',*,*,#25686,.F.); +#31019 = ORIENTED_EDGE('',*,*,#25765,.F.); +#31020 = PLANE('',#31021); +#31021 = AXIS2_PLACEMENT_3D('',#31022,#31023,#31024); +#31022 = CARTESIAN_POINT('',(-0.1,-25.7,-2.5)); +#31023 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31024 = DIRECTION('',(0.,0.,1.)); +#31025 = ADVANCED_FACE('',(#31026),#31037,.T.); +#31026 = FACE_BOUND('',#31027,.T.); +#31027 = EDGE_LOOP('',(#31028,#31034,#31035,#31036)); +#31028 = ORIENTED_EDGE('',*,*,#31029,.T.); +#31029 = EDGE_CURVE('',#25791,#25727,#31030,.T.); +#31030 = LINE('',#31031,#31032); +#31031 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#31032 = VECTOR('',#31033,1.); +#31033 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31034 = ORIENTED_EDGE('',*,*,#25734,.T.); +#31035 = ORIENTED_EDGE('',*,*,#31012,.F.); +#31036 = ORIENTED_EDGE('',*,*,#25798,.F.); +#31037 = PLANE('',#31038); +#31038 = AXIS2_PLACEMENT_3D('',#31039,#31040,#31041); +#31039 = CARTESIAN_POINT('',(-0.1,-25.55,-3.1)); +#31040 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31041 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31042 = ADVANCED_FACE('',(#31043),#31054,.T.); +#31043 = FACE_BOUND('',#31044,.T.); +#31044 = EDGE_LOOP('',(#31045,#31051,#31052,#31053)); +#31045 = ORIENTED_EDGE('',*,*,#31046,.T.); +#31046 = EDGE_CURVE('',#25783,#25719,#31047,.T.); +#31047 = LINE('',#31048,#31049); +#31048 = CARTESIAN_POINT('',(-0.1,-25.25,-3.1)); +#31049 = VECTOR('',#31050,1.); +#31050 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31051 = ORIENTED_EDGE('',*,*,#25726,.T.); +#31052 = ORIENTED_EDGE('',*,*,#31029,.F.); +#31053 = ORIENTED_EDGE('',*,*,#25790,.T.); +#31054 = PLANE('',#31055); +#31055 = AXIS2_PLACEMENT_3D('',#31056,#31057,#31058); +#31056 = CARTESIAN_POINT('',(-0.1,-25.25,-3.1)); +#31057 = DIRECTION('',(0.,-0.,-1.)); +#31058 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31059 = ADVANCED_FACE('',(#31060),#31071,.T.); +#31060 = FACE_BOUND('',#31061,.T.); +#31061 = EDGE_LOOP('',(#31062,#31068,#31069,#31070)); +#31062 = ORIENTED_EDGE('',*,*,#31063,.T.); +#31063 = EDGE_CURVE('',#25775,#25711,#31064,.T.); +#31064 = LINE('',#31065,#31066); +#31065 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#31066 = VECTOR('',#31067,1.); +#31067 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31068 = ORIENTED_EDGE('',*,*,#25718,.T.); +#31069 = ORIENTED_EDGE('',*,*,#31046,.F.); +#31070 = ORIENTED_EDGE('',*,*,#25782,.F.); +#31071 = PLANE('',#31072); +#31072 = AXIS2_PLACEMENT_3D('',#31073,#31074,#31075); +#31073 = CARTESIAN_POINT('',(-0.1,-25.1,-2.5)); +#31074 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31075 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31076 = ADVANCED_FACE('',(#31077),#31083,.T.); +#31077 = FACE_BOUND('',#31078,.T.); +#31078 = EDGE_LOOP('',(#31079,#31080,#31081,#31082)); +#31079 = ORIENTED_EDGE('',*,*,#25748,.T.); +#31080 = ORIENTED_EDGE('',*,*,#25710,.T.); +#31081 = ORIENTED_EDGE('',*,*,#31063,.F.); +#31082 = ORIENTED_EDGE('',*,*,#25774,.F.); +#31083 = PLANE('',#31084); +#31084 = AXIS2_PLACEMENT_3D('',#31085,#31086,#31087); +#31085 = CARTESIAN_POINT('',(-0.1,-25.1,0.2)); +#31086 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31087 = DIRECTION('',(0.,0.,-1.)); +#31088 = ADVANCED_FACE('',(#31089),#31100,.T.); +#31089 = FACE_BOUND('',#31090,.T.); +#31090 = EDGE_LOOP('',(#31091,#31097,#31098,#31099)); +#31091 = ORIENTED_EDGE('',*,*,#31092,.T.); +#31092 = EDGE_CURVE('',#25894,#25830,#31093,.T.); +#31093 = LINE('',#31094,#31095); +#31094 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#31095 = VECTOR('',#31096,1.); +#31096 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31097 = ORIENTED_EDGE('',*,*,#25829,.T.); +#31098 = ORIENTED_EDGE('',*,*,#25814,.F.); +#31099 = ORIENTED_EDGE('',*,*,#25893,.F.); +#31100 = PLANE('',#31101); +#31101 = AXIS2_PLACEMENT_3D('',#31102,#31103,#31104); +#31102 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#31103 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31104 = DIRECTION('',(0.,0.,1.)); +#31105 = ADVANCED_FACE('',(#31106),#31117,.T.); +#31106 = FACE_BOUND('',#31107,.T.); +#31107 = EDGE_LOOP('',(#31108,#31114,#31115,#31116)); +#31108 = ORIENTED_EDGE('',*,*,#31109,.T.); +#31109 = EDGE_CURVE('',#25919,#25855,#31110,.T.); +#31110 = LINE('',#31111,#31112); +#31111 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#31112 = VECTOR('',#31113,1.); +#31113 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31114 = ORIENTED_EDGE('',*,*,#25862,.T.); +#31115 = ORIENTED_EDGE('',*,*,#31092,.F.); +#31116 = ORIENTED_EDGE('',*,*,#25926,.F.); +#31117 = PLANE('',#31118); +#31118 = AXIS2_PLACEMENT_3D('',#31119,#31120,#31121); +#31119 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#31120 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31121 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31122 = ADVANCED_FACE('',(#31123),#31134,.T.); +#31123 = FACE_BOUND('',#31124,.T.); +#31124 = EDGE_LOOP('',(#31125,#31131,#31132,#31133)); +#31125 = ORIENTED_EDGE('',*,*,#31126,.T.); +#31126 = EDGE_CURVE('',#25911,#25847,#31127,.T.); +#31127 = LINE('',#31128,#31129); +#31128 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#31129 = VECTOR('',#31130,1.); +#31130 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31131 = ORIENTED_EDGE('',*,*,#25854,.T.); +#31132 = ORIENTED_EDGE('',*,*,#31109,.F.); +#31133 = ORIENTED_EDGE('',*,*,#25918,.T.); +#31134 = PLANE('',#31135); +#31135 = AXIS2_PLACEMENT_3D('',#31136,#31137,#31138); +#31136 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#31137 = DIRECTION('',(0.,-0.,-1.)); +#31138 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31139 = ADVANCED_FACE('',(#31140),#31151,.T.); +#31140 = FACE_BOUND('',#31141,.T.); +#31141 = EDGE_LOOP('',(#31142,#31148,#31149,#31150)); +#31142 = ORIENTED_EDGE('',*,*,#31143,.T.); +#31143 = EDGE_CURVE('',#25903,#25839,#31144,.T.); +#31144 = LINE('',#31145,#31146); +#31145 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#31146 = VECTOR('',#31147,1.); +#31147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31148 = ORIENTED_EDGE('',*,*,#25846,.T.); +#31149 = ORIENTED_EDGE('',*,*,#31126,.F.); +#31150 = ORIENTED_EDGE('',*,*,#25910,.F.); +#31151 = PLANE('',#31152); +#31152 = AXIS2_PLACEMENT_3D('',#31153,#31154,#31155); +#31153 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#31154 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31155 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31156 = ADVANCED_FACE('',(#31157),#31163,.T.); +#31157 = FACE_BOUND('',#31158,.T.); +#31158 = EDGE_LOOP('',(#31159,#31160,#31161,#31162)); +#31159 = ORIENTED_EDGE('',*,*,#25876,.T.); +#31160 = ORIENTED_EDGE('',*,*,#25838,.T.); +#31161 = ORIENTED_EDGE('',*,*,#31143,.F.); +#31162 = ORIENTED_EDGE('',*,*,#25902,.F.); +#31163 = PLANE('',#31164); +#31164 = AXIS2_PLACEMENT_3D('',#31165,#31166,#31167); +#31165 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#31166 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31167 = DIRECTION('',(0.,0.,-1.)); +#31168 = ADVANCED_FACE('',(#31169),#31180,.T.); +#31169 = FACE_BOUND('',#31170,.T.); +#31170 = EDGE_LOOP('',(#31171,#31177,#31178,#31179)); +#31171 = ORIENTED_EDGE('',*,*,#31172,.T.); +#31172 = EDGE_CURVE('',#26022,#25958,#31173,.T.); +#31173 = LINE('',#31174,#31175); +#31174 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#31175 = VECTOR('',#31176,1.); +#31176 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31177 = ORIENTED_EDGE('',*,*,#25957,.T.); +#31178 = ORIENTED_EDGE('',*,*,#25942,.F.); +#31179 = ORIENTED_EDGE('',*,*,#26021,.F.); +#31180 = PLANE('',#31181); +#31181 = AXIS2_PLACEMENT_3D('',#31182,#31183,#31184); +#31182 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#31183 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31184 = DIRECTION('',(0.,0.,1.)); +#31185 = ADVANCED_FACE('',(#31186),#31197,.T.); +#31186 = FACE_BOUND('',#31187,.T.); +#31187 = EDGE_LOOP('',(#31188,#31194,#31195,#31196)); +#31188 = ORIENTED_EDGE('',*,*,#31189,.T.); +#31189 = EDGE_CURVE('',#26047,#25983,#31190,.T.); +#31190 = LINE('',#31191,#31192); +#31191 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#31192 = VECTOR('',#31193,1.); +#31193 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31194 = ORIENTED_EDGE('',*,*,#25990,.T.); +#31195 = ORIENTED_EDGE('',*,*,#31172,.F.); +#31196 = ORIENTED_EDGE('',*,*,#26054,.F.); +#31197 = PLANE('',#31198); +#31198 = AXIS2_PLACEMENT_3D('',#31199,#31200,#31201); +#31199 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#31200 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31201 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31202 = ADVANCED_FACE('',(#31203),#31214,.T.); +#31203 = FACE_BOUND('',#31204,.T.); +#31204 = EDGE_LOOP('',(#31205,#31211,#31212,#31213)); +#31205 = ORIENTED_EDGE('',*,*,#31206,.T.); +#31206 = EDGE_CURVE('',#26039,#25975,#31207,.T.); +#31207 = LINE('',#31208,#31209); +#31208 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#31209 = VECTOR('',#31210,1.); +#31210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31211 = ORIENTED_EDGE('',*,*,#25982,.T.); +#31212 = ORIENTED_EDGE('',*,*,#31189,.F.); +#31213 = ORIENTED_EDGE('',*,*,#26046,.T.); +#31214 = PLANE('',#31215); +#31215 = AXIS2_PLACEMENT_3D('',#31216,#31217,#31218); +#31216 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#31217 = DIRECTION('',(0.,-0.,-1.)); +#31218 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31219 = ADVANCED_FACE('',(#31220),#31231,.T.); +#31220 = FACE_BOUND('',#31221,.T.); +#31221 = EDGE_LOOP('',(#31222,#31228,#31229,#31230)); +#31222 = ORIENTED_EDGE('',*,*,#31223,.T.); +#31223 = EDGE_CURVE('',#26031,#25967,#31224,.T.); +#31224 = LINE('',#31225,#31226); +#31225 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#31226 = VECTOR('',#31227,1.); +#31227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31228 = ORIENTED_EDGE('',*,*,#25974,.T.); +#31229 = ORIENTED_EDGE('',*,*,#31206,.F.); +#31230 = ORIENTED_EDGE('',*,*,#26038,.F.); +#31231 = PLANE('',#31232); +#31232 = AXIS2_PLACEMENT_3D('',#31233,#31234,#31235); +#31233 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#31234 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31235 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31236 = ADVANCED_FACE('',(#31237),#31243,.T.); +#31237 = FACE_BOUND('',#31238,.T.); +#31238 = EDGE_LOOP('',(#31239,#31240,#31241,#31242)); +#31239 = ORIENTED_EDGE('',*,*,#26004,.T.); +#31240 = ORIENTED_EDGE('',*,*,#25966,.T.); +#31241 = ORIENTED_EDGE('',*,*,#31223,.F.); +#31242 = ORIENTED_EDGE('',*,*,#26030,.F.); +#31243 = PLANE('',#31244); +#31244 = AXIS2_PLACEMENT_3D('',#31245,#31246,#31247); +#31245 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#31246 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31247 = DIRECTION('',(0.,0.,-1.)); +#31248 = ADVANCED_FACE('',(#31249),#31260,.T.); +#31249 = FACE_BOUND('',#31250,.T.); +#31250 = EDGE_LOOP('',(#31251,#31257,#31258,#31259)); +#31251 = ORIENTED_EDGE('',*,*,#31252,.T.); +#31252 = EDGE_CURVE('',#26150,#26086,#31253,.T.); +#31253 = LINE('',#31254,#31255); +#31254 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#31255 = VECTOR('',#31256,1.); +#31256 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31257 = ORIENTED_EDGE('',*,*,#26085,.T.); +#31258 = ORIENTED_EDGE('',*,*,#26070,.F.); +#31259 = ORIENTED_EDGE('',*,*,#26149,.F.); +#31260 = PLANE('',#31261); +#31261 = AXIS2_PLACEMENT_3D('',#31262,#31263,#31264); +#31262 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#31263 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31264 = DIRECTION('',(0.,0.,1.)); +#31265 = ADVANCED_FACE('',(#31266),#31277,.T.); +#31266 = FACE_BOUND('',#31267,.T.); +#31267 = EDGE_LOOP('',(#31268,#31274,#31275,#31276)); +#31268 = ORIENTED_EDGE('',*,*,#31269,.T.); +#31269 = EDGE_CURVE('',#26175,#26111,#31270,.T.); +#31270 = LINE('',#31271,#31272); +#31271 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#31272 = VECTOR('',#31273,1.); +#31273 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31274 = ORIENTED_EDGE('',*,*,#26118,.T.); +#31275 = ORIENTED_EDGE('',*,*,#31252,.F.); +#31276 = ORIENTED_EDGE('',*,*,#26182,.F.); +#31277 = PLANE('',#31278); +#31278 = AXIS2_PLACEMENT_3D('',#31279,#31280,#31281); +#31279 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#31280 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31281 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31282 = ADVANCED_FACE('',(#31283),#31294,.T.); +#31283 = FACE_BOUND('',#31284,.T.); +#31284 = EDGE_LOOP('',(#31285,#31291,#31292,#31293)); +#31285 = ORIENTED_EDGE('',*,*,#31286,.T.); +#31286 = EDGE_CURVE('',#26167,#26103,#31287,.T.); +#31287 = LINE('',#31288,#31289); +#31288 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#31289 = VECTOR('',#31290,1.); +#31290 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31291 = ORIENTED_EDGE('',*,*,#26110,.T.); +#31292 = ORIENTED_EDGE('',*,*,#31269,.F.); +#31293 = ORIENTED_EDGE('',*,*,#26174,.T.); +#31294 = PLANE('',#31295); +#31295 = AXIS2_PLACEMENT_3D('',#31296,#31297,#31298); +#31296 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#31297 = DIRECTION('',(0.,-0.,-1.)); +#31298 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31299 = ADVANCED_FACE('',(#31300),#31311,.T.); +#31300 = FACE_BOUND('',#31301,.T.); +#31301 = EDGE_LOOP('',(#31302,#31308,#31309,#31310)); +#31302 = ORIENTED_EDGE('',*,*,#31303,.T.); +#31303 = EDGE_CURVE('',#26159,#26095,#31304,.T.); +#31304 = LINE('',#31305,#31306); +#31305 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#31306 = VECTOR('',#31307,1.); +#31307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31308 = ORIENTED_EDGE('',*,*,#26102,.T.); +#31309 = ORIENTED_EDGE('',*,*,#31286,.F.); +#31310 = ORIENTED_EDGE('',*,*,#26166,.F.); +#31311 = PLANE('',#31312); +#31312 = AXIS2_PLACEMENT_3D('',#31313,#31314,#31315); +#31313 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#31314 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31315 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31316 = ADVANCED_FACE('',(#31317),#31323,.T.); +#31317 = FACE_BOUND('',#31318,.T.); +#31318 = EDGE_LOOP('',(#31319,#31320,#31321,#31322)); +#31319 = ORIENTED_EDGE('',*,*,#26132,.T.); +#31320 = ORIENTED_EDGE('',*,*,#26094,.T.); +#31321 = ORIENTED_EDGE('',*,*,#31303,.F.); +#31322 = ORIENTED_EDGE('',*,*,#26158,.F.); +#31323 = PLANE('',#31324); +#31324 = AXIS2_PLACEMENT_3D('',#31325,#31326,#31327); +#31325 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#31326 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31327 = DIRECTION('',(0.,0.,-1.)); +#31328 = ADVANCED_FACE('',(#31329),#31340,.T.); +#31329 = FACE_BOUND('',#31330,.T.); +#31330 = EDGE_LOOP('',(#31331,#31337,#31338,#31339)); +#31331 = ORIENTED_EDGE('',*,*,#31332,.T.); +#31332 = EDGE_CURVE('',#26278,#26214,#31333,.T.); +#31333 = LINE('',#31334,#31335); +#31334 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#31335 = VECTOR('',#31336,1.); +#31336 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31337 = ORIENTED_EDGE('',*,*,#26213,.T.); +#31338 = ORIENTED_EDGE('',*,*,#26198,.F.); +#31339 = ORIENTED_EDGE('',*,*,#26277,.F.); +#31340 = PLANE('',#31341); +#31341 = AXIS2_PLACEMENT_3D('',#31342,#31343,#31344); +#31342 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#31343 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31344 = DIRECTION('',(0.,0.,1.)); +#31345 = ADVANCED_FACE('',(#31346),#31357,.T.); +#31346 = FACE_BOUND('',#31347,.T.); +#31347 = EDGE_LOOP('',(#31348,#31354,#31355,#31356)); +#31348 = ORIENTED_EDGE('',*,*,#31349,.T.); +#31349 = EDGE_CURVE('',#26303,#26239,#31350,.T.); +#31350 = LINE('',#31351,#31352); +#31351 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#31352 = VECTOR('',#31353,1.); +#31353 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31354 = ORIENTED_EDGE('',*,*,#26246,.T.); +#31355 = ORIENTED_EDGE('',*,*,#31332,.F.); +#31356 = ORIENTED_EDGE('',*,*,#26310,.F.); +#31357 = PLANE('',#31358); +#31358 = AXIS2_PLACEMENT_3D('',#31359,#31360,#31361); +#31359 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#31360 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31361 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31362 = ADVANCED_FACE('',(#31363),#31374,.T.); +#31363 = FACE_BOUND('',#31364,.T.); +#31364 = EDGE_LOOP('',(#31365,#31371,#31372,#31373)); +#31365 = ORIENTED_EDGE('',*,*,#31366,.T.); +#31366 = EDGE_CURVE('',#26295,#26231,#31367,.T.); +#31367 = LINE('',#31368,#31369); +#31368 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#31369 = VECTOR('',#31370,1.); +#31370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31371 = ORIENTED_EDGE('',*,*,#26238,.T.); +#31372 = ORIENTED_EDGE('',*,*,#31349,.F.); +#31373 = ORIENTED_EDGE('',*,*,#26302,.T.); +#31374 = PLANE('',#31375); +#31375 = AXIS2_PLACEMENT_3D('',#31376,#31377,#31378); +#31376 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#31377 = DIRECTION('',(0.,-0.,-1.)); +#31378 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31379 = ADVANCED_FACE('',(#31380),#31391,.T.); +#31380 = FACE_BOUND('',#31381,.T.); +#31381 = EDGE_LOOP('',(#31382,#31388,#31389,#31390)); +#31382 = ORIENTED_EDGE('',*,*,#31383,.T.); +#31383 = EDGE_CURVE('',#26287,#26223,#31384,.T.); +#31384 = LINE('',#31385,#31386); +#31385 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#31386 = VECTOR('',#31387,1.); +#31387 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31388 = ORIENTED_EDGE('',*,*,#26230,.T.); +#31389 = ORIENTED_EDGE('',*,*,#31366,.F.); +#31390 = ORIENTED_EDGE('',*,*,#26294,.F.); +#31391 = PLANE('',#31392); +#31392 = AXIS2_PLACEMENT_3D('',#31393,#31394,#31395); +#31393 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#31394 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31395 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31396 = ADVANCED_FACE('',(#31397),#31403,.T.); +#31397 = FACE_BOUND('',#31398,.T.); +#31398 = EDGE_LOOP('',(#31399,#31400,#31401,#31402)); +#31399 = ORIENTED_EDGE('',*,*,#26260,.T.); +#31400 = ORIENTED_EDGE('',*,*,#26222,.T.); +#31401 = ORIENTED_EDGE('',*,*,#31383,.F.); +#31402 = ORIENTED_EDGE('',*,*,#26286,.F.); +#31403 = PLANE('',#31404); +#31404 = AXIS2_PLACEMENT_3D('',#31405,#31406,#31407); +#31405 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#31406 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31407 = DIRECTION('',(0.,0.,-1.)); +#31408 = ADVANCED_FACE('',(#31409),#31420,.T.); +#31409 = FACE_BOUND('',#31410,.T.); +#31410 = EDGE_LOOP('',(#31411,#31417,#31418,#31419)); +#31411 = ORIENTED_EDGE('',*,*,#31412,.T.); +#31412 = EDGE_CURVE('',#26406,#26342,#31413,.T.); +#31413 = LINE('',#31414,#31415); +#31414 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#31415 = VECTOR('',#31416,1.); +#31416 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31417 = ORIENTED_EDGE('',*,*,#26341,.T.); +#31418 = ORIENTED_EDGE('',*,*,#26326,.F.); +#31419 = ORIENTED_EDGE('',*,*,#26405,.F.); +#31420 = PLANE('',#31421); +#31421 = AXIS2_PLACEMENT_3D('',#31422,#31423,#31424); +#31422 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#31423 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31424 = DIRECTION('',(0.,0.,1.)); +#31425 = ADVANCED_FACE('',(#31426),#31437,.T.); +#31426 = FACE_BOUND('',#31427,.T.); +#31427 = EDGE_LOOP('',(#31428,#31434,#31435,#31436)); +#31428 = ORIENTED_EDGE('',*,*,#31429,.T.); +#31429 = EDGE_CURVE('',#26431,#26367,#31430,.T.); +#31430 = LINE('',#31431,#31432); +#31431 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#31432 = VECTOR('',#31433,1.); +#31433 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31434 = ORIENTED_EDGE('',*,*,#26374,.T.); +#31435 = ORIENTED_EDGE('',*,*,#31412,.F.); +#31436 = ORIENTED_EDGE('',*,*,#26438,.F.); +#31437 = PLANE('',#31438); +#31438 = AXIS2_PLACEMENT_3D('',#31439,#31440,#31441); +#31439 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#31440 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31441 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31442 = ADVANCED_FACE('',(#31443),#31454,.T.); +#31443 = FACE_BOUND('',#31444,.T.); +#31444 = EDGE_LOOP('',(#31445,#31451,#31452,#31453)); +#31445 = ORIENTED_EDGE('',*,*,#31446,.T.); +#31446 = EDGE_CURVE('',#26423,#26359,#31447,.T.); +#31447 = LINE('',#31448,#31449); +#31448 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#31449 = VECTOR('',#31450,1.); +#31450 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31451 = ORIENTED_EDGE('',*,*,#26366,.T.); +#31452 = ORIENTED_EDGE('',*,*,#31429,.F.); +#31453 = ORIENTED_EDGE('',*,*,#26430,.T.); +#31454 = PLANE('',#31455); +#31455 = AXIS2_PLACEMENT_3D('',#31456,#31457,#31458); +#31456 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#31457 = DIRECTION('',(0.,-0.,-1.)); +#31458 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31459 = ADVANCED_FACE('',(#31460),#31471,.T.); +#31460 = FACE_BOUND('',#31461,.T.); +#31461 = EDGE_LOOP('',(#31462,#31468,#31469,#31470)); +#31462 = ORIENTED_EDGE('',*,*,#31463,.T.); +#31463 = EDGE_CURVE('',#26415,#26351,#31464,.T.); +#31464 = LINE('',#31465,#31466); +#31465 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#31466 = VECTOR('',#31467,1.); +#31467 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31468 = ORIENTED_EDGE('',*,*,#26358,.T.); +#31469 = ORIENTED_EDGE('',*,*,#31446,.F.); +#31470 = ORIENTED_EDGE('',*,*,#26422,.F.); +#31471 = PLANE('',#31472); +#31472 = AXIS2_PLACEMENT_3D('',#31473,#31474,#31475); +#31473 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#31474 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31475 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31476 = ADVANCED_FACE('',(#31477),#31483,.T.); +#31477 = FACE_BOUND('',#31478,.T.); +#31478 = EDGE_LOOP('',(#31479,#31480,#31481,#31482)); +#31479 = ORIENTED_EDGE('',*,*,#26388,.T.); +#31480 = ORIENTED_EDGE('',*,*,#26350,.T.); +#31481 = ORIENTED_EDGE('',*,*,#31463,.F.); +#31482 = ORIENTED_EDGE('',*,*,#26414,.F.); +#31483 = PLANE('',#31484); +#31484 = AXIS2_PLACEMENT_3D('',#31485,#31486,#31487); +#31485 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#31486 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31487 = DIRECTION('',(0.,0.,-1.)); +#31488 = ADVANCED_FACE('',(#31489),#31500,.T.); +#31489 = FACE_BOUND('',#31490,.T.); +#31490 = EDGE_LOOP('',(#31491,#31497,#31498,#31499)); +#31491 = ORIENTED_EDGE('',*,*,#31492,.T.); +#31492 = EDGE_CURVE('',#26534,#26470,#31493,.T.); +#31493 = LINE('',#31494,#31495); +#31494 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#31495 = VECTOR('',#31496,1.); +#31496 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31497 = ORIENTED_EDGE('',*,*,#26469,.T.); +#31498 = ORIENTED_EDGE('',*,*,#26454,.F.); +#31499 = ORIENTED_EDGE('',*,*,#26533,.F.); +#31500 = PLANE('',#31501); +#31501 = AXIS2_PLACEMENT_3D('',#31502,#31503,#31504); +#31502 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#31503 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31504 = DIRECTION('',(0.,0.,1.)); +#31505 = ADVANCED_FACE('',(#31506),#31517,.T.); +#31506 = FACE_BOUND('',#31507,.T.); +#31507 = EDGE_LOOP('',(#31508,#31514,#31515,#31516)); +#31508 = ORIENTED_EDGE('',*,*,#31509,.T.); +#31509 = EDGE_CURVE('',#26559,#26495,#31510,.T.); +#31510 = LINE('',#31511,#31512); +#31511 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#31512 = VECTOR('',#31513,1.); +#31513 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31514 = ORIENTED_EDGE('',*,*,#26502,.T.); +#31515 = ORIENTED_EDGE('',*,*,#31492,.F.); +#31516 = ORIENTED_EDGE('',*,*,#26566,.F.); +#31517 = PLANE('',#31518); +#31518 = AXIS2_PLACEMENT_3D('',#31519,#31520,#31521); +#31519 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#31520 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31521 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31522 = ADVANCED_FACE('',(#31523),#31534,.T.); +#31523 = FACE_BOUND('',#31524,.T.); +#31524 = EDGE_LOOP('',(#31525,#31531,#31532,#31533)); +#31525 = ORIENTED_EDGE('',*,*,#31526,.T.); +#31526 = EDGE_CURVE('',#26551,#26487,#31527,.T.); +#31527 = LINE('',#31528,#31529); +#31528 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#31529 = VECTOR('',#31530,1.); +#31530 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31531 = ORIENTED_EDGE('',*,*,#26494,.T.); +#31532 = ORIENTED_EDGE('',*,*,#31509,.F.); +#31533 = ORIENTED_EDGE('',*,*,#26558,.T.); +#31534 = PLANE('',#31535); +#31535 = AXIS2_PLACEMENT_3D('',#31536,#31537,#31538); +#31536 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#31537 = DIRECTION('',(0.,-0.,-1.)); +#31538 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31539 = ADVANCED_FACE('',(#31540),#31551,.T.); +#31540 = FACE_BOUND('',#31541,.T.); +#31541 = EDGE_LOOP('',(#31542,#31548,#31549,#31550)); +#31542 = ORIENTED_EDGE('',*,*,#31543,.T.); +#31543 = EDGE_CURVE('',#26543,#26479,#31544,.T.); +#31544 = LINE('',#31545,#31546); +#31545 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#31546 = VECTOR('',#31547,1.); +#31547 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31548 = ORIENTED_EDGE('',*,*,#26486,.T.); +#31549 = ORIENTED_EDGE('',*,*,#31526,.F.); +#31550 = ORIENTED_EDGE('',*,*,#26550,.F.); +#31551 = PLANE('',#31552); +#31552 = AXIS2_PLACEMENT_3D('',#31553,#31554,#31555); +#31553 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#31554 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31555 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31556 = ADVANCED_FACE('',(#31557),#31563,.T.); +#31557 = FACE_BOUND('',#31558,.T.); +#31558 = EDGE_LOOP('',(#31559,#31560,#31561,#31562)); +#31559 = ORIENTED_EDGE('',*,*,#26516,.T.); +#31560 = ORIENTED_EDGE('',*,*,#26478,.T.); +#31561 = ORIENTED_EDGE('',*,*,#31543,.F.); +#31562 = ORIENTED_EDGE('',*,*,#26542,.F.); +#31563 = PLANE('',#31564); +#31564 = AXIS2_PLACEMENT_3D('',#31565,#31566,#31567); +#31565 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#31566 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31567 = DIRECTION('',(0.,0.,-1.)); +#31568 = ADVANCED_FACE('',(#31569),#31580,.T.); +#31569 = FACE_BOUND('',#31570,.T.); +#31570 = EDGE_LOOP('',(#31571,#31577,#31578,#31579)); +#31571 = ORIENTED_EDGE('',*,*,#31572,.T.); +#31572 = EDGE_CURVE('',#26662,#26598,#31573,.T.); +#31573 = LINE('',#31574,#31575); +#31574 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#31575 = VECTOR('',#31576,1.); +#31576 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31577 = ORIENTED_EDGE('',*,*,#26597,.T.); +#31578 = ORIENTED_EDGE('',*,*,#26582,.F.); +#31579 = ORIENTED_EDGE('',*,*,#26661,.F.); +#31580 = PLANE('',#31581); +#31581 = AXIS2_PLACEMENT_3D('',#31582,#31583,#31584); +#31582 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#31583 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31584 = DIRECTION('',(0.,0.,1.)); +#31585 = ADVANCED_FACE('',(#31586),#31597,.T.); +#31586 = FACE_BOUND('',#31587,.T.); +#31587 = EDGE_LOOP('',(#31588,#31594,#31595,#31596)); +#31588 = ORIENTED_EDGE('',*,*,#31589,.T.); +#31589 = EDGE_CURVE('',#26687,#26623,#31590,.T.); +#31590 = LINE('',#31591,#31592); +#31591 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#31592 = VECTOR('',#31593,1.); +#31593 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31594 = ORIENTED_EDGE('',*,*,#26630,.T.); +#31595 = ORIENTED_EDGE('',*,*,#31572,.F.); +#31596 = ORIENTED_EDGE('',*,*,#26694,.F.); +#31597 = PLANE('',#31598); +#31598 = AXIS2_PLACEMENT_3D('',#31599,#31600,#31601); +#31599 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#31600 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31601 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31602 = ADVANCED_FACE('',(#31603),#31614,.T.); +#31603 = FACE_BOUND('',#31604,.T.); +#31604 = EDGE_LOOP('',(#31605,#31611,#31612,#31613)); +#31605 = ORIENTED_EDGE('',*,*,#31606,.T.); +#31606 = EDGE_CURVE('',#26679,#26615,#31607,.T.); +#31607 = LINE('',#31608,#31609); +#31608 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#31609 = VECTOR('',#31610,1.); +#31610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31611 = ORIENTED_EDGE('',*,*,#26622,.T.); +#31612 = ORIENTED_EDGE('',*,*,#31589,.F.); +#31613 = ORIENTED_EDGE('',*,*,#26686,.T.); +#31614 = PLANE('',#31615); +#31615 = AXIS2_PLACEMENT_3D('',#31616,#31617,#31618); +#31616 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#31617 = DIRECTION('',(0.,-0.,-1.)); +#31618 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31619 = ADVANCED_FACE('',(#31620),#31631,.T.); +#31620 = FACE_BOUND('',#31621,.T.); +#31621 = EDGE_LOOP('',(#31622,#31628,#31629,#31630)); +#31622 = ORIENTED_EDGE('',*,*,#31623,.T.); +#31623 = EDGE_CURVE('',#26671,#26607,#31624,.T.); +#31624 = LINE('',#31625,#31626); +#31625 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#31626 = VECTOR('',#31627,1.); +#31627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31628 = ORIENTED_EDGE('',*,*,#26614,.T.); +#31629 = ORIENTED_EDGE('',*,*,#31606,.F.); +#31630 = ORIENTED_EDGE('',*,*,#26678,.F.); +#31631 = PLANE('',#31632); +#31632 = AXIS2_PLACEMENT_3D('',#31633,#31634,#31635); +#31633 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#31634 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31635 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31636 = ADVANCED_FACE('',(#31637),#31643,.T.); +#31637 = FACE_BOUND('',#31638,.T.); +#31638 = EDGE_LOOP('',(#31639,#31640,#31641,#31642)); +#31639 = ORIENTED_EDGE('',*,*,#26644,.T.); +#31640 = ORIENTED_EDGE('',*,*,#26606,.T.); +#31641 = ORIENTED_EDGE('',*,*,#31623,.F.); +#31642 = ORIENTED_EDGE('',*,*,#26670,.F.); +#31643 = PLANE('',#31644); +#31644 = AXIS2_PLACEMENT_3D('',#31645,#31646,#31647); +#31645 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#31646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31647 = DIRECTION('',(0.,0.,-1.)); +#31648 = ADVANCED_FACE('',(#31649),#31660,.T.); +#31649 = FACE_BOUND('',#31650,.T.); +#31650 = EDGE_LOOP('',(#31651,#31657,#31658,#31659)); +#31651 = ORIENTED_EDGE('',*,*,#31652,.T.); +#31652 = EDGE_CURVE('',#26790,#26726,#31653,.T.); +#31653 = LINE('',#31654,#31655); +#31654 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#31655 = VECTOR('',#31656,1.); +#31656 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31657 = ORIENTED_EDGE('',*,*,#26725,.T.); +#31658 = ORIENTED_EDGE('',*,*,#26710,.F.); +#31659 = ORIENTED_EDGE('',*,*,#26789,.F.); +#31660 = PLANE('',#31661); +#31661 = AXIS2_PLACEMENT_3D('',#31662,#31663,#31664); +#31662 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#31663 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31664 = DIRECTION('',(0.,0.,1.)); +#31665 = ADVANCED_FACE('',(#31666),#31677,.T.); +#31666 = FACE_BOUND('',#31667,.T.); +#31667 = EDGE_LOOP('',(#31668,#31674,#31675,#31676)); +#31668 = ORIENTED_EDGE('',*,*,#31669,.T.); +#31669 = EDGE_CURVE('',#26815,#26751,#31670,.T.); +#31670 = LINE('',#31671,#31672); +#31671 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#31672 = VECTOR('',#31673,1.); +#31673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31674 = ORIENTED_EDGE('',*,*,#26758,.T.); +#31675 = ORIENTED_EDGE('',*,*,#31652,.F.); +#31676 = ORIENTED_EDGE('',*,*,#26822,.F.); +#31677 = PLANE('',#31678); +#31678 = AXIS2_PLACEMENT_3D('',#31679,#31680,#31681); +#31679 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#31680 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31681 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31682 = ADVANCED_FACE('',(#31683),#31694,.T.); +#31683 = FACE_BOUND('',#31684,.T.); +#31684 = EDGE_LOOP('',(#31685,#31691,#31692,#31693)); +#31685 = ORIENTED_EDGE('',*,*,#31686,.T.); +#31686 = EDGE_CURVE('',#26807,#26743,#31687,.T.); +#31687 = LINE('',#31688,#31689); +#31688 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#31689 = VECTOR('',#31690,1.); +#31690 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31691 = ORIENTED_EDGE('',*,*,#26750,.T.); +#31692 = ORIENTED_EDGE('',*,*,#31669,.F.); +#31693 = ORIENTED_EDGE('',*,*,#26814,.T.); +#31694 = PLANE('',#31695); +#31695 = AXIS2_PLACEMENT_3D('',#31696,#31697,#31698); +#31696 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#31697 = DIRECTION('',(0.,-0.,-1.)); +#31698 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31699 = ADVANCED_FACE('',(#31700),#31711,.T.); +#31700 = FACE_BOUND('',#31701,.T.); +#31701 = EDGE_LOOP('',(#31702,#31708,#31709,#31710)); +#31702 = ORIENTED_EDGE('',*,*,#31703,.T.); +#31703 = EDGE_CURVE('',#26799,#26735,#31704,.T.); +#31704 = LINE('',#31705,#31706); +#31705 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#31706 = VECTOR('',#31707,1.); +#31707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31708 = ORIENTED_EDGE('',*,*,#26742,.T.); +#31709 = ORIENTED_EDGE('',*,*,#31686,.F.); +#31710 = ORIENTED_EDGE('',*,*,#26806,.F.); +#31711 = PLANE('',#31712); +#31712 = AXIS2_PLACEMENT_3D('',#31713,#31714,#31715); +#31713 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#31714 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31715 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31716 = ADVANCED_FACE('',(#31717),#31723,.T.); +#31717 = FACE_BOUND('',#31718,.T.); +#31718 = EDGE_LOOP('',(#31719,#31720,#31721,#31722)); +#31719 = ORIENTED_EDGE('',*,*,#26772,.T.); +#31720 = ORIENTED_EDGE('',*,*,#26734,.T.); +#31721 = ORIENTED_EDGE('',*,*,#31703,.F.); +#31722 = ORIENTED_EDGE('',*,*,#26798,.F.); +#31723 = PLANE('',#31724); +#31724 = AXIS2_PLACEMENT_3D('',#31725,#31726,#31727); +#31725 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#31726 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31727 = DIRECTION('',(0.,0.,-1.)); +#31728 = ADVANCED_FACE('',(#31729),#31740,.T.); +#31729 = FACE_BOUND('',#31730,.T.); +#31730 = EDGE_LOOP('',(#31731,#31737,#31738,#31739)); +#31731 = ORIENTED_EDGE('',*,*,#31732,.T.); +#31732 = EDGE_CURVE('',#26918,#26854,#31733,.T.); +#31733 = LINE('',#31734,#31735); +#31734 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#31735 = VECTOR('',#31736,1.); +#31736 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31737 = ORIENTED_EDGE('',*,*,#26853,.T.); +#31738 = ORIENTED_EDGE('',*,*,#26838,.F.); +#31739 = ORIENTED_EDGE('',*,*,#26917,.F.); +#31740 = PLANE('',#31741); +#31741 = AXIS2_PLACEMENT_3D('',#31742,#31743,#31744); +#31742 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#31743 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31744 = DIRECTION('',(0.,0.,1.)); +#31745 = ADVANCED_FACE('',(#31746),#31757,.T.); +#31746 = FACE_BOUND('',#31747,.T.); +#31747 = EDGE_LOOP('',(#31748,#31754,#31755,#31756)); +#31748 = ORIENTED_EDGE('',*,*,#31749,.T.); +#31749 = EDGE_CURVE('',#26943,#26879,#31750,.T.); +#31750 = LINE('',#31751,#31752); +#31751 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#31752 = VECTOR('',#31753,1.); +#31753 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31754 = ORIENTED_EDGE('',*,*,#26886,.T.); +#31755 = ORIENTED_EDGE('',*,*,#31732,.F.); +#31756 = ORIENTED_EDGE('',*,*,#26950,.F.); +#31757 = PLANE('',#31758); +#31758 = AXIS2_PLACEMENT_3D('',#31759,#31760,#31761); +#31759 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#31760 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31761 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31762 = ADVANCED_FACE('',(#31763),#31774,.T.); +#31763 = FACE_BOUND('',#31764,.T.); +#31764 = EDGE_LOOP('',(#31765,#31771,#31772,#31773)); +#31765 = ORIENTED_EDGE('',*,*,#31766,.T.); +#31766 = EDGE_CURVE('',#26935,#26871,#31767,.T.); +#31767 = LINE('',#31768,#31769); +#31768 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#31769 = VECTOR('',#31770,1.); +#31770 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31771 = ORIENTED_EDGE('',*,*,#26878,.T.); +#31772 = ORIENTED_EDGE('',*,*,#31749,.F.); +#31773 = ORIENTED_EDGE('',*,*,#26942,.T.); +#31774 = PLANE('',#31775); +#31775 = AXIS2_PLACEMENT_3D('',#31776,#31777,#31778); +#31776 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#31777 = DIRECTION('',(0.,-0.,-1.)); +#31778 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31779 = ADVANCED_FACE('',(#31780),#31791,.T.); +#31780 = FACE_BOUND('',#31781,.T.); +#31781 = EDGE_LOOP('',(#31782,#31788,#31789,#31790)); +#31782 = ORIENTED_EDGE('',*,*,#31783,.T.); +#31783 = EDGE_CURVE('',#26927,#26863,#31784,.T.); +#31784 = LINE('',#31785,#31786); +#31785 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#31786 = VECTOR('',#31787,1.); +#31787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31788 = ORIENTED_EDGE('',*,*,#26870,.T.); +#31789 = ORIENTED_EDGE('',*,*,#31766,.F.); +#31790 = ORIENTED_EDGE('',*,*,#26934,.F.); +#31791 = PLANE('',#31792); +#31792 = AXIS2_PLACEMENT_3D('',#31793,#31794,#31795); +#31793 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#31794 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31795 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31796 = ADVANCED_FACE('',(#31797),#31803,.T.); +#31797 = FACE_BOUND('',#31798,.T.); +#31798 = EDGE_LOOP('',(#31799,#31800,#31801,#31802)); +#31799 = ORIENTED_EDGE('',*,*,#26900,.T.); +#31800 = ORIENTED_EDGE('',*,*,#26862,.T.); +#31801 = ORIENTED_EDGE('',*,*,#31783,.F.); +#31802 = ORIENTED_EDGE('',*,*,#26926,.F.); +#31803 = PLANE('',#31804); +#31804 = AXIS2_PLACEMENT_3D('',#31805,#31806,#31807); +#31805 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#31806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31807 = DIRECTION('',(0.,0.,-1.)); +#31808 = ADVANCED_FACE('',(#31809),#31820,.T.); +#31809 = FACE_BOUND('',#31810,.T.); +#31810 = EDGE_LOOP('',(#31811,#31817,#31818,#31819)); +#31811 = ORIENTED_EDGE('',*,*,#31812,.T.); +#31812 = EDGE_CURVE('',#27046,#26982,#31813,.T.); +#31813 = LINE('',#31814,#31815); +#31814 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#31815 = VECTOR('',#31816,1.); +#31816 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31817 = ORIENTED_EDGE('',*,*,#26981,.T.); +#31818 = ORIENTED_EDGE('',*,*,#26966,.F.); +#31819 = ORIENTED_EDGE('',*,*,#27045,.F.); +#31820 = PLANE('',#31821); +#31821 = AXIS2_PLACEMENT_3D('',#31822,#31823,#31824); +#31822 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#31823 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31824 = DIRECTION('',(0.,0.,1.)); +#31825 = ADVANCED_FACE('',(#31826),#31837,.T.); +#31826 = FACE_BOUND('',#31827,.T.); +#31827 = EDGE_LOOP('',(#31828,#31834,#31835,#31836)); +#31828 = ORIENTED_EDGE('',*,*,#31829,.T.); +#31829 = EDGE_CURVE('',#27071,#27007,#31830,.T.); +#31830 = LINE('',#31831,#31832); +#31831 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#31832 = VECTOR('',#31833,1.); +#31833 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31834 = ORIENTED_EDGE('',*,*,#27014,.T.); +#31835 = ORIENTED_EDGE('',*,*,#31812,.F.); +#31836 = ORIENTED_EDGE('',*,*,#27078,.F.); +#31837 = PLANE('',#31838); +#31838 = AXIS2_PLACEMENT_3D('',#31839,#31840,#31841); +#31839 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#31840 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#31841 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#31842 = ADVANCED_FACE('',(#31843),#31854,.T.); +#31843 = FACE_BOUND('',#31844,.T.); +#31844 = EDGE_LOOP('',(#31845,#31851,#31852,#31853)); +#31845 = ORIENTED_EDGE('',*,*,#31846,.T.); +#31846 = EDGE_CURVE('',#27063,#26999,#31847,.T.); +#31847 = LINE('',#31848,#31849); +#31848 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#31849 = VECTOR('',#31850,1.); +#31850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31851 = ORIENTED_EDGE('',*,*,#27006,.T.); +#31852 = ORIENTED_EDGE('',*,*,#31829,.F.); +#31853 = ORIENTED_EDGE('',*,*,#27070,.T.); +#31854 = PLANE('',#31855); +#31855 = AXIS2_PLACEMENT_3D('',#31856,#31857,#31858); +#31856 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#31857 = DIRECTION('',(0.,-0.,-1.)); +#31858 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31859 = ADVANCED_FACE('',(#31860),#31871,.T.); +#31860 = FACE_BOUND('',#31861,.T.); +#31861 = EDGE_LOOP('',(#31862,#31868,#31869,#31870)); +#31862 = ORIENTED_EDGE('',*,*,#31863,.T.); +#31863 = EDGE_CURVE('',#27055,#26991,#31864,.T.); +#31864 = LINE('',#31865,#31866); +#31865 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#31866 = VECTOR('',#31867,1.); +#31867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31868 = ORIENTED_EDGE('',*,*,#26998,.T.); +#31869 = ORIENTED_EDGE('',*,*,#31846,.F.); +#31870 = ORIENTED_EDGE('',*,*,#27062,.F.); +#31871 = PLANE('',#31872); +#31872 = AXIS2_PLACEMENT_3D('',#31873,#31874,#31875); +#31873 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#31874 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#31875 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#31876 = ADVANCED_FACE('',(#31877),#31883,.T.); +#31877 = FACE_BOUND('',#31878,.T.); +#31878 = EDGE_LOOP('',(#31879,#31880,#31881,#31882)); +#31879 = ORIENTED_EDGE('',*,*,#27028,.T.); +#31880 = ORIENTED_EDGE('',*,*,#26990,.T.); +#31881 = ORIENTED_EDGE('',*,*,#31863,.F.); +#31882 = ORIENTED_EDGE('',*,*,#27054,.F.); +#31883 = PLANE('',#31884); +#31884 = AXIS2_PLACEMENT_3D('',#31885,#31886,#31887); +#31885 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#31886 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31887 = DIRECTION('',(0.,0.,-1.)); +#31888 = ADVANCED_FACE('',(#31889),#31900,.T.); +#31889 = FACE_BOUND('',#31890,.T.); +#31890 = EDGE_LOOP('',(#31891,#31892,#31893,#31894)); +#31891 = ORIENTED_EDGE('',*,*,#27237,.T.); +#31892 = ORIENTED_EDGE('',*,*,#27100,.T.); +#31893 = ORIENTED_EDGE('',*,*,#27125,.T.); +#31894 = ORIENTED_EDGE('',*,*,#31895,.T.); +#31895 = EDGE_CURVE('',#27126,#27230,#31896,.T.); +#31896 = LINE('',#31897,#31898); +#31897 = CARTESIAN_POINT('',(9.999999999999E-02,-48.26,0.9)); +#31898 = VECTOR('',#31899,1.); +#31899 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31900 = PLANE('',#31901); +#31901 = AXIS2_PLACEMENT_3D('',#31902,#31903,#31904); +#31902 = CARTESIAN_POINT('',(-5.451611384544E-15,-48.26,0.9)); +#31903 = DIRECTION('',(0.,0.,1.)); +#31904 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#31905 = ADVANCED_FACE('',(#31906),#31917,.T.); +#31906 = FACE_BOUND('',#31907,.T.); +#31907 = EDGE_LOOP('',(#31908,#31909,#31915,#31916)); +#31908 = ORIENTED_EDGE('',*,*,#27205,.T.); +#31909 = ORIENTED_EDGE('',*,*,#31910,.F.); +#31910 = EDGE_CURVE('',#27150,#27206,#31911,.T.); +#31911 = LINE('',#31912,#31913); +#31912 = CARTESIAN_POINT('',(-0.1,-48.26,0.9)); +#31913 = VECTOR('',#31914,1.); +#31914 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#31915 = ORIENTED_EDGE('',*,*,#27157,.T.); +#31916 = ORIENTED_EDGE('',*,*,#27180,.T.); +#31917 = PLANE('',#31918); +#31918 = AXIS2_PLACEMENT_3D('',#31919,#31920,#31921); +#31919 = CARTESIAN_POINT('',(-5.451611384544E-15,-48.26,0.9)); +#31920 = DIRECTION('',(0.,0.,1.)); +#31921 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#31922 = ADVANCED_FACE('',(#31923),#31966,.T.); +#31923 = FACE_BOUND('',#31924,.T.); +#31924 = EDGE_LOOP('',(#31925,#31926,#31934,#31942,#31950,#31958,#31964, + #31965)); +#31925 = ORIENTED_EDGE('',*,*,#27213,.F.); +#31926 = ORIENTED_EDGE('',*,*,#31927,.T.); +#31927 = EDGE_CURVE('',#27214,#31928,#31930,.T.); +#31928 = VERTEX_POINT('',#31929); +#31929 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#31930 = LINE('',#31931,#31932); +#31931 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#31932 = VECTOR('',#31933,1.); +#31933 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#31934 = ORIENTED_EDGE('',*,*,#31935,.T.); +#31935 = EDGE_CURVE('',#31928,#31936,#31938,.T.); +#31936 = VERTEX_POINT('',#31937); +#31937 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#31938 = LINE('',#31939,#31940); +#31939 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#31940 = VECTOR('',#31941,1.); +#31941 = DIRECTION('',(0.,0.,-1.)); +#31942 = ORIENTED_EDGE('',*,*,#31943,.T.); +#31943 = EDGE_CURVE('',#31936,#31944,#31946,.T.); +#31944 = VERTEX_POINT('',#31945); +#31945 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#31946 = LINE('',#31947,#31948); +#31947 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#31948 = VECTOR('',#31949,1.); +#31949 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31950 = ORIENTED_EDGE('',*,*,#31951,.T.); +#31951 = EDGE_CURVE('',#31944,#31952,#31954,.T.); +#31952 = VERTEX_POINT('',#31953); +#31953 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31954 = LINE('',#31955,#31956); +#31955 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#31956 = VECTOR('',#31957,1.); +#31957 = DIRECTION('',(0.,0.,1.)); +#31958 = ORIENTED_EDGE('',*,*,#31959,.T.); +#31959 = EDGE_CURVE('',#31952,#27142,#31960,.T.); +#31960 = LINE('',#31961,#31962); +#31961 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31962 = VECTOR('',#31963,1.); +#31963 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#31964 = ORIENTED_EDGE('',*,*,#27149,.F.); +#31965 = ORIENTED_EDGE('',*,*,#31910,.T.); +#31966 = PLANE('',#31967); +#31967 = AXIS2_PLACEMENT_3D('',#31968,#31969,#31970); +#31968 = CARTESIAN_POINT('',(-0.1,-48.26,3.911477598424)); +#31969 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#31970 = DIRECTION('',(0.,0.,1.)); +#31971 = ADVANCED_FACE('',(#31972),#31990,.T.); +#31972 = FACE_BOUND('',#31973,.T.); +#31973 = EDGE_LOOP('',(#31974,#31982,#31988,#31989)); +#31974 = ORIENTED_EDGE('',*,*,#31975,.T.); +#31975 = EDGE_CURVE('',#31952,#31976,#31978,.T.); +#31976 = VERTEX_POINT('',#31977); +#31977 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,7.35)); +#31978 = LINE('',#31979,#31980); +#31979 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31980 = VECTOR('',#31981,1.); +#31981 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#31982 = ORIENTED_EDGE('',*,*,#31983,.T.); +#31983 = EDGE_CURVE('',#31976,#27134,#31984,.T.); +#31984 = LINE('',#31985,#31986); +#31985 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,7.35)); +#31986 = VECTOR('',#31987,1.); +#31987 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#31988 = ORIENTED_EDGE('',*,*,#27141,.F.); +#31989 = ORIENTED_EDGE('',*,*,#31959,.F.); +#31990 = PLANE('',#31991); +#31991 = AXIS2_PLACEMENT_3D('',#31992,#31993,#31994); +#31992 = CARTESIAN_POINT('',(-0.1,-48.01,7.35)); +#31993 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#31994 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#31995 = ADVANCED_FACE('',(#31996),#32032,.F.); +#31996 = FACE_BOUND('',#31997,.F.); +#31997 = EDGE_LOOP('',(#31998,#31999,#32007,#32015,#32023,#32029,#32030, + #32031)); +#31998 = ORIENTED_EDGE('',*,*,#27229,.F.); +#31999 = ORIENTED_EDGE('',*,*,#32000,.T.); +#32000 = EDGE_CURVE('',#27222,#32001,#32003,.T.); +#32001 = VERTEX_POINT('',#32002); +#32002 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,7.35)); +#32003 = LINE('',#32004,#32005); +#32004 = CARTESIAN_POINT('',(9.999999999999E-02,-48.56,7.4)); +#32005 = VECTOR('',#32006,1.); +#32006 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32007 = ORIENTED_EDGE('',*,*,#32008,.T.); +#32008 = EDGE_CURVE('',#32001,#32009,#32011,.T.); +#32009 = VERTEX_POINT('',#32010); +#32010 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,1.25)); +#32011 = LINE('',#32012,#32013); +#32012 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,7.35)); +#32013 = VECTOR('',#32014,1.); +#32014 = DIRECTION('',(0.,0.,-1.)); +#32015 = ORIENTED_EDGE('',*,*,#32016,.T.); +#32016 = EDGE_CURVE('',#32009,#32017,#32019,.T.); +#32017 = VERTEX_POINT('',#32018); +#32018 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,1.25)); +#32019 = LINE('',#32020,#32021); +#32020 = CARTESIAN_POINT('',(9.999999999999E-02,-48.51,1.25)); +#32021 = VECTOR('',#32022,1.); +#32022 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32023 = ORIENTED_EDGE('',*,*,#32024,.T.); +#32024 = EDGE_CURVE('',#32017,#31976,#32025,.T.); +#32025 = LINE('',#32026,#32027); +#32026 = CARTESIAN_POINT('',(9.999999999999E-02,-48.01,1.25)); +#32027 = VECTOR('',#32028,1.); +#32028 = DIRECTION('',(0.,0.,1.)); +#32029 = ORIENTED_EDGE('',*,*,#31983,.T.); +#32030 = ORIENTED_EDGE('',*,*,#27133,.F.); +#32031 = ORIENTED_EDGE('',*,*,#31895,.T.); +#32032 = PLANE('',#32033); +#32033 = AXIS2_PLACEMENT_3D('',#32034,#32035,#32036); +#32034 = CARTESIAN_POINT('',(9.999999999999E-02,-48.26,3.911477598424)); +#32035 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32036 = DIRECTION('',(0.,0.,1.)); +#32037 = ADVANCED_FACE('',(#32038),#32049,.T.); +#32038 = FACE_BOUND('',#32039,.T.); +#32039 = EDGE_LOOP('',(#32040,#32041,#32042,#32048)); +#32040 = ORIENTED_EDGE('',*,*,#27221,.T.); +#32041 = ORIENTED_EDGE('',*,*,#32000,.T.); +#32042 = ORIENTED_EDGE('',*,*,#32043,.F.); +#32043 = EDGE_CURVE('',#31928,#32001,#32044,.T.); +#32044 = LINE('',#32045,#32046); +#32045 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#32046 = VECTOR('',#32047,1.); +#32047 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32048 = ORIENTED_EDGE('',*,*,#31927,.F.); +#32049 = PLANE('',#32050); +#32050 = AXIS2_PLACEMENT_3D('',#32051,#32052,#32053); +#32051 = CARTESIAN_POINT('',(-0.1,-48.56,7.4)); +#32052 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32053 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32054 = ADVANCED_FACE('',(#32055),#32066,.T.); +#32055 = FACE_BOUND('',#32056,.T.); +#32056 = EDGE_LOOP('',(#32057,#32058,#32059,#32060)); +#32057 = ORIENTED_EDGE('',*,*,#27397,.T.); +#32058 = ORIENTED_EDGE('',*,*,#27260,.T.); +#32059 = ORIENTED_EDGE('',*,*,#27285,.T.); +#32060 = ORIENTED_EDGE('',*,*,#32061,.T.); +#32061 = EDGE_CURVE('',#27286,#27390,#32062,.T.); +#32062 = LINE('',#32063,#32064); +#32063 = CARTESIAN_POINT('',(9.999999999999E-02,-45.72,0.9)); +#32064 = VECTOR('',#32065,1.); +#32065 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32066 = PLANE('',#32067); +#32067 = AXIS2_PLACEMENT_3D('',#32068,#32069,#32070); +#32068 = CARTESIAN_POINT('',(-5.169614736289E-15,-45.72,0.9)); +#32069 = DIRECTION('',(0.,0.,1.)); +#32070 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32071 = ADVANCED_FACE('',(#32072),#32083,.T.); +#32072 = FACE_BOUND('',#32073,.T.); +#32073 = EDGE_LOOP('',(#32074,#32075,#32081,#32082)); +#32074 = ORIENTED_EDGE('',*,*,#27365,.T.); +#32075 = ORIENTED_EDGE('',*,*,#32076,.F.); +#32076 = EDGE_CURVE('',#27310,#27366,#32077,.T.); +#32077 = LINE('',#32078,#32079); +#32078 = CARTESIAN_POINT('',(-0.1,-45.72,0.9)); +#32079 = VECTOR('',#32080,1.); +#32080 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32081 = ORIENTED_EDGE('',*,*,#27317,.T.); +#32082 = ORIENTED_EDGE('',*,*,#27340,.T.); +#32083 = PLANE('',#32084); +#32084 = AXIS2_PLACEMENT_3D('',#32085,#32086,#32087); +#32085 = CARTESIAN_POINT('',(-5.169614736289E-15,-45.72,0.9)); +#32086 = DIRECTION('',(0.,0.,1.)); +#32087 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32088 = ADVANCED_FACE('',(#32089),#32132,.T.); +#32089 = FACE_BOUND('',#32090,.T.); +#32090 = EDGE_LOOP('',(#32091,#32092,#32100,#32108,#32116,#32124,#32130, + #32131)); +#32091 = ORIENTED_EDGE('',*,*,#27373,.F.); +#32092 = ORIENTED_EDGE('',*,*,#32093,.T.); +#32093 = EDGE_CURVE('',#27374,#32094,#32096,.T.); +#32094 = VERTEX_POINT('',#32095); +#32095 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#32096 = LINE('',#32097,#32098); +#32097 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#32098 = VECTOR('',#32099,1.); +#32099 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32100 = ORIENTED_EDGE('',*,*,#32101,.T.); +#32101 = EDGE_CURVE('',#32094,#32102,#32104,.T.); +#32102 = VERTEX_POINT('',#32103); +#32103 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#32104 = LINE('',#32105,#32106); +#32105 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#32106 = VECTOR('',#32107,1.); +#32107 = DIRECTION('',(0.,0.,-1.)); +#32108 = ORIENTED_EDGE('',*,*,#32109,.T.); +#32109 = EDGE_CURVE('',#32102,#32110,#32112,.T.); +#32110 = VERTEX_POINT('',#32111); +#32111 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#32112 = LINE('',#32113,#32114); +#32113 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#32114 = VECTOR('',#32115,1.); +#32115 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32116 = ORIENTED_EDGE('',*,*,#32117,.T.); +#32117 = EDGE_CURVE('',#32110,#32118,#32120,.T.); +#32118 = VERTEX_POINT('',#32119); +#32119 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32120 = LINE('',#32121,#32122); +#32121 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#32122 = VECTOR('',#32123,1.); +#32123 = DIRECTION('',(0.,0.,1.)); +#32124 = ORIENTED_EDGE('',*,*,#32125,.T.); +#32125 = EDGE_CURVE('',#32118,#27302,#32126,.T.); +#32126 = LINE('',#32127,#32128); +#32127 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32128 = VECTOR('',#32129,1.); +#32129 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32130 = ORIENTED_EDGE('',*,*,#27309,.F.); +#32131 = ORIENTED_EDGE('',*,*,#32076,.T.); +#32132 = PLANE('',#32133); +#32133 = AXIS2_PLACEMENT_3D('',#32134,#32135,#32136); +#32134 = CARTESIAN_POINT('',(-0.1,-45.72,3.911477598424)); +#32135 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32136 = DIRECTION('',(0.,0.,1.)); +#32137 = ADVANCED_FACE('',(#32138),#32156,.T.); +#32138 = FACE_BOUND('',#32139,.T.); +#32139 = EDGE_LOOP('',(#32140,#32148,#32154,#32155)); +#32140 = ORIENTED_EDGE('',*,*,#32141,.T.); +#32141 = EDGE_CURVE('',#32118,#32142,#32144,.T.); +#32142 = VERTEX_POINT('',#32143); +#32143 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,7.35)); +#32144 = LINE('',#32145,#32146); +#32145 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32146 = VECTOR('',#32147,1.); +#32147 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32148 = ORIENTED_EDGE('',*,*,#32149,.T.); +#32149 = EDGE_CURVE('',#32142,#27294,#32150,.T.); +#32150 = LINE('',#32151,#32152); +#32151 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,7.35)); +#32152 = VECTOR('',#32153,1.); +#32153 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32154 = ORIENTED_EDGE('',*,*,#27301,.F.); +#32155 = ORIENTED_EDGE('',*,*,#32125,.F.); +#32156 = PLANE('',#32157); +#32157 = AXIS2_PLACEMENT_3D('',#32158,#32159,#32160); +#32158 = CARTESIAN_POINT('',(-0.1,-45.47,7.35)); +#32159 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32160 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32161 = ADVANCED_FACE('',(#32162),#32198,.F.); +#32162 = FACE_BOUND('',#32163,.F.); +#32163 = EDGE_LOOP('',(#32164,#32165,#32173,#32181,#32189,#32195,#32196, + #32197)); +#32164 = ORIENTED_EDGE('',*,*,#27389,.F.); +#32165 = ORIENTED_EDGE('',*,*,#32166,.T.); +#32166 = EDGE_CURVE('',#27382,#32167,#32169,.T.); +#32167 = VERTEX_POINT('',#32168); +#32168 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,7.35)); +#32169 = LINE('',#32170,#32171); +#32170 = CARTESIAN_POINT('',(9.999999999999E-02,-46.02,7.4)); +#32171 = VECTOR('',#32172,1.); +#32172 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32173 = ORIENTED_EDGE('',*,*,#32174,.T.); +#32174 = EDGE_CURVE('',#32167,#32175,#32177,.T.); +#32175 = VERTEX_POINT('',#32176); +#32176 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,1.25)); +#32177 = LINE('',#32178,#32179); +#32178 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,7.35)); +#32179 = VECTOR('',#32180,1.); +#32180 = DIRECTION('',(0.,0.,-1.)); +#32181 = ORIENTED_EDGE('',*,*,#32182,.T.); +#32182 = EDGE_CURVE('',#32175,#32183,#32185,.T.); +#32183 = VERTEX_POINT('',#32184); +#32184 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,1.25)); +#32185 = LINE('',#32186,#32187); +#32186 = CARTESIAN_POINT('',(9.999999999999E-02,-45.97,1.25)); +#32187 = VECTOR('',#32188,1.); +#32188 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32189 = ORIENTED_EDGE('',*,*,#32190,.T.); +#32190 = EDGE_CURVE('',#32183,#32142,#32191,.T.); +#32191 = LINE('',#32192,#32193); +#32192 = CARTESIAN_POINT('',(9.999999999999E-02,-45.47,1.25)); +#32193 = VECTOR('',#32194,1.); +#32194 = DIRECTION('',(0.,0.,1.)); +#32195 = ORIENTED_EDGE('',*,*,#32149,.T.); +#32196 = ORIENTED_EDGE('',*,*,#27293,.F.); +#32197 = ORIENTED_EDGE('',*,*,#32061,.T.); +#32198 = PLANE('',#32199); +#32199 = AXIS2_PLACEMENT_3D('',#32200,#32201,#32202); +#32200 = CARTESIAN_POINT('',(9.999999999999E-02,-45.72,3.911477598424)); +#32201 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32202 = DIRECTION('',(0.,0.,1.)); +#32203 = ADVANCED_FACE('',(#32204),#32215,.T.); +#32204 = FACE_BOUND('',#32205,.T.); +#32205 = EDGE_LOOP('',(#32206,#32207,#32208,#32214)); +#32206 = ORIENTED_EDGE('',*,*,#27381,.T.); +#32207 = ORIENTED_EDGE('',*,*,#32166,.T.); +#32208 = ORIENTED_EDGE('',*,*,#32209,.F.); +#32209 = EDGE_CURVE('',#32094,#32167,#32210,.T.); +#32210 = LINE('',#32211,#32212); +#32211 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#32212 = VECTOR('',#32213,1.); +#32213 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32214 = ORIENTED_EDGE('',*,*,#32093,.F.); +#32215 = PLANE('',#32216); +#32216 = AXIS2_PLACEMENT_3D('',#32217,#32218,#32219); +#32217 = CARTESIAN_POINT('',(-0.1,-46.02,7.4)); +#32218 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32219 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32220 = ADVANCED_FACE('',(#32221),#32232,.T.); +#32221 = FACE_BOUND('',#32222,.T.); +#32222 = EDGE_LOOP('',(#32223,#32224,#32225,#32226)); +#32223 = ORIENTED_EDGE('',*,*,#27557,.T.); +#32224 = ORIENTED_EDGE('',*,*,#27420,.T.); +#32225 = ORIENTED_EDGE('',*,*,#27445,.T.); +#32226 = ORIENTED_EDGE('',*,*,#32227,.T.); +#32227 = EDGE_CURVE('',#27446,#27550,#32228,.T.); +#32228 = LINE('',#32229,#32230); +#32229 = CARTESIAN_POINT('',(0.1,-43.18,0.9)); +#32230 = VECTOR('',#32231,1.); +#32231 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32232 = PLANE('',#32233); +#32233 = AXIS2_PLACEMENT_3D('',#32234,#32235,#32236); +#32234 = CARTESIAN_POINT('',(-4.887618088034E-15,-43.18,0.9)); +#32235 = DIRECTION('',(0.,0.,1.)); +#32236 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32237 = ADVANCED_FACE('',(#32238),#32249,.T.); +#32238 = FACE_BOUND('',#32239,.T.); +#32239 = EDGE_LOOP('',(#32240,#32241,#32247,#32248)); +#32240 = ORIENTED_EDGE('',*,*,#27525,.T.); +#32241 = ORIENTED_EDGE('',*,*,#32242,.F.); +#32242 = EDGE_CURVE('',#27470,#27526,#32243,.T.); +#32243 = LINE('',#32244,#32245); +#32244 = CARTESIAN_POINT('',(-0.1,-43.18,0.9)); +#32245 = VECTOR('',#32246,1.); +#32246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32247 = ORIENTED_EDGE('',*,*,#27477,.T.); +#32248 = ORIENTED_EDGE('',*,*,#27500,.T.); +#32249 = PLANE('',#32250); +#32250 = AXIS2_PLACEMENT_3D('',#32251,#32252,#32253); +#32251 = CARTESIAN_POINT('',(-4.887618088034E-15,-43.18,0.9)); +#32252 = DIRECTION('',(0.,0.,1.)); +#32253 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32254 = ADVANCED_FACE('',(#32255),#32298,.T.); +#32255 = FACE_BOUND('',#32256,.T.); +#32256 = EDGE_LOOP('',(#32257,#32258,#32266,#32274,#32282,#32290,#32296, + #32297)); +#32257 = ORIENTED_EDGE('',*,*,#27533,.F.); +#32258 = ORIENTED_EDGE('',*,*,#32259,.T.); +#32259 = EDGE_CURVE('',#27534,#32260,#32262,.T.); +#32260 = VERTEX_POINT('',#32261); +#32261 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#32262 = LINE('',#32263,#32264); +#32263 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#32264 = VECTOR('',#32265,1.); +#32265 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32266 = ORIENTED_EDGE('',*,*,#32267,.T.); +#32267 = EDGE_CURVE('',#32260,#32268,#32270,.T.); +#32268 = VERTEX_POINT('',#32269); +#32269 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#32270 = LINE('',#32271,#32272); +#32271 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#32272 = VECTOR('',#32273,1.); +#32273 = DIRECTION('',(0.,0.,-1.)); +#32274 = ORIENTED_EDGE('',*,*,#32275,.T.); +#32275 = EDGE_CURVE('',#32268,#32276,#32278,.T.); +#32276 = VERTEX_POINT('',#32277); +#32277 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#32278 = LINE('',#32279,#32280); +#32279 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#32280 = VECTOR('',#32281,1.); +#32281 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32282 = ORIENTED_EDGE('',*,*,#32283,.T.); +#32283 = EDGE_CURVE('',#32276,#32284,#32286,.T.); +#32284 = VERTEX_POINT('',#32285); +#32285 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32286 = LINE('',#32287,#32288); +#32287 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#32288 = VECTOR('',#32289,1.); +#32289 = DIRECTION('',(0.,0.,1.)); +#32290 = ORIENTED_EDGE('',*,*,#32291,.T.); +#32291 = EDGE_CURVE('',#32284,#27462,#32292,.T.); +#32292 = LINE('',#32293,#32294); +#32293 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32294 = VECTOR('',#32295,1.); +#32295 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32296 = ORIENTED_EDGE('',*,*,#27469,.F.); +#32297 = ORIENTED_EDGE('',*,*,#32242,.T.); +#32298 = PLANE('',#32299); +#32299 = AXIS2_PLACEMENT_3D('',#32300,#32301,#32302); +#32300 = CARTESIAN_POINT('',(-0.1,-43.18,3.911477598424)); +#32301 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32302 = DIRECTION('',(0.,0.,1.)); +#32303 = ADVANCED_FACE('',(#32304),#32322,.T.); +#32304 = FACE_BOUND('',#32305,.T.); +#32305 = EDGE_LOOP('',(#32306,#32314,#32320,#32321)); +#32306 = ORIENTED_EDGE('',*,*,#32307,.T.); +#32307 = EDGE_CURVE('',#32284,#32308,#32310,.T.); +#32308 = VERTEX_POINT('',#32309); +#32309 = CARTESIAN_POINT('',(0.1,-42.93,7.35)); +#32310 = LINE('',#32311,#32312); +#32311 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32312 = VECTOR('',#32313,1.); +#32313 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32314 = ORIENTED_EDGE('',*,*,#32315,.T.); +#32315 = EDGE_CURVE('',#32308,#27454,#32316,.T.); +#32316 = LINE('',#32317,#32318); +#32317 = CARTESIAN_POINT('',(0.1,-42.93,7.35)); +#32318 = VECTOR('',#32319,1.); +#32319 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32320 = ORIENTED_EDGE('',*,*,#27461,.F.); +#32321 = ORIENTED_EDGE('',*,*,#32291,.F.); +#32322 = PLANE('',#32323); +#32323 = AXIS2_PLACEMENT_3D('',#32324,#32325,#32326); +#32324 = CARTESIAN_POINT('',(-0.1,-42.93,7.35)); +#32325 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32326 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32327 = ADVANCED_FACE('',(#32328),#32364,.F.); +#32328 = FACE_BOUND('',#32329,.F.); +#32329 = EDGE_LOOP('',(#32330,#32331,#32339,#32347,#32355,#32361,#32362, + #32363)); +#32330 = ORIENTED_EDGE('',*,*,#27549,.F.); +#32331 = ORIENTED_EDGE('',*,*,#32332,.T.); +#32332 = EDGE_CURVE('',#27542,#32333,#32335,.T.); +#32333 = VERTEX_POINT('',#32334); +#32334 = CARTESIAN_POINT('',(0.1,-43.43,7.35)); +#32335 = LINE('',#32336,#32337); +#32336 = CARTESIAN_POINT('',(0.1,-43.48,7.4)); +#32337 = VECTOR('',#32338,1.); +#32338 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32339 = ORIENTED_EDGE('',*,*,#32340,.T.); +#32340 = EDGE_CURVE('',#32333,#32341,#32343,.T.); +#32341 = VERTEX_POINT('',#32342); +#32342 = CARTESIAN_POINT('',(0.1,-43.43,1.25)); +#32343 = LINE('',#32344,#32345); +#32344 = CARTESIAN_POINT('',(0.1,-43.43,7.35)); +#32345 = VECTOR('',#32346,1.); +#32346 = DIRECTION('',(0.,0.,-1.)); +#32347 = ORIENTED_EDGE('',*,*,#32348,.T.); +#32348 = EDGE_CURVE('',#32341,#32349,#32351,.T.); +#32349 = VERTEX_POINT('',#32350); +#32350 = CARTESIAN_POINT('',(0.1,-42.93,1.25)); +#32351 = LINE('',#32352,#32353); +#32352 = CARTESIAN_POINT('',(0.1,-43.43,1.25)); +#32353 = VECTOR('',#32354,1.); +#32354 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32355 = ORIENTED_EDGE('',*,*,#32356,.T.); +#32356 = EDGE_CURVE('',#32349,#32308,#32357,.T.); +#32357 = LINE('',#32358,#32359); +#32358 = CARTESIAN_POINT('',(0.1,-42.93,1.25)); +#32359 = VECTOR('',#32360,1.); +#32360 = DIRECTION('',(0.,0.,1.)); +#32361 = ORIENTED_EDGE('',*,*,#32315,.T.); +#32362 = ORIENTED_EDGE('',*,*,#27453,.F.); +#32363 = ORIENTED_EDGE('',*,*,#32227,.T.); +#32364 = PLANE('',#32365); +#32365 = AXIS2_PLACEMENT_3D('',#32366,#32367,#32368); +#32366 = CARTESIAN_POINT('',(0.1,-43.18,3.911477598424)); +#32367 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32368 = DIRECTION('',(0.,0.,1.)); +#32369 = ADVANCED_FACE('',(#32370),#32381,.T.); +#32370 = FACE_BOUND('',#32371,.T.); +#32371 = EDGE_LOOP('',(#32372,#32373,#32374,#32380)); +#32372 = ORIENTED_EDGE('',*,*,#27541,.T.); +#32373 = ORIENTED_EDGE('',*,*,#32332,.T.); +#32374 = ORIENTED_EDGE('',*,*,#32375,.F.); +#32375 = EDGE_CURVE('',#32260,#32333,#32376,.T.); +#32376 = LINE('',#32377,#32378); +#32377 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#32378 = VECTOR('',#32379,1.); +#32379 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32380 = ORIENTED_EDGE('',*,*,#32259,.F.); +#32381 = PLANE('',#32382); +#32382 = AXIS2_PLACEMENT_3D('',#32383,#32384,#32385); +#32383 = CARTESIAN_POINT('',(-0.1,-43.48,7.4)); +#32384 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32385 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32386 = ADVANCED_FACE('',(#32387),#32398,.T.); +#32387 = FACE_BOUND('',#32388,.T.); +#32388 = EDGE_LOOP('',(#32389,#32390,#32391,#32392)); +#32389 = ORIENTED_EDGE('',*,*,#27717,.T.); +#32390 = ORIENTED_EDGE('',*,*,#27580,.T.); +#32391 = ORIENTED_EDGE('',*,*,#27605,.T.); +#32392 = ORIENTED_EDGE('',*,*,#32393,.T.); +#32393 = EDGE_CURVE('',#27606,#27710,#32394,.T.); +#32394 = LINE('',#32395,#32396); +#32395 = CARTESIAN_POINT('',(0.1,-40.64,0.9)); +#32396 = VECTOR('',#32397,1.); +#32397 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32398 = PLANE('',#32399); +#32399 = AXIS2_PLACEMENT_3D('',#32400,#32401,#32402); +#32400 = CARTESIAN_POINT('',(-4.605621439779E-15,-40.64,0.9)); +#32401 = DIRECTION('',(0.,0.,1.)); +#32402 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32403 = ADVANCED_FACE('',(#32404),#32415,.T.); +#32404 = FACE_BOUND('',#32405,.T.); +#32405 = EDGE_LOOP('',(#32406,#32407,#32413,#32414)); +#32406 = ORIENTED_EDGE('',*,*,#27685,.T.); +#32407 = ORIENTED_EDGE('',*,*,#32408,.F.); +#32408 = EDGE_CURVE('',#27630,#27686,#32409,.T.); +#32409 = LINE('',#32410,#32411); +#32410 = CARTESIAN_POINT('',(-0.1,-40.64,0.9)); +#32411 = VECTOR('',#32412,1.); +#32412 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32413 = ORIENTED_EDGE('',*,*,#27637,.T.); +#32414 = ORIENTED_EDGE('',*,*,#27660,.T.); +#32415 = PLANE('',#32416); +#32416 = AXIS2_PLACEMENT_3D('',#32417,#32418,#32419); +#32417 = CARTESIAN_POINT('',(-4.605621439779E-15,-40.64,0.9)); +#32418 = DIRECTION('',(0.,0.,1.)); +#32419 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32420 = ADVANCED_FACE('',(#32421),#32464,.T.); +#32421 = FACE_BOUND('',#32422,.T.); +#32422 = EDGE_LOOP('',(#32423,#32424,#32432,#32440,#32448,#32456,#32462, + #32463)); +#32423 = ORIENTED_EDGE('',*,*,#27693,.F.); +#32424 = ORIENTED_EDGE('',*,*,#32425,.T.); +#32425 = EDGE_CURVE('',#27694,#32426,#32428,.T.); +#32426 = VERTEX_POINT('',#32427); +#32427 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#32428 = LINE('',#32429,#32430); +#32429 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#32430 = VECTOR('',#32431,1.); +#32431 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32432 = ORIENTED_EDGE('',*,*,#32433,.T.); +#32433 = EDGE_CURVE('',#32426,#32434,#32436,.T.); +#32434 = VERTEX_POINT('',#32435); +#32435 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#32436 = LINE('',#32437,#32438); +#32437 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#32438 = VECTOR('',#32439,1.); +#32439 = DIRECTION('',(0.,0.,-1.)); +#32440 = ORIENTED_EDGE('',*,*,#32441,.T.); +#32441 = EDGE_CURVE('',#32434,#32442,#32444,.T.); +#32442 = VERTEX_POINT('',#32443); +#32443 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#32444 = LINE('',#32445,#32446); +#32445 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#32446 = VECTOR('',#32447,1.); +#32447 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32448 = ORIENTED_EDGE('',*,*,#32449,.T.); +#32449 = EDGE_CURVE('',#32442,#32450,#32452,.T.); +#32450 = VERTEX_POINT('',#32451); +#32451 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32452 = LINE('',#32453,#32454); +#32453 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#32454 = VECTOR('',#32455,1.); +#32455 = DIRECTION('',(0.,0.,1.)); +#32456 = ORIENTED_EDGE('',*,*,#32457,.T.); +#32457 = EDGE_CURVE('',#32450,#27622,#32458,.T.); +#32458 = LINE('',#32459,#32460); +#32459 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32460 = VECTOR('',#32461,1.); +#32461 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32462 = ORIENTED_EDGE('',*,*,#27629,.F.); +#32463 = ORIENTED_EDGE('',*,*,#32408,.T.); +#32464 = PLANE('',#32465); +#32465 = AXIS2_PLACEMENT_3D('',#32466,#32467,#32468); +#32466 = CARTESIAN_POINT('',(-0.1,-40.64,3.911477598424)); +#32467 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32468 = DIRECTION('',(0.,0.,1.)); +#32469 = ADVANCED_FACE('',(#32470),#32488,.T.); +#32470 = FACE_BOUND('',#32471,.T.); +#32471 = EDGE_LOOP('',(#32472,#32480,#32486,#32487)); +#32472 = ORIENTED_EDGE('',*,*,#32473,.T.); +#32473 = EDGE_CURVE('',#32450,#32474,#32476,.T.); +#32474 = VERTEX_POINT('',#32475); +#32475 = CARTESIAN_POINT('',(0.1,-40.39,7.35)); +#32476 = LINE('',#32477,#32478); +#32477 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32478 = VECTOR('',#32479,1.); +#32479 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32480 = ORIENTED_EDGE('',*,*,#32481,.T.); +#32481 = EDGE_CURVE('',#32474,#27614,#32482,.T.); +#32482 = LINE('',#32483,#32484); +#32483 = CARTESIAN_POINT('',(0.1,-40.39,7.35)); +#32484 = VECTOR('',#32485,1.); +#32485 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32486 = ORIENTED_EDGE('',*,*,#27621,.F.); +#32487 = ORIENTED_EDGE('',*,*,#32457,.F.); +#32488 = PLANE('',#32489); +#32489 = AXIS2_PLACEMENT_3D('',#32490,#32491,#32492); +#32490 = CARTESIAN_POINT('',(-0.1,-40.39,7.35)); +#32491 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32492 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32493 = ADVANCED_FACE('',(#32494),#32530,.F.); +#32494 = FACE_BOUND('',#32495,.F.); +#32495 = EDGE_LOOP('',(#32496,#32497,#32505,#32513,#32521,#32527,#32528, + #32529)); +#32496 = ORIENTED_EDGE('',*,*,#27709,.F.); +#32497 = ORIENTED_EDGE('',*,*,#32498,.T.); +#32498 = EDGE_CURVE('',#27702,#32499,#32501,.T.); +#32499 = VERTEX_POINT('',#32500); +#32500 = CARTESIAN_POINT('',(0.1,-40.89,7.35)); +#32501 = LINE('',#32502,#32503); +#32502 = CARTESIAN_POINT('',(0.1,-40.94,7.4)); +#32503 = VECTOR('',#32504,1.); +#32504 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32505 = ORIENTED_EDGE('',*,*,#32506,.T.); +#32506 = EDGE_CURVE('',#32499,#32507,#32509,.T.); +#32507 = VERTEX_POINT('',#32508); +#32508 = CARTESIAN_POINT('',(0.1,-40.89,1.25)); +#32509 = LINE('',#32510,#32511); +#32510 = CARTESIAN_POINT('',(0.1,-40.89,7.35)); +#32511 = VECTOR('',#32512,1.); +#32512 = DIRECTION('',(0.,0.,-1.)); +#32513 = ORIENTED_EDGE('',*,*,#32514,.T.); +#32514 = EDGE_CURVE('',#32507,#32515,#32517,.T.); +#32515 = VERTEX_POINT('',#32516); +#32516 = CARTESIAN_POINT('',(0.1,-40.39,1.25)); +#32517 = LINE('',#32518,#32519); +#32518 = CARTESIAN_POINT('',(0.1,-40.89,1.25)); +#32519 = VECTOR('',#32520,1.); +#32520 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32521 = ORIENTED_EDGE('',*,*,#32522,.T.); +#32522 = EDGE_CURVE('',#32515,#32474,#32523,.T.); +#32523 = LINE('',#32524,#32525); +#32524 = CARTESIAN_POINT('',(0.1,-40.39,1.25)); +#32525 = VECTOR('',#32526,1.); +#32526 = DIRECTION('',(0.,0.,1.)); +#32527 = ORIENTED_EDGE('',*,*,#32481,.T.); +#32528 = ORIENTED_EDGE('',*,*,#27613,.F.); +#32529 = ORIENTED_EDGE('',*,*,#32393,.T.); +#32530 = PLANE('',#32531); +#32531 = AXIS2_PLACEMENT_3D('',#32532,#32533,#32534); +#32532 = CARTESIAN_POINT('',(0.1,-40.64,3.911477598424)); +#32533 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32534 = DIRECTION('',(0.,0.,1.)); +#32535 = ADVANCED_FACE('',(#32536),#32547,.T.); +#32536 = FACE_BOUND('',#32537,.T.); +#32537 = EDGE_LOOP('',(#32538,#32539,#32540,#32546)); +#32538 = ORIENTED_EDGE('',*,*,#27701,.T.); +#32539 = ORIENTED_EDGE('',*,*,#32498,.T.); +#32540 = ORIENTED_EDGE('',*,*,#32541,.F.); +#32541 = EDGE_CURVE('',#32426,#32499,#32542,.T.); +#32542 = LINE('',#32543,#32544); +#32543 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#32544 = VECTOR('',#32545,1.); +#32545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32546 = ORIENTED_EDGE('',*,*,#32425,.F.); +#32547 = PLANE('',#32548); +#32548 = AXIS2_PLACEMENT_3D('',#32549,#32550,#32551); +#32549 = CARTESIAN_POINT('',(-0.1,-40.94,7.4)); +#32550 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32551 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32552 = ADVANCED_FACE('',(#32553),#32564,.T.); +#32553 = FACE_BOUND('',#32554,.T.); +#32554 = EDGE_LOOP('',(#32555,#32556,#32557,#32558)); +#32555 = ORIENTED_EDGE('',*,*,#27877,.T.); +#32556 = ORIENTED_EDGE('',*,*,#27740,.T.); +#32557 = ORIENTED_EDGE('',*,*,#27765,.T.); +#32558 = ORIENTED_EDGE('',*,*,#32559,.T.); +#32559 = EDGE_CURVE('',#27766,#27870,#32560,.T.); +#32560 = LINE('',#32561,#32562); +#32561 = CARTESIAN_POINT('',(0.1,-38.1,0.9)); +#32562 = VECTOR('',#32563,1.); +#32563 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32564 = PLANE('',#32565); +#32565 = AXIS2_PLACEMENT_3D('',#32566,#32567,#32568); +#32566 = CARTESIAN_POINT('',(-4.323624791525E-15,-38.1,0.9)); +#32567 = DIRECTION('',(0.,0.,1.)); +#32568 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32569 = ADVANCED_FACE('',(#32570),#32581,.T.); +#32570 = FACE_BOUND('',#32571,.T.); +#32571 = EDGE_LOOP('',(#32572,#32573,#32579,#32580)); +#32572 = ORIENTED_EDGE('',*,*,#27845,.T.); +#32573 = ORIENTED_EDGE('',*,*,#32574,.F.); +#32574 = EDGE_CURVE('',#27790,#27846,#32575,.T.); +#32575 = LINE('',#32576,#32577); +#32576 = CARTESIAN_POINT('',(-0.1,-38.1,0.9)); +#32577 = VECTOR('',#32578,1.); +#32578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32579 = ORIENTED_EDGE('',*,*,#27797,.T.); +#32580 = ORIENTED_EDGE('',*,*,#27820,.T.); +#32581 = PLANE('',#32582); +#32582 = AXIS2_PLACEMENT_3D('',#32583,#32584,#32585); +#32583 = CARTESIAN_POINT('',(-4.323624791525E-15,-38.1,0.9)); +#32584 = DIRECTION('',(0.,0.,1.)); +#32585 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32586 = ADVANCED_FACE('',(#32587),#32630,.T.); +#32587 = FACE_BOUND('',#32588,.T.); +#32588 = EDGE_LOOP('',(#32589,#32590,#32598,#32606,#32614,#32622,#32628, + #32629)); +#32589 = ORIENTED_EDGE('',*,*,#27853,.F.); +#32590 = ORIENTED_EDGE('',*,*,#32591,.T.); +#32591 = EDGE_CURVE('',#27854,#32592,#32594,.T.); +#32592 = VERTEX_POINT('',#32593); +#32593 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#32594 = LINE('',#32595,#32596); +#32595 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#32596 = VECTOR('',#32597,1.); +#32597 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32598 = ORIENTED_EDGE('',*,*,#32599,.T.); +#32599 = EDGE_CURVE('',#32592,#32600,#32602,.T.); +#32600 = VERTEX_POINT('',#32601); +#32601 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#32602 = LINE('',#32603,#32604); +#32603 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#32604 = VECTOR('',#32605,1.); +#32605 = DIRECTION('',(0.,0.,-1.)); +#32606 = ORIENTED_EDGE('',*,*,#32607,.T.); +#32607 = EDGE_CURVE('',#32600,#32608,#32610,.T.); +#32608 = VERTEX_POINT('',#32609); +#32609 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#32610 = LINE('',#32611,#32612); +#32611 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#32612 = VECTOR('',#32613,1.); +#32613 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32614 = ORIENTED_EDGE('',*,*,#32615,.T.); +#32615 = EDGE_CURVE('',#32608,#32616,#32618,.T.); +#32616 = VERTEX_POINT('',#32617); +#32617 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32618 = LINE('',#32619,#32620); +#32619 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#32620 = VECTOR('',#32621,1.); +#32621 = DIRECTION('',(0.,0.,1.)); +#32622 = ORIENTED_EDGE('',*,*,#32623,.T.); +#32623 = EDGE_CURVE('',#32616,#27782,#32624,.T.); +#32624 = LINE('',#32625,#32626); +#32625 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32626 = VECTOR('',#32627,1.); +#32627 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32628 = ORIENTED_EDGE('',*,*,#27789,.F.); +#32629 = ORIENTED_EDGE('',*,*,#32574,.T.); +#32630 = PLANE('',#32631); +#32631 = AXIS2_PLACEMENT_3D('',#32632,#32633,#32634); +#32632 = CARTESIAN_POINT('',(-0.1,-38.1,3.911477598424)); +#32633 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32634 = DIRECTION('',(0.,0.,1.)); +#32635 = ADVANCED_FACE('',(#32636),#32654,.T.); +#32636 = FACE_BOUND('',#32637,.T.); +#32637 = EDGE_LOOP('',(#32638,#32646,#32652,#32653)); +#32638 = ORIENTED_EDGE('',*,*,#32639,.T.); +#32639 = EDGE_CURVE('',#32616,#32640,#32642,.T.); +#32640 = VERTEX_POINT('',#32641); +#32641 = CARTESIAN_POINT('',(0.1,-37.85,7.35)); +#32642 = LINE('',#32643,#32644); +#32643 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32644 = VECTOR('',#32645,1.); +#32645 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32646 = ORIENTED_EDGE('',*,*,#32647,.T.); +#32647 = EDGE_CURVE('',#32640,#27774,#32648,.T.); +#32648 = LINE('',#32649,#32650); +#32649 = CARTESIAN_POINT('',(0.1,-37.85,7.35)); +#32650 = VECTOR('',#32651,1.); +#32651 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32652 = ORIENTED_EDGE('',*,*,#27781,.F.); +#32653 = ORIENTED_EDGE('',*,*,#32623,.F.); +#32654 = PLANE('',#32655); +#32655 = AXIS2_PLACEMENT_3D('',#32656,#32657,#32658); +#32656 = CARTESIAN_POINT('',(-0.1,-37.85,7.35)); +#32657 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32658 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32659 = ADVANCED_FACE('',(#32660),#32696,.F.); +#32660 = FACE_BOUND('',#32661,.F.); +#32661 = EDGE_LOOP('',(#32662,#32663,#32671,#32679,#32687,#32693,#32694, + #32695)); +#32662 = ORIENTED_EDGE('',*,*,#27869,.F.); +#32663 = ORIENTED_EDGE('',*,*,#32664,.T.); +#32664 = EDGE_CURVE('',#27862,#32665,#32667,.T.); +#32665 = VERTEX_POINT('',#32666); +#32666 = CARTESIAN_POINT('',(0.1,-38.35,7.35)); +#32667 = LINE('',#32668,#32669); +#32668 = CARTESIAN_POINT('',(0.1,-38.4,7.4)); +#32669 = VECTOR('',#32670,1.); +#32670 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32671 = ORIENTED_EDGE('',*,*,#32672,.T.); +#32672 = EDGE_CURVE('',#32665,#32673,#32675,.T.); +#32673 = VERTEX_POINT('',#32674); +#32674 = CARTESIAN_POINT('',(0.1,-38.35,1.25)); +#32675 = LINE('',#32676,#32677); +#32676 = CARTESIAN_POINT('',(0.1,-38.35,7.35)); +#32677 = VECTOR('',#32678,1.); +#32678 = DIRECTION('',(0.,0.,-1.)); +#32679 = ORIENTED_EDGE('',*,*,#32680,.T.); +#32680 = EDGE_CURVE('',#32673,#32681,#32683,.T.); +#32681 = VERTEX_POINT('',#32682); +#32682 = CARTESIAN_POINT('',(0.1,-37.85,1.25)); +#32683 = LINE('',#32684,#32685); +#32684 = CARTESIAN_POINT('',(0.1,-38.35,1.25)); +#32685 = VECTOR('',#32686,1.); +#32686 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32687 = ORIENTED_EDGE('',*,*,#32688,.T.); +#32688 = EDGE_CURVE('',#32681,#32640,#32689,.T.); +#32689 = LINE('',#32690,#32691); +#32690 = CARTESIAN_POINT('',(0.1,-37.85,1.25)); +#32691 = VECTOR('',#32692,1.); +#32692 = DIRECTION('',(0.,0.,1.)); +#32693 = ORIENTED_EDGE('',*,*,#32647,.T.); +#32694 = ORIENTED_EDGE('',*,*,#27773,.F.); +#32695 = ORIENTED_EDGE('',*,*,#32559,.T.); +#32696 = PLANE('',#32697); +#32697 = AXIS2_PLACEMENT_3D('',#32698,#32699,#32700); +#32698 = CARTESIAN_POINT('',(0.1,-38.1,3.911477598424)); +#32699 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32700 = DIRECTION('',(0.,0.,1.)); +#32701 = ADVANCED_FACE('',(#32702),#32713,.T.); +#32702 = FACE_BOUND('',#32703,.T.); +#32703 = EDGE_LOOP('',(#32704,#32705,#32706,#32712)); +#32704 = ORIENTED_EDGE('',*,*,#27861,.T.); +#32705 = ORIENTED_EDGE('',*,*,#32664,.T.); +#32706 = ORIENTED_EDGE('',*,*,#32707,.F.); +#32707 = EDGE_CURVE('',#32592,#32665,#32708,.T.); +#32708 = LINE('',#32709,#32710); +#32709 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#32710 = VECTOR('',#32711,1.); +#32711 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32712 = ORIENTED_EDGE('',*,*,#32591,.F.); +#32713 = PLANE('',#32714); +#32714 = AXIS2_PLACEMENT_3D('',#32715,#32716,#32717); +#32715 = CARTESIAN_POINT('',(-0.1,-38.4,7.4)); +#32716 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32717 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32718 = ADVANCED_FACE('',(#32719),#32730,.T.); +#32719 = FACE_BOUND('',#32720,.T.); +#32720 = EDGE_LOOP('',(#32721,#32722,#32723,#32724)); +#32721 = ORIENTED_EDGE('',*,*,#28037,.T.); +#32722 = ORIENTED_EDGE('',*,*,#27900,.T.); +#32723 = ORIENTED_EDGE('',*,*,#27925,.T.); +#32724 = ORIENTED_EDGE('',*,*,#32725,.T.); +#32725 = EDGE_CURVE('',#27926,#28030,#32726,.T.); +#32726 = LINE('',#32727,#32728); +#32727 = CARTESIAN_POINT('',(0.1,-35.56,0.9)); +#32728 = VECTOR('',#32729,1.); +#32729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32730 = PLANE('',#32731); +#32731 = AXIS2_PLACEMENT_3D('',#32732,#32733,#32734); +#32732 = CARTESIAN_POINT('',(-4.04162814327E-15,-35.56,0.9)); +#32733 = DIRECTION('',(0.,0.,1.)); +#32734 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32735 = ADVANCED_FACE('',(#32736),#32747,.T.); +#32736 = FACE_BOUND('',#32737,.T.); +#32737 = EDGE_LOOP('',(#32738,#32739,#32745,#32746)); +#32738 = ORIENTED_EDGE('',*,*,#28005,.T.); +#32739 = ORIENTED_EDGE('',*,*,#32740,.F.); +#32740 = EDGE_CURVE('',#27950,#28006,#32741,.T.); +#32741 = LINE('',#32742,#32743); +#32742 = CARTESIAN_POINT('',(-0.1,-35.56,0.9)); +#32743 = VECTOR('',#32744,1.); +#32744 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32745 = ORIENTED_EDGE('',*,*,#27957,.T.); +#32746 = ORIENTED_EDGE('',*,*,#27980,.T.); +#32747 = PLANE('',#32748); +#32748 = AXIS2_PLACEMENT_3D('',#32749,#32750,#32751); +#32749 = CARTESIAN_POINT('',(-4.04162814327E-15,-35.56,0.9)); +#32750 = DIRECTION('',(0.,0.,1.)); +#32751 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32752 = ADVANCED_FACE('',(#32753),#32796,.T.); +#32753 = FACE_BOUND('',#32754,.T.); +#32754 = EDGE_LOOP('',(#32755,#32756,#32764,#32772,#32780,#32788,#32794, + #32795)); +#32755 = ORIENTED_EDGE('',*,*,#28013,.F.); +#32756 = ORIENTED_EDGE('',*,*,#32757,.T.); +#32757 = EDGE_CURVE('',#28014,#32758,#32760,.T.); +#32758 = VERTEX_POINT('',#32759); +#32759 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#32760 = LINE('',#32761,#32762); +#32761 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#32762 = VECTOR('',#32763,1.); +#32763 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32764 = ORIENTED_EDGE('',*,*,#32765,.T.); +#32765 = EDGE_CURVE('',#32758,#32766,#32768,.T.); +#32766 = VERTEX_POINT('',#32767); +#32767 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#32768 = LINE('',#32769,#32770); +#32769 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#32770 = VECTOR('',#32771,1.); +#32771 = DIRECTION('',(0.,0.,-1.)); +#32772 = ORIENTED_EDGE('',*,*,#32773,.T.); +#32773 = EDGE_CURVE('',#32766,#32774,#32776,.T.); +#32774 = VERTEX_POINT('',#32775); +#32775 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#32776 = LINE('',#32777,#32778); +#32777 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#32778 = VECTOR('',#32779,1.); +#32779 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32780 = ORIENTED_EDGE('',*,*,#32781,.T.); +#32781 = EDGE_CURVE('',#32774,#32782,#32784,.T.); +#32782 = VERTEX_POINT('',#32783); +#32783 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32784 = LINE('',#32785,#32786); +#32785 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#32786 = VECTOR('',#32787,1.); +#32787 = DIRECTION('',(0.,0.,1.)); +#32788 = ORIENTED_EDGE('',*,*,#32789,.T.); +#32789 = EDGE_CURVE('',#32782,#27942,#32790,.T.); +#32790 = LINE('',#32791,#32792); +#32791 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32792 = VECTOR('',#32793,1.); +#32793 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32794 = ORIENTED_EDGE('',*,*,#27949,.F.); +#32795 = ORIENTED_EDGE('',*,*,#32740,.T.); +#32796 = PLANE('',#32797); +#32797 = AXIS2_PLACEMENT_3D('',#32798,#32799,#32800); +#32798 = CARTESIAN_POINT('',(-0.1,-35.56,3.911477598424)); +#32799 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32800 = DIRECTION('',(0.,0.,1.)); +#32801 = ADVANCED_FACE('',(#32802),#32820,.T.); +#32802 = FACE_BOUND('',#32803,.T.); +#32803 = EDGE_LOOP('',(#32804,#32812,#32818,#32819)); +#32804 = ORIENTED_EDGE('',*,*,#32805,.T.); +#32805 = EDGE_CURVE('',#32782,#32806,#32808,.T.); +#32806 = VERTEX_POINT('',#32807); +#32807 = CARTESIAN_POINT('',(0.1,-35.31,7.35)); +#32808 = LINE('',#32809,#32810); +#32809 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32810 = VECTOR('',#32811,1.); +#32811 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32812 = ORIENTED_EDGE('',*,*,#32813,.T.); +#32813 = EDGE_CURVE('',#32806,#27934,#32814,.T.); +#32814 = LINE('',#32815,#32816); +#32815 = CARTESIAN_POINT('',(0.1,-35.31,7.35)); +#32816 = VECTOR('',#32817,1.); +#32817 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32818 = ORIENTED_EDGE('',*,*,#27941,.F.); +#32819 = ORIENTED_EDGE('',*,*,#32789,.F.); +#32820 = PLANE('',#32821); +#32821 = AXIS2_PLACEMENT_3D('',#32822,#32823,#32824); +#32822 = CARTESIAN_POINT('',(-0.1,-35.31,7.35)); +#32823 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32824 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32825 = ADVANCED_FACE('',(#32826),#32862,.F.); +#32826 = FACE_BOUND('',#32827,.F.); +#32827 = EDGE_LOOP('',(#32828,#32829,#32837,#32845,#32853,#32859,#32860, + #32861)); +#32828 = ORIENTED_EDGE('',*,*,#28029,.F.); +#32829 = ORIENTED_EDGE('',*,*,#32830,.T.); +#32830 = EDGE_CURVE('',#28022,#32831,#32833,.T.); +#32831 = VERTEX_POINT('',#32832); +#32832 = CARTESIAN_POINT('',(0.1,-35.81,7.35)); +#32833 = LINE('',#32834,#32835); +#32834 = CARTESIAN_POINT('',(0.1,-35.86,7.4)); +#32835 = VECTOR('',#32836,1.); +#32836 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32837 = ORIENTED_EDGE('',*,*,#32838,.T.); +#32838 = EDGE_CURVE('',#32831,#32839,#32841,.T.); +#32839 = VERTEX_POINT('',#32840); +#32840 = CARTESIAN_POINT('',(0.1,-35.81,1.25)); +#32841 = LINE('',#32842,#32843); +#32842 = CARTESIAN_POINT('',(0.1,-35.81,7.35)); +#32843 = VECTOR('',#32844,1.); +#32844 = DIRECTION('',(0.,0.,-1.)); +#32845 = ORIENTED_EDGE('',*,*,#32846,.T.); +#32846 = EDGE_CURVE('',#32839,#32847,#32849,.T.); +#32847 = VERTEX_POINT('',#32848); +#32848 = CARTESIAN_POINT('',(0.1,-35.31,1.25)); +#32849 = LINE('',#32850,#32851); +#32850 = CARTESIAN_POINT('',(0.1,-35.81,1.25)); +#32851 = VECTOR('',#32852,1.); +#32852 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32853 = ORIENTED_EDGE('',*,*,#32854,.T.); +#32854 = EDGE_CURVE('',#32847,#32806,#32855,.T.); +#32855 = LINE('',#32856,#32857); +#32856 = CARTESIAN_POINT('',(0.1,-35.31,1.25)); +#32857 = VECTOR('',#32858,1.); +#32858 = DIRECTION('',(0.,0.,1.)); +#32859 = ORIENTED_EDGE('',*,*,#32813,.T.); +#32860 = ORIENTED_EDGE('',*,*,#27933,.F.); +#32861 = ORIENTED_EDGE('',*,*,#32725,.T.); +#32862 = PLANE('',#32863); +#32863 = AXIS2_PLACEMENT_3D('',#32864,#32865,#32866); +#32864 = CARTESIAN_POINT('',(0.1,-35.56,3.911477598424)); +#32865 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32866 = DIRECTION('',(0.,0.,1.)); +#32867 = ADVANCED_FACE('',(#32868),#32879,.T.); +#32868 = FACE_BOUND('',#32869,.T.); +#32869 = EDGE_LOOP('',(#32870,#32871,#32872,#32878)); +#32870 = ORIENTED_EDGE('',*,*,#28021,.T.); +#32871 = ORIENTED_EDGE('',*,*,#32830,.T.); +#32872 = ORIENTED_EDGE('',*,*,#32873,.F.); +#32873 = EDGE_CURVE('',#32758,#32831,#32874,.T.); +#32874 = LINE('',#32875,#32876); +#32875 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#32876 = VECTOR('',#32877,1.); +#32877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32878 = ORIENTED_EDGE('',*,*,#32757,.F.); +#32879 = PLANE('',#32880); +#32880 = AXIS2_PLACEMENT_3D('',#32881,#32882,#32883); +#32881 = CARTESIAN_POINT('',(-0.1,-35.86,7.4)); +#32882 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32883 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32884 = ADVANCED_FACE('',(#32885),#32896,.T.); +#32885 = FACE_BOUND('',#32886,.T.); +#32886 = EDGE_LOOP('',(#32887,#32888,#32889,#32890)); +#32887 = ORIENTED_EDGE('',*,*,#28197,.T.); +#32888 = ORIENTED_EDGE('',*,*,#28060,.T.); +#32889 = ORIENTED_EDGE('',*,*,#28085,.T.); +#32890 = ORIENTED_EDGE('',*,*,#32891,.T.); +#32891 = EDGE_CURVE('',#28086,#28190,#32892,.T.); +#32892 = LINE('',#32893,#32894); +#32893 = CARTESIAN_POINT('',(0.1,-33.02,0.9)); +#32894 = VECTOR('',#32895,1.); +#32895 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32896 = PLANE('',#32897); +#32897 = AXIS2_PLACEMENT_3D('',#32898,#32899,#32900); +#32898 = CARTESIAN_POINT('',(-3.759631495015E-15,-33.02,0.9)); +#32899 = DIRECTION('',(0.,0.,1.)); +#32900 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32901 = ADVANCED_FACE('',(#32902),#32913,.T.); +#32902 = FACE_BOUND('',#32903,.T.); +#32903 = EDGE_LOOP('',(#32904,#32905,#32911,#32912)); +#32904 = ORIENTED_EDGE('',*,*,#28165,.T.); +#32905 = ORIENTED_EDGE('',*,*,#32906,.F.); +#32906 = EDGE_CURVE('',#28110,#28166,#32907,.T.); +#32907 = LINE('',#32908,#32909); +#32908 = CARTESIAN_POINT('',(-0.1,-33.02,0.9)); +#32909 = VECTOR('',#32910,1.); +#32910 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#32911 = ORIENTED_EDGE('',*,*,#28117,.T.); +#32912 = ORIENTED_EDGE('',*,*,#28140,.T.); +#32913 = PLANE('',#32914); +#32914 = AXIS2_PLACEMENT_3D('',#32915,#32916,#32917); +#32915 = CARTESIAN_POINT('',(-3.759631495015E-15,-33.02,0.9)); +#32916 = DIRECTION('',(0.,0.,1.)); +#32917 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#32918 = ADVANCED_FACE('',(#32919),#32962,.T.); +#32919 = FACE_BOUND('',#32920,.T.); +#32920 = EDGE_LOOP('',(#32921,#32922,#32930,#32938,#32946,#32954,#32960, + #32961)); +#32921 = ORIENTED_EDGE('',*,*,#28173,.F.); +#32922 = ORIENTED_EDGE('',*,*,#32923,.T.); +#32923 = EDGE_CURVE('',#28174,#32924,#32926,.T.); +#32924 = VERTEX_POINT('',#32925); +#32925 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#32926 = LINE('',#32927,#32928); +#32927 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#32928 = VECTOR('',#32929,1.); +#32929 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#32930 = ORIENTED_EDGE('',*,*,#32931,.T.); +#32931 = EDGE_CURVE('',#32924,#32932,#32934,.T.); +#32932 = VERTEX_POINT('',#32933); +#32933 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#32934 = LINE('',#32935,#32936); +#32935 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#32936 = VECTOR('',#32937,1.); +#32937 = DIRECTION('',(0.,0.,-1.)); +#32938 = ORIENTED_EDGE('',*,*,#32939,.T.); +#32939 = EDGE_CURVE('',#32932,#32940,#32942,.T.); +#32940 = VERTEX_POINT('',#32941); +#32941 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#32942 = LINE('',#32943,#32944); +#32943 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#32944 = VECTOR('',#32945,1.); +#32945 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#32946 = ORIENTED_EDGE('',*,*,#32947,.T.); +#32947 = EDGE_CURVE('',#32940,#32948,#32950,.T.); +#32948 = VERTEX_POINT('',#32949); +#32949 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32950 = LINE('',#32951,#32952); +#32951 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#32952 = VECTOR('',#32953,1.); +#32953 = DIRECTION('',(0.,0.,1.)); +#32954 = ORIENTED_EDGE('',*,*,#32955,.T.); +#32955 = EDGE_CURVE('',#32948,#28102,#32956,.T.); +#32956 = LINE('',#32957,#32958); +#32957 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32958 = VECTOR('',#32959,1.); +#32959 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32960 = ORIENTED_EDGE('',*,*,#28109,.F.); +#32961 = ORIENTED_EDGE('',*,*,#32906,.T.); +#32962 = PLANE('',#32963); +#32963 = AXIS2_PLACEMENT_3D('',#32964,#32965,#32966); +#32964 = CARTESIAN_POINT('',(-0.1,-33.02,3.911477598424)); +#32965 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#32966 = DIRECTION('',(0.,0.,1.)); +#32967 = ADVANCED_FACE('',(#32968),#32986,.T.); +#32968 = FACE_BOUND('',#32969,.T.); +#32969 = EDGE_LOOP('',(#32970,#32978,#32984,#32985)); +#32970 = ORIENTED_EDGE('',*,*,#32971,.T.); +#32971 = EDGE_CURVE('',#32948,#32972,#32974,.T.); +#32972 = VERTEX_POINT('',#32973); +#32973 = CARTESIAN_POINT('',(0.1,-32.77,7.35)); +#32974 = LINE('',#32975,#32976); +#32975 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32976 = VECTOR('',#32977,1.); +#32977 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#32978 = ORIENTED_EDGE('',*,*,#32979,.T.); +#32979 = EDGE_CURVE('',#32972,#28094,#32980,.T.); +#32980 = LINE('',#32981,#32982); +#32981 = CARTESIAN_POINT('',(0.1,-32.77,7.35)); +#32982 = VECTOR('',#32983,1.); +#32983 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32984 = ORIENTED_EDGE('',*,*,#28101,.F.); +#32985 = ORIENTED_EDGE('',*,*,#32955,.F.); +#32986 = PLANE('',#32987); +#32987 = AXIS2_PLACEMENT_3D('',#32988,#32989,#32990); +#32988 = CARTESIAN_POINT('',(-0.1,-32.77,7.35)); +#32989 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#32990 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#32991 = ADVANCED_FACE('',(#32992),#33028,.F.); +#32992 = FACE_BOUND('',#32993,.F.); +#32993 = EDGE_LOOP('',(#32994,#32995,#33003,#33011,#33019,#33025,#33026, + #33027)); +#32994 = ORIENTED_EDGE('',*,*,#28189,.F.); +#32995 = ORIENTED_EDGE('',*,*,#32996,.T.); +#32996 = EDGE_CURVE('',#28182,#32997,#32999,.T.); +#32997 = VERTEX_POINT('',#32998); +#32998 = CARTESIAN_POINT('',(0.1,-33.27,7.35)); +#32999 = LINE('',#33000,#33001); +#33000 = CARTESIAN_POINT('',(0.1,-33.32,7.4)); +#33001 = VECTOR('',#33002,1.); +#33002 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33003 = ORIENTED_EDGE('',*,*,#33004,.T.); +#33004 = EDGE_CURVE('',#32997,#33005,#33007,.T.); +#33005 = VERTEX_POINT('',#33006); +#33006 = CARTESIAN_POINT('',(0.1,-33.27,1.25)); +#33007 = LINE('',#33008,#33009); +#33008 = CARTESIAN_POINT('',(0.1,-33.27,7.35)); +#33009 = VECTOR('',#33010,1.); +#33010 = DIRECTION('',(0.,0.,-1.)); +#33011 = ORIENTED_EDGE('',*,*,#33012,.T.); +#33012 = EDGE_CURVE('',#33005,#33013,#33015,.T.); +#33013 = VERTEX_POINT('',#33014); +#33014 = CARTESIAN_POINT('',(0.1,-32.77,1.25)); +#33015 = LINE('',#33016,#33017); +#33016 = CARTESIAN_POINT('',(0.1,-33.27,1.25)); +#33017 = VECTOR('',#33018,1.); +#33018 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33019 = ORIENTED_EDGE('',*,*,#33020,.T.); +#33020 = EDGE_CURVE('',#33013,#32972,#33021,.T.); +#33021 = LINE('',#33022,#33023); +#33022 = CARTESIAN_POINT('',(0.1,-32.77,1.25)); +#33023 = VECTOR('',#33024,1.); +#33024 = DIRECTION('',(0.,0.,1.)); +#33025 = ORIENTED_EDGE('',*,*,#32979,.T.); +#33026 = ORIENTED_EDGE('',*,*,#28093,.F.); +#33027 = ORIENTED_EDGE('',*,*,#32891,.T.); +#33028 = PLANE('',#33029); +#33029 = AXIS2_PLACEMENT_3D('',#33030,#33031,#33032); +#33030 = CARTESIAN_POINT('',(0.1,-33.02,3.911477598424)); +#33031 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33032 = DIRECTION('',(0.,0.,1.)); +#33033 = ADVANCED_FACE('',(#33034),#33045,.T.); +#33034 = FACE_BOUND('',#33035,.T.); +#33035 = EDGE_LOOP('',(#33036,#33037,#33038,#33044)); +#33036 = ORIENTED_EDGE('',*,*,#28181,.T.); +#33037 = ORIENTED_EDGE('',*,*,#32996,.T.); +#33038 = ORIENTED_EDGE('',*,*,#33039,.F.); +#33039 = EDGE_CURVE('',#32924,#32997,#33040,.T.); +#33040 = LINE('',#33041,#33042); +#33041 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#33042 = VECTOR('',#33043,1.); +#33043 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33044 = ORIENTED_EDGE('',*,*,#32923,.F.); +#33045 = PLANE('',#33046); +#33046 = AXIS2_PLACEMENT_3D('',#33047,#33048,#33049); +#33047 = CARTESIAN_POINT('',(-0.1,-33.32,7.4)); +#33048 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33049 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33050 = ADVANCED_FACE('',(#33051),#33062,.T.); +#33051 = FACE_BOUND('',#33052,.T.); +#33052 = EDGE_LOOP('',(#33053,#33054,#33055,#33056)); +#33053 = ORIENTED_EDGE('',*,*,#28357,.T.); +#33054 = ORIENTED_EDGE('',*,*,#28220,.T.); +#33055 = ORIENTED_EDGE('',*,*,#28245,.T.); +#33056 = ORIENTED_EDGE('',*,*,#33057,.T.); +#33057 = EDGE_CURVE('',#28246,#28350,#33058,.T.); +#33058 = LINE('',#33059,#33060); +#33059 = CARTESIAN_POINT('',(0.1,-30.48,0.9)); +#33060 = VECTOR('',#33061,1.); +#33061 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33062 = PLANE('',#33063); +#33063 = AXIS2_PLACEMENT_3D('',#33064,#33065,#33066); +#33064 = CARTESIAN_POINT('',(-3.47763484676E-15,-30.48,0.9)); +#33065 = DIRECTION('',(0.,0.,1.)); +#33066 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33067 = ADVANCED_FACE('',(#33068),#33079,.T.); +#33068 = FACE_BOUND('',#33069,.T.); +#33069 = EDGE_LOOP('',(#33070,#33071,#33077,#33078)); +#33070 = ORIENTED_EDGE('',*,*,#28325,.T.); +#33071 = ORIENTED_EDGE('',*,*,#33072,.F.); +#33072 = EDGE_CURVE('',#28270,#28326,#33073,.T.); +#33073 = LINE('',#33074,#33075); +#33074 = CARTESIAN_POINT('',(-0.1,-30.48,0.9)); +#33075 = VECTOR('',#33076,1.); +#33076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33077 = ORIENTED_EDGE('',*,*,#28277,.T.); +#33078 = ORIENTED_EDGE('',*,*,#28300,.T.); +#33079 = PLANE('',#33080); +#33080 = AXIS2_PLACEMENT_3D('',#33081,#33082,#33083); +#33081 = CARTESIAN_POINT('',(-3.47763484676E-15,-30.48,0.9)); +#33082 = DIRECTION('',(0.,0.,1.)); +#33083 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33084 = ADVANCED_FACE('',(#33085),#33128,.T.); +#33085 = FACE_BOUND('',#33086,.T.); +#33086 = EDGE_LOOP('',(#33087,#33088,#33096,#33104,#33112,#33120,#33126, + #33127)); +#33087 = ORIENTED_EDGE('',*,*,#28333,.F.); +#33088 = ORIENTED_EDGE('',*,*,#33089,.T.); +#33089 = EDGE_CURVE('',#28334,#33090,#33092,.T.); +#33090 = VERTEX_POINT('',#33091); +#33091 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#33092 = LINE('',#33093,#33094); +#33093 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#33094 = VECTOR('',#33095,1.); +#33095 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33096 = ORIENTED_EDGE('',*,*,#33097,.T.); +#33097 = EDGE_CURVE('',#33090,#33098,#33100,.T.); +#33098 = VERTEX_POINT('',#33099); +#33099 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#33100 = LINE('',#33101,#33102); +#33101 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#33102 = VECTOR('',#33103,1.); +#33103 = DIRECTION('',(0.,0.,-1.)); +#33104 = ORIENTED_EDGE('',*,*,#33105,.T.); +#33105 = EDGE_CURVE('',#33098,#33106,#33108,.T.); +#33106 = VERTEX_POINT('',#33107); +#33107 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#33108 = LINE('',#33109,#33110); +#33109 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#33110 = VECTOR('',#33111,1.); +#33111 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33112 = ORIENTED_EDGE('',*,*,#33113,.T.); +#33113 = EDGE_CURVE('',#33106,#33114,#33116,.T.); +#33114 = VERTEX_POINT('',#33115); +#33115 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33116 = LINE('',#33117,#33118); +#33117 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#33118 = VECTOR('',#33119,1.); +#33119 = DIRECTION('',(0.,0.,1.)); +#33120 = ORIENTED_EDGE('',*,*,#33121,.T.); +#33121 = EDGE_CURVE('',#33114,#28262,#33122,.T.); +#33122 = LINE('',#33123,#33124); +#33123 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33124 = VECTOR('',#33125,1.); +#33125 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33126 = ORIENTED_EDGE('',*,*,#28269,.F.); +#33127 = ORIENTED_EDGE('',*,*,#33072,.T.); +#33128 = PLANE('',#33129); +#33129 = AXIS2_PLACEMENT_3D('',#33130,#33131,#33132); +#33130 = CARTESIAN_POINT('',(-0.1,-30.48,3.911477598424)); +#33131 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33132 = DIRECTION('',(0.,0.,1.)); +#33133 = ADVANCED_FACE('',(#33134),#33152,.T.); +#33134 = FACE_BOUND('',#33135,.T.); +#33135 = EDGE_LOOP('',(#33136,#33144,#33150,#33151)); +#33136 = ORIENTED_EDGE('',*,*,#33137,.T.); +#33137 = EDGE_CURVE('',#33114,#33138,#33140,.T.); +#33138 = VERTEX_POINT('',#33139); +#33139 = CARTESIAN_POINT('',(0.1,-30.23,7.35)); +#33140 = LINE('',#33141,#33142); +#33141 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33142 = VECTOR('',#33143,1.); +#33143 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33144 = ORIENTED_EDGE('',*,*,#33145,.T.); +#33145 = EDGE_CURVE('',#33138,#28254,#33146,.T.); +#33146 = LINE('',#33147,#33148); +#33147 = CARTESIAN_POINT('',(0.1,-30.23,7.35)); +#33148 = VECTOR('',#33149,1.); +#33149 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33150 = ORIENTED_EDGE('',*,*,#28261,.F.); +#33151 = ORIENTED_EDGE('',*,*,#33121,.F.); +#33152 = PLANE('',#33153); +#33153 = AXIS2_PLACEMENT_3D('',#33154,#33155,#33156); +#33154 = CARTESIAN_POINT('',(-0.1,-30.23,7.35)); +#33155 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33156 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33157 = ADVANCED_FACE('',(#33158),#33194,.F.); +#33158 = FACE_BOUND('',#33159,.F.); +#33159 = EDGE_LOOP('',(#33160,#33161,#33169,#33177,#33185,#33191,#33192, + #33193)); +#33160 = ORIENTED_EDGE('',*,*,#28349,.F.); +#33161 = ORIENTED_EDGE('',*,*,#33162,.T.); +#33162 = EDGE_CURVE('',#28342,#33163,#33165,.T.); +#33163 = VERTEX_POINT('',#33164); +#33164 = CARTESIAN_POINT('',(0.1,-30.73,7.35)); +#33165 = LINE('',#33166,#33167); +#33166 = CARTESIAN_POINT('',(0.1,-30.78,7.4)); +#33167 = VECTOR('',#33168,1.); +#33168 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33169 = ORIENTED_EDGE('',*,*,#33170,.T.); +#33170 = EDGE_CURVE('',#33163,#33171,#33173,.T.); +#33171 = VERTEX_POINT('',#33172); +#33172 = CARTESIAN_POINT('',(0.1,-30.73,1.25)); +#33173 = LINE('',#33174,#33175); +#33174 = CARTESIAN_POINT('',(0.1,-30.73,7.35)); +#33175 = VECTOR('',#33176,1.); +#33176 = DIRECTION('',(0.,0.,-1.)); +#33177 = ORIENTED_EDGE('',*,*,#33178,.T.); +#33178 = EDGE_CURVE('',#33171,#33179,#33181,.T.); +#33179 = VERTEX_POINT('',#33180); +#33180 = CARTESIAN_POINT('',(0.1,-30.23,1.25)); +#33181 = LINE('',#33182,#33183); +#33182 = CARTESIAN_POINT('',(0.1,-30.73,1.25)); +#33183 = VECTOR('',#33184,1.); +#33184 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33185 = ORIENTED_EDGE('',*,*,#33186,.T.); +#33186 = EDGE_CURVE('',#33179,#33138,#33187,.T.); +#33187 = LINE('',#33188,#33189); +#33188 = CARTESIAN_POINT('',(0.1,-30.23,1.25)); +#33189 = VECTOR('',#33190,1.); +#33190 = DIRECTION('',(0.,0.,1.)); +#33191 = ORIENTED_EDGE('',*,*,#33145,.T.); +#33192 = ORIENTED_EDGE('',*,*,#28253,.F.); +#33193 = ORIENTED_EDGE('',*,*,#33057,.T.); +#33194 = PLANE('',#33195); +#33195 = AXIS2_PLACEMENT_3D('',#33196,#33197,#33198); +#33196 = CARTESIAN_POINT('',(0.1,-30.48,3.911477598424)); +#33197 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33198 = DIRECTION('',(0.,0.,1.)); +#33199 = ADVANCED_FACE('',(#33200),#33211,.T.); +#33200 = FACE_BOUND('',#33201,.T.); +#33201 = EDGE_LOOP('',(#33202,#33203,#33204,#33210)); +#33202 = ORIENTED_EDGE('',*,*,#28341,.T.); +#33203 = ORIENTED_EDGE('',*,*,#33162,.T.); +#33204 = ORIENTED_EDGE('',*,*,#33205,.F.); +#33205 = EDGE_CURVE('',#33090,#33163,#33206,.T.); +#33206 = LINE('',#33207,#33208); +#33207 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#33208 = VECTOR('',#33209,1.); +#33209 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33210 = ORIENTED_EDGE('',*,*,#33089,.F.); +#33211 = PLANE('',#33212); +#33212 = AXIS2_PLACEMENT_3D('',#33213,#33214,#33215); +#33213 = CARTESIAN_POINT('',(-0.1,-30.78,7.4)); +#33214 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33215 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33216 = ADVANCED_FACE('',(#33217),#33228,.T.); +#33217 = FACE_BOUND('',#33218,.T.); +#33218 = EDGE_LOOP('',(#33219,#33220,#33221,#33222)); +#33219 = ORIENTED_EDGE('',*,*,#28517,.T.); +#33220 = ORIENTED_EDGE('',*,*,#28380,.T.); +#33221 = ORIENTED_EDGE('',*,*,#28405,.T.); +#33222 = ORIENTED_EDGE('',*,*,#33223,.T.); +#33223 = EDGE_CURVE('',#28406,#28510,#33224,.T.); +#33224 = LINE('',#33225,#33226); +#33225 = CARTESIAN_POINT('',(0.1,-27.94,0.9)); +#33226 = VECTOR('',#33227,1.); +#33227 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33228 = PLANE('',#33229); +#33229 = AXIS2_PLACEMENT_3D('',#33230,#33231,#33232); +#33230 = CARTESIAN_POINT('',(-3.195638198505E-15,-27.94,0.9)); +#33231 = DIRECTION('',(0.,0.,1.)); +#33232 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33233 = ADVANCED_FACE('',(#33234),#33245,.T.); +#33234 = FACE_BOUND('',#33235,.T.); +#33235 = EDGE_LOOP('',(#33236,#33237,#33243,#33244)); +#33236 = ORIENTED_EDGE('',*,*,#28485,.T.); +#33237 = ORIENTED_EDGE('',*,*,#33238,.F.); +#33238 = EDGE_CURVE('',#28430,#28486,#33239,.T.); +#33239 = LINE('',#33240,#33241); +#33240 = CARTESIAN_POINT('',(-0.1,-27.94,0.9)); +#33241 = VECTOR('',#33242,1.); +#33242 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33243 = ORIENTED_EDGE('',*,*,#28437,.T.); +#33244 = ORIENTED_EDGE('',*,*,#28460,.T.); +#33245 = PLANE('',#33246); +#33246 = AXIS2_PLACEMENT_3D('',#33247,#33248,#33249); +#33247 = CARTESIAN_POINT('',(-3.195638198505E-15,-27.94,0.9)); +#33248 = DIRECTION('',(0.,0.,1.)); +#33249 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33250 = ADVANCED_FACE('',(#33251),#33294,.T.); +#33251 = FACE_BOUND('',#33252,.T.); +#33252 = EDGE_LOOP('',(#33253,#33254,#33262,#33270,#33278,#33286,#33292, + #33293)); +#33253 = ORIENTED_EDGE('',*,*,#28493,.F.); +#33254 = ORIENTED_EDGE('',*,*,#33255,.T.); +#33255 = EDGE_CURVE('',#28494,#33256,#33258,.T.); +#33256 = VERTEX_POINT('',#33257); +#33257 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#33258 = LINE('',#33259,#33260); +#33259 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#33260 = VECTOR('',#33261,1.); +#33261 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33262 = ORIENTED_EDGE('',*,*,#33263,.T.); +#33263 = EDGE_CURVE('',#33256,#33264,#33266,.T.); +#33264 = VERTEX_POINT('',#33265); +#33265 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#33266 = LINE('',#33267,#33268); +#33267 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#33268 = VECTOR('',#33269,1.); +#33269 = DIRECTION('',(0.,0.,-1.)); +#33270 = ORIENTED_EDGE('',*,*,#33271,.T.); +#33271 = EDGE_CURVE('',#33264,#33272,#33274,.T.); +#33272 = VERTEX_POINT('',#33273); +#33273 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#33274 = LINE('',#33275,#33276); +#33275 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#33276 = VECTOR('',#33277,1.); +#33277 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33278 = ORIENTED_EDGE('',*,*,#33279,.T.); +#33279 = EDGE_CURVE('',#33272,#33280,#33282,.T.); +#33280 = VERTEX_POINT('',#33281); +#33281 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33282 = LINE('',#33283,#33284); +#33283 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#33284 = VECTOR('',#33285,1.); +#33285 = DIRECTION('',(0.,0.,1.)); +#33286 = ORIENTED_EDGE('',*,*,#33287,.T.); +#33287 = EDGE_CURVE('',#33280,#28422,#33288,.T.); +#33288 = LINE('',#33289,#33290); +#33289 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33290 = VECTOR('',#33291,1.); +#33291 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33292 = ORIENTED_EDGE('',*,*,#28429,.F.); +#33293 = ORIENTED_EDGE('',*,*,#33238,.T.); +#33294 = PLANE('',#33295); +#33295 = AXIS2_PLACEMENT_3D('',#33296,#33297,#33298); +#33296 = CARTESIAN_POINT('',(-0.1,-27.94,3.911477598424)); +#33297 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33298 = DIRECTION('',(0.,0.,1.)); +#33299 = ADVANCED_FACE('',(#33300),#33318,.T.); +#33300 = FACE_BOUND('',#33301,.T.); +#33301 = EDGE_LOOP('',(#33302,#33310,#33316,#33317)); +#33302 = ORIENTED_EDGE('',*,*,#33303,.T.); +#33303 = EDGE_CURVE('',#33280,#33304,#33306,.T.); +#33304 = VERTEX_POINT('',#33305); +#33305 = CARTESIAN_POINT('',(0.1,-27.69,7.35)); +#33306 = LINE('',#33307,#33308); +#33307 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33308 = VECTOR('',#33309,1.); +#33309 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33310 = ORIENTED_EDGE('',*,*,#33311,.T.); +#33311 = EDGE_CURVE('',#33304,#28414,#33312,.T.); +#33312 = LINE('',#33313,#33314); +#33313 = CARTESIAN_POINT('',(0.1,-27.69,7.35)); +#33314 = VECTOR('',#33315,1.); +#33315 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33316 = ORIENTED_EDGE('',*,*,#28421,.F.); +#33317 = ORIENTED_EDGE('',*,*,#33287,.F.); +#33318 = PLANE('',#33319); +#33319 = AXIS2_PLACEMENT_3D('',#33320,#33321,#33322); +#33320 = CARTESIAN_POINT('',(-0.1,-27.69,7.35)); +#33321 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33322 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33323 = ADVANCED_FACE('',(#33324),#33360,.F.); +#33324 = FACE_BOUND('',#33325,.F.); +#33325 = EDGE_LOOP('',(#33326,#33327,#33335,#33343,#33351,#33357,#33358, + #33359)); +#33326 = ORIENTED_EDGE('',*,*,#28509,.F.); +#33327 = ORIENTED_EDGE('',*,*,#33328,.T.); +#33328 = EDGE_CURVE('',#28502,#33329,#33331,.T.); +#33329 = VERTEX_POINT('',#33330); +#33330 = CARTESIAN_POINT('',(0.1,-28.19,7.35)); +#33331 = LINE('',#33332,#33333); +#33332 = CARTESIAN_POINT('',(0.1,-28.24,7.4)); +#33333 = VECTOR('',#33334,1.); +#33334 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33335 = ORIENTED_EDGE('',*,*,#33336,.T.); +#33336 = EDGE_CURVE('',#33329,#33337,#33339,.T.); +#33337 = VERTEX_POINT('',#33338); +#33338 = CARTESIAN_POINT('',(0.1,-28.19,1.25)); +#33339 = LINE('',#33340,#33341); +#33340 = CARTESIAN_POINT('',(0.1,-28.19,7.35)); +#33341 = VECTOR('',#33342,1.); +#33342 = DIRECTION('',(0.,0.,-1.)); +#33343 = ORIENTED_EDGE('',*,*,#33344,.T.); +#33344 = EDGE_CURVE('',#33337,#33345,#33347,.T.); +#33345 = VERTEX_POINT('',#33346); +#33346 = CARTESIAN_POINT('',(0.1,-27.69,1.25)); +#33347 = LINE('',#33348,#33349); +#33348 = CARTESIAN_POINT('',(0.1,-28.19,1.25)); +#33349 = VECTOR('',#33350,1.); +#33350 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33351 = ORIENTED_EDGE('',*,*,#33352,.T.); +#33352 = EDGE_CURVE('',#33345,#33304,#33353,.T.); +#33353 = LINE('',#33354,#33355); +#33354 = CARTESIAN_POINT('',(0.1,-27.69,1.25)); +#33355 = VECTOR('',#33356,1.); +#33356 = DIRECTION('',(0.,0.,1.)); +#33357 = ORIENTED_EDGE('',*,*,#33311,.T.); +#33358 = ORIENTED_EDGE('',*,*,#28413,.F.); +#33359 = ORIENTED_EDGE('',*,*,#33223,.T.); +#33360 = PLANE('',#33361); +#33361 = AXIS2_PLACEMENT_3D('',#33362,#33363,#33364); +#33362 = CARTESIAN_POINT('',(0.1,-27.94,3.911477598424)); +#33363 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33364 = DIRECTION('',(0.,0.,1.)); +#33365 = ADVANCED_FACE('',(#33366),#33377,.T.); +#33366 = FACE_BOUND('',#33367,.T.); +#33367 = EDGE_LOOP('',(#33368,#33369,#33370,#33376)); +#33368 = ORIENTED_EDGE('',*,*,#28501,.T.); +#33369 = ORIENTED_EDGE('',*,*,#33328,.T.); +#33370 = ORIENTED_EDGE('',*,*,#33371,.F.); +#33371 = EDGE_CURVE('',#33256,#33329,#33372,.T.); +#33372 = LINE('',#33373,#33374); +#33373 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#33374 = VECTOR('',#33375,1.); +#33375 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33376 = ORIENTED_EDGE('',*,*,#33255,.F.); +#33377 = PLANE('',#33378); +#33378 = AXIS2_PLACEMENT_3D('',#33379,#33380,#33381); +#33379 = CARTESIAN_POINT('',(-0.1,-28.24,7.4)); +#33380 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33381 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33382 = ADVANCED_FACE('',(#33383),#33394,.T.); +#33383 = FACE_BOUND('',#33384,.T.); +#33384 = EDGE_LOOP('',(#33385,#33386,#33387,#33388)); +#33385 = ORIENTED_EDGE('',*,*,#28677,.T.); +#33386 = ORIENTED_EDGE('',*,*,#28540,.T.); +#33387 = ORIENTED_EDGE('',*,*,#28565,.T.); +#33388 = ORIENTED_EDGE('',*,*,#33389,.T.); +#33389 = EDGE_CURVE('',#28566,#28670,#33390,.T.); +#33390 = LINE('',#33391,#33392); +#33391 = CARTESIAN_POINT('',(0.1,-25.4,0.9)); +#33392 = VECTOR('',#33393,1.); +#33393 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33394 = PLANE('',#33395); +#33395 = AXIS2_PLACEMENT_3D('',#33396,#33397,#33398); +#33396 = CARTESIAN_POINT('',(-2.913641550251E-15,-25.4,0.9)); +#33397 = DIRECTION('',(0.,0.,1.)); +#33398 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33399 = ADVANCED_FACE('',(#33400),#33411,.T.); +#33400 = FACE_BOUND('',#33401,.T.); +#33401 = EDGE_LOOP('',(#33402,#33403,#33409,#33410)); +#33402 = ORIENTED_EDGE('',*,*,#28645,.T.); +#33403 = ORIENTED_EDGE('',*,*,#33404,.F.); +#33404 = EDGE_CURVE('',#28590,#28646,#33405,.T.); +#33405 = LINE('',#33406,#33407); +#33406 = CARTESIAN_POINT('',(-0.1,-25.4,0.9)); +#33407 = VECTOR('',#33408,1.); +#33408 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33409 = ORIENTED_EDGE('',*,*,#28597,.T.); +#33410 = ORIENTED_EDGE('',*,*,#28620,.T.); +#33411 = PLANE('',#33412); +#33412 = AXIS2_PLACEMENT_3D('',#33413,#33414,#33415); +#33413 = CARTESIAN_POINT('',(-2.913641550251E-15,-25.4,0.9)); +#33414 = DIRECTION('',(0.,0.,1.)); +#33415 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33416 = ADVANCED_FACE('',(#33417),#33460,.T.); +#33417 = FACE_BOUND('',#33418,.T.); +#33418 = EDGE_LOOP('',(#33419,#33420,#33428,#33436,#33444,#33452,#33458, + #33459)); +#33419 = ORIENTED_EDGE('',*,*,#28653,.F.); +#33420 = ORIENTED_EDGE('',*,*,#33421,.T.); +#33421 = EDGE_CURVE('',#28654,#33422,#33424,.T.); +#33422 = VERTEX_POINT('',#33423); +#33423 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#33424 = LINE('',#33425,#33426); +#33425 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#33426 = VECTOR('',#33427,1.); +#33427 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33428 = ORIENTED_EDGE('',*,*,#33429,.T.); +#33429 = EDGE_CURVE('',#33422,#33430,#33432,.T.); +#33430 = VERTEX_POINT('',#33431); +#33431 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#33432 = LINE('',#33433,#33434); +#33433 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#33434 = VECTOR('',#33435,1.); +#33435 = DIRECTION('',(0.,0.,-1.)); +#33436 = ORIENTED_EDGE('',*,*,#33437,.T.); +#33437 = EDGE_CURVE('',#33430,#33438,#33440,.T.); +#33438 = VERTEX_POINT('',#33439); +#33439 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#33440 = LINE('',#33441,#33442); +#33441 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#33442 = VECTOR('',#33443,1.); +#33443 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33444 = ORIENTED_EDGE('',*,*,#33445,.T.); +#33445 = EDGE_CURVE('',#33438,#33446,#33448,.T.); +#33446 = VERTEX_POINT('',#33447); +#33447 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33448 = LINE('',#33449,#33450); +#33449 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#33450 = VECTOR('',#33451,1.); +#33451 = DIRECTION('',(0.,0.,1.)); +#33452 = ORIENTED_EDGE('',*,*,#33453,.T.); +#33453 = EDGE_CURVE('',#33446,#28582,#33454,.T.); +#33454 = LINE('',#33455,#33456); +#33455 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33456 = VECTOR('',#33457,1.); +#33457 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33458 = ORIENTED_EDGE('',*,*,#28589,.F.); +#33459 = ORIENTED_EDGE('',*,*,#33404,.T.); +#33460 = PLANE('',#33461); +#33461 = AXIS2_PLACEMENT_3D('',#33462,#33463,#33464); +#33462 = CARTESIAN_POINT('',(-0.1,-25.4,3.911477598424)); +#33463 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33464 = DIRECTION('',(0.,0.,1.)); +#33465 = ADVANCED_FACE('',(#33466),#33484,.T.); +#33466 = FACE_BOUND('',#33467,.T.); +#33467 = EDGE_LOOP('',(#33468,#33476,#33482,#33483)); +#33468 = ORIENTED_EDGE('',*,*,#33469,.T.); +#33469 = EDGE_CURVE('',#33446,#33470,#33472,.T.); +#33470 = VERTEX_POINT('',#33471); +#33471 = CARTESIAN_POINT('',(0.1,-25.15,7.35)); +#33472 = LINE('',#33473,#33474); +#33473 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33474 = VECTOR('',#33475,1.); +#33475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33476 = ORIENTED_EDGE('',*,*,#33477,.T.); +#33477 = EDGE_CURVE('',#33470,#28574,#33478,.T.); +#33478 = LINE('',#33479,#33480); +#33479 = CARTESIAN_POINT('',(0.1,-25.15,7.35)); +#33480 = VECTOR('',#33481,1.); +#33481 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33482 = ORIENTED_EDGE('',*,*,#28581,.F.); +#33483 = ORIENTED_EDGE('',*,*,#33453,.F.); +#33484 = PLANE('',#33485); +#33485 = AXIS2_PLACEMENT_3D('',#33486,#33487,#33488); +#33486 = CARTESIAN_POINT('',(-0.1,-25.15,7.35)); +#33487 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33488 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33489 = ADVANCED_FACE('',(#33490),#33526,.F.); +#33490 = FACE_BOUND('',#33491,.F.); +#33491 = EDGE_LOOP('',(#33492,#33493,#33501,#33509,#33517,#33523,#33524, + #33525)); +#33492 = ORIENTED_EDGE('',*,*,#28669,.F.); +#33493 = ORIENTED_EDGE('',*,*,#33494,.T.); +#33494 = EDGE_CURVE('',#28662,#33495,#33497,.T.); +#33495 = VERTEX_POINT('',#33496); +#33496 = CARTESIAN_POINT('',(0.1,-25.65,7.35)); +#33497 = LINE('',#33498,#33499); +#33498 = CARTESIAN_POINT('',(0.1,-25.7,7.4)); +#33499 = VECTOR('',#33500,1.); +#33500 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33501 = ORIENTED_EDGE('',*,*,#33502,.T.); +#33502 = EDGE_CURVE('',#33495,#33503,#33505,.T.); +#33503 = VERTEX_POINT('',#33504); +#33504 = CARTESIAN_POINT('',(0.1,-25.65,1.25)); +#33505 = LINE('',#33506,#33507); +#33506 = CARTESIAN_POINT('',(0.1,-25.65,7.35)); +#33507 = VECTOR('',#33508,1.); +#33508 = DIRECTION('',(0.,0.,-1.)); +#33509 = ORIENTED_EDGE('',*,*,#33510,.T.); +#33510 = EDGE_CURVE('',#33503,#33511,#33513,.T.); +#33511 = VERTEX_POINT('',#33512); +#33512 = CARTESIAN_POINT('',(0.1,-25.15,1.25)); +#33513 = LINE('',#33514,#33515); +#33514 = CARTESIAN_POINT('',(0.1,-25.65,1.25)); +#33515 = VECTOR('',#33516,1.); +#33516 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33517 = ORIENTED_EDGE('',*,*,#33518,.T.); +#33518 = EDGE_CURVE('',#33511,#33470,#33519,.T.); +#33519 = LINE('',#33520,#33521); +#33520 = CARTESIAN_POINT('',(0.1,-25.15,1.25)); +#33521 = VECTOR('',#33522,1.); +#33522 = DIRECTION('',(0.,0.,1.)); +#33523 = ORIENTED_EDGE('',*,*,#33477,.T.); +#33524 = ORIENTED_EDGE('',*,*,#28573,.F.); +#33525 = ORIENTED_EDGE('',*,*,#33389,.T.); +#33526 = PLANE('',#33527); +#33527 = AXIS2_PLACEMENT_3D('',#33528,#33529,#33530); +#33528 = CARTESIAN_POINT('',(0.1,-25.4,3.911477598424)); +#33529 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33530 = DIRECTION('',(0.,0.,1.)); +#33531 = ADVANCED_FACE('',(#33532),#33543,.T.); +#33532 = FACE_BOUND('',#33533,.T.); +#33533 = EDGE_LOOP('',(#33534,#33535,#33536,#33542)); +#33534 = ORIENTED_EDGE('',*,*,#28661,.T.); +#33535 = ORIENTED_EDGE('',*,*,#33494,.T.); +#33536 = ORIENTED_EDGE('',*,*,#33537,.F.); +#33537 = EDGE_CURVE('',#33422,#33495,#33538,.T.); +#33538 = LINE('',#33539,#33540); +#33539 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#33540 = VECTOR('',#33541,1.); +#33541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33542 = ORIENTED_EDGE('',*,*,#33421,.F.); +#33543 = PLANE('',#33544); +#33544 = AXIS2_PLACEMENT_3D('',#33545,#33546,#33547); +#33545 = CARTESIAN_POINT('',(-0.1,-25.7,7.4)); +#33546 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33547 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33548 = ADVANCED_FACE('',(#33549),#33560,.T.); +#33549 = FACE_BOUND('',#33550,.T.); +#33550 = EDGE_LOOP('',(#33551,#33552,#33553,#33554)); +#33551 = ORIENTED_EDGE('',*,*,#28837,.T.); +#33552 = ORIENTED_EDGE('',*,*,#28700,.T.); +#33553 = ORIENTED_EDGE('',*,*,#28725,.T.); +#33554 = ORIENTED_EDGE('',*,*,#33555,.T.); +#33555 = EDGE_CURVE('',#28726,#28830,#33556,.T.); +#33556 = LINE('',#33557,#33558); +#33557 = CARTESIAN_POINT('',(0.1,-22.86,0.9)); +#33558 = VECTOR('',#33559,1.); +#33559 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33560 = PLANE('',#33561); +#33561 = AXIS2_PLACEMENT_3D('',#33562,#33563,#33564); +#33562 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#33563 = DIRECTION('',(0.,0.,1.)); +#33564 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33565 = ADVANCED_FACE('',(#33566),#33577,.T.); +#33566 = FACE_BOUND('',#33567,.T.); +#33567 = EDGE_LOOP('',(#33568,#33569,#33575,#33576)); +#33568 = ORIENTED_EDGE('',*,*,#28805,.T.); +#33569 = ORIENTED_EDGE('',*,*,#33570,.F.); +#33570 = EDGE_CURVE('',#28750,#28806,#33571,.T.); +#33571 = LINE('',#33572,#33573); +#33572 = CARTESIAN_POINT('',(-0.1,-22.86,0.9)); +#33573 = VECTOR('',#33574,1.); +#33574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33575 = ORIENTED_EDGE('',*,*,#28757,.T.); +#33576 = ORIENTED_EDGE('',*,*,#28780,.T.); +#33577 = PLANE('',#33578); +#33578 = AXIS2_PLACEMENT_3D('',#33579,#33580,#33581); +#33579 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#33580 = DIRECTION('',(0.,0.,1.)); +#33581 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33582 = ADVANCED_FACE('',(#33583),#33626,.T.); +#33583 = FACE_BOUND('',#33584,.T.); +#33584 = EDGE_LOOP('',(#33585,#33586,#33594,#33602,#33610,#33618,#33624, + #33625)); +#33585 = ORIENTED_EDGE('',*,*,#28813,.F.); +#33586 = ORIENTED_EDGE('',*,*,#33587,.T.); +#33587 = EDGE_CURVE('',#28814,#33588,#33590,.T.); +#33588 = VERTEX_POINT('',#33589); +#33589 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#33590 = LINE('',#33591,#33592); +#33591 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#33592 = VECTOR('',#33593,1.); +#33593 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33594 = ORIENTED_EDGE('',*,*,#33595,.T.); +#33595 = EDGE_CURVE('',#33588,#33596,#33598,.T.); +#33596 = VERTEX_POINT('',#33597); +#33597 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#33598 = LINE('',#33599,#33600); +#33599 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#33600 = VECTOR('',#33601,1.); +#33601 = DIRECTION('',(0.,0.,-1.)); +#33602 = ORIENTED_EDGE('',*,*,#33603,.T.); +#33603 = EDGE_CURVE('',#33596,#33604,#33606,.T.); +#33604 = VERTEX_POINT('',#33605); +#33605 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#33606 = LINE('',#33607,#33608); +#33607 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#33608 = VECTOR('',#33609,1.); +#33609 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33610 = ORIENTED_EDGE('',*,*,#33611,.T.); +#33611 = EDGE_CURVE('',#33604,#33612,#33614,.T.); +#33612 = VERTEX_POINT('',#33613); +#33613 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33614 = LINE('',#33615,#33616); +#33615 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#33616 = VECTOR('',#33617,1.); +#33617 = DIRECTION('',(0.,0.,1.)); +#33618 = ORIENTED_EDGE('',*,*,#33619,.T.); +#33619 = EDGE_CURVE('',#33612,#28742,#33620,.T.); +#33620 = LINE('',#33621,#33622); +#33621 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33622 = VECTOR('',#33623,1.); +#33623 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33624 = ORIENTED_EDGE('',*,*,#28749,.F.); +#33625 = ORIENTED_EDGE('',*,*,#33570,.T.); +#33626 = PLANE('',#33627); +#33627 = AXIS2_PLACEMENT_3D('',#33628,#33629,#33630); +#33628 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#33629 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33630 = DIRECTION('',(0.,0.,1.)); +#33631 = ADVANCED_FACE('',(#33632),#33650,.T.); +#33632 = FACE_BOUND('',#33633,.T.); +#33633 = EDGE_LOOP('',(#33634,#33642,#33648,#33649)); +#33634 = ORIENTED_EDGE('',*,*,#33635,.T.); +#33635 = EDGE_CURVE('',#33612,#33636,#33638,.T.); +#33636 = VERTEX_POINT('',#33637); +#33637 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#33638 = LINE('',#33639,#33640); +#33639 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33640 = VECTOR('',#33641,1.); +#33641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33642 = ORIENTED_EDGE('',*,*,#33643,.T.); +#33643 = EDGE_CURVE('',#33636,#28734,#33644,.T.); +#33644 = LINE('',#33645,#33646); +#33645 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#33646 = VECTOR('',#33647,1.); +#33647 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33648 = ORIENTED_EDGE('',*,*,#28741,.F.); +#33649 = ORIENTED_EDGE('',*,*,#33619,.F.); +#33650 = PLANE('',#33651); +#33651 = AXIS2_PLACEMENT_3D('',#33652,#33653,#33654); +#33652 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#33653 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33654 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33655 = ADVANCED_FACE('',(#33656),#33692,.F.); +#33656 = FACE_BOUND('',#33657,.F.); +#33657 = EDGE_LOOP('',(#33658,#33659,#33667,#33675,#33683,#33689,#33690, + #33691)); +#33658 = ORIENTED_EDGE('',*,*,#28829,.F.); +#33659 = ORIENTED_EDGE('',*,*,#33660,.T.); +#33660 = EDGE_CURVE('',#28822,#33661,#33663,.T.); +#33661 = VERTEX_POINT('',#33662); +#33662 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#33663 = LINE('',#33664,#33665); +#33664 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#33665 = VECTOR('',#33666,1.); +#33666 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33667 = ORIENTED_EDGE('',*,*,#33668,.T.); +#33668 = EDGE_CURVE('',#33661,#33669,#33671,.T.); +#33669 = VERTEX_POINT('',#33670); +#33670 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#33671 = LINE('',#33672,#33673); +#33672 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#33673 = VECTOR('',#33674,1.); +#33674 = DIRECTION('',(0.,0.,-1.)); +#33675 = ORIENTED_EDGE('',*,*,#33676,.T.); +#33676 = EDGE_CURVE('',#33669,#33677,#33679,.T.); +#33677 = VERTEX_POINT('',#33678); +#33678 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#33679 = LINE('',#33680,#33681); +#33680 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#33681 = VECTOR('',#33682,1.); +#33682 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33683 = ORIENTED_EDGE('',*,*,#33684,.T.); +#33684 = EDGE_CURVE('',#33677,#33636,#33685,.T.); +#33685 = LINE('',#33686,#33687); +#33686 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#33687 = VECTOR('',#33688,1.); +#33688 = DIRECTION('',(0.,0.,1.)); +#33689 = ORIENTED_EDGE('',*,*,#33643,.T.); +#33690 = ORIENTED_EDGE('',*,*,#28733,.F.); +#33691 = ORIENTED_EDGE('',*,*,#33555,.T.); +#33692 = PLANE('',#33693); +#33693 = AXIS2_PLACEMENT_3D('',#33694,#33695,#33696); +#33694 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#33695 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33696 = DIRECTION('',(0.,0.,1.)); +#33697 = ADVANCED_FACE('',(#33698),#33709,.T.); +#33698 = FACE_BOUND('',#33699,.T.); +#33699 = EDGE_LOOP('',(#33700,#33701,#33702,#33708)); +#33700 = ORIENTED_EDGE('',*,*,#28821,.T.); +#33701 = ORIENTED_EDGE('',*,*,#33660,.T.); +#33702 = ORIENTED_EDGE('',*,*,#33703,.F.); +#33703 = EDGE_CURVE('',#33588,#33661,#33704,.T.); +#33704 = LINE('',#33705,#33706); +#33705 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#33706 = VECTOR('',#33707,1.); +#33707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33708 = ORIENTED_EDGE('',*,*,#33587,.F.); +#33709 = PLANE('',#33710); +#33710 = AXIS2_PLACEMENT_3D('',#33711,#33712,#33713); +#33711 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#33712 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33713 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33714 = ADVANCED_FACE('',(#33715),#33726,.T.); +#33715 = FACE_BOUND('',#33716,.T.); +#33716 = EDGE_LOOP('',(#33717,#33718,#33719,#33720)); +#33717 = ORIENTED_EDGE('',*,*,#28997,.T.); +#33718 = ORIENTED_EDGE('',*,*,#28860,.T.); +#33719 = ORIENTED_EDGE('',*,*,#28885,.T.); +#33720 = ORIENTED_EDGE('',*,*,#33721,.T.); +#33721 = EDGE_CURVE('',#28886,#28990,#33722,.T.); +#33722 = LINE('',#33723,#33724); +#33723 = CARTESIAN_POINT('',(0.1,-20.32,0.9)); +#33724 = VECTOR('',#33725,1.); +#33725 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33726 = PLANE('',#33727); +#33727 = AXIS2_PLACEMENT_3D('',#33728,#33729,#33730); +#33728 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#33729 = DIRECTION('',(0.,0.,1.)); +#33730 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33731 = ADVANCED_FACE('',(#33732),#33743,.T.); +#33732 = FACE_BOUND('',#33733,.T.); +#33733 = EDGE_LOOP('',(#33734,#33735,#33741,#33742)); +#33734 = ORIENTED_EDGE('',*,*,#28965,.T.); +#33735 = ORIENTED_EDGE('',*,*,#33736,.F.); +#33736 = EDGE_CURVE('',#28910,#28966,#33737,.T.); +#33737 = LINE('',#33738,#33739); +#33738 = CARTESIAN_POINT('',(-0.1,-20.32,0.9)); +#33739 = VECTOR('',#33740,1.); +#33740 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33741 = ORIENTED_EDGE('',*,*,#28917,.T.); +#33742 = ORIENTED_EDGE('',*,*,#28940,.T.); +#33743 = PLANE('',#33744); +#33744 = AXIS2_PLACEMENT_3D('',#33745,#33746,#33747); +#33745 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#33746 = DIRECTION('',(0.,0.,1.)); +#33747 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33748 = ADVANCED_FACE('',(#33749),#33792,.T.); +#33749 = FACE_BOUND('',#33750,.T.); +#33750 = EDGE_LOOP('',(#33751,#33752,#33760,#33768,#33776,#33784,#33790, + #33791)); +#33751 = ORIENTED_EDGE('',*,*,#28973,.F.); +#33752 = ORIENTED_EDGE('',*,*,#33753,.T.); +#33753 = EDGE_CURVE('',#28974,#33754,#33756,.T.); +#33754 = VERTEX_POINT('',#33755); +#33755 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#33756 = LINE('',#33757,#33758); +#33757 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#33758 = VECTOR('',#33759,1.); +#33759 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33760 = ORIENTED_EDGE('',*,*,#33761,.T.); +#33761 = EDGE_CURVE('',#33754,#33762,#33764,.T.); +#33762 = VERTEX_POINT('',#33763); +#33763 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#33764 = LINE('',#33765,#33766); +#33765 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#33766 = VECTOR('',#33767,1.); +#33767 = DIRECTION('',(0.,0.,-1.)); +#33768 = ORIENTED_EDGE('',*,*,#33769,.T.); +#33769 = EDGE_CURVE('',#33762,#33770,#33772,.T.); +#33770 = VERTEX_POINT('',#33771); +#33771 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#33772 = LINE('',#33773,#33774); +#33773 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#33774 = VECTOR('',#33775,1.); +#33775 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33776 = ORIENTED_EDGE('',*,*,#33777,.T.); +#33777 = EDGE_CURVE('',#33770,#33778,#33780,.T.); +#33778 = VERTEX_POINT('',#33779); +#33779 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33780 = LINE('',#33781,#33782); +#33781 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#33782 = VECTOR('',#33783,1.); +#33783 = DIRECTION('',(0.,0.,1.)); +#33784 = ORIENTED_EDGE('',*,*,#33785,.T.); +#33785 = EDGE_CURVE('',#33778,#28902,#33786,.T.); +#33786 = LINE('',#33787,#33788); +#33787 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33788 = VECTOR('',#33789,1.); +#33789 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33790 = ORIENTED_EDGE('',*,*,#28909,.F.); +#33791 = ORIENTED_EDGE('',*,*,#33736,.T.); +#33792 = PLANE('',#33793); +#33793 = AXIS2_PLACEMENT_3D('',#33794,#33795,#33796); +#33794 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#33795 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33796 = DIRECTION('',(0.,0.,1.)); +#33797 = ADVANCED_FACE('',(#33798),#33816,.T.); +#33798 = FACE_BOUND('',#33799,.T.); +#33799 = EDGE_LOOP('',(#33800,#33808,#33814,#33815)); +#33800 = ORIENTED_EDGE('',*,*,#33801,.T.); +#33801 = EDGE_CURVE('',#33778,#33802,#33804,.T.); +#33802 = VERTEX_POINT('',#33803); +#33803 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#33804 = LINE('',#33805,#33806); +#33805 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33806 = VECTOR('',#33807,1.); +#33807 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33808 = ORIENTED_EDGE('',*,*,#33809,.T.); +#33809 = EDGE_CURVE('',#33802,#28894,#33810,.T.); +#33810 = LINE('',#33811,#33812); +#33811 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#33812 = VECTOR('',#33813,1.); +#33813 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33814 = ORIENTED_EDGE('',*,*,#28901,.F.); +#33815 = ORIENTED_EDGE('',*,*,#33785,.F.); +#33816 = PLANE('',#33817); +#33817 = AXIS2_PLACEMENT_3D('',#33818,#33819,#33820); +#33818 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#33819 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33820 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33821 = ADVANCED_FACE('',(#33822),#33858,.F.); +#33822 = FACE_BOUND('',#33823,.F.); +#33823 = EDGE_LOOP('',(#33824,#33825,#33833,#33841,#33849,#33855,#33856, + #33857)); +#33824 = ORIENTED_EDGE('',*,*,#28989,.F.); +#33825 = ORIENTED_EDGE('',*,*,#33826,.T.); +#33826 = EDGE_CURVE('',#28982,#33827,#33829,.T.); +#33827 = VERTEX_POINT('',#33828); +#33828 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#33829 = LINE('',#33830,#33831); +#33830 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#33831 = VECTOR('',#33832,1.); +#33832 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33833 = ORIENTED_EDGE('',*,*,#33834,.T.); +#33834 = EDGE_CURVE('',#33827,#33835,#33837,.T.); +#33835 = VERTEX_POINT('',#33836); +#33836 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#33837 = LINE('',#33838,#33839); +#33838 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#33839 = VECTOR('',#33840,1.); +#33840 = DIRECTION('',(0.,0.,-1.)); +#33841 = ORIENTED_EDGE('',*,*,#33842,.T.); +#33842 = EDGE_CURVE('',#33835,#33843,#33845,.T.); +#33843 = VERTEX_POINT('',#33844); +#33844 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#33845 = LINE('',#33846,#33847); +#33846 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#33847 = VECTOR('',#33848,1.); +#33848 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33849 = ORIENTED_EDGE('',*,*,#33850,.T.); +#33850 = EDGE_CURVE('',#33843,#33802,#33851,.T.); +#33851 = LINE('',#33852,#33853); +#33852 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#33853 = VECTOR('',#33854,1.); +#33854 = DIRECTION('',(0.,0.,1.)); +#33855 = ORIENTED_EDGE('',*,*,#33809,.T.); +#33856 = ORIENTED_EDGE('',*,*,#28893,.F.); +#33857 = ORIENTED_EDGE('',*,*,#33721,.T.); +#33858 = PLANE('',#33859); +#33859 = AXIS2_PLACEMENT_3D('',#33860,#33861,#33862); +#33860 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#33861 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33862 = DIRECTION('',(0.,0.,1.)); +#33863 = ADVANCED_FACE('',(#33864),#33875,.T.); +#33864 = FACE_BOUND('',#33865,.T.); +#33865 = EDGE_LOOP('',(#33866,#33867,#33868,#33874)); +#33866 = ORIENTED_EDGE('',*,*,#28981,.T.); +#33867 = ORIENTED_EDGE('',*,*,#33826,.T.); +#33868 = ORIENTED_EDGE('',*,*,#33869,.F.); +#33869 = EDGE_CURVE('',#33754,#33827,#33870,.T.); +#33870 = LINE('',#33871,#33872); +#33871 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#33872 = VECTOR('',#33873,1.); +#33873 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33874 = ORIENTED_EDGE('',*,*,#33753,.F.); +#33875 = PLANE('',#33876); +#33876 = AXIS2_PLACEMENT_3D('',#33877,#33878,#33879); +#33877 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#33878 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33879 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33880 = ADVANCED_FACE('',(#33881),#33892,.T.); +#33881 = FACE_BOUND('',#33882,.T.); +#33882 = EDGE_LOOP('',(#33883,#33884,#33885,#33886)); +#33883 = ORIENTED_EDGE('',*,*,#29157,.T.); +#33884 = ORIENTED_EDGE('',*,*,#29020,.T.); +#33885 = ORIENTED_EDGE('',*,*,#29045,.T.); +#33886 = ORIENTED_EDGE('',*,*,#33887,.T.); +#33887 = EDGE_CURVE('',#29046,#29150,#33888,.T.); +#33888 = LINE('',#33889,#33890); +#33889 = CARTESIAN_POINT('',(0.1,-17.78,0.9)); +#33890 = VECTOR('',#33891,1.); +#33891 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33892 = PLANE('',#33893); +#33893 = AXIS2_PLACEMENT_3D('',#33894,#33895,#33896); +#33894 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#33895 = DIRECTION('',(0.,0.,1.)); +#33896 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33897 = ADVANCED_FACE('',(#33898),#33909,.T.); +#33898 = FACE_BOUND('',#33899,.T.); +#33899 = EDGE_LOOP('',(#33900,#33901,#33907,#33908)); +#33900 = ORIENTED_EDGE('',*,*,#29125,.T.); +#33901 = ORIENTED_EDGE('',*,*,#33902,.F.); +#33902 = EDGE_CURVE('',#29070,#29126,#33903,.T.); +#33903 = LINE('',#33904,#33905); +#33904 = CARTESIAN_POINT('',(-0.1,-17.78,0.9)); +#33905 = VECTOR('',#33906,1.); +#33906 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#33907 = ORIENTED_EDGE('',*,*,#29077,.T.); +#33908 = ORIENTED_EDGE('',*,*,#29100,.T.); +#33909 = PLANE('',#33910); +#33910 = AXIS2_PLACEMENT_3D('',#33911,#33912,#33913); +#33911 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#33912 = DIRECTION('',(0.,0.,1.)); +#33913 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#33914 = ADVANCED_FACE('',(#33915),#33958,.T.); +#33915 = FACE_BOUND('',#33916,.T.); +#33916 = EDGE_LOOP('',(#33917,#33918,#33926,#33934,#33942,#33950,#33956, + #33957)); +#33917 = ORIENTED_EDGE('',*,*,#29133,.F.); +#33918 = ORIENTED_EDGE('',*,*,#33919,.T.); +#33919 = EDGE_CURVE('',#29134,#33920,#33922,.T.); +#33920 = VERTEX_POINT('',#33921); +#33921 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#33922 = LINE('',#33923,#33924); +#33923 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#33924 = VECTOR('',#33925,1.); +#33925 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33926 = ORIENTED_EDGE('',*,*,#33927,.T.); +#33927 = EDGE_CURVE('',#33920,#33928,#33930,.T.); +#33928 = VERTEX_POINT('',#33929); +#33929 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#33930 = LINE('',#33931,#33932); +#33931 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#33932 = VECTOR('',#33933,1.); +#33933 = DIRECTION('',(0.,0.,-1.)); +#33934 = ORIENTED_EDGE('',*,*,#33935,.T.); +#33935 = EDGE_CURVE('',#33928,#33936,#33938,.T.); +#33936 = VERTEX_POINT('',#33937); +#33937 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#33938 = LINE('',#33939,#33940); +#33939 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#33940 = VECTOR('',#33941,1.); +#33941 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#33942 = ORIENTED_EDGE('',*,*,#33943,.T.); +#33943 = EDGE_CURVE('',#33936,#33944,#33946,.T.); +#33944 = VERTEX_POINT('',#33945); +#33945 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33946 = LINE('',#33947,#33948); +#33947 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#33948 = VECTOR('',#33949,1.); +#33949 = DIRECTION('',(0.,0.,1.)); +#33950 = ORIENTED_EDGE('',*,*,#33951,.T.); +#33951 = EDGE_CURVE('',#33944,#29062,#33952,.T.); +#33952 = LINE('',#33953,#33954); +#33953 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33954 = VECTOR('',#33955,1.); +#33955 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33956 = ORIENTED_EDGE('',*,*,#29069,.F.); +#33957 = ORIENTED_EDGE('',*,*,#33902,.T.); +#33958 = PLANE('',#33959); +#33959 = AXIS2_PLACEMENT_3D('',#33960,#33961,#33962); +#33960 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#33961 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#33962 = DIRECTION('',(0.,0.,1.)); +#33963 = ADVANCED_FACE('',(#33964),#33982,.T.); +#33964 = FACE_BOUND('',#33965,.T.); +#33965 = EDGE_LOOP('',(#33966,#33974,#33980,#33981)); +#33966 = ORIENTED_EDGE('',*,*,#33967,.T.); +#33967 = EDGE_CURVE('',#33944,#33968,#33970,.T.); +#33968 = VERTEX_POINT('',#33969); +#33969 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#33970 = LINE('',#33971,#33972); +#33971 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33972 = VECTOR('',#33973,1.); +#33973 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#33974 = ORIENTED_EDGE('',*,*,#33975,.T.); +#33975 = EDGE_CURVE('',#33968,#29054,#33976,.T.); +#33976 = LINE('',#33977,#33978); +#33977 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#33978 = VECTOR('',#33979,1.); +#33979 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33980 = ORIENTED_EDGE('',*,*,#29061,.F.); +#33981 = ORIENTED_EDGE('',*,*,#33951,.F.); +#33982 = PLANE('',#33983); +#33983 = AXIS2_PLACEMENT_3D('',#33984,#33985,#33986); +#33984 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#33985 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#33986 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#33987 = ADVANCED_FACE('',(#33988),#34024,.F.); +#33988 = FACE_BOUND('',#33989,.F.); +#33989 = EDGE_LOOP('',(#33990,#33991,#33999,#34007,#34015,#34021,#34022, + #34023)); +#33990 = ORIENTED_EDGE('',*,*,#29149,.F.); +#33991 = ORIENTED_EDGE('',*,*,#33992,.T.); +#33992 = EDGE_CURVE('',#29142,#33993,#33995,.T.); +#33993 = VERTEX_POINT('',#33994); +#33994 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#33995 = LINE('',#33996,#33997); +#33996 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#33997 = VECTOR('',#33998,1.); +#33998 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#33999 = ORIENTED_EDGE('',*,*,#34000,.T.); +#34000 = EDGE_CURVE('',#33993,#34001,#34003,.T.); +#34001 = VERTEX_POINT('',#34002); +#34002 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#34003 = LINE('',#34004,#34005); +#34004 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#34005 = VECTOR('',#34006,1.); +#34006 = DIRECTION('',(0.,0.,-1.)); +#34007 = ORIENTED_EDGE('',*,*,#34008,.T.); +#34008 = EDGE_CURVE('',#34001,#34009,#34011,.T.); +#34009 = VERTEX_POINT('',#34010); +#34010 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#34011 = LINE('',#34012,#34013); +#34012 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#34013 = VECTOR('',#34014,1.); +#34014 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34015 = ORIENTED_EDGE('',*,*,#34016,.T.); +#34016 = EDGE_CURVE('',#34009,#33968,#34017,.T.); +#34017 = LINE('',#34018,#34019); +#34018 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#34019 = VECTOR('',#34020,1.); +#34020 = DIRECTION('',(0.,0.,1.)); +#34021 = ORIENTED_EDGE('',*,*,#33975,.T.); +#34022 = ORIENTED_EDGE('',*,*,#29053,.F.); +#34023 = ORIENTED_EDGE('',*,*,#33887,.T.); +#34024 = PLANE('',#34025); +#34025 = AXIS2_PLACEMENT_3D('',#34026,#34027,#34028); +#34026 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#34027 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34028 = DIRECTION('',(0.,0.,1.)); +#34029 = ADVANCED_FACE('',(#34030),#34041,.T.); +#34030 = FACE_BOUND('',#34031,.T.); +#34031 = EDGE_LOOP('',(#34032,#34033,#34034,#34040)); +#34032 = ORIENTED_EDGE('',*,*,#29141,.T.); +#34033 = ORIENTED_EDGE('',*,*,#33992,.T.); +#34034 = ORIENTED_EDGE('',*,*,#34035,.F.); +#34035 = EDGE_CURVE('',#33920,#33993,#34036,.T.); +#34036 = LINE('',#34037,#34038); +#34037 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#34038 = VECTOR('',#34039,1.); +#34039 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34040 = ORIENTED_EDGE('',*,*,#33919,.F.); +#34041 = PLANE('',#34042); +#34042 = AXIS2_PLACEMENT_3D('',#34043,#34044,#34045); +#34043 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#34044 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34045 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34046 = ADVANCED_FACE('',(#34047),#34058,.T.); +#34047 = FACE_BOUND('',#34048,.T.); +#34048 = EDGE_LOOP('',(#34049,#34050,#34051,#34052)); +#34049 = ORIENTED_EDGE('',*,*,#29317,.T.); +#34050 = ORIENTED_EDGE('',*,*,#29180,.T.); +#34051 = ORIENTED_EDGE('',*,*,#29205,.T.); +#34052 = ORIENTED_EDGE('',*,*,#34053,.T.); +#34053 = EDGE_CURVE('',#29206,#29310,#34054,.T.); +#34054 = LINE('',#34055,#34056); +#34055 = CARTESIAN_POINT('',(0.1,-15.24,0.9)); +#34056 = VECTOR('',#34057,1.); +#34057 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34058 = PLANE('',#34059); +#34059 = AXIS2_PLACEMENT_3D('',#34060,#34061,#34062); +#34060 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#34061 = DIRECTION('',(0.,0.,1.)); +#34062 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34063 = ADVANCED_FACE('',(#34064),#34075,.T.); +#34064 = FACE_BOUND('',#34065,.T.); +#34065 = EDGE_LOOP('',(#34066,#34067,#34073,#34074)); +#34066 = ORIENTED_EDGE('',*,*,#29285,.T.); +#34067 = ORIENTED_EDGE('',*,*,#34068,.F.); +#34068 = EDGE_CURVE('',#29230,#29286,#34069,.T.); +#34069 = LINE('',#34070,#34071); +#34070 = CARTESIAN_POINT('',(-0.1,-15.24,0.9)); +#34071 = VECTOR('',#34072,1.); +#34072 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34073 = ORIENTED_EDGE('',*,*,#29237,.T.); +#34074 = ORIENTED_EDGE('',*,*,#29260,.T.); +#34075 = PLANE('',#34076); +#34076 = AXIS2_PLACEMENT_3D('',#34077,#34078,#34079); +#34077 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#34078 = DIRECTION('',(0.,0.,1.)); +#34079 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34080 = ADVANCED_FACE('',(#34081),#34124,.T.); +#34081 = FACE_BOUND('',#34082,.T.); +#34082 = EDGE_LOOP('',(#34083,#34084,#34092,#34100,#34108,#34116,#34122, + #34123)); +#34083 = ORIENTED_EDGE('',*,*,#29293,.F.); +#34084 = ORIENTED_EDGE('',*,*,#34085,.T.); +#34085 = EDGE_CURVE('',#29294,#34086,#34088,.T.); +#34086 = VERTEX_POINT('',#34087); +#34087 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#34088 = LINE('',#34089,#34090); +#34089 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#34090 = VECTOR('',#34091,1.); +#34091 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34092 = ORIENTED_EDGE('',*,*,#34093,.T.); +#34093 = EDGE_CURVE('',#34086,#34094,#34096,.T.); +#34094 = VERTEX_POINT('',#34095); +#34095 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#34096 = LINE('',#34097,#34098); +#34097 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#34098 = VECTOR('',#34099,1.); +#34099 = DIRECTION('',(0.,0.,-1.)); +#34100 = ORIENTED_EDGE('',*,*,#34101,.T.); +#34101 = EDGE_CURVE('',#34094,#34102,#34104,.T.); +#34102 = VERTEX_POINT('',#34103); +#34103 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#34104 = LINE('',#34105,#34106); +#34105 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#34106 = VECTOR('',#34107,1.); +#34107 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34108 = ORIENTED_EDGE('',*,*,#34109,.T.); +#34109 = EDGE_CURVE('',#34102,#34110,#34112,.T.); +#34110 = VERTEX_POINT('',#34111); +#34111 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34112 = LINE('',#34113,#34114); +#34113 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#34114 = VECTOR('',#34115,1.); +#34115 = DIRECTION('',(0.,0.,1.)); +#34116 = ORIENTED_EDGE('',*,*,#34117,.T.); +#34117 = EDGE_CURVE('',#34110,#29222,#34118,.T.); +#34118 = LINE('',#34119,#34120); +#34119 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34120 = VECTOR('',#34121,1.); +#34121 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34122 = ORIENTED_EDGE('',*,*,#29229,.F.); +#34123 = ORIENTED_EDGE('',*,*,#34068,.T.); +#34124 = PLANE('',#34125); +#34125 = AXIS2_PLACEMENT_3D('',#34126,#34127,#34128); +#34126 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#34127 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34128 = DIRECTION('',(0.,0.,1.)); +#34129 = ADVANCED_FACE('',(#34130),#34148,.T.); +#34130 = FACE_BOUND('',#34131,.T.); +#34131 = EDGE_LOOP('',(#34132,#34140,#34146,#34147)); +#34132 = ORIENTED_EDGE('',*,*,#34133,.T.); +#34133 = EDGE_CURVE('',#34110,#34134,#34136,.T.); +#34134 = VERTEX_POINT('',#34135); +#34135 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#34136 = LINE('',#34137,#34138); +#34137 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34138 = VECTOR('',#34139,1.); +#34139 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34140 = ORIENTED_EDGE('',*,*,#34141,.T.); +#34141 = EDGE_CURVE('',#34134,#29214,#34142,.T.); +#34142 = LINE('',#34143,#34144); +#34143 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#34144 = VECTOR('',#34145,1.); +#34145 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34146 = ORIENTED_EDGE('',*,*,#29221,.F.); +#34147 = ORIENTED_EDGE('',*,*,#34117,.F.); +#34148 = PLANE('',#34149); +#34149 = AXIS2_PLACEMENT_3D('',#34150,#34151,#34152); +#34150 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#34151 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34152 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34153 = ADVANCED_FACE('',(#34154),#34190,.F.); +#34154 = FACE_BOUND('',#34155,.F.); +#34155 = EDGE_LOOP('',(#34156,#34157,#34165,#34173,#34181,#34187,#34188, + #34189)); +#34156 = ORIENTED_EDGE('',*,*,#29309,.F.); +#34157 = ORIENTED_EDGE('',*,*,#34158,.T.); +#34158 = EDGE_CURVE('',#29302,#34159,#34161,.T.); +#34159 = VERTEX_POINT('',#34160); +#34160 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#34161 = LINE('',#34162,#34163); +#34162 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#34163 = VECTOR('',#34164,1.); +#34164 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34165 = ORIENTED_EDGE('',*,*,#34166,.T.); +#34166 = EDGE_CURVE('',#34159,#34167,#34169,.T.); +#34167 = VERTEX_POINT('',#34168); +#34168 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#34169 = LINE('',#34170,#34171); +#34170 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#34171 = VECTOR('',#34172,1.); +#34172 = DIRECTION('',(0.,0.,-1.)); +#34173 = ORIENTED_EDGE('',*,*,#34174,.T.); +#34174 = EDGE_CURVE('',#34167,#34175,#34177,.T.); +#34175 = VERTEX_POINT('',#34176); +#34176 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#34177 = LINE('',#34178,#34179); +#34178 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#34179 = VECTOR('',#34180,1.); +#34180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34181 = ORIENTED_EDGE('',*,*,#34182,.T.); +#34182 = EDGE_CURVE('',#34175,#34134,#34183,.T.); +#34183 = LINE('',#34184,#34185); +#34184 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#34185 = VECTOR('',#34186,1.); +#34186 = DIRECTION('',(0.,0.,1.)); +#34187 = ORIENTED_EDGE('',*,*,#34141,.T.); +#34188 = ORIENTED_EDGE('',*,*,#29213,.F.); +#34189 = ORIENTED_EDGE('',*,*,#34053,.T.); +#34190 = PLANE('',#34191); +#34191 = AXIS2_PLACEMENT_3D('',#34192,#34193,#34194); +#34192 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#34193 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34194 = DIRECTION('',(0.,0.,1.)); +#34195 = ADVANCED_FACE('',(#34196),#34207,.T.); +#34196 = FACE_BOUND('',#34197,.T.); +#34197 = EDGE_LOOP('',(#34198,#34199,#34200,#34206)); +#34198 = ORIENTED_EDGE('',*,*,#29301,.T.); +#34199 = ORIENTED_EDGE('',*,*,#34158,.T.); +#34200 = ORIENTED_EDGE('',*,*,#34201,.F.); +#34201 = EDGE_CURVE('',#34086,#34159,#34202,.T.); +#34202 = LINE('',#34203,#34204); +#34203 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#34204 = VECTOR('',#34205,1.); +#34205 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34206 = ORIENTED_EDGE('',*,*,#34085,.F.); +#34207 = PLANE('',#34208); +#34208 = AXIS2_PLACEMENT_3D('',#34209,#34210,#34211); +#34209 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#34210 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34211 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34212 = ADVANCED_FACE('',(#34213),#34224,.T.); +#34213 = FACE_BOUND('',#34214,.T.); +#34214 = EDGE_LOOP('',(#34215,#34216,#34217,#34218)); +#34215 = ORIENTED_EDGE('',*,*,#29477,.T.); +#34216 = ORIENTED_EDGE('',*,*,#29340,.T.); +#34217 = ORIENTED_EDGE('',*,*,#29365,.T.); +#34218 = ORIENTED_EDGE('',*,*,#34219,.T.); +#34219 = EDGE_CURVE('',#29366,#29470,#34220,.T.); +#34220 = LINE('',#34221,#34222); +#34221 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#34222 = VECTOR('',#34223,1.); +#34223 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34224 = PLANE('',#34225); +#34225 = AXIS2_PLACEMENT_3D('',#34226,#34227,#34228); +#34226 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#34227 = DIRECTION('',(0.,0.,1.)); +#34228 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34229 = ADVANCED_FACE('',(#34230),#34241,.T.); +#34230 = FACE_BOUND('',#34231,.T.); +#34231 = EDGE_LOOP('',(#34232,#34233,#34239,#34240)); +#34232 = ORIENTED_EDGE('',*,*,#29445,.T.); +#34233 = ORIENTED_EDGE('',*,*,#34234,.F.); +#34234 = EDGE_CURVE('',#29390,#29446,#34235,.T.); +#34235 = LINE('',#34236,#34237); +#34236 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#34237 = VECTOR('',#34238,1.); +#34238 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34239 = ORIENTED_EDGE('',*,*,#29397,.T.); +#34240 = ORIENTED_EDGE('',*,*,#29420,.T.); +#34241 = PLANE('',#34242); +#34242 = AXIS2_PLACEMENT_3D('',#34243,#34244,#34245); +#34243 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#34244 = DIRECTION('',(0.,0.,1.)); +#34245 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34246 = ADVANCED_FACE('',(#34247),#34290,.T.); +#34247 = FACE_BOUND('',#34248,.T.); +#34248 = EDGE_LOOP('',(#34249,#34250,#34258,#34266,#34274,#34282,#34288, + #34289)); +#34249 = ORIENTED_EDGE('',*,*,#29453,.F.); +#34250 = ORIENTED_EDGE('',*,*,#34251,.T.); +#34251 = EDGE_CURVE('',#29454,#34252,#34254,.T.); +#34252 = VERTEX_POINT('',#34253); +#34253 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#34254 = LINE('',#34255,#34256); +#34255 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#34256 = VECTOR('',#34257,1.); +#34257 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34258 = ORIENTED_EDGE('',*,*,#34259,.T.); +#34259 = EDGE_CURVE('',#34252,#34260,#34262,.T.); +#34260 = VERTEX_POINT('',#34261); +#34261 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#34262 = LINE('',#34263,#34264); +#34263 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#34264 = VECTOR('',#34265,1.); +#34265 = DIRECTION('',(0.,0.,-1.)); +#34266 = ORIENTED_EDGE('',*,*,#34267,.T.); +#34267 = EDGE_CURVE('',#34260,#34268,#34270,.T.); +#34268 = VERTEX_POINT('',#34269); +#34269 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#34270 = LINE('',#34271,#34272); +#34271 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#34272 = VECTOR('',#34273,1.); +#34273 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34274 = ORIENTED_EDGE('',*,*,#34275,.T.); +#34275 = EDGE_CURVE('',#34268,#34276,#34278,.T.); +#34276 = VERTEX_POINT('',#34277); +#34277 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34278 = LINE('',#34279,#34280); +#34279 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#34280 = VECTOR('',#34281,1.); +#34281 = DIRECTION('',(0.,0.,1.)); +#34282 = ORIENTED_EDGE('',*,*,#34283,.T.); +#34283 = EDGE_CURVE('',#34276,#29382,#34284,.T.); +#34284 = LINE('',#34285,#34286); +#34285 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34286 = VECTOR('',#34287,1.); +#34287 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34288 = ORIENTED_EDGE('',*,*,#29389,.F.); +#34289 = ORIENTED_EDGE('',*,*,#34234,.T.); +#34290 = PLANE('',#34291); +#34291 = AXIS2_PLACEMENT_3D('',#34292,#34293,#34294); +#34292 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#34293 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34294 = DIRECTION('',(0.,0.,1.)); +#34295 = ADVANCED_FACE('',(#34296),#34314,.T.); +#34296 = FACE_BOUND('',#34297,.T.); +#34297 = EDGE_LOOP('',(#34298,#34306,#34312,#34313)); +#34298 = ORIENTED_EDGE('',*,*,#34299,.T.); +#34299 = EDGE_CURVE('',#34276,#34300,#34302,.T.); +#34300 = VERTEX_POINT('',#34301); +#34301 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#34302 = LINE('',#34303,#34304); +#34303 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34304 = VECTOR('',#34305,1.); +#34305 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34306 = ORIENTED_EDGE('',*,*,#34307,.T.); +#34307 = EDGE_CURVE('',#34300,#29374,#34308,.T.); +#34308 = LINE('',#34309,#34310); +#34309 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#34310 = VECTOR('',#34311,1.); +#34311 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34312 = ORIENTED_EDGE('',*,*,#29381,.F.); +#34313 = ORIENTED_EDGE('',*,*,#34283,.F.); +#34314 = PLANE('',#34315); +#34315 = AXIS2_PLACEMENT_3D('',#34316,#34317,#34318); +#34316 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#34317 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34318 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34319 = ADVANCED_FACE('',(#34320),#34356,.F.); +#34320 = FACE_BOUND('',#34321,.F.); +#34321 = EDGE_LOOP('',(#34322,#34323,#34331,#34339,#34347,#34353,#34354, + #34355)); +#34322 = ORIENTED_EDGE('',*,*,#29469,.F.); +#34323 = ORIENTED_EDGE('',*,*,#34324,.T.); +#34324 = EDGE_CURVE('',#29462,#34325,#34327,.T.); +#34325 = VERTEX_POINT('',#34326); +#34326 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#34327 = LINE('',#34328,#34329); +#34328 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#34329 = VECTOR('',#34330,1.); +#34330 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34331 = ORIENTED_EDGE('',*,*,#34332,.T.); +#34332 = EDGE_CURVE('',#34325,#34333,#34335,.T.); +#34333 = VERTEX_POINT('',#34334); +#34334 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#34335 = LINE('',#34336,#34337); +#34336 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#34337 = VECTOR('',#34338,1.); +#34338 = DIRECTION('',(0.,0.,-1.)); +#34339 = ORIENTED_EDGE('',*,*,#34340,.T.); +#34340 = EDGE_CURVE('',#34333,#34341,#34343,.T.); +#34341 = VERTEX_POINT('',#34342); +#34342 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#34343 = LINE('',#34344,#34345); +#34344 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#34345 = VECTOR('',#34346,1.); +#34346 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34347 = ORIENTED_EDGE('',*,*,#34348,.T.); +#34348 = EDGE_CURVE('',#34341,#34300,#34349,.T.); +#34349 = LINE('',#34350,#34351); +#34350 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#34351 = VECTOR('',#34352,1.); +#34352 = DIRECTION('',(0.,0.,1.)); +#34353 = ORIENTED_EDGE('',*,*,#34307,.T.); +#34354 = ORIENTED_EDGE('',*,*,#29373,.F.); +#34355 = ORIENTED_EDGE('',*,*,#34219,.T.); +#34356 = PLANE('',#34357); +#34357 = AXIS2_PLACEMENT_3D('',#34358,#34359,#34360); +#34358 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#34359 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34360 = DIRECTION('',(0.,0.,1.)); +#34361 = ADVANCED_FACE('',(#34362),#34373,.T.); +#34362 = FACE_BOUND('',#34363,.T.); +#34363 = EDGE_LOOP('',(#34364,#34365,#34366,#34372)); +#34364 = ORIENTED_EDGE('',*,*,#29461,.T.); +#34365 = ORIENTED_EDGE('',*,*,#34324,.T.); +#34366 = ORIENTED_EDGE('',*,*,#34367,.F.); +#34367 = EDGE_CURVE('',#34252,#34325,#34368,.T.); +#34368 = LINE('',#34369,#34370); +#34369 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#34370 = VECTOR('',#34371,1.); +#34371 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34372 = ORIENTED_EDGE('',*,*,#34251,.F.); +#34373 = PLANE('',#34374); +#34374 = AXIS2_PLACEMENT_3D('',#34375,#34376,#34377); +#34375 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#34376 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34377 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34378 = ADVANCED_FACE('',(#34379),#34390,.T.); +#34379 = FACE_BOUND('',#34380,.T.); +#34380 = EDGE_LOOP('',(#34381,#34382,#34383,#34384)); +#34381 = ORIENTED_EDGE('',*,*,#29637,.T.); +#34382 = ORIENTED_EDGE('',*,*,#29500,.T.); +#34383 = ORIENTED_EDGE('',*,*,#29525,.T.); +#34384 = ORIENTED_EDGE('',*,*,#34385,.T.); +#34385 = EDGE_CURVE('',#29526,#29630,#34386,.T.); +#34386 = LINE('',#34387,#34388); +#34387 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#34388 = VECTOR('',#34389,1.); +#34389 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34390 = PLANE('',#34391); +#34391 = AXIS2_PLACEMENT_3D('',#34392,#34393,#34394); +#34392 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#34393 = DIRECTION('',(0.,0.,1.)); +#34394 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34395 = ADVANCED_FACE('',(#34396),#34407,.T.); +#34396 = FACE_BOUND('',#34397,.T.); +#34397 = EDGE_LOOP('',(#34398,#34399,#34405,#34406)); +#34398 = ORIENTED_EDGE('',*,*,#29605,.T.); +#34399 = ORIENTED_EDGE('',*,*,#34400,.F.); +#34400 = EDGE_CURVE('',#29550,#29606,#34401,.T.); +#34401 = LINE('',#34402,#34403); +#34402 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#34403 = VECTOR('',#34404,1.); +#34404 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34405 = ORIENTED_EDGE('',*,*,#29557,.T.); +#34406 = ORIENTED_EDGE('',*,*,#29580,.T.); +#34407 = PLANE('',#34408); +#34408 = AXIS2_PLACEMENT_3D('',#34409,#34410,#34411); +#34409 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#34410 = DIRECTION('',(0.,0.,1.)); +#34411 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34412 = ADVANCED_FACE('',(#34413),#34456,.T.); +#34413 = FACE_BOUND('',#34414,.T.); +#34414 = EDGE_LOOP('',(#34415,#34416,#34424,#34432,#34440,#34448,#34454, + #34455)); +#34415 = ORIENTED_EDGE('',*,*,#29613,.F.); +#34416 = ORIENTED_EDGE('',*,*,#34417,.T.); +#34417 = EDGE_CURVE('',#29614,#34418,#34420,.T.); +#34418 = VERTEX_POINT('',#34419); +#34419 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#34420 = LINE('',#34421,#34422); +#34421 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#34422 = VECTOR('',#34423,1.); +#34423 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34424 = ORIENTED_EDGE('',*,*,#34425,.T.); +#34425 = EDGE_CURVE('',#34418,#34426,#34428,.T.); +#34426 = VERTEX_POINT('',#34427); +#34427 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#34428 = LINE('',#34429,#34430); +#34429 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#34430 = VECTOR('',#34431,1.); +#34431 = DIRECTION('',(0.,0.,-1.)); +#34432 = ORIENTED_EDGE('',*,*,#34433,.T.); +#34433 = EDGE_CURVE('',#34426,#34434,#34436,.T.); +#34434 = VERTEX_POINT('',#34435); +#34435 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#34436 = LINE('',#34437,#34438); +#34437 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#34438 = VECTOR('',#34439,1.); +#34439 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34440 = ORIENTED_EDGE('',*,*,#34441,.T.); +#34441 = EDGE_CURVE('',#34434,#34442,#34444,.T.); +#34442 = VERTEX_POINT('',#34443); +#34443 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34444 = LINE('',#34445,#34446); +#34445 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#34446 = VECTOR('',#34447,1.); +#34447 = DIRECTION('',(0.,0.,1.)); +#34448 = ORIENTED_EDGE('',*,*,#34449,.T.); +#34449 = EDGE_CURVE('',#34442,#29542,#34450,.T.); +#34450 = LINE('',#34451,#34452); +#34451 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34452 = VECTOR('',#34453,1.); +#34453 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34454 = ORIENTED_EDGE('',*,*,#29549,.F.); +#34455 = ORIENTED_EDGE('',*,*,#34400,.T.); +#34456 = PLANE('',#34457); +#34457 = AXIS2_PLACEMENT_3D('',#34458,#34459,#34460); +#34458 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#34459 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34460 = DIRECTION('',(0.,0.,1.)); +#34461 = ADVANCED_FACE('',(#34462),#34480,.T.); +#34462 = FACE_BOUND('',#34463,.T.); +#34463 = EDGE_LOOP('',(#34464,#34472,#34478,#34479)); +#34464 = ORIENTED_EDGE('',*,*,#34465,.T.); +#34465 = EDGE_CURVE('',#34442,#34466,#34468,.T.); +#34466 = VERTEX_POINT('',#34467); +#34467 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#34468 = LINE('',#34469,#34470); +#34469 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34470 = VECTOR('',#34471,1.); +#34471 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34472 = ORIENTED_EDGE('',*,*,#34473,.T.); +#34473 = EDGE_CURVE('',#34466,#29534,#34474,.T.); +#34474 = LINE('',#34475,#34476); +#34475 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#34476 = VECTOR('',#34477,1.); +#34477 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34478 = ORIENTED_EDGE('',*,*,#29541,.F.); +#34479 = ORIENTED_EDGE('',*,*,#34449,.F.); +#34480 = PLANE('',#34481); +#34481 = AXIS2_PLACEMENT_3D('',#34482,#34483,#34484); +#34482 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#34483 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34484 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34485 = ADVANCED_FACE('',(#34486),#34522,.F.); +#34486 = FACE_BOUND('',#34487,.F.); +#34487 = EDGE_LOOP('',(#34488,#34489,#34497,#34505,#34513,#34519,#34520, + #34521)); +#34488 = ORIENTED_EDGE('',*,*,#29629,.F.); +#34489 = ORIENTED_EDGE('',*,*,#34490,.T.); +#34490 = EDGE_CURVE('',#29622,#34491,#34493,.T.); +#34491 = VERTEX_POINT('',#34492); +#34492 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#34493 = LINE('',#34494,#34495); +#34494 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#34495 = VECTOR('',#34496,1.); +#34496 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34497 = ORIENTED_EDGE('',*,*,#34498,.T.); +#34498 = EDGE_CURVE('',#34491,#34499,#34501,.T.); +#34499 = VERTEX_POINT('',#34500); +#34500 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#34501 = LINE('',#34502,#34503); +#34502 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#34503 = VECTOR('',#34504,1.); +#34504 = DIRECTION('',(0.,0.,-1.)); +#34505 = ORIENTED_EDGE('',*,*,#34506,.T.); +#34506 = EDGE_CURVE('',#34499,#34507,#34509,.T.); +#34507 = VERTEX_POINT('',#34508); +#34508 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#34509 = LINE('',#34510,#34511); +#34510 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#34511 = VECTOR('',#34512,1.); +#34512 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34513 = ORIENTED_EDGE('',*,*,#34514,.T.); +#34514 = EDGE_CURVE('',#34507,#34466,#34515,.T.); +#34515 = LINE('',#34516,#34517); +#34516 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#34517 = VECTOR('',#34518,1.); +#34518 = DIRECTION('',(0.,0.,1.)); +#34519 = ORIENTED_EDGE('',*,*,#34473,.T.); +#34520 = ORIENTED_EDGE('',*,*,#29533,.F.); +#34521 = ORIENTED_EDGE('',*,*,#34385,.T.); +#34522 = PLANE('',#34523); +#34523 = AXIS2_PLACEMENT_3D('',#34524,#34525,#34526); +#34524 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#34525 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34526 = DIRECTION('',(0.,0.,1.)); +#34527 = ADVANCED_FACE('',(#34528),#34539,.T.); +#34528 = FACE_BOUND('',#34529,.T.); +#34529 = EDGE_LOOP('',(#34530,#34531,#34532,#34538)); +#34530 = ORIENTED_EDGE('',*,*,#29621,.T.); +#34531 = ORIENTED_EDGE('',*,*,#34490,.T.); +#34532 = ORIENTED_EDGE('',*,*,#34533,.F.); +#34533 = EDGE_CURVE('',#34418,#34491,#34534,.T.); +#34534 = LINE('',#34535,#34536); +#34535 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#34536 = VECTOR('',#34537,1.); +#34537 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34538 = ORIENTED_EDGE('',*,*,#34417,.F.); +#34539 = PLANE('',#34540); +#34540 = AXIS2_PLACEMENT_3D('',#34541,#34542,#34543); +#34541 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#34542 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34543 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34544 = ADVANCED_FACE('',(#34545),#34556,.T.); +#34545 = FACE_BOUND('',#34546,.T.); +#34546 = EDGE_LOOP('',(#34547,#34548,#34549,#34550)); +#34547 = ORIENTED_EDGE('',*,*,#29797,.T.); +#34548 = ORIENTED_EDGE('',*,*,#29660,.T.); +#34549 = ORIENTED_EDGE('',*,*,#29685,.T.); +#34550 = ORIENTED_EDGE('',*,*,#34551,.T.); +#34551 = EDGE_CURVE('',#29686,#29790,#34552,.T.); +#34552 = LINE('',#34553,#34554); +#34553 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#34554 = VECTOR('',#34555,1.); +#34555 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34556 = PLANE('',#34557); +#34557 = AXIS2_PLACEMENT_3D('',#34558,#34559,#34560); +#34558 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#34559 = DIRECTION('',(0.,0.,1.)); +#34560 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34561 = ADVANCED_FACE('',(#34562),#34573,.T.); +#34562 = FACE_BOUND('',#34563,.T.); +#34563 = EDGE_LOOP('',(#34564,#34565,#34571,#34572)); +#34564 = ORIENTED_EDGE('',*,*,#29765,.T.); +#34565 = ORIENTED_EDGE('',*,*,#34566,.F.); +#34566 = EDGE_CURVE('',#29710,#29766,#34567,.T.); +#34567 = LINE('',#34568,#34569); +#34568 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#34569 = VECTOR('',#34570,1.); +#34570 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34571 = ORIENTED_EDGE('',*,*,#29717,.T.); +#34572 = ORIENTED_EDGE('',*,*,#29740,.T.); +#34573 = PLANE('',#34574); +#34574 = AXIS2_PLACEMENT_3D('',#34575,#34576,#34577); +#34575 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#34576 = DIRECTION('',(0.,0.,1.)); +#34577 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34578 = ADVANCED_FACE('',(#34579),#34622,.T.); +#34579 = FACE_BOUND('',#34580,.T.); +#34580 = EDGE_LOOP('',(#34581,#34582,#34590,#34598,#34606,#34614,#34620, + #34621)); +#34581 = ORIENTED_EDGE('',*,*,#29773,.F.); +#34582 = ORIENTED_EDGE('',*,*,#34583,.T.); +#34583 = EDGE_CURVE('',#29774,#34584,#34586,.T.); +#34584 = VERTEX_POINT('',#34585); +#34585 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#34586 = LINE('',#34587,#34588); +#34587 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#34588 = VECTOR('',#34589,1.); +#34589 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34590 = ORIENTED_EDGE('',*,*,#34591,.T.); +#34591 = EDGE_CURVE('',#34584,#34592,#34594,.T.); +#34592 = VERTEX_POINT('',#34593); +#34593 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#34594 = LINE('',#34595,#34596); +#34595 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#34596 = VECTOR('',#34597,1.); +#34597 = DIRECTION('',(0.,0.,-1.)); +#34598 = ORIENTED_EDGE('',*,*,#34599,.T.); +#34599 = EDGE_CURVE('',#34592,#34600,#34602,.T.); +#34600 = VERTEX_POINT('',#34601); +#34601 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#34602 = LINE('',#34603,#34604); +#34603 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#34604 = VECTOR('',#34605,1.); +#34605 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34606 = ORIENTED_EDGE('',*,*,#34607,.T.); +#34607 = EDGE_CURVE('',#34600,#34608,#34610,.T.); +#34608 = VERTEX_POINT('',#34609); +#34609 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34610 = LINE('',#34611,#34612); +#34611 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#34612 = VECTOR('',#34613,1.); +#34613 = DIRECTION('',(0.,0.,1.)); +#34614 = ORIENTED_EDGE('',*,*,#34615,.T.); +#34615 = EDGE_CURVE('',#34608,#29702,#34616,.T.); +#34616 = LINE('',#34617,#34618); +#34617 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34618 = VECTOR('',#34619,1.); +#34619 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34620 = ORIENTED_EDGE('',*,*,#29709,.F.); +#34621 = ORIENTED_EDGE('',*,*,#34566,.T.); +#34622 = PLANE('',#34623); +#34623 = AXIS2_PLACEMENT_3D('',#34624,#34625,#34626); +#34624 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#34625 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34626 = DIRECTION('',(0.,0.,1.)); +#34627 = ADVANCED_FACE('',(#34628),#34646,.T.); +#34628 = FACE_BOUND('',#34629,.T.); +#34629 = EDGE_LOOP('',(#34630,#34638,#34644,#34645)); +#34630 = ORIENTED_EDGE('',*,*,#34631,.T.); +#34631 = EDGE_CURVE('',#34608,#34632,#34634,.T.); +#34632 = VERTEX_POINT('',#34633); +#34633 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#34634 = LINE('',#34635,#34636); +#34635 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34636 = VECTOR('',#34637,1.); +#34637 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34638 = ORIENTED_EDGE('',*,*,#34639,.T.); +#34639 = EDGE_CURVE('',#34632,#29694,#34640,.T.); +#34640 = LINE('',#34641,#34642); +#34641 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#34642 = VECTOR('',#34643,1.); +#34643 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34644 = ORIENTED_EDGE('',*,*,#29701,.F.); +#34645 = ORIENTED_EDGE('',*,*,#34615,.F.); +#34646 = PLANE('',#34647); +#34647 = AXIS2_PLACEMENT_3D('',#34648,#34649,#34650); +#34648 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#34649 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34650 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34651 = ADVANCED_FACE('',(#34652),#34688,.F.); +#34652 = FACE_BOUND('',#34653,.F.); +#34653 = EDGE_LOOP('',(#34654,#34655,#34663,#34671,#34679,#34685,#34686, + #34687)); +#34654 = ORIENTED_EDGE('',*,*,#29789,.F.); +#34655 = ORIENTED_EDGE('',*,*,#34656,.T.); +#34656 = EDGE_CURVE('',#29782,#34657,#34659,.T.); +#34657 = VERTEX_POINT('',#34658); +#34658 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#34659 = LINE('',#34660,#34661); +#34660 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#34661 = VECTOR('',#34662,1.); +#34662 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34663 = ORIENTED_EDGE('',*,*,#34664,.T.); +#34664 = EDGE_CURVE('',#34657,#34665,#34667,.T.); +#34665 = VERTEX_POINT('',#34666); +#34666 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#34667 = LINE('',#34668,#34669); +#34668 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#34669 = VECTOR('',#34670,1.); +#34670 = DIRECTION('',(0.,0.,-1.)); +#34671 = ORIENTED_EDGE('',*,*,#34672,.T.); +#34672 = EDGE_CURVE('',#34665,#34673,#34675,.T.); +#34673 = VERTEX_POINT('',#34674); +#34674 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#34675 = LINE('',#34676,#34677); +#34676 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#34677 = VECTOR('',#34678,1.); +#34678 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34679 = ORIENTED_EDGE('',*,*,#34680,.T.); +#34680 = EDGE_CURVE('',#34673,#34632,#34681,.T.); +#34681 = LINE('',#34682,#34683); +#34682 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#34683 = VECTOR('',#34684,1.); +#34684 = DIRECTION('',(0.,0.,1.)); +#34685 = ORIENTED_EDGE('',*,*,#34639,.T.); +#34686 = ORIENTED_EDGE('',*,*,#29693,.F.); +#34687 = ORIENTED_EDGE('',*,*,#34551,.T.); +#34688 = PLANE('',#34689); +#34689 = AXIS2_PLACEMENT_3D('',#34690,#34691,#34692); +#34690 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#34691 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34692 = DIRECTION('',(0.,0.,1.)); +#34693 = ADVANCED_FACE('',(#34694),#34705,.T.); +#34694 = FACE_BOUND('',#34695,.T.); +#34695 = EDGE_LOOP('',(#34696,#34697,#34698,#34704)); +#34696 = ORIENTED_EDGE('',*,*,#29781,.T.); +#34697 = ORIENTED_EDGE('',*,*,#34656,.T.); +#34698 = ORIENTED_EDGE('',*,*,#34699,.F.); +#34699 = EDGE_CURVE('',#34584,#34657,#34700,.T.); +#34700 = LINE('',#34701,#34702); +#34701 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#34702 = VECTOR('',#34703,1.); +#34703 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34704 = ORIENTED_EDGE('',*,*,#34583,.F.); +#34705 = PLANE('',#34706); +#34706 = AXIS2_PLACEMENT_3D('',#34707,#34708,#34709); +#34707 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#34708 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34709 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34710 = ADVANCED_FACE('',(#34711),#34722,.T.); +#34711 = FACE_BOUND('',#34712,.T.); +#34712 = EDGE_LOOP('',(#34713,#34714,#34715,#34716)); +#34713 = ORIENTED_EDGE('',*,*,#29957,.T.); +#34714 = ORIENTED_EDGE('',*,*,#29820,.T.); +#34715 = ORIENTED_EDGE('',*,*,#29845,.T.); +#34716 = ORIENTED_EDGE('',*,*,#34717,.T.); +#34717 = EDGE_CURVE('',#29846,#29950,#34718,.T.); +#34718 = LINE('',#34719,#34720); +#34719 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#34720 = VECTOR('',#34721,1.); +#34721 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34722 = PLANE('',#34723); +#34723 = AXIS2_PLACEMENT_3D('',#34724,#34725,#34726); +#34724 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#34725 = DIRECTION('',(0.,0.,1.)); +#34726 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34727 = ADVANCED_FACE('',(#34728),#34739,.T.); +#34728 = FACE_BOUND('',#34729,.T.); +#34729 = EDGE_LOOP('',(#34730,#34731,#34737,#34738)); +#34730 = ORIENTED_EDGE('',*,*,#29925,.T.); +#34731 = ORIENTED_EDGE('',*,*,#34732,.F.); +#34732 = EDGE_CURVE('',#29870,#29926,#34733,.T.); +#34733 = LINE('',#34734,#34735); +#34734 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#34735 = VECTOR('',#34736,1.); +#34736 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34737 = ORIENTED_EDGE('',*,*,#29877,.T.); +#34738 = ORIENTED_EDGE('',*,*,#29900,.T.); +#34739 = PLANE('',#34740); +#34740 = AXIS2_PLACEMENT_3D('',#34741,#34742,#34743); +#34741 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#34742 = DIRECTION('',(0.,0.,1.)); +#34743 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34744 = ADVANCED_FACE('',(#34745),#34788,.T.); +#34745 = FACE_BOUND('',#34746,.T.); +#34746 = EDGE_LOOP('',(#34747,#34748,#34756,#34764,#34772,#34780,#34786, + #34787)); +#34747 = ORIENTED_EDGE('',*,*,#29933,.F.); +#34748 = ORIENTED_EDGE('',*,*,#34749,.T.); +#34749 = EDGE_CURVE('',#29934,#34750,#34752,.T.); +#34750 = VERTEX_POINT('',#34751); +#34751 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#34752 = LINE('',#34753,#34754); +#34753 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#34754 = VECTOR('',#34755,1.); +#34755 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34756 = ORIENTED_EDGE('',*,*,#34757,.T.); +#34757 = EDGE_CURVE('',#34750,#34758,#34760,.T.); +#34758 = VERTEX_POINT('',#34759); +#34759 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#34760 = LINE('',#34761,#34762); +#34761 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#34762 = VECTOR('',#34763,1.); +#34763 = DIRECTION('',(0.,0.,-1.)); +#34764 = ORIENTED_EDGE('',*,*,#34765,.T.); +#34765 = EDGE_CURVE('',#34758,#34766,#34768,.T.); +#34766 = VERTEX_POINT('',#34767); +#34767 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#34768 = LINE('',#34769,#34770); +#34769 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#34770 = VECTOR('',#34771,1.); +#34771 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34772 = ORIENTED_EDGE('',*,*,#34773,.T.); +#34773 = EDGE_CURVE('',#34766,#34774,#34776,.T.); +#34774 = VERTEX_POINT('',#34775); +#34775 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34776 = LINE('',#34777,#34778); +#34777 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#34778 = VECTOR('',#34779,1.); +#34779 = DIRECTION('',(0.,0.,1.)); +#34780 = ORIENTED_EDGE('',*,*,#34781,.T.); +#34781 = EDGE_CURVE('',#34774,#29862,#34782,.T.); +#34782 = LINE('',#34783,#34784); +#34783 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34784 = VECTOR('',#34785,1.); +#34785 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34786 = ORIENTED_EDGE('',*,*,#29869,.F.); +#34787 = ORIENTED_EDGE('',*,*,#34732,.T.); +#34788 = PLANE('',#34789); +#34789 = AXIS2_PLACEMENT_3D('',#34790,#34791,#34792); +#34790 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#34791 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34792 = DIRECTION('',(0.,0.,1.)); +#34793 = ADVANCED_FACE('',(#34794),#34812,.T.); +#34794 = FACE_BOUND('',#34795,.T.); +#34795 = EDGE_LOOP('',(#34796,#34804,#34810,#34811)); +#34796 = ORIENTED_EDGE('',*,*,#34797,.T.); +#34797 = EDGE_CURVE('',#34774,#34798,#34800,.T.); +#34798 = VERTEX_POINT('',#34799); +#34799 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#34800 = LINE('',#34801,#34802); +#34801 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34802 = VECTOR('',#34803,1.); +#34803 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34804 = ORIENTED_EDGE('',*,*,#34805,.T.); +#34805 = EDGE_CURVE('',#34798,#29854,#34806,.T.); +#34806 = LINE('',#34807,#34808); +#34807 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#34808 = VECTOR('',#34809,1.); +#34809 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34810 = ORIENTED_EDGE('',*,*,#29861,.F.); +#34811 = ORIENTED_EDGE('',*,*,#34781,.F.); +#34812 = PLANE('',#34813); +#34813 = AXIS2_PLACEMENT_3D('',#34814,#34815,#34816); +#34814 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#34815 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34816 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34817 = ADVANCED_FACE('',(#34818),#34854,.F.); +#34818 = FACE_BOUND('',#34819,.F.); +#34819 = EDGE_LOOP('',(#34820,#34821,#34829,#34837,#34845,#34851,#34852, + #34853)); +#34820 = ORIENTED_EDGE('',*,*,#29949,.F.); +#34821 = ORIENTED_EDGE('',*,*,#34822,.T.); +#34822 = EDGE_CURVE('',#29942,#34823,#34825,.T.); +#34823 = VERTEX_POINT('',#34824); +#34824 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#34825 = LINE('',#34826,#34827); +#34826 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#34827 = VECTOR('',#34828,1.); +#34828 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34829 = ORIENTED_EDGE('',*,*,#34830,.T.); +#34830 = EDGE_CURVE('',#34823,#34831,#34833,.T.); +#34831 = VERTEX_POINT('',#34832); +#34832 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#34833 = LINE('',#34834,#34835); +#34834 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#34835 = VECTOR('',#34836,1.); +#34836 = DIRECTION('',(0.,0.,-1.)); +#34837 = ORIENTED_EDGE('',*,*,#34838,.T.); +#34838 = EDGE_CURVE('',#34831,#34839,#34841,.T.); +#34839 = VERTEX_POINT('',#34840); +#34840 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#34841 = LINE('',#34842,#34843); +#34842 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#34843 = VECTOR('',#34844,1.); +#34844 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34845 = ORIENTED_EDGE('',*,*,#34846,.T.); +#34846 = EDGE_CURVE('',#34839,#34798,#34847,.T.); +#34847 = LINE('',#34848,#34849); +#34848 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#34849 = VECTOR('',#34850,1.); +#34850 = DIRECTION('',(0.,0.,1.)); +#34851 = ORIENTED_EDGE('',*,*,#34805,.T.); +#34852 = ORIENTED_EDGE('',*,*,#29853,.F.); +#34853 = ORIENTED_EDGE('',*,*,#34717,.T.); +#34854 = PLANE('',#34855); +#34855 = AXIS2_PLACEMENT_3D('',#34856,#34857,#34858); +#34856 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#34857 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34858 = DIRECTION('',(0.,0.,1.)); +#34859 = ADVANCED_FACE('',(#34860),#34871,.T.); +#34860 = FACE_BOUND('',#34861,.T.); +#34861 = EDGE_LOOP('',(#34862,#34863,#34864,#34870)); +#34862 = ORIENTED_EDGE('',*,*,#29941,.T.); +#34863 = ORIENTED_EDGE('',*,*,#34822,.T.); +#34864 = ORIENTED_EDGE('',*,*,#34865,.F.); +#34865 = EDGE_CURVE('',#34750,#34823,#34866,.T.); +#34866 = LINE('',#34867,#34868); +#34867 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#34868 = VECTOR('',#34869,1.); +#34869 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34870 = ORIENTED_EDGE('',*,*,#34749,.F.); +#34871 = PLANE('',#34872); +#34872 = AXIS2_PLACEMENT_3D('',#34873,#34874,#34875); +#34873 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#34874 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34875 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34876 = ADVANCED_FACE('',(#34877),#34888,.T.); +#34877 = FACE_BOUND('',#34878,.T.); +#34878 = EDGE_LOOP('',(#34879,#34880,#34881,#34882)); +#34879 = ORIENTED_EDGE('',*,*,#30117,.T.); +#34880 = ORIENTED_EDGE('',*,*,#29980,.T.); +#34881 = ORIENTED_EDGE('',*,*,#30005,.T.); +#34882 = ORIENTED_EDGE('',*,*,#34883,.T.); +#34883 = EDGE_CURVE('',#30006,#30110,#34884,.T.); +#34884 = LINE('',#34885,#34886); +#34885 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#34886 = VECTOR('',#34887,1.); +#34887 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34888 = PLANE('',#34889); +#34889 = AXIS2_PLACEMENT_3D('',#34890,#34891,#34892); +#34890 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#34891 = DIRECTION('',(0.,0.,1.)); +#34892 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34893 = ADVANCED_FACE('',(#34894),#34905,.T.); +#34894 = FACE_BOUND('',#34895,.T.); +#34895 = EDGE_LOOP('',(#34896,#34897,#34903,#34904)); +#34896 = ORIENTED_EDGE('',*,*,#30085,.T.); +#34897 = ORIENTED_EDGE('',*,*,#34898,.F.); +#34898 = EDGE_CURVE('',#30030,#30086,#34899,.T.); +#34899 = LINE('',#34900,#34901); +#34900 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#34901 = VECTOR('',#34902,1.); +#34902 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#34903 = ORIENTED_EDGE('',*,*,#30037,.T.); +#34904 = ORIENTED_EDGE('',*,*,#30060,.T.); +#34905 = PLANE('',#34906); +#34906 = AXIS2_PLACEMENT_3D('',#34907,#34908,#34909); +#34907 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#34908 = DIRECTION('',(0.,0.,1.)); +#34909 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#34910 = ADVANCED_FACE('',(#34911),#34954,.T.); +#34911 = FACE_BOUND('',#34912,.T.); +#34912 = EDGE_LOOP('',(#34913,#34914,#34922,#34930,#34938,#34946,#34952, + #34953)); +#34913 = ORIENTED_EDGE('',*,*,#30093,.F.); +#34914 = ORIENTED_EDGE('',*,*,#34915,.T.); +#34915 = EDGE_CURVE('',#30094,#34916,#34918,.T.); +#34916 = VERTEX_POINT('',#34917); +#34917 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#34918 = LINE('',#34919,#34920); +#34919 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#34920 = VECTOR('',#34921,1.); +#34921 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34922 = ORIENTED_EDGE('',*,*,#34923,.T.); +#34923 = EDGE_CURVE('',#34916,#34924,#34926,.T.); +#34924 = VERTEX_POINT('',#34925); +#34925 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#34926 = LINE('',#34927,#34928); +#34927 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#34928 = VECTOR('',#34929,1.); +#34929 = DIRECTION('',(0.,0.,-1.)); +#34930 = ORIENTED_EDGE('',*,*,#34931,.T.); +#34931 = EDGE_CURVE('',#34924,#34932,#34934,.T.); +#34932 = VERTEX_POINT('',#34933); +#34933 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#34934 = LINE('',#34935,#34936); +#34935 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#34936 = VECTOR('',#34937,1.); +#34937 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#34938 = ORIENTED_EDGE('',*,*,#34939,.T.); +#34939 = EDGE_CURVE('',#34932,#34940,#34942,.T.); +#34940 = VERTEX_POINT('',#34941); +#34941 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34942 = LINE('',#34943,#34944); +#34943 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#34944 = VECTOR('',#34945,1.); +#34945 = DIRECTION('',(0.,0.,1.)); +#34946 = ORIENTED_EDGE('',*,*,#34947,.T.); +#34947 = EDGE_CURVE('',#34940,#30022,#34948,.T.); +#34948 = LINE('',#34949,#34950); +#34949 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34950 = VECTOR('',#34951,1.); +#34951 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34952 = ORIENTED_EDGE('',*,*,#30029,.F.); +#34953 = ORIENTED_EDGE('',*,*,#34898,.T.); +#34954 = PLANE('',#34955); +#34955 = AXIS2_PLACEMENT_3D('',#34956,#34957,#34958); +#34956 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#34957 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#34958 = DIRECTION('',(0.,0.,1.)); +#34959 = ADVANCED_FACE('',(#34960),#34978,.T.); +#34960 = FACE_BOUND('',#34961,.T.); +#34961 = EDGE_LOOP('',(#34962,#34970,#34976,#34977)); +#34962 = ORIENTED_EDGE('',*,*,#34963,.T.); +#34963 = EDGE_CURVE('',#34940,#34964,#34966,.T.); +#34964 = VERTEX_POINT('',#34965); +#34965 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#34966 = LINE('',#34967,#34968); +#34967 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34968 = VECTOR('',#34969,1.); +#34969 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#34970 = ORIENTED_EDGE('',*,*,#34971,.T.); +#34971 = EDGE_CURVE('',#34964,#30014,#34972,.T.); +#34972 = LINE('',#34973,#34974); +#34973 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#34974 = VECTOR('',#34975,1.); +#34975 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34976 = ORIENTED_EDGE('',*,*,#30021,.F.); +#34977 = ORIENTED_EDGE('',*,*,#34947,.F.); +#34978 = PLANE('',#34979); +#34979 = AXIS2_PLACEMENT_3D('',#34980,#34981,#34982); +#34980 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#34981 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#34982 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#34983 = ADVANCED_FACE('',(#34984),#35020,.F.); +#34984 = FACE_BOUND('',#34985,.F.); +#34985 = EDGE_LOOP('',(#34986,#34987,#34995,#35003,#35011,#35017,#35018, + #35019)); +#34986 = ORIENTED_EDGE('',*,*,#30109,.F.); +#34987 = ORIENTED_EDGE('',*,*,#34988,.T.); +#34988 = EDGE_CURVE('',#30102,#34989,#34991,.T.); +#34989 = VERTEX_POINT('',#34990); +#34990 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#34991 = LINE('',#34992,#34993); +#34992 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#34993 = VECTOR('',#34994,1.); +#34994 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#34995 = ORIENTED_EDGE('',*,*,#34996,.T.); +#34996 = EDGE_CURVE('',#34989,#34997,#34999,.T.); +#34997 = VERTEX_POINT('',#34998); +#34998 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#34999 = LINE('',#35000,#35001); +#35000 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#35001 = VECTOR('',#35002,1.); +#35002 = DIRECTION('',(0.,0.,-1.)); +#35003 = ORIENTED_EDGE('',*,*,#35004,.T.); +#35004 = EDGE_CURVE('',#34997,#35005,#35007,.T.); +#35005 = VERTEX_POINT('',#35006); +#35006 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#35007 = LINE('',#35008,#35009); +#35008 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#35009 = VECTOR('',#35010,1.); +#35010 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35011 = ORIENTED_EDGE('',*,*,#35012,.T.); +#35012 = EDGE_CURVE('',#35005,#34964,#35013,.T.); +#35013 = LINE('',#35014,#35015); +#35014 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#35015 = VECTOR('',#35016,1.); +#35016 = DIRECTION('',(0.,0.,1.)); +#35017 = ORIENTED_EDGE('',*,*,#34971,.T.); +#35018 = ORIENTED_EDGE('',*,*,#30013,.F.); +#35019 = ORIENTED_EDGE('',*,*,#34883,.T.); +#35020 = PLANE('',#35021); +#35021 = AXIS2_PLACEMENT_3D('',#35022,#35023,#35024); +#35022 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#35023 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#35024 = DIRECTION('',(0.,0.,1.)); +#35025 = ADVANCED_FACE('',(#35026),#35037,.T.); +#35026 = FACE_BOUND('',#35027,.T.); +#35027 = EDGE_LOOP('',(#35028,#35029,#35030,#35036)); +#35028 = ORIENTED_EDGE('',*,*,#30101,.T.); +#35029 = ORIENTED_EDGE('',*,*,#34988,.T.); +#35030 = ORIENTED_EDGE('',*,*,#35031,.F.); +#35031 = EDGE_CURVE('',#34916,#34989,#35032,.T.); +#35032 = LINE('',#35033,#35034); +#35033 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#35034 = VECTOR('',#35035,1.); +#35035 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35036 = ORIENTED_EDGE('',*,*,#34915,.F.); +#35037 = PLANE('',#35038); +#35038 = AXIS2_PLACEMENT_3D('',#35039,#35040,#35041); +#35039 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#35040 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35041 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35042 = ADVANCED_FACE('',(#35043),#35054,.T.); +#35043 = FACE_BOUND('',#35044,.T.); +#35044 = EDGE_LOOP('',(#35045,#35046,#35047,#35048)); +#35045 = ORIENTED_EDGE('',*,*,#30277,.T.); +#35046 = ORIENTED_EDGE('',*,*,#30140,.T.); +#35047 = ORIENTED_EDGE('',*,*,#30165,.T.); +#35048 = ORIENTED_EDGE('',*,*,#35049,.T.); +#35049 = EDGE_CURVE('',#30166,#30270,#35050,.T.); +#35050 = LINE('',#35051,#35052); +#35051 = CARTESIAN_POINT('',(0.1,3.541611448554E-15,0.9)); +#35052 = VECTOR('',#35053,1.); +#35053 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35054 = PLANE('',#35055); +#35055 = AXIS2_PLACEMENT_3D('',#35056,#35057,#35058); +#35056 = CARTESIAN_POINT('',(-9.367506770275E-17,7.105427357601E-15,0.9) + ); +#35057 = DIRECTION('',(0.,0.,1.)); +#35058 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35059 = ADVANCED_FACE('',(#35060),#35071,.T.); +#35060 = FACE_BOUND('',#35061,.T.); +#35061 = EDGE_LOOP('',(#35062,#35063,#35069,#35070)); +#35062 = ORIENTED_EDGE('',*,*,#30245,.T.); +#35063 = ORIENTED_EDGE('',*,*,#35064,.F.); +#35064 = EDGE_CURVE('',#30190,#30246,#35065,.T.); +#35065 = LINE('',#35066,#35067); +#35066 = CARTESIAN_POINT('',(-0.1,3.563815909047E-15,0.9)); +#35067 = VECTOR('',#35068,1.); +#35068 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35069 = ORIENTED_EDGE('',*,*,#30197,.T.); +#35070 = ORIENTED_EDGE('',*,*,#30220,.T.); +#35071 = PLANE('',#35072); +#35072 = AXIS2_PLACEMENT_3D('',#35073,#35074,#35075); +#35073 = CARTESIAN_POINT('',(-9.367506770275E-17,7.105427357601E-15,0.9) + ); +#35074 = DIRECTION('',(0.,0.,1.)); +#35075 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35076 = ADVANCED_FACE('',(#35077),#35120,.T.); +#35077 = FACE_BOUND('',#35078,.T.); +#35078 = EDGE_LOOP('',(#35079,#35080,#35088,#35096,#35104,#35112,#35118, + #35119)); +#35079 = ORIENTED_EDGE('',*,*,#30253,.F.); +#35080 = ORIENTED_EDGE('',*,*,#35081,.T.); +#35081 = EDGE_CURVE('',#30254,#35082,#35084,.T.); +#35082 = VERTEX_POINT('',#35083); +#35083 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#35084 = LINE('',#35085,#35086); +#35085 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#35086 = VECTOR('',#35087,1.); +#35087 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35088 = ORIENTED_EDGE('',*,*,#35089,.T.); +#35089 = EDGE_CURVE('',#35082,#35090,#35092,.T.); +#35090 = VERTEX_POINT('',#35091); +#35091 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#35092 = LINE('',#35093,#35094); +#35093 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#35094 = VECTOR('',#35095,1.); +#35095 = DIRECTION('',(0.,0.,-1.)); +#35096 = ORIENTED_EDGE('',*,*,#35097,.T.); +#35097 = EDGE_CURVE('',#35090,#35098,#35100,.T.); +#35098 = VERTEX_POINT('',#35099); +#35099 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#35100 = LINE('',#35101,#35102); +#35101 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#35102 = VECTOR('',#35103,1.); +#35103 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35104 = ORIENTED_EDGE('',*,*,#35105,.T.); +#35105 = EDGE_CURVE('',#35098,#35106,#35108,.T.); +#35106 = VERTEX_POINT('',#35107); +#35107 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35108 = LINE('',#35109,#35110); +#35109 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#35110 = VECTOR('',#35111,1.); +#35111 = DIRECTION('',(0.,0.,1.)); +#35112 = ORIENTED_EDGE('',*,*,#35113,.T.); +#35113 = EDGE_CURVE('',#35106,#30182,#35114,.T.); +#35114 = LINE('',#35115,#35116); +#35115 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35116 = VECTOR('',#35117,1.); +#35117 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35118 = ORIENTED_EDGE('',*,*,#30189,.F.); +#35119 = ORIENTED_EDGE('',*,*,#35064,.T.); +#35120 = PLANE('',#35121); +#35121 = AXIS2_PLACEMENT_3D('',#35122,#35123,#35124); +#35122 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#35123 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#35124 = DIRECTION('',(0.,0.,1.)); +#35125 = ADVANCED_FACE('',(#35126),#35144,.T.); +#35126 = FACE_BOUND('',#35127,.T.); +#35127 = EDGE_LOOP('',(#35128,#35136,#35142,#35143)); +#35128 = ORIENTED_EDGE('',*,*,#35129,.T.); +#35129 = EDGE_CURVE('',#35106,#35130,#35132,.T.); +#35130 = VERTEX_POINT('',#35131); +#35131 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#35132 = LINE('',#35133,#35134); +#35133 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35134 = VECTOR('',#35135,1.); +#35135 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35136 = ORIENTED_EDGE('',*,*,#35137,.T.); +#35137 = EDGE_CURVE('',#35130,#30174,#35138,.T.); +#35138 = LINE('',#35139,#35140); +#35139 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#35140 = VECTOR('',#35141,1.); +#35141 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35142 = ORIENTED_EDGE('',*,*,#30181,.F.); +#35143 = ORIENTED_EDGE('',*,*,#35113,.F.); +#35144 = PLANE('',#35145); +#35145 = AXIS2_PLACEMENT_3D('',#35146,#35147,#35148); +#35146 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#35147 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#35148 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35149 = ADVANCED_FACE('',(#35150),#35186,.F.); +#35150 = FACE_BOUND('',#35151,.F.); +#35151 = EDGE_LOOP('',(#35152,#35153,#35161,#35169,#35177,#35183,#35184, + #35185)); +#35152 = ORIENTED_EDGE('',*,*,#30269,.F.); +#35153 = ORIENTED_EDGE('',*,*,#35154,.T.); +#35154 = EDGE_CURVE('',#30262,#35155,#35157,.T.); +#35155 = VERTEX_POINT('',#35156); +#35156 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#35157 = LINE('',#35158,#35159); +#35158 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#35159 = VECTOR('',#35160,1.); +#35160 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35161 = ORIENTED_EDGE('',*,*,#35162,.T.); +#35162 = EDGE_CURVE('',#35155,#35163,#35165,.T.); +#35163 = VERTEX_POINT('',#35164); +#35164 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#35165 = LINE('',#35166,#35167); +#35166 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#35167 = VECTOR('',#35168,1.); +#35168 = DIRECTION('',(0.,0.,-1.)); +#35169 = ORIENTED_EDGE('',*,*,#35170,.T.); +#35170 = EDGE_CURVE('',#35163,#35171,#35173,.T.); +#35171 = VERTEX_POINT('',#35172); +#35172 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#35173 = LINE('',#35174,#35175); +#35174 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#35175 = VECTOR('',#35176,1.); +#35176 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35177 = ORIENTED_EDGE('',*,*,#35178,.T.); +#35178 = EDGE_CURVE('',#35171,#35130,#35179,.T.); +#35179 = LINE('',#35180,#35181); +#35180 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#35181 = VECTOR('',#35182,1.); +#35182 = DIRECTION('',(0.,0.,1.)); +#35183 = ORIENTED_EDGE('',*,*,#35137,.T.); +#35184 = ORIENTED_EDGE('',*,*,#30173,.F.); +#35185 = ORIENTED_EDGE('',*,*,#35049,.T.); +#35186 = PLANE('',#35187); +#35187 = AXIS2_PLACEMENT_3D('',#35188,#35189,#35190); +#35188 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#35189 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#35190 = DIRECTION('',(0.,0.,1.)); +#35191 = ADVANCED_FACE('',(#35192),#35203,.T.); +#35192 = FACE_BOUND('',#35193,.T.); +#35193 = EDGE_LOOP('',(#35194,#35195,#35196,#35202)); +#35194 = ORIENTED_EDGE('',*,*,#30261,.T.); +#35195 = ORIENTED_EDGE('',*,*,#35154,.T.); +#35196 = ORIENTED_EDGE('',*,*,#35197,.F.); +#35197 = EDGE_CURVE('',#35082,#35155,#35198,.T.); +#35198 = LINE('',#35199,#35200); +#35199 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#35200 = VECTOR('',#35201,1.); +#35201 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35202 = ORIENTED_EDGE('',*,*,#35081,.F.); +#35203 = PLANE('',#35204); +#35204 = AXIS2_PLACEMENT_3D('',#35205,#35206,#35207); +#35205 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#35206 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#35207 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#35208 = ADVANCED_FACE('',(#35209),#35220,.T.); +#35209 = FACE_BOUND('',#35210,.T.); +#35210 = EDGE_LOOP('',(#35211,#35217,#35218,#35219)); +#35211 = ORIENTED_EDGE('',*,*,#35212,.T.); +#35212 = EDGE_CURVE('',#31944,#32017,#35213,.T.); +#35213 = LINE('',#35214,#35215); +#35214 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#35215 = VECTOR('',#35216,1.); +#35216 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35217 = ORIENTED_EDGE('',*,*,#32024,.T.); +#35218 = ORIENTED_EDGE('',*,*,#31975,.F.); +#35219 = ORIENTED_EDGE('',*,*,#31951,.F.); +#35220 = PLANE('',#35221); +#35221 = AXIS2_PLACEMENT_3D('',#35222,#35223,#35224); +#35222 = CARTESIAN_POINT('',(-0.1,-48.01,1.25)); +#35223 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35224 = DIRECTION('',(0.,0.,1.)); +#35225 = ADVANCED_FACE('',(#35226),#35237,.T.); +#35226 = FACE_BOUND('',#35227,.T.); +#35227 = EDGE_LOOP('',(#35228,#35234,#35235,#35236)); +#35228 = ORIENTED_EDGE('',*,*,#35229,.T.); +#35229 = EDGE_CURVE('',#31936,#32009,#35230,.T.); +#35230 = LINE('',#35231,#35232); +#35231 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#35232 = VECTOR('',#35233,1.); +#35233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35234 = ORIENTED_EDGE('',*,*,#32016,.T.); +#35235 = ORIENTED_EDGE('',*,*,#35212,.F.); +#35236 = ORIENTED_EDGE('',*,*,#31943,.F.); +#35237 = PLANE('',#35238); +#35238 = AXIS2_PLACEMENT_3D('',#35239,#35240,#35241); +#35239 = CARTESIAN_POINT('',(-0.1,-48.51,1.25)); +#35240 = DIRECTION('',(0.,0.,1.)); +#35241 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35242 = ADVANCED_FACE('',(#35243),#35249,.T.); +#35243 = FACE_BOUND('',#35244,.T.); +#35244 = EDGE_LOOP('',(#35245,#35246,#35247,#35248)); +#35245 = ORIENTED_EDGE('',*,*,#32043,.T.); +#35246 = ORIENTED_EDGE('',*,*,#32008,.T.); +#35247 = ORIENTED_EDGE('',*,*,#35229,.F.); +#35248 = ORIENTED_EDGE('',*,*,#31935,.F.); +#35249 = PLANE('',#35250); +#35250 = AXIS2_PLACEMENT_3D('',#35251,#35252,#35253); +#35251 = CARTESIAN_POINT('',(-0.1,-48.51,7.35)); +#35252 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35253 = DIRECTION('',(0.,0.,-1.)); +#35254 = ADVANCED_FACE('',(#35255),#35266,.T.); +#35255 = FACE_BOUND('',#35256,.T.); +#35256 = EDGE_LOOP('',(#35257,#35263,#35264,#35265)); +#35257 = ORIENTED_EDGE('',*,*,#35258,.T.); +#35258 = EDGE_CURVE('',#32110,#32183,#35259,.T.); +#35259 = LINE('',#35260,#35261); +#35260 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#35261 = VECTOR('',#35262,1.); +#35262 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35263 = ORIENTED_EDGE('',*,*,#32190,.T.); +#35264 = ORIENTED_EDGE('',*,*,#32141,.F.); +#35265 = ORIENTED_EDGE('',*,*,#32117,.F.); +#35266 = PLANE('',#35267); +#35267 = AXIS2_PLACEMENT_3D('',#35268,#35269,#35270); +#35268 = CARTESIAN_POINT('',(-0.1,-45.47,1.25)); +#35269 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35270 = DIRECTION('',(0.,0.,1.)); +#35271 = ADVANCED_FACE('',(#35272),#35283,.T.); +#35272 = FACE_BOUND('',#35273,.T.); +#35273 = EDGE_LOOP('',(#35274,#35280,#35281,#35282)); +#35274 = ORIENTED_EDGE('',*,*,#35275,.T.); +#35275 = EDGE_CURVE('',#32102,#32175,#35276,.T.); +#35276 = LINE('',#35277,#35278); +#35277 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#35278 = VECTOR('',#35279,1.); +#35279 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35280 = ORIENTED_EDGE('',*,*,#32182,.T.); +#35281 = ORIENTED_EDGE('',*,*,#35258,.F.); +#35282 = ORIENTED_EDGE('',*,*,#32109,.F.); +#35283 = PLANE('',#35284); +#35284 = AXIS2_PLACEMENT_3D('',#35285,#35286,#35287); +#35285 = CARTESIAN_POINT('',(-0.1,-45.97,1.25)); +#35286 = DIRECTION('',(0.,0.,1.)); +#35287 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35288 = ADVANCED_FACE('',(#35289),#35295,.T.); +#35289 = FACE_BOUND('',#35290,.T.); +#35290 = EDGE_LOOP('',(#35291,#35292,#35293,#35294)); +#35291 = ORIENTED_EDGE('',*,*,#32209,.T.); +#35292 = ORIENTED_EDGE('',*,*,#32174,.T.); +#35293 = ORIENTED_EDGE('',*,*,#35275,.F.); +#35294 = ORIENTED_EDGE('',*,*,#32101,.F.); +#35295 = PLANE('',#35296); +#35296 = AXIS2_PLACEMENT_3D('',#35297,#35298,#35299); +#35297 = CARTESIAN_POINT('',(-0.1,-45.97,7.35)); +#35298 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35299 = DIRECTION('',(0.,0.,-1.)); +#35300 = ADVANCED_FACE('',(#35301),#35312,.T.); +#35301 = FACE_BOUND('',#35302,.T.); +#35302 = EDGE_LOOP('',(#35303,#35309,#35310,#35311)); +#35303 = ORIENTED_EDGE('',*,*,#35304,.T.); +#35304 = EDGE_CURVE('',#32276,#32349,#35305,.T.); +#35305 = LINE('',#35306,#35307); +#35306 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#35307 = VECTOR('',#35308,1.); +#35308 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35309 = ORIENTED_EDGE('',*,*,#32356,.T.); +#35310 = ORIENTED_EDGE('',*,*,#32307,.F.); +#35311 = ORIENTED_EDGE('',*,*,#32283,.F.); +#35312 = PLANE('',#35313); +#35313 = AXIS2_PLACEMENT_3D('',#35314,#35315,#35316); +#35314 = CARTESIAN_POINT('',(-0.1,-42.93,1.25)); +#35315 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35316 = DIRECTION('',(0.,0.,1.)); +#35317 = ADVANCED_FACE('',(#35318),#35329,.T.); +#35318 = FACE_BOUND('',#35319,.T.); +#35319 = EDGE_LOOP('',(#35320,#35326,#35327,#35328)); +#35320 = ORIENTED_EDGE('',*,*,#35321,.T.); +#35321 = EDGE_CURVE('',#32268,#32341,#35322,.T.); +#35322 = LINE('',#35323,#35324); +#35323 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#35324 = VECTOR('',#35325,1.); +#35325 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35326 = ORIENTED_EDGE('',*,*,#32348,.T.); +#35327 = ORIENTED_EDGE('',*,*,#35304,.F.); +#35328 = ORIENTED_EDGE('',*,*,#32275,.F.); +#35329 = PLANE('',#35330); +#35330 = AXIS2_PLACEMENT_3D('',#35331,#35332,#35333); +#35331 = CARTESIAN_POINT('',(-0.1,-43.43,1.25)); +#35332 = DIRECTION('',(0.,0.,1.)); +#35333 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35334 = ADVANCED_FACE('',(#35335),#35341,.T.); +#35335 = FACE_BOUND('',#35336,.T.); +#35336 = EDGE_LOOP('',(#35337,#35338,#35339,#35340)); +#35337 = ORIENTED_EDGE('',*,*,#32375,.T.); +#35338 = ORIENTED_EDGE('',*,*,#32340,.T.); +#35339 = ORIENTED_EDGE('',*,*,#35321,.F.); +#35340 = ORIENTED_EDGE('',*,*,#32267,.F.); +#35341 = PLANE('',#35342); +#35342 = AXIS2_PLACEMENT_3D('',#35343,#35344,#35345); +#35343 = CARTESIAN_POINT('',(-0.1,-43.43,7.35)); +#35344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35345 = DIRECTION('',(0.,0.,-1.)); +#35346 = ADVANCED_FACE('',(#35347),#35358,.T.); +#35347 = FACE_BOUND('',#35348,.T.); +#35348 = EDGE_LOOP('',(#35349,#35355,#35356,#35357)); +#35349 = ORIENTED_EDGE('',*,*,#35350,.T.); +#35350 = EDGE_CURVE('',#32442,#32515,#35351,.T.); +#35351 = LINE('',#35352,#35353); +#35352 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#35353 = VECTOR('',#35354,1.); +#35354 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35355 = ORIENTED_EDGE('',*,*,#32522,.T.); +#35356 = ORIENTED_EDGE('',*,*,#32473,.F.); +#35357 = ORIENTED_EDGE('',*,*,#32449,.F.); +#35358 = PLANE('',#35359); +#35359 = AXIS2_PLACEMENT_3D('',#35360,#35361,#35362); +#35360 = CARTESIAN_POINT('',(-0.1,-40.39,1.25)); +#35361 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35362 = DIRECTION('',(0.,0.,1.)); +#35363 = ADVANCED_FACE('',(#35364),#35375,.T.); +#35364 = FACE_BOUND('',#35365,.T.); +#35365 = EDGE_LOOP('',(#35366,#35372,#35373,#35374)); +#35366 = ORIENTED_EDGE('',*,*,#35367,.T.); +#35367 = EDGE_CURVE('',#32434,#32507,#35368,.T.); +#35368 = LINE('',#35369,#35370); +#35369 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#35370 = VECTOR('',#35371,1.); +#35371 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35372 = ORIENTED_EDGE('',*,*,#32514,.T.); +#35373 = ORIENTED_EDGE('',*,*,#35350,.F.); +#35374 = ORIENTED_EDGE('',*,*,#32441,.F.); +#35375 = PLANE('',#35376); +#35376 = AXIS2_PLACEMENT_3D('',#35377,#35378,#35379); +#35377 = CARTESIAN_POINT('',(-0.1,-40.89,1.25)); +#35378 = DIRECTION('',(0.,0.,1.)); +#35379 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35380 = ADVANCED_FACE('',(#35381),#35387,.T.); +#35381 = FACE_BOUND('',#35382,.T.); +#35382 = EDGE_LOOP('',(#35383,#35384,#35385,#35386)); +#35383 = ORIENTED_EDGE('',*,*,#32541,.T.); +#35384 = ORIENTED_EDGE('',*,*,#32506,.T.); +#35385 = ORIENTED_EDGE('',*,*,#35367,.F.); +#35386 = ORIENTED_EDGE('',*,*,#32433,.F.); +#35387 = PLANE('',#35388); +#35388 = AXIS2_PLACEMENT_3D('',#35389,#35390,#35391); +#35389 = CARTESIAN_POINT('',(-0.1,-40.89,7.35)); +#35390 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35391 = DIRECTION('',(0.,0.,-1.)); +#35392 = ADVANCED_FACE('',(#35393),#35404,.T.); +#35393 = FACE_BOUND('',#35394,.T.); +#35394 = EDGE_LOOP('',(#35395,#35401,#35402,#35403)); +#35395 = ORIENTED_EDGE('',*,*,#35396,.T.); +#35396 = EDGE_CURVE('',#32608,#32681,#35397,.T.); +#35397 = LINE('',#35398,#35399); +#35398 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#35399 = VECTOR('',#35400,1.); +#35400 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35401 = ORIENTED_EDGE('',*,*,#32688,.T.); +#35402 = ORIENTED_EDGE('',*,*,#32639,.F.); +#35403 = ORIENTED_EDGE('',*,*,#32615,.F.); +#35404 = PLANE('',#35405); +#35405 = AXIS2_PLACEMENT_3D('',#35406,#35407,#35408); +#35406 = CARTESIAN_POINT('',(-0.1,-37.85,1.25)); +#35407 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35408 = DIRECTION('',(0.,0.,1.)); +#35409 = ADVANCED_FACE('',(#35410),#35421,.T.); +#35410 = FACE_BOUND('',#35411,.T.); +#35411 = EDGE_LOOP('',(#35412,#35418,#35419,#35420)); +#35412 = ORIENTED_EDGE('',*,*,#35413,.T.); +#35413 = EDGE_CURVE('',#32600,#32673,#35414,.T.); +#35414 = LINE('',#35415,#35416); +#35415 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#35416 = VECTOR('',#35417,1.); +#35417 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35418 = ORIENTED_EDGE('',*,*,#32680,.T.); +#35419 = ORIENTED_EDGE('',*,*,#35396,.F.); +#35420 = ORIENTED_EDGE('',*,*,#32607,.F.); +#35421 = PLANE('',#35422); +#35422 = AXIS2_PLACEMENT_3D('',#35423,#35424,#35425); +#35423 = CARTESIAN_POINT('',(-0.1,-38.35,1.25)); +#35424 = DIRECTION('',(0.,0.,1.)); +#35425 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35426 = ADVANCED_FACE('',(#35427),#35433,.T.); +#35427 = FACE_BOUND('',#35428,.T.); +#35428 = EDGE_LOOP('',(#35429,#35430,#35431,#35432)); +#35429 = ORIENTED_EDGE('',*,*,#32707,.T.); +#35430 = ORIENTED_EDGE('',*,*,#32672,.T.); +#35431 = ORIENTED_EDGE('',*,*,#35413,.F.); +#35432 = ORIENTED_EDGE('',*,*,#32599,.F.); +#35433 = PLANE('',#35434); +#35434 = AXIS2_PLACEMENT_3D('',#35435,#35436,#35437); +#35435 = CARTESIAN_POINT('',(-0.1,-38.35,7.35)); +#35436 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35437 = DIRECTION('',(0.,0.,-1.)); +#35438 = ADVANCED_FACE('',(#35439),#35450,.T.); +#35439 = FACE_BOUND('',#35440,.T.); +#35440 = EDGE_LOOP('',(#35441,#35447,#35448,#35449)); +#35441 = ORIENTED_EDGE('',*,*,#35442,.T.); +#35442 = EDGE_CURVE('',#32774,#32847,#35443,.T.); +#35443 = LINE('',#35444,#35445); +#35444 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#35445 = VECTOR('',#35446,1.); +#35446 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35447 = ORIENTED_EDGE('',*,*,#32854,.T.); +#35448 = ORIENTED_EDGE('',*,*,#32805,.F.); +#35449 = ORIENTED_EDGE('',*,*,#32781,.F.); +#35450 = PLANE('',#35451); +#35451 = AXIS2_PLACEMENT_3D('',#35452,#35453,#35454); +#35452 = CARTESIAN_POINT('',(-0.1,-35.31,1.25)); +#35453 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35454 = DIRECTION('',(0.,0.,1.)); +#35455 = ADVANCED_FACE('',(#35456),#35467,.T.); +#35456 = FACE_BOUND('',#35457,.T.); +#35457 = EDGE_LOOP('',(#35458,#35464,#35465,#35466)); +#35458 = ORIENTED_EDGE('',*,*,#35459,.T.); +#35459 = EDGE_CURVE('',#32766,#32839,#35460,.T.); +#35460 = LINE('',#35461,#35462); +#35461 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#35462 = VECTOR('',#35463,1.); +#35463 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35464 = ORIENTED_EDGE('',*,*,#32846,.T.); +#35465 = ORIENTED_EDGE('',*,*,#35442,.F.); +#35466 = ORIENTED_EDGE('',*,*,#32773,.F.); +#35467 = PLANE('',#35468); +#35468 = AXIS2_PLACEMENT_3D('',#35469,#35470,#35471); +#35469 = CARTESIAN_POINT('',(-0.1,-35.81,1.25)); +#35470 = DIRECTION('',(0.,0.,1.)); +#35471 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35472 = ADVANCED_FACE('',(#35473),#35479,.T.); +#35473 = FACE_BOUND('',#35474,.T.); +#35474 = EDGE_LOOP('',(#35475,#35476,#35477,#35478)); +#35475 = ORIENTED_EDGE('',*,*,#32873,.T.); +#35476 = ORIENTED_EDGE('',*,*,#32838,.T.); +#35477 = ORIENTED_EDGE('',*,*,#35459,.F.); +#35478 = ORIENTED_EDGE('',*,*,#32765,.F.); +#35479 = PLANE('',#35480); +#35480 = AXIS2_PLACEMENT_3D('',#35481,#35482,#35483); +#35481 = CARTESIAN_POINT('',(-0.1,-35.81,7.35)); +#35482 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35483 = DIRECTION('',(0.,0.,-1.)); +#35484 = ADVANCED_FACE('',(#35485),#35496,.T.); +#35485 = FACE_BOUND('',#35486,.T.); +#35486 = EDGE_LOOP('',(#35487,#35493,#35494,#35495)); +#35487 = ORIENTED_EDGE('',*,*,#35488,.T.); +#35488 = EDGE_CURVE('',#32940,#33013,#35489,.T.); +#35489 = LINE('',#35490,#35491); +#35490 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#35491 = VECTOR('',#35492,1.); +#35492 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35493 = ORIENTED_EDGE('',*,*,#33020,.T.); +#35494 = ORIENTED_EDGE('',*,*,#32971,.F.); +#35495 = ORIENTED_EDGE('',*,*,#32947,.F.); +#35496 = PLANE('',#35497); +#35497 = AXIS2_PLACEMENT_3D('',#35498,#35499,#35500); +#35498 = CARTESIAN_POINT('',(-0.1,-32.77,1.25)); +#35499 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35500 = DIRECTION('',(0.,0.,1.)); +#35501 = ADVANCED_FACE('',(#35502),#35513,.T.); +#35502 = FACE_BOUND('',#35503,.T.); +#35503 = EDGE_LOOP('',(#35504,#35510,#35511,#35512)); +#35504 = ORIENTED_EDGE('',*,*,#35505,.T.); +#35505 = EDGE_CURVE('',#32932,#33005,#35506,.T.); +#35506 = LINE('',#35507,#35508); +#35507 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#35508 = VECTOR('',#35509,1.); +#35509 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35510 = ORIENTED_EDGE('',*,*,#33012,.T.); +#35511 = ORIENTED_EDGE('',*,*,#35488,.F.); +#35512 = ORIENTED_EDGE('',*,*,#32939,.F.); +#35513 = PLANE('',#35514); +#35514 = AXIS2_PLACEMENT_3D('',#35515,#35516,#35517); +#35515 = CARTESIAN_POINT('',(-0.1,-33.27,1.25)); +#35516 = DIRECTION('',(0.,0.,1.)); +#35517 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35518 = ADVANCED_FACE('',(#35519),#35525,.T.); +#35519 = FACE_BOUND('',#35520,.T.); +#35520 = EDGE_LOOP('',(#35521,#35522,#35523,#35524)); +#35521 = ORIENTED_EDGE('',*,*,#33039,.T.); +#35522 = ORIENTED_EDGE('',*,*,#33004,.T.); +#35523 = ORIENTED_EDGE('',*,*,#35505,.F.); +#35524 = ORIENTED_EDGE('',*,*,#32931,.F.); +#35525 = PLANE('',#35526); +#35526 = AXIS2_PLACEMENT_3D('',#35527,#35528,#35529); +#35527 = CARTESIAN_POINT('',(-0.1,-33.27,7.35)); +#35528 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35529 = DIRECTION('',(0.,0.,-1.)); +#35530 = ADVANCED_FACE('',(#35531),#35542,.T.); +#35531 = FACE_BOUND('',#35532,.T.); +#35532 = EDGE_LOOP('',(#35533,#35539,#35540,#35541)); +#35533 = ORIENTED_EDGE('',*,*,#35534,.T.); +#35534 = EDGE_CURVE('',#33106,#33179,#35535,.T.); +#35535 = LINE('',#35536,#35537); +#35536 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#35537 = VECTOR('',#35538,1.); +#35538 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35539 = ORIENTED_EDGE('',*,*,#33186,.T.); +#35540 = ORIENTED_EDGE('',*,*,#33137,.F.); +#35541 = ORIENTED_EDGE('',*,*,#33113,.F.); +#35542 = PLANE('',#35543); +#35543 = AXIS2_PLACEMENT_3D('',#35544,#35545,#35546); +#35544 = CARTESIAN_POINT('',(-0.1,-30.23,1.25)); +#35545 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35546 = DIRECTION('',(0.,0.,1.)); +#35547 = ADVANCED_FACE('',(#35548),#35559,.T.); +#35548 = FACE_BOUND('',#35549,.T.); +#35549 = EDGE_LOOP('',(#35550,#35556,#35557,#35558)); +#35550 = ORIENTED_EDGE('',*,*,#35551,.T.); +#35551 = EDGE_CURVE('',#33098,#33171,#35552,.T.); +#35552 = LINE('',#35553,#35554); +#35553 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#35554 = VECTOR('',#35555,1.); +#35555 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35556 = ORIENTED_EDGE('',*,*,#33178,.T.); +#35557 = ORIENTED_EDGE('',*,*,#35534,.F.); +#35558 = ORIENTED_EDGE('',*,*,#33105,.F.); +#35559 = PLANE('',#35560); +#35560 = AXIS2_PLACEMENT_3D('',#35561,#35562,#35563); +#35561 = CARTESIAN_POINT('',(-0.1,-30.73,1.25)); +#35562 = DIRECTION('',(0.,0.,1.)); +#35563 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35564 = ADVANCED_FACE('',(#35565),#35571,.T.); +#35565 = FACE_BOUND('',#35566,.T.); +#35566 = EDGE_LOOP('',(#35567,#35568,#35569,#35570)); +#35567 = ORIENTED_EDGE('',*,*,#33205,.T.); +#35568 = ORIENTED_EDGE('',*,*,#33170,.T.); +#35569 = ORIENTED_EDGE('',*,*,#35551,.F.); +#35570 = ORIENTED_EDGE('',*,*,#33097,.F.); +#35571 = PLANE('',#35572); +#35572 = AXIS2_PLACEMENT_3D('',#35573,#35574,#35575); +#35573 = CARTESIAN_POINT('',(-0.1,-30.73,7.35)); +#35574 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35575 = DIRECTION('',(0.,0.,-1.)); +#35576 = ADVANCED_FACE('',(#35577),#35588,.T.); +#35577 = FACE_BOUND('',#35578,.T.); +#35578 = EDGE_LOOP('',(#35579,#35585,#35586,#35587)); +#35579 = ORIENTED_EDGE('',*,*,#35580,.T.); +#35580 = EDGE_CURVE('',#33272,#33345,#35581,.T.); +#35581 = LINE('',#35582,#35583); +#35582 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#35583 = VECTOR('',#35584,1.); +#35584 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35585 = ORIENTED_EDGE('',*,*,#33352,.T.); +#35586 = ORIENTED_EDGE('',*,*,#33303,.F.); +#35587 = ORIENTED_EDGE('',*,*,#33279,.F.); +#35588 = PLANE('',#35589); +#35589 = AXIS2_PLACEMENT_3D('',#35590,#35591,#35592); +#35590 = CARTESIAN_POINT('',(-0.1,-27.69,1.25)); +#35591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35592 = DIRECTION('',(0.,0.,1.)); +#35593 = ADVANCED_FACE('',(#35594),#35605,.T.); +#35594 = FACE_BOUND('',#35595,.T.); +#35595 = EDGE_LOOP('',(#35596,#35602,#35603,#35604)); +#35596 = ORIENTED_EDGE('',*,*,#35597,.T.); +#35597 = EDGE_CURVE('',#33264,#33337,#35598,.T.); +#35598 = LINE('',#35599,#35600); +#35599 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#35600 = VECTOR('',#35601,1.); +#35601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35602 = ORIENTED_EDGE('',*,*,#33344,.T.); +#35603 = ORIENTED_EDGE('',*,*,#35580,.F.); +#35604 = ORIENTED_EDGE('',*,*,#33271,.F.); +#35605 = PLANE('',#35606); +#35606 = AXIS2_PLACEMENT_3D('',#35607,#35608,#35609); +#35607 = CARTESIAN_POINT('',(-0.1,-28.19,1.25)); +#35608 = DIRECTION('',(0.,0.,1.)); +#35609 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35610 = ADVANCED_FACE('',(#35611),#35617,.T.); +#35611 = FACE_BOUND('',#35612,.T.); +#35612 = EDGE_LOOP('',(#35613,#35614,#35615,#35616)); +#35613 = ORIENTED_EDGE('',*,*,#33371,.T.); +#35614 = ORIENTED_EDGE('',*,*,#33336,.T.); +#35615 = ORIENTED_EDGE('',*,*,#35597,.F.); +#35616 = ORIENTED_EDGE('',*,*,#33263,.F.); +#35617 = PLANE('',#35618); +#35618 = AXIS2_PLACEMENT_3D('',#35619,#35620,#35621); +#35619 = CARTESIAN_POINT('',(-0.1,-28.19,7.35)); +#35620 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35621 = DIRECTION('',(0.,0.,-1.)); +#35622 = ADVANCED_FACE('',(#35623),#35634,.T.); +#35623 = FACE_BOUND('',#35624,.T.); +#35624 = EDGE_LOOP('',(#35625,#35631,#35632,#35633)); +#35625 = ORIENTED_EDGE('',*,*,#35626,.T.); +#35626 = EDGE_CURVE('',#33438,#33511,#35627,.T.); +#35627 = LINE('',#35628,#35629); +#35628 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#35629 = VECTOR('',#35630,1.); +#35630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35631 = ORIENTED_EDGE('',*,*,#33518,.T.); +#35632 = ORIENTED_EDGE('',*,*,#33469,.F.); +#35633 = ORIENTED_EDGE('',*,*,#33445,.F.); +#35634 = PLANE('',#35635); +#35635 = AXIS2_PLACEMENT_3D('',#35636,#35637,#35638); +#35636 = CARTESIAN_POINT('',(-0.1,-25.15,1.25)); +#35637 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35638 = DIRECTION('',(0.,0.,1.)); +#35639 = ADVANCED_FACE('',(#35640),#35651,.T.); +#35640 = FACE_BOUND('',#35641,.T.); +#35641 = EDGE_LOOP('',(#35642,#35648,#35649,#35650)); +#35642 = ORIENTED_EDGE('',*,*,#35643,.T.); +#35643 = EDGE_CURVE('',#33430,#33503,#35644,.T.); +#35644 = LINE('',#35645,#35646); +#35645 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#35646 = VECTOR('',#35647,1.); +#35647 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35648 = ORIENTED_EDGE('',*,*,#33510,.T.); +#35649 = ORIENTED_EDGE('',*,*,#35626,.F.); +#35650 = ORIENTED_EDGE('',*,*,#33437,.F.); +#35651 = PLANE('',#35652); +#35652 = AXIS2_PLACEMENT_3D('',#35653,#35654,#35655); +#35653 = CARTESIAN_POINT('',(-0.1,-25.65,1.25)); +#35654 = DIRECTION('',(0.,0.,1.)); +#35655 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35656 = ADVANCED_FACE('',(#35657),#35663,.T.); +#35657 = FACE_BOUND('',#35658,.T.); +#35658 = EDGE_LOOP('',(#35659,#35660,#35661,#35662)); +#35659 = ORIENTED_EDGE('',*,*,#33537,.T.); +#35660 = ORIENTED_EDGE('',*,*,#33502,.T.); +#35661 = ORIENTED_EDGE('',*,*,#35643,.F.); +#35662 = ORIENTED_EDGE('',*,*,#33429,.F.); +#35663 = PLANE('',#35664); +#35664 = AXIS2_PLACEMENT_3D('',#35665,#35666,#35667); +#35665 = CARTESIAN_POINT('',(-0.1,-25.65,7.35)); +#35666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35667 = DIRECTION('',(0.,0.,-1.)); +#35668 = ADVANCED_FACE('',(#35669),#35680,.T.); +#35669 = FACE_BOUND('',#35670,.T.); +#35670 = EDGE_LOOP('',(#35671,#35677,#35678,#35679)); +#35671 = ORIENTED_EDGE('',*,*,#35672,.T.); +#35672 = EDGE_CURVE('',#33604,#33677,#35673,.T.); +#35673 = LINE('',#35674,#35675); +#35674 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#35675 = VECTOR('',#35676,1.); +#35676 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35677 = ORIENTED_EDGE('',*,*,#33684,.T.); +#35678 = ORIENTED_EDGE('',*,*,#33635,.F.); +#35679 = ORIENTED_EDGE('',*,*,#33611,.F.); +#35680 = PLANE('',#35681); +#35681 = AXIS2_PLACEMENT_3D('',#35682,#35683,#35684); +#35682 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#35683 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35684 = DIRECTION('',(0.,0.,1.)); +#35685 = ADVANCED_FACE('',(#35686),#35697,.T.); +#35686 = FACE_BOUND('',#35687,.T.); +#35687 = EDGE_LOOP('',(#35688,#35694,#35695,#35696)); +#35688 = ORIENTED_EDGE('',*,*,#35689,.T.); +#35689 = EDGE_CURVE('',#33596,#33669,#35690,.T.); +#35690 = LINE('',#35691,#35692); +#35691 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#35692 = VECTOR('',#35693,1.); +#35693 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35694 = ORIENTED_EDGE('',*,*,#33676,.T.); +#35695 = ORIENTED_EDGE('',*,*,#35672,.F.); +#35696 = ORIENTED_EDGE('',*,*,#33603,.F.); +#35697 = PLANE('',#35698); +#35698 = AXIS2_PLACEMENT_3D('',#35699,#35700,#35701); +#35699 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#35700 = DIRECTION('',(0.,0.,1.)); +#35701 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35702 = ADVANCED_FACE('',(#35703),#35709,.T.); +#35703 = FACE_BOUND('',#35704,.T.); +#35704 = EDGE_LOOP('',(#35705,#35706,#35707,#35708)); +#35705 = ORIENTED_EDGE('',*,*,#33703,.T.); +#35706 = ORIENTED_EDGE('',*,*,#33668,.T.); +#35707 = ORIENTED_EDGE('',*,*,#35689,.F.); +#35708 = ORIENTED_EDGE('',*,*,#33595,.F.); +#35709 = PLANE('',#35710); +#35710 = AXIS2_PLACEMENT_3D('',#35711,#35712,#35713); +#35711 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#35712 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35713 = DIRECTION('',(0.,0.,-1.)); +#35714 = ADVANCED_FACE('',(#35715),#35726,.T.); +#35715 = FACE_BOUND('',#35716,.T.); +#35716 = EDGE_LOOP('',(#35717,#35723,#35724,#35725)); +#35717 = ORIENTED_EDGE('',*,*,#35718,.T.); +#35718 = EDGE_CURVE('',#33770,#33843,#35719,.T.); +#35719 = LINE('',#35720,#35721); +#35720 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#35721 = VECTOR('',#35722,1.); +#35722 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35723 = ORIENTED_EDGE('',*,*,#33850,.T.); +#35724 = ORIENTED_EDGE('',*,*,#33801,.F.); +#35725 = ORIENTED_EDGE('',*,*,#33777,.F.); +#35726 = PLANE('',#35727); +#35727 = AXIS2_PLACEMENT_3D('',#35728,#35729,#35730); +#35728 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#35729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35730 = DIRECTION('',(0.,0.,1.)); +#35731 = ADVANCED_FACE('',(#35732),#35743,.T.); +#35732 = FACE_BOUND('',#35733,.T.); +#35733 = EDGE_LOOP('',(#35734,#35740,#35741,#35742)); +#35734 = ORIENTED_EDGE('',*,*,#35735,.T.); +#35735 = EDGE_CURVE('',#33762,#33835,#35736,.T.); +#35736 = LINE('',#35737,#35738); +#35737 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#35738 = VECTOR('',#35739,1.); +#35739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35740 = ORIENTED_EDGE('',*,*,#33842,.T.); +#35741 = ORIENTED_EDGE('',*,*,#35718,.F.); +#35742 = ORIENTED_EDGE('',*,*,#33769,.F.); +#35743 = PLANE('',#35744); +#35744 = AXIS2_PLACEMENT_3D('',#35745,#35746,#35747); +#35745 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#35746 = DIRECTION('',(0.,0.,1.)); +#35747 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35748 = ADVANCED_FACE('',(#35749),#35755,.T.); +#35749 = FACE_BOUND('',#35750,.T.); +#35750 = EDGE_LOOP('',(#35751,#35752,#35753,#35754)); +#35751 = ORIENTED_EDGE('',*,*,#33869,.T.); +#35752 = ORIENTED_EDGE('',*,*,#33834,.T.); +#35753 = ORIENTED_EDGE('',*,*,#35735,.F.); +#35754 = ORIENTED_EDGE('',*,*,#33761,.F.); +#35755 = PLANE('',#35756); +#35756 = AXIS2_PLACEMENT_3D('',#35757,#35758,#35759); +#35757 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#35758 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35759 = DIRECTION('',(0.,0.,-1.)); +#35760 = ADVANCED_FACE('',(#35761),#35772,.T.); +#35761 = FACE_BOUND('',#35762,.T.); +#35762 = EDGE_LOOP('',(#35763,#35769,#35770,#35771)); +#35763 = ORIENTED_EDGE('',*,*,#35764,.T.); +#35764 = EDGE_CURVE('',#33936,#34009,#35765,.T.); +#35765 = LINE('',#35766,#35767); +#35766 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#35767 = VECTOR('',#35768,1.); +#35768 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35769 = ORIENTED_EDGE('',*,*,#34016,.T.); +#35770 = ORIENTED_EDGE('',*,*,#33967,.F.); +#35771 = ORIENTED_EDGE('',*,*,#33943,.F.); +#35772 = PLANE('',#35773); +#35773 = AXIS2_PLACEMENT_3D('',#35774,#35775,#35776); +#35774 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#35775 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35776 = DIRECTION('',(0.,0.,1.)); +#35777 = ADVANCED_FACE('',(#35778),#35789,.T.); +#35778 = FACE_BOUND('',#35779,.T.); +#35779 = EDGE_LOOP('',(#35780,#35786,#35787,#35788)); +#35780 = ORIENTED_EDGE('',*,*,#35781,.T.); +#35781 = EDGE_CURVE('',#33928,#34001,#35782,.T.); +#35782 = LINE('',#35783,#35784); +#35783 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#35784 = VECTOR('',#35785,1.); +#35785 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35786 = ORIENTED_EDGE('',*,*,#34008,.T.); +#35787 = ORIENTED_EDGE('',*,*,#35764,.F.); +#35788 = ORIENTED_EDGE('',*,*,#33935,.F.); +#35789 = PLANE('',#35790); +#35790 = AXIS2_PLACEMENT_3D('',#35791,#35792,#35793); +#35791 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#35792 = DIRECTION('',(0.,0.,1.)); +#35793 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35794 = ADVANCED_FACE('',(#35795),#35801,.T.); +#35795 = FACE_BOUND('',#35796,.T.); +#35796 = EDGE_LOOP('',(#35797,#35798,#35799,#35800)); +#35797 = ORIENTED_EDGE('',*,*,#34035,.T.); +#35798 = ORIENTED_EDGE('',*,*,#34000,.T.); +#35799 = ORIENTED_EDGE('',*,*,#35781,.F.); +#35800 = ORIENTED_EDGE('',*,*,#33927,.F.); +#35801 = PLANE('',#35802); +#35802 = AXIS2_PLACEMENT_3D('',#35803,#35804,#35805); +#35803 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#35804 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35805 = DIRECTION('',(0.,0.,-1.)); +#35806 = ADVANCED_FACE('',(#35807),#35818,.T.); +#35807 = FACE_BOUND('',#35808,.T.); +#35808 = EDGE_LOOP('',(#35809,#35815,#35816,#35817)); +#35809 = ORIENTED_EDGE('',*,*,#35810,.T.); +#35810 = EDGE_CURVE('',#34102,#34175,#35811,.T.); +#35811 = LINE('',#35812,#35813); +#35812 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#35813 = VECTOR('',#35814,1.); +#35814 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35815 = ORIENTED_EDGE('',*,*,#34182,.T.); +#35816 = ORIENTED_EDGE('',*,*,#34133,.F.); +#35817 = ORIENTED_EDGE('',*,*,#34109,.F.); +#35818 = PLANE('',#35819); +#35819 = AXIS2_PLACEMENT_3D('',#35820,#35821,#35822); +#35820 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#35821 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35822 = DIRECTION('',(0.,0.,1.)); +#35823 = ADVANCED_FACE('',(#35824),#35835,.T.); +#35824 = FACE_BOUND('',#35825,.T.); +#35825 = EDGE_LOOP('',(#35826,#35832,#35833,#35834)); +#35826 = ORIENTED_EDGE('',*,*,#35827,.T.); +#35827 = EDGE_CURVE('',#34094,#34167,#35828,.T.); +#35828 = LINE('',#35829,#35830); +#35829 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#35830 = VECTOR('',#35831,1.); +#35831 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35832 = ORIENTED_EDGE('',*,*,#34174,.T.); +#35833 = ORIENTED_EDGE('',*,*,#35810,.F.); +#35834 = ORIENTED_EDGE('',*,*,#34101,.F.); +#35835 = PLANE('',#35836); +#35836 = AXIS2_PLACEMENT_3D('',#35837,#35838,#35839); +#35837 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#35838 = DIRECTION('',(0.,0.,1.)); +#35839 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35840 = ADVANCED_FACE('',(#35841),#35847,.T.); +#35841 = FACE_BOUND('',#35842,.T.); +#35842 = EDGE_LOOP('',(#35843,#35844,#35845,#35846)); +#35843 = ORIENTED_EDGE('',*,*,#34201,.T.); +#35844 = ORIENTED_EDGE('',*,*,#34166,.T.); +#35845 = ORIENTED_EDGE('',*,*,#35827,.F.); +#35846 = ORIENTED_EDGE('',*,*,#34093,.F.); +#35847 = PLANE('',#35848); +#35848 = AXIS2_PLACEMENT_3D('',#35849,#35850,#35851); +#35849 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#35850 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35851 = DIRECTION('',(0.,0.,-1.)); +#35852 = ADVANCED_FACE('',(#35853),#35864,.T.); +#35853 = FACE_BOUND('',#35854,.T.); +#35854 = EDGE_LOOP('',(#35855,#35861,#35862,#35863)); +#35855 = ORIENTED_EDGE('',*,*,#35856,.T.); +#35856 = EDGE_CURVE('',#34268,#34341,#35857,.T.); +#35857 = LINE('',#35858,#35859); +#35858 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#35859 = VECTOR('',#35860,1.); +#35860 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35861 = ORIENTED_EDGE('',*,*,#34348,.T.); +#35862 = ORIENTED_EDGE('',*,*,#34299,.F.); +#35863 = ORIENTED_EDGE('',*,*,#34275,.F.); +#35864 = PLANE('',#35865); +#35865 = AXIS2_PLACEMENT_3D('',#35866,#35867,#35868); +#35866 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#35867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35868 = DIRECTION('',(0.,0.,1.)); +#35869 = ADVANCED_FACE('',(#35870),#35881,.T.); +#35870 = FACE_BOUND('',#35871,.T.); +#35871 = EDGE_LOOP('',(#35872,#35878,#35879,#35880)); +#35872 = ORIENTED_EDGE('',*,*,#35873,.T.); +#35873 = EDGE_CURVE('',#34260,#34333,#35874,.T.); +#35874 = LINE('',#35875,#35876); +#35875 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#35876 = VECTOR('',#35877,1.); +#35877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35878 = ORIENTED_EDGE('',*,*,#34340,.T.); +#35879 = ORIENTED_EDGE('',*,*,#35856,.F.); +#35880 = ORIENTED_EDGE('',*,*,#34267,.F.); +#35881 = PLANE('',#35882); +#35882 = AXIS2_PLACEMENT_3D('',#35883,#35884,#35885); +#35883 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#35884 = DIRECTION('',(0.,0.,1.)); +#35885 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35886 = ADVANCED_FACE('',(#35887),#35893,.T.); +#35887 = FACE_BOUND('',#35888,.T.); +#35888 = EDGE_LOOP('',(#35889,#35890,#35891,#35892)); +#35889 = ORIENTED_EDGE('',*,*,#34367,.T.); +#35890 = ORIENTED_EDGE('',*,*,#34332,.T.); +#35891 = ORIENTED_EDGE('',*,*,#35873,.F.); +#35892 = ORIENTED_EDGE('',*,*,#34259,.F.); +#35893 = PLANE('',#35894); +#35894 = AXIS2_PLACEMENT_3D('',#35895,#35896,#35897); +#35895 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#35896 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35897 = DIRECTION('',(0.,0.,-1.)); +#35898 = ADVANCED_FACE('',(#35899),#35910,.T.); +#35899 = FACE_BOUND('',#35900,.T.); +#35900 = EDGE_LOOP('',(#35901,#35907,#35908,#35909)); +#35901 = ORIENTED_EDGE('',*,*,#35902,.T.); +#35902 = EDGE_CURVE('',#34434,#34507,#35903,.T.); +#35903 = LINE('',#35904,#35905); +#35904 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#35905 = VECTOR('',#35906,1.); +#35906 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35907 = ORIENTED_EDGE('',*,*,#34514,.T.); +#35908 = ORIENTED_EDGE('',*,*,#34465,.F.); +#35909 = ORIENTED_EDGE('',*,*,#34441,.F.); +#35910 = PLANE('',#35911); +#35911 = AXIS2_PLACEMENT_3D('',#35912,#35913,#35914); +#35912 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#35913 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35914 = DIRECTION('',(0.,0.,1.)); +#35915 = ADVANCED_FACE('',(#35916),#35927,.T.); +#35916 = FACE_BOUND('',#35917,.T.); +#35917 = EDGE_LOOP('',(#35918,#35924,#35925,#35926)); +#35918 = ORIENTED_EDGE('',*,*,#35919,.T.); +#35919 = EDGE_CURVE('',#34426,#34499,#35920,.T.); +#35920 = LINE('',#35921,#35922); +#35921 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#35922 = VECTOR('',#35923,1.); +#35923 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35924 = ORIENTED_EDGE('',*,*,#34506,.T.); +#35925 = ORIENTED_EDGE('',*,*,#35902,.F.); +#35926 = ORIENTED_EDGE('',*,*,#34433,.F.); +#35927 = PLANE('',#35928); +#35928 = AXIS2_PLACEMENT_3D('',#35929,#35930,#35931); +#35929 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#35930 = DIRECTION('',(0.,0.,1.)); +#35931 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35932 = ADVANCED_FACE('',(#35933),#35939,.T.); +#35933 = FACE_BOUND('',#35934,.T.); +#35934 = EDGE_LOOP('',(#35935,#35936,#35937,#35938)); +#35935 = ORIENTED_EDGE('',*,*,#34533,.T.); +#35936 = ORIENTED_EDGE('',*,*,#34498,.T.); +#35937 = ORIENTED_EDGE('',*,*,#35919,.F.); +#35938 = ORIENTED_EDGE('',*,*,#34425,.F.); +#35939 = PLANE('',#35940); +#35940 = AXIS2_PLACEMENT_3D('',#35941,#35942,#35943); +#35941 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#35942 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35943 = DIRECTION('',(0.,0.,-1.)); +#35944 = ADVANCED_FACE('',(#35945),#35956,.T.); +#35945 = FACE_BOUND('',#35946,.T.); +#35946 = EDGE_LOOP('',(#35947,#35953,#35954,#35955)); +#35947 = ORIENTED_EDGE('',*,*,#35948,.T.); +#35948 = EDGE_CURVE('',#34600,#34673,#35949,.T.); +#35949 = LINE('',#35950,#35951); +#35950 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#35951 = VECTOR('',#35952,1.); +#35952 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35953 = ORIENTED_EDGE('',*,*,#34680,.T.); +#35954 = ORIENTED_EDGE('',*,*,#34631,.F.); +#35955 = ORIENTED_EDGE('',*,*,#34607,.F.); +#35956 = PLANE('',#35957); +#35957 = AXIS2_PLACEMENT_3D('',#35958,#35959,#35960); +#35958 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#35959 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#35960 = DIRECTION('',(0.,0.,1.)); +#35961 = ADVANCED_FACE('',(#35962),#35973,.T.); +#35962 = FACE_BOUND('',#35963,.T.); +#35963 = EDGE_LOOP('',(#35964,#35970,#35971,#35972)); +#35964 = ORIENTED_EDGE('',*,*,#35965,.T.); +#35965 = EDGE_CURVE('',#34592,#34665,#35966,.T.); +#35966 = LINE('',#35967,#35968); +#35967 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#35968 = VECTOR('',#35969,1.); +#35969 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35970 = ORIENTED_EDGE('',*,*,#34672,.T.); +#35971 = ORIENTED_EDGE('',*,*,#35948,.F.); +#35972 = ORIENTED_EDGE('',*,*,#34599,.F.); +#35973 = PLANE('',#35974); +#35974 = AXIS2_PLACEMENT_3D('',#35975,#35976,#35977); +#35975 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#35976 = DIRECTION('',(0.,0.,1.)); +#35977 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#35978 = ADVANCED_FACE('',(#35979),#35985,.T.); +#35979 = FACE_BOUND('',#35980,.T.); +#35980 = EDGE_LOOP('',(#35981,#35982,#35983,#35984)); +#35981 = ORIENTED_EDGE('',*,*,#34699,.T.); +#35982 = ORIENTED_EDGE('',*,*,#34664,.T.); +#35983 = ORIENTED_EDGE('',*,*,#35965,.F.); +#35984 = ORIENTED_EDGE('',*,*,#34591,.F.); +#35985 = PLANE('',#35986); +#35986 = AXIS2_PLACEMENT_3D('',#35987,#35988,#35989); +#35987 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#35988 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35989 = DIRECTION('',(0.,0.,-1.)); +#35990 = ADVANCED_FACE('',(#35991),#36002,.T.); +#35991 = FACE_BOUND('',#35992,.T.); +#35992 = EDGE_LOOP('',(#35993,#35999,#36000,#36001)); +#35993 = ORIENTED_EDGE('',*,*,#35994,.T.); +#35994 = EDGE_CURVE('',#34766,#34839,#35995,.T.); +#35995 = LINE('',#35996,#35997); +#35996 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#35997 = VECTOR('',#35998,1.); +#35998 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#35999 = ORIENTED_EDGE('',*,*,#34846,.T.); +#36000 = ORIENTED_EDGE('',*,*,#34797,.F.); +#36001 = ORIENTED_EDGE('',*,*,#34773,.F.); +#36002 = PLANE('',#36003); +#36003 = AXIS2_PLACEMENT_3D('',#36004,#36005,#36006); +#36004 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#36005 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#36006 = DIRECTION('',(0.,0.,1.)); +#36007 = ADVANCED_FACE('',(#36008),#36019,.T.); +#36008 = FACE_BOUND('',#36009,.T.); +#36009 = EDGE_LOOP('',(#36010,#36016,#36017,#36018)); +#36010 = ORIENTED_EDGE('',*,*,#36011,.T.); +#36011 = EDGE_CURVE('',#34758,#34831,#36012,.T.); +#36012 = LINE('',#36013,#36014); +#36013 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#36014 = VECTOR('',#36015,1.); +#36015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36016 = ORIENTED_EDGE('',*,*,#34838,.T.); +#36017 = ORIENTED_EDGE('',*,*,#35994,.F.); +#36018 = ORIENTED_EDGE('',*,*,#34765,.F.); +#36019 = PLANE('',#36020); +#36020 = AXIS2_PLACEMENT_3D('',#36021,#36022,#36023); +#36021 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#36022 = DIRECTION('',(0.,0.,1.)); +#36023 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#36024 = ADVANCED_FACE('',(#36025),#36031,.T.); +#36025 = FACE_BOUND('',#36026,.T.); +#36026 = EDGE_LOOP('',(#36027,#36028,#36029,#36030)); +#36027 = ORIENTED_EDGE('',*,*,#34865,.T.); +#36028 = ORIENTED_EDGE('',*,*,#34830,.T.); +#36029 = ORIENTED_EDGE('',*,*,#36011,.F.); +#36030 = ORIENTED_EDGE('',*,*,#34757,.F.); +#36031 = PLANE('',#36032); +#36032 = AXIS2_PLACEMENT_3D('',#36033,#36034,#36035); +#36033 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#36034 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#36035 = DIRECTION('',(0.,0.,-1.)); +#36036 = ADVANCED_FACE('',(#36037),#36048,.T.); +#36037 = FACE_BOUND('',#36038,.T.); +#36038 = EDGE_LOOP('',(#36039,#36045,#36046,#36047)); +#36039 = ORIENTED_EDGE('',*,*,#36040,.T.); +#36040 = EDGE_CURVE('',#34932,#35005,#36041,.T.); +#36041 = LINE('',#36042,#36043); +#36042 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#36043 = VECTOR('',#36044,1.); +#36044 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36045 = ORIENTED_EDGE('',*,*,#35012,.T.); +#36046 = ORIENTED_EDGE('',*,*,#34963,.F.); +#36047 = ORIENTED_EDGE('',*,*,#34939,.F.); +#36048 = PLANE('',#36049); +#36049 = AXIS2_PLACEMENT_3D('',#36050,#36051,#36052); +#36050 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#36051 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#36052 = DIRECTION('',(0.,0.,1.)); +#36053 = ADVANCED_FACE('',(#36054),#36065,.T.); +#36054 = FACE_BOUND('',#36055,.T.); +#36055 = EDGE_LOOP('',(#36056,#36062,#36063,#36064)); +#36056 = ORIENTED_EDGE('',*,*,#36057,.T.); +#36057 = EDGE_CURVE('',#34924,#34997,#36058,.T.); +#36058 = LINE('',#36059,#36060); +#36059 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#36060 = VECTOR('',#36061,1.); +#36061 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36062 = ORIENTED_EDGE('',*,*,#35004,.T.); +#36063 = ORIENTED_EDGE('',*,*,#36040,.F.); +#36064 = ORIENTED_EDGE('',*,*,#34931,.F.); +#36065 = PLANE('',#36066); +#36066 = AXIS2_PLACEMENT_3D('',#36067,#36068,#36069); +#36067 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#36068 = DIRECTION('',(0.,0.,1.)); +#36069 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#36070 = ADVANCED_FACE('',(#36071),#36077,.T.); +#36071 = FACE_BOUND('',#36072,.T.); +#36072 = EDGE_LOOP('',(#36073,#36074,#36075,#36076)); +#36073 = ORIENTED_EDGE('',*,*,#35031,.T.); +#36074 = ORIENTED_EDGE('',*,*,#34996,.T.); +#36075 = ORIENTED_EDGE('',*,*,#36057,.F.); +#36076 = ORIENTED_EDGE('',*,*,#34923,.F.); +#36077 = PLANE('',#36078); +#36078 = AXIS2_PLACEMENT_3D('',#36079,#36080,#36081); +#36079 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#36080 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#36081 = DIRECTION('',(0.,0.,-1.)); +#36082 = ADVANCED_FACE('',(#36083),#36094,.T.); +#36083 = FACE_BOUND('',#36084,.T.); +#36084 = EDGE_LOOP('',(#36085,#36091,#36092,#36093)); +#36085 = ORIENTED_EDGE('',*,*,#36086,.T.); +#36086 = EDGE_CURVE('',#35098,#35171,#36087,.T.); +#36087 = LINE('',#36088,#36089); +#36088 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#36089 = VECTOR('',#36090,1.); +#36090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36091 = ORIENTED_EDGE('',*,*,#35178,.T.); +#36092 = ORIENTED_EDGE('',*,*,#35129,.F.); +#36093 = ORIENTED_EDGE('',*,*,#35105,.F.); +#36094 = PLANE('',#36095); +#36095 = AXIS2_PLACEMENT_3D('',#36096,#36097,#36098); +#36096 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#36097 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#36098 = DIRECTION('',(0.,0.,1.)); +#36099 = ADVANCED_FACE('',(#36100),#36111,.T.); +#36100 = FACE_BOUND('',#36101,.T.); +#36101 = EDGE_LOOP('',(#36102,#36108,#36109,#36110)); +#36102 = ORIENTED_EDGE('',*,*,#36103,.T.); +#36103 = EDGE_CURVE('',#35090,#35163,#36104,.T.); +#36104 = LINE('',#36105,#36106); +#36105 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#36106 = VECTOR('',#36107,1.); +#36107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#36108 = ORIENTED_EDGE('',*,*,#35170,.T.); +#36109 = ORIENTED_EDGE('',*,*,#36086,.F.); +#36110 = ORIENTED_EDGE('',*,*,#35097,.F.); +#36111 = PLANE('',#36112); +#36112 = AXIS2_PLACEMENT_3D('',#36113,#36114,#36115); +#36113 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#36114 = DIRECTION('',(0.,0.,1.)); +#36115 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#36116 = ADVANCED_FACE('',(#36117),#36123,.T.); +#36117 = FACE_BOUND('',#36118,.T.); +#36118 = EDGE_LOOP('',(#36119,#36120,#36121,#36122)); +#36119 = ORIENTED_EDGE('',*,*,#35197,.T.); +#36120 = ORIENTED_EDGE('',*,*,#35162,.T.); +#36121 = ORIENTED_EDGE('',*,*,#36103,.F.); +#36122 = ORIENTED_EDGE('',*,*,#35089,.F.); +#36123 = PLANE('',#36124); +#36124 = AXIS2_PLACEMENT_3D('',#36125,#36126,#36127); +#36125 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#36126 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#36127 = DIRECTION('',(0.,0.,-1.)); +#36128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#36132)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#36129,#36130,#36131)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#36129 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#36130 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#36131 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#36132 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#36129, + 'distance_accuracy_value','confusion accuracy'); +#36133 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36134,#36136); +#36134 = ( REPRESENTATION_RELATIONSHIP('','',#20325,#20302) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36135) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36135 = ITEM_DEFINED_TRANSFORMATION('','',#11,#20303); +#36136 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36137); +#36137 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('21','=>[0:1:1:19]','',#20297, + #20320,$); +#36138 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20322)); +#36139 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36140,#36142); +#36140 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36141) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36141 = ITEM_DEFINED_TRANSFORMATION('','',#11,#67); +#36142 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36143); +#36143 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('23','Ccomp2','',#5,#14742,$); +#36144 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36145,#36147); +#36145 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36146) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36146 = ITEM_DEFINED_TRANSFORMATION('','',#11,#71); +#36147 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36148); +#36148 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('24','R5','',#5,#523,$); +#36149 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36150,#36152); +#36150 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36151) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36151 = ITEM_DEFINED_TRANSFORMATION('','',#11,#75); +#36152 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36153); +#36153 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('25','P11','',#5,#11985,$); +#36154 = SHAPE_DEFINITION_REPRESENTATION(#36155,#36161); +#36155 = PRODUCT_DEFINITION_SHAPE('','',#36156); +#36156 = PRODUCT_DEFINITION('design','',#36157,#36160); +#36157 = PRODUCT_DEFINITION_FORMATION('','',#36158); +#36158 = PRODUCT('SOT-23','SOT-23','',(#36159)); +#36159 = PRODUCT_CONTEXT('',#2,'mechanical'); +#36160 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#36161 = SHAPE_REPRESENTATION('',(#11,#36162),#36166); +#36162 = AXIS2_PLACEMENT_3D('',#36163,#36164,#36165); +#36163 = CARTESIAN_POINT('',(0.,0.,0.)); +#36164 = DIRECTION('',(0.,0.,1.)); +#36165 = DIRECTION('',(1.,0.,-0.)); +#36166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#36170)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#36167,#36168,#36169)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#36167 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#36168 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#36169 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#36170 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#36167, + 'distance_accuracy_value','confusion accuracy'); +#36171 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#36172,#36174); +#36172 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#36173) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#36173 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79); +#36174 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #36175); +#36175 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','Q1','',#5,#36156,$); +#36176 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#36158)); +#36177 = SHAPE_DEFINITION_REPRESENTATION(#36178,#36184); +#36178 = PRODUCT_DEFINITION_SHAPE('','',#36179); +#36179 = PRODUCT_DEFINITION('design','',#36180,#36183); +#36180 = PRODUCT_DEFINITION_FORMATION('','',#36181); +#36181 = PRODUCT('SOT-23','SOT-23','',(#36182)); +#36182 = PRODUCT_CONTEXT('',#2,'mechanical'); +#36183 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#36184 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#36185),#38167); +#36185 = MANIFOLD_SOLID_BREP('',#36186); +#36186 = CLOSED_SHELL('',(#36187,#36225,#36288,#36311,#36340,#36363, + #36418,#36457,#36480,#36503,#36520,#36543,#36631,#36647,#36677, + #36710,#36741,#36774,#36791,#36808,#36841,#36871,#36894,#36917, + #36934,#36963,#37017,#37040,#37063,#37086,#37125,#37147,#37191, + #37266,#37290,#37358,#37375,#37450,#37474,#37542,#37617,#37641, + #37709,#37726,#37743,#37789,#37805,#37821,#37838,#37850,#37867, + #37884,#37901,#37918,#37935,#37952,#37964,#37981,#37998,#38015, + #38032,#38049,#38061,#38078,#38095,#38112,#38129,#38146,#38158)); +#36187 = ADVANCED_FACE('',(#36188),#36220,.F.); +#36188 = FACE_BOUND('',#36189,.F.); +#36189 = EDGE_LOOP('',(#36190,#36200,#36207,#36215)); +#36190 = ORIENTED_EDGE('',*,*,#36191,.T.); +#36191 = EDGE_CURVE('',#36192,#36194,#36196,.T.); +#36192 = VERTEX_POINT('',#36193); +#36193 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36194 = VERTEX_POINT('',#36195); +#36195 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36196 = LINE('',#36197,#36198); +#36197 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36198 = VECTOR('',#36199,1.); +#36199 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36200 = ORIENTED_EDGE('',*,*,#36201,.T.); +#36201 = EDGE_CURVE('',#36194,#36202,#36204,.T.); +#36202 = VERTEX_POINT('',#36203); +#36203 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36204 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36205,#36206),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36205 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36206 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36207 = ORIENTED_EDGE('',*,*,#36208,.F.); +#36208 = EDGE_CURVE('',#36209,#36202,#36211,.T.); +#36209 = VERTEX_POINT('',#36210); +#36210 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36211 = LINE('',#36212,#36213); +#36212 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36213 = VECTOR('',#36214,1.); +#36214 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36215 = ORIENTED_EDGE('',*,*,#36216,.F.); +#36216 = EDGE_CURVE('',#36192,#36209,#36217,.T.); +#36217 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36218,#36219),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36218 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36219 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36220 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36221,#36222) + ,(#36223,#36224 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36221 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36222 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36223 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36224 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36225 = ADVANCED_FACE('',(#36226),#36283,.T.); +#36226 = FACE_BOUND('',#36227,.T.); +#36227 = EDGE_LOOP('',(#36228,#36229,#36237,#36245,#36253,#36261,#36269, + #36277)); +#36228 = ORIENTED_EDGE('',*,*,#36191,.T.); +#36229 = ORIENTED_EDGE('',*,*,#36230,.T.); +#36230 = EDGE_CURVE('',#36194,#36231,#36233,.T.); +#36231 = VERTEX_POINT('',#36232); +#36232 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36233 = LINE('',#36234,#36235); +#36234 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36235 = VECTOR('',#36236,1.); +#36236 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36237 = ORIENTED_EDGE('',*,*,#36238,.T.); +#36238 = EDGE_CURVE('',#36231,#36239,#36241,.T.); +#36239 = VERTEX_POINT('',#36240); +#36240 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36241 = LINE('',#36242,#36243); +#36242 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36243 = VECTOR('',#36244,1.); +#36244 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36245 = ORIENTED_EDGE('',*,*,#36246,.T.); +#36246 = EDGE_CURVE('',#36239,#36247,#36249,.T.); +#36247 = VERTEX_POINT('',#36248); +#36248 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36249 = LINE('',#36250,#36251); +#36250 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36251 = VECTOR('',#36252,1.); +#36252 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36253 = ORIENTED_EDGE('',*,*,#36254,.T.); +#36254 = EDGE_CURVE('',#36247,#36255,#36257,.T.); +#36255 = VERTEX_POINT('',#36256); +#36256 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36257 = LINE('',#36258,#36259); +#36258 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36259 = VECTOR('',#36260,1.); +#36260 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36261 = ORIENTED_EDGE('',*,*,#36262,.T.); +#36262 = EDGE_CURVE('',#36255,#36263,#36265,.T.); +#36263 = VERTEX_POINT('',#36264); +#36264 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36265 = LINE('',#36266,#36267); +#36266 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36267 = VECTOR('',#36268,1.); +#36268 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36269 = ORIENTED_EDGE('',*,*,#36270,.T.); +#36270 = EDGE_CURVE('',#36263,#36271,#36273,.T.); +#36271 = VERTEX_POINT('',#36272); +#36272 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36273 = LINE('',#36274,#36275); +#36274 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36275 = VECTOR('',#36276,1.); +#36276 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36277 = ORIENTED_EDGE('',*,*,#36278,.T.); +#36278 = EDGE_CURVE('',#36271,#36192,#36279,.T.); +#36279 = LINE('',#36280,#36281); +#36280 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36281 = VECTOR('',#36282,1.); +#36282 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36283 = PLANE('',#36284); +#36284 = AXIS2_PLACEMENT_3D('',#36285,#36286,#36287); +#36285 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36286 = DIRECTION('',(0.,0.,-1.)); +#36287 = DIRECTION('',(0.370454302632,-0.928850692879,0.)); +#36288 = ADVANCED_FACE('',(#36289),#36306,.F.); +#36289 = FACE_BOUND('',#36290,.F.); +#36290 = EDGE_LOOP('',(#36291,#36292,#36299,#36305)); +#36291 = ORIENTED_EDGE('',*,*,#36230,.T.); +#36292 = ORIENTED_EDGE('',*,*,#36293,.T.); +#36293 = EDGE_CURVE('',#36231,#36294,#36296,.T.); +#36294 = VERTEX_POINT('',#36295); +#36295 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36296 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36297,#36298),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36297 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36298 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36299 = ORIENTED_EDGE('',*,*,#36300,.F.); +#36300 = EDGE_CURVE('',#36202,#36294,#36301,.T.); +#36301 = LINE('',#36302,#36303); +#36302 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36303 = VECTOR('',#36304,1.); +#36304 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36305 = ORIENTED_EDGE('',*,*,#36201,.F.); +#36306 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36307,#36308) + ,(#36309,#36310 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36307 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#36308 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36309 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36310 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36311 = ADVANCED_FACE('',(#36312),#36335,.F.); +#36312 = FACE_BOUND('',#36313,.F.); +#36313 = EDGE_LOOP('',(#36314,#36315,#36322,#36330)); +#36314 = ORIENTED_EDGE('',*,*,#36208,.T.); +#36315 = ORIENTED_EDGE('',*,*,#36316,.T.); +#36316 = EDGE_CURVE('',#36202,#36317,#36319,.T.); +#36317 = VERTEX_POINT('',#36318); +#36318 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36319 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36320,#36321),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36320 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#36321 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36322 = ORIENTED_EDGE('',*,*,#36323,.F.); +#36323 = EDGE_CURVE('',#36324,#36317,#36326,.T.); +#36324 = VERTEX_POINT('',#36325); +#36325 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36326 = LINE('',#36327,#36328); +#36327 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36328 = VECTOR('',#36329,1.); +#36329 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36330 = ORIENTED_EDGE('',*,*,#36331,.F.); +#36331 = EDGE_CURVE('',#36209,#36324,#36332,.T.); +#36332 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36333,#36334),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36333 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36334 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36335 = PLANE('',#36336); +#36336 = AXIS2_PLACEMENT_3D('',#36337,#36338,#36339); +#36337 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#36338 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36339 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36340 = ADVANCED_FACE('',(#36341),#36358,.F.); +#36341 = FACE_BOUND('',#36342,.F.); +#36342 = EDGE_LOOP('',(#36343,#36344,#36345,#36353)); +#36343 = ORIENTED_EDGE('',*,*,#36278,.T.); +#36344 = ORIENTED_EDGE('',*,*,#36216,.T.); +#36345 = ORIENTED_EDGE('',*,*,#36346,.F.); +#36346 = EDGE_CURVE('',#36347,#36209,#36349,.T.); +#36347 = VERTEX_POINT('',#36348); +#36348 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36349 = LINE('',#36350,#36351); +#36350 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36351 = VECTOR('',#36352,1.); +#36352 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36353 = ORIENTED_EDGE('',*,*,#36354,.F.); +#36354 = EDGE_CURVE('',#36271,#36347,#36355,.T.); +#36355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36356,#36357),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36356 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36357 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36358 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36359,#36360) + ,(#36361,#36362 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36359 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36360 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36361 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#36362 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#36363 = ADVANCED_FACE('',(#36364),#36413,.F.); +#36364 = FACE_BOUND('',#36365,.F.); +#36365 = EDGE_LOOP('',(#36366,#36367,#36368,#36376,#36384,#36392,#36400, + #36408)); +#36366 = ORIENTED_EDGE('',*,*,#36270,.T.); +#36367 = ORIENTED_EDGE('',*,*,#36354,.T.); +#36368 = ORIENTED_EDGE('',*,*,#36369,.F.); +#36369 = EDGE_CURVE('',#36370,#36347,#36372,.T.); +#36370 = VERTEX_POINT('',#36371); +#36371 = CARTESIAN_POINT('',(-0.7,1.15,0.575)); +#36372 = LINE('',#36373,#36374); +#36373 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36374 = VECTOR('',#36375,1.); +#36375 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36376 = ORIENTED_EDGE('',*,*,#36377,.F.); +#36377 = EDGE_CURVE('',#36378,#36370,#36380,.T.); +#36378 = VERTEX_POINT('',#36379); +#36379 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#36380 = LINE('',#36381,#36382); +#36381 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#36382 = VECTOR('',#36383,1.); +#36383 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36384 = ORIENTED_EDGE('',*,*,#36385,.F.); +#36385 = EDGE_CURVE('',#36386,#36378,#36388,.T.); +#36386 = VERTEX_POINT('',#36387); +#36387 = CARTESIAN_POINT('',(-0.7,-0.75,0.575)); +#36388 = LINE('',#36389,#36390); +#36389 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36390 = VECTOR('',#36391,1.); +#36391 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36392 = ORIENTED_EDGE('',*,*,#36393,.F.); +#36393 = EDGE_CURVE('',#36394,#36386,#36396,.T.); +#36394 = VERTEX_POINT('',#36395); +#36395 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#36396 = LINE('',#36397,#36398); +#36397 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#36398 = VECTOR('',#36399,1.); +#36399 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36400 = ORIENTED_EDGE('',*,*,#36401,.F.); +#36401 = EDGE_CURVE('',#36402,#36394,#36404,.T.); +#36402 = VERTEX_POINT('',#36403); +#36403 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36404 = LINE('',#36405,#36406); +#36405 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36406 = VECTOR('',#36407,1.); +#36407 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36408 = ORIENTED_EDGE('',*,*,#36409,.F.); +#36409 = EDGE_CURVE('',#36263,#36402,#36410,.T.); +#36410 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36411,#36412),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36411 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36412 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36413 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36414,#36415) + ,(#36416,#36417 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36414 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36415 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36416 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#36417 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36418 = ADVANCED_FACE('',(#36419),#36452,.F.); +#36419 = FACE_BOUND('',#36420,.F.); +#36420 = EDGE_LOOP('',(#36421,#36422,#36429,#36437,#36445,#36451)); +#36421 = ORIENTED_EDGE('',*,*,#36238,.T.); +#36422 = ORIENTED_EDGE('',*,*,#36423,.T.); +#36423 = EDGE_CURVE('',#36239,#36424,#36426,.T.); +#36424 = VERTEX_POINT('',#36425); +#36425 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36426 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36427,#36428),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36427 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36428 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36429 = ORIENTED_EDGE('',*,*,#36430,.F.); +#36430 = EDGE_CURVE('',#36431,#36424,#36433,.T.); +#36431 = VERTEX_POINT('',#36432); +#36432 = CARTESIAN_POINT('',(0.7,-0.2,0.575)); +#36433 = LINE('',#36434,#36435); +#36434 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36435 = VECTOR('',#36436,1.); +#36436 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36437 = ORIENTED_EDGE('',*,*,#36438,.F.); +#36438 = EDGE_CURVE('',#36439,#36431,#36441,.T.); +#36439 = VERTEX_POINT('',#36440); +#36440 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#36441 = LINE('',#36442,#36443); +#36442 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#36443 = VECTOR('',#36444,1.); +#36444 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36445 = ORIENTED_EDGE('',*,*,#36446,.F.); +#36446 = EDGE_CURVE('',#36294,#36439,#36447,.T.); +#36447 = LINE('',#36448,#36449); +#36448 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36449 = VECTOR('',#36450,1.); +#36450 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36451 = ORIENTED_EDGE('',*,*,#36293,.F.); +#36452 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36453,#36454) + ,(#36455,#36456 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36453 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#36454 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36455 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36456 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36457 = ADVANCED_FACE('',(#36458),#36475,.F.); +#36458 = FACE_BOUND('',#36459,.F.); +#36459 = EDGE_LOOP('',(#36460,#36461,#36462,#36470)); +#36460 = ORIENTED_EDGE('',*,*,#36262,.T.); +#36461 = ORIENTED_EDGE('',*,*,#36409,.T.); +#36462 = ORIENTED_EDGE('',*,*,#36463,.F.); +#36463 = EDGE_CURVE('',#36464,#36402,#36466,.T.); +#36464 = VERTEX_POINT('',#36465); +#36465 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36466 = LINE('',#36467,#36468); +#36467 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36468 = VECTOR('',#36469,1.); +#36469 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36470 = ORIENTED_EDGE('',*,*,#36471,.F.); +#36471 = EDGE_CURVE('',#36255,#36464,#36472,.T.); +#36472 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36473,#36474),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36473 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36474 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36475 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36476,#36477) + ,(#36478,#36479 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36476 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36477 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36478 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#36479 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36480 = ADVANCED_FACE('',(#36481),#36498,.F.); +#36481 = FACE_BOUND('',#36482,.F.); +#36482 = EDGE_LOOP('',(#36483,#36484,#36491,#36497)); +#36483 = ORIENTED_EDGE('',*,*,#36246,.T.); +#36484 = ORIENTED_EDGE('',*,*,#36485,.T.); +#36485 = EDGE_CURVE('',#36247,#36486,#36488,.T.); +#36486 = VERTEX_POINT('',#36487); +#36487 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36489,#36490),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36489 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36490 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36491 = ORIENTED_EDGE('',*,*,#36492,.F.); +#36492 = EDGE_CURVE('',#36424,#36486,#36493,.T.); +#36493 = LINE('',#36494,#36495); +#36494 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36495 = VECTOR('',#36496,1.); +#36496 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36497 = ORIENTED_EDGE('',*,*,#36423,.F.); +#36498 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36499,#36500) + ,(#36501,#36502 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36499 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#36500 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36501 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36502 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36503 = ADVANCED_FACE('',(#36504),#36515,.F.); +#36504 = FACE_BOUND('',#36505,.F.); +#36505 = EDGE_LOOP('',(#36506,#36507,#36508,#36514)); +#36506 = ORIENTED_EDGE('',*,*,#36254,.T.); +#36507 = ORIENTED_EDGE('',*,*,#36471,.T.); +#36508 = ORIENTED_EDGE('',*,*,#36509,.F.); +#36509 = EDGE_CURVE('',#36486,#36464,#36510,.T.); +#36510 = LINE('',#36511,#36512); +#36511 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36512 = VECTOR('',#36513,1.); +#36513 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36514 = ORIENTED_EDGE('',*,*,#36485,.F.); +#36515 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36516,#36517) + ,(#36518,#36519 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36516 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#36517 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36518 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#36519 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36520 = ADVANCED_FACE('',(#36521),#36538,.F.); +#36521 = FACE_BOUND('',#36522,.F.); +#36522 = EDGE_LOOP('',(#36523,#36524,#36531,#36537)); +#36523 = ORIENTED_EDGE('',*,*,#36300,.T.); +#36524 = ORIENTED_EDGE('',*,*,#36525,.T.); +#36525 = EDGE_CURVE('',#36294,#36526,#36528,.T.); +#36526 = VERTEX_POINT('',#36527); +#36527 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36528 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36529,#36530),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36529 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#36530 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36531 = ORIENTED_EDGE('',*,*,#36532,.F.); +#36532 = EDGE_CURVE('',#36317,#36526,#36533,.T.); +#36533 = LINE('',#36534,#36535); +#36534 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36535 = VECTOR('',#36536,1.); +#36536 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36537 = ORIENTED_EDGE('',*,*,#36316,.F.); +#36538 = PLANE('',#36539); +#36539 = AXIS2_PLACEMENT_3D('',#36540,#36541,#36542); +#36540 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#36541 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36542 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36543 = ADVANCED_FACE('',(#36544),#36626,.F.); +#36544 = FACE_BOUND('',#36545,.F.); +#36545 = EDGE_LOOP('',(#36546,#36554,#36555,#36556,#36564,#36572,#36580, + #36588,#36596,#36604,#36612,#36620)); +#36546 = ORIENTED_EDGE('',*,*,#36547,.T.); +#36547 = EDGE_CURVE('',#36548,#36324,#36550,.T.); +#36548 = VERTEX_POINT('',#36549); +#36549 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36550 = LINE('',#36551,#36552); +#36551 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36552 = VECTOR('',#36553,1.); +#36553 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36554 = ORIENTED_EDGE('',*,*,#36323,.T.); +#36555 = ORIENTED_EDGE('',*,*,#36532,.T.); +#36556 = ORIENTED_EDGE('',*,*,#36557,.T.); +#36557 = EDGE_CURVE('',#36526,#36558,#36560,.T.); +#36558 = VERTEX_POINT('',#36559); +#36559 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#36560 = LINE('',#36561,#36562); +#36561 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36562 = VECTOR('',#36563,1.); +#36563 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36564 = ORIENTED_EDGE('',*,*,#36565,.T.); +#36565 = EDGE_CURVE('',#36558,#36566,#36568,.T.); +#36566 = VERTEX_POINT('',#36567); +#36567 = CARTESIAN_POINT('',(0.675,0.2,0.725)); +#36568 = LINE('',#36569,#36570); +#36569 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#36570 = VECTOR('',#36571,1.); +#36571 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36572 = ORIENTED_EDGE('',*,*,#36573,.F.); +#36573 = EDGE_CURVE('',#36574,#36566,#36576,.T.); +#36574 = VERTEX_POINT('',#36575); +#36575 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#36576 = LINE('',#36577,#36578); +#36577 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#36578 = VECTOR('',#36579,1.); +#36579 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36580 = ORIENTED_EDGE('',*,*,#36581,.F.); +#36581 = EDGE_CURVE('',#36582,#36574,#36584,.T.); +#36582 = VERTEX_POINT('',#36583); +#36583 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#36584 = LINE('',#36585,#36586); +#36585 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#36586 = VECTOR('',#36587,1.); +#36587 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36588 = ORIENTED_EDGE('',*,*,#36589,.F.); +#36589 = EDGE_CURVE('',#36590,#36582,#36592,.T.); +#36590 = VERTEX_POINT('',#36591); +#36591 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#36592 = LINE('',#36593,#36594); +#36593 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#36594 = VECTOR('',#36595,1.); +#36595 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36596 = ORIENTED_EDGE('',*,*,#36597,.F.); +#36597 = EDGE_CURVE('',#36598,#36590,#36600,.T.); +#36598 = VERTEX_POINT('',#36599); +#36599 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#36600 = LINE('',#36601,#36602); +#36601 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#36602 = VECTOR('',#36603,1.); +#36603 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36604 = ORIENTED_EDGE('',*,*,#36605,.F.); +#36605 = EDGE_CURVE('',#36606,#36598,#36608,.T.); +#36606 = VERTEX_POINT('',#36607); +#36607 = CARTESIAN_POINT('',(-0.675,1.15,0.725)); +#36608 = LINE('',#36609,#36610); +#36609 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36610 = VECTOR('',#36611,1.); +#36611 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36612 = ORIENTED_EDGE('',*,*,#36613,.F.); +#36613 = EDGE_CURVE('',#36614,#36606,#36616,.T.); +#36614 = VERTEX_POINT('',#36615); +#36615 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#36616 = LINE('',#36617,#36618); +#36617 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#36618 = VECTOR('',#36619,1.); +#36619 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#36620 = ORIENTED_EDGE('',*,*,#36621,.T.); +#36621 = EDGE_CURVE('',#36614,#36548,#36622,.T.); +#36622 = LINE('',#36623,#36624); +#36623 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36624 = VECTOR('',#36625,1.); +#36625 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36626 = PLANE('',#36627); +#36627 = AXIS2_PLACEMENT_3D('',#36628,#36629,#36630); +#36628 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#36629 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#36630 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#36631 = ADVANCED_FACE('',(#36632),#36642,.F.); +#36632 = FACE_BOUND('',#36633,.F.); +#36633 = EDGE_LOOP('',(#36634,#36635,#36636,#36637)); +#36634 = ORIENTED_EDGE('',*,*,#36346,.T.); +#36635 = ORIENTED_EDGE('',*,*,#36331,.T.); +#36636 = ORIENTED_EDGE('',*,*,#36547,.F.); +#36637 = ORIENTED_EDGE('',*,*,#36638,.F.); +#36638 = EDGE_CURVE('',#36347,#36548,#36639,.T.); +#36639 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36640,#36641),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36640 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#36641 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36642 = PLANE('',#36643); +#36643 = AXIS2_PLACEMENT_3D('',#36644,#36645,#36646); +#36644 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#36645 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#36646 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36647 = ADVANCED_FACE('',(#36648),#36672,.F.); +#36648 = FACE_BOUND('',#36649,.F.); +#36649 = EDGE_LOOP('',(#36650,#36657,#36658,#36666)); +#36650 = ORIENTED_EDGE('',*,*,#36651,.F.); +#36651 = EDGE_CURVE('',#36402,#36652,#36654,.T.); +#36652 = VERTEX_POINT('',#36653); +#36653 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36654 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36655,#36656),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36655 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#36656 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36657 = ORIENTED_EDGE('',*,*,#36401,.T.); +#36658 = ORIENTED_EDGE('',*,*,#36659,.T.); +#36659 = EDGE_CURVE('',#36394,#36660,#36662,.T.); +#36660 = VERTEX_POINT('',#36661); +#36661 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#36662 = LINE('',#36663,#36664); +#36663 = CARTESIAN_POINT('',(-0.7,-1.15,0.529763586955)); +#36664 = VECTOR('',#36665,1.); +#36665 = DIRECTION('',(0.,0.,1.)); +#36666 = ORIENTED_EDGE('',*,*,#36667,.F.); +#36667 = EDGE_CURVE('',#36652,#36660,#36668,.T.); +#36668 = LINE('',#36669,#36670); +#36669 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36670 = VECTOR('',#36671,1.); +#36671 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36672 = PLANE('',#36673); +#36673 = AXIS2_PLACEMENT_3D('',#36674,#36675,#36676); +#36674 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36675 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36676 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36677 = ADVANCED_FACE('',(#36678),#36705,.F.); +#36678 = FACE_BOUND('',#36679,.F.); +#36679 = EDGE_LOOP('',(#36680,#36681,#36690,#36698)); +#36680 = ORIENTED_EDGE('',*,*,#36393,.T.); +#36681 = ORIENTED_EDGE('',*,*,#36682,.T.); +#36682 = EDGE_CURVE('',#36386,#36683,#36685,.T.); +#36683 = VERTEX_POINT('',#36684); +#36684 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#36685 = CIRCLE('',#36686,0.1); +#36686 = AXIS2_PLACEMENT_3D('',#36687,#36688,#36689); +#36687 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#36688 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36689 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36690 = ORIENTED_EDGE('',*,*,#36691,.F.); +#36691 = EDGE_CURVE('',#36692,#36683,#36694,.T.); +#36692 = VERTEX_POINT('',#36693); +#36693 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#36694 = LINE('',#36695,#36696); +#36695 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#36696 = VECTOR('',#36697,1.); +#36697 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36698 = ORIENTED_EDGE('',*,*,#36699,.F.); +#36699 = EDGE_CURVE('',#36394,#36692,#36700,.T.); +#36700 = CIRCLE('',#36701,0.1); +#36701 = AXIS2_PLACEMENT_3D('',#36702,#36703,#36704); +#36702 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#36703 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36704 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36705 = CYLINDRICAL_SURFACE('',#36706,0.1); +#36706 = AXIS2_PLACEMENT_3D('',#36707,#36708,#36709); +#36707 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#36708 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#36709 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36710 = ADVANCED_FACE('',(#36711),#36736,.F.); +#36711 = FACE_BOUND('',#36712,.F.); +#36712 = EDGE_LOOP('',(#36713,#36721,#36722,#36730)); +#36713 = ORIENTED_EDGE('',*,*,#36714,.F.); +#36714 = EDGE_CURVE('',#36386,#36715,#36717,.T.); +#36715 = VERTEX_POINT('',#36716); +#36716 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#36717 = LINE('',#36718,#36719); +#36718 = CARTESIAN_POINT('',(-0.7,-0.75,0.529763586955)); +#36719 = VECTOR('',#36720,1.); +#36720 = DIRECTION('',(0.,0.,1.)); +#36721 = ORIENTED_EDGE('',*,*,#36385,.T.); +#36722 = ORIENTED_EDGE('',*,*,#36723,.T.); +#36723 = EDGE_CURVE('',#36378,#36724,#36726,.T.); +#36724 = VERTEX_POINT('',#36725); +#36725 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36726 = LINE('',#36727,#36728); +#36727 = CARTESIAN_POINT('',(-0.7,0.75,0.529763586955)); +#36728 = VECTOR('',#36729,1.); +#36729 = DIRECTION('',(0.,0.,1.)); +#36730 = ORIENTED_EDGE('',*,*,#36731,.F.); +#36731 = EDGE_CURVE('',#36715,#36724,#36732,.T.); +#36732 = LINE('',#36733,#36734); +#36733 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36734 = VECTOR('',#36735,1.); +#36735 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36736 = PLANE('',#36737); +#36737 = AXIS2_PLACEMENT_3D('',#36738,#36739,#36740); +#36738 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36739 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36740 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36741 = ADVANCED_FACE('',(#36742),#36769,.F.); +#36742 = FACE_BOUND('',#36743,.F.); +#36743 = EDGE_LOOP('',(#36744,#36745,#36754,#36762)); +#36744 = ORIENTED_EDGE('',*,*,#36377,.T.); +#36745 = ORIENTED_EDGE('',*,*,#36746,.T.); +#36746 = EDGE_CURVE('',#36370,#36747,#36749,.T.); +#36747 = VERTEX_POINT('',#36748); +#36748 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#36749 = CIRCLE('',#36750,0.1); +#36750 = AXIS2_PLACEMENT_3D('',#36751,#36752,#36753); +#36751 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#36752 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36753 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36754 = ORIENTED_EDGE('',*,*,#36755,.F.); +#36755 = EDGE_CURVE('',#36756,#36747,#36758,.T.); +#36756 = VERTEX_POINT('',#36757); +#36757 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#36758 = LINE('',#36759,#36760); +#36759 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#36760 = VECTOR('',#36761,1.); +#36761 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36762 = ORIENTED_EDGE('',*,*,#36763,.F.); +#36763 = EDGE_CURVE('',#36378,#36756,#36764,.T.); +#36764 = CIRCLE('',#36765,0.1); +#36765 = AXIS2_PLACEMENT_3D('',#36766,#36767,#36768); +#36766 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#36767 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#36768 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36769 = CYLINDRICAL_SURFACE('',#36770,0.1); +#36770 = AXIS2_PLACEMENT_3D('',#36771,#36772,#36773); +#36771 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#36772 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#36773 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#36774 = ADVANCED_FACE('',(#36775),#36786,.F.); +#36775 = FACE_BOUND('',#36776,.F.); +#36776 = EDGE_LOOP('',(#36777,#36783,#36784,#36785)); +#36777 = ORIENTED_EDGE('',*,*,#36778,.F.); +#36778 = EDGE_CURVE('',#36370,#36614,#36779,.T.); +#36779 = LINE('',#36780,#36781); +#36780 = CARTESIAN_POINT('',(-0.7,1.15,0.529763586955)); +#36781 = VECTOR('',#36782,1.); +#36782 = DIRECTION('',(0.,0.,1.)); +#36783 = ORIENTED_EDGE('',*,*,#36369,.T.); +#36784 = ORIENTED_EDGE('',*,*,#36638,.T.); +#36785 = ORIENTED_EDGE('',*,*,#36621,.F.); +#36786 = PLANE('',#36787); +#36787 = AXIS2_PLACEMENT_3D('',#36788,#36789,#36790); +#36788 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#36789 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#36790 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36791 = ADVANCED_FACE('',(#36792),#36803,.F.); +#36792 = FACE_BOUND('',#36793,.F.); +#36793 = EDGE_LOOP('',(#36794,#36795,#36796,#36802)); +#36794 = ORIENTED_EDGE('',*,*,#36525,.F.); +#36795 = ORIENTED_EDGE('',*,*,#36446,.T.); +#36796 = ORIENTED_EDGE('',*,*,#36797,.T.); +#36797 = EDGE_CURVE('',#36439,#36558,#36798,.T.); +#36798 = LINE('',#36799,#36800); +#36799 = CARTESIAN_POINT('',(0.7,0.2,0.529763586955)); +#36800 = VECTOR('',#36801,1.); +#36801 = DIRECTION('',(0.,0.,1.)); +#36802 = ORIENTED_EDGE('',*,*,#36557,.F.); +#36803 = PLANE('',#36804); +#36804 = AXIS2_PLACEMENT_3D('',#36805,#36806,#36807); +#36805 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36806 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36807 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36808 = ADVANCED_FACE('',(#36809),#36836,.F.); +#36809 = FACE_BOUND('',#36810,.F.); +#36810 = EDGE_LOOP('',(#36811,#36812,#36821,#36829)); +#36811 = ORIENTED_EDGE('',*,*,#36438,.T.); +#36812 = ORIENTED_EDGE('',*,*,#36813,.T.); +#36813 = EDGE_CURVE('',#36431,#36814,#36816,.T.); +#36814 = VERTEX_POINT('',#36815); +#36815 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#36816 = CIRCLE('',#36817,0.1); +#36817 = AXIS2_PLACEMENT_3D('',#36818,#36819,#36820); +#36818 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#36819 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#36820 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#36821 = ORIENTED_EDGE('',*,*,#36822,.F.); +#36822 = EDGE_CURVE('',#36823,#36814,#36825,.T.); +#36823 = VERTEX_POINT('',#36824); +#36824 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#36825 = LINE('',#36826,#36827); +#36826 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#36827 = VECTOR('',#36828,1.); +#36828 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36829 = ORIENTED_EDGE('',*,*,#36830,.F.); +#36830 = EDGE_CURVE('',#36439,#36823,#36831,.T.); +#36831 = CIRCLE('',#36832,0.1); +#36832 = AXIS2_PLACEMENT_3D('',#36833,#36834,#36835); +#36833 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#36834 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#36835 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#36836 = CYLINDRICAL_SURFACE('',#36837,0.1); +#36837 = AXIS2_PLACEMENT_3D('',#36838,#36839,#36840); +#36838 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#36839 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36840 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#36841 = ADVANCED_FACE('',(#36842),#36866,.F.); +#36842 = FACE_BOUND('',#36843,.F.); +#36843 = EDGE_LOOP('',(#36844,#36852,#36853,#36860)); +#36844 = ORIENTED_EDGE('',*,*,#36845,.F.); +#36845 = EDGE_CURVE('',#36431,#36846,#36848,.T.); +#36846 = VERTEX_POINT('',#36847); +#36847 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#36848 = LINE('',#36849,#36850); +#36849 = CARTESIAN_POINT('',(0.7,-0.2,0.529763586955)); +#36850 = VECTOR('',#36851,1.); +#36851 = DIRECTION('',(0.,0.,1.)); +#36852 = ORIENTED_EDGE('',*,*,#36430,.T.); +#36853 = ORIENTED_EDGE('',*,*,#36854,.T.); +#36854 = EDGE_CURVE('',#36424,#36855,#36857,.T.); +#36855 = VERTEX_POINT('',#36856); +#36856 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36857 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36858,#36859),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36858 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#36859 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36860 = ORIENTED_EDGE('',*,*,#36861,.F.); +#36861 = EDGE_CURVE('',#36846,#36855,#36862,.T.); +#36862 = LINE('',#36863,#36864); +#36863 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36864 = VECTOR('',#36865,1.); +#36865 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36866 = PLANE('',#36867); +#36867 = AXIS2_PLACEMENT_3D('',#36868,#36869,#36870); +#36868 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#36869 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36870 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#36871 = ADVANCED_FACE('',(#36872),#36889,.F.); +#36872 = FACE_BOUND('',#36873,.F.); +#36873 = EDGE_LOOP('',(#36874,#36875,#36876,#36884)); +#36874 = ORIENTED_EDGE('',*,*,#36463,.T.); +#36875 = ORIENTED_EDGE('',*,*,#36651,.T.); +#36876 = ORIENTED_EDGE('',*,*,#36877,.F.); +#36877 = EDGE_CURVE('',#36878,#36652,#36880,.T.); +#36878 = VERTEX_POINT('',#36879); +#36879 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36880 = LINE('',#36881,#36882); +#36881 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36882 = VECTOR('',#36883,1.); +#36883 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36884 = ORIENTED_EDGE('',*,*,#36885,.F.); +#36885 = EDGE_CURVE('',#36464,#36878,#36886,.T.); +#36886 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36887,#36888),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36887 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#36888 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36889 = PLANE('',#36890); +#36890 = AXIS2_PLACEMENT_3D('',#36891,#36892,#36893); +#36891 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#36892 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36893 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36894 = ADVANCED_FACE('',(#36895),#36912,.F.); +#36895 = FACE_BOUND('',#36896,.F.); +#36896 = EDGE_LOOP('',(#36897,#36898,#36905,#36911)); +#36897 = ORIENTED_EDGE('',*,*,#36492,.T.); +#36898 = ORIENTED_EDGE('',*,*,#36899,.T.); +#36899 = EDGE_CURVE('',#36486,#36900,#36902,.T.); +#36900 = VERTEX_POINT('',#36901); +#36901 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36902 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36903,#36904),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36903 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#36904 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36905 = ORIENTED_EDGE('',*,*,#36906,.F.); +#36906 = EDGE_CURVE('',#36855,#36900,#36907,.T.); +#36907 = LINE('',#36908,#36909); +#36908 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36909 = VECTOR('',#36910,1.); +#36910 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36911 = ORIENTED_EDGE('',*,*,#36854,.F.); +#36912 = PLANE('',#36913); +#36913 = AXIS2_PLACEMENT_3D('',#36914,#36915,#36916); +#36914 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#36915 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36916 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#36917 = ADVANCED_FACE('',(#36918),#36929,.F.); +#36918 = FACE_BOUND('',#36919,.F.); +#36919 = EDGE_LOOP('',(#36920,#36921,#36922,#36928)); +#36920 = ORIENTED_EDGE('',*,*,#36509,.T.); +#36921 = ORIENTED_EDGE('',*,*,#36885,.T.); +#36922 = ORIENTED_EDGE('',*,*,#36923,.F.); +#36923 = EDGE_CURVE('',#36900,#36878,#36924,.T.); +#36924 = LINE('',#36925,#36926); +#36925 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36926 = VECTOR('',#36927,1.); +#36927 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36928 = ORIENTED_EDGE('',*,*,#36899,.F.); +#36929 = PLANE('',#36930); +#36930 = AXIS2_PLACEMENT_3D('',#36931,#36932,#36933); +#36931 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#36932 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36933 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#36934 = ADVANCED_FACE('',(#36935),#36958,.F.); +#36935 = FACE_BOUND('',#36936,.F.); +#36936 = EDGE_LOOP('',(#36937,#36945,#36951,#36952)); +#36937 = ORIENTED_EDGE('',*,*,#36938,.F.); +#36938 = EDGE_CURVE('',#36724,#36939,#36941,.T.); +#36939 = VERTEX_POINT('',#36940); +#36940 = CARTESIAN_POINT('',(-0.675,0.75,0.725)); +#36941 = LINE('',#36942,#36943); +#36942 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36943 = VECTOR('',#36944,1.); +#36944 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#36945 = ORIENTED_EDGE('',*,*,#36946,.T.); +#36946 = EDGE_CURVE('',#36724,#36614,#36947,.T.); +#36947 = LINE('',#36948,#36949); +#36948 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36949 = VECTOR('',#36950,1.); +#36950 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#36951 = ORIENTED_EDGE('',*,*,#36613,.T.); +#36952 = ORIENTED_EDGE('',*,*,#36953,.F.); +#36953 = EDGE_CURVE('',#36939,#36606,#36954,.T.); +#36954 = LINE('',#36955,#36956); +#36955 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36956 = VECTOR('',#36957,1.); +#36957 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36958 = PLANE('',#36959); +#36959 = AXIS2_PLACEMENT_3D('',#36960,#36961,#36962); +#36960 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#36961 = DIRECTION('',(0.,0.,-1.)); +#36962 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#36963 = ADVANCED_FACE('',(#36964),#37012,.F.); +#36964 = FACE_BOUND('',#36965,.F.); +#36965 = EDGE_LOOP('',(#36966,#36976,#36984,#36990,#36991,#36992,#36999, + #37007)); +#36966 = ORIENTED_EDGE('',*,*,#36967,.T.); +#36967 = EDGE_CURVE('',#36968,#36970,#36972,.T.); +#36968 = VERTEX_POINT('',#36969); +#36969 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36970 = VERTEX_POINT('',#36971); +#36971 = CARTESIAN_POINT('',(-0.675,-1.15,0.725)); +#36972 = LINE('',#36973,#36974); +#36973 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36974 = VECTOR('',#36975,1.); +#36975 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36976 = ORIENTED_EDGE('',*,*,#36977,.T.); +#36977 = EDGE_CURVE('',#36970,#36978,#36980,.T.); +#36978 = VERTEX_POINT('',#36979); +#36979 = CARTESIAN_POINT('',(-0.675,-0.75,0.725)); +#36980 = LINE('',#36981,#36982); +#36981 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36982 = VECTOR('',#36983,1.); +#36983 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36984 = ORIENTED_EDGE('',*,*,#36985,.T.); +#36985 = EDGE_CURVE('',#36978,#36939,#36986,.T.); +#36986 = LINE('',#36987,#36988); +#36987 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#36988 = VECTOR('',#36989,1.); +#36989 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#36990 = ORIENTED_EDGE('',*,*,#36953,.T.); +#36991 = ORIENTED_EDGE('',*,*,#36605,.T.); +#36992 = ORIENTED_EDGE('',*,*,#36993,.T.); +#36993 = EDGE_CURVE('',#36598,#36994,#36996,.T.); +#36994 = VERTEX_POINT('',#36995); +#36995 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#36996 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36997,#36998),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36997 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#36998 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#36999 = ORIENTED_EDGE('',*,*,#37000,.F.); +#37000 = EDGE_CURVE('',#37001,#36994,#37003,.T.); +#37001 = VERTEX_POINT('',#37002); +#37002 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37003 = LINE('',#37004,#37005); +#37004 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37005 = VECTOR('',#37006,1.); +#37006 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#37007 = ORIENTED_EDGE('',*,*,#37008,.F.); +#37008 = EDGE_CURVE('',#36968,#37001,#37009,.T.); +#37009 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37010,#37011),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37010 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#37011 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37012 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37013,#37014) + ,(#37015,#37016 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37013 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#37014 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37015 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#37016 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#37017 = ADVANCED_FACE('',(#37018),#37035,.F.); +#37018 = FACE_BOUND('',#37019,.F.); +#37019 = EDGE_LOOP('',(#37020,#37021,#37028,#37034)); +#37020 = ORIENTED_EDGE('',*,*,#36597,.T.); +#37021 = ORIENTED_EDGE('',*,*,#37022,.T.); +#37022 = EDGE_CURVE('',#36590,#37023,#37025,.T.); +#37023 = VERTEX_POINT('',#37024); +#37024 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37025 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37026,#37027),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37026 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#37027 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37028 = ORIENTED_EDGE('',*,*,#37029,.F.); +#37029 = EDGE_CURVE('',#36994,#37023,#37030,.T.); +#37030 = LINE('',#37031,#37032); +#37031 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#37032 = VECTOR('',#37033,1.); +#37033 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#37034 = ORIENTED_EDGE('',*,*,#36993,.F.); +#37035 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37036,#37037) + ,(#37038,#37039 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37036 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#37037 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#37038 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#37039 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37040 = ADVANCED_FACE('',(#37041),#37058,.F.); +#37041 = FACE_BOUND('',#37042,.F.); +#37042 = EDGE_LOOP('',(#37043,#37044,#37051,#37057)); +#37043 = ORIENTED_EDGE('',*,*,#36589,.T.); +#37044 = ORIENTED_EDGE('',*,*,#37045,.T.); +#37045 = EDGE_CURVE('',#36582,#37046,#37048,.T.); +#37046 = VERTEX_POINT('',#37047); +#37047 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37048 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37049,#37050),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37049 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#37050 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37051 = ORIENTED_EDGE('',*,*,#37052,.F.); +#37052 = EDGE_CURVE('',#37023,#37046,#37053,.T.); +#37053 = LINE('',#37054,#37055); +#37054 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37055 = VECTOR('',#37056,1.); +#37056 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#37057 = ORIENTED_EDGE('',*,*,#37022,.F.); +#37058 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37059,#37060) + ,(#37061,#37062 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37059 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#37060 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37061 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#37062 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37063 = ADVANCED_FACE('',(#37064),#37081,.F.); +#37064 = FACE_BOUND('',#37065,.F.); +#37065 = EDGE_LOOP('',(#37066,#37067,#37074,#37080)); +#37066 = ORIENTED_EDGE('',*,*,#36581,.T.); +#37067 = ORIENTED_EDGE('',*,*,#37068,.T.); +#37068 = EDGE_CURVE('',#36574,#37069,#37071,.T.); +#37069 = VERTEX_POINT('',#37070); +#37070 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37071 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37072,#37073),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37072 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37073 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37074 = ORIENTED_EDGE('',*,*,#37075,.F.); +#37075 = EDGE_CURVE('',#37046,#37069,#37076,.T.); +#37076 = LINE('',#37077,#37078); +#37077 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37078 = VECTOR('',#37079,1.); +#37079 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#37080 = ORIENTED_EDGE('',*,*,#37045,.F.); +#37081 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37082,#37083) + ,(#37084,#37085 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37082 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#37083 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#37084 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37085 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37086 = ADVANCED_FACE('',(#37087),#37120,.F.); +#37087 = FACE_BOUND('',#37088,.F.); +#37088 = EDGE_LOOP('',(#37089,#37090,#37098,#37106,#37113,#37119)); +#37089 = ORIENTED_EDGE('',*,*,#36573,.T.); +#37090 = ORIENTED_EDGE('',*,*,#37091,.T.); +#37091 = EDGE_CURVE('',#36566,#37092,#37094,.T.); +#37092 = VERTEX_POINT('',#37093); +#37093 = CARTESIAN_POINT('',(0.675,-0.2,0.725)); +#37094 = LINE('',#37095,#37096); +#37095 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37096 = VECTOR('',#37097,1.); +#37097 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37098 = ORIENTED_EDGE('',*,*,#37099,.T.); +#37099 = EDGE_CURVE('',#37092,#37100,#37102,.T.); +#37100 = VERTEX_POINT('',#37101); +#37101 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37102 = LINE('',#37103,#37104); +#37103 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37104 = VECTOR('',#37105,1.); +#37105 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37106 = ORIENTED_EDGE('',*,*,#37107,.T.); +#37107 = EDGE_CURVE('',#37100,#37108,#37110,.T.); +#37108 = VERTEX_POINT('',#37109); +#37109 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37110 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37111,#37112),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37111 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37112 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37113 = ORIENTED_EDGE('',*,*,#37114,.F.); +#37114 = EDGE_CURVE('',#37069,#37108,#37115,.T.); +#37115 = LINE('',#37116,#37117); +#37116 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37117 = VECTOR('',#37118,1.); +#37118 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37119 = ORIENTED_EDGE('',*,*,#37068,.F.); +#37120 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37121,#37122) + ,(#37123,#37124 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37121 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#37122 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#37123 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37124 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37125 = ADVANCED_FACE('',(#37126),#37142,.F.); +#37126 = FACE_BOUND('',#37127,.F.); +#37127 = EDGE_LOOP('',(#37128,#37129,#37135,#37141)); +#37128 = ORIENTED_EDGE('',*,*,#36565,.F.); +#37129 = ORIENTED_EDGE('',*,*,#37130,.T.); +#37130 = EDGE_CURVE('',#36558,#36846,#37131,.T.); +#37131 = LINE('',#37132,#37133); +#37132 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#37133 = VECTOR('',#37134,1.); +#37134 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37135 = ORIENTED_EDGE('',*,*,#37136,.T.); +#37136 = EDGE_CURVE('',#36846,#37092,#37137,.T.); +#37137 = LINE('',#37138,#37139); +#37138 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#37139 = VECTOR('',#37140,1.); +#37140 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37141 = ORIENTED_EDGE('',*,*,#37091,.F.); +#37142 = PLANE('',#37143); +#37143 = AXIS2_PLACEMENT_3D('',#37144,#37145,#37146); +#37144 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#37145 = DIRECTION('',(0.,0.,-1.)); +#37146 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#37147 = ADVANCED_FACE('',(#37148),#37186,.F.); +#37148 = FACE_BOUND('',#37149,.F.); +#37149 = EDGE_LOOP('',(#37150,#37151,#37152,#37153,#37154,#37155,#37156, + #37162,#37163,#37171,#37179,#37185)); +#37150 = ORIENTED_EDGE('',*,*,#37136,.F.); +#37151 = ORIENTED_EDGE('',*,*,#36861,.T.); +#37152 = ORIENTED_EDGE('',*,*,#36906,.T.); +#37153 = ORIENTED_EDGE('',*,*,#36923,.T.); +#37154 = ORIENTED_EDGE('',*,*,#36877,.T.); +#37155 = ORIENTED_EDGE('',*,*,#36667,.T.); +#37156 = ORIENTED_EDGE('',*,*,#37157,.T.); +#37157 = EDGE_CURVE('',#36660,#36970,#37158,.T.); +#37158 = LINE('',#37159,#37160); +#37159 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#37160 = VECTOR('',#37161,1.); +#37161 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37162 = ORIENTED_EDGE('',*,*,#36967,.F.); +#37163 = ORIENTED_EDGE('',*,*,#37164,.F.); +#37164 = EDGE_CURVE('',#37165,#36968,#37167,.T.); +#37165 = VERTEX_POINT('',#37166); +#37166 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37167 = LINE('',#37168,#37169); +#37168 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37169 = VECTOR('',#37170,1.); +#37170 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#37171 = ORIENTED_EDGE('',*,*,#37172,.F.); +#37172 = EDGE_CURVE('',#37173,#37165,#37175,.T.); +#37173 = VERTEX_POINT('',#37174); +#37174 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37175 = LINE('',#37176,#37177); +#37176 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37177 = VECTOR('',#37178,1.); +#37178 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37179 = ORIENTED_EDGE('',*,*,#37180,.F.); +#37180 = EDGE_CURVE('',#37100,#37173,#37181,.T.); +#37181 = LINE('',#37182,#37183); +#37182 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37183 = VECTOR('',#37184,1.); +#37184 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#37185 = ORIENTED_EDGE('',*,*,#37099,.F.); +#37186 = PLANE('',#37187); +#37187 = AXIS2_PLACEMENT_3D('',#37188,#37189,#37190); +#37188 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#37189 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#37190 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#37191 = ADVANCED_FACE('',(#37192),#37261,.F.); +#37192 = FACE_BOUND('',#37193,.F.); +#37193 = EDGE_LOOP('',(#37194,#37195,#37196,#37204,#37213,#37221,#37229, + #37237,#37246,#37254)); +#37194 = ORIENTED_EDGE('',*,*,#36659,.F.); +#37195 = ORIENTED_EDGE('',*,*,#36699,.T.); +#37196 = ORIENTED_EDGE('',*,*,#37197,.T.); +#37197 = EDGE_CURVE('',#36692,#37198,#37200,.T.); +#37198 = VERTEX_POINT('',#37199); +#37199 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#37200 = LINE('',#37201,#37202); +#37201 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#37202 = VECTOR('',#37203,1.); +#37203 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37204 = ORIENTED_EDGE('',*,*,#37205,.T.); +#37205 = EDGE_CURVE('',#37198,#37206,#37208,.T.); +#37206 = VERTEX_POINT('',#37207); +#37207 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37208 = CIRCLE('',#37209,0.25); +#37209 = AXIS2_PLACEMENT_3D('',#37210,#37211,#37212); +#37210 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37211 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37212 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37213 = ORIENTED_EDGE('',*,*,#37214,.T.); +#37214 = EDGE_CURVE('',#37206,#37215,#37217,.T.); +#37215 = VERTEX_POINT('',#37216); +#37216 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37217 = LINE('',#37218,#37219); +#37218 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37219 = VECTOR('',#37220,1.); +#37220 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37221 = ORIENTED_EDGE('',*,*,#37222,.T.); +#37222 = EDGE_CURVE('',#37215,#37223,#37225,.T.); +#37223 = VERTEX_POINT('',#37224); +#37224 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37225 = LINE('',#37226,#37227); +#37226 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37227 = VECTOR('',#37228,1.); +#37228 = DIRECTION('',(0.,0.,1.)); +#37229 = ORIENTED_EDGE('',*,*,#37230,.T.); +#37230 = EDGE_CURVE('',#37223,#37231,#37233,.T.); +#37231 = VERTEX_POINT('',#37232); +#37232 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#37233 = LINE('',#37234,#37235); +#37234 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37235 = VECTOR('',#37236,1.); +#37236 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37237 = ORIENTED_EDGE('',*,*,#37238,.T.); +#37238 = EDGE_CURVE('',#37231,#37239,#37241,.T.); +#37239 = VERTEX_POINT('',#37240); +#37240 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37241 = CIRCLE('',#37242,0.1); +#37242 = AXIS2_PLACEMENT_3D('',#37243,#37244,#37245); +#37243 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37244 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37245 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37246 = ORIENTED_EDGE('',*,*,#37247,.T.); +#37247 = EDGE_CURVE('',#37239,#37248,#37250,.T.); +#37248 = VERTEX_POINT('',#37249); +#37249 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#37250 = LINE('',#37251,#37252); +#37251 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37252 = VECTOR('',#37253,1.); +#37253 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37254 = ORIENTED_EDGE('',*,*,#37255,.T.); +#37255 = EDGE_CURVE('',#37248,#36660,#37256,.T.); +#37256 = CIRCLE('',#37257,0.25); +#37257 = AXIS2_PLACEMENT_3D('',#37258,#37259,#37260); +#37258 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#37259 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37260 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37261 = PLANE('',#37262); +#37262 = AXIS2_PLACEMENT_3D('',#37263,#37264,#37265); +#37263 = CARTESIAN_POINT('',(-0.931323080229,-1.15,0.33452717391)); +#37264 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37265 = DIRECTION('',(0.,-0.,1.)); +#37266 = ADVANCED_FACE('',(#37267),#37285,.F.); +#37267 = FACE_BOUND('',#37268,.F.); +#37268 = EDGE_LOOP('',(#37269,#37270,#37278,#37284)); +#37269 = ORIENTED_EDGE('',*,*,#36691,.T.); +#37270 = ORIENTED_EDGE('',*,*,#37271,.T.); +#37271 = EDGE_CURVE('',#36683,#37272,#37274,.T.); +#37272 = VERTEX_POINT('',#37273); +#37273 = CARTESIAN_POINT('',(-0.843471632406,-0.75,0.206587955583)); +#37274 = LINE('',#37275,#37276); +#37275 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#37276 = VECTOR('',#37277,1.); +#37277 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37278 = ORIENTED_EDGE('',*,*,#37279,.F.); +#37279 = EDGE_CURVE('',#37198,#37272,#37280,.T.); +#37280 = LINE('',#37281,#37282); +#37281 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#37282 = VECTOR('',#37283,1.); +#37283 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37284 = ORIENTED_EDGE('',*,*,#37197,.F.); +#37285 = PLANE('',#37286); +#37286 = AXIS2_PLACEMENT_3D('',#37287,#37288,#37289); +#37287 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#37288 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#37289 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37290 = ADVANCED_FACE('',(#37291),#37353,.T.); +#37291 = FACE_BOUND('',#37292,.T.); +#37292 = EDGE_LOOP('',(#37293,#37294,#37295,#37296,#37305,#37313,#37321, + #37329,#37338,#37346)); +#37293 = ORIENTED_EDGE('',*,*,#36714,.F.); +#37294 = ORIENTED_EDGE('',*,*,#36682,.T.); +#37295 = ORIENTED_EDGE('',*,*,#37271,.T.); +#37296 = ORIENTED_EDGE('',*,*,#37297,.T.); +#37297 = EDGE_CURVE('',#37272,#37298,#37300,.T.); +#37298 = VERTEX_POINT('',#37299); +#37299 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#37300 = CIRCLE('',#37301,0.25); +#37301 = AXIS2_PLACEMENT_3D('',#37302,#37303,#37304); +#37302 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#37303 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37304 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37305 = ORIENTED_EDGE('',*,*,#37306,.T.); +#37306 = EDGE_CURVE('',#37298,#37307,#37309,.T.); +#37307 = VERTEX_POINT('',#37308); +#37308 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#37309 = LINE('',#37310,#37311); +#37310 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#37311 = VECTOR('',#37312,1.); +#37312 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37313 = ORIENTED_EDGE('',*,*,#37314,.T.); +#37314 = EDGE_CURVE('',#37307,#37315,#37317,.T.); +#37315 = VERTEX_POINT('',#37316); +#37316 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#37317 = LINE('',#37318,#37319); +#37318 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#37319 = VECTOR('',#37320,1.); +#37320 = DIRECTION('',(0.,0.,1.)); +#37321 = ORIENTED_EDGE('',*,*,#37322,.T.); +#37322 = EDGE_CURVE('',#37315,#37323,#37325,.T.); +#37323 = VERTEX_POINT('',#37324); +#37324 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.15)); +#37325 = LINE('',#37326,#37327); +#37326 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#37327 = VECTOR('',#37328,1.); +#37328 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37329 = ORIENTED_EDGE('',*,*,#37330,.T.); +#37330 = EDGE_CURVE('',#37323,#37331,#37333,.T.); +#37331 = VERTEX_POINT('',#37332); +#37332 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#37333 = CIRCLE('',#37334,0.1); +#37334 = AXIS2_PLACEMENT_3D('',#37335,#37336,#37337); +#37335 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#37336 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37337 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37338 = ORIENTED_EDGE('',*,*,#37339,.T.); +#37339 = EDGE_CURVE('',#37331,#37340,#37342,.T.); +#37340 = VERTEX_POINT('',#37341); +#37341 = CARTESIAN_POINT('',(-0.946201938253,-0.75,0.518412044417)); +#37342 = LINE('',#37343,#37344); +#37343 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#37344 = VECTOR('',#37345,1.); +#37345 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37346 = ORIENTED_EDGE('',*,*,#37347,.T.); +#37347 = EDGE_CURVE('',#37340,#36715,#37348,.T.); +#37348 = CIRCLE('',#37349,0.25); +#37349 = AXIS2_PLACEMENT_3D('',#37350,#37351,#37352); +#37350 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#37351 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37352 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37353 = PLANE('',#37354); +#37354 = AXIS2_PLACEMENT_3D('',#37355,#37356,#37357); +#37355 = CARTESIAN_POINT('',(-0.931323080229,-0.75,0.33452717391)); +#37356 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37357 = DIRECTION('',(0.,-0.,1.)); +#37358 = ADVANCED_FACE('',(#37359),#37370,.F.); +#37359 = FACE_BOUND('',#37360,.F.); +#37360 = EDGE_LOOP('',(#37361,#37362,#37363,#37364)); +#37361 = ORIENTED_EDGE('',*,*,#36731,.T.); +#37362 = ORIENTED_EDGE('',*,*,#36938,.T.); +#37363 = ORIENTED_EDGE('',*,*,#36985,.F.); +#37364 = ORIENTED_EDGE('',*,*,#37365,.F.); +#37365 = EDGE_CURVE('',#36715,#36978,#37366,.T.); +#37366 = LINE('',#37367,#37368); +#37367 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#37368 = VECTOR('',#37369,1.); +#37369 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37370 = PLANE('',#37371); +#37371 = AXIS2_PLACEMENT_3D('',#37372,#37373,#37374); +#37372 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#37373 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#37374 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#37375 = ADVANCED_FACE('',(#37376),#37445,.F.); +#37376 = FACE_BOUND('',#37377,.F.); +#37377 = EDGE_LOOP('',(#37378,#37379,#37380,#37388,#37397,#37405,#37413, + #37421,#37430,#37438)); +#37378 = ORIENTED_EDGE('',*,*,#36723,.F.); +#37379 = ORIENTED_EDGE('',*,*,#36763,.T.); +#37380 = ORIENTED_EDGE('',*,*,#37381,.T.); +#37381 = EDGE_CURVE('',#36756,#37382,#37384,.T.); +#37382 = VERTEX_POINT('',#37383); +#37383 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#37384 = LINE('',#37385,#37386); +#37385 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#37386 = VECTOR('',#37387,1.); +#37387 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37388 = ORIENTED_EDGE('',*,*,#37389,.T.); +#37389 = EDGE_CURVE('',#37382,#37390,#37392,.T.); +#37390 = VERTEX_POINT('',#37391); +#37391 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#37392 = CIRCLE('',#37393,0.25); +#37393 = AXIS2_PLACEMENT_3D('',#37394,#37395,#37396); +#37394 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#37395 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37396 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37397 = ORIENTED_EDGE('',*,*,#37398,.T.); +#37398 = EDGE_CURVE('',#37390,#37399,#37401,.T.); +#37399 = VERTEX_POINT('',#37400); +#37400 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#37401 = LINE('',#37402,#37403); +#37402 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#37403 = VECTOR('',#37404,1.); +#37404 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37405 = ORIENTED_EDGE('',*,*,#37406,.T.); +#37406 = EDGE_CURVE('',#37399,#37407,#37409,.T.); +#37407 = VERTEX_POINT('',#37408); +#37408 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#37409 = LINE('',#37410,#37411); +#37410 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#37411 = VECTOR('',#37412,1.); +#37412 = DIRECTION('',(0.,0.,1.)); +#37413 = ORIENTED_EDGE('',*,*,#37414,.T.); +#37414 = EDGE_CURVE('',#37407,#37415,#37417,.T.); +#37415 = VERTEX_POINT('',#37416); +#37416 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#37417 = LINE('',#37418,#37419); +#37418 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#37419 = VECTOR('',#37420,1.); +#37420 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37421 = ORIENTED_EDGE('',*,*,#37422,.T.); +#37422 = EDGE_CURVE('',#37415,#37423,#37425,.T.); +#37423 = VERTEX_POINT('',#37424); +#37424 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37425 = CIRCLE('',#37426,0.1); +#37426 = AXIS2_PLACEMENT_3D('',#37427,#37428,#37429); +#37427 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#37428 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37429 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37430 = ORIENTED_EDGE('',*,*,#37431,.T.); +#37431 = EDGE_CURVE('',#37423,#37432,#37434,.T.); +#37432 = VERTEX_POINT('',#37433); +#37433 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#37434 = LINE('',#37435,#37436); +#37435 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37436 = VECTOR('',#37437,1.); +#37437 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37438 = ORIENTED_EDGE('',*,*,#37439,.T.); +#37439 = EDGE_CURVE('',#37432,#36724,#37440,.T.); +#37440 = CIRCLE('',#37441,0.25); +#37441 = AXIS2_PLACEMENT_3D('',#37442,#37443,#37444); +#37442 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#37443 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37444 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37445 = PLANE('',#37446); +#37446 = AXIS2_PLACEMENT_3D('',#37447,#37448,#37449); +#37447 = CARTESIAN_POINT('',(-0.931323080229,0.75,0.33452717391)); +#37448 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37449 = DIRECTION('',(0.,-0.,1.)); +#37450 = ADVANCED_FACE('',(#37451),#37469,.F.); +#37451 = FACE_BOUND('',#37452,.F.); +#37452 = EDGE_LOOP('',(#37453,#37454,#37462,#37468)); +#37453 = ORIENTED_EDGE('',*,*,#36755,.T.); +#37454 = ORIENTED_EDGE('',*,*,#37455,.T.); +#37455 = EDGE_CURVE('',#36747,#37456,#37458,.T.); +#37456 = VERTEX_POINT('',#37457); +#37457 = CARTESIAN_POINT('',(-0.843471632406,1.15,0.206587955583)); +#37458 = LINE('',#37459,#37460); +#37459 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#37460 = VECTOR('',#37461,1.); +#37461 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37462 = ORIENTED_EDGE('',*,*,#37463,.F.); +#37463 = EDGE_CURVE('',#37382,#37456,#37464,.T.); +#37464 = LINE('',#37465,#37466); +#37465 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#37466 = VECTOR('',#37467,1.); +#37467 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37468 = ORIENTED_EDGE('',*,*,#37381,.F.); +#37469 = PLANE('',#37470); +#37470 = AXIS2_PLACEMENT_3D('',#37471,#37472,#37473); +#37471 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#37472 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#37473 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#37474 = ADVANCED_FACE('',(#37475),#37537,.T.); +#37475 = FACE_BOUND('',#37476,.T.); +#37476 = EDGE_LOOP('',(#37477,#37478,#37479,#37480,#37489,#37497,#37505, + #37513,#37522,#37530)); +#37477 = ORIENTED_EDGE('',*,*,#36778,.F.); +#37478 = ORIENTED_EDGE('',*,*,#36746,.T.); +#37479 = ORIENTED_EDGE('',*,*,#37455,.T.); +#37480 = ORIENTED_EDGE('',*,*,#37481,.T.); +#37481 = EDGE_CURVE('',#37456,#37482,#37484,.T.); +#37482 = VERTEX_POINT('',#37483); +#37483 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#37484 = CIRCLE('',#37485,0.25); +#37485 = AXIS2_PLACEMENT_3D('',#37486,#37487,#37488); +#37486 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#37487 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#37488 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37489 = ORIENTED_EDGE('',*,*,#37490,.T.); +#37490 = EDGE_CURVE('',#37482,#37491,#37493,.T.); +#37491 = VERTEX_POINT('',#37492); +#37492 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#37493 = LINE('',#37494,#37495); +#37494 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#37495 = VECTOR('',#37496,1.); +#37496 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37497 = ORIENTED_EDGE('',*,*,#37498,.T.); +#37498 = EDGE_CURVE('',#37491,#37499,#37501,.T.); +#37499 = VERTEX_POINT('',#37500); +#37500 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#37501 = LINE('',#37502,#37503); +#37502 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#37503 = VECTOR('',#37504,1.); +#37504 = DIRECTION('',(0.,0.,1.)); +#37505 = ORIENTED_EDGE('',*,*,#37506,.T.); +#37506 = EDGE_CURVE('',#37499,#37507,#37509,.T.); +#37507 = VERTEX_POINT('',#37508); +#37508 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.15)); +#37509 = LINE('',#37510,#37511); +#37510 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#37511 = VECTOR('',#37512,1.); +#37512 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37513 = ORIENTED_EDGE('',*,*,#37514,.T.); +#37514 = EDGE_CURVE('',#37507,#37515,#37517,.T.); +#37515 = VERTEX_POINT('',#37516); +#37516 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#37517 = CIRCLE('',#37518,0.1); +#37518 = AXIS2_PLACEMENT_3D('',#37519,#37520,#37521); +#37519 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#37520 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#37521 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37522 = ORIENTED_EDGE('',*,*,#37523,.T.); +#37523 = EDGE_CURVE('',#37515,#37524,#37526,.T.); +#37524 = VERTEX_POINT('',#37525); +#37525 = CARTESIAN_POINT('',(-0.946201938253,1.15,0.518412044417)); +#37526 = LINE('',#37527,#37528); +#37527 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#37528 = VECTOR('',#37529,1.); +#37529 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37530 = ORIENTED_EDGE('',*,*,#37531,.T.); +#37531 = EDGE_CURVE('',#37524,#36614,#37532,.T.); +#37532 = CIRCLE('',#37533,0.25); +#37533 = AXIS2_PLACEMENT_3D('',#37534,#37535,#37536); +#37534 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#37535 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#37536 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37537 = PLANE('',#37538); +#37538 = AXIS2_PLACEMENT_3D('',#37539,#37540,#37541); +#37539 = CARTESIAN_POINT('',(-0.931323080229,1.15,0.33452717391)); +#37540 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37541 = DIRECTION('',(0.,-0.,1.)); +#37542 = ADVANCED_FACE('',(#37543),#37612,.F.); +#37543 = FACE_BOUND('',#37544,.F.); +#37544 = EDGE_LOOP('',(#37545,#37546,#37547,#37555,#37564,#37572,#37580, + #37588,#37597,#37605)); +#37545 = ORIENTED_EDGE('',*,*,#36797,.F.); +#37546 = ORIENTED_EDGE('',*,*,#36830,.T.); +#37547 = ORIENTED_EDGE('',*,*,#37548,.T.); +#37548 = EDGE_CURVE('',#36823,#37549,#37551,.T.); +#37549 = VERTEX_POINT('',#37550); +#37550 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#37551 = LINE('',#37552,#37553); +#37552 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#37553 = VECTOR('',#37554,1.); +#37554 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#37555 = ORIENTED_EDGE('',*,*,#37556,.T.); +#37556 = EDGE_CURVE('',#37549,#37557,#37559,.T.); +#37557 = VERTEX_POINT('',#37558); +#37558 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#37559 = CIRCLE('',#37560,0.25); +#37560 = AXIS2_PLACEMENT_3D('',#37561,#37562,#37563); +#37561 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#37562 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37563 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#37564 = ORIENTED_EDGE('',*,*,#37565,.T.); +#37565 = EDGE_CURVE('',#37557,#37566,#37568,.T.); +#37566 = VERTEX_POINT('',#37567); +#37567 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#37568 = LINE('',#37569,#37570); +#37569 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#37570 = VECTOR('',#37571,1.); +#37571 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#37572 = ORIENTED_EDGE('',*,*,#37573,.T.); +#37573 = EDGE_CURVE('',#37566,#37574,#37576,.T.); +#37574 = VERTEX_POINT('',#37575); +#37575 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#37576 = LINE('',#37577,#37578); +#37577 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#37578 = VECTOR('',#37579,1.); +#37579 = DIRECTION('',(0.,0.,1.)); +#37580 = ORIENTED_EDGE('',*,*,#37581,.T.); +#37581 = EDGE_CURVE('',#37574,#37582,#37584,.T.); +#37582 = VERTEX_POINT('',#37583); +#37583 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#37584 = LINE('',#37585,#37586); +#37585 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#37586 = VECTOR('',#37587,1.); +#37587 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37588 = ORIENTED_EDGE('',*,*,#37589,.T.); +#37589 = EDGE_CURVE('',#37582,#37590,#37592,.T.); +#37590 = VERTEX_POINT('',#37591); +#37591 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#37592 = CIRCLE('',#37593,0.1); +#37593 = AXIS2_PLACEMENT_3D('',#37594,#37595,#37596); +#37594 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#37595 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#37596 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#37597 = ORIENTED_EDGE('',*,*,#37598,.T.); +#37598 = EDGE_CURVE('',#37590,#37599,#37601,.T.); +#37599 = VERTEX_POINT('',#37600); +#37600 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#37601 = LINE('',#37602,#37603); +#37602 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#37603 = VECTOR('',#37604,1.); +#37604 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#37605 = ORIENTED_EDGE('',*,*,#37606,.T.); +#37606 = EDGE_CURVE('',#37599,#36558,#37607,.T.); +#37607 = CIRCLE('',#37608,0.25); +#37608 = AXIS2_PLACEMENT_3D('',#37609,#37610,#37611); +#37609 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#37610 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37611 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#37612 = PLANE('',#37613); +#37613 = AXIS2_PLACEMENT_3D('',#37614,#37615,#37616); +#37614 = CARTESIAN_POINT('',(0.931323080229,0.2,0.33452717391)); +#37615 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37616 = DIRECTION('',(0.,0.,1.)); +#37617 = ADVANCED_FACE('',(#37618),#37636,.F.); +#37618 = FACE_BOUND('',#37619,.F.); +#37619 = EDGE_LOOP('',(#37620,#37621,#37629,#37635)); +#37620 = ORIENTED_EDGE('',*,*,#36822,.T.); +#37621 = ORIENTED_EDGE('',*,*,#37622,.T.); +#37622 = EDGE_CURVE('',#36814,#37623,#37625,.T.); +#37623 = VERTEX_POINT('',#37624); +#37624 = CARTESIAN_POINT('',(0.843471632406,-0.2,0.206587955583)); +#37625 = LINE('',#37626,#37627); +#37626 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#37627 = VECTOR('',#37628,1.); +#37628 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#37629 = ORIENTED_EDGE('',*,*,#37630,.F.); +#37630 = EDGE_CURVE('',#37549,#37623,#37631,.T.); +#37631 = LINE('',#37632,#37633); +#37632 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#37633 = VECTOR('',#37634,1.); +#37634 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37635 = ORIENTED_EDGE('',*,*,#37548,.F.); +#37636 = PLANE('',#37637); +#37637 = AXIS2_PLACEMENT_3D('',#37638,#37639,#37640); +#37638 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#37639 = DIRECTION('',(0.987833053268,1.096715000224E-16,0.155518033909) + ); +#37640 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#37641 = ADVANCED_FACE('',(#37642),#37704,.T.); +#37642 = FACE_BOUND('',#37643,.T.); +#37643 = EDGE_LOOP('',(#37644,#37645,#37646,#37647,#37656,#37664,#37672, + #37680,#37689,#37697)); +#37644 = ORIENTED_EDGE('',*,*,#36845,.F.); +#37645 = ORIENTED_EDGE('',*,*,#36813,.T.); +#37646 = ORIENTED_EDGE('',*,*,#37622,.T.); +#37647 = ORIENTED_EDGE('',*,*,#37648,.T.); +#37648 = EDGE_CURVE('',#37623,#37649,#37651,.T.); +#37649 = VERTEX_POINT('',#37650); +#37650 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#37651 = CIRCLE('',#37652,0.25); +#37652 = AXIS2_PLACEMENT_3D('',#37653,#37654,#37655); +#37653 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#37654 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37655 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#37656 = ORIENTED_EDGE('',*,*,#37657,.T.); +#37657 = EDGE_CURVE('',#37649,#37658,#37660,.T.); +#37658 = VERTEX_POINT('',#37659); +#37659 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#37660 = LINE('',#37661,#37662); +#37661 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#37662 = VECTOR('',#37663,1.); +#37663 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#37664 = ORIENTED_EDGE('',*,*,#37665,.T.); +#37665 = EDGE_CURVE('',#37658,#37666,#37668,.T.); +#37666 = VERTEX_POINT('',#37667); +#37667 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#37668 = LINE('',#37669,#37670); +#37669 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#37670 = VECTOR('',#37671,1.); +#37671 = DIRECTION('',(0.,0.,1.)); +#37672 = ORIENTED_EDGE('',*,*,#37673,.T.); +#37673 = EDGE_CURVE('',#37666,#37674,#37676,.T.); +#37674 = VERTEX_POINT('',#37675); +#37675 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.15)); +#37676 = LINE('',#37677,#37678); +#37677 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#37678 = VECTOR('',#37679,1.); +#37679 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37680 = ORIENTED_EDGE('',*,*,#37681,.T.); +#37681 = EDGE_CURVE('',#37674,#37682,#37684,.T.); +#37682 = VERTEX_POINT('',#37683); +#37683 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#37684 = CIRCLE('',#37685,0.1); +#37685 = AXIS2_PLACEMENT_3D('',#37686,#37687,#37688); +#37686 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#37687 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#37688 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#37689 = ORIENTED_EDGE('',*,*,#37690,.T.); +#37690 = EDGE_CURVE('',#37682,#37691,#37693,.T.); +#37691 = VERTEX_POINT('',#37692); +#37692 = CARTESIAN_POINT('',(0.946201938253,-0.2,0.518412044417)); +#37693 = LINE('',#37694,#37695); +#37694 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#37695 = VECTOR('',#37696,1.); +#37696 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#37697 = ORIENTED_EDGE('',*,*,#37698,.T.); +#37698 = EDGE_CURVE('',#37691,#36846,#37699,.T.); +#37699 = CIRCLE('',#37700,0.25); +#37700 = AXIS2_PLACEMENT_3D('',#37701,#37702,#37703); +#37701 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#37702 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#37703 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#37704 = PLANE('',#37705); +#37705 = AXIS2_PLACEMENT_3D('',#37706,#37707,#37708); +#37706 = CARTESIAN_POINT('',(0.931323080229,-0.2,0.33452717391)); +#37707 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37708 = DIRECTION('',(0.,0.,1.)); +#37709 = ADVANCED_FACE('',(#37710),#37721,.T.); +#37710 = FACE_BOUND('',#37711,.T.); +#37711 = EDGE_LOOP('',(#37712,#37713,#37714,#37715)); +#37712 = ORIENTED_EDGE('',*,*,#37439,.T.); +#37713 = ORIENTED_EDGE('',*,*,#36946,.T.); +#37714 = ORIENTED_EDGE('',*,*,#37531,.F.); +#37715 = ORIENTED_EDGE('',*,*,#37716,.F.); +#37716 = EDGE_CURVE('',#37432,#37524,#37717,.T.); +#37717 = LINE('',#37718,#37719); +#37718 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#37719 = VECTOR('',#37720,1.); +#37720 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37721 = CYLINDRICAL_SURFACE('',#37722,0.25); +#37722 = AXIS2_PLACEMENT_3D('',#37723,#37724,#37725); +#37723 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#37724 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37725 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37726 = ADVANCED_FACE('',(#37727),#37738,.F.); +#37727 = FACE_BOUND('',#37728,.F.); +#37728 = EDGE_LOOP('',(#37729,#37730,#37736,#37737)); +#37729 = ORIENTED_EDGE('',*,*,#37157,.F.); +#37730 = ORIENTED_EDGE('',*,*,#37731,.T.); +#37731 = EDGE_CURVE('',#36660,#36715,#37732,.T.); +#37732 = LINE('',#37733,#37734); +#37733 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#37734 = VECTOR('',#37735,1.); +#37735 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37736 = ORIENTED_EDGE('',*,*,#37365,.T.); +#37737 = ORIENTED_EDGE('',*,*,#36977,.F.); +#37738 = PLANE('',#37739); +#37739 = AXIS2_PLACEMENT_3D('',#37740,#37741,#37742); +#37740 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#37741 = DIRECTION('',(0.,0.,-1.)); +#37742 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37743 = ADVANCED_FACE('',(#37744,#37773),#37784,.T.); +#37744 = FACE_BOUND('',#37745,.T.); +#37745 = EDGE_LOOP('',(#37746,#37747,#37748,#37749,#37757,#37765,#37771, + #37772)); +#37746 = ORIENTED_EDGE('',*,*,#37052,.F.); +#37747 = ORIENTED_EDGE('',*,*,#37029,.F.); +#37748 = ORIENTED_EDGE('',*,*,#37000,.F.); +#37749 = ORIENTED_EDGE('',*,*,#37750,.F.); +#37750 = EDGE_CURVE('',#37751,#37001,#37753,.T.); +#37751 = VERTEX_POINT('',#37752); +#37752 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37753 = LINE('',#37754,#37755); +#37754 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37755 = VECTOR('',#37756,1.); +#37756 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#37757 = ORIENTED_EDGE('',*,*,#37758,.F.); +#37758 = EDGE_CURVE('',#37759,#37751,#37761,.T.); +#37759 = VERTEX_POINT('',#37760); +#37760 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37761 = LINE('',#37762,#37763); +#37762 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37763 = VECTOR('',#37764,1.); +#37764 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#37765 = ORIENTED_EDGE('',*,*,#37766,.F.); +#37766 = EDGE_CURVE('',#37108,#37759,#37767,.T.); +#37767 = LINE('',#37768,#37769); +#37768 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37769 = VECTOR('',#37770,1.); +#37770 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#37771 = ORIENTED_EDGE('',*,*,#37114,.F.); +#37772 = ORIENTED_EDGE('',*,*,#37075,.F.); +#37773 = FACE_BOUND('',#37774,.T.); +#37774 = EDGE_LOOP('',(#37775)); +#37775 = ORIENTED_EDGE('',*,*,#37776,.T.); +#37776 = EDGE_CURVE('',#37777,#37777,#37779,.T.); +#37777 = VERTEX_POINT('',#37778); +#37778 = CARTESIAN_POINT('',(-0.428243103516,1.178243103516,1.2)); +#37779 = CIRCLE('',#37780,5.E-02); +#37780 = AXIS2_PLACEMENT_3D('',#37781,#37782,#37783); +#37781 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#37782 = DIRECTION('',(0.,-0.,-1.)); +#37783 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37784 = PLANE('',#37785); +#37785 = AXIS2_PLACEMENT_3D('',#37786,#37787,#37788); +#37786 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#37787 = DIRECTION('',(0.,0.,1.)); +#37788 = DIRECTION('',(0.369013679242,-0.929423963825,0.)); +#37789 = ADVANCED_FACE('',(#37790),#37800,.F.); +#37790 = FACE_BOUND('',#37791,.F.); +#37791 = EDGE_LOOP('',(#37792,#37793,#37794,#37795)); +#37792 = ORIENTED_EDGE('',*,*,#37164,.T.); +#37793 = ORIENTED_EDGE('',*,*,#37008,.T.); +#37794 = ORIENTED_EDGE('',*,*,#37750,.F.); +#37795 = ORIENTED_EDGE('',*,*,#37796,.F.); +#37796 = EDGE_CURVE('',#37165,#37751,#37797,.T.); +#37797 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37798,#37799),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37798 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37799 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37800 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37801,#37802) + ,(#37803,#37804 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37801 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37802 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37803 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#37804 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#37805 = ADVANCED_FACE('',(#37806),#37816,.F.); +#37806 = FACE_BOUND('',#37807,.F.); +#37807 = EDGE_LOOP('',(#37808,#37809,#37814,#37815)); +#37808 = ORIENTED_EDGE('',*,*,#37180,.T.); +#37809 = ORIENTED_EDGE('',*,*,#37810,.T.); +#37810 = EDGE_CURVE('',#37173,#37759,#37811,.T.); +#37811 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37812,#37813),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37812 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37813 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37814 = ORIENTED_EDGE('',*,*,#37766,.F.); +#37815 = ORIENTED_EDGE('',*,*,#37107,.F.); +#37816 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37817,#37818) + ,(#37819,#37820 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#37817 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#37818 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#37819 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37820 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37821 = ADVANCED_FACE('',(#37822),#37833,.T.); +#37822 = FACE_BOUND('',#37823,.T.); +#37823 = EDGE_LOOP('',(#37824,#37825,#37826,#37827)); +#37824 = ORIENTED_EDGE('',*,*,#37606,.T.); +#37825 = ORIENTED_EDGE('',*,*,#37130,.T.); +#37826 = ORIENTED_EDGE('',*,*,#37698,.F.); +#37827 = ORIENTED_EDGE('',*,*,#37828,.F.); +#37828 = EDGE_CURVE('',#37599,#37691,#37829,.T.); +#37829 = LINE('',#37830,#37831); +#37830 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#37831 = VECTOR('',#37832,1.); +#37832 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#37833 = CYLINDRICAL_SURFACE('',#37834,0.25); +#37834 = AXIS2_PLACEMENT_3D('',#37835,#37836,#37837); +#37835 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#37836 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#37837 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#37838 = ADVANCED_FACE('',(#37839),#37845,.F.); +#37839 = FACE_BOUND('',#37840,.F.); +#37840 = EDGE_LOOP('',(#37841,#37842,#37843,#37844)); +#37841 = ORIENTED_EDGE('',*,*,#37172,.T.); +#37842 = ORIENTED_EDGE('',*,*,#37796,.T.); +#37843 = ORIENTED_EDGE('',*,*,#37758,.F.); +#37844 = ORIENTED_EDGE('',*,*,#37810,.F.); +#37845 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#37846,#37847) + ,(#37848,#37849 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#37846 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#37847 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#37848 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#37849 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#37850 = ADVANCED_FACE('',(#37851),#37862,.T.); +#37851 = FACE_BOUND('',#37852,.T.); +#37852 = EDGE_LOOP('',(#37853,#37854,#37855,#37856)); +#37853 = ORIENTED_EDGE('',*,*,#37255,.T.); +#37854 = ORIENTED_EDGE('',*,*,#37731,.T.); +#37855 = ORIENTED_EDGE('',*,*,#37347,.F.); +#37856 = ORIENTED_EDGE('',*,*,#37857,.F.); +#37857 = EDGE_CURVE('',#37248,#37340,#37858,.T.); +#37858 = LINE('',#37859,#37860); +#37859 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#37860 = VECTOR('',#37861,1.); +#37861 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37862 = CYLINDRICAL_SURFACE('',#37863,0.25); +#37863 = AXIS2_PLACEMENT_3D('',#37864,#37865,#37866); +#37864 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#37865 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37866 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#37867 = ADVANCED_FACE('',(#37868),#37879,.F.); +#37868 = FACE_BOUND('',#37869,.F.); +#37869 = EDGE_LOOP('',(#37870,#37876,#37877,#37878)); +#37870 = ORIENTED_EDGE('',*,*,#37871,.T.); +#37871 = EDGE_CURVE('',#37239,#37331,#37872,.T.); +#37872 = LINE('',#37873,#37874); +#37873 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37874 = VECTOR('',#37875,1.); +#37875 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37876 = ORIENTED_EDGE('',*,*,#37339,.T.); +#37877 = ORIENTED_EDGE('',*,*,#37857,.F.); +#37878 = ORIENTED_EDGE('',*,*,#37247,.F.); +#37879 = PLANE('',#37880); +#37880 = AXIS2_PLACEMENT_3D('',#37881,#37882,#37883); +#37881 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#37882 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#37883 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37884 = ADVANCED_FACE('',(#37885),#37896,.F.); +#37885 = FACE_BOUND('',#37886,.F.); +#37886 = EDGE_LOOP('',(#37887,#37893,#37894,#37895)); +#37887 = ORIENTED_EDGE('',*,*,#37888,.T.); +#37888 = EDGE_CURVE('',#37231,#37323,#37889,.T.); +#37889 = LINE('',#37890,#37891); +#37890 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#37891 = VECTOR('',#37892,1.); +#37892 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37893 = ORIENTED_EDGE('',*,*,#37330,.T.); +#37894 = ORIENTED_EDGE('',*,*,#37871,.F.); +#37895 = ORIENTED_EDGE('',*,*,#37238,.F.); +#37896 = CYLINDRICAL_SURFACE('',#37897,0.1); +#37897 = AXIS2_PLACEMENT_3D('',#37898,#37899,#37900); +#37898 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37899 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37900 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37901 = ADVANCED_FACE('',(#37902),#37913,.F.); +#37902 = FACE_BOUND('',#37903,.F.); +#37903 = EDGE_LOOP('',(#37904,#37910,#37911,#37912)); +#37904 = ORIENTED_EDGE('',*,*,#37905,.T.); +#37905 = EDGE_CURVE('',#37223,#37315,#37906,.T.); +#37906 = LINE('',#37907,#37908); +#37907 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37908 = VECTOR('',#37909,1.); +#37909 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37910 = ORIENTED_EDGE('',*,*,#37322,.T.); +#37911 = ORIENTED_EDGE('',*,*,#37888,.F.); +#37912 = ORIENTED_EDGE('',*,*,#37230,.F.); +#37913 = PLANE('',#37914); +#37914 = AXIS2_PLACEMENT_3D('',#37915,#37916,#37917); +#37915 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#37916 = DIRECTION('',(0.,0.,-1.)); +#37917 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37918 = ADVANCED_FACE('',(#37919),#37930,.F.); +#37919 = FACE_BOUND('',#37920,.F.); +#37920 = EDGE_LOOP('',(#37921,#37927,#37928,#37929)); +#37921 = ORIENTED_EDGE('',*,*,#37922,.T.); +#37922 = EDGE_CURVE('',#37215,#37307,#37923,.T.); +#37923 = LINE('',#37924,#37925); +#37924 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37925 = VECTOR('',#37926,1.); +#37926 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37927 = ORIENTED_EDGE('',*,*,#37314,.T.); +#37928 = ORIENTED_EDGE('',*,*,#37905,.F.); +#37929 = ORIENTED_EDGE('',*,*,#37222,.F.); +#37930 = PLANE('',#37931); +#37931 = AXIS2_PLACEMENT_3D('',#37932,#37933,#37934); +#37932 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#37933 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#37934 = DIRECTION('',(0.,0.,1.)); +#37935 = ADVANCED_FACE('',(#37936),#37947,.F.); +#37936 = FACE_BOUND('',#37937,.F.); +#37937 = EDGE_LOOP('',(#37938,#37944,#37945,#37946)); +#37938 = ORIENTED_EDGE('',*,*,#37939,.T.); +#37939 = EDGE_CURVE('',#37206,#37298,#37940,.T.); +#37940 = LINE('',#37941,#37942); +#37941 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37942 = VECTOR('',#37943,1.); +#37943 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37944 = ORIENTED_EDGE('',*,*,#37306,.T.); +#37945 = ORIENTED_EDGE('',*,*,#37922,.F.); +#37946 = ORIENTED_EDGE('',*,*,#37214,.F.); +#37947 = PLANE('',#37948); +#37948 = AXIS2_PLACEMENT_3D('',#37949,#37950,#37951); +#37949 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#37950 = DIRECTION('',(0.,0.,1.)); +#37951 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#37952 = ADVANCED_FACE('',(#37953),#37959,.T.); +#37953 = FACE_BOUND('',#37954,.T.); +#37954 = EDGE_LOOP('',(#37955,#37956,#37957,#37958)); +#37955 = ORIENTED_EDGE('',*,*,#37205,.T.); +#37956 = ORIENTED_EDGE('',*,*,#37939,.T.); +#37957 = ORIENTED_EDGE('',*,*,#37297,.F.); +#37958 = ORIENTED_EDGE('',*,*,#37279,.F.); +#37959 = CYLINDRICAL_SURFACE('',#37960,0.25); +#37960 = AXIS2_PLACEMENT_3D('',#37961,#37962,#37963); +#37961 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#37962 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37963 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#37964 = ADVANCED_FACE('',(#37965),#37976,.F.); +#37965 = FACE_BOUND('',#37966,.F.); +#37966 = EDGE_LOOP('',(#37967,#37973,#37974,#37975)); +#37967 = ORIENTED_EDGE('',*,*,#37968,.T.); +#37968 = EDGE_CURVE('',#37423,#37515,#37969,.T.); +#37969 = LINE('',#37970,#37971); +#37970 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37971 = VECTOR('',#37972,1.); +#37972 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37973 = ORIENTED_EDGE('',*,*,#37523,.T.); +#37974 = ORIENTED_EDGE('',*,*,#37716,.F.); +#37975 = ORIENTED_EDGE('',*,*,#37431,.F.); +#37976 = PLANE('',#37977); +#37977 = AXIS2_PLACEMENT_3D('',#37978,#37979,#37980); +#37978 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#37979 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#37980 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#37981 = ADVANCED_FACE('',(#37982),#37993,.F.); +#37982 = FACE_BOUND('',#37983,.F.); +#37983 = EDGE_LOOP('',(#37984,#37990,#37991,#37992)); +#37984 = ORIENTED_EDGE('',*,*,#37985,.T.); +#37985 = EDGE_CURVE('',#37415,#37507,#37986,.T.); +#37986 = LINE('',#37987,#37988); +#37987 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#37988 = VECTOR('',#37989,1.); +#37989 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#37990 = ORIENTED_EDGE('',*,*,#37514,.T.); +#37991 = ORIENTED_EDGE('',*,*,#37968,.F.); +#37992 = ORIENTED_EDGE('',*,*,#37422,.F.); +#37993 = CYLINDRICAL_SURFACE('',#37994,0.1); +#37994 = AXIS2_PLACEMENT_3D('',#37995,#37996,#37997); +#37995 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#37996 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#37997 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#37998 = ADVANCED_FACE('',(#37999),#38010,.F.); +#37999 = FACE_BOUND('',#38000,.F.); +#38000 = EDGE_LOOP('',(#38001,#38007,#38008,#38009)); +#38001 = ORIENTED_EDGE('',*,*,#38002,.T.); +#38002 = EDGE_CURVE('',#37407,#37499,#38003,.T.); +#38003 = LINE('',#38004,#38005); +#38004 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#38005 = VECTOR('',#38006,1.); +#38006 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38007 = ORIENTED_EDGE('',*,*,#37506,.T.); +#38008 = ORIENTED_EDGE('',*,*,#37985,.F.); +#38009 = ORIENTED_EDGE('',*,*,#37414,.F.); +#38010 = PLANE('',#38011); +#38011 = AXIS2_PLACEMENT_3D('',#38012,#38013,#38014); +#38012 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#38013 = DIRECTION('',(0.,0.,-1.)); +#38014 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#38015 = ADVANCED_FACE('',(#38016),#38027,.F.); +#38016 = FACE_BOUND('',#38017,.F.); +#38017 = EDGE_LOOP('',(#38018,#38024,#38025,#38026)); +#38018 = ORIENTED_EDGE('',*,*,#38019,.T.); +#38019 = EDGE_CURVE('',#37399,#37491,#38020,.T.); +#38020 = LINE('',#38021,#38022); +#38021 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#38022 = VECTOR('',#38023,1.); +#38023 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38024 = ORIENTED_EDGE('',*,*,#37498,.T.); +#38025 = ORIENTED_EDGE('',*,*,#38002,.F.); +#38026 = ORIENTED_EDGE('',*,*,#37406,.F.); +#38027 = PLANE('',#38028); +#38028 = AXIS2_PLACEMENT_3D('',#38029,#38030,#38031); +#38029 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#38030 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#38031 = DIRECTION('',(0.,0.,1.)); +#38032 = ADVANCED_FACE('',(#38033),#38044,.F.); +#38033 = FACE_BOUND('',#38034,.F.); +#38034 = EDGE_LOOP('',(#38035,#38041,#38042,#38043)); +#38035 = ORIENTED_EDGE('',*,*,#38036,.T.); +#38036 = EDGE_CURVE('',#37390,#37482,#38037,.T.); +#38037 = LINE('',#38038,#38039); +#38038 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#38039 = VECTOR('',#38040,1.); +#38040 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38041 = ORIENTED_EDGE('',*,*,#37490,.T.); +#38042 = ORIENTED_EDGE('',*,*,#38019,.F.); +#38043 = ORIENTED_EDGE('',*,*,#37398,.F.); +#38044 = PLANE('',#38045); +#38045 = AXIS2_PLACEMENT_3D('',#38046,#38047,#38048); +#38046 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#38047 = DIRECTION('',(0.,0.,1.)); +#38048 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38049 = ADVANCED_FACE('',(#38050),#38056,.T.); +#38050 = FACE_BOUND('',#38051,.T.); +#38051 = EDGE_LOOP('',(#38052,#38053,#38054,#38055)); +#38052 = ORIENTED_EDGE('',*,*,#37389,.T.); +#38053 = ORIENTED_EDGE('',*,*,#38036,.T.); +#38054 = ORIENTED_EDGE('',*,*,#37481,.F.); +#38055 = ORIENTED_EDGE('',*,*,#37463,.F.); +#38056 = CYLINDRICAL_SURFACE('',#38057,0.25); +#38057 = AXIS2_PLACEMENT_3D('',#38058,#38059,#38060); +#38058 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#38059 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#38060 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#38061 = ADVANCED_FACE('',(#38062),#38073,.F.); +#38062 = FACE_BOUND('',#38063,.F.); +#38063 = EDGE_LOOP('',(#38064,#38070,#38071,#38072)); +#38064 = ORIENTED_EDGE('',*,*,#38065,.T.); +#38065 = EDGE_CURVE('',#37590,#37682,#38066,.T.); +#38066 = LINE('',#38067,#38068); +#38067 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#38068 = VECTOR('',#38069,1.); +#38069 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38070 = ORIENTED_EDGE('',*,*,#37690,.T.); +#38071 = ORIENTED_EDGE('',*,*,#37828,.F.); +#38072 = ORIENTED_EDGE('',*,*,#37598,.F.); +#38073 = PLANE('',#38074); +#38074 = AXIS2_PLACEMENT_3D('',#38075,#38076,#38077); +#38075 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#38076 = DIRECTION('',(-0.987833053268,-1.096715000224E-16, + -0.155518033909)); +#38077 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#38078 = ADVANCED_FACE('',(#38079),#38090,.F.); +#38079 = FACE_BOUND('',#38080,.F.); +#38080 = EDGE_LOOP('',(#38081,#38087,#38088,#38089)); +#38081 = ORIENTED_EDGE('',*,*,#38082,.T.); +#38082 = EDGE_CURVE('',#37582,#37674,#38083,.T.); +#38083 = LINE('',#38084,#38085); +#38084 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#38085 = VECTOR('',#38086,1.); +#38086 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38087 = ORIENTED_EDGE('',*,*,#37681,.T.); +#38088 = ORIENTED_EDGE('',*,*,#38065,.F.); +#38089 = ORIENTED_EDGE('',*,*,#37589,.F.); +#38090 = CYLINDRICAL_SURFACE('',#38091,0.1); +#38091 = AXIS2_PLACEMENT_3D('',#38092,#38093,#38094); +#38092 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#38093 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38094 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#38095 = ADVANCED_FACE('',(#38096),#38107,.F.); +#38096 = FACE_BOUND('',#38097,.F.); +#38097 = EDGE_LOOP('',(#38098,#38104,#38105,#38106)); +#38098 = ORIENTED_EDGE('',*,*,#38099,.T.); +#38099 = EDGE_CURVE('',#37574,#37666,#38100,.T.); +#38100 = LINE('',#38101,#38102); +#38101 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#38102 = VECTOR('',#38103,1.); +#38103 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38104 = ORIENTED_EDGE('',*,*,#37673,.T.); +#38105 = ORIENTED_EDGE('',*,*,#38082,.F.); +#38106 = ORIENTED_EDGE('',*,*,#37581,.F.); +#38107 = PLANE('',#38108); +#38108 = AXIS2_PLACEMENT_3D('',#38109,#38110,#38111); +#38109 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#38110 = DIRECTION('',(0.,0.,-1.)); +#38111 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#38112 = ADVANCED_FACE('',(#38113),#38124,.F.); +#38113 = FACE_BOUND('',#38114,.F.); +#38114 = EDGE_LOOP('',(#38115,#38121,#38122,#38123)); +#38115 = ORIENTED_EDGE('',*,*,#38116,.T.); +#38116 = EDGE_CURVE('',#37566,#37658,#38117,.T.); +#38117 = LINE('',#38118,#38119); +#38118 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#38119 = VECTOR('',#38120,1.); +#38120 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38121 = ORIENTED_EDGE('',*,*,#37665,.T.); +#38122 = ORIENTED_EDGE('',*,*,#38099,.F.); +#38123 = ORIENTED_EDGE('',*,*,#37573,.F.); +#38124 = PLANE('',#38125); +#38125 = AXIS2_PLACEMENT_3D('',#38126,#38127,#38128); +#38126 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#38127 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38128 = DIRECTION('',(0.,0.,1.)); +#38129 = ADVANCED_FACE('',(#38130),#38141,.F.); +#38130 = FACE_BOUND('',#38131,.F.); +#38131 = EDGE_LOOP('',(#38132,#38138,#38139,#38140)); +#38132 = ORIENTED_EDGE('',*,*,#38133,.T.); +#38133 = EDGE_CURVE('',#37557,#37649,#38134,.T.); +#38134 = LINE('',#38135,#38136); +#38135 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#38136 = VECTOR('',#38137,1.); +#38137 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38138 = ORIENTED_EDGE('',*,*,#37657,.T.); +#38139 = ORIENTED_EDGE('',*,*,#38116,.F.); +#38140 = ORIENTED_EDGE('',*,*,#37565,.F.); +#38141 = PLANE('',#38142); +#38142 = AXIS2_PLACEMENT_3D('',#38143,#38144,#38145); +#38143 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#38144 = DIRECTION('',(0.,0.,1.)); +#38145 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#38146 = ADVANCED_FACE('',(#38147),#38153,.T.); +#38147 = FACE_BOUND('',#38148,.T.); +#38148 = EDGE_LOOP('',(#38149,#38150,#38151,#38152)); +#38149 = ORIENTED_EDGE('',*,*,#37556,.T.); +#38150 = ORIENTED_EDGE('',*,*,#38133,.T.); +#38151 = ORIENTED_EDGE('',*,*,#37648,.F.); +#38152 = ORIENTED_EDGE('',*,*,#37630,.F.); +#38153 = CYLINDRICAL_SURFACE('',#38154,0.25); +#38154 = AXIS2_PLACEMENT_3D('',#38155,#38156,#38157); +#38155 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#38156 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38157 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#38158 = ADVANCED_FACE('',(#38159),#38162,.F.); +#38159 = FACE_BOUND('',#38160,.T.); +#38160 = EDGE_LOOP('',(#38161)); +#38161 = ORIENTED_EDGE('',*,*,#37776,.F.); +#38162 = PLANE('',#38163); +#38163 = AXIS2_PLACEMENT_3D('',#38164,#38165,#38166); +#38164 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#38165 = DIRECTION('',(0.,0.,-1.)); +#38166 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#38171)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#38168,#38169,#38170)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#38168 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#38169 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#38170 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#38171 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#38168, + 'distance_accuracy_value','confusion accuracy'); +#38172 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#38173,#38175); +#38173 = ( REPRESENTATION_RELATIONSHIP('','',#36184,#36161) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#38174) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#38174 = ITEM_DEFINED_TRANSFORMATION('','',#11,#36162); +#38175 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #38176); +#38176 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','=>[0:1:1:21]','',#36156, + #36179,$); +#38177 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#36181)); +#38178 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#38179,#38181); +#38179 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#38180) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#38180 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83); +#38181 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #38182); +#38182 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','Rg','',#5,#523,$); +#38183 = SHAPE_DEFINITION_REPRESENTATION(#38184,#38190); +#38184 = PRODUCT_DEFINITION_SHAPE('','',#38185); +#38185 = PRODUCT_DEFINITION('design','',#38186,#38189); +#38186 = PRODUCT_DEFINITION_FORMATION('','',#38187); +#38187 = PRODUCT('SOIC-8_3.9x4.9mm_P1.27mm','SOIC-8_3.9x4.9mm_P1.27mm', + '',(#38188)); +#38188 = PRODUCT_CONTEXT('',#2,'mechanical'); +#38189 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#38190 = SHAPE_REPRESENTATION('',(#11,#38191),#38195); +#38191 = AXIS2_PLACEMENT_3D('',#38192,#38193,#38194); +#38192 = CARTESIAN_POINT('',(0.,0.,0.)); +#38193 = DIRECTION('',(0.,0.,1.)); +#38194 = DIRECTION('',(1.,0.,-0.)); +#38195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#38199)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#38196,#38197,#38198)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#38196 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#38197 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#38198 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#38199 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#38196, + 'distance_accuracy_value','confusion accuracy'); +#38200 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#38201,#38203); +#38201 = ( REPRESENTATION_RELATIONSHIP('','',#38190,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#38202) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#38202 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87); +#38203 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #38204); +#38204 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','Q7','',#5,#38185,$); +#38205 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#38187)); +#38206 = SHAPE_DEFINITION_REPRESENTATION(#38207,#38213); +#38207 = PRODUCT_DEFINITION_SHAPE('','',#38208); +#38208 = PRODUCT_DEFINITION('design','',#38209,#38212); +#38209 = PRODUCT_DEFINITION_FORMATION('','',#38210); +#38210 = PRODUCT('SOIC-8_3.9x4.9mm_P1.27mm','SOIC-8_3.9x4.9mm_P1.27mm', + '',(#38211)); +#38211 = PRODUCT_CONTEXT('',#2,'mechanical'); +#38212 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#38213 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#38214),#42682); +#38214 = MANIFOLD_SOLID_BREP('',#38215); +#38215 = CLOSED_SHELL('',(#38216,#38254,#38317,#38340,#38369,#38392, + #38479,#38566,#38589,#38612,#38629,#38652,#38740,#38756,#38786, + #38817,#38848,#38879,#38910,#38941,#38972,#39003,#39020,#39037, + #39068,#39099,#39130,#39161,#39192,#39223,#39254,#39284,#39307, + #39330,#39347,#39392,#39478,#39501,#39524,#39547,#39634,#39672, + #39721,#39813,#39838,#39922,#39944,#40036,#40061,#40145,#40167, + #40259,#40284,#40368,#40385,#40470,#40495,#40572,#40657,#40682, + #40759,#40776,#40868,#40893,#40977,#40999,#41091,#41116,#41200, + #41222,#41314,#41339,#41423,#41440,#41459,#41478,#41497,#41543, + #41559,#41578,#41597,#41616,#41632,#41649,#41661,#41678,#41695, + #41712,#41729,#41746,#41763,#41780,#41792,#41809,#41826,#41843, + #41860,#41877,#41894,#41911,#41923,#41940,#41957,#41974,#41991, + #42008,#42025,#42042,#42054,#42071,#42088,#42105,#42122,#42139, + #42156,#42168,#42185,#42202,#42219,#42236,#42253,#42270,#42282, + #42299,#42316,#42333,#42350,#42367,#42384,#42401,#42413,#42430, + #42447,#42464,#42481,#42498,#42515,#42532,#42544,#42561,#42578, + #42595,#42612,#42629,#42646,#42663,#42675)); +#38216 = ADVANCED_FACE('',(#38217),#38249,.F.); +#38217 = FACE_BOUND('',#38218,.F.); +#38218 = EDGE_LOOP('',(#38219,#38229,#38236,#38244)); +#38219 = ORIENTED_EDGE('',*,*,#38220,.T.); +#38220 = EDGE_CURVE('',#38221,#38223,#38225,.T.); +#38221 = VERTEX_POINT('',#38222); +#38222 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38223 = VERTEX_POINT('',#38224); +#38224 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38225 = LINE('',#38226,#38227); +#38226 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38227 = VECTOR('',#38228,1.); +#38228 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38229 = ORIENTED_EDGE('',*,*,#38230,.T.); +#38230 = EDGE_CURVE('',#38223,#38231,#38233,.T.); +#38231 = VERTEX_POINT('',#38232); +#38232 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38233 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38234,#38235),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38234 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38235 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38236 = ORIENTED_EDGE('',*,*,#38237,.F.); +#38237 = EDGE_CURVE('',#38238,#38231,#38240,.T.); +#38238 = VERTEX_POINT('',#38239); +#38239 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38240 = LINE('',#38241,#38242); +#38241 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38242 = VECTOR('',#38243,1.); +#38243 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38244 = ORIENTED_EDGE('',*,*,#38245,.F.); +#38245 = EDGE_CURVE('',#38221,#38238,#38246,.T.); +#38246 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38247,#38248),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38247 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38248 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38249 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38250,#38251) + ,(#38252,#38253 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38250 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38251 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38252 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38253 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38254 = ADVANCED_FACE('',(#38255),#38312,.F.); +#38255 = FACE_BOUND('',#38256,.T.); +#38256 = EDGE_LOOP('',(#38257,#38258,#38266,#38274,#38282,#38290,#38298, + #38306)); +#38257 = ORIENTED_EDGE('',*,*,#38220,.T.); +#38258 = ORIENTED_EDGE('',*,*,#38259,.T.); +#38259 = EDGE_CURVE('',#38223,#38260,#38262,.T.); +#38260 = VERTEX_POINT('',#38261); +#38261 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38262 = LINE('',#38263,#38264); +#38263 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38264 = VECTOR('',#38265,1.); +#38265 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38266 = ORIENTED_EDGE('',*,*,#38267,.T.); +#38267 = EDGE_CURVE('',#38260,#38268,#38270,.T.); +#38268 = VERTEX_POINT('',#38269); +#38269 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38270 = LINE('',#38271,#38272); +#38271 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38272 = VECTOR('',#38273,1.); +#38273 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38274 = ORIENTED_EDGE('',*,*,#38275,.T.); +#38275 = EDGE_CURVE('',#38268,#38276,#38278,.T.); +#38276 = VERTEX_POINT('',#38277); +#38277 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38278 = LINE('',#38279,#38280); +#38279 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38280 = VECTOR('',#38281,1.); +#38281 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#38282 = ORIENTED_EDGE('',*,*,#38283,.T.); +#38283 = EDGE_CURVE('',#38276,#38284,#38286,.T.); +#38284 = VERTEX_POINT('',#38285); +#38285 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38286 = LINE('',#38287,#38288); +#38287 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38288 = VECTOR('',#38289,1.); +#38289 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38290 = ORIENTED_EDGE('',*,*,#38291,.T.); +#38291 = EDGE_CURVE('',#38284,#38292,#38294,.T.); +#38292 = VERTEX_POINT('',#38293); +#38293 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38294 = LINE('',#38295,#38296); +#38295 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38296 = VECTOR('',#38297,1.); +#38297 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#38298 = ORIENTED_EDGE('',*,*,#38299,.T.); +#38299 = EDGE_CURVE('',#38292,#38300,#38302,.T.); +#38300 = VERTEX_POINT('',#38301); +#38301 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38302 = LINE('',#38303,#38304); +#38303 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38304 = VECTOR('',#38305,1.); +#38305 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38306 = ORIENTED_EDGE('',*,*,#38307,.T.); +#38307 = EDGE_CURVE('',#38300,#38221,#38308,.T.); +#38308 = LINE('',#38309,#38310); +#38309 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38310 = VECTOR('',#38311,1.); +#38311 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38312 = PLANE('',#38313); +#38313 = AXIS2_PLACEMENT_3D('',#38314,#38315,#38316); +#38314 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38315 = DIRECTION('',(0.,0.,1.)); +#38316 = DIRECTION('',(0.592513131498,-0.805560791625,0.)); +#38317 = ADVANCED_FACE('',(#38318),#38335,.F.); +#38318 = FACE_BOUND('',#38319,.F.); +#38319 = EDGE_LOOP('',(#38320,#38321,#38328,#38334)); +#38320 = ORIENTED_EDGE('',*,*,#38259,.T.); +#38321 = ORIENTED_EDGE('',*,*,#38322,.T.); +#38322 = EDGE_CURVE('',#38260,#38323,#38325,.T.); +#38323 = VERTEX_POINT('',#38324); +#38324 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38325 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38326,#38327),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38326 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38327 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38328 = ORIENTED_EDGE('',*,*,#38329,.F.); +#38329 = EDGE_CURVE('',#38231,#38323,#38330,.T.); +#38330 = LINE('',#38331,#38332); +#38331 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38332 = VECTOR('',#38333,1.); +#38333 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38334 = ORIENTED_EDGE('',*,*,#38230,.F.); +#38335 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38336,#38337) + ,(#38338,#38339 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38336 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#38337 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38338 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38339 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38340 = ADVANCED_FACE('',(#38341),#38364,.F.); +#38341 = FACE_BOUND('',#38342,.F.); +#38342 = EDGE_LOOP('',(#38343,#38344,#38351,#38359)); +#38343 = ORIENTED_EDGE('',*,*,#38237,.T.); +#38344 = ORIENTED_EDGE('',*,*,#38345,.T.); +#38345 = EDGE_CURVE('',#38231,#38346,#38348,.T.); +#38346 = VERTEX_POINT('',#38347); +#38347 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38348 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38349,#38350),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38349 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#38350 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38351 = ORIENTED_EDGE('',*,*,#38352,.F.); +#38352 = EDGE_CURVE('',#38353,#38346,#38355,.T.); +#38353 = VERTEX_POINT('',#38354); +#38354 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38355 = LINE('',#38356,#38357); +#38356 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38357 = VECTOR('',#38358,1.); +#38358 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38359 = ORIENTED_EDGE('',*,*,#38360,.F.); +#38360 = EDGE_CURVE('',#38238,#38353,#38361,.T.); +#38361 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38362,#38363),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38362 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38363 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38364 = PLANE('',#38365); +#38365 = AXIS2_PLACEMENT_3D('',#38366,#38367,#38368); +#38366 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#38367 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38368 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38369 = ADVANCED_FACE('',(#38370),#38387,.F.); +#38370 = FACE_BOUND('',#38371,.F.); +#38371 = EDGE_LOOP('',(#38372,#38373,#38374,#38382)); +#38372 = ORIENTED_EDGE('',*,*,#38307,.T.); +#38373 = ORIENTED_EDGE('',*,*,#38245,.T.); +#38374 = ORIENTED_EDGE('',*,*,#38375,.F.); +#38375 = EDGE_CURVE('',#38376,#38238,#38378,.T.); +#38376 = VERTEX_POINT('',#38377); +#38377 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38378 = LINE('',#38379,#38380); +#38379 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38380 = VECTOR('',#38381,1.); +#38381 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38382 = ORIENTED_EDGE('',*,*,#38383,.F.); +#38383 = EDGE_CURVE('',#38300,#38376,#38384,.T.); +#38384 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38385,#38386),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38385 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38386 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38387 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38388,#38389) + ,(#38390,#38391 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38388 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38389 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38390 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#38391 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#38392 = ADVANCED_FACE('',(#38393),#38474,.F.); +#38393 = FACE_BOUND('',#38394,.F.); +#38394 = EDGE_LOOP('',(#38395,#38396,#38397,#38405,#38413,#38421,#38429, + #38437,#38445,#38453,#38461,#38469)); +#38395 = ORIENTED_EDGE('',*,*,#38299,.T.); +#38396 = ORIENTED_EDGE('',*,*,#38383,.T.); +#38397 = ORIENTED_EDGE('',*,*,#38398,.F.); +#38398 = EDGE_CURVE('',#38399,#38376,#38401,.T.); +#38399 = VERTEX_POINT('',#38400); +#38400 = CARTESIAN_POINT('',(-1.95,2.11,0.825)); +#38401 = LINE('',#38402,#38403); +#38402 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38403 = VECTOR('',#38404,1.); +#38404 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38405 = ORIENTED_EDGE('',*,*,#38406,.F.); +#38406 = EDGE_CURVE('',#38407,#38399,#38409,.T.); +#38407 = VERTEX_POINT('',#38408); +#38408 = CARTESIAN_POINT('',(-1.95,1.7,0.825)); +#38409 = LINE('',#38410,#38411); +#38410 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38411 = VECTOR('',#38412,1.); +#38412 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38413 = ORIENTED_EDGE('',*,*,#38414,.F.); +#38414 = EDGE_CURVE('',#38415,#38407,#38417,.T.); +#38415 = VERTEX_POINT('',#38416); +#38416 = CARTESIAN_POINT('',(-1.95,0.84,0.825)); +#38417 = LINE('',#38418,#38419); +#38418 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38419 = VECTOR('',#38420,1.); +#38420 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38421 = ORIENTED_EDGE('',*,*,#38422,.F.); +#38422 = EDGE_CURVE('',#38423,#38415,#38425,.T.); +#38423 = VERTEX_POINT('',#38424); +#38424 = CARTESIAN_POINT('',(-1.95,0.43,0.825)); +#38425 = LINE('',#38426,#38427); +#38426 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38427 = VECTOR('',#38428,1.); +#38428 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38429 = ORIENTED_EDGE('',*,*,#38430,.F.); +#38430 = EDGE_CURVE('',#38431,#38423,#38433,.T.); +#38431 = VERTEX_POINT('',#38432); +#38432 = CARTESIAN_POINT('',(-1.95,-0.43,0.825)); +#38433 = LINE('',#38434,#38435); +#38434 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38435 = VECTOR('',#38436,1.); +#38436 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38437 = ORIENTED_EDGE('',*,*,#38438,.F.); +#38438 = EDGE_CURVE('',#38439,#38431,#38441,.T.); +#38439 = VERTEX_POINT('',#38440); +#38440 = CARTESIAN_POINT('',(-1.95,-0.84,0.825)); +#38441 = LINE('',#38442,#38443); +#38442 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38443 = VECTOR('',#38444,1.); +#38444 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38445 = ORIENTED_EDGE('',*,*,#38446,.F.); +#38446 = EDGE_CURVE('',#38447,#38439,#38449,.T.); +#38447 = VERTEX_POINT('',#38448); +#38448 = CARTESIAN_POINT('',(-1.95,-1.7,0.825)); +#38449 = LINE('',#38450,#38451); +#38450 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38451 = VECTOR('',#38452,1.); +#38452 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38453 = ORIENTED_EDGE('',*,*,#38454,.F.); +#38454 = EDGE_CURVE('',#38455,#38447,#38457,.T.); +#38455 = VERTEX_POINT('',#38456); +#38456 = CARTESIAN_POINT('',(-1.95,-2.11,0.825)); +#38457 = LINE('',#38458,#38459); +#38458 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38459 = VECTOR('',#38460,1.); +#38460 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38461 = ORIENTED_EDGE('',*,*,#38462,.F.); +#38462 = EDGE_CURVE('',#38463,#38455,#38465,.T.); +#38463 = VERTEX_POINT('',#38464); +#38464 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38465 = LINE('',#38466,#38467); +#38466 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38467 = VECTOR('',#38468,1.); +#38468 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38469 = ORIENTED_EDGE('',*,*,#38470,.F.); +#38470 = EDGE_CURVE('',#38292,#38463,#38471,.T.); +#38471 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38472,#38473),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38472 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38473 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38474 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38475,#38476) + ,(#38477,#38478 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38475 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38476 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38477 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#38478 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38479 = ADVANCED_FACE('',(#38480),#38561,.F.); +#38480 = FACE_BOUND('',#38481,.F.); +#38481 = EDGE_LOOP('',(#38482,#38483,#38490,#38498,#38506,#38514,#38522, + #38530,#38538,#38546,#38554,#38560)); +#38482 = ORIENTED_EDGE('',*,*,#38267,.T.); +#38483 = ORIENTED_EDGE('',*,*,#38484,.T.); +#38484 = EDGE_CURVE('',#38268,#38485,#38487,.T.); +#38485 = VERTEX_POINT('',#38486); +#38486 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38487 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38488,#38489),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38488 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38489 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38490 = ORIENTED_EDGE('',*,*,#38491,.F.); +#38491 = EDGE_CURVE('',#38492,#38485,#38494,.T.); +#38492 = VERTEX_POINT('',#38493); +#38493 = CARTESIAN_POINT('',(1.95,-2.11,0.825)); +#38494 = LINE('',#38495,#38496); +#38495 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38496 = VECTOR('',#38497,1.); +#38497 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38498 = ORIENTED_EDGE('',*,*,#38499,.F.); +#38499 = EDGE_CURVE('',#38500,#38492,#38502,.T.); +#38500 = VERTEX_POINT('',#38501); +#38501 = CARTESIAN_POINT('',(1.95,-1.7,0.825)); +#38502 = LINE('',#38503,#38504); +#38503 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38504 = VECTOR('',#38505,1.); +#38505 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38506 = ORIENTED_EDGE('',*,*,#38507,.F.); +#38507 = EDGE_CURVE('',#38508,#38500,#38510,.T.); +#38508 = VERTEX_POINT('',#38509); +#38509 = CARTESIAN_POINT('',(1.95,-0.84,0.825)); +#38510 = LINE('',#38511,#38512); +#38511 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38512 = VECTOR('',#38513,1.); +#38513 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38514 = ORIENTED_EDGE('',*,*,#38515,.F.); +#38515 = EDGE_CURVE('',#38516,#38508,#38518,.T.); +#38516 = VERTEX_POINT('',#38517); +#38517 = CARTESIAN_POINT('',(1.95,-0.43,0.825)); +#38518 = LINE('',#38519,#38520); +#38519 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38520 = VECTOR('',#38521,1.); +#38521 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38522 = ORIENTED_EDGE('',*,*,#38523,.F.); +#38523 = EDGE_CURVE('',#38524,#38516,#38526,.T.); +#38524 = VERTEX_POINT('',#38525); +#38525 = CARTESIAN_POINT('',(1.95,0.43,0.825)); +#38526 = LINE('',#38527,#38528); +#38527 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38528 = VECTOR('',#38529,1.); +#38529 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38530 = ORIENTED_EDGE('',*,*,#38531,.F.); +#38531 = EDGE_CURVE('',#38532,#38524,#38534,.T.); +#38532 = VERTEX_POINT('',#38533); +#38533 = CARTESIAN_POINT('',(1.95,0.84,0.825)); +#38534 = LINE('',#38535,#38536); +#38535 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38536 = VECTOR('',#38537,1.); +#38537 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38538 = ORIENTED_EDGE('',*,*,#38539,.F.); +#38539 = EDGE_CURVE('',#38540,#38532,#38542,.T.); +#38540 = VERTEX_POINT('',#38541); +#38541 = CARTESIAN_POINT('',(1.95,1.7,0.825)); +#38542 = LINE('',#38543,#38544); +#38543 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38544 = VECTOR('',#38545,1.); +#38545 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38546 = ORIENTED_EDGE('',*,*,#38547,.F.); +#38547 = EDGE_CURVE('',#38548,#38540,#38550,.T.); +#38548 = VERTEX_POINT('',#38549); +#38549 = CARTESIAN_POINT('',(1.95,2.11,0.825)); +#38550 = LINE('',#38551,#38552); +#38551 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38552 = VECTOR('',#38553,1.); +#38553 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38554 = ORIENTED_EDGE('',*,*,#38555,.F.); +#38555 = EDGE_CURVE('',#38323,#38548,#38556,.T.); +#38556 = LINE('',#38557,#38558); +#38557 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38558 = VECTOR('',#38559,1.); +#38559 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38560 = ORIENTED_EDGE('',*,*,#38322,.F.); +#38561 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38562,#38563) + ,(#38564,#38565 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38562 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#38563 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38564 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38565 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38566 = ADVANCED_FACE('',(#38567),#38584,.F.); +#38567 = FACE_BOUND('',#38568,.F.); +#38568 = EDGE_LOOP('',(#38569,#38570,#38571,#38579)); +#38569 = ORIENTED_EDGE('',*,*,#38291,.T.); +#38570 = ORIENTED_EDGE('',*,*,#38470,.T.); +#38571 = ORIENTED_EDGE('',*,*,#38572,.F.); +#38572 = EDGE_CURVE('',#38573,#38463,#38575,.T.); +#38573 = VERTEX_POINT('',#38574); +#38574 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38575 = LINE('',#38576,#38577); +#38576 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38577 = VECTOR('',#38578,1.); +#38578 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#38579 = ORIENTED_EDGE('',*,*,#38580,.F.); +#38580 = EDGE_CURVE('',#38284,#38573,#38581,.T.); +#38581 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38582,#38583),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38582 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38583 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38584 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38585,#38586) + ,(#38587,#38588 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38585 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38586 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38587 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#38588 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38589 = ADVANCED_FACE('',(#38590),#38607,.F.); +#38590 = FACE_BOUND('',#38591,.F.); +#38591 = EDGE_LOOP('',(#38592,#38593,#38600,#38606)); +#38592 = ORIENTED_EDGE('',*,*,#38275,.T.); +#38593 = ORIENTED_EDGE('',*,*,#38594,.T.); +#38594 = EDGE_CURVE('',#38276,#38595,#38597,.T.); +#38595 = VERTEX_POINT('',#38596); +#38596 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38597 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38598,#38599),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38598 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38599 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38600 = ORIENTED_EDGE('',*,*,#38601,.F.); +#38601 = EDGE_CURVE('',#38485,#38595,#38602,.T.); +#38602 = LINE('',#38603,#38604); +#38603 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38604 = VECTOR('',#38605,1.); +#38605 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#38606 = ORIENTED_EDGE('',*,*,#38484,.F.); +#38607 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38608,#38609) + ,(#38610,#38611 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#38608 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#38609 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#38610 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38611 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38612 = ADVANCED_FACE('',(#38613),#38624,.F.); +#38613 = FACE_BOUND('',#38614,.F.); +#38614 = EDGE_LOOP('',(#38615,#38616,#38617,#38623)); +#38615 = ORIENTED_EDGE('',*,*,#38283,.T.); +#38616 = ORIENTED_EDGE('',*,*,#38580,.T.); +#38617 = ORIENTED_EDGE('',*,*,#38618,.F.); +#38618 = EDGE_CURVE('',#38595,#38573,#38619,.T.); +#38619 = LINE('',#38620,#38621); +#38620 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38621 = VECTOR('',#38622,1.); +#38622 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38623 = ORIENTED_EDGE('',*,*,#38594,.F.); +#38624 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#38625,#38626) + ,(#38627,#38628 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#38625 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#38626 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#38627 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#38628 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#38629 = ADVANCED_FACE('',(#38630),#38647,.F.); +#38630 = FACE_BOUND('',#38631,.F.); +#38631 = EDGE_LOOP('',(#38632,#38633,#38640,#38646)); +#38632 = ORIENTED_EDGE('',*,*,#38329,.T.); +#38633 = ORIENTED_EDGE('',*,*,#38634,.T.); +#38634 = EDGE_CURVE('',#38323,#38635,#38637,.T.); +#38635 = VERTEX_POINT('',#38636); +#38636 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#38637 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38638,#38639),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38638 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#38639 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#38640 = ORIENTED_EDGE('',*,*,#38641,.F.); +#38641 = EDGE_CURVE('',#38346,#38635,#38642,.T.); +#38642 = LINE('',#38643,#38644); +#38643 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38644 = VECTOR('',#38645,1.); +#38645 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38646 = ORIENTED_EDGE('',*,*,#38345,.F.); +#38647 = PLANE('',#38648); +#38648 = AXIS2_PLACEMENT_3D('',#38649,#38650,#38651); +#38649 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#38650 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#38651 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38652 = ADVANCED_FACE('',(#38653),#38735,.F.); +#38653 = FACE_BOUND('',#38654,.F.); +#38654 = EDGE_LOOP('',(#38655,#38663,#38664,#38665,#38673,#38681,#38689, + #38697,#38705,#38713,#38721,#38729)); +#38655 = ORIENTED_EDGE('',*,*,#38656,.T.); +#38656 = EDGE_CURVE('',#38657,#38353,#38659,.T.); +#38657 = VERTEX_POINT('',#38658); +#38658 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38659 = LINE('',#38660,#38661); +#38660 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38661 = VECTOR('',#38662,1.); +#38662 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38663 = ORIENTED_EDGE('',*,*,#38352,.T.); +#38664 = ORIENTED_EDGE('',*,*,#38641,.T.); +#38665 = ORIENTED_EDGE('',*,*,#38666,.T.); +#38666 = EDGE_CURVE('',#38635,#38667,#38669,.T.); +#38667 = VERTEX_POINT('',#38668); +#38668 = CARTESIAN_POINT('',(1.95,2.11,1.025)); +#38669 = LINE('',#38670,#38671); +#38670 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#38671 = VECTOR('',#38672,1.); +#38672 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38673 = ORIENTED_EDGE('',*,*,#38674,.T.); +#38674 = EDGE_CURVE('',#38667,#38675,#38677,.T.); +#38675 = VERTEX_POINT('',#38676); +#38676 = CARTESIAN_POINT('',(1.875,2.11,1.025)); +#38677 = LINE('',#38678,#38679); +#38678 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#38679 = VECTOR('',#38680,1.); +#38680 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#38681 = ORIENTED_EDGE('',*,*,#38682,.F.); +#38682 = EDGE_CURVE('',#38683,#38675,#38685,.T.); +#38683 = VERTEX_POINT('',#38684); +#38684 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#38685 = LINE('',#38686,#38687); +#38686 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#38687 = VECTOR('',#38688,1.); +#38688 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#38689 = ORIENTED_EDGE('',*,*,#38690,.F.); +#38690 = EDGE_CURVE('',#38691,#38683,#38693,.T.); +#38691 = VERTEX_POINT('',#38692); +#38692 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#38693 = LINE('',#38694,#38695); +#38694 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#38695 = VECTOR('',#38696,1.); +#38696 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38697 = ORIENTED_EDGE('',*,*,#38698,.F.); +#38698 = EDGE_CURVE('',#38699,#38691,#38701,.T.); +#38699 = VERTEX_POINT('',#38700); +#38700 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#38701 = LINE('',#38702,#38703); +#38702 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#38703 = VECTOR('',#38704,1.); +#38704 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38705 = ORIENTED_EDGE('',*,*,#38706,.F.); +#38706 = EDGE_CURVE('',#38707,#38699,#38709,.T.); +#38707 = VERTEX_POINT('',#38708); +#38708 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#38709 = LINE('',#38710,#38711); +#38710 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#38711 = VECTOR('',#38712,1.); +#38712 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38713 = ORIENTED_EDGE('',*,*,#38714,.F.); +#38714 = EDGE_CURVE('',#38715,#38707,#38717,.T.); +#38715 = VERTEX_POINT('',#38716); +#38716 = CARTESIAN_POINT('',(-1.875,2.11,1.025)); +#38717 = LINE('',#38718,#38719); +#38718 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#38719 = VECTOR('',#38720,1.); +#38720 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38721 = ORIENTED_EDGE('',*,*,#38722,.F.); +#38722 = EDGE_CURVE('',#38723,#38715,#38725,.T.); +#38723 = VERTEX_POINT('',#38724); +#38724 = CARTESIAN_POINT('',(-1.95,2.11,1.025)); +#38725 = LINE('',#38726,#38727); +#38726 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#38727 = VECTOR('',#38728,1.); +#38728 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#38729 = ORIENTED_EDGE('',*,*,#38730,.T.); +#38730 = EDGE_CURVE('',#38723,#38657,#38731,.T.); +#38731 = LINE('',#38732,#38733); +#38732 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38733 = VECTOR('',#38734,1.); +#38734 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38735 = PLANE('',#38736); +#38736 = AXIS2_PLACEMENT_3D('',#38737,#38738,#38739); +#38737 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#38738 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#38739 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#38740 = ADVANCED_FACE('',(#38741),#38751,.F.); +#38741 = FACE_BOUND('',#38742,.F.); +#38742 = EDGE_LOOP('',(#38743,#38744,#38745,#38746)); +#38743 = ORIENTED_EDGE('',*,*,#38375,.T.); +#38744 = ORIENTED_EDGE('',*,*,#38360,.T.); +#38745 = ORIENTED_EDGE('',*,*,#38656,.F.); +#38746 = ORIENTED_EDGE('',*,*,#38747,.F.); +#38747 = EDGE_CURVE('',#38376,#38657,#38748,.T.); +#38748 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38749,#38750),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38749 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#38750 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38751 = PLANE('',#38752); +#38752 = AXIS2_PLACEMENT_3D('',#38753,#38754,#38755); +#38753 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#38754 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#38755 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#38756 = ADVANCED_FACE('',(#38757),#38781,.F.); +#38757 = FACE_BOUND('',#38758,.F.); +#38758 = EDGE_LOOP('',(#38759,#38766,#38767,#38775)); +#38759 = ORIENTED_EDGE('',*,*,#38760,.F.); +#38760 = EDGE_CURVE('',#38463,#38761,#38763,.T.); +#38761 = VERTEX_POINT('',#38762); +#38762 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38763 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38764,#38765),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#38764 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#38765 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38766 = ORIENTED_EDGE('',*,*,#38462,.T.); +#38767 = ORIENTED_EDGE('',*,*,#38768,.T.); +#38768 = EDGE_CURVE('',#38455,#38769,#38771,.T.); +#38769 = VERTEX_POINT('',#38770); +#38770 = CARTESIAN_POINT('',(-1.95,-2.11,1.025)); +#38771 = LINE('',#38772,#38773); +#38772 = CARTESIAN_POINT('',(-1.95,-2.11,0.786976568901)); +#38773 = VECTOR('',#38774,1.); +#38774 = DIRECTION('',(0.,0.,1.)); +#38775 = ORIENTED_EDGE('',*,*,#38776,.F.); +#38776 = EDGE_CURVE('',#38761,#38769,#38777,.T.); +#38777 = LINE('',#38778,#38779); +#38778 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38779 = VECTOR('',#38780,1.); +#38780 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38781 = PLANE('',#38782); +#38782 = AXIS2_PLACEMENT_3D('',#38783,#38784,#38785); +#38783 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38784 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38785 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38786 = ADVANCED_FACE('',(#38787),#38812,.F.); +#38787 = FACE_BOUND('',#38788,.F.); +#38788 = EDGE_LOOP('',(#38789,#38797,#38798,#38806)); +#38789 = ORIENTED_EDGE('',*,*,#38790,.F.); +#38790 = EDGE_CURVE('',#38455,#38791,#38793,.T.); +#38791 = VERTEX_POINT('',#38792); +#38792 = CARTESIAN_POINT('',(-2.25,-2.11,0.825)); +#38793 = LINE('',#38794,#38795); +#38794 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#38795 = VECTOR('',#38796,1.); +#38796 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38797 = ORIENTED_EDGE('',*,*,#38454,.T.); +#38798 = ORIENTED_EDGE('',*,*,#38799,.T.); +#38799 = EDGE_CURVE('',#38447,#38800,#38802,.T.); +#38800 = VERTEX_POINT('',#38801); +#38801 = CARTESIAN_POINT('',(-2.25,-1.7,0.825)); +#38802 = LINE('',#38803,#38804); +#38803 = CARTESIAN_POINT('',(-1.8,-1.7,0.825)); +#38804 = VECTOR('',#38805,1.); +#38805 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38806 = ORIENTED_EDGE('',*,*,#38807,.F.); +#38807 = EDGE_CURVE('',#38791,#38800,#38808,.T.); +#38808 = LINE('',#38809,#38810); +#38809 = CARTESIAN_POINT('',(-2.25,-2.11,0.825)); +#38810 = VECTOR('',#38811,1.); +#38811 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38812 = PLANE('',#38813); +#38813 = AXIS2_PLACEMENT_3D('',#38814,#38815,#38816); +#38814 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#38815 = DIRECTION('',(0.,0.,1.)); +#38816 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38817 = ADVANCED_FACE('',(#38818),#38843,.F.); +#38818 = FACE_BOUND('',#38819,.F.); +#38819 = EDGE_LOOP('',(#38820,#38828,#38829,#38837)); +#38820 = ORIENTED_EDGE('',*,*,#38821,.F.); +#38821 = EDGE_CURVE('',#38447,#38822,#38824,.T.); +#38822 = VERTEX_POINT('',#38823); +#38823 = CARTESIAN_POINT('',(-1.95,-1.7,1.025)); +#38824 = LINE('',#38825,#38826); +#38825 = CARTESIAN_POINT('',(-1.95,-1.7,0.786976568901)); +#38826 = VECTOR('',#38827,1.); +#38827 = DIRECTION('',(0.,0.,1.)); +#38828 = ORIENTED_EDGE('',*,*,#38446,.T.); +#38829 = ORIENTED_EDGE('',*,*,#38830,.T.); +#38830 = EDGE_CURVE('',#38439,#38831,#38833,.T.); +#38831 = VERTEX_POINT('',#38832); +#38832 = CARTESIAN_POINT('',(-1.95,-0.84,1.025)); +#38833 = LINE('',#38834,#38835); +#38834 = CARTESIAN_POINT('',(-1.95,-0.84,0.786976568901)); +#38835 = VECTOR('',#38836,1.); +#38836 = DIRECTION('',(0.,0.,1.)); +#38837 = ORIENTED_EDGE('',*,*,#38838,.F.); +#38838 = EDGE_CURVE('',#38822,#38831,#38839,.T.); +#38839 = LINE('',#38840,#38841); +#38840 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38841 = VECTOR('',#38842,1.); +#38842 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38843 = PLANE('',#38844); +#38844 = AXIS2_PLACEMENT_3D('',#38845,#38846,#38847); +#38845 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38846 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38847 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38848 = ADVANCED_FACE('',(#38849),#38874,.F.); +#38849 = FACE_BOUND('',#38850,.F.); +#38850 = EDGE_LOOP('',(#38851,#38859,#38860,#38868)); +#38851 = ORIENTED_EDGE('',*,*,#38852,.F.); +#38852 = EDGE_CURVE('',#38439,#38853,#38855,.T.); +#38853 = VERTEX_POINT('',#38854); +#38854 = CARTESIAN_POINT('',(-2.25,-0.84,0.825)); +#38855 = LINE('',#38856,#38857); +#38856 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#38857 = VECTOR('',#38858,1.); +#38858 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38859 = ORIENTED_EDGE('',*,*,#38438,.T.); +#38860 = ORIENTED_EDGE('',*,*,#38861,.T.); +#38861 = EDGE_CURVE('',#38431,#38862,#38864,.T.); +#38862 = VERTEX_POINT('',#38863); +#38863 = CARTESIAN_POINT('',(-2.25,-0.43,0.825)); +#38864 = LINE('',#38865,#38866); +#38865 = CARTESIAN_POINT('',(-1.8,-0.43,0.825)); +#38866 = VECTOR('',#38867,1.); +#38867 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38868 = ORIENTED_EDGE('',*,*,#38869,.F.); +#38869 = EDGE_CURVE('',#38853,#38862,#38870,.T.); +#38870 = LINE('',#38871,#38872); +#38871 = CARTESIAN_POINT('',(-2.25,-0.84,0.825)); +#38872 = VECTOR('',#38873,1.); +#38873 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38874 = PLANE('',#38875); +#38875 = AXIS2_PLACEMENT_3D('',#38876,#38877,#38878); +#38876 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#38877 = DIRECTION('',(0.,0.,1.)); +#38878 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38879 = ADVANCED_FACE('',(#38880),#38905,.F.); +#38880 = FACE_BOUND('',#38881,.F.); +#38881 = EDGE_LOOP('',(#38882,#38890,#38891,#38899)); +#38882 = ORIENTED_EDGE('',*,*,#38883,.F.); +#38883 = EDGE_CURVE('',#38431,#38884,#38886,.T.); +#38884 = VERTEX_POINT('',#38885); +#38885 = CARTESIAN_POINT('',(-1.95,-0.43,1.025)); +#38886 = LINE('',#38887,#38888); +#38887 = CARTESIAN_POINT('',(-1.95,-0.43,0.786976568901)); +#38888 = VECTOR('',#38889,1.); +#38889 = DIRECTION('',(0.,0.,1.)); +#38890 = ORIENTED_EDGE('',*,*,#38430,.T.); +#38891 = ORIENTED_EDGE('',*,*,#38892,.T.); +#38892 = EDGE_CURVE('',#38423,#38893,#38895,.T.); +#38893 = VERTEX_POINT('',#38894); +#38894 = CARTESIAN_POINT('',(-1.95,0.43,1.025)); +#38895 = LINE('',#38896,#38897); +#38896 = CARTESIAN_POINT('',(-1.95,0.43,0.786976568901)); +#38897 = VECTOR('',#38898,1.); +#38898 = DIRECTION('',(0.,0.,1.)); +#38899 = ORIENTED_EDGE('',*,*,#38900,.F.); +#38900 = EDGE_CURVE('',#38884,#38893,#38901,.T.); +#38901 = LINE('',#38902,#38903); +#38902 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38903 = VECTOR('',#38904,1.); +#38904 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38905 = PLANE('',#38906); +#38906 = AXIS2_PLACEMENT_3D('',#38907,#38908,#38909); +#38907 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38908 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38909 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38910 = ADVANCED_FACE('',(#38911),#38936,.F.); +#38911 = FACE_BOUND('',#38912,.F.); +#38912 = EDGE_LOOP('',(#38913,#38921,#38922,#38930)); +#38913 = ORIENTED_EDGE('',*,*,#38914,.F.); +#38914 = EDGE_CURVE('',#38423,#38915,#38917,.T.); +#38915 = VERTEX_POINT('',#38916); +#38916 = CARTESIAN_POINT('',(-2.25,0.43,0.825)); +#38917 = LINE('',#38918,#38919); +#38918 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#38919 = VECTOR('',#38920,1.); +#38920 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38921 = ORIENTED_EDGE('',*,*,#38422,.T.); +#38922 = ORIENTED_EDGE('',*,*,#38923,.T.); +#38923 = EDGE_CURVE('',#38415,#38924,#38926,.T.); +#38924 = VERTEX_POINT('',#38925); +#38925 = CARTESIAN_POINT('',(-2.25,0.84,0.825)); +#38926 = LINE('',#38927,#38928); +#38927 = CARTESIAN_POINT('',(-1.8,0.84,0.825)); +#38928 = VECTOR('',#38929,1.); +#38929 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38930 = ORIENTED_EDGE('',*,*,#38931,.F.); +#38931 = EDGE_CURVE('',#38915,#38924,#38932,.T.); +#38932 = LINE('',#38933,#38934); +#38933 = CARTESIAN_POINT('',(-2.25,0.43,0.825)); +#38934 = VECTOR('',#38935,1.); +#38935 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38936 = PLANE('',#38937); +#38937 = AXIS2_PLACEMENT_3D('',#38938,#38939,#38940); +#38938 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#38939 = DIRECTION('',(0.,0.,1.)); +#38940 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38941 = ADVANCED_FACE('',(#38942),#38967,.F.); +#38942 = FACE_BOUND('',#38943,.F.); +#38943 = EDGE_LOOP('',(#38944,#38952,#38953,#38961)); +#38944 = ORIENTED_EDGE('',*,*,#38945,.F.); +#38945 = EDGE_CURVE('',#38415,#38946,#38948,.T.); +#38946 = VERTEX_POINT('',#38947); +#38947 = CARTESIAN_POINT('',(-1.95,0.84,1.025)); +#38948 = LINE('',#38949,#38950); +#38949 = CARTESIAN_POINT('',(-1.95,0.84,0.786976568901)); +#38950 = VECTOR('',#38951,1.); +#38951 = DIRECTION('',(0.,0.,1.)); +#38952 = ORIENTED_EDGE('',*,*,#38414,.T.); +#38953 = ORIENTED_EDGE('',*,*,#38954,.T.); +#38954 = EDGE_CURVE('',#38407,#38955,#38957,.T.); +#38955 = VERTEX_POINT('',#38956); +#38956 = CARTESIAN_POINT('',(-1.95,1.7,1.025)); +#38957 = LINE('',#38958,#38959); +#38958 = CARTESIAN_POINT('',(-1.95,1.7,0.786976568901)); +#38959 = VECTOR('',#38960,1.); +#38960 = DIRECTION('',(0.,0.,1.)); +#38961 = ORIENTED_EDGE('',*,*,#38962,.F.); +#38962 = EDGE_CURVE('',#38946,#38955,#38963,.T.); +#38963 = LINE('',#38964,#38965); +#38964 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38965 = VECTOR('',#38966,1.); +#38966 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38967 = PLANE('',#38968); +#38968 = AXIS2_PLACEMENT_3D('',#38969,#38970,#38971); +#38969 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#38970 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#38971 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#38972 = ADVANCED_FACE('',(#38973),#38998,.F.); +#38973 = FACE_BOUND('',#38974,.F.); +#38974 = EDGE_LOOP('',(#38975,#38983,#38984,#38992)); +#38975 = ORIENTED_EDGE('',*,*,#38976,.F.); +#38976 = EDGE_CURVE('',#38407,#38977,#38979,.T.); +#38977 = VERTEX_POINT('',#38978); +#38978 = CARTESIAN_POINT('',(-2.25,1.7,0.825)); +#38979 = LINE('',#38980,#38981); +#38980 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#38981 = VECTOR('',#38982,1.); +#38982 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38983 = ORIENTED_EDGE('',*,*,#38406,.T.); +#38984 = ORIENTED_EDGE('',*,*,#38985,.T.); +#38985 = EDGE_CURVE('',#38399,#38986,#38988,.T.); +#38986 = VERTEX_POINT('',#38987); +#38987 = CARTESIAN_POINT('',(-2.25,2.11,0.825)); +#38988 = LINE('',#38989,#38990); +#38989 = CARTESIAN_POINT('',(-1.8,2.11,0.825)); +#38990 = VECTOR('',#38991,1.); +#38991 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#38992 = ORIENTED_EDGE('',*,*,#38993,.F.); +#38993 = EDGE_CURVE('',#38977,#38986,#38994,.T.); +#38994 = LINE('',#38995,#38996); +#38995 = CARTESIAN_POINT('',(-2.25,1.7,0.825)); +#38996 = VECTOR('',#38997,1.); +#38997 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#38998 = PLANE('',#38999); +#38999 = AXIS2_PLACEMENT_3D('',#39000,#39001,#39002); +#39000 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#39001 = DIRECTION('',(0.,0.,1.)); +#39002 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39003 = ADVANCED_FACE('',(#39004),#39015,.F.); +#39004 = FACE_BOUND('',#39005,.F.); +#39005 = EDGE_LOOP('',(#39006,#39012,#39013,#39014)); +#39006 = ORIENTED_EDGE('',*,*,#39007,.F.); +#39007 = EDGE_CURVE('',#38399,#38723,#39008,.T.); +#39008 = LINE('',#39009,#39010); +#39009 = CARTESIAN_POINT('',(-1.95,2.11,0.786976568901)); +#39010 = VECTOR('',#39011,1.); +#39011 = DIRECTION('',(0.,0.,1.)); +#39012 = ORIENTED_EDGE('',*,*,#38398,.T.); +#39013 = ORIENTED_EDGE('',*,*,#38747,.T.); +#39014 = ORIENTED_EDGE('',*,*,#38730,.F.); +#39015 = PLANE('',#39016); +#39016 = AXIS2_PLACEMENT_3D('',#39017,#39018,#39019); +#39017 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#39018 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39019 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39020 = ADVANCED_FACE('',(#39021),#39032,.F.); +#39021 = FACE_BOUND('',#39022,.F.); +#39022 = EDGE_LOOP('',(#39023,#39024,#39025,#39031)); +#39023 = ORIENTED_EDGE('',*,*,#38634,.F.); +#39024 = ORIENTED_EDGE('',*,*,#38555,.T.); +#39025 = ORIENTED_EDGE('',*,*,#39026,.T.); +#39026 = EDGE_CURVE('',#38548,#38667,#39027,.T.); +#39027 = LINE('',#39028,#39029); +#39028 = CARTESIAN_POINT('',(1.95,2.11,0.786976568901)); +#39029 = VECTOR('',#39030,1.); +#39030 = DIRECTION('',(0.,0.,1.)); +#39031 = ORIENTED_EDGE('',*,*,#38666,.F.); +#39032 = PLANE('',#39033); +#39033 = AXIS2_PLACEMENT_3D('',#39034,#39035,#39036); +#39034 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39035 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39036 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39037 = ADVANCED_FACE('',(#39038),#39063,.F.); +#39038 = FACE_BOUND('',#39039,.F.); +#39039 = EDGE_LOOP('',(#39040,#39048,#39049,#39057)); +#39040 = ORIENTED_EDGE('',*,*,#39041,.F.); +#39041 = EDGE_CURVE('',#38548,#39042,#39044,.T.); +#39042 = VERTEX_POINT('',#39043); +#39043 = CARTESIAN_POINT('',(2.25,2.11,0.825)); +#39044 = LINE('',#39045,#39046); +#39045 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#39046 = VECTOR('',#39047,1.); +#39047 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39048 = ORIENTED_EDGE('',*,*,#38547,.T.); +#39049 = ORIENTED_EDGE('',*,*,#39050,.T.); +#39050 = EDGE_CURVE('',#38540,#39051,#39053,.T.); +#39051 = VERTEX_POINT('',#39052); +#39052 = CARTESIAN_POINT('',(2.25,1.7,0.825)); +#39053 = LINE('',#39054,#39055); +#39054 = CARTESIAN_POINT('',(1.8,1.7,0.825)); +#39055 = VECTOR('',#39056,1.); +#39056 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39057 = ORIENTED_EDGE('',*,*,#39058,.F.); +#39058 = EDGE_CURVE('',#39042,#39051,#39059,.T.); +#39059 = LINE('',#39060,#39061); +#39060 = CARTESIAN_POINT('',(2.25,2.11,0.825)); +#39061 = VECTOR('',#39062,1.); +#39062 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39063 = PLANE('',#39064); +#39064 = AXIS2_PLACEMENT_3D('',#39065,#39066,#39067); +#39065 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#39066 = DIRECTION('',(0.,0.,1.)); +#39067 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39068 = ADVANCED_FACE('',(#39069),#39094,.F.); +#39069 = FACE_BOUND('',#39070,.F.); +#39070 = EDGE_LOOP('',(#39071,#39079,#39080,#39088)); +#39071 = ORIENTED_EDGE('',*,*,#39072,.F.); +#39072 = EDGE_CURVE('',#38540,#39073,#39075,.T.); +#39073 = VERTEX_POINT('',#39074); +#39074 = CARTESIAN_POINT('',(1.95,1.7,1.025)); +#39075 = LINE('',#39076,#39077); +#39076 = CARTESIAN_POINT('',(1.95,1.7,0.786976568901)); +#39077 = VECTOR('',#39078,1.); +#39078 = DIRECTION('',(0.,0.,1.)); +#39079 = ORIENTED_EDGE('',*,*,#38539,.T.); +#39080 = ORIENTED_EDGE('',*,*,#39081,.T.); +#39081 = EDGE_CURVE('',#38532,#39082,#39084,.T.); +#39082 = VERTEX_POINT('',#39083); +#39083 = CARTESIAN_POINT('',(1.95,0.84,1.025)); +#39084 = LINE('',#39085,#39086); +#39085 = CARTESIAN_POINT('',(1.95,0.84,0.786976568901)); +#39086 = VECTOR('',#39087,1.); +#39087 = DIRECTION('',(0.,0.,1.)); +#39088 = ORIENTED_EDGE('',*,*,#39089,.F.); +#39089 = EDGE_CURVE('',#39073,#39082,#39090,.T.); +#39090 = LINE('',#39091,#39092); +#39091 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39092 = VECTOR('',#39093,1.); +#39093 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39094 = PLANE('',#39095); +#39095 = AXIS2_PLACEMENT_3D('',#39096,#39097,#39098); +#39096 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39097 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39098 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39099 = ADVANCED_FACE('',(#39100),#39125,.F.); +#39100 = FACE_BOUND('',#39101,.F.); +#39101 = EDGE_LOOP('',(#39102,#39110,#39111,#39119)); +#39102 = ORIENTED_EDGE('',*,*,#39103,.F.); +#39103 = EDGE_CURVE('',#38532,#39104,#39106,.T.); +#39104 = VERTEX_POINT('',#39105); +#39105 = CARTESIAN_POINT('',(2.25,0.84,0.825)); +#39106 = LINE('',#39107,#39108); +#39107 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#39108 = VECTOR('',#39109,1.); +#39109 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39110 = ORIENTED_EDGE('',*,*,#38531,.T.); +#39111 = ORIENTED_EDGE('',*,*,#39112,.T.); +#39112 = EDGE_CURVE('',#38524,#39113,#39115,.T.); +#39113 = VERTEX_POINT('',#39114); +#39114 = CARTESIAN_POINT('',(2.25,0.43,0.825)); +#39115 = LINE('',#39116,#39117); +#39116 = CARTESIAN_POINT('',(1.8,0.43,0.825)); +#39117 = VECTOR('',#39118,1.); +#39118 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39119 = ORIENTED_EDGE('',*,*,#39120,.F.); +#39120 = EDGE_CURVE('',#39104,#39113,#39121,.T.); +#39121 = LINE('',#39122,#39123); +#39122 = CARTESIAN_POINT('',(2.25,0.84,0.825)); +#39123 = VECTOR('',#39124,1.); +#39124 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39125 = PLANE('',#39126); +#39126 = AXIS2_PLACEMENT_3D('',#39127,#39128,#39129); +#39127 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#39128 = DIRECTION('',(0.,0.,1.)); +#39129 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39130 = ADVANCED_FACE('',(#39131),#39156,.F.); +#39131 = FACE_BOUND('',#39132,.F.); +#39132 = EDGE_LOOP('',(#39133,#39141,#39142,#39150)); +#39133 = ORIENTED_EDGE('',*,*,#39134,.F.); +#39134 = EDGE_CURVE('',#38524,#39135,#39137,.T.); +#39135 = VERTEX_POINT('',#39136); +#39136 = CARTESIAN_POINT('',(1.95,0.43,1.025)); +#39137 = LINE('',#39138,#39139); +#39138 = CARTESIAN_POINT('',(1.95,0.43,0.786976568901)); +#39139 = VECTOR('',#39140,1.); +#39140 = DIRECTION('',(0.,0.,1.)); +#39141 = ORIENTED_EDGE('',*,*,#38523,.T.); +#39142 = ORIENTED_EDGE('',*,*,#39143,.T.); +#39143 = EDGE_CURVE('',#38516,#39144,#39146,.T.); +#39144 = VERTEX_POINT('',#39145); +#39145 = CARTESIAN_POINT('',(1.95,-0.43,1.025)); +#39146 = LINE('',#39147,#39148); +#39147 = CARTESIAN_POINT('',(1.95,-0.43,0.786976568901)); +#39148 = VECTOR('',#39149,1.); +#39149 = DIRECTION('',(0.,0.,1.)); +#39150 = ORIENTED_EDGE('',*,*,#39151,.F.); +#39151 = EDGE_CURVE('',#39135,#39144,#39152,.T.); +#39152 = LINE('',#39153,#39154); +#39153 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39154 = VECTOR('',#39155,1.); +#39155 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39156 = PLANE('',#39157); +#39157 = AXIS2_PLACEMENT_3D('',#39158,#39159,#39160); +#39158 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39159 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39160 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39161 = ADVANCED_FACE('',(#39162),#39187,.F.); +#39162 = FACE_BOUND('',#39163,.F.); +#39163 = EDGE_LOOP('',(#39164,#39172,#39173,#39181)); +#39164 = ORIENTED_EDGE('',*,*,#39165,.F.); +#39165 = EDGE_CURVE('',#38516,#39166,#39168,.T.); +#39166 = VERTEX_POINT('',#39167); +#39167 = CARTESIAN_POINT('',(2.25,-0.43,0.825)); +#39168 = LINE('',#39169,#39170); +#39169 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#39170 = VECTOR('',#39171,1.); +#39171 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39172 = ORIENTED_EDGE('',*,*,#38515,.T.); +#39173 = ORIENTED_EDGE('',*,*,#39174,.T.); +#39174 = EDGE_CURVE('',#38508,#39175,#39177,.T.); +#39175 = VERTEX_POINT('',#39176); +#39176 = CARTESIAN_POINT('',(2.25,-0.84,0.825)); +#39177 = LINE('',#39178,#39179); +#39178 = CARTESIAN_POINT('',(1.8,-0.84,0.825)); +#39179 = VECTOR('',#39180,1.); +#39180 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39181 = ORIENTED_EDGE('',*,*,#39182,.F.); +#39182 = EDGE_CURVE('',#39166,#39175,#39183,.T.); +#39183 = LINE('',#39184,#39185); +#39184 = CARTESIAN_POINT('',(2.25,-0.43,0.825)); +#39185 = VECTOR('',#39186,1.); +#39186 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39187 = PLANE('',#39188); +#39188 = AXIS2_PLACEMENT_3D('',#39189,#39190,#39191); +#39189 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#39190 = DIRECTION('',(0.,0.,1.)); +#39191 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39192 = ADVANCED_FACE('',(#39193),#39218,.F.); +#39193 = FACE_BOUND('',#39194,.F.); +#39194 = EDGE_LOOP('',(#39195,#39203,#39204,#39212)); +#39195 = ORIENTED_EDGE('',*,*,#39196,.F.); +#39196 = EDGE_CURVE('',#38508,#39197,#39199,.T.); +#39197 = VERTEX_POINT('',#39198); +#39198 = CARTESIAN_POINT('',(1.95,-0.84,1.025)); +#39199 = LINE('',#39200,#39201); +#39200 = CARTESIAN_POINT('',(1.95,-0.84,0.786976568901)); +#39201 = VECTOR('',#39202,1.); +#39202 = DIRECTION('',(0.,0.,1.)); +#39203 = ORIENTED_EDGE('',*,*,#38507,.T.); +#39204 = ORIENTED_EDGE('',*,*,#39205,.T.); +#39205 = EDGE_CURVE('',#38500,#39206,#39208,.T.); +#39206 = VERTEX_POINT('',#39207); +#39207 = CARTESIAN_POINT('',(1.95,-1.7,1.025)); +#39208 = LINE('',#39209,#39210); +#39209 = CARTESIAN_POINT('',(1.95,-1.7,0.786976568901)); +#39210 = VECTOR('',#39211,1.); +#39211 = DIRECTION('',(0.,0.,1.)); +#39212 = ORIENTED_EDGE('',*,*,#39213,.F.); +#39213 = EDGE_CURVE('',#39197,#39206,#39214,.T.); +#39214 = LINE('',#39215,#39216); +#39215 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39216 = VECTOR('',#39217,1.); +#39217 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39218 = PLANE('',#39219); +#39219 = AXIS2_PLACEMENT_3D('',#39220,#39221,#39222); +#39220 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39221 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39222 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39223 = ADVANCED_FACE('',(#39224),#39249,.F.); +#39224 = FACE_BOUND('',#39225,.F.); +#39225 = EDGE_LOOP('',(#39226,#39234,#39235,#39243)); +#39226 = ORIENTED_EDGE('',*,*,#39227,.F.); +#39227 = EDGE_CURVE('',#38500,#39228,#39230,.T.); +#39228 = VERTEX_POINT('',#39229); +#39229 = CARTESIAN_POINT('',(2.25,-1.7,0.825)); +#39230 = LINE('',#39231,#39232); +#39231 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#39232 = VECTOR('',#39233,1.); +#39233 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39234 = ORIENTED_EDGE('',*,*,#38499,.T.); +#39235 = ORIENTED_EDGE('',*,*,#39236,.T.); +#39236 = EDGE_CURVE('',#38492,#39237,#39239,.T.); +#39237 = VERTEX_POINT('',#39238); +#39238 = CARTESIAN_POINT('',(2.25,-2.11,0.825)); +#39239 = LINE('',#39240,#39241); +#39240 = CARTESIAN_POINT('',(1.8,-2.11,0.825)); +#39241 = VECTOR('',#39242,1.); +#39242 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39243 = ORIENTED_EDGE('',*,*,#39244,.F.); +#39244 = EDGE_CURVE('',#39228,#39237,#39245,.T.); +#39245 = LINE('',#39246,#39247); +#39246 = CARTESIAN_POINT('',(2.25,-1.7,0.825)); +#39247 = VECTOR('',#39248,1.); +#39248 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39249 = PLANE('',#39250); +#39250 = AXIS2_PLACEMENT_3D('',#39251,#39252,#39253); +#39251 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#39252 = DIRECTION('',(0.,0.,1.)); +#39253 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#39254 = ADVANCED_FACE('',(#39255),#39279,.F.); +#39255 = FACE_BOUND('',#39256,.F.); +#39256 = EDGE_LOOP('',(#39257,#39265,#39266,#39273)); +#39257 = ORIENTED_EDGE('',*,*,#39258,.F.); +#39258 = EDGE_CURVE('',#38492,#39259,#39261,.T.); +#39259 = VERTEX_POINT('',#39260); +#39260 = CARTESIAN_POINT('',(1.95,-2.11,1.025)); +#39261 = LINE('',#39262,#39263); +#39262 = CARTESIAN_POINT('',(1.95,-2.11,0.786976568901)); +#39263 = VECTOR('',#39264,1.); +#39264 = DIRECTION('',(0.,0.,1.)); +#39265 = ORIENTED_EDGE('',*,*,#38491,.T.); +#39266 = ORIENTED_EDGE('',*,*,#39267,.T.); +#39267 = EDGE_CURVE('',#38485,#39268,#39270,.T.); +#39268 = VERTEX_POINT('',#39269); +#39269 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39270 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39271,#39272),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39271 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#39272 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39273 = ORIENTED_EDGE('',*,*,#39274,.F.); +#39274 = EDGE_CURVE('',#39259,#39268,#39275,.T.); +#39275 = LINE('',#39276,#39277); +#39276 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39277 = VECTOR('',#39278,1.); +#39278 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39279 = PLANE('',#39280); +#39280 = AXIS2_PLACEMENT_3D('',#39281,#39282,#39283); +#39281 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#39282 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39283 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39284 = ADVANCED_FACE('',(#39285),#39302,.F.); +#39285 = FACE_BOUND('',#39286,.F.); +#39286 = EDGE_LOOP('',(#39287,#39288,#39289,#39297)); +#39287 = ORIENTED_EDGE('',*,*,#38572,.T.); +#39288 = ORIENTED_EDGE('',*,*,#38760,.T.); +#39289 = ORIENTED_EDGE('',*,*,#39290,.F.); +#39290 = EDGE_CURVE('',#39291,#38761,#39293,.T.); +#39291 = VERTEX_POINT('',#39292); +#39292 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39293 = LINE('',#39294,#39295); +#39294 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39295 = VECTOR('',#39296,1.); +#39296 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39297 = ORIENTED_EDGE('',*,*,#39298,.F.); +#39298 = EDGE_CURVE('',#38573,#39291,#39299,.T.); +#39299 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39300,#39301),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39300 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#39301 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39302 = PLANE('',#39303); +#39303 = AXIS2_PLACEMENT_3D('',#39304,#39305,#39306); +#39304 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#39305 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#39306 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39307 = ADVANCED_FACE('',(#39308),#39325,.F.); +#39308 = FACE_BOUND('',#39309,.F.); +#39309 = EDGE_LOOP('',(#39310,#39311,#39318,#39324)); +#39310 = ORIENTED_EDGE('',*,*,#38601,.T.); +#39311 = ORIENTED_EDGE('',*,*,#39312,.T.); +#39312 = EDGE_CURVE('',#38595,#39313,#39315,.T.); +#39313 = VERTEX_POINT('',#39314); +#39314 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39315 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39316,#39317),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39316 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#39317 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39318 = ORIENTED_EDGE('',*,*,#39319,.F.); +#39319 = EDGE_CURVE('',#39268,#39313,#39320,.T.); +#39320 = LINE('',#39321,#39322); +#39321 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39322 = VECTOR('',#39323,1.); +#39323 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#39324 = ORIENTED_EDGE('',*,*,#39267,.F.); +#39325 = PLANE('',#39326); +#39326 = AXIS2_PLACEMENT_3D('',#39327,#39328,#39329); +#39327 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#39328 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39329 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#39330 = ADVANCED_FACE('',(#39331),#39342,.F.); +#39331 = FACE_BOUND('',#39332,.F.); +#39332 = EDGE_LOOP('',(#39333,#39334,#39335,#39341)); +#39333 = ORIENTED_EDGE('',*,*,#38618,.T.); +#39334 = ORIENTED_EDGE('',*,*,#39298,.T.); +#39335 = ORIENTED_EDGE('',*,*,#39336,.F.); +#39336 = EDGE_CURVE('',#39313,#39291,#39337,.T.); +#39337 = LINE('',#39338,#39339); +#39338 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39339 = VECTOR('',#39340,1.); +#39340 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39341 = ORIENTED_EDGE('',*,*,#39312,.F.); +#39342 = PLANE('',#39343); +#39343 = AXIS2_PLACEMENT_3D('',#39344,#39345,#39346); +#39344 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#39345 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39346 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39347 = ADVANCED_FACE('',(#39348),#39387,.F.); +#39348 = FACE_BOUND('',#39349,.F.); +#39349 = EDGE_LOOP('',(#39350,#39358,#39366,#39372,#39373,#39381)); +#39350 = ORIENTED_EDGE('',*,*,#39351,.F.); +#39351 = EDGE_CURVE('',#39352,#38955,#39354,.T.); +#39352 = VERTEX_POINT('',#39353); +#39353 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39354 = LINE('',#39355,#39356); +#39355 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39356 = VECTOR('',#39357,1.); +#39357 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39358 = ORIENTED_EDGE('',*,*,#39359,.T.); +#39359 = EDGE_CURVE('',#39352,#39360,#39362,.T.); +#39360 = VERTEX_POINT('',#39361); +#39361 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#39362 = LINE('',#39363,#39364); +#39363 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39364 = VECTOR('',#39365,1.); +#39365 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39366 = ORIENTED_EDGE('',*,*,#39367,.T.); +#39367 = EDGE_CURVE('',#39360,#38723,#39368,.T.); +#39368 = LINE('',#39369,#39370); +#39369 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#39370 = VECTOR('',#39371,1.); +#39371 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39372 = ORIENTED_EDGE('',*,*,#38722,.T.); +#39373 = ORIENTED_EDGE('',*,*,#39374,.F.); +#39374 = EDGE_CURVE('',#39375,#38715,#39377,.T.); +#39375 = VERTEX_POINT('',#39376); +#39376 = CARTESIAN_POINT('',(-1.875,1.7,1.025)); +#39377 = LINE('',#39378,#39379); +#39378 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39379 = VECTOR('',#39380,1.); +#39380 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39381 = ORIENTED_EDGE('',*,*,#39382,.F.); +#39382 = EDGE_CURVE('',#38955,#39375,#39383,.T.); +#39383 = LINE('',#39384,#39385); +#39384 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39385 = VECTOR('',#39386,1.); +#39386 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39387 = PLANE('',#39388); +#39388 = AXIS2_PLACEMENT_3D('',#39389,#39390,#39391); +#39389 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39390 = DIRECTION('',(0.,0.,-1.)); +#39391 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39392 = ADVANCED_FACE('',(#39393),#39473,.F.); +#39393 = FACE_BOUND('',#39394,.F.); +#39394 = EDGE_LOOP('',(#39395,#39405,#39413,#39421,#39429,#39437,#39445, + #39451,#39452,#39453,#39460,#39468)); +#39395 = ORIENTED_EDGE('',*,*,#39396,.T.); +#39396 = EDGE_CURVE('',#39397,#39399,#39401,.T.); +#39397 = VERTEX_POINT('',#39398); +#39398 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39399 = VERTEX_POINT('',#39400); +#39400 = CARTESIAN_POINT('',(-1.875,-2.11,1.025)); +#39401 = LINE('',#39402,#39403); +#39402 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39403 = VECTOR('',#39404,1.); +#39404 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39405 = ORIENTED_EDGE('',*,*,#39406,.T.); +#39406 = EDGE_CURVE('',#39399,#39407,#39409,.T.); +#39407 = VERTEX_POINT('',#39408); +#39408 = CARTESIAN_POINT('',(-1.875,-1.7,1.025)); +#39409 = LINE('',#39410,#39411); +#39410 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39411 = VECTOR('',#39412,1.); +#39412 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39413 = ORIENTED_EDGE('',*,*,#39414,.T.); +#39414 = EDGE_CURVE('',#39407,#39415,#39417,.T.); +#39415 = VERTEX_POINT('',#39416); +#39416 = CARTESIAN_POINT('',(-1.875,-0.84,1.025)); +#39417 = LINE('',#39418,#39419); +#39418 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39419 = VECTOR('',#39420,1.); +#39420 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39421 = ORIENTED_EDGE('',*,*,#39422,.T.); +#39422 = EDGE_CURVE('',#39415,#39423,#39425,.T.); +#39423 = VERTEX_POINT('',#39424); +#39424 = CARTESIAN_POINT('',(-1.875,-0.43,1.025)); +#39425 = LINE('',#39426,#39427); +#39426 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39427 = VECTOR('',#39428,1.); +#39428 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39429 = ORIENTED_EDGE('',*,*,#39430,.T.); +#39430 = EDGE_CURVE('',#39423,#39431,#39433,.T.); +#39431 = VERTEX_POINT('',#39432); +#39432 = CARTESIAN_POINT('',(-1.875,0.43,1.025)); +#39433 = LINE('',#39434,#39435); +#39434 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39435 = VECTOR('',#39436,1.); +#39436 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39437 = ORIENTED_EDGE('',*,*,#39438,.T.); +#39438 = EDGE_CURVE('',#39431,#39439,#39441,.T.); +#39439 = VERTEX_POINT('',#39440); +#39440 = CARTESIAN_POINT('',(-1.875,0.84,1.025)); +#39441 = LINE('',#39442,#39443); +#39442 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39443 = VECTOR('',#39444,1.); +#39444 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39445 = ORIENTED_EDGE('',*,*,#39446,.T.); +#39446 = EDGE_CURVE('',#39439,#39375,#39447,.T.); +#39447 = LINE('',#39448,#39449); +#39448 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39449 = VECTOR('',#39450,1.); +#39450 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39451 = ORIENTED_EDGE('',*,*,#39374,.T.); +#39452 = ORIENTED_EDGE('',*,*,#38714,.T.); +#39453 = ORIENTED_EDGE('',*,*,#39454,.T.); +#39454 = EDGE_CURVE('',#38707,#39455,#39457,.T.); +#39455 = VERTEX_POINT('',#39456); +#39456 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39457 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39458,#39459),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39458 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#39459 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39460 = ORIENTED_EDGE('',*,*,#39461,.F.); +#39461 = EDGE_CURVE('',#39462,#39455,#39464,.T.); +#39462 = VERTEX_POINT('',#39463); +#39463 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39464 = LINE('',#39465,#39466); +#39465 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39466 = VECTOR('',#39467,1.); +#39467 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#39468 = ORIENTED_EDGE('',*,*,#39469,.F.); +#39469 = EDGE_CURVE('',#39397,#39462,#39470,.T.); +#39470 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39471,#39472),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39471 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39472 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39473 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39474,#39475) + ,(#39476,#39477 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#39474 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#39475 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#39476 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#39477 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39478 = ADVANCED_FACE('',(#39479),#39496,.F.); +#39479 = FACE_BOUND('',#39480,.F.); +#39480 = EDGE_LOOP('',(#39481,#39482,#39489,#39495)); +#39481 = ORIENTED_EDGE('',*,*,#38706,.T.); +#39482 = ORIENTED_EDGE('',*,*,#39483,.T.); +#39483 = EDGE_CURVE('',#38699,#39484,#39486,.T.); +#39484 = VERTEX_POINT('',#39485); +#39485 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39486 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39487,#39488),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39487 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#39488 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39489 = ORIENTED_EDGE('',*,*,#39490,.F.); +#39490 = EDGE_CURVE('',#39455,#39484,#39491,.T.); +#39491 = LINE('',#39492,#39493); +#39492 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39493 = VECTOR('',#39494,1.); +#39494 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#39495 = ORIENTED_EDGE('',*,*,#39454,.F.); +#39496 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39497,#39498) + ,(#39499,#39500 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#39497 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#39498 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#39499 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#39500 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39501 = ADVANCED_FACE('',(#39502),#39519,.F.); +#39502 = FACE_BOUND('',#39503,.F.); +#39503 = EDGE_LOOP('',(#39504,#39505,#39512,#39518)); +#39504 = ORIENTED_EDGE('',*,*,#38698,.T.); +#39505 = ORIENTED_EDGE('',*,*,#39506,.T.); +#39506 = EDGE_CURVE('',#38691,#39507,#39509,.T.); +#39507 = VERTEX_POINT('',#39508); +#39508 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39509 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39510,#39511),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39510 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#39511 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39512 = ORIENTED_EDGE('',*,*,#39513,.F.); +#39513 = EDGE_CURVE('',#39484,#39507,#39514,.T.); +#39514 = LINE('',#39515,#39516); +#39515 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39516 = VECTOR('',#39517,1.); +#39517 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#39518 = ORIENTED_EDGE('',*,*,#39483,.F.); +#39519 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39520,#39521) + ,(#39522,#39523 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#39520 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#39521 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#39522 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#39523 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39524 = ADVANCED_FACE('',(#39525),#39542,.F.); +#39525 = FACE_BOUND('',#39526,.F.); +#39526 = EDGE_LOOP('',(#39527,#39528,#39535,#39541)); +#39527 = ORIENTED_EDGE('',*,*,#38690,.T.); +#39528 = ORIENTED_EDGE('',*,*,#39529,.T.); +#39529 = EDGE_CURVE('',#38683,#39530,#39532,.T.); +#39530 = VERTEX_POINT('',#39531); +#39531 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39532 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39533,#39534),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39533 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39534 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39535 = ORIENTED_EDGE('',*,*,#39536,.F.); +#39536 = EDGE_CURVE('',#39507,#39530,#39537,.T.); +#39537 = LINE('',#39538,#39539); +#39538 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39539 = VECTOR('',#39540,1.); +#39540 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#39541 = ORIENTED_EDGE('',*,*,#39506,.F.); +#39542 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39543,#39544) + ,(#39545,#39546 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#39543 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#39544 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#39545 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39546 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39547 = ADVANCED_FACE('',(#39548),#39629,.F.); +#39548 = FACE_BOUND('',#39549,.F.); +#39549 = EDGE_LOOP('',(#39550,#39551,#39559,#39567,#39575,#39583,#39591, + #39599,#39607,#39615,#39622,#39628)); +#39550 = ORIENTED_EDGE('',*,*,#38682,.T.); +#39551 = ORIENTED_EDGE('',*,*,#39552,.T.); +#39552 = EDGE_CURVE('',#38675,#39553,#39555,.T.); +#39553 = VERTEX_POINT('',#39554); +#39554 = CARTESIAN_POINT('',(1.875,1.7,1.025)); +#39555 = LINE('',#39556,#39557); +#39556 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39557 = VECTOR('',#39558,1.); +#39558 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39559 = ORIENTED_EDGE('',*,*,#39560,.T.); +#39560 = EDGE_CURVE('',#39553,#39561,#39563,.T.); +#39561 = VERTEX_POINT('',#39562); +#39562 = CARTESIAN_POINT('',(1.875,0.84,1.025)); +#39563 = LINE('',#39564,#39565); +#39564 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39565 = VECTOR('',#39566,1.); +#39566 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39567 = ORIENTED_EDGE('',*,*,#39568,.T.); +#39568 = EDGE_CURVE('',#39561,#39569,#39571,.T.); +#39569 = VERTEX_POINT('',#39570); +#39570 = CARTESIAN_POINT('',(1.875,0.43,1.025)); +#39571 = LINE('',#39572,#39573); +#39572 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39573 = VECTOR('',#39574,1.); +#39574 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39575 = ORIENTED_EDGE('',*,*,#39576,.T.); +#39576 = EDGE_CURVE('',#39569,#39577,#39579,.T.); +#39577 = VERTEX_POINT('',#39578); +#39578 = CARTESIAN_POINT('',(1.875,-0.43,1.025)); +#39579 = LINE('',#39580,#39581); +#39580 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39581 = VECTOR('',#39582,1.); +#39582 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39583 = ORIENTED_EDGE('',*,*,#39584,.T.); +#39584 = EDGE_CURVE('',#39577,#39585,#39587,.T.); +#39585 = VERTEX_POINT('',#39586); +#39586 = CARTESIAN_POINT('',(1.875,-0.84,1.025)); +#39587 = LINE('',#39588,#39589); +#39588 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39589 = VECTOR('',#39590,1.); +#39590 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39591 = ORIENTED_EDGE('',*,*,#39592,.T.); +#39592 = EDGE_CURVE('',#39585,#39593,#39595,.T.); +#39593 = VERTEX_POINT('',#39594); +#39594 = CARTESIAN_POINT('',(1.875,-1.7,1.025)); +#39595 = LINE('',#39596,#39597); +#39596 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39597 = VECTOR('',#39598,1.); +#39598 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39599 = ORIENTED_EDGE('',*,*,#39600,.T.); +#39600 = EDGE_CURVE('',#39593,#39601,#39603,.T.); +#39601 = VERTEX_POINT('',#39602); +#39602 = CARTESIAN_POINT('',(1.875,-2.11,1.025)); +#39603 = LINE('',#39604,#39605); +#39604 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39605 = VECTOR('',#39606,1.); +#39606 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39607 = ORIENTED_EDGE('',*,*,#39608,.T.); +#39608 = EDGE_CURVE('',#39601,#39609,#39611,.T.); +#39609 = VERTEX_POINT('',#39610); +#39610 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39611 = LINE('',#39612,#39613); +#39612 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39613 = VECTOR('',#39614,1.); +#39614 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39615 = ORIENTED_EDGE('',*,*,#39616,.T.); +#39616 = EDGE_CURVE('',#39609,#39617,#39619,.T.); +#39617 = VERTEX_POINT('',#39618); +#39618 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#39619 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39620,#39621),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#39620 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39621 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#39622 = ORIENTED_EDGE('',*,*,#39623,.F.); +#39623 = EDGE_CURVE('',#39530,#39617,#39624,.T.); +#39624 = LINE('',#39625,#39626); +#39625 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39626 = VECTOR('',#39627,1.); +#39627 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39628 = ORIENTED_EDGE('',*,*,#39529,.F.); +#39629 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#39630,#39631) + ,(#39632,#39633 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#39630 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#39631 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#39632 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39633 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#39634 = ADVANCED_FACE('',(#39635),#39667,.F.); +#39635 = FACE_BOUND('',#39636,.F.); +#39636 = EDGE_LOOP('',(#39637,#39645,#39653,#39659,#39665,#39666)); +#39637 = ORIENTED_EDGE('',*,*,#39638,.F.); +#39638 = EDGE_CURVE('',#39639,#38667,#39641,.T.); +#39639 = VERTEX_POINT('',#39640); +#39640 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39641 = LINE('',#39642,#39643); +#39642 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39643 = VECTOR('',#39644,1.); +#39644 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39645 = ORIENTED_EDGE('',*,*,#39646,.T.); +#39646 = EDGE_CURVE('',#39639,#39647,#39649,.T.); +#39647 = VERTEX_POINT('',#39648); +#39648 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#39649 = LINE('',#39650,#39651); +#39650 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39651 = VECTOR('',#39652,1.); +#39652 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#39653 = ORIENTED_EDGE('',*,*,#39654,.T.); +#39654 = EDGE_CURVE('',#39647,#39073,#39655,.T.); +#39655 = LINE('',#39656,#39657); +#39656 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#39657 = VECTOR('',#39658,1.); +#39658 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39659 = ORIENTED_EDGE('',*,*,#39660,.T.); +#39660 = EDGE_CURVE('',#39073,#39553,#39661,.T.); +#39661 = LINE('',#39662,#39663); +#39662 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#39663 = VECTOR('',#39664,1.); +#39664 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39665 = ORIENTED_EDGE('',*,*,#39552,.F.); +#39666 = ORIENTED_EDGE('',*,*,#38674,.F.); +#39667 = PLANE('',#39668); +#39668 = AXIS2_PLACEMENT_3D('',#39669,#39670,#39671); +#39669 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#39670 = DIRECTION('',(0.,0.,-1.)); +#39671 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#39672 = ADVANCED_FACE('',(#39673),#39716,.F.); +#39673 = FACE_BOUND('',#39674,.F.); +#39674 = EDGE_LOOP('',(#39675,#39676,#39682,#39683,#39691,#39699,#39705, + #39706,#39712,#39713,#39714,#39715)); +#39675 = ORIENTED_EDGE('',*,*,#38776,.T.); +#39676 = ORIENTED_EDGE('',*,*,#39677,.T.); +#39677 = EDGE_CURVE('',#38769,#39399,#39678,.T.); +#39678 = LINE('',#39679,#39680); +#39679 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39680 = VECTOR('',#39681,1.); +#39681 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39682 = ORIENTED_EDGE('',*,*,#39396,.F.); +#39683 = ORIENTED_EDGE('',*,*,#39684,.F.); +#39684 = EDGE_CURVE('',#39685,#39397,#39687,.T.); +#39685 = VERTEX_POINT('',#39686); +#39686 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#39687 = LINE('',#39688,#39689); +#39688 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#39689 = VECTOR('',#39690,1.); +#39690 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#39691 = ORIENTED_EDGE('',*,*,#39692,.F.); +#39692 = EDGE_CURVE('',#39693,#39685,#39695,.T.); +#39693 = VERTEX_POINT('',#39694); +#39694 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#39695 = LINE('',#39696,#39697); +#39696 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#39697 = VECTOR('',#39698,1.); +#39698 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39699 = ORIENTED_EDGE('',*,*,#39700,.F.); +#39700 = EDGE_CURVE('',#39609,#39693,#39701,.T.); +#39701 = LINE('',#39702,#39703); +#39702 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#39703 = VECTOR('',#39704,1.); +#39704 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#39705 = ORIENTED_EDGE('',*,*,#39608,.F.); +#39706 = ORIENTED_EDGE('',*,*,#39707,.F.); +#39707 = EDGE_CURVE('',#39259,#39601,#39708,.T.); +#39708 = LINE('',#39709,#39710); +#39709 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#39710 = VECTOR('',#39711,1.); +#39711 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#39712 = ORIENTED_EDGE('',*,*,#39274,.T.); +#39713 = ORIENTED_EDGE('',*,*,#39319,.T.); +#39714 = ORIENTED_EDGE('',*,*,#39336,.T.); +#39715 = ORIENTED_EDGE('',*,*,#39290,.T.); +#39716 = PLANE('',#39717); +#39717 = AXIS2_PLACEMENT_3D('',#39718,#39719,#39720); +#39718 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#39719 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#39720 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#39721 = ADVANCED_FACE('',(#39722),#39808,.F.); +#39722 = FACE_BOUND('',#39723,.F.); +#39723 = EDGE_LOOP('',(#39724,#39725,#39726,#39735,#39743,#39752,#39760, + #39768,#39776,#39785,#39793,#39802)); +#39724 = ORIENTED_EDGE('',*,*,#38768,.F.); +#39725 = ORIENTED_EDGE('',*,*,#38790,.T.); +#39726 = ORIENTED_EDGE('',*,*,#39727,.T.); +#39727 = EDGE_CURVE('',#38791,#39728,#39730,.T.); +#39728 = VERTEX_POINT('',#39729); +#39729 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#39730 = CIRCLE('',#39731,0.1); +#39731 = AXIS2_PLACEMENT_3D('',#39732,#39733,#39734); +#39732 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#39733 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#39734 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39735 = ORIENTED_EDGE('',*,*,#39736,.T.); +#39736 = EDGE_CURVE('',#39728,#39737,#39739,.T.); +#39737 = VERTEX_POINT('',#39738); +#39738 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467)); +#39739 = LINE('',#39740,#39741); +#39740 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#39741 = VECTOR('',#39742,1.); +#39742 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#39743 = ORIENTED_EDGE('',*,*,#39744,.T.); +#39744 = EDGE_CURVE('',#39737,#39745,#39747,.T.); +#39745 = VERTEX_POINT('',#39746); +#39746 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#39747 = CIRCLE('',#39748,0.3); +#39748 = AXIS2_PLACEMENT_3D('',#39749,#39750,#39751); +#39749 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#39750 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39751 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#39752 = ORIENTED_EDGE('',*,*,#39753,.T.); +#39753 = EDGE_CURVE('',#39745,#39754,#39756,.T.); +#39754 = VERTEX_POINT('',#39755); +#39755 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#39756 = LINE('',#39757,#39758); +#39757 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#39758 = VECTOR('',#39759,1.); +#39759 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39760 = ORIENTED_EDGE('',*,*,#39761,.T.); +#39761 = EDGE_CURVE('',#39754,#39762,#39764,.T.); +#39762 = VERTEX_POINT('',#39763); +#39763 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#39764 = LINE('',#39765,#39766); +#39765 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#39766 = VECTOR('',#39767,1.); +#39767 = DIRECTION('',(0.,0.,1.)); +#39768 = ORIENTED_EDGE('',*,*,#39769,.T.); +#39769 = EDGE_CURVE('',#39762,#39770,#39772,.T.); +#39770 = VERTEX_POINT('',#39771); +#39771 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2)); +#39772 = LINE('',#39773,#39774); +#39773 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#39774 = VECTOR('',#39775,1.); +#39775 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39776 = ORIENTED_EDGE('',*,*,#39777,.T.); +#39777 = EDGE_CURVE('',#39770,#39778,#39780,.T.); +#39778 = VERTEX_POINT('',#39779); +#39779 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#39780 = CIRCLE('',#39781,0.1); +#39781 = AXIS2_PLACEMENT_3D('',#39782,#39783,#39784); +#39782 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#39783 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#39784 = DIRECTION('',(0.,0.,-1.)); +#39785 = ORIENTED_EDGE('',*,*,#39786,.T.); +#39786 = EDGE_CURVE('',#39778,#39787,#39789,.T.); +#39787 = VERTEX_POINT('',#39788); +#39788 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533)); +#39789 = LINE('',#39790,#39791); +#39790 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#39791 = VECTOR('',#39792,1.); +#39792 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#39793 = ORIENTED_EDGE('',*,*,#39794,.T.); +#39794 = EDGE_CURVE('',#39787,#39795,#39797,.T.); +#39795 = VERTEX_POINT('',#39796); +#39796 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39797 = CIRCLE('',#39798,0.3); +#39798 = AXIS2_PLACEMENT_3D('',#39799,#39800,#39801); +#39799 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#39800 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39801 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#39802 = ORIENTED_EDGE('',*,*,#39803,.T.); +#39803 = EDGE_CURVE('',#39795,#38769,#39804,.T.); +#39804 = LINE('',#39805,#39806); +#39805 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39806 = VECTOR('',#39807,1.); +#39807 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39808 = PLANE('',#39809); +#39809 = AXIS2_PLACEMENT_3D('',#39810,#39811,#39812); +#39810 = CARTESIAN_POINT('',(-2.42560961319,-2.11,0.548953137803)); +#39811 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39812 = DIRECTION('',(0.,-0.,1.)); +#39813 = ADVANCED_FACE('',(#39814),#39833,.F.); +#39814 = FACE_BOUND('',#39815,.F.); +#39815 = EDGE_LOOP('',(#39816,#39817,#39826,#39832)); +#39816 = ORIENTED_EDGE('',*,*,#38807,.T.); +#39817 = ORIENTED_EDGE('',*,*,#39818,.T.); +#39818 = EDGE_CURVE('',#38800,#39819,#39821,.T.); +#39819 = VERTEX_POINT('',#39820); +#39820 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767)); +#39821 = CIRCLE('',#39822,0.1); +#39822 = AXIS2_PLACEMENT_3D('',#39823,#39824,#39825); +#39823 = CARTESIAN_POINT('',(-2.25,-1.7,0.725)); +#39824 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#39825 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39826 = ORIENTED_EDGE('',*,*,#39827,.F.); +#39827 = EDGE_CURVE('',#39728,#39819,#39828,.T.); +#39828 = LINE('',#39829,#39830); +#39829 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#39830 = VECTOR('',#39831,1.); +#39831 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39832 = ORIENTED_EDGE('',*,*,#39727,.F.); +#39833 = CYLINDRICAL_SURFACE('',#39834,0.1); +#39834 = AXIS2_PLACEMENT_3D('',#39835,#39836,#39837); +#39835 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#39836 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#39837 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39838 = ADVANCED_FACE('',(#39839),#39917,.T.); +#39839 = FACE_BOUND('',#39840,.T.); +#39840 = EDGE_LOOP('',(#39841,#39842,#39843,#39844,#39852,#39861,#39869, + #39877,#39885,#39894,#39902,#39911)); +#39841 = ORIENTED_EDGE('',*,*,#38821,.F.); +#39842 = ORIENTED_EDGE('',*,*,#38799,.T.); +#39843 = ORIENTED_EDGE('',*,*,#39818,.T.); +#39844 = ORIENTED_EDGE('',*,*,#39845,.T.); +#39845 = EDGE_CURVE('',#39819,#39846,#39848,.T.); +#39846 = VERTEX_POINT('',#39847); +#39847 = CARTESIAN_POINT('',(-2.429496640897,-1.7,0.2479055467)); +#39848 = LINE('',#39849,#39850); +#39849 = CARTESIAN_POINT('',(-2.348480775301,-1.7,0.742364817767)); +#39850 = VECTOR('',#39851,1.); +#39851 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#39852 = ORIENTED_EDGE('',*,*,#39853,.T.); +#39853 = EDGE_CURVE('',#39846,#39854,#39856,.T.); +#39854 = VERTEX_POINT('',#39855); +#39855 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16)); +#39856 = CIRCLE('',#39857,0.3); +#39857 = AXIS2_PLACEMENT_3D('',#39858,#39859,#39860); +#39858 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3)); +#39859 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39860 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#39861 = ORIENTED_EDGE('',*,*,#39862,.T.); +#39862 = EDGE_CURVE('',#39854,#39863,#39865,.T.); +#39863 = VERTEX_POINT('',#39864); +#39864 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16)); +#39865 = LINE('',#39866,#39867); +#39866 = CARTESIAN_POINT('',(-2.724938966801,-1.7,-1.665334536938E-16)); +#39867 = VECTOR('',#39868,1.); +#39868 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39869 = ORIENTED_EDGE('',*,*,#39870,.T.); +#39870 = EDGE_CURVE('',#39863,#39871,#39873,.T.); +#39871 = VERTEX_POINT('',#39872); +#39872 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#39873 = LINE('',#39874,#39875); +#39874 = CARTESIAN_POINT('',(-3.,-1.7,-1.665334536938E-16)); +#39875 = VECTOR('',#39876,1.); +#39876 = DIRECTION('',(0.,0.,1.)); +#39877 = ORIENTED_EDGE('',*,*,#39878,.T.); +#39878 = EDGE_CURVE('',#39871,#39879,#39881,.T.); +#39879 = VERTEX_POINT('',#39880); +#39880 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.2)); +#39881 = LINE('',#39882,#39883); +#39882 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#39883 = VECTOR('',#39884,1.); +#39884 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39885 = ORIENTED_EDGE('',*,*,#39886,.T.); +#39886 = EDGE_CURVE('',#39879,#39887,#39889,.T.); +#39887 = VERTEX_POINT('',#39888); +#39888 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233)); +#39889 = CIRCLE('',#39890,0.1); +#39890 = AXIS2_PLACEMENT_3D('',#39891,#39892,#39893); +#39891 = CARTESIAN_POINT('',(-2.724938966801,-1.7,0.3)); +#39892 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#39893 = DIRECTION('',(0.,0.,-1.)); +#39894 = ORIENTED_EDGE('',*,*,#39895,.T.); +#39895 = EDGE_CURVE('',#39887,#39896,#39898,.T.); +#39896 = VERTEX_POINT('',#39897); +#39897 = CARTESIAN_POINT('',(-2.545442325904,-1.7,0.7770944533)); +#39898 = LINE('',#39899,#39900); +#39899 = CARTESIAN_POINT('',(-2.6264581915,-1.7,0.282635182233)); +#39900 = VECTOR('',#39901,1.); +#39901 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#39902 = ORIENTED_EDGE('',*,*,#39903,.T.); +#39903 = EDGE_CURVE('',#39896,#39904,#39906,.T.); +#39904 = VERTEX_POINT('',#39905); +#39905 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#39906 = CIRCLE('',#39907,0.3); +#39907 = AXIS2_PLACEMENT_3D('',#39908,#39909,#39910); +#39908 = CARTESIAN_POINT('',(-2.25,-1.7,0.725)); +#39909 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39910 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#39911 = ORIENTED_EDGE('',*,*,#39912,.T.); +#39912 = EDGE_CURVE('',#39904,#38822,#39913,.T.); +#39913 = LINE('',#39914,#39915); +#39914 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#39915 = VECTOR('',#39916,1.); +#39916 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39917 = PLANE('',#39918); +#39918 = AXIS2_PLACEMENT_3D('',#39919,#39920,#39921); +#39919 = CARTESIAN_POINT('',(-2.42560961319,-1.7,0.548953137803)); +#39920 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#39921 = DIRECTION('',(0.,-0.,1.)); +#39922 = ADVANCED_FACE('',(#39923),#39939,.F.); +#39923 = FACE_BOUND('',#39924,.F.); +#39924 = EDGE_LOOP('',(#39925,#39926,#39932,#39933)); +#39925 = ORIENTED_EDGE('',*,*,#38838,.T.); +#39926 = ORIENTED_EDGE('',*,*,#39927,.T.); +#39927 = EDGE_CURVE('',#38831,#39415,#39928,.T.); +#39928 = LINE('',#39929,#39930); +#39929 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#39930 = VECTOR('',#39931,1.); +#39931 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39932 = ORIENTED_EDGE('',*,*,#39414,.F.); +#39933 = ORIENTED_EDGE('',*,*,#39934,.F.); +#39934 = EDGE_CURVE('',#38822,#39407,#39935,.T.); +#39935 = LINE('',#39936,#39937); +#39936 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#39937 = VECTOR('',#39938,1.); +#39938 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39939 = PLANE('',#39940); +#39940 = AXIS2_PLACEMENT_3D('',#39941,#39942,#39943); +#39941 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#39942 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#39943 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#39944 = ADVANCED_FACE('',(#39945),#40031,.F.); +#39945 = FACE_BOUND('',#39946,.F.); +#39946 = EDGE_LOOP('',(#39947,#39948,#39949,#39958,#39966,#39975,#39983, + #39991,#39999,#40008,#40016,#40025)); +#39947 = ORIENTED_EDGE('',*,*,#38830,.F.); +#39948 = ORIENTED_EDGE('',*,*,#38852,.T.); +#39949 = ORIENTED_EDGE('',*,*,#39950,.T.); +#39950 = EDGE_CURVE('',#38853,#39951,#39953,.T.); +#39951 = VERTEX_POINT('',#39952); +#39952 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#39953 = CIRCLE('',#39954,0.1); +#39954 = AXIS2_PLACEMENT_3D('',#39955,#39956,#39957); +#39955 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#39956 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#39957 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#39958 = ORIENTED_EDGE('',*,*,#39959,.T.); +#39959 = EDGE_CURVE('',#39951,#39960,#39962,.T.); +#39960 = VERTEX_POINT('',#39961); +#39961 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467)); +#39962 = LINE('',#39963,#39964); +#39963 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#39964 = VECTOR('',#39965,1.); +#39965 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#39966 = ORIENTED_EDGE('',*,*,#39967,.T.); +#39967 = EDGE_CURVE('',#39960,#39968,#39970,.T.); +#39968 = VERTEX_POINT('',#39969); +#39969 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#39970 = CIRCLE('',#39971,0.3); +#39971 = AXIS2_PLACEMENT_3D('',#39972,#39973,#39974); +#39972 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#39973 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#39974 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#39975 = ORIENTED_EDGE('',*,*,#39976,.T.); +#39976 = EDGE_CURVE('',#39968,#39977,#39979,.T.); +#39977 = VERTEX_POINT('',#39978); +#39978 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#39979 = LINE('',#39980,#39981); +#39980 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#39981 = VECTOR('',#39982,1.); +#39982 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#39983 = ORIENTED_EDGE('',*,*,#39984,.T.); +#39984 = EDGE_CURVE('',#39977,#39985,#39987,.T.); +#39985 = VERTEX_POINT('',#39986); +#39986 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#39987 = LINE('',#39988,#39989); +#39988 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#39989 = VECTOR('',#39990,1.); +#39990 = DIRECTION('',(0.,0.,1.)); +#39991 = ORIENTED_EDGE('',*,*,#39992,.T.); +#39992 = EDGE_CURVE('',#39985,#39993,#39995,.T.); +#39993 = VERTEX_POINT('',#39994); +#39994 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2)); +#39995 = LINE('',#39996,#39997); +#39996 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#39997 = VECTOR('',#39998,1.); +#39998 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#39999 = ORIENTED_EDGE('',*,*,#40000,.T.); +#40000 = EDGE_CURVE('',#39993,#40001,#40003,.T.); +#40001 = VERTEX_POINT('',#40002); +#40002 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#40003 = CIRCLE('',#40004,0.1); +#40004 = AXIS2_PLACEMENT_3D('',#40005,#40006,#40007); +#40005 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#40006 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40007 = DIRECTION('',(0.,0.,-1.)); +#40008 = ORIENTED_EDGE('',*,*,#40009,.T.); +#40009 = EDGE_CURVE('',#40001,#40010,#40012,.T.); +#40010 = VERTEX_POINT('',#40011); +#40011 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533)); +#40012 = LINE('',#40013,#40014); +#40013 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#40014 = VECTOR('',#40015,1.); +#40015 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40016 = ORIENTED_EDGE('',*,*,#40017,.T.); +#40017 = EDGE_CURVE('',#40010,#40018,#40020,.T.); +#40018 = VERTEX_POINT('',#40019); +#40019 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#40020 = CIRCLE('',#40021,0.3); +#40021 = AXIS2_PLACEMENT_3D('',#40022,#40023,#40024); +#40022 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#40023 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40024 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40025 = ORIENTED_EDGE('',*,*,#40026,.T.); +#40026 = EDGE_CURVE('',#40018,#38831,#40027,.T.); +#40027 = LINE('',#40028,#40029); +#40028 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#40029 = VECTOR('',#40030,1.); +#40030 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40031 = PLANE('',#40032); +#40032 = AXIS2_PLACEMENT_3D('',#40033,#40034,#40035); +#40033 = CARTESIAN_POINT('',(-2.42560961319,-0.84,0.548953137803)); +#40034 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40035 = DIRECTION('',(0.,-0.,1.)); +#40036 = ADVANCED_FACE('',(#40037),#40056,.F.); +#40037 = FACE_BOUND('',#40038,.F.); +#40038 = EDGE_LOOP('',(#40039,#40040,#40049,#40055)); +#40039 = ORIENTED_EDGE('',*,*,#38869,.T.); +#40040 = ORIENTED_EDGE('',*,*,#40041,.T.); +#40041 = EDGE_CURVE('',#38862,#40042,#40044,.T.); +#40042 = VERTEX_POINT('',#40043); +#40043 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767)); +#40044 = CIRCLE('',#40045,0.1); +#40045 = AXIS2_PLACEMENT_3D('',#40046,#40047,#40048); +#40046 = CARTESIAN_POINT('',(-2.25,-0.43,0.725)); +#40047 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40048 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40049 = ORIENTED_EDGE('',*,*,#40050,.F.); +#40050 = EDGE_CURVE('',#39951,#40042,#40051,.T.); +#40051 = LINE('',#40052,#40053); +#40052 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#40053 = VECTOR('',#40054,1.); +#40054 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40055 = ORIENTED_EDGE('',*,*,#39950,.F.); +#40056 = CYLINDRICAL_SURFACE('',#40057,0.1); +#40057 = AXIS2_PLACEMENT_3D('',#40058,#40059,#40060); +#40058 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#40059 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#40060 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40061 = ADVANCED_FACE('',(#40062),#40140,.T.); +#40062 = FACE_BOUND('',#40063,.T.); +#40063 = EDGE_LOOP('',(#40064,#40065,#40066,#40067,#40075,#40084,#40092, + #40100,#40108,#40117,#40125,#40134)); +#40064 = ORIENTED_EDGE('',*,*,#38883,.F.); +#40065 = ORIENTED_EDGE('',*,*,#38861,.T.); +#40066 = ORIENTED_EDGE('',*,*,#40041,.T.); +#40067 = ORIENTED_EDGE('',*,*,#40068,.T.); +#40068 = EDGE_CURVE('',#40042,#40069,#40071,.T.); +#40069 = VERTEX_POINT('',#40070); +#40070 = CARTESIAN_POINT('',(-2.429496640897,-0.43,0.2479055467)); +#40071 = LINE('',#40072,#40073); +#40072 = CARTESIAN_POINT('',(-2.348480775301,-0.43,0.742364817767)); +#40073 = VECTOR('',#40074,1.); +#40074 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40075 = ORIENTED_EDGE('',*,*,#40076,.T.); +#40076 = EDGE_CURVE('',#40069,#40077,#40079,.T.); +#40077 = VERTEX_POINT('',#40078); +#40078 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16) + ); +#40079 = CIRCLE('',#40080,0.3); +#40080 = AXIS2_PLACEMENT_3D('',#40081,#40082,#40083); +#40081 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3)); +#40082 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40083 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40084 = ORIENTED_EDGE('',*,*,#40085,.T.); +#40085 = EDGE_CURVE('',#40077,#40086,#40088,.T.); +#40086 = VERTEX_POINT('',#40087); +#40087 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16)); +#40088 = LINE('',#40089,#40090); +#40089 = CARTESIAN_POINT('',(-2.724938966801,-0.43,-1.665334536938E-16) + ); +#40090 = VECTOR('',#40091,1.); +#40091 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40092 = ORIENTED_EDGE('',*,*,#40093,.T.); +#40093 = EDGE_CURVE('',#40086,#40094,#40096,.T.); +#40094 = VERTEX_POINT('',#40095); +#40095 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#40096 = LINE('',#40097,#40098); +#40097 = CARTESIAN_POINT('',(-3.,-0.43,-1.665334536938E-16)); +#40098 = VECTOR('',#40099,1.); +#40099 = DIRECTION('',(0.,0.,1.)); +#40100 = ORIENTED_EDGE('',*,*,#40101,.T.); +#40101 = EDGE_CURVE('',#40094,#40102,#40104,.T.); +#40102 = VERTEX_POINT('',#40103); +#40103 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.2)); +#40104 = LINE('',#40105,#40106); +#40105 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#40106 = VECTOR('',#40107,1.); +#40107 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40108 = ORIENTED_EDGE('',*,*,#40109,.T.); +#40109 = EDGE_CURVE('',#40102,#40110,#40112,.T.); +#40110 = VERTEX_POINT('',#40111); +#40111 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233)); +#40112 = CIRCLE('',#40113,0.1); +#40113 = AXIS2_PLACEMENT_3D('',#40114,#40115,#40116); +#40114 = CARTESIAN_POINT('',(-2.724938966801,-0.43,0.3)); +#40115 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40116 = DIRECTION('',(0.,0.,-1.)); +#40117 = ORIENTED_EDGE('',*,*,#40118,.T.); +#40118 = EDGE_CURVE('',#40110,#40119,#40121,.T.); +#40119 = VERTEX_POINT('',#40120); +#40120 = CARTESIAN_POINT('',(-2.545442325904,-0.43,0.7770944533)); +#40121 = LINE('',#40122,#40123); +#40122 = CARTESIAN_POINT('',(-2.6264581915,-0.43,0.282635182233)); +#40123 = VECTOR('',#40124,1.); +#40124 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40125 = ORIENTED_EDGE('',*,*,#40126,.T.); +#40126 = EDGE_CURVE('',#40119,#40127,#40129,.T.); +#40127 = VERTEX_POINT('',#40128); +#40128 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#40129 = CIRCLE('',#40130,0.3); +#40130 = AXIS2_PLACEMENT_3D('',#40131,#40132,#40133); +#40131 = CARTESIAN_POINT('',(-2.25,-0.43,0.725)); +#40132 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40133 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40134 = ORIENTED_EDGE('',*,*,#40135,.T.); +#40135 = EDGE_CURVE('',#40127,#38884,#40136,.T.); +#40136 = LINE('',#40137,#40138); +#40137 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#40138 = VECTOR('',#40139,1.); +#40139 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40140 = PLANE('',#40141); +#40141 = AXIS2_PLACEMENT_3D('',#40142,#40143,#40144); +#40142 = CARTESIAN_POINT('',(-2.42560961319,-0.43,0.548953137803)); +#40143 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40144 = DIRECTION('',(0.,-0.,1.)); +#40145 = ADVANCED_FACE('',(#40146),#40162,.F.); +#40146 = FACE_BOUND('',#40147,.F.); +#40147 = EDGE_LOOP('',(#40148,#40149,#40155,#40156)); +#40148 = ORIENTED_EDGE('',*,*,#38900,.T.); +#40149 = ORIENTED_EDGE('',*,*,#40150,.T.); +#40150 = EDGE_CURVE('',#38893,#39431,#40151,.T.); +#40151 = LINE('',#40152,#40153); +#40152 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#40153 = VECTOR('',#40154,1.); +#40154 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40155 = ORIENTED_EDGE('',*,*,#39430,.F.); +#40156 = ORIENTED_EDGE('',*,*,#40157,.F.); +#40157 = EDGE_CURVE('',#38884,#39423,#40158,.T.); +#40158 = LINE('',#40159,#40160); +#40159 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#40160 = VECTOR('',#40161,1.); +#40161 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40162 = PLANE('',#40163); +#40163 = AXIS2_PLACEMENT_3D('',#40164,#40165,#40166); +#40164 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40165 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40166 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40167 = ADVANCED_FACE('',(#40168),#40254,.F.); +#40168 = FACE_BOUND('',#40169,.F.); +#40169 = EDGE_LOOP('',(#40170,#40171,#40172,#40181,#40189,#40198,#40206, + #40214,#40222,#40231,#40239,#40248)); +#40170 = ORIENTED_EDGE('',*,*,#38892,.F.); +#40171 = ORIENTED_EDGE('',*,*,#38914,.T.); +#40172 = ORIENTED_EDGE('',*,*,#40173,.T.); +#40173 = EDGE_CURVE('',#38915,#40174,#40176,.T.); +#40174 = VERTEX_POINT('',#40175); +#40175 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#40176 = CIRCLE('',#40177,0.1); +#40177 = AXIS2_PLACEMENT_3D('',#40178,#40179,#40180); +#40178 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#40179 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40180 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40181 = ORIENTED_EDGE('',*,*,#40182,.T.); +#40182 = EDGE_CURVE('',#40174,#40183,#40185,.T.); +#40183 = VERTEX_POINT('',#40184); +#40184 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467)); +#40185 = LINE('',#40186,#40187); +#40186 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#40187 = VECTOR('',#40188,1.); +#40188 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40189 = ORIENTED_EDGE('',*,*,#40190,.T.); +#40190 = EDGE_CURVE('',#40183,#40191,#40193,.T.); +#40191 = VERTEX_POINT('',#40192); +#40192 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#40193 = CIRCLE('',#40194,0.3); +#40194 = AXIS2_PLACEMENT_3D('',#40195,#40196,#40197); +#40195 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#40196 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40197 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40198 = ORIENTED_EDGE('',*,*,#40199,.T.); +#40199 = EDGE_CURVE('',#40191,#40200,#40202,.T.); +#40200 = VERTEX_POINT('',#40201); +#40201 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#40202 = LINE('',#40203,#40204); +#40203 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#40204 = VECTOR('',#40205,1.); +#40205 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40206 = ORIENTED_EDGE('',*,*,#40207,.T.); +#40207 = EDGE_CURVE('',#40200,#40208,#40210,.T.); +#40208 = VERTEX_POINT('',#40209); +#40209 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#40210 = LINE('',#40211,#40212); +#40211 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#40212 = VECTOR('',#40213,1.); +#40213 = DIRECTION('',(0.,0.,1.)); +#40214 = ORIENTED_EDGE('',*,*,#40215,.T.); +#40215 = EDGE_CURVE('',#40208,#40216,#40218,.T.); +#40216 = VERTEX_POINT('',#40217); +#40217 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2)); +#40218 = LINE('',#40219,#40220); +#40219 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#40220 = VECTOR('',#40221,1.); +#40221 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40222 = ORIENTED_EDGE('',*,*,#40223,.T.); +#40223 = EDGE_CURVE('',#40216,#40224,#40226,.T.); +#40224 = VERTEX_POINT('',#40225); +#40225 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#40226 = CIRCLE('',#40227,0.1); +#40227 = AXIS2_PLACEMENT_3D('',#40228,#40229,#40230); +#40228 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#40229 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40230 = DIRECTION('',(0.,0.,-1.)); +#40231 = ORIENTED_EDGE('',*,*,#40232,.T.); +#40232 = EDGE_CURVE('',#40224,#40233,#40235,.T.); +#40233 = VERTEX_POINT('',#40234); +#40234 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533)); +#40235 = LINE('',#40236,#40237); +#40236 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#40237 = VECTOR('',#40238,1.); +#40238 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40239 = ORIENTED_EDGE('',*,*,#40240,.T.); +#40240 = EDGE_CURVE('',#40233,#40241,#40243,.T.); +#40241 = VERTEX_POINT('',#40242); +#40242 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#40243 = CIRCLE('',#40244,0.3); +#40244 = AXIS2_PLACEMENT_3D('',#40245,#40246,#40247); +#40245 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#40246 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40247 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40248 = ORIENTED_EDGE('',*,*,#40249,.T.); +#40249 = EDGE_CURVE('',#40241,#38893,#40250,.T.); +#40250 = LINE('',#40251,#40252); +#40251 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#40252 = VECTOR('',#40253,1.); +#40253 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40254 = PLANE('',#40255); +#40255 = AXIS2_PLACEMENT_3D('',#40256,#40257,#40258); +#40256 = CARTESIAN_POINT('',(-2.42560961319,0.43,0.548953137803)); +#40257 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40258 = DIRECTION('',(0.,-0.,1.)); +#40259 = ADVANCED_FACE('',(#40260),#40279,.F.); +#40260 = FACE_BOUND('',#40261,.F.); +#40261 = EDGE_LOOP('',(#40262,#40263,#40272,#40278)); +#40262 = ORIENTED_EDGE('',*,*,#38931,.T.); +#40263 = ORIENTED_EDGE('',*,*,#40264,.T.); +#40264 = EDGE_CURVE('',#38924,#40265,#40267,.T.); +#40265 = VERTEX_POINT('',#40266); +#40266 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767)); +#40267 = CIRCLE('',#40268,0.1); +#40268 = AXIS2_PLACEMENT_3D('',#40269,#40270,#40271); +#40269 = CARTESIAN_POINT('',(-2.25,0.84,0.725)); +#40270 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40271 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40272 = ORIENTED_EDGE('',*,*,#40273,.F.); +#40273 = EDGE_CURVE('',#40174,#40265,#40274,.T.); +#40274 = LINE('',#40275,#40276); +#40275 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#40276 = VECTOR('',#40277,1.); +#40277 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40278 = ORIENTED_EDGE('',*,*,#40173,.F.); +#40279 = CYLINDRICAL_SURFACE('',#40280,0.1); +#40280 = AXIS2_PLACEMENT_3D('',#40281,#40282,#40283); +#40281 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#40282 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#40283 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40284 = ADVANCED_FACE('',(#40285),#40363,.T.); +#40285 = FACE_BOUND('',#40286,.T.); +#40286 = EDGE_LOOP('',(#40287,#40288,#40289,#40290,#40298,#40307,#40315, + #40323,#40331,#40340,#40348,#40357)); +#40287 = ORIENTED_EDGE('',*,*,#38945,.F.); +#40288 = ORIENTED_EDGE('',*,*,#38923,.T.); +#40289 = ORIENTED_EDGE('',*,*,#40264,.T.); +#40290 = ORIENTED_EDGE('',*,*,#40291,.T.); +#40291 = EDGE_CURVE('',#40265,#40292,#40294,.T.); +#40292 = VERTEX_POINT('',#40293); +#40293 = CARTESIAN_POINT('',(-2.429496640897,0.84,0.2479055467)); +#40294 = LINE('',#40295,#40296); +#40295 = CARTESIAN_POINT('',(-2.348480775301,0.84,0.742364817767)); +#40296 = VECTOR('',#40297,1.); +#40297 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40298 = ORIENTED_EDGE('',*,*,#40299,.T.); +#40299 = EDGE_CURVE('',#40292,#40300,#40302,.T.); +#40300 = VERTEX_POINT('',#40301); +#40301 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16)); +#40302 = CIRCLE('',#40303,0.3); +#40303 = AXIS2_PLACEMENT_3D('',#40304,#40305,#40306); +#40304 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3)); +#40305 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40306 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40307 = ORIENTED_EDGE('',*,*,#40308,.T.); +#40308 = EDGE_CURVE('',#40300,#40309,#40311,.T.); +#40309 = VERTEX_POINT('',#40310); +#40310 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16)); +#40311 = LINE('',#40312,#40313); +#40312 = CARTESIAN_POINT('',(-2.724938966801,0.84,-1.665334536938E-16)); +#40313 = VECTOR('',#40314,1.); +#40314 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40315 = ORIENTED_EDGE('',*,*,#40316,.T.); +#40316 = EDGE_CURVE('',#40309,#40317,#40319,.T.); +#40317 = VERTEX_POINT('',#40318); +#40318 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#40319 = LINE('',#40320,#40321); +#40320 = CARTESIAN_POINT('',(-3.,0.84,-1.665334536938E-16)); +#40321 = VECTOR('',#40322,1.); +#40322 = DIRECTION('',(0.,0.,1.)); +#40323 = ORIENTED_EDGE('',*,*,#40324,.T.); +#40324 = EDGE_CURVE('',#40317,#40325,#40327,.T.); +#40325 = VERTEX_POINT('',#40326); +#40326 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.2)); +#40327 = LINE('',#40328,#40329); +#40328 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#40329 = VECTOR('',#40330,1.); +#40330 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40331 = ORIENTED_EDGE('',*,*,#40332,.T.); +#40332 = EDGE_CURVE('',#40325,#40333,#40335,.T.); +#40333 = VERTEX_POINT('',#40334); +#40334 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233)); +#40335 = CIRCLE('',#40336,0.1); +#40336 = AXIS2_PLACEMENT_3D('',#40337,#40338,#40339); +#40337 = CARTESIAN_POINT('',(-2.724938966801,0.84,0.3)); +#40338 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40339 = DIRECTION('',(0.,0.,-1.)); +#40340 = ORIENTED_EDGE('',*,*,#40341,.T.); +#40341 = EDGE_CURVE('',#40333,#40342,#40344,.T.); +#40342 = VERTEX_POINT('',#40343); +#40343 = CARTESIAN_POINT('',(-2.545442325904,0.84,0.7770944533)); +#40344 = LINE('',#40345,#40346); +#40345 = CARTESIAN_POINT('',(-2.6264581915,0.84,0.282635182233)); +#40346 = VECTOR('',#40347,1.); +#40347 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40348 = ORIENTED_EDGE('',*,*,#40349,.T.); +#40349 = EDGE_CURVE('',#40342,#40350,#40352,.T.); +#40350 = VERTEX_POINT('',#40351); +#40351 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#40352 = CIRCLE('',#40353,0.3); +#40353 = AXIS2_PLACEMENT_3D('',#40354,#40355,#40356); +#40354 = CARTESIAN_POINT('',(-2.25,0.84,0.725)); +#40355 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40356 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40357 = ORIENTED_EDGE('',*,*,#40358,.T.); +#40358 = EDGE_CURVE('',#40350,#38946,#40359,.T.); +#40359 = LINE('',#40360,#40361); +#40360 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#40361 = VECTOR('',#40362,1.); +#40362 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40363 = PLANE('',#40364); +#40364 = AXIS2_PLACEMENT_3D('',#40365,#40366,#40367); +#40365 = CARTESIAN_POINT('',(-2.42560961319,0.84,0.548953137803)); +#40366 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40367 = DIRECTION('',(0.,-0.,1.)); +#40368 = ADVANCED_FACE('',(#40369),#40380,.F.); +#40369 = FACE_BOUND('',#40370,.F.); +#40370 = EDGE_LOOP('',(#40371,#40372,#40373,#40374)); +#40371 = ORIENTED_EDGE('',*,*,#38962,.T.); +#40372 = ORIENTED_EDGE('',*,*,#39382,.T.); +#40373 = ORIENTED_EDGE('',*,*,#39446,.F.); +#40374 = ORIENTED_EDGE('',*,*,#40375,.F.); +#40375 = EDGE_CURVE('',#38946,#39439,#40376,.T.); +#40376 = LINE('',#40377,#40378); +#40377 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#40378 = VECTOR('',#40379,1.); +#40379 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40380 = PLANE('',#40381); +#40381 = AXIS2_PLACEMENT_3D('',#40382,#40383,#40384); +#40382 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40383 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40384 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40385 = ADVANCED_FACE('',(#40386),#40465,.F.); +#40386 = FACE_BOUND('',#40387,.F.); +#40387 = EDGE_LOOP('',(#40388,#40389,#40390,#40399,#40407,#40416,#40424, + #40432,#40440,#40449,#40457,#40464)); +#40388 = ORIENTED_EDGE('',*,*,#38954,.F.); +#40389 = ORIENTED_EDGE('',*,*,#38976,.T.); +#40390 = ORIENTED_EDGE('',*,*,#40391,.T.); +#40391 = EDGE_CURVE('',#38977,#40392,#40394,.T.); +#40392 = VERTEX_POINT('',#40393); +#40393 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#40394 = CIRCLE('',#40395,0.1); +#40395 = AXIS2_PLACEMENT_3D('',#40396,#40397,#40398); +#40396 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#40397 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40398 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40399 = ORIENTED_EDGE('',*,*,#40400,.T.); +#40400 = EDGE_CURVE('',#40392,#40401,#40403,.T.); +#40401 = VERTEX_POINT('',#40402); +#40402 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467)); +#40403 = LINE('',#40404,#40405); +#40404 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#40405 = VECTOR('',#40406,1.); +#40406 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40407 = ORIENTED_EDGE('',*,*,#40408,.T.); +#40408 = EDGE_CURVE('',#40401,#40409,#40411,.T.); +#40409 = VERTEX_POINT('',#40410); +#40410 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#40411 = CIRCLE('',#40412,0.3); +#40412 = AXIS2_PLACEMENT_3D('',#40413,#40414,#40415); +#40413 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#40414 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40415 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40416 = ORIENTED_EDGE('',*,*,#40417,.T.); +#40417 = EDGE_CURVE('',#40409,#40418,#40420,.T.); +#40418 = VERTEX_POINT('',#40419); +#40419 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#40420 = LINE('',#40421,#40422); +#40421 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#40422 = VECTOR('',#40423,1.); +#40423 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40424 = ORIENTED_EDGE('',*,*,#40425,.T.); +#40425 = EDGE_CURVE('',#40418,#40426,#40428,.T.); +#40426 = VERTEX_POINT('',#40427); +#40427 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#40428 = LINE('',#40429,#40430); +#40429 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#40430 = VECTOR('',#40431,1.); +#40431 = DIRECTION('',(0.,0.,1.)); +#40432 = ORIENTED_EDGE('',*,*,#40433,.T.); +#40433 = EDGE_CURVE('',#40426,#40434,#40436,.T.); +#40434 = VERTEX_POINT('',#40435); +#40435 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2)); +#40436 = LINE('',#40437,#40438); +#40437 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#40438 = VECTOR('',#40439,1.); +#40439 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40440 = ORIENTED_EDGE('',*,*,#40441,.T.); +#40441 = EDGE_CURVE('',#40434,#40442,#40444,.T.); +#40442 = VERTEX_POINT('',#40443); +#40443 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#40444 = CIRCLE('',#40445,0.1); +#40445 = AXIS2_PLACEMENT_3D('',#40446,#40447,#40448); +#40446 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#40447 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40448 = DIRECTION('',(0.,0.,-1.)); +#40449 = ORIENTED_EDGE('',*,*,#40450,.T.); +#40450 = EDGE_CURVE('',#40442,#40451,#40453,.T.); +#40451 = VERTEX_POINT('',#40452); +#40452 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533)); +#40453 = LINE('',#40454,#40455); +#40454 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#40455 = VECTOR('',#40456,1.); +#40456 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40457 = ORIENTED_EDGE('',*,*,#40458,.T.); +#40458 = EDGE_CURVE('',#40451,#39352,#40459,.T.); +#40459 = CIRCLE('',#40460,0.3); +#40460 = AXIS2_PLACEMENT_3D('',#40461,#40462,#40463); +#40461 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#40462 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40463 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40464 = ORIENTED_EDGE('',*,*,#39351,.T.); +#40465 = PLANE('',#40466); +#40466 = AXIS2_PLACEMENT_3D('',#40467,#40468,#40469); +#40467 = CARTESIAN_POINT('',(-2.42560961319,1.7,0.548953137803)); +#40468 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40469 = DIRECTION('',(0.,-0.,1.)); +#40470 = ADVANCED_FACE('',(#40471),#40490,.F.); +#40471 = FACE_BOUND('',#40472,.F.); +#40472 = EDGE_LOOP('',(#40473,#40474,#40483,#40489)); +#40473 = ORIENTED_EDGE('',*,*,#38993,.T.); +#40474 = ORIENTED_EDGE('',*,*,#40475,.T.); +#40475 = EDGE_CURVE('',#38986,#40476,#40478,.T.); +#40476 = VERTEX_POINT('',#40477); +#40477 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767)); +#40478 = CIRCLE('',#40479,0.1); +#40479 = AXIS2_PLACEMENT_3D('',#40480,#40481,#40482); +#40480 = CARTESIAN_POINT('',(-2.25,2.11,0.725)); +#40481 = DIRECTION('',(-1.144237745222E-17,-1.,3.483726818625E-47)); +#40482 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40483 = ORIENTED_EDGE('',*,*,#40484,.F.); +#40484 = EDGE_CURVE('',#40392,#40476,#40485,.T.); +#40485 = LINE('',#40486,#40487); +#40486 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#40487 = VECTOR('',#40488,1.); +#40488 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40489 = ORIENTED_EDGE('',*,*,#40391,.F.); +#40490 = CYLINDRICAL_SURFACE('',#40491,0.1); +#40491 = AXIS2_PLACEMENT_3D('',#40492,#40493,#40494); +#40492 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#40493 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#40494 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#40495 = ADVANCED_FACE('',(#40496),#40567,.T.); +#40496 = FACE_BOUND('',#40497,.T.); +#40497 = EDGE_LOOP('',(#40498,#40499,#40500,#40501,#40509,#40518,#40526, + #40534,#40542,#40551,#40559,#40566)); +#40498 = ORIENTED_EDGE('',*,*,#39007,.F.); +#40499 = ORIENTED_EDGE('',*,*,#38985,.T.); +#40500 = ORIENTED_EDGE('',*,*,#40475,.T.); +#40501 = ORIENTED_EDGE('',*,*,#40502,.T.); +#40502 = EDGE_CURVE('',#40476,#40503,#40505,.T.); +#40503 = VERTEX_POINT('',#40504); +#40504 = CARTESIAN_POINT('',(-2.429496640897,2.11,0.2479055467)); +#40505 = LINE('',#40506,#40507); +#40506 = CARTESIAN_POINT('',(-2.348480775301,2.11,0.742364817767)); +#40507 = VECTOR('',#40508,1.); +#40508 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#40509 = ORIENTED_EDGE('',*,*,#40510,.T.); +#40510 = EDGE_CURVE('',#40503,#40511,#40513,.T.); +#40511 = VERTEX_POINT('',#40512); +#40512 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16)); +#40513 = CIRCLE('',#40514,0.3); +#40514 = AXIS2_PLACEMENT_3D('',#40515,#40516,#40517); +#40515 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3)); +#40516 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40517 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#40518 = ORIENTED_EDGE('',*,*,#40519,.T.); +#40519 = EDGE_CURVE('',#40511,#40520,#40522,.T.); +#40520 = VERTEX_POINT('',#40521); +#40521 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16)); +#40522 = LINE('',#40523,#40524); +#40523 = CARTESIAN_POINT('',(-2.724938966801,2.11,-1.665334536938E-16)); +#40524 = VECTOR('',#40525,1.); +#40525 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#40526 = ORIENTED_EDGE('',*,*,#40527,.T.); +#40527 = EDGE_CURVE('',#40520,#40528,#40530,.T.); +#40528 = VERTEX_POINT('',#40529); +#40529 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#40530 = LINE('',#40531,#40532); +#40531 = CARTESIAN_POINT('',(-3.,2.11,-1.665334536938E-16)); +#40532 = VECTOR('',#40533,1.); +#40533 = DIRECTION('',(0.,0.,1.)); +#40534 = ORIENTED_EDGE('',*,*,#40535,.T.); +#40535 = EDGE_CURVE('',#40528,#40536,#40538,.T.); +#40536 = VERTEX_POINT('',#40537); +#40537 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.2)); +#40538 = LINE('',#40539,#40540); +#40539 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#40540 = VECTOR('',#40541,1.); +#40541 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#40542 = ORIENTED_EDGE('',*,*,#40543,.T.); +#40543 = EDGE_CURVE('',#40536,#40544,#40546,.T.); +#40544 = VERTEX_POINT('',#40545); +#40545 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233)); +#40546 = CIRCLE('',#40547,0.1); +#40547 = AXIS2_PLACEMENT_3D('',#40548,#40549,#40550); +#40548 = CARTESIAN_POINT('',(-2.724938966801,2.11,0.3)); +#40549 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#40550 = DIRECTION('',(0.,0.,-1.)); +#40551 = ORIENTED_EDGE('',*,*,#40552,.T.); +#40552 = EDGE_CURVE('',#40544,#40553,#40555,.T.); +#40553 = VERTEX_POINT('',#40554); +#40554 = CARTESIAN_POINT('',(-2.545442325904,2.11,0.7770944533)); +#40555 = LINE('',#40556,#40557); +#40556 = CARTESIAN_POINT('',(-2.6264581915,2.11,0.282635182233)); +#40557 = VECTOR('',#40558,1.); +#40558 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#40559 = ORIENTED_EDGE('',*,*,#40560,.T.); +#40560 = EDGE_CURVE('',#40553,#39360,#40561,.T.); +#40561 = CIRCLE('',#40562,0.3); +#40562 = AXIS2_PLACEMENT_3D('',#40563,#40564,#40565); +#40563 = CARTESIAN_POINT('',(-2.25,2.11,0.725)); +#40564 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#40565 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#40566 = ORIENTED_EDGE('',*,*,#39367,.T.); +#40567 = PLANE('',#40568); +#40568 = AXIS2_PLACEMENT_3D('',#40569,#40570,#40571); +#40569 = CARTESIAN_POINT('',(-2.42560961319,2.11,0.548953137803)); +#40570 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#40571 = DIRECTION('',(0.,-0.,1.)); +#40572 = ADVANCED_FACE('',(#40573),#40652,.F.); +#40573 = FACE_BOUND('',#40574,.F.); +#40574 = EDGE_LOOP('',(#40575,#40576,#40577,#40586,#40594,#40603,#40611, + #40619,#40627,#40636,#40644,#40651)); +#40575 = ORIENTED_EDGE('',*,*,#39026,.F.); +#40576 = ORIENTED_EDGE('',*,*,#39041,.T.); +#40577 = ORIENTED_EDGE('',*,*,#40578,.T.); +#40578 = EDGE_CURVE('',#39042,#40579,#40581,.T.); +#40579 = VERTEX_POINT('',#40580); +#40580 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#40581 = CIRCLE('',#40582,0.1); +#40582 = AXIS2_PLACEMENT_3D('',#40583,#40584,#40585); +#40583 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#40584 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40585 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40586 = ORIENTED_EDGE('',*,*,#40587,.T.); +#40587 = EDGE_CURVE('',#40579,#40588,#40590,.T.); +#40588 = VERTEX_POINT('',#40589); +#40589 = CARTESIAN_POINT('',(2.429496640897,2.11,0.2479055467)); +#40590 = LINE('',#40591,#40592); +#40591 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#40592 = VECTOR('',#40593,1.); +#40593 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40594 = ORIENTED_EDGE('',*,*,#40595,.T.); +#40595 = EDGE_CURVE('',#40588,#40596,#40598,.T.); +#40596 = VERTEX_POINT('',#40597); +#40597 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#40598 = CIRCLE('',#40599,0.3); +#40599 = AXIS2_PLACEMENT_3D('',#40600,#40601,#40602); +#40600 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#40601 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40602 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40603 = ORIENTED_EDGE('',*,*,#40604,.T.); +#40604 = EDGE_CURVE('',#40596,#40605,#40607,.T.); +#40605 = VERTEX_POINT('',#40606); +#40606 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#40607 = LINE('',#40608,#40609); +#40608 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#40609 = VECTOR('',#40610,1.); +#40610 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40611 = ORIENTED_EDGE('',*,*,#40612,.T.); +#40612 = EDGE_CURVE('',#40605,#40613,#40615,.T.); +#40613 = VERTEX_POINT('',#40614); +#40614 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#40615 = LINE('',#40616,#40617); +#40616 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#40617 = VECTOR('',#40618,1.); +#40618 = DIRECTION('',(0.,0.,1.)); +#40619 = ORIENTED_EDGE('',*,*,#40620,.T.); +#40620 = EDGE_CURVE('',#40613,#40621,#40623,.T.); +#40621 = VERTEX_POINT('',#40622); +#40622 = CARTESIAN_POINT('',(2.724938966801,2.11,0.2)); +#40623 = LINE('',#40624,#40625); +#40624 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#40625 = VECTOR('',#40626,1.); +#40626 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40627 = ORIENTED_EDGE('',*,*,#40628,.T.); +#40628 = EDGE_CURVE('',#40621,#40629,#40631,.T.); +#40629 = VERTEX_POINT('',#40630); +#40630 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#40631 = CIRCLE('',#40632,0.1); +#40632 = AXIS2_PLACEMENT_3D('',#40633,#40634,#40635); +#40633 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#40634 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40635 = DIRECTION('',(0.,0.,-1.)); +#40636 = ORIENTED_EDGE('',*,*,#40637,.T.); +#40637 = EDGE_CURVE('',#40629,#40638,#40640,.T.); +#40638 = VERTEX_POINT('',#40639); +#40639 = CARTESIAN_POINT('',(2.545442325904,2.11,0.7770944533)); +#40640 = LINE('',#40641,#40642); +#40641 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#40642 = VECTOR('',#40643,1.); +#40643 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40644 = ORIENTED_EDGE('',*,*,#40645,.T.); +#40645 = EDGE_CURVE('',#40638,#39639,#40646,.T.); +#40646 = CIRCLE('',#40647,0.3); +#40647 = AXIS2_PLACEMENT_3D('',#40648,#40649,#40650); +#40648 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#40649 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40650 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40651 = ORIENTED_EDGE('',*,*,#39638,.T.); +#40652 = PLANE('',#40653); +#40653 = AXIS2_PLACEMENT_3D('',#40654,#40655,#40656); +#40654 = CARTESIAN_POINT('',(2.42560961319,2.11,0.548953137803)); +#40655 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40656 = DIRECTION('',(0.,0.,1.)); +#40657 = ADVANCED_FACE('',(#40658),#40677,.F.); +#40658 = FACE_BOUND('',#40659,.F.); +#40659 = EDGE_LOOP('',(#40660,#40661,#40670,#40676)); +#40660 = ORIENTED_EDGE('',*,*,#39058,.T.); +#40661 = ORIENTED_EDGE('',*,*,#40662,.T.); +#40662 = EDGE_CURVE('',#39051,#40663,#40665,.T.); +#40663 = VERTEX_POINT('',#40664); +#40664 = CARTESIAN_POINT('',(2.348480775301,1.7,0.742364817767)); +#40665 = CIRCLE('',#40666,0.1); +#40666 = AXIS2_PLACEMENT_3D('',#40667,#40668,#40669); +#40667 = CARTESIAN_POINT('',(2.25,1.7,0.725)); +#40668 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40669 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40670 = ORIENTED_EDGE('',*,*,#40671,.F.); +#40671 = EDGE_CURVE('',#40579,#40663,#40672,.T.); +#40672 = LINE('',#40673,#40674); +#40673 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#40674 = VECTOR('',#40675,1.); +#40675 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40676 = ORIENTED_EDGE('',*,*,#40578,.F.); +#40677 = CYLINDRICAL_SURFACE('',#40678,0.1); +#40678 = AXIS2_PLACEMENT_3D('',#40679,#40680,#40681); +#40679 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#40680 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40681 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40682 = ADVANCED_FACE('',(#40683),#40754,.T.); +#40683 = FACE_BOUND('',#40684,.T.); +#40684 = EDGE_LOOP('',(#40685,#40686,#40687,#40688,#40696,#40705,#40713, + #40721,#40729,#40738,#40746,#40753)); +#40685 = ORIENTED_EDGE('',*,*,#39072,.F.); +#40686 = ORIENTED_EDGE('',*,*,#39050,.T.); +#40687 = ORIENTED_EDGE('',*,*,#40662,.T.); +#40688 = ORIENTED_EDGE('',*,*,#40689,.T.); +#40689 = EDGE_CURVE('',#40663,#40690,#40692,.T.); +#40690 = VERTEX_POINT('',#40691); +#40691 = CARTESIAN_POINT('',(2.429496640897,1.7,0.2479055467)); +#40692 = LINE('',#40693,#40694); +#40693 = CARTESIAN_POINT('',(2.348480775301,1.7,0.742364817767)); +#40694 = VECTOR('',#40695,1.); +#40695 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40696 = ORIENTED_EDGE('',*,*,#40697,.T.); +#40697 = EDGE_CURVE('',#40690,#40698,#40700,.T.); +#40698 = VERTEX_POINT('',#40699); +#40699 = CARTESIAN_POINT('',(2.724938966801,1.7,-1.665334536938E-16)); +#40700 = CIRCLE('',#40701,0.3); +#40701 = AXIS2_PLACEMENT_3D('',#40702,#40703,#40704); +#40702 = CARTESIAN_POINT('',(2.724938966801,1.7,0.3)); +#40703 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40704 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40705 = ORIENTED_EDGE('',*,*,#40706,.T.); +#40706 = EDGE_CURVE('',#40698,#40707,#40709,.T.); +#40707 = VERTEX_POINT('',#40708); +#40708 = CARTESIAN_POINT('',(3.,1.7,-1.665334536938E-16)); +#40709 = LINE('',#40710,#40711); +#40710 = CARTESIAN_POINT('',(2.724938966801,1.7,-1.665334536938E-16)); +#40711 = VECTOR('',#40712,1.); +#40712 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40713 = ORIENTED_EDGE('',*,*,#40714,.T.); +#40714 = EDGE_CURVE('',#40707,#40715,#40717,.T.); +#40715 = VERTEX_POINT('',#40716); +#40716 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#40717 = LINE('',#40718,#40719); +#40718 = CARTESIAN_POINT('',(3.,1.7,-1.665334536938E-16)); +#40719 = VECTOR('',#40720,1.); +#40720 = DIRECTION('',(0.,0.,1.)); +#40721 = ORIENTED_EDGE('',*,*,#40722,.T.); +#40722 = EDGE_CURVE('',#40715,#40723,#40725,.T.); +#40723 = VERTEX_POINT('',#40724); +#40724 = CARTESIAN_POINT('',(2.724938966801,1.7,0.2)); +#40725 = LINE('',#40726,#40727); +#40726 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#40727 = VECTOR('',#40728,1.); +#40728 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40729 = ORIENTED_EDGE('',*,*,#40730,.T.); +#40730 = EDGE_CURVE('',#40723,#40731,#40733,.T.); +#40731 = VERTEX_POINT('',#40732); +#40732 = CARTESIAN_POINT('',(2.6264581915,1.7,0.282635182233)); +#40733 = CIRCLE('',#40734,0.1); +#40734 = AXIS2_PLACEMENT_3D('',#40735,#40736,#40737); +#40735 = CARTESIAN_POINT('',(2.724938966801,1.7,0.3)); +#40736 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40737 = DIRECTION('',(0.,0.,-1.)); +#40738 = ORIENTED_EDGE('',*,*,#40739,.T.); +#40739 = EDGE_CURVE('',#40731,#40740,#40742,.T.); +#40740 = VERTEX_POINT('',#40741); +#40741 = CARTESIAN_POINT('',(2.545442325904,1.7,0.7770944533)); +#40742 = LINE('',#40743,#40744); +#40743 = CARTESIAN_POINT('',(2.6264581915,1.7,0.282635182233)); +#40744 = VECTOR('',#40745,1.); +#40745 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40746 = ORIENTED_EDGE('',*,*,#40747,.T.); +#40747 = EDGE_CURVE('',#40740,#39647,#40748,.T.); +#40748 = CIRCLE('',#40749,0.3); +#40749 = AXIS2_PLACEMENT_3D('',#40750,#40751,#40752); +#40750 = CARTESIAN_POINT('',(2.25,1.7,0.725)); +#40751 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40752 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40753 = ORIENTED_EDGE('',*,*,#39654,.T.); +#40754 = PLANE('',#40755); +#40755 = AXIS2_PLACEMENT_3D('',#40756,#40757,#40758); +#40756 = CARTESIAN_POINT('',(2.42560961319,1.7,0.548953137803)); +#40757 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40758 = DIRECTION('',(0.,0.,1.)); +#40759 = ADVANCED_FACE('',(#40760),#40771,.F.); +#40760 = FACE_BOUND('',#40761,.F.); +#40761 = EDGE_LOOP('',(#40762,#40763,#40764,#40770)); +#40762 = ORIENTED_EDGE('',*,*,#39660,.F.); +#40763 = ORIENTED_EDGE('',*,*,#39089,.T.); +#40764 = ORIENTED_EDGE('',*,*,#40765,.T.); +#40765 = EDGE_CURVE('',#39082,#39561,#40766,.T.); +#40766 = LINE('',#40767,#40768); +#40767 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#40768 = VECTOR('',#40769,1.); +#40769 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40770 = ORIENTED_EDGE('',*,*,#39560,.F.); +#40771 = PLANE('',#40772); +#40772 = AXIS2_PLACEMENT_3D('',#40773,#40774,#40775); +#40773 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40774 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40775 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40776 = ADVANCED_FACE('',(#40777),#40863,.F.); +#40777 = FACE_BOUND('',#40778,.F.); +#40778 = EDGE_LOOP('',(#40779,#40780,#40781,#40790,#40798,#40807,#40815, + #40823,#40831,#40840,#40848,#40857)); +#40779 = ORIENTED_EDGE('',*,*,#39081,.F.); +#40780 = ORIENTED_EDGE('',*,*,#39103,.T.); +#40781 = ORIENTED_EDGE('',*,*,#40782,.T.); +#40782 = EDGE_CURVE('',#39104,#40783,#40785,.T.); +#40783 = VERTEX_POINT('',#40784); +#40784 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#40785 = CIRCLE('',#40786,0.1); +#40786 = AXIS2_PLACEMENT_3D('',#40787,#40788,#40789); +#40787 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#40788 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40789 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40790 = ORIENTED_EDGE('',*,*,#40791,.T.); +#40791 = EDGE_CURVE('',#40783,#40792,#40794,.T.); +#40792 = VERTEX_POINT('',#40793); +#40793 = CARTESIAN_POINT('',(2.429496640897,0.84,0.2479055467)); +#40794 = LINE('',#40795,#40796); +#40795 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#40796 = VECTOR('',#40797,1.); +#40797 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40798 = ORIENTED_EDGE('',*,*,#40799,.T.); +#40799 = EDGE_CURVE('',#40792,#40800,#40802,.T.); +#40800 = VERTEX_POINT('',#40801); +#40801 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#40802 = CIRCLE('',#40803,0.3); +#40803 = AXIS2_PLACEMENT_3D('',#40804,#40805,#40806); +#40804 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#40805 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40806 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40807 = ORIENTED_EDGE('',*,*,#40808,.T.); +#40808 = EDGE_CURVE('',#40800,#40809,#40811,.T.); +#40809 = VERTEX_POINT('',#40810); +#40810 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#40811 = LINE('',#40812,#40813); +#40812 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#40813 = VECTOR('',#40814,1.); +#40814 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40815 = ORIENTED_EDGE('',*,*,#40816,.T.); +#40816 = EDGE_CURVE('',#40809,#40817,#40819,.T.); +#40817 = VERTEX_POINT('',#40818); +#40818 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#40819 = LINE('',#40820,#40821); +#40820 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#40821 = VECTOR('',#40822,1.); +#40822 = DIRECTION('',(0.,0.,1.)); +#40823 = ORIENTED_EDGE('',*,*,#40824,.T.); +#40824 = EDGE_CURVE('',#40817,#40825,#40827,.T.); +#40825 = VERTEX_POINT('',#40826); +#40826 = CARTESIAN_POINT('',(2.724938966801,0.84,0.2)); +#40827 = LINE('',#40828,#40829); +#40828 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#40829 = VECTOR('',#40830,1.); +#40830 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40831 = ORIENTED_EDGE('',*,*,#40832,.T.); +#40832 = EDGE_CURVE('',#40825,#40833,#40835,.T.); +#40833 = VERTEX_POINT('',#40834); +#40834 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#40835 = CIRCLE('',#40836,0.1); +#40836 = AXIS2_PLACEMENT_3D('',#40837,#40838,#40839); +#40837 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#40838 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40839 = DIRECTION('',(0.,0.,-1.)); +#40840 = ORIENTED_EDGE('',*,*,#40841,.T.); +#40841 = EDGE_CURVE('',#40833,#40842,#40844,.T.); +#40842 = VERTEX_POINT('',#40843); +#40843 = CARTESIAN_POINT('',(2.545442325904,0.84,0.7770944533)); +#40844 = LINE('',#40845,#40846); +#40845 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#40846 = VECTOR('',#40847,1.); +#40847 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40848 = ORIENTED_EDGE('',*,*,#40849,.T.); +#40849 = EDGE_CURVE('',#40842,#40850,#40852,.T.); +#40850 = VERTEX_POINT('',#40851); +#40851 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#40852 = CIRCLE('',#40853,0.3); +#40853 = AXIS2_PLACEMENT_3D('',#40854,#40855,#40856); +#40854 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#40855 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40856 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40857 = ORIENTED_EDGE('',*,*,#40858,.T.); +#40858 = EDGE_CURVE('',#40850,#39082,#40859,.T.); +#40859 = LINE('',#40860,#40861); +#40860 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#40861 = VECTOR('',#40862,1.); +#40862 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40863 = PLANE('',#40864); +#40864 = AXIS2_PLACEMENT_3D('',#40865,#40866,#40867); +#40865 = CARTESIAN_POINT('',(2.42560961319,0.84,0.548953137803)); +#40866 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40867 = DIRECTION('',(0.,0.,1.)); +#40868 = ADVANCED_FACE('',(#40869),#40888,.F.); +#40869 = FACE_BOUND('',#40870,.F.); +#40870 = EDGE_LOOP('',(#40871,#40872,#40881,#40887)); +#40871 = ORIENTED_EDGE('',*,*,#39120,.T.); +#40872 = ORIENTED_EDGE('',*,*,#40873,.T.); +#40873 = EDGE_CURVE('',#39113,#40874,#40876,.T.); +#40874 = VERTEX_POINT('',#40875); +#40875 = CARTESIAN_POINT('',(2.348480775301,0.43,0.742364817767)); +#40876 = CIRCLE('',#40877,0.1); +#40877 = AXIS2_PLACEMENT_3D('',#40878,#40879,#40880); +#40878 = CARTESIAN_POINT('',(2.25,0.43,0.725)); +#40879 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#40880 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40881 = ORIENTED_EDGE('',*,*,#40882,.F.); +#40882 = EDGE_CURVE('',#40783,#40874,#40883,.T.); +#40883 = LINE('',#40884,#40885); +#40884 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#40885 = VECTOR('',#40886,1.); +#40886 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40887 = ORIENTED_EDGE('',*,*,#40782,.F.); +#40888 = CYLINDRICAL_SURFACE('',#40889,0.1); +#40889 = AXIS2_PLACEMENT_3D('',#40890,#40891,#40892); +#40890 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#40891 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40892 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#40893 = ADVANCED_FACE('',(#40894),#40972,.T.); +#40894 = FACE_BOUND('',#40895,.T.); +#40895 = EDGE_LOOP('',(#40896,#40897,#40898,#40899,#40907,#40916,#40924, + #40932,#40940,#40949,#40957,#40966)); +#40896 = ORIENTED_EDGE('',*,*,#39134,.F.); +#40897 = ORIENTED_EDGE('',*,*,#39112,.T.); +#40898 = ORIENTED_EDGE('',*,*,#40873,.T.); +#40899 = ORIENTED_EDGE('',*,*,#40900,.T.); +#40900 = EDGE_CURVE('',#40874,#40901,#40903,.T.); +#40901 = VERTEX_POINT('',#40902); +#40902 = CARTESIAN_POINT('',(2.429496640897,0.43,0.2479055467)); +#40903 = LINE('',#40904,#40905); +#40904 = CARTESIAN_POINT('',(2.348480775301,0.43,0.742364817767)); +#40905 = VECTOR('',#40906,1.); +#40906 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#40907 = ORIENTED_EDGE('',*,*,#40908,.T.); +#40908 = EDGE_CURVE('',#40901,#40909,#40911,.T.); +#40909 = VERTEX_POINT('',#40910); +#40910 = CARTESIAN_POINT('',(2.724938966801,0.43,-1.665334536938E-16)); +#40911 = CIRCLE('',#40912,0.3); +#40912 = AXIS2_PLACEMENT_3D('',#40913,#40914,#40915); +#40913 = CARTESIAN_POINT('',(2.724938966801,0.43,0.3)); +#40914 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40915 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#40916 = ORIENTED_EDGE('',*,*,#40917,.T.); +#40917 = EDGE_CURVE('',#40909,#40918,#40920,.T.); +#40918 = VERTEX_POINT('',#40919); +#40919 = CARTESIAN_POINT('',(3.,0.43,-1.665334536938E-16)); +#40920 = LINE('',#40921,#40922); +#40921 = CARTESIAN_POINT('',(2.724938966801,0.43,-1.665334536938E-16)); +#40922 = VECTOR('',#40923,1.); +#40923 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#40924 = ORIENTED_EDGE('',*,*,#40925,.T.); +#40925 = EDGE_CURVE('',#40918,#40926,#40928,.T.); +#40926 = VERTEX_POINT('',#40927); +#40927 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#40928 = LINE('',#40929,#40930); +#40929 = CARTESIAN_POINT('',(3.,0.43,-1.665334536938E-16)); +#40930 = VECTOR('',#40931,1.); +#40931 = DIRECTION('',(0.,0.,1.)); +#40932 = ORIENTED_EDGE('',*,*,#40933,.T.); +#40933 = EDGE_CURVE('',#40926,#40934,#40936,.T.); +#40934 = VERTEX_POINT('',#40935); +#40935 = CARTESIAN_POINT('',(2.724938966801,0.43,0.2)); +#40936 = LINE('',#40937,#40938); +#40937 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#40938 = VECTOR('',#40939,1.); +#40939 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40940 = ORIENTED_EDGE('',*,*,#40941,.T.); +#40941 = EDGE_CURVE('',#40934,#40942,#40944,.T.); +#40942 = VERTEX_POINT('',#40943); +#40943 = CARTESIAN_POINT('',(2.6264581915,0.43,0.282635182233)); +#40944 = CIRCLE('',#40945,0.1); +#40945 = AXIS2_PLACEMENT_3D('',#40946,#40947,#40948); +#40946 = CARTESIAN_POINT('',(2.724938966801,0.43,0.3)); +#40947 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#40948 = DIRECTION('',(0.,0.,-1.)); +#40949 = ORIENTED_EDGE('',*,*,#40950,.T.); +#40950 = EDGE_CURVE('',#40942,#40951,#40953,.T.); +#40951 = VERTEX_POINT('',#40952); +#40952 = CARTESIAN_POINT('',(2.545442325904,0.43,0.7770944533)); +#40953 = LINE('',#40954,#40955); +#40954 = CARTESIAN_POINT('',(2.6264581915,0.43,0.282635182233)); +#40955 = VECTOR('',#40956,1.); +#40956 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#40957 = ORIENTED_EDGE('',*,*,#40958,.T.); +#40958 = EDGE_CURVE('',#40951,#40959,#40961,.T.); +#40959 = VERTEX_POINT('',#40960); +#40960 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#40961 = CIRCLE('',#40962,0.3); +#40962 = AXIS2_PLACEMENT_3D('',#40963,#40964,#40965); +#40963 = CARTESIAN_POINT('',(2.25,0.43,0.725)); +#40964 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#40965 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#40966 = ORIENTED_EDGE('',*,*,#40967,.T.); +#40967 = EDGE_CURVE('',#40959,#39135,#40968,.T.); +#40968 = LINE('',#40969,#40970); +#40969 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#40970 = VECTOR('',#40971,1.); +#40971 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40972 = PLANE('',#40973); +#40973 = AXIS2_PLACEMENT_3D('',#40974,#40975,#40976); +#40974 = CARTESIAN_POINT('',(2.42560961319,0.43,0.548953137803)); +#40975 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#40976 = DIRECTION('',(0.,0.,1.)); +#40977 = ADVANCED_FACE('',(#40978),#40994,.F.); +#40978 = FACE_BOUND('',#40979,.F.); +#40979 = EDGE_LOOP('',(#40980,#40986,#40987,#40993)); +#40980 = ORIENTED_EDGE('',*,*,#40981,.F.); +#40981 = EDGE_CURVE('',#39135,#39569,#40982,.T.); +#40982 = LINE('',#40983,#40984); +#40983 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#40984 = VECTOR('',#40985,1.); +#40985 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40986 = ORIENTED_EDGE('',*,*,#39151,.T.); +#40987 = ORIENTED_EDGE('',*,*,#40988,.T.); +#40988 = EDGE_CURVE('',#39144,#39577,#40989,.T.); +#40989 = LINE('',#40990,#40991); +#40990 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#40991 = VECTOR('',#40992,1.); +#40992 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#40993 = ORIENTED_EDGE('',*,*,#39576,.F.); +#40994 = PLANE('',#40995); +#40995 = AXIS2_PLACEMENT_3D('',#40996,#40997,#40998); +#40996 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#40997 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#40998 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#40999 = ADVANCED_FACE('',(#41000),#41086,.F.); +#41000 = FACE_BOUND('',#41001,.F.); +#41001 = EDGE_LOOP('',(#41002,#41003,#41004,#41013,#41021,#41030,#41038, + #41046,#41054,#41063,#41071,#41080)); +#41002 = ORIENTED_EDGE('',*,*,#39143,.F.); +#41003 = ORIENTED_EDGE('',*,*,#39165,.T.); +#41004 = ORIENTED_EDGE('',*,*,#41005,.T.); +#41005 = EDGE_CURVE('',#39166,#41006,#41008,.T.); +#41006 = VERTEX_POINT('',#41007); +#41007 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#41008 = CIRCLE('',#41009,0.1); +#41009 = AXIS2_PLACEMENT_3D('',#41010,#41011,#41012); +#41010 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#41011 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41012 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41013 = ORIENTED_EDGE('',*,*,#41014,.T.); +#41014 = EDGE_CURVE('',#41006,#41015,#41017,.T.); +#41015 = VERTEX_POINT('',#41016); +#41016 = CARTESIAN_POINT('',(2.429496640897,-0.43,0.2479055467)); +#41017 = LINE('',#41018,#41019); +#41018 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#41019 = VECTOR('',#41020,1.); +#41020 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41021 = ORIENTED_EDGE('',*,*,#41022,.T.); +#41022 = EDGE_CURVE('',#41015,#41023,#41025,.T.); +#41023 = VERTEX_POINT('',#41024); +#41024 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#41025 = CIRCLE('',#41026,0.3); +#41026 = AXIS2_PLACEMENT_3D('',#41027,#41028,#41029); +#41027 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#41028 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41029 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41030 = ORIENTED_EDGE('',*,*,#41031,.T.); +#41031 = EDGE_CURVE('',#41023,#41032,#41034,.T.); +#41032 = VERTEX_POINT('',#41033); +#41033 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#41034 = LINE('',#41035,#41036); +#41035 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#41036 = VECTOR('',#41037,1.); +#41037 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41038 = ORIENTED_EDGE('',*,*,#41039,.T.); +#41039 = EDGE_CURVE('',#41032,#41040,#41042,.T.); +#41040 = VERTEX_POINT('',#41041); +#41041 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#41042 = LINE('',#41043,#41044); +#41043 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#41044 = VECTOR('',#41045,1.); +#41045 = DIRECTION('',(0.,0.,1.)); +#41046 = ORIENTED_EDGE('',*,*,#41047,.T.); +#41047 = EDGE_CURVE('',#41040,#41048,#41050,.T.); +#41048 = VERTEX_POINT('',#41049); +#41049 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.2)); +#41050 = LINE('',#41051,#41052); +#41051 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#41052 = VECTOR('',#41053,1.); +#41053 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41054 = ORIENTED_EDGE('',*,*,#41055,.T.); +#41055 = EDGE_CURVE('',#41048,#41056,#41058,.T.); +#41056 = VERTEX_POINT('',#41057); +#41057 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#41058 = CIRCLE('',#41059,0.1); +#41059 = AXIS2_PLACEMENT_3D('',#41060,#41061,#41062); +#41060 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#41061 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41062 = DIRECTION('',(0.,0.,-1.)); +#41063 = ORIENTED_EDGE('',*,*,#41064,.T.); +#41064 = EDGE_CURVE('',#41056,#41065,#41067,.T.); +#41065 = VERTEX_POINT('',#41066); +#41066 = CARTESIAN_POINT('',(2.545442325904,-0.43,0.7770944533)); +#41067 = LINE('',#41068,#41069); +#41068 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#41069 = VECTOR('',#41070,1.); +#41070 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41071 = ORIENTED_EDGE('',*,*,#41072,.T.); +#41072 = EDGE_CURVE('',#41065,#41073,#41075,.T.); +#41073 = VERTEX_POINT('',#41074); +#41074 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41075 = CIRCLE('',#41076,0.3); +#41076 = AXIS2_PLACEMENT_3D('',#41077,#41078,#41079); +#41077 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#41078 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41079 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41080 = ORIENTED_EDGE('',*,*,#41081,.T.); +#41081 = EDGE_CURVE('',#41073,#39144,#41082,.T.); +#41082 = LINE('',#41083,#41084); +#41083 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41084 = VECTOR('',#41085,1.); +#41085 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41086 = PLANE('',#41087); +#41087 = AXIS2_PLACEMENT_3D('',#41088,#41089,#41090); +#41088 = CARTESIAN_POINT('',(2.42560961319,-0.43,0.548953137803)); +#41089 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41090 = DIRECTION('',(0.,0.,1.)); +#41091 = ADVANCED_FACE('',(#41092),#41111,.F.); +#41092 = FACE_BOUND('',#41093,.F.); +#41093 = EDGE_LOOP('',(#41094,#41095,#41104,#41110)); +#41094 = ORIENTED_EDGE('',*,*,#39182,.T.); +#41095 = ORIENTED_EDGE('',*,*,#41096,.T.); +#41096 = EDGE_CURVE('',#39175,#41097,#41099,.T.); +#41097 = VERTEX_POINT('',#41098); +#41098 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.742364817767)); +#41099 = CIRCLE('',#41100,0.1); +#41100 = AXIS2_PLACEMENT_3D('',#41101,#41102,#41103); +#41101 = CARTESIAN_POINT('',(2.25,-0.84,0.725)); +#41102 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41103 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41104 = ORIENTED_EDGE('',*,*,#41105,.F.); +#41105 = EDGE_CURVE('',#41006,#41097,#41106,.T.); +#41106 = LINE('',#41107,#41108); +#41107 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#41108 = VECTOR('',#41109,1.); +#41109 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41110 = ORIENTED_EDGE('',*,*,#41005,.F.); +#41111 = CYLINDRICAL_SURFACE('',#41112,0.1); +#41112 = AXIS2_PLACEMENT_3D('',#41113,#41114,#41115); +#41113 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#41114 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41115 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41116 = ADVANCED_FACE('',(#41117),#41195,.T.); +#41117 = FACE_BOUND('',#41118,.T.); +#41118 = EDGE_LOOP('',(#41119,#41120,#41121,#41122,#41130,#41139,#41147, + #41155,#41163,#41172,#41180,#41189)); +#41119 = ORIENTED_EDGE('',*,*,#39196,.F.); +#41120 = ORIENTED_EDGE('',*,*,#39174,.T.); +#41121 = ORIENTED_EDGE('',*,*,#41096,.T.); +#41122 = ORIENTED_EDGE('',*,*,#41123,.T.); +#41123 = EDGE_CURVE('',#41097,#41124,#41126,.T.); +#41124 = VERTEX_POINT('',#41125); +#41125 = CARTESIAN_POINT('',(2.429496640897,-0.84,0.2479055467)); +#41126 = LINE('',#41127,#41128); +#41127 = CARTESIAN_POINT('',(2.348480775301,-0.84,0.742364817767)); +#41128 = VECTOR('',#41129,1.); +#41129 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41130 = ORIENTED_EDGE('',*,*,#41131,.T.); +#41131 = EDGE_CURVE('',#41124,#41132,#41134,.T.); +#41132 = VERTEX_POINT('',#41133); +#41133 = CARTESIAN_POINT('',(2.724938966801,-0.84,-1.665334536938E-16)); +#41134 = CIRCLE('',#41135,0.3); +#41135 = AXIS2_PLACEMENT_3D('',#41136,#41137,#41138); +#41136 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.3)); +#41137 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41138 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41139 = ORIENTED_EDGE('',*,*,#41140,.T.); +#41140 = EDGE_CURVE('',#41132,#41141,#41143,.T.); +#41141 = VERTEX_POINT('',#41142); +#41142 = CARTESIAN_POINT('',(3.,-0.84,-1.665334536938E-16)); +#41143 = LINE('',#41144,#41145); +#41144 = CARTESIAN_POINT('',(2.724938966801,-0.84,-1.665334536938E-16)); +#41145 = VECTOR('',#41146,1.); +#41146 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41147 = ORIENTED_EDGE('',*,*,#41148,.T.); +#41148 = EDGE_CURVE('',#41141,#41149,#41151,.T.); +#41149 = VERTEX_POINT('',#41150); +#41150 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#41151 = LINE('',#41152,#41153); +#41152 = CARTESIAN_POINT('',(3.,-0.84,-1.665334536938E-16)); +#41153 = VECTOR('',#41154,1.); +#41154 = DIRECTION('',(0.,0.,1.)); +#41155 = ORIENTED_EDGE('',*,*,#41156,.T.); +#41156 = EDGE_CURVE('',#41149,#41157,#41159,.T.); +#41157 = VERTEX_POINT('',#41158); +#41158 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.2)); +#41159 = LINE('',#41160,#41161); +#41160 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#41161 = VECTOR('',#41162,1.); +#41162 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41163 = ORIENTED_EDGE('',*,*,#41164,.T.); +#41164 = EDGE_CURVE('',#41157,#41165,#41167,.T.); +#41165 = VERTEX_POINT('',#41166); +#41166 = CARTESIAN_POINT('',(2.6264581915,-0.84,0.282635182233)); +#41167 = CIRCLE('',#41168,0.1); +#41168 = AXIS2_PLACEMENT_3D('',#41169,#41170,#41171); +#41169 = CARTESIAN_POINT('',(2.724938966801,-0.84,0.3)); +#41170 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41171 = DIRECTION('',(0.,0.,-1.)); +#41172 = ORIENTED_EDGE('',*,*,#41173,.T.); +#41173 = EDGE_CURVE('',#41165,#41174,#41176,.T.); +#41174 = VERTEX_POINT('',#41175); +#41175 = CARTESIAN_POINT('',(2.545442325904,-0.84,0.7770944533)); +#41176 = LINE('',#41177,#41178); +#41177 = CARTESIAN_POINT('',(2.6264581915,-0.84,0.282635182233)); +#41178 = VECTOR('',#41179,1.); +#41179 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41180 = ORIENTED_EDGE('',*,*,#41181,.T.); +#41181 = EDGE_CURVE('',#41174,#41182,#41184,.T.); +#41182 = VERTEX_POINT('',#41183); +#41183 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#41184 = CIRCLE('',#41185,0.3); +#41185 = AXIS2_PLACEMENT_3D('',#41186,#41187,#41188); +#41186 = CARTESIAN_POINT('',(2.25,-0.84,0.725)); +#41187 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41188 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41189 = ORIENTED_EDGE('',*,*,#41190,.T.); +#41190 = EDGE_CURVE('',#41182,#39197,#41191,.T.); +#41191 = LINE('',#41192,#41193); +#41192 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#41193 = VECTOR('',#41194,1.); +#41194 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41195 = PLANE('',#41196); +#41196 = AXIS2_PLACEMENT_3D('',#41197,#41198,#41199); +#41197 = CARTESIAN_POINT('',(2.42560961319,-0.84,0.548953137803)); +#41198 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41199 = DIRECTION('',(0.,0.,1.)); +#41200 = ADVANCED_FACE('',(#41201),#41217,.F.); +#41201 = FACE_BOUND('',#41202,.F.); +#41202 = EDGE_LOOP('',(#41203,#41209,#41210,#41216)); +#41203 = ORIENTED_EDGE('',*,*,#41204,.F.); +#41204 = EDGE_CURVE('',#39197,#39585,#41205,.T.); +#41205 = LINE('',#41206,#41207); +#41206 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#41207 = VECTOR('',#41208,1.); +#41208 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41209 = ORIENTED_EDGE('',*,*,#39213,.T.); +#41210 = ORIENTED_EDGE('',*,*,#41211,.T.); +#41211 = EDGE_CURVE('',#39206,#39593,#41212,.T.); +#41212 = LINE('',#41213,#41214); +#41213 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41214 = VECTOR('',#41215,1.); +#41215 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41216 = ORIENTED_EDGE('',*,*,#39592,.F.); +#41217 = PLANE('',#41218); +#41218 = AXIS2_PLACEMENT_3D('',#41219,#41220,#41221); +#41219 = CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,1.025)); +#41220 = DIRECTION('',(2.007919022429E-31,-7.713306628828E-27,-1.)); +#41221 = DIRECTION('',(1.,1.112083013911E-16,2.00791902242E-31)); +#41222 = ADVANCED_FACE('',(#41223),#41309,.F.); +#41223 = FACE_BOUND('',#41224,.F.); +#41224 = EDGE_LOOP('',(#41225,#41226,#41227,#41236,#41244,#41253,#41261, + #41269,#41277,#41286,#41294,#41303)); +#41225 = ORIENTED_EDGE('',*,*,#39205,.F.); +#41226 = ORIENTED_EDGE('',*,*,#39227,.T.); +#41227 = ORIENTED_EDGE('',*,*,#41228,.T.); +#41228 = EDGE_CURVE('',#39228,#41229,#41231,.T.); +#41229 = VERTEX_POINT('',#41230); +#41230 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#41231 = CIRCLE('',#41232,0.1); +#41232 = AXIS2_PLACEMENT_3D('',#41233,#41234,#41235); +#41233 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#41234 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41235 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41236 = ORIENTED_EDGE('',*,*,#41237,.T.); +#41237 = EDGE_CURVE('',#41229,#41238,#41240,.T.); +#41238 = VERTEX_POINT('',#41239); +#41239 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467)); +#41240 = LINE('',#41241,#41242); +#41241 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#41242 = VECTOR('',#41243,1.); +#41243 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41244 = ORIENTED_EDGE('',*,*,#41245,.T.); +#41245 = EDGE_CURVE('',#41238,#41246,#41248,.T.); +#41246 = VERTEX_POINT('',#41247); +#41247 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#41248 = CIRCLE('',#41249,0.3); +#41249 = AXIS2_PLACEMENT_3D('',#41250,#41251,#41252); +#41250 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#41251 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41252 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41253 = ORIENTED_EDGE('',*,*,#41254,.T.); +#41254 = EDGE_CURVE('',#41246,#41255,#41257,.T.); +#41255 = VERTEX_POINT('',#41256); +#41256 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#41257 = LINE('',#41258,#41259); +#41258 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#41259 = VECTOR('',#41260,1.); +#41260 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41261 = ORIENTED_EDGE('',*,*,#41262,.T.); +#41262 = EDGE_CURVE('',#41255,#41263,#41265,.T.); +#41263 = VERTEX_POINT('',#41264); +#41264 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#41265 = LINE('',#41266,#41267); +#41266 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#41267 = VECTOR('',#41268,1.); +#41268 = DIRECTION('',(0.,0.,1.)); +#41269 = ORIENTED_EDGE('',*,*,#41270,.T.); +#41270 = EDGE_CURVE('',#41263,#41271,#41273,.T.); +#41271 = VERTEX_POINT('',#41272); +#41272 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2)); +#41273 = LINE('',#41274,#41275); +#41274 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#41275 = VECTOR('',#41276,1.); +#41276 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41277 = ORIENTED_EDGE('',*,*,#41278,.T.); +#41278 = EDGE_CURVE('',#41271,#41279,#41281,.T.); +#41279 = VERTEX_POINT('',#41280); +#41280 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#41281 = CIRCLE('',#41282,0.1); +#41282 = AXIS2_PLACEMENT_3D('',#41283,#41284,#41285); +#41283 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#41284 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41285 = DIRECTION('',(0.,0.,-1.)); +#41286 = ORIENTED_EDGE('',*,*,#41287,.T.); +#41287 = EDGE_CURVE('',#41279,#41288,#41290,.T.); +#41288 = VERTEX_POINT('',#41289); +#41289 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533)); +#41290 = LINE('',#41291,#41292); +#41291 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#41292 = VECTOR('',#41293,1.); +#41293 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41294 = ORIENTED_EDGE('',*,*,#41295,.T.); +#41295 = EDGE_CURVE('',#41288,#41296,#41298,.T.); +#41296 = VERTEX_POINT('',#41297); +#41297 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41298 = CIRCLE('',#41299,0.3); +#41299 = AXIS2_PLACEMENT_3D('',#41300,#41301,#41302); +#41300 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#41301 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41302 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41303 = ORIENTED_EDGE('',*,*,#41304,.T.); +#41304 = EDGE_CURVE('',#41296,#39206,#41305,.T.); +#41305 = LINE('',#41306,#41307); +#41306 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41307 = VECTOR('',#41308,1.); +#41308 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41309 = PLANE('',#41310); +#41310 = AXIS2_PLACEMENT_3D('',#41311,#41312,#41313); +#41311 = CARTESIAN_POINT('',(2.42560961319,-1.7,0.548953137803)); +#41312 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41313 = DIRECTION('',(0.,0.,1.)); +#41314 = ADVANCED_FACE('',(#41315),#41334,.F.); +#41315 = FACE_BOUND('',#41316,.F.); +#41316 = EDGE_LOOP('',(#41317,#41318,#41327,#41333)); +#41317 = ORIENTED_EDGE('',*,*,#39244,.T.); +#41318 = ORIENTED_EDGE('',*,*,#41319,.T.); +#41319 = EDGE_CURVE('',#39237,#41320,#41322,.T.); +#41320 = VERTEX_POINT('',#41321); +#41321 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767)); +#41322 = CIRCLE('',#41323,0.1); +#41323 = AXIS2_PLACEMENT_3D('',#41324,#41325,#41326); +#41324 = CARTESIAN_POINT('',(2.25,-2.11,0.725)); +#41325 = DIRECTION('',(-1.110223024625E-16,1.,2.189528849922E-47)); +#41326 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41327 = ORIENTED_EDGE('',*,*,#41328,.F.); +#41328 = EDGE_CURVE('',#41229,#41320,#41329,.T.); +#41329 = LINE('',#41330,#41331); +#41330 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#41331 = VECTOR('',#41332,1.); +#41332 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41333 = ORIENTED_EDGE('',*,*,#41228,.F.); +#41334 = CYLINDRICAL_SURFACE('',#41335,0.1); +#41335 = AXIS2_PLACEMENT_3D('',#41336,#41337,#41338); +#41336 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#41337 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41338 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#41339 = ADVANCED_FACE('',(#41340),#41418,.T.); +#41340 = FACE_BOUND('',#41341,.T.); +#41341 = EDGE_LOOP('',(#41342,#41343,#41344,#41345,#41353,#41362,#41370, + #41378,#41386,#41395,#41403,#41412)); +#41342 = ORIENTED_EDGE('',*,*,#39258,.F.); +#41343 = ORIENTED_EDGE('',*,*,#39236,.T.); +#41344 = ORIENTED_EDGE('',*,*,#41319,.T.); +#41345 = ORIENTED_EDGE('',*,*,#41346,.T.); +#41346 = EDGE_CURVE('',#41320,#41347,#41349,.T.); +#41347 = VERTEX_POINT('',#41348); +#41348 = CARTESIAN_POINT('',(2.429496640897,-2.11,0.2479055467)); +#41349 = LINE('',#41350,#41351); +#41350 = CARTESIAN_POINT('',(2.348480775301,-2.11,0.742364817767)); +#41351 = VECTOR('',#41352,1.); +#41352 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#41353 = ORIENTED_EDGE('',*,*,#41354,.T.); +#41354 = EDGE_CURVE('',#41347,#41355,#41357,.T.); +#41355 = VERTEX_POINT('',#41356); +#41356 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16)); +#41357 = CIRCLE('',#41358,0.3); +#41358 = AXIS2_PLACEMENT_3D('',#41359,#41360,#41361); +#41359 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3)); +#41360 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41361 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#41362 = ORIENTED_EDGE('',*,*,#41363,.T.); +#41363 = EDGE_CURVE('',#41355,#41364,#41366,.T.); +#41364 = VERTEX_POINT('',#41365); +#41365 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16)); +#41366 = LINE('',#41367,#41368); +#41367 = CARTESIAN_POINT('',(2.724938966801,-2.11,-1.665334536938E-16)); +#41368 = VECTOR('',#41369,1.); +#41369 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#41370 = ORIENTED_EDGE('',*,*,#41371,.T.); +#41371 = EDGE_CURVE('',#41364,#41372,#41374,.T.); +#41372 = VERTEX_POINT('',#41373); +#41373 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#41374 = LINE('',#41375,#41376); +#41375 = CARTESIAN_POINT('',(3.,-2.11,-1.665334536938E-16)); +#41376 = VECTOR('',#41377,1.); +#41377 = DIRECTION('',(0.,0.,1.)); +#41378 = ORIENTED_EDGE('',*,*,#41379,.T.); +#41379 = EDGE_CURVE('',#41372,#41380,#41382,.T.); +#41380 = VERTEX_POINT('',#41381); +#41381 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.2)); +#41382 = LINE('',#41383,#41384); +#41383 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#41384 = VECTOR('',#41385,1.); +#41385 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41386 = ORIENTED_EDGE('',*,*,#41387,.T.); +#41387 = EDGE_CURVE('',#41380,#41388,#41390,.T.); +#41388 = VERTEX_POINT('',#41389); +#41389 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233)); +#41390 = CIRCLE('',#41391,0.1); +#41391 = AXIS2_PLACEMENT_3D('',#41392,#41393,#41394); +#41392 = CARTESIAN_POINT('',(2.724938966801,-2.11,0.3)); +#41393 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41394 = DIRECTION('',(0.,0.,-1.)); +#41395 = ORIENTED_EDGE('',*,*,#41396,.T.); +#41396 = EDGE_CURVE('',#41388,#41397,#41399,.T.); +#41397 = VERTEX_POINT('',#41398); +#41398 = CARTESIAN_POINT('',(2.545442325904,-2.11,0.7770944533)); +#41399 = LINE('',#41400,#41401); +#41400 = CARTESIAN_POINT('',(2.6264581915,-2.11,0.282635182233)); +#41401 = VECTOR('',#41402,1.); +#41402 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#41403 = ORIENTED_EDGE('',*,*,#41404,.T.); +#41404 = EDGE_CURVE('',#41397,#41405,#41407,.T.); +#41405 = VERTEX_POINT('',#41406); +#41406 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#41407 = CIRCLE('',#41408,0.3); +#41408 = AXIS2_PLACEMENT_3D('',#41409,#41410,#41411); +#41409 = CARTESIAN_POINT('',(2.25,-2.11,0.725)); +#41410 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#41411 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41412 = ORIENTED_EDGE('',*,*,#41413,.T.); +#41413 = EDGE_CURVE('',#41405,#39259,#41414,.T.); +#41414 = LINE('',#41415,#41416); +#41415 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#41416 = VECTOR('',#41417,1.); +#41417 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41418 = PLANE('',#41419); +#41419 = AXIS2_PLACEMENT_3D('',#41420,#41421,#41422); +#41420 = CARTESIAN_POINT('',(2.42560961319,-2.11,0.548953137803)); +#41421 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41422 = DIRECTION('',(0.,0.,1.)); +#41423 = ADVANCED_FACE('',(#41424),#41435,.T.); +#41424 = FACE_BOUND('',#41425,.T.); +#41425 = EDGE_LOOP('',(#41426,#41427,#41428,#41429)); +#41426 = ORIENTED_EDGE('',*,*,#40458,.T.); +#41427 = ORIENTED_EDGE('',*,*,#39359,.T.); +#41428 = ORIENTED_EDGE('',*,*,#40560,.F.); +#41429 = ORIENTED_EDGE('',*,*,#41430,.F.); +#41430 = EDGE_CURVE('',#40451,#40553,#41431,.T.); +#41431 = LINE('',#41432,#41433); +#41432 = CARTESIAN_POINT('',(-2.545442325904,1.7,0.7770944533)); +#41433 = VECTOR('',#41434,1.); +#41434 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41435 = CYLINDRICAL_SURFACE('',#41436,0.3); +#41436 = AXIS2_PLACEMENT_3D('',#41437,#41438,#41439); +#41437 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#41438 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41439 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41440 = ADVANCED_FACE('',(#41441),#41454,.F.); +#41441 = FACE_BOUND('',#41442,.F.); +#41442 = EDGE_LOOP('',(#41443,#41444,#41450,#41451,#41452,#41453)); +#41443 = ORIENTED_EDGE('',*,*,#39803,.F.); +#41444 = ORIENTED_EDGE('',*,*,#41445,.T.); +#41445 = EDGE_CURVE('',#39795,#39904,#41446,.T.); +#41446 = LINE('',#41447,#41448); +#41447 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#41448 = VECTOR('',#41449,1.); +#41449 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41450 = ORIENTED_EDGE('',*,*,#39912,.T.); +#41451 = ORIENTED_EDGE('',*,*,#39934,.T.); +#41452 = ORIENTED_EDGE('',*,*,#39406,.F.); +#41453 = ORIENTED_EDGE('',*,*,#39677,.F.); +#41454 = PLANE('',#41455); +#41455 = AXIS2_PLACEMENT_3D('',#41456,#41457,#41458); +#41456 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#41457 = DIRECTION('',(0.,0.,-1.)); +#41458 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41459 = ADVANCED_FACE('',(#41460),#41473,.F.); +#41460 = FACE_BOUND('',#41461,.F.); +#41461 = EDGE_LOOP('',(#41462,#41463,#41469,#41470,#41471,#41472)); +#41462 = ORIENTED_EDGE('',*,*,#40026,.F.); +#41463 = ORIENTED_EDGE('',*,*,#41464,.T.); +#41464 = EDGE_CURVE('',#40018,#40127,#41465,.T.); +#41465 = LINE('',#41466,#41467); +#41466 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#41467 = VECTOR('',#41468,1.); +#41468 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41469 = ORIENTED_EDGE('',*,*,#40135,.T.); +#41470 = ORIENTED_EDGE('',*,*,#40157,.T.); +#41471 = ORIENTED_EDGE('',*,*,#39422,.F.); +#41472 = ORIENTED_EDGE('',*,*,#39927,.F.); +#41473 = PLANE('',#41474); +#41474 = AXIS2_PLACEMENT_3D('',#41475,#41476,#41477); +#41475 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#41476 = DIRECTION('',(0.,0.,-1.)); +#41477 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41478 = ADVANCED_FACE('',(#41479),#41492,.F.); +#41479 = FACE_BOUND('',#41480,.F.); +#41480 = EDGE_LOOP('',(#41481,#41482,#41488,#41489,#41490,#41491)); +#41481 = ORIENTED_EDGE('',*,*,#40249,.F.); +#41482 = ORIENTED_EDGE('',*,*,#41483,.T.); +#41483 = EDGE_CURVE('',#40241,#40350,#41484,.T.); +#41484 = LINE('',#41485,#41486); +#41485 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#41486 = VECTOR('',#41487,1.); +#41487 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41488 = ORIENTED_EDGE('',*,*,#40358,.T.); +#41489 = ORIENTED_EDGE('',*,*,#40375,.T.); +#41490 = ORIENTED_EDGE('',*,*,#39438,.F.); +#41491 = ORIENTED_EDGE('',*,*,#40150,.F.); +#41492 = PLANE('',#41493); +#41493 = AXIS2_PLACEMENT_3D('',#41494,#41495,#41496); +#41494 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#41495 = DIRECTION('',(0.,0.,-1.)); +#41496 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41497 = ADVANCED_FACE('',(#41498,#41527),#41538,.F.); +#41498 = FACE_BOUND('',#41499,.F.); +#41499 = EDGE_LOOP('',(#41500,#41501,#41502,#41503,#41511,#41519,#41525, + #41526)); +#41500 = ORIENTED_EDGE('',*,*,#39513,.T.); +#41501 = ORIENTED_EDGE('',*,*,#39536,.T.); +#41502 = ORIENTED_EDGE('',*,*,#39623,.T.); +#41503 = ORIENTED_EDGE('',*,*,#41504,.T.); +#41504 = EDGE_CURVE('',#39617,#41505,#41507,.T.); +#41505 = VERTEX_POINT('',#41506); +#41506 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41507 = LINE('',#41508,#41509); +#41508 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#41509 = VECTOR('',#41510,1.); +#41510 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#41511 = ORIENTED_EDGE('',*,*,#41512,.T.); +#41512 = EDGE_CURVE('',#41505,#41513,#41515,.T.); +#41513 = VERTEX_POINT('',#41514); +#41514 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41515 = LINE('',#41516,#41517); +#41516 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41517 = VECTOR('',#41518,1.); +#41518 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#41519 = ORIENTED_EDGE('',*,*,#41520,.T.); +#41520 = EDGE_CURVE('',#41513,#39462,#41521,.T.); +#41521 = LINE('',#41522,#41523); +#41522 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41523 = VECTOR('',#41524,1.); +#41524 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#41525 = ORIENTED_EDGE('',*,*,#39461,.T.); +#41526 = ORIENTED_EDGE('',*,*,#39490,.T.); +#41527 = FACE_BOUND('',#41528,.F.); +#41528 = EDGE_LOOP('',(#41529)); +#41529 = ORIENTED_EDGE('',*,*,#41530,.F.); +#41530 = EDGE_CURVE('',#41531,#41531,#41533,.T.); +#41531 = VERTEX_POINT('',#41532); +#41532 = CARTESIAN_POINT('',(-1.110171280765,1.310171280765,1.75)); +#41533 = CIRCLE('',#41534,0.3); +#41534 = AXIS2_PLACEMENT_3D('',#41535,#41536,#41537); +#41535 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.75)); +#41536 = DIRECTION('',(0.,-0.,-1.)); +#41537 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41538 = PLANE('',#41539); +#41539 = AXIS2_PLACEMENT_3D('',#41540,#41541,#41542); +#41540 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#41541 = DIRECTION('',(0.,0.,-1.)); +#41542 = DIRECTION('',(0.596575959062,-0.802556617983,0.)); +#41543 = ADVANCED_FACE('',(#41544),#41554,.F.); +#41544 = FACE_BOUND('',#41545,.F.); +#41545 = EDGE_LOOP('',(#41546,#41547,#41548,#41549)); +#41546 = ORIENTED_EDGE('',*,*,#39684,.T.); +#41547 = ORIENTED_EDGE('',*,*,#39469,.T.); +#41548 = ORIENTED_EDGE('',*,*,#41520,.F.); +#41549 = ORIENTED_EDGE('',*,*,#41550,.F.); +#41550 = EDGE_CURVE('',#39685,#41513,#41551,.T.); +#41551 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#41552,#41553),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#41552 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#41553 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41554 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#41555,#41556) + ,(#41557,#41558 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#41555 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#41556 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41557 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#41558 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#41559 = ADVANCED_FACE('',(#41560),#41573,.F.); +#41560 = FACE_BOUND('',#41561,.F.); +#41561 = EDGE_LOOP('',(#41562,#41563,#41569,#41570,#41571,#41572)); +#41562 = ORIENTED_EDGE('',*,*,#40858,.F.); +#41563 = ORIENTED_EDGE('',*,*,#41564,.T.); +#41564 = EDGE_CURVE('',#40850,#40959,#41565,.T.); +#41565 = LINE('',#41566,#41567); +#41566 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#41567 = VECTOR('',#41568,1.); +#41568 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41569 = ORIENTED_EDGE('',*,*,#40967,.T.); +#41570 = ORIENTED_EDGE('',*,*,#40981,.T.); +#41571 = ORIENTED_EDGE('',*,*,#39568,.F.); +#41572 = ORIENTED_EDGE('',*,*,#40765,.F.); +#41573 = PLANE('',#41574); +#41574 = AXIS2_PLACEMENT_3D('',#41575,#41576,#41577); +#41575 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#41576 = DIRECTION('',(0.,0.,-1.)); +#41577 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#41578 = ADVANCED_FACE('',(#41579),#41592,.F.); +#41579 = FACE_BOUND('',#41580,.F.); +#41580 = EDGE_LOOP('',(#41581,#41582,#41588,#41589,#41590,#41591)); +#41581 = ORIENTED_EDGE('',*,*,#41081,.F.); +#41582 = ORIENTED_EDGE('',*,*,#41583,.T.); +#41583 = EDGE_CURVE('',#41073,#41182,#41584,.T.); +#41584 = LINE('',#41585,#41586); +#41585 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41586 = VECTOR('',#41587,1.); +#41587 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41588 = ORIENTED_EDGE('',*,*,#41190,.T.); +#41589 = ORIENTED_EDGE('',*,*,#41204,.T.); +#41590 = ORIENTED_EDGE('',*,*,#39584,.F.); +#41591 = ORIENTED_EDGE('',*,*,#40988,.F.); +#41592 = PLANE('',#41593); +#41593 = AXIS2_PLACEMENT_3D('',#41594,#41595,#41596); +#41594 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#41595 = DIRECTION('',(0.,0.,-1.)); +#41596 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#41597 = ADVANCED_FACE('',(#41598),#41611,.F.); +#41598 = FACE_BOUND('',#41599,.F.); +#41599 = EDGE_LOOP('',(#41600,#41601,#41607,#41608,#41609,#41610)); +#41600 = ORIENTED_EDGE('',*,*,#41304,.F.); +#41601 = ORIENTED_EDGE('',*,*,#41602,.T.); +#41602 = EDGE_CURVE('',#41296,#41405,#41603,.T.); +#41603 = LINE('',#41604,#41605); +#41604 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41605 = VECTOR('',#41606,1.); +#41606 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41607 = ORIENTED_EDGE('',*,*,#41413,.T.); +#41608 = ORIENTED_EDGE('',*,*,#39707,.T.); +#41609 = ORIENTED_EDGE('',*,*,#39600,.F.); +#41610 = ORIENTED_EDGE('',*,*,#41211,.F.); +#41611 = PLANE('',#41612); +#41612 = AXIS2_PLACEMENT_3D('',#41613,#41614,#41615); +#41613 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#41614 = DIRECTION('',(0.,0.,-1.)); +#41615 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#41616 = ADVANCED_FACE('',(#41617),#41627,.F.); +#41617 = FACE_BOUND('',#41618,.F.); +#41618 = EDGE_LOOP('',(#41619,#41620,#41625,#41626)); +#41619 = ORIENTED_EDGE('',*,*,#39700,.T.); +#41620 = ORIENTED_EDGE('',*,*,#41621,.T.); +#41621 = EDGE_CURVE('',#39693,#41505,#41622,.T.); +#41622 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#41623,#41624),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#41623 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#41624 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41625 = ORIENTED_EDGE('',*,*,#41504,.F.); +#41626 = ORIENTED_EDGE('',*,*,#39616,.F.); +#41627 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#41628,#41629) + ,(#41630,#41631 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#41628 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#41629 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#41630 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#41631 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41632 = ADVANCED_FACE('',(#41633),#41644,.T.); +#41633 = FACE_BOUND('',#41634,.T.); +#41634 = EDGE_LOOP('',(#41635,#41636,#41637,#41638)); +#41635 = ORIENTED_EDGE('',*,*,#40645,.T.); +#41636 = ORIENTED_EDGE('',*,*,#39646,.T.); +#41637 = ORIENTED_EDGE('',*,*,#40747,.F.); +#41638 = ORIENTED_EDGE('',*,*,#41639,.F.); +#41639 = EDGE_CURVE('',#40638,#40740,#41640,.T.); +#41640 = LINE('',#41641,#41642); +#41641 = CARTESIAN_POINT('',(2.545442325904,2.11,0.7770944533)); +#41642 = VECTOR('',#41643,1.); +#41643 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#41644 = CYLINDRICAL_SURFACE('',#41645,0.3); +#41645 = AXIS2_PLACEMENT_3D('',#41646,#41647,#41648); +#41646 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#41647 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#41648 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#41649 = ADVANCED_FACE('',(#41650),#41656,.F.); +#41650 = FACE_BOUND('',#41651,.F.); +#41651 = EDGE_LOOP('',(#41652,#41653,#41654,#41655)); +#41652 = ORIENTED_EDGE('',*,*,#39692,.T.); +#41653 = ORIENTED_EDGE('',*,*,#41550,.T.); +#41654 = ORIENTED_EDGE('',*,*,#41512,.F.); +#41655 = ORIENTED_EDGE('',*,*,#41621,.F.); +#41656 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#41657,#41658) + ,(#41659,#41660 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#41657 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#41658 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#41659 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#41660 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#41661 = ADVANCED_FACE('',(#41662),#41673,.T.); +#41662 = FACE_BOUND('',#41663,.T.); +#41663 = EDGE_LOOP('',(#41664,#41665,#41666,#41667)); +#41664 = ORIENTED_EDGE('',*,*,#39794,.T.); +#41665 = ORIENTED_EDGE('',*,*,#41445,.T.); +#41666 = ORIENTED_EDGE('',*,*,#39903,.F.); +#41667 = ORIENTED_EDGE('',*,*,#41668,.F.); +#41668 = EDGE_CURVE('',#39787,#39896,#41669,.T.); +#41669 = LINE('',#41670,#41671); +#41670 = CARTESIAN_POINT('',(-2.545442325904,-2.11,0.7770944533)); +#41671 = VECTOR('',#41672,1.); +#41672 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41673 = CYLINDRICAL_SURFACE('',#41674,0.3); +#41674 = AXIS2_PLACEMENT_3D('',#41675,#41676,#41677); +#41675 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#41676 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41677 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41678 = ADVANCED_FACE('',(#41679),#41690,.F.); +#41679 = FACE_BOUND('',#41680,.F.); +#41680 = EDGE_LOOP('',(#41681,#41687,#41688,#41689)); +#41681 = ORIENTED_EDGE('',*,*,#41682,.T.); +#41682 = EDGE_CURVE('',#39778,#39887,#41683,.T.); +#41683 = LINE('',#41684,#41685); +#41684 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#41685 = VECTOR('',#41686,1.); +#41686 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41687 = ORIENTED_EDGE('',*,*,#39895,.T.); +#41688 = ORIENTED_EDGE('',*,*,#41668,.F.); +#41689 = ORIENTED_EDGE('',*,*,#39786,.F.); +#41690 = PLANE('',#41691); +#41691 = AXIS2_PLACEMENT_3D('',#41692,#41693,#41694); +#41692 = CARTESIAN_POINT('',(-2.6264581915,-2.11,0.282635182233)); +#41693 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#41694 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#41695 = ADVANCED_FACE('',(#41696),#41707,.F.); +#41696 = FACE_BOUND('',#41697,.F.); +#41697 = EDGE_LOOP('',(#41698,#41704,#41705,#41706)); +#41698 = ORIENTED_EDGE('',*,*,#41699,.T.); +#41699 = EDGE_CURVE('',#39770,#39879,#41700,.T.); +#41700 = LINE('',#41701,#41702); +#41701 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.2)); +#41702 = VECTOR('',#41703,1.); +#41703 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41704 = ORIENTED_EDGE('',*,*,#39886,.T.); +#41705 = ORIENTED_EDGE('',*,*,#41682,.F.); +#41706 = ORIENTED_EDGE('',*,*,#39777,.F.); +#41707 = CYLINDRICAL_SURFACE('',#41708,0.1); +#41708 = AXIS2_PLACEMENT_3D('',#41709,#41710,#41711); +#41709 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#41710 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41711 = DIRECTION('',(-0.,0.,-1.)); +#41712 = ADVANCED_FACE('',(#41713),#41724,.F.); +#41713 = FACE_BOUND('',#41714,.F.); +#41714 = EDGE_LOOP('',(#41715,#41721,#41722,#41723)); +#41715 = ORIENTED_EDGE('',*,*,#41716,.T.); +#41716 = EDGE_CURVE('',#39762,#39871,#41717,.T.); +#41717 = LINE('',#41718,#41719); +#41718 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#41719 = VECTOR('',#41720,1.); +#41720 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41721 = ORIENTED_EDGE('',*,*,#39878,.T.); +#41722 = ORIENTED_EDGE('',*,*,#41699,.F.); +#41723 = ORIENTED_EDGE('',*,*,#39769,.F.); +#41724 = PLANE('',#41725); +#41725 = AXIS2_PLACEMENT_3D('',#41726,#41727,#41728); +#41726 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#41727 = DIRECTION('',(0.,0.,-1.)); +#41728 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41729 = ADVANCED_FACE('',(#41730),#41741,.F.); +#41730 = FACE_BOUND('',#41731,.F.); +#41731 = EDGE_LOOP('',(#41732,#41738,#41739,#41740)); +#41732 = ORIENTED_EDGE('',*,*,#41733,.T.); +#41733 = EDGE_CURVE('',#39754,#39863,#41734,.T.); +#41734 = LINE('',#41735,#41736); +#41735 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#41736 = VECTOR('',#41737,1.); +#41737 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41738 = ORIENTED_EDGE('',*,*,#39870,.T.); +#41739 = ORIENTED_EDGE('',*,*,#41716,.F.); +#41740 = ORIENTED_EDGE('',*,*,#39761,.F.); +#41741 = PLANE('',#41742); +#41742 = AXIS2_PLACEMENT_3D('',#41743,#41744,#41745); +#41743 = CARTESIAN_POINT('',(-3.,-2.11,-1.665334536938E-16)); +#41744 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41745 = DIRECTION('',(0.,0.,1.)); +#41746 = ADVANCED_FACE('',(#41747),#41758,.F.); +#41747 = FACE_BOUND('',#41748,.F.); +#41748 = EDGE_LOOP('',(#41749,#41755,#41756,#41757)); +#41749 = ORIENTED_EDGE('',*,*,#41750,.T.); +#41750 = EDGE_CURVE('',#39745,#39854,#41751,.T.); +#41751 = LINE('',#41752,#41753); +#41752 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#41753 = VECTOR('',#41754,1.); +#41754 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41755 = ORIENTED_EDGE('',*,*,#39862,.T.); +#41756 = ORIENTED_EDGE('',*,*,#41733,.F.); +#41757 = ORIENTED_EDGE('',*,*,#39753,.F.); +#41758 = PLANE('',#41759); +#41759 = AXIS2_PLACEMENT_3D('',#41760,#41761,#41762); +#41760 = CARTESIAN_POINT('',(-2.724938966801,-2.11,-1.665334536938E-16) + ); +#41761 = DIRECTION('',(0.,0.,1.)); +#41762 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#41763 = ADVANCED_FACE('',(#41764),#41775,.T.); +#41764 = FACE_BOUND('',#41765,.T.); +#41765 = EDGE_LOOP('',(#41766,#41767,#41768,#41769)); +#41766 = ORIENTED_EDGE('',*,*,#39744,.T.); +#41767 = ORIENTED_EDGE('',*,*,#41750,.T.); +#41768 = ORIENTED_EDGE('',*,*,#39853,.F.); +#41769 = ORIENTED_EDGE('',*,*,#41770,.F.); +#41770 = EDGE_CURVE('',#39737,#39846,#41771,.T.); +#41771 = LINE('',#41772,#41773); +#41772 = CARTESIAN_POINT('',(-2.429496640897,-2.11,0.2479055467)); +#41773 = VECTOR('',#41774,1.); +#41774 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41775 = CYLINDRICAL_SURFACE('',#41776,0.3); +#41776 = AXIS2_PLACEMENT_3D('',#41777,#41778,#41779); +#41777 = CARTESIAN_POINT('',(-2.724938966801,-2.11,0.3)); +#41778 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41779 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#41780 = ADVANCED_FACE('',(#41781),#41787,.F.); +#41781 = FACE_BOUND('',#41782,.F.); +#41782 = EDGE_LOOP('',(#41783,#41784,#41785,#41786)); +#41783 = ORIENTED_EDGE('',*,*,#39827,.T.); +#41784 = ORIENTED_EDGE('',*,*,#39845,.T.); +#41785 = ORIENTED_EDGE('',*,*,#41770,.F.); +#41786 = ORIENTED_EDGE('',*,*,#39736,.F.); +#41787 = PLANE('',#41788); +#41788 = AXIS2_PLACEMENT_3D('',#41789,#41790,#41791); +#41789 = CARTESIAN_POINT('',(-2.348480775301,-2.11,0.742364817767)); +#41790 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#41791 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#41792 = ADVANCED_FACE('',(#41793),#41804,.T.); +#41793 = FACE_BOUND('',#41794,.T.); +#41794 = EDGE_LOOP('',(#41795,#41796,#41797,#41798)); +#41795 = ORIENTED_EDGE('',*,*,#40017,.T.); +#41796 = ORIENTED_EDGE('',*,*,#41464,.T.); +#41797 = ORIENTED_EDGE('',*,*,#40126,.F.); +#41798 = ORIENTED_EDGE('',*,*,#41799,.F.); +#41799 = EDGE_CURVE('',#40010,#40119,#41800,.T.); +#41800 = LINE('',#41801,#41802); +#41801 = CARTESIAN_POINT('',(-2.545442325904,-0.84,0.7770944533)); +#41802 = VECTOR('',#41803,1.); +#41803 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41804 = CYLINDRICAL_SURFACE('',#41805,0.3); +#41805 = AXIS2_PLACEMENT_3D('',#41806,#41807,#41808); +#41806 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#41807 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41808 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41809 = ADVANCED_FACE('',(#41810),#41821,.F.); +#41810 = FACE_BOUND('',#41811,.F.); +#41811 = EDGE_LOOP('',(#41812,#41818,#41819,#41820)); +#41812 = ORIENTED_EDGE('',*,*,#41813,.T.); +#41813 = EDGE_CURVE('',#40001,#40110,#41814,.T.); +#41814 = LINE('',#41815,#41816); +#41815 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#41816 = VECTOR('',#41817,1.); +#41817 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41818 = ORIENTED_EDGE('',*,*,#40118,.T.); +#41819 = ORIENTED_EDGE('',*,*,#41799,.F.); +#41820 = ORIENTED_EDGE('',*,*,#40009,.F.); +#41821 = PLANE('',#41822); +#41822 = AXIS2_PLACEMENT_3D('',#41823,#41824,#41825); +#41823 = CARTESIAN_POINT('',(-2.6264581915,-0.84,0.282635182233)); +#41824 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#41825 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#41826 = ADVANCED_FACE('',(#41827),#41838,.F.); +#41827 = FACE_BOUND('',#41828,.F.); +#41828 = EDGE_LOOP('',(#41829,#41835,#41836,#41837)); +#41829 = ORIENTED_EDGE('',*,*,#41830,.T.); +#41830 = EDGE_CURVE('',#39993,#40102,#41831,.T.); +#41831 = LINE('',#41832,#41833); +#41832 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.2)); +#41833 = VECTOR('',#41834,1.); +#41834 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41835 = ORIENTED_EDGE('',*,*,#40109,.T.); +#41836 = ORIENTED_EDGE('',*,*,#41813,.F.); +#41837 = ORIENTED_EDGE('',*,*,#40000,.F.); +#41838 = CYLINDRICAL_SURFACE('',#41839,0.1); +#41839 = AXIS2_PLACEMENT_3D('',#41840,#41841,#41842); +#41840 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#41841 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41842 = DIRECTION('',(-0.,0.,-1.)); +#41843 = ADVANCED_FACE('',(#41844),#41855,.F.); +#41844 = FACE_BOUND('',#41845,.F.); +#41845 = EDGE_LOOP('',(#41846,#41852,#41853,#41854)); +#41846 = ORIENTED_EDGE('',*,*,#41847,.T.); +#41847 = EDGE_CURVE('',#39985,#40094,#41848,.T.); +#41848 = LINE('',#41849,#41850); +#41849 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#41850 = VECTOR('',#41851,1.); +#41851 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41852 = ORIENTED_EDGE('',*,*,#40101,.T.); +#41853 = ORIENTED_EDGE('',*,*,#41830,.F.); +#41854 = ORIENTED_EDGE('',*,*,#39992,.F.); +#41855 = PLANE('',#41856); +#41856 = AXIS2_PLACEMENT_3D('',#41857,#41858,#41859); +#41857 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#41858 = DIRECTION('',(0.,0.,-1.)); +#41859 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41860 = ADVANCED_FACE('',(#41861),#41872,.F.); +#41861 = FACE_BOUND('',#41862,.F.); +#41862 = EDGE_LOOP('',(#41863,#41869,#41870,#41871)); +#41863 = ORIENTED_EDGE('',*,*,#41864,.T.); +#41864 = EDGE_CURVE('',#39977,#40086,#41865,.T.); +#41865 = LINE('',#41866,#41867); +#41866 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#41867 = VECTOR('',#41868,1.); +#41868 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41869 = ORIENTED_EDGE('',*,*,#40093,.T.); +#41870 = ORIENTED_EDGE('',*,*,#41847,.F.); +#41871 = ORIENTED_EDGE('',*,*,#39984,.F.); +#41872 = PLANE('',#41873); +#41873 = AXIS2_PLACEMENT_3D('',#41874,#41875,#41876); +#41874 = CARTESIAN_POINT('',(-3.,-0.84,-1.665334536938E-16)); +#41875 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41876 = DIRECTION('',(0.,0.,1.)); +#41877 = ADVANCED_FACE('',(#41878),#41889,.F.); +#41878 = FACE_BOUND('',#41879,.F.); +#41879 = EDGE_LOOP('',(#41880,#41886,#41887,#41888)); +#41880 = ORIENTED_EDGE('',*,*,#41881,.T.); +#41881 = EDGE_CURVE('',#39968,#40077,#41882,.T.); +#41882 = LINE('',#41883,#41884); +#41883 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#41884 = VECTOR('',#41885,1.); +#41885 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41886 = ORIENTED_EDGE('',*,*,#40085,.T.); +#41887 = ORIENTED_EDGE('',*,*,#41864,.F.); +#41888 = ORIENTED_EDGE('',*,*,#39976,.F.); +#41889 = PLANE('',#41890); +#41890 = AXIS2_PLACEMENT_3D('',#41891,#41892,#41893); +#41891 = CARTESIAN_POINT('',(-2.724938966801,-0.84,-1.665334536938E-16) + ); +#41892 = DIRECTION('',(0.,0.,1.)); +#41893 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#41894 = ADVANCED_FACE('',(#41895),#41906,.T.); +#41895 = FACE_BOUND('',#41896,.T.); +#41896 = EDGE_LOOP('',(#41897,#41898,#41899,#41900)); +#41897 = ORIENTED_EDGE('',*,*,#39967,.T.); +#41898 = ORIENTED_EDGE('',*,*,#41881,.T.); +#41899 = ORIENTED_EDGE('',*,*,#40076,.F.); +#41900 = ORIENTED_EDGE('',*,*,#41901,.F.); +#41901 = EDGE_CURVE('',#39960,#40069,#41902,.T.); +#41902 = LINE('',#41903,#41904); +#41903 = CARTESIAN_POINT('',(-2.429496640897,-0.84,0.2479055467)); +#41904 = VECTOR('',#41905,1.); +#41905 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41906 = CYLINDRICAL_SURFACE('',#41907,0.3); +#41907 = AXIS2_PLACEMENT_3D('',#41908,#41909,#41910); +#41908 = CARTESIAN_POINT('',(-2.724938966801,-0.84,0.3)); +#41909 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41910 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#41911 = ADVANCED_FACE('',(#41912),#41918,.F.); +#41912 = FACE_BOUND('',#41913,.F.); +#41913 = EDGE_LOOP('',(#41914,#41915,#41916,#41917)); +#41914 = ORIENTED_EDGE('',*,*,#40050,.T.); +#41915 = ORIENTED_EDGE('',*,*,#40068,.T.); +#41916 = ORIENTED_EDGE('',*,*,#41901,.F.); +#41917 = ORIENTED_EDGE('',*,*,#39959,.F.); +#41918 = PLANE('',#41919); +#41919 = AXIS2_PLACEMENT_3D('',#41920,#41921,#41922); +#41920 = CARTESIAN_POINT('',(-2.348480775301,-0.84,0.742364817767)); +#41921 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#41922 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#41923 = ADVANCED_FACE('',(#41924),#41935,.T.); +#41924 = FACE_BOUND('',#41925,.T.); +#41925 = EDGE_LOOP('',(#41926,#41927,#41928,#41929)); +#41926 = ORIENTED_EDGE('',*,*,#40240,.T.); +#41927 = ORIENTED_EDGE('',*,*,#41483,.T.); +#41928 = ORIENTED_EDGE('',*,*,#40349,.F.); +#41929 = ORIENTED_EDGE('',*,*,#41930,.F.); +#41930 = EDGE_CURVE('',#40233,#40342,#41931,.T.); +#41931 = LINE('',#41932,#41933); +#41932 = CARTESIAN_POINT('',(-2.545442325904,0.43,0.7770944533)); +#41933 = VECTOR('',#41934,1.); +#41934 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41935 = CYLINDRICAL_SURFACE('',#41936,0.3); +#41936 = AXIS2_PLACEMENT_3D('',#41937,#41938,#41939); +#41937 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#41938 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41939 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#41940 = ADVANCED_FACE('',(#41941),#41952,.F.); +#41941 = FACE_BOUND('',#41942,.F.); +#41942 = EDGE_LOOP('',(#41943,#41949,#41950,#41951)); +#41943 = ORIENTED_EDGE('',*,*,#41944,.T.); +#41944 = EDGE_CURVE('',#40224,#40333,#41945,.T.); +#41945 = LINE('',#41946,#41947); +#41946 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#41947 = VECTOR('',#41948,1.); +#41948 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41949 = ORIENTED_EDGE('',*,*,#40341,.T.); +#41950 = ORIENTED_EDGE('',*,*,#41930,.F.); +#41951 = ORIENTED_EDGE('',*,*,#40232,.F.); +#41952 = PLANE('',#41953); +#41953 = AXIS2_PLACEMENT_3D('',#41954,#41955,#41956); +#41954 = CARTESIAN_POINT('',(-2.6264581915,0.43,0.282635182233)); +#41955 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#41956 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#41957 = ADVANCED_FACE('',(#41958),#41969,.F.); +#41958 = FACE_BOUND('',#41959,.F.); +#41959 = EDGE_LOOP('',(#41960,#41966,#41967,#41968)); +#41960 = ORIENTED_EDGE('',*,*,#41961,.T.); +#41961 = EDGE_CURVE('',#40216,#40325,#41962,.T.); +#41962 = LINE('',#41963,#41964); +#41963 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.2)); +#41964 = VECTOR('',#41965,1.); +#41965 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41966 = ORIENTED_EDGE('',*,*,#40332,.T.); +#41967 = ORIENTED_EDGE('',*,*,#41944,.F.); +#41968 = ORIENTED_EDGE('',*,*,#40223,.F.); +#41969 = CYLINDRICAL_SURFACE('',#41970,0.1); +#41970 = AXIS2_PLACEMENT_3D('',#41971,#41972,#41973); +#41971 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#41972 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#41973 = DIRECTION('',(-0.,0.,-1.)); +#41974 = ADVANCED_FACE('',(#41975),#41986,.F.); +#41975 = FACE_BOUND('',#41976,.F.); +#41976 = EDGE_LOOP('',(#41977,#41983,#41984,#41985)); +#41977 = ORIENTED_EDGE('',*,*,#41978,.T.); +#41978 = EDGE_CURVE('',#40208,#40317,#41979,.T.); +#41979 = LINE('',#41980,#41981); +#41980 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#41981 = VECTOR('',#41982,1.); +#41982 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#41983 = ORIENTED_EDGE('',*,*,#40324,.T.); +#41984 = ORIENTED_EDGE('',*,*,#41961,.F.); +#41985 = ORIENTED_EDGE('',*,*,#40215,.F.); +#41986 = PLANE('',#41987); +#41987 = AXIS2_PLACEMENT_3D('',#41988,#41989,#41990); +#41988 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#41989 = DIRECTION('',(0.,0.,-1.)); +#41990 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#41991 = ADVANCED_FACE('',(#41992),#42003,.F.); +#41992 = FACE_BOUND('',#41993,.F.); +#41993 = EDGE_LOOP('',(#41994,#42000,#42001,#42002)); +#41994 = ORIENTED_EDGE('',*,*,#41995,.T.); +#41995 = EDGE_CURVE('',#40200,#40309,#41996,.T.); +#41996 = LINE('',#41997,#41998); +#41997 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#41998 = VECTOR('',#41999,1.); +#41999 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42000 = ORIENTED_EDGE('',*,*,#40316,.T.); +#42001 = ORIENTED_EDGE('',*,*,#41978,.F.); +#42002 = ORIENTED_EDGE('',*,*,#40207,.F.); +#42003 = PLANE('',#42004); +#42004 = AXIS2_PLACEMENT_3D('',#42005,#42006,#42007); +#42005 = CARTESIAN_POINT('',(-3.,0.43,-1.665334536938E-16)); +#42006 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#42007 = DIRECTION('',(0.,0.,1.)); +#42008 = ADVANCED_FACE('',(#42009),#42020,.F.); +#42009 = FACE_BOUND('',#42010,.F.); +#42010 = EDGE_LOOP('',(#42011,#42017,#42018,#42019)); +#42011 = ORIENTED_EDGE('',*,*,#42012,.T.); +#42012 = EDGE_CURVE('',#40191,#40300,#42013,.T.); +#42013 = LINE('',#42014,#42015); +#42014 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#42015 = VECTOR('',#42016,1.); +#42016 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42017 = ORIENTED_EDGE('',*,*,#40308,.T.); +#42018 = ORIENTED_EDGE('',*,*,#41995,.F.); +#42019 = ORIENTED_EDGE('',*,*,#40199,.F.); +#42020 = PLANE('',#42021); +#42021 = AXIS2_PLACEMENT_3D('',#42022,#42023,#42024); +#42022 = CARTESIAN_POINT('',(-2.724938966801,0.43,-1.665334536938E-16)); +#42023 = DIRECTION('',(0.,0.,1.)); +#42024 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#42025 = ADVANCED_FACE('',(#42026),#42037,.T.); +#42026 = FACE_BOUND('',#42027,.T.); +#42027 = EDGE_LOOP('',(#42028,#42029,#42030,#42031)); +#42028 = ORIENTED_EDGE('',*,*,#40190,.T.); +#42029 = ORIENTED_EDGE('',*,*,#42012,.T.); +#42030 = ORIENTED_EDGE('',*,*,#40299,.F.); +#42031 = ORIENTED_EDGE('',*,*,#42032,.F.); +#42032 = EDGE_CURVE('',#40183,#40292,#42033,.T.); +#42033 = LINE('',#42034,#42035); +#42034 = CARTESIAN_POINT('',(-2.429496640897,0.43,0.2479055467)); +#42035 = VECTOR('',#42036,1.); +#42036 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42037 = CYLINDRICAL_SURFACE('',#42038,0.3); +#42038 = AXIS2_PLACEMENT_3D('',#42039,#42040,#42041); +#42039 = CARTESIAN_POINT('',(-2.724938966801,0.43,0.3)); +#42040 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#42041 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#42042 = ADVANCED_FACE('',(#42043),#42049,.F.); +#42043 = FACE_BOUND('',#42044,.F.); +#42044 = EDGE_LOOP('',(#42045,#42046,#42047,#42048)); +#42045 = ORIENTED_EDGE('',*,*,#40273,.T.); +#42046 = ORIENTED_EDGE('',*,*,#40291,.T.); +#42047 = ORIENTED_EDGE('',*,*,#42032,.F.); +#42048 = ORIENTED_EDGE('',*,*,#40182,.F.); +#42049 = PLANE('',#42050); +#42050 = AXIS2_PLACEMENT_3D('',#42051,#42052,#42053); +#42051 = CARTESIAN_POINT('',(-2.348480775301,0.43,0.742364817767)); +#42052 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#42053 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#42054 = ADVANCED_FACE('',(#42055),#42066,.F.); +#42055 = FACE_BOUND('',#42056,.F.); +#42056 = EDGE_LOOP('',(#42057,#42063,#42064,#42065)); +#42057 = ORIENTED_EDGE('',*,*,#42058,.T.); +#42058 = EDGE_CURVE('',#40442,#40544,#42059,.T.); +#42059 = LINE('',#42060,#42061); +#42060 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#42061 = VECTOR('',#42062,1.); +#42062 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42063 = ORIENTED_EDGE('',*,*,#40552,.T.); +#42064 = ORIENTED_EDGE('',*,*,#41430,.F.); +#42065 = ORIENTED_EDGE('',*,*,#40450,.F.); +#42066 = PLANE('',#42067); +#42067 = AXIS2_PLACEMENT_3D('',#42068,#42069,#42070); +#42068 = CARTESIAN_POINT('',(-2.6264581915,1.7,0.282635182233)); +#42069 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#42070 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#42071 = ADVANCED_FACE('',(#42072),#42083,.F.); +#42072 = FACE_BOUND('',#42073,.F.); +#42073 = EDGE_LOOP('',(#42074,#42080,#42081,#42082)); +#42074 = ORIENTED_EDGE('',*,*,#42075,.T.); +#42075 = EDGE_CURVE('',#40434,#40536,#42076,.T.); +#42076 = LINE('',#42077,#42078); +#42077 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.2)); +#42078 = VECTOR('',#42079,1.); +#42079 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42080 = ORIENTED_EDGE('',*,*,#40543,.T.); +#42081 = ORIENTED_EDGE('',*,*,#42058,.F.); +#42082 = ORIENTED_EDGE('',*,*,#40441,.F.); +#42083 = CYLINDRICAL_SURFACE('',#42084,0.1); +#42084 = AXIS2_PLACEMENT_3D('',#42085,#42086,#42087); +#42085 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#42086 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#42087 = DIRECTION('',(-0.,0.,-1.)); +#42088 = ADVANCED_FACE('',(#42089),#42100,.F.); +#42089 = FACE_BOUND('',#42090,.F.); +#42090 = EDGE_LOOP('',(#42091,#42097,#42098,#42099)); +#42091 = ORIENTED_EDGE('',*,*,#42092,.T.); +#42092 = EDGE_CURVE('',#40426,#40528,#42093,.T.); +#42093 = LINE('',#42094,#42095); +#42094 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#42095 = VECTOR('',#42096,1.); +#42096 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42097 = ORIENTED_EDGE('',*,*,#40535,.T.); +#42098 = ORIENTED_EDGE('',*,*,#42075,.F.); +#42099 = ORIENTED_EDGE('',*,*,#40433,.F.); +#42100 = PLANE('',#42101); +#42101 = AXIS2_PLACEMENT_3D('',#42102,#42103,#42104); +#42102 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#42103 = DIRECTION('',(0.,0.,-1.)); +#42104 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#42105 = ADVANCED_FACE('',(#42106),#42117,.F.); +#42106 = FACE_BOUND('',#42107,.F.); +#42107 = EDGE_LOOP('',(#42108,#42114,#42115,#42116)); +#42108 = ORIENTED_EDGE('',*,*,#42109,.T.); +#42109 = EDGE_CURVE('',#40418,#40520,#42110,.T.); +#42110 = LINE('',#42111,#42112); +#42111 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#42112 = VECTOR('',#42113,1.); +#42113 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42114 = ORIENTED_EDGE('',*,*,#40527,.T.); +#42115 = ORIENTED_EDGE('',*,*,#42092,.F.); +#42116 = ORIENTED_EDGE('',*,*,#40425,.F.); +#42117 = PLANE('',#42118); +#42118 = AXIS2_PLACEMENT_3D('',#42119,#42120,#42121); +#42119 = CARTESIAN_POINT('',(-3.,1.7,-1.665334536938E-16)); +#42120 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#42121 = DIRECTION('',(0.,0.,1.)); +#42122 = ADVANCED_FACE('',(#42123),#42134,.F.); +#42123 = FACE_BOUND('',#42124,.F.); +#42124 = EDGE_LOOP('',(#42125,#42131,#42132,#42133)); +#42125 = ORIENTED_EDGE('',*,*,#42126,.T.); +#42126 = EDGE_CURVE('',#40409,#40511,#42127,.T.); +#42127 = LINE('',#42128,#42129); +#42128 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#42129 = VECTOR('',#42130,1.); +#42130 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42131 = ORIENTED_EDGE('',*,*,#40519,.T.); +#42132 = ORIENTED_EDGE('',*,*,#42109,.F.); +#42133 = ORIENTED_EDGE('',*,*,#40417,.F.); +#42134 = PLANE('',#42135); +#42135 = AXIS2_PLACEMENT_3D('',#42136,#42137,#42138); +#42136 = CARTESIAN_POINT('',(-2.724938966801,1.7,-1.665334536938E-16)); +#42137 = DIRECTION('',(0.,0.,1.)); +#42138 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#42139 = ADVANCED_FACE('',(#42140),#42151,.T.); +#42140 = FACE_BOUND('',#42141,.T.); +#42141 = EDGE_LOOP('',(#42142,#42143,#42144,#42145)); +#42142 = ORIENTED_EDGE('',*,*,#40408,.T.); +#42143 = ORIENTED_EDGE('',*,*,#42126,.T.); +#42144 = ORIENTED_EDGE('',*,*,#40510,.F.); +#42145 = ORIENTED_EDGE('',*,*,#42146,.F.); +#42146 = EDGE_CURVE('',#40401,#40503,#42147,.T.); +#42147 = LINE('',#42148,#42149); +#42148 = CARTESIAN_POINT('',(-2.429496640897,1.7,0.2479055467)); +#42149 = VECTOR('',#42150,1.); +#42150 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#42151 = CYLINDRICAL_SURFACE('',#42152,0.3); +#42152 = AXIS2_PLACEMENT_3D('',#42153,#42154,#42155); +#42153 = CARTESIAN_POINT('',(-2.724938966801,1.7,0.3)); +#42154 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#42155 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#42156 = ADVANCED_FACE('',(#42157),#42163,.F.); +#42157 = FACE_BOUND('',#42158,.F.); +#42158 = EDGE_LOOP('',(#42159,#42160,#42161,#42162)); +#42159 = ORIENTED_EDGE('',*,*,#40484,.T.); +#42160 = ORIENTED_EDGE('',*,*,#40502,.T.); +#42161 = ORIENTED_EDGE('',*,*,#42146,.F.); +#42162 = ORIENTED_EDGE('',*,*,#40400,.F.); +#42163 = PLANE('',#42164); +#42164 = AXIS2_PLACEMENT_3D('',#42165,#42166,#42167); +#42165 = CARTESIAN_POINT('',(-2.348480775301,1.7,0.742364817767)); +#42166 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#42167 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#42168 = ADVANCED_FACE('',(#42169),#42180,.F.); +#42169 = FACE_BOUND('',#42170,.F.); +#42170 = EDGE_LOOP('',(#42171,#42177,#42178,#42179)); +#42171 = ORIENTED_EDGE('',*,*,#42172,.T.); +#42172 = EDGE_CURVE('',#40629,#40731,#42173,.T.); +#42173 = LINE('',#42174,#42175); +#42174 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#42175 = VECTOR('',#42176,1.); +#42176 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42177 = ORIENTED_EDGE('',*,*,#40739,.T.); +#42178 = ORIENTED_EDGE('',*,*,#41639,.F.); +#42179 = ORIENTED_EDGE('',*,*,#40637,.F.); +#42180 = PLANE('',#42181); +#42181 = AXIS2_PLACEMENT_3D('',#42182,#42183,#42184); +#42182 = CARTESIAN_POINT('',(2.6264581915,2.11,0.282635182233)); +#42183 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42184 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42185 = ADVANCED_FACE('',(#42186),#42197,.F.); +#42186 = FACE_BOUND('',#42187,.F.); +#42187 = EDGE_LOOP('',(#42188,#42194,#42195,#42196)); +#42188 = ORIENTED_EDGE('',*,*,#42189,.T.); +#42189 = EDGE_CURVE('',#40621,#40723,#42190,.T.); +#42190 = LINE('',#42191,#42192); +#42191 = CARTESIAN_POINT('',(2.724938966801,2.11,0.2)); +#42192 = VECTOR('',#42193,1.); +#42193 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42194 = ORIENTED_EDGE('',*,*,#40730,.T.); +#42195 = ORIENTED_EDGE('',*,*,#42172,.F.); +#42196 = ORIENTED_EDGE('',*,*,#40628,.F.); +#42197 = CYLINDRICAL_SURFACE('',#42198,0.1); +#42198 = AXIS2_PLACEMENT_3D('',#42199,#42200,#42201); +#42199 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#42200 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42201 = DIRECTION('',(0.,0.,-1.)); +#42202 = ADVANCED_FACE('',(#42203),#42214,.F.); +#42203 = FACE_BOUND('',#42204,.F.); +#42204 = EDGE_LOOP('',(#42205,#42211,#42212,#42213)); +#42205 = ORIENTED_EDGE('',*,*,#42206,.T.); +#42206 = EDGE_CURVE('',#40613,#40715,#42207,.T.); +#42207 = LINE('',#42208,#42209); +#42208 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#42209 = VECTOR('',#42210,1.); +#42210 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42211 = ORIENTED_EDGE('',*,*,#40722,.T.); +#42212 = ORIENTED_EDGE('',*,*,#42189,.F.); +#42213 = ORIENTED_EDGE('',*,*,#40620,.F.); +#42214 = PLANE('',#42215); +#42215 = AXIS2_PLACEMENT_3D('',#42216,#42217,#42218); +#42216 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#42217 = DIRECTION('',(0.,0.,-1.)); +#42218 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42219 = ADVANCED_FACE('',(#42220),#42231,.F.); +#42220 = FACE_BOUND('',#42221,.F.); +#42221 = EDGE_LOOP('',(#42222,#42228,#42229,#42230)); +#42222 = ORIENTED_EDGE('',*,*,#42223,.T.); +#42223 = EDGE_CURVE('',#40605,#40707,#42224,.T.); +#42224 = LINE('',#42225,#42226); +#42225 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#42226 = VECTOR('',#42227,1.); +#42227 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42228 = ORIENTED_EDGE('',*,*,#40714,.T.); +#42229 = ORIENTED_EDGE('',*,*,#42206,.F.); +#42230 = ORIENTED_EDGE('',*,*,#40612,.F.); +#42231 = PLANE('',#42232); +#42232 = AXIS2_PLACEMENT_3D('',#42233,#42234,#42235); +#42233 = CARTESIAN_POINT('',(3.,2.11,-1.665334536938E-16)); +#42234 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42235 = DIRECTION('',(0.,0.,1.)); +#42236 = ADVANCED_FACE('',(#42237),#42248,.F.); +#42237 = FACE_BOUND('',#42238,.F.); +#42238 = EDGE_LOOP('',(#42239,#42245,#42246,#42247)); +#42239 = ORIENTED_EDGE('',*,*,#42240,.T.); +#42240 = EDGE_CURVE('',#40596,#40698,#42241,.T.); +#42241 = LINE('',#42242,#42243); +#42242 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#42243 = VECTOR('',#42244,1.); +#42244 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42245 = ORIENTED_EDGE('',*,*,#40706,.T.); +#42246 = ORIENTED_EDGE('',*,*,#42223,.F.); +#42247 = ORIENTED_EDGE('',*,*,#40604,.F.); +#42248 = PLANE('',#42249); +#42249 = AXIS2_PLACEMENT_3D('',#42250,#42251,#42252); +#42250 = CARTESIAN_POINT('',(2.724938966801,2.11,-1.665334536938E-16)); +#42251 = DIRECTION('',(0.,0.,1.)); +#42252 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42253 = ADVANCED_FACE('',(#42254),#42265,.T.); +#42254 = FACE_BOUND('',#42255,.T.); +#42255 = EDGE_LOOP('',(#42256,#42257,#42258,#42259)); +#42256 = ORIENTED_EDGE('',*,*,#40595,.T.); +#42257 = ORIENTED_EDGE('',*,*,#42240,.T.); +#42258 = ORIENTED_EDGE('',*,*,#40697,.F.); +#42259 = ORIENTED_EDGE('',*,*,#42260,.F.); +#42260 = EDGE_CURVE('',#40588,#40690,#42261,.T.); +#42261 = LINE('',#42262,#42263); +#42262 = CARTESIAN_POINT('',(2.429496640897,2.11,0.2479055467)); +#42263 = VECTOR('',#42264,1.); +#42264 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42265 = CYLINDRICAL_SURFACE('',#42266,0.3); +#42266 = AXIS2_PLACEMENT_3D('',#42267,#42268,#42269); +#42267 = CARTESIAN_POINT('',(2.724938966801,2.11,0.3)); +#42268 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42269 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42270 = ADVANCED_FACE('',(#42271),#42277,.F.); +#42271 = FACE_BOUND('',#42272,.F.); +#42272 = EDGE_LOOP('',(#42273,#42274,#42275,#42276)); +#42273 = ORIENTED_EDGE('',*,*,#40671,.T.); +#42274 = ORIENTED_EDGE('',*,*,#40689,.T.); +#42275 = ORIENTED_EDGE('',*,*,#42260,.F.); +#42276 = ORIENTED_EDGE('',*,*,#40587,.F.); +#42277 = PLANE('',#42278); +#42278 = AXIS2_PLACEMENT_3D('',#42279,#42280,#42281); +#42279 = CARTESIAN_POINT('',(2.348480775301,2.11,0.742364817767)); +#42280 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42281 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42282 = ADVANCED_FACE('',(#42283),#42294,.T.); +#42283 = FACE_BOUND('',#42284,.T.); +#42284 = EDGE_LOOP('',(#42285,#42286,#42287,#42288)); +#42285 = ORIENTED_EDGE('',*,*,#40849,.T.); +#42286 = ORIENTED_EDGE('',*,*,#41564,.T.); +#42287 = ORIENTED_EDGE('',*,*,#40958,.F.); +#42288 = ORIENTED_EDGE('',*,*,#42289,.F.); +#42289 = EDGE_CURVE('',#40842,#40951,#42290,.T.); +#42290 = LINE('',#42291,#42292); +#42291 = CARTESIAN_POINT('',(2.545442325904,0.84,0.7770944533)); +#42292 = VECTOR('',#42293,1.); +#42293 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42294 = CYLINDRICAL_SURFACE('',#42295,0.3); +#42295 = AXIS2_PLACEMENT_3D('',#42296,#42297,#42298); +#42296 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#42297 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42298 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#42299 = ADVANCED_FACE('',(#42300),#42311,.F.); +#42300 = FACE_BOUND('',#42301,.F.); +#42301 = EDGE_LOOP('',(#42302,#42308,#42309,#42310)); +#42302 = ORIENTED_EDGE('',*,*,#42303,.T.); +#42303 = EDGE_CURVE('',#40833,#40942,#42304,.T.); +#42304 = LINE('',#42305,#42306); +#42305 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#42306 = VECTOR('',#42307,1.); +#42307 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42308 = ORIENTED_EDGE('',*,*,#40950,.T.); +#42309 = ORIENTED_EDGE('',*,*,#42289,.F.); +#42310 = ORIENTED_EDGE('',*,*,#40841,.F.); +#42311 = PLANE('',#42312); +#42312 = AXIS2_PLACEMENT_3D('',#42313,#42314,#42315); +#42313 = CARTESIAN_POINT('',(2.6264581915,0.84,0.282635182233)); +#42314 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42315 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42316 = ADVANCED_FACE('',(#42317),#42328,.F.); +#42317 = FACE_BOUND('',#42318,.F.); +#42318 = EDGE_LOOP('',(#42319,#42325,#42326,#42327)); +#42319 = ORIENTED_EDGE('',*,*,#42320,.T.); +#42320 = EDGE_CURVE('',#40825,#40934,#42321,.T.); +#42321 = LINE('',#42322,#42323); +#42322 = CARTESIAN_POINT('',(2.724938966801,0.84,0.2)); +#42323 = VECTOR('',#42324,1.); +#42324 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42325 = ORIENTED_EDGE('',*,*,#40941,.T.); +#42326 = ORIENTED_EDGE('',*,*,#42303,.F.); +#42327 = ORIENTED_EDGE('',*,*,#40832,.F.); +#42328 = CYLINDRICAL_SURFACE('',#42329,0.1); +#42329 = AXIS2_PLACEMENT_3D('',#42330,#42331,#42332); +#42330 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#42331 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42332 = DIRECTION('',(0.,0.,-1.)); +#42333 = ADVANCED_FACE('',(#42334),#42345,.F.); +#42334 = FACE_BOUND('',#42335,.F.); +#42335 = EDGE_LOOP('',(#42336,#42342,#42343,#42344)); +#42336 = ORIENTED_EDGE('',*,*,#42337,.T.); +#42337 = EDGE_CURVE('',#40817,#40926,#42338,.T.); +#42338 = LINE('',#42339,#42340); +#42339 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#42340 = VECTOR('',#42341,1.); +#42341 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42342 = ORIENTED_EDGE('',*,*,#40933,.T.); +#42343 = ORIENTED_EDGE('',*,*,#42320,.F.); +#42344 = ORIENTED_EDGE('',*,*,#40824,.F.); +#42345 = PLANE('',#42346); +#42346 = AXIS2_PLACEMENT_3D('',#42347,#42348,#42349); +#42347 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#42348 = DIRECTION('',(0.,0.,-1.)); +#42349 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42350 = ADVANCED_FACE('',(#42351),#42362,.F.); +#42351 = FACE_BOUND('',#42352,.F.); +#42352 = EDGE_LOOP('',(#42353,#42359,#42360,#42361)); +#42353 = ORIENTED_EDGE('',*,*,#42354,.T.); +#42354 = EDGE_CURVE('',#40809,#40918,#42355,.T.); +#42355 = LINE('',#42356,#42357); +#42356 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#42357 = VECTOR('',#42358,1.); +#42358 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42359 = ORIENTED_EDGE('',*,*,#40925,.T.); +#42360 = ORIENTED_EDGE('',*,*,#42337,.F.); +#42361 = ORIENTED_EDGE('',*,*,#40816,.F.); +#42362 = PLANE('',#42363); +#42363 = AXIS2_PLACEMENT_3D('',#42364,#42365,#42366); +#42364 = CARTESIAN_POINT('',(3.,0.84,-1.665334536938E-16)); +#42365 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42366 = DIRECTION('',(0.,0.,1.)); +#42367 = ADVANCED_FACE('',(#42368),#42379,.F.); +#42368 = FACE_BOUND('',#42369,.F.); +#42369 = EDGE_LOOP('',(#42370,#42376,#42377,#42378)); +#42370 = ORIENTED_EDGE('',*,*,#42371,.T.); +#42371 = EDGE_CURVE('',#40800,#40909,#42372,.T.); +#42372 = LINE('',#42373,#42374); +#42373 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#42374 = VECTOR('',#42375,1.); +#42375 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42376 = ORIENTED_EDGE('',*,*,#40917,.T.); +#42377 = ORIENTED_EDGE('',*,*,#42354,.F.); +#42378 = ORIENTED_EDGE('',*,*,#40808,.F.); +#42379 = PLANE('',#42380); +#42380 = AXIS2_PLACEMENT_3D('',#42381,#42382,#42383); +#42381 = CARTESIAN_POINT('',(2.724938966801,0.84,-1.665334536938E-16)); +#42382 = DIRECTION('',(0.,0.,1.)); +#42383 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42384 = ADVANCED_FACE('',(#42385),#42396,.T.); +#42385 = FACE_BOUND('',#42386,.T.); +#42386 = EDGE_LOOP('',(#42387,#42388,#42389,#42390)); +#42387 = ORIENTED_EDGE('',*,*,#40799,.T.); +#42388 = ORIENTED_EDGE('',*,*,#42371,.T.); +#42389 = ORIENTED_EDGE('',*,*,#40908,.F.); +#42390 = ORIENTED_EDGE('',*,*,#42391,.F.); +#42391 = EDGE_CURVE('',#40792,#40901,#42392,.T.); +#42392 = LINE('',#42393,#42394); +#42393 = CARTESIAN_POINT('',(2.429496640897,0.84,0.2479055467)); +#42394 = VECTOR('',#42395,1.); +#42395 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42396 = CYLINDRICAL_SURFACE('',#42397,0.3); +#42397 = AXIS2_PLACEMENT_3D('',#42398,#42399,#42400); +#42398 = CARTESIAN_POINT('',(2.724938966801,0.84,0.3)); +#42399 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42400 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42401 = ADVANCED_FACE('',(#42402),#42408,.F.); +#42402 = FACE_BOUND('',#42403,.F.); +#42403 = EDGE_LOOP('',(#42404,#42405,#42406,#42407)); +#42404 = ORIENTED_EDGE('',*,*,#40882,.T.); +#42405 = ORIENTED_EDGE('',*,*,#40900,.T.); +#42406 = ORIENTED_EDGE('',*,*,#42391,.F.); +#42407 = ORIENTED_EDGE('',*,*,#40791,.F.); +#42408 = PLANE('',#42409); +#42409 = AXIS2_PLACEMENT_3D('',#42410,#42411,#42412); +#42410 = CARTESIAN_POINT('',(2.348480775301,0.84,0.742364817767)); +#42411 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42412 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42413 = ADVANCED_FACE('',(#42414),#42425,.T.); +#42414 = FACE_BOUND('',#42415,.T.); +#42415 = EDGE_LOOP('',(#42416,#42417,#42418,#42419)); +#42416 = ORIENTED_EDGE('',*,*,#41072,.T.); +#42417 = ORIENTED_EDGE('',*,*,#41583,.T.); +#42418 = ORIENTED_EDGE('',*,*,#41181,.F.); +#42419 = ORIENTED_EDGE('',*,*,#42420,.F.); +#42420 = EDGE_CURVE('',#41065,#41174,#42421,.T.); +#42421 = LINE('',#42422,#42423); +#42422 = CARTESIAN_POINT('',(2.545442325904,-0.43,0.7770944533)); +#42423 = VECTOR('',#42424,1.); +#42424 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42425 = CYLINDRICAL_SURFACE('',#42426,0.3); +#42426 = AXIS2_PLACEMENT_3D('',#42427,#42428,#42429); +#42427 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#42428 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42429 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#42430 = ADVANCED_FACE('',(#42431),#42442,.F.); +#42431 = FACE_BOUND('',#42432,.F.); +#42432 = EDGE_LOOP('',(#42433,#42439,#42440,#42441)); +#42433 = ORIENTED_EDGE('',*,*,#42434,.T.); +#42434 = EDGE_CURVE('',#41056,#41165,#42435,.T.); +#42435 = LINE('',#42436,#42437); +#42436 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#42437 = VECTOR('',#42438,1.); +#42438 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42439 = ORIENTED_EDGE('',*,*,#41173,.T.); +#42440 = ORIENTED_EDGE('',*,*,#42420,.F.); +#42441 = ORIENTED_EDGE('',*,*,#41064,.F.); +#42442 = PLANE('',#42443); +#42443 = AXIS2_PLACEMENT_3D('',#42444,#42445,#42446); +#42444 = CARTESIAN_POINT('',(2.6264581915,-0.43,0.282635182233)); +#42445 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42446 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42447 = ADVANCED_FACE('',(#42448),#42459,.F.); +#42448 = FACE_BOUND('',#42449,.F.); +#42449 = EDGE_LOOP('',(#42450,#42456,#42457,#42458)); +#42450 = ORIENTED_EDGE('',*,*,#42451,.T.); +#42451 = EDGE_CURVE('',#41048,#41157,#42452,.T.); +#42452 = LINE('',#42453,#42454); +#42453 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.2)); +#42454 = VECTOR('',#42455,1.); +#42455 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42456 = ORIENTED_EDGE('',*,*,#41164,.T.); +#42457 = ORIENTED_EDGE('',*,*,#42434,.F.); +#42458 = ORIENTED_EDGE('',*,*,#41055,.F.); +#42459 = CYLINDRICAL_SURFACE('',#42460,0.1); +#42460 = AXIS2_PLACEMENT_3D('',#42461,#42462,#42463); +#42461 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#42462 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42463 = DIRECTION('',(0.,0.,-1.)); +#42464 = ADVANCED_FACE('',(#42465),#42476,.F.); +#42465 = FACE_BOUND('',#42466,.F.); +#42466 = EDGE_LOOP('',(#42467,#42473,#42474,#42475)); +#42467 = ORIENTED_EDGE('',*,*,#42468,.T.); +#42468 = EDGE_CURVE('',#41040,#41149,#42469,.T.); +#42469 = LINE('',#42470,#42471); +#42470 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#42471 = VECTOR('',#42472,1.); +#42472 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42473 = ORIENTED_EDGE('',*,*,#41156,.T.); +#42474 = ORIENTED_EDGE('',*,*,#42451,.F.); +#42475 = ORIENTED_EDGE('',*,*,#41047,.F.); +#42476 = PLANE('',#42477); +#42477 = AXIS2_PLACEMENT_3D('',#42478,#42479,#42480); +#42478 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#42479 = DIRECTION('',(0.,0.,-1.)); +#42480 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42481 = ADVANCED_FACE('',(#42482),#42493,.F.); +#42482 = FACE_BOUND('',#42483,.F.); +#42483 = EDGE_LOOP('',(#42484,#42490,#42491,#42492)); +#42484 = ORIENTED_EDGE('',*,*,#42485,.T.); +#42485 = EDGE_CURVE('',#41032,#41141,#42486,.T.); +#42486 = LINE('',#42487,#42488); +#42487 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#42488 = VECTOR('',#42489,1.); +#42489 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42490 = ORIENTED_EDGE('',*,*,#41148,.T.); +#42491 = ORIENTED_EDGE('',*,*,#42468,.F.); +#42492 = ORIENTED_EDGE('',*,*,#41039,.F.); +#42493 = PLANE('',#42494); +#42494 = AXIS2_PLACEMENT_3D('',#42495,#42496,#42497); +#42495 = CARTESIAN_POINT('',(3.,-0.43,-1.665334536938E-16)); +#42496 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42497 = DIRECTION('',(0.,0.,1.)); +#42498 = ADVANCED_FACE('',(#42499),#42510,.F.); +#42499 = FACE_BOUND('',#42500,.F.); +#42500 = EDGE_LOOP('',(#42501,#42507,#42508,#42509)); +#42501 = ORIENTED_EDGE('',*,*,#42502,.T.); +#42502 = EDGE_CURVE('',#41023,#41132,#42503,.T.); +#42503 = LINE('',#42504,#42505); +#42504 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#42505 = VECTOR('',#42506,1.); +#42506 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42507 = ORIENTED_EDGE('',*,*,#41140,.T.); +#42508 = ORIENTED_EDGE('',*,*,#42485,.F.); +#42509 = ORIENTED_EDGE('',*,*,#41031,.F.); +#42510 = PLANE('',#42511); +#42511 = AXIS2_PLACEMENT_3D('',#42512,#42513,#42514); +#42512 = CARTESIAN_POINT('',(2.724938966801,-0.43,-1.665334536938E-16)); +#42513 = DIRECTION('',(0.,0.,1.)); +#42514 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42515 = ADVANCED_FACE('',(#42516),#42527,.T.); +#42516 = FACE_BOUND('',#42517,.T.); +#42517 = EDGE_LOOP('',(#42518,#42519,#42520,#42521)); +#42518 = ORIENTED_EDGE('',*,*,#41022,.T.); +#42519 = ORIENTED_EDGE('',*,*,#42502,.T.); +#42520 = ORIENTED_EDGE('',*,*,#41131,.F.); +#42521 = ORIENTED_EDGE('',*,*,#42522,.F.); +#42522 = EDGE_CURVE('',#41015,#41124,#42523,.T.); +#42523 = LINE('',#42524,#42525); +#42524 = CARTESIAN_POINT('',(2.429496640897,-0.43,0.2479055467)); +#42525 = VECTOR('',#42526,1.); +#42526 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42527 = CYLINDRICAL_SURFACE('',#42528,0.3); +#42528 = AXIS2_PLACEMENT_3D('',#42529,#42530,#42531); +#42529 = CARTESIAN_POINT('',(2.724938966801,-0.43,0.3)); +#42530 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42531 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42532 = ADVANCED_FACE('',(#42533),#42539,.F.); +#42533 = FACE_BOUND('',#42534,.F.); +#42534 = EDGE_LOOP('',(#42535,#42536,#42537,#42538)); +#42535 = ORIENTED_EDGE('',*,*,#41105,.T.); +#42536 = ORIENTED_EDGE('',*,*,#41123,.T.); +#42537 = ORIENTED_EDGE('',*,*,#42522,.F.); +#42538 = ORIENTED_EDGE('',*,*,#41014,.F.); +#42539 = PLANE('',#42540); +#42540 = AXIS2_PLACEMENT_3D('',#42541,#42542,#42543); +#42541 = CARTESIAN_POINT('',(2.348480775301,-0.43,0.742364817767)); +#42542 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42543 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42544 = ADVANCED_FACE('',(#42545),#42556,.T.); +#42545 = FACE_BOUND('',#42546,.T.); +#42546 = EDGE_LOOP('',(#42547,#42548,#42549,#42550)); +#42547 = ORIENTED_EDGE('',*,*,#41295,.T.); +#42548 = ORIENTED_EDGE('',*,*,#41602,.T.); +#42549 = ORIENTED_EDGE('',*,*,#41404,.F.); +#42550 = ORIENTED_EDGE('',*,*,#42551,.F.); +#42551 = EDGE_CURVE('',#41288,#41397,#42552,.T.); +#42552 = LINE('',#42553,#42554); +#42553 = CARTESIAN_POINT('',(2.545442325904,-1.7,0.7770944533)); +#42554 = VECTOR('',#42555,1.); +#42555 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42556 = CYLINDRICAL_SURFACE('',#42557,0.3); +#42557 = AXIS2_PLACEMENT_3D('',#42558,#42559,#42560); +#42558 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#42559 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42560 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#42561 = ADVANCED_FACE('',(#42562),#42573,.F.); +#42562 = FACE_BOUND('',#42563,.F.); +#42563 = EDGE_LOOP('',(#42564,#42570,#42571,#42572)); +#42564 = ORIENTED_EDGE('',*,*,#42565,.T.); +#42565 = EDGE_CURVE('',#41279,#41388,#42566,.T.); +#42566 = LINE('',#42567,#42568); +#42567 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#42568 = VECTOR('',#42569,1.); +#42569 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42570 = ORIENTED_EDGE('',*,*,#41396,.T.); +#42571 = ORIENTED_EDGE('',*,*,#42551,.F.); +#42572 = ORIENTED_EDGE('',*,*,#41287,.F.); +#42573 = PLANE('',#42574); +#42574 = AXIS2_PLACEMENT_3D('',#42575,#42576,#42577); +#42575 = CARTESIAN_POINT('',(2.6264581915,-1.7,0.282635182233)); +#42576 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#42577 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#42578 = ADVANCED_FACE('',(#42579),#42590,.F.); +#42579 = FACE_BOUND('',#42580,.F.); +#42580 = EDGE_LOOP('',(#42581,#42587,#42588,#42589)); +#42581 = ORIENTED_EDGE('',*,*,#42582,.T.); +#42582 = EDGE_CURVE('',#41271,#41380,#42583,.T.); +#42583 = LINE('',#42584,#42585); +#42584 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.2)); +#42585 = VECTOR('',#42586,1.); +#42586 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42587 = ORIENTED_EDGE('',*,*,#41387,.T.); +#42588 = ORIENTED_EDGE('',*,*,#42565,.F.); +#42589 = ORIENTED_EDGE('',*,*,#41278,.F.); +#42590 = CYLINDRICAL_SURFACE('',#42591,0.1); +#42591 = AXIS2_PLACEMENT_3D('',#42592,#42593,#42594); +#42592 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#42593 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42594 = DIRECTION('',(0.,0.,-1.)); +#42595 = ADVANCED_FACE('',(#42596),#42607,.F.); +#42596 = FACE_BOUND('',#42597,.F.); +#42597 = EDGE_LOOP('',(#42598,#42604,#42605,#42606)); +#42598 = ORIENTED_EDGE('',*,*,#42599,.T.); +#42599 = EDGE_CURVE('',#41263,#41372,#42600,.T.); +#42600 = LINE('',#42601,#42602); +#42601 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#42602 = VECTOR('',#42603,1.); +#42603 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42604 = ORIENTED_EDGE('',*,*,#41379,.T.); +#42605 = ORIENTED_EDGE('',*,*,#42582,.F.); +#42606 = ORIENTED_EDGE('',*,*,#41270,.F.); +#42607 = PLANE('',#42608); +#42608 = AXIS2_PLACEMENT_3D('',#42609,#42610,#42611); +#42609 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#42610 = DIRECTION('',(0.,0.,-1.)); +#42611 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#42612 = ADVANCED_FACE('',(#42613),#42624,.F.); +#42613 = FACE_BOUND('',#42614,.F.); +#42614 = EDGE_LOOP('',(#42615,#42621,#42622,#42623)); +#42615 = ORIENTED_EDGE('',*,*,#42616,.T.); +#42616 = EDGE_CURVE('',#41255,#41364,#42617,.T.); +#42617 = LINE('',#42618,#42619); +#42618 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#42619 = VECTOR('',#42620,1.); +#42620 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42621 = ORIENTED_EDGE('',*,*,#41371,.T.); +#42622 = ORIENTED_EDGE('',*,*,#42599,.F.); +#42623 = ORIENTED_EDGE('',*,*,#41262,.F.); +#42624 = PLANE('',#42625); +#42625 = AXIS2_PLACEMENT_3D('',#42626,#42627,#42628); +#42626 = CARTESIAN_POINT('',(3.,-1.7,-1.665334536938E-16)); +#42627 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#42628 = DIRECTION('',(0.,0.,1.)); +#42629 = ADVANCED_FACE('',(#42630),#42641,.F.); +#42630 = FACE_BOUND('',#42631,.F.); +#42631 = EDGE_LOOP('',(#42632,#42638,#42639,#42640)); +#42632 = ORIENTED_EDGE('',*,*,#42633,.T.); +#42633 = EDGE_CURVE('',#41246,#41355,#42634,.T.); +#42634 = LINE('',#42635,#42636); +#42635 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#42636 = VECTOR('',#42637,1.); +#42637 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42638 = ORIENTED_EDGE('',*,*,#41363,.T.); +#42639 = ORIENTED_EDGE('',*,*,#42616,.F.); +#42640 = ORIENTED_EDGE('',*,*,#41254,.F.); +#42641 = PLANE('',#42642); +#42642 = AXIS2_PLACEMENT_3D('',#42643,#42644,#42645); +#42643 = CARTESIAN_POINT('',(2.724938966801,-1.7,-1.665334536938E-16)); +#42644 = DIRECTION('',(0.,0.,1.)); +#42645 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#42646 = ADVANCED_FACE('',(#42647),#42658,.T.); +#42647 = FACE_BOUND('',#42648,.T.); +#42648 = EDGE_LOOP('',(#42649,#42650,#42651,#42652)); +#42649 = ORIENTED_EDGE('',*,*,#41245,.T.); +#42650 = ORIENTED_EDGE('',*,*,#42633,.T.); +#42651 = ORIENTED_EDGE('',*,*,#41354,.F.); +#42652 = ORIENTED_EDGE('',*,*,#42653,.F.); +#42653 = EDGE_CURVE('',#41238,#41347,#42654,.T.); +#42654 = LINE('',#42655,#42656); +#42655 = CARTESIAN_POINT('',(2.429496640897,-1.7,0.2479055467)); +#42656 = VECTOR('',#42657,1.); +#42657 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42658 = CYLINDRICAL_SURFACE('',#42659,0.3); +#42659 = AXIS2_PLACEMENT_3D('',#42660,#42661,#42662); +#42660 = CARTESIAN_POINT('',(2.724938966801,-1.7,0.3)); +#42661 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#42662 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#42663 = ADVANCED_FACE('',(#42664),#42670,.F.); +#42664 = FACE_BOUND('',#42665,.F.); +#42665 = EDGE_LOOP('',(#42666,#42667,#42668,#42669)); +#42666 = ORIENTED_EDGE('',*,*,#41328,.T.); +#42667 = ORIENTED_EDGE('',*,*,#41346,.T.); +#42668 = ORIENTED_EDGE('',*,*,#42653,.F.); +#42669 = ORIENTED_EDGE('',*,*,#41237,.F.); +#42670 = PLANE('',#42671); +#42671 = AXIS2_PLACEMENT_3D('',#42672,#42673,#42674); +#42672 = CARTESIAN_POINT('',(2.348480775301,-1.7,0.742364817767)); +#42673 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#42674 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#42675 = ADVANCED_FACE('',(#42676),#42677,.F.); +#42676 = FACE_BOUND('',#41528,.T.); +#42677 = PLANE('',#42678); +#42678 = AXIS2_PLACEMENT_3D('',#42679,#42680,#42681); +#42679 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.75)); +#42680 = DIRECTION('',(0.,0.,-1.)); +#42681 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#42682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#42686)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#42683,#42684,#42685)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#42683 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#42684 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#42685 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#42686 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#42683, + 'distance_accuracy_value','confusion accuracy'); +#42687 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#42688,#42690); +#42688 = ( REPRESENTATION_RELATIONSHIP('','',#38213,#38190) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#42689) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#42689 = ITEM_DEFINED_TRANSFORMATION('','',#11,#38191); +#42690 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #42691); +#42691 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','=>[0:1:1:23]','',#38185, + #38208,$); +#42692 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#38210)); +#42693 = SHAPE_DEFINITION_REPRESENTATION(#42694,#42700); +#42694 = PRODUCT_DEFINITION_SHAPE('','',#42695); +#42695 = PRODUCT_DEFINITION('design','',#42696,#42699); +#42696 = PRODUCT_DEFINITION_FORMATION('','',#42697); +#42697 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#42698)); +#42698 = PRODUCT_CONTEXT('',#2,'mechanical'); +#42699 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#42700 = SHAPE_REPRESENTATION('',(#11,#42701),#42705); +#42701 = AXIS2_PLACEMENT_3D('',#42702,#42703,#42704); +#42702 = CARTESIAN_POINT('',(0.,0.,0.)); +#42703 = DIRECTION('',(0.,0.,1.)); +#42704 = DIRECTION('',(1.,0.,-0.)); +#42705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#42709)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#42706,#42707,#42708)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#42706 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#42707 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#42708 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#42709 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#42706, + 'distance_accuracy_value','confusion accuracy'); +#42710 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#42711,#42713); +#42711 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#42712) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#42712 = ITEM_DEFINED_TRANSFORMATION('','',#11,#91); +#42713 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #42714); +#42714 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','C34','',#5,#42695,$); +#42715 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#42697)); +#42716 = SHAPE_DEFINITION_REPRESENTATION(#42717,#42723); +#42717 = PRODUCT_DEFINITION_SHAPE('','',#42718); +#42718 = PRODUCT_DEFINITION('design','',#42719,#42722); +#42719 = PRODUCT_DEFINITION_FORMATION('','',#42720); +#42720 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#42721)); +#42721 = PRODUCT_CONTEXT('',#2,'mechanical'); +#42722 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#42723 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#42724),#43578); +#42724 = MANIFOLD_SOLID_BREP('',#42725); +#42725 = CLOSED_SHELL('',(#42726,#42802,#42833,#42858,#42883,#42907, + #42931,#42956,#42981,#42998,#43084,#43116,#43140,#43165,#43189, + #43214,#43238,#43263,#43280,#43366,#43397,#43422,#43447,#43471, + #43495,#43520,#43545,#43562)); +#42726 = ADVANCED_FACE('',(#42727),#42797,.F.); +#42727 = FACE_BOUND('',#42728,.F.); +#42728 = EDGE_LOOP('',(#42729,#42739,#42748,#42756,#42765,#42773,#42782, + #42790)); +#42729 = ORIENTED_EDGE('',*,*,#42730,.F.); +#42730 = EDGE_CURVE('',#42731,#42733,#42735,.T.); +#42731 = VERTEX_POINT('',#42732); +#42732 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#42733 = VERTEX_POINT('',#42734); +#42734 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#42735 = LINE('',#42736,#42737); +#42736 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42737 = VECTOR('',#42738,1.); +#42738 = DIRECTION('',(0.,0.,1.)); +#42739 = ORIENTED_EDGE('',*,*,#42740,.T.); +#42740 = EDGE_CURVE('',#42731,#42741,#42743,.T.); +#42741 = VERTEX_POINT('',#42742); +#42742 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#42743 = CIRCLE('',#42744,4.E-02); +#42744 = AXIS2_PLACEMENT_3D('',#42745,#42746,#42747); +#42745 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#42746 = DIRECTION('',(1.,0.,-0.)); +#42747 = DIRECTION('',(0.,0.,1.)); +#42748 = ORIENTED_EDGE('',*,*,#42749,.T.); +#42749 = EDGE_CURVE('',#42741,#42750,#42752,.T.); +#42750 = VERTEX_POINT('',#42751); +#42751 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#42752 = LINE('',#42753,#42754); +#42753 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42754 = VECTOR('',#42755,1.); +#42755 = DIRECTION('',(0.,1.,0.)); +#42756 = ORIENTED_EDGE('',*,*,#42757,.F.); +#42757 = EDGE_CURVE('',#42758,#42750,#42760,.T.); +#42758 = VERTEX_POINT('',#42759); +#42759 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#42760 = CIRCLE('',#42761,4.E-02); +#42761 = AXIS2_PLACEMENT_3D('',#42762,#42763,#42764); +#42762 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#42763 = DIRECTION('',(-1.,0.,0.)); +#42764 = DIRECTION('',(0.,0.,1.)); +#42765 = ORIENTED_EDGE('',*,*,#42766,.T.); +#42766 = EDGE_CURVE('',#42758,#42767,#42769,.T.); +#42767 = VERTEX_POINT('',#42768); +#42768 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#42769 = LINE('',#42770,#42771); +#42770 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#42771 = VECTOR('',#42772,1.); +#42772 = DIRECTION('',(0.,0.,1.)); +#42773 = ORIENTED_EDGE('',*,*,#42774,.T.); +#42774 = EDGE_CURVE('',#42767,#42775,#42777,.T.); +#42775 = VERTEX_POINT('',#42776); +#42776 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#42777 = CIRCLE('',#42778,4.E-02); +#42778 = AXIS2_PLACEMENT_3D('',#42779,#42780,#42781); +#42779 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#42780 = DIRECTION('',(1.,0.,-0.)); +#42781 = DIRECTION('',(0.,0.,1.)); +#42782 = ORIENTED_EDGE('',*,*,#42783,.F.); +#42783 = EDGE_CURVE('',#42784,#42775,#42786,.T.); +#42784 = VERTEX_POINT('',#42785); +#42785 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#42786 = LINE('',#42787,#42788); +#42787 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#42788 = VECTOR('',#42789,1.); +#42789 = DIRECTION('',(0.,1.,0.)); +#42790 = ORIENTED_EDGE('',*,*,#42791,.F.); +#42791 = EDGE_CURVE('',#42733,#42784,#42792,.T.); +#42792 = CIRCLE('',#42793,4.E-02); +#42793 = AXIS2_PLACEMENT_3D('',#42794,#42795,#42796); +#42794 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#42795 = DIRECTION('',(-1.,0.,0.)); +#42796 = DIRECTION('',(0.,0.,1.)); +#42797 = PLANE('',#42798); +#42798 = AXIS2_PLACEMENT_3D('',#42799,#42800,#42801); +#42799 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42800 = DIRECTION('',(1.,0.,0.)); +#42801 = DIRECTION('',(0.,0.,1.)); +#42802 = ADVANCED_FACE('',(#42803),#42828,.F.); +#42803 = FACE_BOUND('',#42804,.F.); +#42804 = EDGE_LOOP('',(#42805,#42815,#42821,#42822)); +#42805 = ORIENTED_EDGE('',*,*,#42806,.F.); +#42806 = EDGE_CURVE('',#42807,#42809,#42811,.T.); +#42807 = VERTEX_POINT('',#42808); +#42808 = CARTESIAN_POINT('',(-0.6,-0.625,4.E-02)); +#42809 = VERTEX_POINT('',#42810); +#42810 = CARTESIAN_POINT('',(-0.6,-0.625,1.21)); +#42811 = LINE('',#42812,#42813); +#42812 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#42813 = VECTOR('',#42814,1.); +#42814 = DIRECTION('',(0.,0.,1.)); +#42815 = ORIENTED_EDGE('',*,*,#42816,.F.); +#42816 = EDGE_CURVE('',#42731,#42807,#42817,.T.); +#42817 = LINE('',#42818,#42819); +#42818 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#42819 = VECTOR('',#42820,1.); +#42820 = DIRECTION('',(1.,0.,0.)); +#42821 = ORIENTED_EDGE('',*,*,#42730,.T.); +#42822 = ORIENTED_EDGE('',*,*,#42823,.T.); +#42823 = EDGE_CURVE('',#42733,#42809,#42824,.T.); +#42824 = LINE('',#42825,#42826); +#42825 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#42826 = VECTOR('',#42827,1.); +#42827 = DIRECTION('',(1.,0.,0.)); +#42828 = PLANE('',#42829); +#42829 = AXIS2_PLACEMENT_3D('',#42830,#42831,#42832); +#42830 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42831 = DIRECTION('',(0.,1.,0.)); +#42832 = DIRECTION('',(0.,-0.,1.)); +#42833 = ADVANCED_FACE('',(#42834),#42853,.T.); +#42834 = FACE_BOUND('',#42835,.T.); +#42835 = EDGE_LOOP('',(#42836,#42837,#42845,#42852)); +#42836 = ORIENTED_EDGE('',*,*,#42740,.T.); +#42837 = ORIENTED_EDGE('',*,*,#42838,.T.); +#42838 = EDGE_CURVE('',#42741,#42839,#42841,.T.); +#42839 = VERTEX_POINT('',#42840); +#42840 = CARTESIAN_POINT('',(-0.6,-0.585,0.)); +#42841 = LINE('',#42842,#42843); +#42842 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#42843 = VECTOR('',#42844,1.); +#42844 = DIRECTION('',(1.,0.,0.)); +#42845 = ORIENTED_EDGE('',*,*,#42846,.F.); +#42846 = EDGE_CURVE('',#42807,#42839,#42847,.T.); +#42847 = CIRCLE('',#42848,4.E-02); +#42848 = AXIS2_PLACEMENT_3D('',#42849,#42850,#42851); +#42849 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#42850 = DIRECTION('',(1.,0.,-0.)); +#42851 = DIRECTION('',(0.,0.,1.)); +#42852 = ORIENTED_EDGE('',*,*,#42816,.F.); +#42853 = CYLINDRICAL_SURFACE('',#42854,4.E-02); +#42854 = AXIS2_PLACEMENT_3D('',#42855,#42856,#42857); +#42855 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#42856 = DIRECTION('',(1.,0.,0.)); +#42857 = DIRECTION('',(0.,-1.,0.)); +#42858 = ADVANCED_FACE('',(#42859),#42878,.T.); +#42859 = FACE_BOUND('',#42860,.T.); +#42860 = EDGE_LOOP('',(#42861,#42862,#42871,#42877)); +#42861 = ORIENTED_EDGE('',*,*,#42823,.T.); +#42862 = ORIENTED_EDGE('',*,*,#42863,.T.); +#42863 = EDGE_CURVE('',#42809,#42864,#42866,.T.); +#42864 = VERTEX_POINT('',#42865); +#42865 = CARTESIAN_POINT('',(-0.6,-0.585,1.25)); +#42866 = CIRCLE('',#42867,4.E-02); +#42867 = AXIS2_PLACEMENT_3D('',#42868,#42869,#42870); +#42868 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#42869 = DIRECTION('',(-1.,0.,0.)); +#42870 = DIRECTION('',(0.,0.,1.)); +#42871 = ORIENTED_EDGE('',*,*,#42872,.F.); +#42872 = EDGE_CURVE('',#42784,#42864,#42873,.T.); +#42873 = LINE('',#42874,#42875); +#42874 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#42875 = VECTOR('',#42876,1.); +#42876 = DIRECTION('',(1.,0.,0.)); +#42877 = ORIENTED_EDGE('',*,*,#42791,.F.); +#42878 = CYLINDRICAL_SURFACE('',#42879,4.E-02); +#42879 = AXIS2_PLACEMENT_3D('',#42880,#42881,#42882); +#42880 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#42881 = DIRECTION('',(1.,0.,0.)); +#42882 = DIRECTION('',(0.,-1.,0.)); +#42883 = ADVANCED_FACE('',(#42884),#42902,.F.); +#42884 = FACE_BOUND('',#42885,.F.); +#42885 = EDGE_LOOP('',(#42886,#42887,#42888,#42896)); +#42886 = ORIENTED_EDGE('',*,*,#42749,.F.); +#42887 = ORIENTED_EDGE('',*,*,#42838,.T.); +#42888 = ORIENTED_EDGE('',*,*,#42889,.T.); +#42889 = EDGE_CURVE('',#42839,#42890,#42892,.T.); +#42890 = VERTEX_POINT('',#42891); +#42891 = CARTESIAN_POINT('',(-0.6,0.585,0.)); +#42892 = LINE('',#42893,#42894); +#42893 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#42894 = VECTOR('',#42895,1.); +#42895 = DIRECTION('',(0.,1.,0.)); +#42896 = ORIENTED_EDGE('',*,*,#42897,.F.); +#42897 = EDGE_CURVE('',#42750,#42890,#42898,.T.); +#42898 = LINE('',#42899,#42900); +#42899 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#42900 = VECTOR('',#42901,1.); +#42901 = DIRECTION('',(1.,0.,0.)); +#42902 = PLANE('',#42903); +#42903 = AXIS2_PLACEMENT_3D('',#42904,#42905,#42906); +#42904 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#42905 = DIRECTION('',(0.,0.,1.)); +#42906 = DIRECTION('',(1.,0.,-0.)); +#42907 = ADVANCED_FACE('',(#42908),#42926,.T.); +#42908 = FACE_BOUND('',#42909,.T.); +#42909 = EDGE_LOOP('',(#42910,#42911,#42912,#42920)); +#42910 = ORIENTED_EDGE('',*,*,#42783,.F.); +#42911 = ORIENTED_EDGE('',*,*,#42872,.T.); +#42912 = ORIENTED_EDGE('',*,*,#42913,.T.); +#42913 = EDGE_CURVE('',#42864,#42914,#42916,.T.); +#42914 = VERTEX_POINT('',#42915); +#42915 = CARTESIAN_POINT('',(-0.6,0.585,1.25)); +#42916 = LINE('',#42917,#42918); +#42917 = CARTESIAN_POINT('',(-0.6,-0.625,1.25)); +#42918 = VECTOR('',#42919,1.); +#42919 = DIRECTION('',(0.,1.,0.)); +#42920 = ORIENTED_EDGE('',*,*,#42921,.F.); +#42921 = EDGE_CURVE('',#42775,#42914,#42922,.T.); +#42922 = LINE('',#42923,#42924); +#42923 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#42924 = VECTOR('',#42925,1.); +#42925 = DIRECTION('',(1.,0.,0.)); +#42926 = PLANE('',#42927); +#42927 = AXIS2_PLACEMENT_3D('',#42928,#42929,#42930); +#42928 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#42929 = DIRECTION('',(0.,0.,1.)); +#42930 = DIRECTION('',(1.,0.,-0.)); +#42931 = ADVANCED_FACE('',(#42932),#42951,.T.); +#42932 = FACE_BOUND('',#42933,.T.); +#42933 = EDGE_LOOP('',(#42934,#42942,#42949,#42950)); +#42934 = ORIENTED_EDGE('',*,*,#42935,.T.); +#42935 = EDGE_CURVE('',#42758,#42936,#42938,.T.); +#42936 = VERTEX_POINT('',#42937); +#42937 = CARTESIAN_POINT('',(-0.6,0.625,4.E-02)); +#42938 = LINE('',#42939,#42940); +#42939 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#42940 = VECTOR('',#42941,1.); +#42941 = DIRECTION('',(1.,0.,0.)); +#42942 = ORIENTED_EDGE('',*,*,#42943,.T.); +#42943 = EDGE_CURVE('',#42936,#42890,#42944,.T.); +#42944 = CIRCLE('',#42945,4.E-02); +#42945 = AXIS2_PLACEMENT_3D('',#42946,#42947,#42948); +#42946 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#42947 = DIRECTION('',(-1.,0.,0.)); +#42948 = DIRECTION('',(0.,0.,1.)); +#42949 = ORIENTED_EDGE('',*,*,#42897,.F.); +#42950 = ORIENTED_EDGE('',*,*,#42757,.F.); +#42951 = CYLINDRICAL_SURFACE('',#42952,4.E-02); +#42952 = AXIS2_PLACEMENT_3D('',#42953,#42954,#42955); +#42953 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#42954 = DIRECTION('',(1.,0.,0.)); +#42955 = DIRECTION('',(-0.,1.,0.)); +#42956 = ADVANCED_FACE('',(#42957),#42976,.T.); +#42957 = FACE_BOUND('',#42958,.T.); +#42958 = EDGE_LOOP('',(#42959,#42960,#42961,#42970)); +#42959 = ORIENTED_EDGE('',*,*,#42774,.T.); +#42960 = ORIENTED_EDGE('',*,*,#42921,.T.); +#42961 = ORIENTED_EDGE('',*,*,#42962,.F.); +#42962 = EDGE_CURVE('',#42963,#42914,#42965,.T.); +#42963 = VERTEX_POINT('',#42964); +#42964 = CARTESIAN_POINT('',(-0.6,0.625,1.21)); +#42965 = CIRCLE('',#42966,4.E-02); +#42966 = AXIS2_PLACEMENT_3D('',#42967,#42968,#42969); +#42967 = CARTESIAN_POINT('',(-0.6,0.585,1.21)); +#42968 = DIRECTION('',(1.,0.,-0.)); +#42969 = DIRECTION('',(0.,0.,1.)); +#42970 = ORIENTED_EDGE('',*,*,#42971,.F.); +#42971 = EDGE_CURVE('',#42767,#42963,#42972,.T.); +#42972 = LINE('',#42973,#42974); +#42973 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#42974 = VECTOR('',#42975,1.); +#42975 = DIRECTION('',(1.,0.,0.)); +#42976 = CYLINDRICAL_SURFACE('',#42977,4.E-02); +#42977 = AXIS2_PLACEMENT_3D('',#42978,#42979,#42980); +#42978 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#42979 = DIRECTION('',(1.,0.,0.)); +#42980 = DIRECTION('',(-0.,1.,0.)); +#42981 = ADVANCED_FACE('',(#42982),#42993,.T.); +#42982 = FACE_BOUND('',#42983,.T.); +#42983 = EDGE_LOOP('',(#42984,#42990,#42991,#42992)); +#42984 = ORIENTED_EDGE('',*,*,#42985,.F.); +#42985 = EDGE_CURVE('',#42936,#42963,#42986,.T.); +#42986 = LINE('',#42987,#42988); +#42987 = CARTESIAN_POINT('',(-0.6,0.625,0.)); +#42988 = VECTOR('',#42989,1.); +#42989 = DIRECTION('',(0.,0.,1.)); +#42990 = ORIENTED_EDGE('',*,*,#42935,.F.); +#42991 = ORIENTED_EDGE('',*,*,#42766,.T.); +#42992 = ORIENTED_EDGE('',*,*,#42971,.T.); +#42993 = PLANE('',#42994); +#42994 = AXIS2_PLACEMENT_3D('',#42995,#42996,#42997); +#42995 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#42996 = DIRECTION('',(0.,1.,0.)); +#42997 = DIRECTION('',(0.,-0.,1.)); +#42998 = ADVANCED_FACE('',(#42999,#43009),#43079,.T.); +#42999 = FACE_BOUND('',#43000,.T.); +#43000 = EDGE_LOOP('',(#43001,#43002,#43003,#43004,#43005,#43006,#43007, + #43008)); +#43001 = ORIENTED_EDGE('',*,*,#42806,.F.); +#43002 = ORIENTED_EDGE('',*,*,#42846,.T.); +#43003 = ORIENTED_EDGE('',*,*,#42889,.T.); +#43004 = ORIENTED_EDGE('',*,*,#42943,.F.); +#43005 = ORIENTED_EDGE('',*,*,#42985,.T.); +#43006 = ORIENTED_EDGE('',*,*,#42962,.T.); +#43007 = ORIENTED_EDGE('',*,*,#42913,.F.); +#43008 = ORIENTED_EDGE('',*,*,#42863,.F.); +#43009 = FACE_BOUND('',#43010,.T.); +#43010 = EDGE_LOOP('',(#43011,#43022,#43030,#43039,#43047,#43056,#43064, + #43073)); +#43011 = ORIENTED_EDGE('',*,*,#43012,.F.); +#43012 = EDGE_CURVE('',#43013,#43015,#43017,.T.); +#43013 = VERTEX_POINT('',#43014); +#43014 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#43015 = VERTEX_POINT('',#43016); +#43016 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#43017 = CIRCLE('',#43018,4.E-02); +#43018 = AXIS2_PLACEMENT_3D('',#43019,#43020,#43021); +#43019 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#43020 = DIRECTION('',(1.,0.,-0.)); +#43021 = DIRECTION('',(0.,0.,1.)); +#43022 = ORIENTED_EDGE('',*,*,#43023,.T.); +#43023 = EDGE_CURVE('',#43013,#43024,#43026,.T.); +#43024 = VERTEX_POINT('',#43025); +#43025 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#43026 = LINE('',#43027,#43028); +#43027 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43028 = VECTOR('',#43029,1.); +#43029 = DIRECTION('',(0.,0.,1.)); +#43030 = ORIENTED_EDGE('',*,*,#43031,.T.); +#43031 = EDGE_CURVE('',#43024,#43032,#43034,.T.); +#43032 = VERTEX_POINT('',#43033); +#43033 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#43034 = CIRCLE('',#43035,4.E-02); +#43035 = AXIS2_PLACEMENT_3D('',#43036,#43037,#43038); +#43036 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#43037 = DIRECTION('',(-1.,0.,0.)); +#43038 = DIRECTION('',(0.,0.,1.)); +#43039 = ORIENTED_EDGE('',*,*,#43040,.T.); +#43040 = EDGE_CURVE('',#43032,#43041,#43043,.T.); +#43041 = VERTEX_POINT('',#43042); +#43042 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#43043 = LINE('',#43044,#43045); +#43044 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#43045 = VECTOR('',#43046,1.); +#43046 = DIRECTION('',(0.,1.,0.)); +#43047 = ORIENTED_EDGE('',*,*,#43048,.F.); +#43048 = EDGE_CURVE('',#43049,#43041,#43051,.T.); +#43049 = VERTEX_POINT('',#43050); +#43050 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#43051 = CIRCLE('',#43052,4.E-02); +#43052 = AXIS2_PLACEMENT_3D('',#43053,#43054,#43055); +#43053 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#43054 = DIRECTION('',(1.,0.,-0.)); +#43055 = DIRECTION('',(0.,0.,1.)); +#43056 = ORIENTED_EDGE('',*,*,#43057,.F.); +#43057 = EDGE_CURVE('',#43058,#43049,#43060,.T.); +#43058 = VERTEX_POINT('',#43059); +#43059 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#43060 = LINE('',#43061,#43062); +#43061 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#43062 = VECTOR('',#43063,1.); +#43063 = DIRECTION('',(0.,0.,1.)); +#43064 = ORIENTED_EDGE('',*,*,#43065,.T.); +#43065 = EDGE_CURVE('',#43058,#43066,#43068,.T.); +#43066 = VERTEX_POINT('',#43067); +#43067 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#43068 = CIRCLE('',#43069,4.E-02); +#43069 = AXIS2_PLACEMENT_3D('',#43070,#43071,#43072); +#43070 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#43071 = DIRECTION('',(-1.,0.,0.)); +#43072 = DIRECTION('',(0.,0.,1.)); +#43073 = ORIENTED_EDGE('',*,*,#43074,.F.); +#43074 = EDGE_CURVE('',#43015,#43066,#43075,.T.); +#43075 = LINE('',#43076,#43077); +#43076 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43077 = VECTOR('',#43078,1.); +#43078 = DIRECTION('',(0.,1.,0.)); +#43079 = PLANE('',#43080); +#43080 = AXIS2_PLACEMENT_3D('',#43081,#43082,#43083); +#43081 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#43082 = DIRECTION('',(1.,0.,0.)); +#43083 = DIRECTION('',(0.,0.,1.)); +#43084 = ADVANCED_FACE('',(#43085),#43111,.T.); +#43085 = FACE_BOUND('',#43086,.T.); +#43086 = EDGE_LOOP('',(#43087,#43088,#43096,#43105)); +#43087 = ORIENTED_EDGE('',*,*,#43012,.T.); +#43088 = ORIENTED_EDGE('',*,*,#43089,.T.); +#43089 = EDGE_CURVE('',#43015,#43090,#43092,.T.); +#43090 = VERTEX_POINT('',#43091); +#43091 = CARTESIAN_POINT('',(0.6,-0.545,4.E-02)); +#43092 = LINE('',#43093,#43094); +#43093 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#43094 = VECTOR('',#43095,1.); +#43095 = DIRECTION('',(1.,0.,0.)); +#43096 = ORIENTED_EDGE('',*,*,#43097,.F.); +#43097 = EDGE_CURVE('',#43098,#43090,#43100,.T.); +#43098 = VERTEX_POINT('',#43099); +#43099 = CARTESIAN_POINT('',(0.6,-0.585,8.E-02)); +#43100 = CIRCLE('',#43101,4.E-02); +#43101 = AXIS2_PLACEMENT_3D('',#43102,#43103,#43104); +#43102 = CARTESIAN_POINT('',(0.6,-0.545,8.E-02)); +#43103 = DIRECTION('',(1.,0.,-0.)); +#43104 = DIRECTION('',(0.,0.,1.)); +#43105 = ORIENTED_EDGE('',*,*,#43106,.F.); +#43106 = EDGE_CURVE('',#43013,#43098,#43107,.T.); +#43107 = LINE('',#43108,#43109); +#43108 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#43109 = VECTOR('',#43110,1.); +#43110 = DIRECTION('',(1.,0.,0.)); +#43111 = CYLINDRICAL_SURFACE('',#43112,4.E-02); +#43112 = AXIS2_PLACEMENT_3D('',#43113,#43114,#43115); +#43113 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#43114 = DIRECTION('',(1.,0.,0.)); +#43115 = DIRECTION('',(0.,-1.,0.)); +#43116 = ADVANCED_FACE('',(#43117),#43135,.F.); +#43117 = FACE_BOUND('',#43118,.F.); +#43118 = EDGE_LOOP('',(#43119,#43120,#43121,#43129)); +#43119 = ORIENTED_EDGE('',*,*,#43074,.F.); +#43120 = ORIENTED_EDGE('',*,*,#43089,.T.); +#43121 = ORIENTED_EDGE('',*,*,#43122,.T.); +#43122 = EDGE_CURVE('',#43090,#43123,#43125,.T.); +#43123 = VERTEX_POINT('',#43124); +#43124 = CARTESIAN_POINT('',(0.6,0.545,4.E-02)); +#43125 = LINE('',#43126,#43127); +#43126 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43127 = VECTOR('',#43128,1.); +#43128 = DIRECTION('',(0.,1.,0.)); +#43129 = ORIENTED_EDGE('',*,*,#43130,.F.); +#43130 = EDGE_CURVE('',#43066,#43123,#43131,.T.); +#43131 = LINE('',#43132,#43133); +#43132 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#43133 = VECTOR('',#43134,1.); +#43134 = DIRECTION('',(1.,0.,0.)); +#43135 = PLANE('',#43136); +#43136 = AXIS2_PLACEMENT_3D('',#43137,#43138,#43139); +#43137 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43138 = DIRECTION('',(0.,0.,1.)); +#43139 = DIRECTION('',(1.,0.,-0.)); +#43140 = ADVANCED_FACE('',(#43141),#43160,.T.); +#43141 = FACE_BOUND('',#43142,.T.); +#43142 = EDGE_LOOP('',(#43143,#43151,#43158,#43159)); +#43143 = ORIENTED_EDGE('',*,*,#43144,.T.); +#43144 = EDGE_CURVE('',#43058,#43145,#43147,.T.); +#43145 = VERTEX_POINT('',#43146); +#43146 = CARTESIAN_POINT('',(0.6,0.585,8.E-02)); +#43147 = LINE('',#43148,#43149); +#43148 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#43149 = VECTOR('',#43150,1.); +#43150 = DIRECTION('',(1.,0.,0.)); +#43151 = ORIENTED_EDGE('',*,*,#43152,.T.); +#43152 = EDGE_CURVE('',#43145,#43123,#43153,.T.); +#43153 = CIRCLE('',#43154,4.E-02); +#43154 = AXIS2_PLACEMENT_3D('',#43155,#43156,#43157); +#43155 = CARTESIAN_POINT('',(0.6,0.545,8.E-02)); +#43156 = DIRECTION('',(-1.,0.,0.)); +#43157 = DIRECTION('',(0.,0.,1.)); +#43158 = ORIENTED_EDGE('',*,*,#43130,.F.); +#43159 = ORIENTED_EDGE('',*,*,#43065,.F.); +#43160 = CYLINDRICAL_SURFACE('',#43161,4.E-02); +#43161 = AXIS2_PLACEMENT_3D('',#43162,#43163,#43164); +#43162 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#43163 = DIRECTION('',(1.,0.,0.)); +#43164 = DIRECTION('',(-0.,1.,0.)); +#43165 = ADVANCED_FACE('',(#43166),#43184,.T.); +#43166 = FACE_BOUND('',#43167,.T.); +#43167 = EDGE_LOOP('',(#43168,#43176,#43177,#43178)); +#43168 = ORIENTED_EDGE('',*,*,#43169,.F.); +#43169 = EDGE_CURVE('',#43145,#43170,#43172,.T.); +#43170 = VERTEX_POINT('',#43171); +#43171 = CARTESIAN_POINT('',(0.6,0.585,1.17)); +#43172 = LINE('',#43173,#43174); +#43173 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#43174 = VECTOR('',#43175,1.); +#43175 = DIRECTION('',(0.,0.,1.)); +#43176 = ORIENTED_EDGE('',*,*,#43144,.F.); +#43177 = ORIENTED_EDGE('',*,*,#43057,.T.); +#43178 = ORIENTED_EDGE('',*,*,#43179,.T.); +#43179 = EDGE_CURVE('',#43049,#43170,#43180,.T.); +#43180 = LINE('',#43181,#43182); +#43181 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#43182 = VECTOR('',#43183,1.); +#43183 = DIRECTION('',(1.,0.,0.)); +#43184 = PLANE('',#43185); +#43185 = AXIS2_PLACEMENT_3D('',#43186,#43187,#43188); +#43186 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#43187 = DIRECTION('',(0.,1.,0.)); +#43188 = DIRECTION('',(0.,-0.,1.)); +#43189 = ADVANCED_FACE('',(#43190),#43209,.T.); +#43190 = FACE_BOUND('',#43191,.T.); +#43191 = EDGE_LOOP('',(#43192,#43193,#43201,#43208)); +#43192 = ORIENTED_EDGE('',*,*,#43048,.T.); +#43193 = ORIENTED_EDGE('',*,*,#43194,.T.); +#43194 = EDGE_CURVE('',#43041,#43195,#43197,.T.); +#43195 = VERTEX_POINT('',#43196); +#43196 = CARTESIAN_POINT('',(0.6,0.545,1.21)); +#43197 = LINE('',#43198,#43199); +#43198 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#43199 = VECTOR('',#43200,1.); +#43200 = DIRECTION('',(1.,0.,0.)); +#43201 = ORIENTED_EDGE('',*,*,#43202,.F.); +#43202 = EDGE_CURVE('',#43170,#43195,#43203,.T.); +#43203 = CIRCLE('',#43204,4.E-02); +#43204 = AXIS2_PLACEMENT_3D('',#43205,#43206,#43207); +#43205 = CARTESIAN_POINT('',(0.6,0.545,1.17)); +#43206 = DIRECTION('',(1.,0.,-0.)); +#43207 = DIRECTION('',(0.,0.,1.)); +#43208 = ORIENTED_EDGE('',*,*,#43179,.F.); +#43209 = CYLINDRICAL_SURFACE('',#43210,4.E-02); +#43210 = AXIS2_PLACEMENT_3D('',#43211,#43212,#43213); +#43211 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#43212 = DIRECTION('',(1.,0.,0.)); +#43213 = DIRECTION('',(-0.,1.,0.)); +#43214 = ADVANCED_FACE('',(#43215),#43233,.T.); +#43215 = FACE_BOUND('',#43216,.T.); +#43216 = EDGE_LOOP('',(#43217,#43218,#43226,#43232)); +#43217 = ORIENTED_EDGE('',*,*,#43040,.F.); +#43218 = ORIENTED_EDGE('',*,*,#43219,.T.); +#43219 = EDGE_CURVE('',#43032,#43220,#43222,.T.); +#43220 = VERTEX_POINT('',#43221); +#43221 = CARTESIAN_POINT('',(0.6,-0.545,1.21)); +#43222 = LINE('',#43223,#43224); +#43223 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#43224 = VECTOR('',#43225,1.); +#43225 = DIRECTION('',(1.,0.,0.)); +#43226 = ORIENTED_EDGE('',*,*,#43227,.T.); +#43227 = EDGE_CURVE('',#43220,#43195,#43228,.T.); +#43228 = LINE('',#43229,#43230); +#43229 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#43230 = VECTOR('',#43231,1.); +#43231 = DIRECTION('',(0.,1.,0.)); +#43232 = ORIENTED_EDGE('',*,*,#43194,.F.); +#43233 = PLANE('',#43234); +#43234 = AXIS2_PLACEMENT_3D('',#43235,#43236,#43237); +#43235 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#43236 = DIRECTION('',(0.,0.,1.)); +#43237 = DIRECTION('',(1.,0.,-0.)); +#43238 = ADVANCED_FACE('',(#43239),#43258,.T.); +#43239 = FACE_BOUND('',#43240,.T.); +#43240 = EDGE_LOOP('',(#43241,#43249,#43256,#43257)); +#43241 = ORIENTED_EDGE('',*,*,#43242,.T.); +#43242 = EDGE_CURVE('',#43024,#43243,#43245,.T.); +#43243 = VERTEX_POINT('',#43244); +#43244 = CARTESIAN_POINT('',(0.6,-0.585,1.17)); +#43245 = LINE('',#43246,#43247); +#43246 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#43247 = VECTOR('',#43248,1.); +#43248 = DIRECTION('',(1.,0.,0.)); +#43249 = ORIENTED_EDGE('',*,*,#43250,.T.); +#43250 = EDGE_CURVE('',#43243,#43220,#43251,.T.); +#43251 = CIRCLE('',#43252,4.E-02); +#43252 = AXIS2_PLACEMENT_3D('',#43253,#43254,#43255); +#43253 = CARTESIAN_POINT('',(0.6,-0.545,1.17)); +#43254 = DIRECTION('',(-1.,0.,0.)); +#43255 = DIRECTION('',(0.,0.,1.)); +#43256 = ORIENTED_EDGE('',*,*,#43219,.F.); +#43257 = ORIENTED_EDGE('',*,*,#43031,.F.); +#43258 = CYLINDRICAL_SURFACE('',#43259,4.E-02); +#43259 = AXIS2_PLACEMENT_3D('',#43260,#43261,#43262); +#43260 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#43261 = DIRECTION('',(1.,0.,0.)); +#43262 = DIRECTION('',(0.,-1.,0.)); +#43263 = ADVANCED_FACE('',(#43264),#43275,.F.); +#43264 = FACE_BOUND('',#43265,.F.); +#43265 = EDGE_LOOP('',(#43266,#43272,#43273,#43274)); +#43266 = ORIENTED_EDGE('',*,*,#43267,.F.); +#43267 = EDGE_CURVE('',#43098,#43243,#43268,.T.); +#43268 = LINE('',#43269,#43270); +#43269 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43270 = VECTOR('',#43271,1.); +#43271 = DIRECTION('',(0.,0.,1.)); +#43272 = ORIENTED_EDGE('',*,*,#43106,.F.); +#43273 = ORIENTED_EDGE('',*,*,#43023,.T.); +#43274 = ORIENTED_EDGE('',*,*,#43242,.T.); +#43275 = PLANE('',#43276); +#43276 = AXIS2_PLACEMENT_3D('',#43277,#43278,#43279); +#43277 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#43278 = DIRECTION('',(0.,1.,0.)); +#43279 = DIRECTION('',(0.,-0.,1.)); +#43280 = ADVANCED_FACE('',(#43281,#43351),#43361,.F.); +#43281 = FACE_BOUND('',#43282,.F.); +#43282 = EDGE_LOOP('',(#43283,#43293,#43302,#43310,#43319,#43327,#43336, + #43344)); +#43283 = ORIENTED_EDGE('',*,*,#43284,.F.); +#43284 = EDGE_CURVE('',#43285,#43287,#43289,.T.); +#43285 = VERTEX_POINT('',#43286); +#43286 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#43287 = VERTEX_POINT('',#43288); +#43288 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#43289 = LINE('',#43290,#43291); +#43290 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43291 = VECTOR('',#43292,1.); +#43292 = DIRECTION('',(0.,0.,1.)); +#43293 = ORIENTED_EDGE('',*,*,#43294,.T.); +#43294 = EDGE_CURVE('',#43285,#43295,#43297,.T.); +#43295 = VERTEX_POINT('',#43296); +#43296 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#43297 = CIRCLE('',#43298,4.E-02); +#43298 = AXIS2_PLACEMENT_3D('',#43299,#43300,#43301); +#43299 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43300 = DIRECTION('',(1.,0.,-0.)); +#43301 = DIRECTION('',(0.,0.,1.)); +#43302 = ORIENTED_EDGE('',*,*,#43303,.T.); +#43303 = EDGE_CURVE('',#43295,#43304,#43306,.T.); +#43304 = VERTEX_POINT('',#43305); +#43305 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#43306 = LINE('',#43307,#43308); +#43307 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43308 = VECTOR('',#43309,1.); +#43309 = DIRECTION('',(0.,1.,0.)); +#43310 = ORIENTED_EDGE('',*,*,#43311,.F.); +#43311 = EDGE_CURVE('',#43312,#43304,#43314,.T.); +#43312 = VERTEX_POINT('',#43313); +#43313 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#43314 = CIRCLE('',#43315,4.E-02); +#43315 = AXIS2_PLACEMENT_3D('',#43316,#43317,#43318); +#43316 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#43317 = DIRECTION('',(-1.,0.,0.)); +#43318 = DIRECTION('',(0.,0.,1.)); +#43319 = ORIENTED_EDGE('',*,*,#43320,.T.); +#43320 = EDGE_CURVE('',#43312,#43321,#43323,.T.); +#43321 = VERTEX_POINT('',#43322); +#43322 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#43323 = LINE('',#43324,#43325); +#43324 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#43325 = VECTOR('',#43326,1.); +#43326 = DIRECTION('',(0.,0.,1.)); +#43327 = ORIENTED_EDGE('',*,*,#43328,.T.); +#43328 = EDGE_CURVE('',#43321,#43329,#43331,.T.); +#43329 = VERTEX_POINT('',#43330); +#43330 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#43331 = CIRCLE('',#43332,4.E-02); +#43332 = AXIS2_PLACEMENT_3D('',#43333,#43334,#43335); +#43333 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#43334 = DIRECTION('',(1.,0.,-0.)); +#43335 = DIRECTION('',(0.,0.,1.)); +#43336 = ORIENTED_EDGE('',*,*,#43337,.F.); +#43337 = EDGE_CURVE('',#43338,#43329,#43340,.T.); +#43338 = VERTEX_POINT('',#43339); +#43339 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#43340 = LINE('',#43341,#43342); +#43341 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#43342 = VECTOR('',#43343,1.); +#43343 = DIRECTION('',(0.,1.,0.)); +#43344 = ORIENTED_EDGE('',*,*,#43345,.F.); +#43345 = EDGE_CURVE('',#43287,#43338,#43346,.T.); +#43346 = CIRCLE('',#43347,4.E-02); +#43347 = AXIS2_PLACEMENT_3D('',#43348,#43349,#43350); +#43348 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#43349 = DIRECTION('',(-1.,0.,0.)); +#43350 = DIRECTION('',(0.,0.,1.)); +#43351 = FACE_BOUND('',#43352,.F.); +#43352 = EDGE_LOOP('',(#43353,#43354,#43355,#43356,#43357,#43358,#43359, + #43360)); +#43353 = ORIENTED_EDGE('',*,*,#43097,.F.); +#43354 = ORIENTED_EDGE('',*,*,#43267,.T.); +#43355 = ORIENTED_EDGE('',*,*,#43250,.T.); +#43356 = ORIENTED_EDGE('',*,*,#43227,.T.); +#43357 = ORIENTED_EDGE('',*,*,#43202,.F.); +#43358 = ORIENTED_EDGE('',*,*,#43169,.F.); +#43359 = ORIENTED_EDGE('',*,*,#43152,.T.); +#43360 = ORIENTED_EDGE('',*,*,#43122,.F.); +#43361 = PLANE('',#43362); +#43362 = AXIS2_PLACEMENT_3D('',#43363,#43364,#43365); +#43363 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43364 = DIRECTION('',(1.,0.,0.)); +#43365 = DIRECTION('',(0.,0.,1.)); +#43366 = ADVANCED_FACE('',(#43367),#43392,.F.); +#43367 = FACE_BOUND('',#43368,.F.); +#43368 = EDGE_LOOP('',(#43369,#43379,#43385,#43386)); +#43369 = ORIENTED_EDGE('',*,*,#43370,.F.); +#43370 = EDGE_CURVE('',#43371,#43373,#43375,.T.); +#43371 = VERTEX_POINT('',#43372); +#43372 = CARTESIAN_POINT('',(1.,-0.625,4.E-02)); +#43373 = VERTEX_POINT('',#43374); +#43374 = CARTESIAN_POINT('',(1.,-0.625,1.21)); +#43375 = LINE('',#43376,#43377); +#43376 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#43377 = VECTOR('',#43378,1.); +#43378 = DIRECTION('',(0.,0.,1.)); +#43379 = ORIENTED_EDGE('',*,*,#43380,.F.); +#43380 = EDGE_CURVE('',#43285,#43371,#43381,.T.); +#43381 = LINE('',#43382,#43383); +#43382 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#43383 = VECTOR('',#43384,1.); +#43384 = DIRECTION('',(1.,0.,0.)); +#43385 = ORIENTED_EDGE('',*,*,#43284,.T.); +#43386 = ORIENTED_EDGE('',*,*,#43387,.T.); +#43387 = EDGE_CURVE('',#43287,#43373,#43388,.T.); +#43388 = LINE('',#43389,#43390); +#43389 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#43390 = VECTOR('',#43391,1.); +#43391 = DIRECTION('',(1.,0.,0.)); +#43392 = PLANE('',#43393); +#43393 = AXIS2_PLACEMENT_3D('',#43394,#43395,#43396); +#43394 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43395 = DIRECTION('',(0.,1.,0.)); +#43396 = DIRECTION('',(0.,-0.,1.)); +#43397 = ADVANCED_FACE('',(#43398),#43417,.T.); +#43398 = FACE_BOUND('',#43399,.T.); +#43399 = EDGE_LOOP('',(#43400,#43401,#43409,#43416)); +#43400 = ORIENTED_EDGE('',*,*,#43294,.T.); +#43401 = ORIENTED_EDGE('',*,*,#43402,.T.); +#43402 = EDGE_CURVE('',#43295,#43403,#43405,.T.); +#43403 = VERTEX_POINT('',#43404); +#43404 = CARTESIAN_POINT('',(1.,-0.585,0.)); +#43405 = LINE('',#43406,#43407); +#43406 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#43407 = VECTOR('',#43408,1.); +#43408 = DIRECTION('',(1.,0.,0.)); +#43409 = ORIENTED_EDGE('',*,*,#43410,.F.); +#43410 = EDGE_CURVE('',#43371,#43403,#43411,.T.); +#43411 = CIRCLE('',#43412,4.E-02); +#43412 = AXIS2_PLACEMENT_3D('',#43413,#43414,#43415); +#43413 = CARTESIAN_POINT('',(1.,-0.585,4.E-02)); +#43414 = DIRECTION('',(1.,0.,-0.)); +#43415 = DIRECTION('',(0.,0.,1.)); +#43416 = ORIENTED_EDGE('',*,*,#43380,.F.); +#43417 = CYLINDRICAL_SURFACE('',#43418,4.E-02); +#43418 = AXIS2_PLACEMENT_3D('',#43419,#43420,#43421); +#43419 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#43420 = DIRECTION('',(1.,0.,0.)); +#43421 = DIRECTION('',(0.,-1.,0.)); +#43422 = ADVANCED_FACE('',(#43423),#43442,.T.); +#43423 = FACE_BOUND('',#43424,.T.); +#43424 = EDGE_LOOP('',(#43425,#43426,#43435,#43441)); +#43425 = ORIENTED_EDGE('',*,*,#43387,.T.); +#43426 = ORIENTED_EDGE('',*,*,#43427,.T.); +#43427 = EDGE_CURVE('',#43373,#43428,#43430,.T.); +#43428 = VERTEX_POINT('',#43429); +#43429 = CARTESIAN_POINT('',(1.,-0.585,1.25)); +#43430 = CIRCLE('',#43431,4.E-02); +#43431 = AXIS2_PLACEMENT_3D('',#43432,#43433,#43434); +#43432 = CARTESIAN_POINT('',(1.,-0.585,1.21)); +#43433 = DIRECTION('',(-1.,0.,0.)); +#43434 = DIRECTION('',(0.,0.,1.)); +#43435 = ORIENTED_EDGE('',*,*,#43436,.F.); +#43436 = EDGE_CURVE('',#43338,#43428,#43437,.T.); +#43437 = LINE('',#43438,#43439); +#43438 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#43439 = VECTOR('',#43440,1.); +#43440 = DIRECTION('',(1.,0.,0.)); +#43441 = ORIENTED_EDGE('',*,*,#43345,.F.); +#43442 = CYLINDRICAL_SURFACE('',#43443,4.E-02); +#43443 = AXIS2_PLACEMENT_3D('',#43444,#43445,#43446); +#43444 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#43445 = DIRECTION('',(1.,0.,0.)); +#43446 = DIRECTION('',(0.,-1.,0.)); +#43447 = ADVANCED_FACE('',(#43448),#43466,.F.); +#43448 = FACE_BOUND('',#43449,.F.); +#43449 = EDGE_LOOP('',(#43450,#43451,#43452,#43460)); +#43450 = ORIENTED_EDGE('',*,*,#43303,.F.); +#43451 = ORIENTED_EDGE('',*,*,#43402,.T.); +#43452 = ORIENTED_EDGE('',*,*,#43453,.T.); +#43453 = EDGE_CURVE('',#43403,#43454,#43456,.T.); +#43454 = VERTEX_POINT('',#43455); +#43455 = CARTESIAN_POINT('',(1.,0.585,0.)); +#43456 = LINE('',#43457,#43458); +#43457 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#43458 = VECTOR('',#43459,1.); +#43459 = DIRECTION('',(0.,1.,0.)); +#43460 = ORIENTED_EDGE('',*,*,#43461,.F.); +#43461 = EDGE_CURVE('',#43304,#43454,#43462,.T.); +#43462 = LINE('',#43463,#43464); +#43463 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#43464 = VECTOR('',#43465,1.); +#43465 = DIRECTION('',(1.,0.,0.)); +#43466 = PLANE('',#43467); +#43467 = AXIS2_PLACEMENT_3D('',#43468,#43469,#43470); +#43468 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#43469 = DIRECTION('',(0.,0.,1.)); +#43470 = DIRECTION('',(1.,0.,-0.)); +#43471 = ADVANCED_FACE('',(#43472),#43490,.T.); +#43472 = FACE_BOUND('',#43473,.T.); +#43473 = EDGE_LOOP('',(#43474,#43475,#43476,#43484)); +#43474 = ORIENTED_EDGE('',*,*,#43337,.F.); +#43475 = ORIENTED_EDGE('',*,*,#43436,.T.); +#43476 = ORIENTED_EDGE('',*,*,#43477,.T.); +#43477 = EDGE_CURVE('',#43428,#43478,#43480,.T.); +#43478 = VERTEX_POINT('',#43479); +#43479 = CARTESIAN_POINT('',(1.,0.585,1.25)); +#43480 = LINE('',#43481,#43482); +#43481 = CARTESIAN_POINT('',(1.,-0.625,1.25)); +#43482 = VECTOR('',#43483,1.); +#43483 = DIRECTION('',(0.,1.,0.)); +#43484 = ORIENTED_EDGE('',*,*,#43485,.F.); +#43485 = EDGE_CURVE('',#43329,#43478,#43486,.T.); +#43486 = LINE('',#43487,#43488); +#43487 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#43488 = VECTOR('',#43489,1.); +#43489 = DIRECTION('',(1.,0.,0.)); +#43490 = PLANE('',#43491); +#43491 = AXIS2_PLACEMENT_3D('',#43492,#43493,#43494); +#43492 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#43493 = DIRECTION('',(0.,0.,1.)); +#43494 = DIRECTION('',(1.,0.,-0.)); +#43495 = ADVANCED_FACE('',(#43496),#43515,.T.); +#43496 = FACE_BOUND('',#43497,.T.); +#43497 = EDGE_LOOP('',(#43498,#43506,#43513,#43514)); +#43498 = ORIENTED_EDGE('',*,*,#43499,.T.); +#43499 = EDGE_CURVE('',#43312,#43500,#43502,.T.); +#43500 = VERTEX_POINT('',#43501); +#43501 = CARTESIAN_POINT('',(1.,0.625,4.E-02)); +#43502 = LINE('',#43503,#43504); +#43503 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#43504 = VECTOR('',#43505,1.); +#43505 = DIRECTION('',(1.,0.,0.)); +#43506 = ORIENTED_EDGE('',*,*,#43507,.T.); +#43507 = EDGE_CURVE('',#43500,#43454,#43508,.T.); +#43508 = CIRCLE('',#43509,4.E-02); +#43509 = AXIS2_PLACEMENT_3D('',#43510,#43511,#43512); +#43510 = CARTESIAN_POINT('',(1.,0.585,4.E-02)); +#43511 = DIRECTION('',(-1.,0.,0.)); +#43512 = DIRECTION('',(0.,0.,1.)); +#43513 = ORIENTED_EDGE('',*,*,#43461,.F.); +#43514 = ORIENTED_EDGE('',*,*,#43311,.F.); +#43515 = CYLINDRICAL_SURFACE('',#43516,4.E-02); +#43516 = AXIS2_PLACEMENT_3D('',#43517,#43518,#43519); +#43517 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#43518 = DIRECTION('',(1.,0.,0.)); +#43519 = DIRECTION('',(-0.,1.,0.)); +#43520 = ADVANCED_FACE('',(#43521),#43540,.T.); +#43521 = FACE_BOUND('',#43522,.T.); +#43522 = EDGE_LOOP('',(#43523,#43524,#43525,#43534)); +#43523 = ORIENTED_EDGE('',*,*,#43328,.T.); +#43524 = ORIENTED_EDGE('',*,*,#43485,.T.); +#43525 = ORIENTED_EDGE('',*,*,#43526,.F.); +#43526 = EDGE_CURVE('',#43527,#43478,#43529,.T.); +#43527 = VERTEX_POINT('',#43528); +#43528 = CARTESIAN_POINT('',(1.,0.625,1.21)); +#43529 = CIRCLE('',#43530,4.E-02); +#43530 = AXIS2_PLACEMENT_3D('',#43531,#43532,#43533); +#43531 = CARTESIAN_POINT('',(1.,0.585,1.21)); +#43532 = DIRECTION('',(1.,0.,-0.)); +#43533 = DIRECTION('',(0.,0.,1.)); +#43534 = ORIENTED_EDGE('',*,*,#43535,.F.); +#43535 = EDGE_CURVE('',#43321,#43527,#43536,.T.); +#43536 = LINE('',#43537,#43538); +#43537 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#43538 = VECTOR('',#43539,1.); +#43539 = DIRECTION('',(1.,0.,0.)); +#43540 = CYLINDRICAL_SURFACE('',#43541,4.E-02); +#43541 = AXIS2_PLACEMENT_3D('',#43542,#43543,#43544); +#43542 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#43543 = DIRECTION('',(1.,0.,0.)); +#43544 = DIRECTION('',(-0.,1.,0.)); +#43545 = ADVANCED_FACE('',(#43546),#43557,.T.); +#43546 = FACE_BOUND('',#43547,.T.); +#43547 = EDGE_LOOP('',(#43548,#43554,#43555,#43556)); +#43548 = ORIENTED_EDGE('',*,*,#43549,.F.); +#43549 = EDGE_CURVE('',#43500,#43527,#43550,.T.); +#43550 = LINE('',#43551,#43552); +#43551 = CARTESIAN_POINT('',(1.,0.625,0.)); +#43552 = VECTOR('',#43553,1.); +#43553 = DIRECTION('',(0.,0.,1.)); +#43554 = ORIENTED_EDGE('',*,*,#43499,.F.); +#43555 = ORIENTED_EDGE('',*,*,#43320,.T.); +#43556 = ORIENTED_EDGE('',*,*,#43535,.T.); +#43557 = PLANE('',#43558); +#43558 = AXIS2_PLACEMENT_3D('',#43559,#43560,#43561); +#43559 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#43560 = DIRECTION('',(0.,1.,0.)); +#43561 = DIRECTION('',(0.,-0.,1.)); +#43562 = ADVANCED_FACE('',(#43563),#43573,.T.); +#43563 = FACE_BOUND('',#43564,.T.); +#43564 = EDGE_LOOP('',(#43565,#43566,#43567,#43568,#43569,#43570,#43571, + #43572)); +#43565 = ORIENTED_EDGE('',*,*,#43370,.F.); +#43566 = ORIENTED_EDGE('',*,*,#43410,.T.); +#43567 = ORIENTED_EDGE('',*,*,#43453,.T.); +#43568 = ORIENTED_EDGE('',*,*,#43507,.F.); +#43569 = ORIENTED_EDGE('',*,*,#43549,.T.); +#43570 = ORIENTED_EDGE('',*,*,#43526,.T.); +#43571 = ORIENTED_EDGE('',*,*,#43477,.F.); +#43572 = ORIENTED_EDGE('',*,*,#43427,.F.); +#43573 = PLANE('',#43574); +#43574 = AXIS2_PLACEMENT_3D('',#43575,#43576,#43577); +#43575 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#43576 = DIRECTION('',(1.,0.,0.)); +#43577 = DIRECTION('',(0.,0.,1.)); +#43578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#43582)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#43579,#43580,#43581)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#43579 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#43580 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#43581 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#43582 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#43579, + 'distance_accuracy_value','confusion accuracy'); +#43583 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43584,#43586); +#43584 = ( REPRESENTATION_RELATIONSHIP('','',#42723,#42700) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43585) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43585 = ITEM_DEFINED_TRANSFORMATION('','',#11,#42701); +#43586 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43587); +#43587 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','=>[0:1:1:25]','',#42695, + #42718,$); +#43588 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#42720)); +#43589 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43590,#43592); +#43590 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43591) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43591 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95); +#43592 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43593); +#43593 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','R31','',#5,#523,$); +#43594 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43595,#43597); +#43595 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43596) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43596 = ITEM_DEFINED_TRANSFORMATION('','',#11,#99); +#43597 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43598); +#43598 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','Rfreq2','',#5,#523,$); +#43599 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43600,#43602); +#43600 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43601) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43601 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103); +#43602 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43603); +#43603 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('35','Rmled','',#5,#523,$); +#43604 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43605,#43607); +#43605 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43606) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43606 = ITEM_DEFINED_TRANSFORMATION('','',#11,#107); +#43607 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43608); +#43608 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('36','C40','',#5,#42695,$); +#43609 = SHAPE_DEFINITION_REPRESENTATION(#43610,#43616); +#43610 = PRODUCT_DEFINITION_SHAPE('','',#43611); +#43611 = PRODUCT_DEFINITION('design','',#43612,#43615); +#43612 = PRODUCT_DEFINITION_FORMATION('','',#43613); +#43613 = PRODUCT('PinSocket_1x10_P2.00mm_Vertical', + 'PinSocket_1x10_P2.00mm_Vertical','',(#43614)); +#43614 = PRODUCT_CONTEXT('',#2,'mechanical'); +#43615 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#43616 = SHAPE_REPRESENTATION('',(#11,#43617),#43621); +#43617 = AXIS2_PLACEMENT_3D('',#43618,#43619,#43620); +#43618 = CARTESIAN_POINT('',(0.,0.,0.)); +#43619 = DIRECTION('',(0.,0.,1.)); +#43620 = DIRECTION('',(1.,0.,-0.)); +#43621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#43625)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#43622,#43623,#43624)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#43622 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#43623 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#43624 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#43625 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#43622, + 'distance_accuracy_value','confusion accuracy'); +#43626 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43627,#43629); +#43627 = ( REPRESENTATION_RELATIONSHIP('','',#43616,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43628) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43628 = ITEM_DEFINED_TRANSFORMATION('','',#11,#111); +#43629 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43630); +#43630 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('38','J7','',#5,#43611,$); +#43631 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#43613)); +#43632 = SHAPE_DEFINITION_REPRESENTATION(#43633,#43639); +#43633 = PRODUCT_DEFINITION_SHAPE('','',#43634); +#43634 = PRODUCT_DEFINITION('design','',#43635,#43638); +#43635 = PRODUCT_DEFINITION_FORMATION('','',#43636); +#43636 = PRODUCT('PinSocket_1x10_P2.00mm_Vertical', + 'PinSocket_1x10_P2.00mm_Vertical','',(#43637)); +#43637 = PRODUCT_CONTEXT('',#2,'mechanical'); +#43638 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#43639 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#43640),#51682); +#43640 = MANIFOLD_SOLID_BREP('',#43641); +#43641 = CLOSED_SHELL('',(#43642,#43682,#43745,#43808,#43825,#44182, + #44204,#44221,#44898,#44910,#44922,#44953,#44977,#45001,#45018, + #45049,#45073,#45097,#45114,#45145,#45169,#45193,#45210,#45241, + #45265,#45289,#45306,#45337,#45361,#45385,#45402,#45433,#45457, + #45481,#45498,#45529,#45553,#45577,#45594,#45625,#45649,#45673, + #45690,#45721,#45745,#45769,#45786,#45817,#45841,#45865,#45882, + #45899,#45946,#45963,#46010,#46027,#46074,#46091,#46138,#46155, + #46202,#46219,#46266,#46283,#46330,#46347,#46394,#46411,#46458, + #46475,#46522,#46539,#46586,#46603,#46650,#46667,#46714,#46731, + #46778,#46795,#46842,#46859,#46906,#46923,#46970,#46987,#47034, + #47051,#47098,#47115,#47162,#47193,#47249,#47273,#47322,#47353, + #47409,#47433,#47482,#47513,#47569,#47593,#47642,#47673,#47729, + #47753,#47802,#47833,#47889,#47913,#47962,#47993,#48049,#48073, + #48122,#48153,#48209,#48233,#48282,#48313,#48369,#48393,#48442, + #48473,#48529,#48553,#48602,#48633,#48689,#48713,#48762,#48779, + #48796,#48813,#48830,#48842,#48859,#48876,#48893,#48910,#48922, + #48939,#48956,#48973,#48990,#49002,#49019,#49036,#49053,#49070, + #49082,#49099,#49116,#49133,#49150,#49162,#49179,#49196,#49213, + #49230,#49242,#49259,#49276,#49293,#49310,#49322,#49339,#49356, + #49373,#49390,#49402,#49419,#49436,#49453,#49470,#49482,#49499, + #49516,#49533,#49550,#49562,#49579,#49596,#49645,#49669,#49711, + #49728,#49745,#49762,#49811,#49835,#49877,#49894,#49911,#49928, + #49977,#50001,#50043,#50060,#50077,#50094,#50143,#50167,#50209, + #50226,#50243,#50260,#50309,#50333,#50375,#50392,#50409,#50426, + #50475,#50499,#50541,#50558,#50575,#50592,#50641,#50665,#50707, + #50724,#50741,#50758,#50807,#50831,#50873,#50890,#50907,#50924, + #50973,#50997,#51039,#51056,#51073,#51090,#51139,#51163,#51205, + #51222,#51239,#51256,#51268,#51285,#51302,#51314,#51331,#51348, + #51360,#51377,#51394,#51406,#51423,#51440,#51452,#51469,#51486, + #51498,#51515,#51532,#51544,#51561,#51578,#51590,#51607,#51624, + #51636,#51653,#51670)); +#43642 = ADVANCED_FACE('',(#43643),#43677,.F.); +#43643 = FACE_BOUND('',#43644,.F.); +#43644 = EDGE_LOOP('',(#43645,#43655,#43663,#43671)); +#43645 = ORIENTED_EDGE('',*,*,#43646,.T.); +#43646 = EDGE_CURVE('',#43647,#43649,#43651,.T.); +#43647 = VERTEX_POINT('',#43648); +#43648 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43649 = VERTEX_POINT('',#43650); +#43650 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#43651 = LINE('',#43652,#43653); +#43652 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43653 = VECTOR('',#43654,1.); +#43654 = DIRECTION('',(0.,0.,1.)); +#43655 = ORIENTED_EDGE('',*,*,#43656,.T.); +#43656 = EDGE_CURVE('',#43649,#43657,#43659,.T.); +#43657 = VERTEX_POINT('',#43658); +#43658 = CARTESIAN_POINT('',(1.,1.,5.6)); +#43659 = LINE('',#43660,#43661); +#43660 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#43661 = VECTOR('',#43662,1.); +#43662 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43663 = ORIENTED_EDGE('',*,*,#43664,.F.); +#43664 = EDGE_CURVE('',#43665,#43657,#43667,.T.); +#43665 = VERTEX_POINT('',#43666); +#43666 = CARTESIAN_POINT('',(1.,1.,0.)); +#43667 = LINE('',#43668,#43669); +#43668 = CARTESIAN_POINT('',(1.,1.,0.)); +#43669 = VECTOR('',#43670,1.); +#43670 = DIRECTION('',(0.,0.,1.)); +#43671 = ORIENTED_EDGE('',*,*,#43672,.F.); +#43672 = EDGE_CURVE('',#43647,#43665,#43673,.T.); +#43673 = LINE('',#43674,#43675); +#43674 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43675 = VECTOR('',#43676,1.); +#43676 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43677 = PLANE('',#43678); +#43678 = AXIS2_PLACEMENT_3D('',#43679,#43680,#43681); +#43679 = CARTESIAN_POINT('',(1.,-19.,0.)); +#43680 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43681 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43682 = ADVANCED_FACE('',(#43683),#43740,.F.); +#43683 = FACE_BOUND('',#43684,.F.); +#43684 = EDGE_LOOP('',(#43685,#43695,#43703,#43709,#43710,#43718,#43726, + #43734)); +#43685 = ORIENTED_EDGE('',*,*,#43686,.F.); +#43686 = EDGE_CURVE('',#43687,#43689,#43691,.T.); +#43687 = VERTEX_POINT('',#43688); +#43688 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43689 = VERTEX_POINT('',#43690); +#43690 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.)); +#43691 = LINE('',#43692,#43693); +#43692 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43693 = VECTOR('',#43694,1.); +#43694 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43695 = ORIENTED_EDGE('',*,*,#43696,.T.); +#43696 = EDGE_CURVE('',#43687,#43697,#43699,.T.); +#43697 = VERTEX_POINT('',#43698); +#43698 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#43699 = LINE('',#43700,#43701); +#43700 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43701 = VECTOR('',#43702,1.); +#43702 = DIRECTION('',(0.,0.,1.)); +#43703 = ORIENTED_EDGE('',*,*,#43704,.T.); +#43704 = EDGE_CURVE('',#43697,#43649,#43705,.T.); +#43705 = LINE('',#43706,#43707); +#43706 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#43707 = VECTOR('',#43708,1.); +#43708 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43709 = ORIENTED_EDGE('',*,*,#43646,.F.); +#43710 = ORIENTED_EDGE('',*,*,#43711,.F.); +#43711 = EDGE_CURVE('',#43712,#43647,#43714,.T.); +#43712 = VERTEX_POINT('',#43713); +#43713 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#43714 = LINE('',#43715,#43716); +#43715 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43716 = VECTOR('',#43717,1.); +#43717 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43718 = ORIENTED_EDGE('',*,*,#43719,.T.); +#43719 = EDGE_CURVE('',#43712,#43720,#43722,.T.); +#43720 = VERTEX_POINT('',#43721); +#43721 = CARTESIAN_POINT('',(0.666666666667,-19.,0.2)); +#43722 = LINE('',#43723,#43724); +#43723 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#43724 = VECTOR('',#43725,1.); +#43725 = DIRECTION('',(0.,0.,1.)); +#43726 = ORIENTED_EDGE('',*,*,#43727,.F.); +#43727 = EDGE_CURVE('',#43728,#43720,#43730,.T.); +#43728 = VERTEX_POINT('',#43729); +#43729 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.2)); +#43730 = LINE('',#43731,#43732); +#43731 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.2)); +#43732 = VECTOR('',#43733,1.); +#43733 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43734 = ORIENTED_EDGE('',*,*,#43735,.F.); +#43735 = EDGE_CURVE('',#43689,#43728,#43736,.T.); +#43736 = LINE('',#43737,#43738); +#43737 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.)); +#43738 = VECTOR('',#43739,1.); +#43739 = DIRECTION('',(0.,0.,1.)); +#43740 = PLANE('',#43741); +#43741 = AXIS2_PLACEMENT_3D('',#43742,#43743,#43744); +#43742 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#43743 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43744 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43745 = ADVANCED_FACE('',(#43746),#43803,.F.); +#43746 = FACE_BOUND('',#43747,.F.); +#43747 = EDGE_LOOP('',(#43748,#43756,#43757,#43765,#43773,#43781,#43789, + #43797)); +#43748 = ORIENTED_EDGE('',*,*,#43749,.F.); +#43749 = EDGE_CURVE('',#43665,#43750,#43752,.T.); +#43750 = VERTEX_POINT('',#43751); +#43751 = CARTESIAN_POINT('',(0.666666666667,1.,0.)); +#43752 = LINE('',#43753,#43754); +#43753 = CARTESIAN_POINT('',(1.,1.,0.)); +#43754 = VECTOR('',#43755,1.); +#43755 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43756 = ORIENTED_EDGE('',*,*,#43664,.T.); +#43757 = ORIENTED_EDGE('',*,*,#43758,.T.); +#43758 = EDGE_CURVE('',#43657,#43759,#43761,.T.); +#43759 = VERTEX_POINT('',#43760); +#43760 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#43761 = LINE('',#43762,#43763); +#43762 = CARTESIAN_POINT('',(1.,1.,5.6)); +#43763 = VECTOR('',#43764,1.); +#43764 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43765 = ORIENTED_EDGE('',*,*,#43766,.F.); +#43766 = EDGE_CURVE('',#43767,#43759,#43769,.T.); +#43767 = VERTEX_POINT('',#43768); +#43768 = CARTESIAN_POINT('',(-1.,1.,0.)); +#43769 = LINE('',#43770,#43771); +#43770 = CARTESIAN_POINT('',(-1.,1.,0.)); +#43771 = VECTOR('',#43772,1.); +#43772 = DIRECTION('',(0.,0.,1.)); +#43773 = ORIENTED_EDGE('',*,*,#43774,.F.); +#43774 = EDGE_CURVE('',#43775,#43767,#43777,.T.); +#43775 = VERTEX_POINT('',#43776); +#43776 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#43777 = LINE('',#43778,#43779); +#43778 = CARTESIAN_POINT('',(1.,1.,0.)); +#43779 = VECTOR('',#43780,1.); +#43780 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43781 = ORIENTED_EDGE('',*,*,#43782,.T.); +#43782 = EDGE_CURVE('',#43775,#43783,#43785,.T.); +#43783 = VERTEX_POINT('',#43784); +#43784 = CARTESIAN_POINT('',(-0.666666666667,1.,0.2)); +#43785 = LINE('',#43786,#43787); +#43786 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#43787 = VECTOR('',#43788,1.); +#43788 = DIRECTION('',(0.,0.,1.)); +#43789 = ORIENTED_EDGE('',*,*,#43790,.F.); +#43790 = EDGE_CURVE('',#43791,#43783,#43793,.T.); +#43791 = VERTEX_POINT('',#43792); +#43792 = CARTESIAN_POINT('',(0.666666666667,1.,0.2)); +#43793 = LINE('',#43794,#43795); +#43794 = CARTESIAN_POINT('',(0.666666666667,1.,0.2)); +#43795 = VECTOR('',#43796,1.); +#43796 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43797 = ORIENTED_EDGE('',*,*,#43798,.F.); +#43798 = EDGE_CURVE('',#43750,#43791,#43799,.T.); +#43799 = LINE('',#43800,#43801); +#43800 = CARTESIAN_POINT('',(0.666666666667,1.,0.)); +#43801 = VECTOR('',#43802,1.); +#43802 = DIRECTION('',(0.,0.,1.)); +#43803 = PLANE('',#43804); +#43804 = AXIS2_PLACEMENT_3D('',#43805,#43806,#43807); +#43805 = CARTESIAN_POINT('',(1.,1.,0.)); +#43806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43807 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43808 = ADVANCED_FACE('',(#43809),#43820,.F.); +#43809 = FACE_BOUND('',#43810,.F.); +#43810 = EDGE_LOOP('',(#43811,#43812,#43813,#43814)); +#43811 = ORIENTED_EDGE('',*,*,#43711,.T.); +#43812 = ORIENTED_EDGE('',*,*,#43672,.T.); +#43813 = ORIENTED_EDGE('',*,*,#43749,.T.); +#43814 = ORIENTED_EDGE('',*,*,#43815,.F.); +#43815 = EDGE_CURVE('',#43712,#43750,#43816,.T.); +#43816 = LINE('',#43817,#43818); +#43817 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#43818 = VECTOR('',#43819,1.); +#43819 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43820 = PLANE('',#43821); +#43821 = AXIS2_PLACEMENT_3D('',#43822,#43823,#43824); +#43822 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.)); +#43823 = DIRECTION('',(0.,0.,1.)); +#43824 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#43825 = ADVANCED_FACE('',(#43826,#43837,#43871,#43905,#43939,#43973, + #44007,#44041,#44075,#44109,#44143),#44177,.T.); +#43826 = FACE_BOUND('',#43827,.T.); +#43827 = EDGE_LOOP('',(#43828,#43829,#43830,#43836)); +#43828 = ORIENTED_EDGE('',*,*,#43656,.T.); +#43829 = ORIENTED_EDGE('',*,*,#43758,.T.); +#43830 = ORIENTED_EDGE('',*,*,#43831,.T.); +#43831 = EDGE_CURVE('',#43759,#43697,#43832,.T.); +#43832 = LINE('',#43833,#43834); +#43833 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#43834 = VECTOR('',#43835,1.); +#43835 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43836 = ORIENTED_EDGE('',*,*,#43704,.T.); +#43837 = FACE_BOUND('',#43838,.T.); +#43838 = EDGE_LOOP('',(#43839,#43849,#43857,#43865)); +#43839 = ORIENTED_EDGE('',*,*,#43840,.F.); +#43840 = EDGE_CURVE('',#43841,#43843,#43845,.T.); +#43841 = VERTEX_POINT('',#43842); +#43842 = CARTESIAN_POINT('',(0.6,-18.6,5.6)); +#43843 = VERTEX_POINT('',#43844); +#43844 = CARTESIAN_POINT('',(0.6,-17.4,5.6)); +#43845 = LINE('',#43846,#43847); +#43846 = CARTESIAN_POINT('',(0.6,-18.6,5.6)); +#43847 = VECTOR('',#43848,1.); +#43848 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43849 = ORIENTED_EDGE('',*,*,#43850,.F.); +#43850 = EDGE_CURVE('',#43851,#43841,#43853,.T.); +#43851 = VERTEX_POINT('',#43852); +#43852 = CARTESIAN_POINT('',(-0.6,-18.6,5.6)); +#43853 = LINE('',#43854,#43855); +#43854 = CARTESIAN_POINT('',(-0.6,-18.6,5.6)); +#43855 = VECTOR('',#43856,1.); +#43856 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43857 = ORIENTED_EDGE('',*,*,#43858,.F.); +#43858 = EDGE_CURVE('',#43859,#43851,#43861,.T.); +#43859 = VERTEX_POINT('',#43860); +#43860 = CARTESIAN_POINT('',(-0.6,-17.4,5.6)); +#43861 = LINE('',#43862,#43863); +#43862 = CARTESIAN_POINT('',(-0.6,-17.4,5.6)); +#43863 = VECTOR('',#43864,1.); +#43864 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43865 = ORIENTED_EDGE('',*,*,#43866,.F.); +#43866 = EDGE_CURVE('',#43843,#43859,#43867,.T.); +#43867 = LINE('',#43868,#43869); +#43868 = CARTESIAN_POINT('',(0.6,-17.4,5.6)); +#43869 = VECTOR('',#43870,1.); +#43870 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43871 = FACE_BOUND('',#43872,.T.); +#43872 = EDGE_LOOP('',(#43873,#43883,#43891,#43899)); +#43873 = ORIENTED_EDGE('',*,*,#43874,.F.); +#43874 = EDGE_CURVE('',#43875,#43877,#43879,.T.); +#43875 = VERTEX_POINT('',#43876); +#43876 = CARTESIAN_POINT('',(0.6,-16.6,5.6)); +#43877 = VERTEX_POINT('',#43878); +#43878 = CARTESIAN_POINT('',(0.6,-15.4,5.6)); +#43879 = LINE('',#43880,#43881); +#43880 = CARTESIAN_POINT('',(0.6,-16.6,5.6)); +#43881 = VECTOR('',#43882,1.); +#43882 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43883 = ORIENTED_EDGE('',*,*,#43884,.F.); +#43884 = EDGE_CURVE('',#43885,#43875,#43887,.T.); +#43885 = VERTEX_POINT('',#43886); +#43886 = CARTESIAN_POINT('',(-0.6,-16.6,5.6)); +#43887 = LINE('',#43888,#43889); +#43888 = CARTESIAN_POINT('',(-0.6,-16.6,5.6)); +#43889 = VECTOR('',#43890,1.); +#43890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43891 = ORIENTED_EDGE('',*,*,#43892,.F.); +#43892 = EDGE_CURVE('',#43893,#43885,#43895,.T.); +#43893 = VERTEX_POINT('',#43894); +#43894 = CARTESIAN_POINT('',(-0.6,-15.4,5.6)); +#43895 = LINE('',#43896,#43897); +#43896 = CARTESIAN_POINT('',(-0.6,-15.4,5.6)); +#43897 = VECTOR('',#43898,1.); +#43898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43899 = ORIENTED_EDGE('',*,*,#43900,.F.); +#43900 = EDGE_CURVE('',#43877,#43893,#43901,.T.); +#43901 = LINE('',#43902,#43903); +#43902 = CARTESIAN_POINT('',(0.6,-15.4,5.6)); +#43903 = VECTOR('',#43904,1.); +#43904 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43905 = FACE_BOUND('',#43906,.T.); +#43906 = EDGE_LOOP('',(#43907,#43917,#43925,#43933)); +#43907 = ORIENTED_EDGE('',*,*,#43908,.F.); +#43908 = EDGE_CURVE('',#43909,#43911,#43913,.T.); +#43909 = VERTEX_POINT('',#43910); +#43910 = CARTESIAN_POINT('',(0.6,-14.6,5.6)); +#43911 = VERTEX_POINT('',#43912); +#43912 = CARTESIAN_POINT('',(0.6,-13.4,5.6)); +#43913 = LINE('',#43914,#43915); +#43914 = CARTESIAN_POINT('',(0.6,-14.6,5.6)); +#43915 = VECTOR('',#43916,1.); +#43916 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43917 = ORIENTED_EDGE('',*,*,#43918,.F.); +#43918 = EDGE_CURVE('',#43919,#43909,#43921,.T.); +#43919 = VERTEX_POINT('',#43920); +#43920 = CARTESIAN_POINT('',(-0.6,-14.6,5.6)); +#43921 = LINE('',#43922,#43923); +#43922 = CARTESIAN_POINT('',(-0.6,-14.6,5.6)); +#43923 = VECTOR('',#43924,1.); +#43924 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43925 = ORIENTED_EDGE('',*,*,#43926,.F.); +#43926 = EDGE_CURVE('',#43927,#43919,#43929,.T.); +#43927 = VERTEX_POINT('',#43928); +#43928 = CARTESIAN_POINT('',(-0.6,-13.4,5.6)); +#43929 = LINE('',#43930,#43931); +#43930 = CARTESIAN_POINT('',(-0.6,-13.4,5.6)); +#43931 = VECTOR('',#43932,1.); +#43932 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43933 = ORIENTED_EDGE('',*,*,#43934,.F.); +#43934 = EDGE_CURVE('',#43911,#43927,#43935,.T.); +#43935 = LINE('',#43936,#43937); +#43936 = CARTESIAN_POINT('',(0.6,-13.4,5.6)); +#43937 = VECTOR('',#43938,1.); +#43938 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43939 = FACE_BOUND('',#43940,.T.); +#43940 = EDGE_LOOP('',(#43941,#43951,#43959,#43967)); +#43941 = ORIENTED_EDGE('',*,*,#43942,.F.); +#43942 = EDGE_CURVE('',#43943,#43945,#43947,.T.); +#43943 = VERTEX_POINT('',#43944); +#43944 = CARTESIAN_POINT('',(0.6,-12.6,5.6)); +#43945 = VERTEX_POINT('',#43946); +#43946 = CARTESIAN_POINT('',(0.6,-11.4,5.6)); +#43947 = LINE('',#43948,#43949); +#43948 = CARTESIAN_POINT('',(0.6,-12.6,5.6)); +#43949 = VECTOR('',#43950,1.); +#43950 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43951 = ORIENTED_EDGE('',*,*,#43952,.F.); +#43952 = EDGE_CURVE('',#43953,#43943,#43955,.T.); +#43953 = VERTEX_POINT('',#43954); +#43954 = CARTESIAN_POINT('',(-0.6,-12.6,5.6)); +#43955 = LINE('',#43956,#43957); +#43956 = CARTESIAN_POINT('',(-0.6,-12.6,5.6)); +#43957 = VECTOR('',#43958,1.); +#43958 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43959 = ORIENTED_EDGE('',*,*,#43960,.F.); +#43960 = EDGE_CURVE('',#43961,#43953,#43963,.T.); +#43961 = VERTEX_POINT('',#43962); +#43962 = CARTESIAN_POINT('',(-0.6,-11.4,5.6)); +#43963 = LINE('',#43964,#43965); +#43964 = CARTESIAN_POINT('',(-0.6,-11.4,5.6)); +#43965 = VECTOR('',#43966,1.); +#43966 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#43967 = ORIENTED_EDGE('',*,*,#43968,.F.); +#43968 = EDGE_CURVE('',#43945,#43961,#43969,.T.); +#43969 = LINE('',#43970,#43971); +#43970 = CARTESIAN_POINT('',(0.6,-11.4,5.6)); +#43971 = VECTOR('',#43972,1.); +#43972 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#43973 = FACE_BOUND('',#43974,.T.); +#43974 = EDGE_LOOP('',(#43975,#43985,#43993,#44001)); +#43975 = ORIENTED_EDGE('',*,*,#43976,.F.); +#43976 = EDGE_CURVE('',#43977,#43979,#43981,.T.); +#43977 = VERTEX_POINT('',#43978); +#43978 = CARTESIAN_POINT('',(0.6,-10.6,5.6)); +#43979 = VERTEX_POINT('',#43980); +#43980 = CARTESIAN_POINT('',(0.6,-9.4,5.6)); +#43981 = LINE('',#43982,#43983); +#43982 = CARTESIAN_POINT('',(0.6,-10.6,5.6)); +#43983 = VECTOR('',#43984,1.); +#43984 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#43985 = ORIENTED_EDGE('',*,*,#43986,.F.); +#43986 = EDGE_CURVE('',#43987,#43977,#43989,.T.); +#43987 = VERTEX_POINT('',#43988); +#43988 = CARTESIAN_POINT('',(-0.6,-10.6,5.6)); +#43989 = LINE('',#43990,#43991); +#43990 = CARTESIAN_POINT('',(-0.6,-10.6,5.6)); +#43991 = VECTOR('',#43992,1.); +#43992 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#43993 = ORIENTED_EDGE('',*,*,#43994,.F.); +#43994 = EDGE_CURVE('',#43995,#43987,#43997,.T.); +#43995 = VERTEX_POINT('',#43996); +#43996 = CARTESIAN_POINT('',(-0.6,-9.4,5.6)); +#43997 = LINE('',#43998,#43999); +#43998 = CARTESIAN_POINT('',(-0.6,-9.4,5.6)); +#43999 = VECTOR('',#44000,1.); +#44000 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44001 = ORIENTED_EDGE('',*,*,#44002,.F.); +#44002 = EDGE_CURVE('',#43979,#43995,#44003,.T.); +#44003 = LINE('',#44004,#44005); +#44004 = CARTESIAN_POINT('',(0.6,-9.4,5.6)); +#44005 = VECTOR('',#44006,1.); +#44006 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44007 = FACE_BOUND('',#44008,.T.); +#44008 = EDGE_LOOP('',(#44009,#44019,#44027,#44035)); +#44009 = ORIENTED_EDGE('',*,*,#44010,.F.); +#44010 = EDGE_CURVE('',#44011,#44013,#44015,.T.); +#44011 = VERTEX_POINT('',#44012); +#44012 = CARTESIAN_POINT('',(0.6,-8.6,5.6)); +#44013 = VERTEX_POINT('',#44014); +#44014 = CARTESIAN_POINT('',(0.6,-7.4,5.6)); +#44015 = LINE('',#44016,#44017); +#44016 = CARTESIAN_POINT('',(0.6,-8.6,5.6)); +#44017 = VECTOR('',#44018,1.); +#44018 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44019 = ORIENTED_EDGE('',*,*,#44020,.F.); +#44020 = EDGE_CURVE('',#44021,#44011,#44023,.T.); +#44021 = VERTEX_POINT('',#44022); +#44022 = CARTESIAN_POINT('',(-0.6,-8.6,5.6)); +#44023 = LINE('',#44024,#44025); +#44024 = CARTESIAN_POINT('',(-0.6,-8.6,5.6)); +#44025 = VECTOR('',#44026,1.); +#44026 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44027 = ORIENTED_EDGE('',*,*,#44028,.F.); +#44028 = EDGE_CURVE('',#44029,#44021,#44031,.T.); +#44029 = VERTEX_POINT('',#44030); +#44030 = CARTESIAN_POINT('',(-0.6,-7.4,5.6)); +#44031 = LINE('',#44032,#44033); +#44032 = CARTESIAN_POINT('',(-0.6,-7.4,5.6)); +#44033 = VECTOR('',#44034,1.); +#44034 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44035 = ORIENTED_EDGE('',*,*,#44036,.F.); +#44036 = EDGE_CURVE('',#44013,#44029,#44037,.T.); +#44037 = LINE('',#44038,#44039); +#44038 = CARTESIAN_POINT('',(0.6,-7.4,5.6)); +#44039 = VECTOR('',#44040,1.); +#44040 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44041 = FACE_BOUND('',#44042,.T.); +#44042 = EDGE_LOOP('',(#44043,#44053,#44061,#44069)); +#44043 = ORIENTED_EDGE('',*,*,#44044,.F.); +#44044 = EDGE_CURVE('',#44045,#44047,#44049,.T.); +#44045 = VERTEX_POINT('',#44046); +#44046 = CARTESIAN_POINT('',(0.6,-6.6,5.6)); +#44047 = VERTEX_POINT('',#44048); +#44048 = CARTESIAN_POINT('',(0.6,-5.4,5.6)); +#44049 = LINE('',#44050,#44051); +#44050 = CARTESIAN_POINT('',(0.6,-6.6,5.6)); +#44051 = VECTOR('',#44052,1.); +#44052 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44053 = ORIENTED_EDGE('',*,*,#44054,.F.); +#44054 = EDGE_CURVE('',#44055,#44045,#44057,.T.); +#44055 = VERTEX_POINT('',#44056); +#44056 = CARTESIAN_POINT('',(-0.6,-6.6,5.6)); +#44057 = LINE('',#44058,#44059); +#44058 = CARTESIAN_POINT('',(-0.6,-6.6,5.6)); +#44059 = VECTOR('',#44060,1.); +#44060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44061 = ORIENTED_EDGE('',*,*,#44062,.F.); +#44062 = EDGE_CURVE('',#44063,#44055,#44065,.T.); +#44063 = VERTEX_POINT('',#44064); +#44064 = CARTESIAN_POINT('',(-0.6,-5.4,5.6)); +#44065 = LINE('',#44066,#44067); +#44066 = CARTESIAN_POINT('',(-0.6,-5.4,5.6)); +#44067 = VECTOR('',#44068,1.); +#44068 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44069 = ORIENTED_EDGE('',*,*,#44070,.F.); +#44070 = EDGE_CURVE('',#44047,#44063,#44071,.T.); +#44071 = LINE('',#44072,#44073); +#44072 = CARTESIAN_POINT('',(0.6,-5.4,5.6)); +#44073 = VECTOR('',#44074,1.); +#44074 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44075 = FACE_BOUND('',#44076,.T.); +#44076 = EDGE_LOOP('',(#44077,#44087,#44095,#44103)); +#44077 = ORIENTED_EDGE('',*,*,#44078,.F.); +#44078 = EDGE_CURVE('',#44079,#44081,#44083,.T.); +#44079 = VERTEX_POINT('',#44080); +#44080 = CARTESIAN_POINT('',(0.6,-4.6,5.6)); +#44081 = VERTEX_POINT('',#44082); +#44082 = CARTESIAN_POINT('',(0.6,-3.4,5.6)); +#44083 = LINE('',#44084,#44085); +#44084 = CARTESIAN_POINT('',(0.6,-4.6,5.6)); +#44085 = VECTOR('',#44086,1.); +#44086 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44087 = ORIENTED_EDGE('',*,*,#44088,.F.); +#44088 = EDGE_CURVE('',#44089,#44079,#44091,.T.); +#44089 = VERTEX_POINT('',#44090); +#44090 = CARTESIAN_POINT('',(-0.6,-4.6,5.6)); +#44091 = LINE('',#44092,#44093); +#44092 = CARTESIAN_POINT('',(-0.6,-4.6,5.6)); +#44093 = VECTOR('',#44094,1.); +#44094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44095 = ORIENTED_EDGE('',*,*,#44096,.F.); +#44096 = EDGE_CURVE('',#44097,#44089,#44099,.T.); +#44097 = VERTEX_POINT('',#44098); +#44098 = CARTESIAN_POINT('',(-0.6,-3.4,5.6)); +#44099 = LINE('',#44100,#44101); +#44100 = CARTESIAN_POINT('',(-0.6,-3.4,5.6)); +#44101 = VECTOR('',#44102,1.); +#44102 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44103 = ORIENTED_EDGE('',*,*,#44104,.F.); +#44104 = EDGE_CURVE('',#44081,#44097,#44105,.T.); +#44105 = LINE('',#44106,#44107); +#44106 = CARTESIAN_POINT('',(0.6,-3.4,5.6)); +#44107 = VECTOR('',#44108,1.); +#44108 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44109 = FACE_BOUND('',#44110,.T.); +#44110 = EDGE_LOOP('',(#44111,#44121,#44129,#44137)); +#44111 = ORIENTED_EDGE('',*,*,#44112,.F.); +#44112 = EDGE_CURVE('',#44113,#44115,#44117,.T.); +#44113 = VERTEX_POINT('',#44114); +#44114 = CARTESIAN_POINT('',(0.6,-2.6,5.6)); +#44115 = VERTEX_POINT('',#44116); +#44116 = CARTESIAN_POINT('',(0.6,-1.4,5.6)); +#44117 = LINE('',#44118,#44119); +#44118 = CARTESIAN_POINT('',(0.6,-2.6,5.6)); +#44119 = VECTOR('',#44120,1.); +#44120 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44121 = ORIENTED_EDGE('',*,*,#44122,.F.); +#44122 = EDGE_CURVE('',#44123,#44113,#44125,.T.); +#44123 = VERTEX_POINT('',#44124); +#44124 = CARTESIAN_POINT('',(-0.6,-2.6,5.6)); +#44125 = LINE('',#44126,#44127); +#44126 = CARTESIAN_POINT('',(-0.6,-2.6,5.6)); +#44127 = VECTOR('',#44128,1.); +#44128 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44129 = ORIENTED_EDGE('',*,*,#44130,.F.); +#44130 = EDGE_CURVE('',#44131,#44123,#44133,.T.); +#44131 = VERTEX_POINT('',#44132); +#44132 = CARTESIAN_POINT('',(-0.6,-1.4,5.6)); +#44133 = LINE('',#44134,#44135); +#44134 = CARTESIAN_POINT('',(-0.6,-1.4,5.6)); +#44135 = VECTOR('',#44136,1.); +#44136 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44137 = ORIENTED_EDGE('',*,*,#44138,.F.); +#44138 = EDGE_CURVE('',#44115,#44131,#44139,.T.); +#44139 = LINE('',#44140,#44141); +#44140 = CARTESIAN_POINT('',(0.6,-1.4,5.6)); +#44141 = VECTOR('',#44142,1.); +#44142 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44143 = FACE_BOUND('',#44144,.T.); +#44144 = EDGE_LOOP('',(#44145,#44155,#44163,#44171)); +#44145 = ORIENTED_EDGE('',*,*,#44146,.F.); +#44146 = EDGE_CURVE('',#44147,#44149,#44151,.T.); +#44147 = VERTEX_POINT('',#44148); +#44148 = CARTESIAN_POINT('',(0.6,-0.6,5.6)); +#44149 = VERTEX_POINT('',#44150); +#44150 = CARTESIAN_POINT('',(0.6,0.6,5.6)); +#44151 = LINE('',#44152,#44153); +#44152 = CARTESIAN_POINT('',(0.6,-0.6,5.6)); +#44153 = VECTOR('',#44154,1.); +#44154 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44155 = ORIENTED_EDGE('',*,*,#44156,.F.); +#44156 = EDGE_CURVE('',#44157,#44147,#44159,.T.); +#44157 = VERTEX_POINT('',#44158); +#44158 = CARTESIAN_POINT('',(-0.6,-0.6,5.6)); +#44159 = LINE('',#44160,#44161); +#44160 = CARTESIAN_POINT('',(-0.6,-0.6,5.6)); +#44161 = VECTOR('',#44162,1.); +#44162 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44163 = ORIENTED_EDGE('',*,*,#44164,.F.); +#44164 = EDGE_CURVE('',#44165,#44157,#44167,.T.); +#44165 = VERTEX_POINT('',#44166); +#44166 = CARTESIAN_POINT('',(-0.6,0.6,5.6)); +#44167 = LINE('',#44168,#44169); +#44168 = CARTESIAN_POINT('',(-0.6,0.6,5.6)); +#44169 = VECTOR('',#44170,1.); +#44170 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44171 = ORIENTED_EDGE('',*,*,#44172,.F.); +#44172 = EDGE_CURVE('',#44149,#44165,#44173,.T.); +#44173 = LINE('',#44174,#44175); +#44174 = CARTESIAN_POINT('',(0.6,0.6,5.6)); +#44175 = VECTOR('',#44176,1.); +#44176 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44177 = PLANE('',#44178); +#44178 = AXIS2_PLACEMENT_3D('',#44179,#44180,#44181); +#44179 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,5.6)); +#44180 = DIRECTION('',(0.,0.,1.)); +#44181 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#44182 = ADVANCED_FACE('',(#44183),#44199,.F.); +#44183 = FACE_BOUND('',#44184,.F.); +#44184 = EDGE_LOOP('',(#44185,#44186,#44192,#44193)); +#44185 = ORIENTED_EDGE('',*,*,#43686,.T.); +#44186 = ORIENTED_EDGE('',*,*,#44187,.F.); +#44187 = EDGE_CURVE('',#43775,#43689,#44188,.T.); +#44188 = LINE('',#44189,#44190); +#44189 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#44190 = VECTOR('',#44191,1.); +#44191 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44192 = ORIENTED_EDGE('',*,*,#43774,.T.); +#44193 = ORIENTED_EDGE('',*,*,#44194,.T.); +#44194 = EDGE_CURVE('',#43767,#43687,#44195,.T.); +#44195 = LINE('',#44196,#44197); +#44196 = CARTESIAN_POINT('',(-1.,1.,0.)); +#44197 = VECTOR('',#44198,1.); +#44198 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44199 = PLANE('',#44200); +#44200 = AXIS2_PLACEMENT_3D('',#44201,#44202,#44203); +#44201 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.)); +#44202 = DIRECTION('',(0.,0.,1.)); +#44203 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#44204 = ADVANCED_FACE('',(#44205),#44216,.T.); +#44205 = FACE_BOUND('',#44206,.T.); +#44206 = EDGE_LOOP('',(#44207,#44208,#44214,#44215)); +#44207 = ORIENTED_EDGE('',*,*,#43782,.T.); +#44208 = ORIENTED_EDGE('',*,*,#44209,.T.); +#44209 = EDGE_CURVE('',#43783,#43728,#44210,.T.); +#44210 = LINE('',#44211,#44212); +#44211 = CARTESIAN_POINT('',(-0.666666666667,1.,0.2)); +#44212 = VECTOR('',#44213,1.); +#44213 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44214 = ORIENTED_EDGE('',*,*,#43735,.F.); +#44215 = ORIENTED_EDGE('',*,*,#44187,.F.); +#44216 = PLANE('',#44217); +#44217 = AXIS2_PLACEMENT_3D('',#44218,#44219,#44220); +#44218 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#44219 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44220 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44221 = ADVANCED_FACE('',(#44222,#44233,#44299,#44365,#44431,#44497, + #44563,#44629,#44695,#44761,#44827),#44893,.F.); +#44222 = FACE_BOUND('',#44223,.F.); +#44223 = EDGE_LOOP('',(#44224,#44230,#44231,#44232)); +#44224 = ORIENTED_EDGE('',*,*,#44225,.T.); +#44225 = EDGE_CURVE('',#43720,#43791,#44226,.T.); +#44226 = LINE('',#44227,#44228); +#44227 = CARTESIAN_POINT('',(0.666666666667,-19.,0.2)); +#44228 = VECTOR('',#44229,1.); +#44229 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44230 = ORIENTED_EDGE('',*,*,#43790,.T.); +#44231 = ORIENTED_EDGE('',*,*,#44209,.T.); +#44232 = ORIENTED_EDGE('',*,*,#43727,.T.); +#44233 = FACE_BOUND('',#44234,.F.); +#44234 = EDGE_LOOP('',(#44235,#44245,#44253,#44261,#44269,#44277,#44285, + #44293)); +#44235 = ORIENTED_EDGE('',*,*,#44236,.F.); +#44236 = EDGE_CURVE('',#44237,#44239,#44241,.T.); +#44237 = VERTEX_POINT('',#44238); +#44238 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44239 = VERTEX_POINT('',#44240); +#44240 = CARTESIAN_POINT('',(0.1,-18.45,0.2)); +#44241 = LINE('',#44242,#44243); +#44242 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44243 = VECTOR('',#44244,1.); +#44244 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44245 = ORIENTED_EDGE('',*,*,#44246,.T.); +#44246 = EDGE_CURVE('',#44237,#44247,#44249,.T.); +#44247 = VERTEX_POINT('',#44248); +#44248 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#44249 = LINE('',#44250,#44251); +#44250 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44251 = VECTOR('',#44252,1.); +#44252 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44253 = ORIENTED_EDGE('',*,*,#44254,.F.); +#44254 = EDGE_CURVE('',#44255,#44247,#44257,.T.); +#44255 = VERTEX_POINT('',#44256); +#44256 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#44257 = LINE('',#44258,#44259); +#44258 = CARTESIAN_POINT('',(-0.1,-13.5,0.2)); +#44259 = VECTOR('',#44260,1.); +#44260 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44261 = ORIENTED_EDGE('',*,*,#44262,.T.); +#44262 = EDGE_CURVE('',#44255,#44263,#44265,.T.); +#44263 = VERTEX_POINT('',#44264); +#44264 = CARTESIAN_POINT('',(-0.1,-17.55,0.2)); +#44265 = LINE('',#44266,#44267); +#44266 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#44267 = VECTOR('',#44268,1.); +#44268 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44269 = ORIENTED_EDGE('',*,*,#44270,.T.); +#44270 = EDGE_CURVE('',#44263,#44271,#44273,.T.); +#44271 = VERTEX_POINT('',#44272); +#44272 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#44273 = LINE('',#44274,#44275); +#44274 = CARTESIAN_POINT('',(-0.1,-17.55,0.2)); +#44275 = VECTOR('',#44276,1.); +#44276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44277 = ORIENTED_EDGE('',*,*,#44278,.T.); +#44278 = EDGE_CURVE('',#44271,#44279,#44281,.T.); +#44279 = VERTEX_POINT('',#44280); +#44280 = CARTESIAN_POINT('',(0.1,-17.7,0.2)); +#44281 = LINE('',#44282,#44283); +#44282 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#44283 = VECTOR('',#44284,1.); +#44284 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44285 = ORIENTED_EDGE('',*,*,#44286,.T.); +#44286 = EDGE_CURVE('',#44279,#44287,#44289,.T.); +#44287 = VERTEX_POINT('',#44288); +#44288 = CARTESIAN_POINT('',(0.1,-18.3,0.2)); +#44289 = LINE('',#44290,#44291); +#44290 = CARTESIAN_POINT('',(0.1,-13.5,0.2)); +#44291 = VECTOR('',#44292,1.); +#44292 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44293 = ORIENTED_EDGE('',*,*,#44294,.T.); +#44294 = EDGE_CURVE('',#44287,#44239,#44295,.T.); +#44295 = LINE('',#44296,#44297); +#44296 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#44297 = VECTOR('',#44298,1.); +#44298 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44299 = FACE_BOUND('',#44300,.F.); +#44300 = EDGE_LOOP('',(#44301,#44311,#44319,#44327,#44335,#44343,#44351, + #44359)); +#44301 = ORIENTED_EDGE('',*,*,#44302,.F.); +#44302 = EDGE_CURVE('',#44303,#44305,#44307,.T.); +#44303 = VERTEX_POINT('',#44304); +#44304 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44305 = VERTEX_POINT('',#44306); +#44306 = CARTESIAN_POINT('',(0.1,-16.45,0.2)); +#44307 = LINE('',#44308,#44309); +#44308 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44309 = VECTOR('',#44310,1.); +#44310 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44311 = ORIENTED_EDGE('',*,*,#44312,.T.); +#44312 = EDGE_CURVE('',#44303,#44313,#44315,.T.); +#44313 = VERTEX_POINT('',#44314); +#44314 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#44315 = LINE('',#44316,#44317); +#44316 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44317 = VECTOR('',#44318,1.); +#44318 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44319 = ORIENTED_EDGE('',*,*,#44320,.F.); +#44320 = EDGE_CURVE('',#44321,#44313,#44323,.T.); +#44321 = VERTEX_POINT('',#44322); +#44322 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#44323 = LINE('',#44324,#44325); +#44324 = CARTESIAN_POINT('',(-0.1,-12.5,0.2)); +#44325 = VECTOR('',#44326,1.); +#44326 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44327 = ORIENTED_EDGE('',*,*,#44328,.T.); +#44328 = EDGE_CURVE('',#44321,#44329,#44331,.T.); +#44329 = VERTEX_POINT('',#44330); +#44330 = CARTESIAN_POINT('',(-0.1,-15.55,0.2)); +#44331 = LINE('',#44332,#44333); +#44332 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#44333 = VECTOR('',#44334,1.); +#44334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44335 = ORIENTED_EDGE('',*,*,#44336,.T.); +#44336 = EDGE_CURVE('',#44329,#44337,#44339,.T.); +#44337 = VERTEX_POINT('',#44338); +#44338 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#44339 = LINE('',#44340,#44341); +#44340 = CARTESIAN_POINT('',(-0.1,-15.55,0.2)); +#44341 = VECTOR('',#44342,1.); +#44342 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44343 = ORIENTED_EDGE('',*,*,#44344,.T.); +#44344 = EDGE_CURVE('',#44337,#44345,#44347,.T.); +#44345 = VERTEX_POINT('',#44346); +#44346 = CARTESIAN_POINT('',(0.1,-15.7,0.2)); +#44347 = LINE('',#44348,#44349); +#44348 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#44349 = VECTOR('',#44350,1.); +#44350 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44351 = ORIENTED_EDGE('',*,*,#44352,.T.); +#44352 = EDGE_CURVE('',#44345,#44353,#44355,.T.); +#44353 = VERTEX_POINT('',#44354); +#44354 = CARTESIAN_POINT('',(0.1,-16.3,0.2)); +#44355 = LINE('',#44356,#44357); +#44356 = CARTESIAN_POINT('',(0.1,-12.5,0.2)); +#44357 = VECTOR('',#44358,1.); +#44358 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44359 = ORIENTED_EDGE('',*,*,#44360,.T.); +#44360 = EDGE_CURVE('',#44353,#44305,#44361,.T.); +#44361 = LINE('',#44362,#44363); +#44362 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#44363 = VECTOR('',#44364,1.); +#44364 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44365 = FACE_BOUND('',#44366,.F.); +#44366 = EDGE_LOOP('',(#44367,#44377,#44385,#44393,#44401,#44409,#44417, + #44425)); +#44367 = ORIENTED_EDGE('',*,*,#44368,.F.); +#44368 = EDGE_CURVE('',#44369,#44371,#44373,.T.); +#44369 = VERTEX_POINT('',#44370); +#44370 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44371 = VERTEX_POINT('',#44372); +#44372 = CARTESIAN_POINT('',(0.1,-14.45,0.2)); +#44373 = LINE('',#44374,#44375); +#44374 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44375 = VECTOR('',#44376,1.); +#44376 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44377 = ORIENTED_EDGE('',*,*,#44378,.T.); +#44378 = EDGE_CURVE('',#44369,#44379,#44381,.T.); +#44379 = VERTEX_POINT('',#44380); +#44380 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#44381 = LINE('',#44382,#44383); +#44382 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44383 = VECTOR('',#44384,1.); +#44384 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44385 = ORIENTED_EDGE('',*,*,#44386,.F.); +#44386 = EDGE_CURVE('',#44387,#44379,#44389,.T.); +#44387 = VERTEX_POINT('',#44388); +#44388 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#44389 = LINE('',#44390,#44391); +#44390 = CARTESIAN_POINT('',(-0.1,-11.5,0.2)); +#44391 = VECTOR('',#44392,1.); +#44392 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44393 = ORIENTED_EDGE('',*,*,#44394,.T.); +#44394 = EDGE_CURVE('',#44387,#44395,#44397,.T.); +#44395 = VERTEX_POINT('',#44396); +#44396 = CARTESIAN_POINT('',(-0.1,-13.55,0.2)); +#44397 = LINE('',#44398,#44399); +#44398 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#44399 = VECTOR('',#44400,1.); +#44400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44401 = ORIENTED_EDGE('',*,*,#44402,.T.); +#44402 = EDGE_CURVE('',#44395,#44403,#44405,.T.); +#44403 = VERTEX_POINT('',#44404); +#44404 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#44405 = LINE('',#44406,#44407); +#44406 = CARTESIAN_POINT('',(-0.1,-13.55,0.2)); +#44407 = VECTOR('',#44408,1.); +#44408 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44409 = ORIENTED_EDGE('',*,*,#44410,.T.); +#44410 = EDGE_CURVE('',#44403,#44411,#44413,.T.); +#44411 = VERTEX_POINT('',#44412); +#44412 = CARTESIAN_POINT('',(0.1,-13.7,0.2)); +#44413 = LINE('',#44414,#44415); +#44414 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#44415 = VECTOR('',#44416,1.); +#44416 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44417 = ORIENTED_EDGE('',*,*,#44418,.T.); +#44418 = EDGE_CURVE('',#44411,#44419,#44421,.T.); +#44419 = VERTEX_POINT('',#44420); +#44420 = CARTESIAN_POINT('',(0.1,-14.3,0.2)); +#44421 = LINE('',#44422,#44423); +#44422 = CARTESIAN_POINT('',(0.1,-11.5,0.2)); +#44423 = VECTOR('',#44424,1.); +#44424 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44425 = ORIENTED_EDGE('',*,*,#44426,.T.); +#44426 = EDGE_CURVE('',#44419,#44371,#44427,.T.); +#44427 = LINE('',#44428,#44429); +#44428 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#44429 = VECTOR('',#44430,1.); +#44430 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44431 = FACE_BOUND('',#44432,.F.); +#44432 = EDGE_LOOP('',(#44433,#44443,#44451,#44459,#44467,#44475,#44483, + #44491)); +#44433 = ORIENTED_EDGE('',*,*,#44434,.F.); +#44434 = EDGE_CURVE('',#44435,#44437,#44439,.T.); +#44435 = VERTEX_POINT('',#44436); +#44436 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44437 = VERTEX_POINT('',#44438); +#44438 = CARTESIAN_POINT('',(0.1,-12.45,0.2)); +#44439 = LINE('',#44440,#44441); +#44440 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44441 = VECTOR('',#44442,1.); +#44442 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44443 = ORIENTED_EDGE('',*,*,#44444,.T.); +#44444 = EDGE_CURVE('',#44435,#44445,#44447,.T.); +#44445 = VERTEX_POINT('',#44446); +#44446 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#44447 = LINE('',#44448,#44449); +#44448 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44449 = VECTOR('',#44450,1.); +#44450 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44451 = ORIENTED_EDGE('',*,*,#44452,.F.); +#44452 = EDGE_CURVE('',#44453,#44445,#44455,.T.); +#44453 = VERTEX_POINT('',#44454); +#44454 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#44455 = LINE('',#44456,#44457); +#44456 = CARTESIAN_POINT('',(-0.1,-10.5,0.2)); +#44457 = VECTOR('',#44458,1.); +#44458 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44459 = ORIENTED_EDGE('',*,*,#44460,.T.); +#44460 = EDGE_CURVE('',#44453,#44461,#44463,.T.); +#44461 = VERTEX_POINT('',#44462); +#44462 = CARTESIAN_POINT('',(-0.1,-11.55,0.2)); +#44463 = LINE('',#44464,#44465); +#44464 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#44465 = VECTOR('',#44466,1.); +#44466 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44467 = ORIENTED_EDGE('',*,*,#44468,.T.); +#44468 = EDGE_CURVE('',#44461,#44469,#44471,.T.); +#44469 = VERTEX_POINT('',#44470); +#44470 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#44471 = LINE('',#44472,#44473); +#44472 = CARTESIAN_POINT('',(-0.1,-11.55,0.2)); +#44473 = VECTOR('',#44474,1.); +#44474 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44475 = ORIENTED_EDGE('',*,*,#44476,.T.); +#44476 = EDGE_CURVE('',#44469,#44477,#44479,.T.); +#44477 = VERTEX_POINT('',#44478); +#44478 = CARTESIAN_POINT('',(0.1,-11.7,0.2)); +#44479 = LINE('',#44480,#44481); +#44480 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#44481 = VECTOR('',#44482,1.); +#44482 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44483 = ORIENTED_EDGE('',*,*,#44484,.T.); +#44484 = EDGE_CURVE('',#44477,#44485,#44487,.T.); +#44485 = VERTEX_POINT('',#44486); +#44486 = CARTESIAN_POINT('',(0.1,-12.3,0.2)); +#44487 = LINE('',#44488,#44489); +#44488 = CARTESIAN_POINT('',(0.1,-10.5,0.2)); +#44489 = VECTOR('',#44490,1.); +#44490 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44491 = ORIENTED_EDGE('',*,*,#44492,.T.); +#44492 = EDGE_CURVE('',#44485,#44437,#44493,.T.); +#44493 = LINE('',#44494,#44495); +#44494 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#44495 = VECTOR('',#44496,1.); +#44496 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44497 = FACE_BOUND('',#44498,.F.); +#44498 = EDGE_LOOP('',(#44499,#44509,#44517,#44525,#44533,#44541,#44549, + #44557)); +#44499 = ORIENTED_EDGE('',*,*,#44500,.F.); +#44500 = EDGE_CURVE('',#44501,#44503,#44505,.T.); +#44501 = VERTEX_POINT('',#44502); +#44502 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44503 = VERTEX_POINT('',#44504); +#44504 = CARTESIAN_POINT('',(0.1,-10.45,0.2)); +#44505 = LINE('',#44506,#44507); +#44506 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44507 = VECTOR('',#44508,1.); +#44508 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44509 = ORIENTED_EDGE('',*,*,#44510,.T.); +#44510 = EDGE_CURVE('',#44501,#44511,#44513,.T.); +#44511 = VERTEX_POINT('',#44512); +#44512 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#44513 = LINE('',#44514,#44515); +#44514 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44515 = VECTOR('',#44516,1.); +#44516 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44517 = ORIENTED_EDGE('',*,*,#44518,.F.); +#44518 = EDGE_CURVE('',#44519,#44511,#44521,.T.); +#44519 = VERTEX_POINT('',#44520); +#44520 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#44521 = LINE('',#44522,#44523); +#44522 = CARTESIAN_POINT('',(-0.1,-9.5,0.2)); +#44523 = VECTOR('',#44524,1.); +#44524 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44525 = ORIENTED_EDGE('',*,*,#44526,.T.); +#44526 = EDGE_CURVE('',#44519,#44527,#44529,.T.); +#44527 = VERTEX_POINT('',#44528); +#44528 = CARTESIAN_POINT('',(-0.1,-9.55,0.2)); +#44529 = LINE('',#44530,#44531); +#44530 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#44531 = VECTOR('',#44532,1.); +#44532 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44533 = ORIENTED_EDGE('',*,*,#44534,.T.); +#44534 = EDGE_CURVE('',#44527,#44535,#44537,.T.); +#44535 = VERTEX_POINT('',#44536); +#44536 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#44537 = LINE('',#44538,#44539); +#44538 = CARTESIAN_POINT('',(-0.1,-9.55,0.2)); +#44539 = VECTOR('',#44540,1.); +#44540 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44541 = ORIENTED_EDGE('',*,*,#44542,.T.); +#44542 = EDGE_CURVE('',#44535,#44543,#44545,.T.); +#44543 = VERTEX_POINT('',#44544); +#44544 = CARTESIAN_POINT('',(0.1,-9.7,0.2)); +#44545 = LINE('',#44546,#44547); +#44546 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#44547 = VECTOR('',#44548,1.); +#44548 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44549 = ORIENTED_EDGE('',*,*,#44550,.T.); +#44550 = EDGE_CURVE('',#44543,#44551,#44553,.T.); +#44551 = VERTEX_POINT('',#44552); +#44552 = CARTESIAN_POINT('',(0.1,-10.3,0.2)); +#44553 = LINE('',#44554,#44555); +#44554 = CARTESIAN_POINT('',(0.1,-9.5,0.2)); +#44555 = VECTOR('',#44556,1.); +#44556 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44557 = ORIENTED_EDGE('',*,*,#44558,.T.); +#44558 = EDGE_CURVE('',#44551,#44503,#44559,.T.); +#44559 = LINE('',#44560,#44561); +#44560 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#44561 = VECTOR('',#44562,1.); +#44562 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44563 = FACE_BOUND('',#44564,.F.); +#44564 = EDGE_LOOP('',(#44565,#44575,#44583,#44591,#44599,#44607,#44615, + #44623)); +#44565 = ORIENTED_EDGE('',*,*,#44566,.F.); +#44566 = EDGE_CURVE('',#44567,#44569,#44571,.T.); +#44567 = VERTEX_POINT('',#44568); +#44568 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44569 = VERTEX_POINT('',#44570); +#44570 = CARTESIAN_POINT('',(0.1,-8.45,0.2)); +#44571 = LINE('',#44572,#44573); +#44572 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44573 = VECTOR('',#44574,1.); +#44574 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44575 = ORIENTED_EDGE('',*,*,#44576,.T.); +#44576 = EDGE_CURVE('',#44567,#44577,#44579,.T.); +#44577 = VERTEX_POINT('',#44578); +#44578 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#44579 = LINE('',#44580,#44581); +#44580 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44581 = VECTOR('',#44582,1.); +#44582 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44583 = ORIENTED_EDGE('',*,*,#44584,.F.); +#44584 = EDGE_CURVE('',#44585,#44577,#44587,.T.); +#44585 = VERTEX_POINT('',#44586); +#44586 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#44587 = LINE('',#44588,#44589); +#44588 = CARTESIAN_POINT('',(-0.1,-8.5,0.2)); +#44589 = VECTOR('',#44590,1.); +#44590 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44591 = ORIENTED_EDGE('',*,*,#44592,.T.); +#44592 = EDGE_CURVE('',#44585,#44593,#44595,.T.); +#44593 = VERTEX_POINT('',#44594); +#44594 = CARTESIAN_POINT('',(-0.1,-7.55,0.2)); +#44595 = LINE('',#44596,#44597); +#44596 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#44597 = VECTOR('',#44598,1.); +#44598 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44599 = ORIENTED_EDGE('',*,*,#44600,.T.); +#44600 = EDGE_CURVE('',#44593,#44601,#44603,.T.); +#44601 = VERTEX_POINT('',#44602); +#44602 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#44603 = LINE('',#44604,#44605); +#44604 = CARTESIAN_POINT('',(-0.1,-7.55,0.2)); +#44605 = VECTOR('',#44606,1.); +#44606 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44607 = ORIENTED_EDGE('',*,*,#44608,.T.); +#44608 = EDGE_CURVE('',#44601,#44609,#44611,.T.); +#44609 = VERTEX_POINT('',#44610); +#44610 = CARTESIAN_POINT('',(0.1,-7.7,0.2)); +#44611 = LINE('',#44612,#44613); +#44612 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#44613 = VECTOR('',#44614,1.); +#44614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44615 = ORIENTED_EDGE('',*,*,#44616,.T.); +#44616 = EDGE_CURVE('',#44609,#44617,#44619,.T.); +#44617 = VERTEX_POINT('',#44618); +#44618 = CARTESIAN_POINT('',(0.1,-8.3,0.2)); +#44619 = LINE('',#44620,#44621); +#44620 = CARTESIAN_POINT('',(0.1,-8.5,0.2)); +#44621 = VECTOR('',#44622,1.); +#44622 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44623 = ORIENTED_EDGE('',*,*,#44624,.T.); +#44624 = EDGE_CURVE('',#44617,#44569,#44625,.T.); +#44625 = LINE('',#44626,#44627); +#44626 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#44627 = VECTOR('',#44628,1.); +#44628 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44629 = FACE_BOUND('',#44630,.F.); +#44630 = EDGE_LOOP('',(#44631,#44641,#44649,#44657,#44665,#44673,#44681, + #44689)); +#44631 = ORIENTED_EDGE('',*,*,#44632,.F.); +#44632 = EDGE_CURVE('',#44633,#44635,#44637,.T.); +#44633 = VERTEX_POINT('',#44634); +#44634 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44635 = VERTEX_POINT('',#44636); +#44636 = CARTESIAN_POINT('',(0.1,-6.45,0.2)); +#44637 = LINE('',#44638,#44639); +#44638 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44639 = VECTOR('',#44640,1.); +#44640 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44641 = ORIENTED_EDGE('',*,*,#44642,.T.); +#44642 = EDGE_CURVE('',#44633,#44643,#44645,.T.); +#44643 = VERTEX_POINT('',#44644); +#44644 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#44645 = LINE('',#44646,#44647); +#44646 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44647 = VECTOR('',#44648,1.); +#44648 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44649 = ORIENTED_EDGE('',*,*,#44650,.F.); +#44650 = EDGE_CURVE('',#44651,#44643,#44653,.T.); +#44651 = VERTEX_POINT('',#44652); +#44652 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#44653 = LINE('',#44654,#44655); +#44654 = CARTESIAN_POINT('',(-0.1,-7.5,0.2)); +#44655 = VECTOR('',#44656,1.); +#44656 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44657 = ORIENTED_EDGE('',*,*,#44658,.T.); +#44658 = EDGE_CURVE('',#44651,#44659,#44661,.T.); +#44659 = VERTEX_POINT('',#44660); +#44660 = CARTESIAN_POINT('',(-0.1,-5.55,0.2)); +#44661 = LINE('',#44662,#44663); +#44662 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#44663 = VECTOR('',#44664,1.); +#44664 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44665 = ORIENTED_EDGE('',*,*,#44666,.T.); +#44666 = EDGE_CURVE('',#44659,#44667,#44669,.T.); +#44667 = VERTEX_POINT('',#44668); +#44668 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#44669 = LINE('',#44670,#44671); +#44670 = CARTESIAN_POINT('',(-0.1,-5.55,0.2)); +#44671 = VECTOR('',#44672,1.); +#44672 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44673 = ORIENTED_EDGE('',*,*,#44674,.T.); +#44674 = EDGE_CURVE('',#44667,#44675,#44677,.T.); +#44675 = VERTEX_POINT('',#44676); +#44676 = CARTESIAN_POINT('',(0.1,-5.7,0.2)); +#44677 = LINE('',#44678,#44679); +#44678 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#44679 = VECTOR('',#44680,1.); +#44680 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44681 = ORIENTED_EDGE('',*,*,#44682,.T.); +#44682 = EDGE_CURVE('',#44675,#44683,#44685,.T.); +#44683 = VERTEX_POINT('',#44684); +#44684 = CARTESIAN_POINT('',(0.1,-6.3,0.2)); +#44685 = LINE('',#44686,#44687); +#44686 = CARTESIAN_POINT('',(0.1,-7.5,0.2)); +#44687 = VECTOR('',#44688,1.); +#44688 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44689 = ORIENTED_EDGE('',*,*,#44690,.T.); +#44690 = EDGE_CURVE('',#44683,#44635,#44691,.T.); +#44691 = LINE('',#44692,#44693); +#44692 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#44693 = VECTOR('',#44694,1.); +#44694 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44695 = FACE_BOUND('',#44696,.F.); +#44696 = EDGE_LOOP('',(#44697,#44707,#44715,#44723,#44731,#44739,#44747, + #44755)); +#44697 = ORIENTED_EDGE('',*,*,#44698,.F.); +#44698 = EDGE_CURVE('',#44699,#44701,#44703,.T.); +#44699 = VERTEX_POINT('',#44700); +#44700 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44701 = VERTEX_POINT('',#44702); +#44702 = CARTESIAN_POINT('',(0.1,-4.45,0.2)); +#44703 = LINE('',#44704,#44705); +#44704 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44705 = VECTOR('',#44706,1.); +#44706 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44707 = ORIENTED_EDGE('',*,*,#44708,.T.); +#44708 = EDGE_CURVE('',#44699,#44709,#44711,.T.); +#44709 = VERTEX_POINT('',#44710); +#44710 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#44711 = LINE('',#44712,#44713); +#44712 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44713 = VECTOR('',#44714,1.); +#44714 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44715 = ORIENTED_EDGE('',*,*,#44716,.F.); +#44716 = EDGE_CURVE('',#44717,#44709,#44719,.T.); +#44717 = VERTEX_POINT('',#44718); +#44718 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#44719 = LINE('',#44720,#44721); +#44720 = CARTESIAN_POINT('',(-0.1,-6.5,0.2)); +#44721 = VECTOR('',#44722,1.); +#44722 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44723 = ORIENTED_EDGE('',*,*,#44724,.T.); +#44724 = EDGE_CURVE('',#44717,#44725,#44727,.T.); +#44725 = VERTEX_POINT('',#44726); +#44726 = CARTESIAN_POINT('',(-0.1,-3.55,0.2)); +#44727 = LINE('',#44728,#44729); +#44728 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#44729 = VECTOR('',#44730,1.); +#44730 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44731 = ORIENTED_EDGE('',*,*,#44732,.T.); +#44732 = EDGE_CURVE('',#44725,#44733,#44735,.T.); +#44733 = VERTEX_POINT('',#44734); +#44734 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#44735 = LINE('',#44736,#44737); +#44736 = CARTESIAN_POINT('',(-0.1,-3.55,0.2)); +#44737 = VECTOR('',#44738,1.); +#44738 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44739 = ORIENTED_EDGE('',*,*,#44740,.T.); +#44740 = EDGE_CURVE('',#44733,#44741,#44743,.T.); +#44741 = VERTEX_POINT('',#44742); +#44742 = CARTESIAN_POINT('',(0.1,-3.7,0.2)); +#44743 = LINE('',#44744,#44745); +#44744 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#44745 = VECTOR('',#44746,1.); +#44746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44747 = ORIENTED_EDGE('',*,*,#44748,.T.); +#44748 = EDGE_CURVE('',#44741,#44749,#44751,.T.); +#44749 = VERTEX_POINT('',#44750); +#44750 = CARTESIAN_POINT('',(0.1,-4.3,0.2)); +#44751 = LINE('',#44752,#44753); +#44752 = CARTESIAN_POINT('',(0.1,-6.5,0.2)); +#44753 = VECTOR('',#44754,1.); +#44754 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44755 = ORIENTED_EDGE('',*,*,#44756,.T.); +#44756 = EDGE_CURVE('',#44749,#44701,#44757,.T.); +#44757 = LINE('',#44758,#44759); +#44758 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#44759 = VECTOR('',#44760,1.); +#44760 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44761 = FACE_BOUND('',#44762,.F.); +#44762 = EDGE_LOOP('',(#44763,#44773,#44781,#44789,#44797,#44805,#44813, + #44821)); +#44763 = ORIENTED_EDGE('',*,*,#44764,.F.); +#44764 = EDGE_CURVE('',#44765,#44767,#44769,.T.); +#44765 = VERTEX_POINT('',#44766); +#44766 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44767 = VERTEX_POINT('',#44768); +#44768 = CARTESIAN_POINT('',(0.1,-2.45,0.2)); +#44769 = LINE('',#44770,#44771); +#44770 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44771 = VECTOR('',#44772,1.); +#44772 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44773 = ORIENTED_EDGE('',*,*,#44774,.T.); +#44774 = EDGE_CURVE('',#44765,#44775,#44777,.T.); +#44775 = VERTEX_POINT('',#44776); +#44776 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#44777 = LINE('',#44778,#44779); +#44778 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44779 = VECTOR('',#44780,1.); +#44780 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44781 = ORIENTED_EDGE('',*,*,#44782,.F.); +#44782 = EDGE_CURVE('',#44783,#44775,#44785,.T.); +#44783 = VERTEX_POINT('',#44784); +#44784 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#44785 = LINE('',#44786,#44787); +#44786 = CARTESIAN_POINT('',(-0.1,-5.5,0.2)); +#44787 = VECTOR('',#44788,1.); +#44788 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44789 = ORIENTED_EDGE('',*,*,#44790,.T.); +#44790 = EDGE_CURVE('',#44783,#44791,#44793,.T.); +#44791 = VERTEX_POINT('',#44792); +#44792 = CARTESIAN_POINT('',(-0.1,-1.55,0.2)); +#44793 = LINE('',#44794,#44795); +#44794 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#44795 = VECTOR('',#44796,1.); +#44796 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44797 = ORIENTED_EDGE('',*,*,#44798,.T.); +#44798 = EDGE_CURVE('',#44791,#44799,#44801,.T.); +#44799 = VERTEX_POINT('',#44800); +#44800 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#44801 = LINE('',#44802,#44803); +#44802 = CARTESIAN_POINT('',(-0.1,-1.55,0.2)); +#44803 = VECTOR('',#44804,1.); +#44804 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44805 = ORIENTED_EDGE('',*,*,#44806,.T.); +#44806 = EDGE_CURVE('',#44799,#44807,#44809,.T.); +#44807 = VERTEX_POINT('',#44808); +#44808 = CARTESIAN_POINT('',(0.1,-1.7,0.2)); +#44809 = LINE('',#44810,#44811); +#44810 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#44811 = VECTOR('',#44812,1.); +#44812 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44813 = ORIENTED_EDGE('',*,*,#44814,.T.); +#44814 = EDGE_CURVE('',#44807,#44815,#44817,.T.); +#44815 = VERTEX_POINT('',#44816); +#44816 = CARTESIAN_POINT('',(0.1,-2.3,0.2)); +#44817 = LINE('',#44818,#44819); +#44818 = CARTESIAN_POINT('',(0.1,-5.5,0.2)); +#44819 = VECTOR('',#44820,1.); +#44820 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44821 = ORIENTED_EDGE('',*,*,#44822,.T.); +#44822 = EDGE_CURVE('',#44815,#44767,#44823,.T.); +#44823 = LINE('',#44824,#44825); +#44824 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#44825 = VECTOR('',#44826,1.); +#44826 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44827 = FACE_BOUND('',#44828,.F.); +#44828 = EDGE_LOOP('',(#44829,#44839,#44847,#44855,#44863,#44871,#44879, + #44887)); +#44829 = ORIENTED_EDGE('',*,*,#44830,.F.); +#44830 = EDGE_CURVE('',#44831,#44833,#44835,.T.); +#44831 = VERTEX_POINT('',#44832); +#44832 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44833 = VERTEX_POINT('',#44834); +#44834 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#44835 = LINE('',#44836,#44837); +#44836 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44837 = VECTOR('',#44838,1.); +#44838 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44839 = ORIENTED_EDGE('',*,*,#44840,.T.); +#44840 = EDGE_CURVE('',#44831,#44841,#44843,.T.); +#44841 = VERTEX_POINT('',#44842); +#44842 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#44843 = LINE('',#44844,#44845); +#44844 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44845 = VECTOR('',#44846,1.); +#44846 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44847 = ORIENTED_EDGE('',*,*,#44848,.F.); +#44848 = EDGE_CURVE('',#44849,#44841,#44851,.T.); +#44849 = VERTEX_POINT('',#44850); +#44850 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#44851 = LINE('',#44852,#44853); +#44852 = CARTESIAN_POINT('',(-0.1,-4.5,0.2)); +#44853 = VECTOR('',#44854,1.); +#44854 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44855 = ORIENTED_EDGE('',*,*,#44856,.T.); +#44856 = EDGE_CURVE('',#44849,#44857,#44859,.T.); +#44857 = VERTEX_POINT('',#44858); +#44858 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#44859 = LINE('',#44860,#44861); +#44860 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#44861 = VECTOR('',#44862,1.); +#44862 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44863 = ORIENTED_EDGE('',*,*,#44864,.T.); +#44864 = EDGE_CURVE('',#44857,#44865,#44867,.T.); +#44865 = VERTEX_POINT('',#44866); +#44866 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#44867 = LINE('',#44868,#44869); +#44868 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#44869 = VECTOR('',#44870,1.); +#44870 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44871 = ORIENTED_EDGE('',*,*,#44872,.T.); +#44872 = EDGE_CURVE('',#44865,#44873,#44875,.T.); +#44873 = VERTEX_POINT('',#44874); +#44874 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#44875 = LINE('',#44876,#44877); +#44876 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#44877 = VECTOR('',#44878,1.); +#44878 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44879 = ORIENTED_EDGE('',*,*,#44880,.T.); +#44880 = EDGE_CURVE('',#44873,#44881,#44883,.T.); +#44881 = VERTEX_POINT('',#44882); +#44882 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#44883 = LINE('',#44884,#44885); +#44884 = CARTESIAN_POINT('',(0.1,-4.5,0.2)); +#44885 = VECTOR('',#44886,1.); +#44886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44887 = ORIENTED_EDGE('',*,*,#44888,.T.); +#44888 = EDGE_CURVE('',#44881,#44833,#44889,.T.); +#44889 = LINE('',#44890,#44891); +#44890 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#44891 = VECTOR('',#44892,1.); +#44892 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44893 = PLANE('',#44894); +#44894 = AXIS2_PLACEMENT_3D('',#44895,#44896,#44897); +#44895 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.2)); +#44896 = DIRECTION('',(0.,0.,1.)); +#44897 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#44898 = ADVANCED_FACE('',(#44899),#44905,.T.); +#44899 = FACE_BOUND('',#44900,.T.); +#44900 = EDGE_LOOP('',(#44901,#44902,#44903,#44904)); +#44901 = ORIENTED_EDGE('',*,*,#43719,.T.); +#44902 = ORIENTED_EDGE('',*,*,#44225,.T.); +#44903 = ORIENTED_EDGE('',*,*,#43798,.F.); +#44904 = ORIENTED_EDGE('',*,*,#43815,.F.); +#44905 = PLANE('',#44906); +#44906 = AXIS2_PLACEMENT_3D('',#44907,#44908,#44909); +#44907 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#44908 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44909 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44910 = ADVANCED_FACE('',(#44911),#44917,.F.); +#44911 = FACE_BOUND('',#44912,.F.); +#44912 = EDGE_LOOP('',(#44913,#44914,#44915,#44916)); +#44913 = ORIENTED_EDGE('',*,*,#43766,.T.); +#44914 = ORIENTED_EDGE('',*,*,#43831,.T.); +#44915 = ORIENTED_EDGE('',*,*,#43696,.F.); +#44916 = ORIENTED_EDGE('',*,*,#44194,.F.); +#44917 = PLANE('',#44918); +#44918 = AXIS2_PLACEMENT_3D('',#44919,#44920,#44921); +#44919 = CARTESIAN_POINT('',(-1.,1.,0.)); +#44920 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#44921 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44922 = ADVANCED_FACE('',(#44923),#44948,.T.); +#44923 = FACE_BOUND('',#44924,.T.); +#44924 = EDGE_LOOP('',(#44925,#44933,#44934,#44942)); +#44925 = ORIENTED_EDGE('',*,*,#44926,.F.); +#44926 = EDGE_CURVE('',#43841,#44927,#44929,.T.); +#44927 = VERTEX_POINT('',#44928); +#44928 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#44929 = LINE('',#44930,#44931); +#44930 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#44931 = VECTOR('',#44932,1.); +#44932 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#44933 = ORIENTED_EDGE('',*,*,#43840,.T.); +#44934 = ORIENTED_EDGE('',*,*,#44935,.T.); +#44935 = EDGE_CURVE('',#43843,#44936,#44938,.T.); +#44936 = VERTEX_POINT('',#44937); +#44937 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#44938 = LINE('',#44939,#44940); +#44939 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#44940 = VECTOR('',#44941,1.); +#44941 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#44942 = ORIENTED_EDGE('',*,*,#44943,.F.); +#44943 = EDGE_CURVE('',#44927,#44936,#44944,.T.); +#44944 = LINE('',#44945,#44946); +#44945 = CARTESIAN_POINT('',(0.3,-18.6,5.3)); +#44946 = VECTOR('',#44947,1.); +#44947 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#44948 = PLANE('',#44949); +#44949 = AXIS2_PLACEMENT_3D('',#44950,#44951,#44952); +#44950 = CARTESIAN_POINT('',(0.45,-18.6,5.45)); +#44951 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#44952 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#44953 = ADVANCED_FACE('',(#44954),#44972,.T.); +#44954 = FACE_BOUND('',#44955,.T.); +#44955 = EDGE_LOOP('',(#44956,#44957,#44958,#44966)); +#44956 = ORIENTED_EDGE('',*,*,#44935,.F.); +#44957 = ORIENTED_EDGE('',*,*,#43866,.T.); +#44958 = ORIENTED_EDGE('',*,*,#44959,.T.); +#44959 = EDGE_CURVE('',#43859,#44960,#44962,.T.); +#44960 = VERTEX_POINT('',#44961); +#44961 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#44962 = LINE('',#44963,#44964); +#44963 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#44964 = VECTOR('',#44965,1.); +#44965 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#44966 = ORIENTED_EDGE('',*,*,#44967,.F.); +#44967 = EDGE_CURVE('',#44936,#44960,#44968,.T.); +#44968 = LINE('',#44969,#44970); +#44969 = CARTESIAN_POINT('',(0.6,-17.7,5.3)); +#44970 = VECTOR('',#44971,1.); +#44971 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#44972 = PLANE('',#44973); +#44973 = AXIS2_PLACEMENT_3D('',#44974,#44975,#44976); +#44974 = CARTESIAN_POINT('',(0.6,-17.55,5.45)); +#44975 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#44976 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#44977 = ADVANCED_FACE('',(#44978),#44996,.T.); +#44978 = FACE_BOUND('',#44979,.T.); +#44979 = EDGE_LOOP('',(#44980,#44981,#44982,#44990)); +#44980 = ORIENTED_EDGE('',*,*,#44959,.F.); +#44981 = ORIENTED_EDGE('',*,*,#43858,.T.); +#44982 = ORIENTED_EDGE('',*,*,#44983,.T.); +#44983 = EDGE_CURVE('',#43851,#44984,#44986,.T.); +#44984 = VERTEX_POINT('',#44985); +#44985 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#44986 = LINE('',#44987,#44988); +#44987 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#44988 = VECTOR('',#44989,1.); +#44989 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#44990 = ORIENTED_EDGE('',*,*,#44991,.F.); +#44991 = EDGE_CURVE('',#44960,#44984,#44992,.T.); +#44992 = LINE('',#44993,#44994); +#44993 = CARTESIAN_POINT('',(-0.3,-17.4,5.3)); +#44994 = VECTOR('',#44995,1.); +#44995 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#44996 = PLANE('',#44997); +#44997 = AXIS2_PLACEMENT_3D('',#44998,#44999,#45000); +#44998 = CARTESIAN_POINT('',(-0.45,-17.4,5.45)); +#44999 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45000 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45001 = ADVANCED_FACE('',(#45002),#45013,.T.); +#45002 = FACE_BOUND('',#45003,.T.); +#45003 = EDGE_LOOP('',(#45004,#45005,#45006,#45007)); +#45004 = ORIENTED_EDGE('',*,*,#44983,.F.); +#45005 = ORIENTED_EDGE('',*,*,#43850,.T.); +#45006 = ORIENTED_EDGE('',*,*,#44926,.T.); +#45007 = ORIENTED_EDGE('',*,*,#45008,.F.); +#45008 = EDGE_CURVE('',#44984,#44927,#45009,.T.); +#45009 = LINE('',#45010,#45011); +#45010 = CARTESIAN_POINT('',(-0.6,-18.3,5.3)); +#45011 = VECTOR('',#45012,1.); +#45012 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45013 = PLANE('',#45014); +#45014 = AXIS2_PLACEMENT_3D('',#45015,#45016,#45017); +#45015 = CARTESIAN_POINT('',(-0.6,-18.45,5.45)); +#45016 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45017 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45018 = ADVANCED_FACE('',(#45019),#45044,.T.); +#45019 = FACE_BOUND('',#45020,.T.); +#45020 = EDGE_LOOP('',(#45021,#45029,#45030,#45038)); +#45021 = ORIENTED_EDGE('',*,*,#45022,.F.); +#45022 = EDGE_CURVE('',#43875,#45023,#45025,.T.); +#45023 = VERTEX_POINT('',#45024); +#45024 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#45025 = LINE('',#45026,#45027); +#45026 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#45027 = VECTOR('',#45028,1.); +#45028 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45029 = ORIENTED_EDGE('',*,*,#43874,.T.); +#45030 = ORIENTED_EDGE('',*,*,#45031,.T.); +#45031 = EDGE_CURVE('',#43877,#45032,#45034,.T.); +#45032 = VERTEX_POINT('',#45033); +#45033 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#45034 = LINE('',#45035,#45036); +#45035 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#45036 = VECTOR('',#45037,1.); +#45037 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45038 = ORIENTED_EDGE('',*,*,#45039,.F.); +#45039 = EDGE_CURVE('',#45023,#45032,#45040,.T.); +#45040 = LINE('',#45041,#45042); +#45041 = CARTESIAN_POINT('',(0.3,-16.6,5.3)); +#45042 = VECTOR('',#45043,1.); +#45043 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45044 = PLANE('',#45045); +#45045 = AXIS2_PLACEMENT_3D('',#45046,#45047,#45048); +#45046 = CARTESIAN_POINT('',(0.45,-16.6,5.45)); +#45047 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45048 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45049 = ADVANCED_FACE('',(#45050),#45068,.T.); +#45050 = FACE_BOUND('',#45051,.T.); +#45051 = EDGE_LOOP('',(#45052,#45053,#45054,#45062)); +#45052 = ORIENTED_EDGE('',*,*,#45031,.F.); +#45053 = ORIENTED_EDGE('',*,*,#43900,.T.); +#45054 = ORIENTED_EDGE('',*,*,#45055,.T.); +#45055 = EDGE_CURVE('',#43893,#45056,#45058,.T.); +#45056 = VERTEX_POINT('',#45057); +#45057 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#45058 = LINE('',#45059,#45060); +#45059 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#45060 = VECTOR('',#45061,1.); +#45061 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45062 = ORIENTED_EDGE('',*,*,#45063,.F.); +#45063 = EDGE_CURVE('',#45032,#45056,#45064,.T.); +#45064 = LINE('',#45065,#45066); +#45065 = CARTESIAN_POINT('',(0.6,-15.7,5.3)); +#45066 = VECTOR('',#45067,1.); +#45067 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45068 = PLANE('',#45069); +#45069 = AXIS2_PLACEMENT_3D('',#45070,#45071,#45072); +#45070 = CARTESIAN_POINT('',(0.6,-15.55,5.45)); +#45071 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45072 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45073 = ADVANCED_FACE('',(#45074),#45092,.T.); +#45074 = FACE_BOUND('',#45075,.T.); +#45075 = EDGE_LOOP('',(#45076,#45077,#45078,#45086)); +#45076 = ORIENTED_EDGE('',*,*,#45055,.F.); +#45077 = ORIENTED_EDGE('',*,*,#43892,.T.); +#45078 = ORIENTED_EDGE('',*,*,#45079,.T.); +#45079 = EDGE_CURVE('',#43885,#45080,#45082,.T.); +#45080 = VERTEX_POINT('',#45081); +#45081 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#45082 = LINE('',#45083,#45084); +#45083 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#45084 = VECTOR('',#45085,1.); +#45085 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45086 = ORIENTED_EDGE('',*,*,#45087,.F.); +#45087 = EDGE_CURVE('',#45056,#45080,#45088,.T.); +#45088 = LINE('',#45089,#45090); +#45089 = CARTESIAN_POINT('',(-0.3,-15.4,5.3)); +#45090 = VECTOR('',#45091,1.); +#45091 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45092 = PLANE('',#45093); +#45093 = AXIS2_PLACEMENT_3D('',#45094,#45095,#45096); +#45094 = CARTESIAN_POINT('',(-0.45,-15.4,5.45)); +#45095 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45096 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45097 = ADVANCED_FACE('',(#45098),#45109,.T.); +#45098 = FACE_BOUND('',#45099,.T.); +#45099 = EDGE_LOOP('',(#45100,#45101,#45102,#45103)); +#45100 = ORIENTED_EDGE('',*,*,#45079,.F.); +#45101 = ORIENTED_EDGE('',*,*,#43884,.T.); +#45102 = ORIENTED_EDGE('',*,*,#45022,.T.); +#45103 = ORIENTED_EDGE('',*,*,#45104,.F.); +#45104 = EDGE_CURVE('',#45080,#45023,#45105,.T.); +#45105 = LINE('',#45106,#45107); +#45106 = CARTESIAN_POINT('',(-0.6,-16.3,5.3)); +#45107 = VECTOR('',#45108,1.); +#45108 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45109 = PLANE('',#45110); +#45110 = AXIS2_PLACEMENT_3D('',#45111,#45112,#45113); +#45111 = CARTESIAN_POINT('',(-0.6,-16.45,5.45)); +#45112 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45113 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45114 = ADVANCED_FACE('',(#45115),#45140,.T.); +#45115 = FACE_BOUND('',#45116,.T.); +#45116 = EDGE_LOOP('',(#45117,#45125,#45126,#45134)); +#45117 = ORIENTED_EDGE('',*,*,#45118,.F.); +#45118 = EDGE_CURVE('',#43909,#45119,#45121,.T.); +#45119 = VERTEX_POINT('',#45120); +#45120 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#45121 = LINE('',#45122,#45123); +#45122 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#45123 = VECTOR('',#45124,1.); +#45124 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45125 = ORIENTED_EDGE('',*,*,#43908,.T.); +#45126 = ORIENTED_EDGE('',*,*,#45127,.T.); +#45127 = EDGE_CURVE('',#43911,#45128,#45130,.T.); +#45128 = VERTEX_POINT('',#45129); +#45129 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#45130 = LINE('',#45131,#45132); +#45131 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#45132 = VECTOR('',#45133,1.); +#45133 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45134 = ORIENTED_EDGE('',*,*,#45135,.F.); +#45135 = EDGE_CURVE('',#45119,#45128,#45136,.T.); +#45136 = LINE('',#45137,#45138); +#45137 = CARTESIAN_POINT('',(0.3,-14.6,5.3)); +#45138 = VECTOR('',#45139,1.); +#45139 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45140 = PLANE('',#45141); +#45141 = AXIS2_PLACEMENT_3D('',#45142,#45143,#45144); +#45142 = CARTESIAN_POINT('',(0.45,-14.6,5.45)); +#45143 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45144 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45145 = ADVANCED_FACE('',(#45146),#45164,.T.); +#45146 = FACE_BOUND('',#45147,.T.); +#45147 = EDGE_LOOP('',(#45148,#45149,#45150,#45158)); +#45148 = ORIENTED_EDGE('',*,*,#45127,.F.); +#45149 = ORIENTED_EDGE('',*,*,#43934,.T.); +#45150 = ORIENTED_EDGE('',*,*,#45151,.T.); +#45151 = EDGE_CURVE('',#43927,#45152,#45154,.T.); +#45152 = VERTEX_POINT('',#45153); +#45153 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#45154 = LINE('',#45155,#45156); +#45155 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#45156 = VECTOR('',#45157,1.); +#45157 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45158 = ORIENTED_EDGE('',*,*,#45159,.F.); +#45159 = EDGE_CURVE('',#45128,#45152,#45160,.T.); +#45160 = LINE('',#45161,#45162); +#45161 = CARTESIAN_POINT('',(0.6,-13.7,5.3)); +#45162 = VECTOR('',#45163,1.); +#45163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45164 = PLANE('',#45165); +#45165 = AXIS2_PLACEMENT_3D('',#45166,#45167,#45168); +#45166 = CARTESIAN_POINT('',(0.6,-13.55,5.45)); +#45167 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45168 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45169 = ADVANCED_FACE('',(#45170),#45188,.T.); +#45170 = FACE_BOUND('',#45171,.T.); +#45171 = EDGE_LOOP('',(#45172,#45173,#45174,#45182)); +#45172 = ORIENTED_EDGE('',*,*,#45151,.F.); +#45173 = ORIENTED_EDGE('',*,*,#43926,.T.); +#45174 = ORIENTED_EDGE('',*,*,#45175,.T.); +#45175 = EDGE_CURVE('',#43919,#45176,#45178,.T.); +#45176 = VERTEX_POINT('',#45177); +#45177 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#45178 = LINE('',#45179,#45180); +#45179 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#45180 = VECTOR('',#45181,1.); +#45181 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45182 = ORIENTED_EDGE('',*,*,#45183,.F.); +#45183 = EDGE_CURVE('',#45152,#45176,#45184,.T.); +#45184 = LINE('',#45185,#45186); +#45185 = CARTESIAN_POINT('',(-0.3,-13.4,5.3)); +#45186 = VECTOR('',#45187,1.); +#45187 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45188 = PLANE('',#45189); +#45189 = AXIS2_PLACEMENT_3D('',#45190,#45191,#45192); +#45190 = CARTESIAN_POINT('',(-0.45,-13.4,5.45)); +#45191 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45192 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45193 = ADVANCED_FACE('',(#45194),#45205,.T.); +#45194 = FACE_BOUND('',#45195,.T.); +#45195 = EDGE_LOOP('',(#45196,#45197,#45198,#45199)); +#45196 = ORIENTED_EDGE('',*,*,#45175,.F.); +#45197 = ORIENTED_EDGE('',*,*,#43918,.T.); +#45198 = ORIENTED_EDGE('',*,*,#45118,.T.); +#45199 = ORIENTED_EDGE('',*,*,#45200,.F.); +#45200 = EDGE_CURVE('',#45176,#45119,#45201,.T.); +#45201 = LINE('',#45202,#45203); +#45202 = CARTESIAN_POINT('',(-0.6,-14.3,5.3)); +#45203 = VECTOR('',#45204,1.); +#45204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45205 = PLANE('',#45206); +#45206 = AXIS2_PLACEMENT_3D('',#45207,#45208,#45209); +#45207 = CARTESIAN_POINT('',(-0.6,-14.45,5.45)); +#45208 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45209 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45210 = ADVANCED_FACE('',(#45211),#45236,.T.); +#45211 = FACE_BOUND('',#45212,.T.); +#45212 = EDGE_LOOP('',(#45213,#45221,#45222,#45230)); +#45213 = ORIENTED_EDGE('',*,*,#45214,.F.); +#45214 = EDGE_CURVE('',#43943,#45215,#45217,.T.); +#45215 = VERTEX_POINT('',#45216); +#45216 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#45217 = LINE('',#45218,#45219); +#45218 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#45219 = VECTOR('',#45220,1.); +#45220 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45221 = ORIENTED_EDGE('',*,*,#43942,.T.); +#45222 = ORIENTED_EDGE('',*,*,#45223,.T.); +#45223 = EDGE_CURVE('',#43945,#45224,#45226,.T.); +#45224 = VERTEX_POINT('',#45225); +#45225 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#45226 = LINE('',#45227,#45228); +#45227 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#45228 = VECTOR('',#45229,1.); +#45229 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45230 = ORIENTED_EDGE('',*,*,#45231,.F.); +#45231 = EDGE_CURVE('',#45215,#45224,#45232,.T.); +#45232 = LINE('',#45233,#45234); +#45233 = CARTESIAN_POINT('',(0.3,-12.6,5.3)); +#45234 = VECTOR('',#45235,1.); +#45235 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45236 = PLANE('',#45237); +#45237 = AXIS2_PLACEMENT_3D('',#45238,#45239,#45240); +#45238 = CARTESIAN_POINT('',(0.45,-12.6,5.45)); +#45239 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45240 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45241 = ADVANCED_FACE('',(#45242),#45260,.T.); +#45242 = FACE_BOUND('',#45243,.T.); +#45243 = EDGE_LOOP('',(#45244,#45245,#45246,#45254)); +#45244 = ORIENTED_EDGE('',*,*,#45223,.F.); +#45245 = ORIENTED_EDGE('',*,*,#43968,.T.); +#45246 = ORIENTED_EDGE('',*,*,#45247,.T.); +#45247 = EDGE_CURVE('',#43961,#45248,#45250,.T.); +#45248 = VERTEX_POINT('',#45249); +#45249 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#45250 = LINE('',#45251,#45252); +#45251 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#45252 = VECTOR('',#45253,1.); +#45253 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45254 = ORIENTED_EDGE('',*,*,#45255,.F.); +#45255 = EDGE_CURVE('',#45224,#45248,#45256,.T.); +#45256 = LINE('',#45257,#45258); +#45257 = CARTESIAN_POINT('',(0.6,-11.7,5.3)); +#45258 = VECTOR('',#45259,1.); +#45259 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45260 = PLANE('',#45261); +#45261 = AXIS2_PLACEMENT_3D('',#45262,#45263,#45264); +#45262 = CARTESIAN_POINT('',(0.6,-11.55,5.45)); +#45263 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45264 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45265 = ADVANCED_FACE('',(#45266),#45284,.T.); +#45266 = FACE_BOUND('',#45267,.T.); +#45267 = EDGE_LOOP('',(#45268,#45269,#45270,#45278)); +#45268 = ORIENTED_EDGE('',*,*,#45247,.F.); +#45269 = ORIENTED_EDGE('',*,*,#43960,.T.); +#45270 = ORIENTED_EDGE('',*,*,#45271,.T.); +#45271 = EDGE_CURVE('',#43953,#45272,#45274,.T.); +#45272 = VERTEX_POINT('',#45273); +#45273 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#45274 = LINE('',#45275,#45276); +#45275 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#45276 = VECTOR('',#45277,1.); +#45277 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45278 = ORIENTED_EDGE('',*,*,#45279,.F.); +#45279 = EDGE_CURVE('',#45248,#45272,#45280,.T.); +#45280 = LINE('',#45281,#45282); +#45281 = CARTESIAN_POINT('',(-0.3,-11.4,5.3)); +#45282 = VECTOR('',#45283,1.); +#45283 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45284 = PLANE('',#45285); +#45285 = AXIS2_PLACEMENT_3D('',#45286,#45287,#45288); +#45286 = CARTESIAN_POINT('',(-0.45,-11.4,5.45)); +#45287 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45288 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45289 = ADVANCED_FACE('',(#45290),#45301,.T.); +#45290 = FACE_BOUND('',#45291,.T.); +#45291 = EDGE_LOOP('',(#45292,#45293,#45294,#45295)); +#45292 = ORIENTED_EDGE('',*,*,#45271,.F.); +#45293 = ORIENTED_EDGE('',*,*,#43952,.T.); +#45294 = ORIENTED_EDGE('',*,*,#45214,.T.); +#45295 = ORIENTED_EDGE('',*,*,#45296,.F.); +#45296 = EDGE_CURVE('',#45272,#45215,#45297,.T.); +#45297 = LINE('',#45298,#45299); +#45298 = CARTESIAN_POINT('',(-0.6,-12.3,5.3)); +#45299 = VECTOR('',#45300,1.); +#45300 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45301 = PLANE('',#45302); +#45302 = AXIS2_PLACEMENT_3D('',#45303,#45304,#45305); +#45303 = CARTESIAN_POINT('',(-0.6,-12.45,5.45)); +#45304 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45305 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45306 = ADVANCED_FACE('',(#45307),#45332,.T.); +#45307 = FACE_BOUND('',#45308,.T.); +#45308 = EDGE_LOOP('',(#45309,#45317,#45318,#45326)); +#45309 = ORIENTED_EDGE('',*,*,#45310,.F.); +#45310 = EDGE_CURVE('',#43977,#45311,#45313,.T.); +#45311 = VERTEX_POINT('',#45312); +#45312 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#45313 = LINE('',#45314,#45315); +#45314 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#45315 = VECTOR('',#45316,1.); +#45316 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45317 = ORIENTED_EDGE('',*,*,#43976,.T.); +#45318 = ORIENTED_EDGE('',*,*,#45319,.T.); +#45319 = EDGE_CURVE('',#43979,#45320,#45322,.T.); +#45320 = VERTEX_POINT('',#45321); +#45321 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#45322 = LINE('',#45323,#45324); +#45323 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#45324 = VECTOR('',#45325,1.); +#45325 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45326 = ORIENTED_EDGE('',*,*,#45327,.F.); +#45327 = EDGE_CURVE('',#45311,#45320,#45328,.T.); +#45328 = LINE('',#45329,#45330); +#45329 = CARTESIAN_POINT('',(0.3,-10.6,5.3)); +#45330 = VECTOR('',#45331,1.); +#45331 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45332 = PLANE('',#45333); +#45333 = AXIS2_PLACEMENT_3D('',#45334,#45335,#45336); +#45334 = CARTESIAN_POINT('',(0.45,-10.6,5.45)); +#45335 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45336 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45337 = ADVANCED_FACE('',(#45338),#45356,.T.); +#45338 = FACE_BOUND('',#45339,.T.); +#45339 = EDGE_LOOP('',(#45340,#45341,#45342,#45350)); +#45340 = ORIENTED_EDGE('',*,*,#45319,.F.); +#45341 = ORIENTED_EDGE('',*,*,#44002,.T.); +#45342 = ORIENTED_EDGE('',*,*,#45343,.T.); +#45343 = EDGE_CURVE('',#43995,#45344,#45346,.T.); +#45344 = VERTEX_POINT('',#45345); +#45345 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#45346 = LINE('',#45347,#45348); +#45347 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#45348 = VECTOR('',#45349,1.); +#45349 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45350 = ORIENTED_EDGE('',*,*,#45351,.F.); +#45351 = EDGE_CURVE('',#45320,#45344,#45352,.T.); +#45352 = LINE('',#45353,#45354); +#45353 = CARTESIAN_POINT('',(0.6,-9.7,5.3)); +#45354 = VECTOR('',#45355,1.); +#45355 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45356 = PLANE('',#45357); +#45357 = AXIS2_PLACEMENT_3D('',#45358,#45359,#45360); +#45358 = CARTESIAN_POINT('',(0.6,-9.55,5.45)); +#45359 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45360 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45361 = ADVANCED_FACE('',(#45362),#45380,.T.); +#45362 = FACE_BOUND('',#45363,.T.); +#45363 = EDGE_LOOP('',(#45364,#45365,#45366,#45374)); +#45364 = ORIENTED_EDGE('',*,*,#45343,.F.); +#45365 = ORIENTED_EDGE('',*,*,#43994,.T.); +#45366 = ORIENTED_EDGE('',*,*,#45367,.T.); +#45367 = EDGE_CURVE('',#43987,#45368,#45370,.T.); +#45368 = VERTEX_POINT('',#45369); +#45369 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#45370 = LINE('',#45371,#45372); +#45371 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#45372 = VECTOR('',#45373,1.); +#45373 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45374 = ORIENTED_EDGE('',*,*,#45375,.F.); +#45375 = EDGE_CURVE('',#45344,#45368,#45376,.T.); +#45376 = LINE('',#45377,#45378); +#45377 = CARTESIAN_POINT('',(-0.3,-9.4,5.3)); +#45378 = VECTOR('',#45379,1.); +#45379 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45380 = PLANE('',#45381); +#45381 = AXIS2_PLACEMENT_3D('',#45382,#45383,#45384); +#45382 = CARTESIAN_POINT('',(-0.45,-9.4,5.45)); +#45383 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45384 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45385 = ADVANCED_FACE('',(#45386),#45397,.T.); +#45386 = FACE_BOUND('',#45387,.T.); +#45387 = EDGE_LOOP('',(#45388,#45389,#45390,#45391)); +#45388 = ORIENTED_EDGE('',*,*,#45367,.F.); +#45389 = ORIENTED_EDGE('',*,*,#43986,.T.); +#45390 = ORIENTED_EDGE('',*,*,#45310,.T.); +#45391 = ORIENTED_EDGE('',*,*,#45392,.F.); +#45392 = EDGE_CURVE('',#45368,#45311,#45393,.T.); +#45393 = LINE('',#45394,#45395); +#45394 = CARTESIAN_POINT('',(-0.6,-10.3,5.3)); +#45395 = VECTOR('',#45396,1.); +#45396 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45397 = PLANE('',#45398); +#45398 = AXIS2_PLACEMENT_3D('',#45399,#45400,#45401); +#45399 = CARTESIAN_POINT('',(-0.6,-10.45,5.45)); +#45400 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45401 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45402 = ADVANCED_FACE('',(#45403),#45428,.T.); +#45403 = FACE_BOUND('',#45404,.T.); +#45404 = EDGE_LOOP('',(#45405,#45413,#45414,#45422)); +#45405 = ORIENTED_EDGE('',*,*,#45406,.F.); +#45406 = EDGE_CURVE('',#44011,#45407,#45409,.T.); +#45407 = VERTEX_POINT('',#45408); +#45408 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#45409 = LINE('',#45410,#45411); +#45410 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#45411 = VECTOR('',#45412,1.); +#45412 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45413 = ORIENTED_EDGE('',*,*,#44010,.T.); +#45414 = ORIENTED_EDGE('',*,*,#45415,.T.); +#45415 = EDGE_CURVE('',#44013,#45416,#45418,.T.); +#45416 = VERTEX_POINT('',#45417); +#45417 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#45418 = LINE('',#45419,#45420); +#45419 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#45420 = VECTOR('',#45421,1.); +#45421 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45422 = ORIENTED_EDGE('',*,*,#45423,.F.); +#45423 = EDGE_CURVE('',#45407,#45416,#45424,.T.); +#45424 = LINE('',#45425,#45426); +#45425 = CARTESIAN_POINT('',(0.3,-8.6,5.3)); +#45426 = VECTOR('',#45427,1.); +#45427 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45428 = PLANE('',#45429); +#45429 = AXIS2_PLACEMENT_3D('',#45430,#45431,#45432); +#45430 = CARTESIAN_POINT('',(0.45,-8.6,5.45)); +#45431 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45432 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45433 = ADVANCED_FACE('',(#45434),#45452,.T.); +#45434 = FACE_BOUND('',#45435,.T.); +#45435 = EDGE_LOOP('',(#45436,#45437,#45438,#45446)); +#45436 = ORIENTED_EDGE('',*,*,#45415,.F.); +#45437 = ORIENTED_EDGE('',*,*,#44036,.T.); +#45438 = ORIENTED_EDGE('',*,*,#45439,.T.); +#45439 = EDGE_CURVE('',#44029,#45440,#45442,.T.); +#45440 = VERTEX_POINT('',#45441); +#45441 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#45442 = LINE('',#45443,#45444); +#45443 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#45444 = VECTOR('',#45445,1.); +#45445 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45446 = ORIENTED_EDGE('',*,*,#45447,.F.); +#45447 = EDGE_CURVE('',#45416,#45440,#45448,.T.); +#45448 = LINE('',#45449,#45450); +#45449 = CARTESIAN_POINT('',(0.6,-7.7,5.3)); +#45450 = VECTOR('',#45451,1.); +#45451 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45452 = PLANE('',#45453); +#45453 = AXIS2_PLACEMENT_3D('',#45454,#45455,#45456); +#45454 = CARTESIAN_POINT('',(0.6,-7.55,5.45)); +#45455 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45456 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45457 = ADVANCED_FACE('',(#45458),#45476,.T.); +#45458 = FACE_BOUND('',#45459,.T.); +#45459 = EDGE_LOOP('',(#45460,#45461,#45462,#45470)); +#45460 = ORIENTED_EDGE('',*,*,#45439,.F.); +#45461 = ORIENTED_EDGE('',*,*,#44028,.T.); +#45462 = ORIENTED_EDGE('',*,*,#45463,.T.); +#45463 = EDGE_CURVE('',#44021,#45464,#45466,.T.); +#45464 = VERTEX_POINT('',#45465); +#45465 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#45466 = LINE('',#45467,#45468); +#45467 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#45468 = VECTOR('',#45469,1.); +#45469 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45470 = ORIENTED_EDGE('',*,*,#45471,.F.); +#45471 = EDGE_CURVE('',#45440,#45464,#45472,.T.); +#45472 = LINE('',#45473,#45474); +#45473 = CARTESIAN_POINT('',(-0.3,-7.4,5.3)); +#45474 = VECTOR('',#45475,1.); +#45475 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45476 = PLANE('',#45477); +#45477 = AXIS2_PLACEMENT_3D('',#45478,#45479,#45480); +#45478 = CARTESIAN_POINT('',(-0.45,-7.4,5.45)); +#45479 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45480 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45481 = ADVANCED_FACE('',(#45482),#45493,.T.); +#45482 = FACE_BOUND('',#45483,.T.); +#45483 = EDGE_LOOP('',(#45484,#45485,#45486,#45487)); +#45484 = ORIENTED_EDGE('',*,*,#45463,.F.); +#45485 = ORIENTED_EDGE('',*,*,#44020,.T.); +#45486 = ORIENTED_EDGE('',*,*,#45406,.T.); +#45487 = ORIENTED_EDGE('',*,*,#45488,.F.); +#45488 = EDGE_CURVE('',#45464,#45407,#45489,.T.); +#45489 = LINE('',#45490,#45491); +#45490 = CARTESIAN_POINT('',(-0.6,-8.3,5.3)); +#45491 = VECTOR('',#45492,1.); +#45492 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45493 = PLANE('',#45494); +#45494 = AXIS2_PLACEMENT_3D('',#45495,#45496,#45497); +#45495 = CARTESIAN_POINT('',(-0.6,-8.45,5.45)); +#45496 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45497 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45498 = ADVANCED_FACE('',(#45499),#45524,.T.); +#45499 = FACE_BOUND('',#45500,.T.); +#45500 = EDGE_LOOP('',(#45501,#45509,#45510,#45518)); +#45501 = ORIENTED_EDGE('',*,*,#45502,.F.); +#45502 = EDGE_CURVE('',#44045,#45503,#45505,.T.); +#45503 = VERTEX_POINT('',#45504); +#45504 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#45505 = LINE('',#45506,#45507); +#45506 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#45507 = VECTOR('',#45508,1.); +#45508 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45509 = ORIENTED_EDGE('',*,*,#44044,.T.); +#45510 = ORIENTED_EDGE('',*,*,#45511,.T.); +#45511 = EDGE_CURVE('',#44047,#45512,#45514,.T.); +#45512 = VERTEX_POINT('',#45513); +#45513 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#45514 = LINE('',#45515,#45516); +#45515 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#45516 = VECTOR('',#45517,1.); +#45517 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45518 = ORIENTED_EDGE('',*,*,#45519,.F.); +#45519 = EDGE_CURVE('',#45503,#45512,#45520,.T.); +#45520 = LINE('',#45521,#45522); +#45521 = CARTESIAN_POINT('',(0.3,-6.6,5.3)); +#45522 = VECTOR('',#45523,1.); +#45523 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45524 = PLANE('',#45525); +#45525 = AXIS2_PLACEMENT_3D('',#45526,#45527,#45528); +#45526 = CARTESIAN_POINT('',(0.45,-6.6,5.45)); +#45527 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45528 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45529 = ADVANCED_FACE('',(#45530),#45548,.T.); +#45530 = FACE_BOUND('',#45531,.T.); +#45531 = EDGE_LOOP('',(#45532,#45533,#45534,#45542)); +#45532 = ORIENTED_EDGE('',*,*,#45511,.F.); +#45533 = ORIENTED_EDGE('',*,*,#44070,.T.); +#45534 = ORIENTED_EDGE('',*,*,#45535,.T.); +#45535 = EDGE_CURVE('',#44063,#45536,#45538,.T.); +#45536 = VERTEX_POINT('',#45537); +#45537 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#45538 = LINE('',#45539,#45540); +#45539 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#45540 = VECTOR('',#45541,1.); +#45541 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45542 = ORIENTED_EDGE('',*,*,#45543,.F.); +#45543 = EDGE_CURVE('',#45512,#45536,#45544,.T.); +#45544 = LINE('',#45545,#45546); +#45545 = CARTESIAN_POINT('',(0.6,-5.7,5.3)); +#45546 = VECTOR('',#45547,1.); +#45547 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45548 = PLANE('',#45549); +#45549 = AXIS2_PLACEMENT_3D('',#45550,#45551,#45552); +#45550 = CARTESIAN_POINT('',(0.6,-5.55,5.45)); +#45551 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45552 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45553 = ADVANCED_FACE('',(#45554),#45572,.T.); +#45554 = FACE_BOUND('',#45555,.T.); +#45555 = EDGE_LOOP('',(#45556,#45557,#45558,#45566)); +#45556 = ORIENTED_EDGE('',*,*,#45535,.F.); +#45557 = ORIENTED_EDGE('',*,*,#44062,.T.); +#45558 = ORIENTED_EDGE('',*,*,#45559,.T.); +#45559 = EDGE_CURVE('',#44055,#45560,#45562,.T.); +#45560 = VERTEX_POINT('',#45561); +#45561 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#45562 = LINE('',#45563,#45564); +#45563 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#45564 = VECTOR('',#45565,1.); +#45565 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45566 = ORIENTED_EDGE('',*,*,#45567,.F.); +#45567 = EDGE_CURVE('',#45536,#45560,#45568,.T.); +#45568 = LINE('',#45569,#45570); +#45569 = CARTESIAN_POINT('',(-0.3,-5.4,5.3)); +#45570 = VECTOR('',#45571,1.); +#45571 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45572 = PLANE('',#45573); +#45573 = AXIS2_PLACEMENT_3D('',#45574,#45575,#45576); +#45574 = CARTESIAN_POINT('',(-0.45,-5.4,5.45)); +#45575 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45576 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45577 = ADVANCED_FACE('',(#45578),#45589,.T.); +#45578 = FACE_BOUND('',#45579,.T.); +#45579 = EDGE_LOOP('',(#45580,#45581,#45582,#45583)); +#45580 = ORIENTED_EDGE('',*,*,#45559,.F.); +#45581 = ORIENTED_EDGE('',*,*,#44054,.T.); +#45582 = ORIENTED_EDGE('',*,*,#45502,.T.); +#45583 = ORIENTED_EDGE('',*,*,#45584,.F.); +#45584 = EDGE_CURVE('',#45560,#45503,#45585,.T.); +#45585 = LINE('',#45586,#45587); +#45586 = CARTESIAN_POINT('',(-0.6,-6.3,5.3)); +#45587 = VECTOR('',#45588,1.); +#45588 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45589 = PLANE('',#45590); +#45590 = AXIS2_PLACEMENT_3D('',#45591,#45592,#45593); +#45591 = CARTESIAN_POINT('',(-0.6,-6.45,5.45)); +#45592 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45593 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45594 = ADVANCED_FACE('',(#45595),#45620,.T.); +#45595 = FACE_BOUND('',#45596,.T.); +#45596 = EDGE_LOOP('',(#45597,#45605,#45606,#45614)); +#45597 = ORIENTED_EDGE('',*,*,#45598,.F.); +#45598 = EDGE_CURVE('',#44079,#45599,#45601,.T.); +#45599 = VERTEX_POINT('',#45600); +#45600 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#45601 = LINE('',#45602,#45603); +#45602 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#45603 = VECTOR('',#45604,1.); +#45604 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45605 = ORIENTED_EDGE('',*,*,#44078,.T.); +#45606 = ORIENTED_EDGE('',*,*,#45607,.T.); +#45607 = EDGE_CURVE('',#44081,#45608,#45610,.T.); +#45608 = VERTEX_POINT('',#45609); +#45609 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#45610 = LINE('',#45611,#45612); +#45611 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#45612 = VECTOR('',#45613,1.); +#45613 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45614 = ORIENTED_EDGE('',*,*,#45615,.F.); +#45615 = EDGE_CURVE('',#45599,#45608,#45616,.T.); +#45616 = LINE('',#45617,#45618); +#45617 = CARTESIAN_POINT('',(0.3,-4.6,5.3)); +#45618 = VECTOR('',#45619,1.); +#45619 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45620 = PLANE('',#45621); +#45621 = AXIS2_PLACEMENT_3D('',#45622,#45623,#45624); +#45622 = CARTESIAN_POINT('',(0.45,-4.6,5.45)); +#45623 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45624 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45625 = ADVANCED_FACE('',(#45626),#45644,.T.); +#45626 = FACE_BOUND('',#45627,.T.); +#45627 = EDGE_LOOP('',(#45628,#45629,#45630,#45638)); +#45628 = ORIENTED_EDGE('',*,*,#45607,.F.); +#45629 = ORIENTED_EDGE('',*,*,#44104,.T.); +#45630 = ORIENTED_EDGE('',*,*,#45631,.T.); +#45631 = EDGE_CURVE('',#44097,#45632,#45634,.T.); +#45632 = VERTEX_POINT('',#45633); +#45633 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#45634 = LINE('',#45635,#45636); +#45635 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#45636 = VECTOR('',#45637,1.); +#45637 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45638 = ORIENTED_EDGE('',*,*,#45639,.F.); +#45639 = EDGE_CURVE('',#45608,#45632,#45640,.T.); +#45640 = LINE('',#45641,#45642); +#45641 = CARTESIAN_POINT('',(0.6,-3.7,5.3)); +#45642 = VECTOR('',#45643,1.); +#45643 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45644 = PLANE('',#45645); +#45645 = AXIS2_PLACEMENT_3D('',#45646,#45647,#45648); +#45646 = CARTESIAN_POINT('',(0.6,-3.55,5.45)); +#45647 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45648 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45649 = ADVANCED_FACE('',(#45650),#45668,.T.); +#45650 = FACE_BOUND('',#45651,.T.); +#45651 = EDGE_LOOP('',(#45652,#45653,#45654,#45662)); +#45652 = ORIENTED_EDGE('',*,*,#45631,.F.); +#45653 = ORIENTED_EDGE('',*,*,#44096,.T.); +#45654 = ORIENTED_EDGE('',*,*,#45655,.T.); +#45655 = EDGE_CURVE('',#44089,#45656,#45658,.T.); +#45656 = VERTEX_POINT('',#45657); +#45657 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#45658 = LINE('',#45659,#45660); +#45659 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#45660 = VECTOR('',#45661,1.); +#45661 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45662 = ORIENTED_EDGE('',*,*,#45663,.F.); +#45663 = EDGE_CURVE('',#45632,#45656,#45664,.T.); +#45664 = LINE('',#45665,#45666); +#45665 = CARTESIAN_POINT('',(-0.3,-3.4,5.3)); +#45666 = VECTOR('',#45667,1.); +#45667 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45668 = PLANE('',#45669); +#45669 = AXIS2_PLACEMENT_3D('',#45670,#45671,#45672); +#45670 = CARTESIAN_POINT('',(-0.45,-3.4,5.45)); +#45671 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45672 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45673 = ADVANCED_FACE('',(#45674),#45685,.T.); +#45674 = FACE_BOUND('',#45675,.T.); +#45675 = EDGE_LOOP('',(#45676,#45677,#45678,#45679)); +#45676 = ORIENTED_EDGE('',*,*,#45655,.F.); +#45677 = ORIENTED_EDGE('',*,*,#44088,.T.); +#45678 = ORIENTED_EDGE('',*,*,#45598,.T.); +#45679 = ORIENTED_EDGE('',*,*,#45680,.F.); +#45680 = EDGE_CURVE('',#45656,#45599,#45681,.T.); +#45681 = LINE('',#45682,#45683); +#45682 = CARTESIAN_POINT('',(-0.6,-4.3,5.3)); +#45683 = VECTOR('',#45684,1.); +#45684 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45685 = PLANE('',#45686); +#45686 = AXIS2_PLACEMENT_3D('',#45687,#45688,#45689); +#45687 = CARTESIAN_POINT('',(-0.6,-4.45,5.45)); +#45688 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45689 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45690 = ADVANCED_FACE('',(#45691),#45716,.T.); +#45691 = FACE_BOUND('',#45692,.T.); +#45692 = EDGE_LOOP('',(#45693,#45701,#45702,#45710)); +#45693 = ORIENTED_EDGE('',*,*,#45694,.F.); +#45694 = EDGE_CURVE('',#44113,#45695,#45697,.T.); +#45695 = VERTEX_POINT('',#45696); +#45696 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#45697 = LINE('',#45698,#45699); +#45698 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#45699 = VECTOR('',#45700,1.); +#45700 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45701 = ORIENTED_EDGE('',*,*,#44112,.T.); +#45702 = ORIENTED_EDGE('',*,*,#45703,.T.); +#45703 = EDGE_CURVE('',#44115,#45704,#45706,.T.); +#45704 = VERTEX_POINT('',#45705); +#45705 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#45706 = LINE('',#45707,#45708); +#45707 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#45708 = VECTOR('',#45709,1.); +#45709 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45710 = ORIENTED_EDGE('',*,*,#45711,.F.); +#45711 = EDGE_CURVE('',#45695,#45704,#45712,.T.); +#45712 = LINE('',#45713,#45714); +#45713 = CARTESIAN_POINT('',(0.3,-2.6,5.3)); +#45714 = VECTOR('',#45715,1.); +#45715 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45716 = PLANE('',#45717); +#45717 = AXIS2_PLACEMENT_3D('',#45718,#45719,#45720); +#45718 = CARTESIAN_POINT('',(0.45,-2.6,5.45)); +#45719 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45720 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45721 = ADVANCED_FACE('',(#45722),#45740,.T.); +#45722 = FACE_BOUND('',#45723,.T.); +#45723 = EDGE_LOOP('',(#45724,#45725,#45726,#45734)); +#45724 = ORIENTED_EDGE('',*,*,#45703,.F.); +#45725 = ORIENTED_EDGE('',*,*,#44138,.T.); +#45726 = ORIENTED_EDGE('',*,*,#45727,.T.); +#45727 = EDGE_CURVE('',#44131,#45728,#45730,.T.); +#45728 = VERTEX_POINT('',#45729); +#45729 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#45730 = LINE('',#45731,#45732); +#45731 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#45732 = VECTOR('',#45733,1.); +#45733 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45734 = ORIENTED_EDGE('',*,*,#45735,.F.); +#45735 = EDGE_CURVE('',#45704,#45728,#45736,.T.); +#45736 = LINE('',#45737,#45738); +#45737 = CARTESIAN_POINT('',(0.6,-1.7,5.3)); +#45738 = VECTOR('',#45739,1.); +#45739 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45740 = PLANE('',#45741); +#45741 = AXIS2_PLACEMENT_3D('',#45742,#45743,#45744); +#45742 = CARTESIAN_POINT('',(0.6,-1.55,5.45)); +#45743 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45744 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45745 = ADVANCED_FACE('',(#45746),#45764,.T.); +#45746 = FACE_BOUND('',#45747,.T.); +#45747 = EDGE_LOOP('',(#45748,#45749,#45750,#45758)); +#45748 = ORIENTED_EDGE('',*,*,#45727,.F.); +#45749 = ORIENTED_EDGE('',*,*,#44130,.T.); +#45750 = ORIENTED_EDGE('',*,*,#45751,.T.); +#45751 = EDGE_CURVE('',#44123,#45752,#45754,.T.); +#45752 = VERTEX_POINT('',#45753); +#45753 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#45754 = LINE('',#45755,#45756); +#45755 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#45756 = VECTOR('',#45757,1.); +#45757 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45758 = ORIENTED_EDGE('',*,*,#45759,.F.); +#45759 = EDGE_CURVE('',#45728,#45752,#45760,.T.); +#45760 = LINE('',#45761,#45762); +#45761 = CARTESIAN_POINT('',(-0.3,-1.4,5.3)); +#45762 = VECTOR('',#45763,1.); +#45763 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45764 = PLANE('',#45765); +#45765 = AXIS2_PLACEMENT_3D('',#45766,#45767,#45768); +#45766 = CARTESIAN_POINT('',(-0.45,-1.4,5.45)); +#45767 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45768 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45769 = ADVANCED_FACE('',(#45770),#45781,.T.); +#45770 = FACE_BOUND('',#45771,.T.); +#45771 = EDGE_LOOP('',(#45772,#45773,#45774,#45775)); +#45772 = ORIENTED_EDGE('',*,*,#45751,.F.); +#45773 = ORIENTED_EDGE('',*,*,#44122,.T.); +#45774 = ORIENTED_EDGE('',*,*,#45694,.T.); +#45775 = ORIENTED_EDGE('',*,*,#45776,.F.); +#45776 = EDGE_CURVE('',#45752,#45695,#45777,.T.); +#45777 = LINE('',#45778,#45779); +#45778 = CARTESIAN_POINT('',(-0.6,-2.3,5.3)); +#45779 = VECTOR('',#45780,1.); +#45780 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45781 = PLANE('',#45782); +#45782 = AXIS2_PLACEMENT_3D('',#45783,#45784,#45785); +#45783 = CARTESIAN_POINT('',(-0.6,-2.45,5.45)); +#45784 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45785 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45786 = ADVANCED_FACE('',(#45787),#45812,.T.); +#45787 = FACE_BOUND('',#45788,.T.); +#45788 = EDGE_LOOP('',(#45789,#45797,#45798,#45806)); +#45789 = ORIENTED_EDGE('',*,*,#45790,.F.); +#45790 = EDGE_CURVE('',#44147,#45791,#45793,.T.); +#45791 = VERTEX_POINT('',#45792); +#45792 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#45793 = LINE('',#45794,#45795); +#45794 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#45795 = VECTOR('',#45796,1.); +#45796 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#45797 = ORIENTED_EDGE('',*,*,#44146,.T.); +#45798 = ORIENTED_EDGE('',*,*,#45799,.T.); +#45799 = EDGE_CURVE('',#44149,#45800,#45802,.T.); +#45800 = VERTEX_POINT('',#45801); +#45801 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#45802 = LINE('',#45803,#45804); +#45803 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#45804 = VECTOR('',#45805,1.); +#45805 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#45806 = ORIENTED_EDGE('',*,*,#45807,.F.); +#45807 = EDGE_CURVE('',#45791,#45800,#45808,.T.); +#45808 = LINE('',#45809,#45810); +#45809 = CARTESIAN_POINT('',(0.3,-0.6,5.3)); +#45810 = VECTOR('',#45811,1.); +#45811 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45812 = PLANE('',#45813); +#45813 = AXIS2_PLACEMENT_3D('',#45814,#45815,#45816); +#45814 = CARTESIAN_POINT('',(0.45,-0.6,5.45)); +#45815 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187 + )); +#45816 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#45817 = ADVANCED_FACE('',(#45818),#45836,.T.); +#45818 = FACE_BOUND('',#45819,.T.); +#45819 = EDGE_LOOP('',(#45820,#45821,#45822,#45830)); +#45820 = ORIENTED_EDGE('',*,*,#45799,.F.); +#45821 = ORIENTED_EDGE('',*,*,#44172,.T.); +#45822 = ORIENTED_EDGE('',*,*,#45823,.T.); +#45823 = EDGE_CURVE('',#44165,#45824,#45826,.T.); +#45824 = VERTEX_POINT('',#45825); +#45825 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#45826 = LINE('',#45827,#45828); +#45827 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#45828 = VECTOR('',#45829,1.); +#45829 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#45830 = ORIENTED_EDGE('',*,*,#45831,.F.); +#45831 = EDGE_CURVE('',#45800,#45824,#45832,.T.); +#45832 = LINE('',#45833,#45834); +#45833 = CARTESIAN_POINT('',(0.6,0.3,5.3)); +#45834 = VECTOR('',#45835,1.); +#45835 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45836 = PLANE('',#45837); +#45837 = AXIS2_PLACEMENT_3D('',#45838,#45839,#45840); +#45838 = CARTESIAN_POINT('',(0.6,0.45,5.45)); +#45839 = DIRECTION('',(-7.503205488379E-17,-0.707106781187, + 0.707106781187)); +#45840 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#45841 = ADVANCED_FACE('',(#45842),#45860,.T.); +#45842 = FACE_BOUND('',#45843,.T.); +#45843 = EDGE_LOOP('',(#45844,#45845,#45846,#45854)); +#45844 = ORIENTED_EDGE('',*,*,#45823,.F.); +#45845 = ORIENTED_EDGE('',*,*,#44164,.T.); +#45846 = ORIENTED_EDGE('',*,*,#45847,.T.); +#45847 = EDGE_CURVE('',#44157,#45848,#45850,.T.); +#45848 = VERTEX_POINT('',#45849); +#45849 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#45850 = LINE('',#45851,#45852); +#45851 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#45852 = VECTOR('',#45853,1.); +#45853 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#45854 = ORIENTED_EDGE('',*,*,#45855,.F.); +#45855 = EDGE_CURVE('',#45824,#45848,#45856,.T.); +#45856 = LINE('',#45857,#45858); +#45857 = CARTESIAN_POINT('',(-0.3,0.6,5.3)); +#45858 = VECTOR('',#45859,1.); +#45859 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45860 = PLANE('',#45861); +#45861 = AXIS2_PLACEMENT_3D('',#45862,#45863,#45864); +#45862 = CARTESIAN_POINT('',(-0.45,0.6,5.45)); +#45863 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187 + )); +#45864 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#45865 = ADVANCED_FACE('',(#45866),#45877,.T.); +#45866 = FACE_BOUND('',#45867,.T.); +#45867 = EDGE_LOOP('',(#45868,#45869,#45870,#45871)); +#45868 = ORIENTED_EDGE('',*,*,#45847,.F.); +#45869 = ORIENTED_EDGE('',*,*,#44156,.T.); +#45870 = ORIENTED_EDGE('',*,*,#45790,.T.); +#45871 = ORIENTED_EDGE('',*,*,#45872,.F.); +#45872 = EDGE_CURVE('',#45848,#45791,#45873,.T.); +#45873 = LINE('',#45874,#45875); +#45874 = CARTESIAN_POINT('',(-0.6,-0.3,5.3)); +#45875 = VECTOR('',#45876,1.); +#45876 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45877 = PLANE('',#45878); +#45878 = AXIS2_PLACEMENT_3D('',#45879,#45880,#45881); +#45879 = CARTESIAN_POINT('',(-0.6,-0.45,5.45)); +#45880 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#45881 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#45882 = ADVANCED_FACE('',(#45883),#45894,.T.); +#45883 = FACE_BOUND('',#45884,.T.); +#45884 = EDGE_LOOP('',(#45885,#45886,#45887,#45893)); +#45885 = ORIENTED_EDGE('',*,*,#44236,.F.); +#45886 = ORIENTED_EDGE('',*,*,#44246,.T.); +#45887 = ORIENTED_EDGE('',*,*,#45888,.T.); +#45888 = EDGE_CURVE('',#44247,#44287,#45889,.T.); +#45889 = LINE('',#45890,#45891); +#45890 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#45891 = VECTOR('',#45892,1.); +#45892 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45893 = ORIENTED_EDGE('',*,*,#44294,.T.); +#45894 = PLANE('',#45895); +#45895 = AXIS2_PLACEMENT_3D('',#45896,#45897,#45898); +#45896 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#45897 = DIRECTION('',(0.,-0.,-1.)); +#45898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45899 = ADVANCED_FACE('',(#45900),#45941,.F.); +#45900 = FACE_BOUND('',#45901,.F.); +#45901 = EDGE_LOOP('',(#45902,#45910,#45911,#45919,#45927,#45935)); +#45902 = ORIENTED_EDGE('',*,*,#45903,.T.); +#45903 = EDGE_CURVE('',#45904,#44287,#45906,.T.); +#45904 = VERTEX_POINT('',#45905); +#45905 = CARTESIAN_POINT('',(0.1,-18.3,-2.1)); +#45906 = LINE('',#45907,#45908); +#45907 = CARTESIAN_POINT('',(0.1,-18.3,-2.1)); +#45908 = VECTOR('',#45909,1.); +#45909 = DIRECTION('',(0.,0.,1.)); +#45910 = ORIENTED_EDGE('',*,*,#44286,.F.); +#45911 = ORIENTED_EDGE('',*,*,#45912,.T.); +#45912 = EDGE_CURVE('',#44279,#45913,#45915,.T.); +#45913 = VERTEX_POINT('',#45914); +#45914 = CARTESIAN_POINT('',(0.1,-17.7,-2.1)); +#45915 = LINE('',#45916,#45917); +#45916 = CARTESIAN_POINT('',(0.1,-17.7,0.2)); +#45917 = VECTOR('',#45918,1.); +#45918 = DIRECTION('',(0.,0.,-1.)); +#45919 = ORIENTED_EDGE('',*,*,#45920,.T.); +#45920 = EDGE_CURVE('',#45913,#45921,#45923,.T.); +#45921 = VERTEX_POINT('',#45922); +#45922 = CARTESIAN_POINT('',(0.1,-17.85,-2.7)); +#45923 = LINE('',#45924,#45925); +#45924 = CARTESIAN_POINT('',(0.1,-17.7,-2.1)); +#45925 = VECTOR('',#45926,1.); +#45926 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#45927 = ORIENTED_EDGE('',*,*,#45928,.T.); +#45928 = EDGE_CURVE('',#45921,#45929,#45931,.T.); +#45929 = VERTEX_POINT('',#45930); +#45930 = CARTESIAN_POINT('',(0.1,-18.15,-2.7)); +#45931 = LINE('',#45932,#45933); +#45932 = CARTESIAN_POINT('',(0.1,-17.85,-2.7)); +#45933 = VECTOR('',#45934,1.); +#45934 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45935 = ORIENTED_EDGE('',*,*,#45936,.T.); +#45936 = EDGE_CURVE('',#45929,#45904,#45937,.T.); +#45937 = LINE('',#45938,#45939); +#45938 = CARTESIAN_POINT('',(0.1,-18.15,-2.7)); +#45939 = VECTOR('',#45940,1.); +#45940 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#45941 = PLANE('',#45942); +#45942 = AXIS2_PLACEMENT_3D('',#45943,#45944,#45945); +#45943 = CARTESIAN_POINT('',(0.1,-18.,2.448597401424)); +#45944 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#45945 = DIRECTION('',(0.,0.,1.)); +#45946 = ADVANCED_FACE('',(#45947),#45958,.T.); +#45947 = FACE_BOUND('',#45948,.T.); +#45948 = EDGE_LOOP('',(#45949,#45955,#45956,#45957)); +#45949 = ORIENTED_EDGE('',*,*,#45950,.F.); +#45950 = EDGE_CURVE('',#44255,#44279,#45951,.T.); +#45951 = LINE('',#45952,#45953); +#45952 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#45953 = VECTOR('',#45954,1.); +#45954 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#45955 = ORIENTED_EDGE('',*,*,#44262,.T.); +#45956 = ORIENTED_EDGE('',*,*,#44270,.T.); +#45957 = ORIENTED_EDGE('',*,*,#44278,.T.); +#45958 = PLANE('',#45959); +#45959 = AXIS2_PLACEMENT_3D('',#45960,#45961,#45962); +#45960 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#45961 = DIRECTION('',(0.,-0.,-1.)); +#45962 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#45963 = ADVANCED_FACE('',(#45964),#46005,.T.); +#45964 = FACE_BOUND('',#45965,.T.); +#45965 = EDGE_LOOP('',(#45966,#45974,#45975,#45983,#45991,#45999)); +#45966 = ORIENTED_EDGE('',*,*,#45967,.T.); +#45967 = EDGE_CURVE('',#45968,#44247,#45970,.T.); +#45968 = VERTEX_POINT('',#45969); +#45969 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#45970 = LINE('',#45971,#45972); +#45971 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#45972 = VECTOR('',#45973,1.); +#45973 = DIRECTION('',(0.,0.,1.)); +#45974 = ORIENTED_EDGE('',*,*,#44254,.F.); +#45975 = ORIENTED_EDGE('',*,*,#45976,.T.); +#45976 = EDGE_CURVE('',#44255,#45977,#45979,.T.); +#45977 = VERTEX_POINT('',#45978); +#45978 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#45979 = LINE('',#45980,#45981); +#45980 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#45981 = VECTOR('',#45982,1.); +#45982 = DIRECTION('',(0.,0.,-1.)); +#45983 = ORIENTED_EDGE('',*,*,#45984,.T.); +#45984 = EDGE_CURVE('',#45977,#45985,#45987,.T.); +#45985 = VERTEX_POINT('',#45986); +#45986 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#45987 = LINE('',#45988,#45989); +#45988 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#45989 = VECTOR('',#45990,1.); +#45990 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#45991 = ORIENTED_EDGE('',*,*,#45992,.F.); +#45992 = EDGE_CURVE('',#45993,#45985,#45995,.T.); +#45993 = VERTEX_POINT('',#45994); +#45994 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#45995 = LINE('',#45996,#45997); +#45996 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#45997 = VECTOR('',#45998,1.); +#45998 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#45999 = ORIENTED_EDGE('',*,*,#46000,.T.); +#46000 = EDGE_CURVE('',#45993,#45968,#46001,.T.); +#46001 = LINE('',#46002,#46003); +#46002 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#46003 = VECTOR('',#46004,1.); +#46004 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46005 = PLANE('',#46006); +#46006 = AXIS2_PLACEMENT_3D('',#46007,#46008,#46009); +#46007 = CARTESIAN_POINT('',(-0.1,-18.,2.448597401424)); +#46008 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46009 = DIRECTION('',(0.,0.,1.)); +#46010 = ADVANCED_FACE('',(#46011),#46022,.T.); +#46011 = FACE_BOUND('',#46012,.T.); +#46012 = EDGE_LOOP('',(#46013,#46014,#46015,#46021)); +#46013 = ORIENTED_EDGE('',*,*,#44302,.F.); +#46014 = ORIENTED_EDGE('',*,*,#44312,.T.); +#46015 = ORIENTED_EDGE('',*,*,#46016,.T.); +#46016 = EDGE_CURVE('',#44313,#44353,#46017,.T.); +#46017 = LINE('',#46018,#46019); +#46018 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#46019 = VECTOR('',#46020,1.); +#46020 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46021 = ORIENTED_EDGE('',*,*,#44360,.T.); +#46022 = PLANE('',#46023); +#46023 = AXIS2_PLACEMENT_3D('',#46024,#46025,#46026); +#46024 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#46025 = DIRECTION('',(0.,-0.,-1.)); +#46026 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46027 = ADVANCED_FACE('',(#46028),#46069,.F.); +#46028 = FACE_BOUND('',#46029,.F.); +#46029 = EDGE_LOOP('',(#46030,#46038,#46039,#46047,#46055,#46063)); +#46030 = ORIENTED_EDGE('',*,*,#46031,.T.); +#46031 = EDGE_CURVE('',#46032,#44353,#46034,.T.); +#46032 = VERTEX_POINT('',#46033); +#46033 = CARTESIAN_POINT('',(0.1,-16.3,-2.1)); +#46034 = LINE('',#46035,#46036); +#46035 = CARTESIAN_POINT('',(0.1,-16.3,-2.1)); +#46036 = VECTOR('',#46037,1.); +#46037 = DIRECTION('',(0.,0.,1.)); +#46038 = ORIENTED_EDGE('',*,*,#44352,.F.); +#46039 = ORIENTED_EDGE('',*,*,#46040,.T.); +#46040 = EDGE_CURVE('',#44345,#46041,#46043,.T.); +#46041 = VERTEX_POINT('',#46042); +#46042 = CARTESIAN_POINT('',(0.1,-15.7,-2.1)); +#46043 = LINE('',#46044,#46045); +#46044 = CARTESIAN_POINT('',(0.1,-15.7,0.2)); +#46045 = VECTOR('',#46046,1.); +#46046 = DIRECTION('',(0.,0.,-1.)); +#46047 = ORIENTED_EDGE('',*,*,#46048,.T.); +#46048 = EDGE_CURVE('',#46041,#46049,#46051,.T.); +#46049 = VERTEX_POINT('',#46050); +#46050 = CARTESIAN_POINT('',(0.1,-15.85,-2.7)); +#46051 = LINE('',#46052,#46053); +#46052 = CARTESIAN_POINT('',(0.1,-15.7,-2.1)); +#46053 = VECTOR('',#46054,1.); +#46054 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46055 = ORIENTED_EDGE('',*,*,#46056,.T.); +#46056 = EDGE_CURVE('',#46049,#46057,#46059,.T.); +#46057 = VERTEX_POINT('',#46058); +#46058 = CARTESIAN_POINT('',(0.1,-16.15,-2.7)); +#46059 = LINE('',#46060,#46061); +#46060 = CARTESIAN_POINT('',(0.1,-15.85,-2.7)); +#46061 = VECTOR('',#46062,1.); +#46062 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46063 = ORIENTED_EDGE('',*,*,#46064,.T.); +#46064 = EDGE_CURVE('',#46057,#46032,#46065,.T.); +#46065 = LINE('',#46066,#46067); +#46066 = CARTESIAN_POINT('',(0.1,-16.15,-2.7)); +#46067 = VECTOR('',#46068,1.); +#46068 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46069 = PLANE('',#46070); +#46070 = AXIS2_PLACEMENT_3D('',#46071,#46072,#46073); +#46071 = CARTESIAN_POINT('',(0.1,-16.,2.448597401424)); +#46072 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46073 = DIRECTION('',(0.,0.,1.)); +#46074 = ADVANCED_FACE('',(#46075),#46086,.T.); +#46075 = FACE_BOUND('',#46076,.T.); +#46076 = EDGE_LOOP('',(#46077,#46083,#46084,#46085)); +#46077 = ORIENTED_EDGE('',*,*,#46078,.F.); +#46078 = EDGE_CURVE('',#44321,#44345,#46079,.T.); +#46079 = LINE('',#46080,#46081); +#46080 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#46081 = VECTOR('',#46082,1.); +#46082 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46083 = ORIENTED_EDGE('',*,*,#44328,.T.); +#46084 = ORIENTED_EDGE('',*,*,#44336,.T.); +#46085 = ORIENTED_EDGE('',*,*,#44344,.T.); +#46086 = PLANE('',#46087); +#46087 = AXIS2_PLACEMENT_3D('',#46088,#46089,#46090); +#46088 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#46089 = DIRECTION('',(0.,-0.,-1.)); +#46090 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46091 = ADVANCED_FACE('',(#46092),#46133,.T.); +#46092 = FACE_BOUND('',#46093,.T.); +#46093 = EDGE_LOOP('',(#46094,#46102,#46103,#46111,#46119,#46127)); +#46094 = ORIENTED_EDGE('',*,*,#46095,.T.); +#46095 = EDGE_CURVE('',#46096,#44313,#46098,.T.); +#46096 = VERTEX_POINT('',#46097); +#46097 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#46098 = LINE('',#46099,#46100); +#46099 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#46100 = VECTOR('',#46101,1.); +#46101 = DIRECTION('',(0.,0.,1.)); +#46102 = ORIENTED_EDGE('',*,*,#44320,.F.); +#46103 = ORIENTED_EDGE('',*,*,#46104,.T.); +#46104 = EDGE_CURVE('',#44321,#46105,#46107,.T.); +#46105 = VERTEX_POINT('',#46106); +#46106 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#46107 = LINE('',#46108,#46109); +#46108 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#46109 = VECTOR('',#46110,1.); +#46110 = DIRECTION('',(0.,0.,-1.)); +#46111 = ORIENTED_EDGE('',*,*,#46112,.T.); +#46112 = EDGE_CURVE('',#46105,#46113,#46115,.T.); +#46113 = VERTEX_POINT('',#46114); +#46114 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#46115 = LINE('',#46116,#46117); +#46116 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#46117 = VECTOR('',#46118,1.); +#46118 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46119 = ORIENTED_EDGE('',*,*,#46120,.F.); +#46120 = EDGE_CURVE('',#46121,#46113,#46123,.T.); +#46121 = VERTEX_POINT('',#46122); +#46122 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#46123 = LINE('',#46124,#46125); +#46124 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#46125 = VECTOR('',#46126,1.); +#46126 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46127 = ORIENTED_EDGE('',*,*,#46128,.T.); +#46128 = EDGE_CURVE('',#46121,#46096,#46129,.T.); +#46129 = LINE('',#46130,#46131); +#46130 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#46131 = VECTOR('',#46132,1.); +#46132 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46133 = PLANE('',#46134); +#46134 = AXIS2_PLACEMENT_3D('',#46135,#46136,#46137); +#46135 = CARTESIAN_POINT('',(-0.1,-16.,2.448597401424)); +#46136 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46137 = DIRECTION('',(0.,0.,1.)); +#46138 = ADVANCED_FACE('',(#46139),#46150,.T.); +#46139 = FACE_BOUND('',#46140,.T.); +#46140 = EDGE_LOOP('',(#46141,#46142,#46143,#46149)); +#46141 = ORIENTED_EDGE('',*,*,#44368,.F.); +#46142 = ORIENTED_EDGE('',*,*,#44378,.T.); +#46143 = ORIENTED_EDGE('',*,*,#46144,.T.); +#46144 = EDGE_CURVE('',#44379,#44419,#46145,.T.); +#46145 = LINE('',#46146,#46147); +#46146 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#46147 = VECTOR('',#46148,1.); +#46148 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46149 = ORIENTED_EDGE('',*,*,#44426,.T.); +#46150 = PLANE('',#46151); +#46151 = AXIS2_PLACEMENT_3D('',#46152,#46153,#46154); +#46152 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#46153 = DIRECTION('',(0.,-0.,-1.)); +#46154 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46155 = ADVANCED_FACE('',(#46156),#46197,.F.); +#46156 = FACE_BOUND('',#46157,.F.); +#46157 = EDGE_LOOP('',(#46158,#46166,#46167,#46175,#46183,#46191)); +#46158 = ORIENTED_EDGE('',*,*,#46159,.T.); +#46159 = EDGE_CURVE('',#46160,#44419,#46162,.T.); +#46160 = VERTEX_POINT('',#46161); +#46161 = CARTESIAN_POINT('',(0.1,-14.3,-2.1)); +#46162 = LINE('',#46163,#46164); +#46163 = CARTESIAN_POINT('',(0.1,-14.3,-2.1)); +#46164 = VECTOR('',#46165,1.); +#46165 = DIRECTION('',(0.,0.,1.)); +#46166 = ORIENTED_EDGE('',*,*,#44418,.F.); +#46167 = ORIENTED_EDGE('',*,*,#46168,.T.); +#46168 = EDGE_CURVE('',#44411,#46169,#46171,.T.); +#46169 = VERTEX_POINT('',#46170); +#46170 = CARTESIAN_POINT('',(0.1,-13.7,-2.1)); +#46171 = LINE('',#46172,#46173); +#46172 = CARTESIAN_POINT('',(0.1,-13.7,0.2)); +#46173 = VECTOR('',#46174,1.); +#46174 = DIRECTION('',(0.,0.,-1.)); +#46175 = ORIENTED_EDGE('',*,*,#46176,.T.); +#46176 = EDGE_CURVE('',#46169,#46177,#46179,.T.); +#46177 = VERTEX_POINT('',#46178); +#46178 = CARTESIAN_POINT('',(0.1,-13.85,-2.7)); +#46179 = LINE('',#46180,#46181); +#46180 = CARTESIAN_POINT('',(0.1,-13.7,-2.1)); +#46181 = VECTOR('',#46182,1.); +#46182 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46183 = ORIENTED_EDGE('',*,*,#46184,.T.); +#46184 = EDGE_CURVE('',#46177,#46185,#46187,.T.); +#46185 = VERTEX_POINT('',#46186); +#46186 = CARTESIAN_POINT('',(0.1,-14.15,-2.7)); +#46187 = LINE('',#46188,#46189); +#46188 = CARTESIAN_POINT('',(0.1,-13.85,-2.7)); +#46189 = VECTOR('',#46190,1.); +#46190 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46191 = ORIENTED_EDGE('',*,*,#46192,.T.); +#46192 = EDGE_CURVE('',#46185,#46160,#46193,.T.); +#46193 = LINE('',#46194,#46195); +#46194 = CARTESIAN_POINT('',(0.1,-14.15,-2.7)); +#46195 = VECTOR('',#46196,1.); +#46196 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46197 = PLANE('',#46198); +#46198 = AXIS2_PLACEMENT_3D('',#46199,#46200,#46201); +#46199 = CARTESIAN_POINT('',(0.1,-14.,2.448597401424)); +#46200 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46201 = DIRECTION('',(0.,0.,1.)); +#46202 = ADVANCED_FACE('',(#46203),#46214,.T.); +#46203 = FACE_BOUND('',#46204,.T.); +#46204 = EDGE_LOOP('',(#46205,#46211,#46212,#46213)); +#46205 = ORIENTED_EDGE('',*,*,#46206,.F.); +#46206 = EDGE_CURVE('',#44387,#44411,#46207,.T.); +#46207 = LINE('',#46208,#46209); +#46208 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#46209 = VECTOR('',#46210,1.); +#46210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46211 = ORIENTED_EDGE('',*,*,#44394,.T.); +#46212 = ORIENTED_EDGE('',*,*,#44402,.T.); +#46213 = ORIENTED_EDGE('',*,*,#44410,.T.); +#46214 = PLANE('',#46215); +#46215 = AXIS2_PLACEMENT_3D('',#46216,#46217,#46218); +#46216 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#46217 = DIRECTION('',(0.,-0.,-1.)); +#46218 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46219 = ADVANCED_FACE('',(#46220),#46261,.T.); +#46220 = FACE_BOUND('',#46221,.T.); +#46221 = EDGE_LOOP('',(#46222,#46230,#46231,#46239,#46247,#46255)); +#46222 = ORIENTED_EDGE('',*,*,#46223,.T.); +#46223 = EDGE_CURVE('',#46224,#44379,#46226,.T.); +#46224 = VERTEX_POINT('',#46225); +#46225 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#46226 = LINE('',#46227,#46228); +#46227 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#46228 = VECTOR('',#46229,1.); +#46229 = DIRECTION('',(0.,0.,1.)); +#46230 = ORIENTED_EDGE('',*,*,#44386,.F.); +#46231 = ORIENTED_EDGE('',*,*,#46232,.T.); +#46232 = EDGE_CURVE('',#44387,#46233,#46235,.T.); +#46233 = VERTEX_POINT('',#46234); +#46234 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#46235 = LINE('',#46236,#46237); +#46236 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#46237 = VECTOR('',#46238,1.); +#46238 = DIRECTION('',(0.,0.,-1.)); +#46239 = ORIENTED_EDGE('',*,*,#46240,.T.); +#46240 = EDGE_CURVE('',#46233,#46241,#46243,.T.); +#46241 = VERTEX_POINT('',#46242); +#46242 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#46243 = LINE('',#46244,#46245); +#46244 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#46245 = VECTOR('',#46246,1.); +#46246 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46247 = ORIENTED_EDGE('',*,*,#46248,.F.); +#46248 = EDGE_CURVE('',#46249,#46241,#46251,.T.); +#46249 = VERTEX_POINT('',#46250); +#46250 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#46251 = LINE('',#46252,#46253); +#46252 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#46253 = VECTOR('',#46254,1.); +#46254 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46255 = ORIENTED_EDGE('',*,*,#46256,.T.); +#46256 = EDGE_CURVE('',#46249,#46224,#46257,.T.); +#46257 = LINE('',#46258,#46259); +#46258 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#46259 = VECTOR('',#46260,1.); +#46260 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46261 = PLANE('',#46262); +#46262 = AXIS2_PLACEMENT_3D('',#46263,#46264,#46265); +#46263 = CARTESIAN_POINT('',(-0.1,-14.,2.448597401424)); +#46264 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46265 = DIRECTION('',(0.,0.,1.)); +#46266 = ADVANCED_FACE('',(#46267),#46278,.T.); +#46267 = FACE_BOUND('',#46268,.T.); +#46268 = EDGE_LOOP('',(#46269,#46270,#46271,#46277)); +#46269 = ORIENTED_EDGE('',*,*,#44434,.F.); +#46270 = ORIENTED_EDGE('',*,*,#44444,.T.); +#46271 = ORIENTED_EDGE('',*,*,#46272,.T.); +#46272 = EDGE_CURVE('',#44445,#44485,#46273,.T.); +#46273 = LINE('',#46274,#46275); +#46274 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#46275 = VECTOR('',#46276,1.); +#46276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46277 = ORIENTED_EDGE('',*,*,#44492,.T.); +#46278 = PLANE('',#46279); +#46279 = AXIS2_PLACEMENT_3D('',#46280,#46281,#46282); +#46280 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#46281 = DIRECTION('',(0.,-0.,-1.)); +#46282 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46283 = ADVANCED_FACE('',(#46284),#46325,.F.); +#46284 = FACE_BOUND('',#46285,.F.); +#46285 = EDGE_LOOP('',(#46286,#46294,#46295,#46303,#46311,#46319)); +#46286 = ORIENTED_EDGE('',*,*,#46287,.T.); +#46287 = EDGE_CURVE('',#46288,#44485,#46290,.T.); +#46288 = VERTEX_POINT('',#46289); +#46289 = CARTESIAN_POINT('',(0.1,-12.3,-2.1)); +#46290 = LINE('',#46291,#46292); +#46291 = CARTESIAN_POINT('',(0.1,-12.3,-2.1)); +#46292 = VECTOR('',#46293,1.); +#46293 = DIRECTION('',(0.,0.,1.)); +#46294 = ORIENTED_EDGE('',*,*,#44484,.F.); +#46295 = ORIENTED_EDGE('',*,*,#46296,.T.); +#46296 = EDGE_CURVE('',#44477,#46297,#46299,.T.); +#46297 = VERTEX_POINT('',#46298); +#46298 = CARTESIAN_POINT('',(0.1,-11.7,-2.1)); +#46299 = LINE('',#46300,#46301); +#46300 = CARTESIAN_POINT('',(0.1,-11.7,0.2)); +#46301 = VECTOR('',#46302,1.); +#46302 = DIRECTION('',(0.,0.,-1.)); +#46303 = ORIENTED_EDGE('',*,*,#46304,.T.); +#46304 = EDGE_CURVE('',#46297,#46305,#46307,.T.); +#46305 = VERTEX_POINT('',#46306); +#46306 = CARTESIAN_POINT('',(0.1,-11.85,-2.7)); +#46307 = LINE('',#46308,#46309); +#46308 = CARTESIAN_POINT('',(0.1,-11.7,-2.1)); +#46309 = VECTOR('',#46310,1.); +#46310 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46311 = ORIENTED_EDGE('',*,*,#46312,.T.); +#46312 = EDGE_CURVE('',#46305,#46313,#46315,.T.); +#46313 = VERTEX_POINT('',#46314); +#46314 = CARTESIAN_POINT('',(0.1,-12.15,-2.7)); +#46315 = LINE('',#46316,#46317); +#46316 = CARTESIAN_POINT('',(0.1,-11.85,-2.7)); +#46317 = VECTOR('',#46318,1.); +#46318 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46319 = ORIENTED_EDGE('',*,*,#46320,.T.); +#46320 = EDGE_CURVE('',#46313,#46288,#46321,.T.); +#46321 = LINE('',#46322,#46323); +#46322 = CARTESIAN_POINT('',(0.1,-12.15,-2.7)); +#46323 = VECTOR('',#46324,1.); +#46324 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46325 = PLANE('',#46326); +#46326 = AXIS2_PLACEMENT_3D('',#46327,#46328,#46329); +#46327 = CARTESIAN_POINT('',(0.1,-12.,2.448597401424)); +#46328 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46329 = DIRECTION('',(0.,0.,1.)); +#46330 = ADVANCED_FACE('',(#46331),#46342,.T.); +#46331 = FACE_BOUND('',#46332,.T.); +#46332 = EDGE_LOOP('',(#46333,#46339,#46340,#46341)); +#46333 = ORIENTED_EDGE('',*,*,#46334,.F.); +#46334 = EDGE_CURVE('',#44453,#44477,#46335,.T.); +#46335 = LINE('',#46336,#46337); +#46336 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#46337 = VECTOR('',#46338,1.); +#46338 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46339 = ORIENTED_EDGE('',*,*,#44460,.T.); +#46340 = ORIENTED_EDGE('',*,*,#44468,.T.); +#46341 = ORIENTED_EDGE('',*,*,#44476,.T.); +#46342 = PLANE('',#46343); +#46343 = AXIS2_PLACEMENT_3D('',#46344,#46345,#46346); +#46344 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#46345 = DIRECTION('',(0.,-0.,-1.)); +#46346 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46347 = ADVANCED_FACE('',(#46348),#46389,.T.); +#46348 = FACE_BOUND('',#46349,.T.); +#46349 = EDGE_LOOP('',(#46350,#46358,#46359,#46367,#46375,#46383)); +#46350 = ORIENTED_EDGE('',*,*,#46351,.T.); +#46351 = EDGE_CURVE('',#46352,#44445,#46354,.T.); +#46352 = VERTEX_POINT('',#46353); +#46353 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#46354 = LINE('',#46355,#46356); +#46355 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#46356 = VECTOR('',#46357,1.); +#46357 = DIRECTION('',(0.,0.,1.)); +#46358 = ORIENTED_EDGE('',*,*,#44452,.F.); +#46359 = ORIENTED_EDGE('',*,*,#46360,.T.); +#46360 = EDGE_CURVE('',#44453,#46361,#46363,.T.); +#46361 = VERTEX_POINT('',#46362); +#46362 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#46363 = LINE('',#46364,#46365); +#46364 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#46365 = VECTOR('',#46366,1.); +#46366 = DIRECTION('',(0.,0.,-1.)); +#46367 = ORIENTED_EDGE('',*,*,#46368,.T.); +#46368 = EDGE_CURVE('',#46361,#46369,#46371,.T.); +#46369 = VERTEX_POINT('',#46370); +#46370 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#46371 = LINE('',#46372,#46373); +#46372 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#46373 = VECTOR('',#46374,1.); +#46374 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46375 = ORIENTED_EDGE('',*,*,#46376,.F.); +#46376 = EDGE_CURVE('',#46377,#46369,#46379,.T.); +#46377 = VERTEX_POINT('',#46378); +#46378 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#46379 = LINE('',#46380,#46381); +#46380 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#46381 = VECTOR('',#46382,1.); +#46382 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46383 = ORIENTED_EDGE('',*,*,#46384,.T.); +#46384 = EDGE_CURVE('',#46377,#46352,#46385,.T.); +#46385 = LINE('',#46386,#46387); +#46386 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#46387 = VECTOR('',#46388,1.); +#46388 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46389 = PLANE('',#46390); +#46390 = AXIS2_PLACEMENT_3D('',#46391,#46392,#46393); +#46391 = CARTESIAN_POINT('',(-0.1,-12.,2.448597401424)); +#46392 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46393 = DIRECTION('',(0.,0.,1.)); +#46394 = ADVANCED_FACE('',(#46395),#46406,.T.); +#46395 = FACE_BOUND('',#46396,.T.); +#46396 = EDGE_LOOP('',(#46397,#46398,#46399,#46405)); +#46397 = ORIENTED_EDGE('',*,*,#44500,.F.); +#46398 = ORIENTED_EDGE('',*,*,#44510,.T.); +#46399 = ORIENTED_EDGE('',*,*,#46400,.T.); +#46400 = EDGE_CURVE('',#44511,#44551,#46401,.T.); +#46401 = LINE('',#46402,#46403); +#46402 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#46403 = VECTOR('',#46404,1.); +#46404 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46405 = ORIENTED_EDGE('',*,*,#44558,.T.); +#46406 = PLANE('',#46407); +#46407 = AXIS2_PLACEMENT_3D('',#46408,#46409,#46410); +#46408 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#46409 = DIRECTION('',(0.,-0.,-1.)); +#46410 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46411 = ADVANCED_FACE('',(#46412),#46453,.F.); +#46412 = FACE_BOUND('',#46413,.F.); +#46413 = EDGE_LOOP('',(#46414,#46422,#46423,#46431,#46439,#46447)); +#46414 = ORIENTED_EDGE('',*,*,#46415,.T.); +#46415 = EDGE_CURVE('',#46416,#44551,#46418,.T.); +#46416 = VERTEX_POINT('',#46417); +#46417 = CARTESIAN_POINT('',(0.1,-10.3,-2.1)); +#46418 = LINE('',#46419,#46420); +#46419 = CARTESIAN_POINT('',(0.1,-10.3,-2.1)); +#46420 = VECTOR('',#46421,1.); +#46421 = DIRECTION('',(0.,0.,1.)); +#46422 = ORIENTED_EDGE('',*,*,#44550,.F.); +#46423 = ORIENTED_EDGE('',*,*,#46424,.T.); +#46424 = EDGE_CURVE('',#44543,#46425,#46427,.T.); +#46425 = VERTEX_POINT('',#46426); +#46426 = CARTESIAN_POINT('',(0.1,-9.7,-2.1)); +#46427 = LINE('',#46428,#46429); +#46428 = CARTESIAN_POINT('',(0.1,-9.7,0.2)); +#46429 = VECTOR('',#46430,1.); +#46430 = DIRECTION('',(0.,0.,-1.)); +#46431 = ORIENTED_EDGE('',*,*,#46432,.T.); +#46432 = EDGE_CURVE('',#46425,#46433,#46435,.T.); +#46433 = VERTEX_POINT('',#46434); +#46434 = CARTESIAN_POINT('',(0.1,-9.85,-2.7)); +#46435 = LINE('',#46436,#46437); +#46436 = CARTESIAN_POINT('',(0.1,-9.7,-2.1)); +#46437 = VECTOR('',#46438,1.); +#46438 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46439 = ORIENTED_EDGE('',*,*,#46440,.T.); +#46440 = EDGE_CURVE('',#46433,#46441,#46443,.T.); +#46441 = VERTEX_POINT('',#46442); +#46442 = CARTESIAN_POINT('',(0.1,-10.15,-2.7)); +#46443 = LINE('',#46444,#46445); +#46444 = CARTESIAN_POINT('',(0.1,-9.85,-2.7)); +#46445 = VECTOR('',#46446,1.); +#46446 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46447 = ORIENTED_EDGE('',*,*,#46448,.T.); +#46448 = EDGE_CURVE('',#46441,#46416,#46449,.T.); +#46449 = LINE('',#46450,#46451); +#46450 = CARTESIAN_POINT('',(0.1,-10.15,-2.7)); +#46451 = VECTOR('',#46452,1.); +#46452 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46453 = PLANE('',#46454); +#46454 = AXIS2_PLACEMENT_3D('',#46455,#46456,#46457); +#46455 = CARTESIAN_POINT('',(0.1,-10.,2.448597401424)); +#46456 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46457 = DIRECTION('',(0.,0.,1.)); +#46458 = ADVANCED_FACE('',(#46459),#46470,.T.); +#46459 = FACE_BOUND('',#46460,.T.); +#46460 = EDGE_LOOP('',(#46461,#46467,#46468,#46469)); +#46461 = ORIENTED_EDGE('',*,*,#46462,.F.); +#46462 = EDGE_CURVE('',#44519,#44543,#46463,.T.); +#46463 = LINE('',#46464,#46465); +#46464 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#46465 = VECTOR('',#46466,1.); +#46466 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46467 = ORIENTED_EDGE('',*,*,#44526,.T.); +#46468 = ORIENTED_EDGE('',*,*,#44534,.T.); +#46469 = ORIENTED_EDGE('',*,*,#44542,.T.); +#46470 = PLANE('',#46471); +#46471 = AXIS2_PLACEMENT_3D('',#46472,#46473,#46474); +#46472 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#46473 = DIRECTION('',(0.,-0.,-1.)); +#46474 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46475 = ADVANCED_FACE('',(#46476),#46517,.T.); +#46476 = FACE_BOUND('',#46477,.T.); +#46477 = EDGE_LOOP('',(#46478,#46486,#46487,#46495,#46503,#46511)); +#46478 = ORIENTED_EDGE('',*,*,#46479,.T.); +#46479 = EDGE_CURVE('',#46480,#44511,#46482,.T.); +#46480 = VERTEX_POINT('',#46481); +#46481 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#46482 = LINE('',#46483,#46484); +#46483 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#46484 = VECTOR('',#46485,1.); +#46485 = DIRECTION('',(0.,0.,1.)); +#46486 = ORIENTED_EDGE('',*,*,#44518,.F.); +#46487 = ORIENTED_EDGE('',*,*,#46488,.T.); +#46488 = EDGE_CURVE('',#44519,#46489,#46491,.T.); +#46489 = VERTEX_POINT('',#46490); +#46490 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#46491 = LINE('',#46492,#46493); +#46492 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#46493 = VECTOR('',#46494,1.); +#46494 = DIRECTION('',(0.,0.,-1.)); +#46495 = ORIENTED_EDGE('',*,*,#46496,.T.); +#46496 = EDGE_CURVE('',#46489,#46497,#46499,.T.); +#46497 = VERTEX_POINT('',#46498); +#46498 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#46499 = LINE('',#46500,#46501); +#46500 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#46501 = VECTOR('',#46502,1.); +#46502 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46503 = ORIENTED_EDGE('',*,*,#46504,.F.); +#46504 = EDGE_CURVE('',#46505,#46497,#46507,.T.); +#46505 = VERTEX_POINT('',#46506); +#46506 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#46507 = LINE('',#46508,#46509); +#46508 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#46509 = VECTOR('',#46510,1.); +#46510 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46511 = ORIENTED_EDGE('',*,*,#46512,.T.); +#46512 = EDGE_CURVE('',#46505,#46480,#46513,.T.); +#46513 = LINE('',#46514,#46515); +#46514 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#46515 = VECTOR('',#46516,1.); +#46516 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46517 = PLANE('',#46518); +#46518 = AXIS2_PLACEMENT_3D('',#46519,#46520,#46521); +#46519 = CARTESIAN_POINT('',(-0.1,-10.,2.448597401424)); +#46520 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46521 = DIRECTION('',(0.,0.,1.)); +#46522 = ADVANCED_FACE('',(#46523),#46534,.T.); +#46523 = FACE_BOUND('',#46524,.T.); +#46524 = EDGE_LOOP('',(#46525,#46526,#46527,#46533)); +#46525 = ORIENTED_EDGE('',*,*,#44566,.F.); +#46526 = ORIENTED_EDGE('',*,*,#44576,.T.); +#46527 = ORIENTED_EDGE('',*,*,#46528,.T.); +#46528 = EDGE_CURVE('',#44577,#44617,#46529,.T.); +#46529 = LINE('',#46530,#46531); +#46530 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#46531 = VECTOR('',#46532,1.); +#46532 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46533 = ORIENTED_EDGE('',*,*,#44624,.T.); +#46534 = PLANE('',#46535); +#46535 = AXIS2_PLACEMENT_3D('',#46536,#46537,#46538); +#46536 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#46537 = DIRECTION('',(0.,-0.,-1.)); +#46538 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46539 = ADVANCED_FACE('',(#46540),#46581,.F.); +#46540 = FACE_BOUND('',#46541,.F.); +#46541 = EDGE_LOOP('',(#46542,#46550,#46551,#46559,#46567,#46575)); +#46542 = ORIENTED_EDGE('',*,*,#46543,.T.); +#46543 = EDGE_CURVE('',#46544,#44617,#46546,.T.); +#46544 = VERTEX_POINT('',#46545); +#46545 = CARTESIAN_POINT('',(0.1,-8.3,-2.1)); +#46546 = LINE('',#46547,#46548); +#46547 = CARTESIAN_POINT('',(0.1,-8.3,-2.1)); +#46548 = VECTOR('',#46549,1.); +#46549 = DIRECTION('',(0.,0.,1.)); +#46550 = ORIENTED_EDGE('',*,*,#44616,.F.); +#46551 = ORIENTED_EDGE('',*,*,#46552,.T.); +#46552 = EDGE_CURVE('',#44609,#46553,#46555,.T.); +#46553 = VERTEX_POINT('',#46554); +#46554 = CARTESIAN_POINT('',(0.1,-7.7,-2.1)); +#46555 = LINE('',#46556,#46557); +#46556 = CARTESIAN_POINT('',(0.1,-7.7,0.2)); +#46557 = VECTOR('',#46558,1.); +#46558 = DIRECTION('',(0.,0.,-1.)); +#46559 = ORIENTED_EDGE('',*,*,#46560,.T.); +#46560 = EDGE_CURVE('',#46553,#46561,#46563,.T.); +#46561 = VERTEX_POINT('',#46562); +#46562 = CARTESIAN_POINT('',(0.1,-7.85,-2.7)); +#46563 = LINE('',#46564,#46565); +#46564 = CARTESIAN_POINT('',(0.1,-7.7,-2.1)); +#46565 = VECTOR('',#46566,1.); +#46566 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46567 = ORIENTED_EDGE('',*,*,#46568,.T.); +#46568 = EDGE_CURVE('',#46561,#46569,#46571,.T.); +#46569 = VERTEX_POINT('',#46570); +#46570 = CARTESIAN_POINT('',(0.1,-8.15,-2.7)); +#46571 = LINE('',#46572,#46573); +#46572 = CARTESIAN_POINT('',(0.1,-7.85,-2.7)); +#46573 = VECTOR('',#46574,1.); +#46574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46575 = ORIENTED_EDGE('',*,*,#46576,.T.); +#46576 = EDGE_CURVE('',#46569,#46544,#46577,.T.); +#46577 = LINE('',#46578,#46579); +#46578 = CARTESIAN_POINT('',(0.1,-8.15,-2.7)); +#46579 = VECTOR('',#46580,1.); +#46580 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46581 = PLANE('',#46582); +#46582 = AXIS2_PLACEMENT_3D('',#46583,#46584,#46585); +#46583 = CARTESIAN_POINT('',(0.1,-8.,2.448597401424)); +#46584 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46585 = DIRECTION('',(0.,0.,1.)); +#46586 = ADVANCED_FACE('',(#46587),#46598,.T.); +#46587 = FACE_BOUND('',#46588,.T.); +#46588 = EDGE_LOOP('',(#46589,#46595,#46596,#46597)); +#46589 = ORIENTED_EDGE('',*,*,#46590,.F.); +#46590 = EDGE_CURVE('',#44585,#44609,#46591,.T.); +#46591 = LINE('',#46592,#46593); +#46592 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#46593 = VECTOR('',#46594,1.); +#46594 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46595 = ORIENTED_EDGE('',*,*,#44592,.T.); +#46596 = ORIENTED_EDGE('',*,*,#44600,.T.); +#46597 = ORIENTED_EDGE('',*,*,#44608,.T.); +#46598 = PLANE('',#46599); +#46599 = AXIS2_PLACEMENT_3D('',#46600,#46601,#46602); +#46600 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#46601 = DIRECTION('',(0.,-0.,-1.)); +#46602 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46603 = ADVANCED_FACE('',(#46604),#46645,.T.); +#46604 = FACE_BOUND('',#46605,.T.); +#46605 = EDGE_LOOP('',(#46606,#46614,#46615,#46623,#46631,#46639)); +#46606 = ORIENTED_EDGE('',*,*,#46607,.T.); +#46607 = EDGE_CURVE('',#46608,#44577,#46610,.T.); +#46608 = VERTEX_POINT('',#46609); +#46609 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#46610 = LINE('',#46611,#46612); +#46611 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#46612 = VECTOR('',#46613,1.); +#46613 = DIRECTION('',(0.,0.,1.)); +#46614 = ORIENTED_EDGE('',*,*,#44584,.F.); +#46615 = ORIENTED_EDGE('',*,*,#46616,.T.); +#46616 = EDGE_CURVE('',#44585,#46617,#46619,.T.); +#46617 = VERTEX_POINT('',#46618); +#46618 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#46619 = LINE('',#46620,#46621); +#46620 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#46621 = VECTOR('',#46622,1.); +#46622 = DIRECTION('',(0.,0.,-1.)); +#46623 = ORIENTED_EDGE('',*,*,#46624,.T.); +#46624 = EDGE_CURVE('',#46617,#46625,#46627,.T.); +#46625 = VERTEX_POINT('',#46626); +#46626 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#46627 = LINE('',#46628,#46629); +#46628 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#46629 = VECTOR('',#46630,1.); +#46630 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46631 = ORIENTED_EDGE('',*,*,#46632,.F.); +#46632 = EDGE_CURVE('',#46633,#46625,#46635,.T.); +#46633 = VERTEX_POINT('',#46634); +#46634 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#46635 = LINE('',#46636,#46637); +#46636 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#46637 = VECTOR('',#46638,1.); +#46638 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46639 = ORIENTED_EDGE('',*,*,#46640,.T.); +#46640 = EDGE_CURVE('',#46633,#46608,#46641,.T.); +#46641 = LINE('',#46642,#46643); +#46642 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#46643 = VECTOR('',#46644,1.); +#46644 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46645 = PLANE('',#46646); +#46646 = AXIS2_PLACEMENT_3D('',#46647,#46648,#46649); +#46647 = CARTESIAN_POINT('',(-0.1,-8.,2.448597401424)); +#46648 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46649 = DIRECTION('',(0.,0.,1.)); +#46650 = ADVANCED_FACE('',(#46651),#46662,.T.); +#46651 = FACE_BOUND('',#46652,.T.); +#46652 = EDGE_LOOP('',(#46653,#46654,#46655,#46661)); +#46653 = ORIENTED_EDGE('',*,*,#44632,.F.); +#46654 = ORIENTED_EDGE('',*,*,#44642,.T.); +#46655 = ORIENTED_EDGE('',*,*,#46656,.T.); +#46656 = EDGE_CURVE('',#44643,#44683,#46657,.T.); +#46657 = LINE('',#46658,#46659); +#46658 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#46659 = VECTOR('',#46660,1.); +#46660 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46661 = ORIENTED_EDGE('',*,*,#44690,.T.); +#46662 = PLANE('',#46663); +#46663 = AXIS2_PLACEMENT_3D('',#46664,#46665,#46666); +#46664 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#46665 = DIRECTION('',(0.,-0.,-1.)); +#46666 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46667 = ADVANCED_FACE('',(#46668),#46709,.F.); +#46668 = FACE_BOUND('',#46669,.F.); +#46669 = EDGE_LOOP('',(#46670,#46678,#46679,#46687,#46695,#46703)); +#46670 = ORIENTED_EDGE('',*,*,#46671,.T.); +#46671 = EDGE_CURVE('',#46672,#44683,#46674,.T.); +#46672 = VERTEX_POINT('',#46673); +#46673 = CARTESIAN_POINT('',(0.1,-6.3,-2.1)); +#46674 = LINE('',#46675,#46676); +#46675 = CARTESIAN_POINT('',(0.1,-6.3,-2.1)); +#46676 = VECTOR('',#46677,1.); +#46677 = DIRECTION('',(0.,0.,1.)); +#46678 = ORIENTED_EDGE('',*,*,#44682,.F.); +#46679 = ORIENTED_EDGE('',*,*,#46680,.T.); +#46680 = EDGE_CURVE('',#44675,#46681,#46683,.T.); +#46681 = VERTEX_POINT('',#46682); +#46682 = CARTESIAN_POINT('',(0.1,-5.7,-2.1)); +#46683 = LINE('',#46684,#46685); +#46684 = CARTESIAN_POINT('',(0.1,-5.7,0.2)); +#46685 = VECTOR('',#46686,1.); +#46686 = DIRECTION('',(0.,0.,-1.)); +#46687 = ORIENTED_EDGE('',*,*,#46688,.T.); +#46688 = EDGE_CURVE('',#46681,#46689,#46691,.T.); +#46689 = VERTEX_POINT('',#46690); +#46690 = CARTESIAN_POINT('',(0.1,-5.85,-2.7)); +#46691 = LINE('',#46692,#46693); +#46692 = CARTESIAN_POINT('',(0.1,-5.7,-2.1)); +#46693 = VECTOR('',#46694,1.); +#46694 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46695 = ORIENTED_EDGE('',*,*,#46696,.T.); +#46696 = EDGE_CURVE('',#46689,#46697,#46699,.T.); +#46697 = VERTEX_POINT('',#46698); +#46698 = CARTESIAN_POINT('',(0.1,-6.15,-2.7)); +#46699 = LINE('',#46700,#46701); +#46700 = CARTESIAN_POINT('',(0.1,-5.85,-2.7)); +#46701 = VECTOR('',#46702,1.); +#46702 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46703 = ORIENTED_EDGE('',*,*,#46704,.T.); +#46704 = EDGE_CURVE('',#46697,#46672,#46705,.T.); +#46705 = LINE('',#46706,#46707); +#46706 = CARTESIAN_POINT('',(0.1,-6.15,-2.7)); +#46707 = VECTOR('',#46708,1.); +#46708 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46709 = PLANE('',#46710); +#46710 = AXIS2_PLACEMENT_3D('',#46711,#46712,#46713); +#46711 = CARTESIAN_POINT('',(0.1,-6.,2.448597401424)); +#46712 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46713 = DIRECTION('',(0.,0.,1.)); +#46714 = ADVANCED_FACE('',(#46715),#46726,.T.); +#46715 = FACE_BOUND('',#46716,.T.); +#46716 = EDGE_LOOP('',(#46717,#46723,#46724,#46725)); +#46717 = ORIENTED_EDGE('',*,*,#46718,.F.); +#46718 = EDGE_CURVE('',#44651,#44675,#46719,.T.); +#46719 = LINE('',#46720,#46721); +#46720 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#46721 = VECTOR('',#46722,1.); +#46722 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46723 = ORIENTED_EDGE('',*,*,#44658,.T.); +#46724 = ORIENTED_EDGE('',*,*,#44666,.T.); +#46725 = ORIENTED_EDGE('',*,*,#44674,.T.); +#46726 = PLANE('',#46727); +#46727 = AXIS2_PLACEMENT_3D('',#46728,#46729,#46730); +#46728 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#46729 = DIRECTION('',(0.,-0.,-1.)); +#46730 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46731 = ADVANCED_FACE('',(#46732),#46773,.T.); +#46732 = FACE_BOUND('',#46733,.T.); +#46733 = EDGE_LOOP('',(#46734,#46742,#46743,#46751,#46759,#46767)); +#46734 = ORIENTED_EDGE('',*,*,#46735,.T.); +#46735 = EDGE_CURVE('',#46736,#44643,#46738,.T.); +#46736 = VERTEX_POINT('',#46737); +#46737 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#46738 = LINE('',#46739,#46740); +#46739 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#46740 = VECTOR('',#46741,1.); +#46741 = DIRECTION('',(0.,0.,1.)); +#46742 = ORIENTED_EDGE('',*,*,#44650,.F.); +#46743 = ORIENTED_EDGE('',*,*,#46744,.T.); +#46744 = EDGE_CURVE('',#44651,#46745,#46747,.T.); +#46745 = VERTEX_POINT('',#46746); +#46746 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#46747 = LINE('',#46748,#46749); +#46748 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#46749 = VECTOR('',#46750,1.); +#46750 = DIRECTION('',(0.,0.,-1.)); +#46751 = ORIENTED_EDGE('',*,*,#46752,.T.); +#46752 = EDGE_CURVE('',#46745,#46753,#46755,.T.); +#46753 = VERTEX_POINT('',#46754); +#46754 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#46755 = LINE('',#46756,#46757); +#46756 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#46757 = VECTOR('',#46758,1.); +#46758 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46759 = ORIENTED_EDGE('',*,*,#46760,.F.); +#46760 = EDGE_CURVE('',#46761,#46753,#46763,.T.); +#46761 = VERTEX_POINT('',#46762); +#46762 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#46763 = LINE('',#46764,#46765); +#46764 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#46765 = VECTOR('',#46766,1.); +#46766 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46767 = ORIENTED_EDGE('',*,*,#46768,.T.); +#46768 = EDGE_CURVE('',#46761,#46736,#46769,.T.); +#46769 = LINE('',#46770,#46771); +#46770 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#46771 = VECTOR('',#46772,1.); +#46772 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46773 = PLANE('',#46774); +#46774 = AXIS2_PLACEMENT_3D('',#46775,#46776,#46777); +#46775 = CARTESIAN_POINT('',(-0.1,-6.,2.448597401424)); +#46776 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46777 = DIRECTION('',(0.,0.,1.)); +#46778 = ADVANCED_FACE('',(#46779),#46790,.T.); +#46779 = FACE_BOUND('',#46780,.T.); +#46780 = EDGE_LOOP('',(#46781,#46782,#46783,#46789)); +#46781 = ORIENTED_EDGE('',*,*,#44698,.F.); +#46782 = ORIENTED_EDGE('',*,*,#44708,.T.); +#46783 = ORIENTED_EDGE('',*,*,#46784,.T.); +#46784 = EDGE_CURVE('',#44709,#44749,#46785,.T.); +#46785 = LINE('',#46786,#46787); +#46786 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#46787 = VECTOR('',#46788,1.); +#46788 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46789 = ORIENTED_EDGE('',*,*,#44756,.T.); +#46790 = PLANE('',#46791); +#46791 = AXIS2_PLACEMENT_3D('',#46792,#46793,#46794); +#46792 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#46793 = DIRECTION('',(0.,-0.,-1.)); +#46794 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46795 = ADVANCED_FACE('',(#46796),#46837,.F.); +#46796 = FACE_BOUND('',#46797,.F.); +#46797 = EDGE_LOOP('',(#46798,#46806,#46807,#46815,#46823,#46831)); +#46798 = ORIENTED_EDGE('',*,*,#46799,.T.); +#46799 = EDGE_CURVE('',#46800,#44749,#46802,.T.); +#46800 = VERTEX_POINT('',#46801); +#46801 = CARTESIAN_POINT('',(0.1,-4.3,-2.1)); +#46802 = LINE('',#46803,#46804); +#46803 = CARTESIAN_POINT('',(0.1,-4.3,-2.1)); +#46804 = VECTOR('',#46805,1.); +#46805 = DIRECTION('',(0.,0.,1.)); +#46806 = ORIENTED_EDGE('',*,*,#44748,.F.); +#46807 = ORIENTED_EDGE('',*,*,#46808,.T.); +#46808 = EDGE_CURVE('',#44741,#46809,#46811,.T.); +#46809 = VERTEX_POINT('',#46810); +#46810 = CARTESIAN_POINT('',(0.1,-3.7,-2.1)); +#46811 = LINE('',#46812,#46813); +#46812 = CARTESIAN_POINT('',(0.1,-3.7,0.2)); +#46813 = VECTOR('',#46814,1.); +#46814 = DIRECTION('',(0.,0.,-1.)); +#46815 = ORIENTED_EDGE('',*,*,#46816,.T.); +#46816 = EDGE_CURVE('',#46809,#46817,#46819,.T.); +#46817 = VERTEX_POINT('',#46818); +#46818 = CARTESIAN_POINT('',(0.1,-3.85,-2.7)); +#46819 = LINE('',#46820,#46821); +#46820 = CARTESIAN_POINT('',(0.1,-3.7,-2.1)); +#46821 = VECTOR('',#46822,1.); +#46822 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46823 = ORIENTED_EDGE('',*,*,#46824,.T.); +#46824 = EDGE_CURVE('',#46817,#46825,#46827,.T.); +#46825 = VERTEX_POINT('',#46826); +#46826 = CARTESIAN_POINT('',(0.1,-4.15,-2.7)); +#46827 = LINE('',#46828,#46829); +#46828 = CARTESIAN_POINT('',(0.1,-3.85,-2.7)); +#46829 = VECTOR('',#46830,1.); +#46830 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46831 = ORIENTED_EDGE('',*,*,#46832,.T.); +#46832 = EDGE_CURVE('',#46825,#46800,#46833,.T.); +#46833 = LINE('',#46834,#46835); +#46834 = CARTESIAN_POINT('',(0.1,-4.15,-2.7)); +#46835 = VECTOR('',#46836,1.); +#46836 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46837 = PLANE('',#46838); +#46838 = AXIS2_PLACEMENT_3D('',#46839,#46840,#46841); +#46839 = CARTESIAN_POINT('',(0.1,-4.,2.448597401424)); +#46840 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46841 = DIRECTION('',(0.,0.,1.)); +#46842 = ADVANCED_FACE('',(#46843),#46854,.T.); +#46843 = FACE_BOUND('',#46844,.T.); +#46844 = EDGE_LOOP('',(#46845,#46851,#46852,#46853)); +#46845 = ORIENTED_EDGE('',*,*,#46846,.F.); +#46846 = EDGE_CURVE('',#44717,#44741,#46847,.T.); +#46847 = LINE('',#46848,#46849); +#46848 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#46849 = VECTOR('',#46850,1.); +#46850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46851 = ORIENTED_EDGE('',*,*,#44724,.T.); +#46852 = ORIENTED_EDGE('',*,*,#44732,.T.); +#46853 = ORIENTED_EDGE('',*,*,#44740,.T.); +#46854 = PLANE('',#46855); +#46855 = AXIS2_PLACEMENT_3D('',#46856,#46857,#46858); +#46856 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#46857 = DIRECTION('',(0.,-0.,-1.)); +#46858 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46859 = ADVANCED_FACE('',(#46860),#46901,.T.); +#46860 = FACE_BOUND('',#46861,.T.); +#46861 = EDGE_LOOP('',(#46862,#46870,#46871,#46879,#46887,#46895)); +#46862 = ORIENTED_EDGE('',*,*,#46863,.T.); +#46863 = EDGE_CURVE('',#46864,#44709,#46866,.T.); +#46864 = VERTEX_POINT('',#46865); +#46865 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#46866 = LINE('',#46867,#46868); +#46867 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#46868 = VECTOR('',#46869,1.); +#46869 = DIRECTION('',(0.,0.,1.)); +#46870 = ORIENTED_EDGE('',*,*,#44716,.F.); +#46871 = ORIENTED_EDGE('',*,*,#46872,.T.); +#46872 = EDGE_CURVE('',#44717,#46873,#46875,.T.); +#46873 = VERTEX_POINT('',#46874); +#46874 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#46875 = LINE('',#46876,#46877); +#46876 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#46877 = VECTOR('',#46878,1.); +#46878 = DIRECTION('',(0.,0.,-1.)); +#46879 = ORIENTED_EDGE('',*,*,#46880,.T.); +#46880 = EDGE_CURVE('',#46873,#46881,#46883,.T.); +#46881 = VERTEX_POINT('',#46882); +#46882 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#46883 = LINE('',#46884,#46885); +#46884 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#46885 = VECTOR('',#46886,1.); +#46886 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46887 = ORIENTED_EDGE('',*,*,#46888,.F.); +#46888 = EDGE_CURVE('',#46889,#46881,#46891,.T.); +#46889 = VERTEX_POINT('',#46890); +#46890 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#46891 = LINE('',#46892,#46893); +#46892 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#46893 = VECTOR('',#46894,1.); +#46894 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#46895 = ORIENTED_EDGE('',*,*,#46896,.T.); +#46896 = EDGE_CURVE('',#46889,#46864,#46897,.T.); +#46897 = LINE('',#46898,#46899); +#46898 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#46899 = VECTOR('',#46900,1.); +#46900 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46901 = PLANE('',#46902); +#46902 = AXIS2_PLACEMENT_3D('',#46903,#46904,#46905); +#46903 = CARTESIAN_POINT('',(-0.1,-4.,2.448597401424)); +#46904 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46905 = DIRECTION('',(0.,0.,1.)); +#46906 = ADVANCED_FACE('',(#46907),#46918,.T.); +#46907 = FACE_BOUND('',#46908,.T.); +#46908 = EDGE_LOOP('',(#46909,#46910,#46911,#46917)); +#46909 = ORIENTED_EDGE('',*,*,#44764,.F.); +#46910 = ORIENTED_EDGE('',*,*,#44774,.T.); +#46911 = ORIENTED_EDGE('',*,*,#46912,.T.); +#46912 = EDGE_CURVE('',#44775,#44815,#46913,.T.); +#46913 = LINE('',#46914,#46915); +#46914 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#46915 = VECTOR('',#46916,1.); +#46916 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46917 = ORIENTED_EDGE('',*,*,#44822,.T.); +#46918 = PLANE('',#46919); +#46919 = AXIS2_PLACEMENT_3D('',#46920,#46921,#46922); +#46920 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#46921 = DIRECTION('',(0.,-0.,-1.)); +#46922 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46923 = ADVANCED_FACE('',(#46924),#46965,.F.); +#46924 = FACE_BOUND('',#46925,.F.); +#46925 = EDGE_LOOP('',(#46926,#46934,#46935,#46943,#46951,#46959)); +#46926 = ORIENTED_EDGE('',*,*,#46927,.T.); +#46927 = EDGE_CURVE('',#46928,#44815,#46930,.T.); +#46928 = VERTEX_POINT('',#46929); +#46929 = CARTESIAN_POINT('',(0.1,-2.3,-2.1)); +#46930 = LINE('',#46931,#46932); +#46931 = CARTESIAN_POINT('',(0.1,-2.3,-2.1)); +#46932 = VECTOR('',#46933,1.); +#46933 = DIRECTION('',(0.,0.,1.)); +#46934 = ORIENTED_EDGE('',*,*,#44814,.F.); +#46935 = ORIENTED_EDGE('',*,*,#46936,.T.); +#46936 = EDGE_CURVE('',#44807,#46937,#46939,.T.); +#46937 = VERTEX_POINT('',#46938); +#46938 = CARTESIAN_POINT('',(0.1,-1.7,-2.1)); +#46939 = LINE('',#46940,#46941); +#46940 = CARTESIAN_POINT('',(0.1,-1.7,0.2)); +#46941 = VECTOR('',#46942,1.); +#46942 = DIRECTION('',(0.,0.,-1.)); +#46943 = ORIENTED_EDGE('',*,*,#46944,.T.); +#46944 = EDGE_CURVE('',#46937,#46945,#46947,.T.); +#46945 = VERTEX_POINT('',#46946); +#46946 = CARTESIAN_POINT('',(0.1,-1.85,-2.7)); +#46947 = LINE('',#46948,#46949); +#46948 = CARTESIAN_POINT('',(0.1,-1.7,-2.1)); +#46949 = VECTOR('',#46950,1.); +#46950 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#46951 = ORIENTED_EDGE('',*,*,#46952,.T.); +#46952 = EDGE_CURVE('',#46945,#46953,#46955,.T.); +#46953 = VERTEX_POINT('',#46954); +#46954 = CARTESIAN_POINT('',(0.1,-2.15,-2.7)); +#46955 = LINE('',#46956,#46957); +#46956 = CARTESIAN_POINT('',(0.1,-1.85,-2.7)); +#46957 = VECTOR('',#46958,1.); +#46958 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46959 = ORIENTED_EDGE('',*,*,#46960,.T.); +#46960 = EDGE_CURVE('',#46953,#46928,#46961,.T.); +#46961 = LINE('',#46962,#46963); +#46962 = CARTESIAN_POINT('',(0.1,-2.15,-2.7)); +#46963 = VECTOR('',#46964,1.); +#46964 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#46965 = PLANE('',#46966); +#46966 = AXIS2_PLACEMENT_3D('',#46967,#46968,#46969); +#46967 = CARTESIAN_POINT('',(0.1,-2.,2.448597401424)); +#46968 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#46969 = DIRECTION('',(0.,0.,1.)); +#46970 = ADVANCED_FACE('',(#46971),#46982,.T.); +#46971 = FACE_BOUND('',#46972,.T.); +#46972 = EDGE_LOOP('',(#46973,#46979,#46980,#46981)); +#46973 = ORIENTED_EDGE('',*,*,#46974,.F.); +#46974 = EDGE_CURVE('',#44783,#44807,#46975,.T.); +#46975 = LINE('',#46976,#46977); +#46976 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#46977 = VECTOR('',#46978,1.); +#46978 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#46979 = ORIENTED_EDGE('',*,*,#44790,.T.); +#46980 = ORIENTED_EDGE('',*,*,#44798,.T.); +#46981 = ORIENTED_EDGE('',*,*,#44806,.T.); +#46982 = PLANE('',#46983); +#46983 = AXIS2_PLACEMENT_3D('',#46984,#46985,#46986); +#46984 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#46985 = DIRECTION('',(0.,-0.,-1.)); +#46986 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#46987 = ADVANCED_FACE('',(#46988),#47029,.T.); +#46988 = FACE_BOUND('',#46989,.T.); +#46989 = EDGE_LOOP('',(#46990,#46998,#46999,#47007,#47015,#47023)); +#46990 = ORIENTED_EDGE('',*,*,#46991,.T.); +#46991 = EDGE_CURVE('',#46992,#44775,#46994,.T.); +#46992 = VERTEX_POINT('',#46993); +#46993 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#46994 = LINE('',#46995,#46996); +#46995 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#46996 = VECTOR('',#46997,1.); +#46997 = DIRECTION('',(0.,0.,1.)); +#46998 = ORIENTED_EDGE('',*,*,#44782,.F.); +#46999 = ORIENTED_EDGE('',*,*,#47000,.T.); +#47000 = EDGE_CURVE('',#44783,#47001,#47003,.T.); +#47001 = VERTEX_POINT('',#47002); +#47002 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#47003 = LINE('',#47004,#47005); +#47004 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#47005 = VECTOR('',#47006,1.); +#47006 = DIRECTION('',(0.,0.,-1.)); +#47007 = ORIENTED_EDGE('',*,*,#47008,.T.); +#47008 = EDGE_CURVE('',#47001,#47009,#47011,.T.); +#47009 = VERTEX_POINT('',#47010); +#47010 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#47011 = LINE('',#47012,#47013); +#47012 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#47013 = VECTOR('',#47014,1.); +#47014 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#47015 = ORIENTED_EDGE('',*,*,#47016,.F.); +#47016 = EDGE_CURVE('',#47017,#47009,#47019,.T.); +#47017 = VERTEX_POINT('',#47018); +#47018 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#47019 = LINE('',#47020,#47021); +#47020 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#47021 = VECTOR('',#47022,1.); +#47022 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47023 = ORIENTED_EDGE('',*,*,#47024,.T.); +#47024 = EDGE_CURVE('',#47017,#46992,#47025,.T.); +#47025 = LINE('',#47026,#47027); +#47026 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#47027 = VECTOR('',#47028,1.); +#47028 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#47029 = PLANE('',#47030); +#47030 = AXIS2_PLACEMENT_3D('',#47031,#47032,#47033); +#47031 = CARTESIAN_POINT('',(-0.1,-2.,2.448597401424)); +#47032 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47033 = DIRECTION('',(0.,0.,1.)); +#47034 = ADVANCED_FACE('',(#47035),#47046,.T.); +#47035 = FACE_BOUND('',#47036,.T.); +#47036 = EDGE_LOOP('',(#47037,#47038,#47039,#47045)); +#47037 = ORIENTED_EDGE('',*,*,#44830,.F.); +#47038 = ORIENTED_EDGE('',*,*,#44840,.T.); +#47039 = ORIENTED_EDGE('',*,*,#47040,.T.); +#47040 = EDGE_CURVE('',#44841,#44881,#47041,.T.); +#47041 = LINE('',#47042,#47043); +#47042 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#47043 = VECTOR('',#47044,1.); +#47044 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47045 = ORIENTED_EDGE('',*,*,#44888,.T.); +#47046 = PLANE('',#47047); +#47047 = AXIS2_PLACEMENT_3D('',#47048,#47049,#47050); +#47048 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#47049 = DIRECTION('',(0.,-0.,-1.)); +#47050 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47051 = ADVANCED_FACE('',(#47052),#47093,.F.); +#47052 = FACE_BOUND('',#47053,.F.); +#47053 = EDGE_LOOP('',(#47054,#47062,#47063,#47071,#47079,#47087)); +#47054 = ORIENTED_EDGE('',*,*,#47055,.T.); +#47055 = EDGE_CURVE('',#47056,#44881,#47058,.T.); +#47056 = VERTEX_POINT('',#47057); +#47057 = CARTESIAN_POINT('',(0.1,-0.3,-2.1)); +#47058 = LINE('',#47059,#47060); +#47059 = CARTESIAN_POINT('',(0.1,-0.3,-2.1)); +#47060 = VECTOR('',#47061,1.); +#47061 = DIRECTION('',(0.,0.,1.)); +#47062 = ORIENTED_EDGE('',*,*,#44880,.F.); +#47063 = ORIENTED_EDGE('',*,*,#47064,.T.); +#47064 = EDGE_CURVE('',#44873,#47065,#47067,.T.); +#47065 = VERTEX_POINT('',#47066); +#47066 = CARTESIAN_POINT('',(0.1,0.3,-2.1)); +#47067 = LINE('',#47068,#47069); +#47068 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#47069 = VECTOR('',#47070,1.); +#47070 = DIRECTION('',(0.,0.,-1.)); +#47071 = ORIENTED_EDGE('',*,*,#47072,.T.); +#47072 = EDGE_CURVE('',#47065,#47073,#47075,.T.); +#47073 = VERTEX_POINT('',#47074); +#47074 = CARTESIAN_POINT('',(0.1,0.15,-2.7)); +#47075 = LINE('',#47076,#47077); +#47076 = CARTESIAN_POINT('',(0.1,0.3,-2.1)); +#47077 = VECTOR('',#47078,1.); +#47078 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#47079 = ORIENTED_EDGE('',*,*,#47080,.T.); +#47080 = EDGE_CURVE('',#47073,#47081,#47083,.T.); +#47081 = VERTEX_POINT('',#47082); +#47082 = CARTESIAN_POINT('',(0.1,-0.15,-2.7)); +#47083 = LINE('',#47084,#47085); +#47084 = CARTESIAN_POINT('',(0.1,0.15,-2.7)); +#47085 = VECTOR('',#47086,1.); +#47086 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47087 = ORIENTED_EDGE('',*,*,#47088,.T.); +#47088 = EDGE_CURVE('',#47081,#47056,#47089,.T.); +#47089 = LINE('',#47090,#47091); +#47090 = CARTESIAN_POINT('',(0.1,-0.15,-2.7)); +#47091 = VECTOR('',#47092,1.); +#47092 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#47093 = PLANE('',#47094); +#47094 = AXIS2_PLACEMENT_3D('',#47095,#47096,#47097); +#47095 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,2.448597401424)); +#47096 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47097 = DIRECTION('',(0.,0.,1.)); +#47098 = ADVANCED_FACE('',(#47099),#47110,.T.); +#47099 = FACE_BOUND('',#47100,.T.); +#47100 = EDGE_LOOP('',(#47101,#47107,#47108,#47109)); +#47101 = ORIENTED_EDGE('',*,*,#47102,.F.); +#47102 = EDGE_CURVE('',#44849,#44873,#47103,.T.); +#47103 = LINE('',#47104,#47105); +#47104 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#47105 = VECTOR('',#47106,1.); +#47106 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47107 = ORIENTED_EDGE('',*,*,#44856,.T.); +#47108 = ORIENTED_EDGE('',*,*,#44864,.T.); +#47109 = ORIENTED_EDGE('',*,*,#44872,.T.); +#47110 = PLANE('',#47111); +#47111 = AXIS2_PLACEMENT_3D('',#47112,#47113,#47114); +#47112 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#47113 = DIRECTION('',(0.,-0.,-1.)); +#47114 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47115 = ADVANCED_FACE('',(#47116),#47157,.T.); +#47116 = FACE_BOUND('',#47117,.T.); +#47117 = EDGE_LOOP('',(#47118,#47126,#47127,#47135,#47143,#47151)); +#47118 = ORIENTED_EDGE('',*,*,#47119,.T.); +#47119 = EDGE_CURVE('',#47120,#44841,#47122,.T.); +#47120 = VERTEX_POINT('',#47121); +#47121 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#47122 = LINE('',#47123,#47124); +#47123 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#47124 = VECTOR('',#47125,1.); +#47125 = DIRECTION('',(0.,0.,1.)); +#47126 = ORIENTED_EDGE('',*,*,#44848,.F.); +#47127 = ORIENTED_EDGE('',*,*,#47128,.T.); +#47128 = EDGE_CURVE('',#44849,#47129,#47131,.T.); +#47129 = VERTEX_POINT('',#47130); +#47130 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#47131 = LINE('',#47132,#47133); +#47132 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#47133 = VECTOR('',#47134,1.); +#47134 = DIRECTION('',(0.,0.,-1.)); +#47135 = ORIENTED_EDGE('',*,*,#47136,.T.); +#47136 = EDGE_CURVE('',#47129,#47137,#47139,.T.); +#47137 = VERTEX_POINT('',#47138); +#47138 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#47139 = LINE('',#47140,#47141); +#47140 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#47141 = VECTOR('',#47142,1.); +#47142 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#47143 = ORIENTED_EDGE('',*,*,#47144,.F.); +#47144 = EDGE_CURVE('',#47145,#47137,#47147,.T.); +#47145 = VERTEX_POINT('',#47146); +#47146 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#47147 = LINE('',#47148,#47149); +#47148 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#47149 = VECTOR('',#47150,1.); +#47150 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47151 = ORIENTED_EDGE('',*,*,#47152,.T.); +#47152 = EDGE_CURVE('',#47145,#47120,#47153,.T.); +#47153 = LINE('',#47154,#47155); +#47154 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#47155 = VECTOR('',#47156,1.); +#47156 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#47157 = PLANE('',#47158); +#47158 = AXIS2_PLACEMENT_3D('',#47159,#47160,#47161); +#47159 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,2.448597401424)); +#47160 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47161 = DIRECTION('',(0.,0.,1.)); +#47162 = ADVANCED_FACE('',(#47163),#47188,.F.); +#47163 = FACE_BOUND('',#47164,.F.); +#47164 = EDGE_LOOP('',(#47165,#47173,#47181,#47187)); +#47165 = ORIENTED_EDGE('',*,*,#47166,.T.); +#47166 = EDGE_CURVE('',#44927,#47167,#47169,.T.); +#47167 = VERTEX_POINT('',#47168); +#47168 = CARTESIAN_POINT('',(0.3,-18.3,0.9)); +#47169 = LINE('',#47170,#47171); +#47170 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#47171 = VECTOR('',#47172,1.); +#47172 = DIRECTION('',(0.,-0.,-1.)); +#47173 = ORIENTED_EDGE('',*,*,#47174,.T.); +#47174 = EDGE_CURVE('',#47167,#47175,#47177,.T.); +#47175 = VERTEX_POINT('',#47176); +#47176 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#47177 = LINE('',#47178,#47179); +#47178 = CARTESIAN_POINT('',(0.3,-18.3,0.9)); +#47179 = VECTOR('',#47180,1.); +#47180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47181 = ORIENTED_EDGE('',*,*,#47182,.F.); +#47182 = EDGE_CURVE('',#44936,#47175,#47183,.T.); +#47183 = LINE('',#47184,#47185); +#47184 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#47185 = VECTOR('',#47186,1.); +#47186 = DIRECTION('',(0.,-0.,-1.)); +#47187 = ORIENTED_EDGE('',*,*,#44943,.F.); +#47188 = PLANE('',#47189); +#47189 = AXIS2_PLACEMENT_3D('',#47190,#47191,#47192); +#47190 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#47191 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47192 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47193 = ADVANCED_FACE('',(#47194),#47244,.F.); +#47194 = FACE_BOUND('',#47195,.F.); +#47195 = EDGE_LOOP('',(#47196,#47197,#47198,#47206,#47214,#47222,#47230, + #47238)); +#47196 = ORIENTED_EDGE('',*,*,#44967,.F.); +#47197 = ORIENTED_EDGE('',*,*,#47182,.T.); +#47198 = ORIENTED_EDGE('',*,*,#47199,.T.); +#47199 = EDGE_CURVE('',#47175,#47200,#47202,.T.); +#47200 = VERTEX_POINT('',#47201); +#47201 = CARTESIAN_POINT('',(0.1,-17.7,0.9)); +#47202 = LINE('',#47203,#47204); +#47203 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#47204 = VECTOR('',#47205,1.); +#47205 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47206 = ORIENTED_EDGE('',*,*,#47207,.T.); +#47207 = EDGE_CURVE('',#47200,#47208,#47210,.T.); +#47208 = VERTEX_POINT('',#47209); +#47209 = CARTESIAN_POINT('',(0.1,-17.7,4.5)); +#47210 = LINE('',#47211,#47212); +#47211 = CARTESIAN_POINT('',(0.1,-17.7,3.874298700712)); +#47212 = VECTOR('',#47213,1.); +#47213 = DIRECTION('',(0.,-0.,1.)); +#47214 = ORIENTED_EDGE('',*,*,#47215,.F.); +#47215 = EDGE_CURVE('',#47216,#47208,#47218,.T.); +#47216 = VERTEX_POINT('',#47217); +#47217 = CARTESIAN_POINT('',(-0.1,-17.7,4.5)); +#47218 = LINE('',#47219,#47220); +#47219 = CARTESIAN_POINT('',(-0.1,-17.7,4.5)); +#47220 = VECTOR('',#47221,1.); +#47221 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47222 = ORIENTED_EDGE('',*,*,#47223,.F.); +#47223 = EDGE_CURVE('',#47224,#47216,#47226,.T.); +#47224 = VERTEX_POINT('',#47225); +#47225 = CARTESIAN_POINT('',(-0.1,-17.7,0.9)); +#47226 = LINE('',#47227,#47228); +#47227 = CARTESIAN_POINT('',(-0.1,-17.7,3.874298700712)); +#47228 = VECTOR('',#47229,1.); +#47229 = DIRECTION('',(0.,-0.,1.)); +#47230 = ORIENTED_EDGE('',*,*,#47231,.T.); +#47231 = EDGE_CURVE('',#47224,#47232,#47234,.T.); +#47232 = VERTEX_POINT('',#47233); +#47233 = CARTESIAN_POINT('',(-0.3,-17.7,0.9)); +#47234 = LINE('',#47235,#47236); +#47235 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#47236 = VECTOR('',#47237,1.); +#47237 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47238 = ORIENTED_EDGE('',*,*,#47239,.F.); +#47239 = EDGE_CURVE('',#44960,#47232,#47240,.T.); +#47240 = LINE('',#47241,#47242); +#47241 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#47242 = VECTOR('',#47243,1.); +#47243 = DIRECTION('',(0.,-0.,-1.)); +#47244 = PLANE('',#47245); +#47245 = AXIS2_PLACEMENT_3D('',#47246,#47247,#47248); +#47246 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#47247 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47248 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47249 = ADVANCED_FACE('',(#47250),#47268,.F.); +#47250 = FACE_BOUND('',#47251,.F.); +#47251 = EDGE_LOOP('',(#47252,#47253,#47261,#47267)); +#47252 = ORIENTED_EDGE('',*,*,#47239,.T.); +#47253 = ORIENTED_EDGE('',*,*,#47254,.T.); +#47254 = EDGE_CURVE('',#47232,#47255,#47257,.T.); +#47255 = VERTEX_POINT('',#47256); +#47256 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#47257 = LINE('',#47258,#47259); +#47258 = CARTESIAN_POINT('',(-0.3,-17.7,0.9)); +#47259 = VECTOR('',#47260,1.); +#47260 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47261 = ORIENTED_EDGE('',*,*,#47262,.F.); +#47262 = EDGE_CURVE('',#44984,#47255,#47263,.T.); +#47263 = LINE('',#47264,#47265); +#47264 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#47265 = VECTOR('',#47266,1.); +#47266 = DIRECTION('',(0.,-0.,-1.)); +#47267 = ORIENTED_EDGE('',*,*,#44991,.F.); +#47268 = PLANE('',#47269); +#47269 = AXIS2_PLACEMENT_3D('',#47270,#47271,#47272); +#47270 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#47271 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47272 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47273 = ADVANCED_FACE('',(#47274),#47317,.F.); +#47274 = FACE_BOUND('',#47275,.F.); +#47275 = EDGE_LOOP('',(#47276,#47277,#47278,#47286,#47294,#47302,#47310, + #47316)); +#47276 = ORIENTED_EDGE('',*,*,#45008,.F.); +#47277 = ORIENTED_EDGE('',*,*,#47262,.T.); +#47278 = ORIENTED_EDGE('',*,*,#47279,.T.); +#47279 = EDGE_CURVE('',#47255,#47280,#47282,.T.); +#47280 = VERTEX_POINT('',#47281); +#47281 = CARTESIAN_POINT('',(-0.1,-18.3,0.9)); +#47282 = LINE('',#47283,#47284); +#47283 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#47284 = VECTOR('',#47285,1.); +#47285 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47286 = ORIENTED_EDGE('',*,*,#47287,.F.); +#47287 = EDGE_CURVE('',#47288,#47280,#47290,.T.); +#47288 = VERTEX_POINT('',#47289); +#47289 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#47290 = LINE('',#47291,#47292); +#47291 = CARTESIAN_POINT('',(-0.1,-18.3,3.874298700712)); +#47292 = VECTOR('',#47293,1.); +#47293 = DIRECTION('',(-0.,0.,-1.)); +#47294 = ORIENTED_EDGE('',*,*,#47295,.T.); +#47295 = EDGE_CURVE('',#47288,#47296,#47298,.T.); +#47296 = VERTEX_POINT('',#47297); +#47297 = CARTESIAN_POINT('',(0.1,-18.3,4.5)); +#47298 = LINE('',#47299,#47300); +#47299 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#47300 = VECTOR('',#47301,1.); +#47301 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47302 = ORIENTED_EDGE('',*,*,#47303,.T.); +#47303 = EDGE_CURVE('',#47296,#47304,#47306,.T.); +#47304 = VERTEX_POINT('',#47305); +#47305 = CARTESIAN_POINT('',(0.1,-18.3,0.9)); +#47306 = LINE('',#47307,#47308); +#47307 = CARTESIAN_POINT('',(0.1,-18.3,3.874298700712)); +#47308 = VECTOR('',#47309,1.); +#47309 = DIRECTION('',(-0.,0.,-1.)); +#47310 = ORIENTED_EDGE('',*,*,#47311,.T.); +#47311 = EDGE_CURVE('',#47304,#47167,#47312,.T.); +#47312 = LINE('',#47313,#47314); +#47313 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#47314 = VECTOR('',#47315,1.); +#47315 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47316 = ORIENTED_EDGE('',*,*,#47166,.F.); +#47317 = PLANE('',#47318); +#47318 = AXIS2_PLACEMENT_3D('',#47319,#47320,#47321); +#47319 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#47320 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47321 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47322 = ADVANCED_FACE('',(#47323),#47348,.F.); +#47323 = FACE_BOUND('',#47324,.F.); +#47324 = EDGE_LOOP('',(#47325,#47333,#47341,#47347)); +#47325 = ORIENTED_EDGE('',*,*,#47326,.T.); +#47326 = EDGE_CURVE('',#45023,#47327,#47329,.T.); +#47327 = VERTEX_POINT('',#47328); +#47328 = CARTESIAN_POINT('',(0.3,-16.3,0.9)); +#47329 = LINE('',#47330,#47331); +#47330 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#47331 = VECTOR('',#47332,1.); +#47332 = DIRECTION('',(0.,-0.,-1.)); +#47333 = ORIENTED_EDGE('',*,*,#47334,.T.); +#47334 = EDGE_CURVE('',#47327,#47335,#47337,.T.); +#47335 = VERTEX_POINT('',#47336); +#47336 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#47337 = LINE('',#47338,#47339); +#47338 = CARTESIAN_POINT('',(0.3,-16.3,0.9)); +#47339 = VECTOR('',#47340,1.); +#47340 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47341 = ORIENTED_EDGE('',*,*,#47342,.F.); +#47342 = EDGE_CURVE('',#45032,#47335,#47343,.T.); +#47343 = LINE('',#47344,#47345); +#47344 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#47345 = VECTOR('',#47346,1.); +#47346 = DIRECTION('',(0.,-0.,-1.)); +#47347 = ORIENTED_EDGE('',*,*,#45039,.F.); +#47348 = PLANE('',#47349); +#47349 = AXIS2_PLACEMENT_3D('',#47350,#47351,#47352); +#47350 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#47351 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47352 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47353 = ADVANCED_FACE('',(#47354),#47404,.F.); +#47354 = FACE_BOUND('',#47355,.F.); +#47355 = EDGE_LOOP('',(#47356,#47357,#47358,#47366,#47374,#47382,#47390, + #47398)); +#47356 = ORIENTED_EDGE('',*,*,#45063,.F.); +#47357 = ORIENTED_EDGE('',*,*,#47342,.T.); +#47358 = ORIENTED_EDGE('',*,*,#47359,.T.); +#47359 = EDGE_CURVE('',#47335,#47360,#47362,.T.); +#47360 = VERTEX_POINT('',#47361); +#47361 = CARTESIAN_POINT('',(0.1,-15.7,0.9)); +#47362 = LINE('',#47363,#47364); +#47363 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#47364 = VECTOR('',#47365,1.); +#47365 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47366 = ORIENTED_EDGE('',*,*,#47367,.T.); +#47367 = EDGE_CURVE('',#47360,#47368,#47370,.T.); +#47368 = VERTEX_POINT('',#47369); +#47369 = CARTESIAN_POINT('',(0.1,-15.7,4.5)); +#47370 = LINE('',#47371,#47372); +#47371 = CARTESIAN_POINT('',(0.1,-15.7,3.874298700712)); +#47372 = VECTOR('',#47373,1.); +#47373 = DIRECTION('',(0.,-0.,1.)); +#47374 = ORIENTED_EDGE('',*,*,#47375,.F.); +#47375 = EDGE_CURVE('',#47376,#47368,#47378,.T.); +#47376 = VERTEX_POINT('',#47377); +#47377 = CARTESIAN_POINT('',(-0.1,-15.7,4.5)); +#47378 = LINE('',#47379,#47380); +#47379 = CARTESIAN_POINT('',(-0.1,-15.7,4.5)); +#47380 = VECTOR('',#47381,1.); +#47381 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47382 = ORIENTED_EDGE('',*,*,#47383,.F.); +#47383 = EDGE_CURVE('',#47384,#47376,#47386,.T.); +#47384 = VERTEX_POINT('',#47385); +#47385 = CARTESIAN_POINT('',(-0.1,-15.7,0.9)); +#47386 = LINE('',#47387,#47388); +#47387 = CARTESIAN_POINT('',(-0.1,-15.7,3.874298700712)); +#47388 = VECTOR('',#47389,1.); +#47389 = DIRECTION('',(0.,-0.,1.)); +#47390 = ORIENTED_EDGE('',*,*,#47391,.T.); +#47391 = EDGE_CURVE('',#47384,#47392,#47394,.T.); +#47392 = VERTEX_POINT('',#47393); +#47393 = CARTESIAN_POINT('',(-0.3,-15.7,0.9)); +#47394 = LINE('',#47395,#47396); +#47395 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#47396 = VECTOR('',#47397,1.); +#47397 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47398 = ORIENTED_EDGE('',*,*,#47399,.F.); +#47399 = EDGE_CURVE('',#45056,#47392,#47400,.T.); +#47400 = LINE('',#47401,#47402); +#47401 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#47402 = VECTOR('',#47403,1.); +#47403 = DIRECTION('',(0.,-0.,-1.)); +#47404 = PLANE('',#47405); +#47405 = AXIS2_PLACEMENT_3D('',#47406,#47407,#47408); +#47406 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#47407 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47408 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47409 = ADVANCED_FACE('',(#47410),#47428,.F.); +#47410 = FACE_BOUND('',#47411,.F.); +#47411 = EDGE_LOOP('',(#47412,#47413,#47421,#47427)); +#47412 = ORIENTED_EDGE('',*,*,#47399,.T.); +#47413 = ORIENTED_EDGE('',*,*,#47414,.T.); +#47414 = EDGE_CURVE('',#47392,#47415,#47417,.T.); +#47415 = VERTEX_POINT('',#47416); +#47416 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#47417 = LINE('',#47418,#47419); +#47418 = CARTESIAN_POINT('',(-0.3,-15.7,0.9)); +#47419 = VECTOR('',#47420,1.); +#47420 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47421 = ORIENTED_EDGE('',*,*,#47422,.F.); +#47422 = EDGE_CURVE('',#45080,#47415,#47423,.T.); +#47423 = LINE('',#47424,#47425); +#47424 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#47425 = VECTOR('',#47426,1.); +#47426 = DIRECTION('',(0.,-0.,-1.)); +#47427 = ORIENTED_EDGE('',*,*,#45087,.F.); +#47428 = PLANE('',#47429); +#47429 = AXIS2_PLACEMENT_3D('',#47430,#47431,#47432); +#47430 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#47431 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47432 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47433 = ADVANCED_FACE('',(#47434),#47477,.F.); +#47434 = FACE_BOUND('',#47435,.F.); +#47435 = EDGE_LOOP('',(#47436,#47437,#47438,#47446,#47454,#47462,#47470, + #47476)); +#47436 = ORIENTED_EDGE('',*,*,#45104,.F.); +#47437 = ORIENTED_EDGE('',*,*,#47422,.T.); +#47438 = ORIENTED_EDGE('',*,*,#47439,.T.); +#47439 = EDGE_CURVE('',#47415,#47440,#47442,.T.); +#47440 = VERTEX_POINT('',#47441); +#47441 = CARTESIAN_POINT('',(-0.1,-16.3,0.9)); +#47442 = LINE('',#47443,#47444); +#47443 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#47444 = VECTOR('',#47445,1.); +#47445 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47446 = ORIENTED_EDGE('',*,*,#47447,.F.); +#47447 = EDGE_CURVE('',#47448,#47440,#47450,.T.); +#47448 = VERTEX_POINT('',#47449); +#47449 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#47450 = LINE('',#47451,#47452); +#47451 = CARTESIAN_POINT('',(-0.1,-16.3,3.874298700712)); +#47452 = VECTOR('',#47453,1.); +#47453 = DIRECTION('',(-0.,0.,-1.)); +#47454 = ORIENTED_EDGE('',*,*,#47455,.T.); +#47455 = EDGE_CURVE('',#47448,#47456,#47458,.T.); +#47456 = VERTEX_POINT('',#47457); +#47457 = CARTESIAN_POINT('',(0.1,-16.3,4.5)); +#47458 = LINE('',#47459,#47460); +#47459 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#47460 = VECTOR('',#47461,1.); +#47461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47462 = ORIENTED_EDGE('',*,*,#47463,.T.); +#47463 = EDGE_CURVE('',#47456,#47464,#47466,.T.); +#47464 = VERTEX_POINT('',#47465); +#47465 = CARTESIAN_POINT('',(0.1,-16.3,0.9)); +#47466 = LINE('',#47467,#47468); +#47467 = CARTESIAN_POINT('',(0.1,-16.3,3.874298700712)); +#47468 = VECTOR('',#47469,1.); +#47469 = DIRECTION('',(-0.,0.,-1.)); +#47470 = ORIENTED_EDGE('',*,*,#47471,.T.); +#47471 = EDGE_CURVE('',#47464,#47327,#47472,.T.); +#47472 = LINE('',#47473,#47474); +#47473 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#47474 = VECTOR('',#47475,1.); +#47475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47476 = ORIENTED_EDGE('',*,*,#47326,.F.); +#47477 = PLANE('',#47478); +#47478 = AXIS2_PLACEMENT_3D('',#47479,#47480,#47481); +#47479 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#47480 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47481 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47482 = ADVANCED_FACE('',(#47483),#47508,.F.); +#47483 = FACE_BOUND('',#47484,.F.); +#47484 = EDGE_LOOP('',(#47485,#47493,#47501,#47507)); +#47485 = ORIENTED_EDGE('',*,*,#47486,.T.); +#47486 = EDGE_CURVE('',#45119,#47487,#47489,.T.); +#47487 = VERTEX_POINT('',#47488); +#47488 = CARTESIAN_POINT('',(0.3,-14.3,0.9)); +#47489 = LINE('',#47490,#47491); +#47490 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#47491 = VECTOR('',#47492,1.); +#47492 = DIRECTION('',(0.,-0.,-1.)); +#47493 = ORIENTED_EDGE('',*,*,#47494,.T.); +#47494 = EDGE_CURVE('',#47487,#47495,#47497,.T.); +#47495 = VERTEX_POINT('',#47496); +#47496 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#47497 = LINE('',#47498,#47499); +#47498 = CARTESIAN_POINT('',(0.3,-14.3,0.9)); +#47499 = VECTOR('',#47500,1.); +#47500 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47501 = ORIENTED_EDGE('',*,*,#47502,.F.); +#47502 = EDGE_CURVE('',#45128,#47495,#47503,.T.); +#47503 = LINE('',#47504,#47505); +#47504 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#47505 = VECTOR('',#47506,1.); +#47506 = DIRECTION('',(0.,-0.,-1.)); +#47507 = ORIENTED_EDGE('',*,*,#45135,.F.); +#47508 = PLANE('',#47509); +#47509 = AXIS2_PLACEMENT_3D('',#47510,#47511,#47512); +#47510 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#47511 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47512 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47513 = ADVANCED_FACE('',(#47514),#47564,.F.); +#47514 = FACE_BOUND('',#47515,.F.); +#47515 = EDGE_LOOP('',(#47516,#47517,#47518,#47526,#47534,#47542,#47550, + #47558)); +#47516 = ORIENTED_EDGE('',*,*,#45159,.F.); +#47517 = ORIENTED_EDGE('',*,*,#47502,.T.); +#47518 = ORIENTED_EDGE('',*,*,#47519,.T.); +#47519 = EDGE_CURVE('',#47495,#47520,#47522,.T.); +#47520 = VERTEX_POINT('',#47521); +#47521 = CARTESIAN_POINT('',(0.1,-13.7,0.9)); +#47522 = LINE('',#47523,#47524); +#47523 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#47524 = VECTOR('',#47525,1.); +#47525 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47526 = ORIENTED_EDGE('',*,*,#47527,.T.); +#47527 = EDGE_CURVE('',#47520,#47528,#47530,.T.); +#47528 = VERTEX_POINT('',#47529); +#47529 = CARTESIAN_POINT('',(0.1,-13.7,4.5)); +#47530 = LINE('',#47531,#47532); +#47531 = CARTESIAN_POINT('',(0.1,-13.7,3.874298700712)); +#47532 = VECTOR('',#47533,1.); +#47533 = DIRECTION('',(0.,-0.,1.)); +#47534 = ORIENTED_EDGE('',*,*,#47535,.F.); +#47535 = EDGE_CURVE('',#47536,#47528,#47538,.T.); +#47536 = VERTEX_POINT('',#47537); +#47537 = CARTESIAN_POINT('',(-0.1,-13.7,4.5)); +#47538 = LINE('',#47539,#47540); +#47539 = CARTESIAN_POINT('',(-0.1,-13.7,4.5)); +#47540 = VECTOR('',#47541,1.); +#47541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47542 = ORIENTED_EDGE('',*,*,#47543,.F.); +#47543 = EDGE_CURVE('',#47544,#47536,#47546,.T.); +#47544 = VERTEX_POINT('',#47545); +#47545 = CARTESIAN_POINT('',(-0.1,-13.7,0.9)); +#47546 = LINE('',#47547,#47548); +#47547 = CARTESIAN_POINT('',(-0.1,-13.7,3.874298700712)); +#47548 = VECTOR('',#47549,1.); +#47549 = DIRECTION('',(0.,-0.,1.)); +#47550 = ORIENTED_EDGE('',*,*,#47551,.T.); +#47551 = EDGE_CURVE('',#47544,#47552,#47554,.T.); +#47552 = VERTEX_POINT('',#47553); +#47553 = CARTESIAN_POINT('',(-0.3,-13.7,0.9)); +#47554 = LINE('',#47555,#47556); +#47555 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#47556 = VECTOR('',#47557,1.); +#47557 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47558 = ORIENTED_EDGE('',*,*,#47559,.F.); +#47559 = EDGE_CURVE('',#45152,#47552,#47560,.T.); +#47560 = LINE('',#47561,#47562); +#47561 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#47562 = VECTOR('',#47563,1.); +#47563 = DIRECTION('',(0.,-0.,-1.)); +#47564 = PLANE('',#47565); +#47565 = AXIS2_PLACEMENT_3D('',#47566,#47567,#47568); +#47566 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#47567 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47568 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47569 = ADVANCED_FACE('',(#47570),#47588,.F.); +#47570 = FACE_BOUND('',#47571,.F.); +#47571 = EDGE_LOOP('',(#47572,#47573,#47581,#47587)); +#47572 = ORIENTED_EDGE('',*,*,#47559,.T.); +#47573 = ORIENTED_EDGE('',*,*,#47574,.T.); +#47574 = EDGE_CURVE('',#47552,#47575,#47577,.T.); +#47575 = VERTEX_POINT('',#47576); +#47576 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#47577 = LINE('',#47578,#47579); +#47578 = CARTESIAN_POINT('',(-0.3,-13.7,0.9)); +#47579 = VECTOR('',#47580,1.); +#47580 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47581 = ORIENTED_EDGE('',*,*,#47582,.F.); +#47582 = EDGE_CURVE('',#45176,#47575,#47583,.T.); +#47583 = LINE('',#47584,#47585); +#47584 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#47585 = VECTOR('',#47586,1.); +#47586 = DIRECTION('',(0.,-0.,-1.)); +#47587 = ORIENTED_EDGE('',*,*,#45183,.F.); +#47588 = PLANE('',#47589); +#47589 = AXIS2_PLACEMENT_3D('',#47590,#47591,#47592); +#47590 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#47591 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47592 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47593 = ADVANCED_FACE('',(#47594),#47637,.F.); +#47594 = FACE_BOUND('',#47595,.F.); +#47595 = EDGE_LOOP('',(#47596,#47597,#47598,#47606,#47614,#47622,#47630, + #47636)); +#47596 = ORIENTED_EDGE('',*,*,#45200,.F.); +#47597 = ORIENTED_EDGE('',*,*,#47582,.T.); +#47598 = ORIENTED_EDGE('',*,*,#47599,.T.); +#47599 = EDGE_CURVE('',#47575,#47600,#47602,.T.); +#47600 = VERTEX_POINT('',#47601); +#47601 = CARTESIAN_POINT('',(-0.1,-14.3,0.9)); +#47602 = LINE('',#47603,#47604); +#47603 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#47604 = VECTOR('',#47605,1.); +#47605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47606 = ORIENTED_EDGE('',*,*,#47607,.F.); +#47607 = EDGE_CURVE('',#47608,#47600,#47610,.T.); +#47608 = VERTEX_POINT('',#47609); +#47609 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#47610 = LINE('',#47611,#47612); +#47611 = CARTESIAN_POINT('',(-0.1,-14.3,3.874298700712)); +#47612 = VECTOR('',#47613,1.); +#47613 = DIRECTION('',(-0.,0.,-1.)); +#47614 = ORIENTED_EDGE('',*,*,#47615,.T.); +#47615 = EDGE_CURVE('',#47608,#47616,#47618,.T.); +#47616 = VERTEX_POINT('',#47617); +#47617 = CARTESIAN_POINT('',(0.1,-14.3,4.5)); +#47618 = LINE('',#47619,#47620); +#47619 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#47620 = VECTOR('',#47621,1.); +#47621 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47622 = ORIENTED_EDGE('',*,*,#47623,.T.); +#47623 = EDGE_CURVE('',#47616,#47624,#47626,.T.); +#47624 = VERTEX_POINT('',#47625); +#47625 = CARTESIAN_POINT('',(0.1,-14.3,0.9)); +#47626 = LINE('',#47627,#47628); +#47627 = CARTESIAN_POINT('',(0.1,-14.3,3.874298700712)); +#47628 = VECTOR('',#47629,1.); +#47629 = DIRECTION('',(-0.,0.,-1.)); +#47630 = ORIENTED_EDGE('',*,*,#47631,.T.); +#47631 = EDGE_CURVE('',#47624,#47487,#47632,.T.); +#47632 = LINE('',#47633,#47634); +#47633 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#47634 = VECTOR('',#47635,1.); +#47635 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47636 = ORIENTED_EDGE('',*,*,#47486,.F.); +#47637 = PLANE('',#47638); +#47638 = AXIS2_PLACEMENT_3D('',#47639,#47640,#47641); +#47639 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#47640 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47642 = ADVANCED_FACE('',(#47643),#47668,.F.); +#47643 = FACE_BOUND('',#47644,.F.); +#47644 = EDGE_LOOP('',(#47645,#47653,#47661,#47667)); +#47645 = ORIENTED_EDGE('',*,*,#47646,.T.); +#47646 = EDGE_CURVE('',#45215,#47647,#47649,.T.); +#47647 = VERTEX_POINT('',#47648); +#47648 = CARTESIAN_POINT('',(0.3,-12.3,0.9)); +#47649 = LINE('',#47650,#47651); +#47650 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#47651 = VECTOR('',#47652,1.); +#47652 = DIRECTION('',(0.,-0.,-1.)); +#47653 = ORIENTED_EDGE('',*,*,#47654,.T.); +#47654 = EDGE_CURVE('',#47647,#47655,#47657,.T.); +#47655 = VERTEX_POINT('',#47656); +#47656 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#47657 = LINE('',#47658,#47659); +#47658 = CARTESIAN_POINT('',(0.3,-12.3,0.9)); +#47659 = VECTOR('',#47660,1.); +#47660 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47661 = ORIENTED_EDGE('',*,*,#47662,.F.); +#47662 = EDGE_CURVE('',#45224,#47655,#47663,.T.); +#47663 = LINE('',#47664,#47665); +#47664 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#47665 = VECTOR('',#47666,1.); +#47666 = DIRECTION('',(0.,-0.,-1.)); +#47667 = ORIENTED_EDGE('',*,*,#45231,.F.); +#47668 = PLANE('',#47669); +#47669 = AXIS2_PLACEMENT_3D('',#47670,#47671,#47672); +#47670 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#47671 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47672 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47673 = ADVANCED_FACE('',(#47674),#47724,.F.); +#47674 = FACE_BOUND('',#47675,.F.); +#47675 = EDGE_LOOP('',(#47676,#47677,#47678,#47686,#47694,#47702,#47710, + #47718)); +#47676 = ORIENTED_EDGE('',*,*,#45255,.F.); +#47677 = ORIENTED_EDGE('',*,*,#47662,.T.); +#47678 = ORIENTED_EDGE('',*,*,#47679,.T.); +#47679 = EDGE_CURVE('',#47655,#47680,#47682,.T.); +#47680 = VERTEX_POINT('',#47681); +#47681 = CARTESIAN_POINT('',(0.1,-11.7,0.9)); +#47682 = LINE('',#47683,#47684); +#47683 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#47684 = VECTOR('',#47685,1.); +#47685 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47686 = ORIENTED_EDGE('',*,*,#47687,.T.); +#47687 = EDGE_CURVE('',#47680,#47688,#47690,.T.); +#47688 = VERTEX_POINT('',#47689); +#47689 = CARTESIAN_POINT('',(0.1,-11.7,4.5)); +#47690 = LINE('',#47691,#47692); +#47691 = CARTESIAN_POINT('',(0.1,-11.7,3.874298700712)); +#47692 = VECTOR('',#47693,1.); +#47693 = DIRECTION('',(0.,-0.,1.)); +#47694 = ORIENTED_EDGE('',*,*,#47695,.F.); +#47695 = EDGE_CURVE('',#47696,#47688,#47698,.T.); +#47696 = VERTEX_POINT('',#47697); +#47697 = CARTESIAN_POINT('',(-0.1,-11.7,4.5)); +#47698 = LINE('',#47699,#47700); +#47699 = CARTESIAN_POINT('',(-0.1,-11.7,4.5)); +#47700 = VECTOR('',#47701,1.); +#47701 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47702 = ORIENTED_EDGE('',*,*,#47703,.F.); +#47703 = EDGE_CURVE('',#47704,#47696,#47706,.T.); +#47704 = VERTEX_POINT('',#47705); +#47705 = CARTESIAN_POINT('',(-0.1,-11.7,0.9)); +#47706 = LINE('',#47707,#47708); +#47707 = CARTESIAN_POINT('',(-0.1,-11.7,3.874298700712)); +#47708 = VECTOR('',#47709,1.); +#47709 = DIRECTION('',(0.,-0.,1.)); +#47710 = ORIENTED_EDGE('',*,*,#47711,.T.); +#47711 = EDGE_CURVE('',#47704,#47712,#47714,.T.); +#47712 = VERTEX_POINT('',#47713); +#47713 = CARTESIAN_POINT('',(-0.3,-11.7,0.9)); +#47714 = LINE('',#47715,#47716); +#47715 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#47716 = VECTOR('',#47717,1.); +#47717 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47718 = ORIENTED_EDGE('',*,*,#47719,.F.); +#47719 = EDGE_CURVE('',#45248,#47712,#47720,.T.); +#47720 = LINE('',#47721,#47722); +#47721 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#47722 = VECTOR('',#47723,1.); +#47723 = DIRECTION('',(0.,-0.,-1.)); +#47724 = PLANE('',#47725); +#47725 = AXIS2_PLACEMENT_3D('',#47726,#47727,#47728); +#47726 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#47727 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47728 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47729 = ADVANCED_FACE('',(#47730),#47748,.F.); +#47730 = FACE_BOUND('',#47731,.F.); +#47731 = EDGE_LOOP('',(#47732,#47733,#47741,#47747)); +#47732 = ORIENTED_EDGE('',*,*,#47719,.T.); +#47733 = ORIENTED_EDGE('',*,*,#47734,.T.); +#47734 = EDGE_CURVE('',#47712,#47735,#47737,.T.); +#47735 = VERTEX_POINT('',#47736); +#47736 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#47737 = LINE('',#47738,#47739); +#47738 = CARTESIAN_POINT('',(-0.3,-11.7,0.9)); +#47739 = VECTOR('',#47740,1.); +#47740 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47741 = ORIENTED_EDGE('',*,*,#47742,.F.); +#47742 = EDGE_CURVE('',#45272,#47735,#47743,.T.); +#47743 = LINE('',#47744,#47745); +#47744 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#47745 = VECTOR('',#47746,1.); +#47746 = DIRECTION('',(0.,-0.,-1.)); +#47747 = ORIENTED_EDGE('',*,*,#45279,.F.); +#47748 = PLANE('',#47749); +#47749 = AXIS2_PLACEMENT_3D('',#47750,#47751,#47752); +#47750 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#47751 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47752 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47753 = ADVANCED_FACE('',(#47754),#47797,.F.); +#47754 = FACE_BOUND('',#47755,.F.); +#47755 = EDGE_LOOP('',(#47756,#47757,#47758,#47766,#47774,#47782,#47790, + #47796)); +#47756 = ORIENTED_EDGE('',*,*,#45296,.F.); +#47757 = ORIENTED_EDGE('',*,*,#47742,.T.); +#47758 = ORIENTED_EDGE('',*,*,#47759,.T.); +#47759 = EDGE_CURVE('',#47735,#47760,#47762,.T.); +#47760 = VERTEX_POINT('',#47761); +#47761 = CARTESIAN_POINT('',(-0.1,-12.3,0.9)); +#47762 = LINE('',#47763,#47764); +#47763 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#47764 = VECTOR('',#47765,1.); +#47765 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47766 = ORIENTED_EDGE('',*,*,#47767,.F.); +#47767 = EDGE_CURVE('',#47768,#47760,#47770,.T.); +#47768 = VERTEX_POINT('',#47769); +#47769 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#47770 = LINE('',#47771,#47772); +#47771 = CARTESIAN_POINT('',(-0.1,-12.3,3.874298700712)); +#47772 = VECTOR('',#47773,1.); +#47773 = DIRECTION('',(-0.,0.,-1.)); +#47774 = ORIENTED_EDGE('',*,*,#47775,.T.); +#47775 = EDGE_CURVE('',#47768,#47776,#47778,.T.); +#47776 = VERTEX_POINT('',#47777); +#47777 = CARTESIAN_POINT('',(0.1,-12.3,4.5)); +#47778 = LINE('',#47779,#47780); +#47779 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#47780 = VECTOR('',#47781,1.); +#47781 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47782 = ORIENTED_EDGE('',*,*,#47783,.T.); +#47783 = EDGE_CURVE('',#47776,#47784,#47786,.T.); +#47784 = VERTEX_POINT('',#47785); +#47785 = CARTESIAN_POINT('',(0.1,-12.3,0.9)); +#47786 = LINE('',#47787,#47788); +#47787 = CARTESIAN_POINT('',(0.1,-12.3,3.874298700712)); +#47788 = VECTOR('',#47789,1.); +#47789 = DIRECTION('',(-0.,0.,-1.)); +#47790 = ORIENTED_EDGE('',*,*,#47791,.T.); +#47791 = EDGE_CURVE('',#47784,#47647,#47792,.T.); +#47792 = LINE('',#47793,#47794); +#47793 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#47794 = VECTOR('',#47795,1.); +#47795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47796 = ORIENTED_EDGE('',*,*,#47646,.F.); +#47797 = PLANE('',#47798); +#47798 = AXIS2_PLACEMENT_3D('',#47799,#47800,#47801); +#47799 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#47800 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47801 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47802 = ADVANCED_FACE('',(#47803),#47828,.F.); +#47803 = FACE_BOUND('',#47804,.F.); +#47804 = EDGE_LOOP('',(#47805,#47813,#47821,#47827)); +#47805 = ORIENTED_EDGE('',*,*,#47806,.T.); +#47806 = EDGE_CURVE('',#45311,#47807,#47809,.T.); +#47807 = VERTEX_POINT('',#47808); +#47808 = CARTESIAN_POINT('',(0.3,-10.3,0.9)); +#47809 = LINE('',#47810,#47811); +#47810 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#47811 = VECTOR('',#47812,1.); +#47812 = DIRECTION('',(0.,-0.,-1.)); +#47813 = ORIENTED_EDGE('',*,*,#47814,.T.); +#47814 = EDGE_CURVE('',#47807,#47815,#47817,.T.); +#47815 = VERTEX_POINT('',#47816); +#47816 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#47817 = LINE('',#47818,#47819); +#47818 = CARTESIAN_POINT('',(0.3,-10.3,0.9)); +#47819 = VECTOR('',#47820,1.); +#47820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47821 = ORIENTED_EDGE('',*,*,#47822,.F.); +#47822 = EDGE_CURVE('',#45320,#47815,#47823,.T.); +#47823 = LINE('',#47824,#47825); +#47824 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#47825 = VECTOR('',#47826,1.); +#47826 = DIRECTION('',(0.,-0.,-1.)); +#47827 = ORIENTED_EDGE('',*,*,#45327,.F.); +#47828 = PLANE('',#47829); +#47829 = AXIS2_PLACEMENT_3D('',#47830,#47831,#47832); +#47830 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#47831 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47832 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47833 = ADVANCED_FACE('',(#47834),#47884,.F.); +#47834 = FACE_BOUND('',#47835,.F.); +#47835 = EDGE_LOOP('',(#47836,#47837,#47838,#47846,#47854,#47862,#47870, + #47878)); +#47836 = ORIENTED_EDGE('',*,*,#45351,.F.); +#47837 = ORIENTED_EDGE('',*,*,#47822,.T.); +#47838 = ORIENTED_EDGE('',*,*,#47839,.T.); +#47839 = EDGE_CURVE('',#47815,#47840,#47842,.T.); +#47840 = VERTEX_POINT('',#47841); +#47841 = CARTESIAN_POINT('',(0.1,-9.7,0.9)); +#47842 = LINE('',#47843,#47844); +#47843 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#47844 = VECTOR('',#47845,1.); +#47845 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47846 = ORIENTED_EDGE('',*,*,#47847,.T.); +#47847 = EDGE_CURVE('',#47840,#47848,#47850,.T.); +#47848 = VERTEX_POINT('',#47849); +#47849 = CARTESIAN_POINT('',(0.1,-9.7,4.5)); +#47850 = LINE('',#47851,#47852); +#47851 = CARTESIAN_POINT('',(0.1,-9.7,3.874298700712)); +#47852 = VECTOR('',#47853,1.); +#47853 = DIRECTION('',(0.,-0.,1.)); +#47854 = ORIENTED_EDGE('',*,*,#47855,.F.); +#47855 = EDGE_CURVE('',#47856,#47848,#47858,.T.); +#47856 = VERTEX_POINT('',#47857); +#47857 = CARTESIAN_POINT('',(-0.1,-9.7,4.5)); +#47858 = LINE('',#47859,#47860); +#47859 = CARTESIAN_POINT('',(-0.1,-9.7,4.5)); +#47860 = VECTOR('',#47861,1.); +#47861 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47862 = ORIENTED_EDGE('',*,*,#47863,.F.); +#47863 = EDGE_CURVE('',#47864,#47856,#47866,.T.); +#47864 = VERTEX_POINT('',#47865); +#47865 = CARTESIAN_POINT('',(-0.1,-9.7,0.9)); +#47866 = LINE('',#47867,#47868); +#47867 = CARTESIAN_POINT('',(-0.1,-9.7,3.874298700712)); +#47868 = VECTOR('',#47869,1.); +#47869 = DIRECTION('',(0.,-0.,1.)); +#47870 = ORIENTED_EDGE('',*,*,#47871,.T.); +#47871 = EDGE_CURVE('',#47864,#47872,#47874,.T.); +#47872 = VERTEX_POINT('',#47873); +#47873 = CARTESIAN_POINT('',(-0.3,-9.7,0.9)); +#47874 = LINE('',#47875,#47876); +#47875 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#47876 = VECTOR('',#47877,1.); +#47877 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47878 = ORIENTED_EDGE('',*,*,#47879,.F.); +#47879 = EDGE_CURVE('',#45344,#47872,#47880,.T.); +#47880 = LINE('',#47881,#47882); +#47881 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#47882 = VECTOR('',#47883,1.); +#47883 = DIRECTION('',(0.,-0.,-1.)); +#47884 = PLANE('',#47885); +#47885 = AXIS2_PLACEMENT_3D('',#47886,#47887,#47888); +#47886 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#47887 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47888 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47889 = ADVANCED_FACE('',(#47890),#47908,.F.); +#47890 = FACE_BOUND('',#47891,.F.); +#47891 = EDGE_LOOP('',(#47892,#47893,#47901,#47907)); +#47892 = ORIENTED_EDGE('',*,*,#47879,.T.); +#47893 = ORIENTED_EDGE('',*,*,#47894,.T.); +#47894 = EDGE_CURVE('',#47872,#47895,#47897,.T.); +#47895 = VERTEX_POINT('',#47896); +#47896 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#47897 = LINE('',#47898,#47899); +#47898 = CARTESIAN_POINT('',(-0.3,-9.7,0.9)); +#47899 = VECTOR('',#47900,1.); +#47900 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47901 = ORIENTED_EDGE('',*,*,#47902,.F.); +#47902 = EDGE_CURVE('',#45368,#47895,#47903,.T.); +#47903 = LINE('',#47904,#47905); +#47904 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#47905 = VECTOR('',#47906,1.); +#47906 = DIRECTION('',(0.,-0.,-1.)); +#47907 = ORIENTED_EDGE('',*,*,#45375,.F.); +#47908 = PLANE('',#47909); +#47909 = AXIS2_PLACEMENT_3D('',#47910,#47911,#47912); +#47910 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#47911 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#47912 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47913 = ADVANCED_FACE('',(#47914),#47957,.F.); +#47914 = FACE_BOUND('',#47915,.F.); +#47915 = EDGE_LOOP('',(#47916,#47917,#47918,#47926,#47934,#47942,#47950, + #47956)); +#47916 = ORIENTED_EDGE('',*,*,#45392,.F.); +#47917 = ORIENTED_EDGE('',*,*,#47902,.T.); +#47918 = ORIENTED_EDGE('',*,*,#47919,.T.); +#47919 = EDGE_CURVE('',#47895,#47920,#47922,.T.); +#47920 = VERTEX_POINT('',#47921); +#47921 = CARTESIAN_POINT('',(-0.1,-10.3,0.9)); +#47922 = LINE('',#47923,#47924); +#47923 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#47924 = VECTOR('',#47925,1.); +#47925 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47926 = ORIENTED_EDGE('',*,*,#47927,.F.); +#47927 = EDGE_CURVE('',#47928,#47920,#47930,.T.); +#47928 = VERTEX_POINT('',#47929); +#47929 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#47930 = LINE('',#47931,#47932); +#47931 = CARTESIAN_POINT('',(-0.1,-10.3,3.874298700712)); +#47932 = VECTOR('',#47933,1.); +#47933 = DIRECTION('',(-0.,0.,-1.)); +#47934 = ORIENTED_EDGE('',*,*,#47935,.T.); +#47935 = EDGE_CURVE('',#47928,#47936,#47938,.T.); +#47936 = VERTEX_POINT('',#47937); +#47937 = CARTESIAN_POINT('',(0.1,-10.3,4.5)); +#47938 = LINE('',#47939,#47940); +#47939 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#47940 = VECTOR('',#47941,1.); +#47941 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47942 = ORIENTED_EDGE('',*,*,#47943,.T.); +#47943 = EDGE_CURVE('',#47936,#47944,#47946,.T.); +#47944 = VERTEX_POINT('',#47945); +#47945 = CARTESIAN_POINT('',(0.1,-10.3,0.9)); +#47946 = LINE('',#47947,#47948); +#47947 = CARTESIAN_POINT('',(0.1,-10.3,3.874298700712)); +#47948 = VECTOR('',#47949,1.); +#47949 = DIRECTION('',(-0.,0.,-1.)); +#47950 = ORIENTED_EDGE('',*,*,#47951,.T.); +#47951 = EDGE_CURVE('',#47944,#47807,#47952,.T.); +#47952 = LINE('',#47953,#47954); +#47953 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#47954 = VECTOR('',#47955,1.); +#47955 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47956 = ORIENTED_EDGE('',*,*,#47806,.F.); +#47957 = PLANE('',#47958); +#47958 = AXIS2_PLACEMENT_3D('',#47959,#47960,#47961); +#47959 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#47960 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#47961 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47962 = ADVANCED_FACE('',(#47963),#47988,.F.); +#47963 = FACE_BOUND('',#47964,.F.); +#47964 = EDGE_LOOP('',(#47965,#47973,#47981,#47987)); +#47965 = ORIENTED_EDGE('',*,*,#47966,.T.); +#47966 = EDGE_CURVE('',#45407,#47967,#47969,.T.); +#47967 = VERTEX_POINT('',#47968); +#47968 = CARTESIAN_POINT('',(0.3,-8.3,0.9)); +#47969 = LINE('',#47970,#47971); +#47970 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#47971 = VECTOR('',#47972,1.); +#47972 = DIRECTION('',(0.,-0.,-1.)); +#47973 = ORIENTED_EDGE('',*,*,#47974,.T.); +#47974 = EDGE_CURVE('',#47967,#47975,#47977,.T.); +#47975 = VERTEX_POINT('',#47976); +#47976 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#47977 = LINE('',#47978,#47979); +#47978 = CARTESIAN_POINT('',(0.3,-8.3,0.9)); +#47979 = VECTOR('',#47980,1.); +#47980 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47981 = ORIENTED_EDGE('',*,*,#47982,.F.); +#47982 = EDGE_CURVE('',#45416,#47975,#47983,.T.); +#47983 = LINE('',#47984,#47985); +#47984 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#47985 = VECTOR('',#47986,1.); +#47986 = DIRECTION('',(0.,-0.,-1.)); +#47987 = ORIENTED_EDGE('',*,*,#45423,.F.); +#47988 = PLANE('',#47989); +#47989 = AXIS2_PLACEMENT_3D('',#47990,#47991,#47992); +#47990 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#47991 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#47992 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#47993 = ADVANCED_FACE('',(#47994),#48044,.F.); +#47994 = FACE_BOUND('',#47995,.F.); +#47995 = EDGE_LOOP('',(#47996,#47997,#47998,#48006,#48014,#48022,#48030, + #48038)); +#47996 = ORIENTED_EDGE('',*,*,#45447,.F.); +#47997 = ORIENTED_EDGE('',*,*,#47982,.T.); +#47998 = ORIENTED_EDGE('',*,*,#47999,.T.); +#47999 = EDGE_CURVE('',#47975,#48000,#48002,.T.); +#48000 = VERTEX_POINT('',#48001); +#48001 = CARTESIAN_POINT('',(0.1,-7.7,0.9)); +#48002 = LINE('',#48003,#48004); +#48003 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#48004 = VECTOR('',#48005,1.); +#48005 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48006 = ORIENTED_EDGE('',*,*,#48007,.T.); +#48007 = EDGE_CURVE('',#48000,#48008,#48010,.T.); +#48008 = VERTEX_POINT('',#48009); +#48009 = CARTESIAN_POINT('',(0.1,-7.7,4.5)); +#48010 = LINE('',#48011,#48012); +#48011 = CARTESIAN_POINT('',(0.1,-7.7,3.874298700712)); +#48012 = VECTOR('',#48013,1.); +#48013 = DIRECTION('',(0.,-0.,1.)); +#48014 = ORIENTED_EDGE('',*,*,#48015,.F.); +#48015 = EDGE_CURVE('',#48016,#48008,#48018,.T.); +#48016 = VERTEX_POINT('',#48017); +#48017 = CARTESIAN_POINT('',(-0.1,-7.7,4.5)); +#48018 = LINE('',#48019,#48020); +#48019 = CARTESIAN_POINT('',(-0.1,-7.7,4.5)); +#48020 = VECTOR('',#48021,1.); +#48021 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48022 = ORIENTED_EDGE('',*,*,#48023,.F.); +#48023 = EDGE_CURVE('',#48024,#48016,#48026,.T.); +#48024 = VERTEX_POINT('',#48025); +#48025 = CARTESIAN_POINT('',(-0.1,-7.7,0.9)); +#48026 = LINE('',#48027,#48028); +#48027 = CARTESIAN_POINT('',(-0.1,-7.7,3.874298700712)); +#48028 = VECTOR('',#48029,1.); +#48029 = DIRECTION('',(0.,-0.,1.)); +#48030 = ORIENTED_EDGE('',*,*,#48031,.T.); +#48031 = EDGE_CURVE('',#48024,#48032,#48034,.T.); +#48032 = VERTEX_POINT('',#48033); +#48033 = CARTESIAN_POINT('',(-0.3,-7.7,0.9)); +#48034 = LINE('',#48035,#48036); +#48035 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#48036 = VECTOR('',#48037,1.); +#48037 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48038 = ORIENTED_EDGE('',*,*,#48039,.F.); +#48039 = EDGE_CURVE('',#45440,#48032,#48040,.T.); +#48040 = LINE('',#48041,#48042); +#48041 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#48042 = VECTOR('',#48043,1.); +#48043 = DIRECTION('',(0.,-0.,-1.)); +#48044 = PLANE('',#48045); +#48045 = AXIS2_PLACEMENT_3D('',#48046,#48047,#48048); +#48046 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#48047 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48048 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48049 = ADVANCED_FACE('',(#48050),#48068,.F.); +#48050 = FACE_BOUND('',#48051,.F.); +#48051 = EDGE_LOOP('',(#48052,#48053,#48061,#48067)); +#48052 = ORIENTED_EDGE('',*,*,#48039,.T.); +#48053 = ORIENTED_EDGE('',*,*,#48054,.T.); +#48054 = EDGE_CURVE('',#48032,#48055,#48057,.T.); +#48055 = VERTEX_POINT('',#48056); +#48056 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#48057 = LINE('',#48058,#48059); +#48058 = CARTESIAN_POINT('',(-0.3,-7.7,0.9)); +#48059 = VECTOR('',#48060,1.); +#48060 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48061 = ORIENTED_EDGE('',*,*,#48062,.F.); +#48062 = EDGE_CURVE('',#45464,#48055,#48063,.T.); +#48063 = LINE('',#48064,#48065); +#48064 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#48065 = VECTOR('',#48066,1.); +#48066 = DIRECTION('',(0.,-0.,-1.)); +#48067 = ORIENTED_EDGE('',*,*,#45471,.F.); +#48068 = PLANE('',#48069); +#48069 = AXIS2_PLACEMENT_3D('',#48070,#48071,#48072); +#48070 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#48071 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48072 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48073 = ADVANCED_FACE('',(#48074),#48117,.F.); +#48074 = FACE_BOUND('',#48075,.F.); +#48075 = EDGE_LOOP('',(#48076,#48077,#48078,#48086,#48094,#48102,#48110, + #48116)); +#48076 = ORIENTED_EDGE('',*,*,#45488,.F.); +#48077 = ORIENTED_EDGE('',*,*,#48062,.T.); +#48078 = ORIENTED_EDGE('',*,*,#48079,.T.); +#48079 = EDGE_CURVE('',#48055,#48080,#48082,.T.); +#48080 = VERTEX_POINT('',#48081); +#48081 = CARTESIAN_POINT('',(-0.1,-8.3,0.9)); +#48082 = LINE('',#48083,#48084); +#48083 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#48084 = VECTOR('',#48085,1.); +#48085 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48086 = ORIENTED_EDGE('',*,*,#48087,.F.); +#48087 = EDGE_CURVE('',#48088,#48080,#48090,.T.); +#48088 = VERTEX_POINT('',#48089); +#48089 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#48090 = LINE('',#48091,#48092); +#48091 = CARTESIAN_POINT('',(-0.1,-8.3,3.874298700712)); +#48092 = VECTOR('',#48093,1.); +#48093 = DIRECTION('',(-0.,0.,-1.)); +#48094 = ORIENTED_EDGE('',*,*,#48095,.T.); +#48095 = EDGE_CURVE('',#48088,#48096,#48098,.T.); +#48096 = VERTEX_POINT('',#48097); +#48097 = CARTESIAN_POINT('',(0.1,-8.3,4.5)); +#48098 = LINE('',#48099,#48100); +#48099 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#48100 = VECTOR('',#48101,1.); +#48101 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48102 = ORIENTED_EDGE('',*,*,#48103,.T.); +#48103 = EDGE_CURVE('',#48096,#48104,#48106,.T.); +#48104 = VERTEX_POINT('',#48105); +#48105 = CARTESIAN_POINT('',(0.1,-8.3,0.9)); +#48106 = LINE('',#48107,#48108); +#48107 = CARTESIAN_POINT('',(0.1,-8.3,3.874298700712)); +#48108 = VECTOR('',#48109,1.); +#48109 = DIRECTION('',(-0.,0.,-1.)); +#48110 = ORIENTED_EDGE('',*,*,#48111,.T.); +#48111 = EDGE_CURVE('',#48104,#47967,#48112,.T.); +#48112 = LINE('',#48113,#48114); +#48113 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#48114 = VECTOR('',#48115,1.); +#48115 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48116 = ORIENTED_EDGE('',*,*,#47966,.F.); +#48117 = PLANE('',#48118); +#48118 = AXIS2_PLACEMENT_3D('',#48119,#48120,#48121); +#48119 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#48120 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48121 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48122 = ADVANCED_FACE('',(#48123),#48148,.F.); +#48123 = FACE_BOUND('',#48124,.F.); +#48124 = EDGE_LOOP('',(#48125,#48133,#48141,#48147)); +#48125 = ORIENTED_EDGE('',*,*,#48126,.T.); +#48126 = EDGE_CURVE('',#45503,#48127,#48129,.T.); +#48127 = VERTEX_POINT('',#48128); +#48128 = CARTESIAN_POINT('',(0.3,-6.3,0.9)); +#48129 = LINE('',#48130,#48131); +#48130 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#48131 = VECTOR('',#48132,1.); +#48132 = DIRECTION('',(0.,-0.,-1.)); +#48133 = ORIENTED_EDGE('',*,*,#48134,.T.); +#48134 = EDGE_CURVE('',#48127,#48135,#48137,.T.); +#48135 = VERTEX_POINT('',#48136); +#48136 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#48137 = LINE('',#48138,#48139); +#48138 = CARTESIAN_POINT('',(0.3,-6.3,0.9)); +#48139 = VECTOR('',#48140,1.); +#48140 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48141 = ORIENTED_EDGE('',*,*,#48142,.F.); +#48142 = EDGE_CURVE('',#45512,#48135,#48143,.T.); +#48143 = LINE('',#48144,#48145); +#48144 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#48145 = VECTOR('',#48146,1.); +#48146 = DIRECTION('',(0.,-0.,-1.)); +#48147 = ORIENTED_EDGE('',*,*,#45519,.F.); +#48148 = PLANE('',#48149); +#48149 = AXIS2_PLACEMENT_3D('',#48150,#48151,#48152); +#48150 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#48151 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48152 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48153 = ADVANCED_FACE('',(#48154),#48204,.F.); +#48154 = FACE_BOUND('',#48155,.F.); +#48155 = EDGE_LOOP('',(#48156,#48157,#48158,#48166,#48174,#48182,#48190, + #48198)); +#48156 = ORIENTED_EDGE('',*,*,#45543,.F.); +#48157 = ORIENTED_EDGE('',*,*,#48142,.T.); +#48158 = ORIENTED_EDGE('',*,*,#48159,.T.); +#48159 = EDGE_CURVE('',#48135,#48160,#48162,.T.); +#48160 = VERTEX_POINT('',#48161); +#48161 = CARTESIAN_POINT('',(0.1,-5.7,0.9)); +#48162 = LINE('',#48163,#48164); +#48163 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#48164 = VECTOR('',#48165,1.); +#48165 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48166 = ORIENTED_EDGE('',*,*,#48167,.T.); +#48167 = EDGE_CURVE('',#48160,#48168,#48170,.T.); +#48168 = VERTEX_POINT('',#48169); +#48169 = CARTESIAN_POINT('',(0.1,-5.7,4.5)); +#48170 = LINE('',#48171,#48172); +#48171 = CARTESIAN_POINT('',(0.1,-5.7,3.874298700712)); +#48172 = VECTOR('',#48173,1.); +#48173 = DIRECTION('',(0.,-0.,1.)); +#48174 = ORIENTED_EDGE('',*,*,#48175,.F.); +#48175 = EDGE_CURVE('',#48176,#48168,#48178,.T.); +#48176 = VERTEX_POINT('',#48177); +#48177 = CARTESIAN_POINT('',(-0.1,-5.7,4.5)); +#48178 = LINE('',#48179,#48180); +#48179 = CARTESIAN_POINT('',(-0.1,-5.7,4.5)); +#48180 = VECTOR('',#48181,1.); +#48181 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48182 = ORIENTED_EDGE('',*,*,#48183,.F.); +#48183 = EDGE_CURVE('',#48184,#48176,#48186,.T.); +#48184 = VERTEX_POINT('',#48185); +#48185 = CARTESIAN_POINT('',(-0.1,-5.7,0.9)); +#48186 = LINE('',#48187,#48188); +#48187 = CARTESIAN_POINT('',(-0.1,-5.7,3.874298700712)); +#48188 = VECTOR('',#48189,1.); +#48189 = DIRECTION('',(0.,-0.,1.)); +#48190 = ORIENTED_EDGE('',*,*,#48191,.T.); +#48191 = EDGE_CURVE('',#48184,#48192,#48194,.T.); +#48192 = VERTEX_POINT('',#48193); +#48193 = CARTESIAN_POINT('',(-0.3,-5.7,0.9)); +#48194 = LINE('',#48195,#48196); +#48195 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#48196 = VECTOR('',#48197,1.); +#48197 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48198 = ORIENTED_EDGE('',*,*,#48199,.F.); +#48199 = EDGE_CURVE('',#45536,#48192,#48200,.T.); +#48200 = LINE('',#48201,#48202); +#48201 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#48202 = VECTOR('',#48203,1.); +#48203 = DIRECTION('',(0.,-0.,-1.)); +#48204 = PLANE('',#48205); +#48205 = AXIS2_PLACEMENT_3D('',#48206,#48207,#48208); +#48206 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#48207 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48208 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48209 = ADVANCED_FACE('',(#48210),#48228,.F.); +#48210 = FACE_BOUND('',#48211,.F.); +#48211 = EDGE_LOOP('',(#48212,#48213,#48221,#48227)); +#48212 = ORIENTED_EDGE('',*,*,#48199,.T.); +#48213 = ORIENTED_EDGE('',*,*,#48214,.T.); +#48214 = EDGE_CURVE('',#48192,#48215,#48217,.T.); +#48215 = VERTEX_POINT('',#48216); +#48216 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#48217 = LINE('',#48218,#48219); +#48218 = CARTESIAN_POINT('',(-0.3,-5.7,0.9)); +#48219 = VECTOR('',#48220,1.); +#48220 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48221 = ORIENTED_EDGE('',*,*,#48222,.F.); +#48222 = EDGE_CURVE('',#45560,#48215,#48223,.T.); +#48223 = LINE('',#48224,#48225); +#48224 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#48225 = VECTOR('',#48226,1.); +#48226 = DIRECTION('',(0.,-0.,-1.)); +#48227 = ORIENTED_EDGE('',*,*,#45567,.F.); +#48228 = PLANE('',#48229); +#48229 = AXIS2_PLACEMENT_3D('',#48230,#48231,#48232); +#48230 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#48231 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48232 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48233 = ADVANCED_FACE('',(#48234),#48277,.F.); +#48234 = FACE_BOUND('',#48235,.F.); +#48235 = EDGE_LOOP('',(#48236,#48237,#48238,#48246,#48254,#48262,#48270, + #48276)); +#48236 = ORIENTED_EDGE('',*,*,#45584,.F.); +#48237 = ORIENTED_EDGE('',*,*,#48222,.T.); +#48238 = ORIENTED_EDGE('',*,*,#48239,.T.); +#48239 = EDGE_CURVE('',#48215,#48240,#48242,.T.); +#48240 = VERTEX_POINT('',#48241); +#48241 = CARTESIAN_POINT('',(-0.1,-6.3,0.9)); +#48242 = LINE('',#48243,#48244); +#48243 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#48244 = VECTOR('',#48245,1.); +#48245 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48246 = ORIENTED_EDGE('',*,*,#48247,.F.); +#48247 = EDGE_CURVE('',#48248,#48240,#48250,.T.); +#48248 = VERTEX_POINT('',#48249); +#48249 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#48250 = LINE('',#48251,#48252); +#48251 = CARTESIAN_POINT('',(-0.1,-6.3,3.874298700712)); +#48252 = VECTOR('',#48253,1.); +#48253 = DIRECTION('',(-0.,0.,-1.)); +#48254 = ORIENTED_EDGE('',*,*,#48255,.T.); +#48255 = EDGE_CURVE('',#48248,#48256,#48258,.T.); +#48256 = VERTEX_POINT('',#48257); +#48257 = CARTESIAN_POINT('',(0.1,-6.3,4.5)); +#48258 = LINE('',#48259,#48260); +#48259 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#48260 = VECTOR('',#48261,1.); +#48261 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48262 = ORIENTED_EDGE('',*,*,#48263,.T.); +#48263 = EDGE_CURVE('',#48256,#48264,#48266,.T.); +#48264 = VERTEX_POINT('',#48265); +#48265 = CARTESIAN_POINT('',(0.1,-6.3,0.9)); +#48266 = LINE('',#48267,#48268); +#48267 = CARTESIAN_POINT('',(0.1,-6.3,3.874298700712)); +#48268 = VECTOR('',#48269,1.); +#48269 = DIRECTION('',(-0.,0.,-1.)); +#48270 = ORIENTED_EDGE('',*,*,#48271,.T.); +#48271 = EDGE_CURVE('',#48264,#48127,#48272,.T.); +#48272 = LINE('',#48273,#48274); +#48273 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#48274 = VECTOR('',#48275,1.); +#48275 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48276 = ORIENTED_EDGE('',*,*,#48126,.F.); +#48277 = PLANE('',#48278); +#48278 = AXIS2_PLACEMENT_3D('',#48279,#48280,#48281); +#48279 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#48280 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48281 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48282 = ADVANCED_FACE('',(#48283),#48308,.F.); +#48283 = FACE_BOUND('',#48284,.F.); +#48284 = EDGE_LOOP('',(#48285,#48293,#48301,#48307)); +#48285 = ORIENTED_EDGE('',*,*,#48286,.T.); +#48286 = EDGE_CURVE('',#45599,#48287,#48289,.T.); +#48287 = VERTEX_POINT('',#48288); +#48288 = CARTESIAN_POINT('',(0.3,-4.3,0.9)); +#48289 = LINE('',#48290,#48291); +#48290 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#48291 = VECTOR('',#48292,1.); +#48292 = DIRECTION('',(0.,-0.,-1.)); +#48293 = ORIENTED_EDGE('',*,*,#48294,.T.); +#48294 = EDGE_CURVE('',#48287,#48295,#48297,.T.); +#48295 = VERTEX_POINT('',#48296); +#48296 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#48297 = LINE('',#48298,#48299); +#48298 = CARTESIAN_POINT('',(0.3,-4.3,0.9)); +#48299 = VECTOR('',#48300,1.); +#48300 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48301 = ORIENTED_EDGE('',*,*,#48302,.F.); +#48302 = EDGE_CURVE('',#45608,#48295,#48303,.T.); +#48303 = LINE('',#48304,#48305); +#48304 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#48305 = VECTOR('',#48306,1.); +#48306 = DIRECTION('',(0.,-0.,-1.)); +#48307 = ORIENTED_EDGE('',*,*,#45615,.F.); +#48308 = PLANE('',#48309); +#48309 = AXIS2_PLACEMENT_3D('',#48310,#48311,#48312); +#48310 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#48311 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48312 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48313 = ADVANCED_FACE('',(#48314),#48364,.F.); +#48314 = FACE_BOUND('',#48315,.F.); +#48315 = EDGE_LOOP('',(#48316,#48317,#48318,#48326,#48334,#48342,#48350, + #48358)); +#48316 = ORIENTED_EDGE('',*,*,#45639,.F.); +#48317 = ORIENTED_EDGE('',*,*,#48302,.T.); +#48318 = ORIENTED_EDGE('',*,*,#48319,.T.); +#48319 = EDGE_CURVE('',#48295,#48320,#48322,.T.); +#48320 = VERTEX_POINT('',#48321); +#48321 = CARTESIAN_POINT('',(0.1,-3.7,0.9)); +#48322 = LINE('',#48323,#48324); +#48323 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#48324 = VECTOR('',#48325,1.); +#48325 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48326 = ORIENTED_EDGE('',*,*,#48327,.T.); +#48327 = EDGE_CURVE('',#48320,#48328,#48330,.T.); +#48328 = VERTEX_POINT('',#48329); +#48329 = CARTESIAN_POINT('',(0.1,-3.7,4.5)); +#48330 = LINE('',#48331,#48332); +#48331 = CARTESIAN_POINT('',(0.1,-3.7,3.874298700712)); +#48332 = VECTOR('',#48333,1.); +#48333 = DIRECTION('',(0.,-0.,1.)); +#48334 = ORIENTED_EDGE('',*,*,#48335,.F.); +#48335 = EDGE_CURVE('',#48336,#48328,#48338,.T.); +#48336 = VERTEX_POINT('',#48337); +#48337 = CARTESIAN_POINT('',(-0.1,-3.7,4.5)); +#48338 = LINE('',#48339,#48340); +#48339 = CARTESIAN_POINT('',(-0.1,-3.7,4.5)); +#48340 = VECTOR('',#48341,1.); +#48341 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48342 = ORIENTED_EDGE('',*,*,#48343,.F.); +#48343 = EDGE_CURVE('',#48344,#48336,#48346,.T.); +#48344 = VERTEX_POINT('',#48345); +#48345 = CARTESIAN_POINT('',(-0.1,-3.7,0.9)); +#48346 = LINE('',#48347,#48348); +#48347 = CARTESIAN_POINT('',(-0.1,-3.7,3.874298700712)); +#48348 = VECTOR('',#48349,1.); +#48349 = DIRECTION('',(0.,-0.,1.)); +#48350 = ORIENTED_EDGE('',*,*,#48351,.T.); +#48351 = EDGE_CURVE('',#48344,#48352,#48354,.T.); +#48352 = VERTEX_POINT('',#48353); +#48353 = CARTESIAN_POINT('',(-0.3,-3.7,0.9)); +#48354 = LINE('',#48355,#48356); +#48355 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#48356 = VECTOR('',#48357,1.); +#48357 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48358 = ORIENTED_EDGE('',*,*,#48359,.F.); +#48359 = EDGE_CURVE('',#45632,#48352,#48360,.T.); +#48360 = LINE('',#48361,#48362); +#48361 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#48362 = VECTOR('',#48363,1.); +#48363 = DIRECTION('',(0.,-0.,-1.)); +#48364 = PLANE('',#48365); +#48365 = AXIS2_PLACEMENT_3D('',#48366,#48367,#48368); +#48366 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#48367 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48368 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48369 = ADVANCED_FACE('',(#48370),#48388,.F.); +#48370 = FACE_BOUND('',#48371,.F.); +#48371 = EDGE_LOOP('',(#48372,#48373,#48381,#48387)); +#48372 = ORIENTED_EDGE('',*,*,#48359,.T.); +#48373 = ORIENTED_EDGE('',*,*,#48374,.T.); +#48374 = EDGE_CURVE('',#48352,#48375,#48377,.T.); +#48375 = VERTEX_POINT('',#48376); +#48376 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#48377 = LINE('',#48378,#48379); +#48378 = CARTESIAN_POINT('',(-0.3,-3.7,0.9)); +#48379 = VECTOR('',#48380,1.); +#48380 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48381 = ORIENTED_EDGE('',*,*,#48382,.F.); +#48382 = EDGE_CURVE('',#45656,#48375,#48383,.T.); +#48383 = LINE('',#48384,#48385); +#48384 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#48385 = VECTOR('',#48386,1.); +#48386 = DIRECTION('',(0.,-0.,-1.)); +#48387 = ORIENTED_EDGE('',*,*,#45663,.F.); +#48388 = PLANE('',#48389); +#48389 = AXIS2_PLACEMENT_3D('',#48390,#48391,#48392); +#48390 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#48391 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48392 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48393 = ADVANCED_FACE('',(#48394),#48437,.F.); +#48394 = FACE_BOUND('',#48395,.F.); +#48395 = EDGE_LOOP('',(#48396,#48397,#48398,#48406,#48414,#48422,#48430, + #48436)); +#48396 = ORIENTED_EDGE('',*,*,#45680,.F.); +#48397 = ORIENTED_EDGE('',*,*,#48382,.T.); +#48398 = ORIENTED_EDGE('',*,*,#48399,.T.); +#48399 = EDGE_CURVE('',#48375,#48400,#48402,.T.); +#48400 = VERTEX_POINT('',#48401); +#48401 = CARTESIAN_POINT('',(-0.1,-4.3,0.9)); +#48402 = LINE('',#48403,#48404); +#48403 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#48404 = VECTOR('',#48405,1.); +#48405 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48406 = ORIENTED_EDGE('',*,*,#48407,.F.); +#48407 = EDGE_CURVE('',#48408,#48400,#48410,.T.); +#48408 = VERTEX_POINT('',#48409); +#48409 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#48410 = LINE('',#48411,#48412); +#48411 = CARTESIAN_POINT('',(-0.1,-4.3,3.874298700712)); +#48412 = VECTOR('',#48413,1.); +#48413 = DIRECTION('',(-0.,0.,-1.)); +#48414 = ORIENTED_EDGE('',*,*,#48415,.T.); +#48415 = EDGE_CURVE('',#48408,#48416,#48418,.T.); +#48416 = VERTEX_POINT('',#48417); +#48417 = CARTESIAN_POINT('',(0.1,-4.3,4.5)); +#48418 = LINE('',#48419,#48420); +#48419 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#48420 = VECTOR('',#48421,1.); +#48421 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48422 = ORIENTED_EDGE('',*,*,#48423,.T.); +#48423 = EDGE_CURVE('',#48416,#48424,#48426,.T.); +#48424 = VERTEX_POINT('',#48425); +#48425 = CARTESIAN_POINT('',(0.1,-4.3,0.9)); +#48426 = LINE('',#48427,#48428); +#48427 = CARTESIAN_POINT('',(0.1,-4.3,3.874298700712)); +#48428 = VECTOR('',#48429,1.); +#48429 = DIRECTION('',(-0.,0.,-1.)); +#48430 = ORIENTED_EDGE('',*,*,#48431,.T.); +#48431 = EDGE_CURVE('',#48424,#48287,#48432,.T.); +#48432 = LINE('',#48433,#48434); +#48433 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#48434 = VECTOR('',#48435,1.); +#48435 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48436 = ORIENTED_EDGE('',*,*,#48286,.F.); +#48437 = PLANE('',#48438); +#48438 = AXIS2_PLACEMENT_3D('',#48439,#48440,#48441); +#48439 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#48440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48441 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48442 = ADVANCED_FACE('',(#48443),#48468,.F.); +#48443 = FACE_BOUND('',#48444,.F.); +#48444 = EDGE_LOOP('',(#48445,#48453,#48461,#48467)); +#48445 = ORIENTED_EDGE('',*,*,#48446,.T.); +#48446 = EDGE_CURVE('',#45695,#48447,#48449,.T.); +#48447 = VERTEX_POINT('',#48448); +#48448 = CARTESIAN_POINT('',(0.3,-2.3,0.9)); +#48449 = LINE('',#48450,#48451); +#48450 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#48451 = VECTOR('',#48452,1.); +#48452 = DIRECTION('',(0.,-0.,-1.)); +#48453 = ORIENTED_EDGE('',*,*,#48454,.T.); +#48454 = EDGE_CURVE('',#48447,#48455,#48457,.T.); +#48455 = VERTEX_POINT('',#48456); +#48456 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#48457 = LINE('',#48458,#48459); +#48458 = CARTESIAN_POINT('',(0.3,-2.3,0.9)); +#48459 = VECTOR('',#48460,1.); +#48460 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48461 = ORIENTED_EDGE('',*,*,#48462,.F.); +#48462 = EDGE_CURVE('',#45704,#48455,#48463,.T.); +#48463 = LINE('',#48464,#48465); +#48464 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#48465 = VECTOR('',#48466,1.); +#48466 = DIRECTION('',(0.,-0.,-1.)); +#48467 = ORIENTED_EDGE('',*,*,#45711,.F.); +#48468 = PLANE('',#48469); +#48469 = AXIS2_PLACEMENT_3D('',#48470,#48471,#48472); +#48470 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#48471 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48472 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48473 = ADVANCED_FACE('',(#48474),#48524,.F.); +#48474 = FACE_BOUND('',#48475,.F.); +#48475 = EDGE_LOOP('',(#48476,#48477,#48478,#48486,#48494,#48502,#48510, + #48518)); +#48476 = ORIENTED_EDGE('',*,*,#45735,.F.); +#48477 = ORIENTED_EDGE('',*,*,#48462,.T.); +#48478 = ORIENTED_EDGE('',*,*,#48479,.T.); +#48479 = EDGE_CURVE('',#48455,#48480,#48482,.T.); +#48480 = VERTEX_POINT('',#48481); +#48481 = CARTESIAN_POINT('',(0.1,-1.7,0.9)); +#48482 = LINE('',#48483,#48484); +#48483 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#48484 = VECTOR('',#48485,1.); +#48485 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48486 = ORIENTED_EDGE('',*,*,#48487,.T.); +#48487 = EDGE_CURVE('',#48480,#48488,#48490,.T.); +#48488 = VERTEX_POINT('',#48489); +#48489 = CARTESIAN_POINT('',(0.1,-1.7,4.5)); +#48490 = LINE('',#48491,#48492); +#48491 = CARTESIAN_POINT('',(0.1,-1.7,3.874298700712)); +#48492 = VECTOR('',#48493,1.); +#48493 = DIRECTION('',(0.,-0.,1.)); +#48494 = ORIENTED_EDGE('',*,*,#48495,.F.); +#48495 = EDGE_CURVE('',#48496,#48488,#48498,.T.); +#48496 = VERTEX_POINT('',#48497); +#48497 = CARTESIAN_POINT('',(-0.1,-1.7,4.5)); +#48498 = LINE('',#48499,#48500); +#48499 = CARTESIAN_POINT('',(-0.1,-1.7,4.5)); +#48500 = VECTOR('',#48501,1.); +#48501 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48502 = ORIENTED_EDGE('',*,*,#48503,.F.); +#48503 = EDGE_CURVE('',#48504,#48496,#48506,.T.); +#48504 = VERTEX_POINT('',#48505); +#48505 = CARTESIAN_POINT('',(-0.1,-1.7,0.9)); +#48506 = LINE('',#48507,#48508); +#48507 = CARTESIAN_POINT('',(-0.1,-1.7,3.874298700712)); +#48508 = VECTOR('',#48509,1.); +#48509 = DIRECTION('',(0.,-0.,1.)); +#48510 = ORIENTED_EDGE('',*,*,#48511,.T.); +#48511 = EDGE_CURVE('',#48504,#48512,#48514,.T.); +#48512 = VERTEX_POINT('',#48513); +#48513 = CARTESIAN_POINT('',(-0.3,-1.7,0.9)); +#48514 = LINE('',#48515,#48516); +#48515 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#48516 = VECTOR('',#48517,1.); +#48517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48518 = ORIENTED_EDGE('',*,*,#48519,.F.); +#48519 = EDGE_CURVE('',#45728,#48512,#48520,.T.); +#48520 = LINE('',#48521,#48522); +#48521 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#48522 = VECTOR('',#48523,1.); +#48523 = DIRECTION('',(0.,-0.,-1.)); +#48524 = PLANE('',#48525); +#48525 = AXIS2_PLACEMENT_3D('',#48526,#48527,#48528); +#48526 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#48527 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48528 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48529 = ADVANCED_FACE('',(#48530),#48548,.F.); +#48530 = FACE_BOUND('',#48531,.F.); +#48531 = EDGE_LOOP('',(#48532,#48533,#48541,#48547)); +#48532 = ORIENTED_EDGE('',*,*,#48519,.T.); +#48533 = ORIENTED_EDGE('',*,*,#48534,.T.); +#48534 = EDGE_CURVE('',#48512,#48535,#48537,.T.); +#48535 = VERTEX_POINT('',#48536); +#48536 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#48537 = LINE('',#48538,#48539); +#48538 = CARTESIAN_POINT('',(-0.3,-1.7,0.9)); +#48539 = VECTOR('',#48540,1.); +#48540 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48541 = ORIENTED_EDGE('',*,*,#48542,.F.); +#48542 = EDGE_CURVE('',#45752,#48535,#48543,.T.); +#48543 = LINE('',#48544,#48545); +#48544 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#48545 = VECTOR('',#48546,1.); +#48546 = DIRECTION('',(0.,-0.,-1.)); +#48547 = ORIENTED_EDGE('',*,*,#45759,.F.); +#48548 = PLANE('',#48549); +#48549 = AXIS2_PLACEMENT_3D('',#48550,#48551,#48552); +#48550 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#48551 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48552 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48553 = ADVANCED_FACE('',(#48554),#48597,.F.); +#48554 = FACE_BOUND('',#48555,.F.); +#48555 = EDGE_LOOP('',(#48556,#48557,#48558,#48566,#48574,#48582,#48590, + #48596)); +#48556 = ORIENTED_EDGE('',*,*,#45776,.F.); +#48557 = ORIENTED_EDGE('',*,*,#48542,.T.); +#48558 = ORIENTED_EDGE('',*,*,#48559,.T.); +#48559 = EDGE_CURVE('',#48535,#48560,#48562,.T.); +#48560 = VERTEX_POINT('',#48561); +#48561 = CARTESIAN_POINT('',(-0.1,-2.3,0.9)); +#48562 = LINE('',#48563,#48564); +#48563 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#48564 = VECTOR('',#48565,1.); +#48565 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48566 = ORIENTED_EDGE('',*,*,#48567,.F.); +#48567 = EDGE_CURVE('',#48568,#48560,#48570,.T.); +#48568 = VERTEX_POINT('',#48569); +#48569 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#48570 = LINE('',#48571,#48572); +#48571 = CARTESIAN_POINT('',(-0.1,-2.3,3.874298700712)); +#48572 = VECTOR('',#48573,1.); +#48573 = DIRECTION('',(-0.,0.,-1.)); +#48574 = ORIENTED_EDGE('',*,*,#48575,.T.); +#48575 = EDGE_CURVE('',#48568,#48576,#48578,.T.); +#48576 = VERTEX_POINT('',#48577); +#48577 = CARTESIAN_POINT('',(0.1,-2.3,4.5)); +#48578 = LINE('',#48579,#48580); +#48579 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#48580 = VECTOR('',#48581,1.); +#48581 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48582 = ORIENTED_EDGE('',*,*,#48583,.T.); +#48583 = EDGE_CURVE('',#48576,#48584,#48586,.T.); +#48584 = VERTEX_POINT('',#48585); +#48585 = CARTESIAN_POINT('',(0.1,-2.3,0.9)); +#48586 = LINE('',#48587,#48588); +#48587 = CARTESIAN_POINT('',(0.1,-2.3,3.874298700712)); +#48588 = VECTOR('',#48589,1.); +#48589 = DIRECTION('',(-0.,0.,-1.)); +#48590 = ORIENTED_EDGE('',*,*,#48591,.T.); +#48591 = EDGE_CURVE('',#48584,#48447,#48592,.T.); +#48592 = LINE('',#48593,#48594); +#48593 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#48594 = VECTOR('',#48595,1.); +#48595 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48596 = ORIENTED_EDGE('',*,*,#48446,.F.); +#48597 = PLANE('',#48598); +#48598 = AXIS2_PLACEMENT_3D('',#48599,#48600,#48601); +#48599 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#48600 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48602 = ADVANCED_FACE('',(#48603),#48628,.F.); +#48603 = FACE_BOUND('',#48604,.F.); +#48604 = EDGE_LOOP('',(#48605,#48613,#48621,#48627)); +#48605 = ORIENTED_EDGE('',*,*,#48606,.T.); +#48606 = EDGE_CURVE('',#45791,#48607,#48609,.T.); +#48607 = VERTEX_POINT('',#48608); +#48608 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#48609 = LINE('',#48610,#48611); +#48610 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#48611 = VECTOR('',#48612,1.); +#48612 = DIRECTION('',(0.,-0.,-1.)); +#48613 = ORIENTED_EDGE('',*,*,#48614,.T.); +#48614 = EDGE_CURVE('',#48607,#48615,#48617,.T.); +#48615 = VERTEX_POINT('',#48616); +#48616 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#48617 = LINE('',#48618,#48619); +#48618 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#48619 = VECTOR('',#48620,1.); +#48620 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48621 = ORIENTED_EDGE('',*,*,#48622,.F.); +#48622 = EDGE_CURVE('',#45800,#48615,#48623,.T.); +#48623 = LINE('',#48624,#48625); +#48624 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#48625 = VECTOR('',#48626,1.); +#48626 = DIRECTION('',(0.,-0.,-1.)); +#48627 = ORIENTED_EDGE('',*,*,#45807,.F.); +#48628 = PLANE('',#48629); +#48629 = AXIS2_PLACEMENT_3D('',#48630,#48631,#48632); +#48630 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#48631 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48632 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48633 = ADVANCED_FACE('',(#48634),#48684,.F.); +#48634 = FACE_BOUND('',#48635,.F.); +#48635 = EDGE_LOOP('',(#48636,#48637,#48638,#48646,#48654,#48662,#48670, + #48678)); +#48636 = ORIENTED_EDGE('',*,*,#45831,.F.); +#48637 = ORIENTED_EDGE('',*,*,#48622,.T.); +#48638 = ORIENTED_EDGE('',*,*,#48639,.T.); +#48639 = EDGE_CURVE('',#48615,#48640,#48642,.T.); +#48640 = VERTEX_POINT('',#48641); +#48641 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#48642 = LINE('',#48643,#48644); +#48643 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#48644 = VECTOR('',#48645,1.); +#48645 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48646 = ORIENTED_EDGE('',*,*,#48647,.T.); +#48647 = EDGE_CURVE('',#48640,#48648,#48650,.T.); +#48648 = VERTEX_POINT('',#48649); +#48649 = CARTESIAN_POINT('',(0.1,0.3,4.5)); +#48650 = LINE('',#48651,#48652); +#48651 = CARTESIAN_POINT('',(0.1,0.3,3.874298700712)); +#48652 = VECTOR('',#48653,1.); +#48653 = DIRECTION('',(0.,-0.,1.)); +#48654 = ORIENTED_EDGE('',*,*,#48655,.F.); +#48655 = EDGE_CURVE('',#48656,#48648,#48658,.T.); +#48656 = VERTEX_POINT('',#48657); +#48657 = CARTESIAN_POINT('',(-0.1,0.3,4.5)); +#48658 = LINE('',#48659,#48660); +#48659 = CARTESIAN_POINT('',(-0.1,0.3,4.5)); +#48660 = VECTOR('',#48661,1.); +#48661 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48662 = ORIENTED_EDGE('',*,*,#48663,.F.); +#48663 = EDGE_CURVE('',#48664,#48656,#48666,.T.); +#48664 = VERTEX_POINT('',#48665); +#48665 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#48666 = LINE('',#48667,#48668); +#48667 = CARTESIAN_POINT('',(-0.1,0.3,3.874298700712)); +#48668 = VECTOR('',#48669,1.); +#48669 = DIRECTION('',(0.,-0.,1.)); +#48670 = ORIENTED_EDGE('',*,*,#48671,.T.); +#48671 = EDGE_CURVE('',#48664,#48672,#48674,.T.); +#48672 = VERTEX_POINT('',#48673); +#48673 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#48674 = LINE('',#48675,#48676); +#48675 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#48676 = VECTOR('',#48677,1.); +#48677 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48678 = ORIENTED_EDGE('',*,*,#48679,.F.); +#48679 = EDGE_CURVE('',#45824,#48672,#48680,.T.); +#48680 = LINE('',#48681,#48682); +#48681 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#48682 = VECTOR('',#48683,1.); +#48683 = DIRECTION('',(0.,-0.,-1.)); +#48684 = PLANE('',#48685); +#48685 = AXIS2_PLACEMENT_3D('',#48686,#48687,#48688); +#48686 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#48687 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48688 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48689 = ADVANCED_FACE('',(#48690),#48708,.F.); +#48690 = FACE_BOUND('',#48691,.F.); +#48691 = EDGE_LOOP('',(#48692,#48693,#48701,#48707)); +#48692 = ORIENTED_EDGE('',*,*,#48679,.T.); +#48693 = ORIENTED_EDGE('',*,*,#48694,.T.); +#48694 = EDGE_CURVE('',#48672,#48695,#48697,.T.); +#48695 = VERTEX_POINT('',#48696); +#48696 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#48697 = LINE('',#48698,#48699); +#48698 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#48699 = VECTOR('',#48700,1.); +#48700 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48701 = ORIENTED_EDGE('',*,*,#48702,.F.); +#48702 = EDGE_CURVE('',#45848,#48695,#48703,.T.); +#48703 = LINE('',#48704,#48705); +#48704 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#48705 = VECTOR('',#48706,1.); +#48706 = DIRECTION('',(0.,-0.,-1.)); +#48707 = ORIENTED_EDGE('',*,*,#45855,.F.); +#48708 = PLANE('',#48709); +#48709 = AXIS2_PLACEMENT_3D('',#48710,#48711,#48712); +#48710 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#48711 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#48712 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48713 = ADVANCED_FACE('',(#48714),#48757,.F.); +#48714 = FACE_BOUND('',#48715,.F.); +#48715 = EDGE_LOOP('',(#48716,#48717,#48718,#48726,#48734,#48742,#48750, + #48756)); +#48716 = ORIENTED_EDGE('',*,*,#45872,.F.); +#48717 = ORIENTED_EDGE('',*,*,#48702,.T.); +#48718 = ORIENTED_EDGE('',*,*,#48719,.T.); +#48719 = EDGE_CURVE('',#48695,#48720,#48722,.T.); +#48720 = VERTEX_POINT('',#48721); +#48721 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#48722 = LINE('',#48723,#48724); +#48723 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#48724 = VECTOR('',#48725,1.); +#48725 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48726 = ORIENTED_EDGE('',*,*,#48727,.F.); +#48727 = EDGE_CURVE('',#48728,#48720,#48730,.T.); +#48728 = VERTEX_POINT('',#48729); +#48729 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#48730 = LINE('',#48731,#48732); +#48731 = CARTESIAN_POINT('',(-0.1,-0.3,3.874298700712)); +#48732 = VECTOR('',#48733,1.); +#48733 = DIRECTION('',(-0.,0.,-1.)); +#48734 = ORIENTED_EDGE('',*,*,#48735,.T.); +#48735 = EDGE_CURVE('',#48728,#48736,#48738,.T.); +#48736 = VERTEX_POINT('',#48737); +#48737 = CARTESIAN_POINT('',(0.1,-0.3,4.5)); +#48738 = LINE('',#48739,#48740); +#48739 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#48740 = VECTOR('',#48741,1.); +#48741 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48742 = ORIENTED_EDGE('',*,*,#48743,.T.); +#48743 = EDGE_CURVE('',#48736,#48744,#48746,.T.); +#48744 = VERTEX_POINT('',#48745); +#48745 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#48746 = LINE('',#48747,#48748); +#48747 = CARTESIAN_POINT('',(0.1,-0.3,3.874298700712)); +#48748 = VECTOR('',#48749,1.); +#48749 = DIRECTION('',(-0.,0.,-1.)); +#48750 = ORIENTED_EDGE('',*,*,#48751,.T.); +#48751 = EDGE_CURVE('',#48744,#48607,#48752,.T.); +#48752 = LINE('',#48753,#48754); +#48753 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#48754 = VECTOR('',#48755,1.); +#48755 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48756 = ORIENTED_EDGE('',*,*,#48606,.F.); +#48757 = PLANE('',#48758); +#48758 = AXIS2_PLACEMENT_3D('',#48759,#48760,#48761); +#48759 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#48760 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48761 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48762 = ADVANCED_FACE('',(#48763),#48774,.T.); +#48763 = FACE_BOUND('',#48764,.T.); +#48764 = EDGE_LOOP('',(#48765,#48771,#48772,#48773)); +#48765 = ORIENTED_EDGE('',*,*,#48766,.T.); +#48766 = EDGE_CURVE('',#45968,#45904,#48767,.T.); +#48767 = LINE('',#48768,#48769); +#48768 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#48769 = VECTOR('',#48770,1.); +#48770 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48771 = ORIENTED_EDGE('',*,*,#45903,.T.); +#48772 = ORIENTED_EDGE('',*,*,#45888,.F.); +#48773 = ORIENTED_EDGE('',*,*,#45967,.F.); +#48774 = PLANE('',#48775); +#48775 = AXIS2_PLACEMENT_3D('',#48776,#48777,#48778); +#48776 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#48777 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48778 = DIRECTION('',(0.,0.,1.)); +#48779 = ADVANCED_FACE('',(#48780),#48791,.T.); +#48780 = FACE_BOUND('',#48781,.T.); +#48781 = EDGE_LOOP('',(#48782,#48788,#48789,#48790)); +#48782 = ORIENTED_EDGE('',*,*,#48783,.T.); +#48783 = EDGE_CURVE('',#45993,#45929,#48784,.T.); +#48784 = LINE('',#48785,#48786); +#48785 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#48786 = VECTOR('',#48787,1.); +#48787 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48788 = ORIENTED_EDGE('',*,*,#45936,.T.); +#48789 = ORIENTED_EDGE('',*,*,#48766,.F.); +#48790 = ORIENTED_EDGE('',*,*,#46000,.F.); +#48791 = PLANE('',#48792); +#48792 = AXIS2_PLACEMENT_3D('',#48793,#48794,#48795); +#48793 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#48794 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#48795 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#48796 = ADVANCED_FACE('',(#48797),#48808,.T.); +#48797 = FACE_BOUND('',#48798,.T.); +#48798 = EDGE_LOOP('',(#48799,#48805,#48806,#48807)); +#48799 = ORIENTED_EDGE('',*,*,#48800,.T.); +#48800 = EDGE_CURVE('',#45985,#45921,#48801,.T.); +#48801 = LINE('',#48802,#48803); +#48802 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#48803 = VECTOR('',#48804,1.); +#48804 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48805 = ORIENTED_EDGE('',*,*,#45928,.T.); +#48806 = ORIENTED_EDGE('',*,*,#48783,.F.); +#48807 = ORIENTED_EDGE('',*,*,#45992,.T.); +#48808 = PLANE('',#48809); +#48809 = AXIS2_PLACEMENT_3D('',#48810,#48811,#48812); +#48810 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#48811 = DIRECTION('',(0.,-0.,-1.)); +#48812 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48813 = ADVANCED_FACE('',(#48814),#48825,.T.); +#48814 = FACE_BOUND('',#48815,.T.); +#48815 = EDGE_LOOP('',(#48816,#48822,#48823,#48824)); +#48816 = ORIENTED_EDGE('',*,*,#48817,.T.); +#48817 = EDGE_CURVE('',#45977,#45913,#48818,.T.); +#48818 = LINE('',#48819,#48820); +#48819 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#48820 = VECTOR('',#48821,1.); +#48821 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48822 = ORIENTED_EDGE('',*,*,#45920,.T.); +#48823 = ORIENTED_EDGE('',*,*,#48800,.F.); +#48824 = ORIENTED_EDGE('',*,*,#45984,.F.); +#48825 = PLANE('',#48826); +#48826 = AXIS2_PLACEMENT_3D('',#48827,#48828,#48829); +#48827 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#48828 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#48829 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#48830 = ADVANCED_FACE('',(#48831),#48837,.T.); +#48831 = FACE_BOUND('',#48832,.T.); +#48832 = EDGE_LOOP('',(#48833,#48834,#48835,#48836)); +#48833 = ORIENTED_EDGE('',*,*,#45950,.T.); +#48834 = ORIENTED_EDGE('',*,*,#45912,.T.); +#48835 = ORIENTED_EDGE('',*,*,#48817,.F.); +#48836 = ORIENTED_EDGE('',*,*,#45976,.F.); +#48837 = PLANE('',#48838); +#48838 = AXIS2_PLACEMENT_3D('',#48839,#48840,#48841); +#48839 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#48840 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48841 = DIRECTION('',(0.,0.,-1.)); +#48842 = ADVANCED_FACE('',(#48843),#48854,.T.); +#48843 = FACE_BOUND('',#48844,.T.); +#48844 = EDGE_LOOP('',(#48845,#48851,#48852,#48853)); +#48845 = ORIENTED_EDGE('',*,*,#48846,.T.); +#48846 = EDGE_CURVE('',#46096,#46032,#48847,.T.); +#48847 = LINE('',#48848,#48849); +#48848 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#48849 = VECTOR('',#48850,1.); +#48850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48851 = ORIENTED_EDGE('',*,*,#46031,.T.); +#48852 = ORIENTED_EDGE('',*,*,#46016,.F.); +#48853 = ORIENTED_EDGE('',*,*,#46095,.F.); +#48854 = PLANE('',#48855); +#48855 = AXIS2_PLACEMENT_3D('',#48856,#48857,#48858); +#48856 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#48857 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48858 = DIRECTION('',(0.,0.,1.)); +#48859 = ADVANCED_FACE('',(#48860),#48871,.T.); +#48860 = FACE_BOUND('',#48861,.T.); +#48861 = EDGE_LOOP('',(#48862,#48868,#48869,#48870)); +#48862 = ORIENTED_EDGE('',*,*,#48863,.T.); +#48863 = EDGE_CURVE('',#46121,#46057,#48864,.T.); +#48864 = LINE('',#48865,#48866); +#48865 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#48866 = VECTOR('',#48867,1.); +#48867 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48868 = ORIENTED_EDGE('',*,*,#46064,.T.); +#48869 = ORIENTED_EDGE('',*,*,#48846,.F.); +#48870 = ORIENTED_EDGE('',*,*,#46128,.F.); +#48871 = PLANE('',#48872); +#48872 = AXIS2_PLACEMENT_3D('',#48873,#48874,#48875); +#48873 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#48874 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#48875 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#48876 = ADVANCED_FACE('',(#48877),#48888,.T.); +#48877 = FACE_BOUND('',#48878,.T.); +#48878 = EDGE_LOOP('',(#48879,#48885,#48886,#48887)); +#48879 = ORIENTED_EDGE('',*,*,#48880,.T.); +#48880 = EDGE_CURVE('',#46113,#46049,#48881,.T.); +#48881 = LINE('',#48882,#48883); +#48882 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#48883 = VECTOR('',#48884,1.); +#48884 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48885 = ORIENTED_EDGE('',*,*,#46056,.T.); +#48886 = ORIENTED_EDGE('',*,*,#48863,.F.); +#48887 = ORIENTED_EDGE('',*,*,#46120,.T.); +#48888 = PLANE('',#48889); +#48889 = AXIS2_PLACEMENT_3D('',#48890,#48891,#48892); +#48890 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#48891 = DIRECTION('',(0.,-0.,-1.)); +#48892 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48893 = ADVANCED_FACE('',(#48894),#48905,.T.); +#48894 = FACE_BOUND('',#48895,.T.); +#48895 = EDGE_LOOP('',(#48896,#48902,#48903,#48904)); +#48896 = ORIENTED_EDGE('',*,*,#48897,.T.); +#48897 = EDGE_CURVE('',#46105,#46041,#48898,.T.); +#48898 = LINE('',#48899,#48900); +#48899 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#48900 = VECTOR('',#48901,1.); +#48901 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48902 = ORIENTED_EDGE('',*,*,#46048,.T.); +#48903 = ORIENTED_EDGE('',*,*,#48880,.F.); +#48904 = ORIENTED_EDGE('',*,*,#46112,.F.); +#48905 = PLANE('',#48906); +#48906 = AXIS2_PLACEMENT_3D('',#48907,#48908,#48909); +#48907 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#48908 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#48909 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#48910 = ADVANCED_FACE('',(#48911),#48917,.T.); +#48911 = FACE_BOUND('',#48912,.T.); +#48912 = EDGE_LOOP('',(#48913,#48914,#48915,#48916)); +#48913 = ORIENTED_EDGE('',*,*,#46078,.T.); +#48914 = ORIENTED_EDGE('',*,*,#46040,.T.); +#48915 = ORIENTED_EDGE('',*,*,#48897,.F.); +#48916 = ORIENTED_EDGE('',*,*,#46104,.F.); +#48917 = PLANE('',#48918); +#48918 = AXIS2_PLACEMENT_3D('',#48919,#48920,#48921); +#48919 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#48920 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#48921 = DIRECTION('',(0.,0.,-1.)); +#48922 = ADVANCED_FACE('',(#48923),#48934,.T.); +#48923 = FACE_BOUND('',#48924,.T.); +#48924 = EDGE_LOOP('',(#48925,#48931,#48932,#48933)); +#48925 = ORIENTED_EDGE('',*,*,#48926,.T.); +#48926 = EDGE_CURVE('',#46224,#46160,#48927,.T.); +#48927 = LINE('',#48928,#48929); +#48928 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#48929 = VECTOR('',#48930,1.); +#48930 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48931 = ORIENTED_EDGE('',*,*,#46159,.T.); +#48932 = ORIENTED_EDGE('',*,*,#46144,.F.); +#48933 = ORIENTED_EDGE('',*,*,#46223,.F.); +#48934 = PLANE('',#48935); +#48935 = AXIS2_PLACEMENT_3D('',#48936,#48937,#48938); +#48936 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#48937 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48938 = DIRECTION('',(0.,0.,1.)); +#48939 = ADVANCED_FACE('',(#48940),#48951,.T.); +#48940 = FACE_BOUND('',#48941,.T.); +#48941 = EDGE_LOOP('',(#48942,#48948,#48949,#48950)); +#48942 = ORIENTED_EDGE('',*,*,#48943,.T.); +#48943 = EDGE_CURVE('',#46249,#46185,#48944,.T.); +#48944 = LINE('',#48945,#48946); +#48945 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#48946 = VECTOR('',#48947,1.); +#48947 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48948 = ORIENTED_EDGE('',*,*,#46192,.T.); +#48949 = ORIENTED_EDGE('',*,*,#48926,.F.); +#48950 = ORIENTED_EDGE('',*,*,#46256,.F.); +#48951 = PLANE('',#48952); +#48952 = AXIS2_PLACEMENT_3D('',#48953,#48954,#48955); +#48953 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#48954 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#48955 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#48956 = ADVANCED_FACE('',(#48957),#48968,.T.); +#48957 = FACE_BOUND('',#48958,.T.); +#48958 = EDGE_LOOP('',(#48959,#48965,#48966,#48967)); +#48959 = ORIENTED_EDGE('',*,*,#48960,.T.); +#48960 = EDGE_CURVE('',#46241,#46177,#48961,.T.); +#48961 = LINE('',#48962,#48963); +#48962 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#48963 = VECTOR('',#48964,1.); +#48964 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48965 = ORIENTED_EDGE('',*,*,#46184,.T.); +#48966 = ORIENTED_EDGE('',*,*,#48943,.F.); +#48967 = ORIENTED_EDGE('',*,*,#46248,.T.); +#48968 = PLANE('',#48969); +#48969 = AXIS2_PLACEMENT_3D('',#48970,#48971,#48972); +#48970 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#48971 = DIRECTION('',(0.,-0.,-1.)); +#48972 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#48973 = ADVANCED_FACE('',(#48974),#48985,.T.); +#48974 = FACE_BOUND('',#48975,.T.); +#48975 = EDGE_LOOP('',(#48976,#48982,#48983,#48984)); +#48976 = ORIENTED_EDGE('',*,*,#48977,.T.); +#48977 = EDGE_CURVE('',#46233,#46169,#48978,.T.); +#48978 = LINE('',#48979,#48980); +#48979 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#48980 = VECTOR('',#48981,1.); +#48981 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#48982 = ORIENTED_EDGE('',*,*,#46176,.T.); +#48983 = ORIENTED_EDGE('',*,*,#48960,.F.); +#48984 = ORIENTED_EDGE('',*,*,#46240,.F.); +#48985 = PLANE('',#48986); +#48986 = AXIS2_PLACEMENT_3D('',#48987,#48988,#48989); +#48987 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#48988 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#48989 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#48990 = ADVANCED_FACE('',(#48991),#48997,.T.); +#48991 = FACE_BOUND('',#48992,.T.); +#48992 = EDGE_LOOP('',(#48993,#48994,#48995,#48996)); +#48993 = ORIENTED_EDGE('',*,*,#46206,.T.); +#48994 = ORIENTED_EDGE('',*,*,#46168,.T.); +#48995 = ORIENTED_EDGE('',*,*,#48977,.F.); +#48996 = ORIENTED_EDGE('',*,*,#46232,.F.); +#48997 = PLANE('',#48998); +#48998 = AXIS2_PLACEMENT_3D('',#48999,#49000,#49001); +#48999 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#49000 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49001 = DIRECTION('',(0.,0.,-1.)); +#49002 = ADVANCED_FACE('',(#49003),#49014,.T.); +#49003 = FACE_BOUND('',#49004,.T.); +#49004 = EDGE_LOOP('',(#49005,#49011,#49012,#49013)); +#49005 = ORIENTED_EDGE('',*,*,#49006,.T.); +#49006 = EDGE_CURVE('',#46352,#46288,#49007,.T.); +#49007 = LINE('',#49008,#49009); +#49008 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#49009 = VECTOR('',#49010,1.); +#49010 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49011 = ORIENTED_EDGE('',*,*,#46287,.T.); +#49012 = ORIENTED_EDGE('',*,*,#46272,.F.); +#49013 = ORIENTED_EDGE('',*,*,#46351,.F.); +#49014 = PLANE('',#49015); +#49015 = AXIS2_PLACEMENT_3D('',#49016,#49017,#49018); +#49016 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#49017 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49018 = DIRECTION('',(0.,0.,1.)); +#49019 = ADVANCED_FACE('',(#49020),#49031,.T.); +#49020 = FACE_BOUND('',#49021,.T.); +#49021 = EDGE_LOOP('',(#49022,#49028,#49029,#49030)); +#49022 = ORIENTED_EDGE('',*,*,#49023,.T.); +#49023 = EDGE_CURVE('',#46377,#46313,#49024,.T.); +#49024 = LINE('',#49025,#49026); +#49025 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#49026 = VECTOR('',#49027,1.); +#49027 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49028 = ORIENTED_EDGE('',*,*,#46320,.T.); +#49029 = ORIENTED_EDGE('',*,*,#49006,.F.); +#49030 = ORIENTED_EDGE('',*,*,#46384,.F.); +#49031 = PLANE('',#49032); +#49032 = AXIS2_PLACEMENT_3D('',#49033,#49034,#49035); +#49033 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#49034 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49035 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49036 = ADVANCED_FACE('',(#49037),#49048,.T.); +#49037 = FACE_BOUND('',#49038,.T.); +#49038 = EDGE_LOOP('',(#49039,#49045,#49046,#49047)); +#49039 = ORIENTED_EDGE('',*,*,#49040,.T.); +#49040 = EDGE_CURVE('',#46369,#46305,#49041,.T.); +#49041 = LINE('',#49042,#49043); +#49042 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#49043 = VECTOR('',#49044,1.); +#49044 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49045 = ORIENTED_EDGE('',*,*,#46312,.T.); +#49046 = ORIENTED_EDGE('',*,*,#49023,.F.); +#49047 = ORIENTED_EDGE('',*,*,#46376,.T.); +#49048 = PLANE('',#49049); +#49049 = AXIS2_PLACEMENT_3D('',#49050,#49051,#49052); +#49050 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#49051 = DIRECTION('',(0.,-0.,-1.)); +#49052 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49053 = ADVANCED_FACE('',(#49054),#49065,.T.); +#49054 = FACE_BOUND('',#49055,.T.); +#49055 = EDGE_LOOP('',(#49056,#49062,#49063,#49064)); +#49056 = ORIENTED_EDGE('',*,*,#49057,.T.); +#49057 = EDGE_CURVE('',#46361,#46297,#49058,.T.); +#49058 = LINE('',#49059,#49060); +#49059 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#49060 = VECTOR('',#49061,1.); +#49061 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49062 = ORIENTED_EDGE('',*,*,#46304,.T.); +#49063 = ORIENTED_EDGE('',*,*,#49040,.F.); +#49064 = ORIENTED_EDGE('',*,*,#46368,.F.); +#49065 = PLANE('',#49066); +#49066 = AXIS2_PLACEMENT_3D('',#49067,#49068,#49069); +#49067 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#49068 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49069 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49070 = ADVANCED_FACE('',(#49071),#49077,.T.); +#49071 = FACE_BOUND('',#49072,.T.); +#49072 = EDGE_LOOP('',(#49073,#49074,#49075,#49076)); +#49073 = ORIENTED_EDGE('',*,*,#46334,.T.); +#49074 = ORIENTED_EDGE('',*,*,#46296,.T.); +#49075 = ORIENTED_EDGE('',*,*,#49057,.F.); +#49076 = ORIENTED_EDGE('',*,*,#46360,.F.); +#49077 = PLANE('',#49078); +#49078 = AXIS2_PLACEMENT_3D('',#49079,#49080,#49081); +#49079 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#49080 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49081 = DIRECTION('',(0.,0.,-1.)); +#49082 = ADVANCED_FACE('',(#49083),#49094,.T.); +#49083 = FACE_BOUND('',#49084,.T.); +#49084 = EDGE_LOOP('',(#49085,#49091,#49092,#49093)); +#49085 = ORIENTED_EDGE('',*,*,#49086,.T.); +#49086 = EDGE_CURVE('',#46480,#46416,#49087,.T.); +#49087 = LINE('',#49088,#49089); +#49088 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#49089 = VECTOR('',#49090,1.); +#49090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49091 = ORIENTED_EDGE('',*,*,#46415,.T.); +#49092 = ORIENTED_EDGE('',*,*,#46400,.F.); +#49093 = ORIENTED_EDGE('',*,*,#46479,.F.); +#49094 = PLANE('',#49095); +#49095 = AXIS2_PLACEMENT_3D('',#49096,#49097,#49098); +#49096 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#49097 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49098 = DIRECTION('',(0.,0.,1.)); +#49099 = ADVANCED_FACE('',(#49100),#49111,.T.); +#49100 = FACE_BOUND('',#49101,.T.); +#49101 = EDGE_LOOP('',(#49102,#49108,#49109,#49110)); +#49102 = ORIENTED_EDGE('',*,*,#49103,.T.); +#49103 = EDGE_CURVE('',#46505,#46441,#49104,.T.); +#49104 = LINE('',#49105,#49106); +#49105 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#49106 = VECTOR('',#49107,1.); +#49107 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49108 = ORIENTED_EDGE('',*,*,#46448,.T.); +#49109 = ORIENTED_EDGE('',*,*,#49086,.F.); +#49110 = ORIENTED_EDGE('',*,*,#46512,.F.); +#49111 = PLANE('',#49112); +#49112 = AXIS2_PLACEMENT_3D('',#49113,#49114,#49115); +#49113 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#49114 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49115 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49116 = ADVANCED_FACE('',(#49117),#49128,.T.); +#49117 = FACE_BOUND('',#49118,.T.); +#49118 = EDGE_LOOP('',(#49119,#49125,#49126,#49127)); +#49119 = ORIENTED_EDGE('',*,*,#49120,.T.); +#49120 = EDGE_CURVE('',#46497,#46433,#49121,.T.); +#49121 = LINE('',#49122,#49123); +#49122 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#49123 = VECTOR('',#49124,1.); +#49124 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49125 = ORIENTED_EDGE('',*,*,#46440,.T.); +#49126 = ORIENTED_EDGE('',*,*,#49103,.F.); +#49127 = ORIENTED_EDGE('',*,*,#46504,.T.); +#49128 = PLANE('',#49129); +#49129 = AXIS2_PLACEMENT_3D('',#49130,#49131,#49132); +#49130 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#49131 = DIRECTION('',(0.,-0.,-1.)); +#49132 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49133 = ADVANCED_FACE('',(#49134),#49145,.T.); +#49134 = FACE_BOUND('',#49135,.T.); +#49135 = EDGE_LOOP('',(#49136,#49142,#49143,#49144)); +#49136 = ORIENTED_EDGE('',*,*,#49137,.T.); +#49137 = EDGE_CURVE('',#46489,#46425,#49138,.T.); +#49138 = LINE('',#49139,#49140); +#49139 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#49140 = VECTOR('',#49141,1.); +#49141 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49142 = ORIENTED_EDGE('',*,*,#46432,.T.); +#49143 = ORIENTED_EDGE('',*,*,#49120,.F.); +#49144 = ORIENTED_EDGE('',*,*,#46496,.F.); +#49145 = PLANE('',#49146); +#49146 = AXIS2_PLACEMENT_3D('',#49147,#49148,#49149); +#49147 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#49148 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49149 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49150 = ADVANCED_FACE('',(#49151),#49157,.T.); +#49151 = FACE_BOUND('',#49152,.T.); +#49152 = EDGE_LOOP('',(#49153,#49154,#49155,#49156)); +#49153 = ORIENTED_EDGE('',*,*,#46462,.T.); +#49154 = ORIENTED_EDGE('',*,*,#46424,.T.); +#49155 = ORIENTED_EDGE('',*,*,#49137,.F.); +#49156 = ORIENTED_EDGE('',*,*,#46488,.F.); +#49157 = PLANE('',#49158); +#49158 = AXIS2_PLACEMENT_3D('',#49159,#49160,#49161); +#49159 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#49160 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49161 = DIRECTION('',(0.,0.,-1.)); +#49162 = ADVANCED_FACE('',(#49163),#49174,.T.); +#49163 = FACE_BOUND('',#49164,.T.); +#49164 = EDGE_LOOP('',(#49165,#49171,#49172,#49173)); +#49165 = ORIENTED_EDGE('',*,*,#49166,.T.); +#49166 = EDGE_CURVE('',#46608,#46544,#49167,.T.); +#49167 = LINE('',#49168,#49169); +#49168 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#49169 = VECTOR('',#49170,1.); +#49170 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49171 = ORIENTED_EDGE('',*,*,#46543,.T.); +#49172 = ORIENTED_EDGE('',*,*,#46528,.F.); +#49173 = ORIENTED_EDGE('',*,*,#46607,.F.); +#49174 = PLANE('',#49175); +#49175 = AXIS2_PLACEMENT_3D('',#49176,#49177,#49178); +#49176 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#49177 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49178 = DIRECTION('',(0.,0.,1.)); +#49179 = ADVANCED_FACE('',(#49180),#49191,.T.); +#49180 = FACE_BOUND('',#49181,.T.); +#49181 = EDGE_LOOP('',(#49182,#49188,#49189,#49190)); +#49182 = ORIENTED_EDGE('',*,*,#49183,.T.); +#49183 = EDGE_CURVE('',#46633,#46569,#49184,.T.); +#49184 = LINE('',#49185,#49186); +#49185 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#49186 = VECTOR('',#49187,1.); +#49187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49188 = ORIENTED_EDGE('',*,*,#46576,.T.); +#49189 = ORIENTED_EDGE('',*,*,#49166,.F.); +#49190 = ORIENTED_EDGE('',*,*,#46640,.F.); +#49191 = PLANE('',#49192); +#49192 = AXIS2_PLACEMENT_3D('',#49193,#49194,#49195); +#49193 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#49194 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49195 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49196 = ADVANCED_FACE('',(#49197),#49208,.T.); +#49197 = FACE_BOUND('',#49198,.T.); +#49198 = EDGE_LOOP('',(#49199,#49205,#49206,#49207)); +#49199 = ORIENTED_EDGE('',*,*,#49200,.T.); +#49200 = EDGE_CURVE('',#46625,#46561,#49201,.T.); +#49201 = LINE('',#49202,#49203); +#49202 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#49203 = VECTOR('',#49204,1.); +#49204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49205 = ORIENTED_EDGE('',*,*,#46568,.T.); +#49206 = ORIENTED_EDGE('',*,*,#49183,.F.); +#49207 = ORIENTED_EDGE('',*,*,#46632,.T.); +#49208 = PLANE('',#49209); +#49209 = AXIS2_PLACEMENT_3D('',#49210,#49211,#49212); +#49210 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#49211 = DIRECTION('',(0.,-0.,-1.)); +#49212 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49213 = ADVANCED_FACE('',(#49214),#49225,.T.); +#49214 = FACE_BOUND('',#49215,.T.); +#49215 = EDGE_LOOP('',(#49216,#49222,#49223,#49224)); +#49216 = ORIENTED_EDGE('',*,*,#49217,.T.); +#49217 = EDGE_CURVE('',#46617,#46553,#49218,.T.); +#49218 = LINE('',#49219,#49220); +#49219 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#49220 = VECTOR('',#49221,1.); +#49221 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49222 = ORIENTED_EDGE('',*,*,#46560,.T.); +#49223 = ORIENTED_EDGE('',*,*,#49200,.F.); +#49224 = ORIENTED_EDGE('',*,*,#46624,.F.); +#49225 = PLANE('',#49226); +#49226 = AXIS2_PLACEMENT_3D('',#49227,#49228,#49229); +#49227 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#49228 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49229 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49230 = ADVANCED_FACE('',(#49231),#49237,.T.); +#49231 = FACE_BOUND('',#49232,.T.); +#49232 = EDGE_LOOP('',(#49233,#49234,#49235,#49236)); +#49233 = ORIENTED_EDGE('',*,*,#46590,.T.); +#49234 = ORIENTED_EDGE('',*,*,#46552,.T.); +#49235 = ORIENTED_EDGE('',*,*,#49217,.F.); +#49236 = ORIENTED_EDGE('',*,*,#46616,.F.); +#49237 = PLANE('',#49238); +#49238 = AXIS2_PLACEMENT_3D('',#49239,#49240,#49241); +#49239 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#49240 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49241 = DIRECTION('',(0.,0.,-1.)); +#49242 = ADVANCED_FACE('',(#49243),#49254,.T.); +#49243 = FACE_BOUND('',#49244,.T.); +#49244 = EDGE_LOOP('',(#49245,#49251,#49252,#49253)); +#49245 = ORIENTED_EDGE('',*,*,#49246,.T.); +#49246 = EDGE_CURVE('',#46736,#46672,#49247,.T.); +#49247 = LINE('',#49248,#49249); +#49248 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#49249 = VECTOR('',#49250,1.); +#49250 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49251 = ORIENTED_EDGE('',*,*,#46671,.T.); +#49252 = ORIENTED_EDGE('',*,*,#46656,.F.); +#49253 = ORIENTED_EDGE('',*,*,#46735,.F.); +#49254 = PLANE('',#49255); +#49255 = AXIS2_PLACEMENT_3D('',#49256,#49257,#49258); +#49256 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#49257 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49258 = DIRECTION('',(0.,0.,1.)); +#49259 = ADVANCED_FACE('',(#49260),#49271,.T.); +#49260 = FACE_BOUND('',#49261,.T.); +#49261 = EDGE_LOOP('',(#49262,#49268,#49269,#49270)); +#49262 = ORIENTED_EDGE('',*,*,#49263,.T.); +#49263 = EDGE_CURVE('',#46761,#46697,#49264,.T.); +#49264 = LINE('',#49265,#49266); +#49265 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#49266 = VECTOR('',#49267,1.); +#49267 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49268 = ORIENTED_EDGE('',*,*,#46704,.T.); +#49269 = ORIENTED_EDGE('',*,*,#49246,.F.); +#49270 = ORIENTED_EDGE('',*,*,#46768,.F.); +#49271 = PLANE('',#49272); +#49272 = AXIS2_PLACEMENT_3D('',#49273,#49274,#49275); +#49273 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#49274 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49275 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49276 = ADVANCED_FACE('',(#49277),#49288,.T.); +#49277 = FACE_BOUND('',#49278,.T.); +#49278 = EDGE_LOOP('',(#49279,#49285,#49286,#49287)); +#49279 = ORIENTED_EDGE('',*,*,#49280,.T.); +#49280 = EDGE_CURVE('',#46753,#46689,#49281,.T.); +#49281 = LINE('',#49282,#49283); +#49282 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#49283 = VECTOR('',#49284,1.); +#49284 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49285 = ORIENTED_EDGE('',*,*,#46696,.T.); +#49286 = ORIENTED_EDGE('',*,*,#49263,.F.); +#49287 = ORIENTED_EDGE('',*,*,#46760,.T.); +#49288 = PLANE('',#49289); +#49289 = AXIS2_PLACEMENT_3D('',#49290,#49291,#49292); +#49290 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#49291 = DIRECTION('',(0.,-0.,-1.)); +#49292 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49293 = ADVANCED_FACE('',(#49294),#49305,.T.); +#49294 = FACE_BOUND('',#49295,.T.); +#49295 = EDGE_LOOP('',(#49296,#49302,#49303,#49304)); +#49296 = ORIENTED_EDGE('',*,*,#49297,.T.); +#49297 = EDGE_CURVE('',#46745,#46681,#49298,.T.); +#49298 = LINE('',#49299,#49300); +#49299 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#49300 = VECTOR('',#49301,1.); +#49301 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49302 = ORIENTED_EDGE('',*,*,#46688,.T.); +#49303 = ORIENTED_EDGE('',*,*,#49280,.F.); +#49304 = ORIENTED_EDGE('',*,*,#46752,.F.); +#49305 = PLANE('',#49306); +#49306 = AXIS2_PLACEMENT_3D('',#49307,#49308,#49309); +#49307 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#49308 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49309 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49310 = ADVANCED_FACE('',(#49311),#49317,.T.); +#49311 = FACE_BOUND('',#49312,.T.); +#49312 = EDGE_LOOP('',(#49313,#49314,#49315,#49316)); +#49313 = ORIENTED_EDGE('',*,*,#46718,.T.); +#49314 = ORIENTED_EDGE('',*,*,#46680,.T.); +#49315 = ORIENTED_EDGE('',*,*,#49297,.F.); +#49316 = ORIENTED_EDGE('',*,*,#46744,.F.); +#49317 = PLANE('',#49318); +#49318 = AXIS2_PLACEMENT_3D('',#49319,#49320,#49321); +#49319 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#49320 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49321 = DIRECTION('',(0.,0.,-1.)); +#49322 = ADVANCED_FACE('',(#49323),#49334,.T.); +#49323 = FACE_BOUND('',#49324,.T.); +#49324 = EDGE_LOOP('',(#49325,#49331,#49332,#49333)); +#49325 = ORIENTED_EDGE('',*,*,#49326,.T.); +#49326 = EDGE_CURVE('',#46864,#46800,#49327,.T.); +#49327 = LINE('',#49328,#49329); +#49328 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#49329 = VECTOR('',#49330,1.); +#49330 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49331 = ORIENTED_EDGE('',*,*,#46799,.T.); +#49332 = ORIENTED_EDGE('',*,*,#46784,.F.); +#49333 = ORIENTED_EDGE('',*,*,#46863,.F.); +#49334 = PLANE('',#49335); +#49335 = AXIS2_PLACEMENT_3D('',#49336,#49337,#49338); +#49336 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#49337 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49338 = DIRECTION('',(0.,0.,1.)); +#49339 = ADVANCED_FACE('',(#49340),#49351,.T.); +#49340 = FACE_BOUND('',#49341,.T.); +#49341 = EDGE_LOOP('',(#49342,#49348,#49349,#49350)); +#49342 = ORIENTED_EDGE('',*,*,#49343,.T.); +#49343 = EDGE_CURVE('',#46889,#46825,#49344,.T.); +#49344 = LINE('',#49345,#49346); +#49345 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#49346 = VECTOR('',#49347,1.); +#49347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49348 = ORIENTED_EDGE('',*,*,#46832,.T.); +#49349 = ORIENTED_EDGE('',*,*,#49326,.F.); +#49350 = ORIENTED_EDGE('',*,*,#46896,.F.); +#49351 = PLANE('',#49352); +#49352 = AXIS2_PLACEMENT_3D('',#49353,#49354,#49355); +#49353 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#49354 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49355 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49356 = ADVANCED_FACE('',(#49357),#49368,.T.); +#49357 = FACE_BOUND('',#49358,.T.); +#49358 = EDGE_LOOP('',(#49359,#49365,#49366,#49367)); +#49359 = ORIENTED_EDGE('',*,*,#49360,.T.); +#49360 = EDGE_CURVE('',#46881,#46817,#49361,.T.); +#49361 = LINE('',#49362,#49363); +#49362 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#49363 = VECTOR('',#49364,1.); +#49364 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49365 = ORIENTED_EDGE('',*,*,#46824,.T.); +#49366 = ORIENTED_EDGE('',*,*,#49343,.F.); +#49367 = ORIENTED_EDGE('',*,*,#46888,.T.); +#49368 = PLANE('',#49369); +#49369 = AXIS2_PLACEMENT_3D('',#49370,#49371,#49372); +#49370 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#49371 = DIRECTION('',(0.,-0.,-1.)); +#49372 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49373 = ADVANCED_FACE('',(#49374),#49385,.T.); +#49374 = FACE_BOUND('',#49375,.T.); +#49375 = EDGE_LOOP('',(#49376,#49382,#49383,#49384)); +#49376 = ORIENTED_EDGE('',*,*,#49377,.T.); +#49377 = EDGE_CURVE('',#46873,#46809,#49378,.T.); +#49378 = LINE('',#49379,#49380); +#49379 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#49380 = VECTOR('',#49381,1.); +#49381 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49382 = ORIENTED_EDGE('',*,*,#46816,.T.); +#49383 = ORIENTED_EDGE('',*,*,#49360,.F.); +#49384 = ORIENTED_EDGE('',*,*,#46880,.F.); +#49385 = PLANE('',#49386); +#49386 = AXIS2_PLACEMENT_3D('',#49387,#49388,#49389); +#49387 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#49388 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49389 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49390 = ADVANCED_FACE('',(#49391),#49397,.T.); +#49391 = FACE_BOUND('',#49392,.T.); +#49392 = EDGE_LOOP('',(#49393,#49394,#49395,#49396)); +#49393 = ORIENTED_EDGE('',*,*,#46846,.T.); +#49394 = ORIENTED_EDGE('',*,*,#46808,.T.); +#49395 = ORIENTED_EDGE('',*,*,#49377,.F.); +#49396 = ORIENTED_EDGE('',*,*,#46872,.F.); +#49397 = PLANE('',#49398); +#49398 = AXIS2_PLACEMENT_3D('',#49399,#49400,#49401); +#49399 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#49400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49401 = DIRECTION('',(0.,0.,-1.)); +#49402 = ADVANCED_FACE('',(#49403),#49414,.T.); +#49403 = FACE_BOUND('',#49404,.T.); +#49404 = EDGE_LOOP('',(#49405,#49411,#49412,#49413)); +#49405 = ORIENTED_EDGE('',*,*,#49406,.T.); +#49406 = EDGE_CURVE('',#46992,#46928,#49407,.T.); +#49407 = LINE('',#49408,#49409); +#49408 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#49409 = VECTOR('',#49410,1.); +#49410 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49411 = ORIENTED_EDGE('',*,*,#46927,.T.); +#49412 = ORIENTED_EDGE('',*,*,#46912,.F.); +#49413 = ORIENTED_EDGE('',*,*,#46991,.F.); +#49414 = PLANE('',#49415); +#49415 = AXIS2_PLACEMENT_3D('',#49416,#49417,#49418); +#49416 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#49417 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49418 = DIRECTION('',(0.,0.,1.)); +#49419 = ADVANCED_FACE('',(#49420),#49431,.T.); +#49420 = FACE_BOUND('',#49421,.T.); +#49421 = EDGE_LOOP('',(#49422,#49428,#49429,#49430)); +#49422 = ORIENTED_EDGE('',*,*,#49423,.T.); +#49423 = EDGE_CURVE('',#47017,#46953,#49424,.T.); +#49424 = LINE('',#49425,#49426); +#49425 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#49426 = VECTOR('',#49427,1.); +#49427 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49428 = ORIENTED_EDGE('',*,*,#46960,.T.); +#49429 = ORIENTED_EDGE('',*,*,#49406,.F.); +#49430 = ORIENTED_EDGE('',*,*,#47024,.F.); +#49431 = PLANE('',#49432); +#49432 = AXIS2_PLACEMENT_3D('',#49433,#49434,#49435); +#49433 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#49434 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49435 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49436 = ADVANCED_FACE('',(#49437),#49448,.T.); +#49437 = FACE_BOUND('',#49438,.T.); +#49438 = EDGE_LOOP('',(#49439,#49445,#49446,#49447)); +#49439 = ORIENTED_EDGE('',*,*,#49440,.T.); +#49440 = EDGE_CURVE('',#47009,#46945,#49441,.T.); +#49441 = LINE('',#49442,#49443); +#49442 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#49443 = VECTOR('',#49444,1.); +#49444 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49445 = ORIENTED_EDGE('',*,*,#46952,.T.); +#49446 = ORIENTED_EDGE('',*,*,#49423,.F.); +#49447 = ORIENTED_EDGE('',*,*,#47016,.T.); +#49448 = PLANE('',#49449); +#49449 = AXIS2_PLACEMENT_3D('',#49450,#49451,#49452); +#49450 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#49451 = DIRECTION('',(0.,-0.,-1.)); +#49452 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49453 = ADVANCED_FACE('',(#49454),#49465,.T.); +#49454 = FACE_BOUND('',#49455,.T.); +#49455 = EDGE_LOOP('',(#49456,#49462,#49463,#49464)); +#49456 = ORIENTED_EDGE('',*,*,#49457,.T.); +#49457 = EDGE_CURVE('',#47001,#46937,#49458,.T.); +#49458 = LINE('',#49459,#49460); +#49459 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#49460 = VECTOR('',#49461,1.); +#49461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49462 = ORIENTED_EDGE('',*,*,#46944,.T.); +#49463 = ORIENTED_EDGE('',*,*,#49440,.F.); +#49464 = ORIENTED_EDGE('',*,*,#47008,.F.); +#49465 = PLANE('',#49466); +#49466 = AXIS2_PLACEMENT_3D('',#49467,#49468,#49469); +#49467 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#49468 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49469 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49470 = ADVANCED_FACE('',(#49471),#49477,.T.); +#49471 = FACE_BOUND('',#49472,.T.); +#49472 = EDGE_LOOP('',(#49473,#49474,#49475,#49476)); +#49473 = ORIENTED_EDGE('',*,*,#46974,.T.); +#49474 = ORIENTED_EDGE('',*,*,#46936,.T.); +#49475 = ORIENTED_EDGE('',*,*,#49457,.F.); +#49476 = ORIENTED_EDGE('',*,*,#47000,.F.); +#49477 = PLANE('',#49478); +#49478 = AXIS2_PLACEMENT_3D('',#49479,#49480,#49481); +#49479 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#49480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49481 = DIRECTION('',(0.,0.,-1.)); +#49482 = ADVANCED_FACE('',(#49483),#49494,.T.); +#49483 = FACE_BOUND('',#49484,.T.); +#49484 = EDGE_LOOP('',(#49485,#49491,#49492,#49493)); +#49485 = ORIENTED_EDGE('',*,*,#49486,.T.); +#49486 = EDGE_CURVE('',#47120,#47056,#49487,.T.); +#49487 = LINE('',#49488,#49489); +#49488 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#49489 = VECTOR('',#49490,1.); +#49490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49491 = ORIENTED_EDGE('',*,*,#47055,.T.); +#49492 = ORIENTED_EDGE('',*,*,#47040,.F.); +#49493 = ORIENTED_EDGE('',*,*,#47119,.F.); +#49494 = PLANE('',#49495); +#49495 = AXIS2_PLACEMENT_3D('',#49496,#49497,#49498); +#49496 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#49497 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49498 = DIRECTION('',(0.,0.,1.)); +#49499 = ADVANCED_FACE('',(#49500),#49511,.T.); +#49500 = FACE_BOUND('',#49501,.T.); +#49501 = EDGE_LOOP('',(#49502,#49508,#49509,#49510)); +#49502 = ORIENTED_EDGE('',*,*,#49503,.T.); +#49503 = EDGE_CURVE('',#47145,#47081,#49504,.T.); +#49504 = LINE('',#49505,#49506); +#49505 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#49506 = VECTOR('',#49507,1.); +#49507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49508 = ORIENTED_EDGE('',*,*,#47088,.T.); +#49509 = ORIENTED_EDGE('',*,*,#49486,.F.); +#49510 = ORIENTED_EDGE('',*,*,#47152,.F.); +#49511 = PLANE('',#49512); +#49512 = AXIS2_PLACEMENT_3D('',#49513,#49514,#49515); +#49513 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#49514 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#49515 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#49516 = ADVANCED_FACE('',(#49517),#49528,.T.); +#49517 = FACE_BOUND('',#49518,.T.); +#49518 = EDGE_LOOP('',(#49519,#49525,#49526,#49527)); +#49519 = ORIENTED_EDGE('',*,*,#49520,.T.); +#49520 = EDGE_CURVE('',#47137,#47073,#49521,.T.); +#49521 = LINE('',#49522,#49523); +#49522 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#49523 = VECTOR('',#49524,1.); +#49524 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49525 = ORIENTED_EDGE('',*,*,#47080,.T.); +#49526 = ORIENTED_EDGE('',*,*,#49503,.F.); +#49527 = ORIENTED_EDGE('',*,*,#47144,.T.); +#49528 = PLANE('',#49529); +#49529 = AXIS2_PLACEMENT_3D('',#49530,#49531,#49532); +#49530 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#49531 = DIRECTION('',(0.,-0.,-1.)); +#49532 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49533 = ADVANCED_FACE('',(#49534),#49545,.T.); +#49534 = FACE_BOUND('',#49535,.T.); +#49535 = EDGE_LOOP('',(#49536,#49542,#49543,#49544)); +#49536 = ORIENTED_EDGE('',*,*,#49537,.T.); +#49537 = EDGE_CURVE('',#47129,#47065,#49538,.T.); +#49538 = LINE('',#49539,#49540); +#49539 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#49540 = VECTOR('',#49541,1.); +#49541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49542 = ORIENTED_EDGE('',*,*,#47072,.T.); +#49543 = ORIENTED_EDGE('',*,*,#49520,.F.); +#49544 = ORIENTED_EDGE('',*,*,#47136,.F.); +#49545 = PLANE('',#49546); +#49546 = AXIS2_PLACEMENT_3D('',#49547,#49548,#49549); +#49547 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#49548 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036 + )); +#49549 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#49550 = ADVANCED_FACE('',(#49551),#49557,.T.); +#49551 = FACE_BOUND('',#49552,.T.); +#49552 = EDGE_LOOP('',(#49553,#49554,#49555,#49556)); +#49553 = ORIENTED_EDGE('',*,*,#47102,.T.); +#49554 = ORIENTED_EDGE('',*,*,#47064,.T.); +#49555 = ORIENTED_EDGE('',*,*,#49537,.F.); +#49556 = ORIENTED_EDGE('',*,*,#47128,.F.); +#49557 = PLANE('',#49558); +#49558 = AXIS2_PLACEMENT_3D('',#49559,#49560,#49561); +#49559 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#49560 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49561 = DIRECTION('',(0.,0.,-1.)); +#49562 = ADVANCED_FACE('',(#49563),#49574,.T.); +#49563 = FACE_BOUND('',#49564,.T.); +#49564 = EDGE_LOOP('',(#49565,#49566,#49567,#49568)); +#49565 = ORIENTED_EDGE('',*,*,#47311,.T.); +#49566 = ORIENTED_EDGE('',*,*,#47174,.T.); +#49567 = ORIENTED_EDGE('',*,*,#47199,.T.); +#49568 = ORIENTED_EDGE('',*,*,#49569,.T.); +#49569 = EDGE_CURVE('',#47200,#47304,#49570,.T.); +#49570 = LINE('',#49571,#49572); +#49571 = CARTESIAN_POINT('',(0.1,-18.,0.9)); +#49572 = VECTOR('',#49573,1.); +#49573 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49574 = PLANE('',#49575); +#49575 = AXIS2_PLACEMENT_3D('',#49576,#49577,#49578); +#49576 = CARTESIAN_POINT('',(-1.97064586871E-15,-18.,0.9)); +#49577 = DIRECTION('',(0.,0.,1.)); +#49578 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49579 = ADVANCED_FACE('',(#49580),#49591,.T.); +#49580 = FACE_BOUND('',#49581,.T.); +#49581 = EDGE_LOOP('',(#49582,#49583,#49589,#49590)); +#49582 = ORIENTED_EDGE('',*,*,#47279,.T.); +#49583 = ORIENTED_EDGE('',*,*,#49584,.F.); +#49584 = EDGE_CURVE('',#47224,#47280,#49585,.T.); +#49585 = LINE('',#49586,#49587); +#49586 = CARTESIAN_POINT('',(-0.1,-18.,0.9)); +#49587 = VECTOR('',#49588,1.); +#49588 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49589 = ORIENTED_EDGE('',*,*,#47231,.T.); +#49590 = ORIENTED_EDGE('',*,*,#47254,.T.); +#49591 = PLANE('',#49592); +#49592 = AXIS2_PLACEMENT_3D('',#49593,#49594,#49595); +#49593 = CARTESIAN_POINT('',(-1.97064586871E-15,-18.,0.9)); +#49594 = DIRECTION('',(0.,0.,1.)); +#49595 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49596 = ADVANCED_FACE('',(#49597),#49640,.T.); +#49597 = FACE_BOUND('',#49598,.T.); +#49598 = EDGE_LOOP('',(#49599,#49600,#49608,#49616,#49624,#49632,#49638, + #49639)); +#49599 = ORIENTED_EDGE('',*,*,#47287,.F.); +#49600 = ORIENTED_EDGE('',*,*,#49601,.T.); +#49601 = EDGE_CURVE('',#47288,#49602,#49604,.T.); +#49602 = VERTEX_POINT('',#49603); +#49603 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#49604 = LINE('',#49605,#49606); +#49605 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#49606 = VECTOR('',#49607,1.); +#49607 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49608 = ORIENTED_EDGE('',*,*,#49609,.T.); +#49609 = EDGE_CURVE('',#49602,#49610,#49612,.T.); +#49610 = VERTEX_POINT('',#49611); +#49611 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#49612 = LINE('',#49613,#49614); +#49613 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#49614 = VECTOR('',#49615,1.); +#49615 = DIRECTION('',(0.,0.,-1.)); +#49616 = ORIENTED_EDGE('',*,*,#49617,.T.); +#49617 = EDGE_CURVE('',#49610,#49618,#49620,.T.); +#49618 = VERTEX_POINT('',#49619); +#49619 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#49620 = LINE('',#49621,#49622); +#49621 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#49622 = VECTOR('',#49623,1.); +#49623 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49624 = ORIENTED_EDGE('',*,*,#49625,.T.); +#49625 = EDGE_CURVE('',#49618,#49626,#49628,.T.); +#49626 = VERTEX_POINT('',#49627); +#49627 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49628 = LINE('',#49629,#49630); +#49629 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#49630 = VECTOR('',#49631,1.); +#49631 = DIRECTION('',(0.,0.,1.)); +#49632 = ORIENTED_EDGE('',*,*,#49633,.T.); +#49633 = EDGE_CURVE('',#49626,#47216,#49634,.T.); +#49634 = LINE('',#49635,#49636); +#49635 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49636 = VECTOR('',#49637,1.); +#49637 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49638 = ORIENTED_EDGE('',*,*,#47223,.F.); +#49639 = ORIENTED_EDGE('',*,*,#49584,.T.); +#49640 = PLANE('',#49641); +#49641 = AXIS2_PLACEMENT_3D('',#49642,#49643,#49644); +#49642 = CARTESIAN_POINT('',(-0.1,-18.,2.448597401424)); +#49643 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49644 = DIRECTION('',(0.,0.,1.)); +#49645 = ADVANCED_FACE('',(#49646),#49664,.T.); +#49646 = FACE_BOUND('',#49647,.T.); +#49647 = EDGE_LOOP('',(#49648,#49656,#49662,#49663)); +#49648 = ORIENTED_EDGE('',*,*,#49649,.T.); +#49649 = EDGE_CURVE('',#49626,#49650,#49652,.T.); +#49650 = VERTEX_POINT('',#49651); +#49651 = CARTESIAN_POINT('',(0.1,-17.75,4.45)); +#49652 = LINE('',#49653,#49654); +#49653 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49654 = VECTOR('',#49655,1.); +#49655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49656 = ORIENTED_EDGE('',*,*,#49657,.T.); +#49657 = EDGE_CURVE('',#49650,#47208,#49658,.T.); +#49658 = LINE('',#49659,#49660); +#49659 = CARTESIAN_POINT('',(0.1,-17.75,4.45)); +#49660 = VECTOR('',#49661,1.); +#49661 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49662 = ORIENTED_EDGE('',*,*,#47215,.F.); +#49663 = ORIENTED_EDGE('',*,*,#49633,.F.); +#49664 = PLANE('',#49665); +#49665 = AXIS2_PLACEMENT_3D('',#49666,#49667,#49668); +#49666 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#49667 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#49668 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49669 = ADVANCED_FACE('',(#49670),#49706,.F.); +#49670 = FACE_BOUND('',#49671,.F.); +#49671 = EDGE_LOOP('',(#49672,#49673,#49681,#49689,#49697,#49703,#49704, + #49705)); +#49672 = ORIENTED_EDGE('',*,*,#47303,.F.); +#49673 = ORIENTED_EDGE('',*,*,#49674,.T.); +#49674 = EDGE_CURVE('',#47296,#49675,#49677,.T.); +#49675 = VERTEX_POINT('',#49676); +#49676 = CARTESIAN_POINT('',(0.1,-18.25,4.45)); +#49677 = LINE('',#49678,#49679); +#49678 = CARTESIAN_POINT('',(0.1,-18.3,4.5)); +#49679 = VECTOR('',#49680,1.); +#49680 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49681 = ORIENTED_EDGE('',*,*,#49682,.T.); +#49682 = EDGE_CURVE('',#49675,#49683,#49685,.T.); +#49683 = VERTEX_POINT('',#49684); +#49684 = CARTESIAN_POINT('',(0.1,-18.25,1.25)); +#49685 = LINE('',#49686,#49687); +#49686 = CARTESIAN_POINT('',(0.1,-18.25,4.45)); +#49687 = VECTOR('',#49688,1.); +#49688 = DIRECTION('',(0.,0.,-1.)); +#49689 = ORIENTED_EDGE('',*,*,#49690,.T.); +#49690 = EDGE_CURVE('',#49683,#49691,#49693,.T.); +#49691 = VERTEX_POINT('',#49692); +#49692 = CARTESIAN_POINT('',(0.1,-17.75,1.25)); +#49693 = LINE('',#49694,#49695); +#49694 = CARTESIAN_POINT('',(0.1,-18.25,1.25)); +#49695 = VECTOR('',#49696,1.); +#49696 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49697 = ORIENTED_EDGE('',*,*,#49698,.T.); +#49698 = EDGE_CURVE('',#49691,#49650,#49699,.T.); +#49699 = LINE('',#49700,#49701); +#49700 = CARTESIAN_POINT('',(0.1,-17.75,1.25)); +#49701 = VECTOR('',#49702,1.); +#49702 = DIRECTION('',(0.,0.,1.)); +#49703 = ORIENTED_EDGE('',*,*,#49657,.T.); +#49704 = ORIENTED_EDGE('',*,*,#47207,.F.); +#49705 = ORIENTED_EDGE('',*,*,#49569,.T.); +#49706 = PLANE('',#49707); +#49707 = AXIS2_PLACEMENT_3D('',#49708,#49709,#49710); +#49708 = CARTESIAN_POINT('',(0.1,-18.,2.448597401424)); +#49709 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49710 = DIRECTION('',(0.,0.,1.)); +#49711 = ADVANCED_FACE('',(#49712),#49723,.T.); +#49712 = FACE_BOUND('',#49713,.T.); +#49713 = EDGE_LOOP('',(#49714,#49715,#49716,#49722)); +#49714 = ORIENTED_EDGE('',*,*,#47295,.T.); +#49715 = ORIENTED_EDGE('',*,*,#49674,.T.); +#49716 = ORIENTED_EDGE('',*,*,#49717,.F.); +#49717 = EDGE_CURVE('',#49602,#49675,#49718,.T.); +#49718 = LINE('',#49719,#49720); +#49719 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#49720 = VECTOR('',#49721,1.); +#49721 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49722 = ORIENTED_EDGE('',*,*,#49601,.F.); +#49723 = PLANE('',#49724); +#49724 = AXIS2_PLACEMENT_3D('',#49725,#49726,#49727); +#49725 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#49726 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49727 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49728 = ADVANCED_FACE('',(#49729),#49740,.T.); +#49729 = FACE_BOUND('',#49730,.T.); +#49730 = EDGE_LOOP('',(#49731,#49732,#49733,#49734)); +#49731 = ORIENTED_EDGE('',*,*,#47471,.T.); +#49732 = ORIENTED_EDGE('',*,*,#47334,.T.); +#49733 = ORIENTED_EDGE('',*,*,#47359,.T.); +#49734 = ORIENTED_EDGE('',*,*,#49735,.T.); +#49735 = EDGE_CURVE('',#47360,#47464,#49736,.T.); +#49736 = LINE('',#49737,#49738); +#49737 = CARTESIAN_POINT('',(0.1,-16.,0.9)); +#49738 = VECTOR('',#49739,1.); +#49739 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49740 = PLANE('',#49741); +#49741 = AXIS2_PLACEMENT_3D('',#49742,#49743,#49744); +#49742 = CARTESIAN_POINT('',(-1.748601263785E-15,-16.,0.9)); +#49743 = DIRECTION('',(0.,0.,1.)); +#49744 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49745 = ADVANCED_FACE('',(#49746),#49757,.T.); +#49746 = FACE_BOUND('',#49747,.T.); +#49747 = EDGE_LOOP('',(#49748,#49749,#49755,#49756)); +#49748 = ORIENTED_EDGE('',*,*,#47439,.T.); +#49749 = ORIENTED_EDGE('',*,*,#49750,.F.); +#49750 = EDGE_CURVE('',#47384,#47440,#49751,.T.); +#49751 = LINE('',#49752,#49753); +#49752 = CARTESIAN_POINT('',(-0.1,-16.,0.9)); +#49753 = VECTOR('',#49754,1.); +#49754 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49755 = ORIENTED_EDGE('',*,*,#47391,.T.); +#49756 = ORIENTED_EDGE('',*,*,#47414,.T.); +#49757 = PLANE('',#49758); +#49758 = AXIS2_PLACEMENT_3D('',#49759,#49760,#49761); +#49759 = CARTESIAN_POINT('',(-1.748601263785E-15,-16.,0.9)); +#49760 = DIRECTION('',(0.,0.,1.)); +#49761 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49762 = ADVANCED_FACE('',(#49763),#49806,.T.); +#49763 = FACE_BOUND('',#49764,.T.); +#49764 = EDGE_LOOP('',(#49765,#49766,#49774,#49782,#49790,#49798,#49804, + #49805)); +#49765 = ORIENTED_EDGE('',*,*,#47447,.F.); +#49766 = ORIENTED_EDGE('',*,*,#49767,.T.); +#49767 = EDGE_CURVE('',#47448,#49768,#49770,.T.); +#49768 = VERTEX_POINT('',#49769); +#49769 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#49770 = LINE('',#49771,#49772); +#49771 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#49772 = VECTOR('',#49773,1.); +#49773 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49774 = ORIENTED_EDGE('',*,*,#49775,.T.); +#49775 = EDGE_CURVE('',#49768,#49776,#49778,.T.); +#49776 = VERTEX_POINT('',#49777); +#49777 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#49778 = LINE('',#49779,#49780); +#49779 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#49780 = VECTOR('',#49781,1.); +#49781 = DIRECTION('',(0.,0.,-1.)); +#49782 = ORIENTED_EDGE('',*,*,#49783,.T.); +#49783 = EDGE_CURVE('',#49776,#49784,#49786,.T.); +#49784 = VERTEX_POINT('',#49785); +#49785 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#49786 = LINE('',#49787,#49788); +#49787 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#49788 = VECTOR('',#49789,1.); +#49789 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49790 = ORIENTED_EDGE('',*,*,#49791,.T.); +#49791 = EDGE_CURVE('',#49784,#49792,#49794,.T.); +#49792 = VERTEX_POINT('',#49793); +#49793 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49794 = LINE('',#49795,#49796); +#49795 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#49796 = VECTOR('',#49797,1.); +#49797 = DIRECTION('',(0.,0.,1.)); +#49798 = ORIENTED_EDGE('',*,*,#49799,.T.); +#49799 = EDGE_CURVE('',#49792,#47376,#49800,.T.); +#49800 = LINE('',#49801,#49802); +#49801 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49802 = VECTOR('',#49803,1.); +#49803 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49804 = ORIENTED_EDGE('',*,*,#47383,.F.); +#49805 = ORIENTED_EDGE('',*,*,#49750,.T.); +#49806 = PLANE('',#49807); +#49807 = AXIS2_PLACEMENT_3D('',#49808,#49809,#49810); +#49808 = CARTESIAN_POINT('',(-0.1,-16.,2.448597401424)); +#49809 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49810 = DIRECTION('',(0.,0.,1.)); +#49811 = ADVANCED_FACE('',(#49812),#49830,.T.); +#49812 = FACE_BOUND('',#49813,.T.); +#49813 = EDGE_LOOP('',(#49814,#49822,#49828,#49829)); +#49814 = ORIENTED_EDGE('',*,*,#49815,.T.); +#49815 = EDGE_CURVE('',#49792,#49816,#49818,.T.); +#49816 = VERTEX_POINT('',#49817); +#49817 = CARTESIAN_POINT('',(0.1,-15.75,4.45)); +#49818 = LINE('',#49819,#49820); +#49819 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49820 = VECTOR('',#49821,1.); +#49821 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49822 = ORIENTED_EDGE('',*,*,#49823,.T.); +#49823 = EDGE_CURVE('',#49816,#47368,#49824,.T.); +#49824 = LINE('',#49825,#49826); +#49825 = CARTESIAN_POINT('',(0.1,-15.75,4.45)); +#49826 = VECTOR('',#49827,1.); +#49827 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49828 = ORIENTED_EDGE('',*,*,#47375,.F.); +#49829 = ORIENTED_EDGE('',*,*,#49799,.F.); +#49830 = PLANE('',#49831); +#49831 = AXIS2_PLACEMENT_3D('',#49832,#49833,#49834); +#49832 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#49833 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#49834 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49835 = ADVANCED_FACE('',(#49836),#49872,.F.); +#49836 = FACE_BOUND('',#49837,.F.); +#49837 = EDGE_LOOP('',(#49838,#49839,#49847,#49855,#49863,#49869,#49870, + #49871)); +#49838 = ORIENTED_EDGE('',*,*,#47463,.F.); +#49839 = ORIENTED_EDGE('',*,*,#49840,.T.); +#49840 = EDGE_CURVE('',#47456,#49841,#49843,.T.); +#49841 = VERTEX_POINT('',#49842); +#49842 = CARTESIAN_POINT('',(0.1,-16.25,4.45)); +#49843 = LINE('',#49844,#49845); +#49844 = CARTESIAN_POINT('',(0.1,-16.3,4.5)); +#49845 = VECTOR('',#49846,1.); +#49846 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49847 = ORIENTED_EDGE('',*,*,#49848,.T.); +#49848 = EDGE_CURVE('',#49841,#49849,#49851,.T.); +#49849 = VERTEX_POINT('',#49850); +#49850 = CARTESIAN_POINT('',(0.1,-16.25,1.25)); +#49851 = LINE('',#49852,#49853); +#49852 = CARTESIAN_POINT('',(0.1,-16.25,4.45)); +#49853 = VECTOR('',#49854,1.); +#49854 = DIRECTION('',(0.,0.,-1.)); +#49855 = ORIENTED_EDGE('',*,*,#49856,.T.); +#49856 = EDGE_CURVE('',#49849,#49857,#49859,.T.); +#49857 = VERTEX_POINT('',#49858); +#49858 = CARTESIAN_POINT('',(0.1,-15.75,1.25)); +#49859 = LINE('',#49860,#49861); +#49860 = CARTESIAN_POINT('',(0.1,-16.25,1.25)); +#49861 = VECTOR('',#49862,1.); +#49862 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49863 = ORIENTED_EDGE('',*,*,#49864,.T.); +#49864 = EDGE_CURVE('',#49857,#49816,#49865,.T.); +#49865 = LINE('',#49866,#49867); +#49866 = CARTESIAN_POINT('',(0.1,-15.75,1.25)); +#49867 = VECTOR('',#49868,1.); +#49868 = DIRECTION('',(0.,0.,1.)); +#49869 = ORIENTED_EDGE('',*,*,#49823,.T.); +#49870 = ORIENTED_EDGE('',*,*,#47367,.F.); +#49871 = ORIENTED_EDGE('',*,*,#49735,.T.); +#49872 = PLANE('',#49873); +#49873 = AXIS2_PLACEMENT_3D('',#49874,#49875,#49876); +#49874 = CARTESIAN_POINT('',(0.1,-16.,2.448597401424)); +#49875 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49876 = DIRECTION('',(0.,0.,1.)); +#49877 = ADVANCED_FACE('',(#49878),#49889,.T.); +#49878 = FACE_BOUND('',#49879,.T.); +#49879 = EDGE_LOOP('',(#49880,#49881,#49882,#49888)); +#49880 = ORIENTED_EDGE('',*,*,#47455,.T.); +#49881 = ORIENTED_EDGE('',*,*,#49840,.T.); +#49882 = ORIENTED_EDGE('',*,*,#49883,.F.); +#49883 = EDGE_CURVE('',#49768,#49841,#49884,.T.); +#49884 = LINE('',#49885,#49886); +#49885 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#49886 = VECTOR('',#49887,1.); +#49887 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49888 = ORIENTED_EDGE('',*,*,#49767,.F.); +#49889 = PLANE('',#49890); +#49890 = AXIS2_PLACEMENT_3D('',#49891,#49892,#49893); +#49891 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#49892 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49893 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49894 = ADVANCED_FACE('',(#49895),#49906,.T.); +#49895 = FACE_BOUND('',#49896,.T.); +#49896 = EDGE_LOOP('',(#49897,#49898,#49899,#49900)); +#49897 = ORIENTED_EDGE('',*,*,#47631,.T.); +#49898 = ORIENTED_EDGE('',*,*,#47494,.T.); +#49899 = ORIENTED_EDGE('',*,*,#47519,.T.); +#49900 = ORIENTED_EDGE('',*,*,#49901,.T.); +#49901 = EDGE_CURVE('',#47520,#47624,#49902,.T.); +#49902 = LINE('',#49903,#49904); +#49903 = CARTESIAN_POINT('',(0.1,-14.,0.9)); +#49904 = VECTOR('',#49905,1.); +#49905 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49906 = PLANE('',#49907); +#49907 = AXIS2_PLACEMENT_3D('',#49908,#49909,#49910); +#49908 = CARTESIAN_POINT('',(-1.52655665886E-15,-14.,0.9)); +#49909 = DIRECTION('',(0.,0.,1.)); +#49910 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49911 = ADVANCED_FACE('',(#49912),#49923,.T.); +#49912 = FACE_BOUND('',#49913,.T.); +#49913 = EDGE_LOOP('',(#49914,#49915,#49921,#49922)); +#49914 = ORIENTED_EDGE('',*,*,#47599,.T.); +#49915 = ORIENTED_EDGE('',*,*,#49916,.F.); +#49916 = EDGE_CURVE('',#47544,#47600,#49917,.T.); +#49917 = LINE('',#49918,#49919); +#49918 = CARTESIAN_POINT('',(-0.1,-14.,0.9)); +#49919 = VECTOR('',#49920,1.); +#49920 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#49921 = ORIENTED_EDGE('',*,*,#47551,.T.); +#49922 = ORIENTED_EDGE('',*,*,#47574,.T.); +#49923 = PLANE('',#49924); +#49924 = AXIS2_PLACEMENT_3D('',#49925,#49926,#49927); +#49925 = CARTESIAN_POINT('',(-1.52655665886E-15,-14.,0.9)); +#49926 = DIRECTION('',(0.,0.,1.)); +#49927 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#49928 = ADVANCED_FACE('',(#49929),#49972,.T.); +#49929 = FACE_BOUND('',#49930,.T.); +#49930 = EDGE_LOOP('',(#49931,#49932,#49940,#49948,#49956,#49964,#49970, + #49971)); +#49931 = ORIENTED_EDGE('',*,*,#47607,.F.); +#49932 = ORIENTED_EDGE('',*,*,#49933,.T.); +#49933 = EDGE_CURVE('',#47608,#49934,#49936,.T.); +#49934 = VERTEX_POINT('',#49935); +#49935 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#49936 = LINE('',#49937,#49938); +#49937 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#49938 = VECTOR('',#49939,1.); +#49939 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#49940 = ORIENTED_EDGE('',*,*,#49941,.T.); +#49941 = EDGE_CURVE('',#49934,#49942,#49944,.T.); +#49942 = VERTEX_POINT('',#49943); +#49943 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#49944 = LINE('',#49945,#49946); +#49945 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#49946 = VECTOR('',#49947,1.); +#49947 = DIRECTION('',(0.,0.,-1.)); +#49948 = ORIENTED_EDGE('',*,*,#49949,.T.); +#49949 = EDGE_CURVE('',#49942,#49950,#49952,.T.); +#49950 = VERTEX_POINT('',#49951); +#49951 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#49952 = LINE('',#49953,#49954); +#49953 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#49954 = VECTOR('',#49955,1.); +#49955 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#49956 = ORIENTED_EDGE('',*,*,#49957,.T.); +#49957 = EDGE_CURVE('',#49950,#49958,#49960,.T.); +#49958 = VERTEX_POINT('',#49959); +#49959 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49960 = LINE('',#49961,#49962); +#49961 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#49962 = VECTOR('',#49963,1.); +#49963 = DIRECTION('',(0.,0.,1.)); +#49964 = ORIENTED_EDGE('',*,*,#49965,.T.); +#49965 = EDGE_CURVE('',#49958,#47536,#49966,.T.); +#49966 = LINE('',#49967,#49968); +#49967 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49968 = VECTOR('',#49969,1.); +#49969 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49970 = ORIENTED_EDGE('',*,*,#47543,.F.); +#49971 = ORIENTED_EDGE('',*,*,#49916,.T.); +#49972 = PLANE('',#49973); +#49973 = AXIS2_PLACEMENT_3D('',#49974,#49975,#49976); +#49974 = CARTESIAN_POINT('',(-0.1,-14.,2.448597401424)); +#49975 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#49976 = DIRECTION('',(0.,0.,1.)); +#49977 = ADVANCED_FACE('',(#49978),#49996,.T.); +#49978 = FACE_BOUND('',#49979,.T.); +#49979 = EDGE_LOOP('',(#49980,#49988,#49994,#49995)); +#49980 = ORIENTED_EDGE('',*,*,#49981,.T.); +#49981 = EDGE_CURVE('',#49958,#49982,#49984,.T.); +#49982 = VERTEX_POINT('',#49983); +#49983 = CARTESIAN_POINT('',(0.1,-13.75,4.45)); +#49984 = LINE('',#49985,#49986); +#49985 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49986 = VECTOR('',#49987,1.); +#49987 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#49988 = ORIENTED_EDGE('',*,*,#49989,.T.); +#49989 = EDGE_CURVE('',#49982,#47528,#49990,.T.); +#49990 = LINE('',#49991,#49992); +#49991 = CARTESIAN_POINT('',(0.1,-13.75,4.45)); +#49992 = VECTOR('',#49993,1.); +#49993 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#49994 = ORIENTED_EDGE('',*,*,#47535,.F.); +#49995 = ORIENTED_EDGE('',*,*,#49965,.F.); +#49996 = PLANE('',#49997); +#49997 = AXIS2_PLACEMENT_3D('',#49998,#49999,#50000); +#49998 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#49999 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50000 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50001 = ADVANCED_FACE('',(#50002),#50038,.F.); +#50002 = FACE_BOUND('',#50003,.F.); +#50003 = EDGE_LOOP('',(#50004,#50005,#50013,#50021,#50029,#50035,#50036, + #50037)); +#50004 = ORIENTED_EDGE('',*,*,#47623,.F.); +#50005 = ORIENTED_EDGE('',*,*,#50006,.T.); +#50006 = EDGE_CURVE('',#47616,#50007,#50009,.T.); +#50007 = VERTEX_POINT('',#50008); +#50008 = CARTESIAN_POINT('',(0.1,-14.25,4.45)); +#50009 = LINE('',#50010,#50011); +#50010 = CARTESIAN_POINT('',(0.1,-14.3,4.5)); +#50011 = VECTOR('',#50012,1.); +#50012 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50013 = ORIENTED_EDGE('',*,*,#50014,.T.); +#50014 = EDGE_CURVE('',#50007,#50015,#50017,.T.); +#50015 = VERTEX_POINT('',#50016); +#50016 = CARTESIAN_POINT('',(0.1,-14.25,1.25)); +#50017 = LINE('',#50018,#50019); +#50018 = CARTESIAN_POINT('',(0.1,-14.25,4.45)); +#50019 = VECTOR('',#50020,1.); +#50020 = DIRECTION('',(0.,0.,-1.)); +#50021 = ORIENTED_EDGE('',*,*,#50022,.T.); +#50022 = EDGE_CURVE('',#50015,#50023,#50025,.T.); +#50023 = VERTEX_POINT('',#50024); +#50024 = CARTESIAN_POINT('',(0.1,-13.75,1.25)); +#50025 = LINE('',#50026,#50027); +#50026 = CARTESIAN_POINT('',(0.1,-14.25,1.25)); +#50027 = VECTOR('',#50028,1.); +#50028 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50029 = ORIENTED_EDGE('',*,*,#50030,.T.); +#50030 = EDGE_CURVE('',#50023,#49982,#50031,.T.); +#50031 = LINE('',#50032,#50033); +#50032 = CARTESIAN_POINT('',(0.1,-13.75,1.25)); +#50033 = VECTOR('',#50034,1.); +#50034 = DIRECTION('',(0.,0.,1.)); +#50035 = ORIENTED_EDGE('',*,*,#49989,.T.); +#50036 = ORIENTED_EDGE('',*,*,#47527,.F.); +#50037 = ORIENTED_EDGE('',*,*,#49901,.T.); +#50038 = PLANE('',#50039); +#50039 = AXIS2_PLACEMENT_3D('',#50040,#50041,#50042); +#50040 = CARTESIAN_POINT('',(0.1,-14.,2.448597401424)); +#50041 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50042 = DIRECTION('',(0.,0.,1.)); +#50043 = ADVANCED_FACE('',(#50044),#50055,.T.); +#50044 = FACE_BOUND('',#50045,.T.); +#50045 = EDGE_LOOP('',(#50046,#50047,#50048,#50054)); +#50046 = ORIENTED_EDGE('',*,*,#47615,.T.); +#50047 = ORIENTED_EDGE('',*,*,#50006,.T.); +#50048 = ORIENTED_EDGE('',*,*,#50049,.F.); +#50049 = EDGE_CURVE('',#49934,#50007,#50050,.T.); +#50050 = LINE('',#50051,#50052); +#50051 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#50052 = VECTOR('',#50053,1.); +#50053 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50054 = ORIENTED_EDGE('',*,*,#49933,.F.); +#50055 = PLANE('',#50056); +#50056 = AXIS2_PLACEMENT_3D('',#50057,#50058,#50059); +#50057 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#50058 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50059 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50060 = ADVANCED_FACE('',(#50061),#50072,.T.); +#50061 = FACE_BOUND('',#50062,.T.); +#50062 = EDGE_LOOP('',(#50063,#50064,#50065,#50066)); +#50063 = ORIENTED_EDGE('',*,*,#47791,.T.); +#50064 = ORIENTED_EDGE('',*,*,#47654,.T.); +#50065 = ORIENTED_EDGE('',*,*,#47679,.T.); +#50066 = ORIENTED_EDGE('',*,*,#50067,.T.); +#50067 = EDGE_CURVE('',#47680,#47784,#50068,.T.); +#50068 = LINE('',#50069,#50070); +#50069 = CARTESIAN_POINT('',(0.1,-12.,0.9)); +#50070 = VECTOR('',#50071,1.); +#50071 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50072 = PLANE('',#50073); +#50073 = AXIS2_PLACEMENT_3D('',#50074,#50075,#50076); +#50074 = CARTESIAN_POINT('',(-1.304512053935E-15,-12.,0.9)); +#50075 = DIRECTION('',(0.,0.,1.)); +#50076 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50077 = ADVANCED_FACE('',(#50078),#50089,.T.); +#50078 = FACE_BOUND('',#50079,.T.); +#50079 = EDGE_LOOP('',(#50080,#50081,#50087,#50088)); +#50080 = ORIENTED_EDGE('',*,*,#47759,.T.); +#50081 = ORIENTED_EDGE('',*,*,#50082,.F.); +#50082 = EDGE_CURVE('',#47704,#47760,#50083,.T.); +#50083 = LINE('',#50084,#50085); +#50084 = CARTESIAN_POINT('',(-0.1,-12.,0.9)); +#50085 = VECTOR('',#50086,1.); +#50086 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50087 = ORIENTED_EDGE('',*,*,#47711,.T.); +#50088 = ORIENTED_EDGE('',*,*,#47734,.T.); +#50089 = PLANE('',#50090); +#50090 = AXIS2_PLACEMENT_3D('',#50091,#50092,#50093); +#50091 = CARTESIAN_POINT('',(-1.304512053935E-15,-12.,0.9)); +#50092 = DIRECTION('',(0.,0.,1.)); +#50093 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50094 = ADVANCED_FACE('',(#50095),#50138,.T.); +#50095 = FACE_BOUND('',#50096,.T.); +#50096 = EDGE_LOOP('',(#50097,#50098,#50106,#50114,#50122,#50130,#50136, + #50137)); +#50097 = ORIENTED_EDGE('',*,*,#47767,.F.); +#50098 = ORIENTED_EDGE('',*,*,#50099,.T.); +#50099 = EDGE_CURVE('',#47768,#50100,#50102,.T.); +#50100 = VERTEX_POINT('',#50101); +#50101 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#50102 = LINE('',#50103,#50104); +#50103 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#50104 = VECTOR('',#50105,1.); +#50105 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50106 = ORIENTED_EDGE('',*,*,#50107,.T.); +#50107 = EDGE_CURVE('',#50100,#50108,#50110,.T.); +#50108 = VERTEX_POINT('',#50109); +#50109 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#50110 = LINE('',#50111,#50112); +#50111 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#50112 = VECTOR('',#50113,1.); +#50113 = DIRECTION('',(0.,0.,-1.)); +#50114 = ORIENTED_EDGE('',*,*,#50115,.T.); +#50115 = EDGE_CURVE('',#50108,#50116,#50118,.T.); +#50116 = VERTEX_POINT('',#50117); +#50117 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#50118 = LINE('',#50119,#50120); +#50119 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#50120 = VECTOR('',#50121,1.); +#50121 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50122 = ORIENTED_EDGE('',*,*,#50123,.T.); +#50123 = EDGE_CURVE('',#50116,#50124,#50126,.T.); +#50124 = VERTEX_POINT('',#50125); +#50125 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50126 = LINE('',#50127,#50128); +#50127 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#50128 = VECTOR('',#50129,1.); +#50129 = DIRECTION('',(0.,0.,1.)); +#50130 = ORIENTED_EDGE('',*,*,#50131,.T.); +#50131 = EDGE_CURVE('',#50124,#47696,#50132,.T.); +#50132 = LINE('',#50133,#50134); +#50133 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50134 = VECTOR('',#50135,1.); +#50135 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50136 = ORIENTED_EDGE('',*,*,#47703,.F.); +#50137 = ORIENTED_EDGE('',*,*,#50082,.T.); +#50138 = PLANE('',#50139); +#50139 = AXIS2_PLACEMENT_3D('',#50140,#50141,#50142); +#50140 = CARTESIAN_POINT('',(-0.1,-12.,2.448597401424)); +#50141 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50142 = DIRECTION('',(0.,0.,1.)); +#50143 = ADVANCED_FACE('',(#50144),#50162,.T.); +#50144 = FACE_BOUND('',#50145,.T.); +#50145 = EDGE_LOOP('',(#50146,#50154,#50160,#50161)); +#50146 = ORIENTED_EDGE('',*,*,#50147,.T.); +#50147 = EDGE_CURVE('',#50124,#50148,#50150,.T.); +#50148 = VERTEX_POINT('',#50149); +#50149 = CARTESIAN_POINT('',(0.1,-11.75,4.45)); +#50150 = LINE('',#50151,#50152); +#50151 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50152 = VECTOR('',#50153,1.); +#50153 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50154 = ORIENTED_EDGE('',*,*,#50155,.T.); +#50155 = EDGE_CURVE('',#50148,#47688,#50156,.T.); +#50156 = LINE('',#50157,#50158); +#50157 = CARTESIAN_POINT('',(0.1,-11.75,4.45)); +#50158 = VECTOR('',#50159,1.); +#50159 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50160 = ORIENTED_EDGE('',*,*,#47695,.F.); +#50161 = ORIENTED_EDGE('',*,*,#50131,.F.); +#50162 = PLANE('',#50163); +#50163 = AXIS2_PLACEMENT_3D('',#50164,#50165,#50166); +#50164 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#50165 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50166 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50167 = ADVANCED_FACE('',(#50168),#50204,.F.); +#50168 = FACE_BOUND('',#50169,.F.); +#50169 = EDGE_LOOP('',(#50170,#50171,#50179,#50187,#50195,#50201,#50202, + #50203)); +#50170 = ORIENTED_EDGE('',*,*,#47783,.F.); +#50171 = ORIENTED_EDGE('',*,*,#50172,.T.); +#50172 = EDGE_CURVE('',#47776,#50173,#50175,.T.); +#50173 = VERTEX_POINT('',#50174); +#50174 = CARTESIAN_POINT('',(0.1,-12.25,4.45)); +#50175 = LINE('',#50176,#50177); +#50176 = CARTESIAN_POINT('',(0.1,-12.3,4.5)); +#50177 = VECTOR('',#50178,1.); +#50178 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50179 = ORIENTED_EDGE('',*,*,#50180,.T.); +#50180 = EDGE_CURVE('',#50173,#50181,#50183,.T.); +#50181 = VERTEX_POINT('',#50182); +#50182 = CARTESIAN_POINT('',(0.1,-12.25,1.25)); +#50183 = LINE('',#50184,#50185); +#50184 = CARTESIAN_POINT('',(0.1,-12.25,4.45)); +#50185 = VECTOR('',#50186,1.); +#50186 = DIRECTION('',(0.,0.,-1.)); +#50187 = ORIENTED_EDGE('',*,*,#50188,.T.); +#50188 = EDGE_CURVE('',#50181,#50189,#50191,.T.); +#50189 = VERTEX_POINT('',#50190); +#50190 = CARTESIAN_POINT('',(0.1,-11.75,1.25)); +#50191 = LINE('',#50192,#50193); +#50192 = CARTESIAN_POINT('',(0.1,-12.25,1.25)); +#50193 = VECTOR('',#50194,1.); +#50194 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50195 = ORIENTED_EDGE('',*,*,#50196,.T.); +#50196 = EDGE_CURVE('',#50189,#50148,#50197,.T.); +#50197 = LINE('',#50198,#50199); +#50198 = CARTESIAN_POINT('',(0.1,-11.75,1.25)); +#50199 = VECTOR('',#50200,1.); +#50200 = DIRECTION('',(0.,0.,1.)); +#50201 = ORIENTED_EDGE('',*,*,#50155,.T.); +#50202 = ORIENTED_EDGE('',*,*,#47687,.F.); +#50203 = ORIENTED_EDGE('',*,*,#50067,.T.); +#50204 = PLANE('',#50205); +#50205 = AXIS2_PLACEMENT_3D('',#50206,#50207,#50208); +#50206 = CARTESIAN_POINT('',(0.1,-12.,2.448597401424)); +#50207 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50208 = DIRECTION('',(0.,0.,1.)); +#50209 = ADVANCED_FACE('',(#50210),#50221,.T.); +#50210 = FACE_BOUND('',#50211,.T.); +#50211 = EDGE_LOOP('',(#50212,#50213,#50214,#50220)); +#50212 = ORIENTED_EDGE('',*,*,#47775,.T.); +#50213 = ORIENTED_EDGE('',*,*,#50172,.T.); +#50214 = ORIENTED_EDGE('',*,*,#50215,.F.); +#50215 = EDGE_CURVE('',#50100,#50173,#50216,.T.); +#50216 = LINE('',#50217,#50218); +#50217 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#50218 = VECTOR('',#50219,1.); +#50219 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50220 = ORIENTED_EDGE('',*,*,#50099,.F.); +#50221 = PLANE('',#50222); +#50222 = AXIS2_PLACEMENT_3D('',#50223,#50224,#50225); +#50223 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#50224 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50225 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50226 = ADVANCED_FACE('',(#50227),#50238,.T.); +#50227 = FACE_BOUND('',#50228,.T.); +#50228 = EDGE_LOOP('',(#50229,#50230,#50231,#50232)); +#50229 = ORIENTED_EDGE('',*,*,#47951,.T.); +#50230 = ORIENTED_EDGE('',*,*,#47814,.T.); +#50231 = ORIENTED_EDGE('',*,*,#47839,.T.); +#50232 = ORIENTED_EDGE('',*,*,#50233,.T.); +#50233 = EDGE_CURVE('',#47840,#47944,#50234,.T.); +#50234 = LINE('',#50235,#50236); +#50235 = CARTESIAN_POINT('',(0.1,-10.,0.9)); +#50236 = VECTOR('',#50237,1.); +#50237 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50238 = PLANE('',#50239); +#50239 = AXIS2_PLACEMENT_3D('',#50240,#50241,#50242); +#50240 = CARTESIAN_POINT('',(-1.08246744901E-15,-10.,0.9)); +#50241 = DIRECTION('',(0.,0.,1.)); +#50242 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50243 = ADVANCED_FACE('',(#50244),#50255,.T.); +#50244 = FACE_BOUND('',#50245,.T.); +#50245 = EDGE_LOOP('',(#50246,#50247,#50253,#50254)); +#50246 = ORIENTED_EDGE('',*,*,#47919,.T.); +#50247 = ORIENTED_EDGE('',*,*,#50248,.F.); +#50248 = EDGE_CURVE('',#47864,#47920,#50249,.T.); +#50249 = LINE('',#50250,#50251); +#50250 = CARTESIAN_POINT('',(-0.1,-10.,0.9)); +#50251 = VECTOR('',#50252,1.); +#50252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50253 = ORIENTED_EDGE('',*,*,#47871,.T.); +#50254 = ORIENTED_EDGE('',*,*,#47894,.T.); +#50255 = PLANE('',#50256); +#50256 = AXIS2_PLACEMENT_3D('',#50257,#50258,#50259); +#50257 = CARTESIAN_POINT('',(-1.08246744901E-15,-10.,0.9)); +#50258 = DIRECTION('',(0.,0.,1.)); +#50259 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50260 = ADVANCED_FACE('',(#50261),#50304,.T.); +#50261 = FACE_BOUND('',#50262,.T.); +#50262 = EDGE_LOOP('',(#50263,#50264,#50272,#50280,#50288,#50296,#50302, + #50303)); +#50263 = ORIENTED_EDGE('',*,*,#47927,.F.); +#50264 = ORIENTED_EDGE('',*,*,#50265,.T.); +#50265 = EDGE_CURVE('',#47928,#50266,#50268,.T.); +#50266 = VERTEX_POINT('',#50267); +#50267 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#50268 = LINE('',#50269,#50270); +#50269 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#50270 = VECTOR('',#50271,1.); +#50271 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50272 = ORIENTED_EDGE('',*,*,#50273,.T.); +#50273 = EDGE_CURVE('',#50266,#50274,#50276,.T.); +#50274 = VERTEX_POINT('',#50275); +#50275 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#50276 = LINE('',#50277,#50278); +#50277 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#50278 = VECTOR('',#50279,1.); +#50279 = DIRECTION('',(0.,0.,-1.)); +#50280 = ORIENTED_EDGE('',*,*,#50281,.T.); +#50281 = EDGE_CURVE('',#50274,#50282,#50284,.T.); +#50282 = VERTEX_POINT('',#50283); +#50283 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#50284 = LINE('',#50285,#50286); +#50285 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#50286 = VECTOR('',#50287,1.); +#50287 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50288 = ORIENTED_EDGE('',*,*,#50289,.T.); +#50289 = EDGE_CURVE('',#50282,#50290,#50292,.T.); +#50290 = VERTEX_POINT('',#50291); +#50291 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50292 = LINE('',#50293,#50294); +#50293 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#50294 = VECTOR('',#50295,1.); +#50295 = DIRECTION('',(0.,0.,1.)); +#50296 = ORIENTED_EDGE('',*,*,#50297,.T.); +#50297 = EDGE_CURVE('',#50290,#47856,#50298,.T.); +#50298 = LINE('',#50299,#50300); +#50299 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50300 = VECTOR('',#50301,1.); +#50301 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50302 = ORIENTED_EDGE('',*,*,#47863,.F.); +#50303 = ORIENTED_EDGE('',*,*,#50248,.T.); +#50304 = PLANE('',#50305); +#50305 = AXIS2_PLACEMENT_3D('',#50306,#50307,#50308); +#50306 = CARTESIAN_POINT('',(-0.1,-10.,2.448597401424)); +#50307 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50308 = DIRECTION('',(0.,0.,1.)); +#50309 = ADVANCED_FACE('',(#50310),#50328,.T.); +#50310 = FACE_BOUND('',#50311,.T.); +#50311 = EDGE_LOOP('',(#50312,#50320,#50326,#50327)); +#50312 = ORIENTED_EDGE('',*,*,#50313,.T.); +#50313 = EDGE_CURVE('',#50290,#50314,#50316,.T.); +#50314 = VERTEX_POINT('',#50315); +#50315 = CARTESIAN_POINT('',(0.1,-9.75,4.45)); +#50316 = LINE('',#50317,#50318); +#50317 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50318 = VECTOR('',#50319,1.); +#50319 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50320 = ORIENTED_EDGE('',*,*,#50321,.T.); +#50321 = EDGE_CURVE('',#50314,#47848,#50322,.T.); +#50322 = LINE('',#50323,#50324); +#50323 = CARTESIAN_POINT('',(0.1,-9.75,4.45)); +#50324 = VECTOR('',#50325,1.); +#50325 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50326 = ORIENTED_EDGE('',*,*,#47855,.F.); +#50327 = ORIENTED_EDGE('',*,*,#50297,.F.); +#50328 = PLANE('',#50329); +#50329 = AXIS2_PLACEMENT_3D('',#50330,#50331,#50332); +#50330 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#50331 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50332 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50333 = ADVANCED_FACE('',(#50334),#50370,.F.); +#50334 = FACE_BOUND('',#50335,.F.); +#50335 = EDGE_LOOP('',(#50336,#50337,#50345,#50353,#50361,#50367,#50368, + #50369)); +#50336 = ORIENTED_EDGE('',*,*,#47943,.F.); +#50337 = ORIENTED_EDGE('',*,*,#50338,.T.); +#50338 = EDGE_CURVE('',#47936,#50339,#50341,.T.); +#50339 = VERTEX_POINT('',#50340); +#50340 = CARTESIAN_POINT('',(0.1,-10.25,4.45)); +#50341 = LINE('',#50342,#50343); +#50342 = CARTESIAN_POINT('',(0.1,-10.3,4.5)); +#50343 = VECTOR('',#50344,1.); +#50344 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50345 = ORIENTED_EDGE('',*,*,#50346,.T.); +#50346 = EDGE_CURVE('',#50339,#50347,#50349,.T.); +#50347 = VERTEX_POINT('',#50348); +#50348 = CARTESIAN_POINT('',(0.1,-10.25,1.25)); +#50349 = LINE('',#50350,#50351); +#50350 = CARTESIAN_POINT('',(0.1,-10.25,4.45)); +#50351 = VECTOR('',#50352,1.); +#50352 = DIRECTION('',(0.,0.,-1.)); +#50353 = ORIENTED_EDGE('',*,*,#50354,.T.); +#50354 = EDGE_CURVE('',#50347,#50355,#50357,.T.); +#50355 = VERTEX_POINT('',#50356); +#50356 = CARTESIAN_POINT('',(0.1,-9.75,1.25)); +#50357 = LINE('',#50358,#50359); +#50358 = CARTESIAN_POINT('',(0.1,-10.25,1.25)); +#50359 = VECTOR('',#50360,1.); +#50360 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50361 = ORIENTED_EDGE('',*,*,#50362,.T.); +#50362 = EDGE_CURVE('',#50355,#50314,#50363,.T.); +#50363 = LINE('',#50364,#50365); +#50364 = CARTESIAN_POINT('',(0.1,-9.75,1.25)); +#50365 = VECTOR('',#50366,1.); +#50366 = DIRECTION('',(0.,0.,1.)); +#50367 = ORIENTED_EDGE('',*,*,#50321,.T.); +#50368 = ORIENTED_EDGE('',*,*,#47847,.F.); +#50369 = ORIENTED_EDGE('',*,*,#50233,.T.); +#50370 = PLANE('',#50371); +#50371 = AXIS2_PLACEMENT_3D('',#50372,#50373,#50374); +#50372 = CARTESIAN_POINT('',(0.1,-10.,2.448597401424)); +#50373 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50374 = DIRECTION('',(0.,0.,1.)); +#50375 = ADVANCED_FACE('',(#50376),#50387,.T.); +#50376 = FACE_BOUND('',#50377,.T.); +#50377 = EDGE_LOOP('',(#50378,#50379,#50380,#50386)); +#50378 = ORIENTED_EDGE('',*,*,#47935,.T.); +#50379 = ORIENTED_EDGE('',*,*,#50338,.T.); +#50380 = ORIENTED_EDGE('',*,*,#50381,.F.); +#50381 = EDGE_CURVE('',#50266,#50339,#50382,.T.); +#50382 = LINE('',#50383,#50384); +#50383 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#50384 = VECTOR('',#50385,1.); +#50385 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50386 = ORIENTED_EDGE('',*,*,#50265,.F.); +#50387 = PLANE('',#50388); +#50388 = AXIS2_PLACEMENT_3D('',#50389,#50390,#50391); +#50389 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#50390 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50391 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50392 = ADVANCED_FACE('',(#50393),#50404,.T.); +#50393 = FACE_BOUND('',#50394,.T.); +#50394 = EDGE_LOOP('',(#50395,#50396,#50397,#50398)); +#50395 = ORIENTED_EDGE('',*,*,#48111,.T.); +#50396 = ORIENTED_EDGE('',*,*,#47974,.T.); +#50397 = ORIENTED_EDGE('',*,*,#47999,.T.); +#50398 = ORIENTED_EDGE('',*,*,#50399,.T.); +#50399 = EDGE_CURVE('',#48000,#48104,#50400,.T.); +#50400 = LINE('',#50401,#50402); +#50401 = CARTESIAN_POINT('',(0.1,-8.,0.9)); +#50402 = VECTOR('',#50403,1.); +#50403 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50404 = PLANE('',#50405); +#50405 = AXIS2_PLACEMENT_3D('',#50406,#50407,#50408); +#50406 = CARTESIAN_POINT('',(-8.604228440845E-16,-8.,0.9)); +#50407 = DIRECTION('',(0.,0.,1.)); +#50408 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50409 = ADVANCED_FACE('',(#50410),#50421,.T.); +#50410 = FACE_BOUND('',#50411,.T.); +#50411 = EDGE_LOOP('',(#50412,#50413,#50419,#50420)); +#50412 = ORIENTED_EDGE('',*,*,#48079,.T.); +#50413 = ORIENTED_EDGE('',*,*,#50414,.F.); +#50414 = EDGE_CURVE('',#48024,#48080,#50415,.T.); +#50415 = LINE('',#50416,#50417); +#50416 = CARTESIAN_POINT('',(-0.1,-8.,0.9)); +#50417 = VECTOR('',#50418,1.); +#50418 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50419 = ORIENTED_EDGE('',*,*,#48031,.T.); +#50420 = ORIENTED_EDGE('',*,*,#48054,.T.); +#50421 = PLANE('',#50422); +#50422 = AXIS2_PLACEMENT_3D('',#50423,#50424,#50425); +#50423 = CARTESIAN_POINT('',(-8.604228440845E-16,-8.,0.9)); +#50424 = DIRECTION('',(0.,0.,1.)); +#50425 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50426 = ADVANCED_FACE('',(#50427),#50470,.T.); +#50427 = FACE_BOUND('',#50428,.T.); +#50428 = EDGE_LOOP('',(#50429,#50430,#50438,#50446,#50454,#50462,#50468, + #50469)); +#50429 = ORIENTED_EDGE('',*,*,#48087,.F.); +#50430 = ORIENTED_EDGE('',*,*,#50431,.T.); +#50431 = EDGE_CURVE('',#48088,#50432,#50434,.T.); +#50432 = VERTEX_POINT('',#50433); +#50433 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#50434 = LINE('',#50435,#50436); +#50435 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#50436 = VECTOR('',#50437,1.); +#50437 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50438 = ORIENTED_EDGE('',*,*,#50439,.T.); +#50439 = EDGE_CURVE('',#50432,#50440,#50442,.T.); +#50440 = VERTEX_POINT('',#50441); +#50441 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#50442 = LINE('',#50443,#50444); +#50443 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#50444 = VECTOR('',#50445,1.); +#50445 = DIRECTION('',(0.,0.,-1.)); +#50446 = ORIENTED_EDGE('',*,*,#50447,.T.); +#50447 = EDGE_CURVE('',#50440,#50448,#50450,.T.); +#50448 = VERTEX_POINT('',#50449); +#50449 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#50450 = LINE('',#50451,#50452); +#50451 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#50452 = VECTOR('',#50453,1.); +#50453 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50454 = ORIENTED_EDGE('',*,*,#50455,.T.); +#50455 = EDGE_CURVE('',#50448,#50456,#50458,.T.); +#50456 = VERTEX_POINT('',#50457); +#50457 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50458 = LINE('',#50459,#50460); +#50459 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#50460 = VECTOR('',#50461,1.); +#50461 = DIRECTION('',(0.,0.,1.)); +#50462 = ORIENTED_EDGE('',*,*,#50463,.T.); +#50463 = EDGE_CURVE('',#50456,#48016,#50464,.T.); +#50464 = LINE('',#50465,#50466); +#50465 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50466 = VECTOR('',#50467,1.); +#50467 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50468 = ORIENTED_EDGE('',*,*,#48023,.F.); +#50469 = ORIENTED_EDGE('',*,*,#50414,.T.); +#50470 = PLANE('',#50471); +#50471 = AXIS2_PLACEMENT_3D('',#50472,#50473,#50474); +#50472 = CARTESIAN_POINT('',(-0.1,-8.,2.448597401424)); +#50473 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50474 = DIRECTION('',(0.,0.,1.)); +#50475 = ADVANCED_FACE('',(#50476),#50494,.T.); +#50476 = FACE_BOUND('',#50477,.T.); +#50477 = EDGE_LOOP('',(#50478,#50486,#50492,#50493)); +#50478 = ORIENTED_EDGE('',*,*,#50479,.T.); +#50479 = EDGE_CURVE('',#50456,#50480,#50482,.T.); +#50480 = VERTEX_POINT('',#50481); +#50481 = CARTESIAN_POINT('',(0.1,-7.75,4.45)); +#50482 = LINE('',#50483,#50484); +#50483 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50484 = VECTOR('',#50485,1.); +#50485 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50486 = ORIENTED_EDGE('',*,*,#50487,.T.); +#50487 = EDGE_CURVE('',#50480,#48008,#50488,.T.); +#50488 = LINE('',#50489,#50490); +#50489 = CARTESIAN_POINT('',(0.1,-7.75,4.45)); +#50490 = VECTOR('',#50491,1.); +#50491 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50492 = ORIENTED_EDGE('',*,*,#48015,.F.); +#50493 = ORIENTED_EDGE('',*,*,#50463,.F.); +#50494 = PLANE('',#50495); +#50495 = AXIS2_PLACEMENT_3D('',#50496,#50497,#50498); +#50496 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#50497 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50498 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50499 = ADVANCED_FACE('',(#50500),#50536,.F.); +#50500 = FACE_BOUND('',#50501,.F.); +#50501 = EDGE_LOOP('',(#50502,#50503,#50511,#50519,#50527,#50533,#50534, + #50535)); +#50502 = ORIENTED_EDGE('',*,*,#48103,.F.); +#50503 = ORIENTED_EDGE('',*,*,#50504,.T.); +#50504 = EDGE_CURVE('',#48096,#50505,#50507,.T.); +#50505 = VERTEX_POINT('',#50506); +#50506 = CARTESIAN_POINT('',(0.1,-8.25,4.45)); +#50507 = LINE('',#50508,#50509); +#50508 = CARTESIAN_POINT('',(0.1,-8.3,4.5)); +#50509 = VECTOR('',#50510,1.); +#50510 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50511 = ORIENTED_EDGE('',*,*,#50512,.T.); +#50512 = EDGE_CURVE('',#50505,#50513,#50515,.T.); +#50513 = VERTEX_POINT('',#50514); +#50514 = CARTESIAN_POINT('',(0.1,-8.25,1.25)); +#50515 = LINE('',#50516,#50517); +#50516 = CARTESIAN_POINT('',(0.1,-8.25,4.45)); +#50517 = VECTOR('',#50518,1.); +#50518 = DIRECTION('',(0.,0.,-1.)); +#50519 = ORIENTED_EDGE('',*,*,#50520,.T.); +#50520 = EDGE_CURVE('',#50513,#50521,#50523,.T.); +#50521 = VERTEX_POINT('',#50522); +#50522 = CARTESIAN_POINT('',(0.1,-7.75,1.25)); +#50523 = LINE('',#50524,#50525); +#50524 = CARTESIAN_POINT('',(0.1,-8.25,1.25)); +#50525 = VECTOR('',#50526,1.); +#50526 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50527 = ORIENTED_EDGE('',*,*,#50528,.T.); +#50528 = EDGE_CURVE('',#50521,#50480,#50529,.T.); +#50529 = LINE('',#50530,#50531); +#50530 = CARTESIAN_POINT('',(0.1,-7.75,1.25)); +#50531 = VECTOR('',#50532,1.); +#50532 = DIRECTION('',(0.,0.,1.)); +#50533 = ORIENTED_EDGE('',*,*,#50487,.T.); +#50534 = ORIENTED_EDGE('',*,*,#48007,.F.); +#50535 = ORIENTED_EDGE('',*,*,#50399,.T.); +#50536 = PLANE('',#50537); +#50537 = AXIS2_PLACEMENT_3D('',#50538,#50539,#50540); +#50538 = CARTESIAN_POINT('',(0.1,-8.,2.448597401424)); +#50539 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50540 = DIRECTION('',(0.,0.,1.)); +#50541 = ADVANCED_FACE('',(#50542),#50553,.T.); +#50542 = FACE_BOUND('',#50543,.T.); +#50543 = EDGE_LOOP('',(#50544,#50545,#50546,#50552)); +#50544 = ORIENTED_EDGE('',*,*,#48095,.T.); +#50545 = ORIENTED_EDGE('',*,*,#50504,.T.); +#50546 = ORIENTED_EDGE('',*,*,#50547,.F.); +#50547 = EDGE_CURVE('',#50432,#50505,#50548,.T.); +#50548 = LINE('',#50549,#50550); +#50549 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#50550 = VECTOR('',#50551,1.); +#50551 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50552 = ORIENTED_EDGE('',*,*,#50431,.F.); +#50553 = PLANE('',#50554); +#50554 = AXIS2_PLACEMENT_3D('',#50555,#50556,#50557); +#50555 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#50556 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50557 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50558 = ADVANCED_FACE('',(#50559),#50570,.T.); +#50559 = FACE_BOUND('',#50560,.T.); +#50560 = EDGE_LOOP('',(#50561,#50562,#50563,#50564)); +#50561 = ORIENTED_EDGE('',*,*,#48271,.T.); +#50562 = ORIENTED_EDGE('',*,*,#48134,.T.); +#50563 = ORIENTED_EDGE('',*,*,#48159,.T.); +#50564 = ORIENTED_EDGE('',*,*,#50565,.T.); +#50565 = EDGE_CURVE('',#48160,#48264,#50566,.T.); +#50566 = LINE('',#50567,#50568); +#50567 = CARTESIAN_POINT('',(0.1,-6.,0.9)); +#50568 = VECTOR('',#50569,1.); +#50569 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50570 = PLANE('',#50571); +#50571 = AXIS2_PLACEMENT_3D('',#50572,#50573,#50574); +#50572 = CARTESIAN_POINT('',(-6.383782391595E-16,-6.,0.9)); +#50573 = DIRECTION('',(0.,0.,1.)); +#50574 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50575 = ADVANCED_FACE('',(#50576),#50587,.T.); +#50576 = FACE_BOUND('',#50577,.T.); +#50577 = EDGE_LOOP('',(#50578,#50579,#50585,#50586)); +#50578 = ORIENTED_EDGE('',*,*,#48239,.T.); +#50579 = ORIENTED_EDGE('',*,*,#50580,.F.); +#50580 = EDGE_CURVE('',#48184,#48240,#50581,.T.); +#50581 = LINE('',#50582,#50583); +#50582 = CARTESIAN_POINT('',(-0.1,-6.,0.9)); +#50583 = VECTOR('',#50584,1.); +#50584 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50585 = ORIENTED_EDGE('',*,*,#48191,.T.); +#50586 = ORIENTED_EDGE('',*,*,#48214,.T.); +#50587 = PLANE('',#50588); +#50588 = AXIS2_PLACEMENT_3D('',#50589,#50590,#50591); +#50589 = CARTESIAN_POINT('',(-6.383782391595E-16,-6.,0.9)); +#50590 = DIRECTION('',(0.,0.,1.)); +#50591 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50592 = ADVANCED_FACE('',(#50593),#50636,.T.); +#50593 = FACE_BOUND('',#50594,.T.); +#50594 = EDGE_LOOP('',(#50595,#50596,#50604,#50612,#50620,#50628,#50634, + #50635)); +#50595 = ORIENTED_EDGE('',*,*,#48247,.F.); +#50596 = ORIENTED_EDGE('',*,*,#50597,.T.); +#50597 = EDGE_CURVE('',#48248,#50598,#50600,.T.); +#50598 = VERTEX_POINT('',#50599); +#50599 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#50600 = LINE('',#50601,#50602); +#50601 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#50602 = VECTOR('',#50603,1.); +#50603 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50604 = ORIENTED_EDGE('',*,*,#50605,.T.); +#50605 = EDGE_CURVE('',#50598,#50606,#50608,.T.); +#50606 = VERTEX_POINT('',#50607); +#50607 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#50608 = LINE('',#50609,#50610); +#50609 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#50610 = VECTOR('',#50611,1.); +#50611 = DIRECTION('',(0.,0.,-1.)); +#50612 = ORIENTED_EDGE('',*,*,#50613,.T.); +#50613 = EDGE_CURVE('',#50606,#50614,#50616,.T.); +#50614 = VERTEX_POINT('',#50615); +#50615 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#50616 = LINE('',#50617,#50618); +#50617 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#50618 = VECTOR('',#50619,1.); +#50619 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50620 = ORIENTED_EDGE('',*,*,#50621,.T.); +#50621 = EDGE_CURVE('',#50614,#50622,#50624,.T.); +#50622 = VERTEX_POINT('',#50623); +#50623 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50624 = LINE('',#50625,#50626); +#50625 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#50626 = VECTOR('',#50627,1.); +#50627 = DIRECTION('',(0.,0.,1.)); +#50628 = ORIENTED_EDGE('',*,*,#50629,.T.); +#50629 = EDGE_CURVE('',#50622,#48176,#50630,.T.); +#50630 = LINE('',#50631,#50632); +#50631 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50632 = VECTOR('',#50633,1.); +#50633 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50634 = ORIENTED_EDGE('',*,*,#48183,.F.); +#50635 = ORIENTED_EDGE('',*,*,#50580,.T.); +#50636 = PLANE('',#50637); +#50637 = AXIS2_PLACEMENT_3D('',#50638,#50639,#50640); +#50638 = CARTESIAN_POINT('',(-0.1,-6.,2.448597401424)); +#50639 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50640 = DIRECTION('',(0.,0.,1.)); +#50641 = ADVANCED_FACE('',(#50642),#50660,.T.); +#50642 = FACE_BOUND('',#50643,.T.); +#50643 = EDGE_LOOP('',(#50644,#50652,#50658,#50659)); +#50644 = ORIENTED_EDGE('',*,*,#50645,.T.); +#50645 = EDGE_CURVE('',#50622,#50646,#50648,.T.); +#50646 = VERTEX_POINT('',#50647); +#50647 = CARTESIAN_POINT('',(0.1,-5.75,4.45)); +#50648 = LINE('',#50649,#50650); +#50649 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50650 = VECTOR('',#50651,1.); +#50651 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50652 = ORIENTED_EDGE('',*,*,#50653,.T.); +#50653 = EDGE_CURVE('',#50646,#48168,#50654,.T.); +#50654 = LINE('',#50655,#50656); +#50655 = CARTESIAN_POINT('',(0.1,-5.75,4.45)); +#50656 = VECTOR('',#50657,1.); +#50657 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50658 = ORIENTED_EDGE('',*,*,#48175,.F.); +#50659 = ORIENTED_EDGE('',*,*,#50629,.F.); +#50660 = PLANE('',#50661); +#50661 = AXIS2_PLACEMENT_3D('',#50662,#50663,#50664); +#50662 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#50663 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50664 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50665 = ADVANCED_FACE('',(#50666),#50702,.F.); +#50666 = FACE_BOUND('',#50667,.F.); +#50667 = EDGE_LOOP('',(#50668,#50669,#50677,#50685,#50693,#50699,#50700, + #50701)); +#50668 = ORIENTED_EDGE('',*,*,#48263,.F.); +#50669 = ORIENTED_EDGE('',*,*,#50670,.T.); +#50670 = EDGE_CURVE('',#48256,#50671,#50673,.T.); +#50671 = VERTEX_POINT('',#50672); +#50672 = CARTESIAN_POINT('',(0.1,-6.25,4.45)); +#50673 = LINE('',#50674,#50675); +#50674 = CARTESIAN_POINT('',(0.1,-6.3,4.5)); +#50675 = VECTOR('',#50676,1.); +#50676 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50677 = ORIENTED_EDGE('',*,*,#50678,.T.); +#50678 = EDGE_CURVE('',#50671,#50679,#50681,.T.); +#50679 = VERTEX_POINT('',#50680); +#50680 = CARTESIAN_POINT('',(0.1,-6.25,1.25)); +#50681 = LINE('',#50682,#50683); +#50682 = CARTESIAN_POINT('',(0.1,-6.25,4.45)); +#50683 = VECTOR('',#50684,1.); +#50684 = DIRECTION('',(0.,0.,-1.)); +#50685 = ORIENTED_EDGE('',*,*,#50686,.T.); +#50686 = EDGE_CURVE('',#50679,#50687,#50689,.T.); +#50687 = VERTEX_POINT('',#50688); +#50688 = CARTESIAN_POINT('',(0.1,-5.75,1.25)); +#50689 = LINE('',#50690,#50691); +#50690 = CARTESIAN_POINT('',(0.1,-6.25,1.25)); +#50691 = VECTOR('',#50692,1.); +#50692 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50693 = ORIENTED_EDGE('',*,*,#50694,.T.); +#50694 = EDGE_CURVE('',#50687,#50646,#50695,.T.); +#50695 = LINE('',#50696,#50697); +#50696 = CARTESIAN_POINT('',(0.1,-5.75,1.25)); +#50697 = VECTOR('',#50698,1.); +#50698 = DIRECTION('',(0.,0.,1.)); +#50699 = ORIENTED_EDGE('',*,*,#50653,.T.); +#50700 = ORIENTED_EDGE('',*,*,#48167,.F.); +#50701 = ORIENTED_EDGE('',*,*,#50565,.T.); +#50702 = PLANE('',#50703); +#50703 = AXIS2_PLACEMENT_3D('',#50704,#50705,#50706); +#50704 = CARTESIAN_POINT('',(0.1,-6.,2.448597401424)); +#50705 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50706 = DIRECTION('',(0.,0.,1.)); +#50707 = ADVANCED_FACE('',(#50708),#50719,.T.); +#50708 = FACE_BOUND('',#50709,.T.); +#50709 = EDGE_LOOP('',(#50710,#50711,#50712,#50718)); +#50710 = ORIENTED_EDGE('',*,*,#48255,.T.); +#50711 = ORIENTED_EDGE('',*,*,#50670,.T.); +#50712 = ORIENTED_EDGE('',*,*,#50713,.F.); +#50713 = EDGE_CURVE('',#50598,#50671,#50714,.T.); +#50714 = LINE('',#50715,#50716); +#50715 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#50716 = VECTOR('',#50717,1.); +#50717 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50718 = ORIENTED_EDGE('',*,*,#50597,.F.); +#50719 = PLANE('',#50720); +#50720 = AXIS2_PLACEMENT_3D('',#50721,#50722,#50723); +#50721 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#50722 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50723 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50724 = ADVANCED_FACE('',(#50725),#50736,.T.); +#50725 = FACE_BOUND('',#50726,.T.); +#50726 = EDGE_LOOP('',(#50727,#50728,#50729,#50730)); +#50727 = ORIENTED_EDGE('',*,*,#48431,.T.); +#50728 = ORIENTED_EDGE('',*,*,#48294,.T.); +#50729 = ORIENTED_EDGE('',*,*,#48319,.T.); +#50730 = ORIENTED_EDGE('',*,*,#50731,.T.); +#50731 = EDGE_CURVE('',#48320,#48424,#50732,.T.); +#50732 = LINE('',#50733,#50734); +#50733 = CARTESIAN_POINT('',(0.1,-4.,0.9)); +#50734 = VECTOR('',#50735,1.); +#50735 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50736 = PLANE('',#50737); +#50737 = AXIS2_PLACEMENT_3D('',#50738,#50739,#50740); +#50738 = CARTESIAN_POINT('',(-4.163336342344E-16,-4.,0.9)); +#50739 = DIRECTION('',(0.,0.,1.)); +#50740 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50741 = ADVANCED_FACE('',(#50742),#50753,.T.); +#50742 = FACE_BOUND('',#50743,.T.); +#50743 = EDGE_LOOP('',(#50744,#50745,#50751,#50752)); +#50744 = ORIENTED_EDGE('',*,*,#48399,.T.); +#50745 = ORIENTED_EDGE('',*,*,#50746,.F.); +#50746 = EDGE_CURVE('',#48344,#48400,#50747,.T.); +#50747 = LINE('',#50748,#50749); +#50748 = CARTESIAN_POINT('',(-0.1,-4.,0.9)); +#50749 = VECTOR('',#50750,1.); +#50750 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50751 = ORIENTED_EDGE('',*,*,#48351,.T.); +#50752 = ORIENTED_EDGE('',*,*,#48374,.T.); +#50753 = PLANE('',#50754); +#50754 = AXIS2_PLACEMENT_3D('',#50755,#50756,#50757); +#50755 = CARTESIAN_POINT('',(-4.163336342344E-16,-4.,0.9)); +#50756 = DIRECTION('',(0.,0.,1.)); +#50757 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50758 = ADVANCED_FACE('',(#50759),#50802,.T.); +#50759 = FACE_BOUND('',#50760,.T.); +#50760 = EDGE_LOOP('',(#50761,#50762,#50770,#50778,#50786,#50794,#50800, + #50801)); +#50761 = ORIENTED_EDGE('',*,*,#48407,.F.); +#50762 = ORIENTED_EDGE('',*,*,#50763,.T.); +#50763 = EDGE_CURVE('',#48408,#50764,#50766,.T.); +#50764 = VERTEX_POINT('',#50765); +#50765 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#50766 = LINE('',#50767,#50768); +#50767 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#50768 = VECTOR('',#50769,1.); +#50769 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50770 = ORIENTED_EDGE('',*,*,#50771,.T.); +#50771 = EDGE_CURVE('',#50764,#50772,#50774,.T.); +#50772 = VERTEX_POINT('',#50773); +#50773 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#50774 = LINE('',#50775,#50776); +#50775 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#50776 = VECTOR('',#50777,1.); +#50777 = DIRECTION('',(0.,0.,-1.)); +#50778 = ORIENTED_EDGE('',*,*,#50779,.T.); +#50779 = EDGE_CURVE('',#50772,#50780,#50782,.T.); +#50780 = VERTEX_POINT('',#50781); +#50781 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#50782 = LINE('',#50783,#50784); +#50783 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#50784 = VECTOR('',#50785,1.); +#50785 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50786 = ORIENTED_EDGE('',*,*,#50787,.T.); +#50787 = EDGE_CURVE('',#50780,#50788,#50790,.T.); +#50788 = VERTEX_POINT('',#50789); +#50789 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50790 = LINE('',#50791,#50792); +#50791 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#50792 = VECTOR('',#50793,1.); +#50793 = DIRECTION('',(0.,0.,1.)); +#50794 = ORIENTED_EDGE('',*,*,#50795,.T.); +#50795 = EDGE_CURVE('',#50788,#48336,#50796,.T.); +#50796 = LINE('',#50797,#50798); +#50797 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50798 = VECTOR('',#50799,1.); +#50799 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50800 = ORIENTED_EDGE('',*,*,#48343,.F.); +#50801 = ORIENTED_EDGE('',*,*,#50746,.T.); +#50802 = PLANE('',#50803); +#50803 = AXIS2_PLACEMENT_3D('',#50804,#50805,#50806); +#50804 = CARTESIAN_POINT('',(-0.1,-4.,2.448597401424)); +#50805 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50806 = DIRECTION('',(0.,0.,1.)); +#50807 = ADVANCED_FACE('',(#50808),#50826,.T.); +#50808 = FACE_BOUND('',#50809,.T.); +#50809 = EDGE_LOOP('',(#50810,#50818,#50824,#50825)); +#50810 = ORIENTED_EDGE('',*,*,#50811,.T.); +#50811 = EDGE_CURVE('',#50788,#50812,#50814,.T.); +#50812 = VERTEX_POINT('',#50813); +#50813 = CARTESIAN_POINT('',(0.1,-3.75,4.45)); +#50814 = LINE('',#50815,#50816); +#50815 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50816 = VECTOR('',#50817,1.); +#50817 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50818 = ORIENTED_EDGE('',*,*,#50819,.T.); +#50819 = EDGE_CURVE('',#50812,#48328,#50820,.T.); +#50820 = LINE('',#50821,#50822); +#50821 = CARTESIAN_POINT('',(0.1,-3.75,4.45)); +#50822 = VECTOR('',#50823,1.); +#50823 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50824 = ORIENTED_EDGE('',*,*,#48335,.F.); +#50825 = ORIENTED_EDGE('',*,*,#50795,.F.); +#50826 = PLANE('',#50827); +#50827 = AXIS2_PLACEMENT_3D('',#50828,#50829,#50830); +#50828 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#50829 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50830 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50831 = ADVANCED_FACE('',(#50832),#50868,.F.); +#50832 = FACE_BOUND('',#50833,.F.); +#50833 = EDGE_LOOP('',(#50834,#50835,#50843,#50851,#50859,#50865,#50866, + #50867)); +#50834 = ORIENTED_EDGE('',*,*,#48423,.F.); +#50835 = ORIENTED_EDGE('',*,*,#50836,.T.); +#50836 = EDGE_CURVE('',#48416,#50837,#50839,.T.); +#50837 = VERTEX_POINT('',#50838); +#50838 = CARTESIAN_POINT('',(0.1,-4.25,4.45)); +#50839 = LINE('',#50840,#50841); +#50840 = CARTESIAN_POINT('',(0.1,-4.3,4.5)); +#50841 = VECTOR('',#50842,1.); +#50842 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50843 = ORIENTED_EDGE('',*,*,#50844,.T.); +#50844 = EDGE_CURVE('',#50837,#50845,#50847,.T.); +#50845 = VERTEX_POINT('',#50846); +#50846 = CARTESIAN_POINT('',(0.1,-4.25,1.25)); +#50847 = LINE('',#50848,#50849); +#50848 = CARTESIAN_POINT('',(0.1,-4.25,4.45)); +#50849 = VECTOR('',#50850,1.); +#50850 = DIRECTION('',(0.,0.,-1.)); +#50851 = ORIENTED_EDGE('',*,*,#50852,.T.); +#50852 = EDGE_CURVE('',#50845,#50853,#50855,.T.); +#50853 = VERTEX_POINT('',#50854); +#50854 = CARTESIAN_POINT('',(0.1,-3.75,1.25)); +#50855 = LINE('',#50856,#50857); +#50856 = CARTESIAN_POINT('',(0.1,-4.25,1.25)); +#50857 = VECTOR('',#50858,1.); +#50858 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50859 = ORIENTED_EDGE('',*,*,#50860,.T.); +#50860 = EDGE_CURVE('',#50853,#50812,#50861,.T.); +#50861 = LINE('',#50862,#50863); +#50862 = CARTESIAN_POINT('',(0.1,-3.75,1.25)); +#50863 = VECTOR('',#50864,1.); +#50864 = DIRECTION('',(0.,0.,1.)); +#50865 = ORIENTED_EDGE('',*,*,#50819,.T.); +#50866 = ORIENTED_EDGE('',*,*,#48327,.F.); +#50867 = ORIENTED_EDGE('',*,*,#50731,.T.); +#50868 = PLANE('',#50869); +#50869 = AXIS2_PLACEMENT_3D('',#50870,#50871,#50872); +#50870 = CARTESIAN_POINT('',(0.1,-4.,2.448597401424)); +#50871 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50872 = DIRECTION('',(0.,0.,1.)); +#50873 = ADVANCED_FACE('',(#50874),#50885,.T.); +#50874 = FACE_BOUND('',#50875,.T.); +#50875 = EDGE_LOOP('',(#50876,#50877,#50878,#50884)); +#50876 = ORIENTED_EDGE('',*,*,#48415,.T.); +#50877 = ORIENTED_EDGE('',*,*,#50836,.T.); +#50878 = ORIENTED_EDGE('',*,*,#50879,.F.); +#50879 = EDGE_CURVE('',#50764,#50837,#50880,.T.); +#50880 = LINE('',#50881,#50882); +#50881 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#50882 = VECTOR('',#50883,1.); +#50883 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50884 = ORIENTED_EDGE('',*,*,#50763,.F.); +#50885 = PLANE('',#50886); +#50886 = AXIS2_PLACEMENT_3D('',#50887,#50888,#50889); +#50887 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#50888 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50889 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50890 = ADVANCED_FACE('',(#50891),#50902,.T.); +#50891 = FACE_BOUND('',#50892,.T.); +#50892 = EDGE_LOOP('',(#50893,#50894,#50895,#50896)); +#50893 = ORIENTED_EDGE('',*,*,#48591,.T.); +#50894 = ORIENTED_EDGE('',*,*,#48454,.T.); +#50895 = ORIENTED_EDGE('',*,*,#48479,.T.); +#50896 = ORIENTED_EDGE('',*,*,#50897,.T.); +#50897 = EDGE_CURVE('',#48480,#48584,#50898,.T.); +#50898 = LINE('',#50899,#50900); +#50899 = CARTESIAN_POINT('',(0.1,-2.,0.9)); +#50900 = VECTOR('',#50901,1.); +#50901 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50902 = PLANE('',#50903); +#50903 = AXIS2_PLACEMENT_3D('',#50904,#50905,#50906); +#50904 = CARTESIAN_POINT('',(-1.942890293094E-16,-2.,0.9)); +#50905 = DIRECTION('',(0.,0.,1.)); +#50906 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50907 = ADVANCED_FACE('',(#50908),#50919,.T.); +#50908 = FACE_BOUND('',#50909,.T.); +#50909 = EDGE_LOOP('',(#50910,#50911,#50917,#50918)); +#50910 = ORIENTED_EDGE('',*,*,#48559,.T.); +#50911 = ORIENTED_EDGE('',*,*,#50912,.F.); +#50912 = EDGE_CURVE('',#48504,#48560,#50913,.T.); +#50913 = LINE('',#50914,#50915); +#50914 = CARTESIAN_POINT('',(-0.1,-2.,0.9)); +#50915 = VECTOR('',#50916,1.); +#50916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#50917 = ORIENTED_EDGE('',*,*,#48511,.T.); +#50918 = ORIENTED_EDGE('',*,*,#48534,.T.); +#50919 = PLANE('',#50920); +#50920 = AXIS2_PLACEMENT_3D('',#50921,#50922,#50923); +#50921 = CARTESIAN_POINT('',(-1.942890293094E-16,-2.,0.9)); +#50922 = DIRECTION('',(0.,0.,1.)); +#50923 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#50924 = ADVANCED_FACE('',(#50925),#50968,.T.); +#50925 = FACE_BOUND('',#50926,.T.); +#50926 = EDGE_LOOP('',(#50927,#50928,#50936,#50944,#50952,#50960,#50966, + #50967)); +#50927 = ORIENTED_EDGE('',*,*,#48567,.F.); +#50928 = ORIENTED_EDGE('',*,*,#50929,.T.); +#50929 = EDGE_CURVE('',#48568,#50930,#50932,.T.); +#50930 = VERTEX_POINT('',#50931); +#50931 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#50932 = LINE('',#50933,#50934); +#50933 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#50934 = VECTOR('',#50935,1.); +#50935 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#50936 = ORIENTED_EDGE('',*,*,#50937,.T.); +#50937 = EDGE_CURVE('',#50930,#50938,#50940,.T.); +#50938 = VERTEX_POINT('',#50939); +#50939 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#50940 = LINE('',#50941,#50942); +#50941 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#50942 = VECTOR('',#50943,1.); +#50943 = DIRECTION('',(0.,0.,-1.)); +#50944 = ORIENTED_EDGE('',*,*,#50945,.T.); +#50945 = EDGE_CURVE('',#50938,#50946,#50948,.T.); +#50946 = VERTEX_POINT('',#50947); +#50947 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#50948 = LINE('',#50949,#50950); +#50949 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#50950 = VECTOR('',#50951,1.); +#50951 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#50952 = ORIENTED_EDGE('',*,*,#50953,.T.); +#50953 = EDGE_CURVE('',#50946,#50954,#50956,.T.); +#50954 = VERTEX_POINT('',#50955); +#50955 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50956 = LINE('',#50957,#50958); +#50957 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#50958 = VECTOR('',#50959,1.); +#50959 = DIRECTION('',(0.,0.,1.)); +#50960 = ORIENTED_EDGE('',*,*,#50961,.T.); +#50961 = EDGE_CURVE('',#50954,#48496,#50962,.T.); +#50962 = LINE('',#50963,#50964); +#50963 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50964 = VECTOR('',#50965,1.); +#50965 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50966 = ORIENTED_EDGE('',*,*,#48503,.F.); +#50967 = ORIENTED_EDGE('',*,*,#50912,.T.); +#50968 = PLANE('',#50969); +#50969 = AXIS2_PLACEMENT_3D('',#50970,#50971,#50972); +#50970 = CARTESIAN_POINT('',(-0.1,-2.,2.448597401424)); +#50971 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#50972 = DIRECTION('',(0.,0.,1.)); +#50973 = ADVANCED_FACE('',(#50974),#50992,.T.); +#50974 = FACE_BOUND('',#50975,.T.); +#50975 = EDGE_LOOP('',(#50976,#50984,#50990,#50991)); +#50976 = ORIENTED_EDGE('',*,*,#50977,.T.); +#50977 = EDGE_CURVE('',#50954,#50978,#50980,.T.); +#50978 = VERTEX_POINT('',#50979); +#50979 = CARTESIAN_POINT('',(0.1,-1.75,4.45)); +#50980 = LINE('',#50981,#50982); +#50981 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50982 = VECTOR('',#50983,1.); +#50983 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#50984 = ORIENTED_EDGE('',*,*,#50985,.T.); +#50985 = EDGE_CURVE('',#50978,#48488,#50986,.T.); +#50986 = LINE('',#50987,#50988); +#50987 = CARTESIAN_POINT('',(0.1,-1.75,4.45)); +#50988 = VECTOR('',#50989,1.); +#50989 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50990 = ORIENTED_EDGE('',*,*,#48495,.F.); +#50991 = ORIENTED_EDGE('',*,*,#50961,.F.); +#50992 = PLANE('',#50993); +#50993 = AXIS2_PLACEMENT_3D('',#50994,#50995,#50996); +#50994 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#50995 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#50996 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#50997 = ADVANCED_FACE('',(#50998),#51034,.F.); +#50998 = FACE_BOUND('',#50999,.F.); +#50999 = EDGE_LOOP('',(#51000,#51001,#51009,#51017,#51025,#51031,#51032, + #51033)); +#51000 = ORIENTED_EDGE('',*,*,#48583,.F.); +#51001 = ORIENTED_EDGE('',*,*,#51002,.T.); +#51002 = EDGE_CURVE('',#48576,#51003,#51005,.T.); +#51003 = VERTEX_POINT('',#51004); +#51004 = CARTESIAN_POINT('',(0.1,-2.25,4.45)); +#51005 = LINE('',#51006,#51007); +#51006 = CARTESIAN_POINT('',(0.1,-2.3,4.5)); +#51007 = VECTOR('',#51008,1.); +#51008 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51009 = ORIENTED_EDGE('',*,*,#51010,.T.); +#51010 = EDGE_CURVE('',#51003,#51011,#51013,.T.); +#51011 = VERTEX_POINT('',#51012); +#51012 = CARTESIAN_POINT('',(0.1,-2.25,1.25)); +#51013 = LINE('',#51014,#51015); +#51014 = CARTESIAN_POINT('',(0.1,-2.25,4.45)); +#51015 = VECTOR('',#51016,1.); +#51016 = DIRECTION('',(0.,0.,-1.)); +#51017 = ORIENTED_EDGE('',*,*,#51018,.T.); +#51018 = EDGE_CURVE('',#51011,#51019,#51021,.T.); +#51019 = VERTEX_POINT('',#51020); +#51020 = CARTESIAN_POINT('',(0.1,-1.75,1.25)); +#51021 = LINE('',#51022,#51023); +#51022 = CARTESIAN_POINT('',(0.1,-2.25,1.25)); +#51023 = VECTOR('',#51024,1.); +#51024 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51025 = ORIENTED_EDGE('',*,*,#51026,.T.); +#51026 = EDGE_CURVE('',#51019,#50978,#51027,.T.); +#51027 = LINE('',#51028,#51029); +#51028 = CARTESIAN_POINT('',(0.1,-1.75,1.25)); +#51029 = VECTOR('',#51030,1.); +#51030 = DIRECTION('',(0.,0.,1.)); +#51031 = ORIENTED_EDGE('',*,*,#50985,.T.); +#51032 = ORIENTED_EDGE('',*,*,#48487,.F.); +#51033 = ORIENTED_EDGE('',*,*,#50897,.T.); +#51034 = PLANE('',#51035); +#51035 = AXIS2_PLACEMENT_3D('',#51036,#51037,#51038); +#51036 = CARTESIAN_POINT('',(0.1,-2.,2.448597401424)); +#51037 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#51038 = DIRECTION('',(0.,0.,1.)); +#51039 = ADVANCED_FACE('',(#51040),#51051,.T.); +#51040 = FACE_BOUND('',#51041,.T.); +#51041 = EDGE_LOOP('',(#51042,#51043,#51044,#51050)); +#51042 = ORIENTED_EDGE('',*,*,#48575,.T.); +#51043 = ORIENTED_EDGE('',*,*,#51002,.T.); +#51044 = ORIENTED_EDGE('',*,*,#51045,.F.); +#51045 = EDGE_CURVE('',#50930,#51003,#51046,.T.); +#51046 = LINE('',#51047,#51048); +#51047 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#51048 = VECTOR('',#51049,1.); +#51049 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51050 = ORIENTED_EDGE('',*,*,#50929,.F.); +#51051 = PLANE('',#51052); +#51052 = AXIS2_PLACEMENT_3D('',#51053,#51054,#51055); +#51053 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#51054 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51055 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51056 = ADVANCED_FACE('',(#51057),#51068,.T.); +#51057 = FACE_BOUND('',#51058,.T.); +#51058 = EDGE_LOOP('',(#51059,#51060,#51061,#51062)); +#51059 = ORIENTED_EDGE('',*,*,#48751,.T.); +#51060 = ORIENTED_EDGE('',*,*,#48614,.T.); +#51061 = ORIENTED_EDGE('',*,*,#48639,.T.); +#51062 = ORIENTED_EDGE('',*,*,#51063,.T.); +#51063 = EDGE_CURVE('',#48640,#48744,#51064,.T.); +#51064 = LINE('',#51065,#51066); +#51065 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,0.9)); +#51066 = VECTOR('',#51067,1.); +#51067 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51068 = PLANE('',#51069); +#51069 = AXIS2_PLACEMENT_3D('',#51070,#51071,#51072); +#51070 = CARTESIAN_POINT('',(2.775557561563E-17,-3.08148791102E-33,0.9) + ); +#51071 = DIRECTION('',(0.,0.,1.)); +#51072 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51073 = ADVANCED_FACE('',(#51074),#51085,.T.); +#51074 = FACE_BOUND('',#51075,.T.); +#51075 = EDGE_LOOP('',(#51076,#51077,#51083,#51084)); +#51076 = ORIENTED_EDGE('',*,*,#48719,.T.); +#51077 = ORIENTED_EDGE('',*,*,#51078,.F.); +#51078 = EDGE_CURVE('',#48664,#48720,#51079,.T.); +#51079 = LINE('',#51080,#51081); +#51080 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,0.9)); +#51081 = VECTOR('',#51082,1.); +#51082 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51083 = ORIENTED_EDGE('',*,*,#48671,.T.); +#51084 = ORIENTED_EDGE('',*,*,#48694,.T.); +#51085 = PLANE('',#51086); +#51086 = AXIS2_PLACEMENT_3D('',#51087,#51088,#51089); +#51087 = CARTESIAN_POINT('',(2.775557561563E-17,-3.08148791102E-33,0.9) + ); +#51088 = DIRECTION('',(0.,0.,1.)); +#51089 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51090 = ADVANCED_FACE('',(#51091),#51134,.T.); +#51091 = FACE_BOUND('',#51092,.T.); +#51092 = EDGE_LOOP('',(#51093,#51094,#51102,#51110,#51118,#51126,#51132, + #51133)); +#51093 = ORIENTED_EDGE('',*,*,#48727,.F.); +#51094 = ORIENTED_EDGE('',*,*,#51095,.T.); +#51095 = EDGE_CURVE('',#48728,#51096,#51098,.T.); +#51096 = VERTEX_POINT('',#51097); +#51097 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51098 = LINE('',#51099,#51100); +#51099 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#51100 = VECTOR('',#51101,1.); +#51101 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51102 = ORIENTED_EDGE('',*,*,#51103,.T.); +#51103 = EDGE_CURVE('',#51096,#51104,#51106,.T.); +#51104 = VERTEX_POINT('',#51105); +#51105 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51106 = LINE('',#51107,#51108); +#51107 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51108 = VECTOR('',#51109,1.); +#51109 = DIRECTION('',(0.,0.,-1.)); +#51110 = ORIENTED_EDGE('',*,*,#51111,.T.); +#51111 = EDGE_CURVE('',#51104,#51112,#51114,.T.); +#51112 = VERTEX_POINT('',#51113); +#51113 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51114 = LINE('',#51115,#51116); +#51115 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51116 = VECTOR('',#51117,1.); +#51117 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51118 = ORIENTED_EDGE('',*,*,#51119,.T.); +#51119 = EDGE_CURVE('',#51112,#51120,#51122,.T.); +#51120 = VERTEX_POINT('',#51121); +#51121 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51122 = LINE('',#51123,#51124); +#51123 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51124 = VECTOR('',#51125,1.); +#51125 = DIRECTION('',(0.,0.,1.)); +#51126 = ORIENTED_EDGE('',*,*,#51127,.T.); +#51127 = EDGE_CURVE('',#51120,#48656,#51128,.T.); +#51128 = LINE('',#51129,#51130); +#51129 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51130 = VECTOR('',#51131,1.); +#51131 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51132 = ORIENTED_EDGE('',*,*,#48663,.F.); +#51133 = ORIENTED_EDGE('',*,*,#51078,.T.); +#51134 = PLANE('',#51135); +#51135 = AXIS2_PLACEMENT_3D('',#51136,#51137,#51138); +#51136 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,2.448597401424)); +#51137 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#51138 = DIRECTION('',(0.,0.,1.)); +#51139 = ADVANCED_FACE('',(#51140),#51158,.T.); +#51140 = FACE_BOUND('',#51141,.T.); +#51141 = EDGE_LOOP('',(#51142,#51150,#51156,#51157)); +#51142 = ORIENTED_EDGE('',*,*,#51143,.T.); +#51143 = EDGE_CURVE('',#51120,#51144,#51146,.T.); +#51144 = VERTEX_POINT('',#51145); +#51145 = CARTESIAN_POINT('',(0.1,0.25,4.45)); +#51146 = LINE('',#51147,#51148); +#51147 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51148 = VECTOR('',#51149,1.); +#51149 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51150 = ORIENTED_EDGE('',*,*,#51151,.T.); +#51151 = EDGE_CURVE('',#51144,#48648,#51152,.T.); +#51152 = LINE('',#51153,#51154); +#51153 = CARTESIAN_POINT('',(0.1,0.25,4.45)); +#51154 = VECTOR('',#51155,1.); +#51155 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51156 = ORIENTED_EDGE('',*,*,#48655,.F.); +#51157 = ORIENTED_EDGE('',*,*,#51127,.F.); +#51158 = PLANE('',#51159); +#51159 = AXIS2_PLACEMENT_3D('',#51160,#51161,#51162); +#51160 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#51161 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#51162 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51163 = ADVANCED_FACE('',(#51164),#51200,.F.); +#51164 = FACE_BOUND('',#51165,.F.); +#51165 = EDGE_LOOP('',(#51166,#51167,#51175,#51183,#51191,#51197,#51198, + #51199)); +#51166 = ORIENTED_EDGE('',*,*,#48743,.F.); +#51167 = ORIENTED_EDGE('',*,*,#51168,.T.); +#51168 = EDGE_CURVE('',#48736,#51169,#51171,.T.); +#51169 = VERTEX_POINT('',#51170); +#51170 = CARTESIAN_POINT('',(0.1,-0.25,4.45)); +#51171 = LINE('',#51172,#51173); +#51172 = CARTESIAN_POINT('',(0.1,-0.3,4.5)); +#51173 = VECTOR('',#51174,1.); +#51174 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51175 = ORIENTED_EDGE('',*,*,#51176,.T.); +#51176 = EDGE_CURVE('',#51169,#51177,#51179,.T.); +#51177 = VERTEX_POINT('',#51178); +#51178 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#51179 = LINE('',#51180,#51181); +#51180 = CARTESIAN_POINT('',(0.1,-0.25,4.45)); +#51181 = VECTOR('',#51182,1.); +#51182 = DIRECTION('',(0.,0.,-1.)); +#51183 = ORIENTED_EDGE('',*,*,#51184,.T.); +#51184 = EDGE_CURVE('',#51177,#51185,#51187,.T.); +#51185 = VERTEX_POINT('',#51186); +#51186 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#51187 = LINE('',#51188,#51189); +#51188 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#51189 = VECTOR('',#51190,1.); +#51190 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51191 = ORIENTED_EDGE('',*,*,#51192,.T.); +#51192 = EDGE_CURVE('',#51185,#51144,#51193,.T.); +#51193 = LINE('',#51194,#51195); +#51194 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#51195 = VECTOR('',#51196,1.); +#51196 = DIRECTION('',(0.,0.,1.)); +#51197 = ORIENTED_EDGE('',*,*,#51151,.T.); +#51198 = ORIENTED_EDGE('',*,*,#48647,.F.); +#51199 = ORIENTED_EDGE('',*,*,#51063,.T.); +#51200 = PLANE('',#51201); +#51201 = AXIS2_PLACEMENT_3D('',#51202,#51203,#51204); +#51202 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,2.448597401424)); +#51203 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#51204 = DIRECTION('',(0.,0.,1.)); +#51205 = ADVANCED_FACE('',(#51206),#51217,.T.); +#51206 = FACE_BOUND('',#51207,.T.); +#51207 = EDGE_LOOP('',(#51208,#51209,#51210,#51216)); +#51208 = ORIENTED_EDGE('',*,*,#48735,.T.); +#51209 = ORIENTED_EDGE('',*,*,#51168,.T.); +#51210 = ORIENTED_EDGE('',*,*,#51211,.F.); +#51211 = EDGE_CURVE('',#51096,#51169,#51212,.T.); +#51212 = LINE('',#51213,#51214); +#51213 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51214 = VECTOR('',#51215,1.); +#51215 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51216 = ORIENTED_EDGE('',*,*,#51095,.F.); +#51217 = PLANE('',#51218); +#51218 = AXIS2_PLACEMENT_3D('',#51219,#51220,#51221); +#51219 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#51220 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#51221 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187 + )); +#51222 = ADVANCED_FACE('',(#51223),#51234,.T.); +#51223 = FACE_BOUND('',#51224,.T.); +#51224 = EDGE_LOOP('',(#51225,#51231,#51232,#51233)); +#51225 = ORIENTED_EDGE('',*,*,#51226,.T.); +#51226 = EDGE_CURVE('',#49618,#49691,#51227,.T.); +#51227 = LINE('',#51228,#51229); +#51228 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#51229 = VECTOR('',#51230,1.); +#51230 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51231 = ORIENTED_EDGE('',*,*,#49698,.T.); +#51232 = ORIENTED_EDGE('',*,*,#49649,.F.); +#51233 = ORIENTED_EDGE('',*,*,#49625,.F.); +#51234 = PLANE('',#51235); +#51235 = AXIS2_PLACEMENT_3D('',#51236,#51237,#51238); +#51236 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#51237 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51238 = DIRECTION('',(0.,0.,1.)); +#51239 = ADVANCED_FACE('',(#51240),#51251,.T.); +#51240 = FACE_BOUND('',#51241,.T.); +#51241 = EDGE_LOOP('',(#51242,#51248,#51249,#51250)); +#51242 = ORIENTED_EDGE('',*,*,#51243,.T.); +#51243 = EDGE_CURVE('',#49610,#49683,#51244,.T.); +#51244 = LINE('',#51245,#51246); +#51245 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#51246 = VECTOR('',#51247,1.); +#51247 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51248 = ORIENTED_EDGE('',*,*,#49690,.T.); +#51249 = ORIENTED_EDGE('',*,*,#51226,.F.); +#51250 = ORIENTED_EDGE('',*,*,#49617,.F.); +#51251 = PLANE('',#51252); +#51252 = AXIS2_PLACEMENT_3D('',#51253,#51254,#51255); +#51253 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#51254 = DIRECTION('',(0.,0.,1.)); +#51255 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51256 = ADVANCED_FACE('',(#51257),#51263,.T.); +#51257 = FACE_BOUND('',#51258,.T.); +#51258 = EDGE_LOOP('',(#51259,#51260,#51261,#51262)); +#51259 = ORIENTED_EDGE('',*,*,#49717,.T.); +#51260 = ORIENTED_EDGE('',*,*,#49682,.T.); +#51261 = ORIENTED_EDGE('',*,*,#51243,.F.); +#51262 = ORIENTED_EDGE('',*,*,#49609,.F.); +#51263 = PLANE('',#51264); +#51264 = AXIS2_PLACEMENT_3D('',#51265,#51266,#51267); +#51265 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#51266 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51267 = DIRECTION('',(0.,0.,-1.)); +#51268 = ADVANCED_FACE('',(#51269),#51280,.T.); +#51269 = FACE_BOUND('',#51270,.T.); +#51270 = EDGE_LOOP('',(#51271,#51277,#51278,#51279)); +#51271 = ORIENTED_EDGE('',*,*,#51272,.T.); +#51272 = EDGE_CURVE('',#49784,#49857,#51273,.T.); +#51273 = LINE('',#51274,#51275); +#51274 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#51275 = VECTOR('',#51276,1.); +#51276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51277 = ORIENTED_EDGE('',*,*,#49864,.T.); +#51278 = ORIENTED_EDGE('',*,*,#49815,.F.); +#51279 = ORIENTED_EDGE('',*,*,#49791,.F.); +#51280 = PLANE('',#51281); +#51281 = AXIS2_PLACEMENT_3D('',#51282,#51283,#51284); +#51282 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#51283 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51284 = DIRECTION('',(0.,0.,1.)); +#51285 = ADVANCED_FACE('',(#51286),#51297,.T.); +#51286 = FACE_BOUND('',#51287,.T.); +#51287 = EDGE_LOOP('',(#51288,#51294,#51295,#51296)); +#51288 = ORIENTED_EDGE('',*,*,#51289,.T.); +#51289 = EDGE_CURVE('',#49776,#49849,#51290,.T.); +#51290 = LINE('',#51291,#51292); +#51291 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#51292 = VECTOR('',#51293,1.); +#51293 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51294 = ORIENTED_EDGE('',*,*,#49856,.T.); +#51295 = ORIENTED_EDGE('',*,*,#51272,.F.); +#51296 = ORIENTED_EDGE('',*,*,#49783,.F.); +#51297 = PLANE('',#51298); +#51298 = AXIS2_PLACEMENT_3D('',#51299,#51300,#51301); +#51299 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#51300 = DIRECTION('',(0.,0.,1.)); +#51301 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51302 = ADVANCED_FACE('',(#51303),#51309,.T.); +#51303 = FACE_BOUND('',#51304,.T.); +#51304 = EDGE_LOOP('',(#51305,#51306,#51307,#51308)); +#51305 = ORIENTED_EDGE('',*,*,#49883,.T.); +#51306 = ORIENTED_EDGE('',*,*,#49848,.T.); +#51307 = ORIENTED_EDGE('',*,*,#51289,.F.); +#51308 = ORIENTED_EDGE('',*,*,#49775,.F.); +#51309 = PLANE('',#51310); +#51310 = AXIS2_PLACEMENT_3D('',#51311,#51312,#51313); +#51311 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#51312 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51313 = DIRECTION('',(0.,0.,-1.)); +#51314 = ADVANCED_FACE('',(#51315),#51326,.T.); +#51315 = FACE_BOUND('',#51316,.T.); +#51316 = EDGE_LOOP('',(#51317,#51323,#51324,#51325)); +#51317 = ORIENTED_EDGE('',*,*,#51318,.T.); +#51318 = EDGE_CURVE('',#49950,#50023,#51319,.T.); +#51319 = LINE('',#51320,#51321); +#51320 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#51321 = VECTOR('',#51322,1.); +#51322 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51323 = ORIENTED_EDGE('',*,*,#50030,.T.); +#51324 = ORIENTED_EDGE('',*,*,#49981,.F.); +#51325 = ORIENTED_EDGE('',*,*,#49957,.F.); +#51326 = PLANE('',#51327); +#51327 = AXIS2_PLACEMENT_3D('',#51328,#51329,#51330); +#51328 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#51329 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51330 = DIRECTION('',(0.,0.,1.)); +#51331 = ADVANCED_FACE('',(#51332),#51343,.T.); +#51332 = FACE_BOUND('',#51333,.T.); +#51333 = EDGE_LOOP('',(#51334,#51340,#51341,#51342)); +#51334 = ORIENTED_EDGE('',*,*,#51335,.T.); +#51335 = EDGE_CURVE('',#49942,#50015,#51336,.T.); +#51336 = LINE('',#51337,#51338); +#51337 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#51338 = VECTOR('',#51339,1.); +#51339 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51340 = ORIENTED_EDGE('',*,*,#50022,.T.); +#51341 = ORIENTED_EDGE('',*,*,#51318,.F.); +#51342 = ORIENTED_EDGE('',*,*,#49949,.F.); +#51343 = PLANE('',#51344); +#51344 = AXIS2_PLACEMENT_3D('',#51345,#51346,#51347); +#51345 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#51346 = DIRECTION('',(0.,0.,1.)); +#51347 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51348 = ADVANCED_FACE('',(#51349),#51355,.T.); +#51349 = FACE_BOUND('',#51350,.T.); +#51350 = EDGE_LOOP('',(#51351,#51352,#51353,#51354)); +#51351 = ORIENTED_EDGE('',*,*,#50049,.T.); +#51352 = ORIENTED_EDGE('',*,*,#50014,.T.); +#51353 = ORIENTED_EDGE('',*,*,#51335,.F.); +#51354 = ORIENTED_EDGE('',*,*,#49941,.F.); +#51355 = PLANE('',#51356); +#51356 = AXIS2_PLACEMENT_3D('',#51357,#51358,#51359); +#51357 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#51358 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51359 = DIRECTION('',(0.,0.,-1.)); +#51360 = ADVANCED_FACE('',(#51361),#51372,.T.); +#51361 = FACE_BOUND('',#51362,.T.); +#51362 = EDGE_LOOP('',(#51363,#51369,#51370,#51371)); +#51363 = ORIENTED_EDGE('',*,*,#51364,.T.); +#51364 = EDGE_CURVE('',#50116,#50189,#51365,.T.); +#51365 = LINE('',#51366,#51367); +#51366 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#51367 = VECTOR('',#51368,1.); +#51368 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51369 = ORIENTED_EDGE('',*,*,#50196,.T.); +#51370 = ORIENTED_EDGE('',*,*,#50147,.F.); +#51371 = ORIENTED_EDGE('',*,*,#50123,.F.); +#51372 = PLANE('',#51373); +#51373 = AXIS2_PLACEMENT_3D('',#51374,#51375,#51376); +#51374 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#51375 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51376 = DIRECTION('',(0.,0.,1.)); +#51377 = ADVANCED_FACE('',(#51378),#51389,.T.); +#51378 = FACE_BOUND('',#51379,.T.); +#51379 = EDGE_LOOP('',(#51380,#51386,#51387,#51388)); +#51380 = ORIENTED_EDGE('',*,*,#51381,.T.); +#51381 = EDGE_CURVE('',#50108,#50181,#51382,.T.); +#51382 = LINE('',#51383,#51384); +#51383 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#51384 = VECTOR('',#51385,1.); +#51385 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51386 = ORIENTED_EDGE('',*,*,#50188,.T.); +#51387 = ORIENTED_EDGE('',*,*,#51364,.F.); +#51388 = ORIENTED_EDGE('',*,*,#50115,.F.); +#51389 = PLANE('',#51390); +#51390 = AXIS2_PLACEMENT_3D('',#51391,#51392,#51393); +#51391 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#51392 = DIRECTION('',(0.,0.,1.)); +#51393 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51394 = ADVANCED_FACE('',(#51395),#51401,.T.); +#51395 = FACE_BOUND('',#51396,.T.); +#51396 = EDGE_LOOP('',(#51397,#51398,#51399,#51400)); +#51397 = ORIENTED_EDGE('',*,*,#50215,.T.); +#51398 = ORIENTED_EDGE('',*,*,#50180,.T.); +#51399 = ORIENTED_EDGE('',*,*,#51381,.F.); +#51400 = ORIENTED_EDGE('',*,*,#50107,.F.); +#51401 = PLANE('',#51402); +#51402 = AXIS2_PLACEMENT_3D('',#51403,#51404,#51405); +#51403 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#51404 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51405 = DIRECTION('',(0.,0.,-1.)); +#51406 = ADVANCED_FACE('',(#51407),#51418,.T.); +#51407 = FACE_BOUND('',#51408,.T.); +#51408 = EDGE_LOOP('',(#51409,#51415,#51416,#51417)); +#51409 = ORIENTED_EDGE('',*,*,#51410,.T.); +#51410 = EDGE_CURVE('',#50282,#50355,#51411,.T.); +#51411 = LINE('',#51412,#51413); +#51412 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#51413 = VECTOR('',#51414,1.); +#51414 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51415 = ORIENTED_EDGE('',*,*,#50362,.T.); +#51416 = ORIENTED_EDGE('',*,*,#50313,.F.); +#51417 = ORIENTED_EDGE('',*,*,#50289,.F.); +#51418 = PLANE('',#51419); +#51419 = AXIS2_PLACEMENT_3D('',#51420,#51421,#51422); +#51420 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#51421 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51422 = DIRECTION('',(0.,0.,1.)); +#51423 = ADVANCED_FACE('',(#51424),#51435,.T.); +#51424 = FACE_BOUND('',#51425,.T.); +#51425 = EDGE_LOOP('',(#51426,#51432,#51433,#51434)); +#51426 = ORIENTED_EDGE('',*,*,#51427,.T.); +#51427 = EDGE_CURVE('',#50274,#50347,#51428,.T.); +#51428 = LINE('',#51429,#51430); +#51429 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#51430 = VECTOR('',#51431,1.); +#51431 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51432 = ORIENTED_EDGE('',*,*,#50354,.T.); +#51433 = ORIENTED_EDGE('',*,*,#51410,.F.); +#51434 = ORIENTED_EDGE('',*,*,#50281,.F.); +#51435 = PLANE('',#51436); +#51436 = AXIS2_PLACEMENT_3D('',#51437,#51438,#51439); +#51437 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#51438 = DIRECTION('',(0.,0.,1.)); +#51439 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51440 = ADVANCED_FACE('',(#51441),#51447,.T.); +#51441 = FACE_BOUND('',#51442,.T.); +#51442 = EDGE_LOOP('',(#51443,#51444,#51445,#51446)); +#51443 = ORIENTED_EDGE('',*,*,#50381,.T.); +#51444 = ORIENTED_EDGE('',*,*,#50346,.T.); +#51445 = ORIENTED_EDGE('',*,*,#51427,.F.); +#51446 = ORIENTED_EDGE('',*,*,#50273,.F.); +#51447 = PLANE('',#51448); +#51448 = AXIS2_PLACEMENT_3D('',#51449,#51450,#51451); +#51449 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#51450 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51451 = DIRECTION('',(0.,0.,-1.)); +#51452 = ADVANCED_FACE('',(#51453),#51464,.T.); +#51453 = FACE_BOUND('',#51454,.T.); +#51454 = EDGE_LOOP('',(#51455,#51461,#51462,#51463)); +#51455 = ORIENTED_EDGE('',*,*,#51456,.T.); +#51456 = EDGE_CURVE('',#50448,#50521,#51457,.T.); +#51457 = LINE('',#51458,#51459); +#51458 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#51459 = VECTOR('',#51460,1.); +#51460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51461 = ORIENTED_EDGE('',*,*,#50528,.T.); +#51462 = ORIENTED_EDGE('',*,*,#50479,.F.); +#51463 = ORIENTED_EDGE('',*,*,#50455,.F.); +#51464 = PLANE('',#51465); +#51465 = AXIS2_PLACEMENT_3D('',#51466,#51467,#51468); +#51466 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#51467 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51468 = DIRECTION('',(0.,0.,1.)); +#51469 = ADVANCED_FACE('',(#51470),#51481,.T.); +#51470 = FACE_BOUND('',#51471,.T.); +#51471 = EDGE_LOOP('',(#51472,#51478,#51479,#51480)); +#51472 = ORIENTED_EDGE('',*,*,#51473,.T.); +#51473 = EDGE_CURVE('',#50440,#50513,#51474,.T.); +#51474 = LINE('',#51475,#51476); +#51475 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#51476 = VECTOR('',#51477,1.); +#51477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51478 = ORIENTED_EDGE('',*,*,#50520,.T.); +#51479 = ORIENTED_EDGE('',*,*,#51456,.F.); +#51480 = ORIENTED_EDGE('',*,*,#50447,.F.); +#51481 = PLANE('',#51482); +#51482 = AXIS2_PLACEMENT_3D('',#51483,#51484,#51485); +#51483 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#51484 = DIRECTION('',(0.,0.,1.)); +#51485 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51486 = ADVANCED_FACE('',(#51487),#51493,.T.); +#51487 = FACE_BOUND('',#51488,.T.); +#51488 = EDGE_LOOP('',(#51489,#51490,#51491,#51492)); +#51489 = ORIENTED_EDGE('',*,*,#50547,.T.); +#51490 = ORIENTED_EDGE('',*,*,#50512,.T.); +#51491 = ORIENTED_EDGE('',*,*,#51473,.F.); +#51492 = ORIENTED_EDGE('',*,*,#50439,.F.); +#51493 = PLANE('',#51494); +#51494 = AXIS2_PLACEMENT_3D('',#51495,#51496,#51497); +#51495 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#51496 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51497 = DIRECTION('',(0.,0.,-1.)); +#51498 = ADVANCED_FACE('',(#51499),#51510,.T.); +#51499 = FACE_BOUND('',#51500,.T.); +#51500 = EDGE_LOOP('',(#51501,#51507,#51508,#51509)); +#51501 = ORIENTED_EDGE('',*,*,#51502,.T.); +#51502 = EDGE_CURVE('',#50614,#50687,#51503,.T.); +#51503 = LINE('',#51504,#51505); +#51504 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#51505 = VECTOR('',#51506,1.); +#51506 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51507 = ORIENTED_EDGE('',*,*,#50694,.T.); +#51508 = ORIENTED_EDGE('',*,*,#50645,.F.); +#51509 = ORIENTED_EDGE('',*,*,#50621,.F.); +#51510 = PLANE('',#51511); +#51511 = AXIS2_PLACEMENT_3D('',#51512,#51513,#51514); +#51512 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#51513 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51514 = DIRECTION('',(0.,0.,1.)); +#51515 = ADVANCED_FACE('',(#51516),#51527,.T.); +#51516 = FACE_BOUND('',#51517,.T.); +#51517 = EDGE_LOOP('',(#51518,#51524,#51525,#51526)); +#51518 = ORIENTED_EDGE('',*,*,#51519,.T.); +#51519 = EDGE_CURVE('',#50606,#50679,#51520,.T.); +#51520 = LINE('',#51521,#51522); +#51521 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#51522 = VECTOR('',#51523,1.); +#51523 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51524 = ORIENTED_EDGE('',*,*,#50686,.T.); +#51525 = ORIENTED_EDGE('',*,*,#51502,.F.); +#51526 = ORIENTED_EDGE('',*,*,#50613,.F.); +#51527 = PLANE('',#51528); +#51528 = AXIS2_PLACEMENT_3D('',#51529,#51530,#51531); +#51529 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#51530 = DIRECTION('',(0.,0.,1.)); +#51531 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51532 = ADVANCED_FACE('',(#51533),#51539,.T.); +#51533 = FACE_BOUND('',#51534,.T.); +#51534 = EDGE_LOOP('',(#51535,#51536,#51537,#51538)); +#51535 = ORIENTED_EDGE('',*,*,#50713,.T.); +#51536 = ORIENTED_EDGE('',*,*,#50678,.T.); +#51537 = ORIENTED_EDGE('',*,*,#51519,.F.); +#51538 = ORIENTED_EDGE('',*,*,#50605,.F.); +#51539 = PLANE('',#51540); +#51540 = AXIS2_PLACEMENT_3D('',#51541,#51542,#51543); +#51541 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#51542 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51543 = DIRECTION('',(0.,0.,-1.)); +#51544 = ADVANCED_FACE('',(#51545),#51556,.T.); +#51545 = FACE_BOUND('',#51546,.T.); +#51546 = EDGE_LOOP('',(#51547,#51553,#51554,#51555)); +#51547 = ORIENTED_EDGE('',*,*,#51548,.T.); +#51548 = EDGE_CURVE('',#50780,#50853,#51549,.T.); +#51549 = LINE('',#51550,#51551); +#51550 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#51551 = VECTOR('',#51552,1.); +#51552 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51553 = ORIENTED_EDGE('',*,*,#50860,.T.); +#51554 = ORIENTED_EDGE('',*,*,#50811,.F.); +#51555 = ORIENTED_EDGE('',*,*,#50787,.F.); +#51556 = PLANE('',#51557); +#51557 = AXIS2_PLACEMENT_3D('',#51558,#51559,#51560); +#51558 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#51559 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51560 = DIRECTION('',(0.,0.,1.)); +#51561 = ADVANCED_FACE('',(#51562),#51573,.T.); +#51562 = FACE_BOUND('',#51563,.T.); +#51563 = EDGE_LOOP('',(#51564,#51570,#51571,#51572)); +#51564 = ORIENTED_EDGE('',*,*,#51565,.T.); +#51565 = EDGE_CURVE('',#50772,#50845,#51566,.T.); +#51566 = LINE('',#51567,#51568); +#51567 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#51568 = VECTOR('',#51569,1.); +#51569 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51570 = ORIENTED_EDGE('',*,*,#50852,.T.); +#51571 = ORIENTED_EDGE('',*,*,#51548,.F.); +#51572 = ORIENTED_EDGE('',*,*,#50779,.F.); +#51573 = PLANE('',#51574); +#51574 = AXIS2_PLACEMENT_3D('',#51575,#51576,#51577); +#51575 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#51576 = DIRECTION('',(0.,0.,1.)); +#51577 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51578 = ADVANCED_FACE('',(#51579),#51585,.T.); +#51579 = FACE_BOUND('',#51580,.T.); +#51580 = EDGE_LOOP('',(#51581,#51582,#51583,#51584)); +#51581 = ORIENTED_EDGE('',*,*,#50879,.T.); +#51582 = ORIENTED_EDGE('',*,*,#50844,.T.); +#51583 = ORIENTED_EDGE('',*,*,#51565,.F.); +#51584 = ORIENTED_EDGE('',*,*,#50771,.F.); +#51585 = PLANE('',#51586); +#51586 = AXIS2_PLACEMENT_3D('',#51587,#51588,#51589); +#51587 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#51588 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51589 = DIRECTION('',(0.,0.,-1.)); +#51590 = ADVANCED_FACE('',(#51591),#51602,.T.); +#51591 = FACE_BOUND('',#51592,.T.); +#51592 = EDGE_LOOP('',(#51593,#51599,#51600,#51601)); +#51593 = ORIENTED_EDGE('',*,*,#51594,.T.); +#51594 = EDGE_CURVE('',#50946,#51019,#51595,.T.); +#51595 = LINE('',#51596,#51597); +#51596 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#51597 = VECTOR('',#51598,1.); +#51598 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51599 = ORIENTED_EDGE('',*,*,#51026,.T.); +#51600 = ORIENTED_EDGE('',*,*,#50977,.F.); +#51601 = ORIENTED_EDGE('',*,*,#50953,.F.); +#51602 = PLANE('',#51603); +#51603 = AXIS2_PLACEMENT_3D('',#51604,#51605,#51606); +#51604 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#51605 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51606 = DIRECTION('',(0.,0.,1.)); +#51607 = ADVANCED_FACE('',(#51608),#51619,.T.); +#51608 = FACE_BOUND('',#51609,.T.); +#51609 = EDGE_LOOP('',(#51610,#51616,#51617,#51618)); +#51610 = ORIENTED_EDGE('',*,*,#51611,.T.); +#51611 = EDGE_CURVE('',#50938,#51011,#51612,.T.); +#51612 = LINE('',#51613,#51614); +#51613 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#51614 = VECTOR('',#51615,1.); +#51615 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51616 = ORIENTED_EDGE('',*,*,#51018,.T.); +#51617 = ORIENTED_EDGE('',*,*,#51594,.F.); +#51618 = ORIENTED_EDGE('',*,*,#50945,.F.); +#51619 = PLANE('',#51620); +#51620 = AXIS2_PLACEMENT_3D('',#51621,#51622,#51623); +#51621 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#51622 = DIRECTION('',(0.,0.,1.)); +#51623 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51624 = ADVANCED_FACE('',(#51625),#51631,.T.); +#51625 = FACE_BOUND('',#51626,.T.); +#51626 = EDGE_LOOP('',(#51627,#51628,#51629,#51630)); +#51627 = ORIENTED_EDGE('',*,*,#51045,.T.); +#51628 = ORIENTED_EDGE('',*,*,#51010,.T.); +#51629 = ORIENTED_EDGE('',*,*,#51611,.F.); +#51630 = ORIENTED_EDGE('',*,*,#50937,.F.); +#51631 = PLANE('',#51632); +#51632 = AXIS2_PLACEMENT_3D('',#51633,#51634,#51635); +#51633 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#51634 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51635 = DIRECTION('',(0.,0.,-1.)); +#51636 = ADVANCED_FACE('',(#51637),#51648,.T.); +#51637 = FACE_BOUND('',#51638,.T.); +#51638 = EDGE_LOOP('',(#51639,#51645,#51646,#51647)); +#51639 = ORIENTED_EDGE('',*,*,#51640,.T.); +#51640 = EDGE_CURVE('',#51112,#51185,#51641,.T.); +#51641 = LINE('',#51642,#51643); +#51642 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51643 = VECTOR('',#51644,1.); +#51644 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51645 = ORIENTED_EDGE('',*,*,#51192,.T.); +#51646 = ORIENTED_EDGE('',*,*,#51143,.F.); +#51647 = ORIENTED_EDGE('',*,*,#51119,.F.); +#51648 = PLANE('',#51649); +#51649 = AXIS2_PLACEMENT_3D('',#51650,#51651,#51652); +#51650 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#51651 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#51652 = DIRECTION('',(0.,0.,1.)); +#51653 = ADVANCED_FACE('',(#51654),#51665,.T.); +#51654 = FACE_BOUND('',#51655,.T.); +#51655 = EDGE_LOOP('',(#51656,#51662,#51663,#51664)); +#51656 = ORIENTED_EDGE('',*,*,#51657,.T.); +#51657 = EDGE_CURVE('',#51104,#51177,#51658,.T.); +#51658 = LINE('',#51659,#51660); +#51659 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51660 = VECTOR('',#51661,1.); +#51661 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#51662 = ORIENTED_EDGE('',*,*,#51184,.T.); +#51663 = ORIENTED_EDGE('',*,*,#51640,.F.); +#51664 = ORIENTED_EDGE('',*,*,#51111,.F.); +#51665 = PLANE('',#51666); +#51666 = AXIS2_PLACEMENT_3D('',#51667,#51668,#51669); +#51667 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#51668 = DIRECTION('',(0.,0.,1.)); +#51669 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#51670 = ADVANCED_FACE('',(#51671),#51677,.T.); +#51671 = FACE_BOUND('',#51672,.T.); +#51672 = EDGE_LOOP('',(#51673,#51674,#51675,#51676)); +#51673 = ORIENTED_EDGE('',*,*,#51211,.T.); +#51674 = ORIENTED_EDGE('',*,*,#51176,.T.); +#51675 = ORIENTED_EDGE('',*,*,#51657,.F.); +#51676 = ORIENTED_EDGE('',*,*,#51103,.F.); +#51677 = PLANE('',#51678); +#51678 = AXIS2_PLACEMENT_3D('',#51679,#51680,#51681); +#51679 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#51680 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51681 = DIRECTION('',(0.,0.,-1.)); +#51682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#51686)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#51683,#51684,#51685)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#51683 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#51684 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#51685 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#51686 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#51683, + 'distance_accuracy_value','confusion accuracy'); +#51687 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51688,#51690); +#51688 = ( REPRESENTATION_RELATIONSHIP('','',#43639,#43616) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51689) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51689 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43617); +#51690 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51691); +#51691 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('37','=>[0:1:1:27]','',#43611, + #43634,$); +#51692 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#43636)); +#51693 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51694,#51696); +#51694 = ( REPRESENTATION_RELATIONSHIP('','',#4928,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51695) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51695 = ITEM_DEFINED_TRANSFORMATION('','',#11,#115); +#51696 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51697); +#51697 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('39','D2','',#5,#4923,$); +#51698 = SHAPE_DEFINITION_REPRESENTATION(#51699,#51705); +#51699 = PRODUCT_DEFINITION_SHAPE('','',#51700); +#51700 = PRODUCT_DEFINITION('design','',#51701,#51704); +#51701 = PRODUCT_DEFINITION_FORMATION('','',#51702); +#51702 = PRODUCT('R_1206_3216Metric','R_1206_3216Metric','',(#51703)); +#51703 = PRODUCT_CONTEXT('',#2,'mechanical'); +#51704 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#51705 = SHAPE_REPRESENTATION('',(#11,#51706),#51710); +#51706 = AXIS2_PLACEMENT_3D('',#51707,#51708,#51709); +#51707 = CARTESIAN_POINT('',(0.,0.,0.)); +#51708 = DIRECTION('',(0.,0.,1.)); +#51709 = DIRECTION('',(1.,0.,-0.)); +#51710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#51714)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#51711,#51712,#51713)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#51711 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#51712 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#51713 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#51714 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#51711, + 'distance_accuracy_value','confusion accuracy'); +#51715 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51716,#51718); +#51716 = ( REPRESENTATION_RELATIONSHIP('','',#51705,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51717) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51717 = ITEM_DEFINED_TRANSFORMATION('','',#11,#119); +#51718 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51719); +#51719 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','RS1','',#5,#51700,$); +#51720 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#51702)); +#51721 = SHAPE_DEFINITION_REPRESENTATION(#51722,#51728); +#51722 = PRODUCT_DEFINITION_SHAPE('','',#51723); +#51723 = PRODUCT_DEFINITION('design','',#51724,#51727); +#51724 = PRODUCT_DEFINITION_FORMATION('','',#51725); +#51725 = PRODUCT('R_1206_3216Metric','R_1206_3216Metric','',(#51726)); +#51726 = PRODUCT_CONTEXT('',#2,'mechanical'); +#51727 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#51728 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#51729),#52519); +#51729 = MANIFOLD_SOLID_BREP('',#51730); +#51730 = CLOSED_SHELL('',(#51731,#51771,#51854,#51879,#51904,#51971, + #51988,#52005,#52054,#52071,#52088,#52137,#52154,#52223,#52254, + #52278,#52347,#52371,#52388,#52405,#52422,#52439,#52456,#52473, + #52490,#52507)); +#51731 = ADVANCED_FACE('',(#51732),#51766,.F.); +#51732 = FACE_BOUND('',#51733,.F.); +#51733 = EDGE_LOOP('',(#51734,#51744,#51752,#51760)); +#51734 = ORIENTED_EDGE('',*,*,#51735,.F.); +#51735 = EDGE_CURVE('',#51736,#51738,#51740,.T.); +#51736 = VERTEX_POINT('',#51737); +#51737 = CARTESIAN_POINT('',(-1.6,-0.8,5.5E-02)); +#51738 = VERTEX_POINT('',#51739); +#51739 = CARTESIAN_POINT('',(-1.6,-0.8,0.495)); +#51740 = LINE('',#51741,#51742); +#51741 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51742 = VECTOR('',#51743,1.); +#51743 = DIRECTION('',(0.,0.,1.)); +#51744 = ORIENTED_EDGE('',*,*,#51745,.T.); +#51745 = EDGE_CURVE('',#51736,#51746,#51748,.T.); +#51746 = VERTEX_POINT('',#51747); +#51747 = CARTESIAN_POINT('',(-1.6,0.8,5.5E-02)); +#51748 = LINE('',#51749,#51750); +#51749 = CARTESIAN_POINT('',(-1.6,-0.8,5.5E-02)); +#51750 = VECTOR('',#51751,1.); +#51751 = DIRECTION('',(0.,1.,0.)); +#51752 = ORIENTED_EDGE('',*,*,#51753,.T.); +#51753 = EDGE_CURVE('',#51746,#51754,#51756,.T.); +#51754 = VERTEX_POINT('',#51755); +#51755 = CARTESIAN_POINT('',(-1.6,0.8,0.495)); +#51756 = LINE('',#51757,#51758); +#51757 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#51758 = VECTOR('',#51759,1.); +#51759 = DIRECTION('',(0.,0.,1.)); +#51760 = ORIENTED_EDGE('',*,*,#51761,.F.); +#51761 = EDGE_CURVE('',#51738,#51754,#51762,.T.); +#51762 = LINE('',#51763,#51764); +#51763 = CARTESIAN_POINT('',(-1.6,-0.8,0.495)); +#51764 = VECTOR('',#51765,1.); +#51765 = DIRECTION('',(0.,1.,0.)); +#51766 = PLANE('',#51767); +#51767 = AXIS2_PLACEMENT_3D('',#51768,#51769,#51770); +#51768 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51769 = DIRECTION('',(1.,0.,0.)); +#51770 = DIRECTION('',(0.,0.,1.)); +#51771 = ADVANCED_FACE('',(#51772),#51849,.F.); +#51772 = FACE_BOUND('',#51773,.F.); +#51773 = EDGE_LOOP('',(#51774,#51784,#51791,#51792,#51801,#51809,#51818, + #51826,#51834,#51842)); +#51774 = ORIENTED_EDGE('',*,*,#51775,.F.); +#51775 = EDGE_CURVE('',#51776,#51778,#51780,.T.); +#51776 = VERTEX_POINT('',#51777); +#51777 = CARTESIAN_POINT('',(-1.545,-0.8,0.)); +#51778 = VERTEX_POINT('',#51779); +#51779 = CARTESIAN_POINT('',(-1.255,-0.8,0.)); +#51780 = LINE('',#51781,#51782); +#51781 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51782 = VECTOR('',#51783,1.); +#51783 = DIRECTION('',(1.,0.,0.)); +#51784 = ORIENTED_EDGE('',*,*,#51785,.F.); +#51785 = EDGE_CURVE('',#51736,#51776,#51786,.T.); +#51786 = CIRCLE('',#51787,5.5E-02); +#51787 = AXIS2_PLACEMENT_3D('',#51788,#51789,#51790); +#51788 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51789 = DIRECTION('',(0.,-1.,0.)); +#51790 = DIRECTION('',(0.,0.,1.)); +#51791 = ORIENTED_EDGE('',*,*,#51735,.T.); +#51792 = ORIENTED_EDGE('',*,*,#51793,.T.); +#51793 = EDGE_CURVE('',#51738,#51794,#51796,.T.); +#51794 = VERTEX_POINT('',#51795); +#51795 = CARTESIAN_POINT('',(-1.545,-0.8,0.55)); +#51796 = CIRCLE('',#51797,5.5E-02); +#51797 = AXIS2_PLACEMENT_3D('',#51798,#51799,#51800); +#51798 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51799 = DIRECTION('',(0.,1.,0.)); +#51800 = DIRECTION('',(0.,-0.,1.)); +#51801 = ORIENTED_EDGE('',*,*,#51802,.T.); +#51802 = EDGE_CURVE('',#51794,#51803,#51805,.T.); +#51803 = VERTEX_POINT('',#51804); +#51804 = CARTESIAN_POINT('',(-1.255,-0.8,0.55)); +#51805 = LINE('',#51806,#51807); +#51806 = CARTESIAN_POINT('',(-1.6,-0.8,0.55)); +#51807 = VECTOR('',#51808,1.); +#51808 = DIRECTION('',(1.,0.,0.)); +#51809 = ORIENTED_EDGE('',*,*,#51810,.F.); +#51810 = EDGE_CURVE('',#51811,#51803,#51813,.T.); +#51811 = VERTEX_POINT('',#51812); +#51812 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#51813 = CIRCLE('',#51814,5.5E-02); +#51814 = AXIS2_PLACEMENT_3D('',#51815,#51816,#51817); +#51815 = CARTESIAN_POINT('',(-1.255,-0.8,0.495)); +#51816 = DIRECTION('',(0.,-1.,0.)); +#51817 = DIRECTION('',(0.,0.,1.)); +#51818 = ORIENTED_EDGE('',*,*,#51819,.F.); +#51819 = EDGE_CURVE('',#51820,#51811,#51822,.T.); +#51820 = VERTEX_POINT('',#51821); +#51821 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51822 = LINE('',#51823,#51824); +#51823 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51824 = VECTOR('',#51825,1.); +#51825 = DIRECTION('',(1.,0.,0.)); +#51826 = ORIENTED_EDGE('',*,*,#51827,.F.); +#51827 = EDGE_CURVE('',#51828,#51820,#51830,.T.); +#51828 = VERTEX_POINT('',#51829); +#51829 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51830 = LINE('',#51831,#51832); +#51831 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51832 = VECTOR('',#51833,1.); +#51833 = DIRECTION('',(0.,0.,1.)); +#51834 = ORIENTED_EDGE('',*,*,#51835,.T.); +#51835 = EDGE_CURVE('',#51828,#51836,#51838,.T.); +#51836 = VERTEX_POINT('',#51837); +#51837 = CARTESIAN_POINT('',(-1.2,-0.8,5.5E-02)); +#51838 = LINE('',#51839,#51840); +#51839 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51840 = VECTOR('',#51841,1.); +#51841 = DIRECTION('',(1.,0.,0.)); +#51842 = ORIENTED_EDGE('',*,*,#51843,.T.); +#51843 = EDGE_CURVE('',#51836,#51778,#51844,.T.); +#51844 = CIRCLE('',#51845,5.5E-02); +#51845 = AXIS2_PLACEMENT_3D('',#51846,#51847,#51848); +#51846 = CARTESIAN_POINT('',(-1.255,-0.8,5.5E-02)); +#51847 = DIRECTION('',(0.,1.,0.)); +#51848 = DIRECTION('',(0.,-0.,1.)); +#51849 = PLANE('',#51850); +#51850 = AXIS2_PLACEMENT_3D('',#51851,#51852,#51853); +#51851 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51852 = DIRECTION('',(0.,1.,0.)); +#51853 = DIRECTION('',(0.,-0.,1.)); +#51854 = ADVANCED_FACE('',(#51855),#51874,.T.); +#51855 = FACE_BOUND('',#51856,.T.); +#51856 = EDGE_LOOP('',(#51857,#51858,#51867,#51873)); +#51857 = ORIENTED_EDGE('',*,*,#51745,.T.); +#51858 = ORIENTED_EDGE('',*,*,#51859,.T.); +#51859 = EDGE_CURVE('',#51746,#51860,#51862,.T.); +#51860 = VERTEX_POINT('',#51861); +#51861 = CARTESIAN_POINT('',(-1.545,0.8,0.)); +#51862 = CIRCLE('',#51863,5.5E-02); +#51863 = AXIS2_PLACEMENT_3D('',#51864,#51865,#51866); +#51864 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51865 = DIRECTION('',(0.,-1.,0.)); +#51866 = DIRECTION('',(0.,0.,1.)); +#51867 = ORIENTED_EDGE('',*,*,#51868,.F.); +#51868 = EDGE_CURVE('',#51776,#51860,#51869,.T.); +#51869 = LINE('',#51870,#51871); +#51870 = CARTESIAN_POINT('',(-1.545,-0.8,0.)); +#51871 = VECTOR('',#51872,1.); +#51872 = DIRECTION('',(0.,1.,0.)); +#51873 = ORIENTED_EDGE('',*,*,#51785,.F.); +#51874 = CYLINDRICAL_SURFACE('',#51875,5.5E-02); +#51875 = AXIS2_PLACEMENT_3D('',#51876,#51877,#51878); +#51876 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#51877 = DIRECTION('',(0.,1.,0.)); +#51878 = DIRECTION('',(-1.,0.,0.)); +#51879 = ADVANCED_FACE('',(#51880),#51899,.T.); +#51880 = FACE_BOUND('',#51881,.T.); +#51881 = EDGE_LOOP('',(#51882,#51883,#51891,#51898)); +#51882 = ORIENTED_EDGE('',*,*,#51793,.T.); +#51883 = ORIENTED_EDGE('',*,*,#51884,.T.); +#51884 = EDGE_CURVE('',#51794,#51885,#51887,.T.); +#51885 = VERTEX_POINT('',#51886); +#51886 = CARTESIAN_POINT('',(-1.545,0.8,0.55)); +#51887 = LINE('',#51888,#51889); +#51888 = CARTESIAN_POINT('',(-1.545,-0.8,0.55)); +#51889 = VECTOR('',#51890,1.); +#51890 = DIRECTION('',(0.,1.,0.)); +#51891 = ORIENTED_EDGE('',*,*,#51892,.F.); +#51892 = EDGE_CURVE('',#51754,#51885,#51893,.T.); +#51893 = CIRCLE('',#51894,5.5E-02); +#51894 = AXIS2_PLACEMENT_3D('',#51895,#51896,#51897); +#51895 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#51896 = DIRECTION('',(0.,1.,0.)); +#51897 = DIRECTION('',(0.,-0.,1.)); +#51898 = ORIENTED_EDGE('',*,*,#51761,.F.); +#51899 = CYLINDRICAL_SURFACE('',#51900,5.5E-02); +#51900 = AXIS2_PLACEMENT_3D('',#51901,#51902,#51903); +#51901 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#51902 = DIRECTION('',(0.,1.,0.)); +#51903 = DIRECTION('',(-1.,0.,0.)); +#51904 = ADVANCED_FACE('',(#51905),#51966,.T.); +#51905 = FACE_BOUND('',#51906,.T.); +#51906 = EDGE_LOOP('',(#51907,#51915,#51916,#51917,#51918,#51926,#51935, + #51943,#51951,#51959)); +#51907 = ORIENTED_EDGE('',*,*,#51908,.F.); +#51908 = EDGE_CURVE('',#51860,#51909,#51911,.T.); +#51909 = VERTEX_POINT('',#51910); +#51910 = CARTESIAN_POINT('',(-1.255,0.8,0.)); +#51911 = LINE('',#51912,#51913); +#51912 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#51913 = VECTOR('',#51914,1.); +#51914 = DIRECTION('',(1.,0.,0.)); +#51915 = ORIENTED_EDGE('',*,*,#51859,.F.); +#51916 = ORIENTED_EDGE('',*,*,#51753,.T.); +#51917 = ORIENTED_EDGE('',*,*,#51892,.T.); +#51918 = ORIENTED_EDGE('',*,*,#51919,.T.); +#51919 = EDGE_CURVE('',#51885,#51920,#51922,.T.); +#51920 = VERTEX_POINT('',#51921); +#51921 = CARTESIAN_POINT('',(-1.255,0.8,0.55)); +#51922 = LINE('',#51923,#51924); +#51923 = CARTESIAN_POINT('',(-1.6,0.8,0.55)); +#51924 = VECTOR('',#51925,1.); +#51925 = DIRECTION('',(1.,0.,0.)); +#51926 = ORIENTED_EDGE('',*,*,#51927,.F.); +#51927 = EDGE_CURVE('',#51928,#51920,#51930,.T.); +#51928 = VERTEX_POINT('',#51929); +#51929 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#51930 = CIRCLE('',#51931,5.5E-02); +#51931 = AXIS2_PLACEMENT_3D('',#51932,#51933,#51934); +#51932 = CARTESIAN_POINT('',(-1.255,0.8,0.495)); +#51933 = DIRECTION('',(0.,-1.,0.)); +#51934 = DIRECTION('',(0.,0.,1.)); +#51935 = ORIENTED_EDGE('',*,*,#51936,.F.); +#51936 = EDGE_CURVE('',#51937,#51928,#51939,.T.); +#51937 = VERTEX_POINT('',#51938); +#51938 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#51939 = LINE('',#51940,#51941); +#51940 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#51941 = VECTOR('',#51942,1.); +#51942 = DIRECTION('',(1.,0.,0.)); +#51943 = ORIENTED_EDGE('',*,*,#51944,.F.); +#51944 = EDGE_CURVE('',#51945,#51937,#51947,.T.); +#51945 = VERTEX_POINT('',#51946); +#51946 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51947 = LINE('',#51948,#51949); +#51948 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51949 = VECTOR('',#51950,1.); +#51950 = DIRECTION('',(0.,0.,1.)); +#51951 = ORIENTED_EDGE('',*,*,#51952,.T.); +#51952 = EDGE_CURVE('',#51945,#51953,#51955,.T.); +#51953 = VERTEX_POINT('',#51954); +#51954 = CARTESIAN_POINT('',(-1.2,0.8,5.5E-02)); +#51955 = LINE('',#51956,#51957); +#51956 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#51957 = VECTOR('',#51958,1.); +#51958 = DIRECTION('',(1.,0.,0.)); +#51959 = ORIENTED_EDGE('',*,*,#51960,.T.); +#51960 = EDGE_CURVE('',#51953,#51909,#51961,.T.); +#51961 = CIRCLE('',#51962,5.5E-02); +#51962 = AXIS2_PLACEMENT_3D('',#51963,#51964,#51965); +#51963 = CARTESIAN_POINT('',(-1.255,0.8,5.5E-02)); +#51964 = DIRECTION('',(0.,1.,0.)); +#51965 = DIRECTION('',(0.,-0.,1.)); +#51966 = PLANE('',#51967); +#51967 = AXIS2_PLACEMENT_3D('',#51968,#51969,#51970); +#51968 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#51969 = DIRECTION('',(0.,1.,0.)); +#51970 = DIRECTION('',(0.,-0.,1.)); +#51971 = ADVANCED_FACE('',(#51972),#51983,.F.); +#51972 = FACE_BOUND('',#51973,.F.); +#51973 = EDGE_LOOP('',(#51974,#51975,#51976,#51977)); +#51974 = ORIENTED_EDGE('',*,*,#51908,.F.); +#51975 = ORIENTED_EDGE('',*,*,#51868,.F.); +#51976 = ORIENTED_EDGE('',*,*,#51775,.T.); +#51977 = ORIENTED_EDGE('',*,*,#51978,.T.); +#51978 = EDGE_CURVE('',#51778,#51909,#51979,.T.); +#51979 = LINE('',#51980,#51981); +#51980 = CARTESIAN_POINT('',(-1.255,-0.8,0.)); +#51981 = VECTOR('',#51982,1.); +#51982 = DIRECTION('',(0.,1.,0.)); +#51983 = PLANE('',#51984); +#51984 = AXIS2_PLACEMENT_3D('',#51985,#51986,#51987); +#51985 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#51986 = DIRECTION('',(0.,0.,1.)); +#51987 = DIRECTION('',(1.,0.,-0.)); +#51988 = ADVANCED_FACE('',(#51989),#52000,.T.); +#51989 = FACE_BOUND('',#51990,.T.); +#51990 = EDGE_LOOP('',(#51991,#51992,#51993,#51994)); +#51991 = ORIENTED_EDGE('',*,*,#51843,.T.); +#51992 = ORIENTED_EDGE('',*,*,#51978,.T.); +#51993 = ORIENTED_EDGE('',*,*,#51960,.F.); +#51994 = ORIENTED_EDGE('',*,*,#51995,.F.); +#51995 = EDGE_CURVE('',#51836,#51953,#51996,.T.); +#51996 = LINE('',#51997,#51998); +#51997 = CARTESIAN_POINT('',(-1.2,-0.8,5.5E-02)); +#51998 = VECTOR('',#51999,1.); +#51999 = DIRECTION('',(0.,1.,0.)); +#52000 = CYLINDRICAL_SURFACE('',#52001,5.5E-02); +#52001 = AXIS2_PLACEMENT_3D('',#52002,#52003,#52004); +#52002 = CARTESIAN_POINT('',(-1.255,-0.8,5.5E-02)); +#52003 = DIRECTION('',(0.,1.,0.)); +#52004 = DIRECTION('',(1.,0.,0.)); +#52005 = ADVANCED_FACE('',(#52006),#52049,.F.); +#52006 = FACE_BOUND('',#52007,.F.); +#52007 = EDGE_LOOP('',(#52008,#52009,#52010,#52011,#52019,#52027,#52035, + #52043)); +#52008 = ORIENTED_EDGE('',*,*,#51835,.F.); +#52009 = ORIENTED_EDGE('',*,*,#51827,.T.); +#52010 = ORIENTED_EDGE('',*,*,#51819,.T.); +#52011 = ORIENTED_EDGE('',*,*,#52012,.T.); +#52012 = EDGE_CURVE('',#51811,#52013,#52015,.T.); +#52013 = VERTEX_POINT('',#52014); +#52014 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52015 = LINE('',#52016,#52017); +#52016 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52017 = VECTOR('',#52018,1.); +#52018 = DIRECTION('',(1.,0.,0.)); +#52019 = ORIENTED_EDGE('',*,*,#52020,.T.); +#52020 = EDGE_CURVE('',#52013,#52021,#52023,.T.); +#52021 = VERTEX_POINT('',#52022); +#52022 = CARTESIAN_POINT('',(1.545,-0.8,0.495)); +#52023 = LINE('',#52024,#52025); +#52024 = CARTESIAN_POINT('',(-1.545,-0.8,0.495)); +#52025 = VECTOR('',#52026,1.); +#52026 = DIRECTION('',(1.,0.,0.)); +#52027 = ORIENTED_EDGE('',*,*,#52028,.F.); +#52028 = EDGE_CURVE('',#52029,#52021,#52031,.T.); +#52029 = VERTEX_POINT('',#52030); +#52030 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52031 = LINE('',#52032,#52033); +#52032 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52033 = VECTOR('',#52034,1.); +#52034 = DIRECTION('',(0.,0.,1.)); +#52035 = ORIENTED_EDGE('',*,*,#52036,.F.); +#52036 = EDGE_CURVE('',#52037,#52029,#52039,.T.); +#52037 = VERTEX_POINT('',#52038); +#52038 = CARTESIAN_POINT('',(1.2,-0.8,5.5E-02)); +#52039 = LINE('',#52040,#52041); +#52040 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52041 = VECTOR('',#52042,1.); +#52042 = DIRECTION('',(1.,0.,0.)); +#52043 = ORIENTED_EDGE('',*,*,#52044,.F.); +#52044 = EDGE_CURVE('',#51836,#52037,#52045,.T.); +#52045 = LINE('',#52046,#52047); +#52046 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52047 = VECTOR('',#52048,1.); +#52048 = DIRECTION('',(1.,0.,0.)); +#52049 = PLANE('',#52050); +#52050 = AXIS2_PLACEMENT_3D('',#52051,#52052,#52053); +#52051 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52052 = DIRECTION('',(0.,1.,0.)); +#52053 = DIRECTION('',(0.,-0.,1.)); +#52054 = ADVANCED_FACE('',(#52055),#52066,.T.); +#52055 = FACE_BOUND('',#52056,.T.); +#52056 = EDGE_LOOP('',(#52057,#52058,#52059,#52060)); +#52057 = ORIENTED_EDGE('',*,*,#51919,.F.); +#52058 = ORIENTED_EDGE('',*,*,#51884,.F.); +#52059 = ORIENTED_EDGE('',*,*,#51802,.T.); +#52060 = ORIENTED_EDGE('',*,*,#52061,.T.); +#52061 = EDGE_CURVE('',#51803,#51920,#52062,.T.); +#52062 = LINE('',#52063,#52064); +#52063 = CARTESIAN_POINT('',(-1.255,-0.8,0.55)); +#52064 = VECTOR('',#52065,1.); +#52065 = DIRECTION('',(0.,1.,0.)); +#52066 = PLANE('',#52067); +#52067 = AXIS2_PLACEMENT_3D('',#52068,#52069,#52070); +#52068 = CARTESIAN_POINT('',(-1.6,-0.8,0.55)); +#52069 = DIRECTION('',(0.,0.,1.)); +#52070 = DIRECTION('',(1.,0.,-0.)); +#52071 = ADVANCED_FACE('',(#52072),#52083,.T.); +#52072 = FACE_BOUND('',#52073,.T.); +#52073 = EDGE_LOOP('',(#52074,#52080,#52081,#52082)); +#52074 = ORIENTED_EDGE('',*,*,#52075,.T.); +#52075 = EDGE_CURVE('',#51811,#51928,#52076,.T.); +#52076 = LINE('',#52077,#52078); +#52077 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52078 = VECTOR('',#52079,1.); +#52079 = DIRECTION('',(0.,1.,0.)); +#52080 = ORIENTED_EDGE('',*,*,#51927,.T.); +#52081 = ORIENTED_EDGE('',*,*,#52061,.F.); +#52082 = ORIENTED_EDGE('',*,*,#51810,.F.); +#52083 = CYLINDRICAL_SURFACE('',#52084,5.5E-02); +#52084 = AXIS2_PLACEMENT_3D('',#52085,#52086,#52087); +#52085 = CARTESIAN_POINT('',(-1.255,-0.8,0.495)); +#52086 = DIRECTION('',(0.,1.,0.)); +#52087 = DIRECTION('',(1.,0.,0.)); +#52088 = ADVANCED_FACE('',(#52089),#52132,.T.); +#52089 = FACE_BOUND('',#52090,.T.); +#52090 = EDGE_LOOP('',(#52091,#52092,#52093,#52094,#52102,#52110,#52118, + #52126)); +#52091 = ORIENTED_EDGE('',*,*,#51952,.F.); +#52092 = ORIENTED_EDGE('',*,*,#51944,.T.); +#52093 = ORIENTED_EDGE('',*,*,#51936,.T.); +#52094 = ORIENTED_EDGE('',*,*,#52095,.T.); +#52095 = EDGE_CURVE('',#51928,#52096,#52098,.T.); +#52096 = VERTEX_POINT('',#52097); +#52097 = CARTESIAN_POINT('',(1.2,0.8,0.495)); +#52098 = LINE('',#52099,#52100); +#52099 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#52100 = VECTOR('',#52101,1.); +#52101 = DIRECTION('',(1.,0.,0.)); +#52102 = ORIENTED_EDGE('',*,*,#52103,.T.); +#52103 = EDGE_CURVE('',#52096,#52104,#52106,.T.); +#52104 = VERTEX_POINT('',#52105); +#52105 = CARTESIAN_POINT('',(1.545,0.8,0.495)); +#52106 = LINE('',#52107,#52108); +#52107 = CARTESIAN_POINT('',(-1.545,0.8,0.495)); +#52108 = VECTOR('',#52109,1.); +#52109 = DIRECTION('',(1.,0.,0.)); +#52110 = ORIENTED_EDGE('',*,*,#52111,.F.); +#52111 = EDGE_CURVE('',#52112,#52104,#52114,.T.); +#52112 = VERTEX_POINT('',#52113); +#52113 = CARTESIAN_POINT('',(1.545,0.8,5.5E-02)); +#52114 = LINE('',#52115,#52116); +#52115 = CARTESIAN_POINT('',(1.545,0.8,5.5E-02)); +#52116 = VECTOR('',#52117,1.); +#52117 = DIRECTION('',(0.,0.,1.)); +#52118 = ORIENTED_EDGE('',*,*,#52119,.F.); +#52119 = EDGE_CURVE('',#52120,#52112,#52122,.T.); +#52120 = VERTEX_POINT('',#52121); +#52121 = CARTESIAN_POINT('',(1.2,0.8,5.5E-02)); +#52122 = LINE('',#52123,#52124); +#52123 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#52124 = VECTOR('',#52125,1.); +#52125 = DIRECTION('',(1.,0.,0.)); +#52126 = ORIENTED_EDGE('',*,*,#52127,.F.); +#52127 = EDGE_CURVE('',#51953,#52120,#52128,.T.); +#52128 = LINE('',#52129,#52130); +#52129 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#52130 = VECTOR('',#52131,1.); +#52131 = DIRECTION('',(1.,0.,0.)); +#52132 = PLANE('',#52133); +#52133 = AXIS2_PLACEMENT_3D('',#52134,#52135,#52136); +#52134 = CARTESIAN_POINT('',(-1.545,0.8,5.5E-02)); +#52135 = DIRECTION('',(0.,1.,0.)); +#52136 = DIRECTION('',(0.,-0.,1.)); +#52137 = ADVANCED_FACE('',(#52138),#52149,.F.); +#52138 = FACE_BOUND('',#52139,.F.); +#52139 = EDGE_LOOP('',(#52140,#52141,#52142,#52148)); +#52140 = ORIENTED_EDGE('',*,*,#51995,.F.); +#52141 = ORIENTED_EDGE('',*,*,#52044,.T.); +#52142 = ORIENTED_EDGE('',*,*,#52143,.T.); +#52143 = EDGE_CURVE('',#52037,#52120,#52144,.T.); +#52144 = LINE('',#52145,#52146); +#52145 = CARTESIAN_POINT('',(1.2,-0.8,5.5E-02)); +#52146 = VECTOR('',#52147,1.); +#52147 = DIRECTION('',(0.,1.,0.)); +#52148 = ORIENTED_EDGE('',*,*,#52127,.F.); +#52149 = PLANE('',#52150); +#52150 = AXIS2_PLACEMENT_3D('',#52151,#52152,#52153); +#52151 = CARTESIAN_POINT('',(-1.545,-0.8,5.5E-02)); +#52152 = DIRECTION('',(0.,0.,1.)); +#52153 = DIRECTION('',(1.,0.,-0.)); +#52154 = ADVANCED_FACE('',(#52155),#52218,.F.); +#52155 = FACE_BOUND('',#52156,.F.); +#52156 = EDGE_LOOP('',(#52157,#52167,#52174,#52175,#52176,#52177,#52186, + #52194,#52203,#52211)); +#52157 = ORIENTED_EDGE('',*,*,#52158,.F.); +#52158 = EDGE_CURVE('',#52159,#52161,#52163,.T.); +#52159 = VERTEX_POINT('',#52160); +#52160 = CARTESIAN_POINT('',(1.255,-0.8,0.)); +#52161 = VERTEX_POINT('',#52162); +#52162 = CARTESIAN_POINT('',(1.545,-0.8,0.)); +#52163 = LINE('',#52164,#52165); +#52164 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#52165 = VECTOR('',#52166,1.); +#52166 = DIRECTION('',(1.,0.,0.)); +#52167 = ORIENTED_EDGE('',*,*,#52168,.F.); +#52168 = EDGE_CURVE('',#52037,#52159,#52169,.T.); +#52169 = CIRCLE('',#52170,5.5E-02); +#52170 = AXIS2_PLACEMENT_3D('',#52171,#52172,#52173); +#52171 = CARTESIAN_POINT('',(1.255,-0.8,5.5E-02)); +#52172 = DIRECTION('',(0.,-1.,0.)); +#52173 = DIRECTION('',(0.,0.,1.)); +#52174 = ORIENTED_EDGE('',*,*,#52036,.T.); +#52175 = ORIENTED_EDGE('',*,*,#52028,.T.); +#52176 = ORIENTED_EDGE('',*,*,#52020,.F.); +#52177 = ORIENTED_EDGE('',*,*,#52178,.T.); +#52178 = EDGE_CURVE('',#52013,#52179,#52181,.T.); +#52179 = VERTEX_POINT('',#52180); +#52180 = CARTESIAN_POINT('',(1.255,-0.8,0.55)); +#52181 = CIRCLE('',#52182,5.5E-02); +#52182 = AXIS2_PLACEMENT_3D('',#52183,#52184,#52185); +#52183 = CARTESIAN_POINT('',(1.255,-0.8,0.495)); +#52184 = DIRECTION('',(0.,1.,0.)); +#52185 = DIRECTION('',(0.,-0.,1.)); +#52186 = ORIENTED_EDGE('',*,*,#52187,.T.); +#52187 = EDGE_CURVE('',#52179,#52188,#52190,.T.); +#52188 = VERTEX_POINT('',#52189); +#52189 = CARTESIAN_POINT('',(1.545,-0.8,0.55)); +#52190 = LINE('',#52191,#52192); +#52191 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52192 = VECTOR('',#52193,1.); +#52193 = DIRECTION('',(1.,0.,0.)); +#52194 = ORIENTED_EDGE('',*,*,#52195,.F.); +#52195 = EDGE_CURVE('',#52196,#52188,#52198,.T.); +#52196 = VERTEX_POINT('',#52197); +#52197 = CARTESIAN_POINT('',(1.6,-0.8,0.495)); +#52198 = CIRCLE('',#52199,5.5E-02); +#52199 = AXIS2_PLACEMENT_3D('',#52200,#52201,#52202); +#52200 = CARTESIAN_POINT('',(1.545,-0.8,0.495)); +#52201 = DIRECTION('',(0.,-1.,0.)); +#52202 = DIRECTION('',(0.,0.,1.)); +#52203 = ORIENTED_EDGE('',*,*,#52204,.F.); +#52204 = EDGE_CURVE('',#52205,#52196,#52207,.T.); +#52205 = VERTEX_POINT('',#52206); +#52206 = CARTESIAN_POINT('',(1.6,-0.8,5.5E-02)); +#52207 = LINE('',#52208,#52209); +#52208 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#52209 = VECTOR('',#52210,1.); +#52210 = DIRECTION('',(0.,0.,1.)); +#52211 = ORIENTED_EDGE('',*,*,#52212,.T.); +#52212 = EDGE_CURVE('',#52205,#52161,#52213,.T.); +#52213 = CIRCLE('',#52214,5.5E-02); +#52214 = AXIS2_PLACEMENT_3D('',#52215,#52216,#52217); +#52215 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52216 = DIRECTION('',(0.,1.,0.)); +#52217 = DIRECTION('',(0.,-0.,1.)); +#52218 = PLANE('',#52219); +#52219 = AXIS2_PLACEMENT_3D('',#52220,#52221,#52222); +#52220 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#52221 = DIRECTION('',(0.,1.,0.)); +#52222 = DIRECTION('',(0.,-0.,1.)); +#52223 = ADVANCED_FACE('',(#52224),#52249,.F.); +#52224 = FACE_BOUND('',#52225,.F.); +#52225 = EDGE_LOOP('',(#52226,#52227,#52235,#52243)); +#52226 = ORIENTED_EDGE('',*,*,#52012,.F.); +#52227 = ORIENTED_EDGE('',*,*,#52228,.T.); +#52228 = EDGE_CURVE('',#51811,#52229,#52231,.T.); +#52229 = VERTEX_POINT('',#52230); +#52230 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52231 = LINE('',#52232,#52233); +#52232 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52233 = VECTOR('',#52234,1.); +#52234 = DIRECTION('',(0.,0.,1.)); +#52235 = ORIENTED_EDGE('',*,*,#52236,.T.); +#52236 = EDGE_CURVE('',#52229,#52237,#52239,.T.); +#52237 = VERTEX_POINT('',#52238); +#52238 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52239 = LINE('',#52240,#52241); +#52240 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52241 = VECTOR('',#52242,1.); +#52242 = DIRECTION('',(1.,0.,0.)); +#52243 = ORIENTED_EDGE('',*,*,#52244,.F.); +#52244 = EDGE_CURVE('',#52013,#52237,#52245,.T.); +#52245 = LINE('',#52246,#52247); +#52246 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52247 = VECTOR('',#52248,1.); +#52248 = DIRECTION('',(0.,0.,1.)); +#52249 = PLANE('',#52250); +#52250 = AXIS2_PLACEMENT_3D('',#52251,#52252,#52253); +#52251 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52252 = DIRECTION('',(0.,1.,0.)); +#52253 = DIRECTION('',(0.,-0.,1.)); +#52254 = ADVANCED_FACE('',(#52255),#52273,.F.); +#52255 = FACE_BOUND('',#52256,.F.); +#52256 = EDGE_LOOP('',(#52257,#52258,#52259,#52267)); +#52257 = ORIENTED_EDGE('',*,*,#52228,.F.); +#52258 = ORIENTED_EDGE('',*,*,#52075,.T.); +#52259 = ORIENTED_EDGE('',*,*,#52260,.T.); +#52260 = EDGE_CURVE('',#51928,#52261,#52263,.T.); +#52261 = VERTEX_POINT('',#52262); +#52262 = CARTESIAN_POINT('',(-1.2,0.8,0.55)); +#52263 = LINE('',#52264,#52265); +#52264 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#52265 = VECTOR('',#52266,1.); +#52266 = DIRECTION('',(0.,0.,1.)); +#52267 = ORIENTED_EDGE('',*,*,#52268,.F.); +#52268 = EDGE_CURVE('',#52229,#52261,#52269,.T.); +#52269 = LINE('',#52270,#52271); +#52270 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52271 = VECTOR('',#52272,1.); +#52272 = DIRECTION('',(0.,1.,0.)); +#52273 = PLANE('',#52274); +#52274 = AXIS2_PLACEMENT_3D('',#52275,#52276,#52277); +#52275 = CARTESIAN_POINT('',(-1.2,-0.8,0.495)); +#52276 = DIRECTION('',(1.,0.,0.)); +#52277 = DIRECTION('',(0.,0.,1.)); +#52278 = ADVANCED_FACE('',(#52279),#52342,.T.); +#52279 = FACE_BOUND('',#52280,.T.); +#52280 = EDGE_LOOP('',(#52281,#52291,#52298,#52299,#52300,#52301,#52310, + #52318,#52327,#52335)); +#52281 = ORIENTED_EDGE('',*,*,#52282,.F.); +#52282 = EDGE_CURVE('',#52283,#52285,#52287,.T.); +#52283 = VERTEX_POINT('',#52284); +#52284 = CARTESIAN_POINT('',(1.255,0.8,0.)); +#52285 = VERTEX_POINT('',#52286); +#52286 = CARTESIAN_POINT('',(1.545,0.8,0.)); +#52287 = LINE('',#52288,#52289); +#52288 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#52289 = VECTOR('',#52290,1.); +#52290 = DIRECTION('',(1.,0.,0.)); +#52291 = ORIENTED_EDGE('',*,*,#52292,.F.); +#52292 = EDGE_CURVE('',#52120,#52283,#52293,.T.); +#52293 = CIRCLE('',#52294,5.5E-02); +#52294 = AXIS2_PLACEMENT_3D('',#52295,#52296,#52297); +#52295 = CARTESIAN_POINT('',(1.255,0.8,5.5E-02)); +#52296 = DIRECTION('',(0.,-1.,0.)); +#52297 = DIRECTION('',(0.,0.,1.)); +#52298 = ORIENTED_EDGE('',*,*,#52119,.T.); +#52299 = ORIENTED_EDGE('',*,*,#52111,.T.); +#52300 = ORIENTED_EDGE('',*,*,#52103,.F.); +#52301 = ORIENTED_EDGE('',*,*,#52302,.T.); +#52302 = EDGE_CURVE('',#52096,#52303,#52305,.T.); +#52303 = VERTEX_POINT('',#52304); +#52304 = CARTESIAN_POINT('',(1.255,0.8,0.55)); +#52305 = CIRCLE('',#52306,5.5E-02); +#52306 = AXIS2_PLACEMENT_3D('',#52307,#52308,#52309); +#52307 = CARTESIAN_POINT('',(1.255,0.8,0.495)); +#52308 = DIRECTION('',(0.,1.,0.)); +#52309 = DIRECTION('',(0.,-0.,1.)); +#52310 = ORIENTED_EDGE('',*,*,#52311,.T.); +#52311 = EDGE_CURVE('',#52303,#52312,#52314,.T.); +#52312 = VERTEX_POINT('',#52313); +#52313 = CARTESIAN_POINT('',(1.545,0.8,0.55)); +#52314 = LINE('',#52315,#52316); +#52315 = CARTESIAN_POINT('',(1.2,0.8,0.55)); +#52316 = VECTOR('',#52317,1.); +#52317 = DIRECTION('',(1.,0.,0.)); +#52318 = ORIENTED_EDGE('',*,*,#52319,.F.); +#52319 = EDGE_CURVE('',#52320,#52312,#52322,.T.); +#52320 = VERTEX_POINT('',#52321); +#52321 = CARTESIAN_POINT('',(1.6,0.8,0.495)); +#52322 = CIRCLE('',#52323,5.5E-02); +#52323 = AXIS2_PLACEMENT_3D('',#52324,#52325,#52326); +#52324 = CARTESIAN_POINT('',(1.545,0.8,0.495)); +#52325 = DIRECTION('',(0.,-1.,0.)); +#52326 = DIRECTION('',(0.,0.,1.)); +#52327 = ORIENTED_EDGE('',*,*,#52328,.F.); +#52328 = EDGE_CURVE('',#52329,#52320,#52331,.T.); +#52329 = VERTEX_POINT('',#52330); +#52330 = CARTESIAN_POINT('',(1.6,0.8,5.5E-02)); +#52331 = LINE('',#52332,#52333); +#52332 = CARTESIAN_POINT('',(1.6,0.8,0.)); +#52333 = VECTOR('',#52334,1.); +#52334 = DIRECTION('',(0.,0.,1.)); +#52335 = ORIENTED_EDGE('',*,*,#52336,.T.); +#52336 = EDGE_CURVE('',#52329,#52285,#52337,.T.); +#52337 = CIRCLE('',#52338,5.5E-02); +#52338 = AXIS2_PLACEMENT_3D('',#52339,#52340,#52341); +#52339 = CARTESIAN_POINT('',(1.545,0.8,5.5E-02)); +#52340 = DIRECTION('',(0.,1.,0.)); +#52341 = DIRECTION('',(0.,-0.,1.)); +#52342 = PLANE('',#52343); +#52343 = AXIS2_PLACEMENT_3D('',#52344,#52345,#52346); +#52344 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#52345 = DIRECTION('',(0.,1.,0.)); +#52346 = DIRECTION('',(0.,-0.,1.)); +#52347 = ADVANCED_FACE('',(#52348),#52366,.T.); +#52348 = FACE_BOUND('',#52349,.T.); +#52349 = EDGE_LOOP('',(#52350,#52351,#52352,#52360)); +#52350 = ORIENTED_EDGE('',*,*,#52095,.F.); +#52351 = ORIENTED_EDGE('',*,*,#52260,.T.); +#52352 = ORIENTED_EDGE('',*,*,#52353,.T.); +#52353 = EDGE_CURVE('',#52261,#52354,#52356,.T.); +#52354 = VERTEX_POINT('',#52355); +#52355 = CARTESIAN_POINT('',(1.2,0.8,0.55)); +#52356 = LINE('',#52357,#52358); +#52357 = CARTESIAN_POINT('',(-1.2,0.8,0.55)); +#52358 = VECTOR('',#52359,1.); +#52359 = DIRECTION('',(1.,0.,0.)); +#52360 = ORIENTED_EDGE('',*,*,#52361,.F.); +#52361 = EDGE_CURVE('',#52096,#52354,#52362,.T.); +#52362 = LINE('',#52363,#52364); +#52363 = CARTESIAN_POINT('',(1.2,0.8,0.495)); +#52364 = VECTOR('',#52365,1.); +#52365 = DIRECTION('',(0.,0.,1.)); +#52366 = PLANE('',#52367); +#52367 = AXIS2_PLACEMENT_3D('',#52368,#52369,#52370); +#52368 = CARTESIAN_POINT('',(-1.2,0.8,0.495)); +#52369 = DIRECTION('',(0.,1.,0.)); +#52370 = DIRECTION('',(0.,-0.,1.)); +#52371 = ADVANCED_FACE('',(#52372),#52383,.T.); +#52372 = FACE_BOUND('',#52373,.T.); +#52373 = EDGE_LOOP('',(#52374,#52375,#52376,#52382)); +#52374 = ORIENTED_EDGE('',*,*,#52143,.T.); +#52375 = ORIENTED_EDGE('',*,*,#52292,.T.); +#52376 = ORIENTED_EDGE('',*,*,#52377,.F.); +#52377 = EDGE_CURVE('',#52159,#52283,#52378,.T.); +#52378 = LINE('',#52379,#52380); +#52379 = CARTESIAN_POINT('',(1.255,-0.8,0.)); +#52380 = VECTOR('',#52381,1.); +#52381 = DIRECTION('',(0.,1.,0.)); +#52382 = ORIENTED_EDGE('',*,*,#52168,.F.); +#52383 = CYLINDRICAL_SURFACE('',#52384,5.5E-02); +#52384 = AXIS2_PLACEMENT_3D('',#52385,#52386,#52387); +#52385 = CARTESIAN_POINT('',(1.255,-0.8,5.5E-02)); +#52386 = DIRECTION('',(0.,1.,0.)); +#52387 = DIRECTION('',(-1.,0.,0.)); +#52388 = ADVANCED_FACE('',(#52389),#52400,.F.); +#52389 = FACE_BOUND('',#52390,.F.); +#52390 = EDGE_LOOP('',(#52391,#52392,#52393,#52394)); +#52391 = ORIENTED_EDGE('',*,*,#52282,.F.); +#52392 = ORIENTED_EDGE('',*,*,#52377,.F.); +#52393 = ORIENTED_EDGE('',*,*,#52158,.T.); +#52394 = ORIENTED_EDGE('',*,*,#52395,.T.); +#52395 = EDGE_CURVE('',#52161,#52285,#52396,.T.); +#52396 = LINE('',#52397,#52398); +#52397 = CARTESIAN_POINT('',(1.545,-0.8,0.)); +#52398 = VECTOR('',#52399,1.); +#52399 = DIRECTION('',(0.,1.,0.)); +#52400 = PLANE('',#52401); +#52401 = AXIS2_PLACEMENT_3D('',#52402,#52403,#52404); +#52402 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#52403 = DIRECTION('',(0.,0.,1.)); +#52404 = DIRECTION('',(1.,0.,-0.)); +#52405 = ADVANCED_FACE('',(#52406),#52417,.T.); +#52406 = FACE_BOUND('',#52407,.T.); +#52407 = EDGE_LOOP('',(#52408,#52409,#52410,#52411)); +#52408 = ORIENTED_EDGE('',*,*,#52212,.T.); +#52409 = ORIENTED_EDGE('',*,*,#52395,.T.); +#52410 = ORIENTED_EDGE('',*,*,#52336,.F.); +#52411 = ORIENTED_EDGE('',*,*,#52412,.F.); +#52412 = EDGE_CURVE('',#52205,#52329,#52413,.T.); +#52413 = LINE('',#52414,#52415); +#52414 = CARTESIAN_POINT('',(1.6,-0.8,5.5E-02)); +#52415 = VECTOR('',#52416,1.); +#52416 = DIRECTION('',(0.,1.,0.)); +#52417 = CYLINDRICAL_SURFACE('',#52418,5.5E-02); +#52418 = AXIS2_PLACEMENT_3D('',#52419,#52420,#52421); +#52419 = CARTESIAN_POINT('',(1.545,-0.8,5.5E-02)); +#52420 = DIRECTION('',(0.,1.,0.)); +#52421 = DIRECTION('',(1.,0.,0.)); +#52422 = ADVANCED_FACE('',(#52423),#52434,.T.); +#52423 = FACE_BOUND('',#52424,.T.); +#52424 = EDGE_LOOP('',(#52425,#52426,#52427,#52428)); +#52425 = ORIENTED_EDGE('',*,*,#52204,.F.); +#52426 = ORIENTED_EDGE('',*,*,#52412,.T.); +#52427 = ORIENTED_EDGE('',*,*,#52328,.T.); +#52428 = ORIENTED_EDGE('',*,*,#52429,.F.); +#52429 = EDGE_CURVE('',#52196,#52320,#52430,.T.); +#52430 = LINE('',#52431,#52432); +#52431 = CARTESIAN_POINT('',(1.6,-0.8,0.495)); +#52432 = VECTOR('',#52433,1.); +#52433 = DIRECTION('',(0.,1.,0.)); +#52434 = PLANE('',#52435); +#52435 = AXIS2_PLACEMENT_3D('',#52436,#52437,#52438); +#52436 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#52437 = DIRECTION('',(1.,0.,0.)); +#52438 = DIRECTION('',(0.,0.,1.)); +#52439 = ADVANCED_FACE('',(#52440),#52451,.T.); +#52440 = FACE_BOUND('',#52441,.T.); +#52441 = EDGE_LOOP('',(#52442,#52443,#52444,#52450)); +#52442 = ORIENTED_EDGE('',*,*,#52429,.T.); +#52443 = ORIENTED_EDGE('',*,*,#52319,.T.); +#52444 = ORIENTED_EDGE('',*,*,#52445,.F.); +#52445 = EDGE_CURVE('',#52188,#52312,#52446,.T.); +#52446 = LINE('',#52447,#52448); +#52447 = CARTESIAN_POINT('',(1.545,-0.8,0.55)); +#52448 = VECTOR('',#52449,1.); +#52449 = DIRECTION('',(0.,1.,0.)); +#52450 = ORIENTED_EDGE('',*,*,#52195,.F.); +#52451 = CYLINDRICAL_SURFACE('',#52452,5.5E-02); +#52452 = AXIS2_PLACEMENT_3D('',#52453,#52454,#52455); +#52453 = CARTESIAN_POINT('',(1.545,-0.8,0.495)); +#52454 = DIRECTION('',(0.,1.,0.)); +#52455 = DIRECTION('',(1.,0.,0.)); +#52456 = ADVANCED_FACE('',(#52457),#52468,.T.); +#52457 = FACE_BOUND('',#52458,.T.); +#52458 = EDGE_LOOP('',(#52459,#52460,#52466,#52467)); +#52459 = ORIENTED_EDGE('',*,*,#52311,.F.); +#52460 = ORIENTED_EDGE('',*,*,#52461,.F.); +#52461 = EDGE_CURVE('',#52179,#52303,#52462,.T.); +#52462 = LINE('',#52463,#52464); +#52463 = CARTESIAN_POINT('',(1.255,-0.8,0.55)); +#52464 = VECTOR('',#52465,1.); +#52465 = DIRECTION('',(0.,1.,0.)); +#52466 = ORIENTED_EDGE('',*,*,#52187,.T.); +#52467 = ORIENTED_EDGE('',*,*,#52445,.T.); +#52468 = PLANE('',#52469); +#52469 = AXIS2_PLACEMENT_3D('',#52470,#52471,#52472); +#52470 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52471 = DIRECTION('',(0.,0.,1.)); +#52472 = DIRECTION('',(1.,0.,-0.)); +#52473 = ADVANCED_FACE('',(#52474),#52485,.T.); +#52474 = FACE_BOUND('',#52475,.T.); +#52475 = EDGE_LOOP('',(#52476,#52477,#52478,#52479)); +#52476 = ORIENTED_EDGE('',*,*,#52178,.T.); +#52477 = ORIENTED_EDGE('',*,*,#52461,.T.); +#52478 = ORIENTED_EDGE('',*,*,#52302,.F.); +#52479 = ORIENTED_EDGE('',*,*,#52480,.F.); +#52480 = EDGE_CURVE('',#52013,#52096,#52481,.T.); +#52481 = LINE('',#52482,#52483); +#52482 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52483 = VECTOR('',#52484,1.); +#52484 = DIRECTION('',(0.,1.,0.)); +#52485 = CYLINDRICAL_SURFACE('',#52486,5.5E-02); +#52486 = AXIS2_PLACEMENT_3D('',#52487,#52488,#52489); +#52487 = CARTESIAN_POINT('',(1.255,-0.8,0.495)); +#52488 = DIRECTION('',(0.,1.,0.)); +#52489 = DIRECTION('',(-1.,0.,0.)); +#52490 = ADVANCED_FACE('',(#52491),#52502,.T.); +#52491 = FACE_BOUND('',#52492,.T.); +#52492 = EDGE_LOOP('',(#52493,#52494,#52495,#52496)); +#52493 = ORIENTED_EDGE('',*,*,#52244,.F.); +#52494 = ORIENTED_EDGE('',*,*,#52480,.T.); +#52495 = ORIENTED_EDGE('',*,*,#52361,.T.); +#52496 = ORIENTED_EDGE('',*,*,#52497,.F.); +#52497 = EDGE_CURVE('',#52237,#52354,#52498,.T.); +#52498 = LINE('',#52499,#52500); +#52499 = CARTESIAN_POINT('',(1.2,-0.8,0.55)); +#52500 = VECTOR('',#52501,1.); +#52501 = DIRECTION('',(0.,1.,0.)); +#52502 = PLANE('',#52503); +#52503 = AXIS2_PLACEMENT_3D('',#52504,#52505,#52506); +#52504 = CARTESIAN_POINT('',(1.2,-0.8,0.495)); +#52505 = DIRECTION('',(1.,0.,0.)); +#52506 = DIRECTION('',(0.,0.,1.)); +#52507 = ADVANCED_FACE('',(#52508),#52514,.T.); +#52508 = FACE_BOUND('',#52509,.T.); +#52509 = EDGE_LOOP('',(#52510,#52511,#52512,#52513)); +#52510 = ORIENTED_EDGE('',*,*,#52268,.F.); +#52511 = ORIENTED_EDGE('',*,*,#52236,.T.); +#52512 = ORIENTED_EDGE('',*,*,#52497,.T.); +#52513 = ORIENTED_EDGE('',*,*,#52353,.F.); +#52514 = PLANE('',#52515); +#52515 = AXIS2_PLACEMENT_3D('',#52516,#52517,#52518); +#52516 = CARTESIAN_POINT('',(-1.2,-0.8,0.55)); +#52517 = DIRECTION('',(0.,0.,1.)); +#52518 = DIRECTION('',(1.,0.,-0.)); +#52519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#52523)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#52520,#52521,#52522)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#52520 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#52521 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#52522 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#52523 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#52520, + 'distance_accuracy_value','confusion accuracy'); +#52524 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52525,#52527); +#52525 = ( REPRESENTATION_RELATIONSHIP('','',#51728,#51705) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52526) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52526 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51706); +#52527 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52528); +#52528 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','=>[0:1:1:29]','',#51700, + #51723,$); +#52529 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#51725)); +#52530 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52531,#52533); +#52531 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52532) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52532 = ITEM_DEFINED_TRANSFORMATION('','',#11,#123); +#52533 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52534); +#52534 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','Cu3','',#5,#14742,$); +#52535 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52536,#52538); +#52536 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52537) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52537 = ITEM_DEFINED_TRANSFORMATION('','',#11,#127); +#52538 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52539); +#52539 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','R3','',#5,#523,$); +#52540 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52541,#52543); +#52541 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52542) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52542 = ITEM_DEFINED_TRANSFORMATION('','',#11,#131); +#52543 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52544); +#52544 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','R60','',#5,#523,$); +#52545 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52546,#52548); +#52546 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52547) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52547 = ITEM_DEFINED_TRANSFORMATION('','',#11,#135); +#52548 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52549); +#52549 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','Rdfu','',#5,#523,$); +#52550 = SHAPE_DEFINITION_REPRESENTATION(#52551,#52557); +#52551 = PRODUCT_DEFINITION_SHAPE('','',#52552); +#52552 = PRODUCT_DEFINITION('design','',#52553,#52556); +#52553 = PRODUCT_DEFINITION_FORMATION('','',#52554); +#52554 = PRODUCT('D_SMB','D_SMB','',(#52555)); +#52555 = PRODUCT_CONTEXT('',#2,'mechanical'); +#52556 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#52557 = SHAPE_REPRESENTATION('',(#11,#52558),#52562); +#52558 = AXIS2_PLACEMENT_3D('',#52559,#52560,#52561); +#52559 = CARTESIAN_POINT('',(0.,0.,0.)); +#52560 = DIRECTION('',(0.,0.,1.)); +#52561 = DIRECTION('',(1.,0.,-0.)); +#52562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#52566)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#52563,#52564,#52565)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#52563 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#52564 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#52565 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#52566 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#52563, + 'distance_accuracy_value','confusion accuracy'); +#52567 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#52568,#52570); +#52568 = ( REPRESENTATION_RELATIONSHIP('','',#52557,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52569) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#52569 = ITEM_DEFINED_TRANSFORMATION('','',#11,#139); +#52570 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #52571); +#52571 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','D10','',#5,#52552,$); +#52572 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#52554)); +#52573 = SHAPE_DEFINITION_REPRESENTATION(#52574,#52580); +#52574 = PRODUCT_DEFINITION_SHAPE('','',#52575); +#52575 = PRODUCT_DEFINITION('design','',#52576,#52579); +#52576 = PRODUCT_DEFINITION_FORMATION('','',#52577); +#52577 = PRODUCT('D_SMB','D_SMB','',(#52578)); +#52578 = PRODUCT_CONTEXT('',#2,'mechanical'); +#52579 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#52580 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#52581),#53789); +#52581 = MANIFOLD_SOLID_BREP('',#52582); +#52582 = CLOSED_SHELL('',(#52583,#52623,#52706,#52731,#52806,#52823, + #52840,#52857,#52874,#52891,#52907,#52954,#52989,#53028,#53057, + #53096,#53125,#53179,#53222,#53245,#53268,#53291,#53342,#53365, + #53382,#53456,#53480,#53547,#53559,#53571,#53588,#53617,#53640, + #53663,#53680,#53702,#53714,#53731,#53748,#53765,#53777)); +#52583 = ADVANCED_FACE('',(#52584),#52618,.T.); +#52584 = FACE_BOUND('',#52585,.T.); +#52585 = EDGE_LOOP('',(#52586,#52596,#52604,#52612)); +#52586 = ORIENTED_EDGE('',*,*,#52587,.T.); +#52587 = EDGE_CURVE('',#52588,#52590,#52592,.T.); +#52588 = VERTEX_POINT('',#52589); +#52589 = CARTESIAN_POINT('',(1.4,1.,0.)); +#52590 = VERTEX_POINT('',#52591); +#52591 = CARTESIAN_POINT('',(2.503333333333,1.,-2.775557561563E-17)); +#52592 = LINE('',#52593,#52594); +#52593 = CARTESIAN_POINT('',(2.43,1.,0.)); +#52594 = VECTOR('',#52595,1.); +#52595 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52596 = ORIENTED_EDGE('',*,*,#52597,.T.); +#52597 = EDGE_CURVE('',#52590,#52598,#52600,.T.); +#52598 = VERTEX_POINT('',#52599); +#52599 = CARTESIAN_POINT('',(2.503333333333,-1.,-2.775557561563E-17)); +#52600 = LINE('',#52601,#52602); +#52601 = CARTESIAN_POINT('',(2.503333333333,1.,-2.775557561563E-17)); +#52602 = VECTOR('',#52603,1.); +#52603 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52604 = ORIENTED_EDGE('',*,*,#52605,.T.); +#52605 = EDGE_CURVE('',#52598,#52606,#52608,.T.); +#52606 = VERTEX_POINT('',#52607); +#52607 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52608 = LINE('',#52609,#52610); +#52609 = CARTESIAN_POINT('',(2.43,-1.,0.)); +#52610 = VECTOR('',#52611,1.); +#52611 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52612 = ORIENTED_EDGE('',*,*,#52613,.T.); +#52613 = EDGE_CURVE('',#52606,#52588,#52614,.T.); +#52614 = LINE('',#52615,#52616); +#52615 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52616 = VECTOR('',#52617,1.); +#52617 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52618 = PLANE('',#52619); +#52619 = AXIS2_PLACEMENT_3D('',#52620,#52621,#52622); +#52620 = CARTESIAN_POINT('',(1.951666666667,-6.30120533068E-16, + -8.943794505573E-18)); +#52621 = DIRECTION('',(-1.696061518107E-17,5.165776572619E-33,-1.)); +#52622 = DIRECTION('',(1.,-2.22044604925E-16,-1.696061518107E-17)); +#52623 = ADVANCED_FACE('',(#52624),#52701,.T.); +#52624 = FACE_BOUND('',#52625,.T.); +#52625 = EDGE_LOOP('',(#52626,#52636,#52643,#52644,#52652,#52660,#52670, + #52678,#52686,#52694)); +#52626 = ORIENTED_EDGE('',*,*,#52627,.F.); +#52627 = EDGE_CURVE('',#52628,#52630,#52632,.T.); +#52628 = VERTEX_POINT('',#52629); +#52629 = CARTESIAN_POINT('',(2.65,1.,0.146666666667)); +#52630 = VERTEX_POINT('',#52631); +#52631 = CARTESIAN_POINT('',(2.65,1.,0.811158333333)); +#52632 = LINE('',#52633,#52634); +#52633 = CARTESIAN_POINT('',(2.65,1.,0.)); +#52634 = VECTOR('',#52635,1.); +#52635 = DIRECTION('',(0.,0.,1.)); +#52636 = ORIENTED_EDGE('',*,*,#52637,.T.); +#52637 = EDGE_CURVE('',#52628,#52590,#52638,.T.); +#52638 = CIRCLE('',#52639,0.146666666667); +#52639 = AXIS2_PLACEMENT_3D('',#52640,#52641,#52642); +#52640 = CARTESIAN_POINT('',(2.503333333333,1.,0.146666666667)); +#52641 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#52642 = DIRECTION('',(0.,0.,1.)); +#52643 = ORIENTED_EDGE('',*,*,#52587,.F.); +#52644 = ORIENTED_EDGE('',*,*,#52645,.T.); +#52645 = EDGE_CURVE('',#52588,#52646,#52648,.T.); +#52646 = VERTEX_POINT('',#52647); +#52647 = CARTESIAN_POINT('',(1.4,1.,0.22)); +#52648 = LINE('',#52649,#52650); +#52649 = CARTESIAN_POINT('',(1.4,1.,0.)); +#52650 = VECTOR('',#52651,1.); +#52651 = DIRECTION('',(0.,0.,1.)); +#52652 = ORIENTED_EDGE('',*,*,#52653,.F.); +#52653 = EDGE_CURVE('',#52654,#52646,#52656,.T.); +#52654 = VERTEX_POINT('',#52655); +#52655 = CARTESIAN_POINT('',(2.37747286303,1.,0.22)); +#52656 = LINE('',#52657,#52658); +#52657 = CARTESIAN_POINT('',(2.279656881469,1.,0.22)); +#52658 = VECTOR('',#52659,1.); +#52659 = DIRECTION('',(-1.,3.208039609213E-16,0.)); +#52660 = ORIENTED_EDGE('',*,*,#52661,.T.); +#52661 = EDGE_CURVE('',#52654,#52662,#52664,.T.); +#52662 = VERTEX_POINT('',#52663); +#52663 = CARTESIAN_POINT('',(2.377627457948,1.,0.2222)); +#52664 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#52665,#52666,#52667,#52668, + #52669),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52665 = CARTESIAN_POINT('',(2.37747286303,1.,0.22)); +#52666 = CARTESIAN_POINT('',(2.390434471179,1.,0.40445326836)); +#52667 = CARTESIAN_POINT('',(2.403396226036,1.,0.588908624477)); +#52668 = CARTESIAN_POINT('',(2.416358116612,1.,0.773365911976)); +#52669 = CARTESIAN_POINT('',(2.429320133712,1.,0.957825)); +#52670 = ORIENTED_EDGE('',*,*,#52671,.T.); +#52671 = EDGE_CURVE('',#52662,#52672,#52674,.T.); +#52672 = VERTEX_POINT('',#52673); +#52673 = CARTESIAN_POINT('',(2.43,1.,0.2222)); +#52674 = LINE('',#52675,#52676); +#52675 = CARTESIAN_POINT('',(1.4,1.,0.2222)); +#52676 = VECTOR('',#52677,1.); +#52677 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52678 = ORIENTED_EDGE('',*,*,#52679,.T.); +#52679 = EDGE_CURVE('',#52672,#52680,#52682,.T.); +#52680 = VERTEX_POINT('',#52681); +#52681 = CARTESIAN_POINT('',(2.43,1.,0.957825)); +#52682 = LINE('',#52683,#52684); +#52683 = CARTESIAN_POINT('',(2.43,1.,0.)); +#52684 = VECTOR('',#52685,1.); +#52685 = DIRECTION('',(0.,0.,1.)); +#52686 = ORIENTED_EDGE('',*,*,#52687,.T.); +#52687 = EDGE_CURVE('',#52680,#52688,#52690,.T.); +#52688 = VERTEX_POINT('',#52689); +#52689 = CARTESIAN_POINT('',(2.503333333333,1.,0.957825)); +#52690 = LINE('',#52691,#52692); +#52691 = CARTESIAN_POINT('',(2.43,1.,0.957825)); +#52692 = VECTOR('',#52693,1.); +#52693 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52694 = ORIENTED_EDGE('',*,*,#52695,.F.); +#52695 = EDGE_CURVE('',#52630,#52688,#52696,.T.); +#52696 = CIRCLE('',#52697,0.146666666667); +#52697 = AXIS2_PLACEMENT_3D('',#52698,#52699,#52700); +#52698 = CARTESIAN_POINT('',(2.503333333333,1.,0.811158333333)); +#52699 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52700 = DIRECTION('',(0.,0.,1.)); +#52701 = PLANE('',#52702); +#52702 = AXIS2_PLACEMENT_3D('',#52703,#52704,#52705); +#52703 = CARTESIAN_POINT('',(2.181840899909,1.,0.302067385793)); +#52704 = DIRECTION('',(3.208039609213E-16,1.,-3.455687485119E-18)); +#52705 = DIRECTION('',(-1.,3.208039609213E-16,5.860333545794E-50)); +#52706 = ADVANCED_FACE('',(#52707),#52726,.T.); +#52707 = FACE_BOUND('',#52708,.T.); +#52708 = EDGE_LOOP('',(#52709,#52717,#52724,#52725)); +#52709 = ORIENTED_EDGE('',*,*,#52710,.T.); +#52710 = EDGE_CURVE('',#52628,#52711,#52713,.T.); +#52711 = VERTEX_POINT('',#52712); +#52712 = CARTESIAN_POINT('',(2.65,-1.,0.146666666667)); +#52713 = LINE('',#52714,#52715); +#52714 = CARTESIAN_POINT('',(2.65,1.,0.146666666667)); +#52715 = VECTOR('',#52716,1.); +#52716 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52717 = ORIENTED_EDGE('',*,*,#52718,.T.); +#52718 = EDGE_CURVE('',#52711,#52598,#52719,.T.); +#52719 = CIRCLE('',#52720,0.146666666667); +#52720 = AXIS2_PLACEMENT_3D('',#52721,#52722,#52723); +#52721 = CARTESIAN_POINT('',(2.503333333333,-1.,0.146666666667)); +#52722 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#52723 = DIRECTION('',(0.,0.,1.)); +#52724 = ORIENTED_EDGE('',*,*,#52597,.F.); +#52725 = ORIENTED_EDGE('',*,*,#52637,.F.); +#52726 = CYLINDRICAL_SURFACE('',#52727,0.146666666667); +#52727 = AXIS2_PLACEMENT_3D('',#52728,#52729,#52730); +#52728 = CARTESIAN_POINT('',(2.503333333333,1.,0.146666666667)); +#52729 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52730 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52731 = ADVANCED_FACE('',(#52732),#52801,.T.); +#52732 = FACE_BOUND('',#52733,.T.); +#52733 = EDGE_LOOP('',(#52734,#52735,#52743,#52752,#52760,#52768,#52776, + #52786,#52794,#52800)); +#52734 = ORIENTED_EDGE('',*,*,#52718,.F.); +#52735 = ORIENTED_EDGE('',*,*,#52736,.T.); +#52736 = EDGE_CURVE('',#52711,#52737,#52739,.T.); +#52737 = VERTEX_POINT('',#52738); +#52738 = CARTESIAN_POINT('',(2.65,-1.,0.811158333333)); +#52739 = LINE('',#52740,#52741); +#52740 = CARTESIAN_POINT('',(2.65,-1.,0.)); +#52741 = VECTOR('',#52742,1.); +#52742 = DIRECTION('',(0.,0.,1.)); +#52743 = ORIENTED_EDGE('',*,*,#52744,.T.); +#52744 = EDGE_CURVE('',#52737,#52745,#52747,.T.); +#52745 = VERTEX_POINT('',#52746); +#52746 = CARTESIAN_POINT('',(2.503333333333,-1.,0.957825)); +#52747 = CIRCLE('',#52748,0.146666666667); +#52748 = AXIS2_PLACEMENT_3D('',#52749,#52750,#52751); +#52749 = CARTESIAN_POINT('',(2.503333333333,-1.,0.811158333333)); +#52750 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52751 = DIRECTION('',(0.,0.,1.)); +#52752 = ORIENTED_EDGE('',*,*,#52753,.T.); +#52753 = EDGE_CURVE('',#52745,#52754,#52756,.T.); +#52754 = VERTEX_POINT('',#52755); +#52755 = CARTESIAN_POINT('',(2.43,-1.,0.957825)); +#52756 = LINE('',#52757,#52758); +#52757 = CARTESIAN_POINT('',(2.65,-1.,0.957825)); +#52758 = VECTOR('',#52759,1.); +#52759 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52760 = ORIENTED_EDGE('',*,*,#52761,.F.); +#52761 = EDGE_CURVE('',#52762,#52754,#52764,.T.); +#52762 = VERTEX_POINT('',#52763); +#52763 = CARTESIAN_POINT('',(2.43,-1.,0.2222)); +#52764 = LINE('',#52765,#52766); +#52765 = CARTESIAN_POINT('',(2.43,-1.,0.)); +#52766 = VECTOR('',#52767,1.); +#52767 = DIRECTION('',(0.,0.,1.)); +#52768 = ORIENTED_EDGE('',*,*,#52769,.T.); +#52769 = EDGE_CURVE('',#52762,#52770,#52772,.T.); +#52770 = VERTEX_POINT('',#52771); +#52771 = CARTESIAN_POINT('',(2.377627457948,-1.,0.2222)); +#52772 = LINE('',#52773,#52774); +#52773 = CARTESIAN_POINT('',(2.43,-1.,0.2222)); +#52774 = VECTOR('',#52775,1.); +#52775 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52776 = ORIENTED_EDGE('',*,*,#52777,.F.); +#52777 = EDGE_CURVE('',#52778,#52770,#52780,.T.); +#52778 = VERTEX_POINT('',#52779); +#52779 = CARTESIAN_POINT('',(2.37747286303,-1.,0.22)); +#52780 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#52781,#52782,#52783,#52784, + #52785),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52781 = CARTESIAN_POINT('',(2.37747286303,-1.,0.22)); +#52782 = CARTESIAN_POINT('',(2.390434471179,-1.,0.40445326836)); +#52783 = CARTESIAN_POINT('',(2.403396226036,-1.,0.588908624477)); +#52784 = CARTESIAN_POINT('',(2.416358116612,-1.,0.773365911976)); +#52785 = CARTESIAN_POINT('',(2.429320133712,-1.,0.957825)); +#52786 = ORIENTED_EDGE('',*,*,#52787,.F.); +#52787 = EDGE_CURVE('',#52788,#52778,#52790,.T.); +#52788 = VERTEX_POINT('',#52789); +#52789 = CARTESIAN_POINT('',(1.4,-1.,0.22)); +#52790 = LINE('',#52791,#52792); +#52791 = CARTESIAN_POINT('',(2.279656881469,-1.,0.22)); +#52792 = VECTOR('',#52793,1.); +#52793 = DIRECTION('',(1.,-5.837911398703E-16,-0.)); +#52794 = ORIENTED_EDGE('',*,*,#52795,.F.); +#52795 = EDGE_CURVE('',#52606,#52788,#52796,.T.); +#52796 = LINE('',#52797,#52798); +#52797 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52798 = VECTOR('',#52799,1.); +#52799 = DIRECTION('',(0.,0.,1.)); +#52800 = ORIENTED_EDGE('',*,*,#52605,.F.); +#52801 = PLANE('',#52802); +#52802 = AXIS2_PLACEMENT_3D('',#52803,#52804,#52805); +#52803 = CARTESIAN_POINT('',(2.181840899909,-1.,0.302067385793)); +#52804 = DIRECTION('',(-5.837911398703E-16,-1.,3.048681254865E-17)); +#52805 = DIRECTION('',(1.,-5.837911398703E-16,1.10819467531E-48)); +#52806 = ADVANCED_FACE('',(#52807),#52818,.T.); +#52807 = FACE_BOUND('',#52808,.T.); +#52808 = EDGE_LOOP('',(#52809,#52810,#52811,#52817)); +#52809 = ORIENTED_EDGE('',*,*,#52613,.F.); +#52810 = ORIENTED_EDGE('',*,*,#52795,.T.); +#52811 = ORIENTED_EDGE('',*,*,#52812,.F.); +#52812 = EDGE_CURVE('',#52646,#52788,#52813,.T.); +#52813 = LINE('',#52814,#52815); +#52814 = CARTESIAN_POINT('',(1.4,-1.361236431515,0.22)); +#52815 = VECTOR('',#52816,1.); +#52816 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52817 = ORIENTED_EDGE('',*,*,#52645,.F.); +#52818 = PLANE('',#52819); +#52819 = AXIS2_PLACEMENT_3D('',#52820,#52821,#52822); +#52820 = CARTESIAN_POINT('',(1.4,-1.,0.)); +#52821 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52822 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52823 = ADVANCED_FACE('',(#52824),#52835,.T.); +#52824 = FACE_BOUND('',#52825,.T.); +#52825 = EDGE_LOOP('',(#52826,#52827,#52833,#52834)); +#52826 = ORIENTED_EDGE('',*,*,#52627,.T.); +#52827 = ORIENTED_EDGE('',*,*,#52828,.T.); +#52828 = EDGE_CURVE('',#52630,#52737,#52829,.T.); +#52829 = LINE('',#52830,#52831); +#52830 = CARTESIAN_POINT('',(2.65,1.,0.811158333333)); +#52831 = VECTOR('',#52832,1.); +#52832 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52833 = ORIENTED_EDGE('',*,*,#52736,.F.); +#52834 = ORIENTED_EDGE('',*,*,#52710,.F.); +#52835 = PLANE('',#52836); +#52836 = AXIS2_PLACEMENT_3D('',#52837,#52838,#52839); +#52837 = CARTESIAN_POINT('',(2.65,1.,0.)); +#52838 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52839 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52840 = ADVANCED_FACE('',(#52841),#52852,.T.); +#52841 = FACE_BOUND('',#52842,.T.); +#52842 = EDGE_LOOP('',(#52843,#52844,#52850,#52851)); +#52843 = ORIENTED_EDGE('',*,*,#52695,.T.); +#52844 = ORIENTED_EDGE('',*,*,#52845,.T.); +#52845 = EDGE_CURVE('',#52688,#52745,#52846,.T.); +#52846 = LINE('',#52847,#52848); +#52847 = CARTESIAN_POINT('',(2.503333333333,1.,0.957825)); +#52848 = VECTOR('',#52849,1.); +#52849 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52850 = ORIENTED_EDGE('',*,*,#52744,.F.); +#52851 = ORIENTED_EDGE('',*,*,#52828,.F.); +#52852 = CYLINDRICAL_SURFACE('',#52853,0.146666666667); +#52853 = AXIS2_PLACEMENT_3D('',#52854,#52855,#52856); +#52854 = CARTESIAN_POINT('',(2.503333333333,1.,0.811158333333)); +#52855 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52856 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#52857 = ADVANCED_FACE('',(#52858),#52869,.F.); +#52858 = FACE_BOUND('',#52859,.F.); +#52859 = EDGE_LOOP('',(#52860,#52861,#52862,#52863)); +#52860 = ORIENTED_EDGE('',*,*,#52687,.T.); +#52861 = ORIENTED_EDGE('',*,*,#52845,.T.); +#52862 = ORIENTED_EDGE('',*,*,#52753,.T.); +#52863 = ORIENTED_EDGE('',*,*,#52864,.T.); +#52864 = EDGE_CURVE('',#52754,#52680,#52865,.T.); +#52865 = LINE('',#52866,#52867); +#52866 = CARTESIAN_POINT('',(2.43,-1.,0.957825)); +#52867 = VECTOR('',#52868,1.); +#52868 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52869 = PLANE('',#52870); +#52870 = AXIS2_PLACEMENT_3D('',#52871,#52872,#52873); +#52871 = CARTESIAN_POINT('',(2.54,-8.881784197001E-16,0.957825)); +#52872 = DIRECTION('',(0.,0.,-1.)); +#52873 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52874 = ADVANCED_FACE('',(#52875),#52886,.T.); +#52875 = FACE_BOUND('',#52876,.T.); +#52876 = EDGE_LOOP('',(#52877,#52883,#52884,#52885)); +#52877 = ORIENTED_EDGE('',*,*,#52878,.T.); +#52878 = EDGE_CURVE('',#52672,#52762,#52879,.T.); +#52879 = LINE('',#52880,#52881); +#52880 = CARTESIAN_POINT('',(2.43,1.,0.2222)); +#52881 = VECTOR('',#52882,1.); +#52882 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#52883 = ORIENTED_EDGE('',*,*,#52761,.T.); +#52884 = ORIENTED_EDGE('',*,*,#52864,.T.); +#52885 = ORIENTED_EDGE('',*,*,#52679,.F.); +#52886 = PLANE('',#52887); +#52887 = AXIS2_PLACEMENT_3D('',#52888,#52889,#52890); +#52888 = CARTESIAN_POINT('',(2.43,-1.,0.)); +#52889 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#52890 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52891 = ADVANCED_FACE('',(#52892),#52902,.F.); +#52892 = FACE_BOUND('',#52893,.F.); +#52893 = EDGE_LOOP('',(#52894,#52899,#52900,#52901)); +#52894 = ORIENTED_EDGE('',*,*,#52895,.F.); +#52895 = EDGE_CURVE('',#52662,#52770,#52896,.T.); +#52896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52897,#52898),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52897 = CARTESIAN_POINT('',(2.377627457948,1.,0.2222)); +#52898 = CARTESIAN_POINT('',(2.377627457948,-1.,0.2222)); +#52899 = ORIENTED_EDGE('',*,*,#52671,.T.); +#52900 = ORIENTED_EDGE('',*,*,#52878,.T.); +#52901 = ORIENTED_EDGE('',*,*,#52769,.T.); +#52902 = PLANE('',#52903); +#52903 = AXIS2_PLACEMENT_3D('',#52904,#52905,#52906); +#52904 = CARTESIAN_POINT('',(1.915,-6.661338147751E-16,0.2222)); +#52905 = DIRECTION('',(0.,0.,-1.)); +#52906 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#52907 = ADVANCED_FACE('',(#52908),#52949,.T.); +#52908 = FACE_BOUND('',#52909,.T.); +#52909 = EDGE_LOOP('',(#52910,#52919,#52925,#52926,#52927,#52928,#52936, + #52943)); +#52910 = ORIENTED_EDGE('',*,*,#52911,.F.); +#52911 = EDGE_CURVE('',#52912,#52914,#52916,.T.); +#52912 = VERTEX_POINT('',#52913); +#52913 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52914 = VERTEX_POINT('',#52915); +#52915 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52916 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52917,#52918),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52917 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52918 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52919 = ORIENTED_EDGE('',*,*,#52920,.T.); +#52920 = EDGE_CURVE('',#52912,#52778,#52921,.T.); +#52921 = LINE('',#52922,#52923); +#52922 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52923 = VECTOR('',#52924,1.); +#52924 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52925 = ORIENTED_EDGE('',*,*,#52777,.T.); +#52926 = ORIENTED_EDGE('',*,*,#52895,.F.); +#52927 = ORIENTED_EDGE('',*,*,#52661,.F.); +#52928 = ORIENTED_EDGE('',*,*,#52929,.T.); +#52929 = EDGE_CURVE('',#52654,#52930,#52932,.T.); +#52930 = VERTEX_POINT('',#52931); +#52931 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52932 = LINE('',#52933,#52934); +#52933 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52934 = VECTOR('',#52935,1.); +#52935 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52936 = ORIENTED_EDGE('',*,*,#52937,.T.); +#52937 = EDGE_CURVE('',#52930,#52938,#52940,.T.); +#52938 = VERTEX_POINT('',#52939); +#52939 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#52940 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52941,#52942),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52941 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52942 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#52943 = ORIENTED_EDGE('',*,*,#52944,.F.); +#52944 = EDGE_CURVE('',#52914,#52938,#52945,.T.); +#52945 = LINE('',#52946,#52947); +#52946 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52947 = VECTOR('',#52948,1.); +#52948 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52949 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#52950,#52951) + ,(#52952,#52953 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52950 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52951 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#52952 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52953 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#52954 = ADVANCED_FACE('',(#52955),#52984,.T.); +#52955 = FACE_BOUND('',#52956,.T.); +#52956 = EDGE_LOOP('',(#52957,#52958,#52966,#52974,#52980,#52981,#52982, + #52983)); +#52957 = ORIENTED_EDGE('',*,*,#52920,.F.); +#52958 = ORIENTED_EDGE('',*,*,#52959,.F.); +#52959 = EDGE_CURVE('',#52960,#52912,#52962,.T.); +#52960 = VERTEX_POINT('',#52961); +#52961 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#52962 = LINE('',#52963,#52964); +#52963 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#52964 = VECTOR('',#52965,1.); +#52965 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#52966 = ORIENTED_EDGE('',*,*,#52967,.T.); +#52967 = EDGE_CURVE('',#52960,#52968,#52970,.T.); +#52968 = VERTEX_POINT('',#52969); +#52969 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#52970 = LINE('',#52971,#52972); +#52971 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#52972 = VECTOR('',#52973,1.); +#52973 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#52974 = ORIENTED_EDGE('',*,*,#52975,.F.); +#52975 = EDGE_CURVE('',#52930,#52968,#52976,.T.); +#52976 = LINE('',#52977,#52978); +#52977 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#52978 = VECTOR('',#52979,1.); +#52979 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#52980 = ORIENTED_EDGE('',*,*,#52929,.F.); +#52981 = ORIENTED_EDGE('',*,*,#52653,.T.); +#52982 = ORIENTED_EDGE('',*,*,#52812,.T.); +#52983 = ORIENTED_EDGE('',*,*,#52787,.T.); +#52984 = PLANE('',#52985); +#52985 = AXIS2_PLACEMENT_3D('',#52986,#52987,#52988); +#52986 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#52987 = DIRECTION('',(0.,0.,-1.)); +#52988 = DIRECTION('',(-0.809803822742,0.586700748825,0.)); +#52989 = ADVANCED_FACE('',(#52990),#53023,.T.); +#52990 = FACE_BOUND('',#52991,.T.); +#52991 = EDGE_LOOP('',(#52992,#53002,#53008,#53009,#53010,#53018)); +#52992 = ORIENTED_EDGE('',*,*,#52993,.T.); +#52993 = EDGE_CURVE('',#52994,#52996,#52998,.T.); +#52994 = VERTEX_POINT('',#52995); +#52995 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#52996 = VERTEX_POINT('',#52997); +#52997 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#52998 = LINE('',#52999,#53000); +#52999 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53000 = VECTOR('',#53001,1.); +#53001 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53002 = ORIENTED_EDGE('',*,*,#53003,.T.); +#53003 = EDGE_CURVE('',#52996,#52960,#53004,.T.); +#53004 = LINE('',#53005,#53006); +#53005 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53006 = VECTOR('',#53007,1.); +#53007 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53008 = ORIENTED_EDGE('',*,*,#52959,.T.); +#53009 = ORIENTED_EDGE('',*,*,#52911,.T.); +#53010 = ORIENTED_EDGE('',*,*,#53011,.F.); +#53011 = EDGE_CURVE('',#53012,#52914,#53014,.T.); +#53012 = VERTEX_POINT('',#53013); +#53013 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53014 = LINE('',#53015,#53016); +#53015 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53016 = VECTOR('',#53017,1.); +#53017 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53018 = ORIENTED_EDGE('',*,*,#53019,.F.); +#53019 = EDGE_CURVE('',#52994,#53012,#53020,.T.); +#53020 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53021,#53022),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53021 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53022 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53023 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53024,#53025) + ,(#53026,#53027 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53024 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53025 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53026 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#53027 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53028 = ADVANCED_FACE('',(#53029),#53052,.T.); +#53029 = FACE_BOUND('',#53030,.T.); +#53030 = EDGE_LOOP('',(#53031,#53032,#53039,#53047)); +#53031 = ORIENTED_EDGE('',*,*,#52944,.T.); +#53032 = ORIENTED_EDGE('',*,*,#53033,.T.); +#53033 = EDGE_CURVE('',#52938,#53034,#53036,.T.); +#53034 = VERTEX_POINT('',#53035); +#53035 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53036 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53037,#53038),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53037 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53038 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53039 = ORIENTED_EDGE('',*,*,#53040,.F.); +#53040 = EDGE_CURVE('',#53041,#53034,#53043,.T.); +#53041 = VERTEX_POINT('',#53042); +#53042 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53043 = LINE('',#53044,#53045); +#53044 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53045 = VECTOR('',#53046,1.); +#53046 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53047 = ORIENTED_EDGE('',*,*,#53048,.F.); +#53048 = EDGE_CURVE('',#52914,#53041,#53049,.T.); +#53049 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53050,#53051),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53050 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53051 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53052 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53053,#53054) + ,(#53055,#53056 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53053 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53054 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53055 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53056 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53057 = ADVANCED_FACE('',(#53058),#53091,.T.); +#53058 = FACE_BOUND('',#53059,.T.); +#53059 = EDGE_LOOP('',(#53060,#53061,#53069,#53077,#53084,#53090)); +#53060 = ORIENTED_EDGE('',*,*,#52975,.T.); +#53061 = ORIENTED_EDGE('',*,*,#53062,.T.); +#53062 = EDGE_CURVE('',#52968,#53063,#53065,.T.); +#53063 = VERTEX_POINT('',#53064); +#53064 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53065 = LINE('',#53066,#53067); +#53066 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53067 = VECTOR('',#53068,1.); +#53068 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53069 = ORIENTED_EDGE('',*,*,#53070,.T.); +#53070 = EDGE_CURVE('',#53063,#53071,#53073,.T.); +#53071 = VERTEX_POINT('',#53072); +#53072 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53073 = LINE('',#53074,#53075); +#53074 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#53075 = VECTOR('',#53076,1.); +#53076 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53077 = ORIENTED_EDGE('',*,*,#53078,.T.); +#53078 = EDGE_CURVE('',#53071,#53079,#53081,.T.); +#53079 = VERTEX_POINT('',#53080); +#53080 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53081 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53082,#53083),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53082 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53083 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53084 = ORIENTED_EDGE('',*,*,#53085,.F.); +#53085 = EDGE_CURVE('',#52938,#53079,#53086,.T.); +#53086 = LINE('',#53087,#53088); +#53087 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53088 = VECTOR('',#53089,1.); +#53089 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53090 = ORIENTED_EDGE('',*,*,#52937,.F.); +#53091 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53092,#53093) + ,(#53094,#53095 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53092 = CARTESIAN_POINT('',(2.37747286303,1.72247286303,0.22)); +#53093 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53094 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53095 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53096 = ADVANCED_FACE('',(#53097),#53120,.T.); +#53097 = FACE_BOUND('',#53098,.T.); +#53098 = EDGE_LOOP('',(#53099,#53109,#53114,#53115)); +#53099 = ORIENTED_EDGE('',*,*,#53100,.T.); +#53100 = EDGE_CURVE('',#53101,#53103,#53105,.T.); +#53101 = VERTEX_POINT('',#53102); +#53102 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53103 = VERTEX_POINT('',#53104); +#53104 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53105 = LINE('',#53106,#53107); +#53106 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53107 = VECTOR('',#53108,1.); +#53108 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53109 = ORIENTED_EDGE('',*,*,#53110,.T.); +#53110 = EDGE_CURVE('',#53103,#52968,#53111,.T.); +#53111 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53112,#53113),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53112 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53113 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53114 = ORIENTED_EDGE('',*,*,#52967,.F.); +#53115 = ORIENTED_EDGE('',*,*,#53116,.F.); +#53116 = EDGE_CURVE('',#53101,#52960,#53117,.T.); +#53117 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53118,#53119),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53118 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53119 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#53120 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53121,#53122) + ,(#53123,#53124 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.44494572606),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53121 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53122 = CARTESIAN_POINT('',(1.3,-1.72247286303,0.22)); +#53123 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53124 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53125 = ADVANCED_FACE('',(#53126),#53174,.T.); +#53126 = FACE_BOUND('',#53127,.T.); +#53127 = EDGE_LOOP('',(#53128,#53129,#53135,#53136,#53144,#53152,#53160, + #53168)); +#53128 = ORIENTED_EDGE('',*,*,#53070,.F.); +#53129 = ORIENTED_EDGE('',*,*,#53130,.T.); +#53130 = EDGE_CURVE('',#53063,#52996,#53131,.T.); +#53131 = LINE('',#53132,#53133); +#53132 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53133 = VECTOR('',#53134,1.); +#53134 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53135 = ORIENTED_EDGE('',*,*,#52993,.F.); +#53136 = ORIENTED_EDGE('',*,*,#53137,.F.); +#53137 = EDGE_CURVE('',#53138,#52994,#53140,.T.); +#53138 = VERTEX_POINT('',#53139); +#53139 = CARTESIAN_POINT('',(-2.37747286303,-1.,0.22)); +#53140 = LINE('',#53141,#53142); +#53141 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53142 = VECTOR('',#53143,1.); +#53143 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53144 = ORIENTED_EDGE('',*,*,#53145,.T.); +#53145 = EDGE_CURVE('',#53138,#53146,#53148,.T.); +#53146 = VERTEX_POINT('',#53147); +#53147 = CARTESIAN_POINT('',(-1.4,-1.,0.22)); +#53148 = LINE('',#53149,#53150); +#53149 = CARTESIAN_POINT('',(9.781598156056E-02,-1.,0.22)); +#53150 = VECTOR('',#53151,1.); +#53151 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53152 = ORIENTED_EDGE('',*,*,#53153,.T.); +#53153 = EDGE_CURVE('',#53146,#53154,#53156,.T.); +#53154 = VERTEX_POINT('',#53155); +#53155 = CARTESIAN_POINT('',(-1.4,1.,0.22)); +#53156 = LINE('',#53157,#53158); +#53157 = CARTESIAN_POINT('',(-1.4,-0.361236431515,0.22)); +#53158 = VECTOR('',#53159,1.); +#53159 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53160 = ORIENTED_EDGE('',*,*,#53161,.T.); +#53161 = EDGE_CURVE('',#53154,#53162,#53164,.T.); +#53162 = VERTEX_POINT('',#53163); +#53163 = CARTESIAN_POINT('',(-2.37747286303,1.,0.22)); +#53164 = LINE('',#53165,#53166); +#53165 = CARTESIAN_POINT('',(9.781598156056E-02,1.,0.22)); +#53166 = VECTOR('',#53167,1.); +#53167 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53168 = ORIENTED_EDGE('',*,*,#53169,.F.); +#53169 = EDGE_CURVE('',#53071,#53162,#53170,.T.); +#53170 = LINE('',#53171,#53172); +#53171 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53172 = VECTOR('',#53173,1.); +#53173 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53174 = PLANE('',#53175); +#53175 = AXIS2_PLACEMENT_3D('',#53176,#53177,#53178); +#53176 = CARTESIAN_POINT('',(2.37747286303,-1.72247286303,0.22)); +#53177 = DIRECTION('',(0.,0.,-1.)); +#53178 = DIRECTION('',(-0.809803822742,0.586700748825,0.)); +#53179 = ADVANCED_FACE('',(#53180),#53217,.T.); +#53180 = FACE_BOUND('',#53181,.T.); +#53181 = EDGE_LOOP('',(#53182,#53183,#53184,#53194,#53201,#53209,#53210, + #53211)); +#53182 = ORIENTED_EDGE('',*,*,#53078,.F.); +#53183 = ORIENTED_EDGE('',*,*,#53169,.T.); +#53184 = ORIENTED_EDGE('',*,*,#53185,.T.); +#53185 = EDGE_CURVE('',#53162,#53186,#53188,.T.); +#53186 = VERTEX_POINT('',#53187); +#53187 = CARTESIAN_POINT('',(-2.377627457948,1.,0.2222)); +#53188 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#53189,#53190,#53191,#53192, + #53193),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53189 = CARTESIAN_POINT('',(-2.37747286303,1.,0.22)); +#53190 = CARTESIAN_POINT('',(-2.390434471179,1.,0.40445326836)); +#53191 = CARTESIAN_POINT('',(-2.403396226036,1.,0.588908624477)); +#53192 = CARTESIAN_POINT('',(-2.416358116612,1.,0.773365911976)); +#53193 = CARTESIAN_POINT('',(-2.429320133712,1.,0.957825)); +#53194 = ORIENTED_EDGE('',*,*,#53195,.F.); +#53195 = EDGE_CURVE('',#53196,#53186,#53198,.T.); +#53196 = VERTEX_POINT('',#53197); +#53197 = CARTESIAN_POINT('',(-2.377627457948,-1.,0.2222)); +#53198 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53199,#53200),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53199 = CARTESIAN_POINT('',(-2.377627457948,-1.,0.2222)); +#53200 = CARTESIAN_POINT('',(-2.377627457948,1.,0.2222)); +#53201 = ORIENTED_EDGE('',*,*,#53202,.F.); +#53202 = EDGE_CURVE('',#53138,#53196,#53203,.T.); +#53203 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#53204,#53205,#53206,#53207, + #53208),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53204 = CARTESIAN_POINT('',(-2.37747286303,-1.,0.22)); +#53205 = CARTESIAN_POINT('',(-2.390434471179,-1.,0.40445326836)); +#53206 = CARTESIAN_POINT('',(-2.403396226036,-1.,0.588908624477)); +#53207 = CARTESIAN_POINT('',(-2.416358116612,-1.,0.773365911976)); +#53208 = CARTESIAN_POINT('',(-2.429320133712,-1.,0.957825)); +#53209 = ORIENTED_EDGE('',*,*,#53137,.T.); +#53210 = ORIENTED_EDGE('',*,*,#53019,.T.); +#53211 = ORIENTED_EDGE('',*,*,#53212,.F.); +#53212 = EDGE_CURVE('',#53079,#53012,#53213,.T.); +#53213 = LINE('',#53214,#53215); +#53214 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53215 = VECTOR('',#53216,1.); +#53216 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53217 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53218,#53219) + ,(#53220,#53221 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53218 = CARTESIAN_POINT('',(-2.37747286303,1.72247286303,0.22)); +#53219 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53220 = CARTESIAN_POINT('',(-2.37747286303,-1.72247286303,0.22)); +#53221 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53222 = ADVANCED_FACE('',(#53223),#53240,.T.); +#53223 = FACE_BOUND('',#53224,.T.); +#53224 = EDGE_LOOP('',(#53225,#53233,#53234,#53235)); +#53225 = ORIENTED_EDGE('',*,*,#53226,.T.); +#53226 = EDGE_CURVE('',#53227,#53101,#53229,.T.); +#53227 = VERTEX_POINT('',#53228); +#53228 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53229 = LINE('',#53230,#53231); +#53230 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53231 = VECTOR('',#53232,1.); +#53232 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53233 = ORIENTED_EDGE('',*,*,#53116,.T.); +#53234 = ORIENTED_EDGE('',*,*,#53003,.F.); +#53235 = ORIENTED_EDGE('',*,*,#53236,.F.); +#53236 = EDGE_CURVE('',#53227,#52996,#53237,.T.); +#53237 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53238,#53239),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53238 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53239 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53240 = PLANE('',#53241); +#53241 = AXIS2_PLACEMENT_3D('',#53242,#53243,#53244); +#53242 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53243 = DIRECTION('',(-2.214984063823E-16,-0.997540140447, + -7.009756199374E-02)); +#53244 = DIRECTION('',(1.,-2.22044604925E-16,-1.181399173945E-30)); +#53245 = ADVANCED_FACE('',(#53246),#53263,.T.); +#53246 = FACE_BOUND('',#53247,.T.); +#53247 = EDGE_LOOP('',(#53248,#53249,#53250,#53258)); +#53248 = ORIENTED_EDGE('',*,*,#53011,.T.); +#53249 = ORIENTED_EDGE('',*,*,#53048,.T.); +#53250 = ORIENTED_EDGE('',*,*,#53251,.F.); +#53251 = EDGE_CURVE('',#53252,#53041,#53254,.T.); +#53252 = VERTEX_POINT('',#53253); +#53253 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53254 = LINE('',#53255,#53256); +#53255 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53256 = VECTOR('',#53257,1.); +#53257 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53258 = ORIENTED_EDGE('',*,*,#53259,.F.); +#53259 = EDGE_CURVE('',#53012,#53252,#53260,.T.); +#53260 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53261,#53262),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53261 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53262 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53263 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53264,#53265) + ,(#53266,#53267 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53264 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53265 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53266 = CARTESIAN_POINT('',(2.43,-1.775,0.9675)); +#53267 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53268 = ADVANCED_FACE('',(#53269),#53286,.T.); +#53269 = FACE_BOUND('',#53270,.T.); +#53270 = EDGE_LOOP('',(#53271,#53272,#53279,#53285)); +#53271 = ORIENTED_EDGE('',*,*,#53085,.T.); +#53272 = ORIENTED_EDGE('',*,*,#53273,.T.); +#53273 = EDGE_CURVE('',#53079,#53274,#53276,.T.); +#53274 = VERTEX_POINT('',#53275); +#53275 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53276 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53277,#53278),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53277 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53278 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53279 = ORIENTED_EDGE('',*,*,#53280,.F.); +#53280 = EDGE_CURVE('',#53034,#53274,#53281,.T.); +#53281 = LINE('',#53282,#53283); +#53282 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53283 = VECTOR('',#53284,1.); +#53284 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53285 = ORIENTED_EDGE('',*,*,#53033,.F.); +#53286 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53287,#53288) + ,(#53289,#53290 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.86),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53287 = CARTESIAN_POINT('',(2.43,1.775,0.9675)); +#53288 = CARTESIAN_POINT('',(2.346905231482,1.691905231482,2.15)); +#53289 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53290 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53291 = ADVANCED_FACE('',(#53292,#53303),#53337,.F.); +#53292 = FACE_BOUND('',#53293,.F.); +#53293 = EDGE_LOOP('',(#53294,#53295,#53296,#53302)); +#53294 = ORIENTED_EDGE('',*,*,#53040,.F.); +#53295 = ORIENTED_EDGE('',*,*,#53251,.F.); +#53296 = ORIENTED_EDGE('',*,*,#53297,.F.); +#53297 = EDGE_CURVE('',#53274,#53252,#53298,.T.); +#53298 = LINE('',#53299,#53300); +#53299 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53300 = VECTOR('',#53301,1.); +#53301 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53302 = ORIENTED_EDGE('',*,*,#53280,.F.); +#53303 = FACE_BOUND('',#53304,.F.); +#53304 = EDGE_LOOP('',(#53305,#53315,#53323,#53331)); +#53305 = ORIENTED_EDGE('',*,*,#53306,.T.); +#53306 = EDGE_CURVE('',#53307,#53309,#53311,.T.); +#53307 = VERTEX_POINT('',#53308); +#53308 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53309 = VERTEX_POINT('',#53310); +#53310 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53311 = LINE('',#53312,#53313); +#53312 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53313 = VECTOR('',#53314,1.); +#53314 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53315 = ORIENTED_EDGE('',*,*,#53316,.T.); +#53316 = EDGE_CURVE('',#53309,#53317,#53319,.T.); +#53317 = VERTEX_POINT('',#53318); +#53318 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53319 = LINE('',#53320,#53321); +#53320 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53321 = VECTOR('',#53322,1.); +#53322 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53323 = ORIENTED_EDGE('',*,*,#53324,.T.); +#53324 = EDGE_CURVE('',#53317,#53325,#53327,.T.); +#53325 = VERTEX_POINT('',#53326); +#53326 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53327 = LINE('',#53328,#53329); +#53328 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53329 = VECTOR('',#53330,1.); +#53330 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53331 = ORIENTED_EDGE('',*,*,#53332,.T.); +#53332 = EDGE_CURVE('',#53325,#53307,#53333,.T.); +#53333 = LINE('',#53334,#53335); +#53334 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53335 = VECTOR('',#53336,1.); +#53336 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53337 = PLANE('',#53338); +#53338 = AXIS2_PLACEMENT_3D('',#53339,#53340,#53341); +#53339 = CARTESIAN_POINT('',(2.346905231482,-1.691905231482,2.15)); +#53340 = DIRECTION('',(0.,0.,-1.)); +#53341 = DIRECTION('',(-0.811184528135,0.584790271221,0.)); +#53342 = ADVANCED_FACE('',(#53343),#53360,.T.); +#53343 = FACE_BOUND('',#53344,.T.); +#53344 = EDGE_LOOP('',(#53345,#53353,#53358,#53359)); +#53345 = ORIENTED_EDGE('',*,*,#53346,.T.); +#53346 = EDGE_CURVE('',#53103,#53347,#53349,.T.); +#53347 = VERTEX_POINT('',#53348); +#53348 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53349 = LINE('',#53350,#53351); +#53350 = CARTESIAN_POINT('',(1.3,1.707013371213,0.)); +#53351 = VECTOR('',#53352,1.); +#53352 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53353 = ORIENTED_EDGE('',*,*,#53354,.T.); +#53354 = EDGE_CURVE('',#53347,#53063,#53355,.T.); +#53355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53356,#53357),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53356 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53357 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53358 = ORIENTED_EDGE('',*,*,#53062,.F.); +#53359 = ORIENTED_EDGE('',*,*,#53110,.F.); +#53360 = PLANE('',#53361); +#53361 = AXIS2_PLACEMENT_3D('',#53362,#53363,#53364); +#53362 = CARTESIAN_POINT('',(1.3,1.72247286303,0.22)); +#53363 = DIRECTION('',(2.214984063823E-16,0.997540140447, + -7.009756199374E-02)); +#53364 = DIRECTION('',(-1.,2.22044604925E-16,-1.181399173945E-30)); +#53365 = ADVANCED_FACE('',(#53366),#53377,.T.); +#53366 = FACE_BOUND('',#53367,.F.); +#53367 = EDGE_LOOP('',(#53368,#53369,#53370,#53376)); +#53368 = ORIENTED_EDGE('',*,*,#53100,.T.); +#53369 = ORIENTED_EDGE('',*,*,#53346,.T.); +#53370 = ORIENTED_EDGE('',*,*,#53371,.T.); +#53371 = EDGE_CURVE('',#53347,#53227,#53372,.T.); +#53372 = LINE('',#53373,#53374); +#53373 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53374 = VECTOR('',#53375,1.); +#53375 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53376 = ORIENTED_EDGE('',*,*,#53226,.T.); +#53377 = PLANE('',#53378); +#53378 = AXIS2_PLACEMENT_3D('',#53379,#53380,#53381); +#53379 = CARTESIAN_POINT('',(1.3,-1.707013371213,0.)); +#53380 = DIRECTION('',(0.,0.,-1.)); +#53381 = DIRECTION('',(-0.605871695069,0.795562372863,0.)); +#53382 = ADVANCED_FACE('',(#53383),#53451,.T.); +#53383 = FACE_BOUND('',#53384,.T.); +#53384 = EDGE_LOOP('',(#53385,#53396,#53404,#53413,#53421,#53429,#53435, + #53436,#53437,#53445)); +#53385 = ORIENTED_EDGE('',*,*,#53386,.F.); +#53386 = EDGE_CURVE('',#53387,#53389,#53391,.T.); +#53387 = VERTEX_POINT('',#53388); +#53388 = CARTESIAN_POINT('',(-2.65,1.,0.146666666667)); +#53389 = VERTEX_POINT('',#53390); +#53390 = CARTESIAN_POINT('',(-2.503333333333,1.,-2.775557561563E-17)); +#53391 = CIRCLE('',#53392,0.146666666667); +#53392 = AXIS2_PLACEMENT_3D('',#53393,#53394,#53395); +#53393 = CARTESIAN_POINT('',(-2.503333333333,1.,0.146666666667)); +#53394 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53395 = DIRECTION('',(0.,0.,1.)); +#53396 = ORIENTED_EDGE('',*,*,#53397,.T.); +#53397 = EDGE_CURVE('',#53387,#53398,#53400,.T.); +#53398 = VERTEX_POINT('',#53399); +#53399 = CARTESIAN_POINT('',(-2.65,1.,0.811158333333)); +#53400 = LINE('',#53401,#53402); +#53401 = CARTESIAN_POINT('',(-2.65,1.,0.)); +#53402 = VECTOR('',#53403,1.); +#53403 = DIRECTION('',(0.,0.,1.)); +#53404 = ORIENTED_EDGE('',*,*,#53405,.T.); +#53405 = EDGE_CURVE('',#53398,#53406,#53408,.T.); +#53406 = VERTEX_POINT('',#53407); +#53407 = CARTESIAN_POINT('',(-2.503333333333,1.,0.957825)); +#53408 = CIRCLE('',#53409,0.146666666667); +#53409 = AXIS2_PLACEMENT_3D('',#53410,#53411,#53412); +#53410 = CARTESIAN_POINT('',(-2.503333333333,1.,0.811158333333)); +#53411 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#53412 = DIRECTION('',(0.,0.,1.)); +#53413 = ORIENTED_EDGE('',*,*,#53414,.T.); +#53414 = EDGE_CURVE('',#53406,#53415,#53417,.T.); +#53415 = VERTEX_POINT('',#53416); +#53416 = CARTESIAN_POINT('',(-2.43,1.,0.957825)); +#53417 = LINE('',#53418,#53419); +#53418 = CARTESIAN_POINT('',(-2.65,1.,0.957825)); +#53419 = VECTOR('',#53420,1.); +#53420 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53421 = ORIENTED_EDGE('',*,*,#53422,.F.); +#53422 = EDGE_CURVE('',#53423,#53415,#53425,.T.); +#53423 = VERTEX_POINT('',#53424); +#53424 = CARTESIAN_POINT('',(-2.43,1.,0.2222)); +#53425 = LINE('',#53426,#53427); +#53426 = CARTESIAN_POINT('',(-2.43,1.,0.)); +#53427 = VECTOR('',#53428,1.); +#53428 = DIRECTION('',(0.,0.,1.)); +#53429 = ORIENTED_EDGE('',*,*,#53430,.T.); +#53430 = EDGE_CURVE('',#53423,#53186,#53431,.T.); +#53431 = LINE('',#53432,#53433); +#53432 = CARTESIAN_POINT('',(-2.43,1.,0.2222)); +#53433 = VECTOR('',#53434,1.); +#53434 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53435 = ORIENTED_EDGE('',*,*,#53185,.F.); +#53436 = ORIENTED_EDGE('',*,*,#53161,.F.); +#53437 = ORIENTED_EDGE('',*,*,#53438,.F.); +#53438 = EDGE_CURVE('',#53439,#53154,#53441,.T.); +#53439 = VERTEX_POINT('',#53440); +#53440 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53441 = LINE('',#53442,#53443); +#53442 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53443 = VECTOR('',#53444,1.); +#53444 = DIRECTION('',(0.,0.,1.)); +#53445 = ORIENTED_EDGE('',*,*,#53446,.F.); +#53446 = EDGE_CURVE('',#53389,#53439,#53447,.T.); +#53447 = LINE('',#53448,#53449); +#53448 = CARTESIAN_POINT('',(-2.43,1.,0.)); +#53449 = VECTOR('',#53450,1.); +#53450 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53451 = PLANE('',#53452); +#53452 = AXIS2_PLACEMENT_3D('',#53453,#53454,#53455); +#53453 = CARTESIAN_POINT('',(-2.181840899909,1.,0.302067385793)); +#53454 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53455 = DIRECTION('',(0.,-0.,1.)); +#53456 = ADVANCED_FACE('',(#53457),#53475,.T.); +#53457 = FACE_BOUND('',#53458,.T.); +#53458 = EDGE_LOOP('',(#53459,#53467,#53468,#53469)); +#53459 = ORIENTED_EDGE('',*,*,#53460,.F.); +#53460 = EDGE_CURVE('',#53439,#53461,#53463,.T.); +#53461 = VERTEX_POINT('',#53462); +#53462 = CARTESIAN_POINT('',(-1.4,-1.,0.)); +#53463 = LINE('',#53464,#53465); +#53464 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53465 = VECTOR('',#53466,1.); +#53466 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53467 = ORIENTED_EDGE('',*,*,#53438,.T.); +#53468 = ORIENTED_EDGE('',*,*,#53153,.F.); +#53469 = ORIENTED_EDGE('',*,*,#53470,.F.); +#53470 = EDGE_CURVE('',#53461,#53146,#53471,.T.); +#53471 = LINE('',#53472,#53473); +#53472 = CARTESIAN_POINT('',(-1.4,-1.,0.)); +#53473 = VECTOR('',#53474,1.); +#53474 = DIRECTION('',(0.,0.,1.)); +#53475 = PLANE('',#53476); +#53476 = AXIS2_PLACEMENT_3D('',#53477,#53478,#53479); +#53477 = CARTESIAN_POINT('',(-1.4,1.,0.)); +#53478 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53479 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53480 = ADVANCED_FACE('',(#53481),#53542,.T.); +#53481 = FACE_BOUND('',#53482,.T.); +#53482 = EDGE_LOOP('',(#53483,#53493,#53502,#53508,#53509,#53510,#53511, + #53519,#53527,#53535)); +#53483 = ORIENTED_EDGE('',*,*,#53484,.F.); +#53484 = EDGE_CURVE('',#53485,#53487,#53489,.T.); +#53485 = VERTEX_POINT('',#53486); +#53486 = CARTESIAN_POINT('',(-2.65,-1.,0.146666666667)); +#53487 = VERTEX_POINT('',#53488); +#53488 = CARTESIAN_POINT('',(-2.65,-1.,0.811158333333)); +#53489 = LINE('',#53490,#53491); +#53490 = CARTESIAN_POINT('',(-2.65,-1.,0.)); +#53491 = VECTOR('',#53492,1.); +#53492 = DIRECTION('',(0.,0.,1.)); +#53493 = ORIENTED_EDGE('',*,*,#53494,.T.); +#53494 = EDGE_CURVE('',#53485,#53495,#53497,.T.); +#53495 = VERTEX_POINT('',#53496); +#53496 = CARTESIAN_POINT('',(-2.503333333333,-1.,-2.775557561563E-17)); +#53497 = CIRCLE('',#53498,0.146666666667); +#53498 = AXIS2_PLACEMENT_3D('',#53499,#53500,#53501); +#53499 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.146666666667)); +#53500 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53501 = DIRECTION('',(0.,0.,1.)); +#53502 = ORIENTED_EDGE('',*,*,#53503,.F.); +#53503 = EDGE_CURVE('',#53461,#53495,#53504,.T.); +#53504 = LINE('',#53505,#53506); +#53505 = CARTESIAN_POINT('',(-2.43,-1.,0.)); +#53506 = VECTOR('',#53507,1.); +#53507 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53508 = ORIENTED_EDGE('',*,*,#53470,.T.); +#53509 = ORIENTED_EDGE('',*,*,#53145,.F.); +#53510 = ORIENTED_EDGE('',*,*,#53202,.T.); +#53511 = ORIENTED_EDGE('',*,*,#53512,.T.); +#53512 = EDGE_CURVE('',#53196,#53513,#53515,.T.); +#53513 = VERTEX_POINT('',#53514); +#53514 = CARTESIAN_POINT('',(-2.43,-1.,0.2222)); +#53515 = LINE('',#53516,#53517); +#53516 = CARTESIAN_POINT('',(-1.4,-1.,0.2222)); +#53517 = VECTOR('',#53518,1.); +#53518 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53519 = ORIENTED_EDGE('',*,*,#53520,.T.); +#53520 = EDGE_CURVE('',#53513,#53521,#53523,.T.); +#53521 = VERTEX_POINT('',#53522); +#53522 = CARTESIAN_POINT('',(-2.43,-1.,0.957825)); +#53523 = LINE('',#53524,#53525); +#53524 = CARTESIAN_POINT('',(-2.43,-1.,0.)); +#53525 = VECTOR('',#53526,1.); +#53526 = DIRECTION('',(0.,0.,1.)); +#53527 = ORIENTED_EDGE('',*,*,#53528,.T.); +#53528 = EDGE_CURVE('',#53521,#53529,#53531,.T.); +#53529 = VERTEX_POINT('',#53530); +#53530 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.957825)); +#53531 = LINE('',#53532,#53533); +#53532 = CARTESIAN_POINT('',(-2.43,-1.,0.957825)); +#53533 = VECTOR('',#53534,1.); +#53534 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53535 = ORIENTED_EDGE('',*,*,#53536,.F.); +#53536 = EDGE_CURVE('',#53487,#53529,#53537,.T.); +#53537 = CIRCLE('',#53538,0.146666666667); +#53538 = AXIS2_PLACEMENT_3D('',#53539,#53540,#53541); +#53539 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.811158333333)); +#53540 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#53541 = DIRECTION('',(0.,0.,1.)); +#53542 = PLANE('',#53543); +#53543 = AXIS2_PLACEMENT_3D('',#53544,#53545,#53546); +#53544 = CARTESIAN_POINT('',(-2.181840899909,-1.,0.302067385793)); +#53545 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#53546 = DIRECTION('',(0.,0.,-1.)); +#53547 = ADVANCED_FACE('',(#53548),#53554,.T.); +#53548 = FACE_BOUND('',#53549,.T.); +#53549 = EDGE_LOOP('',(#53550,#53551,#53552,#53553)); +#53550 = ORIENTED_EDGE('',*,*,#53371,.T.); +#53551 = ORIENTED_EDGE('',*,*,#53236,.T.); +#53552 = ORIENTED_EDGE('',*,*,#53130,.F.); +#53553 = ORIENTED_EDGE('',*,*,#53354,.F.); +#53554 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53555,#53556) + ,(#53557,#53558 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.44494572606),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53555 = CARTESIAN_POINT('',(-1.3,1.707013371213,0.)); +#53556 = CARTESIAN_POINT('',(-1.3,1.72247286303,0.22)); +#53557 = CARTESIAN_POINT('',(-1.3,-1.707013371213,0.)); +#53558 = CARTESIAN_POINT('',(-1.3,-1.72247286303,0.22)); +#53559 = ADVANCED_FACE('',(#53560),#53566,.T.); +#53560 = FACE_BOUND('',#53561,.T.); +#53561 = EDGE_LOOP('',(#53562,#53563,#53564,#53565)); +#53562 = ORIENTED_EDGE('',*,*,#53212,.T.); +#53563 = ORIENTED_EDGE('',*,*,#53259,.T.); +#53564 = ORIENTED_EDGE('',*,*,#53297,.F.); +#53565 = ORIENTED_EDGE('',*,*,#53273,.F.); +#53566 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53567,#53568) + ,(#53569,#53570 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53567 = CARTESIAN_POINT('',(-2.43,1.775,0.9675)); +#53568 = CARTESIAN_POINT('',(-2.346905231482,1.691905231482,2.15)); +#53569 = CARTESIAN_POINT('',(-2.43,-1.775,0.9675)); +#53570 = CARTESIAN_POINT('',(-2.346905231482,-1.691905231482,2.15)); +#53571 = ADVANCED_FACE('',(#53572),#53583,.F.); +#53572 = FACE_BOUND('',#53573,.F.); +#53573 = EDGE_LOOP('',(#53574,#53575,#53576,#53582)); +#53574 = ORIENTED_EDGE('',*,*,#53195,.F.); +#53575 = ORIENTED_EDGE('',*,*,#53512,.T.); +#53576 = ORIENTED_EDGE('',*,*,#53577,.T.); +#53577 = EDGE_CURVE('',#53513,#53423,#53578,.T.); +#53578 = LINE('',#53579,#53580); +#53579 = CARTESIAN_POINT('',(-2.43,-1.,0.2222)); +#53580 = VECTOR('',#53581,1.); +#53581 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53582 = ORIENTED_EDGE('',*,*,#53430,.T.); +#53583 = PLANE('',#53584); +#53584 = AXIS2_PLACEMENT_3D('',#53585,#53586,#53587); +#53585 = CARTESIAN_POINT('',(-1.915,4.440892098501E-16,0.2222)); +#53586 = DIRECTION('',(0.,-0.,-1.)); +#53587 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53588 = ADVANCED_FACE('',(#53589),#53612,.F.); +#53589 = FACE_BOUND('',#53590,.F.); +#53590 = EDGE_LOOP('',(#53591,#53601,#53606,#53607)); +#53591 = ORIENTED_EDGE('',*,*,#53592,.T.); +#53592 = EDGE_CURVE('',#53593,#53595,#53597,.T.); +#53593 = VERTEX_POINT('',#53594); +#53594 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.1478)); +#53595 = VERTEX_POINT('',#53596); +#53596 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.1478)); +#53597 = LINE('',#53598,#53599); +#53598 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.1478)); +#53599 = VECTOR('',#53600,1.); +#53600 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53601 = ORIENTED_EDGE('',*,*,#53602,.T.); +#53602 = EDGE_CURVE('',#53595,#53309,#53603,.T.); +#53603 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53604,#53605),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53604 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.1478)); +#53605 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53606 = ORIENTED_EDGE('',*,*,#53306,.F.); +#53607 = ORIENTED_EDGE('',*,*,#53608,.F.); +#53608 = EDGE_CURVE('',#53593,#53307,#53609,.T.); +#53609 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53610,#53611),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53610 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.1478)); +#53611 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53612 = PLANE('',#53613); +#53613 = AXIS2_PLACEMENT_3D('',#53614,#53615,#53616); +#53614 = CARTESIAN_POINT('',(-1.663810462964,1.608810462964,2.15)); +#53615 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53616 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53617 = ADVANCED_FACE('',(#53618),#53635,.F.); +#53618 = FACE_BOUND('',#53619,.F.); +#53619 = EDGE_LOOP('',(#53620,#53628,#53629,#53630)); +#53620 = ORIENTED_EDGE('',*,*,#53621,.T.); +#53621 = EDGE_CURVE('',#53622,#53593,#53624,.T.); +#53622 = VERTEX_POINT('',#53623); +#53623 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53624 = LINE('',#53625,#53626); +#53625 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53626 = VECTOR('',#53627,1.); +#53627 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53628 = ORIENTED_EDGE('',*,*,#53608,.T.); +#53629 = ORIENTED_EDGE('',*,*,#53332,.F.); +#53630 = ORIENTED_EDGE('',*,*,#53631,.F.); +#53631 = EDGE_CURVE('',#53622,#53325,#53632,.T.); +#53632 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53633,#53634),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53633 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53634 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53635 = PLANE('',#53636); +#53636 = AXIS2_PLACEMENT_3D('',#53637,#53638,#53639); +#53637 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.15)); +#53638 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53639 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53640 = ADVANCED_FACE('',(#53641),#53658,.F.); +#53641 = FACE_BOUND('',#53642,.F.); +#53642 = EDGE_LOOP('',(#53643,#53651,#53652,#53653)); +#53643 = ORIENTED_EDGE('',*,*,#53644,.T.); +#53644 = EDGE_CURVE('',#53645,#53622,#53647,.T.); +#53645 = VERTEX_POINT('',#53646); +#53646 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.1478)); +#53647 = LINE('',#53648,#53649); +#53648 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.1478)); +#53649 = VECTOR('',#53650,1.); +#53650 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53651 = ORIENTED_EDGE('',*,*,#53631,.T.); +#53652 = ORIENTED_EDGE('',*,*,#53324,.F.); +#53653 = ORIENTED_EDGE('',*,*,#53654,.F.); +#53654 = EDGE_CURVE('',#53645,#53317,#53655,.T.); +#53655 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53656,#53657),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53656 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.1478)); +#53657 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53658 = PLANE('',#53659); +#53659 = AXIS2_PLACEMENT_3D('',#53660,#53661,#53662); +#53660 = CARTESIAN_POINT('',(-2.263810462964,-1.608810462964,2.15)); +#53661 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53662 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53663 = ADVANCED_FACE('',(#53664),#53675,.F.); +#53664 = FACE_BOUND('',#53665,.F.); +#53665 = EDGE_LOOP('',(#53666,#53672,#53673,#53674)); +#53666 = ORIENTED_EDGE('',*,*,#53667,.T.); +#53667 = EDGE_CURVE('',#53595,#53645,#53668,.T.); +#53668 = LINE('',#53669,#53670); +#53669 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.1478)); +#53670 = VECTOR('',#53671,1.); +#53671 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53672 = ORIENTED_EDGE('',*,*,#53654,.T.); +#53673 = ORIENTED_EDGE('',*,*,#53316,.F.); +#53674 = ORIENTED_EDGE('',*,*,#53602,.F.); +#53675 = PLANE('',#53676); +#53676 = AXIS2_PLACEMENT_3D('',#53677,#53678,#53679); +#53677 = CARTESIAN_POINT('',(-2.263810462964,1.608810462964,2.15)); +#53678 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53679 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53680 = ADVANCED_FACE('',(#53681),#53697,.T.); +#53681 = FACE_BOUND('',#53682,.T.); +#53682 = EDGE_LOOP('',(#53683,#53689,#53690,#53696)); +#53683 = ORIENTED_EDGE('',*,*,#53684,.T.); +#53684 = EDGE_CURVE('',#53485,#53387,#53685,.T.); +#53685 = LINE('',#53686,#53687); +#53686 = CARTESIAN_POINT('',(-2.65,-1.,0.146666666667)); +#53687 = VECTOR('',#53688,1.); +#53688 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53689 = ORIENTED_EDGE('',*,*,#53386,.T.); +#53690 = ORIENTED_EDGE('',*,*,#53691,.F.); +#53691 = EDGE_CURVE('',#53495,#53389,#53692,.T.); +#53692 = LINE('',#53693,#53694); +#53693 = CARTESIAN_POINT('',(-2.503333333333,-1.,-2.775557561563E-17)); +#53694 = VECTOR('',#53695,1.); +#53695 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53696 = ORIENTED_EDGE('',*,*,#53494,.F.); +#53697 = CYLINDRICAL_SURFACE('',#53698,0.146666666667); +#53698 = AXIS2_PLACEMENT_3D('',#53699,#53700,#53701); +#53699 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.146666666667)); +#53700 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53701 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53702 = ADVANCED_FACE('',(#53703),#53709,.T.); +#53703 = FACE_BOUND('',#53704,.T.); +#53704 = EDGE_LOOP('',(#53705,#53706,#53707,#53708)); +#53705 = ORIENTED_EDGE('',*,*,#53503,.T.); +#53706 = ORIENTED_EDGE('',*,*,#53691,.T.); +#53707 = ORIENTED_EDGE('',*,*,#53446,.T.); +#53708 = ORIENTED_EDGE('',*,*,#53460,.T.); +#53709 = PLANE('',#53710); +#53710 = AXIS2_PLACEMENT_3D('',#53711,#53712,#53713); +#53711 = CARTESIAN_POINT('',(-1.951666666667,4.691322319676E-16, + -8.943794505573E-18)); +#53712 = DIRECTION('',(1.696061518107E-17,-4.165945518725E-33,-1.)); +#53713 = DIRECTION('',(1.,-2.22044604925E-16,1.696061518107E-17)); +#53714 = ADVANCED_FACE('',(#53715),#53726,.T.); +#53715 = FACE_BOUND('',#53716,.T.); +#53716 = EDGE_LOOP('',(#53717,#53718,#53719,#53725)); +#53717 = ORIENTED_EDGE('',*,*,#53577,.T.); +#53718 = ORIENTED_EDGE('',*,*,#53422,.T.); +#53719 = ORIENTED_EDGE('',*,*,#53720,.T.); +#53720 = EDGE_CURVE('',#53415,#53521,#53721,.T.); +#53721 = LINE('',#53722,#53723); +#53722 = CARTESIAN_POINT('',(-2.43,1.,0.957825)); +#53723 = VECTOR('',#53724,1.); +#53724 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53725 = ORIENTED_EDGE('',*,*,#53520,.F.); +#53726 = PLANE('',#53727); +#53727 = AXIS2_PLACEMENT_3D('',#53728,#53729,#53730); +#53728 = CARTESIAN_POINT('',(-2.43,1.,0.)); +#53729 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#53730 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53731 = ADVANCED_FACE('',(#53732),#53743,.F.); +#53732 = FACE_BOUND('',#53733,.F.); +#53733 = EDGE_LOOP('',(#53734,#53735,#53741,#53742)); +#53734 = ORIENTED_EDGE('',*,*,#53528,.T.); +#53735 = ORIENTED_EDGE('',*,*,#53736,.T.); +#53736 = EDGE_CURVE('',#53529,#53406,#53737,.T.); +#53737 = LINE('',#53738,#53739); +#53738 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.957825)); +#53739 = VECTOR('',#53740,1.); +#53740 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53741 = ORIENTED_EDGE('',*,*,#53414,.T.); +#53742 = ORIENTED_EDGE('',*,*,#53720,.T.); +#53743 = PLANE('',#53744); +#53744 = AXIS2_PLACEMENT_3D('',#53745,#53746,#53747); +#53745 = CARTESIAN_POINT('',(-2.54,6.661338147751E-16,0.957825)); +#53746 = DIRECTION('',(0.,-0.,-1.)); +#53747 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#53748 = ADVANCED_FACE('',(#53749),#53760,.T.); +#53749 = FACE_BOUND('',#53750,.T.); +#53750 = EDGE_LOOP('',(#53751,#53752,#53753,#53754)); +#53751 = ORIENTED_EDGE('',*,*,#53536,.T.); +#53752 = ORIENTED_EDGE('',*,*,#53736,.T.); +#53753 = ORIENTED_EDGE('',*,*,#53405,.F.); +#53754 = ORIENTED_EDGE('',*,*,#53755,.F.); +#53755 = EDGE_CURVE('',#53487,#53398,#53756,.T.); +#53756 = LINE('',#53757,#53758); +#53757 = CARTESIAN_POINT('',(-2.65,-1.,0.811158333333)); +#53758 = VECTOR('',#53759,1.); +#53759 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53760 = CYLINDRICAL_SURFACE('',#53761,0.146666666667); +#53761 = AXIS2_PLACEMENT_3D('',#53762,#53763,#53764); +#53762 = CARTESIAN_POINT('',(-2.503333333333,-1.,0.811158333333)); +#53763 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53764 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53765 = ADVANCED_FACE('',(#53766),#53772,.T.); +#53766 = FACE_BOUND('',#53767,.T.); +#53767 = EDGE_LOOP('',(#53768,#53769,#53770,#53771)); +#53768 = ORIENTED_EDGE('',*,*,#53484,.T.); +#53769 = ORIENTED_EDGE('',*,*,#53755,.T.); +#53770 = ORIENTED_EDGE('',*,*,#53397,.F.); +#53771 = ORIENTED_EDGE('',*,*,#53684,.F.); +#53772 = PLANE('',#53773); +#53773 = AXIS2_PLACEMENT_3D('',#53774,#53775,#53776); +#53774 = CARTESIAN_POINT('',(-2.65,-1.,0.)); +#53775 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#53776 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#53777 = ADVANCED_FACE('',(#53778),#53784,.F.); +#53778 = FACE_BOUND('',#53779,.T.); +#53779 = EDGE_LOOP('',(#53780,#53781,#53782,#53783)); +#53780 = ORIENTED_EDGE('',*,*,#53621,.T.); +#53781 = ORIENTED_EDGE('',*,*,#53592,.T.); +#53782 = ORIENTED_EDGE('',*,*,#53667,.T.); +#53783 = ORIENTED_EDGE('',*,*,#53644,.T.); +#53784 = PLANE('',#53785); +#53785 = AXIS2_PLACEMENT_3D('',#53786,#53787,#53788); +#53786 = CARTESIAN_POINT('',(-1.663810462964,-1.608810462964,2.1478)); +#53787 = DIRECTION('',(0.,0.,-1.)); +#53788 = DIRECTION('',(-0.183313304678,0.983054541889,0.)); +#53789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#53793)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#53790,#53791,#53792)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#53790 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#53791 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#53792 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#53793 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#53790, + 'distance_accuracy_value','confusion accuracy'); +#53794 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53795,#53797); +#53795 = ( REPRESENTATION_RELATIONSHIP('','',#52580,#52557) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53796) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53796 = ITEM_DEFINED_TRANSFORMATION('','',#11,#52558); +#53797 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53798); +#53798 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','=>[0:1:1:31]','',#52552, + #52575,$); +#53799 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#52577)); +#53800 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53801,#53803); +#53801 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53802) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53802 = ITEM_DEFINED_TRANSFORMATION('','',#11,#143); +#53803 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53804); +#53804 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('48','Rcomp','',#5,#523,$); +#53805 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53806,#53808); +#53806 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53807) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53807 = ITEM_DEFINED_TRANSFORMATION('','',#11,#147); +#53808 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53809); +#53809 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('49','Q5','',#5,#36156,$); +#53810 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53811,#53813); +#53811 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53812) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53812 = ITEM_DEFINED_TRANSFORMATION('','',#11,#151); +#53813 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53814); +#53814 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('50','C7','',#5,#14742,$); +#53815 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53816,#53818); +#53816 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53817) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53817 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155); +#53818 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53819); +#53819 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('51','P2','',#5,#11985,$); +#53820 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53821,#53823); +#53821 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53822) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53822 = ITEM_DEFINED_TRANSFORMATION('','',#11,#159); +#53823 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53824); +#53824 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('52','R20','',#5,#523,$); +#53825 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53826,#53828); +#53826 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53827) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53827 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163); +#53828 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53829); +#53829 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('53','Cbst2','',#5,#14742,$); +#53830 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53831,#53833); +#53831 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53832) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53832 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167); +#53833 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53834); +#53834 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('54','Rts','',#5,#523,$); +#53835 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53836,#53838); +#53836 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53837) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53837 = ITEM_DEFINED_TRANSFORMATION('','',#11,#171); +#53838 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53839); +#53839 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('55','Q2','',#5,#36156,$); +#53840 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53841,#53843); +#53841 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53842) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53842 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175); +#53843 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53844); +#53844 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('56','Cbst','',#5,#14742,$); +#53845 = SHAPE_DEFINITION_REPRESENTATION(#53846,#53852); +#53846 = PRODUCT_DEFINITION_SHAPE('','',#53847); +#53847 = PRODUCT_DEFINITION('design','',#53848,#53851); +#53848 = PRODUCT_DEFINITION_FORMATION('','',#53849); +#53849 = PRODUCT('PinHeader_1x03_P2.54mm_Vertical', + 'PinHeader_1x03_P2.54mm_Vertical','',(#53850)); +#53850 = PRODUCT_CONTEXT('',#2,'mechanical'); +#53851 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#53852 = SHAPE_REPRESENTATION('',(#11,#53853),#53857); +#53853 = AXIS2_PLACEMENT_3D('',#53854,#53855,#53856); +#53854 = CARTESIAN_POINT('',(0.,0.,0.)); +#53855 = DIRECTION('',(0.,0.,1.)); +#53856 = DIRECTION('',(1.,0.,-0.)); +#53857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#53861)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#53858,#53859,#53860)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#53858 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#53859 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#53860 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#53861 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#53858, + 'distance_accuracy_value','confusion accuracy'); +#53862 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53863,#53865); +#53863 = ( REPRESENTATION_RELATIONSHIP('','',#53852,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53864) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53864 = ITEM_DEFINED_TRANSFORMATION('','',#11,#179); +#53865 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53866); +#53866 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('58','H3','',#5,#53847,$); +#53867 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#53849)); +#53868 = SHAPE_DEFINITION_REPRESENTATION(#53869,#53875); +#53869 = PRODUCT_DEFINITION_SHAPE('','',#53870); +#53870 = PRODUCT_DEFINITION('design','',#53871,#53874); +#53871 = PRODUCT_DEFINITION_FORMATION('','',#53872); +#53872 = PRODUCT('PinHeader_1x03_P254mm_Vertical', + 'PinHeader_1x03_P254mm_Vertical','',(#53873)); +#53873 = PRODUCT_CONTEXT('',#2,'mechanical'); +#53874 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#53875 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#53876),#55982); +#53876 = MANIFOLD_SOLID_BREP('',#53877); +#53877 = CLOSED_SHELL('',(#53878,#53918,#53949,#53980,#54227,#54474, + #54491,#54508,#54525,#54542,#54559,#54576,#54593,#54610,#54627, + #54644,#54661,#54678,#54695,#54712,#54729,#54746,#54758,#54789, + #54813,#54837,#54854,#54885,#54909,#54933,#54950,#54981,#55005, + #55029,#55046,#55077,#55101,#55125,#55142,#55173,#55197,#55221, + #55238,#55269,#55293,#55317,#55334,#55365,#55389,#55413,#55430, + #55461,#55485,#55509,#55526,#55557,#55581,#55605,#55622,#55653, + #55677,#55701,#55718,#55749,#55773,#55797,#55814,#55845,#55869, + #55893,#55910,#55922,#55934,#55946,#55958,#55970)); +#53878 = ADVANCED_FACE('',(#53879),#53913,.F.); +#53879 = FACE_BOUND('',#53880,.F.); +#53880 = EDGE_LOOP('',(#53881,#53891,#53899,#53907)); +#53881 = ORIENTED_EDGE('',*,*,#53882,.T.); +#53882 = EDGE_CURVE('',#53883,#53885,#53887,.T.); +#53883 = VERTEX_POINT('',#53884); +#53884 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53885 = VERTEX_POINT('',#53886); +#53886 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#53887 = LINE('',#53888,#53889); +#53888 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53889 = VECTOR('',#53890,1.); +#53890 = DIRECTION('',(0.,0.,1.)); +#53891 = ORIENTED_EDGE('',*,*,#53892,.T.); +#53892 = EDGE_CURVE('',#53885,#53893,#53895,.T.); +#53893 = VERTEX_POINT('',#53894); +#53894 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#53895 = LINE('',#53896,#53897); +#53896 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#53897 = VECTOR('',#53898,1.); +#53898 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#53899 = ORIENTED_EDGE('',*,*,#53900,.F.); +#53900 = EDGE_CURVE('',#53901,#53893,#53903,.T.); +#53901 = VERTEX_POINT('',#53902); +#53902 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53903 = LINE('',#53904,#53905); +#53904 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53905 = VECTOR('',#53906,1.); +#53906 = DIRECTION('',(0.,0.,1.)); +#53907 = ORIENTED_EDGE('',*,*,#53908,.F.); +#53908 = EDGE_CURVE('',#53883,#53901,#53909,.T.); +#53909 = LINE('',#53910,#53911); +#53910 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53911 = VECTOR('',#53912,1.); +#53912 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#53913 = PLANE('',#53914); +#53914 = AXIS2_PLACEMENT_3D('',#53915,#53916,#53917); +#53915 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#53916 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#53917 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#53918 = ADVANCED_FACE('',(#53919),#53944,.F.); +#53919 = FACE_BOUND('',#53920,.F.); +#53920 = EDGE_LOOP('',(#53921,#53931,#53937,#53938)); +#53921 = ORIENTED_EDGE('',*,*,#53922,.T.); +#53922 = EDGE_CURVE('',#53923,#53925,#53927,.T.); +#53923 = VERTEX_POINT('',#53924); +#53924 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53925 = VERTEX_POINT('',#53926); +#53926 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#53927 = LINE('',#53928,#53929); +#53928 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53929 = VECTOR('',#53930,1.); +#53930 = DIRECTION('',(0.,0.,1.)); +#53931 = ORIENTED_EDGE('',*,*,#53932,.T.); +#53932 = EDGE_CURVE('',#53925,#53885,#53933,.T.); +#53933 = LINE('',#53934,#53935); +#53934 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#53935 = VECTOR('',#53936,1.); +#53936 = DIRECTION('',(-1.,0.,0.)); +#53937 = ORIENTED_EDGE('',*,*,#53882,.F.); +#53938 = ORIENTED_EDGE('',*,*,#53939,.F.); +#53939 = EDGE_CURVE('',#53923,#53883,#53940,.T.); +#53940 = LINE('',#53941,#53942); +#53941 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53942 = VECTOR('',#53943,1.); +#53943 = DIRECTION('',(-1.,0.,0.)); +#53944 = PLANE('',#53945); +#53945 = AXIS2_PLACEMENT_3D('',#53946,#53947,#53948); +#53946 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#53947 = DIRECTION('',(0.,-1.,0.)); +#53948 = DIRECTION('',(-1.,0.,0.)); +#53949 = ADVANCED_FACE('',(#53950),#53975,.F.); +#53950 = FACE_BOUND('',#53951,.F.); +#53951 = EDGE_LOOP('',(#53952,#53953,#53961,#53969)); +#53952 = ORIENTED_EDGE('',*,*,#53900,.T.); +#53953 = ORIENTED_EDGE('',*,*,#53954,.T.); +#53954 = EDGE_CURVE('',#53893,#53955,#53957,.T.); +#53955 = VERTEX_POINT('',#53956); +#53956 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#53957 = LINE('',#53958,#53959); +#53958 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#53959 = VECTOR('',#53960,1.); +#53960 = DIRECTION('',(0.,-1.,0.)); +#53961 = ORIENTED_EDGE('',*,*,#53962,.F.); +#53962 = EDGE_CURVE('',#53963,#53955,#53965,.T.); +#53963 = VERTEX_POINT('',#53964); +#53964 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#53965 = LINE('',#53966,#53967); +#53966 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#53967 = VECTOR('',#53968,1.); +#53968 = DIRECTION('',(0.,0.,1.)); +#53969 = ORIENTED_EDGE('',*,*,#53970,.F.); +#53970 = EDGE_CURVE('',#53901,#53963,#53971,.T.); +#53971 = LINE('',#53972,#53973); +#53972 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53973 = VECTOR('',#53974,1.); +#53974 = DIRECTION('',(0.,-1.,0.)); +#53975 = PLANE('',#53976); +#53976 = AXIS2_PLACEMENT_3D('',#53977,#53978,#53979); +#53977 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#53978 = DIRECTION('',(1.,0.,0.)); +#53979 = DIRECTION('',(0.,-1.,0.)); +#53980 = ADVANCED_FACE('',(#53981,#54120,#54154,#54188),#54222,.F.); +#53981 = FACE_BOUND('',#53982,.F.); +#53982 = EDGE_LOOP('',(#53983,#53984,#53985,#53993,#54001,#54009,#54017, + #54025,#54033,#54041,#54049,#54057,#54065,#54073,#54081,#54089, + #54097,#54105,#54113,#54119)); +#53983 = ORIENTED_EDGE('',*,*,#53908,.T.); +#53984 = ORIENTED_EDGE('',*,*,#53970,.T.); +#53985 = ORIENTED_EDGE('',*,*,#53986,.T.); +#53986 = EDGE_CURVE('',#53963,#53987,#53989,.T.); +#53987 = VERTEX_POINT('',#53988); +#53988 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#53989 = LINE('',#53990,#53991); +#53990 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#53991 = VECTOR('',#53992,1.); +#53992 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#53993 = ORIENTED_EDGE('',*,*,#53994,.T.); +#53994 = EDGE_CURVE('',#53987,#53995,#53997,.T.); +#53995 = VERTEX_POINT('',#53996); +#53996 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#53997 = LINE('',#53998,#53999); +#53998 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#53999 = VECTOR('',#54000,1.); +#54000 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54001 = ORIENTED_EDGE('',*,*,#54002,.T.); +#54002 = EDGE_CURVE('',#53995,#54003,#54005,.T.); +#54003 = VERTEX_POINT('',#54004); +#54004 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54005 = LINE('',#54006,#54007); +#54006 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#54007 = VECTOR('',#54008,1.); +#54008 = DIRECTION('',(0.,-1.,0.)); +#54009 = ORIENTED_EDGE('',*,*,#54010,.T.); +#54010 = EDGE_CURVE('',#54003,#54011,#54013,.T.); +#54011 = VERTEX_POINT('',#54012); +#54012 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54013 = LINE('',#54014,#54015); +#54014 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54015 = VECTOR('',#54016,1.); +#54016 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54017 = ORIENTED_EDGE('',*,*,#54018,.T.); +#54018 = EDGE_CURVE('',#54011,#54019,#54021,.T.); +#54019 = VERTEX_POINT('',#54020); +#54020 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54021 = LINE('',#54022,#54023); +#54022 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54023 = VECTOR('',#54024,1.); +#54024 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54025 = ORIENTED_EDGE('',*,*,#54026,.T.); +#54026 = EDGE_CURVE('',#54019,#54027,#54029,.T.); +#54027 = VERTEX_POINT('',#54028); +#54028 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54029 = LINE('',#54030,#54031); +#54030 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54031 = VECTOR('',#54032,1.); +#54032 = DIRECTION('',(0.,-1.,0.)); +#54033 = ORIENTED_EDGE('',*,*,#54034,.T.); +#54034 = EDGE_CURVE('',#54027,#54035,#54037,.T.); +#54035 = VERTEX_POINT('',#54036); +#54036 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54037 = LINE('',#54038,#54039); +#54038 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54039 = VECTOR('',#54040,1.); +#54040 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54041 = ORIENTED_EDGE('',*,*,#54042,.T.); +#54042 = EDGE_CURVE('',#54035,#54043,#54045,.T.); +#54043 = VERTEX_POINT('',#54044); +#54044 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54045 = LINE('',#54046,#54047); +#54046 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54047 = VECTOR('',#54048,1.); +#54048 = DIRECTION('',(1.,0.,0.)); +#54049 = ORIENTED_EDGE('',*,*,#54050,.T.); +#54050 = EDGE_CURVE('',#54043,#54051,#54053,.T.); +#54051 = VERTEX_POINT('',#54052); +#54052 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54053 = LINE('',#54054,#54055); +#54054 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54055 = VECTOR('',#54056,1.); +#54056 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54057 = ORIENTED_EDGE('',*,*,#54058,.T.); +#54058 = EDGE_CURVE('',#54051,#54059,#54061,.T.); +#54059 = VERTEX_POINT('',#54060); +#54060 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54061 = LINE('',#54062,#54063); +#54062 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54063 = VECTOR('',#54064,1.); +#54064 = DIRECTION('',(0.,1.,0.)); +#54065 = ORIENTED_EDGE('',*,*,#54066,.T.); +#54066 = EDGE_CURVE('',#54059,#54067,#54069,.T.); +#54067 = VERTEX_POINT('',#54068); +#54068 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54069 = LINE('',#54070,#54071); +#54070 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54071 = VECTOR('',#54072,1.); +#54072 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54073 = ORIENTED_EDGE('',*,*,#54074,.T.); +#54074 = EDGE_CURVE('',#54067,#54075,#54077,.T.); +#54075 = VERTEX_POINT('',#54076); +#54076 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54077 = LINE('',#54078,#54079); +#54078 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54079 = VECTOR('',#54080,1.); +#54080 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54081 = ORIENTED_EDGE('',*,*,#54082,.T.); +#54082 = EDGE_CURVE('',#54075,#54083,#54085,.T.); +#54083 = VERTEX_POINT('',#54084); +#54084 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54085 = LINE('',#54086,#54087); +#54086 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54087 = VECTOR('',#54088,1.); +#54088 = DIRECTION('',(0.,1.,0.)); +#54089 = ORIENTED_EDGE('',*,*,#54090,.T.); +#54090 = EDGE_CURVE('',#54083,#54091,#54093,.T.); +#54091 = VERTEX_POINT('',#54092); +#54092 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54093 = LINE('',#54094,#54095); +#54094 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54095 = VECTOR('',#54096,1.); +#54096 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54097 = ORIENTED_EDGE('',*,*,#54098,.T.); +#54098 = EDGE_CURVE('',#54091,#54099,#54101,.T.); +#54099 = VERTEX_POINT('',#54100); +#54100 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54101 = LINE('',#54102,#54103); +#54102 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54103 = VECTOR('',#54104,1.); +#54104 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54105 = ORIENTED_EDGE('',*,*,#54106,.T.); +#54106 = EDGE_CURVE('',#54099,#54107,#54109,.T.); +#54107 = VERTEX_POINT('',#54108); +#54108 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54109 = LINE('',#54110,#54111); +#54110 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54111 = VECTOR('',#54112,1.); +#54112 = DIRECTION('',(0.,1.,0.)); +#54113 = ORIENTED_EDGE('',*,*,#54114,.T.); +#54114 = EDGE_CURVE('',#54107,#53923,#54115,.T.); +#54115 = LINE('',#54116,#54117); +#54116 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54117 = VECTOR('',#54118,1.); +#54118 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54119 = ORIENTED_EDGE('',*,*,#53939,.T.); +#54120 = FACE_BOUND('',#54121,.F.); +#54121 = EDGE_LOOP('',(#54122,#54132,#54140,#54148)); +#54122 = ORIENTED_EDGE('',*,*,#54123,.F.); +#54123 = EDGE_CURVE('',#54124,#54126,#54128,.T.); +#54124 = VERTEX_POINT('',#54125); +#54125 = CARTESIAN_POINT('',(0.32,-0.32,0.)); +#54126 = VERTEX_POINT('',#54127); +#54127 = CARTESIAN_POINT('',(0.32,0.32,0.)); +#54128 = LINE('',#54129,#54130); +#54129 = CARTESIAN_POINT('',(0.32,-1.43,0.)); +#54130 = VECTOR('',#54131,1.); +#54131 = DIRECTION('',(0.,1.,0.)); +#54132 = ORIENTED_EDGE('',*,*,#54133,.T.); +#54133 = EDGE_CURVE('',#54124,#54134,#54136,.T.); +#54134 = VERTEX_POINT('',#54135); +#54135 = CARTESIAN_POINT('',(-0.32,-0.32,0.)); +#54136 = LINE('',#54137,#54138); +#54137 = CARTESIAN_POINT('',(-0.16,-0.32,0.)); +#54138 = VECTOR('',#54139,1.); +#54139 = DIRECTION('',(-1.,0.,0.)); +#54140 = ORIENTED_EDGE('',*,*,#54141,.T.); +#54141 = EDGE_CURVE('',#54134,#54142,#54144,.T.); +#54142 = VERTEX_POINT('',#54143); +#54143 = CARTESIAN_POINT('',(-0.32,0.32,0.)); +#54144 = LINE('',#54145,#54146); +#54145 = CARTESIAN_POINT('',(-0.32,-1.43,0.)); +#54146 = VECTOR('',#54147,1.); +#54147 = DIRECTION('',(0.,1.,0.)); +#54148 = ORIENTED_EDGE('',*,*,#54149,.F.); +#54149 = EDGE_CURVE('',#54126,#54142,#54150,.T.); +#54150 = LINE('',#54151,#54152); +#54151 = CARTESIAN_POINT('',(-0.16,0.32,0.)); +#54152 = VECTOR('',#54153,1.); +#54153 = DIRECTION('',(-1.,0.,0.)); +#54154 = FACE_BOUND('',#54155,.F.); +#54155 = EDGE_LOOP('',(#54156,#54166,#54174,#54182)); +#54156 = ORIENTED_EDGE('',*,*,#54157,.T.); +#54157 = EDGE_CURVE('',#54158,#54160,#54162,.T.); +#54158 = VERTEX_POINT('',#54159); +#54159 = CARTESIAN_POINT('',(0.32,-2.86,0.)); +#54160 = VERTEX_POINT('',#54161); +#54161 = CARTESIAN_POINT('',(-0.32,-2.86,0.)); +#54162 = LINE('',#54163,#54164); +#54163 = CARTESIAN_POINT('',(-0.16,-2.86,0.)); +#54164 = VECTOR('',#54165,1.); +#54165 = DIRECTION('',(-1.,0.,0.)); +#54166 = ORIENTED_EDGE('',*,*,#54167,.T.); +#54167 = EDGE_CURVE('',#54160,#54168,#54170,.T.); +#54168 = VERTEX_POINT('',#54169); +#54169 = CARTESIAN_POINT('',(-0.32,-2.22,0.)); +#54170 = LINE('',#54171,#54172); +#54171 = CARTESIAN_POINT('',(-0.32,-2.7,0.)); +#54172 = VECTOR('',#54173,1.); +#54173 = DIRECTION('',(0.,1.,0.)); +#54174 = ORIENTED_EDGE('',*,*,#54175,.F.); +#54175 = EDGE_CURVE('',#54176,#54168,#54178,.T.); +#54176 = VERTEX_POINT('',#54177); +#54177 = CARTESIAN_POINT('',(0.32,-2.22,0.)); +#54178 = LINE('',#54179,#54180); +#54179 = CARTESIAN_POINT('',(-0.16,-2.22,0.)); +#54180 = VECTOR('',#54181,1.); +#54181 = DIRECTION('',(-1.,0.,0.)); +#54182 = ORIENTED_EDGE('',*,*,#54183,.F.); +#54183 = EDGE_CURVE('',#54158,#54176,#54184,.T.); +#54184 = LINE('',#54185,#54186); +#54185 = CARTESIAN_POINT('',(0.32,-2.7,0.)); +#54186 = VECTOR('',#54187,1.); +#54187 = DIRECTION('',(0.,1.,0.)); +#54188 = FACE_BOUND('',#54189,.F.); +#54189 = EDGE_LOOP('',(#54190,#54200,#54208,#54216)); +#54190 = ORIENTED_EDGE('',*,*,#54191,.F.); +#54191 = EDGE_CURVE('',#54192,#54194,#54196,.T.); +#54192 = VERTEX_POINT('',#54193); +#54193 = CARTESIAN_POINT('',(0.32,-4.76,0.)); +#54194 = VERTEX_POINT('',#54195); +#54195 = CARTESIAN_POINT('',(-0.32,-4.76,0.)); +#54196 = LINE('',#54197,#54198); +#54197 = CARTESIAN_POINT('',(-0.16,-4.76,0.)); +#54198 = VECTOR('',#54199,1.); +#54199 = DIRECTION('',(-1.,0.,0.)); +#54200 = ORIENTED_EDGE('',*,*,#54201,.F.); +#54201 = EDGE_CURVE('',#54202,#54192,#54204,.T.); +#54202 = VERTEX_POINT('',#54203); +#54203 = CARTESIAN_POINT('',(0.32,-5.4,0.)); +#54204 = LINE('',#54205,#54206); +#54205 = CARTESIAN_POINT('',(0.32,-3.97,0.)); +#54206 = VECTOR('',#54207,1.); +#54207 = DIRECTION('',(0.,1.,0.)); +#54208 = ORIENTED_EDGE('',*,*,#54209,.T.); +#54209 = EDGE_CURVE('',#54202,#54210,#54212,.T.); +#54210 = VERTEX_POINT('',#54211); +#54211 = CARTESIAN_POINT('',(-0.32,-5.4,0.)); +#54212 = LINE('',#54213,#54214); +#54213 = CARTESIAN_POINT('',(-0.16,-5.4,0.)); +#54214 = VECTOR('',#54215,1.); +#54215 = DIRECTION('',(-1.,0.,0.)); +#54216 = ORIENTED_EDGE('',*,*,#54217,.T.); +#54217 = EDGE_CURVE('',#54210,#54194,#54218,.T.); +#54218 = LINE('',#54219,#54220); +#54219 = CARTESIAN_POINT('',(-0.32,-3.97,0.)); +#54220 = VECTOR('',#54221,1.); +#54221 = DIRECTION('',(0.,1.,0.)); +#54222 = PLANE('',#54223); +#54223 = AXIS2_PLACEMENT_3D('',#54224,#54225,#54226); +#54224 = CARTESIAN_POINT('',(5.398204781459E-17,-2.54,0.)); +#54225 = DIRECTION('',(0.,0.,1.)); +#54226 = DIRECTION('',(1.,0.,-0.)); +#54227 = ADVANCED_FACE('',(#54228,#54367,#54401,#54435),#54469,.T.); +#54228 = FACE_BOUND('',#54229,.T.); +#54229 = EDGE_LOOP('',(#54230,#54231,#54232,#54240,#54248,#54256,#54264, + #54272,#54280,#54288,#54296,#54304,#54312,#54320,#54328,#54336, + #54344,#54352,#54360,#54366)); +#54230 = ORIENTED_EDGE('',*,*,#53892,.T.); +#54231 = ORIENTED_EDGE('',*,*,#53954,.T.); +#54232 = ORIENTED_EDGE('',*,*,#54233,.T.); +#54233 = EDGE_CURVE('',#53955,#54234,#54236,.T.); +#54234 = VERTEX_POINT('',#54235); +#54235 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#54236 = LINE('',#54237,#54238); +#54237 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#54238 = VECTOR('',#54239,1.); +#54239 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54240 = ORIENTED_EDGE('',*,*,#54241,.T.); +#54241 = EDGE_CURVE('',#54234,#54242,#54244,.T.); +#54242 = VERTEX_POINT('',#54243); +#54243 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#54244 = LINE('',#54245,#54246); +#54245 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#54246 = VECTOR('',#54247,1.); +#54247 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54248 = ORIENTED_EDGE('',*,*,#54249,.T.); +#54249 = EDGE_CURVE('',#54242,#54250,#54252,.T.); +#54250 = VERTEX_POINT('',#54251); +#54251 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#54252 = LINE('',#54253,#54254); +#54253 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#54254 = VECTOR('',#54255,1.); +#54255 = DIRECTION('',(0.,-1.,0.)); +#54256 = ORIENTED_EDGE('',*,*,#54257,.T.); +#54257 = EDGE_CURVE('',#54250,#54258,#54260,.T.); +#54258 = VERTEX_POINT('',#54259); +#54259 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#54260 = LINE('',#54261,#54262); +#54261 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#54262 = VECTOR('',#54263,1.); +#54263 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54264 = ORIENTED_EDGE('',*,*,#54265,.T.); +#54265 = EDGE_CURVE('',#54258,#54266,#54268,.T.); +#54266 = VERTEX_POINT('',#54267); +#54267 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#54268 = LINE('',#54269,#54270); +#54269 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#54270 = VECTOR('',#54271,1.); +#54271 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54272 = ORIENTED_EDGE('',*,*,#54273,.T.); +#54273 = EDGE_CURVE('',#54266,#54274,#54276,.T.); +#54274 = VERTEX_POINT('',#54275); +#54275 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#54276 = LINE('',#54277,#54278); +#54277 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#54278 = VECTOR('',#54279,1.); +#54279 = DIRECTION('',(0.,-1.,0.)); +#54280 = ORIENTED_EDGE('',*,*,#54281,.T.); +#54281 = EDGE_CURVE('',#54274,#54282,#54284,.T.); +#54282 = VERTEX_POINT('',#54283); +#54283 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#54284 = LINE('',#54285,#54286); +#54285 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#54286 = VECTOR('',#54287,1.); +#54287 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54288 = ORIENTED_EDGE('',*,*,#54289,.T.); +#54289 = EDGE_CURVE('',#54282,#54290,#54292,.T.); +#54290 = VERTEX_POINT('',#54291); +#54291 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#54292 = LINE('',#54293,#54294); +#54293 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#54294 = VECTOR('',#54295,1.); +#54295 = DIRECTION('',(1.,0.,0.)); +#54296 = ORIENTED_EDGE('',*,*,#54297,.T.); +#54297 = EDGE_CURVE('',#54290,#54298,#54300,.T.); +#54298 = VERTEX_POINT('',#54299); +#54299 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#54300 = LINE('',#54301,#54302); +#54301 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#54302 = VECTOR('',#54303,1.); +#54303 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54304 = ORIENTED_EDGE('',*,*,#54305,.T.); +#54305 = EDGE_CURVE('',#54298,#54306,#54308,.T.); +#54306 = VERTEX_POINT('',#54307); +#54307 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#54308 = LINE('',#54309,#54310); +#54309 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#54310 = VECTOR('',#54311,1.); +#54311 = DIRECTION('',(0.,1.,0.)); +#54312 = ORIENTED_EDGE('',*,*,#54313,.T.); +#54313 = EDGE_CURVE('',#54306,#54314,#54316,.T.); +#54314 = VERTEX_POINT('',#54315); +#54315 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#54316 = LINE('',#54317,#54318); +#54317 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#54318 = VECTOR('',#54319,1.); +#54319 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54320 = ORIENTED_EDGE('',*,*,#54321,.T.); +#54321 = EDGE_CURVE('',#54314,#54322,#54324,.T.); +#54322 = VERTEX_POINT('',#54323); +#54323 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#54324 = LINE('',#54325,#54326); +#54325 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#54326 = VECTOR('',#54327,1.); +#54327 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54328 = ORIENTED_EDGE('',*,*,#54329,.T.); +#54329 = EDGE_CURVE('',#54322,#54330,#54332,.T.); +#54330 = VERTEX_POINT('',#54331); +#54331 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#54332 = LINE('',#54333,#54334); +#54333 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#54334 = VECTOR('',#54335,1.); +#54335 = DIRECTION('',(0.,1.,0.)); +#54336 = ORIENTED_EDGE('',*,*,#54337,.T.); +#54337 = EDGE_CURVE('',#54330,#54338,#54340,.T.); +#54338 = VERTEX_POINT('',#54339); +#54339 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#54340 = LINE('',#54341,#54342); +#54341 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#54342 = VECTOR('',#54343,1.); +#54343 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54344 = ORIENTED_EDGE('',*,*,#54345,.T.); +#54345 = EDGE_CURVE('',#54338,#54346,#54348,.T.); +#54346 = VERTEX_POINT('',#54347); +#54347 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#54348 = LINE('',#54349,#54350); +#54349 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#54350 = VECTOR('',#54351,1.); +#54351 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54352 = ORIENTED_EDGE('',*,*,#54353,.T.); +#54353 = EDGE_CURVE('',#54346,#54354,#54356,.T.); +#54354 = VERTEX_POINT('',#54355); +#54355 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#54356 = LINE('',#54357,#54358); +#54357 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#54358 = VECTOR('',#54359,1.); +#54359 = DIRECTION('',(0.,1.,0.)); +#54360 = ORIENTED_EDGE('',*,*,#54361,.T.); +#54361 = EDGE_CURVE('',#54354,#53925,#54362,.T.); +#54362 = LINE('',#54363,#54364); +#54363 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#54364 = VECTOR('',#54365,1.); +#54365 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54366 = ORIENTED_EDGE('',*,*,#53932,.T.); +#54367 = FACE_BOUND('',#54368,.T.); +#54368 = EDGE_LOOP('',(#54369,#54379,#54387,#54395)); +#54369 = ORIENTED_EDGE('',*,*,#54370,.F.); +#54370 = EDGE_CURVE('',#54371,#54373,#54375,.T.); +#54371 = VERTEX_POINT('',#54372); +#54372 = CARTESIAN_POINT('',(0.32,-0.32,2.54)); +#54373 = VERTEX_POINT('',#54374); +#54374 = CARTESIAN_POINT('',(0.32,0.32,2.54)); +#54375 = LINE('',#54376,#54377); +#54376 = CARTESIAN_POINT('',(0.32,-1.43,2.54)); +#54377 = VECTOR('',#54378,1.); +#54378 = DIRECTION('',(0.,1.,0.)); +#54379 = ORIENTED_EDGE('',*,*,#54380,.T.); +#54380 = EDGE_CURVE('',#54371,#54381,#54383,.T.); +#54381 = VERTEX_POINT('',#54382); +#54382 = CARTESIAN_POINT('',(-0.32,-0.32,2.54)); +#54383 = LINE('',#54384,#54385); +#54384 = CARTESIAN_POINT('',(-0.16,-0.32,2.54)); +#54385 = VECTOR('',#54386,1.); +#54386 = DIRECTION('',(-1.,0.,0.)); +#54387 = ORIENTED_EDGE('',*,*,#54388,.T.); +#54388 = EDGE_CURVE('',#54381,#54389,#54391,.T.); +#54389 = VERTEX_POINT('',#54390); +#54390 = CARTESIAN_POINT('',(-0.32,0.32,2.54)); +#54391 = LINE('',#54392,#54393); +#54392 = CARTESIAN_POINT('',(-0.32,-1.43,2.54)); +#54393 = VECTOR('',#54394,1.); +#54394 = DIRECTION('',(0.,1.,0.)); +#54395 = ORIENTED_EDGE('',*,*,#54396,.F.); +#54396 = EDGE_CURVE('',#54373,#54389,#54397,.T.); +#54397 = LINE('',#54398,#54399); +#54398 = CARTESIAN_POINT('',(-0.16,0.32,2.54)); +#54399 = VECTOR('',#54400,1.); +#54400 = DIRECTION('',(-1.,0.,0.)); +#54401 = FACE_BOUND('',#54402,.T.); +#54402 = EDGE_LOOP('',(#54403,#54413,#54421,#54429)); +#54403 = ORIENTED_EDGE('',*,*,#54404,.T.); +#54404 = EDGE_CURVE('',#54405,#54407,#54409,.T.); +#54405 = VERTEX_POINT('',#54406); +#54406 = CARTESIAN_POINT('',(0.32,-2.86,2.54)); +#54407 = VERTEX_POINT('',#54408); +#54408 = CARTESIAN_POINT('',(-0.32,-2.86,2.54)); +#54409 = LINE('',#54410,#54411); +#54410 = CARTESIAN_POINT('',(-0.16,-2.86,2.54)); +#54411 = VECTOR('',#54412,1.); +#54412 = DIRECTION('',(-1.,0.,0.)); +#54413 = ORIENTED_EDGE('',*,*,#54414,.T.); +#54414 = EDGE_CURVE('',#54407,#54415,#54417,.T.); +#54415 = VERTEX_POINT('',#54416); +#54416 = CARTESIAN_POINT('',(-0.32,-2.22,2.54)); +#54417 = LINE('',#54418,#54419); +#54418 = CARTESIAN_POINT('',(-0.32,-2.7,2.54)); +#54419 = VECTOR('',#54420,1.); +#54420 = DIRECTION('',(0.,1.,0.)); +#54421 = ORIENTED_EDGE('',*,*,#54422,.F.); +#54422 = EDGE_CURVE('',#54423,#54415,#54425,.T.); +#54423 = VERTEX_POINT('',#54424); +#54424 = CARTESIAN_POINT('',(0.32,-2.22,2.54)); +#54425 = LINE('',#54426,#54427); +#54426 = CARTESIAN_POINT('',(-0.16,-2.22,2.54)); +#54427 = VECTOR('',#54428,1.); +#54428 = DIRECTION('',(-1.,0.,0.)); +#54429 = ORIENTED_EDGE('',*,*,#54430,.F.); +#54430 = EDGE_CURVE('',#54405,#54423,#54431,.T.); +#54431 = LINE('',#54432,#54433); +#54432 = CARTESIAN_POINT('',(0.32,-2.7,2.54)); +#54433 = VECTOR('',#54434,1.); +#54434 = DIRECTION('',(0.,1.,0.)); +#54435 = FACE_BOUND('',#54436,.T.); +#54436 = EDGE_LOOP('',(#54437,#54447,#54455,#54463)); +#54437 = ORIENTED_EDGE('',*,*,#54438,.F.); +#54438 = EDGE_CURVE('',#54439,#54441,#54443,.T.); +#54439 = VERTEX_POINT('',#54440); +#54440 = CARTESIAN_POINT('',(0.32,-4.76,2.54)); +#54441 = VERTEX_POINT('',#54442); +#54442 = CARTESIAN_POINT('',(-0.32,-4.76,2.54)); +#54443 = LINE('',#54444,#54445); +#54444 = CARTESIAN_POINT('',(-0.16,-4.76,2.54)); +#54445 = VECTOR('',#54446,1.); +#54446 = DIRECTION('',(-1.,0.,0.)); +#54447 = ORIENTED_EDGE('',*,*,#54448,.F.); +#54448 = EDGE_CURVE('',#54449,#54439,#54451,.T.); +#54449 = VERTEX_POINT('',#54450); +#54450 = CARTESIAN_POINT('',(0.32,-5.4,2.54)); +#54451 = LINE('',#54452,#54453); +#54452 = CARTESIAN_POINT('',(0.32,-3.97,2.54)); +#54453 = VECTOR('',#54454,1.); +#54454 = DIRECTION('',(0.,1.,0.)); +#54455 = ORIENTED_EDGE('',*,*,#54456,.T.); +#54456 = EDGE_CURVE('',#54449,#54457,#54459,.T.); +#54457 = VERTEX_POINT('',#54458); +#54458 = CARTESIAN_POINT('',(-0.32,-5.4,2.54)); +#54459 = LINE('',#54460,#54461); +#54460 = CARTESIAN_POINT('',(-0.16,-5.4,2.54)); +#54461 = VECTOR('',#54462,1.); +#54462 = DIRECTION('',(-1.,0.,0.)); +#54463 = ORIENTED_EDGE('',*,*,#54464,.T.); +#54464 = EDGE_CURVE('',#54457,#54441,#54465,.T.); +#54465 = LINE('',#54466,#54467); +#54466 = CARTESIAN_POINT('',(-0.32,-3.97,2.54)); +#54467 = VECTOR('',#54468,1.); +#54468 = DIRECTION('',(0.,1.,0.)); +#54469 = PLANE('',#54470); +#54470 = AXIS2_PLACEMENT_3D('',#54471,#54472,#54473); +#54471 = CARTESIAN_POINT('',(5.398204781459E-17,-2.54,2.54)); +#54472 = DIRECTION('',(0.,0.,1.)); +#54473 = DIRECTION('',(1.,0.,-0.)); +#54474 = ADVANCED_FACE('',(#54475),#54486,.F.); +#54475 = FACE_BOUND('',#54476,.F.); +#54476 = EDGE_LOOP('',(#54477,#54483,#54484,#54485)); +#54477 = ORIENTED_EDGE('',*,*,#54478,.T.); +#54478 = EDGE_CURVE('',#54107,#54354,#54479,.T.); +#54479 = LINE('',#54480,#54481); +#54480 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54481 = VECTOR('',#54482,1.); +#54482 = DIRECTION('',(0.,0.,1.)); +#54483 = ORIENTED_EDGE('',*,*,#54361,.T.); +#54484 = ORIENTED_EDGE('',*,*,#53922,.F.); +#54485 = ORIENTED_EDGE('',*,*,#54114,.F.); +#54486 = PLANE('',#54487); +#54487 = AXIS2_PLACEMENT_3D('',#54488,#54489,#54490); +#54488 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#54489 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54490 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54491 = ADVANCED_FACE('',(#54492),#54503,.F.); +#54492 = FACE_BOUND('',#54493,.F.); +#54493 = EDGE_LOOP('',(#54494,#54495,#54496,#54502)); +#54494 = ORIENTED_EDGE('',*,*,#53962,.T.); +#54495 = ORIENTED_EDGE('',*,*,#54233,.T.); +#54496 = ORIENTED_EDGE('',*,*,#54497,.F.); +#54497 = EDGE_CURVE('',#53987,#54234,#54498,.T.); +#54498 = LINE('',#54499,#54500); +#54499 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#54500 = VECTOR('',#54501,1.); +#54501 = DIRECTION('',(0.,0.,1.)); +#54502 = ORIENTED_EDGE('',*,*,#53986,.F.); +#54503 = PLANE('',#54504); +#54504 = AXIS2_PLACEMENT_3D('',#54505,#54506,#54507); +#54505 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#54506 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54507 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54508 = ADVANCED_FACE('',(#54509),#54520,.F.); +#54509 = FACE_BOUND('',#54510,.F.); +#54510 = EDGE_LOOP('',(#54511,#54517,#54518,#54519)); +#54511 = ORIENTED_EDGE('',*,*,#54512,.T.); +#54512 = EDGE_CURVE('',#54099,#54346,#54513,.T.); +#54513 = LINE('',#54514,#54515); +#54514 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54515 = VECTOR('',#54516,1.); +#54516 = DIRECTION('',(0.,0.,1.)); +#54517 = ORIENTED_EDGE('',*,*,#54353,.T.); +#54518 = ORIENTED_EDGE('',*,*,#54478,.F.); +#54519 = ORIENTED_EDGE('',*,*,#54106,.F.); +#54520 = PLANE('',#54521); +#54521 = AXIS2_PLACEMENT_3D('',#54522,#54523,#54524); +#54522 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#54523 = DIRECTION('',(-1.,0.,0.)); +#54524 = DIRECTION('',(0.,1.,0.)); +#54525 = ADVANCED_FACE('',(#54526),#54537,.F.); +#54526 = FACE_BOUND('',#54527,.F.); +#54527 = EDGE_LOOP('',(#54528,#54529,#54530,#54536)); +#54528 = ORIENTED_EDGE('',*,*,#54497,.T.); +#54529 = ORIENTED_EDGE('',*,*,#54241,.T.); +#54530 = ORIENTED_EDGE('',*,*,#54531,.F.); +#54531 = EDGE_CURVE('',#53995,#54242,#54532,.T.); +#54532 = LINE('',#54533,#54534); +#54533 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#54534 = VECTOR('',#54535,1.); +#54535 = DIRECTION('',(0.,0.,1.)); +#54536 = ORIENTED_EDGE('',*,*,#53994,.F.); +#54537 = PLANE('',#54538); +#54538 = AXIS2_PLACEMENT_3D('',#54539,#54540,#54541); +#54539 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#54540 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54541 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54542 = ADVANCED_FACE('',(#54543),#54554,.F.); +#54543 = FACE_BOUND('',#54544,.F.); +#54544 = EDGE_LOOP('',(#54545,#54551,#54552,#54553)); +#54545 = ORIENTED_EDGE('',*,*,#54546,.T.); +#54546 = EDGE_CURVE('',#54091,#54338,#54547,.T.); +#54547 = LINE('',#54548,#54549); +#54548 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54549 = VECTOR('',#54550,1.); +#54550 = DIRECTION('',(0.,0.,1.)); +#54551 = ORIENTED_EDGE('',*,*,#54345,.T.); +#54552 = ORIENTED_EDGE('',*,*,#54512,.F.); +#54553 = ORIENTED_EDGE('',*,*,#54098,.F.); +#54554 = PLANE('',#54555); +#54555 = AXIS2_PLACEMENT_3D('',#54556,#54557,#54558); +#54556 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#54557 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54558 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54559 = ADVANCED_FACE('',(#54560),#54571,.F.); +#54560 = FACE_BOUND('',#54561,.F.); +#54561 = EDGE_LOOP('',(#54562,#54563,#54564,#54570)); +#54562 = ORIENTED_EDGE('',*,*,#54531,.T.); +#54563 = ORIENTED_EDGE('',*,*,#54249,.T.); +#54564 = ORIENTED_EDGE('',*,*,#54565,.F.); +#54565 = EDGE_CURVE('',#54003,#54250,#54566,.T.); +#54566 = LINE('',#54567,#54568); +#54567 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54568 = VECTOR('',#54569,1.); +#54569 = DIRECTION('',(0.,0.,1.)); +#54570 = ORIENTED_EDGE('',*,*,#54002,.F.); +#54571 = PLANE('',#54572); +#54572 = AXIS2_PLACEMENT_3D('',#54573,#54574,#54575); +#54573 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#54574 = DIRECTION('',(1.,0.,0.)); +#54575 = DIRECTION('',(0.,-1.,0.)); +#54576 = ADVANCED_FACE('',(#54577),#54588,.F.); +#54577 = FACE_BOUND('',#54578,.F.); +#54578 = EDGE_LOOP('',(#54579,#54585,#54586,#54587)); +#54579 = ORIENTED_EDGE('',*,*,#54580,.T.); +#54580 = EDGE_CURVE('',#54083,#54330,#54581,.T.); +#54581 = LINE('',#54582,#54583); +#54582 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54583 = VECTOR('',#54584,1.); +#54584 = DIRECTION('',(0.,0.,1.)); +#54585 = ORIENTED_EDGE('',*,*,#54337,.T.); +#54586 = ORIENTED_EDGE('',*,*,#54546,.F.); +#54587 = ORIENTED_EDGE('',*,*,#54090,.F.); +#54588 = PLANE('',#54589); +#54589 = AXIS2_PLACEMENT_3D('',#54590,#54591,#54592); +#54590 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#54591 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54592 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54593 = ADVANCED_FACE('',(#54594),#54605,.F.); +#54594 = FACE_BOUND('',#54595,.F.); +#54595 = EDGE_LOOP('',(#54596,#54597,#54598,#54604)); +#54596 = ORIENTED_EDGE('',*,*,#54565,.T.); +#54597 = ORIENTED_EDGE('',*,*,#54257,.T.); +#54598 = ORIENTED_EDGE('',*,*,#54599,.F.); +#54599 = EDGE_CURVE('',#54011,#54258,#54600,.T.); +#54600 = LINE('',#54601,#54602); +#54601 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54602 = VECTOR('',#54603,1.); +#54603 = DIRECTION('',(0.,0.,1.)); +#54604 = ORIENTED_EDGE('',*,*,#54010,.F.); +#54605 = PLANE('',#54606); +#54606 = AXIS2_PLACEMENT_3D('',#54607,#54608,#54609); +#54607 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#54608 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54609 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54610 = ADVANCED_FACE('',(#54611),#54622,.F.); +#54611 = FACE_BOUND('',#54612,.F.); +#54612 = EDGE_LOOP('',(#54613,#54619,#54620,#54621)); +#54613 = ORIENTED_EDGE('',*,*,#54614,.T.); +#54614 = EDGE_CURVE('',#54075,#54322,#54615,.T.); +#54615 = LINE('',#54616,#54617); +#54616 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54617 = VECTOR('',#54618,1.); +#54618 = DIRECTION('',(0.,0.,1.)); +#54619 = ORIENTED_EDGE('',*,*,#54329,.T.); +#54620 = ORIENTED_EDGE('',*,*,#54580,.F.); +#54621 = ORIENTED_EDGE('',*,*,#54082,.F.); +#54622 = PLANE('',#54623); +#54623 = AXIS2_PLACEMENT_3D('',#54624,#54625,#54626); +#54624 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#54625 = DIRECTION('',(-1.,0.,0.)); +#54626 = DIRECTION('',(0.,1.,0.)); +#54627 = ADVANCED_FACE('',(#54628),#54639,.F.); +#54628 = FACE_BOUND('',#54629,.F.); +#54629 = EDGE_LOOP('',(#54630,#54631,#54632,#54638)); +#54630 = ORIENTED_EDGE('',*,*,#54599,.T.); +#54631 = ORIENTED_EDGE('',*,*,#54265,.T.); +#54632 = ORIENTED_EDGE('',*,*,#54633,.F.); +#54633 = EDGE_CURVE('',#54019,#54266,#54634,.T.); +#54634 = LINE('',#54635,#54636); +#54635 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54636 = VECTOR('',#54637,1.); +#54637 = DIRECTION('',(0.,0.,1.)); +#54638 = ORIENTED_EDGE('',*,*,#54018,.F.); +#54639 = PLANE('',#54640); +#54640 = AXIS2_PLACEMENT_3D('',#54641,#54642,#54643); +#54641 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#54642 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54643 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54644 = ADVANCED_FACE('',(#54645),#54656,.F.); +#54645 = FACE_BOUND('',#54646,.F.); +#54646 = EDGE_LOOP('',(#54647,#54653,#54654,#54655)); +#54647 = ORIENTED_EDGE('',*,*,#54648,.T.); +#54648 = EDGE_CURVE('',#54067,#54314,#54649,.T.); +#54649 = LINE('',#54650,#54651); +#54650 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54651 = VECTOR('',#54652,1.); +#54652 = DIRECTION('',(0.,0.,1.)); +#54653 = ORIENTED_EDGE('',*,*,#54321,.T.); +#54654 = ORIENTED_EDGE('',*,*,#54614,.F.); +#54655 = ORIENTED_EDGE('',*,*,#54074,.F.); +#54656 = PLANE('',#54657); +#54657 = AXIS2_PLACEMENT_3D('',#54658,#54659,#54660); +#54658 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#54659 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54660 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54661 = ADVANCED_FACE('',(#54662),#54673,.F.); +#54662 = FACE_BOUND('',#54663,.F.); +#54663 = EDGE_LOOP('',(#54664,#54665,#54666,#54672)); +#54664 = ORIENTED_EDGE('',*,*,#54633,.T.); +#54665 = ORIENTED_EDGE('',*,*,#54273,.T.); +#54666 = ORIENTED_EDGE('',*,*,#54667,.F.); +#54667 = EDGE_CURVE('',#54027,#54274,#54668,.T.); +#54668 = LINE('',#54669,#54670); +#54669 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54670 = VECTOR('',#54671,1.); +#54671 = DIRECTION('',(0.,0.,1.)); +#54672 = ORIENTED_EDGE('',*,*,#54026,.F.); +#54673 = PLANE('',#54674); +#54674 = AXIS2_PLACEMENT_3D('',#54675,#54676,#54677); +#54675 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#54676 = DIRECTION('',(1.,0.,0.)); +#54677 = DIRECTION('',(0.,-1.,0.)); +#54678 = ADVANCED_FACE('',(#54679),#54690,.F.); +#54679 = FACE_BOUND('',#54680,.F.); +#54680 = EDGE_LOOP('',(#54681,#54687,#54688,#54689)); +#54681 = ORIENTED_EDGE('',*,*,#54682,.T.); +#54682 = EDGE_CURVE('',#54059,#54306,#54683,.T.); +#54683 = LINE('',#54684,#54685); +#54684 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54685 = VECTOR('',#54686,1.); +#54686 = DIRECTION('',(0.,0.,1.)); +#54687 = ORIENTED_EDGE('',*,*,#54313,.T.); +#54688 = ORIENTED_EDGE('',*,*,#54648,.F.); +#54689 = ORIENTED_EDGE('',*,*,#54066,.F.); +#54690 = PLANE('',#54691); +#54691 = AXIS2_PLACEMENT_3D('',#54692,#54693,#54694); +#54692 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#54693 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54694 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54695 = ADVANCED_FACE('',(#54696),#54707,.F.); +#54696 = FACE_BOUND('',#54697,.F.); +#54697 = EDGE_LOOP('',(#54698,#54699,#54700,#54706)); +#54698 = ORIENTED_EDGE('',*,*,#54667,.T.); +#54699 = ORIENTED_EDGE('',*,*,#54281,.T.); +#54700 = ORIENTED_EDGE('',*,*,#54701,.F.); +#54701 = EDGE_CURVE('',#54035,#54282,#54702,.T.); +#54702 = LINE('',#54703,#54704); +#54703 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54704 = VECTOR('',#54705,1.); +#54705 = DIRECTION('',(0.,0.,1.)); +#54706 = ORIENTED_EDGE('',*,*,#54034,.F.); +#54707 = PLANE('',#54708); +#54708 = AXIS2_PLACEMENT_3D('',#54709,#54710,#54711); +#54709 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#54710 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54711 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54712 = ADVANCED_FACE('',(#54713),#54724,.F.); +#54713 = FACE_BOUND('',#54714,.F.); +#54714 = EDGE_LOOP('',(#54715,#54721,#54722,#54723)); +#54715 = ORIENTED_EDGE('',*,*,#54716,.T.); +#54716 = EDGE_CURVE('',#54051,#54298,#54717,.T.); +#54717 = LINE('',#54718,#54719); +#54718 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54719 = VECTOR('',#54720,1.); +#54720 = DIRECTION('',(0.,0.,1.)); +#54721 = ORIENTED_EDGE('',*,*,#54305,.T.); +#54722 = ORIENTED_EDGE('',*,*,#54682,.F.); +#54723 = ORIENTED_EDGE('',*,*,#54058,.F.); +#54724 = PLANE('',#54725); +#54725 = AXIS2_PLACEMENT_3D('',#54726,#54727,#54728); +#54726 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#54727 = DIRECTION('',(-1.,0.,0.)); +#54728 = DIRECTION('',(0.,1.,0.)); +#54729 = ADVANCED_FACE('',(#54730),#54741,.F.); +#54730 = FACE_BOUND('',#54731,.F.); +#54731 = EDGE_LOOP('',(#54732,#54733,#54734,#54740)); +#54732 = ORIENTED_EDGE('',*,*,#54701,.T.); +#54733 = ORIENTED_EDGE('',*,*,#54289,.T.); +#54734 = ORIENTED_EDGE('',*,*,#54735,.F.); +#54735 = EDGE_CURVE('',#54043,#54290,#54736,.T.); +#54736 = LINE('',#54737,#54738); +#54737 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54738 = VECTOR('',#54739,1.); +#54739 = DIRECTION('',(0.,0.,1.)); +#54740 = ORIENTED_EDGE('',*,*,#54042,.F.); +#54741 = PLANE('',#54742); +#54742 = AXIS2_PLACEMENT_3D('',#54743,#54744,#54745); +#54743 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#54744 = DIRECTION('',(0.,1.,0.)); +#54745 = DIRECTION('',(1.,0.,0.)); +#54746 = ADVANCED_FACE('',(#54747),#54753,.F.); +#54747 = FACE_BOUND('',#54748,.F.); +#54748 = EDGE_LOOP('',(#54749,#54750,#54751,#54752)); +#54749 = ORIENTED_EDGE('',*,*,#54735,.T.); +#54750 = ORIENTED_EDGE('',*,*,#54297,.T.); +#54751 = ORIENTED_EDGE('',*,*,#54716,.F.); +#54752 = ORIENTED_EDGE('',*,*,#54050,.F.); +#54753 = PLANE('',#54754); +#54754 = AXIS2_PLACEMENT_3D('',#54755,#54756,#54757); +#54755 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#54756 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54757 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54758 = ADVANCED_FACE('',(#54759),#54784,.T.); +#54759 = FACE_BOUND('',#54760,.T.); +#54760 = EDGE_LOOP('',(#54761,#54769,#54777,#54783)); +#54761 = ORIENTED_EDGE('',*,*,#54762,.F.); +#54762 = EDGE_CURVE('',#54763,#54124,#54765,.T.); +#54763 = VERTEX_POINT('',#54764); +#54764 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#54765 = LINE('',#54766,#54767); +#54766 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#54767 = VECTOR('',#54768,1.); +#54768 = DIRECTION('',(0.,0.,1.)); +#54769 = ORIENTED_EDGE('',*,*,#54770,.T.); +#54770 = EDGE_CURVE('',#54763,#54771,#54773,.T.); +#54771 = VERTEX_POINT('',#54772); +#54772 = CARTESIAN_POINT('',(0.32,0.32,-2.84)); +#54773 = LINE('',#54774,#54775); +#54774 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#54775 = VECTOR('',#54776,1.); +#54776 = DIRECTION('',(0.,1.,0.)); +#54777 = ORIENTED_EDGE('',*,*,#54778,.T.); +#54778 = EDGE_CURVE('',#54771,#54126,#54779,.T.); +#54779 = LINE('',#54780,#54781); +#54780 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#54781 = VECTOR('',#54782,1.); +#54782 = DIRECTION('',(0.,0.,1.)); +#54783 = ORIENTED_EDGE('',*,*,#54123,.F.); +#54784 = PLANE('',#54785); +#54785 = AXIS2_PLACEMENT_3D('',#54786,#54787,#54788); +#54786 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#54787 = DIRECTION('',(1.,0.,0.)); +#54788 = DIRECTION('',(0.,0.,1.)); +#54789 = ADVANCED_FACE('',(#54790),#54808,.T.); +#54790 = FACE_BOUND('',#54791,.T.); +#54791 = EDGE_LOOP('',(#54792,#54793,#54801,#54807)); +#54792 = ORIENTED_EDGE('',*,*,#54778,.F.); +#54793 = ORIENTED_EDGE('',*,*,#54794,.F.); +#54794 = EDGE_CURVE('',#54795,#54771,#54797,.T.); +#54795 = VERTEX_POINT('',#54796); +#54796 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#54797 = LINE('',#54798,#54799); +#54798 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#54799 = VECTOR('',#54800,1.); +#54800 = DIRECTION('',(1.,0.,0.)); +#54801 = ORIENTED_EDGE('',*,*,#54802,.T.); +#54802 = EDGE_CURVE('',#54795,#54142,#54803,.T.); +#54803 = LINE('',#54804,#54805); +#54804 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#54805 = VECTOR('',#54806,1.); +#54806 = DIRECTION('',(0.,0.,1.)); +#54807 = ORIENTED_EDGE('',*,*,#54149,.F.); +#54808 = PLANE('',#54809); +#54809 = AXIS2_PLACEMENT_3D('',#54810,#54811,#54812); +#54810 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#54811 = DIRECTION('',(0.,1.,0.)); +#54812 = DIRECTION('',(0.,-0.,1.)); +#54813 = ADVANCED_FACE('',(#54814),#54832,.F.); +#54814 = FACE_BOUND('',#54815,.F.); +#54815 = EDGE_LOOP('',(#54816,#54824,#54830,#54831)); +#54816 = ORIENTED_EDGE('',*,*,#54817,.F.); +#54817 = EDGE_CURVE('',#54818,#54134,#54820,.T.); +#54818 = VERTEX_POINT('',#54819); +#54819 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#54820 = LINE('',#54821,#54822); +#54821 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#54822 = VECTOR('',#54823,1.); +#54823 = DIRECTION('',(0.,0.,1.)); +#54824 = ORIENTED_EDGE('',*,*,#54825,.T.); +#54825 = EDGE_CURVE('',#54818,#54795,#54826,.T.); +#54826 = LINE('',#54827,#54828); +#54827 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#54828 = VECTOR('',#54829,1.); +#54829 = DIRECTION('',(0.,1.,0.)); +#54830 = ORIENTED_EDGE('',*,*,#54802,.T.); +#54831 = ORIENTED_EDGE('',*,*,#54141,.F.); +#54832 = PLANE('',#54833); +#54833 = AXIS2_PLACEMENT_3D('',#54834,#54835,#54836); +#54834 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#54835 = DIRECTION('',(1.,0.,0.)); +#54836 = DIRECTION('',(0.,0.,1.)); +#54837 = ADVANCED_FACE('',(#54838),#54849,.F.); +#54838 = FACE_BOUND('',#54839,.F.); +#54839 = EDGE_LOOP('',(#54840,#54841,#54847,#54848)); +#54840 = ORIENTED_EDGE('',*,*,#54762,.F.); +#54841 = ORIENTED_EDGE('',*,*,#54842,.F.); +#54842 = EDGE_CURVE('',#54818,#54763,#54843,.T.); +#54843 = LINE('',#54844,#54845); +#54844 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#54845 = VECTOR('',#54846,1.); +#54846 = DIRECTION('',(1.,0.,0.)); +#54847 = ORIENTED_EDGE('',*,*,#54817,.T.); +#54848 = ORIENTED_EDGE('',*,*,#54133,.F.); +#54849 = PLANE('',#54850); +#54850 = AXIS2_PLACEMENT_3D('',#54851,#54852,#54853); +#54851 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#54852 = DIRECTION('',(0.,1.,0.)); +#54853 = DIRECTION('',(0.,-0.,1.)); +#54854 = ADVANCED_FACE('',(#54855),#54880,.F.); +#54855 = FACE_BOUND('',#54856,.F.); +#54856 = EDGE_LOOP('',(#54857,#54865,#54873,#54879)); +#54857 = ORIENTED_EDGE('',*,*,#54858,.F.); +#54858 = EDGE_CURVE('',#54859,#54158,#54861,.T.); +#54859 = VERTEX_POINT('',#54860); +#54860 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#54861 = LINE('',#54862,#54863); +#54862 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#54863 = VECTOR('',#54864,1.); +#54864 = DIRECTION('',(0.,0.,1.)); +#54865 = ORIENTED_EDGE('',*,*,#54866,.F.); +#54866 = EDGE_CURVE('',#54867,#54859,#54869,.T.); +#54867 = VERTEX_POINT('',#54868); +#54868 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#54869 = LINE('',#54870,#54871); +#54870 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#54871 = VECTOR('',#54872,1.); +#54872 = DIRECTION('',(1.,0.,0.)); +#54873 = ORIENTED_EDGE('',*,*,#54874,.T.); +#54874 = EDGE_CURVE('',#54867,#54160,#54875,.T.); +#54875 = LINE('',#54876,#54877); +#54876 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#54877 = VECTOR('',#54878,1.); +#54878 = DIRECTION('',(0.,0.,1.)); +#54879 = ORIENTED_EDGE('',*,*,#54157,.F.); +#54880 = PLANE('',#54881); +#54881 = AXIS2_PLACEMENT_3D('',#54882,#54883,#54884); +#54882 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#54883 = DIRECTION('',(0.,1.,0.)); +#54884 = DIRECTION('',(0.,-0.,1.)); +#54885 = ADVANCED_FACE('',(#54886),#54904,.T.); +#54886 = FACE_BOUND('',#54887,.T.); +#54887 = EDGE_LOOP('',(#54888,#54889,#54897,#54903)); +#54888 = ORIENTED_EDGE('',*,*,#54858,.F.); +#54889 = ORIENTED_EDGE('',*,*,#54890,.T.); +#54890 = EDGE_CURVE('',#54859,#54891,#54893,.T.); +#54891 = VERTEX_POINT('',#54892); +#54892 = CARTESIAN_POINT('',(0.32,-2.22,-2.84)); +#54893 = LINE('',#54894,#54895); +#54894 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#54895 = VECTOR('',#54896,1.); +#54896 = DIRECTION('',(0.,1.,0.)); +#54897 = ORIENTED_EDGE('',*,*,#54898,.T.); +#54898 = EDGE_CURVE('',#54891,#54176,#54899,.T.); +#54899 = LINE('',#54900,#54901); +#54900 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#54901 = VECTOR('',#54902,1.); +#54902 = DIRECTION('',(0.,0.,1.)); +#54903 = ORIENTED_EDGE('',*,*,#54183,.F.); +#54904 = PLANE('',#54905); +#54905 = AXIS2_PLACEMENT_3D('',#54906,#54907,#54908); +#54906 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#54907 = DIRECTION('',(1.,0.,0.)); +#54908 = DIRECTION('',(0.,0.,1.)); +#54909 = ADVANCED_FACE('',(#54910),#54928,.T.); +#54910 = FACE_BOUND('',#54911,.T.); +#54911 = EDGE_LOOP('',(#54912,#54913,#54921,#54927)); +#54912 = ORIENTED_EDGE('',*,*,#54898,.F.); +#54913 = ORIENTED_EDGE('',*,*,#54914,.F.); +#54914 = EDGE_CURVE('',#54915,#54891,#54917,.T.); +#54915 = VERTEX_POINT('',#54916); +#54916 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#54917 = LINE('',#54918,#54919); +#54918 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#54919 = VECTOR('',#54920,1.); +#54920 = DIRECTION('',(1.,0.,0.)); +#54921 = ORIENTED_EDGE('',*,*,#54922,.T.); +#54922 = EDGE_CURVE('',#54915,#54168,#54923,.T.); +#54923 = LINE('',#54924,#54925); +#54924 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#54925 = VECTOR('',#54926,1.); +#54926 = DIRECTION('',(0.,0.,1.)); +#54927 = ORIENTED_EDGE('',*,*,#54175,.F.); +#54928 = PLANE('',#54929); +#54929 = AXIS2_PLACEMENT_3D('',#54930,#54931,#54932); +#54930 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#54931 = DIRECTION('',(0.,1.,0.)); +#54932 = DIRECTION('',(0.,-0.,1.)); +#54933 = ADVANCED_FACE('',(#54934),#54945,.F.); +#54934 = FACE_BOUND('',#54935,.F.); +#54935 = EDGE_LOOP('',(#54936,#54937,#54943,#54944)); +#54936 = ORIENTED_EDGE('',*,*,#54874,.F.); +#54937 = ORIENTED_EDGE('',*,*,#54938,.T.); +#54938 = EDGE_CURVE('',#54867,#54915,#54939,.T.); +#54939 = LINE('',#54940,#54941); +#54940 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#54941 = VECTOR('',#54942,1.); +#54942 = DIRECTION('',(0.,1.,0.)); +#54943 = ORIENTED_EDGE('',*,*,#54922,.T.); +#54944 = ORIENTED_EDGE('',*,*,#54167,.F.); +#54945 = PLANE('',#54946); +#54946 = AXIS2_PLACEMENT_3D('',#54947,#54948,#54949); +#54947 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#54948 = DIRECTION('',(1.,0.,0.)); +#54949 = DIRECTION('',(0.,0.,1.)); +#54950 = ADVANCED_FACE('',(#54951),#54976,.T.); +#54951 = FACE_BOUND('',#54952,.T.); +#54952 = EDGE_LOOP('',(#54953,#54961,#54969,#54975)); +#54953 = ORIENTED_EDGE('',*,*,#54954,.F.); +#54954 = EDGE_CURVE('',#54955,#54192,#54957,.T.); +#54955 = VERTEX_POINT('',#54956); +#54956 = CARTESIAN_POINT('',(0.32,-4.76,-2.84)); +#54957 = LINE('',#54958,#54959); +#54958 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#54959 = VECTOR('',#54960,1.); +#54960 = DIRECTION('',(0.,0.,1.)); +#54961 = ORIENTED_EDGE('',*,*,#54962,.F.); +#54962 = EDGE_CURVE('',#54963,#54955,#54965,.T.); +#54963 = VERTEX_POINT('',#54964); +#54964 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#54965 = LINE('',#54966,#54967); +#54966 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#54967 = VECTOR('',#54968,1.); +#54968 = DIRECTION('',(1.,0.,0.)); +#54969 = ORIENTED_EDGE('',*,*,#54970,.T.); +#54970 = EDGE_CURVE('',#54963,#54194,#54971,.T.); +#54971 = LINE('',#54972,#54973); +#54972 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#54973 = VECTOR('',#54974,1.); +#54974 = DIRECTION('',(0.,0.,1.)); +#54975 = ORIENTED_EDGE('',*,*,#54191,.F.); +#54976 = PLANE('',#54977); +#54977 = AXIS2_PLACEMENT_3D('',#54978,#54979,#54980); +#54978 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#54979 = DIRECTION('',(0.,1.,0.)); +#54980 = DIRECTION('',(0.,-0.,1.)); +#54981 = ADVANCED_FACE('',(#54982),#55000,.F.); +#54982 = FACE_BOUND('',#54983,.F.); +#54983 = EDGE_LOOP('',(#54984,#54992,#54998,#54999)); +#54984 = ORIENTED_EDGE('',*,*,#54985,.F.); +#54985 = EDGE_CURVE('',#54986,#54210,#54988,.T.); +#54986 = VERTEX_POINT('',#54987); +#54987 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#54988 = LINE('',#54989,#54990); +#54989 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#54990 = VECTOR('',#54991,1.); +#54991 = DIRECTION('',(0.,0.,1.)); +#54992 = ORIENTED_EDGE('',*,*,#54993,.T.); +#54993 = EDGE_CURVE('',#54986,#54963,#54994,.T.); +#54994 = LINE('',#54995,#54996); +#54995 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#54996 = VECTOR('',#54997,1.); +#54997 = DIRECTION('',(0.,1.,0.)); +#54998 = ORIENTED_EDGE('',*,*,#54970,.T.); +#54999 = ORIENTED_EDGE('',*,*,#54217,.F.); +#55000 = PLANE('',#55001); +#55001 = AXIS2_PLACEMENT_3D('',#55002,#55003,#55004); +#55002 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55003 = DIRECTION('',(1.,0.,0.)); +#55004 = DIRECTION('',(0.,0.,1.)); +#55005 = ADVANCED_FACE('',(#55006),#55024,.F.); +#55006 = FACE_BOUND('',#55007,.F.); +#55007 = EDGE_LOOP('',(#55008,#55016,#55022,#55023)); +#55008 = ORIENTED_EDGE('',*,*,#55009,.F.); +#55009 = EDGE_CURVE('',#55010,#54202,#55012,.T.); +#55010 = VERTEX_POINT('',#55011); +#55011 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#55012 = LINE('',#55013,#55014); +#55013 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55014 = VECTOR('',#55015,1.); +#55015 = DIRECTION('',(0.,0.,1.)); +#55016 = ORIENTED_EDGE('',*,*,#55017,.F.); +#55017 = EDGE_CURVE('',#54986,#55010,#55018,.T.); +#55018 = LINE('',#55019,#55020); +#55019 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#55020 = VECTOR('',#55021,1.); +#55021 = DIRECTION('',(1.,0.,0.)); +#55022 = ORIENTED_EDGE('',*,*,#54985,.T.); +#55023 = ORIENTED_EDGE('',*,*,#54209,.F.); +#55024 = PLANE('',#55025); +#55025 = AXIS2_PLACEMENT_3D('',#55026,#55027,#55028); +#55026 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55027 = DIRECTION('',(0.,1.,0.)); +#55028 = DIRECTION('',(0.,-0.,1.)); +#55029 = ADVANCED_FACE('',(#55030),#55041,.T.); +#55030 = FACE_BOUND('',#55031,.T.); +#55031 = EDGE_LOOP('',(#55032,#55033,#55039,#55040)); +#55032 = ORIENTED_EDGE('',*,*,#55009,.F.); +#55033 = ORIENTED_EDGE('',*,*,#55034,.T.); +#55034 = EDGE_CURVE('',#55010,#54955,#55035,.T.); +#55035 = LINE('',#55036,#55037); +#55036 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#55037 = VECTOR('',#55038,1.); +#55038 = DIRECTION('',(0.,1.,0.)); +#55039 = ORIENTED_EDGE('',*,*,#54954,.T.); +#55040 = ORIENTED_EDGE('',*,*,#54201,.F.); +#55041 = PLANE('',#55042); +#55042 = AXIS2_PLACEMENT_3D('',#55043,#55044,#55045); +#55043 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55044 = DIRECTION('',(1.,0.,0.)); +#55045 = DIRECTION('',(0.,0.,1.)); +#55046 = ADVANCED_FACE('',(#55047),#55072,.T.); +#55047 = FACE_BOUND('',#55048,.T.); +#55048 = EDGE_LOOP('',(#55049,#55057,#55058,#55066)); +#55049 = ORIENTED_EDGE('',*,*,#55050,.F.); +#55050 = EDGE_CURVE('',#54371,#55051,#55053,.T.); +#55051 = VERTEX_POINT('',#55052); +#55052 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#55053 = LINE('',#55054,#55055); +#55054 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#55055 = VECTOR('',#55056,1.); +#55056 = DIRECTION('',(0.,0.,1.)); +#55057 = ORIENTED_EDGE('',*,*,#54370,.T.); +#55058 = ORIENTED_EDGE('',*,*,#55059,.T.); +#55059 = EDGE_CURVE('',#54373,#55060,#55062,.T.); +#55060 = VERTEX_POINT('',#55061); +#55061 = CARTESIAN_POINT('',(0.32,0.32,8.38)); +#55062 = LINE('',#55063,#55064); +#55063 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#55064 = VECTOR('',#55065,1.); +#55065 = DIRECTION('',(0.,0.,1.)); +#55066 = ORIENTED_EDGE('',*,*,#55067,.F.); +#55067 = EDGE_CURVE('',#55051,#55060,#55068,.T.); +#55068 = LINE('',#55069,#55070); +#55069 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#55070 = VECTOR('',#55071,1.); +#55071 = DIRECTION('',(0.,1.,0.)); +#55072 = PLANE('',#55073); +#55073 = AXIS2_PLACEMENT_3D('',#55074,#55075,#55076); +#55074 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#55075 = DIRECTION('',(1.,0.,0.)); +#55076 = DIRECTION('',(0.,0.,1.)); +#55077 = ADVANCED_FACE('',(#55078),#55096,.T.); +#55078 = FACE_BOUND('',#55079,.T.); +#55079 = EDGE_LOOP('',(#55080,#55081,#55082,#55090)); +#55080 = ORIENTED_EDGE('',*,*,#55059,.F.); +#55081 = ORIENTED_EDGE('',*,*,#54396,.T.); +#55082 = ORIENTED_EDGE('',*,*,#55083,.T.); +#55083 = EDGE_CURVE('',#54389,#55084,#55086,.T.); +#55084 = VERTEX_POINT('',#55085); +#55085 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#55086 = LINE('',#55087,#55088); +#55087 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#55088 = VECTOR('',#55089,1.); +#55089 = DIRECTION('',(0.,0.,1.)); +#55090 = ORIENTED_EDGE('',*,*,#55091,.T.); +#55091 = EDGE_CURVE('',#55084,#55060,#55092,.T.); +#55092 = LINE('',#55093,#55094); +#55093 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#55094 = VECTOR('',#55095,1.); +#55095 = DIRECTION('',(1.,0.,0.)); +#55096 = PLANE('',#55097); +#55097 = AXIS2_PLACEMENT_3D('',#55098,#55099,#55100); +#55098 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#55099 = DIRECTION('',(0.,1.,0.)); +#55100 = DIRECTION('',(0.,-0.,1.)); +#55101 = ADVANCED_FACE('',(#55102),#55120,.F.); +#55102 = FACE_BOUND('',#55103,.F.); +#55103 = EDGE_LOOP('',(#55104,#55112,#55113,#55114)); +#55104 = ORIENTED_EDGE('',*,*,#55105,.F.); +#55105 = EDGE_CURVE('',#54381,#55106,#55108,.T.); +#55106 = VERTEX_POINT('',#55107); +#55107 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#55108 = LINE('',#55109,#55110); +#55109 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55110 = VECTOR('',#55111,1.); +#55111 = DIRECTION('',(0.,0.,1.)); +#55112 = ORIENTED_EDGE('',*,*,#54388,.T.); +#55113 = ORIENTED_EDGE('',*,*,#55083,.T.); +#55114 = ORIENTED_EDGE('',*,*,#55115,.F.); +#55115 = EDGE_CURVE('',#55106,#55084,#55116,.T.); +#55116 = LINE('',#55117,#55118); +#55117 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#55118 = VECTOR('',#55119,1.); +#55119 = DIRECTION('',(0.,1.,0.)); +#55120 = PLANE('',#55121); +#55121 = AXIS2_PLACEMENT_3D('',#55122,#55123,#55124); +#55122 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55123 = DIRECTION('',(1.,0.,0.)); +#55124 = DIRECTION('',(0.,0.,1.)); +#55125 = ADVANCED_FACE('',(#55126),#55137,.F.); +#55126 = FACE_BOUND('',#55127,.F.); +#55127 = EDGE_LOOP('',(#55128,#55129,#55130,#55131)); +#55128 = ORIENTED_EDGE('',*,*,#55050,.F.); +#55129 = ORIENTED_EDGE('',*,*,#54380,.T.); +#55130 = ORIENTED_EDGE('',*,*,#55105,.T.); +#55131 = ORIENTED_EDGE('',*,*,#55132,.T.); +#55132 = EDGE_CURVE('',#55106,#55051,#55133,.T.); +#55133 = LINE('',#55134,#55135); +#55134 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#55135 = VECTOR('',#55136,1.); +#55136 = DIRECTION('',(1.,0.,0.)); +#55137 = PLANE('',#55138); +#55138 = AXIS2_PLACEMENT_3D('',#55139,#55140,#55141); +#55139 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55140 = DIRECTION('',(0.,1.,0.)); +#55141 = DIRECTION('',(0.,-0.,1.)); +#55142 = ADVANCED_FACE('',(#55143),#55168,.F.); +#55143 = FACE_BOUND('',#55144,.F.); +#55144 = EDGE_LOOP('',(#55145,#55153,#55154,#55162)); +#55145 = ORIENTED_EDGE('',*,*,#55146,.F.); +#55146 = EDGE_CURVE('',#54405,#55147,#55149,.T.); +#55147 = VERTEX_POINT('',#55148); +#55148 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#55149 = LINE('',#55150,#55151); +#55150 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#55151 = VECTOR('',#55152,1.); +#55152 = DIRECTION('',(0.,0.,1.)); +#55153 = ORIENTED_EDGE('',*,*,#54404,.T.); +#55154 = ORIENTED_EDGE('',*,*,#55155,.T.); +#55155 = EDGE_CURVE('',#54407,#55156,#55158,.T.); +#55156 = VERTEX_POINT('',#55157); +#55157 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#55158 = LINE('',#55159,#55160); +#55159 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55160 = VECTOR('',#55161,1.); +#55161 = DIRECTION('',(0.,0.,1.)); +#55162 = ORIENTED_EDGE('',*,*,#55163,.T.); +#55163 = EDGE_CURVE('',#55156,#55147,#55164,.T.); +#55164 = LINE('',#55165,#55166); +#55165 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#55166 = VECTOR('',#55167,1.); +#55167 = DIRECTION('',(1.,0.,0.)); +#55168 = PLANE('',#55169); +#55169 = AXIS2_PLACEMENT_3D('',#55170,#55171,#55172); +#55170 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55171 = DIRECTION('',(0.,1.,0.)); +#55172 = DIRECTION('',(0.,-0.,1.)); +#55173 = ADVANCED_FACE('',(#55174),#55192,.T.); +#55174 = FACE_BOUND('',#55175,.T.); +#55175 = EDGE_LOOP('',(#55176,#55177,#55178,#55186)); +#55176 = ORIENTED_EDGE('',*,*,#55146,.F.); +#55177 = ORIENTED_EDGE('',*,*,#54430,.T.); +#55178 = ORIENTED_EDGE('',*,*,#55179,.T.); +#55179 = EDGE_CURVE('',#54423,#55180,#55182,.T.); +#55180 = VERTEX_POINT('',#55181); +#55181 = CARTESIAN_POINT('',(0.32,-2.22,8.38)); +#55182 = LINE('',#55183,#55184); +#55183 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#55184 = VECTOR('',#55185,1.); +#55185 = DIRECTION('',(0.,0.,1.)); +#55186 = ORIENTED_EDGE('',*,*,#55187,.F.); +#55187 = EDGE_CURVE('',#55147,#55180,#55188,.T.); +#55188 = LINE('',#55189,#55190); +#55189 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#55190 = VECTOR('',#55191,1.); +#55191 = DIRECTION('',(0.,1.,0.)); +#55192 = PLANE('',#55193); +#55193 = AXIS2_PLACEMENT_3D('',#55194,#55195,#55196); +#55194 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#55195 = DIRECTION('',(1.,0.,0.)); +#55196 = DIRECTION('',(0.,0.,1.)); +#55197 = ADVANCED_FACE('',(#55198),#55216,.T.); +#55198 = FACE_BOUND('',#55199,.T.); +#55199 = EDGE_LOOP('',(#55200,#55201,#55202,#55210)); +#55200 = ORIENTED_EDGE('',*,*,#55179,.F.); +#55201 = ORIENTED_EDGE('',*,*,#54422,.T.); +#55202 = ORIENTED_EDGE('',*,*,#55203,.T.); +#55203 = EDGE_CURVE('',#54415,#55204,#55206,.T.); +#55204 = VERTEX_POINT('',#55205); +#55205 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#55206 = LINE('',#55207,#55208); +#55207 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#55208 = VECTOR('',#55209,1.); +#55209 = DIRECTION('',(0.,0.,1.)); +#55210 = ORIENTED_EDGE('',*,*,#55211,.T.); +#55211 = EDGE_CURVE('',#55204,#55180,#55212,.T.); +#55212 = LINE('',#55213,#55214); +#55213 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#55214 = VECTOR('',#55215,1.); +#55215 = DIRECTION('',(1.,0.,0.)); +#55216 = PLANE('',#55217); +#55217 = AXIS2_PLACEMENT_3D('',#55218,#55219,#55220); +#55218 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#55219 = DIRECTION('',(0.,1.,0.)); +#55220 = DIRECTION('',(0.,-0.,1.)); +#55221 = ADVANCED_FACE('',(#55222),#55233,.F.); +#55222 = FACE_BOUND('',#55223,.F.); +#55223 = EDGE_LOOP('',(#55224,#55225,#55226,#55227)); +#55224 = ORIENTED_EDGE('',*,*,#55155,.F.); +#55225 = ORIENTED_EDGE('',*,*,#54414,.T.); +#55226 = ORIENTED_EDGE('',*,*,#55203,.T.); +#55227 = ORIENTED_EDGE('',*,*,#55228,.F.); +#55228 = EDGE_CURVE('',#55156,#55204,#55229,.T.); +#55229 = LINE('',#55230,#55231); +#55230 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#55231 = VECTOR('',#55232,1.); +#55232 = DIRECTION('',(0.,1.,0.)); +#55233 = PLANE('',#55234); +#55234 = AXIS2_PLACEMENT_3D('',#55235,#55236,#55237); +#55235 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55236 = DIRECTION('',(1.,0.,0.)); +#55237 = DIRECTION('',(0.,0.,1.)); +#55238 = ADVANCED_FACE('',(#55239),#55264,.T.); +#55239 = FACE_BOUND('',#55240,.T.); +#55240 = EDGE_LOOP('',(#55241,#55249,#55250,#55258)); +#55241 = ORIENTED_EDGE('',*,*,#55242,.F.); +#55242 = EDGE_CURVE('',#54439,#55243,#55245,.T.); +#55243 = VERTEX_POINT('',#55244); +#55244 = CARTESIAN_POINT('',(0.32,-4.76,8.38)); +#55245 = LINE('',#55246,#55247); +#55246 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#55247 = VECTOR('',#55248,1.); +#55248 = DIRECTION('',(0.,0.,1.)); +#55249 = ORIENTED_EDGE('',*,*,#54438,.T.); +#55250 = ORIENTED_EDGE('',*,*,#55251,.T.); +#55251 = EDGE_CURVE('',#54441,#55252,#55254,.T.); +#55252 = VERTEX_POINT('',#55253); +#55253 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#55254 = LINE('',#55255,#55256); +#55255 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#55256 = VECTOR('',#55257,1.); +#55257 = DIRECTION('',(0.,0.,1.)); +#55258 = ORIENTED_EDGE('',*,*,#55259,.T.); +#55259 = EDGE_CURVE('',#55252,#55243,#55260,.T.); +#55260 = LINE('',#55261,#55262); +#55261 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#55262 = VECTOR('',#55263,1.); +#55263 = DIRECTION('',(1.,0.,0.)); +#55264 = PLANE('',#55265); +#55265 = AXIS2_PLACEMENT_3D('',#55266,#55267,#55268); +#55266 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#55267 = DIRECTION('',(0.,1.,0.)); +#55268 = DIRECTION('',(0.,-0.,1.)); +#55269 = ADVANCED_FACE('',(#55270),#55288,.F.); +#55270 = FACE_BOUND('',#55271,.F.); +#55271 = EDGE_LOOP('',(#55272,#55280,#55281,#55282)); +#55272 = ORIENTED_EDGE('',*,*,#55273,.F.); +#55273 = EDGE_CURVE('',#54457,#55274,#55276,.T.); +#55274 = VERTEX_POINT('',#55275); +#55275 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#55276 = LINE('',#55277,#55278); +#55277 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55278 = VECTOR('',#55279,1.); +#55279 = DIRECTION('',(0.,0.,1.)); +#55280 = ORIENTED_EDGE('',*,*,#54464,.T.); +#55281 = ORIENTED_EDGE('',*,*,#55251,.T.); +#55282 = ORIENTED_EDGE('',*,*,#55283,.F.); +#55283 = EDGE_CURVE('',#55274,#55252,#55284,.T.); +#55284 = LINE('',#55285,#55286); +#55285 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#55286 = VECTOR('',#55287,1.); +#55287 = DIRECTION('',(0.,1.,0.)); +#55288 = PLANE('',#55289); +#55289 = AXIS2_PLACEMENT_3D('',#55290,#55291,#55292); +#55290 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55291 = DIRECTION('',(1.,0.,0.)); +#55292 = DIRECTION('',(0.,0.,1.)); +#55293 = ADVANCED_FACE('',(#55294),#55312,.F.); +#55294 = FACE_BOUND('',#55295,.F.); +#55295 = EDGE_LOOP('',(#55296,#55304,#55305,#55306)); +#55296 = ORIENTED_EDGE('',*,*,#55297,.F.); +#55297 = EDGE_CURVE('',#54449,#55298,#55300,.T.); +#55298 = VERTEX_POINT('',#55299); +#55299 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#55300 = LINE('',#55301,#55302); +#55301 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55302 = VECTOR('',#55303,1.); +#55303 = DIRECTION('',(0.,0.,1.)); +#55304 = ORIENTED_EDGE('',*,*,#54456,.T.); +#55305 = ORIENTED_EDGE('',*,*,#55273,.T.); +#55306 = ORIENTED_EDGE('',*,*,#55307,.T.); +#55307 = EDGE_CURVE('',#55274,#55298,#55308,.T.); +#55308 = LINE('',#55309,#55310); +#55309 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#55310 = VECTOR('',#55311,1.); +#55311 = DIRECTION('',(1.,0.,0.)); +#55312 = PLANE('',#55313); +#55313 = AXIS2_PLACEMENT_3D('',#55314,#55315,#55316); +#55314 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55315 = DIRECTION('',(0.,1.,0.)); +#55316 = DIRECTION('',(0.,-0.,1.)); +#55317 = ADVANCED_FACE('',(#55318),#55329,.T.); +#55318 = FACE_BOUND('',#55319,.T.); +#55319 = EDGE_LOOP('',(#55320,#55321,#55322,#55323)); +#55320 = ORIENTED_EDGE('',*,*,#55297,.F.); +#55321 = ORIENTED_EDGE('',*,*,#54448,.T.); +#55322 = ORIENTED_EDGE('',*,*,#55242,.T.); +#55323 = ORIENTED_EDGE('',*,*,#55324,.F.); +#55324 = EDGE_CURVE('',#55298,#55243,#55325,.T.); +#55325 = LINE('',#55326,#55327); +#55326 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#55327 = VECTOR('',#55328,1.); +#55328 = DIRECTION('',(0.,1.,0.)); +#55329 = PLANE('',#55330); +#55330 = AXIS2_PLACEMENT_3D('',#55331,#55332,#55333); +#55331 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#55332 = DIRECTION('',(1.,0.,0.)); +#55333 = DIRECTION('',(0.,0.,1.)); +#55334 = ADVANCED_FACE('',(#55335),#55360,.F.); +#55335 = FACE_BOUND('',#55336,.F.); +#55336 = EDGE_LOOP('',(#55337,#55345,#55346,#55354)); +#55337 = ORIENTED_EDGE('',*,*,#55338,.F.); +#55338 = EDGE_CURVE('',#54763,#55339,#55341,.T.); +#55339 = VERTEX_POINT('',#55340); +#55340 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#55341 = LINE('',#55342,#55343); +#55342 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#55343 = VECTOR('',#55344,1.); +#55344 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#55345 = ORIENTED_EDGE('',*,*,#54770,.T.); +#55346 = ORIENTED_EDGE('',*,*,#55347,.T.); +#55347 = EDGE_CURVE('',#54771,#55348,#55350,.T.); +#55348 = VERTEX_POINT('',#55349); +#55349 = CARTESIAN_POINT('',(0.16,0.16,-3.)); +#55350 = LINE('',#55351,#55352); +#55351 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + -3.106666666667)); +#55352 = VECTOR('',#55353,1.); +#55353 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#55354 = ORIENTED_EDGE('',*,*,#55355,.F.); +#55355 = EDGE_CURVE('',#55339,#55348,#55356,.T.); +#55356 = LINE('',#55357,#55358); +#55357 = CARTESIAN_POINT('',(0.16,-0.32,-3.)); +#55358 = VECTOR('',#55359,1.); +#55359 = DIRECTION('',(0.,1.,0.)); +#55360 = PLANE('',#55361); +#55361 = AXIS2_PLACEMENT_3D('',#55362,#55363,#55364); +#55362 = CARTESIAN_POINT('',(0.24,-0.32,-2.92)); +#55363 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#55364 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#55365 = ADVANCED_FACE('',(#55366),#55384,.F.); +#55366 = FACE_BOUND('',#55367,.T.); +#55367 = EDGE_LOOP('',(#55368,#55376,#55377,#55378)); +#55368 = ORIENTED_EDGE('',*,*,#55369,.F.); +#55369 = EDGE_CURVE('',#54795,#55370,#55372,.T.); +#55370 = VERTEX_POINT('',#55371); +#55371 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#55372 = LINE('',#55373,#55374); +#55373 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#55374 = VECTOR('',#55375,1.); +#55375 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#55376 = ORIENTED_EDGE('',*,*,#54794,.T.); +#55377 = ORIENTED_EDGE('',*,*,#55347,.T.); +#55378 = ORIENTED_EDGE('',*,*,#55379,.F.); +#55379 = EDGE_CURVE('',#55370,#55348,#55380,.T.); +#55380 = LINE('',#55381,#55382); +#55381 = CARTESIAN_POINT('',(-0.32,0.16,-3.)); +#55382 = VECTOR('',#55383,1.); +#55383 = DIRECTION('',(1.,0.,0.)); +#55384 = PLANE('',#55385); +#55385 = AXIS2_PLACEMENT_3D('',#55386,#55387,#55388); +#55386 = CARTESIAN_POINT('',(-0.32,0.24,-2.92)); +#55387 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#55388 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#55389 = ADVANCED_FACE('',(#55390),#55408,.T.); +#55390 = FACE_BOUND('',#55391,.T.); +#55391 = EDGE_LOOP('',(#55392,#55400,#55401,#55402)); +#55392 = ORIENTED_EDGE('',*,*,#55393,.F.); +#55393 = EDGE_CURVE('',#54818,#55394,#55396,.T.); +#55394 = VERTEX_POINT('',#55395); +#55395 = CARTESIAN_POINT('',(-0.16,-0.16,-3.)); +#55396 = LINE('',#55397,#55398); +#55397 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + -2.893333333333)); +#55398 = VECTOR('',#55399,1.); +#55399 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#55400 = ORIENTED_EDGE('',*,*,#54825,.T.); +#55401 = ORIENTED_EDGE('',*,*,#55369,.T.); +#55402 = ORIENTED_EDGE('',*,*,#55403,.F.); +#55403 = EDGE_CURVE('',#55394,#55370,#55404,.T.); +#55404 = LINE('',#55405,#55406); +#55405 = CARTESIAN_POINT('',(-0.16,-0.32,-3.)); +#55406 = VECTOR('',#55407,1.); +#55407 = DIRECTION('',(0.,1.,0.)); +#55408 = PLANE('',#55409); +#55409 = AXIS2_PLACEMENT_3D('',#55410,#55411,#55412); +#55410 = CARTESIAN_POINT('',(-0.24,-0.32,-2.92)); +#55411 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#55412 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#55413 = ADVANCED_FACE('',(#55414),#55425,.T.); +#55414 = FACE_BOUND('',#55415,.F.); +#55415 = EDGE_LOOP('',(#55416,#55417,#55418,#55419)); +#55416 = ORIENTED_EDGE('',*,*,#55393,.F.); +#55417 = ORIENTED_EDGE('',*,*,#54842,.T.); +#55418 = ORIENTED_EDGE('',*,*,#55338,.T.); +#55419 = ORIENTED_EDGE('',*,*,#55420,.F.); +#55420 = EDGE_CURVE('',#55394,#55339,#55421,.T.); +#55421 = LINE('',#55422,#55423); +#55422 = CARTESIAN_POINT('',(-0.32,-0.16,-3.)); +#55423 = VECTOR('',#55424,1.); +#55424 = DIRECTION('',(1.,0.,0.)); +#55425 = PLANE('',#55426); +#55426 = AXIS2_PLACEMENT_3D('',#55427,#55428,#55429); +#55427 = CARTESIAN_POINT('',(-0.32,-0.24,-2.92)); +#55428 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#55429 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#55430 = ADVANCED_FACE('',(#55431),#55456,.T.); +#55431 = FACE_BOUND('',#55432,.F.); +#55432 = EDGE_LOOP('',(#55433,#55441,#55442,#55450)); +#55433 = ORIENTED_EDGE('',*,*,#55434,.F.); +#55434 = EDGE_CURVE('',#54867,#55435,#55437,.T.); +#55435 = VERTEX_POINT('',#55436); +#55436 = CARTESIAN_POINT('',(-0.16,-2.7,-3.)); +#55437 = LINE('',#55438,#55439); +#55438 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + -2.893333333333)); +#55439 = VECTOR('',#55440,1.); +#55440 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#55441 = ORIENTED_EDGE('',*,*,#54866,.T.); +#55442 = ORIENTED_EDGE('',*,*,#55443,.T.); +#55443 = EDGE_CURVE('',#54859,#55444,#55446,.T.); +#55444 = VERTEX_POINT('',#55445); +#55445 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#55446 = LINE('',#55447,#55448); +#55447 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#55448 = VECTOR('',#55449,1.); +#55449 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#55450 = ORIENTED_EDGE('',*,*,#55451,.F.); +#55451 = EDGE_CURVE('',#55435,#55444,#55452,.T.); +#55452 = LINE('',#55453,#55454); +#55453 = CARTESIAN_POINT('',(-0.32,-2.7,-3.)); +#55454 = VECTOR('',#55455,1.); +#55455 = DIRECTION('',(1.,0.,0.)); +#55456 = PLANE('',#55457); +#55457 = AXIS2_PLACEMENT_3D('',#55458,#55459,#55460); +#55458 = CARTESIAN_POINT('',(-0.32,-2.78,-2.92)); +#55459 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#55460 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#55461 = ADVANCED_FACE('',(#55462),#55480,.F.); +#55462 = FACE_BOUND('',#55463,.F.); +#55463 = EDGE_LOOP('',(#55464,#55465,#55466,#55474)); +#55464 = ORIENTED_EDGE('',*,*,#55443,.F.); +#55465 = ORIENTED_EDGE('',*,*,#54890,.T.); +#55466 = ORIENTED_EDGE('',*,*,#55467,.T.); +#55467 = EDGE_CURVE('',#54891,#55468,#55470,.T.); +#55468 = VERTEX_POINT('',#55469); +#55469 = CARTESIAN_POINT('',(0.16,-2.38,-3.)); +#55470 = LINE('',#55471,#55472); +#55471 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + -3.106666666667)); +#55472 = VECTOR('',#55473,1.); +#55473 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#55474 = ORIENTED_EDGE('',*,*,#55475,.F.); +#55475 = EDGE_CURVE('',#55444,#55468,#55476,.T.); +#55476 = LINE('',#55477,#55478); +#55477 = CARTESIAN_POINT('',(0.16,-2.86,-3.)); +#55478 = VECTOR('',#55479,1.); +#55479 = DIRECTION('',(0.,1.,0.)); +#55480 = PLANE('',#55481); +#55481 = AXIS2_PLACEMENT_3D('',#55482,#55483,#55484); +#55482 = CARTESIAN_POINT('',(0.24,-2.86,-2.92)); +#55483 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#55484 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#55485 = ADVANCED_FACE('',(#55486),#55504,.F.); +#55486 = FACE_BOUND('',#55487,.T.); +#55487 = EDGE_LOOP('',(#55488,#55496,#55497,#55498)); +#55488 = ORIENTED_EDGE('',*,*,#55489,.F.); +#55489 = EDGE_CURVE('',#54915,#55490,#55492,.T.); +#55490 = VERTEX_POINT('',#55491); +#55491 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#55492 = LINE('',#55493,#55494); +#55493 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#55494 = VECTOR('',#55495,1.); +#55495 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#55496 = ORIENTED_EDGE('',*,*,#54914,.T.); +#55497 = ORIENTED_EDGE('',*,*,#55467,.T.); +#55498 = ORIENTED_EDGE('',*,*,#55499,.F.); +#55499 = EDGE_CURVE('',#55490,#55468,#55500,.T.); +#55500 = LINE('',#55501,#55502); +#55501 = CARTESIAN_POINT('',(-0.32,-2.38,-3.)); +#55502 = VECTOR('',#55503,1.); +#55503 = DIRECTION('',(1.,0.,0.)); +#55504 = PLANE('',#55505); +#55505 = AXIS2_PLACEMENT_3D('',#55506,#55507,#55508); +#55506 = CARTESIAN_POINT('',(-0.32,-2.3,-2.92)); +#55507 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#55508 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#55509 = ADVANCED_FACE('',(#55510),#55521,.T.); +#55510 = FACE_BOUND('',#55511,.T.); +#55511 = EDGE_LOOP('',(#55512,#55513,#55514,#55515)); +#55512 = ORIENTED_EDGE('',*,*,#55434,.F.); +#55513 = ORIENTED_EDGE('',*,*,#54938,.T.); +#55514 = ORIENTED_EDGE('',*,*,#55489,.T.); +#55515 = ORIENTED_EDGE('',*,*,#55516,.F.); +#55516 = EDGE_CURVE('',#55435,#55490,#55517,.T.); +#55517 = LINE('',#55518,#55519); +#55518 = CARTESIAN_POINT('',(-0.16,-2.86,-3.)); +#55519 = VECTOR('',#55520,1.); +#55520 = DIRECTION('',(0.,1.,0.)); +#55521 = PLANE('',#55522); +#55522 = AXIS2_PLACEMENT_3D('',#55523,#55524,#55525); +#55523 = CARTESIAN_POINT('',(-0.24,-2.86,-2.92)); +#55524 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#55525 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#55526 = ADVANCED_FACE('',(#55527),#55552,.F.); +#55527 = FACE_BOUND('',#55528,.T.); +#55528 = EDGE_LOOP('',(#55529,#55537,#55538,#55546)); +#55529 = ORIENTED_EDGE('',*,*,#55530,.F.); +#55530 = EDGE_CURVE('',#54963,#55531,#55533,.T.); +#55531 = VERTEX_POINT('',#55532); +#55532 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#55533 = LINE('',#55534,#55535); +#55534 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#55535 = VECTOR('',#55536,1.); +#55536 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#55537 = ORIENTED_EDGE('',*,*,#54962,.T.); +#55538 = ORIENTED_EDGE('',*,*,#55539,.T.); +#55539 = EDGE_CURVE('',#54955,#55540,#55542,.T.); +#55540 = VERTEX_POINT('',#55541); +#55541 = CARTESIAN_POINT('',(0.16,-4.92,-3.)); +#55542 = LINE('',#55543,#55544); +#55543 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + -3.106666666667)); +#55544 = VECTOR('',#55545,1.); +#55545 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#55546 = ORIENTED_EDGE('',*,*,#55547,.F.); +#55547 = EDGE_CURVE('',#55531,#55540,#55548,.T.); +#55548 = LINE('',#55549,#55550); +#55549 = CARTESIAN_POINT('',(-0.32,-4.92,-3.)); +#55550 = VECTOR('',#55551,1.); +#55551 = DIRECTION('',(1.,0.,0.)); +#55552 = PLANE('',#55553); +#55553 = AXIS2_PLACEMENT_3D('',#55554,#55555,#55556); +#55554 = CARTESIAN_POINT('',(-0.32,-4.84,-2.92)); +#55555 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#55556 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#55557 = ADVANCED_FACE('',(#55558),#55576,.T.); +#55558 = FACE_BOUND('',#55559,.T.); +#55559 = EDGE_LOOP('',(#55560,#55568,#55569,#55570)); +#55560 = ORIENTED_EDGE('',*,*,#55561,.F.); +#55561 = EDGE_CURVE('',#54986,#55562,#55564,.T.); +#55562 = VERTEX_POINT('',#55563); +#55563 = CARTESIAN_POINT('',(-0.16,-5.24,-3.)); +#55564 = LINE('',#55565,#55566); +#55565 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + -2.893333333333)); +#55566 = VECTOR('',#55567,1.); +#55567 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#55568 = ORIENTED_EDGE('',*,*,#54993,.T.); +#55569 = ORIENTED_EDGE('',*,*,#55530,.T.); +#55570 = ORIENTED_EDGE('',*,*,#55571,.F.); +#55571 = EDGE_CURVE('',#55562,#55531,#55572,.T.); +#55572 = LINE('',#55573,#55574); +#55573 = CARTESIAN_POINT('',(-0.16,-5.4,-3.)); +#55574 = VECTOR('',#55575,1.); +#55575 = DIRECTION('',(0.,1.,0.)); +#55576 = PLANE('',#55577); +#55577 = AXIS2_PLACEMENT_3D('',#55578,#55579,#55580); +#55578 = CARTESIAN_POINT('',(-0.24,-5.4,-2.92)); +#55579 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#55580 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#55581 = ADVANCED_FACE('',(#55582),#55600,.T.); +#55582 = FACE_BOUND('',#55583,.F.); +#55583 = EDGE_LOOP('',(#55584,#55585,#55586,#55594)); +#55584 = ORIENTED_EDGE('',*,*,#55561,.F.); +#55585 = ORIENTED_EDGE('',*,*,#55017,.T.); +#55586 = ORIENTED_EDGE('',*,*,#55587,.T.); +#55587 = EDGE_CURVE('',#55010,#55588,#55590,.T.); +#55588 = VERTEX_POINT('',#55589); +#55589 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#55590 = LINE('',#55591,#55592); +#55591 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#55592 = VECTOR('',#55593,1.); +#55593 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#55594 = ORIENTED_EDGE('',*,*,#55595,.F.); +#55595 = EDGE_CURVE('',#55562,#55588,#55596,.T.); +#55596 = LINE('',#55597,#55598); +#55597 = CARTESIAN_POINT('',(-0.32,-5.24,-3.)); +#55598 = VECTOR('',#55599,1.); +#55599 = DIRECTION('',(1.,0.,0.)); +#55600 = PLANE('',#55601); +#55601 = AXIS2_PLACEMENT_3D('',#55602,#55603,#55604); +#55602 = CARTESIAN_POINT('',(-0.32,-5.32,-2.92)); +#55603 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#55604 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#55605 = ADVANCED_FACE('',(#55606),#55617,.F.); +#55606 = FACE_BOUND('',#55607,.F.); +#55607 = EDGE_LOOP('',(#55608,#55609,#55610,#55611)); +#55608 = ORIENTED_EDGE('',*,*,#55587,.F.); +#55609 = ORIENTED_EDGE('',*,*,#55034,.T.); +#55610 = ORIENTED_EDGE('',*,*,#55539,.T.); +#55611 = ORIENTED_EDGE('',*,*,#55612,.F.); +#55612 = EDGE_CURVE('',#55588,#55540,#55613,.T.); +#55613 = LINE('',#55614,#55615); +#55614 = CARTESIAN_POINT('',(0.16,-5.4,-3.)); +#55615 = VECTOR('',#55616,1.); +#55616 = DIRECTION('',(0.,1.,0.)); +#55617 = PLANE('',#55618); +#55618 = AXIS2_PLACEMENT_3D('',#55619,#55620,#55621); +#55619 = CARTESIAN_POINT('',(0.24,-5.4,-2.92)); +#55620 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#55621 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#55622 = ADVANCED_FACE('',(#55623),#55648,.T.); +#55623 = FACE_BOUND('',#55624,.T.); +#55624 = EDGE_LOOP('',(#55625,#55633,#55634,#55642)); +#55625 = ORIENTED_EDGE('',*,*,#55626,.F.); +#55626 = EDGE_CURVE('',#55051,#55627,#55629,.T.); +#55627 = VERTEX_POINT('',#55628); +#55628 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#55629 = LINE('',#55630,#55631); +#55630 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#55631 = VECTOR('',#55632,1.); +#55632 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#55633 = ORIENTED_EDGE('',*,*,#55067,.T.); +#55634 = ORIENTED_EDGE('',*,*,#55635,.T.); +#55635 = EDGE_CURVE('',#55060,#55636,#55638,.T.); +#55636 = VERTEX_POINT('',#55637); +#55637 = CARTESIAN_POINT('',(0.16,0.16,8.54)); +#55638 = LINE('',#55639,#55640); +#55639 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + 8.646666666667)); +#55640 = VECTOR('',#55641,1.); +#55641 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#55642 = ORIENTED_EDGE('',*,*,#55643,.F.); +#55643 = EDGE_CURVE('',#55627,#55636,#55644,.T.); +#55644 = LINE('',#55645,#55646); +#55645 = CARTESIAN_POINT('',(0.16,-0.32,8.54)); +#55646 = VECTOR('',#55647,1.); +#55647 = DIRECTION('',(0.,1.,0.)); +#55648 = PLANE('',#55649); +#55649 = AXIS2_PLACEMENT_3D('',#55650,#55651,#55652); +#55650 = CARTESIAN_POINT('',(0.24,-0.32,8.46)); +#55651 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#55652 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#55653 = ADVANCED_FACE('',(#55654),#55672,.T.); +#55654 = FACE_BOUND('',#55655,.F.); +#55655 = EDGE_LOOP('',(#55656,#55664,#55665,#55666)); +#55656 = ORIENTED_EDGE('',*,*,#55657,.F.); +#55657 = EDGE_CURVE('',#55084,#55658,#55660,.T.); +#55658 = VERTEX_POINT('',#55659); +#55659 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#55660 = LINE('',#55661,#55662); +#55661 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#55662 = VECTOR('',#55663,1.); +#55663 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#55664 = ORIENTED_EDGE('',*,*,#55091,.T.); +#55665 = ORIENTED_EDGE('',*,*,#55635,.T.); +#55666 = ORIENTED_EDGE('',*,*,#55667,.F.); +#55667 = EDGE_CURVE('',#55658,#55636,#55668,.T.); +#55668 = LINE('',#55669,#55670); +#55669 = CARTESIAN_POINT('',(-0.32,0.16,8.54)); +#55670 = VECTOR('',#55671,1.); +#55671 = DIRECTION('',(1.,0.,0.)); +#55672 = PLANE('',#55673); +#55673 = AXIS2_PLACEMENT_3D('',#55674,#55675,#55676); +#55674 = CARTESIAN_POINT('',(-0.32,0.24,8.46)); +#55675 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#55676 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#55677 = ADVANCED_FACE('',(#55678),#55696,.F.); +#55678 = FACE_BOUND('',#55679,.F.); +#55679 = EDGE_LOOP('',(#55680,#55688,#55689,#55690)); +#55680 = ORIENTED_EDGE('',*,*,#55681,.F.); +#55681 = EDGE_CURVE('',#55106,#55682,#55684,.T.); +#55682 = VERTEX_POINT('',#55683); +#55683 = CARTESIAN_POINT('',(-0.16,-0.16,8.54)); +#55684 = LINE('',#55685,#55686); +#55685 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + 8.433333333333)); +#55686 = VECTOR('',#55687,1.); +#55687 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#55688 = ORIENTED_EDGE('',*,*,#55115,.T.); +#55689 = ORIENTED_EDGE('',*,*,#55657,.T.); +#55690 = ORIENTED_EDGE('',*,*,#55691,.F.); +#55691 = EDGE_CURVE('',#55682,#55658,#55692,.T.); +#55692 = LINE('',#55693,#55694); +#55693 = CARTESIAN_POINT('',(-0.16,-0.32,8.54)); +#55694 = VECTOR('',#55695,1.); +#55695 = DIRECTION('',(0.,1.,0.)); +#55696 = PLANE('',#55697); +#55697 = AXIS2_PLACEMENT_3D('',#55698,#55699,#55700); +#55698 = CARTESIAN_POINT('',(-0.24,-0.32,8.46)); +#55699 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#55700 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#55701 = ADVANCED_FACE('',(#55702),#55713,.F.); +#55702 = FACE_BOUND('',#55703,.T.); +#55703 = EDGE_LOOP('',(#55704,#55705,#55706,#55707)); +#55704 = ORIENTED_EDGE('',*,*,#55681,.F.); +#55705 = ORIENTED_EDGE('',*,*,#55132,.T.); +#55706 = ORIENTED_EDGE('',*,*,#55626,.T.); +#55707 = ORIENTED_EDGE('',*,*,#55708,.F.); +#55708 = EDGE_CURVE('',#55682,#55627,#55709,.T.); +#55709 = LINE('',#55710,#55711); +#55710 = CARTESIAN_POINT('',(-0.32,-0.16,8.54)); +#55711 = VECTOR('',#55712,1.); +#55712 = DIRECTION('',(1.,0.,0.)); +#55713 = PLANE('',#55714); +#55714 = AXIS2_PLACEMENT_3D('',#55715,#55716,#55717); +#55715 = CARTESIAN_POINT('',(-0.32,-0.24,8.46)); +#55716 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#55717 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#55718 = ADVANCED_FACE('',(#55719),#55744,.F.); +#55719 = FACE_BOUND('',#55720,.T.); +#55720 = EDGE_LOOP('',(#55721,#55729,#55730,#55738)); +#55721 = ORIENTED_EDGE('',*,*,#55722,.F.); +#55722 = EDGE_CURVE('',#55156,#55723,#55725,.T.); +#55723 = VERTEX_POINT('',#55724); +#55724 = CARTESIAN_POINT('',(-0.16,-2.7,8.54)); +#55725 = LINE('',#55726,#55727); +#55726 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + 8.433333333333)); +#55727 = VECTOR('',#55728,1.); +#55728 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#55729 = ORIENTED_EDGE('',*,*,#55163,.T.); +#55730 = ORIENTED_EDGE('',*,*,#55731,.T.); +#55731 = EDGE_CURVE('',#55147,#55732,#55734,.T.); +#55732 = VERTEX_POINT('',#55733); +#55733 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#55734 = LINE('',#55735,#55736); +#55735 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#55736 = VECTOR('',#55737,1.); +#55737 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#55738 = ORIENTED_EDGE('',*,*,#55739,.F.); +#55739 = EDGE_CURVE('',#55723,#55732,#55740,.T.); +#55740 = LINE('',#55741,#55742); +#55741 = CARTESIAN_POINT('',(-0.32,-2.7,8.54)); +#55742 = VECTOR('',#55743,1.); +#55743 = DIRECTION('',(1.,0.,0.)); +#55744 = PLANE('',#55745); +#55745 = AXIS2_PLACEMENT_3D('',#55746,#55747,#55748); +#55746 = CARTESIAN_POINT('',(-0.32,-2.78,8.46)); +#55747 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#55748 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#55749 = ADVANCED_FACE('',(#55750),#55768,.T.); +#55750 = FACE_BOUND('',#55751,.T.); +#55751 = EDGE_LOOP('',(#55752,#55753,#55754,#55762)); +#55752 = ORIENTED_EDGE('',*,*,#55731,.F.); +#55753 = ORIENTED_EDGE('',*,*,#55187,.T.); +#55754 = ORIENTED_EDGE('',*,*,#55755,.T.); +#55755 = EDGE_CURVE('',#55180,#55756,#55758,.T.); +#55756 = VERTEX_POINT('',#55757); +#55757 = CARTESIAN_POINT('',(0.16,-2.38,8.54)); +#55758 = LINE('',#55759,#55760); +#55759 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + 8.646666666667)); +#55760 = VECTOR('',#55761,1.); +#55761 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#55762 = ORIENTED_EDGE('',*,*,#55763,.F.); +#55763 = EDGE_CURVE('',#55732,#55756,#55764,.T.); +#55764 = LINE('',#55765,#55766); +#55765 = CARTESIAN_POINT('',(0.16,-2.86,8.54)); +#55766 = VECTOR('',#55767,1.); +#55767 = DIRECTION('',(0.,1.,0.)); +#55768 = PLANE('',#55769); +#55769 = AXIS2_PLACEMENT_3D('',#55770,#55771,#55772); +#55770 = CARTESIAN_POINT('',(0.24,-2.86,8.46)); +#55771 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#55772 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#55773 = ADVANCED_FACE('',(#55774),#55792,.T.); +#55774 = FACE_BOUND('',#55775,.F.); +#55775 = EDGE_LOOP('',(#55776,#55784,#55785,#55786)); +#55776 = ORIENTED_EDGE('',*,*,#55777,.F.); +#55777 = EDGE_CURVE('',#55204,#55778,#55780,.T.); +#55778 = VERTEX_POINT('',#55779); +#55779 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#55780 = LINE('',#55781,#55782); +#55781 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#55782 = VECTOR('',#55783,1.); +#55783 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#55784 = ORIENTED_EDGE('',*,*,#55211,.T.); +#55785 = ORIENTED_EDGE('',*,*,#55755,.T.); +#55786 = ORIENTED_EDGE('',*,*,#55787,.F.); +#55787 = EDGE_CURVE('',#55778,#55756,#55788,.T.); +#55788 = LINE('',#55789,#55790); +#55789 = CARTESIAN_POINT('',(-0.32,-2.38,8.54)); +#55790 = VECTOR('',#55791,1.); +#55791 = DIRECTION('',(1.,0.,0.)); +#55792 = PLANE('',#55793); +#55793 = AXIS2_PLACEMENT_3D('',#55794,#55795,#55796); +#55794 = CARTESIAN_POINT('',(-0.32,-2.3,8.46)); +#55795 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#55796 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#55797 = ADVANCED_FACE('',(#55798),#55809,.F.); +#55798 = FACE_BOUND('',#55799,.F.); +#55799 = EDGE_LOOP('',(#55800,#55801,#55802,#55803)); +#55800 = ORIENTED_EDGE('',*,*,#55722,.F.); +#55801 = ORIENTED_EDGE('',*,*,#55228,.T.); +#55802 = ORIENTED_EDGE('',*,*,#55777,.T.); +#55803 = ORIENTED_EDGE('',*,*,#55804,.F.); +#55804 = EDGE_CURVE('',#55723,#55778,#55805,.T.); +#55805 = LINE('',#55806,#55807); +#55806 = CARTESIAN_POINT('',(-0.16,-2.86,8.54)); +#55807 = VECTOR('',#55808,1.); +#55808 = DIRECTION('',(0.,1.,0.)); +#55809 = PLANE('',#55810); +#55810 = AXIS2_PLACEMENT_3D('',#55811,#55812,#55813); +#55811 = CARTESIAN_POINT('',(-0.24,-2.86,8.46)); +#55812 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#55813 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#55814 = ADVANCED_FACE('',(#55815),#55840,.T.); +#55815 = FACE_BOUND('',#55816,.F.); +#55816 = EDGE_LOOP('',(#55817,#55825,#55826,#55834)); +#55817 = ORIENTED_EDGE('',*,*,#55818,.F.); +#55818 = EDGE_CURVE('',#55252,#55819,#55821,.T.); +#55819 = VERTEX_POINT('',#55820); +#55820 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#55821 = LINE('',#55822,#55823); +#55822 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#55823 = VECTOR('',#55824,1.); +#55824 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#55825 = ORIENTED_EDGE('',*,*,#55259,.T.); +#55826 = ORIENTED_EDGE('',*,*,#55827,.T.); +#55827 = EDGE_CURVE('',#55243,#55828,#55830,.T.); +#55828 = VERTEX_POINT('',#55829); +#55829 = CARTESIAN_POINT('',(0.16,-4.92,8.54)); +#55830 = LINE('',#55831,#55832); +#55831 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + 8.646666666667)); +#55832 = VECTOR('',#55833,1.); +#55833 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#55834 = ORIENTED_EDGE('',*,*,#55835,.F.); +#55835 = EDGE_CURVE('',#55819,#55828,#55836,.T.); +#55836 = LINE('',#55837,#55838); +#55837 = CARTESIAN_POINT('',(-0.32,-4.92,8.54)); +#55838 = VECTOR('',#55839,1.); +#55839 = DIRECTION('',(1.,0.,0.)); +#55840 = PLANE('',#55841); +#55841 = AXIS2_PLACEMENT_3D('',#55842,#55843,#55844); +#55842 = CARTESIAN_POINT('',(-0.32,-4.84,8.46)); +#55843 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#55844 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#55845 = ADVANCED_FACE('',(#55846),#55864,.F.); +#55846 = FACE_BOUND('',#55847,.F.); +#55847 = EDGE_LOOP('',(#55848,#55856,#55857,#55858)); +#55848 = ORIENTED_EDGE('',*,*,#55849,.F.); +#55849 = EDGE_CURVE('',#55274,#55850,#55852,.T.); +#55850 = VERTEX_POINT('',#55851); +#55851 = CARTESIAN_POINT('',(-0.16,-5.24,8.54)); +#55852 = LINE('',#55853,#55854); +#55853 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + 8.433333333333)); +#55854 = VECTOR('',#55855,1.); +#55855 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#55856 = ORIENTED_EDGE('',*,*,#55283,.T.); +#55857 = ORIENTED_EDGE('',*,*,#55818,.T.); +#55858 = ORIENTED_EDGE('',*,*,#55859,.F.); +#55859 = EDGE_CURVE('',#55850,#55819,#55860,.T.); +#55860 = LINE('',#55861,#55862); +#55861 = CARTESIAN_POINT('',(-0.16,-5.4,8.54)); +#55862 = VECTOR('',#55863,1.); +#55863 = DIRECTION('',(0.,1.,0.)); +#55864 = PLANE('',#55865); +#55865 = AXIS2_PLACEMENT_3D('',#55866,#55867,#55868); +#55866 = CARTESIAN_POINT('',(-0.24,-5.4,8.46)); +#55867 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#55868 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#55869 = ADVANCED_FACE('',(#55870),#55888,.F.); +#55870 = FACE_BOUND('',#55871,.T.); +#55871 = EDGE_LOOP('',(#55872,#55873,#55874,#55882)); +#55872 = ORIENTED_EDGE('',*,*,#55849,.F.); +#55873 = ORIENTED_EDGE('',*,*,#55307,.T.); +#55874 = ORIENTED_EDGE('',*,*,#55875,.T.); +#55875 = EDGE_CURVE('',#55298,#55876,#55878,.T.); +#55876 = VERTEX_POINT('',#55877); +#55877 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#55878 = LINE('',#55879,#55880); +#55879 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#55880 = VECTOR('',#55881,1.); +#55881 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#55882 = ORIENTED_EDGE('',*,*,#55883,.F.); +#55883 = EDGE_CURVE('',#55850,#55876,#55884,.T.); +#55884 = LINE('',#55885,#55886); +#55885 = CARTESIAN_POINT('',(-0.32,-5.24,8.54)); +#55886 = VECTOR('',#55887,1.); +#55887 = DIRECTION('',(1.,0.,0.)); +#55888 = PLANE('',#55889); +#55889 = AXIS2_PLACEMENT_3D('',#55890,#55891,#55892); +#55890 = CARTESIAN_POINT('',(-0.32,-5.32,8.46)); +#55891 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#55892 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#55893 = ADVANCED_FACE('',(#55894),#55905,.T.); +#55894 = FACE_BOUND('',#55895,.T.); +#55895 = EDGE_LOOP('',(#55896,#55897,#55898,#55899)); +#55896 = ORIENTED_EDGE('',*,*,#55875,.F.); +#55897 = ORIENTED_EDGE('',*,*,#55324,.T.); +#55898 = ORIENTED_EDGE('',*,*,#55827,.T.); +#55899 = ORIENTED_EDGE('',*,*,#55900,.F.); +#55900 = EDGE_CURVE('',#55876,#55828,#55901,.T.); +#55901 = LINE('',#55902,#55903); +#55902 = CARTESIAN_POINT('',(0.16,-5.4,8.54)); +#55903 = VECTOR('',#55904,1.); +#55904 = DIRECTION('',(0.,1.,0.)); +#55905 = PLANE('',#55906); +#55906 = AXIS2_PLACEMENT_3D('',#55907,#55908,#55909); +#55907 = CARTESIAN_POINT('',(0.24,-5.4,8.46)); +#55908 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#55909 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#55910 = ADVANCED_FACE('',(#55911),#55917,.F.); +#55911 = FACE_BOUND('',#55912,.F.); +#55912 = EDGE_LOOP('',(#55913,#55914,#55915,#55916)); +#55913 = ORIENTED_EDGE('',*,*,#55379,.F.); +#55914 = ORIENTED_EDGE('',*,*,#55403,.F.); +#55915 = ORIENTED_EDGE('',*,*,#55420,.T.); +#55916 = ORIENTED_EDGE('',*,*,#55355,.T.); +#55917 = PLANE('',#55918); +#55918 = AXIS2_PLACEMENT_3D('',#55919,#55920,#55921); +#55919 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#55920 = DIRECTION('',(0.,0.,1.)); +#55921 = DIRECTION('',(1.,0.,-0.)); +#55922 = ADVANCED_FACE('',(#55923),#55929,.F.); +#55923 = FACE_BOUND('',#55924,.F.); +#55924 = EDGE_LOOP('',(#55925,#55926,#55927,#55928)); +#55925 = ORIENTED_EDGE('',*,*,#55499,.F.); +#55926 = ORIENTED_EDGE('',*,*,#55516,.F.); +#55927 = ORIENTED_EDGE('',*,*,#55451,.T.); +#55928 = ORIENTED_EDGE('',*,*,#55475,.T.); +#55929 = PLANE('',#55930); +#55930 = AXIS2_PLACEMENT_3D('',#55931,#55932,#55933); +#55931 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#55932 = DIRECTION('',(0.,0.,1.)); +#55933 = DIRECTION('',(1.,0.,-0.)); +#55934 = ADVANCED_FACE('',(#55935),#55941,.F.); +#55935 = FACE_BOUND('',#55936,.F.); +#55936 = EDGE_LOOP('',(#55937,#55938,#55939,#55940)); +#55937 = ORIENTED_EDGE('',*,*,#55547,.F.); +#55938 = ORIENTED_EDGE('',*,*,#55571,.F.); +#55939 = ORIENTED_EDGE('',*,*,#55595,.T.); +#55940 = ORIENTED_EDGE('',*,*,#55612,.T.); +#55941 = PLANE('',#55942); +#55942 = AXIS2_PLACEMENT_3D('',#55943,#55944,#55945); +#55943 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#55944 = DIRECTION('',(0.,0.,1.)); +#55945 = DIRECTION('',(1.,0.,-0.)); +#55946 = ADVANCED_FACE('',(#55947),#55953,.T.); +#55947 = FACE_BOUND('',#55948,.T.); +#55948 = EDGE_LOOP('',(#55949,#55950,#55951,#55952)); +#55949 = ORIENTED_EDGE('',*,*,#55708,.T.); +#55950 = ORIENTED_EDGE('',*,*,#55643,.T.); +#55951 = ORIENTED_EDGE('',*,*,#55667,.F.); +#55952 = ORIENTED_EDGE('',*,*,#55691,.F.); +#55953 = PLANE('',#55954); +#55954 = AXIS2_PLACEMENT_3D('',#55955,#55956,#55957); +#55955 = CARTESIAN_POINT('',(-0.32,-0.32,8.54)); +#55956 = DIRECTION('',(0.,0.,1.)); +#55957 = DIRECTION('',(1.,0.,-0.)); +#55958 = ADVANCED_FACE('',(#55959),#55965,.T.); +#55959 = FACE_BOUND('',#55960,.T.); +#55960 = EDGE_LOOP('',(#55961,#55962,#55963,#55964)); +#55961 = ORIENTED_EDGE('',*,*,#55739,.T.); +#55962 = ORIENTED_EDGE('',*,*,#55763,.T.); +#55963 = ORIENTED_EDGE('',*,*,#55787,.F.); +#55964 = ORIENTED_EDGE('',*,*,#55804,.F.); +#55965 = PLANE('',#55966); +#55966 = AXIS2_PLACEMENT_3D('',#55967,#55968,#55969); +#55967 = CARTESIAN_POINT('',(-0.32,-2.86,8.54)); +#55968 = DIRECTION('',(0.,0.,1.)); +#55969 = DIRECTION('',(1.,0.,-0.)); +#55970 = ADVANCED_FACE('',(#55971),#55977,.T.); +#55971 = FACE_BOUND('',#55972,.T.); +#55972 = EDGE_LOOP('',(#55973,#55974,#55975,#55976)); +#55973 = ORIENTED_EDGE('',*,*,#55883,.T.); +#55974 = ORIENTED_EDGE('',*,*,#55900,.T.); +#55975 = ORIENTED_EDGE('',*,*,#55835,.F.); +#55976 = ORIENTED_EDGE('',*,*,#55859,.F.); +#55977 = PLANE('',#55978); +#55978 = AXIS2_PLACEMENT_3D('',#55979,#55980,#55981); +#55979 = CARTESIAN_POINT('',(-0.32,-5.4,8.54)); +#55980 = DIRECTION('',(0.,0.,1.)); +#55981 = DIRECTION('',(1.,0.,-0.)); +#55982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#55986)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#55983,#55984,#55985)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#55983 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#55984 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#55985 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#55986 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#55983, + 'distance_accuracy_value','confusion accuracy'); +#55987 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#55988,#55990); +#55988 = ( REPRESENTATION_RELATIONSHIP('','',#53875,#53852) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#55989) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#55989 = ITEM_DEFINED_TRANSFORMATION('','',#11,#53853); +#55990 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #55991); +#55991 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('57','=>[0:1:1:33]','',#53847, + #53870,$); +#55992 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#53872)); +#55993 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#55994,#55996); +#55994 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#55995) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#55995 = ITEM_DEFINED_TRANSFORMATION('','',#11,#183); +#55996 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #55997); +#55997 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('59','C35','',#5,#42695,$); +#55998 = SHAPE_DEFINITION_REPRESENTATION(#55999,#56005); +#55999 = PRODUCT_DEFINITION_SHAPE('','',#56000); +#56000 = PRODUCT_DEFINITION('design','',#56001,#56004); +#56001 = PRODUCT_DEFINITION_FORMATION('','',#56002); +#56002 = PRODUCT('SOT-563','SOT-563','',(#56003)); +#56003 = PRODUCT_CONTEXT('',#2,'mechanical'); +#56004 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#56005 = SHAPE_REPRESENTATION('',(#11,#56006),#56010); +#56006 = AXIS2_PLACEMENT_3D('',#56007,#56008,#56009); +#56007 = CARTESIAN_POINT('',(0.,0.,0.)); +#56008 = DIRECTION('',(0.,0.,1.)); +#56009 = DIRECTION('',(1.,0.,-0.)); +#56010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#56014)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#56011,#56012,#56013)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#56011 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#56012 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#56013 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#56014 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#56011, + 'distance_accuracy_value','confusion accuracy'); +#56015 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#56016,#56018); +#56016 = ( REPRESENTATION_RELATIONSHIP('','',#56005,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#56017) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#56017 = ITEM_DEFINED_TRANSFORMATION('','',#11,#187); +#56018 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #56019); +#56019 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('61','U4','',#5,#56000,$); +#56020 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56002)); +#56021 = SHAPE_DEFINITION_REPRESENTATION(#56022,#56028); +#56022 = PRODUCT_DEFINITION_SHAPE('','',#56023); +#56023 = PRODUCT_DEFINITION('design','',#56024,#56027); +#56024 = PRODUCT_DEFINITION_FORMATION('','',#56025); +#56025 = PRODUCT('SOT_563','SOT_563','',(#56026)); +#56026 = PRODUCT_CONTEXT('',#2,'mechanical'); +#56027 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#56028 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#56029),#58658); +#56029 = MANIFOLD_SOLID_BREP('',#56030); +#56030 = CLOSED_SHELL('',(#56031,#56071,#56102,#56232,#56256,#56379, + #56506,#56523,#56546,#56668,#56796,#56813,#56844,#57071,#57102, + #57329,#57360,#57391,#57618,#57746,#57777,#57800,#57922,#57967, + #57999,#58049,#58081,#58098,#58130,#58147,#58179,#58211,#58228, + #58260,#58292,#58309,#58341,#58358,#58390,#58422,#58439,#58456, + #58473,#58496,#58513,#58525,#58542,#58559,#58576,#58588,#58600, + #58612,#58624,#58649)); +#56031 = ADVANCED_FACE('',(#56032),#56066,.F.); +#56032 = FACE_BOUND('',#56033,.F.); +#56033 = EDGE_LOOP('',(#56034,#56044,#56052,#56060)); +#56034 = ORIENTED_EDGE('',*,*,#56035,.F.); +#56035 = EDGE_CURVE('',#56036,#56038,#56040,.T.); +#56036 = VERTEX_POINT('',#56037); +#56037 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56038 = VERTEX_POINT('',#56039); +#56039 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56040 = LINE('',#56041,#56042); +#56041 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56042 = VECTOR('',#56043,1.); +#56043 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56044 = ORIENTED_EDGE('',*,*,#56045,.T.); +#56045 = EDGE_CURVE('',#56036,#56046,#56048,.T.); +#56046 = VERTEX_POINT('',#56047); +#56047 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56048 = LINE('',#56049,#56050); +#56049 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56050 = VECTOR('',#56051,1.); +#56051 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56052 = ORIENTED_EDGE('',*,*,#56053,.T.); +#56053 = EDGE_CURVE('',#56046,#56054,#56056,.T.); +#56054 = VERTEX_POINT('',#56055); +#56055 = CARTESIAN_POINT('',(0.8,0.61,0.)); +#56056 = LINE('',#56057,#56058); +#56057 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56058 = VECTOR('',#56059,1.); +#56059 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56060 = ORIENTED_EDGE('',*,*,#56061,.F.); +#56061 = EDGE_CURVE('',#56038,#56054,#56062,.T.); +#56062 = LINE('',#56063,#56064); +#56063 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56064 = VECTOR('',#56065,1.); +#56065 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56066 = PLANE('',#56067); +#56067 = AXIS2_PLACEMENT_3D('',#56068,#56069,#56070); +#56068 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56069 = DIRECTION('',(0.,0.,1.)); +#56070 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#56071 = ADVANCED_FACE('',(#56072),#56097,.F.); +#56072 = FACE_BOUND('',#56073,.F.); +#56073 = EDGE_LOOP('',(#56074,#56082,#56083,#56091)); +#56074 = ORIENTED_EDGE('',*,*,#56075,.F.); +#56075 = EDGE_CURVE('',#56036,#56076,#56078,.T.); +#56076 = VERTEX_POINT('',#56077); +#56077 = CARTESIAN_POINT('',(0.595807377657,0.39,3.E-02)); +#56078 = LINE('',#56079,#56080); +#56079 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56080 = VECTOR('',#56081,1.); +#56081 = DIRECTION('',(0.,0.,1.)); +#56082 = ORIENTED_EDGE('',*,*,#56035,.T.); +#56083 = ORIENTED_EDGE('',*,*,#56084,.T.); +#56084 = EDGE_CURVE('',#56038,#56085,#56087,.T.); +#56085 = VERTEX_POINT('',#56086); +#56086 = CARTESIAN_POINT('',(0.595807377657,0.61,3.E-02)); +#56087 = LINE('',#56088,#56089); +#56088 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56089 = VECTOR('',#56090,1.); +#56090 = DIRECTION('',(0.,0.,1.)); +#56091 = ORIENTED_EDGE('',*,*,#56092,.F.); +#56092 = EDGE_CURVE('',#56076,#56085,#56093,.T.); +#56093 = LINE('',#56094,#56095); +#56094 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56095 = VECTOR('',#56096,1.); +#56096 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56097 = PLANE('',#56098); +#56098 = AXIS2_PLACEMENT_3D('',#56099,#56100,#56101); +#56099 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56100 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56101 = DIRECTION('',(0.,-0.,1.)); +#56102 = ADVANCED_FACE('',(#56103),#56227,.T.); +#56103 = FACE_BOUND('',#56104,.T.); +#56104 = EDGE_LOOP('',(#56105,#56113,#56114,#56115,#56221)); +#56105 = ORIENTED_EDGE('',*,*,#56106,.F.); +#56106 = EDGE_CURVE('',#56054,#56107,#56109,.T.); +#56107 = VERTEX_POINT('',#56108); +#56108 = CARTESIAN_POINT('',(0.8,0.61,0.11)); +#56109 = LINE('',#56110,#56111); +#56110 = CARTESIAN_POINT('',(0.8,0.61,0.)); +#56111 = VECTOR('',#56112,1.); +#56112 = DIRECTION('',(0.,0.,1.)); +#56113 = ORIENTED_EDGE('',*,*,#56061,.F.); +#56114 = ORIENTED_EDGE('',*,*,#56084,.T.); +#56115 = ORIENTED_EDGE('',*,*,#56116,.T.); +#56116 = EDGE_CURVE('',#56085,#56117,#56119,.T.); +#56117 = VERTEX_POINT('',#56118); +#56118 = CARTESIAN_POINT('',(0.6,0.61,0.11)); +#56119 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56120,#56121,#56122,#56123, + #56124,#56125,#56126,#56127,#56128,#56129,#56130,#56131,#56132, + #56133,#56134,#56135,#56136,#56137,#56138,#56139,#56140,#56141, + #56142,#56143,#56144,#56145,#56146,#56147,#56148,#56149,#56150, + #56151,#56152,#56153,#56154,#56155,#56156,#56157,#56158,#56159, + #56160,#56161,#56162,#56163,#56164,#56165,#56166,#56167,#56168, + #56169,#56170,#56171,#56172,#56173,#56174,#56175,#56176,#56177, + #56178,#56179,#56180,#56181,#56182,#56183,#56184,#56185,#56186, + #56187,#56188,#56189,#56190,#56191,#56192,#56193,#56194,#56195, + #56196,#56197,#56198,#56199,#56200,#56201,#56202,#56203,#56204, + #56205,#56206,#56207,#56208,#56209,#56210,#56211,#56212,#56213, + #56214,#56215,#56216,#56217,#56218,#56219,#56220),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527397E-02,6.000171535369E-02,9.000249028111E-02, + 0.120003210098,0.150003874847,0.180004484568,0.210005039305, + 0.240005539099,0.270005983992,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.42000738639,0.450007502748, + 0.480007564495,0.510007571674,0.540007524325,0.570007422489, + 0.600007266209,0.630007055525,0.660006790478,0.69000647111, + 0.720006097462,0.750005669576,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#56120 = CARTESIAN_POINT('',(0.595807377657,0.61,3.E-02)); +#56121 = CARTESIAN_POINT('',(0.595838822296,0.61,3.059999944783E-02)); +#56122 = CARTESIAN_POINT('',(0.595870266954,0.61,3.119999926388E-02)); +#56123 = CARTESIAN_POINT('',(0.595901711631,0.61,3.179999944803E-02)); +#56124 = CARTESIAN_POINT('',(0.595964600966,0.61,3.299999944838E-02)); +#56125 = CARTESIAN_POINT('',(0.595996045624,0.61,3.359999926458E-02)); +#56126 = CARTESIAN_POINT('',(0.596027490301,0.61,3.419999944858E-02)); +#56127 = CARTESIAN_POINT('',(0.596090379637,0.61,3.539999944893E-02)); +#56128 = CARTESIAN_POINT('',(0.596121824295,0.61,3.599999926526E-02)); +#56129 = CARTESIAN_POINT('',(0.596153268972,0.61,3.659999944913E-02)); +#56130 = CARTESIAN_POINT('',(0.596216158307,0.61,3.779999944948E-02)); +#56131 = CARTESIAN_POINT('',(0.596247602965,0.61,3.839999926595E-02)); +#56132 = CARTESIAN_POINT('',(0.596279047642,0.61,3.899999944968E-02)); +#56133 = CARTESIAN_POINT('',(0.596341936977,0.61,4.019999945003E-02)); +#56134 = CARTESIAN_POINT('',(0.596373381635,0.61,4.079999926664E-02)); +#56135 = CARTESIAN_POINT('',(0.596404826312,0.61,4.139999945023E-02)); +#56136 = CARTESIAN_POINT('',(0.596467715648,0.61,4.259999945058E-02)); +#56137 = CARTESIAN_POINT('',(0.596499160305,0.61,4.319999926733E-02)); +#56138 = CARTESIAN_POINT('',(0.596530604983,0.61,4.379999945078E-02)); +#56139 = CARTESIAN_POINT('',(0.596593494318,0.61,4.499999945112E-02)); +#56140 = CARTESIAN_POINT('',(0.596624938976,0.61,4.559999926801E-02)); +#56141 = CARTESIAN_POINT('',(0.596656383653,0.61,4.619999945133E-02)); +#56142 = CARTESIAN_POINT('',(0.596719272988,0.61,4.739999945167E-02)); +#56143 = CARTESIAN_POINT('',(0.596750717646,0.61,4.79999992687E-02)); +#56144 = CARTESIAN_POINT('',(0.596782162323,0.61,4.859999945188E-02)); +#56145 = CARTESIAN_POINT('',(0.596845051658,0.61,4.979999945222E-02)); +#56146 = CARTESIAN_POINT('',(0.596876496316,0.61,5.039999926939E-02)); +#56147 = CARTESIAN_POINT('',(0.596907940994,0.61,5.099999945242E-02)); +#56148 = CARTESIAN_POINT('',(0.596970830329,0.61,5.219999945277E-02)); +#56149 = CARTESIAN_POINT('',(0.597002274987,0.61,5.279999927007E-02)); +#56150 = CARTESIAN_POINT('',(0.597033719664,0.61,5.339999945297E-02)); +#56151 = CARTESIAN_POINT('',(0.597096608999,0.61,5.459999945331E-02)); +#56152 = CARTESIAN_POINT('',(0.597128053657,0.61,5.519999927076E-02)); +#56153 = CARTESIAN_POINT('',(0.597159498334,0.61,5.579999945351E-02)); +#56154 = CARTESIAN_POINT('',(0.597222387669,0.61,5.699999945386E-02)); +#56155 = CARTESIAN_POINT('',(0.597253832327,0.61,5.759999927144E-02)); +#56156 = CARTESIAN_POINT('',(0.597285277005,0.61,5.819999945406E-02)); +#56157 = CARTESIAN_POINT('',(0.59734816634,0.61,5.93999994544E-02)); +#56158 = CARTESIAN_POINT('',(0.597379610998,0.61,5.999999927213E-02)); +#56159 = CARTESIAN_POINT('',(0.597411055675,0.61,6.059999945461E-02)); +#56160 = CARTESIAN_POINT('',(0.59747394501,0.61,6.179999945495E-02)); +#56161 = CARTESIAN_POINT('',(0.597505389668,0.61,6.239999927281E-02)); +#56162 = CARTESIAN_POINT('',(0.597536834345,0.61,6.299999945515E-02)); +#56163 = CARTESIAN_POINT('',(0.59759972368,0.61,6.419999945549E-02)); +#56164 = CARTESIAN_POINT('',(0.597631168338,0.61,6.479999927349E-02)); +#56165 = CARTESIAN_POINT('',(0.597662613015,0.61,6.539999945569E-02)); +#56166 = CARTESIAN_POINT('',(0.597725502351,0.61,6.659999945604E-02)); +#56167 = CARTESIAN_POINT('',(0.597756947009,0.61,6.719999927417E-02)); +#56168 = CARTESIAN_POINT('',(0.597788391686,0.61,6.779999945624E-02)); +#56169 = CARTESIAN_POINT('',(0.597851281021,0.61,6.899999945658E-02)); +#56170 = CARTESIAN_POINT('',(0.597882725679,0.61,6.959999927485E-02)); +#56171 = CARTESIAN_POINT('',(0.597914170356,0.61,7.019999945678E-02)); +#56172 = CARTESIAN_POINT('',(0.597977059691,0.61,7.139999945712E-02)); +#56173 = CARTESIAN_POINT('',(0.598008504349,0.61,7.199999927553E-02)); +#56174 = CARTESIAN_POINT('',(0.598039949026,0.61,7.259999945732E-02)); +#56175 = CARTESIAN_POINT('',(0.598102838362,0.61,7.379999945766E-02)); +#56176 = CARTESIAN_POINT('',(0.59813428302,0.61,7.439999927621E-02)); +#56177 = CARTESIAN_POINT('',(0.598165727697,0.61,7.499999945787E-02)); +#56178 = CARTESIAN_POINT('',(0.598228617032,0.61,7.619999945821E-02)); +#56179 = CARTESIAN_POINT('',(0.59826006169,0.61,7.679999927689E-02)); +#56180 = CARTESIAN_POINT('',(0.598291506367,0.61,7.739999945841E-02)); +#56181 = CARTESIAN_POINT('',(0.598354395702,0.61,7.859999945875E-02)); +#56182 = CARTESIAN_POINT('',(0.59838584036,0.61,7.919999927757E-02)); +#56183 = CARTESIAN_POINT('',(0.598417285037,0.61,7.979999945895E-02)); +#56184 = CARTESIAN_POINT('',(0.598480174372,0.61,8.099999945929E-02)); +#56185 = CARTESIAN_POINT('',(0.598511619031,0.61,8.159999927825E-02)); +#56186 = CARTESIAN_POINT('',(0.598543063708,0.61,8.219999945949E-02)); +#56187 = CARTESIAN_POINT('',(0.598605953043,0.61,8.339999945983E-02)); +#56188 = CARTESIAN_POINT('',(0.598637397701,0.61,8.399999927893E-02)); +#56189 = CARTESIAN_POINT('',(0.598668842378,0.61,8.459999946003E-02)); +#56190 = CARTESIAN_POINT('',(0.598731731713,0.61,8.579999946037E-02)); +#56191 = CARTESIAN_POINT('',(0.598763176371,0.61,8.63999992796E-02)); +#56192 = CARTESIAN_POINT('',(0.598794621048,0.61,8.699999946057E-02)); +#56193 = CARTESIAN_POINT('',(0.598857510383,0.61,8.819999946091E-02)); +#56194 = CARTESIAN_POINT('',(0.598888955041,0.61,8.879999928028E-02)); +#56195 = CARTESIAN_POINT('',(0.598920399719,0.61,8.939999946111E-02)); +#56196 = CARTESIAN_POINT('',(0.598983289054,0.61,9.059999946145E-02)); +#56197 = CARTESIAN_POINT('',(0.599014733712,0.61,9.119999928096E-02)); +#56198 = CARTESIAN_POINT('',(0.599046178389,0.61,9.179999946165E-02)); +#56199 = CARTESIAN_POINT('',(0.599109067724,0.61,9.299999946199E-02)); +#56200 = CARTESIAN_POINT('',(0.599140512382,0.61,9.359999928163E-02)); +#56201 = CARTESIAN_POINT('',(0.599171957059,0.61,9.419999946219E-02)); +#56202 = CARTESIAN_POINT('',(0.599234846394,0.61,9.539999946253E-02)); +#56203 = CARTESIAN_POINT('',(0.599266291052,0.61,9.599999928231E-02)); +#56204 = CARTESIAN_POINT('',(0.599297735729,0.61,9.659999946273E-02)); +#56205 = CARTESIAN_POINT('',(0.599360625065,0.61,9.779999946306E-02)); +#56206 = CARTESIAN_POINT('',(0.599392069723,0.61,9.839999928298E-02)); +#56207 = CARTESIAN_POINT('',(0.5994235144,0.61,9.899999946326E-02)); +#56208 = CARTESIAN_POINT('',(0.599486403735,0.61,0.100199999464)); +#56209 = CARTESIAN_POINT('',(0.599517848393,0.61,0.100799999284)); +#56210 = CARTESIAN_POINT('',(0.59954929307,0.61,0.101399999464)); +#56211 = CARTESIAN_POINT('',(0.599612182405,0.61,0.102599999464)); +#56212 = CARTESIAN_POINT('',(0.599643627063,0.61,0.103199999284)); +#56213 = CARTESIAN_POINT('',(0.59967507174,0.61,0.103799999464)); +#56214 = CARTESIAN_POINT('',(0.599737961076,0.61,0.104999999465)); +#56215 = CARTESIAN_POINT('',(0.599769405734,0.61,0.105599999285)); +#56216 = CARTESIAN_POINT('',(0.599800850411,0.61,0.106199999465)); +#56217 = CARTESIAN_POINT('',(0.59987422128,0.61,0.107599999045)); +#56218 = CARTESIAN_POINT('',(0.599916147486,0.61,0.108399998725)); +#56219 = CARTESIAN_POINT('',(0.599958073726,0.61,0.109199999043)); +#56220 = CARTESIAN_POINT('',(0.6,0.61,0.11)); +#56221 = ORIENTED_EDGE('',*,*,#56222,.T.); +#56222 = EDGE_CURVE('',#56117,#56107,#56223,.T.); +#56223 = LINE('',#56224,#56225); +#56224 = CARTESIAN_POINT('',(0.595807377657,0.61,0.11)); +#56225 = VECTOR('',#56226,1.); +#56226 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56227 = PLANE('',#56228); +#56228 = AXIS2_PLACEMENT_3D('',#56229,#56230,#56231); +#56229 = CARTESIAN_POINT('',(0.595807377657,0.61,0.)); +#56230 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56231 = DIRECTION('',(0.,0.,1.)); +#56232 = ADVANCED_FACE('',(#56233),#56251,.T.); +#56233 = FACE_BOUND('',#56234,.T.); +#56234 = EDGE_LOOP('',(#56235,#56243,#56244,#56245)); +#56235 = ORIENTED_EDGE('',*,*,#56236,.F.); +#56236 = EDGE_CURVE('',#56046,#56237,#56239,.T.); +#56237 = VERTEX_POINT('',#56238); +#56238 = CARTESIAN_POINT('',(0.8,0.39,0.11)); +#56239 = LINE('',#56240,#56241); +#56240 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56241 = VECTOR('',#56242,1.); +#56242 = DIRECTION('',(0.,0.,1.)); +#56243 = ORIENTED_EDGE('',*,*,#56053,.T.); +#56244 = ORIENTED_EDGE('',*,*,#56106,.T.); +#56245 = ORIENTED_EDGE('',*,*,#56246,.F.); +#56246 = EDGE_CURVE('',#56237,#56107,#56247,.T.); +#56247 = LINE('',#56248,#56249); +#56248 = CARTESIAN_POINT('',(0.8,0.39,0.11)); +#56249 = VECTOR('',#56250,1.); +#56250 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56251 = PLANE('',#56252); +#56252 = AXIS2_PLACEMENT_3D('',#56253,#56254,#56255); +#56253 = CARTESIAN_POINT('',(0.8,0.39,0.)); +#56254 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56255 = DIRECTION('',(0.,-0.,1.)); +#56256 = ADVANCED_FACE('',(#56257),#56374,.F.); +#56257 = FACE_BOUND('',#56258,.F.); +#56258 = EDGE_LOOP('',(#56259,#56260,#56261,#56262,#56368)); +#56259 = ORIENTED_EDGE('',*,*,#56236,.F.); +#56260 = ORIENTED_EDGE('',*,*,#56045,.F.); +#56261 = ORIENTED_EDGE('',*,*,#56075,.T.); +#56262 = ORIENTED_EDGE('',*,*,#56263,.T.); +#56263 = EDGE_CURVE('',#56076,#56264,#56266,.T.); +#56264 = VERTEX_POINT('',#56265); +#56265 = CARTESIAN_POINT('',(0.6,0.39,0.11)); +#56266 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56267,#56268,#56269,#56270, + #56271,#56272,#56273,#56274,#56275,#56276,#56277,#56278,#56279, + #56280,#56281,#56282,#56283,#56284,#56285,#56286,#56287,#56288, + #56289,#56290,#56291,#56292,#56293,#56294,#56295,#56296,#56297, + #56298,#56299,#56300,#56301,#56302,#56303,#56304,#56305,#56306, + #56307,#56308,#56309,#56310,#56311,#56312,#56313,#56314,#56315, + #56316,#56317,#56318,#56319,#56320,#56321,#56322,#56323,#56324, + #56325,#56326,#56327,#56328,#56329,#56330,#56331,#56332,#56333, + #56334,#56335,#56336,#56337,#56338,#56339,#56340,#56341,#56342, + #56343,#56344,#56345,#56346,#56347,#56348,#56349,#56350,#56351, + #56352,#56353,#56354,#56355,#56356,#56357,#56358,#56359,#56360, + #56361,#56362,#56363,#56364,#56365,#56366,#56367),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.00003729932E-02,6.000072272729E-02,9.000104922036E-02, + 0.12000135249,0.150001632556,0.180001889434,0.210002123143, + 0.240002333701,0.270002521127,0.300002685437,0.33000282665, + 0.360002944784,0.390003039857,0.420003111886,0.45000316089, + 0.480003186886,0.510003189893,0.540003169927,0.570003127007, + 0.600003061151,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.810001959429, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.960000488289,1.),.UNSPECIFIED.); +#56267 = CARTESIAN_POINT('',(0.595807377657,0.39,3.E-02)); +#56268 = CARTESIAN_POINT('',(0.595838822313,0.39,3.059999976731E-02)); +#56269 = CARTESIAN_POINT('',(0.595870266976,0.39,3.119999968979E-02)); +#56270 = CARTESIAN_POINT('',(0.595901711648,0.39,3.179999976739E-02)); +#56271 = CARTESIAN_POINT('',(0.595964600983,0.39,3.299999976754E-02)); +#56272 = CARTESIAN_POINT('',(0.595996045647,0.39,3.359999969008E-02)); +#56273 = CARTESIAN_POINT('',(0.596027490318,0.39,3.419999976763E-02)); +#56274 = CARTESIAN_POINT('',(0.596090379653,0.39,3.539999976777E-02)); +#56275 = CARTESIAN_POINT('',(0.596121824317,0.39,3.599999969038E-02)); +#56276 = CARTESIAN_POINT('',(0.596153268988,0.39,3.659999976786E-02)); +#56277 = CARTESIAN_POINT('',(0.596216158324,0.39,3.779999976801E-02)); +#56278 = CARTESIAN_POINT('',(0.596247602987,0.39,3.839999969067E-02)); +#56279 = CARTESIAN_POINT('',(0.596279047659,0.39,3.899999976809E-02)); +#56280 = CARTESIAN_POINT('',(0.596341936994,0.39,4.019999976824E-02)); +#56281 = CARTESIAN_POINT('',(0.596373381657,0.39,4.079999969097E-02)); +#56282 = CARTESIAN_POINT('',(0.596404826329,0.39,4.139999976833E-02)); +#56283 = CARTESIAN_POINT('',(0.596467715664,0.39,4.259999976848E-02)); +#56284 = CARTESIAN_POINT('',(0.596499160328,0.39,4.319999969126E-02)); +#56285 = CARTESIAN_POINT('',(0.596530604999,0.39,4.379999976856E-02)); +#56286 = CARTESIAN_POINT('',(0.596593494334,0.39,4.499999976871E-02)); +#56287 = CARTESIAN_POINT('',(0.596624938998,0.39,4.559999969155E-02)); +#56288 = CARTESIAN_POINT('',(0.59665638367,0.39,4.61999997688E-02)); +#56289 = CARTESIAN_POINT('',(0.596719273005,0.39,4.739999976894E-02)); +#56290 = CARTESIAN_POINT('',(0.596750717668,0.39,4.799999969185E-02)); +#56291 = CARTESIAN_POINT('',(0.59678216234,0.39,4.859999976903E-02)); +#56292 = CARTESIAN_POINT('',(0.596845051675,0.39,4.979999976918E-02)); +#56293 = CARTESIAN_POINT('',(0.596876496339,0.39,5.039999969214E-02)); +#56294 = CARTESIAN_POINT('',(0.59690794101,0.39,5.099999976926E-02)); +#56295 = CARTESIAN_POINT('',(0.596970830345,0.39,5.219999976941E-02)); +#56296 = CARTESIAN_POINT('',(0.597002275009,0.39,5.279999969243E-02)); +#56297 = CARTESIAN_POINT('',(0.59703371968,0.39,5.339999976949E-02)); +#56298 = CARTESIAN_POINT('',(0.597096609016,0.39,5.459999976964E-02)); +#56299 = CARTESIAN_POINT('',(0.597128053679,0.39,5.519999969272E-02)); +#56300 = CARTESIAN_POINT('',(0.597159498351,0.39,5.579999976973E-02)); +#56301 = CARTESIAN_POINT('',(0.597222387686,0.39,5.699999976987E-02)); +#56302 = CARTESIAN_POINT('',(0.597253832349,0.39,5.759999969302E-02)); +#56303 = CARTESIAN_POINT('',(0.597285277021,0.39,5.819999976996E-02)); +#56304 = CARTESIAN_POINT('',(0.597348166356,0.39,5.939999977011E-02)); +#56305 = CARTESIAN_POINT('',(0.59737961102,0.39,5.999999969331E-02)); +#56306 = CARTESIAN_POINT('',(0.597411055691,0.39,6.059999977019E-02)); +#56307 = CARTESIAN_POINT('',(0.597473945027,0.39,6.179999977034E-02)); +#56308 = CARTESIAN_POINT('',(0.59750538969,0.39,6.23999996936E-02)); +#56309 = CARTESIAN_POINT('',(0.597536834362,0.39,6.299999977042E-02)); +#56310 = CARTESIAN_POINT('',(0.597599723697,0.39,6.419999977057E-02)); +#56311 = CARTESIAN_POINT('',(0.59763116836,0.39,6.479999969389E-02)); +#56312 = CARTESIAN_POINT('',(0.597662613032,0.39,6.539999977066E-02)); +#56313 = CARTESIAN_POINT('',(0.597725502367,0.39,6.65999997708E-02)); +#56314 = CARTESIAN_POINT('',(0.597756947031,0.39,6.719999969418E-02)); +#56315 = CARTESIAN_POINT('',(0.597788391702,0.39,6.779999977089E-02)); +#56316 = CARTESIAN_POINT('',(0.597851281037,0.39,6.899999977103E-02)); +#56317 = CARTESIAN_POINT('',(0.597882725701,0.39,6.959999969447E-02)); +#56318 = CARTESIAN_POINT('',(0.597914170373,0.39,7.019999977112E-02)); +#56319 = CARTESIAN_POINT('',(0.597977059708,0.39,7.139999977126E-02)); +#56320 = CARTESIAN_POINT('',(0.598008504371,0.39,7.199999969476E-02)); +#56321 = CARTESIAN_POINT('',(0.598039949043,0.39,7.259999977135E-02)); +#56322 = CARTESIAN_POINT('',(0.598102838378,0.39,7.379999977149E-02)); +#56323 = CARTESIAN_POINT('',(0.598134283042,0.39,7.439999969505E-02)); +#56324 = CARTESIAN_POINT('',(0.598165727713,0.39,7.499999977158E-02)); +#56325 = CARTESIAN_POINT('',(0.598228617048,0.39,7.619999977173E-02)); +#56326 = CARTESIAN_POINT('',(0.598260061712,0.39,7.679999969534E-02)); +#56327 = CARTESIAN_POINT('',(0.598291506383,0.39,7.739999977181E-02)); +#56328 = CARTESIAN_POINT('',(0.598354395719,0.39,7.859999977196E-02)); +#56329 = CARTESIAN_POINT('',(0.598385840382,0.39,7.919999969563E-02)); +#56330 = CARTESIAN_POINT('',(0.598417285054,0.39,7.979999977204E-02)); +#56331 = CARTESIAN_POINT('',(0.598480174389,0.39,8.099999977219E-02)); +#56332 = CARTESIAN_POINT('',(0.598511619052,0.39,8.159999969592E-02)); +#56333 = CARTESIAN_POINT('',(0.598543063724,0.39,8.219999977227E-02)); +#56334 = CARTESIAN_POINT('',(0.598605953059,0.39,8.339999977242E-02)); +#56335 = CARTESIAN_POINT('',(0.598637397723,0.39,8.399999969621E-02)); +#56336 = CARTESIAN_POINT('',(0.598668842394,0.39,8.45999997725E-02)); +#56337 = CARTESIAN_POINT('',(0.598731731729,0.39,8.579999977265E-02)); +#56338 = CARTESIAN_POINT('',(0.598763176393,0.39,8.63999996965E-02)); +#56339 = CARTESIAN_POINT('',(0.598794621065,0.39,8.699999977273E-02)); +#56340 = CARTESIAN_POINT('',(0.5988575104,0.39,8.819999977288E-02)); +#56341 = CARTESIAN_POINT('',(0.598888955063,0.39,8.879999969679E-02)); +#56342 = CARTESIAN_POINT('',(0.598920399735,0.39,8.939999977296E-02)); +#56343 = CARTESIAN_POINT('',(0.59898328907,0.39,9.059999977311E-02)); +#56344 = CARTESIAN_POINT('',(0.599014733734,0.39,9.119999969708E-02)); +#56345 = CARTESIAN_POINT('',(0.599046178405,0.39,9.179999977319E-02)); +#56346 = CARTESIAN_POINT('',(0.59910906774,0.39,9.299999977334E-02)); +#56347 = CARTESIAN_POINT('',(0.599140512404,0.39,9.359999969737E-02)); +#56348 = CARTESIAN_POINT('',(0.599171957075,0.39,9.419999977342E-02)); +#56349 = CARTESIAN_POINT('',(0.599234846411,0.39,9.539999977356E-02)); +#56350 = CARTESIAN_POINT('',(0.599266291074,0.39,9.599999969765E-02)); +#56351 = CARTESIAN_POINT('',(0.599297735746,0.39,9.659999977365E-02)); +#56352 = CARTESIAN_POINT('',(0.599360625081,0.39,9.779999977379E-02)); +#56353 = CARTESIAN_POINT('',(0.599392069744,0.39,9.839999969794E-02)); +#56354 = CARTESIAN_POINT('',(0.599423514416,0.39,9.899999977388E-02)); +#56355 = CARTESIAN_POINT('',(0.599486403751,0.39,0.100199999774)); +#56356 = CARTESIAN_POINT('',(0.599517848415,0.39,0.100799999698)); +#56357 = CARTESIAN_POINT('',(0.599549293086,0.39,0.101399999774)); +#56358 = CARTESIAN_POINT('',(0.599612182421,0.39,0.102599999774)); +#56359 = CARTESIAN_POINT('',(0.599643627085,0.39,0.103199999699)); +#56360 = CARTESIAN_POINT('',(0.599675071757,0.39,0.103799999774)); +#56361 = CARTESIAN_POINT('',(0.599737961092,0.39,0.104999999774)); +#56362 = CARTESIAN_POINT('',(0.599769405755,0.39,0.105599999699)); +#56363 = CARTESIAN_POINT('',(0.599800850427,0.39,0.106199999775)); +#56364 = CARTESIAN_POINT('',(0.599874221309,0.39,0.107599999598)); +#56365 = CARTESIAN_POINT('',(0.599916147525,0.39,0.108399999463)); +#56366 = CARTESIAN_POINT('',(0.599958073755,0.39,0.109199999597)); +#56367 = CARTESIAN_POINT('',(0.6,0.39,0.11)); +#56368 = ORIENTED_EDGE('',*,*,#56369,.T.); +#56369 = EDGE_CURVE('',#56264,#56237,#56370,.T.); +#56370 = LINE('',#56371,#56372); +#56371 = CARTESIAN_POINT('',(0.595807377657,0.39,0.11)); +#56372 = VECTOR('',#56373,1.); +#56373 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56374 = PLANE('',#56375); +#56375 = AXIS2_PLACEMENT_3D('',#56376,#56377,#56378); +#56376 = CARTESIAN_POINT('',(0.595807377657,0.39,0.)); +#56377 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56378 = DIRECTION('',(0.,0.,1.)); +#56379 = ADVANCED_FACE('',(#56380),#56501,.T.); +#56380 = FACE_BOUND('',#56381,.T.); +#56381 = EDGE_LOOP('',(#56382,#56392,#56400,#56406,#56407,#56415,#56423, + #56431,#56439,#56447,#56455,#56463,#56471,#56479,#56487,#56495)); +#56382 = ORIENTED_EDGE('',*,*,#56383,.F.); +#56383 = EDGE_CURVE('',#56384,#56386,#56388,.T.); +#56384 = VERTEX_POINT('',#56385); +#56385 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56386 = VERTEX_POINT('',#56387); +#56387 = CARTESIAN_POINT('',(-0.595807377657,0.61,3.E-02)); +#56388 = LINE('',#56389,#56390); +#56389 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56390 = VECTOR('',#56391,1.); +#56391 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56392 = ORIENTED_EDGE('',*,*,#56393,.F.); +#56393 = EDGE_CURVE('',#56394,#56384,#56396,.T.); +#56394 = VERTEX_POINT('',#56395); +#56395 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56396 = LINE('',#56397,#56398); +#56397 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56398 = VECTOR('',#56399,1.); +#56399 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#56400 = ORIENTED_EDGE('',*,*,#56401,.F.); +#56401 = EDGE_CURVE('',#56085,#56394,#56402,.T.); +#56402 = LINE('',#56403,#56404); +#56403 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56404 = VECTOR('',#56405,1.); +#56405 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56406 = ORIENTED_EDGE('',*,*,#56092,.F.); +#56407 = ORIENTED_EDGE('',*,*,#56408,.F.); +#56408 = EDGE_CURVE('',#56409,#56076,#56411,.T.); +#56409 = VERTEX_POINT('',#56410); +#56410 = CARTESIAN_POINT('',(0.595807377657,0.11,3.E-02)); +#56411 = LINE('',#56412,#56413); +#56412 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56413 = VECTOR('',#56414,1.); +#56414 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56415 = ORIENTED_EDGE('',*,*,#56416,.F.); +#56416 = EDGE_CURVE('',#56417,#56409,#56419,.T.); +#56417 = VERTEX_POINT('',#56418); +#56418 = CARTESIAN_POINT('',(0.595807377657,-0.11,3.E-02)); +#56419 = LINE('',#56420,#56421); +#56420 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56421 = VECTOR('',#56422,1.); +#56422 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56423 = ORIENTED_EDGE('',*,*,#56424,.F.); +#56424 = EDGE_CURVE('',#56425,#56417,#56427,.T.); +#56425 = VERTEX_POINT('',#56426); +#56426 = CARTESIAN_POINT('',(0.595807377657,-0.39,3.E-02)); +#56427 = LINE('',#56428,#56429); +#56428 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56429 = VECTOR('',#56430,1.); +#56430 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56431 = ORIENTED_EDGE('',*,*,#56432,.F.); +#56432 = EDGE_CURVE('',#56433,#56425,#56435,.T.); +#56433 = VERTEX_POINT('',#56434); +#56434 = CARTESIAN_POINT('',(0.595807377657,-0.61,3.E-02)); +#56435 = LINE('',#56436,#56437); +#56436 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56437 = VECTOR('',#56438,1.); +#56438 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56439 = ORIENTED_EDGE('',*,*,#56440,.F.); +#56440 = EDGE_CURVE('',#56441,#56433,#56443,.T.); +#56441 = VERTEX_POINT('',#56442); +#56442 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56443 = LINE('',#56444,#56445); +#56444 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56445 = VECTOR('',#56446,1.); +#56446 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56447 = ORIENTED_EDGE('',*,*,#56448,.F.); +#56448 = EDGE_CURVE('',#56449,#56441,#56451,.T.); +#56449 = VERTEX_POINT('',#56450); +#56450 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#56451 = LINE('',#56452,#56453); +#56452 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#56453 = VECTOR('',#56454,1.); +#56454 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#56455 = ORIENTED_EDGE('',*,*,#56456,.F.); +#56456 = EDGE_CURVE('',#56457,#56449,#56459,.T.); +#56457 = VERTEX_POINT('',#56458); +#56458 = CARTESIAN_POINT('',(-0.595807377657,-0.61,3.E-02)); +#56459 = LINE('',#56460,#56461); +#56460 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56461 = VECTOR('',#56462,1.); +#56462 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56463 = ORIENTED_EDGE('',*,*,#56464,.F.); +#56464 = EDGE_CURVE('',#56465,#56457,#56467,.T.); +#56465 = VERTEX_POINT('',#56466); +#56466 = CARTESIAN_POINT('',(-0.595807377657,-0.39,3.E-02)); +#56467 = LINE('',#56468,#56469); +#56468 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56469 = VECTOR('',#56470,1.); +#56470 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56471 = ORIENTED_EDGE('',*,*,#56472,.F.); +#56472 = EDGE_CURVE('',#56473,#56465,#56475,.T.); +#56473 = VERTEX_POINT('',#56474); +#56474 = CARTESIAN_POINT('',(-0.595807377657,-0.11,3.E-02)); +#56475 = LINE('',#56476,#56477); +#56476 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56477 = VECTOR('',#56478,1.); +#56478 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56479 = ORIENTED_EDGE('',*,*,#56480,.F.); +#56480 = EDGE_CURVE('',#56481,#56473,#56483,.T.); +#56481 = VERTEX_POINT('',#56482); +#56482 = CARTESIAN_POINT('',(-0.595807377657,0.11,3.E-02)); +#56483 = LINE('',#56484,#56485); +#56484 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56485 = VECTOR('',#56486,1.); +#56486 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56487 = ORIENTED_EDGE('',*,*,#56488,.F.); +#56488 = EDGE_CURVE('',#56489,#56481,#56491,.T.); +#56489 = VERTEX_POINT('',#56490); +#56490 = CARTESIAN_POINT('',(-0.595807377657,0.39,3.E-02)); +#56491 = LINE('',#56492,#56493); +#56492 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56493 = VECTOR('',#56494,1.); +#56494 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56495 = ORIENTED_EDGE('',*,*,#56496,.F.); +#56496 = EDGE_CURVE('',#56386,#56489,#56497,.T.); +#56497 = LINE('',#56498,#56499); +#56498 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56499 = VECTOR('',#56500,1.); +#56500 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56501 = PLANE('',#56502); +#56502 = AXIS2_PLACEMENT_3D('',#56503,#56504,#56505); +#56503 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56504 = DIRECTION('',(0.,0.,-1.)); +#56505 = DIRECTION('',(0.599325006491,-0.800505800475,0.)); +#56506 = ADVANCED_FACE('',(#56507),#56518,.T.); +#56507 = FACE_BOUND('',#56508,.T.); +#56508 = EDGE_LOOP('',(#56509,#56515,#56516,#56517)); +#56509 = ORIENTED_EDGE('',*,*,#56510,.F.); +#56510 = EDGE_CURVE('',#56264,#56117,#56511,.T.); +#56511 = LINE('',#56512,#56513); +#56512 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56513 = VECTOR('',#56514,1.); +#56514 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56515 = ORIENTED_EDGE('',*,*,#56369,.T.); +#56516 = ORIENTED_EDGE('',*,*,#56246,.T.); +#56517 = ORIENTED_EDGE('',*,*,#56222,.F.); +#56518 = PLANE('',#56519); +#56519 = AXIS2_PLACEMENT_3D('',#56520,#56521,#56522); +#56520 = CARTESIAN_POINT('',(0.595807377657,0.39,0.11)); +#56521 = DIRECTION('',(0.,0.,1.)); +#56522 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#56523 = ADVANCED_FACE('',(#56524),#56541,.T.); +#56524 = FACE_BOUND('',#56525,.T.); +#56525 = EDGE_LOOP('',(#56526,#56527,#56528,#56535)); +#56526 = ORIENTED_EDGE('',*,*,#56116,.F.); +#56527 = ORIENTED_EDGE('',*,*,#56401,.T.); +#56528 = ORIENTED_EDGE('',*,*,#56529,.T.); +#56529 = EDGE_CURVE('',#56394,#56530,#56532,.T.); +#56530 = VERTEX_POINT('',#56531); +#56531 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56532 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56533,#56534),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56533 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56534 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56535 = ORIENTED_EDGE('',*,*,#56536,.F.); +#56536 = EDGE_CURVE('',#56117,#56530,#56537,.T.); +#56537 = LINE('',#56538,#56539); +#56538 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56539 = VECTOR('',#56540,1.); +#56540 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56541 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56542,#56543) + ,(#56544,#56545 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56542 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56543 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56544 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56545 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56546 = ADVANCED_FACE('',(#56547),#56663,.T.); +#56547 = FACE_BOUND('',#56548,.T.); +#56548 = EDGE_LOOP('',(#56549,#56655,#56656,#56657)); +#56549 = ORIENTED_EDGE('',*,*,#56550,.F.); +#56550 = EDGE_CURVE('',#56409,#56551,#56553,.T.); +#56551 = VERTEX_POINT('',#56552); +#56552 = CARTESIAN_POINT('',(0.6,0.11,0.11)); +#56553 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56554,#56555,#56556,#56557, + #56558,#56559,#56560,#56561,#56562,#56563,#56564,#56565,#56566, + #56567,#56568,#56569,#56570,#56571,#56572,#56573,#56574,#56575, + #56576,#56577,#56578,#56579,#56580,#56581,#56582,#56583,#56584, + #56585,#56586,#56587,#56588,#56589,#56590,#56591,#56592,#56593, + #56594,#56595,#56596,#56597,#56598,#56599,#56600,#56601,#56602, + #56603,#56604,#56605,#56606,#56607,#56608,#56609,#56610,#56611, + #56612,#56613,#56614,#56615,#56616,#56617,#56618,#56619,#56620, + #56621,#56622,#56623,#56624,#56625,#56626,#56627,#56628,#56629, + #56630,#56631,#56632,#56633,#56634,#56635,#56636,#56637,#56638, + #56639,#56640,#56641,#56642,#56643,#56644,#56645,#56646,#56647, + #56648,#56649,#56650,#56651,#56652,#56653,#56654),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027794E-02,6.000005866755E-02,9.000008517035E-02, + 0.120000109788,0.150000132521,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256573, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248472,0.630000241265,0.660000232199,0.690000221276, + 0.720000208498,0.750000193864,0.780000177378,0.810000159041, + 0.840000138853,0.870000116817,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#56554 = CARTESIAN_POINT('',(0.595807377657,0.11,3.E-02)); +#56555 = CARTESIAN_POINT('',(0.595838822324,0.11,3.059999998111E-02)); +#56556 = CARTESIAN_POINT('',(0.595870266991,0.11,3.119999997481E-02)); +#56557 = CARTESIAN_POINT('',(0.595901711659,0.11,3.179999998111E-02)); +#56558 = CARTESIAN_POINT('',(0.595964600994,0.11,3.299999998113E-02)); +#56559 = CARTESIAN_POINT('',(0.595996045661,0.11,3.359999997484E-02)); +#56560 = CARTESIAN_POINT('',(0.596027490329,0.11,3.419999998113E-02)); +#56561 = CARTESIAN_POINT('',(0.596090379664,0.11,3.539999998115E-02)); +#56562 = CARTESIAN_POINT('',(0.596121824332,0.11,3.599999997486E-02)); +#56563 = CARTESIAN_POINT('',(0.596153269,0.11,3.659999998115E-02)); +#56564 = CARTESIAN_POINT('',(0.596216158335,0.11,3.779999998117E-02)); +#56565 = CARTESIAN_POINT('',(0.596247603002,0.11,3.839999997489E-02)); +#56566 = CARTESIAN_POINT('',(0.59627904767,0.11,3.899999998117E-02)); +#56567 = CARTESIAN_POINT('',(0.596341937005,0.11,4.019999998118E-02)); +#56568 = CARTESIAN_POINT('',(0.596373381672,0.11,4.079999997491E-02)); +#56569 = CARTESIAN_POINT('',(0.59640482634,0.11,4.139999998119E-02)); +#56570 = CARTESIAN_POINT('',(0.596467715675,0.11,4.25999999812E-02)); +#56571 = CARTESIAN_POINT('',(0.596499160343,0.11,4.319999997494E-02)); +#56572 = CARTESIAN_POINT('',(0.59653060501,0.11,4.379999998121E-02)); +#56573 = CARTESIAN_POINT('',(0.596593494346,0.11,4.499999998122E-02)); +#56574 = CARTESIAN_POINT('',(0.596624939013,0.11,4.559999997496E-02)); +#56575 = CARTESIAN_POINT('',(0.596656383681,0.11,4.619999998123E-02)); +#56576 = CARTESIAN_POINT('',(0.596719273016,0.11,4.739999998124E-02)); +#56577 = CARTESIAN_POINT('',(0.596750717683,0.11,4.799999997498E-02)); +#56578 = CARTESIAN_POINT('',(0.596782162351,0.11,4.859999998125E-02)); +#56579 = CARTESIAN_POINT('',(0.596845051686,0.11,4.979999998126E-02)); +#56580 = CARTESIAN_POINT('',(0.596876496353,0.11,5.039999997501E-02)); +#56581 = CARTESIAN_POINT('',(0.596907941021,0.11,5.099999998127E-02)); +#56582 = CARTESIAN_POINT('',(0.596970830356,0.11,5.219999998128E-02)); +#56583 = CARTESIAN_POINT('',(0.597002275024,0.11,5.279999997503E-02)); +#56584 = CARTESIAN_POINT('',(0.597033719692,0.11,5.339999998129E-02)); +#56585 = CARTESIAN_POINT('',(0.597096609027,0.11,5.45999999813E-02)); +#56586 = CARTESIAN_POINT('',(0.597128053694,0.11,5.519999997506E-02)); +#56587 = CARTESIAN_POINT('',(0.597159498362,0.11,5.579999998131E-02)); +#56588 = CARTESIAN_POINT('',(0.597222387697,0.11,5.699999998132E-02)); +#56589 = CARTESIAN_POINT('',(0.597253832364,0.11,5.759999997508E-02)); +#56590 = CARTESIAN_POINT('',(0.597285277032,0.11,5.819999998133E-02)); +#56591 = CARTESIAN_POINT('',(0.597348166367,0.11,5.939999998134E-02)); +#56592 = CARTESIAN_POINT('',(0.597379611035,0.11,5.99999999751E-02)); +#56593 = CARTESIAN_POINT('',(0.597411055702,0.11,6.059999998134E-02)); +#56594 = CARTESIAN_POINT('',(0.597473945038,0.11,6.179999998136E-02)); +#56595 = CARTESIAN_POINT('',(0.597505389705,0.11,6.239999997513E-02)); +#56596 = CARTESIAN_POINT('',(0.597536834373,0.11,6.299999998136E-02)); +#56597 = CARTESIAN_POINT('',(0.597599723708,0.11,6.419999998138E-02)); +#56598 = CARTESIAN_POINT('',(0.597631168375,0.11,6.479999997515E-02)); +#56599 = CARTESIAN_POINT('',(0.597662613043,0.11,6.539999998138E-02)); +#56600 = CARTESIAN_POINT('',(0.597725502378,0.11,6.659999998139E-02)); +#56601 = CARTESIAN_POINT('',(0.597756947045,0.11,6.719999997518E-02)); +#56602 = CARTESIAN_POINT('',(0.597788391713,0.11,6.77999999814E-02)); +#56603 = CARTESIAN_POINT('',(0.597851281048,0.11,6.899999998141E-02)); +#56604 = CARTESIAN_POINT('',(0.597882725716,0.11,6.95999999752E-02)); +#56605 = CARTESIAN_POINT('',(0.597914170384,0.11,7.019999998142E-02)); +#56606 = CARTESIAN_POINT('',(0.597977059719,0.11,7.139999998143E-02)); +#56607 = CARTESIAN_POINT('',(0.598008504386,0.11,7.199999997522E-02)); +#56608 = CARTESIAN_POINT('',(0.598039949054,0.11,7.259999998144E-02)); +#56609 = CARTESIAN_POINT('',(0.598102838389,0.11,7.379999998145E-02)); +#56610 = CARTESIAN_POINT('',(0.598134283056,0.11,7.439999997525E-02)); +#56611 = CARTESIAN_POINT('',(0.598165727724,0.11,7.499999998146E-02)); +#56612 = CARTESIAN_POINT('',(0.598228617059,0.11,7.619999998147E-02)); +#56613 = CARTESIAN_POINT('',(0.598260061727,0.11,7.679999997527E-02)); +#56614 = CARTESIAN_POINT('',(0.598291506394,0.11,7.739999998148E-02)); +#56615 = CARTESIAN_POINT('',(0.59835439573,0.11,7.859999998149E-02)); +#56616 = CARTESIAN_POINT('',(0.598385840397,0.11,7.919999997529E-02)); +#56617 = CARTESIAN_POINT('',(0.598417285065,0.11,7.97999999815E-02)); +#56618 = CARTESIAN_POINT('',(0.5984801744,0.11,8.099999998151E-02)); +#56619 = CARTESIAN_POINT('',(0.598511619067,0.11,8.159999997532E-02)); +#56620 = CARTESIAN_POINT('',(0.598543063735,0.11,8.219999998151E-02)); +#56621 = CARTESIAN_POINT('',(0.59860595307,0.11,8.339999998153E-02)); +#56622 = CARTESIAN_POINT('',(0.598637397737,0.11,8.399999997534E-02)); +#56623 = CARTESIAN_POINT('',(0.598668842405,0.11,8.459999998153E-02)); +#56624 = CARTESIAN_POINT('',(0.59873173174,0.11,8.579999998155E-02)); +#56625 = CARTESIAN_POINT('',(0.598763176408,0.11,8.639999997537E-02)); +#56626 = CARTESIAN_POINT('',(0.598794621076,0.11,8.699999998155E-02)); +#56627 = CARTESIAN_POINT('',(0.598857510411,0.11,8.819999998156E-02)); +#56628 = CARTESIAN_POINT('',(0.598888955078,0.11,8.879999997539E-02)); +#56629 = CARTESIAN_POINT('',(0.598920399746,0.11,8.939999998157E-02)); +#56630 = CARTESIAN_POINT('',(0.598983289081,0.11,9.059999998158E-02)); +#56631 = CARTESIAN_POINT('',(0.599014733748,0.11,9.119999997541E-02)); +#56632 = CARTESIAN_POINT('',(0.599046178416,0.11,9.179999998159E-02)); +#56633 = CARTESIAN_POINT('',(0.599109067751,0.11,9.29999999816E-02)); +#56634 = CARTESIAN_POINT('',(0.599140512418,0.11,9.359999997544E-02)); +#56635 = CARTESIAN_POINT('',(0.599171957086,0.11,9.419999998161E-02)); +#56636 = CARTESIAN_POINT('',(0.599234846422,0.11,9.539999998162E-02)); +#56637 = CARTESIAN_POINT('',(0.599266291089,0.11,9.599999997546E-02)); +#56638 = CARTESIAN_POINT('',(0.599297735757,0.11,9.659999998163E-02)); +#56639 = CARTESIAN_POINT('',(0.599360625092,0.11,9.779999998164E-02)); +#56640 = CARTESIAN_POINT('',(0.599392069759,0.11,9.839999997548E-02)); +#56641 = CARTESIAN_POINT('',(0.599423514427,0.11,9.899999998165E-02)); +#56642 = CARTESIAN_POINT('',(0.599486403762,0.11,0.100199999982)); +#56643 = CARTESIAN_POINT('',(0.599517848429,0.11,0.100799999976)); +#56644 = CARTESIAN_POINT('',(0.599549293097,0.11,0.101399999982)); +#56645 = CARTESIAN_POINT('',(0.599612182432,0.11,0.102599999982)); +#56646 = CARTESIAN_POINT('',(0.5996436271,0.11,0.103199999976)); +#56647 = CARTESIAN_POINT('',(0.599675071767,0.11,0.103799999982)); +#56648 = CARTESIAN_POINT('',(0.599737961103,0.11,0.104999999982)); +#56649 = CARTESIAN_POINT('',(0.59976940577,0.11,0.105599999976)); +#56650 = CARTESIAN_POINT('',(0.599800850438,0.11,0.106199999982)); +#56651 = CARTESIAN_POINT('',(0.599874221328,0.11,0.107599999967)); +#56652 = CARTESIAN_POINT('',(0.599916147551,0.11,0.108399999956)); +#56653 = CARTESIAN_POINT('',(0.599958073775,0.11,0.109199999967)); +#56654 = CARTESIAN_POINT('',(0.6,0.11,0.11)); +#56655 = ORIENTED_EDGE('',*,*,#56408,.T.); +#56656 = ORIENTED_EDGE('',*,*,#56263,.T.); +#56657 = ORIENTED_EDGE('',*,*,#56658,.F.); +#56658 = EDGE_CURVE('',#56551,#56264,#56659,.T.); +#56659 = LINE('',#56660,#56661); +#56660 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56661 = VECTOR('',#56662,1.); +#56662 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#56663 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56664,#56665) + ,(#56666,#56667 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56664 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#56665 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#56666 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56667 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56668 = ADVANCED_FACE('',(#56669),#56791,.T.); +#56669 = FACE_BOUND('',#56670,.T.); +#56670 = EDGE_LOOP('',(#56671,#56678,#56679,#56785)); +#56671 = ORIENTED_EDGE('',*,*,#56672,.F.); +#56672 = EDGE_CURVE('',#56384,#56673,#56675,.T.); +#56673 = VERTEX_POINT('',#56674); +#56674 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56675 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56676,#56677),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56676 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56677 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56678 = ORIENTED_EDGE('',*,*,#56383,.T.); +#56679 = ORIENTED_EDGE('',*,*,#56680,.T.); +#56680 = EDGE_CURVE('',#56386,#56681,#56683,.T.); +#56681 = VERTEX_POINT('',#56682); +#56682 = CARTESIAN_POINT('',(-0.6,0.61,0.11)); +#56683 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56684,#56685,#56686,#56687, + #56688,#56689,#56690,#56691,#56692,#56693,#56694,#56695,#56696, + #56697,#56698,#56699,#56700,#56701,#56702,#56703,#56704,#56705, + #56706,#56707,#56708,#56709,#56710,#56711,#56712,#56713,#56714, + #56715,#56716,#56717,#56718,#56719,#56720,#56721,#56722,#56723, + #56724,#56725,#56726,#56727,#56728,#56729,#56730,#56731,#56732, + #56733,#56734,#56735,#56736,#56737,#56738,#56739,#56740,#56741, + #56742,#56743,#56744,#56745,#56746,#56747,#56748,#56749,#56750, + #56751,#56752,#56753,#56754,#56755,#56756,#56757,#56758,#56759, + #56760,#56761,#56762,#56763,#56764,#56765,#56766,#56767,#56768, + #56769,#56770,#56771,#56772,#56773,#56774,#56775,#56776,#56777, + #56778,#56779,#56780,#56781,#56782,#56783,#56784),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527395E-02,6.000171535364E-02,9.000249028103E-02, + 0.120003210098,0.150003874847,0.180004484568,0.210005039305, + 0.240005539099,0.270005983991,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.42000738639,0.450007502748, + 0.480007564495,0.510007571673,0.540007524324,0.570007422489, + 0.600007266208,0.630007055524,0.660006790478,0.69000647111, + 0.720006097462,0.750005669575,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#56684 = CARTESIAN_POINT('',(-0.595807377657,0.61,3.E-02)); +#56685 = CARTESIAN_POINT('',(-0.595838822296,0.61,3.059999944783E-02)); +#56686 = CARTESIAN_POINT('',(-0.595870266954,0.61,3.119999926388E-02)); +#56687 = CARTESIAN_POINT('',(-0.595901711631,0.61,3.179999944803E-02)); +#56688 = CARTESIAN_POINT('',(-0.595964600966,0.61,3.299999944838E-02)); +#56689 = CARTESIAN_POINT('',(-0.595996045624,0.61,3.359999926458E-02)); +#56690 = CARTESIAN_POINT('',(-0.596027490301,0.61,3.419999944858E-02)); +#56691 = CARTESIAN_POINT('',(-0.596090379637,0.61,3.539999944893E-02)); +#56692 = CARTESIAN_POINT('',(-0.596121824295,0.61,3.599999926526E-02)); +#56693 = CARTESIAN_POINT('',(-0.596153268972,0.61,3.659999944913E-02)); +#56694 = CARTESIAN_POINT('',(-0.596216158307,0.61,3.779999944948E-02)); +#56695 = CARTESIAN_POINT('',(-0.596247602965,0.61,3.839999926595E-02)); +#56696 = CARTESIAN_POINT('',(-0.596279047642,0.61,3.899999944968E-02)); +#56697 = CARTESIAN_POINT('',(-0.596341936977,0.61,4.019999945003E-02)); +#56698 = CARTESIAN_POINT('',(-0.596373381635,0.61,4.079999926664E-02)); +#56699 = CARTESIAN_POINT('',(-0.596404826312,0.61,4.139999945023E-02)); +#56700 = CARTESIAN_POINT('',(-0.596467715648,0.61,4.259999945058E-02)); +#56701 = CARTESIAN_POINT('',(-0.596499160305,0.61,4.319999926733E-02)); +#56702 = CARTESIAN_POINT('',(-0.596530604983,0.61,4.379999945078E-02)); +#56703 = CARTESIAN_POINT('',(-0.596593494318,0.61,4.499999945112E-02)); +#56704 = CARTESIAN_POINT('',(-0.596624938976,0.61,4.559999926801E-02)); +#56705 = CARTESIAN_POINT('',(-0.596656383653,0.61,4.619999945133E-02)); +#56706 = CARTESIAN_POINT('',(-0.596719272988,0.61,4.739999945167E-02)); +#56707 = CARTESIAN_POINT('',(-0.596750717646,0.61,4.79999992687E-02)); +#56708 = CARTESIAN_POINT('',(-0.596782162323,0.61,4.859999945188E-02)); +#56709 = CARTESIAN_POINT('',(-0.596845051658,0.61,4.979999945222E-02)); +#56710 = CARTESIAN_POINT('',(-0.596876496316,0.61,5.039999926939E-02)); +#56711 = CARTESIAN_POINT('',(-0.596907940994,0.61,5.099999945242E-02)); +#56712 = CARTESIAN_POINT('',(-0.596970830329,0.61,5.219999945277E-02)); +#56713 = CARTESIAN_POINT('',(-0.597002274987,0.61,5.279999927007E-02)); +#56714 = CARTESIAN_POINT('',(-0.597033719664,0.61,5.339999945297E-02)); +#56715 = CARTESIAN_POINT('',(-0.597096608999,0.61,5.459999945331E-02)); +#56716 = CARTESIAN_POINT('',(-0.597128053657,0.61,5.519999927076E-02)); +#56717 = CARTESIAN_POINT('',(-0.597159498334,0.61,5.579999945351E-02)); +#56718 = CARTESIAN_POINT('',(-0.597222387669,0.61,5.699999945386E-02)); +#56719 = CARTESIAN_POINT('',(-0.597253832327,0.61,5.759999927144E-02)); +#56720 = CARTESIAN_POINT('',(-0.597285277005,0.61,5.819999945406E-02)); +#56721 = CARTESIAN_POINT('',(-0.59734816634,0.61,5.93999994544E-02)); +#56722 = CARTESIAN_POINT('',(-0.597379610998,0.61,5.999999927213E-02)); +#56723 = CARTESIAN_POINT('',(-0.597411055675,0.61,6.059999945461E-02)); +#56724 = CARTESIAN_POINT('',(-0.59747394501,0.61,6.179999945495E-02)); +#56725 = CARTESIAN_POINT('',(-0.597505389668,0.61,6.239999927281E-02)); +#56726 = CARTESIAN_POINT('',(-0.597536834345,0.61,6.299999945515E-02)); +#56727 = CARTESIAN_POINT('',(-0.59759972368,0.61,6.419999945549E-02)); +#56728 = CARTESIAN_POINT('',(-0.597631168338,0.61,6.479999927349E-02)); +#56729 = CARTESIAN_POINT('',(-0.597662613015,0.61,6.539999945569E-02)); +#56730 = CARTESIAN_POINT('',(-0.597725502351,0.61,6.659999945604E-02)); +#56731 = CARTESIAN_POINT('',(-0.597756947009,0.61,6.719999927417E-02)); +#56732 = CARTESIAN_POINT('',(-0.597788391686,0.61,6.779999945624E-02)); +#56733 = CARTESIAN_POINT('',(-0.597851281021,0.61,6.899999945658E-02)); +#56734 = CARTESIAN_POINT('',(-0.597882725679,0.61,6.959999927485E-02)); +#56735 = CARTESIAN_POINT('',(-0.597914170356,0.61,7.019999945678E-02)); +#56736 = CARTESIAN_POINT('',(-0.597977059691,0.61,7.139999945712E-02)); +#56737 = CARTESIAN_POINT('',(-0.598008504349,0.61,7.199999927553E-02)); +#56738 = CARTESIAN_POINT('',(-0.598039949026,0.61,7.259999945732E-02)); +#56739 = CARTESIAN_POINT('',(-0.598102838362,0.61,7.379999945766E-02)); +#56740 = CARTESIAN_POINT('',(-0.59813428302,0.61,7.439999927621E-02)); +#56741 = CARTESIAN_POINT('',(-0.598165727697,0.61,7.499999945787E-02)); +#56742 = CARTESIAN_POINT('',(-0.598228617032,0.61,7.619999945821E-02)); +#56743 = CARTESIAN_POINT('',(-0.59826006169,0.61,7.679999927689E-02)); +#56744 = CARTESIAN_POINT('',(-0.598291506367,0.61,7.739999945841E-02)); +#56745 = CARTESIAN_POINT('',(-0.598354395702,0.61,7.859999945875E-02)); +#56746 = CARTESIAN_POINT('',(-0.59838584036,0.61,7.919999927757E-02)); +#56747 = CARTESIAN_POINT('',(-0.598417285037,0.61,7.979999945895E-02)); +#56748 = CARTESIAN_POINT('',(-0.598480174372,0.61,8.099999945929E-02)); +#56749 = CARTESIAN_POINT('',(-0.598511619031,0.61,8.159999927825E-02)); +#56750 = CARTESIAN_POINT('',(-0.598543063708,0.61,8.219999945949E-02)); +#56751 = CARTESIAN_POINT('',(-0.598605953043,0.61,8.339999945983E-02)); +#56752 = CARTESIAN_POINT('',(-0.598637397701,0.61,8.399999927893E-02)); +#56753 = CARTESIAN_POINT('',(-0.598668842378,0.61,8.459999946003E-02)); +#56754 = CARTESIAN_POINT('',(-0.598731731713,0.61,8.579999946037E-02)); +#56755 = CARTESIAN_POINT('',(-0.598763176371,0.61,8.63999992796E-02)); +#56756 = CARTESIAN_POINT('',(-0.598794621048,0.61,8.699999946057E-02)); +#56757 = CARTESIAN_POINT('',(-0.598857510383,0.61,8.819999946091E-02)); +#56758 = CARTESIAN_POINT('',(-0.598888955041,0.61,8.879999928028E-02)); +#56759 = CARTESIAN_POINT('',(-0.598920399719,0.61,8.939999946111E-02)); +#56760 = CARTESIAN_POINT('',(-0.598983289054,0.61,9.059999946145E-02)); +#56761 = CARTESIAN_POINT('',(-0.599014733712,0.61,9.119999928096E-02)); +#56762 = CARTESIAN_POINT('',(-0.599046178389,0.61,9.179999946165E-02)); +#56763 = CARTESIAN_POINT('',(-0.599109067724,0.61,9.299999946199E-02)); +#56764 = CARTESIAN_POINT('',(-0.599140512382,0.61,9.359999928163E-02)); +#56765 = CARTESIAN_POINT('',(-0.599171957059,0.61,9.419999946219E-02)); +#56766 = CARTESIAN_POINT('',(-0.599234846394,0.61,9.539999946253E-02)); +#56767 = CARTESIAN_POINT('',(-0.599266291052,0.61,9.599999928231E-02)); +#56768 = CARTESIAN_POINT('',(-0.599297735729,0.61,9.659999946273E-02)); +#56769 = CARTESIAN_POINT('',(-0.599360625065,0.61,9.779999946306E-02)); +#56770 = CARTESIAN_POINT('',(-0.599392069723,0.61,9.839999928298E-02)); +#56771 = CARTESIAN_POINT('',(-0.5994235144,0.61,9.899999946326E-02)); +#56772 = CARTESIAN_POINT('',(-0.599486403735,0.61,0.100199999464)); +#56773 = CARTESIAN_POINT('',(-0.599517848393,0.61,0.100799999284)); +#56774 = CARTESIAN_POINT('',(-0.59954929307,0.61,0.101399999464)); +#56775 = CARTESIAN_POINT('',(-0.599612182405,0.61,0.102599999464)); +#56776 = CARTESIAN_POINT('',(-0.599643627063,0.61,0.103199999284)); +#56777 = CARTESIAN_POINT('',(-0.59967507174,0.61,0.103799999464)); +#56778 = CARTESIAN_POINT('',(-0.599737961076,0.61,0.104999999465)); +#56779 = CARTESIAN_POINT('',(-0.599769405734,0.61,0.105599999285)); +#56780 = CARTESIAN_POINT('',(-0.599800850411,0.61,0.106199999465)); +#56781 = CARTESIAN_POINT('',(-0.59987422128,0.61,0.107599999045)); +#56782 = CARTESIAN_POINT('',(-0.599916147486,0.61,0.108399998725)); +#56783 = CARTESIAN_POINT('',(-0.599958073726,0.61,0.109199999043)); +#56784 = CARTESIAN_POINT('',(-0.6,0.61,0.11)); +#56785 = ORIENTED_EDGE('',*,*,#56786,.F.); +#56786 = EDGE_CURVE('',#56673,#56681,#56787,.T.); +#56787 = LINE('',#56788,#56789); +#56788 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56789 = VECTOR('',#56790,1.); +#56790 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#56791 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56792,#56793) + ,(#56794,#56795 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56792 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56793 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56794 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#56795 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#56796 = ADVANCED_FACE('',(#56797),#56808,.T.); +#56797 = FACE_BOUND('',#56798,.T.); +#56798 = EDGE_LOOP('',(#56799,#56800,#56801,#56807)); +#56799 = ORIENTED_EDGE('',*,*,#56393,.T.); +#56800 = ORIENTED_EDGE('',*,*,#56672,.T.); +#56801 = ORIENTED_EDGE('',*,*,#56802,.F.); +#56802 = EDGE_CURVE('',#56530,#56673,#56803,.T.); +#56803 = LINE('',#56804,#56805); +#56804 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56805 = VECTOR('',#56806,1.); +#56806 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#56807 = ORIENTED_EDGE('',*,*,#56529,.F.); +#56808 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56809,#56810) + ,(#56811,#56812 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56809 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#56810 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#56811 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#56812 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#56813 = ADVANCED_FACE('',(#56814),#56839,.F.); +#56814 = FACE_BOUND('',#56815,.F.); +#56815 = EDGE_LOOP('',(#56816,#56824,#56832,#56838)); +#56816 = ORIENTED_EDGE('',*,*,#56817,.F.); +#56817 = EDGE_CURVE('',#56818,#56386,#56820,.T.); +#56818 = VERTEX_POINT('',#56819); +#56819 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56820 = LINE('',#56821,#56822); +#56821 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56822 = VECTOR('',#56823,1.); +#56823 = DIRECTION('',(0.,0.,1.)); +#56824 = ORIENTED_EDGE('',*,*,#56825,.T.); +#56825 = EDGE_CURVE('',#56818,#56826,#56828,.T.); +#56826 = VERTEX_POINT('',#56827); +#56827 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#56828 = LINE('',#56829,#56830); +#56829 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56830 = VECTOR('',#56831,1.); +#56831 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56832 = ORIENTED_EDGE('',*,*,#56833,.T.); +#56833 = EDGE_CURVE('',#56826,#56489,#56834,.T.); +#56834 = LINE('',#56835,#56836); +#56835 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#56836 = VECTOR('',#56837,1.); +#56837 = DIRECTION('',(0.,0.,1.)); +#56838 = ORIENTED_EDGE('',*,*,#56496,.F.); +#56839 = PLANE('',#56840); +#56840 = AXIS2_PLACEMENT_3D('',#56841,#56842,#56843); +#56841 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#56842 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56843 = DIRECTION('',(0.,0.,1.)); +#56844 = ADVANCED_FACE('',(#56845),#57066,.T.); +#56845 = FACE_BOUND('',#56846,.T.); +#56846 = EDGE_LOOP('',(#56847,#56953,#56954,#57060)); +#56847 = ORIENTED_EDGE('',*,*,#56848,.F.); +#56848 = EDGE_CURVE('',#56489,#56849,#56851,.T.); +#56849 = VERTEX_POINT('',#56850); +#56850 = CARTESIAN_POINT('',(-0.6,0.39,0.11)); +#56851 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56852,#56853,#56854,#56855, + #56856,#56857,#56858,#56859,#56860,#56861,#56862,#56863,#56864, + #56865,#56866,#56867,#56868,#56869,#56870,#56871,#56872,#56873, + #56874,#56875,#56876,#56877,#56878,#56879,#56880,#56881,#56882, + #56883,#56884,#56885,#56886,#56887,#56888,#56889,#56890,#56891, + #56892,#56893,#56894,#56895,#56896,#56897,#56898,#56899,#56900, + #56901,#56902,#56903,#56904,#56905,#56906,#56907,#56908,#56909, + #56910,#56911,#56912,#56913,#56914,#56915,#56916,#56917,#56918, + #56919,#56920,#56921,#56922,#56923,#56924,#56925,#56926,#56927, + #56928,#56929,#56930,#56931,#56932,#56933,#56934,#56935,#56936, + #56937,#56938,#56939,#56940,#56941,#56942,#56943,#56944,#56945, + #56946,#56947,#56948,#56949,#56950,#56951,#56952),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000037299324E-02,6.000072272736E-02,9.000104922047E-02, + 0.120001352491,0.150001632556,0.180001889434,0.210002123143, + 0.240002333702,0.270002521127,0.300002685437,0.33000282665, + 0.360002944785,0.390003039857,0.420003111887,0.450003160891, + 0.480003186887,0.510003189893,0.540003169928,0.570003127008, + 0.600003061152,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.81000195943, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.96000048829,1.),.UNSPECIFIED.); +#56852 = CARTESIAN_POINT('',(-0.595807377657,0.39,3.E-02)); +#56853 = CARTESIAN_POINT('',(-0.595838822313,0.39,3.059999976731E-02)); +#56854 = CARTESIAN_POINT('',(-0.595870266976,0.39,3.119999968979E-02)); +#56855 = CARTESIAN_POINT('',(-0.595901711648,0.39,3.179999976739E-02)); +#56856 = CARTESIAN_POINT('',(-0.595964600983,0.39,3.299999976754E-02)); +#56857 = CARTESIAN_POINT('',(-0.595996045647,0.39,3.359999969008E-02)); +#56858 = CARTESIAN_POINT('',(-0.596027490318,0.39,3.419999976763E-02)); +#56859 = CARTESIAN_POINT('',(-0.596090379653,0.39,3.539999976777E-02)); +#56860 = CARTESIAN_POINT('',(-0.596121824317,0.39,3.599999969038E-02)); +#56861 = CARTESIAN_POINT('',(-0.596153268988,0.39,3.659999976786E-02)); +#56862 = CARTESIAN_POINT('',(-0.596216158324,0.39,3.779999976801E-02)); +#56863 = CARTESIAN_POINT('',(-0.596247602987,0.39,3.839999969067E-02)); +#56864 = CARTESIAN_POINT('',(-0.596279047659,0.39,3.899999976809E-02)); +#56865 = CARTESIAN_POINT('',(-0.596341936994,0.39,4.019999976824E-02)); +#56866 = CARTESIAN_POINT('',(-0.596373381657,0.39,4.079999969097E-02)); +#56867 = CARTESIAN_POINT('',(-0.596404826329,0.39,4.139999976833E-02)); +#56868 = CARTESIAN_POINT('',(-0.596467715664,0.39,4.259999976848E-02)); +#56869 = CARTESIAN_POINT('',(-0.596499160328,0.39,4.319999969126E-02)); +#56870 = CARTESIAN_POINT('',(-0.596530604999,0.39,4.379999976856E-02)); +#56871 = CARTESIAN_POINT('',(-0.596593494334,0.39,4.499999976871E-02)); +#56872 = CARTESIAN_POINT('',(-0.596624938998,0.39,4.559999969155E-02)); +#56873 = CARTESIAN_POINT('',(-0.59665638367,0.39,4.61999997688E-02)); +#56874 = CARTESIAN_POINT('',(-0.596719273005,0.39,4.739999976894E-02)); +#56875 = CARTESIAN_POINT('',(-0.596750717668,0.39,4.799999969185E-02)); +#56876 = CARTESIAN_POINT('',(-0.59678216234,0.39,4.859999976903E-02)); +#56877 = CARTESIAN_POINT('',(-0.596845051675,0.39,4.979999976918E-02)); +#56878 = CARTESIAN_POINT('',(-0.596876496339,0.39,5.039999969214E-02)); +#56879 = CARTESIAN_POINT('',(-0.59690794101,0.39,5.099999976926E-02)); +#56880 = CARTESIAN_POINT('',(-0.596970830345,0.39,5.219999976941E-02)); +#56881 = CARTESIAN_POINT('',(-0.597002275009,0.39,5.279999969243E-02)); +#56882 = CARTESIAN_POINT('',(-0.59703371968,0.39,5.339999976949E-02)); +#56883 = CARTESIAN_POINT('',(-0.597096609016,0.39,5.459999976964E-02)); +#56884 = CARTESIAN_POINT('',(-0.597128053679,0.39,5.519999969272E-02)); +#56885 = CARTESIAN_POINT('',(-0.597159498351,0.39,5.579999976973E-02)); +#56886 = CARTESIAN_POINT('',(-0.597222387686,0.39,5.699999976987E-02)); +#56887 = CARTESIAN_POINT('',(-0.597253832349,0.39,5.759999969302E-02)); +#56888 = CARTESIAN_POINT('',(-0.597285277021,0.39,5.819999976996E-02)); +#56889 = CARTESIAN_POINT('',(-0.597348166356,0.39,5.939999977011E-02)); +#56890 = CARTESIAN_POINT('',(-0.59737961102,0.39,5.999999969331E-02)); +#56891 = CARTESIAN_POINT('',(-0.597411055691,0.39,6.059999977019E-02)); +#56892 = CARTESIAN_POINT('',(-0.597473945027,0.39,6.179999977034E-02)); +#56893 = CARTESIAN_POINT('',(-0.59750538969,0.39,6.23999996936E-02)); +#56894 = CARTESIAN_POINT('',(-0.597536834362,0.39,6.299999977042E-02)); +#56895 = CARTESIAN_POINT('',(-0.597599723697,0.39,6.419999977057E-02)); +#56896 = CARTESIAN_POINT('',(-0.59763116836,0.39,6.479999969389E-02)); +#56897 = CARTESIAN_POINT('',(-0.597662613032,0.39,6.539999977066E-02)); +#56898 = CARTESIAN_POINT('',(-0.597725502367,0.39,6.65999997708E-02)); +#56899 = CARTESIAN_POINT('',(-0.597756947031,0.39,6.719999969418E-02)); +#56900 = CARTESIAN_POINT('',(-0.597788391702,0.39,6.779999977089E-02)); +#56901 = CARTESIAN_POINT('',(-0.597851281037,0.39,6.899999977103E-02)); +#56902 = CARTESIAN_POINT('',(-0.597882725701,0.39,6.959999969447E-02)); +#56903 = CARTESIAN_POINT('',(-0.597914170373,0.39,7.019999977112E-02)); +#56904 = CARTESIAN_POINT('',(-0.597977059708,0.39,7.139999977126E-02)); +#56905 = CARTESIAN_POINT('',(-0.598008504371,0.39,7.199999969476E-02)); +#56906 = CARTESIAN_POINT('',(-0.598039949043,0.39,7.259999977135E-02)); +#56907 = CARTESIAN_POINT('',(-0.598102838378,0.39,7.379999977149E-02)); +#56908 = CARTESIAN_POINT('',(-0.598134283042,0.39,7.439999969505E-02)); +#56909 = CARTESIAN_POINT('',(-0.598165727713,0.39,7.499999977158E-02)); +#56910 = CARTESIAN_POINT('',(-0.598228617048,0.39,7.619999977173E-02)); +#56911 = CARTESIAN_POINT('',(-0.598260061712,0.39,7.679999969534E-02)); +#56912 = CARTESIAN_POINT('',(-0.598291506383,0.39,7.739999977181E-02)); +#56913 = CARTESIAN_POINT('',(-0.598354395719,0.39,7.859999977196E-02)); +#56914 = CARTESIAN_POINT('',(-0.598385840382,0.39,7.919999969563E-02)); +#56915 = CARTESIAN_POINT('',(-0.598417285054,0.39,7.979999977204E-02)); +#56916 = CARTESIAN_POINT('',(-0.598480174389,0.39,8.099999977219E-02)); +#56917 = CARTESIAN_POINT('',(-0.598511619052,0.39,8.159999969592E-02)); +#56918 = CARTESIAN_POINT('',(-0.598543063724,0.39,8.219999977227E-02)); +#56919 = CARTESIAN_POINT('',(-0.598605953059,0.39,8.339999977242E-02)); +#56920 = CARTESIAN_POINT('',(-0.598637397723,0.39,8.399999969621E-02)); +#56921 = CARTESIAN_POINT('',(-0.598668842394,0.39,8.45999997725E-02)); +#56922 = CARTESIAN_POINT('',(-0.598731731729,0.39,8.579999977265E-02)); +#56923 = CARTESIAN_POINT('',(-0.598763176393,0.39,8.63999996965E-02)); +#56924 = CARTESIAN_POINT('',(-0.598794621065,0.39,8.699999977273E-02)); +#56925 = CARTESIAN_POINT('',(-0.5988575104,0.39,8.819999977288E-02)); +#56926 = CARTESIAN_POINT('',(-0.598888955063,0.39,8.879999969679E-02)); +#56927 = CARTESIAN_POINT('',(-0.598920399735,0.39,8.939999977296E-02)); +#56928 = CARTESIAN_POINT('',(-0.59898328907,0.39,9.059999977311E-02)); +#56929 = CARTESIAN_POINT('',(-0.599014733734,0.39,9.119999969708E-02)); +#56930 = CARTESIAN_POINT('',(-0.599046178405,0.39,9.179999977319E-02)); +#56931 = CARTESIAN_POINT('',(-0.59910906774,0.39,9.299999977334E-02)); +#56932 = CARTESIAN_POINT('',(-0.599140512404,0.39,9.359999969737E-02)); +#56933 = CARTESIAN_POINT('',(-0.599171957075,0.39,9.419999977342E-02)); +#56934 = CARTESIAN_POINT('',(-0.599234846411,0.39,9.539999977356E-02)); +#56935 = CARTESIAN_POINT('',(-0.599266291074,0.39,9.599999969765E-02)); +#56936 = CARTESIAN_POINT('',(-0.599297735746,0.39,9.659999977365E-02)); +#56937 = CARTESIAN_POINT('',(-0.599360625081,0.39,9.779999977379E-02)); +#56938 = CARTESIAN_POINT('',(-0.599392069744,0.39,9.839999969794E-02)); +#56939 = CARTESIAN_POINT('',(-0.599423514416,0.39,9.899999977388E-02)); +#56940 = CARTESIAN_POINT('',(-0.599486403751,0.39,0.100199999774)); +#56941 = CARTESIAN_POINT('',(-0.599517848415,0.39,0.100799999698)); +#56942 = CARTESIAN_POINT('',(-0.599549293086,0.39,0.101399999774)); +#56943 = CARTESIAN_POINT('',(-0.599612182421,0.39,0.102599999774)); +#56944 = CARTESIAN_POINT('',(-0.599643627085,0.39,0.103199999699)); +#56945 = CARTESIAN_POINT('',(-0.599675071757,0.39,0.103799999774)); +#56946 = CARTESIAN_POINT('',(-0.599737961092,0.39,0.104999999774)); +#56947 = CARTESIAN_POINT('',(-0.599769405755,0.39,0.105599999699)); +#56948 = CARTESIAN_POINT('',(-0.599800850427,0.39,0.106199999775)); +#56949 = CARTESIAN_POINT('',(-0.599874221309,0.39,0.107599999598)); +#56950 = CARTESIAN_POINT('',(-0.599916147525,0.39,0.108399999463)); +#56951 = CARTESIAN_POINT('',(-0.599958073755,0.39,0.109199999597)); +#56952 = CARTESIAN_POINT('',(-0.6,0.39,0.11)); +#56953 = ORIENTED_EDGE('',*,*,#56488,.T.); +#56954 = ORIENTED_EDGE('',*,*,#56955,.T.); +#56955 = EDGE_CURVE('',#56481,#56956,#56958,.T.); +#56956 = VERTEX_POINT('',#56957); +#56957 = CARTESIAN_POINT('',(-0.6,0.11,0.11)); +#56958 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#56959,#56960,#56961,#56962, + #56963,#56964,#56965,#56966,#56967,#56968,#56969,#56970,#56971, + #56972,#56973,#56974,#56975,#56976,#56977,#56978,#56979,#56980, + #56981,#56982,#56983,#56984,#56985,#56986,#56987,#56988,#56989, + #56990,#56991,#56992,#56993,#56994,#56995,#56996,#56997,#56998, + #56999,#57000,#57001,#57002,#57003,#57004,#57005,#57006,#57007, + #57008,#57009,#57010,#57011,#57012,#57013,#57014,#57015,#57016, + #57017,#57018,#57019,#57020,#57021,#57022,#57023,#57024,#57025, + #57026,#57027,#57028,#57029,#57030,#57031,#57032,#57033,#57034, + #57035,#57036,#57037,#57038,#57039,#57040,#57041,#57042,#57043, + #57044,#57045,#57046,#57047,#57048,#57049,#57050,#57051,#57052, + #57053,#57054,#57055,#57056,#57057,#57058,#57059),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027795E-02,6.000005866758E-02,9.00000851704E-02, + 0.120000109788,0.150000132522,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256573, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248472,0.630000241265,0.6600002322,0.690000221277, + 0.720000208498,0.750000193865,0.780000177379,0.810000159041, + 0.840000138854,0.870000116818,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#56959 = CARTESIAN_POINT('',(-0.595807377657,0.11,3.E-02)); +#56960 = CARTESIAN_POINT('',(-0.595838822324,0.11,3.059999998111E-02)); +#56961 = CARTESIAN_POINT('',(-0.595870266991,0.11,3.119999997481E-02)); +#56962 = CARTESIAN_POINT('',(-0.595901711659,0.11,3.179999998111E-02)); +#56963 = CARTESIAN_POINT('',(-0.595964600994,0.11,3.299999998113E-02)); +#56964 = CARTESIAN_POINT('',(-0.595996045661,0.11,3.359999997484E-02)); +#56965 = CARTESIAN_POINT('',(-0.596027490329,0.11,3.419999998113E-02)); +#56966 = CARTESIAN_POINT('',(-0.596090379664,0.11,3.539999998115E-02)); +#56967 = CARTESIAN_POINT('',(-0.596121824332,0.11,3.599999997486E-02)); +#56968 = CARTESIAN_POINT('',(-0.596153269,0.11,3.659999998115E-02)); +#56969 = CARTESIAN_POINT('',(-0.596216158335,0.11,3.779999998117E-02)); +#56970 = CARTESIAN_POINT('',(-0.596247603002,0.11,3.839999997489E-02)); +#56971 = CARTESIAN_POINT('',(-0.59627904767,0.11,3.899999998117E-02)); +#56972 = CARTESIAN_POINT('',(-0.596341937005,0.11,4.019999998118E-02)); +#56973 = CARTESIAN_POINT('',(-0.596373381672,0.11,4.079999997491E-02)); +#56974 = CARTESIAN_POINT('',(-0.59640482634,0.11,4.139999998119E-02)); +#56975 = CARTESIAN_POINT('',(-0.596467715675,0.11,4.25999999812E-02)); +#56976 = CARTESIAN_POINT('',(-0.596499160343,0.11,4.319999997494E-02)); +#56977 = CARTESIAN_POINT('',(-0.59653060501,0.11,4.379999998121E-02)); +#56978 = CARTESIAN_POINT('',(-0.596593494346,0.11,4.499999998122E-02)); +#56979 = CARTESIAN_POINT('',(-0.596624939013,0.11,4.559999997496E-02)); +#56980 = CARTESIAN_POINT('',(-0.596656383681,0.11,4.619999998123E-02)); +#56981 = CARTESIAN_POINT('',(-0.596719273016,0.11,4.739999998124E-02)); +#56982 = CARTESIAN_POINT('',(-0.596750717683,0.11,4.799999997498E-02)); +#56983 = CARTESIAN_POINT('',(-0.596782162351,0.11,4.859999998125E-02)); +#56984 = CARTESIAN_POINT('',(-0.596845051686,0.11,4.979999998126E-02)); +#56985 = CARTESIAN_POINT('',(-0.596876496353,0.11,5.039999997501E-02)); +#56986 = CARTESIAN_POINT('',(-0.596907941021,0.11,5.099999998127E-02)); +#56987 = CARTESIAN_POINT('',(-0.596970830356,0.11,5.219999998128E-02)); +#56988 = CARTESIAN_POINT('',(-0.597002275024,0.11,5.279999997503E-02)); +#56989 = CARTESIAN_POINT('',(-0.597033719692,0.11,5.339999998129E-02)); +#56990 = CARTESIAN_POINT('',(-0.597096609027,0.11,5.45999999813E-02)); +#56991 = CARTESIAN_POINT('',(-0.597128053694,0.11,5.519999997506E-02)); +#56992 = CARTESIAN_POINT('',(-0.597159498362,0.11,5.579999998131E-02)); +#56993 = CARTESIAN_POINT('',(-0.597222387697,0.11,5.699999998132E-02)); +#56994 = CARTESIAN_POINT('',(-0.597253832364,0.11,5.759999997508E-02)); +#56995 = CARTESIAN_POINT('',(-0.597285277032,0.11,5.819999998133E-02)); +#56996 = CARTESIAN_POINT('',(-0.597348166367,0.11,5.939999998134E-02)); +#56997 = CARTESIAN_POINT('',(-0.597379611035,0.11,5.99999999751E-02)); +#56998 = CARTESIAN_POINT('',(-0.597411055702,0.11,6.059999998134E-02)); +#56999 = CARTESIAN_POINT('',(-0.597473945038,0.11,6.179999998136E-02)); +#57000 = CARTESIAN_POINT('',(-0.597505389705,0.11,6.239999997513E-02)); +#57001 = CARTESIAN_POINT('',(-0.597536834373,0.11,6.299999998136E-02)); +#57002 = CARTESIAN_POINT('',(-0.597599723708,0.11,6.419999998138E-02)); +#57003 = CARTESIAN_POINT('',(-0.597631168375,0.11,6.479999997515E-02)); +#57004 = CARTESIAN_POINT('',(-0.597662613043,0.11,6.539999998138E-02)); +#57005 = CARTESIAN_POINT('',(-0.597725502378,0.11,6.659999998139E-02)); +#57006 = CARTESIAN_POINT('',(-0.597756947045,0.11,6.719999997518E-02)); +#57007 = CARTESIAN_POINT('',(-0.597788391713,0.11,6.77999999814E-02)); +#57008 = CARTESIAN_POINT('',(-0.597851281048,0.11,6.899999998141E-02)); +#57009 = CARTESIAN_POINT('',(-0.597882725716,0.11,6.95999999752E-02)); +#57010 = CARTESIAN_POINT('',(-0.597914170384,0.11,7.019999998142E-02)); +#57011 = CARTESIAN_POINT('',(-0.597977059719,0.11,7.139999998143E-02)); +#57012 = CARTESIAN_POINT('',(-0.598008504386,0.11,7.199999997522E-02)); +#57013 = CARTESIAN_POINT('',(-0.598039949054,0.11,7.259999998144E-02)); +#57014 = CARTESIAN_POINT('',(-0.598102838389,0.11,7.379999998145E-02)); +#57015 = CARTESIAN_POINT('',(-0.598134283056,0.11,7.439999997525E-02)); +#57016 = CARTESIAN_POINT('',(-0.598165727724,0.11,7.499999998146E-02)); +#57017 = CARTESIAN_POINT('',(-0.598228617059,0.11,7.619999998147E-02)); +#57018 = CARTESIAN_POINT('',(-0.598260061727,0.11,7.679999997527E-02)); +#57019 = CARTESIAN_POINT('',(-0.598291506394,0.11,7.739999998148E-02)); +#57020 = CARTESIAN_POINT('',(-0.59835439573,0.11,7.859999998149E-02)); +#57021 = CARTESIAN_POINT('',(-0.598385840397,0.11,7.919999997529E-02)); +#57022 = CARTESIAN_POINT('',(-0.598417285065,0.11,7.97999999815E-02)); +#57023 = CARTESIAN_POINT('',(-0.5984801744,0.11,8.099999998151E-02)); +#57024 = CARTESIAN_POINT('',(-0.598511619067,0.11,8.159999997532E-02)); +#57025 = CARTESIAN_POINT('',(-0.598543063735,0.11,8.219999998151E-02)); +#57026 = CARTESIAN_POINT('',(-0.59860595307,0.11,8.339999998153E-02)); +#57027 = CARTESIAN_POINT('',(-0.598637397737,0.11,8.399999997534E-02)); +#57028 = CARTESIAN_POINT('',(-0.598668842405,0.11,8.459999998153E-02)); +#57029 = CARTESIAN_POINT('',(-0.59873173174,0.11,8.579999998155E-02)); +#57030 = CARTESIAN_POINT('',(-0.598763176408,0.11,8.639999997537E-02)); +#57031 = CARTESIAN_POINT('',(-0.598794621076,0.11,8.699999998155E-02)); +#57032 = CARTESIAN_POINT('',(-0.598857510411,0.11,8.819999998156E-02)); +#57033 = CARTESIAN_POINT('',(-0.598888955078,0.11,8.879999997539E-02)); +#57034 = CARTESIAN_POINT('',(-0.598920399746,0.11,8.939999998157E-02)); +#57035 = CARTESIAN_POINT('',(-0.598983289081,0.11,9.059999998158E-02)); +#57036 = CARTESIAN_POINT('',(-0.599014733748,0.11,9.119999997541E-02)); +#57037 = CARTESIAN_POINT('',(-0.599046178416,0.11,9.179999998159E-02)); +#57038 = CARTESIAN_POINT('',(-0.599109067751,0.11,9.29999999816E-02)); +#57039 = CARTESIAN_POINT('',(-0.599140512418,0.11,9.359999997544E-02)); +#57040 = CARTESIAN_POINT('',(-0.599171957086,0.11,9.419999998161E-02)); +#57041 = CARTESIAN_POINT('',(-0.599234846422,0.11,9.539999998162E-02)); +#57042 = CARTESIAN_POINT('',(-0.599266291089,0.11,9.599999997546E-02)); +#57043 = CARTESIAN_POINT('',(-0.599297735757,0.11,9.659999998163E-02)); +#57044 = CARTESIAN_POINT('',(-0.599360625092,0.11,9.779999998164E-02)); +#57045 = CARTESIAN_POINT('',(-0.599392069759,0.11,9.839999997548E-02)); +#57046 = CARTESIAN_POINT('',(-0.599423514427,0.11,9.899999998165E-02)); +#57047 = CARTESIAN_POINT('',(-0.599486403762,0.11,0.100199999982)); +#57048 = CARTESIAN_POINT('',(-0.599517848429,0.11,0.100799999976)); +#57049 = CARTESIAN_POINT('',(-0.599549293097,0.11,0.101399999982)); +#57050 = CARTESIAN_POINT('',(-0.599612182432,0.11,0.102599999982)); +#57051 = CARTESIAN_POINT('',(-0.5996436271,0.11,0.103199999976)); +#57052 = CARTESIAN_POINT('',(-0.599675071767,0.11,0.103799999982)); +#57053 = CARTESIAN_POINT('',(-0.599737961103,0.11,0.104999999982)); +#57054 = CARTESIAN_POINT('',(-0.59976940577,0.11,0.105599999976)); +#57055 = CARTESIAN_POINT('',(-0.599800850438,0.11,0.106199999982)); +#57056 = CARTESIAN_POINT('',(-0.599874221328,0.11,0.107599999967)); +#57057 = CARTESIAN_POINT('',(-0.599916147551,0.11,0.108399999956)); +#57058 = CARTESIAN_POINT('',(-0.599958073775,0.11,0.109199999967)); +#57059 = CARTESIAN_POINT('',(-0.6,0.11,0.11)); +#57060 = ORIENTED_EDGE('',*,*,#57061,.F.); +#57061 = EDGE_CURVE('',#56849,#56956,#57062,.T.); +#57062 = LINE('',#57063,#57064); +#57063 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57064 = VECTOR('',#57065,1.); +#57065 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#57066 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57067,#57068) + ,(#57069,#57070 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57067 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#57068 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57069 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57070 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57071 = ADVANCED_FACE('',(#57072),#57097,.F.); +#57072 = FACE_BOUND('',#57073,.F.); +#57073 = EDGE_LOOP('',(#57074,#57082,#57090,#57096)); +#57074 = ORIENTED_EDGE('',*,*,#57075,.F.); +#57075 = EDGE_CURVE('',#57076,#56481,#57078,.T.); +#57076 = VERTEX_POINT('',#57077); +#57077 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57078 = LINE('',#57079,#57080); +#57079 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57080 = VECTOR('',#57081,1.); +#57081 = DIRECTION('',(0.,0.,1.)); +#57082 = ORIENTED_EDGE('',*,*,#57083,.T.); +#57083 = EDGE_CURVE('',#57076,#57084,#57086,.T.); +#57084 = VERTEX_POINT('',#57085); +#57085 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#57086 = LINE('',#57087,#57088); +#57087 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57088 = VECTOR('',#57089,1.); +#57089 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57090 = ORIENTED_EDGE('',*,*,#57091,.T.); +#57091 = EDGE_CURVE('',#57084,#56473,#57092,.T.); +#57092 = LINE('',#57093,#57094); +#57093 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#57094 = VECTOR('',#57095,1.); +#57095 = DIRECTION('',(0.,0.,1.)); +#57096 = ORIENTED_EDGE('',*,*,#56480,.F.); +#57097 = PLANE('',#57098); +#57098 = AXIS2_PLACEMENT_3D('',#57099,#57100,#57101); +#57099 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#57100 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57101 = DIRECTION('',(0.,0.,1.)); +#57102 = ADVANCED_FACE('',(#57103),#57324,.T.); +#57103 = FACE_BOUND('',#57104,.T.); +#57104 = EDGE_LOOP('',(#57105,#57211,#57212,#57318)); +#57105 = ORIENTED_EDGE('',*,*,#57106,.F.); +#57106 = EDGE_CURVE('',#56473,#57107,#57109,.T.); +#57107 = VERTEX_POINT('',#57108); +#57108 = CARTESIAN_POINT('',(-0.6,-0.11,0.11)); +#57109 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57110,#57111,#57112,#57113, + #57114,#57115,#57116,#57117,#57118,#57119,#57120,#57121,#57122, + #57123,#57124,#57125,#57126,#57127,#57128,#57129,#57130,#57131, + #57132,#57133,#57134,#57135,#57136,#57137,#57138,#57139,#57140, + #57141,#57142,#57143,#57144,#57145,#57146,#57147,#57148,#57149, + #57150,#57151,#57152,#57153,#57154,#57155,#57156,#57157,#57158, + #57159,#57160,#57161,#57162,#57163,#57164,#57165,#57166,#57167, + #57168,#57169,#57170,#57171,#57172,#57173,#57174,#57175,#57176, + #57177,#57178,#57179,#57180,#57181,#57182,#57183,#57184,#57185, + #57186,#57187,#57188,#57189,#57190,#57191,#57192,#57193,#57194, + #57195,#57196,#57197,#57198,#57199,#57200,#57201,#57202,#57203, + #57204,#57205,#57206,#57207,#57208,#57209,#57210),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027796E-02,6.00000586676E-02,9.000008517042E-02, + 0.120000109788,0.150000132522,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256573, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248472,0.630000241265,0.6600002322,0.690000221277, + 0.720000208498,0.750000193865,0.780000177379,0.810000159041, + 0.840000138854,0.870000116818,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#57110 = CARTESIAN_POINT('',(-0.595807377657,-0.11,3.E-02)); +#57111 = CARTESIAN_POINT('',(-0.595838822324,-0.11,3.059999998111E-02)); +#57112 = CARTESIAN_POINT('',(-0.595870266991,-0.11,3.119999997481E-02)); +#57113 = CARTESIAN_POINT('',(-0.595901711659,-0.11,3.179999998111E-02)); +#57114 = CARTESIAN_POINT('',(-0.595964600994,-0.11,3.299999998113E-02)); +#57115 = CARTESIAN_POINT('',(-0.595996045661,-0.11,3.359999997484E-02)); +#57116 = CARTESIAN_POINT('',(-0.596027490329,-0.11,3.419999998113E-02)); +#57117 = CARTESIAN_POINT('',(-0.596090379664,-0.11,3.539999998115E-02)); +#57118 = CARTESIAN_POINT('',(-0.596121824332,-0.11,3.599999997486E-02)); +#57119 = CARTESIAN_POINT('',(-0.596153269,-0.11,3.659999998115E-02)); +#57120 = CARTESIAN_POINT('',(-0.596216158335,-0.11,3.779999998117E-02)); +#57121 = CARTESIAN_POINT('',(-0.596247603002,-0.11,3.839999997489E-02)); +#57122 = CARTESIAN_POINT('',(-0.59627904767,-0.11,3.899999998117E-02)); +#57123 = CARTESIAN_POINT('',(-0.596341937005,-0.11,4.019999998118E-02)); +#57124 = CARTESIAN_POINT('',(-0.596373381672,-0.11,4.079999997491E-02)); +#57125 = CARTESIAN_POINT('',(-0.59640482634,-0.11,4.139999998119E-02)); +#57126 = CARTESIAN_POINT('',(-0.596467715675,-0.11,4.25999999812E-02)); +#57127 = CARTESIAN_POINT('',(-0.596499160343,-0.11,4.319999997494E-02)); +#57128 = CARTESIAN_POINT('',(-0.59653060501,-0.11,4.379999998121E-02)); +#57129 = CARTESIAN_POINT('',(-0.596593494346,-0.11,4.499999998122E-02)); +#57130 = CARTESIAN_POINT('',(-0.596624939013,-0.11,4.559999997496E-02)); +#57131 = CARTESIAN_POINT('',(-0.596656383681,-0.11,4.619999998123E-02)); +#57132 = CARTESIAN_POINT('',(-0.596719273016,-0.11,4.739999998124E-02)); +#57133 = CARTESIAN_POINT('',(-0.596750717683,-0.11,4.799999997498E-02)); +#57134 = CARTESIAN_POINT('',(-0.596782162351,-0.11,4.859999998125E-02)); +#57135 = CARTESIAN_POINT('',(-0.596845051686,-0.11,4.979999998126E-02)); +#57136 = CARTESIAN_POINT('',(-0.596876496353,-0.11,5.039999997501E-02)); +#57137 = CARTESIAN_POINT('',(-0.596907941021,-0.11,5.099999998127E-02)); +#57138 = CARTESIAN_POINT('',(-0.596970830356,-0.11,5.219999998128E-02)); +#57139 = CARTESIAN_POINT('',(-0.597002275024,-0.11,5.279999997503E-02)); +#57140 = CARTESIAN_POINT('',(-0.597033719692,-0.11,5.339999998129E-02)); +#57141 = CARTESIAN_POINT('',(-0.597096609027,-0.11,5.45999999813E-02)); +#57142 = CARTESIAN_POINT('',(-0.597128053694,-0.11,5.519999997506E-02)); +#57143 = CARTESIAN_POINT('',(-0.597159498362,-0.11,5.579999998131E-02)); +#57144 = CARTESIAN_POINT('',(-0.597222387697,-0.11,5.699999998132E-02)); +#57145 = CARTESIAN_POINT('',(-0.597253832364,-0.11,5.759999997508E-02)); +#57146 = CARTESIAN_POINT('',(-0.597285277032,-0.11,5.819999998133E-02)); +#57147 = CARTESIAN_POINT('',(-0.597348166367,-0.11,5.939999998134E-02)); +#57148 = CARTESIAN_POINT('',(-0.597379611035,-0.11,5.99999999751E-02)); +#57149 = CARTESIAN_POINT('',(-0.597411055702,-0.11,6.059999998134E-02)); +#57150 = CARTESIAN_POINT('',(-0.597473945038,-0.11,6.179999998136E-02)); +#57151 = CARTESIAN_POINT('',(-0.597505389705,-0.11,6.239999997513E-02)); +#57152 = CARTESIAN_POINT('',(-0.597536834373,-0.11,6.299999998136E-02)); +#57153 = CARTESIAN_POINT('',(-0.597599723708,-0.11,6.419999998138E-02)); +#57154 = CARTESIAN_POINT('',(-0.597631168375,-0.11,6.479999997515E-02)); +#57155 = CARTESIAN_POINT('',(-0.597662613043,-0.11,6.539999998138E-02)); +#57156 = CARTESIAN_POINT('',(-0.597725502378,-0.11,6.659999998139E-02)); +#57157 = CARTESIAN_POINT('',(-0.597756947045,-0.11,6.719999997518E-02)); +#57158 = CARTESIAN_POINT('',(-0.597788391713,-0.11,6.77999999814E-02)); +#57159 = CARTESIAN_POINT('',(-0.597851281048,-0.11,6.899999998141E-02)); +#57160 = CARTESIAN_POINT('',(-0.597882725716,-0.11,6.95999999752E-02)); +#57161 = CARTESIAN_POINT('',(-0.597914170384,-0.11,7.019999998142E-02)); +#57162 = CARTESIAN_POINT('',(-0.597977059719,-0.11,7.139999998143E-02)); +#57163 = CARTESIAN_POINT('',(-0.598008504386,-0.11,7.199999997522E-02)); +#57164 = CARTESIAN_POINT('',(-0.598039949054,-0.11,7.259999998144E-02)); +#57165 = CARTESIAN_POINT('',(-0.598102838389,-0.11,7.379999998145E-02)); +#57166 = CARTESIAN_POINT('',(-0.598134283056,-0.11,7.439999997525E-02)); +#57167 = CARTESIAN_POINT('',(-0.598165727724,-0.11,7.499999998146E-02)); +#57168 = CARTESIAN_POINT('',(-0.598228617059,-0.11,7.619999998147E-02)); +#57169 = CARTESIAN_POINT('',(-0.598260061727,-0.11,7.679999997527E-02)); +#57170 = CARTESIAN_POINT('',(-0.598291506394,-0.11,7.739999998148E-02)); +#57171 = CARTESIAN_POINT('',(-0.59835439573,-0.11,7.859999998149E-02)); +#57172 = CARTESIAN_POINT('',(-0.598385840397,-0.11,7.919999997529E-02)); +#57173 = CARTESIAN_POINT('',(-0.598417285065,-0.11,7.97999999815E-02)); +#57174 = CARTESIAN_POINT('',(-0.5984801744,-0.11,8.099999998151E-02)); +#57175 = CARTESIAN_POINT('',(-0.598511619067,-0.11,8.159999997532E-02)); +#57176 = CARTESIAN_POINT('',(-0.598543063735,-0.11,8.219999998152E-02)); +#57177 = CARTESIAN_POINT('',(-0.59860595307,-0.11,8.339999998153E-02)); +#57178 = CARTESIAN_POINT('',(-0.598637397737,-0.11,8.399999997534E-02)); +#57179 = CARTESIAN_POINT('',(-0.598668842405,-0.11,8.459999998153E-02)); +#57180 = CARTESIAN_POINT('',(-0.59873173174,-0.11,8.579999998155E-02)); +#57181 = CARTESIAN_POINT('',(-0.598763176408,-0.11,8.639999997537E-02)); +#57182 = CARTESIAN_POINT('',(-0.598794621076,-0.11,8.699999998155E-02)); +#57183 = CARTESIAN_POINT('',(-0.598857510411,-0.11,8.819999998156E-02)); +#57184 = CARTESIAN_POINT('',(-0.598888955078,-0.11,8.879999997539E-02)); +#57185 = CARTESIAN_POINT('',(-0.598920399746,-0.11,8.939999998157E-02)); +#57186 = CARTESIAN_POINT('',(-0.598983289081,-0.11,9.059999998158E-02)); +#57187 = CARTESIAN_POINT('',(-0.599014733748,-0.11,9.119999997541E-02)); +#57188 = CARTESIAN_POINT('',(-0.599046178416,-0.11,9.179999998159E-02)); +#57189 = CARTESIAN_POINT('',(-0.599109067751,-0.11,9.29999999816E-02)); +#57190 = CARTESIAN_POINT('',(-0.599140512418,-0.11,9.359999997544E-02)); +#57191 = CARTESIAN_POINT('',(-0.599171957086,-0.11,9.419999998161E-02)); +#57192 = CARTESIAN_POINT('',(-0.599234846422,-0.11,9.539999998162E-02)); +#57193 = CARTESIAN_POINT('',(-0.599266291089,-0.11,9.599999997546E-02)); +#57194 = CARTESIAN_POINT('',(-0.599297735757,-0.11,9.659999998163E-02)); +#57195 = CARTESIAN_POINT('',(-0.599360625092,-0.11,9.779999998164E-02)); +#57196 = CARTESIAN_POINT('',(-0.599392069759,-0.11,9.839999997548E-02)); +#57197 = CARTESIAN_POINT('',(-0.599423514427,-0.11,9.899999998165E-02)); +#57198 = CARTESIAN_POINT('',(-0.599486403762,-0.11,0.100199999982)); +#57199 = CARTESIAN_POINT('',(-0.599517848429,-0.11,0.100799999976)); +#57200 = CARTESIAN_POINT('',(-0.599549293097,-0.11,0.101399999982)); +#57201 = CARTESIAN_POINT('',(-0.599612182432,-0.11,0.102599999982)); +#57202 = CARTESIAN_POINT('',(-0.5996436271,-0.11,0.103199999976)); +#57203 = CARTESIAN_POINT('',(-0.599675071767,-0.11,0.103799999982)); +#57204 = CARTESIAN_POINT('',(-0.599737961103,-0.11,0.104999999982)); +#57205 = CARTESIAN_POINT('',(-0.59976940577,-0.11,0.105599999976)); +#57206 = CARTESIAN_POINT('',(-0.599800850438,-0.11,0.106199999982)); +#57207 = CARTESIAN_POINT('',(-0.599874221328,-0.11,0.107599999967)); +#57208 = CARTESIAN_POINT('',(-0.599916147551,-0.11,0.108399999956)); +#57209 = CARTESIAN_POINT('',(-0.599958073775,-0.11,0.109199999967)); +#57210 = CARTESIAN_POINT('',(-0.6,-0.11,0.11)); +#57211 = ORIENTED_EDGE('',*,*,#56472,.T.); +#57212 = ORIENTED_EDGE('',*,*,#57213,.T.); +#57213 = EDGE_CURVE('',#56465,#57214,#57216,.T.); +#57214 = VERTEX_POINT('',#57215); +#57215 = CARTESIAN_POINT('',(-0.6,-0.39,0.11)); +#57216 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57217,#57218,#57219,#57220, + #57221,#57222,#57223,#57224,#57225,#57226,#57227,#57228,#57229, + #57230,#57231,#57232,#57233,#57234,#57235,#57236,#57237,#57238, + #57239,#57240,#57241,#57242,#57243,#57244,#57245,#57246,#57247, + #57248,#57249,#57250,#57251,#57252,#57253,#57254,#57255,#57256, + #57257,#57258,#57259,#57260,#57261,#57262,#57263,#57264,#57265, + #57266,#57267,#57268,#57269,#57270,#57271,#57272,#57273,#57274, + #57275,#57276,#57277,#57278,#57279,#57280,#57281,#57282,#57283, + #57284,#57285,#57286,#57287,#57288,#57289,#57290,#57291,#57292, + #57293,#57294,#57295,#57296,#57297,#57298,#57299,#57300,#57301, + #57302,#57303,#57304,#57305,#57306,#57307,#57308,#57309,#57310, + #57311,#57312,#57313,#57314,#57315,#57316,#57317),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000037299323E-02,6.000072272734E-02,9.000104922043E-02, + 0.120001352491,0.150001632556,0.180001889434,0.210002123143, + 0.240002333701,0.270002521127,0.300002685437,0.33000282665, + 0.360002944785,0.390003039857,0.420003111887,0.450003160891, + 0.480003186887,0.510003189893,0.540003169928,0.570003127008, + 0.600003061152,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.810001959429, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.96000048829,1.),.UNSPECIFIED.); +#57217 = CARTESIAN_POINT('',(-0.595807377657,-0.39,3.E-02)); +#57218 = CARTESIAN_POINT('',(-0.595838822313,-0.39,3.05999997673E-02)); +#57219 = CARTESIAN_POINT('',(-0.595870266976,-0.39,3.119999968979E-02)); +#57220 = CARTESIAN_POINT('',(-0.595901711648,-0.39,3.179999976739E-02)); +#57221 = CARTESIAN_POINT('',(-0.595964600983,-0.39,3.299999976754E-02)); +#57222 = CARTESIAN_POINT('',(-0.595996045647,-0.39,3.359999969008E-02)); +#57223 = CARTESIAN_POINT('',(-0.596027490318,-0.39,3.419999976763E-02)); +#57224 = CARTESIAN_POINT('',(-0.596090379653,-0.39,3.539999976777E-02)); +#57225 = CARTESIAN_POINT('',(-0.596121824317,-0.39,3.599999969038E-02)); +#57226 = CARTESIAN_POINT('',(-0.596153268988,-0.39,3.659999976786E-02)); +#57227 = CARTESIAN_POINT('',(-0.596216158324,-0.39,3.779999976801E-02)); +#57228 = CARTESIAN_POINT('',(-0.596247602987,-0.39,3.839999969067E-02)); +#57229 = CARTESIAN_POINT('',(-0.596279047659,-0.39,3.899999976809E-02)); +#57230 = CARTESIAN_POINT('',(-0.596341936994,-0.39,4.019999976824E-02)); +#57231 = CARTESIAN_POINT('',(-0.596373381657,-0.39,4.079999969097E-02)); +#57232 = CARTESIAN_POINT('',(-0.596404826329,-0.39,4.139999976833E-02)); +#57233 = CARTESIAN_POINT('',(-0.596467715664,-0.39,4.259999976848E-02)); +#57234 = CARTESIAN_POINT('',(-0.596499160328,-0.39,4.319999969126E-02)); +#57235 = CARTESIAN_POINT('',(-0.596530604999,-0.39,4.379999976856E-02)); +#57236 = CARTESIAN_POINT('',(-0.596593494334,-0.39,4.499999976871E-02)); +#57237 = CARTESIAN_POINT('',(-0.596624938998,-0.39,4.559999969155E-02)); +#57238 = CARTESIAN_POINT('',(-0.59665638367,-0.39,4.61999997688E-02)); +#57239 = CARTESIAN_POINT('',(-0.596719273005,-0.39,4.739999976894E-02)); +#57240 = CARTESIAN_POINT('',(-0.596750717668,-0.39,4.799999969185E-02)); +#57241 = CARTESIAN_POINT('',(-0.59678216234,-0.39,4.859999976903E-02)); +#57242 = CARTESIAN_POINT('',(-0.596845051675,-0.39,4.979999976918E-02)); +#57243 = CARTESIAN_POINT('',(-0.596876496339,-0.39,5.039999969214E-02)); +#57244 = CARTESIAN_POINT('',(-0.59690794101,-0.39,5.099999976926E-02)); +#57245 = CARTESIAN_POINT('',(-0.596970830345,-0.39,5.219999976941E-02)); +#57246 = CARTESIAN_POINT('',(-0.597002275009,-0.39,5.279999969243E-02)); +#57247 = CARTESIAN_POINT('',(-0.59703371968,-0.39,5.339999976949E-02)); +#57248 = CARTESIAN_POINT('',(-0.597096609016,-0.39,5.459999976964E-02)); +#57249 = CARTESIAN_POINT('',(-0.597128053679,-0.39,5.519999969272E-02)); +#57250 = CARTESIAN_POINT('',(-0.597159498351,-0.39,5.579999976973E-02)); +#57251 = CARTESIAN_POINT('',(-0.597222387686,-0.39,5.699999976987E-02)); +#57252 = CARTESIAN_POINT('',(-0.597253832349,-0.39,5.759999969302E-02)); +#57253 = CARTESIAN_POINT('',(-0.597285277021,-0.39,5.819999976996E-02)); +#57254 = CARTESIAN_POINT('',(-0.597348166356,-0.39,5.939999977011E-02)); +#57255 = CARTESIAN_POINT('',(-0.59737961102,-0.39,5.999999969331E-02)); +#57256 = CARTESIAN_POINT('',(-0.597411055691,-0.39,6.059999977019E-02)); +#57257 = CARTESIAN_POINT('',(-0.597473945027,-0.39,6.179999977034E-02)); +#57258 = CARTESIAN_POINT('',(-0.59750538969,-0.39,6.23999996936E-02)); +#57259 = CARTESIAN_POINT('',(-0.597536834362,-0.39,6.299999977042E-02)); +#57260 = CARTESIAN_POINT('',(-0.597599723697,-0.39,6.419999977057E-02)); +#57261 = CARTESIAN_POINT('',(-0.59763116836,-0.39,6.479999969389E-02)); +#57262 = CARTESIAN_POINT('',(-0.597662613032,-0.39,6.539999977066E-02)); +#57263 = CARTESIAN_POINT('',(-0.597725502367,-0.39,6.65999997708E-02)); +#57264 = CARTESIAN_POINT('',(-0.597756947031,-0.39,6.719999969418E-02)); +#57265 = CARTESIAN_POINT('',(-0.597788391702,-0.39,6.779999977089E-02)); +#57266 = CARTESIAN_POINT('',(-0.597851281037,-0.39,6.899999977103E-02)); +#57267 = CARTESIAN_POINT('',(-0.597882725701,-0.39,6.959999969447E-02)); +#57268 = CARTESIAN_POINT('',(-0.597914170373,-0.39,7.019999977112E-02)); +#57269 = CARTESIAN_POINT('',(-0.597977059708,-0.39,7.139999977126E-02)); +#57270 = CARTESIAN_POINT('',(-0.598008504371,-0.39,7.199999969476E-02)); +#57271 = CARTESIAN_POINT('',(-0.598039949043,-0.39,7.259999977135E-02)); +#57272 = CARTESIAN_POINT('',(-0.598102838378,-0.39,7.379999977149E-02)); +#57273 = CARTESIAN_POINT('',(-0.598134283042,-0.39,7.439999969505E-02)); +#57274 = CARTESIAN_POINT('',(-0.598165727713,-0.39,7.499999977158E-02)); +#57275 = CARTESIAN_POINT('',(-0.598228617048,-0.39,7.619999977173E-02)); +#57276 = CARTESIAN_POINT('',(-0.598260061712,-0.39,7.679999969534E-02)); +#57277 = CARTESIAN_POINT('',(-0.598291506383,-0.39,7.739999977181E-02)); +#57278 = CARTESIAN_POINT('',(-0.598354395719,-0.39,7.859999977196E-02)); +#57279 = CARTESIAN_POINT('',(-0.598385840382,-0.39,7.919999969563E-02)); +#57280 = CARTESIAN_POINT('',(-0.598417285054,-0.39,7.979999977204E-02)); +#57281 = CARTESIAN_POINT('',(-0.598480174389,-0.39,8.099999977219E-02)); +#57282 = CARTESIAN_POINT('',(-0.598511619052,-0.39,8.159999969592E-02)); +#57283 = CARTESIAN_POINT('',(-0.598543063724,-0.39,8.219999977227E-02)); +#57284 = CARTESIAN_POINT('',(-0.598605953059,-0.39,8.339999977242E-02)); +#57285 = CARTESIAN_POINT('',(-0.598637397723,-0.39,8.399999969621E-02)); +#57286 = CARTESIAN_POINT('',(-0.598668842394,-0.39,8.45999997725E-02)); +#57287 = CARTESIAN_POINT('',(-0.598731731729,-0.39,8.579999977265E-02)); +#57288 = CARTESIAN_POINT('',(-0.598763176393,-0.39,8.63999996965E-02)); +#57289 = CARTESIAN_POINT('',(-0.598794621065,-0.39,8.699999977273E-02)); +#57290 = CARTESIAN_POINT('',(-0.5988575104,-0.39,8.819999977288E-02)); +#57291 = CARTESIAN_POINT('',(-0.598888955063,-0.39,8.879999969679E-02)); +#57292 = CARTESIAN_POINT('',(-0.598920399735,-0.39,8.939999977296E-02)); +#57293 = CARTESIAN_POINT('',(-0.59898328907,-0.39,9.059999977311E-02)); +#57294 = CARTESIAN_POINT('',(-0.599014733734,-0.39,9.119999969708E-02)); +#57295 = CARTESIAN_POINT('',(-0.599046178405,-0.39,9.179999977319E-02)); +#57296 = CARTESIAN_POINT('',(-0.59910906774,-0.39,9.299999977334E-02)); +#57297 = CARTESIAN_POINT('',(-0.599140512404,-0.39,9.359999969736E-02)); +#57298 = CARTESIAN_POINT('',(-0.599171957075,-0.39,9.419999977342E-02)); +#57299 = CARTESIAN_POINT('',(-0.599234846411,-0.39,9.539999977356E-02)); +#57300 = CARTESIAN_POINT('',(-0.599266291074,-0.39,9.599999969765E-02)); +#57301 = CARTESIAN_POINT('',(-0.599297735746,-0.39,9.659999977365E-02)); +#57302 = CARTESIAN_POINT('',(-0.599360625081,-0.39,9.779999977379E-02)); +#57303 = CARTESIAN_POINT('',(-0.599392069744,-0.39,9.839999969794E-02)); +#57304 = CARTESIAN_POINT('',(-0.599423514416,-0.39,9.899999977388E-02)); +#57305 = CARTESIAN_POINT('',(-0.599486403751,-0.39,0.100199999774)); +#57306 = CARTESIAN_POINT('',(-0.599517848415,-0.39,0.100799999698)); +#57307 = CARTESIAN_POINT('',(-0.599549293086,-0.39,0.101399999774)); +#57308 = CARTESIAN_POINT('',(-0.599612182421,-0.39,0.102599999774)); +#57309 = CARTESIAN_POINT('',(-0.599643627085,-0.39,0.103199999699)); +#57310 = CARTESIAN_POINT('',(-0.599675071757,-0.39,0.103799999774)); +#57311 = CARTESIAN_POINT('',(-0.599737961092,-0.39,0.104999999774)); +#57312 = CARTESIAN_POINT('',(-0.599769405755,-0.39,0.105599999699)); +#57313 = CARTESIAN_POINT('',(-0.599800850427,-0.39,0.106199999775)); +#57314 = CARTESIAN_POINT('',(-0.599874221309,-0.39,0.107599999598)); +#57315 = CARTESIAN_POINT('',(-0.599916147525,-0.39,0.108399999463)); +#57316 = CARTESIAN_POINT('',(-0.599958073755,-0.39,0.109199999597)); +#57317 = CARTESIAN_POINT('',(-0.6,-0.39,0.11)); +#57318 = ORIENTED_EDGE('',*,*,#57319,.F.); +#57319 = EDGE_CURVE('',#57107,#57214,#57320,.T.); +#57320 = LINE('',#57321,#57322); +#57321 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57322 = VECTOR('',#57323,1.); +#57323 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#57324 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57325,#57326) + ,(#57327,#57328 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57325 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#57326 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57327 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57328 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57329 = ADVANCED_FACE('',(#57330),#57355,.F.); +#57330 = FACE_BOUND('',#57331,.F.); +#57331 = EDGE_LOOP('',(#57332,#57340,#57348,#57354)); +#57332 = ORIENTED_EDGE('',*,*,#57333,.F.); +#57333 = EDGE_CURVE('',#57334,#56417,#57336,.T.); +#57334 = VERTEX_POINT('',#57335); +#57335 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57336 = LINE('',#57337,#57338); +#57337 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57338 = VECTOR('',#57339,1.); +#57339 = DIRECTION('',(0.,0.,1.)); +#57340 = ORIENTED_EDGE('',*,*,#57341,.T.); +#57341 = EDGE_CURVE('',#57334,#57342,#57344,.T.); +#57342 = VERTEX_POINT('',#57343); +#57343 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57344 = LINE('',#57345,#57346); +#57345 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57346 = VECTOR('',#57347,1.); +#57347 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57348 = ORIENTED_EDGE('',*,*,#57349,.T.); +#57349 = EDGE_CURVE('',#57342,#56409,#57350,.T.); +#57350 = LINE('',#57351,#57352); +#57351 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57352 = VECTOR('',#57353,1.); +#57353 = DIRECTION('',(0.,0.,1.)); +#57354 = ORIENTED_EDGE('',*,*,#56416,.F.); +#57355 = PLANE('',#57356); +#57356 = AXIS2_PLACEMENT_3D('',#57357,#57358,#57359); +#57357 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#57358 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57359 = DIRECTION('',(0.,-0.,1.)); +#57360 = ADVANCED_FACE('',(#57361),#57386,.F.); +#57361 = FACE_BOUND('',#57362,.F.); +#57362 = EDGE_LOOP('',(#57363,#57371,#57379,#57385)); +#57363 = ORIENTED_EDGE('',*,*,#57364,.F.); +#57364 = EDGE_CURVE('',#57365,#56465,#57367,.T.); +#57365 = VERTEX_POINT('',#57366); +#57366 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57367 = LINE('',#57368,#57369); +#57368 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57369 = VECTOR('',#57370,1.); +#57370 = DIRECTION('',(0.,0.,1.)); +#57371 = ORIENTED_EDGE('',*,*,#57372,.T.); +#57372 = EDGE_CURVE('',#57365,#57373,#57375,.T.); +#57373 = VERTEX_POINT('',#57374); +#57374 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#57375 = LINE('',#57376,#57377); +#57376 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57377 = VECTOR('',#57378,1.); +#57378 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57379 = ORIENTED_EDGE('',*,*,#57380,.T.); +#57380 = EDGE_CURVE('',#57373,#56457,#57381,.T.); +#57381 = LINE('',#57382,#57383); +#57382 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#57383 = VECTOR('',#57384,1.); +#57384 = DIRECTION('',(0.,0.,1.)); +#57385 = ORIENTED_EDGE('',*,*,#56464,.F.); +#57386 = PLANE('',#57387); +#57387 = AXIS2_PLACEMENT_3D('',#57388,#57389,#57390); +#57388 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#57389 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57390 = DIRECTION('',(0.,0.,1.)); +#57391 = ADVANCED_FACE('',(#57392),#57613,.T.); +#57392 = FACE_BOUND('',#57393,.T.); +#57393 = EDGE_LOOP('',(#57394,#57500,#57501,#57607)); +#57394 = ORIENTED_EDGE('',*,*,#57395,.F.); +#57395 = EDGE_CURVE('',#56425,#57396,#57398,.T.); +#57396 = VERTEX_POINT('',#57397); +#57397 = CARTESIAN_POINT('',(0.6,-0.39,0.11)); +#57398 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57399,#57400,#57401,#57402, + #57403,#57404,#57405,#57406,#57407,#57408,#57409,#57410,#57411, + #57412,#57413,#57414,#57415,#57416,#57417,#57418,#57419,#57420, + #57421,#57422,#57423,#57424,#57425,#57426,#57427,#57428,#57429, + #57430,#57431,#57432,#57433,#57434,#57435,#57436,#57437,#57438, + #57439,#57440,#57441,#57442,#57443,#57444,#57445,#57446,#57447, + #57448,#57449,#57450,#57451,#57452,#57453,#57454,#57455,#57456, + #57457,#57458,#57459,#57460,#57461,#57462,#57463,#57464,#57465, + #57466,#57467,#57468,#57469,#57470,#57471,#57472,#57473,#57474, + #57475,#57476,#57477,#57478,#57479,#57480,#57481,#57482,#57483, + #57484,#57485,#57486,#57487,#57488,#57489,#57490,#57491,#57492, + #57493,#57494,#57495,#57496,#57497,#57498,#57499),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000037299321E-02,6.00007227273E-02,9.000104922037E-02, + 0.12000135249,0.150001632556,0.180001889434,0.210002123143, + 0.240002333701,0.270002521127,0.300002685437,0.33000282665, + 0.360002944784,0.390003039857,0.420003111887,0.45000316089, + 0.480003186887,0.510003189893,0.540003169928,0.570003127008, + 0.600003061152,0.630002972377,0.660002860701,0.690002726142, + 0.720002568718,0.750002388446,0.780002185344,0.810001959429, + 0.84000171072,0.870001439234,0.900001144989,0.930000828001, + 0.960000488289,1.),.UNSPECIFIED.); +#57399 = CARTESIAN_POINT('',(0.595807377657,-0.39,3.E-02)); +#57400 = CARTESIAN_POINT('',(0.595838822313,-0.39,3.059999976731E-02)); +#57401 = CARTESIAN_POINT('',(0.595870266976,-0.39,3.119999968979E-02)); +#57402 = CARTESIAN_POINT('',(0.595901711648,-0.39,3.179999976739E-02)); +#57403 = CARTESIAN_POINT('',(0.595964600983,-0.39,3.299999976754E-02)); +#57404 = CARTESIAN_POINT('',(0.595996045647,-0.39,3.359999969008E-02)); +#57405 = CARTESIAN_POINT('',(0.596027490318,-0.39,3.419999976763E-02)); +#57406 = CARTESIAN_POINT('',(0.596090379653,-0.39,3.539999976777E-02)); +#57407 = CARTESIAN_POINT('',(0.596121824317,-0.39,3.599999969038E-02)); +#57408 = CARTESIAN_POINT('',(0.596153268988,-0.39,3.659999976786E-02)); +#57409 = CARTESIAN_POINT('',(0.596216158324,-0.39,3.779999976801E-02)); +#57410 = CARTESIAN_POINT('',(0.596247602987,-0.39,3.839999969067E-02)); +#57411 = CARTESIAN_POINT('',(0.596279047659,-0.39,3.899999976809E-02)); +#57412 = CARTESIAN_POINT('',(0.596341936994,-0.39,4.019999976824E-02)); +#57413 = CARTESIAN_POINT('',(0.596373381657,-0.39,4.079999969097E-02)); +#57414 = CARTESIAN_POINT('',(0.596404826329,-0.39,4.139999976833E-02)); +#57415 = CARTESIAN_POINT('',(0.596467715664,-0.39,4.259999976848E-02)); +#57416 = CARTESIAN_POINT('',(0.596499160328,-0.39,4.319999969126E-02)); +#57417 = CARTESIAN_POINT('',(0.596530604999,-0.39,4.379999976856E-02)); +#57418 = CARTESIAN_POINT('',(0.596593494334,-0.39,4.499999976871E-02)); +#57419 = CARTESIAN_POINT('',(0.596624938998,-0.39,4.559999969155E-02)); +#57420 = CARTESIAN_POINT('',(0.59665638367,-0.39,4.61999997688E-02)); +#57421 = CARTESIAN_POINT('',(0.596719273005,-0.39,4.739999976894E-02)); +#57422 = CARTESIAN_POINT('',(0.596750717668,-0.39,4.799999969185E-02)); +#57423 = CARTESIAN_POINT('',(0.59678216234,-0.39,4.859999976903E-02)); +#57424 = CARTESIAN_POINT('',(0.596845051675,-0.39,4.979999976918E-02)); +#57425 = CARTESIAN_POINT('',(0.596876496339,-0.39,5.039999969214E-02)); +#57426 = CARTESIAN_POINT('',(0.59690794101,-0.39,5.099999976926E-02)); +#57427 = CARTESIAN_POINT('',(0.596970830345,-0.39,5.219999976941E-02)); +#57428 = CARTESIAN_POINT('',(0.597002275009,-0.39,5.279999969243E-02)); +#57429 = CARTESIAN_POINT('',(0.59703371968,-0.39,5.339999976949E-02)); +#57430 = CARTESIAN_POINT('',(0.597096609016,-0.39,5.459999976964E-02)); +#57431 = CARTESIAN_POINT('',(0.597128053679,-0.39,5.519999969272E-02)); +#57432 = CARTESIAN_POINT('',(0.597159498351,-0.39,5.579999976973E-02)); +#57433 = CARTESIAN_POINT('',(0.597222387686,-0.39,5.699999976987E-02)); +#57434 = CARTESIAN_POINT('',(0.597253832349,-0.39,5.759999969302E-02)); +#57435 = CARTESIAN_POINT('',(0.597285277021,-0.39,5.819999976996E-02)); +#57436 = CARTESIAN_POINT('',(0.597348166356,-0.39,5.939999977011E-02)); +#57437 = CARTESIAN_POINT('',(0.59737961102,-0.39,5.999999969331E-02)); +#57438 = CARTESIAN_POINT('',(0.597411055691,-0.39,6.059999977019E-02)); +#57439 = CARTESIAN_POINT('',(0.597473945027,-0.39,6.179999977034E-02)); +#57440 = CARTESIAN_POINT('',(0.59750538969,-0.39,6.23999996936E-02)); +#57441 = CARTESIAN_POINT('',(0.597536834362,-0.39,6.299999977042E-02)); +#57442 = CARTESIAN_POINT('',(0.597599723697,-0.39,6.419999977057E-02)); +#57443 = CARTESIAN_POINT('',(0.59763116836,-0.39,6.479999969389E-02)); +#57444 = CARTESIAN_POINT('',(0.597662613032,-0.39,6.539999977066E-02)); +#57445 = CARTESIAN_POINT('',(0.597725502367,-0.39,6.65999997708E-02)); +#57446 = CARTESIAN_POINT('',(0.597756947031,-0.39,6.719999969418E-02)); +#57447 = CARTESIAN_POINT('',(0.597788391702,-0.39,6.779999977089E-02)); +#57448 = CARTESIAN_POINT('',(0.597851281037,-0.39,6.899999977103E-02)); +#57449 = CARTESIAN_POINT('',(0.597882725701,-0.39,6.959999969447E-02)); +#57450 = CARTESIAN_POINT('',(0.597914170373,-0.39,7.019999977112E-02)); +#57451 = CARTESIAN_POINT('',(0.597977059708,-0.39,7.139999977126E-02)); +#57452 = CARTESIAN_POINT('',(0.598008504371,-0.39,7.199999969476E-02)); +#57453 = CARTESIAN_POINT('',(0.598039949043,-0.39,7.259999977135E-02)); +#57454 = CARTESIAN_POINT('',(0.598102838378,-0.39,7.379999977149E-02)); +#57455 = CARTESIAN_POINT('',(0.598134283042,-0.39,7.439999969505E-02)); +#57456 = CARTESIAN_POINT('',(0.598165727713,-0.39,7.499999977158E-02)); +#57457 = CARTESIAN_POINT('',(0.598228617048,-0.39,7.619999977173E-02)); +#57458 = CARTESIAN_POINT('',(0.598260061712,-0.39,7.679999969534E-02)); +#57459 = CARTESIAN_POINT('',(0.598291506383,-0.39,7.739999977181E-02)); +#57460 = CARTESIAN_POINT('',(0.598354395719,-0.39,7.859999977196E-02)); +#57461 = CARTESIAN_POINT('',(0.598385840382,-0.39,7.919999969563E-02)); +#57462 = CARTESIAN_POINT('',(0.598417285054,-0.39,7.979999977204E-02)); +#57463 = CARTESIAN_POINT('',(0.598480174389,-0.39,8.099999977219E-02)); +#57464 = CARTESIAN_POINT('',(0.598511619052,-0.39,8.159999969592E-02)); +#57465 = CARTESIAN_POINT('',(0.598543063724,-0.39,8.219999977227E-02)); +#57466 = CARTESIAN_POINT('',(0.598605953059,-0.39,8.339999977242E-02)); +#57467 = CARTESIAN_POINT('',(0.598637397723,-0.39,8.399999969621E-02)); +#57468 = CARTESIAN_POINT('',(0.598668842394,-0.39,8.45999997725E-02)); +#57469 = CARTESIAN_POINT('',(0.598731731729,-0.39,8.579999977265E-02)); +#57470 = CARTESIAN_POINT('',(0.598763176393,-0.39,8.63999996965E-02)); +#57471 = CARTESIAN_POINT('',(0.598794621065,-0.39,8.699999977273E-02)); +#57472 = CARTESIAN_POINT('',(0.5988575104,-0.39,8.819999977288E-02)); +#57473 = CARTESIAN_POINT('',(0.598888955063,-0.39,8.879999969679E-02)); +#57474 = CARTESIAN_POINT('',(0.598920399735,-0.39,8.939999977296E-02)); +#57475 = CARTESIAN_POINT('',(0.59898328907,-0.39,9.059999977311E-02)); +#57476 = CARTESIAN_POINT('',(0.599014733734,-0.39,9.119999969708E-02)); +#57477 = CARTESIAN_POINT('',(0.599046178405,-0.39,9.179999977319E-02)); +#57478 = CARTESIAN_POINT('',(0.59910906774,-0.39,9.299999977334E-02)); +#57479 = CARTESIAN_POINT('',(0.599140512404,-0.39,9.359999969737E-02)); +#57480 = CARTESIAN_POINT('',(0.599171957075,-0.39,9.419999977342E-02)); +#57481 = CARTESIAN_POINT('',(0.599234846411,-0.39,9.539999977356E-02)); +#57482 = CARTESIAN_POINT('',(0.599266291074,-0.39,9.599999969765E-02)); +#57483 = CARTESIAN_POINT('',(0.599297735746,-0.39,9.659999977365E-02)); +#57484 = CARTESIAN_POINT('',(0.599360625081,-0.39,9.779999977379E-02)); +#57485 = CARTESIAN_POINT('',(0.599392069744,-0.39,9.839999969794E-02)); +#57486 = CARTESIAN_POINT('',(0.599423514416,-0.39,9.899999977388E-02)); +#57487 = CARTESIAN_POINT('',(0.599486403751,-0.39,0.100199999774)); +#57488 = CARTESIAN_POINT('',(0.599517848415,-0.39,0.100799999698)); +#57489 = CARTESIAN_POINT('',(0.599549293086,-0.39,0.101399999774)); +#57490 = CARTESIAN_POINT('',(0.599612182421,-0.39,0.102599999774)); +#57491 = CARTESIAN_POINT('',(0.599643627085,-0.39,0.103199999699)); +#57492 = CARTESIAN_POINT('',(0.599675071757,-0.39,0.103799999774)); +#57493 = CARTESIAN_POINT('',(0.599737961092,-0.39,0.104999999774)); +#57494 = CARTESIAN_POINT('',(0.599769405755,-0.39,0.105599999699)); +#57495 = CARTESIAN_POINT('',(0.599800850427,-0.39,0.106199999775)); +#57496 = CARTESIAN_POINT('',(0.599874221309,-0.39,0.107599999598)); +#57497 = CARTESIAN_POINT('',(0.599916147525,-0.39,0.108399999463)); +#57498 = CARTESIAN_POINT('',(0.599958073755,-0.39,0.109199999597)); +#57499 = CARTESIAN_POINT('',(0.6,-0.39,0.11)); +#57500 = ORIENTED_EDGE('',*,*,#56424,.T.); +#57501 = ORIENTED_EDGE('',*,*,#57502,.T.); +#57502 = EDGE_CURVE('',#56417,#57503,#57505,.T.); +#57503 = VERTEX_POINT('',#57504); +#57504 = CARTESIAN_POINT('',(0.6,-0.11,0.11)); +#57505 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57506,#57507,#57508,#57509, + #57510,#57511,#57512,#57513,#57514,#57515,#57516,#57517,#57518, + #57519,#57520,#57521,#57522,#57523,#57524,#57525,#57526,#57527, + #57528,#57529,#57530,#57531,#57532,#57533,#57534,#57535,#57536, + #57537,#57538,#57539,#57540,#57541,#57542,#57543,#57544,#57545, + #57546,#57547,#57548,#57549,#57550,#57551,#57552,#57553,#57554, + #57555,#57556,#57557,#57558,#57559,#57560,#57561,#57562,#57563, + #57564,#57565,#57566,#57567,#57568,#57569,#57570,#57571,#57572, + #57573,#57574,#57575,#57576,#57577,#57578,#57579,#57580,#57581, + #57582,#57583,#57584,#57585,#57586,#57587,#57588,#57589,#57590, + #57591,#57592,#57593,#57594,#57595,#57596,#57597,#57598,#57599, + #57600,#57601,#57602,#57603,#57604,#57605,#57606),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000003027794E-02,6.000005866757E-02,9.000008517037E-02, + 0.120000109788,0.150000132521,0.180000153373,0.210000172343, + 0.240000189434,0.270000204647,0.300000217984,0.330000229446, + 0.360000239034,0.39000024675,0.420000252596,0.450000256572, + 0.480000258682,0.510000258925,0.540000257303,0.570000253818, + 0.600000248471,0.630000241265,0.660000232199,0.690000221276, + 0.720000208498,0.750000193864,0.780000177378,0.810000159041, + 0.840000138853,0.870000116817,0.900000092934,0.930000067205, + 0.960000039632,1.),.UNSPECIFIED.); +#57506 = CARTESIAN_POINT('',(0.595807377657,-0.11,3.E-02)); +#57507 = CARTESIAN_POINT('',(0.595838822324,-0.11,3.059999998111E-02)); +#57508 = CARTESIAN_POINT('',(0.595870266991,-0.11,3.119999997481E-02)); +#57509 = CARTESIAN_POINT('',(0.595901711659,-0.11,3.179999998111E-02)); +#57510 = CARTESIAN_POINT('',(0.595964600994,-0.11,3.299999998113E-02)); +#57511 = CARTESIAN_POINT('',(0.595996045661,-0.11,3.359999997484E-02)); +#57512 = CARTESIAN_POINT('',(0.596027490329,-0.11,3.419999998113E-02)); +#57513 = CARTESIAN_POINT('',(0.596090379664,-0.11,3.539999998115E-02)); +#57514 = CARTESIAN_POINT('',(0.596121824332,-0.11,3.599999997486E-02)); +#57515 = CARTESIAN_POINT('',(0.596153269,-0.11,3.659999998115E-02)); +#57516 = CARTESIAN_POINT('',(0.596216158335,-0.11,3.779999998117E-02)); +#57517 = CARTESIAN_POINT('',(0.596247603002,-0.11,3.839999997489E-02)); +#57518 = CARTESIAN_POINT('',(0.59627904767,-0.11,3.899999998117E-02)); +#57519 = CARTESIAN_POINT('',(0.596341937005,-0.11,4.019999998118E-02)); +#57520 = CARTESIAN_POINT('',(0.596373381672,-0.11,4.079999997491E-02)); +#57521 = CARTESIAN_POINT('',(0.59640482634,-0.11,4.139999998119E-02)); +#57522 = CARTESIAN_POINT('',(0.596467715675,-0.11,4.25999999812E-02)); +#57523 = CARTESIAN_POINT('',(0.596499160343,-0.11,4.319999997494E-02)); +#57524 = CARTESIAN_POINT('',(0.59653060501,-0.11,4.379999998121E-02)); +#57525 = CARTESIAN_POINT('',(0.596593494346,-0.11,4.499999998122E-02)); +#57526 = CARTESIAN_POINT('',(0.596624939013,-0.11,4.559999997496E-02)); +#57527 = CARTESIAN_POINT('',(0.596656383681,-0.11,4.619999998123E-02)); +#57528 = CARTESIAN_POINT('',(0.596719273016,-0.11,4.739999998124E-02)); +#57529 = CARTESIAN_POINT('',(0.596750717683,-0.11,4.799999997498E-02)); +#57530 = CARTESIAN_POINT('',(0.596782162351,-0.11,4.859999998125E-02)); +#57531 = CARTESIAN_POINT('',(0.596845051686,-0.11,4.979999998126E-02)); +#57532 = CARTESIAN_POINT('',(0.596876496353,-0.11,5.039999997501E-02)); +#57533 = CARTESIAN_POINT('',(0.596907941021,-0.11,5.099999998127E-02)); +#57534 = CARTESIAN_POINT('',(0.596970830356,-0.11,5.219999998128E-02)); +#57535 = CARTESIAN_POINT('',(0.597002275024,-0.11,5.279999997503E-02)); +#57536 = CARTESIAN_POINT('',(0.597033719692,-0.11,5.339999998129E-02)); +#57537 = CARTESIAN_POINT('',(0.597096609027,-0.11,5.45999999813E-02)); +#57538 = CARTESIAN_POINT('',(0.597128053694,-0.11,5.519999997506E-02)); +#57539 = CARTESIAN_POINT('',(0.597159498362,-0.11,5.579999998131E-02)); +#57540 = CARTESIAN_POINT('',(0.597222387697,-0.11,5.699999998132E-02)); +#57541 = CARTESIAN_POINT('',(0.597253832364,-0.11,5.759999997508E-02)); +#57542 = CARTESIAN_POINT('',(0.597285277032,-0.11,5.819999998133E-02)); +#57543 = CARTESIAN_POINT('',(0.597348166367,-0.11,5.939999998134E-02)); +#57544 = CARTESIAN_POINT('',(0.597379611035,-0.11,5.99999999751E-02)); +#57545 = CARTESIAN_POINT('',(0.597411055702,-0.11,6.059999998134E-02)); +#57546 = CARTESIAN_POINT('',(0.597473945038,-0.11,6.179999998136E-02)); +#57547 = CARTESIAN_POINT('',(0.597505389705,-0.11,6.239999997513E-02)); +#57548 = CARTESIAN_POINT('',(0.597536834373,-0.11,6.299999998136E-02)); +#57549 = CARTESIAN_POINT('',(0.597599723708,-0.11,6.419999998138E-02)); +#57550 = CARTESIAN_POINT('',(0.597631168375,-0.11,6.479999997515E-02)); +#57551 = CARTESIAN_POINT('',(0.597662613043,-0.11,6.539999998138E-02)); +#57552 = CARTESIAN_POINT('',(0.597725502378,-0.11,6.659999998139E-02)); +#57553 = CARTESIAN_POINT('',(0.597756947045,-0.11,6.719999997518E-02)); +#57554 = CARTESIAN_POINT('',(0.597788391713,-0.11,6.77999999814E-02)); +#57555 = CARTESIAN_POINT('',(0.597851281048,-0.11,6.899999998141E-02)); +#57556 = CARTESIAN_POINT('',(0.597882725716,-0.11,6.95999999752E-02)); +#57557 = CARTESIAN_POINT('',(0.597914170384,-0.11,7.019999998142E-02)); +#57558 = CARTESIAN_POINT('',(0.597977059719,-0.11,7.139999998143E-02)); +#57559 = CARTESIAN_POINT('',(0.598008504386,-0.11,7.199999997522E-02)); +#57560 = CARTESIAN_POINT('',(0.598039949054,-0.11,7.259999998144E-02)); +#57561 = CARTESIAN_POINT('',(0.598102838389,-0.11,7.379999998145E-02)); +#57562 = CARTESIAN_POINT('',(0.598134283056,-0.11,7.439999997525E-02)); +#57563 = CARTESIAN_POINT('',(0.598165727724,-0.11,7.499999998146E-02)); +#57564 = CARTESIAN_POINT('',(0.598228617059,-0.11,7.619999998147E-02)); +#57565 = CARTESIAN_POINT('',(0.598260061727,-0.11,7.679999997527E-02)); +#57566 = CARTESIAN_POINT('',(0.598291506394,-0.11,7.739999998148E-02)); +#57567 = CARTESIAN_POINT('',(0.59835439573,-0.11,7.859999998149E-02)); +#57568 = CARTESIAN_POINT('',(0.598385840397,-0.11,7.919999997529E-02)); +#57569 = CARTESIAN_POINT('',(0.598417285065,-0.11,7.97999999815E-02)); +#57570 = CARTESIAN_POINT('',(0.5984801744,-0.11,8.099999998151E-02)); +#57571 = CARTESIAN_POINT('',(0.598511619067,-0.11,8.159999997532E-02)); +#57572 = CARTESIAN_POINT('',(0.598543063735,-0.11,8.219999998151E-02)); +#57573 = CARTESIAN_POINT('',(0.59860595307,-0.11,8.339999998153E-02)); +#57574 = CARTESIAN_POINT('',(0.598637397737,-0.11,8.399999997534E-02)); +#57575 = CARTESIAN_POINT('',(0.598668842405,-0.11,8.459999998153E-02)); +#57576 = CARTESIAN_POINT('',(0.59873173174,-0.11,8.579999998155E-02)); +#57577 = CARTESIAN_POINT('',(0.598763176408,-0.11,8.639999997536E-02)); +#57578 = CARTESIAN_POINT('',(0.598794621076,-0.11,8.699999998155E-02)); +#57579 = CARTESIAN_POINT('',(0.598857510411,-0.11,8.819999998156E-02)); +#57580 = CARTESIAN_POINT('',(0.598888955078,-0.11,8.879999997539E-02)); +#57581 = CARTESIAN_POINT('',(0.598920399746,-0.11,8.939999998157E-02)); +#57582 = CARTESIAN_POINT('',(0.598983289081,-0.11,9.059999998158E-02)); +#57583 = CARTESIAN_POINT('',(0.599014733748,-0.11,9.119999997541E-02)); +#57584 = CARTESIAN_POINT('',(0.599046178416,-0.11,9.179999998159E-02)); +#57585 = CARTESIAN_POINT('',(0.599109067751,-0.11,9.29999999816E-02)); +#57586 = CARTESIAN_POINT('',(0.599140512418,-0.11,9.359999997544E-02)); +#57587 = CARTESIAN_POINT('',(0.599171957086,-0.11,9.419999998161E-02)); +#57588 = CARTESIAN_POINT('',(0.599234846422,-0.11,9.539999998162E-02)); +#57589 = CARTESIAN_POINT('',(0.599266291089,-0.11,9.599999997546E-02)); +#57590 = CARTESIAN_POINT('',(0.599297735757,-0.11,9.659999998163E-02)); +#57591 = CARTESIAN_POINT('',(0.599360625092,-0.11,9.779999998164E-02)); +#57592 = CARTESIAN_POINT('',(0.599392069759,-0.11,9.839999997548E-02)); +#57593 = CARTESIAN_POINT('',(0.599423514427,-0.11,9.899999998165E-02)); +#57594 = CARTESIAN_POINT('',(0.599486403762,-0.11,0.100199999982)); +#57595 = CARTESIAN_POINT('',(0.599517848429,-0.11,0.100799999976)); +#57596 = CARTESIAN_POINT('',(0.599549293097,-0.11,0.101399999982)); +#57597 = CARTESIAN_POINT('',(0.599612182432,-0.11,0.102599999982)); +#57598 = CARTESIAN_POINT('',(0.5996436271,-0.11,0.103199999976)); +#57599 = CARTESIAN_POINT('',(0.599675071767,-0.11,0.103799999982)); +#57600 = CARTESIAN_POINT('',(0.599737961103,-0.11,0.104999999982)); +#57601 = CARTESIAN_POINT('',(0.59976940577,-0.11,0.105599999976)); +#57602 = CARTESIAN_POINT('',(0.599800850438,-0.11,0.106199999982)); +#57603 = CARTESIAN_POINT('',(0.599874221328,-0.11,0.107599999967)); +#57604 = CARTESIAN_POINT('',(0.599916147551,-0.11,0.108399999956)); +#57605 = CARTESIAN_POINT('',(0.599958073775,-0.11,0.109199999967)); +#57606 = CARTESIAN_POINT('',(0.6,-0.11,0.11)); +#57607 = ORIENTED_EDGE('',*,*,#57608,.F.); +#57608 = EDGE_CURVE('',#57396,#57503,#57609,.T.); +#57609 = LINE('',#57610,#57611); +#57610 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57611 = VECTOR('',#57612,1.); +#57612 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57613 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57614,#57615) + ,(#57616,#57617 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57614 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57615 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57616 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#57617 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57618 = ADVANCED_FACE('',(#57619),#57741,.T.); +#57619 = FACE_BOUND('',#57620,.T.); +#57620 = EDGE_LOOP('',(#57621,#57727,#57728,#57735)); +#57621 = ORIENTED_EDGE('',*,*,#57622,.F.); +#57622 = EDGE_CURVE('',#56457,#57623,#57625,.T.); +#57623 = VERTEX_POINT('',#57624); +#57624 = CARTESIAN_POINT('',(-0.6,-0.61,0.11)); +#57625 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57626,#57627,#57628,#57629, + #57630,#57631,#57632,#57633,#57634,#57635,#57636,#57637,#57638, + #57639,#57640,#57641,#57642,#57643,#57644,#57645,#57646,#57647, + #57648,#57649,#57650,#57651,#57652,#57653,#57654,#57655,#57656, + #57657,#57658,#57659,#57660,#57661,#57662,#57663,#57664,#57665, + #57666,#57667,#57668,#57669,#57670,#57671,#57672,#57673,#57674, + #57675,#57676,#57677,#57678,#57679,#57680,#57681,#57682,#57683, + #57684,#57685,#57686,#57687,#57688,#57689,#57690,#57691,#57692, + #57693,#57694,#57695,#57696,#57697,#57698,#57699,#57700,#57701, + #57702,#57703,#57704,#57705,#57706,#57707,#57708,#57709,#57710, + #57711,#57712,#57713,#57714,#57715,#57716,#57717,#57718,#57719, + #57720,#57721,#57722,#57723,#57724,#57725,#57726),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527396E-02,6.000171535367E-02,9.000249028108E-02, + 0.120003210098,0.150003874847,0.180004484568,0.210005039305, + 0.240005539099,0.270005983992,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.42000738639,0.450007502748, + 0.480007564495,0.510007571674,0.540007524325,0.570007422489, + 0.600007266209,0.630007055525,0.660006790478,0.69000647111, + 0.720006097463,0.750005669576,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#57626 = CARTESIAN_POINT('',(-0.595807377657,-0.61,3.E-02)); +#57627 = CARTESIAN_POINT('',(-0.595838822296,-0.61,3.059999944783E-02)); +#57628 = CARTESIAN_POINT('',(-0.595870266954,-0.61,3.119999926389E-02)); +#57629 = CARTESIAN_POINT('',(-0.595901711631,-0.61,3.179999944803E-02)); +#57630 = CARTESIAN_POINT('',(-0.595964600966,-0.61,3.299999944838E-02)); +#57631 = CARTESIAN_POINT('',(-0.595996045624,-0.61,3.359999926458E-02)); +#57632 = CARTESIAN_POINT('',(-0.596027490301,-0.61,3.419999944858E-02)); +#57633 = CARTESIAN_POINT('',(-0.596090379637,-0.61,3.539999944893E-02)); +#57634 = CARTESIAN_POINT('',(-0.596121824295,-0.61,3.599999926526E-02)); +#57635 = CARTESIAN_POINT('',(-0.596153268972,-0.61,3.659999944913E-02)); +#57636 = CARTESIAN_POINT('',(-0.596216158307,-0.61,3.779999944948E-02)); +#57637 = CARTESIAN_POINT('',(-0.596247602965,-0.61,3.839999926595E-02)); +#57638 = CARTESIAN_POINT('',(-0.596279047642,-0.61,3.899999944968E-02)); +#57639 = CARTESIAN_POINT('',(-0.596341936977,-0.61,4.019999945003E-02)); +#57640 = CARTESIAN_POINT('',(-0.596373381635,-0.61,4.079999926664E-02)); +#57641 = CARTESIAN_POINT('',(-0.596404826312,-0.61,4.139999945023E-02)); +#57642 = CARTESIAN_POINT('',(-0.596467715648,-0.61,4.259999945058E-02)); +#57643 = CARTESIAN_POINT('',(-0.596499160305,-0.61,4.319999926733E-02)); +#57644 = CARTESIAN_POINT('',(-0.596530604983,-0.61,4.379999945078E-02)); +#57645 = CARTESIAN_POINT('',(-0.596593494318,-0.61,4.499999945112E-02)); +#57646 = CARTESIAN_POINT('',(-0.596624938976,-0.61,4.559999926801E-02)); +#57647 = CARTESIAN_POINT('',(-0.596656383653,-0.61,4.619999945133E-02)); +#57648 = CARTESIAN_POINT('',(-0.596719272988,-0.61,4.739999945167E-02)); +#57649 = CARTESIAN_POINT('',(-0.596750717646,-0.61,4.79999992687E-02)); +#57650 = CARTESIAN_POINT('',(-0.596782162323,-0.61,4.859999945188E-02)); +#57651 = CARTESIAN_POINT('',(-0.596845051658,-0.61,4.979999945222E-02)); +#57652 = CARTESIAN_POINT('',(-0.596876496316,-0.61,5.039999926939E-02)); +#57653 = CARTESIAN_POINT('',(-0.596907940994,-0.61,5.099999945242E-02)); +#57654 = CARTESIAN_POINT('',(-0.596970830329,-0.61,5.219999945277E-02)); +#57655 = CARTESIAN_POINT('',(-0.597002274987,-0.61,5.279999927007E-02)); +#57656 = CARTESIAN_POINT('',(-0.597033719664,-0.61,5.339999945297E-02)); +#57657 = CARTESIAN_POINT('',(-0.597096608999,-0.61,5.459999945331E-02)); +#57658 = CARTESIAN_POINT('',(-0.597128053657,-0.61,5.519999927076E-02)); +#57659 = CARTESIAN_POINT('',(-0.597159498334,-0.61,5.579999945351E-02)); +#57660 = CARTESIAN_POINT('',(-0.597222387669,-0.61,5.699999945386E-02)); +#57661 = CARTESIAN_POINT('',(-0.597253832327,-0.61,5.759999927144E-02)); +#57662 = CARTESIAN_POINT('',(-0.597285277005,-0.61,5.819999945406E-02)); +#57663 = CARTESIAN_POINT('',(-0.59734816634,-0.61,5.93999994544E-02)); +#57664 = CARTESIAN_POINT('',(-0.597379610998,-0.61,5.999999927213E-02)); +#57665 = CARTESIAN_POINT('',(-0.597411055675,-0.61,6.059999945461E-02)); +#57666 = CARTESIAN_POINT('',(-0.59747394501,-0.61,6.179999945495E-02)); +#57667 = CARTESIAN_POINT('',(-0.597505389668,-0.61,6.239999927281E-02)); +#57668 = CARTESIAN_POINT('',(-0.597536834345,-0.61,6.299999945515E-02)); +#57669 = CARTESIAN_POINT('',(-0.59759972368,-0.61,6.419999945549E-02)); +#57670 = CARTESIAN_POINT('',(-0.597631168338,-0.61,6.479999927349E-02)); +#57671 = CARTESIAN_POINT('',(-0.597662613015,-0.61,6.539999945569E-02)); +#57672 = CARTESIAN_POINT('',(-0.597725502351,-0.61,6.659999945604E-02)); +#57673 = CARTESIAN_POINT('',(-0.597756947009,-0.61,6.719999927417E-02)); +#57674 = CARTESIAN_POINT('',(-0.597788391686,-0.61,6.779999945624E-02)); +#57675 = CARTESIAN_POINT('',(-0.597851281021,-0.61,6.899999945658E-02)); +#57676 = CARTESIAN_POINT('',(-0.597882725679,-0.61,6.959999927485E-02)); +#57677 = CARTESIAN_POINT('',(-0.597914170356,-0.61,7.019999945678E-02)); +#57678 = CARTESIAN_POINT('',(-0.597977059691,-0.61,7.139999945712E-02)); +#57679 = CARTESIAN_POINT('',(-0.598008504349,-0.61,7.199999927553E-02)); +#57680 = CARTESIAN_POINT('',(-0.598039949026,-0.61,7.259999945732E-02)); +#57681 = CARTESIAN_POINT('',(-0.598102838362,-0.61,7.379999945766E-02)); +#57682 = CARTESIAN_POINT('',(-0.59813428302,-0.61,7.439999927621E-02)); +#57683 = CARTESIAN_POINT('',(-0.598165727697,-0.61,7.499999945787E-02)); +#57684 = CARTESIAN_POINT('',(-0.598228617032,-0.61,7.619999945821E-02)); +#57685 = CARTESIAN_POINT('',(-0.59826006169,-0.61,7.679999927689E-02)); +#57686 = CARTESIAN_POINT('',(-0.598291506367,-0.61,7.739999945841E-02)); +#57687 = CARTESIAN_POINT('',(-0.598354395702,-0.61,7.859999945875E-02)); +#57688 = CARTESIAN_POINT('',(-0.59838584036,-0.61,7.919999927757E-02)); +#57689 = CARTESIAN_POINT('',(-0.598417285037,-0.61,7.979999945895E-02)); +#57690 = CARTESIAN_POINT('',(-0.598480174372,-0.61,8.099999945929E-02)); +#57691 = CARTESIAN_POINT('',(-0.598511619031,-0.61,8.159999927825E-02)); +#57692 = CARTESIAN_POINT('',(-0.598543063708,-0.61,8.219999945949E-02)); +#57693 = CARTESIAN_POINT('',(-0.598605953043,-0.61,8.339999945983E-02)); +#57694 = CARTESIAN_POINT('',(-0.598637397701,-0.61,8.399999927893E-02)); +#57695 = CARTESIAN_POINT('',(-0.598668842378,-0.61,8.459999946003E-02)); +#57696 = CARTESIAN_POINT('',(-0.598731731713,-0.61,8.579999946037E-02)); +#57697 = CARTESIAN_POINT('',(-0.598763176371,-0.61,8.63999992796E-02)); +#57698 = CARTESIAN_POINT('',(-0.598794621048,-0.61,8.699999946057E-02)); +#57699 = CARTESIAN_POINT('',(-0.598857510383,-0.61,8.819999946091E-02)); +#57700 = CARTESIAN_POINT('',(-0.598888955041,-0.61,8.879999928028E-02)); +#57701 = CARTESIAN_POINT('',(-0.598920399719,-0.61,8.939999946111E-02)); +#57702 = CARTESIAN_POINT('',(-0.598983289054,-0.61,9.059999946145E-02)); +#57703 = CARTESIAN_POINT('',(-0.599014733712,-0.61,9.119999928096E-02)); +#57704 = CARTESIAN_POINT('',(-0.599046178389,-0.61,9.179999946165E-02)); +#57705 = CARTESIAN_POINT('',(-0.599109067724,-0.61,9.299999946199E-02)); +#57706 = CARTESIAN_POINT('',(-0.599140512382,-0.61,9.359999928163E-02)); +#57707 = CARTESIAN_POINT('',(-0.599171957059,-0.61,9.419999946219E-02)); +#57708 = CARTESIAN_POINT('',(-0.599234846394,-0.61,9.539999946253E-02)); +#57709 = CARTESIAN_POINT('',(-0.599266291052,-0.61,9.599999928231E-02)); +#57710 = CARTESIAN_POINT('',(-0.599297735729,-0.61,9.659999946273E-02)); +#57711 = CARTESIAN_POINT('',(-0.599360625065,-0.61,9.779999946306E-02)); +#57712 = CARTESIAN_POINT('',(-0.599392069723,-0.61,9.839999928298E-02)); +#57713 = CARTESIAN_POINT('',(-0.5994235144,-0.61,9.899999946326E-02)); +#57714 = CARTESIAN_POINT('',(-0.599486403735,-0.61,0.100199999464)); +#57715 = CARTESIAN_POINT('',(-0.599517848393,-0.61,0.100799999284)); +#57716 = CARTESIAN_POINT('',(-0.59954929307,-0.61,0.101399999464)); +#57717 = CARTESIAN_POINT('',(-0.599612182405,-0.61,0.102599999464)); +#57718 = CARTESIAN_POINT('',(-0.599643627063,-0.61,0.103199999284)); +#57719 = CARTESIAN_POINT('',(-0.59967507174,-0.61,0.103799999464)); +#57720 = CARTESIAN_POINT('',(-0.599737961076,-0.61,0.104999999465)); +#57721 = CARTESIAN_POINT('',(-0.599769405734,-0.61,0.105599999285)); +#57722 = CARTESIAN_POINT('',(-0.599800850411,-0.61,0.106199999465)); +#57723 = CARTESIAN_POINT('',(-0.59987422128,-0.61,0.107599999045)); +#57724 = CARTESIAN_POINT('',(-0.599916147486,-0.61,0.108399998725)); +#57725 = CARTESIAN_POINT('',(-0.599958073726,-0.61,0.109199999043)); +#57726 = CARTESIAN_POINT('',(-0.6,-0.61,0.11)); +#57727 = ORIENTED_EDGE('',*,*,#56456,.T.); +#57728 = ORIENTED_EDGE('',*,*,#57729,.T.); +#57729 = EDGE_CURVE('',#56449,#57730,#57732,.T.); +#57730 = VERTEX_POINT('',#57731); +#57731 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57732 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57733,#57734),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57733 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57734 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57735 = ORIENTED_EDGE('',*,*,#57736,.F.); +#57736 = EDGE_CURVE('',#57623,#57730,#57737,.T.); +#57737 = LINE('',#57738,#57739); +#57738 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57739 = VECTOR('',#57740,1.); +#57740 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#57741 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57742,#57743) + ,(#57744,#57745 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57742 = CARTESIAN_POINT('',(-0.595807377657,0.795807377657,3.E-02)); +#57743 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#57744 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57745 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57746 = ADVANCED_FACE('',(#57747),#57772,.F.); +#57747 = FACE_BOUND('',#57748,.F.); +#57748 = EDGE_LOOP('',(#57749,#57757,#57765,#57771)); +#57749 = ORIENTED_EDGE('',*,*,#57750,.F.); +#57750 = EDGE_CURVE('',#57751,#56433,#57753,.T.); +#57751 = VERTEX_POINT('',#57752); +#57752 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57753 = LINE('',#57754,#57755); +#57754 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57755 = VECTOR('',#57756,1.); +#57756 = DIRECTION('',(0.,0.,1.)); +#57757 = ORIENTED_EDGE('',*,*,#57758,.T.); +#57758 = EDGE_CURVE('',#57751,#57759,#57761,.T.); +#57759 = VERTEX_POINT('',#57760); +#57760 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#57761 = LINE('',#57762,#57763); +#57762 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57763 = VECTOR('',#57764,1.); +#57764 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57765 = ORIENTED_EDGE('',*,*,#57766,.T.); +#57766 = EDGE_CURVE('',#57759,#56425,#57767,.T.); +#57767 = LINE('',#57768,#57769); +#57768 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#57769 = VECTOR('',#57770,1.); +#57770 = DIRECTION('',(0.,0.,1.)); +#57771 = ORIENTED_EDGE('',*,*,#56432,.F.); +#57772 = PLANE('',#57773); +#57773 = AXIS2_PLACEMENT_3D('',#57774,#57775,#57776); +#57774 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#57775 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57776 = DIRECTION('',(0.,-0.,1.)); +#57777 = ADVANCED_FACE('',(#57778),#57795,.T.); +#57778 = FACE_BOUND('',#57779,.T.); +#57779 = EDGE_LOOP('',(#57780,#57781,#57788,#57794)); +#57780 = ORIENTED_EDGE('',*,*,#56448,.T.); +#57781 = ORIENTED_EDGE('',*,*,#57782,.T.); +#57782 = EDGE_CURVE('',#56441,#57783,#57785,.T.); +#57783 = VERTEX_POINT('',#57784); +#57784 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57785 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57786,#57787),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57786 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57787 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57788 = ORIENTED_EDGE('',*,*,#57789,.F.); +#57789 = EDGE_CURVE('',#57730,#57783,#57790,.T.); +#57790 = LINE('',#57791,#57792); +#57791 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57792 = VECTOR('',#57793,1.); +#57793 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#57794 = ORIENTED_EDGE('',*,*,#57729,.F.); +#57795 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57796,#57797) + ,(#57798,#57799 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57796 = CARTESIAN_POINT('',(-0.595807377657,-0.795807377657,3.E-02)); +#57797 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#57798 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57799 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57800 = ADVANCED_FACE('',(#57801),#57917,.T.); +#57801 = FACE_BOUND('',#57802,.T.); +#57802 = EDGE_LOOP('',(#57803,#57804,#57805,#57911)); +#57803 = ORIENTED_EDGE('',*,*,#57782,.F.); +#57804 = ORIENTED_EDGE('',*,*,#56440,.T.); +#57805 = ORIENTED_EDGE('',*,*,#57806,.T.); +#57806 = EDGE_CURVE('',#56433,#57807,#57809,.T.); +#57807 = VERTEX_POINT('',#57808); +#57808 = CARTESIAN_POINT('',(0.6,-0.61,0.11)); +#57809 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#57810,#57811,#57812,#57813, + #57814,#57815,#57816,#57817,#57818,#57819,#57820,#57821,#57822, + #57823,#57824,#57825,#57826,#57827,#57828,#57829,#57830,#57831, + #57832,#57833,#57834,#57835,#57836,#57837,#57838,#57839,#57840, + #57841,#57842,#57843,#57844,#57845,#57846,#57847,#57848,#57849, + #57850,#57851,#57852,#57853,#57854,#57855,#57856,#57857,#57858, + #57859,#57860,#57861,#57862,#57863,#57864,#57865,#57866,#57867, + #57868,#57869,#57870,#57871,#57872,#57873,#57874,#57875,#57876, + #57877,#57878,#57879,#57880,#57881,#57882,#57883,#57884,#57885, + #57886,#57887,#57888,#57889,#57890,#57891,#57892,#57893,#57894, + #57895,#57896,#57897,#57898,#57899,#57900,#57901,#57902,#57903, + #57904,#57905,#57906,#57907,#57908,#57909,#57910),.UNSPECIFIED.,.F., + .F.,(5,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3 + ,5),(0.,3.000088527394E-02,6.000171535362E-02,9.0002490281E-02, + 0.120003210098,0.150003874846,0.180004484568,0.210005039305, + 0.240005539099,0.270005983991,0.300006374024,0.330006709239, + 0.360006989677,0.39000721538,0.420007386389,0.450007502747, + 0.480007564495,0.510007571673,0.540007524324,0.570007422489, + 0.600007266208,0.630007055524,0.660006790478,0.69000647111, + 0.720006097462,0.750005669575,0.780005187491,0.810004651249, + 0.840004060892,0.87000341646,0.900002717994,0.930001965535, + 0.960001159124,1.),.UNSPECIFIED.); +#57810 = CARTESIAN_POINT('',(0.595807377657,-0.61,3.E-02)); +#57811 = CARTESIAN_POINT('',(0.595838822296,-0.61,3.059999944783E-02)); +#57812 = CARTESIAN_POINT('',(0.595870266954,-0.61,3.119999926388E-02)); +#57813 = CARTESIAN_POINT('',(0.595901711631,-0.61,3.179999944803E-02)); +#57814 = CARTESIAN_POINT('',(0.595964600966,-0.61,3.299999944838E-02)); +#57815 = CARTESIAN_POINT('',(0.595996045624,-0.61,3.359999926458E-02)); +#57816 = CARTESIAN_POINT('',(0.596027490301,-0.61,3.419999944858E-02)); +#57817 = CARTESIAN_POINT('',(0.596090379637,-0.61,3.539999944893E-02)); +#57818 = CARTESIAN_POINT('',(0.596121824295,-0.61,3.599999926526E-02)); +#57819 = CARTESIAN_POINT('',(0.596153268972,-0.61,3.659999944913E-02)); +#57820 = CARTESIAN_POINT('',(0.596216158307,-0.61,3.779999944948E-02)); +#57821 = CARTESIAN_POINT('',(0.596247602965,-0.61,3.839999926595E-02)); +#57822 = CARTESIAN_POINT('',(0.596279047642,-0.61,3.899999944968E-02)); +#57823 = CARTESIAN_POINT('',(0.596341936977,-0.61,4.019999945003E-02)); +#57824 = CARTESIAN_POINT('',(0.596373381635,-0.61,4.079999926664E-02)); +#57825 = CARTESIAN_POINT('',(0.596404826312,-0.61,4.139999945023E-02)); +#57826 = CARTESIAN_POINT('',(0.596467715648,-0.61,4.259999945058E-02)); +#57827 = CARTESIAN_POINT('',(0.596499160305,-0.61,4.319999926733E-02)); +#57828 = CARTESIAN_POINT('',(0.596530604983,-0.61,4.379999945078E-02)); +#57829 = CARTESIAN_POINT('',(0.596593494318,-0.61,4.499999945112E-02)); +#57830 = CARTESIAN_POINT('',(0.596624938976,-0.61,4.559999926801E-02)); +#57831 = CARTESIAN_POINT('',(0.596656383653,-0.61,4.619999945133E-02)); +#57832 = CARTESIAN_POINT('',(0.596719272988,-0.61,4.739999945167E-02)); +#57833 = CARTESIAN_POINT('',(0.596750717646,-0.61,4.79999992687E-02)); +#57834 = CARTESIAN_POINT('',(0.596782162323,-0.61,4.859999945188E-02)); +#57835 = CARTESIAN_POINT('',(0.596845051658,-0.61,4.979999945222E-02)); +#57836 = CARTESIAN_POINT('',(0.596876496316,-0.61,5.039999926939E-02)); +#57837 = CARTESIAN_POINT('',(0.596907940994,-0.61,5.099999945242E-02)); +#57838 = CARTESIAN_POINT('',(0.596970830329,-0.61,5.219999945277E-02)); +#57839 = CARTESIAN_POINT('',(0.597002274987,-0.61,5.279999927007E-02)); +#57840 = CARTESIAN_POINT('',(0.597033719664,-0.61,5.339999945297E-02)); +#57841 = CARTESIAN_POINT('',(0.597096608999,-0.61,5.459999945331E-02)); +#57842 = CARTESIAN_POINT('',(0.597128053657,-0.61,5.519999927076E-02)); +#57843 = CARTESIAN_POINT('',(0.597159498334,-0.61,5.579999945351E-02)); +#57844 = CARTESIAN_POINT('',(0.597222387669,-0.61,5.699999945386E-02)); +#57845 = CARTESIAN_POINT('',(0.597253832327,-0.61,5.759999927144E-02)); +#57846 = CARTESIAN_POINT('',(0.597285277005,-0.61,5.819999945406E-02)); +#57847 = CARTESIAN_POINT('',(0.59734816634,-0.61,5.93999994544E-02)); +#57848 = CARTESIAN_POINT('',(0.597379610998,-0.61,5.999999927213E-02)); +#57849 = CARTESIAN_POINT('',(0.597411055675,-0.61,6.059999945461E-02)); +#57850 = CARTESIAN_POINT('',(0.59747394501,-0.61,6.179999945495E-02)); +#57851 = CARTESIAN_POINT('',(0.597505389668,-0.61,6.239999927281E-02)); +#57852 = CARTESIAN_POINT('',(0.597536834345,-0.61,6.299999945515E-02)); +#57853 = CARTESIAN_POINT('',(0.59759972368,-0.61,6.419999945549E-02)); +#57854 = CARTESIAN_POINT('',(0.597631168338,-0.61,6.479999927349E-02)); +#57855 = CARTESIAN_POINT('',(0.597662613015,-0.61,6.539999945569E-02)); +#57856 = CARTESIAN_POINT('',(0.597725502351,-0.61,6.659999945604E-02)); +#57857 = CARTESIAN_POINT('',(0.597756947009,-0.61,6.719999927417E-02)); +#57858 = CARTESIAN_POINT('',(0.597788391686,-0.61,6.779999945624E-02)); +#57859 = CARTESIAN_POINT('',(0.597851281021,-0.61,6.899999945658E-02)); +#57860 = CARTESIAN_POINT('',(0.597882725679,-0.61,6.959999927485E-02)); +#57861 = CARTESIAN_POINT('',(0.597914170356,-0.61,7.019999945678E-02)); +#57862 = CARTESIAN_POINT('',(0.597977059691,-0.61,7.139999945712E-02)); +#57863 = CARTESIAN_POINT('',(0.598008504349,-0.61,7.199999927553E-02)); +#57864 = CARTESIAN_POINT('',(0.598039949026,-0.61,7.259999945732E-02)); +#57865 = CARTESIAN_POINT('',(0.598102838362,-0.61,7.379999945766E-02)); +#57866 = CARTESIAN_POINT('',(0.59813428302,-0.61,7.439999927621E-02)); +#57867 = CARTESIAN_POINT('',(0.598165727697,-0.61,7.499999945787E-02)); +#57868 = CARTESIAN_POINT('',(0.598228617032,-0.61,7.619999945821E-02)); +#57869 = CARTESIAN_POINT('',(0.59826006169,-0.61,7.679999927689E-02)); +#57870 = CARTESIAN_POINT('',(0.598291506367,-0.61,7.739999945841E-02)); +#57871 = CARTESIAN_POINT('',(0.598354395702,-0.61,7.859999945875E-02)); +#57872 = CARTESIAN_POINT('',(0.59838584036,-0.61,7.919999927757E-02)); +#57873 = CARTESIAN_POINT('',(0.598417285037,-0.61,7.979999945895E-02)); +#57874 = CARTESIAN_POINT('',(0.598480174372,-0.61,8.099999945929E-02)); +#57875 = CARTESIAN_POINT('',(0.598511619031,-0.61,8.159999927825E-02)); +#57876 = CARTESIAN_POINT('',(0.598543063708,-0.61,8.219999945949E-02)); +#57877 = CARTESIAN_POINT('',(0.598605953043,-0.61,8.339999945983E-02)); +#57878 = CARTESIAN_POINT('',(0.598637397701,-0.61,8.399999927893E-02)); +#57879 = CARTESIAN_POINT('',(0.598668842378,-0.61,8.459999946003E-02)); +#57880 = CARTESIAN_POINT('',(0.598731731713,-0.61,8.579999946037E-02)); +#57881 = CARTESIAN_POINT('',(0.598763176371,-0.61,8.63999992796E-02)); +#57882 = CARTESIAN_POINT('',(0.598794621048,-0.61,8.699999946057E-02)); +#57883 = CARTESIAN_POINT('',(0.598857510383,-0.61,8.819999946091E-02)); +#57884 = CARTESIAN_POINT('',(0.598888955041,-0.61,8.879999928028E-02)); +#57885 = CARTESIAN_POINT('',(0.598920399719,-0.61,8.939999946111E-02)); +#57886 = CARTESIAN_POINT('',(0.598983289054,-0.61,9.059999946145E-02)); +#57887 = CARTESIAN_POINT('',(0.599014733712,-0.61,9.119999928096E-02)); +#57888 = CARTESIAN_POINT('',(0.599046178389,-0.61,9.179999946165E-02)); +#57889 = CARTESIAN_POINT('',(0.599109067724,-0.61,9.299999946199E-02)); +#57890 = CARTESIAN_POINT('',(0.599140512382,-0.61,9.359999928163E-02)); +#57891 = CARTESIAN_POINT('',(0.599171957059,-0.61,9.419999946219E-02)); +#57892 = CARTESIAN_POINT('',(0.599234846394,-0.61,9.539999946253E-02)); +#57893 = CARTESIAN_POINT('',(0.599266291052,-0.61,9.599999928231E-02)); +#57894 = CARTESIAN_POINT('',(0.599297735729,-0.61,9.659999946273E-02)); +#57895 = CARTESIAN_POINT('',(0.599360625065,-0.61,9.779999946306E-02)); +#57896 = CARTESIAN_POINT('',(0.599392069723,-0.61,9.839999928298E-02)); +#57897 = CARTESIAN_POINT('',(0.5994235144,-0.61,9.899999946326E-02)); +#57898 = CARTESIAN_POINT('',(0.599486403735,-0.61,0.100199999464)); +#57899 = CARTESIAN_POINT('',(0.599517848393,-0.61,0.100799999284)); +#57900 = CARTESIAN_POINT('',(0.59954929307,-0.61,0.101399999464)); +#57901 = CARTESIAN_POINT('',(0.599612182405,-0.61,0.102599999464)); +#57902 = CARTESIAN_POINT('',(0.599643627063,-0.61,0.103199999284)); +#57903 = CARTESIAN_POINT('',(0.59967507174,-0.61,0.103799999464)); +#57904 = CARTESIAN_POINT('',(0.599737961076,-0.61,0.104999999465)); +#57905 = CARTESIAN_POINT('',(0.599769405734,-0.61,0.105599999285)); +#57906 = CARTESIAN_POINT('',(0.599800850411,-0.61,0.106199999465)); +#57907 = CARTESIAN_POINT('',(0.59987422128,-0.61,0.107599999045)); +#57908 = CARTESIAN_POINT('',(0.599916147486,-0.61,0.108399998725)); +#57909 = CARTESIAN_POINT('',(0.599958073726,-0.61,0.109199999043)); +#57910 = CARTESIAN_POINT('',(0.6,-0.61,0.11)); +#57911 = ORIENTED_EDGE('',*,*,#57912,.F.); +#57912 = EDGE_CURVE('',#57783,#57807,#57913,.T.); +#57913 = LINE('',#57914,#57915); +#57914 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57915 = VECTOR('',#57916,1.); +#57916 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57917 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57918,#57919) + ,(#57920,#57921 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57918 = CARTESIAN_POINT('',(0.595807377657,-0.795807377657,3.E-02)); +#57919 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57920 = CARTESIAN_POINT('',(0.595807377657,0.795807377657,3.E-02)); +#57921 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57922 = ADVANCED_FACE('',(#57923),#57962,.T.); +#57923 = FACE_BOUND('',#57924,.T.); +#57924 = EDGE_LOOP('',(#57925,#57926,#57932,#57933,#57939,#57940,#57941, + #57942,#57949,#57957)); +#57925 = ORIENTED_EDGE('',*,*,#57912,.T.); +#57926 = ORIENTED_EDGE('',*,*,#57927,.T.); +#57927 = EDGE_CURVE('',#57807,#57396,#57928,.T.); +#57928 = LINE('',#57929,#57930); +#57929 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57930 = VECTOR('',#57931,1.); +#57931 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57932 = ORIENTED_EDGE('',*,*,#57608,.T.); +#57933 = ORIENTED_EDGE('',*,*,#57934,.T.); +#57934 = EDGE_CURVE('',#57503,#56551,#57935,.T.); +#57935 = LINE('',#57936,#57937); +#57936 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57937 = VECTOR('',#57938,1.); +#57938 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57939 = ORIENTED_EDGE('',*,*,#56658,.T.); +#57940 = ORIENTED_EDGE('',*,*,#56510,.T.); +#57941 = ORIENTED_EDGE('',*,*,#56536,.T.); +#57942 = ORIENTED_EDGE('',*,*,#57943,.T.); +#57943 = EDGE_CURVE('',#56530,#57944,#57946,.T.); +#57944 = VERTEX_POINT('',#57945); +#57945 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#57946 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57947,#57948),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57947 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57948 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#57949 = ORIENTED_EDGE('',*,*,#57950,.F.); +#57950 = EDGE_CURVE('',#57951,#57944,#57953,.T.); +#57951 = VERTEX_POINT('',#57952); +#57952 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57953 = LINE('',#57954,#57955); +#57954 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57955 = VECTOR('',#57956,1.); +#57956 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#57957 = ORIENTED_EDGE('',*,*,#57958,.F.); +#57958 = EDGE_CURVE('',#57783,#57951,#57959,.T.); +#57959 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#57960,#57961),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#57960 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57961 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57962 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57963,#57964) + ,(#57965,#57966 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57963 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#57964 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#57965 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#57966 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#57967 = ADVANCED_FACE('',(#57968),#57994,.T.); +#57968 = FACE_BOUND('',#57969,.T.); +#57969 = EDGE_LOOP('',(#57970,#57980,#57986,#57987,#57988)); +#57970 = ORIENTED_EDGE('',*,*,#57971,.F.); +#57971 = EDGE_CURVE('',#57972,#57974,#57976,.T.); +#57972 = VERTEX_POINT('',#57973); +#57973 = CARTESIAN_POINT('',(0.8,0.11,0.)); +#57974 = VERTEX_POINT('',#57975); +#57975 = CARTESIAN_POINT('',(0.8,0.11,0.11)); +#57976 = LINE('',#57977,#57978); +#57977 = CARTESIAN_POINT('',(0.8,0.11,0.)); +#57978 = VECTOR('',#57979,1.); +#57979 = DIRECTION('',(0.,0.,1.)); +#57980 = ORIENTED_EDGE('',*,*,#57981,.F.); +#57981 = EDGE_CURVE('',#57342,#57972,#57982,.T.); +#57982 = LINE('',#57983,#57984); +#57983 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57984 = VECTOR('',#57985,1.); +#57985 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57986 = ORIENTED_EDGE('',*,*,#57349,.T.); +#57987 = ORIENTED_EDGE('',*,*,#56550,.T.); +#57988 = ORIENTED_EDGE('',*,*,#57989,.T.); +#57989 = EDGE_CURVE('',#56551,#57974,#57990,.T.); +#57990 = LINE('',#57991,#57992); +#57991 = CARTESIAN_POINT('',(0.595807377657,0.11,0.11)); +#57992 = VECTOR('',#57993,1.); +#57993 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57994 = PLANE('',#57995); +#57995 = AXIS2_PLACEMENT_3D('',#57996,#57997,#57998); +#57996 = CARTESIAN_POINT('',(0.595807377657,0.11,0.)); +#57997 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57998 = DIRECTION('',(0.,0.,1.)); +#57999 = ADVANCED_FACE('',(#58000),#58044,.T.); +#58000 = FACE_BOUND('',#58001,.T.); +#58001 = EDGE_LOOP('',(#58002,#58003,#58009,#58010,#58016,#58017,#58023, + #58024,#58031,#58039)); +#58002 = ORIENTED_EDGE('',*,*,#56786,.T.); +#58003 = ORIENTED_EDGE('',*,*,#58004,.T.); +#58004 = EDGE_CURVE('',#56681,#56849,#58005,.T.); +#58005 = LINE('',#58006,#58007); +#58006 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58007 = VECTOR('',#58008,1.); +#58008 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58009 = ORIENTED_EDGE('',*,*,#57061,.T.); +#58010 = ORIENTED_EDGE('',*,*,#58011,.T.); +#58011 = EDGE_CURVE('',#56956,#57107,#58012,.T.); +#58012 = LINE('',#58013,#58014); +#58013 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58014 = VECTOR('',#58015,1.); +#58015 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58016 = ORIENTED_EDGE('',*,*,#57319,.T.); +#58017 = ORIENTED_EDGE('',*,*,#58018,.T.); +#58018 = EDGE_CURVE('',#57214,#57623,#58019,.T.); +#58019 = LINE('',#58020,#58021); +#58020 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58021 = VECTOR('',#58022,1.); +#58022 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58023 = ORIENTED_EDGE('',*,*,#57736,.T.); +#58024 = ORIENTED_EDGE('',*,*,#58025,.T.); +#58025 = EDGE_CURVE('',#57730,#58026,#58028,.T.); +#58026 = VERTEX_POINT('',#58027); +#58027 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58028 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58029,#58030),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58029 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#58030 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58031 = ORIENTED_EDGE('',*,*,#58032,.F.); +#58032 = EDGE_CURVE('',#58033,#58026,#58035,.T.); +#58033 = VERTEX_POINT('',#58034); +#58034 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58035 = LINE('',#58036,#58037); +#58036 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58037 = VECTOR('',#58038,1.); +#58038 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58039 = ORIENTED_EDGE('',*,*,#58040,.F.); +#58040 = EDGE_CURVE('',#56673,#58033,#58041,.T.); +#58041 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58042,#58043),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58042 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58043 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58044 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58045,#58046) + ,(#58047,#58048 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.6),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58045 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58046 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58047 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#58048 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58049 = ADVANCED_FACE('',(#58050),#58076,.F.); +#58050 = FACE_BOUND('',#58051,.F.); +#58051 = EDGE_LOOP('',(#58052,#58062,#58068,#58069,#58070)); +#58052 = ORIENTED_EDGE('',*,*,#58053,.F.); +#58053 = EDGE_CURVE('',#58054,#58056,#58058,.T.); +#58054 = VERTEX_POINT('',#58055); +#58055 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58056 = VERTEX_POINT('',#58057); +#58057 = CARTESIAN_POINT('',(-0.8,0.61,0.11)); +#58058 = LINE('',#58059,#58060); +#58059 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58060 = VECTOR('',#58061,1.); +#58061 = DIRECTION('',(0.,0.,1.)); +#58062 = ORIENTED_EDGE('',*,*,#58063,.F.); +#58063 = EDGE_CURVE('',#56818,#58054,#58064,.T.); +#58064 = LINE('',#58065,#58066); +#58065 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#58066 = VECTOR('',#58067,1.); +#58067 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58068 = ORIENTED_EDGE('',*,*,#56817,.T.); +#58069 = ORIENTED_EDGE('',*,*,#56680,.T.); +#58070 = ORIENTED_EDGE('',*,*,#58071,.T.); +#58071 = EDGE_CURVE('',#56681,#58056,#58072,.T.); +#58072 = LINE('',#58073,#58074); +#58073 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.11)); +#58074 = VECTOR('',#58075,1.); +#58075 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58076 = PLANE('',#58077); +#58077 = AXIS2_PLACEMENT_3D('',#58078,#58079,#58080); +#58078 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#58079 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58080 = DIRECTION('',(0.,0.,1.)); +#58081 = ADVANCED_FACE('',(#58082),#58093,.T.); +#58082 = FACE_BOUND('',#58083,.T.); +#58083 = EDGE_LOOP('',(#58084,#58085,#58086,#58092)); +#58084 = ORIENTED_EDGE('',*,*,#56802,.T.); +#58085 = ORIENTED_EDGE('',*,*,#58040,.T.); +#58086 = ORIENTED_EDGE('',*,*,#58087,.F.); +#58087 = EDGE_CURVE('',#57944,#58033,#58088,.T.); +#58088 = LINE('',#58089,#58090); +#58089 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#58090 = VECTOR('',#58091,1.); +#58091 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#58092 = ORIENTED_EDGE('',*,*,#57943,.F.); +#58093 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58094,#58095) + ,(#58096,#58097 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58094 = CARTESIAN_POINT('',(0.6,0.8,0.11)); +#58095 = CARTESIAN_POINT('',(0.572747954773,0.772747954773,0.63)); +#58096 = CARTESIAN_POINT('',(-0.6,0.8,0.11)); +#58097 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58098 = ADVANCED_FACE('',(#58099),#58125,.T.); +#58099 = FACE_BOUND('',#58100,.T.); +#58100 = EDGE_LOOP('',(#58101,#58111,#58117,#58118,#58119)); +#58101 = ORIENTED_EDGE('',*,*,#58102,.F.); +#58102 = EDGE_CURVE('',#58103,#58105,#58107,.T.); +#58103 = VERTEX_POINT('',#58104); +#58104 = CARTESIAN_POINT('',(-0.8,0.39,0.)); +#58105 = VERTEX_POINT('',#58106); +#58106 = CARTESIAN_POINT('',(-0.8,0.39,0.11)); +#58107 = LINE('',#58108,#58109); +#58108 = CARTESIAN_POINT('',(-0.8,0.39,0.)); +#58109 = VECTOR('',#58110,1.); +#58110 = DIRECTION('',(0.,0.,1.)); +#58111 = ORIENTED_EDGE('',*,*,#58112,.F.); +#58112 = EDGE_CURVE('',#56826,#58103,#58113,.T.); +#58113 = LINE('',#58114,#58115); +#58114 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#58115 = VECTOR('',#58116,1.); +#58116 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58117 = ORIENTED_EDGE('',*,*,#56833,.T.); +#58118 = ORIENTED_EDGE('',*,*,#56848,.T.); +#58119 = ORIENTED_EDGE('',*,*,#58120,.T.); +#58120 = EDGE_CURVE('',#56849,#58105,#58121,.T.); +#58121 = LINE('',#58122,#58123); +#58122 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.11)); +#58123 = VECTOR('',#58124,1.); +#58124 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58125 = PLANE('',#58126); +#58126 = AXIS2_PLACEMENT_3D('',#58127,#58128,#58129); +#58127 = CARTESIAN_POINT('',(-0.595807377657,0.39,0.)); +#58128 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58129 = DIRECTION('',(0.,0.,1.)); +#58130 = ADVANCED_FACE('',(#58131),#58142,.F.); +#58131 = FACE_BOUND('',#58132,.F.); +#58132 = EDGE_LOOP('',(#58133,#58134,#58135,#58141)); +#58133 = ORIENTED_EDGE('',*,*,#56825,.F.); +#58134 = ORIENTED_EDGE('',*,*,#58063,.T.); +#58135 = ORIENTED_EDGE('',*,*,#58136,.T.); +#58136 = EDGE_CURVE('',#58054,#58103,#58137,.T.); +#58137 = LINE('',#58138,#58139); +#58138 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58139 = VECTOR('',#58140,1.); +#58140 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58141 = ORIENTED_EDGE('',*,*,#58112,.F.); +#58142 = PLANE('',#58143); +#58143 = AXIS2_PLACEMENT_3D('',#58144,#58145,#58146); +#58144 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.)); +#58145 = DIRECTION('',(0.,0.,1.)); +#58146 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58147 = ADVANCED_FACE('',(#58148),#58174,.F.); +#58148 = FACE_BOUND('',#58149,.F.); +#58149 = EDGE_LOOP('',(#58150,#58160,#58166,#58167,#58168)); +#58150 = ORIENTED_EDGE('',*,*,#58151,.F.); +#58151 = EDGE_CURVE('',#58152,#58154,#58156,.T.); +#58152 = VERTEX_POINT('',#58153); +#58153 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58154 = VERTEX_POINT('',#58155); +#58155 = CARTESIAN_POINT('',(-0.8,0.11,0.11)); +#58156 = LINE('',#58157,#58158); +#58157 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58158 = VECTOR('',#58159,1.); +#58159 = DIRECTION('',(0.,0.,1.)); +#58160 = ORIENTED_EDGE('',*,*,#58161,.F.); +#58161 = EDGE_CURVE('',#57076,#58152,#58162,.T.); +#58162 = LINE('',#58163,#58164); +#58163 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#58164 = VECTOR('',#58165,1.); +#58165 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58166 = ORIENTED_EDGE('',*,*,#57075,.T.); +#58167 = ORIENTED_EDGE('',*,*,#56955,.T.); +#58168 = ORIENTED_EDGE('',*,*,#58169,.T.); +#58169 = EDGE_CURVE('',#56956,#58154,#58170,.T.); +#58170 = LINE('',#58171,#58172); +#58171 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.11)); +#58172 = VECTOR('',#58173,1.); +#58173 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58174 = PLANE('',#58175); +#58175 = AXIS2_PLACEMENT_3D('',#58176,#58177,#58178); +#58176 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#58177 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58178 = DIRECTION('',(0.,0.,1.)); +#58179 = ADVANCED_FACE('',(#58180),#58206,.T.); +#58180 = FACE_BOUND('',#58181,.T.); +#58181 = EDGE_LOOP('',(#58182,#58192,#58198,#58199,#58200)); +#58182 = ORIENTED_EDGE('',*,*,#58183,.F.); +#58183 = EDGE_CURVE('',#58184,#58186,#58188,.T.); +#58184 = VERTEX_POINT('',#58185); +#58185 = CARTESIAN_POINT('',(-0.8,-0.11,0.)); +#58186 = VERTEX_POINT('',#58187); +#58187 = CARTESIAN_POINT('',(-0.8,-0.11,0.11)); +#58188 = LINE('',#58189,#58190); +#58189 = CARTESIAN_POINT('',(-0.8,-0.11,0.)); +#58190 = VECTOR('',#58191,1.); +#58191 = DIRECTION('',(0.,0.,1.)); +#58192 = ORIENTED_EDGE('',*,*,#58193,.F.); +#58193 = EDGE_CURVE('',#57084,#58184,#58194,.T.); +#58194 = LINE('',#58195,#58196); +#58195 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#58196 = VECTOR('',#58197,1.); +#58197 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58198 = ORIENTED_EDGE('',*,*,#57091,.T.); +#58199 = ORIENTED_EDGE('',*,*,#57106,.T.); +#58200 = ORIENTED_EDGE('',*,*,#58201,.T.); +#58201 = EDGE_CURVE('',#57107,#58186,#58202,.T.); +#58202 = LINE('',#58203,#58204); +#58203 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.11)); +#58204 = VECTOR('',#58205,1.); +#58205 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58206 = PLANE('',#58207); +#58207 = AXIS2_PLACEMENT_3D('',#58208,#58209,#58210); +#58208 = CARTESIAN_POINT('',(-0.595807377657,-0.11,0.)); +#58209 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58210 = DIRECTION('',(0.,0.,1.)); +#58211 = ADVANCED_FACE('',(#58212),#58223,.F.); +#58212 = FACE_BOUND('',#58213,.F.); +#58213 = EDGE_LOOP('',(#58214,#58215,#58216,#58222)); +#58214 = ORIENTED_EDGE('',*,*,#57083,.F.); +#58215 = ORIENTED_EDGE('',*,*,#58161,.T.); +#58216 = ORIENTED_EDGE('',*,*,#58217,.T.); +#58217 = EDGE_CURVE('',#58152,#58184,#58218,.T.); +#58218 = LINE('',#58219,#58220); +#58219 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58220 = VECTOR('',#58221,1.); +#58221 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58222 = ORIENTED_EDGE('',*,*,#58193,.F.); +#58223 = PLANE('',#58224); +#58224 = AXIS2_PLACEMENT_3D('',#58225,#58226,#58227); +#58225 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.)); +#58226 = DIRECTION('',(0.,0.,1.)); +#58227 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58228 = ADVANCED_FACE('',(#58229),#58255,.F.); +#58229 = FACE_BOUND('',#58230,.F.); +#58230 = EDGE_LOOP('',(#58231,#58241,#58247,#58248,#58249)); +#58231 = ORIENTED_EDGE('',*,*,#58232,.F.); +#58232 = EDGE_CURVE('',#58233,#58235,#58237,.T.); +#58233 = VERTEX_POINT('',#58234); +#58234 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58235 = VERTEX_POINT('',#58236); +#58236 = CARTESIAN_POINT('',(-0.8,-0.39,0.11)); +#58237 = LINE('',#58238,#58239); +#58238 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58239 = VECTOR('',#58240,1.); +#58240 = DIRECTION('',(0.,0.,1.)); +#58241 = ORIENTED_EDGE('',*,*,#58242,.F.); +#58242 = EDGE_CURVE('',#57365,#58233,#58243,.T.); +#58243 = LINE('',#58244,#58245); +#58244 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#58245 = VECTOR('',#58246,1.); +#58246 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58247 = ORIENTED_EDGE('',*,*,#57364,.T.); +#58248 = ORIENTED_EDGE('',*,*,#57213,.T.); +#58249 = ORIENTED_EDGE('',*,*,#58250,.T.); +#58250 = EDGE_CURVE('',#57214,#58235,#58251,.T.); +#58251 = LINE('',#58252,#58253); +#58252 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.11)); +#58253 = VECTOR('',#58254,1.); +#58254 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58255 = PLANE('',#58256); +#58256 = AXIS2_PLACEMENT_3D('',#58257,#58258,#58259); +#58257 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#58258 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58259 = DIRECTION('',(0.,0.,1.)); +#58260 = ADVANCED_FACE('',(#58261),#58287,.F.); +#58261 = FACE_BOUND('',#58262,.F.); +#58262 = EDGE_LOOP('',(#58263,#58273,#58279,#58280,#58281)); +#58263 = ORIENTED_EDGE('',*,*,#58264,.F.); +#58264 = EDGE_CURVE('',#58265,#58267,#58269,.T.); +#58265 = VERTEX_POINT('',#58266); +#58266 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58267 = VERTEX_POINT('',#58268); +#58268 = CARTESIAN_POINT('',(0.8,-0.11,0.11)); +#58269 = LINE('',#58270,#58271); +#58270 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58271 = VECTOR('',#58272,1.); +#58272 = DIRECTION('',(0.,0.,1.)); +#58273 = ORIENTED_EDGE('',*,*,#58274,.F.); +#58274 = EDGE_CURVE('',#57334,#58265,#58275,.T.); +#58275 = LINE('',#58276,#58277); +#58276 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#58277 = VECTOR('',#58278,1.); +#58278 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58279 = ORIENTED_EDGE('',*,*,#57333,.T.); +#58280 = ORIENTED_EDGE('',*,*,#57502,.T.); +#58281 = ORIENTED_EDGE('',*,*,#58282,.T.); +#58282 = EDGE_CURVE('',#57503,#58267,#58283,.T.); +#58283 = LINE('',#58284,#58285); +#58284 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.11)); +#58285 = VECTOR('',#58286,1.); +#58286 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58287 = PLANE('',#58288); +#58288 = AXIS2_PLACEMENT_3D('',#58289,#58290,#58291); +#58289 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#58290 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58291 = DIRECTION('',(0.,0.,1.)); +#58292 = ADVANCED_FACE('',(#58293),#58304,.F.); +#58293 = FACE_BOUND('',#58294,.F.); +#58294 = EDGE_LOOP('',(#58295,#58296,#58297,#58303)); +#58295 = ORIENTED_EDGE('',*,*,#57341,.F.); +#58296 = ORIENTED_EDGE('',*,*,#58274,.T.); +#58297 = ORIENTED_EDGE('',*,*,#58298,.T.); +#58298 = EDGE_CURVE('',#58265,#57972,#58299,.T.); +#58299 = LINE('',#58300,#58301); +#58300 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58301 = VECTOR('',#58302,1.); +#58302 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58303 = ORIENTED_EDGE('',*,*,#57981,.F.); +#58304 = PLANE('',#58305); +#58305 = AXIS2_PLACEMENT_3D('',#58306,#58307,#58308); +#58306 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.)); +#58307 = DIRECTION('',(0.,0.,1.)); +#58308 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58309 = ADVANCED_FACE('',(#58310),#58336,.T.); +#58310 = FACE_BOUND('',#58311,.T.); +#58311 = EDGE_LOOP('',(#58312,#58322,#58328,#58329,#58330)); +#58312 = ORIENTED_EDGE('',*,*,#58313,.F.); +#58313 = EDGE_CURVE('',#58314,#58316,#58318,.T.); +#58314 = VERTEX_POINT('',#58315); +#58315 = CARTESIAN_POINT('',(-0.8,-0.61,0.)); +#58316 = VERTEX_POINT('',#58317); +#58317 = CARTESIAN_POINT('',(-0.8,-0.61,0.11)); +#58318 = LINE('',#58319,#58320); +#58319 = CARTESIAN_POINT('',(-0.8,-0.61,0.)); +#58320 = VECTOR('',#58321,1.); +#58321 = DIRECTION('',(0.,0.,1.)); +#58322 = ORIENTED_EDGE('',*,*,#58323,.F.); +#58323 = EDGE_CURVE('',#57373,#58314,#58324,.T.); +#58324 = LINE('',#58325,#58326); +#58325 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#58326 = VECTOR('',#58327,1.); +#58327 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58328 = ORIENTED_EDGE('',*,*,#57380,.T.); +#58329 = ORIENTED_EDGE('',*,*,#57622,.T.); +#58330 = ORIENTED_EDGE('',*,*,#58331,.T.); +#58331 = EDGE_CURVE('',#57623,#58316,#58332,.T.); +#58332 = LINE('',#58333,#58334); +#58333 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.11)); +#58334 = VECTOR('',#58335,1.); +#58335 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58336 = PLANE('',#58337); +#58337 = AXIS2_PLACEMENT_3D('',#58338,#58339,#58340); +#58338 = CARTESIAN_POINT('',(-0.595807377657,-0.61,0.)); +#58339 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58340 = DIRECTION('',(0.,0.,1.)); +#58341 = ADVANCED_FACE('',(#58342),#58353,.F.); +#58342 = FACE_BOUND('',#58343,.F.); +#58343 = EDGE_LOOP('',(#58344,#58345,#58346,#58352)); +#58344 = ORIENTED_EDGE('',*,*,#57372,.F.); +#58345 = ORIENTED_EDGE('',*,*,#58242,.T.); +#58346 = ORIENTED_EDGE('',*,*,#58347,.T.); +#58347 = EDGE_CURVE('',#58233,#58314,#58348,.T.); +#58348 = LINE('',#58349,#58350); +#58349 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58350 = VECTOR('',#58351,1.); +#58351 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58352 = ORIENTED_EDGE('',*,*,#58323,.F.); +#58353 = PLANE('',#58354); +#58354 = AXIS2_PLACEMENT_3D('',#58355,#58356,#58357); +#58355 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.)); +#58356 = DIRECTION('',(0.,0.,1.)); +#58357 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58358 = ADVANCED_FACE('',(#58359),#58385,.T.); +#58359 = FACE_BOUND('',#58360,.T.); +#58360 = EDGE_LOOP('',(#58361,#58371,#58377,#58378,#58379)); +#58361 = ORIENTED_EDGE('',*,*,#58362,.F.); +#58362 = EDGE_CURVE('',#58363,#58365,#58367,.T.); +#58363 = VERTEX_POINT('',#58364); +#58364 = CARTESIAN_POINT('',(0.8,-0.39,0.)); +#58365 = VERTEX_POINT('',#58366); +#58366 = CARTESIAN_POINT('',(0.8,-0.39,0.11)); +#58367 = LINE('',#58368,#58369); +#58368 = CARTESIAN_POINT('',(0.8,-0.39,0.)); +#58369 = VECTOR('',#58370,1.); +#58370 = DIRECTION('',(0.,0.,1.)); +#58371 = ORIENTED_EDGE('',*,*,#58372,.F.); +#58372 = EDGE_CURVE('',#57759,#58363,#58373,.T.); +#58373 = LINE('',#58374,#58375); +#58374 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#58375 = VECTOR('',#58376,1.); +#58376 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58377 = ORIENTED_EDGE('',*,*,#57766,.T.); +#58378 = ORIENTED_EDGE('',*,*,#57395,.T.); +#58379 = ORIENTED_EDGE('',*,*,#58380,.T.); +#58380 = EDGE_CURVE('',#57396,#58365,#58381,.T.); +#58381 = LINE('',#58382,#58383); +#58382 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.11)); +#58383 = VECTOR('',#58384,1.); +#58384 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58385 = PLANE('',#58386); +#58386 = AXIS2_PLACEMENT_3D('',#58387,#58388,#58389); +#58387 = CARTESIAN_POINT('',(0.595807377657,-0.39,0.)); +#58388 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58389 = DIRECTION('',(0.,0.,1.)); +#58390 = ADVANCED_FACE('',(#58391),#58417,.F.); +#58391 = FACE_BOUND('',#58392,.F.); +#58392 = EDGE_LOOP('',(#58393,#58403,#58409,#58410,#58411)); +#58393 = ORIENTED_EDGE('',*,*,#58394,.F.); +#58394 = EDGE_CURVE('',#58395,#58397,#58399,.T.); +#58395 = VERTEX_POINT('',#58396); +#58396 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58397 = VERTEX_POINT('',#58398); +#58398 = CARTESIAN_POINT('',(0.8,-0.61,0.11)); +#58399 = LINE('',#58400,#58401); +#58400 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58401 = VECTOR('',#58402,1.); +#58402 = DIRECTION('',(0.,0.,1.)); +#58403 = ORIENTED_EDGE('',*,*,#58404,.F.); +#58404 = EDGE_CURVE('',#57751,#58395,#58405,.T.); +#58405 = LINE('',#58406,#58407); +#58406 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#58407 = VECTOR('',#58408,1.); +#58408 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58409 = ORIENTED_EDGE('',*,*,#57750,.T.); +#58410 = ORIENTED_EDGE('',*,*,#57806,.T.); +#58411 = ORIENTED_EDGE('',*,*,#58412,.T.); +#58412 = EDGE_CURVE('',#57807,#58397,#58413,.T.); +#58413 = LINE('',#58414,#58415); +#58414 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.11)); +#58415 = VECTOR('',#58416,1.); +#58416 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58417 = PLANE('',#58418); +#58418 = AXIS2_PLACEMENT_3D('',#58419,#58420,#58421); +#58419 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#58420 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58421 = DIRECTION('',(0.,0.,1.)); +#58422 = ADVANCED_FACE('',(#58423),#58434,.F.); +#58423 = FACE_BOUND('',#58424,.F.); +#58424 = EDGE_LOOP('',(#58425,#58426,#58427,#58433)); +#58425 = ORIENTED_EDGE('',*,*,#57758,.F.); +#58426 = ORIENTED_EDGE('',*,*,#58404,.T.); +#58427 = ORIENTED_EDGE('',*,*,#58428,.T.); +#58428 = EDGE_CURVE('',#58395,#58363,#58429,.T.); +#58429 = LINE('',#58430,#58431); +#58430 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58431 = VECTOR('',#58432,1.); +#58432 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58433 = ORIENTED_EDGE('',*,*,#58372,.F.); +#58434 = PLANE('',#58435); +#58435 = AXIS2_PLACEMENT_3D('',#58436,#58437,#58438); +#58436 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.)); +#58437 = DIRECTION('',(0.,0.,1.)); +#58438 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58439 = ADVANCED_FACE('',(#58440),#58451,.T.); +#58440 = FACE_BOUND('',#58441,.T.); +#58441 = EDGE_LOOP('',(#58442,#58443,#58444,#58450)); +#58442 = ORIENTED_EDGE('',*,*,#57789,.T.); +#58443 = ORIENTED_EDGE('',*,*,#57958,.T.); +#58444 = ORIENTED_EDGE('',*,*,#58445,.F.); +#58445 = EDGE_CURVE('',#58026,#57951,#58446,.T.); +#58446 = LINE('',#58447,#58448); +#58447 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58448 = VECTOR('',#58449,1.); +#58449 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#58450 = ORIENTED_EDGE('',*,*,#58025,.F.); +#58451 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58452,#58453) + ,(#58454,#58455 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.2),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58452 = CARTESIAN_POINT('',(-0.6,-0.8,0.11)); +#58453 = CARTESIAN_POINT('',(-0.572747954773,-0.772747954773,0.63)); +#58454 = CARTESIAN_POINT('',(0.6,-0.8,0.11)); +#58455 = CARTESIAN_POINT('',(0.572747954773,-0.772747954773,0.63)); +#58456 = ADVANCED_FACE('',(#58457),#58468,.T.); +#58457 = FACE_BOUND('',#58458,.T.); +#58458 = EDGE_LOOP('',(#58459,#58460,#58461,#58467)); +#58459 = ORIENTED_EDGE('',*,*,#57927,.F.); +#58460 = ORIENTED_EDGE('',*,*,#58412,.T.); +#58461 = ORIENTED_EDGE('',*,*,#58462,.T.); +#58462 = EDGE_CURVE('',#58397,#58365,#58463,.T.); +#58463 = LINE('',#58464,#58465); +#58464 = CARTESIAN_POINT('',(0.8,-0.61,0.11)); +#58465 = VECTOR('',#58466,1.); +#58466 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58467 = ORIENTED_EDGE('',*,*,#58380,.F.); +#58468 = PLANE('',#58469); +#58469 = AXIS2_PLACEMENT_3D('',#58470,#58471,#58472); +#58470 = CARTESIAN_POINT('',(0.595807377657,-0.61,0.11)); +#58471 = DIRECTION('',(0.,0.,1.)); +#58472 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58473 = ADVANCED_FACE('',(#58474,#58480),#58491,.F.); +#58474 = FACE_BOUND('',#58475,.F.); +#58475 = EDGE_LOOP('',(#58476,#58477,#58478,#58479)); +#58476 = ORIENTED_EDGE('',*,*,#58032,.F.); +#58477 = ORIENTED_EDGE('',*,*,#58087,.F.); +#58478 = ORIENTED_EDGE('',*,*,#57950,.F.); +#58479 = ORIENTED_EDGE('',*,*,#58445,.F.); +#58480 = FACE_BOUND('',#58481,.F.); +#58481 = EDGE_LOOP('',(#58482)); +#58482 = ORIENTED_EDGE('',*,*,#58483,.T.); +#58483 = EDGE_CURVE('',#58484,#58484,#58486,.T.); +#58484 = VERTEX_POINT('',#58485); +#58485 = CARTESIAN_POINT('',(-0.222747954773,0.297747954773,0.63)); +#58486 = CIRCLE('',#58487,0.125); +#58487 = AXIS2_PLACEMENT_3D('',#58488,#58489,#58490); +#58488 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.63)); +#58489 = DIRECTION('',(-0.,0.,1.)); +#58490 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58491 = PLANE('',#58492); +#58492 = AXIS2_PLACEMENT_3D('',#58493,#58494,#58495); +#58493 = CARTESIAN_POINT('',(-0.572747954773,0.772747954773,0.63)); +#58494 = DIRECTION('',(0.,0.,-1.)); +#58495 = DIRECTION('',(0.595457154844,-0.803387065333,0.)); +#58496 = ADVANCED_FACE('',(#58497),#58508,.T.); +#58497 = FACE_BOUND('',#58498,.T.); +#58498 = EDGE_LOOP('',(#58499,#58500,#58501,#58507)); +#58499 = ORIENTED_EDGE('',*,*,#57934,.F.); +#58500 = ORIENTED_EDGE('',*,*,#58282,.T.); +#58501 = ORIENTED_EDGE('',*,*,#58502,.T.); +#58502 = EDGE_CURVE('',#58267,#57974,#58503,.T.); +#58503 = LINE('',#58504,#58505); +#58504 = CARTESIAN_POINT('',(0.8,-0.11,0.11)); +#58505 = VECTOR('',#58506,1.); +#58506 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58507 = ORIENTED_EDGE('',*,*,#57989,.F.); +#58508 = PLANE('',#58509); +#58509 = AXIS2_PLACEMENT_3D('',#58510,#58511,#58512); +#58510 = CARTESIAN_POINT('',(0.595807377657,-0.11,0.11)); +#58511 = DIRECTION('',(0.,0.,1.)); +#58512 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58513 = ADVANCED_FACE('',(#58514),#58520,.T.); +#58514 = FACE_BOUND('',#58515,.T.); +#58515 = EDGE_LOOP('',(#58516,#58517,#58518,#58519)); +#58516 = ORIENTED_EDGE('',*,*,#58264,.F.); +#58517 = ORIENTED_EDGE('',*,*,#58298,.T.); +#58518 = ORIENTED_EDGE('',*,*,#57971,.T.); +#58519 = ORIENTED_EDGE('',*,*,#58502,.F.); +#58520 = PLANE('',#58521); +#58521 = AXIS2_PLACEMENT_3D('',#58522,#58523,#58524); +#58522 = CARTESIAN_POINT('',(0.8,-0.11,0.)); +#58523 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58524 = DIRECTION('',(0.,-0.,1.)); +#58525 = ADVANCED_FACE('',(#58526),#58537,.T.); +#58526 = FACE_BOUND('',#58527,.T.); +#58527 = EDGE_LOOP('',(#58528,#58529,#58530,#58536)); +#58528 = ORIENTED_EDGE('',*,*,#58004,.F.); +#58529 = ORIENTED_EDGE('',*,*,#58071,.T.); +#58530 = ORIENTED_EDGE('',*,*,#58531,.T.); +#58531 = EDGE_CURVE('',#58056,#58105,#58532,.T.); +#58532 = LINE('',#58533,#58534); +#58533 = CARTESIAN_POINT('',(-0.8,0.61,0.11)); +#58534 = VECTOR('',#58535,1.); +#58535 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58536 = ORIENTED_EDGE('',*,*,#58120,.F.); +#58537 = PLANE('',#58538); +#58538 = AXIS2_PLACEMENT_3D('',#58539,#58540,#58541); +#58539 = CARTESIAN_POINT('',(-0.595807377657,0.61,0.11)); +#58540 = DIRECTION('',(0.,0.,1.)); +#58541 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58542 = ADVANCED_FACE('',(#58543),#58554,.T.); +#58543 = FACE_BOUND('',#58544,.T.); +#58544 = EDGE_LOOP('',(#58545,#58546,#58547,#58553)); +#58545 = ORIENTED_EDGE('',*,*,#58011,.F.); +#58546 = ORIENTED_EDGE('',*,*,#58169,.T.); +#58547 = ORIENTED_EDGE('',*,*,#58548,.T.); +#58548 = EDGE_CURVE('',#58154,#58186,#58549,.T.); +#58549 = LINE('',#58550,#58551); +#58550 = CARTESIAN_POINT('',(-0.8,0.11,0.11)); +#58551 = VECTOR('',#58552,1.); +#58552 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58553 = ORIENTED_EDGE('',*,*,#58201,.F.); +#58554 = PLANE('',#58555); +#58555 = AXIS2_PLACEMENT_3D('',#58556,#58557,#58558); +#58556 = CARTESIAN_POINT('',(-0.595807377657,0.11,0.11)); +#58557 = DIRECTION('',(0.,0.,1.)); +#58558 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58559 = ADVANCED_FACE('',(#58560),#58571,.T.); +#58560 = FACE_BOUND('',#58561,.T.); +#58561 = EDGE_LOOP('',(#58562,#58563,#58564,#58570)); +#58562 = ORIENTED_EDGE('',*,*,#58018,.F.); +#58563 = ORIENTED_EDGE('',*,*,#58250,.T.); +#58564 = ORIENTED_EDGE('',*,*,#58565,.T.); +#58565 = EDGE_CURVE('',#58235,#58316,#58566,.T.); +#58566 = LINE('',#58567,#58568); +#58567 = CARTESIAN_POINT('',(-0.8,-0.39,0.11)); +#58568 = VECTOR('',#58569,1.); +#58569 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58570 = ORIENTED_EDGE('',*,*,#58331,.F.); +#58571 = PLANE('',#58572); +#58572 = AXIS2_PLACEMENT_3D('',#58573,#58574,#58575); +#58573 = CARTESIAN_POINT('',(-0.595807377657,-0.39,0.11)); +#58574 = DIRECTION('',(0.,0.,1.)); +#58575 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58576 = ADVANCED_FACE('',(#58577),#58583,.T.); +#58577 = FACE_BOUND('',#58578,.T.); +#58578 = EDGE_LOOP('',(#58579,#58580,#58581,#58582)); +#58579 = ORIENTED_EDGE('',*,*,#58053,.F.); +#58580 = ORIENTED_EDGE('',*,*,#58136,.T.); +#58581 = ORIENTED_EDGE('',*,*,#58102,.T.); +#58582 = ORIENTED_EDGE('',*,*,#58531,.F.); +#58583 = PLANE('',#58584); +#58584 = AXIS2_PLACEMENT_3D('',#58585,#58586,#58587); +#58585 = CARTESIAN_POINT('',(-0.8,0.61,0.)); +#58586 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58587 = DIRECTION('',(0.,0.,1.)); +#58588 = ADVANCED_FACE('',(#58589),#58595,.T.); +#58589 = FACE_BOUND('',#58590,.T.); +#58590 = EDGE_LOOP('',(#58591,#58592,#58593,#58594)); +#58591 = ORIENTED_EDGE('',*,*,#58151,.F.); +#58592 = ORIENTED_EDGE('',*,*,#58217,.T.); +#58593 = ORIENTED_EDGE('',*,*,#58183,.T.); +#58594 = ORIENTED_EDGE('',*,*,#58548,.F.); +#58595 = PLANE('',#58596); +#58596 = AXIS2_PLACEMENT_3D('',#58597,#58598,#58599); +#58597 = CARTESIAN_POINT('',(-0.8,0.11,0.)); +#58598 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58599 = DIRECTION('',(0.,0.,1.)); +#58600 = ADVANCED_FACE('',(#58601),#58607,.T.); +#58601 = FACE_BOUND('',#58602,.T.); +#58602 = EDGE_LOOP('',(#58603,#58604,#58605,#58606)); +#58603 = ORIENTED_EDGE('',*,*,#58232,.F.); +#58604 = ORIENTED_EDGE('',*,*,#58347,.T.); +#58605 = ORIENTED_EDGE('',*,*,#58313,.T.); +#58606 = ORIENTED_EDGE('',*,*,#58565,.F.); +#58607 = PLANE('',#58608); +#58608 = AXIS2_PLACEMENT_3D('',#58609,#58610,#58611); +#58609 = CARTESIAN_POINT('',(-0.8,-0.39,0.)); +#58610 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58611 = DIRECTION('',(0.,0.,1.)); +#58612 = ADVANCED_FACE('',(#58613),#58619,.T.); +#58613 = FACE_BOUND('',#58614,.T.); +#58614 = EDGE_LOOP('',(#58615,#58616,#58617,#58618)); +#58615 = ORIENTED_EDGE('',*,*,#58394,.F.); +#58616 = ORIENTED_EDGE('',*,*,#58428,.T.); +#58617 = ORIENTED_EDGE('',*,*,#58362,.T.); +#58618 = ORIENTED_EDGE('',*,*,#58462,.F.); +#58619 = PLANE('',#58620); +#58620 = AXIS2_PLACEMENT_3D('',#58621,#58622,#58623); +#58621 = CARTESIAN_POINT('',(0.8,-0.61,0.)); +#58622 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58623 = DIRECTION('',(0.,-0.,1.)); +#58624 = ADVANCED_FACE('',(#58625),#58644,.F.); +#58625 = FACE_BOUND('',#58626,.F.); +#58626 = EDGE_LOOP('',(#58627,#58636,#58642,#58643)); +#58627 = ORIENTED_EDGE('',*,*,#58628,.T.); +#58628 = EDGE_CURVE('',#58629,#58629,#58631,.T.); +#58629 = VERTEX_POINT('',#58630); +#58630 = CARTESIAN_POINT('',(-0.222747954773,0.297747954773,0.6)); +#58631 = CIRCLE('',#58632,0.125); +#58632 = AXIS2_PLACEMENT_3D('',#58633,#58634,#58635); +#58633 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.6)); +#58634 = DIRECTION('',(-0.,0.,1.)); +#58635 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58636 = ORIENTED_EDGE('',*,*,#58637,.F.); +#58637 = EDGE_CURVE('',#58484,#58629,#58638,.T.); +#58638 = LINE('',#58639,#58640); +#58639 = CARTESIAN_POINT('',(-0.222747954773,0.297747954773,0.63)); +#58640 = VECTOR('',#58641,1.); +#58641 = DIRECTION('',(0.,-0.,-1.)); +#58642 = ORIENTED_EDGE('',*,*,#58483,.F.); +#58643 = ORIENTED_EDGE('',*,*,#58637,.T.); +#58644 = CYLINDRICAL_SURFACE('',#58645,0.125); +#58645 = AXIS2_PLACEMENT_3D('',#58646,#58647,#58648); +#58646 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.63)); +#58647 = DIRECTION('',(-0.,0.,-1.)); +#58648 = DIRECTION('',(2.22044604925E-16,-1.,-0.)); +#58649 = ADVANCED_FACE('',(#58650),#58653,.T.); +#58650 = FACE_BOUND('',#58651,.T.); +#58651 = EDGE_LOOP('',(#58652)); +#58652 = ORIENTED_EDGE('',*,*,#58628,.T.); +#58653 = PLANE('',#58654); +#58654 = AXIS2_PLACEMENT_3D('',#58655,#58656,#58657); +#58655 = CARTESIAN_POINT('',(-0.222747954773,0.422747954773,0.6)); +#58656 = DIRECTION('',(0.,0.,1.)); +#58657 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#58658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#58662)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#58659,#58660,#58661)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#58659 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#58660 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#58661 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#58662 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#58659, + 'distance_accuracy_value','confusion accuracy'); +#58663 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58664,#58666); +#58664 = ( REPRESENTATION_RELATIONSHIP('','',#56028,#56005) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58665) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58665 = ITEM_DEFINED_TRANSFORMATION('','',#11,#56006); +#58666 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58667); +#58667 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('60','=>[0:1:1:35]','',#56000, + #56023,$); +#58668 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#56025)); +#58669 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58670,#58672); +#58670 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58671) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58671 = ITEM_DEFINED_TRANSFORMATION('','',#11,#191); +#58672 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58673); +#58673 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('62','RB3','',#5,#523,$); +#58674 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58675,#58677); +#58675 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58676) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58676 = ITEM_DEFINED_TRANSFORMATION('','',#11,#195); +#58677 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58678); +#58678 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('63','C9','',#5,#14742,$); +#58679 = SHAPE_DEFINITION_REPRESENTATION(#58680,#58686); +#58680 = PRODUCT_DEFINITION_SHAPE('','',#58681); +#58681 = PRODUCT_DEFINITION('design','',#58682,#58685); +#58682 = PRODUCT_DEFINITION_FORMATION('','',#58683); +#58683 = PRODUCT('SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS', + 'SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS','',(#58684)); +#58684 = PRODUCT_CONTEXT('',#2,'mechanical'); +#58685 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#58686 = SHAPE_REPRESENTATION('',(#11,#58687),#58691); +#58687 = AXIS2_PLACEMENT_3D('',#58688,#58689,#58690); +#58688 = CARTESIAN_POINT('',(0.,0.,0.)); +#58689 = DIRECTION('',(0.,0.,1.)); +#58690 = DIRECTION('',(1.,0.,-0.)); +#58691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#58695)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#58692,#58693,#58694)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#58692 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#58693 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#58694 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#58695 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-04),#58692, + 'distance_accuracy_value','confusion accuracy'); +#58696 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58697,#58699); +#58697 = ( REPRESENTATION_RELATIONSHIP('','',#58686,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58698) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58698 = ITEM_DEFINED_TRANSFORMATION('','',#11,#199); +#58699 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58700); +#58700 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('65','SW4G','',#5,#58681,$); +#58701 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#58683)); +#58702 = SHAPE_DEFINITION_REPRESENTATION(#58703,#58709); +#58703 = PRODUCT_DEFINITION_SHAPE('','',#58704); +#58704 = PRODUCT_DEFINITION('design','',#58705,#58708); +#58705 = PRODUCT_DEFINITION_FORMATION('','',#58706); +#58706 = PRODUCT('PTS636Sx25SMTRLFS','PTS636Sx25SMTRLFS','',(#58707)); +#58707 = PRODUCT_CONTEXT('',#2,'mechanical'); +#58708 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#58709 = SHAPE_REPRESENTATION('',(#11,#58710,#60396,#64452,#64804,#65258 + ),#65610); +#58710 = MANIFOLD_SOLID_BREP('',#58711); +#58711 = CLOSED_SHELL('',(#58712,#58988,#59019,#59044,#59121,#59145, + #59170,#59195,#59251,#59275,#59300,#59370,#59401,#59432,#59457, + #59482,#59506,#59530,#59555,#59580,#59604,#59628,#59653,#59684, + #59740,#59765,#59783,#59807,#59832,#59856,#59873,#59887,#59912, + #59952,#59976,#60016,#60034,#60051,#60076,#60100,#60161,#60173, + #60190,#60207,#60233,#60257,#60288,#60306,#60320,#60334,#60348, + #60360,#60372,#60384)); +#58712 = ADVANCED_FACE('',(#58713),#58983,.T.); +#58713 = FACE_BOUND('',#58714,.T.); +#58714 = EDGE_LOOP('',(#58715,#58725,#58734,#58742,#58751,#58759,#58767, + #58775,#58784,#58792,#58801,#58809,#58817,#58826,#58834,#58843, + #58851,#58859,#58868,#58876,#58885,#58893,#58901,#58909,#58918, + #58926,#58935,#58943,#58951,#58960,#58968,#58977)); +#58715 = ORIENTED_EDGE('',*,*,#58716,.T.); +#58716 = EDGE_CURVE('',#58717,#58719,#58721,.T.); +#58717 = VERTEX_POINT('',#58718); +#58718 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#58719 = VERTEX_POINT('',#58720); +#58720 = CARTESIAN_POINT('',(-2.85,1.425,1.2)); +#58721 = LINE('',#58722,#58723); +#58722 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#58723 = VECTOR('',#58724,1.); +#58724 = DIRECTION('',(1.,0.,0.)); +#58725 = ORIENTED_EDGE('',*,*,#58726,.T.); +#58726 = EDGE_CURVE('',#58719,#58727,#58729,.T.); +#58727 = VERTEX_POINT('',#58728); +#58728 = CARTESIAN_POINT('',(-2.725,1.3,1.2)); +#58729 = CIRCLE('',#58730,0.125); +#58730 = AXIS2_PLACEMENT_3D('',#58731,#58732,#58733); +#58731 = CARTESIAN_POINT('',(-2.85,1.3,1.2)); +#58732 = DIRECTION('',(-0.,-0.,-1.)); +#58733 = DIRECTION('',(0.,-1.,0.)); +#58734 = ORIENTED_EDGE('',*,*,#58735,.T.); +#58735 = EDGE_CURVE('',#58727,#58736,#58738,.T.); +#58736 = VERTEX_POINT('',#58737); +#58737 = CARTESIAN_POINT('',(-2.725,0.75,1.2)); +#58738 = LINE('',#58739,#58740); +#58739 = CARTESIAN_POINT('',(-2.725,1.425,1.2)); +#58740 = VECTOR('',#58741,1.); +#58741 = DIRECTION('',(-0.,-1.,-0.)); +#58742 = ORIENTED_EDGE('',*,*,#58743,.T.); +#58743 = EDGE_CURVE('',#58736,#58744,#58746,.T.); +#58744 = VERTEX_POINT('',#58745); +#58745 = CARTESIAN_POINT('',(-2.85,0.625,1.2)); +#58746 = CIRCLE('',#58747,0.125); +#58747 = AXIS2_PLACEMENT_3D('',#58748,#58749,#58750); +#58748 = CARTESIAN_POINT('',(-2.85,0.75,1.2)); +#58749 = DIRECTION('',(-0.,-0.,-1.)); +#58750 = DIRECTION('',(0.,-1.,0.)); +#58751 = ORIENTED_EDGE('',*,*,#58752,.T.); +#58752 = EDGE_CURVE('',#58744,#58753,#58755,.T.); +#58753 = VERTEX_POINT('',#58754); +#58754 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#58755 = LINE('',#58756,#58757); +#58756 = CARTESIAN_POINT('',(-2.725,0.625,1.2)); +#58757 = VECTOR('',#58758,1.); +#58758 = DIRECTION('',(-1.,-0.,-0.)); +#58759 = ORIENTED_EDGE('',*,*,#58760,.F.); +#58760 = EDGE_CURVE('',#58761,#58753,#58763,.T.); +#58761 = VERTEX_POINT('',#58762); +#58762 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#58763 = LINE('',#58764,#58765); +#58764 = CARTESIAN_POINT('',(-3.05,-1.65,1.2)); +#58765 = VECTOR('',#58766,1.); +#58766 = DIRECTION('',(0.,1.,0.)); +#58767 = ORIENTED_EDGE('',*,*,#58768,.F.); +#58768 = EDGE_CURVE('',#58769,#58761,#58771,.T.); +#58769 = VERTEX_POINT('',#58770); +#58770 = CARTESIAN_POINT('',(-2.85,-0.625,1.2)); +#58771 = LINE('',#58772,#58773); +#58772 = CARTESIAN_POINT('',(-2.725,-0.625,1.2)); +#58773 = VECTOR('',#58774,1.); +#58774 = DIRECTION('',(-1.,0.,0.)); +#58775 = ORIENTED_EDGE('',*,*,#58776,.T.); +#58776 = EDGE_CURVE('',#58769,#58777,#58779,.T.); +#58777 = VERTEX_POINT('',#58778); +#58778 = CARTESIAN_POINT('',(-2.725,-0.75,1.2)); +#58779 = CIRCLE('',#58780,0.125); +#58780 = AXIS2_PLACEMENT_3D('',#58781,#58782,#58783); +#58781 = CARTESIAN_POINT('',(-2.85,-0.75,1.2)); +#58782 = DIRECTION('',(-0.,-0.,-1.)); +#58783 = DIRECTION('',(0.,-1.,0.)); +#58784 = ORIENTED_EDGE('',*,*,#58785,.F.); +#58785 = EDGE_CURVE('',#58786,#58777,#58788,.T.); +#58786 = VERTEX_POINT('',#58787); +#58787 = CARTESIAN_POINT('',(-2.725,-1.3,1.2)); +#58788 = LINE('',#58789,#58790); +#58789 = CARTESIAN_POINT('',(-2.725,-1.425,1.2)); +#58790 = VECTOR('',#58791,1.); +#58791 = DIRECTION('',(0.,1.,0.)); +#58792 = ORIENTED_EDGE('',*,*,#58793,.T.); +#58793 = EDGE_CURVE('',#58786,#58794,#58796,.T.); +#58794 = VERTEX_POINT('',#58795); +#58795 = CARTESIAN_POINT('',(-2.85,-1.425,1.2)); +#58796 = CIRCLE('',#58797,0.125); +#58797 = AXIS2_PLACEMENT_3D('',#58798,#58799,#58800); +#58798 = CARTESIAN_POINT('',(-2.85,-1.3,1.2)); +#58799 = DIRECTION('',(-0.,-0.,-1.)); +#58800 = DIRECTION('',(0.,-1.,0.)); +#58801 = ORIENTED_EDGE('',*,*,#58802,.F.); +#58802 = EDGE_CURVE('',#58803,#58794,#58805,.T.); +#58803 = VERTEX_POINT('',#58804); +#58804 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#58805 = LINE('',#58806,#58807); +#58806 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#58807 = VECTOR('',#58808,1.); +#58808 = DIRECTION('',(1.,0.,0.)); +#58809 = ORIENTED_EDGE('',*,*,#58810,.F.); +#58810 = EDGE_CURVE('',#58811,#58803,#58813,.T.); +#58811 = VERTEX_POINT('',#58812); +#58812 = CARTESIAN_POINT('',(-3.05,-1.5,1.2)); +#58813 = LINE('',#58814,#58815); +#58814 = CARTESIAN_POINT('',(-3.05,-1.65,1.2)); +#58815 = VECTOR('',#58816,1.); +#58816 = DIRECTION('',(0.,1.,0.)); +#58817 = ORIENTED_EDGE('',*,*,#58818,.T.); +#58818 = EDGE_CURVE('',#58811,#58819,#58821,.T.); +#58819 = VERTEX_POINT('',#58820); +#58820 = CARTESIAN_POINT('',(-2.9,-1.65,1.2)); +#58821 = CIRCLE('',#58822,0.15); +#58822 = AXIS2_PLACEMENT_3D('',#58823,#58824,#58825); +#58823 = CARTESIAN_POINT('',(-2.9,-1.5,1.2)); +#58824 = DIRECTION('',(-0.,0.,1.)); +#58825 = DIRECTION('',(0.,-1.,0.)); +#58826 = ORIENTED_EDGE('',*,*,#58827,.F.); +#58827 = EDGE_CURVE('',#58828,#58819,#58830,.T.); +#58828 = VERTEX_POINT('',#58829); +#58829 = CARTESIAN_POINT('',(2.9,-1.65,1.2)); +#58830 = LINE('',#58831,#58832); +#58831 = CARTESIAN_POINT('',(3.05,-1.65,1.2)); +#58832 = VECTOR('',#58833,1.); +#58833 = DIRECTION('',(-1.,0.,0.)); +#58834 = ORIENTED_EDGE('',*,*,#58835,.F.); +#58835 = EDGE_CURVE('',#58836,#58828,#58838,.T.); +#58836 = VERTEX_POINT('',#58837); +#58837 = CARTESIAN_POINT('',(3.05,-1.5,1.2)); +#58838 = CIRCLE('',#58839,0.15); +#58839 = AXIS2_PLACEMENT_3D('',#58840,#58841,#58842); +#58840 = CARTESIAN_POINT('',(2.9,-1.5,1.2)); +#58841 = DIRECTION('',(-0.,-0.,-1.)); +#58842 = DIRECTION('',(0.,-1.,0.)); +#58843 = ORIENTED_EDGE('',*,*,#58844,.F.); +#58844 = EDGE_CURVE('',#58845,#58836,#58847,.T.); +#58845 = VERTEX_POINT('',#58846); +#58846 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#58847 = LINE('',#58848,#58849); +#58848 = CARTESIAN_POINT('',(3.05,1.65,1.2)); +#58849 = VECTOR('',#58850,1.); +#58850 = DIRECTION('',(0.,-1.,0.)); +#58851 = ORIENTED_EDGE('',*,*,#58852,.T.); +#58852 = EDGE_CURVE('',#58845,#58853,#58855,.T.); +#58853 = VERTEX_POINT('',#58854); +#58854 = CARTESIAN_POINT('',(2.85,-1.425,1.2)); +#58855 = LINE('',#58856,#58857); +#58856 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#58857 = VECTOR('',#58858,1.); +#58858 = DIRECTION('',(-1.,-0.,-0.)); +#58859 = ORIENTED_EDGE('',*,*,#58860,.F.); +#58860 = EDGE_CURVE('',#58861,#58853,#58863,.T.); +#58861 = VERTEX_POINT('',#58862); +#58862 = CARTESIAN_POINT('',(2.725,-1.3,1.2)); +#58863 = CIRCLE('',#58864,0.125); +#58864 = AXIS2_PLACEMENT_3D('',#58865,#58866,#58867); +#58865 = CARTESIAN_POINT('',(2.85,-1.3,1.2)); +#58866 = DIRECTION('',(-0.,0.,1.)); +#58867 = DIRECTION('',(0.,-1.,0.)); +#58868 = ORIENTED_EDGE('',*,*,#58869,.T.); +#58869 = EDGE_CURVE('',#58861,#58870,#58872,.T.); +#58870 = VERTEX_POINT('',#58871); +#58871 = CARTESIAN_POINT('',(2.725,-0.75,1.2)); +#58872 = LINE('',#58873,#58874); +#58873 = CARTESIAN_POINT('',(2.725,-1.425,1.2)); +#58874 = VECTOR('',#58875,1.); +#58875 = DIRECTION('',(0.,1.,0.)); +#58876 = ORIENTED_EDGE('',*,*,#58877,.F.); +#58877 = EDGE_CURVE('',#58878,#58870,#58880,.T.); +#58878 = VERTEX_POINT('',#58879); +#58879 = CARTESIAN_POINT('',(2.85,-0.625,1.2)); +#58880 = CIRCLE('',#58881,0.125); +#58881 = AXIS2_PLACEMENT_3D('',#58882,#58883,#58884); +#58882 = CARTESIAN_POINT('',(2.85,-0.75,1.2)); +#58883 = DIRECTION('',(-0.,0.,1.)); +#58884 = DIRECTION('',(0.,-1.,0.)); +#58885 = ORIENTED_EDGE('',*,*,#58886,.T.); +#58886 = EDGE_CURVE('',#58878,#58887,#58889,.T.); +#58887 = VERTEX_POINT('',#58888); +#58888 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#58889 = LINE('',#58890,#58891); +#58890 = CARTESIAN_POINT('',(2.725,-0.625,1.2)); +#58891 = VECTOR('',#58892,1.); +#58892 = DIRECTION('',(1.,0.,0.)); +#58893 = ORIENTED_EDGE('',*,*,#58894,.F.); +#58894 = EDGE_CURVE('',#58895,#58887,#58897,.T.); +#58895 = VERTEX_POINT('',#58896); +#58896 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#58897 = LINE('',#58898,#58899); +#58898 = CARTESIAN_POINT('',(3.05,1.65,1.2)); +#58899 = VECTOR('',#58900,1.); +#58900 = DIRECTION('',(0.,-1.,0.)); +#58901 = ORIENTED_EDGE('',*,*,#58902,.F.); +#58902 = EDGE_CURVE('',#58903,#58895,#58905,.T.); +#58903 = VERTEX_POINT('',#58904); +#58904 = CARTESIAN_POINT('',(2.85,0.625,1.2)); +#58905 = LINE('',#58906,#58907); +#58906 = CARTESIAN_POINT('',(2.725,0.625,1.2)); +#58907 = VECTOR('',#58908,1.); +#58908 = DIRECTION('',(1.,0.,0.)); +#58909 = ORIENTED_EDGE('',*,*,#58910,.F.); +#58910 = EDGE_CURVE('',#58911,#58903,#58913,.T.); +#58911 = VERTEX_POINT('',#58912); +#58912 = CARTESIAN_POINT('',(2.725,0.75,1.2)); +#58913 = CIRCLE('',#58914,0.125); +#58914 = AXIS2_PLACEMENT_3D('',#58915,#58916,#58917); +#58915 = CARTESIAN_POINT('',(2.85,0.75,1.2)); +#58916 = DIRECTION('',(-0.,0.,1.)); +#58917 = DIRECTION('',(0.,-1.,0.)); +#58918 = ORIENTED_EDGE('',*,*,#58919,.F.); +#58919 = EDGE_CURVE('',#58920,#58911,#58922,.T.); +#58920 = VERTEX_POINT('',#58921); +#58921 = CARTESIAN_POINT('',(2.725,1.3,1.2)); +#58922 = LINE('',#58923,#58924); +#58923 = CARTESIAN_POINT('',(2.725,1.425,1.2)); +#58924 = VECTOR('',#58925,1.); +#58925 = DIRECTION('',(0.,-1.,0.)); +#58926 = ORIENTED_EDGE('',*,*,#58927,.F.); +#58927 = EDGE_CURVE('',#58928,#58920,#58930,.T.); +#58928 = VERTEX_POINT('',#58929); +#58929 = CARTESIAN_POINT('',(2.85,1.425,1.2)); +#58930 = CIRCLE('',#58931,0.125); +#58931 = AXIS2_PLACEMENT_3D('',#58932,#58933,#58934); +#58932 = CARTESIAN_POINT('',(2.85,1.3,1.2)); +#58933 = DIRECTION('',(-0.,0.,1.)); +#58934 = DIRECTION('',(0.,-1.,0.)); +#58935 = ORIENTED_EDGE('',*,*,#58936,.F.); +#58936 = EDGE_CURVE('',#58937,#58928,#58939,.T.); +#58937 = VERTEX_POINT('',#58938); +#58938 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#58939 = LINE('',#58940,#58941); +#58940 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#58941 = VECTOR('',#58942,1.); +#58942 = DIRECTION('',(-1.,0.,0.)); +#58943 = ORIENTED_EDGE('',*,*,#58944,.F.); +#58944 = EDGE_CURVE('',#58945,#58937,#58947,.T.); +#58945 = VERTEX_POINT('',#58946); +#58946 = CARTESIAN_POINT('',(3.05,1.5,1.2)); +#58947 = LINE('',#58948,#58949); +#58948 = CARTESIAN_POINT('',(3.05,1.65,1.2)); +#58949 = VECTOR('',#58950,1.); +#58950 = DIRECTION('',(0.,-1.,0.)); +#58951 = ORIENTED_EDGE('',*,*,#58952,.F.); +#58952 = EDGE_CURVE('',#58953,#58945,#58955,.T.); +#58953 = VERTEX_POINT('',#58954); +#58954 = CARTESIAN_POINT('',(2.9,1.65,1.2)); +#58955 = CIRCLE('',#58956,0.15); +#58956 = AXIS2_PLACEMENT_3D('',#58957,#58958,#58959); +#58957 = CARTESIAN_POINT('',(2.9,1.5,1.2)); +#58958 = DIRECTION('',(-0.,-0.,-1.)); +#58959 = DIRECTION('',(0.,-1.,0.)); +#58960 = ORIENTED_EDGE('',*,*,#58961,.F.); +#58961 = EDGE_CURVE('',#58962,#58953,#58964,.T.); +#58962 = VERTEX_POINT('',#58963); +#58963 = CARTESIAN_POINT('',(-2.9,1.65,1.2)); +#58964 = LINE('',#58965,#58966); +#58965 = CARTESIAN_POINT('',(-3.05,1.65,1.2)); +#58966 = VECTOR('',#58967,1.); +#58967 = DIRECTION('',(1.,0.,0.)); +#58968 = ORIENTED_EDGE('',*,*,#58969,.T.); +#58969 = EDGE_CURVE('',#58962,#58970,#58972,.T.); +#58970 = VERTEX_POINT('',#58971); +#58971 = CARTESIAN_POINT('',(-3.05,1.5,1.2)); +#58972 = CIRCLE('',#58973,0.15); +#58973 = AXIS2_PLACEMENT_3D('',#58974,#58975,#58976); +#58974 = CARTESIAN_POINT('',(-2.9,1.5,1.2)); +#58975 = DIRECTION('',(-0.,0.,1.)); +#58976 = DIRECTION('',(0.,-1.,0.)); +#58977 = ORIENTED_EDGE('',*,*,#58978,.F.); +#58978 = EDGE_CURVE('',#58717,#58970,#58979,.T.); +#58979 = LINE('',#58980,#58981); +#58980 = CARTESIAN_POINT('',(-3.05,-1.65,1.2)); +#58981 = VECTOR('',#58982,1.); +#58982 = DIRECTION('',(0.,1.,0.)); +#58983 = PLANE('',#58984); +#58984 = AXIS2_PLACEMENT_3D('',#58985,#58986,#58987); +#58985 = CARTESIAN_POINT('',(9.E-17,0.,1.2)); +#58986 = DIRECTION('',(0.,0.,1.)); +#58987 = DIRECTION('',(1.,0.,-0.)); +#58988 = ADVANCED_FACE('',(#58989),#59014,.F.); +#58989 = FACE_BOUND('',#58990,.T.); +#58990 = EDGE_LOOP('',(#58991,#58992,#59000,#59008)); +#58991 = ORIENTED_EDGE('',*,*,#58716,.F.); +#58992 = ORIENTED_EDGE('',*,*,#58993,.T.); +#58993 = EDGE_CURVE('',#58717,#58994,#58996,.T.); +#58994 = VERTEX_POINT('',#58995); +#58995 = CARTESIAN_POINT('',(-3.05,1.425,1.4)); +#58996 = LINE('',#58997,#58998); +#58997 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#58998 = VECTOR('',#58999,1.); +#58999 = DIRECTION('',(0.,0.,1.)); +#59000 = ORIENTED_EDGE('',*,*,#59001,.T.); +#59001 = EDGE_CURVE('',#58994,#59002,#59004,.T.); +#59002 = VERTEX_POINT('',#59003); +#59003 = CARTESIAN_POINT('',(-2.85,1.425,1.4)); +#59004 = LINE('',#59005,#59006); +#59005 = CARTESIAN_POINT('',(-3.05,1.425,1.4)); +#59006 = VECTOR('',#59007,1.); +#59007 = DIRECTION('',(1.,0.,0.)); +#59008 = ORIENTED_EDGE('',*,*,#59009,.F.); +#59009 = EDGE_CURVE('',#58719,#59002,#59010,.T.); +#59010 = LINE('',#59011,#59012); +#59011 = CARTESIAN_POINT('',(-2.85,1.425,1.2)); +#59012 = VECTOR('',#59013,1.); +#59013 = DIRECTION('',(0.,0.,1.)); +#59014 = PLANE('',#59015); +#59015 = AXIS2_PLACEMENT_3D('',#59016,#59017,#59018); +#59016 = CARTESIAN_POINT('',(-3.05,1.425,1.2)); +#59017 = DIRECTION('',(-0.,-1.,-0.)); +#59018 = DIRECTION('',(-1.,0.,0.)); +#59019 = ADVANCED_FACE('',(#59020),#59039,.T.); +#59020 = FACE_BOUND('',#59021,.T.); +#59021 = EDGE_LOOP('',(#59022,#59023,#59032,#59038)); +#59022 = ORIENTED_EDGE('',*,*,#59009,.T.); +#59023 = ORIENTED_EDGE('',*,*,#59024,.T.); +#59024 = EDGE_CURVE('',#59002,#59025,#59027,.T.); +#59025 = VERTEX_POINT('',#59026); +#59026 = CARTESIAN_POINT('',(-2.725,1.3,1.4)); +#59027 = CIRCLE('',#59028,0.125); +#59028 = AXIS2_PLACEMENT_3D('',#59029,#59030,#59031); +#59029 = CARTESIAN_POINT('',(-2.85,1.3,1.4)); +#59030 = DIRECTION('',(-0.,-0.,-1.)); +#59031 = DIRECTION('',(0.,-1.,0.)); +#59032 = ORIENTED_EDGE('',*,*,#59033,.F.); +#59033 = EDGE_CURVE('',#58727,#59025,#59034,.T.); +#59034 = LINE('',#59035,#59036); +#59035 = CARTESIAN_POINT('',(-2.725,1.3,1.2)); +#59036 = VECTOR('',#59037,1.); +#59037 = DIRECTION('',(0.,0.,1.)); +#59038 = ORIENTED_EDGE('',*,*,#58726,.F.); +#59039 = CYLINDRICAL_SURFACE('',#59040,0.125); +#59040 = AXIS2_PLACEMENT_3D('',#59041,#59042,#59043); +#59041 = CARTESIAN_POINT('',(-2.85,1.3,1.2)); +#59042 = DIRECTION('',(0.,0.,1.)); +#59043 = DIRECTION('',(0.,1.,0.)); +#59044 = ADVANCED_FACE('',(#59045),#59116,.T.); +#59045 = FACE_BOUND('',#59046,.T.); +#59046 = EDGE_LOOP('',(#59047,#59057,#59063,#59064,#59070,#59071,#59077, + #59078,#59086,#59094,#59102,#59110)); +#59047 = ORIENTED_EDGE('',*,*,#59048,.T.); +#59048 = EDGE_CURVE('',#59049,#59051,#59053,.T.); +#59049 = VERTEX_POINT('',#59050); +#59050 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59051 = VERTEX_POINT('',#59052); +#59052 = CARTESIAN_POINT('',(-3.05,-1.5,0.7)); +#59053 = LINE('',#59054,#59055); +#59054 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59055 = VECTOR('',#59056,1.); +#59056 = DIRECTION('',(0.,-1.,0.)); +#59057 = ORIENTED_EDGE('',*,*,#59058,.T.); +#59058 = EDGE_CURVE('',#59051,#58811,#59059,.T.); +#59059 = LINE('',#59060,#59061); +#59060 = CARTESIAN_POINT('',(-3.05,-1.5,0.7)); +#59061 = VECTOR('',#59062,1.); +#59062 = DIRECTION('',(0.,0.,1.)); +#59063 = ORIENTED_EDGE('',*,*,#58810,.T.); +#59064 = ORIENTED_EDGE('',*,*,#59065,.F.); +#59065 = EDGE_CURVE('',#58761,#58803,#59066,.T.); +#59066 = LINE('',#59067,#59068); +#59067 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#59068 = VECTOR('',#59069,1.); +#59069 = DIRECTION('',(0.,-1.,0.)); +#59070 = ORIENTED_EDGE('',*,*,#58760,.T.); +#59071 = ORIENTED_EDGE('',*,*,#59072,.T.); +#59072 = EDGE_CURVE('',#58753,#58717,#59073,.T.); +#59073 = LINE('',#59074,#59075); +#59074 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#59075 = VECTOR('',#59076,1.); +#59076 = DIRECTION('',(0.,1.,0.)); +#59077 = ORIENTED_EDGE('',*,*,#58978,.T.); +#59078 = ORIENTED_EDGE('',*,*,#59079,.F.); +#59079 = EDGE_CURVE('',#59080,#58970,#59082,.T.); +#59080 = VERTEX_POINT('',#59081); +#59081 = CARTESIAN_POINT('',(-3.05,1.5,0.7)); +#59082 = LINE('',#59083,#59084); +#59083 = CARTESIAN_POINT('',(-3.05,1.5,0.7)); +#59084 = VECTOR('',#59085,1.); +#59085 = DIRECTION('',(0.,0.,1.)); +#59086 = ORIENTED_EDGE('',*,*,#59087,.F.); +#59087 = EDGE_CURVE('',#59088,#59080,#59090,.T.); +#59088 = VERTEX_POINT('',#59089); +#59089 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#59090 = LINE('',#59091,#59092); +#59091 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#59092 = VECTOR('',#59093,1.); +#59093 = DIRECTION('',(0.,1.,0.)); +#59094 = ORIENTED_EDGE('',*,*,#59095,.F.); +#59095 = EDGE_CURVE('',#59096,#59088,#59098,.T.); +#59096 = VERTEX_POINT('',#59097); +#59097 = CARTESIAN_POINT('',(-3.05,0.75,0.3)); +#59098 = LINE('',#59099,#59100); +#59099 = CARTESIAN_POINT('',(-3.05,0.75,0.)); +#59100 = VECTOR('',#59101,1.); +#59101 = DIRECTION('',(0.,0.,1.)); +#59102 = ORIENTED_EDGE('',*,*,#59103,.F.); +#59103 = EDGE_CURVE('',#59104,#59096,#59106,.T.); +#59104 = VERTEX_POINT('',#59105); +#59105 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59106 = LINE('',#59107,#59108); +#59107 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59108 = VECTOR('',#59109,1.); +#59109 = DIRECTION('',(2.2E-16,1.,0.)); +#59110 = ORIENTED_EDGE('',*,*,#59111,.T.); +#59111 = EDGE_CURVE('',#59104,#59049,#59112,.T.); +#59112 = LINE('',#59113,#59114); +#59113 = CARTESIAN_POINT('',(-3.05,-0.75,0.)); +#59114 = VECTOR('',#59115,1.); +#59115 = DIRECTION('',(0.,0.,1.)); +#59116 = PLANE('',#59117); +#59117 = AXIS2_PLACEMENT_3D('',#59118,#59119,#59120); +#59118 = CARTESIAN_POINT('',(-3.05,-1.65,0.)); +#59119 = DIRECTION('',(-1.,0.,0.)); +#59120 = DIRECTION('',(0.,1.,0.)); +#59121 = ADVANCED_FACE('',(#59122),#59140,.F.); +#59122 = FACE_BOUND('',#59123,.T.); +#59123 = EDGE_LOOP('',(#59124,#59125,#59126,#59134)); +#59124 = ORIENTED_EDGE('',*,*,#58735,.F.); +#59125 = ORIENTED_EDGE('',*,*,#59033,.T.); +#59126 = ORIENTED_EDGE('',*,*,#59127,.T.); +#59127 = EDGE_CURVE('',#59025,#59128,#59130,.T.); +#59128 = VERTEX_POINT('',#59129); +#59129 = CARTESIAN_POINT('',(-2.725,0.75,1.4)); +#59130 = LINE('',#59131,#59132); +#59131 = CARTESIAN_POINT('',(-2.725,1.425,1.4)); +#59132 = VECTOR('',#59133,1.); +#59133 = DIRECTION('',(-0.,-1.,-0.)); +#59134 = ORIENTED_EDGE('',*,*,#59135,.F.); +#59135 = EDGE_CURVE('',#58736,#59128,#59136,.T.); +#59136 = LINE('',#59137,#59138); +#59137 = CARTESIAN_POINT('',(-2.725,0.75,1.2)); +#59138 = VECTOR('',#59139,1.); +#59139 = DIRECTION('',(0.,0.,1.)); +#59140 = PLANE('',#59141); +#59141 = AXIS2_PLACEMENT_3D('',#59142,#59143,#59144); +#59142 = CARTESIAN_POINT('',(-2.725,1.425,1.2)); +#59143 = DIRECTION('',(-1.,-0.,-0.)); +#59144 = DIRECTION('',(0.,1.,0.)); +#59145 = ADVANCED_FACE('',(#59146),#59165,.T.); +#59146 = FACE_BOUND('',#59147,.T.); +#59147 = EDGE_LOOP('',(#59148,#59157,#59158,#59159)); +#59148 = ORIENTED_EDGE('',*,*,#59149,.T.); +#59149 = EDGE_CURVE('',#59150,#59080,#59152,.T.); +#59150 = VERTEX_POINT('',#59151); +#59151 = CARTESIAN_POINT('',(-2.9,1.65,0.7)); +#59152 = CIRCLE('',#59153,0.15); +#59153 = AXIS2_PLACEMENT_3D('',#59154,#59155,#59156); +#59154 = CARTESIAN_POINT('',(-2.9,1.5,0.7)); +#59155 = DIRECTION('',(-0.,0.,1.)); +#59156 = DIRECTION('',(0.,-1.,0.)); +#59157 = ORIENTED_EDGE('',*,*,#59079,.T.); +#59158 = ORIENTED_EDGE('',*,*,#58969,.F.); +#59159 = ORIENTED_EDGE('',*,*,#59160,.F.); +#59160 = EDGE_CURVE('',#59150,#58962,#59161,.T.); +#59161 = LINE('',#59162,#59163); +#59162 = CARTESIAN_POINT('',(-2.9,1.65,0.7)); +#59163 = VECTOR('',#59164,1.); +#59164 = DIRECTION('',(0.,0.,1.)); +#59165 = CYLINDRICAL_SURFACE('',#59166,0.15); +#59166 = AXIS2_PLACEMENT_3D('',#59167,#59168,#59169); +#59167 = CARTESIAN_POINT('',(-2.9,1.5,0.7)); +#59168 = DIRECTION('',(0.,0.,1.)); +#59169 = DIRECTION('',(0.,1.,0.)); +#59170 = ADVANCED_FACE('',(#59171),#59190,.T.); +#59171 = FACE_BOUND('',#59172,.T.); +#59172 = EDGE_LOOP('',(#59173,#59174,#59183,#59189)); +#59173 = ORIENTED_EDGE('',*,*,#59135,.T.); +#59174 = ORIENTED_EDGE('',*,*,#59175,.T.); +#59175 = EDGE_CURVE('',#59128,#59176,#59178,.T.); +#59176 = VERTEX_POINT('',#59177); +#59177 = CARTESIAN_POINT('',(-2.85,0.625,1.4)); +#59178 = CIRCLE('',#59179,0.125); +#59179 = AXIS2_PLACEMENT_3D('',#59180,#59181,#59182); +#59180 = CARTESIAN_POINT('',(-2.85,0.75,1.4)); +#59181 = DIRECTION('',(-0.,-0.,-1.)); +#59182 = DIRECTION('',(0.,-1.,0.)); +#59183 = ORIENTED_EDGE('',*,*,#59184,.F.); +#59184 = EDGE_CURVE('',#58744,#59176,#59185,.T.); +#59185 = LINE('',#59186,#59187); +#59186 = CARTESIAN_POINT('',(-2.85,0.625,1.2)); +#59187 = VECTOR('',#59188,1.); +#59188 = DIRECTION('',(0.,0.,1.)); +#59189 = ORIENTED_EDGE('',*,*,#58743,.F.); +#59190 = CYLINDRICAL_SURFACE('',#59191,0.125); +#59191 = AXIS2_PLACEMENT_3D('',#59192,#59193,#59194); +#59192 = CARTESIAN_POINT('',(-2.85,0.75,1.2)); +#59193 = DIRECTION('',(0.,0.,1.)); +#59194 = DIRECTION('',(1.,0.,-0.)); +#59195 = ADVANCED_FACE('',(#59196),#59246,.T.); +#59196 = FACE_BOUND('',#59197,.T.); +#59197 = EDGE_LOOP('',(#59198,#59208,#59216,#59224,#59232,#59238,#59239, + #59240)); +#59198 = ORIENTED_EDGE('',*,*,#59199,.T.); +#59199 = EDGE_CURVE('',#59200,#59202,#59204,.T.); +#59200 = VERTEX_POINT('',#59201); +#59201 = CARTESIAN_POINT('',(2.9,1.65,0.7)); +#59202 = VERTEX_POINT('',#59203); +#59203 = CARTESIAN_POINT('',(2.75,1.65,0.7)); +#59204 = LINE('',#59205,#59206); +#59205 = CARTESIAN_POINT('',(3.05,1.65,0.7)); +#59206 = VECTOR('',#59207,1.); +#59207 = DIRECTION('',(-1.,-0.,-0.)); +#59208 = ORIENTED_EDGE('',*,*,#59209,.T.); +#59209 = EDGE_CURVE('',#59202,#59210,#59212,.T.); +#59210 = VERTEX_POINT('',#59211); +#59211 = CARTESIAN_POINT('',(2.75,1.65,0.)); +#59212 = LINE('',#59213,#59214); +#59213 = CARTESIAN_POINT('',(2.75,1.65,0.7)); +#59214 = VECTOR('',#59215,1.); +#59215 = DIRECTION('',(0.,0.,-1.)); +#59216 = ORIENTED_EDGE('',*,*,#59217,.F.); +#59217 = EDGE_CURVE('',#59218,#59210,#59220,.T.); +#59218 = VERTEX_POINT('',#59219); +#59219 = CARTESIAN_POINT('',(-2.75,1.65,0.)); +#59220 = LINE('',#59221,#59222); +#59221 = CARTESIAN_POINT('',(-3.05,1.65,0.)); +#59222 = VECTOR('',#59223,1.); +#59223 = DIRECTION('',(1.,0.,0.)); +#59224 = ORIENTED_EDGE('',*,*,#59225,.F.); +#59225 = EDGE_CURVE('',#59226,#59218,#59228,.T.); +#59226 = VERTEX_POINT('',#59227); +#59227 = CARTESIAN_POINT('',(-2.75,1.65,0.7)); +#59228 = LINE('',#59229,#59230); +#59229 = CARTESIAN_POINT('',(-2.75,1.65,0.7)); +#59230 = VECTOR('',#59231,1.); +#59231 = DIRECTION('',(-0.,-0.,-1.)); +#59232 = ORIENTED_EDGE('',*,*,#59233,.F.); +#59233 = EDGE_CURVE('',#59150,#59226,#59234,.T.); +#59234 = LINE('',#59235,#59236); +#59235 = CARTESIAN_POINT('',(-3.05,1.65,0.7)); +#59236 = VECTOR('',#59237,1.); +#59237 = DIRECTION('',(1.,0.,0.)); +#59238 = ORIENTED_EDGE('',*,*,#59160,.T.); +#59239 = ORIENTED_EDGE('',*,*,#58961,.T.); +#59240 = ORIENTED_EDGE('',*,*,#59241,.F.); +#59241 = EDGE_CURVE('',#59200,#58953,#59242,.T.); +#59242 = LINE('',#59243,#59244); +#59243 = CARTESIAN_POINT('',(2.9,1.65,0.7)); +#59244 = VECTOR('',#59245,1.); +#59245 = DIRECTION('',(0.,0.,1.)); +#59246 = PLANE('',#59247); +#59247 = AXIS2_PLACEMENT_3D('',#59248,#59249,#59250); +#59248 = CARTESIAN_POINT('',(-3.05,1.65,0.)); +#59249 = DIRECTION('',(0.,1.,0.)); +#59250 = DIRECTION('',(1.,0.,0.)); +#59251 = ADVANCED_FACE('',(#59252),#59270,.F.); +#59252 = FACE_BOUND('',#59253,.T.); +#59253 = EDGE_LOOP('',(#59254,#59255,#59256,#59264)); +#59254 = ORIENTED_EDGE('',*,*,#58752,.F.); +#59255 = ORIENTED_EDGE('',*,*,#59184,.T.); +#59256 = ORIENTED_EDGE('',*,*,#59257,.T.); +#59257 = EDGE_CURVE('',#59176,#59258,#59260,.T.); +#59258 = VERTEX_POINT('',#59259); +#59259 = CARTESIAN_POINT('',(-3.05,0.625,1.4)); +#59260 = LINE('',#59261,#59262); +#59261 = CARTESIAN_POINT('',(-2.725,0.625,1.4)); +#59262 = VECTOR('',#59263,1.); +#59263 = DIRECTION('',(-1.,-0.,-0.)); +#59264 = ORIENTED_EDGE('',*,*,#59265,.F.); +#59265 = EDGE_CURVE('',#58753,#59258,#59266,.T.); +#59266 = LINE('',#59267,#59268); +#59267 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#59268 = VECTOR('',#59269,1.); +#59269 = DIRECTION('',(0.,0.,1.)); +#59270 = PLANE('',#59271); +#59271 = AXIS2_PLACEMENT_3D('',#59272,#59273,#59274); +#59272 = CARTESIAN_POINT('',(-2.725,0.625,1.2)); +#59273 = DIRECTION('',(0.,1.,0.)); +#59274 = DIRECTION('',(1.,0.,0.)); +#59275 = ADVANCED_FACE('',(#59276),#59295,.T.); +#59276 = FACE_BOUND('',#59277,.T.); +#59277 = EDGE_LOOP('',(#59278,#59279,#59280,#59288)); +#59278 = ORIENTED_EDGE('',*,*,#59241,.T.); +#59279 = ORIENTED_EDGE('',*,*,#58952,.T.); +#59280 = ORIENTED_EDGE('',*,*,#59281,.F.); +#59281 = EDGE_CURVE('',#59282,#58945,#59284,.T.); +#59282 = VERTEX_POINT('',#59283); +#59283 = CARTESIAN_POINT('',(3.05,1.5,0.7)); +#59284 = LINE('',#59285,#59286); +#59285 = CARTESIAN_POINT('',(3.05,1.5,0.7)); +#59286 = VECTOR('',#59287,1.); +#59287 = DIRECTION('',(0.,0.,1.)); +#59288 = ORIENTED_EDGE('',*,*,#59289,.F.); +#59289 = EDGE_CURVE('',#59200,#59282,#59290,.T.); +#59290 = CIRCLE('',#59291,0.15); +#59291 = AXIS2_PLACEMENT_3D('',#59292,#59293,#59294); +#59292 = CARTESIAN_POINT('',(2.9,1.5,0.7)); +#59293 = DIRECTION('',(-0.,-0.,-1.)); +#59294 = DIRECTION('',(0.,-1.,0.)); +#59295 = CYLINDRICAL_SURFACE('',#59296,0.15); +#59296 = AXIS2_PLACEMENT_3D('',#59297,#59298,#59299); +#59297 = CARTESIAN_POINT('',(2.9,1.5,0.7)); +#59298 = DIRECTION('',(0.,0.,1.)); +#59299 = DIRECTION('',(0.,1.,0.)); +#59300 = ADVANCED_FACE('',(#59301),#59365,.T.); +#59301 = FACE_BOUND('',#59302,.T.); +#59302 = EDGE_LOOP('',(#59303,#59311,#59319,#59327,#59335,#59343,#59349, + #59350,#59351,#59357,#59358,#59364)); +#59303 = ORIENTED_EDGE('',*,*,#59304,.F.); +#59304 = EDGE_CURVE('',#59305,#58836,#59307,.T.); +#59305 = VERTEX_POINT('',#59306); +#59306 = CARTESIAN_POINT('',(3.05,-1.5,0.7)); +#59307 = LINE('',#59308,#59309); +#59308 = CARTESIAN_POINT('',(3.05,-1.5,0.7)); +#59309 = VECTOR('',#59310,1.); +#59310 = DIRECTION('',(0.,0.,1.)); +#59311 = ORIENTED_EDGE('',*,*,#59312,.F.); +#59312 = EDGE_CURVE('',#59313,#59305,#59315,.T.); +#59313 = VERTEX_POINT('',#59314); +#59314 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#59315 = LINE('',#59316,#59317); +#59316 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#59317 = VECTOR('',#59318,1.); +#59318 = DIRECTION('',(-0.,-1.,-0.)); +#59319 = ORIENTED_EDGE('',*,*,#59320,.F.); +#59320 = EDGE_CURVE('',#59321,#59313,#59323,.T.); +#59321 = VERTEX_POINT('',#59322); +#59322 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#59323 = LINE('',#59324,#59325); +#59324 = CARTESIAN_POINT('',(3.05,-0.75,0.)); +#59325 = VECTOR('',#59326,1.); +#59326 = DIRECTION('',(0.,0.,1.)); +#59327 = ORIENTED_EDGE('',*,*,#59328,.T.); +#59328 = EDGE_CURVE('',#59321,#59329,#59331,.T.); +#59329 = VERTEX_POINT('',#59330); +#59330 = CARTESIAN_POINT('',(3.05,0.75,0.3)); +#59331 = LINE('',#59332,#59333); +#59332 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#59333 = VECTOR('',#59334,1.); +#59334 = DIRECTION('',(0.,1.,0.)); +#59335 = ORIENTED_EDGE('',*,*,#59336,.T.); +#59336 = EDGE_CURVE('',#59329,#59337,#59339,.T.); +#59337 = VERTEX_POINT('',#59338); +#59338 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#59339 = LINE('',#59340,#59341); +#59340 = CARTESIAN_POINT('',(3.05,0.75,0.)); +#59341 = VECTOR('',#59342,1.); +#59342 = DIRECTION('',(0.,0.,1.)); +#59343 = ORIENTED_EDGE('',*,*,#59344,.T.); +#59344 = EDGE_CURVE('',#59337,#59282,#59345,.T.); +#59345 = LINE('',#59346,#59347); +#59346 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#59347 = VECTOR('',#59348,1.); +#59348 = DIRECTION('',(0.,1.,0.)); +#59349 = ORIENTED_EDGE('',*,*,#59281,.T.); +#59350 = ORIENTED_EDGE('',*,*,#58944,.T.); +#59351 = ORIENTED_EDGE('',*,*,#59352,.F.); +#59352 = EDGE_CURVE('',#58895,#58937,#59353,.T.); +#59353 = LINE('',#59354,#59355); +#59354 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#59355 = VECTOR('',#59356,1.); +#59356 = DIRECTION('',(0.,1.,0.)); +#59357 = ORIENTED_EDGE('',*,*,#58894,.T.); +#59358 = ORIENTED_EDGE('',*,*,#59359,.T.); +#59359 = EDGE_CURVE('',#58887,#58845,#59360,.T.); +#59360 = LINE('',#59361,#59362); +#59361 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#59362 = VECTOR('',#59363,1.); +#59363 = DIRECTION('',(-0.,-1.,-0.)); +#59364 = ORIENTED_EDGE('',*,*,#58844,.T.); +#59365 = PLANE('',#59366); +#59366 = AXIS2_PLACEMENT_3D('',#59367,#59368,#59369); +#59367 = CARTESIAN_POINT('',(3.05,1.65,0.)); +#59368 = DIRECTION('',(1.,0.,0.)); +#59369 = DIRECTION('',(0.,-1.,0.)); +#59370 = ADVANCED_FACE('',(#59371),#59396,.F.); +#59371 = FACE_BOUND('',#59372,.F.); +#59372 = EDGE_LOOP('',(#59373,#59374,#59382,#59390)); +#59373 = ORIENTED_EDGE('',*,*,#58768,.F.); +#59374 = ORIENTED_EDGE('',*,*,#59375,.T.); +#59375 = EDGE_CURVE('',#58769,#59376,#59378,.T.); +#59376 = VERTEX_POINT('',#59377); +#59377 = CARTESIAN_POINT('',(-2.85,-0.625,1.4)); +#59378 = LINE('',#59379,#59380); +#59379 = CARTESIAN_POINT('',(-2.85,-0.625,1.2)); +#59380 = VECTOR('',#59381,1.); +#59381 = DIRECTION('',(0.,0.,1.)); +#59382 = ORIENTED_EDGE('',*,*,#59383,.T.); +#59383 = EDGE_CURVE('',#59376,#59384,#59386,.T.); +#59384 = VERTEX_POINT('',#59385); +#59385 = CARTESIAN_POINT('',(-3.05,-0.625,1.4)); +#59386 = LINE('',#59387,#59388); +#59387 = CARTESIAN_POINT('',(-2.725,-0.625,1.4)); +#59388 = VECTOR('',#59389,1.); +#59389 = DIRECTION('',(-1.,0.,0.)); +#59390 = ORIENTED_EDGE('',*,*,#59391,.F.); +#59391 = EDGE_CURVE('',#58761,#59384,#59392,.T.); +#59392 = LINE('',#59393,#59394); +#59393 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#59394 = VECTOR('',#59395,1.); +#59395 = DIRECTION('',(0.,0.,1.)); +#59396 = PLANE('',#59397); +#59397 = AXIS2_PLACEMENT_3D('',#59398,#59399,#59400); +#59398 = CARTESIAN_POINT('',(-2.725,-0.625,1.2)); +#59399 = DIRECTION('',(0.,-1.,0.)); +#59400 = DIRECTION('',(-1.,0.,0.)); +#59401 = ADVANCED_FACE('',(#59402),#59427,.F.); +#59402 = FACE_BOUND('',#59403,.F.); +#59403 = EDGE_LOOP('',(#59404,#59405,#59413,#59421)); +#59404 = ORIENTED_EDGE('',*,*,#58936,.F.); +#59405 = ORIENTED_EDGE('',*,*,#59406,.T.); +#59406 = EDGE_CURVE('',#58937,#59407,#59409,.T.); +#59407 = VERTEX_POINT('',#59408); +#59408 = CARTESIAN_POINT('',(3.05,1.425,1.4)); +#59409 = LINE('',#59410,#59411); +#59410 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#59411 = VECTOR('',#59412,1.); +#59412 = DIRECTION('',(0.,0.,1.)); +#59413 = ORIENTED_EDGE('',*,*,#59414,.T.); +#59414 = EDGE_CURVE('',#59407,#59415,#59417,.T.); +#59415 = VERTEX_POINT('',#59416); +#59416 = CARTESIAN_POINT('',(2.85,1.425,1.4)); +#59417 = LINE('',#59418,#59419); +#59418 = CARTESIAN_POINT('',(3.05,1.425,1.4)); +#59419 = VECTOR('',#59420,1.); +#59420 = DIRECTION('',(-1.,0.,0.)); +#59421 = ORIENTED_EDGE('',*,*,#59422,.F.); +#59422 = EDGE_CURVE('',#58928,#59415,#59423,.T.); +#59423 = LINE('',#59424,#59425); +#59424 = CARTESIAN_POINT('',(2.85,1.425,1.2)); +#59425 = VECTOR('',#59426,1.); +#59426 = DIRECTION('',(0.,0.,1.)); +#59427 = PLANE('',#59428); +#59428 = AXIS2_PLACEMENT_3D('',#59429,#59430,#59431); +#59429 = CARTESIAN_POINT('',(3.05,1.425,1.2)); +#59430 = DIRECTION('',(0.,-1.,0.)); +#59431 = DIRECTION('',(-1.,0.,0.)); +#59432 = ADVANCED_FACE('',(#59433),#59452,.T.); +#59433 = FACE_BOUND('',#59434,.T.); +#59434 = EDGE_LOOP('',(#59435,#59436,#59445,#59451)); +#59435 = ORIENTED_EDGE('',*,*,#59375,.T.); +#59436 = ORIENTED_EDGE('',*,*,#59437,.T.); +#59437 = EDGE_CURVE('',#59376,#59438,#59440,.T.); +#59438 = VERTEX_POINT('',#59439); +#59439 = CARTESIAN_POINT('',(-2.725,-0.75,1.4)); +#59440 = CIRCLE('',#59441,0.125); +#59441 = AXIS2_PLACEMENT_3D('',#59442,#59443,#59444); +#59442 = CARTESIAN_POINT('',(-2.85,-0.75,1.4)); +#59443 = DIRECTION('',(-0.,-0.,-1.)); +#59444 = DIRECTION('',(0.,-1.,0.)); +#59445 = ORIENTED_EDGE('',*,*,#59446,.F.); +#59446 = EDGE_CURVE('',#58777,#59438,#59447,.T.); +#59447 = LINE('',#59448,#59449); +#59448 = CARTESIAN_POINT('',(-2.725,-0.75,1.2)); +#59449 = VECTOR('',#59450,1.); +#59450 = DIRECTION('',(0.,0.,1.)); +#59451 = ORIENTED_EDGE('',*,*,#58776,.F.); +#59452 = CYLINDRICAL_SURFACE('',#59453,0.125); +#59453 = AXIS2_PLACEMENT_3D('',#59454,#59455,#59456); +#59454 = CARTESIAN_POINT('',(-2.85,-0.75,1.2)); +#59455 = DIRECTION('',(0.,0.,1.)); +#59456 = DIRECTION('',(0.,1.,0.)); +#59457 = ADVANCED_FACE('',(#59458),#59477,.T.); +#59458 = FACE_BOUND('',#59459,.T.); +#59459 = EDGE_LOOP('',(#59460,#59461,#59469,#59476)); +#59460 = ORIENTED_EDGE('',*,*,#58927,.T.); +#59461 = ORIENTED_EDGE('',*,*,#59462,.T.); +#59462 = EDGE_CURVE('',#58920,#59463,#59465,.T.); +#59463 = VERTEX_POINT('',#59464); +#59464 = CARTESIAN_POINT('',(2.725,1.3,1.4)); +#59465 = LINE('',#59466,#59467); +#59466 = CARTESIAN_POINT('',(2.725,1.3,1.2)); +#59467 = VECTOR('',#59468,1.); +#59468 = DIRECTION('',(0.,0.,1.)); +#59469 = ORIENTED_EDGE('',*,*,#59470,.F.); +#59470 = EDGE_CURVE('',#59415,#59463,#59471,.T.); +#59471 = CIRCLE('',#59472,0.125); +#59472 = AXIS2_PLACEMENT_3D('',#59473,#59474,#59475); +#59473 = CARTESIAN_POINT('',(2.85,1.3,1.4)); +#59474 = DIRECTION('',(-0.,0.,1.)); +#59475 = DIRECTION('',(0.,-1.,0.)); +#59476 = ORIENTED_EDGE('',*,*,#59422,.F.); +#59477 = CYLINDRICAL_SURFACE('',#59478,0.125); +#59478 = AXIS2_PLACEMENT_3D('',#59479,#59480,#59481); +#59479 = CARTESIAN_POINT('',(2.85,1.3,1.2)); +#59480 = DIRECTION('',(0.,0.,1.)); +#59481 = DIRECTION('',(0.,1.,0.)); +#59482 = ADVANCED_FACE('',(#59483),#59501,.F.); +#59483 = FACE_BOUND('',#59484,.F.); +#59484 = EDGE_LOOP('',(#59485,#59486,#59494,#59500)); +#59485 = ORIENTED_EDGE('',*,*,#58785,.F.); +#59486 = ORIENTED_EDGE('',*,*,#59487,.T.); +#59487 = EDGE_CURVE('',#58786,#59488,#59490,.T.); +#59488 = VERTEX_POINT('',#59489); +#59489 = CARTESIAN_POINT('',(-2.725,-1.3,1.4)); +#59490 = LINE('',#59491,#59492); +#59491 = CARTESIAN_POINT('',(-2.725,-1.3,1.2)); +#59492 = VECTOR('',#59493,1.); +#59493 = DIRECTION('',(0.,0.,1.)); +#59494 = ORIENTED_EDGE('',*,*,#59495,.T.); +#59495 = EDGE_CURVE('',#59488,#59438,#59496,.T.); +#59496 = LINE('',#59497,#59498); +#59497 = CARTESIAN_POINT('',(-2.725,-1.425,1.4)); +#59498 = VECTOR('',#59499,1.); +#59499 = DIRECTION('',(0.,1.,0.)); +#59500 = ORIENTED_EDGE('',*,*,#59446,.F.); +#59501 = PLANE('',#59502); +#59502 = AXIS2_PLACEMENT_3D('',#59503,#59504,#59505); +#59503 = CARTESIAN_POINT('',(-2.725,-1.425,1.2)); +#59504 = DIRECTION('',(-1.,0.,0.)); +#59505 = DIRECTION('',(0.,1.,0.)); +#59506 = ADVANCED_FACE('',(#59507),#59525,.F.); +#59507 = FACE_BOUND('',#59508,.F.); +#59508 = EDGE_LOOP('',(#59509,#59510,#59511,#59519)); +#59509 = ORIENTED_EDGE('',*,*,#58919,.F.); +#59510 = ORIENTED_EDGE('',*,*,#59462,.T.); +#59511 = ORIENTED_EDGE('',*,*,#59512,.T.); +#59512 = EDGE_CURVE('',#59463,#59513,#59515,.T.); +#59513 = VERTEX_POINT('',#59514); +#59514 = CARTESIAN_POINT('',(2.725,0.75,1.4)); +#59515 = LINE('',#59516,#59517); +#59516 = CARTESIAN_POINT('',(2.725,1.425,1.4)); +#59517 = VECTOR('',#59518,1.); +#59518 = DIRECTION('',(0.,-1.,0.)); +#59519 = ORIENTED_EDGE('',*,*,#59520,.F.); +#59520 = EDGE_CURVE('',#58911,#59513,#59521,.T.); +#59521 = LINE('',#59522,#59523); +#59522 = CARTESIAN_POINT('',(2.725,0.75,1.2)); +#59523 = VECTOR('',#59524,1.); +#59524 = DIRECTION('',(0.,0.,1.)); +#59525 = PLANE('',#59526); +#59526 = AXIS2_PLACEMENT_3D('',#59527,#59528,#59529); +#59527 = CARTESIAN_POINT('',(2.725,1.425,1.2)); +#59528 = DIRECTION('',(1.,0.,0.)); +#59529 = DIRECTION('',(0.,-1.,0.)); +#59530 = ADVANCED_FACE('',(#59531),#59550,.T.); +#59531 = FACE_BOUND('',#59532,.T.); +#59532 = EDGE_LOOP('',(#59533,#59534,#59543,#59549)); +#59533 = ORIENTED_EDGE('',*,*,#59487,.T.); +#59534 = ORIENTED_EDGE('',*,*,#59535,.T.); +#59535 = EDGE_CURVE('',#59488,#59536,#59538,.T.); +#59536 = VERTEX_POINT('',#59537); +#59537 = CARTESIAN_POINT('',(-2.85,-1.425,1.4)); +#59538 = CIRCLE('',#59539,0.125); +#59539 = AXIS2_PLACEMENT_3D('',#59540,#59541,#59542); +#59540 = CARTESIAN_POINT('',(-2.85,-1.3,1.4)); +#59541 = DIRECTION('',(-0.,-0.,-1.)); +#59542 = DIRECTION('',(0.,-1.,0.)); +#59543 = ORIENTED_EDGE('',*,*,#59544,.F.); +#59544 = EDGE_CURVE('',#58794,#59536,#59545,.T.); +#59545 = LINE('',#59546,#59547); +#59546 = CARTESIAN_POINT('',(-2.85,-1.425,1.2)); +#59547 = VECTOR('',#59548,1.); +#59548 = DIRECTION('',(0.,0.,1.)); +#59549 = ORIENTED_EDGE('',*,*,#58793,.F.); +#59550 = CYLINDRICAL_SURFACE('',#59551,0.125); +#59551 = AXIS2_PLACEMENT_3D('',#59552,#59553,#59554); +#59552 = CARTESIAN_POINT('',(-2.85,-1.3,1.2)); +#59553 = DIRECTION('',(0.,0.,1.)); +#59554 = DIRECTION('',(1.,0.,-0.)); +#59555 = ADVANCED_FACE('',(#59556),#59575,.T.); +#59556 = FACE_BOUND('',#59557,.T.); +#59557 = EDGE_LOOP('',(#59558,#59559,#59567,#59574)); +#59558 = ORIENTED_EDGE('',*,*,#58910,.T.); +#59559 = ORIENTED_EDGE('',*,*,#59560,.T.); +#59560 = EDGE_CURVE('',#58903,#59561,#59563,.T.); +#59561 = VERTEX_POINT('',#59562); +#59562 = CARTESIAN_POINT('',(2.85,0.625,1.4)); +#59563 = LINE('',#59564,#59565); +#59564 = CARTESIAN_POINT('',(2.85,0.625,1.2)); +#59565 = VECTOR('',#59566,1.); +#59566 = DIRECTION('',(0.,0.,1.)); +#59567 = ORIENTED_EDGE('',*,*,#59568,.F.); +#59568 = EDGE_CURVE('',#59513,#59561,#59569,.T.); +#59569 = CIRCLE('',#59570,0.125); +#59570 = AXIS2_PLACEMENT_3D('',#59571,#59572,#59573); +#59571 = CARTESIAN_POINT('',(2.85,0.75,1.4)); +#59572 = DIRECTION('',(-0.,0.,1.)); +#59573 = DIRECTION('',(0.,-1.,0.)); +#59574 = ORIENTED_EDGE('',*,*,#59520,.F.); +#59575 = CYLINDRICAL_SURFACE('',#59576,0.125); +#59576 = AXIS2_PLACEMENT_3D('',#59577,#59578,#59579); +#59577 = CARTESIAN_POINT('',(2.85,0.75,1.2)); +#59578 = DIRECTION('',(0.,0.,1.)); +#59579 = DIRECTION('',(-1.,0.,0.)); +#59580 = ADVANCED_FACE('',(#59581),#59599,.F.); +#59581 = FACE_BOUND('',#59582,.F.); +#59582 = EDGE_LOOP('',(#59583,#59584,#59592,#59598)); +#59583 = ORIENTED_EDGE('',*,*,#58802,.F.); +#59584 = ORIENTED_EDGE('',*,*,#59585,.T.); +#59585 = EDGE_CURVE('',#58803,#59586,#59588,.T.); +#59586 = VERTEX_POINT('',#59587); +#59587 = CARTESIAN_POINT('',(-3.05,-1.425,1.4)); +#59588 = LINE('',#59589,#59590); +#59589 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#59590 = VECTOR('',#59591,1.); +#59591 = DIRECTION('',(0.,0.,1.)); +#59592 = ORIENTED_EDGE('',*,*,#59593,.T.); +#59593 = EDGE_CURVE('',#59586,#59536,#59594,.T.); +#59594 = LINE('',#59595,#59596); +#59595 = CARTESIAN_POINT('',(-3.05,-1.425,1.4)); +#59596 = VECTOR('',#59597,1.); +#59597 = DIRECTION('',(1.,0.,0.)); +#59598 = ORIENTED_EDGE('',*,*,#59544,.F.); +#59599 = PLANE('',#59600); +#59600 = AXIS2_PLACEMENT_3D('',#59601,#59602,#59603); +#59601 = CARTESIAN_POINT('',(-3.05,-1.425,1.2)); +#59602 = DIRECTION('',(0.,1.,0.)); +#59603 = DIRECTION('',(1.,0.,0.)); +#59604 = ADVANCED_FACE('',(#59605),#59623,.F.); +#59605 = FACE_BOUND('',#59606,.F.); +#59606 = EDGE_LOOP('',(#59607,#59608,#59609,#59617)); +#59607 = ORIENTED_EDGE('',*,*,#58902,.F.); +#59608 = ORIENTED_EDGE('',*,*,#59560,.T.); +#59609 = ORIENTED_EDGE('',*,*,#59610,.T.); +#59610 = EDGE_CURVE('',#59561,#59611,#59613,.T.); +#59611 = VERTEX_POINT('',#59612); +#59612 = CARTESIAN_POINT('',(3.05,0.625,1.4)); +#59613 = LINE('',#59614,#59615); +#59614 = CARTESIAN_POINT('',(2.725,0.625,1.4)); +#59615 = VECTOR('',#59616,1.); +#59616 = DIRECTION('',(1.,0.,0.)); +#59617 = ORIENTED_EDGE('',*,*,#59618,.F.); +#59618 = EDGE_CURVE('',#58895,#59611,#59619,.T.); +#59619 = LINE('',#59620,#59621); +#59620 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#59621 = VECTOR('',#59622,1.); +#59622 = DIRECTION('',(0.,0.,1.)); +#59623 = PLANE('',#59624); +#59624 = AXIS2_PLACEMENT_3D('',#59625,#59626,#59627); +#59625 = CARTESIAN_POINT('',(2.725,0.625,1.2)); +#59626 = DIRECTION('',(0.,1.,0.)); +#59627 = DIRECTION('',(1.,0.,0.)); +#59628 = ADVANCED_FACE('',(#59629),#59648,.T.); +#59629 = FACE_BOUND('',#59630,.T.); +#59630 = EDGE_LOOP('',(#59631,#59640,#59646,#59647)); +#59631 = ORIENTED_EDGE('',*,*,#59632,.T.); +#59632 = EDGE_CURVE('',#59051,#59633,#59635,.T.); +#59633 = VERTEX_POINT('',#59634); +#59634 = CARTESIAN_POINT('',(-2.9,-1.65,0.7)); +#59635 = CIRCLE('',#59636,0.15); +#59636 = AXIS2_PLACEMENT_3D('',#59637,#59638,#59639); +#59637 = CARTESIAN_POINT('',(-2.9,-1.5,0.7)); +#59638 = DIRECTION('',(-0.,0.,1.)); +#59639 = DIRECTION('',(0.,-1.,0.)); +#59640 = ORIENTED_EDGE('',*,*,#59641,.T.); +#59641 = EDGE_CURVE('',#59633,#58819,#59642,.T.); +#59642 = LINE('',#59643,#59644); +#59643 = CARTESIAN_POINT('',(-2.9,-1.65,0.7)); +#59644 = VECTOR('',#59645,1.); +#59645 = DIRECTION('',(0.,0.,1.)); +#59646 = ORIENTED_EDGE('',*,*,#58818,.F.); +#59647 = ORIENTED_EDGE('',*,*,#59058,.F.); +#59648 = CYLINDRICAL_SURFACE('',#59649,0.15); +#59649 = AXIS2_PLACEMENT_3D('',#59650,#59651,#59652); +#59650 = CARTESIAN_POINT('',(-2.9,-1.5,0.7)); +#59651 = DIRECTION('',(0.,0.,1.)); +#59652 = DIRECTION('',(-1.,0.,0.)); +#59653 = ADVANCED_FACE('',(#59654),#59679,.F.); +#59654 = FACE_BOUND('',#59655,.T.); +#59655 = EDGE_LOOP('',(#59656,#59657,#59665,#59673)); +#59656 = ORIENTED_EDGE('',*,*,#58886,.F.); +#59657 = ORIENTED_EDGE('',*,*,#59658,.T.); +#59658 = EDGE_CURVE('',#58878,#59659,#59661,.T.); +#59659 = VERTEX_POINT('',#59660); +#59660 = CARTESIAN_POINT('',(2.85,-0.625,1.4)); +#59661 = LINE('',#59662,#59663); +#59662 = CARTESIAN_POINT('',(2.85,-0.625,1.2)); +#59663 = VECTOR('',#59664,1.); +#59664 = DIRECTION('',(0.,0.,1.)); +#59665 = ORIENTED_EDGE('',*,*,#59666,.T.); +#59666 = EDGE_CURVE('',#59659,#59667,#59669,.T.); +#59667 = VERTEX_POINT('',#59668); +#59668 = CARTESIAN_POINT('',(3.05,-0.625,1.4)); +#59669 = LINE('',#59670,#59671); +#59670 = CARTESIAN_POINT('',(2.725,-0.625,1.4)); +#59671 = VECTOR('',#59672,1.); +#59672 = DIRECTION('',(1.,0.,0.)); +#59673 = ORIENTED_EDGE('',*,*,#59674,.F.); +#59674 = EDGE_CURVE('',#58887,#59667,#59675,.T.); +#59675 = LINE('',#59676,#59677); +#59676 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#59677 = VECTOR('',#59678,1.); +#59678 = DIRECTION('',(0.,0.,1.)); +#59679 = PLANE('',#59680); +#59680 = AXIS2_PLACEMENT_3D('',#59681,#59682,#59683); +#59681 = CARTESIAN_POINT('',(2.725,-0.625,1.2)); +#59682 = DIRECTION('',(-0.,-1.,-0.)); +#59683 = DIRECTION('',(-1.,0.,0.)); +#59684 = ADVANCED_FACE('',(#59685),#59735,.T.); +#59685 = FACE_BOUND('',#59686,.T.); +#59686 = EDGE_LOOP('',(#59687,#59697,#59703,#59704,#59705,#59713,#59721, + #59729)); +#59687 = ORIENTED_EDGE('',*,*,#59688,.F.); +#59688 = EDGE_CURVE('',#59689,#59691,#59693,.T.); +#59689 = VERTEX_POINT('',#59690); +#59690 = CARTESIAN_POINT('',(2.9,-1.65,0.7)); +#59691 = VERTEX_POINT('',#59692); +#59692 = CARTESIAN_POINT('',(2.75,-1.65,0.7)); +#59693 = LINE('',#59694,#59695); +#59694 = CARTESIAN_POINT('',(3.05,-1.65,0.7)); +#59695 = VECTOR('',#59696,1.); +#59696 = DIRECTION('',(-1.,0.,0.)); +#59697 = ORIENTED_EDGE('',*,*,#59698,.T.); +#59698 = EDGE_CURVE('',#59689,#58828,#59699,.T.); +#59699 = LINE('',#59700,#59701); +#59700 = CARTESIAN_POINT('',(2.9,-1.65,0.7)); +#59701 = VECTOR('',#59702,1.); +#59702 = DIRECTION('',(0.,0.,1.)); +#59703 = ORIENTED_EDGE('',*,*,#58827,.T.); +#59704 = ORIENTED_EDGE('',*,*,#59641,.F.); +#59705 = ORIENTED_EDGE('',*,*,#59706,.T.); +#59706 = EDGE_CURVE('',#59633,#59707,#59709,.T.); +#59707 = VERTEX_POINT('',#59708); +#59708 = CARTESIAN_POINT('',(-2.75,-1.65,0.7)); +#59709 = LINE('',#59710,#59711); +#59710 = CARTESIAN_POINT('',(-3.05,-1.65,0.7)); +#59711 = VECTOR('',#59712,1.); +#59712 = DIRECTION('',(1.,0.,-0.)); +#59713 = ORIENTED_EDGE('',*,*,#59714,.T.); +#59714 = EDGE_CURVE('',#59707,#59715,#59717,.T.); +#59715 = VERTEX_POINT('',#59716); +#59716 = CARTESIAN_POINT('',(-2.75,-1.65,0.)); +#59717 = LINE('',#59718,#59719); +#59718 = CARTESIAN_POINT('',(-2.75,-1.65,0.7)); +#59719 = VECTOR('',#59720,1.); +#59720 = DIRECTION('',(0.,0.,-1.)); +#59721 = ORIENTED_EDGE('',*,*,#59722,.F.); +#59722 = EDGE_CURVE('',#59723,#59715,#59725,.T.); +#59723 = VERTEX_POINT('',#59724); +#59724 = CARTESIAN_POINT('',(2.75,-1.65,0.)); +#59725 = LINE('',#59726,#59727); +#59726 = CARTESIAN_POINT('',(3.05,-1.65,0.)); +#59727 = VECTOR('',#59728,1.); +#59728 = DIRECTION('',(-1.,0.,0.)); +#59729 = ORIENTED_EDGE('',*,*,#59730,.F.); +#59730 = EDGE_CURVE('',#59691,#59723,#59731,.T.); +#59731 = LINE('',#59732,#59733); +#59732 = CARTESIAN_POINT('',(2.75,-1.65,0.7)); +#59733 = VECTOR('',#59734,1.); +#59734 = DIRECTION('',(-0.,-0.,-1.)); +#59735 = PLANE('',#59736); +#59736 = AXIS2_PLACEMENT_3D('',#59737,#59738,#59739); +#59737 = CARTESIAN_POINT('',(3.05,-1.65,0.)); +#59738 = DIRECTION('',(0.,-1.,0.)); +#59739 = DIRECTION('',(-1.,0.,0.)); +#59740 = ADVANCED_FACE('',(#59741),#59760,.T.); +#59741 = FACE_BOUND('',#59742,.T.); +#59742 = EDGE_LOOP('',(#59743,#59744,#59752,#59759)); +#59743 = ORIENTED_EDGE('',*,*,#58877,.T.); +#59744 = ORIENTED_EDGE('',*,*,#59745,.T.); +#59745 = EDGE_CURVE('',#58870,#59746,#59748,.T.); +#59746 = VERTEX_POINT('',#59747); +#59747 = CARTESIAN_POINT('',(2.725,-0.75,1.4)); +#59748 = LINE('',#59749,#59750); +#59749 = CARTESIAN_POINT('',(2.725,-0.75,1.2)); +#59750 = VECTOR('',#59751,1.); +#59751 = DIRECTION('',(0.,0.,1.)); +#59752 = ORIENTED_EDGE('',*,*,#59753,.F.); +#59753 = EDGE_CURVE('',#59659,#59746,#59754,.T.); +#59754 = CIRCLE('',#59755,0.125); +#59755 = AXIS2_PLACEMENT_3D('',#59756,#59757,#59758); +#59756 = CARTESIAN_POINT('',(2.85,-0.75,1.4)); +#59757 = DIRECTION('',(-0.,0.,1.)); +#59758 = DIRECTION('',(0.,-1.,0.)); +#59759 = ORIENTED_EDGE('',*,*,#59658,.F.); +#59760 = CYLINDRICAL_SURFACE('',#59761,0.125); +#59761 = AXIS2_PLACEMENT_3D('',#59762,#59763,#59764); +#59762 = CARTESIAN_POINT('',(2.85,-0.75,1.2)); +#59763 = DIRECTION('',(0.,0.,1.)); +#59764 = DIRECTION('',(0.,1.,0.)); +#59765 = ADVANCED_FACE('',(#59766),#59778,.T.); +#59766 = FACE_BOUND('',#59767,.T.); +#59767 = EDGE_LOOP('',(#59768,#59769,#59770,#59771)); +#59768 = ORIENTED_EDGE('',*,*,#59304,.T.); +#59769 = ORIENTED_EDGE('',*,*,#58835,.T.); +#59770 = ORIENTED_EDGE('',*,*,#59698,.F.); +#59771 = ORIENTED_EDGE('',*,*,#59772,.F.); +#59772 = EDGE_CURVE('',#59305,#59689,#59773,.T.); +#59773 = CIRCLE('',#59774,0.15); +#59774 = AXIS2_PLACEMENT_3D('',#59775,#59776,#59777); +#59775 = CARTESIAN_POINT('',(2.9,-1.5,0.7)); +#59776 = DIRECTION('',(-0.,-0.,-1.)); +#59777 = DIRECTION('',(0.,-1.,0.)); +#59778 = CYLINDRICAL_SURFACE('',#59779,0.15); +#59779 = AXIS2_PLACEMENT_3D('',#59780,#59781,#59782); +#59780 = CARTESIAN_POINT('',(2.9,-1.5,0.7)); +#59781 = DIRECTION('',(0.,0.,1.)); +#59782 = DIRECTION('',(1.,0.,-0.)); +#59783 = ADVANCED_FACE('',(#59784),#59802,.F.); +#59784 = FACE_BOUND('',#59785,.T.); +#59785 = EDGE_LOOP('',(#59786,#59787,#59795,#59801)); +#59786 = ORIENTED_EDGE('',*,*,#58869,.F.); +#59787 = ORIENTED_EDGE('',*,*,#59788,.T.); +#59788 = EDGE_CURVE('',#58861,#59789,#59791,.T.); +#59789 = VERTEX_POINT('',#59790); +#59790 = CARTESIAN_POINT('',(2.725,-1.3,1.4)); +#59791 = LINE('',#59792,#59793); +#59792 = CARTESIAN_POINT('',(2.725,-1.3,1.2)); +#59793 = VECTOR('',#59794,1.); +#59794 = DIRECTION('',(0.,0.,1.)); +#59795 = ORIENTED_EDGE('',*,*,#59796,.T.); +#59796 = EDGE_CURVE('',#59789,#59746,#59797,.T.); +#59797 = LINE('',#59798,#59799); +#59798 = CARTESIAN_POINT('',(2.725,-1.425,1.4)); +#59799 = VECTOR('',#59800,1.); +#59800 = DIRECTION('',(0.,1.,0.)); +#59801 = ORIENTED_EDGE('',*,*,#59745,.F.); +#59802 = PLANE('',#59803); +#59803 = AXIS2_PLACEMENT_3D('',#59804,#59805,#59806); +#59804 = CARTESIAN_POINT('',(2.725,-1.425,1.2)); +#59805 = DIRECTION('',(1.,0.,0.)); +#59806 = DIRECTION('',(0.,-1.,0.)); +#59807 = ADVANCED_FACE('',(#59808),#59827,.T.); +#59808 = FACE_BOUND('',#59809,.T.); +#59809 = EDGE_LOOP('',(#59810,#59811,#59819,#59826)); +#59810 = ORIENTED_EDGE('',*,*,#58860,.T.); +#59811 = ORIENTED_EDGE('',*,*,#59812,.T.); +#59812 = EDGE_CURVE('',#58853,#59813,#59815,.T.); +#59813 = VERTEX_POINT('',#59814); +#59814 = CARTESIAN_POINT('',(2.85,-1.425,1.4)); +#59815 = LINE('',#59816,#59817); +#59816 = CARTESIAN_POINT('',(2.85,-1.425,1.2)); +#59817 = VECTOR('',#59818,1.); +#59818 = DIRECTION('',(0.,0.,1.)); +#59819 = ORIENTED_EDGE('',*,*,#59820,.F.); +#59820 = EDGE_CURVE('',#59789,#59813,#59821,.T.); +#59821 = CIRCLE('',#59822,0.125); +#59822 = AXIS2_PLACEMENT_3D('',#59823,#59824,#59825); +#59823 = CARTESIAN_POINT('',(2.85,-1.3,1.4)); +#59824 = DIRECTION('',(-0.,0.,1.)); +#59825 = DIRECTION('',(0.,-1.,0.)); +#59826 = ORIENTED_EDGE('',*,*,#59788,.F.); +#59827 = CYLINDRICAL_SURFACE('',#59828,0.125); +#59828 = AXIS2_PLACEMENT_3D('',#59829,#59830,#59831); +#59829 = CARTESIAN_POINT('',(2.85,-1.3,1.2)); +#59830 = DIRECTION('',(0.,0.,1.)); +#59831 = DIRECTION('',(-1.,0.,0.)); +#59832 = ADVANCED_FACE('',(#59833),#59851,.F.); +#59833 = FACE_BOUND('',#59834,.T.); +#59834 = EDGE_LOOP('',(#59835,#59836,#59844,#59850)); +#59835 = ORIENTED_EDGE('',*,*,#58852,.F.); +#59836 = ORIENTED_EDGE('',*,*,#59837,.T.); +#59837 = EDGE_CURVE('',#58845,#59838,#59840,.T.); +#59838 = VERTEX_POINT('',#59839); +#59839 = CARTESIAN_POINT('',(3.05,-1.425,1.4)); +#59840 = LINE('',#59841,#59842); +#59841 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#59842 = VECTOR('',#59843,1.); +#59843 = DIRECTION('',(0.,0.,1.)); +#59844 = ORIENTED_EDGE('',*,*,#59845,.T.); +#59845 = EDGE_CURVE('',#59838,#59813,#59846,.T.); +#59846 = LINE('',#59847,#59848); +#59847 = CARTESIAN_POINT('',(3.05,-1.425,1.4)); +#59848 = VECTOR('',#59849,1.); +#59849 = DIRECTION('',(-1.,-0.,-0.)); +#59850 = ORIENTED_EDGE('',*,*,#59812,.F.); +#59851 = PLANE('',#59852); +#59852 = AXIS2_PLACEMENT_3D('',#59853,#59854,#59855); +#59853 = CARTESIAN_POINT('',(3.05,-1.425,1.2)); +#59854 = DIRECTION('',(0.,1.,0.)); +#59855 = DIRECTION('',(1.,0.,0.)); +#59856 = ADVANCED_FACE('',(#59857),#59868,.F.); +#59857 = FACE_BOUND('',#59858,.T.); +#59858 = EDGE_LOOP('',(#59859,#59860,#59866,#59867)); +#59859 = ORIENTED_EDGE('',*,*,#59265,.T.); +#59860 = ORIENTED_EDGE('',*,*,#59861,.T.); +#59861 = EDGE_CURVE('',#59258,#58994,#59862,.T.); +#59862 = LINE('',#59863,#59864); +#59863 = CARTESIAN_POINT('',(-3.05,0.625,1.4)); +#59864 = VECTOR('',#59865,1.); +#59865 = DIRECTION('',(0.,1.,0.)); +#59866 = ORIENTED_EDGE('',*,*,#58993,.F.); +#59867 = ORIENTED_EDGE('',*,*,#59072,.F.); +#59868 = PLANE('',#59869); +#59869 = AXIS2_PLACEMENT_3D('',#59870,#59871,#59872); +#59870 = CARTESIAN_POINT('',(-3.05,0.625,1.2)); +#59871 = DIRECTION('',(1.,0.,0.)); +#59872 = DIRECTION('',(0.,-1.,0.)); +#59873 = ADVANCED_FACE('',(#59874),#59882,.T.); +#59874 = FACE_BOUND('',#59875,.F.); +#59875 = EDGE_LOOP('',(#59876,#59877,#59878,#59879,#59880,#59881)); +#59876 = ORIENTED_EDGE('',*,*,#59001,.T.); +#59877 = ORIENTED_EDGE('',*,*,#59024,.T.); +#59878 = ORIENTED_EDGE('',*,*,#59127,.T.); +#59879 = ORIENTED_EDGE('',*,*,#59175,.T.); +#59880 = ORIENTED_EDGE('',*,*,#59257,.T.); +#59881 = ORIENTED_EDGE('',*,*,#59861,.T.); +#59882 = PLANE('',#59883); +#59883 = AXIS2_PLACEMENT_3D('',#59884,#59885,#59886); +#59884 = CARTESIAN_POINT('',(-2.8875,1.025,1.4)); +#59885 = DIRECTION('',(0.,0.,1.)); +#59886 = DIRECTION('',(1.,0.,-0.)); +#59887 = ADVANCED_FACE('',(#59888),#59907,.T.); +#59888 = FACE_BOUND('',#59889,.T.); +#59889 = EDGE_LOOP('',(#59890,#59891,#59892,#59893,#59901)); +#59890 = ORIENTED_EDGE('',*,*,#59706,.F.); +#59891 = ORIENTED_EDGE('',*,*,#59632,.F.); +#59892 = ORIENTED_EDGE('',*,*,#59048,.F.); +#59893 = ORIENTED_EDGE('',*,*,#59894,.T.); +#59894 = EDGE_CURVE('',#59049,#59895,#59897,.T.); +#59895 = VERTEX_POINT('',#59896); +#59896 = CARTESIAN_POINT('',(-2.75,-0.75,0.7)); +#59897 = LINE('',#59898,#59899); +#59898 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59899 = VECTOR('',#59900,1.); +#59900 = DIRECTION('',(1.,0.,-0.)); +#59901 = ORIENTED_EDGE('',*,*,#59902,.T.); +#59902 = EDGE_CURVE('',#59895,#59707,#59903,.T.); +#59903 = LINE('',#59904,#59905); +#59904 = CARTESIAN_POINT('',(-2.75,-0.75,0.7)); +#59905 = VECTOR('',#59906,1.); +#59906 = DIRECTION('',(0.,-1.,0.)); +#59907 = PLANE('',#59908); +#59908 = AXIS2_PLACEMENT_3D('',#59909,#59910,#59911); +#59909 = CARTESIAN_POINT('',(-3.05,-0.75,0.7)); +#59910 = DIRECTION('',(0.,0.,-1.)); +#59911 = DIRECTION('',(0.,-1.,0.)); +#59912 = ADVANCED_FACE('',(#59913),#59947,.T.); +#59913 = FACE_BOUND('',#59914,.T.); +#59914 = EDGE_LOOP('',(#59915,#59925,#59933,#59939,#59940,#59941)); +#59915 = ORIENTED_EDGE('',*,*,#59916,.F.); +#59916 = EDGE_CURVE('',#59917,#59919,#59921,.T.); +#59917 = VERTEX_POINT('',#59918); +#59918 = CARTESIAN_POINT('',(-3.,-0.75,-1.E-15)); +#59919 = VERTEX_POINT('',#59920); +#59920 = CARTESIAN_POINT('',(-3.,-0.75,0.3)); +#59921 = LINE('',#59922,#59923); +#59922 = CARTESIAN_POINT('',(-3.,-0.75,-6.7E-16)); +#59923 = VECTOR('',#59924,1.); +#59924 = DIRECTION('',(-2.2E-16,0.,1.)); +#59925 = ORIENTED_EDGE('',*,*,#59926,.T.); +#59926 = EDGE_CURVE('',#59917,#59927,#59929,.T.); +#59927 = VERTEX_POINT('',#59928); +#59928 = CARTESIAN_POINT('',(-2.75,-0.75,0.)); +#59929 = LINE('',#59930,#59931); +#59930 = CARTESIAN_POINT('',(-3.05,-0.75,0.)); +#59931 = VECTOR('',#59932,1.); +#59932 = DIRECTION('',(1.,0.,-0.)); +#59933 = ORIENTED_EDGE('',*,*,#59934,.T.); +#59934 = EDGE_CURVE('',#59927,#59895,#59935,.T.); +#59935 = LINE('',#59936,#59937); +#59936 = CARTESIAN_POINT('',(-2.75,-0.75,0.)); +#59937 = VECTOR('',#59938,1.); +#59938 = DIRECTION('',(0.,0.,1.)); +#59939 = ORIENTED_EDGE('',*,*,#59894,.F.); +#59940 = ORIENTED_EDGE('',*,*,#59111,.F.); +#59941 = ORIENTED_EDGE('',*,*,#59942,.T.); +#59942 = EDGE_CURVE('',#59104,#59919,#59943,.T.); +#59943 = LINE('',#59944,#59945); +#59944 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59945 = VECTOR('',#59946,1.); +#59946 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#59947 = PLANE('',#59948); +#59948 = AXIS2_PLACEMENT_3D('',#59949,#59950,#59951); +#59949 = CARTESIAN_POINT('',(-3.05,-0.75,0.)); +#59950 = DIRECTION('',(0.,-1.,0.)); +#59951 = DIRECTION('',(0.,0.,1.)); +#59952 = ADVANCED_FACE('',(#59953),#59971,.T.); +#59953 = FACE_BOUND('',#59954,.F.); +#59954 = EDGE_LOOP('',(#59955,#59956,#59964,#59970)); +#59955 = ORIENTED_EDGE('',*,*,#59942,.T.); +#59956 = ORIENTED_EDGE('',*,*,#59957,.T.); +#59957 = EDGE_CURVE('',#59919,#59958,#59960,.T.); +#59958 = VERTEX_POINT('',#59959); +#59959 = CARTESIAN_POINT('',(-3.,0.75,0.3)); +#59960 = LINE('',#59961,#59962); +#59961 = CARTESIAN_POINT('',(-3.,-0.75,0.3)); +#59962 = VECTOR('',#59963,1.); +#59963 = DIRECTION('',(2.2E-16,1.,0.)); +#59964 = ORIENTED_EDGE('',*,*,#59965,.F.); +#59965 = EDGE_CURVE('',#59096,#59958,#59966,.T.); +#59966 = LINE('',#59967,#59968); +#59967 = CARTESIAN_POINT('',(-3.05,0.75,0.3)); +#59968 = VECTOR('',#59969,1.); +#59969 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#59970 = ORIENTED_EDGE('',*,*,#59103,.F.); +#59971 = PLANE('',#59972); +#59972 = AXIS2_PLACEMENT_3D('',#59973,#59974,#59975); +#59973 = CARTESIAN_POINT('',(-3.05,-0.75,0.3)); +#59974 = DIRECTION('',(2.2E-16,0.,-1.)); +#59975 = DIRECTION('',(-2.2E-16,-1.,-4.84E-32)); +#59976 = ADVANCED_FACE('',(#59977),#60011,.T.); +#59977 = FACE_BOUND('',#59978,.F.); +#59978 = EDGE_LOOP('',(#59979,#59987,#59995,#60003,#60009,#60010)); +#59979 = ORIENTED_EDGE('',*,*,#59980,.T.); +#59980 = EDGE_CURVE('',#59958,#59981,#59983,.T.); +#59981 = VERTEX_POINT('',#59982); +#59982 = CARTESIAN_POINT('',(-3.,0.75,-1.E-15)); +#59983 = LINE('',#59984,#59985); +#59984 = CARTESIAN_POINT('',(-3.,0.75,0.3)); +#59985 = VECTOR('',#59986,1.); +#59986 = DIRECTION('',(2.2E-16,0.,-1.)); +#59987 = ORIENTED_EDGE('',*,*,#59988,.T.); +#59988 = EDGE_CURVE('',#59981,#59989,#59991,.T.); +#59989 = VERTEX_POINT('',#59990); +#59990 = CARTESIAN_POINT('',(-2.75,0.75,0.)); +#59991 = LINE('',#59992,#59993); +#59992 = CARTESIAN_POINT('',(-3.05,0.75,0.)); +#59993 = VECTOR('',#59994,1.); +#59994 = DIRECTION('',(1.,0.,0.)); +#59995 = ORIENTED_EDGE('',*,*,#59996,.T.); +#59996 = EDGE_CURVE('',#59989,#59997,#59999,.T.); +#59997 = VERTEX_POINT('',#59998); +#59998 = CARTESIAN_POINT('',(-2.75,0.75,0.7)); +#59999 = LINE('',#60000,#60001); +#60000 = CARTESIAN_POINT('',(-2.75,0.75,0.)); +#60001 = VECTOR('',#60002,1.); +#60002 = DIRECTION('',(0.,0.,1.)); +#60003 = ORIENTED_EDGE('',*,*,#60004,.F.); +#60004 = EDGE_CURVE('',#59088,#59997,#60005,.T.); +#60005 = LINE('',#60006,#60007); +#60006 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#60007 = VECTOR('',#60008,1.); +#60008 = DIRECTION('',(1.,0.,0.)); +#60009 = ORIENTED_EDGE('',*,*,#59095,.F.); +#60010 = ORIENTED_EDGE('',*,*,#59965,.T.); +#60011 = PLANE('',#60012); +#60012 = AXIS2_PLACEMENT_3D('',#60013,#60014,#60015); +#60013 = CARTESIAN_POINT('',(-3.05,0.75,0.)); +#60014 = DIRECTION('',(0.,1.,0.)); +#60015 = DIRECTION('',(0.,0.,-1.)); +#60016 = ADVANCED_FACE('',(#60017),#60029,.T.); +#60017 = FACE_BOUND('',#60018,.F.); +#60018 = EDGE_LOOP('',(#60019,#60020,#60021,#60022,#60023)); +#60019 = ORIENTED_EDGE('',*,*,#59233,.F.); +#60020 = ORIENTED_EDGE('',*,*,#59149,.T.); +#60021 = ORIENTED_EDGE('',*,*,#59087,.F.); +#60022 = ORIENTED_EDGE('',*,*,#60004,.T.); +#60023 = ORIENTED_EDGE('',*,*,#60024,.T.); +#60024 = EDGE_CURVE('',#59997,#59226,#60025,.T.); +#60025 = LINE('',#60026,#60027); +#60026 = CARTESIAN_POINT('',(-2.75,0.75,0.7)); +#60027 = VECTOR('',#60028,1.); +#60028 = DIRECTION('',(0.,1.,0.)); +#60029 = PLANE('',#60030); +#60030 = AXIS2_PLACEMENT_3D('',#60031,#60032,#60033); +#60031 = CARTESIAN_POINT('',(-3.05,0.75,0.7)); +#60032 = DIRECTION('',(-0.,-0.,-1.)); +#60033 = DIRECTION('',(0.,-1.,0.)); +#60034 = ADVANCED_FACE('',(#60035),#60046,.F.); +#60035 = FACE_BOUND('',#60036,.F.); +#60036 = EDGE_LOOP('',(#60037,#60038,#60044,#60045)); +#60037 = ORIENTED_EDGE('',*,*,#59391,.T.); +#60038 = ORIENTED_EDGE('',*,*,#60039,.T.); +#60039 = EDGE_CURVE('',#59384,#59586,#60040,.T.); +#60040 = LINE('',#60041,#60042); +#60041 = CARTESIAN_POINT('',(-3.05,-0.625,1.4)); +#60042 = VECTOR('',#60043,1.); +#60043 = DIRECTION('',(0.,-1.,0.)); +#60044 = ORIENTED_EDGE('',*,*,#59585,.F.); +#60045 = ORIENTED_EDGE('',*,*,#59065,.F.); +#60046 = PLANE('',#60047); +#60047 = AXIS2_PLACEMENT_3D('',#60048,#60049,#60050); +#60048 = CARTESIAN_POINT('',(-3.05,-0.625,1.2)); +#60049 = DIRECTION('',(1.,0.,0.)); +#60050 = DIRECTION('',(0.,-1.,0.)); +#60051 = ADVANCED_FACE('',(#60052),#60071,.T.); +#60052 = FACE_BOUND('',#60053,.T.); +#60053 = EDGE_LOOP('',(#60054,#60055,#60056,#60057,#60065)); +#60054 = ORIENTED_EDGE('',*,*,#59199,.F.); +#60055 = ORIENTED_EDGE('',*,*,#59289,.T.); +#60056 = ORIENTED_EDGE('',*,*,#59344,.F.); +#60057 = ORIENTED_EDGE('',*,*,#60058,.T.); +#60058 = EDGE_CURVE('',#59337,#60059,#60061,.T.); +#60059 = VERTEX_POINT('',#60060); +#60060 = CARTESIAN_POINT('',(2.75,0.75,0.7)); +#60061 = LINE('',#60062,#60063); +#60062 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#60063 = VECTOR('',#60064,1.); +#60064 = DIRECTION('',(-1.,-0.,-0.)); +#60065 = ORIENTED_EDGE('',*,*,#60066,.T.); +#60066 = EDGE_CURVE('',#60059,#59202,#60067,.T.); +#60067 = LINE('',#60068,#60069); +#60068 = CARTESIAN_POINT('',(2.75,0.75,0.7)); +#60069 = VECTOR('',#60070,1.); +#60070 = DIRECTION('',(0.,1.,0.)); +#60071 = PLANE('',#60072); +#60072 = AXIS2_PLACEMENT_3D('',#60073,#60074,#60075); +#60073 = CARTESIAN_POINT('',(3.05,0.75,0.7)); +#60074 = DIRECTION('',(0.,0.,-1.)); +#60075 = DIRECTION('',(0.,1.,0.)); +#60076 = ADVANCED_FACE('',(#60077),#60095,.T.); +#60077 = FACE_BOUND('',#60078,.F.); +#60078 = EDGE_LOOP('',(#60079,#60080,#60081,#60089)); +#60079 = ORIENTED_EDGE('',*,*,#60066,.T.); +#60080 = ORIENTED_EDGE('',*,*,#59209,.T.); +#60081 = ORIENTED_EDGE('',*,*,#60082,.T.); +#60082 = EDGE_CURVE('',#59210,#60083,#60085,.T.); +#60083 = VERTEX_POINT('',#60084); +#60084 = CARTESIAN_POINT('',(2.75,0.75,0.)); +#60085 = LINE('',#60086,#60087); +#60086 = CARTESIAN_POINT('',(2.75,1.65,0.)); +#60087 = VECTOR('',#60088,1.); +#60088 = DIRECTION('',(0.,-1.,0.)); +#60089 = ORIENTED_EDGE('',*,*,#60090,.T.); +#60090 = EDGE_CURVE('',#60083,#60059,#60091,.T.); +#60091 = LINE('',#60092,#60093); +#60092 = CARTESIAN_POINT('',(2.75,0.75,0.)); +#60093 = VECTOR('',#60094,1.); +#60094 = DIRECTION('',(0.,0.,1.)); +#60095 = PLANE('',#60096); +#60096 = AXIS2_PLACEMENT_3D('',#60097,#60098,#60099); +#60097 = CARTESIAN_POINT('',(2.75,1.2,0.35)); +#60098 = DIRECTION('',(1.,0.,0.)); +#60099 = DIRECTION('',(-0.,1.,0.)); +#60100 = ADVANCED_FACE('',(#60101),#60156,.F.); +#60101 = FACE_BOUND('',#60102,.F.); +#60102 = EDGE_LOOP('',(#60103,#60104,#60110,#60111,#60117,#60118,#60124, + #60125,#60133,#60141,#60149,#60155)); +#60103 = ORIENTED_EDGE('',*,*,#59217,.F.); +#60104 = ORIENTED_EDGE('',*,*,#60105,.T.); +#60105 = EDGE_CURVE('',#59218,#59989,#60106,.T.); +#60106 = LINE('',#60107,#60108); +#60107 = CARTESIAN_POINT('',(-2.75,1.65,0.)); +#60108 = VECTOR('',#60109,1.); +#60109 = DIRECTION('',(-0.,-1.,-0.)); +#60110 = ORIENTED_EDGE('',*,*,#59988,.F.); +#60111 = ORIENTED_EDGE('',*,*,#60112,.T.); +#60112 = EDGE_CURVE('',#59981,#59917,#60113,.T.); +#60113 = LINE('',#60114,#60115); +#60114 = CARTESIAN_POINT('',(-3.,0.75,-6.7E-16)); +#60115 = VECTOR('',#60116,1.); +#60116 = DIRECTION('',(-2.2E-16,-1.,-0.)); +#60117 = ORIENTED_EDGE('',*,*,#59926,.T.); +#60118 = ORIENTED_EDGE('',*,*,#60119,.F.); +#60119 = EDGE_CURVE('',#59715,#59927,#60120,.T.); +#60120 = LINE('',#60121,#60122); +#60121 = CARTESIAN_POINT('',(-2.75,-1.65,0.)); +#60122 = VECTOR('',#60123,1.); +#60123 = DIRECTION('',(0.,1.,0.)); +#60124 = ORIENTED_EDGE('',*,*,#59722,.F.); +#60125 = ORIENTED_EDGE('',*,*,#60126,.T.); +#60126 = EDGE_CURVE('',#59723,#60127,#60129,.T.); +#60127 = VERTEX_POINT('',#60128); +#60128 = CARTESIAN_POINT('',(2.75,-0.75,0.)); +#60129 = LINE('',#60130,#60131); +#60130 = CARTESIAN_POINT('',(2.75,-1.65,0.)); +#60131 = VECTOR('',#60132,1.); +#60132 = DIRECTION('',(0.,1.,0.)); +#60133 = ORIENTED_EDGE('',*,*,#60134,.F.); +#60134 = EDGE_CURVE('',#60135,#60127,#60137,.T.); +#60135 = VERTEX_POINT('',#60136); +#60136 = CARTESIAN_POINT('',(3.,-0.75,0.)); +#60137 = LINE('',#60138,#60139); +#60138 = CARTESIAN_POINT('',(3.05,-0.75,0.)); +#60139 = VECTOR('',#60140,1.); +#60140 = DIRECTION('',(-1.,0.,0.)); +#60141 = ORIENTED_EDGE('',*,*,#60142,.F.); +#60142 = EDGE_CURVE('',#60143,#60135,#60145,.T.); +#60143 = VERTEX_POINT('',#60144); +#60144 = CARTESIAN_POINT('',(3.,0.75,0.)); +#60145 = LINE('',#60146,#60147); +#60146 = CARTESIAN_POINT('',(3.,0.75,0.)); +#60147 = VECTOR('',#60148,1.); +#60148 = DIRECTION('',(0.,-1.,0.)); +#60149 = ORIENTED_EDGE('',*,*,#60150,.T.); +#60150 = EDGE_CURVE('',#60143,#60083,#60151,.T.); +#60151 = LINE('',#60152,#60153); +#60152 = CARTESIAN_POINT('',(3.05,0.75,0.)); +#60153 = VECTOR('',#60154,1.); +#60154 = DIRECTION('',(-1.,-0.,-0.)); +#60155 = ORIENTED_EDGE('',*,*,#60082,.F.); +#60156 = PLANE('',#60157); +#60157 = AXIS2_PLACEMENT_3D('',#60158,#60159,#60160); +#60158 = CARTESIAN_POINT('',(9.E-17,0.,0.)); +#60159 = DIRECTION('',(0.,0.,1.)); +#60160 = DIRECTION('',(1.,0.,-0.)); +#60161 = ADVANCED_FACE('',(#60162),#60168,.T.); +#60162 = FACE_BOUND('',#60163,.T.); +#60163 = EDGE_LOOP('',(#60164,#60165,#60166,#60167)); +#60164 = ORIENTED_EDGE('',*,*,#60024,.T.); +#60165 = ORIENTED_EDGE('',*,*,#59225,.T.); +#60166 = ORIENTED_EDGE('',*,*,#60105,.T.); +#60167 = ORIENTED_EDGE('',*,*,#59996,.T.); +#60168 = PLANE('',#60169); +#60169 = AXIS2_PLACEMENT_3D('',#60170,#60171,#60172); +#60170 = CARTESIAN_POINT('',(-2.75,1.2,0.35)); +#60171 = DIRECTION('',(-1.,-0.,-0.)); +#60172 = DIRECTION('',(0.,-1.,0.)); +#60173 = ADVANCED_FACE('',(#60174),#60185,.F.); +#60174 = FACE_BOUND('',#60175,.T.); +#60175 = EDGE_LOOP('',(#60176,#60177,#60183,#60184)); +#60176 = ORIENTED_EDGE('',*,*,#59674,.T.); +#60177 = ORIENTED_EDGE('',*,*,#60178,.T.); +#60178 = EDGE_CURVE('',#59667,#59838,#60179,.T.); +#60179 = LINE('',#60180,#60181); +#60180 = CARTESIAN_POINT('',(3.05,-0.625,1.4)); +#60181 = VECTOR('',#60182,1.); +#60182 = DIRECTION('',(-0.,-1.,-0.)); +#60183 = ORIENTED_EDGE('',*,*,#59837,.F.); +#60184 = ORIENTED_EDGE('',*,*,#59359,.F.); +#60185 = PLANE('',#60186); +#60186 = AXIS2_PLACEMENT_3D('',#60187,#60188,#60189); +#60187 = CARTESIAN_POINT('',(3.05,-0.625,1.2)); +#60188 = DIRECTION('',(-1.,-0.,-0.)); +#60189 = DIRECTION('',(0.,1.,0.)); +#60190 = ADVANCED_FACE('',(#60191),#60202,.F.); +#60191 = FACE_BOUND('',#60192,.F.); +#60192 = EDGE_LOOP('',(#60193,#60194,#60200,#60201)); +#60193 = ORIENTED_EDGE('',*,*,#59618,.T.); +#60194 = ORIENTED_EDGE('',*,*,#60195,.T.); +#60195 = EDGE_CURVE('',#59611,#59407,#60196,.T.); +#60196 = LINE('',#60197,#60198); +#60197 = CARTESIAN_POINT('',(3.05,0.625,1.4)); +#60198 = VECTOR('',#60199,1.); +#60199 = DIRECTION('',(0.,1.,0.)); +#60200 = ORIENTED_EDGE('',*,*,#59406,.F.); +#60201 = ORIENTED_EDGE('',*,*,#59352,.F.); +#60202 = PLANE('',#60203); +#60203 = AXIS2_PLACEMENT_3D('',#60204,#60205,#60206); +#60204 = CARTESIAN_POINT('',(3.05,0.625,1.2)); +#60205 = DIRECTION('',(-1.,0.,0.)); +#60206 = DIRECTION('',(0.,1.,0.)); +#60207 = ADVANCED_FACE('',(#60208),#60228,.T.); +#60208 = FACE_BOUND('',#60209,.T.); +#60209 = EDGE_LOOP('',(#60210,#60218,#60219,#60220,#60221,#60222)); +#60210 = ORIENTED_EDGE('',*,*,#60211,.T.); +#60211 = EDGE_CURVE('',#60212,#60143,#60214,.T.); +#60212 = VERTEX_POINT('',#60213); +#60213 = CARTESIAN_POINT('',(3.,0.75,0.3)); +#60214 = LINE('',#60215,#60216); +#60215 = CARTESIAN_POINT('',(3.,0.75,0.3)); +#60216 = VECTOR('',#60217,1.); +#60217 = DIRECTION('',(0.,0.,-1.)); +#60218 = ORIENTED_EDGE('',*,*,#60150,.T.); +#60219 = ORIENTED_EDGE('',*,*,#60090,.T.); +#60220 = ORIENTED_EDGE('',*,*,#60058,.F.); +#60221 = ORIENTED_EDGE('',*,*,#59336,.F.); +#60222 = ORIENTED_EDGE('',*,*,#60223,.T.); +#60223 = EDGE_CURVE('',#59329,#60212,#60224,.T.); +#60224 = LINE('',#60225,#60226); +#60225 = CARTESIAN_POINT('',(3.05,0.75,0.3)); +#60226 = VECTOR('',#60227,1.); +#60227 = DIRECTION('',(-1.,-0.,-0.)); +#60228 = PLANE('',#60229); +#60229 = AXIS2_PLACEMENT_3D('',#60230,#60231,#60232); +#60230 = CARTESIAN_POINT('',(3.05,0.75,0.)); +#60231 = DIRECTION('',(0.,1.,0.)); +#60232 = DIRECTION('',(0.,-0.,1.)); +#60233 = ADVANCED_FACE('',(#60234),#60252,.T.); +#60234 = FACE_BOUND('',#60235,.T.); +#60235 = EDGE_LOOP('',(#60236,#60244,#60250,#60251)); +#60236 = ORIENTED_EDGE('',*,*,#60237,.T.); +#60237 = EDGE_CURVE('',#59321,#60238,#60240,.T.); +#60238 = VERTEX_POINT('',#60239); +#60239 = CARTESIAN_POINT('',(3.,-0.75,0.3)); +#60240 = LINE('',#60241,#60242); +#60241 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#60242 = VECTOR('',#60243,1.); +#60243 = DIRECTION('',(-1.,-0.,-0.)); +#60244 = ORIENTED_EDGE('',*,*,#60245,.T.); +#60245 = EDGE_CURVE('',#60238,#60212,#60246,.T.); +#60246 = LINE('',#60247,#60248); +#60247 = CARTESIAN_POINT('',(3.,-0.75,0.3)); +#60248 = VECTOR('',#60249,1.); +#60249 = DIRECTION('',(0.,1.,0.)); +#60250 = ORIENTED_EDGE('',*,*,#60223,.F.); +#60251 = ORIENTED_EDGE('',*,*,#59328,.F.); +#60252 = PLANE('',#60253); +#60253 = AXIS2_PLACEMENT_3D('',#60254,#60255,#60256); +#60254 = CARTESIAN_POINT('',(3.05,-0.75,0.3)); +#60255 = DIRECTION('',(0.,0.,-1.)); +#60256 = DIRECTION('',(0.,1.,0.)); +#60257 = ADVANCED_FACE('',(#60258),#60283,.T.); +#60258 = FACE_BOUND('',#60259,.F.); +#60259 = EDGE_LOOP('',(#60260,#60266,#60267,#60275,#60281,#60282)); +#60260 = ORIENTED_EDGE('',*,*,#60261,.F.); +#60261 = EDGE_CURVE('',#60135,#60238,#60262,.T.); +#60262 = LINE('',#60263,#60264); +#60263 = CARTESIAN_POINT('',(3.,-0.75,0.)); +#60264 = VECTOR('',#60265,1.); +#60265 = DIRECTION('',(0.,0.,1.)); +#60266 = ORIENTED_EDGE('',*,*,#60134,.T.); +#60267 = ORIENTED_EDGE('',*,*,#60268,.T.); +#60268 = EDGE_CURVE('',#60127,#60269,#60271,.T.); +#60269 = VERTEX_POINT('',#60270); +#60270 = CARTESIAN_POINT('',(2.75,-0.75,0.7)); +#60271 = LINE('',#60272,#60273); +#60272 = CARTESIAN_POINT('',(2.75,-0.75,0.)); +#60273 = VECTOR('',#60274,1.); +#60274 = DIRECTION('',(0.,0.,1.)); +#60275 = ORIENTED_EDGE('',*,*,#60276,.F.); +#60276 = EDGE_CURVE('',#59313,#60269,#60277,.T.); +#60277 = LINE('',#60278,#60279); +#60278 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#60279 = VECTOR('',#60280,1.); +#60280 = DIRECTION('',(-1.,0.,0.)); +#60281 = ORIENTED_EDGE('',*,*,#59320,.F.); +#60282 = ORIENTED_EDGE('',*,*,#60237,.T.); +#60283 = PLANE('',#60284); +#60284 = AXIS2_PLACEMENT_3D('',#60285,#60286,#60287); +#60285 = CARTESIAN_POINT('',(3.05,-0.75,0.)); +#60286 = DIRECTION('',(-0.,-1.,-0.)); +#60287 = DIRECTION('',(0.,0.,-1.)); +#60288 = ADVANCED_FACE('',(#60289),#60301,.T.); +#60289 = FACE_BOUND('',#60290,.F.); +#60290 = EDGE_LOOP('',(#60291,#60292,#60293,#60294,#60295)); +#60291 = ORIENTED_EDGE('',*,*,#59688,.F.); +#60292 = ORIENTED_EDGE('',*,*,#59772,.F.); +#60293 = ORIENTED_EDGE('',*,*,#59312,.F.); +#60294 = ORIENTED_EDGE('',*,*,#60276,.T.); +#60295 = ORIENTED_EDGE('',*,*,#60296,.T.); +#60296 = EDGE_CURVE('',#60269,#59691,#60297,.T.); +#60297 = LINE('',#60298,#60299); +#60298 = CARTESIAN_POINT('',(2.75,-0.75,0.7)); +#60299 = VECTOR('',#60300,1.); +#60300 = DIRECTION('',(-0.,-1.,-0.)); +#60301 = PLANE('',#60302); +#60302 = AXIS2_PLACEMENT_3D('',#60303,#60304,#60305); +#60303 = CARTESIAN_POINT('',(3.05,-0.75,0.7)); +#60304 = DIRECTION('',(-0.,-0.,-1.)); +#60305 = DIRECTION('',(0.,1.,-0.)); +#60306 = ADVANCED_FACE('',(#60307),#60315,.T.); +#60307 = FACE_BOUND('',#60308,.T.); +#60308 = EDGE_LOOP('',(#60309,#60310,#60311,#60312,#60313,#60314)); +#60309 = ORIENTED_EDGE('',*,*,#59593,.T.); +#60310 = ORIENTED_EDGE('',*,*,#59535,.F.); +#60311 = ORIENTED_EDGE('',*,*,#59495,.T.); +#60312 = ORIENTED_EDGE('',*,*,#59437,.F.); +#60313 = ORIENTED_EDGE('',*,*,#59383,.T.); +#60314 = ORIENTED_EDGE('',*,*,#60039,.T.); +#60315 = PLANE('',#60316); +#60316 = AXIS2_PLACEMENT_3D('',#60317,#60318,#60319); +#60317 = CARTESIAN_POINT('',(-2.8875,-1.025,1.4)); +#60318 = DIRECTION('',(0.,0.,1.)); +#60319 = DIRECTION('',(-1.,0.,0.)); +#60320 = ADVANCED_FACE('',(#60321),#60329,.T.); +#60321 = FACE_BOUND('',#60322,.T.); +#60322 = EDGE_LOOP('',(#60323,#60324,#60325,#60326,#60327,#60328)); +#60323 = ORIENTED_EDGE('',*,*,#59414,.T.); +#60324 = ORIENTED_EDGE('',*,*,#59470,.T.); +#60325 = ORIENTED_EDGE('',*,*,#59512,.T.); +#60326 = ORIENTED_EDGE('',*,*,#59568,.T.); +#60327 = ORIENTED_EDGE('',*,*,#59610,.T.); +#60328 = ORIENTED_EDGE('',*,*,#60195,.T.); +#60329 = PLANE('',#60330); +#60330 = AXIS2_PLACEMENT_3D('',#60331,#60332,#60333); +#60331 = CARTESIAN_POINT('',(2.8875,1.025,1.4)); +#60332 = DIRECTION('',(0.,0.,1.)); +#60333 = DIRECTION('',(1.,0.,-0.)); +#60334 = ADVANCED_FACE('',(#60335),#60343,.T.); +#60335 = FACE_BOUND('',#60336,.F.); +#60336 = EDGE_LOOP('',(#60337,#60338,#60339,#60340,#60341,#60342)); +#60337 = ORIENTED_EDGE('',*,*,#59845,.T.); +#60338 = ORIENTED_EDGE('',*,*,#59820,.F.); +#60339 = ORIENTED_EDGE('',*,*,#59796,.T.); +#60340 = ORIENTED_EDGE('',*,*,#59753,.F.); +#60341 = ORIENTED_EDGE('',*,*,#59666,.T.); +#60342 = ORIENTED_EDGE('',*,*,#60178,.T.); +#60343 = PLANE('',#60344); +#60344 = AXIS2_PLACEMENT_3D('',#60345,#60346,#60347); +#60345 = CARTESIAN_POINT('',(2.8875,-1.025,1.4)); +#60346 = DIRECTION('',(0.,0.,1.)); +#60347 = DIRECTION('',(-1.,0.,0.)); +#60348 = ADVANCED_FACE('',(#60349),#60355,.T.); +#60349 = FACE_BOUND('',#60350,.T.); +#60350 = EDGE_LOOP('',(#60351,#60352,#60353,#60354)); +#60351 = ORIENTED_EDGE('',*,*,#60296,.T.); +#60352 = ORIENTED_EDGE('',*,*,#59730,.T.); +#60353 = ORIENTED_EDGE('',*,*,#60126,.T.); +#60354 = ORIENTED_EDGE('',*,*,#60268,.T.); +#60355 = PLANE('',#60356); +#60356 = AXIS2_PLACEMENT_3D('',#60357,#60358,#60359); +#60357 = CARTESIAN_POINT('',(2.75,-1.2,0.35)); +#60358 = DIRECTION('',(1.,0.,0.)); +#60359 = DIRECTION('',(-0.,1.,0.)); +#60360 = ADVANCED_FACE('',(#60361),#60367,.T.); +#60361 = FACE_BOUND('',#60362,.F.); +#60362 = EDGE_LOOP('',(#60363,#60364,#60365,#60366)); +#60363 = ORIENTED_EDGE('',*,*,#59902,.T.); +#60364 = ORIENTED_EDGE('',*,*,#59714,.T.); +#60365 = ORIENTED_EDGE('',*,*,#60119,.T.); +#60366 = ORIENTED_EDGE('',*,*,#59934,.T.); +#60367 = PLANE('',#60368); +#60368 = AXIS2_PLACEMENT_3D('',#60369,#60370,#60371); +#60369 = CARTESIAN_POINT('',(-2.75,-1.2,0.35)); +#60370 = DIRECTION('',(-1.,0.,0.)); +#60371 = DIRECTION('',(0.,-1.,0.)); +#60372 = ADVANCED_FACE('',(#60373),#60379,.T.); +#60373 = FACE_BOUND('',#60374,.T.); +#60374 = EDGE_LOOP('',(#60375,#60376,#60377,#60378)); +#60375 = ORIENTED_EDGE('',*,*,#59957,.T.); +#60376 = ORIENTED_EDGE('',*,*,#59980,.T.); +#60377 = ORIENTED_EDGE('',*,*,#60112,.T.); +#60378 = ORIENTED_EDGE('',*,*,#59916,.T.); +#60379 = PLANE('',#60380); +#60380 = AXIS2_PLACEMENT_3D('',#60381,#60382,#60383); +#60381 = CARTESIAN_POINT('',(-3.,5.4E-16,0.15)); +#60382 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#60383 = DIRECTION('',(2.2E-16,1.741711239665E-48,-1.)); +#60384 = ADVANCED_FACE('',(#60385),#60391,.T.); +#60385 = FACE_BOUND('',#60386,.F.); +#60386 = EDGE_LOOP('',(#60387,#60388,#60389,#60390)); +#60387 = ORIENTED_EDGE('',*,*,#60245,.T.); +#60388 = ORIENTED_EDGE('',*,*,#60211,.T.); +#60389 = ORIENTED_EDGE('',*,*,#60142,.T.); +#60390 = ORIENTED_EDGE('',*,*,#60261,.T.); +#60391 = PLANE('',#60392); +#60392 = AXIS2_PLACEMENT_3D('',#60393,#60394,#60395); +#60393 = CARTESIAN_POINT('',(3.,-1.3E-16,0.15)); +#60394 = DIRECTION('',(1.,0.,0.)); +#60395 = DIRECTION('',(0.,0.,1.)); +#60396 = MANIFOLD_SOLID_BREP('',#60397); +#60397 = CLOSED_SHELL('',(#60398,#60522,#60553,#60578,#60609,#60633, + #60698,#60723,#60748,#60772,#60829,#60854,#60885,#60909,#60940, + #60958,#60982,#61019,#61052,#61076,#61227,#61260,#61277,#61440, + #61473,#61497,#61521,#61554,#61571,#61596,#61613,#61662,#61687, + #61730,#61746,#61786,#61842,#61859,#61884,#61932,#61963,#61988, + #62013,#62037,#62061,#62086,#62111,#62128,#62152,#62168,#62185, + #62228,#62252,#62278,#62321,#62371,#62421,#62452,#62483,#62533, + #62583,#62602,#62619,#62644,#62669,#62718,#62735,#62759,#62776, + #62800,#62825,#62849,#62867,#62889,#62901,#62913,#62935,#62947, + #63048,#63079,#63180,#63192,#63223,#63281,#63316,#63333,#63350, + #63379,#63408,#63425,#63442,#63465,#63489,#63513,#63538,#63562, + #63580,#63594,#63608,#63630,#63647,#63671,#63688,#63705,#63722, + #63739,#63763,#63780,#63802,#63814,#63847,#63871,#63895,#63928, + #63945,#63970,#63987,#64012,#64043,#64068,#64093,#64124,#64141, + #64183,#64200,#64242,#64267,#64301,#64343,#64360,#64377,#64394, + #64406,#64423,#64440)); +#60398 = ADVANCED_FACE('',(#60399),#60517,.F.); +#60399 = FACE_BOUND('',#60400,.F.); +#60400 = EDGE_LOOP('',(#60401,#60411,#60420,#60428,#60437,#60445,#60454, + #60462,#60471,#60479,#60487,#60495,#60503,#60511)); +#60401 = ORIENTED_EDGE('',*,*,#60402,.T.); +#60402 = EDGE_CURVE('',#60403,#60405,#60407,.T.); +#60403 = VERTEX_POINT('',#60404); +#60404 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60405 = VERTEX_POINT('',#60406); +#60406 = CARTESIAN_POINT('',(-0.85,-1.73,0.1)); +#60407 = LINE('',#60408,#60409); +#60408 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60409 = VECTOR('',#60410,1.); +#60410 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60411 = ORIENTED_EDGE('',*,*,#60412,.T.); +#60412 = EDGE_CURVE('',#60405,#60413,#60415,.T.); +#60413 = VERTEX_POINT('',#60414); +#60414 = CARTESIAN_POINT('',(-0.7,-1.73,0.25)); +#60415 = CIRCLE('',#60416,0.15); +#60416 = AXIS2_PLACEMENT_3D('',#60417,#60418,#60419); +#60417 = CARTESIAN_POINT('',(-0.85,-1.73,0.25)); +#60418 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60419 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60420 = ORIENTED_EDGE('',*,*,#60421,.T.); +#60421 = EDGE_CURVE('',#60413,#60422,#60424,.T.); +#60422 = VERTEX_POINT('',#60423); +#60423 = CARTESIAN_POINT('',(-0.7,-1.73,0.45)); +#60424 = LINE('',#60425,#60426); +#60425 = CARTESIAN_POINT('',(-0.7,-1.73,0.275)); +#60426 = VECTOR('',#60427,1.); +#60427 = DIRECTION('',(-2.2E-16,1.22E-15,1.)); +#60428 = ORIENTED_EDGE('',*,*,#60429,.T.); +#60429 = EDGE_CURVE('',#60422,#60430,#60432,.T.); +#60430 = VERTEX_POINT('',#60431); +#60431 = CARTESIAN_POINT('',(-0.55,-1.73,0.6)); +#60432 = CIRCLE('',#60433,0.15); +#60433 = AXIS2_PLACEMENT_3D('',#60434,#60435,#60436); +#60434 = CARTESIAN_POINT('',(-0.55,-1.73,0.45)); +#60435 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60436 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60437 = ORIENTED_EDGE('',*,*,#60438,.F.); +#60438 = EDGE_CURVE('',#60439,#60430,#60441,.T.); +#60439 = VERTEX_POINT('',#60440); +#60440 = CARTESIAN_POINT('',(0.55,-1.73,0.6)); +#60441 = LINE('',#60442,#60443); +#60442 = CARTESIAN_POINT('',(-1.6125,-1.73,0.6)); +#60443 = VECTOR('',#60444,1.); +#60444 = DIRECTION('',(-1.,4.4E-16,0.)); +#60445 = ORIENTED_EDGE('',*,*,#60446,.T.); +#60446 = EDGE_CURVE('',#60439,#60447,#60449,.T.); +#60447 = VERTEX_POINT('',#60448); +#60448 = CARTESIAN_POINT('',(0.7,-1.73,0.45)); +#60449 = CIRCLE('',#60450,0.15); +#60450 = AXIS2_PLACEMENT_3D('',#60451,#60452,#60453); +#60451 = CARTESIAN_POINT('',(0.55,-1.73,0.45)); +#60452 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60453 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60454 = ORIENTED_EDGE('',*,*,#60455,.T.); +#60455 = EDGE_CURVE('',#60447,#60456,#60458,.T.); +#60456 = VERTEX_POINT('',#60457); +#60457 = CARTESIAN_POINT('',(0.7,-1.73,0.25)); +#60458 = LINE('',#60459,#60460); +#60459 = CARTESIAN_POINT('',(0.7,-1.73,0.1)); +#60460 = VECTOR('',#60461,1.); +#60461 = DIRECTION('',(2.2E-16,-1.22E-15,-1.)); +#60462 = ORIENTED_EDGE('',*,*,#60463,.F.); +#60463 = EDGE_CURVE('',#60464,#60456,#60466,.T.); +#60464 = VERTEX_POINT('',#60465); +#60465 = CARTESIAN_POINT('',(0.85,-1.73,0.1)); +#60466 = CIRCLE('',#60467,0.15); +#60467 = AXIS2_PLACEMENT_3D('',#60468,#60469,#60470); +#60468 = CARTESIAN_POINT('',(0.85,-1.73,0.25)); +#60469 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#60470 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60471 = ORIENTED_EDGE('',*,*,#60472,.T.); +#60472 = EDGE_CURVE('',#60464,#60473,#60475,.T.); +#60473 = VERTEX_POINT('',#60474); +#60474 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60475 = LINE('',#60476,#60477); +#60476 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60477 = VECTOR('',#60478,1.); +#60478 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60479 = ORIENTED_EDGE('',*,*,#60480,.T.); +#60480 = EDGE_CURVE('',#60473,#60481,#60483,.T.); +#60481 = VERTEX_POINT('',#60482); +#60482 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#60483 = LINE('',#60484,#60485); +#60484 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60485 = VECTOR('',#60486,1.); +#60486 = DIRECTION('',(0.,0.,1.)); +#60487 = ORIENTED_EDGE('',*,*,#60488,.T.); +#60488 = EDGE_CURVE('',#60481,#60489,#60491,.T.); +#60489 = VERTEX_POINT('',#60490); +#60490 = CARTESIAN_POINT('',(2.675,-1.73,1.15)); +#60491 = LINE('',#60492,#60493); +#60492 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60493 = VECTOR('',#60494,1.); +#60494 = DIRECTION('',(0.,0.,1.)); +#60495 = ORIENTED_EDGE('',*,*,#60496,.F.); +#60496 = EDGE_CURVE('',#60497,#60489,#60499,.T.); +#60497 = VERTEX_POINT('',#60498); +#60498 = CARTESIAN_POINT('',(-2.675,-1.73,1.15)); +#60499 = LINE('',#60500,#60501); +#60500 = CARTESIAN_POINT('',(-2.675,-1.73,1.15)); +#60501 = VECTOR('',#60502,1.); +#60502 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60503 = ORIENTED_EDGE('',*,*,#60504,.F.); +#60504 = EDGE_CURVE('',#60505,#60497,#60507,.T.); +#60505 = VERTEX_POINT('',#60506); +#60506 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#60507 = LINE('',#60508,#60509); +#60508 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60509 = VECTOR('',#60510,1.); +#60510 = DIRECTION('',(0.,0.,1.)); +#60511 = ORIENTED_EDGE('',*,*,#60512,.F.); +#60512 = EDGE_CURVE('',#60403,#60505,#60513,.T.); +#60513 = LINE('',#60514,#60515); +#60514 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60515 = VECTOR('',#60516,1.); +#60516 = DIRECTION('',(0.,0.,1.)); +#60517 = PLANE('',#60518); +#60518 = AXIS2_PLACEMENT_3D('',#60519,#60520,#60521); +#60519 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60520 = DIRECTION('',(-4.4E-16,-1.,2.2E-16)); +#60521 = DIRECTION('',(-4.4E-16,2.2E-16,1.)); +#60522 = ADVANCED_FACE('',(#60523),#60548,.F.); +#60523 = FACE_BOUND('',#60524,.F.); +#60524 = EDGE_LOOP('',(#60525,#60526,#60534,#60542)); +#60525 = ORIENTED_EDGE('',*,*,#60402,.F.); +#60526 = ORIENTED_EDGE('',*,*,#60527,.F.); +#60527 = EDGE_CURVE('',#60528,#60403,#60530,.T.); +#60528 = VERTEX_POINT('',#60529); +#60529 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60530 = LINE('',#60531,#60532); +#60531 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60532 = VECTOR('',#60533,1.); +#60533 = DIRECTION('',(0.,1.,0.)); +#60534 = ORIENTED_EDGE('',*,*,#60535,.T.); +#60535 = EDGE_CURVE('',#60528,#60536,#60538,.T.); +#60536 = VERTEX_POINT('',#60537); +#60537 = CARTESIAN_POINT('',(-0.85,-1.85,0.1)); +#60538 = LINE('',#60539,#60540); +#60539 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60540 = VECTOR('',#60541,1.); +#60541 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60542 = ORIENTED_EDGE('',*,*,#60543,.F.); +#60543 = EDGE_CURVE('',#60405,#60536,#60544,.T.); +#60544 = LINE('',#60545,#60546); +#60545 = CARTESIAN_POINT('',(-0.85,-1.73,0.1)); +#60546 = VECTOR('',#60547,1.); +#60547 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60548 = PLANE('',#60549); +#60549 = AXIS2_PLACEMENT_3D('',#60550,#60551,#60552); +#60550 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60551 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#60552 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#60553 = ADVANCED_FACE('',(#60554),#60573,.T.); +#60554 = FACE_BOUND('',#60555,.T.); +#60555 = EDGE_LOOP('',(#60556,#60557,#60565,#60572)); +#60556 = ORIENTED_EDGE('',*,*,#60412,.T.); +#60557 = ORIENTED_EDGE('',*,*,#60558,.T.); +#60558 = EDGE_CURVE('',#60413,#60559,#60561,.T.); +#60559 = VERTEX_POINT('',#60560); +#60560 = CARTESIAN_POINT('',(-0.7,-1.85,0.25)); +#60561 = LINE('',#60562,#60563); +#60562 = CARTESIAN_POINT('',(-0.7,-1.73,0.25)); +#60563 = VECTOR('',#60564,1.); +#60564 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60565 = ORIENTED_EDGE('',*,*,#60566,.F.); +#60566 = EDGE_CURVE('',#60536,#60559,#60567,.T.); +#60567 = CIRCLE('',#60568,0.15); +#60568 = AXIS2_PLACEMENT_3D('',#60569,#60570,#60571); +#60569 = CARTESIAN_POINT('',(-0.85,-1.85,0.25)); +#60570 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60571 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60572 = ORIENTED_EDGE('',*,*,#60543,.F.); +#60573 = CYLINDRICAL_SURFACE('',#60574,0.15); +#60574 = AXIS2_PLACEMENT_3D('',#60575,#60576,#60577); +#60575 = CARTESIAN_POINT('',(-0.85,-1.73,0.25)); +#60576 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60577 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#60578 = ADVANCED_FACE('',(#60579),#60604,.T.); +#60579 = FACE_BOUND('',#60580,.T.); +#60580 = EDGE_LOOP('',(#60581,#60589,#60597,#60603)); +#60581 = ORIENTED_EDGE('',*,*,#60582,.F.); +#60582 = EDGE_CURVE('',#60583,#60403,#60585,.T.); +#60583 = VERTEX_POINT('',#60584); +#60584 = CARTESIAN_POINT('',(-2.725,-1.73,0.1)); +#60585 = LINE('',#60586,#60587); +#60586 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60587 = VECTOR('',#60588,1.); +#60588 = DIRECTION('',(1.,-4.4E-16,6.1E-16)); +#60589 = ORIENTED_EDGE('',*,*,#60590,.T.); +#60590 = EDGE_CURVE('',#60583,#60591,#60593,.T.); +#60591 = VERTEX_POINT('',#60592); +#60592 = CARTESIAN_POINT('',(-2.725,-1.73,0.66)); +#60593 = LINE('',#60594,#60595); +#60594 = CARTESIAN_POINT('',(-2.725,-1.73,0.1)); +#60595 = VECTOR('',#60596,1.); +#60596 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#60597 = ORIENTED_EDGE('',*,*,#60598,.T.); +#60598 = EDGE_CURVE('',#60591,#60505,#60599,.T.); +#60599 = LINE('',#60600,#60601); +#60600 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#60601 = VECTOR('',#60602,1.); +#60602 = DIRECTION('',(1.,-4.4E-16,6.1E-16)); +#60603 = ORIENTED_EDGE('',*,*,#60512,.F.); +#60604 = PLANE('',#60605); +#60605 = AXIS2_PLACEMENT_3D('',#60606,#60607,#60608); +#60606 = CARTESIAN_POINT('',(-2.675,-1.73,0.1)); +#60607 = DIRECTION('',(4.4E-16,1.,-1.E-15)); +#60608 = DIRECTION('',(-3.3E-16,1.E-15,1.)); +#60609 = ADVANCED_FACE('',(#60610),#60628,.T.); +#60610 = FACE_BOUND('',#60611,.T.); +#60611 = EDGE_LOOP('',(#60612,#60613,#60621,#60627)); +#60612 = ORIENTED_EDGE('',*,*,#60421,.T.); +#60613 = ORIENTED_EDGE('',*,*,#60614,.T.); +#60614 = EDGE_CURVE('',#60422,#60615,#60617,.T.); +#60615 = VERTEX_POINT('',#60616); +#60616 = CARTESIAN_POINT('',(-0.7,-1.85,0.45)); +#60617 = LINE('',#60618,#60619); +#60618 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#60619 = VECTOR('',#60620,1.); +#60620 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60621 = ORIENTED_EDGE('',*,*,#60622,.T.); +#60622 = EDGE_CURVE('',#60615,#60559,#60623,.T.); +#60623 = LINE('',#60624,#60625); +#60624 = CARTESIAN_POINT('',(-0.7,-1.85,0.885)); +#60625 = VECTOR('',#60626,1.); +#60626 = DIRECTION('',(2.2E-16,-1.22E-15,-1.)); +#60627 = ORIENTED_EDGE('',*,*,#60558,.F.); +#60628 = PLANE('',#60629); +#60629 = AXIS2_PLACEMENT_3D('',#60630,#60631,#60632); +#60630 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#60631 = DIRECTION('',(1.,-5.E-16,2.2E-16)); +#60632 = DIRECTION('',(2.2E-16,-9.4E-16,-1.)); +#60633 = ADVANCED_FACE('',(#60634),#60693,.F.); +#60634 = FACE_BOUND('',#60635,.F.); +#60635 = EDGE_LOOP('',(#60636,#60637,#60646,#60654,#60662,#60670,#60679, + #60687)); +#60636 = ORIENTED_EDGE('',*,*,#60504,.T.); +#60637 = ORIENTED_EDGE('',*,*,#60638,.F.); +#60638 = EDGE_CURVE('',#60639,#60497,#60641,.T.); +#60639 = VERTEX_POINT('',#60640); +#60640 = CARTESIAN_POINT('',(-2.675,-1.68,1.2)); +#60641 = CIRCLE('',#60642,5.E-02); +#60642 = AXIS2_PLACEMENT_3D('',#60643,#60644,#60645); +#60643 = CARTESIAN_POINT('',(-2.675,-1.68,1.15)); +#60644 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60645 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60646 = ORIENTED_EDGE('',*,*,#60647,.T.); +#60647 = EDGE_CURVE('',#60639,#60648,#60650,.T.); +#60648 = VERTEX_POINT('',#60649); +#60649 = CARTESIAN_POINT('',(-2.675,-0.675,1.2)); +#60650 = LINE('',#60651,#60652); +#60651 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#60652 = VECTOR('',#60653,1.); +#60653 = DIRECTION('',(0.,1.,0.)); +#60654 = ORIENTED_EDGE('',*,*,#60655,.T.); +#60655 = EDGE_CURVE('',#60648,#60656,#60658,.T.); +#60656 = VERTEX_POINT('',#60657); +#60657 = CARTESIAN_POINT('',(-2.675,-0.675,1.32)); +#60658 = LINE('',#60659,#60660); +#60659 = CARTESIAN_POINT('',(-2.675,-0.675,1.2)); +#60660 = VECTOR('',#60661,1.); +#60661 = DIRECTION('',(6.E-17,-1.1E-16,1.)); +#60662 = ORIENTED_EDGE('',*,*,#60663,.T.); +#60663 = EDGE_CURVE('',#60656,#60664,#60666,.T.); +#60664 = VERTEX_POINT('',#60665); +#60665 = CARTESIAN_POINT('',(-2.675,-1.7,1.32)); +#60666 = LINE('',#60667,#60668); +#60667 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#60668 = VECTOR('',#60669,1.); +#60669 = DIRECTION('',(0.,-1.,0.)); +#60670 = ORIENTED_EDGE('',*,*,#60671,.T.); +#60671 = EDGE_CURVE('',#60664,#60672,#60674,.T.); +#60672 = VERTEX_POINT('',#60673); +#60673 = CARTESIAN_POINT('',(-2.675,-1.85,1.17)); +#60674 = CIRCLE('',#60675,0.15); +#60675 = AXIS2_PLACEMENT_3D('',#60676,#60677,#60678); +#60676 = CARTESIAN_POINT('',(-2.675,-1.7,1.17)); +#60677 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60678 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60679 = ORIENTED_EDGE('',*,*,#60680,.T.); +#60680 = EDGE_CURVE('',#60672,#60681,#60683,.T.); +#60681 = VERTEX_POINT('',#60682); +#60682 = CARTESIAN_POINT('',(-2.675,-1.85,0.66)); +#60683 = LINE('',#60684,#60685); +#60684 = CARTESIAN_POINT('',(-2.675,-1.85,1.32)); +#60685 = VECTOR('',#60686,1.); +#60686 = DIRECTION('',(0.,0.,-1.)); +#60687 = ORIENTED_EDGE('',*,*,#60688,.F.); +#60688 = EDGE_CURVE('',#60505,#60681,#60689,.T.); +#60689 = LINE('',#60690,#60691); +#60690 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#60691 = VECTOR('',#60692,1.); +#60692 = DIRECTION('',(-4.4E-16,-1.,7.8E-16)); +#60693 = PLANE('',#60694); +#60694 = AXIS2_PLACEMENT_3D('',#60695,#60696,#60697); +#60695 = CARTESIAN_POINT('',(-2.675,1.17E-15,1.015149501661)); +#60696 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#60697 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#60698 = ADVANCED_FACE('',(#60699),#60718,.F.); +#60699 = FACE_BOUND('',#60700,.F.); +#60700 = EDGE_LOOP('',(#60701,#60702,#60703,#60712)); +#60701 = ORIENTED_EDGE('',*,*,#60429,.F.); +#60702 = ORIENTED_EDGE('',*,*,#60614,.T.); +#60703 = ORIENTED_EDGE('',*,*,#60704,.T.); +#60704 = EDGE_CURVE('',#60615,#60705,#60707,.T.); +#60705 = VERTEX_POINT('',#60706); +#60706 = CARTESIAN_POINT('',(-0.55,-1.85,0.6)); +#60707 = CIRCLE('',#60708,0.15); +#60708 = AXIS2_PLACEMENT_3D('',#60709,#60710,#60711); +#60709 = CARTESIAN_POINT('',(-0.55,-1.85,0.45)); +#60710 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60711 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60712 = ORIENTED_EDGE('',*,*,#60713,.F.); +#60713 = EDGE_CURVE('',#60430,#60705,#60714,.T.); +#60714 = LINE('',#60715,#60716); +#60715 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#60716 = VECTOR('',#60717,1.); +#60717 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60718 = CYLINDRICAL_SURFACE('',#60719,0.15); +#60719 = AXIS2_PLACEMENT_3D('',#60720,#60721,#60722); +#60720 = CARTESIAN_POINT('',(-0.55,1.85,0.45)); +#60721 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60722 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60723 = ADVANCED_FACE('',(#60724),#60743,.F.); +#60724 = FACE_BOUND('',#60725,.F.); +#60725 = EDGE_LOOP('',(#60726,#60727,#60728,#60737)); +#60726 = ORIENTED_EDGE('',*,*,#60638,.T.); +#60727 = ORIENTED_EDGE('',*,*,#60496,.T.); +#60728 = ORIENTED_EDGE('',*,*,#60729,.F.); +#60729 = EDGE_CURVE('',#60730,#60489,#60732,.T.); +#60730 = VERTEX_POINT('',#60731); +#60731 = CARTESIAN_POINT('',(2.675,-1.68,1.2)); +#60732 = CIRCLE('',#60733,5.E-02); +#60733 = AXIS2_PLACEMENT_3D('',#60734,#60735,#60736); +#60734 = CARTESIAN_POINT('',(2.675,-1.68,1.15)); +#60735 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60736 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60737 = ORIENTED_EDGE('',*,*,#60738,.F.); +#60738 = EDGE_CURVE('',#60639,#60730,#60739,.T.); +#60739 = LINE('',#60740,#60741); +#60740 = CARTESIAN_POINT('',(-2.675,-1.68,1.2)); +#60741 = VECTOR('',#60742,1.); +#60742 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60743 = CYLINDRICAL_SURFACE('',#60744,5.E-02); +#60744 = AXIS2_PLACEMENT_3D('',#60745,#60746,#60747); +#60745 = CARTESIAN_POINT('',(-2.675,-1.68,1.15)); +#60746 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60747 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#60748 = ADVANCED_FACE('',(#60749),#60767,.F.); +#60749 = FACE_BOUND('',#60750,.F.); +#60750 = EDGE_LOOP('',(#60751,#60752,#60753,#60761)); +#60751 = ORIENTED_EDGE('',*,*,#60438,.T.); +#60752 = ORIENTED_EDGE('',*,*,#60713,.T.); +#60753 = ORIENTED_EDGE('',*,*,#60754,.T.); +#60754 = EDGE_CURVE('',#60705,#60755,#60757,.T.); +#60755 = VERTEX_POINT('',#60756); +#60756 = CARTESIAN_POINT('',(0.55,-1.85,0.6)); +#60757 = LINE('',#60758,#60759); +#60758 = CARTESIAN_POINT('',(-1.6125,-1.85,0.6)); +#60759 = VECTOR('',#60760,1.); +#60760 = DIRECTION('',(1.,-4.4E-16,0.)); +#60761 = ORIENTED_EDGE('',*,*,#60762,.F.); +#60762 = EDGE_CURVE('',#60439,#60755,#60763,.T.); +#60763 = LINE('',#60764,#60765); +#60764 = CARTESIAN_POINT('',(0.55,1.85,0.6)); +#60765 = VECTOR('',#60766,1.); +#60766 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60767 = PLANE('',#60768); +#60768 = AXIS2_PLACEMENT_3D('',#60769,#60770,#60771); +#60769 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#60770 = DIRECTION('',(0.,1.17E-15,1.)); +#60771 = DIRECTION('',(1.,-6.7E-16,7.839E-31)); +#60772 = ADVANCED_FACE('',(#60773),#60824,.T.); +#60773 = FACE_BOUND('',#60774,.T.); +#60774 = EDGE_LOOP('',(#60775,#60783,#60791,#60799,#60808,#60816,#60822, + #60823)); +#60775 = ORIENTED_EDGE('',*,*,#60776,.T.); +#60776 = EDGE_CURVE('',#60730,#60777,#60779,.T.); +#60777 = VERTEX_POINT('',#60778); +#60778 = CARTESIAN_POINT('',(2.675,-0.675,1.2)); +#60779 = LINE('',#60780,#60781); +#60780 = CARTESIAN_POINT('',(2.675,-1.73,1.2)); +#60781 = VECTOR('',#60782,1.); +#60782 = DIRECTION('',(0.,1.,0.)); +#60783 = ORIENTED_EDGE('',*,*,#60784,.T.); +#60784 = EDGE_CURVE('',#60777,#60785,#60787,.T.); +#60785 = VERTEX_POINT('',#60786); +#60786 = CARTESIAN_POINT('',(2.675,-0.675,1.32)); +#60787 = LINE('',#60788,#60789); +#60788 = CARTESIAN_POINT('',(2.675,-0.675,1.2)); +#60789 = VECTOR('',#60790,1.); +#60790 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#60791 = ORIENTED_EDGE('',*,*,#60792,.T.); +#60792 = EDGE_CURVE('',#60785,#60793,#60795,.T.); +#60793 = VERTEX_POINT('',#60794); +#60794 = CARTESIAN_POINT('',(2.675,-1.7,1.32)); +#60795 = LINE('',#60796,#60797); +#60796 = CARTESIAN_POINT('',(2.675,1.85,1.32)); +#60797 = VECTOR('',#60798,1.); +#60798 = DIRECTION('',(0.,-1.,0.)); +#60799 = ORIENTED_EDGE('',*,*,#60800,.T.); +#60800 = EDGE_CURVE('',#60793,#60801,#60803,.T.); +#60801 = VERTEX_POINT('',#60802); +#60802 = CARTESIAN_POINT('',(2.675,-1.85,1.17)); +#60803 = CIRCLE('',#60804,0.15); +#60804 = AXIS2_PLACEMENT_3D('',#60805,#60806,#60807); +#60805 = CARTESIAN_POINT('',(2.675,-1.7,1.17)); +#60806 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60807 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#60808 = ORIENTED_EDGE('',*,*,#60809,.T.); +#60809 = EDGE_CURVE('',#60801,#60810,#60812,.T.); +#60810 = VERTEX_POINT('',#60811); +#60811 = CARTESIAN_POINT('',(2.675,-1.85,0.66)); +#60812 = LINE('',#60813,#60814); +#60813 = CARTESIAN_POINT('',(2.675,-1.85,1.32)); +#60814 = VECTOR('',#60815,1.); +#60815 = DIRECTION('',(0.,0.,-1.)); +#60816 = ORIENTED_EDGE('',*,*,#60817,.F.); +#60817 = EDGE_CURVE('',#60481,#60810,#60818,.T.); +#60818 = LINE('',#60819,#60820); +#60819 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#60820 = VECTOR('',#60821,1.); +#60821 = DIRECTION('',(-8.9E-16,-1.,4.4E-16)); +#60822 = ORIENTED_EDGE('',*,*,#60488,.T.); +#60823 = ORIENTED_EDGE('',*,*,#60729,.F.); +#60824 = PLANE('',#60825); +#60825 = AXIS2_PLACEMENT_3D('',#60826,#60827,#60828); +#60826 = CARTESIAN_POINT('',(2.675,-8.3E-16,1.015149501661)); +#60827 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#60828 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#60829 = ADVANCED_FACE('',(#60830),#60849,.F.); +#60830 = FACE_BOUND('',#60831,.F.); +#60831 = EDGE_LOOP('',(#60832,#60833,#60834,#60843)); +#60832 = ORIENTED_EDGE('',*,*,#60446,.F.); +#60833 = ORIENTED_EDGE('',*,*,#60762,.T.); +#60834 = ORIENTED_EDGE('',*,*,#60835,.T.); +#60835 = EDGE_CURVE('',#60755,#60836,#60838,.T.); +#60836 = VERTEX_POINT('',#60837); +#60837 = CARTESIAN_POINT('',(0.7,-1.85,0.45)); +#60838 = CIRCLE('',#60839,0.15); +#60839 = AXIS2_PLACEMENT_3D('',#60840,#60841,#60842); +#60840 = CARTESIAN_POINT('',(0.55,-1.85,0.45)); +#60841 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60842 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60843 = ORIENTED_EDGE('',*,*,#60844,.F.); +#60844 = EDGE_CURVE('',#60447,#60836,#60845,.T.); +#60845 = LINE('',#60846,#60847); +#60846 = CARTESIAN_POINT('',(0.7,1.85,0.45)); +#60847 = VECTOR('',#60848,1.); +#60848 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60849 = CYLINDRICAL_SURFACE('',#60850,0.15); +#60850 = AXIS2_PLACEMENT_3D('',#60851,#60852,#60853); +#60851 = CARTESIAN_POINT('',(0.55,1.85,0.45)); +#60852 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#60853 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60854 = ADVANCED_FACE('',(#60855),#60880,.T.); +#60855 = FACE_BOUND('',#60856,.F.); +#60856 = EDGE_LOOP('',(#60857,#60865,#60873,#60879)); +#60857 = ORIENTED_EDGE('',*,*,#60858,.F.); +#60858 = EDGE_CURVE('',#60859,#60473,#60861,.T.); +#60859 = VERTEX_POINT('',#60860); +#60860 = CARTESIAN_POINT('',(2.725,-1.73,0.1)); +#60861 = LINE('',#60862,#60863); +#60862 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60863 = VECTOR('',#60864,1.); +#60864 = DIRECTION('',(-1.,8.9E-16,-1.7E-16)); +#60865 = ORIENTED_EDGE('',*,*,#60866,.T.); +#60866 = EDGE_CURVE('',#60859,#60867,#60869,.T.); +#60867 = VERTEX_POINT('',#60868); +#60868 = CARTESIAN_POINT('',(2.725,-1.73,0.66)); +#60869 = LINE('',#60870,#60871); +#60870 = CARTESIAN_POINT('',(2.725,-1.73,0.1)); +#60871 = VECTOR('',#60872,1.); +#60872 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#60873 = ORIENTED_EDGE('',*,*,#60874,.T.); +#60874 = EDGE_CURVE('',#60867,#60481,#60875,.T.); +#60875 = LINE('',#60876,#60877); +#60876 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#60877 = VECTOR('',#60878,1.); +#60878 = DIRECTION('',(-1.,8.9E-16,-1.7E-16)); +#60879 = ORIENTED_EDGE('',*,*,#60480,.F.); +#60880 = PLANE('',#60881); +#60881 = AXIS2_PLACEMENT_3D('',#60882,#60883,#60884); +#60882 = CARTESIAN_POINT('',(2.675,-1.73,0.1)); +#60883 = DIRECTION('',(8.9E-16,1.,-6.7E-16)); +#60884 = DIRECTION('',(8.9E-16,-6.7E-16,-1.)); +#60885 = ADVANCED_FACE('',(#60886),#60904,.T.); +#60886 = FACE_BOUND('',#60887,.T.); +#60887 = EDGE_LOOP('',(#60888,#60889,#60897,#60903)); +#60888 = ORIENTED_EDGE('',*,*,#60455,.T.); +#60889 = ORIENTED_EDGE('',*,*,#60890,.T.); +#60890 = EDGE_CURVE('',#60456,#60891,#60893,.T.); +#60891 = VERTEX_POINT('',#60892); +#60892 = CARTESIAN_POINT('',(0.7,-1.85,0.25)); +#60893 = LINE('',#60894,#60895); +#60894 = CARTESIAN_POINT('',(0.7,-1.73,0.25)); +#60895 = VECTOR('',#60896,1.); +#60896 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60897 = ORIENTED_EDGE('',*,*,#60898,.T.); +#60898 = EDGE_CURVE('',#60891,#60836,#60899,.T.); +#60899 = LINE('',#60900,#60901); +#60900 = CARTESIAN_POINT('',(0.7,-1.85,0.71)); +#60901 = VECTOR('',#60902,1.); +#60902 = DIRECTION('',(-2.2E-16,1.22E-15,1.)); +#60903 = ORIENTED_EDGE('',*,*,#60844,.F.); +#60904 = PLANE('',#60905); +#60905 = AXIS2_PLACEMENT_3D('',#60906,#60907,#60908); +#60906 = CARTESIAN_POINT('',(0.7,1.85,0.1)); +#60907 = DIRECTION('',(-1.,5.E-16,-2.2E-16)); +#60908 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#60909 = ADVANCED_FACE('',(#60910),#60935,.F.); +#60910 = FACE_BOUND('',#60911,.F.); +#60911 = EDGE_LOOP('',(#60912,#60913,#60921,#60929)); +#60912 = ORIENTED_EDGE('',*,*,#60472,.F.); +#60913 = ORIENTED_EDGE('',*,*,#60914,.T.); +#60914 = EDGE_CURVE('',#60464,#60915,#60917,.T.); +#60915 = VERTEX_POINT('',#60916); +#60916 = CARTESIAN_POINT('',(0.85,-1.85,0.1)); +#60917 = LINE('',#60918,#60919); +#60918 = CARTESIAN_POINT('',(0.85,-1.73,0.1)); +#60919 = VECTOR('',#60920,1.); +#60920 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60921 = ORIENTED_EDGE('',*,*,#60922,.T.); +#60922 = EDGE_CURVE('',#60915,#60923,#60925,.T.); +#60923 = VERTEX_POINT('',#60924); +#60924 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#60925 = LINE('',#60926,#60927); +#60926 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60927 = VECTOR('',#60928,1.); +#60928 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#60929 = ORIENTED_EDGE('',*,*,#60930,.T.); +#60930 = EDGE_CURVE('',#60923,#60473,#60931,.T.); +#60931 = LINE('',#60932,#60933); +#60932 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#60933 = VECTOR('',#60934,1.); +#60934 = DIRECTION('',(0.,1.,0.)); +#60935 = PLANE('',#60936); +#60936 = AXIS2_PLACEMENT_3D('',#60937,#60938,#60939); +#60937 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60938 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#60939 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#60940 = ADVANCED_FACE('',(#60941),#60953,.T.); +#60941 = FACE_BOUND('',#60942,.T.); +#60942 = EDGE_LOOP('',(#60943,#60944,#60951,#60952)); +#60943 = ORIENTED_EDGE('',*,*,#60914,.T.); +#60944 = ORIENTED_EDGE('',*,*,#60945,.T.); +#60945 = EDGE_CURVE('',#60915,#60891,#60946,.T.); +#60946 = CIRCLE('',#60947,0.15); +#60947 = AXIS2_PLACEMENT_3D('',#60948,#60949,#60950); +#60948 = CARTESIAN_POINT('',(0.85,-1.85,0.25)); +#60949 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#60950 = DIRECTION('',(0.,-1.17E-15,-1.)); +#60951 = ORIENTED_EDGE('',*,*,#60890,.F.); +#60952 = ORIENTED_EDGE('',*,*,#60463,.F.); +#60953 = CYLINDRICAL_SURFACE('',#60954,0.15); +#60954 = AXIS2_PLACEMENT_3D('',#60955,#60956,#60957); +#60955 = CARTESIAN_POINT('',(0.85,-1.73,0.25)); +#60956 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#60957 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#60958 = ADVANCED_FACE('',(#60959),#60977,.T.); +#60959 = FACE_BOUND('',#60960,.T.); +#60960 = EDGE_LOOP('',(#60961,#60969,#60975,#60976)); +#60961 = ORIENTED_EDGE('',*,*,#60962,.F.); +#60962 = EDGE_CURVE('',#60963,#60528,#60965,.T.); +#60963 = VERTEX_POINT('',#60964); +#60964 = CARTESIAN_POINT('',(-2.725,-1.85,0.1)); +#60965 = LINE('',#60966,#60967); +#60966 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60967 = VECTOR('',#60968,1.); +#60968 = DIRECTION('',(1.,-4.4E-16,3.3E-16)); +#60969 = ORIENTED_EDGE('',*,*,#60970,.T.); +#60970 = EDGE_CURVE('',#60963,#60583,#60971,.T.); +#60971 = LINE('',#60972,#60973); +#60972 = CARTESIAN_POINT('',(-2.725,-1.85,0.1)); +#60973 = VECTOR('',#60974,1.); +#60974 = DIRECTION('',(4.4E-16,1.,-8.E-17)); +#60975 = ORIENTED_EDGE('',*,*,#60582,.T.); +#60976 = ORIENTED_EDGE('',*,*,#60527,.F.); +#60977 = PLANE('',#60978); +#60978 = AXIS2_PLACEMENT_3D('',#60979,#60980,#60981); +#60979 = CARTESIAN_POINT('',(-2.675,-1.85,0.1)); +#60980 = DIRECTION('',(6.1E-16,-8.E-17,-1.)); +#60981 = DIRECTION('',(4.4E-16,1.,-8.E-17)); +#60982 = ADVANCED_FACE('',(#60983),#61014,.F.); +#60983 = FACE_BOUND('',#60984,.F.); +#60984 = EDGE_LOOP('',(#60985,#60986,#60992,#60993,#60999,#61000,#61006, + #61007,#61008,#61009,#61010,#61011,#61012,#61013)); +#60985 = ORIENTED_EDGE('',*,*,#60535,.F.); +#60986 = ORIENTED_EDGE('',*,*,#60987,.F.); +#60987 = EDGE_CURVE('',#60681,#60528,#60988,.T.); +#60988 = LINE('',#60989,#60990); +#60989 = CARTESIAN_POINT('',(-2.675,-1.85,1.32)); +#60990 = VECTOR('',#60991,1.); +#60991 = DIRECTION('',(0.,0.,-1.)); +#60992 = ORIENTED_EDGE('',*,*,#60680,.F.); +#60993 = ORIENTED_EDGE('',*,*,#60994,.T.); +#60994 = EDGE_CURVE('',#60672,#60801,#60995,.T.); +#60995 = LINE('',#60996,#60997); +#60996 = CARTESIAN_POINT('',(-2.675,-1.85,1.17)); +#60997 = VECTOR('',#60998,1.); +#60998 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#60999 = ORIENTED_EDGE('',*,*,#60809,.T.); +#61000 = ORIENTED_EDGE('',*,*,#61001,.T.); +#61001 = EDGE_CURVE('',#60810,#60923,#61002,.T.); +#61002 = LINE('',#61003,#61004); +#61003 = CARTESIAN_POINT('',(2.675,-1.85,1.32)); +#61004 = VECTOR('',#61005,1.); +#61005 = DIRECTION('',(0.,0.,-1.)); +#61006 = ORIENTED_EDGE('',*,*,#60922,.F.); +#61007 = ORIENTED_EDGE('',*,*,#60945,.T.); +#61008 = ORIENTED_EDGE('',*,*,#60898,.T.); +#61009 = ORIENTED_EDGE('',*,*,#60835,.F.); +#61010 = ORIENTED_EDGE('',*,*,#60754,.F.); +#61011 = ORIENTED_EDGE('',*,*,#60704,.F.); +#61012 = ORIENTED_EDGE('',*,*,#60622,.T.); +#61013 = ORIENTED_EDGE('',*,*,#60566,.F.); +#61014 = PLANE('',#61015); +#61015 = AXIS2_PLACEMENT_3D('',#61016,#61017,#61018); +#61016 = CARTESIAN_POINT('',(-2.675,-1.85,1.32)); +#61017 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#61018 = DIRECTION('',(4.4E-16,-2.2E-16,-1.)); +#61019 = ADVANCED_FACE('',(#61020),#61047,.F.); +#61020 = FACE_BOUND('',#61021,.F.); +#61021 = EDGE_LOOP('',(#61022,#61031,#61032,#61041)); +#61022 = ORIENTED_EDGE('',*,*,#61023,.T.); +#61023 = EDGE_CURVE('',#61024,#60583,#61026,.T.); +#61024 = VERTEX_POINT('',#61025); +#61025 = CARTESIAN_POINT('',(-2.775,-1.68,0.1)); +#61026 = CIRCLE('',#61027,5.E-02); +#61027 = AXIS2_PLACEMENT_3D('',#61028,#61029,#61030); +#61028 = CARTESIAN_POINT('',(-2.725,-1.68,0.1)); +#61029 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61030 = DIRECTION('',(-8.88E-15,-1.,1.7E-16)); +#61031 = ORIENTED_EDGE('',*,*,#60590,.T.); +#61032 = ORIENTED_EDGE('',*,*,#61033,.F.); +#61033 = EDGE_CURVE('',#61034,#60591,#61036,.T.); +#61034 = VERTEX_POINT('',#61035); +#61035 = CARTESIAN_POINT('',(-2.775,-1.68,0.66)); +#61036 = CIRCLE('',#61037,5.E-02); +#61037 = AXIS2_PLACEMENT_3D('',#61038,#61039,#61040); +#61038 = CARTESIAN_POINT('',(-2.725,-1.68,0.66)); +#61039 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61040 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#61041 = ORIENTED_EDGE('',*,*,#61042,.F.); +#61042 = EDGE_CURVE('',#61024,#61034,#61043,.T.); +#61043 = LINE('',#61044,#61045); +#61044 = CARTESIAN_POINT('',(-2.775,-1.68,0.1)); +#61045 = VECTOR('',#61046,1.); +#61046 = DIRECTION('',(1.7E-16,-5.E-17,1.)); +#61047 = CYLINDRICAL_SURFACE('',#61048,5.E-02); +#61048 = AXIS2_PLACEMENT_3D('',#61049,#61050,#61051); +#61049 = CARTESIAN_POINT('',(-2.725,-1.68,0.1)); +#61050 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61051 = DIRECTION('',(-8.88E-15,-1.,1.7E-16)); +#61052 = ADVANCED_FACE('',(#61053),#61071,.T.); +#61053 = FACE_BOUND('',#61054,.T.); +#61054 = EDGE_LOOP('',(#61055,#61056,#61064,#61070)); +#61055 = ORIENTED_EDGE('',*,*,#60598,.F.); +#61056 = ORIENTED_EDGE('',*,*,#61057,.T.); +#61057 = EDGE_CURVE('',#60591,#61058,#61060,.T.); +#61058 = VERTEX_POINT('',#61059); +#61059 = CARTESIAN_POINT('',(-2.725,-1.85,0.66)); +#61060 = LINE('',#61061,#61062); +#61061 = CARTESIAN_POINT('',(-2.725,-1.73,0.66)); +#61062 = VECTOR('',#61063,1.); +#61063 = DIRECTION('',(-4.4E-16,-1.,7.8E-16)); +#61064 = ORIENTED_EDGE('',*,*,#61065,.T.); +#61065 = EDGE_CURVE('',#61058,#60681,#61066,.T.); +#61066 = LINE('',#61067,#61068); +#61067 = CARTESIAN_POINT('',(-2.675,-1.85,0.66)); +#61068 = VECTOR('',#61069,1.); +#61069 = DIRECTION('',(1.,-4.4E-16,6.1E-16)); +#61070 = ORIENTED_EDGE('',*,*,#60688,.F.); +#61071 = PLANE('',#61072); +#61072 = AXIS2_PLACEMENT_3D('',#61073,#61074,#61075); +#61073 = CARTESIAN_POINT('',(-2.675,-1.73,0.66)); +#61074 = DIRECTION('',(-6.1E-16,7.8E-16,1.)); +#61075 = DIRECTION('',(-4.4E-16,-1.,7.8E-16)); +#61076 = ADVANCED_FACE('',(#61077,#61152),#61222,.F.); +#61077 = FACE_BOUND('',#61078,.F.); +#61078 = EDGE_LOOP('',(#61079,#61080,#61088,#61096,#61104,#61112,#61120, + #61128,#61136,#61144,#61150,#61151)); +#61079 = ORIENTED_EDGE('',*,*,#60776,.T.); +#61080 = ORIENTED_EDGE('',*,*,#61081,.F.); +#61081 = EDGE_CURVE('',#61082,#60777,#61084,.T.); +#61082 = VERTEX_POINT('',#61083); +#61083 = CARTESIAN_POINT('',(2.675,-0.525,1.2)); +#61084 = LINE('',#61085,#61086); +#61085 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61086 = VECTOR('',#61087,1.); +#61087 = DIRECTION('',(-6.7E-16,-1.,3.3E-16)); +#61088 = ORIENTED_EDGE('',*,*,#61089,.F.); +#61089 = EDGE_CURVE('',#61090,#61082,#61092,.T.); +#61090 = VERTEX_POINT('',#61091); +#61091 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61092 = LINE('',#61093,#61094); +#61093 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61094 = VECTOR('',#61095,1.); +#61095 = DIRECTION('',(-1.E-15,-1.,-1.E-30)); +#61096 = ORIENTED_EDGE('',*,*,#61097,.F.); +#61097 = EDGE_CURVE('',#61098,#61090,#61100,.T.); +#61098 = VERTEX_POINT('',#61099); +#61099 = CARTESIAN_POINT('',(2.675,0.675,1.2)); +#61100 = LINE('',#61101,#61102); +#61101 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61102 = VECTOR('',#61103,1.); +#61103 = DIRECTION('',(-6.7E-16,-1.,3.3E-16)); +#61104 = ORIENTED_EDGE('',*,*,#61105,.T.); +#61105 = EDGE_CURVE('',#61098,#61106,#61108,.T.); +#61106 = VERTEX_POINT('',#61107); +#61107 = CARTESIAN_POINT('',(2.675,1.68,1.2)); +#61108 = LINE('',#61109,#61110); +#61109 = CARTESIAN_POINT('',(2.675,-1.73,1.2)); +#61110 = VECTOR('',#61111,1.); +#61111 = DIRECTION('',(0.,1.,0.)); +#61112 = ORIENTED_EDGE('',*,*,#61113,.F.); +#61113 = EDGE_CURVE('',#61114,#61106,#61116,.T.); +#61114 = VERTEX_POINT('',#61115); +#61115 = CARTESIAN_POINT('',(-2.675,1.68,1.2)); +#61116 = LINE('',#61117,#61118); +#61117 = CARTESIAN_POINT('',(-2.675,1.68,1.2)); +#61118 = VECTOR('',#61119,1.); +#61119 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61120 = ORIENTED_EDGE('',*,*,#61121,.F.); +#61121 = EDGE_CURVE('',#61122,#61114,#61124,.T.); +#61122 = VERTEX_POINT('',#61123); +#61123 = CARTESIAN_POINT('',(-2.675,0.675,1.2)); +#61124 = LINE('',#61125,#61126); +#61125 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61126 = VECTOR('',#61127,1.); +#61127 = DIRECTION('',(0.,1.,0.)); +#61128 = ORIENTED_EDGE('',*,*,#61129,.F.); +#61129 = EDGE_CURVE('',#61130,#61122,#61132,.T.); +#61130 = VERTEX_POINT('',#61131); +#61131 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61132 = LINE('',#61133,#61134); +#61133 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61134 = VECTOR('',#61135,1.); +#61135 = DIRECTION('',(0.,1.,0.)); +#61136 = ORIENTED_EDGE('',*,*,#61137,.T.); +#61137 = EDGE_CURVE('',#61130,#61138,#61140,.T.); +#61138 = VERTEX_POINT('',#61139); +#61139 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#61140 = LINE('',#61141,#61142); +#61141 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61142 = VECTOR('',#61143,1.); +#61143 = DIRECTION('',(-5.6E-16,-1.,4.4E-16)); +#61144 = ORIENTED_EDGE('',*,*,#61145,.F.); +#61145 = EDGE_CURVE('',#60648,#61138,#61146,.T.); +#61146 = LINE('',#61147,#61148); +#61147 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61148 = VECTOR('',#61149,1.); +#61149 = DIRECTION('',(0.,1.,0.)); +#61150 = ORIENTED_EDGE('',*,*,#60647,.F.); +#61151 = ORIENTED_EDGE('',*,*,#60738,.T.); +#61152 = FACE_BOUND('',#61153,.F.); +#61153 = EDGE_LOOP('',(#61154,#61164,#61173,#61181,#61190,#61198,#61207, + #61215)); +#61154 = ORIENTED_EDGE('',*,*,#61155,.T.); +#61155 = EDGE_CURVE('',#61156,#61158,#61160,.T.); +#61156 = VERTEX_POINT('',#61157); +#61157 = CARTESIAN_POINT('',(-1.255,0.705,1.2)); +#61158 = VERTEX_POINT('',#61159); +#61159 = CARTESIAN_POINT('',(1.255,0.705,1.2)); +#61160 = LINE('',#61161,#61162); +#61161 = CARTESIAN_POINT('',(-2.04,0.705,1.2)); +#61162 = VECTOR('',#61163,1.); +#61163 = DIRECTION('',(1.,2.2E-16,2.8E-16)); +#61164 = ORIENTED_EDGE('',*,*,#61165,.T.); +#61165 = EDGE_CURVE('',#61158,#61166,#61168,.T.); +#61166 = VERTEX_POINT('',#61167); +#61167 = CARTESIAN_POINT('',(1.405,0.555,1.2)); +#61168 = CIRCLE('',#61169,0.15); +#61169 = AXIS2_PLACEMENT_3D('',#61170,#61171,#61172); +#61170 = CARTESIAN_POINT('',(1.255,0.555,1.2)); +#61171 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61172 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61173 = ORIENTED_EDGE('',*,*,#61174,.T.); +#61174 = EDGE_CURVE('',#61166,#61175,#61177,.T.); +#61175 = VERTEX_POINT('',#61176); +#61176 = CARTESIAN_POINT('',(1.405,-0.555,1.2)); +#61177 = LINE('',#61178,#61179); +#61178 = CARTESIAN_POINT('',(1.405,-0.5125,1.2)); +#61179 = VECTOR('',#61180,1.); +#61180 = DIRECTION('',(1.1E-16,-1.,6.6E-16)); +#61181 = ORIENTED_EDGE('',*,*,#61182,.F.); +#61182 = EDGE_CURVE('',#61183,#61175,#61185,.T.); +#61183 = VERTEX_POINT('',#61184); +#61184 = CARTESIAN_POINT('',(1.255,-0.705,1.2)); +#61185 = CIRCLE('',#61186,0.15); +#61186 = AXIS2_PLACEMENT_3D('',#61187,#61188,#61189); +#61187 = CARTESIAN_POINT('',(1.255,-0.555,1.2)); +#61188 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61189 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61190 = ORIENTED_EDGE('',*,*,#61191,.T.); +#61191 = EDGE_CURVE('',#61183,#61192,#61194,.T.); +#61192 = VERTEX_POINT('',#61193); +#61193 = CARTESIAN_POINT('',(-1.255,-0.705,1.2)); +#61194 = LINE('',#61195,#61196); +#61195 = CARTESIAN_POINT('',(-0.635,-0.705,1.2)); +#61196 = VECTOR('',#61197,1.); +#61197 = DIRECTION('',(-1.,-2.2E-16,-2.8E-16)); +#61198 = ORIENTED_EDGE('',*,*,#61199,.F.); +#61199 = EDGE_CURVE('',#61200,#61192,#61202,.T.); +#61200 = VERTEX_POINT('',#61201); +#61201 = CARTESIAN_POINT('',(-1.405,-0.555,1.2)); +#61202 = CIRCLE('',#61203,0.15); +#61203 = AXIS2_PLACEMENT_3D('',#61204,#61205,#61206); +#61204 = CARTESIAN_POINT('',(-1.255,-0.555,1.2)); +#61205 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61206 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61207 = ORIENTED_EDGE('',*,*,#61208,.T.); +#61208 = EDGE_CURVE('',#61200,#61209,#61211,.T.); +#61209 = VERTEX_POINT('',#61210); +#61210 = CARTESIAN_POINT('',(-1.405,0.555,1.2)); +#61211 = LINE('',#61212,#61213); +#61212 = CARTESIAN_POINT('',(-1.405,-1.2175,1.2)); +#61213 = VECTOR('',#61214,1.); +#61214 = DIRECTION('',(-1.1E-16,1.,-6.6E-16)); +#61215 = ORIENTED_EDGE('',*,*,#61216,.F.); +#61216 = EDGE_CURVE('',#61156,#61209,#61217,.T.); +#61217 = CIRCLE('',#61218,0.15); +#61218 = AXIS2_PLACEMENT_3D('',#61219,#61220,#61221); +#61219 = CARTESIAN_POINT('',(-1.255,0.555,1.2)); +#61220 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61221 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61222 = PLANE('',#61223); +#61223 = AXIS2_PLACEMENT_3D('',#61224,#61225,#61226); +#61224 = CARTESIAN_POINT('',(-2.675,-1.73,1.2)); +#61225 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#61226 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#61227 = ADVANCED_FACE('',(#61228),#61255,.F.); +#61228 = FACE_BOUND('',#61229,.F.); +#61229 = EDGE_LOOP('',(#61230,#61239,#61247,#61254)); +#61230 = ORIENTED_EDGE('',*,*,#61231,.T.); +#61231 = EDGE_CURVE('',#60648,#61232,#61234,.T.); +#61232 = VERTEX_POINT('',#61233); +#61233 = CARTESIAN_POINT('',(-2.825,-0.525,1.2)); +#61234 = CIRCLE('',#61235,0.15); +#61235 = AXIS2_PLACEMENT_3D('',#61236,#61237,#61238); +#61236 = CARTESIAN_POINT('',(-2.825,-0.675,1.2)); +#61237 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#61238 = DIRECTION('',(-1.,1.11E-15,6.E-17)); +#61239 = ORIENTED_EDGE('',*,*,#61240,.T.); +#61240 = EDGE_CURVE('',#61232,#61241,#61243,.T.); +#61241 = VERTEX_POINT('',#61242); +#61242 = CARTESIAN_POINT('',(-2.825,-0.525,1.32)); +#61243 = LINE('',#61244,#61245); +#61244 = CARTESIAN_POINT('',(-2.825,-0.525,1.2)); +#61245 = VECTOR('',#61246,1.); +#61246 = DIRECTION('',(6.E-17,-1.1E-16,1.)); +#61247 = ORIENTED_EDGE('',*,*,#61248,.F.); +#61248 = EDGE_CURVE('',#60656,#61241,#61249,.T.); +#61249 = CIRCLE('',#61250,0.15); +#61250 = AXIS2_PLACEMENT_3D('',#61251,#61252,#61253); +#61251 = CARTESIAN_POINT('',(-2.825,-0.675,1.32)); +#61252 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#61253 = DIRECTION('',(-1.,1.11E-15,6.E-17)); +#61254 = ORIENTED_EDGE('',*,*,#60655,.F.); +#61255 = CYLINDRICAL_SURFACE('',#61256,0.15); +#61256 = AXIS2_PLACEMENT_3D('',#61257,#61258,#61259); +#61257 = CARTESIAN_POINT('',(-2.825,-0.675,1.2)); +#61258 = DIRECTION('',(6.E-17,-1.1E-16,1.)); +#61259 = DIRECTION('',(1.,-8.9E-16,-6.E-17)); +#61260 = ADVANCED_FACE('',(#61261),#61272,.T.); +#61261 = FACE_BOUND('',#61262,.T.); +#61262 = EDGE_LOOP('',(#61263,#61264,#61265,#61266)); +#61263 = ORIENTED_EDGE('',*,*,#60671,.T.); +#61264 = ORIENTED_EDGE('',*,*,#60994,.T.); +#61265 = ORIENTED_EDGE('',*,*,#60800,.F.); +#61266 = ORIENTED_EDGE('',*,*,#61267,.F.); +#61267 = EDGE_CURVE('',#60664,#60793,#61268,.T.); +#61268 = LINE('',#61269,#61270); +#61269 = CARTESIAN_POINT('',(-2.675,-1.7,1.32)); +#61270 = VECTOR('',#61271,1.); +#61271 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61272 = CYLINDRICAL_SURFACE('',#61273,0.15); +#61273 = AXIS2_PLACEMENT_3D('',#61274,#61275,#61276); +#61274 = CARTESIAN_POINT('',(-2.675,-1.7,1.17)); +#61275 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61276 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#61277 = ADVANCED_FACE('',(#61278,#61353),#61435,.F.); +#61278 = FACE_BOUND('',#61279,.F.); +#61279 = EDGE_LOOP('',(#61280,#61290,#61298,#61306,#61312,#61313,#61314, + #61315,#61323,#61331,#61339,#61347)); +#61280 = ORIENTED_EDGE('',*,*,#61281,.T.); +#61281 = EDGE_CURVE('',#61282,#61284,#61286,.T.); +#61282 = VERTEX_POINT('',#61283); +#61283 = CARTESIAN_POINT('',(2.675,1.7,1.32)); +#61284 = VERTEX_POINT('',#61285); +#61285 = CARTESIAN_POINT('',(2.675,0.675,1.32)); +#61286 = LINE('',#61287,#61288); +#61287 = CARTESIAN_POINT('',(2.675,1.85,1.32)); +#61288 = VECTOR('',#61289,1.); +#61289 = DIRECTION('',(0.,-1.,0.)); +#61290 = ORIENTED_EDGE('',*,*,#61291,.F.); +#61291 = EDGE_CURVE('',#61292,#61284,#61294,.T.); +#61292 = VERTEX_POINT('',#61293); +#61293 = CARTESIAN_POINT('',(2.675,0.525,1.32)); +#61294 = LINE('',#61295,#61296); +#61295 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61296 = VECTOR('',#61297,1.); +#61297 = DIRECTION('',(6.7E-16,1.,-3.3E-16)); +#61298 = ORIENTED_EDGE('',*,*,#61299,.F.); +#61299 = EDGE_CURVE('',#61300,#61292,#61302,.T.); +#61300 = VERTEX_POINT('',#61301); +#61301 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61302 = LINE('',#61303,#61304); +#61303 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61304 = VECTOR('',#61305,1.); +#61305 = DIRECTION('',(1.E-15,1.,1.E-30)); +#61306 = ORIENTED_EDGE('',*,*,#61307,.F.); +#61307 = EDGE_CURVE('',#60785,#61300,#61308,.T.); +#61308 = LINE('',#61309,#61310); +#61309 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#61310 = VECTOR('',#61311,1.); +#61311 = DIRECTION('',(6.7E-16,1.,-3.3E-16)); +#61312 = ORIENTED_EDGE('',*,*,#60792,.T.); +#61313 = ORIENTED_EDGE('',*,*,#61267,.F.); +#61314 = ORIENTED_EDGE('',*,*,#60663,.F.); +#61315 = ORIENTED_EDGE('',*,*,#61316,.F.); +#61316 = EDGE_CURVE('',#61317,#60656,#61319,.T.); +#61317 = VERTEX_POINT('',#61318); +#61318 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#61319 = LINE('',#61320,#61321); +#61320 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61321 = VECTOR('',#61322,1.); +#61322 = DIRECTION('',(0.,-1.,0.)); +#61323 = ORIENTED_EDGE('',*,*,#61324,.T.); +#61324 = EDGE_CURVE('',#61317,#61325,#61327,.T.); +#61325 = VERTEX_POINT('',#61326); +#61326 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#61327 = LINE('',#61328,#61329); +#61328 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#61329 = VECTOR('',#61330,1.); +#61330 = DIRECTION('',(5.6E-16,1.,-4.4E-16)); +#61331 = ORIENTED_EDGE('',*,*,#61332,.F.); +#61332 = EDGE_CURVE('',#61333,#61325,#61335,.T.); +#61333 = VERTEX_POINT('',#61334); +#61334 = CARTESIAN_POINT('',(-2.675,0.675,1.32)); +#61335 = LINE('',#61336,#61337); +#61336 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61337 = VECTOR('',#61338,1.); +#61338 = DIRECTION('',(0.,-1.,0.)); +#61339 = ORIENTED_EDGE('',*,*,#61340,.F.); +#61340 = EDGE_CURVE('',#61341,#61333,#61343,.T.); +#61341 = VERTEX_POINT('',#61342); +#61342 = CARTESIAN_POINT('',(-2.675,1.7,1.32)); +#61343 = LINE('',#61344,#61345); +#61344 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61345 = VECTOR('',#61346,1.); +#61346 = DIRECTION('',(0.,-1.,0.)); +#61347 = ORIENTED_EDGE('',*,*,#61348,.T.); +#61348 = EDGE_CURVE('',#61341,#61282,#61349,.T.); +#61349 = LINE('',#61350,#61351); +#61350 = CARTESIAN_POINT('',(-2.675,1.7,1.32)); +#61351 = VECTOR('',#61352,1.); +#61352 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61353 = FACE_BOUND('',#61354,.F.); +#61354 = EDGE_LOOP('',(#61355,#61365,#61377,#61385,#61397,#61405,#61417, + #61425)); +#61355 = ORIENTED_EDGE('',*,*,#61356,.F.); +#61356 = EDGE_CURVE('',#61357,#61359,#61361,.T.); +#61357 = VERTEX_POINT('',#61358); +#61358 = CARTESIAN_POINT('',(2.2875,1.095801166539,1.32)); +#61359 = VERTEX_POINT('',#61360); +#61360 = CARTESIAN_POINT('',(2.2875,-1.095801166539,1.32)); +#61361 = LINE('',#61362,#61363); +#61362 = CARTESIAN_POINT('',(2.2875,1.3925,1.32)); +#61363 = VECTOR('',#61364,1.); +#61364 = DIRECTION('',(0.,-1.,0.)); +#61365 = ORIENTED_EDGE('',*,*,#61366,.T.); +#61366 = EDGE_CURVE('',#61357,#61367,#61369,.T.); +#61367 = VERTEX_POINT('',#61368); +#61368 = CARTESIAN_POINT('',(1.990801166539,1.3925,1.32)); +#61369 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61370,#61371,#61372,#61373, + #61374,#61375,#61376),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61370 = CARTESIAN_POINT('',(2.2875,1.095801166539,1.32)); +#61371 = CARTESIAN_POINT('',(2.287499983534,1.180338062033,1.32)); +#61372 = CARTESIAN_POINT('',(2.262319815931,1.260742574749,1.32)); +#61373 = CARTESIAN_POINT('',(2.211876293414,1.328395537812,1.32)); +#61374 = CARTESIAN_POINT('',(2.141910175284,1.37328964386,1.32)); +#61375 = CARTESIAN_POINT('',(2.06439620365,1.392499985665,1.32)); +#61376 = CARTESIAN_POINT('',(1.990801166539,1.3925,1.32)); +#61377 = ORIENTED_EDGE('',*,*,#61378,.F.); +#61378 = EDGE_CURVE('',#61379,#61367,#61381,.T.); +#61379 = VERTEX_POINT('',#61380); +#61380 = CARTESIAN_POINT('',(-1.990801166539,1.3925,1.32)); +#61381 = LINE('',#61382,#61383); +#61382 = CARTESIAN_POINT('',(-2.2875,1.3925,1.32)); +#61383 = VECTOR('',#61384,1.); +#61384 = DIRECTION('',(1.,0.,0.)); +#61385 = ORIENTED_EDGE('',*,*,#61386,.F.); +#61386 = EDGE_CURVE('',#61387,#61379,#61389,.T.); +#61387 = VERTEX_POINT('',#61388); +#61388 = CARTESIAN_POINT('',(-2.2875,1.095801166539,1.32)); +#61389 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61390,#61391,#61392,#61393, + #61394,#61395,#61396),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61390 = CARTESIAN_POINT('',(-2.2875,1.095801166539,1.32)); +#61391 = CARTESIAN_POINT('',(-2.287499983534,1.180338062267,1.32)); +#61392 = CARTESIAN_POINT('',(-2.262319815936,1.260742574684,1.32)); +#61393 = CARTESIAN_POINT('',(-2.211876293412,1.328395537822,1.32)); +#61394 = CARTESIAN_POINT('',(-2.141910175285,1.373289643859,1.32)); +#61395 = CARTESIAN_POINT('',(-2.06439620365,1.392499985665,1.32)); +#61396 = CARTESIAN_POINT('',(-1.990801166539,1.3925,1.32)); +#61397 = ORIENTED_EDGE('',*,*,#61398,.F.); +#61398 = EDGE_CURVE('',#61399,#61387,#61401,.T.); +#61399 = VERTEX_POINT('',#61400); +#61400 = CARTESIAN_POINT('',(-2.2875,-1.095801166539,1.32)); +#61401 = LINE('',#61402,#61403); +#61402 = CARTESIAN_POINT('',(-2.2875,-1.3925,1.32)); +#61403 = VECTOR('',#61404,1.); +#61404 = DIRECTION('',(0.,1.,0.)); +#61405 = ORIENTED_EDGE('',*,*,#61406,.F.); +#61406 = EDGE_CURVE('',#61407,#61399,#61409,.T.); +#61407 = VERTEX_POINT('',#61408); +#61408 = CARTESIAN_POINT('',(-1.990801166539,-1.3925,1.32)); +#61409 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61410,#61411,#61412,#61413, + #61414,#61415,#61416),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61410 = CARTESIAN_POINT('',(-1.990801166539,-1.3925,1.32)); +#61411 = CARTESIAN_POINT('',(-2.075338062122,-1.392499983534,1.32)); +#61412 = CARTESIAN_POINT('',(-2.155742574723,-1.36731981593,1.32)); +#61413 = CARTESIAN_POINT('',(-2.223395537816,-1.316876293414,1.32)); +#61414 = CARTESIAN_POINT('',(-2.26828964386,-1.246910175284,1.32)); +#61415 = CARTESIAN_POINT('',(-2.287499985665,-1.16939620365,1.32)); +#61416 = CARTESIAN_POINT('',(-2.2875,-1.095801166539,1.32)); +#61417 = ORIENTED_EDGE('',*,*,#61418,.F.); +#61418 = EDGE_CURVE('',#61419,#61407,#61421,.T.); +#61419 = VERTEX_POINT('',#61420); +#61420 = CARTESIAN_POINT('',(1.990801166539,-1.3925,1.32)); +#61421 = LINE('',#61422,#61423); +#61422 = CARTESIAN_POINT('',(2.2875,-1.3925,1.32)); +#61423 = VECTOR('',#61424,1.); +#61424 = DIRECTION('',(-1.,0.,0.)); +#61425 = ORIENTED_EDGE('',*,*,#61426,.F.); +#61426 = EDGE_CURVE('',#61359,#61419,#61427,.T.); +#61427 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#61428,#61429,#61430,#61431, + #61432,#61433,#61434),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61428 = CARTESIAN_POINT('',(2.2875,-1.095801166539,1.32)); +#61429 = CARTESIAN_POINT('',(2.287499983534,-1.180338062137,1.32)); +#61430 = CARTESIAN_POINT('',(2.262319815928,-1.260742574719,1.32)); +#61431 = CARTESIAN_POINT('',(2.211876293415,-1.328395537817,1.32)); +#61432 = CARTESIAN_POINT('',(2.141910175284,-1.37328964386,1.32)); +#61433 = CARTESIAN_POINT('',(2.06439620365,-1.392499985665,1.32)); +#61434 = CARTESIAN_POINT('',(1.990801166539,-1.3925,1.32)); +#61435 = PLANE('',#61436); +#61436 = AXIS2_PLACEMENT_3D('',#61437,#61438,#61439); +#61437 = CARTESIAN_POINT('',(-2.675,1.85,1.32)); +#61438 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#61439 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#61440 = ADVANCED_FACE('',(#61441),#61468,.F.); +#61441 = FACE_BOUND('',#61442,.F.); +#61442 = EDGE_LOOP('',(#61443,#61444,#61453,#61461)); +#61443 = ORIENTED_EDGE('',*,*,#60784,.T.); +#61444 = ORIENTED_EDGE('',*,*,#61445,.T.); +#61445 = EDGE_CURVE('',#60785,#61446,#61448,.T.); +#61446 = VERTEX_POINT('',#61447); +#61447 = CARTESIAN_POINT('',(2.825,-0.525,1.32)); +#61448 = CIRCLE('',#61449,0.15); +#61449 = AXIS2_PLACEMENT_3D('',#61450,#61451,#61452); +#61450 = CARTESIAN_POINT('',(2.825,-0.675,1.32)); +#61451 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#61452 = DIRECTION('',(1.,0.,7.2E-16)); +#61453 = ORIENTED_EDGE('',*,*,#61454,.F.); +#61454 = EDGE_CURVE('',#61455,#61446,#61457,.T.); +#61455 = VERTEX_POINT('',#61456); +#61456 = CARTESIAN_POINT('',(2.825,-0.525,1.2)); +#61457 = LINE('',#61458,#61459); +#61458 = CARTESIAN_POINT('',(2.825,-0.525,1.2)); +#61459 = VECTOR('',#61460,1.); +#61460 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#61461 = ORIENTED_EDGE('',*,*,#61462,.F.); +#61462 = EDGE_CURVE('',#60777,#61455,#61463,.T.); +#61463 = CIRCLE('',#61464,0.15); +#61464 = AXIS2_PLACEMENT_3D('',#61465,#61466,#61467); +#61465 = CARTESIAN_POINT('',(2.825,-0.675,1.2)); +#61466 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#61467 = DIRECTION('',(1.,0.,7.2E-16)); +#61468 = CYLINDRICAL_SURFACE('',#61469,0.15); +#61469 = AXIS2_PLACEMENT_3D('',#61470,#61471,#61472); +#61470 = CARTESIAN_POINT('',(2.825,-0.675,1.2)); +#61471 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#61472 = DIRECTION('',(-1.,2.2E-16,-7.2E-16)); +#61473 = ADVANCED_FACE('',(#61474),#61492,.T.); +#61474 = FACE_BOUND('',#61475,.F.); +#61475 = EDGE_LOOP('',(#61476,#61477,#61485,#61491)); +#61476 = ORIENTED_EDGE('',*,*,#60874,.F.); +#61477 = ORIENTED_EDGE('',*,*,#61478,.T.); +#61478 = EDGE_CURVE('',#60867,#61479,#61481,.T.); +#61479 = VERTEX_POINT('',#61480); +#61480 = CARTESIAN_POINT('',(2.725,-1.85,0.66)); +#61481 = LINE('',#61482,#61483); +#61482 = CARTESIAN_POINT('',(2.725,-1.73,0.66)); +#61483 = VECTOR('',#61484,1.); +#61484 = DIRECTION('',(-8.9E-16,-1.,4.4E-16)); +#61485 = ORIENTED_EDGE('',*,*,#61486,.T.); +#61486 = EDGE_CURVE('',#61479,#60810,#61487,.T.); +#61487 = LINE('',#61488,#61489); +#61488 = CARTESIAN_POINT('',(2.675,-1.85,0.66)); +#61489 = VECTOR('',#61490,1.); +#61490 = DIRECTION('',(-1.,8.9E-16,-1.7E-16)); +#61491 = ORIENTED_EDGE('',*,*,#60817,.F.); +#61492 = PLANE('',#61493); +#61493 = AXIS2_PLACEMENT_3D('',#61494,#61495,#61496); +#61494 = CARTESIAN_POINT('',(2.675,-1.73,0.66)); +#61495 = DIRECTION('',(-6.1E-16,4.4E-16,1.)); +#61496 = DIRECTION('',(8.9E-16,1.,-4.4E-16)); +#61497 = ADVANCED_FACE('',(#61498),#61516,.T.); +#61498 = FACE_BOUND('',#61499,.F.); +#61499 = EDGE_LOOP('',(#61500,#61508,#61514,#61515)); +#61500 = ORIENTED_EDGE('',*,*,#61501,.F.); +#61501 = EDGE_CURVE('',#61502,#60923,#61504,.T.); +#61502 = VERTEX_POINT('',#61503); +#61503 = CARTESIAN_POINT('',(2.725,-1.85,0.1)); +#61504 = LINE('',#61505,#61506); +#61505 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#61506 = VECTOR('',#61507,1.); +#61507 = DIRECTION('',(-1.,8.9E-16,-4.4E-16)); +#61508 = ORIENTED_EDGE('',*,*,#61509,.T.); +#61509 = EDGE_CURVE('',#61502,#60859,#61510,.T.); +#61510 = LINE('',#61511,#61512); +#61511 = CARTESIAN_POINT('',(2.725,-1.85,0.1)); +#61512 = VECTOR('',#61513,1.); +#61513 = DIRECTION('',(8.9E-16,1.,2.5E-16)); +#61514 = ORIENTED_EDGE('',*,*,#60858,.T.); +#61515 = ORIENTED_EDGE('',*,*,#60930,.F.); +#61516 = PLANE('',#61517); +#61517 = AXIS2_PLACEMENT_3D('',#61518,#61519,#61520); +#61518 = CARTESIAN_POINT('',(2.675,-1.85,0.1)); +#61519 = DIRECTION('',(6.1E-16,2.5E-16,-1.)); +#61520 = DIRECTION('',(-8.9E-16,-1.,-2.5E-16)); +#61521 = ADVANCED_FACE('',(#61522),#61549,.F.); +#61522 = FACE_BOUND('',#61523,.F.); +#61523 = EDGE_LOOP('',(#61524,#61534,#61541,#61542)); +#61524 = ORIENTED_EDGE('',*,*,#61525,.T.); +#61525 = EDGE_CURVE('',#61526,#61528,#61530,.T.); +#61526 = VERTEX_POINT('',#61527); +#61527 = CARTESIAN_POINT('',(2.775,-1.68,0.1)); +#61528 = VERTEX_POINT('',#61529); +#61529 = CARTESIAN_POINT('',(2.775,-1.68,0.66)); +#61530 = LINE('',#61531,#61532); +#61531 = CARTESIAN_POINT('',(2.775,-1.68,0.1)); +#61532 = VECTOR('',#61533,1.); +#61533 = DIRECTION('',(-1.39E-15,-3.9E-16,1.)); +#61534 = ORIENTED_EDGE('',*,*,#61535,.T.); +#61535 = EDGE_CURVE('',#61528,#60867,#61536,.T.); +#61536 = CIRCLE('',#61537,5.E-02); +#61537 = AXIS2_PLACEMENT_3D('',#61538,#61539,#61540); +#61538 = CARTESIAN_POINT('',(2.725,-1.68,0.66)); +#61539 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#61540 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#61541 = ORIENTED_EDGE('',*,*,#60866,.F.); +#61542 = ORIENTED_EDGE('',*,*,#61543,.F.); +#61543 = EDGE_CURVE('',#61526,#60859,#61544,.T.); +#61544 = CIRCLE('',#61545,5.E-02); +#61545 = AXIS2_PLACEMENT_3D('',#61546,#61547,#61548); +#61546 = CARTESIAN_POINT('',(2.725,-1.68,0.1)); +#61547 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#61548 = DIRECTION('',(7.55E-15,-1.,-1.7E-16)); +#61549 = CYLINDRICAL_SURFACE('',#61550,5.E-02); +#61550 = AXIS2_PLACEMENT_3D('',#61551,#61552,#61553); +#61551 = CARTESIAN_POINT('',(2.725,-1.68,0.1)); +#61552 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#61553 = DIRECTION('',(7.55E-15,-1.,-1.7E-16)); +#61554 = ADVANCED_FACE('',(#61555),#61566,.T.); +#61555 = FACE_BOUND('',#61556,.T.); +#61556 = EDGE_LOOP('',(#61557,#61558,#61564,#61565)); +#61557 = ORIENTED_EDGE('',*,*,#61065,.F.); +#61558 = ORIENTED_EDGE('',*,*,#61559,.F.); +#61559 = EDGE_CURVE('',#60963,#61058,#61560,.T.); +#61560 = LINE('',#61561,#61562); +#61561 = CARTESIAN_POINT('',(-2.725,-1.85,0.66)); +#61562 = VECTOR('',#61563,1.); +#61563 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61564 = ORIENTED_EDGE('',*,*,#60962,.T.); +#61565 = ORIENTED_EDGE('',*,*,#60987,.F.); +#61566 = PLANE('',#61567); +#61567 = AXIS2_PLACEMENT_3D('',#61568,#61569,#61570); +#61568 = CARTESIAN_POINT('',(-2.675,-1.85,0.66)); +#61569 = DIRECTION('',(-4.4E-16,-1.,1.E-15)); +#61570 = DIRECTION('',(3.3E-16,-1.E-15,-1.)); +#61571 = ADVANCED_FACE('',(#61572),#61591,.F.); +#61572 = FACE_BOUND('',#61573,.F.); +#61573 = EDGE_LOOP('',(#61574,#61583,#61584,#61585)); +#61574 = ORIENTED_EDGE('',*,*,#61575,.T.); +#61575 = EDGE_CURVE('',#61576,#60963,#61578,.T.); +#61576 = VERTEX_POINT('',#61577); +#61577 = CARTESIAN_POINT('',(-2.895,-1.68,0.1)); +#61578 = CIRCLE('',#61579,0.17); +#61579 = AXIS2_PLACEMENT_3D('',#61580,#61581,#61582); +#61580 = CARTESIAN_POINT('',(-2.725,-1.68,0.1)); +#61581 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61582 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#61583 = ORIENTED_EDGE('',*,*,#60970,.T.); +#61584 = ORIENTED_EDGE('',*,*,#61023,.F.); +#61585 = ORIENTED_EDGE('',*,*,#61586,.F.); +#61586 = EDGE_CURVE('',#61576,#61024,#61587,.T.); +#61587 = LINE('',#61588,#61589); +#61588 = CARTESIAN_POINT('',(-2.895,-1.68,0.1)); +#61589 = VECTOR('',#61590,1.); +#61590 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#61591 = PLANE('',#61592); +#61592 = AXIS2_PLACEMENT_3D('',#61593,#61594,#61595); +#61593 = CARTESIAN_POINT('',(-2.802781745931,-1.757781745931,0.1)); +#61594 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61595 = DIRECTION('',(0.707106781187,-0.707106781187,7.990306627408E-16 + )); +#61596 = ADVANCED_FACE('',(#61597),#61608,.T.); +#61597 = FACE_BOUND('',#61598,.F.); +#61598 = EDGE_LOOP('',(#61599,#61600,#61606,#61607)); +#61599 = ORIENTED_EDGE('',*,*,#61486,.F.); +#61600 = ORIENTED_EDGE('',*,*,#61601,.F.); +#61601 = EDGE_CURVE('',#61502,#61479,#61602,.T.); +#61602 = LINE('',#61603,#61604); +#61603 = CARTESIAN_POINT('',(2.725,-1.85,0.66)); +#61604 = VECTOR('',#61605,1.); +#61605 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#61606 = ORIENTED_EDGE('',*,*,#61501,.T.); +#61607 = ORIENTED_EDGE('',*,*,#61001,.F.); +#61608 = PLANE('',#61609); +#61609 = AXIS2_PLACEMENT_3D('',#61610,#61611,#61612); +#61610 = CARTESIAN_POINT('',(2.675,-1.85,0.66)); +#61611 = DIRECTION('',(-8.9E-16,-1.,6.7E-16)); +#61612 = DIRECTION('',(-8.9E-16,6.7E-16,1.)); +#61613 = ADVANCED_FACE('',(#61614),#61657,.T.); +#61614 = FACE_BOUND('',#61615,.T.); +#61615 = EDGE_LOOP('',(#61616,#61624,#61633,#61641,#61650,#61656)); +#61616 = ORIENTED_EDGE('',*,*,#61617,.F.); +#61617 = EDGE_CURVE('',#61618,#61024,#61620,.T.); +#61618 = VERTEX_POINT('',#61619); +#61619 = CARTESIAN_POINT('',(-2.775,-1.01,0.1)); +#61620 = LINE('',#61621,#61622); +#61621 = CARTESIAN_POINT('',(-2.775,-0.87,0.1)); +#61622 = VECTOR('',#61623,1.); +#61623 = DIRECTION('',(-2.16E-15,-1.,2.2E-16)); +#61624 = ORIENTED_EDGE('',*,*,#61625,.T.); +#61625 = EDGE_CURVE('',#61618,#61626,#61628,.T.); +#61626 = VERTEX_POINT('',#61627); +#61627 = CARTESIAN_POINT('',(-2.775,-0.87,0.24)); +#61628 = CIRCLE('',#61629,0.14); +#61629 = AXIS2_PLACEMENT_3D('',#61630,#61631,#61632); +#61630 = CARTESIAN_POINT('',(-2.775,-1.01,0.24)); +#61631 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#61632 = DIRECTION('',(-2.16E-15,-1.,1.E-15)); +#61633 = ORIENTED_EDGE('',*,*,#61634,.T.); +#61634 = EDGE_CURVE('',#61626,#61635,#61637,.T.); +#61635 = VERTEX_POINT('',#61636); +#61636 = CARTESIAN_POINT('',(-2.775,-0.87,0.52)); +#61637 = LINE('',#61638,#61639); +#61638 = CARTESIAN_POINT('',(-2.775,-0.87,0.1)); +#61639 = VECTOR('',#61640,1.); +#61640 = DIRECTION('',(1.7E-16,-5.E-17,1.)); +#61641 = ORIENTED_EDGE('',*,*,#61642,.F.); +#61642 = EDGE_CURVE('',#61643,#61635,#61645,.T.); +#61643 = VERTEX_POINT('',#61644); +#61644 = CARTESIAN_POINT('',(-2.775,-1.01,0.66)); +#61645 = CIRCLE('',#61646,0.14); +#61646 = AXIS2_PLACEMENT_3D('',#61647,#61648,#61649); +#61647 = CARTESIAN_POINT('',(-2.775,-1.01,0.52)); +#61648 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#61649 = DIRECTION('',(2.16E-15,1.,-1.E-15)); +#61650 = ORIENTED_EDGE('',*,*,#61651,.T.); +#61651 = EDGE_CURVE('',#61643,#61034,#61652,.T.); +#61652 = LINE('',#61653,#61654); +#61653 = CARTESIAN_POINT('',(-2.775,-0.87,0.66)); +#61654 = VECTOR('',#61655,1.); +#61655 = DIRECTION('',(-2.16E-15,-1.,2.2E-16)); +#61656 = ORIENTED_EDGE('',*,*,#61042,.F.); +#61657 = PLANE('',#61658); +#61658 = AXIS2_PLACEMENT_3D('',#61659,#61660,#61661); +#61659 = CARTESIAN_POINT('',(-2.775,-0.87,0.1)); +#61660 = DIRECTION('',(1.,-4.4E-16,-1.7E-16)); +#61661 = DIRECTION('',(1.7E-16,-5.E-17,1.)); +#61662 = ADVANCED_FACE('',(#61663),#61682,.F.); +#61663 = FACE_BOUND('',#61664,.F.); +#61664 = EDGE_LOOP('',(#61665,#61666,#61667,#61676)); +#61665 = ORIENTED_EDGE('',*,*,#61033,.T.); +#61666 = ORIENTED_EDGE('',*,*,#61057,.T.); +#61667 = ORIENTED_EDGE('',*,*,#61668,.F.); +#61668 = EDGE_CURVE('',#61669,#61058,#61671,.T.); +#61669 = VERTEX_POINT('',#61670); +#61670 = CARTESIAN_POINT('',(-2.895,-1.68,0.66)); +#61671 = CIRCLE('',#61672,0.17); +#61672 = AXIS2_PLACEMENT_3D('',#61673,#61674,#61675); +#61673 = CARTESIAN_POINT('',(-2.725,-1.68,0.66)); +#61674 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#61675 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#61676 = ORIENTED_EDGE('',*,*,#61677,.F.); +#61677 = EDGE_CURVE('',#61034,#61669,#61678,.T.); +#61678 = LINE('',#61679,#61680); +#61679 = CARTESIAN_POINT('',(-2.775,-1.68,0.66)); +#61680 = VECTOR('',#61681,1.); +#61681 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#61682 = PLANE('',#61683); +#61683 = AXIS2_PLACEMENT_3D('',#61684,#61685,#61686); +#61684 = CARTESIAN_POINT('',(-2.802781745931,-1.757781745931,0.66)); +#61685 = DIRECTION('',(9.6E-16,-1.7E-16,-1.)); +#61686 = DIRECTION('',(0.707106781187,-0.707106781187,7.990306627408E-16 + )); +#61687 = ADVANCED_FACE('',(#61688),#61725,.T.); +#61688 = FACE_BOUND('',#61689,.T.); +#61689 = EDGE_LOOP('',(#61690,#61700,#61708,#61714,#61715,#61716,#61717, + #61718)); +#61690 = ORIENTED_EDGE('',*,*,#61691,.T.); +#61691 = EDGE_CURVE('',#61692,#61694,#61696,.T.); +#61692 = VERTEX_POINT('',#61693); +#61693 = CARTESIAN_POINT('',(2.825,0.525,1.2)); +#61694 = VERTEX_POINT('',#61695); +#61695 = CARTESIAN_POINT('',(2.925,0.525,1.2)); +#61696 = LINE('',#61697,#61698); +#61697 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61698 = VECTOR('',#61699,1.); +#61699 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#61700 = ORIENTED_EDGE('',*,*,#61701,.T.); +#61701 = EDGE_CURVE('',#61694,#61702,#61704,.T.); +#61702 = VERTEX_POINT('',#61703); +#61703 = CARTESIAN_POINT('',(2.925,-0.525,1.2)); +#61704 = LINE('',#61705,#61706); +#61705 = CARTESIAN_POINT('',(2.925,0.525,1.2)); +#61706 = VECTOR('',#61707,1.); +#61707 = DIRECTION('',(-1.E-15,-1.,-1.E-30)); +#61708 = ORIENTED_EDGE('',*,*,#61709,.F.); +#61709 = EDGE_CURVE('',#61455,#61702,#61710,.T.); +#61710 = LINE('',#61711,#61712); +#61711 = CARTESIAN_POINT('',(2.675,-0.525,1.2)); +#61712 = VECTOR('',#61713,1.); +#61713 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#61714 = ORIENTED_EDGE('',*,*,#61462,.F.); +#61715 = ORIENTED_EDGE('',*,*,#61081,.F.); +#61716 = ORIENTED_EDGE('',*,*,#61089,.F.); +#61717 = ORIENTED_EDGE('',*,*,#61097,.F.); +#61718 = ORIENTED_EDGE('',*,*,#61719,.T.); +#61719 = EDGE_CURVE('',#61098,#61692,#61720,.T.); +#61720 = CIRCLE('',#61721,0.15); +#61721 = AXIS2_PLACEMENT_3D('',#61722,#61723,#61724); +#61722 = CARTESIAN_POINT('',(2.825,0.675,1.2)); +#61723 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#61724 = DIRECTION('',(-1.,0.,-7.2E-16)); +#61725 = PLANE('',#61726); +#61726 = AXIS2_PLACEMENT_3D('',#61727,#61728,#61729); +#61727 = CARTESIAN_POINT('',(2.675,0.525,1.2)); +#61728 = DIRECTION('',(5.6E-16,-3.3E-16,-1.)); +#61729 = DIRECTION('',(-6.7E-16,-1.,3.3E-16)); +#61730 = ADVANCED_FACE('',(#61731),#61741,.T.); +#61731 = FACE_BOUND('',#61732,.F.); +#61732 = EDGE_LOOP('',(#61733,#61734,#61740)); +#61733 = ORIENTED_EDGE('',*,*,#61145,.T.); +#61734 = ORIENTED_EDGE('',*,*,#61735,.T.); +#61735 = EDGE_CURVE('',#61138,#61232,#61736,.T.); +#61736 = LINE('',#61737,#61738); +#61737 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#61738 = VECTOR('',#61739,1.); +#61739 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61740 = ORIENTED_EDGE('',*,*,#61231,.F.); +#61741 = PLANE('',#61742); +#61742 = AXIS2_PLACEMENT_3D('',#61743,#61744,#61745); +#61743 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61744 = DIRECTION('',(1.1E-16,-1.1E-16,-1.)); +#61745 = DIRECTION('',(4.4E-16,1.,-1.1E-16)); +#61746 = ADVANCED_FACE('',(#61747),#61781,.T.); +#61747 = FACE_BOUND('',#61748,.F.); +#61748 = EDGE_LOOP('',(#61749,#61757,#61765,#61773,#61779,#61780)); +#61749 = ORIENTED_EDGE('',*,*,#61750,.T.); +#61750 = EDGE_CURVE('',#61130,#61751,#61753,.T.); +#61751 = VERTEX_POINT('',#61752); +#61752 = CARTESIAN_POINT('',(-2.825,0.525,1.2)); +#61753 = LINE('',#61754,#61755); +#61754 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61755 = VECTOR('',#61756,1.); +#61756 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61757 = ORIENTED_EDGE('',*,*,#61758,.T.); +#61758 = EDGE_CURVE('',#61751,#61759,#61761,.T.); +#61759 = VERTEX_POINT('',#61760); +#61760 = CARTESIAN_POINT('',(-2.925,0.525,1.2)); +#61761 = LINE('',#61762,#61763); +#61762 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61763 = VECTOR('',#61764,1.); +#61764 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61765 = ORIENTED_EDGE('',*,*,#61766,.T.); +#61766 = EDGE_CURVE('',#61759,#61767,#61769,.T.); +#61767 = VERTEX_POINT('',#61768); +#61768 = CARTESIAN_POINT('',(-2.925,-0.525,1.2)); +#61769 = LINE('',#61770,#61771); +#61770 = CARTESIAN_POINT('',(-2.925,0.525,1.2)); +#61771 = VECTOR('',#61772,1.); +#61772 = DIRECTION('',(-5.6E-16,-1.,4.4E-16)); +#61773 = ORIENTED_EDGE('',*,*,#61774,.F.); +#61774 = EDGE_CURVE('',#61232,#61767,#61775,.T.); +#61775 = LINE('',#61776,#61777); +#61776 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#61777 = VECTOR('',#61778,1.); +#61778 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#61779 = ORIENTED_EDGE('',*,*,#61735,.F.); +#61780 = ORIENTED_EDGE('',*,*,#61137,.F.); +#61781 = PLANE('',#61782); +#61782 = AXIS2_PLACEMENT_3D('',#61783,#61784,#61785); +#61783 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61784 = DIRECTION('',(1.1E-16,-1.1E-16,-1.)); +#61785 = DIRECTION('',(4.4E-16,1.,-1.1E-16)); +#61786 = ADVANCED_FACE('',(#61787),#61837,.T.); +#61787 = FACE_BOUND('',#61788,.T.); +#61788 = EDGE_LOOP('',(#61789,#61790,#61799,#61807,#61815,#61823,#61830, + #61831)); +#61789 = ORIENTED_EDGE('',*,*,#61105,.T.); +#61790 = ORIENTED_EDGE('',*,*,#61791,.T.); +#61791 = EDGE_CURVE('',#61106,#61792,#61794,.T.); +#61792 = VERTEX_POINT('',#61793); +#61793 = CARTESIAN_POINT('',(2.675,1.73,1.15)); +#61794 = CIRCLE('',#61795,5.E-02); +#61795 = AXIS2_PLACEMENT_3D('',#61796,#61797,#61798); +#61796 = CARTESIAN_POINT('',(2.675,1.68,1.15)); +#61797 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61798 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61799 = ORIENTED_EDGE('',*,*,#61800,.T.); +#61800 = EDGE_CURVE('',#61792,#61801,#61803,.T.); +#61801 = VERTEX_POINT('',#61802); +#61802 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#61803 = LINE('',#61804,#61805); +#61804 = CARTESIAN_POINT('',(2.675,1.73,1.2)); +#61805 = VECTOR('',#61806,1.); +#61806 = DIRECTION('',(0.,0.,-1.)); +#61807 = ORIENTED_EDGE('',*,*,#61808,.T.); +#61808 = EDGE_CURVE('',#61801,#61809,#61811,.T.); +#61809 = VERTEX_POINT('',#61810); +#61810 = CARTESIAN_POINT('',(2.675,1.85,0.66)); +#61811 = LINE('',#61812,#61813); +#61812 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#61813 = VECTOR('',#61814,1.); +#61814 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#61815 = ORIENTED_EDGE('',*,*,#61816,.T.); +#61816 = EDGE_CURVE('',#61809,#61817,#61819,.T.); +#61817 = VERTEX_POINT('',#61818); +#61818 = CARTESIAN_POINT('',(2.675,1.85,1.17)); +#61819 = LINE('',#61820,#61821); +#61820 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#61821 = VECTOR('',#61822,1.); +#61822 = DIRECTION('',(0.,0.,1.)); +#61823 = ORIENTED_EDGE('',*,*,#61824,.F.); +#61824 = EDGE_CURVE('',#61282,#61817,#61825,.T.); +#61825 = CIRCLE('',#61826,0.15); +#61826 = AXIS2_PLACEMENT_3D('',#61827,#61828,#61829); +#61827 = CARTESIAN_POINT('',(2.675,1.7,1.17)); +#61828 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61829 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61830 = ORIENTED_EDGE('',*,*,#61281,.T.); +#61831 = ORIENTED_EDGE('',*,*,#61832,.T.); +#61832 = EDGE_CURVE('',#61284,#61098,#61833,.T.); +#61833 = LINE('',#61834,#61835); +#61834 = CARTESIAN_POINT('',(2.675,0.675,1.32)); +#61835 = VECTOR('',#61836,1.); +#61836 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#61837 = PLANE('',#61838); +#61838 = AXIS2_PLACEMENT_3D('',#61839,#61840,#61841); +#61839 = CARTESIAN_POINT('',(2.675,-8.3E-16,1.015149501661)); +#61840 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#61841 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#61842 = ADVANCED_FACE('',(#61843),#61854,.T.); +#61843 = FACE_BOUND('',#61844,.F.); +#61844 = EDGE_LOOP('',(#61845,#61852,#61853)); +#61845 = ORIENTED_EDGE('',*,*,#61846,.T.); +#61846 = EDGE_CURVE('',#61122,#61751,#61847,.T.); +#61847 = CIRCLE('',#61848,0.15); +#61848 = AXIS2_PLACEMENT_3D('',#61849,#61850,#61851); +#61849 = CARTESIAN_POINT('',(-2.825,0.675,1.2)); +#61850 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#61851 = DIRECTION('',(1.,-1.11E-15,-6.E-17)); +#61852 = ORIENTED_EDGE('',*,*,#61750,.F.); +#61853 = ORIENTED_EDGE('',*,*,#61129,.T.); +#61854 = PLANE('',#61855); +#61855 = AXIS2_PLACEMENT_3D('',#61856,#61857,#61858); +#61856 = CARTESIAN_POINT('',(-2.675,0.525,1.2)); +#61857 = DIRECTION('',(1.1E-16,-1.1E-16,-1.)); +#61858 = DIRECTION('',(4.4E-16,1.,-1.1E-16)); +#61859 = ADVANCED_FACE('',(#61860),#61879,.F.); +#61860 = FACE_BOUND('',#61861,.F.); +#61861 = EDGE_LOOP('',(#61862,#61863,#61864,#61872)); +#61862 = ORIENTED_EDGE('',*,*,#61113,.T.); +#61863 = ORIENTED_EDGE('',*,*,#61791,.T.); +#61864 = ORIENTED_EDGE('',*,*,#61865,.F.); +#61865 = EDGE_CURVE('',#61866,#61792,#61868,.T.); +#61866 = VERTEX_POINT('',#61867); +#61867 = CARTESIAN_POINT('',(-2.675,1.73,1.15)); +#61868 = LINE('',#61869,#61870); +#61869 = CARTESIAN_POINT('',(-2.675,1.73,1.15)); +#61870 = VECTOR('',#61871,1.); +#61871 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61872 = ORIENTED_EDGE('',*,*,#61873,.F.); +#61873 = EDGE_CURVE('',#61114,#61866,#61874,.T.); +#61874 = CIRCLE('',#61875,5.E-02); +#61875 = AXIS2_PLACEMENT_3D('',#61876,#61877,#61878); +#61876 = CARTESIAN_POINT('',(-2.675,1.68,1.15)); +#61877 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61878 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61879 = CYLINDRICAL_SURFACE('',#61880,5.E-02); +#61880 = AXIS2_PLACEMENT_3D('',#61881,#61882,#61883); +#61881 = CARTESIAN_POINT('',(-2.675,1.68,1.15)); +#61882 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#61883 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#61884 = ADVANCED_FACE('',(#61885),#61927,.F.); +#61885 = FACE_BOUND('',#61886,.F.); +#61886 = EDGE_LOOP('',(#61887,#61888,#61889,#61897,#61905,#61913,#61920, + #61921)); +#61887 = ORIENTED_EDGE('',*,*,#61121,.T.); +#61888 = ORIENTED_EDGE('',*,*,#61873,.T.); +#61889 = ORIENTED_EDGE('',*,*,#61890,.T.); +#61890 = EDGE_CURVE('',#61866,#61891,#61893,.T.); +#61891 = VERTEX_POINT('',#61892); +#61892 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#61893 = LINE('',#61894,#61895); +#61894 = CARTESIAN_POINT('',(-2.675,1.73,1.2)); +#61895 = VECTOR('',#61896,1.); +#61896 = DIRECTION('',(0.,0.,-1.)); +#61897 = ORIENTED_EDGE('',*,*,#61898,.T.); +#61898 = EDGE_CURVE('',#61891,#61899,#61901,.T.); +#61899 = VERTEX_POINT('',#61900); +#61900 = CARTESIAN_POINT('',(-2.675,1.85,0.66)); +#61901 = LINE('',#61902,#61903); +#61902 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#61903 = VECTOR('',#61904,1.); +#61904 = DIRECTION('',(6.7E-16,1.,-4.4E-16)); +#61905 = ORIENTED_EDGE('',*,*,#61906,.T.); +#61906 = EDGE_CURVE('',#61899,#61907,#61909,.T.); +#61907 = VERTEX_POINT('',#61908); +#61908 = CARTESIAN_POINT('',(-2.675,1.85,1.17)); +#61909 = LINE('',#61910,#61911); +#61910 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#61911 = VECTOR('',#61912,1.); +#61912 = DIRECTION('',(0.,0.,1.)); +#61913 = ORIENTED_EDGE('',*,*,#61914,.F.); +#61914 = EDGE_CURVE('',#61341,#61907,#61915,.T.); +#61915 = CIRCLE('',#61916,0.15); +#61916 = AXIS2_PLACEMENT_3D('',#61917,#61918,#61919); +#61917 = CARTESIAN_POINT('',(-2.675,1.7,1.17)); +#61918 = DIRECTION('',(-1.,4.4E-16,-5.E-16)); +#61919 = DIRECTION('',(5.E-16,-7.851184578146E-48,-1.)); +#61920 = ORIENTED_EDGE('',*,*,#61340,.T.); +#61921 = ORIENTED_EDGE('',*,*,#61922,.T.); +#61922 = EDGE_CURVE('',#61333,#61122,#61923,.T.); +#61923 = LINE('',#61924,#61925); +#61924 = CARTESIAN_POINT('',(-2.675,0.675,1.32)); +#61925 = VECTOR('',#61926,1.); +#61926 = DIRECTION('',(-6.E-17,1.1E-16,-1.)); +#61927 = PLANE('',#61928); +#61928 = AXIS2_PLACEMENT_3D('',#61929,#61930,#61931); +#61929 = CARTESIAN_POINT('',(-2.675,1.17E-15,1.015149501661)); +#61930 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#61931 = DIRECTION('',(-2.2E-16,-1.741711239665E-48,1.)); +#61932 = ADVANCED_FACE('',(#61933),#61958,.T.); +#61933 = FACE_BOUND('',#61934,.T.); +#61934 = EDGE_LOOP('',(#61935,#61945,#61951,#61952)); +#61935 = ORIENTED_EDGE('',*,*,#61936,.F.); +#61936 = EDGE_CURVE('',#61937,#61939,#61941,.T.); +#61937 = VERTEX_POINT('',#61938); +#61938 = CARTESIAN_POINT('',(-1.255,0.705,1.9)); +#61939 = VERTEX_POINT('',#61940); +#61940 = CARTESIAN_POINT('',(1.255,0.705,1.9)); +#61941 = LINE('',#61942,#61943); +#61942 = CARTESIAN_POINT('',(-1.405,0.705,1.9)); +#61943 = VECTOR('',#61944,1.); +#61944 = DIRECTION('',(1.,0.,0.)); +#61945 = ORIENTED_EDGE('',*,*,#61946,.T.); +#61946 = EDGE_CURVE('',#61937,#61156,#61947,.T.); +#61947 = LINE('',#61948,#61949); +#61948 = CARTESIAN_POINT('',(-1.255,0.705,1.9)); +#61949 = VECTOR('',#61950,1.); +#61950 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61951 = ORIENTED_EDGE('',*,*,#61155,.T.); +#61952 = ORIENTED_EDGE('',*,*,#61953,.F.); +#61953 = EDGE_CURVE('',#61939,#61158,#61954,.T.); +#61954 = LINE('',#61955,#61956); +#61955 = CARTESIAN_POINT('',(1.255,0.705,1.9)); +#61956 = VECTOR('',#61957,1.); +#61957 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61958 = PLANE('',#61959); +#61959 = AXIS2_PLACEMENT_3D('',#61960,#61961,#61962); +#61960 = CARTESIAN_POINT('',(-1.405,0.705,1.9)); +#61961 = DIRECTION('',(2.2E-16,-1.,6.9E-16)); +#61962 = DIRECTION('',(1.,2.2E-16,3.8E-16)); +#61963 = ADVANCED_FACE('',(#61964),#61983,.F.); +#61964 = FACE_BOUND('',#61965,.F.); +#61965 = EDGE_LOOP('',(#61966,#61967,#61968,#61976)); +#61966 = ORIENTED_EDGE('',*,*,#61946,.T.); +#61967 = ORIENTED_EDGE('',*,*,#61216,.T.); +#61968 = ORIENTED_EDGE('',*,*,#61969,.F.); +#61969 = EDGE_CURVE('',#61970,#61209,#61972,.T.); +#61970 = VERTEX_POINT('',#61971); +#61971 = CARTESIAN_POINT('',(-1.405,0.555,1.9)); +#61972 = LINE('',#61973,#61974); +#61973 = CARTESIAN_POINT('',(-1.405,0.555,1.9)); +#61974 = VECTOR('',#61975,1.); +#61975 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61976 = ORIENTED_EDGE('',*,*,#61977,.F.); +#61977 = EDGE_CURVE('',#61937,#61970,#61978,.T.); +#61978 = CIRCLE('',#61979,0.15); +#61979 = AXIS2_PLACEMENT_3D('',#61980,#61981,#61982); +#61980 = CARTESIAN_POINT('',(-1.255,0.555,1.9)); +#61981 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#61982 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#61983 = CYLINDRICAL_SURFACE('',#61984,0.15); +#61984 = AXIS2_PLACEMENT_3D('',#61985,#61986,#61987); +#61985 = CARTESIAN_POINT('',(-1.255,0.555,1.9)); +#61986 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61987 = DIRECTION('',(-2.2E-16,1.,-6.9E-16)); +#61988 = ADVANCED_FACE('',(#61989),#62008,.F.); +#61989 = FACE_BOUND('',#61990,.F.); +#61990 = EDGE_LOOP('',(#61991,#62000,#62006,#62007)); +#61991 = ORIENTED_EDGE('',*,*,#61992,.T.); +#61992 = EDGE_CURVE('',#61939,#61993,#61995,.T.); +#61993 = VERTEX_POINT('',#61994); +#61994 = CARTESIAN_POINT('',(1.405,0.555,1.9)); +#61995 = CIRCLE('',#61996,0.15); +#61996 = AXIS2_PLACEMENT_3D('',#61997,#61998,#61999); +#61997 = CARTESIAN_POINT('',(1.255,0.555,1.9)); +#61998 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#61999 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#62000 = ORIENTED_EDGE('',*,*,#62001,.T.); +#62001 = EDGE_CURVE('',#61993,#61166,#62002,.T.); +#62002 = LINE('',#62003,#62004); +#62003 = CARTESIAN_POINT('',(1.405,0.555,1.9)); +#62004 = VECTOR('',#62005,1.); +#62005 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62006 = ORIENTED_EDGE('',*,*,#61165,.F.); +#62007 = ORIENTED_EDGE('',*,*,#61953,.F.); +#62008 = CYLINDRICAL_SURFACE('',#62009,0.15); +#62009 = AXIS2_PLACEMENT_3D('',#62010,#62011,#62012); +#62010 = CARTESIAN_POINT('',(1.255,0.555,1.9)); +#62011 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62012 = DIRECTION('',(-2.2E-16,1.,-6.9E-16)); +#62013 = ADVANCED_FACE('',(#62014),#62032,.T.); +#62014 = FACE_BOUND('',#62015,.T.); +#62015 = EDGE_LOOP('',(#62016,#62024,#62030,#62031)); +#62016 = ORIENTED_EDGE('',*,*,#62017,.F.); +#62017 = EDGE_CURVE('',#62018,#61970,#62020,.T.); +#62018 = VERTEX_POINT('',#62019); +#62019 = CARTESIAN_POINT('',(-1.405,-0.555,1.9)); +#62020 = LINE('',#62021,#62022); +#62021 = CARTESIAN_POINT('',(-1.405,-0.705,1.9)); +#62022 = VECTOR('',#62023,1.); +#62023 = DIRECTION('',(0.,1.,-1.E-15)); +#62024 = ORIENTED_EDGE('',*,*,#62025,.T.); +#62025 = EDGE_CURVE('',#62018,#61200,#62026,.T.); +#62026 = LINE('',#62027,#62028); +#62027 = CARTESIAN_POINT('',(-1.405,-0.555,1.9)); +#62028 = VECTOR('',#62029,1.); +#62029 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62030 = ORIENTED_EDGE('',*,*,#61208,.T.); +#62031 = ORIENTED_EDGE('',*,*,#61969,.F.); +#62032 = PLANE('',#62033); +#62033 = AXIS2_PLACEMENT_3D('',#62034,#62035,#62036); +#62034 = CARTESIAN_POINT('',(-1.405,-0.705,1.9)); +#62035 = DIRECTION('',(1.,1.1E-16,2.7E-16)); +#62036 = DIRECTION('',(-1.1E-16,1.,-5.8E-16)); +#62037 = ADVANCED_FACE('',(#62038),#62056,.T.); +#62038 = FACE_BOUND('',#62039,.T.); +#62039 = EDGE_LOOP('',(#62040,#62048,#62049,#62050)); +#62040 = ORIENTED_EDGE('',*,*,#62041,.F.); +#62041 = EDGE_CURVE('',#61993,#62042,#62044,.T.); +#62042 = VERTEX_POINT('',#62043); +#62043 = CARTESIAN_POINT('',(1.405,-0.555,1.9)); +#62044 = LINE('',#62045,#62046); +#62045 = CARTESIAN_POINT('',(1.405,0.705,1.9)); +#62046 = VECTOR('',#62047,1.); +#62047 = DIRECTION('',(0.,-1.,1.E-15)); +#62048 = ORIENTED_EDGE('',*,*,#62001,.T.); +#62049 = ORIENTED_EDGE('',*,*,#61174,.T.); +#62050 = ORIENTED_EDGE('',*,*,#62051,.F.); +#62051 = EDGE_CURVE('',#62042,#61175,#62052,.T.); +#62052 = LINE('',#62053,#62054); +#62053 = CARTESIAN_POINT('',(1.405,-0.555,1.9)); +#62054 = VECTOR('',#62055,1.); +#62055 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62056 = PLANE('',#62057); +#62057 = AXIS2_PLACEMENT_3D('',#62058,#62059,#62060); +#62058 = CARTESIAN_POINT('',(1.405,0.705,1.9)); +#62059 = DIRECTION('',(-1.,-1.1E-16,-2.7E-16)); +#62060 = DIRECTION('',(1.1E-16,-1.,5.8E-16)); +#62061 = ADVANCED_FACE('',(#62062),#62081,.F.); +#62062 = FACE_BOUND('',#62063,.F.); +#62063 = EDGE_LOOP('',(#62064,#62065,#62066,#62074)); +#62064 = ORIENTED_EDGE('',*,*,#62025,.T.); +#62065 = ORIENTED_EDGE('',*,*,#61199,.T.); +#62066 = ORIENTED_EDGE('',*,*,#62067,.F.); +#62067 = EDGE_CURVE('',#62068,#61192,#62070,.T.); +#62068 = VERTEX_POINT('',#62069); +#62069 = CARTESIAN_POINT('',(-1.255,-0.705,1.9)); +#62070 = LINE('',#62071,#62072); +#62071 = CARTESIAN_POINT('',(-1.255,-0.705,1.9)); +#62072 = VECTOR('',#62073,1.); +#62073 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62074 = ORIENTED_EDGE('',*,*,#62075,.F.); +#62075 = EDGE_CURVE('',#62018,#62068,#62076,.T.); +#62076 = CIRCLE('',#62077,0.15); +#62077 = AXIS2_PLACEMENT_3D('',#62078,#62079,#62080); +#62078 = CARTESIAN_POINT('',(-1.255,-0.555,1.9)); +#62079 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#62080 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#62081 = CYLINDRICAL_SURFACE('',#62082,0.15); +#62082 = AXIS2_PLACEMENT_3D('',#62083,#62084,#62085); +#62083 = CARTESIAN_POINT('',(-1.255,-0.555,1.9)); +#62084 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62085 = DIRECTION('',(-1.,-1.1E-16,-2.7E-16)); +#62086 = ADVANCED_FACE('',(#62087),#62106,.F.); +#62087 = FACE_BOUND('',#62088,.F.); +#62088 = EDGE_LOOP('',(#62089,#62097,#62098,#62099)); +#62089 = ORIENTED_EDGE('',*,*,#62090,.T.); +#62090 = EDGE_CURVE('',#62091,#61183,#62093,.T.); +#62091 = VERTEX_POINT('',#62092); +#62092 = CARTESIAN_POINT('',(1.255,-0.705,1.9)); +#62093 = LINE('',#62094,#62095); +#62094 = CARTESIAN_POINT('',(1.255,-0.705,1.9)); +#62095 = VECTOR('',#62096,1.); +#62096 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62097 = ORIENTED_EDGE('',*,*,#61182,.T.); +#62098 = ORIENTED_EDGE('',*,*,#62051,.F.); +#62099 = ORIENTED_EDGE('',*,*,#62100,.F.); +#62100 = EDGE_CURVE('',#62091,#62042,#62101,.T.); +#62101 = CIRCLE('',#62102,0.15); +#62102 = AXIS2_PLACEMENT_3D('',#62103,#62104,#62105); +#62103 = CARTESIAN_POINT('',(1.255,-0.555,1.9)); +#62104 = DIRECTION('',(-2.7E-16,6.9E-16,1.)); +#62105 = DIRECTION('',(9.676622370318E-49,1.,-6.9E-16)); +#62106 = CYLINDRICAL_SURFACE('',#62107,0.15); +#62107 = AXIS2_PLACEMENT_3D('',#62108,#62109,#62110); +#62108 = CARTESIAN_POINT('',(1.255,-0.555,1.9)); +#62109 = DIRECTION('',(2.7E-16,-6.9E-16,-1.)); +#62110 = DIRECTION('',(2.2E-16,-1.,6.9E-16)); +#62111 = ADVANCED_FACE('',(#62112),#62123,.T.); +#62112 = FACE_BOUND('',#62113,.T.); +#62113 = EDGE_LOOP('',(#62114,#62120,#62121,#62122)); +#62114 = ORIENTED_EDGE('',*,*,#62115,.F.); +#62115 = EDGE_CURVE('',#62091,#62068,#62116,.T.); +#62116 = LINE('',#62117,#62118); +#62117 = CARTESIAN_POINT('',(1.405,-0.705,1.9)); +#62118 = VECTOR('',#62119,1.); +#62119 = DIRECTION('',(-1.,0.,0.)); +#62120 = ORIENTED_EDGE('',*,*,#62090,.T.); +#62121 = ORIENTED_EDGE('',*,*,#61191,.T.); +#62122 = ORIENTED_EDGE('',*,*,#62067,.F.); +#62123 = PLANE('',#62124); +#62124 = AXIS2_PLACEMENT_3D('',#62125,#62126,#62127); +#62125 = CARTESIAN_POINT('',(1.405,-0.705,1.9)); +#62126 = DIRECTION('',(-2.2E-16,1.,-6.9E-16)); +#62127 = DIRECTION('',(-1.,-2.2E-16,-3.8E-16)); +#62128 = ADVANCED_FACE('',(#62129),#62147,.T.); +#62129 = FACE_BOUND('',#62130,.F.); +#62130 = EDGE_LOOP('',(#62131,#62132,#62133,#62141)); +#62131 = ORIENTED_EDGE('',*,*,#61240,.F.); +#62132 = ORIENTED_EDGE('',*,*,#61774,.T.); +#62133 = ORIENTED_EDGE('',*,*,#62134,.T.); +#62134 = EDGE_CURVE('',#61767,#62135,#62137,.T.); +#62135 = VERTEX_POINT('',#62136); +#62136 = CARTESIAN_POINT('',(-2.925,-0.525,1.32)); +#62137 = LINE('',#62138,#62139); +#62138 = CARTESIAN_POINT('',(-2.925,-0.525,1.2)); +#62139 = VECTOR('',#62140,1.); +#62140 = DIRECTION('',(5.6E-16,-4.4E-16,1.)); +#62141 = ORIENTED_EDGE('',*,*,#62142,.F.); +#62142 = EDGE_CURVE('',#61241,#62135,#62143,.T.); +#62143 = LINE('',#62144,#62145); +#62144 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62145 = VECTOR('',#62146,1.); +#62146 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62147 = PLANE('',#62148); +#62148 = AXIS2_PLACEMENT_3D('',#62149,#62150,#62151); +#62149 = CARTESIAN_POINT('',(-2.675,-0.525,1.2)); +#62150 = DIRECTION('',(0.,-1.,3.3E-16)); +#62151 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#62152 = ADVANCED_FACE('',(#62153),#62163,.T.); +#62153 = FACE_BOUND('',#62154,.F.); +#62154 = EDGE_LOOP('',(#62155,#62156,#62162)); +#62155 = ORIENTED_EDGE('',*,*,#61248,.T.); +#62156 = ORIENTED_EDGE('',*,*,#62157,.F.); +#62157 = EDGE_CURVE('',#61317,#61241,#62158,.T.); +#62158 = LINE('',#62159,#62160); +#62159 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62160 = VECTOR('',#62161,1.); +#62161 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62162 = ORIENTED_EDGE('',*,*,#61316,.T.); +#62163 = PLANE('',#62164); +#62164 = AXIS2_PLACEMENT_3D('',#62165,#62166,#62167); +#62165 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62166 = DIRECTION('',(-1.1E-16,1.1E-16,1.)); +#62167 = DIRECTION('',(-4.4E-16,-1.,1.1E-16)); +#62168 = ADVANCED_FACE('',(#62169),#62180,.T.); +#62169 = FACE_BOUND('',#62170,.T.); +#62170 = EDGE_LOOP('',(#62171,#62172,#62173,#62179)); +#62171 = ORIENTED_EDGE('',*,*,#61348,.T.); +#62172 = ORIENTED_EDGE('',*,*,#61824,.T.); +#62173 = ORIENTED_EDGE('',*,*,#62174,.F.); +#62174 = EDGE_CURVE('',#61907,#61817,#62175,.T.); +#62175 = LINE('',#62176,#62177); +#62176 = CARTESIAN_POINT('',(-2.675,1.85,1.17)); +#62177 = VECTOR('',#62178,1.); +#62178 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#62179 = ORIENTED_EDGE('',*,*,#61914,.F.); +#62180 = CYLINDRICAL_SURFACE('',#62181,0.15); +#62181 = AXIS2_PLACEMENT_3D('',#62182,#62183,#62184); +#62182 = CARTESIAN_POINT('',(-2.675,1.7,1.17)); +#62183 = DIRECTION('',(1.,-4.4E-16,5.E-16)); +#62184 = DIRECTION('',(-5.E-16,4.4E-16,1.)); +#62185 = ADVANCED_FACE('',(#62186),#62223,.T.); +#62186 = FACE_BOUND('',#62187,.T.); +#62187 = EDGE_LOOP('',(#62188,#62196,#62204,#62212,#62219,#62220,#62221, + #62222)); +#62188 = ORIENTED_EDGE('',*,*,#62189,.T.); +#62189 = EDGE_CURVE('',#61446,#62190,#62192,.T.); +#62190 = VERTEX_POINT('',#62191); +#62191 = CARTESIAN_POINT('',(2.925,-0.525,1.32)); +#62192 = LINE('',#62193,#62194); +#62193 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#62194 = VECTOR('',#62195,1.); +#62195 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#62196 = ORIENTED_EDGE('',*,*,#62197,.T.); +#62197 = EDGE_CURVE('',#62190,#62198,#62200,.T.); +#62198 = VERTEX_POINT('',#62199); +#62199 = CARTESIAN_POINT('',(2.925,0.525,1.32)); +#62200 = LINE('',#62201,#62202); +#62201 = CARTESIAN_POINT('',(2.925,-0.525,1.32)); +#62202 = VECTOR('',#62203,1.); +#62203 = DIRECTION('',(1.E-15,1.,1.E-30)); +#62204 = ORIENTED_EDGE('',*,*,#62205,.F.); +#62205 = EDGE_CURVE('',#62206,#62198,#62208,.T.); +#62206 = VERTEX_POINT('',#62207); +#62207 = CARTESIAN_POINT('',(2.825,0.525,1.32)); +#62208 = LINE('',#62209,#62210); +#62209 = CARTESIAN_POINT('',(2.675,0.525,1.32)); +#62210 = VECTOR('',#62211,1.); +#62211 = DIRECTION('',(1.,-1.11E-15,5.6E-16)); +#62212 = ORIENTED_EDGE('',*,*,#62213,.F.); +#62213 = EDGE_CURVE('',#61284,#62206,#62214,.T.); +#62214 = CIRCLE('',#62215,0.15); +#62215 = AXIS2_PLACEMENT_3D('',#62216,#62217,#62218); +#62216 = CARTESIAN_POINT('',(2.825,0.675,1.32)); +#62217 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#62218 = DIRECTION('',(-1.,0.,-7.2E-16)); +#62219 = ORIENTED_EDGE('',*,*,#61291,.F.); +#62220 = ORIENTED_EDGE('',*,*,#61299,.F.); +#62221 = ORIENTED_EDGE('',*,*,#61307,.F.); +#62222 = ORIENTED_EDGE('',*,*,#61445,.T.); +#62223 = PLANE('',#62224); +#62224 = AXIS2_PLACEMENT_3D('',#62225,#62226,#62227); +#62225 = CARTESIAN_POINT('',(2.675,-0.525,1.32)); +#62226 = DIRECTION('',(-5.6E-16,3.3E-16,1.)); +#62227 = DIRECTION('',(6.7E-16,1.,-3.3E-16)); +#62228 = ADVANCED_FACE('',(#62229),#62247,.T.); +#62229 = FACE_BOUND('',#62230,.F.); +#62230 = EDGE_LOOP('',(#62231,#62232,#62240)); +#62231 = ORIENTED_EDGE('',*,*,#61332,.T.); +#62232 = ORIENTED_EDGE('',*,*,#62233,.T.); +#62233 = EDGE_CURVE('',#61325,#62234,#62236,.T.); +#62234 = VERTEX_POINT('',#62235); +#62235 = CARTESIAN_POINT('',(-2.825,0.525,1.32)); +#62236 = LINE('',#62237,#62238); +#62237 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#62238 = VECTOR('',#62239,1.); +#62239 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62240 = ORIENTED_EDGE('',*,*,#62241,.F.); +#62241 = EDGE_CURVE('',#61333,#62234,#62242,.T.); +#62242 = CIRCLE('',#62243,0.15); +#62243 = AXIS2_PLACEMENT_3D('',#62244,#62245,#62246); +#62244 = CARTESIAN_POINT('',(-2.825,0.675,1.32)); +#62245 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#62246 = DIRECTION('',(1.,-1.11E-15,-6.E-17)); +#62247 = PLANE('',#62248); +#62248 = AXIS2_PLACEMENT_3D('',#62249,#62250,#62251); +#62249 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62250 = DIRECTION('',(-1.1E-16,1.1E-16,1.)); +#62251 = DIRECTION('',(-4.4E-16,-1.,1.1E-16)); +#62252 = ADVANCED_FACE('',(#62253),#62273,.T.); +#62253 = FACE_BOUND('',#62254,.F.); +#62254 = EDGE_LOOP('',(#62255,#62256,#62257,#62265,#62271,#62272)); +#62255 = ORIENTED_EDGE('',*,*,#62157,.T.); +#62256 = ORIENTED_EDGE('',*,*,#62142,.T.); +#62257 = ORIENTED_EDGE('',*,*,#62258,.T.); +#62258 = EDGE_CURVE('',#62135,#62259,#62261,.T.); +#62259 = VERTEX_POINT('',#62260); +#62260 = CARTESIAN_POINT('',(-2.925,0.525,1.32)); +#62261 = LINE('',#62262,#62263); +#62262 = CARTESIAN_POINT('',(-2.925,-0.525,1.32)); +#62263 = VECTOR('',#62264,1.); +#62264 = DIRECTION('',(5.6E-16,1.,-4.4E-16)); +#62265 = ORIENTED_EDGE('',*,*,#62266,.F.); +#62266 = EDGE_CURVE('',#62234,#62259,#62267,.T.); +#62267 = LINE('',#62268,#62269); +#62268 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#62269 = VECTOR('',#62270,1.); +#62270 = DIRECTION('',(-1.,-0.,-1.1E-16)); +#62271 = ORIENTED_EDGE('',*,*,#62233,.F.); +#62272 = ORIENTED_EDGE('',*,*,#61324,.F.); +#62273 = PLANE('',#62274); +#62274 = AXIS2_PLACEMENT_3D('',#62275,#62276,#62277); +#62275 = CARTESIAN_POINT('',(-2.675,-0.525,1.32)); +#62276 = DIRECTION('',(-1.1E-16,1.1E-16,1.)); +#62277 = DIRECTION('',(-4.4E-16,-1.,1.1E-16)); +#62278 = ADVANCED_FACE('',(#62279),#62316,.F.); +#62279 = FACE_BOUND('',#62280,.F.); +#62280 = EDGE_LOOP('',(#62281,#62282,#62295,#62305)); +#62281 = ORIENTED_EDGE('',*,*,#61356,.T.); +#62282 = ORIENTED_EDGE('',*,*,#62283,.T.); +#62283 = EDGE_CURVE('',#61359,#62284,#62286,.T.); +#62284 = VERTEX_POINT('',#62285); +#62285 = CARTESIAN_POINT('',(2.134020897087,-0.942322063626, + 1.699874109893)); +#62286 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62287,#62288,#62289,#62290, + #62291,#62292,#62293,#62294),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62287 = CARTESIAN_POINT('',(2.29897305193,-1.107274218468,1.2916032)); +#62288 = CARTESIAN_POINT('',(2.296104788947,-1.104405955486,1.2987024)); +#62289 = CARTESIAN_POINT('',(2.293236525965,-1.101537692504,1.3058016)); +#62290 = CARTESIAN_POINT('',(2.290368262982,-1.098669429521,1.3129008)); +#62291 = CARTESIAN_POINT('',(2.231248485851,-1.039549652389, + 1.459227383156)); +#62292 = CARTESIAN_POINT('',(2.174996971701,-0.98329813824, + 1.598454766312)); +#62293 = CARTESIAN_POINT('',(2.118745457552,-0.92704662409, + 1.737682149468)); +#62294 = CARTESIAN_POINT('',(2.062493943402,-0.870795109941, + 1.876909532624)); +#62295 = ORIENTED_EDGE('',*,*,#62296,.F.); +#62296 = EDGE_CURVE('',#62297,#62284,#62299,.T.); +#62297 = VERTEX_POINT('',#62298); +#62298 = CARTESIAN_POINT('',(2.134020897087,0.942322063626, + 1.699874109893)); +#62299 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62300,#62301,#62302,#62303, + #62304),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#62300 = CARTESIAN_POINT('',(2.134020897087,1.324076519193, + 1.699874109893)); +#62301 = CARTESIAN_POINT('',(2.134020897087,1.28154870814,1.699874109893 + )); +#62302 = CARTESIAN_POINT('',(2.134020897087,8.9E-16,1.699874109893)); +#62303 = CARTESIAN_POINT('',(2.134020897087,-1.28154870814, + 1.699874109893)); +#62304 = CARTESIAN_POINT('',(2.134020897087,-1.324076519193, + 1.699874109893)); +#62305 = ORIENTED_EDGE('',*,*,#62306,.F.); +#62306 = EDGE_CURVE('',#61357,#62297,#62307,.T.); +#62307 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62308,#62309,#62310,#62311, + #62312,#62313,#62314,#62315),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62308 = CARTESIAN_POINT('',(2.29897305193,1.107274218468,1.2916032)); +#62309 = CARTESIAN_POINT('',(2.296104788947,1.104405955486,1.2987024)); +#62310 = CARTESIAN_POINT('',(2.293236525965,1.101537692504,1.3058016)); +#62311 = CARTESIAN_POINT('',(2.290368262982,1.098669429521,1.3129008)); +#62312 = CARTESIAN_POINT('',(2.231248485851,1.039549652389, + 1.459227383156)); +#62313 = CARTESIAN_POINT('',(2.174996971701,0.98329813824,1.598454766312 + )); +#62314 = CARTESIAN_POINT('',(2.118745457552,0.92704662409,1.737682149468 + )); +#62315 = CARTESIAN_POINT('',(2.062493943402,0.870795109941, + 1.876909532624)); +#62316 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62317,#62318) + ,(#62319,#62320 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62317 = CARTESIAN_POINT('',(2.2875,1.3925,1.32)); +#62318 = CARTESIAN_POINT('',(2.053164789016,1.158164789016,1.9)); +#62319 = CARTESIAN_POINT('',(2.2875,-1.3925,1.32)); +#62320 = CARTESIAN_POINT('',(2.053164789016,-1.158164789016,1.9)); +#62321 = ADVANCED_FACE('',(#62322),#62346,.T.); +#62322 = FACE_BOUND('',#62323,.T.); +#62323 = EDGE_LOOP('',(#62324,#62325,#62338,#62345)); +#62324 = ORIENTED_EDGE('',*,*,#61366,.T.); +#62325 = ORIENTED_EDGE('',*,*,#62326,.T.); +#62326 = EDGE_CURVE('',#61367,#62327,#62329,.T.); +#62327 = VERTEX_POINT('',#62328); +#62328 = CARTESIAN_POINT('',(1.837322063626,1.239020897087, + 1.699874109893)); +#62329 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62330,#62331,#62332,#62333, + #62334,#62335,#62336,#62337),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62330 = CARTESIAN_POINT('',(2.002274218468,1.40397305193,1.2916032)); +#62331 = CARTESIAN_POINT('',(1.999405955486,1.401104788947,1.2987024)); +#62332 = CARTESIAN_POINT('',(1.996537692504,1.398236525965,1.3058016)); +#62333 = CARTESIAN_POINT('',(1.993669429521,1.395368262982,1.3129008)); +#62334 = CARTESIAN_POINT('',(1.934549652389,1.336248485851, + 1.459227383156)); +#62335 = CARTESIAN_POINT('',(1.87829813824,1.279996971701,1.598454766312 + )); +#62336 = CARTESIAN_POINT('',(1.82204662409,1.223745457552,1.737682149468 + )); +#62337 = CARTESIAN_POINT('',(1.765795109941,1.167493943402, + 1.876909532624)); +#62338 = ORIENTED_EDGE('',*,*,#62339,.T.); +#62339 = EDGE_CURVE('',#62327,#62297,#62340,.T.); +#62340 = CIRCLE('',#62341,0.32); +#62341 = AXIS2_PLACEMENT_3D('',#62342,#62343,#62344); +#62342 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#62343 = DIRECTION('',(0.350800434887,0.350800434887,-0.868261544562)); +#62344 = DIRECTION('',(6.501229570851E-14,0.927183854567,0.374606593416) + ); +#62345 = ORIENTED_EDGE('',*,*,#62306,.F.); +#62346 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62347,#62348,#62349,#62350,#62351,#62352,#62353,#62354) + ,(#62355,#62356,#62357,#62358,#62359,#62360,#62361,#62362) + ,(#62363,#62364,#62365,#62366,#62367,#62368,#62369,#62370 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62347 = CARTESIAN_POINT('',(2.29897305193,1.107274218468,1.2916032)); +#62348 = CARTESIAN_POINT('',(2.296104788947,1.104405955486,1.2987024)); +#62349 = CARTESIAN_POINT('',(2.293236525965,1.101537692504,1.3058016)); +#62350 = CARTESIAN_POINT('',(2.290368262982,1.098669429521,1.3129008)); +#62351 = CARTESIAN_POINT('',(2.231248485851,1.039549652389, + 1.459227383156)); +#62352 = CARTESIAN_POINT('',(2.174996971701,0.98329813824,1.598454766312 + )); +#62353 = CARTESIAN_POINT('',(2.118745457552,0.92704662409,1.737682149468 + )); +#62354 = CARTESIAN_POINT('',(2.062493943402,0.870795109941, + 1.876909532624)); +#62355 = CARTESIAN_POINT('',(2.262461013069,1.367461013069, + 1.381973667376)); +#62356 = CARTESIAN_POINT('',(2.259592750086,1.364592750086, + 1.389072867376)); +#62357 = CARTESIAN_POINT('',(2.256724487104,1.361724487104, + 1.396172067376)); +#62358 = CARTESIAN_POINT('',(2.253856224122,1.358856224122, + 1.403271267376)); +#62359 = CARTESIAN_POINT('',(2.19473644699,1.29973644699,1.549597850532) + ); +#62360 = CARTESIAN_POINT('',(2.13848493284,1.24348493284,1.688825233688) + ); +#62361 = CARTESIAN_POINT('',(2.082233418691,1.187233418691, + 1.828052616844)); +#62362 = CARTESIAN_POINT('',(2.025981904541,1.130981904541,1.96728)); +#62363 = CARTESIAN_POINT('',(2.002274218468,1.40397305193,1.2916032)); +#62364 = CARTESIAN_POINT('',(1.999405955486,1.401104788947,1.2987024)); +#62365 = CARTESIAN_POINT('',(1.996537692504,1.398236525965,1.3058016)); +#62366 = CARTESIAN_POINT('',(1.993669429521,1.395368262982,1.3129008)); +#62367 = CARTESIAN_POINT('',(1.934549652389,1.336248485851, + 1.459227383156)); +#62368 = CARTESIAN_POINT('',(1.87829813824,1.279996971701,1.598454766312 + )); +#62369 = CARTESIAN_POINT('',(1.82204662409,1.223745457552,1.737682149468 + )); +#62370 = CARTESIAN_POINT('',(1.765795109941,1.167493943402, + 1.876909532624)); +#62371 = ADVANCED_FACE('',(#62372),#62396,.F.); +#62372 = FACE_BOUND('',#62373,.F.); +#62373 = EDGE_LOOP('',(#62374,#62375,#62388,#62395)); +#62374 = ORIENTED_EDGE('',*,*,#61426,.T.); +#62375 = ORIENTED_EDGE('',*,*,#62376,.T.); +#62376 = EDGE_CURVE('',#61419,#62377,#62379,.T.); +#62377 = VERTEX_POINT('',#62378); +#62378 = CARTESIAN_POINT('',(1.837322063626,-1.239020897087, + 1.699874109893)); +#62379 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62380,#62381,#62382,#62383, + #62384,#62385,#62386,#62387),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62380 = CARTESIAN_POINT('',(2.002274218468,-1.40397305193,1.2916032)); +#62381 = CARTESIAN_POINT('',(1.999405955486,-1.401104788947,1.2987024)); +#62382 = CARTESIAN_POINT('',(1.996537692504,-1.398236525965,1.3058016)); +#62383 = CARTESIAN_POINT('',(1.993669429521,-1.395368262982,1.3129008)); +#62384 = CARTESIAN_POINT('',(1.934549652389,-1.336248485851, + 1.459227383156)); +#62385 = CARTESIAN_POINT('',(1.87829813824,-1.279996971701, + 1.598454766312)); +#62386 = CARTESIAN_POINT('',(1.82204662409,-1.223745457552, + 1.737682149468)); +#62387 = CARTESIAN_POINT('',(1.765795109941,-1.167493943402, + 1.876909532624)); +#62388 = ORIENTED_EDGE('',*,*,#62389,.T.); +#62389 = EDGE_CURVE('',#62377,#62284,#62390,.T.); +#62390 = CIRCLE('',#62391,0.32); +#62391 = AXIS2_PLACEMENT_3D('',#62392,#62393,#62394); +#62392 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#62393 = DIRECTION('',(-0.350800434887,0.350800434887,0.868261544562)); +#62394 = DIRECTION('',(6.321042565431E-14,-0.927183854567,0.374606593416 + )); +#62395 = ORIENTED_EDGE('',*,*,#62283,.F.); +#62396 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62397,#62398,#62399,#62400,#62401,#62402,#62403,#62404) + ,(#62405,#62406,#62407,#62408,#62409,#62410,#62411,#62412) + ,(#62413,#62414,#62415,#62416,#62417,#62418,#62419,#62420 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62397 = CARTESIAN_POINT('',(2.29897305193,-1.107274218468,1.2916032)); +#62398 = CARTESIAN_POINT('',(2.296104788947,-1.104405955486,1.2987024)); +#62399 = CARTESIAN_POINT('',(2.293236525965,-1.101537692504,1.3058016)); +#62400 = CARTESIAN_POINT('',(2.290368262982,-1.098669429521,1.3129008)); +#62401 = CARTESIAN_POINT('',(2.231248485851,-1.039549652389, + 1.459227383156)); +#62402 = CARTESIAN_POINT('',(2.174996971701,-0.98329813824, + 1.598454766312)); +#62403 = CARTESIAN_POINT('',(2.118745457552,-0.92704662409, + 1.737682149468)); +#62404 = CARTESIAN_POINT('',(2.062493943402,-0.870795109941, + 1.876909532624)); +#62405 = CARTESIAN_POINT('',(2.262461013069,-1.367461013069, + 1.381973667376)); +#62406 = CARTESIAN_POINT('',(2.259592750086,-1.364592750086, + 1.389072867376)); +#62407 = CARTESIAN_POINT('',(2.256724487104,-1.361724487104, + 1.396172067376)); +#62408 = CARTESIAN_POINT('',(2.253856224122,-1.358856224122, + 1.403271267376)); +#62409 = CARTESIAN_POINT('',(2.19473644699,-1.29973644699,1.549597850532 + )); +#62410 = CARTESIAN_POINT('',(2.13848493284,-1.24348493284,1.688825233688 + )); +#62411 = CARTESIAN_POINT('',(2.082233418691,-1.187233418691, + 1.828052616844)); +#62412 = CARTESIAN_POINT('',(2.025981904541,-1.130981904541,1.96728)); +#62413 = CARTESIAN_POINT('',(2.002274218468,-1.40397305193,1.2916032)); +#62414 = CARTESIAN_POINT('',(1.999405955486,-1.401104788947,1.2987024)); +#62415 = CARTESIAN_POINT('',(1.996537692504,-1.398236525965,1.3058016)); +#62416 = CARTESIAN_POINT('',(1.993669429521,-1.395368262982,1.3129008)); +#62417 = CARTESIAN_POINT('',(1.934549652389,-1.336248485851, + 1.459227383156)); +#62418 = CARTESIAN_POINT('',(1.87829813824,-1.279996971701, + 1.598454766312)); +#62419 = CARTESIAN_POINT('',(1.82204662409,-1.223745457552, + 1.737682149468)); +#62420 = CARTESIAN_POINT('',(1.765795109941,-1.167493943402, + 1.876909532624)); +#62421 = ADVANCED_FACE('',(#62422),#62447,.F.); +#62422 = FACE_BOUND('',#62423,.F.); +#62423 = EDGE_LOOP('',(#62424,#62425,#62426,#62436)); +#62424 = ORIENTED_EDGE('',*,*,#61378,.T.); +#62425 = ORIENTED_EDGE('',*,*,#62326,.T.); +#62426 = ORIENTED_EDGE('',*,*,#62427,.F.); +#62427 = EDGE_CURVE('',#62428,#62327,#62430,.T.); +#62428 = VERTEX_POINT('',#62429); +#62429 = CARTESIAN_POINT('',(-1.837322063626,1.239020897087, + 1.699874109893)); +#62430 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62431,#62432,#62433,#62434, + #62435),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#62431 = CARTESIAN_POINT('',(-2.284805319193,1.239020897087, + 1.699874109893)); +#62432 = CARTESIAN_POINT('',(-2.20941310814,1.239020897087, + 1.699874109893)); +#62433 = CARTESIAN_POINT('',(0.,1.239020897087,1.699874109893)); +#62434 = CARTESIAN_POINT('',(2.20941310814,1.239020897087,1.699874109893 + )); +#62435 = CARTESIAN_POINT('',(2.284805319193,1.239020897087, + 1.699874109893)); +#62436 = ORIENTED_EDGE('',*,*,#62437,.F.); +#62437 = EDGE_CURVE('',#61379,#62428,#62438,.T.); +#62438 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62439,#62440,#62441,#62442, + #62443,#62444,#62445,#62446),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62439 = CARTESIAN_POINT('',(-2.002274218468,1.40397305193,1.2916032)); +#62440 = CARTESIAN_POINT('',(-1.999405955486,1.401104788947,1.2987024)); +#62441 = CARTESIAN_POINT('',(-1.996537692504,1.398236525965,1.3058016)); +#62442 = CARTESIAN_POINT('',(-1.993669429521,1.395368262982,1.3129008)); +#62443 = CARTESIAN_POINT('',(-1.934549652389,1.336248485851, + 1.459227383156)); +#62444 = CARTESIAN_POINT('',(-1.87829813824,1.279996971701, + 1.598454766312)); +#62445 = CARTESIAN_POINT('',(-1.82204662409,1.223745457552, + 1.737682149468)); +#62446 = CARTESIAN_POINT('',(-1.765795109941,1.167493943402, + 1.876909532624)); +#62447 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62448,#62449) + ,(#62450,#62451 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.575),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62448 = CARTESIAN_POINT('',(-2.2875,1.3925,1.32)); +#62449 = CARTESIAN_POINT('',(-2.053164789016,1.158164789016,1.9)); +#62450 = CARTESIAN_POINT('',(2.2875,1.3925,1.32)); +#62451 = CARTESIAN_POINT('',(2.053164789016,1.158164789016,1.9)); +#62452 = ADVANCED_FACE('',(#62453),#62478,.F.); +#62453 = FACE_BOUND('',#62454,.F.); +#62454 = EDGE_LOOP('',(#62455,#62456,#62469,#62477)); +#62455 = ORIENTED_EDGE('',*,*,#61418,.T.); +#62456 = ORIENTED_EDGE('',*,*,#62457,.T.); +#62457 = EDGE_CURVE('',#61407,#62458,#62460,.T.); +#62458 = VERTEX_POINT('',#62459); +#62459 = CARTESIAN_POINT('',(-1.837322063626,-1.239020897087, + 1.699874109893)); +#62460 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62461,#62462,#62463,#62464, + #62465,#62466,#62467,#62468),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62461 = CARTESIAN_POINT('',(-2.002274218468,-1.40397305193,1.2916032)); +#62462 = CARTESIAN_POINT('',(-1.999405955486,-1.401104788947,1.2987024) + ); +#62463 = CARTESIAN_POINT('',(-1.996537692504,-1.398236525965,1.3058016) + ); +#62464 = CARTESIAN_POINT('',(-1.993669429521,-1.395368262982,1.3129008) + ); +#62465 = CARTESIAN_POINT('',(-1.934549652389,-1.336248485851, + 1.459227383156)); +#62466 = CARTESIAN_POINT('',(-1.87829813824,-1.279996971701, + 1.598454766312)); +#62467 = CARTESIAN_POINT('',(-1.82204662409,-1.223745457552, + 1.737682149468)); +#62468 = CARTESIAN_POINT('',(-1.765795109941,-1.167493943402, + 1.876909532624)); +#62469 = ORIENTED_EDGE('',*,*,#62470,.F.); +#62470 = EDGE_CURVE('',#62377,#62458,#62471,.T.); +#62471 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62472,#62473,#62474,#62475, + #62476),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#62472 = CARTESIAN_POINT('',(2.284805319193,-1.239020897087, + 1.699874109893)); +#62473 = CARTESIAN_POINT('',(2.20941310814,-1.239020897087, + 1.699874109893)); +#62474 = CARTESIAN_POINT('',(-1.33E-15,-1.239020897087,1.699874109893)); +#62475 = CARTESIAN_POINT('',(-2.20941310814,-1.239020897087, + 1.699874109893)); +#62476 = CARTESIAN_POINT('',(-2.284805319193,-1.239020897087, + 1.699874109893)); +#62477 = ORIENTED_EDGE('',*,*,#62376,.F.); +#62478 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62479,#62480) + ,(#62481,#62482 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.575),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62479 = CARTESIAN_POINT('',(2.2875,-1.3925,1.32)); +#62480 = CARTESIAN_POINT('',(2.053164789016,-1.158164789016,1.9)); +#62481 = CARTESIAN_POINT('',(-2.2875,-1.3925,1.32)); +#62482 = CARTESIAN_POINT('',(-2.053164789016,-1.158164789016,1.9)); +#62483 = ADVANCED_FACE('',(#62484),#62508,.F.); +#62484 = FACE_BOUND('',#62485,.F.); +#62485 = EDGE_LOOP('',(#62486,#62487,#62488,#62497)); +#62486 = ORIENTED_EDGE('',*,*,#61386,.T.); +#62487 = ORIENTED_EDGE('',*,*,#62437,.T.); +#62488 = ORIENTED_EDGE('',*,*,#62489,.F.); +#62489 = EDGE_CURVE('',#62490,#62428,#62492,.T.); +#62490 = VERTEX_POINT('',#62491); +#62491 = CARTESIAN_POINT('',(-2.134020897087,0.942322063626, + 1.699874109893)); +#62492 = CIRCLE('',#62493,0.32); +#62493 = AXIS2_PLACEMENT_3D('',#62494,#62495,#62496); +#62494 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#62495 = DIRECTION('',(-0.350800434886,0.350800434886,-0.868261544563)); +#62496 = DIRECTION('',(-0.927183854567,5.243626610226E-13,0.374606593415 + )); +#62497 = ORIENTED_EDGE('',*,*,#62498,.F.); +#62498 = EDGE_CURVE('',#61387,#62490,#62499,.T.); +#62499 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62500,#62501,#62502,#62503, + #62504,#62505,#62506,#62507),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62500 = CARTESIAN_POINT('',(-2.29897305193,1.107274218468,1.2916032)); +#62501 = CARTESIAN_POINT('',(-2.296104788947,1.104405955486,1.2987024)); +#62502 = CARTESIAN_POINT('',(-2.293236525965,1.101537692504,1.3058016)); +#62503 = CARTESIAN_POINT('',(-2.290368262982,1.098669429521,1.3129008)); +#62504 = CARTESIAN_POINT('',(-2.231248485851,1.039549652389, + 1.459227383156)); +#62505 = CARTESIAN_POINT('',(-2.174996971701,0.98329813824, + 1.598454766312)); +#62506 = CARTESIAN_POINT('',(-2.118745457552,0.92704662409, + 1.737682149468)); +#62507 = CARTESIAN_POINT('',(-2.062493943402,0.870795109941, + 1.876909532624)); +#62508 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62509,#62510,#62511,#62512,#62513,#62514,#62515,#62516) + ,(#62517,#62518,#62519,#62520,#62521,#62522,#62523,#62524) + ,(#62525,#62526,#62527,#62528,#62529,#62530,#62531,#62532 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62509 = CARTESIAN_POINT('',(-2.29897305193,1.107274218468,1.2916032)); +#62510 = CARTESIAN_POINT('',(-2.296104788947,1.104405955486,1.2987024)); +#62511 = CARTESIAN_POINT('',(-2.293236525965,1.101537692504,1.3058016)); +#62512 = CARTESIAN_POINT('',(-2.290368262982,1.098669429521,1.3129008)); +#62513 = CARTESIAN_POINT('',(-2.231248485851,1.039549652389, + 1.459227383156)); +#62514 = CARTESIAN_POINT('',(-2.174996971701,0.98329813824, + 1.598454766312)); +#62515 = CARTESIAN_POINT('',(-2.118745457552,0.92704662409, + 1.737682149468)); +#62516 = CARTESIAN_POINT('',(-2.062493943402,0.870795109941, + 1.876909532624)); +#62517 = CARTESIAN_POINT('',(-2.262461013069,1.367461013069, + 1.381973667376)); +#62518 = CARTESIAN_POINT('',(-2.259592750086,1.364592750086, + 1.389072867376)); +#62519 = CARTESIAN_POINT('',(-2.256724487104,1.361724487104, + 1.396172067376)); +#62520 = CARTESIAN_POINT('',(-2.253856224122,1.358856224122, + 1.403271267376)); +#62521 = CARTESIAN_POINT('',(-2.19473644699,1.29973644699,1.549597850532 + )); +#62522 = CARTESIAN_POINT('',(-2.13848493284,1.24348493284,1.688825233688 + )); +#62523 = CARTESIAN_POINT('',(-2.082233418691,1.187233418691, + 1.828052616844)); +#62524 = CARTESIAN_POINT('',(-2.025981904541,1.130981904541,1.96728)); +#62525 = CARTESIAN_POINT('',(-2.002274218468,1.40397305193,1.2916032)); +#62526 = CARTESIAN_POINT('',(-1.999405955486,1.401104788947,1.2987024)); +#62527 = CARTESIAN_POINT('',(-1.996537692504,1.398236525965,1.3058016)); +#62528 = CARTESIAN_POINT('',(-1.993669429521,1.395368262982,1.3129008)); +#62529 = CARTESIAN_POINT('',(-1.934549652389,1.336248485851, + 1.459227383156)); +#62530 = CARTESIAN_POINT('',(-1.87829813824,1.279996971701, + 1.598454766312)); +#62531 = CARTESIAN_POINT('',(-1.82204662409,1.223745457552, + 1.737682149468)); +#62532 = CARTESIAN_POINT('',(-1.765795109941,1.167493943402, + 1.876909532624)); +#62533 = ADVANCED_FACE('',(#62534),#62558,.F.); +#62534 = FACE_BOUND('',#62535,.F.); +#62535 = EDGE_LOOP('',(#62536,#62537,#62550,#62557)); +#62536 = ORIENTED_EDGE('',*,*,#61406,.T.); +#62537 = ORIENTED_EDGE('',*,*,#62538,.T.); +#62538 = EDGE_CURVE('',#61399,#62539,#62541,.T.); +#62539 = VERTEX_POINT('',#62540); +#62540 = CARTESIAN_POINT('',(-2.134020897087,-0.942322063626, + 1.699874109893)); +#62541 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#62542,#62543,#62544,#62545, + #62546,#62547,#62548,#62549),.UNSPECIFIED.,.F.,.F.,(5,3,5),( + 7.137672716727E-02,0.104082079809,0.7454896558),.UNSPECIFIED.); +#62542 = CARTESIAN_POINT('',(-2.29897305193,-1.107274218468,1.2916032)); +#62543 = CARTESIAN_POINT('',(-2.296104788947,-1.104405955486,1.2987024) + ); +#62544 = CARTESIAN_POINT('',(-2.293236525965,-1.101537692504,1.3058016) + ); +#62545 = CARTESIAN_POINT('',(-2.290368262982,-1.098669429521,1.3129008) + ); +#62546 = CARTESIAN_POINT('',(-2.231248485851,-1.039549652389, + 1.459227383156)); +#62547 = CARTESIAN_POINT('',(-2.174996971701,-0.98329813824, + 1.598454766312)); +#62548 = CARTESIAN_POINT('',(-2.118745457552,-0.92704662409, + 1.737682149468)); +#62549 = CARTESIAN_POINT('',(-2.062493943402,-0.870795109941, + 1.876909532624)); +#62550 = ORIENTED_EDGE('',*,*,#62551,.F.); +#62551 = EDGE_CURVE('',#62458,#62539,#62552,.T.); +#62552 = CIRCLE('',#62553,0.32); +#62553 = AXIS2_PLACEMENT_3D('',#62554,#62555,#62556); +#62554 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#62555 = DIRECTION('',(-0.350800434887,-0.350800434887,-0.868261544562) + ); +#62556 = DIRECTION('',(-6.379620159899E-14,-0.927183854567, + 0.374606593416)); +#62557 = ORIENTED_EDGE('',*,*,#62457,.F.); +#62558 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,4,( + (#62559,#62560,#62561,#62562,#62563,#62564,#62565,#62566) + ,(#62567,#62568,#62569,#62570,#62571,#62572,#62573,#62574) + ,(#62575,#62576,#62577,#62578,#62579,#62580,#62581,#62582 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(5,3,5), + (0.,0.641407575991),(7.137672716727E-02,0.104082079809,0.7454896558), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.,1.,1.,1.,1.,1.,1.,1.) + ,(0.755092742592,0.755092742592,0.755092742592,0.755092742592 + ,0.755092742592,0.755092742592,0.755092742592,0.755092742592) +,(1.,1.,1.,1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#62559 = CARTESIAN_POINT('',(-2.002274218468,-1.40397305193,1.2916032)); +#62560 = CARTESIAN_POINT('',(-1.999405955486,-1.401104788947,1.2987024) + ); +#62561 = CARTESIAN_POINT('',(-1.996537692504,-1.398236525965,1.3058016) + ); +#62562 = CARTESIAN_POINT('',(-1.993669429521,-1.395368262982,1.3129008) + ); +#62563 = CARTESIAN_POINT('',(-1.934549652389,-1.336248485851, + 1.459227383156)); +#62564 = CARTESIAN_POINT('',(-1.87829813824,-1.279996971701, + 1.598454766312)); +#62565 = CARTESIAN_POINT('',(-1.82204662409,-1.223745457552, + 1.737682149468)); +#62566 = CARTESIAN_POINT('',(-1.765795109941,-1.167493943402, + 1.876909532624)); +#62567 = CARTESIAN_POINT('',(-2.262461013069,-1.367461013069, + 1.381973667376)); +#62568 = CARTESIAN_POINT('',(-2.259592750086,-1.364592750086, + 1.389072867376)); +#62569 = CARTESIAN_POINT('',(-2.256724487104,-1.361724487104, + 1.396172067376)); +#62570 = CARTESIAN_POINT('',(-2.253856224122,-1.358856224122, + 1.403271267376)); +#62571 = CARTESIAN_POINT('',(-2.19473644699,-1.29973644699, + 1.549597850532)); +#62572 = CARTESIAN_POINT('',(-2.13848493284,-1.24348493284, + 1.688825233688)); +#62573 = CARTESIAN_POINT('',(-2.082233418691,-1.187233418691, + 1.828052616844)); +#62574 = CARTESIAN_POINT('',(-2.025981904541,-1.130981904541,1.96728)); +#62575 = CARTESIAN_POINT('',(-2.29897305193,-1.107274218468,1.2916032)); +#62576 = CARTESIAN_POINT('',(-2.296104788947,-1.104405955486,1.2987024) + ); +#62577 = CARTESIAN_POINT('',(-2.293236525965,-1.101537692504,1.3058016) + ); +#62578 = CARTESIAN_POINT('',(-2.290368262982,-1.098669429521,1.3129008) + ); +#62579 = CARTESIAN_POINT('',(-2.231248485851,-1.039549652389, + 1.459227383156)); +#62580 = CARTESIAN_POINT('',(-2.174996971701,-0.98329813824, + 1.598454766312)); +#62581 = CARTESIAN_POINT('',(-2.118745457552,-0.92704662409, + 1.737682149468)); +#62582 = CARTESIAN_POINT('',(-2.062493943402,-0.870795109941, + 1.876909532624)); +#62583 = ADVANCED_FACE('',(#62584),#62597,.F.); +#62584 = FACE_BOUND('',#62585,.F.); +#62585 = EDGE_LOOP('',(#62586,#62587,#62588,#62596)); +#62586 = ORIENTED_EDGE('',*,*,#61398,.T.); +#62587 = ORIENTED_EDGE('',*,*,#62498,.T.); +#62588 = ORIENTED_EDGE('',*,*,#62589,.F.); +#62589 = EDGE_CURVE('',#62539,#62490,#62590,.T.); +#62590 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#62591,#62592,#62593,#62594, + #62595),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#62591 = CARTESIAN_POINT('',(-2.134020897087,-1.324076519193, + 1.699874109893)); +#62592 = CARTESIAN_POINT('',(-2.134020897087,-1.28154870814, + 1.699874109893)); +#62593 = CARTESIAN_POINT('',(-2.134020897087,1.11E-15,1.699874109893)); +#62594 = CARTESIAN_POINT('',(-2.134020897087,1.28154870814, + 1.699874109893)); +#62595 = CARTESIAN_POINT('',(-2.134020897087,1.324076519193, + 1.699874109893)); +#62596 = ORIENTED_EDGE('',*,*,#62538,.F.); +#62597 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#62598,#62599) + ,(#62600,#62601 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#62598 = CARTESIAN_POINT('',(-2.2875,-1.3925,1.32)); +#62599 = CARTESIAN_POINT('',(-2.053164789016,-1.158164789016,1.9)); +#62600 = CARTESIAN_POINT('',(-2.2875,1.3925,1.32)); +#62601 = CARTESIAN_POINT('',(-2.053164789016,1.158164789016,1.9)); +#62602 = ADVANCED_FACE('',(#62603),#62614,.T.); +#62603 = FACE_BOUND('',#62604,.T.); +#62604 = EDGE_LOOP('',(#62605,#62606,#62612,#62613)); +#62605 = ORIENTED_EDGE('',*,*,#61709,.T.); +#62606 = ORIENTED_EDGE('',*,*,#62607,.T.); +#62607 = EDGE_CURVE('',#61702,#62190,#62608,.T.); +#62608 = LINE('',#62609,#62610); +#62609 = CARTESIAN_POINT('',(2.925,-0.525,1.2)); +#62610 = VECTOR('',#62611,1.); +#62611 = DIRECTION('',(0.,0.,1.)); +#62612 = ORIENTED_EDGE('',*,*,#62189,.F.); +#62613 = ORIENTED_EDGE('',*,*,#61454,.F.); +#62614 = PLANE('',#62615); +#62615 = AXIS2_PLACEMENT_3D('',#62616,#62617,#62618); +#62616 = CARTESIAN_POINT('',(2.675,-0.525,1.2)); +#62617 = DIRECTION('',(-1.11E-15,-1.,1.1E-16)); +#62618 = DIRECTION('',(-7.2E-16,1.1E-16,1.)); +#62619 = ADVANCED_FACE('',(#62620),#62639,.F.); +#62620 = FACE_BOUND('',#62621,.T.); +#62621 = EDGE_LOOP('',(#62622,#62623,#62624,#62633)); +#62622 = ORIENTED_EDGE('',*,*,#61535,.T.); +#62623 = ORIENTED_EDGE('',*,*,#61478,.T.); +#62624 = ORIENTED_EDGE('',*,*,#62625,.F.); +#62625 = EDGE_CURVE('',#62626,#61479,#62628,.T.); +#62626 = VERTEX_POINT('',#62627); +#62627 = CARTESIAN_POINT('',(2.895,-1.68,0.66)); +#62628 = CIRCLE('',#62629,0.17); +#62629 = AXIS2_PLACEMENT_3D('',#62630,#62631,#62632); +#62630 = CARTESIAN_POINT('',(2.725,-1.68,0.66)); +#62631 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#62632 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#62633 = ORIENTED_EDGE('',*,*,#62634,.F.); +#62634 = EDGE_CURVE('',#61528,#62626,#62635,.T.); +#62635 = LINE('',#62636,#62637); +#62636 = CARTESIAN_POINT('',(2.775,-1.68,0.66)); +#62637 = VECTOR('',#62638,1.); +#62638 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#62639 = PLANE('',#62640); +#62640 = AXIS2_PLACEMENT_3D('',#62641,#62642,#62643); +#62641 = CARTESIAN_POINT('',(2.802781745931,-1.757781745931,0.66)); +#62642 = DIRECTION('',(2.6E-16,1.7E-16,-1.)); +#62643 = DIRECTION('',(0.707106781187,0.707106781187,3.040559159102E-16) + ); +#62644 = ADVANCED_FACE('',(#62645),#62664,.F.); +#62645 = FACE_BOUND('',#62646,.T.); +#62646 = EDGE_LOOP('',(#62647,#62656,#62657,#62658)); +#62647 = ORIENTED_EDGE('',*,*,#62648,.T.); +#62648 = EDGE_CURVE('',#62649,#61502,#62651,.T.); +#62649 = VERTEX_POINT('',#62650); +#62650 = CARTESIAN_POINT('',(2.895,-1.68,0.1)); +#62651 = CIRCLE('',#62652,0.17); +#62652 = AXIS2_PLACEMENT_3D('',#62653,#62654,#62655); +#62653 = CARTESIAN_POINT('',(2.725,-1.68,0.1)); +#62654 = DIRECTION('',(-1.8E-16,1.7E-16,-1.)); +#62655 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#62656 = ORIENTED_EDGE('',*,*,#61509,.T.); +#62657 = ORIENTED_EDGE('',*,*,#61543,.F.); +#62658 = ORIENTED_EDGE('',*,*,#62659,.F.); +#62659 = EDGE_CURVE('',#62649,#61526,#62660,.T.); +#62660 = LINE('',#62661,#62662); +#62661 = CARTESIAN_POINT('',(2.895,-1.68,0.1)); +#62662 = VECTOR('',#62663,1.); +#62663 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#62664 = PLANE('',#62665); +#62665 = AXIS2_PLACEMENT_3D('',#62666,#62667,#62668); +#62666 = CARTESIAN_POINT('',(2.802781745931,-1.757781745931,0.1)); +#62667 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#62668 = DIRECTION('',(0.707106781187,0.707106781187,3.040559159102E-16) + ); +#62669 = ADVANCED_FACE('',(#62670),#62713,.T.); +#62670 = FACE_BOUND('',#62671,.F.); +#62671 = EDGE_LOOP('',(#62672,#62680,#62689,#62697,#62706,#62712)); +#62672 = ORIENTED_EDGE('',*,*,#62673,.F.); +#62673 = EDGE_CURVE('',#62674,#61526,#62676,.T.); +#62674 = VERTEX_POINT('',#62675); +#62675 = CARTESIAN_POINT('',(2.775,-1.01,0.1)); +#62676 = LINE('',#62677,#62678); +#62677 = CARTESIAN_POINT('',(2.775,-0.87,0.1)); +#62678 = VECTOR('',#62679,1.); +#62679 = DIRECTION('',(8.3E-16,-1.,-1.1E-16)); +#62680 = ORIENTED_EDGE('',*,*,#62681,.T.); +#62681 = EDGE_CURVE('',#62674,#62682,#62684,.T.); +#62682 = VERTEX_POINT('',#62683); +#62683 = CARTESIAN_POINT('',(2.775,-0.87,0.24)); +#62684 = CIRCLE('',#62685,0.14); +#62685 = AXIS2_PLACEMENT_3D('',#62686,#62687,#62688); +#62686 = CARTESIAN_POINT('',(2.775,-1.01,0.24)); +#62687 = DIRECTION('',(1.,8.3E-16,4.7E-16)); +#62688 = DIRECTION('',(8.3E-16,-1.,6.7E-16)); +#62689 = ORIENTED_EDGE('',*,*,#62690,.T.); +#62690 = EDGE_CURVE('',#62682,#62691,#62693,.T.); +#62691 = VERTEX_POINT('',#62692); +#62692 = CARTESIAN_POINT('',(2.775,-0.87,0.52)); +#62693 = LINE('',#62694,#62695); +#62694 = CARTESIAN_POINT('',(2.775,-0.87,0.1)); +#62695 = VECTOR('',#62696,1.); +#62696 = DIRECTION('',(-1.39E-15,-3.9E-16,1.)); +#62697 = ORIENTED_EDGE('',*,*,#62698,.F.); +#62698 = EDGE_CURVE('',#62699,#62691,#62701,.T.); +#62699 = VERTEX_POINT('',#62700); +#62700 = CARTESIAN_POINT('',(2.775,-1.01,0.66)); +#62701 = CIRCLE('',#62702,0.14); +#62702 = AXIS2_PLACEMENT_3D('',#62703,#62704,#62705); +#62703 = CARTESIAN_POINT('',(2.775,-1.01,0.52)); +#62704 = DIRECTION('',(-1.,-8.3E-16,-1.17E-15)); +#62705 = DIRECTION('',(-8.3E-16,1.,-6.7E-16)); +#62706 = ORIENTED_EDGE('',*,*,#62707,.T.); +#62707 = EDGE_CURVE('',#62699,#61528,#62708,.T.); +#62708 = LINE('',#62709,#62710); +#62709 = CARTESIAN_POINT('',(2.775,-0.87,0.66)); +#62710 = VECTOR('',#62711,1.); +#62711 = DIRECTION('',(8.3E-16,-1.,-1.1E-16)); +#62712 = ORIENTED_EDGE('',*,*,#61525,.F.); +#62713 = PLANE('',#62714); +#62714 = AXIS2_PLACEMENT_3D('',#62715,#62716,#62717); +#62715 = CARTESIAN_POINT('',(2.775,-0.87,0.1)); +#62716 = DIRECTION('',(-1.,8.9E-16,-9.4E-16)); +#62717 = DIRECTION('',(9.4E-16,3.9E-16,-1.)); +#62718 = ADVANCED_FACE('',(#62719),#62730,.T.); +#62719 = FACE_BOUND('',#62720,.T.); +#62720 = EDGE_LOOP('',(#62721,#62722,#62728,#62729)); +#62721 = ORIENTED_EDGE('',*,*,#61668,.F.); +#62722 = ORIENTED_EDGE('',*,*,#62723,.T.); +#62723 = EDGE_CURVE('',#61669,#61576,#62724,.T.); +#62724 = LINE('',#62725,#62726); +#62725 = CARTESIAN_POINT('',(-2.895,-1.68,0.66)); +#62726 = VECTOR('',#62727,1.); +#62727 = DIRECTION('',(-1.7E-16,5.E-17,-1.)); +#62728 = ORIENTED_EDGE('',*,*,#61575,.T.); +#62729 = ORIENTED_EDGE('',*,*,#61559,.T.); +#62730 = CYLINDRICAL_SURFACE('',#62731,0.17); +#62731 = AXIS2_PLACEMENT_3D('',#62732,#62733,#62734); +#62732 = CARTESIAN_POINT('',(-2.725,-1.68,0.66)); +#62733 = DIRECTION('',(-9.6E-16,1.7E-16,1.)); +#62734 = DIRECTION('',(-8.340716854687E-46,-1.,1.7E-16)); +#62735 = ADVANCED_FACE('',(#62736),#62754,.T.); +#62736 = FACE_BOUND('',#62737,.T.); +#62737 = EDGE_LOOP('',(#62738,#62746,#62752,#62753)); +#62738 = ORIENTED_EDGE('',*,*,#62739,.F.); +#62739 = EDGE_CURVE('',#62740,#61576,#62742,.T.); +#62740 = VERTEX_POINT('',#62741); +#62741 = CARTESIAN_POINT('',(-2.895,-1.01,0.1)); +#62742 = LINE('',#62743,#62744); +#62743 = CARTESIAN_POINT('',(-2.895,-0.87,0.1)); +#62744 = VECTOR('',#62745,1.); +#62745 = DIRECTION('',(-4.4E-16,-1.,-5.E-17)); +#62746 = ORIENTED_EDGE('',*,*,#62747,.T.); +#62747 = EDGE_CURVE('',#62740,#61618,#62748,.T.); +#62748 = LINE('',#62749,#62750); +#62749 = CARTESIAN_POINT('',(-2.895,-1.01,0.1)); +#62750 = VECTOR('',#62751,1.); +#62751 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62752 = ORIENTED_EDGE('',*,*,#61617,.T.); +#62753 = ORIENTED_EDGE('',*,*,#61586,.F.); +#62754 = PLANE('',#62755); +#62755 = AXIS2_PLACEMENT_3D('',#62756,#62757,#62758); +#62756 = CARTESIAN_POINT('',(-2.895,-0.87,0.1)); +#62757 = DIRECTION('',(7.5E-16,-2.2E-16,-1.)); +#62758 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62759 = ADVANCED_FACE('',(#62760),#62771,.T.); +#62760 = FACE_BOUND('',#62761,.T.); +#62761 = EDGE_LOOP('',(#62762,#62763,#62764,#62770)); +#62762 = ORIENTED_EDGE('',*,*,#61601,.F.); +#62763 = ORIENTED_EDGE('',*,*,#62648,.F.); +#62764 = ORIENTED_EDGE('',*,*,#62765,.F.); +#62765 = EDGE_CURVE('',#62626,#62649,#62766,.T.); +#62766 = LINE('',#62767,#62768); +#62767 = CARTESIAN_POINT('',(2.895,-1.68,0.66)); +#62768 = VECTOR('',#62769,1.); +#62769 = DIRECTION('',(1.39E-15,3.9E-16,-1.)); +#62770 = ORIENTED_EDGE('',*,*,#62625,.T.); +#62771 = CYLINDRICAL_SURFACE('',#62772,0.17); +#62772 = AXIS2_PLACEMENT_3D('',#62773,#62774,#62775); +#62773 = CARTESIAN_POINT('',(2.725,-1.68,0.66)); +#62774 = DIRECTION('',(-2.6E-16,-1.7E-16,1.)); +#62775 = DIRECTION('',(-1.33E-15,-1.,-1.7E-16)); +#62776 = ADVANCED_FACE('',(#62777),#62795,.T.); +#62777 = FACE_BOUND('',#62778,.T.); +#62778 = EDGE_LOOP('',(#62779,#62780,#62788,#62794)); +#62779 = ORIENTED_EDGE('',*,*,#61651,.F.); +#62780 = ORIENTED_EDGE('',*,*,#62781,.T.); +#62781 = EDGE_CURVE('',#61643,#62782,#62784,.T.); +#62782 = VERTEX_POINT('',#62783); +#62783 = CARTESIAN_POINT('',(-2.895,-1.01,0.66)); +#62784 = LINE('',#62785,#62786); +#62785 = CARTESIAN_POINT('',(-2.775,-1.01,0.66)); +#62786 = VECTOR('',#62787,1.); +#62787 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62788 = ORIENTED_EDGE('',*,*,#62789,.T.); +#62789 = EDGE_CURVE('',#62782,#61669,#62790,.T.); +#62790 = LINE('',#62791,#62792); +#62791 = CARTESIAN_POINT('',(-2.895,-0.87,0.66)); +#62792 = VECTOR('',#62793,1.); +#62793 = DIRECTION('',(-2.16E-15,-1.,2.2E-16)); +#62794 = ORIENTED_EDGE('',*,*,#61677,.F.); +#62795 = PLANE('',#62796); +#62796 = AXIS2_PLACEMENT_3D('',#62797,#62798,#62799); +#62797 = CARTESIAN_POINT('',(-2.775,-0.87,0.66)); +#62798 = DIRECTION('',(-6.E-17,2.2E-16,1.)); +#62799 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62800 = ADVANCED_FACE('',(#62801),#62820,.T.); +#62801 = FACE_BOUND('',#62802,.T.); +#62802 = EDGE_LOOP('',(#62803,#62804,#62812,#62819)); +#62803 = ORIENTED_EDGE('',*,*,#61642,.T.); +#62804 = ORIENTED_EDGE('',*,*,#62805,.T.); +#62805 = EDGE_CURVE('',#61635,#62806,#62808,.T.); +#62806 = VERTEX_POINT('',#62807); +#62807 = CARTESIAN_POINT('',(-2.895,-0.87,0.52)); +#62808 = LINE('',#62809,#62810); +#62809 = CARTESIAN_POINT('',(-2.775,-0.87,0.52)); +#62810 = VECTOR('',#62811,1.); +#62811 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62812 = ORIENTED_EDGE('',*,*,#62813,.F.); +#62813 = EDGE_CURVE('',#62782,#62806,#62814,.T.); +#62814 = CIRCLE('',#62815,0.14); +#62815 = AXIS2_PLACEMENT_3D('',#62816,#62817,#62818); +#62816 = CARTESIAN_POINT('',(-2.895,-1.01,0.52)); +#62817 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62818 = DIRECTION('',(2.16E-15,1.,-1.E-15)); +#62819 = ORIENTED_EDGE('',*,*,#62781,.F.); +#62820 = CYLINDRICAL_SURFACE('',#62821,0.14); +#62821 = AXIS2_PLACEMENT_3D('',#62822,#62823,#62824); +#62822 = CARTESIAN_POINT('',(-2.775,-1.01,0.52)); +#62823 = DIRECTION('',(-1.,2.16E-15,-6.E-17)); +#62824 = DIRECTION('',(-6.E-17,2.2E-16,1.)); +#62825 = ADVANCED_FACE('',(#62826),#62844,.F.); +#62826 = FACE_BOUND('',#62827,.F.); +#62827 = EDGE_LOOP('',(#62828,#62829,#62830,#62838)); +#62828 = ORIENTED_EDGE('',*,*,#61634,.T.); +#62829 = ORIENTED_EDGE('',*,*,#62805,.T.); +#62830 = ORIENTED_EDGE('',*,*,#62831,.T.); +#62831 = EDGE_CURVE('',#62806,#62832,#62834,.T.); +#62832 = VERTEX_POINT('',#62833); +#62833 = CARTESIAN_POINT('',(-2.895,-0.87,0.24)); +#62834 = LINE('',#62835,#62836); +#62835 = CARTESIAN_POINT('',(-2.895,-0.87,0.66)); +#62836 = VECTOR('',#62837,1.); +#62837 = DIRECTION('',(-1.7E-16,5.E-17,-1.)); +#62838 = ORIENTED_EDGE('',*,*,#62839,.T.); +#62839 = EDGE_CURVE('',#62832,#61626,#62840,.T.); +#62840 = LINE('',#62841,#62842); +#62841 = CARTESIAN_POINT('',(-2.895,-0.87,0.24)); +#62842 = VECTOR('',#62843,1.); +#62843 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62844 = PLANE('',#62845); +#62845 = AXIS2_PLACEMENT_3D('',#62846,#62847,#62848); +#62846 = CARTESIAN_POINT('',(-2.835,-0.87,0.38)); +#62847 = DIRECTION('',(-1.09E-15,-1.,-3.E-17)); +#62848 = DIRECTION('',(-1.,1.09E-15,-1.E-15)); +#62849 = ADVANCED_FACE('',(#62850),#62862,.T.); +#62850 = FACE_BOUND('',#62851,.T.); +#62851 = EDGE_LOOP('',(#62852,#62859,#62860,#62861)); +#62852 = ORIENTED_EDGE('',*,*,#62853,.T.); +#62853 = EDGE_CURVE('',#62740,#62832,#62854,.T.); +#62854 = CIRCLE('',#62855,0.14); +#62855 = AXIS2_PLACEMENT_3D('',#62856,#62857,#62858); +#62856 = CARTESIAN_POINT('',(-2.895,-1.01,0.24)); +#62857 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62858 = DIRECTION('',(-2.16E-15,-1.,1.E-15)); +#62859 = ORIENTED_EDGE('',*,*,#62839,.T.); +#62860 = ORIENTED_EDGE('',*,*,#61625,.F.); +#62861 = ORIENTED_EDGE('',*,*,#62747,.F.); +#62862 = CYLINDRICAL_SURFACE('',#62863,0.14); +#62863 = AXIS2_PLACEMENT_3D('',#62864,#62865,#62866); +#62864 = CARTESIAN_POINT('',(-2.895,-1.01,0.24)); +#62865 = DIRECTION('',(1.,-2.16E-15,7.5E-16)); +#62866 = DIRECTION('',(7.5E-16,-2.2E-16,-1.)); +#62867 = ADVANCED_FACE('',(#62868),#62884,.T.); +#62868 = FACE_BOUND('',#62869,.T.); +#62869 = EDGE_LOOP('',(#62870,#62871,#62877,#62878)); +#62870 = ORIENTED_EDGE('',*,*,#62205,.T.); +#62871 = ORIENTED_EDGE('',*,*,#62872,.T.); +#62872 = EDGE_CURVE('',#62198,#61694,#62873,.T.); +#62873 = LINE('',#62874,#62875); +#62874 = CARTESIAN_POINT('',(2.925,0.525,1.32)); +#62875 = VECTOR('',#62876,1.); +#62876 = DIRECTION('',(0.,0.,-1.)); +#62877 = ORIENTED_EDGE('',*,*,#61691,.F.); +#62878 = ORIENTED_EDGE('',*,*,#62879,.F.); +#62879 = EDGE_CURVE('',#62206,#61692,#62880,.T.); +#62880 = LINE('',#62881,#62882); +#62881 = CARTESIAN_POINT('',(2.825,0.525,1.32)); +#62882 = VECTOR('',#62883,1.); +#62883 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#62884 = PLANE('',#62885); +#62885 = AXIS2_PLACEMENT_3D('',#62886,#62887,#62888); +#62886 = CARTESIAN_POINT('',(2.675,0.525,1.32)); +#62887 = DIRECTION('',(1.11E-15,1.,-1.1E-16)); +#62888 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#62889 = ADVANCED_FACE('',(#62890),#62896,.F.); +#62890 = FACE_BOUND('',#62891,.F.); +#62891 = EDGE_LOOP('',(#62892,#62893,#62894,#62895)); +#62892 = ORIENTED_EDGE('',*,*,#61832,.T.); +#62893 = ORIENTED_EDGE('',*,*,#61719,.T.); +#62894 = ORIENTED_EDGE('',*,*,#62879,.F.); +#62895 = ORIENTED_EDGE('',*,*,#62213,.F.); +#62896 = CYLINDRICAL_SURFACE('',#62897,0.15); +#62897 = AXIS2_PLACEMENT_3D('',#62898,#62899,#62900); +#62898 = CARTESIAN_POINT('',(2.825,0.675,1.32)); +#62899 = DIRECTION('',(7.2E-16,-1.1E-16,-1.)); +#62900 = DIRECTION('',(-1.,2.2E-16,-7.2E-16)); +#62901 = ADVANCED_FACE('',(#62902),#62908,.T.); +#62902 = FACE_BOUND('',#62903,.F.); +#62903 = EDGE_LOOP('',(#62904,#62905,#62906,#62907)); +#62904 = ORIENTED_EDGE('',*,*,#62197,.T.); +#62905 = ORIENTED_EDGE('',*,*,#62872,.T.); +#62906 = ORIENTED_EDGE('',*,*,#61701,.T.); +#62907 = ORIENTED_EDGE('',*,*,#62607,.T.); +#62908 = PLANE('',#62909); +#62909 = AXIS2_PLACEMENT_3D('',#62910,#62911,#62912); +#62910 = CARTESIAN_POINT('',(2.925,-1.54E-15,1.26)); +#62911 = DIRECTION('',(1.,-4.2E-16,0.)); +#62912 = DIRECTION('',(4.2E-16,1.,0.)); +#62913 = ADVANCED_FACE('',(#62914),#62930,.T.); +#62914 = FACE_BOUND('',#62915,.F.); +#62915 = EDGE_LOOP('',(#62916,#62922,#62923,#62929)); +#62916 = ORIENTED_EDGE('',*,*,#62917,.F.); +#62917 = EDGE_CURVE('',#62234,#61751,#62918,.T.); +#62918 = LINE('',#62919,#62920); +#62919 = CARTESIAN_POINT('',(-2.825,0.525,1.32)); +#62920 = VECTOR('',#62921,1.); +#62921 = DIRECTION('',(-6.E-17,1.1E-16,-1.)); +#62922 = ORIENTED_EDGE('',*,*,#62266,.T.); +#62923 = ORIENTED_EDGE('',*,*,#62924,.T.); +#62924 = EDGE_CURVE('',#62259,#61759,#62925,.T.); +#62925 = LINE('',#62926,#62927); +#62926 = CARTESIAN_POINT('',(-2.925,0.525,1.32)); +#62927 = VECTOR('',#62928,1.); +#62928 = DIRECTION('',(-5.6E-16,4.4E-16,-1.)); +#62929 = ORIENTED_EDGE('',*,*,#61758,.F.); +#62930 = PLANE('',#62931); +#62931 = AXIS2_PLACEMENT_3D('',#62932,#62933,#62934); +#62932 = CARTESIAN_POINT('',(-2.675,0.525,1.32)); +#62933 = DIRECTION('',(0.,1.,-3.3E-16)); +#62934 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#62935 = ADVANCED_FACE('',(#62936),#62942,.T.); +#62936 = FACE_BOUND('',#62937,.T.); +#62937 = EDGE_LOOP('',(#62938,#62939,#62940,#62941)); +#62938 = ORIENTED_EDGE('',*,*,#62258,.T.); +#62939 = ORIENTED_EDGE('',*,*,#62924,.T.); +#62940 = ORIENTED_EDGE('',*,*,#61766,.T.); +#62941 = ORIENTED_EDGE('',*,*,#62134,.T.); +#62942 = PLANE('',#62943); +#62943 = AXIS2_PLACEMENT_3D('',#62944,#62945,#62946); +#62944 = CARTESIAN_POINT('',(-2.925,6.1E-16,1.26)); +#62945 = DIRECTION('',(-1.,4.7E-16,-4.4E-16)); +#62946 = DIRECTION('',(-4.7E-16,-1.,4.4E-16)); +#62947 = ADVANCED_FACE('',(#62948),#63043,.F.); +#62948 = FACE_BOUND('',#62949,.F.); +#62949 = EDGE_LOOP('',(#62950,#62960,#62966,#62967,#62968,#62969,#62977, + #62985,#62994,#63002,#63011,#63019,#63028,#63036)); +#62950 = ORIENTED_EDGE('',*,*,#62951,.F.); +#62951 = EDGE_CURVE('',#62952,#62954,#62956,.T.); +#62952 = VERTEX_POINT('',#62953); +#62953 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#62954 = VERTEX_POINT('',#62955); +#62955 = CARTESIAN_POINT('',(-0.85,1.73,0.1)); +#62956 = LINE('',#62957,#62958); +#62957 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#62958 = VECTOR('',#62959,1.); +#62959 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#62960 = ORIENTED_EDGE('',*,*,#62961,.F.); +#62961 = EDGE_CURVE('',#61891,#62952,#62962,.T.); +#62962 = LINE('',#62963,#62964); +#62963 = CARTESIAN_POINT('',(-2.675,1.73,1.2)); +#62964 = VECTOR('',#62965,1.); +#62965 = DIRECTION('',(0.,0.,-1.)); +#62966 = ORIENTED_EDGE('',*,*,#61890,.F.); +#62967 = ORIENTED_EDGE('',*,*,#61865,.T.); +#62968 = ORIENTED_EDGE('',*,*,#61800,.T.); +#62969 = ORIENTED_EDGE('',*,*,#62970,.T.); +#62970 = EDGE_CURVE('',#61801,#62971,#62973,.T.); +#62971 = VERTEX_POINT('',#62972); +#62972 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#62973 = LINE('',#62974,#62975); +#62974 = CARTESIAN_POINT('',(2.675,1.73,1.2)); +#62975 = VECTOR('',#62976,1.); +#62976 = DIRECTION('',(0.,0.,-1.)); +#62977 = ORIENTED_EDGE('',*,*,#62978,.F.); +#62978 = EDGE_CURVE('',#62979,#62971,#62981,.T.); +#62979 = VERTEX_POINT('',#62980); +#62980 = CARTESIAN_POINT('',(0.85,1.73,0.1)); +#62981 = LINE('',#62982,#62983); +#62982 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#62983 = VECTOR('',#62984,1.); +#62984 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#62985 = ORIENTED_EDGE('',*,*,#62986,.T.); +#62986 = EDGE_CURVE('',#62979,#62987,#62989,.T.); +#62987 = VERTEX_POINT('',#62988); +#62988 = CARTESIAN_POINT('',(0.7,1.73,0.25)); +#62989 = CIRCLE('',#62990,0.15); +#62990 = AXIS2_PLACEMENT_3D('',#62991,#62992,#62993); +#62991 = CARTESIAN_POINT('',(0.85,1.73,0.25)); +#62992 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#62993 = DIRECTION('',(0.,-1.17E-15,-1.)); +#62994 = ORIENTED_EDGE('',*,*,#62995,.T.); +#62995 = EDGE_CURVE('',#62987,#62996,#62998,.T.); +#62996 = VERTEX_POINT('',#62997); +#62997 = CARTESIAN_POINT('',(0.7,1.73,0.45)); +#62998 = LINE('',#62999,#63000); +#62999 = CARTESIAN_POINT('',(0.7,1.73,0.65)); +#63000 = VECTOR('',#63001,1.); +#63001 = DIRECTION('',(-2.2E-16,1.22E-15,1.)); +#63002 = ORIENTED_EDGE('',*,*,#63003,.F.); +#63003 = EDGE_CURVE('',#63004,#62996,#63006,.T.); +#63004 = VERTEX_POINT('',#63005); +#63005 = CARTESIAN_POINT('',(0.55,1.73,0.6)); +#63006 = CIRCLE('',#63007,0.15); +#63007 = AXIS2_PLACEMENT_3D('',#63008,#63009,#63010); +#63008 = CARTESIAN_POINT('',(0.55,1.73,0.45)); +#63009 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63010 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63011 = ORIENTED_EDGE('',*,*,#63012,.F.); +#63012 = EDGE_CURVE('',#63013,#63004,#63015,.T.); +#63013 = VERTEX_POINT('',#63014); +#63014 = CARTESIAN_POINT('',(-0.55,1.73,0.6)); +#63015 = LINE('',#63016,#63017); +#63016 = CARTESIAN_POINT('',(-1.6125,1.73,0.6)); +#63017 = VECTOR('',#63018,1.); +#63018 = DIRECTION('',(1.,-4.4E-16,0.)); +#63019 = ORIENTED_EDGE('',*,*,#63020,.F.); +#63020 = EDGE_CURVE('',#63021,#63013,#63023,.T.); +#63021 = VERTEX_POINT('',#63022); +#63022 = CARTESIAN_POINT('',(-0.7,1.73,0.45)); +#63023 = CIRCLE('',#63024,0.15); +#63024 = AXIS2_PLACEMENT_3D('',#63025,#63026,#63027); +#63025 = CARTESIAN_POINT('',(-0.55,1.73,0.45)); +#63026 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63027 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63028 = ORIENTED_EDGE('',*,*,#63029,.T.); +#63029 = EDGE_CURVE('',#63021,#63030,#63032,.T.); +#63030 = VERTEX_POINT('',#63031); +#63031 = CARTESIAN_POINT('',(-0.7,1.73,0.25)); +#63032 = LINE('',#63033,#63034); +#63033 = CARTESIAN_POINT('',(-0.7,1.73,0.825)); +#63034 = VECTOR('',#63035,1.); +#63035 = DIRECTION('',(2.2E-16,-1.22E-15,-1.)); +#63036 = ORIENTED_EDGE('',*,*,#63037,.F.); +#63037 = EDGE_CURVE('',#62954,#63030,#63038,.T.); +#63038 = CIRCLE('',#63039,0.15); +#63039 = AXIS2_PLACEMENT_3D('',#63040,#63041,#63042); +#63040 = CARTESIAN_POINT('',(-0.85,1.73,0.25)); +#63041 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63042 = DIRECTION('',(0.,-1.17E-15,-1.)); +#63043 = PLANE('',#63044); +#63044 = AXIS2_PLACEMENT_3D('',#63045,#63046,#63047); +#63045 = CARTESIAN_POINT('',(-2.675,1.73,1.2)); +#63046 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#63047 = DIRECTION('',(4.4E-16,-2.2E-16,-1.)); +#63048 = ADVANCED_FACE('',(#63049),#63074,.T.); +#63049 = FACE_BOUND('',#63050,.T.); +#63050 = EDGE_LOOP('',(#63051,#63059,#63067,#63073)); +#63051 = ORIENTED_EDGE('',*,*,#63052,.F.); +#63052 = EDGE_CURVE('',#63053,#61801,#63055,.T.); +#63053 = VERTEX_POINT('',#63054); +#63054 = CARTESIAN_POINT('',(2.725,1.73,0.66)); +#63055 = LINE('',#63056,#63057); +#63056 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#63057 = VECTOR('',#63058,1.); +#63058 = DIRECTION('',(-1.,4.4E-16,-3.9E-16)); +#63059 = ORIENTED_EDGE('',*,*,#63060,.T.); +#63060 = EDGE_CURVE('',#63053,#63061,#63063,.T.); +#63061 = VERTEX_POINT('',#63062); +#63062 = CARTESIAN_POINT('',(2.725,1.85,0.66)); +#63063 = LINE('',#63064,#63065); +#63064 = CARTESIAN_POINT('',(2.725,1.73,0.66)); +#63065 = VECTOR('',#63066,1.); +#63066 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#63067 = ORIENTED_EDGE('',*,*,#63068,.T.); +#63068 = EDGE_CURVE('',#63061,#61809,#63069,.T.); +#63069 = LINE('',#63070,#63071); +#63070 = CARTESIAN_POINT('',(2.675,1.85,0.66)); +#63071 = VECTOR('',#63072,1.); +#63072 = DIRECTION('',(-1.,4.4E-16,-3.9E-16)); +#63073 = ORIENTED_EDGE('',*,*,#61808,.F.); +#63074 = PLANE('',#63075); +#63075 = AXIS2_PLACEMENT_3D('',#63076,#63077,#63078); +#63076 = CARTESIAN_POINT('',(2.675,1.73,0.66)); +#63077 = DIRECTION('',(-3.9E-16,2.2E-16,1.)); +#63078 = DIRECTION('',(4.4E-16,1.,-2.2E-16)); +#63079 = ADVANCED_FACE('',(#63080),#63175,.F.); +#63080 = FACE_BOUND('',#63081,.F.); +#63081 = EDGE_LOOP('',(#63082,#63092,#63101,#63109,#63118,#63126,#63135, + #63143,#63152,#63160,#63166,#63167,#63168,#63169)); +#63082 = ORIENTED_EDGE('',*,*,#63083,.T.); +#63083 = EDGE_CURVE('',#63084,#63086,#63088,.T.); +#63084 = VERTEX_POINT('',#63085); +#63085 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63086 = VERTEX_POINT('',#63087); +#63087 = CARTESIAN_POINT('',(-0.85,1.85,0.1)); +#63088 = LINE('',#63089,#63090); +#63089 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63090 = VECTOR('',#63091,1.); +#63091 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#63092 = ORIENTED_EDGE('',*,*,#63093,.T.); +#63093 = EDGE_CURVE('',#63086,#63094,#63096,.T.); +#63094 = VERTEX_POINT('',#63095); +#63095 = CARTESIAN_POINT('',(-0.7,1.85,0.25)); +#63096 = CIRCLE('',#63097,0.15); +#63097 = AXIS2_PLACEMENT_3D('',#63098,#63099,#63100); +#63098 = CARTESIAN_POINT('',(-0.85,1.85,0.25)); +#63099 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63100 = DIRECTION('',(0.,-1.17E-15,-1.)); +#63101 = ORIENTED_EDGE('',*,*,#63102,.F.); +#63102 = EDGE_CURVE('',#63103,#63094,#63105,.T.); +#63103 = VERTEX_POINT('',#63104); +#63104 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63105 = LINE('',#63106,#63107); +#63106 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63107 = VECTOR('',#63108,1.); +#63108 = DIRECTION('',(-1.E-30,-1.E-15,-1.)); +#63109 = ORIENTED_EDGE('',*,*,#63110,.T.); +#63110 = EDGE_CURVE('',#63103,#63111,#63113,.T.); +#63111 = VERTEX_POINT('',#63112); +#63112 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63113 = CIRCLE('',#63114,0.15); +#63114 = AXIS2_PLACEMENT_3D('',#63115,#63116,#63117); +#63115 = CARTESIAN_POINT('',(-0.55,1.85,0.45)); +#63116 = DIRECTION('',(-1.E-45,1.,-1.E-15)); +#63117 = DIRECTION('',(1.E-30,1.E-15,1.)); +#63118 = ORIENTED_EDGE('',*,*,#63119,.T.); +#63119 = EDGE_CURVE('',#63111,#63120,#63122,.T.); +#63120 = VERTEX_POINT('',#63121); +#63121 = CARTESIAN_POINT('',(0.55,1.85,0.6)); +#63122 = LINE('',#63123,#63124); +#63123 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63124 = VECTOR('',#63125,1.); +#63125 = DIRECTION('',(1.,0.,0.)); +#63126 = ORIENTED_EDGE('',*,*,#63127,.T.); +#63127 = EDGE_CURVE('',#63120,#63128,#63130,.T.); +#63128 = VERTEX_POINT('',#63129); +#63129 = CARTESIAN_POINT('',(0.7,1.85,0.45)); +#63130 = CIRCLE('',#63131,0.15); +#63131 = AXIS2_PLACEMENT_3D('',#63132,#63133,#63134); +#63132 = CARTESIAN_POINT('',(0.55,1.85,0.45)); +#63133 = DIRECTION('',(-1.E-45,1.,-1.E-15)); +#63134 = DIRECTION('',(1.E-30,1.E-15,1.)); +#63135 = ORIENTED_EDGE('',*,*,#63136,.F.); +#63136 = EDGE_CURVE('',#63137,#63128,#63139,.T.); +#63137 = VERTEX_POINT('',#63138); +#63138 = CARTESIAN_POINT('',(0.7,1.85,0.25)); +#63139 = LINE('',#63140,#63141); +#63140 = CARTESIAN_POINT('',(0.7,1.85,0.1)); +#63141 = VECTOR('',#63142,1.); +#63142 = DIRECTION('',(1.E-30,1.E-15,1.)); +#63143 = ORIENTED_EDGE('',*,*,#63144,.F.); +#63144 = EDGE_CURVE('',#63145,#63137,#63147,.T.); +#63145 = VERTEX_POINT('',#63146); +#63146 = CARTESIAN_POINT('',(0.85,1.85,0.1)); +#63147 = CIRCLE('',#63148,0.15); +#63148 = AXIS2_PLACEMENT_3D('',#63149,#63150,#63151); +#63149 = CARTESIAN_POINT('',(0.85,1.85,0.25)); +#63150 = DIRECTION('',(5.E-16,1.,-1.17E-15)); +#63151 = DIRECTION('',(0.,-1.17E-15,-1.)); +#63152 = ORIENTED_EDGE('',*,*,#63153,.T.); +#63153 = EDGE_CURVE('',#63145,#63154,#63156,.T.); +#63154 = VERTEX_POINT('',#63155); +#63155 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63156 = LINE('',#63157,#63158); +#63157 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63158 = VECTOR('',#63159,1.); +#63159 = DIRECTION('',(1.,-4.4E-16,2.8E-16)); +#63160 = ORIENTED_EDGE('',*,*,#63161,.T.); +#63161 = EDGE_CURVE('',#63154,#61809,#63162,.T.); +#63162 = LINE('',#63163,#63164); +#63163 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63164 = VECTOR('',#63165,1.); +#63165 = DIRECTION('',(0.,0.,1.)); +#63166 = ORIENTED_EDGE('',*,*,#61816,.T.); +#63167 = ORIENTED_EDGE('',*,*,#62174,.F.); +#63168 = ORIENTED_EDGE('',*,*,#61906,.F.); +#63169 = ORIENTED_EDGE('',*,*,#63170,.F.); +#63170 = EDGE_CURVE('',#63084,#61899,#63171,.T.); +#63171 = LINE('',#63172,#63173); +#63172 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63173 = VECTOR('',#63174,1.); +#63174 = DIRECTION('',(0.,0.,1.)); +#63175 = PLANE('',#63176); +#63176 = AXIS2_PLACEMENT_3D('',#63177,#63178,#63179); +#63177 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63178 = DIRECTION('',(-4.4E-16,-1.,2.2E-16)); +#63179 = DIRECTION('',(-4.4E-16,2.2E-16,1.)); +#63180 = ADVANCED_FACE('',(#63181),#63187,.F.); +#63181 = FACE_BOUND('',#63182,.F.); +#63182 = EDGE_LOOP('',(#63183,#63184,#63185,#63186)); +#63183 = ORIENTED_EDGE('',*,*,#62241,.T.); +#63184 = ORIENTED_EDGE('',*,*,#62917,.T.); +#63185 = ORIENTED_EDGE('',*,*,#61846,.F.); +#63186 = ORIENTED_EDGE('',*,*,#61922,.F.); +#63187 = CYLINDRICAL_SURFACE('',#63188,0.15); +#63188 = AXIS2_PLACEMENT_3D('',#63189,#63190,#63191); +#63189 = CARTESIAN_POINT('',(-2.825,0.675,1.32)); +#63190 = DIRECTION('',(-6.E-17,1.1E-16,-1.)); +#63191 = DIRECTION('',(1.,-8.9E-16,-6.E-17)); +#63192 = ADVANCED_FACE('',(#63193),#63218,.T.); +#63193 = FACE_BOUND('',#63194,.F.); +#63194 = EDGE_LOOP('',(#63195,#63203,#63211,#63217)); +#63195 = ORIENTED_EDGE('',*,*,#63196,.F.); +#63196 = EDGE_CURVE('',#63197,#61891,#63199,.T.); +#63197 = VERTEX_POINT('',#63198); +#63198 = CARTESIAN_POINT('',(-2.725,1.73,0.66)); +#63199 = LINE('',#63200,#63201); +#63200 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#63201 = VECTOR('',#63202,1.); +#63202 = DIRECTION('',(1.,-6.7E-16,2.8E-16)); +#63203 = ORIENTED_EDGE('',*,*,#63204,.T.); +#63204 = EDGE_CURVE('',#63197,#63205,#63207,.T.); +#63205 = VERTEX_POINT('',#63206); +#63206 = CARTESIAN_POINT('',(-2.725,1.85,0.66)); +#63207 = LINE('',#63208,#63209); +#63208 = CARTESIAN_POINT('',(-2.725,1.73,0.66)); +#63209 = VECTOR('',#63210,1.); +#63210 = DIRECTION('',(6.7E-16,1.,-4.4E-16)); +#63211 = ORIENTED_EDGE('',*,*,#63212,.T.); +#63212 = EDGE_CURVE('',#63205,#61899,#63213,.T.); +#63213 = LINE('',#63214,#63215); +#63214 = CARTESIAN_POINT('',(-2.675,1.85,0.66)); +#63215 = VECTOR('',#63216,1.); +#63216 = DIRECTION('',(1.,-6.7E-16,2.8E-16)); +#63217 = ORIENTED_EDGE('',*,*,#61898,.F.); +#63218 = PLANE('',#63219); +#63219 = AXIS2_PLACEMENT_3D('',#63220,#63221,#63222); +#63220 = CARTESIAN_POINT('',(-2.675,1.73,0.66)); +#63221 = DIRECTION('',(-2.8E-16,0.,1.)); +#63222 = DIRECTION('',(-6.7E-16,-1.,-1.876E-31)); +#63223 = ADVANCED_FACE('',(#63224,#63234),#63276,.T.); +#63224 = FACE_BOUND('',#63225,.T.); +#63225 = EDGE_LOOP('',(#63226,#63227,#63228,#63229,#63230,#63231,#63232, + #63233)); +#63226 = ORIENTED_EDGE('',*,*,#61936,.T.); +#63227 = ORIENTED_EDGE('',*,*,#61992,.T.); +#63228 = ORIENTED_EDGE('',*,*,#62041,.T.); +#63229 = ORIENTED_EDGE('',*,*,#62100,.F.); +#63230 = ORIENTED_EDGE('',*,*,#62115,.T.); +#63231 = ORIENTED_EDGE('',*,*,#62075,.F.); +#63232 = ORIENTED_EDGE('',*,*,#62017,.T.); +#63233 = ORIENTED_EDGE('',*,*,#61977,.F.); +#63234 = FACE_BOUND('',#63235,.T.); +#63235 = EDGE_LOOP('',(#63236,#63248,#63258,#63268)); +#63236 = ORIENTED_EDGE('',*,*,#63237,.F.); +#63237 = EDGE_CURVE('',#63238,#63240,#63242,.T.); +#63238 = VERTEX_POINT('',#63239); +#63239 = CARTESIAN_POINT('',(1.837322093506,-0.942322063626,1.9)); +#63240 = VERTEX_POINT('',#63241); +#63241 = CARTESIAN_POINT('',(-1.837322093506,-0.942322063626,1.9)); +#63242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63243,#63244,#63245,#63246, + #63247),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#63243 = CARTESIAN_POINT('',(2.284805319193,-0.942322063626,1.9)); +#63244 = CARTESIAN_POINT('',(2.20941310814,-0.942322063626,1.9)); +#63245 = CARTESIAN_POINT('',(-1.33E-15,-0.942322063626,1.9)); +#63246 = CARTESIAN_POINT('',(-2.20941310814,-0.942322063626,1.9)); +#63247 = CARTESIAN_POINT('',(-2.284805319193,-0.942322063626,1.9)); +#63248 = ORIENTED_EDGE('',*,*,#63249,.F.); +#63249 = EDGE_CURVE('',#63250,#63238,#63252,.T.); +#63250 = VERTEX_POINT('',#63251); +#63251 = CARTESIAN_POINT('',(1.837322093506,0.942322063626,1.9)); +#63252 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63253,#63254,#63255,#63256, + #63257),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#63253 = CARTESIAN_POINT('',(1.837322063626,1.324076519193,1.9)); +#63254 = CARTESIAN_POINT('',(1.837322063626,1.28154870814,1.9)); +#63255 = CARTESIAN_POINT('',(1.837322063626,8.9E-16,1.9)); +#63256 = CARTESIAN_POINT('',(1.837322063626,-1.28154870814,1.9)); +#63257 = CARTESIAN_POINT('',(1.837322063626,-1.324076519193,1.9)); +#63258 = ORIENTED_EDGE('',*,*,#63259,.F.); +#63259 = EDGE_CURVE('',#63260,#63250,#63262,.T.); +#63260 = VERTEX_POINT('',#63261); +#63261 = CARTESIAN_POINT('',(-1.837322063626,0.9423224875,1.9)); +#63262 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63263,#63264,#63265,#63266, + #63267),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.231640530177, + -8.08561080718E-02,4.187185686103,4.337970108208),.UNSPECIFIED.); +#63263 = CARTESIAN_POINT('',(-2.284805319193,0.942322063626,1.9)); +#63264 = CARTESIAN_POINT('',(-2.20941310814,0.942322063626,1.9)); +#63265 = CARTESIAN_POINT('',(0.,0.942322063626,1.9)); +#63266 = CARTESIAN_POINT('',(2.20941310814,0.942322063626,1.9)); +#63267 = CARTESIAN_POINT('',(2.284805319193,0.942322063626,1.9)); +#63268 = ORIENTED_EDGE('',*,*,#63269,.F.); +#63269 = EDGE_CURVE('',#63240,#63260,#63270,.T.); +#63270 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#63271,#63272,#63273,#63274, + #63275),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.165911730177, + -8.08561080718E-02,2.397185686103,2.482241308208),.UNSPECIFIED.); +#63271 = CARTESIAN_POINT('',(-1.837322063626,-1.324076519193,1.9)); +#63272 = CARTESIAN_POINT('',(-1.837322063626,-1.28154870814,1.9)); +#63273 = CARTESIAN_POINT('',(-1.837322063626,1.33E-15,1.9)); +#63274 = CARTESIAN_POINT('',(-1.837322063626,1.28154870814,1.9)); +#63275 = CARTESIAN_POINT('',(-1.837322063626,1.324076519193,1.9)); +#63276 = PLANE('',#63277); +#63277 = AXIS2_PLACEMENT_3D('',#63278,#63279,#63280); +#63278 = CARTESIAN_POINT('',(2.053164789016,1.158164789016,1.9)); +#63279 = DIRECTION('',(-2.7E-16,5.8E-16,1.)); +#63280 = DIRECTION('',(-0.870984046787,-0.491311296677, + 4.979485944017E-17)); +#63281 = ADVANCED_FACE('',(#63282),#63300,.T.); +#63282 = FACE_BOUND('',#63283,.T.); +#63283 = EDGE_LOOP('',(#63284,#63291,#63292,#63299)); +#63284 = ORIENTED_EDGE('',*,*,#63285,.F.); +#63285 = EDGE_CURVE('',#63250,#62297,#63286,.T.); +#63286 = CIRCLE('',#63287,0.32); +#63287 = AXIS2_PLACEMENT_3D('',#63288,#63289,#63290); +#63288 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#63289 = DIRECTION('',(-1.08E-15,1.,-3.47E-15)); +#63290 = DIRECTION('',(1.,1.079999675991E-15,-9.33744429E-08)); +#63291 = ORIENTED_EDGE('',*,*,#63249,.T.); +#63292 = ORIENTED_EDGE('',*,*,#63293,.T.); +#63293 = EDGE_CURVE('',#63238,#62284,#63294,.T.); +#63294 = CIRCLE('',#63295,0.32); +#63295 = AXIS2_PLACEMENT_3D('',#63296,#63297,#63298); +#63296 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#63297 = DIRECTION('',(3.7E-16,1.,3.12E-15)); +#63298 = DIRECTION('',(1.,-3.699997086717E-16,-9.337443943E-08)); +#63299 = ORIENTED_EDGE('',*,*,#62296,.F.); +#63300 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63301,#63302,#63303,#63304,#63305) + ,(#63306,#63307,#63308,#63309,#63310) + ,(#63311,#63312,#63313,#63314,#63315 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,2.478041794175),(-0.165911730177,-8.08561080718E-02, + 2.397185686103,2.482241308208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63301 = CARTESIAN_POINT('',(2.134020897087,1.324076519193, + 1.699874109893)); +#63302 = CARTESIAN_POINT('',(2.134020897087,1.28154870814,1.699874109893 + )); +#63303 = CARTESIAN_POINT('',(2.134020897087,8.9E-16,1.699874109893)); +#63304 = CARTESIAN_POINT('',(2.134020897087,-1.28154870814, + 1.699874109893)); +#63305 = CARTESIAN_POINT('',(2.134020897087,-1.324076519193, + 1.699874109893)); +#63306 = CARTESIAN_POINT('',(2.053164789016,1.324076519193,1.9)); +#63307 = CARTESIAN_POINT('',(2.053164789016,1.28154870814,1.9)); +#63308 = CARTESIAN_POINT('',(2.053164789016,1.07E-15,1.9)); +#63309 = CARTESIAN_POINT('',(2.053164789016,-1.28154870814,1.9)); +#63310 = CARTESIAN_POINT('',(2.053164789016,-1.324076519193,1.9)); +#63311 = CARTESIAN_POINT('',(1.837322063626,1.324076519193,1.9)); +#63312 = CARTESIAN_POINT('',(1.837322063626,1.28154870814,1.9)); +#63313 = CARTESIAN_POINT('',(1.837322063626,8.9E-16,1.9)); +#63314 = CARTESIAN_POINT('',(1.837322063626,-1.28154870814,1.9)); +#63315 = CARTESIAN_POINT('',(1.837322063626,-1.324076519193,1.9)); +#63316 = ADVANCED_FACE('',(#63317),#63328,.T.); +#63317 = FACE_BOUND('',#63318,.T.); +#63318 = EDGE_LOOP('',(#63319,#63326,#63327)); +#63319 = ORIENTED_EDGE('',*,*,#63320,.F.); +#63320 = EDGE_CURVE('',#63250,#62327,#63321,.T.); +#63321 = CIRCLE('',#63322,0.32); +#63322 = AXIS2_PLACEMENT_3D('',#63323,#63324,#63325); +#63323 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#63324 = DIRECTION('',(-1.,-3.772572001E-08,9.33744429E-08)); +#63325 = DIRECTION('',(-3.772572001E-08,1.,5.000000000002E-17)); +#63326 = ORIENTED_EDGE('',*,*,#63285,.T.); +#63327 = ORIENTED_EDGE('',*,*,#62339,.F.); +#63328 = SPHERICAL_SURFACE('',#63329,0.32); +#63329 = AXIS2_PLACEMENT_3D('',#63330,#63331,#63332); +#63330 = CARTESIAN_POINT('',(1.837322063626,0.942322063626,1.58)); +#63331 = DIRECTION('',(-9.33744429E-08,-3.47E-15,-1.)); +#63332 = DIRECTION('',(-3.772572001E-08,1.,5.261808893513E-17)); +#63333 = ADVANCED_FACE('',(#63334),#63345,.T.); +#63334 = FACE_BOUND('',#63335,.T.); +#63335 = EDGE_LOOP('',(#63336,#63337,#63338)); +#63336 = ORIENTED_EDGE('',*,*,#62389,.T.); +#63337 = ORIENTED_EDGE('',*,*,#63293,.F.); +#63338 = ORIENTED_EDGE('',*,*,#63339,.T.); +#63339 = EDGE_CURVE('',#63238,#62377,#63340,.T.); +#63340 = CIRCLE('',#63341,0.32); +#63341 = AXIS2_PLACEMENT_3D('',#63342,#63343,#63344); +#63342 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#63343 = DIRECTION('',(1.,-3.772572086E-08,-9.337443943E-08)); +#63344 = DIRECTION('',(-3.772572086E-08,-1.,4.E-16)); +#63345 = SPHERICAL_SURFACE('',#63346,0.32); +#63346 = AXIS2_PLACEMENT_3D('',#63347,#63348,#63349); +#63347 = CARTESIAN_POINT('',(1.837322063626,-0.942322063626,1.58)); +#63348 = DIRECTION('',(-9.337443943E-08,3.12E-15,-1.)); +#63349 = DIRECTION('',(-3.772572086E-08,-1.,4.026180373952E-16)); +#63350 = ADVANCED_FACE('',(#63351),#63363,.T.); +#63351 = FACE_BOUND('',#63352,.T.); +#63352 = EDGE_LOOP('',(#63353,#63360,#63361,#63362)); +#63353 = ORIENTED_EDGE('',*,*,#63354,.F.); +#63354 = EDGE_CURVE('',#63260,#62428,#63355,.T.); +#63355 = CIRCLE('',#63356,0.32); +#63356 = AXIS2_PLACEMENT_3D('',#63357,#63358,#63359); +#63357 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#63358 = DIRECTION('',(-1.,-2.3998E-13,-3.5388E-13)); +#63359 = DIRECTION('',(-2.39979531248E-13,0.999999999999, + -1.32460672916E-06)); +#63360 = ORIENTED_EDGE('',*,*,#63259,.T.); +#63361 = ORIENTED_EDGE('',*,*,#63320,.T.); +#63362 = ORIENTED_EDGE('',*,*,#62427,.F.); +#63363 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63364,#63365,#63366,#63367,#63368) + ,(#63369,#63370,#63371,#63372,#63373) + ,(#63374,#63375,#63376,#63377,#63378 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,4.268041794175),(-0.231640530177,-8.08561080718E-02, + 4.187185686103,4.337970108208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63364 = CARTESIAN_POINT('',(-2.284805319193,1.239020897087, + 1.699874109893)); +#63365 = CARTESIAN_POINT('',(-2.20941310814,1.239020897087, + 1.699874109893)); +#63366 = CARTESIAN_POINT('',(0.,1.239020897087,1.699874109893)); +#63367 = CARTESIAN_POINT('',(2.20941310814,1.239020897087,1.699874109893 + )); +#63368 = CARTESIAN_POINT('',(2.284805319193,1.239020897087, + 1.699874109893)); +#63369 = CARTESIAN_POINT('',(-2.284805319193,1.158164789016,1.9)); +#63370 = CARTESIAN_POINT('',(-2.20941310814,1.158164789016,1.9)); +#63371 = CARTESIAN_POINT('',(4.E-16,1.158164789016,1.9)); +#63372 = CARTESIAN_POINT('',(2.20941310814,1.158164789016,1.9)); +#63373 = CARTESIAN_POINT('',(2.284805319193,1.158164789016,1.9)); +#63374 = CARTESIAN_POINT('',(-2.284805319193,0.942322063626,1.9)); +#63375 = CARTESIAN_POINT('',(-2.20941310814,0.942322063626,1.9)); +#63376 = CARTESIAN_POINT('',(0.,0.942322063626,1.9)); +#63377 = CARTESIAN_POINT('',(2.20941310814,0.942322063626,1.9)); +#63378 = CARTESIAN_POINT('',(2.284805319193,0.942322063626,1.9)); +#63379 = ADVANCED_FACE('',(#63380),#63392,.T.); +#63380 = FACE_BOUND('',#63381,.T.); +#63381 = EDGE_LOOP('',(#63382,#63383,#63384,#63391)); +#63382 = ORIENTED_EDGE('',*,*,#63339,.F.); +#63383 = ORIENTED_EDGE('',*,*,#63237,.T.); +#63384 = ORIENTED_EDGE('',*,*,#63385,.T.); +#63385 = EDGE_CURVE('',#63240,#62458,#63386,.T.); +#63386 = CIRCLE('',#63387,0.32); +#63387 = AXIS2_PLACEMENT_3D('',#63388,#63389,#63390); +#63388 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#63389 = DIRECTION('',(1.,3.772571871E-08,9.337443596E-08)); +#63390 = DIRECTION('',(3.772571871E-08,-1.,5.000000000002E-17)); +#63391 = ORIENTED_EDGE('',*,*,#62470,.F.); +#63392 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63393,#63394,#63395,#63396,#63397) + ,(#63398,#63399,#63400,#63401,#63402) + ,(#63403,#63404,#63405,#63406,#63407 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,4.268041794175),(-0.231640530177,-8.08561080718E-02, + 4.187185686103,4.337970108208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63393 = CARTESIAN_POINT('',(2.284805319193,-1.239020897087, + 1.699874109893)); +#63394 = CARTESIAN_POINT('',(2.20941310814,-1.239020897087, + 1.699874109893)); +#63395 = CARTESIAN_POINT('',(-1.33E-15,-1.239020897087,1.699874109893)); +#63396 = CARTESIAN_POINT('',(-2.20941310814,-1.239020897087, + 1.699874109893)); +#63397 = CARTESIAN_POINT('',(-2.284805319193,-1.239020897087, + 1.699874109893)); +#63398 = CARTESIAN_POINT('',(2.284805319193,-1.158164789016,1.9)); +#63399 = CARTESIAN_POINT('',(2.20941310814,-1.158164789016,1.9)); +#63400 = CARTESIAN_POINT('',(-1.74E-15,-1.158164789016,1.9)); +#63401 = CARTESIAN_POINT('',(-2.20941310814,-1.158164789016,1.9)); +#63402 = CARTESIAN_POINT('',(-2.284805319193,-1.158164789016,1.9)); +#63403 = CARTESIAN_POINT('',(2.284805319193,-0.942322063626,1.9)); +#63404 = CARTESIAN_POINT('',(2.20941310814,-0.942322063626,1.9)); +#63405 = CARTESIAN_POINT('',(-1.33E-15,-0.942322063626,1.9)); +#63406 = CARTESIAN_POINT('',(-2.20941310814,-0.942322063626,1.9)); +#63407 = CARTESIAN_POINT('',(-2.284805319193,-0.942322063626,1.9)); +#63408 = ADVANCED_FACE('',(#63409),#63420,.T.); +#63409 = FACE_BOUND('',#63410,.T.); +#63410 = EDGE_LOOP('',(#63411,#63418,#63419)); +#63411 = ORIENTED_EDGE('',*,*,#63412,.F.); +#63412 = EDGE_CURVE('',#63260,#62490,#63413,.T.); +#63413 = CIRCLE('',#63414,0.32); +#63414 = AXIS2_PLACEMENT_3D('',#63415,#63416,#63417); +#63415 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#63416 = DIRECTION('',(5.3517547582E-07,-0.999999999999, + 1.32460672916E-06)); +#63417 = DIRECTION('',(-1.,-5.3517547582E-07,3.5501E-13)); +#63418 = ORIENTED_EDGE('',*,*,#63354,.T.); +#63419 = ORIENTED_EDGE('',*,*,#62489,.F.); +#63420 = SPHERICAL_SURFACE('',#63421,0.32); +#63421 = AXIS2_PLACEMENT_3D('',#63422,#63423,#63424); +#63422 = CARTESIAN_POINT('',(-1.837322063626,0.942322063626,1.58)); +#63423 = DIRECTION('',(3.5388E-13,-1.32460672916E-06,-0.999999999999)); +#63424 = DIRECTION('',(-1.,-5.351754758199E-07,3.550170365529E-13)); +#63425 = ADVANCED_FACE('',(#63426),#63437,.T.); +#63426 = FACE_BOUND('',#63427,.T.); +#63427 = EDGE_LOOP('',(#63428,#63429,#63436)); +#63428 = ORIENTED_EDGE('',*,*,#63385,.F.); +#63429 = ORIENTED_EDGE('',*,*,#63430,.T.); +#63430 = EDGE_CURVE('',#63240,#62539,#63431,.T.); +#63431 = CIRCLE('',#63432,0.32); +#63432 = AXIS2_PLACEMENT_3D('',#63433,#63434,#63435); +#63433 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#63434 = DIRECTION('',(8.8E-16,-1.,-3.47E-15)); +#63435 = DIRECTION('',(-1.,-8.799996759907E-16,-9.337443596E-08)); +#63436 = ORIENTED_EDGE('',*,*,#62551,.F.); +#63437 = SPHERICAL_SURFACE('',#63438,0.32); +#63438 = AXIS2_PLACEMENT_3D('',#63439,#63440,#63441); +#63439 = CARTESIAN_POINT('',(-1.837322063626,-0.942322063626,1.58)); +#63440 = DIRECTION('',(9.337443596E-08,3.47E-15,-1.)); +#63441 = DIRECTION('',(3.772571871E-08,-1.,5.261770573187E-17)); +#63442 = ADVANCED_FACE('',(#63443),#63449,.T.); +#63443 = FACE_BOUND('',#63444,.T.); +#63444 = EDGE_LOOP('',(#63445,#63446,#63447,#63448)); +#63445 = ORIENTED_EDGE('',*,*,#63430,.F.); +#63446 = ORIENTED_EDGE('',*,*,#63269,.T.); +#63447 = ORIENTED_EDGE('',*,*,#63412,.T.); +#63448 = ORIENTED_EDGE('',*,*,#62589,.F.); +#63449 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,( + (#63450,#63451,#63452,#63453,#63454) + ,(#63455,#63456,#63457,#63458,#63459) + ,(#63460,#63461,#63462,#63463,#63464 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3 + ),(0.,2.478041794175),(-0.165911730177,-8.08561080718E-02, + 2.397185686103,2.482241308208),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.,1.,1.) + ,(0.829037572555,0.829037572555,0.829037572555,0.829037572555 + ,0.829037572555) +,(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#63450 = CARTESIAN_POINT('',(-2.134020897087,-1.324076519193, + 1.699874109893)); +#63451 = CARTESIAN_POINT('',(-2.134020897087,-1.28154870814, + 1.699874109893)); +#63452 = CARTESIAN_POINT('',(-2.134020897087,1.11E-15,1.699874109893)); +#63453 = CARTESIAN_POINT('',(-2.134020897087,1.28154870814, + 1.699874109893)); +#63454 = CARTESIAN_POINT('',(-2.134020897087,1.324076519193, + 1.699874109893)); +#63455 = CARTESIAN_POINT('',(-2.053164789016,-1.324076519193,1.9)); +#63456 = CARTESIAN_POINT('',(-2.053164789016,-1.28154870814,1.9)); +#63457 = CARTESIAN_POINT('',(-2.053164789016,1.07E-15,1.9)); +#63458 = CARTESIAN_POINT('',(-2.053164789016,1.28154870814,1.9)); +#63459 = CARTESIAN_POINT('',(-2.053164789016,1.324076519193,1.9)); +#63460 = CARTESIAN_POINT('',(-1.837322063626,-1.324076519193,1.9)); +#63461 = CARTESIAN_POINT('',(-1.837322063626,-1.28154870814,1.9)); +#63462 = CARTESIAN_POINT('',(-1.837322063626,1.33E-15,1.9)); +#63463 = CARTESIAN_POINT('',(-1.837322063626,1.28154870814,1.9)); +#63464 = CARTESIAN_POINT('',(-1.837322063626,1.324076519193,1.9)); +#63465 = ADVANCED_FACE('',(#63466),#63484,.T.); +#63466 = FACE_BOUND('',#63467,.F.); +#63467 = EDGE_LOOP('',(#63468,#63469,#63477,#63483)); +#63468 = ORIENTED_EDGE('',*,*,#62707,.F.); +#63469 = ORIENTED_EDGE('',*,*,#63470,.T.); +#63470 = EDGE_CURVE('',#62699,#63471,#63473,.T.); +#63471 = VERTEX_POINT('',#63472); +#63472 = CARTESIAN_POINT('',(2.895,-1.01,0.66)); +#63473 = LINE('',#63474,#63475); +#63474 = CARTESIAN_POINT('',(2.775,-1.01,0.66)); +#63475 = VECTOR('',#63476,1.); +#63476 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#63477 = ORIENTED_EDGE('',*,*,#63478,.T.); +#63478 = EDGE_CURVE('',#63471,#62626,#63479,.T.); +#63479 = LINE('',#63480,#63481); +#63480 = CARTESIAN_POINT('',(2.895,-0.87,0.66)); +#63481 = VECTOR('',#63482,1.); +#63482 = DIRECTION('',(8.3E-16,-1.,-1.1E-16)); +#63483 = ORIENTED_EDGE('',*,*,#62634,.F.); +#63484 = PLANE('',#63485); +#63485 = AXIS2_PLACEMENT_3D('',#63486,#63487,#63488); +#63486 = CARTESIAN_POINT('',(2.775,-0.87,0.66)); +#63487 = DIRECTION('',(-1.17E-15,-1.1E-16,1.)); +#63488 = DIRECTION('',(-1.,-8.3E-16,-1.17E-15)); +#63489 = ADVANCED_FACE('',(#63490),#63508,.T.); +#63490 = FACE_BOUND('',#63491,.F.); +#63491 = EDGE_LOOP('',(#63492,#63500,#63506,#63507)); +#63492 = ORIENTED_EDGE('',*,*,#63493,.F.); +#63493 = EDGE_CURVE('',#63494,#62649,#63496,.T.); +#63494 = VERTEX_POINT('',#63495); +#63495 = CARTESIAN_POINT('',(2.895,-1.01,0.1)); +#63496 = LINE('',#63497,#63498); +#63497 = CARTESIAN_POINT('',(2.895,-0.87,0.1)); +#63498 = VECTOR('',#63499,1.); +#63499 = DIRECTION('',(-8.9E-16,-1.,-3.9E-16)); +#63500 = ORIENTED_EDGE('',*,*,#63501,.T.); +#63501 = EDGE_CURVE('',#63494,#62674,#63502,.T.); +#63502 = LINE('',#63503,#63504); +#63503 = CARTESIAN_POINT('',(2.895,-1.01,0.1)); +#63504 = VECTOR('',#63505,1.); +#63505 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#63506 = ORIENTED_EDGE('',*,*,#62673,.T.); +#63507 = ORIENTED_EDGE('',*,*,#62659,.F.); +#63508 = PLANE('',#63509); +#63509 = AXIS2_PLACEMENT_3D('',#63510,#63511,#63512); +#63510 = CARTESIAN_POINT('',(2.895,-0.87,0.1)); +#63511 = DIRECTION('',(4.7E-16,1.1E-16,-1.)); +#63512 = DIRECTION('',(1.,8.3E-16,4.7E-16)); +#63513 = ADVANCED_FACE('',(#63514),#63533,.T.); +#63514 = FACE_BOUND('',#63515,.T.); +#63515 = EDGE_LOOP('',(#63516,#63517,#63526,#63532)); +#63516 = ORIENTED_EDGE('',*,*,#63470,.T.); +#63517 = ORIENTED_EDGE('',*,*,#63518,.T.); +#63518 = EDGE_CURVE('',#63471,#63519,#63521,.T.); +#63519 = VERTEX_POINT('',#63520); +#63520 = CARTESIAN_POINT('',(2.895,-0.87,0.52)); +#63521 = CIRCLE('',#63522,0.14); +#63522 = AXIS2_PLACEMENT_3D('',#63523,#63524,#63525); +#63523 = CARTESIAN_POINT('',(2.895,-1.01,0.52)); +#63524 = DIRECTION('',(-1.,-8.3E-16,-1.17E-15)); +#63525 = DIRECTION('',(-8.3E-16,1.,-6.7E-16)); +#63526 = ORIENTED_EDGE('',*,*,#63527,.F.); +#63527 = EDGE_CURVE('',#62691,#63519,#63528,.T.); +#63528 = LINE('',#63529,#63530); +#63529 = CARTESIAN_POINT('',(2.775,-0.87,0.52)); +#63530 = VECTOR('',#63531,1.); +#63531 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#63532 = ORIENTED_EDGE('',*,*,#62698,.F.); +#63533 = CYLINDRICAL_SURFACE('',#63534,0.14); +#63534 = AXIS2_PLACEMENT_3D('',#63535,#63536,#63537); +#63535 = CARTESIAN_POINT('',(2.775,-1.01,0.52)); +#63536 = DIRECTION('',(1.,8.3E-16,7.2E-16)); +#63537 = DIRECTION('',(-7.2E-16,-1.1E-16,1.)); +#63538 = ADVANCED_FACE('',(#63539),#63557,.F.); +#63539 = FACE_BOUND('',#63540,.T.); +#63540 = EDGE_LOOP('',(#63541,#63542,#63543,#63551)); +#63541 = ORIENTED_EDGE('',*,*,#62690,.T.); +#63542 = ORIENTED_EDGE('',*,*,#63527,.T.); +#63543 = ORIENTED_EDGE('',*,*,#63544,.T.); +#63544 = EDGE_CURVE('',#63519,#63545,#63547,.T.); +#63545 = VERTEX_POINT('',#63546); +#63546 = CARTESIAN_POINT('',(2.895,-0.87,0.24)); +#63547 = LINE('',#63548,#63549); +#63548 = CARTESIAN_POINT('',(2.895,-0.87,0.66)); +#63549 = VECTOR('',#63550,1.); +#63550 = DIRECTION('',(1.39E-15,3.9E-16,-1.)); +#63551 = ORIENTED_EDGE('',*,*,#63552,.T.); +#63552 = EDGE_CURVE('',#63545,#62682,#63553,.T.); +#63553 = LINE('',#63554,#63555); +#63554 = CARTESIAN_POINT('',(2.895,-0.87,0.24)); +#63555 = VECTOR('',#63556,1.); +#63556 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#63557 = PLANE('',#63558); +#63558 = AXIS2_PLACEMENT_3D('',#63559,#63560,#63561); +#63559 = CARTESIAN_POINT('',(2.835,-0.87,0.38)); +#63560 = DIRECTION('',(-2.4E-16,-1.,-3.6E-16)); +#63561 = DIRECTION('',(-1.,2.4E-16,2.2E-16)); +#63562 = ADVANCED_FACE('',(#63563),#63575,.T.); +#63563 = FACE_BOUND('',#63564,.T.); +#63564 = EDGE_LOOP('',(#63565,#63566,#63567,#63568)); +#63565 = ORIENTED_EDGE('',*,*,#63501,.T.); +#63566 = ORIENTED_EDGE('',*,*,#62681,.T.); +#63567 = ORIENTED_EDGE('',*,*,#63552,.F.); +#63568 = ORIENTED_EDGE('',*,*,#63569,.F.); +#63569 = EDGE_CURVE('',#63494,#63545,#63570,.T.); +#63570 = CIRCLE('',#63571,0.14); +#63571 = AXIS2_PLACEMENT_3D('',#63572,#63573,#63574); +#63572 = CARTESIAN_POINT('',(2.895,-1.01,0.24)); +#63573 = DIRECTION('',(1.,8.3E-16,4.7E-16)); +#63574 = DIRECTION('',(8.3E-16,-1.,6.7E-16)); +#63575 = CYLINDRICAL_SURFACE('',#63576,0.14); +#63576 = AXIS2_PLACEMENT_3D('',#63577,#63578,#63579); +#63577 = CARTESIAN_POINT('',(2.895,-1.01,0.24)); +#63578 = DIRECTION('',(-1.,-8.3E-16,-3.E-17)); +#63579 = DIRECTION('',(3.E-17,1.1E-16,-1.)); +#63580 = ADVANCED_FACE('',(#63581),#63589,.T.); +#63581 = FACE_BOUND('',#63582,.T.); +#63582 = EDGE_LOOP('',(#63583,#63584,#63585,#63586,#63587,#63588)); +#63583 = ORIENTED_EDGE('',*,*,#62789,.F.); +#63584 = ORIENTED_EDGE('',*,*,#62813,.T.); +#63585 = ORIENTED_EDGE('',*,*,#62831,.T.); +#63586 = ORIENTED_EDGE('',*,*,#62853,.F.); +#63587 = ORIENTED_EDGE('',*,*,#62739,.T.); +#63588 = ORIENTED_EDGE('',*,*,#62723,.F.); +#63589 = PLANE('',#63590); +#63590 = AXIS2_PLACEMENT_3D('',#63591,#63592,#63593); +#63591 = CARTESIAN_POINT('',(-2.895,-0.87,0.66)); +#63592 = DIRECTION('',(-1.,4.4E-16,1.7E-16)); +#63593 = DIRECTION('',(-1.7E-16,5.E-17,-1.)); +#63594 = ADVANCED_FACE('',(#63595),#63603,.T.); +#63595 = FACE_BOUND('',#63596,.F.); +#63596 = EDGE_LOOP('',(#63597,#63598,#63599,#63600,#63601,#63602)); +#63597 = ORIENTED_EDGE('',*,*,#63478,.F.); +#63598 = ORIENTED_EDGE('',*,*,#63518,.T.); +#63599 = ORIENTED_EDGE('',*,*,#63544,.T.); +#63600 = ORIENTED_EDGE('',*,*,#63569,.F.); +#63601 = ORIENTED_EDGE('',*,*,#63493,.T.); +#63602 = ORIENTED_EDGE('',*,*,#62765,.F.); +#63603 = PLANE('',#63604); +#63604 = AXIS2_PLACEMENT_3D('',#63605,#63606,#63607); +#63605 = CARTESIAN_POINT('',(2.895,-0.87,0.66)); +#63606 = DIRECTION('',(1.,-8.9E-16,9.4E-16)); +#63607 = DIRECTION('',(-9.4E-16,-3.9E-16,1.)); +#63608 = ADVANCED_FACE('',(#63609),#63625,.F.); +#63609 = FACE_BOUND('',#63610,.F.); +#63610 = EDGE_LOOP('',(#63611,#63612,#63618,#63619)); +#63611 = ORIENTED_EDGE('',*,*,#63083,.F.); +#63612 = ORIENTED_EDGE('',*,*,#63613,.F.); +#63613 = EDGE_CURVE('',#62952,#63084,#63614,.T.); +#63614 = LINE('',#63615,#63616); +#63615 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63616 = VECTOR('',#63617,1.); +#63617 = DIRECTION('',(0.,1.,0.)); +#63618 = ORIENTED_EDGE('',*,*,#62951,.T.); +#63619 = ORIENTED_EDGE('',*,*,#63620,.F.); +#63620 = EDGE_CURVE('',#63086,#62954,#63621,.T.); +#63621 = LINE('',#63622,#63623); +#63622 = CARTESIAN_POINT('',(-0.85,1.85,0.1)); +#63623 = VECTOR('',#63624,1.); +#63624 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63625 = PLANE('',#63626); +#63626 = AXIS2_PLACEMENT_3D('',#63627,#63628,#63629); +#63627 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63628 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#63629 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#63630 = ADVANCED_FACE('',(#63631),#63642,.T.); +#63631 = FACE_BOUND('',#63632,.T.); +#63632 = EDGE_LOOP('',(#63633,#63634,#63640,#63641)); +#63633 = ORIENTED_EDGE('',*,*,#63093,.T.); +#63634 = ORIENTED_EDGE('',*,*,#63635,.T.); +#63635 = EDGE_CURVE('',#63094,#63030,#63636,.T.); +#63636 = LINE('',#63637,#63638); +#63637 = CARTESIAN_POINT('',(-0.7,1.85,0.25)); +#63638 = VECTOR('',#63639,1.); +#63639 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63640 = ORIENTED_EDGE('',*,*,#63037,.F.); +#63641 = ORIENTED_EDGE('',*,*,#63620,.F.); +#63642 = CYLINDRICAL_SURFACE('',#63643,0.15); +#63643 = AXIS2_PLACEMENT_3D('',#63644,#63645,#63646); +#63644 = CARTESIAN_POINT('',(-0.85,1.85,0.25)); +#63645 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63646 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#63647 = ADVANCED_FACE('',(#63648),#63666,.T.); +#63648 = FACE_BOUND('',#63649,.F.); +#63649 = EDGE_LOOP('',(#63650,#63658,#63664,#63665)); +#63650 = ORIENTED_EDGE('',*,*,#63651,.F.); +#63651 = EDGE_CURVE('',#63652,#62952,#63654,.T.); +#63652 = VERTEX_POINT('',#63653); +#63653 = CARTESIAN_POINT('',(-2.725,1.73,0.1)); +#63654 = LINE('',#63655,#63656); +#63655 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63656 = VECTOR('',#63657,1.); +#63657 = DIRECTION('',(1.,-6.7E-16,2.8E-16)); +#63658 = ORIENTED_EDGE('',*,*,#63659,.T.); +#63659 = EDGE_CURVE('',#63652,#63197,#63660,.T.); +#63660 = LINE('',#63661,#63662); +#63661 = CARTESIAN_POINT('',(-2.725,1.73,0.1)); +#63662 = VECTOR('',#63663,1.); +#63663 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#63664 = ORIENTED_EDGE('',*,*,#63196,.T.); +#63665 = ORIENTED_EDGE('',*,*,#62961,.T.); +#63666 = PLANE('',#63667); +#63667 = AXIS2_PLACEMENT_3D('',#63668,#63669,#63670); +#63668 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63669 = DIRECTION('',(-6.7E-16,-1.,2.2E-16)); +#63670 = DIRECTION('',(0.,-2.2E-16,-1.)); +#63671 = ADVANCED_FACE('',(#63672),#63683,.T.); +#63672 = FACE_BOUND('',#63673,.T.); +#63673 = EDGE_LOOP('',(#63674,#63675,#63681,#63682)); +#63674 = ORIENTED_EDGE('',*,*,#63102,.F.); +#63675 = ORIENTED_EDGE('',*,*,#63676,.T.); +#63676 = EDGE_CURVE('',#63103,#63021,#63677,.T.); +#63677 = LINE('',#63678,#63679); +#63678 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63679 = VECTOR('',#63680,1.); +#63680 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63681 = ORIENTED_EDGE('',*,*,#63029,.T.); +#63682 = ORIENTED_EDGE('',*,*,#63635,.F.); +#63683 = PLANE('',#63684); +#63684 = AXIS2_PLACEMENT_3D('',#63685,#63686,#63687); +#63685 = CARTESIAN_POINT('',(-0.7,1.85,0.45)); +#63686 = DIRECTION('',(1.,-5.E-16,2.2E-16)); +#63687 = DIRECTION('',(2.2E-16,-9.4E-16,-1.)); +#63688 = ADVANCED_FACE('',(#63689),#63700,.F.); +#63689 = FACE_BOUND('',#63690,.F.); +#63690 = EDGE_LOOP('',(#63691,#63692,#63693,#63694)); +#63691 = ORIENTED_EDGE('',*,*,#63110,.F.); +#63692 = ORIENTED_EDGE('',*,*,#63676,.T.); +#63693 = ORIENTED_EDGE('',*,*,#63020,.T.); +#63694 = ORIENTED_EDGE('',*,*,#63695,.F.); +#63695 = EDGE_CURVE('',#63111,#63013,#63696,.T.); +#63696 = LINE('',#63697,#63698); +#63697 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63698 = VECTOR('',#63699,1.); +#63699 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63700 = CYLINDRICAL_SURFACE('',#63701,0.15); +#63701 = AXIS2_PLACEMENT_3D('',#63702,#63703,#63704); +#63702 = CARTESIAN_POINT('',(-0.55,1.85,0.45)); +#63703 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63704 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63705 = ADVANCED_FACE('',(#63706),#63717,.F.); +#63706 = FACE_BOUND('',#63707,.F.); +#63707 = EDGE_LOOP('',(#63708,#63709,#63710,#63711)); +#63708 = ORIENTED_EDGE('',*,*,#63119,.F.); +#63709 = ORIENTED_EDGE('',*,*,#63695,.T.); +#63710 = ORIENTED_EDGE('',*,*,#63012,.T.); +#63711 = ORIENTED_EDGE('',*,*,#63712,.F.); +#63712 = EDGE_CURVE('',#63120,#63004,#63713,.T.); +#63713 = LINE('',#63714,#63715); +#63714 = CARTESIAN_POINT('',(0.55,1.85,0.6)); +#63715 = VECTOR('',#63716,1.); +#63716 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63717 = PLANE('',#63718); +#63718 = AXIS2_PLACEMENT_3D('',#63719,#63720,#63721); +#63719 = CARTESIAN_POINT('',(-0.55,1.85,0.6)); +#63720 = DIRECTION('',(0.,1.17E-15,1.)); +#63721 = DIRECTION('',(1.,-6.7E-16,7.839E-31)); +#63722 = ADVANCED_FACE('',(#63723),#63734,.F.); +#63723 = FACE_BOUND('',#63724,.F.); +#63724 = EDGE_LOOP('',(#63725,#63726,#63727,#63728)); +#63725 = ORIENTED_EDGE('',*,*,#63127,.F.); +#63726 = ORIENTED_EDGE('',*,*,#63712,.T.); +#63727 = ORIENTED_EDGE('',*,*,#63003,.T.); +#63728 = ORIENTED_EDGE('',*,*,#63729,.F.); +#63729 = EDGE_CURVE('',#63128,#62996,#63730,.T.); +#63730 = LINE('',#63731,#63732); +#63731 = CARTESIAN_POINT('',(0.7,1.85,0.45)); +#63732 = VECTOR('',#63733,1.); +#63733 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63734 = CYLINDRICAL_SURFACE('',#63735,0.15); +#63735 = AXIS2_PLACEMENT_3D('',#63736,#63737,#63738); +#63736 = CARTESIAN_POINT('',(0.55,1.85,0.45)); +#63737 = DIRECTION('',(6.7E-16,1.,-9.4E-16)); +#63738 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63739 = ADVANCED_FACE('',(#63740),#63758,.T.); +#63740 = FACE_BOUND('',#63741,.T.); +#63741 = EDGE_LOOP('',(#63742,#63750,#63756,#63757)); +#63742 = ORIENTED_EDGE('',*,*,#63743,.F.); +#63743 = EDGE_CURVE('',#63744,#62971,#63746,.T.); +#63744 = VERTEX_POINT('',#63745); +#63745 = CARTESIAN_POINT('',(2.725,1.73,0.1)); +#63746 = LINE('',#63747,#63748); +#63747 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#63748 = VECTOR('',#63749,1.); +#63749 = DIRECTION('',(-1.,4.4E-16,-3.9E-16)); +#63750 = ORIENTED_EDGE('',*,*,#63751,.T.); +#63751 = EDGE_CURVE('',#63744,#63053,#63752,.T.); +#63752 = LINE('',#63753,#63754); +#63753 = CARTESIAN_POINT('',(2.725,1.73,0.1)); +#63754 = VECTOR('',#63755,1.); +#63755 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63756 = ORIENTED_EDGE('',*,*,#63052,.T.); +#63757 = ORIENTED_EDGE('',*,*,#62970,.T.); +#63758 = PLANE('',#63759); +#63759 = AXIS2_PLACEMENT_3D('',#63760,#63761,#63762); +#63760 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#63761 = DIRECTION('',(-4.4E-16,-1.,-0.)); +#63762 = DIRECTION('',(-6.7E-16,2.948E-31,1.)); +#63763 = ADVANCED_FACE('',(#63764),#63775,.T.); +#63764 = FACE_BOUND('',#63765,.T.); +#63765 = EDGE_LOOP('',(#63766,#63767,#63773,#63774)); +#63766 = ORIENTED_EDGE('',*,*,#63136,.F.); +#63767 = ORIENTED_EDGE('',*,*,#63768,.T.); +#63768 = EDGE_CURVE('',#63137,#62987,#63769,.T.); +#63769 = LINE('',#63770,#63771); +#63770 = CARTESIAN_POINT('',(0.7,1.85,0.25)); +#63771 = VECTOR('',#63772,1.); +#63772 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63773 = ORIENTED_EDGE('',*,*,#62995,.T.); +#63774 = ORIENTED_EDGE('',*,*,#63729,.F.); +#63775 = PLANE('',#63776); +#63776 = AXIS2_PLACEMENT_3D('',#63777,#63778,#63779); +#63777 = CARTESIAN_POINT('',(0.7,1.85,0.1)); +#63778 = DIRECTION('',(-1.,5.E-16,-2.2E-16)); +#63779 = DIRECTION('',(-2.2E-16,9.4E-16,1.)); +#63780 = ADVANCED_FACE('',(#63781),#63797,.F.); +#63781 = FACE_BOUND('',#63782,.F.); +#63782 = EDGE_LOOP('',(#63783,#63784,#63790,#63791)); +#63783 = ORIENTED_EDGE('',*,*,#63153,.F.); +#63784 = ORIENTED_EDGE('',*,*,#63785,.T.); +#63785 = EDGE_CURVE('',#63145,#62979,#63786,.T.); +#63786 = LINE('',#63787,#63788); +#63787 = CARTESIAN_POINT('',(0.85,1.85,0.1)); +#63788 = VECTOR('',#63789,1.); +#63789 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63790 = ORIENTED_EDGE('',*,*,#62978,.T.); +#63791 = ORIENTED_EDGE('',*,*,#63792,.T.); +#63792 = EDGE_CURVE('',#62971,#63154,#63793,.T.); +#63793 = LINE('',#63794,#63795); +#63794 = CARTESIAN_POINT('',(2.675,1.73,0.1)); +#63795 = VECTOR('',#63796,1.); +#63796 = DIRECTION('',(0.,1.,0.)); +#63797 = PLANE('',#63798); +#63798 = AXIS2_PLACEMENT_3D('',#63799,#63800,#63801); +#63799 = CARTESIAN_POINT('',(-2.675,1.73,0.1)); +#63800 = DIRECTION('',(-2.8E-16,4.4E-16,1.)); +#63801 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#63802 = ADVANCED_FACE('',(#63803),#63809,.T.); +#63803 = FACE_BOUND('',#63804,.T.); +#63804 = EDGE_LOOP('',(#63805,#63806,#63807,#63808)); +#63805 = ORIENTED_EDGE('',*,*,#63785,.T.); +#63806 = ORIENTED_EDGE('',*,*,#62986,.T.); +#63807 = ORIENTED_EDGE('',*,*,#63768,.F.); +#63808 = ORIENTED_EDGE('',*,*,#63144,.F.); +#63809 = CYLINDRICAL_SURFACE('',#63810,0.15); +#63810 = AXIS2_PLACEMENT_3D('',#63811,#63812,#63813); +#63811 = CARTESIAN_POINT('',(0.85,1.85,0.25)); +#63812 = DIRECTION('',(-5.E-16,-1.,1.17E-15)); +#63813 = DIRECTION('',(2.8E-16,-1.17E-15,-1.)); +#63814 = ADVANCED_FACE('',(#63815),#63842,.F.); +#63815 = FACE_BOUND('',#63816,.F.); +#63816 = EDGE_LOOP('',(#63817,#63826,#63827,#63836)); +#63817 = ORIENTED_EDGE('',*,*,#63818,.T.); +#63818 = EDGE_CURVE('',#63819,#63053,#63821,.T.); +#63819 = VERTEX_POINT('',#63820); +#63820 = CARTESIAN_POINT('',(2.775,1.68,0.66)); +#63821 = CIRCLE('',#63822,5.E-02); +#63822 = AXIS2_PLACEMENT_3D('',#63823,#63824,#63825); +#63823 = CARTESIAN_POINT('',(2.725,1.68,0.66)); +#63824 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63825 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#63826 = ORIENTED_EDGE('',*,*,#63060,.T.); +#63827 = ORIENTED_EDGE('',*,*,#63828,.F.); +#63828 = EDGE_CURVE('',#63829,#63061,#63831,.T.); +#63829 = VERTEX_POINT('',#63830); +#63830 = CARTESIAN_POINT('',(2.895,1.68,0.66)); +#63831 = CIRCLE('',#63832,0.17); +#63832 = AXIS2_PLACEMENT_3D('',#63833,#63834,#63835); +#63833 = CARTESIAN_POINT('',(2.725,1.68,0.66)); +#63834 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63835 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#63836 = ORIENTED_EDGE('',*,*,#63837,.F.); +#63837 = EDGE_CURVE('',#63819,#63829,#63838,.T.); +#63838 = LINE('',#63839,#63840); +#63839 = CARTESIAN_POINT('',(2.775,1.68,0.66)); +#63840 = VECTOR('',#63841,1.); +#63841 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#63842 = PLANE('',#63843); +#63843 = AXIS2_PLACEMENT_3D('',#63844,#63845,#63846); +#63844 = CARTESIAN_POINT('',(2.802781745931,1.757781745931,0.66)); +#63845 = DIRECTION('',(4.E-17,-8.3E-16,-1.)); +#63846 = DIRECTION('',(-0.707106781187,0.707106781187, + -6.151828996323E-16)); +#63847 = ADVANCED_FACE('',(#63848),#63866,.T.); +#63848 = FACE_BOUND('',#63849,.T.); +#63849 = EDGE_LOOP('',(#63850,#63851,#63859,#63865)); +#63850 = ORIENTED_EDGE('',*,*,#63068,.F.); +#63851 = ORIENTED_EDGE('',*,*,#63852,.F.); +#63852 = EDGE_CURVE('',#63853,#63061,#63855,.T.); +#63853 = VERTEX_POINT('',#63854); +#63854 = CARTESIAN_POINT('',(2.725,1.85,0.1)); +#63855 = LINE('',#63856,#63857); +#63856 = CARTESIAN_POINT('',(2.725,1.85,0.66)); +#63857 = VECTOR('',#63858,1.); +#63858 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63859 = ORIENTED_EDGE('',*,*,#63860,.T.); +#63860 = EDGE_CURVE('',#63853,#63154,#63861,.T.); +#63861 = LINE('',#63862,#63863); +#63862 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63863 = VECTOR('',#63864,1.); +#63864 = DIRECTION('',(-1.,4.4E-16,-6.7E-16)); +#63865 = ORIENTED_EDGE('',*,*,#63161,.T.); +#63866 = PLANE('',#63867); +#63867 = AXIS2_PLACEMENT_3D('',#63868,#63869,#63870); +#63868 = CARTESIAN_POINT('',(2.675,1.85,0.66)); +#63869 = DIRECTION('',(4.4E-16,1.,0.)); +#63870 = DIRECTION('',(6.7E-16,-2.948E-31,-1.)); +#63871 = ADVANCED_FACE('',(#63872),#63890,.T.); +#63872 = FACE_BOUND('',#63873,.F.); +#63873 = EDGE_LOOP('',(#63874,#63875,#63883,#63889)); +#63874 = ORIENTED_EDGE('',*,*,#63212,.F.); +#63875 = ORIENTED_EDGE('',*,*,#63876,.F.); +#63876 = EDGE_CURVE('',#63877,#63205,#63879,.T.); +#63877 = VERTEX_POINT('',#63878); +#63878 = CARTESIAN_POINT('',(-2.725,1.85,0.1)); +#63879 = LINE('',#63880,#63881); +#63880 = CARTESIAN_POINT('',(-2.725,1.85,0.66)); +#63881 = VECTOR('',#63882,1.); +#63882 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#63883 = ORIENTED_EDGE('',*,*,#63884,.T.); +#63884 = EDGE_CURVE('',#63877,#63084,#63885,.T.); +#63885 = LINE('',#63886,#63887); +#63886 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63887 = VECTOR('',#63888,1.); +#63888 = DIRECTION('',(1.,-6.7E-16,0.)); +#63889 = ORIENTED_EDGE('',*,*,#63170,.T.); +#63890 = PLANE('',#63891); +#63891 = AXIS2_PLACEMENT_3D('',#63892,#63893,#63894); +#63892 = CARTESIAN_POINT('',(-2.675,1.85,0.66)); +#63893 = DIRECTION('',(6.7E-16,1.,-2.2E-16)); +#63894 = DIRECTION('',(0.,2.2E-16,1.)); +#63895 = ADVANCED_FACE('',(#63896),#63923,.F.); +#63896 = FACE_BOUND('',#63897,.T.); +#63897 = EDGE_LOOP('',(#63898,#63907,#63908,#63917)); +#63898 = ORIENTED_EDGE('',*,*,#63899,.T.); +#63899 = EDGE_CURVE('',#63900,#63197,#63902,.T.); +#63900 = VERTEX_POINT('',#63901); +#63901 = CARTESIAN_POINT('',(-2.775,1.68,0.66)); +#63902 = CIRCLE('',#63903,5.E-02); +#63903 = AXIS2_PLACEMENT_3D('',#63904,#63905,#63906); +#63904 = CARTESIAN_POINT('',(-2.725,1.68,0.66)); +#63905 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#63906 = DIRECTION('',(1.11E-15,1.,-1.05E-15)); +#63907 = ORIENTED_EDGE('',*,*,#63204,.T.); +#63908 = ORIENTED_EDGE('',*,*,#63909,.F.); +#63909 = EDGE_CURVE('',#63910,#63205,#63912,.T.); +#63910 = VERTEX_POINT('',#63911); +#63911 = CARTESIAN_POINT('',(-2.895,1.68,0.66)); +#63912 = CIRCLE('',#63913,0.17); +#63913 = AXIS2_PLACEMENT_3D('',#63914,#63915,#63916); +#63914 = CARTESIAN_POINT('',(-2.725,1.68,0.66)); +#63915 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#63916 = DIRECTION('',(1.11E-15,1.,-1.05E-15)); +#63917 = ORIENTED_EDGE('',*,*,#63918,.F.); +#63918 = EDGE_CURVE('',#63900,#63910,#63919,.T.); +#63919 = LINE('',#63920,#63921); +#63920 = CARTESIAN_POINT('',(-2.775,1.68,0.66)); +#63921 = VECTOR('',#63922,1.); +#63922 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#63923 = PLANE('',#63924); +#63924 = AXIS2_PLACEMENT_3D('',#63925,#63926,#63927); +#63925 = CARTESIAN_POINT('',(-2.802781745931,1.757781745931,0.66)); +#63926 = DIRECTION('',(6.2E-16,-6.1E-16,-1.)); +#63927 = DIRECTION('',(-0.707106781187,-0.707106781187, + -7.071067811865E-18)); +#63928 = ADVANCED_FACE('',(#63929),#63940,.T.); +#63929 = FACE_BOUND('',#63930,.F.); +#63930 = EDGE_LOOP('',(#63931,#63932,#63938,#63939)); +#63931 = ORIENTED_EDGE('',*,*,#63884,.F.); +#63932 = ORIENTED_EDGE('',*,*,#63933,.T.); +#63933 = EDGE_CURVE('',#63877,#63652,#63934,.T.); +#63934 = LINE('',#63935,#63936); +#63935 = CARTESIAN_POINT('',(-2.725,1.85,0.1)); +#63936 = VECTOR('',#63937,1.); +#63937 = DIRECTION('',(-6.7E-16,-1.,1.14E-15)); +#63938 = ORIENTED_EDGE('',*,*,#63651,.T.); +#63939 = ORIENTED_EDGE('',*,*,#63613,.T.); +#63940 = PLANE('',#63941); +#63941 = AXIS2_PLACEMENT_3D('',#63942,#63943,#63944); +#63942 = CARTESIAN_POINT('',(-2.675,1.85,0.1)); +#63943 = DIRECTION('',(2.8E-16,-6.9E-16,-1.)); +#63944 = DIRECTION('',(6.7E-16,1.,-6.9E-16)); +#63945 = ADVANCED_FACE('',(#63946),#63965,.F.); +#63946 = FACE_BOUND('',#63947,.F.); +#63947 = EDGE_LOOP('',(#63948,#63956,#63957,#63958)); +#63948 = ORIENTED_EDGE('',*,*,#63949,.T.); +#63949 = EDGE_CURVE('',#63950,#63900,#63952,.T.); +#63950 = VERTEX_POINT('',#63951); +#63951 = CARTESIAN_POINT('',(-2.775,1.68,0.1)); +#63952 = LINE('',#63953,#63954); +#63953 = CARTESIAN_POINT('',(-2.775,1.68,0.1)); +#63954 = VECTOR('',#63955,1.); +#63955 = DIRECTION('',(5.E-16,8.3E-16,1.)); +#63956 = ORIENTED_EDGE('',*,*,#63899,.T.); +#63957 = ORIENTED_EDGE('',*,*,#63659,.F.); +#63958 = ORIENTED_EDGE('',*,*,#63959,.F.); +#63959 = EDGE_CURVE('',#63950,#63652,#63960,.T.); +#63960 = CIRCLE('',#63961,5.E-02); +#63961 = AXIS2_PLACEMENT_3D('',#63962,#63963,#63964); +#63962 = CARTESIAN_POINT('',(-2.725,1.68,0.1)); +#63963 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#63964 = DIRECTION('',(-7.77E-15,1.,-1.05E-15)); +#63965 = CYLINDRICAL_SURFACE('',#63966,5.E-02); +#63966 = AXIS2_PLACEMENT_3D('',#63967,#63968,#63969); +#63967 = CARTESIAN_POINT('',(-2.725,1.68,0.1)); +#63968 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#63969 = DIRECTION('',(-7.77E-15,1.,-6.1E-16)); +#63970 = ADVANCED_FACE('',(#63971),#63982,.T.); +#63971 = FACE_BOUND('',#63972,.T.); +#63972 = EDGE_LOOP('',(#63973,#63974,#63980,#63981)); +#63973 = ORIENTED_EDGE('',*,*,#63860,.F.); +#63974 = ORIENTED_EDGE('',*,*,#63975,.T.); +#63975 = EDGE_CURVE('',#63853,#63744,#63976,.T.); +#63976 = LINE('',#63977,#63978); +#63977 = CARTESIAN_POINT('',(2.725,1.85,0.1)); +#63978 = VECTOR('',#63979,1.); +#63979 = DIRECTION('',(-4.4E-16,-1.,9.2E-16)); +#63980 = ORIENTED_EDGE('',*,*,#63743,.T.); +#63981 = ORIENTED_EDGE('',*,*,#63792,.T.); +#63982 = PLANE('',#63983); +#63983 = AXIS2_PLACEMENT_3D('',#63984,#63985,#63986); +#63984 = CARTESIAN_POINT('',(2.675,1.85,0.1)); +#63985 = DIRECTION('',(3.9E-16,-9.2E-16,-1.)); +#63986 = DIRECTION('',(-4.4E-16,-1.,9.2E-16)); +#63987 = ADVANCED_FACE('',(#63988),#64007,.F.); +#63988 = FACE_BOUND('',#63989,.F.); +#63989 = EDGE_LOOP('',(#63990,#63999,#64000,#64001)); +#63990 = ORIENTED_EDGE('',*,*,#63991,.T.); +#63991 = EDGE_CURVE('',#63992,#63744,#63994,.T.); +#63992 = VERTEX_POINT('',#63993); +#63993 = CARTESIAN_POINT('',(2.775,1.68,0.1)); +#63994 = CIRCLE('',#63995,5.E-02); +#63995 = AXIS2_PLACEMENT_3D('',#63996,#63997,#63998); +#63996 = CARTESIAN_POINT('',(2.725,1.68,0.1)); +#63997 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#63998 = DIRECTION('',(8.88E-15,1.,-8.3E-16)); +#63999 = ORIENTED_EDGE('',*,*,#63751,.T.); +#64000 = ORIENTED_EDGE('',*,*,#63818,.F.); +#64001 = ORIENTED_EDGE('',*,*,#64002,.F.); +#64002 = EDGE_CURVE('',#63992,#63819,#64003,.T.); +#64003 = LINE('',#64004,#64005); +#64004 = CARTESIAN_POINT('',(2.775,1.68,0.1)); +#64005 = VECTOR('',#64006,1.); +#64006 = DIRECTION('',(-1.17E-15,1.05E-15,1.)); +#64007 = CYLINDRICAL_SURFACE('',#64008,5.E-02); +#64008 = AXIS2_PLACEMENT_3D('',#64009,#64010,#64011); +#64009 = CARTESIAN_POINT('',(2.725,1.68,0.1)); +#64010 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64011 = DIRECTION('',(8.88E-15,1.,-8.3E-16)); +#64012 = ADVANCED_FACE('',(#64013),#64038,.T.); +#64013 = FACE_BOUND('',#64014,.T.); +#64014 = EDGE_LOOP('',(#64015,#64023,#64031,#64037)); +#64015 = ORIENTED_EDGE('',*,*,#64016,.F.); +#64016 = EDGE_CURVE('',#64017,#63819,#64019,.T.); +#64017 = VERTEX_POINT('',#64018); +#64018 = CARTESIAN_POINT('',(2.775,1.01,0.66)); +#64019 = LINE('',#64020,#64021); +#64020 = CARTESIAN_POINT('',(2.775,0.87,0.66)); +#64021 = VECTOR('',#64022,1.); +#64022 = DIRECTION('',(2.16E-15,1.,-7.8E-16)); +#64023 = ORIENTED_EDGE('',*,*,#64024,.T.); +#64024 = EDGE_CURVE('',#64017,#64025,#64027,.T.); +#64025 = VERTEX_POINT('',#64026); +#64026 = CARTESIAN_POINT('',(2.895,1.01,0.66)); +#64027 = LINE('',#64028,#64029); +#64028 = CARTESIAN_POINT('',(2.775,1.01,0.66)); +#64029 = VECTOR('',#64030,1.); +#64030 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64031 = ORIENTED_EDGE('',*,*,#64032,.T.); +#64032 = EDGE_CURVE('',#64025,#63829,#64033,.T.); +#64033 = LINE('',#64034,#64035); +#64034 = CARTESIAN_POINT('',(2.895,0.87,0.66)); +#64035 = VECTOR('',#64036,1.); +#64036 = DIRECTION('',(2.16E-15,1.,-7.8E-16)); +#64037 = ORIENTED_EDGE('',*,*,#63837,.F.); +#64038 = PLANE('',#64039); +#64039 = AXIS2_PLACEMENT_3D('',#64040,#64041,#64042); +#64040 = CARTESIAN_POINT('',(2.775,0.87,0.66)); +#64041 = DIRECTION('',(-9.4E-16,7.8E-16,1.)); +#64042 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64043 = ADVANCED_FACE('',(#64044),#64063,.T.); +#64044 = FACE_BOUND('',#64045,.T.); +#64045 = EDGE_LOOP('',(#64046,#64047,#64055,#64062)); +#64046 = ORIENTED_EDGE('',*,*,#63828,.F.); +#64047 = ORIENTED_EDGE('',*,*,#64048,.T.); +#64048 = EDGE_CURVE('',#63829,#64049,#64051,.T.); +#64049 = VERTEX_POINT('',#64050); +#64050 = CARTESIAN_POINT('',(2.895,1.68,0.1)); +#64051 = LINE('',#64052,#64053); +#64052 = CARTESIAN_POINT('',(2.895,1.68,0.66)); +#64053 = VECTOR('',#64054,1.); +#64054 = DIRECTION('',(1.17E-15,-1.05E-15,-1.)); +#64055 = ORIENTED_EDGE('',*,*,#64056,.T.); +#64056 = EDGE_CURVE('',#64049,#63853,#64057,.T.); +#64057 = CIRCLE('',#64058,0.17); +#64058 = AXIS2_PLACEMENT_3D('',#64059,#64060,#64061); +#64059 = CARTESIAN_POINT('',(2.725,1.68,0.1)); +#64060 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64061 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#64062 = ORIENTED_EDGE('',*,*,#63852,.T.); +#64063 = CYLINDRICAL_SURFACE('',#64064,0.17); +#64064 = AXIS2_PLACEMENT_3D('',#64065,#64066,#64067); +#64065 = CARTESIAN_POINT('',(2.725,1.68,0.66)); +#64066 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64067 = DIRECTION('',(2.089145037156E-48,1.,-8.3E-16)); +#64068 = ADVANCED_FACE('',(#64069),#64088,.T.); +#64069 = FACE_BOUND('',#64070,.T.); +#64070 = EDGE_LOOP('',(#64071,#64072,#64081,#64087)); +#64071 = ORIENTED_EDGE('',*,*,#63876,.F.); +#64072 = ORIENTED_EDGE('',*,*,#64073,.F.); +#64073 = EDGE_CURVE('',#64074,#63877,#64076,.T.); +#64074 = VERTEX_POINT('',#64075); +#64075 = CARTESIAN_POINT('',(-2.895,1.68,0.1)); +#64076 = CIRCLE('',#64077,0.17); +#64077 = AXIS2_PLACEMENT_3D('',#64078,#64079,#64080); +#64078 = CARTESIAN_POINT('',(-2.725,1.68,0.1)); +#64079 = DIRECTION('',(6.2E-16,-1.05E-15,-1.)); +#64080 = DIRECTION('',(1.11E-15,1.,-1.05E-15)); +#64081 = ORIENTED_EDGE('',*,*,#64082,.F.); +#64082 = EDGE_CURVE('',#63910,#64074,#64083,.T.); +#64083 = LINE('',#64084,#64085); +#64084 = CARTESIAN_POINT('',(-2.895,1.68,0.66)); +#64085 = VECTOR('',#64086,1.); +#64086 = DIRECTION('',(-5.E-16,-8.3E-16,-1.)); +#64087 = ORIENTED_EDGE('',*,*,#63909,.T.); +#64088 = CYLINDRICAL_SURFACE('',#64089,0.17); +#64089 = AXIS2_PLACEMENT_3D('',#64090,#64091,#64092); +#64090 = CARTESIAN_POINT('',(-2.725,1.68,0.66)); +#64091 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#64092 = DIRECTION('',(1.11E-15,1.,-6.1E-16)); +#64093 = ADVANCED_FACE('',(#64094),#64119,.T.); +#64094 = FACE_BOUND('',#64095,.F.); +#64095 = EDGE_LOOP('',(#64096,#64104,#64112,#64118)); +#64096 = ORIENTED_EDGE('',*,*,#64097,.F.); +#64097 = EDGE_CURVE('',#64098,#63900,#64100,.T.); +#64098 = VERTEX_POINT('',#64099); +#64099 = CARTESIAN_POINT('',(-2.775,1.01,0.66)); +#64100 = LINE('',#64101,#64102); +#64101 = CARTESIAN_POINT('',(-2.775,0.87,0.66)); +#64102 = VECTOR('',#64103,1.); +#64103 = DIRECTION('',(-1.05E-15,1.,-1.E-15)); +#64104 = ORIENTED_EDGE('',*,*,#64105,.T.); +#64105 = EDGE_CURVE('',#64098,#64106,#64108,.T.); +#64106 = VERTEX_POINT('',#64107); +#64107 = CARTESIAN_POINT('',(-2.895,1.01,0.66)); +#64108 = LINE('',#64109,#64110); +#64109 = CARTESIAN_POINT('',(-2.775,1.01,0.66)); +#64110 = VECTOR('',#64111,1.); +#64111 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#64112 = ORIENTED_EDGE('',*,*,#64113,.T.); +#64113 = EDGE_CURVE('',#64106,#63910,#64114,.T.); +#64114 = LINE('',#64115,#64116); +#64115 = CARTESIAN_POINT('',(-2.895,0.87,0.66)); +#64116 = VECTOR('',#64117,1.); +#64117 = DIRECTION('',(-1.05E-15,1.,-1.E-15)); +#64118 = ORIENTED_EDGE('',*,*,#63918,.F.); +#64119 = PLANE('',#64120); +#64120 = AXIS2_PLACEMENT_3D('',#64121,#64122,#64123); +#64121 = CARTESIAN_POINT('',(-2.775,0.87,0.66)); +#64122 = DIRECTION('',(2.8E-16,5.6E-16,1.)); +#64123 = DIRECTION('',(1.,1.05E-15,-2.8E-16)); +#64124 = ADVANCED_FACE('',(#64125),#64136,.F.); +#64125 = FACE_BOUND('',#64126,.T.); +#64126 = EDGE_LOOP('',(#64127,#64128,#64129,#64130)); +#64127 = ORIENTED_EDGE('',*,*,#64073,.T.); +#64128 = ORIENTED_EDGE('',*,*,#63933,.T.); +#64129 = ORIENTED_EDGE('',*,*,#63959,.F.); +#64130 = ORIENTED_EDGE('',*,*,#64131,.F.); +#64131 = EDGE_CURVE('',#64074,#63950,#64132,.T.); +#64132 = LINE('',#64133,#64134); +#64133 = CARTESIAN_POINT('',(-2.895,1.68,0.1)); +#64134 = VECTOR('',#64135,1.); +#64135 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64136 = PLANE('',#64137); +#64137 = AXIS2_PLACEMENT_3D('',#64138,#64139,#64140); +#64138 = CARTESIAN_POINT('',(-2.802781745931,1.757781745931,0.1)); +#64139 = DIRECTION('',(-6.2E-16,6.1E-16,1.)); +#64140 = DIRECTION('',(-0.707106781187,-0.707106781187, + -7.071067811865E-18)); +#64141 = ADVANCED_FACE('',(#64142),#64178,.T.); +#64142 = FACE_BOUND('',#64143,.F.); +#64143 = EDGE_LOOP('',(#64144,#64152,#64161,#64169,#64176,#64177)); +#64144 = ORIENTED_EDGE('',*,*,#64145,.F.); +#64145 = EDGE_CURVE('',#64146,#63950,#64148,.T.); +#64146 = VERTEX_POINT('',#64147); +#64147 = CARTESIAN_POINT('',(-2.775,1.01,0.1)); +#64148 = LINE('',#64149,#64150); +#64149 = CARTESIAN_POINT('',(-2.775,0.87,0.1)); +#64150 = VECTOR('',#64151,1.); +#64151 = DIRECTION('',(-1.05E-15,1.,-1.E-15)); +#64152 = ORIENTED_EDGE('',*,*,#64153,.T.); +#64153 = EDGE_CURVE('',#64146,#64154,#64156,.T.); +#64154 = VERTEX_POINT('',#64155); +#64155 = CARTESIAN_POINT('',(-2.775,0.87,0.24)); +#64156 = CIRCLE('',#64157,0.14); +#64157 = AXIS2_PLACEMENT_3D('',#64158,#64159,#64160); +#64158 = CARTESIAN_POINT('',(-2.775,1.01,0.24)); +#64159 = DIRECTION('',(-1.,-1.05E-15,-4.2E-16)); +#64160 = DIRECTION('',(-1.05E-15,1.,-2.2E-16)); +#64161 = ORIENTED_EDGE('',*,*,#64162,.T.); +#64162 = EDGE_CURVE('',#64154,#64163,#64165,.T.); +#64163 = VERTEX_POINT('',#64164); +#64164 = CARTESIAN_POINT('',(-2.775,0.87,0.52)); +#64165 = LINE('',#64166,#64167); +#64166 = CARTESIAN_POINT('',(-2.775,0.87,0.1)); +#64167 = VECTOR('',#64168,1.); +#64168 = DIRECTION('',(5.E-16,8.3E-16,1.)); +#64169 = ORIENTED_EDGE('',*,*,#64170,.F.); +#64170 = EDGE_CURVE('',#64098,#64163,#64171,.T.); +#64171 = CIRCLE('',#64172,0.14); +#64172 = AXIS2_PLACEMENT_3D('',#64173,#64174,#64175); +#64173 = CARTESIAN_POINT('',(-2.775,1.01,0.52)); +#64174 = DIRECTION('',(1.,1.05E-15,-2.8E-16)); +#64175 = DIRECTION('',(1.05E-15,-1.,2.2E-16)); +#64176 = ORIENTED_EDGE('',*,*,#64097,.T.); +#64177 = ORIENTED_EDGE('',*,*,#63949,.F.); +#64178 = PLANE('',#64179); +#64179 = AXIS2_PLACEMENT_3D('',#64180,#64181,#64182); +#64180 = CARTESIAN_POINT('',(-2.775,0.87,0.1)); +#64181 = DIRECTION('',(1.,-6.7E-16,-5.E-16)); +#64182 = DIRECTION('',(-5.E-16,-8.3E-16,-1.)); +#64183 = ADVANCED_FACE('',(#64184),#64195,.F.); +#64184 = FACE_BOUND('',#64185,.F.); +#64185 = EDGE_LOOP('',(#64186,#64187,#64188,#64189)); +#64186 = ORIENTED_EDGE('',*,*,#64056,.T.); +#64187 = ORIENTED_EDGE('',*,*,#63975,.T.); +#64188 = ORIENTED_EDGE('',*,*,#63991,.F.); +#64189 = ORIENTED_EDGE('',*,*,#64190,.F.); +#64190 = EDGE_CURVE('',#64049,#63992,#64191,.T.); +#64191 = LINE('',#64192,#64193); +#64192 = CARTESIAN_POINT('',(2.895,1.68,0.1)); +#64193 = VECTOR('',#64194,1.); +#64194 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64195 = PLANE('',#64196); +#64196 = AXIS2_PLACEMENT_3D('',#64197,#64198,#64199); +#64197 = CARTESIAN_POINT('',(2.802781745931,1.757781745931,0.1)); +#64198 = DIRECTION('',(-4.E-17,8.3E-16,1.)); +#64199 = DIRECTION('',(-0.707106781187,0.707106781187, + -6.151828996323E-16)); +#64200 = ADVANCED_FACE('',(#64201),#64237,.T.); +#64201 = FACE_BOUND('',#64202,.T.); +#64202 = EDGE_LOOP('',(#64203,#64211,#64220,#64228,#64235,#64236)); +#64203 = ORIENTED_EDGE('',*,*,#64204,.F.); +#64204 = EDGE_CURVE('',#64205,#63992,#64207,.T.); +#64205 = VERTEX_POINT('',#64206); +#64206 = CARTESIAN_POINT('',(2.775,1.01,0.1)); +#64207 = LINE('',#64208,#64209); +#64208 = CARTESIAN_POINT('',(2.775,0.87,0.1)); +#64209 = VECTOR('',#64210,1.); +#64210 = DIRECTION('',(2.16E-15,1.,-7.8E-16)); +#64211 = ORIENTED_EDGE('',*,*,#64212,.T.); +#64212 = EDGE_CURVE('',#64205,#64213,#64215,.T.); +#64213 = VERTEX_POINT('',#64214); +#64214 = CARTESIAN_POINT('',(2.775,0.87,0.24)); +#64215 = CIRCLE('',#64216,0.14); +#64216 = AXIS2_PLACEMENT_3D('',#64217,#64218,#64219); +#64217 = CARTESIAN_POINT('',(2.775,1.01,0.24)); +#64218 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64219 = DIRECTION('',(2.16E-15,1.,0.)); +#64220 = ORIENTED_EDGE('',*,*,#64221,.T.); +#64221 = EDGE_CURVE('',#64213,#64222,#64224,.T.); +#64222 = VERTEX_POINT('',#64223); +#64223 = CARTESIAN_POINT('',(2.775,0.87,0.52)); +#64224 = LINE('',#64225,#64226); +#64225 = CARTESIAN_POINT('',(2.775,0.87,0.1)); +#64226 = VECTOR('',#64227,1.); +#64227 = DIRECTION('',(-1.17E-15,1.05E-15,1.)); +#64228 = ORIENTED_EDGE('',*,*,#64229,.F.); +#64229 = EDGE_CURVE('',#64017,#64222,#64230,.T.); +#64230 = CIRCLE('',#64231,0.14); +#64231 = AXIS2_PLACEMENT_3D('',#64232,#64233,#64234); +#64232 = CARTESIAN_POINT('',(2.775,1.01,0.52)); +#64233 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64234 = DIRECTION('',(-2.16E-15,-1.,0.)); +#64235 = ORIENTED_EDGE('',*,*,#64016,.T.); +#64236 = ORIENTED_EDGE('',*,*,#64002,.F.); +#64237 = PLANE('',#64238); +#64238 = AXIS2_PLACEMENT_3D('',#64239,#64240,#64241); +#64239 = CARTESIAN_POINT('',(2.775,0.87,0.1)); +#64240 = DIRECTION('',(-1.,4.4E-16,-1.17E-15)); +#64241 = DIRECTION('',(-1.17E-15,1.05E-15,1.)); +#64242 = ADVANCED_FACE('',(#64243),#64262,.T.); +#64243 = FACE_BOUND('',#64244,.T.); +#64244 = EDGE_LOOP('',(#64245,#64246,#64254,#64261)); +#64245 = ORIENTED_EDGE('',*,*,#64229,.T.); +#64246 = ORIENTED_EDGE('',*,*,#64247,.T.); +#64247 = EDGE_CURVE('',#64222,#64248,#64250,.T.); +#64248 = VERTEX_POINT('',#64249); +#64249 = CARTESIAN_POINT('',(2.895,0.87,0.52)); +#64250 = LINE('',#64251,#64252); +#64251 = CARTESIAN_POINT('',(2.775,0.87,0.52)); +#64252 = VECTOR('',#64253,1.); +#64253 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64254 = ORIENTED_EDGE('',*,*,#64255,.F.); +#64255 = EDGE_CURVE('',#64025,#64248,#64256,.T.); +#64256 = CIRCLE('',#64257,0.14); +#64257 = AXIS2_PLACEMENT_3D('',#64258,#64259,#64260); +#64258 = CARTESIAN_POINT('',(2.895,1.01,0.52)); +#64259 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64260 = DIRECTION('',(-2.16E-15,-1.,0.)); +#64261 = ORIENTED_EDGE('',*,*,#64024,.F.); +#64262 = CYLINDRICAL_SURFACE('',#64263,0.14); +#64263 = AXIS2_PLACEMENT_3D('',#64264,#64265,#64266); +#64264 = CARTESIAN_POINT('',(2.775,1.01,0.52)); +#64265 = DIRECTION('',(1.,-2.16E-15,9.4E-16)); +#64266 = DIRECTION('',(-9.4E-16,7.8E-16,1.)); +#64267 = ADVANCED_FACE('',(#64268),#64296,.T.); +#64268 = FACE_BOUND('',#64269,.T.); +#64269 = EDGE_LOOP('',(#64270,#64271,#64272,#64280,#64289,#64295)); +#64270 = ORIENTED_EDGE('',*,*,#64032,.F.); +#64271 = ORIENTED_EDGE('',*,*,#64255,.T.); +#64272 = ORIENTED_EDGE('',*,*,#64273,.T.); +#64273 = EDGE_CURVE('',#64248,#64274,#64276,.T.); +#64274 = VERTEX_POINT('',#64275); +#64275 = CARTESIAN_POINT('',(2.895,0.87,0.24)); +#64276 = LINE('',#64277,#64278); +#64277 = CARTESIAN_POINT('',(2.895,0.87,0.66)); +#64278 = VECTOR('',#64279,1.); +#64279 = DIRECTION('',(1.17E-15,-1.05E-15,-1.)); +#64280 = ORIENTED_EDGE('',*,*,#64281,.F.); +#64281 = EDGE_CURVE('',#64282,#64274,#64284,.T.); +#64282 = VERTEX_POINT('',#64283); +#64283 = CARTESIAN_POINT('',(2.895,1.01,0.1)); +#64284 = CIRCLE('',#64285,0.14); +#64285 = AXIS2_PLACEMENT_3D('',#64286,#64287,#64288); +#64286 = CARTESIAN_POINT('',(2.895,1.01,0.24)); +#64287 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64288 = DIRECTION('',(2.16E-15,1.,0.)); +#64289 = ORIENTED_EDGE('',*,*,#64290,.T.); +#64290 = EDGE_CURVE('',#64282,#64049,#64291,.T.); +#64291 = LINE('',#64292,#64293); +#64292 = CARTESIAN_POINT('',(2.895,0.87,0.1)); +#64293 = VECTOR('',#64294,1.); +#64294 = DIRECTION('',(4.4E-16,1.,-1.05E-15)); +#64295 = ORIENTED_EDGE('',*,*,#64048,.F.); +#64296 = PLANE('',#64297); +#64297 = AXIS2_PLACEMENT_3D('',#64298,#64299,#64300); +#64298 = CARTESIAN_POINT('',(2.895,0.87,0.66)); +#64299 = DIRECTION('',(1.,-4.4E-16,1.17E-15)); +#64300 = DIRECTION('',(1.17E-15,-1.05E-15,-1.)); +#64301 = ADVANCED_FACE('',(#64302),#64338,.T.); +#64302 = FACE_BOUND('',#64303,.F.); +#64303 = EDGE_LOOP('',(#64304,#64305,#64314,#64322,#64331,#64337)); +#64304 = ORIENTED_EDGE('',*,*,#64113,.F.); +#64305 = ORIENTED_EDGE('',*,*,#64306,.T.); +#64306 = EDGE_CURVE('',#64106,#64307,#64309,.T.); +#64307 = VERTEX_POINT('',#64308); +#64308 = CARTESIAN_POINT('',(-2.895,0.87,0.52)); +#64309 = CIRCLE('',#64310,0.14); +#64310 = AXIS2_PLACEMENT_3D('',#64311,#64312,#64313); +#64311 = CARTESIAN_POINT('',(-2.895,1.01,0.52)); +#64312 = DIRECTION('',(1.,1.05E-15,-2.8E-16)); +#64313 = DIRECTION('',(1.05E-15,-1.,2.2E-16)); +#64314 = ORIENTED_EDGE('',*,*,#64315,.T.); +#64315 = EDGE_CURVE('',#64307,#64316,#64318,.T.); +#64316 = VERTEX_POINT('',#64317); +#64317 = CARTESIAN_POINT('',(-2.895,0.87,0.24)); +#64318 = LINE('',#64319,#64320); +#64319 = CARTESIAN_POINT('',(-2.895,0.87,0.66)); +#64320 = VECTOR('',#64321,1.); +#64321 = DIRECTION('',(-5.E-16,-8.3E-16,-1.)); +#64322 = ORIENTED_EDGE('',*,*,#64323,.F.); +#64323 = EDGE_CURVE('',#64324,#64316,#64326,.T.); +#64324 = VERTEX_POINT('',#64325); +#64325 = CARTESIAN_POINT('',(-2.895,1.01,0.1)); +#64326 = CIRCLE('',#64327,0.14); +#64327 = AXIS2_PLACEMENT_3D('',#64328,#64329,#64330); +#64328 = CARTESIAN_POINT('',(-2.895,1.01,0.24)); +#64329 = DIRECTION('',(-1.,-1.05E-15,-4.2E-16)); +#64330 = DIRECTION('',(-1.05E-15,1.,-2.2E-16)); +#64331 = ORIENTED_EDGE('',*,*,#64332,.T.); +#64332 = EDGE_CURVE('',#64324,#64074,#64333,.T.); +#64333 = LINE('',#64334,#64335); +#64334 = CARTESIAN_POINT('',(-2.895,0.87,0.1)); +#64335 = VECTOR('',#64336,1.); +#64336 = DIRECTION('',(6.7E-16,1.,-1.28E-15)); +#64337 = ORIENTED_EDGE('',*,*,#64082,.F.); +#64338 = PLANE('',#64339); +#64339 = AXIS2_PLACEMENT_3D('',#64340,#64341,#64342); +#64340 = CARTESIAN_POINT('',(-2.895,0.87,0.66)); +#64341 = DIRECTION('',(-1.,6.7E-16,5.E-16)); +#64342 = DIRECTION('',(5.E-16,8.3E-16,1.)); +#64343 = ADVANCED_FACE('',(#64344),#64355,.T.); +#64344 = FACE_BOUND('',#64345,.T.); +#64345 = EDGE_LOOP('',(#64346,#64347,#64348,#64354)); +#64346 = ORIENTED_EDGE('',*,*,#64105,.T.); +#64347 = ORIENTED_EDGE('',*,*,#64306,.T.); +#64348 = ORIENTED_EDGE('',*,*,#64349,.F.); +#64349 = EDGE_CURVE('',#64163,#64307,#64350,.T.); +#64350 = LINE('',#64351,#64352); +#64351 = CARTESIAN_POINT('',(-2.775,0.87,0.52)); +#64352 = VECTOR('',#64353,1.); +#64353 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#64354 = ORIENTED_EDGE('',*,*,#64170,.F.); +#64355 = CYLINDRICAL_SURFACE('',#64356,0.14); +#64356 = AXIS2_PLACEMENT_3D('',#64357,#64358,#64359); +#64357 = CARTESIAN_POINT('',(-2.775,1.01,0.52)); +#64358 = DIRECTION('',(-1.,-1.05E-15,2.8E-16)); +#64359 = DIRECTION('',(2.8E-16,5.6E-16,1.)); +#64360 = ADVANCED_FACE('',(#64361),#64372,.T.); +#64361 = FACE_BOUND('',#64362,.F.); +#64362 = EDGE_LOOP('',(#64363,#64364,#64370,#64371)); +#64363 = ORIENTED_EDGE('',*,*,#64332,.F.); +#64364 = ORIENTED_EDGE('',*,*,#64365,.T.); +#64365 = EDGE_CURVE('',#64324,#64146,#64366,.T.); +#64366 = LINE('',#64367,#64368); +#64367 = CARTESIAN_POINT('',(-2.895,1.01,0.1)); +#64368 = VECTOR('',#64369,1.); +#64369 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64370 = ORIENTED_EDGE('',*,*,#64145,.T.); +#64371 = ORIENTED_EDGE('',*,*,#64131,.F.); +#64372 = PLANE('',#64373); +#64373 = AXIS2_PLACEMENT_3D('',#64374,#64375,#64376); +#64374 = CARTESIAN_POINT('',(-2.895,0.87,0.1)); +#64375 = DIRECTION('',(4.2E-16,-5.6E-16,-1.)); +#64376 = DIRECTION('',(-1.,-1.05E-15,-4.2E-16)); +#64377 = ADVANCED_FACE('',(#64378),#64389,.F.); +#64378 = FACE_BOUND('',#64379,.T.); +#64379 = EDGE_LOOP('',(#64380,#64381,#64382,#64383)); +#64380 = ORIENTED_EDGE('',*,*,#64162,.T.); +#64381 = ORIENTED_EDGE('',*,*,#64349,.T.); +#64382 = ORIENTED_EDGE('',*,*,#64315,.T.); +#64383 = ORIENTED_EDGE('',*,*,#64384,.T.); +#64384 = EDGE_CURVE('',#64316,#64154,#64385,.T.); +#64385 = LINE('',#64386,#64387); +#64386 = CARTESIAN_POINT('',(-2.895,0.87,0.24)); +#64387 = VECTOR('',#64388,1.); +#64388 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64389 = PLANE('',#64390); +#64390 = AXIS2_PLACEMENT_3D('',#64391,#64392,#64393); +#64391 = CARTESIAN_POINT('',(-2.835,0.87,0.38)); +#64392 = DIRECTION('',(2.E-17,1.,-1.25E-15)); +#64393 = DIRECTION('',(1.,-2.E-17,6.7E-16)); +#64394 = ADVANCED_FACE('',(#64395),#64401,.T.); +#64395 = FACE_BOUND('',#64396,.T.); +#64396 = EDGE_LOOP('',(#64397,#64398,#64399,#64400)); +#64397 = ORIENTED_EDGE('',*,*,#64365,.T.); +#64398 = ORIENTED_EDGE('',*,*,#64153,.T.); +#64399 = ORIENTED_EDGE('',*,*,#64384,.F.); +#64400 = ORIENTED_EDGE('',*,*,#64323,.F.); +#64401 = CYLINDRICAL_SURFACE('',#64402,0.14); +#64402 = AXIS2_PLACEMENT_3D('',#64403,#64404,#64405); +#64403 = CARTESIAN_POINT('',(-2.895,1.01,0.24)); +#64404 = DIRECTION('',(1.,1.05E-15,4.2E-16)); +#64405 = DIRECTION('',(4.2E-16,-5.6E-16,-1.)); +#64406 = ADVANCED_FACE('',(#64407),#64418,.T.); +#64407 = FACE_BOUND('',#64408,.T.); +#64408 = EDGE_LOOP('',(#64409,#64410,#64416,#64417)); +#64409 = ORIENTED_EDGE('',*,*,#64290,.F.); +#64410 = ORIENTED_EDGE('',*,*,#64411,.T.); +#64411 = EDGE_CURVE('',#64282,#64205,#64412,.T.); +#64412 = LINE('',#64413,#64414); +#64413 = CARTESIAN_POINT('',(2.895,1.01,0.1)); +#64414 = VECTOR('',#64415,1.); +#64415 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64416 = ORIENTED_EDGE('',*,*,#64204,.T.); +#64417 = ORIENTED_EDGE('',*,*,#64190,.F.); +#64418 = PLANE('',#64419); +#64419 = AXIS2_PLACEMENT_3D('',#64420,#64421,#64422); +#64420 = CARTESIAN_POINT('',(2.895,0.87,0.1)); +#64421 = DIRECTION('',(2.5E-16,-7.8E-16,-1.)); +#64422 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64423 = ADVANCED_FACE('',(#64424),#64435,.T.); +#64424 = FACE_BOUND('',#64425,.T.); +#64425 = EDGE_LOOP('',(#64426,#64427,#64433,#64434)); +#64426 = ORIENTED_EDGE('',*,*,#64281,.T.); +#64427 = ORIENTED_EDGE('',*,*,#64428,.T.); +#64428 = EDGE_CURVE('',#64274,#64213,#64429,.T.); +#64429 = LINE('',#64430,#64431); +#64430 = CARTESIAN_POINT('',(2.895,0.87,0.24)); +#64431 = VECTOR('',#64432,1.); +#64432 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64433 = ORIENTED_EDGE('',*,*,#64212,.F.); +#64434 = ORIENTED_EDGE('',*,*,#64411,.F.); +#64435 = CYLINDRICAL_SURFACE('',#64436,0.14); +#64436 = AXIS2_PLACEMENT_3D('',#64437,#64438,#64439); +#64437 = CARTESIAN_POINT('',(2.895,1.01,0.24)); +#64438 = DIRECTION('',(-1.,2.16E-15,-2.5E-16)); +#64439 = DIRECTION('',(2.5E-16,-7.8E-16,-1.)); +#64440 = ADVANCED_FACE('',(#64441),#64447,.F.); +#64441 = FACE_BOUND('',#64442,.F.); +#64442 = EDGE_LOOP('',(#64443,#64444,#64445,#64446)); +#64443 = ORIENTED_EDGE('',*,*,#64273,.T.); +#64444 = ORIENTED_EDGE('',*,*,#64428,.T.); +#64445 = ORIENTED_EDGE('',*,*,#64221,.T.); +#64446 = ORIENTED_EDGE('',*,*,#64247,.T.); +#64447 = PLANE('',#64448); +#64448 = AXIS2_PLACEMENT_3D('',#64449,#64450,#64451); +#64449 = CARTESIAN_POINT('',(2.835,0.87,0.38)); +#64450 = DIRECTION('',(1.09E-15,1.,-1.03E-15)); +#64451 = DIRECTION('',(1.,-1.09E-15,4.348495553653E-47)); +#64452 = MANIFOLD_SOLID_BREP('',#64453); +#64453 = CLOSED_SHELL('',(#64454,#64494,#64575,#64600,#64624,#64690, + #64707,#64724,#64741,#64758,#64775,#64792)); +#64454 = ADVANCED_FACE('',(#64455),#64489,.F.); +#64455 = FACE_BOUND('',#64456,.T.); +#64456 = EDGE_LOOP('',(#64457,#64467,#64475,#64483)); +#64457 = ORIENTED_EDGE('',*,*,#64458,.F.); +#64458 = EDGE_CURVE('',#64459,#64461,#64463,.T.); +#64459 = VERTEX_POINT('',#64460); +#64460 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64461 = VERTEX_POINT('',#64462); +#64462 = CARTESIAN_POINT('',(3.562132034356,0.3,-5.E-02)); +#64463 = LINE('',#64464,#64465); +#64464 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64465 = VECTOR('',#64466,1.); +#64466 = DIRECTION('',(-1.,-0.,-0.)); +#64467 = ORIENTED_EDGE('',*,*,#64468,.T.); +#64468 = EDGE_CURVE('',#64459,#64469,#64471,.T.); +#64469 = VERTEX_POINT('',#64470); +#64470 = CARTESIAN_POINT('',(4.,-0.3,-5.E-02)); +#64471 = LINE('',#64472,#64473); +#64472 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64473 = VECTOR('',#64474,1.); +#64474 = DIRECTION('',(0.,-1.,2.2E-16)); +#64475 = ORIENTED_EDGE('',*,*,#64476,.T.); +#64476 = EDGE_CURVE('',#64469,#64477,#64479,.T.); +#64477 = VERTEX_POINT('',#64478); +#64478 = CARTESIAN_POINT('',(3.562132034356,-0.3,-5.E-02)); +#64479 = LINE('',#64480,#64481); +#64480 = CARTESIAN_POINT('',(4.,-0.3,-5.E-02)); +#64481 = VECTOR('',#64482,1.); +#64482 = DIRECTION('',(-1.,-0.,-0.)); +#64483 = ORIENTED_EDGE('',*,*,#64484,.F.); +#64484 = EDGE_CURVE('',#64461,#64477,#64485,.T.); +#64485 = LINE('',#64486,#64487); +#64486 = CARTESIAN_POINT('',(3.562132034356,0.3,-5.E-02)); +#64487 = VECTOR('',#64488,1.); +#64488 = DIRECTION('',(0.,-1.,2.2E-16)); +#64489 = PLANE('',#64490); +#64490 = AXIS2_PLACEMENT_3D('',#64491,#64492,#64493); +#64491 = CARTESIAN_POINT('',(4.,0.3,-5.E-02)); +#64492 = DIRECTION('',(0.,2.2E-16,1.)); +#64493 = DIRECTION('',(1.,0.,-0.)); +#64494 = ADVANCED_FACE('',(#64495),#64570,.T.); +#64495 = FACE_BOUND('',#64496,.F.); +#64496 = EDGE_LOOP('',(#64497,#64498,#64506,#64514,#64522,#64531,#64539, + #64547,#64555,#64563)); +#64497 = ORIENTED_EDGE('',*,*,#64458,.F.); +#64498 = ORIENTED_EDGE('',*,*,#64499,.F.); +#64499 = EDGE_CURVE('',#64500,#64459,#64502,.T.); +#64500 = VERTEX_POINT('',#64501); +#64501 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64502 = LINE('',#64503,#64504); +#64503 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64504 = VECTOR('',#64505,1.); +#64505 = DIRECTION('',(0.,2.2E-16,-1.)); +#64506 = ORIENTED_EDGE('',*,*,#64507,.T.); +#64507 = EDGE_CURVE('',#64500,#64508,#64510,.T.); +#64508 = VERTEX_POINT('',#64509); +#64509 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64510 = LINE('',#64511,#64512); +#64511 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64512 = VECTOR('',#64513,1.); +#64513 = DIRECTION('',(-1.,-0.,-0.)); +#64514 = ORIENTED_EDGE('',*,*,#64515,.T.); +#64515 = EDGE_CURVE('',#64508,#64516,#64518,.T.); +#64516 = VERTEX_POINT('',#64517); +#64517 = CARTESIAN_POINT('',(3.273933982822,0.3,0.456066017178)); +#64518 = LINE('',#64519,#64520); +#64519 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64520 = VECTOR('',#64521,1.); +#64521 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64522 = ORIENTED_EDGE('',*,*,#64523,.F.); +#64523 = EDGE_CURVE('',#64524,#64516,#64526,.T.); +#64524 = VERTEX_POINT('',#64525); +#64525 = CARTESIAN_POINT('',(3.167867965644,0.3,0.5)); +#64526 = CIRCLE('',#64527,0.15); +#64527 = AXIS2_PLACEMENT_3D('',#64528,#64529,#64530); +#64528 = CARTESIAN_POINT('',(3.167867965644,0.3,0.35)); +#64529 = DIRECTION('',(0.,1.,-2.2E-16)); +#64530 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64531 = ORIENTED_EDGE('',*,*,#64532,.T.); +#64532 = EDGE_CURVE('',#64524,#64533,#64535,.T.); +#64533 = VERTEX_POINT('',#64534); +#64534 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64535 = LINE('',#64536,#64537); +#64536 = CARTESIAN_POINT('',(3.23,0.3,0.5)); +#64537 = VECTOR('',#64538,1.); +#64538 = DIRECTION('',(-1.,-0.,-0.)); +#64539 = ORIENTED_EDGE('',*,*,#64540,.T.); +#64540 = EDGE_CURVE('',#64533,#64541,#64543,.T.); +#64541 = VERTEX_POINT('',#64542); +#64542 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64543 = LINE('',#64544,#64545); +#64544 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64545 = VECTOR('',#64546,1.); +#64546 = DIRECTION('',(0.,2.2E-16,-1.)); +#64547 = ORIENTED_EDGE('',*,*,#64548,.T.); +#64548 = EDGE_CURVE('',#64541,#64549,#64551,.T.); +#64549 = VERTEX_POINT('',#64550); +#64550 = CARTESIAN_POINT('',(3.15,0.3,0.3)); +#64551 = LINE('',#64552,#64553); +#64552 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64553 = VECTOR('',#64554,1.); +#64554 = DIRECTION('',(1.,0.,0.)); +#64555 = ORIENTED_EDGE('',*,*,#64556,.F.); +#64556 = EDGE_CURVE('',#64557,#64549,#64559,.T.); +#64557 = VERTEX_POINT('',#64558); +#64558 = CARTESIAN_POINT('',(3.456066017178,0.3,-6.066017177982E-03)); +#64559 = LINE('',#64560,#64561); +#64560 = CARTESIAN_POINT('',(3.5,0.3,-5.E-02)); +#64561 = VECTOR('',#64562,1.); +#64562 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64563 = ORIENTED_EDGE('',*,*,#64564,.F.); +#64564 = EDGE_CURVE('',#64461,#64557,#64565,.T.); +#64565 = CIRCLE('',#64566,0.15); +#64566 = AXIS2_PLACEMENT_3D('',#64567,#64568,#64569); +#64567 = CARTESIAN_POINT('',(3.562132034356,0.3,0.1)); +#64568 = DIRECTION('',(0.,1.,-2.2E-16)); +#64569 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64570 = PLANE('',#64571); +#64571 = AXIS2_PLACEMENT_3D('',#64572,#64573,#64574); +#64572 = CARTESIAN_POINT('',(3.507087712869,0.3,0.181755913475)); +#64573 = DIRECTION('',(0.,1.,0.)); +#64574 = DIRECTION('',(0.,0.,-1.)); +#64575 = ADVANCED_FACE('',(#64576),#64595,.T.); +#64576 = FACE_BOUND('',#64577,.T.); +#64577 = EDGE_LOOP('',(#64578,#64579,#64588,#64594)); +#64578 = ORIENTED_EDGE('',*,*,#64484,.T.); +#64579 = ORIENTED_EDGE('',*,*,#64580,.T.); +#64580 = EDGE_CURVE('',#64477,#64581,#64583,.T.); +#64581 = VERTEX_POINT('',#64582); +#64582 = CARTESIAN_POINT('',(3.456066017178,-0.3,-6.066017177982E-03)); +#64583 = CIRCLE('',#64584,0.15); +#64584 = AXIS2_PLACEMENT_3D('',#64585,#64586,#64587); +#64585 = CARTESIAN_POINT('',(3.562132034356,-0.3,0.1)); +#64586 = DIRECTION('',(0.,1.,-2.2E-16)); +#64587 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64588 = ORIENTED_EDGE('',*,*,#64589,.F.); +#64589 = EDGE_CURVE('',#64557,#64581,#64590,.T.); +#64590 = LINE('',#64591,#64592); +#64591 = CARTESIAN_POINT('',(3.456066017178,0.3,-6.066017177982E-03)); +#64592 = VECTOR('',#64593,1.); +#64593 = DIRECTION('',(0.,-1.,2.2E-16)); +#64594 = ORIENTED_EDGE('',*,*,#64564,.F.); +#64595 = CYLINDRICAL_SURFACE('',#64596,0.15); +#64596 = AXIS2_PLACEMENT_3D('',#64597,#64598,#64599); +#64597 = CARTESIAN_POINT('',(3.562132034356,0.3,0.1)); +#64598 = DIRECTION('',(0.,-1.,2.2E-16)); +#64599 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#64600 = ADVANCED_FACE('',(#64601),#64619,.F.); +#64601 = FACE_BOUND('',#64602,.T.); +#64602 = EDGE_LOOP('',(#64603,#64611,#64617,#64618)); +#64603 = ORIENTED_EDGE('',*,*,#64604,.T.); +#64604 = EDGE_CURVE('',#64500,#64605,#64607,.T.); +#64605 = VERTEX_POINT('',#64606); +#64606 = CARTESIAN_POINT('',(4.,-0.3,0.15)); +#64607 = LINE('',#64608,#64609); +#64608 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64609 = VECTOR('',#64610,1.); +#64610 = DIRECTION('',(0.,-1.,2.2E-16)); +#64611 = ORIENTED_EDGE('',*,*,#64612,.T.); +#64612 = EDGE_CURVE('',#64605,#64469,#64613,.T.); +#64613 = LINE('',#64614,#64615); +#64614 = CARTESIAN_POINT('',(4.,-0.3,0.15)); +#64615 = VECTOR('',#64616,1.); +#64616 = DIRECTION('',(0.,2.2E-16,-1.)); +#64617 = ORIENTED_EDGE('',*,*,#64468,.F.); +#64618 = ORIENTED_EDGE('',*,*,#64499,.F.); +#64619 = PLANE('',#64620); +#64620 = AXIS2_PLACEMENT_3D('',#64621,#64622,#64623); +#64621 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64622 = DIRECTION('',(-1.,-0.,-0.)); +#64623 = DIRECTION('',(-0.,2.2E-16,1.)); +#64624 = ADVANCED_FACE('',(#64625),#64685,.F.); +#64625 = FACE_BOUND('',#64626,.T.); +#64626 = EDGE_LOOP('',(#64627,#64628,#64629,#64637,#64645,#64654,#64662, + #64670,#64678,#64684)); +#64627 = ORIENTED_EDGE('',*,*,#64476,.F.); +#64628 = ORIENTED_EDGE('',*,*,#64612,.F.); +#64629 = ORIENTED_EDGE('',*,*,#64630,.T.); +#64630 = EDGE_CURVE('',#64605,#64631,#64633,.T.); +#64631 = VERTEX_POINT('',#64632); +#64632 = CARTESIAN_POINT('',(3.58,-0.3,0.15)); +#64633 = LINE('',#64634,#64635); +#64634 = CARTESIAN_POINT('',(4.,-0.3,0.15)); +#64635 = VECTOR('',#64636,1.); +#64636 = DIRECTION('',(-1.,-0.,-0.)); +#64637 = ORIENTED_EDGE('',*,*,#64638,.T.); +#64638 = EDGE_CURVE('',#64631,#64639,#64641,.T.); +#64639 = VERTEX_POINT('',#64640); +#64640 = CARTESIAN_POINT('',(3.273933982822,-0.3,0.456066017178)); +#64641 = LINE('',#64642,#64643); +#64642 = CARTESIAN_POINT('',(3.58,-0.3,0.15)); +#64643 = VECTOR('',#64644,1.); +#64644 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64645 = ORIENTED_EDGE('',*,*,#64646,.F.); +#64646 = EDGE_CURVE('',#64647,#64639,#64649,.T.); +#64647 = VERTEX_POINT('',#64648); +#64648 = CARTESIAN_POINT('',(3.167867965644,-0.3,0.5)); +#64649 = CIRCLE('',#64650,0.15); +#64650 = AXIS2_PLACEMENT_3D('',#64651,#64652,#64653); +#64651 = CARTESIAN_POINT('',(3.167867965644,-0.3,0.35)); +#64652 = DIRECTION('',(0.,1.,-2.2E-16)); +#64653 = DIRECTION('',(0.,-2.2E-16,-1.)); +#64654 = ORIENTED_EDGE('',*,*,#64655,.T.); +#64655 = EDGE_CURVE('',#64647,#64656,#64658,.T.); +#64656 = VERTEX_POINT('',#64657); +#64657 = CARTESIAN_POINT('',(3.05,-0.3,0.5)); +#64658 = LINE('',#64659,#64660); +#64659 = CARTESIAN_POINT('',(3.23,-0.3,0.5)); +#64660 = VECTOR('',#64661,1.); +#64661 = DIRECTION('',(-1.,-0.,-0.)); +#64662 = ORIENTED_EDGE('',*,*,#64663,.T.); +#64663 = EDGE_CURVE('',#64656,#64664,#64666,.T.); +#64664 = VERTEX_POINT('',#64665); +#64665 = CARTESIAN_POINT('',(3.05,-0.3,0.3)); +#64666 = LINE('',#64667,#64668); +#64667 = CARTESIAN_POINT('',(3.05,-0.3,0.5)); +#64668 = VECTOR('',#64669,1.); +#64669 = DIRECTION('',(0.,2.2E-16,-1.)); +#64670 = ORIENTED_EDGE('',*,*,#64671,.T.); +#64671 = EDGE_CURVE('',#64664,#64672,#64674,.T.); +#64672 = VERTEX_POINT('',#64673); +#64673 = CARTESIAN_POINT('',(3.15,-0.3,0.3)); +#64674 = LINE('',#64675,#64676); +#64675 = CARTESIAN_POINT('',(3.05,-0.3,0.3)); +#64676 = VECTOR('',#64677,1.); +#64677 = DIRECTION('',(1.,0.,0.)); +#64678 = ORIENTED_EDGE('',*,*,#64679,.F.); +#64679 = EDGE_CURVE('',#64581,#64672,#64680,.T.); +#64680 = LINE('',#64681,#64682); +#64681 = CARTESIAN_POINT('',(3.5,-0.3,-5.E-02)); +#64682 = VECTOR('',#64683,1.); +#64683 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + 0.707106781187)); +#64684 = ORIENTED_EDGE('',*,*,#64580,.F.); +#64685 = PLANE('',#64686); +#64686 = AXIS2_PLACEMENT_3D('',#64687,#64688,#64689); +#64687 = CARTESIAN_POINT('',(3.507087712869,-0.3,0.181755913475)); +#64688 = DIRECTION('',(0.,1.,0.)); +#64689 = DIRECTION('',(0.,0.,-1.)); +#64690 = ADVANCED_FACE('',(#64691),#64702,.F.); +#64691 = FACE_BOUND('',#64692,.T.); +#64692 = EDGE_LOOP('',(#64693,#64694,#64695,#64696)); +#64693 = ORIENTED_EDGE('',*,*,#64556,.F.); +#64694 = ORIENTED_EDGE('',*,*,#64589,.T.); +#64695 = ORIENTED_EDGE('',*,*,#64679,.T.); +#64696 = ORIENTED_EDGE('',*,*,#64697,.F.); +#64697 = EDGE_CURVE('',#64549,#64672,#64698,.T.); +#64698 = LINE('',#64699,#64700); +#64699 = CARTESIAN_POINT('',(3.15,0.3,0.3)); +#64700 = VECTOR('',#64701,1.); +#64701 = DIRECTION('',(0.,-1.,2.2E-16)); +#64702 = PLANE('',#64703); +#64703 = AXIS2_PLACEMENT_3D('',#64704,#64705,#64706); +#64704 = CARTESIAN_POINT('',(3.5,0.3,-5.E-02)); +#64705 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#64706 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#64707 = ADVANCED_FACE('',(#64708),#64719,.T.); +#64708 = FACE_BOUND('',#64709,.F.); +#64709 = EDGE_LOOP('',(#64710,#64711,#64712,#64718)); +#64710 = ORIENTED_EDGE('',*,*,#64604,.T.); +#64711 = ORIENTED_EDGE('',*,*,#64630,.T.); +#64712 = ORIENTED_EDGE('',*,*,#64713,.F.); +#64713 = EDGE_CURVE('',#64508,#64631,#64714,.T.); +#64714 = LINE('',#64715,#64716); +#64715 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64716 = VECTOR('',#64717,1.); +#64717 = DIRECTION('',(0.,-1.,2.2E-16)); +#64718 = ORIENTED_EDGE('',*,*,#64507,.F.); +#64719 = PLANE('',#64720); +#64720 = AXIS2_PLACEMENT_3D('',#64721,#64722,#64723); +#64721 = CARTESIAN_POINT('',(4.,0.3,0.15)); +#64722 = DIRECTION('',(0.,2.2E-16,1.)); +#64723 = DIRECTION('',(1.,0.,-0.)); +#64724 = ADVANCED_FACE('',(#64725),#64736,.T.); +#64725 = FACE_BOUND('',#64726,.F.); +#64726 = EDGE_LOOP('',(#64727,#64733,#64734,#64735)); +#64727 = ORIENTED_EDGE('',*,*,#64728,.T.); +#64728 = EDGE_CURVE('',#64541,#64664,#64729,.T.); +#64729 = LINE('',#64730,#64731); +#64730 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64731 = VECTOR('',#64732,1.); +#64732 = DIRECTION('',(0.,-1.,2.2E-16)); +#64733 = ORIENTED_EDGE('',*,*,#64671,.T.); +#64734 = ORIENTED_EDGE('',*,*,#64697,.F.); +#64735 = ORIENTED_EDGE('',*,*,#64548,.F.); +#64736 = PLANE('',#64737); +#64737 = AXIS2_PLACEMENT_3D('',#64738,#64739,#64740); +#64738 = CARTESIAN_POINT('',(3.05,0.3,0.3)); +#64739 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#64740 = DIRECTION('',(-1.,0.,0.)); +#64741 = ADVANCED_FACE('',(#64742),#64753,.T.); +#64742 = FACE_BOUND('',#64743,.F.); +#64743 = EDGE_LOOP('',(#64744,#64745,#64746,#64747)); +#64744 = ORIENTED_EDGE('',*,*,#64515,.F.); +#64745 = ORIENTED_EDGE('',*,*,#64713,.T.); +#64746 = ORIENTED_EDGE('',*,*,#64638,.T.); +#64747 = ORIENTED_EDGE('',*,*,#64748,.F.); +#64748 = EDGE_CURVE('',#64516,#64639,#64749,.T.); +#64749 = LINE('',#64750,#64751); +#64750 = CARTESIAN_POINT('',(3.273933982822,0.3,0.456066017178)); +#64751 = VECTOR('',#64752,1.); +#64752 = DIRECTION('',(0.,-1.,2.2E-16)); +#64753 = PLANE('',#64754); +#64754 = AXIS2_PLACEMENT_3D('',#64755,#64756,#64757); +#64755 = CARTESIAN_POINT('',(3.58,0.3,0.15)); +#64756 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#64757 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#64758 = ADVANCED_FACE('',(#64759),#64770,.T.); +#64759 = FACE_BOUND('',#64760,.F.); +#64760 = EDGE_LOOP('',(#64761,#64767,#64768,#64769)); +#64761 = ORIENTED_EDGE('',*,*,#64762,.T.); +#64762 = EDGE_CURVE('',#64533,#64656,#64763,.T.); +#64763 = LINE('',#64764,#64765); +#64764 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64765 = VECTOR('',#64766,1.); +#64766 = DIRECTION('',(0.,-1.,2.2E-16)); +#64767 = ORIENTED_EDGE('',*,*,#64663,.T.); +#64768 = ORIENTED_EDGE('',*,*,#64728,.F.); +#64769 = ORIENTED_EDGE('',*,*,#64540,.F.); +#64770 = PLANE('',#64771); +#64771 = AXIS2_PLACEMENT_3D('',#64772,#64773,#64774); +#64772 = CARTESIAN_POINT('',(3.05,0.3,0.5)); +#64773 = DIRECTION('',(-1.,-0.,-0.)); +#64774 = DIRECTION('',(-0.,2.2E-16,1.)); +#64775 = ADVANCED_FACE('',(#64776),#64787,.T.); +#64776 = FACE_BOUND('',#64777,.T.); +#64777 = EDGE_LOOP('',(#64778,#64784,#64785,#64786)); +#64778 = ORIENTED_EDGE('',*,*,#64779,.T.); +#64779 = EDGE_CURVE('',#64524,#64647,#64780,.T.); +#64780 = LINE('',#64781,#64782); +#64781 = CARTESIAN_POINT('',(3.167867965644,0.3,0.5)); +#64782 = VECTOR('',#64783,1.); +#64783 = DIRECTION('',(0.,-1.,2.2E-16)); +#64784 = ORIENTED_EDGE('',*,*,#64646,.T.); +#64785 = ORIENTED_EDGE('',*,*,#64748,.F.); +#64786 = ORIENTED_EDGE('',*,*,#64523,.F.); +#64787 = CYLINDRICAL_SURFACE('',#64788,0.15); +#64788 = AXIS2_PLACEMENT_3D('',#64789,#64790,#64791); +#64789 = CARTESIAN_POINT('',(3.167867965644,0.3,0.35)); +#64790 = DIRECTION('',(0.,-1.,2.2E-16)); +#64791 = DIRECTION('',(0.,2.2E-16,1.)); +#64792 = ADVANCED_FACE('',(#64793),#64799,.T.); +#64793 = FACE_BOUND('',#64794,.F.); +#64794 = EDGE_LOOP('',(#64795,#64796,#64797,#64798)); +#64795 = ORIENTED_EDGE('',*,*,#64532,.F.); +#64796 = ORIENTED_EDGE('',*,*,#64779,.T.); +#64797 = ORIENTED_EDGE('',*,*,#64655,.T.); +#64798 = ORIENTED_EDGE('',*,*,#64762,.F.); +#64799 = PLANE('',#64800); +#64800 = AXIS2_PLACEMENT_3D('',#64801,#64802,#64803); +#64801 = CARTESIAN_POINT('',(3.23,0.3,0.5)); +#64802 = DIRECTION('',(0.,2.2E-16,1.)); +#64803 = DIRECTION('',(1.,0.,-0.)); +#64804 = MANIFOLD_SOLID_BREP('',#64805); +#64805 = CLOSED_SHELL('',(#64806,#64846,#64913,#64938,#64963,#64996, + #65020,#65044,#65069,#65094,#65111,#65128,#65145,#65176,#65194, + #65212,#65229,#65246)); +#64806 = ADVANCED_FACE('',(#64807),#64841,.T.); +#64807 = FACE_BOUND('',#64808,.T.); +#64808 = EDGE_LOOP('',(#64809,#64819,#64827,#64835)); +#64809 = ORIENTED_EDGE('',*,*,#64810,.F.); +#64810 = EDGE_CURVE('',#64811,#64813,#64815,.T.); +#64811 = VERTEX_POINT('',#64812); +#64812 = CARTESIAN_POINT('',(-1.25,0.65,1.)); +#64813 = VERTEX_POINT('',#64814); +#64814 = CARTESIAN_POINT('',(1.25,0.65,1.)); +#64815 = LINE('',#64816,#64817); +#64816 = CARTESIAN_POINT('',(-1.35,0.65,1.)); +#64817 = VECTOR('',#64818,1.); +#64818 = DIRECTION('',(1.,0.,0.)); +#64819 = ORIENTED_EDGE('',*,*,#64820,.T.); +#64820 = EDGE_CURVE('',#64811,#64821,#64823,.T.); +#64821 = VERTEX_POINT('',#64822); +#64822 = CARTESIAN_POINT('',(-1.25,0.65,2.4)); +#64823 = LINE('',#64824,#64825); +#64824 = CARTESIAN_POINT('',(-1.25,0.65,1.)); +#64825 = VECTOR('',#64826,1.); +#64826 = DIRECTION('',(0.,0.,1.)); +#64827 = ORIENTED_EDGE('',*,*,#64828,.T.); +#64828 = EDGE_CURVE('',#64821,#64829,#64831,.T.); +#64829 = VERTEX_POINT('',#64830); +#64830 = CARTESIAN_POINT('',(1.25,0.65,2.4)); +#64831 = LINE('',#64832,#64833); +#64832 = CARTESIAN_POINT('',(-1.35,0.65,2.4)); +#64833 = VECTOR('',#64834,1.); +#64834 = DIRECTION('',(1.,0.,0.)); +#64835 = ORIENTED_EDGE('',*,*,#64836,.F.); +#64836 = EDGE_CURVE('',#64813,#64829,#64837,.T.); +#64837 = LINE('',#64838,#64839); +#64838 = CARTESIAN_POINT('',(1.25,0.65,1.)); +#64839 = VECTOR('',#64840,1.); +#64840 = DIRECTION('',(0.,0.,1.)); +#64841 = PLANE('',#64842); +#64842 = AXIS2_PLACEMENT_3D('',#64843,#64844,#64845); +#64843 = CARTESIAN_POINT('',(-1.35,0.65,1.)); +#64844 = DIRECTION('',(0.,1.,0.)); +#64845 = DIRECTION('',(1.,0.,0.)); +#64846 = ADVANCED_FACE('',(#64847),#64908,.F.); +#64847 = FACE_BOUND('',#64848,.F.); +#64848 = EDGE_LOOP('',(#64849,#64850,#64859,#64867,#64876,#64884,#64893, + #64901)); +#64849 = ORIENTED_EDGE('',*,*,#64810,.F.); +#64850 = ORIENTED_EDGE('',*,*,#64851,.T.); +#64851 = EDGE_CURVE('',#64811,#64852,#64854,.T.); +#64852 = VERTEX_POINT('',#64853); +#64853 = CARTESIAN_POINT('',(-1.35,0.55,1.)); +#64854 = CIRCLE('',#64855,0.1); +#64855 = AXIS2_PLACEMENT_3D('',#64856,#64857,#64858); +#64856 = CARTESIAN_POINT('',(-1.25,0.55,1.)); +#64857 = DIRECTION('',(-0.,0.,1.)); +#64858 = DIRECTION('',(0.,-1.,0.)); +#64859 = ORIENTED_EDGE('',*,*,#64860,.F.); +#64860 = EDGE_CURVE('',#64861,#64852,#64863,.T.); +#64861 = VERTEX_POINT('',#64862); +#64862 = CARTESIAN_POINT('',(-1.35,-0.55,1.)); +#64863 = LINE('',#64864,#64865); +#64864 = CARTESIAN_POINT('',(-1.35,-0.65,1.)); +#64865 = VECTOR('',#64866,1.); +#64866 = DIRECTION('',(0.,1.,0.)); +#64867 = ORIENTED_EDGE('',*,*,#64868,.F.); +#64868 = EDGE_CURVE('',#64869,#64861,#64871,.T.); +#64869 = VERTEX_POINT('',#64870); +#64870 = CARTESIAN_POINT('',(-1.25,-0.65,1.)); +#64871 = CIRCLE('',#64872,0.1); +#64872 = AXIS2_PLACEMENT_3D('',#64873,#64874,#64875); +#64873 = CARTESIAN_POINT('',(-1.25,-0.55,1.)); +#64874 = DIRECTION('',(-0.,-0.,-1.)); +#64875 = DIRECTION('',(0.,-1.,0.)); +#64876 = ORIENTED_EDGE('',*,*,#64877,.F.); +#64877 = EDGE_CURVE('',#64878,#64869,#64880,.T.); +#64878 = VERTEX_POINT('',#64879); +#64879 = CARTESIAN_POINT('',(1.25,-0.65,1.)); +#64880 = LINE('',#64881,#64882); +#64881 = CARTESIAN_POINT('',(1.35,-0.65,1.)); +#64882 = VECTOR('',#64883,1.); +#64883 = DIRECTION('',(-1.,0.,0.)); +#64884 = ORIENTED_EDGE('',*,*,#64885,.F.); +#64885 = EDGE_CURVE('',#64886,#64878,#64888,.T.); +#64886 = VERTEX_POINT('',#64887); +#64887 = CARTESIAN_POINT('',(1.35,-0.55,1.)); +#64888 = CIRCLE('',#64889,0.1); +#64889 = AXIS2_PLACEMENT_3D('',#64890,#64891,#64892); +#64890 = CARTESIAN_POINT('',(1.25,-0.55,1.)); +#64891 = DIRECTION('',(-0.,-0.,-1.)); +#64892 = DIRECTION('',(0.,-1.,0.)); +#64893 = ORIENTED_EDGE('',*,*,#64894,.F.); +#64894 = EDGE_CURVE('',#64895,#64886,#64897,.T.); +#64895 = VERTEX_POINT('',#64896); +#64896 = CARTESIAN_POINT('',(1.35,0.55,1.)); +#64897 = LINE('',#64898,#64899); +#64898 = CARTESIAN_POINT('',(1.35,0.65,1.)); +#64899 = VECTOR('',#64900,1.); +#64900 = DIRECTION('',(0.,-1.,0.)); +#64901 = ORIENTED_EDGE('',*,*,#64902,.F.); +#64902 = EDGE_CURVE('',#64813,#64895,#64903,.T.); +#64903 = CIRCLE('',#64904,0.1); +#64904 = AXIS2_PLACEMENT_3D('',#64905,#64906,#64907); +#64905 = CARTESIAN_POINT('',(1.25,0.55,1.)); +#64906 = DIRECTION('',(-0.,-0.,-1.)); +#64907 = DIRECTION('',(0.,-1.,0.)); +#64908 = PLANE('',#64909); +#64909 = AXIS2_PLACEMENT_3D('',#64910,#64911,#64912); +#64910 = CARTESIAN_POINT('',(3.E-17,0.,1.)); +#64911 = DIRECTION('',(0.,0.,1.)); +#64912 = DIRECTION('',(1.,0.,-0.)); +#64913 = ADVANCED_FACE('',(#64914),#64933,.T.); +#64914 = FACE_BOUND('',#64915,.T.); +#64915 = EDGE_LOOP('',(#64916,#64917,#64925,#64932)); +#64916 = ORIENTED_EDGE('',*,*,#64851,.T.); +#64917 = ORIENTED_EDGE('',*,*,#64918,.T.); +#64918 = EDGE_CURVE('',#64852,#64919,#64921,.T.); +#64919 = VERTEX_POINT('',#64920); +#64920 = CARTESIAN_POINT('',(-1.35,0.55,2.4)); +#64921 = LINE('',#64922,#64923); +#64922 = CARTESIAN_POINT('',(-1.35,0.55,1.)); +#64923 = VECTOR('',#64924,1.); +#64924 = DIRECTION('',(0.,0.,1.)); +#64925 = ORIENTED_EDGE('',*,*,#64926,.T.); +#64926 = EDGE_CURVE('',#64919,#64821,#64927,.T.); +#64927 = CIRCLE('',#64928,0.1); +#64928 = AXIS2_PLACEMENT_3D('',#64929,#64930,#64931); +#64929 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#64930 = DIRECTION('',(0.,6.E-17,-1.)); +#64931 = DIRECTION('',(0.,1.,6.E-17)); +#64932 = ORIENTED_EDGE('',*,*,#64820,.F.); +#64933 = CYLINDRICAL_SURFACE('',#64934,0.1); +#64934 = AXIS2_PLACEMENT_3D('',#64935,#64936,#64937); +#64935 = CARTESIAN_POINT('',(-1.25,0.55,1.)); +#64936 = DIRECTION('',(0.,0.,1.)); +#64937 = DIRECTION('',(0.,1.,0.)); +#64938 = ADVANCED_FACE('',(#64939),#64958,.T.); +#64939 = FACE_BOUND('',#64940,.T.); +#64940 = EDGE_LOOP('',(#64941,#64942,#64951,#64957)); +#64941 = ORIENTED_EDGE('',*,*,#64836,.T.); +#64942 = ORIENTED_EDGE('',*,*,#64943,.T.); +#64943 = EDGE_CURVE('',#64829,#64944,#64946,.T.); +#64944 = VERTEX_POINT('',#64945); +#64945 = CARTESIAN_POINT('',(1.35,0.55,2.4)); +#64946 = CIRCLE('',#64947,0.1); +#64947 = AXIS2_PLACEMENT_3D('',#64948,#64949,#64950); +#64948 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#64949 = DIRECTION('',(0.,0.,-1.)); +#64950 = DIRECTION('',(0.,1.,0.)); +#64951 = ORIENTED_EDGE('',*,*,#64952,.F.); +#64952 = EDGE_CURVE('',#64895,#64944,#64953,.T.); +#64953 = LINE('',#64954,#64955); +#64954 = CARTESIAN_POINT('',(1.35,0.55,1.)); +#64955 = VECTOR('',#64956,1.); +#64956 = DIRECTION('',(0.,0.,1.)); +#64957 = ORIENTED_EDGE('',*,*,#64902,.F.); +#64958 = CYLINDRICAL_SURFACE('',#64959,0.1); +#64959 = AXIS2_PLACEMENT_3D('',#64960,#64961,#64962); +#64960 = CARTESIAN_POINT('',(1.25,0.55,1.)); +#64961 = DIRECTION('',(0.,0.,1.)); +#64962 = DIRECTION('',(0.,1.,0.)); +#64963 = ADVANCED_FACE('',(#64964),#64991,.T.); +#64964 = FACE_BOUND('',#64965,.T.); +#64965 = EDGE_LOOP('',(#64966,#64967,#64976,#64984)); +#64966 = ORIENTED_EDGE('',*,*,#64828,.F.); +#64967 = ORIENTED_EDGE('',*,*,#64968,.F.); +#64968 = EDGE_CURVE('',#64969,#64821,#64971,.T.); +#64969 = VERTEX_POINT('',#64970); +#64970 = CARTESIAN_POINT('',(-1.25,0.55,2.5)); +#64971 = CIRCLE('',#64972,0.1); +#64972 = AXIS2_PLACEMENT_3D('',#64973,#64974,#64975); +#64973 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#64974 = DIRECTION('',(-1.,0.,0.)); +#64975 = DIRECTION('',(0.,-1.11E-15,1.)); +#64976 = ORIENTED_EDGE('',*,*,#64977,.T.); +#64977 = EDGE_CURVE('',#64969,#64978,#64980,.T.); +#64978 = VERTEX_POINT('',#64979); +#64979 = CARTESIAN_POINT('',(1.25,0.55,2.5)); +#64980 = LINE('',#64981,#64982); +#64981 = CARTESIAN_POINT('',(-1.35,0.55,2.5)); +#64982 = VECTOR('',#64983,1.); +#64983 = DIRECTION('',(1.,0.,0.)); +#64984 = ORIENTED_EDGE('',*,*,#64985,.T.); +#64985 = EDGE_CURVE('',#64978,#64829,#64986,.T.); +#64986 = CIRCLE('',#64987,0.1); +#64987 = AXIS2_PLACEMENT_3D('',#64988,#64989,#64990); +#64988 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#64989 = DIRECTION('',(-1.,0.,0.)); +#64990 = DIRECTION('',(0.,1.,0.)); +#64991 = CYLINDRICAL_SURFACE('',#64992,0.1); +#64992 = AXIS2_PLACEMENT_3D('',#64993,#64994,#64995); +#64993 = CARTESIAN_POINT('',(-1.35,0.55,2.4)); +#64994 = DIRECTION('',(1.,0.,0.)); +#64995 = DIRECTION('',(-0.,1.,0.)); +#64996 = ADVANCED_FACE('',(#64997),#65015,.T.); +#64997 = FACE_BOUND('',#64998,.T.); +#64998 = EDGE_LOOP('',(#64999,#65000,#65008,#65014)); +#64999 = ORIENTED_EDGE('',*,*,#64860,.F.); +#65000 = ORIENTED_EDGE('',*,*,#65001,.T.); +#65001 = EDGE_CURVE('',#64861,#65002,#65004,.T.); +#65002 = VERTEX_POINT('',#65003); +#65003 = CARTESIAN_POINT('',(-1.35,-0.55,2.4)); +#65004 = LINE('',#65005,#65006); +#65005 = CARTESIAN_POINT('',(-1.35,-0.55,1.)); +#65006 = VECTOR('',#65007,1.); +#65007 = DIRECTION('',(0.,0.,1.)); +#65008 = ORIENTED_EDGE('',*,*,#65009,.T.); +#65009 = EDGE_CURVE('',#65002,#64919,#65010,.T.); +#65010 = LINE('',#65011,#65012); +#65011 = CARTESIAN_POINT('',(-1.35,-0.65,2.4)); +#65012 = VECTOR('',#65013,1.); +#65013 = DIRECTION('',(0.,1.,0.)); +#65014 = ORIENTED_EDGE('',*,*,#64918,.F.); +#65015 = PLANE('',#65016); +#65016 = AXIS2_PLACEMENT_3D('',#65017,#65018,#65019); +#65017 = CARTESIAN_POINT('',(-1.35,-0.65,1.)); +#65018 = DIRECTION('',(-1.,0.,0.)); +#65019 = DIRECTION('',(0.,1.,0.)); +#65020 = ADVANCED_FACE('',(#65021),#65039,.T.); +#65021 = FACE_BOUND('',#65022,.T.); +#65022 = EDGE_LOOP('',(#65023,#65024,#65025,#65033)); +#65023 = ORIENTED_EDGE('',*,*,#64894,.F.); +#65024 = ORIENTED_EDGE('',*,*,#64952,.T.); +#65025 = ORIENTED_EDGE('',*,*,#65026,.T.); +#65026 = EDGE_CURVE('',#64944,#65027,#65029,.T.); +#65027 = VERTEX_POINT('',#65028); +#65028 = CARTESIAN_POINT('',(1.35,-0.55,2.4)); +#65029 = LINE('',#65030,#65031); +#65030 = CARTESIAN_POINT('',(1.35,0.65,2.4)); +#65031 = VECTOR('',#65032,1.); +#65032 = DIRECTION('',(0.,-1.,0.)); +#65033 = ORIENTED_EDGE('',*,*,#65034,.F.); +#65034 = EDGE_CURVE('',#64886,#65027,#65035,.T.); +#65035 = LINE('',#65036,#65037); +#65036 = CARTESIAN_POINT('',(1.35,-0.55,1.)); +#65037 = VECTOR('',#65038,1.); +#65038 = DIRECTION('',(0.,0.,1.)); +#65039 = PLANE('',#65040); +#65040 = AXIS2_PLACEMENT_3D('',#65041,#65042,#65043); +#65041 = CARTESIAN_POINT('',(1.35,0.65,1.)); +#65042 = DIRECTION('',(1.,0.,0.)); +#65043 = DIRECTION('',(0.,-1.,0.)); +#65044 = ADVANCED_FACE('',(#65045),#65064,.T.); +#65045 = FACE_BOUND('',#65046,.T.); +#65046 = EDGE_LOOP('',(#65047,#65055,#65062,#65063)); +#65047 = ORIENTED_EDGE('',*,*,#65048,.T.); +#65048 = EDGE_CURVE('',#64869,#65049,#65051,.T.); +#65049 = VERTEX_POINT('',#65050); +#65050 = CARTESIAN_POINT('',(-1.25,-0.65,2.4)); +#65051 = LINE('',#65052,#65053); +#65052 = CARTESIAN_POINT('',(-1.25,-0.65,1.)); +#65053 = VECTOR('',#65054,1.); +#65054 = DIRECTION('',(0.,0.,1.)); +#65055 = ORIENTED_EDGE('',*,*,#65056,.T.); +#65056 = EDGE_CURVE('',#65049,#65002,#65057,.T.); +#65057 = CIRCLE('',#65058,0.1); +#65058 = AXIS2_PLACEMENT_3D('',#65059,#65060,#65061); +#65059 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65060 = DIRECTION('',(-0.,-0.,-1.)); +#65061 = DIRECTION('',(0.,-1.,0.)); +#65062 = ORIENTED_EDGE('',*,*,#65001,.F.); +#65063 = ORIENTED_EDGE('',*,*,#64868,.F.); +#65064 = CYLINDRICAL_SURFACE('',#65065,0.1); +#65065 = AXIS2_PLACEMENT_3D('',#65066,#65067,#65068); +#65066 = CARTESIAN_POINT('',(-1.25,-0.55,1.)); +#65067 = DIRECTION('',(0.,0.,1.)); +#65068 = DIRECTION('',(0.,-1.,0.)); +#65069 = ADVANCED_FACE('',(#65070),#65089,.T.); +#65070 = FACE_BOUND('',#65071,.T.); +#65071 = EDGE_LOOP('',(#65072,#65073,#65082,#65088)); +#65072 = ORIENTED_EDGE('',*,*,#65034,.T.); +#65073 = ORIENTED_EDGE('',*,*,#65074,.T.); +#65074 = EDGE_CURVE('',#65027,#65075,#65077,.T.); +#65075 = VERTEX_POINT('',#65076); +#65076 = CARTESIAN_POINT('',(1.25,-0.65,2.4)); +#65077 = CIRCLE('',#65078,0.1); +#65078 = AXIS2_PLACEMENT_3D('',#65079,#65080,#65081); +#65079 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65080 = DIRECTION('',(0.,0.,-1.)); +#65081 = DIRECTION('',(0.,-1.,0.)); +#65082 = ORIENTED_EDGE('',*,*,#65083,.F.); +#65083 = EDGE_CURVE('',#64878,#65075,#65084,.T.); +#65084 = LINE('',#65085,#65086); +#65085 = CARTESIAN_POINT('',(1.25,-0.65,1.)); +#65086 = VECTOR('',#65087,1.); +#65087 = DIRECTION('',(0.,0.,1.)); +#65088 = ORIENTED_EDGE('',*,*,#64885,.F.); +#65089 = CYLINDRICAL_SURFACE('',#65090,0.1); +#65090 = AXIS2_PLACEMENT_3D('',#65091,#65092,#65093); +#65091 = CARTESIAN_POINT('',(1.25,-0.55,1.)); +#65092 = DIRECTION('',(0.,0.,1.)); +#65093 = DIRECTION('',(1.,0.,-0.)); +#65094 = ADVANCED_FACE('',(#65095),#65106,.T.); +#65095 = FACE_BOUND('',#65096,.T.); +#65096 = EDGE_LOOP('',(#65097,#65098,#65099,#65105)); +#65097 = ORIENTED_EDGE('',*,*,#64877,.F.); +#65098 = ORIENTED_EDGE('',*,*,#65083,.T.); +#65099 = ORIENTED_EDGE('',*,*,#65100,.T.); +#65100 = EDGE_CURVE('',#65075,#65049,#65101,.T.); +#65101 = LINE('',#65102,#65103); +#65102 = CARTESIAN_POINT('',(1.35,-0.65,2.4)); +#65103 = VECTOR('',#65104,1.); +#65104 = DIRECTION('',(-1.,0.,0.)); +#65105 = ORIENTED_EDGE('',*,*,#65048,.F.); +#65106 = PLANE('',#65107); +#65107 = AXIS2_PLACEMENT_3D('',#65108,#65109,#65110); +#65108 = CARTESIAN_POINT('',(1.35,-0.65,1.)); +#65109 = DIRECTION('',(0.,-1.,0.)); +#65110 = DIRECTION('',(-1.,0.,0.)); +#65111 = ADVANCED_FACE('',(#65112),#65123,.T.); +#65112 = FACE_BOUND('',#65113,.T.); +#65113 = EDGE_LOOP('',(#65114,#65115,#65116)); +#65114 = ORIENTED_EDGE('',*,*,#64968,.T.); +#65115 = ORIENTED_EDGE('',*,*,#64926,.F.); +#65116 = ORIENTED_EDGE('',*,*,#65117,.T.); +#65117 = EDGE_CURVE('',#64919,#64969,#65118,.T.); +#65118 = CIRCLE('',#65119,0.1); +#65119 = AXIS2_PLACEMENT_3D('',#65120,#65121,#65122); +#65120 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#65121 = DIRECTION('',(-0.,1.,1.11E-15)); +#65122 = DIRECTION('',(0.,-1.11E-15,1.)); +#65123 = SPHERICAL_SURFACE('',#65124,0.1); +#65124 = AXIS2_PLACEMENT_3D('',#65125,#65126,#65127); +#65125 = CARTESIAN_POINT('',(-1.25,0.55,2.4)); +#65126 = DIRECTION('',(1.,0.,0.)); +#65127 = DIRECTION('',(0.,-1.11E-15,1.)); +#65128 = ADVANCED_FACE('',(#65129),#65140,.T.); +#65129 = FACE_BOUND('',#65130,.T.); +#65130 = EDGE_LOOP('',(#65131,#65132,#65139)); +#65131 = ORIENTED_EDGE('',*,*,#64985,.F.); +#65132 = ORIENTED_EDGE('',*,*,#65133,.T.); +#65133 = EDGE_CURVE('',#64978,#64944,#65134,.T.); +#65134 = CIRCLE('',#65135,0.1); +#65135 = AXIS2_PLACEMENT_3D('',#65136,#65137,#65138); +#65136 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#65137 = DIRECTION('',(-6.E-17,1.,0.)); +#65138 = DIRECTION('',(1.,6.E-17,0.)); +#65139 = ORIENTED_EDGE('',*,*,#64943,.F.); +#65140 = SPHERICAL_SURFACE('',#65141,0.1); +#65141 = AXIS2_PLACEMENT_3D('',#65142,#65143,#65144); +#65142 = CARTESIAN_POINT('',(1.25,0.55,2.4)); +#65143 = DIRECTION('',(-0.,-0.,-1.)); +#65144 = DIRECTION('',(0.,1.,-0.)); +#65145 = ADVANCED_FACE('',(#65146),#65171,.T.); +#65146 = FACE_BOUND('',#65147,.T.); +#65147 = EDGE_LOOP('',(#65148,#65158,#65164,#65165)); +#65148 = ORIENTED_EDGE('',*,*,#65149,.F.); +#65149 = EDGE_CURVE('',#65150,#65152,#65154,.T.); +#65150 = VERTEX_POINT('',#65151); +#65151 = CARTESIAN_POINT('',(1.25,-0.55,2.5)); +#65152 = VERTEX_POINT('',#65153); +#65153 = CARTESIAN_POINT('',(-1.25,-0.55,2.5)); +#65154 = LINE('',#65155,#65156); +#65155 = CARTESIAN_POINT('',(1.35,-0.55,2.5)); +#65156 = VECTOR('',#65157,1.); +#65157 = DIRECTION('',(-1.,0.,0.)); +#65158 = ORIENTED_EDGE('',*,*,#65159,.F.); +#65159 = EDGE_CURVE('',#64978,#65150,#65160,.T.); +#65160 = LINE('',#65161,#65162); +#65161 = CARTESIAN_POINT('',(1.25,0.65,2.5)); +#65162 = VECTOR('',#65163,1.); +#65163 = DIRECTION('',(0.,-1.,0.)); +#65164 = ORIENTED_EDGE('',*,*,#64977,.F.); +#65165 = ORIENTED_EDGE('',*,*,#65166,.F.); +#65166 = EDGE_CURVE('',#65152,#64969,#65167,.T.); +#65167 = LINE('',#65168,#65169); +#65168 = CARTESIAN_POINT('',(-1.25,-0.65,2.5)); +#65169 = VECTOR('',#65170,1.); +#65170 = DIRECTION('',(0.,1.,0.)); +#65171 = PLANE('',#65172); +#65172 = AXIS2_PLACEMENT_3D('',#65173,#65174,#65175); +#65173 = CARTESIAN_POINT('',(3.E-17,0.,2.5)); +#65174 = DIRECTION('',(0.,0.,1.)); +#65175 = DIRECTION('',(1.,0.,-0.)); +#65176 = ADVANCED_FACE('',(#65177),#65189,.T.); +#65177 = FACE_BOUND('',#65178,.T.); +#65178 = EDGE_LOOP('',(#65179,#65186,#65187,#65188)); +#65179 = ORIENTED_EDGE('',*,*,#65180,.F.); +#65180 = EDGE_CURVE('',#65152,#65002,#65181,.T.); +#65181 = CIRCLE('',#65182,0.1); +#65182 = AXIS2_PLACEMENT_3D('',#65183,#65184,#65185); +#65183 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65184 = DIRECTION('',(6.E-17,-1.,0.)); +#65185 = DIRECTION('',(-1.,-6.E-17,0.)); +#65186 = ORIENTED_EDGE('',*,*,#65166,.T.); +#65187 = ORIENTED_EDGE('',*,*,#65117,.F.); +#65188 = ORIENTED_EDGE('',*,*,#65009,.F.); +#65189 = CYLINDRICAL_SURFACE('',#65190,0.1); +#65190 = AXIS2_PLACEMENT_3D('',#65191,#65192,#65193); +#65191 = CARTESIAN_POINT('',(-1.25,-0.65,2.4)); +#65192 = DIRECTION('',(0.,1.,0.)); +#65193 = DIRECTION('',(-1.,0.,0.)); +#65194 = ADVANCED_FACE('',(#65195),#65207,.T.); +#65195 = FACE_BOUND('',#65196,.T.); +#65196 = EDGE_LOOP('',(#65197,#65198,#65199,#65206)); +#65197 = ORIENTED_EDGE('',*,*,#65133,.F.); +#65198 = ORIENTED_EDGE('',*,*,#65159,.T.); +#65199 = ORIENTED_EDGE('',*,*,#65200,.F.); +#65200 = EDGE_CURVE('',#65027,#65150,#65201,.T.); +#65201 = CIRCLE('',#65202,0.1); +#65202 = AXIS2_PLACEMENT_3D('',#65203,#65204,#65205); +#65203 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65204 = DIRECTION('',(-0.,-1.,-6.E-17)); +#65205 = DIRECTION('',(0.,-6.E-17,1.)); +#65206 = ORIENTED_EDGE('',*,*,#65026,.F.); +#65207 = CYLINDRICAL_SURFACE('',#65208,0.1); +#65208 = AXIS2_PLACEMENT_3D('',#65209,#65210,#65211); +#65209 = CARTESIAN_POINT('',(1.25,0.65,2.4)); +#65210 = DIRECTION('',(0.,-1.,0.)); +#65211 = DIRECTION('',(1.,0.,0.)); +#65212 = ADVANCED_FACE('',(#65213),#65224,.T.); +#65213 = FACE_BOUND('',#65214,.T.); +#65214 = EDGE_LOOP('',(#65215,#65222,#65223)); +#65215 = ORIENTED_EDGE('',*,*,#65216,.F.); +#65216 = EDGE_CURVE('',#65152,#65049,#65217,.T.); +#65217 = CIRCLE('',#65218,0.1); +#65218 = AXIS2_PLACEMENT_3D('',#65219,#65220,#65221); +#65219 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65220 = DIRECTION('',(1.,0.,0.)); +#65221 = DIRECTION('',(0.,-1.,0.)); +#65222 = ORIENTED_EDGE('',*,*,#65180,.T.); +#65223 = ORIENTED_EDGE('',*,*,#65056,.F.); +#65224 = SPHERICAL_SURFACE('',#65225,0.1); +#65225 = AXIS2_PLACEMENT_3D('',#65226,#65227,#65228); +#65226 = CARTESIAN_POINT('',(-1.25,-0.55,2.4)); +#65227 = DIRECTION('',(-0.,-0.,-1.)); +#65228 = DIRECTION('',(0.,-1.,0.)); +#65229 = ADVANCED_FACE('',(#65230),#65241,.T.); +#65230 = FACE_BOUND('',#65231,.T.); +#65231 = EDGE_LOOP('',(#65232,#65233,#65234)); +#65232 = ORIENTED_EDGE('',*,*,#65074,.F.); +#65233 = ORIENTED_EDGE('',*,*,#65200,.T.); +#65234 = ORIENTED_EDGE('',*,*,#65235,.F.); +#65235 = EDGE_CURVE('',#65075,#65150,#65236,.T.); +#65236 = CIRCLE('',#65237,0.1); +#65237 = AXIS2_PLACEMENT_3D('',#65238,#65239,#65240); +#65238 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65239 = DIRECTION('',(-1.,0.,0.)); +#65240 = DIRECTION('',(0.,-1.,0.)); +#65241 = SPHERICAL_SURFACE('',#65242,0.1); +#65242 = AXIS2_PLACEMENT_3D('',#65243,#65244,#65245); +#65243 = CARTESIAN_POINT('',(1.25,-0.55,2.4)); +#65244 = DIRECTION('',(-1.,-0.,-0.)); +#65245 = DIRECTION('',(0.,-1.,0.)); +#65246 = ADVANCED_FACE('',(#65247),#65253,.T.); +#65247 = FACE_BOUND('',#65248,.T.); +#65248 = EDGE_LOOP('',(#65249,#65250,#65251,#65252)); +#65249 = ORIENTED_EDGE('',*,*,#65100,.F.); +#65250 = ORIENTED_EDGE('',*,*,#65235,.T.); +#65251 = ORIENTED_EDGE('',*,*,#65149,.T.); +#65252 = ORIENTED_EDGE('',*,*,#65216,.T.); +#65253 = CYLINDRICAL_SURFACE('',#65254,0.1); +#65254 = AXIS2_PLACEMENT_3D('',#65255,#65256,#65257); +#65255 = CARTESIAN_POINT('',(1.35,-0.55,2.4)); +#65256 = DIRECTION('',(-1.,0.,0.)); +#65257 = DIRECTION('',(0.,-1.,0.)); +#65258 = MANIFOLD_SOLID_BREP('',#65259); +#65259 = CLOSED_SHELL('',(#65260,#65300,#65381,#65406,#65430,#65496, + #65513,#65530,#65547,#65564,#65581,#65598)); +#65260 = ADVANCED_FACE('',(#65261),#65295,.F.); +#65261 = FACE_BOUND('',#65262,.F.); +#65262 = EDGE_LOOP('',(#65263,#65273,#65281,#65289)); +#65263 = ORIENTED_EDGE('',*,*,#65264,.F.); +#65264 = EDGE_CURVE('',#65265,#65267,#65269,.T.); +#65265 = VERTEX_POINT('',#65266); +#65266 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65267 = VERTEX_POINT('',#65268); +#65268 = CARTESIAN_POINT('',(-3.562132034356,0.3,-5.E-02)); +#65269 = LINE('',#65270,#65271); +#65270 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65271 = VECTOR('',#65272,1.); +#65272 = DIRECTION('',(1.,0.,0.)); +#65273 = ORIENTED_EDGE('',*,*,#65274,.T.); +#65274 = EDGE_CURVE('',#65265,#65275,#65277,.T.); +#65275 = VERTEX_POINT('',#65276); +#65276 = CARTESIAN_POINT('',(-4.,-0.3,-5.E-02)); +#65277 = LINE('',#65278,#65279); +#65278 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65279 = VECTOR('',#65280,1.); +#65280 = DIRECTION('',(0.,-1.,2.2E-16)); +#65281 = ORIENTED_EDGE('',*,*,#65282,.T.); +#65282 = EDGE_CURVE('',#65275,#65283,#65285,.T.); +#65283 = VERTEX_POINT('',#65284); +#65284 = CARTESIAN_POINT('',(-3.562132034356,-0.3,-5.E-02)); +#65285 = LINE('',#65286,#65287); +#65286 = CARTESIAN_POINT('',(-4.,-0.3,-5.E-02)); +#65287 = VECTOR('',#65288,1.); +#65288 = DIRECTION('',(1.,0.,0.)); +#65289 = ORIENTED_EDGE('',*,*,#65290,.F.); +#65290 = EDGE_CURVE('',#65267,#65283,#65291,.T.); +#65291 = LINE('',#65292,#65293); +#65292 = CARTESIAN_POINT('',(-3.562132034356,0.3,-5.E-02)); +#65293 = VECTOR('',#65294,1.); +#65294 = DIRECTION('',(0.,-1.,2.2E-16)); +#65295 = PLANE('',#65296); +#65296 = AXIS2_PLACEMENT_3D('',#65297,#65298,#65299); +#65297 = CARTESIAN_POINT('',(-4.,0.3,-5.E-02)); +#65298 = DIRECTION('',(0.,2.2E-16,1.)); +#65299 = DIRECTION('',(1.,0.,-0.)); +#65300 = ADVANCED_FACE('',(#65301),#65376,.T.); +#65301 = FACE_BOUND('',#65302,.T.); +#65302 = EDGE_LOOP('',(#65303,#65304,#65312,#65320,#65328,#65337,#65345, + #65353,#65361,#65369)); +#65303 = ORIENTED_EDGE('',*,*,#65264,.F.); +#65304 = ORIENTED_EDGE('',*,*,#65305,.F.); +#65305 = EDGE_CURVE('',#65306,#65265,#65308,.T.); +#65306 = VERTEX_POINT('',#65307); +#65307 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65308 = LINE('',#65309,#65310); +#65309 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65310 = VECTOR('',#65311,1.); +#65311 = DIRECTION('',(0.,2.2E-16,-1.)); +#65312 = ORIENTED_EDGE('',*,*,#65313,.T.); +#65313 = EDGE_CURVE('',#65306,#65314,#65316,.T.); +#65314 = VERTEX_POINT('',#65315); +#65315 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65316 = LINE('',#65317,#65318); +#65317 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65318 = VECTOR('',#65319,1.); +#65319 = DIRECTION('',(1.,0.,0.)); +#65320 = ORIENTED_EDGE('',*,*,#65321,.T.); +#65321 = EDGE_CURVE('',#65314,#65322,#65324,.T.); +#65322 = VERTEX_POINT('',#65323); +#65323 = CARTESIAN_POINT('',(-3.273933982822,0.3,0.456066017178)); +#65324 = LINE('',#65325,#65326); +#65325 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65326 = VECTOR('',#65327,1.); +#65327 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65328 = ORIENTED_EDGE('',*,*,#65329,.F.); +#65329 = EDGE_CURVE('',#65330,#65322,#65332,.T.); +#65330 = VERTEX_POINT('',#65331); +#65331 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.5)); +#65332 = CIRCLE('',#65333,0.15); +#65333 = AXIS2_PLACEMENT_3D('',#65334,#65335,#65336); +#65334 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.35)); +#65335 = DIRECTION('',(0.,-1.,2.2E-16)); +#65336 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65337 = ORIENTED_EDGE('',*,*,#65338,.T.); +#65338 = EDGE_CURVE('',#65330,#65339,#65341,.T.); +#65339 = VERTEX_POINT('',#65340); +#65340 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65341 = LINE('',#65342,#65343); +#65342 = CARTESIAN_POINT('',(-3.23,0.3,0.5)); +#65343 = VECTOR('',#65344,1.); +#65344 = DIRECTION('',(1.,0.,0.)); +#65345 = ORIENTED_EDGE('',*,*,#65346,.T.); +#65346 = EDGE_CURVE('',#65339,#65347,#65349,.T.); +#65347 = VERTEX_POINT('',#65348); +#65348 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65349 = LINE('',#65350,#65351); +#65350 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65351 = VECTOR('',#65352,1.); +#65352 = DIRECTION('',(0.,2.2E-16,-1.)); +#65353 = ORIENTED_EDGE('',*,*,#65354,.T.); +#65354 = EDGE_CURVE('',#65347,#65355,#65357,.T.); +#65355 = VERTEX_POINT('',#65356); +#65356 = CARTESIAN_POINT('',(-3.15,0.3,0.3)); +#65357 = LINE('',#65358,#65359); +#65358 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65359 = VECTOR('',#65360,1.); +#65360 = DIRECTION('',(-1.,0.,0.)); +#65361 = ORIENTED_EDGE('',*,*,#65362,.F.); +#65362 = EDGE_CURVE('',#65363,#65355,#65365,.T.); +#65363 = VERTEX_POINT('',#65364); +#65364 = CARTESIAN_POINT('',(-3.456066017178,0.3,-6.066017177982E-03)); +#65365 = LINE('',#65366,#65367); +#65366 = CARTESIAN_POINT('',(-3.5,0.3,-5.E-02)); +#65367 = VECTOR('',#65368,1.); +#65368 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65369 = ORIENTED_EDGE('',*,*,#65370,.F.); +#65370 = EDGE_CURVE('',#65267,#65363,#65371,.T.); +#65371 = CIRCLE('',#65372,0.15); +#65372 = AXIS2_PLACEMENT_3D('',#65373,#65374,#65375); +#65373 = CARTESIAN_POINT('',(-3.562132034356,0.3,0.1)); +#65374 = DIRECTION('',(0.,-1.,2.2E-16)); +#65375 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65376 = PLANE('',#65377); +#65377 = AXIS2_PLACEMENT_3D('',#65378,#65379,#65380); +#65378 = CARTESIAN_POINT('',(-3.507087712869,0.3,0.181755913475)); +#65379 = DIRECTION('',(0.,1.,0.)); +#65380 = DIRECTION('',(0.,-0.,1.)); +#65381 = ADVANCED_FACE('',(#65382),#65401,.T.); +#65382 = FACE_BOUND('',#65383,.T.); +#65383 = EDGE_LOOP('',(#65384,#65385,#65393,#65400)); +#65384 = ORIENTED_EDGE('',*,*,#65370,.T.); +#65385 = ORIENTED_EDGE('',*,*,#65386,.T.); +#65386 = EDGE_CURVE('',#65363,#65387,#65389,.T.); +#65387 = VERTEX_POINT('',#65388); +#65388 = CARTESIAN_POINT('',(-3.456066017178,-0.3,-6.066017177982E-03)); +#65389 = LINE('',#65390,#65391); +#65390 = CARTESIAN_POINT('',(-3.456066017178,0.3,-6.066017177982E-03)); +#65391 = VECTOR('',#65392,1.); +#65392 = DIRECTION('',(0.,-1.,2.2E-16)); +#65393 = ORIENTED_EDGE('',*,*,#65394,.F.); +#65394 = EDGE_CURVE('',#65283,#65387,#65395,.T.); +#65395 = CIRCLE('',#65396,0.15); +#65396 = AXIS2_PLACEMENT_3D('',#65397,#65398,#65399); +#65397 = CARTESIAN_POINT('',(-3.562132034356,-0.3,0.1)); +#65398 = DIRECTION('',(0.,-1.,2.2E-16)); +#65399 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65400 = ORIENTED_EDGE('',*,*,#65290,.F.); +#65401 = CYLINDRICAL_SURFACE('',#65402,0.15); +#65402 = AXIS2_PLACEMENT_3D('',#65403,#65404,#65405); +#65403 = CARTESIAN_POINT('',(-3.562132034356,0.3,0.1)); +#65404 = DIRECTION('',(0.,-1.,2.2E-16)); +#65405 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65406 = ADVANCED_FACE('',(#65407),#65425,.F.); +#65407 = FACE_BOUND('',#65408,.F.); +#65408 = EDGE_LOOP('',(#65409,#65417,#65423,#65424)); +#65409 = ORIENTED_EDGE('',*,*,#65410,.T.); +#65410 = EDGE_CURVE('',#65306,#65411,#65413,.T.); +#65411 = VERTEX_POINT('',#65412); +#65412 = CARTESIAN_POINT('',(-4.,-0.3,0.15)); +#65413 = LINE('',#65414,#65415); +#65414 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65415 = VECTOR('',#65416,1.); +#65416 = DIRECTION('',(0.,-1.,2.2E-16)); +#65417 = ORIENTED_EDGE('',*,*,#65418,.T.); +#65418 = EDGE_CURVE('',#65411,#65275,#65419,.T.); +#65419 = LINE('',#65420,#65421); +#65420 = CARTESIAN_POINT('',(-4.,-0.3,0.15)); +#65421 = VECTOR('',#65422,1.); +#65422 = DIRECTION('',(0.,2.2E-16,-1.)); +#65423 = ORIENTED_EDGE('',*,*,#65274,.F.); +#65424 = ORIENTED_EDGE('',*,*,#65305,.F.); +#65425 = PLANE('',#65426); +#65426 = AXIS2_PLACEMENT_3D('',#65427,#65428,#65429); +#65427 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65428 = DIRECTION('',(1.,0.,0.)); +#65429 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65430 = ADVANCED_FACE('',(#65431),#65491,.F.); +#65431 = FACE_BOUND('',#65432,.F.); +#65432 = EDGE_LOOP('',(#65433,#65434,#65435,#65443,#65451,#65460,#65468, + #65476,#65484,#65490)); +#65433 = ORIENTED_EDGE('',*,*,#65282,.F.); +#65434 = ORIENTED_EDGE('',*,*,#65418,.F.); +#65435 = ORIENTED_EDGE('',*,*,#65436,.T.); +#65436 = EDGE_CURVE('',#65411,#65437,#65439,.T.); +#65437 = VERTEX_POINT('',#65438); +#65438 = CARTESIAN_POINT('',(-3.58,-0.3,0.15)); +#65439 = LINE('',#65440,#65441); +#65440 = CARTESIAN_POINT('',(-4.,-0.3,0.15)); +#65441 = VECTOR('',#65442,1.); +#65442 = DIRECTION('',(1.,0.,0.)); +#65443 = ORIENTED_EDGE('',*,*,#65444,.T.); +#65444 = EDGE_CURVE('',#65437,#65445,#65447,.T.); +#65445 = VERTEX_POINT('',#65446); +#65446 = CARTESIAN_POINT('',(-3.273933982822,-0.3,0.456066017178)); +#65447 = LINE('',#65448,#65449); +#65448 = CARTESIAN_POINT('',(-3.58,-0.3,0.15)); +#65449 = VECTOR('',#65450,1.); +#65450 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65451 = ORIENTED_EDGE('',*,*,#65452,.F.); +#65452 = EDGE_CURVE('',#65453,#65445,#65455,.T.); +#65453 = VERTEX_POINT('',#65454); +#65454 = CARTESIAN_POINT('',(-3.167867965644,-0.3,0.5)); +#65455 = CIRCLE('',#65456,0.15); +#65456 = AXIS2_PLACEMENT_3D('',#65457,#65458,#65459); +#65457 = CARTESIAN_POINT('',(-3.167867965644,-0.3,0.35)); +#65458 = DIRECTION('',(0.,-1.,2.2E-16)); +#65459 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65460 = ORIENTED_EDGE('',*,*,#65461,.T.); +#65461 = EDGE_CURVE('',#65453,#65462,#65464,.T.); +#65462 = VERTEX_POINT('',#65463); +#65463 = CARTESIAN_POINT('',(-3.05,-0.3,0.5)); +#65464 = LINE('',#65465,#65466); +#65465 = CARTESIAN_POINT('',(-3.23,-0.3,0.5)); +#65466 = VECTOR('',#65467,1.); +#65467 = DIRECTION('',(1.,0.,0.)); +#65468 = ORIENTED_EDGE('',*,*,#65469,.T.); +#65469 = EDGE_CURVE('',#65462,#65470,#65472,.T.); +#65470 = VERTEX_POINT('',#65471); +#65471 = CARTESIAN_POINT('',(-3.05,-0.3,0.3)); +#65472 = LINE('',#65473,#65474); +#65473 = CARTESIAN_POINT('',(-3.05,-0.3,0.5)); +#65474 = VECTOR('',#65475,1.); +#65475 = DIRECTION('',(0.,2.2E-16,-1.)); +#65476 = ORIENTED_EDGE('',*,*,#65477,.T.); +#65477 = EDGE_CURVE('',#65470,#65478,#65480,.T.); +#65478 = VERTEX_POINT('',#65479); +#65479 = CARTESIAN_POINT('',(-3.15,-0.3,0.3)); +#65480 = LINE('',#65481,#65482); +#65481 = CARTESIAN_POINT('',(-3.05,-0.3,0.3)); +#65482 = VECTOR('',#65483,1.); +#65483 = DIRECTION('',(-1.,0.,0.)); +#65484 = ORIENTED_EDGE('',*,*,#65485,.F.); +#65485 = EDGE_CURVE('',#65387,#65478,#65486,.T.); +#65486 = LINE('',#65487,#65488); +#65487 = CARTESIAN_POINT('',(-3.5,-0.3,-5.E-02)); +#65488 = VECTOR('',#65489,1.); +#65489 = DIRECTION('',(0.707106781187,-1.599999999999E-16,0.707106781187 + )); +#65490 = ORIENTED_EDGE('',*,*,#65394,.F.); +#65491 = PLANE('',#65492); +#65492 = AXIS2_PLACEMENT_3D('',#65493,#65494,#65495); +#65493 = CARTESIAN_POINT('',(-3.507087712869,-0.3,0.181755913475)); +#65494 = DIRECTION('',(0.,1.,0.)); +#65495 = DIRECTION('',(0.,-0.,1.)); +#65496 = ADVANCED_FACE('',(#65497),#65508,.F.); +#65497 = FACE_BOUND('',#65498,.F.); +#65498 = EDGE_LOOP('',(#65499,#65500,#65501,#65502)); +#65499 = ORIENTED_EDGE('',*,*,#65362,.F.); +#65500 = ORIENTED_EDGE('',*,*,#65386,.T.); +#65501 = ORIENTED_EDGE('',*,*,#65485,.T.); +#65502 = ORIENTED_EDGE('',*,*,#65503,.F.); +#65503 = EDGE_CURVE('',#65355,#65478,#65504,.T.); +#65504 = LINE('',#65505,#65506); +#65505 = CARTESIAN_POINT('',(-3.15,0.3,0.3)); +#65506 = VECTOR('',#65507,1.); +#65507 = DIRECTION('',(0.,-1.,2.2E-16)); +#65508 = PLANE('',#65509); +#65509 = AXIS2_PLACEMENT_3D('',#65510,#65511,#65512); +#65510 = CARTESIAN_POINT('',(-3.5,0.3,-5.E-02)); +#65511 = DIRECTION('',(-0.707106781187,1.599999999999E-16,0.707106781187 + )); +#65512 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#65513 = ADVANCED_FACE('',(#65514),#65525,.T.); +#65514 = FACE_BOUND('',#65515,.T.); +#65515 = EDGE_LOOP('',(#65516,#65517,#65518,#65524)); +#65516 = ORIENTED_EDGE('',*,*,#65410,.T.); +#65517 = ORIENTED_EDGE('',*,*,#65436,.T.); +#65518 = ORIENTED_EDGE('',*,*,#65519,.F.); +#65519 = EDGE_CURVE('',#65314,#65437,#65520,.T.); +#65520 = LINE('',#65521,#65522); +#65521 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65522 = VECTOR('',#65523,1.); +#65523 = DIRECTION('',(0.,-1.,2.2E-16)); +#65524 = ORIENTED_EDGE('',*,*,#65313,.F.); +#65525 = PLANE('',#65526); +#65526 = AXIS2_PLACEMENT_3D('',#65527,#65528,#65529); +#65527 = CARTESIAN_POINT('',(-4.,0.3,0.15)); +#65528 = DIRECTION('',(0.,2.2E-16,1.)); +#65529 = DIRECTION('',(1.,0.,-0.)); +#65530 = ADVANCED_FACE('',(#65531),#65542,.T.); +#65531 = FACE_BOUND('',#65532,.T.); +#65532 = EDGE_LOOP('',(#65533,#65539,#65540,#65541)); +#65533 = ORIENTED_EDGE('',*,*,#65534,.T.); +#65534 = EDGE_CURVE('',#65347,#65470,#65535,.T.); +#65535 = LINE('',#65536,#65537); +#65536 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65537 = VECTOR('',#65538,1.); +#65538 = DIRECTION('',(0.,-1.,2.2E-16)); +#65539 = ORIENTED_EDGE('',*,*,#65477,.T.); +#65540 = ORIENTED_EDGE('',*,*,#65503,.F.); +#65541 = ORIENTED_EDGE('',*,*,#65354,.F.); +#65542 = PLANE('',#65543); +#65543 = AXIS2_PLACEMENT_3D('',#65544,#65545,#65546); +#65544 = CARTESIAN_POINT('',(-3.05,0.3,0.3)); +#65545 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65546 = DIRECTION('',(-1.,-0.,0.)); +#65547 = ADVANCED_FACE('',(#65548),#65559,.T.); +#65548 = FACE_BOUND('',#65549,.T.); +#65549 = EDGE_LOOP('',(#65550,#65551,#65552,#65553)); +#65550 = ORIENTED_EDGE('',*,*,#65321,.F.); +#65551 = ORIENTED_EDGE('',*,*,#65519,.T.); +#65552 = ORIENTED_EDGE('',*,*,#65444,.T.); +#65553 = ORIENTED_EDGE('',*,*,#65554,.F.); +#65554 = EDGE_CURVE('',#65322,#65445,#65555,.T.); +#65555 = LINE('',#65556,#65557); +#65556 = CARTESIAN_POINT('',(-3.273933982822,0.3,0.456066017178)); +#65557 = VECTOR('',#65558,1.); +#65558 = DIRECTION('',(0.,-1.,2.2E-16)); +#65559 = PLANE('',#65560); +#65560 = AXIS2_PLACEMENT_3D('',#65561,#65562,#65563); +#65561 = CARTESIAN_POINT('',(-3.58,0.3,0.15)); +#65562 = DIRECTION('',(-0.707106781187,1.599999999999E-16,0.707106781187 + )); +#65563 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#65564 = ADVANCED_FACE('',(#65565),#65576,.T.); +#65565 = FACE_BOUND('',#65566,.T.); +#65566 = EDGE_LOOP('',(#65567,#65573,#65574,#65575)); +#65567 = ORIENTED_EDGE('',*,*,#65568,.T.); +#65568 = EDGE_CURVE('',#65339,#65462,#65569,.T.); +#65569 = LINE('',#65570,#65571); +#65570 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65571 = VECTOR('',#65572,1.); +#65572 = DIRECTION('',(0.,-1.,2.2E-16)); +#65573 = ORIENTED_EDGE('',*,*,#65469,.T.); +#65574 = ORIENTED_EDGE('',*,*,#65534,.F.); +#65575 = ORIENTED_EDGE('',*,*,#65346,.F.); +#65576 = PLANE('',#65577); +#65577 = AXIS2_PLACEMENT_3D('',#65578,#65579,#65580); +#65578 = CARTESIAN_POINT('',(-3.05,0.3,0.5)); +#65579 = DIRECTION('',(1.,0.,0.)); +#65580 = DIRECTION('',(0.,-2.2E-16,-1.)); +#65581 = ADVANCED_FACE('',(#65582),#65593,.T.); +#65582 = FACE_BOUND('',#65583,.T.); +#65583 = EDGE_LOOP('',(#65584,#65585,#65586,#65587)); +#65584 = ORIENTED_EDGE('',*,*,#65329,.T.); +#65585 = ORIENTED_EDGE('',*,*,#65554,.T.); +#65586 = ORIENTED_EDGE('',*,*,#65452,.F.); +#65587 = ORIENTED_EDGE('',*,*,#65588,.F.); +#65588 = EDGE_CURVE('',#65330,#65453,#65589,.T.); +#65589 = LINE('',#65590,#65591); +#65590 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.5)); +#65591 = VECTOR('',#65592,1.); +#65592 = DIRECTION('',(0.,-1.,2.2E-16)); +#65593 = CYLINDRICAL_SURFACE('',#65594,0.15); +#65594 = AXIS2_PLACEMENT_3D('',#65595,#65596,#65597); +#65595 = CARTESIAN_POINT('',(-3.167867965644,0.3,0.35)); +#65596 = DIRECTION('',(0.,-1.,2.2E-16)); +#65597 = DIRECTION('',(0.,2.2E-16,1.)); +#65598 = ADVANCED_FACE('',(#65599),#65605,.T.); +#65599 = FACE_BOUND('',#65600,.T.); +#65600 = EDGE_LOOP('',(#65601,#65602,#65603,#65604)); +#65601 = ORIENTED_EDGE('',*,*,#65338,.F.); +#65602 = ORIENTED_EDGE('',*,*,#65588,.T.); +#65603 = ORIENTED_EDGE('',*,*,#65461,.T.); +#65604 = ORIENTED_EDGE('',*,*,#65568,.F.); +#65605 = PLANE('',#65606); +#65606 = AXIS2_PLACEMENT_3D('',#65607,#65608,#65609); +#65607 = CARTESIAN_POINT('',(-3.23,0.3,0.5)); +#65608 = DIRECTION('',(0.,2.2E-16,1.)); +#65609 = DIRECTION('',(1.,0.,-0.)); +#65610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65614)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#65611,#65612,#65613)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#65611 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#65612 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#65613 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#65614 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-04),#65611, + 'distance_accuracy_value','confusion accuracy'); +#65615 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65616,#65618); +#65616 = ( REPRESENTATION_RELATIONSHIP('','',#58709,#58686) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65617) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65617 = ITEM_DEFINED_TRANSFORMATION('','',#11,#58687); +#65618 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65619); +#65619 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('64','=>[0:1:1:37]','',#58681, + #58704,$); +#65620 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#58706)); +#65621 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65622,#65624); +#65622 = ( REPRESENTATION_RELATIONSHIP('','',#43616,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65623) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65623 = ITEM_DEFINED_TRANSFORMATION('','',#11,#203); +#65624 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65625); +#65625 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('66','J8','',#5,#43611,$); +#65626 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65627,#65629); +#65627 = ( REPRESENTATION_RELATIONSHIP('','',#15643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65628) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65628 = ITEM_DEFINED_TRANSFORMATION('','',#11,#207); +#65629 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65630); +#65630 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('67','U2','',#5,#15638,$); +#65631 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65632,#65634); +#65632 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65633) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65633 = ITEM_DEFINED_TRANSFORMATION('','',#11,#211); +#65634 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65635); +#65635 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('68','RB4','',#5,#523,$); +#65636 = SHAPE_DEFINITION_REPRESENTATION(#65637,#65643); +#65637 = PRODUCT_DEFINITION_SHAPE('','',#65638); +#65638 = PRODUCT_DEFINITION('design','',#65639,#65642); +#65639 = PRODUCT_DEFINITION_FORMATION('','',#65640); +#65640 = PRODUCT('C_1210_3225Metric','C_1210_3225Metric','',(#65641)); +#65641 = PRODUCT_CONTEXT('',#2,'mechanical'); +#65642 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#65643 = SHAPE_REPRESENTATION('',(#11,#65644),#65648); +#65644 = AXIS2_PLACEMENT_3D('',#65645,#65646,#65647); +#65645 = CARTESIAN_POINT('',(0.,0.,0.)); +#65646 = DIRECTION('',(0.,0.,1.)); +#65647 = DIRECTION('',(1.,0.,-0.)); +#65648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65652)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#65649,#65650,#65651)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#65649 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#65650 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#65651 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#65652 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#65649, + 'distance_accuracy_value','confusion accuracy'); +#65653 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#65654,#65656); +#65654 = ( REPRESENTATION_RELATIONSHIP('','',#65643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#65655) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#65655 = ITEM_DEFINED_TRANSFORMATION('','',#11,#215); +#65656 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #65657); +#65657 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('70','C22','',#5,#65638,$); +#65658 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#65640)); +#65659 = SHAPE_DEFINITION_REPRESENTATION(#65660,#65666); +#65660 = PRODUCT_DEFINITION_SHAPE('','',#65661); +#65661 = PRODUCT_DEFINITION('design','',#65662,#65665); +#65662 = PRODUCT_DEFINITION_FORMATION('','',#65663); +#65663 = PRODUCT('C_1210_3225Metric','C_1210_3225Metric','',(#65664)); +#65664 = PRODUCT_CONTEXT('',#2,'mechanical'); +#65665 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#65666 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#65667),#66521); +#65667 = MANIFOLD_SOLID_BREP('',#65668); +#65668 = CLOSED_SHELL('',(#65669,#65745,#65776,#65801,#65826,#65850, + #65874,#65899,#65924,#65941,#66027,#66059,#66083,#66108,#66132, + #66157,#66181,#66206,#66223,#66309,#66340,#66365,#66390,#66414, + #66438,#66463,#66488,#66505)); +#65669 = ADVANCED_FACE('',(#65670),#65740,.F.); +#65670 = FACE_BOUND('',#65671,.F.); +#65671 = EDGE_LOOP('',(#65672,#65682,#65691,#65699,#65708,#65716,#65725, + #65733)); +#65672 = ORIENTED_EDGE('',*,*,#65673,.F.); +#65673 = EDGE_CURVE('',#65674,#65676,#65678,.T.); +#65674 = VERTEX_POINT('',#65675); +#65675 = CARTESIAN_POINT('',(-1.6,-1.25,4.E-02)); +#65676 = VERTEX_POINT('',#65677); +#65677 = CARTESIAN_POINT('',(-1.6,-1.25,2.46)); +#65678 = LINE('',#65679,#65680); +#65679 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65680 = VECTOR('',#65681,1.); +#65681 = DIRECTION('',(0.,0.,1.)); +#65682 = ORIENTED_EDGE('',*,*,#65683,.T.); +#65683 = EDGE_CURVE('',#65674,#65684,#65686,.T.); +#65684 = VERTEX_POINT('',#65685); +#65685 = CARTESIAN_POINT('',(-1.6,-1.21,0.)); +#65686 = CIRCLE('',#65687,4.E-02); +#65687 = AXIS2_PLACEMENT_3D('',#65688,#65689,#65690); +#65688 = CARTESIAN_POINT('',(-1.6,-1.21,4.E-02)); +#65689 = DIRECTION('',(1.,0.,-0.)); +#65690 = DIRECTION('',(0.,0.,1.)); +#65691 = ORIENTED_EDGE('',*,*,#65692,.T.); +#65692 = EDGE_CURVE('',#65684,#65693,#65695,.T.); +#65693 = VERTEX_POINT('',#65694); +#65694 = CARTESIAN_POINT('',(-1.6,1.21,0.)); +#65695 = LINE('',#65696,#65697); +#65696 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65697 = VECTOR('',#65698,1.); +#65698 = DIRECTION('',(0.,1.,0.)); +#65699 = ORIENTED_EDGE('',*,*,#65700,.F.); +#65700 = EDGE_CURVE('',#65701,#65693,#65703,.T.); +#65701 = VERTEX_POINT('',#65702); +#65702 = CARTESIAN_POINT('',(-1.6,1.25,4.E-02)); +#65703 = CIRCLE('',#65704,4.E-02); +#65704 = AXIS2_PLACEMENT_3D('',#65705,#65706,#65707); +#65705 = CARTESIAN_POINT('',(-1.6,1.21,4.E-02)); +#65706 = DIRECTION('',(-1.,0.,0.)); +#65707 = DIRECTION('',(0.,0.,1.)); +#65708 = ORIENTED_EDGE('',*,*,#65709,.T.); +#65709 = EDGE_CURVE('',#65701,#65710,#65712,.T.); +#65710 = VERTEX_POINT('',#65711); +#65711 = CARTESIAN_POINT('',(-1.6,1.25,2.46)); +#65712 = LINE('',#65713,#65714); +#65713 = CARTESIAN_POINT('',(-1.6,1.25,0.)); +#65714 = VECTOR('',#65715,1.); +#65715 = DIRECTION('',(0.,0.,1.)); +#65716 = ORIENTED_EDGE('',*,*,#65717,.T.); +#65717 = EDGE_CURVE('',#65710,#65718,#65720,.T.); +#65718 = VERTEX_POINT('',#65719); +#65719 = CARTESIAN_POINT('',(-1.6,1.21,2.5)); +#65720 = CIRCLE('',#65721,4.E-02); +#65721 = AXIS2_PLACEMENT_3D('',#65722,#65723,#65724); +#65722 = CARTESIAN_POINT('',(-1.6,1.21,2.46)); +#65723 = DIRECTION('',(1.,0.,-0.)); +#65724 = DIRECTION('',(0.,0.,1.)); +#65725 = ORIENTED_EDGE('',*,*,#65726,.F.); +#65726 = EDGE_CURVE('',#65727,#65718,#65729,.T.); +#65727 = VERTEX_POINT('',#65728); +#65728 = CARTESIAN_POINT('',(-1.6,-1.21,2.5)); +#65729 = LINE('',#65730,#65731); +#65730 = CARTESIAN_POINT('',(-1.6,-1.25,2.5)); +#65731 = VECTOR('',#65732,1.); +#65732 = DIRECTION('',(0.,1.,0.)); +#65733 = ORIENTED_EDGE('',*,*,#65734,.F.); +#65734 = EDGE_CURVE('',#65676,#65727,#65735,.T.); +#65735 = CIRCLE('',#65736,4.E-02); +#65736 = AXIS2_PLACEMENT_3D('',#65737,#65738,#65739); +#65737 = CARTESIAN_POINT('',(-1.6,-1.21,2.46)); +#65738 = DIRECTION('',(-1.,0.,0.)); +#65739 = DIRECTION('',(0.,0.,1.)); +#65740 = PLANE('',#65741); +#65741 = AXIS2_PLACEMENT_3D('',#65742,#65743,#65744); +#65742 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65743 = DIRECTION('',(1.,0.,0.)); +#65744 = DIRECTION('',(0.,0.,1.)); +#65745 = ADVANCED_FACE('',(#65746),#65771,.F.); +#65746 = FACE_BOUND('',#65747,.F.); +#65747 = EDGE_LOOP('',(#65748,#65758,#65764,#65765)); +#65748 = ORIENTED_EDGE('',*,*,#65749,.F.); +#65749 = EDGE_CURVE('',#65750,#65752,#65754,.T.); +#65750 = VERTEX_POINT('',#65751); +#65751 = CARTESIAN_POINT('',(-1.2,-1.25,4.E-02)); +#65752 = VERTEX_POINT('',#65753); +#65753 = CARTESIAN_POINT('',(-1.2,-1.25,2.46)); +#65754 = LINE('',#65755,#65756); +#65755 = CARTESIAN_POINT('',(-1.2,-1.25,0.)); +#65756 = VECTOR('',#65757,1.); +#65757 = DIRECTION('',(0.,0.,1.)); +#65758 = ORIENTED_EDGE('',*,*,#65759,.F.); +#65759 = EDGE_CURVE('',#65674,#65750,#65760,.T.); +#65760 = LINE('',#65761,#65762); +#65761 = CARTESIAN_POINT('',(-1.6,-1.25,4.E-02)); +#65762 = VECTOR('',#65763,1.); +#65763 = DIRECTION('',(1.,0.,0.)); +#65764 = ORIENTED_EDGE('',*,*,#65673,.T.); +#65765 = ORIENTED_EDGE('',*,*,#65766,.T.); +#65766 = EDGE_CURVE('',#65676,#65752,#65767,.T.); +#65767 = LINE('',#65768,#65769); +#65768 = CARTESIAN_POINT('',(-1.6,-1.25,2.46)); +#65769 = VECTOR('',#65770,1.); +#65770 = DIRECTION('',(1.,0.,0.)); +#65771 = PLANE('',#65772); +#65772 = AXIS2_PLACEMENT_3D('',#65773,#65774,#65775); +#65773 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65774 = DIRECTION('',(0.,1.,0.)); +#65775 = DIRECTION('',(0.,-0.,1.)); +#65776 = ADVANCED_FACE('',(#65777),#65796,.T.); +#65777 = FACE_BOUND('',#65778,.T.); +#65778 = EDGE_LOOP('',(#65779,#65780,#65788,#65795)); +#65779 = ORIENTED_EDGE('',*,*,#65683,.T.); +#65780 = ORIENTED_EDGE('',*,*,#65781,.T.); +#65781 = EDGE_CURVE('',#65684,#65782,#65784,.T.); +#65782 = VERTEX_POINT('',#65783); +#65783 = CARTESIAN_POINT('',(-1.2,-1.21,0.)); +#65784 = LINE('',#65785,#65786); +#65785 = CARTESIAN_POINT('',(-1.6,-1.21,0.)); +#65786 = VECTOR('',#65787,1.); +#65787 = DIRECTION('',(1.,0.,0.)); +#65788 = ORIENTED_EDGE('',*,*,#65789,.F.); +#65789 = EDGE_CURVE('',#65750,#65782,#65790,.T.); +#65790 = CIRCLE('',#65791,4.E-02); +#65791 = AXIS2_PLACEMENT_3D('',#65792,#65793,#65794); +#65792 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#65793 = DIRECTION('',(1.,0.,-0.)); +#65794 = DIRECTION('',(0.,0.,1.)); +#65795 = ORIENTED_EDGE('',*,*,#65759,.F.); +#65796 = CYLINDRICAL_SURFACE('',#65797,4.E-02); +#65797 = AXIS2_PLACEMENT_3D('',#65798,#65799,#65800); +#65798 = CARTESIAN_POINT('',(-1.6,-1.21,4.E-02)); +#65799 = DIRECTION('',(1.,0.,0.)); +#65800 = DIRECTION('',(0.,-1.,0.)); +#65801 = ADVANCED_FACE('',(#65802),#65821,.T.); +#65802 = FACE_BOUND('',#65803,.T.); +#65803 = EDGE_LOOP('',(#65804,#65805,#65814,#65820)); +#65804 = ORIENTED_EDGE('',*,*,#65766,.T.); +#65805 = ORIENTED_EDGE('',*,*,#65806,.T.); +#65806 = EDGE_CURVE('',#65752,#65807,#65809,.T.); +#65807 = VERTEX_POINT('',#65808); +#65808 = CARTESIAN_POINT('',(-1.2,-1.21,2.5)); +#65809 = CIRCLE('',#65810,4.E-02); +#65810 = AXIS2_PLACEMENT_3D('',#65811,#65812,#65813); +#65811 = CARTESIAN_POINT('',(-1.2,-1.21,2.46)); +#65812 = DIRECTION('',(-1.,0.,0.)); +#65813 = DIRECTION('',(0.,0.,1.)); +#65814 = ORIENTED_EDGE('',*,*,#65815,.F.); +#65815 = EDGE_CURVE('',#65727,#65807,#65816,.T.); +#65816 = LINE('',#65817,#65818); +#65817 = CARTESIAN_POINT('',(-1.6,-1.21,2.5)); +#65818 = VECTOR('',#65819,1.); +#65819 = DIRECTION('',(1.,0.,0.)); +#65820 = ORIENTED_EDGE('',*,*,#65734,.F.); +#65821 = CYLINDRICAL_SURFACE('',#65822,4.E-02); +#65822 = AXIS2_PLACEMENT_3D('',#65823,#65824,#65825); +#65823 = CARTESIAN_POINT('',(-1.6,-1.21,2.46)); +#65824 = DIRECTION('',(1.,0.,0.)); +#65825 = DIRECTION('',(0.,-1.,0.)); +#65826 = ADVANCED_FACE('',(#65827),#65845,.F.); +#65827 = FACE_BOUND('',#65828,.F.); +#65828 = EDGE_LOOP('',(#65829,#65830,#65831,#65839)); +#65829 = ORIENTED_EDGE('',*,*,#65692,.F.); +#65830 = ORIENTED_EDGE('',*,*,#65781,.T.); +#65831 = ORIENTED_EDGE('',*,*,#65832,.T.); +#65832 = EDGE_CURVE('',#65782,#65833,#65835,.T.); +#65833 = VERTEX_POINT('',#65834); +#65834 = CARTESIAN_POINT('',(-1.2,1.21,0.)); +#65835 = LINE('',#65836,#65837); +#65836 = CARTESIAN_POINT('',(-1.2,-1.25,0.)); +#65837 = VECTOR('',#65838,1.); +#65838 = DIRECTION('',(0.,1.,0.)); +#65839 = ORIENTED_EDGE('',*,*,#65840,.F.); +#65840 = EDGE_CURVE('',#65693,#65833,#65841,.T.); +#65841 = LINE('',#65842,#65843); +#65842 = CARTESIAN_POINT('',(-1.6,1.21,0.)); +#65843 = VECTOR('',#65844,1.); +#65844 = DIRECTION('',(1.,0.,0.)); +#65845 = PLANE('',#65846); +#65846 = AXIS2_PLACEMENT_3D('',#65847,#65848,#65849); +#65847 = CARTESIAN_POINT('',(-1.6,-1.25,0.)); +#65848 = DIRECTION('',(0.,0.,1.)); +#65849 = DIRECTION('',(1.,0.,-0.)); +#65850 = ADVANCED_FACE('',(#65851),#65869,.T.); +#65851 = FACE_BOUND('',#65852,.T.); +#65852 = EDGE_LOOP('',(#65853,#65854,#65855,#65863)); +#65853 = ORIENTED_EDGE('',*,*,#65726,.F.); +#65854 = ORIENTED_EDGE('',*,*,#65815,.T.); +#65855 = ORIENTED_EDGE('',*,*,#65856,.T.); +#65856 = EDGE_CURVE('',#65807,#65857,#65859,.T.); +#65857 = VERTEX_POINT('',#65858); +#65858 = CARTESIAN_POINT('',(-1.2,1.21,2.5)); +#65859 = LINE('',#65860,#65861); +#65860 = CARTESIAN_POINT('',(-1.2,-1.25,2.5)); +#65861 = VECTOR('',#65862,1.); +#65862 = DIRECTION('',(0.,1.,0.)); +#65863 = ORIENTED_EDGE('',*,*,#65864,.F.); +#65864 = EDGE_CURVE('',#65718,#65857,#65865,.T.); +#65865 = LINE('',#65866,#65867); +#65866 = CARTESIAN_POINT('',(-1.6,1.21,2.5)); +#65867 = VECTOR('',#65868,1.); +#65868 = DIRECTION('',(1.,0.,0.)); +#65869 = PLANE('',#65870); +#65870 = AXIS2_PLACEMENT_3D('',#65871,#65872,#65873); +#65871 = CARTESIAN_POINT('',(-1.6,-1.25,2.5)); +#65872 = DIRECTION('',(0.,0.,1.)); +#65873 = DIRECTION('',(1.,0.,-0.)); +#65874 = ADVANCED_FACE('',(#65875),#65894,.T.); +#65875 = FACE_BOUND('',#65876,.T.); +#65876 = EDGE_LOOP('',(#65877,#65885,#65892,#65893)); +#65877 = ORIENTED_EDGE('',*,*,#65878,.T.); +#65878 = EDGE_CURVE('',#65701,#65879,#65881,.T.); +#65879 = VERTEX_POINT('',#65880); +#65880 = CARTESIAN_POINT('',(-1.2,1.25,4.E-02)); +#65881 = LINE('',#65882,#65883); +#65882 = CARTESIAN_POINT('',(-1.6,1.25,4.E-02)); +#65883 = VECTOR('',#65884,1.); +#65884 = DIRECTION('',(1.,0.,0.)); +#65885 = ORIENTED_EDGE('',*,*,#65886,.T.); +#65886 = EDGE_CURVE('',#65879,#65833,#65887,.T.); +#65887 = CIRCLE('',#65888,4.E-02); +#65888 = AXIS2_PLACEMENT_3D('',#65889,#65890,#65891); +#65889 = CARTESIAN_POINT('',(-1.2,1.21,4.E-02)); +#65890 = DIRECTION('',(-1.,0.,0.)); +#65891 = DIRECTION('',(0.,0.,1.)); +#65892 = ORIENTED_EDGE('',*,*,#65840,.F.); +#65893 = ORIENTED_EDGE('',*,*,#65700,.F.); +#65894 = CYLINDRICAL_SURFACE('',#65895,4.E-02); +#65895 = AXIS2_PLACEMENT_3D('',#65896,#65897,#65898); +#65896 = CARTESIAN_POINT('',(-1.6,1.21,4.E-02)); +#65897 = DIRECTION('',(1.,0.,0.)); +#65898 = DIRECTION('',(-0.,1.,0.)); +#65899 = ADVANCED_FACE('',(#65900),#65919,.T.); +#65900 = FACE_BOUND('',#65901,.T.); +#65901 = EDGE_LOOP('',(#65902,#65903,#65904,#65913)); +#65902 = ORIENTED_EDGE('',*,*,#65717,.T.); +#65903 = ORIENTED_EDGE('',*,*,#65864,.T.); +#65904 = ORIENTED_EDGE('',*,*,#65905,.F.); +#65905 = EDGE_CURVE('',#65906,#65857,#65908,.T.); +#65906 = VERTEX_POINT('',#65907); +#65907 = CARTESIAN_POINT('',(-1.2,1.25,2.46)); +#65908 = CIRCLE('',#65909,4.E-02); +#65909 = AXIS2_PLACEMENT_3D('',#65910,#65911,#65912); +#65910 = CARTESIAN_POINT('',(-1.2,1.21,2.46)); +#65911 = DIRECTION('',(1.,0.,-0.)); +#65912 = DIRECTION('',(0.,0.,1.)); +#65913 = ORIENTED_EDGE('',*,*,#65914,.F.); +#65914 = EDGE_CURVE('',#65710,#65906,#65915,.T.); +#65915 = LINE('',#65916,#65917); +#65916 = CARTESIAN_POINT('',(-1.6,1.25,2.46)); +#65917 = VECTOR('',#65918,1.); +#65918 = DIRECTION('',(1.,0.,0.)); +#65919 = CYLINDRICAL_SURFACE('',#65920,4.E-02); +#65920 = AXIS2_PLACEMENT_3D('',#65921,#65922,#65923); +#65921 = CARTESIAN_POINT('',(-1.6,1.21,2.46)); +#65922 = DIRECTION('',(1.,0.,0.)); +#65923 = DIRECTION('',(-0.,1.,0.)); +#65924 = ADVANCED_FACE('',(#65925),#65936,.T.); +#65925 = FACE_BOUND('',#65926,.T.); +#65926 = EDGE_LOOP('',(#65927,#65933,#65934,#65935)); +#65927 = ORIENTED_EDGE('',*,*,#65928,.F.); +#65928 = EDGE_CURVE('',#65879,#65906,#65929,.T.); +#65929 = LINE('',#65930,#65931); +#65930 = CARTESIAN_POINT('',(-1.2,1.25,0.)); +#65931 = VECTOR('',#65932,1.); +#65932 = DIRECTION('',(0.,0.,1.)); +#65933 = ORIENTED_EDGE('',*,*,#65878,.F.); +#65934 = ORIENTED_EDGE('',*,*,#65709,.T.); +#65935 = ORIENTED_EDGE('',*,*,#65914,.T.); +#65936 = PLANE('',#65937); +#65937 = AXIS2_PLACEMENT_3D('',#65938,#65939,#65940); +#65938 = CARTESIAN_POINT('',(-1.6,1.25,0.)); +#65939 = DIRECTION('',(0.,1.,0.)); +#65940 = DIRECTION('',(0.,-0.,1.)); +#65941 = ADVANCED_FACE('',(#65942,#65952),#66022,.T.); +#65942 = FACE_BOUND('',#65943,.T.); +#65943 = EDGE_LOOP('',(#65944,#65945,#65946,#65947,#65948,#65949,#65950, + #65951)); +#65944 = ORIENTED_EDGE('',*,*,#65749,.F.); +#65945 = ORIENTED_EDGE('',*,*,#65789,.T.); +#65946 = ORIENTED_EDGE('',*,*,#65832,.T.); +#65947 = ORIENTED_EDGE('',*,*,#65886,.F.); +#65948 = ORIENTED_EDGE('',*,*,#65928,.T.); +#65949 = ORIENTED_EDGE('',*,*,#65905,.T.); +#65950 = ORIENTED_EDGE('',*,*,#65856,.F.); +#65951 = ORIENTED_EDGE('',*,*,#65806,.F.); +#65952 = FACE_BOUND('',#65953,.T.); +#65953 = EDGE_LOOP('',(#65954,#65965,#65973,#65982,#65990,#65999,#66007, + #66016)); +#65954 = ORIENTED_EDGE('',*,*,#65955,.F.); +#65955 = EDGE_CURVE('',#65956,#65958,#65960,.T.); +#65956 = VERTEX_POINT('',#65957); +#65957 = CARTESIAN_POINT('',(-1.2,-1.21,8.E-02)); +#65958 = VERTEX_POINT('',#65959); +#65959 = CARTESIAN_POINT('',(-1.2,-1.17,4.E-02)); +#65960 = CIRCLE('',#65961,4.E-02); +#65961 = AXIS2_PLACEMENT_3D('',#65962,#65963,#65964); +#65962 = CARTESIAN_POINT('',(-1.2,-1.17,8.E-02)); +#65963 = DIRECTION('',(1.,0.,-0.)); +#65964 = DIRECTION('',(0.,0.,1.)); +#65965 = ORIENTED_EDGE('',*,*,#65966,.T.); +#65966 = EDGE_CURVE('',#65956,#65967,#65969,.T.); +#65967 = VERTEX_POINT('',#65968); +#65968 = CARTESIAN_POINT('',(-1.2,-1.21,2.42)); +#65969 = LINE('',#65970,#65971); +#65970 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#65971 = VECTOR('',#65972,1.); +#65972 = DIRECTION('',(0.,0.,1.)); +#65973 = ORIENTED_EDGE('',*,*,#65974,.T.); +#65974 = EDGE_CURVE('',#65967,#65975,#65977,.T.); +#65975 = VERTEX_POINT('',#65976); +#65976 = CARTESIAN_POINT('',(-1.2,-1.17,2.46)); +#65977 = CIRCLE('',#65978,4.E-02); +#65978 = AXIS2_PLACEMENT_3D('',#65979,#65980,#65981); +#65979 = CARTESIAN_POINT('',(-1.2,-1.17,2.42)); +#65980 = DIRECTION('',(-1.,0.,0.)); +#65981 = DIRECTION('',(0.,0.,1.)); +#65982 = ORIENTED_EDGE('',*,*,#65983,.T.); +#65983 = EDGE_CURVE('',#65975,#65984,#65986,.T.); +#65984 = VERTEX_POINT('',#65985); +#65985 = CARTESIAN_POINT('',(-1.2,1.17,2.46)); +#65986 = LINE('',#65987,#65988); +#65987 = CARTESIAN_POINT('',(-1.2,-1.21,2.46)); +#65988 = VECTOR('',#65989,1.); +#65989 = DIRECTION('',(0.,1.,0.)); +#65990 = ORIENTED_EDGE('',*,*,#65991,.F.); +#65991 = EDGE_CURVE('',#65992,#65984,#65994,.T.); +#65992 = VERTEX_POINT('',#65993); +#65993 = CARTESIAN_POINT('',(-1.2,1.21,2.42)); +#65994 = CIRCLE('',#65995,4.E-02); +#65995 = AXIS2_PLACEMENT_3D('',#65996,#65997,#65998); +#65996 = CARTESIAN_POINT('',(-1.2,1.17,2.42)); +#65997 = DIRECTION('',(1.,0.,-0.)); +#65998 = DIRECTION('',(0.,0.,1.)); +#65999 = ORIENTED_EDGE('',*,*,#66000,.F.); +#66000 = EDGE_CURVE('',#66001,#65992,#66003,.T.); +#66001 = VERTEX_POINT('',#66002); +#66002 = CARTESIAN_POINT('',(-1.2,1.21,8.E-02)); +#66003 = LINE('',#66004,#66005); +#66004 = CARTESIAN_POINT('',(-1.2,1.21,4.E-02)); +#66005 = VECTOR('',#66006,1.); +#66006 = DIRECTION('',(0.,0.,1.)); +#66007 = ORIENTED_EDGE('',*,*,#66008,.T.); +#66008 = EDGE_CURVE('',#66001,#66009,#66011,.T.); +#66009 = VERTEX_POINT('',#66010); +#66010 = CARTESIAN_POINT('',(-1.2,1.17,4.E-02)); +#66011 = CIRCLE('',#66012,4.E-02); +#66012 = AXIS2_PLACEMENT_3D('',#66013,#66014,#66015); +#66013 = CARTESIAN_POINT('',(-1.2,1.17,8.E-02)); +#66014 = DIRECTION('',(-1.,0.,0.)); +#66015 = DIRECTION('',(0.,0.,1.)); +#66016 = ORIENTED_EDGE('',*,*,#66017,.F.); +#66017 = EDGE_CURVE('',#65958,#66009,#66018,.T.); +#66018 = LINE('',#66019,#66020); +#66019 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#66020 = VECTOR('',#66021,1.); +#66021 = DIRECTION('',(0.,1.,0.)); +#66022 = PLANE('',#66023); +#66023 = AXIS2_PLACEMENT_3D('',#66024,#66025,#66026); +#66024 = CARTESIAN_POINT('',(-1.2,-1.25,0.)); +#66025 = DIRECTION('',(1.,0.,0.)); +#66026 = DIRECTION('',(0.,0.,1.)); +#66027 = ADVANCED_FACE('',(#66028),#66054,.T.); +#66028 = FACE_BOUND('',#66029,.T.); +#66029 = EDGE_LOOP('',(#66030,#66031,#66039,#66048)); +#66030 = ORIENTED_EDGE('',*,*,#65955,.T.); +#66031 = ORIENTED_EDGE('',*,*,#66032,.T.); +#66032 = EDGE_CURVE('',#65958,#66033,#66035,.T.); +#66033 = VERTEX_POINT('',#66034); +#66034 = CARTESIAN_POINT('',(1.2,-1.17,4.E-02)); +#66035 = LINE('',#66036,#66037); +#66036 = CARTESIAN_POINT('',(-1.2,-1.17,4.E-02)); +#66037 = VECTOR('',#66038,1.); +#66038 = DIRECTION('',(1.,0.,0.)); +#66039 = ORIENTED_EDGE('',*,*,#66040,.F.); +#66040 = EDGE_CURVE('',#66041,#66033,#66043,.T.); +#66041 = VERTEX_POINT('',#66042); +#66042 = CARTESIAN_POINT('',(1.2,-1.21,8.E-02)); +#66043 = CIRCLE('',#66044,4.E-02); +#66044 = AXIS2_PLACEMENT_3D('',#66045,#66046,#66047); +#66045 = CARTESIAN_POINT('',(1.2,-1.17,8.E-02)); +#66046 = DIRECTION('',(1.,0.,-0.)); +#66047 = DIRECTION('',(0.,0.,1.)); +#66048 = ORIENTED_EDGE('',*,*,#66049,.F.); +#66049 = EDGE_CURVE('',#65956,#66041,#66050,.T.); +#66050 = LINE('',#66051,#66052); +#66051 = CARTESIAN_POINT('',(-1.2,-1.21,8.E-02)); +#66052 = VECTOR('',#66053,1.); +#66053 = DIRECTION('',(1.,0.,0.)); +#66054 = CYLINDRICAL_SURFACE('',#66055,4.E-02); +#66055 = AXIS2_PLACEMENT_3D('',#66056,#66057,#66058); +#66056 = CARTESIAN_POINT('',(-1.2,-1.17,8.E-02)); +#66057 = DIRECTION('',(1.,0.,0.)); +#66058 = DIRECTION('',(0.,-1.,0.)); +#66059 = ADVANCED_FACE('',(#66060),#66078,.F.); +#66060 = FACE_BOUND('',#66061,.F.); +#66061 = EDGE_LOOP('',(#66062,#66063,#66064,#66072)); +#66062 = ORIENTED_EDGE('',*,*,#66017,.F.); +#66063 = ORIENTED_EDGE('',*,*,#66032,.T.); +#66064 = ORIENTED_EDGE('',*,*,#66065,.T.); +#66065 = EDGE_CURVE('',#66033,#66066,#66068,.T.); +#66066 = VERTEX_POINT('',#66067); +#66067 = CARTESIAN_POINT('',(1.2,1.17,4.E-02)); +#66068 = LINE('',#66069,#66070); +#66069 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66070 = VECTOR('',#66071,1.); +#66071 = DIRECTION('',(0.,1.,0.)); +#66072 = ORIENTED_EDGE('',*,*,#66073,.F.); +#66073 = EDGE_CURVE('',#66009,#66066,#66074,.T.); +#66074 = LINE('',#66075,#66076); +#66075 = CARTESIAN_POINT('',(-1.2,1.17,4.E-02)); +#66076 = VECTOR('',#66077,1.); +#66077 = DIRECTION('',(1.,0.,0.)); +#66078 = PLANE('',#66079); +#66079 = AXIS2_PLACEMENT_3D('',#66080,#66081,#66082); +#66080 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#66081 = DIRECTION('',(0.,0.,1.)); +#66082 = DIRECTION('',(1.,0.,-0.)); +#66083 = ADVANCED_FACE('',(#66084),#66103,.T.); +#66084 = FACE_BOUND('',#66085,.T.); +#66085 = EDGE_LOOP('',(#66086,#66094,#66101,#66102)); +#66086 = ORIENTED_EDGE('',*,*,#66087,.T.); +#66087 = EDGE_CURVE('',#66001,#66088,#66090,.T.); +#66088 = VERTEX_POINT('',#66089); +#66089 = CARTESIAN_POINT('',(1.2,1.21,8.E-02)); +#66090 = LINE('',#66091,#66092); +#66091 = CARTESIAN_POINT('',(-1.2,1.21,8.E-02)); +#66092 = VECTOR('',#66093,1.); +#66093 = DIRECTION('',(1.,0.,0.)); +#66094 = ORIENTED_EDGE('',*,*,#66095,.T.); +#66095 = EDGE_CURVE('',#66088,#66066,#66096,.T.); +#66096 = CIRCLE('',#66097,4.E-02); +#66097 = AXIS2_PLACEMENT_3D('',#66098,#66099,#66100); +#66098 = CARTESIAN_POINT('',(1.2,1.17,8.E-02)); +#66099 = DIRECTION('',(-1.,0.,0.)); +#66100 = DIRECTION('',(0.,0.,1.)); +#66101 = ORIENTED_EDGE('',*,*,#66073,.F.); +#66102 = ORIENTED_EDGE('',*,*,#66008,.F.); +#66103 = CYLINDRICAL_SURFACE('',#66104,4.E-02); +#66104 = AXIS2_PLACEMENT_3D('',#66105,#66106,#66107); +#66105 = CARTESIAN_POINT('',(-1.2,1.17,8.E-02)); +#66106 = DIRECTION('',(1.,0.,0.)); +#66107 = DIRECTION('',(-0.,1.,0.)); +#66108 = ADVANCED_FACE('',(#66109),#66127,.T.); +#66109 = FACE_BOUND('',#66110,.T.); +#66110 = EDGE_LOOP('',(#66111,#66119,#66120,#66121)); +#66111 = ORIENTED_EDGE('',*,*,#66112,.F.); +#66112 = EDGE_CURVE('',#66088,#66113,#66115,.T.); +#66113 = VERTEX_POINT('',#66114); +#66114 = CARTESIAN_POINT('',(1.2,1.21,2.42)); +#66115 = LINE('',#66116,#66117); +#66116 = CARTESIAN_POINT('',(1.2,1.21,4.E-02)); +#66117 = VECTOR('',#66118,1.); +#66118 = DIRECTION('',(0.,0.,1.)); +#66119 = ORIENTED_EDGE('',*,*,#66087,.F.); +#66120 = ORIENTED_EDGE('',*,*,#66000,.T.); +#66121 = ORIENTED_EDGE('',*,*,#66122,.T.); +#66122 = EDGE_CURVE('',#65992,#66113,#66123,.T.); +#66123 = LINE('',#66124,#66125); +#66124 = CARTESIAN_POINT('',(-1.2,1.21,2.42)); +#66125 = VECTOR('',#66126,1.); +#66126 = DIRECTION('',(1.,0.,0.)); +#66127 = PLANE('',#66128); +#66128 = AXIS2_PLACEMENT_3D('',#66129,#66130,#66131); +#66129 = CARTESIAN_POINT('',(-1.2,1.21,4.E-02)); +#66130 = DIRECTION('',(0.,1.,0.)); +#66131 = DIRECTION('',(0.,-0.,1.)); +#66132 = ADVANCED_FACE('',(#66133),#66152,.T.); +#66133 = FACE_BOUND('',#66134,.T.); +#66134 = EDGE_LOOP('',(#66135,#66136,#66144,#66151)); +#66135 = ORIENTED_EDGE('',*,*,#65991,.T.); +#66136 = ORIENTED_EDGE('',*,*,#66137,.T.); +#66137 = EDGE_CURVE('',#65984,#66138,#66140,.T.); +#66138 = VERTEX_POINT('',#66139); +#66139 = CARTESIAN_POINT('',(1.2,1.17,2.46)); +#66140 = LINE('',#66141,#66142); +#66141 = CARTESIAN_POINT('',(-1.2,1.17,2.46)); +#66142 = VECTOR('',#66143,1.); +#66143 = DIRECTION('',(1.,0.,0.)); +#66144 = ORIENTED_EDGE('',*,*,#66145,.F.); +#66145 = EDGE_CURVE('',#66113,#66138,#66146,.T.); +#66146 = CIRCLE('',#66147,4.E-02); +#66147 = AXIS2_PLACEMENT_3D('',#66148,#66149,#66150); +#66148 = CARTESIAN_POINT('',(1.2,1.17,2.42)); +#66149 = DIRECTION('',(1.,0.,-0.)); +#66150 = DIRECTION('',(0.,0.,1.)); +#66151 = ORIENTED_EDGE('',*,*,#66122,.F.); +#66152 = CYLINDRICAL_SURFACE('',#66153,4.E-02); +#66153 = AXIS2_PLACEMENT_3D('',#66154,#66155,#66156); +#66154 = CARTESIAN_POINT('',(-1.2,1.17,2.42)); +#66155 = DIRECTION('',(1.,0.,0.)); +#66156 = DIRECTION('',(-0.,1.,0.)); +#66157 = ADVANCED_FACE('',(#66158),#66176,.T.); +#66158 = FACE_BOUND('',#66159,.T.); +#66159 = EDGE_LOOP('',(#66160,#66161,#66169,#66175)); +#66160 = ORIENTED_EDGE('',*,*,#65983,.F.); +#66161 = ORIENTED_EDGE('',*,*,#66162,.T.); +#66162 = EDGE_CURVE('',#65975,#66163,#66165,.T.); +#66163 = VERTEX_POINT('',#66164); +#66164 = CARTESIAN_POINT('',(1.2,-1.17,2.46)); +#66165 = LINE('',#66166,#66167); +#66166 = CARTESIAN_POINT('',(-1.2,-1.17,2.46)); +#66167 = VECTOR('',#66168,1.); +#66168 = DIRECTION('',(1.,0.,0.)); +#66169 = ORIENTED_EDGE('',*,*,#66170,.T.); +#66170 = EDGE_CURVE('',#66163,#66138,#66171,.T.); +#66171 = LINE('',#66172,#66173); +#66172 = CARTESIAN_POINT('',(1.2,-1.21,2.46)); +#66173 = VECTOR('',#66174,1.); +#66174 = DIRECTION('',(0.,1.,0.)); +#66175 = ORIENTED_EDGE('',*,*,#66137,.F.); +#66176 = PLANE('',#66177); +#66177 = AXIS2_PLACEMENT_3D('',#66178,#66179,#66180); +#66178 = CARTESIAN_POINT('',(-1.2,-1.21,2.46)); +#66179 = DIRECTION('',(0.,0.,1.)); +#66180 = DIRECTION('',(1.,0.,-0.)); +#66181 = ADVANCED_FACE('',(#66182),#66201,.T.); +#66182 = FACE_BOUND('',#66183,.T.); +#66183 = EDGE_LOOP('',(#66184,#66192,#66199,#66200)); +#66184 = ORIENTED_EDGE('',*,*,#66185,.T.); +#66185 = EDGE_CURVE('',#65967,#66186,#66188,.T.); +#66186 = VERTEX_POINT('',#66187); +#66187 = CARTESIAN_POINT('',(1.2,-1.21,2.42)); +#66188 = LINE('',#66189,#66190); +#66189 = CARTESIAN_POINT('',(-1.2,-1.21,2.42)); +#66190 = VECTOR('',#66191,1.); +#66191 = DIRECTION('',(1.,0.,0.)); +#66192 = ORIENTED_EDGE('',*,*,#66193,.T.); +#66193 = EDGE_CURVE('',#66186,#66163,#66194,.T.); +#66194 = CIRCLE('',#66195,4.E-02); +#66195 = AXIS2_PLACEMENT_3D('',#66196,#66197,#66198); +#66196 = CARTESIAN_POINT('',(1.2,-1.17,2.42)); +#66197 = DIRECTION('',(-1.,0.,0.)); +#66198 = DIRECTION('',(0.,0.,1.)); +#66199 = ORIENTED_EDGE('',*,*,#66162,.F.); +#66200 = ORIENTED_EDGE('',*,*,#65974,.F.); +#66201 = CYLINDRICAL_SURFACE('',#66202,4.E-02); +#66202 = AXIS2_PLACEMENT_3D('',#66203,#66204,#66205); +#66203 = CARTESIAN_POINT('',(-1.2,-1.17,2.42)); +#66204 = DIRECTION('',(1.,0.,0.)); +#66205 = DIRECTION('',(0.,-1.,0.)); +#66206 = ADVANCED_FACE('',(#66207),#66218,.F.); +#66207 = FACE_BOUND('',#66208,.F.); +#66208 = EDGE_LOOP('',(#66209,#66215,#66216,#66217)); +#66209 = ORIENTED_EDGE('',*,*,#66210,.F.); +#66210 = EDGE_CURVE('',#66041,#66186,#66211,.T.); +#66211 = LINE('',#66212,#66213); +#66212 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66213 = VECTOR('',#66214,1.); +#66214 = DIRECTION('',(0.,0.,1.)); +#66215 = ORIENTED_EDGE('',*,*,#66049,.F.); +#66216 = ORIENTED_EDGE('',*,*,#65966,.T.); +#66217 = ORIENTED_EDGE('',*,*,#66185,.T.); +#66218 = PLANE('',#66219); +#66219 = AXIS2_PLACEMENT_3D('',#66220,#66221,#66222); +#66220 = CARTESIAN_POINT('',(-1.2,-1.21,4.E-02)); +#66221 = DIRECTION('',(0.,1.,0.)); +#66222 = DIRECTION('',(0.,-0.,1.)); +#66223 = ADVANCED_FACE('',(#66224,#66294),#66304,.F.); +#66224 = FACE_BOUND('',#66225,.F.); +#66225 = EDGE_LOOP('',(#66226,#66236,#66245,#66253,#66262,#66270,#66279, + #66287)); +#66226 = ORIENTED_EDGE('',*,*,#66227,.F.); +#66227 = EDGE_CURVE('',#66228,#66230,#66232,.T.); +#66228 = VERTEX_POINT('',#66229); +#66229 = CARTESIAN_POINT('',(1.2,-1.25,4.E-02)); +#66230 = VERTEX_POINT('',#66231); +#66231 = CARTESIAN_POINT('',(1.2,-1.25,2.46)); +#66232 = LINE('',#66233,#66234); +#66233 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66234 = VECTOR('',#66235,1.); +#66235 = DIRECTION('',(0.,0.,1.)); +#66236 = ORIENTED_EDGE('',*,*,#66237,.T.); +#66237 = EDGE_CURVE('',#66228,#66238,#66240,.T.); +#66238 = VERTEX_POINT('',#66239); +#66239 = CARTESIAN_POINT('',(1.2,-1.21,0.)); +#66240 = CIRCLE('',#66241,4.E-02); +#66241 = AXIS2_PLACEMENT_3D('',#66242,#66243,#66244); +#66242 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66243 = DIRECTION('',(1.,0.,-0.)); +#66244 = DIRECTION('',(0.,0.,1.)); +#66245 = ORIENTED_EDGE('',*,*,#66246,.T.); +#66246 = EDGE_CURVE('',#66238,#66247,#66249,.T.); +#66247 = VERTEX_POINT('',#66248); +#66248 = CARTESIAN_POINT('',(1.2,1.21,0.)); +#66249 = LINE('',#66250,#66251); +#66250 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66251 = VECTOR('',#66252,1.); +#66252 = DIRECTION('',(0.,1.,0.)); +#66253 = ORIENTED_EDGE('',*,*,#66254,.F.); +#66254 = EDGE_CURVE('',#66255,#66247,#66257,.T.); +#66255 = VERTEX_POINT('',#66256); +#66256 = CARTESIAN_POINT('',(1.2,1.25,4.E-02)); +#66257 = CIRCLE('',#66258,4.E-02); +#66258 = AXIS2_PLACEMENT_3D('',#66259,#66260,#66261); +#66259 = CARTESIAN_POINT('',(1.2,1.21,4.E-02)); +#66260 = DIRECTION('',(-1.,0.,0.)); +#66261 = DIRECTION('',(0.,0.,1.)); +#66262 = ORIENTED_EDGE('',*,*,#66263,.T.); +#66263 = EDGE_CURVE('',#66255,#66264,#66266,.T.); +#66264 = VERTEX_POINT('',#66265); +#66265 = CARTESIAN_POINT('',(1.2,1.25,2.46)); +#66266 = LINE('',#66267,#66268); +#66267 = CARTESIAN_POINT('',(1.2,1.25,0.)); +#66268 = VECTOR('',#66269,1.); +#66269 = DIRECTION('',(0.,0.,1.)); +#66270 = ORIENTED_EDGE('',*,*,#66271,.T.); +#66271 = EDGE_CURVE('',#66264,#66272,#66274,.T.); +#66272 = VERTEX_POINT('',#66273); +#66273 = CARTESIAN_POINT('',(1.2,1.21,2.5)); +#66274 = CIRCLE('',#66275,4.E-02); +#66275 = AXIS2_PLACEMENT_3D('',#66276,#66277,#66278); +#66276 = CARTESIAN_POINT('',(1.2,1.21,2.46)); +#66277 = DIRECTION('',(1.,0.,-0.)); +#66278 = DIRECTION('',(0.,0.,1.)); +#66279 = ORIENTED_EDGE('',*,*,#66280,.F.); +#66280 = EDGE_CURVE('',#66281,#66272,#66283,.T.); +#66281 = VERTEX_POINT('',#66282); +#66282 = CARTESIAN_POINT('',(1.2,-1.21,2.5)); +#66283 = LINE('',#66284,#66285); +#66284 = CARTESIAN_POINT('',(1.2,-1.25,2.5)); +#66285 = VECTOR('',#66286,1.); +#66286 = DIRECTION('',(0.,1.,0.)); +#66287 = ORIENTED_EDGE('',*,*,#66288,.F.); +#66288 = EDGE_CURVE('',#66230,#66281,#66289,.T.); +#66289 = CIRCLE('',#66290,4.E-02); +#66290 = AXIS2_PLACEMENT_3D('',#66291,#66292,#66293); +#66291 = CARTESIAN_POINT('',(1.2,-1.21,2.46)); +#66292 = DIRECTION('',(-1.,0.,0.)); +#66293 = DIRECTION('',(0.,0.,1.)); +#66294 = FACE_BOUND('',#66295,.F.); +#66295 = EDGE_LOOP('',(#66296,#66297,#66298,#66299,#66300,#66301,#66302, + #66303)); +#66296 = ORIENTED_EDGE('',*,*,#66040,.F.); +#66297 = ORIENTED_EDGE('',*,*,#66210,.T.); +#66298 = ORIENTED_EDGE('',*,*,#66193,.T.); +#66299 = ORIENTED_EDGE('',*,*,#66170,.T.); +#66300 = ORIENTED_EDGE('',*,*,#66145,.F.); +#66301 = ORIENTED_EDGE('',*,*,#66112,.F.); +#66302 = ORIENTED_EDGE('',*,*,#66095,.T.); +#66303 = ORIENTED_EDGE('',*,*,#66065,.F.); +#66304 = PLANE('',#66305); +#66305 = AXIS2_PLACEMENT_3D('',#66306,#66307,#66308); +#66306 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66307 = DIRECTION('',(1.,0.,0.)); +#66308 = DIRECTION('',(0.,0.,1.)); +#66309 = ADVANCED_FACE('',(#66310),#66335,.F.); +#66310 = FACE_BOUND('',#66311,.F.); +#66311 = EDGE_LOOP('',(#66312,#66322,#66328,#66329)); +#66312 = ORIENTED_EDGE('',*,*,#66313,.F.); +#66313 = EDGE_CURVE('',#66314,#66316,#66318,.T.); +#66314 = VERTEX_POINT('',#66315); +#66315 = CARTESIAN_POINT('',(1.6,-1.25,4.E-02)); +#66316 = VERTEX_POINT('',#66317); +#66317 = CARTESIAN_POINT('',(1.6,-1.25,2.46)); +#66318 = LINE('',#66319,#66320); +#66319 = CARTESIAN_POINT('',(1.6,-1.25,0.)); +#66320 = VECTOR('',#66321,1.); +#66321 = DIRECTION('',(0.,0.,1.)); +#66322 = ORIENTED_EDGE('',*,*,#66323,.F.); +#66323 = EDGE_CURVE('',#66228,#66314,#66324,.T.); +#66324 = LINE('',#66325,#66326); +#66325 = CARTESIAN_POINT('',(1.2,-1.25,4.E-02)); +#66326 = VECTOR('',#66327,1.); +#66327 = DIRECTION('',(1.,0.,0.)); +#66328 = ORIENTED_EDGE('',*,*,#66227,.T.); +#66329 = ORIENTED_EDGE('',*,*,#66330,.T.); +#66330 = EDGE_CURVE('',#66230,#66316,#66331,.T.); +#66331 = LINE('',#66332,#66333); +#66332 = CARTESIAN_POINT('',(1.2,-1.25,2.46)); +#66333 = VECTOR('',#66334,1.); +#66334 = DIRECTION('',(1.,0.,0.)); +#66335 = PLANE('',#66336); +#66336 = AXIS2_PLACEMENT_3D('',#66337,#66338,#66339); +#66337 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66338 = DIRECTION('',(0.,1.,0.)); +#66339 = DIRECTION('',(0.,-0.,1.)); +#66340 = ADVANCED_FACE('',(#66341),#66360,.T.); +#66341 = FACE_BOUND('',#66342,.T.); +#66342 = EDGE_LOOP('',(#66343,#66344,#66352,#66359)); +#66343 = ORIENTED_EDGE('',*,*,#66237,.T.); +#66344 = ORIENTED_EDGE('',*,*,#66345,.T.); +#66345 = EDGE_CURVE('',#66238,#66346,#66348,.T.); +#66346 = VERTEX_POINT('',#66347); +#66347 = CARTESIAN_POINT('',(1.6,-1.21,0.)); +#66348 = LINE('',#66349,#66350); +#66349 = CARTESIAN_POINT('',(1.2,-1.21,0.)); +#66350 = VECTOR('',#66351,1.); +#66351 = DIRECTION('',(1.,0.,0.)); +#66352 = ORIENTED_EDGE('',*,*,#66353,.F.); +#66353 = EDGE_CURVE('',#66314,#66346,#66354,.T.); +#66354 = CIRCLE('',#66355,4.E-02); +#66355 = AXIS2_PLACEMENT_3D('',#66356,#66357,#66358); +#66356 = CARTESIAN_POINT('',(1.6,-1.21,4.E-02)); +#66357 = DIRECTION('',(1.,0.,-0.)); +#66358 = DIRECTION('',(0.,0.,1.)); +#66359 = ORIENTED_EDGE('',*,*,#66323,.F.); +#66360 = CYLINDRICAL_SURFACE('',#66361,4.E-02); +#66361 = AXIS2_PLACEMENT_3D('',#66362,#66363,#66364); +#66362 = CARTESIAN_POINT('',(1.2,-1.21,4.E-02)); +#66363 = DIRECTION('',(1.,0.,0.)); +#66364 = DIRECTION('',(0.,-1.,0.)); +#66365 = ADVANCED_FACE('',(#66366),#66385,.T.); +#66366 = FACE_BOUND('',#66367,.T.); +#66367 = EDGE_LOOP('',(#66368,#66369,#66378,#66384)); +#66368 = ORIENTED_EDGE('',*,*,#66330,.T.); +#66369 = ORIENTED_EDGE('',*,*,#66370,.T.); +#66370 = EDGE_CURVE('',#66316,#66371,#66373,.T.); +#66371 = VERTEX_POINT('',#66372); +#66372 = CARTESIAN_POINT('',(1.6,-1.21,2.5)); +#66373 = CIRCLE('',#66374,4.E-02); +#66374 = AXIS2_PLACEMENT_3D('',#66375,#66376,#66377); +#66375 = CARTESIAN_POINT('',(1.6,-1.21,2.46)); +#66376 = DIRECTION('',(-1.,0.,0.)); +#66377 = DIRECTION('',(0.,0.,1.)); +#66378 = ORIENTED_EDGE('',*,*,#66379,.F.); +#66379 = EDGE_CURVE('',#66281,#66371,#66380,.T.); +#66380 = LINE('',#66381,#66382); +#66381 = CARTESIAN_POINT('',(1.2,-1.21,2.5)); +#66382 = VECTOR('',#66383,1.); +#66383 = DIRECTION('',(1.,0.,0.)); +#66384 = ORIENTED_EDGE('',*,*,#66288,.F.); +#66385 = CYLINDRICAL_SURFACE('',#66386,4.E-02); +#66386 = AXIS2_PLACEMENT_3D('',#66387,#66388,#66389); +#66387 = CARTESIAN_POINT('',(1.2,-1.21,2.46)); +#66388 = DIRECTION('',(1.,0.,0.)); +#66389 = DIRECTION('',(0.,-1.,0.)); +#66390 = ADVANCED_FACE('',(#66391),#66409,.F.); +#66391 = FACE_BOUND('',#66392,.F.); +#66392 = EDGE_LOOP('',(#66393,#66394,#66395,#66403)); +#66393 = ORIENTED_EDGE('',*,*,#66246,.F.); +#66394 = ORIENTED_EDGE('',*,*,#66345,.T.); +#66395 = ORIENTED_EDGE('',*,*,#66396,.T.); +#66396 = EDGE_CURVE('',#66346,#66397,#66399,.T.); +#66397 = VERTEX_POINT('',#66398); +#66398 = CARTESIAN_POINT('',(1.6,1.21,0.)); +#66399 = LINE('',#66400,#66401); +#66400 = CARTESIAN_POINT('',(1.6,-1.25,0.)); +#66401 = VECTOR('',#66402,1.); +#66402 = DIRECTION('',(0.,1.,0.)); +#66403 = ORIENTED_EDGE('',*,*,#66404,.F.); +#66404 = EDGE_CURVE('',#66247,#66397,#66405,.T.); +#66405 = LINE('',#66406,#66407); +#66406 = CARTESIAN_POINT('',(1.2,1.21,0.)); +#66407 = VECTOR('',#66408,1.); +#66408 = DIRECTION('',(1.,0.,0.)); +#66409 = PLANE('',#66410); +#66410 = AXIS2_PLACEMENT_3D('',#66411,#66412,#66413); +#66411 = CARTESIAN_POINT('',(1.2,-1.25,0.)); +#66412 = DIRECTION('',(0.,0.,1.)); +#66413 = DIRECTION('',(1.,0.,-0.)); +#66414 = ADVANCED_FACE('',(#66415),#66433,.T.); +#66415 = FACE_BOUND('',#66416,.T.); +#66416 = EDGE_LOOP('',(#66417,#66418,#66419,#66427)); +#66417 = ORIENTED_EDGE('',*,*,#66280,.F.); +#66418 = ORIENTED_EDGE('',*,*,#66379,.T.); +#66419 = ORIENTED_EDGE('',*,*,#66420,.T.); +#66420 = EDGE_CURVE('',#66371,#66421,#66423,.T.); +#66421 = VERTEX_POINT('',#66422); +#66422 = CARTESIAN_POINT('',(1.6,1.21,2.5)); +#66423 = LINE('',#66424,#66425); +#66424 = CARTESIAN_POINT('',(1.6,-1.25,2.5)); +#66425 = VECTOR('',#66426,1.); +#66426 = DIRECTION('',(0.,1.,0.)); +#66427 = ORIENTED_EDGE('',*,*,#66428,.F.); +#66428 = EDGE_CURVE('',#66272,#66421,#66429,.T.); +#66429 = LINE('',#66430,#66431); +#66430 = CARTESIAN_POINT('',(1.2,1.21,2.5)); +#66431 = VECTOR('',#66432,1.); +#66432 = DIRECTION('',(1.,0.,0.)); +#66433 = PLANE('',#66434); +#66434 = AXIS2_PLACEMENT_3D('',#66435,#66436,#66437); +#66435 = CARTESIAN_POINT('',(1.2,-1.25,2.5)); +#66436 = DIRECTION('',(0.,0.,1.)); +#66437 = DIRECTION('',(1.,0.,-0.)); +#66438 = ADVANCED_FACE('',(#66439),#66458,.T.); +#66439 = FACE_BOUND('',#66440,.T.); +#66440 = EDGE_LOOP('',(#66441,#66449,#66456,#66457)); +#66441 = ORIENTED_EDGE('',*,*,#66442,.T.); +#66442 = EDGE_CURVE('',#66255,#66443,#66445,.T.); +#66443 = VERTEX_POINT('',#66444); +#66444 = CARTESIAN_POINT('',(1.6,1.25,4.E-02)); +#66445 = LINE('',#66446,#66447); +#66446 = CARTESIAN_POINT('',(1.2,1.25,4.E-02)); +#66447 = VECTOR('',#66448,1.); +#66448 = DIRECTION('',(1.,0.,0.)); +#66449 = ORIENTED_EDGE('',*,*,#66450,.T.); +#66450 = EDGE_CURVE('',#66443,#66397,#66451,.T.); +#66451 = CIRCLE('',#66452,4.E-02); +#66452 = AXIS2_PLACEMENT_3D('',#66453,#66454,#66455); +#66453 = CARTESIAN_POINT('',(1.6,1.21,4.E-02)); +#66454 = DIRECTION('',(-1.,0.,0.)); +#66455 = DIRECTION('',(0.,0.,1.)); +#66456 = ORIENTED_EDGE('',*,*,#66404,.F.); +#66457 = ORIENTED_EDGE('',*,*,#66254,.F.); +#66458 = CYLINDRICAL_SURFACE('',#66459,4.E-02); +#66459 = AXIS2_PLACEMENT_3D('',#66460,#66461,#66462); +#66460 = CARTESIAN_POINT('',(1.2,1.21,4.E-02)); +#66461 = DIRECTION('',(1.,0.,0.)); +#66462 = DIRECTION('',(-0.,1.,0.)); +#66463 = ADVANCED_FACE('',(#66464),#66483,.T.); +#66464 = FACE_BOUND('',#66465,.T.); +#66465 = EDGE_LOOP('',(#66466,#66467,#66468,#66477)); +#66466 = ORIENTED_EDGE('',*,*,#66271,.T.); +#66467 = ORIENTED_EDGE('',*,*,#66428,.T.); +#66468 = ORIENTED_EDGE('',*,*,#66469,.F.); +#66469 = EDGE_CURVE('',#66470,#66421,#66472,.T.); +#66470 = VERTEX_POINT('',#66471); +#66471 = CARTESIAN_POINT('',(1.6,1.25,2.46)); +#66472 = CIRCLE('',#66473,4.E-02); +#66473 = AXIS2_PLACEMENT_3D('',#66474,#66475,#66476); +#66474 = CARTESIAN_POINT('',(1.6,1.21,2.46)); +#66475 = DIRECTION('',(1.,0.,-0.)); +#66476 = DIRECTION('',(0.,0.,1.)); +#66477 = ORIENTED_EDGE('',*,*,#66478,.F.); +#66478 = EDGE_CURVE('',#66264,#66470,#66479,.T.); +#66479 = LINE('',#66480,#66481); +#66480 = CARTESIAN_POINT('',(1.2,1.25,2.46)); +#66481 = VECTOR('',#66482,1.); +#66482 = DIRECTION('',(1.,0.,0.)); +#66483 = CYLINDRICAL_SURFACE('',#66484,4.E-02); +#66484 = AXIS2_PLACEMENT_3D('',#66485,#66486,#66487); +#66485 = CARTESIAN_POINT('',(1.2,1.21,2.46)); +#66486 = DIRECTION('',(1.,0.,0.)); +#66487 = DIRECTION('',(-0.,1.,0.)); +#66488 = ADVANCED_FACE('',(#66489),#66500,.T.); +#66489 = FACE_BOUND('',#66490,.T.); +#66490 = EDGE_LOOP('',(#66491,#66497,#66498,#66499)); +#66491 = ORIENTED_EDGE('',*,*,#66492,.F.); +#66492 = EDGE_CURVE('',#66443,#66470,#66493,.T.); +#66493 = LINE('',#66494,#66495); +#66494 = CARTESIAN_POINT('',(1.6,1.25,0.)); +#66495 = VECTOR('',#66496,1.); +#66496 = DIRECTION('',(0.,0.,1.)); +#66497 = ORIENTED_EDGE('',*,*,#66442,.F.); +#66498 = ORIENTED_EDGE('',*,*,#66263,.T.); +#66499 = ORIENTED_EDGE('',*,*,#66478,.T.); +#66500 = PLANE('',#66501); +#66501 = AXIS2_PLACEMENT_3D('',#66502,#66503,#66504); +#66502 = CARTESIAN_POINT('',(1.2,1.25,0.)); +#66503 = DIRECTION('',(0.,1.,0.)); +#66504 = DIRECTION('',(0.,-0.,1.)); +#66505 = ADVANCED_FACE('',(#66506),#66516,.T.); +#66506 = FACE_BOUND('',#66507,.T.); +#66507 = EDGE_LOOP('',(#66508,#66509,#66510,#66511,#66512,#66513,#66514, + #66515)); +#66508 = ORIENTED_EDGE('',*,*,#66313,.F.); +#66509 = ORIENTED_EDGE('',*,*,#66353,.T.); +#66510 = ORIENTED_EDGE('',*,*,#66396,.T.); +#66511 = ORIENTED_EDGE('',*,*,#66450,.F.); +#66512 = ORIENTED_EDGE('',*,*,#66492,.T.); +#66513 = ORIENTED_EDGE('',*,*,#66469,.T.); +#66514 = ORIENTED_EDGE('',*,*,#66420,.F.); +#66515 = ORIENTED_EDGE('',*,*,#66370,.F.); +#66516 = PLANE('',#66517); +#66517 = AXIS2_PLACEMENT_3D('',#66518,#66519,#66520); +#66518 = CARTESIAN_POINT('',(1.6,-1.25,0.)); +#66519 = DIRECTION('',(1.,0.,0.)); +#66520 = DIRECTION('',(0.,0.,1.)); +#66521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#66525)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#66522,#66523,#66524)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#66522 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#66523 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#66524 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#66525 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#66522, + 'distance_accuracy_value','confusion accuracy'); +#66526 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66527,#66529); +#66527 = ( REPRESENTATION_RELATIONSHIP('','',#65666,#65643) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66528) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66528 = ITEM_DEFINED_TRANSFORMATION('','',#11,#65644); +#66529 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66530); +#66530 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('69','=>[0:1:1:39]','',#65638, + #65661,$); +#66531 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#65663)); +#66532 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66533,#66535); +#66533 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66534) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66534 = ITEM_DEFINED_TRANSFORMATION('','',#11,#219); +#66535 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66536); +#66536 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('71','R61','',#5,#523,$); +#66537 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66538,#66540); +#66538 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66539) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66539 = ITEM_DEFINED_TRANSFORMATION('','',#11,#223); +#66540 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66541); +#66541 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('72','Rcc1','',#5,#523,$); +#66542 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66543,#66545); +#66543 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66544) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66544 = ITEM_DEFINED_TRANSFORMATION('','',#11,#227); +#66545 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66546); +#66546 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('73','R1','',#5,#523,$); +#66547 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66548,#66550); +#66548 = ( REPRESENTATION_RELATIONSHIP('','',#6178,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66549) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66549 = ITEM_DEFINED_TRANSFORMATION('','',#11,#231); +#66550 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66551); +#66551 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('74','P5','',#5,#6173,$); +#66552 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66553,#66555); +#66553 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66554) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66554 = ITEM_DEFINED_TRANSFORMATION('','',#11,#235); +#66555 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66556); +#66556 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('75','DB3','',#5,#10415,$); +#66557 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66558,#66560); +#66558 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66559) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66559 = ITEM_DEFINED_TRANSFORMATION('','',#11,#239); +#66560 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66561); +#66561 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('76','C41','',#5,#42695,$); +#66562 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66563,#66565); +#66563 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66564) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66564 = ITEM_DEFINED_TRANSFORMATION('','',#11,#243); +#66565 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66566); +#66566 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('77','R55','',#5,#523,$); +#66567 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66568,#66570); +#66568 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66569) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66569 = ITEM_DEFINED_TRANSFORMATION('','',#11,#247); +#66570 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66571); +#66571 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('78','Rled','',#5,#523,$); +#66572 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66573,#66575); +#66573 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66574) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66574 = ITEM_DEFINED_TRANSFORMATION('','',#11,#251); +#66575 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66576); +#66576 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('79','Rgs','',#5,#523,$); +#66577 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66578,#66580); +#66578 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66579) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66579 = ITEM_DEFINED_TRANSFORMATION('','',#11,#255); +#66580 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66581); +#66581 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('80','P8','',#5,#11985,$); +#66582 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66583,#66585); +#66583 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66584) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66584 = ITEM_DEFINED_TRANSFORMATION('','',#11,#259); +#66585 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66586); +#66586 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('81','R41','',#5,#523,$); +#66587 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66588,#66590); +#66588 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66589) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66589 = ITEM_DEFINED_TRANSFORMATION('','',#11,#263); +#66590 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66591); +#66591 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('82','DB4','',#5,#10415,$); +#66592 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66593,#66595); +#66593 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66594) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66594 = ITEM_DEFINED_TRANSFORMATION('','',#11,#267); +#66595 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66596); +#66596 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('83','RB2','',#5,#523,$); +#66597 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66598,#66600); +#66598 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66599) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66599 = ITEM_DEFINED_TRANSFORMATION('','',#11,#271); +#66600 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66601); +#66601 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('84','Rcc2','',#5,#523,$); +#66602 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66603,#66605); +#66603 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66604) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66604 = ITEM_DEFINED_TRANSFORMATION('','',#11,#275); +#66605 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66606); +#66606 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('85','D1','',#5,#10415,$); +#66607 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66608,#66610); +#66608 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66609) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66609 = ITEM_DEFINED_TRANSFORMATION('','',#11,#279); +#66610 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66611); +#66611 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('86','Rtp','',#5,#523,$); +#66612 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66613,#66615); +#66613 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66614) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66614 = ITEM_DEFINED_TRANSFORMATION('','',#11,#283); +#66615 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66616); +#66616 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('87','R30','',#5,#523,$); +#66617 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66618,#66620); +#66618 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66619) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66619 = ITEM_DEFINED_TRANSFORMATION('','',#11,#287); +#66620 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66621); +#66621 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('88','R6','',#5,#523,$); +#66622 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66623,#66625); +#66623 = ( REPRESENTATION_RELATIONSHIP('','',#11990,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66624) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66624 = ITEM_DEFINED_TRANSFORMATION('','',#11,#291); +#66625 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66626); +#66626 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('89','P12','',#5,#11985,$); +#66627 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66628,#66630); +#66628 = ( REPRESENTATION_RELATIONSHIP('','',#65643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66629) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66629 = ITEM_DEFINED_TRANSFORMATION('','',#11,#295); +#66630 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66631); +#66631 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('90','C32','',#5,#65638,$); +#66632 = SHAPE_DEFINITION_REPRESENTATION(#66633,#66639); +#66633 = PRODUCT_DEFINITION_SHAPE('','',#66634); +#66634 = PRODUCT_DEFINITION('design','',#66635,#66638); +#66635 = PRODUCT_DEFINITION_FORMATION('','',#66636); +#66636 = PRODUCT('USB_C_Receptacle_GCT_USB4085', + 'USB_C_Receptacle_GCT_USB4085','',(#66637)); +#66637 = PRODUCT_CONTEXT('',#2,'mechanical'); +#66638 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#66639 = SHAPE_REPRESENTATION('',(#11,#66640),#66644); +#66640 = AXIS2_PLACEMENT_3D('',#66641,#66642,#66643); +#66641 = CARTESIAN_POINT('',(0.,0.,0.)); +#66642 = DIRECTION('',(0.,0.,1.)); +#66643 = DIRECTION('',(1.,0.,-0.)); +#66644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#66648)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#66645,#66646,#66647)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#66645 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#66646 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#66647 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#66648 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#66645, + 'distance_accuracy_value','confusion accuracy'); +#66649 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66650,#66652); +#66650 = ( REPRESENTATION_RELATIONSHIP('','',#66639,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66651) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66651 = ITEM_DEFINED_TRANSFORMATION('','',#11,#299); +#66652 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66653); +#66653 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('92','J9','',#5,#66634,$); +#66654 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#66636)); +#66655 = SHAPE_DEFINITION_REPRESENTATION(#66656,#66662); +#66656 = PRODUCT_DEFINITION_SHAPE('','',#66657); +#66657 = PRODUCT_DEFINITION('design','',#66658,#66661); +#66658 = PRODUCT_DEFINITION_FORMATION('','',#66659); +#66659 = PRODUCT('USB_C_Receptacle_GCT_USB4085', + 'USB_C_Receptacle_GCT_USB4085','',(#66660)); +#66660 = PRODUCT_CONTEXT('',#2,'mechanical'); +#66661 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#66662 = SHAPE_REPRESENTATION('',(#11,#66663,#70860,#75412,#75562,#75712 + ,#75862,#76012,#76162,#76312,#76462,#76612,#76762,#76912,#77062, + #77212,#77362,#77512,#77662,#77812,#78028,#78244,#78460,#78676, + #78892,#79108,#79324,#79540,#79756,#79972,#80188,#80404,#80620, + #80836,#81052),#81268); +#66663 = MANIFOLD_SOLID_BREP('',#66664); +#66664 = CLOSED_SHELL('',(#66665,#66865,#67002,#67027,#67052,#67109, + #67166,#67190,#67214,#67272,#67330,#67355,#67380,#67437,#67494, + #67518,#67542,#67575,#67608,#67640,#67672,#67696,#67713,#67739, + #67765,#67797,#67872,#67954,#67979,#67996,#68028,#68113,#68130, + #68184,#68201,#68288,#68313,#68330,#68347,#68364,#68376,#68393, + #68405,#68422,#68439,#68456,#68481,#68506,#68537,#68562,#68593, + #68618,#68643,#68668,#68698,#68715,#68732,#68805,#68897,#68989, + #69062,#69084,#69096,#69169,#69261,#69278,#69295,#69387,#69460, + #69477,#69494,#69511,#69528,#69545,#69562,#69586,#69610,#69634, + #69651,#69675,#69692,#69718,#69744,#69761,#69783,#69800,#69831, + #69848,#69865,#69877,#69894,#69911,#69928,#69945,#69962,#69979, + #69996,#70008,#70025,#70042,#70059,#70076,#70093,#70110,#70127, + #70139,#70161,#70178,#70209,#70226,#70248,#70260,#70272,#70303, + #70315,#70327,#70358,#70367,#70376,#70393,#70410,#70443,#70460, + #70477,#70510,#70543,#70576,#70593,#70610,#70641,#70658,#70675, + #70706,#70737,#70768,#70785,#70802,#70814,#70831,#70848)); +#66665 = ADVANCED_FACE('',(#66666,#66838,#66849),#66860,.F.); +#66666 = FACE_BOUND('',#66667,.F.); +#66667 = EDGE_LOOP('',(#66668,#66678,#66686,#66694,#66702,#66710,#66718, + #66726,#66734,#66742,#66751,#66759,#66767,#66776,#66784,#66792, + #66800,#66808,#66816,#66824,#66832)); +#66668 = ORIENTED_EDGE('',*,*,#66669,.F.); +#66669 = EDGE_CURVE('',#66670,#66672,#66674,.T.); +#66670 = VERTEX_POINT('',#66671); +#66671 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66672 = VERTEX_POINT('',#66673); +#66673 = CARTESIAN_POINT('',(-0.195,-8.61,0.29)); +#66674 = LINE('',#66675,#66676); +#66675 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66676 = VECTOR('',#66677,1.); +#66677 = DIRECTION('',(-1.,0.,0.)); +#66678 = ORIENTED_EDGE('',*,*,#66679,.T.); +#66679 = EDGE_CURVE('',#66670,#66680,#66682,.T.); +#66680 = VERTEX_POINT('',#66681); +#66681 = CARTESIAN_POINT('',(6.145,-6.16,0.29)); +#66682 = LINE('',#66683,#66684); +#66683 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66684 = VECTOR('',#66685,1.); +#66685 = DIRECTION('',(0.,1.,-2.2E-16)); +#66686 = ORIENTED_EDGE('',*,*,#66687,.F.); +#66687 = EDGE_CURVE('',#66688,#66680,#66690,.T.); +#66688 = VERTEX_POINT('',#66689); +#66689 = CARTESIAN_POINT('',(5.175,-6.16,0.29)); +#66690 = LINE('',#66691,#66692); +#66691 = CARTESIAN_POINT('',(5.66,-6.16,0.29)); +#66692 = VECTOR('',#66693,1.); +#66693 = DIRECTION('',(1.,-2.2E-16,0.)); +#66694 = ORIENTED_EDGE('',*,*,#66695,.T.); +#66695 = EDGE_CURVE('',#66688,#66696,#66698,.T.); +#66696 = VERTEX_POINT('',#66697); +#66697 = CARTESIAN_POINT('',(5.175,-3.46,0.29)); +#66698 = LINE('',#66699,#66700); +#66699 = CARTESIAN_POINT('',(5.175,-5.674370483602,0.29)); +#66700 = VECTOR('',#66701,1.); +#66701 = DIRECTION('',(2.6E-16,1.,-1.1E-16)); +#66702 = ORIENTED_EDGE('',*,*,#66703,.F.); +#66703 = EDGE_CURVE('',#66704,#66696,#66706,.T.); +#66704 = VERTEX_POINT('',#66705); +#66705 = CARTESIAN_POINT('',(6.145,-3.46,0.29)); +#66706 = LINE('',#66707,#66708); +#66707 = CARTESIAN_POINT('',(5.66,-3.46,0.29)); +#66708 = VECTOR('',#66709,1.); +#66709 = DIRECTION('',(-1.,2.2E-16,0.)); +#66710 = ORIENTED_EDGE('',*,*,#66711,.T.); +#66711 = EDGE_CURVE('',#66704,#66712,#66714,.T.); +#66712 = VERTEX_POINT('',#66713); +#66713 = CARTESIAN_POINT('',(6.145,-2.26,0.29)); +#66714 = LINE('',#66715,#66716); +#66715 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66716 = VECTOR('',#66717,1.); +#66717 = DIRECTION('',(0.,1.,-2.2E-16)); +#66718 = ORIENTED_EDGE('',*,*,#66719,.F.); +#66719 = EDGE_CURVE('',#66720,#66712,#66722,.T.); +#66720 = VERTEX_POINT('',#66721); +#66721 = CARTESIAN_POINT('',(5.175,-2.26,0.29)); +#66722 = LINE('',#66723,#66724); +#66723 = CARTESIAN_POINT('',(5.66,-2.26,0.29)); +#66724 = VECTOR('',#66725,1.); +#66725 = DIRECTION('',(1.,-2.2E-16,0.)); +#66726 = ORIENTED_EDGE('',*,*,#66727,.F.); +#66727 = EDGE_CURVE('',#66728,#66720,#66730,.T.); +#66728 = VERTEX_POINT('',#66729); +#66729 = CARTESIAN_POINT('',(4.265,-2.26,0.29)); +#66730 = LINE('',#66731,#66732); +#66731 = CARTESIAN_POINT('',(5.66,-2.26,0.29)); +#66732 = VECTOR('',#66733,1.); +#66733 = DIRECTION('',(1.,0.,0.)); +#66734 = ORIENTED_EDGE('',*,*,#66735,.F.); +#66735 = EDGE_CURVE('',#66736,#66728,#66738,.T.); +#66736 = VERTEX_POINT('',#66737); +#66737 = CARTESIAN_POINT('',(4.265,-2.66,0.29)); +#66738 = LINE('',#66739,#66740); +#66739 = CARTESIAN_POINT('',(4.265,-5.435,0.29)); +#66740 = VECTOR('',#66741,1.); +#66741 = DIRECTION('',(0.,1.,-6.7E-16)); +#66742 = ORIENTED_EDGE('',*,*,#66743,.T.); +#66743 = EDGE_CURVE('',#66736,#66744,#66746,.T.); +#66744 = VERTEX_POINT('',#66745); +#66745 = CARTESIAN_POINT('',(4.265,-3.06,0.29)); +#66746 = CIRCLE('',#66747,0.2); +#66747 = AXIS2_PLACEMENT_3D('',#66748,#66749,#66750); +#66748 = CARTESIAN_POINT('',(4.265,-2.86,0.29)); +#66749 = DIRECTION('',(0.,-1.1E-16,-1.)); +#66750 = DIRECTION('',(1.,0.,0.)); +#66751 = ORIENTED_EDGE('',*,*,#66752,.F.); +#66752 = EDGE_CURVE('',#66753,#66744,#66755,.T.); +#66753 = VERTEX_POINT('',#66754); +#66754 = CARTESIAN_POINT('',(2.975,-3.06,0.29)); +#66755 = LINE('',#66756,#66757); +#66756 = CARTESIAN_POINT('',(5.205,-3.06,0.29)); +#66757 = VECTOR('',#66758,1.); +#66758 = DIRECTION('',(1.,0.,0.)); +#66759 = ORIENTED_EDGE('',*,*,#66760,.T.); +#66760 = EDGE_CURVE('',#66753,#66761,#66763,.T.); +#66761 = VERTEX_POINT('',#66762); +#66762 = CARTESIAN_POINT('',(1.685,-3.06,0.29)); +#66763 = LINE('',#66764,#66765); +#66764 = CARTESIAN_POINT('',(3.915,-3.06,0.29)); +#66765 = VECTOR('',#66766,1.); +#66766 = DIRECTION('',(-1.,2.2E-16,0.)); +#66767 = ORIENTED_EDGE('',*,*,#66768,.T.); +#66768 = EDGE_CURVE('',#66761,#66769,#66771,.T.); +#66769 = VERTEX_POINT('',#66770); +#66770 = CARTESIAN_POINT('',(1.685,-2.66,0.29)); +#66771 = CIRCLE('',#66772,0.2); +#66772 = AXIS2_PLACEMENT_3D('',#66773,#66774,#66775); +#66773 = CARTESIAN_POINT('',(1.685,-2.86,0.29)); +#66774 = DIRECTION('',(2.2E-16,1.741711239665E-48,-1.)); +#66775 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#66776 = ORIENTED_EDGE('',*,*,#66777,.T.); +#66777 = EDGE_CURVE('',#66769,#66778,#66780,.T.); +#66778 = VERTEX_POINT('',#66779); +#66779 = CARTESIAN_POINT('',(1.685,-2.26,0.29)); +#66780 = LINE('',#66781,#66782); +#66781 = CARTESIAN_POINT('',(1.685,-5.435,0.29)); +#66782 = VECTOR('',#66783,1.); +#66783 = DIRECTION('',(2.2E-16,1.,-7.8E-16)); +#66784 = ORIENTED_EDGE('',*,*,#66785,.T.); +#66785 = EDGE_CURVE('',#66778,#66786,#66788,.T.); +#66786 = VERTEX_POINT('',#66787); +#66787 = CARTESIAN_POINT('',(0.775,-2.26,0.29)); +#66788 = LINE('',#66789,#66790); +#66789 = CARTESIAN_POINT('',(3.46,-2.26,0.29)); +#66790 = VECTOR('',#66791,1.); +#66791 = DIRECTION('',(-1.,2.2E-16,0.)); +#66792 = ORIENTED_EDGE('',*,*,#66793,.T.); +#66793 = EDGE_CURVE('',#66786,#66794,#66796,.T.); +#66794 = VERTEX_POINT('',#66795); +#66795 = CARTESIAN_POINT('',(-0.195,-2.26,0.29)); +#66796 = LINE('',#66797,#66798); +#66797 = CARTESIAN_POINT('',(3.46,-2.26,0.29)); +#66798 = VECTOR('',#66799,1.); +#66799 = DIRECTION('',(-1.,0.,0.)); +#66800 = ORIENTED_EDGE('',*,*,#66801,.F.); +#66801 = EDGE_CURVE('',#66802,#66794,#66804,.T.); +#66802 = VERTEX_POINT('',#66803); +#66803 = CARTESIAN_POINT('',(-0.195,-3.46,0.29)); +#66804 = LINE('',#66805,#66806); +#66805 = CARTESIAN_POINT('',(-0.195,-8.61,0.29)); +#66806 = VECTOR('',#66807,1.); +#66807 = DIRECTION('',(0.,1.,-2.2E-16)); +#66808 = ORIENTED_EDGE('',*,*,#66809,.T.); +#66809 = EDGE_CURVE('',#66802,#66810,#66812,.T.); +#66810 = VERTEX_POINT('',#66811); +#66811 = CARTESIAN_POINT('',(0.775,-3.46,0.29)); +#66812 = LINE('',#66813,#66814); +#66813 = CARTESIAN_POINT('',(3.46,-3.46,0.29)); +#66814 = VECTOR('',#66815,1.); +#66815 = DIRECTION('',(1.,0.,0.)); +#66816 = ORIENTED_EDGE('',*,*,#66817,.F.); +#66817 = EDGE_CURVE('',#66818,#66810,#66820,.T.); +#66818 = VERTEX_POINT('',#66819); +#66819 = CARTESIAN_POINT('',(0.775,-6.16,0.29)); +#66820 = LINE('',#66821,#66822); +#66821 = CARTESIAN_POINT('',(0.775,-5.674370483602,0.29)); +#66822 = VECTOR('',#66823,1.); +#66823 = DIRECTION('',(-4.E-17,1.,-7.8E-16)); +#66824 = ORIENTED_EDGE('',*,*,#66825,.T.); +#66825 = EDGE_CURVE('',#66818,#66826,#66828,.T.); +#66826 = VERTEX_POINT('',#66827); +#66827 = CARTESIAN_POINT('',(-0.195,-6.16,0.29)); +#66828 = LINE('',#66829,#66830); +#66829 = CARTESIAN_POINT('',(3.46,-6.16,0.29)); +#66830 = VECTOR('',#66831,1.); +#66831 = DIRECTION('',(-1.,0.,0.)); +#66832 = ORIENTED_EDGE('',*,*,#66833,.F.); +#66833 = EDGE_CURVE('',#66672,#66826,#66834,.T.); +#66834 = LINE('',#66835,#66836); +#66835 = CARTESIAN_POINT('',(-0.195,-8.61,0.29)); +#66836 = VECTOR('',#66837,1.); +#66837 = DIRECTION('',(0.,1.,-2.2E-16)); +#66838 = FACE_BOUND('',#66839,.F.); +#66839 = EDGE_LOOP('',(#66840)); +#66840 = ORIENTED_EDGE('',*,*,#66841,.T.); +#66841 = EDGE_CURVE('',#66842,#66842,#66844,.T.); +#66842 = VERTEX_POINT('',#66843); +#66843 = CARTESIAN_POINT('',(0.335,-2.85,0.29)); +#66844 = CIRCLE('',#66845,0.45); +#66845 = AXIS2_PLACEMENT_3D('',#66846,#66847,#66848); +#66846 = CARTESIAN_POINT('',(0.785,-2.85,0.29)); +#66847 = DIRECTION('',(2.2E-16,-8.9E-16,-1.)); +#66848 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#66849 = FACE_BOUND('',#66850,.F.); +#66850 = EDGE_LOOP('',(#66851)); +#66851 = ORIENTED_EDGE('',*,*,#66852,.F.); +#66852 = EDGE_CURVE('',#66853,#66853,#66855,.T.); +#66853 = VERTEX_POINT('',#66854); +#66854 = CARTESIAN_POINT('',(5.615,-2.85,0.29)); +#66855 = CIRCLE('',#66856,0.45); +#66856 = AXIS2_PLACEMENT_3D('',#66857,#66858,#66859); +#66857 = CARTESIAN_POINT('',(5.165,-2.85,0.29)); +#66858 = DIRECTION('',(-1.8901417092E-48,8.9E-16,1.)); +#66859 = DIRECTION('',(1.,-1.9E-16,1.691E-31)); +#66860 = PLANE('',#66861); +#66861 = AXIS2_PLACEMENT_3D('',#66862,#66863,#66864); +#66862 = CARTESIAN_POINT('',(6.145,-8.61,0.29)); +#66863 = DIRECTION('',(0.,2.2E-16,1.)); +#66864 = DIRECTION('',(-1.,0.,0.)); +#66865 = ADVANCED_FACE('',(#66866,#66927),#66997,.F.); +#66866 = FACE_BOUND('',#66867,.T.); +#66867 = EDGE_LOOP('',(#66868,#66879,#66887,#66894,#66895,#66904,#66912, + #66921)); +#66868 = ORIENTED_EDGE('',*,*,#66869,.T.); +#66869 = EDGE_CURVE('',#66870,#66872,#66874,.T.); +#66870 = VERTEX_POINT('',#66871); +#66871 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#66872 = VERTEX_POINT('',#66873); +#66873 = CARTESIAN_POINT('',(-1.495,-8.61,2.15)); +#66874 = CIRCLE('',#66875,1.3); +#66875 = AXIS2_PLACEMENT_3D('',#66876,#66877,#66878); +#66876 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#66877 = DIRECTION('',(0.,-1.,2.2E-16)); +#66878 = DIRECTION('',(1.,0.,0.)); +#66879 = ORIENTED_EDGE('',*,*,#66880,.F.); +#66880 = EDGE_CURVE('',#66881,#66872,#66883,.T.); +#66881 = VERTEX_POINT('',#66882); +#66882 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#66883 = LINE('',#66884,#66885); +#66884 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#66885 = VECTOR('',#66886,1.); +#66886 = DIRECTION('',(0.,2.2E-16,1.)); +#66887 = ORIENTED_EDGE('',*,*,#66888,.T.); +#66888 = EDGE_CURVE('',#66881,#66672,#66889,.T.); +#66889 = CIRCLE('',#66890,1.3); +#66890 = AXIS2_PLACEMENT_3D('',#66891,#66892,#66893); +#66891 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#66892 = DIRECTION('',(0.,-1.,2.2E-16)); +#66893 = DIRECTION('',(1.,0.,0.)); +#66894 = ORIENTED_EDGE('',*,*,#66669,.F.); +#66895 = ORIENTED_EDGE('',*,*,#66896,.T.); +#66896 = EDGE_CURVE('',#66670,#66897,#66899,.T.); +#66897 = VERTEX_POINT('',#66898); +#66898 = CARTESIAN_POINT('',(7.445,-8.61,1.59)); +#66899 = CIRCLE('',#66900,1.3); +#66900 = AXIS2_PLACEMENT_3D('',#66901,#66902,#66903); +#66901 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#66902 = DIRECTION('',(0.,-1.,2.2E-16)); +#66903 = DIRECTION('',(1.,0.,0.)); +#66904 = ORIENTED_EDGE('',*,*,#66905,.F.); +#66905 = EDGE_CURVE('',#66906,#66897,#66908,.T.); +#66906 = VERTEX_POINT('',#66907); +#66907 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#66908 = LINE('',#66909,#66910); +#66909 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#66910 = VECTOR('',#66911,1.); +#66911 = DIRECTION('',(0.,-2.2E-16,-1.)); +#66912 = ORIENTED_EDGE('',*,*,#66913,.T.); +#66913 = EDGE_CURVE('',#66906,#66914,#66916,.T.); +#66914 = VERTEX_POINT('',#66915); +#66915 = CARTESIAN_POINT('',(6.145,-8.61,3.45)); +#66916 = CIRCLE('',#66917,1.3); +#66917 = AXIS2_PLACEMENT_3D('',#66918,#66919,#66920); +#66918 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#66919 = DIRECTION('',(0.,-1.,2.2E-16)); +#66920 = DIRECTION('',(1.,0.,0.)); +#66921 = ORIENTED_EDGE('',*,*,#66922,.F.); +#66922 = EDGE_CURVE('',#66870,#66914,#66923,.T.); +#66923 = LINE('',#66924,#66925); +#66924 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#66925 = VECTOR('',#66926,1.); +#66926 = DIRECTION('',(1.,0.,0.)); +#66927 = FACE_BOUND('',#66928,.F.); +#66928 = EDGE_LOOP('',(#66929,#66940,#66948,#66957,#66965,#66974,#66982, + #66991)); +#66929 = ORIENTED_EDGE('',*,*,#66930,.T.); +#66930 = EDGE_CURVE('',#66931,#66933,#66935,.T.); +#66931 = VERTEX_POINT('',#66932); +#66932 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#66933 = VERTEX_POINT('',#66934); +#66934 = CARTESIAN_POINT('',(-1.195,-8.61,2.15)); +#66935 = CIRCLE('',#66936,1.); +#66936 = AXIS2_PLACEMENT_3D('',#66937,#66938,#66939); +#66937 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#66938 = DIRECTION('',(0.,-1.,2.2E-16)); +#66939 = DIRECTION('',(1.,0.,0.)); +#66940 = ORIENTED_EDGE('',*,*,#66941,.F.); +#66941 = EDGE_CURVE('',#66942,#66933,#66944,.T.); +#66942 = VERTEX_POINT('',#66943); +#66943 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#66944 = LINE('',#66945,#66946); +#66945 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#66946 = VECTOR('',#66947,1.); +#66947 = DIRECTION('',(0.,2.2E-16,1.)); +#66948 = ORIENTED_EDGE('',*,*,#66949,.T.); +#66949 = EDGE_CURVE('',#66942,#66950,#66952,.T.); +#66950 = VERTEX_POINT('',#66951); +#66951 = CARTESIAN_POINT('',(-0.195,-8.61,0.59)); +#66952 = CIRCLE('',#66953,1.); +#66953 = AXIS2_PLACEMENT_3D('',#66954,#66955,#66956); +#66954 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#66955 = DIRECTION('',(0.,-1.,2.2E-16)); +#66956 = DIRECTION('',(1.,0.,0.)); +#66957 = ORIENTED_EDGE('',*,*,#66958,.F.); +#66958 = EDGE_CURVE('',#66959,#66950,#66961,.T.); +#66959 = VERTEX_POINT('',#66960); +#66960 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#66961 = LINE('',#66962,#66963); +#66962 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#66963 = VECTOR('',#66964,1.); +#66964 = DIRECTION('',(-1.,0.,0.)); +#66965 = ORIENTED_EDGE('',*,*,#66966,.T.); +#66966 = EDGE_CURVE('',#66959,#66967,#66969,.T.); +#66967 = VERTEX_POINT('',#66968); +#66968 = CARTESIAN_POINT('',(7.145,-8.61,1.59)); +#66969 = CIRCLE('',#66970,1.); +#66970 = AXIS2_PLACEMENT_3D('',#66971,#66972,#66973); +#66971 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#66972 = DIRECTION('',(0.,-1.,2.2E-16)); +#66973 = DIRECTION('',(1.,0.,0.)); +#66974 = ORIENTED_EDGE('',*,*,#66975,.F.); +#66975 = EDGE_CURVE('',#66976,#66967,#66978,.T.); +#66976 = VERTEX_POINT('',#66977); +#66977 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#66978 = LINE('',#66979,#66980); +#66979 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#66980 = VECTOR('',#66981,1.); +#66981 = DIRECTION('',(0.,-2.2E-16,-1.)); +#66982 = ORIENTED_EDGE('',*,*,#66983,.T.); +#66983 = EDGE_CURVE('',#66976,#66984,#66986,.T.); +#66984 = VERTEX_POINT('',#66985); +#66985 = CARTESIAN_POINT('',(6.145,-8.61,3.15)); +#66986 = CIRCLE('',#66987,1.); +#66987 = AXIS2_PLACEMENT_3D('',#66988,#66989,#66990); +#66988 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#66989 = DIRECTION('',(0.,-1.,2.2E-16)); +#66990 = DIRECTION('',(1.,0.,0.)); +#66991 = ORIENTED_EDGE('',*,*,#66992,.F.); +#66992 = EDGE_CURVE('',#66931,#66984,#66993,.T.); +#66993 = LINE('',#66994,#66995); +#66994 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#66995 = VECTOR('',#66996,1.); +#66996 = DIRECTION('',(1.,0.,0.)); +#66997 = PLANE('',#66998); +#66998 = AXIS2_PLACEMENT_3D('',#66999,#67000,#67001); +#66999 = CARTESIAN_POINT('',(2.975,-8.61,1.87)); +#67000 = DIRECTION('',(0.,1.,0.)); +#67001 = DIRECTION('',(0.,-0.,1.)); +#67002 = ADVANCED_FACE('',(#67003),#67022,.T.); +#67003 = FACE_BOUND('',#67004,.T.); +#67004 = EDGE_LOOP('',(#67005,#67006,#67007,#67016)); +#67005 = ORIENTED_EDGE('',*,*,#66896,.F.); +#67006 = ORIENTED_EDGE('',*,*,#66679,.T.); +#67007 = ORIENTED_EDGE('',*,*,#67008,.T.); +#67008 = EDGE_CURVE('',#66680,#67009,#67011,.T.); +#67009 = VERTEX_POINT('',#67010); +#67010 = CARTESIAN_POINT('',(7.445,-6.16,1.59)); +#67011 = CIRCLE('',#67012,1.3); +#67012 = AXIS2_PLACEMENT_3D('',#67013,#67014,#67015); +#67013 = CARTESIAN_POINT('',(6.145,-6.16,1.59)); +#67014 = DIRECTION('',(0.,-1.,1.1E-16)); +#67015 = DIRECTION('',(1.,0.,0.)); +#67016 = ORIENTED_EDGE('',*,*,#67017,.F.); +#67017 = EDGE_CURVE('',#66897,#67009,#67018,.T.); +#67018 = LINE('',#67019,#67020); +#67019 = CARTESIAN_POINT('',(7.445,-8.61,1.59)); +#67020 = VECTOR('',#67021,1.); +#67021 = DIRECTION('',(0.,1.,-2.2E-16)); +#67022 = CYLINDRICAL_SURFACE('',#67023,1.3); +#67023 = AXIS2_PLACEMENT_3D('',#67024,#67025,#67026); +#67024 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#67025 = DIRECTION('',(0.,-1.,2.2E-16)); +#67026 = DIRECTION('',(1.,0.,0.)); +#67027 = ADVANCED_FACE('',(#67028),#67047,.T.); +#67028 = FACE_BOUND('',#67029,.T.); +#67029 = EDGE_LOOP('',(#67030,#67031,#67039,#67046)); +#67030 = ORIENTED_EDGE('',*,*,#66888,.F.); +#67031 = ORIENTED_EDGE('',*,*,#67032,.T.); +#67032 = EDGE_CURVE('',#66881,#67033,#67035,.T.); +#67033 = VERTEX_POINT('',#67034); +#67034 = CARTESIAN_POINT('',(-1.495,-6.16,1.59)); +#67035 = LINE('',#67036,#67037); +#67036 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#67037 = VECTOR('',#67038,1.); +#67038 = DIRECTION('',(0.,1.,-2.2E-16)); +#67039 = ORIENTED_EDGE('',*,*,#67040,.T.); +#67040 = EDGE_CURVE('',#67033,#66826,#67041,.T.); +#67041 = CIRCLE('',#67042,1.3); +#67042 = AXIS2_PLACEMENT_3D('',#67043,#67044,#67045); +#67043 = CARTESIAN_POINT('',(-0.195,-6.16,1.59)); +#67044 = DIRECTION('',(0.,-1.,7.8E-16)); +#67045 = DIRECTION('',(1.,0.,0.)); +#67046 = ORIENTED_EDGE('',*,*,#66833,.F.); +#67047 = CYLINDRICAL_SURFACE('',#67048,1.3); +#67048 = AXIS2_PLACEMENT_3D('',#67049,#67050,#67051); +#67049 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#67050 = DIRECTION('',(0.,-1.,2.2E-16)); +#67051 = DIRECTION('',(1.,0.,0.)); +#67052 = ADVANCED_FACE('',(#67053),#67104,.F.); +#67053 = FACE_BOUND('',#67054,.F.); +#67054 = EDGE_LOOP('',(#67055,#67063,#67064,#67065,#67073,#67081,#67089, + #67098)); +#67055 = ORIENTED_EDGE('',*,*,#67056,.F.); +#67056 = EDGE_CURVE('',#66688,#67057,#67059,.T.); +#67057 = VERTEX_POINT('',#67058); +#67058 = CARTESIAN_POINT('',(5.175,-6.16,0.59)); +#67059 = LINE('',#67060,#67061); +#67060 = CARTESIAN_POINT('',(5.175,-6.16,-1.E-02)); +#67061 = VECTOR('',#67062,1.); +#67062 = DIRECTION('',(0.,2.2E-16,1.)); +#67063 = ORIENTED_EDGE('',*,*,#66687,.T.); +#67064 = ORIENTED_EDGE('',*,*,#67008,.T.); +#67065 = ORIENTED_EDGE('',*,*,#67066,.T.); +#67066 = EDGE_CURVE('',#67009,#67067,#67069,.T.); +#67067 = VERTEX_POINT('',#67068); +#67068 = CARTESIAN_POINT('',(7.445,-6.16,1.615)); +#67069 = LINE('',#67070,#67071); +#67070 = CARTESIAN_POINT('',(7.445,-6.16,1.07)); +#67071 = VECTOR('',#67072,1.); +#67072 = DIRECTION('',(0.,3.3E-16,1.)); +#67073 = ORIENTED_EDGE('',*,*,#67074,.F.); +#67074 = EDGE_CURVE('',#67075,#67067,#67077,.T.); +#67075 = VERTEX_POINT('',#67076); +#67076 = CARTESIAN_POINT('',(7.145,-6.16,1.615)); +#67077 = LINE('',#67078,#67079); +#67078 = CARTESIAN_POINT('',(5.175,-6.16,1.615)); +#67079 = VECTOR('',#67080,1.); +#67080 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#67081 = ORIENTED_EDGE('',*,*,#67082,.F.); +#67082 = EDGE_CURVE('',#67083,#67075,#67085,.T.); +#67083 = VERTEX_POINT('',#67084); +#67084 = CARTESIAN_POINT('',(7.145,-6.16,1.59)); +#67085 = LINE('',#67086,#67087); +#67086 = CARTESIAN_POINT('',(7.145,-6.16,1.07)); +#67087 = VECTOR('',#67088,1.); +#67088 = DIRECTION('',(0.,3.3E-16,1.)); +#67089 = ORIENTED_EDGE('',*,*,#67090,.F.); +#67090 = EDGE_CURVE('',#67091,#67083,#67093,.T.); +#67091 = VERTEX_POINT('',#67092); +#67092 = CARTESIAN_POINT('',(6.145,-6.16,0.59)); +#67093 = CIRCLE('',#67094,1.); +#67094 = AXIS2_PLACEMENT_3D('',#67095,#67096,#67097); +#67095 = CARTESIAN_POINT('',(6.145,-6.16,1.59)); +#67096 = DIRECTION('',(0.,-1.,1.1E-16)); +#67097 = DIRECTION('',(1.,0.,0.)); +#67098 = ORIENTED_EDGE('',*,*,#67099,.F.); +#67099 = EDGE_CURVE('',#67057,#67091,#67100,.T.); +#67100 = LINE('',#67101,#67102); +#67101 = CARTESIAN_POINT('',(5.66,-6.16,0.59)); +#67102 = VECTOR('',#67103,1.); +#67103 = DIRECTION('',(1.,-2.2E-16,0.)); +#67104 = PLANE('',#67105); +#67105 = AXIS2_PLACEMENT_3D('',#67106,#67107,#67108); +#67106 = CARTESIAN_POINT('',(5.175,-6.16,-1.E-02)); +#67107 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#67108 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#67109 = ADVANCED_FACE('',(#67110),#67161,.F.); +#67110 = FACE_BOUND('',#67111,.T.); +#67111 = EDGE_LOOP('',(#67112,#67120,#67121,#67122,#67130,#67138,#67146, + #67155)); +#67112 = ORIENTED_EDGE('',*,*,#67113,.F.); +#67113 = EDGE_CURVE('',#66818,#67114,#67116,.T.); +#67114 = VERTEX_POINT('',#67115); +#67115 = CARTESIAN_POINT('',(0.775,-6.16,0.59)); +#67116 = LINE('',#67117,#67118); +#67117 = CARTESIAN_POINT('',(0.775,-6.16,-1.E-02)); +#67118 = VECTOR('',#67119,1.); +#67119 = DIRECTION('',(2.2E-16,2.2E-16,1.)); +#67120 = ORIENTED_EDGE('',*,*,#66825,.T.); +#67121 = ORIENTED_EDGE('',*,*,#67040,.F.); +#67122 = ORIENTED_EDGE('',*,*,#67123,.T.); +#67123 = EDGE_CURVE('',#67033,#67124,#67126,.T.); +#67124 = VERTEX_POINT('',#67125); +#67125 = CARTESIAN_POINT('',(-1.495,-6.16,1.615)); +#67126 = LINE('',#67127,#67128); +#67127 = CARTESIAN_POINT('',(-1.495,-6.16,0.79)); +#67128 = VECTOR('',#67129,1.); +#67129 = DIRECTION('',(0.,2.2E-16,1.)); +#67130 = ORIENTED_EDGE('',*,*,#67131,.F.); +#67131 = EDGE_CURVE('',#67132,#67124,#67134,.T.); +#67132 = VERTEX_POINT('',#67133); +#67133 = CARTESIAN_POINT('',(-1.195,-6.16,1.615)); +#67134 = LINE('',#67135,#67136); +#67135 = CARTESIAN_POINT('',(0.775,-6.16,1.615)); +#67136 = VECTOR('',#67137,1.); +#67137 = DIRECTION('',(-1.,0.,6.E-17)); +#67138 = ORIENTED_EDGE('',*,*,#67139,.F.); +#67139 = EDGE_CURVE('',#67140,#67132,#67142,.T.); +#67140 = VERTEX_POINT('',#67141); +#67141 = CARTESIAN_POINT('',(-1.195,-6.16,1.59)); +#67142 = LINE('',#67143,#67144); +#67143 = CARTESIAN_POINT('',(-1.195,-6.16,0.79)); +#67144 = VECTOR('',#67145,1.); +#67145 = DIRECTION('',(0.,2.2E-16,1.)); +#67146 = ORIENTED_EDGE('',*,*,#67147,.T.); +#67147 = EDGE_CURVE('',#67140,#67148,#67150,.T.); +#67148 = VERTEX_POINT('',#67149); +#67149 = CARTESIAN_POINT('',(-0.195,-6.16,0.59)); +#67150 = CIRCLE('',#67151,1.); +#67151 = AXIS2_PLACEMENT_3D('',#67152,#67153,#67154); +#67152 = CARTESIAN_POINT('',(-0.195,-6.16,1.59)); +#67153 = DIRECTION('',(0.,-1.,7.8E-16)); +#67154 = DIRECTION('',(1.,0.,0.)); +#67155 = ORIENTED_EDGE('',*,*,#67156,.F.); +#67156 = EDGE_CURVE('',#67114,#67148,#67157,.T.); +#67157 = LINE('',#67158,#67159); +#67158 = CARTESIAN_POINT('',(3.46,-6.16,0.59)); +#67159 = VECTOR('',#67160,1.); +#67160 = DIRECTION('',(-1.,0.,0.)); +#67161 = PLANE('',#67162); +#67162 = AXIS2_PLACEMENT_3D('',#67163,#67164,#67165); +#67163 = CARTESIAN_POINT('',(0.775,-6.16,-1.E-02)); +#67164 = DIRECTION('',(0.,-1.,3.3E-16)); +#67165 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#67166 = ADVANCED_FACE('',(#67167),#67185,.T.); +#67167 = FACE_BOUND('',#67168,.T.); +#67168 = EDGE_LOOP('',(#67169,#67177,#67178,#67179)); +#67169 = ORIENTED_EDGE('',*,*,#67170,.F.); +#67170 = EDGE_CURVE('',#67057,#67171,#67173,.T.); +#67171 = VERTEX_POINT('',#67172); +#67172 = CARTESIAN_POINT('',(5.175,-3.46,0.59)); +#67173 = LINE('',#67174,#67175); +#67174 = CARTESIAN_POINT('',(5.175,-5.674370483602,0.59)); +#67175 = VECTOR('',#67176,1.); +#67176 = DIRECTION('',(2.6E-16,1.,-1.1E-16)); +#67177 = ORIENTED_EDGE('',*,*,#67056,.F.); +#67178 = ORIENTED_EDGE('',*,*,#66695,.T.); +#67179 = ORIENTED_EDGE('',*,*,#67180,.F.); +#67180 = EDGE_CURVE('',#67171,#66696,#67181,.T.); +#67181 = LINE('',#67182,#67183); +#67182 = CARTESIAN_POINT('',(5.175,-3.46,1.615)); +#67183 = VECTOR('',#67184,1.); +#67184 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67185 = PLANE('',#67186); +#67186 = AXIS2_PLACEMENT_3D('',#67187,#67188,#67189); +#67187 = CARTESIAN_POINT('',(5.175,-2.738740967204,0.845590605892)); +#67188 = DIRECTION('',(1.,-2.6E-16,2.7E-16)); +#67189 = DIRECTION('',(-2.7E-16,2.2E-16,1.)); +#67190 = ADVANCED_FACE('',(#67191),#67209,.T.); +#67191 = FACE_BOUND('',#67192,.F.); +#67192 = EDGE_LOOP('',(#67193,#67201,#67202,#67203)); +#67193 = ORIENTED_EDGE('',*,*,#67194,.F.); +#67194 = EDGE_CURVE('',#67114,#67195,#67197,.T.); +#67195 = VERTEX_POINT('',#67196); +#67196 = CARTESIAN_POINT('',(0.775,-3.46,0.59)); +#67197 = LINE('',#67198,#67199); +#67198 = CARTESIAN_POINT('',(0.775,-5.674370483602,0.59)); +#67199 = VECTOR('',#67200,1.); +#67200 = DIRECTION('',(-4.E-17,1.,-7.8E-16)); +#67201 = ORIENTED_EDGE('',*,*,#67113,.F.); +#67202 = ORIENTED_EDGE('',*,*,#66817,.T.); +#67203 = ORIENTED_EDGE('',*,*,#67204,.F.); +#67204 = EDGE_CURVE('',#67195,#66810,#67205,.T.); +#67205 = LINE('',#67206,#67207); +#67206 = CARTESIAN_POINT('',(0.775,-3.46,1.615)); +#67207 = VECTOR('',#67208,1.); +#67208 = DIRECTION('',(-2.2E-16,-2.2E-16,-1.)); +#67209 = PLANE('',#67210); +#67210 = AXIS2_PLACEMENT_3D('',#67211,#67212,#67213); +#67211 = CARTESIAN_POINT('',(0.775,-2.738740967204,0.845590605892)); +#67212 = DIRECTION('',(-1.,-4.E-17,5.E-17)); +#67213 = DIRECTION('',(-5.E-17,-2.2E-16,-1.)); +#67214 = ADVANCED_FACE('',(#67215),#67267,.F.); +#67215 = FACE_BOUND('',#67216,.F.); +#67216 = EDGE_LOOP('',(#67217,#67227,#67235,#67243,#67250,#67251,#67252, + #67260)); +#67217 = ORIENTED_EDGE('',*,*,#67218,.F.); +#67218 = EDGE_CURVE('',#67219,#67221,#67223,.T.); +#67219 = VERTEX_POINT('',#67220); +#67220 = CARTESIAN_POINT('',(7.145,-3.46,1.615)); +#67221 = VERTEX_POINT('',#67222); +#67222 = CARTESIAN_POINT('',(7.145,-3.46,1.59)); +#67223 = LINE('',#67224,#67225); +#67224 = CARTESIAN_POINT('',(7.145,-3.46,1.8825)); +#67225 = VECTOR('',#67226,1.); +#67226 = DIRECTION('',(0.,-3.3E-16,-1.)); +#67227 = ORIENTED_EDGE('',*,*,#67228,.T.); +#67228 = EDGE_CURVE('',#67219,#67229,#67231,.T.); +#67229 = VERTEX_POINT('',#67230); +#67230 = CARTESIAN_POINT('',(7.445,-3.46,1.615)); +#67231 = LINE('',#67232,#67233); +#67232 = CARTESIAN_POINT('',(5.175,-3.46,1.615)); +#67233 = VECTOR('',#67234,1.); +#67234 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#67235 = ORIENTED_EDGE('',*,*,#67236,.T.); +#67236 = EDGE_CURVE('',#67229,#67237,#67239,.T.); +#67237 = VERTEX_POINT('',#67238); +#67238 = CARTESIAN_POINT('',(7.445,-3.46,1.59)); +#67239 = LINE('',#67240,#67241); +#67240 = CARTESIAN_POINT('',(7.445,-3.46,1.8825)); +#67241 = VECTOR('',#67242,1.); +#67242 = DIRECTION('',(0.,-3.3E-16,-1.)); +#67243 = ORIENTED_EDGE('',*,*,#67244,.F.); +#67244 = EDGE_CURVE('',#66704,#67237,#67245,.T.); +#67245 = CIRCLE('',#67246,1.3); +#67246 = AXIS2_PLACEMENT_3D('',#67247,#67248,#67249); +#67247 = CARTESIAN_POINT('',(6.145,-3.46,1.59)); +#67248 = DIRECTION('',(0.,-1.,1.1E-16)); +#67249 = DIRECTION('',(1.,0.,0.)); +#67250 = ORIENTED_EDGE('',*,*,#66703,.T.); +#67251 = ORIENTED_EDGE('',*,*,#67180,.F.); +#67252 = ORIENTED_EDGE('',*,*,#67253,.F.); +#67253 = EDGE_CURVE('',#67254,#67171,#67256,.T.); +#67254 = VERTEX_POINT('',#67255); +#67255 = CARTESIAN_POINT('',(6.145,-3.46,0.59)); +#67256 = LINE('',#67257,#67258); +#67257 = CARTESIAN_POINT('',(5.66,-3.46,0.59)); +#67258 = VECTOR('',#67259,1.); +#67259 = DIRECTION('',(-1.,2.2E-16,0.)); +#67260 = ORIENTED_EDGE('',*,*,#67261,.T.); +#67261 = EDGE_CURVE('',#67254,#67221,#67262,.T.); +#67262 = CIRCLE('',#67263,1.); +#67263 = AXIS2_PLACEMENT_3D('',#67264,#67265,#67266); +#67264 = CARTESIAN_POINT('',(6.145,-3.46,1.59)); +#67265 = DIRECTION('',(0.,-1.,1.1E-16)); +#67266 = DIRECTION('',(1.,0.,0.)); +#67267 = PLANE('',#67268); +#67268 = AXIS2_PLACEMENT_3D('',#67269,#67270,#67271); +#67269 = CARTESIAN_POINT('',(5.175,-3.46,1.615)); +#67270 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#67271 = DIRECTION('',(2.2E-16,-3.3E-16,-1.)); +#67272 = ADVANCED_FACE('',(#67273),#67325,.F.); +#67273 = FACE_BOUND('',#67274,.T.); +#67274 = EDGE_LOOP('',(#67275,#67285,#67293,#67301,#67308,#67309,#67310, + #67318)); +#67275 = ORIENTED_EDGE('',*,*,#67276,.F.); +#67276 = EDGE_CURVE('',#67277,#67279,#67281,.T.); +#67277 = VERTEX_POINT('',#67278); +#67278 = CARTESIAN_POINT('',(-1.195,-3.46,1.615)); +#67279 = VERTEX_POINT('',#67280); +#67280 = CARTESIAN_POINT('',(-1.195,-3.46,1.59)); +#67281 = LINE('',#67282,#67283); +#67282 = CARTESIAN_POINT('',(-1.195,-3.46,1.6025)); +#67283 = VECTOR('',#67284,1.); +#67284 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67285 = ORIENTED_EDGE('',*,*,#67286,.T.); +#67286 = EDGE_CURVE('',#67277,#67287,#67289,.T.); +#67287 = VERTEX_POINT('',#67288); +#67288 = CARTESIAN_POINT('',(-1.495,-3.46,1.615)); +#67289 = LINE('',#67290,#67291); +#67290 = CARTESIAN_POINT('',(0.775,-3.46,1.615)); +#67291 = VECTOR('',#67292,1.); +#67292 = DIRECTION('',(-1.,0.,6.E-17)); +#67293 = ORIENTED_EDGE('',*,*,#67294,.T.); +#67294 = EDGE_CURVE('',#67287,#67295,#67297,.T.); +#67295 = VERTEX_POINT('',#67296); +#67296 = CARTESIAN_POINT('',(-1.495,-3.46,1.59)); +#67297 = LINE('',#67298,#67299); +#67298 = CARTESIAN_POINT('',(-1.495,-3.46,1.6025)); +#67299 = VECTOR('',#67300,1.); +#67300 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67301 = ORIENTED_EDGE('',*,*,#67302,.T.); +#67302 = EDGE_CURVE('',#67295,#66802,#67303,.T.); +#67303 = CIRCLE('',#67304,1.3); +#67304 = AXIS2_PLACEMENT_3D('',#67305,#67306,#67307); +#67305 = CARTESIAN_POINT('',(-0.195,-3.46,1.59)); +#67306 = DIRECTION('',(0.,-1.,7.8E-16)); +#67307 = DIRECTION('',(1.,0.,0.)); +#67308 = ORIENTED_EDGE('',*,*,#66809,.T.); +#67309 = ORIENTED_EDGE('',*,*,#67204,.F.); +#67310 = ORIENTED_EDGE('',*,*,#67311,.F.); +#67311 = EDGE_CURVE('',#67312,#67195,#67314,.T.); +#67312 = VERTEX_POINT('',#67313); +#67313 = CARTESIAN_POINT('',(-0.195,-3.46,0.59)); +#67314 = LINE('',#67315,#67316); +#67315 = CARTESIAN_POINT('',(3.46,-3.46,0.59)); +#67316 = VECTOR('',#67317,1.); +#67317 = DIRECTION('',(1.,0.,0.)); +#67318 = ORIENTED_EDGE('',*,*,#67319,.F.); +#67319 = EDGE_CURVE('',#67279,#67312,#67320,.T.); +#67320 = CIRCLE('',#67321,1.); +#67321 = AXIS2_PLACEMENT_3D('',#67322,#67323,#67324); +#67322 = CARTESIAN_POINT('',(-0.195,-3.46,1.59)); +#67323 = DIRECTION('',(0.,-1.,7.8E-16)); +#67324 = DIRECTION('',(1.,0.,0.)); +#67325 = PLANE('',#67326); +#67326 = AXIS2_PLACEMENT_3D('',#67327,#67328,#67329); +#67327 = CARTESIAN_POINT('',(0.775,-3.46,1.615)); +#67328 = DIRECTION('',(0.,1.,-3.3E-16)); +#67329 = DIRECTION('',(0.,3.3E-16,1.)); +#67330 = ADVANCED_FACE('',(#67331),#67350,.T.); +#67331 = FACE_BOUND('',#67332,.T.); +#67332 = EDGE_LOOP('',(#67333,#67334,#67335,#67344)); +#67333 = ORIENTED_EDGE('',*,*,#67244,.F.); +#67334 = ORIENTED_EDGE('',*,*,#66711,.T.); +#67335 = ORIENTED_EDGE('',*,*,#67336,.T.); +#67336 = EDGE_CURVE('',#66712,#67337,#67339,.T.); +#67337 = VERTEX_POINT('',#67338); +#67338 = CARTESIAN_POINT('',(7.445,-2.26,1.59)); +#67339 = CIRCLE('',#67340,1.3); +#67340 = AXIS2_PLACEMENT_3D('',#67341,#67342,#67343); +#67341 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#67342 = DIRECTION('',(0.,-1.,1.1E-16)); +#67343 = DIRECTION('',(1.,0.,0.)); +#67344 = ORIENTED_EDGE('',*,*,#67345,.F.); +#67345 = EDGE_CURVE('',#67237,#67337,#67346,.T.); +#67346 = LINE('',#67347,#67348); +#67347 = CARTESIAN_POINT('',(7.445,-8.61,1.59)); +#67348 = VECTOR('',#67349,1.); +#67349 = DIRECTION('',(0.,1.,-2.2E-16)); +#67350 = CYLINDRICAL_SURFACE('',#67351,1.3); +#67351 = AXIS2_PLACEMENT_3D('',#67352,#67353,#67354); +#67352 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#67353 = DIRECTION('',(0.,-1.,2.2E-16)); +#67354 = DIRECTION('',(1.,0.,0.)); +#67355 = ADVANCED_FACE('',(#67356),#67375,.T.); +#67356 = FACE_BOUND('',#67357,.T.); +#67357 = EDGE_LOOP('',(#67358,#67359,#67367,#67374)); +#67358 = ORIENTED_EDGE('',*,*,#67302,.F.); +#67359 = ORIENTED_EDGE('',*,*,#67360,.T.); +#67360 = EDGE_CURVE('',#67295,#67361,#67363,.T.); +#67361 = VERTEX_POINT('',#67362); +#67362 = CARTESIAN_POINT('',(-1.495,-2.26,1.59)); +#67363 = LINE('',#67364,#67365); +#67364 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#67365 = VECTOR('',#67366,1.); +#67366 = DIRECTION('',(0.,1.,-2.2E-16)); +#67367 = ORIENTED_EDGE('',*,*,#67368,.T.); +#67368 = EDGE_CURVE('',#67361,#66794,#67369,.T.); +#67369 = CIRCLE('',#67370,1.3); +#67370 = AXIS2_PLACEMENT_3D('',#67371,#67372,#67373); +#67371 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#67372 = DIRECTION('',(0.,-1.,7.8E-16)); +#67373 = DIRECTION('',(1.,0.,0.)); +#67374 = ORIENTED_EDGE('',*,*,#66801,.F.); +#67375 = CYLINDRICAL_SURFACE('',#67376,1.3); +#67376 = AXIS2_PLACEMENT_3D('',#67377,#67378,#67379); +#67377 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#67378 = DIRECTION('',(0.,-1.,2.2E-16)); +#67379 = DIRECTION('',(1.,0.,0.)); +#67380 = ADVANCED_FACE('',(#67381),#67432,.F.); +#67381 = FACE_BOUND('',#67382,.F.); +#67382 = EDGE_LOOP('',(#67383,#67391,#67392,#67393,#67401,#67409,#67417, + #67426)); +#67383 = ORIENTED_EDGE('',*,*,#67384,.F.); +#67384 = EDGE_CURVE('',#66720,#67385,#67387,.T.); +#67385 = VERTEX_POINT('',#67386); +#67386 = CARTESIAN_POINT('',(5.175,-2.26,0.59)); +#67387 = LINE('',#67388,#67389); +#67388 = CARTESIAN_POINT('',(5.175,-2.26,-1.E-02)); +#67389 = VECTOR('',#67390,1.); +#67390 = DIRECTION('',(0.,2.2E-16,1.)); +#67391 = ORIENTED_EDGE('',*,*,#66719,.T.); +#67392 = ORIENTED_EDGE('',*,*,#67336,.T.); +#67393 = ORIENTED_EDGE('',*,*,#67394,.T.); +#67394 = EDGE_CURVE('',#67337,#67395,#67397,.T.); +#67395 = VERTEX_POINT('',#67396); +#67396 = CARTESIAN_POINT('',(7.445,-2.26,1.615)); +#67397 = LINE('',#67398,#67399); +#67398 = CARTESIAN_POINT('',(7.445,-2.26,1.07)); +#67399 = VECTOR('',#67400,1.); +#67400 = DIRECTION('',(0.,3.3E-16,1.)); +#67401 = ORIENTED_EDGE('',*,*,#67402,.F.); +#67402 = EDGE_CURVE('',#67403,#67395,#67405,.T.); +#67403 = VERTEX_POINT('',#67404); +#67404 = CARTESIAN_POINT('',(7.145,-2.26,1.615)); +#67405 = LINE('',#67406,#67407); +#67406 = CARTESIAN_POINT('',(5.175,-2.26,1.615)); +#67407 = VECTOR('',#67408,1.); +#67408 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#67409 = ORIENTED_EDGE('',*,*,#67410,.F.); +#67410 = EDGE_CURVE('',#67411,#67403,#67413,.T.); +#67411 = VERTEX_POINT('',#67412); +#67412 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#67413 = LINE('',#67414,#67415); +#67414 = CARTESIAN_POINT('',(7.145,-2.26,1.07)); +#67415 = VECTOR('',#67416,1.); +#67416 = DIRECTION('',(0.,3.3E-16,1.)); +#67417 = ORIENTED_EDGE('',*,*,#67418,.F.); +#67418 = EDGE_CURVE('',#67419,#67411,#67421,.T.); +#67419 = VERTEX_POINT('',#67420); +#67420 = CARTESIAN_POINT('',(6.145,-2.26,0.59)); +#67421 = CIRCLE('',#67422,1.); +#67422 = AXIS2_PLACEMENT_3D('',#67423,#67424,#67425); +#67423 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#67424 = DIRECTION('',(0.,-1.,1.1E-16)); +#67425 = DIRECTION('',(1.,0.,0.)); +#67426 = ORIENTED_EDGE('',*,*,#67427,.F.); +#67427 = EDGE_CURVE('',#67385,#67419,#67428,.T.); +#67428 = LINE('',#67429,#67430); +#67429 = CARTESIAN_POINT('',(5.66,-2.26,0.59)); +#67430 = VECTOR('',#67431,1.); +#67431 = DIRECTION('',(1.,-2.2E-16,0.)); +#67432 = PLANE('',#67433); +#67433 = AXIS2_PLACEMENT_3D('',#67434,#67435,#67436); +#67434 = CARTESIAN_POINT('',(5.175,-2.26,-1.E-02)); +#67435 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#67436 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#67437 = ADVANCED_FACE('',(#67438),#67489,.F.); +#67438 = FACE_BOUND('',#67439,.T.); +#67439 = EDGE_LOOP('',(#67440,#67448,#67449,#67450,#67458,#67466,#67474, + #67483)); +#67440 = ORIENTED_EDGE('',*,*,#67441,.F.); +#67441 = EDGE_CURVE('',#66786,#67442,#67444,.T.); +#67442 = VERTEX_POINT('',#67443); +#67443 = CARTESIAN_POINT('',(0.775,-2.26,0.59)); +#67444 = LINE('',#67445,#67446); +#67445 = CARTESIAN_POINT('',(0.775,-2.26,-1.E-02)); +#67446 = VECTOR('',#67447,1.); +#67447 = DIRECTION('',(2.2E-16,2.2E-16,1.)); +#67448 = ORIENTED_EDGE('',*,*,#66793,.T.); +#67449 = ORIENTED_EDGE('',*,*,#67368,.F.); +#67450 = ORIENTED_EDGE('',*,*,#67451,.T.); +#67451 = EDGE_CURVE('',#67361,#67452,#67454,.T.); +#67452 = VERTEX_POINT('',#67453); +#67453 = CARTESIAN_POINT('',(-1.495,-2.26,1.615)); +#67454 = LINE('',#67455,#67456); +#67455 = CARTESIAN_POINT('',(-1.495,-2.26,0.79)); +#67456 = VECTOR('',#67457,1.); +#67457 = DIRECTION('',(0.,2.2E-16,1.)); +#67458 = ORIENTED_EDGE('',*,*,#67459,.F.); +#67459 = EDGE_CURVE('',#67460,#67452,#67462,.T.); +#67460 = VERTEX_POINT('',#67461); +#67461 = CARTESIAN_POINT('',(-1.195,-2.26,1.615)); +#67462 = LINE('',#67463,#67464); +#67463 = CARTESIAN_POINT('',(0.775,-2.26,1.615)); +#67464 = VECTOR('',#67465,1.); +#67465 = DIRECTION('',(-1.,0.,6.E-17)); +#67466 = ORIENTED_EDGE('',*,*,#67467,.F.); +#67467 = EDGE_CURVE('',#67468,#67460,#67470,.T.); +#67468 = VERTEX_POINT('',#67469); +#67469 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#67470 = LINE('',#67471,#67472); +#67471 = CARTESIAN_POINT('',(-1.195,-2.26,0.79)); +#67472 = VECTOR('',#67473,1.); +#67473 = DIRECTION('',(0.,2.2E-16,1.)); +#67474 = ORIENTED_EDGE('',*,*,#67475,.T.); +#67475 = EDGE_CURVE('',#67468,#67476,#67478,.T.); +#67476 = VERTEX_POINT('',#67477); +#67477 = CARTESIAN_POINT('',(-0.195,-2.26,0.59)); +#67478 = CIRCLE('',#67479,1.); +#67479 = AXIS2_PLACEMENT_3D('',#67480,#67481,#67482); +#67480 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#67481 = DIRECTION('',(0.,-1.,7.8E-16)); +#67482 = DIRECTION('',(1.,0.,0.)); +#67483 = ORIENTED_EDGE('',*,*,#67484,.F.); +#67484 = EDGE_CURVE('',#67442,#67476,#67485,.T.); +#67485 = LINE('',#67486,#67487); +#67486 = CARTESIAN_POINT('',(3.46,-2.26,0.59)); +#67487 = VECTOR('',#67488,1.); +#67488 = DIRECTION('',(-1.,0.,0.)); +#67489 = PLANE('',#67490); +#67490 = AXIS2_PLACEMENT_3D('',#67491,#67492,#67493); +#67491 = CARTESIAN_POINT('',(0.775,-2.26,-1.E-02)); +#67492 = DIRECTION('',(0.,-1.,3.3E-16)); +#67493 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#67494 = ADVANCED_FACE('',(#67495),#67513,.F.); +#67495 = FACE_BOUND('',#67496,.F.); +#67496 = EDGE_LOOP('',(#67497,#67498,#67499,#67507)); +#67497 = ORIENTED_EDGE('',*,*,#66727,.T.); +#67498 = ORIENTED_EDGE('',*,*,#67384,.T.); +#67499 = ORIENTED_EDGE('',*,*,#67500,.F.); +#67500 = EDGE_CURVE('',#67501,#67385,#67503,.T.); +#67501 = VERTEX_POINT('',#67502); +#67502 = CARTESIAN_POINT('',(4.265,-2.26,0.59)); +#67503 = LINE('',#67504,#67505); +#67504 = CARTESIAN_POINT('',(5.66,-2.26,0.59)); +#67505 = VECTOR('',#67506,1.); +#67506 = DIRECTION('',(1.,0.,0.)); +#67507 = ORIENTED_EDGE('',*,*,#67508,.F.); +#67508 = EDGE_CURVE('',#66728,#67501,#67509,.T.); +#67509 = LINE('',#67510,#67511); +#67510 = CARTESIAN_POINT('',(4.265,-2.26,-1.E-02)); +#67511 = VECTOR('',#67512,1.); +#67512 = DIRECTION('',(0.,1.1E-16,1.)); +#67513 = PLANE('',#67514); +#67514 = AXIS2_PLACEMENT_3D('',#67515,#67516,#67517); +#67515 = CARTESIAN_POINT('',(5.175,-2.26,-1.E-02)); +#67516 = DIRECTION('',(0.,-1.,1.1E-16)); +#67517 = DIRECTION('',(-1.,0.,0.)); +#67518 = ADVANCED_FACE('',(#67519),#67537,.F.); +#67519 = FACE_BOUND('',#67520,.T.); +#67520 = EDGE_LOOP('',(#67521,#67522,#67523,#67531)); +#67521 = ORIENTED_EDGE('',*,*,#66785,.T.); +#67522 = ORIENTED_EDGE('',*,*,#67441,.T.); +#67523 = ORIENTED_EDGE('',*,*,#67524,.F.); +#67524 = EDGE_CURVE('',#67525,#67442,#67527,.T.); +#67525 = VERTEX_POINT('',#67526); +#67526 = CARTESIAN_POINT('',(1.685,-2.26,0.59)); +#67527 = LINE('',#67528,#67529); +#67528 = CARTESIAN_POINT('',(3.46,-2.26,0.59)); +#67529 = VECTOR('',#67530,1.); +#67530 = DIRECTION('',(-1.,2.2E-16,0.)); +#67531 = ORIENTED_EDGE('',*,*,#67532,.F.); +#67532 = EDGE_CURVE('',#66778,#67525,#67533,.T.); +#67533 = LINE('',#67534,#67535); +#67534 = CARTESIAN_POINT('',(1.685,-2.26,-1.E-02)); +#67535 = VECTOR('',#67536,1.); +#67536 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#67537 = PLANE('',#67538); +#67538 = AXIS2_PLACEMENT_3D('',#67539,#67540,#67541); +#67539 = CARTESIAN_POINT('',(0.775,-2.26,-1.E-02)); +#67540 = DIRECTION('',(-2.2E-16,-1.,1.1E-16)); +#67541 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67542 = ADVANCED_FACE('',(#67543),#67570,.T.); +#67543 = FACE_BOUND('',#67544,.T.); +#67544 = EDGE_LOOP('',(#67545,#67554,#67555,#67564)); +#67545 = ORIENTED_EDGE('',*,*,#67546,.T.); +#67546 = EDGE_CURVE('',#67547,#66728,#67549,.T.); +#67547 = VERTEX_POINT('',#67548); +#67548 = CARTESIAN_POINT('',(4.032559956043,-2.26,0.34153071713)); +#67549 = CIRCLE('',#67550,0.55); +#67550 = AXIS2_PLACEMENT_3D('',#67551,#67552,#67553); +#67551 = CARTESIAN_POINT('',(4.265,-2.26,0.84)); +#67552 = DIRECTION('',(0.,-1.,2.2E-16)); +#67553 = DIRECTION('',(1.,-3.542E-31,-1.61E-15)); +#67554 = ORIENTED_EDGE('',*,*,#66735,.F.); +#67555 = ORIENTED_EDGE('',*,*,#67556,.F.); +#67556 = EDGE_CURVE('',#67557,#66736,#67559,.T.); +#67557 = VERTEX_POINT('',#67558); +#67558 = CARTESIAN_POINT('',(4.032559956043,-2.66,0.34153071713)); +#67559 = CIRCLE('',#67560,0.55); +#67560 = AXIS2_PLACEMENT_3D('',#67561,#67562,#67563); +#67561 = CARTESIAN_POINT('',(4.265,-2.66,0.84)); +#67562 = DIRECTION('',(0.,-1.,2.2E-16)); +#67563 = DIRECTION('',(1.,-3.542E-31,-1.61E-15)); +#67564 = ORIENTED_EDGE('',*,*,#67565,.F.); +#67565 = EDGE_CURVE('',#67547,#67557,#67566,.T.); +#67566 = LINE('',#67567,#67568); +#67567 = CARTESIAN_POINT('',(4.032559956043,-5.435,0.34153071713)); +#67568 = VECTOR('',#67569,1.); +#67569 = DIRECTION('',(5.E-16,-1.,9.7E-16)); +#67570 = CYLINDRICAL_SURFACE('',#67571,0.55); +#67571 = AXIS2_PLACEMENT_3D('',#67572,#67573,#67574); +#67572 = CARTESIAN_POINT('',(4.265,-5.435,0.84)); +#67573 = DIRECTION('',(0.,-1.,2.2E-16)); +#67574 = DIRECTION('',(1.,-3.542E-31,-1.61E-15)); +#67575 = ADVANCED_FACE('',(#67576),#67603,.T.); +#67576 = FACE_BOUND('',#67577,.T.); +#67577 = EDGE_LOOP('',(#67578,#67588,#67595,#67596)); +#67578 = ORIENTED_EDGE('',*,*,#67579,.T.); +#67579 = EDGE_CURVE('',#67580,#67582,#67584,.T.); +#67580 = VERTEX_POINT('',#67581); +#67581 = CARTESIAN_POINT('',(1.917440043957,-2.26,0.34153071713)); +#67582 = VERTEX_POINT('',#67583); +#67583 = CARTESIAN_POINT('',(1.917440043957,-2.66,0.34153071713)); +#67584 = LINE('',#67585,#67586); +#67585 = CARTESIAN_POINT('',(1.917440043957,-5.435,0.34153071713)); +#67586 = VECTOR('',#67587,1.); +#67587 = DIRECTION('',(-7.2E-16,-1.,9.7E-16)); +#67588 = ORIENTED_EDGE('',*,*,#67589,.T.); +#67589 = EDGE_CURVE('',#67582,#66769,#67590,.T.); +#67590 = CIRCLE('',#67591,0.55); +#67591 = AXIS2_PLACEMENT_3D('',#67592,#67593,#67594); +#67592 = CARTESIAN_POINT('',(1.685,-2.66,0.84)); +#67593 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#67594 = DIRECTION('',(-1.,2.2E-16,-1.84E-15)); +#67595 = ORIENTED_EDGE('',*,*,#66777,.T.); +#67596 = ORIENTED_EDGE('',*,*,#67597,.F.); +#67597 = EDGE_CURVE('',#67580,#66778,#67598,.T.); +#67598 = CIRCLE('',#67599,0.55); +#67599 = AXIS2_PLACEMENT_3D('',#67600,#67601,#67602); +#67600 = CARTESIAN_POINT('',(1.685,-2.26,0.84)); +#67601 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#67602 = DIRECTION('',(-1.,2.2E-16,-1.84E-15)); +#67603 = CYLINDRICAL_SURFACE('',#67604,0.55); +#67604 = AXIS2_PLACEMENT_3D('',#67605,#67606,#67607); +#67605 = CARTESIAN_POINT('',(1.685,-5.435,0.84)); +#67606 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#67607 = DIRECTION('',(-1.,2.2E-16,-1.84E-15)); +#67608 = ADVANCED_FACE('',(#67609),#67635,.F.); +#67609 = FACE_BOUND('',#67610,.F.); +#67610 = EDGE_LOOP('',(#67611,#67619,#67628,#67634)); +#67611 = ORIENTED_EDGE('',*,*,#67612,.T.); +#67612 = EDGE_CURVE('',#66736,#67613,#67615,.T.); +#67613 = VERTEX_POINT('',#67614); +#67614 = CARTESIAN_POINT('',(4.265,-2.66,0.59)); +#67615 = LINE('',#67616,#67617); +#67616 = CARTESIAN_POINT('',(4.265,-2.66,-1.E-02)); +#67617 = VECTOR('',#67618,1.); +#67618 = DIRECTION('',(0.,1.1E-16,1.)); +#67619 = ORIENTED_EDGE('',*,*,#67620,.T.); +#67620 = EDGE_CURVE('',#67613,#67621,#67623,.T.); +#67621 = VERTEX_POINT('',#67622); +#67622 = CARTESIAN_POINT('',(4.265,-3.06,0.59)); +#67623 = CIRCLE('',#67624,0.2); +#67624 = AXIS2_PLACEMENT_3D('',#67625,#67626,#67627); +#67625 = CARTESIAN_POINT('',(4.265,-2.86,0.59)); +#67626 = DIRECTION('',(0.,-1.1E-16,-1.)); +#67627 = DIRECTION('',(1.,0.,0.)); +#67628 = ORIENTED_EDGE('',*,*,#67629,.F.); +#67629 = EDGE_CURVE('',#66744,#67621,#67630,.T.); +#67630 = LINE('',#67631,#67632); +#67631 = CARTESIAN_POINT('',(4.265,-3.06,-1.E-02)); +#67632 = VECTOR('',#67633,1.); +#67633 = DIRECTION('',(0.,1.1E-16,1.)); +#67634 = ORIENTED_EDGE('',*,*,#66743,.F.); +#67635 = CYLINDRICAL_SURFACE('',#67636,0.2); +#67636 = AXIS2_PLACEMENT_3D('',#67637,#67638,#67639); +#67637 = CARTESIAN_POINT('',(4.265,-2.86,-1.E-02)); +#67638 = DIRECTION('',(0.,-1.1E-16,-1.)); +#67639 = DIRECTION('',(1.,0.,0.)); +#67640 = ADVANCED_FACE('',(#67641),#67667,.F.); +#67641 = FACE_BOUND('',#67642,.F.); +#67642 = EDGE_LOOP('',(#67643,#67644,#67652,#67661)); +#67643 = ORIENTED_EDGE('',*,*,#66768,.F.); +#67644 = ORIENTED_EDGE('',*,*,#67645,.T.); +#67645 = EDGE_CURVE('',#66761,#67646,#67648,.T.); +#67646 = VERTEX_POINT('',#67647); +#67647 = CARTESIAN_POINT('',(1.685,-3.06,0.59)); +#67648 = LINE('',#67649,#67650); +#67649 = CARTESIAN_POINT('',(1.685,-3.06,-1.E-02)); +#67650 = VECTOR('',#67651,1.); +#67651 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#67652 = ORIENTED_EDGE('',*,*,#67653,.T.); +#67653 = EDGE_CURVE('',#67646,#67654,#67656,.T.); +#67654 = VERTEX_POINT('',#67655); +#67655 = CARTESIAN_POINT('',(1.685,-2.66,0.59)); +#67656 = CIRCLE('',#67657,0.2); +#67657 = AXIS2_PLACEMENT_3D('',#67658,#67659,#67660); +#67658 = CARTESIAN_POINT('',(1.685,-2.86,0.59)); +#67659 = DIRECTION('',(2.2E-16,1.741711239665E-48,-1.)); +#67660 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67661 = ORIENTED_EDGE('',*,*,#67662,.F.); +#67662 = EDGE_CURVE('',#66769,#67654,#67663,.T.); +#67663 = LINE('',#67664,#67665); +#67664 = CARTESIAN_POINT('',(1.685,-2.66,-1.E-02)); +#67665 = VECTOR('',#67666,1.); +#67666 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#67667 = CYLINDRICAL_SURFACE('',#67668,0.2); +#67668 = AXIS2_PLACEMENT_3D('',#67669,#67670,#67671); +#67669 = CARTESIAN_POINT('',(1.685,-2.86,-1.E-02)); +#67670 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#67671 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67672 = ADVANCED_FACE('',(#67673),#67691,.F.); +#67673 = FACE_BOUND('',#67674,.F.); +#67674 = EDGE_LOOP('',(#67675,#67676,#67677,#67685)); +#67675 = ORIENTED_EDGE('',*,*,#66752,.T.); +#67676 = ORIENTED_EDGE('',*,*,#67629,.T.); +#67677 = ORIENTED_EDGE('',*,*,#67678,.F.); +#67678 = EDGE_CURVE('',#67679,#67621,#67681,.T.); +#67679 = VERTEX_POINT('',#67680); +#67680 = CARTESIAN_POINT('',(2.975,-3.06,0.59)); +#67681 = LINE('',#67682,#67683); +#67682 = CARTESIAN_POINT('',(5.205,-3.06,0.59)); +#67683 = VECTOR('',#67684,1.); +#67684 = DIRECTION('',(1.,0.,0.)); +#67685 = ORIENTED_EDGE('',*,*,#67686,.F.); +#67686 = EDGE_CURVE('',#66753,#67679,#67687,.T.); +#67687 = LINE('',#67688,#67689); +#67688 = CARTESIAN_POINT('',(2.975,-3.06,-1.E-02)); +#67689 = VECTOR('',#67690,1.); +#67690 = DIRECTION('',(0.,1.1E-16,1.)); +#67691 = PLANE('',#67692); +#67692 = AXIS2_PLACEMENT_3D('',#67693,#67694,#67695); +#67693 = CARTESIAN_POINT('',(4.265,-3.06,-1.E-02)); +#67694 = DIRECTION('',(0.,-1.,1.1E-16)); +#67695 = DIRECTION('',(-1.,0.,0.)); +#67696 = ADVANCED_FACE('',(#67697),#67708,.F.); +#67697 = FACE_BOUND('',#67698,.T.); +#67698 = EDGE_LOOP('',(#67699,#67700,#67701,#67707)); +#67699 = ORIENTED_EDGE('',*,*,#66760,.T.); +#67700 = ORIENTED_EDGE('',*,*,#67645,.T.); +#67701 = ORIENTED_EDGE('',*,*,#67702,.F.); +#67702 = EDGE_CURVE('',#67679,#67646,#67703,.T.); +#67703 = LINE('',#67704,#67705); +#67704 = CARTESIAN_POINT('',(3.915,-3.06,0.59)); +#67705 = VECTOR('',#67706,1.); +#67706 = DIRECTION('',(-1.,2.2E-16,0.)); +#67707 = ORIENTED_EDGE('',*,*,#67686,.F.); +#67708 = PLANE('',#67709); +#67709 = AXIS2_PLACEMENT_3D('',#67710,#67711,#67712); +#67710 = CARTESIAN_POINT('',(1.685,-3.06,-1.E-02)); +#67711 = DIRECTION('',(-2.2E-16,-1.,1.1E-16)); +#67712 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#67713 = ADVANCED_FACE('',(#67714),#67734,.F.); +#67714 = FACE_BOUND('',#67715,.F.); +#67715 = EDGE_LOOP('',(#67716,#67725,#67732,#67733)); +#67716 = ORIENTED_EDGE('',*,*,#67717,.T.); +#67717 = EDGE_CURVE('',#67718,#67718,#67720,.T.); +#67718 = VERTEX_POINT('',#67719); +#67719 = CARTESIAN_POINT('',(0.435,-2.85,0.19)); +#67720 = CIRCLE('',#67721,0.35); +#67721 = AXIS2_PLACEMENT_3D('',#67722,#67723,#67724); +#67722 = CARTESIAN_POINT('',(0.785,-2.85,0.19)); +#67723 = DIRECTION('',(2.2E-16,-8.9E-16,-1.)); +#67724 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#67725 = ORIENTED_EDGE('',*,*,#67726,.F.); +#67726 = EDGE_CURVE('',#66842,#67718,#67727,.T.); +#67727 = CIRCLE('',#67728,0.1); +#67728 = AXIS2_PLACEMENT_3D('',#67729,#67730,#67731); +#67729 = CARTESIAN_POINT('',(0.335,-2.85,0.19)); +#67730 = DIRECTION('',(3.E-17,1.,-8.9E-16)); +#67731 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#67732 = ORIENTED_EDGE('',*,*,#66841,.F.); +#67733 = ORIENTED_EDGE('',*,*,#67726,.T.); +#67734 = TOROIDAL_SURFACE('',#67735,0.45,0.1); +#67735 = AXIS2_PLACEMENT_3D('',#67736,#67737,#67738); +#67736 = CARTESIAN_POINT('',(0.785,-2.85,0.19)); +#67737 = DIRECTION('',(-2.2E-16,8.9E-16,1.)); +#67738 = DIRECTION('',(-1.,3.E-17,-2.2E-16)); +#67739 = ADVANCED_FACE('',(#67740),#67760,.F.); +#67740 = FACE_BOUND('',#67741,.F.); +#67741 = EDGE_LOOP('',(#67742,#67751,#67752,#67753)); +#67742 = ORIENTED_EDGE('',*,*,#67743,.F.); +#67743 = EDGE_CURVE('',#66853,#67744,#67746,.T.); +#67744 = VERTEX_POINT('',#67745); +#67745 = CARTESIAN_POINT('',(5.515,-2.85,0.19)); +#67746 = CIRCLE('',#67747,0.1); +#67747 = AXIS2_PLACEMENT_3D('',#67748,#67749,#67750); +#67748 = CARTESIAN_POINT('',(5.615,-2.85,0.19)); +#67749 = DIRECTION('',(-1.9E-16,-1.,8.9E-16)); +#67750 = DIRECTION('',(1.,-1.9E-16,-1.8901417092E-48)); +#67751 = ORIENTED_EDGE('',*,*,#66852,.T.); +#67752 = ORIENTED_EDGE('',*,*,#67743,.T.); +#67753 = ORIENTED_EDGE('',*,*,#67754,.F.); +#67754 = EDGE_CURVE('',#67744,#67744,#67755,.T.); +#67755 = CIRCLE('',#67756,0.35); +#67756 = AXIS2_PLACEMENT_3D('',#67757,#67758,#67759); +#67757 = CARTESIAN_POINT('',(5.165,-2.85,0.19)); +#67758 = DIRECTION('',(-1.8901417092E-48,8.9E-16,1.)); +#67759 = DIRECTION('',(1.,-1.9E-16,1.691E-31)); +#67760 = TOROIDAL_SURFACE('',#67761,0.45,0.1); +#67761 = AXIS2_PLACEMENT_3D('',#67762,#67763,#67764); +#67762 = CARTESIAN_POINT('',(5.165,-2.85,0.19)); +#67763 = DIRECTION('',(0.,8.9E-16,1.)); +#67764 = DIRECTION('',(1.,-1.9E-16,1.691E-31)); +#67765 = ADVANCED_FACE('',(#67766),#67792,.T.); +#67766 = FACE_BOUND('',#67767,.T.); +#67767 = EDGE_LOOP('',(#67768,#67776,#67785,#67791)); +#67768 = ORIENTED_EDGE('',*,*,#67769,.T.); +#67769 = EDGE_CURVE('',#66870,#67770,#67772,.T.); +#67770 = VERTEX_POINT('',#67771); +#67771 = CARTESIAN_POINT('',(-0.195,0.53,3.45)); +#67772 = LINE('',#67773,#67774); +#67773 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#67774 = VECTOR('',#67775,1.); +#67775 = DIRECTION('',(0.,1.,-2.2E-16)); +#67776 = ORIENTED_EDGE('',*,*,#67777,.T.); +#67777 = EDGE_CURVE('',#67770,#67778,#67780,.T.); +#67778 = VERTEX_POINT('',#67779); +#67779 = CARTESIAN_POINT('',(-1.495,0.53,2.15)); +#67780 = CIRCLE('',#67781,1.3); +#67781 = AXIS2_PLACEMENT_3D('',#67782,#67783,#67784); +#67782 = CARTESIAN_POINT('',(-0.195,0.53,2.15)); +#67783 = DIRECTION('',(0.,-1.,2.2E-16)); +#67784 = DIRECTION('',(1.,0.,0.)); +#67785 = ORIENTED_EDGE('',*,*,#67786,.F.); +#67786 = EDGE_CURVE('',#66872,#67778,#67787,.T.); +#67787 = LINE('',#67788,#67789); +#67788 = CARTESIAN_POINT('',(-1.495,-8.61,2.15)); +#67789 = VECTOR('',#67790,1.); +#67790 = DIRECTION('',(0.,1.,-2.2E-16)); +#67791 = ORIENTED_EDGE('',*,*,#66869,.F.); +#67792 = CYLINDRICAL_SURFACE('',#67793,1.3); +#67793 = AXIS2_PLACEMENT_3D('',#67794,#67795,#67796); +#67794 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#67795 = DIRECTION('',(0.,-1.,2.2E-16)); +#67796 = DIRECTION('',(1.,0.,0.)); +#67797 = ADVANCED_FACE('',(#67798),#67867,.F.); +#67798 = FACE_BOUND('',#67799,.F.); +#67799 = EDGE_LOOP('',(#67800,#67801,#67802,#67803,#67811,#67819,#67825, + #67826,#67827,#67828,#67836,#67844,#67852,#67860,#67866)); +#67800 = ORIENTED_EDGE('',*,*,#66880,.F.); +#67801 = ORIENTED_EDGE('',*,*,#67032,.T.); +#67802 = ORIENTED_EDGE('',*,*,#67123,.T.); +#67803 = ORIENTED_EDGE('',*,*,#67804,.T.); +#67804 = EDGE_CURVE('',#67124,#67805,#67807,.T.); +#67805 = VERTEX_POINT('',#67806); +#67806 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#67807 = LINE('',#67808,#67809); +#67808 = CARTESIAN_POINT('',(-1.495,-7.385,1.615)); +#67809 = VECTOR('',#67810,1.); +#67810 = DIRECTION('',(0.,1.,-2.2E-16)); +#67811 = ORIENTED_EDGE('',*,*,#67812,.T.); +#67812 = EDGE_CURVE('',#67805,#67813,#67815,.T.); +#67813 = VERTEX_POINT('',#67814); +#67814 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#67815 = LINE('',#67816,#67817); +#67816 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#67817 = VECTOR('',#67818,1.); +#67818 = DIRECTION('',(5.E-16,1.,-2.2E-16)); +#67819 = ORIENTED_EDGE('',*,*,#67820,.T.); +#67820 = EDGE_CURVE('',#67813,#67287,#67821,.T.); +#67821 = LINE('',#67822,#67823); +#67822 = CARTESIAN_POINT('',(-1.495,-7.385,1.615)); +#67823 = VECTOR('',#67824,1.); +#67824 = DIRECTION('',(0.,1.,-2.2E-16)); +#67825 = ORIENTED_EDGE('',*,*,#67294,.T.); +#67826 = ORIENTED_EDGE('',*,*,#67360,.T.); +#67827 = ORIENTED_EDGE('',*,*,#67451,.T.); +#67828 = ORIENTED_EDGE('',*,*,#67829,.T.); +#67829 = EDGE_CURVE('',#67452,#67830,#67832,.T.); +#67830 = VERTEX_POINT('',#67831); +#67831 = CARTESIAN_POINT('',(-1.495,-1.73,1.615)); +#67832 = LINE('',#67833,#67834); +#67833 = CARTESIAN_POINT('',(-1.495,-5.435,1.615)); +#67834 = VECTOR('',#67835,1.); +#67835 = DIRECTION('',(0.,1.,-2.2E-16)); +#67836 = ORIENTED_EDGE('',*,*,#67837,.T.); +#67837 = EDGE_CURVE('',#67830,#67838,#67840,.T.); +#67838 = VERTEX_POINT('',#67839); +#67839 = CARTESIAN_POINT('',(-1.495,-0.63,1.615)); +#67840 = LINE('',#67841,#67842); +#67841 = CARTESIAN_POINT('',(-1.495,-5.435,1.615)); +#67842 = VECTOR('',#67843,1.); +#67843 = DIRECTION('',(0.,1.,-2.2E-16)); +#67844 = ORIENTED_EDGE('',*,*,#67845,.T.); +#67845 = EDGE_CURVE('',#67838,#67846,#67848,.T.); +#67846 = VERTEX_POINT('',#67847); +#67847 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#67848 = LINE('',#67849,#67850); +#67849 = CARTESIAN_POINT('',(-1.495,-0.63,1.6025)); +#67850 = VECTOR('',#67851,1.); +#67851 = DIRECTION('',(0.,2.2E-16,1.)); +#67852 = ORIENTED_EDGE('',*,*,#67853,.T.); +#67853 = EDGE_CURVE('',#67846,#67854,#67856,.T.); +#67854 = VERTEX_POINT('',#67855); +#67855 = CARTESIAN_POINT('',(-1.495,0.53,1.87)); +#67856 = LINE('',#67857,#67858); +#67857 = CARTESIAN_POINT('',(-1.495,-4.62,1.87)); +#67858 = VECTOR('',#67859,1.); +#67859 = DIRECTION('',(0.,1.,-2.2E-16)); +#67860 = ORIENTED_EDGE('',*,*,#67861,.T.); +#67861 = EDGE_CURVE('',#67854,#67778,#67862,.T.); +#67862 = LINE('',#67863,#67864); +#67863 = CARTESIAN_POINT('',(-1.495,0.53,1.59)); +#67864 = VECTOR('',#67865,1.); +#67865 = DIRECTION('',(0.,2.2E-16,1.)); +#67866 = ORIENTED_EDGE('',*,*,#67786,.F.); +#67867 = PLANE('',#67868); +#67868 = AXIS2_PLACEMENT_3D('',#67869,#67870,#67871); +#67869 = CARTESIAN_POINT('',(-1.495,-8.61,1.59)); +#67870 = DIRECTION('',(1.,0.,0.)); +#67871 = DIRECTION('',(-0.,2.2E-16,1.)); +#67872 = ADVANCED_FACE('',(#67873),#67949,.F.); +#67873 = FACE_BOUND('',#67874,.F.); +#67874 = EDGE_LOOP('',(#67875,#67876,#67884,#67892,#67900,#67908,#67916, + #67922,#67923,#67924,#67925,#67933,#67941,#67947,#67948)); +#67875 = ORIENTED_EDGE('',*,*,#66905,.F.); +#67876 = ORIENTED_EDGE('',*,*,#67877,.T.); +#67877 = EDGE_CURVE('',#66906,#67878,#67880,.T.); +#67878 = VERTEX_POINT('',#67879); +#67879 = CARTESIAN_POINT('',(7.445,0.53,2.15)); +#67880 = LINE('',#67881,#67882); +#67881 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#67882 = VECTOR('',#67883,1.); +#67883 = DIRECTION('',(0.,1.,-2.2E-16)); +#67884 = ORIENTED_EDGE('',*,*,#67885,.T.); +#67885 = EDGE_CURVE('',#67878,#67886,#67888,.T.); +#67886 = VERTEX_POINT('',#67887); +#67887 = CARTESIAN_POINT('',(7.445,0.53,1.87)); +#67888 = LINE('',#67889,#67890); +#67889 = CARTESIAN_POINT('',(7.445,0.53,2.15)); +#67890 = VECTOR('',#67891,1.); +#67891 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67892 = ORIENTED_EDGE('',*,*,#67893,.F.); +#67893 = EDGE_CURVE('',#67894,#67886,#67896,.T.); +#67894 = VERTEX_POINT('',#67895); +#67895 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#67896 = LINE('',#67897,#67898); +#67897 = CARTESIAN_POINT('',(7.445,-4.62,1.87)); +#67898 = VECTOR('',#67899,1.); +#67899 = DIRECTION('',(0.,1.,-3.3E-16)); +#67900 = ORIENTED_EDGE('',*,*,#67901,.F.); +#67901 = EDGE_CURVE('',#67902,#67894,#67904,.T.); +#67902 = VERTEX_POINT('',#67903); +#67903 = CARTESIAN_POINT('',(7.445,-0.63,1.615)); +#67904 = LINE('',#67905,#67906); +#67905 = CARTESIAN_POINT('',(7.445,-0.63,1.8825)); +#67906 = VECTOR('',#67907,1.); +#67907 = DIRECTION('',(0.,3.3E-16,1.)); +#67908 = ORIENTED_EDGE('',*,*,#67909,.F.); +#67909 = EDGE_CURVE('',#67910,#67902,#67912,.T.); +#67910 = VERTEX_POINT('',#67911); +#67911 = CARTESIAN_POINT('',(7.445,-1.73,1.615)); +#67912 = LINE('',#67913,#67914); +#67913 = CARTESIAN_POINT('',(7.445,-5.435,1.615)); +#67914 = VECTOR('',#67915,1.); +#67915 = DIRECTION('',(0.,1.,-3.3E-16)); +#67916 = ORIENTED_EDGE('',*,*,#67917,.F.); +#67917 = EDGE_CURVE('',#67395,#67910,#67918,.T.); +#67918 = LINE('',#67919,#67920); +#67919 = CARTESIAN_POINT('',(7.445,-5.435,1.615)); +#67920 = VECTOR('',#67921,1.); +#67921 = DIRECTION('',(0.,1.,-3.3E-16)); +#67922 = ORIENTED_EDGE('',*,*,#67394,.F.); +#67923 = ORIENTED_EDGE('',*,*,#67345,.F.); +#67924 = ORIENTED_EDGE('',*,*,#67236,.F.); +#67925 = ORIENTED_EDGE('',*,*,#67926,.F.); +#67926 = EDGE_CURVE('',#67927,#67229,#67929,.T.); +#67927 = VERTEX_POINT('',#67928); +#67928 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#67929 = LINE('',#67930,#67931); +#67930 = CARTESIAN_POINT('',(7.445,-7.385,1.615)); +#67931 = VECTOR('',#67932,1.); +#67932 = DIRECTION('',(0.,1.,-3.3E-16)); +#67933 = ORIENTED_EDGE('',*,*,#67934,.F.); +#67934 = EDGE_CURVE('',#67935,#67927,#67937,.T.); +#67935 = VERTEX_POINT('',#67936); +#67936 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#67937 = LINE('',#67938,#67939); +#67938 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#67939 = VECTOR('',#67940,1.); +#67940 = DIRECTION('',(2.8E-16,1.,-2.2E-16)); +#67941 = ORIENTED_EDGE('',*,*,#67942,.F.); +#67942 = EDGE_CURVE('',#67067,#67935,#67943,.T.); +#67943 = LINE('',#67944,#67945); +#67944 = CARTESIAN_POINT('',(7.445,-7.385,1.615)); +#67945 = VECTOR('',#67946,1.); +#67946 = DIRECTION('',(0.,1.,-3.3E-16)); +#67947 = ORIENTED_EDGE('',*,*,#67066,.F.); +#67948 = ORIENTED_EDGE('',*,*,#67017,.F.); +#67949 = PLANE('',#67950); +#67950 = AXIS2_PLACEMENT_3D('',#67951,#67952,#67953); +#67951 = CARTESIAN_POINT('',(7.445,-8.61,2.15)); +#67952 = DIRECTION('',(-1.,0.,0.)); +#67953 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#67954 = ADVANCED_FACE('',(#67955),#67974,.T.); +#67955 = FACE_BOUND('',#67956,.T.); +#67956 = EDGE_LOOP('',(#67957,#67958,#67967,#67973)); +#67957 = ORIENTED_EDGE('',*,*,#67877,.T.); +#67958 = ORIENTED_EDGE('',*,*,#67959,.T.); +#67959 = EDGE_CURVE('',#67878,#67960,#67962,.T.); +#67960 = VERTEX_POINT('',#67961); +#67961 = CARTESIAN_POINT('',(6.145,0.53,3.45)); +#67962 = CIRCLE('',#67963,1.3); +#67963 = AXIS2_PLACEMENT_3D('',#67964,#67965,#67966); +#67964 = CARTESIAN_POINT('',(6.145,0.53,2.15)); +#67965 = DIRECTION('',(0.,-1.,2.2E-16)); +#67966 = DIRECTION('',(1.,0.,0.)); +#67967 = ORIENTED_EDGE('',*,*,#67968,.F.); +#67968 = EDGE_CURVE('',#66914,#67960,#67969,.T.); +#67969 = LINE('',#67970,#67971); +#67970 = CARTESIAN_POINT('',(6.145,-8.61,3.45)); +#67971 = VECTOR('',#67972,1.); +#67972 = DIRECTION('',(0.,1.,-2.2E-16)); +#67973 = ORIENTED_EDGE('',*,*,#66913,.F.); +#67974 = CYLINDRICAL_SURFACE('',#67975,1.3); +#67975 = AXIS2_PLACEMENT_3D('',#67976,#67977,#67978); +#67976 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#67977 = DIRECTION('',(0.,-1.,2.2E-16)); +#67978 = DIRECTION('',(1.,0.,0.)); +#67979 = ADVANCED_FACE('',(#67980),#67991,.F.); +#67980 = FACE_BOUND('',#67981,.F.); +#67981 = EDGE_LOOP('',(#67982,#67983,#67989,#67990)); +#67982 = ORIENTED_EDGE('',*,*,#67769,.T.); +#67983 = ORIENTED_EDGE('',*,*,#67984,.T.); +#67984 = EDGE_CURVE('',#67770,#67960,#67985,.T.); +#67985 = LINE('',#67986,#67987); +#67986 = CARTESIAN_POINT('',(-0.195,0.53,3.45)); +#67987 = VECTOR('',#67988,1.); +#67988 = DIRECTION('',(1.,0.,0.)); +#67989 = ORIENTED_EDGE('',*,*,#67968,.F.); +#67990 = ORIENTED_EDGE('',*,*,#66922,.F.); +#67991 = PLANE('',#67992); +#67992 = AXIS2_PLACEMENT_3D('',#67993,#67994,#67995); +#67993 = CARTESIAN_POINT('',(-0.195,-8.61,3.45)); +#67994 = DIRECTION('',(0.,-2.2E-16,-1.)); +#67995 = DIRECTION('',(1.,0.,0.)); +#67996 = ADVANCED_FACE('',(#67997),#68023,.F.); +#67997 = FACE_BOUND('',#67998,.F.); +#67998 = EDGE_LOOP('',(#67999,#68007,#68016,#68022)); +#67999 = ORIENTED_EDGE('',*,*,#68000,.T.); +#68000 = EDGE_CURVE('',#66931,#68001,#68003,.T.); +#68001 = VERTEX_POINT('',#68002); +#68002 = CARTESIAN_POINT('',(-0.195,0.53,3.15)); +#68003 = LINE('',#68004,#68005); +#68004 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#68005 = VECTOR('',#68006,1.); +#68006 = DIRECTION('',(0.,1.,-2.2E-16)); +#68007 = ORIENTED_EDGE('',*,*,#68008,.T.); +#68008 = EDGE_CURVE('',#68001,#68009,#68011,.T.); +#68009 = VERTEX_POINT('',#68010); +#68010 = CARTESIAN_POINT('',(-1.195,0.53,2.15)); +#68011 = CIRCLE('',#68012,1.); +#68012 = AXIS2_PLACEMENT_3D('',#68013,#68014,#68015); +#68013 = CARTESIAN_POINT('',(-0.195,0.53,2.15)); +#68014 = DIRECTION('',(0.,-1.,2.2E-16)); +#68015 = DIRECTION('',(1.,0.,0.)); +#68016 = ORIENTED_EDGE('',*,*,#68017,.F.); +#68017 = EDGE_CURVE('',#66933,#68009,#68018,.T.); +#68018 = LINE('',#68019,#68020); +#68019 = CARTESIAN_POINT('',(-1.195,-8.61,2.15)); +#68020 = VECTOR('',#68021,1.); +#68021 = DIRECTION('',(0.,1.,-2.2E-16)); +#68022 = ORIENTED_EDGE('',*,*,#66930,.F.); +#68023 = CYLINDRICAL_SURFACE('',#68024,1.); +#68024 = AXIS2_PLACEMENT_3D('',#68025,#68026,#68027); +#68025 = CARTESIAN_POINT('',(-0.195,-8.61,2.15)); +#68026 = DIRECTION('',(0.,-1.,2.2E-16)); +#68027 = DIRECTION('',(1.,0.,0.)); +#68028 = ADVANCED_FACE('',(#68029),#68108,.T.); +#68029 = FACE_BOUND('',#68030,.T.); +#68030 = EDGE_LOOP('',(#68031,#68032,#68038,#68039,#68047,#68055,#68061, + #68062,#68068,#68069,#68077,#68085,#68093,#68101,#68107)); +#68031 = ORIENTED_EDGE('',*,*,#66941,.F.); +#68032 = ORIENTED_EDGE('',*,*,#68033,.T.); +#68033 = EDGE_CURVE('',#66942,#67140,#68034,.T.); +#68034 = LINE('',#68035,#68036); +#68035 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#68036 = VECTOR('',#68037,1.); +#68037 = DIRECTION('',(0.,1.,-2.2E-16)); +#68038 = ORIENTED_EDGE('',*,*,#67139,.T.); +#68039 = ORIENTED_EDGE('',*,*,#68040,.T.); +#68040 = EDGE_CURVE('',#67132,#68041,#68043,.T.); +#68041 = VERTEX_POINT('',#68042); +#68042 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#68043 = LINE('',#68044,#68045); +#68044 = CARTESIAN_POINT('',(-1.195,-7.385,1.615)); +#68045 = VECTOR('',#68046,1.); +#68046 = DIRECTION('',(0.,1.,-2.2E-16)); +#68047 = ORIENTED_EDGE('',*,*,#68048,.F.); +#68048 = EDGE_CURVE('',#68049,#68041,#68051,.T.); +#68049 = VERTEX_POINT('',#68050); +#68050 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#68051 = LINE('',#68052,#68053); +#68052 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#68053 = VECTOR('',#68054,1.); +#68054 = DIRECTION('',(-5.E-16,-1.,2.2E-16)); +#68055 = ORIENTED_EDGE('',*,*,#68056,.T.); +#68056 = EDGE_CURVE('',#68049,#67277,#68057,.T.); +#68057 = LINE('',#68058,#68059); +#68058 = CARTESIAN_POINT('',(-1.195,-7.385,1.615)); +#68059 = VECTOR('',#68060,1.); +#68060 = DIRECTION('',(0.,1.,-2.2E-16)); +#68061 = ORIENTED_EDGE('',*,*,#67276,.T.); +#68062 = ORIENTED_EDGE('',*,*,#68063,.T.); +#68063 = EDGE_CURVE('',#67279,#67468,#68064,.T.); +#68064 = LINE('',#68065,#68066); +#68065 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#68066 = VECTOR('',#68067,1.); +#68067 = DIRECTION('',(0.,1.,-2.2E-16)); +#68068 = ORIENTED_EDGE('',*,*,#67467,.T.); +#68069 = ORIENTED_EDGE('',*,*,#68070,.T.); +#68070 = EDGE_CURVE('',#67460,#68071,#68073,.T.); +#68071 = VERTEX_POINT('',#68072); +#68072 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#68073 = LINE('',#68074,#68075); +#68074 = CARTESIAN_POINT('',(-1.195,-5.435,1.615)); +#68075 = VECTOR('',#68076,1.); +#68076 = DIRECTION('',(0.,1.,-2.2E-16)); +#68077 = ORIENTED_EDGE('',*,*,#68078,.T.); +#68078 = EDGE_CURVE('',#68071,#68079,#68081,.T.); +#68079 = VERTEX_POINT('',#68080); +#68080 = CARTESIAN_POINT('',(-1.195,-0.63,1.615)); +#68081 = LINE('',#68082,#68083); +#68082 = CARTESIAN_POINT('',(-1.195,-5.435,1.615)); +#68083 = VECTOR('',#68084,1.); +#68084 = DIRECTION('',(0.,1.,-2.2E-16)); +#68085 = ORIENTED_EDGE('',*,*,#68086,.T.); +#68086 = EDGE_CURVE('',#68079,#68087,#68089,.T.); +#68087 = VERTEX_POINT('',#68088); +#68088 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#68089 = LINE('',#68090,#68091); +#68090 = CARTESIAN_POINT('',(-1.195,-0.63,1.6025)); +#68091 = VECTOR('',#68092,1.); +#68092 = DIRECTION('',(0.,2.2E-16,1.)); +#68093 = ORIENTED_EDGE('',*,*,#68094,.T.); +#68094 = EDGE_CURVE('',#68087,#68095,#68097,.T.); +#68095 = VERTEX_POINT('',#68096); +#68096 = CARTESIAN_POINT('',(-1.195,0.53,1.87)); +#68097 = LINE('',#68098,#68099); +#68098 = CARTESIAN_POINT('',(-1.195,-4.62,1.87)); +#68099 = VECTOR('',#68100,1.); +#68100 = DIRECTION('',(0.,1.,-2.2E-16)); +#68101 = ORIENTED_EDGE('',*,*,#68102,.T.); +#68102 = EDGE_CURVE('',#68095,#68009,#68103,.T.); +#68103 = LINE('',#68104,#68105); +#68104 = CARTESIAN_POINT('',(-1.195,0.53,1.59)); +#68105 = VECTOR('',#68106,1.); +#68106 = DIRECTION('',(0.,2.2E-16,1.)); +#68107 = ORIENTED_EDGE('',*,*,#68017,.F.); +#68108 = PLANE('',#68109); +#68109 = AXIS2_PLACEMENT_3D('',#68110,#68111,#68112); +#68110 = CARTESIAN_POINT('',(-1.195,-8.61,1.59)); +#68111 = DIRECTION('',(1.,0.,0.)); +#68112 = DIRECTION('',(-0.,2.2E-16,1.)); +#68113 = ADVANCED_FACE('',(#68114),#68125,.F.); +#68114 = FACE_BOUND('',#68115,.F.); +#68115 = EDGE_LOOP('',(#68116,#68117,#68118,#68119)); +#68116 = ORIENTED_EDGE('',*,*,#66949,.F.); +#68117 = ORIENTED_EDGE('',*,*,#68033,.T.); +#68118 = ORIENTED_EDGE('',*,*,#67147,.T.); +#68119 = ORIENTED_EDGE('',*,*,#68120,.F.); +#68120 = EDGE_CURVE('',#66950,#67148,#68121,.T.); +#68121 = LINE('',#68122,#68123); +#68122 = CARTESIAN_POINT('',(-0.195,-8.61,0.59)); +#68123 = VECTOR('',#68124,1.); +#68124 = DIRECTION('',(0.,1.,-2.2E-16)); +#68125 = CYLINDRICAL_SURFACE('',#68126,1.); +#68126 = AXIS2_PLACEMENT_3D('',#68127,#68128,#68129); +#68127 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#68128 = DIRECTION('',(0.,-1.,2.2E-16)); +#68129 = DIRECTION('',(1.,0.,0.)); +#68130 = ADVANCED_FACE('',(#68131),#68179,.T.); +#68131 = FACE_BOUND('',#68132,.T.); +#68132 = EDGE_LOOP('',(#68133,#68134,#68140,#68141,#68142,#68143,#68149, + #68150,#68151,#68157,#68158,#68159,#68160,#68161,#68167,#68168, + #68169,#68175,#68176,#68177,#68178)); +#68133 = ORIENTED_EDGE('',*,*,#66958,.F.); +#68134 = ORIENTED_EDGE('',*,*,#68135,.T.); +#68135 = EDGE_CURVE('',#66959,#67091,#68136,.T.); +#68136 = LINE('',#68137,#68138); +#68137 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#68138 = VECTOR('',#68139,1.); +#68139 = DIRECTION('',(0.,1.,-2.2E-16)); +#68140 = ORIENTED_EDGE('',*,*,#67099,.F.); +#68141 = ORIENTED_EDGE('',*,*,#67170,.T.); +#68142 = ORIENTED_EDGE('',*,*,#67253,.F.); +#68143 = ORIENTED_EDGE('',*,*,#68144,.T.); +#68144 = EDGE_CURVE('',#67254,#67419,#68145,.T.); +#68145 = LINE('',#68146,#68147); +#68146 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#68147 = VECTOR('',#68148,1.); +#68148 = DIRECTION('',(0.,1.,-2.2E-16)); +#68149 = ORIENTED_EDGE('',*,*,#67427,.F.); +#68150 = ORIENTED_EDGE('',*,*,#67500,.F.); +#68151 = ORIENTED_EDGE('',*,*,#68152,.F.); +#68152 = EDGE_CURVE('',#67613,#67501,#68153,.T.); +#68153 = LINE('',#68154,#68155); +#68154 = CARTESIAN_POINT('',(4.265,-5.435,0.59)); +#68155 = VECTOR('',#68156,1.); +#68156 = DIRECTION('',(0.,1.,-6.7E-16)); +#68157 = ORIENTED_EDGE('',*,*,#67620,.T.); +#68158 = ORIENTED_EDGE('',*,*,#67678,.F.); +#68159 = ORIENTED_EDGE('',*,*,#67702,.T.); +#68160 = ORIENTED_EDGE('',*,*,#67653,.T.); +#68161 = ORIENTED_EDGE('',*,*,#68162,.T.); +#68162 = EDGE_CURVE('',#67654,#67525,#68163,.T.); +#68163 = LINE('',#68164,#68165); +#68164 = CARTESIAN_POINT('',(1.685,-5.435,0.59)); +#68165 = VECTOR('',#68166,1.); +#68166 = DIRECTION('',(2.2E-16,1.,-7.8E-16)); +#68167 = ORIENTED_EDGE('',*,*,#67524,.T.); +#68168 = ORIENTED_EDGE('',*,*,#67484,.T.); +#68169 = ORIENTED_EDGE('',*,*,#68170,.F.); +#68170 = EDGE_CURVE('',#67312,#67476,#68171,.T.); +#68171 = LINE('',#68172,#68173); +#68172 = CARTESIAN_POINT('',(-0.195,-8.61,0.59)); +#68173 = VECTOR('',#68174,1.); +#68174 = DIRECTION('',(0.,1.,-2.2E-16)); +#68175 = ORIENTED_EDGE('',*,*,#67311,.T.); +#68176 = ORIENTED_EDGE('',*,*,#67194,.F.); +#68177 = ORIENTED_EDGE('',*,*,#67156,.T.); +#68178 = ORIENTED_EDGE('',*,*,#68120,.F.); +#68179 = PLANE('',#68180); +#68180 = AXIS2_PLACEMENT_3D('',#68181,#68182,#68183); +#68181 = CARTESIAN_POINT('',(6.145,-8.61,0.59)); +#68182 = DIRECTION('',(0.,2.2E-16,1.)); +#68183 = DIRECTION('',(-1.,0.,0.)); +#68184 = ADVANCED_FACE('',(#68185),#68196,.F.); +#68185 = FACE_BOUND('',#68186,.F.); +#68186 = EDGE_LOOP('',(#68187,#68188,#68189,#68190)); +#68187 = ORIENTED_EDGE('',*,*,#66966,.F.); +#68188 = ORIENTED_EDGE('',*,*,#68135,.T.); +#68189 = ORIENTED_EDGE('',*,*,#67090,.T.); +#68190 = ORIENTED_EDGE('',*,*,#68191,.F.); +#68191 = EDGE_CURVE('',#66967,#67083,#68192,.T.); +#68192 = LINE('',#68193,#68194); +#68193 = CARTESIAN_POINT('',(7.145,-8.61,1.59)); +#68194 = VECTOR('',#68195,1.); +#68195 = DIRECTION('',(0.,1.,-2.2E-16)); +#68196 = CYLINDRICAL_SURFACE('',#68197,1.); +#68197 = AXIS2_PLACEMENT_3D('',#68198,#68199,#68200); +#68198 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#68199 = DIRECTION('',(0.,-1.,2.2E-16)); +#68200 = DIRECTION('',(1.,0.,0.)); +#68201 = ADVANCED_FACE('',(#68202),#68283,.T.); +#68202 = FACE_BOUND('',#68203,.T.); +#68203 = EDGE_LOOP('',(#68204,#68205,#68213,#68221,#68229,#68237,#68245, + #68251,#68252,#68258,#68259,#68267,#68275,#68281,#68282)); +#68204 = ORIENTED_EDGE('',*,*,#66975,.F.); +#68205 = ORIENTED_EDGE('',*,*,#68206,.T.); +#68206 = EDGE_CURVE('',#66976,#68207,#68209,.T.); +#68207 = VERTEX_POINT('',#68208); +#68208 = CARTESIAN_POINT('',(7.145,0.53,2.15)); +#68209 = LINE('',#68210,#68211); +#68210 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#68211 = VECTOR('',#68212,1.); +#68212 = DIRECTION('',(0.,1.,-2.2E-16)); +#68213 = ORIENTED_EDGE('',*,*,#68214,.T.); +#68214 = EDGE_CURVE('',#68207,#68215,#68217,.T.); +#68215 = VERTEX_POINT('',#68216); +#68216 = CARTESIAN_POINT('',(7.145,0.53,1.87)); +#68217 = LINE('',#68218,#68219); +#68218 = CARTESIAN_POINT('',(7.145,0.53,2.15)); +#68219 = VECTOR('',#68220,1.); +#68220 = DIRECTION('',(0.,-2.2E-16,-1.)); +#68221 = ORIENTED_EDGE('',*,*,#68222,.F.); +#68222 = EDGE_CURVE('',#68223,#68215,#68225,.T.); +#68223 = VERTEX_POINT('',#68224); +#68224 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#68225 = LINE('',#68226,#68227); +#68226 = CARTESIAN_POINT('',(7.145,-4.62,1.87)); +#68227 = VECTOR('',#68228,1.); +#68228 = DIRECTION('',(0.,1.,-3.3E-16)); +#68229 = ORIENTED_EDGE('',*,*,#68230,.F.); +#68230 = EDGE_CURVE('',#68231,#68223,#68233,.T.); +#68231 = VERTEX_POINT('',#68232); +#68232 = CARTESIAN_POINT('',(7.145,-0.63,1.615)); +#68233 = LINE('',#68234,#68235); +#68234 = CARTESIAN_POINT('',(7.145,-0.63,1.8825)); +#68235 = VECTOR('',#68236,1.); +#68236 = DIRECTION('',(0.,3.3E-16,1.)); +#68237 = ORIENTED_EDGE('',*,*,#68238,.F.); +#68238 = EDGE_CURVE('',#68239,#68231,#68241,.T.); +#68239 = VERTEX_POINT('',#68240); +#68240 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#68241 = LINE('',#68242,#68243); +#68242 = CARTESIAN_POINT('',(7.145,-5.435,1.615)); +#68243 = VECTOR('',#68244,1.); +#68244 = DIRECTION('',(0.,1.,-3.3E-16)); +#68245 = ORIENTED_EDGE('',*,*,#68246,.F.); +#68246 = EDGE_CURVE('',#67403,#68239,#68247,.T.); +#68247 = LINE('',#68248,#68249); +#68248 = CARTESIAN_POINT('',(7.145,-5.435,1.615)); +#68249 = VECTOR('',#68250,1.); +#68250 = DIRECTION('',(0.,1.,-3.3E-16)); +#68251 = ORIENTED_EDGE('',*,*,#67410,.F.); +#68252 = ORIENTED_EDGE('',*,*,#68253,.F.); +#68253 = EDGE_CURVE('',#67221,#67411,#68254,.T.); +#68254 = LINE('',#68255,#68256); +#68255 = CARTESIAN_POINT('',(7.145,-8.61,1.59)); +#68256 = VECTOR('',#68257,1.); +#68257 = DIRECTION('',(0.,1.,-2.2E-16)); +#68258 = ORIENTED_EDGE('',*,*,#67218,.F.); +#68259 = ORIENTED_EDGE('',*,*,#68260,.F.); +#68260 = EDGE_CURVE('',#68261,#67219,#68263,.T.); +#68261 = VERTEX_POINT('',#68262); +#68262 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#68263 = LINE('',#68264,#68265); +#68264 = CARTESIAN_POINT('',(7.145,-7.385,1.615)); +#68265 = VECTOR('',#68266,1.); +#68266 = DIRECTION('',(0.,1.,-3.3E-16)); +#68267 = ORIENTED_EDGE('',*,*,#68268,.T.); +#68268 = EDGE_CURVE('',#68261,#68269,#68271,.T.); +#68269 = VERTEX_POINT('',#68270); +#68270 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#68271 = LINE('',#68272,#68273); +#68272 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#68273 = VECTOR('',#68274,1.); +#68274 = DIRECTION('',(-2.8E-16,-1.,2.2E-16)); +#68275 = ORIENTED_EDGE('',*,*,#68276,.F.); +#68276 = EDGE_CURVE('',#67075,#68269,#68277,.T.); +#68277 = LINE('',#68278,#68279); +#68278 = CARTESIAN_POINT('',(7.145,-7.385,1.615)); +#68279 = VECTOR('',#68280,1.); +#68280 = DIRECTION('',(0.,1.,-3.3E-16)); +#68281 = ORIENTED_EDGE('',*,*,#67082,.F.); +#68282 = ORIENTED_EDGE('',*,*,#68191,.F.); +#68283 = PLANE('',#68284); +#68284 = AXIS2_PLACEMENT_3D('',#68285,#68286,#68287); +#68285 = CARTESIAN_POINT('',(7.145,-8.61,2.15)); +#68286 = DIRECTION('',(-1.,0.,0.)); +#68287 = DIRECTION('',(-0.,-2.2E-16,-1.)); +#68288 = ADVANCED_FACE('',(#68289),#68308,.F.); +#68289 = FACE_BOUND('',#68290,.F.); +#68290 = EDGE_LOOP('',(#68291,#68292,#68301,#68307)); +#68291 = ORIENTED_EDGE('',*,*,#68206,.T.); +#68292 = ORIENTED_EDGE('',*,*,#68293,.T.); +#68293 = EDGE_CURVE('',#68207,#68294,#68296,.T.); +#68294 = VERTEX_POINT('',#68295); +#68295 = CARTESIAN_POINT('',(6.145,0.53,3.15)); +#68296 = CIRCLE('',#68297,1.); +#68297 = AXIS2_PLACEMENT_3D('',#68298,#68299,#68300); +#68298 = CARTESIAN_POINT('',(6.145,0.53,2.15)); +#68299 = DIRECTION('',(0.,-1.,2.2E-16)); +#68300 = DIRECTION('',(1.,0.,0.)); +#68301 = ORIENTED_EDGE('',*,*,#68302,.F.); +#68302 = EDGE_CURVE('',#66984,#68294,#68303,.T.); +#68303 = LINE('',#68304,#68305); +#68304 = CARTESIAN_POINT('',(6.145,-8.61,3.15)); +#68305 = VECTOR('',#68306,1.); +#68306 = DIRECTION('',(0.,1.,-2.2E-16)); +#68307 = ORIENTED_EDGE('',*,*,#66983,.F.); +#68308 = CYLINDRICAL_SURFACE('',#68309,1.); +#68309 = AXIS2_PLACEMENT_3D('',#68310,#68311,#68312); +#68310 = CARTESIAN_POINT('',(6.145,-8.61,2.15)); +#68311 = DIRECTION('',(0.,-1.,2.2E-16)); +#68312 = DIRECTION('',(1.,0.,0.)); +#68313 = ADVANCED_FACE('',(#68314),#68325,.T.); +#68314 = FACE_BOUND('',#68315,.T.); +#68315 = EDGE_LOOP('',(#68316,#68317,#68323,#68324)); +#68316 = ORIENTED_EDGE('',*,*,#68000,.T.); +#68317 = ORIENTED_EDGE('',*,*,#68318,.T.); +#68318 = EDGE_CURVE('',#68001,#68294,#68319,.T.); +#68319 = LINE('',#68320,#68321); +#68320 = CARTESIAN_POINT('',(-0.195,0.53,3.15)); +#68321 = VECTOR('',#68322,1.); +#68322 = DIRECTION('',(1.,0.,0.)); +#68323 = ORIENTED_EDGE('',*,*,#68302,.F.); +#68324 = ORIENTED_EDGE('',*,*,#66992,.F.); +#68325 = PLANE('',#68326); +#68326 = AXIS2_PLACEMENT_3D('',#68327,#68328,#68329); +#68327 = CARTESIAN_POINT('',(-0.195,-8.61,3.15)); +#68328 = DIRECTION('',(0.,-2.2E-16,-1.)); +#68329 = DIRECTION('',(1.,0.,0.)); +#68330 = ADVANCED_FACE('',(#68331),#68342,.F.); +#68331 = FACE_BOUND('',#68332,.F.); +#68332 = EDGE_LOOP('',(#68333,#68334,#68335,#68336)); +#68333 = ORIENTED_EDGE('',*,*,#68276,.F.); +#68334 = ORIENTED_EDGE('',*,*,#67074,.T.); +#68335 = ORIENTED_EDGE('',*,*,#67942,.T.); +#68336 = ORIENTED_EDGE('',*,*,#68337,.F.); +#68337 = EDGE_CURVE('',#68269,#67935,#68338,.T.); +#68338 = LINE('',#68339,#68340); +#68339 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#68340 = VECTOR('',#68341,1.); +#68341 = DIRECTION('',(1.,-2.8E-16,2.8E-16)); +#68342 = PLANE('',#68343); +#68343 = AXIS2_PLACEMENT_3D('',#68344,#68345,#68346); +#68344 = CARTESIAN_POINT('',(5.175,-6.16,1.615)); +#68345 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#68346 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68347 = ADVANCED_FACE('',(#68348),#68359,.F.); +#68348 = FACE_BOUND('',#68349,.T.); +#68349 = EDGE_LOOP('',(#68350,#68351,#68352,#68353)); +#68350 = ORIENTED_EDGE('',*,*,#68040,.F.); +#68351 = ORIENTED_EDGE('',*,*,#67131,.T.); +#68352 = ORIENTED_EDGE('',*,*,#67804,.T.); +#68353 = ORIENTED_EDGE('',*,*,#68354,.F.); +#68354 = EDGE_CURVE('',#68041,#67805,#68355,.T.); +#68355 = LINE('',#68356,#68357); +#68356 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#68357 = VECTOR('',#68358,1.); +#68358 = DIRECTION('',(-1.,5.E-16,6.E-17)); +#68359 = PLANE('',#68360); +#68360 = AXIS2_PLACEMENT_3D('',#68361,#68362,#68363); +#68361 = CARTESIAN_POINT('',(0.775,-6.16,1.615)); +#68362 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68363 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68364 = ADVANCED_FACE('',(#68365),#68371,.F.); +#68365 = FACE_BOUND('',#68366,.F.); +#68366 = EDGE_LOOP('',(#68367,#68368,#68369,#68370)); +#68367 = ORIENTED_EDGE('',*,*,#67261,.F.); +#68368 = ORIENTED_EDGE('',*,*,#68144,.T.); +#68369 = ORIENTED_EDGE('',*,*,#67418,.T.); +#68370 = ORIENTED_EDGE('',*,*,#68253,.F.); +#68371 = CYLINDRICAL_SURFACE('',#68372,1.); +#68372 = AXIS2_PLACEMENT_3D('',#68373,#68374,#68375); +#68373 = CARTESIAN_POINT('',(6.145,-8.61,1.59)); +#68374 = DIRECTION('',(0.,-1.,2.2E-16)); +#68375 = DIRECTION('',(1.,0.,0.)); +#68376 = ADVANCED_FACE('',(#68377),#68388,.F.); +#68377 = FACE_BOUND('',#68378,.F.); +#68378 = EDGE_LOOP('',(#68379,#68380,#68386,#68387)); +#68379 = ORIENTED_EDGE('',*,*,#68260,.F.); +#68380 = ORIENTED_EDGE('',*,*,#68381,.F.); +#68381 = EDGE_CURVE('',#67927,#68261,#68382,.T.); +#68382 = LINE('',#68383,#68384); +#68383 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#68384 = VECTOR('',#68385,1.); +#68385 = DIRECTION('',(-1.,2.8E-16,-2.8E-16)); +#68386 = ORIENTED_EDGE('',*,*,#67926,.T.); +#68387 = ORIENTED_EDGE('',*,*,#67228,.F.); +#68388 = PLANE('',#68389); +#68389 = AXIS2_PLACEMENT_3D('',#68390,#68391,#68392); +#68390 = CARTESIAN_POINT('',(5.175,-6.16,1.615)); +#68391 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#68392 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68393 = ADVANCED_FACE('',(#68394),#68400,.F.); +#68394 = FACE_BOUND('',#68395,.F.); +#68395 = EDGE_LOOP('',(#68396,#68397,#68398,#68399)); +#68396 = ORIENTED_EDGE('',*,*,#67319,.F.); +#68397 = ORIENTED_EDGE('',*,*,#68063,.T.); +#68398 = ORIENTED_EDGE('',*,*,#67475,.T.); +#68399 = ORIENTED_EDGE('',*,*,#68170,.F.); +#68400 = CYLINDRICAL_SURFACE('',#68401,1.); +#68401 = AXIS2_PLACEMENT_3D('',#68402,#68403,#68404); +#68402 = CARTESIAN_POINT('',(-0.195,-8.61,1.59)); +#68403 = DIRECTION('',(0.,-1.,2.2E-16)); +#68404 = DIRECTION('',(1.,0.,0.)); +#68405 = ADVANCED_FACE('',(#68406),#68417,.F.); +#68406 = FACE_BOUND('',#68407,.T.); +#68407 = EDGE_LOOP('',(#68408,#68409,#68415,#68416)); +#68408 = ORIENTED_EDGE('',*,*,#68056,.F.); +#68409 = ORIENTED_EDGE('',*,*,#68410,.F.); +#68410 = EDGE_CURVE('',#67813,#68049,#68411,.T.); +#68411 = LINE('',#68412,#68413); +#68412 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#68413 = VECTOR('',#68414,1.); +#68414 = DIRECTION('',(1.,-5.E-16,-6.E-17)); +#68415 = ORIENTED_EDGE('',*,*,#67820,.T.); +#68416 = ORIENTED_EDGE('',*,*,#67286,.F.); +#68417 = PLANE('',#68418); +#68418 = AXIS2_PLACEMENT_3D('',#68419,#68420,#68421); +#68419 = CARTESIAN_POINT('',(0.775,-6.16,1.615)); +#68420 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68421 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68422 = ADVANCED_FACE('',(#68423),#68434,.F.); +#68423 = FACE_BOUND('',#68424,.F.); +#68424 = EDGE_LOOP('',(#68425,#68426,#68427,#68428)); +#68425 = ORIENTED_EDGE('',*,*,#68246,.F.); +#68426 = ORIENTED_EDGE('',*,*,#67402,.T.); +#68427 = ORIENTED_EDGE('',*,*,#67917,.T.); +#68428 = ORIENTED_EDGE('',*,*,#68429,.F.); +#68429 = EDGE_CURVE('',#68239,#67910,#68430,.T.); +#68430 = LINE('',#68431,#68432); +#68431 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#68432 = VECTOR('',#68433,1.); +#68433 = DIRECTION('',(1.,-2.8E-16,2.8E-16)); +#68434 = PLANE('',#68435); +#68435 = AXIS2_PLACEMENT_3D('',#68436,#68437,#68438); +#68436 = CARTESIAN_POINT('',(5.175,-2.26,1.615)); +#68437 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#68438 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68439 = ADVANCED_FACE('',(#68440),#68451,.F.); +#68440 = FACE_BOUND('',#68441,.T.); +#68441 = EDGE_LOOP('',(#68442,#68443,#68444,#68445)); +#68442 = ORIENTED_EDGE('',*,*,#68070,.F.); +#68443 = ORIENTED_EDGE('',*,*,#67459,.T.); +#68444 = ORIENTED_EDGE('',*,*,#67829,.T.); +#68445 = ORIENTED_EDGE('',*,*,#68446,.F.); +#68446 = EDGE_CURVE('',#68071,#67830,#68447,.T.); +#68447 = LINE('',#68448,#68449); +#68448 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#68449 = VECTOR('',#68450,1.); +#68450 = DIRECTION('',(-1.,5.E-16,6.E-17)); +#68451 = PLANE('',#68452); +#68452 = AXIS2_PLACEMENT_3D('',#68453,#68454,#68455); +#68453 = CARTESIAN_POINT('',(0.775,-2.26,1.615)); +#68454 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68455 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68456 = ADVANCED_FACE('',(#68457),#68476,.T.); +#68457 = FACE_BOUND('',#68458,.T.); +#68458 = EDGE_LOOP('',(#68459,#68468,#68469,#68470)); +#68459 = ORIENTED_EDGE('',*,*,#68460,.T.); +#68460 = EDGE_CURVE('',#68461,#67501,#68463,.T.); +#68461 = VERTEX_POINT('',#68462); +#68462 = CARTESIAN_POINT('',(4.159345434565,-2.26,0.613423053241)); +#68463 = CIRCLE('',#68464,0.25); +#68464 = AXIS2_PLACEMENT_3D('',#68465,#68466,#68467); +#68465 = CARTESIAN_POINT('',(4.265,-2.26,0.84)); +#68466 = DIRECTION('',(0.,-1.,2.2E-16)); +#68467 = DIRECTION('',(1.,-7.81E-31,-3.55E-15)); +#68468 = ORIENTED_EDGE('',*,*,#67508,.F.); +#68469 = ORIENTED_EDGE('',*,*,#67546,.F.); +#68470 = ORIENTED_EDGE('',*,*,#68471,.F.); +#68471 = EDGE_CURVE('',#68461,#67547,#68472,.T.); +#68472 = LINE('',#68473,#68474); +#68473 = CARTESIAN_POINT('',(3.90577447752,-2.26,6.963838101885E-02)); +#68474 = VECTOR('',#68475,1.); +#68475 = DIRECTION('',(-0.422618261741,-5.299999999998E-16, + -0.906307787037)); +#68476 = PLANE('',#68477); +#68477 = AXIS2_PLACEMENT_3D('',#68478,#68479,#68480); +#68478 = CARTESIAN_POINT('',(4.178424154425,-2.26,0.449481597152)); +#68479 = DIRECTION('',(0.,1.,-2.2E-16)); +#68480 = DIRECTION('',(0.97629600712,-4.761671506636E-17,-0.216439613938 + )); +#68481 = ADVANCED_FACE('',(#68482),#68501,.T.); +#68482 = FACE_BOUND('',#68483,.F.); +#68483 = EDGE_LOOP('',(#68484,#68493,#68494,#68495)); +#68484 = ORIENTED_EDGE('',*,*,#68485,.T.); +#68485 = EDGE_CURVE('',#68486,#67525,#68488,.T.); +#68486 = VERTEX_POINT('',#68487); +#68487 = CARTESIAN_POINT('',(1.790654565435,-2.26,0.613423053241)); +#68488 = CIRCLE('',#68489,0.25); +#68489 = AXIS2_PLACEMENT_3D('',#68490,#68491,#68492); +#68490 = CARTESIAN_POINT('',(1.685,-2.26,0.84)); +#68491 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68492 = DIRECTION('',(-1.,2.2E-16,-3.77E-15)); +#68493 = ORIENTED_EDGE('',*,*,#67532,.F.); +#68494 = ORIENTED_EDGE('',*,*,#67597,.F.); +#68495 = ORIENTED_EDGE('',*,*,#68496,.F.); +#68496 = EDGE_CURVE('',#68486,#67580,#68497,.T.); +#68497 = LINE('',#68498,#68499); +#68498 = CARTESIAN_POINT('',(2.04422552248,-2.26,6.963838101885E-02)); +#68499 = VECTOR('',#68500,1.); +#68500 = DIRECTION('',(0.422618261741,-6.299999999997E-16, + -0.906307787037)); +#68501 = PLANE('',#68502); +#68502 = AXIS2_PLACEMENT_3D('',#68503,#68504,#68505); +#68503 = CARTESIAN_POINT('',(1.771575845575,-2.26,0.449481597152)); +#68504 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68505 = DIRECTION('',(0.97629600712,-1.671684065E-16,0.216439613938)); +#68506 = ADVANCED_FACE('',(#68507),#68532,.F.); +#68507 = FACE_BOUND('',#68508,.F.); +#68508 = EDGE_LOOP('',(#68509,#68517,#68525,#68531)); +#68509 = ORIENTED_EDGE('',*,*,#68510,.F.); +#68510 = EDGE_CURVE('',#68511,#67547,#68513,.T.); +#68511 = VERTEX_POINT('',#68512); +#68512 = CARTESIAN_POINT('',(3.461607260739,-2.26,0.607770331394)); +#68513 = LINE('',#68514,#68515); +#68514 = CARTESIAN_POINT('',(3.461607260739,-2.26,0.607770331394)); +#68515 = VECTOR('',#68516,1.); +#68516 = DIRECTION('',(0.906307787037,4.999999999998E-17,-0.422618261741 + )); +#68517 = ORIENTED_EDGE('',*,*,#68518,.F.); +#68518 = EDGE_CURVE('',#68519,#68511,#68521,.T.); +#68519 = VERTEX_POINT('',#68520); +#68520 = CARTESIAN_POINT('',(3.461607260739,-2.66,0.607770331394)); +#68521 = LINE('',#68522,#68523); +#68522 = CARTESIAN_POINT('',(3.461607260739,-5.435,0.607770331394)); +#68523 = VECTOR('',#68524,1.); +#68524 = DIRECTION('',(-5.E-16,1.,-9.7E-16)); +#68525 = ORIENTED_EDGE('',*,*,#68526,.T.); +#68526 = EDGE_CURVE('',#68519,#67557,#68527,.T.); +#68527 = LINE('',#68528,#68529); +#68528 = CARTESIAN_POINT('',(3.461607260739,-2.66,0.607770331394)); +#68529 = VECTOR('',#68530,1.); +#68530 = DIRECTION('',(0.906307787037,4.999999999998E-17,-0.422618261741 + )); +#68531 = ORIENTED_EDGE('',*,*,#67565,.F.); +#68532 = PLANE('',#68533); +#68533 = AXIS2_PLACEMENT_3D('',#68534,#68535,#68536); +#68534 = CARTESIAN_POINT('',(3.461607260739,-5.435,0.607770331394)); +#68535 = DIRECTION('',(0.422618261741,1.09E-15,0.906307787037)); +#68536 = DIRECTION('',(4.998192528061E-16,-1.,9.696123863918E-16)); +#68537 = ADVANCED_FACE('',(#68538),#68557,.T.); +#68538 = FACE_BOUND('',#68539,.T.); +#68539 = EDGE_LOOP('',(#68540,#68541,#68542,#68551)); +#68540 = ORIENTED_EDGE('',*,*,#67556,.T.); +#68541 = ORIENTED_EDGE('',*,*,#67612,.T.); +#68542 = ORIENTED_EDGE('',*,*,#68543,.F.); +#68543 = EDGE_CURVE('',#68544,#67613,#68546,.T.); +#68544 = VERTEX_POINT('',#68545); +#68545 = CARTESIAN_POINT('',(4.159345434565,-2.66,0.613423053241)); +#68546 = CIRCLE('',#68547,0.25); +#68547 = AXIS2_PLACEMENT_3D('',#68548,#68549,#68550); +#68548 = CARTESIAN_POINT('',(4.265,-2.66,0.84)); +#68549 = DIRECTION('',(0.,-1.,2.2E-16)); +#68550 = DIRECTION('',(1.,-9.68E-32,-4.4E-16)); +#68551 = ORIENTED_EDGE('',*,*,#68552,.F.); +#68552 = EDGE_CURVE('',#67557,#68544,#68553,.T.); +#68553 = LINE('',#68554,#68555); +#68554 = CARTESIAN_POINT('',(3.90577447752,-2.66,6.963838101885E-02)); +#68555 = VECTOR('',#68556,1.); +#68556 = DIRECTION('',(0.422618261741,5.299999999998E-16,0.906307787037) + ); +#68557 = PLANE('',#68558); +#68558 = AXIS2_PLACEMENT_3D('',#68559,#68560,#68561); +#68559 = CARTESIAN_POINT('',(4.178424154425,-2.66,0.449481597152)); +#68560 = DIRECTION('',(0.,-1.,2.2E-16)); +#68561 = DIRECTION('',(0.97629600712,-4.761671506636E-17,-0.216439613938 + )); +#68562 = ADVANCED_FACE('',(#68563),#68588,.F.); +#68563 = FACE_BOUND('',#68564,.T.); +#68564 = EDGE_LOOP('',(#68565,#68573,#68581,#68587)); +#68565 = ORIENTED_EDGE('',*,*,#68566,.F.); +#68566 = EDGE_CURVE('',#68567,#67580,#68569,.T.); +#68567 = VERTEX_POINT('',#68568); +#68568 = CARTESIAN_POINT('',(2.488392739261,-2.26,0.607770331394)); +#68569 = LINE('',#68570,#68571); +#68570 = CARTESIAN_POINT('',(2.488392739261,-2.26,0.607770331394)); +#68571 = VECTOR('',#68572,1.); +#68572 = DIRECTION('',(-0.906307787037,2.499999999999E-16, + -0.422618261741)); +#68573 = ORIENTED_EDGE('',*,*,#68574,.F.); +#68574 = EDGE_CURVE('',#68575,#68567,#68577,.T.); +#68575 = VERTEX_POINT('',#68576); +#68576 = CARTESIAN_POINT('',(2.488392739261,-2.66,0.607770331394)); +#68577 = LINE('',#68578,#68579); +#68578 = CARTESIAN_POINT('',(2.488392739261,-5.435,0.607770331394)); +#68579 = VECTOR('',#68580,1.); +#68580 = DIRECTION('',(7.2E-16,1.,-9.7E-16)); +#68581 = ORIENTED_EDGE('',*,*,#68582,.T.); +#68582 = EDGE_CURVE('',#68575,#67582,#68583,.T.); +#68583 = LINE('',#68584,#68585); +#68584 = CARTESIAN_POINT('',(2.488392739261,-2.66,0.607770331394)); +#68585 = VECTOR('',#68586,1.); +#68586 = DIRECTION('',(-0.906307787037,2.499999999999E-16, + -0.422618261741)); +#68587 = ORIENTED_EDGE('',*,*,#67579,.F.); +#68588 = PLANE('',#68589); +#68589 = AXIS2_PLACEMENT_3D('',#68590,#68591,#68592); +#68590 = CARTESIAN_POINT('',(2.488392739261,-5.435,0.607770331394)); +#68591 = DIRECTION('',(-0.422618261741,1.179999999999E-15,0.906307787037 + )); +#68592 = DIRECTION('',(7.185615334283E-16,1.,-9.669151984819E-16)); +#68593 = ADVANCED_FACE('',(#68594),#68613,.T.); +#68594 = FACE_BOUND('',#68595,.F.); +#68595 = EDGE_LOOP('',(#68596,#68597,#68598,#68607)); +#68596 = ORIENTED_EDGE('',*,*,#67589,.T.); +#68597 = ORIENTED_EDGE('',*,*,#67662,.T.); +#68598 = ORIENTED_EDGE('',*,*,#68599,.F.); +#68599 = EDGE_CURVE('',#68600,#67654,#68602,.T.); +#68600 = VERTEX_POINT('',#68601); +#68601 = CARTESIAN_POINT('',(1.790654565435,-2.66,0.613423053241)); +#68602 = CIRCLE('',#68603,0.25); +#68603 = AXIS2_PLACEMENT_3D('',#68604,#68605,#68606); +#68604 = CARTESIAN_POINT('',(1.685,-2.66,0.84)); +#68605 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68606 = DIRECTION('',(-1.,2.2E-16,-6.7E-16)); +#68607 = ORIENTED_EDGE('',*,*,#68608,.F.); +#68608 = EDGE_CURVE('',#67582,#68600,#68609,.T.); +#68609 = LINE('',#68610,#68611); +#68610 = CARTESIAN_POINT('',(2.04422552248,-2.66,6.963838101885E-02)); +#68611 = VECTOR('',#68612,1.); +#68612 = DIRECTION('',(-0.422618261741,6.299999999997E-16,0.906307787037 + )); +#68613 = PLANE('',#68614); +#68614 = AXIS2_PLACEMENT_3D('',#68615,#68616,#68617); +#68615 = CARTESIAN_POINT('',(1.771575845575,-2.66,0.449481597152)); +#68616 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#68617 = DIRECTION('',(0.97629600712,-1.671684065E-16,0.216439613938)); +#68618 = ADVANCED_FACE('',(#68619),#68638,.T.); +#68619 = FACE_BOUND('',#68620,.T.); +#68620 = EDGE_LOOP('',(#68621,#68630,#68636,#68637)); +#68621 = ORIENTED_EDGE('',*,*,#68622,.F.); +#68622 = EDGE_CURVE('',#68623,#68623,#68625,.T.); +#68623 = VERTEX_POINT('',#68624); +#68624 = CARTESIAN_POINT('',(0.435,-2.85,9.E-02)); +#68625 = CIRCLE('',#68626,0.35); +#68626 = AXIS2_PLACEMENT_3D('',#68627,#68628,#68629); +#68627 = CARTESIAN_POINT('',(0.785,-2.85,9.E-02)); +#68628 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#68629 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#68630 = ORIENTED_EDGE('',*,*,#68631,.F.); +#68631 = EDGE_CURVE('',#67718,#68623,#68632,.T.); +#68632 = LINE('',#68633,#68634); +#68633 = CARTESIAN_POINT('',(0.435,-2.85,0.29)); +#68634 = VECTOR('',#68635,1.); +#68635 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#68636 = ORIENTED_EDGE('',*,*,#67717,.T.); +#68637 = ORIENTED_EDGE('',*,*,#68631,.T.); +#68638 = CYLINDRICAL_SURFACE('',#68639,0.35); +#68639 = AXIS2_PLACEMENT_3D('',#68640,#68641,#68642); +#68640 = CARTESIAN_POINT('',(0.785,-2.85,0.29)); +#68641 = DIRECTION('',(-2.2E-16,1.1E-16,1.)); +#68642 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#68643 = ADVANCED_FACE('',(#68644),#68663,.T.); +#68644 = FACE_BOUND('',#68645,.T.); +#68645 = EDGE_LOOP('',(#68646,#68654,#68661,#68662)); +#68646 = ORIENTED_EDGE('',*,*,#68647,.T.); +#68647 = EDGE_CURVE('',#67744,#68648,#68650,.T.); +#68648 = VERTEX_POINT('',#68649); +#68649 = CARTESIAN_POINT('',(5.515,-2.85,9.E-02)); +#68650 = LINE('',#68651,#68652); +#68651 = CARTESIAN_POINT('',(5.515,-2.85,0.29)); +#68652 = VECTOR('',#68653,1.); +#68653 = DIRECTION('',(-0.,-1.1E-16,-1.)); +#68654 = ORIENTED_EDGE('',*,*,#68655,.T.); +#68655 = EDGE_CURVE('',#68648,#68648,#68656,.T.); +#68656 = CIRCLE('',#68657,0.35); +#68657 = AXIS2_PLACEMENT_3D('',#68658,#68659,#68660); +#68658 = CARTESIAN_POINT('',(5.165,-2.85,9.E-02)); +#68659 = DIRECTION('',(-1.81528329172E-49,1.1E-16,1.)); +#68660 = DIRECTION('',(1.,-3.E-17,3.3E-33)); +#68661 = ORIENTED_EDGE('',*,*,#68647,.F.); +#68662 = ORIENTED_EDGE('',*,*,#67754,.F.); +#68663 = CYLINDRICAL_SURFACE('',#68664,0.35); +#68664 = AXIS2_PLACEMENT_3D('',#68665,#68666,#68667); +#68665 = CARTESIAN_POINT('',(5.165,-2.85,0.29)); +#68666 = DIRECTION('',(0.,1.1E-16,1.)); +#68667 = DIRECTION('',(1.,0.,-0.)); +#68668 = ADVANCED_FACE('',(#68669),#68693,.T.); +#68669 = FACE_BOUND('',#68670,.T.); +#68670 = EDGE_LOOP('',(#68671,#68672,#68673,#68674,#68675,#68681,#68682, + #68683,#68684,#68685,#68686,#68692)); +#68671 = ORIENTED_EDGE('',*,*,#67777,.F.); +#68672 = ORIENTED_EDGE('',*,*,#67984,.T.); +#68673 = ORIENTED_EDGE('',*,*,#67959,.F.); +#68674 = ORIENTED_EDGE('',*,*,#67885,.T.); +#68675 = ORIENTED_EDGE('',*,*,#68676,.F.); +#68676 = EDGE_CURVE('',#68215,#67886,#68677,.T.); +#68677 = LINE('',#68678,#68679); +#68678 = CARTESIAN_POINT('',(5.175,0.53,1.87)); +#68679 = VECTOR('',#68680,1.); +#68680 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#68681 = ORIENTED_EDGE('',*,*,#68214,.F.); +#68682 = ORIENTED_EDGE('',*,*,#68293,.T.); +#68683 = ORIENTED_EDGE('',*,*,#68318,.F.); +#68684 = ORIENTED_EDGE('',*,*,#68008,.T.); +#68685 = ORIENTED_EDGE('',*,*,#68102,.F.); +#68686 = ORIENTED_EDGE('',*,*,#68687,.T.); +#68687 = EDGE_CURVE('',#68095,#67854,#68688,.T.); +#68688 = LINE('',#68689,#68690); +#68689 = CARTESIAN_POINT('',(0.775,0.53,1.87)); +#68690 = VECTOR('',#68691,1.); +#68691 = DIRECTION('',(-1.,0.,6.E-17)); +#68692 = ORIENTED_EDGE('',*,*,#67861,.T.); +#68693 = PLANE('',#68694); +#68694 = AXIS2_PLACEMENT_3D('',#68695,#68696,#68697); +#68695 = CARTESIAN_POINT('',(2.975,0.53,1.87)); +#68696 = DIRECTION('',(0.,1.,0.)); +#68697 = DIRECTION('',(0.,-0.,1.)); +#68698 = ADVANCED_FACE('',(#68699),#68710,.F.); +#68699 = FACE_BOUND('',#68700,.T.); +#68700 = EDGE_LOOP('',(#68701,#68702,#68708,#68709)); +#68701 = ORIENTED_EDGE('',*,*,#68094,.F.); +#68702 = ORIENTED_EDGE('',*,*,#68703,.T.); +#68703 = EDGE_CURVE('',#68087,#67846,#68704,.T.); +#68704 = LINE('',#68705,#68706); +#68705 = CARTESIAN_POINT('',(0.775,-0.63,1.87)); +#68706 = VECTOR('',#68707,1.); +#68707 = DIRECTION('',(-1.,0.,6.E-17)); +#68708 = ORIENTED_EDGE('',*,*,#67853,.T.); +#68709 = ORIENTED_EDGE('',*,*,#68687,.F.); +#68710 = PLANE('',#68711); +#68711 = AXIS2_PLACEMENT_3D('',#68712,#68713,#68714); +#68712 = CARTESIAN_POINT('',(0.775,-0.63,1.87)); +#68713 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#68714 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#68715 = ADVANCED_FACE('',(#68716),#68727,.F.); +#68716 = FACE_BOUND('',#68717,.T.); +#68717 = EDGE_LOOP('',(#68718,#68719,#68725,#68726)); +#68718 = ORIENTED_EDGE('',*,*,#68086,.F.); +#68719 = ORIENTED_EDGE('',*,*,#68720,.T.); +#68720 = EDGE_CURVE('',#68079,#67838,#68721,.T.); +#68721 = LINE('',#68722,#68723); +#68722 = CARTESIAN_POINT('',(0.775,-0.63,1.615)); +#68723 = VECTOR('',#68724,1.); +#68724 = DIRECTION('',(-1.,0.,6.E-17)); +#68725 = ORIENTED_EDGE('',*,*,#67845,.T.); +#68726 = ORIENTED_EDGE('',*,*,#68703,.F.); +#68727 = PLANE('',#68728); +#68728 = AXIS2_PLACEMENT_3D('',#68729,#68730,#68731); +#68729 = CARTESIAN_POINT('',(0.775,-0.63,1.615)); +#68730 = DIRECTION('',(0.,-1.,3.3E-16)); +#68731 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#68732 = ADVANCED_FACE('',(#68733),#68800,.T.); +#68733 = FACE_BOUND('',#68734,.F.); +#68734 = EDGE_LOOP('',(#68735,#68745,#68753,#68761,#68767,#68768,#68776, + #68785,#68793)); +#68735 = ORIENTED_EDGE('',*,*,#68736,.F.); +#68736 = EDGE_CURVE('',#68737,#68739,#68741,.T.); +#68737 = VERTEX_POINT('',#68738); +#68738 = CARTESIAN_POINT('',(-1.495,-0.23,0.885)); +#68739 = VERTEX_POINT('',#68740); +#68740 = CARTESIAN_POINT('',(-1.495,-0.23,-1.91)); +#68741 = LINE('',#68742,#68743); +#68742 = CARTESIAN_POINT('',(-1.495,-0.23,1.615)); +#68743 = VECTOR('',#68744,1.); +#68744 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68745 = ORIENTED_EDGE('',*,*,#68746,.F.); +#68746 = EDGE_CURVE('',#68747,#68737,#68749,.T.); +#68747 = VERTEX_POINT('',#68748); +#68748 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#68749 = LINE('',#68750,#68751); +#68750 = CARTESIAN_POINT('',(-1.495,-0.23,1.615)); +#68751 = VECTOR('',#68752,1.); +#68752 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68753 = ORIENTED_EDGE('',*,*,#68754,.F.); +#68754 = EDGE_CURVE('',#68755,#68747,#68757,.T.); +#68755 = VERTEX_POINT('',#68756); +#68756 = CARTESIAN_POINT('',(-1.495,-0.63,1.285)); +#68757 = LINE('',#68758,#68759); +#68758 = CARTESIAN_POINT('',(-1.495,-1.73,1.285)); +#68759 = VECTOR('',#68760,1.); +#68760 = DIRECTION('',(5.E-16,1.,-2.2E-16)); +#68761 = ORIENTED_EDGE('',*,*,#68762,.F.); +#68762 = EDGE_CURVE('',#67838,#68755,#68763,.T.); +#68763 = LINE('',#68764,#68765); +#68764 = CARTESIAN_POINT('',(-1.495,-0.63,1.615)); +#68765 = VECTOR('',#68766,1.); +#68766 = DIRECTION('',(2.2E-16,-6.7E-16,-1.)); +#68767 = ORIENTED_EDGE('',*,*,#67837,.F.); +#68768 = ORIENTED_EDGE('',*,*,#68769,.T.); +#68769 = EDGE_CURVE('',#67830,#68770,#68772,.T.); +#68770 = VERTEX_POINT('',#68771); +#68771 = CARTESIAN_POINT('',(-1.495,-1.73,-1.91)); +#68772 = LINE('',#68773,#68774); +#68773 = CARTESIAN_POINT('',(-1.495,-1.73,1.615)); +#68774 = VECTOR('',#68775,1.); +#68775 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68776 = ORIENTED_EDGE('',*,*,#68777,.T.); +#68777 = EDGE_CURVE('',#68770,#68778,#68780,.T.); +#68778 = VERTEX_POINT('',#68779); +#68779 = CARTESIAN_POINT('',(-1.495,-1.53,-2.11)); +#68780 = CIRCLE('',#68781,0.2); +#68781 = AXIS2_PLACEMENT_3D('',#68782,#68783,#68784); +#68782 = CARTESIAN_POINT('',(-1.495,-1.53,-1.91)); +#68783 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#68784 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68785 = ORIENTED_EDGE('',*,*,#68786,.T.); +#68786 = EDGE_CURVE('',#68778,#68787,#68789,.T.); +#68787 = VERTEX_POINT('',#68788); +#68788 = CARTESIAN_POINT('',(-1.495,-0.43,-2.11)); +#68789 = LINE('',#68790,#68791); +#68790 = CARTESIAN_POINT('',(-1.495,-1.73,-2.11)); +#68791 = VECTOR('',#68792,1.); +#68792 = DIRECTION('',(5.E-16,1.,-2.2E-16)); +#68793 = ORIENTED_EDGE('',*,*,#68794,.F.); +#68794 = EDGE_CURVE('',#68739,#68787,#68795,.T.); +#68795 = CIRCLE('',#68796,0.2); +#68796 = AXIS2_PLACEMENT_3D('',#68797,#68798,#68799); +#68797 = CARTESIAN_POINT('',(-1.495,-0.43,-1.91)); +#68798 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#68799 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#68800 = PLANE('',#68801); +#68801 = AXIS2_PLACEMENT_3D('',#68802,#68803,#68804); +#68802 = CARTESIAN_POINT('',(-1.495,-1.73,1.615)); +#68803 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#68804 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#68805 = ADVANCED_FACE('',(#68806),#68892,.T.); +#68806 = FACE_BOUND('',#68807,.F.); +#68807 = EDGE_LOOP('',(#68808,#68816,#68817,#68825,#68834,#68842,#68851, + #68860,#68868,#68877,#68885)); +#68808 = ORIENTED_EDGE('',*,*,#68809,.F.); +#68809 = EDGE_CURVE('',#67813,#68810,#68812,.T.); +#68810 = VERTEX_POINT('',#68811); +#68811 = CARTESIAN_POINT('',(-1.495,-3.96,-0.61)); +#68812 = LINE('',#68813,#68814); +#68813 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#68814 = VECTOR('',#68815,1.); +#68815 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68816 = ORIENTED_EDGE('',*,*,#67812,.F.); +#68817 = ORIENTED_EDGE('',*,*,#68818,.T.); +#68818 = EDGE_CURVE('',#67805,#68819,#68821,.T.); +#68819 = VERTEX_POINT('',#68820); +#68820 = CARTESIAN_POINT('',(-1.495,-5.56,0.19)); +#68821 = LINE('',#68822,#68823); +#68822 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#68823 = VECTOR('',#68824,1.); +#68824 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#68825 = ORIENTED_EDGE('',*,*,#68826,.T.); +#68826 = EDGE_CURVE('',#68819,#68827,#68829,.T.); +#68827 = VERTEX_POINT('',#68828); +#68828 = CARTESIAN_POINT('',(-1.495,-5.36,-1.E-02)); +#68829 = CIRCLE('',#68830,0.2); +#68830 = AXIS2_PLACEMENT_3D('',#68831,#68832,#68833); +#68831 = CARTESIAN_POINT('',(-1.495,-5.36,0.19)); +#68832 = DIRECTION('',(1.,0.,-6.E-17)); +#68833 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#68834 = ORIENTED_EDGE('',*,*,#68835,.T.); +#68835 = EDGE_CURVE('',#68827,#68836,#68838,.T.); +#68836 = VERTEX_POINT('',#68837); +#68837 = CARTESIAN_POINT('',(-1.495,-5.21,-1.E-02)); +#68838 = LINE('',#68839,#68840); +#68839 = CARTESIAN_POINT('',(-1.495,-5.56,-1.E-02)); +#68840 = VECTOR('',#68841,1.); +#68841 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#68842 = ORIENTED_EDGE('',*,*,#68843,.T.); +#68843 = EDGE_CURVE('',#68836,#68844,#68846,.T.); +#68844 = VERTEX_POINT('',#68845); +#68845 = CARTESIAN_POINT('',(-1.495,-5.067355715851,7.23557158515E-02)); +#68846 = CIRCLE('',#68847,0.164711431703); +#68847 = AXIS2_PLACEMENT_3D('',#68848,#68849,#68850); +#68848 = CARTESIAN_POINT('',(-1.495,-5.21,0.154711431703)); +#68849 = DIRECTION('',(1.,-0.,0.)); +#68850 = DIRECTION('',(0.,1.,-2.2E-16)); +#68851 = ORIENTED_EDGE('',*,*,#68852,.F.); +#68852 = EDGE_CURVE('',#68853,#68844,#68855,.T.); +#68853 = VERTEX_POINT('',#68854); +#68854 = CARTESIAN_POINT('',(-1.495,-4.76,-1.E-02)); +#68855 = CIRCLE('',#68856,0.164711431703); +#68856 = AXIS2_PLACEMENT_3D('',#68857,#68858,#68859); +#68857 = CARTESIAN_POINT('',(-1.495,-4.924711431703,-1.E-02)); +#68858 = DIRECTION('',(1.,-0.,0.)); +#68859 = DIRECTION('',(0.,1.,-2.2E-16)); +#68860 = ORIENTED_EDGE('',*,*,#68861,.F.); +#68861 = EDGE_CURVE('',#68862,#68853,#68864,.T.); +#68862 = VERTEX_POINT('',#68863); +#68863 = CARTESIAN_POINT('',(-1.495,-4.76,-0.61)); +#68864 = LINE('',#68865,#68866); +#68865 = CARTESIAN_POINT('',(-1.495,-4.76,0.4025)); +#68866 = VECTOR('',#68867,1.); +#68867 = DIRECTION('',(6.E-17,2.2E-16,1.)); +#68868 = ORIENTED_EDGE('',*,*,#68869,.F.); +#68869 = EDGE_CURVE('',#68870,#68862,#68872,.T.); +#68870 = VERTEX_POINT('',#68871); +#68871 = CARTESIAN_POINT('',(-1.495,-4.56,-0.81)); +#68872 = CIRCLE('',#68873,0.2); +#68873 = AXIS2_PLACEMENT_3D('',#68874,#68875,#68876); +#68874 = CARTESIAN_POINT('',(-1.495,-4.56,-0.61)); +#68875 = DIRECTION('',(-1.,0.,6.E-17)); +#68876 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#68877 = ORIENTED_EDGE('',*,*,#68878,.F.); +#68878 = EDGE_CURVE('',#68879,#68870,#68881,.T.); +#68879 = VERTEX_POINT('',#68880); +#68880 = CARTESIAN_POINT('',(-1.495,-4.16,-0.81)); +#68881 = LINE('',#68882,#68883); +#68882 = CARTESIAN_POINT('',(-1.495,-4.76,-0.81)); +#68883 = VECTOR('',#68884,1.); +#68884 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#68885 = ORIENTED_EDGE('',*,*,#68886,.F.); +#68886 = EDGE_CURVE('',#68810,#68879,#68887,.T.); +#68887 = CIRCLE('',#68888,0.2); +#68888 = AXIS2_PLACEMENT_3D('',#68889,#68890,#68891); +#68889 = CARTESIAN_POINT('',(-1.495,-4.16,-0.61)); +#68890 = DIRECTION('',(-1.,0.,6.E-17)); +#68891 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#68892 = PLANE('',#68893); +#68893 = AXIS2_PLACEMENT_3D('',#68894,#68895,#68896); +#68894 = CARTESIAN_POINT('',(-1.495,-5.56,1.615)); +#68895 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#68896 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#68897 = ADVANCED_FACE('',(#68898),#68984,.T.); +#68898 = FACE_BOUND('',#68899,.T.); +#68899 = EDGE_LOOP('',(#68900,#68908,#68909,#68917,#68926,#68934,#68943, + #68952,#68960,#68969,#68977)); +#68900 = ORIENTED_EDGE('',*,*,#68901,.F.); +#68901 = EDGE_CURVE('',#67927,#68902,#68904,.T.); +#68902 = VERTEX_POINT('',#68903); +#68903 = CARTESIAN_POINT('',(7.445,-3.96,-0.61)); +#68904 = LINE('',#68905,#68906); +#68905 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#68906 = VECTOR('',#68907,1.); +#68907 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#68908 = ORIENTED_EDGE('',*,*,#67934,.F.); +#68909 = ORIENTED_EDGE('',*,*,#68910,.T.); +#68910 = EDGE_CURVE('',#67935,#68911,#68913,.T.); +#68911 = VERTEX_POINT('',#68912); +#68912 = CARTESIAN_POINT('',(7.445,-5.56,0.19)); +#68913 = LINE('',#68914,#68915); +#68914 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#68915 = VECTOR('',#68916,1.); +#68916 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#68917 = ORIENTED_EDGE('',*,*,#68918,.T.); +#68918 = EDGE_CURVE('',#68911,#68919,#68921,.T.); +#68919 = VERTEX_POINT('',#68920); +#68920 = CARTESIAN_POINT('',(7.445,-5.36,-1.E-02)); +#68921 = CIRCLE('',#68922,0.2); +#68922 = AXIS2_PLACEMENT_3D('',#68923,#68924,#68925); +#68923 = CARTESIAN_POINT('',(7.445,-5.36,0.19)); +#68924 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#68925 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#68926 = ORIENTED_EDGE('',*,*,#68927,.F.); +#68927 = EDGE_CURVE('',#68928,#68919,#68930,.T.); +#68928 = VERTEX_POINT('',#68929); +#68929 = CARTESIAN_POINT('',(7.445,-5.21,-1.E-02)); +#68930 = LINE('',#68931,#68932); +#68931 = CARTESIAN_POINT('',(7.445,-5.56,-1.E-02)); +#68932 = VECTOR('',#68933,1.); +#68933 = DIRECTION('',(0.,-1.,3.3E-16)); +#68934 = ORIENTED_EDGE('',*,*,#68935,.F.); +#68935 = EDGE_CURVE('',#68936,#68928,#68938,.T.); +#68936 = VERTEX_POINT('',#68937); +#68937 = CARTESIAN_POINT('',(7.445,-5.067355715851,7.23557158515E-02)); +#68938 = CIRCLE('',#68939,0.164711431703); +#68939 = AXIS2_PLACEMENT_3D('',#68940,#68941,#68942); +#68940 = CARTESIAN_POINT('',(7.445,-5.21,0.154711431703)); +#68941 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#68942 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68943 = ORIENTED_EDGE('',*,*,#68944,.T.); +#68944 = EDGE_CURVE('',#68936,#68945,#68947,.T.); +#68945 = VERTEX_POINT('',#68946); +#68946 = CARTESIAN_POINT('',(7.445,-4.76,-1.E-02)); +#68947 = CIRCLE('',#68948,0.164711431703); +#68948 = AXIS2_PLACEMENT_3D('',#68949,#68950,#68951); +#68949 = CARTESIAN_POINT('',(7.445,-4.924711431703,-1.E-02)); +#68950 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#68951 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#68952 = ORIENTED_EDGE('',*,*,#68953,.T.); +#68953 = EDGE_CURVE('',#68945,#68954,#68956,.T.); +#68954 = VERTEX_POINT('',#68955); +#68955 = CARTESIAN_POINT('',(7.445,-4.76,-0.61)); +#68956 = LINE('',#68957,#68958); +#68957 = CARTESIAN_POINT('',(7.445,-4.76,0.4025)); +#68958 = VECTOR('',#68959,1.); +#68959 = DIRECTION('',(2.8E-16,-3.3E-16,-1.)); +#68960 = ORIENTED_EDGE('',*,*,#68961,.F.); +#68961 = EDGE_CURVE('',#68962,#68954,#68964,.T.); +#68962 = VERTEX_POINT('',#68963); +#68963 = CARTESIAN_POINT('',(7.445,-4.56,-0.81)); +#68964 = CIRCLE('',#68965,0.2); +#68965 = AXIS2_PLACEMENT_3D('',#68966,#68967,#68968); +#68966 = CARTESIAN_POINT('',(7.445,-4.56,-0.61)); +#68967 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#68968 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#68969 = ORIENTED_EDGE('',*,*,#68970,.T.); +#68970 = EDGE_CURVE('',#68962,#68971,#68973,.T.); +#68971 = VERTEX_POINT('',#68972); +#68972 = CARTESIAN_POINT('',(7.445,-4.16,-0.81)); +#68973 = LINE('',#68974,#68975); +#68974 = CARTESIAN_POINT('',(7.445,-4.76,-0.81)); +#68975 = VECTOR('',#68976,1.); +#68976 = DIRECTION('',(0.,1.,-3.3E-16)); +#68977 = ORIENTED_EDGE('',*,*,#68978,.F.); +#68978 = EDGE_CURVE('',#68902,#68971,#68979,.T.); +#68979 = CIRCLE('',#68980,0.2); +#68980 = AXIS2_PLACEMENT_3D('',#68981,#68982,#68983); +#68981 = CARTESIAN_POINT('',(7.445,-4.16,-0.61)); +#68982 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#68983 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#68984 = PLANE('',#68985); +#68985 = AXIS2_PLACEMENT_3D('',#68986,#68987,#68988); +#68986 = CARTESIAN_POINT('',(7.445,-5.56,1.615)); +#68987 = DIRECTION('',(1.,0.,2.8E-16)); +#68988 = DIRECTION('',(1.232E-31,1.,-4.4E-16)); +#68989 = ADVANCED_FACE('',(#68990),#69057,.T.); +#68990 = FACE_BOUND('',#68991,.T.); +#68991 = EDGE_LOOP('',(#68992,#69002,#69010,#69018,#69024,#69025,#69033, + #69042,#69050)); +#68992 = ORIENTED_EDGE('',*,*,#68993,.F.); +#68993 = EDGE_CURVE('',#68994,#68996,#68998,.T.); +#68994 = VERTEX_POINT('',#68995); +#68995 = CARTESIAN_POINT('',(7.445,-0.23,0.885)); +#68996 = VERTEX_POINT('',#68997); +#68997 = CARTESIAN_POINT('',(7.445,-0.23,-1.91)); +#68998 = LINE('',#68999,#69000); +#68999 = CARTESIAN_POINT('',(7.445,-0.23,1.615)); +#69000 = VECTOR('',#69001,1.); +#69001 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69002 = ORIENTED_EDGE('',*,*,#69003,.F.); +#69003 = EDGE_CURVE('',#69004,#68994,#69006,.T.); +#69004 = VERTEX_POINT('',#69005); +#69005 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#69006 = LINE('',#69007,#69008); +#69007 = CARTESIAN_POINT('',(7.445,-0.23,1.615)); +#69008 = VECTOR('',#69009,1.); +#69009 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69010 = ORIENTED_EDGE('',*,*,#69011,.F.); +#69011 = EDGE_CURVE('',#69012,#69004,#69014,.T.); +#69012 = VERTEX_POINT('',#69013); +#69013 = CARTESIAN_POINT('',(7.445,-0.63,1.285)); +#69014 = LINE('',#69015,#69016); +#69015 = CARTESIAN_POINT('',(7.445,-1.73,1.285)); +#69016 = VECTOR('',#69017,1.); +#69017 = DIRECTION('',(2.8E-16,1.,-2.2E-16)); +#69018 = ORIENTED_EDGE('',*,*,#69019,.F.); +#69019 = EDGE_CURVE('',#67902,#69012,#69020,.T.); +#69020 = LINE('',#69021,#69022); +#69021 = CARTESIAN_POINT('',(7.445,-0.63,1.615)); +#69022 = VECTOR('',#69023,1.); +#69023 = DIRECTION('',(0.,-6.7E-16,-1.)); +#69024 = ORIENTED_EDGE('',*,*,#67909,.F.); +#69025 = ORIENTED_EDGE('',*,*,#69026,.T.); +#69026 = EDGE_CURVE('',#67910,#69027,#69029,.T.); +#69027 = VERTEX_POINT('',#69028); +#69028 = CARTESIAN_POINT('',(7.445,-1.73,-1.91)); +#69029 = LINE('',#69030,#69031); +#69030 = CARTESIAN_POINT('',(7.445,-1.73,1.615)); +#69031 = VECTOR('',#69032,1.); +#69032 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69033 = ORIENTED_EDGE('',*,*,#69034,.T.); +#69034 = EDGE_CURVE('',#69027,#69035,#69037,.T.); +#69035 = VERTEX_POINT('',#69036); +#69036 = CARTESIAN_POINT('',(7.445,-1.53,-2.11)); +#69037 = CIRCLE('',#69038,0.2); +#69038 = AXIS2_PLACEMENT_3D('',#69039,#69040,#69041); +#69039 = CARTESIAN_POINT('',(7.445,-1.53,-1.91)); +#69040 = DIRECTION('',(1.,0.,2.8E-16)); +#69041 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69042 = ORIENTED_EDGE('',*,*,#69043,.T.); +#69043 = EDGE_CURVE('',#69035,#69044,#69046,.T.); +#69044 = VERTEX_POINT('',#69045); +#69045 = CARTESIAN_POINT('',(7.445,-0.43,-2.11)); +#69046 = LINE('',#69047,#69048); +#69047 = CARTESIAN_POINT('',(7.445,-1.73,-2.11)); +#69048 = VECTOR('',#69049,1.); +#69049 = DIRECTION('',(2.8E-16,1.,-2.2E-16)); +#69050 = ORIENTED_EDGE('',*,*,#69051,.F.); +#69051 = EDGE_CURVE('',#68996,#69044,#69052,.T.); +#69052 = CIRCLE('',#69053,0.2); +#69053 = AXIS2_PLACEMENT_3D('',#69054,#69055,#69056); +#69054 = CARTESIAN_POINT('',(7.445,-0.43,-1.91)); +#69055 = DIRECTION('',(-1.,0.,-2.8E-16)); +#69056 = DIRECTION('',(2.8E-16,-2.2E-16,-1.)); +#69057 = PLANE('',#69058); +#69058 = AXIS2_PLACEMENT_3D('',#69059,#69060,#69061); +#69059 = CARTESIAN_POINT('',(7.445,-1.73,1.615)); +#69060 = DIRECTION('',(1.,0.,2.8E-16)); +#69061 = DIRECTION('',(1.232E-31,1.,-4.4E-16)); +#69062 = ADVANCED_FACE('',(#69063),#69079,.F.); +#69063 = FACE_BOUND('',#69064,.F.); +#69064 = EDGE_LOOP('',(#69065,#69066,#69072,#69073)); +#69065 = ORIENTED_EDGE('',*,*,#68230,.F.); +#69066 = ORIENTED_EDGE('',*,*,#69067,.T.); +#69067 = EDGE_CURVE('',#68231,#67902,#69068,.T.); +#69068 = LINE('',#69069,#69070); +#69069 = CARTESIAN_POINT('',(5.175,-0.63,1.615)); +#69070 = VECTOR('',#69071,1.); +#69071 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69072 = ORIENTED_EDGE('',*,*,#67901,.T.); +#69073 = ORIENTED_EDGE('',*,*,#69074,.F.); +#69074 = EDGE_CURVE('',#68223,#67894,#69075,.T.); +#69075 = LINE('',#69076,#69077); +#69076 = CARTESIAN_POINT('',(5.175,-0.63,1.87)); +#69077 = VECTOR('',#69078,1.); +#69078 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69079 = PLANE('',#69080); +#69080 = AXIS2_PLACEMENT_3D('',#69081,#69082,#69083); +#69081 = CARTESIAN_POINT('',(5.175,-0.63,1.615)); +#69082 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#69083 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#69084 = ADVANCED_FACE('',(#69085),#69091,.F.); +#69085 = FACE_BOUND('',#69086,.F.); +#69086 = EDGE_LOOP('',(#69087,#69088,#69089,#69090)); +#69087 = ORIENTED_EDGE('',*,*,#68222,.F.); +#69088 = ORIENTED_EDGE('',*,*,#69074,.T.); +#69089 = ORIENTED_EDGE('',*,*,#67893,.T.); +#69090 = ORIENTED_EDGE('',*,*,#68676,.F.); +#69091 = PLANE('',#69092); +#69092 = AXIS2_PLACEMENT_3D('',#69093,#69094,#69095); +#69093 = CARTESIAN_POINT('',(5.175,-0.63,1.87)); +#69094 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#69095 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69096 = ADVANCED_FACE('',(#69097),#69164,.T.); +#69097 = FACE_BOUND('',#69098,.F.); +#69098 = EDGE_LOOP('',(#69099,#69107,#69108,#69116,#69124,#69132,#69140, + #69149,#69157)); +#69099 = ORIENTED_EDGE('',*,*,#69100,.F.); +#69100 = EDGE_CURVE('',#68071,#69101,#69103,.T.); +#69101 = VERTEX_POINT('',#69102); +#69102 = CARTESIAN_POINT('',(-1.195,-1.73,-1.91)); +#69103 = LINE('',#69104,#69105); +#69104 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#69105 = VECTOR('',#69106,1.); +#69106 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69107 = ORIENTED_EDGE('',*,*,#68078,.T.); +#69108 = ORIENTED_EDGE('',*,*,#69109,.T.); +#69109 = EDGE_CURVE('',#68079,#69110,#69112,.T.); +#69110 = VERTEX_POINT('',#69111); +#69111 = CARTESIAN_POINT('',(-1.195,-0.63,1.285)); +#69112 = LINE('',#69113,#69114); +#69113 = CARTESIAN_POINT('',(-1.195,-0.63,1.615)); +#69114 = VECTOR('',#69115,1.); +#69115 = DIRECTION('',(2.2E-16,-6.7E-16,-1.)); +#69116 = ORIENTED_EDGE('',*,*,#69117,.F.); +#69117 = EDGE_CURVE('',#69118,#69110,#69120,.T.); +#69118 = VERTEX_POINT('',#69119); +#69119 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#69120 = LINE('',#69121,#69122); +#69121 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#69122 = VECTOR('',#69123,1.); +#69123 = DIRECTION('',(-5.E-16,-1.,2.2E-16)); +#69124 = ORIENTED_EDGE('',*,*,#69125,.T.); +#69125 = EDGE_CURVE('',#69118,#69126,#69128,.T.); +#69126 = VERTEX_POINT('',#69127); +#69127 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#69128 = LINE('',#69129,#69130); +#69129 = CARTESIAN_POINT('',(-1.195,-0.23,1.615)); +#69130 = VECTOR('',#69131,1.); +#69131 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69132 = ORIENTED_EDGE('',*,*,#69133,.T.); +#69133 = EDGE_CURVE('',#69126,#69134,#69136,.T.); +#69134 = VERTEX_POINT('',#69135); +#69135 = CARTESIAN_POINT('',(-1.195,-0.23,-1.91)); +#69136 = LINE('',#69137,#69138); +#69137 = CARTESIAN_POINT('',(-1.195,-0.23,1.615)); +#69138 = VECTOR('',#69139,1.); +#69139 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69140 = ORIENTED_EDGE('',*,*,#69141,.T.); +#69141 = EDGE_CURVE('',#69134,#69142,#69144,.T.); +#69142 = VERTEX_POINT('',#69143); +#69143 = CARTESIAN_POINT('',(-1.195,-0.43,-2.11)); +#69144 = CIRCLE('',#69145,0.2); +#69145 = AXIS2_PLACEMENT_3D('',#69146,#69147,#69148); +#69146 = CARTESIAN_POINT('',(-1.195,-0.43,-1.91)); +#69147 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69148 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#69149 = ORIENTED_EDGE('',*,*,#69150,.T.); +#69150 = EDGE_CURVE('',#69142,#69151,#69153,.T.); +#69151 = VERTEX_POINT('',#69152); +#69152 = CARTESIAN_POINT('',(-1.195,-1.53,-2.11)); +#69153 = LINE('',#69154,#69155); +#69154 = CARTESIAN_POINT('',(-1.195,-0.23,-2.11)); +#69155 = VECTOR('',#69156,1.); +#69156 = DIRECTION('',(-5.E-16,-1.,2.2E-16)); +#69157 = ORIENTED_EDGE('',*,*,#69158,.F.); +#69158 = EDGE_CURVE('',#69101,#69151,#69159,.T.); +#69159 = CIRCLE('',#69160,0.2); +#69160 = AXIS2_PLACEMENT_3D('',#69161,#69162,#69163); +#69161 = CARTESIAN_POINT('',(-1.195,-1.53,-1.91)); +#69162 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69163 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69164 = PLANE('',#69165); +#69165 = AXIS2_PLACEMENT_3D('',#69166,#69167,#69168); +#69166 = CARTESIAN_POINT('',(-1.195,-0.23,1.615)); +#69167 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69168 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69169 = ADVANCED_FACE('',(#69170),#69256,.T.); +#69170 = FACE_BOUND('',#69171,.F.); +#69171 = EDGE_LOOP('',(#69172,#69180,#69181,#69189,#69198,#69206,#69215, + #69223,#69232,#69241,#69249)); +#69172 = ORIENTED_EDGE('',*,*,#69173,.F.); +#69173 = EDGE_CURVE('',#68041,#69174,#69176,.T.); +#69174 = VERTEX_POINT('',#69175); +#69175 = CARTESIAN_POINT('',(-1.195,-5.56,0.19)); +#69176 = LINE('',#69177,#69178); +#69177 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#69178 = VECTOR('',#69179,1.); +#69179 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69180 = ORIENTED_EDGE('',*,*,#68048,.F.); +#69181 = ORIENTED_EDGE('',*,*,#69182,.T.); +#69182 = EDGE_CURVE('',#68049,#69183,#69185,.T.); +#69183 = VERTEX_POINT('',#69184); +#69184 = CARTESIAN_POINT('',(-1.195,-3.96,-0.61)); +#69185 = LINE('',#69186,#69187); +#69186 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#69187 = VECTOR('',#69188,1.); +#69188 = DIRECTION('',(-6.E-17,-4.4E-16,-1.)); +#69189 = ORIENTED_EDGE('',*,*,#69190,.T.); +#69190 = EDGE_CURVE('',#69183,#69191,#69193,.T.); +#69191 = VERTEX_POINT('',#69192); +#69192 = CARTESIAN_POINT('',(-1.195,-4.16,-0.81)); +#69193 = CIRCLE('',#69194,0.2); +#69194 = AXIS2_PLACEMENT_3D('',#69195,#69196,#69197); +#69195 = CARTESIAN_POINT('',(-1.195,-4.16,-0.61)); +#69196 = DIRECTION('',(-1.,0.,6.E-17)); +#69197 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69198 = ORIENTED_EDGE('',*,*,#69199,.F.); +#69199 = EDGE_CURVE('',#69200,#69191,#69202,.T.); +#69200 = VERTEX_POINT('',#69201); +#69201 = CARTESIAN_POINT('',(-1.195,-4.56,-0.81)); +#69202 = LINE('',#69203,#69204); +#69203 = CARTESIAN_POINT('',(-1.195,-3.96,-0.81)); +#69204 = VECTOR('',#69205,1.); +#69205 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69206 = ORIENTED_EDGE('',*,*,#69207,.T.); +#69207 = EDGE_CURVE('',#69200,#69208,#69210,.T.); +#69208 = VERTEX_POINT('',#69209); +#69209 = CARTESIAN_POINT('',(-1.195,-4.76,-0.61)); +#69210 = CIRCLE('',#69211,0.2); +#69211 = AXIS2_PLACEMENT_3D('',#69212,#69213,#69214); +#69212 = CARTESIAN_POINT('',(-1.195,-4.56,-0.61)); +#69213 = DIRECTION('',(-1.,0.,6.E-17)); +#69214 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69215 = ORIENTED_EDGE('',*,*,#69216,.F.); +#69216 = EDGE_CURVE('',#69217,#69208,#69219,.T.); +#69217 = VERTEX_POINT('',#69218); +#69218 = CARTESIAN_POINT('',(-1.195,-4.76,-1.E-02)); +#69219 = LINE('',#69220,#69221); +#69220 = CARTESIAN_POINT('',(-1.195,-4.76,0.4025)); +#69221 = VECTOR('',#69222,1.); +#69222 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69223 = ORIENTED_EDGE('',*,*,#69224,.T.); +#69224 = EDGE_CURVE('',#69217,#69225,#69227,.T.); +#69225 = VERTEX_POINT('',#69226); +#69226 = CARTESIAN_POINT('',(-1.195,-5.067355715851,7.23557158515E-02)); +#69227 = CIRCLE('',#69228,0.164711431703); +#69228 = AXIS2_PLACEMENT_3D('',#69229,#69230,#69231); +#69229 = CARTESIAN_POINT('',(-1.195,-4.924711431703,-1.E-02)); +#69230 = DIRECTION('',(1.,-0.,0.)); +#69231 = DIRECTION('',(0.,1.,-2.2E-16)); +#69232 = ORIENTED_EDGE('',*,*,#69233,.F.); +#69233 = EDGE_CURVE('',#69234,#69225,#69236,.T.); +#69234 = VERTEX_POINT('',#69235); +#69235 = CARTESIAN_POINT('',(-1.195,-5.21,-1.E-02)); +#69236 = CIRCLE('',#69237,0.164711431703); +#69237 = AXIS2_PLACEMENT_3D('',#69238,#69239,#69240); +#69238 = CARTESIAN_POINT('',(-1.195,-5.21,0.154711431703)); +#69239 = DIRECTION('',(1.,-0.,0.)); +#69240 = DIRECTION('',(0.,1.,-2.2E-16)); +#69241 = ORIENTED_EDGE('',*,*,#69242,.T.); +#69242 = EDGE_CURVE('',#69234,#69243,#69245,.T.); +#69243 = VERTEX_POINT('',#69244); +#69244 = CARTESIAN_POINT('',(-1.195,-5.36,-1.E-02)); +#69245 = LINE('',#69246,#69247); +#69246 = CARTESIAN_POINT('',(-1.195,-4.76,-1.E-02)); +#69247 = VECTOR('',#69248,1.); +#69248 = DIRECTION('',(-2.2E-16,-1.,2.2E-16)); +#69249 = ORIENTED_EDGE('',*,*,#69250,.F.); +#69250 = EDGE_CURVE('',#69174,#69243,#69251,.T.); +#69251 = CIRCLE('',#69252,0.2); +#69252 = AXIS2_PLACEMENT_3D('',#69253,#69254,#69255); +#69253 = CARTESIAN_POINT('',(-1.195,-5.36,0.19)); +#69254 = DIRECTION('',(1.,0.,-6.E-17)); +#69255 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69256 = PLANE('',#69257); +#69257 = AXIS2_PLACEMENT_3D('',#69258,#69259,#69260); +#69258 = CARTESIAN_POINT('',(-1.195,-3.96,1.615)); +#69259 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69260 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69261 = ADVANCED_FACE('',(#69262),#69273,.F.); +#69262 = FACE_BOUND('',#69263,.F.); +#69263 = EDGE_LOOP('',(#69264,#69265,#69266,#69267)); +#69264 = ORIENTED_EDGE('',*,*,#68599,.T.); +#69265 = ORIENTED_EDGE('',*,*,#68162,.T.); +#69266 = ORIENTED_EDGE('',*,*,#68485,.F.); +#69267 = ORIENTED_EDGE('',*,*,#69268,.F.); +#69268 = EDGE_CURVE('',#68600,#68486,#69269,.T.); +#69269 = LINE('',#69270,#69271); +#69270 = CARTESIAN_POINT('',(1.790654565435,-5.435,0.613423053241)); +#69271 = VECTOR('',#69272,1.); +#69272 = DIRECTION('',(7.2E-16,1.,-9.7E-16)); +#69273 = CYLINDRICAL_SURFACE('',#69274,0.25); +#69274 = AXIS2_PLACEMENT_3D('',#69275,#69276,#69277); +#69275 = CARTESIAN_POINT('',(1.685,-5.435,0.84)); +#69276 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69277 = DIRECTION('',(-1.,2.2E-16,-3.77E-15)); +#69278 = ADVANCED_FACE('',(#69279),#69290,.F.); +#69279 = FACE_BOUND('',#69280,.F.); +#69280 = EDGE_LOOP('',(#69281,#69287,#69288,#69289)); +#69281 = ORIENTED_EDGE('',*,*,#69282,.T.); +#69282 = EDGE_CURVE('',#68544,#68461,#69283,.T.); +#69283 = LINE('',#69284,#69285); +#69284 = CARTESIAN_POINT('',(4.159345434565,-5.435,0.613423053241)); +#69285 = VECTOR('',#69286,1.); +#69286 = DIRECTION('',(-5.E-16,1.,-9.7E-16)); +#69287 = ORIENTED_EDGE('',*,*,#68460,.T.); +#69288 = ORIENTED_EDGE('',*,*,#68152,.F.); +#69289 = ORIENTED_EDGE('',*,*,#68543,.F.); +#69290 = CYLINDRICAL_SURFACE('',#69291,0.25); +#69291 = AXIS2_PLACEMENT_3D('',#69292,#69293,#69294); +#69292 = CARTESIAN_POINT('',(4.265,-5.435,0.84)); +#69293 = DIRECTION('',(0.,1.,-2.2E-16)); +#69294 = DIRECTION('',(1.,-7.81E-31,-3.55E-15)); +#69295 = ADVANCED_FACE('',(#69296),#69382,.T.); +#69296 = FACE_BOUND('',#69297,.T.); +#69297 = EDGE_LOOP('',(#69298,#69306,#69307,#69315,#69324,#69332,#69341, + #69349,#69358,#69367,#69375)); +#69298 = ORIENTED_EDGE('',*,*,#69299,.F.); +#69299 = EDGE_CURVE('',#68269,#69300,#69302,.T.); +#69300 = VERTEX_POINT('',#69301); +#69301 = CARTESIAN_POINT('',(7.145,-5.56,0.19)); +#69302 = LINE('',#69303,#69304); +#69303 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#69304 = VECTOR('',#69305,1.); +#69305 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69306 = ORIENTED_EDGE('',*,*,#68268,.F.); +#69307 = ORIENTED_EDGE('',*,*,#69308,.T.); +#69308 = EDGE_CURVE('',#68261,#69309,#69311,.T.); +#69309 = VERTEX_POINT('',#69310); +#69310 = CARTESIAN_POINT('',(7.145,-3.96,-0.61)); +#69311 = LINE('',#69312,#69313); +#69312 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#69313 = VECTOR('',#69314,1.); +#69314 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69315 = ORIENTED_EDGE('',*,*,#69316,.T.); +#69316 = EDGE_CURVE('',#69309,#69317,#69319,.T.); +#69317 = VERTEX_POINT('',#69318); +#69318 = CARTESIAN_POINT('',(7.145,-4.16,-0.81)); +#69319 = CIRCLE('',#69320,0.2); +#69320 = AXIS2_PLACEMENT_3D('',#69321,#69322,#69323); +#69321 = CARTESIAN_POINT('',(7.145,-4.16,-0.61)); +#69322 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#69323 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69324 = ORIENTED_EDGE('',*,*,#69325,.T.); +#69325 = EDGE_CURVE('',#69317,#69326,#69328,.T.); +#69326 = VERTEX_POINT('',#69327); +#69327 = CARTESIAN_POINT('',(7.145,-4.56,-0.81)); +#69328 = LINE('',#69329,#69330); +#69329 = CARTESIAN_POINT('',(7.145,-3.96,-0.81)); +#69330 = VECTOR('',#69331,1.); +#69331 = DIRECTION('',(0.,-1.,3.3E-16)); +#69332 = ORIENTED_EDGE('',*,*,#69333,.T.); +#69333 = EDGE_CURVE('',#69326,#69334,#69336,.T.); +#69334 = VERTEX_POINT('',#69335); +#69335 = CARTESIAN_POINT('',(7.145,-4.76,-0.61)); +#69336 = CIRCLE('',#69337,0.2); +#69337 = AXIS2_PLACEMENT_3D('',#69338,#69339,#69340); +#69338 = CARTESIAN_POINT('',(7.145,-4.56,-0.61)); +#69339 = DIRECTION('',(-1.,2.2E-16,-2.8E-16)); +#69340 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69341 = ORIENTED_EDGE('',*,*,#69342,.T.); +#69342 = EDGE_CURVE('',#69334,#69343,#69345,.T.); +#69343 = VERTEX_POINT('',#69344); +#69344 = CARTESIAN_POINT('',(7.145,-4.76,-1.E-02)); +#69345 = LINE('',#69346,#69347); +#69346 = CARTESIAN_POINT('',(7.145,-4.76,0.4025)); +#69347 = VECTOR('',#69348,1.); +#69348 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#69349 = ORIENTED_EDGE('',*,*,#69350,.F.); +#69350 = EDGE_CURVE('',#69351,#69343,#69353,.T.); +#69351 = VERTEX_POINT('',#69352); +#69352 = CARTESIAN_POINT('',(7.145,-5.067355715851,7.23557158515E-02)); +#69353 = CIRCLE('',#69354,0.164711431703); +#69354 = AXIS2_PLACEMENT_3D('',#69355,#69356,#69357); +#69355 = CARTESIAN_POINT('',(7.145,-4.924711431703,-1.E-02)); +#69356 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#69357 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69358 = ORIENTED_EDGE('',*,*,#69359,.T.); +#69359 = EDGE_CURVE('',#69351,#69360,#69362,.T.); +#69360 = VERTEX_POINT('',#69361); +#69361 = CARTESIAN_POINT('',(7.145,-5.21,-1.E-02)); +#69362 = CIRCLE('',#69363,0.164711431703); +#69363 = AXIS2_PLACEMENT_3D('',#69364,#69365,#69366); +#69364 = CARTESIAN_POINT('',(7.145,-5.21,0.154711431703)); +#69365 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#69366 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69367 = ORIENTED_EDGE('',*,*,#69368,.F.); +#69368 = EDGE_CURVE('',#69369,#69360,#69371,.T.); +#69369 = VERTEX_POINT('',#69370); +#69370 = CARTESIAN_POINT('',(7.145,-5.36,-1.E-02)); +#69371 = LINE('',#69372,#69373); +#69372 = CARTESIAN_POINT('',(7.145,-4.76,-1.E-02)); +#69373 = VECTOR('',#69374,1.); +#69374 = DIRECTION('',(0.,1.,-3.3E-16)); +#69375 = ORIENTED_EDGE('',*,*,#69376,.F.); +#69376 = EDGE_CURVE('',#69300,#69369,#69377,.T.); +#69377 = CIRCLE('',#69378,0.2); +#69378 = AXIS2_PLACEMENT_3D('',#69379,#69380,#69381); +#69379 = CARTESIAN_POINT('',(7.145,-5.36,0.19)); +#69380 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69381 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69382 = PLANE('',#69383); +#69383 = AXIS2_PLACEMENT_3D('',#69384,#69385,#69386); +#69384 = CARTESIAN_POINT('',(7.145,-3.96,1.615)); +#69385 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#69386 = DIRECTION('',(-1.232E-31,-1.,4.4E-16)); +#69387 = ADVANCED_FACE('',(#69388),#69455,.T.); +#69388 = FACE_BOUND('',#69389,.T.); +#69389 = EDGE_LOOP('',(#69390,#69398,#69399,#69407,#69415,#69423,#69431, + #69440,#69448)); +#69390 = ORIENTED_EDGE('',*,*,#69391,.F.); +#69391 = EDGE_CURVE('',#68239,#69392,#69394,.T.); +#69392 = VERTEX_POINT('',#69393); +#69393 = CARTESIAN_POINT('',(7.145,-1.73,-1.91)); +#69394 = LINE('',#69395,#69396); +#69395 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#69396 = VECTOR('',#69397,1.); +#69397 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69398 = ORIENTED_EDGE('',*,*,#68238,.T.); +#69399 = ORIENTED_EDGE('',*,*,#69400,.T.); +#69400 = EDGE_CURVE('',#68231,#69401,#69403,.T.); +#69401 = VERTEX_POINT('',#69402); +#69402 = CARTESIAN_POINT('',(7.145,-0.63,1.285)); +#69403 = LINE('',#69404,#69405); +#69404 = CARTESIAN_POINT('',(7.145,-0.63,1.615)); +#69405 = VECTOR('',#69406,1.); +#69406 = DIRECTION('',(0.,-6.7E-16,-1.)); +#69407 = ORIENTED_EDGE('',*,*,#69408,.F.); +#69408 = EDGE_CURVE('',#69409,#69401,#69411,.T.); +#69409 = VERTEX_POINT('',#69410); +#69410 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#69411 = LINE('',#69412,#69413); +#69412 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#69413 = VECTOR('',#69414,1.); +#69414 = DIRECTION('',(-2.8E-16,-1.,2.2E-16)); +#69415 = ORIENTED_EDGE('',*,*,#69416,.T.); +#69416 = EDGE_CURVE('',#69409,#69417,#69419,.T.); +#69417 = VERTEX_POINT('',#69418); +#69418 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#69419 = LINE('',#69420,#69421); +#69420 = CARTESIAN_POINT('',(7.145,-0.23,1.615)); +#69421 = VECTOR('',#69422,1.); +#69422 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69423 = ORIENTED_EDGE('',*,*,#69424,.T.); +#69424 = EDGE_CURVE('',#69417,#69425,#69427,.T.); +#69425 = VERTEX_POINT('',#69426); +#69426 = CARTESIAN_POINT('',(7.145,-0.23,-1.91)); +#69427 = LINE('',#69428,#69429); +#69428 = CARTESIAN_POINT('',(7.145,-0.23,1.615)); +#69429 = VECTOR('',#69430,1.); +#69430 = DIRECTION('',(2.8E-16,-4.4E-16,-1.)); +#69431 = ORIENTED_EDGE('',*,*,#69432,.T.); +#69432 = EDGE_CURVE('',#69425,#69433,#69435,.T.); +#69433 = VERTEX_POINT('',#69434); +#69434 = CARTESIAN_POINT('',(7.145,-0.43,-2.11)); +#69435 = CIRCLE('',#69436,0.2); +#69436 = AXIS2_PLACEMENT_3D('',#69437,#69438,#69439); +#69437 = CARTESIAN_POINT('',(7.145,-0.43,-1.91)); +#69438 = DIRECTION('',(-1.,0.,-2.8E-16)); +#69439 = DIRECTION('',(2.8E-16,-2.2E-16,-1.)); +#69440 = ORIENTED_EDGE('',*,*,#69441,.T.); +#69441 = EDGE_CURVE('',#69433,#69442,#69444,.T.); +#69442 = VERTEX_POINT('',#69443); +#69443 = CARTESIAN_POINT('',(7.145,-1.53,-2.11)); +#69444 = LINE('',#69445,#69446); +#69445 = CARTESIAN_POINT('',(7.145,-0.23,-2.11)); +#69446 = VECTOR('',#69447,1.); +#69447 = DIRECTION('',(-2.8E-16,-1.,2.2E-16)); +#69448 = ORIENTED_EDGE('',*,*,#69449,.F.); +#69449 = EDGE_CURVE('',#69392,#69442,#69450,.T.); +#69450 = CIRCLE('',#69451,0.2); +#69451 = AXIS2_PLACEMENT_3D('',#69452,#69453,#69454); +#69452 = CARTESIAN_POINT('',(7.145,-1.53,-1.91)); +#69453 = DIRECTION('',(1.,0.,2.8E-16)); +#69454 = DIRECTION('',(-2.8E-16,2.2E-16,1.)); +#69455 = PLANE('',#69456); +#69456 = AXIS2_PLACEMENT_3D('',#69457,#69458,#69459); +#69457 = CARTESIAN_POINT('',(7.145,-0.23,1.615)); +#69458 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#69459 = DIRECTION('',(-1.232E-31,-1.,4.4E-16)); +#69460 = ADVANCED_FACE('',(#69461),#69472,.T.); +#69461 = FACE_BOUND('',#69462,.T.); +#69462 = EDGE_LOOP('',(#69463,#69464,#69465,#69466)); +#69463 = ORIENTED_EDGE('',*,*,#68910,.F.); +#69464 = ORIENTED_EDGE('',*,*,#68337,.F.); +#69465 = ORIENTED_EDGE('',*,*,#69299,.T.); +#69466 = ORIENTED_EDGE('',*,*,#69467,.T.); +#69467 = EDGE_CURVE('',#69300,#68911,#69468,.T.); +#69468 = LINE('',#69469,#69470); +#69469 = CARTESIAN_POINT('',(7.145,-5.56,0.19)); +#69470 = VECTOR('',#69471,1.); +#69471 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69472 = PLANE('',#69473); +#69473 = AXIS2_PLACEMENT_3D('',#69474,#69475,#69476); +#69474 = CARTESIAN_POINT('',(7.145,-5.56,1.615)); +#69475 = DIRECTION('',(0.,-1.,4.4E-16)); +#69476 = DIRECTION('',(1.,1.232E-31,2.8E-16)); +#69477 = ADVANCED_FACE('',(#69478),#69489,.T.); +#69478 = FACE_BOUND('',#69479,.F.); +#69479 = EDGE_LOOP('',(#69480,#69481,#69482,#69483)); +#69480 = ORIENTED_EDGE('',*,*,#68818,.F.); +#69481 = ORIENTED_EDGE('',*,*,#68354,.F.); +#69482 = ORIENTED_EDGE('',*,*,#69173,.T.); +#69483 = ORIENTED_EDGE('',*,*,#69484,.T.); +#69484 = EDGE_CURVE('',#69174,#68819,#69485,.T.); +#69485 = LINE('',#69486,#69487); +#69486 = CARTESIAN_POINT('',(-1.195,-5.56,0.19)); +#69487 = VECTOR('',#69488,1.); +#69488 = DIRECTION('',(-1.,0.,6.E-17)); +#69489 = PLANE('',#69490); +#69490 = AXIS2_PLACEMENT_3D('',#69491,#69492,#69493); +#69491 = CARTESIAN_POINT('',(-1.195,-5.56,1.615)); +#69492 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#69493 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69494 = ADVANCED_FACE('',(#69495),#69506,.T.); +#69495 = FACE_BOUND('',#69496,.T.); +#69496 = EDGE_LOOP('',(#69497,#69498,#69499,#69500)); +#69497 = ORIENTED_EDGE('',*,*,#69308,.F.); +#69498 = ORIENTED_EDGE('',*,*,#68381,.F.); +#69499 = ORIENTED_EDGE('',*,*,#68901,.T.); +#69500 = ORIENTED_EDGE('',*,*,#69501,.F.); +#69501 = EDGE_CURVE('',#69309,#68902,#69502,.T.); +#69502 = LINE('',#69503,#69504); +#69503 = CARTESIAN_POINT('',(7.145,-3.96,-0.61)); +#69504 = VECTOR('',#69505,1.); +#69505 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#69506 = PLANE('',#69507); +#69507 = AXIS2_PLACEMENT_3D('',#69508,#69509,#69510); +#69508 = CARTESIAN_POINT('',(7.445,-3.96,1.615)); +#69509 = DIRECTION('',(0.,1.,-4.4E-16)); +#69510 = DIRECTION('',(-1.,-1.232E-31,-2.8E-16)); +#69511 = ADVANCED_FACE('',(#69512),#69523,.T.); +#69512 = FACE_BOUND('',#69513,.F.); +#69513 = EDGE_LOOP('',(#69514,#69515,#69516,#69517)); +#69514 = ORIENTED_EDGE('',*,*,#69182,.F.); +#69515 = ORIENTED_EDGE('',*,*,#68410,.F.); +#69516 = ORIENTED_EDGE('',*,*,#68809,.T.); +#69517 = ORIENTED_EDGE('',*,*,#69518,.F.); +#69518 = EDGE_CURVE('',#69183,#68810,#69519,.T.); +#69519 = LINE('',#69520,#69521); +#69520 = CARTESIAN_POINT('',(-1.195,-3.96,-0.61)); +#69521 = VECTOR('',#69522,1.); +#69522 = DIRECTION('',(-1.,0.,6.E-17)); +#69523 = PLANE('',#69524); +#69524 = AXIS2_PLACEMENT_3D('',#69525,#69526,#69527); +#69525 = CARTESIAN_POINT('',(-1.495,-3.96,1.615)); +#69526 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69527 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69528 = ADVANCED_FACE('',(#69529),#69540,.T.); +#69529 = FACE_BOUND('',#69530,.T.); +#69530 = EDGE_LOOP('',(#69531,#69532,#69538,#69539)); +#69531 = ORIENTED_EDGE('',*,*,#69391,.T.); +#69532 = ORIENTED_EDGE('',*,*,#69533,.T.); +#69533 = EDGE_CURVE('',#69392,#69027,#69534,.T.); +#69534 = LINE('',#69535,#69536); +#69535 = CARTESIAN_POINT('',(7.145,-1.73,-1.91)); +#69536 = VECTOR('',#69537,1.); +#69537 = DIRECTION('',(1.,0.,2.8E-16)); +#69538 = ORIENTED_EDGE('',*,*,#69026,.F.); +#69539 = ORIENTED_EDGE('',*,*,#68429,.F.); +#69540 = PLANE('',#69541); +#69541 = AXIS2_PLACEMENT_3D('',#69542,#69543,#69544); +#69542 = CARTESIAN_POINT('',(7.145,-1.73,1.615)); +#69543 = DIRECTION('',(0.,-1.,4.4E-16)); +#69544 = DIRECTION('',(1.,1.232E-31,2.8E-16)); +#69545 = ADVANCED_FACE('',(#69546),#69557,.T.); +#69546 = FACE_BOUND('',#69547,.F.); +#69547 = EDGE_LOOP('',(#69548,#69549,#69555,#69556)); +#69548 = ORIENTED_EDGE('',*,*,#69100,.T.); +#69549 = ORIENTED_EDGE('',*,*,#69550,.T.); +#69550 = EDGE_CURVE('',#69101,#68770,#69551,.T.); +#69551 = LINE('',#69552,#69553); +#69552 = CARTESIAN_POINT('',(-1.195,-1.73,-1.91)); +#69553 = VECTOR('',#69554,1.); +#69554 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69555 = ORIENTED_EDGE('',*,*,#68769,.F.); +#69556 = ORIENTED_EDGE('',*,*,#68446,.F.); +#69557 = PLANE('',#69558); +#69558 = AXIS2_PLACEMENT_3D('',#69559,#69560,#69561); +#69559 = CARTESIAN_POINT('',(-1.195,-1.73,1.615)); +#69560 = DIRECTION('',(-2.2E-16,-1.,4.4E-16)); +#69561 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69562 = ADVANCED_FACE('',(#69563),#69581,.F.); +#69563 = FACE_BOUND('',#69564,.F.); +#69564 = EDGE_LOOP('',(#69565,#69573,#69579,#69580)); +#69565 = ORIENTED_EDGE('',*,*,#69566,.F.); +#69566 = EDGE_CURVE('',#69567,#68461,#69569,.T.); +#69567 = VERTEX_POINT('',#69568); +#69568 = CARTESIAN_POINT('',(3.588392739261,-2.26,0.879662667505)); +#69569 = LINE('',#69570,#69571); +#69570 = CARTESIAN_POINT('',(3.588392739261,-2.26,0.879662667505)); +#69571 = VECTOR('',#69572,1.); +#69572 = DIRECTION('',(0.906307787037,4.999999999998E-17,-0.422618261741 + )); +#69573 = ORIENTED_EDGE('',*,*,#69574,.F.); +#69574 = EDGE_CURVE('',#68511,#69567,#69575,.T.); +#69575 = LINE('',#69576,#69577); +#69576 = CARTESIAN_POINT('',(3.334821782217,-2.26,0.335877995283)); +#69577 = VECTOR('',#69578,1.); +#69578 = DIRECTION('',(0.422618261741,5.299999999998E-16,0.906307787037) + ); +#69579 = ORIENTED_EDGE('',*,*,#68510,.T.); +#69580 = ORIENTED_EDGE('',*,*,#68471,.F.); +#69581 = PLANE('',#69582); +#69582 = AXIS2_PLACEMENT_3D('',#69583,#69584,#69585); +#69583 = CARTESIAN_POINT('',(3.334821782217,-2.26,0.335877995283)); +#69584 = DIRECTION('',(1.4E-16,-1.,5.2E-16)); +#69585 = DIRECTION('',(-0.422618261741,-5.304466059027E-16, + -0.906307787037)); +#69586 = ADVANCED_FACE('',(#69587),#69605,.F.); +#69587 = FACE_BOUND('',#69588,.T.); +#69588 = EDGE_LOOP('',(#69589,#69597,#69603,#69604)); +#69589 = ORIENTED_EDGE('',*,*,#69590,.F.); +#69590 = EDGE_CURVE('',#69591,#68486,#69593,.T.); +#69591 = VERTEX_POINT('',#69592); +#69592 = CARTESIAN_POINT('',(2.361607260739,-2.26,0.879662667505)); +#69593 = LINE('',#69594,#69595); +#69594 = CARTESIAN_POINT('',(2.361607260739,-2.26,0.879662667505)); +#69595 = VECTOR('',#69596,1.); +#69596 = DIRECTION('',(-0.906307787037,2.499999999999E-16, + -0.422618261741)); +#69597 = ORIENTED_EDGE('',*,*,#69598,.F.); +#69598 = EDGE_CURVE('',#68567,#69591,#69599,.T.); +#69599 = LINE('',#69600,#69601); +#69600 = CARTESIAN_POINT('',(2.615178217783,-2.26,0.335877995283)); +#69601 = VECTOR('',#69602,1.); +#69602 = DIRECTION('',(-0.422618261741,6.299999999997E-16,0.906307787037 + )); +#69603 = ORIENTED_EDGE('',*,*,#68566,.T.); +#69604 = ORIENTED_EDGE('',*,*,#68496,.F.); +#69605 = PLANE('',#69606); +#69606 = AXIS2_PLACEMENT_3D('',#69607,#69608,#69609); +#69607 = CARTESIAN_POINT('',(2.615178217783,-2.26,0.335877995283)); +#69608 = DIRECTION('',(-3.6E-16,-1.,5.2E-16)); +#69609 = DIRECTION('',(-0.422618261741,6.234226234857E-16,0.906307787037 + )); +#69610 = ADVANCED_FACE('',(#69611),#69629,.T.); +#69611 = FACE_BOUND('',#69612,.F.); +#69612 = EDGE_LOOP('',(#69613,#69614,#69615,#69623)); +#69613 = ORIENTED_EDGE('',*,*,#68518,.T.); +#69614 = ORIENTED_EDGE('',*,*,#69574,.T.); +#69615 = ORIENTED_EDGE('',*,*,#69616,.F.); +#69616 = EDGE_CURVE('',#69617,#69567,#69619,.T.); +#69617 = VERTEX_POINT('',#69618); +#69618 = CARTESIAN_POINT('',(3.588392739261,-2.66,0.879662667505)); +#69619 = LINE('',#69620,#69621); +#69620 = CARTESIAN_POINT('',(3.588392739261,-5.435,0.879662667505)); +#69621 = VECTOR('',#69622,1.); +#69622 = DIRECTION('',(-5.E-16,1.,-9.7E-16)); +#69623 = ORIENTED_EDGE('',*,*,#69624,.F.); +#69624 = EDGE_CURVE('',#68519,#69617,#69625,.T.); +#69625 = LINE('',#69626,#69627); +#69626 = CARTESIAN_POINT('',(3.334821782217,-2.66,0.335877995283)); +#69627 = VECTOR('',#69628,1.); +#69628 = DIRECTION('',(0.422618261741,5.299999999998E-16,0.906307787037) + ); +#69629 = PLANE('',#69630); +#69630 = AXIS2_PLACEMENT_3D('',#69631,#69632,#69633); +#69631 = CARTESIAN_POINT('',(3.525,-2.46,0.74371649945)); +#69632 = DIRECTION('',(-0.906307787037,-6.999999999997E-17, + 0.422618261741)); +#69633 = DIRECTION('',(-0.422618261741,-1.999999999999E-16, + -0.906307787037)); +#69634 = ADVANCED_FACE('',(#69635),#69646,.F.); +#69635 = FACE_BOUND('',#69636,.F.); +#69636 = EDGE_LOOP('',(#69637,#69638,#69639,#69645)); +#69637 = ORIENTED_EDGE('',*,*,#68526,.F.); +#69638 = ORIENTED_EDGE('',*,*,#69624,.T.); +#69639 = ORIENTED_EDGE('',*,*,#69640,.T.); +#69640 = EDGE_CURVE('',#69617,#68544,#69641,.T.); +#69641 = LINE('',#69642,#69643); +#69642 = CARTESIAN_POINT('',(3.588392739261,-2.66,0.879662667505)); +#69643 = VECTOR('',#69644,1.); +#69644 = DIRECTION('',(0.906307787037,-8.999999999996E-17, + -0.422618261741)); +#69645 = ORIENTED_EDGE('',*,*,#68552,.F.); +#69646 = PLANE('',#69647); +#69647 = AXIS2_PLACEMENT_3D('',#69648,#69649,#69650); +#69648 = CARTESIAN_POINT('',(3.334821782217,-2.66,0.335877995283)); +#69649 = DIRECTION('',(-1.4E-16,1.,-5.2E-16)); +#69650 = DIRECTION('',(0.422618261741,5.304466059027E-16,0.906307787037) + ); +#69651 = ADVANCED_FACE('',(#69652),#69670,.T.); +#69652 = FACE_BOUND('',#69653,.T.); +#69653 = EDGE_LOOP('',(#69654,#69655,#69656,#69664)); +#69654 = ORIENTED_EDGE('',*,*,#68574,.T.); +#69655 = ORIENTED_EDGE('',*,*,#69598,.T.); +#69656 = ORIENTED_EDGE('',*,*,#69657,.F.); +#69657 = EDGE_CURVE('',#69658,#69591,#69660,.T.); +#69658 = VERTEX_POINT('',#69659); +#69659 = CARTESIAN_POINT('',(2.361607260739,-2.66,0.879662667505)); +#69660 = LINE('',#69661,#69662); +#69661 = CARTESIAN_POINT('',(2.361607260739,-5.435,0.879662667505)); +#69662 = VECTOR('',#69663,1.); +#69663 = DIRECTION('',(7.2E-16,1.,-9.7E-16)); +#69664 = ORIENTED_EDGE('',*,*,#69665,.F.); +#69665 = EDGE_CURVE('',#68575,#69658,#69666,.T.); +#69666 = LINE('',#69667,#69668); +#69667 = CARTESIAN_POINT('',(2.615178217783,-2.66,0.335877995283)); +#69668 = VECTOR('',#69669,1.); +#69669 = DIRECTION('',(-0.422618261741,6.299999999997E-16,0.906307787037 + )); +#69670 = PLANE('',#69671); +#69671 = AXIS2_PLACEMENT_3D('',#69672,#69673,#69674); +#69672 = CARTESIAN_POINT('',(2.425,-2.46,0.74371649945)); +#69673 = DIRECTION('',(0.906307787037,-2.699999999999E-16,0.422618261741 + )); +#69674 = DIRECTION('',(-0.422618261741,2.999999999999E-16,0.906307787037 + )); +#69675 = ADVANCED_FACE('',(#69676),#69687,.F.); +#69676 = FACE_BOUND('',#69677,.T.); +#69677 = EDGE_LOOP('',(#69678,#69679,#69680,#69686)); +#69678 = ORIENTED_EDGE('',*,*,#68582,.F.); +#69679 = ORIENTED_EDGE('',*,*,#69665,.T.); +#69680 = ORIENTED_EDGE('',*,*,#69681,.T.); +#69681 = EDGE_CURVE('',#69658,#68600,#69682,.T.); +#69682 = LINE('',#69683,#69684); +#69683 = CARTESIAN_POINT('',(2.361607260739,-2.66,0.879662667505)); +#69684 = VECTOR('',#69685,1.); +#69685 = DIRECTION('',(-0.906307787037,1.1E-16,-0.422618261741)); +#69686 = ORIENTED_EDGE('',*,*,#68608,.F.); +#69687 = PLANE('',#69688); +#69688 = AXIS2_PLACEMENT_3D('',#69689,#69690,#69691); +#69689 = CARTESIAN_POINT('',(2.615178217783,-2.66,0.335877995283)); +#69690 = DIRECTION('',(3.6E-16,1.,-5.2E-16)); +#69691 = DIRECTION('',(0.422618261741,-6.234226234857E-16, + -0.906307787037)); +#69692 = ADVANCED_FACE('',(#69693),#69713,.T.); +#69693 = FACE_BOUND('',#69694,.T.); +#69694 = EDGE_LOOP('',(#69695,#69704,#69705,#69706)); +#69695 = ORIENTED_EDGE('',*,*,#69696,.F.); +#69696 = EDGE_CURVE('',#68623,#69697,#69699,.T.); +#69697 = VERTEX_POINT('',#69698); +#69698 = CARTESIAN_POINT('',(0.535,-2.85,-1.E-02)); +#69699 = CIRCLE('',#69700,0.1); +#69700 = AXIS2_PLACEMENT_3D('',#69701,#69702,#69703); +#69701 = CARTESIAN_POINT('',(0.535,-2.85,9.E-02)); +#69702 = DIRECTION('',(-1.9E-16,-1.,1.1E-16)); +#69703 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#69704 = ORIENTED_EDGE('',*,*,#68622,.T.); +#69705 = ORIENTED_EDGE('',*,*,#69696,.T.); +#69706 = ORIENTED_EDGE('',*,*,#69707,.F.); +#69707 = EDGE_CURVE('',#69697,#69697,#69708,.T.); +#69708 = CIRCLE('',#69709,0.25); +#69709 = AXIS2_PLACEMENT_3D('',#69710,#69711,#69712); +#69710 = CARTESIAN_POINT('',(0.785,-2.85,-1.E-02)); +#69711 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#69712 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#69713 = TOROIDAL_SURFACE('',#69714,0.25,0.1); +#69714 = AXIS2_PLACEMENT_3D('',#69715,#69716,#69717); +#69715 = CARTESIAN_POINT('',(0.785,-2.85,9.E-02)); +#69716 = DIRECTION('',(2.2E-16,-1.1E-16,-1.)); +#69717 = DIRECTION('',(-1.,1.9E-16,-2.2E-16)); +#69718 = ADVANCED_FACE('',(#69719),#69739,.T.); +#69719 = FACE_BOUND('',#69720,.T.); +#69720 = EDGE_LOOP('',(#69721,#69730,#69737,#69738)); +#69721 = ORIENTED_EDGE('',*,*,#69722,.T.); +#69722 = EDGE_CURVE('',#69723,#69723,#69725,.T.); +#69723 = VERTEX_POINT('',#69724); +#69724 = CARTESIAN_POINT('',(5.415,-2.85,-1.E-02)); +#69725 = CIRCLE('',#69726,0.25); +#69726 = AXIS2_PLACEMENT_3D('',#69727,#69728,#69729); +#69727 = CARTESIAN_POINT('',(5.165,-2.85,-1.E-02)); +#69728 = DIRECTION('',(-1.81528329172E-49,1.1E-16,1.)); +#69729 = DIRECTION('',(1.,-3.E-17,3.3E-33)); +#69730 = ORIENTED_EDGE('',*,*,#69731,.F.); +#69731 = EDGE_CURVE('',#68648,#69723,#69732,.T.); +#69732 = CIRCLE('',#69733,0.1); +#69733 = AXIS2_PLACEMENT_3D('',#69734,#69735,#69736); +#69734 = CARTESIAN_POINT('',(5.415,-2.85,9.E-02)); +#69735 = DIRECTION('',(3.E-17,1.,-1.1E-16)); +#69736 = DIRECTION('',(1.,-3.E-17,-1.81528329172E-49)); +#69737 = ORIENTED_EDGE('',*,*,#68655,.F.); +#69738 = ORIENTED_EDGE('',*,*,#69731,.T.); +#69739 = TOROIDAL_SURFACE('',#69740,0.25,0.1); +#69740 = AXIS2_PLACEMENT_3D('',#69741,#69742,#69743); +#69741 = CARTESIAN_POINT('',(5.165,-2.85,9.E-02)); +#69742 = DIRECTION('',(0.,-1.1E-16,-1.)); +#69743 = DIRECTION('',(1.,-3.E-17,3.3E-33)); +#69744 = ADVANCED_FACE('',(#69745),#69756,.F.); +#69745 = FACE_BOUND('',#69746,.T.); +#69746 = EDGE_LOOP('',(#69747,#69748,#69754,#69755)); +#69747 = ORIENTED_EDGE('',*,*,#69109,.T.); +#69748 = ORIENTED_EDGE('',*,*,#69749,.T.); +#69749 = EDGE_CURVE('',#69110,#68755,#69750,.T.); +#69750 = LINE('',#69751,#69752); +#69751 = CARTESIAN_POINT('',(0.775,-0.63,1.285)); +#69752 = VECTOR('',#69753,1.); +#69753 = DIRECTION('',(-1.,0.,6.E-17)); +#69754 = ORIENTED_EDGE('',*,*,#68762,.F.); +#69755 = ORIENTED_EDGE('',*,*,#68720,.F.); +#69756 = PLANE('',#69757); +#69757 = AXIS2_PLACEMENT_3D('',#69758,#69759,#69760); +#69758 = CARTESIAN_POINT('',(-1.195,-0.63,1.615)); +#69759 = DIRECTION('',(0.,-1.,6.7E-16)); +#69760 = DIRECTION('',(1.,-4.02E-32,-6.E-17)); +#69761 = ADVANCED_FACE('',(#69762),#69778,.T.); +#69762 = FACE_BOUND('',#69763,.F.); +#69763 = EDGE_LOOP('',(#69764,#69765,#69771,#69772)); +#69764 = ORIENTED_EDGE('',*,*,#69133,.F.); +#69765 = ORIENTED_EDGE('',*,*,#69766,.T.); +#69766 = EDGE_CURVE('',#69126,#68737,#69767,.T.); +#69767 = LINE('',#69768,#69769); +#69768 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#69769 = VECTOR('',#69770,1.); +#69770 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#69771 = ORIENTED_EDGE('',*,*,#68736,.T.); +#69772 = ORIENTED_EDGE('',*,*,#69773,.T.); +#69773 = EDGE_CURVE('',#68739,#69134,#69774,.T.); +#69774 = LINE('',#69775,#69776); +#69775 = CARTESIAN_POINT('',(-1.495,-0.23,-1.91)); +#69776 = VECTOR('',#69777,1.); +#69777 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69778 = PLANE('',#69779); +#69779 = AXIS2_PLACEMENT_3D('',#69780,#69781,#69782); +#69780 = CARTESIAN_POINT('',(-1.495,-0.23,1.615)); +#69781 = DIRECTION('',(2.2E-16,1.,-4.4E-16)); +#69782 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69783 = ADVANCED_FACE('',(#69784),#69795,.T.); +#69784 = FACE_BOUND('',#69785,.T.); +#69785 = EDGE_LOOP('',(#69786,#69787,#69788,#69794)); +#69786 = ORIENTED_EDGE('',*,*,#69773,.T.); +#69787 = ORIENTED_EDGE('',*,*,#69141,.T.); +#69788 = ORIENTED_EDGE('',*,*,#69789,.F.); +#69789 = EDGE_CURVE('',#68787,#69142,#69790,.T.); +#69790 = LINE('',#69791,#69792); +#69791 = CARTESIAN_POINT('',(-1.495,-0.43,-2.11)); +#69792 = VECTOR('',#69793,1.); +#69793 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69794 = ORIENTED_EDGE('',*,*,#68794,.F.); +#69795 = CYLINDRICAL_SURFACE('',#69796,0.2); +#69796 = AXIS2_PLACEMENT_3D('',#69797,#69798,#69799); +#69797 = CARTESIAN_POINT('',(-1.495,-0.43,-1.91)); +#69798 = DIRECTION('',(1.,-2.2E-16,-6.E-17)); +#69799 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#69800 = ADVANCED_FACE('',(#69801),#69826,.F.); +#69801 = FACE_BOUND('',#69802,.T.); +#69802 = EDGE_LOOP('',(#69803,#69811,#69812,#69820)); +#69803 = ORIENTED_EDGE('',*,*,#69804,.F.); +#69804 = EDGE_CURVE('',#68737,#69805,#69807,.T.); +#69805 = VERTEX_POINT('',#69806); +#69806 = CARTESIAN_POINT('',(-1.495,-3.E-02,0.885)); +#69807 = LINE('',#69808,#69809); +#69808 = CARTESIAN_POINT('',(-1.495,-0.23,0.885)); +#69809 = VECTOR('',#69810,1.); +#69810 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69811 = ORIENTED_EDGE('',*,*,#68746,.F.); +#69812 = ORIENTED_EDGE('',*,*,#69813,.T.); +#69813 = EDGE_CURVE('',#68747,#69814,#69816,.T.); +#69814 = VERTEX_POINT('',#69815); +#69815 = CARTESIAN_POINT('',(-1.495,-3.E-02,1.285)); +#69816 = LINE('',#69817,#69818); +#69817 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#69818 = VECTOR('',#69819,1.); +#69819 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#69820 = ORIENTED_EDGE('',*,*,#69821,.F.); +#69821 = EDGE_CURVE('',#69805,#69814,#69822,.T.); +#69822 = LINE('',#69823,#69824); +#69823 = CARTESIAN_POINT('',(-1.495,-3.E-02,0.885)); +#69824 = VECTOR('',#69825,1.); +#69825 = DIRECTION('',(-1.E-16,8.9E-16,1.)); +#69826 = PLANE('',#69827); +#69827 = AXIS2_PLACEMENT_3D('',#69828,#69829,#69830); +#69828 = CARTESIAN_POINT('',(-1.495,-0.23,0.885)); +#69829 = DIRECTION('',(1.,-2.2E-16,1.E-16)); +#69830 = DIRECTION('',(1.E-16,-8.9E-16,-1.)); +#69831 = ADVANCED_FACE('',(#69832),#69843,.F.); +#69832 = FACE_BOUND('',#69833,.T.); +#69833 = EDGE_LOOP('',(#69834,#69835,#69836,#69837)); +#69834 = ORIENTED_EDGE('',*,*,#68786,.T.); +#69835 = ORIENTED_EDGE('',*,*,#69789,.T.); +#69836 = ORIENTED_EDGE('',*,*,#69150,.T.); +#69837 = ORIENTED_EDGE('',*,*,#69838,.T.); +#69838 = EDGE_CURVE('',#69151,#68778,#69839,.T.); +#69839 = LINE('',#69840,#69841); +#69840 = CARTESIAN_POINT('',(-1.195,-1.53,-2.11)); +#69841 = VECTOR('',#69842,1.); +#69842 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69843 = PLANE('',#69844); +#69844 = AXIS2_PLACEMENT_3D('',#69845,#69846,#69847); +#69845 = CARTESIAN_POINT('',(-1.345,-2.921081081081,-2.11)); +#69846 = DIRECTION('',(-2.2E-16,5.6E-16,1.)); +#69847 = DIRECTION('',(-2.2E-16,-1.,5.6E-16)); +#69848 = ADVANCED_FACE('',(#69849),#69860,.T.); +#69849 = FACE_BOUND('',#69850,.F.); +#69850 = EDGE_LOOP('',(#69851,#69852,#69853,#69854)); +#69851 = ORIENTED_EDGE('',*,*,#69117,.T.); +#69852 = ORIENTED_EDGE('',*,*,#69749,.T.); +#69853 = ORIENTED_EDGE('',*,*,#68754,.T.); +#69854 = ORIENTED_EDGE('',*,*,#69855,.T.); +#69855 = EDGE_CURVE('',#68747,#69118,#69856,.T.); +#69856 = LINE('',#69857,#69858); +#69857 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#69858 = VECTOR('',#69859,1.); +#69859 = DIRECTION('',(1.,-5.E-16,-6.E-17)); +#69860 = PLANE('',#69861); +#69861 = AXIS2_PLACEMENT_3D('',#69862,#69863,#69864); +#69862 = CARTESIAN_POINT('',(-1.345,-2.921081081081,1.285)); +#69863 = DIRECTION('',(-2.2E-16,5.6E-16,1.)); +#69864 = DIRECTION('',(-2.2E-16,-1.,5.6E-16)); +#69865 = ADVANCED_FACE('',(#69866),#69872,.T.); +#69866 = FACE_BOUND('',#69867,.T.); +#69867 = EDGE_LOOP('',(#69868,#69869,#69870,#69871)); +#69868 = ORIENTED_EDGE('',*,*,#69550,.T.); +#69869 = ORIENTED_EDGE('',*,*,#68777,.T.); +#69870 = ORIENTED_EDGE('',*,*,#69838,.F.); +#69871 = ORIENTED_EDGE('',*,*,#69158,.F.); +#69872 = CYLINDRICAL_SURFACE('',#69873,0.2); +#69873 = AXIS2_PLACEMENT_3D('',#69874,#69875,#69876); +#69874 = CARTESIAN_POINT('',(-1.195,-1.53,-1.91)); +#69875 = DIRECTION('',(-1.,2.2E-16,6.E-17)); +#69876 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#69877 = ADVANCED_FACE('',(#69878),#69889,.T.); +#69878 = FACE_BOUND('',#69879,.T.); +#69879 = EDGE_LOOP('',(#69880,#69881,#69887,#69888)); +#69880 = ORIENTED_EDGE('',*,*,#69190,.T.); +#69881 = ORIENTED_EDGE('',*,*,#69882,.T.); +#69882 = EDGE_CURVE('',#69191,#68879,#69883,.T.); +#69883 = LINE('',#69884,#69885); +#69884 = CARTESIAN_POINT('',(-1.195,-4.16,-0.81)); +#69885 = VECTOR('',#69886,1.); +#69886 = DIRECTION('',(-1.,0.,6.E-17)); +#69887 = ORIENTED_EDGE('',*,*,#68886,.F.); +#69888 = ORIENTED_EDGE('',*,*,#69518,.F.); +#69889 = CYLINDRICAL_SURFACE('',#69890,0.2); +#69890 = AXIS2_PLACEMENT_3D('',#69891,#69892,#69893); +#69891 = CARTESIAN_POINT('',(-1.195,-4.16,-0.61)); +#69892 = DIRECTION('',(-1.,0.,6.E-17)); +#69893 = DIRECTION('',(-1.98E-32,1.,-3.3E-16)); +#69894 = ADVANCED_FACE('',(#69895),#69906,.T.); +#69895 = FACE_BOUND('',#69896,.F.); +#69896 = EDGE_LOOP('',(#69897,#69898,#69899,#69900)); +#69897 = ORIENTED_EDGE('',*,*,#69199,.T.); +#69898 = ORIENTED_EDGE('',*,*,#69882,.T.); +#69899 = ORIENTED_EDGE('',*,*,#68878,.T.); +#69900 = ORIENTED_EDGE('',*,*,#69901,.F.); +#69901 = EDGE_CURVE('',#69200,#68870,#69902,.T.); +#69902 = LINE('',#69903,#69904); +#69903 = CARTESIAN_POINT('',(-1.195,-4.56,-0.81)); +#69904 = VECTOR('',#69905,1.); +#69905 = DIRECTION('',(-1.,0.,6.E-17)); +#69906 = PLANE('',#69907); +#69907 = AXIS2_PLACEMENT_3D('',#69908,#69909,#69910); +#69908 = CARTESIAN_POINT('',(2.975,-3.96,-0.81)); +#69909 = DIRECTION('',(-6.E-17,-3.3E-16,-1.)); +#69910 = DIRECTION('',(-9.081839894577E-49,1.,-3.3E-16)); +#69911 = ADVANCED_FACE('',(#69912),#69923,.T.); +#69912 = FACE_BOUND('',#69913,.T.); +#69913 = EDGE_LOOP('',(#69914,#69915,#69921,#69922)); +#69914 = ORIENTED_EDGE('',*,*,#69207,.T.); +#69915 = ORIENTED_EDGE('',*,*,#69916,.T.); +#69916 = EDGE_CURVE('',#69208,#68862,#69917,.T.); +#69917 = LINE('',#69918,#69919); +#69918 = CARTESIAN_POINT('',(-1.195,-4.76,-0.61)); +#69919 = VECTOR('',#69920,1.); +#69920 = DIRECTION('',(-1.,0.,6.E-17)); +#69921 = ORIENTED_EDGE('',*,*,#68869,.F.); +#69922 = ORIENTED_EDGE('',*,*,#69901,.F.); +#69923 = CYLINDRICAL_SURFACE('',#69924,0.2); +#69924 = AXIS2_PLACEMENT_3D('',#69925,#69926,#69927); +#69925 = CARTESIAN_POINT('',(-1.195,-4.56,-0.61)); +#69926 = DIRECTION('',(-1.,0.,6.E-17)); +#69927 = DIRECTION('',(-6.E-17,-2.2E-16,-1.)); +#69928 = ADVANCED_FACE('',(#69929),#69940,.T.); +#69929 = FACE_BOUND('',#69930,.T.); +#69930 = EDGE_LOOP('',(#69931,#69932,#69933,#69939)); +#69931 = ORIENTED_EDGE('',*,*,#69484,.T.); +#69932 = ORIENTED_EDGE('',*,*,#68826,.T.); +#69933 = ORIENTED_EDGE('',*,*,#69934,.F.); +#69934 = EDGE_CURVE('',#69243,#68827,#69935,.T.); +#69935 = LINE('',#69936,#69937); +#69936 = CARTESIAN_POINT('',(-1.195,-5.36,-1.E-02)); +#69937 = VECTOR('',#69938,1.); +#69938 = DIRECTION('',(-1.,0.,6.E-17)); +#69939 = ORIENTED_EDGE('',*,*,#69250,.F.); +#69940 = CYLINDRICAL_SURFACE('',#69941,0.2); +#69941 = AXIS2_PLACEMENT_3D('',#69942,#69943,#69944); +#69942 = CARTESIAN_POINT('',(-1.195,-5.36,0.19)); +#69943 = DIRECTION('',(-1.,0.,6.E-17)); +#69944 = DIRECTION('',(1.98E-32,-1.,3.3E-16)); +#69945 = ADVANCED_FACE('',(#69946),#69957,.T.); +#69946 = FACE_BOUND('',#69947,.F.); +#69947 = EDGE_LOOP('',(#69948,#69949,#69950,#69951)); +#69948 = ORIENTED_EDGE('',*,*,#69216,.T.); +#69949 = ORIENTED_EDGE('',*,*,#69916,.T.); +#69950 = ORIENTED_EDGE('',*,*,#68861,.T.); +#69951 = ORIENTED_EDGE('',*,*,#69952,.F.); +#69952 = EDGE_CURVE('',#69217,#68853,#69953,.T.); +#69953 = LINE('',#69954,#69955); +#69954 = CARTESIAN_POINT('',(2.975,-4.76,-1.E-02)); +#69955 = VECTOR('',#69956,1.); +#69956 = DIRECTION('',(-1.,0.,6.E-17)); +#69957 = PLANE('',#69958); +#69958 = AXIS2_PLACEMENT_3D('',#69959,#69960,#69961); +#69959 = CARTESIAN_POINT('',(2.975,-4.76,-0.81)); +#69960 = DIRECTION('',(0.,-1.,3.3E-16)); +#69961 = DIRECTION('',(-0.,-3.3E-16,-1.)); +#69962 = ADVANCED_FACE('',(#69963),#69974,.F.); +#69963 = FACE_BOUND('',#69964,.T.); +#69964 = EDGE_LOOP('',(#69965,#69966,#69967,#69968)); +#69965 = ORIENTED_EDGE('',*,*,#69242,.T.); +#69966 = ORIENTED_EDGE('',*,*,#69934,.T.); +#69967 = ORIENTED_EDGE('',*,*,#68835,.T.); +#69968 = ORIENTED_EDGE('',*,*,#69969,.F.); +#69969 = EDGE_CURVE('',#69234,#68836,#69970,.T.); +#69970 = LINE('',#69971,#69972); +#69971 = CARTESIAN_POINT('',(2.975,-5.21,-1.E-02)); +#69972 = VECTOR('',#69973,1.); +#69973 = DIRECTION('',(-1.,0.,6.E-17)); +#69974 = PLANE('',#69975); +#69975 = AXIS2_PLACEMENT_3D('',#69976,#69977,#69978); +#69976 = CARTESIAN_POINT('',(2.975,-5.56,-1.E-02)); +#69977 = DIRECTION('',(6.E-17,3.3E-16,1.)); +#69978 = DIRECTION('',(9.081839894577E-49,-1.,3.3E-16)); +#69979 = ADVANCED_FACE('',(#69980),#69991,.F.); +#69980 = FACE_BOUND('',#69981,.F.); +#69981 = EDGE_LOOP('',(#69982,#69983,#69984,#69985)); +#69982 = ORIENTED_EDGE('',*,*,#69224,.F.); +#69983 = ORIENTED_EDGE('',*,*,#69952,.T.); +#69984 = ORIENTED_EDGE('',*,*,#68852,.T.); +#69985 = ORIENTED_EDGE('',*,*,#69986,.F.); +#69986 = EDGE_CURVE('',#69225,#68844,#69987,.T.); +#69987 = LINE('',#69988,#69989); +#69988 = CARTESIAN_POINT('',(2.975,-5.067355715851,7.23557158515E-02)); +#69989 = VECTOR('',#69990,1.); +#69990 = DIRECTION('',(-1.,0.,6.E-17)); +#69991 = CYLINDRICAL_SURFACE('',#69992,0.164711431703); +#69992 = AXIS2_PLACEMENT_3D('',#69993,#69994,#69995); +#69993 = CARTESIAN_POINT('',(2.975,-4.924711431703,-1.E-02)); +#69994 = DIRECTION('',(1.,0.,0.)); +#69995 = DIRECTION('',(0.,1.,-3.3E-16)); +#69996 = ADVANCED_FACE('',(#69997),#70003,.T.); +#69997 = FACE_BOUND('',#69998,.T.); +#69998 = EDGE_LOOP('',(#69999,#70000,#70001,#70002)); +#69999 = ORIENTED_EDGE('',*,*,#69233,.F.); +#70000 = ORIENTED_EDGE('',*,*,#69969,.T.); +#70001 = ORIENTED_EDGE('',*,*,#68843,.T.); +#70002 = ORIENTED_EDGE('',*,*,#69986,.F.); +#70003 = CYLINDRICAL_SURFACE('',#70004,0.164711431703); +#70004 = AXIS2_PLACEMENT_3D('',#70005,#70006,#70007); +#70005 = CARTESIAN_POINT('',(2.975,-5.21,0.154711431703)); +#70006 = DIRECTION('',(1.,0.,0.)); +#70007 = DIRECTION('',(0.,1.,-3.3E-16)); +#70008 = ADVANCED_FACE('',(#70009),#70020,.T.); +#70009 = FACE_BOUND('',#70010,.T.); +#70010 = EDGE_LOOP('',(#70011,#70012,#70013,#70019)); +#70011 = ORIENTED_EDGE('',*,*,#69501,.T.); +#70012 = ORIENTED_EDGE('',*,*,#68978,.T.); +#70013 = ORIENTED_EDGE('',*,*,#70014,.F.); +#70014 = EDGE_CURVE('',#69317,#68971,#70015,.T.); +#70015 = LINE('',#70016,#70017); +#70016 = CARTESIAN_POINT('',(7.145,-4.16,-0.81)); +#70017 = VECTOR('',#70018,1.); +#70018 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70019 = ORIENTED_EDGE('',*,*,#69316,.F.); +#70020 = CYLINDRICAL_SURFACE('',#70021,0.2); +#70021 = AXIS2_PLACEMENT_3D('',#70022,#70023,#70024); +#70022 = CARTESIAN_POINT('',(7.145,-4.16,-0.61)); +#70023 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70024 = DIRECTION('',(2.2E-16,1.,-1.E-15)); +#70025 = ADVANCED_FACE('',(#70026),#70037,.T.); +#70026 = FACE_BOUND('',#70027,.T.); +#70027 = EDGE_LOOP('',(#70028,#70029,#70030,#70031)); +#70028 = ORIENTED_EDGE('',*,*,#69325,.F.); +#70029 = ORIENTED_EDGE('',*,*,#70014,.T.); +#70030 = ORIENTED_EDGE('',*,*,#68970,.F.); +#70031 = ORIENTED_EDGE('',*,*,#70032,.F.); +#70032 = EDGE_CURVE('',#69326,#68962,#70033,.T.); +#70033 = LINE('',#70034,#70035); +#70034 = CARTESIAN_POINT('',(7.145,-4.56,-0.81)); +#70035 = VECTOR('',#70036,1.); +#70036 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70037 = PLANE('',#70038); +#70038 = AXIS2_PLACEMENT_3D('',#70039,#70040,#70041); +#70039 = CARTESIAN_POINT('',(2.975,-3.96,-0.81)); +#70040 = DIRECTION('',(2.8E-16,-3.3E-16,-1.)); +#70041 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#70042 = ADVANCED_FACE('',(#70043),#70054,.T.); +#70043 = FACE_BOUND('',#70044,.T.); +#70044 = EDGE_LOOP('',(#70045,#70046,#70047,#70053)); +#70045 = ORIENTED_EDGE('',*,*,#70032,.T.); +#70046 = ORIENTED_EDGE('',*,*,#68961,.T.); +#70047 = ORIENTED_EDGE('',*,*,#70048,.F.); +#70048 = EDGE_CURVE('',#69334,#68954,#70049,.T.); +#70049 = LINE('',#70050,#70051); +#70050 = CARTESIAN_POINT('',(7.145,-4.76,-0.61)); +#70051 = VECTOR('',#70052,1.); +#70052 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70053 = ORIENTED_EDGE('',*,*,#69333,.F.); +#70054 = CYLINDRICAL_SURFACE('',#70055,0.2); +#70055 = AXIS2_PLACEMENT_3D('',#70056,#70057,#70058); +#70056 = CARTESIAN_POINT('',(7.145,-4.56,-0.61)); +#70057 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70058 = DIRECTION('',(2.8E-16,-7.8E-16,-1.)); +#70059 = ADVANCED_FACE('',(#70060),#70071,.T.); +#70060 = FACE_BOUND('',#70061,.T.); +#70061 = EDGE_LOOP('',(#70062,#70063,#70069,#70070)); +#70062 = ORIENTED_EDGE('',*,*,#69376,.T.); +#70063 = ORIENTED_EDGE('',*,*,#70064,.T.); +#70064 = EDGE_CURVE('',#69369,#68919,#70065,.T.); +#70065 = LINE('',#70066,#70067); +#70066 = CARTESIAN_POINT('',(7.145,-5.36,-1.E-02)); +#70067 = VECTOR('',#70068,1.); +#70068 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70069 = ORIENTED_EDGE('',*,*,#68918,.F.); +#70070 = ORIENTED_EDGE('',*,*,#69467,.F.); +#70071 = CYLINDRICAL_SURFACE('',#70072,0.2); +#70072 = AXIS2_PLACEMENT_3D('',#70073,#70074,#70075); +#70073 = CARTESIAN_POINT('',(7.145,-5.36,0.19)); +#70074 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70075 = DIRECTION('',(-2.2E-16,-1.,1.E-15)); +#70076 = ADVANCED_FACE('',(#70077),#70088,.T.); +#70077 = FACE_BOUND('',#70078,.T.); +#70078 = EDGE_LOOP('',(#70079,#70080,#70081,#70082)); +#70079 = ORIENTED_EDGE('',*,*,#69342,.F.); +#70080 = ORIENTED_EDGE('',*,*,#70048,.T.); +#70081 = ORIENTED_EDGE('',*,*,#68953,.F.); +#70082 = ORIENTED_EDGE('',*,*,#70083,.F.); +#70083 = EDGE_CURVE('',#69343,#68945,#70084,.T.); +#70084 = LINE('',#70085,#70086); +#70085 = CARTESIAN_POINT('',(2.975,-4.76,-1.E-02)); +#70086 = VECTOR('',#70087,1.); +#70087 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70088 = PLANE('',#70089); +#70089 = AXIS2_PLACEMENT_3D('',#70090,#70091,#70092); +#70090 = CARTESIAN_POINT('',(2.975,-4.76,-0.81)); +#70091 = DIRECTION('',(-2.2E-16,-1.,3.3E-16)); +#70092 = DIRECTION('',(-2.2E-16,3.3E-16,1.)); +#70093 = ADVANCED_FACE('',(#70094),#70105,.F.); +#70094 = FACE_BOUND('',#70095,.F.); +#70095 = EDGE_LOOP('',(#70096,#70097,#70098,#70099)); +#70096 = ORIENTED_EDGE('',*,*,#69368,.F.); +#70097 = ORIENTED_EDGE('',*,*,#70064,.T.); +#70098 = ORIENTED_EDGE('',*,*,#68927,.F.); +#70099 = ORIENTED_EDGE('',*,*,#70100,.F.); +#70100 = EDGE_CURVE('',#69360,#68928,#70101,.T.); +#70101 = LINE('',#70102,#70103); +#70102 = CARTESIAN_POINT('',(2.975,-5.21,-1.E-02)); +#70103 = VECTOR('',#70104,1.); +#70104 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70105 = PLANE('',#70106); +#70106 = AXIS2_PLACEMENT_3D('',#70107,#70108,#70109); +#70107 = CARTESIAN_POINT('',(2.975,-5.56,-1.E-02)); +#70108 = DIRECTION('',(-2.8E-16,3.3E-16,1.)); +#70109 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#70110 = ADVANCED_FACE('',(#70111),#70122,.F.); +#70111 = FACE_BOUND('',#70112,.F.); +#70112 = EDGE_LOOP('',(#70113,#70119,#70120,#70121)); +#70113 = ORIENTED_EDGE('',*,*,#70114,.T.); +#70114 = EDGE_CURVE('',#69351,#68936,#70115,.T.); +#70115 = LINE('',#70116,#70117); +#70116 = CARTESIAN_POINT('',(2.975,-5.067355715851,7.23557158515E-02)); +#70117 = VECTOR('',#70118,1.); +#70118 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70119 = ORIENTED_EDGE('',*,*,#68944,.T.); +#70120 = ORIENTED_EDGE('',*,*,#70083,.F.); +#70121 = ORIENTED_EDGE('',*,*,#69350,.F.); +#70122 = CYLINDRICAL_SURFACE('',#70123,0.164711431703); +#70123 = AXIS2_PLACEMENT_3D('',#70124,#70125,#70126); +#70124 = CARTESIAN_POINT('',(2.975,-4.924711431703,-1.E-02)); +#70125 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#70126 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#70127 = ADVANCED_FACE('',(#70128),#70134,.T.); +#70128 = FACE_BOUND('',#70129,.T.); +#70129 = EDGE_LOOP('',(#70130,#70131,#70132,#70133)); +#70130 = ORIENTED_EDGE('',*,*,#70114,.T.); +#70131 = ORIENTED_EDGE('',*,*,#68935,.T.); +#70132 = ORIENTED_EDGE('',*,*,#70100,.F.); +#70133 = ORIENTED_EDGE('',*,*,#69359,.F.); +#70134 = CYLINDRICAL_SURFACE('',#70135,0.164711431703); +#70135 = AXIS2_PLACEMENT_3D('',#70136,#70137,#70138); +#70136 = CARTESIAN_POINT('',(2.975,-5.21,0.154711431703)); +#70137 = DIRECTION('',(-1.,2.2E-16,-2.2E-16)); +#70138 = DIRECTION('',(2.2E-16,1.,-3.3E-16)); +#70139 = ADVANCED_FACE('',(#70140),#70156,.T.); +#70140 = FACE_BOUND('',#70141,.T.); +#70141 = EDGE_LOOP('',(#70142,#70143,#70149,#70150)); +#70142 = ORIENTED_EDGE('',*,*,#69424,.F.); +#70143 = ORIENTED_EDGE('',*,*,#70144,.T.); +#70144 = EDGE_CURVE('',#69417,#68994,#70145,.T.); +#70145 = LINE('',#70146,#70147); +#70146 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#70147 = VECTOR('',#70148,1.); +#70148 = DIRECTION('',(1.,0.,1.2E-16)); +#70149 = ORIENTED_EDGE('',*,*,#68993,.T.); +#70150 = ORIENTED_EDGE('',*,*,#70151,.T.); +#70151 = EDGE_CURVE('',#68996,#69425,#70152,.T.); +#70152 = LINE('',#70153,#70154); +#70153 = CARTESIAN_POINT('',(7.445,-0.23,-1.91)); +#70154 = VECTOR('',#70155,1.); +#70155 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#70156 = PLANE('',#70157); +#70157 = AXIS2_PLACEMENT_3D('',#70158,#70159,#70160); +#70158 = CARTESIAN_POINT('',(7.445,-0.23,1.615)); +#70159 = DIRECTION('',(0.,1.,-4.4E-16)); +#70160 = DIRECTION('',(-1.,-1.232E-31,-2.8E-16)); +#70161 = ADVANCED_FACE('',(#70162),#70173,.T.); +#70162 = FACE_BOUND('',#70163,.T.); +#70163 = EDGE_LOOP('',(#70164,#70165,#70171,#70172)); +#70164 = ORIENTED_EDGE('',*,*,#69051,.T.); +#70165 = ORIENTED_EDGE('',*,*,#70166,.T.); +#70166 = EDGE_CURVE('',#69044,#69433,#70167,.T.); +#70167 = LINE('',#70168,#70169); +#70168 = CARTESIAN_POINT('',(7.445,-0.43,-2.11)); +#70169 = VECTOR('',#70170,1.); +#70170 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#70171 = ORIENTED_EDGE('',*,*,#69432,.F.); +#70172 = ORIENTED_EDGE('',*,*,#70151,.F.); +#70173 = CYLINDRICAL_SURFACE('',#70174,0.2); +#70174 = AXIS2_PLACEMENT_3D('',#70175,#70176,#70177); +#70175 = CARTESIAN_POINT('',(7.445,-0.43,-1.91)); +#70176 = DIRECTION('',(-1.,-0.,-2.8E-16)); +#70177 = DIRECTION('',(2.8E-31,1.,-1.E-15)); +#70178 = ADVANCED_FACE('',(#70179),#70204,.F.); +#70179 = FACE_BOUND('',#70180,.F.); +#70180 = EDGE_LOOP('',(#70181,#70189,#70190,#70198)); +#70181 = ORIENTED_EDGE('',*,*,#70182,.F.); +#70182 = EDGE_CURVE('',#68994,#70183,#70185,.T.); +#70183 = VERTEX_POINT('',#70184); +#70184 = CARTESIAN_POINT('',(7.445,-3.E-02,0.885)); +#70185 = LINE('',#70186,#70187); +#70186 = CARTESIAN_POINT('',(7.445,-0.23,0.885)); +#70187 = VECTOR('',#70188,1.); +#70188 = DIRECTION('',(0.,1.,-2.2E-16)); +#70189 = ORIENTED_EDGE('',*,*,#69003,.F.); +#70190 = ORIENTED_EDGE('',*,*,#70191,.T.); +#70191 = EDGE_CURVE('',#69004,#70192,#70194,.T.); +#70192 = VERTEX_POINT('',#70193); +#70193 = CARTESIAN_POINT('',(7.445,-3.E-02,1.285)); +#70194 = LINE('',#70195,#70196); +#70195 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#70196 = VECTOR('',#70197,1.); +#70197 = DIRECTION('',(0.,1.,-2.2E-16)); +#70198 = ORIENTED_EDGE('',*,*,#70199,.F.); +#70199 = EDGE_CURVE('',#70183,#70192,#70200,.T.); +#70200 = LINE('',#70201,#70202); +#70201 = CARTESIAN_POINT('',(7.445,-3.E-02,0.885)); +#70202 = VECTOR('',#70203,1.); +#70203 = DIRECTION('',(-1.2E-16,8.9E-16,1.)); +#70204 = PLANE('',#70205); +#70205 = AXIS2_PLACEMENT_3D('',#70206,#70207,#70208); +#70206 = CARTESIAN_POINT('',(7.445,-0.23,0.885)); +#70207 = DIRECTION('',(-1.,-0.,-1.2E-16)); +#70208 = DIRECTION('',(-1.2E-16,8.9E-16,1.)); +#70209 = ADVANCED_FACE('',(#70210),#70221,.F.); +#70210 = FACE_BOUND('',#70211,.F.); +#70211 = EDGE_LOOP('',(#70212,#70213,#70214,#70215)); +#70212 = ORIENTED_EDGE('',*,*,#69043,.T.); +#70213 = ORIENTED_EDGE('',*,*,#70166,.T.); +#70214 = ORIENTED_EDGE('',*,*,#69441,.T.); +#70215 = ORIENTED_EDGE('',*,*,#70216,.T.); +#70216 = EDGE_CURVE('',#69442,#69035,#70217,.T.); +#70217 = LINE('',#70218,#70219); +#70218 = CARTESIAN_POINT('',(7.145,-1.53,-2.11)); +#70219 = VECTOR('',#70220,1.); +#70220 = DIRECTION('',(1.,0.,2.8E-16)); +#70221 = PLANE('',#70222); +#70222 = AXIS2_PLACEMENT_3D('',#70223,#70224,#70225); +#70223 = CARTESIAN_POINT('',(7.295,-2.921081081081,-2.11)); +#70224 = DIRECTION('',(0.,5.6E-16,1.)); +#70225 = DIRECTION('',(0.,1.,-5.6E-16)); +#70226 = ADVANCED_FACE('',(#70227),#70243,.T.); +#70227 = FACE_BOUND('',#70228,.T.); +#70228 = EDGE_LOOP('',(#70229,#70230,#70236,#70237)); +#70229 = ORIENTED_EDGE('',*,*,#69408,.T.); +#70230 = ORIENTED_EDGE('',*,*,#70231,.T.); +#70231 = EDGE_CURVE('',#69401,#69012,#70232,.T.); +#70232 = LINE('',#70233,#70234); +#70233 = CARTESIAN_POINT('',(5.175,-0.63,1.285)); +#70234 = VECTOR('',#70235,1.); +#70235 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70236 = ORIENTED_EDGE('',*,*,#69011,.T.); +#70237 = ORIENTED_EDGE('',*,*,#70238,.T.); +#70238 = EDGE_CURVE('',#69004,#69409,#70239,.T.); +#70239 = LINE('',#70240,#70241); +#70240 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#70241 = VECTOR('',#70242,1.); +#70242 = DIRECTION('',(-1.,2.8E-16,-2.8E-16)); +#70243 = PLANE('',#70244); +#70244 = AXIS2_PLACEMENT_3D('',#70245,#70246,#70247); +#70245 = CARTESIAN_POINT('',(7.295,-2.921081081081,1.285)); +#70246 = DIRECTION('',(0.,5.6E-16,1.)); +#70247 = DIRECTION('',(0.,1.,-5.6E-16)); +#70248 = ADVANCED_FACE('',(#70249),#70255,.T.); +#70249 = FACE_BOUND('',#70250,.T.); +#70250 = EDGE_LOOP('',(#70251,#70252,#70253,#70254)); +#70251 = ORIENTED_EDGE('',*,*,#69449,.T.); +#70252 = ORIENTED_EDGE('',*,*,#70216,.T.); +#70253 = ORIENTED_EDGE('',*,*,#69034,.F.); +#70254 = ORIENTED_EDGE('',*,*,#69533,.F.); +#70255 = CYLINDRICAL_SURFACE('',#70256,0.2); +#70256 = AXIS2_PLACEMENT_3D('',#70257,#70258,#70259); +#70257 = CARTESIAN_POINT('',(7.145,-1.53,-1.91)); +#70258 = DIRECTION('',(1.,0.,2.8E-16)); +#70259 = DIRECTION('',(-2.8E-31,-1.,1.E-15)); +#70260 = ADVANCED_FACE('',(#70261),#70267,.F.); +#70261 = FACE_BOUND('',#70262,.F.); +#70262 = EDGE_LOOP('',(#70263,#70264,#70265,#70266)); +#70263 = ORIENTED_EDGE('',*,*,#69400,.T.); +#70264 = ORIENTED_EDGE('',*,*,#70231,.T.); +#70265 = ORIENTED_EDGE('',*,*,#69019,.F.); +#70266 = ORIENTED_EDGE('',*,*,#69067,.F.); +#70267 = PLANE('',#70268); +#70268 = AXIS2_PLACEMENT_3D('',#70269,#70270,#70271); +#70269 = CARTESIAN_POINT('',(7.145,-0.63,1.615)); +#70270 = DIRECTION('',(-2.2E-16,-1.,6.7E-16)); +#70271 = DIRECTION('',(1.,-2.2E-16,2.8E-16)); +#70272 = ADVANCED_FACE('',(#70273),#70298,.F.); +#70273 = FACE_BOUND('',#70274,.T.); +#70274 = EDGE_LOOP('',(#70275,#70283,#70284,#70292)); +#70275 = ORIENTED_EDGE('',*,*,#70276,.F.); +#70276 = EDGE_CURVE('',#69118,#70277,#70279,.T.); +#70277 = VERTEX_POINT('',#70278); +#70278 = CARTESIAN_POINT('',(-1.195,-3.E-02,1.285)); +#70279 = LINE('',#70280,#70281); +#70280 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#70281 = VECTOR('',#70282,1.); +#70282 = DIRECTION('',(2.2E-16,1.,-2.2E-16)); +#70283 = ORIENTED_EDGE('',*,*,#69125,.T.); +#70284 = ORIENTED_EDGE('',*,*,#70285,.T.); +#70285 = EDGE_CURVE('',#69126,#70286,#70288,.T.); +#70286 = VERTEX_POINT('',#70287); +#70287 = CARTESIAN_POINT('',(-1.195,-3.E-02,0.885)); +#70288 = LINE('',#70289,#70290); +#70289 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#70290 = VECTOR('',#70291,1.); +#70291 = DIRECTION('',(2.2E-16,1.,-8.9E-16)); +#70292 = ORIENTED_EDGE('',*,*,#70293,.F.); +#70293 = EDGE_CURVE('',#70277,#70286,#70294,.T.); +#70294 = LINE('',#70295,#70296); +#70295 = CARTESIAN_POINT('',(-1.195,-3.E-02,1.285)); +#70296 = VECTOR('',#70297,1.); +#70297 = DIRECTION('',(1.E-16,-8.9E-16,-1.)); +#70298 = PLANE('',#70299); +#70299 = AXIS2_PLACEMENT_3D('',#70300,#70301,#70302); +#70300 = CARTESIAN_POINT('',(-1.195,-0.23,1.285)); +#70301 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#70302 = DIRECTION('',(-1.E-16,8.9E-16,1.)); +#70303 = ADVANCED_FACE('',(#70304),#70310,.F.); +#70304 = FACE_BOUND('',#70305,.T.); +#70305 = EDGE_LOOP('',(#70306,#70307,#70308,#70309)); +#70306 = ORIENTED_EDGE('',*,*,#69681,.F.); +#70307 = ORIENTED_EDGE('',*,*,#69657,.T.); +#70308 = ORIENTED_EDGE('',*,*,#69590,.T.); +#70309 = ORIENTED_EDGE('',*,*,#69268,.F.); +#70310 = PLANE('',#70311); +#70311 = AXIS2_PLACEMENT_3D('',#70312,#70313,#70314); +#70312 = CARTESIAN_POINT('',(2.361607260739,-5.435,0.879662667505)); +#70313 = DIRECTION('',(0.422618261741,-1.179999999999E-15, + -0.906307787037)); +#70314 = DIRECTION('',(-7.185615334283E-16,-1.,9.669151984819E-16)); +#70315 = ADVANCED_FACE('',(#70316),#70322,.F.); +#70316 = FACE_BOUND('',#70317,.F.); +#70317 = EDGE_LOOP('',(#70318,#70319,#70320,#70321)); +#70318 = ORIENTED_EDGE('',*,*,#69640,.F.); +#70319 = ORIENTED_EDGE('',*,*,#69616,.T.); +#70320 = ORIENTED_EDGE('',*,*,#69566,.T.); +#70321 = ORIENTED_EDGE('',*,*,#69282,.F.); +#70322 = PLANE('',#70323); +#70323 = AXIS2_PLACEMENT_3D('',#70324,#70325,#70326); +#70324 = CARTESIAN_POINT('',(3.588392739261,-5.435,0.879662667505)); +#70325 = DIRECTION('',(-0.422618261741,-1.09E-15,-0.906307787037)); +#70326 = DIRECTION('',(-4.998192528061E-16,1.,-9.696123863918E-16)); +#70327 = ADVANCED_FACE('',(#70328),#70353,.F.); +#70328 = FACE_BOUND('',#70329,.F.); +#70329 = EDGE_LOOP('',(#70330,#70338,#70339,#70347)); +#70330 = ORIENTED_EDGE('',*,*,#70331,.F.); +#70331 = EDGE_CURVE('',#69409,#70332,#70334,.T.); +#70332 = VERTEX_POINT('',#70333); +#70333 = CARTESIAN_POINT('',(7.145,-3.E-02,1.285)); +#70334 = LINE('',#70335,#70336); +#70335 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#70336 = VECTOR('',#70337,1.); +#70337 = DIRECTION('',(0.,1.,-2.2E-16)); +#70338 = ORIENTED_EDGE('',*,*,#69416,.T.); +#70339 = ORIENTED_EDGE('',*,*,#70340,.T.); +#70340 = EDGE_CURVE('',#69417,#70341,#70343,.T.); +#70341 = VERTEX_POINT('',#70342); +#70342 = CARTESIAN_POINT('',(7.145,-3.E-02,0.885)); +#70343 = LINE('',#70344,#70345); +#70344 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#70345 = VECTOR('',#70346,1.); +#70346 = DIRECTION('',(0.,1.,-8.9E-16)); +#70347 = ORIENTED_EDGE('',*,*,#70348,.F.); +#70348 = EDGE_CURVE('',#70332,#70341,#70349,.T.); +#70349 = LINE('',#70350,#70351); +#70350 = CARTESIAN_POINT('',(7.145,-3.E-02,1.285)); +#70351 = VECTOR('',#70352,1.); +#70352 = DIRECTION('',(1.2E-16,-8.9E-16,-1.)); +#70353 = PLANE('',#70354); +#70354 = AXIS2_PLACEMENT_3D('',#70355,#70356,#70357); +#70355 = CARTESIAN_POINT('',(7.145,-0.23,1.285)); +#70356 = DIRECTION('',(1.,0.,1.2E-16)); +#70357 = DIRECTION('',(1.2E-16,-8.9E-16,-1.)); +#70358 = ADVANCED_FACE('',(#70359),#70362,.F.); +#70359 = FACE_BOUND('',#70360,.T.); +#70360 = EDGE_LOOP('',(#70361)); +#70361 = ORIENTED_EDGE('',*,*,#69707,.T.); +#70362 = PLANE('',#70363); +#70363 = AXIS2_PLACEMENT_3D('',#70364,#70365,#70366); +#70364 = CARTESIAN_POINT('',(0.785,-2.85,-1.E-02)); +#70365 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70366 = DIRECTION('',(1.,-2.2E-16,2.2E-16)); +#70367 = ADVANCED_FACE('',(#70368),#70371,.F.); +#70368 = FACE_BOUND('',#70369,.F.); +#70369 = EDGE_LOOP('',(#70370)); +#70370 = ORIENTED_EDGE('',*,*,#69722,.T.); +#70371 = PLANE('',#70372); +#70372 = AXIS2_PLACEMENT_3D('',#70373,#70374,#70375); +#70373 = CARTESIAN_POINT('',(5.165,-2.85,-1.E-02)); +#70374 = DIRECTION('',(0.,2.2E-16,1.)); +#70375 = DIRECTION('',(1.,0.,-0.)); +#70376 = ADVANCED_FACE('',(#70377),#70388,.F.); +#70377 = FACE_BOUND('',#70378,.T.); +#70378 = EDGE_LOOP('',(#70379,#70380,#70381,#70382)); +#70379 = ORIENTED_EDGE('',*,*,#70285,.F.); +#70380 = ORIENTED_EDGE('',*,*,#69766,.T.); +#70381 = ORIENTED_EDGE('',*,*,#69804,.T.); +#70382 = ORIENTED_EDGE('',*,*,#70383,.F.); +#70383 = EDGE_CURVE('',#70286,#69805,#70384,.T.); +#70384 = LINE('',#70385,#70386); +#70385 = CARTESIAN_POINT('',(-1.195,-3.E-02,0.885)); +#70386 = VECTOR('',#70387,1.); +#70387 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#70388 = PLANE('',#70389); +#70389 = AXIS2_PLACEMENT_3D('',#70390,#70391,#70392); +#70390 = CARTESIAN_POINT('',(-1.195,-0.23,0.885)); +#70391 = DIRECTION('',(-1.E-16,2.2E-16,1.)); +#70392 = DIRECTION('',(1.,-2.2E-16,1.E-16)); +#70393 = ADVANCED_FACE('',(#70394),#70405,.F.); +#70394 = FACE_BOUND('',#70395,.T.); +#70395 = EDGE_LOOP('',(#70396,#70397,#70398,#70399)); +#70396 = ORIENTED_EDGE('',*,*,#69813,.F.); +#70397 = ORIENTED_EDGE('',*,*,#69855,.T.); +#70398 = ORIENTED_EDGE('',*,*,#70276,.T.); +#70399 = ORIENTED_EDGE('',*,*,#70400,.F.); +#70400 = EDGE_CURVE('',#69814,#70277,#70401,.T.); +#70401 = LINE('',#70402,#70403); +#70402 = CARTESIAN_POINT('',(-1.495,-3.E-02,1.285)); +#70403 = VECTOR('',#70404,1.); +#70404 = DIRECTION('',(1.,-2.2E-16,1.E-16)); +#70405 = PLANE('',#70406); +#70406 = AXIS2_PLACEMENT_3D('',#70407,#70408,#70409); +#70407 = CARTESIAN_POINT('',(-1.495,-0.23,1.285)); +#70408 = DIRECTION('',(1.E-16,-2.2E-16,-1.)); +#70409 = DIRECTION('',(-1.,2.2E-16,-1.E-16)); +#70410 = ADVANCED_FACE('',(#70411),#70438,.T.); +#70411 = FACE_BOUND('',#70412,.T.); +#70412 = EDGE_LOOP('',(#70413,#70414,#70423,#70431)); +#70413 = ORIENTED_EDGE('',*,*,#69821,.T.); +#70414 = ORIENTED_EDGE('',*,*,#70415,.T.); +#70415 = EDGE_CURVE('',#69814,#70416,#70418,.T.); +#70416 = VERTEX_POINT('',#70417); +#70417 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,1.285)); +#70418 = CIRCLE('',#70419,0.45); +#70419 = AXIS2_PLACEMENT_3D('',#70420,#70421,#70422); +#70420 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,1.285)); +#70421 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70422 = DIRECTION('',(-1.,-5.109E-14,-2.2E-16)); +#70423 = ORIENTED_EDGE('',*,*,#70424,.F.); +#70424 = EDGE_CURVE('',#70425,#70416,#70427,.T.); +#70425 = VERTEX_POINT('',#70426); +#70426 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,0.885)); +#70427 = LINE('',#70428,#70429); +#70428 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,0.885)); +#70429 = VECTOR('',#70430,1.); +#70430 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70431 = ORIENTED_EDGE('',*,*,#70432,.F.); +#70432 = EDGE_CURVE('',#69805,#70425,#70433,.T.); +#70433 = CIRCLE('',#70434,0.45); +#70434 = AXIS2_PLACEMENT_3D('',#70435,#70436,#70437); +#70435 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,0.885)); +#70436 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70437 = DIRECTION('',(-1.,-5.109E-14,-2.2E-16)); +#70438 = CYLINDRICAL_SURFACE('',#70439,0.45); +#70439 = AXIS2_PLACEMENT_3D('',#70440,#70441,#70442); +#70440 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,0.885)); +#70441 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70442 = DIRECTION('',(-1.,-5.109E-14,-2.2E-16)); +#70443 = ADVANCED_FACE('',(#70444),#70455,.F.); +#70444 = FACE_BOUND('',#70445,.F.); +#70445 = EDGE_LOOP('',(#70446,#70447,#70448,#70449)); +#70446 = ORIENTED_EDGE('',*,*,#70340,.F.); +#70447 = ORIENTED_EDGE('',*,*,#70144,.T.); +#70448 = ORIENTED_EDGE('',*,*,#70182,.T.); +#70449 = ORIENTED_EDGE('',*,*,#70450,.F.); +#70450 = EDGE_CURVE('',#70341,#70183,#70451,.T.); +#70451 = LINE('',#70452,#70453); +#70452 = CARTESIAN_POINT('',(7.145,-3.E-02,0.885)); +#70453 = VECTOR('',#70454,1.); +#70454 = DIRECTION('',(1.,0.,1.2E-16)); +#70455 = PLANE('',#70456); +#70456 = AXIS2_PLACEMENT_3D('',#70457,#70458,#70459); +#70457 = CARTESIAN_POINT('',(7.145,-0.23,0.885)); +#70458 = DIRECTION('',(-1.2E-16,2.2E-16,1.)); +#70459 = DIRECTION('',(1.,0.,1.2E-16)); +#70460 = ADVANCED_FACE('',(#70461),#70472,.F.); +#70461 = FACE_BOUND('',#70462,.F.); +#70462 = EDGE_LOOP('',(#70463,#70464,#70465,#70466)); +#70463 = ORIENTED_EDGE('',*,*,#70191,.F.); +#70464 = ORIENTED_EDGE('',*,*,#70238,.T.); +#70465 = ORIENTED_EDGE('',*,*,#70331,.T.); +#70466 = ORIENTED_EDGE('',*,*,#70467,.F.); +#70467 = EDGE_CURVE('',#70192,#70332,#70468,.T.); +#70468 = LINE('',#70469,#70470); +#70469 = CARTESIAN_POINT('',(7.445,-3.E-02,1.285)); +#70470 = VECTOR('',#70471,1.); +#70471 = DIRECTION('',(-1.,-0.,-1.2E-16)); +#70472 = PLANE('',#70473); +#70473 = AXIS2_PLACEMENT_3D('',#70474,#70475,#70476); +#70474 = CARTESIAN_POINT('',(7.445,-0.23,1.285)); +#70475 = DIRECTION('',(1.2E-16,-2.2E-16,-1.)); +#70476 = DIRECTION('',(-1.,0.,-1.2E-16)); +#70477 = ADVANCED_FACE('',(#70478),#70505,.T.); +#70478 = FACE_BOUND('',#70479,.T.); +#70479 = EDGE_LOOP('',(#70480,#70489,#70497,#70504)); +#70480 = ORIENTED_EDGE('',*,*,#70481,.T.); +#70481 = EDGE_CURVE('',#70183,#70482,#70484,.T.); +#70482 = VERTEX_POINT('',#70483); +#70483 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,0.885)); +#70484 = CIRCLE('',#70485,0.45); +#70485 = AXIS2_PLACEMENT_3D('',#70486,#70487,#70488); +#70486 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,0.885)); +#70487 = DIRECTION('',(1.660794737852E-46,2.2E-16,1.)); +#70488 = DIRECTION('',(1.,-5.132E-14,1.12904E-29)); +#70489 = ORIENTED_EDGE('',*,*,#70490,.T.); +#70490 = EDGE_CURVE('',#70482,#70491,#70493,.T.); +#70491 = VERTEX_POINT('',#70492); +#70492 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,1.285)); +#70493 = LINE('',#70494,#70495); +#70494 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,0.885)); +#70495 = VECTOR('',#70496,1.); +#70496 = DIRECTION('',(0.,2.2E-16,1.)); +#70497 = ORIENTED_EDGE('',*,*,#70498,.F.); +#70498 = EDGE_CURVE('',#70192,#70491,#70499,.T.); +#70499 = CIRCLE('',#70500,0.45); +#70500 = AXIS2_PLACEMENT_3D('',#70501,#70502,#70503); +#70501 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,1.285)); +#70502 = DIRECTION('',(1.660794737852E-46,2.2E-16,1.)); +#70503 = DIRECTION('',(1.,-5.132E-14,1.12904E-29)); +#70504 = ORIENTED_EDGE('',*,*,#70199,.F.); +#70505 = CYLINDRICAL_SURFACE('',#70506,0.45); +#70506 = AXIS2_PLACEMENT_3D('',#70507,#70508,#70509); +#70507 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,0.885)); +#70508 = DIRECTION('',(0.,2.2E-16,1.)); +#70509 = DIRECTION('',(1.,-5.132E-14,1.12904E-29)); +#70510 = ADVANCED_FACE('',(#70511),#70538,.F.); +#70511 = FACE_BOUND('',#70512,.F.); +#70512 = EDGE_LOOP('',(#70513,#70522,#70530,#70537)); +#70513 = ORIENTED_EDGE('',*,*,#70514,.T.); +#70514 = EDGE_CURVE('',#70277,#70515,#70517,.T.); +#70515 = VERTEX_POINT('',#70516); +#70516 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,1.285)); +#70517 = CIRCLE('',#70518,0.15); +#70518 = AXIS2_PLACEMENT_3D('',#70519,#70520,#70521); +#70519 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,1.285)); +#70520 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70521 = DIRECTION('',(-1.,-1.5373E-13,-2.2E-16)); +#70522 = ORIENTED_EDGE('',*,*,#70523,.T.); +#70523 = EDGE_CURVE('',#70515,#70524,#70526,.T.); +#70524 = VERTEX_POINT('',#70525); +#70525 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,0.885)); +#70526 = LINE('',#70527,#70528); +#70527 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,1.285)); +#70528 = VECTOR('',#70529,1.); +#70529 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70530 = ORIENTED_EDGE('',*,*,#70531,.F.); +#70531 = EDGE_CURVE('',#70286,#70524,#70532,.T.); +#70532 = CIRCLE('',#70533,0.15); +#70533 = AXIS2_PLACEMENT_3D('',#70534,#70535,#70536); +#70534 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,0.885)); +#70535 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70536 = DIRECTION('',(-1.,-1.5373E-13,-2.2E-16)); +#70537 = ORIENTED_EDGE('',*,*,#70293,.F.); +#70538 = CYLINDRICAL_SURFACE('',#70539,0.15); +#70539 = AXIS2_PLACEMENT_3D('',#70540,#70541,#70542); +#70540 = CARTESIAN_POINT('',(-1.045,-2.999999999998E-02,1.285)); +#70541 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70542 = DIRECTION('',(-1.,-1.5373E-13,-2.2E-16)); +#70543 = ADVANCED_FACE('',(#70544),#70571,.F.); +#70544 = FACE_BOUND('',#70545,.F.); +#70545 = EDGE_LOOP('',(#70546,#70547,#70556,#70564)); +#70546 = ORIENTED_EDGE('',*,*,#70348,.T.); +#70547 = ORIENTED_EDGE('',*,*,#70548,.T.); +#70548 = EDGE_CURVE('',#70341,#70549,#70551,.T.); +#70549 = VERTEX_POINT('',#70550); +#70550 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,0.885)); +#70551 = CIRCLE('',#70552,0.15); +#70552 = AXIS2_PLACEMENT_3D('',#70553,#70554,#70555); +#70553 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,0.885)); +#70554 = DIRECTION('',(1.56131228953E-46,2.2E-16,1.)); +#70555 = DIRECTION('',(1.,-1.5395E-13,3.3869E-29)); +#70556 = ORIENTED_EDGE('',*,*,#70557,.F.); +#70557 = EDGE_CURVE('',#70558,#70549,#70560,.T.); +#70558 = VERTEX_POINT('',#70559); +#70559 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,1.285)); +#70560 = LINE('',#70561,#70562); +#70561 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,1.285)); +#70562 = VECTOR('',#70563,1.); +#70563 = DIRECTION('',(0.,-2.2E-16,-1.)); +#70564 = ORIENTED_EDGE('',*,*,#70565,.F.); +#70565 = EDGE_CURVE('',#70332,#70558,#70566,.T.); +#70566 = CIRCLE('',#70567,0.15); +#70567 = AXIS2_PLACEMENT_3D('',#70568,#70569,#70570); +#70568 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,1.285)); +#70569 = DIRECTION('',(1.56131228953E-46,2.2E-16,1.)); +#70570 = DIRECTION('',(1.,-1.5395E-13,3.3869E-29)); +#70571 = CYLINDRICAL_SURFACE('',#70572,0.15); +#70572 = AXIS2_PLACEMENT_3D('',#70573,#70574,#70575); +#70573 = CARTESIAN_POINT('',(6.995,-2.999999999998E-02,1.285)); +#70574 = DIRECTION('',(0.,-2.2E-16,-1.)); +#70575 = DIRECTION('',(1.,-1.5395E-13,3.3869E-29)); +#70576 = ADVANCED_FACE('',(#70577),#70588,.T.); +#70577 = FACE_BOUND('',#70578,.F.); +#70578 = EDGE_LOOP('',(#70579,#70580,#70586,#70587)); +#70579 = ORIENTED_EDGE('',*,*,#70531,.T.); +#70580 = ORIENTED_EDGE('',*,*,#70581,.T.); +#70581 = EDGE_CURVE('',#70524,#70425,#70582,.T.); +#70582 = LINE('',#70583,#70584); +#70583 = CARTESIAN_POINT('',(-1.067571085516,0.118292097222,0.885)); +#70584 = VECTOR('',#70585,1.); +#70585 = DIRECTION('',(-0.15047390344,0.988613981483,-1.3E-16)); +#70586 = ORIENTED_EDGE('',*,*,#70432,.F.); +#70587 = ORIENTED_EDGE('',*,*,#70383,.F.); +#70588 = PLANE('',#70589); +#70589 = AXIS2_PLACEMENT_3D('',#70590,#70591,#70592); +#70590 = CARTESIAN_POINT('',(-1.272533130895,0.165521544453,0.885)); +#70591 = DIRECTION('',(2.2E-16,-2.2E-16,-1.)); +#70592 = DIRECTION('',(-0.651738481509,-0.758443769649, + 2.347516339081E-17)); +#70593 = ADVANCED_FACE('',(#70594),#70605,.T.); +#70594 = FACE_BOUND('',#70595,.F.); +#70595 = EDGE_LOOP('',(#70596,#70597,#70603,#70604)); +#70596 = ORIENTED_EDGE('',*,*,#70415,.T.); +#70597 = ORIENTED_EDGE('',*,*,#70598,.T.); +#70598 = EDGE_CURVE('',#70416,#70515,#70599,.T.); +#70599 = LINE('',#70600,#70601); +#70600 = CARTESIAN_POINT('',(-1.112713256548,0.414876291667,1.285)); +#70601 = VECTOR('',#70602,1.); +#70602 = DIRECTION('',(0.15047390344,-0.988613981483,1.3E-16)); +#70603 = ORIENTED_EDGE('',*,*,#70514,.F.); +#70604 = ORIENTED_EDGE('',*,*,#70400,.F.); +#70605 = PLANE('',#70606); +#70606 = AXIS2_PLACEMENT_3D('',#70607,#70608,#70609); +#70607 = CARTESIAN_POINT('',(-1.272533130895,0.165521544453,1.285)); +#70608 = DIRECTION('',(-2.2E-16,2.2E-16,1.)); +#70609 = DIRECTION('',(-0.651738481509,-0.758443769649, + 2.347516339081E-17)); +#70610 = ADVANCED_FACE('',(#70611),#70636,.F.); +#70611 = FACE_BOUND('',#70612,.T.); +#70612 = EDGE_LOOP('',(#70613,#70621,#70622,#70630)); +#70613 = ORIENTED_EDGE('',*,*,#70614,.F.); +#70614 = EDGE_CURVE('',#70425,#70615,#70617,.T.); +#70615 = VERTEX_POINT('',#70616); +#70616 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70617 = LINE('',#70618,#70619); +#70618 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70619 = VECTOR('',#70620,1.); +#70620 = DIRECTION('',(0.988613981483,0.15047390344,1.9E-16)); +#70621 = ORIENTED_EDGE('',*,*,#70424,.T.); +#70622 = ORIENTED_EDGE('',*,*,#70623,.T.); +#70623 = EDGE_CURVE('',#70416,#70624,#70626,.T.); +#70624 = VERTEX_POINT('',#70625); +#70625 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70626 = LINE('',#70627,#70628); +#70627 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70628 = VECTOR('',#70629,1.); +#70629 = DIRECTION('',(0.988613981483,0.15047390344,1.9E-16)); +#70630 = ORIENTED_EDGE('',*,*,#70631,.F.); +#70631 = EDGE_CURVE('',#70615,#70624,#70632,.T.); +#70632 = LINE('',#70633,#70634); +#70633 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70634 = VECTOR('',#70635,1.); +#70635 = DIRECTION('',(5.6E-16,1.1E-16,1.)); +#70636 = PLANE('',#70637); +#70637 = AXIS2_PLACEMENT_3D('',#70638,#70639,#70640); +#70638 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,0.885)); +#70639 = DIRECTION('',(0.15047390344,-0.988613981483,2.E-17)); +#70640 = DIRECTION('',(-5.606744469128E-16,-1.055688818294E-16,-1.)); +#70641 = ADVANCED_FACE('',(#70642),#70653,.T.); +#70642 = FACE_BOUND('',#70643,.T.); +#70643 = EDGE_LOOP('',(#70644,#70645,#70651,#70652)); +#70644 = ORIENTED_EDGE('',*,*,#70548,.T.); +#70645 = ORIENTED_EDGE('',*,*,#70646,.T.); +#70646 = EDGE_CURVE('',#70549,#70482,#70647,.T.); +#70647 = LINE('',#70648,#70649); +#70648 = CARTESIAN_POINT('',(7.017571085516,0.118292097222,0.885)); +#70649 = VECTOR('',#70650,1.); +#70650 = DIRECTION('',(0.15047390344,0.988613981483,-9.999999999999E-17) + ); +#70651 = ORIENTED_EDGE('',*,*,#70481,.F.); +#70652 = ORIENTED_EDGE('',*,*,#70450,.F.); +#70653 = PLANE('',#70654); +#70654 = AXIS2_PLACEMENT_3D('',#70655,#70656,#70657); +#70655 = CARTESIAN_POINT('',(7.222533130895,0.165521544453,0.885)); +#70656 = DIRECTION('',(0.,-2.2E-16,-1.)); +#70657 = DIRECTION('',(-0.651738481509,0.758443769649, + -1.668576293229E-16)); +#70658 = ADVANCED_FACE('',(#70659),#70670,.T.); +#70659 = FACE_BOUND('',#70660,.T.); +#70660 = EDGE_LOOP('',(#70661,#70662,#70668,#70669)); +#70661 = ORIENTED_EDGE('',*,*,#70498,.T.); +#70662 = ORIENTED_EDGE('',*,*,#70663,.T.); +#70663 = EDGE_CURVE('',#70491,#70558,#70664,.T.); +#70664 = LINE('',#70665,#70666); +#70665 = CARTESIAN_POINT('',(7.062713256548,0.414876291667,1.285)); +#70666 = VECTOR('',#70667,1.); +#70667 = DIRECTION('',(-0.15047390344,-0.988613981483,9.999999999999E-17 + )); +#70668 = ORIENTED_EDGE('',*,*,#70565,.F.); +#70669 = ORIENTED_EDGE('',*,*,#70467,.F.); +#70670 = PLANE('',#70671); +#70671 = AXIS2_PLACEMENT_3D('',#70672,#70673,#70674); +#70672 = CARTESIAN_POINT('',(7.222533130895,0.165521544453,1.285)); +#70673 = DIRECTION('',(0.,2.2E-16,1.)); +#70674 = DIRECTION('',(-0.651738481509,0.758443769649, + -1.668576293229E-16)); +#70675 = ADVANCED_FACE('',(#70676),#70701,.F.); +#70676 = FACE_BOUND('',#70677,.F.); +#70677 = EDGE_LOOP('',(#70678,#70686,#70687,#70695)); +#70678 = ORIENTED_EDGE('',*,*,#70679,.F.); +#70679 = EDGE_CURVE('',#70482,#70680,#70682,.T.); +#70680 = VERTEX_POINT('',#70681); +#70681 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70682 = LINE('',#70683,#70684); +#70683 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70684 = VECTOR('',#70685,1.); +#70685 = DIRECTION('',(-0.988613981483,0.15047390344,-3.E-17)); +#70686 = ORIENTED_EDGE('',*,*,#70490,.T.); +#70687 = ORIENTED_EDGE('',*,*,#70688,.T.); +#70688 = EDGE_CURVE('',#70491,#70689,#70691,.T.); +#70689 = VERTEX_POINT('',#70690); +#70690 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70691 = LINE('',#70692,#70693); +#70692 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70693 = VECTOR('',#70694,1.); +#70694 = DIRECTION('',(-0.988613981483,0.15047390344,-3.E-17)); +#70695 = ORIENTED_EDGE('',*,*,#70696,.F.); +#70696 = EDGE_CURVE('',#70680,#70689,#70697,.T.); +#70697 = LINE('',#70698,#70699); +#70698 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70699 = VECTOR('',#70700,1.); +#70700 = DIRECTION('',(-7.9E-16,1.1E-16,1.)); +#70701 = PLANE('',#70702); +#70702 = AXIS2_PLACEMENT_3D('',#70703,#70704,#70705); +#70703 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,0.885)); +#70704 = DIRECTION('',(-0.15047390344,-0.988613981483, + -9.999999999999E-18)); +#70705 = DIRECTION('',(-7.899809130242E-16,1.101254014864E-16,1.)); +#70706 = ADVANCED_FACE('',(#70707),#70732,.F.); +#70707 = FACE_BOUND('',#70708,.T.); +#70708 = EDGE_LOOP('',(#70709,#70717,#70718,#70726)); +#70709 = ORIENTED_EDGE('',*,*,#70710,.F.); +#70710 = EDGE_CURVE('',#70515,#70711,#70713,.T.); +#70711 = VERTEX_POINT('',#70712); +#70712 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70713 = LINE('',#70714,#70715); +#70714 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70715 = VECTOR('',#70716,1.); +#70716 = DIRECTION('',(0.988613981483,0.15047390344,1.9E-16)); +#70717 = ORIENTED_EDGE('',*,*,#70523,.T.); +#70718 = ORIENTED_EDGE('',*,*,#70719,.T.); +#70719 = EDGE_CURVE('',#70524,#70720,#70722,.T.); +#70720 = VERTEX_POINT('',#70721); +#70721 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70722 = LINE('',#70723,#70724); +#70723 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70724 = VECTOR('',#70725,1.); +#70725 = DIRECTION('',(0.988613981483,0.15047390344,-5.7E-16)); +#70726 = ORIENTED_EDGE('',*,*,#70727,.F.); +#70727 = EDGE_CURVE('',#70711,#70720,#70728,.T.); +#70728 = LINE('',#70729,#70730); +#70729 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70730 = VECTOR('',#70731,1.); +#70731 = DIRECTION('',(-5.6E-16,-1.1E-16,-1.)); +#70732 = PLANE('',#70733); +#70733 = AXIS2_PLACEMENT_3D('',#70734,#70735,#70736); +#70734 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,1.285)); +#70735 = DIRECTION('',(-0.15047390344,0.988613981483,-2.E-17)); +#70736 = DIRECTION('',(5.606744469128E-16,1.055688818294E-16,1.)); +#70737 = ADVANCED_FACE('',(#70738),#70763,.F.); +#70738 = FACE_BOUND('',#70739,.F.); +#70739 = EDGE_LOOP('',(#70740,#70748,#70749,#70757)); +#70740 = ORIENTED_EDGE('',*,*,#70741,.F.); +#70741 = EDGE_CURVE('',#70558,#70742,#70744,.T.); +#70742 = VERTEX_POINT('',#70743); +#70743 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70744 = LINE('',#70745,#70746); +#70745 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70746 = VECTOR('',#70747,1.); +#70747 = DIRECTION('',(-0.988613981483,0.15047390344,-3.E-17)); +#70748 = ORIENTED_EDGE('',*,*,#70557,.T.); +#70749 = ORIENTED_EDGE('',*,*,#70750,.T.); +#70750 = EDGE_CURVE('',#70549,#70751,#70753,.T.); +#70751 = VERTEX_POINT('',#70752); +#70752 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70753 = LINE('',#70754,#70755); +#70754 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70755 = VECTOR('',#70756,1.); +#70756 = DIRECTION('',(-0.988613981483,0.15047390344,-7.899999999999E-16 + )); +#70757 = ORIENTED_EDGE('',*,*,#70758,.F.); +#70758 = EDGE_CURVE('',#70742,#70751,#70759,.T.); +#70759 = LINE('',#70760,#70761); +#70760 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70761 = VECTOR('',#70762,1.); +#70762 = DIRECTION('',(7.9E-16,-1.1E-16,-1.)); +#70763 = PLANE('',#70764); +#70764 = AXIS2_PLACEMENT_3D('',#70765,#70766,#70767); +#70765 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,1.285)); +#70766 = DIRECTION('',(0.15047390344,0.988613981483,9.999999999999E-18) + ); +#70767 = DIRECTION('',(7.899809130242E-16,-1.101254014864E-16,-1.)); +#70768 = ADVANCED_FACE('',(#70769),#70780,.F.); +#70769 = FACE_BOUND('',#70770,.T.); +#70770 = EDGE_LOOP('',(#70771,#70772,#70773,#70774)); +#70771 = ORIENTED_EDGE('',*,*,#70719,.F.); +#70772 = ORIENTED_EDGE('',*,*,#70581,.T.); +#70773 = ORIENTED_EDGE('',*,*,#70614,.T.); +#70774 = ORIENTED_EDGE('',*,*,#70775,.F.); +#70775 = EDGE_CURVE('',#70720,#70615,#70776,.T.); +#70776 = LINE('',#70777,#70778); +#70777 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70778 = VECTOR('',#70779,1.); +#70779 = DIRECTION('',(-0.15047390344,0.988613981483,-2.E-17)); +#70780 = PLANE('',#70781); +#70781 = AXIS2_PLACEMENT_3D('',#70782,#70783,#70784); +#70782 = CARTESIAN_POINT('',(-0.322428914484,0.231707902778,0.885)); +#70783 = DIRECTION('',(-1.9E-16,-1.E-17,1.)); +#70784 = DIRECTION('',(0.15047390344,-0.988613981483,1.870390183877E-17) + ); +#70785 = ADVANCED_FACE('',(#70786),#70797,.F.); +#70786 = FACE_BOUND('',#70787,.T.); +#70787 = EDGE_LOOP('',(#70788,#70789,#70790,#70791)); +#70788 = ORIENTED_EDGE('',*,*,#70623,.F.); +#70789 = ORIENTED_EDGE('',*,*,#70598,.T.); +#70790 = ORIENTED_EDGE('',*,*,#70710,.T.); +#70791 = ORIENTED_EDGE('',*,*,#70792,.F.); +#70792 = EDGE_CURVE('',#70624,#70711,#70793,.T.); +#70793 = LINE('',#70794,#70795); +#70794 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70795 = VECTOR('',#70796,1.); +#70796 = DIRECTION('',(0.15047390344,-0.988613981483,2.E-17)); +#70797 = PLANE('',#70798); +#70798 = AXIS2_PLACEMENT_3D('',#70799,#70800,#70801); +#70799 = CARTESIAN_POINT('',(-0.367571085516,0.528292097222,1.285)); +#70800 = DIRECTION('',(1.9E-16,1.E-17,-1.)); +#70801 = DIRECTION('',(-0.15047390344,0.988613981483,-1.870390183877E-17 + )); +#70802 = ADVANCED_FACE('',(#70803),#70809,.F.); +#70803 = FACE_BOUND('',#70804,.T.); +#70804 = EDGE_LOOP('',(#70805,#70806,#70807,#70808)); +#70805 = ORIENTED_EDGE('',*,*,#70792,.T.); +#70806 = ORIENTED_EDGE('',*,*,#70727,.T.); +#70807 = ORIENTED_EDGE('',*,*,#70775,.T.); +#70808 = ORIENTED_EDGE('',*,*,#70631,.T.); +#70809 = PLANE('',#70810); +#70810 = AXIS2_PLACEMENT_3D('',#70811,#70812,#70813); +#70811 = CARTESIAN_POINT('',(-0.345,0.38,1.085)); +#70812 = DIRECTION('',(-0.988613981483,-0.15047390344,4.4E-16)); +#70813 = DIRECTION('',(-0.15047390344,0.988613981483,-2.5E-16)); +#70814 = ADVANCED_FACE('',(#70815),#70826,.F.); +#70815 = FACE_BOUND('',#70816,.F.); +#70816 = EDGE_LOOP('',(#70817,#70818,#70819,#70820)); +#70817 = ORIENTED_EDGE('',*,*,#70750,.F.); +#70818 = ORIENTED_EDGE('',*,*,#70646,.T.); +#70819 = ORIENTED_EDGE('',*,*,#70679,.T.); +#70820 = ORIENTED_EDGE('',*,*,#70821,.F.); +#70821 = EDGE_CURVE('',#70751,#70680,#70822,.T.); +#70822 = LINE('',#70823,#70824); +#70823 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70824 = VECTOR('',#70825,1.); +#70825 = DIRECTION('',(0.15047390344,0.988613981483,9.999999999999E-18) + ); +#70826 = PLANE('',#70827); +#70827 = AXIS2_PLACEMENT_3D('',#70828,#70829,#70830); +#70828 = CARTESIAN_POINT('',(6.272428914484,0.231707902778,0.885)); +#70829 = DIRECTION('',(-3.E-17,-1.E-17,1.)); +#70830 = DIRECTION('',(0.15047390344,0.988613981483,1.440035691803E-17) + ); +#70831 = ADVANCED_FACE('',(#70832),#70843,.F.); +#70832 = FACE_BOUND('',#70833,.F.); +#70833 = EDGE_LOOP('',(#70834,#70835,#70836,#70837)); +#70834 = ORIENTED_EDGE('',*,*,#70688,.F.); +#70835 = ORIENTED_EDGE('',*,*,#70663,.T.); +#70836 = ORIENTED_EDGE('',*,*,#70741,.T.); +#70837 = ORIENTED_EDGE('',*,*,#70838,.F.); +#70838 = EDGE_CURVE('',#70689,#70742,#70839,.T.); +#70839 = LINE('',#70840,#70841); +#70840 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70841 = VECTOR('',#70842,1.); +#70842 = DIRECTION('',(-0.15047390344,-0.988613981483, + -9.999999999999E-18)); +#70843 = PLANE('',#70844); +#70844 = AXIS2_PLACEMENT_3D('',#70845,#70846,#70847); +#70845 = CARTESIAN_POINT('',(6.317571085516,0.528292097222,1.285)); +#70846 = DIRECTION('',(3.E-17,1.E-17,-1.)); +#70847 = DIRECTION('',(-0.15047390344,-0.988613981483, + -1.440035691803E-17)); +#70848 = ADVANCED_FACE('',(#70849),#70855,.F.); +#70849 = FACE_BOUND('',#70850,.F.); +#70850 = EDGE_LOOP('',(#70851,#70852,#70853,#70854)); +#70851 = ORIENTED_EDGE('',*,*,#70838,.T.); +#70852 = ORIENTED_EDGE('',*,*,#70758,.T.); +#70853 = ORIENTED_EDGE('',*,*,#70821,.T.); +#70854 = ORIENTED_EDGE('',*,*,#70696,.T.); +#70855 = PLANE('',#70856); +#70856 = AXIS2_PLACEMENT_3D('',#70857,#70858,#70859); +#70857 = CARTESIAN_POINT('',(6.295,0.38,1.085)); +#70858 = DIRECTION('',(0.988613981483,-0.15047390344,6.6E-16)); +#70859 = DIRECTION('',(-0.15047390344,-0.988613981483,2.2E-16)); +#70860 = MANIFOLD_SOLID_BREP('',#70861); +#70861 = CLOSED_SHELL('',(#70862,#70950,#71000,#71143,#71183,#71222, + #71253,#71290,#71307,#71339,#71418,#71449,#71480,#71617,#71646, + #71671,#71701,#71732,#71763,#71796,#71827,#71843,#71860,#71892, + #71972,#72003,#72050,#72081,#72128,#72159,#72222,#72253,#72316, + #72347,#72394,#72425,#72472,#72503,#72584,#72606,#72628,#72640, + #72657,#72674,#72696,#72708,#72735,#72752,#72769,#72786,#72808, + #72829,#72846,#72863,#72880,#72901,#72918,#72930,#72948,#72971, + #72989,#73005,#73025,#73056,#73087,#73111,#73128,#73146,#73193, + #73224,#73248,#73272,#73289,#73301,#73325,#73364,#73395,#73432, + #73449,#73461,#73485,#73524,#73555,#73602,#73641,#73688,#73719, + #73766,#73797,#73844,#73875,#73922,#73961,#74008,#74039,#74076, + #74093,#74110,#74127,#74144,#74161,#74178,#74195,#74230,#74247, + #74264,#74282,#74300,#74317,#74335,#74348,#74372,#74411,#74442, + #74479,#74496,#74508,#74532,#74571,#74602,#74639,#74656,#74668, + #74685,#74699,#74711,#74736,#74748,#74768,#74814,#74845,#74876, + #74907,#74931,#74962,#74993,#75010,#75027,#75040,#75057,#75184, + #75215,#75246,#75263,#75280,#75292,#75323,#75354,#75371,#75388, + #75400)); +#70862 = ADVANCED_FACE('',(#70863),#70945,.T.); +#70863 = FACE_BOUND('',#70864,.T.); +#70864 = EDGE_LOOP('',(#70865,#70875,#70883,#70891,#70899,#70907,#70915, + #70923,#70931,#70939)); +#70865 = ORIENTED_EDGE('',*,*,#70866,.F.); +#70866 = EDGE_CURVE('',#70867,#70869,#70871,.T.); +#70867 = VERTEX_POINT('',#70868); +#70868 = CARTESIAN_POINT('',(7.145,-2.115,0.19)); +#70869 = VERTEX_POINT('',#70870); +#70870 = CARTESIAN_POINT('',(7.145,-2.115,1.589999946273)); +#70871 = LINE('',#70872,#70873); +#70872 = CARTESIAN_POINT('',(7.145,-2.115,0.19)); +#70873 = VECTOR('',#70874,1.); +#70874 = DIRECTION('',(0.,0.,1.)); +#70875 = ORIENTED_EDGE('',*,*,#70876,.F.); +#70876 = EDGE_CURVE('',#70877,#70867,#70879,.T.); +#70877 = VERTEX_POINT('',#70878); +#70878 = CARTESIAN_POINT('',(7.145,-0.1,0.19)); +#70879 = LINE('',#70880,#70881); +#70880 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#70881 = VECTOR('',#70882,1.); +#70882 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70883 = ORIENTED_EDGE('',*,*,#70884,.T.); +#70884 = EDGE_CURVE('',#70877,#70885,#70887,.T.); +#70885 = VERTEX_POINT('',#70886); +#70886 = CARTESIAN_POINT('',(7.145,-0.1,1.285)); +#70887 = LINE('',#70888,#70889); +#70888 = CARTESIAN_POINT('',(7.145,-0.1,-1.E-02)); +#70889 = VECTOR('',#70890,1.); +#70890 = DIRECTION('',(0.,0.,1.)); +#70891 = ORIENTED_EDGE('',*,*,#70892,.F.); +#70892 = EDGE_CURVE('',#70893,#70885,#70895,.T.); +#70893 = VERTEX_POINT('',#70894); +#70894 = CARTESIAN_POINT('',(7.145,-0.63,1.285)); +#70895 = LINE('',#70896,#70897); +#70896 = CARTESIAN_POINT('',(7.145,-0.63,1.285)); +#70897 = VECTOR('',#70898,1.); +#70898 = DIRECTION('',(0.,1.,2.2E-16)); +#70899 = ORIENTED_EDGE('',*,*,#70900,.F.); +#70900 = EDGE_CURVE('',#70901,#70893,#70903,.T.); +#70901 = VERTEX_POINT('',#70902); +#70902 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#70903 = LINE('',#70904,#70905); +#70904 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#70905 = VECTOR('',#70906,1.); +#70906 = DIRECTION('',(0.,0.,-1.)); +#70907 = ORIENTED_EDGE('',*,*,#70908,.T.); +#70908 = EDGE_CURVE('',#70901,#70909,#70911,.T.); +#70909 = VERTEX_POINT('',#70910); +#70910 = CARTESIAN_POINT('',(7.145,0.56,1.87)); +#70911 = LINE('',#70912,#70913); +#70912 = CARTESIAN_POINT('',(7.145,-0.63,1.87)); +#70913 = VECTOR('',#70914,1.); +#70914 = DIRECTION('',(0.,1.,2.2E-16)); +#70915 = ORIENTED_EDGE('',*,*,#70916,.T.); +#70916 = EDGE_CURVE('',#70909,#70917,#70919,.T.); +#70917 = VERTEX_POINT('',#70918); +#70918 = CARTESIAN_POINT('',(7.145,0.56,2.15)); +#70919 = LINE('',#70920,#70921); +#70920 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#70921 = VECTOR('',#70922,1.); +#70922 = DIRECTION('',(0.,0.,1.)); +#70923 = ORIENTED_EDGE('',*,*,#70924,.T.); +#70924 = EDGE_CURVE('',#70917,#70925,#70927,.T.); +#70925 = VERTEX_POINT('',#70926); +#70926 = CARTESIAN_POINT('',(7.145,-2.26,2.15)); +#70927 = LINE('',#70928,#70929); +#70928 = CARTESIAN_POINT('',(7.145,-0.44,2.15)); +#70929 = VECTOR('',#70930,1.); +#70930 = DIRECTION('',(0.,-1.,0.)); +#70931 = ORIENTED_EDGE('',*,*,#70932,.T.); +#70932 = EDGE_CURVE('',#70925,#70933,#70935,.T.); +#70933 = VERTEX_POINT('',#70934); +#70934 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#70935 = LINE('',#70936,#70937); +#70936 = CARTESIAN_POINT('',(7.145,-2.26,3.15)); +#70937 = VECTOR('',#70938,1.); +#70938 = DIRECTION('',(0.,2.2E-16,-1.)); +#70939 = ORIENTED_EDGE('',*,*,#70940,.T.); +#70940 = EDGE_CURVE('',#70933,#70869,#70941,.T.); +#70941 = LINE('',#70942,#70943); +#70942 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#70943 = VECTOR('',#70944,1.); +#70944 = DIRECTION('',(0.,1.,2.2E-16)); +#70945 = PLANE('',#70946); +#70946 = AXIS2_PLACEMENT_3D('',#70947,#70948,#70949); +#70947 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#70948 = DIRECTION('',(1.,0.,0.)); +#70949 = DIRECTION('',(0.,-1.,0.)); +#70950 = ADVANCED_FACE('',(#70951),#70995,.T.); +#70951 = FACE_BOUND('',#70952,.T.); +#70952 = EDGE_LOOP('',(#70953,#70964,#70971,#70972,#70980,#70989)); +#70953 = ORIENTED_EDGE('',*,*,#70954,.T.); +#70954 = EDGE_CURVE('',#70955,#70957,#70959,.T.); +#70955 = VERTEX_POINT('',#70956); +#70956 = CARTESIAN_POINT('',(6.145,-2.26,0.59)); +#70957 = VERTEX_POINT('',#70958); +#70958 = CARTESIAN_POINT('',(7.,-2.26,1.071372002298)); +#70959 = CIRCLE('',#70960,1.); +#70960 = AXIS2_PLACEMENT_3D('',#70961,#70962,#70963); +#70961 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#70962 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70963 = DIRECTION('',(0.,2.2E-16,-1.)); +#70964 = ORIENTED_EDGE('',*,*,#70965,.F.); +#70965 = EDGE_CURVE('',#70869,#70957,#70966,.T.); +#70966 = ELLIPSE('',#70967,1.414213562373,1.); +#70967 = AXIS2_PLACEMENT_3D('',#70968,#70969,#70970); +#70968 = CARTESIAN_POINT('',(6.145,-3.115,1.59)); +#70969 = DIRECTION('',(-0.707106781187,0.707106781187,2.999999999998E-17 + )); +#70970 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.799999999998E-16)); +#70971 = ORIENTED_EDGE('',*,*,#70940,.F.); +#70972 = ORIENTED_EDGE('',*,*,#70973,.T.); +#70973 = EDGE_CURVE('',#70933,#70974,#70976,.T.); +#70974 = VERTEX_POINT('',#70975); +#70975 = CARTESIAN_POINT('',(7.145,-3.93,1.59)); +#70976 = LINE('',#70977,#70978); +#70977 = CARTESIAN_POINT('',(7.145,-2.26,1.59)); +#70978 = VECTOR('',#70979,1.); +#70979 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70980 = ORIENTED_EDGE('',*,*,#70981,.T.); +#70981 = EDGE_CURVE('',#70974,#70982,#70984,.T.); +#70982 = VERTEX_POINT('',#70983); +#70983 = CARTESIAN_POINT('',(6.145,-3.93,0.59)); +#70984 = CIRCLE('',#70985,1.); +#70985 = AXIS2_PLACEMENT_3D('',#70986,#70987,#70988); +#70986 = CARTESIAN_POINT('',(6.145,-3.93,1.59)); +#70987 = DIRECTION('',(0.,1.,3.5E-16)); +#70988 = DIRECTION('',(1.,-7.7E-32,2.2E-16)); +#70989 = ORIENTED_EDGE('',*,*,#70990,.F.); +#70990 = EDGE_CURVE('',#70955,#70982,#70991,.T.); +#70991 = LINE('',#70992,#70993); +#70992 = CARTESIAN_POINT('',(6.145,-2.26,0.59)); +#70993 = VECTOR('',#70994,1.); +#70994 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70995 = CYLINDRICAL_SURFACE('',#70996,1.); +#70996 = AXIS2_PLACEMENT_3D('',#70997,#70998,#70999); +#70997 = CARTESIAN_POINT('',(6.145,-2.26,1.59)); +#70998 = DIRECTION('',(0.,-1.,-2.2E-16)); +#70999 = DIRECTION('',(0.,2.2E-16,-1.)); +#71000 = ADVANCED_FACE('',(#71001),#71138,.F.); +#71001 = FACE_BOUND('',#71002,.F.); +#71002 = EDGE_LOOP('',(#71003,#71013,#71019,#71020,#71028,#71036,#71044, + #71052,#71060,#71068,#71076,#71084,#71092,#71100,#71108,#71116, + #71124,#71132)); +#71003 = ORIENTED_EDGE('',*,*,#71004,.T.); +#71004 = EDGE_CURVE('',#71005,#71007,#71009,.T.); +#71005 = VERTEX_POINT('',#71006); +#71006 = CARTESIAN_POINT('',(-0.195,-2.26,0.59)); +#71007 = VERTEX_POINT('',#71008); +#71008 = CARTESIAN_POINT('',(-0.195,-3.93,0.59)); +#71009 = LINE('',#71010,#71011); +#71010 = CARTESIAN_POINT('',(-0.195,-2.26,0.59)); +#71011 = VECTOR('',#71012,1.); +#71012 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71013 = ORIENTED_EDGE('',*,*,#71014,.F.); +#71014 = EDGE_CURVE('',#70982,#71007,#71015,.T.); +#71015 = LINE('',#71016,#71017); +#71016 = CARTESIAN_POINT('',(6.145,-3.93,0.59)); +#71017 = VECTOR('',#71018,1.); +#71018 = DIRECTION('',(-1.,0.,0.)); +#71019 = ORIENTED_EDGE('',*,*,#70990,.F.); +#71020 = ORIENTED_EDGE('',*,*,#71021,.F.); +#71021 = EDGE_CURVE('',#71022,#70955,#71024,.T.); +#71022 = VERTEX_POINT('',#71023); +#71023 = CARTESIAN_POINT('',(6.1,-2.26,0.59)); +#71024 = LINE('',#71025,#71026); +#71025 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71026 = VECTOR('',#71027,1.); +#71027 = DIRECTION('',(1.,0.,0.)); +#71028 = ORIENTED_EDGE('',*,*,#71029,.F.); +#71029 = EDGE_CURVE('',#71030,#71022,#71032,.T.); +#71030 = VERTEX_POINT('',#71031); +#71031 = CARTESIAN_POINT('',(5.8,-2.26,0.59)); +#71032 = LINE('',#71033,#71034); +#71033 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71034 = VECTOR('',#71035,1.); +#71035 = DIRECTION('',(1.,0.,0.)); +#71036 = ORIENTED_EDGE('',*,*,#71037,.F.); +#71037 = EDGE_CURVE('',#71038,#71030,#71040,.T.); +#71038 = VERTEX_POINT('',#71039); +#71039 = CARTESIAN_POINT('',(5.25,-2.26,0.59)); +#71040 = LINE('',#71041,#71042); +#71041 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71042 = VECTOR('',#71043,1.); +#71043 = DIRECTION('',(1.,0.,0.)); +#71044 = ORIENTED_EDGE('',*,*,#71045,.F.); +#71045 = EDGE_CURVE('',#71046,#71038,#71048,.T.); +#71046 = VERTEX_POINT('',#71047); +#71047 = CARTESIAN_POINT('',(4.95,-2.26,0.59)); +#71048 = LINE('',#71049,#71050); +#71049 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71050 = VECTOR('',#71051,1.); +#71051 = DIRECTION('',(1.,0.,0.)); +#71052 = ORIENTED_EDGE('',*,*,#71053,.F.); +#71053 = EDGE_CURVE('',#71054,#71046,#71056,.T.); +#71054 = VERTEX_POINT('',#71055); +#71055 = CARTESIAN_POINT('',(4.4,-2.26,0.59)); +#71056 = LINE('',#71057,#71058); +#71057 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71058 = VECTOR('',#71059,1.); +#71059 = DIRECTION('',(1.,0.,0.)); +#71060 = ORIENTED_EDGE('',*,*,#71061,.F.); +#71061 = EDGE_CURVE('',#71062,#71054,#71064,.T.); +#71062 = VERTEX_POINT('',#71063); +#71063 = CARTESIAN_POINT('',(4.275,-2.26,0.59)); +#71064 = LINE('',#71065,#71066); +#71065 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71066 = VECTOR('',#71067,1.); +#71067 = DIRECTION('',(1.,0.,0.)); +#71068 = ORIENTED_EDGE('',*,*,#71069,.T.); +#71069 = EDGE_CURVE('',#71062,#71070,#71072,.T.); +#71070 = VERTEX_POINT('',#71071); +#71071 = CARTESIAN_POINT('',(4.275,-2.76,0.59)); +#71072 = LINE('',#71073,#71074); +#71073 = CARTESIAN_POINT('',(4.275,-2.26,0.59)); +#71074 = VECTOR('',#71075,1.); +#71075 = DIRECTION('',(0.,-1.,2.2E-16)); +#71076 = ORIENTED_EDGE('',*,*,#71077,.F.); +#71077 = EDGE_CURVE('',#71078,#71070,#71080,.T.); +#71078 = VERTEX_POINT('',#71079); +#71079 = CARTESIAN_POINT('',(1.675,-2.76,0.59)); +#71080 = LINE('',#71081,#71082); +#71081 = CARTESIAN_POINT('',(1.675,-2.76,0.59)); +#71082 = VECTOR('',#71083,1.); +#71083 = DIRECTION('',(1.,0.,0.)); +#71084 = ORIENTED_EDGE('',*,*,#71085,.F.); +#71085 = EDGE_CURVE('',#71086,#71078,#71088,.T.); +#71086 = VERTEX_POINT('',#71087); +#71087 = CARTESIAN_POINT('',(1.675,-2.26,0.59)); +#71088 = LINE('',#71089,#71090); +#71089 = CARTESIAN_POINT('',(1.675,-2.26,0.59)); +#71090 = VECTOR('',#71091,1.); +#71091 = DIRECTION('',(0.,-1.,2.2E-16)); +#71092 = ORIENTED_EDGE('',*,*,#71093,.F.); +#71093 = EDGE_CURVE('',#71094,#71086,#71096,.T.); +#71094 = VERTEX_POINT('',#71095); +#71095 = CARTESIAN_POINT('',(1.55,-2.26,0.59)); +#71096 = LINE('',#71097,#71098); +#71097 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71098 = VECTOR('',#71099,1.); +#71099 = DIRECTION('',(1.,0.,0.)); +#71100 = ORIENTED_EDGE('',*,*,#71101,.F.); +#71101 = EDGE_CURVE('',#71102,#71094,#71104,.T.); +#71102 = VERTEX_POINT('',#71103); +#71103 = CARTESIAN_POINT('',(1.,-2.26,0.59)); +#71104 = LINE('',#71105,#71106); +#71105 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71106 = VECTOR('',#71107,1.); +#71107 = DIRECTION('',(1.,0.,0.)); +#71108 = ORIENTED_EDGE('',*,*,#71109,.F.); +#71109 = EDGE_CURVE('',#71110,#71102,#71112,.T.); +#71110 = VERTEX_POINT('',#71111); +#71111 = CARTESIAN_POINT('',(0.7,-2.26,0.59)); +#71112 = LINE('',#71113,#71114); +#71113 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71114 = VECTOR('',#71115,1.); +#71115 = DIRECTION('',(1.,0.,0.)); +#71116 = ORIENTED_EDGE('',*,*,#71117,.F.); +#71117 = EDGE_CURVE('',#71118,#71110,#71120,.T.); +#71118 = VERTEX_POINT('',#71119); +#71119 = CARTESIAN_POINT('',(0.15,-2.26,0.59)); +#71120 = LINE('',#71121,#71122); +#71121 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71122 = VECTOR('',#71123,1.); +#71123 = DIRECTION('',(1.,0.,0.)); +#71124 = ORIENTED_EDGE('',*,*,#71125,.F.); +#71125 = EDGE_CURVE('',#71126,#71118,#71128,.T.); +#71126 = VERTEX_POINT('',#71127); +#71127 = CARTESIAN_POINT('',(-0.15,-2.26,0.59)); +#71128 = LINE('',#71129,#71130); +#71129 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71130 = VECTOR('',#71131,1.); +#71131 = DIRECTION('',(1.,0.,0.)); +#71132 = ORIENTED_EDGE('',*,*,#71133,.F.); +#71133 = EDGE_CURVE('',#71005,#71126,#71134,.T.); +#71134 = LINE('',#71135,#71136); +#71135 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71136 = VECTOR('',#71137,1.); +#71137 = DIRECTION('',(1.,0.,0.)); +#71138 = PLANE('',#71139); +#71139 = AXIS2_PLACEMENT_3D('',#71140,#71141,#71142); +#71140 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#71141 = DIRECTION('',(0.,-2.2E-16,1.)); +#71142 = DIRECTION('',(1.,0.,0.)); +#71143 = ADVANCED_FACE('',(#71144),#71178,.F.); +#71144 = FACE_BOUND('',#71145,.F.); +#71145 = EDGE_LOOP('',(#71146,#71156,#71164,#71171,#71172)); +#71146 = ORIENTED_EDGE('',*,*,#71147,.F.); +#71147 = EDGE_CURVE('',#71148,#71150,#71152,.T.); +#71148 = VERTEX_POINT('',#71149); +#71149 = CARTESIAN_POINT('',(-1.05,-2.26,0.19)); +#71150 = VERTEX_POINT('',#71151); +#71151 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#71152 = LINE('',#71153,#71154); +#71153 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#71154 = VECTOR('',#71155,1.); +#71155 = DIRECTION('',(1.,0.,0.)); +#71156 = ORIENTED_EDGE('',*,*,#71157,.T.); +#71157 = EDGE_CURVE('',#71148,#71158,#71160,.T.); +#71158 = VERTEX_POINT('',#71159); +#71159 = CARTESIAN_POINT('',(-1.05,-2.26,1.071372002298)); +#71160 = LINE('',#71161,#71162); +#71161 = CARTESIAN_POINT('',(-1.05,-2.26,0.19)); +#71162 = VECTOR('',#71163,1.); +#71163 = DIRECTION('',(0.,0.,1.)); +#71164 = ORIENTED_EDGE('',*,*,#71165,.T.); +#71165 = EDGE_CURVE('',#71158,#71005,#71166,.T.); +#71166 = CIRCLE('',#71167,1.); +#71167 = AXIS2_PLACEMENT_3D('',#71168,#71169,#71170); +#71168 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#71169 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71170 = DIRECTION('',(0.,2.2E-16,-1.)); +#71171 = ORIENTED_EDGE('',*,*,#71133,.T.); +#71172 = ORIENTED_EDGE('',*,*,#71173,.F.); +#71173 = EDGE_CURVE('',#71150,#71126,#71174,.T.); +#71174 = LINE('',#71175,#71176); +#71175 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#71176 = VECTOR('',#71177,1.); +#71177 = DIRECTION('',(0.,0.,1.)); +#71178 = PLANE('',#71179); +#71179 = AXIS2_PLACEMENT_3D('',#71180,#71181,#71182); +#71180 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#71181 = DIRECTION('',(0.,1.,0.)); +#71182 = DIRECTION('',(1.,0.,0.)); +#71183 = ADVANCED_FACE('',(#71184),#71217,.T.); +#71184 = FACE_BOUND('',#71185,.T.); +#71185 = EDGE_LOOP('',(#71186,#71196,#71204,#71210,#71211)); +#71186 = ORIENTED_EDGE('',*,*,#71187,.T.); +#71187 = EDGE_CURVE('',#71188,#71190,#71192,.T.); +#71188 = VERTEX_POINT('',#71189); +#71189 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71190 = VERTEX_POINT('',#71191); +#71191 = CARTESIAN_POINT('',(-0.15,-1.96,1.59)); +#71192 = LINE('',#71193,#71194); +#71193 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71194 = VECTOR('',#71195,1.); +#71195 = DIRECTION('',(0.,0.,1.)); +#71196 = ORIENTED_EDGE('',*,*,#71197,.T.); +#71197 = EDGE_CURVE('',#71190,#71198,#71200,.T.); +#71198 = VERTEX_POINT('',#71199); +#71199 = CARTESIAN_POINT('',(-0.15,-2.26,1.59)); +#71200 = LINE('',#71201,#71202); +#71201 = CARTESIAN_POINT('',(-0.15,-1.96,1.59)); +#71202 = VECTOR('',#71203,1.); +#71203 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71204 = ORIENTED_EDGE('',*,*,#71205,.F.); +#71205 = EDGE_CURVE('',#71126,#71198,#71206,.T.); +#71206 = LINE('',#71207,#71208); +#71207 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#71208 = VECTOR('',#71209,1.); +#71209 = DIRECTION('',(0.,0.,1.)); +#71210 = ORIENTED_EDGE('',*,*,#71173,.F.); +#71211 = ORIENTED_EDGE('',*,*,#71212,.F.); +#71212 = EDGE_CURVE('',#71188,#71150,#71213,.T.); +#71213 = LINE('',#71214,#71215); +#71214 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71215 = VECTOR('',#71216,1.); +#71216 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71217 = PLANE('',#71218); +#71218 = AXIS2_PLACEMENT_3D('',#71219,#71220,#71221); +#71219 = CARTESIAN_POINT('',(-0.15,-1.96,0.19)); +#71220 = DIRECTION('',(1.,0.,0.)); +#71221 = DIRECTION('',(0.,-1.,0.)); +#71222 = ADVANCED_FACE('',(#71223),#71248,.F.); +#71223 = FACE_BOUND('',#71224,.F.); +#71224 = EDGE_LOOP('',(#71225,#71233,#71241,#71247)); +#71225 = ORIENTED_EDGE('',*,*,#71226,.T.); +#71226 = EDGE_CURVE('',#71198,#71227,#71229,.T.); +#71227 = VERTEX_POINT('',#71228); +#71228 = CARTESIAN_POINT('',(0.15,-2.26,1.59)); +#71229 = LINE('',#71230,#71231); +#71230 = CARTESIAN_POINT('',(-0.15,-2.26,1.59)); +#71231 = VECTOR('',#71232,1.); +#71232 = DIRECTION('',(1.,0.,0.)); +#71233 = ORIENTED_EDGE('',*,*,#71234,.T.); +#71234 = EDGE_CURVE('',#71227,#71235,#71237,.T.); +#71235 = VERTEX_POINT('',#71236); +#71236 = CARTESIAN_POINT('',(0.15,-1.96,1.59)); +#71237 = LINE('',#71238,#71239); +#71238 = CARTESIAN_POINT('',(0.15,-2.26,1.59)); +#71239 = VECTOR('',#71240,1.); +#71240 = DIRECTION('',(0.,1.,2.2E-16)); +#71241 = ORIENTED_EDGE('',*,*,#71242,.T.); +#71242 = EDGE_CURVE('',#71235,#71190,#71243,.T.); +#71243 = LINE('',#71244,#71245); +#71244 = CARTESIAN_POINT('',(0.15,-1.96,1.59)); +#71245 = VECTOR('',#71246,1.); +#71246 = DIRECTION('',(-1.,0.,0.)); +#71247 = ORIENTED_EDGE('',*,*,#71197,.T.); +#71248 = PLANE('',#71249); +#71249 = AXIS2_PLACEMENT_3D('',#71250,#71251,#71252); +#71250 = CARTESIAN_POINT('',(-4.440892098501E-16,-2.11,1.59)); +#71251 = DIRECTION('',(0.,-2.2E-16,1.)); +#71252 = DIRECTION('',(1.,0.,0.)); +#71253 = ADVANCED_FACE('',(#71254),#71285,.T.); +#71254 = FACE_BOUND('',#71255,.T.); +#71255 = EDGE_LOOP('',(#71256,#71264,#71270,#71271,#71279)); +#71256 = ORIENTED_EDGE('',*,*,#71257,.T.); +#71257 = EDGE_CURVE('',#71258,#71118,#71260,.T.); +#71258 = VERTEX_POINT('',#71259); +#71259 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71260 = LINE('',#71261,#71262); +#71261 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71262 = VECTOR('',#71263,1.); +#71263 = DIRECTION('',(0.,0.,1.)); +#71264 = ORIENTED_EDGE('',*,*,#71265,.T.); +#71265 = EDGE_CURVE('',#71118,#71227,#71266,.T.); +#71266 = LINE('',#71267,#71268); +#71267 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71268 = VECTOR('',#71269,1.); +#71269 = DIRECTION('',(0.,0.,1.)); +#71270 = ORIENTED_EDGE('',*,*,#71234,.T.); +#71271 = ORIENTED_EDGE('',*,*,#71272,.F.); +#71272 = EDGE_CURVE('',#71273,#71235,#71275,.T.); +#71273 = VERTEX_POINT('',#71274); +#71274 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71275 = LINE('',#71276,#71277); +#71276 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71277 = VECTOR('',#71278,1.); +#71278 = DIRECTION('',(0.,0.,1.)); +#71279 = ORIENTED_EDGE('',*,*,#71280,.F.); +#71280 = EDGE_CURVE('',#71258,#71273,#71281,.T.); +#71281 = LINE('',#71282,#71283); +#71282 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71283 = VECTOR('',#71284,1.); +#71284 = DIRECTION('',(0.,1.,2.2E-16)); +#71285 = PLANE('',#71286); +#71286 = AXIS2_PLACEMENT_3D('',#71287,#71288,#71289); +#71287 = CARTESIAN_POINT('',(0.15,-2.26,0.19)); +#71288 = DIRECTION('',(-1.,0.,0.)); +#71289 = DIRECTION('',(0.,1.,0.)); +#71290 = ADVANCED_FACE('',(#71291),#71302,.T.); +#71291 = FACE_BOUND('',#71292,.T.); +#71292 = EDGE_LOOP('',(#71293,#71294,#71295,#71296)); +#71293 = ORIENTED_EDGE('',*,*,#71272,.T.); +#71294 = ORIENTED_EDGE('',*,*,#71242,.T.); +#71295 = ORIENTED_EDGE('',*,*,#71187,.F.); +#71296 = ORIENTED_EDGE('',*,*,#71297,.F.); +#71297 = EDGE_CURVE('',#71273,#71188,#71298,.T.); +#71298 = LINE('',#71299,#71300); +#71299 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71300 = VECTOR('',#71301,1.); +#71301 = DIRECTION('',(-1.,0.,0.)); +#71302 = PLANE('',#71303); +#71303 = AXIS2_PLACEMENT_3D('',#71304,#71305,#71306); +#71304 = CARTESIAN_POINT('',(0.15,-1.96,0.19)); +#71305 = DIRECTION('',(0.,-1.,0.)); +#71306 = DIRECTION('',(-1.,0.,0.)); +#71307 = ADVANCED_FACE('',(#71308),#71334,.T.); +#71308 = FACE_BOUND('',#71309,.T.); +#71309 = EDGE_LOOP('',(#71310,#71318,#71319,#71328)); +#71310 = ORIENTED_EDGE('',*,*,#71311,.F.); +#71311 = EDGE_CURVE('',#71148,#71312,#71314,.T.); +#71312 = VERTEX_POINT('',#71313); +#71313 = CARTESIAN_POINT('',(-1.195,-2.115,0.19)); +#71314 = LINE('',#71315,#71316); +#71315 = CARTESIAN_POINT('',(-0.4325,-2.8775,0.19)); +#71316 = VECTOR('',#71317,1.); +#71317 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#71318 = ORIENTED_EDGE('',*,*,#71157,.T.); +#71319 = ORIENTED_EDGE('',*,*,#71320,.T.); +#71320 = EDGE_CURVE('',#71158,#71321,#71323,.T.); +#71321 = VERTEX_POINT('',#71322); +#71322 = CARTESIAN_POINT('',(-1.195,-2.115,1.589999946273)); +#71323 = ELLIPSE('',#71324,1.414213562373,1.); +#71324 = AXIS2_PLACEMENT_3D('',#71325,#71326,#71327); +#71325 = CARTESIAN_POINT('',(-0.195,-3.115,1.59)); +#71326 = DIRECTION('',(0.707106781187,0.707106781187,2.999999999998E-17) + ); +#71327 = DIRECTION('',(0.707106781187,-0.707106781187, + -2.799999999998E-16)); +#71328 = ORIENTED_EDGE('',*,*,#71329,.F.); +#71329 = EDGE_CURVE('',#71312,#71321,#71330,.T.); +#71330 = LINE('',#71331,#71332); +#71331 = CARTESIAN_POINT('',(-1.195,-2.115,0.19)); +#71332 = VECTOR('',#71333,1.); +#71333 = DIRECTION('',(0.,0.,1.)); +#71334 = PLANE('',#71335); +#71335 = AXIS2_PLACEMENT_3D('',#71336,#71337,#71338); +#71336 = CARTESIAN_POINT('',(-1.1225,-2.1875,0.19)); +#71337 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.999999999998E-17)); +#71338 = DIRECTION('',(-2.121320343558E-17,-2.121320343558E-17,1.)); +#71339 = ADVANCED_FACE('',(#71340),#71413,.F.); +#71340 = FACE_BOUND('',#71341,.F.); +#71341 = EDGE_LOOP('',(#71342,#71343,#71351,#71359,#71367,#71375,#71383, + #71391,#71399,#71407)); +#71342 = ORIENTED_EDGE('',*,*,#71329,.F.); +#71343 = ORIENTED_EDGE('',*,*,#71344,.F.); +#71344 = EDGE_CURVE('',#71345,#71312,#71347,.T.); +#71345 = VERTEX_POINT('',#71346); +#71346 = CARTESIAN_POINT('',(-1.195,-0.1,0.19)); +#71347 = LINE('',#71348,#71349); +#71348 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#71349 = VECTOR('',#71350,1.); +#71350 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71351 = ORIENTED_EDGE('',*,*,#71352,.T.); +#71352 = EDGE_CURVE('',#71345,#71353,#71355,.T.); +#71353 = VERTEX_POINT('',#71354); +#71354 = CARTESIAN_POINT('',(-1.195,-0.1,1.285)); +#71355 = LINE('',#71356,#71357); +#71356 = CARTESIAN_POINT('',(-1.195,-0.1,-1.E-02)); +#71357 = VECTOR('',#71358,1.); +#71358 = DIRECTION('',(0.,0.,1.)); +#71359 = ORIENTED_EDGE('',*,*,#71360,.T.); +#71360 = EDGE_CURVE('',#71353,#71361,#71363,.T.); +#71361 = VERTEX_POINT('',#71362); +#71362 = CARTESIAN_POINT('',(-1.195,-0.63,1.285)); +#71363 = LINE('',#71364,#71365); +#71364 = CARTESIAN_POINT('',(-1.195,0.56,1.285)); +#71365 = VECTOR('',#71366,1.); +#71366 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71367 = ORIENTED_EDGE('',*,*,#71368,.F.); +#71368 = EDGE_CURVE('',#71369,#71361,#71371,.T.); +#71369 = VERTEX_POINT('',#71370); +#71370 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#71371 = LINE('',#71372,#71373); +#71372 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#71373 = VECTOR('',#71374,1.); +#71374 = DIRECTION('',(0.,0.,-1.)); +#71375 = ORIENTED_EDGE('',*,*,#71376,.F.); +#71376 = EDGE_CURVE('',#71377,#71369,#71379,.T.); +#71377 = VERTEX_POINT('',#71378); +#71378 = CARTESIAN_POINT('',(-1.195,0.56,1.87)); +#71379 = LINE('',#71380,#71381); +#71380 = CARTESIAN_POINT('',(-1.195,0.56,1.87)); +#71381 = VECTOR('',#71382,1.); +#71382 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71383 = ORIENTED_EDGE('',*,*,#71384,.T.); +#71384 = EDGE_CURVE('',#71377,#71385,#71387,.T.); +#71385 = VERTEX_POINT('',#71386); +#71386 = CARTESIAN_POINT('',(-1.195,0.56,2.15)); +#71387 = LINE('',#71388,#71389); +#71388 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#71389 = VECTOR('',#71390,1.); +#71390 = DIRECTION('',(0.,0.,1.)); +#71391 = ORIENTED_EDGE('',*,*,#71392,.T.); +#71392 = EDGE_CURVE('',#71385,#71393,#71395,.T.); +#71393 = VERTEX_POINT('',#71394); +#71394 = CARTESIAN_POINT('',(-1.195,-2.26,2.15)); +#71395 = LINE('',#71396,#71397); +#71396 = CARTESIAN_POINT('',(-1.195,-0.44,2.15)); +#71397 = VECTOR('',#71398,1.); +#71398 = DIRECTION('',(0.,-1.,0.)); +#71399 = ORIENTED_EDGE('',*,*,#71400,.T.); +#71400 = EDGE_CURVE('',#71393,#71401,#71403,.T.); +#71401 = VERTEX_POINT('',#71402); +#71402 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#71403 = LINE('',#71404,#71405); +#71404 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71405 = VECTOR('',#71406,1.); +#71406 = DIRECTION('',(0.,2.2E-16,-1.)); +#71407 = ORIENTED_EDGE('',*,*,#71408,.T.); +#71408 = EDGE_CURVE('',#71401,#71321,#71409,.T.); +#71409 = LINE('',#71410,#71411); +#71410 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#71411 = VECTOR('',#71412,1.); +#71412 = DIRECTION('',(0.,1.,2.2E-16)); +#71413 = PLANE('',#71414); +#71414 = AXIS2_PLACEMENT_3D('',#71415,#71416,#71417); +#71415 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#71416 = DIRECTION('',(1.,0.,0.)); +#71417 = DIRECTION('',(0.,-1.,0.)); +#71418 = ADVANCED_FACE('',(#71419),#71444,.F.); +#71419 = FACE_BOUND('',#71420,.F.); +#71420 = EDGE_LOOP('',(#71421,#71429,#71437,#71443)); +#71421 = ORIENTED_EDGE('',*,*,#71422,.T.); +#71422 = EDGE_CURVE('',#71393,#71423,#71425,.T.); +#71423 = VERTEX_POINT('',#71424); +#71424 = CARTESIAN_POINT('',(-1.195,-3.93,2.15)); +#71425 = LINE('',#71426,#71427); +#71426 = CARTESIAN_POINT('',(-1.195,-2.26,2.15)); +#71427 = VECTOR('',#71428,1.); +#71428 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71429 = ORIENTED_EDGE('',*,*,#71430,.F.); +#71430 = EDGE_CURVE('',#71431,#71423,#71433,.T.); +#71431 = VERTEX_POINT('',#71432); +#71432 = CARTESIAN_POINT('',(-1.195,-3.93,1.59)); +#71433 = LINE('',#71434,#71435); +#71434 = CARTESIAN_POINT('',(-1.195,-3.93,1.59)); +#71435 = VECTOR('',#71436,1.); +#71436 = DIRECTION('',(0.,-2.2E-16,1.)); +#71437 = ORIENTED_EDGE('',*,*,#71438,.F.); +#71438 = EDGE_CURVE('',#71401,#71431,#71439,.T.); +#71439 = LINE('',#71440,#71441); +#71440 = CARTESIAN_POINT('',(-1.195,-2.26,1.59)); +#71441 = VECTOR('',#71442,1.); +#71442 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71443 = ORIENTED_EDGE('',*,*,#71400,.F.); +#71444 = PLANE('',#71445); +#71445 = AXIS2_PLACEMENT_3D('',#71446,#71447,#71448); +#71446 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71447 = DIRECTION('',(1.,0.,0.)); +#71448 = DIRECTION('',(0.,2.2E-16,-1.)); +#71449 = ADVANCED_FACE('',(#71450),#71475,.T.); +#71450 = FACE_BOUND('',#71451,.F.); +#71451 = EDGE_LOOP('',(#71452,#71460,#71461,#71469)); +#71452 = ORIENTED_EDGE('',*,*,#71453,.F.); +#71453 = EDGE_CURVE('',#71431,#71454,#71456,.T.); +#71454 = VERTEX_POINT('',#71455); +#71455 = CARTESIAN_POINT('',(-1.065,-4.06,1.59)); +#71456 = LINE('',#71457,#71458); +#71457 = CARTESIAN_POINT('',(-1.195,-3.93,1.59)); +#71458 = VECTOR('',#71459,1.); +#71459 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.999999999999E-16)); +#71460 = ORIENTED_EDGE('',*,*,#71430,.T.); +#71461 = ORIENTED_EDGE('',*,*,#71462,.T.); +#71462 = EDGE_CURVE('',#71423,#71463,#71465,.T.); +#71463 = VERTEX_POINT('',#71464); +#71464 = CARTESIAN_POINT('',(-1.065,-4.06,2.15)); +#71465 = LINE('',#71466,#71467); +#71466 = CARTESIAN_POINT('',(-1.13,-3.995,2.15)); +#71467 = VECTOR('',#71468,1.); +#71468 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#71469 = ORIENTED_EDGE('',*,*,#71470,.F.); +#71470 = EDGE_CURVE('',#71454,#71463,#71471,.T.); +#71471 = LINE('',#71472,#71473); +#71472 = CARTESIAN_POINT('',(-1.065,-4.06,1.59)); +#71473 = VECTOR('',#71474,1.); +#71474 = DIRECTION('',(0.,-2.2E-16,1.)); +#71475 = PLANE('',#71476); +#71476 = AXIS2_PLACEMENT_3D('',#71477,#71478,#71479); +#71477 = CARTESIAN_POINT('',(-1.13,-3.995,1.59)); +#71478 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.199999999999E-16)); +#71479 = DIRECTION('',(4.056349186096E-17,2.705634918609E-16,-1.)); +#71480 = ADVANCED_FACE('',(#71481,#71551),#71612,.F.); +#71481 = FACE_BOUND('',#71482,.F.); +#71482 = EDGE_LOOP('',(#71483,#71493,#71502,#71510,#71519,#71527,#71536, + #71544)); +#71483 = ORIENTED_EDGE('',*,*,#71484,.F.); +#71484 = EDGE_CURVE('',#71485,#71487,#71489,.T.); +#71485 = VERTEX_POINT('',#71486); +#71486 = CARTESIAN_POINT('',(-0.1,-4.06,2.469999999982)); +#71487 = VERTEX_POINT('',#71488); +#71488 = CARTESIAN_POINT('',(6.05,-4.06,2.469999999982)); +#71489 = LINE('',#71490,#71491); +#71490 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#71491 = VECTOR('',#71492,1.); +#71492 = DIRECTION('',(1.,0.,0.)); +#71493 = ORIENTED_EDGE('',*,*,#71494,.T.); +#71494 = EDGE_CURVE('',#71485,#71495,#71497,.T.); +#71495 = VERTEX_POINT('',#71496); +#71496 = CARTESIAN_POINT('',(-0.37,-4.06,2.199999999982)); +#71497 = CIRCLE('',#71498,0.27); +#71498 = AXIS2_PLACEMENT_3D('',#71499,#71500,#71501); +#71499 = CARTESIAN_POINT('',(-0.1,-4.06,2.199999999982)); +#71500 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71501 = DIRECTION('',(0.,2.2E-16,-1.)); +#71502 = ORIENTED_EDGE('',*,*,#71503,.T.); +#71503 = EDGE_CURVE('',#71495,#71504,#71506,.T.); +#71504 = VERTEX_POINT('',#71505); +#71505 = CARTESIAN_POINT('',(-0.37,-4.06,1.539999999982)); +#71506 = LINE('',#71507,#71508); +#71507 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#71508 = VECTOR('',#71509,1.); +#71509 = DIRECTION('',(0.,2.2E-16,-1.)); +#71510 = ORIENTED_EDGE('',*,*,#71511,.F.); +#71511 = EDGE_CURVE('',#71512,#71504,#71514,.T.); +#71512 = VERTEX_POINT('',#71513); +#71513 = CARTESIAN_POINT('',(-0.1,-4.06,1.269999999982)); +#71514 = CIRCLE('',#71515,0.27); +#71515 = AXIS2_PLACEMENT_3D('',#71516,#71517,#71518); +#71516 = CARTESIAN_POINT('',(-0.1,-4.06,1.539999999982)); +#71517 = DIRECTION('',(0.,1.,2.2E-16)); +#71518 = DIRECTION('',(0.,2.2E-16,-1.)); +#71519 = ORIENTED_EDGE('',*,*,#71520,.T.); +#71520 = EDGE_CURVE('',#71512,#71521,#71523,.T.); +#71521 = VERTEX_POINT('',#71522); +#71522 = CARTESIAN_POINT('',(6.05,-4.06,1.269999999982)); +#71523 = LINE('',#71524,#71525); +#71524 = CARTESIAN_POINT('',(-0.370000000078,-4.06,1.269999999982)); +#71525 = VECTOR('',#71526,1.); +#71526 = DIRECTION('',(1.,0.,0.)); +#71527 = ORIENTED_EDGE('',*,*,#71528,.F.); +#71528 = EDGE_CURVE('',#71529,#71521,#71531,.T.); +#71529 = VERTEX_POINT('',#71530); +#71530 = CARTESIAN_POINT('',(6.32,-4.06,1.539999999982)); +#71531 = CIRCLE('',#71532,0.27); +#71532 = AXIS2_PLACEMENT_3D('',#71533,#71534,#71535); +#71533 = CARTESIAN_POINT('',(6.05,-4.06,1.539999999982)); +#71534 = DIRECTION('',(0.,1.,2.2E-16)); +#71535 = DIRECTION('',(0.,2.2E-16,-1.)); +#71536 = ORIENTED_EDGE('',*,*,#71537,.F.); +#71537 = EDGE_CURVE('',#71538,#71529,#71540,.T.); +#71538 = VERTEX_POINT('',#71539); +#71539 = CARTESIAN_POINT('',(6.32,-4.06,2.199999999982)); +#71540 = LINE('',#71541,#71542); +#71541 = CARTESIAN_POINT('',(6.32,-4.06,2.469999999982)); +#71542 = VECTOR('',#71543,1.); +#71543 = DIRECTION('',(0.,2.2E-16,-1.)); +#71544 = ORIENTED_EDGE('',*,*,#71545,.F.); +#71545 = EDGE_CURVE('',#71487,#71538,#71546,.T.); +#71546 = CIRCLE('',#71547,0.27); +#71547 = AXIS2_PLACEMENT_3D('',#71548,#71549,#71550); +#71548 = CARTESIAN_POINT('',(6.05,-4.06,2.199999999982)); +#71549 = DIRECTION('',(0.,1.,2.2E-16)); +#71550 = DIRECTION('',(0.,2.2E-16,-1.)); +#71551 = FACE_BOUND('',#71552,.F.); +#71552 = EDGE_LOOP('',(#71553,#71563,#71572,#71580,#71589,#71597,#71604, + #71605)); +#71553 = ORIENTED_EDGE('',*,*,#71554,.T.); +#71554 = EDGE_CURVE('',#71555,#71557,#71559,.T.); +#71555 = VERTEX_POINT('',#71556); +#71556 = CARTESIAN_POINT('',(-0.195,-4.06,3.02)); +#71557 = VERTEX_POINT('',#71558); +#71558 = CARTESIAN_POINT('',(6.145,-4.06,3.02)); +#71559 = LINE('',#71560,#71561); +#71560 = CARTESIAN_POINT('',(-0.195,-4.06,3.02)); +#71561 = VECTOR('',#71562,1.); +#71562 = DIRECTION('',(1.,0.,0.)); +#71563 = ORIENTED_EDGE('',*,*,#71564,.T.); +#71564 = EDGE_CURVE('',#71557,#71565,#71567,.T.); +#71565 = VERTEX_POINT('',#71566); +#71566 = CARTESIAN_POINT('',(7.015,-4.06,2.15)); +#71567 = CIRCLE('',#71568,0.87); +#71568 = AXIS2_PLACEMENT_3D('',#71569,#71570,#71571); +#71569 = CARTESIAN_POINT('',(6.145,-4.06,2.15)); +#71570 = DIRECTION('',(-0.,1.,3.5E-16)); +#71571 = DIRECTION('',(0.,-3.5E-16,1.)); +#71572 = ORIENTED_EDGE('',*,*,#71573,.T.); +#71573 = EDGE_CURVE('',#71565,#71574,#71576,.T.); +#71574 = VERTEX_POINT('',#71575); +#71575 = CARTESIAN_POINT('',(7.015,-4.06,1.59)); +#71576 = LINE('',#71577,#71578); +#71577 = CARTESIAN_POINT('',(7.015,-4.06,2.15)); +#71578 = VECTOR('',#71579,1.); +#71579 = DIRECTION('',(0.,2.2E-16,-1.)); +#71580 = ORIENTED_EDGE('',*,*,#71581,.T.); +#71581 = EDGE_CURVE('',#71574,#71582,#71584,.T.); +#71582 = VERTEX_POINT('',#71583); +#71583 = CARTESIAN_POINT('',(6.145,-4.06,0.72)); +#71584 = CIRCLE('',#71585,0.87); +#71585 = AXIS2_PLACEMENT_3D('',#71586,#71587,#71588); +#71586 = CARTESIAN_POINT('',(6.145,-4.06,1.59)); +#71587 = DIRECTION('',(0.,1.,3.5E-16)); +#71588 = DIRECTION('',(1.,-7.7E-32,2.2E-16)); +#71589 = ORIENTED_EDGE('',*,*,#71590,.T.); +#71590 = EDGE_CURVE('',#71582,#71591,#71593,.T.); +#71591 = VERTEX_POINT('',#71592); +#71592 = CARTESIAN_POINT('',(-0.195,-4.06,0.72)); +#71593 = LINE('',#71594,#71595); +#71594 = CARTESIAN_POINT('',(6.145,-4.06,0.72)); +#71595 = VECTOR('',#71596,1.); +#71596 = DIRECTION('',(-1.,0.,0.)); +#71597 = ORIENTED_EDGE('',*,*,#71598,.T.); +#71598 = EDGE_CURVE('',#71591,#71454,#71599,.T.); +#71599 = CIRCLE('',#71600,0.87); +#71600 = AXIS2_PLACEMENT_3D('',#71601,#71602,#71603); +#71601 = CARTESIAN_POINT('',(-0.195,-4.06,1.59)); +#71602 = DIRECTION('',(-7.601021176044E-48,1.,3.5E-16)); +#71603 = DIRECTION('',(-4.4E-16,3.5E-16,-1.)); +#71604 = ORIENTED_EDGE('',*,*,#71470,.T.); +#71605 = ORIENTED_EDGE('',*,*,#71606,.T.); +#71606 = EDGE_CURVE('',#71463,#71555,#71607,.T.); +#71607 = CIRCLE('',#71608,0.87); +#71608 = AXIS2_PLACEMENT_3D('',#71609,#71610,#71611); +#71609 = CARTESIAN_POINT('',(-0.195,-4.06,2.15)); +#71610 = DIRECTION('',(0.,1.,3.5E-16)); +#71611 = DIRECTION('',(-1.,0.,0.)); +#71612 = PLANE('',#71613); +#71613 = AXIS2_PLACEMENT_3D('',#71614,#71615,#71616); +#71614 = CARTESIAN_POINT('',(2.975,-4.06,1.87)); +#71615 = DIRECTION('',(0.,1.,5.7E-16)); +#71616 = DIRECTION('',(0.,-5.7E-16,1.)); +#71617 = ADVANCED_FACE('',(#71618),#71641,.F.); +#71618 = FACE_BOUND('',#71619,.F.); +#71619 = EDGE_LOOP('',(#71620,#71628,#71634,#71640)); +#71620 = ORIENTED_EDGE('',*,*,#71621,.F.); +#71621 = EDGE_CURVE('',#71622,#71565,#71624,.T.); +#71622 = VERTEX_POINT('',#71623); +#71623 = CARTESIAN_POINT('',(7.145,-3.93,2.15)); +#71624 = LINE('',#71625,#71626); +#71625 = CARTESIAN_POINT('',(7.145,-3.93,2.15)); +#71626 = VECTOR('',#71627,1.); +#71627 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.899999999998E-16)); +#71628 = ORIENTED_EDGE('',*,*,#71629,.T.); +#71629 = EDGE_CURVE('',#71622,#70974,#71630,.T.); +#71630 = LINE('',#71631,#71632); +#71631 = CARTESIAN_POINT('',(7.145,-3.93,2.15)); +#71632 = VECTOR('',#71633,1.); +#71633 = DIRECTION('',(0.,2.2E-16,-1.)); +#71634 = ORIENTED_EDGE('',*,*,#71635,.T.); +#71635 = EDGE_CURVE('',#70974,#71574,#71636,.T.); +#71636 = LINE('',#71637,#71638); +#71637 = CARTESIAN_POINT('',(7.08,-3.995,1.59)); +#71638 = VECTOR('',#71639,1.); +#71639 = DIRECTION('',(-0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#71640 = ORIENTED_EDGE('',*,*,#71573,.F.); +#71641 = PLANE('',#71642); +#71642 = AXIS2_PLACEMENT_3D('',#71643,#71644,#71645); +#71643 = CARTESIAN_POINT('',(7.08,-3.995,2.15)); +#71644 = DIRECTION('',(-0.707106781187,0.707106781187,2.199999999999E-16 + )); +#71645 = DIRECTION('',(-4.056349186096E-17,2.705634918609E-16,-1.)); +#71646 = ADVANCED_FACE('',(#71647),#71666,.T.); +#71647 = FACE_BOUND('',#71648,.T.); +#71648 = EDGE_LOOP('',(#71649,#71650,#71651,#71660)); +#71649 = ORIENTED_EDGE('',*,*,#71564,.T.); +#71650 = ORIENTED_EDGE('',*,*,#71621,.F.); +#71651 = ORIENTED_EDGE('',*,*,#71652,.F.); +#71652 = EDGE_CURVE('',#71653,#71622,#71655,.T.); +#71653 = VERTEX_POINT('',#71654); +#71654 = CARTESIAN_POINT('',(6.145,-3.93,3.15)); +#71655 = CIRCLE('',#71656,1.); +#71656 = AXIS2_PLACEMENT_3D('',#71657,#71658,#71659); +#71657 = CARTESIAN_POINT('',(6.145,-3.93,2.15)); +#71658 = DIRECTION('',(-0.,1.,3.5E-16)); +#71659 = DIRECTION('',(0.,-3.5E-16,1.)); +#71660 = ORIENTED_EDGE('',*,*,#71661,.T.); +#71661 = EDGE_CURVE('',#71653,#71557,#71662,.T.); +#71662 = LINE('',#71663,#71664); +#71663 = CARTESIAN_POINT('',(6.145,-3.995,3.085)); +#71664 = VECTOR('',#71665,1.); +#71665 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#71666 = CONICAL_SURFACE('',#71667,1.,0.785398163397); +#71667 = AXIS2_PLACEMENT_3D('',#71668,#71669,#71670); +#71668 = CARTESIAN_POINT('',(6.145,-3.93,2.15)); +#71669 = DIRECTION('',(0.,1.,3.5E-16)); +#71670 = DIRECTION('',(0.,-3.5E-16,1.)); +#71671 = ADVANCED_FACE('',(#71672),#71696,.T.); +#71672 = FACE_BOUND('',#71673,.T.); +#71673 = EDGE_LOOP('',(#71674,#71675,#71681,#71690)); +#71674 = ORIENTED_EDGE('',*,*,#71652,.T.); +#71675 = ORIENTED_EDGE('',*,*,#71676,.F.); +#71676 = EDGE_CURVE('',#70925,#71622,#71677,.T.); +#71677 = LINE('',#71678,#71679); +#71678 = CARTESIAN_POINT('',(7.145,-2.26,2.15)); +#71679 = VECTOR('',#71680,1.); +#71680 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71681 = ORIENTED_EDGE('',*,*,#71682,.F.); +#71682 = EDGE_CURVE('',#71683,#70925,#71685,.T.); +#71683 = VERTEX_POINT('',#71684); +#71684 = CARTESIAN_POINT('',(6.145,-2.26,3.15)); +#71685 = CIRCLE('',#71686,1.); +#71686 = AXIS2_PLACEMENT_3D('',#71687,#71688,#71689); +#71687 = CARTESIAN_POINT('',(6.145,-2.26,2.15)); +#71688 = DIRECTION('',(0.,1.,2.2E-16)); +#71689 = DIRECTION('',(0.,2.2E-16,-1.)); +#71690 = ORIENTED_EDGE('',*,*,#71691,.T.); +#71691 = EDGE_CURVE('',#71683,#71653,#71692,.T.); +#71692 = LINE('',#71693,#71694); +#71693 = CARTESIAN_POINT('',(6.145,-2.26,3.15)); +#71694 = VECTOR('',#71695,1.); +#71695 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71696 = CYLINDRICAL_SURFACE('',#71697,1.); +#71697 = AXIS2_PLACEMENT_3D('',#71698,#71699,#71700); +#71698 = CARTESIAN_POINT('',(6.145,-2.26,2.15)); +#71699 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71700 = DIRECTION('',(0.,-2.2E-16,1.)); +#71701 = ADVANCED_FACE('',(#71702),#71727,.T.); +#71702 = FACE_BOUND('',#71703,.T.); +#71703 = EDGE_LOOP('',(#71704,#71714,#71720,#71721)); +#71704 = ORIENTED_EDGE('',*,*,#71705,.T.); +#71705 = EDGE_CURVE('',#71706,#71708,#71710,.T.); +#71706 = VERTEX_POINT('',#71707); +#71707 = CARTESIAN_POINT('',(-0.195,-2.26,3.15)); +#71708 = VERTEX_POINT('',#71709); +#71709 = CARTESIAN_POINT('',(-0.195,-3.93,3.15)); +#71710 = LINE('',#71711,#71712); +#71711 = CARTESIAN_POINT('',(-0.195,-2.26,3.15)); +#71712 = VECTOR('',#71713,1.); +#71713 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71714 = ORIENTED_EDGE('',*,*,#71715,.T.); +#71715 = EDGE_CURVE('',#71708,#71653,#71716,.T.); +#71716 = LINE('',#71717,#71718); +#71717 = CARTESIAN_POINT('',(-0.195,-3.93,3.15)); +#71718 = VECTOR('',#71719,1.); +#71719 = DIRECTION('',(1.,0.,0.)); +#71720 = ORIENTED_EDGE('',*,*,#71691,.F.); +#71721 = ORIENTED_EDGE('',*,*,#71722,.F.); +#71722 = EDGE_CURVE('',#71706,#71683,#71723,.T.); +#71723 = LINE('',#71724,#71725); +#71724 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71725 = VECTOR('',#71726,1.); +#71726 = DIRECTION('',(1.,0.,0.)); +#71727 = PLANE('',#71728); +#71728 = AXIS2_PLACEMENT_3D('',#71729,#71730,#71731); +#71729 = CARTESIAN_POINT('',(-1.195,-2.26,3.15)); +#71730 = DIRECTION('',(0.,-2.2E-16,1.)); +#71731 = DIRECTION('',(1.,0.,0.)); +#71732 = ADVANCED_FACE('',(#71733),#71758,.T.); +#71733 = FACE_BOUND('',#71734,.T.); +#71734 = EDGE_LOOP('',(#71735,#71745,#71751,#71752)); +#71735 = ORIENTED_EDGE('',*,*,#71736,.F.); +#71736 = EDGE_CURVE('',#71737,#71739,#71741,.T.); +#71737 = VERTEX_POINT('',#71738); +#71738 = CARTESIAN_POINT('',(-0.195,-0.44,3.15)); +#71739 = VERTEX_POINT('',#71740); +#71740 = CARTESIAN_POINT('',(6.145,-0.44,3.15)); +#71741 = LINE('',#71742,#71743); +#71742 = CARTESIAN_POINT('',(-1.195000000002,-0.44,3.15)); +#71743 = VECTOR('',#71744,1.); +#71744 = DIRECTION('',(1.,0.,0.)); +#71745 = ORIENTED_EDGE('',*,*,#71746,.T.); +#71746 = EDGE_CURVE('',#71737,#71706,#71747,.T.); +#71747 = LINE('',#71748,#71749); +#71748 = CARTESIAN_POINT('',(-0.195,-0.44,3.15)); +#71749 = VECTOR('',#71750,1.); +#71750 = DIRECTION('',(0.,-1.,0.)); +#71751 = ORIENTED_EDGE('',*,*,#71722,.T.); +#71752 = ORIENTED_EDGE('',*,*,#71753,.F.); +#71753 = EDGE_CURVE('',#71739,#71683,#71754,.T.); +#71754 = LINE('',#71755,#71756); +#71755 = CARTESIAN_POINT('',(6.145,-0.44,3.15)); +#71756 = VECTOR('',#71757,1.); +#71757 = DIRECTION('',(0.,-1.,0.)); +#71758 = PLANE('',#71759); +#71759 = AXIS2_PLACEMENT_3D('',#71760,#71761,#71762); +#71760 = CARTESIAN_POINT('',(2.975,-0.85,3.15)); +#71761 = DIRECTION('',(0.,-2.2E-16,1.)); +#71762 = DIRECTION('',(1.,0.,0.)); +#71763 = ADVANCED_FACE('',(#71764),#71791,.F.); +#71764 = FACE_BOUND('',#71765,.F.); +#71765 = EDGE_LOOP('',(#71766,#71767,#71776,#71784)); +#71766 = ORIENTED_EDGE('',*,*,#71736,.F.); +#71767 = ORIENTED_EDGE('',*,*,#71768,.F.); +#71768 = EDGE_CURVE('',#71769,#71737,#71771,.T.); +#71769 = VERTEX_POINT('',#71770); +#71770 = CARTESIAN_POINT('',(-1.19179486355,-0.44,2.23)); +#71771 = CIRCLE('',#71772,1.); +#71772 = AXIS2_PLACEMENT_3D('',#71773,#71774,#71775); +#71773 = CARTESIAN_POINT('',(-0.195,-0.44,2.15)); +#71774 = DIRECTION('',(0.,1.,0.)); +#71775 = DIRECTION('',(0.,0.,-1.)); +#71776 = ORIENTED_EDGE('',*,*,#71777,.T.); +#71777 = EDGE_CURVE('',#71769,#71778,#71780,.T.); +#71778 = VERTEX_POINT('',#71779); +#71779 = CARTESIAN_POINT('',(7.14179486355,-0.44,2.23)); +#71780 = LINE('',#71781,#71782); +#71781 = CARTESIAN_POINT('',(-1.195000000002,-0.44,2.23)); +#71782 = VECTOR('',#71783,1.); +#71783 = DIRECTION('',(1.,0.,0.)); +#71784 = ORIENTED_EDGE('',*,*,#71785,.T.); +#71785 = EDGE_CURVE('',#71778,#71739,#71786,.T.); +#71786 = CIRCLE('',#71787,1.); +#71787 = AXIS2_PLACEMENT_3D('',#71788,#71789,#71790); +#71788 = CARTESIAN_POINT('',(6.145,-0.44,2.15)); +#71789 = DIRECTION('',(0.,-1.,0.)); +#71790 = DIRECTION('',(0.,0.,-1.)); +#71791 = PLANE('',#71792); +#71792 = AXIS2_PLACEMENT_3D('',#71793,#71794,#71795); +#71793 = CARTESIAN_POINT('',(-1.195000000002,-0.44,3.15)); +#71794 = DIRECTION('',(0.,-1.,0.)); +#71795 = DIRECTION('',(1.,0.,0.)); +#71796 = ADVANCED_FACE('',(#71797),#71822,.T.); +#71797 = FACE_BOUND('',#71798,.T.); +#71798 = EDGE_LOOP('',(#71799,#71809,#71815,#71816)); +#71799 = ORIENTED_EDGE('',*,*,#71800,.F.); +#71800 = EDGE_CURVE('',#71801,#71803,#71805,.T.); +#71801 = VERTEX_POINT('',#71802); +#71802 = CARTESIAN_POINT('',(-1.19179486355,0.56,2.23)); +#71803 = VERTEX_POINT('',#71804); +#71804 = CARTESIAN_POINT('',(7.14179486355,0.56,2.23)); +#71805 = LINE('',#71806,#71807); +#71806 = CARTESIAN_POINT('',(-1.195,0.56,2.23)); +#71807 = VECTOR('',#71808,1.); +#71808 = DIRECTION('',(1.,0.,0.)); +#71809 = ORIENTED_EDGE('',*,*,#71810,.T.); +#71810 = EDGE_CURVE('',#71801,#71769,#71811,.T.); +#71811 = LINE('',#71812,#71813); +#71812 = CARTESIAN_POINT('',(-1.19179486355,-0.44,2.23)); +#71813 = VECTOR('',#71814,1.); +#71814 = DIRECTION('',(0.,-1.,0.)); +#71815 = ORIENTED_EDGE('',*,*,#71777,.T.); +#71816 = ORIENTED_EDGE('',*,*,#71817,.F.); +#71817 = EDGE_CURVE('',#71803,#71778,#71818,.T.); +#71818 = LINE('',#71819,#71820); +#71819 = CARTESIAN_POINT('',(7.14179486355,-0.44,2.23)); +#71820 = VECTOR('',#71821,1.); +#71821 = DIRECTION('',(0.,-1.,0.)); +#71822 = PLANE('',#71823); +#71823 = AXIS2_PLACEMENT_3D('',#71824,#71825,#71826); +#71824 = CARTESIAN_POINT('',(2.975,5.999999999995E-02,2.23)); +#71825 = DIRECTION('',(0.,-2.2E-16,1.)); +#71826 = DIRECTION('',(1.,0.,0.)); +#71827 = ADVANCED_FACE('',(#71828),#71838,.T.); +#71828 = FACE_BOUND('',#71829,.T.); +#71829 = EDGE_LOOP('',(#71830,#71831)); +#71830 = ORIENTED_EDGE('',*,*,#71682,.T.); +#71831 = ORIENTED_EDGE('',*,*,#71832,.T.); +#71832 = EDGE_CURVE('',#70925,#71683,#71833,.T.); +#71833 = CIRCLE('',#71834,1.); +#71834 = AXIS2_PLACEMENT_3D('',#71835,#71836,#71837); +#71835 = CARTESIAN_POINT('',(6.145,-2.26,2.15)); +#71836 = DIRECTION('',(0.,-1.,0.)); +#71837 = DIRECTION('',(0.,0.,-1.)); +#71838 = PLANE('',#71839); +#71839 = AXIS2_PLACEMENT_3D('',#71840,#71841,#71842); +#71840 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#71841 = DIRECTION('',(0.,1.,0.)); +#71842 = DIRECTION('',(1.,0.,0.)); +#71843 = ADVANCED_FACE('',(#71844),#71855,.F.); +#71844 = FACE_BOUND('',#71845,.F.); +#71845 = EDGE_LOOP('',(#71846,#71852,#71853,#71854)); +#71846 = ORIENTED_EDGE('',*,*,#71847,.F.); +#71847 = EDGE_CURVE('',#71708,#71555,#71848,.T.); +#71848 = LINE('',#71849,#71850); +#71849 = CARTESIAN_POINT('',(-0.195,-3.995,3.085)); +#71850 = VECTOR('',#71851,1.); +#71851 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#71852 = ORIENTED_EDGE('',*,*,#71715,.T.); +#71853 = ORIENTED_EDGE('',*,*,#71661,.T.); +#71854 = ORIENTED_EDGE('',*,*,#71554,.F.); +#71855 = PLANE('',#71856); +#71856 = AXIS2_PLACEMENT_3D('',#71857,#71858,#71859); +#71857 = CARTESIAN_POINT('',(-0.195,-3.995,3.085)); +#71858 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); +#71859 = DIRECTION('',(1.,0.,0.)); +#71860 = ADVANCED_FACE('',(#71861),#71887,.T.); +#71861 = FACE_BOUND('',#71862,.T.); +#71862 = EDGE_LOOP('',(#71863,#71871,#71880,#71886)); +#71863 = ORIENTED_EDGE('',*,*,#71864,.T.); +#71864 = EDGE_CURVE('',#71487,#71865,#71867,.T.); +#71865 = VERTEX_POINT('',#71866); +#71866 = CARTESIAN_POINT('',(6.05,-5.38,2.469999999982)); +#71867 = LINE('',#71868,#71869); +#71868 = CARTESIAN_POINT('',(6.05,-4.06,2.469999999982)); +#71869 = VECTOR('',#71870,1.); +#71870 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71871 = ORIENTED_EDGE('',*,*,#71872,.T.); +#71872 = EDGE_CURVE('',#71865,#71873,#71875,.T.); +#71873 = VERTEX_POINT('',#71874); +#71874 = CARTESIAN_POINT('',(6.32,-5.38,2.199999999982)); +#71875 = CIRCLE('',#71876,0.27); +#71876 = AXIS2_PLACEMENT_3D('',#71877,#71878,#71879); +#71877 = CARTESIAN_POINT('',(6.05,-5.38,2.199999999982)); +#71878 = DIRECTION('',(0.,1.,2.2E-16)); +#71879 = DIRECTION('',(0.,2.2E-16,-1.)); +#71880 = ORIENTED_EDGE('',*,*,#71881,.F.); +#71881 = EDGE_CURVE('',#71538,#71873,#71882,.T.); +#71882 = LINE('',#71883,#71884); +#71883 = CARTESIAN_POINT('',(6.32,-4.06,2.199999999982)); +#71884 = VECTOR('',#71885,1.); +#71885 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71886 = ORIENTED_EDGE('',*,*,#71545,.F.); +#71887 = CYLINDRICAL_SURFACE('',#71888,0.27); +#71888 = AXIS2_PLACEMENT_3D('',#71889,#71890,#71891); +#71889 = CARTESIAN_POINT('',(6.05,-4.06,2.199999999982)); +#71890 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71891 = DIRECTION('',(0.,-2.2E-16,1.)); +#71892 = ADVANCED_FACE('',(#71893),#71967,.F.); +#71893 = FACE_BOUND('',#71894,.F.); +#71894 = EDGE_LOOP('',(#71895,#71905,#71913,#71921,#71929,#71938,#71944, + #71945,#71953,#71961)); +#71895 = ORIENTED_EDGE('',*,*,#71896,.F.); +#71896 = EDGE_CURVE('',#71897,#71899,#71901,.T.); +#71897 = VERTEX_POINT('',#71898); +#71898 = CARTESIAN_POINT('',(-0.27,-5.38,2.17)); +#71899 = VERTEX_POINT('',#71900); +#71900 = CARTESIAN_POINT('',(6.22,-5.38,2.17)); +#71901 = LINE('',#71902,#71903); +#71902 = CARTESIAN_POINT('',(-0.37,-5.38,2.17)); +#71903 = VECTOR('',#71904,1.); +#71904 = DIRECTION('',(1.,0.,0.)); +#71905 = ORIENTED_EDGE('',*,*,#71906,.F.); +#71906 = EDGE_CURVE('',#71907,#71897,#71909,.T.); +#71907 = VERTEX_POINT('',#71908); +#71908 = CARTESIAN_POINT('',(-0.37,-5.38,2.07)); +#71909 = LINE('',#71910,#71911); +#71910 = CARTESIAN_POINT('',(0.441249999993,-5.38,2.881249999993)); +#71911 = VECTOR('',#71912,1.); +#71912 = DIRECTION('',(0.707106781187,-5.199999999997E-16,0.707106781187 + )); +#71913 = ORIENTED_EDGE('',*,*,#71914,.F.); +#71914 = EDGE_CURVE('',#71915,#71907,#71917,.T.); +#71915 = VERTEX_POINT('',#71916); +#71916 = CARTESIAN_POINT('',(-0.37,-5.38,2.17)); +#71917 = LINE('',#71918,#71919); +#71918 = CARTESIAN_POINT('',(-0.37,-5.38,1.71999999999)); +#71919 = VECTOR('',#71920,1.); +#71920 = DIRECTION('',(0.,7.4E-16,-1.)); +#71921 = ORIENTED_EDGE('',*,*,#71922,.F.); +#71922 = EDGE_CURVE('',#71923,#71915,#71925,.T.); +#71923 = VERTEX_POINT('',#71924); +#71924 = CARTESIAN_POINT('',(-0.37,-5.38,2.199999999982)); +#71925 = LINE('',#71926,#71927); +#71926 = CARTESIAN_POINT('',(-0.37,-5.38,2.469999999982)); +#71927 = VECTOR('',#71928,1.); +#71928 = DIRECTION('',(0.,2.2E-16,-1.)); +#71929 = ORIENTED_EDGE('',*,*,#71930,.F.); +#71930 = EDGE_CURVE('',#71931,#71923,#71933,.T.); +#71931 = VERTEX_POINT('',#71932); +#71932 = CARTESIAN_POINT('',(-0.1,-5.38,2.469999999982)); +#71933 = CIRCLE('',#71934,0.27); +#71934 = AXIS2_PLACEMENT_3D('',#71935,#71936,#71937); +#71935 = CARTESIAN_POINT('',(-0.1,-5.38,2.199999999982)); +#71936 = DIRECTION('',(0.,-1.,-2.2E-16)); +#71937 = DIRECTION('',(0.,2.2E-16,-1.)); +#71938 = ORIENTED_EDGE('',*,*,#71939,.T.); +#71939 = EDGE_CURVE('',#71931,#71865,#71940,.T.); +#71940 = LINE('',#71941,#71942); +#71941 = CARTESIAN_POINT('',(-0.37,-5.38,2.469999999982)); +#71942 = VECTOR('',#71943,1.); +#71943 = DIRECTION('',(1.,0.,0.)); +#71944 = ORIENTED_EDGE('',*,*,#71872,.T.); +#71945 = ORIENTED_EDGE('',*,*,#71946,.T.); +#71946 = EDGE_CURVE('',#71873,#71947,#71949,.T.); +#71947 = VERTEX_POINT('',#71948); +#71948 = CARTESIAN_POINT('',(6.32,-5.38,2.17)); +#71949 = LINE('',#71950,#71951); +#71950 = CARTESIAN_POINT('',(6.32,-5.38,2.469999999982)); +#71951 = VECTOR('',#71952,1.); +#71952 = DIRECTION('',(0.,2.2E-16,-1.)); +#71953 = ORIENTED_EDGE('',*,*,#71954,.T.); +#71954 = EDGE_CURVE('',#71947,#71955,#71957,.T.); +#71955 = VERTEX_POINT('',#71956); +#71956 = CARTESIAN_POINT('',(6.32,-5.38,2.07)); +#71957 = LINE('',#71958,#71959); +#71958 = CARTESIAN_POINT('',(6.32,-5.38,1.71999999999)); +#71959 = VECTOR('',#71960,1.); +#71960 = DIRECTION('',(0.,7.4E-16,-1.)); +#71961 = ORIENTED_EDGE('',*,*,#71962,.T.); +#71962 = EDGE_CURVE('',#71955,#71899,#71963,.T.); +#71963 = LINE('',#71964,#71965); +#71964 = CARTESIAN_POINT('',(5.508750000003,-5.38,2.881249999997)); +#71965 = VECTOR('',#71966,1.); +#71966 = DIRECTION('',(-0.707106781187,-5.199999999997E-16, + 0.707106781187)); +#71967 = PLANE('',#71968); +#71968 = AXIS2_PLACEMENT_3D('',#71969,#71970,#71971); +#71969 = CARTESIAN_POINT('',(2.974999999991,-5.38,1.86999999998)); +#71970 = DIRECTION('',(0.,1.,9.6E-16)); +#71971 = DIRECTION('',(0.,-9.6E-16,1.)); +#71972 = ADVANCED_FACE('',(#71973),#71998,.T.); +#71973 = FACE_BOUND('',#71974,.F.); +#71974 = EDGE_LOOP('',(#71975,#71976,#71984,#71992)); +#71975 = ORIENTED_EDGE('',*,*,#71962,.F.); +#71976 = ORIENTED_EDGE('',*,*,#71977,.T.); +#71977 = EDGE_CURVE('',#71955,#71978,#71980,.T.); +#71978 = VERTEX_POINT('',#71979); +#71979 = CARTESIAN_POINT('',(6.32,-5.76,2.07)); +#71980 = LINE('',#71981,#71982); +#71981 = CARTESIAN_POINT('',(6.32,-5.38,2.07)); +#71982 = VECTOR('',#71983,1.); +#71983 = DIRECTION('',(0.,-1.,0.)); +#71984 = ORIENTED_EDGE('',*,*,#71985,.T.); +#71985 = EDGE_CURVE('',#71978,#71986,#71988,.T.); +#71986 = VERTEX_POINT('',#71987); +#71987 = CARTESIAN_POINT('',(6.22,-5.76,2.17)); +#71988 = LINE('',#71989,#71990); +#71989 = CARTESIAN_POINT('',(6.3575,-5.76,2.0325)); +#71990 = VECTOR('',#71991,1.); +#71991 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#71992 = ORIENTED_EDGE('',*,*,#71993,.F.); +#71993 = EDGE_CURVE('',#71899,#71986,#71994,.T.); +#71994 = LINE('',#71995,#71996); +#71995 = CARTESIAN_POINT('',(6.22,-5.38,2.17)); +#71996 = VECTOR('',#71997,1.); +#71997 = DIRECTION('',(0.,-1.,0.)); +#71998 = PLANE('',#71999); +#71999 = AXIS2_PLACEMENT_3D('',#72000,#72001,#72002); +#72000 = CARTESIAN_POINT('',(6.27,-5.38,2.12)); +#72001 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72002 = DIRECTION('',(-0.,1.,0.)); +#72003 = ADVANCED_FACE('',(#72004),#72045,.F.); +#72004 = FACE_BOUND('',#72005,.F.); +#72005 = EDGE_LOOP('',(#72006,#72014,#72022,#72030,#72038,#72044)); +#72006 = ORIENTED_EDGE('',*,*,#72007,.F.); +#72007 = EDGE_CURVE('',#72008,#71978,#72010,.T.); +#72008 = VERTEX_POINT('',#72009); +#72009 = CARTESIAN_POINT('',(6.32,-5.76,1.67)); +#72010 = LINE('',#72011,#72012); +#72011 = CARTESIAN_POINT('',(6.32,-5.76,1.57)); +#72012 = VECTOR('',#72013,1.); +#72013 = DIRECTION('',(0.,0.,1.)); +#72014 = ORIENTED_EDGE('',*,*,#72015,.T.); +#72015 = EDGE_CURVE('',#72008,#72016,#72018,.T.); +#72016 = VERTEX_POINT('',#72017); +#72017 = CARTESIAN_POINT('',(6.22,-5.76,1.57)); +#72018 = LINE('',#72019,#72020); +#72019 = CARTESIAN_POINT('',(6.2075,-5.76,1.5575)); +#72020 = VECTOR('',#72021,1.); +#72021 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72022 = ORIENTED_EDGE('',*,*,#72023,.F.); +#72023 = EDGE_CURVE('',#72024,#72016,#72026,.T.); +#72024 = VERTEX_POINT('',#72025); +#72025 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72026 = LINE('',#72027,#72028); +#72027 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72028 = VECTOR('',#72029,1.); +#72029 = DIRECTION('',(1.,0.,0.)); +#72030 = ORIENTED_EDGE('',*,*,#72031,.T.); +#72031 = EDGE_CURVE('',#72024,#72032,#72034,.T.); +#72032 = VERTEX_POINT('',#72033); +#72033 = CARTESIAN_POINT('',(6.07,-5.76,2.17)); +#72034 = LINE('',#72035,#72036); +#72035 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72036 = VECTOR('',#72037,1.); +#72037 = DIRECTION('',(0.,0.,1.)); +#72038 = ORIENTED_EDGE('',*,*,#72039,.T.); +#72039 = EDGE_CURVE('',#72032,#71986,#72040,.T.); +#72040 = LINE('',#72041,#72042); +#72041 = CARTESIAN_POINT('',(6.07,-5.76,2.17)); +#72042 = VECTOR('',#72043,1.); +#72043 = DIRECTION('',(1.,0.,0.)); +#72044 = ORIENTED_EDGE('',*,*,#71985,.F.); +#72045 = PLANE('',#72046); +#72046 = AXIS2_PLACEMENT_3D('',#72047,#72048,#72049); +#72047 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72048 = DIRECTION('',(0.,1.,0.)); +#72049 = DIRECTION('',(1.,0.,0.)); +#72050 = ADVANCED_FACE('',(#72051),#72076,.T.); +#72051 = FACE_BOUND('',#72052,.T.); +#72052 = EDGE_LOOP('',(#72053,#72054,#72062,#72070)); +#72053 = ORIENTED_EDGE('',*,*,#72031,.T.); +#72054 = ORIENTED_EDGE('',*,*,#72055,.T.); +#72055 = EDGE_CURVE('',#72032,#72056,#72058,.T.); +#72056 = VERTEX_POINT('',#72057); +#72057 = CARTESIAN_POINT('',(6.07,-7.26,2.17)); +#72058 = LINE('',#72059,#72060); +#72059 = CARTESIAN_POINT('',(6.07,-5.76,2.17)); +#72060 = VECTOR('',#72061,1.); +#72061 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72062 = ORIENTED_EDGE('',*,*,#72063,.F.); +#72063 = EDGE_CURVE('',#72064,#72056,#72066,.T.); +#72064 = VERTEX_POINT('',#72065); +#72065 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72066 = LINE('',#72067,#72068); +#72067 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72068 = VECTOR('',#72069,1.); +#72069 = DIRECTION('',(0.,0.,1.)); +#72070 = ORIENTED_EDGE('',*,*,#72071,.F.); +#72071 = EDGE_CURVE('',#72024,#72064,#72072,.T.); +#72072 = LINE('',#72073,#72074); +#72073 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72074 = VECTOR('',#72075,1.); +#72075 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72076 = PLANE('',#72077); +#72077 = AXIS2_PLACEMENT_3D('',#72078,#72079,#72080); +#72078 = CARTESIAN_POINT('',(6.07,-5.76,1.57)); +#72079 = DIRECTION('',(1.,0.,0.)); +#72080 = DIRECTION('',(0.,-1.,0.)); +#72081 = ADVANCED_FACE('',(#72082),#72123,.T.); +#72082 = FACE_BOUND('',#72083,.T.); +#72083 = EDGE_LOOP('',(#72084,#72094,#72102,#72108,#72109,#72117)); +#72084 = ORIENTED_EDGE('',*,*,#72085,.F.); +#72085 = EDGE_CURVE('',#72086,#72088,#72090,.T.); +#72086 = VERTEX_POINT('',#72087); +#72087 = CARTESIAN_POINT('',(6.32,-7.26,1.67)); +#72088 = VERTEX_POINT('',#72089); +#72089 = CARTESIAN_POINT('',(6.32,-7.26,2.07)); +#72090 = LINE('',#72091,#72092); +#72091 = CARTESIAN_POINT('',(6.32,-7.26,1.57)); +#72092 = VECTOR('',#72093,1.); +#72093 = DIRECTION('',(0.,0.,1.)); +#72094 = ORIENTED_EDGE('',*,*,#72095,.F.); +#72095 = EDGE_CURVE('',#72096,#72086,#72098,.T.); +#72096 = VERTEX_POINT('',#72097); +#72097 = CARTESIAN_POINT('',(6.22,-7.26,1.57)); +#72098 = LINE('',#72099,#72100); +#72099 = CARTESIAN_POINT('',(6.2075,-7.26,1.5575)); +#72100 = VECTOR('',#72101,1.); +#72101 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72102 = ORIENTED_EDGE('',*,*,#72103,.F.); +#72103 = EDGE_CURVE('',#72064,#72096,#72104,.T.); +#72104 = LINE('',#72105,#72106); +#72105 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72106 = VECTOR('',#72107,1.); +#72107 = DIRECTION('',(1.,0.,0.)); +#72108 = ORIENTED_EDGE('',*,*,#72063,.T.); +#72109 = ORIENTED_EDGE('',*,*,#72110,.T.); +#72110 = EDGE_CURVE('',#72056,#72111,#72113,.T.); +#72111 = VERTEX_POINT('',#72112); +#72112 = CARTESIAN_POINT('',(6.22,-7.26,2.17)); +#72113 = LINE('',#72114,#72115); +#72114 = CARTESIAN_POINT('',(6.07,-7.26,2.17)); +#72115 = VECTOR('',#72116,1.); +#72116 = DIRECTION('',(1.,0.,0.)); +#72117 = ORIENTED_EDGE('',*,*,#72118,.T.); +#72118 = EDGE_CURVE('',#72111,#72088,#72119,.T.); +#72119 = LINE('',#72120,#72121); +#72120 = CARTESIAN_POINT('',(6.3575,-7.26,2.0325)); +#72121 = VECTOR('',#72122,1.); +#72122 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72123 = PLANE('',#72124); +#72124 = AXIS2_PLACEMENT_3D('',#72125,#72126,#72127); +#72125 = CARTESIAN_POINT('',(6.07,-7.26,1.57)); +#72126 = DIRECTION('',(0.,1.,0.)); +#72127 = DIRECTION('',(1.,0.,0.)); +#72128 = ADVANCED_FACE('',(#72129),#72154,.T.); +#72129 = FACE_BOUND('',#72130,.T.); +#72130 = EDGE_LOOP('',(#72131,#72132,#72140,#72148)); +#72131 = ORIENTED_EDGE('',*,*,#72118,.F.); +#72132 = ORIENTED_EDGE('',*,*,#72133,.T.); +#72133 = EDGE_CURVE('',#72111,#72134,#72136,.T.); +#72134 = VERTEX_POINT('',#72135); +#72135 = CARTESIAN_POINT('',(6.22,-8.06,2.17)); +#72136 = LINE('',#72137,#72138); +#72137 = CARTESIAN_POINT('',(6.22,-7.26,2.17)); +#72138 = VECTOR('',#72139,1.); +#72139 = DIRECTION('',(0.,-1.,0.)); +#72140 = ORIENTED_EDGE('',*,*,#72141,.T.); +#72141 = EDGE_CURVE('',#72134,#72142,#72144,.T.); +#72142 = VERTEX_POINT('',#72143); +#72143 = CARTESIAN_POINT('',(6.32,-7.76,2.07)); +#72144 = LINE('',#72145,#72146); +#72145 = CARTESIAN_POINT('',(6.406363636364,-7.500909090909, + 1.983636363636)); +#72146 = VECTOR('',#72147,1.); +#72147 = DIRECTION('',(0.301511344578,0.904534033733,-0.301511344578)); +#72148 = ORIENTED_EDGE('',*,*,#72149,.F.); +#72149 = EDGE_CURVE('',#72088,#72142,#72150,.T.); +#72150 = LINE('',#72151,#72152); +#72151 = CARTESIAN_POINT('',(6.32,-7.26,2.07)); +#72152 = VECTOR('',#72153,1.); +#72153 = DIRECTION('',(0.,-1.,0.)); +#72154 = PLANE('',#72155); +#72155 = AXIS2_PLACEMENT_3D('',#72156,#72157,#72158); +#72156 = CARTESIAN_POINT('',(6.27,-7.26,2.12)); +#72157 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72158 = DIRECTION('',(0.,-1.,0.)); +#72159 = ADVANCED_FACE('',(#72160),#72217,.T.); +#72160 = FACE_BOUND('',#72161,.T.); +#72161 = EDGE_LOOP('',(#72162,#72170,#72171,#72179,#72187,#72195,#72203, + #72211)); +#72162 = ORIENTED_EDGE('',*,*,#72163,.T.); +#72163 = EDGE_CURVE('',#72164,#72142,#72166,.T.); +#72164 = VERTEX_POINT('',#72165); +#72165 = CARTESIAN_POINT('',(6.32,-7.76,1.67)); +#72166 = LINE('',#72167,#72168); +#72167 = CARTESIAN_POINT('',(6.32,-7.76,1.57)); +#72168 = VECTOR('',#72169,1.); +#72169 = DIRECTION('',(0.,0.,1.)); +#72170 = ORIENTED_EDGE('',*,*,#72141,.F.); +#72171 = ORIENTED_EDGE('',*,*,#72172,.T.); +#72172 = EDGE_CURVE('',#72134,#72173,#72175,.T.); +#72173 = VERTEX_POINT('',#72174); +#72174 = CARTESIAN_POINT('',(6.103333333333,-8.41,2.17)); +#72175 = LINE('',#72176,#72177); +#72176 = CARTESIAN_POINT('',(6.32,-7.76,2.17)); +#72177 = VECTOR('',#72178,1.); +#72178 = DIRECTION('',(-0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72179 = ORIENTED_EDGE('',*,*,#72180,.T.); +#72180 = EDGE_CURVE('',#72173,#72181,#72183,.T.); +#72181 = VERTEX_POINT('',#72182); +#72182 = CARTESIAN_POINT('',(6.07,-8.51,2.07)); +#72183 = LINE('',#72184,#72185); +#72184 = CARTESIAN_POINT('',(5.941315789474,-8.896052631579, + 1.683947368421)); +#72185 = VECTOR('',#72186,1.); +#72186 = DIRECTION('',(-0.229415733871,-0.688247201612,-0.688247201612) + ); +#72187 = ORIENTED_EDGE('',*,*,#72188,.F.); +#72188 = EDGE_CURVE('',#72189,#72181,#72191,.T.); +#72189 = VERTEX_POINT('',#72190); +#72190 = CARTESIAN_POINT('',(6.07,-8.51,1.67)); +#72191 = LINE('',#72192,#72193); +#72192 = CARTESIAN_POINT('',(6.07,-8.51,1.57)); +#72193 = VECTOR('',#72194,1.); +#72194 = DIRECTION('',(0.,0.,1.)); +#72195 = ORIENTED_EDGE('',*,*,#72196,.F.); +#72196 = EDGE_CURVE('',#72197,#72189,#72199,.T.); +#72197 = VERTEX_POINT('',#72198); +#72198 = CARTESIAN_POINT('',(6.103333333333,-8.41,1.57)); +#72199 = LINE('',#72200,#72201); +#72200 = CARTESIAN_POINT('',(5.988684210526,-8.753947368421, + 1.913947368421)); +#72201 = VECTOR('',#72202,1.); +#72202 = DIRECTION('',(-0.229415733871,-0.688247201612,0.688247201612)); +#72203 = ORIENTED_EDGE('',*,*,#72204,.F.); +#72204 = EDGE_CURVE('',#72205,#72197,#72207,.T.); +#72205 = VERTEX_POINT('',#72206); +#72206 = CARTESIAN_POINT('',(6.22,-8.06,1.57)); +#72207 = LINE('',#72208,#72209); +#72208 = CARTESIAN_POINT('',(6.32,-7.76,1.57)); +#72209 = VECTOR('',#72210,1.); +#72210 = DIRECTION('',(-0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72211 = ORIENTED_EDGE('',*,*,#72212,.T.); +#72212 = EDGE_CURVE('',#72205,#72164,#72213,.T.); +#72213 = LINE('',#72214,#72215); +#72214 = CARTESIAN_POINT('',(6.379090909091,-7.582727272727, + 1.729090909091)); +#72215 = VECTOR('',#72216,1.); +#72216 = DIRECTION('',(0.301511344578,0.904534033733,0.301511344578)); +#72217 = PLANE('',#72218); +#72218 = AXIS2_PLACEMENT_3D('',#72219,#72220,#72221); +#72219 = CARTESIAN_POINT('',(6.32,-7.76,1.57)); +#72220 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#72221 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#72222 = ADVANCED_FACE('',(#72223),#72248,.T.); +#72223 = FACE_BOUND('',#72224,.T.); +#72224 = EDGE_LOOP('',(#72225,#72235,#72241,#72242)); +#72225 = ORIENTED_EDGE('',*,*,#72226,.F.); +#72226 = EDGE_CURVE('',#72227,#72229,#72231,.T.); +#72227 = VERTEX_POINT('',#72228); +#72228 = CARTESIAN_POINT('',(-0.153333333333,-8.41,1.57)); +#72229 = VERTEX_POINT('',#72230); +#72230 = CARTESIAN_POINT('',(-0.12,-8.51,1.67)); +#72231 = LINE('',#72232,#72233); +#72232 = CARTESIAN_POINT('',(-0.201578947368,-8.265263157895, + 1.425263157895)); +#72233 = VECTOR('',#72234,1.); +#72234 = DIRECTION('',(0.229415733871,-0.688247201612,0.688247201612)); +#72235 = ORIENTED_EDGE('',*,*,#72236,.T.); +#72236 = EDGE_CURVE('',#72227,#72197,#72237,.T.); +#72237 = LINE('',#72238,#72239); +#72238 = CARTESIAN_POINT('',(-0.12,-8.41,1.57)); +#72239 = VECTOR('',#72240,1.); +#72240 = DIRECTION('',(1.,0.,0.)); +#72241 = ORIENTED_EDGE('',*,*,#72196,.T.); +#72242 = ORIENTED_EDGE('',*,*,#72243,.F.); +#72243 = EDGE_CURVE('',#72229,#72189,#72244,.T.); +#72244 = LINE('',#72245,#72246); +#72245 = CARTESIAN_POINT('',(-0.12,-8.51,1.67)); +#72246 = VECTOR('',#72247,1.); +#72247 = DIRECTION('',(1.,0.,0.)); +#72248 = PLANE('',#72249); +#72249 = AXIS2_PLACEMENT_3D('',#72250,#72251,#72252); +#72250 = CARTESIAN_POINT('',(-0.12,-8.46,1.62)); +#72251 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#72252 = DIRECTION('',(1.,0.,0.)); +#72253 = ADVANCED_FACE('',(#72254),#72311,.F.); +#72254 = FACE_BOUND('',#72255,.F.); +#72255 = EDGE_LOOP('',(#72256,#72266,#72274,#72282,#72290,#72296,#72297, + #72305)); +#72256 = ORIENTED_EDGE('',*,*,#72257,.T.); +#72257 = EDGE_CURVE('',#72258,#72260,#72262,.T.); +#72258 = VERTEX_POINT('',#72259); +#72259 = CARTESIAN_POINT('',(-0.37,-7.76,1.67)); +#72260 = VERTEX_POINT('',#72261); +#72261 = CARTESIAN_POINT('',(-0.37,-7.76,2.07)); +#72262 = LINE('',#72263,#72264); +#72263 = CARTESIAN_POINT('',(-0.37,-7.76,1.57)); +#72264 = VECTOR('',#72265,1.); +#72265 = DIRECTION('',(0.,0.,1.)); +#72266 = ORIENTED_EDGE('',*,*,#72267,.F.); +#72267 = EDGE_CURVE('',#72268,#72260,#72270,.T.); +#72268 = VERTEX_POINT('',#72269); +#72269 = CARTESIAN_POINT('',(-0.27,-8.06,2.17)); +#72270 = LINE('',#72271,#72272); +#72271 = CARTESIAN_POINT('',(-0.456363636364,-7.500909090909, + 1.983636363636)); +#72272 = VECTOR('',#72273,1.); +#72273 = DIRECTION('',(-0.301511344578,0.904534033733,-0.301511344578)); +#72274 = ORIENTED_EDGE('',*,*,#72275,.T.); +#72275 = EDGE_CURVE('',#72268,#72276,#72278,.T.); +#72276 = VERTEX_POINT('',#72277); +#72277 = CARTESIAN_POINT('',(-0.153333333333,-8.41,2.17)); +#72278 = LINE('',#72279,#72280); +#72279 = CARTESIAN_POINT('',(-0.37,-7.76,2.17)); +#72280 = VECTOR('',#72281,1.); +#72281 = DIRECTION('',(0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72282 = ORIENTED_EDGE('',*,*,#72283,.T.); +#72283 = EDGE_CURVE('',#72276,#72284,#72286,.T.); +#72284 = VERTEX_POINT('',#72285); +#72285 = CARTESIAN_POINT('',(-0.12,-8.51,2.07)); +#72286 = LINE('',#72287,#72288); +#72287 = CARTESIAN_POINT('',(-0.154210526316,-8.407368421053, + 2.172631578947)); +#72288 = VECTOR('',#72289,1.); +#72289 = DIRECTION('',(0.229415733871,-0.688247201612,-0.688247201612)); +#72290 = ORIENTED_EDGE('',*,*,#72291,.F.); +#72291 = EDGE_CURVE('',#72229,#72284,#72292,.T.); +#72292 = LINE('',#72293,#72294); +#72293 = CARTESIAN_POINT('',(-0.12,-8.51,1.57)); +#72294 = VECTOR('',#72295,1.); +#72295 = DIRECTION('',(0.,0.,1.)); +#72296 = ORIENTED_EDGE('',*,*,#72226,.F.); +#72297 = ORIENTED_EDGE('',*,*,#72298,.F.); +#72298 = EDGE_CURVE('',#72299,#72227,#72301,.T.); +#72299 = VERTEX_POINT('',#72300); +#72300 = CARTESIAN_POINT('',(-0.27,-8.06,1.57)); +#72301 = LINE('',#72302,#72303); +#72302 = CARTESIAN_POINT('',(-0.37,-7.76,1.57)); +#72303 = VECTOR('',#72304,1.); +#72304 = DIRECTION('',(0.316227766017,-0.948683298051, + -2.099999999999E-16)); +#72305 = ORIENTED_EDGE('',*,*,#72306,.T.); +#72306 = EDGE_CURVE('',#72299,#72258,#72307,.T.); +#72307 = LINE('',#72308,#72309); +#72308 = CARTESIAN_POINT('',(-0.429090909091,-7.582727272727, + 1.729090909091)); +#72309 = VECTOR('',#72310,1.); +#72310 = DIRECTION('',(-0.301511344578,0.904534033733,0.301511344578)); +#72311 = PLANE('',#72312); +#72312 = AXIS2_PLACEMENT_3D('',#72313,#72314,#72315); +#72313 = CARTESIAN_POINT('',(-0.37,-7.76,1.57)); +#72314 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#72315 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#72316 = ADVANCED_FACE('',(#72317),#72342,.T.); +#72317 = FACE_BOUND('',#72318,.T.); +#72318 = EDGE_LOOP('',(#72319,#72329,#72335,#72336)); +#72319 = ORIENTED_EDGE('',*,*,#72320,.F.); +#72320 = EDGE_CURVE('',#72321,#72323,#72325,.T.); +#72321 = VERTEX_POINT('',#72322); +#72322 = CARTESIAN_POINT('',(-0.27,-7.26,1.57)); +#72323 = VERTEX_POINT('',#72324); +#72324 = CARTESIAN_POINT('',(-0.37,-7.26,1.67)); +#72325 = LINE('',#72326,#72327); +#72326 = CARTESIAN_POINT('',(-0.32,-7.26,1.62)); +#72327 = VECTOR('',#72328,1.); +#72328 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#72329 = ORIENTED_EDGE('',*,*,#72330,.T.); +#72330 = EDGE_CURVE('',#72321,#72299,#72331,.T.); +#72331 = LINE('',#72332,#72333); +#72332 = CARTESIAN_POINT('',(-0.27,-7.26,1.57)); +#72333 = VECTOR('',#72334,1.); +#72334 = DIRECTION('',(0.,-1.,0.)); +#72335 = ORIENTED_EDGE('',*,*,#72306,.T.); +#72336 = ORIENTED_EDGE('',*,*,#72337,.F.); +#72337 = EDGE_CURVE('',#72323,#72258,#72338,.T.); +#72338 = LINE('',#72339,#72340); +#72339 = CARTESIAN_POINT('',(-0.37,-7.26,1.67)); +#72340 = VECTOR('',#72341,1.); +#72341 = DIRECTION('',(0.,-1.,0.)); +#72342 = PLANE('',#72343); +#72343 = AXIS2_PLACEMENT_3D('',#72344,#72345,#72346); +#72344 = CARTESIAN_POINT('',(-0.32,-7.26,1.62)); +#72345 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72346 = DIRECTION('',(0.,-1.,-0.)); +#72347 = ADVANCED_FACE('',(#72348),#72389,.T.); +#72348 = FACE_BOUND('',#72349,.T.); +#72349 = EDGE_LOOP('',(#72350,#72358,#72366,#72374,#72382,#72388)); +#72350 = ORIENTED_EDGE('',*,*,#72351,.T.); +#72351 = EDGE_CURVE('',#72323,#72352,#72354,.T.); +#72352 = VERTEX_POINT('',#72353); +#72353 = CARTESIAN_POINT('',(-0.37,-7.26,2.07)); +#72354 = LINE('',#72355,#72356); +#72355 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72356 = VECTOR('',#72357,1.); +#72357 = DIRECTION('',(0.,0.,1.)); +#72358 = ORIENTED_EDGE('',*,*,#72359,.F.); +#72359 = EDGE_CURVE('',#72360,#72352,#72362,.T.); +#72360 = VERTEX_POINT('',#72361); +#72361 = CARTESIAN_POINT('',(-0.27,-7.26,2.17)); +#72362 = LINE('',#72363,#72364); +#72363 = CARTESIAN_POINT('',(-0.47,-7.26,1.97)); +#72364 = VECTOR('',#72365,1.); +#72365 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72366 = ORIENTED_EDGE('',*,*,#72367,.T.); +#72367 = EDGE_CURVE('',#72360,#72368,#72370,.T.); +#72368 = VERTEX_POINT('',#72369); +#72369 = CARTESIAN_POINT('',(-0.12,-7.26,2.17)); +#72370 = LINE('',#72371,#72372); +#72371 = CARTESIAN_POINT('',(-0.37,-7.26,2.17)); +#72372 = VECTOR('',#72373,1.); +#72373 = DIRECTION('',(1.,0.,0.)); +#72374 = ORIENTED_EDGE('',*,*,#72375,.F.); +#72375 = EDGE_CURVE('',#72376,#72368,#72378,.T.); +#72376 = VERTEX_POINT('',#72377); +#72377 = CARTESIAN_POINT('',(-0.12,-7.26,1.57)); +#72378 = LINE('',#72379,#72380); +#72379 = CARTESIAN_POINT('',(-0.12,-7.26,1.57)); +#72380 = VECTOR('',#72381,1.); +#72381 = DIRECTION('',(0.,0.,1.)); +#72382 = ORIENTED_EDGE('',*,*,#72383,.F.); +#72383 = EDGE_CURVE('',#72321,#72376,#72384,.T.); +#72384 = LINE('',#72385,#72386); +#72385 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72386 = VECTOR('',#72387,1.); +#72387 = DIRECTION('',(1.,0.,0.)); +#72388 = ORIENTED_EDGE('',*,*,#72320,.T.); +#72389 = PLANE('',#72390); +#72390 = AXIS2_PLACEMENT_3D('',#72391,#72392,#72393); +#72391 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72392 = DIRECTION('',(0.,1.,0.)); +#72393 = DIRECTION('',(1.,0.,0.)); +#72394 = ADVANCED_FACE('',(#72395),#72420,.F.); +#72395 = FACE_BOUND('',#72396,.F.); +#72396 = EDGE_LOOP('',(#72397,#72407,#72413,#72414)); +#72397 = ORIENTED_EDGE('',*,*,#72398,.T.); +#72398 = EDGE_CURVE('',#72399,#72401,#72403,.T.); +#72399 = VERTEX_POINT('',#72400); +#72400 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72401 = VERTEX_POINT('',#72402); +#72402 = CARTESIAN_POINT('',(-0.12,-5.76,2.17)); +#72403 = LINE('',#72404,#72405); +#72404 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72405 = VECTOR('',#72406,1.); +#72406 = DIRECTION('',(0.,0.,1.)); +#72407 = ORIENTED_EDGE('',*,*,#72408,.T.); +#72408 = EDGE_CURVE('',#72401,#72368,#72409,.T.); +#72409 = LINE('',#72410,#72411); +#72410 = CARTESIAN_POINT('',(-0.12,-5.76,2.17)); +#72411 = VECTOR('',#72412,1.); +#72412 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72413 = ORIENTED_EDGE('',*,*,#72375,.F.); +#72414 = ORIENTED_EDGE('',*,*,#72415,.F.); +#72415 = EDGE_CURVE('',#72399,#72376,#72416,.T.); +#72416 = LINE('',#72417,#72418); +#72417 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72418 = VECTOR('',#72419,1.); +#72419 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72420 = PLANE('',#72421); +#72421 = AXIS2_PLACEMENT_3D('',#72422,#72423,#72424); +#72422 = CARTESIAN_POINT('',(-0.12,-5.76,1.57)); +#72423 = DIRECTION('',(1.,0.,0.)); +#72424 = DIRECTION('',(0.,-1.,0.)); +#72425 = ADVANCED_FACE('',(#72426),#72467,.F.); +#72426 = FACE_BOUND('',#72427,.F.); +#72427 = EDGE_LOOP('',(#72428,#72438,#72446,#72452,#72453,#72461)); +#72428 = ORIENTED_EDGE('',*,*,#72429,.T.); +#72429 = EDGE_CURVE('',#72430,#72432,#72434,.T.); +#72430 = VERTEX_POINT('',#72431); +#72431 = CARTESIAN_POINT('',(-0.37,-5.76,1.67)); +#72432 = VERTEX_POINT('',#72433); +#72433 = CARTESIAN_POINT('',(-0.37,-5.76,2.07)); +#72434 = LINE('',#72435,#72436); +#72435 = CARTESIAN_POINT('',(-0.37,-5.76,1.57)); +#72436 = VECTOR('',#72437,1.); +#72437 = DIRECTION('',(0.,0.,1.)); +#72438 = ORIENTED_EDGE('',*,*,#72439,.T.); +#72439 = EDGE_CURVE('',#72432,#72440,#72442,.T.); +#72440 = VERTEX_POINT('',#72441); +#72441 = CARTESIAN_POINT('',(-0.27,-5.76,2.17)); +#72442 = LINE('',#72443,#72444); +#72443 = CARTESIAN_POINT('',(-0.47,-5.76,1.97)); +#72444 = VECTOR('',#72445,1.); +#72445 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#72446 = ORIENTED_EDGE('',*,*,#72447,.T.); +#72447 = EDGE_CURVE('',#72440,#72401,#72448,.T.); +#72448 = LINE('',#72449,#72450); +#72449 = CARTESIAN_POINT('',(-0.37,-5.76,2.17)); +#72450 = VECTOR('',#72451,1.); +#72451 = DIRECTION('',(1.,0.,0.)); +#72452 = ORIENTED_EDGE('',*,*,#72398,.F.); +#72453 = ORIENTED_EDGE('',*,*,#72454,.F.); +#72454 = EDGE_CURVE('',#72455,#72399,#72457,.T.); +#72455 = VERTEX_POINT('',#72456); +#72456 = CARTESIAN_POINT('',(-0.27,-5.76,1.57)); +#72457 = LINE('',#72458,#72459); +#72458 = CARTESIAN_POINT('',(-0.37,-5.76,1.57)); +#72459 = VECTOR('',#72460,1.); +#72460 = DIRECTION('',(1.,0.,0.)); +#72461 = ORIENTED_EDGE('',*,*,#72462,.F.); +#72462 = EDGE_CURVE('',#72430,#72455,#72463,.T.); +#72463 = LINE('',#72464,#72465); +#72464 = CARTESIAN_POINT('',(-0.32,-5.76,1.62)); +#72465 = VECTOR('',#72466,1.); +#72466 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72467 = PLANE('',#72468); +#72468 = AXIS2_PLACEMENT_3D('',#72469,#72470,#72471); +#72469 = CARTESIAN_POINT('',(-0.37,-5.76,1.57)); +#72470 = DIRECTION('',(0.,1.,0.)); +#72471 = DIRECTION('',(1.,0.,0.)); +#72472 = ADVANCED_FACE('',(#72473),#72498,.T.); +#72473 = FACE_BOUND('',#72474,.F.); +#72474 = EDGE_LOOP('',(#72475,#72485,#72491,#72492)); +#72475 = ORIENTED_EDGE('',*,*,#72476,.F.); +#72476 = EDGE_CURVE('',#72477,#72479,#72481,.T.); +#72477 = VERTEX_POINT('',#72478); +#72478 = CARTESIAN_POINT('',(-0.37,-5.38,1.67)); +#72479 = VERTEX_POINT('',#72480); +#72480 = CARTESIAN_POINT('',(-0.27,-5.38,1.57)); +#72481 = LINE('',#72482,#72483); +#72482 = CARTESIAN_POINT('',(0.441250000003,-5.38,0.858749999997)); +#72483 = VECTOR('',#72484,1.); +#72484 = DIRECTION('',(0.707106781187,5.199999999997E-16,-0.707106781187 + )); +#72485 = ORIENTED_EDGE('',*,*,#72486,.T.); +#72486 = EDGE_CURVE('',#72477,#72430,#72487,.T.); +#72487 = LINE('',#72488,#72489); +#72488 = CARTESIAN_POINT('',(-0.37,-5.38,1.67)); +#72489 = VECTOR('',#72490,1.); +#72490 = DIRECTION('',(0.,-1.,0.)); +#72491 = ORIENTED_EDGE('',*,*,#72462,.T.); +#72492 = ORIENTED_EDGE('',*,*,#72493,.F.); +#72493 = EDGE_CURVE('',#72479,#72455,#72494,.T.); +#72494 = LINE('',#72495,#72496); +#72495 = CARTESIAN_POINT('',(-0.27,-5.38,1.57)); +#72496 = VECTOR('',#72497,1.); +#72497 = DIRECTION('',(0.,-1.,0.)); +#72498 = PLANE('',#72499); +#72499 = AXIS2_PLACEMENT_3D('',#72500,#72501,#72502); +#72500 = CARTESIAN_POINT('',(-0.32,-5.38,1.62)); +#72501 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#72502 = DIRECTION('',(0.,1.,0.)); +#72503 = ADVANCED_FACE('',(#72504),#72579,.F.); +#72504 = FACE_BOUND('',#72505,.F.); +#72505 = EDGE_LOOP('',(#72506,#72514,#72522,#72530,#72538,#72547,#72555, + #72564,#72572,#72578)); +#72506 = ORIENTED_EDGE('',*,*,#72507,.T.); +#72507 = EDGE_CURVE('',#72479,#72508,#72510,.T.); +#72508 = VERTEX_POINT('',#72509); +#72509 = CARTESIAN_POINT('',(6.22,-5.38,1.57)); +#72510 = LINE('',#72511,#72512); +#72511 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72512 = VECTOR('',#72513,1.); +#72513 = DIRECTION('',(1.,0.,0.)); +#72514 = ORIENTED_EDGE('',*,*,#72515,.F.); +#72515 = EDGE_CURVE('',#72516,#72508,#72518,.T.); +#72516 = VERTEX_POINT('',#72517); +#72517 = CARTESIAN_POINT('',(6.32,-5.38,1.67)); +#72518 = LINE('',#72519,#72520); +#72519 = CARTESIAN_POINT('',(5.508749999993,-5.38,0.858749999993)); +#72520 = VECTOR('',#72521,1.); +#72521 = DIRECTION('',(-0.707106781187,5.199999999997E-16, + -0.707106781187)); +#72522 = ORIENTED_EDGE('',*,*,#72523,.F.); +#72523 = EDGE_CURVE('',#72524,#72516,#72526,.T.); +#72524 = VERTEX_POINT('',#72525); +#72525 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72526 = LINE('',#72527,#72528); +#72527 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72528 = VECTOR('',#72529,1.); +#72529 = DIRECTION('',(0.,0.,1.)); +#72530 = ORIENTED_EDGE('',*,*,#72531,.T.); +#72531 = EDGE_CURVE('',#72524,#72532,#72534,.T.); +#72532 = VERTEX_POINT('',#72533); +#72533 = CARTESIAN_POINT('',(6.32,-5.38,1.539999999982)); +#72534 = LINE('',#72535,#72536); +#72535 = CARTESIAN_POINT('',(6.32,-5.38,2.469999999982)); +#72536 = VECTOR('',#72537,1.); +#72537 = DIRECTION('',(0.,2.2E-16,-1.)); +#72538 = ORIENTED_EDGE('',*,*,#72539,.T.); +#72539 = EDGE_CURVE('',#72532,#72540,#72542,.T.); +#72540 = VERTEX_POINT('',#72541); +#72541 = CARTESIAN_POINT('',(6.05,-5.38,1.269999999982)); +#72542 = CIRCLE('',#72543,0.27); +#72543 = AXIS2_PLACEMENT_3D('',#72544,#72545,#72546); +#72544 = CARTESIAN_POINT('',(6.05,-5.38,1.539999999982)); +#72545 = DIRECTION('',(0.,1.,2.2E-16)); +#72546 = DIRECTION('',(0.,2.2E-16,-1.)); +#72547 = ORIENTED_EDGE('',*,*,#72548,.F.); +#72548 = EDGE_CURVE('',#72549,#72540,#72551,.T.); +#72549 = VERTEX_POINT('',#72550); +#72550 = CARTESIAN_POINT('',(-0.1,-5.38,1.269999999982)); +#72551 = LINE('',#72552,#72553); +#72552 = CARTESIAN_POINT('',(-0.370000000078,-5.38,1.269999999982)); +#72553 = VECTOR('',#72554,1.); +#72554 = DIRECTION('',(1.,0.,0.)); +#72555 = ORIENTED_EDGE('',*,*,#72556,.T.); +#72556 = EDGE_CURVE('',#72549,#72557,#72559,.T.); +#72557 = VERTEX_POINT('',#72558); +#72558 = CARTESIAN_POINT('',(-0.37,-5.38,1.539999999982)); +#72559 = CIRCLE('',#72560,0.27); +#72560 = AXIS2_PLACEMENT_3D('',#72561,#72562,#72563); +#72561 = CARTESIAN_POINT('',(-0.1,-5.38,1.539999999982)); +#72562 = DIRECTION('',(0.,1.,2.2E-16)); +#72563 = DIRECTION('',(0.,2.2E-16,-1.)); +#72564 = ORIENTED_EDGE('',*,*,#72565,.F.); +#72565 = EDGE_CURVE('',#72566,#72557,#72568,.T.); +#72566 = VERTEX_POINT('',#72567); +#72567 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72568 = LINE('',#72569,#72570); +#72569 = CARTESIAN_POINT('',(-0.37,-5.38,2.469999999982)); +#72570 = VECTOR('',#72571,1.); +#72571 = DIRECTION('',(0.,2.2E-16,-1.)); +#72572 = ORIENTED_EDGE('',*,*,#72573,.T.); +#72573 = EDGE_CURVE('',#72566,#72477,#72574,.T.); +#72574 = LINE('',#72575,#72576); +#72575 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72576 = VECTOR('',#72577,1.); +#72577 = DIRECTION('',(0.,0.,1.)); +#72578 = ORIENTED_EDGE('',*,*,#72476,.T.); +#72579 = PLANE('',#72580); +#72580 = AXIS2_PLACEMENT_3D('',#72581,#72582,#72583); +#72581 = CARTESIAN_POINT('',(2.974999999991,-5.38,1.86999999998)); +#72582 = DIRECTION('',(0.,1.,9.6E-16)); +#72583 = DIRECTION('',(0.,-9.6E-16,1.)); +#72584 = ADVANCED_FACE('',(#72585),#72601,.F.); +#72585 = FACE_BOUND('',#72586,.F.); +#72586 = EDGE_LOOP('',(#72587,#72588,#72589,#72595)); +#72587 = ORIENTED_EDGE('',*,*,#72429,.F.); +#72588 = ORIENTED_EDGE('',*,*,#72486,.F.); +#72589 = ORIENTED_EDGE('',*,*,#72590,.T.); +#72590 = EDGE_CURVE('',#72477,#71907,#72591,.T.); +#72591 = LINE('',#72592,#72593); +#72592 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72593 = VECTOR('',#72594,1.); +#72594 = DIRECTION('',(0.,0.,1.)); +#72595 = ORIENTED_EDGE('',*,*,#72596,.T.); +#72596 = EDGE_CURVE('',#71907,#72432,#72597,.T.); +#72597 = LINE('',#72598,#72599); +#72598 = CARTESIAN_POINT('',(-0.37,-5.38,2.07)); +#72599 = VECTOR('',#72600,1.); +#72600 = DIRECTION('',(0.,-1.,0.)); +#72601 = PLANE('',#72602); +#72602 = AXIS2_PLACEMENT_3D('',#72603,#72604,#72605); +#72603 = CARTESIAN_POINT('',(-0.37,-5.38,1.57)); +#72604 = DIRECTION('',(1.,0.,0.)); +#72605 = DIRECTION('',(0.,-1.,0.)); +#72606 = ADVANCED_FACE('',(#72607),#72623,.F.); +#72607 = FACE_BOUND('',#72608,.F.); +#72608 = EDGE_LOOP('',(#72609,#72610,#72616,#72617)); +#72609 = ORIENTED_EDGE('',*,*,#72359,.F.); +#72610 = ORIENTED_EDGE('',*,*,#72611,.T.); +#72611 = EDGE_CURVE('',#72360,#72268,#72612,.T.); +#72612 = LINE('',#72613,#72614); +#72613 = CARTESIAN_POINT('',(-0.27,-7.26,2.17)); +#72614 = VECTOR('',#72615,1.); +#72615 = DIRECTION('',(0.,-1.,0.)); +#72616 = ORIENTED_EDGE('',*,*,#72267,.T.); +#72617 = ORIENTED_EDGE('',*,*,#72618,.F.); +#72618 = EDGE_CURVE('',#72352,#72260,#72619,.T.); +#72619 = LINE('',#72620,#72621); +#72620 = CARTESIAN_POINT('',(-0.37,-7.26,2.07)); +#72621 = VECTOR('',#72622,1.); +#72622 = DIRECTION('',(0.,-1.,0.)); +#72623 = PLANE('',#72624); +#72624 = AXIS2_PLACEMENT_3D('',#72625,#72626,#72627); +#72625 = CARTESIAN_POINT('',(-0.32,-7.26,2.12)); +#72626 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72627 = DIRECTION('',(0.,-1.,0.)); +#72628 = ADVANCED_FACE('',(#72629),#72635,.F.); +#72629 = FACE_BOUND('',#72630,.F.); +#72630 = EDGE_LOOP('',(#72631,#72632,#72633,#72634)); +#72631 = ORIENTED_EDGE('',*,*,#72351,.T.); +#72632 = ORIENTED_EDGE('',*,*,#72618,.T.); +#72633 = ORIENTED_EDGE('',*,*,#72257,.F.); +#72634 = ORIENTED_EDGE('',*,*,#72337,.F.); +#72635 = PLANE('',#72636); +#72636 = AXIS2_PLACEMENT_3D('',#72637,#72638,#72639); +#72637 = CARTESIAN_POINT('',(-0.37,-7.26,1.57)); +#72638 = DIRECTION('',(1.,0.,0.)); +#72639 = DIRECTION('',(0.,-1.,0.)); +#72640 = ADVANCED_FACE('',(#72641),#72652,.F.); +#72641 = FACE_BOUND('',#72642,.F.); +#72642 = EDGE_LOOP('',(#72643,#72644,#72650,#72651)); +#72643 = ORIENTED_EDGE('',*,*,#72291,.T.); +#72644 = ORIENTED_EDGE('',*,*,#72645,.T.); +#72645 = EDGE_CURVE('',#72284,#72181,#72646,.T.); +#72646 = LINE('',#72647,#72648); +#72647 = CARTESIAN_POINT('',(-0.12,-8.51,2.07)); +#72648 = VECTOR('',#72649,1.); +#72649 = DIRECTION('',(1.,0.,0.)); +#72650 = ORIENTED_EDGE('',*,*,#72188,.F.); +#72651 = ORIENTED_EDGE('',*,*,#72243,.F.); +#72652 = PLANE('',#72653); +#72653 = AXIS2_PLACEMENT_3D('',#72654,#72655,#72656); +#72654 = CARTESIAN_POINT('',(-0.12,-8.51,1.57)); +#72655 = DIRECTION('',(0.,1.,0.)); +#72656 = DIRECTION('',(1.,0.,0.)); +#72657 = ADVANCED_FACE('',(#72658),#72669,.F.); +#72658 = FACE_BOUND('',#72659,.F.); +#72659 = EDGE_LOOP('',(#72660,#72661,#72667,#72668)); +#72660 = ORIENTED_EDGE('',*,*,#72283,.F.); +#72661 = ORIENTED_EDGE('',*,*,#72662,.T.); +#72662 = EDGE_CURVE('',#72276,#72173,#72663,.T.); +#72663 = LINE('',#72664,#72665); +#72664 = CARTESIAN_POINT('',(-0.12,-8.41,2.17)); +#72665 = VECTOR('',#72666,1.); +#72666 = DIRECTION('',(1.,0.,0.)); +#72667 = ORIENTED_EDGE('',*,*,#72180,.T.); +#72668 = ORIENTED_EDGE('',*,*,#72645,.F.); +#72669 = PLANE('',#72670); +#72670 = AXIS2_PLACEMENT_3D('',#72671,#72672,#72673); +#72671 = CARTESIAN_POINT('',(-0.12,-8.46,2.12)); +#72672 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); +#72673 = DIRECTION('',(1.,0.,0.)); +#72674 = ADVANCED_FACE('',(#72675),#72691,.F.); +#72675 = FACE_BOUND('',#72676,.F.); +#72676 = EDGE_LOOP('',(#72677,#72678,#72684,#72685)); +#72677 = ORIENTED_EDGE('',*,*,#72095,.F.); +#72678 = ORIENTED_EDGE('',*,*,#72679,.T.); +#72679 = EDGE_CURVE('',#72096,#72205,#72680,.T.); +#72680 = LINE('',#72681,#72682); +#72681 = CARTESIAN_POINT('',(6.22,-7.26,1.57)); +#72682 = VECTOR('',#72683,1.); +#72683 = DIRECTION('',(0.,-1.,0.)); +#72684 = ORIENTED_EDGE('',*,*,#72212,.T.); +#72685 = ORIENTED_EDGE('',*,*,#72686,.F.); +#72686 = EDGE_CURVE('',#72086,#72164,#72687,.T.); +#72687 = LINE('',#72688,#72689); +#72688 = CARTESIAN_POINT('',(6.32,-7.26,1.67)); +#72689 = VECTOR('',#72690,1.); +#72690 = DIRECTION('',(0.,-1.,0.)); +#72691 = PLANE('',#72692); +#72692 = AXIS2_PLACEMENT_3D('',#72693,#72694,#72695); +#72693 = CARTESIAN_POINT('',(6.27,-7.26,1.62)); +#72694 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#72695 = DIRECTION('',(0.,-1.,0.)); +#72696 = ADVANCED_FACE('',(#72697),#72703,.T.); +#72697 = FACE_BOUND('',#72698,.T.); +#72698 = EDGE_LOOP('',(#72699,#72700,#72701,#72702)); +#72699 = ORIENTED_EDGE('',*,*,#72085,.T.); +#72700 = ORIENTED_EDGE('',*,*,#72149,.T.); +#72701 = ORIENTED_EDGE('',*,*,#72163,.F.); +#72702 = ORIENTED_EDGE('',*,*,#72686,.F.); +#72703 = PLANE('',#72704); +#72704 = AXIS2_PLACEMENT_3D('',#72705,#72706,#72707); +#72705 = CARTESIAN_POINT('',(6.32,-7.26,1.57)); +#72706 = DIRECTION('',(1.,0.,0.)); +#72707 = DIRECTION('',(0.,-1.,0.)); +#72708 = ADVANCED_FACE('',(#72709),#72730,.F.); +#72709 = FACE_BOUND('',#72710,.F.); +#72710 = EDGE_LOOP('',(#72711,#72712,#72713,#72714,#72715,#72716,#72717, + #72718,#72719,#72720,#72721,#72722,#72728,#72729)); +#72711 = ORIENTED_EDGE('',*,*,#72454,.T.); +#72712 = ORIENTED_EDGE('',*,*,#72415,.T.); +#72713 = ORIENTED_EDGE('',*,*,#72383,.F.); +#72714 = ORIENTED_EDGE('',*,*,#72330,.T.); +#72715 = ORIENTED_EDGE('',*,*,#72298,.T.); +#72716 = ORIENTED_EDGE('',*,*,#72236,.T.); +#72717 = ORIENTED_EDGE('',*,*,#72204,.F.); +#72718 = ORIENTED_EDGE('',*,*,#72679,.F.); +#72719 = ORIENTED_EDGE('',*,*,#72103,.F.); +#72720 = ORIENTED_EDGE('',*,*,#72071,.F.); +#72721 = ORIENTED_EDGE('',*,*,#72023,.T.); +#72722 = ORIENTED_EDGE('',*,*,#72723,.F.); +#72723 = EDGE_CURVE('',#72508,#72016,#72724,.T.); +#72724 = LINE('',#72725,#72726); +#72725 = CARTESIAN_POINT('',(6.22,-5.38,1.57)); +#72726 = VECTOR('',#72727,1.); +#72727 = DIRECTION('',(0.,-1.,0.)); +#72728 = ORIENTED_EDGE('',*,*,#72507,.F.); +#72729 = ORIENTED_EDGE('',*,*,#72493,.T.); +#72730 = PLANE('',#72731); +#72731 = AXIS2_PLACEMENT_3D('',#72732,#72733,#72734); +#72732 = CARTESIAN_POINT('',(2.975,-6.889565694266,1.57)); +#72733 = DIRECTION('',(0.,-2.2E-16,1.)); +#72734 = DIRECTION('',(1.,0.,0.)); +#72735 = ADVANCED_FACE('',(#72736),#72747,.F.); +#72736 = FACE_BOUND('',#72737,.T.); +#72737 = EDGE_LOOP('',(#72738,#72739,#72745,#72746)); +#72738 = ORIENTED_EDGE('',*,*,#72515,.F.); +#72739 = ORIENTED_EDGE('',*,*,#72740,.T.); +#72740 = EDGE_CURVE('',#72516,#72008,#72741,.T.); +#72741 = LINE('',#72742,#72743); +#72742 = CARTESIAN_POINT('',(6.32,-5.38,1.67)); +#72743 = VECTOR('',#72744,1.); +#72744 = DIRECTION('',(0.,-1.,0.)); +#72745 = ORIENTED_EDGE('',*,*,#72015,.T.); +#72746 = ORIENTED_EDGE('',*,*,#72723,.F.); +#72747 = PLANE('',#72748); +#72748 = AXIS2_PLACEMENT_3D('',#72749,#72750,#72751); +#72749 = CARTESIAN_POINT('',(6.27,-5.38,1.62)); +#72750 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#72751 = DIRECTION('',(0.,1.,0.)); +#72752 = ADVANCED_FACE('',(#72753),#72764,.T.); +#72753 = FACE_BOUND('',#72754,.T.); +#72754 = EDGE_LOOP('',(#72755,#72756,#72757,#72763)); +#72755 = ORIENTED_EDGE('',*,*,#72007,.F.); +#72756 = ORIENTED_EDGE('',*,*,#72740,.F.); +#72757 = ORIENTED_EDGE('',*,*,#72758,.T.); +#72758 = EDGE_CURVE('',#72516,#71955,#72759,.T.); +#72759 = LINE('',#72760,#72761); +#72760 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72761 = VECTOR('',#72762,1.); +#72762 = DIRECTION('',(0.,0.,1.)); +#72763 = ORIENTED_EDGE('',*,*,#71977,.T.); +#72764 = PLANE('',#72765); +#72765 = AXIS2_PLACEMENT_3D('',#72766,#72767,#72768); +#72766 = CARTESIAN_POINT('',(6.32,-5.38,1.57)); +#72767 = DIRECTION('',(1.,0.,0.)); +#72768 = DIRECTION('',(0.,-1.,0.)); +#72769 = ADVANCED_FACE('',(#72770),#72781,.F.); +#72770 = FACE_BOUND('',#72771,.T.); +#72771 = EDGE_LOOP('',(#72772,#72773,#72774,#72775)); +#72772 = ORIENTED_EDGE('',*,*,#71906,.F.); +#72773 = ORIENTED_EDGE('',*,*,#72596,.T.); +#72774 = ORIENTED_EDGE('',*,*,#72439,.T.); +#72775 = ORIENTED_EDGE('',*,*,#72776,.F.); +#72776 = EDGE_CURVE('',#71897,#72440,#72777,.T.); +#72777 = LINE('',#72778,#72779); +#72778 = CARTESIAN_POINT('',(-0.27,-5.38,2.17)); +#72779 = VECTOR('',#72780,1.); +#72780 = DIRECTION('',(0.,-1.,0.)); +#72781 = PLANE('',#72782); +#72782 = AXIS2_PLACEMENT_3D('',#72783,#72784,#72785); +#72783 = CARTESIAN_POINT('',(-0.32,-5.38,2.12)); +#72784 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#72785 = DIRECTION('',(0.,1.,0.)); +#72786 = ADVANCED_FACE('',(#72787),#72803,.T.); +#72787 = FACE_BOUND('',#72788,.T.); +#72788 = EDGE_LOOP('',(#72789,#72790,#72791,#72792,#72793,#72794,#72795, + #72796,#72797,#72798,#72799,#72800,#72801,#72802)); +#72789 = ORIENTED_EDGE('',*,*,#72447,.T.); +#72790 = ORIENTED_EDGE('',*,*,#72408,.T.); +#72791 = ORIENTED_EDGE('',*,*,#72367,.F.); +#72792 = ORIENTED_EDGE('',*,*,#72611,.T.); +#72793 = ORIENTED_EDGE('',*,*,#72275,.T.); +#72794 = ORIENTED_EDGE('',*,*,#72662,.T.); +#72795 = ORIENTED_EDGE('',*,*,#72172,.F.); +#72796 = ORIENTED_EDGE('',*,*,#72133,.F.); +#72797 = ORIENTED_EDGE('',*,*,#72110,.F.); +#72798 = ORIENTED_EDGE('',*,*,#72055,.F.); +#72799 = ORIENTED_EDGE('',*,*,#72039,.T.); +#72800 = ORIENTED_EDGE('',*,*,#71993,.F.); +#72801 = ORIENTED_EDGE('',*,*,#71896,.F.); +#72802 = ORIENTED_EDGE('',*,*,#72776,.T.); +#72803 = PLANE('',#72804); +#72804 = AXIS2_PLACEMENT_3D('',#72805,#72806,#72807); +#72805 = CARTESIAN_POINT('',(2.975,-6.889565694266,2.17)); +#72806 = DIRECTION('',(0.,-2.2E-16,1.)); +#72807 = DIRECTION('',(1.,0.,0.)); +#72808 = ADVANCED_FACE('',(#72809),#72824,.T.); +#72809 = FACE_BOUND('',#72810,.T.); +#72810 = EDGE_LOOP('',(#72811,#72812,#72813,#72814,#72815,#72816,#72817, + #72818)); +#72811 = ORIENTED_EDGE('',*,*,#71537,.F.); +#72812 = ORIENTED_EDGE('',*,*,#71881,.T.); +#72813 = ORIENTED_EDGE('',*,*,#71946,.T.); +#72814 = ORIENTED_EDGE('',*,*,#71954,.T.); +#72815 = ORIENTED_EDGE('',*,*,#72758,.F.); +#72816 = ORIENTED_EDGE('',*,*,#72523,.F.); +#72817 = ORIENTED_EDGE('',*,*,#72531,.T.); +#72818 = ORIENTED_EDGE('',*,*,#72819,.F.); +#72819 = EDGE_CURVE('',#71529,#72532,#72820,.T.); +#72820 = LINE('',#72821,#72822); +#72821 = CARTESIAN_POINT('',(6.32,-4.06,1.539999999982)); +#72822 = VECTOR('',#72823,1.); +#72823 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72824 = PLANE('',#72825); +#72825 = AXIS2_PLACEMENT_3D('',#72826,#72827,#72828); +#72826 = CARTESIAN_POINT('',(6.32,-4.06,2.469999999982)); +#72827 = DIRECTION('',(1.,0.,0.)); +#72828 = DIRECTION('',(0.,2.2E-16,-1.)); +#72829 = ADVANCED_FACE('',(#72830),#72841,.T.); +#72830 = FACE_BOUND('',#72831,.T.); +#72831 = EDGE_LOOP('',(#72832,#72833,#72834,#72840)); +#72832 = ORIENTED_EDGE('',*,*,#72819,.T.); +#72833 = ORIENTED_EDGE('',*,*,#72539,.T.); +#72834 = ORIENTED_EDGE('',*,*,#72835,.F.); +#72835 = EDGE_CURVE('',#71521,#72540,#72836,.T.); +#72836 = LINE('',#72837,#72838); +#72837 = CARTESIAN_POINT('',(6.05,-4.06,1.269999999982)); +#72838 = VECTOR('',#72839,1.); +#72839 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72840 = ORIENTED_EDGE('',*,*,#71528,.F.); +#72841 = CYLINDRICAL_SURFACE('',#72842,0.27); +#72842 = AXIS2_PLACEMENT_3D('',#72843,#72844,#72845); +#72843 = CARTESIAN_POINT('',(6.05,-4.06,1.539999999982)); +#72844 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72845 = DIRECTION('',(1.,0.,0.)); +#72846 = ADVANCED_FACE('',(#72847),#72858,.F.); +#72847 = FACE_BOUND('',#72848,.F.); +#72848 = EDGE_LOOP('',(#72849,#72850,#72856,#72857)); +#72849 = ORIENTED_EDGE('',*,*,#71520,.F.); +#72850 = ORIENTED_EDGE('',*,*,#72851,.T.); +#72851 = EDGE_CURVE('',#71512,#72549,#72852,.T.); +#72852 = LINE('',#72853,#72854); +#72853 = CARTESIAN_POINT('',(-0.1,-4.06,1.269999999982)); +#72854 = VECTOR('',#72855,1.); +#72855 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72856 = ORIENTED_EDGE('',*,*,#72548,.T.); +#72857 = ORIENTED_EDGE('',*,*,#72835,.F.); +#72858 = PLANE('',#72859); +#72859 = AXIS2_PLACEMENT_3D('',#72860,#72861,#72862); +#72860 = CARTESIAN_POINT('',(-0.370000000078,-4.06,1.269999999982)); +#72861 = DIRECTION('',(0.,-2.2E-16,1.)); +#72862 = DIRECTION('',(1.,0.,0.)); +#72863 = ADVANCED_FACE('',(#72864),#72875,.T.); +#72864 = FACE_BOUND('',#72865,.T.); +#72865 = EDGE_LOOP('',(#72866,#72867,#72868,#72874)); +#72866 = ORIENTED_EDGE('',*,*,#72851,.T.); +#72867 = ORIENTED_EDGE('',*,*,#72556,.T.); +#72868 = ORIENTED_EDGE('',*,*,#72869,.F.); +#72869 = EDGE_CURVE('',#71504,#72557,#72870,.T.); +#72870 = LINE('',#72871,#72872); +#72871 = CARTESIAN_POINT('',(-0.37,-4.06,1.539999999982)); +#72872 = VECTOR('',#72873,1.); +#72873 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72874 = ORIENTED_EDGE('',*,*,#71511,.F.); +#72875 = CYLINDRICAL_SURFACE('',#72876,0.27); +#72876 = AXIS2_PLACEMENT_3D('',#72877,#72878,#72879); +#72877 = CARTESIAN_POINT('',(-0.1,-4.06,1.539999999982)); +#72878 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72879 = DIRECTION('',(0.,2.2E-16,-1.)); +#72880 = ADVANCED_FACE('',(#72881),#72896,.F.); +#72881 = FACE_BOUND('',#72882,.F.); +#72882 = EDGE_LOOP('',(#72883,#72884,#72890,#72891,#72892,#72893,#72894, + #72895)); +#72883 = ORIENTED_EDGE('',*,*,#71503,.F.); +#72884 = ORIENTED_EDGE('',*,*,#72885,.T.); +#72885 = EDGE_CURVE('',#71495,#71923,#72886,.T.); +#72886 = LINE('',#72887,#72888); +#72887 = CARTESIAN_POINT('',(-0.37,-4.06,2.199999999982)); +#72888 = VECTOR('',#72889,1.); +#72889 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72890 = ORIENTED_EDGE('',*,*,#71922,.T.); +#72891 = ORIENTED_EDGE('',*,*,#71914,.T.); +#72892 = ORIENTED_EDGE('',*,*,#72590,.F.); +#72893 = ORIENTED_EDGE('',*,*,#72573,.F.); +#72894 = ORIENTED_EDGE('',*,*,#72565,.T.); +#72895 = ORIENTED_EDGE('',*,*,#72869,.F.); +#72896 = PLANE('',#72897); +#72897 = AXIS2_PLACEMENT_3D('',#72898,#72899,#72900); +#72898 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#72899 = DIRECTION('',(1.,0.,0.)); +#72900 = DIRECTION('',(0.,2.2E-16,-1.)); +#72901 = ADVANCED_FACE('',(#72902),#72913,.T.); +#72902 = FACE_BOUND('',#72903,.T.); +#72903 = EDGE_LOOP('',(#72904,#72905,#72906,#72907)); +#72904 = ORIENTED_EDGE('',*,*,#71494,.T.); +#72905 = ORIENTED_EDGE('',*,*,#72885,.T.); +#72906 = ORIENTED_EDGE('',*,*,#71930,.F.); +#72907 = ORIENTED_EDGE('',*,*,#72908,.F.); +#72908 = EDGE_CURVE('',#71485,#71931,#72909,.T.); +#72909 = LINE('',#72910,#72911); +#72910 = CARTESIAN_POINT('',(-0.1,-4.06,2.469999999982)); +#72911 = VECTOR('',#72912,1.); +#72912 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72913 = CYLINDRICAL_SURFACE('',#72914,0.27); +#72914 = AXIS2_PLACEMENT_3D('',#72915,#72916,#72917); +#72915 = CARTESIAN_POINT('',(-0.1,-4.06,2.199999999982)); +#72916 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72917 = DIRECTION('',(0.,-2.2E-16,1.)); +#72918 = ADVANCED_FACE('',(#72919),#72925,.T.); +#72919 = FACE_BOUND('',#72920,.T.); +#72920 = EDGE_LOOP('',(#72921,#72922,#72923,#72924)); +#72921 = ORIENTED_EDGE('',*,*,#71484,.F.); +#72922 = ORIENTED_EDGE('',*,*,#72908,.T.); +#72923 = ORIENTED_EDGE('',*,*,#71939,.T.); +#72924 = ORIENTED_EDGE('',*,*,#71864,.F.); +#72925 = PLANE('',#72926); +#72926 = AXIS2_PLACEMENT_3D('',#72927,#72928,#72929); +#72927 = CARTESIAN_POINT('',(-0.37,-4.06,2.469999999982)); +#72928 = DIRECTION('',(0.,-2.2E-16,1.)); +#72929 = DIRECTION('',(1.,0.,0.)); +#72930 = ADVANCED_FACE('',(#72931),#72943,.T.); +#72931 = FACE_BOUND('',#72932,.T.); +#72932 = EDGE_LOOP('',(#72933,#72934,#72935,#72942)); +#72933 = ORIENTED_EDGE('',*,*,#71606,.T.); +#72934 = ORIENTED_EDGE('',*,*,#71847,.F.); +#72935 = ORIENTED_EDGE('',*,*,#72936,.F.); +#72936 = EDGE_CURVE('',#71423,#71708,#72937,.T.); +#72937 = CIRCLE('',#72938,1.); +#72938 = AXIS2_PLACEMENT_3D('',#72939,#72940,#72941); +#72939 = CARTESIAN_POINT('',(-0.195,-3.93,2.15)); +#72940 = DIRECTION('',(0.,1.,3.5E-16)); +#72941 = DIRECTION('',(-1.,0.,0.)); +#72942 = ORIENTED_EDGE('',*,*,#71462,.T.); +#72943 = CONICAL_SURFACE('',#72944,1.,0.785398163397); +#72944 = AXIS2_PLACEMENT_3D('',#72945,#72946,#72947); +#72945 = CARTESIAN_POINT('',(-0.195,-3.93,2.15)); +#72946 = DIRECTION('',(0.,1.,3.5E-16)); +#72947 = DIRECTION('',(-1.,0.,0.)); +#72948 = ADVANCED_FACE('',(#72949),#72966,.T.); +#72949 = FACE_BOUND('',#72950,.T.); +#72950 = EDGE_LOOP('',(#72951,#72952,#72953,#72960)); +#72951 = ORIENTED_EDGE('',*,*,#71598,.T.); +#72952 = ORIENTED_EDGE('',*,*,#71453,.F.); +#72953 = ORIENTED_EDGE('',*,*,#72954,.F.); +#72954 = EDGE_CURVE('',#71007,#71431,#72955,.T.); +#72955 = CIRCLE('',#72956,1.); +#72956 = AXIS2_PLACEMENT_3D('',#72957,#72958,#72959); +#72957 = CARTESIAN_POINT('',(-0.195,-3.93,1.59)); +#72958 = DIRECTION('',(-7.601021176044E-48,1.,3.5E-16)); +#72959 = DIRECTION('',(-4.4E-16,3.5E-16,-1.)); +#72960 = ORIENTED_EDGE('',*,*,#72961,.T.); +#72961 = EDGE_CURVE('',#71007,#71591,#72962,.T.); +#72962 = LINE('',#72963,#72964); +#72963 = CARTESIAN_POINT('',(-0.195,-3.995,0.655)); +#72964 = VECTOR('',#72965,1.); +#72965 = DIRECTION('',(0.,-0.707106781187,0.707106781187)); +#72966 = CONICAL_SURFACE('',#72967,1.,0.785398163397); +#72967 = AXIS2_PLACEMENT_3D('',#72968,#72969,#72970); +#72968 = CARTESIAN_POINT('',(-0.195,-3.93,1.59)); +#72969 = DIRECTION('',(0.,1.,3.5E-16)); +#72970 = DIRECTION('',(-4.4E-16,3.5E-16,-1.)); +#72971 = ADVANCED_FACE('',(#72972),#72984,.T.); +#72972 = FACE_BOUND('',#72973,.T.); +#72973 = EDGE_LOOP('',(#72974,#72975,#72982,#72983)); +#72974 = ORIENTED_EDGE('',*,*,#71705,.F.); +#72975 = ORIENTED_EDGE('',*,*,#72976,.T.); +#72976 = EDGE_CURVE('',#71706,#71393,#72977,.T.); +#72977 = CIRCLE('',#72978,1.); +#72978 = AXIS2_PLACEMENT_3D('',#72979,#72980,#72981); +#72979 = CARTESIAN_POINT('',(-0.195,-2.26,2.15)); +#72980 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72981 = DIRECTION('',(0.,2.2E-16,-1.)); +#72982 = ORIENTED_EDGE('',*,*,#71422,.T.); +#72983 = ORIENTED_EDGE('',*,*,#72936,.T.); +#72984 = CYLINDRICAL_SURFACE('',#72985,1.); +#72985 = AXIS2_PLACEMENT_3D('',#72986,#72987,#72988); +#72986 = CARTESIAN_POINT('',(-0.195,-2.26,2.15)); +#72987 = DIRECTION('',(0.,-1.,-2.2E-16)); +#72988 = DIRECTION('',(0.,-2.2E-16,1.)); +#72989 = ADVANCED_FACE('',(#72990),#73000,.F.); +#72990 = FACE_BOUND('',#72991,.F.); +#72991 = EDGE_LOOP('',(#72992,#72999)); +#72992 = ORIENTED_EDGE('',*,*,#72993,.T.); +#72993 = EDGE_CURVE('',#71393,#71706,#72994,.T.); +#72994 = CIRCLE('',#72995,1.); +#72995 = AXIS2_PLACEMENT_3D('',#72996,#72997,#72998); +#72996 = CARTESIAN_POINT('',(-0.195,-2.26,2.15)); +#72997 = DIRECTION('',(0.,1.,0.)); +#72998 = DIRECTION('',(0.,0.,-1.)); +#72999 = ORIENTED_EDGE('',*,*,#72976,.T.); +#73000 = PLANE('',#73001); +#73001 = AXIS2_PLACEMENT_3D('',#73002,#73003,#73004); +#73002 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73003 = DIRECTION('',(0.,1.,0.)); +#73004 = DIRECTION('',(1.,0.,0.)); +#73005 = ADVANCED_FACE('',(#73006),#73020,.T.); +#73006 = FACE_BOUND('',#73007,.T.); +#73007 = EDGE_LOOP('',(#73008,#73009,#73010,#73011,#73012,#73013)); +#73008 = ORIENTED_EDGE('',*,*,#71392,.T.); +#73009 = ORIENTED_EDGE('',*,*,#72993,.T.); +#73010 = ORIENTED_EDGE('',*,*,#71746,.F.); +#73011 = ORIENTED_EDGE('',*,*,#71768,.F.); +#73012 = ORIENTED_EDGE('',*,*,#71810,.F.); +#73013 = ORIENTED_EDGE('',*,*,#73014,.F.); +#73014 = EDGE_CURVE('',#71385,#71801,#73015,.T.); +#73015 = CIRCLE('',#73016,1.); +#73016 = AXIS2_PLACEMENT_3D('',#73017,#73018,#73019); +#73017 = CARTESIAN_POINT('',(-0.195,0.56,2.15)); +#73018 = DIRECTION('',(0.,1.,0.)); +#73019 = DIRECTION('',(0.,0.,-1.)); +#73020 = CYLINDRICAL_SURFACE('',#73021,1.); +#73021 = AXIS2_PLACEMENT_3D('',#73022,#73023,#73024); +#73022 = CARTESIAN_POINT('',(-0.195,-0.44,2.15)); +#73023 = DIRECTION('',(0.,-1.,0.)); +#73024 = DIRECTION('',(-1.,0.,0.)); +#73025 = ADVANCED_FACE('',(#73026),#73051,.T.); +#73026 = FACE_BOUND('',#73027,.F.); +#73027 = EDGE_LOOP('',(#73028,#73036,#73037,#73045)); +#73028 = ORIENTED_EDGE('',*,*,#73029,.T.); +#73029 = EDGE_CURVE('',#73030,#71377,#73032,.T.); +#73030 = VERTEX_POINT('',#73031); +#73031 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73032 = LINE('',#73033,#73034); +#73033 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73034 = VECTOR('',#73035,1.); +#73035 = DIRECTION('',(1.,0.,0.)); +#73036 = ORIENTED_EDGE('',*,*,#71376,.T.); +#73037 = ORIENTED_EDGE('',*,*,#73038,.T.); +#73038 = EDGE_CURVE('',#71369,#73039,#73041,.T.); +#73039 = VERTEX_POINT('',#73040); +#73040 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73041 = LINE('',#73042,#73043); +#73042 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#73043 = VECTOR('',#73044,1.); +#73044 = DIRECTION('',(-1.,0.,0.)); +#73045 = ORIENTED_EDGE('',*,*,#73046,.T.); +#73046 = EDGE_CURVE('',#73039,#73030,#73047,.T.); +#73047 = LINE('',#73048,#73049); +#73048 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73049 = VECTOR('',#73050,1.); +#73050 = DIRECTION('',(0.,1.,2.2E-16)); +#73051 = PLANE('',#73052); +#73052 = AXIS2_PLACEMENT_3D('',#73053,#73054,#73055); +#73053 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.87)); +#73054 = DIRECTION('',(0.,-2.2E-16,1.)); +#73055 = DIRECTION('',(1.,0.,0.)); +#73056 = ADVANCED_FACE('',(#73057),#73082,.F.); +#73057 = FACE_BOUND('',#73058,.F.); +#73058 = EDGE_LOOP('',(#73059,#73067,#73075,#73081)); +#73059 = ORIENTED_EDGE('',*,*,#73060,.T.); +#73060 = EDGE_CURVE('',#73039,#73061,#73063,.T.); +#73061 = VERTEX_POINT('',#73062); +#73062 = CARTESIAN_POINT('',(-1.495,-0.63,1.285)); +#73063 = LINE('',#73064,#73065); +#73064 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73065 = VECTOR('',#73066,1.); +#73066 = DIRECTION('',(0.,0.,-1.)); +#73067 = ORIENTED_EDGE('',*,*,#73068,.T.); +#73068 = EDGE_CURVE('',#73061,#73069,#73071,.T.); +#73069 = VERTEX_POINT('',#73070); +#73070 = CARTESIAN_POINT('',(-1.495,0.56,1.285)); +#73071 = LINE('',#73072,#73073); +#73072 = CARTESIAN_POINT('',(-1.495,-0.63,1.285)); +#73073 = VECTOR('',#73074,1.); +#73074 = DIRECTION('',(0.,1.,2.2E-16)); +#73075 = ORIENTED_EDGE('',*,*,#73076,.F.); +#73076 = EDGE_CURVE('',#73030,#73069,#73077,.T.); +#73077 = LINE('',#73078,#73079); +#73078 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73079 = VECTOR('',#73080,1.); +#73080 = DIRECTION('',(0.,0.,-1.)); +#73081 = ORIENTED_EDGE('',*,*,#73046,.F.); +#73082 = PLANE('',#73083); +#73083 = AXIS2_PLACEMENT_3D('',#73084,#73085,#73086); +#73084 = CARTESIAN_POINT('',(-1.495,-0.63,1.87)); +#73085 = DIRECTION('',(1.,0.,0.)); +#73086 = DIRECTION('',(-0.,1.,0.)); +#73087 = ADVANCED_FACE('',(#73088),#73106,.F.); +#73088 = FACE_BOUND('',#73089,.F.); +#73089 = EDGE_LOOP('',(#73090,#73091,#73099,#73105)); +#73090 = ORIENTED_EDGE('',*,*,#73076,.T.); +#73091 = ORIENTED_EDGE('',*,*,#73092,.T.); +#73092 = EDGE_CURVE('',#73069,#73093,#73095,.T.); +#73093 = VERTEX_POINT('',#73094); +#73094 = CARTESIAN_POINT('',(-1.195,0.56,1.285)); +#73095 = LINE('',#73096,#73097); +#73096 = CARTESIAN_POINT('',(-1.495,0.56,1.285)); +#73097 = VECTOR('',#73098,1.); +#73098 = DIRECTION('',(1.,0.,0.)); +#73099 = ORIENTED_EDGE('',*,*,#73100,.T.); +#73100 = EDGE_CURVE('',#73093,#71377,#73101,.T.); +#73101 = LINE('',#73102,#73103); +#73102 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#73103 = VECTOR('',#73104,1.); +#73104 = DIRECTION('',(0.,0.,1.)); +#73105 = ORIENTED_EDGE('',*,*,#73029,.F.); +#73106 = PLANE('',#73107); +#73107 = AXIS2_PLACEMENT_3D('',#73108,#73109,#73110); +#73108 = CARTESIAN_POINT('',(-1.495,0.56,1.87)); +#73109 = DIRECTION('',(0.,-1.,0.)); +#73110 = DIRECTION('',(1.,0.,0.)); +#73111 = ADVANCED_FACE('',(#73112),#73123,.F.); +#73112 = FACE_BOUND('',#73113,.F.); +#73113 = EDGE_LOOP('',(#73114,#73115,#73121,#73122)); +#73114 = ORIENTED_EDGE('',*,*,#71368,.T.); +#73115 = ORIENTED_EDGE('',*,*,#73116,.T.); +#73116 = EDGE_CURVE('',#71361,#73061,#73117,.T.); +#73117 = LINE('',#73118,#73119); +#73118 = CARTESIAN_POINT('',(-1.195,-0.63,1.285)); +#73119 = VECTOR('',#73120,1.); +#73120 = DIRECTION('',(-1.,0.,0.)); +#73121 = ORIENTED_EDGE('',*,*,#73060,.F.); +#73122 = ORIENTED_EDGE('',*,*,#73038,.F.); +#73123 = PLANE('',#73124); +#73124 = AXIS2_PLACEMENT_3D('',#73125,#73126,#73127); +#73125 = CARTESIAN_POINT('',(-1.195,-0.63,1.87)); +#73126 = DIRECTION('',(0.,1.,0.)); +#73127 = DIRECTION('',(-1.,0.,0.)); +#73128 = ADVANCED_FACE('',(#73129),#73141,.F.); +#73129 = FACE_BOUND('',#73130,.T.); +#73130 = EDGE_LOOP('',(#73131,#73132,#73138,#73139,#73140)); +#73131 = ORIENTED_EDGE('',*,*,#73092,.T.); +#73132 = ORIENTED_EDGE('',*,*,#73133,.T.); +#73133 = EDGE_CURVE('',#73093,#71353,#73134,.T.); +#73134 = LINE('',#73135,#73136); +#73135 = CARTESIAN_POINT('',(-1.195,0.56,1.285)); +#73136 = VECTOR('',#73137,1.); +#73137 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73138 = ORIENTED_EDGE('',*,*,#71360,.T.); +#73139 = ORIENTED_EDGE('',*,*,#73116,.T.); +#73140 = ORIENTED_EDGE('',*,*,#73068,.T.); +#73141 = PLANE('',#73142); +#73142 = AXIS2_PLACEMENT_3D('',#73143,#73144,#73145); +#73143 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.285)); +#73144 = DIRECTION('',(0.,-2.2E-16,1.)); +#73145 = DIRECTION('',(1.,0.,0.)); +#73146 = ADVANCED_FACE('',(#73147),#73188,.F.); +#73147 = FACE_BOUND('',#73148,.F.); +#73148 = EDGE_LOOP('',(#73149,#73157,#73158,#73166,#73174,#73182)); +#73149 = ORIENTED_EDGE('',*,*,#73150,.T.); +#73150 = EDGE_CURVE('',#73151,#73093,#73153,.T.); +#73151 = VERTEX_POINT('',#73152); +#73152 = CARTESIAN_POINT('',(-0.195,0.56,1.285)); +#73153 = LINE('',#73154,#73155); +#73154 = CARTESIAN_POINT('',(-0.195,0.56,1.285)); +#73155 = VECTOR('',#73156,1.); +#73156 = DIRECTION('',(-1.,0.,0.)); +#73157 = ORIENTED_EDGE('',*,*,#73133,.T.); +#73158 = ORIENTED_EDGE('',*,*,#73159,.F.); +#73159 = EDGE_CURVE('',#73160,#71353,#73162,.T.); +#73160 = VERTEX_POINT('',#73161); +#73161 = CARTESIAN_POINT('',(-0.995,0.1,1.285)); +#73162 = LINE('',#73163,#73164); +#73163 = CARTESIAN_POINT('',(-0.995,0.1,1.285)); +#73164 = VECTOR('',#73165,1.); +#73165 = DIRECTION('',(-0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#73166 = ORIENTED_EDGE('',*,*,#73167,.F.); +#73167 = EDGE_CURVE('',#73168,#73160,#73170,.T.); +#73168 = VERTEX_POINT('',#73169); +#73169 = CARTESIAN_POINT('',(-0.295,0.1,1.285)); +#73170 = LINE('',#73171,#73172); +#73171 = CARTESIAN_POINT('',(-0.295,0.1,1.285)); +#73172 = VECTOR('',#73173,1.); +#73173 = DIRECTION('',(-1.,0.,0.)); +#73174 = ORIENTED_EDGE('',*,*,#73175,.F.); +#73175 = EDGE_CURVE('',#73176,#73168,#73178,.T.); +#73176 = VERTEX_POINT('',#73177); +#73177 = CARTESIAN_POINT('',(-0.195,0.2,1.285)); +#73178 = LINE('',#73179,#73180); +#73179 = CARTESIAN_POINT('',(-0.195,0.2,1.285)); +#73180 = VECTOR('',#73181,1.); +#73181 = DIRECTION('',(-0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#73182 = ORIENTED_EDGE('',*,*,#73183,.F.); +#73183 = EDGE_CURVE('',#73151,#73176,#73184,.T.); +#73184 = LINE('',#73185,#73186); +#73185 = CARTESIAN_POINT('',(-0.195,0.56,1.285)); +#73186 = VECTOR('',#73187,1.); +#73187 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73188 = PLANE('',#73189); +#73189 = AXIS2_PLACEMENT_3D('',#73190,#73191,#73192); +#73190 = CARTESIAN_POINT('',(-0.747316685586,0.29889766982,1.285)); +#73191 = DIRECTION('',(0.,-2.2E-16,1.)); +#73192 = DIRECTION('',(1.,0.,0.)); +#73193 = ADVANCED_FACE('',(#73194),#73219,.T.); +#73194 = FACE_BOUND('',#73195,.F.); +#73195 = EDGE_LOOP('',(#73196,#73206,#73212,#73213)); +#73196 = ORIENTED_EDGE('',*,*,#73197,.T.); +#73197 = EDGE_CURVE('',#73198,#73200,#73202,.T.); +#73198 = VERTEX_POINT('',#73199); +#73199 = CARTESIAN_POINT('',(-0.195,0.2,0.19)); +#73200 = VERTEX_POINT('',#73201); +#73201 = CARTESIAN_POINT('',(-0.195,0.56,0.19)); +#73202 = LINE('',#73203,#73204); +#73203 = CARTESIAN_POINT('',(-0.195,-0.145,0.19)); +#73204 = VECTOR('',#73205,1.); +#73205 = DIRECTION('',(0.,1.,0.)); +#73206 = ORIENTED_EDGE('',*,*,#73207,.T.); +#73207 = EDGE_CURVE('',#73200,#73151,#73208,.T.); +#73208 = LINE('',#73209,#73210); +#73209 = CARTESIAN_POINT('',(-0.195,0.56,-1.E-02)); +#73210 = VECTOR('',#73211,1.); +#73211 = DIRECTION('',(0.,0.,1.)); +#73212 = ORIENTED_EDGE('',*,*,#73183,.T.); +#73213 = ORIENTED_EDGE('',*,*,#73214,.F.); +#73214 = EDGE_CURVE('',#73198,#73176,#73215,.T.); +#73215 = LINE('',#73216,#73217); +#73216 = CARTESIAN_POINT('',(-0.195,0.2,-1.E-02)); +#73217 = VECTOR('',#73218,1.); +#73218 = DIRECTION('',(0.,0.,1.)); +#73219 = PLANE('',#73220); +#73220 = AXIS2_PLACEMENT_3D('',#73221,#73222,#73223); +#73221 = CARTESIAN_POINT('',(-0.195,0.56,-1.E-02)); +#73222 = DIRECTION('',(-1.,0.,0.)); +#73223 = DIRECTION('',(0.,1.,0.)); +#73224 = ADVANCED_FACE('',(#73225),#73243,.T.); +#73225 = FACE_BOUND('',#73226,.F.); +#73226 = EDGE_LOOP('',(#73227,#73235,#73236,#73237)); +#73227 = ORIENTED_EDGE('',*,*,#73228,.T.); +#73228 = EDGE_CURVE('',#73229,#73198,#73231,.T.); +#73229 = VERTEX_POINT('',#73230); +#73230 = CARTESIAN_POINT('',(-0.295,0.1,0.19)); +#73231 = LINE('',#73232,#73233); +#73232 = CARTESIAN_POINT('',(0.335,0.73,0.19)); +#73233 = VECTOR('',#73234,1.); +#73234 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73235 = ORIENTED_EDGE('',*,*,#73214,.T.); +#73236 = ORIENTED_EDGE('',*,*,#73175,.T.); +#73237 = ORIENTED_EDGE('',*,*,#73238,.F.); +#73238 = EDGE_CURVE('',#73229,#73168,#73239,.T.); +#73239 = LINE('',#73240,#73241); +#73240 = CARTESIAN_POINT('',(-0.295,0.1,-1.E-02)); +#73241 = VECTOR('',#73242,1.); +#73242 = DIRECTION('',(0.,0.,1.)); +#73243 = PLANE('',#73244); +#73244 = AXIS2_PLACEMENT_3D('',#73245,#73246,#73247); +#73245 = CARTESIAN_POINT('',(-0.195,0.2,-1.E-02)); +#73246 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#73247 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73248 = ADVANCED_FACE('',(#73249),#73267,.T.); +#73249 = FACE_BOUND('',#73250,.F.); +#73250 = EDGE_LOOP('',(#73251,#73259,#73260,#73261)); +#73251 = ORIENTED_EDGE('',*,*,#73252,.T.); +#73252 = EDGE_CURVE('',#73253,#73229,#73255,.T.); +#73253 = VERTEX_POINT('',#73254); +#73254 = CARTESIAN_POINT('',(-0.995,0.1,0.19)); +#73255 = LINE('',#73256,#73257); +#73256 = CARTESIAN_POINT('',(1.34,0.1,0.19)); +#73257 = VECTOR('',#73258,1.); +#73258 = DIRECTION('',(1.,0.,0.)); +#73259 = ORIENTED_EDGE('',*,*,#73238,.T.); +#73260 = ORIENTED_EDGE('',*,*,#73167,.T.); +#73261 = ORIENTED_EDGE('',*,*,#73262,.F.); +#73262 = EDGE_CURVE('',#73253,#73160,#73263,.T.); +#73263 = LINE('',#73264,#73265); +#73264 = CARTESIAN_POINT('',(-0.995,0.1,-1.E-02)); +#73265 = VECTOR('',#73266,1.); +#73266 = DIRECTION('',(0.,0.,1.)); +#73267 = PLANE('',#73268); +#73268 = AXIS2_PLACEMENT_3D('',#73269,#73270,#73271); +#73269 = CARTESIAN_POINT('',(-0.295,0.1,-1.E-02)); +#73270 = DIRECTION('',(0.,1.,0.)); +#73271 = DIRECTION('',(1.,0.,0.)); +#73272 = ADVANCED_FACE('',(#73273),#73284,.T.); +#73273 = FACE_BOUND('',#73274,.F.); +#73274 = EDGE_LOOP('',(#73275,#73281,#73282,#73283)); +#73275 = ORIENTED_EDGE('',*,*,#73276,.T.); +#73276 = EDGE_CURVE('',#71345,#73253,#73277,.T.); +#73277 = LINE('',#73278,#73279); +#73278 = CARTESIAN_POINT('',(-0.24,0.855,0.19)); +#73279 = VECTOR('',#73280,1.); +#73280 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73281 = ORIENTED_EDGE('',*,*,#73262,.T.); +#73282 = ORIENTED_EDGE('',*,*,#73159,.T.); +#73283 = ORIENTED_EDGE('',*,*,#71352,.F.); +#73284 = PLANE('',#73285); +#73285 = AXIS2_PLACEMENT_3D('',#73286,#73287,#73288); +#73286 = CARTESIAN_POINT('',(-0.995,0.1,-1.E-02)); +#73287 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#73288 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#73289 = ADVANCED_FACE('',(#73290),#73296,.T.); +#73290 = FACE_BOUND('',#73291,.T.); +#73291 = EDGE_LOOP('',(#73292,#73293,#73294,#73295)); +#73292 = ORIENTED_EDGE('',*,*,#71125,.F.); +#73293 = ORIENTED_EDGE('',*,*,#71205,.T.); +#73294 = ORIENTED_EDGE('',*,*,#71226,.T.); +#73295 = ORIENTED_EDGE('',*,*,#71265,.F.); +#73296 = PLANE('',#73297); +#73297 = AXIS2_PLACEMENT_3D('',#73298,#73299,#73300); +#73298 = CARTESIAN_POINT('',(-0.15,-2.26,0.19)); +#73299 = DIRECTION('',(0.,1.,0.)); +#73300 = DIRECTION('',(1.,0.,0.)); +#73301 = ADVANCED_FACE('',(#73302),#73320,.F.); +#73302 = FACE_BOUND('',#73303,.F.); +#73303 = EDGE_LOOP('',(#73304,#73312,#73313,#73314)); +#73304 = ORIENTED_EDGE('',*,*,#73305,.F.); +#73305 = EDGE_CURVE('',#71258,#73306,#73308,.T.); +#73306 = VERTEX_POINT('',#73307); +#73307 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73308 = LINE('',#73309,#73310); +#73309 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73310 = VECTOR('',#73311,1.); +#73311 = DIRECTION('',(1.,0.,0.)); +#73312 = ORIENTED_EDGE('',*,*,#71257,.T.); +#73313 = ORIENTED_EDGE('',*,*,#71117,.T.); +#73314 = ORIENTED_EDGE('',*,*,#73315,.F.); +#73315 = EDGE_CURVE('',#73306,#71110,#73316,.T.); +#73316 = LINE('',#73317,#73318); +#73317 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73318 = VECTOR('',#73319,1.); +#73319 = DIRECTION('',(0.,0.,1.)); +#73320 = PLANE('',#73321); +#73321 = AXIS2_PLACEMENT_3D('',#73322,#73323,#73324); +#73322 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73323 = DIRECTION('',(0.,1.,0.)); +#73324 = DIRECTION('',(1.,0.,0.)); +#73325 = ADVANCED_FACE('',(#73326),#73359,.T.); +#73326 = FACE_BOUND('',#73327,.T.); +#73327 = EDGE_LOOP('',(#73328,#73338,#73346,#73352,#73353)); +#73328 = ORIENTED_EDGE('',*,*,#73329,.T.); +#73329 = EDGE_CURVE('',#73330,#73332,#73334,.T.); +#73330 = VERTEX_POINT('',#73331); +#73331 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73332 = VERTEX_POINT('',#73333); +#73333 = CARTESIAN_POINT('',(0.7,-1.96,1.59)); +#73334 = LINE('',#73335,#73336); +#73335 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73336 = VECTOR('',#73337,1.); +#73337 = DIRECTION('',(0.,0.,1.)); +#73338 = ORIENTED_EDGE('',*,*,#73339,.T.); +#73339 = EDGE_CURVE('',#73332,#73340,#73342,.T.); +#73340 = VERTEX_POINT('',#73341); +#73341 = CARTESIAN_POINT('',(0.7,-2.26,1.59)); +#73342 = LINE('',#73343,#73344); +#73343 = CARTESIAN_POINT('',(0.7,-1.96,1.59)); +#73344 = VECTOR('',#73345,1.); +#73345 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73346 = ORIENTED_EDGE('',*,*,#73347,.F.); +#73347 = EDGE_CURVE('',#71110,#73340,#73348,.T.); +#73348 = LINE('',#73349,#73350); +#73349 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73350 = VECTOR('',#73351,1.); +#73351 = DIRECTION('',(0.,0.,1.)); +#73352 = ORIENTED_EDGE('',*,*,#73315,.F.); +#73353 = ORIENTED_EDGE('',*,*,#73354,.F.); +#73354 = EDGE_CURVE('',#73330,#73306,#73355,.T.); +#73355 = LINE('',#73356,#73357); +#73356 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73357 = VECTOR('',#73358,1.); +#73358 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73359 = PLANE('',#73360); +#73360 = AXIS2_PLACEMENT_3D('',#73361,#73362,#73363); +#73361 = CARTESIAN_POINT('',(0.7,-1.96,0.19)); +#73362 = DIRECTION('',(1.,0.,0.)); +#73363 = DIRECTION('',(0.,-1.,0.)); +#73364 = ADVANCED_FACE('',(#73365),#73390,.F.); +#73365 = FACE_BOUND('',#73366,.F.); +#73366 = EDGE_LOOP('',(#73367,#73375,#73383,#73389)); +#73367 = ORIENTED_EDGE('',*,*,#73368,.T.); +#73368 = EDGE_CURVE('',#73340,#73369,#73371,.T.); +#73369 = VERTEX_POINT('',#73370); +#73370 = CARTESIAN_POINT('',(1.,-2.26,1.59)); +#73371 = LINE('',#73372,#73373); +#73372 = CARTESIAN_POINT('',(0.7,-2.26,1.59)); +#73373 = VECTOR('',#73374,1.); +#73374 = DIRECTION('',(1.,0.,0.)); +#73375 = ORIENTED_EDGE('',*,*,#73376,.T.); +#73376 = EDGE_CURVE('',#73369,#73377,#73379,.T.); +#73377 = VERTEX_POINT('',#73378); +#73378 = CARTESIAN_POINT('',(1.,-1.96,1.59)); +#73379 = LINE('',#73380,#73381); +#73380 = CARTESIAN_POINT('',(1.,-2.26,1.59)); +#73381 = VECTOR('',#73382,1.); +#73382 = DIRECTION('',(0.,1.,2.2E-16)); +#73383 = ORIENTED_EDGE('',*,*,#73384,.T.); +#73384 = EDGE_CURVE('',#73377,#73332,#73385,.T.); +#73385 = LINE('',#73386,#73387); +#73386 = CARTESIAN_POINT('',(1.,-1.96,1.59)); +#73387 = VECTOR('',#73388,1.); +#73388 = DIRECTION('',(-1.,0.,0.)); +#73389 = ORIENTED_EDGE('',*,*,#73339,.T.); +#73390 = PLANE('',#73391); +#73391 = AXIS2_PLACEMENT_3D('',#73392,#73393,#73394); +#73392 = CARTESIAN_POINT('',(0.85,-2.11,1.59)); +#73393 = DIRECTION('',(0.,-2.2E-16,1.)); +#73394 = DIRECTION('',(1.,0.,0.)); +#73395 = ADVANCED_FACE('',(#73396),#73427,.T.); +#73396 = FACE_BOUND('',#73397,.T.); +#73397 = EDGE_LOOP('',(#73398,#73406,#73412,#73413,#73421)); +#73398 = ORIENTED_EDGE('',*,*,#73399,.T.); +#73399 = EDGE_CURVE('',#73400,#71102,#73402,.T.); +#73400 = VERTEX_POINT('',#73401); +#73401 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73402 = LINE('',#73403,#73404); +#73403 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73404 = VECTOR('',#73405,1.); +#73405 = DIRECTION('',(0.,0.,1.)); +#73406 = ORIENTED_EDGE('',*,*,#73407,.T.); +#73407 = EDGE_CURVE('',#71102,#73369,#73408,.T.); +#73408 = LINE('',#73409,#73410); +#73409 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73410 = VECTOR('',#73411,1.); +#73411 = DIRECTION('',(0.,0.,1.)); +#73412 = ORIENTED_EDGE('',*,*,#73376,.T.); +#73413 = ORIENTED_EDGE('',*,*,#73414,.F.); +#73414 = EDGE_CURVE('',#73415,#73377,#73417,.T.); +#73415 = VERTEX_POINT('',#73416); +#73416 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73417 = LINE('',#73418,#73419); +#73418 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73419 = VECTOR('',#73420,1.); +#73420 = DIRECTION('',(0.,0.,1.)); +#73421 = ORIENTED_EDGE('',*,*,#73422,.F.); +#73422 = EDGE_CURVE('',#73400,#73415,#73423,.T.); +#73423 = LINE('',#73424,#73425); +#73424 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73425 = VECTOR('',#73426,1.); +#73426 = DIRECTION('',(0.,1.,2.2E-16)); +#73427 = PLANE('',#73428); +#73428 = AXIS2_PLACEMENT_3D('',#73429,#73430,#73431); +#73429 = CARTESIAN_POINT('',(1.,-2.26,0.19)); +#73430 = DIRECTION('',(-1.,0.,0.)); +#73431 = DIRECTION('',(0.,1.,0.)); +#73432 = ADVANCED_FACE('',(#73433),#73444,.T.); +#73433 = FACE_BOUND('',#73434,.T.); +#73434 = EDGE_LOOP('',(#73435,#73436,#73437,#73438)); +#73435 = ORIENTED_EDGE('',*,*,#73414,.T.); +#73436 = ORIENTED_EDGE('',*,*,#73384,.T.); +#73437 = ORIENTED_EDGE('',*,*,#73329,.F.); +#73438 = ORIENTED_EDGE('',*,*,#73439,.F.); +#73439 = EDGE_CURVE('',#73415,#73330,#73440,.T.); +#73440 = LINE('',#73441,#73442); +#73441 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73442 = VECTOR('',#73443,1.); +#73443 = DIRECTION('',(-1.,0.,0.)); +#73444 = PLANE('',#73445); +#73445 = AXIS2_PLACEMENT_3D('',#73446,#73447,#73448); +#73446 = CARTESIAN_POINT('',(1.,-1.96,0.19)); +#73447 = DIRECTION('',(0.,-1.,0.)); +#73448 = DIRECTION('',(-1.,0.,0.)); +#73449 = ADVANCED_FACE('',(#73450),#73456,.T.); +#73450 = FACE_BOUND('',#73451,.T.); +#73451 = EDGE_LOOP('',(#73452,#73453,#73454,#73455)); +#73452 = ORIENTED_EDGE('',*,*,#71109,.F.); +#73453 = ORIENTED_EDGE('',*,*,#73347,.T.); +#73454 = ORIENTED_EDGE('',*,*,#73368,.T.); +#73455 = ORIENTED_EDGE('',*,*,#73407,.F.); +#73456 = PLANE('',#73457); +#73457 = AXIS2_PLACEMENT_3D('',#73458,#73459,#73460); +#73458 = CARTESIAN_POINT('',(0.7,-2.26,0.19)); +#73459 = DIRECTION('',(0.,1.,0.)); +#73460 = DIRECTION('',(1.,0.,0.)); +#73461 = ADVANCED_FACE('',(#73462),#73480,.F.); +#73462 = FACE_BOUND('',#73463,.F.); +#73463 = EDGE_LOOP('',(#73464,#73472,#73473,#73474)); +#73464 = ORIENTED_EDGE('',*,*,#73465,.F.); +#73465 = EDGE_CURVE('',#73400,#73466,#73468,.T.); +#73466 = VERTEX_POINT('',#73467); +#73467 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#73468 = LINE('',#73469,#73470); +#73469 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73470 = VECTOR('',#73471,1.); +#73471 = DIRECTION('',(1.,0.,0.)); +#73472 = ORIENTED_EDGE('',*,*,#73399,.T.); +#73473 = ORIENTED_EDGE('',*,*,#71101,.T.); +#73474 = ORIENTED_EDGE('',*,*,#73475,.F.); +#73475 = EDGE_CURVE('',#73466,#71094,#73476,.T.); +#73476 = LINE('',#73477,#73478); +#73477 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#73478 = VECTOR('',#73479,1.); +#73479 = DIRECTION('',(0.,0.,1.)); +#73480 = PLANE('',#73481); +#73481 = AXIS2_PLACEMENT_3D('',#73482,#73483,#73484); +#73482 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#73483 = DIRECTION('',(0.,1.,0.)); +#73484 = DIRECTION('',(1.,0.,0.)); +#73485 = ADVANCED_FACE('',(#73486),#73519,.T.); +#73486 = FACE_BOUND('',#73487,.T.); +#73487 = EDGE_LOOP('',(#73488,#73498,#73506,#73512,#73513)); +#73488 = ORIENTED_EDGE('',*,*,#73489,.T.); +#73489 = EDGE_CURVE('',#73490,#73492,#73494,.T.); +#73490 = VERTEX_POINT('',#73491); +#73491 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73492 = VERTEX_POINT('',#73493); +#73493 = CARTESIAN_POINT('',(1.55,-1.96,1.59)); +#73494 = LINE('',#73495,#73496); +#73495 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73496 = VECTOR('',#73497,1.); +#73497 = DIRECTION('',(0.,0.,1.)); +#73498 = ORIENTED_EDGE('',*,*,#73499,.T.); +#73499 = EDGE_CURVE('',#73492,#73500,#73502,.T.); +#73500 = VERTEX_POINT('',#73501); +#73501 = CARTESIAN_POINT('',(1.55,-2.26,1.59)); +#73502 = LINE('',#73503,#73504); +#73503 = CARTESIAN_POINT('',(1.55,-1.96,1.59)); +#73504 = VECTOR('',#73505,1.); +#73505 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73506 = ORIENTED_EDGE('',*,*,#73507,.F.); +#73507 = EDGE_CURVE('',#71094,#73500,#73508,.T.); +#73508 = LINE('',#73509,#73510); +#73509 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#73510 = VECTOR('',#73511,1.); +#73511 = DIRECTION('',(0.,0.,1.)); +#73512 = ORIENTED_EDGE('',*,*,#73475,.F.); +#73513 = ORIENTED_EDGE('',*,*,#73514,.F.); +#73514 = EDGE_CURVE('',#73490,#73466,#73515,.T.); +#73515 = LINE('',#73516,#73517); +#73516 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73517 = VECTOR('',#73518,1.); +#73518 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73519 = PLANE('',#73520); +#73520 = AXIS2_PLACEMENT_3D('',#73521,#73522,#73523); +#73521 = CARTESIAN_POINT('',(1.55,-1.96,0.19)); +#73522 = DIRECTION('',(1.,0.,0.)); +#73523 = DIRECTION('',(0.,-1.,0.)); +#73524 = ADVANCED_FACE('',(#73525),#73550,.F.); +#73525 = FACE_BOUND('',#73526,.F.); +#73526 = EDGE_LOOP('',(#73527,#73535,#73543,#73549)); +#73527 = ORIENTED_EDGE('',*,*,#73528,.T.); +#73528 = EDGE_CURVE('',#73500,#73529,#73531,.T.); +#73529 = VERTEX_POINT('',#73530); +#73530 = CARTESIAN_POINT('',(1.85,-2.26,1.59)); +#73531 = LINE('',#73532,#73533); +#73532 = CARTESIAN_POINT('',(1.55,-2.26,1.59)); +#73533 = VECTOR('',#73534,1.); +#73534 = DIRECTION('',(1.,0.,0.)); +#73535 = ORIENTED_EDGE('',*,*,#73536,.T.); +#73536 = EDGE_CURVE('',#73529,#73537,#73539,.T.); +#73537 = VERTEX_POINT('',#73538); +#73538 = CARTESIAN_POINT('',(1.85,-1.96,1.59)); +#73539 = LINE('',#73540,#73541); +#73540 = CARTESIAN_POINT('',(1.85,-2.26,1.59)); +#73541 = VECTOR('',#73542,1.); +#73542 = DIRECTION('',(0.,1.,2.2E-16)); +#73543 = ORIENTED_EDGE('',*,*,#73544,.T.); +#73544 = EDGE_CURVE('',#73537,#73492,#73545,.T.); +#73545 = LINE('',#73546,#73547); +#73546 = CARTESIAN_POINT('',(1.85,-1.96,1.59)); +#73547 = VECTOR('',#73548,1.); +#73548 = DIRECTION('',(-1.,0.,0.)); +#73549 = ORIENTED_EDGE('',*,*,#73499,.T.); +#73550 = PLANE('',#73551); +#73551 = AXIS2_PLACEMENT_3D('',#73552,#73553,#73554); +#73552 = CARTESIAN_POINT('',(1.7,-2.11,1.59)); +#73553 = DIRECTION('',(0.,-2.2E-16,1.)); +#73554 = DIRECTION('',(1.,0.,0.)); +#73555 = ADVANCED_FACE('',(#73556),#73597,.T.); +#73556 = FACE_BOUND('',#73557,.T.); +#73557 = EDGE_LOOP('',(#73558,#73568,#73576,#73582,#73583,#73591)); +#73558 = ORIENTED_EDGE('',*,*,#73559,.T.); +#73559 = EDGE_CURVE('',#73560,#73562,#73564,.T.); +#73560 = VERTEX_POINT('',#73561); +#73561 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73562 = VERTEX_POINT('',#73563); +#73563 = CARTESIAN_POINT('',(1.85,-2.26,0.59)); +#73564 = LINE('',#73565,#73566); +#73565 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73566 = VECTOR('',#73567,1.); +#73567 = DIRECTION('',(0.,0.,1.)); +#73568 = ORIENTED_EDGE('',*,*,#73569,.T.); +#73569 = EDGE_CURVE('',#73562,#73570,#73572,.T.); +#73570 = VERTEX_POINT('',#73571); +#73571 = CARTESIAN_POINT('',(1.85,-2.26,0.765)); +#73572 = LINE('',#73573,#73574); +#73573 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73574 = VECTOR('',#73575,1.); +#73575 = DIRECTION('',(0.,0.,1.)); +#73576 = ORIENTED_EDGE('',*,*,#73577,.T.); +#73577 = EDGE_CURVE('',#73570,#73529,#73578,.T.); +#73578 = LINE('',#73579,#73580); +#73579 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73580 = VECTOR('',#73581,1.); +#73581 = DIRECTION('',(0.,0.,1.)); +#73582 = ORIENTED_EDGE('',*,*,#73536,.T.); +#73583 = ORIENTED_EDGE('',*,*,#73584,.F.); +#73584 = EDGE_CURVE('',#73585,#73537,#73587,.T.); +#73585 = VERTEX_POINT('',#73586); +#73586 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#73587 = LINE('',#73588,#73589); +#73588 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#73589 = VECTOR('',#73590,1.); +#73590 = DIRECTION('',(0.,0.,1.)); +#73591 = ORIENTED_EDGE('',*,*,#73592,.F.); +#73592 = EDGE_CURVE('',#73560,#73585,#73593,.T.); +#73593 = LINE('',#73594,#73595); +#73594 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73595 = VECTOR('',#73596,1.); +#73596 = DIRECTION('',(0.,1.,2.2E-16)); +#73597 = PLANE('',#73598); +#73598 = AXIS2_PLACEMENT_3D('',#73599,#73600,#73601); +#73599 = CARTESIAN_POINT('',(1.85,-2.26,0.19)); +#73600 = DIRECTION('',(-1.,0.,0.)); +#73601 = DIRECTION('',(0.,1.,0.)); +#73602 = ADVANCED_FACE('',(#73603),#73636,.F.); +#73603 = FACE_BOUND('',#73604,.F.); +#73604 = EDGE_LOOP('',(#73605,#73613,#73614,#73622,#73630)); +#73605 = ORIENTED_EDGE('',*,*,#73606,.F.); +#73606 = EDGE_CURVE('',#73562,#73607,#73609,.T.); +#73607 = VERTEX_POINT('',#73608); +#73608 = CARTESIAN_POINT('',(2.4,-2.26,0.59)); +#73609 = LINE('',#73610,#73611); +#73610 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#73611 = VECTOR('',#73612,1.); +#73612 = DIRECTION('',(1.,0.,0.)); +#73613 = ORIENTED_EDGE('',*,*,#73569,.T.); +#73614 = ORIENTED_EDGE('',*,*,#73615,.F.); +#73615 = EDGE_CURVE('',#73616,#73570,#73618,.T.); +#73616 = VERTEX_POINT('',#73617); +#73617 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73618 = LINE('',#73619,#73620); +#73619 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73620 = VECTOR('',#73621,1.); +#73621 = DIRECTION('',(-0.707106781187,1.599999999999E-16, + -0.707106781187)); +#73622 = ORIENTED_EDGE('',*,*,#73623,.T.); +#73623 = EDGE_CURVE('',#73616,#73624,#73626,.T.); +#73624 = VERTEX_POINT('',#73625); +#73625 = CARTESIAN_POINT('',(2.4,-2.26,1.19)); +#73626 = LINE('',#73627,#73628); +#73627 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73628 = VECTOR('',#73629,1.); +#73629 = DIRECTION('',(1.,0.,0.)); +#73630 = ORIENTED_EDGE('',*,*,#73631,.F.); +#73631 = EDGE_CURVE('',#73607,#73624,#73632,.T.); +#73632 = LINE('',#73633,#73634); +#73633 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73634 = VECTOR('',#73635,1.); +#73635 = DIRECTION('',(0.,0.,1.)); +#73636 = PLANE('',#73637); +#73637 = AXIS2_PLACEMENT_3D('',#73638,#73639,#73640); +#73638 = CARTESIAN_POINT('',(2.975,-2.26,0.826809470956)); +#73639 = DIRECTION('',(0.,1.,2.2E-16)); +#73640 = DIRECTION('',(0.,-2.2E-16,1.)); +#73641 = ADVANCED_FACE('',(#73642),#73683,.T.); +#73642 = FACE_BOUND('',#73643,.T.); +#73643 = EDGE_LOOP('',(#73644,#73654,#73662,#73668,#73669,#73677)); +#73644 = ORIENTED_EDGE('',*,*,#73645,.T.); +#73645 = EDGE_CURVE('',#73646,#73648,#73650,.T.); +#73646 = VERTEX_POINT('',#73647); +#73647 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73648 = VERTEX_POINT('',#73649); +#73649 = CARTESIAN_POINT('',(2.4,-1.96,1.59)); +#73650 = LINE('',#73651,#73652); +#73651 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73652 = VECTOR('',#73653,1.); +#73653 = DIRECTION('',(0.,0.,1.)); +#73654 = ORIENTED_EDGE('',*,*,#73655,.T.); +#73655 = EDGE_CURVE('',#73648,#73656,#73658,.T.); +#73656 = VERTEX_POINT('',#73657); +#73657 = CARTESIAN_POINT('',(2.4,-2.26,1.59)); +#73658 = LINE('',#73659,#73660); +#73659 = CARTESIAN_POINT('',(2.4,-1.96,1.59)); +#73660 = VECTOR('',#73661,1.); +#73661 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73662 = ORIENTED_EDGE('',*,*,#73663,.F.); +#73663 = EDGE_CURVE('',#73624,#73656,#73664,.T.); +#73664 = LINE('',#73665,#73666); +#73665 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73666 = VECTOR('',#73667,1.); +#73667 = DIRECTION('',(0.,0.,1.)); +#73668 = ORIENTED_EDGE('',*,*,#73631,.F.); +#73669 = ORIENTED_EDGE('',*,*,#73670,.F.); +#73670 = EDGE_CURVE('',#73671,#73607,#73673,.T.); +#73671 = VERTEX_POINT('',#73672); +#73672 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73673 = LINE('',#73674,#73675); +#73674 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73675 = VECTOR('',#73676,1.); +#73676 = DIRECTION('',(0.,0.,1.)); +#73677 = ORIENTED_EDGE('',*,*,#73678,.F.); +#73678 = EDGE_CURVE('',#73646,#73671,#73679,.T.); +#73679 = LINE('',#73680,#73681); +#73680 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73681 = VECTOR('',#73682,1.); +#73682 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73683 = PLANE('',#73684); +#73684 = AXIS2_PLACEMENT_3D('',#73685,#73686,#73687); +#73685 = CARTESIAN_POINT('',(2.4,-1.96,0.19)); +#73686 = DIRECTION('',(1.,0.,0.)); +#73687 = DIRECTION('',(0.,-1.,0.)); +#73688 = ADVANCED_FACE('',(#73689),#73714,.T.); +#73689 = FACE_BOUND('',#73690,.T.); +#73690 = EDGE_LOOP('',(#73691,#73699,#73700,#73708)); +#73691 = ORIENTED_EDGE('',*,*,#73692,.F.); +#73692 = EDGE_CURVE('',#73624,#73693,#73695,.T.); +#73693 = VERTEX_POINT('',#73694); +#73694 = CARTESIAN_POINT('',(2.7,-2.26,1.19)); +#73695 = LINE('',#73696,#73697); +#73696 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73697 = VECTOR('',#73698,1.); +#73698 = DIRECTION('',(1.,0.,0.)); +#73699 = ORIENTED_EDGE('',*,*,#73663,.T.); +#73700 = ORIENTED_EDGE('',*,*,#73701,.T.); +#73701 = EDGE_CURVE('',#73656,#73702,#73704,.T.); +#73702 = VERTEX_POINT('',#73703); +#73703 = CARTESIAN_POINT('',(2.7,-2.26,1.59)); +#73704 = LINE('',#73705,#73706); +#73705 = CARTESIAN_POINT('',(2.4,-2.26,1.59)); +#73706 = VECTOR('',#73707,1.); +#73707 = DIRECTION('',(1.,0.,0.)); +#73708 = ORIENTED_EDGE('',*,*,#73709,.F.); +#73709 = EDGE_CURVE('',#73693,#73702,#73710,.T.); +#73710 = LINE('',#73711,#73712); +#73711 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73712 = VECTOR('',#73713,1.); +#73713 = DIRECTION('',(0.,0.,1.)); +#73714 = PLANE('',#73715); +#73715 = AXIS2_PLACEMENT_3D('',#73716,#73717,#73718); +#73716 = CARTESIAN_POINT('',(2.4,-2.26,0.19)); +#73717 = DIRECTION('',(0.,1.,0.)); +#73718 = DIRECTION('',(1.,0.,0.)); +#73719 = ADVANCED_FACE('',(#73720),#73761,.T.); +#73720 = FACE_BOUND('',#73721,.T.); +#73721 = EDGE_LOOP('',(#73722,#73732,#73738,#73739,#73747,#73755)); +#73722 = ORIENTED_EDGE('',*,*,#73723,.T.); +#73723 = EDGE_CURVE('',#73724,#73726,#73728,.T.); +#73724 = VERTEX_POINT('',#73725); +#73725 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73726 = VERTEX_POINT('',#73727); +#73727 = CARTESIAN_POINT('',(2.7,-2.26,0.59)); +#73728 = LINE('',#73729,#73730); +#73729 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73730 = VECTOR('',#73731,1.); +#73731 = DIRECTION('',(0.,0.,1.)); +#73732 = ORIENTED_EDGE('',*,*,#73733,.T.); +#73733 = EDGE_CURVE('',#73726,#73693,#73734,.T.); +#73734 = LINE('',#73735,#73736); +#73735 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73736 = VECTOR('',#73737,1.); +#73737 = DIRECTION('',(0.,0.,1.)); +#73738 = ORIENTED_EDGE('',*,*,#73709,.T.); +#73739 = ORIENTED_EDGE('',*,*,#73740,.T.); +#73740 = EDGE_CURVE('',#73702,#73741,#73743,.T.); +#73741 = VERTEX_POINT('',#73742); +#73742 = CARTESIAN_POINT('',(2.7,-1.96,1.59)); +#73743 = LINE('',#73744,#73745); +#73744 = CARTESIAN_POINT('',(2.7,-2.26,1.59)); +#73745 = VECTOR('',#73746,1.); +#73746 = DIRECTION('',(0.,1.,2.2E-16)); +#73747 = ORIENTED_EDGE('',*,*,#73748,.F.); +#73748 = EDGE_CURVE('',#73749,#73741,#73751,.T.); +#73749 = VERTEX_POINT('',#73750); +#73750 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#73751 = LINE('',#73752,#73753); +#73752 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#73753 = VECTOR('',#73754,1.); +#73754 = DIRECTION('',(0.,0.,1.)); +#73755 = ORIENTED_EDGE('',*,*,#73756,.F.); +#73756 = EDGE_CURVE('',#73724,#73749,#73757,.T.); +#73757 = LINE('',#73758,#73759); +#73758 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73759 = VECTOR('',#73760,1.); +#73760 = DIRECTION('',(0.,1.,2.2E-16)); +#73761 = PLANE('',#73762); +#73762 = AXIS2_PLACEMENT_3D('',#73763,#73764,#73765); +#73763 = CARTESIAN_POINT('',(2.7,-2.26,0.19)); +#73764 = DIRECTION('',(-1.,0.,0.)); +#73765 = DIRECTION('',(0.,1.,0.)); +#73766 = ADVANCED_FACE('',(#73767),#73792,.F.); +#73767 = FACE_BOUND('',#73768,.F.); +#73768 = EDGE_LOOP('',(#73769,#73777,#73778,#73786)); +#73769 = ORIENTED_EDGE('',*,*,#73770,.F.); +#73770 = EDGE_CURVE('',#73726,#73771,#73773,.T.); +#73771 = VERTEX_POINT('',#73772); +#73772 = CARTESIAN_POINT('',(3.25,-2.26,0.59)); +#73773 = LINE('',#73774,#73775); +#73774 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#73775 = VECTOR('',#73776,1.); +#73776 = DIRECTION('',(1.,0.,0.)); +#73777 = ORIENTED_EDGE('',*,*,#73733,.T.); +#73778 = ORIENTED_EDGE('',*,*,#73779,.T.); +#73779 = EDGE_CURVE('',#73693,#73780,#73782,.T.); +#73780 = VERTEX_POINT('',#73781); +#73781 = CARTESIAN_POINT('',(3.25,-2.26,1.19)); +#73782 = LINE('',#73783,#73784); +#73783 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73784 = VECTOR('',#73785,1.); +#73785 = DIRECTION('',(1.,0.,0.)); +#73786 = ORIENTED_EDGE('',*,*,#73787,.F.); +#73787 = EDGE_CURVE('',#73771,#73780,#73788,.T.); +#73788 = LINE('',#73789,#73790); +#73789 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73790 = VECTOR('',#73791,1.); +#73791 = DIRECTION('',(0.,0.,1.)); +#73792 = PLANE('',#73793); +#73793 = AXIS2_PLACEMENT_3D('',#73794,#73795,#73796); +#73794 = CARTESIAN_POINT('',(2.975,-2.26,0.826809470956)); +#73795 = DIRECTION('',(0.,1.,2.2E-16)); +#73796 = DIRECTION('',(0.,-2.2E-16,1.)); +#73797 = ADVANCED_FACE('',(#73798),#73839,.T.); +#73798 = FACE_BOUND('',#73799,.T.); +#73799 = EDGE_LOOP('',(#73800,#73810,#73818,#73824,#73825,#73833)); +#73800 = ORIENTED_EDGE('',*,*,#73801,.T.); +#73801 = EDGE_CURVE('',#73802,#73804,#73806,.T.); +#73802 = VERTEX_POINT('',#73803); +#73803 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73804 = VERTEX_POINT('',#73805); +#73805 = CARTESIAN_POINT('',(3.25,-1.96,1.59)); +#73806 = LINE('',#73807,#73808); +#73807 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73808 = VECTOR('',#73809,1.); +#73809 = DIRECTION('',(0.,0.,1.)); +#73810 = ORIENTED_EDGE('',*,*,#73811,.T.); +#73811 = EDGE_CURVE('',#73804,#73812,#73814,.T.); +#73812 = VERTEX_POINT('',#73813); +#73813 = CARTESIAN_POINT('',(3.25,-2.26,1.59)); +#73814 = LINE('',#73815,#73816); +#73815 = CARTESIAN_POINT('',(3.25,-1.96,1.59)); +#73816 = VECTOR('',#73817,1.); +#73817 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73818 = ORIENTED_EDGE('',*,*,#73819,.F.); +#73819 = EDGE_CURVE('',#73780,#73812,#73820,.T.); +#73820 = LINE('',#73821,#73822); +#73821 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73822 = VECTOR('',#73823,1.); +#73823 = DIRECTION('',(0.,0.,1.)); +#73824 = ORIENTED_EDGE('',*,*,#73787,.F.); +#73825 = ORIENTED_EDGE('',*,*,#73826,.F.); +#73826 = EDGE_CURVE('',#73827,#73771,#73829,.T.); +#73827 = VERTEX_POINT('',#73828); +#73828 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73829 = LINE('',#73830,#73831); +#73830 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73831 = VECTOR('',#73832,1.); +#73832 = DIRECTION('',(0.,0.,1.)); +#73833 = ORIENTED_EDGE('',*,*,#73834,.F.); +#73834 = EDGE_CURVE('',#73802,#73827,#73835,.T.); +#73835 = LINE('',#73836,#73837); +#73836 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73837 = VECTOR('',#73838,1.); +#73838 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73839 = PLANE('',#73840); +#73840 = AXIS2_PLACEMENT_3D('',#73841,#73842,#73843); +#73841 = CARTESIAN_POINT('',(3.25,-1.96,0.19)); +#73842 = DIRECTION('',(1.,0.,0.)); +#73843 = DIRECTION('',(0.,-1.,0.)); +#73844 = ADVANCED_FACE('',(#73845),#73870,.T.); +#73845 = FACE_BOUND('',#73846,.T.); +#73846 = EDGE_LOOP('',(#73847,#73855,#73856,#73864)); +#73847 = ORIENTED_EDGE('',*,*,#73848,.F.); +#73848 = EDGE_CURVE('',#73780,#73849,#73851,.T.); +#73849 = VERTEX_POINT('',#73850); +#73850 = CARTESIAN_POINT('',(3.55,-2.26,1.19)); +#73851 = LINE('',#73852,#73853); +#73852 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73853 = VECTOR('',#73854,1.); +#73854 = DIRECTION('',(1.,0.,0.)); +#73855 = ORIENTED_EDGE('',*,*,#73819,.T.); +#73856 = ORIENTED_EDGE('',*,*,#73857,.T.); +#73857 = EDGE_CURVE('',#73812,#73858,#73860,.T.); +#73858 = VERTEX_POINT('',#73859); +#73859 = CARTESIAN_POINT('',(3.55,-2.26,1.59)); +#73860 = LINE('',#73861,#73862); +#73861 = CARTESIAN_POINT('',(3.25,-2.26,1.59)); +#73862 = VECTOR('',#73863,1.); +#73863 = DIRECTION('',(1.,0.,0.)); +#73864 = ORIENTED_EDGE('',*,*,#73865,.F.); +#73865 = EDGE_CURVE('',#73849,#73858,#73866,.T.); +#73866 = LINE('',#73867,#73868); +#73867 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73868 = VECTOR('',#73869,1.); +#73869 = DIRECTION('',(0.,0.,1.)); +#73870 = PLANE('',#73871); +#73871 = AXIS2_PLACEMENT_3D('',#73872,#73873,#73874); +#73872 = CARTESIAN_POINT('',(3.25,-2.26,0.19)); +#73873 = DIRECTION('',(0.,1.,0.)); +#73874 = DIRECTION('',(1.,0.,0.)); +#73875 = ADVANCED_FACE('',(#73876),#73917,.T.); +#73876 = FACE_BOUND('',#73877,.T.); +#73877 = EDGE_LOOP('',(#73878,#73888,#73894,#73895,#73903,#73911)); +#73878 = ORIENTED_EDGE('',*,*,#73879,.T.); +#73879 = EDGE_CURVE('',#73880,#73882,#73884,.T.); +#73880 = VERTEX_POINT('',#73881); +#73881 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73882 = VERTEX_POINT('',#73883); +#73883 = CARTESIAN_POINT('',(3.55,-2.26,0.59)); +#73884 = LINE('',#73885,#73886); +#73885 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73886 = VECTOR('',#73887,1.); +#73887 = DIRECTION('',(0.,0.,1.)); +#73888 = ORIENTED_EDGE('',*,*,#73889,.T.); +#73889 = EDGE_CURVE('',#73882,#73849,#73890,.T.); +#73890 = LINE('',#73891,#73892); +#73891 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73892 = VECTOR('',#73893,1.); +#73893 = DIRECTION('',(0.,0.,1.)); +#73894 = ORIENTED_EDGE('',*,*,#73865,.T.); +#73895 = ORIENTED_EDGE('',*,*,#73896,.T.); +#73896 = EDGE_CURVE('',#73858,#73897,#73899,.T.); +#73897 = VERTEX_POINT('',#73898); +#73898 = CARTESIAN_POINT('',(3.55,-1.96,1.59)); +#73899 = LINE('',#73900,#73901); +#73900 = CARTESIAN_POINT('',(3.55,-2.26,1.59)); +#73901 = VECTOR('',#73902,1.); +#73902 = DIRECTION('',(0.,1.,2.2E-16)); +#73903 = ORIENTED_EDGE('',*,*,#73904,.F.); +#73904 = EDGE_CURVE('',#73905,#73897,#73907,.T.); +#73905 = VERTEX_POINT('',#73906); +#73906 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#73907 = LINE('',#73908,#73909); +#73908 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#73909 = VECTOR('',#73910,1.); +#73910 = DIRECTION('',(0.,0.,1.)); +#73911 = ORIENTED_EDGE('',*,*,#73912,.F.); +#73912 = EDGE_CURVE('',#73880,#73905,#73913,.T.); +#73913 = LINE('',#73914,#73915); +#73914 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73915 = VECTOR('',#73916,1.); +#73916 = DIRECTION('',(0.,1.,2.2E-16)); +#73917 = PLANE('',#73918); +#73918 = AXIS2_PLACEMENT_3D('',#73919,#73920,#73921); +#73919 = CARTESIAN_POINT('',(3.55,-2.26,0.19)); +#73920 = DIRECTION('',(-1.,0.,0.)); +#73921 = DIRECTION('',(0.,1.,0.)); +#73922 = ADVANCED_FACE('',(#73923),#73956,.F.); +#73923 = FACE_BOUND('',#73924,.F.); +#73924 = EDGE_LOOP('',(#73925,#73933,#73934,#73942,#73950)); +#73925 = ORIENTED_EDGE('',*,*,#73926,.F.); +#73926 = EDGE_CURVE('',#73882,#73927,#73929,.T.); +#73927 = VERTEX_POINT('',#73928); +#73928 = CARTESIAN_POINT('',(4.1,-2.26,0.59)); +#73929 = LINE('',#73930,#73931); +#73930 = CARTESIAN_POINT('',(-1.195,-2.26,0.59)); +#73931 = VECTOR('',#73932,1.); +#73932 = DIRECTION('',(1.,0.,0.)); +#73933 = ORIENTED_EDGE('',*,*,#73889,.T.); +#73934 = ORIENTED_EDGE('',*,*,#73935,.T.); +#73935 = EDGE_CURVE('',#73849,#73936,#73938,.T.); +#73936 = VERTEX_POINT('',#73937); +#73937 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#73938 = LINE('',#73939,#73940); +#73939 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#73940 = VECTOR('',#73941,1.); +#73941 = DIRECTION('',(1.,0.,0.)); +#73942 = ORIENTED_EDGE('',*,*,#73943,.T.); +#73943 = EDGE_CURVE('',#73936,#73944,#73946,.T.); +#73944 = VERTEX_POINT('',#73945); +#73945 = CARTESIAN_POINT('',(4.1,-2.26,0.765)); +#73946 = LINE('',#73947,#73948); +#73947 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#73948 = VECTOR('',#73949,1.); +#73949 = DIRECTION('',(0.707106781187,1.599999999999E-16,-0.707106781187 + )); +#73950 = ORIENTED_EDGE('',*,*,#73951,.F.); +#73951 = EDGE_CURVE('',#73927,#73944,#73952,.T.); +#73952 = LINE('',#73953,#73954); +#73953 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73954 = VECTOR('',#73955,1.); +#73955 = DIRECTION('',(0.,0.,1.)); +#73956 = PLANE('',#73957); +#73957 = AXIS2_PLACEMENT_3D('',#73958,#73959,#73960); +#73958 = CARTESIAN_POINT('',(2.975,-2.26,0.826809470956)); +#73959 = DIRECTION('',(0.,1.,2.2E-16)); +#73960 = DIRECTION('',(0.,-2.2E-16,1.)); +#73961 = ADVANCED_FACE('',(#73962),#74003,.T.); +#73962 = FACE_BOUND('',#73963,.T.); +#73963 = EDGE_LOOP('',(#73964,#73974,#73982,#73988,#73989,#73997)); +#73964 = ORIENTED_EDGE('',*,*,#73965,.T.); +#73965 = EDGE_CURVE('',#73966,#73968,#73970,.T.); +#73966 = VERTEX_POINT('',#73967); +#73967 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#73968 = VERTEX_POINT('',#73969); +#73969 = CARTESIAN_POINT('',(4.1,-1.96,1.59)); +#73970 = LINE('',#73971,#73972); +#73971 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#73972 = VECTOR('',#73973,1.); +#73973 = DIRECTION('',(0.,0.,1.)); +#73974 = ORIENTED_EDGE('',*,*,#73975,.T.); +#73975 = EDGE_CURVE('',#73968,#73976,#73978,.T.); +#73976 = VERTEX_POINT('',#73977); +#73977 = CARTESIAN_POINT('',(4.1,-2.26,1.59)); +#73978 = LINE('',#73979,#73980); +#73979 = CARTESIAN_POINT('',(4.1,-1.96,1.59)); +#73980 = VECTOR('',#73981,1.); +#73981 = DIRECTION('',(0.,-1.,-2.2E-16)); +#73982 = ORIENTED_EDGE('',*,*,#73983,.F.); +#73983 = EDGE_CURVE('',#73944,#73976,#73984,.T.); +#73984 = LINE('',#73985,#73986); +#73985 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73986 = VECTOR('',#73987,1.); +#73987 = DIRECTION('',(0.,0.,1.)); +#73988 = ORIENTED_EDGE('',*,*,#73951,.F.); +#73989 = ORIENTED_EDGE('',*,*,#73990,.F.); +#73990 = EDGE_CURVE('',#73991,#73927,#73993,.T.); +#73991 = VERTEX_POINT('',#73992); +#73992 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73993 = LINE('',#73994,#73995); +#73994 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#73995 = VECTOR('',#73996,1.); +#73996 = DIRECTION('',(0.,0.,1.)); +#73997 = ORIENTED_EDGE('',*,*,#73998,.F.); +#73998 = EDGE_CURVE('',#73966,#73991,#73999,.T.); +#73999 = LINE('',#74000,#74001); +#74000 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#74001 = VECTOR('',#74002,1.); +#74002 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74003 = PLANE('',#74004); +#74004 = AXIS2_PLACEMENT_3D('',#74005,#74006,#74007); +#74005 = CARTESIAN_POINT('',(4.1,-1.96,0.19)); +#74006 = DIRECTION('',(1.,0.,0.)); +#74007 = DIRECTION('',(0.,-1.,0.)); +#74008 = ADVANCED_FACE('',(#74009),#74034,.F.); +#74009 = FACE_BOUND('',#74010,.F.); +#74010 = EDGE_LOOP('',(#74011,#74019,#74027,#74033)); +#74011 = ORIENTED_EDGE('',*,*,#74012,.T.); +#74012 = EDGE_CURVE('',#73976,#74013,#74015,.T.); +#74013 = VERTEX_POINT('',#74014); +#74014 = CARTESIAN_POINT('',(4.4,-2.26,1.59)); +#74015 = LINE('',#74016,#74017); +#74016 = CARTESIAN_POINT('',(4.1,-2.26,1.59)); +#74017 = VECTOR('',#74018,1.); +#74018 = DIRECTION('',(1.,0.,0.)); +#74019 = ORIENTED_EDGE('',*,*,#74020,.T.); +#74020 = EDGE_CURVE('',#74013,#74021,#74023,.T.); +#74021 = VERTEX_POINT('',#74022); +#74022 = CARTESIAN_POINT('',(4.4,-1.96,1.59)); +#74023 = LINE('',#74024,#74025); +#74024 = CARTESIAN_POINT('',(4.4,-2.26,1.59)); +#74025 = VECTOR('',#74026,1.); +#74026 = DIRECTION('',(0.,1.,2.2E-16)); +#74027 = ORIENTED_EDGE('',*,*,#74028,.T.); +#74028 = EDGE_CURVE('',#74021,#73968,#74029,.T.); +#74029 = LINE('',#74030,#74031); +#74030 = CARTESIAN_POINT('',(4.4,-1.96,1.59)); +#74031 = VECTOR('',#74032,1.); +#74032 = DIRECTION('',(-1.,0.,0.)); +#74033 = ORIENTED_EDGE('',*,*,#73975,.T.); +#74034 = PLANE('',#74035); +#74035 = AXIS2_PLACEMENT_3D('',#74036,#74037,#74038); +#74036 = CARTESIAN_POINT('',(4.25,-2.11,1.59)); +#74037 = DIRECTION('',(0.,-2.2E-16,1.)); +#74038 = DIRECTION('',(1.,0.,0.)); +#74039 = ADVANCED_FACE('',(#74040),#74071,.T.); +#74040 = FACE_BOUND('',#74041,.T.); +#74041 = EDGE_LOOP('',(#74042,#74050,#74056,#74057,#74065)); +#74042 = ORIENTED_EDGE('',*,*,#74043,.T.); +#74043 = EDGE_CURVE('',#74044,#71054,#74046,.T.); +#74044 = VERTEX_POINT('',#74045); +#74045 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74046 = LINE('',#74047,#74048); +#74047 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74048 = VECTOR('',#74049,1.); +#74049 = DIRECTION('',(0.,0.,1.)); +#74050 = ORIENTED_EDGE('',*,*,#74051,.T.); +#74051 = EDGE_CURVE('',#71054,#74013,#74052,.T.); +#74052 = LINE('',#74053,#74054); +#74053 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74054 = VECTOR('',#74055,1.); +#74055 = DIRECTION('',(0.,0.,1.)); +#74056 = ORIENTED_EDGE('',*,*,#74020,.T.); +#74057 = ORIENTED_EDGE('',*,*,#74058,.F.); +#74058 = EDGE_CURVE('',#74059,#74021,#74061,.T.); +#74059 = VERTEX_POINT('',#74060); +#74060 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74061 = LINE('',#74062,#74063); +#74062 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74063 = VECTOR('',#74064,1.); +#74064 = DIRECTION('',(0.,0.,1.)); +#74065 = ORIENTED_EDGE('',*,*,#74066,.F.); +#74066 = EDGE_CURVE('',#74044,#74059,#74067,.T.); +#74067 = LINE('',#74068,#74069); +#74068 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74069 = VECTOR('',#74070,1.); +#74070 = DIRECTION('',(0.,1.,2.2E-16)); +#74071 = PLANE('',#74072); +#74072 = AXIS2_PLACEMENT_3D('',#74073,#74074,#74075); +#74073 = CARTESIAN_POINT('',(4.4,-2.26,0.19)); +#74074 = DIRECTION('',(-1.,0.,0.)); +#74075 = DIRECTION('',(0.,1.,0.)); +#74076 = ADVANCED_FACE('',(#74077),#74088,.T.); +#74077 = FACE_BOUND('',#74078,.T.); +#74078 = EDGE_LOOP('',(#74079,#74080,#74081,#74082)); +#74079 = ORIENTED_EDGE('',*,*,#74058,.T.); +#74080 = ORIENTED_EDGE('',*,*,#74028,.T.); +#74081 = ORIENTED_EDGE('',*,*,#73965,.F.); +#74082 = ORIENTED_EDGE('',*,*,#74083,.F.); +#74083 = EDGE_CURVE('',#74059,#73966,#74084,.T.); +#74084 = LINE('',#74085,#74086); +#74085 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74086 = VECTOR('',#74087,1.); +#74087 = DIRECTION('',(-1.,0.,0.)); +#74088 = PLANE('',#74089); +#74089 = AXIS2_PLACEMENT_3D('',#74090,#74091,#74092); +#74090 = CARTESIAN_POINT('',(4.4,-1.96,0.19)); +#74091 = DIRECTION('',(0.,-1.,0.)); +#74092 = DIRECTION('',(-1.,0.,0.)); +#74093 = ADVANCED_FACE('',(#74094),#74105,.F.); +#74094 = FACE_BOUND('',#74095,.F.); +#74095 = EDGE_LOOP('',(#74096,#74102,#74103,#74104)); +#74096 = ORIENTED_EDGE('',*,*,#74097,.F.); +#74097 = EDGE_CURVE('',#73880,#73991,#74098,.T.); +#74098 = LINE('',#74099,#74100); +#74099 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74100 = VECTOR('',#74101,1.); +#74101 = DIRECTION('',(1.,0.,0.)); +#74102 = ORIENTED_EDGE('',*,*,#73879,.T.); +#74103 = ORIENTED_EDGE('',*,*,#73926,.T.); +#74104 = ORIENTED_EDGE('',*,*,#73990,.F.); +#74105 = PLANE('',#74106); +#74106 = AXIS2_PLACEMENT_3D('',#74107,#74108,#74109); +#74107 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74108 = DIRECTION('',(0.,1.,0.)); +#74109 = DIRECTION('',(1.,0.,0.)); +#74110 = ADVANCED_FACE('',(#74111),#74122,.F.); +#74111 = FACE_BOUND('',#74112,.F.); +#74112 = EDGE_LOOP('',(#74113,#74114,#74115,#74121)); +#74113 = ORIENTED_EDGE('',*,*,#73857,.T.); +#74114 = ORIENTED_EDGE('',*,*,#73896,.T.); +#74115 = ORIENTED_EDGE('',*,*,#74116,.T.); +#74116 = EDGE_CURVE('',#73897,#73804,#74117,.T.); +#74117 = LINE('',#74118,#74119); +#74118 = CARTESIAN_POINT('',(3.55,-1.96,1.59)); +#74119 = VECTOR('',#74120,1.); +#74120 = DIRECTION('',(-1.,0.,0.)); +#74121 = ORIENTED_EDGE('',*,*,#73811,.T.); +#74122 = PLANE('',#74123); +#74123 = AXIS2_PLACEMENT_3D('',#74124,#74125,#74126); +#74124 = CARTESIAN_POINT('',(3.4,-2.11,1.59)); +#74125 = DIRECTION('',(0.,-2.2E-16,1.)); +#74126 = DIRECTION('',(1.,0.,0.)); +#74127 = ADVANCED_FACE('',(#74128),#74139,.T.); +#74128 = FACE_BOUND('',#74129,.T.); +#74129 = EDGE_LOOP('',(#74130,#74131,#74132,#74133)); +#74130 = ORIENTED_EDGE('',*,*,#73904,.T.); +#74131 = ORIENTED_EDGE('',*,*,#74116,.T.); +#74132 = ORIENTED_EDGE('',*,*,#73801,.F.); +#74133 = ORIENTED_EDGE('',*,*,#74134,.F.); +#74134 = EDGE_CURVE('',#73905,#73802,#74135,.T.); +#74135 = LINE('',#74136,#74137); +#74136 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#74137 = VECTOR('',#74138,1.); +#74138 = DIRECTION('',(-1.,0.,0.)); +#74139 = PLANE('',#74140); +#74140 = AXIS2_PLACEMENT_3D('',#74141,#74142,#74143); +#74141 = CARTESIAN_POINT('',(3.55,-1.96,0.19)); +#74142 = DIRECTION('',(0.,-1.,0.)); +#74143 = DIRECTION('',(-1.,0.,0.)); +#74144 = ADVANCED_FACE('',(#74145),#74156,.F.); +#74145 = FACE_BOUND('',#74146,.F.); +#74146 = EDGE_LOOP('',(#74147,#74153,#74154,#74155)); +#74147 = ORIENTED_EDGE('',*,*,#74148,.F.); +#74148 = EDGE_CURVE('',#73724,#73827,#74149,.T.); +#74149 = LINE('',#74150,#74151); +#74150 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74151 = VECTOR('',#74152,1.); +#74152 = DIRECTION('',(1.,0.,0.)); +#74153 = ORIENTED_EDGE('',*,*,#73723,.T.); +#74154 = ORIENTED_EDGE('',*,*,#73770,.T.); +#74155 = ORIENTED_EDGE('',*,*,#73826,.F.); +#74156 = PLANE('',#74157); +#74157 = AXIS2_PLACEMENT_3D('',#74158,#74159,#74160); +#74158 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74159 = DIRECTION('',(0.,1.,0.)); +#74160 = DIRECTION('',(1.,0.,0.)); +#74161 = ADVANCED_FACE('',(#74162),#74173,.F.); +#74162 = FACE_BOUND('',#74163,.F.); +#74163 = EDGE_LOOP('',(#74164,#74165,#74166,#74172)); +#74164 = ORIENTED_EDGE('',*,*,#73701,.T.); +#74165 = ORIENTED_EDGE('',*,*,#73740,.T.); +#74166 = ORIENTED_EDGE('',*,*,#74167,.T.); +#74167 = EDGE_CURVE('',#73741,#73648,#74168,.T.); +#74168 = LINE('',#74169,#74170); +#74169 = CARTESIAN_POINT('',(2.7,-1.96,1.59)); +#74170 = VECTOR('',#74171,1.); +#74171 = DIRECTION('',(-1.,0.,0.)); +#74172 = ORIENTED_EDGE('',*,*,#73655,.T.); +#74173 = PLANE('',#74174); +#74174 = AXIS2_PLACEMENT_3D('',#74175,#74176,#74177); +#74175 = CARTESIAN_POINT('',(2.55,-2.11,1.59)); +#74176 = DIRECTION('',(0.,-2.2E-16,1.)); +#74177 = DIRECTION('',(1.,0.,0.)); +#74178 = ADVANCED_FACE('',(#74179),#74190,.T.); +#74179 = FACE_BOUND('',#74180,.T.); +#74180 = EDGE_LOOP('',(#74181,#74182,#74183,#74184)); +#74181 = ORIENTED_EDGE('',*,*,#73748,.T.); +#74182 = ORIENTED_EDGE('',*,*,#74167,.T.); +#74183 = ORIENTED_EDGE('',*,*,#73645,.F.); +#74184 = ORIENTED_EDGE('',*,*,#74185,.F.); +#74185 = EDGE_CURVE('',#73749,#73646,#74186,.T.); +#74186 = LINE('',#74187,#74188); +#74187 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#74188 = VECTOR('',#74189,1.); +#74189 = DIRECTION('',(-1.,0.,0.)); +#74190 = PLANE('',#74191); +#74191 = AXIS2_PLACEMENT_3D('',#74192,#74193,#74194); +#74192 = CARTESIAN_POINT('',(2.7,-1.96,0.19)); +#74193 = DIRECTION('',(0.,-1.,0.)); +#74194 = DIRECTION('',(-1.,0.,0.)); +#74195 = ADVANCED_FACE('',(#74196),#74225,.F.); +#74196 = FACE_BOUND('',#74197,.F.); +#74197 = EDGE_LOOP('',(#74198,#74206,#74214,#74220,#74221,#74222,#74223, + #74224)); +#74198 = ORIENTED_EDGE('',*,*,#74199,.T.); +#74199 = EDGE_CURVE('',#73616,#74200,#74202,.T.); +#74200 = VERTEX_POINT('',#74201); +#74201 = CARTESIAN_POINT('',(2.275,-2.76,1.19)); +#74202 = LINE('',#74203,#74204); +#74203 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74204 = VECTOR('',#74205,1.); +#74205 = DIRECTION('',(0.,-1.,2.2E-16)); +#74206 = ORIENTED_EDGE('',*,*,#74207,.T.); +#74207 = EDGE_CURVE('',#74200,#74208,#74210,.T.); +#74208 = VERTEX_POINT('',#74209); +#74209 = CARTESIAN_POINT('',(3.675,-2.76,1.19)); +#74210 = LINE('',#74211,#74212); +#74211 = CARTESIAN_POINT('',(2.275,-2.76,1.19)); +#74212 = VECTOR('',#74213,1.); +#74213 = DIRECTION('',(1.,0.,0.)); +#74214 = ORIENTED_EDGE('',*,*,#74215,.F.); +#74215 = EDGE_CURVE('',#73936,#74208,#74216,.T.); +#74216 = LINE('',#74217,#74218); +#74217 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#74218 = VECTOR('',#74219,1.); +#74219 = DIRECTION('',(0.,-1.,2.2E-16)); +#74220 = ORIENTED_EDGE('',*,*,#73935,.F.); +#74221 = ORIENTED_EDGE('',*,*,#73848,.F.); +#74222 = ORIENTED_EDGE('',*,*,#73779,.F.); +#74223 = ORIENTED_EDGE('',*,*,#73692,.F.); +#74224 = ORIENTED_EDGE('',*,*,#73623,.F.); +#74225 = PLANE('',#74226); +#74226 = AXIS2_PLACEMENT_3D('',#74227,#74228,#74229); +#74227 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74228 = DIRECTION('',(0.,2.2E-16,1.)); +#74229 = DIRECTION('',(1.,0.,-0.)); +#74230 = ADVANCED_FACE('',(#74231),#74242,.F.); +#74231 = FACE_BOUND('',#74232,.F.); +#74232 = EDGE_LOOP('',(#74233,#74239,#74240,#74241)); +#74233 = ORIENTED_EDGE('',*,*,#74234,.F.); +#74234 = EDGE_CURVE('',#73560,#73671,#74235,.T.); +#74235 = LINE('',#74236,#74237); +#74236 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74237 = VECTOR('',#74238,1.); +#74238 = DIRECTION('',(1.,0.,0.)); +#74239 = ORIENTED_EDGE('',*,*,#73559,.T.); +#74240 = ORIENTED_EDGE('',*,*,#73606,.T.); +#74241 = ORIENTED_EDGE('',*,*,#73670,.F.); +#74242 = PLANE('',#74243); +#74243 = AXIS2_PLACEMENT_3D('',#74244,#74245,#74246); +#74244 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74245 = DIRECTION('',(0.,1.,0.)); +#74246 = DIRECTION('',(1.,0.,0.)); +#74247 = ADVANCED_FACE('',(#74248),#74259,.T.); +#74248 = FACE_BOUND('',#74249,.T.); +#74249 = EDGE_LOOP('',(#74250,#74251,#74252,#74253)); +#74250 = ORIENTED_EDGE('',*,*,#73584,.T.); +#74251 = ORIENTED_EDGE('',*,*,#73544,.T.); +#74252 = ORIENTED_EDGE('',*,*,#73489,.F.); +#74253 = ORIENTED_EDGE('',*,*,#74254,.F.); +#74254 = EDGE_CURVE('',#73585,#73490,#74255,.T.); +#74255 = LINE('',#74256,#74257); +#74256 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#74257 = VECTOR('',#74258,1.); +#74258 = DIRECTION('',(-1.,0.,0.)); +#74259 = PLANE('',#74260); +#74260 = AXIS2_PLACEMENT_3D('',#74261,#74262,#74263); +#74261 = CARTESIAN_POINT('',(1.85,-1.96,0.19)); +#74262 = DIRECTION('',(0.,-1.,0.)); +#74263 = DIRECTION('',(-1.,0.,0.)); +#74264 = ADVANCED_FACE('',(#74265),#74277,.T.); +#74265 = FACE_BOUND('',#74266,.T.); +#74266 = EDGE_LOOP('',(#74267,#74268,#74269,#74270,#74271)); +#74267 = ORIENTED_EDGE('',*,*,#71093,.F.); +#74268 = ORIENTED_EDGE('',*,*,#73507,.T.); +#74269 = ORIENTED_EDGE('',*,*,#73528,.T.); +#74270 = ORIENTED_EDGE('',*,*,#73577,.F.); +#74271 = ORIENTED_EDGE('',*,*,#74272,.T.); +#74272 = EDGE_CURVE('',#73570,#71086,#74273,.T.); +#74273 = LINE('',#74274,#74275); +#74274 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74275 = VECTOR('',#74276,1.); +#74276 = DIRECTION('',(-0.707106781187,1.599999999999E-16, + -0.707106781187)); +#74277 = PLANE('',#74278); +#74278 = AXIS2_PLACEMENT_3D('',#74279,#74280,#74281); +#74279 = CARTESIAN_POINT('',(1.55,-2.26,0.19)); +#74280 = DIRECTION('',(0.,1.,0.)); +#74281 = DIRECTION('',(1.,0.,0.)); +#74282 = ADVANCED_FACE('',(#74283),#74295,.T.); +#74283 = FACE_BOUND('',#74284,.T.); +#74284 = EDGE_LOOP('',(#74285,#74286,#74292,#74293,#74294)); +#74285 = ORIENTED_EDGE('',*,*,#74199,.T.); +#74286 = ORIENTED_EDGE('',*,*,#74287,.T.); +#74287 = EDGE_CURVE('',#74200,#71078,#74288,.T.); +#74288 = LINE('',#74289,#74290); +#74289 = CARTESIAN_POINT('',(2.275,-2.76,1.19)); +#74290 = VECTOR('',#74291,1.); +#74291 = DIRECTION('',(-0.707106781187,1.599999999999E-16, + -0.707106781187)); +#74292 = ORIENTED_EDGE('',*,*,#71085,.F.); +#74293 = ORIENTED_EDGE('',*,*,#74272,.F.); +#74294 = ORIENTED_EDGE('',*,*,#73615,.F.); +#74295 = PLANE('',#74296); +#74296 = AXIS2_PLACEMENT_3D('',#74297,#74298,#74299); +#74297 = CARTESIAN_POINT('',(2.275,-2.26,1.19)); +#74298 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#74299 = DIRECTION('',(-0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#74300 = ADVANCED_FACE('',(#74301),#74312,.T.); +#74301 = FACE_BOUND('',#74302,.F.); +#74302 = EDGE_LOOP('',(#74303,#74304,#74310,#74311)); +#74303 = ORIENTED_EDGE('',*,*,#71077,.T.); +#74304 = ORIENTED_EDGE('',*,*,#74305,.F.); +#74305 = EDGE_CURVE('',#74208,#71070,#74306,.T.); +#74306 = LINE('',#74307,#74308); +#74307 = CARTESIAN_POINT('',(3.675,-2.76,1.19)); +#74308 = VECTOR('',#74309,1.); +#74309 = DIRECTION('',(0.707106781187,1.599999999999E-16,-0.707106781187 + )); +#74310 = ORIENTED_EDGE('',*,*,#74207,.F.); +#74311 = ORIENTED_EDGE('',*,*,#74287,.T.); +#74312 = PLANE('',#74313); +#74313 = AXIS2_PLACEMENT_3D('',#74314,#74315,#74316); +#74314 = CARTESIAN_POINT('',(2.975,-2.76,0.826809470956)); +#74315 = DIRECTION('',(0.,1.,2.2E-16)); +#74316 = DIRECTION('',(0.,-2.2E-16,1.)); +#74317 = ADVANCED_FACE('',(#74318),#74330,.F.); +#74318 = FACE_BOUND('',#74319,.F.); +#74319 = EDGE_LOOP('',(#74320,#74321,#74322,#74323,#74329)); +#74320 = ORIENTED_EDGE('',*,*,#74215,.T.); +#74321 = ORIENTED_EDGE('',*,*,#74305,.T.); +#74322 = ORIENTED_EDGE('',*,*,#71069,.F.); +#74323 = ORIENTED_EDGE('',*,*,#74324,.F.); +#74324 = EDGE_CURVE('',#73944,#71062,#74325,.T.); +#74325 = LINE('',#74326,#74327); +#74326 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#74327 = VECTOR('',#74328,1.); +#74328 = DIRECTION('',(0.707106781187,1.599999999999E-16,-0.707106781187 + )); +#74329 = ORIENTED_EDGE('',*,*,#73943,.F.); +#74330 = PLANE('',#74331); +#74331 = AXIS2_PLACEMENT_3D('',#74332,#74333,#74334); +#74332 = CARTESIAN_POINT('',(3.675,-2.26,1.19)); +#74333 = DIRECTION('',(0.707106781187,1.599999999999E-16,0.707106781187) + ); +#74334 = DIRECTION('',(0.707106781187,-1.599999999999E-16, + -0.707106781187)); +#74335 = ADVANCED_FACE('',(#74336),#74343,.T.); +#74336 = FACE_BOUND('',#74337,.T.); +#74337 = EDGE_LOOP('',(#74338,#74339,#74340,#74341,#74342)); +#74338 = ORIENTED_EDGE('',*,*,#71061,.F.); +#74339 = ORIENTED_EDGE('',*,*,#74324,.F.); +#74340 = ORIENTED_EDGE('',*,*,#73983,.T.); +#74341 = ORIENTED_EDGE('',*,*,#74012,.T.); +#74342 = ORIENTED_EDGE('',*,*,#74051,.F.); +#74343 = PLANE('',#74344); +#74344 = AXIS2_PLACEMENT_3D('',#74345,#74346,#74347); +#74345 = CARTESIAN_POINT('',(4.1,-2.26,0.19)); +#74346 = DIRECTION('',(0.,1.,0.)); +#74347 = DIRECTION('',(1.,0.,0.)); +#74348 = ADVANCED_FACE('',(#74349),#74367,.F.); +#74349 = FACE_BOUND('',#74350,.F.); +#74350 = EDGE_LOOP('',(#74351,#74359,#74360,#74361)); +#74351 = ORIENTED_EDGE('',*,*,#74352,.F.); +#74352 = EDGE_CURVE('',#74044,#74353,#74355,.T.); +#74353 = VERTEX_POINT('',#74354); +#74354 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74355 = LINE('',#74356,#74357); +#74356 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74357 = VECTOR('',#74358,1.); +#74358 = DIRECTION('',(1.,0.,0.)); +#74359 = ORIENTED_EDGE('',*,*,#74043,.T.); +#74360 = ORIENTED_EDGE('',*,*,#71053,.T.); +#74361 = ORIENTED_EDGE('',*,*,#74362,.F.); +#74362 = EDGE_CURVE('',#74353,#71046,#74363,.T.); +#74363 = LINE('',#74364,#74365); +#74364 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74365 = VECTOR('',#74366,1.); +#74366 = DIRECTION('',(0.,0.,1.)); +#74367 = PLANE('',#74368); +#74368 = AXIS2_PLACEMENT_3D('',#74369,#74370,#74371); +#74369 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74370 = DIRECTION('',(0.,1.,0.)); +#74371 = DIRECTION('',(1.,0.,0.)); +#74372 = ADVANCED_FACE('',(#74373),#74406,.T.); +#74373 = FACE_BOUND('',#74374,.T.); +#74374 = EDGE_LOOP('',(#74375,#74385,#74393,#74399,#74400)); +#74375 = ORIENTED_EDGE('',*,*,#74376,.T.); +#74376 = EDGE_CURVE('',#74377,#74379,#74381,.T.); +#74377 = VERTEX_POINT('',#74378); +#74378 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74379 = VERTEX_POINT('',#74380); +#74380 = CARTESIAN_POINT('',(4.95,-1.96,1.59)); +#74381 = LINE('',#74382,#74383); +#74382 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74383 = VECTOR('',#74384,1.); +#74384 = DIRECTION('',(0.,0.,1.)); +#74385 = ORIENTED_EDGE('',*,*,#74386,.T.); +#74386 = EDGE_CURVE('',#74379,#74387,#74389,.T.); +#74387 = VERTEX_POINT('',#74388); +#74388 = CARTESIAN_POINT('',(4.95,-2.26,1.59)); +#74389 = LINE('',#74390,#74391); +#74390 = CARTESIAN_POINT('',(4.95,-1.96,1.59)); +#74391 = VECTOR('',#74392,1.); +#74392 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74393 = ORIENTED_EDGE('',*,*,#74394,.F.); +#74394 = EDGE_CURVE('',#71046,#74387,#74395,.T.); +#74395 = LINE('',#74396,#74397); +#74396 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74397 = VECTOR('',#74398,1.); +#74398 = DIRECTION('',(0.,0.,1.)); +#74399 = ORIENTED_EDGE('',*,*,#74362,.F.); +#74400 = ORIENTED_EDGE('',*,*,#74401,.F.); +#74401 = EDGE_CURVE('',#74377,#74353,#74402,.T.); +#74402 = LINE('',#74403,#74404); +#74403 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74404 = VECTOR('',#74405,1.); +#74405 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74406 = PLANE('',#74407); +#74407 = AXIS2_PLACEMENT_3D('',#74408,#74409,#74410); +#74408 = CARTESIAN_POINT('',(4.95,-1.96,0.19)); +#74409 = DIRECTION('',(1.,0.,0.)); +#74410 = DIRECTION('',(0.,-1.,0.)); +#74411 = ADVANCED_FACE('',(#74412),#74437,.F.); +#74412 = FACE_BOUND('',#74413,.F.); +#74413 = EDGE_LOOP('',(#74414,#74422,#74430,#74436)); +#74414 = ORIENTED_EDGE('',*,*,#74415,.T.); +#74415 = EDGE_CURVE('',#74387,#74416,#74418,.T.); +#74416 = VERTEX_POINT('',#74417); +#74417 = CARTESIAN_POINT('',(5.25,-2.26,1.59)); +#74418 = LINE('',#74419,#74420); +#74419 = CARTESIAN_POINT('',(4.95,-2.26,1.59)); +#74420 = VECTOR('',#74421,1.); +#74421 = DIRECTION('',(1.,0.,0.)); +#74422 = ORIENTED_EDGE('',*,*,#74423,.T.); +#74423 = EDGE_CURVE('',#74416,#74424,#74426,.T.); +#74424 = VERTEX_POINT('',#74425); +#74425 = CARTESIAN_POINT('',(5.25,-1.96,1.59)); +#74426 = LINE('',#74427,#74428); +#74427 = CARTESIAN_POINT('',(5.25,-2.26,1.59)); +#74428 = VECTOR('',#74429,1.); +#74429 = DIRECTION('',(0.,1.,2.2E-16)); +#74430 = ORIENTED_EDGE('',*,*,#74431,.T.); +#74431 = EDGE_CURVE('',#74424,#74379,#74432,.T.); +#74432 = LINE('',#74433,#74434); +#74433 = CARTESIAN_POINT('',(5.25,-1.96,1.59)); +#74434 = VECTOR('',#74435,1.); +#74435 = DIRECTION('',(-1.,0.,0.)); +#74436 = ORIENTED_EDGE('',*,*,#74386,.T.); +#74437 = PLANE('',#74438); +#74438 = AXIS2_PLACEMENT_3D('',#74439,#74440,#74441); +#74439 = CARTESIAN_POINT('',(5.1,-2.11,1.59)); +#74440 = DIRECTION('',(0.,-2.2E-16,1.)); +#74441 = DIRECTION('',(1.,0.,0.)); +#74442 = ADVANCED_FACE('',(#74443),#74474,.T.); +#74443 = FACE_BOUND('',#74444,.T.); +#74444 = EDGE_LOOP('',(#74445,#74453,#74459,#74460,#74468)); +#74445 = ORIENTED_EDGE('',*,*,#74446,.T.); +#74446 = EDGE_CURVE('',#74447,#71038,#74449,.T.); +#74447 = VERTEX_POINT('',#74448); +#74448 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74449 = LINE('',#74450,#74451); +#74450 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74451 = VECTOR('',#74452,1.); +#74452 = DIRECTION('',(0.,0.,1.)); +#74453 = ORIENTED_EDGE('',*,*,#74454,.T.); +#74454 = EDGE_CURVE('',#71038,#74416,#74455,.T.); +#74455 = LINE('',#74456,#74457); +#74456 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74457 = VECTOR('',#74458,1.); +#74458 = DIRECTION('',(0.,0.,1.)); +#74459 = ORIENTED_EDGE('',*,*,#74423,.T.); +#74460 = ORIENTED_EDGE('',*,*,#74461,.F.); +#74461 = EDGE_CURVE('',#74462,#74424,#74464,.T.); +#74462 = VERTEX_POINT('',#74463); +#74463 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74464 = LINE('',#74465,#74466); +#74465 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74466 = VECTOR('',#74467,1.); +#74467 = DIRECTION('',(0.,0.,1.)); +#74468 = ORIENTED_EDGE('',*,*,#74469,.F.); +#74469 = EDGE_CURVE('',#74447,#74462,#74470,.T.); +#74470 = LINE('',#74471,#74472); +#74471 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74472 = VECTOR('',#74473,1.); +#74473 = DIRECTION('',(0.,1.,2.2E-16)); +#74474 = PLANE('',#74475); +#74475 = AXIS2_PLACEMENT_3D('',#74476,#74477,#74478); +#74476 = CARTESIAN_POINT('',(5.25,-2.26,0.19)); +#74477 = DIRECTION('',(-1.,0.,0.)); +#74478 = DIRECTION('',(0.,1.,0.)); +#74479 = ADVANCED_FACE('',(#74480),#74491,.T.); +#74480 = FACE_BOUND('',#74481,.T.); +#74481 = EDGE_LOOP('',(#74482,#74483,#74484,#74485)); +#74482 = ORIENTED_EDGE('',*,*,#74461,.T.); +#74483 = ORIENTED_EDGE('',*,*,#74431,.T.); +#74484 = ORIENTED_EDGE('',*,*,#74376,.F.); +#74485 = ORIENTED_EDGE('',*,*,#74486,.F.); +#74486 = EDGE_CURVE('',#74462,#74377,#74487,.T.); +#74487 = LINE('',#74488,#74489); +#74488 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74489 = VECTOR('',#74490,1.); +#74490 = DIRECTION('',(-1.,0.,0.)); +#74491 = PLANE('',#74492); +#74492 = AXIS2_PLACEMENT_3D('',#74493,#74494,#74495); +#74493 = CARTESIAN_POINT('',(5.25,-1.96,0.19)); +#74494 = DIRECTION('',(0.,-1.,0.)); +#74495 = DIRECTION('',(-1.,0.,0.)); +#74496 = ADVANCED_FACE('',(#74497),#74503,.T.); +#74497 = FACE_BOUND('',#74498,.T.); +#74498 = EDGE_LOOP('',(#74499,#74500,#74501,#74502)); +#74499 = ORIENTED_EDGE('',*,*,#71045,.F.); +#74500 = ORIENTED_EDGE('',*,*,#74394,.T.); +#74501 = ORIENTED_EDGE('',*,*,#74415,.T.); +#74502 = ORIENTED_EDGE('',*,*,#74454,.F.); +#74503 = PLANE('',#74504); +#74504 = AXIS2_PLACEMENT_3D('',#74505,#74506,#74507); +#74505 = CARTESIAN_POINT('',(4.95,-2.26,0.19)); +#74506 = DIRECTION('',(0.,1.,0.)); +#74507 = DIRECTION('',(1.,0.,0.)); +#74508 = ADVANCED_FACE('',(#74509),#74527,.F.); +#74509 = FACE_BOUND('',#74510,.F.); +#74510 = EDGE_LOOP('',(#74511,#74519,#74520,#74521)); +#74511 = ORIENTED_EDGE('',*,*,#74512,.F.); +#74512 = EDGE_CURVE('',#74447,#74513,#74515,.T.); +#74513 = VERTEX_POINT('',#74514); +#74514 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74515 = LINE('',#74516,#74517); +#74516 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74517 = VECTOR('',#74518,1.); +#74518 = DIRECTION('',(1.,0.,0.)); +#74519 = ORIENTED_EDGE('',*,*,#74446,.T.); +#74520 = ORIENTED_EDGE('',*,*,#71037,.T.); +#74521 = ORIENTED_EDGE('',*,*,#74522,.F.); +#74522 = EDGE_CURVE('',#74513,#71030,#74523,.T.); +#74523 = LINE('',#74524,#74525); +#74524 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74525 = VECTOR('',#74526,1.); +#74526 = DIRECTION('',(0.,0.,1.)); +#74527 = PLANE('',#74528); +#74528 = AXIS2_PLACEMENT_3D('',#74529,#74530,#74531); +#74529 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74530 = DIRECTION('',(0.,1.,0.)); +#74531 = DIRECTION('',(1.,0.,0.)); +#74532 = ADVANCED_FACE('',(#74533),#74566,.T.); +#74533 = FACE_BOUND('',#74534,.T.); +#74534 = EDGE_LOOP('',(#74535,#74545,#74553,#74559,#74560)); +#74535 = ORIENTED_EDGE('',*,*,#74536,.T.); +#74536 = EDGE_CURVE('',#74537,#74539,#74541,.T.); +#74537 = VERTEX_POINT('',#74538); +#74538 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74539 = VERTEX_POINT('',#74540); +#74540 = CARTESIAN_POINT('',(5.8,-1.96,1.59)); +#74541 = LINE('',#74542,#74543); +#74542 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74543 = VECTOR('',#74544,1.); +#74544 = DIRECTION('',(0.,0.,1.)); +#74545 = ORIENTED_EDGE('',*,*,#74546,.T.); +#74546 = EDGE_CURVE('',#74539,#74547,#74549,.T.); +#74547 = VERTEX_POINT('',#74548); +#74548 = CARTESIAN_POINT('',(5.8,-2.26,1.59)); +#74549 = LINE('',#74550,#74551); +#74550 = CARTESIAN_POINT('',(5.8,-1.96,1.59)); +#74551 = VECTOR('',#74552,1.); +#74552 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74553 = ORIENTED_EDGE('',*,*,#74554,.F.); +#74554 = EDGE_CURVE('',#71030,#74547,#74555,.T.); +#74555 = LINE('',#74556,#74557); +#74556 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74557 = VECTOR('',#74558,1.); +#74558 = DIRECTION('',(0.,0.,1.)); +#74559 = ORIENTED_EDGE('',*,*,#74522,.F.); +#74560 = ORIENTED_EDGE('',*,*,#74561,.F.); +#74561 = EDGE_CURVE('',#74537,#74513,#74562,.T.); +#74562 = LINE('',#74563,#74564); +#74563 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74564 = VECTOR('',#74565,1.); +#74565 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74566 = PLANE('',#74567); +#74567 = AXIS2_PLACEMENT_3D('',#74568,#74569,#74570); +#74568 = CARTESIAN_POINT('',(5.8,-1.96,0.19)); +#74569 = DIRECTION('',(1.,0.,0.)); +#74570 = DIRECTION('',(0.,-1.,0.)); +#74571 = ADVANCED_FACE('',(#74572),#74597,.F.); +#74572 = FACE_BOUND('',#74573,.F.); +#74573 = EDGE_LOOP('',(#74574,#74582,#74590,#74596)); +#74574 = ORIENTED_EDGE('',*,*,#74575,.T.); +#74575 = EDGE_CURVE('',#74547,#74576,#74578,.T.); +#74576 = VERTEX_POINT('',#74577); +#74577 = CARTESIAN_POINT('',(6.1,-2.26,1.59)); +#74578 = LINE('',#74579,#74580); +#74579 = CARTESIAN_POINT('',(5.8,-2.26,1.59)); +#74580 = VECTOR('',#74581,1.); +#74581 = DIRECTION('',(1.,0.,0.)); +#74582 = ORIENTED_EDGE('',*,*,#74583,.T.); +#74583 = EDGE_CURVE('',#74576,#74584,#74586,.T.); +#74584 = VERTEX_POINT('',#74585); +#74585 = CARTESIAN_POINT('',(6.1,-1.96,1.59)); +#74586 = LINE('',#74587,#74588); +#74587 = CARTESIAN_POINT('',(6.1,-2.26,1.59)); +#74588 = VECTOR('',#74589,1.); +#74589 = DIRECTION('',(0.,1.,2.2E-16)); +#74590 = ORIENTED_EDGE('',*,*,#74591,.T.); +#74591 = EDGE_CURVE('',#74584,#74539,#74592,.T.); +#74592 = LINE('',#74593,#74594); +#74593 = CARTESIAN_POINT('',(6.1,-1.96,1.59)); +#74594 = VECTOR('',#74595,1.); +#74595 = DIRECTION('',(-1.,0.,0.)); +#74596 = ORIENTED_EDGE('',*,*,#74546,.T.); +#74597 = PLANE('',#74598); +#74598 = AXIS2_PLACEMENT_3D('',#74599,#74600,#74601); +#74599 = CARTESIAN_POINT('',(5.95,-2.11,1.59)); +#74600 = DIRECTION('',(0.,-2.2E-16,1.)); +#74601 = DIRECTION('',(1.,0.,0.)); +#74602 = ADVANCED_FACE('',(#74603),#74634,.T.); +#74603 = FACE_BOUND('',#74604,.T.); +#74604 = EDGE_LOOP('',(#74605,#74613,#74619,#74620,#74628)); +#74605 = ORIENTED_EDGE('',*,*,#74606,.T.); +#74606 = EDGE_CURVE('',#74607,#71022,#74609,.T.); +#74607 = VERTEX_POINT('',#74608); +#74608 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74609 = LINE('',#74610,#74611); +#74610 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74611 = VECTOR('',#74612,1.); +#74612 = DIRECTION('',(0.,0.,1.)); +#74613 = ORIENTED_EDGE('',*,*,#74614,.T.); +#74614 = EDGE_CURVE('',#71022,#74576,#74615,.T.); +#74615 = LINE('',#74616,#74617); +#74616 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74617 = VECTOR('',#74618,1.); +#74618 = DIRECTION('',(0.,0.,1.)); +#74619 = ORIENTED_EDGE('',*,*,#74583,.T.); +#74620 = ORIENTED_EDGE('',*,*,#74621,.F.); +#74621 = EDGE_CURVE('',#74622,#74584,#74624,.T.); +#74622 = VERTEX_POINT('',#74623); +#74623 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74624 = LINE('',#74625,#74626); +#74625 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74626 = VECTOR('',#74627,1.); +#74627 = DIRECTION('',(0.,0.,1.)); +#74628 = ORIENTED_EDGE('',*,*,#74629,.F.); +#74629 = EDGE_CURVE('',#74607,#74622,#74630,.T.); +#74630 = LINE('',#74631,#74632); +#74631 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74632 = VECTOR('',#74633,1.); +#74633 = DIRECTION('',(0.,1.,2.2E-16)); +#74634 = PLANE('',#74635); +#74635 = AXIS2_PLACEMENT_3D('',#74636,#74637,#74638); +#74636 = CARTESIAN_POINT('',(6.1,-2.26,0.19)); +#74637 = DIRECTION('',(-1.,0.,0.)); +#74638 = DIRECTION('',(0.,1.,0.)); +#74639 = ADVANCED_FACE('',(#74640),#74651,.T.); +#74640 = FACE_BOUND('',#74641,.T.); +#74641 = EDGE_LOOP('',(#74642,#74643,#74644,#74645)); +#74642 = ORIENTED_EDGE('',*,*,#74621,.T.); +#74643 = ORIENTED_EDGE('',*,*,#74591,.T.); +#74644 = ORIENTED_EDGE('',*,*,#74536,.F.); +#74645 = ORIENTED_EDGE('',*,*,#74646,.F.); +#74646 = EDGE_CURVE('',#74622,#74537,#74647,.T.); +#74647 = LINE('',#74648,#74649); +#74648 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74649 = VECTOR('',#74650,1.); +#74650 = DIRECTION('',(-1.,0.,0.)); +#74651 = PLANE('',#74652); +#74652 = AXIS2_PLACEMENT_3D('',#74653,#74654,#74655); +#74653 = CARTESIAN_POINT('',(6.1,-1.96,0.19)); +#74654 = DIRECTION('',(0.,-1.,0.)); +#74655 = DIRECTION('',(-1.,0.,0.)); +#74656 = ADVANCED_FACE('',(#74657),#74663,.T.); +#74657 = FACE_BOUND('',#74658,.T.); +#74658 = EDGE_LOOP('',(#74659,#74660,#74661,#74662)); +#74659 = ORIENTED_EDGE('',*,*,#71029,.F.); +#74660 = ORIENTED_EDGE('',*,*,#74554,.T.); +#74661 = ORIENTED_EDGE('',*,*,#74575,.T.); +#74662 = ORIENTED_EDGE('',*,*,#74614,.F.); +#74663 = PLANE('',#74664); +#74664 = AXIS2_PLACEMENT_3D('',#74665,#74666,#74667); +#74665 = CARTESIAN_POINT('',(5.8,-2.26,0.19)); +#74666 = DIRECTION('',(0.,1.,0.)); +#74667 = DIRECTION('',(1.,0.,0.)); +#74668 = ADVANCED_FACE('',(#74669),#74680,.T.); +#74669 = FACE_BOUND('',#74670,.F.); +#74670 = EDGE_LOOP('',(#74671,#74677,#74678,#74679)); +#74671 = ORIENTED_EDGE('',*,*,#74672,.F.); +#74672 = EDGE_CURVE('',#70982,#71582,#74673,.T.); +#74673 = LINE('',#74674,#74675); +#74674 = CARTESIAN_POINT('',(6.145,-3.93,0.59)); +#74675 = VECTOR('',#74676,1.); +#74676 = DIRECTION('',(-1.999999999999E-16,-0.707106781187, + 0.707106781187)); +#74677 = ORIENTED_EDGE('',*,*,#71014,.T.); +#74678 = ORIENTED_EDGE('',*,*,#72961,.T.); +#74679 = ORIENTED_EDGE('',*,*,#71590,.F.); +#74680 = PLANE('',#74681); +#74681 = AXIS2_PLACEMENT_3D('',#74682,#74683,#74684); +#74682 = CARTESIAN_POINT('',(6.145,-3.995,0.655)); +#74683 = DIRECTION('',(-0.,-0.707106781187,-0.707106781187)); +#74684 = DIRECTION('',(1.,-0.,0.)); +#74685 = ADVANCED_FACE('',(#74686),#74694,.T.); +#74686 = FACE_BOUND('',#74687,.T.); +#74687 = EDGE_LOOP('',(#74688,#74689,#74690,#74691,#74692,#74693)); +#74688 = ORIENTED_EDGE('',*,*,#71165,.T.); +#74689 = ORIENTED_EDGE('',*,*,#71004,.T.); +#74690 = ORIENTED_EDGE('',*,*,#72954,.T.); +#74691 = ORIENTED_EDGE('',*,*,#71438,.F.); +#74692 = ORIENTED_EDGE('',*,*,#71408,.T.); +#74693 = ORIENTED_EDGE('',*,*,#71320,.F.); +#74694 = CYLINDRICAL_SURFACE('',#74695,1.); +#74695 = AXIS2_PLACEMENT_3D('',#74696,#74697,#74698); +#74696 = CARTESIAN_POINT('',(-0.195,-2.26,1.59)); +#74697 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74698 = DIRECTION('',(-1.,-0.,0.)); +#74699 = ADVANCED_FACE('',(#74700),#74706,.T.); +#74700 = FACE_BOUND('',#74701,.T.); +#74701 = EDGE_LOOP('',(#74702,#74703,#74704,#74705)); +#74702 = ORIENTED_EDGE('',*,*,#71581,.T.); +#74703 = ORIENTED_EDGE('',*,*,#74672,.F.); +#74704 = ORIENTED_EDGE('',*,*,#70981,.F.); +#74705 = ORIENTED_EDGE('',*,*,#71635,.T.); +#74706 = CONICAL_SURFACE('',#74707,1.,0.785398163397); +#74707 = AXIS2_PLACEMENT_3D('',#74708,#74709,#74710); +#74708 = CARTESIAN_POINT('',(6.145,-3.93,1.59)); +#74709 = DIRECTION('',(0.,1.,3.5E-16)); +#74710 = DIRECTION('',(1.,-7.7E-32,2.2E-16)); +#74711 = ADVANCED_FACE('',(#74712),#74731,.F.); +#74712 = FACE_BOUND('',#74713,.F.); +#74713 = EDGE_LOOP('',(#74714,#74722,#74723,#74724,#74725)); +#74714 = ORIENTED_EDGE('',*,*,#74715,.F.); +#74715 = EDGE_CURVE('',#74607,#74716,#74718,.T.); +#74716 = VERTEX_POINT('',#74717); +#74717 = CARTESIAN_POINT('',(7.,-2.26,0.19)); +#74718 = LINE('',#74719,#74720); +#74719 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74720 = VECTOR('',#74721,1.); +#74721 = DIRECTION('',(1.,0.,0.)); +#74722 = ORIENTED_EDGE('',*,*,#74606,.T.); +#74723 = ORIENTED_EDGE('',*,*,#71021,.T.); +#74724 = ORIENTED_EDGE('',*,*,#70954,.T.); +#74725 = ORIENTED_EDGE('',*,*,#74726,.F.); +#74726 = EDGE_CURVE('',#74716,#70957,#74727,.T.); +#74727 = LINE('',#74728,#74729); +#74728 = CARTESIAN_POINT('',(7.,-2.26,0.19)); +#74729 = VECTOR('',#74730,1.); +#74730 = DIRECTION('',(0.,0.,1.)); +#74731 = PLANE('',#74732); +#74732 = AXIS2_PLACEMENT_3D('',#74733,#74734,#74735); +#74733 = CARTESIAN_POINT('',(-1.195,-2.26,0.19)); +#74734 = DIRECTION('',(0.,1.,0.)); +#74735 = DIRECTION('',(1.,0.,0.)); +#74736 = ADVANCED_FACE('',(#74737),#74743,.T.); +#74737 = FACE_BOUND('',#74738,.T.); +#74738 = EDGE_LOOP('',(#74739,#74740,#74741,#74742)); +#74739 = ORIENTED_EDGE('',*,*,#71676,.T.); +#74740 = ORIENTED_EDGE('',*,*,#71629,.T.); +#74741 = ORIENTED_EDGE('',*,*,#70973,.F.); +#74742 = ORIENTED_EDGE('',*,*,#70932,.F.); +#74743 = PLANE('',#74744); +#74744 = AXIS2_PLACEMENT_3D('',#74745,#74746,#74747); +#74745 = CARTESIAN_POINT('',(7.145,-2.26,3.15)); +#74746 = DIRECTION('',(1.,0.,0.)); +#74747 = DIRECTION('',(0.,2.2E-16,-1.)); +#74748 = ADVANCED_FACE('',(#74749),#74763,.T.); +#74749 = FACE_BOUND('',#74750,.T.); +#74750 = EDGE_LOOP('',(#74751,#74758,#74759,#74760,#74761,#74762)); +#74751 = ORIENTED_EDGE('',*,*,#74752,.T.); +#74752 = EDGE_CURVE('',#70917,#71803,#74753,.T.); +#74753 = CIRCLE('',#74754,1.); +#74754 = AXIS2_PLACEMENT_3D('',#74755,#74756,#74757); +#74755 = CARTESIAN_POINT('',(6.145,0.56,2.15)); +#74756 = DIRECTION('',(0.,-1.,0.)); +#74757 = DIRECTION('',(0.,0.,-1.)); +#74758 = ORIENTED_EDGE('',*,*,#71817,.T.); +#74759 = ORIENTED_EDGE('',*,*,#71785,.T.); +#74760 = ORIENTED_EDGE('',*,*,#71753,.T.); +#74761 = ORIENTED_EDGE('',*,*,#71832,.F.); +#74762 = ORIENTED_EDGE('',*,*,#70924,.F.); +#74763 = CYLINDRICAL_SURFACE('',#74764,1.); +#74764 = AXIS2_PLACEMENT_3D('',#74765,#74766,#74767); +#74765 = CARTESIAN_POINT('',(6.145,-0.44,2.15)); +#74766 = DIRECTION('',(0.,-1.,0.)); +#74767 = DIRECTION('',(1.,0.,0.)); +#74768 = ADVANCED_FACE('',(#74769),#74809,.T.); +#74769 = FACE_BOUND('',#74770,.T.); +#74770 = EDGE_LOOP('',(#74771,#74779,#74787,#74795,#74801,#74802,#74803, + #74804,#74805,#74806,#74807,#74808)); +#74771 = ORIENTED_EDGE('',*,*,#74772,.F.); +#74772 = EDGE_CURVE('',#74773,#70909,#74775,.T.); +#74773 = VERTEX_POINT('',#74774); +#74774 = CARTESIAN_POINT('',(7.145,0.56,1.285)); +#74775 = LINE('',#74776,#74777); +#74776 = CARTESIAN_POINT('',(7.145,0.56,0.19)); +#74777 = VECTOR('',#74778,1.); +#74778 = DIRECTION('',(0.,0.,1.)); +#74779 = ORIENTED_EDGE('',*,*,#74780,.F.); +#74780 = EDGE_CURVE('',#74781,#74773,#74783,.T.); +#74781 = VERTEX_POINT('',#74782); +#74782 = CARTESIAN_POINT('',(6.145,0.56,1.285)); +#74783 = LINE('',#74784,#74785); +#74784 = CARTESIAN_POINT('',(6.145,0.56,1.285)); +#74785 = VECTOR('',#74786,1.); +#74786 = DIRECTION('',(1.,0.,0.)); +#74787 = ORIENTED_EDGE('',*,*,#74788,.F.); +#74788 = EDGE_CURVE('',#74789,#74781,#74791,.T.); +#74789 = VERTEX_POINT('',#74790); +#74790 = CARTESIAN_POINT('',(6.145,0.56,0.19)); +#74791 = LINE('',#74792,#74793); +#74792 = CARTESIAN_POINT('',(6.145,0.56,-1.E-02)); +#74793 = VECTOR('',#74794,1.); +#74794 = DIRECTION('',(0.,0.,1.)); +#74795 = ORIENTED_EDGE('',*,*,#74796,.F.); +#74796 = EDGE_CURVE('',#73200,#74789,#74797,.T.); +#74797 = LINE('',#74798,#74799); +#74798 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#74799 = VECTOR('',#74800,1.); +#74800 = DIRECTION('',(1.,0.,0.)); +#74801 = ORIENTED_EDGE('',*,*,#73207,.T.); +#74802 = ORIENTED_EDGE('',*,*,#73150,.T.); +#74803 = ORIENTED_EDGE('',*,*,#73100,.T.); +#74804 = ORIENTED_EDGE('',*,*,#71384,.T.); +#74805 = ORIENTED_EDGE('',*,*,#73014,.T.); +#74806 = ORIENTED_EDGE('',*,*,#71800,.T.); +#74807 = ORIENTED_EDGE('',*,*,#74752,.F.); +#74808 = ORIENTED_EDGE('',*,*,#70916,.F.); +#74809 = PLANE('',#74810); +#74810 = AXIS2_PLACEMENT_3D('',#74811,#74812,#74813); +#74811 = CARTESIAN_POINT('',(-1.195,0.56,0.19)); +#74812 = DIRECTION('',(0.,1.,0.)); +#74813 = DIRECTION('',(1.,0.,0.)); +#74814 = ADVANCED_FACE('',(#74815),#74840,.T.); +#74815 = FACE_BOUND('',#74816,.T.); +#74816 = EDGE_LOOP('',(#74817,#74825,#74826,#74834)); +#74817 = ORIENTED_EDGE('',*,*,#74818,.T.); +#74818 = EDGE_CURVE('',#74819,#74789,#74821,.T.); +#74819 = VERTEX_POINT('',#74820); +#74820 = CARTESIAN_POINT('',(6.145,0.2,0.19)); +#74821 = LINE('',#74822,#74823); +#74822 = CARTESIAN_POINT('',(6.145,-0.145,0.19)); +#74823 = VECTOR('',#74824,1.); +#74824 = DIRECTION('',(0.,1.,0.)); +#74825 = ORIENTED_EDGE('',*,*,#74788,.T.); +#74826 = ORIENTED_EDGE('',*,*,#74827,.T.); +#74827 = EDGE_CURVE('',#74781,#74828,#74830,.T.); +#74828 = VERTEX_POINT('',#74829); +#74829 = CARTESIAN_POINT('',(6.145,0.2,1.285)); +#74830 = LINE('',#74831,#74832); +#74831 = CARTESIAN_POINT('',(6.145,0.56,1.285)); +#74832 = VECTOR('',#74833,1.); +#74833 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74834 = ORIENTED_EDGE('',*,*,#74835,.F.); +#74835 = EDGE_CURVE('',#74819,#74828,#74836,.T.); +#74836 = LINE('',#74837,#74838); +#74837 = CARTESIAN_POINT('',(6.145,0.2,-1.E-02)); +#74838 = VECTOR('',#74839,1.); +#74839 = DIRECTION('',(0.,0.,1.)); +#74840 = PLANE('',#74841); +#74841 = AXIS2_PLACEMENT_3D('',#74842,#74843,#74844); +#74842 = CARTESIAN_POINT('',(6.145,0.56,-1.E-02)); +#74843 = DIRECTION('',(1.,0.,0.)); +#74844 = DIRECTION('',(0.,-1.,0.)); +#74845 = ADVANCED_FACE('',(#74846),#74871,.T.); +#74846 = FACE_BOUND('',#74847,.T.); +#74847 = EDGE_LOOP('',(#74848,#74856,#74857,#74865)); +#74848 = ORIENTED_EDGE('',*,*,#74849,.T.); +#74849 = EDGE_CURVE('',#74850,#74819,#74852,.T.); +#74850 = VERTEX_POINT('',#74851); +#74851 = CARTESIAN_POINT('',(6.245,0.1,0.19)); +#74852 = LINE('',#74853,#74854); +#74853 = CARTESIAN_POINT('',(5.615,0.73,0.19)); +#74854 = VECTOR('',#74855,1.); +#74855 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#74856 = ORIENTED_EDGE('',*,*,#74835,.T.); +#74857 = ORIENTED_EDGE('',*,*,#74858,.T.); +#74858 = EDGE_CURVE('',#74828,#74859,#74861,.T.); +#74859 = VERTEX_POINT('',#74860); +#74860 = CARTESIAN_POINT('',(6.245,0.1,1.285)); +#74861 = LINE('',#74862,#74863); +#74862 = CARTESIAN_POINT('',(6.145,0.2,1.285)); +#74863 = VECTOR('',#74864,1.); +#74864 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#74865 = ORIENTED_EDGE('',*,*,#74866,.F.); +#74866 = EDGE_CURVE('',#74850,#74859,#74867,.T.); +#74867 = LINE('',#74868,#74869); +#74868 = CARTESIAN_POINT('',(6.245,0.1,-1.E-02)); +#74869 = VECTOR('',#74870,1.); +#74870 = DIRECTION('',(0.,0.,1.)); +#74871 = PLANE('',#74872); +#74872 = AXIS2_PLACEMENT_3D('',#74873,#74874,#74875); +#74873 = CARTESIAN_POINT('',(6.145,0.2,-1.E-02)); +#74874 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#74875 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#74876 = ADVANCED_FACE('',(#74877),#74902,.T.); +#74877 = FACE_BOUND('',#74878,.T.); +#74878 = EDGE_LOOP('',(#74879,#74887,#74888,#74896)); +#74879 = ORIENTED_EDGE('',*,*,#74880,.T.); +#74880 = EDGE_CURVE('',#74881,#74850,#74883,.T.); +#74881 = VERTEX_POINT('',#74882); +#74882 = CARTESIAN_POINT('',(6.945,0.1,0.19)); +#74883 = LINE('',#74884,#74885); +#74884 = CARTESIAN_POINT('',(4.61,0.1,0.19)); +#74885 = VECTOR('',#74886,1.); +#74886 = DIRECTION('',(-1.,0.,0.)); +#74887 = ORIENTED_EDGE('',*,*,#74866,.T.); +#74888 = ORIENTED_EDGE('',*,*,#74889,.T.); +#74889 = EDGE_CURVE('',#74859,#74890,#74892,.T.); +#74890 = VERTEX_POINT('',#74891); +#74891 = CARTESIAN_POINT('',(6.945,0.1,1.285)); +#74892 = LINE('',#74893,#74894); +#74893 = CARTESIAN_POINT('',(6.245,0.1,1.285)); +#74894 = VECTOR('',#74895,1.); +#74895 = DIRECTION('',(1.,0.,0.)); +#74896 = ORIENTED_EDGE('',*,*,#74897,.F.); +#74897 = EDGE_CURVE('',#74881,#74890,#74898,.T.); +#74898 = LINE('',#74899,#74900); +#74899 = CARTESIAN_POINT('',(6.945,0.1,-1.E-02)); +#74900 = VECTOR('',#74901,1.); +#74901 = DIRECTION('',(0.,0.,1.)); +#74902 = PLANE('',#74903); +#74903 = AXIS2_PLACEMENT_3D('',#74904,#74905,#74906); +#74904 = CARTESIAN_POINT('',(6.245,0.1,-1.E-02)); +#74905 = DIRECTION('',(0.,1.,0.)); +#74906 = DIRECTION('',(1.,0.,0.)); +#74907 = ADVANCED_FACE('',(#74908),#74926,.F.); +#74908 = FACE_BOUND('',#74909,.T.); +#74909 = EDGE_LOOP('',(#74910,#74911,#74917,#74923,#74924,#74925)); +#74910 = ORIENTED_EDGE('',*,*,#74780,.T.); +#74911 = ORIENTED_EDGE('',*,*,#74912,.T.); +#74912 = EDGE_CURVE('',#74773,#70885,#74913,.T.); +#74913 = LINE('',#74914,#74915); +#74914 = CARTESIAN_POINT('',(7.145,0.56,1.285)); +#74915 = VECTOR('',#74916,1.); +#74916 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74917 = ORIENTED_EDGE('',*,*,#74918,.F.); +#74918 = EDGE_CURVE('',#74890,#70885,#74919,.T.); +#74919 = LINE('',#74920,#74921); +#74920 = CARTESIAN_POINT('',(6.945,0.1,1.285)); +#74921 = VECTOR('',#74922,1.); +#74922 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.599999999999E-16)); +#74923 = ORIENTED_EDGE('',*,*,#74889,.F.); +#74924 = ORIENTED_EDGE('',*,*,#74858,.F.); +#74925 = ORIENTED_EDGE('',*,*,#74827,.F.); +#74926 = PLANE('',#74927); +#74927 = AXIS2_PLACEMENT_3D('',#74928,#74929,#74930); +#74928 = CARTESIAN_POINT('',(6.697316685586,0.29889766982,1.285)); +#74929 = DIRECTION('',(0.,-2.2E-16,1.)); +#74930 = DIRECTION('',(1.,0.,0.)); +#74931 = ADVANCED_FACE('',(#74932),#74957,.F.); +#74932 = FACE_BOUND('',#74933,.F.); +#74933 = EDGE_LOOP('',(#74934,#74935,#74943,#74951)); +#74934 = ORIENTED_EDGE('',*,*,#74772,.F.); +#74935 = ORIENTED_EDGE('',*,*,#74936,.T.); +#74936 = EDGE_CURVE('',#74773,#74937,#74939,.T.); +#74937 = VERTEX_POINT('',#74938); +#74938 = CARTESIAN_POINT('',(7.445,0.56,1.285)); +#74939 = LINE('',#74940,#74941); +#74940 = CARTESIAN_POINT('',(7.145,0.56,1.285)); +#74941 = VECTOR('',#74942,1.); +#74942 = DIRECTION('',(1.,0.,0.)); +#74943 = ORIENTED_EDGE('',*,*,#74944,.F.); +#74944 = EDGE_CURVE('',#74945,#74937,#74947,.T.); +#74945 = VERTEX_POINT('',#74946); +#74946 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74947 = LINE('',#74948,#74949); +#74948 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74949 = VECTOR('',#74950,1.); +#74950 = DIRECTION('',(0.,0.,-1.)); +#74951 = ORIENTED_EDGE('',*,*,#74952,.F.); +#74952 = EDGE_CURVE('',#70909,#74945,#74953,.T.); +#74953 = LINE('',#74954,#74955); +#74954 = CARTESIAN_POINT('',(7.145,0.56,1.87)); +#74955 = VECTOR('',#74956,1.); +#74956 = DIRECTION('',(1.,0.,0.)); +#74957 = PLANE('',#74958); +#74958 = AXIS2_PLACEMENT_3D('',#74959,#74960,#74961); +#74959 = CARTESIAN_POINT('',(7.145,0.56,1.87)); +#74960 = DIRECTION('',(0.,-1.,0.)); +#74961 = DIRECTION('',(1.,0.,0.)); +#74962 = ADVANCED_FACE('',(#74963),#74988,.F.); +#74963 = FACE_BOUND('',#74964,.F.); +#74964 = EDGE_LOOP('',(#74965,#74966,#74974,#74982)); +#74965 = ORIENTED_EDGE('',*,*,#74944,.T.); +#74966 = ORIENTED_EDGE('',*,*,#74967,.T.); +#74967 = EDGE_CURVE('',#74937,#74968,#74970,.T.); +#74968 = VERTEX_POINT('',#74969); +#74969 = CARTESIAN_POINT('',(7.445,-0.63,1.285)); +#74970 = LINE('',#74971,#74972); +#74971 = CARTESIAN_POINT('',(7.445,0.56,1.285)); +#74972 = VECTOR('',#74973,1.); +#74973 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74974 = ORIENTED_EDGE('',*,*,#74975,.F.); +#74975 = EDGE_CURVE('',#74976,#74968,#74978,.T.); +#74976 = VERTEX_POINT('',#74977); +#74977 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#74978 = LINE('',#74979,#74980); +#74979 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#74980 = VECTOR('',#74981,1.); +#74981 = DIRECTION('',(0.,0.,-1.)); +#74982 = ORIENTED_EDGE('',*,*,#74983,.F.); +#74983 = EDGE_CURVE('',#74945,#74976,#74984,.T.); +#74984 = LINE('',#74985,#74986); +#74985 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74986 = VECTOR('',#74987,1.); +#74987 = DIRECTION('',(0.,-1.,-2.2E-16)); +#74988 = PLANE('',#74989); +#74989 = AXIS2_PLACEMENT_3D('',#74990,#74991,#74992); +#74990 = CARTESIAN_POINT('',(7.445,0.56,1.87)); +#74991 = DIRECTION('',(-1.,0.,0.)); +#74992 = DIRECTION('',(0.,-1.,0.)); +#74993 = ADVANCED_FACE('',(#74994),#75005,.T.); +#74994 = FACE_BOUND('',#74995,.F.); +#74995 = EDGE_LOOP('',(#74996,#74997,#74998,#75004)); +#74996 = ORIENTED_EDGE('',*,*,#74952,.T.); +#74997 = ORIENTED_EDGE('',*,*,#74983,.T.); +#74998 = ORIENTED_EDGE('',*,*,#74999,.T.); +#74999 = EDGE_CURVE('',#74976,#70901,#75000,.T.); +#75000 = LINE('',#75001,#75002); +#75001 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#75002 = VECTOR('',#75003,1.); +#75003 = DIRECTION('',(-1.,0.,0.)); +#75004 = ORIENTED_EDGE('',*,*,#70908,.T.); +#75005 = PLANE('',#75006); +#75006 = AXIS2_PLACEMENT_3D('',#75007,#75008,#75009); +#75007 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.87)); +#75008 = DIRECTION('',(0.,-2.2E-16,1.)); +#75009 = DIRECTION('',(1.,0.,0.)); +#75010 = ADVANCED_FACE('',(#75011),#75022,.F.); +#75011 = FACE_BOUND('',#75012,.F.); +#75012 = EDGE_LOOP('',(#75013,#75014,#75020,#75021)); +#75013 = ORIENTED_EDGE('',*,*,#74975,.T.); +#75014 = ORIENTED_EDGE('',*,*,#75015,.T.); +#75015 = EDGE_CURVE('',#74968,#70893,#75016,.T.); +#75016 = LINE('',#75017,#75018); +#75017 = CARTESIAN_POINT('',(7.445,-0.63,1.285)); +#75018 = VECTOR('',#75019,1.); +#75019 = DIRECTION('',(-1.,0.,0.)); +#75020 = ORIENTED_EDGE('',*,*,#70900,.F.); +#75021 = ORIENTED_EDGE('',*,*,#74999,.F.); +#75022 = PLANE('',#75023); +#75023 = AXIS2_PLACEMENT_3D('',#75024,#75025,#75026); +#75024 = CARTESIAN_POINT('',(7.445,-0.63,1.87)); +#75025 = DIRECTION('',(0.,1.,0.)); +#75026 = DIRECTION('',(-1.,0.,0.)); +#75027 = ADVANCED_FACE('',(#75028),#75035,.F.); +#75028 = FACE_BOUND('',#75029,.T.); +#75029 = EDGE_LOOP('',(#75030,#75031,#75032,#75033,#75034)); +#75030 = ORIENTED_EDGE('',*,*,#74936,.T.); +#75031 = ORIENTED_EDGE('',*,*,#74967,.T.); +#75032 = ORIENTED_EDGE('',*,*,#75015,.T.); +#75033 = ORIENTED_EDGE('',*,*,#70892,.T.); +#75034 = ORIENTED_EDGE('',*,*,#74912,.F.); +#75035 = PLANE('',#75036); +#75036 = AXIS2_PLACEMENT_3D('',#75037,#75038,#75039); +#75037 = CARTESIAN_POINT('',(2.975,-3.5E-02,1.285)); +#75038 = DIRECTION('',(0.,-2.2E-16,1.)); +#75039 = DIRECTION('',(1.,0.,0.)); +#75040 = ADVANCED_FACE('',(#75041),#75052,.T.); +#75041 = FACE_BOUND('',#75042,.T.); +#75042 = EDGE_LOOP('',(#75043,#75049,#75050,#75051)); +#75043 = ORIENTED_EDGE('',*,*,#75044,.T.); +#75044 = EDGE_CURVE('',#70877,#74881,#75045,.T.); +#75045 = LINE('',#75046,#75047); +#75046 = CARTESIAN_POINT('',(6.19,0.855,0.19)); +#75047 = VECTOR('',#75048,1.); +#75048 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#75049 = ORIENTED_EDGE('',*,*,#74897,.T.); +#75050 = ORIENTED_EDGE('',*,*,#74918,.T.); +#75051 = ORIENTED_EDGE('',*,*,#70884,.F.); +#75052 = PLANE('',#75053); +#75053 = AXIS2_PLACEMENT_3D('',#75054,#75055,#75056); +#75054 = CARTESIAN_POINT('',(6.945,0.1,-1.E-02)); +#75055 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#75056 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#75057 = ADVANCED_FACE('',(#75058,#75111,#75145),#75179,.F.); +#75058 = FACE_BOUND('',#75059,.F.); +#75059 = EDGE_LOOP('',(#75060,#75061,#75062,#75063,#75064,#75065,#75066, + #75067,#75068,#75069,#75070,#75071,#75072,#75073,#75074,#75075, + #75076,#75077,#75078,#75079,#75080,#75081,#75082,#75083,#75084, + #75085,#75086,#75087,#75088,#75089,#75090,#75091,#75092,#75093, + #75094,#75100,#75101,#75102,#75103,#75104,#75105,#75106,#75107, + #75108,#75109,#75110)); +#75060 = ORIENTED_EDGE('',*,*,#71311,.F.); +#75061 = ORIENTED_EDGE('',*,*,#71147,.T.); +#75062 = ORIENTED_EDGE('',*,*,#71212,.F.); +#75063 = ORIENTED_EDGE('',*,*,#71297,.F.); +#75064 = ORIENTED_EDGE('',*,*,#71280,.F.); +#75065 = ORIENTED_EDGE('',*,*,#73305,.T.); +#75066 = ORIENTED_EDGE('',*,*,#73354,.F.); +#75067 = ORIENTED_EDGE('',*,*,#73439,.F.); +#75068 = ORIENTED_EDGE('',*,*,#73422,.F.); +#75069 = ORIENTED_EDGE('',*,*,#73465,.T.); +#75070 = ORIENTED_EDGE('',*,*,#73514,.F.); +#75071 = ORIENTED_EDGE('',*,*,#74254,.F.); +#75072 = ORIENTED_EDGE('',*,*,#73592,.F.); +#75073 = ORIENTED_EDGE('',*,*,#74234,.T.); +#75074 = ORIENTED_EDGE('',*,*,#73678,.F.); +#75075 = ORIENTED_EDGE('',*,*,#74185,.F.); +#75076 = ORIENTED_EDGE('',*,*,#73756,.F.); +#75077 = ORIENTED_EDGE('',*,*,#74148,.T.); +#75078 = ORIENTED_EDGE('',*,*,#73834,.F.); +#75079 = ORIENTED_EDGE('',*,*,#74134,.F.); +#75080 = ORIENTED_EDGE('',*,*,#73912,.F.); +#75081 = ORIENTED_EDGE('',*,*,#74097,.T.); +#75082 = ORIENTED_EDGE('',*,*,#73998,.F.); +#75083 = ORIENTED_EDGE('',*,*,#74083,.F.); +#75084 = ORIENTED_EDGE('',*,*,#74066,.F.); +#75085 = ORIENTED_EDGE('',*,*,#74352,.T.); +#75086 = ORIENTED_EDGE('',*,*,#74401,.F.); +#75087 = ORIENTED_EDGE('',*,*,#74486,.F.); +#75088 = ORIENTED_EDGE('',*,*,#74469,.F.); +#75089 = ORIENTED_EDGE('',*,*,#74512,.T.); +#75090 = ORIENTED_EDGE('',*,*,#74561,.F.); +#75091 = ORIENTED_EDGE('',*,*,#74646,.F.); +#75092 = ORIENTED_EDGE('',*,*,#74629,.F.); +#75093 = ORIENTED_EDGE('',*,*,#74715,.T.); +#75094 = ORIENTED_EDGE('',*,*,#75095,.F.); +#75095 = EDGE_CURVE('',#70867,#74716,#75096,.T.); +#75096 = LINE('',#75097,#75098); +#75097 = CARTESIAN_POINT('',(6.3825,-2.8775,0.19)); +#75098 = VECTOR('',#75099,1.); +#75099 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#75100 = ORIENTED_EDGE('',*,*,#70876,.F.); +#75101 = ORIENTED_EDGE('',*,*,#75044,.T.); +#75102 = ORIENTED_EDGE('',*,*,#74880,.T.); +#75103 = ORIENTED_EDGE('',*,*,#74849,.T.); +#75104 = ORIENTED_EDGE('',*,*,#74818,.T.); +#75105 = ORIENTED_EDGE('',*,*,#74796,.F.); +#75106 = ORIENTED_EDGE('',*,*,#73197,.F.); +#75107 = ORIENTED_EDGE('',*,*,#73228,.F.); +#75108 = ORIENTED_EDGE('',*,*,#73252,.F.); +#75109 = ORIENTED_EDGE('',*,*,#73276,.F.); +#75110 = ORIENTED_EDGE('',*,*,#71344,.T.); +#75111 = FACE_BOUND('',#75112,.F.); +#75112 = EDGE_LOOP('',(#75113,#75123,#75131,#75139)); +#75113 = ORIENTED_EDGE('',*,*,#75114,.F.); +#75114 = EDGE_CURVE('',#75115,#75117,#75119,.T.); +#75115 = VERTEX_POINT('',#75116); +#75116 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75117 = VERTEX_POINT('',#75118); +#75118 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75119 = LINE('',#75120,#75121); +#75120 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75121 = VECTOR('',#75122,1.); +#75122 = DIRECTION('',(-1.,0.,0.)); +#75123 = ORIENTED_EDGE('',*,*,#75124,.F.); +#75124 = EDGE_CURVE('',#75125,#75115,#75127,.T.); +#75125 = VERTEX_POINT('',#75126); +#75126 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75127 = LINE('',#75128,#75129); +#75128 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75129 = VECTOR('',#75130,1.); +#75130 = DIRECTION('',(0.,1.,2.2E-16)); +#75131 = ORIENTED_EDGE('',*,*,#75132,.F.); +#75132 = EDGE_CURVE('',#75133,#75125,#75135,.T.); +#75133 = VERTEX_POINT('',#75134); +#75134 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75135 = LINE('',#75136,#75137); +#75136 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75137 = VECTOR('',#75138,1.); +#75138 = DIRECTION('',(1.,0.,0.)); +#75139 = ORIENTED_EDGE('',*,*,#75140,.F.); +#75140 = EDGE_CURVE('',#75117,#75133,#75141,.T.); +#75141 = LINE('',#75142,#75143); +#75142 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75143 = VECTOR('',#75144,1.); +#75144 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75145 = FACE_BOUND('',#75146,.F.); +#75146 = EDGE_LOOP('',(#75147,#75157,#75165,#75173)); +#75147 = ORIENTED_EDGE('',*,*,#75148,.T.); +#75148 = EDGE_CURVE('',#75149,#75151,#75153,.T.); +#75149 = VERTEX_POINT('',#75150); +#75150 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75151 = VERTEX_POINT('',#75152); +#75152 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75153 = LINE('',#75154,#75155); +#75154 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75155 = VECTOR('',#75156,1.); +#75156 = DIRECTION('',(0.,1.,2.2E-16)); +#75157 = ORIENTED_EDGE('',*,*,#75158,.T.); +#75158 = EDGE_CURVE('',#75151,#75159,#75161,.T.); +#75159 = VERTEX_POINT('',#75160); +#75160 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75161 = LINE('',#75162,#75163); +#75162 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75163 = VECTOR('',#75164,1.); +#75164 = DIRECTION('',(1.,0.,0.)); +#75165 = ORIENTED_EDGE('',*,*,#75166,.T.); +#75166 = EDGE_CURVE('',#75159,#75167,#75169,.T.); +#75167 = VERTEX_POINT('',#75168); +#75168 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75169 = LINE('',#75170,#75171); +#75170 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75171 = VECTOR('',#75172,1.); +#75172 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75173 = ORIENTED_EDGE('',*,*,#75174,.T.); +#75174 = EDGE_CURVE('',#75167,#75149,#75175,.T.); +#75175 = LINE('',#75176,#75177); +#75176 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75177 = VECTOR('',#75178,1.); +#75178 = DIRECTION('',(-1.,0.,0.)); +#75179 = PLANE('',#75180); +#75180 = AXIS2_PLACEMENT_3D('',#75181,#75182,#75183); +#75181 = CARTESIAN_POINT('',(2.975,-0.85,0.19)); +#75182 = DIRECTION('',(0.,-2.2E-16,1.)); +#75183 = DIRECTION('',(1.,0.,0.)); +#75184 = ADVANCED_FACE('',(#75185),#75210,.F.); +#75185 = FACE_BOUND('',#75186,.F.); +#75186 = EDGE_LOOP('',(#75187,#75195,#75203,#75209)); +#75187 = ORIENTED_EDGE('',*,*,#75188,.T.); +#75188 = EDGE_CURVE('',#75167,#75189,#75191,.T.); +#75189 = VERTEX_POINT('',#75190); +#75190 = CARTESIAN_POINT('',(6.735,-0.82,-9.999999999998E-03)); +#75191 = LINE('',#75192,#75193); +#75192 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75193 = VECTOR('',#75194,1.); +#75194 = DIRECTION('',(0.,0.,-1.)); +#75195 = ORIENTED_EDGE('',*,*,#75196,.T.); +#75196 = EDGE_CURVE('',#75189,#75197,#75199,.T.); +#75197 = VERTEX_POINT('',#75198); +#75198 = CARTESIAN_POINT('',(6.435,-0.82,-9.999999999998E-03)); +#75199 = LINE('',#75200,#75201); +#75200 = CARTESIAN_POINT('',(6.735,-0.82,-9.999999999998E-03)); +#75201 = VECTOR('',#75202,1.); +#75202 = DIRECTION('',(-1.,0.,0.)); +#75203 = ORIENTED_EDGE('',*,*,#75204,.F.); +#75204 = EDGE_CURVE('',#75149,#75197,#75205,.T.); +#75205 = LINE('',#75206,#75207); +#75206 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75207 = VECTOR('',#75208,1.); +#75208 = DIRECTION('',(0.,0.,-1.)); +#75209 = ORIENTED_EDGE('',*,*,#75174,.F.); +#75210 = PLANE('',#75211); +#75211 = AXIS2_PLACEMENT_3D('',#75212,#75213,#75214); +#75212 = CARTESIAN_POINT('',(6.735,-0.82,0.19)); +#75213 = DIRECTION('',(0.,1.,0.)); +#75214 = DIRECTION('',(-1.,0.,0.)); +#75215 = ADVANCED_FACE('',(#75216),#75241,.F.); +#75216 = FACE_BOUND('',#75217,.T.); +#75217 = EDGE_LOOP('',(#75218,#75228,#75234,#75235)); +#75218 = ORIENTED_EDGE('',*,*,#75219,.T.); +#75219 = EDGE_CURVE('',#75220,#75222,#75224,.T.); +#75220 = VERTEX_POINT('',#75221); +#75221 = CARTESIAN_POINT('',(6.435,-0.42,-9.999999999998E-03)); +#75222 = VERTEX_POINT('',#75223); +#75223 = CARTESIAN_POINT('',(6.735,-0.42,-9.999999999998E-03)); +#75224 = LINE('',#75225,#75226); +#75225 = CARTESIAN_POINT('',(6.435,-0.42,-9.999999999998E-03)); +#75226 = VECTOR('',#75227,1.); +#75227 = DIRECTION('',(1.,0.,0.)); +#75228 = ORIENTED_EDGE('',*,*,#75229,.T.); +#75229 = EDGE_CURVE('',#75222,#75189,#75230,.T.); +#75230 = LINE('',#75231,#75232); +#75231 = CARTESIAN_POINT('',(6.735,-0.42,-9.999999999998E-03)); +#75232 = VECTOR('',#75233,1.); +#75233 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75234 = ORIENTED_EDGE('',*,*,#75196,.T.); +#75235 = ORIENTED_EDGE('',*,*,#75236,.T.); +#75236 = EDGE_CURVE('',#75197,#75220,#75237,.T.); +#75237 = LINE('',#75238,#75239); +#75238 = CARTESIAN_POINT('',(6.435,-0.82,-9.999999999998E-03)); +#75239 = VECTOR('',#75240,1.); +#75240 = DIRECTION('',(0.,1.,2.2E-16)); +#75241 = PLANE('',#75242); +#75242 = AXIS2_PLACEMENT_3D('',#75243,#75244,#75245); +#75243 = CARTESIAN_POINT('',(6.585,-0.62,-9.999999999998E-03)); +#75244 = DIRECTION('',(0.,-2.2E-16,1.)); +#75245 = DIRECTION('',(1.,0.,0.)); +#75246 = ADVANCED_FACE('',(#75247),#75258,.F.); +#75247 = FACE_BOUND('',#75248,.F.); +#75248 = EDGE_LOOP('',(#75249,#75255,#75256,#75257)); +#75249 = ORIENTED_EDGE('',*,*,#75250,.T.); +#75250 = EDGE_CURVE('',#75159,#75222,#75251,.T.); +#75251 = LINE('',#75252,#75253); +#75252 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75253 = VECTOR('',#75254,1.); +#75254 = DIRECTION('',(0.,0.,-1.)); +#75255 = ORIENTED_EDGE('',*,*,#75229,.T.); +#75256 = ORIENTED_EDGE('',*,*,#75188,.F.); +#75257 = ORIENTED_EDGE('',*,*,#75166,.F.); +#75258 = PLANE('',#75259); +#75259 = AXIS2_PLACEMENT_3D('',#75260,#75261,#75262); +#75260 = CARTESIAN_POINT('',(6.735,-0.42,0.19)); +#75261 = DIRECTION('',(-1.,0.,0.)); +#75262 = DIRECTION('',(0.,-1.,0.)); +#75263 = ADVANCED_FACE('',(#75264),#75275,.F.); +#75264 = FACE_BOUND('',#75265,.F.); +#75265 = EDGE_LOOP('',(#75266,#75272,#75273,#75274)); +#75266 = ORIENTED_EDGE('',*,*,#75267,.T.); +#75267 = EDGE_CURVE('',#75151,#75220,#75268,.T.); +#75268 = LINE('',#75269,#75270); +#75269 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75270 = VECTOR('',#75271,1.); +#75271 = DIRECTION('',(0.,0.,-1.)); +#75272 = ORIENTED_EDGE('',*,*,#75219,.T.); +#75273 = ORIENTED_EDGE('',*,*,#75250,.F.); +#75274 = ORIENTED_EDGE('',*,*,#75158,.F.); +#75275 = PLANE('',#75276); +#75276 = AXIS2_PLACEMENT_3D('',#75277,#75278,#75279); +#75277 = CARTESIAN_POINT('',(6.435,-0.42,0.19)); +#75278 = DIRECTION('',(0.,-1.,0.)); +#75279 = DIRECTION('',(1.,0.,0.)); +#75280 = ADVANCED_FACE('',(#75281),#75287,.F.); +#75281 = FACE_BOUND('',#75282,.F.); +#75282 = EDGE_LOOP('',(#75283,#75284,#75285,#75286)); +#75283 = ORIENTED_EDGE('',*,*,#75204,.T.); +#75284 = ORIENTED_EDGE('',*,*,#75236,.T.); +#75285 = ORIENTED_EDGE('',*,*,#75267,.F.); +#75286 = ORIENTED_EDGE('',*,*,#75148,.F.); +#75287 = PLANE('',#75288); +#75288 = AXIS2_PLACEMENT_3D('',#75289,#75290,#75291); +#75289 = CARTESIAN_POINT('',(6.435,-0.82,0.19)); +#75290 = DIRECTION('',(1.,0.,0.)); +#75291 = DIRECTION('',(-0.,1.,0.)); +#75292 = ADVANCED_FACE('',(#75293),#75318,.F.); +#75293 = FACE_BOUND('',#75294,.T.); +#75294 = EDGE_LOOP('',(#75295,#75303,#75311,#75317)); +#75295 = ORIENTED_EDGE('',*,*,#75296,.T.); +#75296 = EDGE_CURVE('',#75117,#75297,#75299,.T.); +#75297 = VERTEX_POINT('',#75298); +#75298 = CARTESIAN_POINT('',(-0.785,-0.42,-9.999999999998E-03)); +#75299 = LINE('',#75300,#75301); +#75300 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75301 = VECTOR('',#75302,1.); +#75302 = DIRECTION('',(0.,0.,-1.)); +#75303 = ORIENTED_EDGE('',*,*,#75304,.T.); +#75304 = EDGE_CURVE('',#75297,#75305,#75307,.T.); +#75305 = VERTEX_POINT('',#75306); +#75306 = CARTESIAN_POINT('',(-0.785,-0.82,-9.999999999998E-03)); +#75307 = LINE('',#75308,#75309); +#75308 = CARTESIAN_POINT('',(-0.785,-0.42,-9.999999999998E-03)); +#75309 = VECTOR('',#75310,1.); +#75310 = DIRECTION('',(0.,-1.,-2.2E-16)); +#75311 = ORIENTED_EDGE('',*,*,#75312,.F.); +#75312 = EDGE_CURVE('',#75133,#75305,#75313,.T.); +#75313 = LINE('',#75314,#75315); +#75314 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75315 = VECTOR('',#75316,1.); +#75316 = DIRECTION('',(0.,0.,-1.)); +#75317 = ORIENTED_EDGE('',*,*,#75140,.F.); +#75318 = PLANE('',#75319); +#75319 = AXIS2_PLACEMENT_3D('',#75320,#75321,#75322); +#75320 = CARTESIAN_POINT('',(-0.785,-0.42,0.19)); +#75321 = DIRECTION('',(1.,0.,0.)); +#75322 = DIRECTION('',(-0.,1.,0.)); +#75323 = ADVANCED_FACE('',(#75324),#75349,.F.); +#75324 = FACE_BOUND('',#75325,.F.); +#75325 = EDGE_LOOP('',(#75326,#75334,#75335,#75343)); +#75326 = ORIENTED_EDGE('',*,*,#75327,.T.); +#75327 = EDGE_CURVE('',#75328,#75297,#75330,.T.); +#75328 = VERTEX_POINT('',#75329); +#75329 = CARTESIAN_POINT('',(-0.485,-0.42,-9.999999999998E-03)); +#75330 = LINE('',#75331,#75332); +#75331 = CARTESIAN_POINT('',(-0.485,-0.42,-9.999999999998E-03)); +#75332 = VECTOR('',#75333,1.); +#75333 = DIRECTION('',(-1.,0.,0.)); +#75334 = ORIENTED_EDGE('',*,*,#75304,.T.); +#75335 = ORIENTED_EDGE('',*,*,#75336,.T.); +#75336 = EDGE_CURVE('',#75305,#75337,#75339,.T.); +#75337 = VERTEX_POINT('',#75338); +#75338 = CARTESIAN_POINT('',(-0.485,-0.82,-9.999999999998E-03)); +#75339 = LINE('',#75340,#75341); +#75340 = CARTESIAN_POINT('',(-0.785,-0.82,-9.999999999998E-03)); +#75341 = VECTOR('',#75342,1.); +#75342 = DIRECTION('',(1.,0.,0.)); +#75343 = ORIENTED_EDGE('',*,*,#75344,.T.); +#75344 = EDGE_CURVE('',#75337,#75328,#75345,.T.); +#75345 = LINE('',#75346,#75347); +#75346 = CARTESIAN_POINT('',(-0.485,-0.82,-9.999999999998E-03)); +#75347 = VECTOR('',#75348,1.); +#75348 = DIRECTION('',(0.,1.,2.2E-16)); +#75349 = PLANE('',#75350); +#75350 = AXIS2_PLACEMENT_3D('',#75351,#75352,#75353); +#75351 = CARTESIAN_POINT('',(-0.635,-0.62,-9.999999999998E-03)); +#75352 = DIRECTION('',(0.,-2.2E-16,1.)); +#75353 = DIRECTION('',(1.,0.,0.)); +#75354 = ADVANCED_FACE('',(#75355),#75366,.F.); +#75355 = FACE_BOUND('',#75356,.T.); +#75356 = EDGE_LOOP('',(#75357,#75358,#75359,#75365)); +#75357 = ORIENTED_EDGE('',*,*,#75312,.T.); +#75358 = ORIENTED_EDGE('',*,*,#75336,.T.); +#75359 = ORIENTED_EDGE('',*,*,#75360,.F.); +#75360 = EDGE_CURVE('',#75125,#75337,#75361,.T.); +#75361 = LINE('',#75362,#75363); +#75362 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75363 = VECTOR('',#75364,1.); +#75364 = DIRECTION('',(0.,0.,-1.)); +#75365 = ORIENTED_EDGE('',*,*,#75132,.F.); +#75366 = PLANE('',#75367); +#75367 = AXIS2_PLACEMENT_3D('',#75368,#75369,#75370); +#75368 = CARTESIAN_POINT('',(-0.785,-0.82,0.19)); +#75369 = DIRECTION('',(0.,1.,0.)); +#75370 = DIRECTION('',(-1.,0.,0.)); +#75371 = ADVANCED_FACE('',(#75372),#75383,.F.); +#75372 = FACE_BOUND('',#75373,.T.); +#75373 = EDGE_LOOP('',(#75374,#75375,#75376,#75382)); +#75374 = ORIENTED_EDGE('',*,*,#75360,.T.); +#75375 = ORIENTED_EDGE('',*,*,#75344,.T.); +#75376 = ORIENTED_EDGE('',*,*,#75377,.F.); +#75377 = EDGE_CURVE('',#75115,#75328,#75378,.T.); +#75378 = LINE('',#75379,#75380); +#75379 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75380 = VECTOR('',#75381,1.); +#75381 = DIRECTION('',(0.,0.,-1.)); +#75382 = ORIENTED_EDGE('',*,*,#75124,.F.); +#75383 = PLANE('',#75384); +#75384 = AXIS2_PLACEMENT_3D('',#75385,#75386,#75387); +#75385 = CARTESIAN_POINT('',(-0.485,-0.82,0.19)); +#75386 = DIRECTION('',(-1.,0.,0.)); +#75387 = DIRECTION('',(0.,-1.,0.)); +#75388 = ADVANCED_FACE('',(#75389),#75395,.F.); +#75389 = FACE_BOUND('',#75390,.T.); +#75390 = EDGE_LOOP('',(#75391,#75392,#75393,#75394)); +#75391 = ORIENTED_EDGE('',*,*,#75377,.T.); +#75392 = ORIENTED_EDGE('',*,*,#75327,.T.); +#75393 = ORIENTED_EDGE('',*,*,#75296,.F.); +#75394 = ORIENTED_EDGE('',*,*,#75114,.F.); +#75395 = PLANE('',#75396); +#75396 = AXIS2_PLACEMENT_3D('',#75397,#75398,#75399); +#75397 = CARTESIAN_POINT('',(-0.485,-0.42,0.19)); +#75398 = DIRECTION('',(0.,-1.,0.)); +#75399 = DIRECTION('',(1.,0.,0.)); +#75400 = ADVANCED_FACE('',(#75401),#75407,.F.); +#75401 = FACE_BOUND('',#75402,.T.); +#75402 = EDGE_LOOP('',(#75403,#75404,#75405,#75406)); +#75403 = ORIENTED_EDGE('',*,*,#75095,.F.); +#75404 = ORIENTED_EDGE('',*,*,#70866,.T.); +#75405 = ORIENTED_EDGE('',*,*,#70965,.T.); +#75406 = ORIENTED_EDGE('',*,*,#74726,.F.); +#75407 = PLANE('',#75408); +#75408 = AXIS2_PLACEMENT_3D('',#75409,#75410,#75411); +#75409 = CARTESIAN_POINT('',(7.0725,-2.1875,0.19)); +#75410 = DIRECTION('',(-0.707106781187,0.707106781187,2.999999999998E-17 + )); +#75411 = DIRECTION('',(-2.121320343558E-17,2.121320343558E-17,-1.)); +#75412 = MANIFOLD_SOLID_BREP('',#75413); +#75413 = CLOSED_SHELL('',(#75414,#75454,#75485,#75516,#75538,#75550)); +#75414 = ADVANCED_FACE('',(#75415),#75449,.F.); +#75415 = FACE_BOUND('',#75416,.F.); +#75416 = EDGE_LOOP('',(#75417,#75427,#75435,#75443)); +#75417 = ORIENTED_EDGE('',*,*,#75418,.T.); +#75418 = EDGE_CURVE('',#75419,#75421,#75423,.T.); +#75419 = VERTEX_POINT('',#75420); +#75420 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75421 = VERTEX_POINT('',#75422); +#75422 = CARTESIAN_POINT('',(0.4,-5.6792,2.219)); +#75423 = LINE('',#75424,#75425); +#75424 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75425 = VECTOR('',#75426,1.); +#75426 = DIRECTION('',(0.,0.,1.)); +#75427 = ORIENTED_EDGE('',*,*,#75428,.T.); +#75428 = EDGE_CURVE('',#75421,#75429,#75431,.T.); +#75429 = VERTEX_POINT('',#75430); +#75430 = CARTESIAN_POINT('',(0.15,-5.6792,2.219)); +#75431 = LINE('',#75432,#75433); +#75432 = CARTESIAN_POINT('',(0.4,-5.6792,2.219)); +#75433 = VECTOR('',#75434,1.); +#75434 = DIRECTION('',(-1.,0.,0.)); +#75435 = ORIENTED_EDGE('',*,*,#75436,.F.); +#75436 = EDGE_CURVE('',#75437,#75429,#75439,.T.); +#75437 = VERTEX_POINT('',#75438); +#75438 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75439 = LINE('',#75440,#75441); +#75440 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75441 = VECTOR('',#75442,1.); +#75442 = DIRECTION('',(0.,0.,1.)); +#75443 = ORIENTED_EDGE('',*,*,#75444,.F.); +#75444 = EDGE_CURVE('',#75419,#75437,#75445,.T.); +#75445 = LINE('',#75446,#75447); +#75446 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75447 = VECTOR('',#75448,1.); +#75448 = DIRECTION('',(-1.,0.,0.)); +#75449 = PLANE('',#75450); +#75450 = AXIS2_PLACEMENT_3D('',#75451,#75452,#75453); +#75451 = CARTESIAN_POINT('',(0.4,-5.6792,2.17)); +#75452 = DIRECTION('',(0.,-1.,0.)); +#75453 = DIRECTION('',(-1.,0.,0.)); +#75454 = ADVANCED_FACE('',(#75455),#75480,.F.); +#75455 = FACE_BOUND('',#75456,.F.); +#75456 = EDGE_LOOP('',(#75457,#75458,#75466,#75474)); +#75457 = ORIENTED_EDGE('',*,*,#75436,.T.); +#75458 = ORIENTED_EDGE('',*,*,#75459,.T.); +#75459 = EDGE_CURVE('',#75429,#75460,#75462,.T.); +#75460 = VERTEX_POINT('',#75461); +#75461 = CARTESIAN_POINT('',(0.15,-8.0392,2.219)); +#75462 = LINE('',#75463,#75464); +#75463 = CARTESIAN_POINT('',(0.15,-5.6792,2.219)); +#75464 = VECTOR('',#75465,1.); +#75465 = DIRECTION('',(0.,-1.,0.)); +#75466 = ORIENTED_EDGE('',*,*,#75467,.F.); +#75467 = EDGE_CURVE('',#75468,#75460,#75470,.T.); +#75468 = VERTEX_POINT('',#75469); +#75469 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75470 = LINE('',#75471,#75472); +#75471 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75472 = VECTOR('',#75473,1.); +#75473 = DIRECTION('',(0.,0.,1.)); +#75474 = ORIENTED_EDGE('',*,*,#75475,.F.); +#75475 = EDGE_CURVE('',#75437,#75468,#75476,.T.); +#75476 = LINE('',#75477,#75478); +#75477 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75478 = VECTOR('',#75479,1.); +#75479 = DIRECTION('',(0.,-1.,0.)); +#75480 = PLANE('',#75481); +#75481 = AXIS2_PLACEMENT_3D('',#75482,#75483,#75484); +#75482 = CARTESIAN_POINT('',(0.15,-5.6792,2.17)); +#75483 = DIRECTION('',(1.,0.,0.)); +#75484 = DIRECTION('',(0.,-1.,0.)); +#75485 = ADVANCED_FACE('',(#75486),#75511,.F.); +#75486 = FACE_BOUND('',#75487,.F.); +#75487 = EDGE_LOOP('',(#75488,#75489,#75497,#75505)); +#75488 = ORIENTED_EDGE('',*,*,#75467,.T.); +#75489 = ORIENTED_EDGE('',*,*,#75490,.T.); +#75490 = EDGE_CURVE('',#75460,#75491,#75493,.T.); +#75491 = VERTEX_POINT('',#75492); +#75492 = CARTESIAN_POINT('',(0.4,-8.0392,2.219)); +#75493 = LINE('',#75494,#75495); +#75494 = CARTESIAN_POINT('',(0.15,-8.0392,2.219)); +#75495 = VECTOR('',#75496,1.); +#75496 = DIRECTION('',(1.,0.,0.)); +#75497 = ORIENTED_EDGE('',*,*,#75498,.F.); +#75498 = EDGE_CURVE('',#75499,#75491,#75501,.T.); +#75499 = VERTEX_POINT('',#75500); +#75500 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75501 = LINE('',#75502,#75503); +#75502 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75503 = VECTOR('',#75504,1.); +#75504 = DIRECTION('',(0.,0.,1.)); +#75505 = ORIENTED_EDGE('',*,*,#75506,.F.); +#75506 = EDGE_CURVE('',#75468,#75499,#75507,.T.); +#75507 = LINE('',#75508,#75509); +#75508 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75509 = VECTOR('',#75510,1.); +#75510 = DIRECTION('',(1.,0.,0.)); +#75511 = PLANE('',#75512); +#75512 = AXIS2_PLACEMENT_3D('',#75513,#75514,#75515); +#75513 = CARTESIAN_POINT('',(0.15,-8.0392,2.17)); +#75514 = DIRECTION('',(0.,1.,0.)); +#75515 = DIRECTION('',(1.,0.,0.)); +#75516 = ADVANCED_FACE('',(#75517),#75533,.F.); +#75517 = FACE_BOUND('',#75518,.F.); +#75518 = EDGE_LOOP('',(#75519,#75520,#75526,#75527)); +#75519 = ORIENTED_EDGE('',*,*,#75498,.T.); +#75520 = ORIENTED_EDGE('',*,*,#75521,.T.); +#75521 = EDGE_CURVE('',#75491,#75421,#75522,.T.); +#75522 = LINE('',#75523,#75524); +#75523 = CARTESIAN_POINT('',(0.4,-8.0392,2.219)); +#75524 = VECTOR('',#75525,1.); +#75525 = DIRECTION('',(0.,1.,0.)); +#75526 = ORIENTED_EDGE('',*,*,#75418,.F.); +#75527 = ORIENTED_EDGE('',*,*,#75528,.F.); +#75528 = EDGE_CURVE('',#75499,#75419,#75529,.T.); +#75529 = LINE('',#75530,#75531); +#75530 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75531 = VECTOR('',#75532,1.); +#75532 = DIRECTION('',(0.,1.,0.)); +#75533 = PLANE('',#75534); +#75534 = AXIS2_PLACEMENT_3D('',#75535,#75536,#75537); +#75535 = CARTESIAN_POINT('',(0.4,-8.0392,2.17)); +#75536 = DIRECTION('',(-1.,0.,0.)); +#75537 = DIRECTION('',(0.,1.,0.)); +#75538 = ADVANCED_FACE('',(#75539),#75545,.F.); +#75539 = FACE_BOUND('',#75540,.F.); +#75540 = EDGE_LOOP('',(#75541,#75542,#75543,#75544)); +#75541 = ORIENTED_EDGE('',*,*,#75444,.T.); +#75542 = ORIENTED_EDGE('',*,*,#75475,.T.); +#75543 = ORIENTED_EDGE('',*,*,#75506,.T.); +#75544 = ORIENTED_EDGE('',*,*,#75528,.T.); +#75545 = PLANE('',#75546); +#75546 = AXIS2_PLACEMENT_3D('',#75547,#75548,#75549); +#75547 = CARTESIAN_POINT('',(0.275,-6.8592,2.17)); +#75548 = DIRECTION('',(0.,0.,1.)); +#75549 = DIRECTION('',(1.,0.,-0.)); +#75550 = ADVANCED_FACE('',(#75551),#75557,.T.); +#75551 = FACE_BOUND('',#75552,.T.); +#75552 = EDGE_LOOP('',(#75553,#75554,#75555,#75556)); +#75553 = ORIENTED_EDGE('',*,*,#75428,.T.); +#75554 = ORIENTED_EDGE('',*,*,#75459,.T.); +#75555 = ORIENTED_EDGE('',*,*,#75490,.T.); +#75556 = ORIENTED_EDGE('',*,*,#75521,.T.); +#75557 = PLANE('',#75558); +#75558 = AXIS2_PLACEMENT_3D('',#75559,#75560,#75561); +#75559 = CARTESIAN_POINT('',(0.275,-6.8592,2.219)); +#75560 = DIRECTION('',(0.,0.,1.)); +#75561 = DIRECTION('',(1.,0.,-0.)); +#75562 = MANIFOLD_SOLID_BREP('',#75563); +#75563 = CLOSED_SHELL('',(#75564,#75604,#75635,#75666,#75688,#75700)); +#75564 = ADVANCED_FACE('',(#75565),#75599,.F.); +#75565 = FACE_BOUND('',#75566,.F.); +#75566 = EDGE_LOOP('',(#75567,#75577,#75585,#75593)); +#75567 = ORIENTED_EDGE('',*,*,#75568,.T.); +#75568 = EDGE_CURVE('',#75569,#75571,#75573,.T.); +#75569 = VERTEX_POINT('',#75570); +#75570 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75571 = VERTEX_POINT('',#75572); +#75572 = CARTESIAN_POINT('',(0.4,-5.6792,1.568)); +#75573 = LINE('',#75574,#75575); +#75574 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75575 = VECTOR('',#75576,1.); +#75576 = DIRECTION('',(0.,0.,1.)); +#75577 = ORIENTED_EDGE('',*,*,#75578,.T.); +#75578 = EDGE_CURVE('',#75571,#75579,#75581,.T.); +#75579 = VERTEX_POINT('',#75580); +#75580 = CARTESIAN_POINT('',(0.15,-5.6792,1.568)); +#75581 = LINE('',#75582,#75583); +#75582 = CARTESIAN_POINT('',(0.4,-5.6792,1.568)); +#75583 = VECTOR('',#75584,1.); +#75584 = DIRECTION('',(-1.,0.,0.)); +#75585 = ORIENTED_EDGE('',*,*,#75586,.F.); +#75586 = EDGE_CURVE('',#75587,#75579,#75589,.T.); +#75587 = VERTEX_POINT('',#75588); +#75588 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75589 = LINE('',#75590,#75591); +#75590 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75591 = VECTOR('',#75592,1.); +#75592 = DIRECTION('',(0.,0.,1.)); +#75593 = ORIENTED_EDGE('',*,*,#75594,.F.); +#75594 = EDGE_CURVE('',#75569,#75587,#75595,.T.); +#75595 = LINE('',#75596,#75597); +#75596 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75597 = VECTOR('',#75598,1.); +#75598 = DIRECTION('',(-1.,0.,0.)); +#75599 = PLANE('',#75600); +#75600 = AXIS2_PLACEMENT_3D('',#75601,#75602,#75603); +#75601 = CARTESIAN_POINT('',(0.4,-5.6792,1.519)); +#75602 = DIRECTION('',(0.,-1.,0.)); +#75603 = DIRECTION('',(-1.,0.,0.)); +#75604 = ADVANCED_FACE('',(#75605),#75630,.F.); +#75605 = FACE_BOUND('',#75606,.F.); +#75606 = EDGE_LOOP('',(#75607,#75608,#75616,#75624)); +#75607 = ORIENTED_EDGE('',*,*,#75586,.T.); +#75608 = ORIENTED_EDGE('',*,*,#75609,.T.); +#75609 = EDGE_CURVE('',#75579,#75610,#75612,.T.); +#75610 = VERTEX_POINT('',#75611); +#75611 = CARTESIAN_POINT('',(0.15,-8.0392,1.568)); +#75612 = LINE('',#75613,#75614); +#75613 = CARTESIAN_POINT('',(0.15,-5.6792,1.568)); +#75614 = VECTOR('',#75615,1.); +#75615 = DIRECTION('',(0.,-1.,0.)); +#75616 = ORIENTED_EDGE('',*,*,#75617,.F.); +#75617 = EDGE_CURVE('',#75618,#75610,#75620,.T.); +#75618 = VERTEX_POINT('',#75619); +#75619 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75620 = LINE('',#75621,#75622); +#75621 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75622 = VECTOR('',#75623,1.); +#75623 = DIRECTION('',(0.,0.,1.)); +#75624 = ORIENTED_EDGE('',*,*,#75625,.F.); +#75625 = EDGE_CURVE('',#75587,#75618,#75626,.T.); +#75626 = LINE('',#75627,#75628); +#75627 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75628 = VECTOR('',#75629,1.); +#75629 = DIRECTION('',(0.,-1.,0.)); +#75630 = PLANE('',#75631); +#75631 = AXIS2_PLACEMENT_3D('',#75632,#75633,#75634); +#75632 = CARTESIAN_POINT('',(0.15,-5.6792,1.519)); +#75633 = DIRECTION('',(1.,0.,0.)); +#75634 = DIRECTION('',(0.,-1.,0.)); +#75635 = ADVANCED_FACE('',(#75636),#75661,.F.); +#75636 = FACE_BOUND('',#75637,.F.); +#75637 = EDGE_LOOP('',(#75638,#75639,#75647,#75655)); +#75638 = ORIENTED_EDGE('',*,*,#75617,.T.); +#75639 = ORIENTED_EDGE('',*,*,#75640,.T.); +#75640 = EDGE_CURVE('',#75610,#75641,#75643,.T.); +#75641 = VERTEX_POINT('',#75642); +#75642 = CARTESIAN_POINT('',(0.4,-8.0392,1.568)); +#75643 = LINE('',#75644,#75645); +#75644 = CARTESIAN_POINT('',(0.15,-8.0392,1.568)); +#75645 = VECTOR('',#75646,1.); +#75646 = DIRECTION('',(1.,0.,0.)); +#75647 = ORIENTED_EDGE('',*,*,#75648,.F.); +#75648 = EDGE_CURVE('',#75649,#75641,#75651,.T.); +#75649 = VERTEX_POINT('',#75650); +#75650 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75651 = LINE('',#75652,#75653); +#75652 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75653 = VECTOR('',#75654,1.); +#75654 = DIRECTION('',(0.,0.,1.)); +#75655 = ORIENTED_EDGE('',*,*,#75656,.F.); +#75656 = EDGE_CURVE('',#75618,#75649,#75657,.T.); +#75657 = LINE('',#75658,#75659); +#75658 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75659 = VECTOR('',#75660,1.); +#75660 = DIRECTION('',(1.,0.,0.)); +#75661 = PLANE('',#75662); +#75662 = AXIS2_PLACEMENT_3D('',#75663,#75664,#75665); +#75663 = CARTESIAN_POINT('',(0.15,-8.0392,1.519)); +#75664 = DIRECTION('',(0.,1.,0.)); +#75665 = DIRECTION('',(1.,0.,0.)); +#75666 = ADVANCED_FACE('',(#75667),#75683,.F.); +#75667 = FACE_BOUND('',#75668,.F.); +#75668 = EDGE_LOOP('',(#75669,#75670,#75676,#75677)); +#75669 = ORIENTED_EDGE('',*,*,#75648,.T.); +#75670 = ORIENTED_EDGE('',*,*,#75671,.T.); +#75671 = EDGE_CURVE('',#75641,#75571,#75672,.T.); +#75672 = LINE('',#75673,#75674); +#75673 = CARTESIAN_POINT('',(0.4,-8.0392,1.568)); +#75674 = VECTOR('',#75675,1.); +#75675 = DIRECTION('',(0.,1.,0.)); +#75676 = ORIENTED_EDGE('',*,*,#75568,.F.); +#75677 = ORIENTED_EDGE('',*,*,#75678,.F.); +#75678 = EDGE_CURVE('',#75649,#75569,#75679,.T.); +#75679 = LINE('',#75680,#75681); +#75680 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75681 = VECTOR('',#75682,1.); +#75682 = DIRECTION('',(0.,1.,0.)); +#75683 = PLANE('',#75684); +#75684 = AXIS2_PLACEMENT_3D('',#75685,#75686,#75687); +#75685 = CARTESIAN_POINT('',(0.4,-8.0392,1.519)); +#75686 = DIRECTION('',(-1.,0.,0.)); +#75687 = DIRECTION('',(0.,1.,0.)); +#75688 = ADVANCED_FACE('',(#75689),#75695,.F.); +#75689 = FACE_BOUND('',#75690,.F.); +#75690 = EDGE_LOOP('',(#75691,#75692,#75693,#75694)); +#75691 = ORIENTED_EDGE('',*,*,#75594,.T.); +#75692 = ORIENTED_EDGE('',*,*,#75625,.T.); +#75693 = ORIENTED_EDGE('',*,*,#75656,.T.); +#75694 = ORIENTED_EDGE('',*,*,#75678,.T.); +#75695 = PLANE('',#75696); +#75696 = AXIS2_PLACEMENT_3D('',#75697,#75698,#75699); +#75697 = CARTESIAN_POINT('',(0.275,-6.8592,1.519)); +#75698 = DIRECTION('',(0.,0.,1.)); +#75699 = DIRECTION('',(1.,0.,-0.)); +#75700 = ADVANCED_FACE('',(#75701),#75707,.T.); +#75701 = FACE_BOUND('',#75702,.T.); +#75702 = EDGE_LOOP('',(#75703,#75704,#75705,#75706)); +#75703 = ORIENTED_EDGE('',*,*,#75578,.T.); +#75704 = ORIENTED_EDGE('',*,*,#75609,.T.); +#75705 = ORIENTED_EDGE('',*,*,#75640,.T.); +#75706 = ORIENTED_EDGE('',*,*,#75671,.T.); +#75707 = PLANE('',#75708); +#75708 = AXIS2_PLACEMENT_3D('',#75709,#75710,#75711); +#75709 = CARTESIAN_POINT('',(0.275,-6.8592,1.568)); +#75710 = DIRECTION('',(0.,0.,1.)); +#75711 = DIRECTION('',(1.,0.,-0.)); +#75712 = MANIFOLD_SOLID_BREP('',#75713); +#75713 = CLOSED_SHELL('',(#75714,#75754,#75785,#75816,#75838,#75850)); +#75714 = ADVANCED_FACE('',(#75715),#75749,.F.); +#75715 = FACE_BOUND('',#75716,.F.); +#75716 = EDGE_LOOP('',(#75717,#75727,#75735,#75743)); +#75717 = ORIENTED_EDGE('',*,*,#75718,.T.); +#75718 = EDGE_CURVE('',#75719,#75721,#75723,.T.); +#75719 = VERTEX_POINT('',#75720); +#75720 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75721 = VERTEX_POINT('',#75722); +#75722 = CARTESIAN_POINT('',(1.8,-5.6792,2.219)); +#75723 = LINE('',#75724,#75725); +#75724 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75725 = VECTOR('',#75726,1.); +#75726 = DIRECTION('',(0.,0.,1.)); +#75727 = ORIENTED_EDGE('',*,*,#75728,.T.); +#75728 = EDGE_CURVE('',#75721,#75729,#75731,.T.); +#75729 = VERTEX_POINT('',#75730); +#75730 = CARTESIAN_POINT('',(1.55,-5.6792,2.219)); +#75731 = LINE('',#75732,#75733); +#75732 = CARTESIAN_POINT('',(1.8,-5.6792,2.219)); +#75733 = VECTOR('',#75734,1.); +#75734 = DIRECTION('',(-1.,0.,0.)); +#75735 = ORIENTED_EDGE('',*,*,#75736,.F.); +#75736 = EDGE_CURVE('',#75737,#75729,#75739,.T.); +#75737 = VERTEX_POINT('',#75738); +#75738 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75739 = LINE('',#75740,#75741); +#75740 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75741 = VECTOR('',#75742,1.); +#75742 = DIRECTION('',(0.,0.,1.)); +#75743 = ORIENTED_EDGE('',*,*,#75744,.F.); +#75744 = EDGE_CURVE('',#75719,#75737,#75745,.T.); +#75745 = LINE('',#75746,#75747); +#75746 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75747 = VECTOR('',#75748,1.); +#75748 = DIRECTION('',(-1.,0.,0.)); +#75749 = PLANE('',#75750); +#75750 = AXIS2_PLACEMENT_3D('',#75751,#75752,#75753); +#75751 = CARTESIAN_POINT('',(1.8,-5.6792,2.17)); +#75752 = DIRECTION('',(0.,-1.,0.)); +#75753 = DIRECTION('',(-1.,0.,0.)); +#75754 = ADVANCED_FACE('',(#75755),#75780,.F.); +#75755 = FACE_BOUND('',#75756,.F.); +#75756 = EDGE_LOOP('',(#75757,#75758,#75766,#75774)); +#75757 = ORIENTED_EDGE('',*,*,#75736,.T.); +#75758 = ORIENTED_EDGE('',*,*,#75759,.T.); +#75759 = EDGE_CURVE('',#75729,#75760,#75762,.T.); +#75760 = VERTEX_POINT('',#75761); +#75761 = CARTESIAN_POINT('',(1.55,-8.0392,2.219)); +#75762 = LINE('',#75763,#75764); +#75763 = CARTESIAN_POINT('',(1.55,-5.6792,2.219)); +#75764 = VECTOR('',#75765,1.); +#75765 = DIRECTION('',(0.,-1.,0.)); +#75766 = ORIENTED_EDGE('',*,*,#75767,.F.); +#75767 = EDGE_CURVE('',#75768,#75760,#75770,.T.); +#75768 = VERTEX_POINT('',#75769); +#75769 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75770 = LINE('',#75771,#75772); +#75771 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75772 = VECTOR('',#75773,1.); +#75773 = DIRECTION('',(0.,0.,1.)); +#75774 = ORIENTED_EDGE('',*,*,#75775,.F.); +#75775 = EDGE_CURVE('',#75737,#75768,#75776,.T.); +#75776 = LINE('',#75777,#75778); +#75777 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75778 = VECTOR('',#75779,1.); +#75779 = DIRECTION('',(0.,-1.,0.)); +#75780 = PLANE('',#75781); +#75781 = AXIS2_PLACEMENT_3D('',#75782,#75783,#75784); +#75782 = CARTESIAN_POINT('',(1.55,-5.6792,2.17)); +#75783 = DIRECTION('',(1.,0.,0.)); +#75784 = DIRECTION('',(0.,-1.,0.)); +#75785 = ADVANCED_FACE('',(#75786),#75811,.F.); +#75786 = FACE_BOUND('',#75787,.F.); +#75787 = EDGE_LOOP('',(#75788,#75789,#75797,#75805)); +#75788 = ORIENTED_EDGE('',*,*,#75767,.T.); +#75789 = ORIENTED_EDGE('',*,*,#75790,.T.); +#75790 = EDGE_CURVE('',#75760,#75791,#75793,.T.); +#75791 = VERTEX_POINT('',#75792); +#75792 = CARTESIAN_POINT('',(1.8,-8.0392,2.219)); +#75793 = LINE('',#75794,#75795); +#75794 = CARTESIAN_POINT('',(1.55,-8.0392,2.219)); +#75795 = VECTOR('',#75796,1.); +#75796 = DIRECTION('',(1.,0.,0.)); +#75797 = ORIENTED_EDGE('',*,*,#75798,.F.); +#75798 = EDGE_CURVE('',#75799,#75791,#75801,.T.); +#75799 = VERTEX_POINT('',#75800); +#75800 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75801 = LINE('',#75802,#75803); +#75802 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75803 = VECTOR('',#75804,1.); +#75804 = DIRECTION('',(0.,0.,1.)); +#75805 = ORIENTED_EDGE('',*,*,#75806,.F.); +#75806 = EDGE_CURVE('',#75768,#75799,#75807,.T.); +#75807 = LINE('',#75808,#75809); +#75808 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75809 = VECTOR('',#75810,1.); +#75810 = DIRECTION('',(1.,0.,0.)); +#75811 = PLANE('',#75812); +#75812 = AXIS2_PLACEMENT_3D('',#75813,#75814,#75815); +#75813 = CARTESIAN_POINT('',(1.55,-8.0392,2.17)); +#75814 = DIRECTION('',(0.,1.,0.)); +#75815 = DIRECTION('',(1.,0.,0.)); +#75816 = ADVANCED_FACE('',(#75817),#75833,.F.); +#75817 = FACE_BOUND('',#75818,.F.); +#75818 = EDGE_LOOP('',(#75819,#75820,#75826,#75827)); +#75819 = ORIENTED_EDGE('',*,*,#75798,.T.); +#75820 = ORIENTED_EDGE('',*,*,#75821,.T.); +#75821 = EDGE_CURVE('',#75791,#75721,#75822,.T.); +#75822 = LINE('',#75823,#75824); +#75823 = CARTESIAN_POINT('',(1.8,-8.0392,2.219)); +#75824 = VECTOR('',#75825,1.); +#75825 = DIRECTION('',(0.,1.,0.)); +#75826 = ORIENTED_EDGE('',*,*,#75718,.F.); +#75827 = ORIENTED_EDGE('',*,*,#75828,.F.); +#75828 = EDGE_CURVE('',#75799,#75719,#75829,.T.); +#75829 = LINE('',#75830,#75831); +#75830 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75831 = VECTOR('',#75832,1.); +#75832 = DIRECTION('',(0.,1.,0.)); +#75833 = PLANE('',#75834); +#75834 = AXIS2_PLACEMENT_3D('',#75835,#75836,#75837); +#75835 = CARTESIAN_POINT('',(1.8,-8.0392,2.17)); +#75836 = DIRECTION('',(-1.,0.,0.)); +#75837 = DIRECTION('',(0.,1.,0.)); +#75838 = ADVANCED_FACE('',(#75839),#75845,.F.); +#75839 = FACE_BOUND('',#75840,.F.); +#75840 = EDGE_LOOP('',(#75841,#75842,#75843,#75844)); +#75841 = ORIENTED_EDGE('',*,*,#75744,.T.); +#75842 = ORIENTED_EDGE('',*,*,#75775,.T.); +#75843 = ORIENTED_EDGE('',*,*,#75806,.T.); +#75844 = ORIENTED_EDGE('',*,*,#75828,.T.); +#75845 = PLANE('',#75846); +#75846 = AXIS2_PLACEMENT_3D('',#75847,#75848,#75849); +#75847 = CARTESIAN_POINT('',(1.675,-6.8592,2.17)); +#75848 = DIRECTION('',(0.,0.,1.)); +#75849 = DIRECTION('',(1.,0.,-0.)); +#75850 = ADVANCED_FACE('',(#75851),#75857,.T.); +#75851 = FACE_BOUND('',#75852,.T.); +#75852 = EDGE_LOOP('',(#75853,#75854,#75855,#75856)); +#75853 = ORIENTED_EDGE('',*,*,#75728,.T.); +#75854 = ORIENTED_EDGE('',*,*,#75759,.T.); +#75855 = ORIENTED_EDGE('',*,*,#75790,.T.); +#75856 = ORIENTED_EDGE('',*,*,#75821,.T.); +#75857 = PLANE('',#75858); +#75858 = AXIS2_PLACEMENT_3D('',#75859,#75860,#75861); +#75859 = CARTESIAN_POINT('',(1.675,-6.8592,2.219)); +#75860 = DIRECTION('',(0.,0.,1.)); +#75861 = DIRECTION('',(1.,0.,-0.)); +#75862 = MANIFOLD_SOLID_BREP('',#75863); +#75863 = CLOSED_SHELL('',(#75864,#75904,#75935,#75966,#75988,#76000)); +#75864 = ADVANCED_FACE('',(#75865),#75899,.F.); +#75865 = FACE_BOUND('',#75866,.F.); +#75866 = EDGE_LOOP('',(#75867,#75877,#75885,#75893)); +#75867 = ORIENTED_EDGE('',*,*,#75868,.T.); +#75868 = EDGE_CURVE('',#75869,#75871,#75873,.T.); +#75869 = VERTEX_POINT('',#75870); +#75870 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75871 = VERTEX_POINT('',#75872); +#75872 = CARTESIAN_POINT('',(1.8,-5.6792,1.568)); +#75873 = LINE('',#75874,#75875); +#75874 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75875 = VECTOR('',#75876,1.); +#75876 = DIRECTION('',(0.,0.,1.)); +#75877 = ORIENTED_EDGE('',*,*,#75878,.T.); +#75878 = EDGE_CURVE('',#75871,#75879,#75881,.T.); +#75879 = VERTEX_POINT('',#75880); +#75880 = CARTESIAN_POINT('',(1.55,-5.6792,1.568)); +#75881 = LINE('',#75882,#75883); +#75882 = CARTESIAN_POINT('',(1.8,-5.6792,1.568)); +#75883 = VECTOR('',#75884,1.); +#75884 = DIRECTION('',(-1.,0.,0.)); +#75885 = ORIENTED_EDGE('',*,*,#75886,.F.); +#75886 = EDGE_CURVE('',#75887,#75879,#75889,.T.); +#75887 = VERTEX_POINT('',#75888); +#75888 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75889 = LINE('',#75890,#75891); +#75890 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75891 = VECTOR('',#75892,1.); +#75892 = DIRECTION('',(0.,0.,1.)); +#75893 = ORIENTED_EDGE('',*,*,#75894,.F.); +#75894 = EDGE_CURVE('',#75869,#75887,#75895,.T.); +#75895 = LINE('',#75896,#75897); +#75896 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75897 = VECTOR('',#75898,1.); +#75898 = DIRECTION('',(-1.,0.,0.)); +#75899 = PLANE('',#75900); +#75900 = AXIS2_PLACEMENT_3D('',#75901,#75902,#75903); +#75901 = CARTESIAN_POINT('',(1.8,-5.6792,1.519)); +#75902 = DIRECTION('',(0.,-1.,0.)); +#75903 = DIRECTION('',(-1.,0.,0.)); +#75904 = ADVANCED_FACE('',(#75905),#75930,.F.); +#75905 = FACE_BOUND('',#75906,.F.); +#75906 = EDGE_LOOP('',(#75907,#75908,#75916,#75924)); +#75907 = ORIENTED_EDGE('',*,*,#75886,.T.); +#75908 = ORIENTED_EDGE('',*,*,#75909,.T.); +#75909 = EDGE_CURVE('',#75879,#75910,#75912,.T.); +#75910 = VERTEX_POINT('',#75911); +#75911 = CARTESIAN_POINT('',(1.55,-8.0392,1.568)); +#75912 = LINE('',#75913,#75914); +#75913 = CARTESIAN_POINT('',(1.55,-5.6792,1.568)); +#75914 = VECTOR('',#75915,1.); +#75915 = DIRECTION('',(0.,-1.,0.)); +#75916 = ORIENTED_EDGE('',*,*,#75917,.F.); +#75917 = EDGE_CURVE('',#75918,#75910,#75920,.T.); +#75918 = VERTEX_POINT('',#75919); +#75919 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75920 = LINE('',#75921,#75922); +#75921 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75922 = VECTOR('',#75923,1.); +#75923 = DIRECTION('',(0.,0.,1.)); +#75924 = ORIENTED_EDGE('',*,*,#75925,.F.); +#75925 = EDGE_CURVE('',#75887,#75918,#75926,.T.); +#75926 = LINE('',#75927,#75928); +#75927 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75928 = VECTOR('',#75929,1.); +#75929 = DIRECTION('',(0.,-1.,0.)); +#75930 = PLANE('',#75931); +#75931 = AXIS2_PLACEMENT_3D('',#75932,#75933,#75934); +#75932 = CARTESIAN_POINT('',(1.55,-5.6792,1.519)); +#75933 = DIRECTION('',(1.,0.,0.)); +#75934 = DIRECTION('',(0.,-1.,0.)); +#75935 = ADVANCED_FACE('',(#75936),#75961,.F.); +#75936 = FACE_BOUND('',#75937,.F.); +#75937 = EDGE_LOOP('',(#75938,#75939,#75947,#75955)); +#75938 = ORIENTED_EDGE('',*,*,#75917,.T.); +#75939 = ORIENTED_EDGE('',*,*,#75940,.T.); +#75940 = EDGE_CURVE('',#75910,#75941,#75943,.T.); +#75941 = VERTEX_POINT('',#75942); +#75942 = CARTESIAN_POINT('',(1.8,-8.0392,1.568)); +#75943 = LINE('',#75944,#75945); +#75944 = CARTESIAN_POINT('',(1.55,-8.0392,1.568)); +#75945 = VECTOR('',#75946,1.); +#75946 = DIRECTION('',(1.,0.,0.)); +#75947 = ORIENTED_EDGE('',*,*,#75948,.F.); +#75948 = EDGE_CURVE('',#75949,#75941,#75951,.T.); +#75949 = VERTEX_POINT('',#75950); +#75950 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75951 = LINE('',#75952,#75953); +#75952 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75953 = VECTOR('',#75954,1.); +#75954 = DIRECTION('',(0.,0.,1.)); +#75955 = ORIENTED_EDGE('',*,*,#75956,.F.); +#75956 = EDGE_CURVE('',#75918,#75949,#75957,.T.); +#75957 = LINE('',#75958,#75959); +#75958 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75959 = VECTOR('',#75960,1.); +#75960 = DIRECTION('',(1.,0.,0.)); +#75961 = PLANE('',#75962); +#75962 = AXIS2_PLACEMENT_3D('',#75963,#75964,#75965); +#75963 = CARTESIAN_POINT('',(1.55,-8.0392,1.519)); +#75964 = DIRECTION('',(0.,1.,0.)); +#75965 = DIRECTION('',(1.,0.,0.)); +#75966 = ADVANCED_FACE('',(#75967),#75983,.F.); +#75967 = FACE_BOUND('',#75968,.F.); +#75968 = EDGE_LOOP('',(#75969,#75970,#75976,#75977)); +#75969 = ORIENTED_EDGE('',*,*,#75948,.T.); +#75970 = ORIENTED_EDGE('',*,*,#75971,.T.); +#75971 = EDGE_CURVE('',#75941,#75871,#75972,.T.); +#75972 = LINE('',#75973,#75974); +#75973 = CARTESIAN_POINT('',(1.8,-8.0392,1.568)); +#75974 = VECTOR('',#75975,1.); +#75975 = DIRECTION('',(0.,1.,0.)); +#75976 = ORIENTED_EDGE('',*,*,#75868,.F.); +#75977 = ORIENTED_EDGE('',*,*,#75978,.F.); +#75978 = EDGE_CURVE('',#75949,#75869,#75979,.T.); +#75979 = LINE('',#75980,#75981); +#75980 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75981 = VECTOR('',#75982,1.); +#75982 = DIRECTION('',(0.,1.,0.)); +#75983 = PLANE('',#75984); +#75984 = AXIS2_PLACEMENT_3D('',#75985,#75986,#75987); +#75985 = CARTESIAN_POINT('',(1.8,-8.0392,1.519)); +#75986 = DIRECTION('',(-1.,0.,0.)); +#75987 = DIRECTION('',(0.,1.,0.)); +#75988 = ADVANCED_FACE('',(#75989),#75995,.F.); +#75989 = FACE_BOUND('',#75990,.F.); +#75990 = EDGE_LOOP('',(#75991,#75992,#75993,#75994)); +#75991 = ORIENTED_EDGE('',*,*,#75894,.T.); +#75992 = ORIENTED_EDGE('',*,*,#75925,.T.); +#75993 = ORIENTED_EDGE('',*,*,#75956,.T.); +#75994 = ORIENTED_EDGE('',*,*,#75978,.T.); +#75995 = PLANE('',#75996); +#75996 = AXIS2_PLACEMENT_3D('',#75997,#75998,#75999); +#75997 = CARTESIAN_POINT('',(1.675,-6.8592,1.519)); +#75998 = DIRECTION('',(0.,0.,1.)); +#75999 = DIRECTION('',(1.,0.,-0.)); +#76000 = ADVANCED_FACE('',(#76001),#76007,.T.); +#76001 = FACE_BOUND('',#76002,.T.); +#76002 = EDGE_LOOP('',(#76003,#76004,#76005,#76006)); +#76003 = ORIENTED_EDGE('',*,*,#75878,.T.); +#76004 = ORIENTED_EDGE('',*,*,#75909,.T.); +#76005 = ORIENTED_EDGE('',*,*,#75940,.T.); +#76006 = ORIENTED_EDGE('',*,*,#75971,.T.); +#76007 = PLANE('',#76008); +#76008 = AXIS2_PLACEMENT_3D('',#76009,#76010,#76011); +#76009 = CARTESIAN_POINT('',(1.675,-6.8592,1.568)); +#76010 = DIRECTION('',(0.,0.,1.)); +#76011 = DIRECTION('',(1.,0.,-0.)); +#76012 = MANIFOLD_SOLID_BREP('',#76013); +#76013 = CLOSED_SHELL('',(#76014,#76054,#76085,#76116,#76138,#76150)); +#76014 = ADVANCED_FACE('',(#76015),#76049,.F.); +#76015 = FACE_BOUND('',#76016,.F.); +#76016 = EDGE_LOOP('',(#76017,#76027,#76035,#76043)); +#76017 = ORIENTED_EDGE('',*,*,#76018,.T.); +#76018 = EDGE_CURVE('',#76019,#76021,#76023,.T.); +#76019 = VERTEX_POINT('',#76020); +#76020 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76021 = VERTEX_POINT('',#76022); +#76022 = CARTESIAN_POINT('',(4.4,-5.6792,2.219)); +#76023 = LINE('',#76024,#76025); +#76024 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76025 = VECTOR('',#76026,1.); +#76026 = DIRECTION('',(0.,0.,1.)); +#76027 = ORIENTED_EDGE('',*,*,#76028,.T.); +#76028 = EDGE_CURVE('',#76021,#76029,#76031,.T.); +#76029 = VERTEX_POINT('',#76030); +#76030 = CARTESIAN_POINT('',(4.15,-5.6792,2.219)); +#76031 = LINE('',#76032,#76033); +#76032 = CARTESIAN_POINT('',(4.4,-5.6792,2.219)); +#76033 = VECTOR('',#76034,1.); +#76034 = DIRECTION('',(-1.,0.,0.)); +#76035 = ORIENTED_EDGE('',*,*,#76036,.F.); +#76036 = EDGE_CURVE('',#76037,#76029,#76039,.T.); +#76037 = VERTEX_POINT('',#76038); +#76038 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76039 = LINE('',#76040,#76041); +#76040 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76041 = VECTOR('',#76042,1.); +#76042 = DIRECTION('',(0.,0.,1.)); +#76043 = ORIENTED_EDGE('',*,*,#76044,.F.); +#76044 = EDGE_CURVE('',#76019,#76037,#76045,.T.); +#76045 = LINE('',#76046,#76047); +#76046 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76047 = VECTOR('',#76048,1.); +#76048 = DIRECTION('',(-1.,0.,0.)); +#76049 = PLANE('',#76050); +#76050 = AXIS2_PLACEMENT_3D('',#76051,#76052,#76053); +#76051 = CARTESIAN_POINT('',(4.4,-5.6792,2.17)); +#76052 = DIRECTION('',(0.,-1.,0.)); +#76053 = DIRECTION('',(-1.,0.,0.)); +#76054 = ADVANCED_FACE('',(#76055),#76080,.F.); +#76055 = FACE_BOUND('',#76056,.F.); +#76056 = EDGE_LOOP('',(#76057,#76058,#76066,#76074)); +#76057 = ORIENTED_EDGE('',*,*,#76036,.T.); +#76058 = ORIENTED_EDGE('',*,*,#76059,.T.); +#76059 = EDGE_CURVE('',#76029,#76060,#76062,.T.); +#76060 = VERTEX_POINT('',#76061); +#76061 = CARTESIAN_POINT('',(4.15,-8.0392,2.219)); +#76062 = LINE('',#76063,#76064); +#76063 = CARTESIAN_POINT('',(4.15,-5.6792,2.219)); +#76064 = VECTOR('',#76065,1.); +#76065 = DIRECTION('',(0.,-1.,0.)); +#76066 = ORIENTED_EDGE('',*,*,#76067,.F.); +#76067 = EDGE_CURVE('',#76068,#76060,#76070,.T.); +#76068 = VERTEX_POINT('',#76069); +#76069 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76070 = LINE('',#76071,#76072); +#76071 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76072 = VECTOR('',#76073,1.); +#76073 = DIRECTION('',(0.,0.,1.)); +#76074 = ORIENTED_EDGE('',*,*,#76075,.F.); +#76075 = EDGE_CURVE('',#76037,#76068,#76076,.T.); +#76076 = LINE('',#76077,#76078); +#76077 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76078 = VECTOR('',#76079,1.); +#76079 = DIRECTION('',(0.,-1.,0.)); +#76080 = PLANE('',#76081); +#76081 = AXIS2_PLACEMENT_3D('',#76082,#76083,#76084); +#76082 = CARTESIAN_POINT('',(4.15,-5.6792,2.17)); +#76083 = DIRECTION('',(1.,0.,0.)); +#76084 = DIRECTION('',(0.,-1.,0.)); +#76085 = ADVANCED_FACE('',(#76086),#76111,.F.); +#76086 = FACE_BOUND('',#76087,.F.); +#76087 = EDGE_LOOP('',(#76088,#76089,#76097,#76105)); +#76088 = ORIENTED_EDGE('',*,*,#76067,.T.); +#76089 = ORIENTED_EDGE('',*,*,#76090,.T.); +#76090 = EDGE_CURVE('',#76060,#76091,#76093,.T.); +#76091 = VERTEX_POINT('',#76092); +#76092 = CARTESIAN_POINT('',(4.4,-8.0392,2.219)); +#76093 = LINE('',#76094,#76095); +#76094 = CARTESIAN_POINT('',(4.15,-8.0392,2.219)); +#76095 = VECTOR('',#76096,1.); +#76096 = DIRECTION('',(1.,0.,0.)); +#76097 = ORIENTED_EDGE('',*,*,#76098,.F.); +#76098 = EDGE_CURVE('',#76099,#76091,#76101,.T.); +#76099 = VERTEX_POINT('',#76100); +#76100 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76101 = LINE('',#76102,#76103); +#76102 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76103 = VECTOR('',#76104,1.); +#76104 = DIRECTION('',(0.,0.,1.)); +#76105 = ORIENTED_EDGE('',*,*,#76106,.F.); +#76106 = EDGE_CURVE('',#76068,#76099,#76107,.T.); +#76107 = LINE('',#76108,#76109); +#76108 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76109 = VECTOR('',#76110,1.); +#76110 = DIRECTION('',(1.,0.,0.)); +#76111 = PLANE('',#76112); +#76112 = AXIS2_PLACEMENT_3D('',#76113,#76114,#76115); +#76113 = CARTESIAN_POINT('',(4.15,-8.0392,2.17)); +#76114 = DIRECTION('',(0.,1.,0.)); +#76115 = DIRECTION('',(1.,0.,0.)); +#76116 = ADVANCED_FACE('',(#76117),#76133,.F.); +#76117 = FACE_BOUND('',#76118,.F.); +#76118 = EDGE_LOOP('',(#76119,#76120,#76126,#76127)); +#76119 = ORIENTED_EDGE('',*,*,#76098,.T.); +#76120 = ORIENTED_EDGE('',*,*,#76121,.T.); +#76121 = EDGE_CURVE('',#76091,#76021,#76122,.T.); +#76122 = LINE('',#76123,#76124); +#76123 = CARTESIAN_POINT('',(4.4,-8.0392,2.219)); +#76124 = VECTOR('',#76125,1.); +#76125 = DIRECTION('',(0.,1.,0.)); +#76126 = ORIENTED_EDGE('',*,*,#76018,.F.); +#76127 = ORIENTED_EDGE('',*,*,#76128,.F.); +#76128 = EDGE_CURVE('',#76099,#76019,#76129,.T.); +#76129 = LINE('',#76130,#76131); +#76130 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76131 = VECTOR('',#76132,1.); +#76132 = DIRECTION('',(0.,1.,0.)); +#76133 = PLANE('',#76134); +#76134 = AXIS2_PLACEMENT_3D('',#76135,#76136,#76137); +#76135 = CARTESIAN_POINT('',(4.4,-8.0392,2.17)); +#76136 = DIRECTION('',(-1.,0.,0.)); +#76137 = DIRECTION('',(0.,1.,0.)); +#76138 = ADVANCED_FACE('',(#76139),#76145,.F.); +#76139 = FACE_BOUND('',#76140,.F.); +#76140 = EDGE_LOOP('',(#76141,#76142,#76143,#76144)); +#76141 = ORIENTED_EDGE('',*,*,#76044,.T.); +#76142 = ORIENTED_EDGE('',*,*,#76075,.T.); +#76143 = ORIENTED_EDGE('',*,*,#76106,.T.); +#76144 = ORIENTED_EDGE('',*,*,#76128,.T.); +#76145 = PLANE('',#76146); +#76146 = AXIS2_PLACEMENT_3D('',#76147,#76148,#76149); +#76147 = CARTESIAN_POINT('',(4.275,-6.8592,2.17)); +#76148 = DIRECTION('',(0.,0.,1.)); +#76149 = DIRECTION('',(1.,0.,-0.)); +#76150 = ADVANCED_FACE('',(#76151),#76157,.T.); +#76151 = FACE_BOUND('',#76152,.T.); +#76152 = EDGE_LOOP('',(#76153,#76154,#76155,#76156)); +#76153 = ORIENTED_EDGE('',*,*,#76028,.T.); +#76154 = ORIENTED_EDGE('',*,*,#76059,.T.); +#76155 = ORIENTED_EDGE('',*,*,#76090,.T.); +#76156 = ORIENTED_EDGE('',*,*,#76121,.T.); +#76157 = PLANE('',#76158); +#76158 = AXIS2_PLACEMENT_3D('',#76159,#76160,#76161); +#76159 = CARTESIAN_POINT('',(4.275,-6.8592,2.219)); +#76160 = DIRECTION('',(0.,0.,1.)); +#76161 = DIRECTION('',(1.,0.,-0.)); +#76162 = MANIFOLD_SOLID_BREP('',#76163); +#76163 = CLOSED_SHELL('',(#76164,#76204,#76235,#76266,#76288,#76300)); +#76164 = ADVANCED_FACE('',(#76165),#76199,.F.); +#76165 = FACE_BOUND('',#76166,.F.); +#76166 = EDGE_LOOP('',(#76167,#76177,#76185,#76193)); +#76167 = ORIENTED_EDGE('',*,*,#76168,.T.); +#76168 = EDGE_CURVE('',#76169,#76171,#76173,.T.); +#76169 = VERTEX_POINT('',#76170); +#76170 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76171 = VERTEX_POINT('',#76172); +#76172 = CARTESIAN_POINT('',(4.4,-5.6792,1.568)); +#76173 = LINE('',#76174,#76175); +#76174 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76175 = VECTOR('',#76176,1.); +#76176 = DIRECTION('',(0.,0.,1.)); +#76177 = ORIENTED_EDGE('',*,*,#76178,.T.); +#76178 = EDGE_CURVE('',#76171,#76179,#76181,.T.); +#76179 = VERTEX_POINT('',#76180); +#76180 = CARTESIAN_POINT('',(4.15,-5.6792,1.568)); +#76181 = LINE('',#76182,#76183); +#76182 = CARTESIAN_POINT('',(4.4,-5.6792,1.568)); +#76183 = VECTOR('',#76184,1.); +#76184 = DIRECTION('',(-1.,0.,0.)); +#76185 = ORIENTED_EDGE('',*,*,#76186,.F.); +#76186 = EDGE_CURVE('',#76187,#76179,#76189,.T.); +#76187 = VERTEX_POINT('',#76188); +#76188 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76189 = LINE('',#76190,#76191); +#76190 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76191 = VECTOR('',#76192,1.); +#76192 = DIRECTION('',(0.,0.,1.)); +#76193 = ORIENTED_EDGE('',*,*,#76194,.F.); +#76194 = EDGE_CURVE('',#76169,#76187,#76195,.T.); +#76195 = LINE('',#76196,#76197); +#76196 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76197 = VECTOR('',#76198,1.); +#76198 = DIRECTION('',(-1.,0.,0.)); +#76199 = PLANE('',#76200); +#76200 = AXIS2_PLACEMENT_3D('',#76201,#76202,#76203); +#76201 = CARTESIAN_POINT('',(4.4,-5.6792,1.519)); +#76202 = DIRECTION('',(0.,-1.,0.)); +#76203 = DIRECTION('',(-1.,0.,0.)); +#76204 = ADVANCED_FACE('',(#76205),#76230,.F.); +#76205 = FACE_BOUND('',#76206,.F.); +#76206 = EDGE_LOOP('',(#76207,#76208,#76216,#76224)); +#76207 = ORIENTED_EDGE('',*,*,#76186,.T.); +#76208 = ORIENTED_EDGE('',*,*,#76209,.T.); +#76209 = EDGE_CURVE('',#76179,#76210,#76212,.T.); +#76210 = VERTEX_POINT('',#76211); +#76211 = CARTESIAN_POINT('',(4.15,-8.0392,1.568)); +#76212 = LINE('',#76213,#76214); +#76213 = CARTESIAN_POINT('',(4.15,-5.6792,1.568)); +#76214 = VECTOR('',#76215,1.); +#76215 = DIRECTION('',(0.,-1.,0.)); +#76216 = ORIENTED_EDGE('',*,*,#76217,.F.); +#76217 = EDGE_CURVE('',#76218,#76210,#76220,.T.); +#76218 = VERTEX_POINT('',#76219); +#76219 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76220 = LINE('',#76221,#76222); +#76221 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76222 = VECTOR('',#76223,1.); +#76223 = DIRECTION('',(0.,0.,1.)); +#76224 = ORIENTED_EDGE('',*,*,#76225,.F.); +#76225 = EDGE_CURVE('',#76187,#76218,#76226,.T.); +#76226 = LINE('',#76227,#76228); +#76227 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76228 = VECTOR('',#76229,1.); +#76229 = DIRECTION('',(0.,-1.,0.)); +#76230 = PLANE('',#76231); +#76231 = AXIS2_PLACEMENT_3D('',#76232,#76233,#76234); +#76232 = CARTESIAN_POINT('',(4.15,-5.6792,1.519)); +#76233 = DIRECTION('',(1.,0.,0.)); +#76234 = DIRECTION('',(0.,-1.,0.)); +#76235 = ADVANCED_FACE('',(#76236),#76261,.F.); +#76236 = FACE_BOUND('',#76237,.F.); +#76237 = EDGE_LOOP('',(#76238,#76239,#76247,#76255)); +#76238 = ORIENTED_EDGE('',*,*,#76217,.T.); +#76239 = ORIENTED_EDGE('',*,*,#76240,.T.); +#76240 = EDGE_CURVE('',#76210,#76241,#76243,.T.); +#76241 = VERTEX_POINT('',#76242); +#76242 = CARTESIAN_POINT('',(4.4,-8.0392,1.568)); +#76243 = LINE('',#76244,#76245); +#76244 = CARTESIAN_POINT('',(4.15,-8.0392,1.568)); +#76245 = VECTOR('',#76246,1.); +#76246 = DIRECTION('',(1.,0.,0.)); +#76247 = ORIENTED_EDGE('',*,*,#76248,.F.); +#76248 = EDGE_CURVE('',#76249,#76241,#76251,.T.); +#76249 = VERTEX_POINT('',#76250); +#76250 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76251 = LINE('',#76252,#76253); +#76252 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76253 = VECTOR('',#76254,1.); +#76254 = DIRECTION('',(0.,0.,1.)); +#76255 = ORIENTED_EDGE('',*,*,#76256,.F.); +#76256 = EDGE_CURVE('',#76218,#76249,#76257,.T.); +#76257 = LINE('',#76258,#76259); +#76258 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76259 = VECTOR('',#76260,1.); +#76260 = DIRECTION('',(1.,0.,0.)); +#76261 = PLANE('',#76262); +#76262 = AXIS2_PLACEMENT_3D('',#76263,#76264,#76265); +#76263 = CARTESIAN_POINT('',(4.15,-8.0392,1.519)); +#76264 = DIRECTION('',(0.,1.,0.)); +#76265 = DIRECTION('',(1.,0.,0.)); +#76266 = ADVANCED_FACE('',(#76267),#76283,.F.); +#76267 = FACE_BOUND('',#76268,.F.); +#76268 = EDGE_LOOP('',(#76269,#76270,#76276,#76277)); +#76269 = ORIENTED_EDGE('',*,*,#76248,.T.); +#76270 = ORIENTED_EDGE('',*,*,#76271,.T.); +#76271 = EDGE_CURVE('',#76241,#76171,#76272,.T.); +#76272 = LINE('',#76273,#76274); +#76273 = CARTESIAN_POINT('',(4.4,-8.0392,1.568)); +#76274 = VECTOR('',#76275,1.); +#76275 = DIRECTION('',(0.,1.,0.)); +#76276 = ORIENTED_EDGE('',*,*,#76168,.F.); +#76277 = ORIENTED_EDGE('',*,*,#76278,.F.); +#76278 = EDGE_CURVE('',#76249,#76169,#76279,.T.); +#76279 = LINE('',#76280,#76281); +#76280 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76281 = VECTOR('',#76282,1.); +#76282 = DIRECTION('',(0.,1.,0.)); +#76283 = PLANE('',#76284); +#76284 = AXIS2_PLACEMENT_3D('',#76285,#76286,#76287); +#76285 = CARTESIAN_POINT('',(4.4,-8.0392,1.519)); +#76286 = DIRECTION('',(-1.,0.,0.)); +#76287 = DIRECTION('',(0.,1.,0.)); +#76288 = ADVANCED_FACE('',(#76289),#76295,.F.); +#76289 = FACE_BOUND('',#76290,.F.); +#76290 = EDGE_LOOP('',(#76291,#76292,#76293,#76294)); +#76291 = ORIENTED_EDGE('',*,*,#76194,.T.); +#76292 = ORIENTED_EDGE('',*,*,#76225,.T.); +#76293 = ORIENTED_EDGE('',*,*,#76256,.T.); +#76294 = ORIENTED_EDGE('',*,*,#76278,.T.); +#76295 = PLANE('',#76296); +#76296 = AXIS2_PLACEMENT_3D('',#76297,#76298,#76299); +#76297 = CARTESIAN_POINT('',(4.275,-6.8592,1.519)); +#76298 = DIRECTION('',(0.,0.,1.)); +#76299 = DIRECTION('',(1.,0.,-0.)); +#76300 = ADVANCED_FACE('',(#76301),#76307,.T.); +#76301 = FACE_BOUND('',#76302,.T.); +#76302 = EDGE_LOOP('',(#76303,#76304,#76305,#76306)); +#76303 = ORIENTED_EDGE('',*,*,#76178,.T.); +#76304 = ORIENTED_EDGE('',*,*,#76209,.T.); +#76305 = ORIENTED_EDGE('',*,*,#76240,.T.); +#76306 = ORIENTED_EDGE('',*,*,#76271,.T.); +#76307 = PLANE('',#76308); +#76308 = AXIS2_PLACEMENT_3D('',#76309,#76310,#76311); +#76309 = CARTESIAN_POINT('',(4.275,-6.8592,1.568)); +#76310 = DIRECTION('',(0.,0.,1.)); +#76311 = DIRECTION('',(1.,0.,-0.)); +#76312 = MANIFOLD_SOLID_BREP('',#76313); +#76313 = CLOSED_SHELL('',(#76314,#76354,#76385,#76416,#76438,#76450)); +#76314 = ADVANCED_FACE('',(#76315),#76349,.F.); +#76315 = FACE_BOUND('',#76316,.F.); +#76316 = EDGE_LOOP('',(#76317,#76327,#76335,#76343)); +#76317 = ORIENTED_EDGE('',*,*,#76318,.T.); +#76318 = EDGE_CURVE('',#76319,#76321,#76323,.T.); +#76319 = VERTEX_POINT('',#76320); +#76320 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76321 = VERTEX_POINT('',#76322); +#76322 = CARTESIAN_POINT('',(5.8,-5.6792,2.219)); +#76323 = LINE('',#76324,#76325); +#76324 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76325 = VECTOR('',#76326,1.); +#76326 = DIRECTION('',(0.,0.,1.)); +#76327 = ORIENTED_EDGE('',*,*,#76328,.T.); +#76328 = EDGE_CURVE('',#76321,#76329,#76331,.T.); +#76329 = VERTEX_POINT('',#76330); +#76330 = CARTESIAN_POINT('',(5.55,-5.6792,2.219)); +#76331 = LINE('',#76332,#76333); +#76332 = CARTESIAN_POINT('',(5.8,-5.6792,2.219)); +#76333 = VECTOR('',#76334,1.); +#76334 = DIRECTION('',(-1.,0.,0.)); +#76335 = ORIENTED_EDGE('',*,*,#76336,.F.); +#76336 = EDGE_CURVE('',#76337,#76329,#76339,.T.); +#76337 = VERTEX_POINT('',#76338); +#76338 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76339 = LINE('',#76340,#76341); +#76340 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76341 = VECTOR('',#76342,1.); +#76342 = DIRECTION('',(0.,0.,1.)); +#76343 = ORIENTED_EDGE('',*,*,#76344,.F.); +#76344 = EDGE_CURVE('',#76319,#76337,#76345,.T.); +#76345 = LINE('',#76346,#76347); +#76346 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76347 = VECTOR('',#76348,1.); +#76348 = DIRECTION('',(-1.,0.,0.)); +#76349 = PLANE('',#76350); +#76350 = AXIS2_PLACEMENT_3D('',#76351,#76352,#76353); +#76351 = CARTESIAN_POINT('',(5.8,-5.6792,2.17)); +#76352 = DIRECTION('',(0.,-1.,0.)); +#76353 = DIRECTION('',(-1.,0.,0.)); +#76354 = ADVANCED_FACE('',(#76355),#76380,.F.); +#76355 = FACE_BOUND('',#76356,.F.); +#76356 = EDGE_LOOP('',(#76357,#76358,#76366,#76374)); +#76357 = ORIENTED_EDGE('',*,*,#76336,.T.); +#76358 = ORIENTED_EDGE('',*,*,#76359,.T.); +#76359 = EDGE_CURVE('',#76329,#76360,#76362,.T.); +#76360 = VERTEX_POINT('',#76361); +#76361 = CARTESIAN_POINT('',(5.55,-8.0392,2.219)); +#76362 = LINE('',#76363,#76364); +#76363 = CARTESIAN_POINT('',(5.55,-5.6792,2.219)); +#76364 = VECTOR('',#76365,1.); +#76365 = DIRECTION('',(0.,-1.,0.)); +#76366 = ORIENTED_EDGE('',*,*,#76367,.F.); +#76367 = EDGE_CURVE('',#76368,#76360,#76370,.T.); +#76368 = VERTEX_POINT('',#76369); +#76369 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76370 = LINE('',#76371,#76372); +#76371 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76372 = VECTOR('',#76373,1.); +#76373 = DIRECTION('',(0.,0.,1.)); +#76374 = ORIENTED_EDGE('',*,*,#76375,.F.); +#76375 = EDGE_CURVE('',#76337,#76368,#76376,.T.); +#76376 = LINE('',#76377,#76378); +#76377 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76378 = VECTOR('',#76379,1.); +#76379 = DIRECTION('',(0.,-1.,0.)); +#76380 = PLANE('',#76381); +#76381 = AXIS2_PLACEMENT_3D('',#76382,#76383,#76384); +#76382 = CARTESIAN_POINT('',(5.55,-5.6792,2.17)); +#76383 = DIRECTION('',(1.,0.,0.)); +#76384 = DIRECTION('',(0.,-1.,0.)); +#76385 = ADVANCED_FACE('',(#76386),#76411,.F.); +#76386 = FACE_BOUND('',#76387,.F.); +#76387 = EDGE_LOOP('',(#76388,#76389,#76397,#76405)); +#76388 = ORIENTED_EDGE('',*,*,#76367,.T.); +#76389 = ORIENTED_EDGE('',*,*,#76390,.T.); +#76390 = EDGE_CURVE('',#76360,#76391,#76393,.T.); +#76391 = VERTEX_POINT('',#76392); +#76392 = CARTESIAN_POINT('',(5.8,-8.0392,2.219)); +#76393 = LINE('',#76394,#76395); +#76394 = CARTESIAN_POINT('',(5.55,-8.0392,2.219)); +#76395 = VECTOR('',#76396,1.); +#76396 = DIRECTION('',(1.,0.,0.)); +#76397 = ORIENTED_EDGE('',*,*,#76398,.F.); +#76398 = EDGE_CURVE('',#76399,#76391,#76401,.T.); +#76399 = VERTEX_POINT('',#76400); +#76400 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76401 = LINE('',#76402,#76403); +#76402 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76403 = VECTOR('',#76404,1.); +#76404 = DIRECTION('',(0.,0.,1.)); +#76405 = ORIENTED_EDGE('',*,*,#76406,.F.); +#76406 = EDGE_CURVE('',#76368,#76399,#76407,.T.); +#76407 = LINE('',#76408,#76409); +#76408 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76409 = VECTOR('',#76410,1.); +#76410 = DIRECTION('',(1.,0.,0.)); +#76411 = PLANE('',#76412); +#76412 = AXIS2_PLACEMENT_3D('',#76413,#76414,#76415); +#76413 = CARTESIAN_POINT('',(5.55,-8.0392,2.17)); +#76414 = DIRECTION('',(0.,1.,0.)); +#76415 = DIRECTION('',(1.,0.,0.)); +#76416 = ADVANCED_FACE('',(#76417),#76433,.F.); +#76417 = FACE_BOUND('',#76418,.F.); +#76418 = EDGE_LOOP('',(#76419,#76420,#76426,#76427)); +#76419 = ORIENTED_EDGE('',*,*,#76398,.T.); +#76420 = ORIENTED_EDGE('',*,*,#76421,.T.); +#76421 = EDGE_CURVE('',#76391,#76321,#76422,.T.); +#76422 = LINE('',#76423,#76424); +#76423 = CARTESIAN_POINT('',(5.8,-8.0392,2.219)); +#76424 = VECTOR('',#76425,1.); +#76425 = DIRECTION('',(0.,1.,0.)); +#76426 = ORIENTED_EDGE('',*,*,#76318,.F.); +#76427 = ORIENTED_EDGE('',*,*,#76428,.F.); +#76428 = EDGE_CURVE('',#76399,#76319,#76429,.T.); +#76429 = LINE('',#76430,#76431); +#76430 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76431 = VECTOR('',#76432,1.); +#76432 = DIRECTION('',(0.,1.,0.)); +#76433 = PLANE('',#76434); +#76434 = AXIS2_PLACEMENT_3D('',#76435,#76436,#76437); +#76435 = CARTESIAN_POINT('',(5.8,-8.0392,2.17)); +#76436 = DIRECTION('',(-1.,0.,0.)); +#76437 = DIRECTION('',(0.,1.,0.)); +#76438 = ADVANCED_FACE('',(#76439),#76445,.F.); +#76439 = FACE_BOUND('',#76440,.F.); +#76440 = EDGE_LOOP('',(#76441,#76442,#76443,#76444)); +#76441 = ORIENTED_EDGE('',*,*,#76344,.T.); +#76442 = ORIENTED_EDGE('',*,*,#76375,.T.); +#76443 = ORIENTED_EDGE('',*,*,#76406,.T.); +#76444 = ORIENTED_EDGE('',*,*,#76428,.T.); +#76445 = PLANE('',#76446); +#76446 = AXIS2_PLACEMENT_3D('',#76447,#76448,#76449); +#76447 = CARTESIAN_POINT('',(5.675,-6.8592,2.17)); +#76448 = DIRECTION('',(0.,0.,1.)); +#76449 = DIRECTION('',(1.,0.,-0.)); +#76450 = ADVANCED_FACE('',(#76451),#76457,.T.); +#76451 = FACE_BOUND('',#76452,.T.); +#76452 = EDGE_LOOP('',(#76453,#76454,#76455,#76456)); +#76453 = ORIENTED_EDGE('',*,*,#76328,.T.); +#76454 = ORIENTED_EDGE('',*,*,#76359,.T.); +#76455 = ORIENTED_EDGE('',*,*,#76390,.T.); +#76456 = ORIENTED_EDGE('',*,*,#76421,.T.); +#76457 = PLANE('',#76458); +#76458 = AXIS2_PLACEMENT_3D('',#76459,#76460,#76461); +#76459 = CARTESIAN_POINT('',(5.675,-6.8592,2.219)); +#76460 = DIRECTION('',(0.,0.,1.)); +#76461 = DIRECTION('',(1.,0.,-0.)); +#76462 = MANIFOLD_SOLID_BREP('',#76463); +#76463 = CLOSED_SHELL('',(#76464,#76504,#76535,#76566,#76588,#76600)); +#76464 = ADVANCED_FACE('',(#76465),#76499,.F.); +#76465 = FACE_BOUND('',#76466,.F.); +#76466 = EDGE_LOOP('',(#76467,#76477,#76485,#76493)); +#76467 = ORIENTED_EDGE('',*,*,#76468,.T.); +#76468 = EDGE_CURVE('',#76469,#76471,#76473,.T.); +#76469 = VERTEX_POINT('',#76470); +#76470 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76471 = VERTEX_POINT('',#76472); +#76472 = CARTESIAN_POINT('',(5.8,-5.6792,1.568)); +#76473 = LINE('',#76474,#76475); +#76474 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76475 = VECTOR('',#76476,1.); +#76476 = DIRECTION('',(0.,0.,1.)); +#76477 = ORIENTED_EDGE('',*,*,#76478,.T.); +#76478 = EDGE_CURVE('',#76471,#76479,#76481,.T.); +#76479 = VERTEX_POINT('',#76480); +#76480 = CARTESIAN_POINT('',(5.55,-5.6792,1.568)); +#76481 = LINE('',#76482,#76483); +#76482 = CARTESIAN_POINT('',(5.8,-5.6792,1.568)); +#76483 = VECTOR('',#76484,1.); +#76484 = DIRECTION('',(-1.,0.,0.)); +#76485 = ORIENTED_EDGE('',*,*,#76486,.F.); +#76486 = EDGE_CURVE('',#76487,#76479,#76489,.T.); +#76487 = VERTEX_POINT('',#76488); +#76488 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76489 = LINE('',#76490,#76491); +#76490 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76491 = VECTOR('',#76492,1.); +#76492 = DIRECTION('',(0.,0.,1.)); +#76493 = ORIENTED_EDGE('',*,*,#76494,.F.); +#76494 = EDGE_CURVE('',#76469,#76487,#76495,.T.); +#76495 = LINE('',#76496,#76497); +#76496 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76497 = VECTOR('',#76498,1.); +#76498 = DIRECTION('',(-1.,0.,0.)); +#76499 = PLANE('',#76500); +#76500 = AXIS2_PLACEMENT_3D('',#76501,#76502,#76503); +#76501 = CARTESIAN_POINT('',(5.8,-5.6792,1.519)); +#76502 = DIRECTION('',(0.,-1.,0.)); +#76503 = DIRECTION('',(-1.,0.,0.)); +#76504 = ADVANCED_FACE('',(#76505),#76530,.F.); +#76505 = FACE_BOUND('',#76506,.F.); +#76506 = EDGE_LOOP('',(#76507,#76508,#76516,#76524)); +#76507 = ORIENTED_EDGE('',*,*,#76486,.T.); +#76508 = ORIENTED_EDGE('',*,*,#76509,.T.); +#76509 = EDGE_CURVE('',#76479,#76510,#76512,.T.); +#76510 = VERTEX_POINT('',#76511); +#76511 = CARTESIAN_POINT('',(5.55,-8.0392,1.568)); +#76512 = LINE('',#76513,#76514); +#76513 = CARTESIAN_POINT('',(5.55,-5.6792,1.568)); +#76514 = VECTOR('',#76515,1.); +#76515 = DIRECTION('',(0.,-1.,0.)); +#76516 = ORIENTED_EDGE('',*,*,#76517,.F.); +#76517 = EDGE_CURVE('',#76518,#76510,#76520,.T.); +#76518 = VERTEX_POINT('',#76519); +#76519 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76520 = LINE('',#76521,#76522); +#76521 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76522 = VECTOR('',#76523,1.); +#76523 = DIRECTION('',(0.,0.,1.)); +#76524 = ORIENTED_EDGE('',*,*,#76525,.F.); +#76525 = EDGE_CURVE('',#76487,#76518,#76526,.T.); +#76526 = LINE('',#76527,#76528); +#76527 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76528 = VECTOR('',#76529,1.); +#76529 = DIRECTION('',(0.,-1.,0.)); +#76530 = PLANE('',#76531); +#76531 = AXIS2_PLACEMENT_3D('',#76532,#76533,#76534); +#76532 = CARTESIAN_POINT('',(5.55,-5.6792,1.519)); +#76533 = DIRECTION('',(1.,0.,0.)); +#76534 = DIRECTION('',(0.,-1.,0.)); +#76535 = ADVANCED_FACE('',(#76536),#76561,.F.); +#76536 = FACE_BOUND('',#76537,.F.); +#76537 = EDGE_LOOP('',(#76538,#76539,#76547,#76555)); +#76538 = ORIENTED_EDGE('',*,*,#76517,.T.); +#76539 = ORIENTED_EDGE('',*,*,#76540,.T.); +#76540 = EDGE_CURVE('',#76510,#76541,#76543,.T.); +#76541 = VERTEX_POINT('',#76542); +#76542 = CARTESIAN_POINT('',(5.8,-8.0392,1.568)); +#76543 = LINE('',#76544,#76545); +#76544 = CARTESIAN_POINT('',(5.55,-8.0392,1.568)); +#76545 = VECTOR('',#76546,1.); +#76546 = DIRECTION('',(1.,0.,0.)); +#76547 = ORIENTED_EDGE('',*,*,#76548,.F.); +#76548 = EDGE_CURVE('',#76549,#76541,#76551,.T.); +#76549 = VERTEX_POINT('',#76550); +#76550 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76551 = LINE('',#76552,#76553); +#76552 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76553 = VECTOR('',#76554,1.); +#76554 = DIRECTION('',(0.,0.,1.)); +#76555 = ORIENTED_EDGE('',*,*,#76556,.F.); +#76556 = EDGE_CURVE('',#76518,#76549,#76557,.T.); +#76557 = LINE('',#76558,#76559); +#76558 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76559 = VECTOR('',#76560,1.); +#76560 = DIRECTION('',(1.,0.,0.)); +#76561 = PLANE('',#76562); +#76562 = AXIS2_PLACEMENT_3D('',#76563,#76564,#76565); +#76563 = CARTESIAN_POINT('',(5.55,-8.0392,1.519)); +#76564 = DIRECTION('',(0.,1.,0.)); +#76565 = DIRECTION('',(1.,0.,0.)); +#76566 = ADVANCED_FACE('',(#76567),#76583,.F.); +#76567 = FACE_BOUND('',#76568,.F.); +#76568 = EDGE_LOOP('',(#76569,#76570,#76576,#76577)); +#76569 = ORIENTED_EDGE('',*,*,#76548,.T.); +#76570 = ORIENTED_EDGE('',*,*,#76571,.T.); +#76571 = EDGE_CURVE('',#76541,#76471,#76572,.T.); +#76572 = LINE('',#76573,#76574); +#76573 = CARTESIAN_POINT('',(5.8,-8.0392,1.568)); +#76574 = VECTOR('',#76575,1.); +#76575 = DIRECTION('',(0.,1.,0.)); +#76576 = ORIENTED_EDGE('',*,*,#76468,.F.); +#76577 = ORIENTED_EDGE('',*,*,#76578,.F.); +#76578 = EDGE_CURVE('',#76549,#76469,#76579,.T.); +#76579 = LINE('',#76580,#76581); +#76580 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76581 = VECTOR('',#76582,1.); +#76582 = DIRECTION('',(0.,1.,0.)); +#76583 = PLANE('',#76584); +#76584 = AXIS2_PLACEMENT_3D('',#76585,#76586,#76587); +#76585 = CARTESIAN_POINT('',(5.8,-8.0392,1.519)); +#76586 = DIRECTION('',(-1.,0.,0.)); +#76587 = DIRECTION('',(0.,1.,0.)); +#76588 = ADVANCED_FACE('',(#76589),#76595,.F.); +#76589 = FACE_BOUND('',#76590,.F.); +#76590 = EDGE_LOOP('',(#76591,#76592,#76593,#76594)); +#76591 = ORIENTED_EDGE('',*,*,#76494,.T.); +#76592 = ORIENTED_EDGE('',*,*,#76525,.T.); +#76593 = ORIENTED_EDGE('',*,*,#76556,.T.); +#76594 = ORIENTED_EDGE('',*,*,#76578,.T.); +#76595 = PLANE('',#76596); +#76596 = AXIS2_PLACEMENT_3D('',#76597,#76598,#76599); +#76597 = CARTESIAN_POINT('',(5.675,-6.8592,1.519)); +#76598 = DIRECTION('',(0.,0.,1.)); +#76599 = DIRECTION('',(1.,0.,-0.)); +#76600 = ADVANCED_FACE('',(#76601),#76607,.T.); +#76601 = FACE_BOUND('',#76602,.T.); +#76602 = EDGE_LOOP('',(#76603,#76604,#76605,#76606)); +#76603 = ORIENTED_EDGE('',*,*,#76478,.T.); +#76604 = ORIENTED_EDGE('',*,*,#76509,.T.); +#76605 = ORIENTED_EDGE('',*,*,#76540,.T.); +#76606 = ORIENTED_EDGE('',*,*,#76571,.T.); +#76607 = PLANE('',#76608); +#76608 = AXIS2_PLACEMENT_3D('',#76609,#76610,#76611); +#76609 = CARTESIAN_POINT('',(5.675,-6.8592,1.568)); +#76610 = DIRECTION('',(0.,0.,1.)); +#76611 = DIRECTION('',(1.,0.,-0.)); +#76612 = MANIFOLD_SOLID_BREP('',#76613); +#76613 = CLOSED_SHELL('',(#76614,#76654,#76685,#76716,#76738,#76750)); +#76614 = ADVANCED_FACE('',(#76615),#76649,.T.); +#76615 = FACE_BOUND('',#76616,.T.); +#76616 = EDGE_LOOP('',(#76617,#76627,#76635,#76643)); +#76617 = ORIENTED_EDGE('',*,*,#76618,.T.); +#76618 = EDGE_CURVE('',#76619,#76621,#76623,.T.); +#76619 = VERTEX_POINT('',#76620); +#76620 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76621 = VERTEX_POINT('',#76622); +#76622 = CARTESIAN_POINT('',(2.1,-5.6792,2.219)); +#76623 = LINE('',#76624,#76625); +#76624 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76625 = VECTOR('',#76626,1.); +#76626 = DIRECTION('',(0.,0.,1.)); +#76627 = ORIENTED_EDGE('',*,*,#76628,.T.); +#76628 = EDGE_CURVE('',#76621,#76629,#76631,.T.); +#76629 = VERTEX_POINT('',#76630); +#76630 = CARTESIAN_POINT('',(2.35,-5.6792,2.219)); +#76631 = LINE('',#76632,#76633); +#76632 = CARTESIAN_POINT('',(2.1,-5.6792,2.219)); +#76633 = VECTOR('',#76634,1.); +#76634 = DIRECTION('',(1.,0.,0.)); +#76635 = ORIENTED_EDGE('',*,*,#76636,.F.); +#76636 = EDGE_CURVE('',#76637,#76629,#76639,.T.); +#76637 = VERTEX_POINT('',#76638); +#76638 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76639 = LINE('',#76640,#76641); +#76640 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76641 = VECTOR('',#76642,1.); +#76642 = DIRECTION('',(0.,0.,1.)); +#76643 = ORIENTED_EDGE('',*,*,#76644,.F.); +#76644 = EDGE_CURVE('',#76619,#76637,#76645,.T.); +#76645 = LINE('',#76646,#76647); +#76646 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76647 = VECTOR('',#76648,1.); +#76648 = DIRECTION('',(1.,0.,0.)); +#76649 = PLANE('',#76650); +#76650 = AXIS2_PLACEMENT_3D('',#76651,#76652,#76653); +#76651 = CARTESIAN_POINT('',(2.1,-5.6792,2.17)); +#76652 = DIRECTION('',(0.,1.,0.)); +#76653 = DIRECTION('',(1.,0.,0.)); +#76654 = ADVANCED_FACE('',(#76655),#76680,.T.); +#76655 = FACE_BOUND('',#76656,.T.); +#76656 = EDGE_LOOP('',(#76657,#76658,#76666,#76674)); +#76657 = ORIENTED_EDGE('',*,*,#76636,.T.); +#76658 = ORIENTED_EDGE('',*,*,#76659,.T.); +#76659 = EDGE_CURVE('',#76629,#76660,#76662,.T.); +#76660 = VERTEX_POINT('',#76661); +#76661 = CARTESIAN_POINT('',(2.35,-7.6392,2.219)); +#76662 = LINE('',#76663,#76664); +#76663 = CARTESIAN_POINT('',(2.35,-5.6792,2.219)); +#76664 = VECTOR('',#76665,1.); +#76665 = DIRECTION('',(0.,-1.,0.)); +#76666 = ORIENTED_EDGE('',*,*,#76667,.F.); +#76667 = EDGE_CURVE('',#76668,#76660,#76670,.T.); +#76668 = VERTEX_POINT('',#76669); +#76669 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76670 = LINE('',#76671,#76672); +#76671 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76672 = VECTOR('',#76673,1.); +#76673 = DIRECTION('',(0.,0.,1.)); +#76674 = ORIENTED_EDGE('',*,*,#76675,.F.); +#76675 = EDGE_CURVE('',#76637,#76668,#76676,.T.); +#76676 = LINE('',#76677,#76678); +#76677 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76678 = VECTOR('',#76679,1.); +#76679 = DIRECTION('',(0.,-1.,0.)); +#76680 = PLANE('',#76681); +#76681 = AXIS2_PLACEMENT_3D('',#76682,#76683,#76684); +#76682 = CARTESIAN_POINT('',(2.35,-5.6792,2.17)); +#76683 = DIRECTION('',(1.,0.,0.)); +#76684 = DIRECTION('',(0.,-1.,0.)); +#76685 = ADVANCED_FACE('',(#76686),#76711,.T.); +#76686 = FACE_BOUND('',#76687,.T.); +#76687 = EDGE_LOOP('',(#76688,#76689,#76697,#76705)); +#76688 = ORIENTED_EDGE('',*,*,#76667,.T.); +#76689 = ORIENTED_EDGE('',*,*,#76690,.T.); +#76690 = EDGE_CURVE('',#76660,#76691,#76693,.T.); +#76691 = VERTEX_POINT('',#76692); +#76692 = CARTESIAN_POINT('',(2.1,-7.6392,2.219)); +#76693 = LINE('',#76694,#76695); +#76694 = CARTESIAN_POINT('',(2.35,-7.6392,2.219)); +#76695 = VECTOR('',#76696,1.); +#76696 = DIRECTION('',(-1.,0.,0.)); +#76697 = ORIENTED_EDGE('',*,*,#76698,.F.); +#76698 = EDGE_CURVE('',#76699,#76691,#76701,.T.); +#76699 = VERTEX_POINT('',#76700); +#76700 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76701 = LINE('',#76702,#76703); +#76702 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76703 = VECTOR('',#76704,1.); +#76704 = DIRECTION('',(0.,0.,1.)); +#76705 = ORIENTED_EDGE('',*,*,#76706,.F.); +#76706 = EDGE_CURVE('',#76668,#76699,#76707,.T.); +#76707 = LINE('',#76708,#76709); +#76708 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76709 = VECTOR('',#76710,1.); +#76710 = DIRECTION('',(-1.,0.,0.)); +#76711 = PLANE('',#76712); +#76712 = AXIS2_PLACEMENT_3D('',#76713,#76714,#76715); +#76713 = CARTESIAN_POINT('',(2.35,-7.6392,2.17)); +#76714 = DIRECTION('',(0.,-1.,0.)); +#76715 = DIRECTION('',(-1.,0.,0.)); +#76716 = ADVANCED_FACE('',(#76717),#76733,.T.); +#76717 = FACE_BOUND('',#76718,.T.); +#76718 = EDGE_LOOP('',(#76719,#76720,#76726,#76727)); +#76719 = ORIENTED_EDGE('',*,*,#76698,.T.); +#76720 = ORIENTED_EDGE('',*,*,#76721,.T.); +#76721 = EDGE_CURVE('',#76691,#76621,#76722,.T.); +#76722 = LINE('',#76723,#76724); +#76723 = CARTESIAN_POINT('',(2.1,-7.6392,2.219)); +#76724 = VECTOR('',#76725,1.); +#76725 = DIRECTION('',(0.,1.,0.)); +#76726 = ORIENTED_EDGE('',*,*,#76618,.F.); +#76727 = ORIENTED_EDGE('',*,*,#76728,.F.); +#76728 = EDGE_CURVE('',#76699,#76619,#76729,.T.); +#76729 = LINE('',#76730,#76731); +#76730 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76731 = VECTOR('',#76732,1.); +#76732 = DIRECTION('',(0.,1.,0.)); +#76733 = PLANE('',#76734); +#76734 = AXIS2_PLACEMENT_3D('',#76735,#76736,#76737); +#76735 = CARTESIAN_POINT('',(2.1,-7.6392,2.17)); +#76736 = DIRECTION('',(-1.,0.,0.)); +#76737 = DIRECTION('',(0.,1.,0.)); +#76738 = ADVANCED_FACE('',(#76739),#76745,.F.); +#76739 = FACE_BOUND('',#76740,.T.); +#76740 = EDGE_LOOP('',(#76741,#76742,#76743,#76744)); +#76741 = ORIENTED_EDGE('',*,*,#76644,.T.); +#76742 = ORIENTED_EDGE('',*,*,#76675,.T.); +#76743 = ORIENTED_EDGE('',*,*,#76706,.T.); +#76744 = ORIENTED_EDGE('',*,*,#76728,.T.); +#76745 = PLANE('',#76746); +#76746 = AXIS2_PLACEMENT_3D('',#76747,#76748,#76749); +#76747 = CARTESIAN_POINT('',(2.225,-6.6592,2.17)); +#76748 = DIRECTION('',(0.,0.,1.)); +#76749 = DIRECTION('',(1.,0.,-0.)); +#76750 = ADVANCED_FACE('',(#76751),#76757,.T.); +#76751 = FACE_BOUND('',#76752,.F.); +#76752 = EDGE_LOOP('',(#76753,#76754,#76755,#76756)); +#76753 = ORIENTED_EDGE('',*,*,#76628,.T.); +#76754 = ORIENTED_EDGE('',*,*,#76659,.T.); +#76755 = ORIENTED_EDGE('',*,*,#76690,.T.); +#76756 = ORIENTED_EDGE('',*,*,#76721,.T.); +#76757 = PLANE('',#76758); +#76758 = AXIS2_PLACEMENT_3D('',#76759,#76760,#76761); +#76759 = CARTESIAN_POINT('',(2.225,-6.6592,2.219)); +#76760 = DIRECTION('',(0.,0.,1.)); +#76761 = DIRECTION('',(1.,0.,-0.)); +#76762 = MANIFOLD_SOLID_BREP('',#76763); +#76763 = CLOSED_SHELL('',(#76764,#76804,#76835,#76866,#76888,#76900)); +#76764 = ADVANCED_FACE('',(#76765),#76799,.T.); +#76765 = FACE_BOUND('',#76766,.T.); +#76766 = EDGE_LOOP('',(#76767,#76777,#76785,#76793)); +#76767 = ORIENTED_EDGE('',*,*,#76768,.T.); +#76768 = EDGE_CURVE('',#76769,#76771,#76773,.T.); +#76769 = VERTEX_POINT('',#76770); +#76770 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76771 = VERTEX_POINT('',#76772); +#76772 = CARTESIAN_POINT('',(2.1,-5.6792,1.568)); +#76773 = LINE('',#76774,#76775); +#76774 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76775 = VECTOR('',#76776,1.); +#76776 = DIRECTION('',(0.,0.,1.)); +#76777 = ORIENTED_EDGE('',*,*,#76778,.T.); +#76778 = EDGE_CURVE('',#76771,#76779,#76781,.T.); +#76779 = VERTEX_POINT('',#76780); +#76780 = CARTESIAN_POINT('',(2.35,-5.6792,1.568)); +#76781 = LINE('',#76782,#76783); +#76782 = CARTESIAN_POINT('',(2.1,-5.6792,1.568)); +#76783 = VECTOR('',#76784,1.); +#76784 = DIRECTION('',(1.,0.,0.)); +#76785 = ORIENTED_EDGE('',*,*,#76786,.F.); +#76786 = EDGE_CURVE('',#76787,#76779,#76789,.T.); +#76787 = VERTEX_POINT('',#76788); +#76788 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76789 = LINE('',#76790,#76791); +#76790 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76791 = VECTOR('',#76792,1.); +#76792 = DIRECTION('',(0.,0.,1.)); +#76793 = ORIENTED_EDGE('',*,*,#76794,.F.); +#76794 = EDGE_CURVE('',#76769,#76787,#76795,.T.); +#76795 = LINE('',#76796,#76797); +#76796 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76797 = VECTOR('',#76798,1.); +#76798 = DIRECTION('',(1.,0.,0.)); +#76799 = PLANE('',#76800); +#76800 = AXIS2_PLACEMENT_3D('',#76801,#76802,#76803); +#76801 = CARTESIAN_POINT('',(2.1,-5.6792,1.519)); +#76802 = DIRECTION('',(0.,1.,0.)); +#76803 = DIRECTION('',(1.,0.,0.)); +#76804 = ADVANCED_FACE('',(#76805),#76830,.T.); +#76805 = FACE_BOUND('',#76806,.T.); +#76806 = EDGE_LOOP('',(#76807,#76808,#76816,#76824)); +#76807 = ORIENTED_EDGE('',*,*,#76786,.T.); +#76808 = ORIENTED_EDGE('',*,*,#76809,.T.); +#76809 = EDGE_CURVE('',#76779,#76810,#76812,.T.); +#76810 = VERTEX_POINT('',#76811); +#76811 = CARTESIAN_POINT('',(2.35,-7.6392,1.568)); +#76812 = LINE('',#76813,#76814); +#76813 = CARTESIAN_POINT('',(2.35,-5.6792,1.568)); +#76814 = VECTOR('',#76815,1.); +#76815 = DIRECTION('',(0.,-1.,0.)); +#76816 = ORIENTED_EDGE('',*,*,#76817,.F.); +#76817 = EDGE_CURVE('',#76818,#76810,#76820,.T.); +#76818 = VERTEX_POINT('',#76819); +#76819 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76820 = LINE('',#76821,#76822); +#76821 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76822 = VECTOR('',#76823,1.); +#76823 = DIRECTION('',(0.,0.,1.)); +#76824 = ORIENTED_EDGE('',*,*,#76825,.F.); +#76825 = EDGE_CURVE('',#76787,#76818,#76826,.T.); +#76826 = LINE('',#76827,#76828); +#76827 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76828 = VECTOR('',#76829,1.); +#76829 = DIRECTION('',(0.,-1.,0.)); +#76830 = PLANE('',#76831); +#76831 = AXIS2_PLACEMENT_3D('',#76832,#76833,#76834); +#76832 = CARTESIAN_POINT('',(2.35,-5.6792,1.519)); +#76833 = DIRECTION('',(1.,0.,0.)); +#76834 = DIRECTION('',(0.,-1.,0.)); +#76835 = ADVANCED_FACE('',(#76836),#76861,.T.); +#76836 = FACE_BOUND('',#76837,.T.); +#76837 = EDGE_LOOP('',(#76838,#76839,#76847,#76855)); +#76838 = ORIENTED_EDGE('',*,*,#76817,.T.); +#76839 = ORIENTED_EDGE('',*,*,#76840,.T.); +#76840 = EDGE_CURVE('',#76810,#76841,#76843,.T.); +#76841 = VERTEX_POINT('',#76842); +#76842 = CARTESIAN_POINT('',(2.1,-7.6392,1.568)); +#76843 = LINE('',#76844,#76845); +#76844 = CARTESIAN_POINT('',(2.35,-7.6392,1.568)); +#76845 = VECTOR('',#76846,1.); +#76846 = DIRECTION('',(-1.,0.,0.)); +#76847 = ORIENTED_EDGE('',*,*,#76848,.F.); +#76848 = EDGE_CURVE('',#76849,#76841,#76851,.T.); +#76849 = VERTEX_POINT('',#76850); +#76850 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76851 = LINE('',#76852,#76853); +#76852 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76853 = VECTOR('',#76854,1.); +#76854 = DIRECTION('',(0.,0.,1.)); +#76855 = ORIENTED_EDGE('',*,*,#76856,.F.); +#76856 = EDGE_CURVE('',#76818,#76849,#76857,.T.); +#76857 = LINE('',#76858,#76859); +#76858 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76859 = VECTOR('',#76860,1.); +#76860 = DIRECTION('',(-1.,0.,0.)); +#76861 = PLANE('',#76862); +#76862 = AXIS2_PLACEMENT_3D('',#76863,#76864,#76865); +#76863 = CARTESIAN_POINT('',(2.35,-7.6392,1.519)); +#76864 = DIRECTION('',(0.,-1.,0.)); +#76865 = DIRECTION('',(-1.,0.,0.)); +#76866 = ADVANCED_FACE('',(#76867),#76883,.T.); +#76867 = FACE_BOUND('',#76868,.T.); +#76868 = EDGE_LOOP('',(#76869,#76870,#76876,#76877)); +#76869 = ORIENTED_EDGE('',*,*,#76848,.T.); +#76870 = ORIENTED_EDGE('',*,*,#76871,.T.); +#76871 = EDGE_CURVE('',#76841,#76771,#76872,.T.); +#76872 = LINE('',#76873,#76874); +#76873 = CARTESIAN_POINT('',(2.1,-7.6392,1.568)); +#76874 = VECTOR('',#76875,1.); +#76875 = DIRECTION('',(0.,1.,0.)); +#76876 = ORIENTED_EDGE('',*,*,#76768,.F.); +#76877 = ORIENTED_EDGE('',*,*,#76878,.F.); +#76878 = EDGE_CURVE('',#76849,#76769,#76879,.T.); +#76879 = LINE('',#76880,#76881); +#76880 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76881 = VECTOR('',#76882,1.); +#76882 = DIRECTION('',(0.,1.,0.)); +#76883 = PLANE('',#76884); +#76884 = AXIS2_PLACEMENT_3D('',#76885,#76886,#76887); +#76885 = CARTESIAN_POINT('',(2.1,-7.6392,1.519)); +#76886 = DIRECTION('',(-1.,0.,0.)); +#76887 = DIRECTION('',(0.,1.,0.)); +#76888 = ADVANCED_FACE('',(#76889),#76895,.F.); +#76889 = FACE_BOUND('',#76890,.T.); +#76890 = EDGE_LOOP('',(#76891,#76892,#76893,#76894)); +#76891 = ORIENTED_EDGE('',*,*,#76794,.T.); +#76892 = ORIENTED_EDGE('',*,*,#76825,.T.); +#76893 = ORIENTED_EDGE('',*,*,#76856,.T.); +#76894 = ORIENTED_EDGE('',*,*,#76878,.T.); +#76895 = PLANE('',#76896); +#76896 = AXIS2_PLACEMENT_3D('',#76897,#76898,#76899); +#76897 = CARTESIAN_POINT('',(2.225,-6.6592,1.519)); +#76898 = DIRECTION('',(0.,0.,1.)); +#76899 = DIRECTION('',(1.,0.,-0.)); +#76900 = ADVANCED_FACE('',(#76901),#76907,.T.); +#76901 = FACE_BOUND('',#76902,.F.); +#76902 = EDGE_LOOP('',(#76903,#76904,#76905,#76906)); +#76903 = ORIENTED_EDGE('',*,*,#76778,.T.); +#76904 = ORIENTED_EDGE('',*,*,#76809,.T.); +#76905 = ORIENTED_EDGE('',*,*,#76840,.T.); +#76906 = ORIENTED_EDGE('',*,*,#76871,.T.); +#76907 = PLANE('',#76908); +#76908 = AXIS2_PLACEMENT_3D('',#76909,#76910,#76911); +#76909 = CARTESIAN_POINT('',(2.225,-6.6592,1.568)); +#76910 = DIRECTION('',(0.,0.,1.)); +#76911 = DIRECTION('',(1.,0.,-0.)); +#76912 = MANIFOLD_SOLID_BREP('',#76913); +#76913 = CLOSED_SHELL('',(#76914,#76954,#76985,#77016,#77038,#77050)); +#76914 = ADVANCED_FACE('',(#76915),#76949,.T.); +#76915 = FACE_BOUND('',#76916,.T.); +#76916 = EDGE_LOOP('',(#76917,#76927,#76935,#76943)); +#76917 = ORIENTED_EDGE('',*,*,#76918,.T.); +#76918 = EDGE_CURVE('',#76919,#76921,#76923,.T.); +#76919 = VERTEX_POINT('',#76920); +#76920 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76921 = VERTEX_POINT('',#76922); +#76922 = CARTESIAN_POINT('',(2.6,-5.6792,2.219)); +#76923 = LINE('',#76924,#76925); +#76924 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76925 = VECTOR('',#76926,1.); +#76926 = DIRECTION('',(0.,0.,1.)); +#76927 = ORIENTED_EDGE('',*,*,#76928,.T.); +#76928 = EDGE_CURVE('',#76921,#76929,#76931,.T.); +#76929 = VERTEX_POINT('',#76930); +#76930 = CARTESIAN_POINT('',(2.85,-5.6792,2.219)); +#76931 = LINE('',#76932,#76933); +#76932 = CARTESIAN_POINT('',(2.6,-5.6792,2.219)); +#76933 = VECTOR('',#76934,1.); +#76934 = DIRECTION('',(1.,0.,0.)); +#76935 = ORIENTED_EDGE('',*,*,#76936,.F.); +#76936 = EDGE_CURVE('',#76937,#76929,#76939,.T.); +#76937 = VERTEX_POINT('',#76938); +#76938 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76939 = LINE('',#76940,#76941); +#76940 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76941 = VECTOR('',#76942,1.); +#76942 = DIRECTION('',(0.,0.,1.)); +#76943 = ORIENTED_EDGE('',*,*,#76944,.F.); +#76944 = EDGE_CURVE('',#76919,#76937,#76945,.T.); +#76945 = LINE('',#76946,#76947); +#76946 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76947 = VECTOR('',#76948,1.); +#76948 = DIRECTION('',(1.,0.,0.)); +#76949 = PLANE('',#76950); +#76950 = AXIS2_PLACEMENT_3D('',#76951,#76952,#76953); +#76951 = CARTESIAN_POINT('',(2.6,-5.6792,2.17)); +#76952 = DIRECTION('',(0.,1.,0.)); +#76953 = DIRECTION('',(1.,0.,0.)); +#76954 = ADVANCED_FACE('',(#76955),#76980,.T.); +#76955 = FACE_BOUND('',#76956,.T.); +#76956 = EDGE_LOOP('',(#76957,#76958,#76966,#76974)); +#76957 = ORIENTED_EDGE('',*,*,#76936,.T.); +#76958 = ORIENTED_EDGE('',*,*,#76959,.T.); +#76959 = EDGE_CURVE('',#76929,#76960,#76962,.T.); +#76960 = VERTEX_POINT('',#76961); +#76961 = CARTESIAN_POINT('',(2.85,-7.6392,2.219)); +#76962 = LINE('',#76963,#76964); +#76963 = CARTESIAN_POINT('',(2.85,-5.6792,2.219)); +#76964 = VECTOR('',#76965,1.); +#76965 = DIRECTION('',(0.,-1.,0.)); +#76966 = ORIENTED_EDGE('',*,*,#76967,.F.); +#76967 = EDGE_CURVE('',#76968,#76960,#76970,.T.); +#76968 = VERTEX_POINT('',#76969); +#76969 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#76970 = LINE('',#76971,#76972); +#76971 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#76972 = VECTOR('',#76973,1.); +#76973 = DIRECTION('',(0.,0.,1.)); +#76974 = ORIENTED_EDGE('',*,*,#76975,.F.); +#76975 = EDGE_CURVE('',#76937,#76968,#76976,.T.); +#76976 = LINE('',#76977,#76978); +#76977 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76978 = VECTOR('',#76979,1.); +#76979 = DIRECTION('',(0.,-1.,0.)); +#76980 = PLANE('',#76981); +#76981 = AXIS2_PLACEMENT_3D('',#76982,#76983,#76984); +#76982 = CARTESIAN_POINT('',(2.85,-5.6792,2.17)); +#76983 = DIRECTION('',(1.,0.,0.)); +#76984 = DIRECTION('',(0.,-1.,0.)); +#76985 = ADVANCED_FACE('',(#76986),#77011,.T.); +#76986 = FACE_BOUND('',#76987,.T.); +#76987 = EDGE_LOOP('',(#76988,#76989,#76997,#77005)); +#76988 = ORIENTED_EDGE('',*,*,#76967,.T.); +#76989 = ORIENTED_EDGE('',*,*,#76990,.T.); +#76990 = EDGE_CURVE('',#76960,#76991,#76993,.T.); +#76991 = VERTEX_POINT('',#76992); +#76992 = CARTESIAN_POINT('',(2.6,-7.6392,2.219)); +#76993 = LINE('',#76994,#76995); +#76994 = CARTESIAN_POINT('',(2.85,-7.6392,2.219)); +#76995 = VECTOR('',#76996,1.); +#76996 = DIRECTION('',(-1.,0.,0.)); +#76997 = ORIENTED_EDGE('',*,*,#76998,.F.); +#76998 = EDGE_CURVE('',#76999,#76991,#77001,.T.); +#76999 = VERTEX_POINT('',#77000); +#77000 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77001 = LINE('',#77002,#77003); +#77002 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77003 = VECTOR('',#77004,1.); +#77004 = DIRECTION('',(0.,0.,1.)); +#77005 = ORIENTED_EDGE('',*,*,#77006,.F.); +#77006 = EDGE_CURVE('',#76968,#76999,#77007,.T.); +#77007 = LINE('',#77008,#77009); +#77008 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#77009 = VECTOR('',#77010,1.); +#77010 = DIRECTION('',(-1.,0.,0.)); +#77011 = PLANE('',#77012); +#77012 = AXIS2_PLACEMENT_3D('',#77013,#77014,#77015); +#77013 = CARTESIAN_POINT('',(2.85,-7.6392,2.17)); +#77014 = DIRECTION('',(0.,-1.,0.)); +#77015 = DIRECTION('',(-1.,0.,0.)); +#77016 = ADVANCED_FACE('',(#77017),#77033,.T.); +#77017 = FACE_BOUND('',#77018,.T.); +#77018 = EDGE_LOOP('',(#77019,#77020,#77026,#77027)); +#77019 = ORIENTED_EDGE('',*,*,#76998,.T.); +#77020 = ORIENTED_EDGE('',*,*,#77021,.T.); +#77021 = EDGE_CURVE('',#76991,#76921,#77022,.T.); +#77022 = LINE('',#77023,#77024); +#77023 = CARTESIAN_POINT('',(2.6,-7.6392,2.219)); +#77024 = VECTOR('',#77025,1.); +#77025 = DIRECTION('',(0.,1.,0.)); +#77026 = ORIENTED_EDGE('',*,*,#76918,.F.); +#77027 = ORIENTED_EDGE('',*,*,#77028,.F.); +#77028 = EDGE_CURVE('',#76999,#76919,#77029,.T.); +#77029 = LINE('',#77030,#77031); +#77030 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77031 = VECTOR('',#77032,1.); +#77032 = DIRECTION('',(0.,1.,0.)); +#77033 = PLANE('',#77034); +#77034 = AXIS2_PLACEMENT_3D('',#77035,#77036,#77037); +#77035 = CARTESIAN_POINT('',(2.6,-7.6392,2.17)); +#77036 = DIRECTION('',(-1.,0.,0.)); +#77037 = DIRECTION('',(0.,1.,0.)); +#77038 = ADVANCED_FACE('',(#77039),#77045,.F.); +#77039 = FACE_BOUND('',#77040,.T.); +#77040 = EDGE_LOOP('',(#77041,#77042,#77043,#77044)); +#77041 = ORIENTED_EDGE('',*,*,#76944,.T.); +#77042 = ORIENTED_EDGE('',*,*,#76975,.T.); +#77043 = ORIENTED_EDGE('',*,*,#77006,.T.); +#77044 = ORIENTED_EDGE('',*,*,#77028,.T.); +#77045 = PLANE('',#77046); +#77046 = AXIS2_PLACEMENT_3D('',#77047,#77048,#77049); +#77047 = CARTESIAN_POINT('',(2.725,-6.6592,2.17)); +#77048 = DIRECTION('',(0.,0.,1.)); +#77049 = DIRECTION('',(1.,0.,-0.)); +#77050 = ADVANCED_FACE('',(#77051),#77057,.T.); +#77051 = FACE_BOUND('',#77052,.F.); +#77052 = EDGE_LOOP('',(#77053,#77054,#77055,#77056)); +#77053 = ORIENTED_EDGE('',*,*,#76928,.T.); +#77054 = ORIENTED_EDGE('',*,*,#76959,.T.); +#77055 = ORIENTED_EDGE('',*,*,#76990,.T.); +#77056 = ORIENTED_EDGE('',*,*,#77021,.T.); +#77057 = PLANE('',#77058); +#77058 = AXIS2_PLACEMENT_3D('',#77059,#77060,#77061); +#77059 = CARTESIAN_POINT('',(2.725,-6.6592,2.219)); +#77060 = DIRECTION('',(0.,0.,1.)); +#77061 = DIRECTION('',(1.,0.,-0.)); +#77062 = MANIFOLD_SOLID_BREP('',#77063); +#77063 = CLOSED_SHELL('',(#77064,#77104,#77135,#77166,#77188,#77200)); +#77064 = ADVANCED_FACE('',(#77065),#77099,.T.); +#77065 = FACE_BOUND('',#77066,.T.); +#77066 = EDGE_LOOP('',(#77067,#77077,#77085,#77093)); +#77067 = ORIENTED_EDGE('',*,*,#77068,.T.); +#77068 = EDGE_CURVE('',#77069,#77071,#77073,.T.); +#77069 = VERTEX_POINT('',#77070); +#77070 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77071 = VERTEX_POINT('',#77072); +#77072 = CARTESIAN_POINT('',(2.6,-5.6792,1.568)); +#77073 = LINE('',#77074,#77075); +#77074 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77075 = VECTOR('',#77076,1.); +#77076 = DIRECTION('',(0.,0.,1.)); +#77077 = ORIENTED_EDGE('',*,*,#77078,.T.); +#77078 = EDGE_CURVE('',#77071,#77079,#77081,.T.); +#77079 = VERTEX_POINT('',#77080); +#77080 = CARTESIAN_POINT('',(2.85,-5.6792,1.568)); +#77081 = LINE('',#77082,#77083); +#77082 = CARTESIAN_POINT('',(2.6,-5.6792,1.568)); +#77083 = VECTOR('',#77084,1.); +#77084 = DIRECTION('',(1.,0.,0.)); +#77085 = ORIENTED_EDGE('',*,*,#77086,.F.); +#77086 = EDGE_CURVE('',#77087,#77079,#77089,.T.); +#77087 = VERTEX_POINT('',#77088); +#77088 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77089 = LINE('',#77090,#77091); +#77090 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77091 = VECTOR('',#77092,1.); +#77092 = DIRECTION('',(0.,0.,1.)); +#77093 = ORIENTED_EDGE('',*,*,#77094,.F.); +#77094 = EDGE_CURVE('',#77069,#77087,#77095,.T.); +#77095 = LINE('',#77096,#77097); +#77096 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77097 = VECTOR('',#77098,1.); +#77098 = DIRECTION('',(1.,0.,0.)); +#77099 = PLANE('',#77100); +#77100 = AXIS2_PLACEMENT_3D('',#77101,#77102,#77103); +#77101 = CARTESIAN_POINT('',(2.6,-5.6792,1.519)); +#77102 = DIRECTION('',(0.,1.,0.)); +#77103 = DIRECTION('',(1.,0.,0.)); +#77104 = ADVANCED_FACE('',(#77105),#77130,.T.); +#77105 = FACE_BOUND('',#77106,.T.); +#77106 = EDGE_LOOP('',(#77107,#77108,#77116,#77124)); +#77107 = ORIENTED_EDGE('',*,*,#77086,.T.); +#77108 = ORIENTED_EDGE('',*,*,#77109,.T.); +#77109 = EDGE_CURVE('',#77079,#77110,#77112,.T.); +#77110 = VERTEX_POINT('',#77111); +#77111 = CARTESIAN_POINT('',(2.85,-7.6392,1.568)); +#77112 = LINE('',#77113,#77114); +#77113 = CARTESIAN_POINT('',(2.85,-5.6792,1.568)); +#77114 = VECTOR('',#77115,1.); +#77115 = DIRECTION('',(0.,-1.,0.)); +#77116 = ORIENTED_EDGE('',*,*,#77117,.F.); +#77117 = EDGE_CURVE('',#77118,#77110,#77120,.T.); +#77118 = VERTEX_POINT('',#77119); +#77119 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77120 = LINE('',#77121,#77122); +#77121 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77122 = VECTOR('',#77123,1.); +#77123 = DIRECTION('',(0.,0.,1.)); +#77124 = ORIENTED_EDGE('',*,*,#77125,.F.); +#77125 = EDGE_CURVE('',#77087,#77118,#77126,.T.); +#77126 = LINE('',#77127,#77128); +#77127 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77128 = VECTOR('',#77129,1.); +#77129 = DIRECTION('',(0.,-1.,0.)); +#77130 = PLANE('',#77131); +#77131 = AXIS2_PLACEMENT_3D('',#77132,#77133,#77134); +#77132 = CARTESIAN_POINT('',(2.85,-5.6792,1.519)); +#77133 = DIRECTION('',(1.,0.,0.)); +#77134 = DIRECTION('',(0.,-1.,0.)); +#77135 = ADVANCED_FACE('',(#77136),#77161,.T.); +#77136 = FACE_BOUND('',#77137,.T.); +#77137 = EDGE_LOOP('',(#77138,#77139,#77147,#77155)); +#77138 = ORIENTED_EDGE('',*,*,#77117,.T.); +#77139 = ORIENTED_EDGE('',*,*,#77140,.T.); +#77140 = EDGE_CURVE('',#77110,#77141,#77143,.T.); +#77141 = VERTEX_POINT('',#77142); +#77142 = CARTESIAN_POINT('',(2.6,-7.6392,1.568)); +#77143 = LINE('',#77144,#77145); +#77144 = CARTESIAN_POINT('',(2.85,-7.6392,1.568)); +#77145 = VECTOR('',#77146,1.); +#77146 = DIRECTION('',(-1.,0.,0.)); +#77147 = ORIENTED_EDGE('',*,*,#77148,.F.); +#77148 = EDGE_CURVE('',#77149,#77141,#77151,.T.); +#77149 = VERTEX_POINT('',#77150); +#77150 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77151 = LINE('',#77152,#77153); +#77152 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77153 = VECTOR('',#77154,1.); +#77154 = DIRECTION('',(0.,0.,1.)); +#77155 = ORIENTED_EDGE('',*,*,#77156,.F.); +#77156 = EDGE_CURVE('',#77118,#77149,#77157,.T.); +#77157 = LINE('',#77158,#77159); +#77158 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77159 = VECTOR('',#77160,1.); +#77160 = DIRECTION('',(-1.,0.,0.)); +#77161 = PLANE('',#77162); +#77162 = AXIS2_PLACEMENT_3D('',#77163,#77164,#77165); +#77163 = CARTESIAN_POINT('',(2.85,-7.6392,1.519)); +#77164 = DIRECTION('',(0.,-1.,0.)); +#77165 = DIRECTION('',(-1.,0.,0.)); +#77166 = ADVANCED_FACE('',(#77167),#77183,.T.); +#77167 = FACE_BOUND('',#77168,.T.); +#77168 = EDGE_LOOP('',(#77169,#77170,#77176,#77177)); +#77169 = ORIENTED_EDGE('',*,*,#77148,.T.); +#77170 = ORIENTED_EDGE('',*,*,#77171,.T.); +#77171 = EDGE_CURVE('',#77141,#77071,#77172,.T.); +#77172 = LINE('',#77173,#77174); +#77173 = CARTESIAN_POINT('',(2.6,-7.6392,1.568)); +#77174 = VECTOR('',#77175,1.); +#77175 = DIRECTION('',(0.,1.,0.)); +#77176 = ORIENTED_EDGE('',*,*,#77068,.F.); +#77177 = ORIENTED_EDGE('',*,*,#77178,.F.); +#77178 = EDGE_CURVE('',#77149,#77069,#77179,.T.); +#77179 = LINE('',#77180,#77181); +#77180 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77181 = VECTOR('',#77182,1.); +#77182 = DIRECTION('',(0.,1.,0.)); +#77183 = PLANE('',#77184); +#77184 = AXIS2_PLACEMENT_3D('',#77185,#77186,#77187); +#77185 = CARTESIAN_POINT('',(2.6,-7.6392,1.519)); +#77186 = DIRECTION('',(-1.,0.,0.)); +#77187 = DIRECTION('',(0.,1.,0.)); +#77188 = ADVANCED_FACE('',(#77189),#77195,.F.); +#77189 = FACE_BOUND('',#77190,.T.); +#77190 = EDGE_LOOP('',(#77191,#77192,#77193,#77194)); +#77191 = ORIENTED_EDGE('',*,*,#77094,.T.); +#77192 = ORIENTED_EDGE('',*,*,#77125,.T.); +#77193 = ORIENTED_EDGE('',*,*,#77156,.T.); +#77194 = ORIENTED_EDGE('',*,*,#77178,.T.); +#77195 = PLANE('',#77196); +#77196 = AXIS2_PLACEMENT_3D('',#77197,#77198,#77199); +#77197 = CARTESIAN_POINT('',(2.725,-6.6592,1.519)); +#77198 = DIRECTION('',(0.,0.,1.)); +#77199 = DIRECTION('',(1.,0.,-0.)); +#77200 = ADVANCED_FACE('',(#77201),#77207,.T.); +#77201 = FACE_BOUND('',#77202,.F.); +#77202 = EDGE_LOOP('',(#77203,#77204,#77205,#77206)); +#77203 = ORIENTED_EDGE('',*,*,#77078,.T.); +#77204 = ORIENTED_EDGE('',*,*,#77109,.T.); +#77205 = ORIENTED_EDGE('',*,*,#77140,.T.); +#77206 = ORIENTED_EDGE('',*,*,#77171,.T.); +#77207 = PLANE('',#77208); +#77208 = AXIS2_PLACEMENT_3D('',#77209,#77210,#77211); +#77209 = CARTESIAN_POINT('',(2.725,-6.6592,1.568)); +#77210 = DIRECTION('',(0.,0.,1.)); +#77211 = DIRECTION('',(1.,0.,-0.)); +#77212 = MANIFOLD_SOLID_BREP('',#77213); +#77213 = CLOSED_SHELL('',(#77214,#77254,#77285,#77316,#77338,#77350)); +#77214 = ADVANCED_FACE('',(#77215),#77249,.T.); +#77215 = FACE_BOUND('',#77216,.T.); +#77216 = EDGE_LOOP('',(#77217,#77227,#77235,#77243)); +#77217 = ORIENTED_EDGE('',*,*,#77218,.T.); +#77218 = EDGE_CURVE('',#77219,#77221,#77223,.T.); +#77219 = VERTEX_POINT('',#77220); +#77220 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77221 = VERTEX_POINT('',#77222); +#77222 = CARTESIAN_POINT('',(3.1,-5.6792,2.219)); +#77223 = LINE('',#77224,#77225); +#77224 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77225 = VECTOR('',#77226,1.); +#77226 = DIRECTION('',(0.,0.,1.)); +#77227 = ORIENTED_EDGE('',*,*,#77228,.T.); +#77228 = EDGE_CURVE('',#77221,#77229,#77231,.T.); +#77229 = VERTEX_POINT('',#77230); +#77230 = CARTESIAN_POINT('',(3.35,-5.6792,2.219)); +#77231 = LINE('',#77232,#77233); +#77232 = CARTESIAN_POINT('',(3.1,-5.6792,2.219)); +#77233 = VECTOR('',#77234,1.); +#77234 = DIRECTION('',(1.,0.,0.)); +#77235 = ORIENTED_EDGE('',*,*,#77236,.F.); +#77236 = EDGE_CURVE('',#77237,#77229,#77239,.T.); +#77237 = VERTEX_POINT('',#77238); +#77238 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77239 = LINE('',#77240,#77241); +#77240 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77241 = VECTOR('',#77242,1.); +#77242 = DIRECTION('',(0.,0.,1.)); +#77243 = ORIENTED_EDGE('',*,*,#77244,.F.); +#77244 = EDGE_CURVE('',#77219,#77237,#77245,.T.); +#77245 = LINE('',#77246,#77247); +#77246 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77247 = VECTOR('',#77248,1.); +#77248 = DIRECTION('',(1.,0.,0.)); +#77249 = PLANE('',#77250); +#77250 = AXIS2_PLACEMENT_3D('',#77251,#77252,#77253); +#77251 = CARTESIAN_POINT('',(3.1,-5.6792,2.17)); +#77252 = DIRECTION('',(0.,1.,0.)); +#77253 = DIRECTION('',(1.,0.,0.)); +#77254 = ADVANCED_FACE('',(#77255),#77280,.T.); +#77255 = FACE_BOUND('',#77256,.T.); +#77256 = EDGE_LOOP('',(#77257,#77258,#77266,#77274)); +#77257 = ORIENTED_EDGE('',*,*,#77236,.T.); +#77258 = ORIENTED_EDGE('',*,*,#77259,.T.); +#77259 = EDGE_CURVE('',#77229,#77260,#77262,.T.); +#77260 = VERTEX_POINT('',#77261); +#77261 = CARTESIAN_POINT('',(3.35,-7.6392,2.219)); +#77262 = LINE('',#77263,#77264); +#77263 = CARTESIAN_POINT('',(3.35,-5.6792,2.219)); +#77264 = VECTOR('',#77265,1.); +#77265 = DIRECTION('',(0.,-1.,0.)); +#77266 = ORIENTED_EDGE('',*,*,#77267,.F.); +#77267 = EDGE_CURVE('',#77268,#77260,#77270,.T.); +#77268 = VERTEX_POINT('',#77269); +#77269 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77270 = LINE('',#77271,#77272); +#77271 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77272 = VECTOR('',#77273,1.); +#77273 = DIRECTION('',(0.,0.,1.)); +#77274 = ORIENTED_EDGE('',*,*,#77275,.F.); +#77275 = EDGE_CURVE('',#77237,#77268,#77276,.T.); +#77276 = LINE('',#77277,#77278); +#77277 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77278 = VECTOR('',#77279,1.); +#77279 = DIRECTION('',(0.,-1.,0.)); +#77280 = PLANE('',#77281); +#77281 = AXIS2_PLACEMENT_3D('',#77282,#77283,#77284); +#77282 = CARTESIAN_POINT('',(3.35,-5.6792,2.17)); +#77283 = DIRECTION('',(1.,0.,0.)); +#77284 = DIRECTION('',(0.,-1.,0.)); +#77285 = ADVANCED_FACE('',(#77286),#77311,.T.); +#77286 = FACE_BOUND('',#77287,.T.); +#77287 = EDGE_LOOP('',(#77288,#77289,#77297,#77305)); +#77288 = ORIENTED_EDGE('',*,*,#77267,.T.); +#77289 = ORIENTED_EDGE('',*,*,#77290,.T.); +#77290 = EDGE_CURVE('',#77260,#77291,#77293,.T.); +#77291 = VERTEX_POINT('',#77292); +#77292 = CARTESIAN_POINT('',(3.1,-7.6392,2.219)); +#77293 = LINE('',#77294,#77295); +#77294 = CARTESIAN_POINT('',(3.35,-7.6392,2.219)); +#77295 = VECTOR('',#77296,1.); +#77296 = DIRECTION('',(-1.,0.,0.)); +#77297 = ORIENTED_EDGE('',*,*,#77298,.F.); +#77298 = EDGE_CURVE('',#77299,#77291,#77301,.T.); +#77299 = VERTEX_POINT('',#77300); +#77300 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77301 = LINE('',#77302,#77303); +#77302 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77303 = VECTOR('',#77304,1.); +#77304 = DIRECTION('',(0.,0.,1.)); +#77305 = ORIENTED_EDGE('',*,*,#77306,.F.); +#77306 = EDGE_CURVE('',#77268,#77299,#77307,.T.); +#77307 = LINE('',#77308,#77309); +#77308 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77309 = VECTOR('',#77310,1.); +#77310 = DIRECTION('',(-1.,0.,0.)); +#77311 = PLANE('',#77312); +#77312 = AXIS2_PLACEMENT_3D('',#77313,#77314,#77315); +#77313 = CARTESIAN_POINT('',(3.35,-7.6392,2.17)); +#77314 = DIRECTION('',(0.,-1.,0.)); +#77315 = DIRECTION('',(-1.,0.,0.)); +#77316 = ADVANCED_FACE('',(#77317),#77333,.T.); +#77317 = FACE_BOUND('',#77318,.T.); +#77318 = EDGE_LOOP('',(#77319,#77320,#77326,#77327)); +#77319 = ORIENTED_EDGE('',*,*,#77298,.T.); +#77320 = ORIENTED_EDGE('',*,*,#77321,.T.); +#77321 = EDGE_CURVE('',#77291,#77221,#77322,.T.); +#77322 = LINE('',#77323,#77324); +#77323 = CARTESIAN_POINT('',(3.1,-7.6392,2.219)); +#77324 = VECTOR('',#77325,1.); +#77325 = DIRECTION('',(0.,1.,0.)); +#77326 = ORIENTED_EDGE('',*,*,#77218,.F.); +#77327 = ORIENTED_EDGE('',*,*,#77328,.F.); +#77328 = EDGE_CURVE('',#77299,#77219,#77329,.T.); +#77329 = LINE('',#77330,#77331); +#77330 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77331 = VECTOR('',#77332,1.); +#77332 = DIRECTION('',(0.,1.,0.)); +#77333 = PLANE('',#77334); +#77334 = AXIS2_PLACEMENT_3D('',#77335,#77336,#77337); +#77335 = CARTESIAN_POINT('',(3.1,-7.6392,2.17)); +#77336 = DIRECTION('',(-1.,0.,0.)); +#77337 = DIRECTION('',(0.,1.,0.)); +#77338 = ADVANCED_FACE('',(#77339),#77345,.F.); +#77339 = FACE_BOUND('',#77340,.T.); +#77340 = EDGE_LOOP('',(#77341,#77342,#77343,#77344)); +#77341 = ORIENTED_EDGE('',*,*,#77244,.T.); +#77342 = ORIENTED_EDGE('',*,*,#77275,.T.); +#77343 = ORIENTED_EDGE('',*,*,#77306,.T.); +#77344 = ORIENTED_EDGE('',*,*,#77328,.T.); +#77345 = PLANE('',#77346); +#77346 = AXIS2_PLACEMENT_3D('',#77347,#77348,#77349); +#77347 = CARTESIAN_POINT('',(3.225,-6.6592,2.17)); +#77348 = DIRECTION('',(0.,0.,1.)); +#77349 = DIRECTION('',(1.,0.,-0.)); +#77350 = ADVANCED_FACE('',(#77351),#77357,.T.); +#77351 = FACE_BOUND('',#77352,.F.); +#77352 = EDGE_LOOP('',(#77353,#77354,#77355,#77356)); +#77353 = ORIENTED_EDGE('',*,*,#77228,.T.); +#77354 = ORIENTED_EDGE('',*,*,#77259,.T.); +#77355 = ORIENTED_EDGE('',*,*,#77290,.T.); +#77356 = ORIENTED_EDGE('',*,*,#77321,.T.); +#77357 = PLANE('',#77358); +#77358 = AXIS2_PLACEMENT_3D('',#77359,#77360,#77361); +#77359 = CARTESIAN_POINT('',(3.225,-6.6592,2.219)); +#77360 = DIRECTION('',(0.,0.,1.)); +#77361 = DIRECTION('',(1.,0.,-0.)); +#77362 = MANIFOLD_SOLID_BREP('',#77363); +#77363 = CLOSED_SHELL('',(#77364,#77404,#77435,#77466,#77488,#77500)); +#77364 = ADVANCED_FACE('',(#77365),#77399,.T.); +#77365 = FACE_BOUND('',#77366,.T.); +#77366 = EDGE_LOOP('',(#77367,#77377,#77385,#77393)); +#77367 = ORIENTED_EDGE('',*,*,#77368,.T.); +#77368 = EDGE_CURVE('',#77369,#77371,#77373,.T.); +#77369 = VERTEX_POINT('',#77370); +#77370 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77371 = VERTEX_POINT('',#77372); +#77372 = CARTESIAN_POINT('',(3.1,-5.6792,1.568)); +#77373 = LINE('',#77374,#77375); +#77374 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77375 = VECTOR('',#77376,1.); +#77376 = DIRECTION('',(0.,0.,1.)); +#77377 = ORIENTED_EDGE('',*,*,#77378,.T.); +#77378 = EDGE_CURVE('',#77371,#77379,#77381,.T.); +#77379 = VERTEX_POINT('',#77380); +#77380 = CARTESIAN_POINT('',(3.35,-5.6792,1.568)); +#77381 = LINE('',#77382,#77383); +#77382 = CARTESIAN_POINT('',(3.1,-5.6792,1.568)); +#77383 = VECTOR('',#77384,1.); +#77384 = DIRECTION('',(1.,0.,0.)); +#77385 = ORIENTED_EDGE('',*,*,#77386,.F.); +#77386 = EDGE_CURVE('',#77387,#77379,#77389,.T.); +#77387 = VERTEX_POINT('',#77388); +#77388 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77389 = LINE('',#77390,#77391); +#77390 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77391 = VECTOR('',#77392,1.); +#77392 = DIRECTION('',(0.,0.,1.)); +#77393 = ORIENTED_EDGE('',*,*,#77394,.F.); +#77394 = EDGE_CURVE('',#77369,#77387,#77395,.T.); +#77395 = LINE('',#77396,#77397); +#77396 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77397 = VECTOR('',#77398,1.); +#77398 = DIRECTION('',(1.,0.,0.)); +#77399 = PLANE('',#77400); +#77400 = AXIS2_PLACEMENT_3D('',#77401,#77402,#77403); +#77401 = CARTESIAN_POINT('',(3.1,-5.6792,1.519)); +#77402 = DIRECTION('',(0.,1.,0.)); +#77403 = DIRECTION('',(1.,0.,0.)); +#77404 = ADVANCED_FACE('',(#77405),#77430,.T.); +#77405 = FACE_BOUND('',#77406,.T.); +#77406 = EDGE_LOOP('',(#77407,#77408,#77416,#77424)); +#77407 = ORIENTED_EDGE('',*,*,#77386,.T.); +#77408 = ORIENTED_EDGE('',*,*,#77409,.T.); +#77409 = EDGE_CURVE('',#77379,#77410,#77412,.T.); +#77410 = VERTEX_POINT('',#77411); +#77411 = CARTESIAN_POINT('',(3.35,-7.6392,1.568)); +#77412 = LINE('',#77413,#77414); +#77413 = CARTESIAN_POINT('',(3.35,-5.6792,1.568)); +#77414 = VECTOR('',#77415,1.); +#77415 = DIRECTION('',(0.,-1.,0.)); +#77416 = ORIENTED_EDGE('',*,*,#77417,.F.); +#77417 = EDGE_CURVE('',#77418,#77410,#77420,.T.); +#77418 = VERTEX_POINT('',#77419); +#77419 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77420 = LINE('',#77421,#77422); +#77421 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77422 = VECTOR('',#77423,1.); +#77423 = DIRECTION('',(0.,0.,1.)); +#77424 = ORIENTED_EDGE('',*,*,#77425,.F.); +#77425 = EDGE_CURVE('',#77387,#77418,#77426,.T.); +#77426 = LINE('',#77427,#77428); +#77427 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77428 = VECTOR('',#77429,1.); +#77429 = DIRECTION('',(0.,-1.,0.)); +#77430 = PLANE('',#77431); +#77431 = AXIS2_PLACEMENT_3D('',#77432,#77433,#77434); +#77432 = CARTESIAN_POINT('',(3.35,-5.6792,1.519)); +#77433 = DIRECTION('',(1.,0.,0.)); +#77434 = DIRECTION('',(0.,-1.,0.)); +#77435 = ADVANCED_FACE('',(#77436),#77461,.T.); +#77436 = FACE_BOUND('',#77437,.T.); +#77437 = EDGE_LOOP('',(#77438,#77439,#77447,#77455)); +#77438 = ORIENTED_EDGE('',*,*,#77417,.T.); +#77439 = ORIENTED_EDGE('',*,*,#77440,.T.); +#77440 = EDGE_CURVE('',#77410,#77441,#77443,.T.); +#77441 = VERTEX_POINT('',#77442); +#77442 = CARTESIAN_POINT('',(3.1,-7.6392,1.568)); +#77443 = LINE('',#77444,#77445); +#77444 = CARTESIAN_POINT('',(3.35,-7.6392,1.568)); +#77445 = VECTOR('',#77446,1.); +#77446 = DIRECTION('',(-1.,0.,0.)); +#77447 = ORIENTED_EDGE('',*,*,#77448,.F.); +#77448 = EDGE_CURVE('',#77449,#77441,#77451,.T.); +#77449 = VERTEX_POINT('',#77450); +#77450 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77451 = LINE('',#77452,#77453); +#77452 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77453 = VECTOR('',#77454,1.); +#77454 = DIRECTION('',(0.,0.,1.)); +#77455 = ORIENTED_EDGE('',*,*,#77456,.F.); +#77456 = EDGE_CURVE('',#77418,#77449,#77457,.T.); +#77457 = LINE('',#77458,#77459); +#77458 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77459 = VECTOR('',#77460,1.); +#77460 = DIRECTION('',(-1.,0.,0.)); +#77461 = PLANE('',#77462); +#77462 = AXIS2_PLACEMENT_3D('',#77463,#77464,#77465); +#77463 = CARTESIAN_POINT('',(3.35,-7.6392,1.519)); +#77464 = DIRECTION('',(0.,-1.,0.)); +#77465 = DIRECTION('',(-1.,0.,0.)); +#77466 = ADVANCED_FACE('',(#77467),#77483,.T.); +#77467 = FACE_BOUND('',#77468,.T.); +#77468 = EDGE_LOOP('',(#77469,#77470,#77476,#77477)); +#77469 = ORIENTED_EDGE('',*,*,#77448,.T.); +#77470 = ORIENTED_EDGE('',*,*,#77471,.T.); +#77471 = EDGE_CURVE('',#77441,#77371,#77472,.T.); +#77472 = LINE('',#77473,#77474); +#77473 = CARTESIAN_POINT('',(3.1,-7.6392,1.568)); +#77474 = VECTOR('',#77475,1.); +#77475 = DIRECTION('',(0.,1.,0.)); +#77476 = ORIENTED_EDGE('',*,*,#77368,.F.); +#77477 = ORIENTED_EDGE('',*,*,#77478,.F.); +#77478 = EDGE_CURVE('',#77449,#77369,#77479,.T.); +#77479 = LINE('',#77480,#77481); +#77480 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77481 = VECTOR('',#77482,1.); +#77482 = DIRECTION('',(0.,1.,0.)); +#77483 = PLANE('',#77484); +#77484 = AXIS2_PLACEMENT_3D('',#77485,#77486,#77487); +#77485 = CARTESIAN_POINT('',(3.1,-7.6392,1.519)); +#77486 = DIRECTION('',(-1.,0.,0.)); +#77487 = DIRECTION('',(0.,1.,0.)); +#77488 = ADVANCED_FACE('',(#77489),#77495,.F.); +#77489 = FACE_BOUND('',#77490,.T.); +#77490 = EDGE_LOOP('',(#77491,#77492,#77493,#77494)); +#77491 = ORIENTED_EDGE('',*,*,#77394,.T.); +#77492 = ORIENTED_EDGE('',*,*,#77425,.T.); +#77493 = ORIENTED_EDGE('',*,*,#77456,.T.); +#77494 = ORIENTED_EDGE('',*,*,#77478,.T.); +#77495 = PLANE('',#77496); +#77496 = AXIS2_PLACEMENT_3D('',#77497,#77498,#77499); +#77497 = CARTESIAN_POINT('',(3.225,-6.6592,1.519)); +#77498 = DIRECTION('',(0.,0.,1.)); +#77499 = DIRECTION('',(1.,0.,-0.)); +#77500 = ADVANCED_FACE('',(#77501),#77507,.T.); +#77501 = FACE_BOUND('',#77502,.F.); +#77502 = EDGE_LOOP('',(#77503,#77504,#77505,#77506)); +#77503 = ORIENTED_EDGE('',*,*,#77378,.T.); +#77504 = ORIENTED_EDGE('',*,*,#77409,.T.); +#77505 = ORIENTED_EDGE('',*,*,#77440,.T.); +#77506 = ORIENTED_EDGE('',*,*,#77471,.T.); +#77507 = PLANE('',#77508); +#77508 = AXIS2_PLACEMENT_3D('',#77509,#77510,#77511); +#77509 = CARTESIAN_POINT('',(3.225,-6.6592,1.568)); +#77510 = DIRECTION('',(0.,0.,1.)); +#77511 = DIRECTION('',(1.,0.,-0.)); +#77512 = MANIFOLD_SOLID_BREP('',#77513); +#77513 = CLOSED_SHELL('',(#77514,#77554,#77585,#77616,#77638,#77650)); +#77514 = ADVANCED_FACE('',(#77515),#77549,.T.); +#77515 = FACE_BOUND('',#77516,.T.); +#77516 = EDGE_LOOP('',(#77517,#77527,#77535,#77543)); +#77517 = ORIENTED_EDGE('',*,*,#77518,.T.); +#77518 = EDGE_CURVE('',#77519,#77521,#77523,.T.); +#77519 = VERTEX_POINT('',#77520); +#77520 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77521 = VERTEX_POINT('',#77522); +#77522 = CARTESIAN_POINT('',(3.6,-5.6792,2.219)); +#77523 = LINE('',#77524,#77525); +#77524 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77525 = VECTOR('',#77526,1.); +#77526 = DIRECTION('',(0.,0.,1.)); +#77527 = ORIENTED_EDGE('',*,*,#77528,.T.); +#77528 = EDGE_CURVE('',#77521,#77529,#77531,.T.); +#77529 = VERTEX_POINT('',#77530); +#77530 = CARTESIAN_POINT('',(3.85,-5.6792,2.219)); +#77531 = LINE('',#77532,#77533); +#77532 = CARTESIAN_POINT('',(3.6,-5.6792,2.219)); +#77533 = VECTOR('',#77534,1.); +#77534 = DIRECTION('',(1.,0.,0.)); +#77535 = ORIENTED_EDGE('',*,*,#77536,.F.); +#77536 = EDGE_CURVE('',#77537,#77529,#77539,.T.); +#77537 = VERTEX_POINT('',#77538); +#77538 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77539 = LINE('',#77540,#77541); +#77540 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77541 = VECTOR('',#77542,1.); +#77542 = DIRECTION('',(0.,0.,1.)); +#77543 = ORIENTED_EDGE('',*,*,#77544,.F.); +#77544 = EDGE_CURVE('',#77519,#77537,#77545,.T.); +#77545 = LINE('',#77546,#77547); +#77546 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77547 = VECTOR('',#77548,1.); +#77548 = DIRECTION('',(1.,0.,0.)); +#77549 = PLANE('',#77550); +#77550 = AXIS2_PLACEMENT_3D('',#77551,#77552,#77553); +#77551 = CARTESIAN_POINT('',(3.6,-5.6792,2.17)); +#77552 = DIRECTION('',(0.,1.,0.)); +#77553 = DIRECTION('',(1.,0.,0.)); +#77554 = ADVANCED_FACE('',(#77555),#77580,.T.); +#77555 = FACE_BOUND('',#77556,.T.); +#77556 = EDGE_LOOP('',(#77557,#77558,#77566,#77574)); +#77557 = ORIENTED_EDGE('',*,*,#77536,.T.); +#77558 = ORIENTED_EDGE('',*,*,#77559,.T.); +#77559 = EDGE_CURVE('',#77529,#77560,#77562,.T.); +#77560 = VERTEX_POINT('',#77561); +#77561 = CARTESIAN_POINT('',(3.85,-7.6392,2.219)); +#77562 = LINE('',#77563,#77564); +#77563 = CARTESIAN_POINT('',(3.85,-5.6792,2.219)); +#77564 = VECTOR('',#77565,1.); +#77565 = DIRECTION('',(0.,-1.,0.)); +#77566 = ORIENTED_EDGE('',*,*,#77567,.F.); +#77567 = EDGE_CURVE('',#77568,#77560,#77570,.T.); +#77568 = VERTEX_POINT('',#77569); +#77569 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77570 = LINE('',#77571,#77572); +#77571 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77572 = VECTOR('',#77573,1.); +#77573 = DIRECTION('',(0.,0.,1.)); +#77574 = ORIENTED_EDGE('',*,*,#77575,.F.); +#77575 = EDGE_CURVE('',#77537,#77568,#77576,.T.); +#77576 = LINE('',#77577,#77578); +#77577 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77578 = VECTOR('',#77579,1.); +#77579 = DIRECTION('',(0.,-1.,0.)); +#77580 = PLANE('',#77581); +#77581 = AXIS2_PLACEMENT_3D('',#77582,#77583,#77584); +#77582 = CARTESIAN_POINT('',(3.85,-5.6792,2.17)); +#77583 = DIRECTION('',(1.,0.,0.)); +#77584 = DIRECTION('',(0.,-1.,0.)); +#77585 = ADVANCED_FACE('',(#77586),#77611,.T.); +#77586 = FACE_BOUND('',#77587,.T.); +#77587 = EDGE_LOOP('',(#77588,#77589,#77597,#77605)); +#77588 = ORIENTED_EDGE('',*,*,#77567,.T.); +#77589 = ORIENTED_EDGE('',*,*,#77590,.T.); +#77590 = EDGE_CURVE('',#77560,#77591,#77593,.T.); +#77591 = VERTEX_POINT('',#77592); +#77592 = CARTESIAN_POINT('',(3.6,-7.6392,2.219)); +#77593 = LINE('',#77594,#77595); +#77594 = CARTESIAN_POINT('',(3.85,-7.6392,2.219)); +#77595 = VECTOR('',#77596,1.); +#77596 = DIRECTION('',(-1.,0.,0.)); +#77597 = ORIENTED_EDGE('',*,*,#77598,.F.); +#77598 = EDGE_CURVE('',#77599,#77591,#77601,.T.); +#77599 = VERTEX_POINT('',#77600); +#77600 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77601 = LINE('',#77602,#77603); +#77602 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77603 = VECTOR('',#77604,1.); +#77604 = DIRECTION('',(0.,0.,1.)); +#77605 = ORIENTED_EDGE('',*,*,#77606,.F.); +#77606 = EDGE_CURVE('',#77568,#77599,#77607,.T.); +#77607 = LINE('',#77608,#77609); +#77608 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77609 = VECTOR('',#77610,1.); +#77610 = DIRECTION('',(-1.,0.,0.)); +#77611 = PLANE('',#77612); +#77612 = AXIS2_PLACEMENT_3D('',#77613,#77614,#77615); +#77613 = CARTESIAN_POINT('',(3.85,-7.6392,2.17)); +#77614 = DIRECTION('',(0.,-1.,0.)); +#77615 = DIRECTION('',(-1.,0.,0.)); +#77616 = ADVANCED_FACE('',(#77617),#77633,.T.); +#77617 = FACE_BOUND('',#77618,.T.); +#77618 = EDGE_LOOP('',(#77619,#77620,#77626,#77627)); +#77619 = ORIENTED_EDGE('',*,*,#77598,.T.); +#77620 = ORIENTED_EDGE('',*,*,#77621,.T.); +#77621 = EDGE_CURVE('',#77591,#77521,#77622,.T.); +#77622 = LINE('',#77623,#77624); +#77623 = CARTESIAN_POINT('',(3.6,-7.6392,2.219)); +#77624 = VECTOR('',#77625,1.); +#77625 = DIRECTION('',(0.,1.,0.)); +#77626 = ORIENTED_EDGE('',*,*,#77518,.F.); +#77627 = ORIENTED_EDGE('',*,*,#77628,.F.); +#77628 = EDGE_CURVE('',#77599,#77519,#77629,.T.); +#77629 = LINE('',#77630,#77631); +#77630 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77631 = VECTOR('',#77632,1.); +#77632 = DIRECTION('',(0.,1.,0.)); +#77633 = PLANE('',#77634); +#77634 = AXIS2_PLACEMENT_3D('',#77635,#77636,#77637); +#77635 = CARTESIAN_POINT('',(3.6,-7.6392,2.17)); +#77636 = DIRECTION('',(-1.,0.,0.)); +#77637 = DIRECTION('',(0.,1.,0.)); +#77638 = ADVANCED_FACE('',(#77639),#77645,.F.); +#77639 = FACE_BOUND('',#77640,.T.); +#77640 = EDGE_LOOP('',(#77641,#77642,#77643,#77644)); +#77641 = ORIENTED_EDGE('',*,*,#77544,.T.); +#77642 = ORIENTED_EDGE('',*,*,#77575,.T.); +#77643 = ORIENTED_EDGE('',*,*,#77606,.T.); +#77644 = ORIENTED_EDGE('',*,*,#77628,.T.); +#77645 = PLANE('',#77646); +#77646 = AXIS2_PLACEMENT_3D('',#77647,#77648,#77649); +#77647 = CARTESIAN_POINT('',(3.725,-6.6592,2.17)); +#77648 = DIRECTION('',(0.,0.,1.)); +#77649 = DIRECTION('',(1.,0.,-0.)); +#77650 = ADVANCED_FACE('',(#77651),#77657,.T.); +#77651 = FACE_BOUND('',#77652,.F.); +#77652 = EDGE_LOOP('',(#77653,#77654,#77655,#77656)); +#77653 = ORIENTED_EDGE('',*,*,#77528,.T.); +#77654 = ORIENTED_EDGE('',*,*,#77559,.T.); +#77655 = ORIENTED_EDGE('',*,*,#77590,.T.); +#77656 = ORIENTED_EDGE('',*,*,#77621,.T.); +#77657 = PLANE('',#77658); +#77658 = AXIS2_PLACEMENT_3D('',#77659,#77660,#77661); +#77659 = CARTESIAN_POINT('',(3.725,-6.6592,2.219)); +#77660 = DIRECTION('',(0.,0.,1.)); +#77661 = DIRECTION('',(1.,0.,-0.)); +#77662 = MANIFOLD_SOLID_BREP('',#77663); +#77663 = CLOSED_SHELL('',(#77664,#77704,#77735,#77766,#77788,#77800)); +#77664 = ADVANCED_FACE('',(#77665),#77699,.T.); +#77665 = FACE_BOUND('',#77666,.T.); +#77666 = EDGE_LOOP('',(#77667,#77677,#77685,#77693)); +#77667 = ORIENTED_EDGE('',*,*,#77668,.T.); +#77668 = EDGE_CURVE('',#77669,#77671,#77673,.T.); +#77669 = VERTEX_POINT('',#77670); +#77670 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77671 = VERTEX_POINT('',#77672); +#77672 = CARTESIAN_POINT('',(3.6,-5.6792,1.568)); +#77673 = LINE('',#77674,#77675); +#77674 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77675 = VECTOR('',#77676,1.); +#77676 = DIRECTION('',(0.,0.,1.)); +#77677 = ORIENTED_EDGE('',*,*,#77678,.T.); +#77678 = EDGE_CURVE('',#77671,#77679,#77681,.T.); +#77679 = VERTEX_POINT('',#77680); +#77680 = CARTESIAN_POINT('',(3.85,-5.6792,1.568)); +#77681 = LINE('',#77682,#77683); +#77682 = CARTESIAN_POINT('',(3.6,-5.6792,1.568)); +#77683 = VECTOR('',#77684,1.); +#77684 = DIRECTION('',(1.,0.,0.)); +#77685 = ORIENTED_EDGE('',*,*,#77686,.F.); +#77686 = EDGE_CURVE('',#77687,#77679,#77689,.T.); +#77687 = VERTEX_POINT('',#77688); +#77688 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77689 = LINE('',#77690,#77691); +#77690 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77691 = VECTOR('',#77692,1.); +#77692 = DIRECTION('',(0.,0.,1.)); +#77693 = ORIENTED_EDGE('',*,*,#77694,.F.); +#77694 = EDGE_CURVE('',#77669,#77687,#77695,.T.); +#77695 = LINE('',#77696,#77697); +#77696 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77697 = VECTOR('',#77698,1.); +#77698 = DIRECTION('',(1.,0.,0.)); +#77699 = PLANE('',#77700); +#77700 = AXIS2_PLACEMENT_3D('',#77701,#77702,#77703); +#77701 = CARTESIAN_POINT('',(3.6,-5.6792,1.519)); +#77702 = DIRECTION('',(0.,1.,0.)); +#77703 = DIRECTION('',(1.,0.,0.)); +#77704 = ADVANCED_FACE('',(#77705),#77730,.T.); +#77705 = FACE_BOUND('',#77706,.T.); +#77706 = EDGE_LOOP('',(#77707,#77708,#77716,#77724)); +#77707 = ORIENTED_EDGE('',*,*,#77686,.T.); +#77708 = ORIENTED_EDGE('',*,*,#77709,.T.); +#77709 = EDGE_CURVE('',#77679,#77710,#77712,.T.); +#77710 = VERTEX_POINT('',#77711); +#77711 = CARTESIAN_POINT('',(3.85,-7.6392,1.568)); +#77712 = LINE('',#77713,#77714); +#77713 = CARTESIAN_POINT('',(3.85,-5.6792,1.568)); +#77714 = VECTOR('',#77715,1.); +#77715 = DIRECTION('',(0.,-1.,0.)); +#77716 = ORIENTED_EDGE('',*,*,#77717,.F.); +#77717 = EDGE_CURVE('',#77718,#77710,#77720,.T.); +#77718 = VERTEX_POINT('',#77719); +#77719 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77720 = LINE('',#77721,#77722); +#77721 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77722 = VECTOR('',#77723,1.); +#77723 = DIRECTION('',(0.,0.,1.)); +#77724 = ORIENTED_EDGE('',*,*,#77725,.F.); +#77725 = EDGE_CURVE('',#77687,#77718,#77726,.T.); +#77726 = LINE('',#77727,#77728); +#77727 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77728 = VECTOR('',#77729,1.); +#77729 = DIRECTION('',(0.,-1.,0.)); +#77730 = PLANE('',#77731); +#77731 = AXIS2_PLACEMENT_3D('',#77732,#77733,#77734); +#77732 = CARTESIAN_POINT('',(3.85,-5.6792,1.519)); +#77733 = DIRECTION('',(1.,0.,0.)); +#77734 = DIRECTION('',(0.,-1.,0.)); +#77735 = ADVANCED_FACE('',(#77736),#77761,.T.); +#77736 = FACE_BOUND('',#77737,.T.); +#77737 = EDGE_LOOP('',(#77738,#77739,#77747,#77755)); +#77738 = ORIENTED_EDGE('',*,*,#77717,.T.); +#77739 = ORIENTED_EDGE('',*,*,#77740,.T.); +#77740 = EDGE_CURVE('',#77710,#77741,#77743,.T.); +#77741 = VERTEX_POINT('',#77742); +#77742 = CARTESIAN_POINT('',(3.6,-7.6392,1.568)); +#77743 = LINE('',#77744,#77745); +#77744 = CARTESIAN_POINT('',(3.85,-7.6392,1.568)); +#77745 = VECTOR('',#77746,1.); +#77746 = DIRECTION('',(-1.,0.,0.)); +#77747 = ORIENTED_EDGE('',*,*,#77748,.F.); +#77748 = EDGE_CURVE('',#77749,#77741,#77751,.T.); +#77749 = VERTEX_POINT('',#77750); +#77750 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77751 = LINE('',#77752,#77753); +#77752 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77753 = VECTOR('',#77754,1.); +#77754 = DIRECTION('',(0.,0.,1.)); +#77755 = ORIENTED_EDGE('',*,*,#77756,.F.); +#77756 = EDGE_CURVE('',#77718,#77749,#77757,.T.); +#77757 = LINE('',#77758,#77759); +#77758 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77759 = VECTOR('',#77760,1.); +#77760 = DIRECTION('',(-1.,0.,0.)); +#77761 = PLANE('',#77762); +#77762 = AXIS2_PLACEMENT_3D('',#77763,#77764,#77765); +#77763 = CARTESIAN_POINT('',(3.85,-7.6392,1.519)); +#77764 = DIRECTION('',(0.,-1.,0.)); +#77765 = DIRECTION('',(-1.,0.,0.)); +#77766 = ADVANCED_FACE('',(#77767),#77783,.T.); +#77767 = FACE_BOUND('',#77768,.T.); +#77768 = EDGE_LOOP('',(#77769,#77770,#77776,#77777)); +#77769 = ORIENTED_EDGE('',*,*,#77748,.T.); +#77770 = ORIENTED_EDGE('',*,*,#77771,.T.); +#77771 = EDGE_CURVE('',#77741,#77671,#77772,.T.); +#77772 = LINE('',#77773,#77774); +#77773 = CARTESIAN_POINT('',(3.6,-7.6392,1.568)); +#77774 = VECTOR('',#77775,1.); +#77775 = DIRECTION('',(0.,1.,0.)); +#77776 = ORIENTED_EDGE('',*,*,#77668,.F.); +#77777 = ORIENTED_EDGE('',*,*,#77778,.F.); +#77778 = EDGE_CURVE('',#77749,#77669,#77779,.T.); +#77779 = LINE('',#77780,#77781); +#77780 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77781 = VECTOR('',#77782,1.); +#77782 = DIRECTION('',(0.,1.,0.)); +#77783 = PLANE('',#77784); +#77784 = AXIS2_PLACEMENT_3D('',#77785,#77786,#77787); +#77785 = CARTESIAN_POINT('',(3.6,-7.6392,1.519)); +#77786 = DIRECTION('',(-1.,0.,0.)); +#77787 = DIRECTION('',(0.,1.,0.)); +#77788 = ADVANCED_FACE('',(#77789),#77795,.F.); +#77789 = FACE_BOUND('',#77790,.T.); +#77790 = EDGE_LOOP('',(#77791,#77792,#77793,#77794)); +#77791 = ORIENTED_EDGE('',*,*,#77694,.T.); +#77792 = ORIENTED_EDGE('',*,*,#77725,.T.); +#77793 = ORIENTED_EDGE('',*,*,#77756,.T.); +#77794 = ORIENTED_EDGE('',*,*,#77778,.T.); +#77795 = PLANE('',#77796); +#77796 = AXIS2_PLACEMENT_3D('',#77797,#77798,#77799); +#77797 = CARTESIAN_POINT('',(3.725,-6.6592,1.519)); +#77798 = DIRECTION('',(0.,0.,1.)); +#77799 = DIRECTION('',(1.,0.,-0.)); +#77800 = ADVANCED_FACE('',(#77801),#77807,.T.); +#77801 = FACE_BOUND('',#77802,.F.); +#77802 = EDGE_LOOP('',(#77803,#77804,#77805,#77806)); +#77803 = ORIENTED_EDGE('',*,*,#77678,.T.); +#77804 = ORIENTED_EDGE('',*,*,#77709,.T.); +#77805 = ORIENTED_EDGE('',*,*,#77740,.T.); +#77806 = ORIENTED_EDGE('',*,*,#77771,.T.); +#77807 = PLANE('',#77808); +#77808 = AXIS2_PLACEMENT_3D('',#77809,#77810,#77811); +#77809 = CARTESIAN_POINT('',(3.725,-6.6592,1.568)); +#77810 = DIRECTION('',(0.,0.,1.)); +#77811 = DIRECTION('',(1.,0.,-0.)); +#77812 = MANIFOLD_SOLID_BREP('',#77813); +#77813 = CLOSED_SHELL('',(#77814,#77870,#77901,#77925,#77949,#77973, + #77997,#78014)); +#77814 = ADVANCED_FACE('',(#77815),#77865,.F.); +#77815 = FACE_BOUND('',#77816,.F.); +#77816 = EDGE_LOOP('',(#77817,#77827,#77835,#77843,#77851,#77859)); +#77817 = ORIENTED_EDGE('',*,*,#77818,.T.); +#77818 = EDGE_CURVE('',#77819,#77821,#77823,.T.); +#77819 = VERTEX_POINT('',#77820); +#77820 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77821 = VERTEX_POINT('',#77822); +#77822 = CARTESIAN_POINT('',(0.11,-1.425,-1.41)); +#77823 = LINE('',#77824,#77825); +#77824 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77825 = VECTOR('',#77826,1.); +#77826 = DIRECTION('',(0.,0.,-1.)); +#77827 = ORIENTED_EDGE('',*,*,#77828,.T.); +#77828 = EDGE_CURVE('',#77821,#77829,#77831,.T.); +#77829 = VERTEX_POINT('',#77830); +#77830 = CARTESIAN_POINT('',(6.E-02,-1.425,-1.61)); +#77831 = LINE('',#77832,#77833); +#77832 = CARTESIAN_POINT('',(0.285735294118,-1.425,-0.707058823529)); +#77833 = VECTOR('',#77834,1.); +#77834 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#77835 = ORIENTED_EDGE('',*,*,#77836,.T.); +#77836 = EDGE_CURVE('',#77829,#77837,#77839,.T.); +#77837 = VERTEX_POINT('',#77838); +#77838 = CARTESIAN_POINT('',(-6.E-02,-1.425,-1.61)); +#77839 = LINE('',#77840,#77841); +#77840 = CARTESIAN_POINT('',(0.11,-1.425,-1.61)); +#77841 = VECTOR('',#77842,1.); +#77842 = DIRECTION('',(-1.,0.,0.)); +#77843 = ORIENTED_EDGE('',*,*,#77844,.F.); +#77844 = EDGE_CURVE('',#77845,#77837,#77847,.T.); +#77845 = VERTEX_POINT('',#77846); +#77846 = CARTESIAN_POINT('',(-0.11,-1.425,-1.41)); +#77847 = LINE('',#77848,#77849); +#77848 = CARTESIAN_POINT('',(-0.279264705882,-1.425,-0.732941176471)); +#77849 = VECTOR('',#77850,1.); +#77850 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#77851 = ORIENTED_EDGE('',*,*,#77852,.F.); +#77852 = EDGE_CURVE('',#77853,#77845,#77855,.T.); +#77853 = VERTEX_POINT('',#77854); +#77854 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77855 = LINE('',#77856,#77857); +#77856 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77857 = VECTOR('',#77858,1.); +#77858 = DIRECTION('',(0.,0.,-1.)); +#77859 = ORIENTED_EDGE('',*,*,#77860,.F.); +#77860 = EDGE_CURVE('',#77819,#77853,#77861,.T.); +#77861 = LINE('',#77862,#77863); +#77862 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77863 = VECTOR('',#77864,1.); +#77864 = DIRECTION('',(-1.,0.,0.)); +#77865 = PLANE('',#77866); +#77866 = AXIS2_PLACEMENT_3D('',#77867,#77868,#77869); +#77867 = CARTESIAN_POINT('',(0.11,-1.425,0.19)); +#77868 = DIRECTION('',(0.,1.,0.)); +#77869 = DIRECTION('',(-1.,0.,0.)); +#77870 = ADVANCED_FACE('',(#77871),#77896,.F.); +#77871 = FACE_BOUND('',#77872,.F.); +#77872 = EDGE_LOOP('',(#77873,#77883,#77889,#77890)); +#77873 = ORIENTED_EDGE('',*,*,#77874,.T.); +#77874 = EDGE_CURVE('',#77875,#77877,#77879,.T.); +#77875 = VERTEX_POINT('',#77876); +#77876 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77877 = VERTEX_POINT('',#77878); +#77878 = CARTESIAN_POINT('',(0.11,-1.275,-1.41)); +#77879 = LINE('',#77880,#77881); +#77880 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77881 = VECTOR('',#77882,1.); +#77882 = DIRECTION('',(0.,0.,-1.)); +#77883 = ORIENTED_EDGE('',*,*,#77884,.T.); +#77884 = EDGE_CURVE('',#77877,#77821,#77885,.T.); +#77885 = LINE('',#77886,#77887); +#77886 = CARTESIAN_POINT('',(0.11,-1.275,-1.41)); +#77887 = VECTOR('',#77888,1.); +#77888 = DIRECTION('',(0.,-1.,0.)); +#77889 = ORIENTED_EDGE('',*,*,#77818,.F.); +#77890 = ORIENTED_EDGE('',*,*,#77891,.F.); +#77891 = EDGE_CURVE('',#77875,#77819,#77892,.T.); +#77892 = LINE('',#77893,#77894); +#77893 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77894 = VECTOR('',#77895,1.); +#77895 = DIRECTION('',(0.,-1.,0.)); +#77896 = PLANE('',#77897); +#77897 = AXIS2_PLACEMENT_3D('',#77898,#77899,#77900); +#77898 = CARTESIAN_POINT('',(0.11,-1.275,0.19)); +#77899 = DIRECTION('',(-1.,-0.,-0.)); +#77900 = DIRECTION('',(0.,-1.,0.)); +#77901 = ADVANCED_FACE('',(#77902),#77920,.T.); +#77902 = FACE_BOUND('',#77903,.T.); +#77903 = EDGE_LOOP('',(#77904,#77912,#77913,#77914)); +#77904 = ORIENTED_EDGE('',*,*,#77905,.F.); +#77905 = EDGE_CURVE('',#77877,#77906,#77908,.T.); +#77906 = VERTEX_POINT('',#77907); +#77907 = CARTESIAN_POINT('',(6.E-02,-1.275,-1.61)); +#77908 = LINE('',#77909,#77910); +#77909 = CARTESIAN_POINT('',(0.279264705882,-1.275,-0.732941176471)); +#77910 = VECTOR('',#77911,1.); +#77911 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#77912 = ORIENTED_EDGE('',*,*,#77884,.T.); +#77913 = ORIENTED_EDGE('',*,*,#77828,.T.); +#77914 = ORIENTED_EDGE('',*,*,#77915,.F.); +#77915 = EDGE_CURVE('',#77906,#77829,#77916,.T.); +#77916 = LINE('',#77917,#77918); +#77917 = CARTESIAN_POINT('',(6.E-02,-1.275,-1.61)); +#77918 = VECTOR('',#77919,1.); +#77919 = DIRECTION('',(0.,-1.,0.)); +#77920 = PLANE('',#77921); +#77921 = AXIS2_PLACEMENT_3D('',#77922,#77923,#77924); +#77922 = CARTESIAN_POINT('',(8.5E-02,-1.275,-1.51)); +#77923 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#77924 = DIRECTION('',(0.,-1.,0.)); +#77925 = ADVANCED_FACE('',(#77926),#77944,.T.); +#77926 = FACE_BOUND('',#77927,.F.); +#77927 = EDGE_LOOP('',(#77928,#77929,#77937,#77943)); +#77928 = ORIENTED_EDGE('',*,*,#77860,.T.); +#77929 = ORIENTED_EDGE('',*,*,#77930,.T.); +#77930 = EDGE_CURVE('',#77853,#77931,#77933,.T.); +#77931 = VERTEX_POINT('',#77932); +#77932 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#77933 = LINE('',#77934,#77935); +#77934 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77935 = VECTOR('',#77936,1.); +#77936 = DIRECTION('',(0.,1.,0.)); +#77937 = ORIENTED_EDGE('',*,*,#77938,.T.); +#77938 = EDGE_CURVE('',#77931,#77875,#77939,.T.); +#77939 = LINE('',#77940,#77941); +#77940 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#77941 = VECTOR('',#77942,1.); +#77942 = DIRECTION('',(1.,0.,0.)); +#77943 = ORIENTED_EDGE('',*,*,#77891,.T.); +#77944 = PLANE('',#77945); +#77945 = AXIS2_PLACEMENT_3D('',#77946,#77947,#77948); +#77946 = CARTESIAN_POINT('',(0.,-1.35,0.19)); +#77947 = DIRECTION('',(0.,0.,1.)); +#77948 = DIRECTION('',(1.,0.,-0.)); +#77949 = ADVANCED_FACE('',(#77950),#77968,.F.); +#77950 = FACE_BOUND('',#77951,.F.); +#77951 = EDGE_LOOP('',(#77952,#77953,#77954,#77962)); +#77952 = ORIENTED_EDGE('',*,*,#77836,.F.); +#77953 = ORIENTED_EDGE('',*,*,#77915,.F.); +#77954 = ORIENTED_EDGE('',*,*,#77955,.F.); +#77955 = EDGE_CURVE('',#77956,#77906,#77958,.T.); +#77956 = VERTEX_POINT('',#77957); +#77957 = CARTESIAN_POINT('',(-6.E-02,-1.275,-1.61)); +#77958 = LINE('',#77959,#77960); +#77959 = CARTESIAN_POINT('',(-0.11,-1.275,-1.61)); +#77960 = VECTOR('',#77961,1.); +#77961 = DIRECTION('',(1.,0.,0.)); +#77962 = ORIENTED_EDGE('',*,*,#77963,.F.); +#77963 = EDGE_CURVE('',#77837,#77956,#77964,.T.); +#77964 = LINE('',#77965,#77966); +#77965 = CARTESIAN_POINT('',(-6.E-02,-1.425,-1.61)); +#77966 = VECTOR('',#77967,1.); +#77967 = DIRECTION('',(0.,1.,0.)); +#77968 = PLANE('',#77969); +#77969 = AXIS2_PLACEMENT_3D('',#77970,#77971,#77972); +#77970 = CARTESIAN_POINT('',(0.,-1.35,-1.61)); +#77971 = DIRECTION('',(0.,0.,1.)); +#77972 = DIRECTION('',(1.,0.,-0.)); +#77973 = ADVANCED_FACE('',(#77974),#77992,.F.); +#77974 = FACE_BOUND('',#77975,.F.); +#77975 = EDGE_LOOP('',(#77976,#77977,#77985,#77991)); +#77976 = ORIENTED_EDGE('',*,*,#77852,.T.); +#77977 = ORIENTED_EDGE('',*,*,#77978,.T.); +#77978 = EDGE_CURVE('',#77845,#77979,#77981,.T.); +#77979 = VERTEX_POINT('',#77980); +#77980 = CARTESIAN_POINT('',(-0.11,-1.275,-1.41)); +#77981 = LINE('',#77982,#77983); +#77982 = CARTESIAN_POINT('',(-0.11,-1.425,-1.41)); +#77983 = VECTOR('',#77984,1.); +#77984 = DIRECTION('',(0.,1.,0.)); +#77985 = ORIENTED_EDGE('',*,*,#77986,.F.); +#77986 = EDGE_CURVE('',#77931,#77979,#77987,.T.); +#77987 = LINE('',#77988,#77989); +#77988 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#77989 = VECTOR('',#77990,1.); +#77990 = DIRECTION('',(0.,0.,-1.)); +#77991 = ORIENTED_EDGE('',*,*,#77930,.F.); +#77992 = PLANE('',#77993); +#77993 = AXIS2_PLACEMENT_3D('',#77994,#77995,#77996); +#77994 = CARTESIAN_POINT('',(-0.11,-1.425,0.19)); +#77995 = DIRECTION('',(1.,0.,0.)); +#77996 = DIRECTION('',(-0.,1.,0.)); +#77997 = ADVANCED_FACE('',(#77998),#78009,.T.); +#77998 = FACE_BOUND('',#77999,.T.); +#77999 = EDGE_LOOP('',(#78000,#78001,#78002,#78008)); +#78000 = ORIENTED_EDGE('',*,*,#77844,.F.); +#78001 = ORIENTED_EDGE('',*,*,#77978,.T.); +#78002 = ORIENTED_EDGE('',*,*,#78003,.T.); +#78003 = EDGE_CURVE('',#77979,#77956,#78004,.T.); +#78004 = LINE('',#78005,#78006); +#78005 = CARTESIAN_POINT('',(-0.285735294118,-1.275,-0.707058823529)); +#78006 = VECTOR('',#78007,1.); +#78007 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78008 = ORIENTED_EDGE('',*,*,#77963,.F.); +#78009 = PLANE('',#78010); +#78010 = AXIS2_PLACEMENT_3D('',#78011,#78012,#78013); +#78011 = CARTESIAN_POINT('',(-8.5E-02,-1.425,-1.51)); +#78012 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78013 = DIRECTION('',(0.,1.,0.)); +#78014 = ADVANCED_FACE('',(#78015),#78023,.F.); +#78015 = FACE_BOUND('',#78016,.F.); +#78016 = EDGE_LOOP('',(#78017,#78018,#78019,#78020,#78021,#78022)); +#78017 = ORIENTED_EDGE('',*,*,#77986,.T.); +#78018 = ORIENTED_EDGE('',*,*,#78003,.T.); +#78019 = ORIENTED_EDGE('',*,*,#77955,.T.); +#78020 = ORIENTED_EDGE('',*,*,#77905,.F.); +#78021 = ORIENTED_EDGE('',*,*,#77874,.F.); +#78022 = ORIENTED_EDGE('',*,*,#77938,.F.); +#78023 = PLANE('',#78024); +#78024 = AXIS2_PLACEMENT_3D('',#78025,#78026,#78027); +#78025 = CARTESIAN_POINT('',(-0.11,-1.275,0.19)); +#78026 = DIRECTION('',(0.,-1.,0.)); +#78027 = DIRECTION('',(1.,0.,0.)); +#78028 = MANIFOLD_SOLID_BREP('',#78029); +#78029 = CLOSED_SHELL('',(#78030,#78086,#78117,#78141,#78165,#78189, + #78213,#78230)); +#78030 = ADVANCED_FACE('',(#78031),#78081,.F.); +#78031 = FACE_BOUND('',#78032,.F.); +#78032 = EDGE_LOOP('',(#78033,#78043,#78051,#78059,#78067,#78075)); +#78033 = ORIENTED_EDGE('',*,*,#78034,.T.); +#78034 = EDGE_CURVE('',#78035,#78037,#78039,.T.); +#78035 = VERTEX_POINT('',#78036); +#78036 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78037 = VERTEX_POINT('',#78038); +#78038 = CARTESIAN_POINT('',(0.11,-7.5E-02,-1.41)); +#78039 = LINE('',#78040,#78041); +#78040 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78041 = VECTOR('',#78042,1.); +#78042 = DIRECTION('',(0.,0.,-1.)); +#78043 = ORIENTED_EDGE('',*,*,#78044,.T.); +#78044 = EDGE_CURVE('',#78037,#78045,#78047,.T.); +#78045 = VERTEX_POINT('',#78046); +#78046 = CARTESIAN_POINT('',(6.E-02,-7.5E-02,-1.61)); +#78047 = LINE('',#78048,#78049); +#78048 = CARTESIAN_POINT('',(0.285735294118,-7.5E-02,-0.707058823529)); +#78049 = VECTOR('',#78050,1.); +#78050 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78051 = ORIENTED_EDGE('',*,*,#78052,.T.); +#78052 = EDGE_CURVE('',#78045,#78053,#78055,.T.); +#78053 = VERTEX_POINT('',#78054); +#78054 = CARTESIAN_POINT('',(-6.E-02,-7.5E-02,-1.61)); +#78055 = LINE('',#78056,#78057); +#78056 = CARTESIAN_POINT('',(0.11,-7.5E-02,-1.61)); +#78057 = VECTOR('',#78058,1.); +#78058 = DIRECTION('',(-1.,0.,0.)); +#78059 = ORIENTED_EDGE('',*,*,#78060,.F.); +#78060 = EDGE_CURVE('',#78061,#78053,#78063,.T.); +#78061 = VERTEX_POINT('',#78062); +#78062 = CARTESIAN_POINT('',(-0.11,-7.5E-02,-1.41)); +#78063 = LINE('',#78064,#78065); +#78064 = CARTESIAN_POINT('',(-0.279264705882,-7.5E-02,-0.732941176471)); +#78065 = VECTOR('',#78066,1.); +#78066 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78067 = ORIENTED_EDGE('',*,*,#78068,.F.); +#78068 = EDGE_CURVE('',#78069,#78061,#78071,.T.); +#78069 = VERTEX_POINT('',#78070); +#78070 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78071 = LINE('',#78072,#78073); +#78072 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78073 = VECTOR('',#78074,1.); +#78074 = DIRECTION('',(0.,0.,-1.)); +#78075 = ORIENTED_EDGE('',*,*,#78076,.F.); +#78076 = EDGE_CURVE('',#78035,#78069,#78077,.T.); +#78077 = LINE('',#78078,#78079); +#78078 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78079 = VECTOR('',#78080,1.); +#78080 = DIRECTION('',(-1.,0.,0.)); +#78081 = PLANE('',#78082); +#78082 = AXIS2_PLACEMENT_3D('',#78083,#78084,#78085); +#78083 = CARTESIAN_POINT('',(0.11,-7.5E-02,0.19)); +#78084 = DIRECTION('',(0.,1.,0.)); +#78085 = DIRECTION('',(-1.,0.,0.)); +#78086 = ADVANCED_FACE('',(#78087),#78112,.F.); +#78087 = FACE_BOUND('',#78088,.F.); +#78088 = EDGE_LOOP('',(#78089,#78099,#78105,#78106)); +#78089 = ORIENTED_EDGE('',*,*,#78090,.T.); +#78090 = EDGE_CURVE('',#78091,#78093,#78095,.T.); +#78091 = VERTEX_POINT('',#78092); +#78092 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78093 = VERTEX_POINT('',#78094); +#78094 = CARTESIAN_POINT('',(0.11,7.5E-02,-1.41)); +#78095 = LINE('',#78096,#78097); +#78096 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78097 = VECTOR('',#78098,1.); +#78098 = DIRECTION('',(0.,0.,-1.)); +#78099 = ORIENTED_EDGE('',*,*,#78100,.T.); +#78100 = EDGE_CURVE('',#78093,#78037,#78101,.T.); +#78101 = LINE('',#78102,#78103); +#78102 = CARTESIAN_POINT('',(0.11,7.5E-02,-1.41)); +#78103 = VECTOR('',#78104,1.); +#78104 = DIRECTION('',(0.,-1.,0.)); +#78105 = ORIENTED_EDGE('',*,*,#78034,.F.); +#78106 = ORIENTED_EDGE('',*,*,#78107,.F.); +#78107 = EDGE_CURVE('',#78091,#78035,#78108,.T.); +#78108 = LINE('',#78109,#78110); +#78109 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78110 = VECTOR('',#78111,1.); +#78111 = DIRECTION('',(0.,-1.,0.)); +#78112 = PLANE('',#78113); +#78113 = AXIS2_PLACEMENT_3D('',#78114,#78115,#78116); +#78114 = CARTESIAN_POINT('',(0.11,7.5E-02,0.19)); +#78115 = DIRECTION('',(-1.,-0.,-0.)); +#78116 = DIRECTION('',(0.,-1.,0.)); +#78117 = ADVANCED_FACE('',(#78118),#78136,.T.); +#78118 = FACE_BOUND('',#78119,.T.); +#78119 = EDGE_LOOP('',(#78120,#78128,#78129,#78130)); +#78120 = ORIENTED_EDGE('',*,*,#78121,.F.); +#78121 = EDGE_CURVE('',#78093,#78122,#78124,.T.); +#78122 = VERTEX_POINT('',#78123); +#78123 = CARTESIAN_POINT('',(6.E-02,7.5E-02,-1.61)); +#78124 = LINE('',#78125,#78126); +#78125 = CARTESIAN_POINT('',(0.279264705882,7.5E-02,-0.732941176471)); +#78126 = VECTOR('',#78127,1.); +#78127 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78128 = ORIENTED_EDGE('',*,*,#78100,.T.); +#78129 = ORIENTED_EDGE('',*,*,#78044,.T.); +#78130 = ORIENTED_EDGE('',*,*,#78131,.F.); +#78131 = EDGE_CURVE('',#78122,#78045,#78132,.T.); +#78132 = LINE('',#78133,#78134); +#78133 = CARTESIAN_POINT('',(6.E-02,7.5E-02,-1.61)); +#78134 = VECTOR('',#78135,1.); +#78135 = DIRECTION('',(0.,-1.,0.)); +#78136 = PLANE('',#78137); +#78137 = AXIS2_PLACEMENT_3D('',#78138,#78139,#78140); +#78138 = CARTESIAN_POINT('',(8.5E-02,7.5E-02,-1.51)); +#78139 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78140 = DIRECTION('',(0.,-1.,0.)); +#78141 = ADVANCED_FACE('',(#78142),#78160,.T.); +#78142 = FACE_BOUND('',#78143,.F.); +#78143 = EDGE_LOOP('',(#78144,#78145,#78153,#78159)); +#78144 = ORIENTED_EDGE('',*,*,#78076,.T.); +#78145 = ORIENTED_EDGE('',*,*,#78146,.T.); +#78146 = EDGE_CURVE('',#78069,#78147,#78149,.T.); +#78147 = VERTEX_POINT('',#78148); +#78148 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78149 = LINE('',#78150,#78151); +#78150 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78151 = VECTOR('',#78152,1.); +#78152 = DIRECTION('',(0.,1.,0.)); +#78153 = ORIENTED_EDGE('',*,*,#78154,.T.); +#78154 = EDGE_CURVE('',#78147,#78091,#78155,.T.); +#78155 = LINE('',#78156,#78157); +#78156 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78157 = VECTOR('',#78158,1.); +#78158 = DIRECTION('',(1.,0.,0.)); +#78159 = ORIENTED_EDGE('',*,*,#78107,.T.); +#78160 = PLANE('',#78161); +#78161 = AXIS2_PLACEMENT_3D('',#78162,#78163,#78164); +#78162 = CARTESIAN_POINT('',(0.,0.,0.19)); +#78163 = DIRECTION('',(0.,0.,1.)); +#78164 = DIRECTION('',(1.,0.,-0.)); +#78165 = ADVANCED_FACE('',(#78166),#78184,.F.); +#78166 = FACE_BOUND('',#78167,.F.); +#78167 = EDGE_LOOP('',(#78168,#78169,#78170,#78178)); +#78168 = ORIENTED_EDGE('',*,*,#78052,.F.); +#78169 = ORIENTED_EDGE('',*,*,#78131,.F.); +#78170 = ORIENTED_EDGE('',*,*,#78171,.F.); +#78171 = EDGE_CURVE('',#78172,#78122,#78174,.T.); +#78172 = VERTEX_POINT('',#78173); +#78173 = CARTESIAN_POINT('',(-6.E-02,7.5E-02,-1.61)); +#78174 = LINE('',#78175,#78176); +#78175 = CARTESIAN_POINT('',(-0.11,7.5E-02,-1.61)); +#78176 = VECTOR('',#78177,1.); +#78177 = DIRECTION('',(1.,0.,0.)); +#78178 = ORIENTED_EDGE('',*,*,#78179,.F.); +#78179 = EDGE_CURVE('',#78053,#78172,#78180,.T.); +#78180 = LINE('',#78181,#78182); +#78181 = CARTESIAN_POINT('',(-6.E-02,-7.5E-02,-1.61)); +#78182 = VECTOR('',#78183,1.); +#78183 = DIRECTION('',(0.,1.,0.)); +#78184 = PLANE('',#78185); +#78185 = AXIS2_PLACEMENT_3D('',#78186,#78187,#78188); +#78186 = CARTESIAN_POINT('',(0.,0.,-1.61)); +#78187 = DIRECTION('',(0.,0.,1.)); +#78188 = DIRECTION('',(1.,0.,-0.)); +#78189 = ADVANCED_FACE('',(#78190),#78208,.F.); +#78190 = FACE_BOUND('',#78191,.F.); +#78191 = EDGE_LOOP('',(#78192,#78193,#78201,#78207)); +#78192 = ORIENTED_EDGE('',*,*,#78068,.T.); +#78193 = ORIENTED_EDGE('',*,*,#78194,.T.); +#78194 = EDGE_CURVE('',#78061,#78195,#78197,.T.); +#78195 = VERTEX_POINT('',#78196); +#78196 = CARTESIAN_POINT('',(-0.11,7.5E-02,-1.41)); +#78197 = LINE('',#78198,#78199); +#78198 = CARTESIAN_POINT('',(-0.11,-7.5E-02,-1.41)); +#78199 = VECTOR('',#78200,1.); +#78200 = DIRECTION('',(0.,1.,0.)); +#78201 = ORIENTED_EDGE('',*,*,#78202,.F.); +#78202 = EDGE_CURVE('',#78147,#78195,#78203,.T.); +#78203 = LINE('',#78204,#78205); +#78204 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78205 = VECTOR('',#78206,1.); +#78206 = DIRECTION('',(0.,0.,-1.)); +#78207 = ORIENTED_EDGE('',*,*,#78146,.F.); +#78208 = PLANE('',#78209); +#78209 = AXIS2_PLACEMENT_3D('',#78210,#78211,#78212); +#78210 = CARTESIAN_POINT('',(-0.11,-7.5E-02,0.19)); +#78211 = DIRECTION('',(1.,0.,0.)); +#78212 = DIRECTION('',(-0.,1.,0.)); +#78213 = ADVANCED_FACE('',(#78214),#78225,.T.); +#78214 = FACE_BOUND('',#78215,.T.); +#78215 = EDGE_LOOP('',(#78216,#78217,#78218,#78224)); +#78216 = ORIENTED_EDGE('',*,*,#78060,.F.); +#78217 = ORIENTED_EDGE('',*,*,#78194,.T.); +#78218 = ORIENTED_EDGE('',*,*,#78219,.T.); +#78219 = EDGE_CURVE('',#78195,#78172,#78220,.T.); +#78220 = LINE('',#78221,#78222); +#78221 = CARTESIAN_POINT('',(-0.285735294118,7.5E-02,-0.707058823529)); +#78222 = VECTOR('',#78223,1.); +#78223 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78224 = ORIENTED_EDGE('',*,*,#78179,.F.); +#78225 = PLANE('',#78226); +#78226 = AXIS2_PLACEMENT_3D('',#78227,#78228,#78229); +#78227 = CARTESIAN_POINT('',(-8.5E-02,-7.5E-02,-1.51)); +#78228 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78229 = DIRECTION('',(0.,1.,0.)); +#78230 = ADVANCED_FACE('',(#78231),#78239,.F.); +#78231 = FACE_BOUND('',#78232,.F.); +#78232 = EDGE_LOOP('',(#78233,#78234,#78235,#78236,#78237,#78238)); +#78233 = ORIENTED_EDGE('',*,*,#78202,.T.); +#78234 = ORIENTED_EDGE('',*,*,#78219,.T.); +#78235 = ORIENTED_EDGE('',*,*,#78171,.T.); +#78236 = ORIENTED_EDGE('',*,*,#78121,.F.); +#78237 = ORIENTED_EDGE('',*,*,#78090,.F.); +#78238 = ORIENTED_EDGE('',*,*,#78154,.F.); +#78239 = PLANE('',#78240); +#78240 = AXIS2_PLACEMENT_3D('',#78241,#78242,#78243); +#78241 = CARTESIAN_POINT('',(-0.11,7.5E-02,0.19)); +#78242 = DIRECTION('',(0.,-1.,0.)); +#78243 = DIRECTION('',(1.,0.,0.)); +#78244 = MANIFOLD_SOLID_BREP('',#78245); +#78245 = CLOSED_SHELL('',(#78246,#78302,#78333,#78357,#78381,#78405, + #78429,#78446)); +#78246 = ADVANCED_FACE('',(#78247),#78297,.F.); +#78247 = FACE_BOUND('',#78248,.F.); +#78248 = EDGE_LOOP('',(#78249,#78259,#78267,#78275,#78283,#78291)); +#78249 = ORIENTED_EDGE('',*,*,#78250,.T.); +#78250 = EDGE_CURVE('',#78251,#78253,#78255,.T.); +#78251 = VERTEX_POINT('',#78252); +#78252 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78253 = VERTEX_POINT('',#78254); +#78254 = CARTESIAN_POINT('',(0.96,-1.425,-1.41)); +#78255 = LINE('',#78256,#78257); +#78256 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78257 = VECTOR('',#78258,1.); +#78258 = DIRECTION('',(0.,0.,-1.)); +#78259 = ORIENTED_EDGE('',*,*,#78260,.T.); +#78260 = EDGE_CURVE('',#78253,#78261,#78263,.T.); +#78261 = VERTEX_POINT('',#78262); +#78262 = CARTESIAN_POINT('',(0.91,-1.425,-1.61)); +#78263 = LINE('',#78264,#78265); +#78264 = CARTESIAN_POINT('',(1.135735294118,-1.425,-0.707058823529)); +#78265 = VECTOR('',#78266,1.); +#78266 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78267 = ORIENTED_EDGE('',*,*,#78268,.T.); +#78268 = EDGE_CURVE('',#78261,#78269,#78271,.T.); +#78269 = VERTEX_POINT('',#78270); +#78270 = CARTESIAN_POINT('',(0.79,-1.425,-1.61)); +#78271 = LINE('',#78272,#78273); +#78272 = CARTESIAN_POINT('',(0.96,-1.425,-1.61)); +#78273 = VECTOR('',#78274,1.); +#78274 = DIRECTION('',(-1.,0.,0.)); +#78275 = ORIENTED_EDGE('',*,*,#78276,.F.); +#78276 = EDGE_CURVE('',#78277,#78269,#78279,.T.); +#78277 = VERTEX_POINT('',#78278); +#78278 = CARTESIAN_POINT('',(0.74,-1.425,-1.41)); +#78279 = LINE('',#78280,#78281); +#78280 = CARTESIAN_POINT('',(0.570735294118,-1.425,-0.732941176471)); +#78281 = VECTOR('',#78282,1.); +#78282 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78283 = ORIENTED_EDGE('',*,*,#78284,.F.); +#78284 = EDGE_CURVE('',#78285,#78277,#78287,.T.); +#78285 = VERTEX_POINT('',#78286); +#78286 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78287 = LINE('',#78288,#78289); +#78288 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78289 = VECTOR('',#78290,1.); +#78290 = DIRECTION('',(0.,0.,-1.)); +#78291 = ORIENTED_EDGE('',*,*,#78292,.F.); +#78292 = EDGE_CURVE('',#78251,#78285,#78293,.T.); +#78293 = LINE('',#78294,#78295); +#78294 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78295 = VECTOR('',#78296,1.); +#78296 = DIRECTION('',(-1.,0.,0.)); +#78297 = PLANE('',#78298); +#78298 = AXIS2_PLACEMENT_3D('',#78299,#78300,#78301); +#78299 = CARTESIAN_POINT('',(0.96,-1.425,0.19)); +#78300 = DIRECTION('',(0.,1.,0.)); +#78301 = DIRECTION('',(-1.,0.,0.)); +#78302 = ADVANCED_FACE('',(#78303),#78328,.F.); +#78303 = FACE_BOUND('',#78304,.F.); +#78304 = EDGE_LOOP('',(#78305,#78315,#78321,#78322)); +#78305 = ORIENTED_EDGE('',*,*,#78306,.T.); +#78306 = EDGE_CURVE('',#78307,#78309,#78311,.T.); +#78307 = VERTEX_POINT('',#78308); +#78308 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78309 = VERTEX_POINT('',#78310); +#78310 = CARTESIAN_POINT('',(0.96,-1.275,-1.41)); +#78311 = LINE('',#78312,#78313); +#78312 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78313 = VECTOR('',#78314,1.); +#78314 = DIRECTION('',(0.,0.,-1.)); +#78315 = ORIENTED_EDGE('',*,*,#78316,.T.); +#78316 = EDGE_CURVE('',#78309,#78253,#78317,.T.); +#78317 = LINE('',#78318,#78319); +#78318 = CARTESIAN_POINT('',(0.96,-1.275,-1.41)); +#78319 = VECTOR('',#78320,1.); +#78320 = DIRECTION('',(0.,-1.,0.)); +#78321 = ORIENTED_EDGE('',*,*,#78250,.F.); +#78322 = ORIENTED_EDGE('',*,*,#78323,.F.); +#78323 = EDGE_CURVE('',#78307,#78251,#78324,.T.); +#78324 = LINE('',#78325,#78326); +#78325 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78326 = VECTOR('',#78327,1.); +#78327 = DIRECTION('',(0.,-1.,0.)); +#78328 = PLANE('',#78329); +#78329 = AXIS2_PLACEMENT_3D('',#78330,#78331,#78332); +#78330 = CARTESIAN_POINT('',(0.96,-1.275,0.19)); +#78331 = DIRECTION('',(-1.,-0.,-0.)); +#78332 = DIRECTION('',(0.,-1.,0.)); +#78333 = ADVANCED_FACE('',(#78334),#78352,.T.); +#78334 = FACE_BOUND('',#78335,.T.); +#78335 = EDGE_LOOP('',(#78336,#78344,#78345,#78346)); +#78336 = ORIENTED_EDGE('',*,*,#78337,.F.); +#78337 = EDGE_CURVE('',#78309,#78338,#78340,.T.); +#78338 = VERTEX_POINT('',#78339); +#78339 = CARTESIAN_POINT('',(0.91,-1.275,-1.61)); +#78340 = LINE('',#78341,#78342); +#78341 = CARTESIAN_POINT('',(1.129264705882,-1.275,-0.732941176471)); +#78342 = VECTOR('',#78343,1.); +#78343 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78344 = ORIENTED_EDGE('',*,*,#78316,.T.); +#78345 = ORIENTED_EDGE('',*,*,#78260,.T.); +#78346 = ORIENTED_EDGE('',*,*,#78347,.F.); +#78347 = EDGE_CURVE('',#78338,#78261,#78348,.T.); +#78348 = LINE('',#78349,#78350); +#78349 = CARTESIAN_POINT('',(0.91,-1.275,-1.61)); +#78350 = VECTOR('',#78351,1.); +#78351 = DIRECTION('',(0.,-1.,0.)); +#78352 = PLANE('',#78353); +#78353 = AXIS2_PLACEMENT_3D('',#78354,#78355,#78356); +#78354 = CARTESIAN_POINT('',(0.935,-1.275,-1.51)); +#78355 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78356 = DIRECTION('',(0.,-1.,0.)); +#78357 = ADVANCED_FACE('',(#78358),#78376,.T.); +#78358 = FACE_BOUND('',#78359,.F.); +#78359 = EDGE_LOOP('',(#78360,#78361,#78369,#78375)); +#78360 = ORIENTED_EDGE('',*,*,#78292,.T.); +#78361 = ORIENTED_EDGE('',*,*,#78362,.T.); +#78362 = EDGE_CURVE('',#78285,#78363,#78365,.T.); +#78363 = VERTEX_POINT('',#78364); +#78364 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78365 = LINE('',#78366,#78367); +#78366 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78367 = VECTOR('',#78368,1.); +#78368 = DIRECTION('',(0.,1.,0.)); +#78369 = ORIENTED_EDGE('',*,*,#78370,.T.); +#78370 = EDGE_CURVE('',#78363,#78307,#78371,.T.); +#78371 = LINE('',#78372,#78373); +#78372 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78373 = VECTOR('',#78374,1.); +#78374 = DIRECTION('',(1.,0.,0.)); +#78375 = ORIENTED_EDGE('',*,*,#78323,.T.); +#78376 = PLANE('',#78377); +#78377 = AXIS2_PLACEMENT_3D('',#78378,#78379,#78380); +#78378 = CARTESIAN_POINT('',(0.85,-1.35,0.19)); +#78379 = DIRECTION('',(0.,0.,1.)); +#78380 = DIRECTION('',(1.,0.,-0.)); +#78381 = ADVANCED_FACE('',(#78382),#78400,.F.); +#78382 = FACE_BOUND('',#78383,.F.); +#78383 = EDGE_LOOP('',(#78384,#78385,#78386,#78394)); +#78384 = ORIENTED_EDGE('',*,*,#78268,.F.); +#78385 = ORIENTED_EDGE('',*,*,#78347,.F.); +#78386 = ORIENTED_EDGE('',*,*,#78387,.F.); +#78387 = EDGE_CURVE('',#78388,#78338,#78390,.T.); +#78388 = VERTEX_POINT('',#78389); +#78389 = CARTESIAN_POINT('',(0.79,-1.275,-1.61)); +#78390 = LINE('',#78391,#78392); +#78391 = CARTESIAN_POINT('',(0.74,-1.275,-1.61)); +#78392 = VECTOR('',#78393,1.); +#78393 = DIRECTION('',(1.,0.,0.)); +#78394 = ORIENTED_EDGE('',*,*,#78395,.F.); +#78395 = EDGE_CURVE('',#78269,#78388,#78396,.T.); +#78396 = LINE('',#78397,#78398); +#78397 = CARTESIAN_POINT('',(0.79,-1.425,-1.61)); +#78398 = VECTOR('',#78399,1.); +#78399 = DIRECTION('',(0.,1.,0.)); +#78400 = PLANE('',#78401); +#78401 = AXIS2_PLACEMENT_3D('',#78402,#78403,#78404); +#78402 = CARTESIAN_POINT('',(0.85,-1.35,-1.61)); +#78403 = DIRECTION('',(0.,0.,1.)); +#78404 = DIRECTION('',(1.,0.,-0.)); +#78405 = ADVANCED_FACE('',(#78406),#78424,.F.); +#78406 = FACE_BOUND('',#78407,.F.); +#78407 = EDGE_LOOP('',(#78408,#78409,#78417,#78423)); +#78408 = ORIENTED_EDGE('',*,*,#78284,.T.); +#78409 = ORIENTED_EDGE('',*,*,#78410,.T.); +#78410 = EDGE_CURVE('',#78277,#78411,#78413,.T.); +#78411 = VERTEX_POINT('',#78412); +#78412 = CARTESIAN_POINT('',(0.74,-1.275,-1.41)); +#78413 = LINE('',#78414,#78415); +#78414 = CARTESIAN_POINT('',(0.74,-1.425,-1.41)); +#78415 = VECTOR('',#78416,1.); +#78416 = DIRECTION('',(0.,1.,0.)); +#78417 = ORIENTED_EDGE('',*,*,#78418,.F.); +#78418 = EDGE_CURVE('',#78363,#78411,#78419,.T.); +#78419 = LINE('',#78420,#78421); +#78420 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78421 = VECTOR('',#78422,1.); +#78422 = DIRECTION('',(0.,0.,-1.)); +#78423 = ORIENTED_EDGE('',*,*,#78362,.F.); +#78424 = PLANE('',#78425); +#78425 = AXIS2_PLACEMENT_3D('',#78426,#78427,#78428); +#78426 = CARTESIAN_POINT('',(0.74,-1.425,0.19)); +#78427 = DIRECTION('',(1.,0.,0.)); +#78428 = DIRECTION('',(-0.,1.,0.)); +#78429 = ADVANCED_FACE('',(#78430),#78441,.T.); +#78430 = FACE_BOUND('',#78431,.T.); +#78431 = EDGE_LOOP('',(#78432,#78433,#78434,#78440)); +#78432 = ORIENTED_EDGE('',*,*,#78276,.F.); +#78433 = ORIENTED_EDGE('',*,*,#78410,.T.); +#78434 = ORIENTED_EDGE('',*,*,#78435,.T.); +#78435 = EDGE_CURVE('',#78411,#78388,#78436,.T.); +#78436 = LINE('',#78437,#78438); +#78437 = CARTESIAN_POINT('',(0.564264705882,-1.275,-0.707058823529)); +#78438 = VECTOR('',#78439,1.); +#78439 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78440 = ORIENTED_EDGE('',*,*,#78395,.F.); +#78441 = PLANE('',#78442); +#78442 = AXIS2_PLACEMENT_3D('',#78443,#78444,#78445); +#78443 = CARTESIAN_POINT('',(0.765,-1.425,-1.51)); +#78444 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78445 = DIRECTION('',(0.,1.,0.)); +#78446 = ADVANCED_FACE('',(#78447),#78455,.F.); +#78447 = FACE_BOUND('',#78448,.F.); +#78448 = EDGE_LOOP('',(#78449,#78450,#78451,#78452,#78453,#78454)); +#78449 = ORIENTED_EDGE('',*,*,#78418,.T.); +#78450 = ORIENTED_EDGE('',*,*,#78435,.T.); +#78451 = ORIENTED_EDGE('',*,*,#78387,.T.); +#78452 = ORIENTED_EDGE('',*,*,#78337,.F.); +#78453 = ORIENTED_EDGE('',*,*,#78306,.F.); +#78454 = ORIENTED_EDGE('',*,*,#78370,.F.); +#78455 = PLANE('',#78456); +#78456 = AXIS2_PLACEMENT_3D('',#78457,#78458,#78459); +#78457 = CARTESIAN_POINT('',(0.74,-1.275,0.19)); +#78458 = DIRECTION('',(0.,-1.,0.)); +#78459 = DIRECTION('',(1.,0.,0.)); +#78460 = MANIFOLD_SOLID_BREP('',#78461); +#78461 = CLOSED_SHELL('',(#78462,#78518,#78549,#78573,#78597,#78621, + #78645,#78662)); +#78462 = ADVANCED_FACE('',(#78463),#78513,.F.); +#78463 = FACE_BOUND('',#78464,.F.); +#78464 = EDGE_LOOP('',(#78465,#78475,#78483,#78491,#78499,#78507)); +#78465 = ORIENTED_EDGE('',*,*,#78466,.T.); +#78466 = EDGE_CURVE('',#78467,#78469,#78471,.T.); +#78467 = VERTEX_POINT('',#78468); +#78468 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78469 = VERTEX_POINT('',#78470); +#78470 = CARTESIAN_POINT('',(0.96,-7.5E-02,-1.41)); +#78471 = LINE('',#78472,#78473); +#78472 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78473 = VECTOR('',#78474,1.); +#78474 = DIRECTION('',(0.,0.,-1.)); +#78475 = ORIENTED_EDGE('',*,*,#78476,.T.); +#78476 = EDGE_CURVE('',#78469,#78477,#78479,.T.); +#78477 = VERTEX_POINT('',#78478); +#78478 = CARTESIAN_POINT('',(0.91,-7.5E-02,-1.61)); +#78479 = LINE('',#78480,#78481); +#78480 = CARTESIAN_POINT('',(1.135735294118,-7.5E-02,-0.707058823529)); +#78481 = VECTOR('',#78482,1.); +#78482 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78483 = ORIENTED_EDGE('',*,*,#78484,.T.); +#78484 = EDGE_CURVE('',#78477,#78485,#78487,.T.); +#78485 = VERTEX_POINT('',#78486); +#78486 = CARTESIAN_POINT('',(0.79,-7.5E-02,-1.61)); +#78487 = LINE('',#78488,#78489); +#78488 = CARTESIAN_POINT('',(0.96,-7.5E-02,-1.61)); +#78489 = VECTOR('',#78490,1.); +#78490 = DIRECTION('',(-1.,0.,0.)); +#78491 = ORIENTED_EDGE('',*,*,#78492,.F.); +#78492 = EDGE_CURVE('',#78493,#78485,#78495,.T.); +#78493 = VERTEX_POINT('',#78494); +#78494 = CARTESIAN_POINT('',(0.74,-7.5E-02,-1.41)); +#78495 = LINE('',#78496,#78497); +#78496 = CARTESIAN_POINT('',(0.570735294118,-7.5E-02,-0.732941176471)); +#78497 = VECTOR('',#78498,1.); +#78498 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78499 = ORIENTED_EDGE('',*,*,#78500,.F.); +#78500 = EDGE_CURVE('',#78501,#78493,#78503,.T.); +#78501 = VERTEX_POINT('',#78502); +#78502 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78503 = LINE('',#78504,#78505); +#78504 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78505 = VECTOR('',#78506,1.); +#78506 = DIRECTION('',(0.,0.,-1.)); +#78507 = ORIENTED_EDGE('',*,*,#78508,.F.); +#78508 = EDGE_CURVE('',#78467,#78501,#78509,.T.); +#78509 = LINE('',#78510,#78511); +#78510 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78511 = VECTOR('',#78512,1.); +#78512 = DIRECTION('',(-1.,0.,0.)); +#78513 = PLANE('',#78514); +#78514 = AXIS2_PLACEMENT_3D('',#78515,#78516,#78517); +#78515 = CARTESIAN_POINT('',(0.96,-7.5E-02,0.19)); +#78516 = DIRECTION('',(0.,1.,0.)); +#78517 = DIRECTION('',(-1.,0.,0.)); +#78518 = ADVANCED_FACE('',(#78519),#78544,.F.); +#78519 = FACE_BOUND('',#78520,.F.); +#78520 = EDGE_LOOP('',(#78521,#78531,#78537,#78538)); +#78521 = ORIENTED_EDGE('',*,*,#78522,.T.); +#78522 = EDGE_CURVE('',#78523,#78525,#78527,.T.); +#78523 = VERTEX_POINT('',#78524); +#78524 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78525 = VERTEX_POINT('',#78526); +#78526 = CARTESIAN_POINT('',(0.96,7.5E-02,-1.41)); +#78527 = LINE('',#78528,#78529); +#78528 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78529 = VECTOR('',#78530,1.); +#78530 = DIRECTION('',(0.,0.,-1.)); +#78531 = ORIENTED_EDGE('',*,*,#78532,.T.); +#78532 = EDGE_CURVE('',#78525,#78469,#78533,.T.); +#78533 = LINE('',#78534,#78535); +#78534 = CARTESIAN_POINT('',(0.96,7.5E-02,-1.41)); +#78535 = VECTOR('',#78536,1.); +#78536 = DIRECTION('',(0.,-1.,0.)); +#78537 = ORIENTED_EDGE('',*,*,#78466,.F.); +#78538 = ORIENTED_EDGE('',*,*,#78539,.F.); +#78539 = EDGE_CURVE('',#78523,#78467,#78540,.T.); +#78540 = LINE('',#78541,#78542); +#78541 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78542 = VECTOR('',#78543,1.); +#78543 = DIRECTION('',(0.,-1.,0.)); +#78544 = PLANE('',#78545); +#78545 = AXIS2_PLACEMENT_3D('',#78546,#78547,#78548); +#78546 = CARTESIAN_POINT('',(0.96,7.5E-02,0.19)); +#78547 = DIRECTION('',(-1.,-0.,-0.)); +#78548 = DIRECTION('',(0.,-1.,0.)); +#78549 = ADVANCED_FACE('',(#78550),#78568,.T.); +#78550 = FACE_BOUND('',#78551,.T.); +#78551 = EDGE_LOOP('',(#78552,#78560,#78561,#78562)); +#78552 = ORIENTED_EDGE('',*,*,#78553,.F.); +#78553 = EDGE_CURVE('',#78525,#78554,#78556,.T.); +#78554 = VERTEX_POINT('',#78555); +#78555 = CARTESIAN_POINT('',(0.91,7.5E-02,-1.61)); +#78556 = LINE('',#78557,#78558); +#78557 = CARTESIAN_POINT('',(1.129264705882,7.5E-02,-0.732941176471)); +#78558 = VECTOR('',#78559,1.); +#78559 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78560 = ORIENTED_EDGE('',*,*,#78532,.T.); +#78561 = ORIENTED_EDGE('',*,*,#78476,.T.); +#78562 = ORIENTED_EDGE('',*,*,#78563,.F.); +#78563 = EDGE_CURVE('',#78554,#78477,#78564,.T.); +#78564 = LINE('',#78565,#78566); +#78565 = CARTESIAN_POINT('',(0.91,7.5E-02,-1.61)); +#78566 = VECTOR('',#78567,1.); +#78567 = DIRECTION('',(0.,-1.,0.)); +#78568 = PLANE('',#78569); +#78569 = AXIS2_PLACEMENT_3D('',#78570,#78571,#78572); +#78570 = CARTESIAN_POINT('',(0.935,7.5E-02,-1.51)); +#78571 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78572 = DIRECTION('',(0.,-1.,0.)); +#78573 = ADVANCED_FACE('',(#78574),#78592,.T.); +#78574 = FACE_BOUND('',#78575,.F.); +#78575 = EDGE_LOOP('',(#78576,#78577,#78585,#78591)); +#78576 = ORIENTED_EDGE('',*,*,#78508,.T.); +#78577 = ORIENTED_EDGE('',*,*,#78578,.T.); +#78578 = EDGE_CURVE('',#78501,#78579,#78581,.T.); +#78579 = VERTEX_POINT('',#78580); +#78580 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78581 = LINE('',#78582,#78583); +#78582 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78583 = VECTOR('',#78584,1.); +#78584 = DIRECTION('',(0.,1.,0.)); +#78585 = ORIENTED_EDGE('',*,*,#78586,.T.); +#78586 = EDGE_CURVE('',#78579,#78523,#78587,.T.); +#78587 = LINE('',#78588,#78589); +#78588 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78589 = VECTOR('',#78590,1.); +#78590 = DIRECTION('',(1.,0.,0.)); +#78591 = ORIENTED_EDGE('',*,*,#78539,.T.); +#78592 = PLANE('',#78593); +#78593 = AXIS2_PLACEMENT_3D('',#78594,#78595,#78596); +#78594 = CARTESIAN_POINT('',(0.85,0.,0.19)); +#78595 = DIRECTION('',(0.,0.,1.)); +#78596 = DIRECTION('',(1.,0.,-0.)); +#78597 = ADVANCED_FACE('',(#78598),#78616,.F.); +#78598 = FACE_BOUND('',#78599,.F.); +#78599 = EDGE_LOOP('',(#78600,#78601,#78602,#78610)); +#78600 = ORIENTED_EDGE('',*,*,#78484,.F.); +#78601 = ORIENTED_EDGE('',*,*,#78563,.F.); +#78602 = ORIENTED_EDGE('',*,*,#78603,.F.); +#78603 = EDGE_CURVE('',#78604,#78554,#78606,.T.); +#78604 = VERTEX_POINT('',#78605); +#78605 = CARTESIAN_POINT('',(0.79,7.5E-02,-1.61)); +#78606 = LINE('',#78607,#78608); +#78607 = CARTESIAN_POINT('',(0.74,7.5E-02,-1.61)); +#78608 = VECTOR('',#78609,1.); +#78609 = DIRECTION('',(1.,0.,0.)); +#78610 = ORIENTED_EDGE('',*,*,#78611,.F.); +#78611 = EDGE_CURVE('',#78485,#78604,#78612,.T.); +#78612 = LINE('',#78613,#78614); +#78613 = CARTESIAN_POINT('',(0.79,-7.5E-02,-1.61)); +#78614 = VECTOR('',#78615,1.); +#78615 = DIRECTION('',(0.,1.,0.)); +#78616 = PLANE('',#78617); +#78617 = AXIS2_PLACEMENT_3D('',#78618,#78619,#78620); +#78618 = CARTESIAN_POINT('',(0.85,0.,-1.61)); +#78619 = DIRECTION('',(0.,0.,1.)); +#78620 = DIRECTION('',(1.,0.,-0.)); +#78621 = ADVANCED_FACE('',(#78622),#78640,.F.); +#78622 = FACE_BOUND('',#78623,.F.); +#78623 = EDGE_LOOP('',(#78624,#78625,#78633,#78639)); +#78624 = ORIENTED_EDGE('',*,*,#78500,.T.); +#78625 = ORIENTED_EDGE('',*,*,#78626,.T.); +#78626 = EDGE_CURVE('',#78493,#78627,#78629,.T.); +#78627 = VERTEX_POINT('',#78628); +#78628 = CARTESIAN_POINT('',(0.74,7.5E-02,-1.41)); +#78629 = LINE('',#78630,#78631); +#78630 = CARTESIAN_POINT('',(0.74,-7.5E-02,-1.41)); +#78631 = VECTOR('',#78632,1.); +#78632 = DIRECTION('',(0.,1.,0.)); +#78633 = ORIENTED_EDGE('',*,*,#78634,.F.); +#78634 = EDGE_CURVE('',#78579,#78627,#78635,.T.); +#78635 = LINE('',#78636,#78637); +#78636 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78637 = VECTOR('',#78638,1.); +#78638 = DIRECTION('',(0.,0.,-1.)); +#78639 = ORIENTED_EDGE('',*,*,#78578,.F.); +#78640 = PLANE('',#78641); +#78641 = AXIS2_PLACEMENT_3D('',#78642,#78643,#78644); +#78642 = CARTESIAN_POINT('',(0.74,-7.5E-02,0.19)); +#78643 = DIRECTION('',(1.,0.,0.)); +#78644 = DIRECTION('',(-0.,1.,0.)); +#78645 = ADVANCED_FACE('',(#78646),#78657,.T.); +#78646 = FACE_BOUND('',#78647,.T.); +#78647 = EDGE_LOOP('',(#78648,#78649,#78650,#78656)); +#78648 = ORIENTED_EDGE('',*,*,#78492,.F.); +#78649 = ORIENTED_EDGE('',*,*,#78626,.T.); +#78650 = ORIENTED_EDGE('',*,*,#78651,.T.); +#78651 = EDGE_CURVE('',#78627,#78604,#78652,.T.); +#78652 = LINE('',#78653,#78654); +#78653 = CARTESIAN_POINT('',(0.564264705882,7.5E-02,-0.707058823529)); +#78654 = VECTOR('',#78655,1.); +#78655 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78656 = ORIENTED_EDGE('',*,*,#78611,.F.); +#78657 = PLANE('',#78658); +#78658 = AXIS2_PLACEMENT_3D('',#78659,#78660,#78661); +#78659 = CARTESIAN_POINT('',(0.765,-7.5E-02,-1.51)); +#78660 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78661 = DIRECTION('',(0.,1.,0.)); +#78662 = ADVANCED_FACE('',(#78663),#78671,.F.); +#78663 = FACE_BOUND('',#78664,.F.); +#78664 = EDGE_LOOP('',(#78665,#78666,#78667,#78668,#78669,#78670)); +#78665 = ORIENTED_EDGE('',*,*,#78634,.T.); +#78666 = ORIENTED_EDGE('',*,*,#78651,.T.); +#78667 = ORIENTED_EDGE('',*,*,#78603,.T.); +#78668 = ORIENTED_EDGE('',*,*,#78553,.F.); +#78669 = ORIENTED_EDGE('',*,*,#78522,.F.); +#78670 = ORIENTED_EDGE('',*,*,#78586,.F.); +#78671 = PLANE('',#78672); +#78672 = AXIS2_PLACEMENT_3D('',#78673,#78674,#78675); +#78673 = CARTESIAN_POINT('',(0.74,7.5E-02,0.19)); +#78674 = DIRECTION('',(0.,-1.,0.)); +#78675 = DIRECTION('',(1.,0.,0.)); +#78676 = MANIFOLD_SOLID_BREP('',#78677); +#78677 = CLOSED_SHELL('',(#78678,#78734,#78765,#78789,#78813,#78837, + #78861,#78878)); +#78678 = ADVANCED_FACE('',(#78679),#78729,.F.); +#78679 = FACE_BOUND('',#78680,.F.); +#78680 = EDGE_LOOP('',(#78681,#78691,#78699,#78707,#78715,#78723)); +#78681 = ORIENTED_EDGE('',*,*,#78682,.T.); +#78682 = EDGE_CURVE('',#78683,#78685,#78687,.T.); +#78683 = VERTEX_POINT('',#78684); +#78684 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78685 = VERTEX_POINT('',#78686); +#78686 = CARTESIAN_POINT('',(1.81,-1.425,-1.41)); +#78687 = LINE('',#78688,#78689); +#78688 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78689 = VECTOR('',#78690,1.); +#78690 = DIRECTION('',(0.,0.,-1.)); +#78691 = ORIENTED_EDGE('',*,*,#78692,.T.); +#78692 = EDGE_CURVE('',#78685,#78693,#78695,.T.); +#78693 = VERTEX_POINT('',#78694); +#78694 = CARTESIAN_POINT('',(1.76,-1.425,-1.61)); +#78695 = LINE('',#78696,#78697); +#78696 = CARTESIAN_POINT('',(1.985735294118,-1.425,-0.707058823529)); +#78697 = VECTOR('',#78698,1.); +#78698 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78699 = ORIENTED_EDGE('',*,*,#78700,.T.); +#78700 = EDGE_CURVE('',#78693,#78701,#78703,.T.); +#78701 = VERTEX_POINT('',#78702); +#78702 = CARTESIAN_POINT('',(1.64,-1.425,-1.61)); +#78703 = LINE('',#78704,#78705); +#78704 = CARTESIAN_POINT('',(1.81,-1.425,-1.61)); +#78705 = VECTOR('',#78706,1.); +#78706 = DIRECTION('',(-1.,0.,0.)); +#78707 = ORIENTED_EDGE('',*,*,#78708,.F.); +#78708 = EDGE_CURVE('',#78709,#78701,#78711,.T.); +#78709 = VERTEX_POINT('',#78710); +#78710 = CARTESIAN_POINT('',(1.59,-1.425,-1.41)); +#78711 = LINE('',#78712,#78713); +#78712 = CARTESIAN_POINT('',(1.420735294118,-1.425,-0.732941176471)); +#78713 = VECTOR('',#78714,1.); +#78714 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78715 = ORIENTED_EDGE('',*,*,#78716,.F.); +#78716 = EDGE_CURVE('',#78717,#78709,#78719,.T.); +#78717 = VERTEX_POINT('',#78718); +#78718 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78719 = LINE('',#78720,#78721); +#78720 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78721 = VECTOR('',#78722,1.); +#78722 = DIRECTION('',(0.,0.,-1.)); +#78723 = ORIENTED_EDGE('',*,*,#78724,.F.); +#78724 = EDGE_CURVE('',#78683,#78717,#78725,.T.); +#78725 = LINE('',#78726,#78727); +#78726 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78727 = VECTOR('',#78728,1.); +#78728 = DIRECTION('',(-1.,0.,0.)); +#78729 = PLANE('',#78730); +#78730 = AXIS2_PLACEMENT_3D('',#78731,#78732,#78733); +#78731 = CARTESIAN_POINT('',(1.81,-1.425,0.19)); +#78732 = DIRECTION('',(0.,1.,0.)); +#78733 = DIRECTION('',(-1.,0.,0.)); +#78734 = ADVANCED_FACE('',(#78735),#78760,.F.); +#78735 = FACE_BOUND('',#78736,.F.); +#78736 = EDGE_LOOP('',(#78737,#78747,#78753,#78754)); +#78737 = ORIENTED_EDGE('',*,*,#78738,.T.); +#78738 = EDGE_CURVE('',#78739,#78741,#78743,.T.); +#78739 = VERTEX_POINT('',#78740); +#78740 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78741 = VERTEX_POINT('',#78742); +#78742 = CARTESIAN_POINT('',(1.81,-1.275,-1.41)); +#78743 = LINE('',#78744,#78745); +#78744 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78745 = VECTOR('',#78746,1.); +#78746 = DIRECTION('',(0.,0.,-1.)); +#78747 = ORIENTED_EDGE('',*,*,#78748,.T.); +#78748 = EDGE_CURVE('',#78741,#78685,#78749,.T.); +#78749 = LINE('',#78750,#78751); +#78750 = CARTESIAN_POINT('',(1.81,-1.275,-1.41)); +#78751 = VECTOR('',#78752,1.); +#78752 = DIRECTION('',(0.,-1.,0.)); +#78753 = ORIENTED_EDGE('',*,*,#78682,.F.); +#78754 = ORIENTED_EDGE('',*,*,#78755,.F.); +#78755 = EDGE_CURVE('',#78739,#78683,#78756,.T.); +#78756 = LINE('',#78757,#78758); +#78757 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78758 = VECTOR('',#78759,1.); +#78759 = DIRECTION('',(0.,-1.,0.)); +#78760 = PLANE('',#78761); +#78761 = AXIS2_PLACEMENT_3D('',#78762,#78763,#78764); +#78762 = CARTESIAN_POINT('',(1.81,-1.275,0.19)); +#78763 = DIRECTION('',(-1.,-0.,-0.)); +#78764 = DIRECTION('',(0.,-1.,0.)); +#78765 = ADVANCED_FACE('',(#78766),#78784,.T.); +#78766 = FACE_BOUND('',#78767,.T.); +#78767 = EDGE_LOOP('',(#78768,#78776,#78777,#78778)); +#78768 = ORIENTED_EDGE('',*,*,#78769,.F.); +#78769 = EDGE_CURVE('',#78741,#78770,#78772,.T.); +#78770 = VERTEX_POINT('',#78771); +#78771 = CARTESIAN_POINT('',(1.76,-1.275,-1.61)); +#78772 = LINE('',#78773,#78774); +#78773 = CARTESIAN_POINT('',(1.979264705882,-1.275,-0.732941176471)); +#78774 = VECTOR('',#78775,1.); +#78775 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78776 = ORIENTED_EDGE('',*,*,#78748,.T.); +#78777 = ORIENTED_EDGE('',*,*,#78692,.T.); +#78778 = ORIENTED_EDGE('',*,*,#78779,.F.); +#78779 = EDGE_CURVE('',#78770,#78693,#78780,.T.); +#78780 = LINE('',#78781,#78782); +#78781 = CARTESIAN_POINT('',(1.76,-1.275,-1.61)); +#78782 = VECTOR('',#78783,1.); +#78783 = DIRECTION('',(0.,-1.,0.)); +#78784 = PLANE('',#78785); +#78785 = AXIS2_PLACEMENT_3D('',#78786,#78787,#78788); +#78786 = CARTESIAN_POINT('',(1.785,-1.275,-1.51)); +#78787 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#78788 = DIRECTION('',(0.,-1.,0.)); +#78789 = ADVANCED_FACE('',(#78790),#78808,.T.); +#78790 = FACE_BOUND('',#78791,.F.); +#78791 = EDGE_LOOP('',(#78792,#78793,#78801,#78807)); +#78792 = ORIENTED_EDGE('',*,*,#78724,.T.); +#78793 = ORIENTED_EDGE('',*,*,#78794,.T.); +#78794 = EDGE_CURVE('',#78717,#78795,#78797,.T.); +#78795 = VERTEX_POINT('',#78796); +#78796 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78797 = LINE('',#78798,#78799); +#78798 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78799 = VECTOR('',#78800,1.); +#78800 = DIRECTION('',(0.,1.,0.)); +#78801 = ORIENTED_EDGE('',*,*,#78802,.T.); +#78802 = EDGE_CURVE('',#78795,#78739,#78803,.T.); +#78803 = LINE('',#78804,#78805); +#78804 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78805 = VECTOR('',#78806,1.); +#78806 = DIRECTION('',(1.,0.,0.)); +#78807 = ORIENTED_EDGE('',*,*,#78755,.T.); +#78808 = PLANE('',#78809); +#78809 = AXIS2_PLACEMENT_3D('',#78810,#78811,#78812); +#78810 = CARTESIAN_POINT('',(1.7,-1.35,0.19)); +#78811 = DIRECTION('',(0.,0.,1.)); +#78812 = DIRECTION('',(1.,0.,-0.)); +#78813 = ADVANCED_FACE('',(#78814),#78832,.F.); +#78814 = FACE_BOUND('',#78815,.F.); +#78815 = EDGE_LOOP('',(#78816,#78817,#78818,#78826)); +#78816 = ORIENTED_EDGE('',*,*,#78700,.F.); +#78817 = ORIENTED_EDGE('',*,*,#78779,.F.); +#78818 = ORIENTED_EDGE('',*,*,#78819,.F.); +#78819 = EDGE_CURVE('',#78820,#78770,#78822,.T.); +#78820 = VERTEX_POINT('',#78821); +#78821 = CARTESIAN_POINT('',(1.64,-1.275,-1.61)); +#78822 = LINE('',#78823,#78824); +#78823 = CARTESIAN_POINT('',(1.59,-1.275,-1.61)); +#78824 = VECTOR('',#78825,1.); +#78825 = DIRECTION('',(1.,0.,0.)); +#78826 = ORIENTED_EDGE('',*,*,#78827,.F.); +#78827 = EDGE_CURVE('',#78701,#78820,#78828,.T.); +#78828 = LINE('',#78829,#78830); +#78829 = CARTESIAN_POINT('',(1.64,-1.425,-1.61)); +#78830 = VECTOR('',#78831,1.); +#78831 = DIRECTION('',(0.,1.,0.)); +#78832 = PLANE('',#78833); +#78833 = AXIS2_PLACEMENT_3D('',#78834,#78835,#78836); +#78834 = CARTESIAN_POINT('',(1.7,-1.35,-1.61)); +#78835 = DIRECTION('',(0.,0.,1.)); +#78836 = DIRECTION('',(1.,0.,-0.)); +#78837 = ADVANCED_FACE('',(#78838),#78856,.F.); +#78838 = FACE_BOUND('',#78839,.F.); +#78839 = EDGE_LOOP('',(#78840,#78841,#78849,#78855)); +#78840 = ORIENTED_EDGE('',*,*,#78716,.T.); +#78841 = ORIENTED_EDGE('',*,*,#78842,.T.); +#78842 = EDGE_CURVE('',#78709,#78843,#78845,.T.); +#78843 = VERTEX_POINT('',#78844); +#78844 = CARTESIAN_POINT('',(1.59,-1.275,-1.41)); +#78845 = LINE('',#78846,#78847); +#78846 = CARTESIAN_POINT('',(1.59,-1.425,-1.41)); +#78847 = VECTOR('',#78848,1.); +#78848 = DIRECTION('',(0.,1.,0.)); +#78849 = ORIENTED_EDGE('',*,*,#78850,.F.); +#78850 = EDGE_CURVE('',#78795,#78843,#78851,.T.); +#78851 = LINE('',#78852,#78853); +#78852 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78853 = VECTOR('',#78854,1.); +#78854 = DIRECTION('',(0.,0.,-1.)); +#78855 = ORIENTED_EDGE('',*,*,#78794,.F.); +#78856 = PLANE('',#78857); +#78857 = AXIS2_PLACEMENT_3D('',#78858,#78859,#78860); +#78858 = CARTESIAN_POINT('',(1.59,-1.425,0.19)); +#78859 = DIRECTION('',(1.,0.,0.)); +#78860 = DIRECTION('',(-0.,1.,0.)); +#78861 = ADVANCED_FACE('',(#78862),#78873,.T.); +#78862 = FACE_BOUND('',#78863,.T.); +#78863 = EDGE_LOOP('',(#78864,#78865,#78866,#78872)); +#78864 = ORIENTED_EDGE('',*,*,#78708,.F.); +#78865 = ORIENTED_EDGE('',*,*,#78842,.T.); +#78866 = ORIENTED_EDGE('',*,*,#78867,.T.); +#78867 = EDGE_CURVE('',#78843,#78820,#78868,.T.); +#78868 = LINE('',#78869,#78870); +#78869 = CARTESIAN_POINT('',(1.414264705882,-1.275,-0.707058823529)); +#78870 = VECTOR('',#78871,1.); +#78871 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78872 = ORIENTED_EDGE('',*,*,#78827,.F.); +#78873 = PLANE('',#78874); +#78874 = AXIS2_PLACEMENT_3D('',#78875,#78876,#78877); +#78875 = CARTESIAN_POINT('',(1.615,-1.425,-1.51)); +#78876 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#78877 = DIRECTION('',(0.,1.,0.)); +#78878 = ADVANCED_FACE('',(#78879),#78887,.F.); +#78879 = FACE_BOUND('',#78880,.F.); +#78880 = EDGE_LOOP('',(#78881,#78882,#78883,#78884,#78885,#78886)); +#78881 = ORIENTED_EDGE('',*,*,#78850,.T.); +#78882 = ORIENTED_EDGE('',*,*,#78867,.T.); +#78883 = ORIENTED_EDGE('',*,*,#78819,.T.); +#78884 = ORIENTED_EDGE('',*,*,#78769,.F.); +#78885 = ORIENTED_EDGE('',*,*,#78738,.F.); +#78886 = ORIENTED_EDGE('',*,*,#78802,.F.); +#78887 = PLANE('',#78888); +#78888 = AXIS2_PLACEMENT_3D('',#78889,#78890,#78891); +#78889 = CARTESIAN_POINT('',(1.59,-1.275,0.19)); +#78890 = DIRECTION('',(0.,-1.,0.)); +#78891 = DIRECTION('',(1.,0.,0.)); +#78892 = MANIFOLD_SOLID_BREP('',#78893); +#78893 = CLOSED_SHELL('',(#78894,#78950,#78981,#79005,#79029,#79053, + #79077,#79094)); +#78894 = ADVANCED_FACE('',(#78895),#78945,.F.); +#78895 = FACE_BOUND('',#78896,.F.); +#78896 = EDGE_LOOP('',(#78897,#78907,#78915,#78923,#78931,#78939)); +#78897 = ORIENTED_EDGE('',*,*,#78898,.T.); +#78898 = EDGE_CURVE('',#78899,#78901,#78903,.T.); +#78899 = VERTEX_POINT('',#78900); +#78900 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78901 = VERTEX_POINT('',#78902); +#78902 = CARTESIAN_POINT('',(1.81,-7.5E-02,-1.41)); +#78903 = LINE('',#78904,#78905); +#78904 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78905 = VECTOR('',#78906,1.); +#78906 = DIRECTION('',(0.,0.,-1.)); +#78907 = ORIENTED_EDGE('',*,*,#78908,.T.); +#78908 = EDGE_CURVE('',#78901,#78909,#78911,.T.); +#78909 = VERTEX_POINT('',#78910); +#78910 = CARTESIAN_POINT('',(1.76,-7.5E-02,-1.61)); +#78911 = LINE('',#78912,#78913); +#78912 = CARTESIAN_POINT('',(1.985735294118,-7.5E-02,-0.707058823529)); +#78913 = VECTOR('',#78914,1.); +#78914 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#78915 = ORIENTED_EDGE('',*,*,#78916,.T.); +#78916 = EDGE_CURVE('',#78909,#78917,#78919,.T.); +#78917 = VERTEX_POINT('',#78918); +#78918 = CARTESIAN_POINT('',(1.64,-7.5E-02,-1.61)); +#78919 = LINE('',#78920,#78921); +#78920 = CARTESIAN_POINT('',(1.81,-7.5E-02,-1.61)); +#78921 = VECTOR('',#78922,1.); +#78922 = DIRECTION('',(-1.,0.,0.)); +#78923 = ORIENTED_EDGE('',*,*,#78924,.F.); +#78924 = EDGE_CURVE('',#78925,#78917,#78927,.T.); +#78925 = VERTEX_POINT('',#78926); +#78926 = CARTESIAN_POINT('',(1.59,-7.5E-02,-1.41)); +#78927 = LINE('',#78928,#78929); +#78928 = CARTESIAN_POINT('',(1.420735294118,-7.5E-02,-0.732941176471)); +#78929 = VECTOR('',#78930,1.); +#78930 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#78931 = ORIENTED_EDGE('',*,*,#78932,.F.); +#78932 = EDGE_CURVE('',#78933,#78925,#78935,.T.); +#78933 = VERTEX_POINT('',#78934); +#78934 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#78935 = LINE('',#78936,#78937); +#78936 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#78937 = VECTOR('',#78938,1.); +#78938 = DIRECTION('',(0.,0.,-1.)); +#78939 = ORIENTED_EDGE('',*,*,#78940,.F.); +#78940 = EDGE_CURVE('',#78899,#78933,#78941,.T.); +#78941 = LINE('',#78942,#78943); +#78942 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78943 = VECTOR('',#78944,1.); +#78944 = DIRECTION('',(-1.,0.,0.)); +#78945 = PLANE('',#78946); +#78946 = AXIS2_PLACEMENT_3D('',#78947,#78948,#78949); +#78947 = CARTESIAN_POINT('',(1.81,-7.5E-02,0.19)); +#78948 = DIRECTION('',(0.,1.,0.)); +#78949 = DIRECTION('',(-1.,0.,0.)); +#78950 = ADVANCED_FACE('',(#78951),#78976,.F.); +#78951 = FACE_BOUND('',#78952,.F.); +#78952 = EDGE_LOOP('',(#78953,#78963,#78969,#78970)); +#78953 = ORIENTED_EDGE('',*,*,#78954,.T.); +#78954 = EDGE_CURVE('',#78955,#78957,#78959,.T.); +#78955 = VERTEX_POINT('',#78956); +#78956 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78957 = VERTEX_POINT('',#78958); +#78958 = CARTESIAN_POINT('',(1.81,7.5E-02,-1.41)); +#78959 = LINE('',#78960,#78961); +#78960 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78961 = VECTOR('',#78962,1.); +#78962 = DIRECTION('',(0.,0.,-1.)); +#78963 = ORIENTED_EDGE('',*,*,#78964,.T.); +#78964 = EDGE_CURVE('',#78957,#78901,#78965,.T.); +#78965 = LINE('',#78966,#78967); +#78966 = CARTESIAN_POINT('',(1.81,7.5E-02,-1.41)); +#78967 = VECTOR('',#78968,1.); +#78968 = DIRECTION('',(0.,-1.,0.)); +#78969 = ORIENTED_EDGE('',*,*,#78898,.F.); +#78970 = ORIENTED_EDGE('',*,*,#78971,.F.); +#78971 = EDGE_CURVE('',#78955,#78899,#78972,.T.); +#78972 = LINE('',#78973,#78974); +#78973 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78974 = VECTOR('',#78975,1.); +#78975 = DIRECTION('',(0.,-1.,0.)); +#78976 = PLANE('',#78977); +#78977 = AXIS2_PLACEMENT_3D('',#78978,#78979,#78980); +#78978 = CARTESIAN_POINT('',(1.81,7.5E-02,0.19)); +#78979 = DIRECTION('',(-1.,-0.,-0.)); +#78980 = DIRECTION('',(0.,-1.,0.)); +#78981 = ADVANCED_FACE('',(#78982),#79000,.T.); +#78982 = FACE_BOUND('',#78983,.T.); +#78983 = EDGE_LOOP('',(#78984,#78992,#78993,#78994)); +#78984 = ORIENTED_EDGE('',*,*,#78985,.F.); +#78985 = EDGE_CURVE('',#78957,#78986,#78988,.T.); +#78986 = VERTEX_POINT('',#78987); +#78987 = CARTESIAN_POINT('',(1.76,7.5E-02,-1.61)); +#78988 = LINE('',#78989,#78990); +#78989 = CARTESIAN_POINT('',(1.979264705882,7.5E-02,-0.732941176471)); +#78990 = VECTOR('',#78991,1.); +#78991 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#78992 = ORIENTED_EDGE('',*,*,#78964,.T.); +#78993 = ORIENTED_EDGE('',*,*,#78908,.T.); +#78994 = ORIENTED_EDGE('',*,*,#78995,.F.); +#78995 = EDGE_CURVE('',#78986,#78909,#78996,.T.); +#78996 = LINE('',#78997,#78998); +#78997 = CARTESIAN_POINT('',(1.76,7.5E-02,-1.61)); +#78998 = VECTOR('',#78999,1.); +#78999 = DIRECTION('',(0.,-1.,0.)); +#79000 = PLANE('',#79001); +#79001 = AXIS2_PLACEMENT_3D('',#79002,#79003,#79004); +#79002 = CARTESIAN_POINT('',(1.785,7.5E-02,-1.51)); +#79003 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79004 = DIRECTION('',(0.,-1.,0.)); +#79005 = ADVANCED_FACE('',(#79006),#79024,.T.); +#79006 = FACE_BOUND('',#79007,.F.); +#79007 = EDGE_LOOP('',(#79008,#79009,#79017,#79023)); +#79008 = ORIENTED_EDGE('',*,*,#78940,.T.); +#79009 = ORIENTED_EDGE('',*,*,#79010,.T.); +#79010 = EDGE_CURVE('',#78933,#79011,#79013,.T.); +#79011 = VERTEX_POINT('',#79012); +#79012 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79013 = LINE('',#79014,#79015); +#79014 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#79015 = VECTOR('',#79016,1.); +#79016 = DIRECTION('',(0.,1.,0.)); +#79017 = ORIENTED_EDGE('',*,*,#79018,.T.); +#79018 = EDGE_CURVE('',#79011,#78955,#79019,.T.); +#79019 = LINE('',#79020,#79021); +#79020 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79021 = VECTOR('',#79022,1.); +#79022 = DIRECTION('',(1.,0.,0.)); +#79023 = ORIENTED_EDGE('',*,*,#78971,.T.); +#79024 = PLANE('',#79025); +#79025 = AXIS2_PLACEMENT_3D('',#79026,#79027,#79028); +#79026 = CARTESIAN_POINT('',(1.7,0.,0.19)); +#79027 = DIRECTION('',(0.,0.,1.)); +#79028 = DIRECTION('',(1.,0.,-0.)); +#79029 = ADVANCED_FACE('',(#79030),#79048,.F.); +#79030 = FACE_BOUND('',#79031,.F.); +#79031 = EDGE_LOOP('',(#79032,#79033,#79034,#79042)); +#79032 = ORIENTED_EDGE('',*,*,#78916,.F.); +#79033 = ORIENTED_EDGE('',*,*,#78995,.F.); +#79034 = ORIENTED_EDGE('',*,*,#79035,.F.); +#79035 = EDGE_CURVE('',#79036,#78986,#79038,.T.); +#79036 = VERTEX_POINT('',#79037); +#79037 = CARTESIAN_POINT('',(1.64,7.5E-02,-1.61)); +#79038 = LINE('',#79039,#79040); +#79039 = CARTESIAN_POINT('',(1.59,7.5E-02,-1.61)); +#79040 = VECTOR('',#79041,1.); +#79041 = DIRECTION('',(1.,0.,0.)); +#79042 = ORIENTED_EDGE('',*,*,#79043,.F.); +#79043 = EDGE_CURVE('',#78917,#79036,#79044,.T.); +#79044 = LINE('',#79045,#79046); +#79045 = CARTESIAN_POINT('',(1.64,-7.5E-02,-1.61)); +#79046 = VECTOR('',#79047,1.); +#79047 = DIRECTION('',(0.,1.,0.)); +#79048 = PLANE('',#79049); +#79049 = AXIS2_PLACEMENT_3D('',#79050,#79051,#79052); +#79050 = CARTESIAN_POINT('',(1.7,0.,-1.61)); +#79051 = DIRECTION('',(0.,0.,1.)); +#79052 = DIRECTION('',(1.,0.,-0.)); +#79053 = ADVANCED_FACE('',(#79054),#79072,.F.); +#79054 = FACE_BOUND('',#79055,.F.); +#79055 = EDGE_LOOP('',(#79056,#79057,#79065,#79071)); +#79056 = ORIENTED_EDGE('',*,*,#78932,.T.); +#79057 = ORIENTED_EDGE('',*,*,#79058,.T.); +#79058 = EDGE_CURVE('',#78925,#79059,#79061,.T.); +#79059 = VERTEX_POINT('',#79060); +#79060 = CARTESIAN_POINT('',(1.59,7.5E-02,-1.41)); +#79061 = LINE('',#79062,#79063); +#79062 = CARTESIAN_POINT('',(1.59,-7.5E-02,-1.41)); +#79063 = VECTOR('',#79064,1.); +#79064 = DIRECTION('',(0.,1.,0.)); +#79065 = ORIENTED_EDGE('',*,*,#79066,.F.); +#79066 = EDGE_CURVE('',#79011,#79059,#79067,.T.); +#79067 = LINE('',#79068,#79069); +#79068 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79069 = VECTOR('',#79070,1.); +#79070 = DIRECTION('',(0.,0.,-1.)); +#79071 = ORIENTED_EDGE('',*,*,#79010,.F.); +#79072 = PLANE('',#79073); +#79073 = AXIS2_PLACEMENT_3D('',#79074,#79075,#79076); +#79074 = CARTESIAN_POINT('',(1.59,-7.5E-02,0.19)); +#79075 = DIRECTION('',(1.,0.,0.)); +#79076 = DIRECTION('',(-0.,1.,0.)); +#79077 = ADVANCED_FACE('',(#79078),#79089,.T.); +#79078 = FACE_BOUND('',#79079,.T.); +#79079 = EDGE_LOOP('',(#79080,#79081,#79082,#79088)); +#79080 = ORIENTED_EDGE('',*,*,#78924,.F.); +#79081 = ORIENTED_EDGE('',*,*,#79058,.T.); +#79082 = ORIENTED_EDGE('',*,*,#79083,.T.); +#79083 = EDGE_CURVE('',#79059,#79036,#79084,.T.); +#79084 = LINE('',#79085,#79086); +#79085 = CARTESIAN_POINT('',(1.414264705882,7.5E-02,-0.707058823529)); +#79086 = VECTOR('',#79087,1.); +#79087 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79088 = ORIENTED_EDGE('',*,*,#79043,.F.); +#79089 = PLANE('',#79090); +#79090 = AXIS2_PLACEMENT_3D('',#79091,#79092,#79093); +#79091 = CARTESIAN_POINT('',(1.615,-7.5E-02,-1.51)); +#79092 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79093 = DIRECTION('',(0.,1.,0.)); +#79094 = ADVANCED_FACE('',(#79095),#79103,.F.); +#79095 = FACE_BOUND('',#79096,.F.); +#79096 = EDGE_LOOP('',(#79097,#79098,#79099,#79100,#79101,#79102)); +#79097 = ORIENTED_EDGE('',*,*,#79066,.T.); +#79098 = ORIENTED_EDGE('',*,*,#79083,.T.); +#79099 = ORIENTED_EDGE('',*,*,#79035,.T.); +#79100 = ORIENTED_EDGE('',*,*,#78985,.F.); +#79101 = ORIENTED_EDGE('',*,*,#78954,.F.); +#79102 = ORIENTED_EDGE('',*,*,#79018,.F.); +#79103 = PLANE('',#79104); +#79104 = AXIS2_PLACEMENT_3D('',#79105,#79106,#79107); +#79105 = CARTESIAN_POINT('',(1.59,7.5E-02,0.19)); +#79106 = DIRECTION('',(0.,-1.,0.)); +#79107 = DIRECTION('',(1.,0.,0.)); +#79108 = MANIFOLD_SOLID_BREP('',#79109); +#79109 = CLOSED_SHELL('',(#79110,#79166,#79197,#79221,#79245,#79269, + #79293,#79310)); +#79110 = ADVANCED_FACE('',(#79111),#79161,.F.); +#79111 = FACE_BOUND('',#79112,.F.); +#79112 = EDGE_LOOP('',(#79113,#79123,#79131,#79139,#79147,#79155)); +#79113 = ORIENTED_EDGE('',*,*,#79114,.T.); +#79114 = EDGE_CURVE('',#79115,#79117,#79119,.T.); +#79115 = VERTEX_POINT('',#79116); +#79116 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79117 = VERTEX_POINT('',#79118); +#79118 = CARTESIAN_POINT('',(2.66,-1.425,-1.41)); +#79119 = LINE('',#79120,#79121); +#79120 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79121 = VECTOR('',#79122,1.); +#79122 = DIRECTION('',(0.,0.,-1.)); +#79123 = ORIENTED_EDGE('',*,*,#79124,.T.); +#79124 = EDGE_CURVE('',#79117,#79125,#79127,.T.); +#79125 = VERTEX_POINT('',#79126); +#79126 = CARTESIAN_POINT('',(2.61,-1.425,-1.61)); +#79127 = LINE('',#79128,#79129); +#79128 = CARTESIAN_POINT('',(2.835735294118,-1.425,-0.707058823529)); +#79129 = VECTOR('',#79130,1.); +#79130 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79131 = ORIENTED_EDGE('',*,*,#79132,.T.); +#79132 = EDGE_CURVE('',#79125,#79133,#79135,.T.); +#79133 = VERTEX_POINT('',#79134); +#79134 = CARTESIAN_POINT('',(2.49,-1.425,-1.61)); +#79135 = LINE('',#79136,#79137); +#79136 = CARTESIAN_POINT('',(2.66,-1.425,-1.61)); +#79137 = VECTOR('',#79138,1.); +#79138 = DIRECTION('',(-1.,0.,0.)); +#79139 = ORIENTED_EDGE('',*,*,#79140,.F.); +#79140 = EDGE_CURVE('',#79141,#79133,#79143,.T.); +#79141 = VERTEX_POINT('',#79142); +#79142 = CARTESIAN_POINT('',(2.44,-1.425,-1.41)); +#79143 = LINE('',#79144,#79145); +#79144 = CARTESIAN_POINT('',(2.270735294118,-1.425,-0.732941176471)); +#79145 = VECTOR('',#79146,1.); +#79146 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79147 = ORIENTED_EDGE('',*,*,#79148,.F.); +#79148 = EDGE_CURVE('',#79149,#79141,#79151,.T.); +#79149 = VERTEX_POINT('',#79150); +#79150 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79151 = LINE('',#79152,#79153); +#79152 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79153 = VECTOR('',#79154,1.); +#79154 = DIRECTION('',(0.,0.,-1.)); +#79155 = ORIENTED_EDGE('',*,*,#79156,.F.); +#79156 = EDGE_CURVE('',#79115,#79149,#79157,.T.); +#79157 = LINE('',#79158,#79159); +#79158 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79159 = VECTOR('',#79160,1.); +#79160 = DIRECTION('',(-1.,0.,0.)); +#79161 = PLANE('',#79162); +#79162 = AXIS2_PLACEMENT_3D('',#79163,#79164,#79165); +#79163 = CARTESIAN_POINT('',(2.66,-1.425,0.19)); +#79164 = DIRECTION('',(0.,1.,0.)); +#79165 = DIRECTION('',(-1.,0.,0.)); +#79166 = ADVANCED_FACE('',(#79167),#79192,.F.); +#79167 = FACE_BOUND('',#79168,.F.); +#79168 = EDGE_LOOP('',(#79169,#79179,#79185,#79186)); +#79169 = ORIENTED_EDGE('',*,*,#79170,.T.); +#79170 = EDGE_CURVE('',#79171,#79173,#79175,.T.); +#79171 = VERTEX_POINT('',#79172); +#79172 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79173 = VERTEX_POINT('',#79174); +#79174 = CARTESIAN_POINT('',(2.66,-1.275,-1.41)); +#79175 = LINE('',#79176,#79177); +#79176 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79177 = VECTOR('',#79178,1.); +#79178 = DIRECTION('',(0.,0.,-1.)); +#79179 = ORIENTED_EDGE('',*,*,#79180,.T.); +#79180 = EDGE_CURVE('',#79173,#79117,#79181,.T.); +#79181 = LINE('',#79182,#79183); +#79182 = CARTESIAN_POINT('',(2.66,-1.275,-1.41)); +#79183 = VECTOR('',#79184,1.); +#79184 = DIRECTION('',(0.,-1.,0.)); +#79185 = ORIENTED_EDGE('',*,*,#79114,.F.); +#79186 = ORIENTED_EDGE('',*,*,#79187,.F.); +#79187 = EDGE_CURVE('',#79171,#79115,#79188,.T.); +#79188 = LINE('',#79189,#79190); +#79189 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79190 = VECTOR('',#79191,1.); +#79191 = DIRECTION('',(0.,-1.,0.)); +#79192 = PLANE('',#79193); +#79193 = AXIS2_PLACEMENT_3D('',#79194,#79195,#79196); +#79194 = CARTESIAN_POINT('',(2.66,-1.275,0.19)); +#79195 = DIRECTION('',(-1.,-0.,-0.)); +#79196 = DIRECTION('',(0.,-1.,0.)); +#79197 = ADVANCED_FACE('',(#79198),#79216,.T.); +#79198 = FACE_BOUND('',#79199,.T.); +#79199 = EDGE_LOOP('',(#79200,#79208,#79209,#79210)); +#79200 = ORIENTED_EDGE('',*,*,#79201,.F.); +#79201 = EDGE_CURVE('',#79173,#79202,#79204,.T.); +#79202 = VERTEX_POINT('',#79203); +#79203 = CARTESIAN_POINT('',(2.61,-1.275,-1.61)); +#79204 = LINE('',#79205,#79206); +#79205 = CARTESIAN_POINT('',(2.829264705882,-1.275,-0.732941176471)); +#79206 = VECTOR('',#79207,1.); +#79207 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79208 = ORIENTED_EDGE('',*,*,#79180,.T.); +#79209 = ORIENTED_EDGE('',*,*,#79124,.T.); +#79210 = ORIENTED_EDGE('',*,*,#79211,.F.); +#79211 = EDGE_CURVE('',#79202,#79125,#79212,.T.); +#79212 = LINE('',#79213,#79214); +#79213 = CARTESIAN_POINT('',(2.61,-1.275,-1.61)); +#79214 = VECTOR('',#79215,1.); +#79215 = DIRECTION('',(0.,-1.,0.)); +#79216 = PLANE('',#79217); +#79217 = AXIS2_PLACEMENT_3D('',#79218,#79219,#79220); +#79218 = CARTESIAN_POINT('',(2.635,-1.275,-1.51)); +#79219 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79220 = DIRECTION('',(0.,-1.,0.)); +#79221 = ADVANCED_FACE('',(#79222),#79240,.T.); +#79222 = FACE_BOUND('',#79223,.F.); +#79223 = EDGE_LOOP('',(#79224,#79225,#79233,#79239)); +#79224 = ORIENTED_EDGE('',*,*,#79156,.T.); +#79225 = ORIENTED_EDGE('',*,*,#79226,.T.); +#79226 = EDGE_CURVE('',#79149,#79227,#79229,.T.); +#79227 = VERTEX_POINT('',#79228); +#79228 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79229 = LINE('',#79230,#79231); +#79230 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79231 = VECTOR('',#79232,1.); +#79232 = DIRECTION('',(0.,1.,0.)); +#79233 = ORIENTED_EDGE('',*,*,#79234,.T.); +#79234 = EDGE_CURVE('',#79227,#79171,#79235,.T.); +#79235 = LINE('',#79236,#79237); +#79236 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79237 = VECTOR('',#79238,1.); +#79238 = DIRECTION('',(1.,0.,0.)); +#79239 = ORIENTED_EDGE('',*,*,#79187,.T.); +#79240 = PLANE('',#79241); +#79241 = AXIS2_PLACEMENT_3D('',#79242,#79243,#79244); +#79242 = CARTESIAN_POINT('',(2.55,-1.35,0.19)); +#79243 = DIRECTION('',(0.,0.,1.)); +#79244 = DIRECTION('',(1.,0.,-0.)); +#79245 = ADVANCED_FACE('',(#79246),#79264,.F.); +#79246 = FACE_BOUND('',#79247,.F.); +#79247 = EDGE_LOOP('',(#79248,#79249,#79250,#79258)); +#79248 = ORIENTED_EDGE('',*,*,#79132,.F.); +#79249 = ORIENTED_EDGE('',*,*,#79211,.F.); +#79250 = ORIENTED_EDGE('',*,*,#79251,.F.); +#79251 = EDGE_CURVE('',#79252,#79202,#79254,.T.); +#79252 = VERTEX_POINT('',#79253); +#79253 = CARTESIAN_POINT('',(2.49,-1.275,-1.61)); +#79254 = LINE('',#79255,#79256); +#79255 = CARTESIAN_POINT('',(2.44,-1.275,-1.61)); +#79256 = VECTOR('',#79257,1.); +#79257 = DIRECTION('',(1.,0.,0.)); +#79258 = ORIENTED_EDGE('',*,*,#79259,.F.); +#79259 = EDGE_CURVE('',#79133,#79252,#79260,.T.); +#79260 = LINE('',#79261,#79262); +#79261 = CARTESIAN_POINT('',(2.49,-1.425,-1.61)); +#79262 = VECTOR('',#79263,1.); +#79263 = DIRECTION('',(0.,1.,0.)); +#79264 = PLANE('',#79265); +#79265 = AXIS2_PLACEMENT_3D('',#79266,#79267,#79268); +#79266 = CARTESIAN_POINT('',(2.55,-1.35,-1.61)); +#79267 = DIRECTION('',(0.,0.,1.)); +#79268 = DIRECTION('',(1.,0.,-0.)); +#79269 = ADVANCED_FACE('',(#79270),#79288,.F.); +#79270 = FACE_BOUND('',#79271,.F.); +#79271 = EDGE_LOOP('',(#79272,#79273,#79281,#79287)); +#79272 = ORIENTED_EDGE('',*,*,#79148,.T.); +#79273 = ORIENTED_EDGE('',*,*,#79274,.T.); +#79274 = EDGE_CURVE('',#79141,#79275,#79277,.T.); +#79275 = VERTEX_POINT('',#79276); +#79276 = CARTESIAN_POINT('',(2.44,-1.275,-1.41)); +#79277 = LINE('',#79278,#79279); +#79278 = CARTESIAN_POINT('',(2.44,-1.425,-1.41)); +#79279 = VECTOR('',#79280,1.); +#79280 = DIRECTION('',(0.,1.,0.)); +#79281 = ORIENTED_EDGE('',*,*,#79282,.F.); +#79282 = EDGE_CURVE('',#79227,#79275,#79283,.T.); +#79283 = LINE('',#79284,#79285); +#79284 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79285 = VECTOR('',#79286,1.); +#79286 = DIRECTION('',(0.,0.,-1.)); +#79287 = ORIENTED_EDGE('',*,*,#79226,.F.); +#79288 = PLANE('',#79289); +#79289 = AXIS2_PLACEMENT_3D('',#79290,#79291,#79292); +#79290 = CARTESIAN_POINT('',(2.44,-1.425,0.19)); +#79291 = DIRECTION('',(1.,0.,0.)); +#79292 = DIRECTION('',(-0.,1.,0.)); +#79293 = ADVANCED_FACE('',(#79294),#79305,.T.); +#79294 = FACE_BOUND('',#79295,.T.); +#79295 = EDGE_LOOP('',(#79296,#79297,#79298,#79304)); +#79296 = ORIENTED_EDGE('',*,*,#79140,.F.); +#79297 = ORIENTED_EDGE('',*,*,#79274,.T.); +#79298 = ORIENTED_EDGE('',*,*,#79299,.T.); +#79299 = EDGE_CURVE('',#79275,#79252,#79300,.T.); +#79300 = LINE('',#79301,#79302); +#79301 = CARTESIAN_POINT('',(2.264264705882,-1.275,-0.707058823529)); +#79302 = VECTOR('',#79303,1.); +#79303 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79304 = ORIENTED_EDGE('',*,*,#79259,.F.); +#79305 = PLANE('',#79306); +#79306 = AXIS2_PLACEMENT_3D('',#79307,#79308,#79309); +#79307 = CARTESIAN_POINT('',(2.465,-1.425,-1.51)); +#79308 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79309 = DIRECTION('',(0.,1.,0.)); +#79310 = ADVANCED_FACE('',(#79311),#79319,.F.); +#79311 = FACE_BOUND('',#79312,.F.); +#79312 = EDGE_LOOP('',(#79313,#79314,#79315,#79316,#79317,#79318)); +#79313 = ORIENTED_EDGE('',*,*,#79282,.T.); +#79314 = ORIENTED_EDGE('',*,*,#79299,.T.); +#79315 = ORIENTED_EDGE('',*,*,#79251,.T.); +#79316 = ORIENTED_EDGE('',*,*,#79201,.F.); +#79317 = ORIENTED_EDGE('',*,*,#79170,.F.); +#79318 = ORIENTED_EDGE('',*,*,#79234,.F.); +#79319 = PLANE('',#79320); +#79320 = AXIS2_PLACEMENT_3D('',#79321,#79322,#79323); +#79321 = CARTESIAN_POINT('',(2.44,-1.275,0.19)); +#79322 = DIRECTION('',(0.,-1.,0.)); +#79323 = DIRECTION('',(1.,0.,0.)); +#79324 = MANIFOLD_SOLID_BREP('',#79325); +#79325 = CLOSED_SHELL('',(#79326,#79382,#79413,#79437,#79461,#79485, + #79509,#79526)); +#79326 = ADVANCED_FACE('',(#79327),#79377,.F.); +#79327 = FACE_BOUND('',#79328,.F.); +#79328 = EDGE_LOOP('',(#79329,#79339,#79347,#79355,#79363,#79371)); +#79329 = ORIENTED_EDGE('',*,*,#79330,.T.); +#79330 = EDGE_CURVE('',#79331,#79333,#79335,.T.); +#79331 = VERTEX_POINT('',#79332); +#79332 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79333 = VERTEX_POINT('',#79334); +#79334 = CARTESIAN_POINT('',(2.66,-7.5E-02,-1.41)); +#79335 = LINE('',#79336,#79337); +#79336 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79337 = VECTOR('',#79338,1.); +#79338 = DIRECTION('',(0.,0.,-1.)); +#79339 = ORIENTED_EDGE('',*,*,#79340,.T.); +#79340 = EDGE_CURVE('',#79333,#79341,#79343,.T.); +#79341 = VERTEX_POINT('',#79342); +#79342 = CARTESIAN_POINT('',(2.61,-7.5E-02,-1.61)); +#79343 = LINE('',#79344,#79345); +#79344 = CARTESIAN_POINT('',(2.835735294118,-7.5E-02,-0.707058823529)); +#79345 = VECTOR('',#79346,1.); +#79346 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79347 = ORIENTED_EDGE('',*,*,#79348,.T.); +#79348 = EDGE_CURVE('',#79341,#79349,#79351,.T.); +#79349 = VERTEX_POINT('',#79350); +#79350 = CARTESIAN_POINT('',(2.49,-7.5E-02,-1.61)); +#79351 = LINE('',#79352,#79353); +#79352 = CARTESIAN_POINT('',(2.66,-7.5E-02,-1.61)); +#79353 = VECTOR('',#79354,1.); +#79354 = DIRECTION('',(-1.,0.,0.)); +#79355 = ORIENTED_EDGE('',*,*,#79356,.F.); +#79356 = EDGE_CURVE('',#79357,#79349,#79359,.T.); +#79357 = VERTEX_POINT('',#79358); +#79358 = CARTESIAN_POINT('',(2.44,-7.5E-02,-1.41)); +#79359 = LINE('',#79360,#79361); +#79360 = CARTESIAN_POINT('',(2.270735294118,-7.5E-02,-0.732941176471)); +#79361 = VECTOR('',#79362,1.); +#79362 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79363 = ORIENTED_EDGE('',*,*,#79364,.F.); +#79364 = EDGE_CURVE('',#79365,#79357,#79367,.T.); +#79365 = VERTEX_POINT('',#79366); +#79366 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79367 = LINE('',#79368,#79369); +#79368 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79369 = VECTOR('',#79370,1.); +#79370 = DIRECTION('',(0.,0.,-1.)); +#79371 = ORIENTED_EDGE('',*,*,#79372,.F.); +#79372 = EDGE_CURVE('',#79331,#79365,#79373,.T.); +#79373 = LINE('',#79374,#79375); +#79374 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79375 = VECTOR('',#79376,1.); +#79376 = DIRECTION('',(-1.,0.,0.)); +#79377 = PLANE('',#79378); +#79378 = AXIS2_PLACEMENT_3D('',#79379,#79380,#79381); +#79379 = CARTESIAN_POINT('',(2.66,-7.5E-02,0.19)); +#79380 = DIRECTION('',(0.,1.,0.)); +#79381 = DIRECTION('',(-1.,0.,0.)); +#79382 = ADVANCED_FACE('',(#79383),#79408,.F.); +#79383 = FACE_BOUND('',#79384,.F.); +#79384 = EDGE_LOOP('',(#79385,#79395,#79401,#79402)); +#79385 = ORIENTED_EDGE('',*,*,#79386,.T.); +#79386 = EDGE_CURVE('',#79387,#79389,#79391,.T.); +#79387 = VERTEX_POINT('',#79388); +#79388 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79389 = VERTEX_POINT('',#79390); +#79390 = CARTESIAN_POINT('',(2.66,7.5E-02,-1.41)); +#79391 = LINE('',#79392,#79393); +#79392 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79393 = VECTOR('',#79394,1.); +#79394 = DIRECTION('',(0.,0.,-1.)); +#79395 = ORIENTED_EDGE('',*,*,#79396,.T.); +#79396 = EDGE_CURVE('',#79389,#79333,#79397,.T.); +#79397 = LINE('',#79398,#79399); +#79398 = CARTESIAN_POINT('',(2.66,7.5E-02,-1.41)); +#79399 = VECTOR('',#79400,1.); +#79400 = DIRECTION('',(0.,-1.,0.)); +#79401 = ORIENTED_EDGE('',*,*,#79330,.F.); +#79402 = ORIENTED_EDGE('',*,*,#79403,.F.); +#79403 = EDGE_CURVE('',#79387,#79331,#79404,.T.); +#79404 = LINE('',#79405,#79406); +#79405 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79406 = VECTOR('',#79407,1.); +#79407 = DIRECTION('',(0.,-1.,0.)); +#79408 = PLANE('',#79409); +#79409 = AXIS2_PLACEMENT_3D('',#79410,#79411,#79412); +#79410 = CARTESIAN_POINT('',(2.66,7.5E-02,0.19)); +#79411 = DIRECTION('',(-1.,-0.,-0.)); +#79412 = DIRECTION('',(0.,-1.,0.)); +#79413 = ADVANCED_FACE('',(#79414),#79432,.T.); +#79414 = FACE_BOUND('',#79415,.T.); +#79415 = EDGE_LOOP('',(#79416,#79424,#79425,#79426)); +#79416 = ORIENTED_EDGE('',*,*,#79417,.F.); +#79417 = EDGE_CURVE('',#79389,#79418,#79420,.T.); +#79418 = VERTEX_POINT('',#79419); +#79419 = CARTESIAN_POINT('',(2.61,7.5E-02,-1.61)); +#79420 = LINE('',#79421,#79422); +#79421 = CARTESIAN_POINT('',(2.829264705882,7.5E-02,-0.732941176471)); +#79422 = VECTOR('',#79423,1.); +#79423 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79424 = ORIENTED_EDGE('',*,*,#79396,.T.); +#79425 = ORIENTED_EDGE('',*,*,#79340,.T.); +#79426 = ORIENTED_EDGE('',*,*,#79427,.F.); +#79427 = EDGE_CURVE('',#79418,#79341,#79428,.T.); +#79428 = LINE('',#79429,#79430); +#79429 = CARTESIAN_POINT('',(2.61,7.5E-02,-1.61)); +#79430 = VECTOR('',#79431,1.); +#79431 = DIRECTION('',(0.,-1.,0.)); +#79432 = PLANE('',#79433); +#79433 = AXIS2_PLACEMENT_3D('',#79434,#79435,#79436); +#79434 = CARTESIAN_POINT('',(2.635,7.5E-02,-1.51)); +#79435 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79436 = DIRECTION('',(0.,-1.,0.)); +#79437 = ADVANCED_FACE('',(#79438),#79456,.T.); +#79438 = FACE_BOUND('',#79439,.F.); +#79439 = EDGE_LOOP('',(#79440,#79441,#79449,#79455)); +#79440 = ORIENTED_EDGE('',*,*,#79372,.T.); +#79441 = ORIENTED_EDGE('',*,*,#79442,.T.); +#79442 = EDGE_CURVE('',#79365,#79443,#79445,.T.); +#79443 = VERTEX_POINT('',#79444); +#79444 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79445 = LINE('',#79446,#79447); +#79446 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79447 = VECTOR('',#79448,1.); +#79448 = DIRECTION('',(0.,1.,0.)); +#79449 = ORIENTED_EDGE('',*,*,#79450,.T.); +#79450 = EDGE_CURVE('',#79443,#79387,#79451,.T.); +#79451 = LINE('',#79452,#79453); +#79452 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79453 = VECTOR('',#79454,1.); +#79454 = DIRECTION('',(1.,0.,0.)); +#79455 = ORIENTED_EDGE('',*,*,#79403,.T.); +#79456 = PLANE('',#79457); +#79457 = AXIS2_PLACEMENT_3D('',#79458,#79459,#79460); +#79458 = CARTESIAN_POINT('',(2.55,0.,0.19)); +#79459 = DIRECTION('',(0.,0.,1.)); +#79460 = DIRECTION('',(1.,0.,-0.)); +#79461 = ADVANCED_FACE('',(#79462),#79480,.F.); +#79462 = FACE_BOUND('',#79463,.F.); +#79463 = EDGE_LOOP('',(#79464,#79465,#79466,#79474)); +#79464 = ORIENTED_EDGE('',*,*,#79348,.F.); +#79465 = ORIENTED_EDGE('',*,*,#79427,.F.); +#79466 = ORIENTED_EDGE('',*,*,#79467,.F.); +#79467 = EDGE_CURVE('',#79468,#79418,#79470,.T.); +#79468 = VERTEX_POINT('',#79469); +#79469 = CARTESIAN_POINT('',(2.49,7.5E-02,-1.61)); +#79470 = LINE('',#79471,#79472); +#79471 = CARTESIAN_POINT('',(2.44,7.5E-02,-1.61)); +#79472 = VECTOR('',#79473,1.); +#79473 = DIRECTION('',(1.,0.,0.)); +#79474 = ORIENTED_EDGE('',*,*,#79475,.F.); +#79475 = EDGE_CURVE('',#79349,#79468,#79476,.T.); +#79476 = LINE('',#79477,#79478); +#79477 = CARTESIAN_POINT('',(2.49,-7.5E-02,-1.61)); +#79478 = VECTOR('',#79479,1.); +#79479 = DIRECTION('',(0.,1.,0.)); +#79480 = PLANE('',#79481); +#79481 = AXIS2_PLACEMENT_3D('',#79482,#79483,#79484); +#79482 = CARTESIAN_POINT('',(2.55,0.,-1.61)); +#79483 = DIRECTION('',(0.,0.,1.)); +#79484 = DIRECTION('',(1.,0.,-0.)); +#79485 = ADVANCED_FACE('',(#79486),#79504,.F.); +#79486 = FACE_BOUND('',#79487,.F.); +#79487 = EDGE_LOOP('',(#79488,#79489,#79497,#79503)); +#79488 = ORIENTED_EDGE('',*,*,#79364,.T.); +#79489 = ORIENTED_EDGE('',*,*,#79490,.T.); +#79490 = EDGE_CURVE('',#79357,#79491,#79493,.T.); +#79491 = VERTEX_POINT('',#79492); +#79492 = CARTESIAN_POINT('',(2.44,7.5E-02,-1.41)); +#79493 = LINE('',#79494,#79495); +#79494 = CARTESIAN_POINT('',(2.44,-7.5E-02,-1.41)); +#79495 = VECTOR('',#79496,1.); +#79496 = DIRECTION('',(0.,1.,0.)); +#79497 = ORIENTED_EDGE('',*,*,#79498,.F.); +#79498 = EDGE_CURVE('',#79443,#79491,#79499,.T.); +#79499 = LINE('',#79500,#79501); +#79500 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79501 = VECTOR('',#79502,1.); +#79502 = DIRECTION('',(0.,0.,-1.)); +#79503 = ORIENTED_EDGE('',*,*,#79442,.F.); +#79504 = PLANE('',#79505); +#79505 = AXIS2_PLACEMENT_3D('',#79506,#79507,#79508); +#79506 = CARTESIAN_POINT('',(2.44,-7.5E-02,0.19)); +#79507 = DIRECTION('',(1.,0.,0.)); +#79508 = DIRECTION('',(-0.,1.,0.)); +#79509 = ADVANCED_FACE('',(#79510),#79521,.T.); +#79510 = FACE_BOUND('',#79511,.T.); +#79511 = EDGE_LOOP('',(#79512,#79513,#79514,#79520)); +#79512 = ORIENTED_EDGE('',*,*,#79356,.F.); +#79513 = ORIENTED_EDGE('',*,*,#79490,.T.); +#79514 = ORIENTED_EDGE('',*,*,#79515,.T.); +#79515 = EDGE_CURVE('',#79491,#79468,#79516,.T.); +#79516 = LINE('',#79517,#79518); +#79517 = CARTESIAN_POINT('',(2.264264705882,7.5E-02,-0.707058823529)); +#79518 = VECTOR('',#79519,1.); +#79519 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79520 = ORIENTED_EDGE('',*,*,#79475,.F.); +#79521 = PLANE('',#79522); +#79522 = AXIS2_PLACEMENT_3D('',#79523,#79524,#79525); +#79523 = CARTESIAN_POINT('',(2.465,-7.5E-02,-1.51)); +#79524 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79525 = DIRECTION('',(0.,1.,0.)); +#79526 = ADVANCED_FACE('',(#79527),#79535,.F.); +#79527 = FACE_BOUND('',#79528,.F.); +#79528 = EDGE_LOOP('',(#79529,#79530,#79531,#79532,#79533,#79534)); +#79529 = ORIENTED_EDGE('',*,*,#79498,.T.); +#79530 = ORIENTED_EDGE('',*,*,#79515,.T.); +#79531 = ORIENTED_EDGE('',*,*,#79467,.T.); +#79532 = ORIENTED_EDGE('',*,*,#79417,.F.); +#79533 = ORIENTED_EDGE('',*,*,#79386,.F.); +#79534 = ORIENTED_EDGE('',*,*,#79450,.F.); +#79535 = PLANE('',#79536); +#79536 = AXIS2_PLACEMENT_3D('',#79537,#79538,#79539); +#79537 = CARTESIAN_POINT('',(2.44,7.5E-02,0.19)); +#79538 = DIRECTION('',(0.,-1.,0.)); +#79539 = DIRECTION('',(1.,0.,0.)); +#79540 = MANIFOLD_SOLID_BREP('',#79541); +#79541 = CLOSED_SHELL('',(#79542,#79598,#79629,#79653,#79677,#79701, + #79725,#79742)); +#79542 = ADVANCED_FACE('',(#79543),#79593,.F.); +#79543 = FACE_BOUND('',#79544,.F.); +#79544 = EDGE_LOOP('',(#79545,#79555,#79563,#79571,#79579,#79587)); +#79545 = ORIENTED_EDGE('',*,*,#79546,.T.); +#79546 = EDGE_CURVE('',#79547,#79549,#79551,.T.); +#79547 = VERTEX_POINT('',#79548); +#79548 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79549 = VERTEX_POINT('',#79550); +#79550 = CARTESIAN_POINT('',(3.51,-1.425,-1.41)); +#79551 = LINE('',#79552,#79553); +#79552 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79553 = VECTOR('',#79554,1.); +#79554 = DIRECTION('',(0.,0.,-1.)); +#79555 = ORIENTED_EDGE('',*,*,#79556,.T.); +#79556 = EDGE_CURVE('',#79549,#79557,#79559,.T.); +#79557 = VERTEX_POINT('',#79558); +#79558 = CARTESIAN_POINT('',(3.46,-1.425,-1.61)); +#79559 = LINE('',#79560,#79561); +#79560 = CARTESIAN_POINT('',(3.685735294118,-1.425,-0.707058823529)); +#79561 = VECTOR('',#79562,1.); +#79562 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79563 = ORIENTED_EDGE('',*,*,#79564,.T.); +#79564 = EDGE_CURVE('',#79557,#79565,#79567,.T.); +#79565 = VERTEX_POINT('',#79566); +#79566 = CARTESIAN_POINT('',(3.34,-1.425,-1.61)); +#79567 = LINE('',#79568,#79569); +#79568 = CARTESIAN_POINT('',(3.51,-1.425,-1.61)); +#79569 = VECTOR('',#79570,1.); +#79570 = DIRECTION('',(-1.,0.,0.)); +#79571 = ORIENTED_EDGE('',*,*,#79572,.F.); +#79572 = EDGE_CURVE('',#79573,#79565,#79575,.T.); +#79573 = VERTEX_POINT('',#79574); +#79574 = CARTESIAN_POINT('',(3.29,-1.425,-1.41)); +#79575 = LINE('',#79576,#79577); +#79576 = CARTESIAN_POINT('',(3.120735294118,-1.425,-0.732941176471)); +#79577 = VECTOR('',#79578,1.); +#79578 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79579 = ORIENTED_EDGE('',*,*,#79580,.F.); +#79580 = EDGE_CURVE('',#79581,#79573,#79583,.T.); +#79581 = VERTEX_POINT('',#79582); +#79582 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79583 = LINE('',#79584,#79585); +#79584 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79585 = VECTOR('',#79586,1.); +#79586 = DIRECTION('',(0.,0.,-1.)); +#79587 = ORIENTED_EDGE('',*,*,#79588,.F.); +#79588 = EDGE_CURVE('',#79547,#79581,#79589,.T.); +#79589 = LINE('',#79590,#79591); +#79590 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79591 = VECTOR('',#79592,1.); +#79592 = DIRECTION('',(-1.,0.,0.)); +#79593 = PLANE('',#79594); +#79594 = AXIS2_PLACEMENT_3D('',#79595,#79596,#79597); +#79595 = CARTESIAN_POINT('',(3.51,-1.425,0.19)); +#79596 = DIRECTION('',(0.,1.,0.)); +#79597 = DIRECTION('',(-1.,0.,0.)); +#79598 = ADVANCED_FACE('',(#79599),#79624,.F.); +#79599 = FACE_BOUND('',#79600,.F.); +#79600 = EDGE_LOOP('',(#79601,#79611,#79617,#79618)); +#79601 = ORIENTED_EDGE('',*,*,#79602,.T.); +#79602 = EDGE_CURVE('',#79603,#79605,#79607,.T.); +#79603 = VERTEX_POINT('',#79604); +#79604 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79605 = VERTEX_POINT('',#79606); +#79606 = CARTESIAN_POINT('',(3.51,-1.275,-1.41)); +#79607 = LINE('',#79608,#79609); +#79608 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79609 = VECTOR('',#79610,1.); +#79610 = DIRECTION('',(0.,0.,-1.)); +#79611 = ORIENTED_EDGE('',*,*,#79612,.T.); +#79612 = EDGE_CURVE('',#79605,#79549,#79613,.T.); +#79613 = LINE('',#79614,#79615); +#79614 = CARTESIAN_POINT('',(3.51,-1.275,-1.41)); +#79615 = VECTOR('',#79616,1.); +#79616 = DIRECTION('',(0.,-1.,0.)); +#79617 = ORIENTED_EDGE('',*,*,#79546,.F.); +#79618 = ORIENTED_EDGE('',*,*,#79619,.F.); +#79619 = EDGE_CURVE('',#79603,#79547,#79620,.T.); +#79620 = LINE('',#79621,#79622); +#79621 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79622 = VECTOR('',#79623,1.); +#79623 = DIRECTION('',(0.,-1.,0.)); +#79624 = PLANE('',#79625); +#79625 = AXIS2_PLACEMENT_3D('',#79626,#79627,#79628); +#79626 = CARTESIAN_POINT('',(3.51,-1.275,0.19)); +#79627 = DIRECTION('',(-1.,-0.,-0.)); +#79628 = DIRECTION('',(0.,-1.,0.)); +#79629 = ADVANCED_FACE('',(#79630),#79648,.T.); +#79630 = FACE_BOUND('',#79631,.T.); +#79631 = EDGE_LOOP('',(#79632,#79640,#79641,#79642)); +#79632 = ORIENTED_EDGE('',*,*,#79633,.F.); +#79633 = EDGE_CURVE('',#79605,#79634,#79636,.T.); +#79634 = VERTEX_POINT('',#79635); +#79635 = CARTESIAN_POINT('',(3.46,-1.275,-1.61)); +#79636 = LINE('',#79637,#79638); +#79637 = CARTESIAN_POINT('',(3.679264705882,-1.275,-0.732941176471)); +#79638 = VECTOR('',#79639,1.); +#79639 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79640 = ORIENTED_EDGE('',*,*,#79612,.T.); +#79641 = ORIENTED_EDGE('',*,*,#79556,.T.); +#79642 = ORIENTED_EDGE('',*,*,#79643,.F.); +#79643 = EDGE_CURVE('',#79634,#79557,#79644,.T.); +#79644 = LINE('',#79645,#79646); +#79645 = CARTESIAN_POINT('',(3.46,-1.275,-1.61)); +#79646 = VECTOR('',#79647,1.); +#79647 = DIRECTION('',(0.,-1.,0.)); +#79648 = PLANE('',#79649); +#79649 = AXIS2_PLACEMENT_3D('',#79650,#79651,#79652); +#79650 = CARTESIAN_POINT('',(3.485,-1.275,-1.51)); +#79651 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79652 = DIRECTION('',(0.,-1.,0.)); +#79653 = ADVANCED_FACE('',(#79654),#79672,.T.); +#79654 = FACE_BOUND('',#79655,.F.); +#79655 = EDGE_LOOP('',(#79656,#79657,#79665,#79671)); +#79656 = ORIENTED_EDGE('',*,*,#79588,.T.); +#79657 = ORIENTED_EDGE('',*,*,#79658,.T.); +#79658 = EDGE_CURVE('',#79581,#79659,#79661,.T.); +#79659 = VERTEX_POINT('',#79660); +#79660 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79661 = LINE('',#79662,#79663); +#79662 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79663 = VECTOR('',#79664,1.); +#79664 = DIRECTION('',(0.,1.,0.)); +#79665 = ORIENTED_EDGE('',*,*,#79666,.T.); +#79666 = EDGE_CURVE('',#79659,#79603,#79667,.T.); +#79667 = LINE('',#79668,#79669); +#79668 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79669 = VECTOR('',#79670,1.); +#79670 = DIRECTION('',(1.,0.,0.)); +#79671 = ORIENTED_EDGE('',*,*,#79619,.T.); +#79672 = PLANE('',#79673); +#79673 = AXIS2_PLACEMENT_3D('',#79674,#79675,#79676); +#79674 = CARTESIAN_POINT('',(3.4,-1.35,0.19)); +#79675 = DIRECTION('',(0.,0.,1.)); +#79676 = DIRECTION('',(1.,0.,-0.)); +#79677 = ADVANCED_FACE('',(#79678),#79696,.F.); +#79678 = FACE_BOUND('',#79679,.F.); +#79679 = EDGE_LOOP('',(#79680,#79681,#79682,#79690)); +#79680 = ORIENTED_EDGE('',*,*,#79564,.F.); +#79681 = ORIENTED_EDGE('',*,*,#79643,.F.); +#79682 = ORIENTED_EDGE('',*,*,#79683,.F.); +#79683 = EDGE_CURVE('',#79684,#79634,#79686,.T.); +#79684 = VERTEX_POINT('',#79685); +#79685 = CARTESIAN_POINT('',(3.34,-1.275,-1.61)); +#79686 = LINE('',#79687,#79688); +#79687 = CARTESIAN_POINT('',(3.29,-1.275,-1.61)); +#79688 = VECTOR('',#79689,1.); +#79689 = DIRECTION('',(1.,0.,0.)); +#79690 = ORIENTED_EDGE('',*,*,#79691,.F.); +#79691 = EDGE_CURVE('',#79565,#79684,#79692,.T.); +#79692 = LINE('',#79693,#79694); +#79693 = CARTESIAN_POINT('',(3.34,-1.425,-1.61)); +#79694 = VECTOR('',#79695,1.); +#79695 = DIRECTION('',(0.,1.,0.)); +#79696 = PLANE('',#79697); +#79697 = AXIS2_PLACEMENT_3D('',#79698,#79699,#79700); +#79698 = CARTESIAN_POINT('',(3.4,-1.35,-1.61)); +#79699 = DIRECTION('',(0.,0.,1.)); +#79700 = DIRECTION('',(1.,0.,-0.)); +#79701 = ADVANCED_FACE('',(#79702),#79720,.F.); +#79702 = FACE_BOUND('',#79703,.F.); +#79703 = EDGE_LOOP('',(#79704,#79705,#79713,#79719)); +#79704 = ORIENTED_EDGE('',*,*,#79580,.T.); +#79705 = ORIENTED_EDGE('',*,*,#79706,.T.); +#79706 = EDGE_CURVE('',#79573,#79707,#79709,.T.); +#79707 = VERTEX_POINT('',#79708); +#79708 = CARTESIAN_POINT('',(3.29,-1.275,-1.41)); +#79709 = LINE('',#79710,#79711); +#79710 = CARTESIAN_POINT('',(3.29,-1.425,-1.41)); +#79711 = VECTOR('',#79712,1.); +#79712 = DIRECTION('',(0.,1.,0.)); +#79713 = ORIENTED_EDGE('',*,*,#79714,.F.); +#79714 = EDGE_CURVE('',#79659,#79707,#79715,.T.); +#79715 = LINE('',#79716,#79717); +#79716 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79717 = VECTOR('',#79718,1.); +#79718 = DIRECTION('',(0.,0.,-1.)); +#79719 = ORIENTED_EDGE('',*,*,#79658,.F.); +#79720 = PLANE('',#79721); +#79721 = AXIS2_PLACEMENT_3D('',#79722,#79723,#79724); +#79722 = CARTESIAN_POINT('',(3.29,-1.425,0.19)); +#79723 = DIRECTION('',(1.,0.,0.)); +#79724 = DIRECTION('',(-0.,1.,0.)); +#79725 = ADVANCED_FACE('',(#79726),#79737,.T.); +#79726 = FACE_BOUND('',#79727,.T.); +#79727 = EDGE_LOOP('',(#79728,#79729,#79730,#79736)); +#79728 = ORIENTED_EDGE('',*,*,#79572,.F.); +#79729 = ORIENTED_EDGE('',*,*,#79706,.T.); +#79730 = ORIENTED_EDGE('',*,*,#79731,.T.); +#79731 = EDGE_CURVE('',#79707,#79684,#79732,.T.); +#79732 = LINE('',#79733,#79734); +#79733 = CARTESIAN_POINT('',(3.114264705882,-1.275,-0.707058823529)); +#79734 = VECTOR('',#79735,1.); +#79735 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79736 = ORIENTED_EDGE('',*,*,#79691,.F.); +#79737 = PLANE('',#79738); +#79738 = AXIS2_PLACEMENT_3D('',#79739,#79740,#79741); +#79739 = CARTESIAN_POINT('',(3.315,-1.425,-1.51)); +#79740 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79741 = DIRECTION('',(0.,1.,0.)); +#79742 = ADVANCED_FACE('',(#79743),#79751,.F.); +#79743 = FACE_BOUND('',#79744,.F.); +#79744 = EDGE_LOOP('',(#79745,#79746,#79747,#79748,#79749,#79750)); +#79745 = ORIENTED_EDGE('',*,*,#79714,.T.); +#79746 = ORIENTED_EDGE('',*,*,#79731,.T.); +#79747 = ORIENTED_EDGE('',*,*,#79683,.T.); +#79748 = ORIENTED_EDGE('',*,*,#79633,.F.); +#79749 = ORIENTED_EDGE('',*,*,#79602,.F.); +#79750 = ORIENTED_EDGE('',*,*,#79666,.F.); +#79751 = PLANE('',#79752); +#79752 = AXIS2_PLACEMENT_3D('',#79753,#79754,#79755); +#79753 = CARTESIAN_POINT('',(3.29,-1.275,0.19)); +#79754 = DIRECTION('',(0.,-1.,0.)); +#79755 = DIRECTION('',(1.,0.,0.)); +#79756 = MANIFOLD_SOLID_BREP('',#79757); +#79757 = CLOSED_SHELL('',(#79758,#79814,#79845,#79869,#79893,#79917, + #79941,#79958)); +#79758 = ADVANCED_FACE('',(#79759),#79809,.F.); +#79759 = FACE_BOUND('',#79760,.F.); +#79760 = EDGE_LOOP('',(#79761,#79771,#79779,#79787,#79795,#79803)); +#79761 = ORIENTED_EDGE('',*,*,#79762,.T.); +#79762 = EDGE_CURVE('',#79763,#79765,#79767,.T.); +#79763 = VERTEX_POINT('',#79764); +#79764 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79765 = VERTEX_POINT('',#79766); +#79766 = CARTESIAN_POINT('',(3.51,-7.5E-02,-1.41)); +#79767 = LINE('',#79768,#79769); +#79768 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79769 = VECTOR('',#79770,1.); +#79770 = DIRECTION('',(0.,0.,-1.)); +#79771 = ORIENTED_EDGE('',*,*,#79772,.T.); +#79772 = EDGE_CURVE('',#79765,#79773,#79775,.T.); +#79773 = VERTEX_POINT('',#79774); +#79774 = CARTESIAN_POINT('',(3.46,-7.5E-02,-1.61)); +#79775 = LINE('',#79776,#79777); +#79776 = CARTESIAN_POINT('',(3.685735294118,-7.5E-02,-0.707058823529)); +#79777 = VECTOR('',#79778,1.); +#79778 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79779 = ORIENTED_EDGE('',*,*,#79780,.T.); +#79780 = EDGE_CURVE('',#79773,#79781,#79783,.T.); +#79781 = VERTEX_POINT('',#79782); +#79782 = CARTESIAN_POINT('',(3.34,-7.5E-02,-1.61)); +#79783 = LINE('',#79784,#79785); +#79784 = CARTESIAN_POINT('',(3.51,-7.5E-02,-1.61)); +#79785 = VECTOR('',#79786,1.); +#79786 = DIRECTION('',(-1.,0.,0.)); +#79787 = ORIENTED_EDGE('',*,*,#79788,.F.); +#79788 = EDGE_CURVE('',#79789,#79781,#79791,.T.); +#79789 = VERTEX_POINT('',#79790); +#79790 = CARTESIAN_POINT('',(3.29,-7.5E-02,-1.41)); +#79791 = LINE('',#79792,#79793); +#79792 = CARTESIAN_POINT('',(3.120735294118,-7.5E-02,-0.732941176471)); +#79793 = VECTOR('',#79794,1.); +#79794 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79795 = ORIENTED_EDGE('',*,*,#79796,.F.); +#79796 = EDGE_CURVE('',#79797,#79789,#79799,.T.); +#79797 = VERTEX_POINT('',#79798); +#79798 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79799 = LINE('',#79800,#79801); +#79800 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79801 = VECTOR('',#79802,1.); +#79802 = DIRECTION('',(0.,0.,-1.)); +#79803 = ORIENTED_EDGE('',*,*,#79804,.F.); +#79804 = EDGE_CURVE('',#79763,#79797,#79805,.T.); +#79805 = LINE('',#79806,#79807); +#79806 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79807 = VECTOR('',#79808,1.); +#79808 = DIRECTION('',(-1.,0.,0.)); +#79809 = PLANE('',#79810); +#79810 = AXIS2_PLACEMENT_3D('',#79811,#79812,#79813); +#79811 = CARTESIAN_POINT('',(3.51,-7.5E-02,0.19)); +#79812 = DIRECTION('',(0.,1.,0.)); +#79813 = DIRECTION('',(-1.,0.,0.)); +#79814 = ADVANCED_FACE('',(#79815),#79840,.F.); +#79815 = FACE_BOUND('',#79816,.F.); +#79816 = EDGE_LOOP('',(#79817,#79827,#79833,#79834)); +#79817 = ORIENTED_EDGE('',*,*,#79818,.T.); +#79818 = EDGE_CURVE('',#79819,#79821,#79823,.T.); +#79819 = VERTEX_POINT('',#79820); +#79820 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79821 = VERTEX_POINT('',#79822); +#79822 = CARTESIAN_POINT('',(3.51,7.5E-02,-1.41)); +#79823 = LINE('',#79824,#79825); +#79824 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79825 = VECTOR('',#79826,1.); +#79826 = DIRECTION('',(0.,0.,-1.)); +#79827 = ORIENTED_EDGE('',*,*,#79828,.T.); +#79828 = EDGE_CURVE('',#79821,#79765,#79829,.T.); +#79829 = LINE('',#79830,#79831); +#79830 = CARTESIAN_POINT('',(3.51,7.5E-02,-1.41)); +#79831 = VECTOR('',#79832,1.); +#79832 = DIRECTION('',(0.,-1.,0.)); +#79833 = ORIENTED_EDGE('',*,*,#79762,.F.); +#79834 = ORIENTED_EDGE('',*,*,#79835,.F.); +#79835 = EDGE_CURVE('',#79819,#79763,#79836,.T.); +#79836 = LINE('',#79837,#79838); +#79837 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79838 = VECTOR('',#79839,1.); +#79839 = DIRECTION('',(0.,-1.,0.)); +#79840 = PLANE('',#79841); +#79841 = AXIS2_PLACEMENT_3D('',#79842,#79843,#79844); +#79842 = CARTESIAN_POINT('',(3.51,7.5E-02,0.19)); +#79843 = DIRECTION('',(-1.,-0.,-0.)); +#79844 = DIRECTION('',(0.,-1.,0.)); +#79845 = ADVANCED_FACE('',(#79846),#79864,.T.); +#79846 = FACE_BOUND('',#79847,.T.); +#79847 = EDGE_LOOP('',(#79848,#79856,#79857,#79858)); +#79848 = ORIENTED_EDGE('',*,*,#79849,.F.); +#79849 = EDGE_CURVE('',#79821,#79850,#79852,.T.); +#79850 = VERTEX_POINT('',#79851); +#79851 = CARTESIAN_POINT('',(3.46,7.5E-02,-1.61)); +#79852 = LINE('',#79853,#79854); +#79853 = CARTESIAN_POINT('',(3.679264705882,7.5E-02,-0.732941176471)); +#79854 = VECTOR('',#79855,1.); +#79855 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#79856 = ORIENTED_EDGE('',*,*,#79828,.T.); +#79857 = ORIENTED_EDGE('',*,*,#79772,.T.); +#79858 = ORIENTED_EDGE('',*,*,#79859,.F.); +#79859 = EDGE_CURVE('',#79850,#79773,#79860,.T.); +#79860 = LINE('',#79861,#79862); +#79861 = CARTESIAN_POINT('',(3.46,7.5E-02,-1.61)); +#79862 = VECTOR('',#79863,1.); +#79863 = DIRECTION('',(0.,-1.,0.)); +#79864 = PLANE('',#79865); +#79865 = AXIS2_PLACEMENT_3D('',#79866,#79867,#79868); +#79866 = CARTESIAN_POINT('',(3.485,7.5E-02,-1.51)); +#79867 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#79868 = DIRECTION('',(0.,-1.,0.)); +#79869 = ADVANCED_FACE('',(#79870),#79888,.T.); +#79870 = FACE_BOUND('',#79871,.F.); +#79871 = EDGE_LOOP('',(#79872,#79873,#79881,#79887)); +#79872 = ORIENTED_EDGE('',*,*,#79804,.T.); +#79873 = ORIENTED_EDGE('',*,*,#79874,.T.); +#79874 = EDGE_CURVE('',#79797,#79875,#79877,.T.); +#79875 = VERTEX_POINT('',#79876); +#79876 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79877 = LINE('',#79878,#79879); +#79878 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79879 = VECTOR('',#79880,1.); +#79880 = DIRECTION('',(0.,1.,0.)); +#79881 = ORIENTED_EDGE('',*,*,#79882,.T.); +#79882 = EDGE_CURVE('',#79875,#79819,#79883,.T.); +#79883 = LINE('',#79884,#79885); +#79884 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79885 = VECTOR('',#79886,1.); +#79886 = DIRECTION('',(1.,0.,0.)); +#79887 = ORIENTED_EDGE('',*,*,#79835,.T.); +#79888 = PLANE('',#79889); +#79889 = AXIS2_PLACEMENT_3D('',#79890,#79891,#79892); +#79890 = CARTESIAN_POINT('',(3.4,0.,0.19)); +#79891 = DIRECTION('',(0.,0.,1.)); +#79892 = DIRECTION('',(1.,0.,-0.)); +#79893 = ADVANCED_FACE('',(#79894),#79912,.F.); +#79894 = FACE_BOUND('',#79895,.F.); +#79895 = EDGE_LOOP('',(#79896,#79897,#79898,#79906)); +#79896 = ORIENTED_EDGE('',*,*,#79780,.F.); +#79897 = ORIENTED_EDGE('',*,*,#79859,.F.); +#79898 = ORIENTED_EDGE('',*,*,#79899,.F.); +#79899 = EDGE_CURVE('',#79900,#79850,#79902,.T.); +#79900 = VERTEX_POINT('',#79901); +#79901 = CARTESIAN_POINT('',(3.34,7.5E-02,-1.61)); +#79902 = LINE('',#79903,#79904); +#79903 = CARTESIAN_POINT('',(3.29,7.5E-02,-1.61)); +#79904 = VECTOR('',#79905,1.); +#79905 = DIRECTION('',(1.,0.,0.)); +#79906 = ORIENTED_EDGE('',*,*,#79907,.F.); +#79907 = EDGE_CURVE('',#79781,#79900,#79908,.T.); +#79908 = LINE('',#79909,#79910); +#79909 = CARTESIAN_POINT('',(3.34,-7.5E-02,-1.61)); +#79910 = VECTOR('',#79911,1.); +#79911 = DIRECTION('',(0.,1.,0.)); +#79912 = PLANE('',#79913); +#79913 = AXIS2_PLACEMENT_3D('',#79914,#79915,#79916); +#79914 = CARTESIAN_POINT('',(3.4,0.,-1.61)); +#79915 = DIRECTION('',(0.,0.,1.)); +#79916 = DIRECTION('',(1.,0.,-0.)); +#79917 = ADVANCED_FACE('',(#79918),#79936,.F.); +#79918 = FACE_BOUND('',#79919,.F.); +#79919 = EDGE_LOOP('',(#79920,#79921,#79929,#79935)); +#79920 = ORIENTED_EDGE('',*,*,#79796,.T.); +#79921 = ORIENTED_EDGE('',*,*,#79922,.T.); +#79922 = EDGE_CURVE('',#79789,#79923,#79925,.T.); +#79923 = VERTEX_POINT('',#79924); +#79924 = CARTESIAN_POINT('',(3.29,7.5E-02,-1.41)); +#79925 = LINE('',#79926,#79927); +#79926 = CARTESIAN_POINT('',(3.29,-7.5E-02,-1.41)); +#79927 = VECTOR('',#79928,1.); +#79928 = DIRECTION('',(0.,1.,0.)); +#79929 = ORIENTED_EDGE('',*,*,#79930,.F.); +#79930 = EDGE_CURVE('',#79875,#79923,#79931,.T.); +#79931 = LINE('',#79932,#79933); +#79932 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79933 = VECTOR('',#79934,1.); +#79934 = DIRECTION('',(0.,0.,-1.)); +#79935 = ORIENTED_EDGE('',*,*,#79874,.F.); +#79936 = PLANE('',#79937); +#79937 = AXIS2_PLACEMENT_3D('',#79938,#79939,#79940); +#79938 = CARTESIAN_POINT('',(3.29,-7.5E-02,0.19)); +#79939 = DIRECTION('',(1.,0.,0.)); +#79940 = DIRECTION('',(-0.,1.,0.)); +#79941 = ADVANCED_FACE('',(#79942),#79953,.T.); +#79942 = FACE_BOUND('',#79943,.T.); +#79943 = EDGE_LOOP('',(#79944,#79945,#79946,#79952)); +#79944 = ORIENTED_EDGE('',*,*,#79788,.F.); +#79945 = ORIENTED_EDGE('',*,*,#79922,.T.); +#79946 = ORIENTED_EDGE('',*,*,#79947,.T.); +#79947 = EDGE_CURVE('',#79923,#79900,#79948,.T.); +#79948 = LINE('',#79949,#79950); +#79949 = CARTESIAN_POINT('',(3.114264705882,7.5E-02,-0.707058823529)); +#79950 = VECTOR('',#79951,1.); +#79951 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#79952 = ORIENTED_EDGE('',*,*,#79907,.F.); +#79953 = PLANE('',#79954); +#79954 = AXIS2_PLACEMENT_3D('',#79955,#79956,#79957); +#79955 = CARTESIAN_POINT('',(3.315,-7.5E-02,-1.51)); +#79956 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#79957 = DIRECTION('',(0.,1.,0.)); +#79958 = ADVANCED_FACE('',(#79959),#79967,.F.); +#79959 = FACE_BOUND('',#79960,.F.); +#79960 = EDGE_LOOP('',(#79961,#79962,#79963,#79964,#79965,#79966)); +#79961 = ORIENTED_EDGE('',*,*,#79930,.T.); +#79962 = ORIENTED_EDGE('',*,*,#79947,.T.); +#79963 = ORIENTED_EDGE('',*,*,#79899,.T.); +#79964 = ORIENTED_EDGE('',*,*,#79849,.F.); +#79965 = ORIENTED_EDGE('',*,*,#79818,.F.); +#79966 = ORIENTED_EDGE('',*,*,#79882,.F.); +#79967 = PLANE('',#79968); +#79968 = AXIS2_PLACEMENT_3D('',#79969,#79970,#79971); +#79969 = CARTESIAN_POINT('',(3.29,7.5E-02,0.19)); +#79970 = DIRECTION('',(0.,-1.,0.)); +#79971 = DIRECTION('',(1.,0.,0.)); +#79972 = MANIFOLD_SOLID_BREP('',#79973); +#79973 = CLOSED_SHELL('',(#79974,#80030,#80061,#80085,#80109,#80133, + #80157,#80174)); +#79974 = ADVANCED_FACE('',(#79975),#80025,.F.); +#79975 = FACE_BOUND('',#79976,.F.); +#79976 = EDGE_LOOP('',(#79977,#79987,#79995,#80003,#80011,#80019)); +#79977 = ORIENTED_EDGE('',*,*,#79978,.T.); +#79978 = EDGE_CURVE('',#79979,#79981,#79983,.T.); +#79979 = VERTEX_POINT('',#79980); +#79980 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#79981 = VERTEX_POINT('',#79982); +#79982 = CARTESIAN_POINT('',(4.36,-1.425,-1.41)); +#79983 = LINE('',#79984,#79985); +#79984 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#79985 = VECTOR('',#79986,1.); +#79986 = DIRECTION('',(0.,0.,-1.)); +#79987 = ORIENTED_EDGE('',*,*,#79988,.T.); +#79988 = EDGE_CURVE('',#79981,#79989,#79991,.T.); +#79989 = VERTEX_POINT('',#79990); +#79990 = CARTESIAN_POINT('',(4.31,-1.425,-1.61)); +#79991 = LINE('',#79992,#79993); +#79992 = CARTESIAN_POINT('',(4.535735294118,-1.425,-0.707058823529)); +#79993 = VECTOR('',#79994,1.); +#79994 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#79995 = ORIENTED_EDGE('',*,*,#79996,.T.); +#79996 = EDGE_CURVE('',#79989,#79997,#79999,.T.); +#79997 = VERTEX_POINT('',#79998); +#79998 = CARTESIAN_POINT('',(4.19,-1.425,-1.61)); +#79999 = LINE('',#80000,#80001); +#80000 = CARTESIAN_POINT('',(4.36,-1.425,-1.61)); +#80001 = VECTOR('',#80002,1.); +#80002 = DIRECTION('',(-1.,0.,0.)); +#80003 = ORIENTED_EDGE('',*,*,#80004,.F.); +#80004 = EDGE_CURVE('',#80005,#79997,#80007,.T.); +#80005 = VERTEX_POINT('',#80006); +#80006 = CARTESIAN_POINT('',(4.14,-1.425,-1.41)); +#80007 = LINE('',#80008,#80009); +#80008 = CARTESIAN_POINT('',(3.970735294118,-1.425,-0.732941176471)); +#80009 = VECTOR('',#80010,1.); +#80010 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80011 = ORIENTED_EDGE('',*,*,#80012,.F.); +#80012 = EDGE_CURVE('',#80013,#80005,#80015,.T.); +#80013 = VERTEX_POINT('',#80014); +#80014 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80015 = LINE('',#80016,#80017); +#80016 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80017 = VECTOR('',#80018,1.); +#80018 = DIRECTION('',(0.,0.,-1.)); +#80019 = ORIENTED_EDGE('',*,*,#80020,.F.); +#80020 = EDGE_CURVE('',#79979,#80013,#80021,.T.); +#80021 = LINE('',#80022,#80023); +#80022 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#80023 = VECTOR('',#80024,1.); +#80024 = DIRECTION('',(-1.,0.,0.)); +#80025 = PLANE('',#80026); +#80026 = AXIS2_PLACEMENT_3D('',#80027,#80028,#80029); +#80027 = CARTESIAN_POINT('',(4.36,-1.425,0.19)); +#80028 = DIRECTION('',(0.,1.,0.)); +#80029 = DIRECTION('',(-1.,0.,0.)); +#80030 = ADVANCED_FACE('',(#80031),#80056,.F.); +#80031 = FACE_BOUND('',#80032,.F.); +#80032 = EDGE_LOOP('',(#80033,#80043,#80049,#80050)); +#80033 = ORIENTED_EDGE('',*,*,#80034,.T.); +#80034 = EDGE_CURVE('',#80035,#80037,#80039,.T.); +#80035 = VERTEX_POINT('',#80036); +#80036 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80037 = VERTEX_POINT('',#80038); +#80038 = CARTESIAN_POINT('',(4.36,-1.275,-1.41)); +#80039 = LINE('',#80040,#80041); +#80040 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80041 = VECTOR('',#80042,1.); +#80042 = DIRECTION('',(0.,0.,-1.)); +#80043 = ORIENTED_EDGE('',*,*,#80044,.T.); +#80044 = EDGE_CURVE('',#80037,#79981,#80045,.T.); +#80045 = LINE('',#80046,#80047); +#80046 = CARTESIAN_POINT('',(4.36,-1.275,-1.41)); +#80047 = VECTOR('',#80048,1.); +#80048 = DIRECTION('',(0.,-1.,0.)); +#80049 = ORIENTED_EDGE('',*,*,#79978,.F.); +#80050 = ORIENTED_EDGE('',*,*,#80051,.F.); +#80051 = EDGE_CURVE('',#80035,#79979,#80052,.T.); +#80052 = LINE('',#80053,#80054); +#80053 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80054 = VECTOR('',#80055,1.); +#80055 = DIRECTION('',(0.,-1.,0.)); +#80056 = PLANE('',#80057); +#80057 = AXIS2_PLACEMENT_3D('',#80058,#80059,#80060); +#80058 = CARTESIAN_POINT('',(4.36,-1.275,0.19)); +#80059 = DIRECTION('',(-1.,-0.,-0.)); +#80060 = DIRECTION('',(0.,-1.,0.)); +#80061 = ADVANCED_FACE('',(#80062),#80080,.T.); +#80062 = FACE_BOUND('',#80063,.T.); +#80063 = EDGE_LOOP('',(#80064,#80072,#80073,#80074)); +#80064 = ORIENTED_EDGE('',*,*,#80065,.F.); +#80065 = EDGE_CURVE('',#80037,#80066,#80068,.T.); +#80066 = VERTEX_POINT('',#80067); +#80067 = CARTESIAN_POINT('',(4.31,-1.275,-1.61)); +#80068 = LINE('',#80069,#80070); +#80069 = CARTESIAN_POINT('',(4.529264705882,-1.275,-0.732941176471)); +#80070 = VECTOR('',#80071,1.); +#80071 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80072 = ORIENTED_EDGE('',*,*,#80044,.T.); +#80073 = ORIENTED_EDGE('',*,*,#79988,.T.); +#80074 = ORIENTED_EDGE('',*,*,#80075,.F.); +#80075 = EDGE_CURVE('',#80066,#79989,#80076,.T.); +#80076 = LINE('',#80077,#80078); +#80077 = CARTESIAN_POINT('',(4.31,-1.275,-1.61)); +#80078 = VECTOR('',#80079,1.); +#80079 = DIRECTION('',(0.,-1.,0.)); +#80080 = PLANE('',#80081); +#80081 = AXIS2_PLACEMENT_3D('',#80082,#80083,#80084); +#80082 = CARTESIAN_POINT('',(4.335,-1.275,-1.51)); +#80083 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80084 = DIRECTION('',(0.,-1.,0.)); +#80085 = ADVANCED_FACE('',(#80086),#80104,.T.); +#80086 = FACE_BOUND('',#80087,.F.); +#80087 = EDGE_LOOP('',(#80088,#80089,#80097,#80103)); +#80088 = ORIENTED_EDGE('',*,*,#80020,.T.); +#80089 = ORIENTED_EDGE('',*,*,#80090,.T.); +#80090 = EDGE_CURVE('',#80013,#80091,#80093,.T.); +#80091 = VERTEX_POINT('',#80092); +#80092 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80093 = LINE('',#80094,#80095); +#80094 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80095 = VECTOR('',#80096,1.); +#80096 = DIRECTION('',(0.,1.,0.)); +#80097 = ORIENTED_EDGE('',*,*,#80098,.T.); +#80098 = EDGE_CURVE('',#80091,#80035,#80099,.T.); +#80099 = LINE('',#80100,#80101); +#80100 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80101 = VECTOR('',#80102,1.); +#80102 = DIRECTION('',(1.,0.,0.)); +#80103 = ORIENTED_EDGE('',*,*,#80051,.T.); +#80104 = PLANE('',#80105); +#80105 = AXIS2_PLACEMENT_3D('',#80106,#80107,#80108); +#80106 = CARTESIAN_POINT('',(4.25,-1.35,0.19)); +#80107 = DIRECTION('',(0.,0.,1.)); +#80108 = DIRECTION('',(1.,0.,-0.)); +#80109 = ADVANCED_FACE('',(#80110),#80128,.F.); +#80110 = FACE_BOUND('',#80111,.F.); +#80111 = EDGE_LOOP('',(#80112,#80113,#80114,#80122)); +#80112 = ORIENTED_EDGE('',*,*,#79996,.F.); +#80113 = ORIENTED_EDGE('',*,*,#80075,.F.); +#80114 = ORIENTED_EDGE('',*,*,#80115,.F.); +#80115 = EDGE_CURVE('',#80116,#80066,#80118,.T.); +#80116 = VERTEX_POINT('',#80117); +#80117 = CARTESIAN_POINT('',(4.19,-1.275,-1.61)); +#80118 = LINE('',#80119,#80120); +#80119 = CARTESIAN_POINT('',(4.14,-1.275,-1.61)); +#80120 = VECTOR('',#80121,1.); +#80121 = DIRECTION('',(1.,0.,0.)); +#80122 = ORIENTED_EDGE('',*,*,#80123,.F.); +#80123 = EDGE_CURVE('',#79997,#80116,#80124,.T.); +#80124 = LINE('',#80125,#80126); +#80125 = CARTESIAN_POINT('',(4.19,-1.425,-1.61)); +#80126 = VECTOR('',#80127,1.); +#80127 = DIRECTION('',(0.,1.,0.)); +#80128 = PLANE('',#80129); +#80129 = AXIS2_PLACEMENT_3D('',#80130,#80131,#80132); +#80130 = CARTESIAN_POINT('',(4.25,-1.35,-1.61)); +#80131 = DIRECTION('',(0.,0.,1.)); +#80132 = DIRECTION('',(1.,0.,-0.)); +#80133 = ADVANCED_FACE('',(#80134),#80152,.F.); +#80134 = FACE_BOUND('',#80135,.F.); +#80135 = EDGE_LOOP('',(#80136,#80137,#80145,#80151)); +#80136 = ORIENTED_EDGE('',*,*,#80012,.T.); +#80137 = ORIENTED_EDGE('',*,*,#80138,.T.); +#80138 = EDGE_CURVE('',#80005,#80139,#80141,.T.); +#80139 = VERTEX_POINT('',#80140); +#80140 = CARTESIAN_POINT('',(4.14,-1.275,-1.41)); +#80141 = LINE('',#80142,#80143); +#80142 = CARTESIAN_POINT('',(4.14,-1.425,-1.41)); +#80143 = VECTOR('',#80144,1.); +#80144 = DIRECTION('',(0.,1.,0.)); +#80145 = ORIENTED_EDGE('',*,*,#80146,.F.); +#80146 = EDGE_CURVE('',#80091,#80139,#80147,.T.); +#80147 = LINE('',#80148,#80149); +#80148 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80149 = VECTOR('',#80150,1.); +#80150 = DIRECTION('',(0.,0.,-1.)); +#80151 = ORIENTED_EDGE('',*,*,#80090,.F.); +#80152 = PLANE('',#80153); +#80153 = AXIS2_PLACEMENT_3D('',#80154,#80155,#80156); +#80154 = CARTESIAN_POINT('',(4.14,-1.425,0.19)); +#80155 = DIRECTION('',(1.,0.,0.)); +#80156 = DIRECTION('',(-0.,1.,0.)); +#80157 = ADVANCED_FACE('',(#80158),#80169,.T.); +#80158 = FACE_BOUND('',#80159,.T.); +#80159 = EDGE_LOOP('',(#80160,#80161,#80162,#80168)); +#80160 = ORIENTED_EDGE('',*,*,#80004,.F.); +#80161 = ORIENTED_EDGE('',*,*,#80138,.T.); +#80162 = ORIENTED_EDGE('',*,*,#80163,.T.); +#80163 = EDGE_CURVE('',#80139,#80116,#80164,.T.); +#80164 = LINE('',#80165,#80166); +#80165 = CARTESIAN_POINT('',(3.964264705882,-1.275,-0.707058823529)); +#80166 = VECTOR('',#80167,1.); +#80167 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80168 = ORIENTED_EDGE('',*,*,#80123,.F.); +#80169 = PLANE('',#80170); +#80170 = AXIS2_PLACEMENT_3D('',#80171,#80172,#80173); +#80171 = CARTESIAN_POINT('',(4.165,-1.425,-1.51)); +#80172 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80173 = DIRECTION('',(0.,1.,0.)); +#80174 = ADVANCED_FACE('',(#80175),#80183,.F.); +#80175 = FACE_BOUND('',#80176,.F.); +#80176 = EDGE_LOOP('',(#80177,#80178,#80179,#80180,#80181,#80182)); +#80177 = ORIENTED_EDGE('',*,*,#80146,.T.); +#80178 = ORIENTED_EDGE('',*,*,#80163,.T.); +#80179 = ORIENTED_EDGE('',*,*,#80115,.T.); +#80180 = ORIENTED_EDGE('',*,*,#80065,.F.); +#80181 = ORIENTED_EDGE('',*,*,#80034,.F.); +#80182 = ORIENTED_EDGE('',*,*,#80098,.F.); +#80183 = PLANE('',#80184); +#80184 = AXIS2_PLACEMENT_3D('',#80185,#80186,#80187); +#80185 = CARTESIAN_POINT('',(4.14,-1.275,0.19)); +#80186 = DIRECTION('',(0.,-1.,0.)); +#80187 = DIRECTION('',(1.,0.,0.)); +#80188 = MANIFOLD_SOLID_BREP('',#80189); +#80189 = CLOSED_SHELL('',(#80190,#80246,#80277,#80301,#80325,#80349, + #80373,#80390)); +#80190 = ADVANCED_FACE('',(#80191),#80241,.F.); +#80191 = FACE_BOUND('',#80192,.F.); +#80192 = EDGE_LOOP('',(#80193,#80203,#80211,#80219,#80227,#80235)); +#80193 = ORIENTED_EDGE('',*,*,#80194,.T.); +#80194 = EDGE_CURVE('',#80195,#80197,#80199,.T.); +#80195 = VERTEX_POINT('',#80196); +#80196 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80197 = VERTEX_POINT('',#80198); +#80198 = CARTESIAN_POINT('',(4.36,-7.5E-02,-1.41)); +#80199 = LINE('',#80200,#80201); +#80200 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80201 = VECTOR('',#80202,1.); +#80202 = DIRECTION('',(0.,0.,-1.)); +#80203 = ORIENTED_EDGE('',*,*,#80204,.T.); +#80204 = EDGE_CURVE('',#80197,#80205,#80207,.T.); +#80205 = VERTEX_POINT('',#80206); +#80206 = CARTESIAN_POINT('',(4.31,-7.5E-02,-1.61)); +#80207 = LINE('',#80208,#80209); +#80208 = CARTESIAN_POINT('',(4.535735294118,-7.5E-02,-0.707058823529)); +#80209 = VECTOR('',#80210,1.); +#80210 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80211 = ORIENTED_EDGE('',*,*,#80212,.T.); +#80212 = EDGE_CURVE('',#80205,#80213,#80215,.T.); +#80213 = VERTEX_POINT('',#80214); +#80214 = CARTESIAN_POINT('',(4.19,-7.5E-02,-1.61)); +#80215 = LINE('',#80216,#80217); +#80216 = CARTESIAN_POINT('',(4.36,-7.5E-02,-1.61)); +#80217 = VECTOR('',#80218,1.); +#80218 = DIRECTION('',(-1.,0.,0.)); +#80219 = ORIENTED_EDGE('',*,*,#80220,.F.); +#80220 = EDGE_CURVE('',#80221,#80213,#80223,.T.); +#80221 = VERTEX_POINT('',#80222); +#80222 = CARTESIAN_POINT('',(4.14,-7.5E-02,-1.41)); +#80223 = LINE('',#80224,#80225); +#80224 = CARTESIAN_POINT('',(3.970735294118,-7.5E-02,-0.732941176471)); +#80225 = VECTOR('',#80226,1.); +#80226 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80227 = ORIENTED_EDGE('',*,*,#80228,.F.); +#80228 = EDGE_CURVE('',#80229,#80221,#80231,.T.); +#80229 = VERTEX_POINT('',#80230); +#80230 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80231 = LINE('',#80232,#80233); +#80232 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80233 = VECTOR('',#80234,1.); +#80234 = DIRECTION('',(0.,0.,-1.)); +#80235 = ORIENTED_EDGE('',*,*,#80236,.F.); +#80236 = EDGE_CURVE('',#80195,#80229,#80237,.T.); +#80237 = LINE('',#80238,#80239); +#80238 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80239 = VECTOR('',#80240,1.); +#80240 = DIRECTION('',(-1.,0.,0.)); +#80241 = PLANE('',#80242); +#80242 = AXIS2_PLACEMENT_3D('',#80243,#80244,#80245); +#80243 = CARTESIAN_POINT('',(4.36,-7.5E-02,0.19)); +#80244 = DIRECTION('',(0.,1.,0.)); +#80245 = DIRECTION('',(-1.,0.,0.)); +#80246 = ADVANCED_FACE('',(#80247),#80272,.F.); +#80247 = FACE_BOUND('',#80248,.F.); +#80248 = EDGE_LOOP('',(#80249,#80259,#80265,#80266)); +#80249 = ORIENTED_EDGE('',*,*,#80250,.T.); +#80250 = EDGE_CURVE('',#80251,#80253,#80255,.T.); +#80251 = VERTEX_POINT('',#80252); +#80252 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80253 = VERTEX_POINT('',#80254); +#80254 = CARTESIAN_POINT('',(4.36,7.5E-02,-1.41)); +#80255 = LINE('',#80256,#80257); +#80256 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80257 = VECTOR('',#80258,1.); +#80258 = DIRECTION('',(0.,0.,-1.)); +#80259 = ORIENTED_EDGE('',*,*,#80260,.T.); +#80260 = EDGE_CURVE('',#80253,#80197,#80261,.T.); +#80261 = LINE('',#80262,#80263); +#80262 = CARTESIAN_POINT('',(4.36,7.5E-02,-1.41)); +#80263 = VECTOR('',#80264,1.); +#80264 = DIRECTION('',(0.,-1.,0.)); +#80265 = ORIENTED_EDGE('',*,*,#80194,.F.); +#80266 = ORIENTED_EDGE('',*,*,#80267,.F.); +#80267 = EDGE_CURVE('',#80251,#80195,#80268,.T.); +#80268 = LINE('',#80269,#80270); +#80269 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80270 = VECTOR('',#80271,1.); +#80271 = DIRECTION('',(0.,-1.,0.)); +#80272 = PLANE('',#80273); +#80273 = AXIS2_PLACEMENT_3D('',#80274,#80275,#80276); +#80274 = CARTESIAN_POINT('',(4.36,7.5E-02,0.19)); +#80275 = DIRECTION('',(-1.,-0.,-0.)); +#80276 = DIRECTION('',(0.,-1.,0.)); +#80277 = ADVANCED_FACE('',(#80278),#80296,.T.); +#80278 = FACE_BOUND('',#80279,.T.); +#80279 = EDGE_LOOP('',(#80280,#80288,#80289,#80290)); +#80280 = ORIENTED_EDGE('',*,*,#80281,.F.); +#80281 = EDGE_CURVE('',#80253,#80282,#80284,.T.); +#80282 = VERTEX_POINT('',#80283); +#80283 = CARTESIAN_POINT('',(4.31,7.5E-02,-1.61)); +#80284 = LINE('',#80285,#80286); +#80285 = CARTESIAN_POINT('',(4.529264705882,7.5E-02,-0.732941176471)); +#80286 = VECTOR('',#80287,1.); +#80287 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80288 = ORIENTED_EDGE('',*,*,#80260,.T.); +#80289 = ORIENTED_EDGE('',*,*,#80204,.T.); +#80290 = ORIENTED_EDGE('',*,*,#80291,.F.); +#80291 = EDGE_CURVE('',#80282,#80205,#80292,.T.); +#80292 = LINE('',#80293,#80294); +#80293 = CARTESIAN_POINT('',(4.31,7.5E-02,-1.61)); +#80294 = VECTOR('',#80295,1.); +#80295 = DIRECTION('',(0.,-1.,0.)); +#80296 = PLANE('',#80297); +#80297 = AXIS2_PLACEMENT_3D('',#80298,#80299,#80300); +#80298 = CARTESIAN_POINT('',(4.335,7.5E-02,-1.51)); +#80299 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80300 = DIRECTION('',(0.,-1.,0.)); +#80301 = ADVANCED_FACE('',(#80302),#80320,.T.); +#80302 = FACE_BOUND('',#80303,.F.); +#80303 = EDGE_LOOP('',(#80304,#80305,#80313,#80319)); +#80304 = ORIENTED_EDGE('',*,*,#80236,.T.); +#80305 = ORIENTED_EDGE('',*,*,#80306,.T.); +#80306 = EDGE_CURVE('',#80229,#80307,#80309,.T.); +#80307 = VERTEX_POINT('',#80308); +#80308 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80309 = LINE('',#80310,#80311); +#80310 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80311 = VECTOR('',#80312,1.); +#80312 = DIRECTION('',(0.,1.,0.)); +#80313 = ORIENTED_EDGE('',*,*,#80314,.T.); +#80314 = EDGE_CURVE('',#80307,#80251,#80315,.T.); +#80315 = LINE('',#80316,#80317); +#80316 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80317 = VECTOR('',#80318,1.); +#80318 = DIRECTION('',(1.,0.,0.)); +#80319 = ORIENTED_EDGE('',*,*,#80267,.T.); +#80320 = PLANE('',#80321); +#80321 = AXIS2_PLACEMENT_3D('',#80322,#80323,#80324); +#80322 = CARTESIAN_POINT('',(4.25,0.,0.19)); +#80323 = DIRECTION('',(0.,0.,1.)); +#80324 = DIRECTION('',(1.,0.,-0.)); +#80325 = ADVANCED_FACE('',(#80326),#80344,.F.); +#80326 = FACE_BOUND('',#80327,.F.); +#80327 = EDGE_LOOP('',(#80328,#80329,#80330,#80338)); +#80328 = ORIENTED_EDGE('',*,*,#80212,.F.); +#80329 = ORIENTED_EDGE('',*,*,#80291,.F.); +#80330 = ORIENTED_EDGE('',*,*,#80331,.F.); +#80331 = EDGE_CURVE('',#80332,#80282,#80334,.T.); +#80332 = VERTEX_POINT('',#80333); +#80333 = CARTESIAN_POINT('',(4.19,7.5E-02,-1.61)); +#80334 = LINE('',#80335,#80336); +#80335 = CARTESIAN_POINT('',(4.14,7.5E-02,-1.61)); +#80336 = VECTOR('',#80337,1.); +#80337 = DIRECTION('',(1.,0.,0.)); +#80338 = ORIENTED_EDGE('',*,*,#80339,.F.); +#80339 = EDGE_CURVE('',#80213,#80332,#80340,.T.); +#80340 = LINE('',#80341,#80342); +#80341 = CARTESIAN_POINT('',(4.19,-7.5E-02,-1.61)); +#80342 = VECTOR('',#80343,1.); +#80343 = DIRECTION('',(0.,1.,0.)); +#80344 = PLANE('',#80345); +#80345 = AXIS2_PLACEMENT_3D('',#80346,#80347,#80348); +#80346 = CARTESIAN_POINT('',(4.25,0.,-1.61)); +#80347 = DIRECTION('',(0.,0.,1.)); +#80348 = DIRECTION('',(1.,0.,-0.)); +#80349 = ADVANCED_FACE('',(#80350),#80368,.F.); +#80350 = FACE_BOUND('',#80351,.F.); +#80351 = EDGE_LOOP('',(#80352,#80353,#80361,#80367)); +#80352 = ORIENTED_EDGE('',*,*,#80228,.T.); +#80353 = ORIENTED_EDGE('',*,*,#80354,.T.); +#80354 = EDGE_CURVE('',#80221,#80355,#80357,.T.); +#80355 = VERTEX_POINT('',#80356); +#80356 = CARTESIAN_POINT('',(4.14,7.5E-02,-1.41)); +#80357 = LINE('',#80358,#80359); +#80358 = CARTESIAN_POINT('',(4.14,-7.5E-02,-1.41)); +#80359 = VECTOR('',#80360,1.); +#80360 = DIRECTION('',(0.,1.,0.)); +#80361 = ORIENTED_EDGE('',*,*,#80362,.F.); +#80362 = EDGE_CURVE('',#80307,#80355,#80363,.T.); +#80363 = LINE('',#80364,#80365); +#80364 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80365 = VECTOR('',#80366,1.); +#80366 = DIRECTION('',(0.,0.,-1.)); +#80367 = ORIENTED_EDGE('',*,*,#80306,.F.); +#80368 = PLANE('',#80369); +#80369 = AXIS2_PLACEMENT_3D('',#80370,#80371,#80372); +#80370 = CARTESIAN_POINT('',(4.14,-7.5E-02,0.19)); +#80371 = DIRECTION('',(1.,0.,0.)); +#80372 = DIRECTION('',(-0.,1.,0.)); +#80373 = ADVANCED_FACE('',(#80374),#80385,.T.); +#80374 = FACE_BOUND('',#80375,.T.); +#80375 = EDGE_LOOP('',(#80376,#80377,#80378,#80384)); +#80376 = ORIENTED_EDGE('',*,*,#80220,.F.); +#80377 = ORIENTED_EDGE('',*,*,#80354,.T.); +#80378 = ORIENTED_EDGE('',*,*,#80379,.T.); +#80379 = EDGE_CURVE('',#80355,#80332,#80380,.T.); +#80380 = LINE('',#80381,#80382); +#80381 = CARTESIAN_POINT('',(3.964264705882,7.5E-02,-0.707058823529)); +#80382 = VECTOR('',#80383,1.); +#80383 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80384 = ORIENTED_EDGE('',*,*,#80339,.F.); +#80385 = PLANE('',#80386); +#80386 = AXIS2_PLACEMENT_3D('',#80387,#80388,#80389); +#80387 = CARTESIAN_POINT('',(4.165,-7.5E-02,-1.51)); +#80388 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80389 = DIRECTION('',(0.,1.,0.)); +#80390 = ADVANCED_FACE('',(#80391),#80399,.F.); +#80391 = FACE_BOUND('',#80392,.F.); +#80392 = EDGE_LOOP('',(#80393,#80394,#80395,#80396,#80397,#80398)); +#80393 = ORIENTED_EDGE('',*,*,#80362,.T.); +#80394 = ORIENTED_EDGE('',*,*,#80379,.T.); +#80395 = ORIENTED_EDGE('',*,*,#80331,.T.); +#80396 = ORIENTED_EDGE('',*,*,#80281,.F.); +#80397 = ORIENTED_EDGE('',*,*,#80250,.F.); +#80398 = ORIENTED_EDGE('',*,*,#80314,.F.); +#80399 = PLANE('',#80400); +#80400 = AXIS2_PLACEMENT_3D('',#80401,#80402,#80403); +#80401 = CARTESIAN_POINT('',(4.14,7.5E-02,0.19)); +#80402 = DIRECTION('',(0.,-1.,0.)); +#80403 = DIRECTION('',(1.,0.,0.)); +#80404 = MANIFOLD_SOLID_BREP('',#80405); +#80405 = CLOSED_SHELL('',(#80406,#80462,#80493,#80517,#80541,#80565, + #80589,#80606)); +#80406 = ADVANCED_FACE('',(#80407),#80457,.F.); +#80407 = FACE_BOUND('',#80408,.F.); +#80408 = EDGE_LOOP('',(#80409,#80419,#80427,#80435,#80443,#80451)); +#80409 = ORIENTED_EDGE('',*,*,#80410,.T.); +#80410 = EDGE_CURVE('',#80411,#80413,#80415,.T.); +#80411 = VERTEX_POINT('',#80412); +#80412 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80413 = VERTEX_POINT('',#80414); +#80414 = CARTESIAN_POINT('',(5.21,-1.425,-1.41)); +#80415 = LINE('',#80416,#80417); +#80416 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80417 = VECTOR('',#80418,1.); +#80418 = DIRECTION('',(0.,0.,-1.)); +#80419 = ORIENTED_EDGE('',*,*,#80420,.T.); +#80420 = EDGE_CURVE('',#80413,#80421,#80423,.T.); +#80421 = VERTEX_POINT('',#80422); +#80422 = CARTESIAN_POINT('',(5.16,-1.425,-1.61)); +#80423 = LINE('',#80424,#80425); +#80424 = CARTESIAN_POINT('',(5.385735294118,-1.425,-0.707058823529)); +#80425 = VECTOR('',#80426,1.); +#80426 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80427 = ORIENTED_EDGE('',*,*,#80428,.T.); +#80428 = EDGE_CURVE('',#80421,#80429,#80431,.T.); +#80429 = VERTEX_POINT('',#80430); +#80430 = CARTESIAN_POINT('',(5.04,-1.425,-1.61)); +#80431 = LINE('',#80432,#80433); +#80432 = CARTESIAN_POINT('',(5.21,-1.425,-1.61)); +#80433 = VECTOR('',#80434,1.); +#80434 = DIRECTION('',(-1.,0.,0.)); +#80435 = ORIENTED_EDGE('',*,*,#80436,.F.); +#80436 = EDGE_CURVE('',#80437,#80429,#80439,.T.); +#80437 = VERTEX_POINT('',#80438); +#80438 = CARTESIAN_POINT('',(4.99,-1.425,-1.41)); +#80439 = LINE('',#80440,#80441); +#80440 = CARTESIAN_POINT('',(4.820735294118,-1.425,-0.732941176471)); +#80441 = VECTOR('',#80442,1.); +#80442 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80443 = ORIENTED_EDGE('',*,*,#80444,.F.); +#80444 = EDGE_CURVE('',#80445,#80437,#80447,.T.); +#80445 = VERTEX_POINT('',#80446); +#80446 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80447 = LINE('',#80448,#80449); +#80448 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80449 = VECTOR('',#80450,1.); +#80450 = DIRECTION('',(0.,0.,-1.)); +#80451 = ORIENTED_EDGE('',*,*,#80452,.F.); +#80452 = EDGE_CURVE('',#80411,#80445,#80453,.T.); +#80453 = LINE('',#80454,#80455); +#80454 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80455 = VECTOR('',#80456,1.); +#80456 = DIRECTION('',(-1.,0.,0.)); +#80457 = PLANE('',#80458); +#80458 = AXIS2_PLACEMENT_3D('',#80459,#80460,#80461); +#80459 = CARTESIAN_POINT('',(5.21,-1.425,0.19)); +#80460 = DIRECTION('',(0.,1.,0.)); +#80461 = DIRECTION('',(-1.,0.,0.)); +#80462 = ADVANCED_FACE('',(#80463),#80488,.F.); +#80463 = FACE_BOUND('',#80464,.F.); +#80464 = EDGE_LOOP('',(#80465,#80475,#80481,#80482)); +#80465 = ORIENTED_EDGE('',*,*,#80466,.T.); +#80466 = EDGE_CURVE('',#80467,#80469,#80471,.T.); +#80467 = VERTEX_POINT('',#80468); +#80468 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80469 = VERTEX_POINT('',#80470); +#80470 = CARTESIAN_POINT('',(5.21,-1.275,-1.41)); +#80471 = LINE('',#80472,#80473); +#80472 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80473 = VECTOR('',#80474,1.); +#80474 = DIRECTION('',(0.,0.,-1.)); +#80475 = ORIENTED_EDGE('',*,*,#80476,.T.); +#80476 = EDGE_CURVE('',#80469,#80413,#80477,.T.); +#80477 = LINE('',#80478,#80479); +#80478 = CARTESIAN_POINT('',(5.21,-1.275,-1.41)); +#80479 = VECTOR('',#80480,1.); +#80480 = DIRECTION('',(0.,-1.,0.)); +#80481 = ORIENTED_EDGE('',*,*,#80410,.F.); +#80482 = ORIENTED_EDGE('',*,*,#80483,.F.); +#80483 = EDGE_CURVE('',#80467,#80411,#80484,.T.); +#80484 = LINE('',#80485,#80486); +#80485 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80486 = VECTOR('',#80487,1.); +#80487 = DIRECTION('',(0.,-1.,0.)); +#80488 = PLANE('',#80489); +#80489 = AXIS2_PLACEMENT_3D('',#80490,#80491,#80492); +#80490 = CARTESIAN_POINT('',(5.21,-1.275,0.19)); +#80491 = DIRECTION('',(-1.,-0.,-0.)); +#80492 = DIRECTION('',(0.,-1.,0.)); +#80493 = ADVANCED_FACE('',(#80494),#80512,.T.); +#80494 = FACE_BOUND('',#80495,.T.); +#80495 = EDGE_LOOP('',(#80496,#80504,#80505,#80506)); +#80496 = ORIENTED_EDGE('',*,*,#80497,.F.); +#80497 = EDGE_CURVE('',#80469,#80498,#80500,.T.); +#80498 = VERTEX_POINT('',#80499); +#80499 = CARTESIAN_POINT('',(5.16,-1.275,-1.61)); +#80500 = LINE('',#80501,#80502); +#80501 = CARTESIAN_POINT('',(5.379264705882,-1.275,-0.732941176471)); +#80502 = VECTOR('',#80503,1.); +#80503 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80504 = ORIENTED_EDGE('',*,*,#80476,.T.); +#80505 = ORIENTED_EDGE('',*,*,#80420,.T.); +#80506 = ORIENTED_EDGE('',*,*,#80507,.F.); +#80507 = EDGE_CURVE('',#80498,#80421,#80508,.T.); +#80508 = LINE('',#80509,#80510); +#80509 = CARTESIAN_POINT('',(5.16,-1.275,-1.61)); +#80510 = VECTOR('',#80511,1.); +#80511 = DIRECTION('',(0.,-1.,0.)); +#80512 = PLANE('',#80513); +#80513 = AXIS2_PLACEMENT_3D('',#80514,#80515,#80516); +#80514 = CARTESIAN_POINT('',(5.185,-1.275,-1.51)); +#80515 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80516 = DIRECTION('',(0.,-1.,0.)); +#80517 = ADVANCED_FACE('',(#80518),#80536,.T.); +#80518 = FACE_BOUND('',#80519,.F.); +#80519 = EDGE_LOOP('',(#80520,#80521,#80529,#80535)); +#80520 = ORIENTED_EDGE('',*,*,#80452,.T.); +#80521 = ORIENTED_EDGE('',*,*,#80522,.T.); +#80522 = EDGE_CURVE('',#80445,#80523,#80525,.T.); +#80523 = VERTEX_POINT('',#80524); +#80524 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80525 = LINE('',#80526,#80527); +#80526 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80527 = VECTOR('',#80528,1.); +#80528 = DIRECTION('',(0.,1.,0.)); +#80529 = ORIENTED_EDGE('',*,*,#80530,.T.); +#80530 = EDGE_CURVE('',#80523,#80467,#80531,.T.); +#80531 = LINE('',#80532,#80533); +#80532 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80533 = VECTOR('',#80534,1.); +#80534 = DIRECTION('',(1.,0.,0.)); +#80535 = ORIENTED_EDGE('',*,*,#80483,.T.); +#80536 = PLANE('',#80537); +#80537 = AXIS2_PLACEMENT_3D('',#80538,#80539,#80540); +#80538 = CARTESIAN_POINT('',(5.1,-1.35,0.19)); +#80539 = DIRECTION('',(0.,0.,1.)); +#80540 = DIRECTION('',(1.,0.,-0.)); +#80541 = ADVANCED_FACE('',(#80542),#80560,.F.); +#80542 = FACE_BOUND('',#80543,.F.); +#80543 = EDGE_LOOP('',(#80544,#80545,#80546,#80554)); +#80544 = ORIENTED_EDGE('',*,*,#80428,.F.); +#80545 = ORIENTED_EDGE('',*,*,#80507,.F.); +#80546 = ORIENTED_EDGE('',*,*,#80547,.F.); +#80547 = EDGE_CURVE('',#80548,#80498,#80550,.T.); +#80548 = VERTEX_POINT('',#80549); +#80549 = CARTESIAN_POINT('',(5.04,-1.275,-1.61)); +#80550 = LINE('',#80551,#80552); +#80551 = CARTESIAN_POINT('',(4.99,-1.275,-1.61)); +#80552 = VECTOR('',#80553,1.); +#80553 = DIRECTION('',(1.,0.,0.)); +#80554 = ORIENTED_EDGE('',*,*,#80555,.F.); +#80555 = EDGE_CURVE('',#80429,#80548,#80556,.T.); +#80556 = LINE('',#80557,#80558); +#80557 = CARTESIAN_POINT('',(5.04,-1.425,-1.61)); +#80558 = VECTOR('',#80559,1.); +#80559 = DIRECTION('',(0.,1.,0.)); +#80560 = PLANE('',#80561); +#80561 = AXIS2_PLACEMENT_3D('',#80562,#80563,#80564); +#80562 = CARTESIAN_POINT('',(5.1,-1.35,-1.61)); +#80563 = DIRECTION('',(0.,0.,1.)); +#80564 = DIRECTION('',(1.,0.,-0.)); +#80565 = ADVANCED_FACE('',(#80566),#80584,.F.); +#80566 = FACE_BOUND('',#80567,.F.); +#80567 = EDGE_LOOP('',(#80568,#80569,#80577,#80583)); +#80568 = ORIENTED_EDGE('',*,*,#80444,.T.); +#80569 = ORIENTED_EDGE('',*,*,#80570,.T.); +#80570 = EDGE_CURVE('',#80437,#80571,#80573,.T.); +#80571 = VERTEX_POINT('',#80572); +#80572 = CARTESIAN_POINT('',(4.99,-1.275,-1.41)); +#80573 = LINE('',#80574,#80575); +#80574 = CARTESIAN_POINT('',(4.99,-1.425,-1.41)); +#80575 = VECTOR('',#80576,1.); +#80576 = DIRECTION('',(0.,1.,0.)); +#80577 = ORIENTED_EDGE('',*,*,#80578,.F.); +#80578 = EDGE_CURVE('',#80523,#80571,#80579,.T.); +#80579 = LINE('',#80580,#80581); +#80580 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80581 = VECTOR('',#80582,1.); +#80582 = DIRECTION('',(0.,0.,-1.)); +#80583 = ORIENTED_EDGE('',*,*,#80522,.F.); +#80584 = PLANE('',#80585); +#80585 = AXIS2_PLACEMENT_3D('',#80586,#80587,#80588); +#80586 = CARTESIAN_POINT('',(4.99,-1.425,0.19)); +#80587 = DIRECTION('',(1.,0.,0.)); +#80588 = DIRECTION('',(-0.,1.,0.)); +#80589 = ADVANCED_FACE('',(#80590),#80601,.T.); +#80590 = FACE_BOUND('',#80591,.T.); +#80591 = EDGE_LOOP('',(#80592,#80593,#80594,#80600)); +#80592 = ORIENTED_EDGE('',*,*,#80436,.F.); +#80593 = ORIENTED_EDGE('',*,*,#80570,.T.); +#80594 = ORIENTED_EDGE('',*,*,#80595,.T.); +#80595 = EDGE_CURVE('',#80571,#80548,#80596,.T.); +#80596 = LINE('',#80597,#80598); +#80597 = CARTESIAN_POINT('',(4.814264705882,-1.275,-0.707058823529)); +#80598 = VECTOR('',#80599,1.); +#80599 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80600 = ORIENTED_EDGE('',*,*,#80555,.F.); +#80601 = PLANE('',#80602); +#80602 = AXIS2_PLACEMENT_3D('',#80603,#80604,#80605); +#80603 = CARTESIAN_POINT('',(5.015,-1.425,-1.51)); +#80604 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80605 = DIRECTION('',(0.,1.,0.)); +#80606 = ADVANCED_FACE('',(#80607),#80615,.F.); +#80607 = FACE_BOUND('',#80608,.F.); +#80608 = EDGE_LOOP('',(#80609,#80610,#80611,#80612,#80613,#80614)); +#80609 = ORIENTED_EDGE('',*,*,#80578,.T.); +#80610 = ORIENTED_EDGE('',*,*,#80595,.T.); +#80611 = ORIENTED_EDGE('',*,*,#80547,.T.); +#80612 = ORIENTED_EDGE('',*,*,#80497,.F.); +#80613 = ORIENTED_EDGE('',*,*,#80466,.F.); +#80614 = ORIENTED_EDGE('',*,*,#80530,.F.); +#80615 = PLANE('',#80616); +#80616 = AXIS2_PLACEMENT_3D('',#80617,#80618,#80619); +#80617 = CARTESIAN_POINT('',(4.99,-1.275,0.19)); +#80618 = DIRECTION('',(0.,-1.,0.)); +#80619 = DIRECTION('',(1.,0.,0.)); +#80620 = MANIFOLD_SOLID_BREP('',#80621); +#80621 = CLOSED_SHELL('',(#80622,#80678,#80709,#80733,#80757,#80781, + #80805,#80822)); +#80622 = ADVANCED_FACE('',(#80623),#80673,.F.); +#80623 = FACE_BOUND('',#80624,.F.); +#80624 = EDGE_LOOP('',(#80625,#80635,#80643,#80651,#80659,#80667)); +#80625 = ORIENTED_EDGE('',*,*,#80626,.T.); +#80626 = EDGE_CURVE('',#80627,#80629,#80631,.T.); +#80627 = VERTEX_POINT('',#80628); +#80628 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80629 = VERTEX_POINT('',#80630); +#80630 = CARTESIAN_POINT('',(5.21,-7.5E-02,-1.41)); +#80631 = LINE('',#80632,#80633); +#80632 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80633 = VECTOR('',#80634,1.); +#80634 = DIRECTION('',(0.,0.,-1.)); +#80635 = ORIENTED_EDGE('',*,*,#80636,.T.); +#80636 = EDGE_CURVE('',#80629,#80637,#80639,.T.); +#80637 = VERTEX_POINT('',#80638); +#80638 = CARTESIAN_POINT('',(5.16,-7.5E-02,-1.61)); +#80639 = LINE('',#80640,#80641); +#80640 = CARTESIAN_POINT('',(5.385735294118,-7.5E-02,-0.707058823529)); +#80641 = VECTOR('',#80642,1.); +#80642 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80643 = ORIENTED_EDGE('',*,*,#80644,.T.); +#80644 = EDGE_CURVE('',#80637,#80645,#80647,.T.); +#80645 = VERTEX_POINT('',#80646); +#80646 = CARTESIAN_POINT('',(5.04,-7.5E-02,-1.61)); +#80647 = LINE('',#80648,#80649); +#80648 = CARTESIAN_POINT('',(5.21,-7.5E-02,-1.61)); +#80649 = VECTOR('',#80650,1.); +#80650 = DIRECTION('',(-1.,0.,0.)); +#80651 = ORIENTED_EDGE('',*,*,#80652,.F.); +#80652 = EDGE_CURVE('',#80653,#80645,#80655,.T.); +#80653 = VERTEX_POINT('',#80654); +#80654 = CARTESIAN_POINT('',(4.99,-7.5E-02,-1.41)); +#80655 = LINE('',#80656,#80657); +#80656 = CARTESIAN_POINT('',(4.820735294118,-7.5E-02,-0.732941176471)); +#80657 = VECTOR('',#80658,1.); +#80658 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80659 = ORIENTED_EDGE('',*,*,#80660,.F.); +#80660 = EDGE_CURVE('',#80661,#80653,#80663,.T.); +#80661 = VERTEX_POINT('',#80662); +#80662 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80663 = LINE('',#80664,#80665); +#80664 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80665 = VECTOR('',#80666,1.); +#80666 = DIRECTION('',(0.,0.,-1.)); +#80667 = ORIENTED_EDGE('',*,*,#80668,.F.); +#80668 = EDGE_CURVE('',#80627,#80661,#80669,.T.); +#80669 = LINE('',#80670,#80671); +#80670 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80671 = VECTOR('',#80672,1.); +#80672 = DIRECTION('',(-1.,0.,0.)); +#80673 = PLANE('',#80674); +#80674 = AXIS2_PLACEMENT_3D('',#80675,#80676,#80677); +#80675 = CARTESIAN_POINT('',(5.21,-7.5E-02,0.19)); +#80676 = DIRECTION('',(0.,1.,0.)); +#80677 = DIRECTION('',(-1.,0.,0.)); +#80678 = ADVANCED_FACE('',(#80679),#80704,.F.); +#80679 = FACE_BOUND('',#80680,.F.); +#80680 = EDGE_LOOP('',(#80681,#80691,#80697,#80698)); +#80681 = ORIENTED_EDGE('',*,*,#80682,.T.); +#80682 = EDGE_CURVE('',#80683,#80685,#80687,.T.); +#80683 = VERTEX_POINT('',#80684); +#80684 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80685 = VERTEX_POINT('',#80686); +#80686 = CARTESIAN_POINT('',(5.21,7.5E-02,-1.41)); +#80687 = LINE('',#80688,#80689); +#80688 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80689 = VECTOR('',#80690,1.); +#80690 = DIRECTION('',(0.,0.,-1.)); +#80691 = ORIENTED_EDGE('',*,*,#80692,.T.); +#80692 = EDGE_CURVE('',#80685,#80629,#80693,.T.); +#80693 = LINE('',#80694,#80695); +#80694 = CARTESIAN_POINT('',(5.21,7.5E-02,-1.41)); +#80695 = VECTOR('',#80696,1.); +#80696 = DIRECTION('',(0.,-1.,0.)); +#80697 = ORIENTED_EDGE('',*,*,#80626,.F.); +#80698 = ORIENTED_EDGE('',*,*,#80699,.F.); +#80699 = EDGE_CURVE('',#80683,#80627,#80700,.T.); +#80700 = LINE('',#80701,#80702); +#80701 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80702 = VECTOR('',#80703,1.); +#80703 = DIRECTION('',(0.,-1.,0.)); +#80704 = PLANE('',#80705); +#80705 = AXIS2_PLACEMENT_3D('',#80706,#80707,#80708); +#80706 = CARTESIAN_POINT('',(5.21,7.5E-02,0.19)); +#80707 = DIRECTION('',(-1.,-0.,-0.)); +#80708 = DIRECTION('',(0.,-1.,0.)); +#80709 = ADVANCED_FACE('',(#80710),#80728,.T.); +#80710 = FACE_BOUND('',#80711,.T.); +#80711 = EDGE_LOOP('',(#80712,#80720,#80721,#80722)); +#80712 = ORIENTED_EDGE('',*,*,#80713,.F.); +#80713 = EDGE_CURVE('',#80685,#80714,#80716,.T.); +#80714 = VERTEX_POINT('',#80715); +#80715 = CARTESIAN_POINT('',(5.16,7.5E-02,-1.61)); +#80716 = LINE('',#80717,#80718); +#80717 = CARTESIAN_POINT('',(5.379264705882,7.5E-02,-0.732941176471)); +#80718 = VECTOR('',#80719,1.); +#80719 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80720 = ORIENTED_EDGE('',*,*,#80692,.T.); +#80721 = ORIENTED_EDGE('',*,*,#80636,.T.); +#80722 = ORIENTED_EDGE('',*,*,#80723,.F.); +#80723 = EDGE_CURVE('',#80714,#80637,#80724,.T.); +#80724 = LINE('',#80725,#80726); +#80725 = CARTESIAN_POINT('',(5.16,7.5E-02,-1.61)); +#80726 = VECTOR('',#80727,1.); +#80727 = DIRECTION('',(0.,-1.,0.)); +#80728 = PLANE('',#80729); +#80729 = AXIS2_PLACEMENT_3D('',#80730,#80731,#80732); +#80730 = CARTESIAN_POINT('',(5.185,7.5E-02,-1.51)); +#80731 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80732 = DIRECTION('',(0.,-1.,0.)); +#80733 = ADVANCED_FACE('',(#80734),#80752,.T.); +#80734 = FACE_BOUND('',#80735,.F.); +#80735 = EDGE_LOOP('',(#80736,#80737,#80745,#80751)); +#80736 = ORIENTED_EDGE('',*,*,#80668,.T.); +#80737 = ORIENTED_EDGE('',*,*,#80738,.T.); +#80738 = EDGE_CURVE('',#80661,#80739,#80741,.T.); +#80739 = VERTEX_POINT('',#80740); +#80740 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80741 = LINE('',#80742,#80743); +#80742 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80743 = VECTOR('',#80744,1.); +#80744 = DIRECTION('',(0.,1.,0.)); +#80745 = ORIENTED_EDGE('',*,*,#80746,.T.); +#80746 = EDGE_CURVE('',#80739,#80683,#80747,.T.); +#80747 = LINE('',#80748,#80749); +#80748 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80749 = VECTOR('',#80750,1.); +#80750 = DIRECTION('',(1.,0.,0.)); +#80751 = ORIENTED_EDGE('',*,*,#80699,.T.); +#80752 = PLANE('',#80753); +#80753 = AXIS2_PLACEMENT_3D('',#80754,#80755,#80756); +#80754 = CARTESIAN_POINT('',(5.1,0.,0.19)); +#80755 = DIRECTION('',(0.,0.,1.)); +#80756 = DIRECTION('',(1.,0.,-0.)); +#80757 = ADVANCED_FACE('',(#80758),#80776,.F.); +#80758 = FACE_BOUND('',#80759,.F.); +#80759 = EDGE_LOOP('',(#80760,#80761,#80762,#80770)); +#80760 = ORIENTED_EDGE('',*,*,#80644,.F.); +#80761 = ORIENTED_EDGE('',*,*,#80723,.F.); +#80762 = ORIENTED_EDGE('',*,*,#80763,.F.); +#80763 = EDGE_CURVE('',#80764,#80714,#80766,.T.); +#80764 = VERTEX_POINT('',#80765); +#80765 = CARTESIAN_POINT('',(5.04,7.5E-02,-1.61)); +#80766 = LINE('',#80767,#80768); +#80767 = CARTESIAN_POINT('',(4.99,7.5E-02,-1.61)); +#80768 = VECTOR('',#80769,1.); +#80769 = DIRECTION('',(1.,0.,0.)); +#80770 = ORIENTED_EDGE('',*,*,#80771,.F.); +#80771 = EDGE_CURVE('',#80645,#80764,#80772,.T.); +#80772 = LINE('',#80773,#80774); +#80773 = CARTESIAN_POINT('',(5.04,-7.5E-02,-1.61)); +#80774 = VECTOR('',#80775,1.); +#80775 = DIRECTION('',(0.,1.,0.)); +#80776 = PLANE('',#80777); +#80777 = AXIS2_PLACEMENT_3D('',#80778,#80779,#80780); +#80778 = CARTESIAN_POINT('',(5.1,0.,-1.61)); +#80779 = DIRECTION('',(0.,0.,1.)); +#80780 = DIRECTION('',(1.,0.,-0.)); +#80781 = ADVANCED_FACE('',(#80782),#80800,.F.); +#80782 = FACE_BOUND('',#80783,.F.); +#80783 = EDGE_LOOP('',(#80784,#80785,#80793,#80799)); +#80784 = ORIENTED_EDGE('',*,*,#80660,.T.); +#80785 = ORIENTED_EDGE('',*,*,#80786,.T.); +#80786 = EDGE_CURVE('',#80653,#80787,#80789,.T.); +#80787 = VERTEX_POINT('',#80788); +#80788 = CARTESIAN_POINT('',(4.99,7.5E-02,-1.41)); +#80789 = LINE('',#80790,#80791); +#80790 = CARTESIAN_POINT('',(4.99,-7.5E-02,-1.41)); +#80791 = VECTOR('',#80792,1.); +#80792 = DIRECTION('',(0.,1.,0.)); +#80793 = ORIENTED_EDGE('',*,*,#80794,.F.); +#80794 = EDGE_CURVE('',#80739,#80787,#80795,.T.); +#80795 = LINE('',#80796,#80797); +#80796 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80797 = VECTOR('',#80798,1.); +#80798 = DIRECTION('',(0.,0.,-1.)); +#80799 = ORIENTED_EDGE('',*,*,#80738,.F.); +#80800 = PLANE('',#80801); +#80801 = AXIS2_PLACEMENT_3D('',#80802,#80803,#80804); +#80802 = CARTESIAN_POINT('',(4.99,-7.5E-02,0.19)); +#80803 = DIRECTION('',(1.,0.,0.)); +#80804 = DIRECTION('',(-0.,1.,0.)); +#80805 = ADVANCED_FACE('',(#80806),#80817,.T.); +#80806 = FACE_BOUND('',#80807,.T.); +#80807 = EDGE_LOOP('',(#80808,#80809,#80810,#80816)); +#80808 = ORIENTED_EDGE('',*,*,#80652,.F.); +#80809 = ORIENTED_EDGE('',*,*,#80786,.T.); +#80810 = ORIENTED_EDGE('',*,*,#80811,.T.); +#80811 = EDGE_CURVE('',#80787,#80764,#80812,.T.); +#80812 = LINE('',#80813,#80814); +#80813 = CARTESIAN_POINT('',(4.814264705882,7.5E-02,-0.707058823529)); +#80814 = VECTOR('',#80815,1.); +#80815 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80816 = ORIENTED_EDGE('',*,*,#80771,.F.); +#80817 = PLANE('',#80818); +#80818 = AXIS2_PLACEMENT_3D('',#80819,#80820,#80821); +#80819 = CARTESIAN_POINT('',(5.015,-7.5E-02,-1.51)); +#80820 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#80821 = DIRECTION('',(0.,1.,0.)); +#80822 = ADVANCED_FACE('',(#80823),#80831,.F.); +#80823 = FACE_BOUND('',#80824,.F.); +#80824 = EDGE_LOOP('',(#80825,#80826,#80827,#80828,#80829,#80830)); +#80825 = ORIENTED_EDGE('',*,*,#80794,.T.); +#80826 = ORIENTED_EDGE('',*,*,#80811,.T.); +#80827 = ORIENTED_EDGE('',*,*,#80763,.T.); +#80828 = ORIENTED_EDGE('',*,*,#80713,.F.); +#80829 = ORIENTED_EDGE('',*,*,#80682,.F.); +#80830 = ORIENTED_EDGE('',*,*,#80746,.F.); +#80831 = PLANE('',#80832); +#80832 = AXIS2_PLACEMENT_3D('',#80833,#80834,#80835); +#80833 = CARTESIAN_POINT('',(4.99,7.5E-02,0.19)); +#80834 = DIRECTION('',(0.,-1.,0.)); +#80835 = DIRECTION('',(1.,0.,0.)); +#80836 = MANIFOLD_SOLID_BREP('',#80837); +#80837 = CLOSED_SHELL('',(#80838,#80894,#80925,#80949,#80973,#80997, + #81021,#81038)); +#80838 = ADVANCED_FACE('',(#80839),#80889,.F.); +#80839 = FACE_BOUND('',#80840,.F.); +#80840 = EDGE_LOOP('',(#80841,#80851,#80859,#80867,#80875,#80883)); +#80841 = ORIENTED_EDGE('',*,*,#80842,.T.); +#80842 = EDGE_CURVE('',#80843,#80845,#80847,.T.); +#80843 = VERTEX_POINT('',#80844); +#80844 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80845 = VERTEX_POINT('',#80846); +#80846 = CARTESIAN_POINT('',(6.06,-1.425,-1.41)); +#80847 = LINE('',#80848,#80849); +#80848 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80849 = VECTOR('',#80850,1.); +#80850 = DIRECTION('',(0.,0.,-1.)); +#80851 = ORIENTED_EDGE('',*,*,#80852,.T.); +#80852 = EDGE_CURVE('',#80845,#80853,#80855,.T.); +#80853 = VERTEX_POINT('',#80854); +#80854 = CARTESIAN_POINT('',(6.01,-1.425,-1.61)); +#80855 = LINE('',#80856,#80857); +#80856 = CARTESIAN_POINT('',(6.235735294118,-1.425,-0.707058823529)); +#80857 = VECTOR('',#80858,1.); +#80858 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#80859 = ORIENTED_EDGE('',*,*,#80860,.T.); +#80860 = EDGE_CURVE('',#80853,#80861,#80863,.T.); +#80861 = VERTEX_POINT('',#80862); +#80862 = CARTESIAN_POINT('',(5.89,-1.425,-1.61)); +#80863 = LINE('',#80864,#80865); +#80864 = CARTESIAN_POINT('',(6.06,-1.425,-1.61)); +#80865 = VECTOR('',#80866,1.); +#80866 = DIRECTION('',(-1.,0.,0.)); +#80867 = ORIENTED_EDGE('',*,*,#80868,.F.); +#80868 = EDGE_CURVE('',#80869,#80861,#80871,.T.); +#80869 = VERTEX_POINT('',#80870); +#80870 = CARTESIAN_POINT('',(5.84,-1.425,-1.41)); +#80871 = LINE('',#80872,#80873); +#80872 = CARTESIAN_POINT('',(5.670735294118,-1.425,-0.732941176471)); +#80873 = VECTOR('',#80874,1.); +#80874 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#80875 = ORIENTED_EDGE('',*,*,#80876,.F.); +#80876 = EDGE_CURVE('',#80877,#80869,#80879,.T.); +#80877 = VERTEX_POINT('',#80878); +#80878 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#80879 = LINE('',#80880,#80881); +#80880 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#80881 = VECTOR('',#80882,1.); +#80882 = DIRECTION('',(0.,0.,-1.)); +#80883 = ORIENTED_EDGE('',*,*,#80884,.F.); +#80884 = EDGE_CURVE('',#80843,#80877,#80885,.T.); +#80885 = LINE('',#80886,#80887); +#80886 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80887 = VECTOR('',#80888,1.); +#80888 = DIRECTION('',(-1.,0.,0.)); +#80889 = PLANE('',#80890); +#80890 = AXIS2_PLACEMENT_3D('',#80891,#80892,#80893); +#80891 = CARTESIAN_POINT('',(6.06,-1.425,0.19)); +#80892 = DIRECTION('',(0.,1.,0.)); +#80893 = DIRECTION('',(-1.,0.,0.)); +#80894 = ADVANCED_FACE('',(#80895),#80920,.F.); +#80895 = FACE_BOUND('',#80896,.F.); +#80896 = EDGE_LOOP('',(#80897,#80907,#80913,#80914)); +#80897 = ORIENTED_EDGE('',*,*,#80898,.T.); +#80898 = EDGE_CURVE('',#80899,#80901,#80903,.T.); +#80899 = VERTEX_POINT('',#80900); +#80900 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80901 = VERTEX_POINT('',#80902); +#80902 = CARTESIAN_POINT('',(6.06,-1.275,-1.41)); +#80903 = LINE('',#80904,#80905); +#80904 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80905 = VECTOR('',#80906,1.); +#80906 = DIRECTION('',(0.,0.,-1.)); +#80907 = ORIENTED_EDGE('',*,*,#80908,.T.); +#80908 = EDGE_CURVE('',#80901,#80845,#80909,.T.); +#80909 = LINE('',#80910,#80911); +#80910 = CARTESIAN_POINT('',(6.06,-1.275,-1.41)); +#80911 = VECTOR('',#80912,1.); +#80912 = DIRECTION('',(0.,-1.,0.)); +#80913 = ORIENTED_EDGE('',*,*,#80842,.F.); +#80914 = ORIENTED_EDGE('',*,*,#80915,.F.); +#80915 = EDGE_CURVE('',#80899,#80843,#80916,.T.); +#80916 = LINE('',#80917,#80918); +#80917 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80918 = VECTOR('',#80919,1.); +#80919 = DIRECTION('',(0.,-1.,0.)); +#80920 = PLANE('',#80921); +#80921 = AXIS2_PLACEMENT_3D('',#80922,#80923,#80924); +#80922 = CARTESIAN_POINT('',(6.06,-1.275,0.19)); +#80923 = DIRECTION('',(-1.,-0.,-0.)); +#80924 = DIRECTION('',(0.,-1.,0.)); +#80925 = ADVANCED_FACE('',(#80926),#80944,.T.); +#80926 = FACE_BOUND('',#80927,.T.); +#80927 = EDGE_LOOP('',(#80928,#80936,#80937,#80938)); +#80928 = ORIENTED_EDGE('',*,*,#80929,.F.); +#80929 = EDGE_CURVE('',#80901,#80930,#80932,.T.); +#80930 = VERTEX_POINT('',#80931); +#80931 = CARTESIAN_POINT('',(6.01,-1.275,-1.61)); +#80932 = LINE('',#80933,#80934); +#80933 = CARTESIAN_POINT('',(6.229264705882,-1.275,-0.732941176471)); +#80934 = VECTOR('',#80935,1.); +#80935 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#80936 = ORIENTED_EDGE('',*,*,#80908,.T.); +#80937 = ORIENTED_EDGE('',*,*,#80852,.T.); +#80938 = ORIENTED_EDGE('',*,*,#80939,.F.); +#80939 = EDGE_CURVE('',#80930,#80853,#80940,.T.); +#80940 = LINE('',#80941,#80942); +#80941 = CARTESIAN_POINT('',(6.01,-1.275,-1.61)); +#80942 = VECTOR('',#80943,1.); +#80943 = DIRECTION('',(0.,-1.,0.)); +#80944 = PLANE('',#80945); +#80945 = AXIS2_PLACEMENT_3D('',#80946,#80947,#80948); +#80946 = CARTESIAN_POINT('',(6.035,-1.275,-1.51)); +#80947 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#80948 = DIRECTION('',(0.,-1.,0.)); +#80949 = ADVANCED_FACE('',(#80950),#80968,.T.); +#80950 = FACE_BOUND('',#80951,.F.); +#80951 = EDGE_LOOP('',(#80952,#80953,#80961,#80967)); +#80952 = ORIENTED_EDGE('',*,*,#80884,.T.); +#80953 = ORIENTED_EDGE('',*,*,#80954,.T.); +#80954 = EDGE_CURVE('',#80877,#80955,#80957,.T.); +#80955 = VERTEX_POINT('',#80956); +#80956 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#80957 = LINE('',#80958,#80959); +#80958 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#80959 = VECTOR('',#80960,1.); +#80960 = DIRECTION('',(0.,1.,0.)); +#80961 = ORIENTED_EDGE('',*,*,#80962,.T.); +#80962 = EDGE_CURVE('',#80955,#80899,#80963,.T.); +#80963 = LINE('',#80964,#80965); +#80964 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#80965 = VECTOR('',#80966,1.); +#80966 = DIRECTION('',(1.,0.,0.)); +#80967 = ORIENTED_EDGE('',*,*,#80915,.T.); +#80968 = PLANE('',#80969); +#80969 = AXIS2_PLACEMENT_3D('',#80970,#80971,#80972); +#80970 = CARTESIAN_POINT('',(5.95,-1.35,0.19)); +#80971 = DIRECTION('',(0.,0.,1.)); +#80972 = DIRECTION('',(1.,0.,-0.)); +#80973 = ADVANCED_FACE('',(#80974),#80992,.F.); +#80974 = FACE_BOUND('',#80975,.F.); +#80975 = EDGE_LOOP('',(#80976,#80977,#80978,#80986)); +#80976 = ORIENTED_EDGE('',*,*,#80860,.F.); +#80977 = ORIENTED_EDGE('',*,*,#80939,.F.); +#80978 = ORIENTED_EDGE('',*,*,#80979,.F.); +#80979 = EDGE_CURVE('',#80980,#80930,#80982,.T.); +#80980 = VERTEX_POINT('',#80981); +#80981 = CARTESIAN_POINT('',(5.89,-1.275,-1.61)); +#80982 = LINE('',#80983,#80984); +#80983 = CARTESIAN_POINT('',(5.84,-1.275,-1.61)); +#80984 = VECTOR('',#80985,1.); +#80985 = DIRECTION('',(1.,0.,0.)); +#80986 = ORIENTED_EDGE('',*,*,#80987,.F.); +#80987 = EDGE_CURVE('',#80861,#80980,#80988,.T.); +#80988 = LINE('',#80989,#80990); +#80989 = CARTESIAN_POINT('',(5.89,-1.425,-1.61)); +#80990 = VECTOR('',#80991,1.); +#80991 = DIRECTION('',(0.,1.,0.)); +#80992 = PLANE('',#80993); +#80993 = AXIS2_PLACEMENT_3D('',#80994,#80995,#80996); +#80994 = CARTESIAN_POINT('',(5.95,-1.35,-1.61)); +#80995 = DIRECTION('',(0.,0.,1.)); +#80996 = DIRECTION('',(1.,0.,-0.)); +#80997 = ADVANCED_FACE('',(#80998),#81016,.F.); +#80998 = FACE_BOUND('',#80999,.F.); +#80999 = EDGE_LOOP('',(#81000,#81001,#81009,#81015)); +#81000 = ORIENTED_EDGE('',*,*,#80876,.T.); +#81001 = ORIENTED_EDGE('',*,*,#81002,.T.); +#81002 = EDGE_CURVE('',#80869,#81003,#81005,.T.); +#81003 = VERTEX_POINT('',#81004); +#81004 = CARTESIAN_POINT('',(5.84,-1.275,-1.41)); +#81005 = LINE('',#81006,#81007); +#81006 = CARTESIAN_POINT('',(5.84,-1.425,-1.41)); +#81007 = VECTOR('',#81008,1.); +#81008 = DIRECTION('',(0.,1.,0.)); +#81009 = ORIENTED_EDGE('',*,*,#81010,.F.); +#81010 = EDGE_CURVE('',#80955,#81003,#81011,.T.); +#81011 = LINE('',#81012,#81013); +#81012 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#81013 = VECTOR('',#81014,1.); +#81014 = DIRECTION('',(0.,0.,-1.)); +#81015 = ORIENTED_EDGE('',*,*,#80954,.F.); +#81016 = PLANE('',#81017); +#81017 = AXIS2_PLACEMENT_3D('',#81018,#81019,#81020); +#81018 = CARTESIAN_POINT('',(5.84,-1.425,0.19)); +#81019 = DIRECTION('',(1.,0.,0.)); +#81020 = DIRECTION('',(-0.,1.,0.)); +#81021 = ADVANCED_FACE('',(#81022),#81033,.T.); +#81022 = FACE_BOUND('',#81023,.T.); +#81023 = EDGE_LOOP('',(#81024,#81025,#81026,#81032)); +#81024 = ORIENTED_EDGE('',*,*,#80868,.F.); +#81025 = ORIENTED_EDGE('',*,*,#81002,.T.); +#81026 = ORIENTED_EDGE('',*,*,#81027,.T.); +#81027 = EDGE_CURVE('',#81003,#80980,#81028,.T.); +#81028 = LINE('',#81029,#81030); +#81029 = CARTESIAN_POINT('',(5.664264705882,-1.275,-0.707058823529)); +#81030 = VECTOR('',#81031,1.); +#81031 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#81032 = ORIENTED_EDGE('',*,*,#80987,.F.); +#81033 = PLANE('',#81034); +#81034 = AXIS2_PLACEMENT_3D('',#81035,#81036,#81037); +#81035 = CARTESIAN_POINT('',(5.865,-1.425,-1.51)); +#81036 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#81037 = DIRECTION('',(0.,1.,0.)); +#81038 = ADVANCED_FACE('',(#81039),#81047,.F.); +#81039 = FACE_BOUND('',#81040,.F.); +#81040 = EDGE_LOOP('',(#81041,#81042,#81043,#81044,#81045,#81046)); +#81041 = ORIENTED_EDGE('',*,*,#81010,.T.); +#81042 = ORIENTED_EDGE('',*,*,#81027,.T.); +#81043 = ORIENTED_EDGE('',*,*,#80979,.T.); +#81044 = ORIENTED_EDGE('',*,*,#80929,.F.); +#81045 = ORIENTED_EDGE('',*,*,#80898,.F.); +#81046 = ORIENTED_EDGE('',*,*,#80962,.F.); +#81047 = PLANE('',#81048); +#81048 = AXIS2_PLACEMENT_3D('',#81049,#81050,#81051); +#81049 = CARTESIAN_POINT('',(5.84,-1.275,0.19)); +#81050 = DIRECTION('',(0.,-1.,0.)); +#81051 = DIRECTION('',(1.,0.,0.)); +#81052 = MANIFOLD_SOLID_BREP('',#81053); +#81053 = CLOSED_SHELL('',(#81054,#81110,#81141,#81165,#81189,#81213, + #81237,#81254)); +#81054 = ADVANCED_FACE('',(#81055),#81105,.F.); +#81055 = FACE_BOUND('',#81056,.F.); +#81056 = EDGE_LOOP('',(#81057,#81067,#81075,#81083,#81091,#81099)); +#81057 = ORIENTED_EDGE('',*,*,#81058,.T.); +#81058 = EDGE_CURVE('',#81059,#81061,#81063,.T.); +#81059 = VERTEX_POINT('',#81060); +#81060 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81061 = VERTEX_POINT('',#81062); +#81062 = CARTESIAN_POINT('',(6.06,-7.5E-02,-1.41)); +#81063 = LINE('',#81064,#81065); +#81064 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81065 = VECTOR('',#81066,1.); +#81066 = DIRECTION('',(0.,0.,-1.)); +#81067 = ORIENTED_EDGE('',*,*,#81068,.T.); +#81068 = EDGE_CURVE('',#81061,#81069,#81071,.T.); +#81069 = VERTEX_POINT('',#81070); +#81070 = CARTESIAN_POINT('',(6.01,-7.5E-02,-1.61)); +#81071 = LINE('',#81072,#81073); +#81072 = CARTESIAN_POINT('',(6.235735294118,-7.5E-02,-0.707058823529)); +#81073 = VECTOR('',#81074,1.); +#81074 = DIRECTION('',(-0.242535625036,0.,-0.970142500145)); +#81075 = ORIENTED_EDGE('',*,*,#81076,.T.); +#81076 = EDGE_CURVE('',#81069,#81077,#81079,.T.); +#81077 = VERTEX_POINT('',#81078); +#81078 = CARTESIAN_POINT('',(5.89,-7.5E-02,-1.61)); +#81079 = LINE('',#81080,#81081); +#81080 = CARTESIAN_POINT('',(6.06,-7.5E-02,-1.61)); +#81081 = VECTOR('',#81082,1.); +#81082 = DIRECTION('',(-1.,0.,0.)); +#81083 = ORIENTED_EDGE('',*,*,#81084,.F.); +#81084 = EDGE_CURVE('',#81085,#81077,#81087,.T.); +#81085 = VERTEX_POINT('',#81086); +#81086 = CARTESIAN_POINT('',(5.84,-7.5E-02,-1.41)); +#81087 = LINE('',#81088,#81089); +#81088 = CARTESIAN_POINT('',(5.670735294118,-7.5E-02,-0.732941176471)); +#81089 = VECTOR('',#81090,1.); +#81090 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#81091 = ORIENTED_EDGE('',*,*,#81092,.F.); +#81092 = EDGE_CURVE('',#81093,#81085,#81095,.T.); +#81093 = VERTEX_POINT('',#81094); +#81094 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81095 = LINE('',#81096,#81097); +#81096 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81097 = VECTOR('',#81098,1.); +#81098 = DIRECTION('',(0.,0.,-1.)); +#81099 = ORIENTED_EDGE('',*,*,#81100,.F.); +#81100 = EDGE_CURVE('',#81059,#81093,#81101,.T.); +#81101 = LINE('',#81102,#81103); +#81102 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81103 = VECTOR('',#81104,1.); +#81104 = DIRECTION('',(-1.,0.,0.)); +#81105 = PLANE('',#81106); +#81106 = AXIS2_PLACEMENT_3D('',#81107,#81108,#81109); +#81107 = CARTESIAN_POINT('',(6.06,-7.5E-02,0.19)); +#81108 = DIRECTION('',(0.,1.,0.)); +#81109 = DIRECTION('',(-1.,0.,0.)); +#81110 = ADVANCED_FACE('',(#81111),#81136,.F.); +#81111 = FACE_BOUND('',#81112,.F.); +#81112 = EDGE_LOOP('',(#81113,#81123,#81129,#81130)); +#81113 = ORIENTED_EDGE('',*,*,#81114,.T.); +#81114 = EDGE_CURVE('',#81115,#81117,#81119,.T.); +#81115 = VERTEX_POINT('',#81116); +#81116 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81117 = VERTEX_POINT('',#81118); +#81118 = CARTESIAN_POINT('',(6.06,7.5E-02,-1.41)); +#81119 = LINE('',#81120,#81121); +#81120 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81121 = VECTOR('',#81122,1.); +#81122 = DIRECTION('',(0.,0.,-1.)); +#81123 = ORIENTED_EDGE('',*,*,#81124,.T.); +#81124 = EDGE_CURVE('',#81117,#81061,#81125,.T.); +#81125 = LINE('',#81126,#81127); +#81126 = CARTESIAN_POINT('',(6.06,7.5E-02,-1.41)); +#81127 = VECTOR('',#81128,1.); +#81128 = DIRECTION('',(0.,-1.,0.)); +#81129 = ORIENTED_EDGE('',*,*,#81058,.F.); +#81130 = ORIENTED_EDGE('',*,*,#81131,.F.); +#81131 = EDGE_CURVE('',#81115,#81059,#81132,.T.); +#81132 = LINE('',#81133,#81134); +#81133 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81134 = VECTOR('',#81135,1.); +#81135 = DIRECTION('',(0.,-1.,0.)); +#81136 = PLANE('',#81137); +#81137 = AXIS2_PLACEMENT_3D('',#81138,#81139,#81140); +#81138 = CARTESIAN_POINT('',(6.06,7.5E-02,0.19)); +#81139 = DIRECTION('',(-1.,-0.,-0.)); +#81140 = DIRECTION('',(0.,-1.,0.)); +#81141 = ADVANCED_FACE('',(#81142),#81160,.T.); +#81142 = FACE_BOUND('',#81143,.T.); +#81143 = EDGE_LOOP('',(#81144,#81152,#81153,#81154)); +#81144 = ORIENTED_EDGE('',*,*,#81145,.F.); +#81145 = EDGE_CURVE('',#81117,#81146,#81148,.T.); +#81146 = VERTEX_POINT('',#81147); +#81147 = CARTESIAN_POINT('',(6.01,7.5E-02,-1.61)); +#81148 = LINE('',#81149,#81150); +#81149 = CARTESIAN_POINT('',(6.229264705882,7.5E-02,-0.732941176471)); +#81150 = VECTOR('',#81151,1.); +#81151 = DIRECTION('',(-0.242535625036,-0.,-0.970142500145)); +#81152 = ORIENTED_EDGE('',*,*,#81124,.T.); +#81153 = ORIENTED_EDGE('',*,*,#81068,.T.); +#81154 = ORIENTED_EDGE('',*,*,#81155,.F.); +#81155 = EDGE_CURVE('',#81146,#81069,#81156,.T.); +#81156 = LINE('',#81157,#81158); +#81157 = CARTESIAN_POINT('',(6.01,7.5E-02,-1.61)); +#81158 = VECTOR('',#81159,1.); +#81159 = DIRECTION('',(0.,-1.,0.)); +#81160 = PLANE('',#81161); +#81161 = AXIS2_PLACEMENT_3D('',#81162,#81163,#81164); +#81162 = CARTESIAN_POINT('',(6.035,7.5E-02,-1.51)); +#81163 = DIRECTION('',(0.970142500145,0.,-0.242535625036)); +#81164 = DIRECTION('',(0.,-1.,0.)); +#81165 = ADVANCED_FACE('',(#81166),#81184,.T.); +#81166 = FACE_BOUND('',#81167,.F.); +#81167 = EDGE_LOOP('',(#81168,#81169,#81177,#81183)); +#81168 = ORIENTED_EDGE('',*,*,#81100,.T.); +#81169 = ORIENTED_EDGE('',*,*,#81170,.T.); +#81170 = EDGE_CURVE('',#81093,#81171,#81173,.T.); +#81171 = VERTEX_POINT('',#81172); +#81172 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81173 = LINE('',#81174,#81175); +#81174 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81175 = VECTOR('',#81176,1.); +#81176 = DIRECTION('',(0.,1.,0.)); +#81177 = ORIENTED_EDGE('',*,*,#81178,.T.); +#81178 = EDGE_CURVE('',#81171,#81115,#81179,.T.); +#81179 = LINE('',#81180,#81181); +#81180 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81181 = VECTOR('',#81182,1.); +#81182 = DIRECTION('',(1.,0.,0.)); +#81183 = ORIENTED_EDGE('',*,*,#81131,.T.); +#81184 = PLANE('',#81185); +#81185 = AXIS2_PLACEMENT_3D('',#81186,#81187,#81188); +#81186 = CARTESIAN_POINT('',(5.95,0.,0.19)); +#81187 = DIRECTION('',(0.,0.,1.)); +#81188 = DIRECTION('',(1.,0.,-0.)); +#81189 = ADVANCED_FACE('',(#81190),#81208,.F.); +#81190 = FACE_BOUND('',#81191,.F.); +#81191 = EDGE_LOOP('',(#81192,#81193,#81194,#81202)); +#81192 = ORIENTED_EDGE('',*,*,#81076,.F.); +#81193 = ORIENTED_EDGE('',*,*,#81155,.F.); +#81194 = ORIENTED_EDGE('',*,*,#81195,.F.); +#81195 = EDGE_CURVE('',#81196,#81146,#81198,.T.); +#81196 = VERTEX_POINT('',#81197); +#81197 = CARTESIAN_POINT('',(5.89,7.5E-02,-1.61)); +#81198 = LINE('',#81199,#81200); +#81199 = CARTESIAN_POINT('',(5.84,7.5E-02,-1.61)); +#81200 = VECTOR('',#81201,1.); +#81201 = DIRECTION('',(1.,0.,0.)); +#81202 = ORIENTED_EDGE('',*,*,#81203,.F.); +#81203 = EDGE_CURVE('',#81077,#81196,#81204,.T.); +#81204 = LINE('',#81205,#81206); +#81205 = CARTESIAN_POINT('',(5.89,-7.5E-02,-1.61)); +#81206 = VECTOR('',#81207,1.); +#81207 = DIRECTION('',(0.,1.,0.)); +#81208 = PLANE('',#81209); +#81209 = AXIS2_PLACEMENT_3D('',#81210,#81211,#81212); +#81210 = CARTESIAN_POINT('',(5.95,0.,-1.61)); +#81211 = DIRECTION('',(0.,0.,1.)); +#81212 = DIRECTION('',(1.,0.,-0.)); +#81213 = ADVANCED_FACE('',(#81214),#81232,.F.); +#81214 = FACE_BOUND('',#81215,.F.); +#81215 = EDGE_LOOP('',(#81216,#81217,#81225,#81231)); +#81216 = ORIENTED_EDGE('',*,*,#81092,.T.); +#81217 = ORIENTED_EDGE('',*,*,#81218,.T.); +#81218 = EDGE_CURVE('',#81085,#81219,#81221,.T.); +#81219 = VERTEX_POINT('',#81220); +#81220 = CARTESIAN_POINT('',(5.84,7.5E-02,-1.41)); +#81221 = LINE('',#81222,#81223); +#81222 = CARTESIAN_POINT('',(5.84,-7.5E-02,-1.41)); +#81223 = VECTOR('',#81224,1.); +#81224 = DIRECTION('',(0.,1.,0.)); +#81225 = ORIENTED_EDGE('',*,*,#81226,.F.); +#81226 = EDGE_CURVE('',#81171,#81219,#81227,.T.); +#81227 = LINE('',#81228,#81229); +#81228 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81229 = VECTOR('',#81230,1.); +#81230 = DIRECTION('',(0.,0.,-1.)); +#81231 = ORIENTED_EDGE('',*,*,#81170,.F.); +#81232 = PLANE('',#81233); +#81233 = AXIS2_PLACEMENT_3D('',#81234,#81235,#81236); +#81234 = CARTESIAN_POINT('',(5.84,-7.5E-02,0.19)); +#81235 = DIRECTION('',(1.,0.,0.)); +#81236 = DIRECTION('',(-0.,1.,0.)); +#81237 = ADVANCED_FACE('',(#81238),#81249,.T.); +#81238 = FACE_BOUND('',#81239,.T.); +#81239 = EDGE_LOOP('',(#81240,#81241,#81242,#81248)); +#81240 = ORIENTED_EDGE('',*,*,#81084,.F.); +#81241 = ORIENTED_EDGE('',*,*,#81218,.T.); +#81242 = ORIENTED_EDGE('',*,*,#81243,.T.); +#81243 = EDGE_CURVE('',#81219,#81196,#81244,.T.); +#81244 = LINE('',#81245,#81246); +#81245 = CARTESIAN_POINT('',(5.664264705882,7.5E-02,-0.707058823529)); +#81246 = VECTOR('',#81247,1.); +#81247 = DIRECTION('',(0.242535625036,0.,-0.970142500145)); +#81248 = ORIENTED_EDGE('',*,*,#81203,.F.); +#81249 = PLANE('',#81250); +#81250 = AXIS2_PLACEMENT_3D('',#81251,#81252,#81253); +#81251 = CARTESIAN_POINT('',(5.865,-7.5E-02,-1.51)); +#81252 = DIRECTION('',(-0.970142500145,0.,-0.242535625036)); +#81253 = DIRECTION('',(0.,1.,0.)); +#81254 = ADVANCED_FACE('',(#81255),#81263,.F.); +#81255 = FACE_BOUND('',#81256,.F.); +#81256 = EDGE_LOOP('',(#81257,#81258,#81259,#81260,#81261,#81262)); +#81257 = ORIENTED_EDGE('',*,*,#81226,.T.); +#81258 = ORIENTED_EDGE('',*,*,#81243,.T.); +#81259 = ORIENTED_EDGE('',*,*,#81195,.T.); +#81260 = ORIENTED_EDGE('',*,*,#81145,.F.); +#81261 = ORIENTED_EDGE('',*,*,#81114,.F.); +#81262 = ORIENTED_EDGE('',*,*,#81178,.F.); +#81263 = PLANE('',#81264); +#81264 = AXIS2_PLACEMENT_3D('',#81265,#81266,#81267); +#81265 = CARTESIAN_POINT('',(5.84,7.5E-02,0.19)); +#81266 = DIRECTION('',(0.,-1.,0.)); +#81267 = DIRECTION('',(1.,0.,0.)); +#81268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#81272)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#81269,#81270,#81271)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#81269 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#81270 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#81271 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#81272 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#81269, + 'distance_accuracy_value','confusion accuracy'); +#81273 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#81274,#81276); +#81274 = ( REPRESENTATION_RELATIONSHIP('','',#66662,#66639) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#81275) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#81275 = ITEM_DEFINED_TRANSFORMATION('','',#11,#66640); +#81276 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #81277); +#81277 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('91','=>[0:1:1:41]','',#66634, + #66657,$); +#81278 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#66659)); +#81279 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#81280,#81282); +#81280 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#81281) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#81281 = ITEM_DEFINED_TRANSFORMATION('','',#11,#303); +#81282 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #81283); +#81283 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('93','Q4','',#5,#36156,$); +#81284 = SHAPE_DEFINITION_REPRESENTATION(#81285,#81291); +#81285 = PRODUCT_DEFINITION_SHAPE('','',#81286); +#81286 = PRODUCT_DEFINITION('design','',#81287,#81290); +#81287 = PRODUCT_DEFINITION_FORMATION('','',#81288); +#81288 = PRODUCT( + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal', + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal','',(#81289) + ); +#81289 = PRODUCT_CONTEXT('',#2,'mechanical'); +#81290 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#81291 = SHAPE_REPRESENTATION('',(#11,#81292),#81296); +#81292 = AXIS2_PLACEMENT_3D('',#81293,#81294,#81295); +#81293 = CARTESIAN_POINT('',(0.,0.,0.)); +#81294 = DIRECTION('',(0.,0.,1.)); +#81295 = DIRECTION('',(1.,0.,-0.)); +#81296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#81300)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#81297,#81298,#81299)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#81297 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#81298 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#81299 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#81300 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#81297, + 'distance_accuracy_value','confusion accuracy'); +#81301 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#81302,#81304); +#81302 = ( REPRESENTATION_RELATIONSHIP('','',#81291,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#81303) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#81303 = ITEM_DEFINED_TRANSFORMATION('','',#11,#307); +#81304 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #81305); +#81305 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('95','P1','',#5,#81286,$); +#81306 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#81288)); +#81307 = SHAPE_DEFINITION_REPRESENTATION(#81308,#81314); +#81308 = PRODUCT_DEFINITION_SHAPE('','',#81309); +#81309 = PRODUCT_DEFINITION('design','',#81310,#81313); +#81310 = PRODUCT_DEFINITION_FORMATION('','',#81311); +#81311 = PRODUCT( + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal', + 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal','',(#81312) + ); +#81312 = PRODUCT_CONTEXT('',#2,'mechanical'); +#81313 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#81314 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#81315),#87098); +#81315 = MANIFOLD_SOLID_BREP('',#81316); +#81316 = CLOSED_SHELL('',(#81317,#81591,#81669,#81863,#81887,#81958, + #81982,#82006,#82023,#82047,#82064,#82081,#82112,#82136,#82160, + #82177,#82208,#82232,#82256,#82273,#82304,#82328,#82352,#82369, + #82400,#82424,#82448,#82465,#82496,#82520,#82544,#82561,#82583, + #82655,#82667,#82679,#82691,#82720,#82743,#82766,#82783,#82812, + #82835,#82858,#82875,#82904,#82927,#82950,#82967,#82996,#83019, + #83042,#83059,#83088,#83111,#83134,#83151,#83163,#83175,#83187, + #83199,#83211,#83223,#83334,#83445,#83556,#83667,#83778,#83809, + #83833,#83857,#83881,#83912,#83936,#83960,#83984,#84015,#84039, + #84063,#84087,#84118,#84142,#84166,#84190,#84221,#84245,#84269, + #84293,#84309,#84342,#84367,#84399,#84430,#84440,#84458,#84474, + #84507,#84532,#84564,#84595,#84605,#84623,#84639,#84672,#84697, + #84729,#84760,#84770,#84788,#84804,#84837,#84862,#84894,#84925, + #84935,#84953,#84969,#85002,#85027,#85059,#85090,#85100,#85118, + #85173,#85228,#85283,#85338,#85393,#85418,#85529,#85539,#85564, + #85675,#85685,#85710,#85821,#85831,#85856,#85967,#85977,#86002, + #86113,#86123,#86133,#86164,#86188,#86212,#86229,#86239,#86270, + #86294,#86318,#86335,#86345,#86376,#86400,#86424,#86441,#86451, + #86482,#86506,#86530,#86547,#86557,#86588,#86612,#86636,#86653, + #86669,#86686,#86703,#86720,#86730,#86746,#86763,#86780,#86797, + #86807,#86823,#86840,#86857,#86874,#86884,#86900,#86917,#86934, + #86951,#86961,#86977,#86994,#87011,#87028,#87038,#87050,#87062, + #87074,#87086)); +#81317 = ADVANCED_FACE('',(#81318,#81416,#81450,#81484,#81518,#81552), + #81586,.F.); +#81318 = FACE_BOUND('',#81319,.F.); +#81319 = EDGE_LOOP('',(#81320,#81330,#81338,#81346,#81354,#81362,#81370, + #81378,#81386,#81394,#81402,#81410)); +#81320 = ORIENTED_EDGE('',*,*,#81321,.F.); +#81321 = EDGE_CURVE('',#81322,#81324,#81326,.T.); +#81322 = VERTEX_POINT('',#81323); +#81323 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81324 = VERTEX_POINT('',#81325); +#81325 = CARTESIAN_POINT('',(-2.5,-3.83,0.)); +#81326 = LINE('',#81327,#81328); +#81327 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81328 = VECTOR('',#81329,1.); +#81329 = DIRECTION('',(0.,1.,0.)); +#81330 = ORIENTED_EDGE('',*,*,#81331,.T.); +#81331 = EDGE_CURVE('',#81322,#81332,#81334,.T.); +#81332 = VERTEX_POINT('',#81333); +#81333 = CARTESIAN_POINT('',(22.5,-4.6,0.)); +#81334 = LINE('',#81335,#81336); +#81335 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81336 = VECTOR('',#81337,1.); +#81337 = DIRECTION('',(1.,0.,0.)); +#81338 = ORIENTED_EDGE('',*,*,#81339,.T.); +#81339 = EDGE_CURVE('',#81332,#81340,#81342,.T.); +#81340 = VERTEX_POINT('',#81341); +#81341 = CARTESIAN_POINT('',(22.5,-3.83,0.)); +#81342 = LINE('',#81343,#81344); +#81343 = CARTESIAN_POINT('',(22.5,-4.6,0.)); +#81344 = VECTOR('',#81345,1.); +#81345 = DIRECTION('',(0.,1.,0.)); +#81346 = ORIENTED_EDGE('',*,*,#81347,.F.); +#81347 = EDGE_CURVE('',#81348,#81340,#81350,.T.); +#81348 = VERTEX_POINT('',#81349); +#81349 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#81350 = LINE('',#81351,#81352); +#81351 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#81352 = VECTOR('',#81353,1.); +#81353 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81354 = ORIENTED_EDGE('',*,*,#81355,.F.); +#81355 = EDGE_CURVE('',#81356,#81348,#81358,.T.); +#81356 = VERTEX_POINT('',#81357); +#81357 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#81358 = LINE('',#81359,#81360); +#81359 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#81360 = VECTOR('',#81361,1.); +#81361 = DIRECTION('',(0.,-1.,0.)); +#81362 = ORIENTED_EDGE('',*,*,#81363,.F.); +#81363 = EDGE_CURVE('',#81364,#81356,#81366,.T.); +#81364 = VERTEX_POINT('',#81365); +#81365 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#81366 = LINE('',#81367,#81368); +#81367 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#81368 = VECTOR('',#81369,1.); +#81369 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#81370 = ORIENTED_EDGE('',*,*,#81371,.T.); +#81371 = EDGE_CURVE('',#81364,#81372,#81374,.T.); +#81372 = VERTEX_POINT('',#81373); +#81373 = CARTESIAN_POINT('',(22.5,5.2,0.)); +#81374 = LINE('',#81375,#81376); +#81375 = CARTESIAN_POINT('',(22.5,-4.6,0.)); +#81376 = VECTOR('',#81377,1.); +#81377 = DIRECTION('',(0.,1.,0.)); +#81378 = ORIENTED_EDGE('',*,*,#81379,.F.); +#81379 = EDGE_CURVE('',#81380,#81372,#81382,.T.); +#81380 = VERTEX_POINT('',#81381); +#81381 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#81382 = LINE('',#81383,#81384); +#81383 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#81384 = VECTOR('',#81385,1.); +#81385 = DIRECTION('',(1.,0.,0.)); +#81386 = ORIENTED_EDGE('',*,*,#81387,.F.); +#81387 = EDGE_CURVE('',#81388,#81380,#81390,.T.); +#81388 = VERTEX_POINT('',#81389); +#81389 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#81390 = LINE('',#81391,#81392); +#81391 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81392 = VECTOR('',#81393,1.); +#81393 = DIRECTION('',(0.,1.,0.)); +#81394 = ORIENTED_EDGE('',*,*,#81395,.T.); +#81395 = EDGE_CURVE('',#81388,#81396,#81398,.T.); +#81396 = VERTEX_POINT('',#81397); +#81397 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81398 = LINE('',#81399,#81400); +#81399 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#81400 = VECTOR('',#81401,1.); +#81401 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#81402 = ORIENTED_EDGE('',*,*,#81403,.T.); +#81403 = EDGE_CURVE('',#81396,#81404,#81406,.T.); +#81404 = VERTEX_POINT('',#81405); +#81405 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81406 = LINE('',#81407,#81408); +#81407 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81408 = VECTOR('',#81409,1.); +#81409 = DIRECTION('',(0.,-1.,0.)); +#81410 = ORIENTED_EDGE('',*,*,#81411,.T.); +#81411 = EDGE_CURVE('',#81404,#81324,#81412,.T.); +#81412 = LINE('',#81413,#81414); +#81413 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81414 = VECTOR('',#81415,1.); +#81415 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81416 = FACE_BOUND('',#81417,.F.); +#81417 = EDGE_LOOP('',(#81418,#81428,#81436,#81444)); +#81418 = ORIENTED_EDGE('',*,*,#81419,.F.); +#81419 = EDGE_CURVE('',#81420,#81422,#81424,.T.); +#81420 = VERTEX_POINT('',#81421); +#81421 = CARTESIAN_POINT('',(19.55,-0.45,0.)); +#81422 = VERTEX_POINT('',#81423); +#81423 = CARTESIAN_POINT('',(20.45,-0.45,0.)); +#81424 = LINE('',#81425,#81426); +#81425 = CARTESIAN_POINT('',(8.525,-0.45,0.)); +#81426 = VECTOR('',#81427,1.); +#81427 = DIRECTION('',(1.,0.,-0.)); +#81428 = ORIENTED_EDGE('',*,*,#81429,.F.); +#81429 = EDGE_CURVE('',#81430,#81420,#81432,.T.); +#81430 = VERTEX_POINT('',#81431); +#81431 = CARTESIAN_POINT('',(19.55,0.45,0.)); +#81432 = LINE('',#81433,#81434); +#81433 = CARTESIAN_POINT('',(19.55,-2.075,0.)); +#81434 = VECTOR('',#81435,1.); +#81435 = DIRECTION('',(0.,-1.,0.)); +#81436 = ORIENTED_EDGE('',*,*,#81437,.F.); +#81437 = EDGE_CURVE('',#81438,#81430,#81440,.T.); +#81438 = VERTEX_POINT('',#81439); +#81439 = CARTESIAN_POINT('',(20.45,0.45,0.)); +#81440 = LINE('',#81441,#81442); +#81441 = CARTESIAN_POINT('',(8.975,0.45,0.)); +#81442 = VECTOR('',#81443,1.); +#81443 = DIRECTION('',(-1.,0.,0.)); +#81444 = ORIENTED_EDGE('',*,*,#81445,.F.); +#81445 = EDGE_CURVE('',#81422,#81438,#81446,.T.); +#81446 = LINE('',#81447,#81448); +#81447 = CARTESIAN_POINT('',(20.45,-2.525,0.)); +#81448 = VECTOR('',#81449,1.); +#81449 = DIRECTION('',(0.,1.,0.)); +#81450 = FACE_BOUND('',#81451,.F.); +#81451 = EDGE_LOOP('',(#81452,#81462,#81470,#81478)); +#81452 = ORIENTED_EDGE('',*,*,#81453,.F.); +#81453 = EDGE_CURVE('',#81454,#81456,#81458,.T.); +#81454 = VERTEX_POINT('',#81455); +#81455 = CARTESIAN_POINT('',(14.55,-0.45,0.)); +#81456 = VERTEX_POINT('',#81457); +#81457 = CARTESIAN_POINT('',(15.45,-0.45,0.)); +#81458 = LINE('',#81459,#81460); +#81459 = CARTESIAN_POINT('',(6.025,-0.45,0.)); +#81460 = VECTOR('',#81461,1.); +#81461 = DIRECTION('',(1.,0.,-0.)); +#81462 = ORIENTED_EDGE('',*,*,#81463,.F.); +#81463 = EDGE_CURVE('',#81464,#81454,#81466,.T.); +#81464 = VERTEX_POINT('',#81465); +#81465 = CARTESIAN_POINT('',(14.55,0.45,0.)); +#81466 = LINE('',#81467,#81468); +#81467 = CARTESIAN_POINT('',(14.55,-2.075,0.)); +#81468 = VECTOR('',#81469,1.); +#81469 = DIRECTION('',(0.,-1.,0.)); +#81470 = ORIENTED_EDGE('',*,*,#81471,.F.); +#81471 = EDGE_CURVE('',#81472,#81464,#81474,.T.); +#81472 = VERTEX_POINT('',#81473); +#81473 = CARTESIAN_POINT('',(15.45,0.45,0.)); +#81474 = LINE('',#81475,#81476); +#81475 = CARTESIAN_POINT('',(6.475,0.45,0.)); +#81476 = VECTOR('',#81477,1.); +#81477 = DIRECTION('',(-1.,0.,0.)); +#81478 = ORIENTED_EDGE('',*,*,#81479,.F.); +#81479 = EDGE_CURVE('',#81456,#81472,#81480,.T.); +#81480 = LINE('',#81481,#81482); +#81481 = CARTESIAN_POINT('',(15.45,-2.525,0.)); +#81482 = VECTOR('',#81483,1.); +#81483 = DIRECTION('',(0.,1.,0.)); +#81484 = FACE_BOUND('',#81485,.F.); +#81485 = EDGE_LOOP('',(#81486,#81496,#81504,#81512)); +#81486 = ORIENTED_EDGE('',*,*,#81487,.F.); +#81487 = EDGE_CURVE('',#81488,#81490,#81492,.T.); +#81488 = VERTEX_POINT('',#81489); +#81489 = CARTESIAN_POINT('',(9.55,-0.45,0.)); +#81490 = VERTEX_POINT('',#81491); +#81491 = CARTESIAN_POINT('',(10.45,-0.45,0.)); +#81492 = LINE('',#81493,#81494); +#81493 = CARTESIAN_POINT('',(3.525,-0.45,0.)); +#81494 = VECTOR('',#81495,1.); +#81495 = DIRECTION('',(1.,0.,-0.)); +#81496 = ORIENTED_EDGE('',*,*,#81497,.F.); +#81497 = EDGE_CURVE('',#81498,#81488,#81500,.T.); +#81498 = VERTEX_POINT('',#81499); +#81499 = CARTESIAN_POINT('',(9.55,0.45,0.)); +#81500 = LINE('',#81501,#81502); +#81501 = CARTESIAN_POINT('',(9.55,-2.075,0.)); +#81502 = VECTOR('',#81503,1.); +#81503 = DIRECTION('',(0.,-1.,0.)); +#81504 = ORIENTED_EDGE('',*,*,#81505,.F.); +#81505 = EDGE_CURVE('',#81506,#81498,#81508,.T.); +#81506 = VERTEX_POINT('',#81507); +#81507 = CARTESIAN_POINT('',(10.45,0.45,0.)); +#81508 = LINE('',#81509,#81510); +#81509 = CARTESIAN_POINT('',(3.975,0.45,0.)); +#81510 = VECTOR('',#81511,1.); +#81511 = DIRECTION('',(-1.,0.,0.)); +#81512 = ORIENTED_EDGE('',*,*,#81513,.F.); +#81513 = EDGE_CURVE('',#81490,#81506,#81514,.T.); +#81514 = LINE('',#81515,#81516); +#81515 = CARTESIAN_POINT('',(10.45,-2.525,0.)); +#81516 = VECTOR('',#81517,1.); +#81517 = DIRECTION('',(0.,1.,0.)); +#81518 = FACE_BOUND('',#81519,.F.); +#81519 = EDGE_LOOP('',(#81520,#81530,#81538,#81546)); +#81520 = ORIENTED_EDGE('',*,*,#81521,.F.); +#81521 = EDGE_CURVE('',#81522,#81524,#81526,.T.); +#81522 = VERTEX_POINT('',#81523); +#81523 = CARTESIAN_POINT('',(4.55,-0.45,0.)); +#81524 = VERTEX_POINT('',#81525); +#81525 = CARTESIAN_POINT('',(5.45,-0.45,0.)); +#81526 = LINE('',#81527,#81528); +#81527 = CARTESIAN_POINT('',(1.025,-0.45,0.)); +#81528 = VECTOR('',#81529,1.); +#81529 = DIRECTION('',(1.,0.,-0.)); +#81530 = ORIENTED_EDGE('',*,*,#81531,.F.); +#81531 = EDGE_CURVE('',#81532,#81522,#81534,.T.); +#81532 = VERTEX_POINT('',#81533); +#81533 = CARTESIAN_POINT('',(4.55,0.45,0.)); +#81534 = LINE('',#81535,#81536); +#81535 = CARTESIAN_POINT('',(4.55,-2.075,0.)); +#81536 = VECTOR('',#81537,1.); +#81537 = DIRECTION('',(0.,-1.,0.)); +#81538 = ORIENTED_EDGE('',*,*,#81539,.F.); +#81539 = EDGE_CURVE('',#81540,#81532,#81542,.T.); +#81540 = VERTEX_POINT('',#81541); +#81541 = CARTESIAN_POINT('',(5.45,0.45,0.)); +#81542 = LINE('',#81543,#81544); +#81543 = CARTESIAN_POINT('',(1.475,0.45,0.)); +#81544 = VECTOR('',#81545,1.); +#81545 = DIRECTION('',(-1.,0.,0.)); +#81546 = ORIENTED_EDGE('',*,*,#81547,.F.); +#81547 = EDGE_CURVE('',#81524,#81540,#81548,.T.); +#81548 = LINE('',#81549,#81550); +#81549 = CARTESIAN_POINT('',(5.45,-2.525,0.)); +#81550 = VECTOR('',#81551,1.); +#81551 = DIRECTION('',(0.,1.,0.)); +#81552 = FACE_BOUND('',#81553,.F.); +#81553 = EDGE_LOOP('',(#81554,#81564,#81572,#81580)); +#81554 = ORIENTED_EDGE('',*,*,#81555,.F.); +#81555 = EDGE_CURVE('',#81556,#81558,#81560,.T.); +#81556 = VERTEX_POINT('',#81557); +#81557 = CARTESIAN_POINT('',(-0.45,-0.45,0.)); +#81558 = VERTEX_POINT('',#81559); +#81559 = CARTESIAN_POINT('',(0.45,-0.45,0.)); +#81560 = LINE('',#81561,#81562); +#81561 = CARTESIAN_POINT('',(-1.475,-0.45,0.)); +#81562 = VECTOR('',#81563,1.); +#81563 = DIRECTION('',(1.,0.,-0.)); +#81564 = ORIENTED_EDGE('',*,*,#81565,.F.); +#81565 = EDGE_CURVE('',#81566,#81556,#81568,.T.); +#81566 = VERTEX_POINT('',#81567); +#81567 = CARTESIAN_POINT('',(-0.45,0.45,0.)); +#81568 = LINE('',#81569,#81570); +#81569 = CARTESIAN_POINT('',(-0.45,-2.075,0.)); +#81570 = VECTOR('',#81571,1.); +#81571 = DIRECTION('',(0.,-1.,0.)); +#81572 = ORIENTED_EDGE('',*,*,#81573,.F.); +#81573 = EDGE_CURVE('',#81574,#81566,#81576,.T.); +#81574 = VERTEX_POINT('',#81575); +#81575 = CARTESIAN_POINT('',(0.45,0.45,0.)); +#81576 = LINE('',#81577,#81578); +#81577 = CARTESIAN_POINT('',(-1.025,0.45,0.)); +#81578 = VECTOR('',#81579,1.); +#81579 = DIRECTION('',(-1.,0.,0.)); +#81580 = ORIENTED_EDGE('',*,*,#81581,.F.); +#81581 = EDGE_CURVE('',#81558,#81574,#81582,.T.); +#81582 = LINE('',#81583,#81584); +#81583 = CARTESIAN_POINT('',(0.45,-2.525,0.)); +#81584 = VECTOR('',#81585,1.); +#81585 = DIRECTION('',(0.,1.,0.)); +#81586 = PLANE('',#81587); +#81587 = AXIS2_PLACEMENT_3D('',#81588,#81589,#81590); +#81588 = CARTESIAN_POINT('',(-2.5,-4.6,0.)); +#81589 = DIRECTION('',(0.,0.,1.)); +#81590 = DIRECTION('',(0.,1.,0.)); +#81591 = ADVANCED_FACE('',(#81592),#81664,.F.); +#81592 = FACE_BOUND('',#81593,.F.); +#81593 = EDGE_LOOP('',(#81594,#81604,#81612,#81618,#81619,#81627,#81635, + #81641,#81642,#81650,#81658)); +#81594 = ORIENTED_EDGE('',*,*,#81595,.T.); +#81595 = EDGE_CURVE('',#81596,#81598,#81600,.T.); +#81596 = VERTEX_POINT('',#81597); +#81597 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#81598 = VERTEX_POINT('',#81599); +#81599 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#81600 = LINE('',#81601,#81602); +#81601 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#81602 = VECTOR('',#81603,1.); +#81603 = DIRECTION('',(0.,-0.228191322789,-0.973616310568)); +#81604 = ORIENTED_EDGE('',*,*,#81605,.T.); +#81605 = EDGE_CURVE('',#81598,#81606,#81608,.T.); +#81606 = VERTEX_POINT('',#81607); +#81607 = CARTESIAN_POINT('',(-2.5,-4.6,7.4)); +#81608 = LINE('',#81609,#81610); +#81609 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#81610 = VECTOR('',#81611,1.); +#81611 = DIRECTION('',(0.,-1.,0.)); +#81612 = ORIENTED_EDGE('',*,*,#81613,.T.); +#81613 = EDGE_CURVE('',#81606,#81322,#81614,.T.); +#81614 = LINE('',#81615,#81616); +#81615 = CARTESIAN_POINT('',(-2.5,-4.6,13.8)); +#81616 = VECTOR('',#81617,1.); +#81617 = DIRECTION('',(0.,0.,-1.)); +#81618 = ORIENTED_EDGE('',*,*,#81321,.T.); +#81619 = ORIENTED_EDGE('',*,*,#81620,.T.); +#81620 = EDGE_CURVE('',#81324,#81621,#81623,.T.); +#81621 = VERTEX_POINT('',#81622); +#81622 = CARTESIAN_POINT('',(-2.5,-3.83,7.)); +#81623 = LINE('',#81624,#81625); +#81624 = CARTESIAN_POINT('',(-2.5,-3.83,0.)); +#81625 = VECTOR('',#81626,1.); +#81626 = DIRECTION('',(0.,0.,1.)); +#81627 = ORIENTED_EDGE('',*,*,#81628,.T.); +#81628 = EDGE_CURVE('',#81621,#81629,#81631,.T.); +#81629 = VERTEX_POINT('',#81630); +#81630 = CARTESIAN_POINT('',(-2.5,-3.37,7.)); +#81631 = LINE('',#81632,#81633); +#81632 = CARTESIAN_POINT('',(-2.5,-3.83,7.)); +#81633 = VECTOR('',#81634,1.); +#81634 = DIRECTION('',(0.,1.,0.)); +#81635 = ORIENTED_EDGE('',*,*,#81636,.F.); +#81636 = EDGE_CURVE('',#81388,#81629,#81637,.T.); +#81637 = LINE('',#81638,#81639); +#81638 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#81639 = VECTOR('',#81640,1.); +#81640 = DIRECTION('',(0.,0.,1.)); +#81641 = ORIENTED_EDGE('',*,*,#81387,.T.); +#81642 = ORIENTED_EDGE('',*,*,#81643,.T.); +#81643 = EDGE_CURVE('',#81380,#81644,#81646,.T.); +#81644 = VERTEX_POINT('',#81645); +#81645 = CARTESIAN_POINT('',(-2.5,5.2,4.57)); +#81646 = LINE('',#81647,#81648); +#81647 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#81648 = VECTOR('',#81649,1.); +#81649 = DIRECTION('',(0.,0.,1.)); +#81650 = ORIENTED_EDGE('',*,*,#81651,.F.); +#81651 = EDGE_CURVE('',#81652,#81644,#81654,.T.); +#81652 = VERTEX_POINT('',#81653); +#81653 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#81654 = LINE('',#81655,#81656); +#81655 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#81656 = VECTOR('',#81657,1.); +#81657 = DIRECTION('',(0.,0.309109370483,-0.951026496518)); +#81658 = ORIENTED_EDGE('',*,*,#81659,.T.); +#81659 = EDGE_CURVE('',#81652,#81596,#81660,.T.); +#81660 = LINE('',#81661,#81662); +#81661 = CARTESIAN_POINT('',(-2.5,5.2,13.8)); +#81662 = VECTOR('',#81663,1.); +#81663 = DIRECTION('',(0.,-1.,0.)); +#81664 = PLANE('',#81665); +#81665 = AXIS2_PLACEMENT_3D('',#81666,#81667,#81668); +#81666 = CARTESIAN_POINT('',(-2.5,0.3,6.9)); +#81667 = DIRECTION('',(1.,0.,0.)); +#81668 = DIRECTION('',(-0.,0.,1.)); +#81669 = ADVANCED_FACE('',(#81670,#81688,#81722,#81756,#81790,#81824), + #81858,.F.); +#81670 = FACE_BOUND('',#81671,.F.); +#81671 = EDGE_LOOP('',(#81672,#81673,#81681,#81687)); +#81672 = ORIENTED_EDGE('',*,*,#81613,.F.); +#81673 = ORIENTED_EDGE('',*,*,#81674,.T.); +#81674 = EDGE_CURVE('',#81606,#81675,#81677,.T.); +#81675 = VERTEX_POINT('',#81676); +#81676 = CARTESIAN_POINT('',(22.5,-4.6,7.4)); +#81677 = LINE('',#81678,#81679); +#81678 = CARTESIAN_POINT('',(-2.5,-4.6,7.4)); +#81679 = VECTOR('',#81680,1.); +#81680 = DIRECTION('',(1.,0.,0.)); +#81681 = ORIENTED_EDGE('',*,*,#81682,.T.); +#81682 = EDGE_CURVE('',#81675,#81332,#81683,.T.); +#81683 = LINE('',#81684,#81685); +#81684 = CARTESIAN_POINT('',(22.5,-4.6,13.8)); +#81685 = VECTOR('',#81686,1.); +#81686 = DIRECTION('',(0.,0.,-1.)); +#81687 = ORIENTED_EDGE('',*,*,#81331,.F.); +#81688 = FACE_BOUND('',#81689,.F.); +#81689 = EDGE_LOOP('',(#81690,#81700,#81708,#81716)); +#81690 = ORIENTED_EDGE('',*,*,#81691,.F.); +#81691 = EDGE_CURVE('',#81692,#81694,#81696,.T.); +#81692 = VERTEX_POINT('',#81693); +#81693 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#81694 = VERTEX_POINT('',#81695); +#81695 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#81696 = LINE('',#81697,#81698); +#81697 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#81698 = VECTOR('',#81699,1.); +#81699 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81700 = ORIENTED_EDGE('',*,*,#81701,.F.); +#81701 = EDGE_CURVE('',#81702,#81692,#81704,.T.); +#81702 = VERTEX_POINT('',#81703); +#81703 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#81704 = LINE('',#81705,#81706); +#81705 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#81706 = VECTOR('',#81707,1.); +#81707 = DIRECTION('',(0.,0.,-1.)); +#81708 = ORIENTED_EDGE('',*,*,#81709,.F.); +#81709 = EDGE_CURVE('',#81710,#81702,#81712,.T.); +#81710 = VERTEX_POINT('',#81711); +#81711 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#81712 = LINE('',#81713,#81714); +#81713 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#81714 = VECTOR('',#81715,1.); +#81715 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81716 = ORIENTED_EDGE('',*,*,#81717,.F.); +#81717 = EDGE_CURVE('',#81694,#81710,#81718,.T.); +#81718 = LINE('',#81719,#81720); +#81719 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#81720 = VECTOR('',#81721,1.); +#81721 = DIRECTION('',(0.,0.,1.)); +#81722 = FACE_BOUND('',#81723,.F.); +#81723 = EDGE_LOOP('',(#81724,#81734,#81742,#81750)); +#81724 = ORIENTED_EDGE('',*,*,#81725,.F.); +#81725 = EDGE_CURVE('',#81726,#81728,#81730,.T.); +#81726 = VERTEX_POINT('',#81727); +#81727 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#81728 = VERTEX_POINT('',#81729); +#81729 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#81730 = LINE('',#81731,#81732); +#81731 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#81732 = VECTOR('',#81733,1.); +#81733 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81734 = ORIENTED_EDGE('',*,*,#81735,.F.); +#81735 = EDGE_CURVE('',#81736,#81726,#81738,.T.); +#81736 = VERTEX_POINT('',#81737); +#81737 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#81738 = LINE('',#81739,#81740); +#81739 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#81740 = VECTOR('',#81741,1.); +#81741 = DIRECTION('',(0.,0.,-1.)); +#81742 = ORIENTED_EDGE('',*,*,#81743,.F.); +#81743 = EDGE_CURVE('',#81744,#81736,#81746,.T.); +#81744 = VERTEX_POINT('',#81745); +#81745 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#81746 = LINE('',#81747,#81748); +#81747 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#81748 = VECTOR('',#81749,1.); +#81749 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81750 = ORIENTED_EDGE('',*,*,#81751,.F.); +#81751 = EDGE_CURVE('',#81728,#81744,#81752,.T.); +#81752 = LINE('',#81753,#81754); +#81753 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#81754 = VECTOR('',#81755,1.); +#81755 = DIRECTION('',(0.,0.,1.)); +#81756 = FACE_BOUND('',#81757,.F.); +#81757 = EDGE_LOOP('',(#81758,#81768,#81776,#81784)); +#81758 = ORIENTED_EDGE('',*,*,#81759,.F.); +#81759 = EDGE_CURVE('',#81760,#81762,#81764,.T.); +#81760 = VERTEX_POINT('',#81761); +#81761 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#81762 = VERTEX_POINT('',#81763); +#81763 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#81764 = LINE('',#81765,#81766); +#81765 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#81766 = VECTOR('',#81767,1.); +#81767 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81768 = ORIENTED_EDGE('',*,*,#81769,.F.); +#81769 = EDGE_CURVE('',#81770,#81760,#81772,.T.); +#81770 = VERTEX_POINT('',#81771); +#81771 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#81772 = LINE('',#81773,#81774); +#81773 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#81774 = VECTOR('',#81775,1.); +#81775 = DIRECTION('',(0.,0.,-1.)); +#81776 = ORIENTED_EDGE('',*,*,#81777,.F.); +#81777 = EDGE_CURVE('',#81778,#81770,#81780,.T.); +#81778 = VERTEX_POINT('',#81779); +#81779 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#81780 = LINE('',#81781,#81782); +#81781 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#81782 = VECTOR('',#81783,1.); +#81783 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81784 = ORIENTED_EDGE('',*,*,#81785,.F.); +#81785 = EDGE_CURVE('',#81762,#81778,#81786,.T.); +#81786 = LINE('',#81787,#81788); +#81787 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#81788 = VECTOR('',#81789,1.); +#81789 = DIRECTION('',(0.,0.,1.)); +#81790 = FACE_BOUND('',#81791,.F.); +#81791 = EDGE_LOOP('',(#81792,#81802,#81810,#81818)); +#81792 = ORIENTED_EDGE('',*,*,#81793,.F.); +#81793 = EDGE_CURVE('',#81794,#81796,#81798,.T.); +#81794 = VERTEX_POINT('',#81795); +#81795 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#81796 = VERTEX_POINT('',#81797); +#81797 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#81798 = LINE('',#81799,#81800); +#81799 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#81800 = VECTOR('',#81801,1.); +#81801 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81802 = ORIENTED_EDGE('',*,*,#81803,.F.); +#81803 = EDGE_CURVE('',#81804,#81794,#81806,.T.); +#81804 = VERTEX_POINT('',#81805); +#81805 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#81806 = LINE('',#81807,#81808); +#81807 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#81808 = VECTOR('',#81809,1.); +#81809 = DIRECTION('',(0.,0.,-1.)); +#81810 = ORIENTED_EDGE('',*,*,#81811,.F.); +#81811 = EDGE_CURVE('',#81812,#81804,#81814,.T.); +#81812 = VERTEX_POINT('',#81813); +#81813 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#81814 = LINE('',#81815,#81816); +#81815 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#81816 = VECTOR('',#81817,1.); +#81817 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81818 = ORIENTED_EDGE('',*,*,#81819,.F.); +#81819 = EDGE_CURVE('',#81796,#81812,#81820,.T.); +#81820 = LINE('',#81821,#81822); +#81821 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#81822 = VECTOR('',#81823,1.); +#81823 = DIRECTION('',(0.,0.,1.)); +#81824 = FACE_BOUND('',#81825,.F.); +#81825 = EDGE_LOOP('',(#81826,#81836,#81844,#81852)); +#81826 = ORIENTED_EDGE('',*,*,#81827,.F.); +#81827 = EDGE_CURVE('',#81828,#81830,#81832,.T.); +#81828 = VERTEX_POINT('',#81829); +#81829 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#81830 = VERTEX_POINT('',#81831); +#81831 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#81832 = LINE('',#81833,#81834); +#81833 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#81834 = VECTOR('',#81835,1.); +#81835 = DIRECTION('',(-1.,0.,-1.233581138472E-16)); +#81836 = ORIENTED_EDGE('',*,*,#81837,.F.); +#81837 = EDGE_CURVE('',#81838,#81828,#81840,.T.); +#81838 = VERTEX_POINT('',#81839); +#81839 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#81840 = LINE('',#81841,#81842); +#81841 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#81842 = VECTOR('',#81843,1.); +#81843 = DIRECTION('',(0.,0.,-1.)); +#81844 = ORIENTED_EDGE('',*,*,#81845,.F.); +#81845 = EDGE_CURVE('',#81846,#81838,#81848,.T.); +#81846 = VERTEX_POINT('',#81847); +#81847 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#81848 = LINE('',#81849,#81850); +#81849 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#81850 = VECTOR('',#81851,1.); +#81851 = DIRECTION('',(1.,0.,2.467162276945E-16)); +#81852 = ORIENTED_EDGE('',*,*,#81853,.F.); +#81853 = EDGE_CURVE('',#81830,#81846,#81854,.T.); +#81854 = LINE('',#81855,#81856); +#81855 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#81856 = VECTOR('',#81857,1.); +#81857 = DIRECTION('',(0.,0.,1.)); +#81858 = PLANE('',#81859); +#81859 = AXIS2_PLACEMENT_3D('',#81860,#81861,#81862); +#81860 = CARTESIAN_POINT('',(-2.5,-4.6,13.8)); +#81861 = DIRECTION('',(-0.,1.,0.)); +#81862 = DIRECTION('',(0.,0.,-1.)); +#81863 = ADVANCED_FACE('',(#81864),#81882,.F.); +#81864 = FACE_BOUND('',#81865,.F.); +#81865 = EDGE_LOOP('',(#81866,#81874,#81880,#81881)); +#81866 = ORIENTED_EDGE('',*,*,#81867,.T.); +#81867 = EDGE_CURVE('',#81404,#81868,#81870,.T.); +#81868 = VERTEX_POINT('',#81869); +#81869 = CARTESIAN_POINT('',(-3.24,-4.06,7.)); +#81870 = LINE('',#81871,#81872); +#81871 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81872 = VECTOR('',#81873,1.); +#81873 = DIRECTION('',(0.,0.,1.)); +#81874 = ORIENTED_EDGE('',*,*,#81875,.T.); +#81875 = EDGE_CURVE('',#81868,#81621,#81876,.T.); +#81876 = LINE('',#81877,#81878); +#81877 = CARTESIAN_POINT('',(-3.24,-4.06,7.)); +#81878 = VECTOR('',#81879,1.); +#81879 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81880 = ORIENTED_EDGE('',*,*,#81620,.F.); +#81881 = ORIENTED_EDGE('',*,*,#81411,.F.); +#81882 = PLANE('',#81883); +#81883 = AXIS2_PLACEMENT_3D('',#81884,#81885,#81886); +#81884 = CARTESIAN_POINT('',(-3.24,-4.06,0.)); +#81885 = DIRECTION('',(-0.296805080179,0.954938084056,0.)); +#81886 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81887 = ADVANCED_FACE('',(#81888),#81953,.T.); +#81888 = FACE_BOUND('',#81889,.T.); +#81889 = EDGE_LOOP('',(#81890,#81900,#81906,#81907,#81908,#81916,#81924, + #81930,#81931,#81939,#81947)); +#81890 = ORIENTED_EDGE('',*,*,#81891,.T.); +#81891 = EDGE_CURVE('',#81892,#81894,#81896,.T.); +#81892 = VERTEX_POINT('',#81893); +#81893 = CARTESIAN_POINT('',(22.5,-2.6,13.8)); +#81894 = VERTEX_POINT('',#81895); +#81895 = CARTESIAN_POINT('',(22.5,-4.1,7.4)); +#81896 = LINE('',#81897,#81898); +#81897 = CARTESIAN_POINT('',(22.5,-2.6,13.8)); +#81898 = VECTOR('',#81899,1.); +#81899 = DIRECTION('',(0.,-0.228191322789,-0.973616310568)); +#81900 = ORIENTED_EDGE('',*,*,#81901,.T.); +#81901 = EDGE_CURVE('',#81894,#81675,#81902,.T.); +#81902 = LINE('',#81903,#81904); +#81903 = CARTESIAN_POINT('',(22.5,-4.1,7.4)); +#81904 = VECTOR('',#81905,1.); +#81905 = DIRECTION('',(0.,-1.,0.)); +#81906 = ORIENTED_EDGE('',*,*,#81682,.T.); +#81907 = ORIENTED_EDGE('',*,*,#81339,.T.); +#81908 = ORIENTED_EDGE('',*,*,#81909,.T.); +#81909 = EDGE_CURVE('',#81340,#81910,#81912,.T.); +#81910 = VERTEX_POINT('',#81911); +#81911 = CARTESIAN_POINT('',(22.5,-3.83,7.)); +#81912 = LINE('',#81913,#81914); +#81913 = CARTESIAN_POINT('',(22.5,-3.83,0.)); +#81914 = VECTOR('',#81915,1.); +#81915 = DIRECTION('',(0.,0.,1.)); +#81916 = ORIENTED_EDGE('',*,*,#81917,.T.); +#81917 = EDGE_CURVE('',#81910,#81918,#81920,.T.); +#81918 = VERTEX_POINT('',#81919); +#81919 = CARTESIAN_POINT('',(22.5,-3.37,7.)); +#81920 = LINE('',#81921,#81922); +#81921 = CARTESIAN_POINT('',(22.5,-3.83,7.)); +#81922 = VECTOR('',#81923,1.); +#81923 = DIRECTION('',(0.,1.,0.)); +#81924 = ORIENTED_EDGE('',*,*,#81925,.F.); +#81925 = EDGE_CURVE('',#81364,#81918,#81926,.T.); +#81926 = LINE('',#81927,#81928); +#81927 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#81928 = VECTOR('',#81929,1.); +#81929 = DIRECTION('',(0.,0.,1.)); +#81930 = ORIENTED_EDGE('',*,*,#81371,.T.); +#81931 = ORIENTED_EDGE('',*,*,#81932,.T.); +#81932 = EDGE_CURVE('',#81372,#81933,#81935,.T.); +#81933 = VERTEX_POINT('',#81934); +#81934 = CARTESIAN_POINT('',(22.5,5.2,4.57)); +#81935 = LINE('',#81936,#81937); +#81936 = CARTESIAN_POINT('',(22.5,5.2,0.)); +#81937 = VECTOR('',#81938,1.); +#81938 = DIRECTION('',(0.,0.,1.)); +#81939 = ORIENTED_EDGE('',*,*,#81940,.F.); +#81940 = EDGE_CURVE('',#81941,#81933,#81943,.T.); +#81941 = VERTEX_POINT('',#81942); +#81942 = CARTESIAN_POINT('',(22.5,2.2,13.8)); +#81943 = LINE('',#81944,#81945); +#81944 = CARTESIAN_POINT('',(22.5,2.2,13.8)); +#81945 = VECTOR('',#81946,1.); +#81946 = DIRECTION('',(0.,0.309109370483,-0.951026496518)); +#81947 = ORIENTED_EDGE('',*,*,#81948,.T.); +#81948 = EDGE_CURVE('',#81941,#81892,#81949,.T.); +#81949 = LINE('',#81950,#81951); +#81950 = CARTESIAN_POINT('',(22.5,5.2,13.8)); +#81951 = VECTOR('',#81952,1.); +#81952 = DIRECTION('',(0.,-1.,0.)); +#81953 = PLANE('',#81954); +#81954 = AXIS2_PLACEMENT_3D('',#81955,#81956,#81957); +#81955 = CARTESIAN_POINT('',(22.5,0.3,6.9)); +#81956 = DIRECTION('',(1.,0.,0.)); +#81957 = DIRECTION('',(-0.,0.,1.)); +#81958 = ADVANCED_FACE('',(#81959),#81977,.F.); +#81959 = FACE_BOUND('',#81960,.F.); +#81960 = EDGE_LOOP('',(#81961,#81969,#81975,#81976)); +#81961 = ORIENTED_EDGE('',*,*,#81962,.T.); +#81962 = EDGE_CURVE('',#81396,#81963,#81965,.T.); +#81963 = VERTEX_POINT('',#81964); +#81964 = CARTESIAN_POINT('',(-3.24,-3.14,7.)); +#81965 = LINE('',#81966,#81967); +#81966 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81967 = VECTOR('',#81968,1.); +#81968 = DIRECTION('',(0.,0.,1.)); +#81969 = ORIENTED_EDGE('',*,*,#81970,.T.); +#81970 = EDGE_CURVE('',#81963,#81868,#81971,.T.); +#81971 = LINE('',#81972,#81973); +#81972 = CARTESIAN_POINT('',(-3.24,-3.14,7.)); +#81973 = VECTOR('',#81974,1.); +#81974 = DIRECTION('',(0.,-1.,0.)); +#81975 = ORIENTED_EDGE('',*,*,#81867,.F.); +#81976 = ORIENTED_EDGE('',*,*,#81403,.F.); +#81977 = PLANE('',#81978); +#81978 = AXIS2_PLACEMENT_3D('',#81979,#81980,#81981); +#81979 = CARTESIAN_POINT('',(-3.24,-3.14,0.)); +#81980 = DIRECTION('',(1.,0.,-0.)); +#81981 = DIRECTION('',(0.,-1.,0.)); +#81982 = ADVANCED_FACE('',(#81983),#82001,.T.); +#81983 = FACE_BOUND('',#81984,.T.); +#81984 = EDGE_LOOP('',(#81985,#81993,#81999,#82000)); +#81985 = ORIENTED_EDGE('',*,*,#81986,.T.); +#81986 = EDGE_CURVE('',#81348,#81987,#81989,.T.); +#81987 = VERTEX_POINT('',#81988); +#81988 = CARTESIAN_POINT('',(21.76,-4.06,7.)); +#81989 = LINE('',#81990,#81991); +#81990 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#81991 = VECTOR('',#81992,1.); +#81992 = DIRECTION('',(0.,0.,1.)); +#81993 = ORIENTED_EDGE('',*,*,#81994,.T.); +#81994 = EDGE_CURVE('',#81987,#81910,#81995,.T.); +#81995 = LINE('',#81996,#81997); +#81996 = CARTESIAN_POINT('',(21.76,-4.06,7.)); +#81997 = VECTOR('',#81998,1.); +#81998 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#81999 = ORIENTED_EDGE('',*,*,#81909,.F.); +#82000 = ORIENTED_EDGE('',*,*,#81347,.F.); +#82001 = PLANE('',#82002); +#82002 = AXIS2_PLACEMENT_3D('',#82003,#82004,#82005); +#82003 = CARTESIAN_POINT('',(21.76,-4.06,0.)); +#82004 = DIRECTION('',(-0.296805080179,0.954938084056,0.)); +#82005 = DIRECTION('',(0.954938084056,0.296805080179,0.)); +#82006 = ADVANCED_FACE('',(#82007),#82018,.F.); +#82007 = FACE_BOUND('',#82008,.F.); +#82008 = EDGE_LOOP('',(#82009,#82010,#82016,#82017)); +#82009 = ORIENTED_EDGE('',*,*,#81636,.T.); +#82010 = ORIENTED_EDGE('',*,*,#82011,.T.); +#82011 = EDGE_CURVE('',#81629,#81963,#82012,.T.); +#82012 = LINE('',#82013,#82014); +#82013 = CARTESIAN_POINT('',(-2.5,-3.37,7.)); +#82014 = VECTOR('',#82015,1.); +#82015 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82016 = ORIENTED_EDGE('',*,*,#81962,.F.); +#82017 = ORIENTED_EDGE('',*,*,#81395,.F.); +#82018 = PLANE('',#82019); +#82019 = AXIS2_PLACEMENT_3D('',#82020,#82021,#82022); +#82020 = CARTESIAN_POINT('',(-2.5,-3.37,0.)); +#82021 = DIRECTION('',(-0.296805080179,-0.954938084056,0.)); +#82022 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82023 = ADVANCED_FACE('',(#82024),#82042,.T.); +#82024 = FACE_BOUND('',#82025,.T.); +#82025 = EDGE_LOOP('',(#82026,#82034,#82040,#82041)); +#82026 = ORIENTED_EDGE('',*,*,#82027,.T.); +#82027 = EDGE_CURVE('',#81356,#82028,#82030,.T.); +#82028 = VERTEX_POINT('',#82029); +#82029 = CARTESIAN_POINT('',(21.76,-3.14,7.)); +#82030 = LINE('',#82031,#82032); +#82031 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#82032 = VECTOR('',#82033,1.); +#82033 = DIRECTION('',(0.,0.,1.)); +#82034 = ORIENTED_EDGE('',*,*,#82035,.T.); +#82035 = EDGE_CURVE('',#82028,#81987,#82036,.T.); +#82036 = LINE('',#82037,#82038); +#82037 = CARTESIAN_POINT('',(21.76,-3.14,7.)); +#82038 = VECTOR('',#82039,1.); +#82039 = DIRECTION('',(0.,-1.,0.)); +#82040 = ORIENTED_EDGE('',*,*,#81986,.F.); +#82041 = ORIENTED_EDGE('',*,*,#81355,.F.); +#82042 = PLANE('',#82043); +#82043 = AXIS2_PLACEMENT_3D('',#82044,#82045,#82046); +#82044 = CARTESIAN_POINT('',(21.76,-3.14,0.)); +#82045 = DIRECTION('',(1.,0.,-0.)); +#82046 = DIRECTION('',(0.,-1.,0.)); +#82047 = ADVANCED_FACE('',(#82048),#82059,.T.); +#82048 = FACE_BOUND('',#82049,.T.); +#82049 = EDGE_LOOP('',(#82050,#82051,#82057,#82058)); +#82050 = ORIENTED_EDGE('',*,*,#81925,.T.); +#82051 = ORIENTED_EDGE('',*,*,#82052,.T.); +#82052 = EDGE_CURVE('',#81918,#82028,#82053,.T.); +#82053 = LINE('',#82054,#82055); +#82054 = CARTESIAN_POINT('',(22.5,-3.37,7.)); +#82055 = VECTOR('',#82056,1.); +#82056 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82057 = ORIENTED_EDGE('',*,*,#82027,.F.); +#82058 = ORIENTED_EDGE('',*,*,#81363,.F.); +#82059 = PLANE('',#82060); +#82060 = AXIS2_PLACEMENT_3D('',#82061,#82062,#82063); +#82061 = CARTESIAN_POINT('',(22.5,-3.37,0.)); +#82062 = DIRECTION('',(-0.296805080179,-0.954938084056,0.)); +#82063 = DIRECTION('',(-0.954938084056,0.296805080179,0.)); +#82064 = ADVANCED_FACE('',(#82065),#82076,.F.); +#82065 = FACE_BOUND('',#82066,.F.); +#82066 = EDGE_LOOP('',(#82067,#82068,#82069,#82070)); +#82067 = ORIENTED_EDGE('',*,*,#81643,.F.); +#82068 = ORIENTED_EDGE('',*,*,#81379,.T.); +#82069 = ORIENTED_EDGE('',*,*,#81932,.T.); +#82070 = ORIENTED_EDGE('',*,*,#82071,.F.); +#82071 = EDGE_CURVE('',#81644,#81933,#82072,.T.); +#82072 = LINE('',#82073,#82074); +#82073 = CARTESIAN_POINT('',(-2.5,5.2,4.57)); +#82074 = VECTOR('',#82075,1.); +#82075 = DIRECTION('',(1.,0.,0.)); +#82076 = PLANE('',#82077); +#82077 = AXIS2_PLACEMENT_3D('',#82078,#82079,#82080); +#82078 = CARTESIAN_POINT('',(-2.5,5.2,0.)); +#82079 = DIRECTION('',(0.,-1.,0.)); +#82080 = DIRECTION('',(0.,0.,1.)); +#82081 = ADVANCED_FACE('',(#82082),#82107,.T.); +#82082 = FACE_BOUND('',#82083,.T.); +#82083 = EDGE_LOOP('',(#82084,#82085,#82093,#82101)); +#82084 = ORIENTED_EDGE('',*,*,#81419,.F.); +#82085 = ORIENTED_EDGE('',*,*,#82086,.T.); +#82086 = EDGE_CURVE('',#81420,#82087,#82089,.T.); +#82087 = VERTEX_POINT('',#82088); +#82088 = CARTESIAN_POINT('',(19.55,-0.45,-3.5)); +#82089 = LINE('',#82090,#82091); +#82090 = CARTESIAN_POINT('',(19.55,-0.45,2.4)); +#82091 = VECTOR('',#82092,1.); +#82092 = DIRECTION('',(-0.,-0.,-1.)); +#82093 = ORIENTED_EDGE('',*,*,#82094,.T.); +#82094 = EDGE_CURVE('',#82087,#82095,#82097,.T.); +#82095 = VERTEX_POINT('',#82096); +#82096 = CARTESIAN_POINT('',(20.45,-0.45,-3.5)); +#82097 = LINE('',#82098,#82099); +#82098 = CARTESIAN_POINT('',(19.55,-0.45,-3.5)); +#82099 = VECTOR('',#82100,1.); +#82100 = DIRECTION('',(1.,0.,0.)); +#82101 = ORIENTED_EDGE('',*,*,#82102,.F.); +#82102 = EDGE_CURVE('',#81422,#82095,#82103,.T.); +#82103 = LINE('',#82104,#82105); +#82104 = CARTESIAN_POINT('',(20.45,-0.45,2.4)); +#82105 = VECTOR('',#82106,1.); +#82106 = DIRECTION('',(-0.,-0.,-1.)); +#82107 = PLANE('',#82108); +#82108 = AXIS2_PLACEMENT_3D('',#82109,#82110,#82111); +#82109 = CARTESIAN_POINT('',(19.55,-0.45,2.4)); +#82110 = DIRECTION('',(0.,-1.,0.)); +#82111 = DIRECTION('',(1.,0.,0.)); +#82112 = ADVANCED_FACE('',(#82113),#82131,.T.); +#82113 = FACE_BOUND('',#82114,.T.); +#82114 = EDGE_LOOP('',(#82115,#82116,#82117,#82125)); +#82115 = ORIENTED_EDGE('',*,*,#81445,.F.); +#82116 = ORIENTED_EDGE('',*,*,#82102,.T.); +#82117 = ORIENTED_EDGE('',*,*,#82118,.T.); +#82118 = EDGE_CURVE('',#82095,#82119,#82121,.T.); +#82119 = VERTEX_POINT('',#82120); +#82120 = CARTESIAN_POINT('',(20.45,0.45,-3.5)); +#82121 = LINE('',#82122,#82123); +#82122 = CARTESIAN_POINT('',(20.45,-0.45,-3.5)); +#82123 = VECTOR('',#82124,1.); +#82124 = DIRECTION('',(0.,1.,0.)); +#82125 = ORIENTED_EDGE('',*,*,#82126,.F.); +#82126 = EDGE_CURVE('',#81438,#82119,#82127,.T.); +#82127 = LINE('',#82128,#82129); +#82128 = CARTESIAN_POINT('',(20.45,0.45,2.4)); +#82129 = VECTOR('',#82130,1.); +#82130 = DIRECTION('',(-0.,-0.,-1.)); +#82131 = PLANE('',#82132); +#82132 = AXIS2_PLACEMENT_3D('',#82133,#82134,#82135); +#82133 = CARTESIAN_POINT('',(20.45,-0.45,2.4)); +#82134 = DIRECTION('',(1.,0.,0.)); +#82135 = DIRECTION('',(-0.,1.,0.)); +#82136 = ADVANCED_FACE('',(#82137),#82155,.T.); +#82137 = FACE_BOUND('',#82138,.T.); +#82138 = EDGE_LOOP('',(#82139,#82140,#82141,#82149)); +#82139 = ORIENTED_EDGE('',*,*,#81437,.F.); +#82140 = ORIENTED_EDGE('',*,*,#82126,.T.); +#82141 = ORIENTED_EDGE('',*,*,#82142,.T.); +#82142 = EDGE_CURVE('',#82119,#82143,#82145,.T.); +#82143 = VERTEX_POINT('',#82144); +#82144 = CARTESIAN_POINT('',(19.55,0.45,-3.5)); +#82145 = LINE('',#82146,#82147); +#82146 = CARTESIAN_POINT('',(20.45,0.45,-3.5)); +#82147 = VECTOR('',#82148,1.); +#82148 = DIRECTION('',(-1.,0.,0.)); +#82149 = ORIENTED_EDGE('',*,*,#82150,.F.); +#82150 = EDGE_CURVE('',#81430,#82143,#82151,.T.); +#82151 = LINE('',#82152,#82153); +#82152 = CARTESIAN_POINT('',(19.55,0.45,2.4)); +#82153 = VECTOR('',#82154,1.); +#82154 = DIRECTION('',(-0.,-0.,-1.)); +#82155 = PLANE('',#82156); +#82156 = AXIS2_PLACEMENT_3D('',#82157,#82158,#82159); +#82157 = CARTESIAN_POINT('',(20.45,0.45,2.4)); +#82158 = DIRECTION('',(0.,1.,-0.)); +#82159 = DIRECTION('',(-1.,0.,0.)); +#82160 = ADVANCED_FACE('',(#82161),#82172,.T.); +#82161 = FACE_BOUND('',#82162,.T.); +#82162 = EDGE_LOOP('',(#82163,#82164,#82165,#82171)); +#82163 = ORIENTED_EDGE('',*,*,#81429,.F.); +#82164 = ORIENTED_EDGE('',*,*,#82150,.T.); +#82165 = ORIENTED_EDGE('',*,*,#82166,.T.); +#82166 = EDGE_CURVE('',#82143,#82087,#82167,.T.); +#82167 = LINE('',#82168,#82169); +#82168 = CARTESIAN_POINT('',(19.55,0.45,-3.5)); +#82169 = VECTOR('',#82170,1.); +#82170 = DIRECTION('',(0.,-1.,0.)); +#82171 = ORIENTED_EDGE('',*,*,#82086,.F.); +#82172 = PLANE('',#82173); +#82173 = AXIS2_PLACEMENT_3D('',#82174,#82175,#82176); +#82174 = CARTESIAN_POINT('',(19.55,0.45,2.4)); +#82175 = DIRECTION('',(-1.,0.,0.)); +#82176 = DIRECTION('',(0.,-1.,0.)); +#82177 = ADVANCED_FACE('',(#82178),#82203,.T.); +#82178 = FACE_BOUND('',#82179,.T.); +#82179 = EDGE_LOOP('',(#82180,#82181,#82189,#82197)); +#82180 = ORIENTED_EDGE('',*,*,#81453,.F.); +#82181 = ORIENTED_EDGE('',*,*,#82182,.T.); +#82182 = EDGE_CURVE('',#81454,#82183,#82185,.T.); +#82183 = VERTEX_POINT('',#82184); +#82184 = CARTESIAN_POINT('',(14.55,-0.45,-3.5)); +#82185 = LINE('',#82186,#82187); +#82186 = CARTESIAN_POINT('',(14.55,-0.45,2.4)); +#82187 = VECTOR('',#82188,1.); +#82188 = DIRECTION('',(-0.,-0.,-1.)); +#82189 = ORIENTED_EDGE('',*,*,#82190,.T.); +#82190 = EDGE_CURVE('',#82183,#82191,#82193,.T.); +#82191 = VERTEX_POINT('',#82192); +#82192 = CARTESIAN_POINT('',(15.45,-0.45,-3.5)); +#82193 = LINE('',#82194,#82195); +#82194 = CARTESIAN_POINT('',(14.55,-0.45,-3.5)); +#82195 = VECTOR('',#82196,1.); +#82196 = DIRECTION('',(1.,0.,0.)); +#82197 = ORIENTED_EDGE('',*,*,#82198,.F.); +#82198 = EDGE_CURVE('',#81456,#82191,#82199,.T.); +#82199 = LINE('',#82200,#82201); +#82200 = CARTESIAN_POINT('',(15.45,-0.45,2.4)); +#82201 = VECTOR('',#82202,1.); +#82202 = DIRECTION('',(-0.,-0.,-1.)); +#82203 = PLANE('',#82204); +#82204 = AXIS2_PLACEMENT_3D('',#82205,#82206,#82207); +#82205 = CARTESIAN_POINT('',(14.55,-0.45,2.4)); +#82206 = DIRECTION('',(0.,-1.,0.)); +#82207 = DIRECTION('',(1.,0.,0.)); +#82208 = ADVANCED_FACE('',(#82209),#82227,.T.); +#82209 = FACE_BOUND('',#82210,.T.); +#82210 = EDGE_LOOP('',(#82211,#82212,#82213,#82221)); +#82211 = ORIENTED_EDGE('',*,*,#81479,.F.); +#82212 = ORIENTED_EDGE('',*,*,#82198,.T.); +#82213 = ORIENTED_EDGE('',*,*,#82214,.T.); +#82214 = EDGE_CURVE('',#82191,#82215,#82217,.T.); +#82215 = VERTEX_POINT('',#82216); +#82216 = CARTESIAN_POINT('',(15.45,0.45,-3.5)); +#82217 = LINE('',#82218,#82219); +#82218 = CARTESIAN_POINT('',(15.45,-0.45,-3.5)); +#82219 = VECTOR('',#82220,1.); +#82220 = DIRECTION('',(0.,1.,0.)); +#82221 = ORIENTED_EDGE('',*,*,#82222,.F.); +#82222 = EDGE_CURVE('',#81472,#82215,#82223,.T.); +#82223 = LINE('',#82224,#82225); +#82224 = CARTESIAN_POINT('',(15.45,0.45,2.4)); +#82225 = VECTOR('',#82226,1.); +#82226 = DIRECTION('',(-0.,-0.,-1.)); +#82227 = PLANE('',#82228); +#82228 = AXIS2_PLACEMENT_3D('',#82229,#82230,#82231); +#82229 = CARTESIAN_POINT('',(15.45,-0.45,2.4)); +#82230 = DIRECTION('',(1.,0.,0.)); +#82231 = DIRECTION('',(-0.,1.,0.)); +#82232 = ADVANCED_FACE('',(#82233),#82251,.T.); +#82233 = FACE_BOUND('',#82234,.T.); +#82234 = EDGE_LOOP('',(#82235,#82236,#82237,#82245)); +#82235 = ORIENTED_EDGE('',*,*,#81471,.F.); +#82236 = ORIENTED_EDGE('',*,*,#82222,.T.); +#82237 = ORIENTED_EDGE('',*,*,#82238,.T.); +#82238 = EDGE_CURVE('',#82215,#82239,#82241,.T.); +#82239 = VERTEX_POINT('',#82240); +#82240 = CARTESIAN_POINT('',(14.55,0.45,-3.5)); +#82241 = LINE('',#82242,#82243); +#82242 = CARTESIAN_POINT('',(15.45,0.45,-3.5)); +#82243 = VECTOR('',#82244,1.); +#82244 = DIRECTION('',(-1.,0.,0.)); +#82245 = ORIENTED_EDGE('',*,*,#82246,.F.); +#82246 = EDGE_CURVE('',#81464,#82239,#82247,.T.); +#82247 = LINE('',#82248,#82249); +#82248 = CARTESIAN_POINT('',(14.55,0.45,2.4)); +#82249 = VECTOR('',#82250,1.); +#82250 = DIRECTION('',(-0.,-0.,-1.)); +#82251 = PLANE('',#82252); +#82252 = AXIS2_PLACEMENT_3D('',#82253,#82254,#82255); +#82253 = CARTESIAN_POINT('',(15.45,0.45,2.4)); +#82254 = DIRECTION('',(0.,1.,-0.)); +#82255 = DIRECTION('',(-1.,0.,0.)); +#82256 = ADVANCED_FACE('',(#82257),#82268,.T.); +#82257 = FACE_BOUND('',#82258,.T.); +#82258 = EDGE_LOOP('',(#82259,#82260,#82261,#82267)); +#82259 = ORIENTED_EDGE('',*,*,#81463,.F.); +#82260 = ORIENTED_EDGE('',*,*,#82246,.T.); +#82261 = ORIENTED_EDGE('',*,*,#82262,.T.); +#82262 = EDGE_CURVE('',#82239,#82183,#82263,.T.); +#82263 = LINE('',#82264,#82265); +#82264 = CARTESIAN_POINT('',(14.55,0.45,-3.5)); +#82265 = VECTOR('',#82266,1.); +#82266 = DIRECTION('',(0.,-1.,0.)); +#82267 = ORIENTED_EDGE('',*,*,#82182,.F.); +#82268 = PLANE('',#82269); +#82269 = AXIS2_PLACEMENT_3D('',#82270,#82271,#82272); +#82270 = CARTESIAN_POINT('',(14.55,0.45,2.4)); +#82271 = DIRECTION('',(-1.,0.,0.)); +#82272 = DIRECTION('',(0.,-1.,0.)); +#82273 = ADVANCED_FACE('',(#82274),#82299,.T.); +#82274 = FACE_BOUND('',#82275,.T.); +#82275 = EDGE_LOOP('',(#82276,#82277,#82285,#82293)); +#82276 = ORIENTED_EDGE('',*,*,#81487,.F.); +#82277 = ORIENTED_EDGE('',*,*,#82278,.T.); +#82278 = EDGE_CURVE('',#81488,#82279,#82281,.T.); +#82279 = VERTEX_POINT('',#82280); +#82280 = CARTESIAN_POINT('',(9.55,-0.45,-3.5)); +#82281 = LINE('',#82282,#82283); +#82282 = CARTESIAN_POINT('',(9.55,-0.45,2.4)); +#82283 = VECTOR('',#82284,1.); +#82284 = DIRECTION('',(-0.,-0.,-1.)); +#82285 = ORIENTED_EDGE('',*,*,#82286,.T.); +#82286 = EDGE_CURVE('',#82279,#82287,#82289,.T.); +#82287 = VERTEX_POINT('',#82288); +#82288 = CARTESIAN_POINT('',(10.45,-0.45,-3.5)); +#82289 = LINE('',#82290,#82291); +#82290 = CARTESIAN_POINT('',(9.55,-0.45,-3.5)); +#82291 = VECTOR('',#82292,1.); +#82292 = DIRECTION('',(1.,0.,0.)); +#82293 = ORIENTED_EDGE('',*,*,#82294,.F.); +#82294 = EDGE_CURVE('',#81490,#82287,#82295,.T.); +#82295 = LINE('',#82296,#82297); +#82296 = CARTESIAN_POINT('',(10.45,-0.45,2.4)); +#82297 = VECTOR('',#82298,1.); +#82298 = DIRECTION('',(-0.,-0.,-1.)); +#82299 = PLANE('',#82300); +#82300 = AXIS2_PLACEMENT_3D('',#82301,#82302,#82303); +#82301 = CARTESIAN_POINT('',(9.55,-0.45,2.4)); +#82302 = DIRECTION('',(0.,-1.,0.)); +#82303 = DIRECTION('',(1.,0.,0.)); +#82304 = ADVANCED_FACE('',(#82305),#82323,.T.); +#82305 = FACE_BOUND('',#82306,.T.); +#82306 = EDGE_LOOP('',(#82307,#82308,#82309,#82317)); +#82307 = ORIENTED_EDGE('',*,*,#81513,.F.); +#82308 = ORIENTED_EDGE('',*,*,#82294,.T.); +#82309 = ORIENTED_EDGE('',*,*,#82310,.T.); +#82310 = EDGE_CURVE('',#82287,#82311,#82313,.T.); +#82311 = VERTEX_POINT('',#82312); +#82312 = CARTESIAN_POINT('',(10.45,0.45,-3.5)); +#82313 = LINE('',#82314,#82315); +#82314 = CARTESIAN_POINT('',(10.45,-0.45,-3.5)); +#82315 = VECTOR('',#82316,1.); +#82316 = DIRECTION('',(0.,1.,0.)); +#82317 = ORIENTED_EDGE('',*,*,#82318,.F.); +#82318 = EDGE_CURVE('',#81506,#82311,#82319,.T.); +#82319 = LINE('',#82320,#82321); +#82320 = CARTESIAN_POINT('',(10.45,0.45,2.4)); +#82321 = VECTOR('',#82322,1.); +#82322 = DIRECTION('',(-0.,-0.,-1.)); +#82323 = PLANE('',#82324); +#82324 = AXIS2_PLACEMENT_3D('',#82325,#82326,#82327); +#82325 = CARTESIAN_POINT('',(10.45,-0.45,2.4)); +#82326 = DIRECTION('',(1.,0.,0.)); +#82327 = DIRECTION('',(-0.,1.,0.)); +#82328 = ADVANCED_FACE('',(#82329),#82347,.T.); +#82329 = FACE_BOUND('',#82330,.T.); +#82330 = EDGE_LOOP('',(#82331,#82332,#82333,#82341)); +#82331 = ORIENTED_EDGE('',*,*,#81505,.F.); +#82332 = ORIENTED_EDGE('',*,*,#82318,.T.); +#82333 = ORIENTED_EDGE('',*,*,#82334,.T.); +#82334 = EDGE_CURVE('',#82311,#82335,#82337,.T.); +#82335 = VERTEX_POINT('',#82336); +#82336 = CARTESIAN_POINT('',(9.55,0.45,-3.5)); +#82337 = LINE('',#82338,#82339); +#82338 = CARTESIAN_POINT('',(10.45,0.45,-3.5)); +#82339 = VECTOR('',#82340,1.); +#82340 = DIRECTION('',(-1.,0.,0.)); +#82341 = ORIENTED_EDGE('',*,*,#82342,.F.); +#82342 = EDGE_CURVE('',#81498,#82335,#82343,.T.); +#82343 = LINE('',#82344,#82345); +#82344 = CARTESIAN_POINT('',(9.55,0.45,2.4)); +#82345 = VECTOR('',#82346,1.); +#82346 = DIRECTION('',(-0.,-0.,-1.)); +#82347 = PLANE('',#82348); +#82348 = AXIS2_PLACEMENT_3D('',#82349,#82350,#82351); +#82349 = CARTESIAN_POINT('',(10.45,0.45,2.4)); +#82350 = DIRECTION('',(0.,1.,-0.)); +#82351 = DIRECTION('',(-1.,0.,0.)); +#82352 = ADVANCED_FACE('',(#82353),#82364,.T.); +#82353 = FACE_BOUND('',#82354,.T.); +#82354 = EDGE_LOOP('',(#82355,#82356,#82357,#82363)); +#82355 = ORIENTED_EDGE('',*,*,#81497,.F.); +#82356 = ORIENTED_EDGE('',*,*,#82342,.T.); +#82357 = ORIENTED_EDGE('',*,*,#82358,.T.); +#82358 = EDGE_CURVE('',#82335,#82279,#82359,.T.); +#82359 = LINE('',#82360,#82361); +#82360 = CARTESIAN_POINT('',(9.55,0.45,-3.5)); +#82361 = VECTOR('',#82362,1.); +#82362 = DIRECTION('',(0.,-1.,0.)); +#82363 = ORIENTED_EDGE('',*,*,#82278,.F.); +#82364 = PLANE('',#82365); +#82365 = AXIS2_PLACEMENT_3D('',#82366,#82367,#82368); +#82366 = CARTESIAN_POINT('',(9.55,0.45,2.4)); +#82367 = DIRECTION('',(-1.,0.,0.)); +#82368 = DIRECTION('',(0.,-1.,0.)); +#82369 = ADVANCED_FACE('',(#82370),#82395,.T.); +#82370 = FACE_BOUND('',#82371,.T.); +#82371 = EDGE_LOOP('',(#82372,#82373,#82381,#82389)); +#82372 = ORIENTED_EDGE('',*,*,#81521,.F.); +#82373 = ORIENTED_EDGE('',*,*,#82374,.T.); +#82374 = EDGE_CURVE('',#81522,#82375,#82377,.T.); +#82375 = VERTEX_POINT('',#82376); +#82376 = CARTESIAN_POINT('',(4.55,-0.45,-3.5)); +#82377 = LINE('',#82378,#82379); +#82378 = CARTESIAN_POINT('',(4.55,-0.45,2.4)); +#82379 = VECTOR('',#82380,1.); +#82380 = DIRECTION('',(-0.,-0.,-1.)); +#82381 = ORIENTED_EDGE('',*,*,#82382,.T.); +#82382 = EDGE_CURVE('',#82375,#82383,#82385,.T.); +#82383 = VERTEX_POINT('',#82384); +#82384 = CARTESIAN_POINT('',(5.45,-0.45,-3.5)); +#82385 = LINE('',#82386,#82387); +#82386 = CARTESIAN_POINT('',(4.55,-0.45,-3.5)); +#82387 = VECTOR('',#82388,1.); +#82388 = DIRECTION('',(1.,0.,0.)); +#82389 = ORIENTED_EDGE('',*,*,#82390,.F.); +#82390 = EDGE_CURVE('',#81524,#82383,#82391,.T.); +#82391 = LINE('',#82392,#82393); +#82392 = CARTESIAN_POINT('',(5.45,-0.45,2.4)); +#82393 = VECTOR('',#82394,1.); +#82394 = DIRECTION('',(-0.,-0.,-1.)); +#82395 = PLANE('',#82396); +#82396 = AXIS2_PLACEMENT_3D('',#82397,#82398,#82399); +#82397 = CARTESIAN_POINT('',(4.55,-0.45,2.4)); +#82398 = DIRECTION('',(0.,-1.,0.)); +#82399 = DIRECTION('',(1.,0.,0.)); +#82400 = ADVANCED_FACE('',(#82401),#82419,.T.); +#82401 = FACE_BOUND('',#82402,.T.); +#82402 = EDGE_LOOP('',(#82403,#82404,#82405,#82413)); +#82403 = ORIENTED_EDGE('',*,*,#81547,.F.); +#82404 = ORIENTED_EDGE('',*,*,#82390,.T.); +#82405 = ORIENTED_EDGE('',*,*,#82406,.T.); +#82406 = EDGE_CURVE('',#82383,#82407,#82409,.T.); +#82407 = VERTEX_POINT('',#82408); +#82408 = CARTESIAN_POINT('',(5.45,0.45,-3.5)); +#82409 = LINE('',#82410,#82411); +#82410 = CARTESIAN_POINT('',(5.45,-0.45,-3.5)); +#82411 = VECTOR('',#82412,1.); +#82412 = DIRECTION('',(0.,1.,0.)); +#82413 = ORIENTED_EDGE('',*,*,#82414,.F.); +#82414 = EDGE_CURVE('',#81540,#82407,#82415,.T.); +#82415 = LINE('',#82416,#82417); +#82416 = CARTESIAN_POINT('',(5.45,0.45,2.4)); +#82417 = VECTOR('',#82418,1.); +#82418 = DIRECTION('',(-0.,-0.,-1.)); +#82419 = PLANE('',#82420); +#82420 = AXIS2_PLACEMENT_3D('',#82421,#82422,#82423); +#82421 = CARTESIAN_POINT('',(5.45,-0.45,2.4)); +#82422 = DIRECTION('',(1.,0.,0.)); +#82423 = DIRECTION('',(-0.,1.,0.)); +#82424 = ADVANCED_FACE('',(#82425),#82443,.T.); +#82425 = FACE_BOUND('',#82426,.T.); +#82426 = EDGE_LOOP('',(#82427,#82428,#82429,#82437)); +#82427 = ORIENTED_EDGE('',*,*,#81539,.F.); +#82428 = ORIENTED_EDGE('',*,*,#82414,.T.); +#82429 = ORIENTED_EDGE('',*,*,#82430,.T.); +#82430 = EDGE_CURVE('',#82407,#82431,#82433,.T.); +#82431 = VERTEX_POINT('',#82432); +#82432 = CARTESIAN_POINT('',(4.55,0.45,-3.5)); +#82433 = LINE('',#82434,#82435); +#82434 = CARTESIAN_POINT('',(5.45,0.45,-3.5)); +#82435 = VECTOR('',#82436,1.); +#82436 = DIRECTION('',(-1.,0.,0.)); +#82437 = ORIENTED_EDGE('',*,*,#82438,.F.); +#82438 = EDGE_CURVE('',#81532,#82431,#82439,.T.); +#82439 = LINE('',#82440,#82441); +#82440 = CARTESIAN_POINT('',(4.55,0.45,2.4)); +#82441 = VECTOR('',#82442,1.); +#82442 = DIRECTION('',(-0.,-0.,-1.)); +#82443 = PLANE('',#82444); +#82444 = AXIS2_PLACEMENT_3D('',#82445,#82446,#82447); +#82445 = CARTESIAN_POINT('',(5.45,0.45,2.4)); +#82446 = DIRECTION('',(0.,1.,-0.)); +#82447 = DIRECTION('',(-1.,0.,0.)); +#82448 = ADVANCED_FACE('',(#82449),#82460,.T.); +#82449 = FACE_BOUND('',#82450,.T.); +#82450 = EDGE_LOOP('',(#82451,#82452,#82453,#82459)); +#82451 = ORIENTED_EDGE('',*,*,#81531,.F.); +#82452 = ORIENTED_EDGE('',*,*,#82438,.T.); +#82453 = ORIENTED_EDGE('',*,*,#82454,.T.); +#82454 = EDGE_CURVE('',#82431,#82375,#82455,.T.); +#82455 = LINE('',#82456,#82457); +#82456 = CARTESIAN_POINT('',(4.55,0.45,-3.5)); +#82457 = VECTOR('',#82458,1.); +#82458 = DIRECTION('',(0.,-1.,0.)); +#82459 = ORIENTED_EDGE('',*,*,#82374,.F.); +#82460 = PLANE('',#82461); +#82461 = AXIS2_PLACEMENT_3D('',#82462,#82463,#82464); +#82462 = CARTESIAN_POINT('',(4.55,0.45,2.4)); +#82463 = DIRECTION('',(-1.,0.,0.)); +#82464 = DIRECTION('',(0.,-1.,0.)); +#82465 = ADVANCED_FACE('',(#82466),#82491,.T.); +#82466 = FACE_BOUND('',#82467,.T.); +#82467 = EDGE_LOOP('',(#82468,#82469,#82477,#82485)); +#82468 = ORIENTED_EDGE('',*,*,#81555,.F.); +#82469 = ORIENTED_EDGE('',*,*,#82470,.T.); +#82470 = EDGE_CURVE('',#81556,#82471,#82473,.T.); +#82471 = VERTEX_POINT('',#82472); +#82472 = CARTESIAN_POINT('',(-0.45,-0.45,-3.5)); +#82473 = LINE('',#82474,#82475); +#82474 = CARTESIAN_POINT('',(-0.45,-0.45,2.4)); +#82475 = VECTOR('',#82476,1.); +#82476 = DIRECTION('',(-0.,-0.,-1.)); +#82477 = ORIENTED_EDGE('',*,*,#82478,.T.); +#82478 = EDGE_CURVE('',#82471,#82479,#82481,.T.); +#82479 = VERTEX_POINT('',#82480); +#82480 = CARTESIAN_POINT('',(0.45,-0.45,-3.5)); +#82481 = LINE('',#82482,#82483); +#82482 = CARTESIAN_POINT('',(-0.45,-0.45,-3.5)); +#82483 = VECTOR('',#82484,1.); +#82484 = DIRECTION('',(1.,0.,0.)); +#82485 = ORIENTED_EDGE('',*,*,#82486,.F.); +#82486 = EDGE_CURVE('',#81558,#82479,#82487,.T.); +#82487 = LINE('',#82488,#82489); +#82488 = CARTESIAN_POINT('',(0.45,-0.45,2.4)); +#82489 = VECTOR('',#82490,1.); +#82490 = DIRECTION('',(-0.,-0.,-1.)); +#82491 = PLANE('',#82492); +#82492 = AXIS2_PLACEMENT_3D('',#82493,#82494,#82495); +#82493 = CARTESIAN_POINT('',(-0.45,-0.45,2.4)); +#82494 = DIRECTION('',(0.,-1.,0.)); +#82495 = DIRECTION('',(1.,0.,0.)); +#82496 = ADVANCED_FACE('',(#82497),#82515,.T.); +#82497 = FACE_BOUND('',#82498,.T.); +#82498 = EDGE_LOOP('',(#82499,#82500,#82501,#82509)); +#82499 = ORIENTED_EDGE('',*,*,#81581,.F.); +#82500 = ORIENTED_EDGE('',*,*,#82486,.T.); +#82501 = ORIENTED_EDGE('',*,*,#82502,.T.); +#82502 = EDGE_CURVE('',#82479,#82503,#82505,.T.); +#82503 = VERTEX_POINT('',#82504); +#82504 = CARTESIAN_POINT('',(0.45,0.45,-3.5)); +#82505 = LINE('',#82506,#82507); +#82506 = CARTESIAN_POINT('',(0.45,-0.45,-3.5)); +#82507 = VECTOR('',#82508,1.); +#82508 = DIRECTION('',(0.,1.,0.)); +#82509 = ORIENTED_EDGE('',*,*,#82510,.F.); +#82510 = EDGE_CURVE('',#81574,#82503,#82511,.T.); +#82511 = LINE('',#82512,#82513); +#82512 = CARTESIAN_POINT('',(0.45,0.45,2.4)); +#82513 = VECTOR('',#82514,1.); +#82514 = DIRECTION('',(-0.,-0.,-1.)); +#82515 = PLANE('',#82516); +#82516 = AXIS2_PLACEMENT_3D('',#82517,#82518,#82519); +#82517 = CARTESIAN_POINT('',(0.45,-0.45,2.4)); +#82518 = DIRECTION('',(1.,0.,0.)); +#82519 = DIRECTION('',(-0.,1.,0.)); +#82520 = ADVANCED_FACE('',(#82521),#82539,.T.); +#82521 = FACE_BOUND('',#82522,.T.); +#82522 = EDGE_LOOP('',(#82523,#82524,#82525,#82533)); +#82523 = ORIENTED_EDGE('',*,*,#81573,.F.); +#82524 = ORIENTED_EDGE('',*,*,#82510,.T.); +#82525 = ORIENTED_EDGE('',*,*,#82526,.T.); +#82526 = EDGE_CURVE('',#82503,#82527,#82529,.T.); +#82527 = VERTEX_POINT('',#82528); +#82528 = CARTESIAN_POINT('',(-0.45,0.45,-3.5)); +#82529 = LINE('',#82530,#82531); +#82530 = CARTESIAN_POINT('',(0.45,0.45,-3.5)); +#82531 = VECTOR('',#82532,1.); +#82532 = DIRECTION('',(-1.,0.,0.)); +#82533 = ORIENTED_EDGE('',*,*,#82534,.F.); +#82534 = EDGE_CURVE('',#81566,#82527,#82535,.T.); +#82535 = LINE('',#82536,#82537); +#82536 = CARTESIAN_POINT('',(-0.45,0.45,2.4)); +#82537 = VECTOR('',#82538,1.); +#82538 = DIRECTION('',(-0.,-0.,-1.)); +#82539 = PLANE('',#82540); +#82540 = AXIS2_PLACEMENT_3D('',#82541,#82542,#82543); +#82541 = CARTESIAN_POINT('',(0.45,0.45,2.4)); +#82542 = DIRECTION('',(0.,1.,-0.)); +#82543 = DIRECTION('',(-1.,0.,0.)); +#82544 = ADVANCED_FACE('',(#82545),#82556,.T.); +#82545 = FACE_BOUND('',#82546,.T.); +#82546 = EDGE_LOOP('',(#82547,#82548,#82549,#82555)); +#82547 = ORIENTED_EDGE('',*,*,#81565,.F.); +#82548 = ORIENTED_EDGE('',*,*,#82534,.T.); +#82549 = ORIENTED_EDGE('',*,*,#82550,.T.); +#82550 = EDGE_CURVE('',#82527,#82471,#82551,.T.); +#82551 = LINE('',#82552,#82553); +#82552 = CARTESIAN_POINT('',(-0.45,0.45,-3.5)); +#82553 = VECTOR('',#82554,1.); +#82554 = DIRECTION('',(0.,-1.,0.)); +#82555 = ORIENTED_EDGE('',*,*,#82470,.F.); +#82556 = PLANE('',#82557); +#82557 = AXIS2_PLACEMENT_3D('',#82558,#82559,#82560); +#82558 = CARTESIAN_POINT('',(-0.45,0.45,2.4)); +#82559 = DIRECTION('',(-1.,0.,0.)); +#82560 = DIRECTION('',(0.,-1.,0.)); +#82561 = ADVANCED_FACE('',(#82562),#82578,.F.); +#82562 = FACE_BOUND('',#82563,.F.); +#82563 = EDGE_LOOP('',(#82564,#82570,#82571,#82577)); +#82564 = ORIENTED_EDGE('',*,*,#82565,.T.); +#82565 = EDGE_CURVE('',#81596,#81892,#82566,.T.); +#82566 = LINE('',#82567,#82568); +#82567 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#82568 = VECTOR('',#82569,1.); +#82569 = DIRECTION('',(1.,0.,0.)); +#82570 = ORIENTED_EDGE('',*,*,#81891,.T.); +#82571 = ORIENTED_EDGE('',*,*,#82572,.F.); +#82572 = EDGE_CURVE('',#81598,#81894,#82573,.T.); +#82573 = LINE('',#82574,#82575); +#82574 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#82575 = VECTOR('',#82576,1.); +#82576 = DIRECTION('',(1.,0.,0.)); +#82577 = ORIENTED_EDGE('',*,*,#81595,.F.); +#82578 = PLANE('',#82579); +#82579 = AXIS2_PLACEMENT_3D('',#82580,#82581,#82582); +#82580 = CARTESIAN_POINT('',(-2.5,-2.6,13.8)); +#82581 = DIRECTION('',(0.,0.973616310568,-0.228191322789)); +#82582 = DIRECTION('',(0.,-0.228191322789,-0.973616310568)); +#82583 = ADVANCED_FACE('',(#82584,#82595,#82606,#82617,#82628,#82639), + #82650,.F.); +#82584 = FACE_BOUND('',#82585,.F.); +#82585 = EDGE_LOOP('',(#82586,#82587,#82593,#82594)); +#82586 = ORIENTED_EDGE('',*,*,#81659,.F.); +#82587 = ORIENTED_EDGE('',*,*,#82588,.T.); +#82588 = EDGE_CURVE('',#81652,#81941,#82589,.T.); +#82589 = LINE('',#82590,#82591); +#82590 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#82591 = VECTOR('',#82592,1.); +#82592 = DIRECTION('',(1.,0.,0.)); +#82593 = ORIENTED_EDGE('',*,*,#81948,.T.); +#82594 = ORIENTED_EDGE('',*,*,#82565,.F.); +#82595 = FACE_BOUND('',#82596,.F.); +#82596 = EDGE_LOOP('',(#82597)); +#82597 = ORIENTED_EDGE('',*,*,#82598,.T.); +#82598 = EDGE_CURVE('',#82599,#82599,#82601,.T.); +#82599 = VERTEX_POINT('',#82600); +#82600 = CARTESIAN_POINT('',(22.,-0.2,13.8)); +#82601 = CIRCLE('',#82602,2.); +#82602 = AXIS2_PLACEMENT_3D('',#82603,#82604,#82605); +#82603 = CARTESIAN_POINT('',(20.,-0.2,13.8)); +#82604 = DIRECTION('',(0.,0.,1.)); +#82605 = DIRECTION('',(1.,0.,-0.)); +#82606 = FACE_BOUND('',#82607,.F.); +#82607 = EDGE_LOOP('',(#82608)); +#82608 = ORIENTED_EDGE('',*,*,#82609,.T.); +#82609 = EDGE_CURVE('',#82610,#82610,#82612,.T.); +#82610 = VERTEX_POINT('',#82611); +#82611 = CARTESIAN_POINT('',(17.,-0.2,13.8)); +#82612 = CIRCLE('',#82613,2.); +#82613 = AXIS2_PLACEMENT_3D('',#82614,#82615,#82616); +#82614 = CARTESIAN_POINT('',(15.,-0.2,13.8)); +#82615 = DIRECTION('',(0.,0.,1.)); +#82616 = DIRECTION('',(1.,0.,-0.)); +#82617 = FACE_BOUND('',#82618,.F.); +#82618 = EDGE_LOOP('',(#82619)); +#82619 = ORIENTED_EDGE('',*,*,#82620,.T.); +#82620 = EDGE_CURVE('',#82621,#82621,#82623,.T.); +#82621 = VERTEX_POINT('',#82622); +#82622 = CARTESIAN_POINT('',(12.,-0.2,13.8)); +#82623 = CIRCLE('',#82624,2.); +#82624 = AXIS2_PLACEMENT_3D('',#82625,#82626,#82627); +#82625 = CARTESIAN_POINT('',(10.,-0.2,13.8)); +#82626 = DIRECTION('',(0.,0.,1.)); +#82627 = DIRECTION('',(1.,0.,-0.)); +#82628 = FACE_BOUND('',#82629,.F.); +#82629 = EDGE_LOOP('',(#82630)); +#82630 = ORIENTED_EDGE('',*,*,#82631,.T.); +#82631 = EDGE_CURVE('',#82632,#82632,#82634,.T.); +#82632 = VERTEX_POINT('',#82633); +#82633 = CARTESIAN_POINT('',(7.,-0.2,13.8)); +#82634 = CIRCLE('',#82635,2.); +#82635 = AXIS2_PLACEMENT_3D('',#82636,#82637,#82638); +#82636 = CARTESIAN_POINT('',(5.,-0.2,13.8)); +#82637 = DIRECTION('',(0.,0.,1.)); +#82638 = DIRECTION('',(1.,0.,-0.)); +#82639 = FACE_BOUND('',#82640,.F.); +#82640 = EDGE_LOOP('',(#82641)); +#82641 = ORIENTED_EDGE('',*,*,#82642,.T.); +#82642 = EDGE_CURVE('',#82643,#82643,#82645,.T.); +#82643 = VERTEX_POINT('',#82644); +#82644 = CARTESIAN_POINT('',(2.,-0.2,13.8)); +#82645 = CIRCLE('',#82646,2.); +#82646 = AXIS2_PLACEMENT_3D('',#82647,#82648,#82649); +#82647 = CARTESIAN_POINT('',(0.,-0.2,13.8)); +#82648 = DIRECTION('',(0.,0.,1.)); +#82649 = DIRECTION('',(1.,0.,-0.)); +#82650 = PLANE('',#82651); +#82651 = AXIS2_PLACEMENT_3D('',#82652,#82653,#82654); +#82652 = CARTESIAN_POINT('',(-2.5,5.2,13.8)); +#82653 = DIRECTION('',(0.,0.,-1.)); +#82654 = DIRECTION('',(0.,-1.,0.)); +#82655 = ADVANCED_FACE('',(#82656),#82662,.T.); +#82656 = FACE_BOUND('',#82657,.T.); +#82657 = EDGE_LOOP('',(#82658,#82659,#82660,#82661)); +#82658 = ORIENTED_EDGE('',*,*,#82588,.T.); +#82659 = ORIENTED_EDGE('',*,*,#81940,.T.); +#82660 = ORIENTED_EDGE('',*,*,#82071,.F.); +#82661 = ORIENTED_EDGE('',*,*,#81651,.F.); +#82662 = PLANE('',#82663); +#82663 = AXIS2_PLACEMENT_3D('',#82664,#82665,#82666); +#82664 = CARTESIAN_POINT('',(-2.5,2.2,13.8)); +#82665 = DIRECTION('',(-0.,0.951026496518,0.309109370483)); +#82666 = DIRECTION('',(0.,0.309109370483,-0.951026496518)); +#82667 = ADVANCED_FACE('',(#82668),#82674,.T.); +#82668 = FACE_BOUND('',#82669,.T.); +#82669 = EDGE_LOOP('',(#82670,#82671,#82672,#82673)); +#82670 = ORIENTED_EDGE('',*,*,#82011,.T.); +#82671 = ORIENTED_EDGE('',*,*,#81970,.T.); +#82672 = ORIENTED_EDGE('',*,*,#81875,.T.); +#82673 = ORIENTED_EDGE('',*,*,#81628,.T.); +#82674 = PLANE('',#82675); +#82675 = AXIS2_PLACEMENT_3D('',#82676,#82677,#82678); +#82676 = CARTESIAN_POINT('',(-2.928091935206,-3.6,7.)); +#82677 = DIRECTION('',(0.,0.,1.)); +#82678 = DIRECTION('',(1.,0.,-0.)); +#82679 = ADVANCED_FACE('',(#82680),#82686,.F.); +#82680 = FACE_BOUND('',#82681,.F.); +#82681 = EDGE_LOOP('',(#82682,#82683,#82684,#82685)); +#82682 = ORIENTED_EDGE('',*,*,#82572,.T.); +#82683 = ORIENTED_EDGE('',*,*,#81901,.T.); +#82684 = ORIENTED_EDGE('',*,*,#81674,.F.); +#82685 = ORIENTED_EDGE('',*,*,#81605,.F.); +#82686 = PLANE('',#82687); +#82687 = AXIS2_PLACEMENT_3D('',#82688,#82689,#82690); +#82688 = CARTESIAN_POINT('',(-2.5,-4.1,7.4)); +#82689 = DIRECTION('',(0.,0.,-1.)); +#82690 = DIRECTION('',(0.,-1.,0.)); +#82691 = ADVANCED_FACE('',(#82692),#82715,.F.); +#82692 = FACE_BOUND('',#82693,.F.); +#82693 = EDGE_LOOP('',(#82694,#82704,#82709,#82710)); +#82694 = ORIENTED_EDGE('',*,*,#82695,.T.); +#82695 = EDGE_CURVE('',#82696,#82698,#82700,.T.); +#82696 = VERTEX_POINT('',#82697); +#82697 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82698 = VERTEX_POINT('',#82699); +#82699 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82700 = LINE('',#82701,#82702); +#82701 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82702 = VECTOR('',#82703,1.); +#82703 = DIRECTION('',(1.,0.,0.)); +#82704 = ORIENTED_EDGE('',*,*,#82705,.T.); +#82705 = EDGE_CURVE('',#82698,#81692,#82706,.T.); +#82706 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82707,#82708),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82707 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82708 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#82709 = ORIENTED_EDGE('',*,*,#81691,.T.); +#82710 = ORIENTED_EDGE('',*,*,#82711,.F.); +#82711 = EDGE_CURVE('',#82696,#81694,#82712,.T.); +#82712 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82713,#82714),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82713 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82714 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#82715 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82716,#82717) + ,(#82718,#82719 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82716 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82717 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#82718 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82719 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#82720 = ADVANCED_FACE('',(#82721),#82738,.F.); +#82721 = FACE_BOUND('',#82722,.F.); +#82722 = EDGE_LOOP('',(#82723,#82731,#82736,#82737)); +#82723 = ORIENTED_EDGE('',*,*,#82724,.T.); +#82724 = EDGE_CURVE('',#82698,#82725,#82727,.T.); +#82725 = VERTEX_POINT('',#82726); +#82726 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82727 = LINE('',#82728,#82729); +#82728 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82729 = VECTOR('',#82730,1.); +#82730 = DIRECTION('',(0.,0.,1.)); +#82731 = ORIENTED_EDGE('',*,*,#82732,.T.); +#82732 = EDGE_CURVE('',#82725,#81702,#82733,.T.); +#82733 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82734,#82735),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82734 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82735 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#82736 = ORIENTED_EDGE('',*,*,#81701,.T.); +#82737 = ORIENTED_EDGE('',*,*,#82705,.F.); +#82738 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82739,#82740) + ,(#82741,#82742 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82739 = CARTESIAN_POINT('',(21.4,-3.8,2.4)); +#82740 = CARTESIAN_POINT('',(21.8,-4.6,1.6)); +#82741 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82742 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#82743 = ADVANCED_FACE('',(#82744),#82761,.F.); +#82744 = FACE_BOUND('',#82745,.F.); +#82745 = EDGE_LOOP('',(#82746,#82754,#82755,#82756)); +#82746 = ORIENTED_EDGE('',*,*,#82747,.T.); +#82747 = EDGE_CURVE('',#82748,#82696,#82750,.T.); +#82748 = VERTEX_POINT('',#82749); +#82749 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82750 = LINE('',#82751,#82752); +#82751 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82752 = VECTOR('',#82753,1.); +#82753 = DIRECTION('',(0.,0.,-1.)); +#82754 = ORIENTED_EDGE('',*,*,#82711,.T.); +#82755 = ORIENTED_EDGE('',*,*,#81717,.T.); +#82756 = ORIENTED_EDGE('',*,*,#82757,.F.); +#82757 = EDGE_CURVE('',#82748,#81710,#82758,.T.); +#82758 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82759,#82760),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82759 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82760 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#82761 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82762,#82763) + ,(#82764,#82765 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82762 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82763 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#82764 = CARTESIAN_POINT('',(18.6,-3.8,2.4)); +#82765 = CARTESIAN_POINT('',(18.2,-4.6,1.6)); +#82766 = ADVANCED_FACE('',(#82767),#82778,.F.); +#82767 = FACE_BOUND('',#82768,.F.); +#82768 = EDGE_LOOP('',(#82769,#82775,#82776,#82777)); +#82769 = ORIENTED_EDGE('',*,*,#82770,.T.); +#82770 = EDGE_CURVE('',#82725,#82748,#82771,.T.); +#82771 = LINE('',#82772,#82773); +#82772 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82773 = VECTOR('',#82774,1.); +#82774 = DIRECTION('',(-1.,0.,0.)); +#82775 = ORIENTED_EDGE('',*,*,#82757,.T.); +#82776 = ORIENTED_EDGE('',*,*,#81709,.T.); +#82777 = ORIENTED_EDGE('',*,*,#82732,.F.); +#82778 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82779,#82780) + ,(#82781,#82782 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82779 = CARTESIAN_POINT('',(21.4,-3.8,5.1)); +#82780 = CARTESIAN_POINT('',(21.8,-4.6,6.8)); +#82781 = CARTESIAN_POINT('',(18.6,-3.8,5.1)); +#82782 = CARTESIAN_POINT('',(18.2,-4.6,6.8)); +#82783 = ADVANCED_FACE('',(#82784),#82807,.F.); +#82784 = FACE_BOUND('',#82785,.F.); +#82785 = EDGE_LOOP('',(#82786,#82796,#82801,#82802)); +#82786 = ORIENTED_EDGE('',*,*,#82787,.T.); +#82787 = EDGE_CURVE('',#82788,#82790,#82792,.T.); +#82788 = VERTEX_POINT('',#82789); +#82789 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82790 = VERTEX_POINT('',#82791); +#82791 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82792 = LINE('',#82793,#82794); +#82793 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82794 = VECTOR('',#82795,1.); +#82795 = DIRECTION('',(1.,0.,0.)); +#82796 = ORIENTED_EDGE('',*,*,#82797,.T.); +#82797 = EDGE_CURVE('',#82790,#81726,#82798,.T.); +#82798 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82799,#82800),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82799 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82800 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#82801 = ORIENTED_EDGE('',*,*,#81725,.T.); +#82802 = ORIENTED_EDGE('',*,*,#82803,.F.); +#82803 = EDGE_CURVE('',#82788,#81728,#82804,.T.); +#82804 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82805,#82806),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82805 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82806 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#82807 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82808,#82809) + ,(#82810,#82811 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82808 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82809 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#82810 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82811 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#82812 = ADVANCED_FACE('',(#82813),#82830,.F.); +#82813 = FACE_BOUND('',#82814,.F.); +#82814 = EDGE_LOOP('',(#82815,#82823,#82828,#82829)); +#82815 = ORIENTED_EDGE('',*,*,#82816,.T.); +#82816 = EDGE_CURVE('',#82790,#82817,#82819,.T.); +#82817 = VERTEX_POINT('',#82818); +#82818 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82819 = LINE('',#82820,#82821); +#82820 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82821 = VECTOR('',#82822,1.); +#82822 = DIRECTION('',(0.,0.,1.)); +#82823 = ORIENTED_EDGE('',*,*,#82824,.T.); +#82824 = EDGE_CURVE('',#82817,#81736,#82825,.T.); +#82825 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82826,#82827),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82826 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82827 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#82828 = ORIENTED_EDGE('',*,*,#81735,.T.); +#82829 = ORIENTED_EDGE('',*,*,#82797,.F.); +#82830 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82831,#82832) + ,(#82833,#82834 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82831 = CARTESIAN_POINT('',(16.4,-3.8,2.4)); +#82832 = CARTESIAN_POINT('',(16.8,-4.6,1.6)); +#82833 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82834 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#82835 = ADVANCED_FACE('',(#82836),#82853,.F.); +#82836 = FACE_BOUND('',#82837,.F.); +#82837 = EDGE_LOOP('',(#82838,#82846,#82847,#82848)); +#82838 = ORIENTED_EDGE('',*,*,#82839,.T.); +#82839 = EDGE_CURVE('',#82840,#82788,#82842,.T.); +#82840 = VERTEX_POINT('',#82841); +#82841 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82842 = LINE('',#82843,#82844); +#82843 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82844 = VECTOR('',#82845,1.); +#82845 = DIRECTION('',(0.,0.,-1.)); +#82846 = ORIENTED_EDGE('',*,*,#82803,.T.); +#82847 = ORIENTED_EDGE('',*,*,#81751,.T.); +#82848 = ORIENTED_EDGE('',*,*,#82849,.F.); +#82849 = EDGE_CURVE('',#82840,#81744,#82850,.T.); +#82850 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82851,#82852),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82851 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82852 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#82853 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82854,#82855) + ,(#82856,#82857 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82854 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82855 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#82856 = CARTESIAN_POINT('',(13.6,-3.8,2.4)); +#82857 = CARTESIAN_POINT('',(13.2,-4.6,1.6)); +#82858 = ADVANCED_FACE('',(#82859),#82870,.F.); +#82859 = FACE_BOUND('',#82860,.F.); +#82860 = EDGE_LOOP('',(#82861,#82867,#82868,#82869)); +#82861 = ORIENTED_EDGE('',*,*,#82862,.T.); +#82862 = EDGE_CURVE('',#82817,#82840,#82863,.T.); +#82863 = LINE('',#82864,#82865); +#82864 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82865 = VECTOR('',#82866,1.); +#82866 = DIRECTION('',(-1.,0.,0.)); +#82867 = ORIENTED_EDGE('',*,*,#82849,.T.); +#82868 = ORIENTED_EDGE('',*,*,#81743,.T.); +#82869 = ORIENTED_EDGE('',*,*,#82824,.F.); +#82870 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82871,#82872) + ,(#82873,#82874 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82871 = CARTESIAN_POINT('',(16.4,-3.8,5.1)); +#82872 = CARTESIAN_POINT('',(16.8,-4.6,6.8)); +#82873 = CARTESIAN_POINT('',(13.6,-3.8,5.1)); +#82874 = CARTESIAN_POINT('',(13.2,-4.6,6.8)); +#82875 = ADVANCED_FACE('',(#82876),#82899,.F.); +#82876 = FACE_BOUND('',#82877,.F.); +#82877 = EDGE_LOOP('',(#82878,#82888,#82893,#82894)); +#82878 = ORIENTED_EDGE('',*,*,#82879,.T.); +#82879 = EDGE_CURVE('',#82880,#82882,#82884,.T.); +#82880 = VERTEX_POINT('',#82881); +#82881 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82882 = VERTEX_POINT('',#82883); +#82883 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82884 = LINE('',#82885,#82886); +#82885 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82886 = VECTOR('',#82887,1.); +#82887 = DIRECTION('',(1.,0.,0.)); +#82888 = ORIENTED_EDGE('',*,*,#82889,.T.); +#82889 = EDGE_CURVE('',#82882,#81760,#82890,.T.); +#82890 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82891,#82892),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82891 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82892 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#82893 = ORIENTED_EDGE('',*,*,#81759,.T.); +#82894 = ORIENTED_EDGE('',*,*,#82895,.F.); +#82895 = EDGE_CURVE('',#82880,#81762,#82896,.T.); +#82896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82897,#82898),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82897 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82898 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#82899 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82900,#82901) + ,(#82902,#82903 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82900 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82901 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#82902 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82903 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#82904 = ADVANCED_FACE('',(#82905),#82922,.F.); +#82905 = FACE_BOUND('',#82906,.F.); +#82906 = EDGE_LOOP('',(#82907,#82915,#82920,#82921)); +#82907 = ORIENTED_EDGE('',*,*,#82908,.T.); +#82908 = EDGE_CURVE('',#82882,#82909,#82911,.T.); +#82909 = VERTEX_POINT('',#82910); +#82910 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82911 = LINE('',#82912,#82913); +#82912 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82913 = VECTOR('',#82914,1.); +#82914 = DIRECTION('',(0.,0.,1.)); +#82915 = ORIENTED_EDGE('',*,*,#82916,.T.); +#82916 = EDGE_CURVE('',#82909,#81770,#82917,.T.); +#82917 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82918,#82919),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82918 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82919 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#82920 = ORIENTED_EDGE('',*,*,#81769,.T.); +#82921 = ORIENTED_EDGE('',*,*,#82889,.F.); +#82922 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82923,#82924) + ,(#82925,#82926 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82923 = CARTESIAN_POINT('',(11.4,-3.8,2.4)); +#82924 = CARTESIAN_POINT('',(11.8,-4.6,1.6)); +#82925 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82926 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#82927 = ADVANCED_FACE('',(#82928),#82945,.F.); +#82928 = FACE_BOUND('',#82929,.F.); +#82929 = EDGE_LOOP('',(#82930,#82938,#82939,#82940)); +#82930 = ORIENTED_EDGE('',*,*,#82931,.T.); +#82931 = EDGE_CURVE('',#82932,#82880,#82934,.T.); +#82932 = VERTEX_POINT('',#82933); +#82933 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82934 = LINE('',#82935,#82936); +#82935 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82936 = VECTOR('',#82937,1.); +#82937 = DIRECTION('',(0.,0.,-1.)); +#82938 = ORIENTED_EDGE('',*,*,#82895,.T.); +#82939 = ORIENTED_EDGE('',*,*,#81785,.T.); +#82940 = ORIENTED_EDGE('',*,*,#82941,.F.); +#82941 = EDGE_CURVE('',#82932,#81778,#82942,.T.); +#82942 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82943,#82944),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82943 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82944 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#82945 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82946,#82947) + ,(#82948,#82949 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82946 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82947 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#82948 = CARTESIAN_POINT('',(8.6,-3.8,2.4)); +#82949 = CARTESIAN_POINT('',(8.2,-4.6,1.6)); +#82950 = ADVANCED_FACE('',(#82951),#82962,.F.); +#82951 = FACE_BOUND('',#82952,.F.); +#82952 = EDGE_LOOP('',(#82953,#82959,#82960,#82961)); +#82953 = ORIENTED_EDGE('',*,*,#82954,.T.); +#82954 = EDGE_CURVE('',#82909,#82932,#82955,.T.); +#82955 = LINE('',#82956,#82957); +#82956 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82957 = VECTOR('',#82958,1.); +#82958 = DIRECTION('',(-1.,0.,0.)); +#82959 = ORIENTED_EDGE('',*,*,#82941,.T.); +#82960 = ORIENTED_EDGE('',*,*,#81777,.T.); +#82961 = ORIENTED_EDGE('',*,*,#82916,.F.); +#82962 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82963,#82964) + ,(#82965,#82966 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82963 = CARTESIAN_POINT('',(11.4,-3.8,5.1)); +#82964 = CARTESIAN_POINT('',(11.8,-4.6,6.8)); +#82965 = CARTESIAN_POINT('',(8.6,-3.8,5.1)); +#82966 = CARTESIAN_POINT('',(8.2,-4.6,6.8)); +#82967 = ADVANCED_FACE('',(#82968),#82991,.F.); +#82968 = FACE_BOUND('',#82969,.F.); +#82969 = EDGE_LOOP('',(#82970,#82980,#82985,#82986)); +#82970 = ORIENTED_EDGE('',*,*,#82971,.T.); +#82971 = EDGE_CURVE('',#82972,#82974,#82976,.T.); +#82972 = VERTEX_POINT('',#82973); +#82973 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82974 = VERTEX_POINT('',#82975); +#82975 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#82976 = LINE('',#82977,#82978); +#82977 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82978 = VECTOR('',#82979,1.); +#82979 = DIRECTION('',(1.,0.,0.)); +#82980 = ORIENTED_EDGE('',*,*,#82981,.T.); +#82981 = EDGE_CURVE('',#82974,#81794,#82982,.T.); +#82982 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82983,#82984),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82983 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#82984 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#82985 = ORIENTED_EDGE('',*,*,#81793,.T.); +#82986 = ORIENTED_EDGE('',*,*,#82987,.F.); +#82987 = EDGE_CURVE('',#82972,#81796,#82988,.T.); +#82988 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82989,#82990),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#82989 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82990 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#82991 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#82992,#82993) + ,(#82994,#82995 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#82992 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#82993 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#82994 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#82995 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#82996 = ADVANCED_FACE('',(#82997),#83014,.F.); +#82997 = FACE_BOUND('',#82998,.F.); +#82998 = EDGE_LOOP('',(#82999,#83007,#83012,#83013)); +#82999 = ORIENTED_EDGE('',*,*,#83000,.T.); +#83000 = EDGE_CURVE('',#82974,#83001,#83003,.T.); +#83001 = VERTEX_POINT('',#83002); +#83002 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83003 = LINE('',#83004,#83005); +#83004 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#83005 = VECTOR('',#83006,1.); +#83006 = DIRECTION('',(0.,0.,1.)); +#83007 = ORIENTED_EDGE('',*,*,#83008,.T.); +#83008 = EDGE_CURVE('',#83001,#81804,#83009,.T.); +#83009 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83010,#83011),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83010 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83011 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#83012 = ORIENTED_EDGE('',*,*,#81803,.T.); +#83013 = ORIENTED_EDGE('',*,*,#82981,.F.); +#83014 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83015,#83016) + ,(#83017,#83018 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83015 = CARTESIAN_POINT('',(6.4,-3.8,2.4)); +#83016 = CARTESIAN_POINT('',(6.8,-4.6,1.6)); +#83017 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83018 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#83019 = ADVANCED_FACE('',(#83020),#83037,.F.); +#83020 = FACE_BOUND('',#83021,.F.); +#83021 = EDGE_LOOP('',(#83022,#83030,#83031,#83032)); +#83022 = ORIENTED_EDGE('',*,*,#83023,.T.); +#83023 = EDGE_CURVE('',#83024,#82972,#83026,.T.); +#83024 = VERTEX_POINT('',#83025); +#83025 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83026 = LINE('',#83027,#83028); +#83027 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83028 = VECTOR('',#83029,1.); +#83029 = DIRECTION('',(0.,0.,-1.)); +#83030 = ORIENTED_EDGE('',*,*,#82987,.T.); +#83031 = ORIENTED_EDGE('',*,*,#81819,.T.); +#83032 = ORIENTED_EDGE('',*,*,#83033,.F.); +#83033 = EDGE_CURVE('',#83024,#81812,#83034,.T.); +#83034 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83035,#83036),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83035 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83036 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#83037 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83038,#83039) + ,(#83040,#83041 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83038 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83039 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#83040 = CARTESIAN_POINT('',(3.6,-3.8,2.4)); +#83041 = CARTESIAN_POINT('',(3.2,-4.6,1.6)); +#83042 = ADVANCED_FACE('',(#83043),#83054,.F.); +#83043 = FACE_BOUND('',#83044,.F.); +#83044 = EDGE_LOOP('',(#83045,#83051,#83052,#83053)); +#83045 = ORIENTED_EDGE('',*,*,#83046,.T.); +#83046 = EDGE_CURVE('',#83001,#83024,#83047,.T.); +#83047 = LINE('',#83048,#83049); +#83048 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83049 = VECTOR('',#83050,1.); +#83050 = DIRECTION('',(-1.,0.,0.)); +#83051 = ORIENTED_EDGE('',*,*,#83033,.T.); +#83052 = ORIENTED_EDGE('',*,*,#81811,.T.); +#83053 = ORIENTED_EDGE('',*,*,#83008,.F.); +#83054 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83055,#83056) + ,(#83057,#83058 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83055 = CARTESIAN_POINT('',(6.4,-3.8,5.1)); +#83056 = CARTESIAN_POINT('',(6.8,-4.6,6.8)); +#83057 = CARTESIAN_POINT('',(3.6,-3.8,5.1)); +#83058 = CARTESIAN_POINT('',(3.2,-4.6,6.8)); +#83059 = ADVANCED_FACE('',(#83060),#83083,.F.); +#83060 = FACE_BOUND('',#83061,.F.); +#83061 = EDGE_LOOP('',(#83062,#83072,#83077,#83078)); +#83062 = ORIENTED_EDGE('',*,*,#83063,.T.); +#83063 = EDGE_CURVE('',#83064,#83066,#83068,.T.); +#83064 = VERTEX_POINT('',#83065); +#83065 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83066 = VERTEX_POINT('',#83067); +#83067 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83068 = LINE('',#83069,#83070); +#83069 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83070 = VECTOR('',#83071,1.); +#83071 = DIRECTION('',(1.,0.,0.)); +#83072 = ORIENTED_EDGE('',*,*,#83073,.T.); +#83073 = EDGE_CURVE('',#83066,#81828,#83074,.T.); +#83074 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83075,#83076),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83075 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83076 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#83077 = ORIENTED_EDGE('',*,*,#81827,.T.); +#83078 = ORIENTED_EDGE('',*,*,#83079,.F.); +#83079 = EDGE_CURVE('',#83064,#81830,#83080,.T.); +#83080 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83081,#83082),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83081 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83082 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#83083 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83084,#83085) + ,(#83086,#83087 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83084 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83085 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#83086 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83087 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#83088 = ADVANCED_FACE('',(#83089),#83106,.F.); +#83089 = FACE_BOUND('',#83090,.F.); +#83090 = EDGE_LOOP('',(#83091,#83099,#83104,#83105)); +#83091 = ORIENTED_EDGE('',*,*,#83092,.T.); +#83092 = EDGE_CURVE('',#83066,#83093,#83095,.T.); +#83093 = VERTEX_POINT('',#83094); +#83094 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83095 = LINE('',#83096,#83097); +#83096 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83097 = VECTOR('',#83098,1.); +#83098 = DIRECTION('',(0.,0.,1.)); +#83099 = ORIENTED_EDGE('',*,*,#83100,.T.); +#83100 = EDGE_CURVE('',#83093,#81838,#83101,.T.); +#83101 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83102,#83103),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83102 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83103 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#83104 = ORIENTED_EDGE('',*,*,#81837,.T.); +#83105 = ORIENTED_EDGE('',*,*,#83073,.F.); +#83106 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83107,#83108) + ,(#83109,#83110 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83107 = CARTESIAN_POINT('',(1.4,-3.8,2.4)); +#83108 = CARTESIAN_POINT('',(1.8,-4.6,1.6)); +#83109 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83110 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#83111 = ADVANCED_FACE('',(#83112),#83129,.F.); +#83112 = FACE_BOUND('',#83113,.F.); +#83113 = EDGE_LOOP('',(#83114,#83122,#83123,#83124)); +#83114 = ORIENTED_EDGE('',*,*,#83115,.T.); +#83115 = EDGE_CURVE('',#83116,#83064,#83118,.T.); +#83116 = VERTEX_POINT('',#83117); +#83117 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83118 = LINE('',#83119,#83120); +#83119 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83120 = VECTOR('',#83121,1.); +#83121 = DIRECTION('',(0.,0.,-1.)); +#83122 = ORIENTED_EDGE('',*,*,#83079,.T.); +#83123 = ORIENTED_EDGE('',*,*,#81853,.T.); +#83124 = ORIENTED_EDGE('',*,*,#83125,.F.); +#83125 = EDGE_CURVE('',#83116,#81846,#83126,.T.); +#83126 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83127,#83128),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#83127 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83128 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#83129 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83130,#83131) + ,(#83132,#83133 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.2,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83130 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83131 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#83132 = CARTESIAN_POINT('',(-1.4,-3.8,2.4)); +#83133 = CARTESIAN_POINT('',(-1.8,-4.6,1.6)); +#83134 = ADVANCED_FACE('',(#83135),#83146,.F.); +#83135 = FACE_BOUND('',#83136,.F.); +#83136 = EDGE_LOOP('',(#83137,#83143,#83144,#83145)); +#83137 = ORIENTED_EDGE('',*,*,#83138,.T.); +#83138 = EDGE_CURVE('',#83093,#83116,#83139,.T.); +#83139 = LINE('',#83140,#83141); +#83140 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83141 = VECTOR('',#83142,1.); +#83142 = DIRECTION('',(-1.,0.,0.)); +#83143 = ORIENTED_EDGE('',*,*,#83125,.T.); +#83144 = ORIENTED_EDGE('',*,*,#81845,.T.); +#83145 = ORIENTED_EDGE('',*,*,#83100,.F.); +#83146 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#83147,#83148) + ,(#83149,#83150 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-3.6,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#83147 = CARTESIAN_POINT('',(1.4,-3.8,5.1)); +#83148 = CARTESIAN_POINT('',(1.8,-4.6,6.8)); +#83149 = CARTESIAN_POINT('',(-1.4,-3.8,5.1)); +#83150 = CARTESIAN_POINT('',(-1.8,-4.6,6.8)); +#83151 = ADVANCED_FACE('',(#83152),#83158,.F.); +#83152 = FACE_BOUND('',#83153,.F.); +#83153 = EDGE_LOOP('',(#83154,#83155,#83156,#83157)); +#83154 = ORIENTED_EDGE('',*,*,#82052,.T.); +#83155 = ORIENTED_EDGE('',*,*,#82035,.T.); +#83156 = ORIENTED_EDGE('',*,*,#81994,.T.); +#83157 = ORIENTED_EDGE('',*,*,#81917,.T.); +#83158 = PLANE('',#83159); +#83159 = AXIS2_PLACEMENT_3D('',#83160,#83161,#83162); +#83160 = CARTESIAN_POINT('',(22.071908064794,-3.6,7.)); +#83161 = DIRECTION('',(0.,0.,1.)); +#83162 = DIRECTION('',(1.,0.,-0.)); +#83163 = ADVANCED_FACE('',(#83164),#83170,.F.); +#83164 = FACE_BOUND('',#83165,.F.); +#83165 = EDGE_LOOP('',(#83166,#83167,#83168,#83169)); +#83166 = ORIENTED_EDGE('',*,*,#82094,.T.); +#83167 = ORIENTED_EDGE('',*,*,#82118,.T.); +#83168 = ORIENTED_EDGE('',*,*,#82142,.T.); +#83169 = ORIENTED_EDGE('',*,*,#82166,.T.); +#83170 = PLANE('',#83171); +#83171 = AXIS2_PLACEMENT_3D('',#83172,#83173,#83174); +#83172 = CARTESIAN_POINT('',(20.,0.,-3.5)); +#83173 = DIRECTION('',(0.,0.,1.)); +#83174 = DIRECTION('',(1.,0.,-0.)); +#83175 = ADVANCED_FACE('',(#83176),#83182,.F.); +#83176 = FACE_BOUND('',#83177,.F.); +#83177 = EDGE_LOOP('',(#83178,#83179,#83180,#83181)); +#83178 = ORIENTED_EDGE('',*,*,#82190,.T.); +#83179 = ORIENTED_EDGE('',*,*,#82214,.T.); +#83180 = ORIENTED_EDGE('',*,*,#82238,.T.); +#83181 = ORIENTED_EDGE('',*,*,#82262,.T.); +#83182 = PLANE('',#83183); +#83183 = AXIS2_PLACEMENT_3D('',#83184,#83185,#83186); +#83184 = CARTESIAN_POINT('',(15.,0.,-3.5)); +#83185 = DIRECTION('',(0.,0.,1.)); +#83186 = DIRECTION('',(1.,0.,-0.)); +#83187 = ADVANCED_FACE('',(#83188),#83194,.F.); +#83188 = FACE_BOUND('',#83189,.F.); +#83189 = EDGE_LOOP('',(#83190,#83191,#83192,#83193)); +#83190 = ORIENTED_EDGE('',*,*,#82286,.T.); +#83191 = ORIENTED_EDGE('',*,*,#82310,.T.); +#83192 = ORIENTED_EDGE('',*,*,#82334,.T.); +#83193 = ORIENTED_EDGE('',*,*,#82358,.T.); +#83194 = PLANE('',#83195); +#83195 = AXIS2_PLACEMENT_3D('',#83196,#83197,#83198); +#83196 = CARTESIAN_POINT('',(10.,0.,-3.5)); +#83197 = DIRECTION('',(0.,0.,1.)); +#83198 = DIRECTION('',(1.,0.,-0.)); +#83199 = ADVANCED_FACE('',(#83200),#83206,.F.); +#83200 = FACE_BOUND('',#83201,.F.); +#83201 = EDGE_LOOP('',(#83202,#83203,#83204,#83205)); +#83202 = ORIENTED_EDGE('',*,*,#82382,.T.); +#83203 = ORIENTED_EDGE('',*,*,#82406,.T.); +#83204 = ORIENTED_EDGE('',*,*,#82430,.T.); +#83205 = ORIENTED_EDGE('',*,*,#82454,.T.); +#83206 = PLANE('',#83207); +#83207 = AXIS2_PLACEMENT_3D('',#83208,#83209,#83210); +#83208 = CARTESIAN_POINT('',(5.,0.,-3.5)); +#83209 = DIRECTION('',(0.,0.,1.)); +#83210 = DIRECTION('',(1.,0.,-0.)); +#83211 = ADVANCED_FACE('',(#83212),#83218,.F.); +#83212 = FACE_BOUND('',#83213,.F.); +#83213 = EDGE_LOOP('',(#83214,#83215,#83216,#83217)); +#83214 = ORIENTED_EDGE('',*,*,#82478,.T.); +#83215 = ORIENTED_EDGE('',*,*,#82502,.T.); +#83216 = ORIENTED_EDGE('',*,*,#82526,.T.); +#83217 = ORIENTED_EDGE('',*,*,#82550,.T.); +#83218 = PLANE('',#83219); +#83219 = AXIS2_PLACEMENT_3D('',#83220,#83221,#83222); +#83220 = CARTESIAN_POINT('',(0.,0.,-3.5)); +#83221 = DIRECTION('',(0.,0.,1.)); +#83222 = DIRECTION('',(1.,0.,-0.)); +#83223 = ADVANCED_FACE('',(#83224),#83329,.F.); +#83224 = FACE_BOUND('',#83225,.F.); +#83225 = EDGE_LOOP('',(#83226,#83234,#83235,#83236,#83245,#83253,#83262, + #83270,#83279,#83287,#83296,#83305,#83314,#83322)); +#83226 = ORIENTED_EDGE('',*,*,#83227,.F.); +#83227 = EDGE_CURVE('',#82599,#83228,#83230,.T.); +#83228 = VERTEX_POINT('',#83229); +#83229 = CARTESIAN_POINT('',(22.,-0.2,2.4)); +#83230 = LINE('',#83231,#83232); +#83231 = CARTESIAN_POINT('',(22.,-0.2,13.8)); +#83232 = VECTOR('',#83233,1.); +#83233 = DIRECTION('',(-0.,-0.,-1.)); +#83234 = ORIENTED_EDGE('',*,*,#82598,.F.); +#83235 = ORIENTED_EDGE('',*,*,#83227,.T.); +#83236 = ORIENTED_EDGE('',*,*,#83237,.T.); +#83237 = EDGE_CURVE('',#83228,#83238,#83240,.T.); +#83238 = VERTEX_POINT('',#83239); +#83239 = CARTESIAN_POINT('',(21.4,1.228285685709,2.4)); +#83240 = CIRCLE('',#83241,2.); +#83241 = AXIS2_PLACEMENT_3D('',#83242,#83243,#83244); +#83242 = CARTESIAN_POINT('',(20.,-0.2,2.4)); +#83243 = DIRECTION('',(0.,0.,1.)); +#83244 = DIRECTION('',(1.,0.,-0.)); +#83245 = ORIENTED_EDGE('',*,*,#83246,.T.); +#83246 = EDGE_CURVE('',#83238,#83247,#83249,.T.); +#83247 = VERTEX_POINT('',#83248); +#83248 = CARTESIAN_POINT('',(21.4,1.228285685709,5.1)); +#83249 = LINE('',#83250,#83251); +#83250 = CARTESIAN_POINT('',(21.4,1.228285685709,13.8)); +#83251 = VECTOR('',#83252,1.); +#83252 = DIRECTION('',(0.,0.,1.)); +#83253 = ORIENTED_EDGE('',*,*,#83254,.T.); +#83254 = EDGE_CURVE('',#83247,#83255,#83257,.T.); +#83255 = VERTEX_POINT('',#83256); +#83256 = CARTESIAN_POINT('',(18.6,1.228285685709,5.1)); +#83257 = CIRCLE('',#83258,2.); +#83258 = AXIS2_PLACEMENT_3D('',#83259,#83260,#83261); +#83259 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83260 = DIRECTION('',(0.,0.,1.)); +#83261 = DIRECTION('',(1.,0.,-0.)); +#83262 = ORIENTED_EDGE('',*,*,#83263,.F.); +#83263 = EDGE_CURVE('',#83264,#83255,#83266,.T.); +#83264 = VERTEX_POINT('',#83265); +#83265 = CARTESIAN_POINT('',(18.6,1.228285685709,2.4)); +#83266 = LINE('',#83267,#83268); +#83267 = CARTESIAN_POINT('',(18.6,1.228285685709,13.8)); +#83268 = VECTOR('',#83269,1.); +#83269 = DIRECTION('',(0.,0.,1.)); +#83270 = ORIENTED_EDGE('',*,*,#83271,.T.); +#83271 = EDGE_CURVE('',#83264,#83272,#83274,.T.); +#83272 = VERTEX_POINT('',#83273); +#83273 = CARTESIAN_POINT('',(18.6,-1.628285685709,2.4)); +#83274 = CIRCLE('',#83275,2.); +#83275 = AXIS2_PLACEMENT_3D('',#83276,#83277,#83278); +#83276 = CARTESIAN_POINT('',(20.,-0.2,2.4)); +#83277 = DIRECTION('',(0.,0.,1.)); +#83278 = DIRECTION('',(1.,0.,-0.)); +#83279 = ORIENTED_EDGE('',*,*,#83280,.T.); +#83280 = EDGE_CURVE('',#83272,#83281,#83283,.T.); +#83281 = VERTEX_POINT('',#83282); +#83282 = CARTESIAN_POINT('',(18.6,-1.628285685709,5.1)); +#83283 = LINE('',#83284,#83285); +#83284 = CARTESIAN_POINT('',(18.6,-1.628285685709,13.8)); +#83285 = VECTOR('',#83286,1.); +#83286 = DIRECTION('',(0.,0.,1.)); +#83287 = ORIENTED_EDGE('',*,*,#83288,.T.); +#83288 = EDGE_CURVE('',#83281,#83289,#83291,.T.); +#83289 = VERTEX_POINT('',#83290); +#83290 = CARTESIAN_POINT('',(19.128220211292,-2.,5.1)); +#83291 = CIRCLE('',#83292,2.); +#83292 = AXIS2_PLACEMENT_3D('',#83293,#83294,#83295); +#83293 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83294 = DIRECTION('',(0.,0.,1.)); +#83295 = DIRECTION('',(1.,0.,-0.)); +#83296 = ORIENTED_EDGE('',*,*,#83297,.T.); +#83297 = EDGE_CURVE('',#83289,#83298,#83300,.T.); +#83298 = VERTEX_POINT('',#83299); +#83299 = CARTESIAN_POINT('',(20.871779788708,-2.,5.1)); +#83300 = CIRCLE('',#83301,2.); +#83301 = AXIS2_PLACEMENT_3D('',#83302,#83303,#83304); +#83302 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83303 = DIRECTION('',(0.,0.,1.)); +#83304 = DIRECTION('',(1.,0.,-0.)); +#83305 = ORIENTED_EDGE('',*,*,#83306,.T.); +#83306 = EDGE_CURVE('',#83298,#83307,#83309,.T.); +#83307 = VERTEX_POINT('',#83308); +#83308 = CARTESIAN_POINT('',(21.4,-1.628285685709,5.1)); +#83309 = CIRCLE('',#83310,2.); +#83310 = AXIS2_PLACEMENT_3D('',#83311,#83312,#83313); +#83311 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#83312 = DIRECTION('',(0.,0.,1.)); +#83313 = DIRECTION('',(1.,0.,-0.)); +#83314 = ORIENTED_EDGE('',*,*,#83315,.F.); +#83315 = EDGE_CURVE('',#83316,#83307,#83318,.T.); +#83316 = VERTEX_POINT('',#83317); +#83317 = CARTESIAN_POINT('',(21.4,-1.628285685709,2.4)); +#83318 = LINE('',#83319,#83320); +#83319 = CARTESIAN_POINT('',(21.4,-1.628285685709,13.8)); +#83320 = VECTOR('',#83321,1.); +#83321 = DIRECTION('',(0.,0.,1.)); +#83322 = ORIENTED_EDGE('',*,*,#83323,.T.); +#83323 = EDGE_CURVE('',#83316,#83228,#83324,.T.); +#83324 = CIRCLE('',#83325,2.); +#83325 = AXIS2_PLACEMENT_3D('',#83326,#83327,#83328); +#83326 = CARTESIAN_POINT('',(20.,-0.2,2.4)); +#83327 = DIRECTION('',(0.,0.,1.)); +#83328 = DIRECTION('',(1.,0.,-0.)); +#83329 = CYLINDRICAL_SURFACE('',#83330,2.); +#83330 = AXIS2_PLACEMENT_3D('',#83331,#83332,#83333); +#83331 = CARTESIAN_POINT('',(20.,-0.2,13.8)); +#83332 = DIRECTION('',(0.,0.,1.)); +#83333 = DIRECTION('',(1.,0.,-0.)); +#83334 = ADVANCED_FACE('',(#83335),#83440,.F.); +#83335 = FACE_BOUND('',#83336,.F.); +#83336 = EDGE_LOOP('',(#83337,#83345,#83346,#83347,#83356,#83364,#83373, + #83381,#83390,#83398,#83407,#83416,#83425,#83433)); +#83337 = ORIENTED_EDGE('',*,*,#83338,.F.); +#83338 = EDGE_CURVE('',#82610,#83339,#83341,.T.); +#83339 = VERTEX_POINT('',#83340); +#83340 = CARTESIAN_POINT('',(17.,-0.2,2.4)); +#83341 = LINE('',#83342,#83343); +#83342 = CARTESIAN_POINT('',(17.,-0.2,13.8)); +#83343 = VECTOR('',#83344,1.); +#83344 = DIRECTION('',(-0.,-0.,-1.)); +#83345 = ORIENTED_EDGE('',*,*,#82609,.F.); +#83346 = ORIENTED_EDGE('',*,*,#83338,.T.); +#83347 = ORIENTED_EDGE('',*,*,#83348,.T.); +#83348 = EDGE_CURVE('',#83339,#83349,#83351,.T.); +#83349 = VERTEX_POINT('',#83350); +#83350 = CARTESIAN_POINT('',(16.4,1.228285685709,2.4)); +#83351 = CIRCLE('',#83352,2.); +#83352 = AXIS2_PLACEMENT_3D('',#83353,#83354,#83355); +#83353 = CARTESIAN_POINT('',(15.,-0.2,2.4)); +#83354 = DIRECTION('',(0.,0.,1.)); +#83355 = DIRECTION('',(1.,0.,-0.)); +#83356 = ORIENTED_EDGE('',*,*,#83357,.T.); +#83357 = EDGE_CURVE('',#83349,#83358,#83360,.T.); +#83358 = VERTEX_POINT('',#83359); +#83359 = CARTESIAN_POINT('',(16.4,1.228285685709,5.1)); +#83360 = LINE('',#83361,#83362); +#83361 = CARTESIAN_POINT('',(16.4,1.228285685709,13.8)); +#83362 = VECTOR('',#83363,1.); +#83363 = DIRECTION('',(0.,0.,1.)); +#83364 = ORIENTED_EDGE('',*,*,#83365,.T.); +#83365 = EDGE_CURVE('',#83358,#83366,#83368,.T.); +#83366 = VERTEX_POINT('',#83367); +#83367 = CARTESIAN_POINT('',(13.6,1.228285685709,5.1)); +#83368 = CIRCLE('',#83369,2.); +#83369 = AXIS2_PLACEMENT_3D('',#83370,#83371,#83372); +#83370 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83371 = DIRECTION('',(0.,0.,1.)); +#83372 = DIRECTION('',(1.,0.,-0.)); +#83373 = ORIENTED_EDGE('',*,*,#83374,.F.); +#83374 = EDGE_CURVE('',#83375,#83366,#83377,.T.); +#83375 = VERTEX_POINT('',#83376); +#83376 = CARTESIAN_POINT('',(13.6,1.228285685709,2.4)); +#83377 = LINE('',#83378,#83379); +#83378 = CARTESIAN_POINT('',(13.6,1.228285685709,13.8)); +#83379 = VECTOR('',#83380,1.); +#83380 = DIRECTION('',(0.,0.,1.)); +#83381 = ORIENTED_EDGE('',*,*,#83382,.T.); +#83382 = EDGE_CURVE('',#83375,#83383,#83385,.T.); +#83383 = VERTEX_POINT('',#83384); +#83384 = CARTESIAN_POINT('',(13.6,-1.628285685709,2.4)); +#83385 = CIRCLE('',#83386,2.); +#83386 = AXIS2_PLACEMENT_3D('',#83387,#83388,#83389); +#83387 = CARTESIAN_POINT('',(15.,-0.2,2.4)); +#83388 = DIRECTION('',(0.,0.,1.)); +#83389 = DIRECTION('',(1.,0.,-0.)); +#83390 = ORIENTED_EDGE('',*,*,#83391,.T.); +#83391 = EDGE_CURVE('',#83383,#83392,#83394,.T.); +#83392 = VERTEX_POINT('',#83393); +#83393 = CARTESIAN_POINT('',(13.6,-1.628285685709,5.1)); +#83394 = LINE('',#83395,#83396); +#83395 = CARTESIAN_POINT('',(13.6,-1.628285685709,13.8)); +#83396 = VECTOR('',#83397,1.); +#83397 = DIRECTION('',(0.,0.,1.)); +#83398 = ORIENTED_EDGE('',*,*,#83399,.T.); +#83399 = EDGE_CURVE('',#83392,#83400,#83402,.T.); +#83400 = VERTEX_POINT('',#83401); +#83401 = CARTESIAN_POINT('',(14.128220211292,-2.,5.1)); +#83402 = CIRCLE('',#83403,2.); +#83403 = AXIS2_PLACEMENT_3D('',#83404,#83405,#83406); +#83404 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83405 = DIRECTION('',(0.,0.,1.)); +#83406 = DIRECTION('',(1.,0.,-0.)); +#83407 = ORIENTED_EDGE('',*,*,#83408,.T.); +#83408 = EDGE_CURVE('',#83400,#83409,#83411,.T.); +#83409 = VERTEX_POINT('',#83410); +#83410 = CARTESIAN_POINT('',(15.871779788708,-2.,5.1)); +#83411 = CIRCLE('',#83412,2.); +#83412 = AXIS2_PLACEMENT_3D('',#83413,#83414,#83415); +#83413 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83414 = DIRECTION('',(0.,0.,1.)); +#83415 = DIRECTION('',(1.,0.,-0.)); +#83416 = ORIENTED_EDGE('',*,*,#83417,.T.); +#83417 = EDGE_CURVE('',#83409,#83418,#83420,.T.); +#83418 = VERTEX_POINT('',#83419); +#83419 = CARTESIAN_POINT('',(16.4,-1.628285685709,5.1)); +#83420 = CIRCLE('',#83421,2.); +#83421 = AXIS2_PLACEMENT_3D('',#83422,#83423,#83424); +#83422 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#83423 = DIRECTION('',(0.,0.,1.)); +#83424 = DIRECTION('',(1.,0.,-0.)); +#83425 = ORIENTED_EDGE('',*,*,#83426,.F.); +#83426 = EDGE_CURVE('',#83427,#83418,#83429,.T.); +#83427 = VERTEX_POINT('',#83428); +#83428 = CARTESIAN_POINT('',(16.4,-1.628285685709,2.4)); +#83429 = LINE('',#83430,#83431); +#83430 = CARTESIAN_POINT('',(16.4,-1.628285685709,13.8)); +#83431 = VECTOR('',#83432,1.); +#83432 = DIRECTION('',(0.,0.,1.)); +#83433 = ORIENTED_EDGE('',*,*,#83434,.T.); +#83434 = EDGE_CURVE('',#83427,#83339,#83435,.T.); +#83435 = CIRCLE('',#83436,2.); +#83436 = AXIS2_PLACEMENT_3D('',#83437,#83438,#83439); +#83437 = CARTESIAN_POINT('',(15.,-0.2,2.4)); +#83438 = DIRECTION('',(0.,0.,1.)); +#83439 = DIRECTION('',(1.,0.,-0.)); +#83440 = CYLINDRICAL_SURFACE('',#83441,2.); +#83441 = AXIS2_PLACEMENT_3D('',#83442,#83443,#83444); +#83442 = CARTESIAN_POINT('',(15.,-0.2,13.8)); +#83443 = DIRECTION('',(0.,0.,1.)); +#83444 = DIRECTION('',(1.,0.,-0.)); +#83445 = ADVANCED_FACE('',(#83446),#83551,.F.); +#83446 = FACE_BOUND('',#83447,.F.); +#83447 = EDGE_LOOP('',(#83448,#83456,#83457,#83458,#83467,#83475,#83484, + #83492,#83501,#83509,#83518,#83527,#83536,#83544)); +#83448 = ORIENTED_EDGE('',*,*,#83449,.F.); +#83449 = EDGE_CURVE('',#82621,#83450,#83452,.T.); +#83450 = VERTEX_POINT('',#83451); +#83451 = CARTESIAN_POINT('',(12.,-0.2,2.4)); +#83452 = LINE('',#83453,#83454); +#83453 = CARTESIAN_POINT('',(12.,-0.2,13.8)); +#83454 = VECTOR('',#83455,1.); +#83455 = DIRECTION('',(-0.,-0.,-1.)); +#83456 = ORIENTED_EDGE('',*,*,#82620,.F.); +#83457 = ORIENTED_EDGE('',*,*,#83449,.T.); +#83458 = ORIENTED_EDGE('',*,*,#83459,.T.); +#83459 = EDGE_CURVE('',#83450,#83460,#83462,.T.); +#83460 = VERTEX_POINT('',#83461); +#83461 = CARTESIAN_POINT('',(11.4,1.228285685709,2.4)); +#83462 = CIRCLE('',#83463,2.); +#83463 = AXIS2_PLACEMENT_3D('',#83464,#83465,#83466); +#83464 = CARTESIAN_POINT('',(10.,-0.2,2.4)); +#83465 = DIRECTION('',(0.,0.,1.)); +#83466 = DIRECTION('',(1.,0.,-0.)); +#83467 = ORIENTED_EDGE('',*,*,#83468,.T.); +#83468 = EDGE_CURVE('',#83460,#83469,#83471,.T.); +#83469 = VERTEX_POINT('',#83470); +#83470 = CARTESIAN_POINT('',(11.4,1.228285685709,5.1)); +#83471 = LINE('',#83472,#83473); +#83472 = CARTESIAN_POINT('',(11.4,1.228285685709,13.8)); +#83473 = VECTOR('',#83474,1.); +#83474 = DIRECTION('',(0.,0.,1.)); +#83475 = ORIENTED_EDGE('',*,*,#83476,.T.); +#83476 = EDGE_CURVE('',#83469,#83477,#83479,.T.); +#83477 = VERTEX_POINT('',#83478); +#83478 = CARTESIAN_POINT('',(8.6,1.228285685709,5.1)); +#83479 = CIRCLE('',#83480,2.); +#83480 = AXIS2_PLACEMENT_3D('',#83481,#83482,#83483); +#83481 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83482 = DIRECTION('',(0.,0.,1.)); +#83483 = DIRECTION('',(1.,0.,-0.)); +#83484 = ORIENTED_EDGE('',*,*,#83485,.F.); +#83485 = EDGE_CURVE('',#83486,#83477,#83488,.T.); +#83486 = VERTEX_POINT('',#83487); +#83487 = CARTESIAN_POINT('',(8.6,1.228285685709,2.4)); +#83488 = LINE('',#83489,#83490); +#83489 = CARTESIAN_POINT('',(8.6,1.228285685709,13.8)); +#83490 = VECTOR('',#83491,1.); +#83491 = DIRECTION('',(0.,0.,1.)); +#83492 = ORIENTED_EDGE('',*,*,#83493,.T.); +#83493 = EDGE_CURVE('',#83486,#83494,#83496,.T.); +#83494 = VERTEX_POINT('',#83495); +#83495 = CARTESIAN_POINT('',(8.6,-1.628285685709,2.4)); +#83496 = CIRCLE('',#83497,2.); +#83497 = AXIS2_PLACEMENT_3D('',#83498,#83499,#83500); +#83498 = CARTESIAN_POINT('',(10.,-0.2,2.4)); +#83499 = DIRECTION('',(0.,0.,1.)); +#83500 = DIRECTION('',(1.,0.,-0.)); +#83501 = ORIENTED_EDGE('',*,*,#83502,.T.); +#83502 = EDGE_CURVE('',#83494,#83503,#83505,.T.); +#83503 = VERTEX_POINT('',#83504); +#83504 = CARTESIAN_POINT('',(8.6,-1.628285685709,5.1)); +#83505 = LINE('',#83506,#83507); +#83506 = CARTESIAN_POINT('',(8.6,-1.628285685709,13.8)); +#83507 = VECTOR('',#83508,1.); +#83508 = DIRECTION('',(0.,0.,1.)); +#83509 = ORIENTED_EDGE('',*,*,#83510,.T.); +#83510 = EDGE_CURVE('',#83503,#83511,#83513,.T.); +#83511 = VERTEX_POINT('',#83512); +#83512 = CARTESIAN_POINT('',(9.128220211292,-2.,5.1)); +#83513 = CIRCLE('',#83514,2.); +#83514 = AXIS2_PLACEMENT_3D('',#83515,#83516,#83517); +#83515 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83516 = DIRECTION('',(0.,0.,1.)); +#83517 = DIRECTION('',(1.,0.,-0.)); +#83518 = ORIENTED_EDGE('',*,*,#83519,.T.); +#83519 = EDGE_CURVE('',#83511,#83520,#83522,.T.); +#83520 = VERTEX_POINT('',#83521); +#83521 = CARTESIAN_POINT('',(10.871779788708,-2.,5.1)); +#83522 = CIRCLE('',#83523,2.); +#83523 = AXIS2_PLACEMENT_3D('',#83524,#83525,#83526); +#83524 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83525 = DIRECTION('',(0.,0.,1.)); +#83526 = DIRECTION('',(1.,0.,-0.)); +#83527 = ORIENTED_EDGE('',*,*,#83528,.T.); +#83528 = EDGE_CURVE('',#83520,#83529,#83531,.T.); +#83529 = VERTEX_POINT('',#83530); +#83530 = CARTESIAN_POINT('',(11.4,-1.628285685709,5.1)); +#83531 = CIRCLE('',#83532,2.); +#83532 = AXIS2_PLACEMENT_3D('',#83533,#83534,#83535); +#83533 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#83534 = DIRECTION('',(0.,0.,1.)); +#83535 = DIRECTION('',(1.,0.,-0.)); +#83536 = ORIENTED_EDGE('',*,*,#83537,.F.); +#83537 = EDGE_CURVE('',#83538,#83529,#83540,.T.); +#83538 = VERTEX_POINT('',#83539); +#83539 = CARTESIAN_POINT('',(11.4,-1.628285685709,2.4)); +#83540 = LINE('',#83541,#83542); +#83541 = CARTESIAN_POINT('',(11.4,-1.628285685709,13.8)); +#83542 = VECTOR('',#83543,1.); +#83543 = DIRECTION('',(0.,0.,1.)); +#83544 = ORIENTED_EDGE('',*,*,#83545,.T.); +#83545 = EDGE_CURVE('',#83538,#83450,#83546,.T.); +#83546 = CIRCLE('',#83547,2.); +#83547 = AXIS2_PLACEMENT_3D('',#83548,#83549,#83550); +#83548 = CARTESIAN_POINT('',(10.,-0.2,2.4)); +#83549 = DIRECTION('',(0.,0.,1.)); +#83550 = DIRECTION('',(1.,0.,-0.)); +#83551 = CYLINDRICAL_SURFACE('',#83552,2.); +#83552 = AXIS2_PLACEMENT_3D('',#83553,#83554,#83555); +#83553 = CARTESIAN_POINT('',(10.,-0.2,13.8)); +#83554 = DIRECTION('',(0.,0.,1.)); +#83555 = DIRECTION('',(1.,0.,-0.)); +#83556 = ADVANCED_FACE('',(#83557),#83662,.F.); +#83557 = FACE_BOUND('',#83558,.F.); +#83558 = EDGE_LOOP('',(#83559,#83567,#83568,#83569,#83578,#83586,#83595, + #83603,#83612,#83620,#83629,#83638,#83647,#83655)); +#83559 = ORIENTED_EDGE('',*,*,#83560,.F.); +#83560 = EDGE_CURVE('',#82632,#83561,#83563,.T.); +#83561 = VERTEX_POINT('',#83562); +#83562 = CARTESIAN_POINT('',(7.,-0.2,2.4)); +#83563 = LINE('',#83564,#83565); +#83564 = CARTESIAN_POINT('',(7.,-0.2,13.8)); +#83565 = VECTOR('',#83566,1.); +#83566 = DIRECTION('',(-0.,-0.,-1.)); +#83567 = ORIENTED_EDGE('',*,*,#82631,.F.); +#83568 = ORIENTED_EDGE('',*,*,#83560,.T.); +#83569 = ORIENTED_EDGE('',*,*,#83570,.T.); +#83570 = EDGE_CURVE('',#83561,#83571,#83573,.T.); +#83571 = VERTEX_POINT('',#83572); +#83572 = CARTESIAN_POINT('',(6.4,1.228285685709,2.4)); +#83573 = CIRCLE('',#83574,2.); +#83574 = AXIS2_PLACEMENT_3D('',#83575,#83576,#83577); +#83575 = CARTESIAN_POINT('',(5.,-0.2,2.4)); +#83576 = DIRECTION('',(0.,0.,1.)); +#83577 = DIRECTION('',(1.,0.,-0.)); +#83578 = ORIENTED_EDGE('',*,*,#83579,.T.); +#83579 = EDGE_CURVE('',#83571,#83580,#83582,.T.); +#83580 = VERTEX_POINT('',#83581); +#83581 = CARTESIAN_POINT('',(6.4,1.228285685709,5.1)); +#83582 = LINE('',#83583,#83584); +#83583 = CARTESIAN_POINT('',(6.4,1.228285685709,13.8)); +#83584 = VECTOR('',#83585,1.); +#83585 = DIRECTION('',(0.,0.,1.)); +#83586 = ORIENTED_EDGE('',*,*,#83587,.T.); +#83587 = EDGE_CURVE('',#83580,#83588,#83590,.T.); +#83588 = VERTEX_POINT('',#83589); +#83589 = CARTESIAN_POINT('',(3.6,1.228285685709,5.1)); +#83590 = CIRCLE('',#83591,2.); +#83591 = AXIS2_PLACEMENT_3D('',#83592,#83593,#83594); +#83592 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83593 = DIRECTION('',(0.,0.,1.)); +#83594 = DIRECTION('',(1.,0.,-0.)); +#83595 = ORIENTED_EDGE('',*,*,#83596,.F.); +#83596 = EDGE_CURVE('',#83597,#83588,#83599,.T.); +#83597 = VERTEX_POINT('',#83598); +#83598 = CARTESIAN_POINT('',(3.6,1.228285685709,2.4)); +#83599 = LINE('',#83600,#83601); +#83600 = CARTESIAN_POINT('',(3.6,1.228285685709,13.8)); +#83601 = VECTOR('',#83602,1.); +#83602 = DIRECTION('',(0.,0.,1.)); +#83603 = ORIENTED_EDGE('',*,*,#83604,.T.); +#83604 = EDGE_CURVE('',#83597,#83605,#83607,.T.); +#83605 = VERTEX_POINT('',#83606); +#83606 = CARTESIAN_POINT('',(3.6,-1.628285685709,2.4)); +#83607 = CIRCLE('',#83608,2.); +#83608 = AXIS2_PLACEMENT_3D('',#83609,#83610,#83611); +#83609 = CARTESIAN_POINT('',(5.,-0.2,2.4)); +#83610 = DIRECTION('',(0.,0.,1.)); +#83611 = DIRECTION('',(1.,0.,-0.)); +#83612 = ORIENTED_EDGE('',*,*,#83613,.T.); +#83613 = EDGE_CURVE('',#83605,#83614,#83616,.T.); +#83614 = VERTEX_POINT('',#83615); +#83615 = CARTESIAN_POINT('',(3.6,-1.628285685709,5.1)); +#83616 = LINE('',#83617,#83618); +#83617 = CARTESIAN_POINT('',(3.6,-1.628285685709,13.8)); +#83618 = VECTOR('',#83619,1.); +#83619 = DIRECTION('',(0.,0.,1.)); +#83620 = ORIENTED_EDGE('',*,*,#83621,.T.); +#83621 = EDGE_CURVE('',#83614,#83622,#83624,.T.); +#83622 = VERTEX_POINT('',#83623); +#83623 = CARTESIAN_POINT('',(4.128220211292,-2.,5.1)); +#83624 = CIRCLE('',#83625,2.); +#83625 = AXIS2_PLACEMENT_3D('',#83626,#83627,#83628); +#83626 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83627 = DIRECTION('',(0.,0.,1.)); +#83628 = DIRECTION('',(1.,0.,-0.)); +#83629 = ORIENTED_EDGE('',*,*,#83630,.T.); +#83630 = EDGE_CURVE('',#83622,#83631,#83633,.T.); +#83631 = VERTEX_POINT('',#83632); +#83632 = CARTESIAN_POINT('',(5.871779788708,-2.,5.1)); +#83633 = CIRCLE('',#83634,2.); +#83634 = AXIS2_PLACEMENT_3D('',#83635,#83636,#83637); +#83635 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83636 = DIRECTION('',(0.,0.,1.)); +#83637 = DIRECTION('',(1.,0.,-0.)); +#83638 = ORIENTED_EDGE('',*,*,#83639,.T.); +#83639 = EDGE_CURVE('',#83631,#83640,#83642,.T.); +#83640 = VERTEX_POINT('',#83641); +#83641 = CARTESIAN_POINT('',(6.4,-1.628285685709,5.1)); +#83642 = CIRCLE('',#83643,2.); +#83643 = AXIS2_PLACEMENT_3D('',#83644,#83645,#83646); +#83644 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#83645 = DIRECTION('',(0.,0.,1.)); +#83646 = DIRECTION('',(1.,0.,-0.)); +#83647 = ORIENTED_EDGE('',*,*,#83648,.F.); +#83648 = EDGE_CURVE('',#83649,#83640,#83651,.T.); +#83649 = VERTEX_POINT('',#83650); +#83650 = CARTESIAN_POINT('',(6.4,-1.628285685709,2.4)); +#83651 = LINE('',#83652,#83653); +#83652 = CARTESIAN_POINT('',(6.4,-1.628285685709,13.8)); +#83653 = VECTOR('',#83654,1.); +#83654 = DIRECTION('',(0.,0.,1.)); +#83655 = ORIENTED_EDGE('',*,*,#83656,.T.); +#83656 = EDGE_CURVE('',#83649,#83561,#83657,.T.); +#83657 = CIRCLE('',#83658,2.); +#83658 = AXIS2_PLACEMENT_3D('',#83659,#83660,#83661); +#83659 = CARTESIAN_POINT('',(5.,-0.2,2.4)); +#83660 = DIRECTION('',(0.,0.,1.)); +#83661 = DIRECTION('',(1.,0.,-0.)); +#83662 = CYLINDRICAL_SURFACE('',#83663,2.); +#83663 = AXIS2_PLACEMENT_3D('',#83664,#83665,#83666); +#83664 = CARTESIAN_POINT('',(5.,-0.2,13.8)); +#83665 = DIRECTION('',(0.,0.,1.)); +#83666 = DIRECTION('',(1.,0.,-0.)); +#83667 = ADVANCED_FACE('',(#83668),#83773,.F.); +#83668 = FACE_BOUND('',#83669,.F.); +#83669 = EDGE_LOOP('',(#83670,#83678,#83679,#83680,#83689,#83697,#83706, + #83714,#83723,#83731,#83740,#83749,#83758,#83766)); +#83670 = ORIENTED_EDGE('',*,*,#83671,.F.); +#83671 = EDGE_CURVE('',#82643,#83672,#83674,.T.); +#83672 = VERTEX_POINT('',#83673); +#83673 = CARTESIAN_POINT('',(2.,-0.2,2.4)); +#83674 = LINE('',#83675,#83676); +#83675 = CARTESIAN_POINT('',(2.,-0.2,13.8)); +#83676 = VECTOR('',#83677,1.); +#83677 = DIRECTION('',(-0.,-0.,-1.)); +#83678 = ORIENTED_EDGE('',*,*,#82642,.F.); +#83679 = ORIENTED_EDGE('',*,*,#83671,.T.); +#83680 = ORIENTED_EDGE('',*,*,#83681,.T.); +#83681 = EDGE_CURVE('',#83672,#83682,#83684,.T.); +#83682 = VERTEX_POINT('',#83683); +#83683 = CARTESIAN_POINT('',(1.4,1.228285685709,2.4)); +#83684 = CIRCLE('',#83685,2.); +#83685 = AXIS2_PLACEMENT_3D('',#83686,#83687,#83688); +#83686 = CARTESIAN_POINT('',(0.,-0.2,2.4)); +#83687 = DIRECTION('',(0.,0.,1.)); +#83688 = DIRECTION('',(1.,0.,-0.)); +#83689 = ORIENTED_EDGE('',*,*,#83690,.T.); +#83690 = EDGE_CURVE('',#83682,#83691,#83693,.T.); +#83691 = VERTEX_POINT('',#83692); +#83692 = CARTESIAN_POINT('',(1.4,1.228285685709,5.1)); +#83693 = LINE('',#83694,#83695); +#83694 = CARTESIAN_POINT('',(1.4,1.228285685709,13.8)); +#83695 = VECTOR('',#83696,1.); +#83696 = DIRECTION('',(0.,0.,1.)); +#83697 = ORIENTED_EDGE('',*,*,#83698,.T.); +#83698 = EDGE_CURVE('',#83691,#83699,#83701,.T.); +#83699 = VERTEX_POINT('',#83700); +#83700 = CARTESIAN_POINT('',(-1.4,1.228285685709,5.1)); +#83701 = CIRCLE('',#83702,2.); +#83702 = AXIS2_PLACEMENT_3D('',#83703,#83704,#83705); +#83703 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83704 = DIRECTION('',(0.,0.,1.)); +#83705 = DIRECTION('',(1.,0.,-0.)); +#83706 = ORIENTED_EDGE('',*,*,#83707,.F.); +#83707 = EDGE_CURVE('',#83708,#83699,#83710,.T.); +#83708 = VERTEX_POINT('',#83709); +#83709 = CARTESIAN_POINT('',(-1.4,1.228285685709,2.4)); +#83710 = LINE('',#83711,#83712); +#83711 = CARTESIAN_POINT('',(-1.4,1.228285685709,13.8)); +#83712 = VECTOR('',#83713,1.); +#83713 = DIRECTION('',(0.,0.,1.)); +#83714 = ORIENTED_EDGE('',*,*,#83715,.T.); +#83715 = EDGE_CURVE('',#83708,#83716,#83718,.T.); +#83716 = VERTEX_POINT('',#83717); +#83717 = CARTESIAN_POINT('',(-1.4,-1.628285685709,2.4)); +#83718 = CIRCLE('',#83719,2.); +#83719 = AXIS2_PLACEMENT_3D('',#83720,#83721,#83722); +#83720 = CARTESIAN_POINT('',(0.,-0.2,2.4)); +#83721 = DIRECTION('',(0.,0.,1.)); +#83722 = DIRECTION('',(1.,0.,-0.)); +#83723 = ORIENTED_EDGE('',*,*,#83724,.T.); +#83724 = EDGE_CURVE('',#83716,#83725,#83727,.T.); +#83725 = VERTEX_POINT('',#83726); +#83726 = CARTESIAN_POINT('',(-1.4,-1.628285685709,5.1)); +#83727 = LINE('',#83728,#83729); +#83728 = CARTESIAN_POINT('',(-1.4,-1.628285685709,13.8)); +#83729 = VECTOR('',#83730,1.); +#83730 = DIRECTION('',(0.,0.,1.)); +#83731 = ORIENTED_EDGE('',*,*,#83732,.T.); +#83732 = EDGE_CURVE('',#83725,#83733,#83735,.T.); +#83733 = VERTEX_POINT('',#83734); +#83734 = CARTESIAN_POINT('',(-0.871779788708,-2.,5.1)); +#83735 = CIRCLE('',#83736,2.); +#83736 = AXIS2_PLACEMENT_3D('',#83737,#83738,#83739); +#83737 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83738 = DIRECTION('',(0.,0.,1.)); +#83739 = DIRECTION('',(1.,0.,-0.)); +#83740 = ORIENTED_EDGE('',*,*,#83741,.T.); +#83741 = EDGE_CURVE('',#83733,#83742,#83744,.T.); +#83742 = VERTEX_POINT('',#83743); +#83743 = CARTESIAN_POINT('',(0.871779788708,-2.,5.1)); +#83744 = CIRCLE('',#83745,2.); +#83745 = AXIS2_PLACEMENT_3D('',#83746,#83747,#83748); +#83746 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83747 = DIRECTION('',(0.,0.,1.)); +#83748 = DIRECTION('',(1.,0.,-0.)); +#83749 = ORIENTED_EDGE('',*,*,#83750,.T.); +#83750 = EDGE_CURVE('',#83742,#83751,#83753,.T.); +#83751 = VERTEX_POINT('',#83752); +#83752 = CARTESIAN_POINT('',(1.4,-1.628285685709,5.1)); +#83753 = CIRCLE('',#83754,2.); +#83754 = AXIS2_PLACEMENT_3D('',#83755,#83756,#83757); +#83755 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#83756 = DIRECTION('',(0.,0.,1.)); +#83757 = DIRECTION('',(1.,0.,-0.)); +#83758 = ORIENTED_EDGE('',*,*,#83759,.F.); +#83759 = EDGE_CURVE('',#83760,#83751,#83762,.T.); +#83760 = VERTEX_POINT('',#83761); +#83761 = CARTESIAN_POINT('',(1.4,-1.628285685709,2.4)); +#83762 = LINE('',#83763,#83764); +#83763 = CARTESIAN_POINT('',(1.4,-1.628285685709,13.8)); +#83764 = VECTOR('',#83765,1.); +#83765 = DIRECTION('',(0.,0.,1.)); +#83766 = ORIENTED_EDGE('',*,*,#83767,.T.); +#83767 = EDGE_CURVE('',#83760,#83672,#83768,.T.); +#83768 = CIRCLE('',#83769,2.); +#83769 = AXIS2_PLACEMENT_3D('',#83770,#83771,#83772); +#83770 = CARTESIAN_POINT('',(0.,-0.2,2.4)); +#83771 = DIRECTION('',(0.,0.,1.)); +#83772 = DIRECTION('',(1.,0.,-0.)); +#83773 = CYLINDRICAL_SURFACE('',#83774,2.); +#83774 = AXIS2_PLACEMENT_3D('',#83775,#83776,#83777); +#83775 = CARTESIAN_POINT('',(0.,-0.2,13.8)); +#83776 = DIRECTION('',(0.,0.,1.)); +#83777 = DIRECTION('',(1.,0.,-0.)); +#83778 = ADVANCED_FACE('',(#83779),#83804,.F.); +#83779 = FACE_BOUND('',#83780,.F.); +#83780 = EDGE_LOOP('',(#83781,#83789,#83790,#83798)); +#83781 = ORIENTED_EDGE('',*,*,#83782,.F.); +#83782 = EDGE_CURVE('',#82698,#83783,#83785,.T.); +#83783 = VERTEX_POINT('',#83784); +#83784 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#83785 = LINE('',#83786,#83787); +#83786 = CARTESIAN_POINT('',(21.4,-104.6,2.4)); +#83787 = VECTOR('',#83788,1.); +#83788 = DIRECTION('',(-0.,1.,-0.)); +#83789 = ORIENTED_EDGE('',*,*,#82695,.F.); +#83790 = ORIENTED_EDGE('',*,*,#83791,.T.); +#83791 = EDGE_CURVE('',#82696,#83792,#83794,.T.); +#83792 = VERTEX_POINT('',#83793); +#83793 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#83794 = LINE('',#83795,#83796); +#83795 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#83796 = VECTOR('',#83797,1.); +#83797 = DIRECTION('',(-0.,1.,-0.)); +#83798 = ORIENTED_EDGE('',*,*,#83799,.T.); +#83799 = EDGE_CURVE('',#83792,#83783,#83800,.T.); +#83800 = LINE('',#83801,#83802); +#83801 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#83802 = VECTOR('',#83803,1.); +#83803 = DIRECTION('',(1.,0.,0.)); +#83804 = PLANE('',#83805); +#83805 = AXIS2_PLACEMENT_3D('',#83806,#83807,#83808); +#83806 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#83807 = DIRECTION('',(0.,0.,-1.)); +#83808 = DIRECTION('',(1.,0.,0.)); +#83809 = ADVANCED_FACE('',(#83810),#83828,.F.); +#83810 = FACE_BOUND('',#83811,.F.); +#83811 = EDGE_LOOP('',(#83812,#83820,#83821,#83822)); +#83812 = ORIENTED_EDGE('',*,*,#83813,.F.); +#83813 = EDGE_CURVE('',#82725,#83814,#83816,.T.); +#83814 = VERTEX_POINT('',#83815); +#83815 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#83816 = LINE('',#83817,#83818); +#83817 = CARTESIAN_POINT('',(21.4,-104.6,5.1)); +#83818 = VECTOR('',#83819,1.); +#83819 = DIRECTION('',(-0.,1.,-0.)); +#83820 = ORIENTED_EDGE('',*,*,#82724,.F.); +#83821 = ORIENTED_EDGE('',*,*,#83782,.T.); +#83822 = ORIENTED_EDGE('',*,*,#83823,.T.); +#83823 = EDGE_CURVE('',#83783,#83814,#83824,.T.); +#83824 = LINE('',#83825,#83826); +#83825 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#83826 = VECTOR('',#83827,1.); +#83827 = DIRECTION('',(0.,0.,1.)); +#83828 = PLANE('',#83829); +#83829 = AXIS2_PLACEMENT_3D('',#83830,#83831,#83832); +#83830 = CARTESIAN_POINT('',(21.4,-104.6,2.4)); +#83831 = DIRECTION('',(1.,0.,-0.)); +#83832 = DIRECTION('',(0.,0.,1.)); +#83833 = ADVANCED_FACE('',(#83834),#83852,.F.); +#83834 = FACE_BOUND('',#83835,.F.); +#83835 = EDGE_LOOP('',(#83836,#83837,#83838,#83846)); +#83836 = ORIENTED_EDGE('',*,*,#83791,.F.); +#83837 = ORIENTED_EDGE('',*,*,#82747,.F.); +#83838 = ORIENTED_EDGE('',*,*,#83839,.T.); +#83839 = EDGE_CURVE('',#82748,#83840,#83842,.T.); +#83840 = VERTEX_POINT('',#83841); +#83841 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#83842 = LINE('',#83843,#83844); +#83843 = CARTESIAN_POINT('',(18.6,-104.6,5.1)); +#83844 = VECTOR('',#83845,1.); +#83845 = DIRECTION('',(-0.,1.,-0.)); +#83846 = ORIENTED_EDGE('',*,*,#83847,.F.); +#83847 = EDGE_CURVE('',#83792,#83840,#83848,.T.); +#83848 = LINE('',#83849,#83850); +#83849 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#83850 = VECTOR('',#83851,1.); +#83851 = DIRECTION('',(0.,0.,1.)); +#83852 = PLANE('',#83853); +#83853 = AXIS2_PLACEMENT_3D('',#83854,#83855,#83856); +#83854 = CARTESIAN_POINT('',(18.6,-104.6,5.1)); +#83855 = DIRECTION('',(-1.,-0.,-0.)); +#83856 = DIRECTION('',(0.,0.,-1.)); +#83857 = ADVANCED_FACE('',(#83858),#83876,.F.); +#83858 = FACE_BOUND('',#83859,.F.); +#83859 = EDGE_LOOP('',(#83860,#83861,#83862,#83863,#83869,#83870)); +#83860 = ORIENTED_EDGE('',*,*,#83839,.F.); +#83861 = ORIENTED_EDGE('',*,*,#82770,.F.); +#83862 = ORIENTED_EDGE('',*,*,#83813,.T.); +#83863 = ORIENTED_EDGE('',*,*,#83864,.F.); +#83864 = EDGE_CURVE('',#83298,#83814,#83865,.T.); +#83865 = LINE('',#83866,#83867); +#83866 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#83867 = VECTOR('',#83868,1.); +#83868 = DIRECTION('',(1.,0.,0.)); +#83869 = ORIENTED_EDGE('',*,*,#83297,.F.); +#83870 = ORIENTED_EDGE('',*,*,#83871,.F.); +#83871 = EDGE_CURVE('',#83840,#83289,#83872,.T.); +#83872 = LINE('',#83873,#83874); +#83873 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#83874 = VECTOR('',#83875,1.); +#83875 = DIRECTION('',(1.,0.,0.)); +#83876 = PLANE('',#83877); +#83877 = AXIS2_PLACEMENT_3D('',#83878,#83879,#83880); +#83878 = CARTESIAN_POINT('',(21.4,-104.6,5.1)); +#83879 = DIRECTION('',(0.,0.,1.)); +#83880 = DIRECTION('',(-1.,0.,0.)); +#83881 = ADVANCED_FACE('',(#83882),#83907,.F.); +#83882 = FACE_BOUND('',#83883,.F.); +#83883 = EDGE_LOOP('',(#83884,#83892,#83893,#83901)); +#83884 = ORIENTED_EDGE('',*,*,#83885,.F.); +#83885 = EDGE_CURVE('',#82790,#83886,#83888,.T.); +#83886 = VERTEX_POINT('',#83887); +#83887 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#83888 = LINE('',#83889,#83890); +#83889 = CARTESIAN_POINT('',(16.4,-104.6,2.4)); +#83890 = VECTOR('',#83891,1.); +#83891 = DIRECTION('',(-0.,1.,-0.)); +#83892 = ORIENTED_EDGE('',*,*,#82787,.F.); +#83893 = ORIENTED_EDGE('',*,*,#83894,.T.); +#83894 = EDGE_CURVE('',#82788,#83895,#83897,.T.); +#83895 = VERTEX_POINT('',#83896); +#83896 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#83897 = LINE('',#83898,#83899); +#83898 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#83899 = VECTOR('',#83900,1.); +#83900 = DIRECTION('',(-0.,1.,-0.)); +#83901 = ORIENTED_EDGE('',*,*,#83902,.T.); +#83902 = EDGE_CURVE('',#83895,#83886,#83903,.T.); +#83903 = LINE('',#83904,#83905); +#83904 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#83905 = VECTOR('',#83906,1.); +#83906 = DIRECTION('',(1.,0.,0.)); +#83907 = PLANE('',#83908); +#83908 = AXIS2_PLACEMENT_3D('',#83909,#83910,#83911); +#83909 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#83910 = DIRECTION('',(0.,0.,-1.)); +#83911 = DIRECTION('',(1.,0.,0.)); +#83912 = ADVANCED_FACE('',(#83913),#83931,.F.); +#83913 = FACE_BOUND('',#83914,.F.); +#83914 = EDGE_LOOP('',(#83915,#83923,#83924,#83925)); +#83915 = ORIENTED_EDGE('',*,*,#83916,.F.); +#83916 = EDGE_CURVE('',#82817,#83917,#83919,.T.); +#83917 = VERTEX_POINT('',#83918); +#83918 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#83919 = LINE('',#83920,#83921); +#83920 = CARTESIAN_POINT('',(16.4,-104.6,5.1)); +#83921 = VECTOR('',#83922,1.); +#83922 = DIRECTION('',(-0.,1.,-0.)); +#83923 = ORIENTED_EDGE('',*,*,#82816,.F.); +#83924 = ORIENTED_EDGE('',*,*,#83885,.T.); +#83925 = ORIENTED_EDGE('',*,*,#83926,.T.); +#83926 = EDGE_CURVE('',#83886,#83917,#83927,.T.); +#83927 = LINE('',#83928,#83929); +#83928 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#83929 = VECTOR('',#83930,1.); +#83930 = DIRECTION('',(0.,0.,1.)); +#83931 = PLANE('',#83932); +#83932 = AXIS2_PLACEMENT_3D('',#83933,#83934,#83935); +#83933 = CARTESIAN_POINT('',(16.4,-104.6,2.4)); +#83934 = DIRECTION('',(1.,0.,-0.)); +#83935 = DIRECTION('',(0.,0.,1.)); +#83936 = ADVANCED_FACE('',(#83937),#83955,.F.); +#83937 = FACE_BOUND('',#83938,.F.); +#83938 = EDGE_LOOP('',(#83939,#83940,#83941,#83949)); +#83939 = ORIENTED_EDGE('',*,*,#83894,.F.); +#83940 = ORIENTED_EDGE('',*,*,#82839,.F.); +#83941 = ORIENTED_EDGE('',*,*,#83942,.T.); +#83942 = EDGE_CURVE('',#82840,#83943,#83945,.T.); +#83943 = VERTEX_POINT('',#83944); +#83944 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#83945 = LINE('',#83946,#83947); +#83946 = CARTESIAN_POINT('',(13.6,-104.6,5.1)); +#83947 = VECTOR('',#83948,1.); +#83948 = DIRECTION('',(-0.,1.,-0.)); +#83949 = ORIENTED_EDGE('',*,*,#83950,.F.); +#83950 = EDGE_CURVE('',#83895,#83943,#83951,.T.); +#83951 = LINE('',#83952,#83953); +#83952 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#83953 = VECTOR('',#83954,1.); +#83954 = DIRECTION('',(0.,0.,1.)); +#83955 = PLANE('',#83956); +#83956 = AXIS2_PLACEMENT_3D('',#83957,#83958,#83959); +#83957 = CARTESIAN_POINT('',(13.6,-104.6,5.1)); +#83958 = DIRECTION('',(-1.,-0.,-0.)); +#83959 = DIRECTION('',(0.,0.,-1.)); +#83960 = ADVANCED_FACE('',(#83961),#83979,.F.); +#83961 = FACE_BOUND('',#83962,.F.); +#83962 = EDGE_LOOP('',(#83963,#83964,#83965,#83966,#83972,#83973)); +#83963 = ORIENTED_EDGE('',*,*,#83942,.F.); +#83964 = ORIENTED_EDGE('',*,*,#82862,.F.); +#83965 = ORIENTED_EDGE('',*,*,#83916,.T.); +#83966 = ORIENTED_EDGE('',*,*,#83967,.F.); +#83967 = EDGE_CURVE('',#83409,#83917,#83968,.T.); +#83968 = LINE('',#83969,#83970); +#83969 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#83970 = VECTOR('',#83971,1.); +#83971 = DIRECTION('',(1.,0.,0.)); +#83972 = ORIENTED_EDGE('',*,*,#83408,.F.); +#83973 = ORIENTED_EDGE('',*,*,#83974,.F.); +#83974 = EDGE_CURVE('',#83943,#83400,#83975,.T.); +#83975 = LINE('',#83976,#83977); +#83976 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#83977 = VECTOR('',#83978,1.); +#83978 = DIRECTION('',(1.,0.,0.)); +#83979 = PLANE('',#83980); +#83980 = AXIS2_PLACEMENT_3D('',#83981,#83982,#83983); +#83981 = CARTESIAN_POINT('',(16.4,-104.6,5.1)); +#83982 = DIRECTION('',(0.,0.,1.)); +#83983 = DIRECTION('',(-1.,0.,0.)); +#83984 = ADVANCED_FACE('',(#83985),#84010,.F.); +#83985 = FACE_BOUND('',#83986,.F.); +#83986 = EDGE_LOOP('',(#83987,#83995,#83996,#84004)); +#83987 = ORIENTED_EDGE('',*,*,#83988,.F.); +#83988 = EDGE_CURVE('',#82882,#83989,#83991,.T.); +#83989 = VERTEX_POINT('',#83990); +#83990 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#83991 = LINE('',#83992,#83993); +#83992 = CARTESIAN_POINT('',(11.4,-104.6,2.4)); +#83993 = VECTOR('',#83994,1.); +#83994 = DIRECTION('',(-0.,1.,-0.)); +#83995 = ORIENTED_EDGE('',*,*,#82879,.F.); +#83996 = ORIENTED_EDGE('',*,*,#83997,.T.); +#83997 = EDGE_CURVE('',#82880,#83998,#84000,.T.); +#83998 = VERTEX_POINT('',#83999); +#83999 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#84000 = LINE('',#84001,#84002); +#84001 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84002 = VECTOR('',#84003,1.); +#84003 = DIRECTION('',(-0.,1.,-0.)); +#84004 = ORIENTED_EDGE('',*,*,#84005,.T.); +#84005 = EDGE_CURVE('',#83998,#83989,#84006,.T.); +#84006 = LINE('',#84007,#84008); +#84007 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#84008 = VECTOR('',#84009,1.); +#84009 = DIRECTION('',(1.,0.,0.)); +#84010 = PLANE('',#84011); +#84011 = AXIS2_PLACEMENT_3D('',#84012,#84013,#84014); +#84012 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84013 = DIRECTION('',(0.,0.,-1.)); +#84014 = DIRECTION('',(1.,0.,0.)); +#84015 = ADVANCED_FACE('',(#84016),#84034,.F.); +#84016 = FACE_BOUND('',#84017,.F.); +#84017 = EDGE_LOOP('',(#84018,#84026,#84027,#84028)); +#84018 = ORIENTED_EDGE('',*,*,#84019,.F.); +#84019 = EDGE_CURVE('',#82909,#84020,#84022,.T.); +#84020 = VERTEX_POINT('',#84021); +#84021 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84022 = LINE('',#84023,#84024); +#84023 = CARTESIAN_POINT('',(11.4,-104.6,5.1)); +#84024 = VECTOR('',#84025,1.); +#84025 = DIRECTION('',(-0.,1.,-0.)); +#84026 = ORIENTED_EDGE('',*,*,#82908,.F.); +#84027 = ORIENTED_EDGE('',*,*,#83988,.T.); +#84028 = ORIENTED_EDGE('',*,*,#84029,.T.); +#84029 = EDGE_CURVE('',#83989,#84020,#84030,.T.); +#84030 = LINE('',#84031,#84032); +#84031 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#84032 = VECTOR('',#84033,1.); +#84033 = DIRECTION('',(0.,0.,1.)); +#84034 = PLANE('',#84035); +#84035 = AXIS2_PLACEMENT_3D('',#84036,#84037,#84038); +#84036 = CARTESIAN_POINT('',(11.4,-104.6,2.4)); +#84037 = DIRECTION('',(1.,0.,-0.)); +#84038 = DIRECTION('',(0.,0.,1.)); +#84039 = ADVANCED_FACE('',(#84040),#84058,.F.); +#84040 = FACE_BOUND('',#84041,.F.); +#84041 = EDGE_LOOP('',(#84042,#84043,#84044,#84052)); +#84042 = ORIENTED_EDGE('',*,*,#83997,.F.); +#84043 = ORIENTED_EDGE('',*,*,#82931,.F.); +#84044 = ORIENTED_EDGE('',*,*,#84045,.T.); +#84045 = EDGE_CURVE('',#82932,#84046,#84048,.T.); +#84046 = VERTEX_POINT('',#84047); +#84047 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84048 = LINE('',#84049,#84050); +#84049 = CARTESIAN_POINT('',(8.6,-104.6,5.1)); +#84050 = VECTOR('',#84051,1.); +#84051 = DIRECTION('',(-0.,1.,-0.)); +#84052 = ORIENTED_EDGE('',*,*,#84053,.F.); +#84053 = EDGE_CURVE('',#83998,#84046,#84054,.T.); +#84054 = LINE('',#84055,#84056); +#84055 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#84056 = VECTOR('',#84057,1.); +#84057 = DIRECTION('',(0.,0.,1.)); +#84058 = PLANE('',#84059); +#84059 = AXIS2_PLACEMENT_3D('',#84060,#84061,#84062); +#84060 = CARTESIAN_POINT('',(8.6,-104.6,5.1)); +#84061 = DIRECTION('',(-1.,-0.,-0.)); +#84062 = DIRECTION('',(0.,0.,-1.)); +#84063 = ADVANCED_FACE('',(#84064),#84082,.F.); +#84064 = FACE_BOUND('',#84065,.F.); +#84065 = EDGE_LOOP('',(#84066,#84067,#84068,#84069,#84075,#84076)); +#84066 = ORIENTED_EDGE('',*,*,#84045,.F.); +#84067 = ORIENTED_EDGE('',*,*,#82954,.F.); +#84068 = ORIENTED_EDGE('',*,*,#84019,.T.); +#84069 = ORIENTED_EDGE('',*,*,#84070,.F.); +#84070 = EDGE_CURVE('',#83520,#84020,#84071,.T.); +#84071 = LINE('',#84072,#84073); +#84072 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84073 = VECTOR('',#84074,1.); +#84074 = DIRECTION('',(1.,0.,0.)); +#84075 = ORIENTED_EDGE('',*,*,#83519,.F.); +#84076 = ORIENTED_EDGE('',*,*,#84077,.F.); +#84077 = EDGE_CURVE('',#84046,#83511,#84078,.T.); +#84078 = LINE('',#84079,#84080); +#84079 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84080 = VECTOR('',#84081,1.); +#84081 = DIRECTION('',(1.,0.,0.)); +#84082 = PLANE('',#84083); +#84083 = AXIS2_PLACEMENT_3D('',#84084,#84085,#84086); +#84084 = CARTESIAN_POINT('',(11.4,-104.6,5.1)); +#84085 = DIRECTION('',(0.,0.,1.)); +#84086 = DIRECTION('',(-1.,0.,0.)); +#84087 = ADVANCED_FACE('',(#84088),#84113,.F.); +#84088 = FACE_BOUND('',#84089,.F.); +#84089 = EDGE_LOOP('',(#84090,#84098,#84099,#84107)); +#84090 = ORIENTED_EDGE('',*,*,#84091,.F.); +#84091 = EDGE_CURVE('',#82974,#84092,#84094,.T.); +#84092 = VERTEX_POINT('',#84093); +#84093 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84094 = LINE('',#84095,#84096); +#84095 = CARTESIAN_POINT('',(6.4,-104.6,2.4)); +#84096 = VECTOR('',#84097,1.); +#84097 = DIRECTION('',(-0.,1.,-0.)); +#84098 = ORIENTED_EDGE('',*,*,#82971,.F.); +#84099 = ORIENTED_EDGE('',*,*,#84100,.T.); +#84100 = EDGE_CURVE('',#82972,#84101,#84103,.T.); +#84101 = VERTEX_POINT('',#84102); +#84102 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#84103 = LINE('',#84104,#84105); +#84104 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84105 = VECTOR('',#84106,1.); +#84106 = DIRECTION('',(-0.,1.,-0.)); +#84107 = ORIENTED_EDGE('',*,*,#84108,.T.); +#84108 = EDGE_CURVE('',#84101,#84092,#84109,.T.); +#84109 = LINE('',#84110,#84111); +#84110 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#84111 = VECTOR('',#84112,1.); +#84112 = DIRECTION('',(1.,0.,0.)); +#84113 = PLANE('',#84114); +#84114 = AXIS2_PLACEMENT_3D('',#84115,#84116,#84117); +#84115 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84116 = DIRECTION('',(0.,0.,-1.)); +#84117 = DIRECTION('',(1.,0.,0.)); +#84118 = ADVANCED_FACE('',(#84119),#84137,.F.); +#84119 = FACE_BOUND('',#84120,.F.); +#84120 = EDGE_LOOP('',(#84121,#84129,#84130,#84131)); +#84121 = ORIENTED_EDGE('',*,*,#84122,.F.); +#84122 = EDGE_CURVE('',#83001,#84123,#84125,.T.); +#84123 = VERTEX_POINT('',#84124); +#84124 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84125 = LINE('',#84126,#84127); +#84126 = CARTESIAN_POINT('',(6.4,-104.6,5.1)); +#84127 = VECTOR('',#84128,1.); +#84128 = DIRECTION('',(-0.,1.,-0.)); +#84129 = ORIENTED_EDGE('',*,*,#83000,.F.); +#84130 = ORIENTED_EDGE('',*,*,#84091,.T.); +#84131 = ORIENTED_EDGE('',*,*,#84132,.T.); +#84132 = EDGE_CURVE('',#84092,#84123,#84133,.T.); +#84133 = LINE('',#84134,#84135); +#84134 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84135 = VECTOR('',#84136,1.); +#84136 = DIRECTION('',(0.,0.,1.)); +#84137 = PLANE('',#84138); +#84138 = AXIS2_PLACEMENT_3D('',#84139,#84140,#84141); +#84139 = CARTESIAN_POINT('',(6.4,-104.6,2.4)); +#84140 = DIRECTION('',(1.,0.,-0.)); +#84141 = DIRECTION('',(0.,0.,1.)); +#84142 = ADVANCED_FACE('',(#84143),#84161,.F.); +#84143 = FACE_BOUND('',#84144,.F.); +#84144 = EDGE_LOOP('',(#84145,#84146,#84147,#84155)); +#84145 = ORIENTED_EDGE('',*,*,#84100,.F.); +#84146 = ORIENTED_EDGE('',*,*,#83023,.F.); +#84147 = ORIENTED_EDGE('',*,*,#84148,.T.); +#84148 = EDGE_CURVE('',#83024,#84149,#84151,.T.); +#84149 = VERTEX_POINT('',#84150); +#84150 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84151 = LINE('',#84152,#84153); +#84152 = CARTESIAN_POINT('',(3.6,-104.6,5.1)); +#84153 = VECTOR('',#84154,1.); +#84154 = DIRECTION('',(-0.,1.,-0.)); +#84155 = ORIENTED_EDGE('',*,*,#84156,.F.); +#84156 = EDGE_CURVE('',#84101,#84149,#84157,.T.); +#84157 = LINE('',#84158,#84159); +#84158 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#84159 = VECTOR('',#84160,1.); +#84160 = DIRECTION('',(0.,0.,1.)); +#84161 = PLANE('',#84162); +#84162 = AXIS2_PLACEMENT_3D('',#84163,#84164,#84165); +#84163 = CARTESIAN_POINT('',(3.6,-104.6,5.1)); +#84164 = DIRECTION('',(-1.,-0.,-0.)); +#84165 = DIRECTION('',(0.,0.,-1.)); +#84166 = ADVANCED_FACE('',(#84167),#84185,.F.); +#84167 = FACE_BOUND('',#84168,.F.); +#84168 = EDGE_LOOP('',(#84169,#84170,#84171,#84172,#84178,#84179)); +#84169 = ORIENTED_EDGE('',*,*,#84148,.F.); +#84170 = ORIENTED_EDGE('',*,*,#83046,.F.); +#84171 = ORIENTED_EDGE('',*,*,#84122,.T.); +#84172 = ORIENTED_EDGE('',*,*,#84173,.F.); +#84173 = EDGE_CURVE('',#83631,#84123,#84174,.T.); +#84174 = LINE('',#84175,#84176); +#84175 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84176 = VECTOR('',#84177,1.); +#84177 = DIRECTION('',(1.,0.,0.)); +#84178 = ORIENTED_EDGE('',*,*,#83630,.F.); +#84179 = ORIENTED_EDGE('',*,*,#84180,.F.); +#84180 = EDGE_CURVE('',#84149,#83622,#84181,.T.); +#84181 = LINE('',#84182,#84183); +#84182 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84183 = VECTOR('',#84184,1.); +#84184 = DIRECTION('',(1.,0.,0.)); +#84185 = PLANE('',#84186); +#84186 = AXIS2_PLACEMENT_3D('',#84187,#84188,#84189); +#84187 = CARTESIAN_POINT('',(6.4,-104.6,5.1)); +#84188 = DIRECTION('',(0.,0.,1.)); +#84189 = DIRECTION('',(-1.,0.,0.)); +#84190 = ADVANCED_FACE('',(#84191),#84216,.F.); +#84191 = FACE_BOUND('',#84192,.F.); +#84192 = EDGE_LOOP('',(#84193,#84201,#84202,#84210)); +#84193 = ORIENTED_EDGE('',*,*,#84194,.F.); +#84194 = EDGE_CURVE('',#83066,#84195,#84197,.T.); +#84195 = VERTEX_POINT('',#84196); +#84196 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#84197 = LINE('',#84198,#84199); +#84198 = CARTESIAN_POINT('',(1.4,-104.6,2.4)); +#84199 = VECTOR('',#84200,1.); +#84200 = DIRECTION('',(-0.,1.,-0.)); +#84201 = ORIENTED_EDGE('',*,*,#83063,.F.); +#84202 = ORIENTED_EDGE('',*,*,#84203,.T.); +#84203 = EDGE_CURVE('',#83064,#84204,#84206,.T.); +#84204 = VERTEX_POINT('',#84205); +#84205 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#84206 = LINE('',#84207,#84208); +#84207 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#84208 = VECTOR('',#84209,1.); +#84209 = DIRECTION('',(-0.,1.,-0.)); +#84210 = ORIENTED_EDGE('',*,*,#84211,.T.); +#84211 = EDGE_CURVE('',#84204,#84195,#84212,.T.); +#84212 = LINE('',#84213,#84214); +#84213 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#84214 = VECTOR('',#84215,1.); +#84215 = DIRECTION('',(1.,0.,0.)); +#84216 = PLANE('',#84217); +#84217 = AXIS2_PLACEMENT_3D('',#84218,#84219,#84220); +#84218 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#84219 = DIRECTION('',(0.,0.,-1.)); +#84220 = DIRECTION('',(1.,0.,0.)); +#84221 = ADVANCED_FACE('',(#84222),#84240,.F.); +#84222 = FACE_BOUND('',#84223,.F.); +#84223 = EDGE_LOOP('',(#84224,#84232,#84233,#84234)); +#84224 = ORIENTED_EDGE('',*,*,#84225,.F.); +#84225 = EDGE_CURVE('',#83093,#84226,#84228,.T.); +#84226 = VERTEX_POINT('',#84227); +#84227 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84228 = LINE('',#84229,#84230); +#84229 = CARTESIAN_POINT('',(1.4,-104.6,5.1)); +#84230 = VECTOR('',#84231,1.); +#84231 = DIRECTION('',(-0.,1.,-0.)); +#84232 = ORIENTED_EDGE('',*,*,#83092,.F.); +#84233 = ORIENTED_EDGE('',*,*,#84194,.T.); +#84234 = ORIENTED_EDGE('',*,*,#84235,.T.); +#84235 = EDGE_CURVE('',#84195,#84226,#84236,.T.); +#84236 = LINE('',#84237,#84238); +#84237 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#84238 = VECTOR('',#84239,1.); +#84239 = DIRECTION('',(0.,0.,1.)); +#84240 = PLANE('',#84241); +#84241 = AXIS2_PLACEMENT_3D('',#84242,#84243,#84244); +#84242 = CARTESIAN_POINT('',(1.4,-104.6,2.4)); +#84243 = DIRECTION('',(1.,0.,-0.)); +#84244 = DIRECTION('',(0.,0.,1.)); +#84245 = ADVANCED_FACE('',(#84246),#84264,.F.); +#84246 = FACE_BOUND('',#84247,.F.); +#84247 = EDGE_LOOP('',(#84248,#84249,#84250,#84258)); +#84248 = ORIENTED_EDGE('',*,*,#84203,.F.); +#84249 = ORIENTED_EDGE('',*,*,#83115,.F.); +#84250 = ORIENTED_EDGE('',*,*,#84251,.T.); +#84251 = EDGE_CURVE('',#83116,#84252,#84254,.T.); +#84252 = VERTEX_POINT('',#84253); +#84253 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#84254 = LINE('',#84255,#84256); +#84255 = CARTESIAN_POINT('',(-1.4,-104.6,5.1)); +#84256 = VECTOR('',#84257,1.); +#84257 = DIRECTION('',(-0.,1.,-0.)); +#84258 = ORIENTED_EDGE('',*,*,#84259,.F.); +#84259 = EDGE_CURVE('',#84204,#84252,#84260,.T.); +#84260 = LINE('',#84261,#84262); +#84261 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#84262 = VECTOR('',#84263,1.); +#84263 = DIRECTION('',(0.,0.,1.)); +#84264 = PLANE('',#84265); +#84265 = AXIS2_PLACEMENT_3D('',#84266,#84267,#84268); +#84266 = CARTESIAN_POINT('',(-1.4,-104.6,5.1)); +#84267 = DIRECTION('',(-1.,-0.,-0.)); +#84268 = DIRECTION('',(0.,0.,-1.)); +#84269 = ADVANCED_FACE('',(#84270),#84288,.F.); +#84270 = FACE_BOUND('',#84271,.F.); +#84271 = EDGE_LOOP('',(#84272,#84273,#84274,#84275,#84281,#84282)); +#84272 = ORIENTED_EDGE('',*,*,#84251,.F.); +#84273 = ORIENTED_EDGE('',*,*,#83138,.F.); +#84274 = ORIENTED_EDGE('',*,*,#84225,.T.); +#84275 = ORIENTED_EDGE('',*,*,#84276,.F.); +#84276 = EDGE_CURVE('',#83742,#84226,#84277,.T.); +#84277 = LINE('',#84278,#84279); +#84278 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#84279 = VECTOR('',#84280,1.); +#84280 = DIRECTION('',(1.,0.,0.)); +#84281 = ORIENTED_EDGE('',*,*,#83741,.F.); +#84282 = ORIENTED_EDGE('',*,*,#84283,.F.); +#84283 = EDGE_CURVE('',#84252,#83733,#84284,.T.); +#84284 = LINE('',#84285,#84286); +#84285 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#84286 = VECTOR('',#84287,1.); +#84287 = DIRECTION('',(1.,0.,0.)); +#84288 = PLANE('',#84289); +#84289 = AXIS2_PLACEMENT_3D('',#84290,#84291,#84292); +#84290 = CARTESIAN_POINT('',(1.4,-104.6,5.1)); +#84291 = DIRECTION('',(0.,0.,1.)); +#84292 = DIRECTION('',(-1.,0.,0.)); +#84293 = ADVANCED_FACE('',(#84294),#84304,.F.); +#84294 = FACE_BOUND('',#84295,.F.); +#84295 = EDGE_LOOP('',(#84296,#84297,#84303)); +#84296 = ORIENTED_EDGE('',*,*,#83323,.F.); +#84297 = ORIENTED_EDGE('',*,*,#84298,.T.); +#84298 = EDGE_CURVE('',#83316,#83238,#84299,.T.); +#84299 = LINE('',#84300,#84301); +#84300 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#84301 = VECTOR('',#84302,1.); +#84302 = DIRECTION('',(0.,1.,0.)); +#84303 = ORIENTED_EDGE('',*,*,#83237,.F.); +#84304 = PLANE('',#84305); +#84305 = AXIS2_PLACEMENT_3D('',#84306,#84307,#84308); +#84306 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#84307 = DIRECTION('',(0.,0.,-1.)); +#84308 = DIRECTION('',(1.,0.,0.)); +#84309 = ADVANCED_FACE('',(#84310),#84337,.F.); +#84310 = FACE_BOUND('',#84311,.F.); +#84311 = EDGE_LOOP('',(#84312,#84313,#84314,#84322,#84330,#84336)); +#84312 = ORIENTED_EDGE('',*,*,#84298,.F.); +#84313 = ORIENTED_EDGE('',*,*,#83315,.T.); +#84314 = ORIENTED_EDGE('',*,*,#84315,.T.); +#84315 = EDGE_CURVE('',#83307,#84316,#84318,.T.); +#84316 = VERTEX_POINT('',#84317); +#84317 = CARTESIAN_POINT('',(21.4,-1.484523257867,5.1)); +#84318 = LINE('',#84319,#84320); +#84319 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#84320 = VECTOR('',#84321,1.); +#84321 = DIRECTION('',(0.,1.,0.)); +#84322 = ORIENTED_EDGE('',*,*,#84323,.T.); +#84323 = EDGE_CURVE('',#84316,#84324,#84326,.T.); +#84324 = VERTEX_POINT('',#84325); +#84325 = CARTESIAN_POINT('',(21.4,1.084523257867,5.1)); +#84326 = LINE('',#84327,#84328); +#84327 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#84328 = VECTOR('',#84329,1.); +#84329 = DIRECTION('',(0.,1.,0.)); +#84330 = ORIENTED_EDGE('',*,*,#84331,.T.); +#84331 = EDGE_CURVE('',#84324,#83247,#84332,.T.); +#84332 = LINE('',#84333,#84334); +#84333 = CARTESIAN_POINT('',(21.4,-2.,5.1)); +#84334 = VECTOR('',#84335,1.); +#84335 = DIRECTION('',(0.,1.,0.)); +#84336 = ORIENTED_EDGE('',*,*,#83246,.F.); +#84337 = PLANE('',#84338); +#84338 = AXIS2_PLACEMENT_3D('',#84339,#84340,#84341); +#84339 = CARTESIAN_POINT('',(21.4,-2.,2.4)); +#84340 = DIRECTION('',(-1.,0.,0.)); +#84341 = DIRECTION('',(0.,1.,0.)); +#84342 = ADVANCED_FACE('',(#84343),#84362,.T.); +#84343 = FACE_BOUND('',#84344,.T.); +#84344 = EDGE_LOOP('',(#84345,#84354,#84360,#84361)); +#84345 = ORIENTED_EDGE('',*,*,#84346,.F.); +#84346 = EDGE_CURVE('',#84347,#84316,#84349,.T.); +#84347 = VERTEX_POINT('',#84348); +#84348 = CARTESIAN_POINT('',(20.60827625303,-2.,5.1)); +#84349 = CIRCLE('',#84350,1.9); +#84350 = AXIS2_PLACEMENT_3D('',#84351,#84352,#84353); +#84351 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#84352 = DIRECTION('',(0.,0.,1.)); +#84353 = DIRECTION('',(1.,0.,-0.)); +#84354 = ORIENTED_EDGE('',*,*,#84355,.T.); +#84355 = EDGE_CURVE('',#84347,#83298,#84356,.T.); +#84356 = LINE('',#84357,#84358); +#84357 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#84358 = VECTOR('',#84359,1.); +#84359 = DIRECTION('',(1.,0.,0.)); +#84360 = ORIENTED_EDGE('',*,*,#83306,.T.); +#84361 = ORIENTED_EDGE('',*,*,#84315,.T.); +#84362 = PLANE('',#84363); +#84363 = AXIS2_PLACEMENT_3D('',#84364,#84365,#84366); +#84364 = CARTESIAN_POINT('',(20.,0.,5.1)); +#84365 = DIRECTION('',(0.,0.,1.)); +#84366 = DIRECTION('',(1.,0.,-0.)); +#84367 = ADVANCED_FACE('',(#84368),#84394,.T.); +#84368 = FACE_BOUND('',#84369,.T.); +#84369 = EDGE_LOOP('',(#84370,#84381,#84387,#84388)); +#84370 = ORIENTED_EDGE('',*,*,#84371,.F.); +#84371 = EDGE_CURVE('',#84372,#84374,#84376,.T.); +#84372 = VERTEX_POINT('',#84373); +#84373 = CARTESIAN_POINT('',(18.6,-1.484523257866,5.1)); +#84374 = VERTEX_POINT('',#84375); +#84375 = CARTESIAN_POINT('',(19.39172374697,-2.,5.1)); +#84376 = CIRCLE('',#84377,1.9); +#84377 = AXIS2_PLACEMENT_3D('',#84378,#84379,#84380); +#84378 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#84379 = DIRECTION('',(0.,0.,1.)); +#84380 = DIRECTION('',(1.,0.,-0.)); +#84381 = ORIENTED_EDGE('',*,*,#84382,.T.); +#84382 = EDGE_CURVE('',#84372,#83281,#84383,.T.); +#84383 = LINE('',#84384,#84385); +#84384 = CARTESIAN_POINT('',(18.6,2.,5.1)); +#84385 = VECTOR('',#84386,1.); +#84386 = DIRECTION('',(0.,-1.,0.)); +#84387 = ORIENTED_EDGE('',*,*,#83288,.T.); +#84388 = ORIENTED_EDGE('',*,*,#84389,.T.); +#84389 = EDGE_CURVE('',#83289,#84374,#84390,.T.); +#84390 = LINE('',#84391,#84392); +#84391 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#84392 = VECTOR('',#84393,1.); +#84393 = DIRECTION('',(1.,0.,0.)); +#84394 = PLANE('',#84395); +#84395 = AXIS2_PLACEMENT_3D('',#84396,#84397,#84398); +#84396 = CARTESIAN_POINT('',(20.,0.,5.1)); +#84397 = DIRECTION('',(0.,0.,1.)); +#84398 = DIRECTION('',(1.,0.,-0.)); +#84399 = ADVANCED_FACE('',(#84400),#84425,.F.); +#84400 = FACE_BOUND('',#84401,.F.); +#84401 = EDGE_LOOP('',(#84402,#84403,#84411,#84417,#84418,#84419)); +#84402 = ORIENTED_EDGE('',*,*,#83263,.T.); +#84403 = ORIENTED_EDGE('',*,*,#84404,.T.); +#84404 = EDGE_CURVE('',#83255,#84405,#84407,.T.); +#84405 = VERTEX_POINT('',#84406); +#84406 = CARTESIAN_POINT('',(18.6,1.084523257866,5.1)); +#84407 = LINE('',#84408,#84409); +#84408 = CARTESIAN_POINT('',(18.6,2.,5.1)); +#84409 = VECTOR('',#84410,1.); +#84410 = DIRECTION('',(0.,-1.,0.)); +#84411 = ORIENTED_EDGE('',*,*,#84412,.T.); +#84412 = EDGE_CURVE('',#84405,#84372,#84413,.T.); +#84413 = LINE('',#84414,#84415); +#84414 = CARTESIAN_POINT('',(18.6,2.,5.1)); +#84415 = VECTOR('',#84416,1.); +#84416 = DIRECTION('',(0.,-1.,0.)); +#84417 = ORIENTED_EDGE('',*,*,#84382,.T.); +#84418 = ORIENTED_EDGE('',*,*,#83280,.F.); +#84419 = ORIENTED_EDGE('',*,*,#84420,.F.); +#84420 = EDGE_CURVE('',#83264,#83272,#84421,.T.); +#84421 = LINE('',#84422,#84423); +#84422 = CARTESIAN_POINT('',(18.6,2.,2.4)); +#84423 = VECTOR('',#84424,1.); +#84424 = DIRECTION('',(0.,-1.,0.)); +#84425 = PLANE('',#84426); +#84426 = AXIS2_PLACEMENT_3D('',#84427,#84428,#84429); +#84427 = CARTESIAN_POINT('',(18.6,2.,2.4)); +#84428 = DIRECTION('',(1.,0.,-0.)); +#84429 = DIRECTION('',(0.,-1.,0.)); +#84430 = ADVANCED_FACE('',(#84431),#84435,.F.); +#84431 = FACE_BOUND('',#84432,.F.); +#84432 = EDGE_LOOP('',(#84433,#84434)); +#84433 = ORIENTED_EDGE('',*,*,#84420,.T.); +#84434 = ORIENTED_EDGE('',*,*,#83271,.F.); +#84435 = PLANE('',#84436); +#84436 = AXIS2_PLACEMENT_3D('',#84437,#84438,#84439); +#84437 = CARTESIAN_POINT('',(18.6,-104.6,2.4)); +#84438 = DIRECTION('',(0.,0.,-1.)); +#84439 = DIRECTION('',(1.,0.,0.)); +#84440 = ADVANCED_FACE('',(#84441),#84453,.T.); +#84441 = FACE_BOUND('',#84442,.T.); +#84442 = EDGE_LOOP('',(#84443,#84444,#84445,#84452)); +#84443 = ORIENTED_EDGE('',*,*,#83254,.T.); +#84444 = ORIENTED_EDGE('',*,*,#84404,.T.); +#84445 = ORIENTED_EDGE('',*,*,#84446,.F.); +#84446 = EDGE_CURVE('',#84324,#84405,#84447,.T.); +#84447 = CIRCLE('',#84448,1.9); +#84448 = AXIS2_PLACEMENT_3D('',#84449,#84450,#84451); +#84449 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#84450 = DIRECTION('',(0.,0.,1.)); +#84451 = DIRECTION('',(1.,0.,-0.)); +#84452 = ORIENTED_EDGE('',*,*,#84331,.T.); +#84453 = PLANE('',#84454); +#84454 = AXIS2_PLACEMENT_3D('',#84455,#84456,#84457); +#84455 = CARTESIAN_POINT('',(20.,0.,5.1)); +#84456 = DIRECTION('',(0.,0.,1.)); +#84457 = DIRECTION('',(1.,0.,-0.)); +#84458 = ADVANCED_FACE('',(#84459),#84469,.F.); +#84459 = FACE_BOUND('',#84460,.F.); +#84460 = EDGE_LOOP('',(#84461,#84462,#84468)); +#84461 = ORIENTED_EDGE('',*,*,#83434,.F.); +#84462 = ORIENTED_EDGE('',*,*,#84463,.T.); +#84463 = EDGE_CURVE('',#83427,#83349,#84464,.T.); +#84464 = LINE('',#84465,#84466); +#84465 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#84466 = VECTOR('',#84467,1.); +#84467 = DIRECTION('',(0.,1.,0.)); +#84468 = ORIENTED_EDGE('',*,*,#83348,.F.); +#84469 = PLANE('',#84470); +#84470 = AXIS2_PLACEMENT_3D('',#84471,#84472,#84473); +#84471 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#84472 = DIRECTION('',(0.,0.,-1.)); +#84473 = DIRECTION('',(1.,0.,0.)); +#84474 = ADVANCED_FACE('',(#84475),#84502,.F.); +#84475 = FACE_BOUND('',#84476,.F.); +#84476 = EDGE_LOOP('',(#84477,#84478,#84479,#84487,#84495,#84501)); +#84477 = ORIENTED_EDGE('',*,*,#84463,.F.); +#84478 = ORIENTED_EDGE('',*,*,#83426,.T.); +#84479 = ORIENTED_EDGE('',*,*,#84480,.T.); +#84480 = EDGE_CURVE('',#83418,#84481,#84483,.T.); +#84481 = VERTEX_POINT('',#84482); +#84482 = CARTESIAN_POINT('',(16.4,-1.484523257867,5.1)); +#84483 = LINE('',#84484,#84485); +#84484 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#84485 = VECTOR('',#84486,1.); +#84486 = DIRECTION('',(0.,1.,0.)); +#84487 = ORIENTED_EDGE('',*,*,#84488,.T.); +#84488 = EDGE_CURVE('',#84481,#84489,#84491,.T.); +#84489 = VERTEX_POINT('',#84490); +#84490 = CARTESIAN_POINT('',(16.4,1.084523257867,5.1)); +#84491 = LINE('',#84492,#84493); +#84492 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#84493 = VECTOR('',#84494,1.); +#84494 = DIRECTION('',(0.,1.,0.)); +#84495 = ORIENTED_EDGE('',*,*,#84496,.T.); +#84496 = EDGE_CURVE('',#84489,#83358,#84497,.T.); +#84497 = LINE('',#84498,#84499); +#84498 = CARTESIAN_POINT('',(16.4,-2.,5.1)); +#84499 = VECTOR('',#84500,1.); +#84500 = DIRECTION('',(0.,1.,0.)); +#84501 = ORIENTED_EDGE('',*,*,#83357,.F.); +#84502 = PLANE('',#84503); +#84503 = AXIS2_PLACEMENT_3D('',#84504,#84505,#84506); +#84504 = CARTESIAN_POINT('',(16.4,-2.,2.4)); +#84505 = DIRECTION('',(-1.,0.,0.)); +#84506 = DIRECTION('',(0.,1.,0.)); +#84507 = ADVANCED_FACE('',(#84508),#84527,.T.); +#84508 = FACE_BOUND('',#84509,.T.); +#84509 = EDGE_LOOP('',(#84510,#84519,#84525,#84526)); +#84510 = ORIENTED_EDGE('',*,*,#84511,.F.); +#84511 = EDGE_CURVE('',#84512,#84481,#84514,.T.); +#84512 = VERTEX_POINT('',#84513); +#84513 = CARTESIAN_POINT('',(15.60827625303,-2.,5.1)); +#84514 = CIRCLE('',#84515,1.9); +#84515 = AXIS2_PLACEMENT_3D('',#84516,#84517,#84518); +#84516 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#84517 = DIRECTION('',(0.,0.,1.)); +#84518 = DIRECTION('',(1.,0.,-0.)); +#84519 = ORIENTED_EDGE('',*,*,#84520,.T.); +#84520 = EDGE_CURVE('',#84512,#83409,#84521,.T.); +#84521 = LINE('',#84522,#84523); +#84522 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#84523 = VECTOR('',#84524,1.); +#84524 = DIRECTION('',(1.,0.,0.)); +#84525 = ORIENTED_EDGE('',*,*,#83417,.T.); +#84526 = ORIENTED_EDGE('',*,*,#84480,.T.); +#84527 = PLANE('',#84528); +#84528 = AXIS2_PLACEMENT_3D('',#84529,#84530,#84531); +#84529 = CARTESIAN_POINT('',(15.,0.,5.1)); +#84530 = DIRECTION('',(0.,0.,1.)); +#84531 = DIRECTION('',(1.,0.,-0.)); +#84532 = ADVANCED_FACE('',(#84533),#84559,.T.); +#84533 = FACE_BOUND('',#84534,.T.); +#84534 = EDGE_LOOP('',(#84535,#84546,#84552,#84553)); +#84535 = ORIENTED_EDGE('',*,*,#84536,.F.); +#84536 = EDGE_CURVE('',#84537,#84539,#84541,.T.); +#84537 = VERTEX_POINT('',#84538); +#84538 = CARTESIAN_POINT('',(13.6,-1.484523257866,5.1)); +#84539 = VERTEX_POINT('',#84540); +#84540 = CARTESIAN_POINT('',(14.39172374697,-2.,5.1)); +#84541 = CIRCLE('',#84542,1.9); +#84542 = AXIS2_PLACEMENT_3D('',#84543,#84544,#84545); +#84543 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#84544 = DIRECTION('',(0.,0.,1.)); +#84545 = DIRECTION('',(1.,0.,-0.)); +#84546 = ORIENTED_EDGE('',*,*,#84547,.T.); +#84547 = EDGE_CURVE('',#84537,#83392,#84548,.T.); +#84548 = LINE('',#84549,#84550); +#84549 = CARTESIAN_POINT('',(13.6,2.,5.1)); +#84550 = VECTOR('',#84551,1.); +#84551 = DIRECTION('',(0.,-1.,0.)); +#84552 = ORIENTED_EDGE('',*,*,#83399,.T.); +#84553 = ORIENTED_EDGE('',*,*,#84554,.T.); +#84554 = EDGE_CURVE('',#83400,#84539,#84555,.T.); +#84555 = LINE('',#84556,#84557); +#84556 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#84557 = VECTOR('',#84558,1.); +#84558 = DIRECTION('',(1.,0.,0.)); +#84559 = PLANE('',#84560); +#84560 = AXIS2_PLACEMENT_3D('',#84561,#84562,#84563); +#84561 = CARTESIAN_POINT('',(15.,0.,5.1)); +#84562 = DIRECTION('',(0.,0.,1.)); +#84563 = DIRECTION('',(1.,0.,-0.)); +#84564 = ADVANCED_FACE('',(#84565),#84590,.F.); +#84565 = FACE_BOUND('',#84566,.F.); +#84566 = EDGE_LOOP('',(#84567,#84568,#84576,#84582,#84583,#84584)); +#84567 = ORIENTED_EDGE('',*,*,#83374,.T.); +#84568 = ORIENTED_EDGE('',*,*,#84569,.T.); +#84569 = EDGE_CURVE('',#83366,#84570,#84572,.T.); +#84570 = VERTEX_POINT('',#84571); +#84571 = CARTESIAN_POINT('',(13.6,1.084523257866,5.1)); +#84572 = LINE('',#84573,#84574); +#84573 = CARTESIAN_POINT('',(13.6,2.,5.1)); +#84574 = VECTOR('',#84575,1.); +#84575 = DIRECTION('',(0.,-1.,0.)); +#84576 = ORIENTED_EDGE('',*,*,#84577,.T.); +#84577 = EDGE_CURVE('',#84570,#84537,#84578,.T.); +#84578 = LINE('',#84579,#84580); +#84579 = CARTESIAN_POINT('',(13.6,2.,5.1)); +#84580 = VECTOR('',#84581,1.); +#84581 = DIRECTION('',(0.,-1.,0.)); +#84582 = ORIENTED_EDGE('',*,*,#84547,.T.); +#84583 = ORIENTED_EDGE('',*,*,#83391,.F.); +#84584 = ORIENTED_EDGE('',*,*,#84585,.F.); +#84585 = EDGE_CURVE('',#83375,#83383,#84586,.T.); +#84586 = LINE('',#84587,#84588); +#84587 = CARTESIAN_POINT('',(13.6,2.,2.4)); +#84588 = VECTOR('',#84589,1.); +#84589 = DIRECTION('',(0.,-1.,0.)); +#84590 = PLANE('',#84591); +#84591 = AXIS2_PLACEMENT_3D('',#84592,#84593,#84594); +#84592 = CARTESIAN_POINT('',(13.6,2.,2.4)); +#84593 = DIRECTION('',(1.,0.,-0.)); +#84594 = DIRECTION('',(0.,-1.,0.)); +#84595 = ADVANCED_FACE('',(#84596),#84600,.F.); +#84596 = FACE_BOUND('',#84597,.F.); +#84597 = EDGE_LOOP('',(#84598,#84599)); +#84598 = ORIENTED_EDGE('',*,*,#84585,.T.); +#84599 = ORIENTED_EDGE('',*,*,#83382,.F.); +#84600 = PLANE('',#84601); +#84601 = AXIS2_PLACEMENT_3D('',#84602,#84603,#84604); +#84602 = CARTESIAN_POINT('',(13.6,-104.6,2.4)); +#84603 = DIRECTION('',(0.,0.,-1.)); +#84604 = DIRECTION('',(1.,0.,0.)); +#84605 = ADVANCED_FACE('',(#84606),#84618,.T.); +#84606 = FACE_BOUND('',#84607,.T.); +#84607 = EDGE_LOOP('',(#84608,#84609,#84610,#84617)); +#84608 = ORIENTED_EDGE('',*,*,#83365,.T.); +#84609 = ORIENTED_EDGE('',*,*,#84569,.T.); +#84610 = ORIENTED_EDGE('',*,*,#84611,.F.); +#84611 = EDGE_CURVE('',#84489,#84570,#84612,.T.); +#84612 = CIRCLE('',#84613,1.9); +#84613 = AXIS2_PLACEMENT_3D('',#84614,#84615,#84616); +#84614 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#84615 = DIRECTION('',(0.,0.,1.)); +#84616 = DIRECTION('',(1.,0.,-0.)); +#84617 = ORIENTED_EDGE('',*,*,#84496,.T.); +#84618 = PLANE('',#84619); +#84619 = AXIS2_PLACEMENT_3D('',#84620,#84621,#84622); +#84620 = CARTESIAN_POINT('',(15.,0.,5.1)); +#84621 = DIRECTION('',(0.,0.,1.)); +#84622 = DIRECTION('',(1.,0.,-0.)); +#84623 = ADVANCED_FACE('',(#84624),#84634,.F.); +#84624 = FACE_BOUND('',#84625,.F.); +#84625 = EDGE_LOOP('',(#84626,#84627,#84633)); +#84626 = ORIENTED_EDGE('',*,*,#83545,.F.); +#84627 = ORIENTED_EDGE('',*,*,#84628,.T.); +#84628 = EDGE_CURVE('',#83538,#83460,#84629,.T.); +#84629 = LINE('',#84630,#84631); +#84630 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#84631 = VECTOR('',#84632,1.); +#84632 = DIRECTION('',(0.,1.,0.)); +#84633 = ORIENTED_EDGE('',*,*,#83459,.F.); +#84634 = PLANE('',#84635); +#84635 = AXIS2_PLACEMENT_3D('',#84636,#84637,#84638); +#84636 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84637 = DIRECTION('',(0.,0.,-1.)); +#84638 = DIRECTION('',(1.,0.,0.)); +#84639 = ADVANCED_FACE('',(#84640),#84667,.F.); +#84640 = FACE_BOUND('',#84641,.F.); +#84641 = EDGE_LOOP('',(#84642,#84643,#84644,#84652,#84660,#84666)); +#84642 = ORIENTED_EDGE('',*,*,#84628,.F.); +#84643 = ORIENTED_EDGE('',*,*,#83537,.T.); +#84644 = ORIENTED_EDGE('',*,*,#84645,.T.); +#84645 = EDGE_CURVE('',#83529,#84646,#84648,.T.); +#84646 = VERTEX_POINT('',#84647); +#84647 = CARTESIAN_POINT('',(11.4,-1.484523257867,5.1)); +#84648 = LINE('',#84649,#84650); +#84649 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84650 = VECTOR('',#84651,1.); +#84651 = DIRECTION('',(0.,1.,0.)); +#84652 = ORIENTED_EDGE('',*,*,#84653,.T.); +#84653 = EDGE_CURVE('',#84646,#84654,#84656,.T.); +#84654 = VERTEX_POINT('',#84655); +#84655 = CARTESIAN_POINT('',(11.4,1.084523257867,5.1)); +#84656 = LINE('',#84657,#84658); +#84657 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84658 = VECTOR('',#84659,1.); +#84659 = DIRECTION('',(0.,1.,0.)); +#84660 = ORIENTED_EDGE('',*,*,#84661,.T.); +#84661 = EDGE_CURVE('',#84654,#83469,#84662,.T.); +#84662 = LINE('',#84663,#84664); +#84663 = CARTESIAN_POINT('',(11.4,-2.,5.1)); +#84664 = VECTOR('',#84665,1.); +#84665 = DIRECTION('',(0.,1.,0.)); +#84666 = ORIENTED_EDGE('',*,*,#83468,.F.); +#84667 = PLANE('',#84668); +#84668 = AXIS2_PLACEMENT_3D('',#84669,#84670,#84671); +#84669 = CARTESIAN_POINT('',(11.4,-2.,2.4)); +#84670 = DIRECTION('',(-1.,0.,0.)); +#84671 = DIRECTION('',(0.,1.,0.)); +#84672 = ADVANCED_FACE('',(#84673),#84692,.T.); +#84673 = FACE_BOUND('',#84674,.T.); +#84674 = EDGE_LOOP('',(#84675,#84684,#84690,#84691)); +#84675 = ORIENTED_EDGE('',*,*,#84676,.F.); +#84676 = EDGE_CURVE('',#84677,#84646,#84679,.T.); +#84677 = VERTEX_POINT('',#84678); +#84678 = CARTESIAN_POINT('',(10.60827625303,-2.,5.1)); +#84679 = CIRCLE('',#84680,1.9); +#84680 = AXIS2_PLACEMENT_3D('',#84681,#84682,#84683); +#84681 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#84682 = DIRECTION('',(0.,0.,1.)); +#84683 = DIRECTION('',(1.,0.,-0.)); +#84684 = ORIENTED_EDGE('',*,*,#84685,.T.); +#84685 = EDGE_CURVE('',#84677,#83520,#84686,.T.); +#84686 = LINE('',#84687,#84688); +#84687 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84688 = VECTOR('',#84689,1.); +#84689 = DIRECTION('',(1.,0.,0.)); +#84690 = ORIENTED_EDGE('',*,*,#83528,.T.); +#84691 = ORIENTED_EDGE('',*,*,#84645,.T.); +#84692 = PLANE('',#84693); +#84693 = AXIS2_PLACEMENT_3D('',#84694,#84695,#84696); +#84694 = CARTESIAN_POINT('',(10.,0.,5.1)); +#84695 = DIRECTION('',(0.,0.,1.)); +#84696 = DIRECTION('',(1.,0.,-0.)); +#84697 = ADVANCED_FACE('',(#84698),#84724,.T.); +#84698 = FACE_BOUND('',#84699,.T.); +#84699 = EDGE_LOOP('',(#84700,#84711,#84717,#84718)); +#84700 = ORIENTED_EDGE('',*,*,#84701,.F.); +#84701 = EDGE_CURVE('',#84702,#84704,#84706,.T.); +#84702 = VERTEX_POINT('',#84703); +#84703 = CARTESIAN_POINT('',(8.6,-1.484523257866,5.1)); +#84704 = VERTEX_POINT('',#84705); +#84705 = CARTESIAN_POINT('',(9.39172374697,-2.,5.1)); +#84706 = CIRCLE('',#84707,1.9); +#84707 = AXIS2_PLACEMENT_3D('',#84708,#84709,#84710); +#84708 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#84709 = DIRECTION('',(0.,0.,1.)); +#84710 = DIRECTION('',(1.,0.,-0.)); +#84711 = ORIENTED_EDGE('',*,*,#84712,.T.); +#84712 = EDGE_CURVE('',#84702,#83503,#84713,.T.); +#84713 = LINE('',#84714,#84715); +#84714 = CARTESIAN_POINT('',(8.6,2.,5.1)); +#84715 = VECTOR('',#84716,1.); +#84716 = DIRECTION('',(0.,-1.,0.)); +#84717 = ORIENTED_EDGE('',*,*,#83510,.T.); +#84718 = ORIENTED_EDGE('',*,*,#84719,.T.); +#84719 = EDGE_CURVE('',#83511,#84704,#84720,.T.); +#84720 = LINE('',#84721,#84722); +#84721 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#84722 = VECTOR('',#84723,1.); +#84723 = DIRECTION('',(1.,0.,0.)); +#84724 = PLANE('',#84725); +#84725 = AXIS2_PLACEMENT_3D('',#84726,#84727,#84728); +#84726 = CARTESIAN_POINT('',(10.,0.,5.1)); +#84727 = DIRECTION('',(0.,0.,1.)); +#84728 = DIRECTION('',(1.,0.,-0.)); +#84729 = ADVANCED_FACE('',(#84730),#84755,.F.); +#84730 = FACE_BOUND('',#84731,.F.); +#84731 = EDGE_LOOP('',(#84732,#84733,#84741,#84747,#84748,#84749)); +#84732 = ORIENTED_EDGE('',*,*,#83485,.T.); +#84733 = ORIENTED_EDGE('',*,*,#84734,.T.); +#84734 = EDGE_CURVE('',#83477,#84735,#84737,.T.); +#84735 = VERTEX_POINT('',#84736); +#84736 = CARTESIAN_POINT('',(8.6,1.084523257866,5.1)); +#84737 = LINE('',#84738,#84739); +#84738 = CARTESIAN_POINT('',(8.6,2.,5.1)); +#84739 = VECTOR('',#84740,1.); +#84740 = DIRECTION('',(0.,-1.,0.)); +#84741 = ORIENTED_EDGE('',*,*,#84742,.T.); +#84742 = EDGE_CURVE('',#84735,#84702,#84743,.T.); +#84743 = LINE('',#84744,#84745); +#84744 = CARTESIAN_POINT('',(8.6,2.,5.1)); +#84745 = VECTOR('',#84746,1.); +#84746 = DIRECTION('',(0.,-1.,0.)); +#84747 = ORIENTED_EDGE('',*,*,#84712,.T.); +#84748 = ORIENTED_EDGE('',*,*,#83502,.F.); +#84749 = ORIENTED_EDGE('',*,*,#84750,.F.); +#84750 = EDGE_CURVE('',#83486,#83494,#84751,.T.); +#84751 = LINE('',#84752,#84753); +#84752 = CARTESIAN_POINT('',(8.6,2.,2.4)); +#84753 = VECTOR('',#84754,1.); +#84754 = DIRECTION('',(0.,-1.,0.)); +#84755 = PLANE('',#84756); +#84756 = AXIS2_PLACEMENT_3D('',#84757,#84758,#84759); +#84757 = CARTESIAN_POINT('',(8.6,2.,2.4)); +#84758 = DIRECTION('',(1.,0.,-0.)); +#84759 = DIRECTION('',(0.,-1.,0.)); +#84760 = ADVANCED_FACE('',(#84761),#84765,.F.); +#84761 = FACE_BOUND('',#84762,.F.); +#84762 = EDGE_LOOP('',(#84763,#84764)); +#84763 = ORIENTED_EDGE('',*,*,#84750,.T.); +#84764 = ORIENTED_EDGE('',*,*,#83493,.F.); +#84765 = PLANE('',#84766); +#84766 = AXIS2_PLACEMENT_3D('',#84767,#84768,#84769); +#84767 = CARTESIAN_POINT('',(8.6,-104.6,2.4)); +#84768 = DIRECTION('',(0.,0.,-1.)); +#84769 = DIRECTION('',(1.,0.,0.)); +#84770 = ADVANCED_FACE('',(#84771),#84783,.T.); +#84771 = FACE_BOUND('',#84772,.T.); +#84772 = EDGE_LOOP('',(#84773,#84774,#84775,#84782)); +#84773 = ORIENTED_EDGE('',*,*,#83476,.T.); +#84774 = ORIENTED_EDGE('',*,*,#84734,.T.); +#84775 = ORIENTED_EDGE('',*,*,#84776,.F.); +#84776 = EDGE_CURVE('',#84654,#84735,#84777,.T.); +#84777 = CIRCLE('',#84778,1.9); +#84778 = AXIS2_PLACEMENT_3D('',#84779,#84780,#84781); +#84779 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#84780 = DIRECTION('',(0.,0.,1.)); +#84781 = DIRECTION('',(1.,0.,-0.)); +#84782 = ORIENTED_EDGE('',*,*,#84661,.T.); +#84783 = PLANE('',#84784); +#84784 = AXIS2_PLACEMENT_3D('',#84785,#84786,#84787); +#84785 = CARTESIAN_POINT('',(10.,0.,5.1)); +#84786 = DIRECTION('',(0.,0.,1.)); +#84787 = DIRECTION('',(1.,0.,-0.)); +#84788 = ADVANCED_FACE('',(#84789),#84799,.F.); +#84789 = FACE_BOUND('',#84790,.F.); +#84790 = EDGE_LOOP('',(#84791,#84792,#84798)); +#84791 = ORIENTED_EDGE('',*,*,#83656,.F.); +#84792 = ORIENTED_EDGE('',*,*,#84793,.T.); +#84793 = EDGE_CURVE('',#83649,#83571,#84794,.T.); +#84794 = LINE('',#84795,#84796); +#84795 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84796 = VECTOR('',#84797,1.); +#84797 = DIRECTION('',(0.,1.,0.)); +#84798 = ORIENTED_EDGE('',*,*,#83570,.F.); +#84799 = PLANE('',#84800); +#84800 = AXIS2_PLACEMENT_3D('',#84801,#84802,#84803); +#84801 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84802 = DIRECTION('',(0.,0.,-1.)); +#84803 = DIRECTION('',(1.,0.,0.)); +#84804 = ADVANCED_FACE('',(#84805),#84832,.F.); +#84805 = FACE_BOUND('',#84806,.F.); +#84806 = EDGE_LOOP('',(#84807,#84808,#84809,#84817,#84825,#84831)); +#84807 = ORIENTED_EDGE('',*,*,#84793,.F.); +#84808 = ORIENTED_EDGE('',*,*,#83648,.T.); +#84809 = ORIENTED_EDGE('',*,*,#84810,.T.); +#84810 = EDGE_CURVE('',#83640,#84811,#84813,.T.); +#84811 = VERTEX_POINT('',#84812); +#84812 = CARTESIAN_POINT('',(6.4,-1.484523257867,5.1)); +#84813 = LINE('',#84814,#84815); +#84814 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84815 = VECTOR('',#84816,1.); +#84816 = DIRECTION('',(0.,1.,0.)); +#84817 = ORIENTED_EDGE('',*,*,#84818,.T.); +#84818 = EDGE_CURVE('',#84811,#84819,#84821,.T.); +#84819 = VERTEX_POINT('',#84820); +#84820 = CARTESIAN_POINT('',(6.4,1.084523257867,5.1)); +#84821 = LINE('',#84822,#84823); +#84822 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84823 = VECTOR('',#84824,1.); +#84824 = DIRECTION('',(0.,1.,0.)); +#84825 = ORIENTED_EDGE('',*,*,#84826,.T.); +#84826 = EDGE_CURVE('',#84819,#83580,#84827,.T.); +#84827 = LINE('',#84828,#84829); +#84828 = CARTESIAN_POINT('',(6.4,-2.,5.1)); +#84829 = VECTOR('',#84830,1.); +#84830 = DIRECTION('',(0.,1.,0.)); +#84831 = ORIENTED_EDGE('',*,*,#83579,.F.); +#84832 = PLANE('',#84833); +#84833 = AXIS2_PLACEMENT_3D('',#84834,#84835,#84836); +#84834 = CARTESIAN_POINT('',(6.4,-2.,2.4)); +#84835 = DIRECTION('',(-1.,0.,0.)); +#84836 = DIRECTION('',(0.,1.,0.)); +#84837 = ADVANCED_FACE('',(#84838),#84857,.T.); +#84838 = FACE_BOUND('',#84839,.T.); +#84839 = EDGE_LOOP('',(#84840,#84849,#84855,#84856)); +#84840 = ORIENTED_EDGE('',*,*,#84841,.F.); +#84841 = EDGE_CURVE('',#84842,#84811,#84844,.T.); +#84842 = VERTEX_POINT('',#84843); +#84843 = CARTESIAN_POINT('',(5.60827625303,-2.,5.1)); +#84844 = CIRCLE('',#84845,1.9); +#84845 = AXIS2_PLACEMENT_3D('',#84846,#84847,#84848); +#84846 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#84847 = DIRECTION('',(0.,0.,1.)); +#84848 = DIRECTION('',(1.,0.,-0.)); +#84849 = ORIENTED_EDGE('',*,*,#84850,.T.); +#84850 = EDGE_CURVE('',#84842,#83631,#84851,.T.); +#84851 = LINE('',#84852,#84853); +#84852 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84853 = VECTOR('',#84854,1.); +#84854 = DIRECTION('',(1.,0.,0.)); +#84855 = ORIENTED_EDGE('',*,*,#83639,.T.); +#84856 = ORIENTED_EDGE('',*,*,#84810,.T.); +#84857 = PLANE('',#84858); +#84858 = AXIS2_PLACEMENT_3D('',#84859,#84860,#84861); +#84859 = CARTESIAN_POINT('',(5.,0.,5.1)); +#84860 = DIRECTION('',(0.,0.,1.)); +#84861 = DIRECTION('',(1.,0.,-0.)); +#84862 = ADVANCED_FACE('',(#84863),#84889,.T.); +#84863 = FACE_BOUND('',#84864,.T.); +#84864 = EDGE_LOOP('',(#84865,#84876,#84882,#84883)); +#84865 = ORIENTED_EDGE('',*,*,#84866,.F.); +#84866 = EDGE_CURVE('',#84867,#84869,#84871,.T.); +#84867 = VERTEX_POINT('',#84868); +#84868 = CARTESIAN_POINT('',(3.6,-1.484523257866,5.1)); +#84869 = VERTEX_POINT('',#84870); +#84870 = CARTESIAN_POINT('',(4.39172374697,-2.,5.1)); +#84871 = CIRCLE('',#84872,1.9); +#84872 = AXIS2_PLACEMENT_3D('',#84873,#84874,#84875); +#84873 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#84874 = DIRECTION('',(0.,0.,1.)); +#84875 = DIRECTION('',(1.,0.,-0.)); +#84876 = ORIENTED_EDGE('',*,*,#84877,.T.); +#84877 = EDGE_CURVE('',#84867,#83614,#84878,.T.); +#84878 = LINE('',#84879,#84880); +#84879 = CARTESIAN_POINT('',(3.6,2.,5.1)); +#84880 = VECTOR('',#84881,1.); +#84881 = DIRECTION('',(0.,-1.,0.)); +#84882 = ORIENTED_EDGE('',*,*,#83621,.T.); +#84883 = ORIENTED_EDGE('',*,*,#84884,.T.); +#84884 = EDGE_CURVE('',#83622,#84869,#84885,.T.); +#84885 = LINE('',#84886,#84887); +#84886 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#84887 = VECTOR('',#84888,1.); +#84888 = DIRECTION('',(1.,0.,0.)); +#84889 = PLANE('',#84890); +#84890 = AXIS2_PLACEMENT_3D('',#84891,#84892,#84893); +#84891 = CARTESIAN_POINT('',(5.,0.,5.1)); +#84892 = DIRECTION('',(0.,0.,1.)); +#84893 = DIRECTION('',(1.,0.,-0.)); +#84894 = ADVANCED_FACE('',(#84895),#84920,.F.); +#84895 = FACE_BOUND('',#84896,.F.); +#84896 = EDGE_LOOP('',(#84897,#84898,#84906,#84912,#84913,#84914)); +#84897 = ORIENTED_EDGE('',*,*,#83596,.T.); +#84898 = ORIENTED_EDGE('',*,*,#84899,.T.); +#84899 = EDGE_CURVE('',#83588,#84900,#84902,.T.); +#84900 = VERTEX_POINT('',#84901); +#84901 = CARTESIAN_POINT('',(3.6,1.084523257866,5.1)); +#84902 = LINE('',#84903,#84904); +#84903 = CARTESIAN_POINT('',(3.6,2.,5.1)); +#84904 = VECTOR('',#84905,1.); +#84905 = DIRECTION('',(0.,-1.,0.)); +#84906 = ORIENTED_EDGE('',*,*,#84907,.T.); +#84907 = EDGE_CURVE('',#84900,#84867,#84908,.T.); +#84908 = LINE('',#84909,#84910); +#84909 = CARTESIAN_POINT('',(3.6,2.,5.1)); +#84910 = VECTOR('',#84911,1.); +#84911 = DIRECTION('',(0.,-1.,0.)); +#84912 = ORIENTED_EDGE('',*,*,#84877,.T.); +#84913 = ORIENTED_EDGE('',*,*,#83613,.F.); +#84914 = ORIENTED_EDGE('',*,*,#84915,.F.); +#84915 = EDGE_CURVE('',#83597,#83605,#84916,.T.); +#84916 = LINE('',#84917,#84918); +#84917 = CARTESIAN_POINT('',(3.6,2.,2.4)); +#84918 = VECTOR('',#84919,1.); +#84919 = DIRECTION('',(0.,-1.,0.)); +#84920 = PLANE('',#84921); +#84921 = AXIS2_PLACEMENT_3D('',#84922,#84923,#84924); +#84922 = CARTESIAN_POINT('',(3.6,2.,2.4)); +#84923 = DIRECTION('',(1.,0.,-0.)); +#84924 = DIRECTION('',(0.,-1.,0.)); +#84925 = ADVANCED_FACE('',(#84926),#84930,.F.); +#84926 = FACE_BOUND('',#84927,.F.); +#84927 = EDGE_LOOP('',(#84928,#84929)); +#84928 = ORIENTED_EDGE('',*,*,#84915,.T.); +#84929 = ORIENTED_EDGE('',*,*,#83604,.F.); +#84930 = PLANE('',#84931); +#84931 = AXIS2_PLACEMENT_3D('',#84932,#84933,#84934); +#84932 = CARTESIAN_POINT('',(3.6,-104.6,2.4)); +#84933 = DIRECTION('',(0.,0.,-1.)); +#84934 = DIRECTION('',(1.,0.,0.)); +#84935 = ADVANCED_FACE('',(#84936),#84948,.T.); +#84936 = FACE_BOUND('',#84937,.T.); +#84937 = EDGE_LOOP('',(#84938,#84939,#84940,#84947)); +#84938 = ORIENTED_EDGE('',*,*,#83587,.T.); +#84939 = ORIENTED_EDGE('',*,*,#84899,.T.); +#84940 = ORIENTED_EDGE('',*,*,#84941,.F.); +#84941 = EDGE_CURVE('',#84819,#84900,#84942,.T.); +#84942 = CIRCLE('',#84943,1.9); +#84943 = AXIS2_PLACEMENT_3D('',#84944,#84945,#84946); +#84944 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#84945 = DIRECTION('',(0.,0.,1.)); +#84946 = DIRECTION('',(1.,0.,-0.)); +#84947 = ORIENTED_EDGE('',*,*,#84826,.T.); +#84948 = PLANE('',#84949); +#84949 = AXIS2_PLACEMENT_3D('',#84950,#84951,#84952); +#84950 = CARTESIAN_POINT('',(5.,0.,5.1)); +#84951 = DIRECTION('',(0.,0.,1.)); +#84952 = DIRECTION('',(1.,0.,-0.)); +#84953 = ADVANCED_FACE('',(#84954),#84964,.F.); +#84954 = FACE_BOUND('',#84955,.F.); +#84955 = EDGE_LOOP('',(#84956,#84957,#84963)); +#84956 = ORIENTED_EDGE('',*,*,#83767,.F.); +#84957 = ORIENTED_EDGE('',*,*,#84958,.T.); +#84958 = EDGE_CURVE('',#83760,#83682,#84959,.T.); +#84959 = LINE('',#84960,#84961); +#84960 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#84961 = VECTOR('',#84962,1.); +#84962 = DIRECTION('',(0.,1.,0.)); +#84963 = ORIENTED_EDGE('',*,*,#83681,.F.); +#84964 = PLANE('',#84965); +#84965 = AXIS2_PLACEMENT_3D('',#84966,#84967,#84968); +#84966 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#84967 = DIRECTION('',(0.,0.,-1.)); +#84968 = DIRECTION('',(1.,0.,0.)); +#84969 = ADVANCED_FACE('',(#84970),#84997,.F.); +#84970 = FACE_BOUND('',#84971,.F.); +#84971 = EDGE_LOOP('',(#84972,#84973,#84974,#84982,#84990,#84996)); +#84972 = ORIENTED_EDGE('',*,*,#84958,.F.); +#84973 = ORIENTED_EDGE('',*,*,#83759,.T.); +#84974 = ORIENTED_EDGE('',*,*,#84975,.T.); +#84975 = EDGE_CURVE('',#83751,#84976,#84978,.T.); +#84976 = VERTEX_POINT('',#84977); +#84977 = CARTESIAN_POINT('',(1.4,-1.484523257867,5.1)); +#84978 = LINE('',#84979,#84980); +#84979 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84980 = VECTOR('',#84981,1.); +#84981 = DIRECTION('',(0.,1.,0.)); +#84982 = ORIENTED_EDGE('',*,*,#84983,.T.); +#84983 = EDGE_CURVE('',#84976,#84984,#84986,.T.); +#84984 = VERTEX_POINT('',#84985); +#84985 = CARTESIAN_POINT('',(1.4,1.084523257867,5.1)); +#84986 = LINE('',#84987,#84988); +#84987 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84988 = VECTOR('',#84989,1.); +#84989 = DIRECTION('',(0.,1.,0.)); +#84990 = ORIENTED_EDGE('',*,*,#84991,.T.); +#84991 = EDGE_CURVE('',#84984,#83691,#84992,.T.); +#84992 = LINE('',#84993,#84994); +#84993 = CARTESIAN_POINT('',(1.4,-2.,5.1)); +#84994 = VECTOR('',#84995,1.); +#84995 = DIRECTION('',(0.,1.,0.)); +#84996 = ORIENTED_EDGE('',*,*,#83690,.F.); +#84997 = PLANE('',#84998); +#84998 = AXIS2_PLACEMENT_3D('',#84999,#85000,#85001); +#84999 = CARTESIAN_POINT('',(1.4,-2.,2.4)); +#85000 = DIRECTION('',(-1.,0.,0.)); +#85001 = DIRECTION('',(0.,1.,0.)); +#85002 = ADVANCED_FACE('',(#85003),#85022,.T.); +#85003 = FACE_BOUND('',#85004,.T.); +#85004 = EDGE_LOOP('',(#85005,#85014,#85020,#85021)); +#85005 = ORIENTED_EDGE('',*,*,#85006,.F.); +#85006 = EDGE_CURVE('',#85007,#84976,#85009,.T.); +#85007 = VERTEX_POINT('',#85008); +#85008 = CARTESIAN_POINT('',(0.60827625303,-2.,5.1)); +#85009 = CIRCLE('',#85010,1.9); +#85010 = AXIS2_PLACEMENT_3D('',#85011,#85012,#85013); +#85011 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85012 = DIRECTION('',(0.,0.,1.)); +#85013 = DIRECTION('',(1.,0.,-0.)); +#85014 = ORIENTED_EDGE('',*,*,#85015,.T.); +#85015 = EDGE_CURVE('',#85007,#83742,#85016,.T.); +#85016 = LINE('',#85017,#85018); +#85017 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#85018 = VECTOR('',#85019,1.); +#85019 = DIRECTION('',(1.,0.,0.)); +#85020 = ORIENTED_EDGE('',*,*,#83750,.T.); +#85021 = ORIENTED_EDGE('',*,*,#84975,.T.); +#85022 = PLANE('',#85023); +#85023 = AXIS2_PLACEMENT_3D('',#85024,#85025,#85026); +#85024 = CARTESIAN_POINT('',(0.,0.,5.1)); +#85025 = DIRECTION('',(0.,0.,1.)); +#85026 = DIRECTION('',(1.,0.,-0.)); +#85027 = ADVANCED_FACE('',(#85028),#85054,.T.); +#85028 = FACE_BOUND('',#85029,.T.); +#85029 = EDGE_LOOP('',(#85030,#85041,#85047,#85048)); +#85030 = ORIENTED_EDGE('',*,*,#85031,.F.); +#85031 = EDGE_CURVE('',#85032,#85034,#85036,.T.); +#85032 = VERTEX_POINT('',#85033); +#85033 = CARTESIAN_POINT('',(-1.4,-1.484523257866,5.1)); +#85034 = VERTEX_POINT('',#85035); +#85035 = CARTESIAN_POINT('',(-0.60827625303,-2.,5.1)); +#85036 = CIRCLE('',#85037,1.9); +#85037 = AXIS2_PLACEMENT_3D('',#85038,#85039,#85040); +#85038 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85039 = DIRECTION('',(0.,0.,1.)); +#85040 = DIRECTION('',(1.,0.,-0.)); +#85041 = ORIENTED_EDGE('',*,*,#85042,.T.); +#85042 = EDGE_CURVE('',#85032,#83725,#85043,.T.); +#85043 = LINE('',#85044,#85045); +#85044 = CARTESIAN_POINT('',(-1.4,2.,5.1)); +#85045 = VECTOR('',#85046,1.); +#85046 = DIRECTION('',(0.,-1.,0.)); +#85047 = ORIENTED_EDGE('',*,*,#83732,.T.); +#85048 = ORIENTED_EDGE('',*,*,#85049,.T.); +#85049 = EDGE_CURVE('',#83733,#85034,#85050,.T.); +#85050 = LINE('',#85051,#85052); +#85051 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#85052 = VECTOR('',#85053,1.); +#85053 = DIRECTION('',(1.,0.,0.)); +#85054 = PLANE('',#85055); +#85055 = AXIS2_PLACEMENT_3D('',#85056,#85057,#85058); +#85056 = CARTESIAN_POINT('',(0.,0.,5.1)); +#85057 = DIRECTION('',(0.,0.,1.)); +#85058 = DIRECTION('',(1.,0.,-0.)); +#85059 = ADVANCED_FACE('',(#85060),#85085,.F.); +#85060 = FACE_BOUND('',#85061,.F.); +#85061 = EDGE_LOOP('',(#85062,#85063,#85071,#85077,#85078,#85079)); +#85062 = ORIENTED_EDGE('',*,*,#83707,.T.); +#85063 = ORIENTED_EDGE('',*,*,#85064,.T.); +#85064 = EDGE_CURVE('',#83699,#85065,#85067,.T.); +#85065 = VERTEX_POINT('',#85066); +#85066 = CARTESIAN_POINT('',(-1.4,1.084523257866,5.1)); +#85067 = LINE('',#85068,#85069); +#85068 = CARTESIAN_POINT('',(-1.4,2.,5.1)); +#85069 = VECTOR('',#85070,1.); +#85070 = DIRECTION('',(0.,-1.,0.)); +#85071 = ORIENTED_EDGE('',*,*,#85072,.T.); +#85072 = EDGE_CURVE('',#85065,#85032,#85073,.T.); +#85073 = LINE('',#85074,#85075); +#85074 = CARTESIAN_POINT('',(-1.4,2.,5.1)); +#85075 = VECTOR('',#85076,1.); +#85076 = DIRECTION('',(0.,-1.,0.)); +#85077 = ORIENTED_EDGE('',*,*,#85042,.T.); +#85078 = ORIENTED_EDGE('',*,*,#83724,.F.); +#85079 = ORIENTED_EDGE('',*,*,#85080,.F.); +#85080 = EDGE_CURVE('',#83708,#83716,#85081,.T.); +#85081 = LINE('',#85082,#85083); +#85082 = CARTESIAN_POINT('',(-1.4,2.,2.4)); +#85083 = VECTOR('',#85084,1.); +#85084 = DIRECTION('',(0.,-1.,0.)); +#85085 = PLANE('',#85086); +#85086 = AXIS2_PLACEMENT_3D('',#85087,#85088,#85089); +#85087 = CARTESIAN_POINT('',(-1.4,2.,2.4)); +#85088 = DIRECTION('',(1.,0.,-0.)); +#85089 = DIRECTION('',(0.,-1.,0.)); +#85090 = ADVANCED_FACE('',(#85091),#85095,.F.); +#85091 = FACE_BOUND('',#85092,.F.); +#85092 = EDGE_LOOP('',(#85093,#85094)); +#85093 = ORIENTED_EDGE('',*,*,#85080,.T.); +#85094 = ORIENTED_EDGE('',*,*,#83715,.F.); +#85095 = PLANE('',#85096); +#85096 = AXIS2_PLACEMENT_3D('',#85097,#85098,#85099); +#85097 = CARTESIAN_POINT('',(-1.4,-104.6,2.4)); +#85098 = DIRECTION('',(0.,0.,-1.)); +#85099 = DIRECTION('',(1.,0.,0.)); +#85100 = ADVANCED_FACE('',(#85101),#85113,.T.); +#85101 = FACE_BOUND('',#85102,.T.); +#85102 = EDGE_LOOP('',(#85103,#85104,#85105,#85112)); +#85103 = ORIENTED_EDGE('',*,*,#83698,.T.); +#85104 = ORIENTED_EDGE('',*,*,#85064,.T.); +#85105 = ORIENTED_EDGE('',*,*,#85106,.F.); +#85106 = EDGE_CURVE('',#84984,#85065,#85107,.T.); +#85107 = CIRCLE('',#85108,1.9); +#85108 = AXIS2_PLACEMENT_3D('',#85109,#85110,#85111); +#85109 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85110 = DIRECTION('',(0.,0.,1.)); +#85111 = DIRECTION('',(1.,0.,-0.)); +#85112 = ORIENTED_EDGE('',*,*,#84991,.T.); +#85113 = PLANE('',#85114); +#85114 = AXIS2_PLACEMENT_3D('',#85115,#85116,#85117); +#85115 = CARTESIAN_POINT('',(0.,0.,5.1)); +#85116 = DIRECTION('',(0.,0.,1.)); +#85117 = DIRECTION('',(1.,0.,-0.)); +#85118 = ADVANCED_FACE('',(#85119,#85134),#85168,.F.); +#85119 = FACE_BOUND('',#85120,.F.); +#85120 = EDGE_LOOP('',(#85121,#85122,#85123,#85124,#85130,#85131,#85132, + #85133)); +#85121 = ORIENTED_EDGE('',*,*,#83847,.T.); +#85122 = ORIENTED_EDGE('',*,*,#83871,.T.); +#85123 = ORIENTED_EDGE('',*,*,#84389,.T.); +#85124 = ORIENTED_EDGE('',*,*,#85125,.T.); +#85125 = EDGE_CURVE('',#84374,#84347,#85126,.T.); +#85126 = LINE('',#85127,#85128); +#85127 = CARTESIAN_POINT('',(18.6,-2.,5.1)); +#85128 = VECTOR('',#85129,1.); +#85129 = DIRECTION('',(1.,0.,0.)); +#85130 = ORIENTED_EDGE('',*,*,#84355,.T.); +#85131 = ORIENTED_EDGE('',*,*,#83864,.T.); +#85132 = ORIENTED_EDGE('',*,*,#83823,.F.); +#85133 = ORIENTED_EDGE('',*,*,#83799,.F.); +#85134 = FACE_BOUND('',#85135,.F.); +#85135 = EDGE_LOOP('',(#85136,#85146,#85154,#85162)); +#85136 = ORIENTED_EDGE('',*,*,#85137,.T.); +#85137 = EDGE_CURVE('',#85138,#85140,#85142,.T.); +#85138 = VERTEX_POINT('',#85139); +#85139 = CARTESIAN_POINT('',(18.75,-2.,5.)); +#85140 = VERTEX_POINT('',#85141); +#85141 = CARTESIAN_POINT('',(18.75,-2.,2.5)); +#85142 = LINE('',#85143,#85144); +#85143 = CARTESIAN_POINT('',(18.75,-2.,5.)); +#85144 = VECTOR('',#85145,1.); +#85145 = DIRECTION('',(0.,0.,-1.)); +#85146 = ORIENTED_EDGE('',*,*,#85147,.T.); +#85147 = EDGE_CURVE('',#85140,#85148,#85150,.T.); +#85148 = VERTEX_POINT('',#85149); +#85149 = CARTESIAN_POINT('',(21.25,-2.,2.5)); +#85150 = LINE('',#85151,#85152); +#85151 = CARTESIAN_POINT('',(18.75,-2.,2.5)); +#85152 = VECTOR('',#85153,1.); +#85153 = DIRECTION('',(1.,0.,0.)); +#85154 = ORIENTED_EDGE('',*,*,#85155,.T.); +#85155 = EDGE_CURVE('',#85148,#85156,#85158,.T.); +#85156 = VERTEX_POINT('',#85157); +#85157 = CARTESIAN_POINT('',(21.25,-2.,5.)); +#85158 = LINE('',#85159,#85160); +#85159 = CARTESIAN_POINT('',(21.25,-2.,2.5)); +#85160 = VECTOR('',#85161,1.); +#85161 = DIRECTION('',(0.,0.,1.)); +#85162 = ORIENTED_EDGE('',*,*,#85163,.T.); +#85163 = EDGE_CURVE('',#85156,#85138,#85164,.T.); +#85164 = LINE('',#85165,#85166); +#85165 = CARTESIAN_POINT('',(21.25,-2.,5.)); +#85166 = VECTOR('',#85167,1.); +#85167 = DIRECTION('',(-1.,0.,0.)); +#85168 = PLANE('',#85169); +#85169 = AXIS2_PLACEMENT_3D('',#85170,#85171,#85172); +#85170 = CARTESIAN_POINT('',(18.6,-2.,2.4)); +#85171 = DIRECTION('',(0.,1.,0.)); +#85172 = DIRECTION('',(1.,0.,0.)); +#85173 = ADVANCED_FACE('',(#85174,#85189),#85223,.F.); +#85174 = FACE_BOUND('',#85175,.F.); +#85175 = EDGE_LOOP('',(#85176,#85177,#85178,#85179,#85185,#85186,#85187, + #85188)); +#85176 = ORIENTED_EDGE('',*,*,#83950,.T.); +#85177 = ORIENTED_EDGE('',*,*,#83974,.T.); +#85178 = ORIENTED_EDGE('',*,*,#84554,.T.); +#85179 = ORIENTED_EDGE('',*,*,#85180,.T.); +#85180 = EDGE_CURVE('',#84539,#84512,#85181,.T.); +#85181 = LINE('',#85182,#85183); +#85182 = CARTESIAN_POINT('',(13.6,-2.,5.1)); +#85183 = VECTOR('',#85184,1.); +#85184 = DIRECTION('',(1.,0.,0.)); +#85185 = ORIENTED_EDGE('',*,*,#84520,.T.); +#85186 = ORIENTED_EDGE('',*,*,#83967,.T.); +#85187 = ORIENTED_EDGE('',*,*,#83926,.F.); +#85188 = ORIENTED_EDGE('',*,*,#83902,.F.); +#85189 = FACE_BOUND('',#85190,.F.); +#85190 = EDGE_LOOP('',(#85191,#85201,#85209,#85217)); +#85191 = ORIENTED_EDGE('',*,*,#85192,.T.); +#85192 = EDGE_CURVE('',#85193,#85195,#85197,.T.); +#85193 = VERTEX_POINT('',#85194); +#85194 = CARTESIAN_POINT('',(13.75,-2.,5.)); +#85195 = VERTEX_POINT('',#85196); +#85196 = CARTESIAN_POINT('',(13.75,-2.,2.5)); +#85197 = LINE('',#85198,#85199); +#85198 = CARTESIAN_POINT('',(13.75,-2.,5.)); +#85199 = VECTOR('',#85200,1.); +#85200 = DIRECTION('',(0.,0.,-1.)); +#85201 = ORIENTED_EDGE('',*,*,#85202,.T.); +#85202 = EDGE_CURVE('',#85195,#85203,#85205,.T.); +#85203 = VERTEX_POINT('',#85204); +#85204 = CARTESIAN_POINT('',(16.25,-2.,2.5)); +#85205 = LINE('',#85206,#85207); +#85206 = CARTESIAN_POINT('',(13.75,-2.,2.5)); +#85207 = VECTOR('',#85208,1.); +#85208 = DIRECTION('',(1.,0.,0.)); +#85209 = ORIENTED_EDGE('',*,*,#85210,.T.); +#85210 = EDGE_CURVE('',#85203,#85211,#85213,.T.); +#85211 = VERTEX_POINT('',#85212); +#85212 = CARTESIAN_POINT('',(16.25,-2.,5.)); +#85213 = LINE('',#85214,#85215); +#85214 = CARTESIAN_POINT('',(16.25,-2.,2.5)); +#85215 = VECTOR('',#85216,1.); +#85216 = DIRECTION('',(0.,0.,1.)); +#85217 = ORIENTED_EDGE('',*,*,#85218,.T.); +#85218 = EDGE_CURVE('',#85211,#85193,#85219,.T.); +#85219 = LINE('',#85220,#85221); +#85220 = CARTESIAN_POINT('',(16.25,-2.,5.)); +#85221 = VECTOR('',#85222,1.); +#85222 = DIRECTION('',(-1.,0.,0.)); +#85223 = PLANE('',#85224); +#85224 = AXIS2_PLACEMENT_3D('',#85225,#85226,#85227); +#85225 = CARTESIAN_POINT('',(13.6,-2.,2.4)); +#85226 = DIRECTION('',(0.,1.,0.)); +#85227 = DIRECTION('',(1.,0.,0.)); +#85228 = ADVANCED_FACE('',(#85229,#85244),#85278,.F.); +#85229 = FACE_BOUND('',#85230,.F.); +#85230 = EDGE_LOOP('',(#85231,#85232,#85233,#85234,#85240,#85241,#85242, + #85243)); +#85231 = ORIENTED_EDGE('',*,*,#84053,.T.); +#85232 = ORIENTED_EDGE('',*,*,#84077,.T.); +#85233 = ORIENTED_EDGE('',*,*,#84719,.T.); +#85234 = ORIENTED_EDGE('',*,*,#85235,.T.); +#85235 = EDGE_CURVE('',#84704,#84677,#85236,.T.); +#85236 = LINE('',#85237,#85238); +#85237 = CARTESIAN_POINT('',(8.6,-2.,5.1)); +#85238 = VECTOR('',#85239,1.); +#85239 = DIRECTION('',(1.,0.,0.)); +#85240 = ORIENTED_EDGE('',*,*,#84685,.T.); +#85241 = ORIENTED_EDGE('',*,*,#84070,.T.); +#85242 = ORIENTED_EDGE('',*,*,#84029,.F.); +#85243 = ORIENTED_EDGE('',*,*,#84005,.F.); +#85244 = FACE_BOUND('',#85245,.F.); +#85245 = EDGE_LOOP('',(#85246,#85256,#85264,#85272)); +#85246 = ORIENTED_EDGE('',*,*,#85247,.T.); +#85247 = EDGE_CURVE('',#85248,#85250,#85252,.T.); +#85248 = VERTEX_POINT('',#85249); +#85249 = CARTESIAN_POINT('',(8.75,-2.,5.)); +#85250 = VERTEX_POINT('',#85251); +#85251 = CARTESIAN_POINT('',(8.75,-2.,2.5)); +#85252 = LINE('',#85253,#85254); +#85253 = CARTESIAN_POINT('',(8.75,-2.,5.)); +#85254 = VECTOR('',#85255,1.); +#85255 = DIRECTION('',(0.,0.,-1.)); +#85256 = ORIENTED_EDGE('',*,*,#85257,.T.); +#85257 = EDGE_CURVE('',#85250,#85258,#85260,.T.); +#85258 = VERTEX_POINT('',#85259); +#85259 = CARTESIAN_POINT('',(11.25,-2.,2.5)); +#85260 = LINE('',#85261,#85262); +#85261 = CARTESIAN_POINT('',(8.75,-2.,2.5)); +#85262 = VECTOR('',#85263,1.); +#85263 = DIRECTION('',(1.,0.,0.)); +#85264 = ORIENTED_EDGE('',*,*,#85265,.T.); +#85265 = EDGE_CURVE('',#85258,#85266,#85268,.T.); +#85266 = VERTEX_POINT('',#85267); +#85267 = CARTESIAN_POINT('',(11.25,-2.,5.)); +#85268 = LINE('',#85269,#85270); +#85269 = CARTESIAN_POINT('',(11.25,-2.,2.5)); +#85270 = VECTOR('',#85271,1.); +#85271 = DIRECTION('',(0.,0.,1.)); +#85272 = ORIENTED_EDGE('',*,*,#85273,.T.); +#85273 = EDGE_CURVE('',#85266,#85248,#85274,.T.); +#85274 = LINE('',#85275,#85276); +#85275 = CARTESIAN_POINT('',(11.25,-2.,5.)); +#85276 = VECTOR('',#85277,1.); +#85277 = DIRECTION('',(-1.,0.,0.)); +#85278 = PLANE('',#85279); +#85279 = AXIS2_PLACEMENT_3D('',#85280,#85281,#85282); +#85280 = CARTESIAN_POINT('',(8.6,-2.,2.4)); +#85281 = DIRECTION('',(0.,1.,0.)); +#85282 = DIRECTION('',(1.,0.,0.)); +#85283 = ADVANCED_FACE('',(#85284,#85299),#85333,.F.); +#85284 = FACE_BOUND('',#85285,.F.); +#85285 = EDGE_LOOP('',(#85286,#85287,#85288,#85289,#85295,#85296,#85297, + #85298)); +#85286 = ORIENTED_EDGE('',*,*,#84156,.T.); +#85287 = ORIENTED_EDGE('',*,*,#84180,.T.); +#85288 = ORIENTED_EDGE('',*,*,#84884,.T.); +#85289 = ORIENTED_EDGE('',*,*,#85290,.T.); +#85290 = EDGE_CURVE('',#84869,#84842,#85291,.T.); +#85291 = LINE('',#85292,#85293); +#85292 = CARTESIAN_POINT('',(3.6,-2.,5.1)); +#85293 = VECTOR('',#85294,1.); +#85294 = DIRECTION('',(1.,0.,0.)); +#85295 = ORIENTED_EDGE('',*,*,#84850,.T.); +#85296 = ORIENTED_EDGE('',*,*,#84173,.T.); +#85297 = ORIENTED_EDGE('',*,*,#84132,.F.); +#85298 = ORIENTED_EDGE('',*,*,#84108,.F.); +#85299 = FACE_BOUND('',#85300,.F.); +#85300 = EDGE_LOOP('',(#85301,#85311,#85319,#85327)); +#85301 = ORIENTED_EDGE('',*,*,#85302,.T.); +#85302 = EDGE_CURVE('',#85303,#85305,#85307,.T.); +#85303 = VERTEX_POINT('',#85304); +#85304 = CARTESIAN_POINT('',(3.75,-2.,5.)); +#85305 = VERTEX_POINT('',#85306); +#85306 = CARTESIAN_POINT('',(3.75,-2.,2.5)); +#85307 = LINE('',#85308,#85309); +#85308 = CARTESIAN_POINT('',(3.75,-2.,5.)); +#85309 = VECTOR('',#85310,1.); +#85310 = DIRECTION('',(0.,0.,-1.)); +#85311 = ORIENTED_EDGE('',*,*,#85312,.T.); +#85312 = EDGE_CURVE('',#85305,#85313,#85315,.T.); +#85313 = VERTEX_POINT('',#85314); +#85314 = CARTESIAN_POINT('',(6.25,-2.,2.5)); +#85315 = LINE('',#85316,#85317); +#85316 = CARTESIAN_POINT('',(3.75,-2.,2.5)); +#85317 = VECTOR('',#85318,1.); +#85318 = DIRECTION('',(1.,0.,0.)); +#85319 = ORIENTED_EDGE('',*,*,#85320,.T.); +#85320 = EDGE_CURVE('',#85313,#85321,#85323,.T.); +#85321 = VERTEX_POINT('',#85322); +#85322 = CARTESIAN_POINT('',(6.25,-2.,5.)); +#85323 = LINE('',#85324,#85325); +#85324 = CARTESIAN_POINT('',(6.25,-2.,2.5)); +#85325 = VECTOR('',#85326,1.); +#85326 = DIRECTION('',(0.,0.,1.)); +#85327 = ORIENTED_EDGE('',*,*,#85328,.T.); +#85328 = EDGE_CURVE('',#85321,#85303,#85329,.T.); +#85329 = LINE('',#85330,#85331); +#85330 = CARTESIAN_POINT('',(6.25,-2.,5.)); +#85331 = VECTOR('',#85332,1.); +#85332 = DIRECTION('',(-1.,0.,0.)); +#85333 = PLANE('',#85334); +#85334 = AXIS2_PLACEMENT_3D('',#85335,#85336,#85337); +#85335 = CARTESIAN_POINT('',(3.6,-2.,2.4)); +#85336 = DIRECTION('',(0.,1.,0.)); +#85337 = DIRECTION('',(1.,0.,0.)); +#85338 = ADVANCED_FACE('',(#85339,#85354),#85388,.F.); +#85339 = FACE_BOUND('',#85340,.F.); +#85340 = EDGE_LOOP('',(#85341,#85342,#85343,#85344,#85350,#85351,#85352, + #85353)); +#85341 = ORIENTED_EDGE('',*,*,#84259,.T.); +#85342 = ORIENTED_EDGE('',*,*,#84283,.T.); +#85343 = ORIENTED_EDGE('',*,*,#85049,.T.); +#85344 = ORIENTED_EDGE('',*,*,#85345,.T.); +#85345 = EDGE_CURVE('',#85034,#85007,#85346,.T.); +#85346 = LINE('',#85347,#85348); +#85347 = CARTESIAN_POINT('',(-1.4,-2.,5.1)); +#85348 = VECTOR('',#85349,1.); +#85349 = DIRECTION('',(1.,0.,0.)); +#85350 = ORIENTED_EDGE('',*,*,#85015,.T.); +#85351 = ORIENTED_EDGE('',*,*,#84276,.T.); +#85352 = ORIENTED_EDGE('',*,*,#84235,.F.); +#85353 = ORIENTED_EDGE('',*,*,#84211,.F.); +#85354 = FACE_BOUND('',#85355,.F.); +#85355 = EDGE_LOOP('',(#85356,#85366,#85374,#85382)); +#85356 = ORIENTED_EDGE('',*,*,#85357,.T.); +#85357 = EDGE_CURVE('',#85358,#85360,#85362,.T.); +#85358 = VERTEX_POINT('',#85359); +#85359 = CARTESIAN_POINT('',(-1.25,-2.,5.)); +#85360 = VERTEX_POINT('',#85361); +#85361 = CARTESIAN_POINT('',(-1.25,-2.,2.5)); +#85362 = LINE('',#85363,#85364); +#85363 = CARTESIAN_POINT('',(-1.25,-2.,5.)); +#85364 = VECTOR('',#85365,1.); +#85365 = DIRECTION('',(0.,0.,-1.)); +#85366 = ORIENTED_EDGE('',*,*,#85367,.T.); +#85367 = EDGE_CURVE('',#85360,#85368,#85370,.T.); +#85368 = VERTEX_POINT('',#85369); +#85369 = CARTESIAN_POINT('',(1.25,-2.,2.5)); +#85370 = LINE('',#85371,#85372); +#85371 = CARTESIAN_POINT('',(-1.25,-2.,2.5)); +#85372 = VECTOR('',#85373,1.); +#85373 = DIRECTION('',(1.,0.,0.)); +#85374 = ORIENTED_EDGE('',*,*,#85375,.T.); +#85375 = EDGE_CURVE('',#85368,#85376,#85378,.T.); +#85376 = VERTEX_POINT('',#85377); +#85377 = CARTESIAN_POINT('',(1.25,-2.,5.)); +#85378 = LINE('',#85379,#85380); +#85379 = CARTESIAN_POINT('',(1.25,-2.,2.5)); +#85380 = VECTOR('',#85381,1.); +#85381 = DIRECTION('',(0.,0.,1.)); +#85382 = ORIENTED_EDGE('',*,*,#85383,.T.); +#85383 = EDGE_CURVE('',#85376,#85358,#85384,.T.); +#85384 = LINE('',#85385,#85386); +#85385 = CARTESIAN_POINT('',(1.25,-2.,5.)); +#85386 = VECTOR('',#85387,1.); +#85387 = DIRECTION('',(-1.,0.,0.)); +#85388 = PLANE('',#85389); +#85389 = AXIS2_PLACEMENT_3D('',#85390,#85391,#85392); +#85390 = CARTESIAN_POINT('',(-1.4,-2.,2.4)); +#85391 = DIRECTION('',(0.,1.,0.)); +#85392 = DIRECTION('',(1.,0.,0.)); +#85393 = ADVANCED_FACE('',(#85394),#85413,.F.); +#85394 = FACE_BOUND('',#85395,.F.); +#85395 = EDGE_LOOP('',(#85396,#85405,#85412)); +#85396 = ORIENTED_EDGE('',*,*,#85397,.T.); +#85397 = EDGE_CURVE('',#84316,#85398,#85400,.T.); +#85398 = VERTEX_POINT('',#85399); +#85399 = CARTESIAN_POINT('',(21.9,-0.2,5.1)); +#85400 = CIRCLE('',#85401,1.9); +#85401 = AXIS2_PLACEMENT_3D('',#85402,#85403,#85404); +#85402 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85403 = DIRECTION('',(0.,0.,1.)); +#85404 = DIRECTION('',(1.,0.,-0.)); +#85405 = ORIENTED_EDGE('',*,*,#85406,.T.); +#85406 = EDGE_CURVE('',#85398,#84324,#85407,.T.); +#85407 = CIRCLE('',#85408,1.9); +#85408 = AXIS2_PLACEMENT_3D('',#85409,#85410,#85411); +#85409 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85410 = DIRECTION('',(0.,0.,1.)); +#85411 = DIRECTION('',(1.,0.,-0.)); +#85412 = ORIENTED_EDGE('',*,*,#84323,.F.); +#85413 = PLANE('',#85414); +#85414 = AXIS2_PLACEMENT_3D('',#85415,#85416,#85417); +#85415 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85416 = DIRECTION('',(0.,0.,1.)); +#85417 = DIRECTION('',(1.,0.,-0.)); +#85418 = ADVANCED_FACE('',(#85419),#85524,.T.); +#85419 = FACE_BOUND('',#85420,.T.); +#85420 = EDGE_LOOP('',(#85421,#85432,#85440,#85449,#85457,#85466,#85474, + #85483,#85491,#85498,#85504,#85505,#85506,#85513,#85514,#85521, + #85522,#85523)); +#85421 = ORIENTED_EDGE('',*,*,#85422,.F.); +#85422 = EDGE_CURVE('',#85423,#85425,#85427,.T.); +#85423 = VERTEX_POINT('',#85424); +#85424 = CARTESIAN_POINT('',(20.35,-2.067484939698,13.6)); +#85425 = VERTEX_POINT('',#85426); +#85426 = CARTESIAN_POINT('',(21.9,-0.2,13.6)); +#85427 = CIRCLE('',#85428,1.9); +#85428 = AXIS2_PLACEMENT_3D('',#85429,#85430,#85431); +#85429 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#85430 = DIRECTION('',(0.,0.,1.)); +#85431 = DIRECTION('',(1.,0.,-0.)); +#85432 = ORIENTED_EDGE('',*,*,#85433,.T.); +#85433 = EDGE_CURVE('',#85423,#85434,#85436,.T.); +#85434 = VERTEX_POINT('',#85435); +#85435 = CARTESIAN_POINT('',(20.35,-2.067484939698,12.9)); +#85436 = LINE('',#85437,#85438); +#85437 = CARTESIAN_POINT('',(20.35,-2.067484939698,5.1)); +#85438 = VECTOR('',#85439,1.); +#85439 = DIRECTION('',(-0.,-0.,-1.)); +#85440 = ORIENTED_EDGE('',*,*,#85441,.T.); +#85441 = EDGE_CURVE('',#85434,#85442,#85444,.T.); +#85442 = VERTEX_POINT('',#85443); +#85443 = CARTESIAN_POINT('',(19.65,-2.067484939698,12.9)); +#85444 = CIRCLE('',#85445,1.9); +#85445 = AXIS2_PLACEMENT_3D('',#85446,#85447,#85448); +#85446 = CARTESIAN_POINT('',(20.,-0.2,12.9)); +#85447 = DIRECTION('',(0.,0.,-1.)); +#85448 = DIRECTION('',(1.,0.,0.)); +#85449 = ORIENTED_EDGE('',*,*,#85450,.F.); +#85450 = EDGE_CURVE('',#85451,#85442,#85453,.T.); +#85451 = VERTEX_POINT('',#85452); +#85452 = CARTESIAN_POINT('',(19.65,-2.067484939698,13.6)); +#85453 = LINE('',#85454,#85455); +#85454 = CARTESIAN_POINT('',(19.65,-2.067484939698,5.1)); +#85455 = VECTOR('',#85456,1.); +#85456 = DIRECTION('',(-0.,-0.,-1.)); +#85457 = ORIENTED_EDGE('',*,*,#85458,.F.); +#85458 = EDGE_CURVE('',#85459,#85451,#85461,.T.); +#85459 = VERTEX_POINT('',#85460); +#85460 = CARTESIAN_POINT('',(19.65,1.667484939698,13.6)); +#85461 = CIRCLE('',#85462,1.9); +#85462 = AXIS2_PLACEMENT_3D('',#85463,#85464,#85465); +#85463 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#85464 = DIRECTION('',(0.,0.,1.)); +#85465 = DIRECTION('',(1.,0.,-0.)); +#85466 = ORIENTED_EDGE('',*,*,#85467,.T.); +#85467 = EDGE_CURVE('',#85459,#85468,#85470,.T.); +#85468 = VERTEX_POINT('',#85469); +#85469 = CARTESIAN_POINT('',(19.65,1.667484939698,12.9)); +#85470 = LINE('',#85471,#85472); +#85471 = CARTESIAN_POINT('',(19.65,1.667484939698,5.1)); +#85472 = VECTOR('',#85473,1.); +#85473 = DIRECTION('',(-0.,-0.,-1.)); +#85474 = ORIENTED_EDGE('',*,*,#85475,.T.); +#85475 = EDGE_CURVE('',#85468,#85476,#85478,.T.); +#85476 = VERTEX_POINT('',#85477); +#85477 = CARTESIAN_POINT('',(20.35,1.667484939698,12.9)); +#85478 = CIRCLE('',#85479,1.9); +#85479 = AXIS2_PLACEMENT_3D('',#85480,#85481,#85482); +#85480 = CARTESIAN_POINT('',(20.,-0.2,12.9)); +#85481 = DIRECTION('',(0.,0.,-1.)); +#85482 = DIRECTION('',(1.,0.,0.)); +#85483 = ORIENTED_EDGE('',*,*,#85484,.F.); +#85484 = EDGE_CURVE('',#85485,#85476,#85487,.T.); +#85485 = VERTEX_POINT('',#85486); +#85486 = CARTESIAN_POINT('',(20.35,1.667484939698,13.6)); +#85487 = LINE('',#85488,#85489); +#85488 = CARTESIAN_POINT('',(20.35,1.667484939698,5.1)); +#85489 = VECTOR('',#85490,1.); +#85490 = DIRECTION('',(-0.,-0.,-1.)); +#85491 = ORIENTED_EDGE('',*,*,#85492,.F.); +#85492 = EDGE_CURVE('',#85425,#85485,#85493,.T.); +#85493 = CIRCLE('',#85494,1.9); +#85494 = AXIS2_PLACEMENT_3D('',#85495,#85496,#85497); +#85495 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#85496 = DIRECTION('',(0.,0.,1.)); +#85497 = DIRECTION('',(1.,0.,-0.)); +#85498 = ORIENTED_EDGE('',*,*,#85499,.F.); +#85499 = EDGE_CURVE('',#85398,#85425,#85500,.T.); +#85500 = LINE('',#85501,#85502); +#85501 = CARTESIAN_POINT('',(21.9,-0.2,5.1)); +#85502 = VECTOR('',#85503,1.); +#85503 = DIRECTION('',(0.,0.,1.)); +#85504 = ORIENTED_EDGE('',*,*,#85406,.T.); +#85505 = ORIENTED_EDGE('',*,*,#84446,.T.); +#85506 = ORIENTED_EDGE('',*,*,#85507,.T.); +#85507 = EDGE_CURVE('',#84405,#84372,#85508,.T.); +#85508 = CIRCLE('',#85509,1.9); +#85509 = AXIS2_PLACEMENT_3D('',#85510,#85511,#85512); +#85510 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85511 = DIRECTION('',(0.,0.,1.)); +#85512 = DIRECTION('',(1.,0.,-0.)); +#85513 = ORIENTED_EDGE('',*,*,#84371,.T.); +#85514 = ORIENTED_EDGE('',*,*,#85515,.T.); +#85515 = EDGE_CURVE('',#84374,#84347,#85516,.T.); +#85516 = CIRCLE('',#85517,1.9); +#85517 = AXIS2_PLACEMENT_3D('',#85518,#85519,#85520); +#85518 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85519 = DIRECTION('',(0.,0.,1.)); +#85520 = DIRECTION('',(1.,0.,-0.)); +#85521 = ORIENTED_EDGE('',*,*,#84346,.T.); +#85522 = ORIENTED_EDGE('',*,*,#85397,.T.); +#85523 = ORIENTED_EDGE('',*,*,#85499,.T.); +#85524 = CYLINDRICAL_SURFACE('',#85525,1.9); +#85525 = AXIS2_PLACEMENT_3D('',#85526,#85527,#85528); +#85526 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85527 = DIRECTION('',(-0.,-0.,-1.)); +#85528 = DIRECTION('',(1.,0.,0.)); +#85529 = ADVANCED_FACE('',(#85530),#85534,.F.); +#85530 = FACE_BOUND('',#85531,.F.); +#85531 = EDGE_LOOP('',(#85532,#85533)); +#85532 = ORIENTED_EDGE('',*,*,#84412,.F.); +#85533 = ORIENTED_EDGE('',*,*,#85507,.T.); +#85534 = PLANE('',#85535); +#85535 = AXIS2_PLACEMENT_3D('',#85536,#85537,#85538); +#85536 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#85537 = DIRECTION('',(0.,0.,1.)); +#85538 = DIRECTION('',(1.,0.,-0.)); +#85539 = ADVANCED_FACE('',(#85540),#85559,.F.); +#85540 = FACE_BOUND('',#85541,.F.); +#85541 = EDGE_LOOP('',(#85542,#85551,#85558)); +#85542 = ORIENTED_EDGE('',*,*,#85543,.T.); +#85543 = EDGE_CURVE('',#84481,#85544,#85546,.T.); +#85544 = VERTEX_POINT('',#85545); +#85545 = CARTESIAN_POINT('',(16.9,-0.2,5.1)); +#85546 = CIRCLE('',#85547,1.9); +#85547 = AXIS2_PLACEMENT_3D('',#85548,#85549,#85550); +#85548 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85549 = DIRECTION('',(0.,0.,1.)); +#85550 = DIRECTION('',(1.,0.,-0.)); +#85551 = ORIENTED_EDGE('',*,*,#85552,.T.); +#85552 = EDGE_CURVE('',#85544,#84489,#85553,.T.); +#85553 = CIRCLE('',#85554,1.9); +#85554 = AXIS2_PLACEMENT_3D('',#85555,#85556,#85557); +#85555 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85556 = DIRECTION('',(0.,0.,1.)); +#85557 = DIRECTION('',(1.,0.,-0.)); +#85558 = ORIENTED_EDGE('',*,*,#84488,.F.); +#85559 = PLANE('',#85560); +#85560 = AXIS2_PLACEMENT_3D('',#85561,#85562,#85563); +#85561 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85562 = DIRECTION('',(0.,0.,1.)); +#85563 = DIRECTION('',(1.,0.,-0.)); +#85564 = ADVANCED_FACE('',(#85565),#85670,.T.); +#85565 = FACE_BOUND('',#85566,.T.); +#85566 = EDGE_LOOP('',(#85567,#85578,#85586,#85595,#85603,#85612,#85620, + #85629,#85637,#85644,#85650,#85651,#85652,#85659,#85660,#85667, + #85668,#85669)); +#85567 = ORIENTED_EDGE('',*,*,#85568,.F.); +#85568 = EDGE_CURVE('',#85569,#85571,#85573,.T.); +#85569 = VERTEX_POINT('',#85570); +#85570 = CARTESIAN_POINT('',(15.35,-2.067484939698,13.6)); +#85571 = VERTEX_POINT('',#85572); +#85572 = CARTESIAN_POINT('',(16.9,-0.2,13.6)); +#85573 = CIRCLE('',#85574,1.9); +#85574 = AXIS2_PLACEMENT_3D('',#85575,#85576,#85577); +#85575 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#85576 = DIRECTION('',(0.,0.,1.)); +#85577 = DIRECTION('',(1.,0.,-0.)); +#85578 = ORIENTED_EDGE('',*,*,#85579,.T.); +#85579 = EDGE_CURVE('',#85569,#85580,#85582,.T.); +#85580 = VERTEX_POINT('',#85581); +#85581 = CARTESIAN_POINT('',(15.35,-2.067484939698,12.9)); +#85582 = LINE('',#85583,#85584); +#85583 = CARTESIAN_POINT('',(15.35,-2.067484939698,5.1)); +#85584 = VECTOR('',#85585,1.); +#85585 = DIRECTION('',(-0.,-0.,-1.)); +#85586 = ORIENTED_EDGE('',*,*,#85587,.T.); +#85587 = EDGE_CURVE('',#85580,#85588,#85590,.T.); +#85588 = VERTEX_POINT('',#85589); +#85589 = CARTESIAN_POINT('',(14.65,-2.067484939698,12.9)); +#85590 = CIRCLE('',#85591,1.9); +#85591 = AXIS2_PLACEMENT_3D('',#85592,#85593,#85594); +#85592 = CARTESIAN_POINT('',(15.,-0.2,12.9)); +#85593 = DIRECTION('',(0.,0.,-1.)); +#85594 = DIRECTION('',(1.,0.,0.)); +#85595 = ORIENTED_EDGE('',*,*,#85596,.F.); +#85596 = EDGE_CURVE('',#85597,#85588,#85599,.T.); +#85597 = VERTEX_POINT('',#85598); +#85598 = CARTESIAN_POINT('',(14.65,-2.067484939698,13.6)); +#85599 = LINE('',#85600,#85601); +#85600 = CARTESIAN_POINT('',(14.65,-2.067484939698,5.1)); +#85601 = VECTOR('',#85602,1.); +#85602 = DIRECTION('',(-0.,-0.,-1.)); +#85603 = ORIENTED_EDGE('',*,*,#85604,.F.); +#85604 = EDGE_CURVE('',#85605,#85597,#85607,.T.); +#85605 = VERTEX_POINT('',#85606); +#85606 = CARTESIAN_POINT('',(14.65,1.667484939698,13.6)); +#85607 = CIRCLE('',#85608,1.9); +#85608 = AXIS2_PLACEMENT_3D('',#85609,#85610,#85611); +#85609 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#85610 = DIRECTION('',(0.,0.,1.)); +#85611 = DIRECTION('',(1.,0.,-0.)); +#85612 = ORIENTED_EDGE('',*,*,#85613,.T.); +#85613 = EDGE_CURVE('',#85605,#85614,#85616,.T.); +#85614 = VERTEX_POINT('',#85615); +#85615 = CARTESIAN_POINT('',(14.65,1.667484939698,12.9)); +#85616 = LINE('',#85617,#85618); +#85617 = CARTESIAN_POINT('',(14.65,1.667484939698,5.1)); +#85618 = VECTOR('',#85619,1.); +#85619 = DIRECTION('',(-0.,-0.,-1.)); +#85620 = ORIENTED_EDGE('',*,*,#85621,.T.); +#85621 = EDGE_CURVE('',#85614,#85622,#85624,.T.); +#85622 = VERTEX_POINT('',#85623); +#85623 = CARTESIAN_POINT('',(15.35,1.667484939698,12.9)); +#85624 = CIRCLE('',#85625,1.9); +#85625 = AXIS2_PLACEMENT_3D('',#85626,#85627,#85628); +#85626 = CARTESIAN_POINT('',(15.,-0.2,12.9)); +#85627 = DIRECTION('',(0.,0.,-1.)); +#85628 = DIRECTION('',(1.,0.,0.)); +#85629 = ORIENTED_EDGE('',*,*,#85630,.F.); +#85630 = EDGE_CURVE('',#85631,#85622,#85633,.T.); +#85631 = VERTEX_POINT('',#85632); +#85632 = CARTESIAN_POINT('',(15.35,1.667484939698,13.6)); +#85633 = LINE('',#85634,#85635); +#85634 = CARTESIAN_POINT('',(15.35,1.667484939698,5.1)); +#85635 = VECTOR('',#85636,1.); +#85636 = DIRECTION('',(-0.,-0.,-1.)); +#85637 = ORIENTED_EDGE('',*,*,#85638,.F.); +#85638 = EDGE_CURVE('',#85571,#85631,#85639,.T.); +#85639 = CIRCLE('',#85640,1.9); +#85640 = AXIS2_PLACEMENT_3D('',#85641,#85642,#85643); +#85641 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#85642 = DIRECTION('',(0.,0.,1.)); +#85643 = DIRECTION('',(1.,0.,-0.)); +#85644 = ORIENTED_EDGE('',*,*,#85645,.F.); +#85645 = EDGE_CURVE('',#85544,#85571,#85646,.T.); +#85646 = LINE('',#85647,#85648); +#85647 = CARTESIAN_POINT('',(16.9,-0.2,5.1)); +#85648 = VECTOR('',#85649,1.); +#85649 = DIRECTION('',(0.,0.,1.)); +#85650 = ORIENTED_EDGE('',*,*,#85552,.T.); +#85651 = ORIENTED_EDGE('',*,*,#84611,.T.); +#85652 = ORIENTED_EDGE('',*,*,#85653,.T.); +#85653 = EDGE_CURVE('',#84570,#84537,#85654,.T.); +#85654 = CIRCLE('',#85655,1.9); +#85655 = AXIS2_PLACEMENT_3D('',#85656,#85657,#85658); +#85656 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85657 = DIRECTION('',(0.,0.,1.)); +#85658 = DIRECTION('',(1.,0.,-0.)); +#85659 = ORIENTED_EDGE('',*,*,#84536,.T.); +#85660 = ORIENTED_EDGE('',*,*,#85661,.T.); +#85661 = EDGE_CURVE('',#84539,#84512,#85662,.T.); +#85662 = CIRCLE('',#85663,1.9); +#85663 = AXIS2_PLACEMENT_3D('',#85664,#85665,#85666); +#85664 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85665 = DIRECTION('',(0.,0.,1.)); +#85666 = DIRECTION('',(1.,0.,-0.)); +#85667 = ORIENTED_EDGE('',*,*,#84511,.T.); +#85668 = ORIENTED_EDGE('',*,*,#85543,.T.); +#85669 = ORIENTED_EDGE('',*,*,#85645,.T.); +#85670 = CYLINDRICAL_SURFACE('',#85671,1.9); +#85671 = AXIS2_PLACEMENT_3D('',#85672,#85673,#85674); +#85672 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85673 = DIRECTION('',(-0.,-0.,-1.)); +#85674 = DIRECTION('',(1.,0.,0.)); +#85675 = ADVANCED_FACE('',(#85676),#85680,.F.); +#85676 = FACE_BOUND('',#85677,.F.); +#85677 = EDGE_LOOP('',(#85678,#85679)); +#85678 = ORIENTED_EDGE('',*,*,#84577,.F.); +#85679 = ORIENTED_EDGE('',*,*,#85653,.T.); +#85680 = PLANE('',#85681); +#85681 = AXIS2_PLACEMENT_3D('',#85682,#85683,#85684); +#85682 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#85683 = DIRECTION('',(0.,0.,1.)); +#85684 = DIRECTION('',(1.,0.,-0.)); +#85685 = ADVANCED_FACE('',(#85686),#85705,.F.); +#85686 = FACE_BOUND('',#85687,.F.); +#85687 = EDGE_LOOP('',(#85688,#85697,#85704)); +#85688 = ORIENTED_EDGE('',*,*,#85689,.T.); +#85689 = EDGE_CURVE('',#84646,#85690,#85692,.T.); +#85690 = VERTEX_POINT('',#85691); +#85691 = CARTESIAN_POINT('',(11.9,-0.2,5.1)); +#85692 = CIRCLE('',#85693,1.9); +#85693 = AXIS2_PLACEMENT_3D('',#85694,#85695,#85696); +#85694 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85695 = DIRECTION('',(0.,0.,1.)); +#85696 = DIRECTION('',(1.,0.,-0.)); +#85697 = ORIENTED_EDGE('',*,*,#85698,.T.); +#85698 = EDGE_CURVE('',#85690,#84654,#85699,.T.); +#85699 = CIRCLE('',#85700,1.9); +#85700 = AXIS2_PLACEMENT_3D('',#85701,#85702,#85703); +#85701 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85702 = DIRECTION('',(0.,0.,1.)); +#85703 = DIRECTION('',(1.,0.,-0.)); +#85704 = ORIENTED_EDGE('',*,*,#84653,.F.); +#85705 = PLANE('',#85706); +#85706 = AXIS2_PLACEMENT_3D('',#85707,#85708,#85709); +#85707 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85708 = DIRECTION('',(0.,0.,1.)); +#85709 = DIRECTION('',(1.,0.,-0.)); +#85710 = ADVANCED_FACE('',(#85711),#85816,.T.); +#85711 = FACE_BOUND('',#85712,.T.); +#85712 = EDGE_LOOP('',(#85713,#85724,#85732,#85741,#85749,#85758,#85766, + #85775,#85783,#85790,#85796,#85797,#85798,#85805,#85806,#85813, + #85814,#85815)); +#85713 = ORIENTED_EDGE('',*,*,#85714,.F.); +#85714 = EDGE_CURVE('',#85715,#85717,#85719,.T.); +#85715 = VERTEX_POINT('',#85716); +#85716 = CARTESIAN_POINT('',(10.35,-2.067484939698,13.6)); +#85717 = VERTEX_POINT('',#85718); +#85718 = CARTESIAN_POINT('',(11.9,-0.2,13.6)); +#85719 = CIRCLE('',#85720,1.9); +#85720 = AXIS2_PLACEMENT_3D('',#85721,#85722,#85723); +#85721 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#85722 = DIRECTION('',(0.,0.,1.)); +#85723 = DIRECTION('',(1.,0.,-0.)); +#85724 = ORIENTED_EDGE('',*,*,#85725,.T.); +#85725 = EDGE_CURVE('',#85715,#85726,#85728,.T.); +#85726 = VERTEX_POINT('',#85727); +#85727 = CARTESIAN_POINT('',(10.35,-2.067484939698,12.9)); +#85728 = LINE('',#85729,#85730); +#85729 = CARTESIAN_POINT('',(10.35,-2.067484939698,5.1)); +#85730 = VECTOR('',#85731,1.); +#85731 = DIRECTION('',(-0.,-0.,-1.)); +#85732 = ORIENTED_EDGE('',*,*,#85733,.T.); +#85733 = EDGE_CURVE('',#85726,#85734,#85736,.T.); +#85734 = VERTEX_POINT('',#85735); +#85735 = CARTESIAN_POINT('',(9.65,-2.067484939698,12.9)); +#85736 = CIRCLE('',#85737,1.9); +#85737 = AXIS2_PLACEMENT_3D('',#85738,#85739,#85740); +#85738 = CARTESIAN_POINT('',(10.,-0.2,12.9)); +#85739 = DIRECTION('',(0.,0.,-1.)); +#85740 = DIRECTION('',(1.,0.,0.)); +#85741 = ORIENTED_EDGE('',*,*,#85742,.F.); +#85742 = EDGE_CURVE('',#85743,#85734,#85745,.T.); +#85743 = VERTEX_POINT('',#85744); +#85744 = CARTESIAN_POINT('',(9.65,-2.067484939698,13.6)); +#85745 = LINE('',#85746,#85747); +#85746 = CARTESIAN_POINT('',(9.65,-2.067484939698,5.1)); +#85747 = VECTOR('',#85748,1.); +#85748 = DIRECTION('',(-0.,-0.,-1.)); +#85749 = ORIENTED_EDGE('',*,*,#85750,.F.); +#85750 = EDGE_CURVE('',#85751,#85743,#85753,.T.); +#85751 = VERTEX_POINT('',#85752); +#85752 = CARTESIAN_POINT('',(9.65,1.667484939698,13.6)); +#85753 = CIRCLE('',#85754,1.9); +#85754 = AXIS2_PLACEMENT_3D('',#85755,#85756,#85757); +#85755 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#85756 = DIRECTION('',(0.,0.,1.)); +#85757 = DIRECTION('',(1.,0.,-0.)); +#85758 = ORIENTED_EDGE('',*,*,#85759,.T.); +#85759 = EDGE_CURVE('',#85751,#85760,#85762,.T.); +#85760 = VERTEX_POINT('',#85761); +#85761 = CARTESIAN_POINT('',(9.65,1.667484939698,12.9)); +#85762 = LINE('',#85763,#85764); +#85763 = CARTESIAN_POINT('',(9.65,1.667484939698,5.1)); +#85764 = VECTOR('',#85765,1.); +#85765 = DIRECTION('',(-0.,-0.,-1.)); +#85766 = ORIENTED_EDGE('',*,*,#85767,.T.); +#85767 = EDGE_CURVE('',#85760,#85768,#85770,.T.); +#85768 = VERTEX_POINT('',#85769); +#85769 = CARTESIAN_POINT('',(10.35,1.667484939698,12.9)); +#85770 = CIRCLE('',#85771,1.9); +#85771 = AXIS2_PLACEMENT_3D('',#85772,#85773,#85774); +#85772 = CARTESIAN_POINT('',(10.,-0.2,12.9)); +#85773 = DIRECTION('',(0.,0.,-1.)); +#85774 = DIRECTION('',(1.,0.,0.)); +#85775 = ORIENTED_EDGE('',*,*,#85776,.F.); +#85776 = EDGE_CURVE('',#85777,#85768,#85779,.T.); +#85777 = VERTEX_POINT('',#85778); +#85778 = CARTESIAN_POINT('',(10.35,1.667484939698,13.6)); +#85779 = LINE('',#85780,#85781); +#85780 = CARTESIAN_POINT('',(10.35,1.667484939698,5.1)); +#85781 = VECTOR('',#85782,1.); +#85782 = DIRECTION('',(-0.,-0.,-1.)); +#85783 = ORIENTED_EDGE('',*,*,#85784,.F.); +#85784 = EDGE_CURVE('',#85717,#85777,#85785,.T.); +#85785 = CIRCLE('',#85786,1.9); +#85786 = AXIS2_PLACEMENT_3D('',#85787,#85788,#85789); +#85787 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#85788 = DIRECTION('',(0.,0.,1.)); +#85789 = DIRECTION('',(1.,0.,-0.)); +#85790 = ORIENTED_EDGE('',*,*,#85791,.F.); +#85791 = EDGE_CURVE('',#85690,#85717,#85792,.T.); +#85792 = LINE('',#85793,#85794); +#85793 = CARTESIAN_POINT('',(11.9,-0.2,5.1)); +#85794 = VECTOR('',#85795,1.); +#85795 = DIRECTION('',(0.,0.,1.)); +#85796 = ORIENTED_EDGE('',*,*,#85698,.T.); +#85797 = ORIENTED_EDGE('',*,*,#84776,.T.); +#85798 = ORIENTED_EDGE('',*,*,#85799,.T.); +#85799 = EDGE_CURVE('',#84735,#84702,#85800,.T.); +#85800 = CIRCLE('',#85801,1.9); +#85801 = AXIS2_PLACEMENT_3D('',#85802,#85803,#85804); +#85802 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85803 = DIRECTION('',(0.,0.,1.)); +#85804 = DIRECTION('',(1.,0.,-0.)); +#85805 = ORIENTED_EDGE('',*,*,#84701,.T.); +#85806 = ORIENTED_EDGE('',*,*,#85807,.T.); +#85807 = EDGE_CURVE('',#84704,#84677,#85808,.T.); +#85808 = CIRCLE('',#85809,1.9); +#85809 = AXIS2_PLACEMENT_3D('',#85810,#85811,#85812); +#85810 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85811 = DIRECTION('',(0.,0.,1.)); +#85812 = DIRECTION('',(1.,0.,-0.)); +#85813 = ORIENTED_EDGE('',*,*,#84676,.T.); +#85814 = ORIENTED_EDGE('',*,*,#85689,.T.); +#85815 = ORIENTED_EDGE('',*,*,#85791,.T.); +#85816 = CYLINDRICAL_SURFACE('',#85817,1.9); +#85817 = AXIS2_PLACEMENT_3D('',#85818,#85819,#85820); +#85818 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85819 = DIRECTION('',(-0.,-0.,-1.)); +#85820 = DIRECTION('',(1.,0.,0.)); +#85821 = ADVANCED_FACE('',(#85822),#85826,.F.); +#85822 = FACE_BOUND('',#85823,.F.); +#85823 = EDGE_LOOP('',(#85824,#85825)); +#85824 = ORIENTED_EDGE('',*,*,#84742,.F.); +#85825 = ORIENTED_EDGE('',*,*,#85799,.T.); +#85826 = PLANE('',#85827); +#85827 = AXIS2_PLACEMENT_3D('',#85828,#85829,#85830); +#85828 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#85829 = DIRECTION('',(0.,0.,1.)); +#85830 = DIRECTION('',(1.,0.,-0.)); +#85831 = ADVANCED_FACE('',(#85832),#85851,.F.); +#85832 = FACE_BOUND('',#85833,.F.); +#85833 = EDGE_LOOP('',(#85834,#85843,#85850)); +#85834 = ORIENTED_EDGE('',*,*,#85835,.T.); +#85835 = EDGE_CURVE('',#84811,#85836,#85838,.T.); +#85836 = VERTEX_POINT('',#85837); +#85837 = CARTESIAN_POINT('',(6.9,-0.2,5.1)); +#85838 = CIRCLE('',#85839,1.9); +#85839 = AXIS2_PLACEMENT_3D('',#85840,#85841,#85842); +#85840 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85841 = DIRECTION('',(0.,0.,1.)); +#85842 = DIRECTION('',(1.,0.,-0.)); +#85843 = ORIENTED_EDGE('',*,*,#85844,.T.); +#85844 = EDGE_CURVE('',#85836,#84819,#85845,.T.); +#85845 = CIRCLE('',#85846,1.9); +#85846 = AXIS2_PLACEMENT_3D('',#85847,#85848,#85849); +#85847 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85848 = DIRECTION('',(0.,0.,1.)); +#85849 = DIRECTION('',(1.,0.,-0.)); +#85850 = ORIENTED_EDGE('',*,*,#84818,.F.); +#85851 = PLANE('',#85852); +#85852 = AXIS2_PLACEMENT_3D('',#85853,#85854,#85855); +#85853 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85854 = DIRECTION('',(0.,0.,1.)); +#85855 = DIRECTION('',(1.,0.,-0.)); +#85856 = ADVANCED_FACE('',(#85857),#85962,.T.); +#85857 = FACE_BOUND('',#85858,.T.); +#85858 = EDGE_LOOP('',(#85859,#85870,#85878,#85887,#85895,#85904,#85912, + #85921,#85929,#85936,#85942,#85943,#85944,#85951,#85952,#85959, + #85960,#85961)); +#85859 = ORIENTED_EDGE('',*,*,#85860,.F.); +#85860 = EDGE_CURVE('',#85861,#85863,#85865,.T.); +#85861 = VERTEX_POINT('',#85862); +#85862 = CARTESIAN_POINT('',(5.35,-2.067484939698,13.6)); +#85863 = VERTEX_POINT('',#85864); +#85864 = CARTESIAN_POINT('',(6.9,-0.2,13.6)); +#85865 = CIRCLE('',#85866,1.9); +#85866 = AXIS2_PLACEMENT_3D('',#85867,#85868,#85869); +#85867 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#85868 = DIRECTION('',(0.,0.,1.)); +#85869 = DIRECTION('',(1.,0.,-0.)); +#85870 = ORIENTED_EDGE('',*,*,#85871,.T.); +#85871 = EDGE_CURVE('',#85861,#85872,#85874,.T.); +#85872 = VERTEX_POINT('',#85873); +#85873 = CARTESIAN_POINT('',(5.35,-2.067484939698,12.9)); +#85874 = LINE('',#85875,#85876); +#85875 = CARTESIAN_POINT('',(5.35,-2.067484939698,5.1)); +#85876 = VECTOR('',#85877,1.); +#85877 = DIRECTION('',(-0.,-0.,-1.)); +#85878 = ORIENTED_EDGE('',*,*,#85879,.T.); +#85879 = EDGE_CURVE('',#85872,#85880,#85882,.T.); +#85880 = VERTEX_POINT('',#85881); +#85881 = CARTESIAN_POINT('',(4.65,-2.067484939698,12.9)); +#85882 = CIRCLE('',#85883,1.9); +#85883 = AXIS2_PLACEMENT_3D('',#85884,#85885,#85886); +#85884 = CARTESIAN_POINT('',(5.,-0.2,12.9)); +#85885 = DIRECTION('',(0.,0.,-1.)); +#85886 = DIRECTION('',(1.,0.,0.)); +#85887 = ORIENTED_EDGE('',*,*,#85888,.F.); +#85888 = EDGE_CURVE('',#85889,#85880,#85891,.T.); +#85889 = VERTEX_POINT('',#85890); +#85890 = CARTESIAN_POINT('',(4.65,-2.067484939698,13.6)); +#85891 = LINE('',#85892,#85893); +#85892 = CARTESIAN_POINT('',(4.65,-2.067484939698,5.1)); +#85893 = VECTOR('',#85894,1.); +#85894 = DIRECTION('',(-0.,-0.,-1.)); +#85895 = ORIENTED_EDGE('',*,*,#85896,.F.); +#85896 = EDGE_CURVE('',#85897,#85889,#85899,.T.); +#85897 = VERTEX_POINT('',#85898); +#85898 = CARTESIAN_POINT('',(4.65,1.667484939698,13.6)); +#85899 = CIRCLE('',#85900,1.9); +#85900 = AXIS2_PLACEMENT_3D('',#85901,#85902,#85903); +#85901 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#85902 = DIRECTION('',(0.,0.,1.)); +#85903 = DIRECTION('',(1.,0.,-0.)); +#85904 = ORIENTED_EDGE('',*,*,#85905,.T.); +#85905 = EDGE_CURVE('',#85897,#85906,#85908,.T.); +#85906 = VERTEX_POINT('',#85907); +#85907 = CARTESIAN_POINT('',(4.65,1.667484939698,12.9)); +#85908 = LINE('',#85909,#85910); +#85909 = CARTESIAN_POINT('',(4.65,1.667484939698,5.1)); +#85910 = VECTOR('',#85911,1.); +#85911 = DIRECTION('',(-0.,-0.,-1.)); +#85912 = ORIENTED_EDGE('',*,*,#85913,.T.); +#85913 = EDGE_CURVE('',#85906,#85914,#85916,.T.); +#85914 = VERTEX_POINT('',#85915); +#85915 = CARTESIAN_POINT('',(5.35,1.667484939698,12.9)); +#85916 = CIRCLE('',#85917,1.9); +#85917 = AXIS2_PLACEMENT_3D('',#85918,#85919,#85920); +#85918 = CARTESIAN_POINT('',(5.,-0.2,12.9)); +#85919 = DIRECTION('',(0.,0.,-1.)); +#85920 = DIRECTION('',(1.,0.,0.)); +#85921 = ORIENTED_EDGE('',*,*,#85922,.F.); +#85922 = EDGE_CURVE('',#85923,#85914,#85925,.T.); +#85923 = VERTEX_POINT('',#85924); +#85924 = CARTESIAN_POINT('',(5.35,1.667484939698,13.6)); +#85925 = LINE('',#85926,#85927); +#85926 = CARTESIAN_POINT('',(5.35,1.667484939698,5.1)); +#85927 = VECTOR('',#85928,1.); +#85928 = DIRECTION('',(-0.,-0.,-1.)); +#85929 = ORIENTED_EDGE('',*,*,#85930,.F.); +#85930 = EDGE_CURVE('',#85863,#85923,#85931,.T.); +#85931 = CIRCLE('',#85932,1.9); +#85932 = AXIS2_PLACEMENT_3D('',#85933,#85934,#85935); +#85933 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#85934 = DIRECTION('',(0.,0.,1.)); +#85935 = DIRECTION('',(1.,0.,-0.)); +#85936 = ORIENTED_EDGE('',*,*,#85937,.F.); +#85937 = EDGE_CURVE('',#85836,#85863,#85938,.T.); +#85938 = LINE('',#85939,#85940); +#85939 = CARTESIAN_POINT('',(6.9,-0.2,5.1)); +#85940 = VECTOR('',#85941,1.); +#85941 = DIRECTION('',(0.,0.,1.)); +#85942 = ORIENTED_EDGE('',*,*,#85844,.T.); +#85943 = ORIENTED_EDGE('',*,*,#84941,.T.); +#85944 = ORIENTED_EDGE('',*,*,#85945,.T.); +#85945 = EDGE_CURVE('',#84900,#84867,#85946,.T.); +#85946 = CIRCLE('',#85947,1.9); +#85947 = AXIS2_PLACEMENT_3D('',#85948,#85949,#85950); +#85948 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85949 = DIRECTION('',(0.,0.,1.)); +#85950 = DIRECTION('',(1.,0.,-0.)); +#85951 = ORIENTED_EDGE('',*,*,#84866,.T.); +#85952 = ORIENTED_EDGE('',*,*,#85953,.T.); +#85953 = EDGE_CURVE('',#84869,#84842,#85954,.T.); +#85954 = CIRCLE('',#85955,1.9); +#85955 = AXIS2_PLACEMENT_3D('',#85956,#85957,#85958); +#85956 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85957 = DIRECTION('',(0.,0.,1.)); +#85958 = DIRECTION('',(1.,0.,-0.)); +#85959 = ORIENTED_EDGE('',*,*,#84841,.T.); +#85960 = ORIENTED_EDGE('',*,*,#85835,.T.); +#85961 = ORIENTED_EDGE('',*,*,#85937,.T.); +#85962 = CYLINDRICAL_SURFACE('',#85963,1.9); +#85963 = AXIS2_PLACEMENT_3D('',#85964,#85965,#85966); +#85964 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85965 = DIRECTION('',(-0.,-0.,-1.)); +#85966 = DIRECTION('',(1.,0.,0.)); +#85967 = ADVANCED_FACE('',(#85968),#85972,.F.); +#85968 = FACE_BOUND('',#85969,.F.); +#85969 = EDGE_LOOP('',(#85970,#85971)); +#85970 = ORIENTED_EDGE('',*,*,#84907,.F.); +#85971 = ORIENTED_EDGE('',*,*,#85945,.T.); +#85972 = PLANE('',#85973); +#85973 = AXIS2_PLACEMENT_3D('',#85974,#85975,#85976); +#85974 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#85975 = DIRECTION('',(0.,0.,1.)); +#85976 = DIRECTION('',(1.,0.,-0.)); +#85977 = ADVANCED_FACE('',(#85978),#85997,.F.); +#85978 = FACE_BOUND('',#85979,.F.); +#85979 = EDGE_LOOP('',(#85980,#85989,#85996)); +#85980 = ORIENTED_EDGE('',*,*,#85981,.T.); +#85981 = EDGE_CURVE('',#84976,#85982,#85984,.T.); +#85982 = VERTEX_POINT('',#85983); +#85983 = CARTESIAN_POINT('',(1.9,-0.2,5.1)); +#85984 = CIRCLE('',#85985,1.9); +#85985 = AXIS2_PLACEMENT_3D('',#85986,#85987,#85988); +#85986 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85987 = DIRECTION('',(0.,0.,1.)); +#85988 = DIRECTION('',(1.,0.,-0.)); +#85989 = ORIENTED_EDGE('',*,*,#85990,.T.); +#85990 = EDGE_CURVE('',#85982,#84984,#85991,.T.); +#85991 = CIRCLE('',#85992,1.9); +#85992 = AXIS2_PLACEMENT_3D('',#85993,#85994,#85995); +#85993 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#85994 = DIRECTION('',(0.,0.,1.)); +#85995 = DIRECTION('',(1.,0.,-0.)); +#85996 = ORIENTED_EDGE('',*,*,#84983,.F.); +#85997 = PLANE('',#85998); +#85998 = AXIS2_PLACEMENT_3D('',#85999,#86000,#86001); +#85999 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,5.1)); +#86000 = DIRECTION('',(0.,0.,1.)); +#86001 = DIRECTION('',(1.,0.,-0.)); +#86002 = ADVANCED_FACE('',(#86003),#86108,.T.); +#86003 = FACE_BOUND('',#86004,.T.); +#86004 = EDGE_LOOP('',(#86005,#86016,#86024,#86033,#86041,#86050,#86058, + #86067,#86075,#86082,#86088,#86089,#86090,#86097,#86098,#86105, + #86106,#86107)); +#86005 = ORIENTED_EDGE('',*,*,#86006,.F.); +#86006 = EDGE_CURVE('',#86007,#86009,#86011,.T.); +#86007 = VERTEX_POINT('',#86008); +#86008 = CARTESIAN_POINT('',(0.35,-2.067484939698,13.6)); +#86009 = VERTEX_POINT('',#86010); +#86010 = CARTESIAN_POINT('',(1.9,-0.2,13.6)); +#86011 = CIRCLE('',#86012,1.9); +#86012 = AXIS2_PLACEMENT_3D('',#86013,#86014,#86015); +#86013 = CARTESIAN_POINT('',(0.,-0.2,13.6)); +#86014 = DIRECTION('',(0.,0.,1.)); +#86015 = DIRECTION('',(1.,0.,-0.)); +#86016 = ORIENTED_EDGE('',*,*,#86017,.T.); +#86017 = EDGE_CURVE('',#86007,#86018,#86020,.T.); +#86018 = VERTEX_POINT('',#86019); +#86019 = CARTESIAN_POINT('',(0.35,-2.067484939698,12.9)); +#86020 = LINE('',#86021,#86022); +#86021 = CARTESIAN_POINT('',(0.35,-2.067484939698,5.1)); +#86022 = VECTOR('',#86023,1.); +#86023 = DIRECTION('',(-0.,-0.,-1.)); +#86024 = ORIENTED_EDGE('',*,*,#86025,.T.); +#86025 = EDGE_CURVE('',#86018,#86026,#86028,.T.); +#86026 = VERTEX_POINT('',#86027); +#86027 = CARTESIAN_POINT('',(-0.35,-2.067484939698,12.9)); +#86028 = CIRCLE('',#86029,1.9); +#86029 = AXIS2_PLACEMENT_3D('',#86030,#86031,#86032); +#86030 = CARTESIAN_POINT('',(0.,-0.2,12.9)); +#86031 = DIRECTION('',(0.,0.,-1.)); +#86032 = DIRECTION('',(1.,0.,0.)); +#86033 = ORIENTED_EDGE('',*,*,#86034,.F.); +#86034 = EDGE_CURVE('',#86035,#86026,#86037,.T.); +#86035 = VERTEX_POINT('',#86036); +#86036 = CARTESIAN_POINT('',(-0.35,-2.067484939698,13.6)); +#86037 = LINE('',#86038,#86039); +#86038 = CARTESIAN_POINT('',(-0.35,-2.067484939698,5.1)); +#86039 = VECTOR('',#86040,1.); +#86040 = DIRECTION('',(-0.,-0.,-1.)); +#86041 = ORIENTED_EDGE('',*,*,#86042,.F.); +#86042 = EDGE_CURVE('',#86043,#86035,#86045,.T.); +#86043 = VERTEX_POINT('',#86044); +#86044 = CARTESIAN_POINT('',(-0.35,1.667484939698,13.6)); +#86045 = CIRCLE('',#86046,1.9); +#86046 = AXIS2_PLACEMENT_3D('',#86047,#86048,#86049); +#86047 = CARTESIAN_POINT('',(0.,-0.2,13.6)); +#86048 = DIRECTION('',(0.,0.,1.)); +#86049 = DIRECTION('',(1.,0.,-0.)); +#86050 = ORIENTED_EDGE('',*,*,#86051,.T.); +#86051 = EDGE_CURVE('',#86043,#86052,#86054,.T.); +#86052 = VERTEX_POINT('',#86053); +#86053 = CARTESIAN_POINT('',(-0.35,1.667484939698,12.9)); +#86054 = LINE('',#86055,#86056); +#86055 = CARTESIAN_POINT('',(-0.35,1.667484939698,5.1)); +#86056 = VECTOR('',#86057,1.); +#86057 = DIRECTION('',(-0.,-0.,-1.)); +#86058 = ORIENTED_EDGE('',*,*,#86059,.T.); +#86059 = EDGE_CURVE('',#86052,#86060,#86062,.T.); +#86060 = VERTEX_POINT('',#86061); +#86061 = CARTESIAN_POINT('',(0.35,1.667484939698,12.9)); +#86062 = CIRCLE('',#86063,1.9); +#86063 = AXIS2_PLACEMENT_3D('',#86064,#86065,#86066); +#86064 = CARTESIAN_POINT('',(0.,-0.2,12.9)); +#86065 = DIRECTION('',(0.,0.,-1.)); +#86066 = DIRECTION('',(1.,0.,0.)); +#86067 = ORIENTED_EDGE('',*,*,#86068,.F.); +#86068 = EDGE_CURVE('',#86069,#86060,#86071,.T.); +#86069 = VERTEX_POINT('',#86070); +#86070 = CARTESIAN_POINT('',(0.35,1.667484939698,13.6)); +#86071 = LINE('',#86072,#86073); +#86072 = CARTESIAN_POINT('',(0.35,1.667484939698,5.1)); +#86073 = VECTOR('',#86074,1.); +#86074 = DIRECTION('',(-0.,-0.,-1.)); +#86075 = ORIENTED_EDGE('',*,*,#86076,.F.); +#86076 = EDGE_CURVE('',#86009,#86069,#86077,.T.); +#86077 = CIRCLE('',#86078,1.9); +#86078 = AXIS2_PLACEMENT_3D('',#86079,#86080,#86081); +#86079 = CARTESIAN_POINT('',(0.,-0.2,13.6)); +#86080 = DIRECTION('',(0.,0.,1.)); +#86081 = DIRECTION('',(1.,0.,-0.)); +#86082 = ORIENTED_EDGE('',*,*,#86083,.F.); +#86083 = EDGE_CURVE('',#85982,#86009,#86084,.T.); +#86084 = LINE('',#86085,#86086); +#86085 = CARTESIAN_POINT('',(1.9,-0.2,5.1)); +#86086 = VECTOR('',#86087,1.); +#86087 = DIRECTION('',(0.,0.,1.)); +#86088 = ORIENTED_EDGE('',*,*,#85990,.T.); +#86089 = ORIENTED_EDGE('',*,*,#85106,.T.); +#86090 = ORIENTED_EDGE('',*,*,#86091,.T.); +#86091 = EDGE_CURVE('',#85065,#85032,#86092,.T.); +#86092 = CIRCLE('',#86093,1.9); +#86093 = AXIS2_PLACEMENT_3D('',#86094,#86095,#86096); +#86094 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#86095 = DIRECTION('',(0.,0.,1.)); +#86096 = DIRECTION('',(1.,0.,-0.)); +#86097 = ORIENTED_EDGE('',*,*,#85031,.T.); +#86098 = ORIENTED_EDGE('',*,*,#86099,.T.); +#86099 = EDGE_CURVE('',#85034,#85007,#86100,.T.); +#86100 = CIRCLE('',#86101,1.9); +#86101 = AXIS2_PLACEMENT_3D('',#86102,#86103,#86104); +#86102 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#86103 = DIRECTION('',(0.,0.,1.)); +#86104 = DIRECTION('',(1.,0.,-0.)); +#86105 = ORIENTED_EDGE('',*,*,#85006,.T.); +#86106 = ORIENTED_EDGE('',*,*,#85981,.T.); +#86107 = ORIENTED_EDGE('',*,*,#86083,.T.); +#86108 = CYLINDRICAL_SURFACE('',#86109,1.9); +#86109 = AXIS2_PLACEMENT_3D('',#86110,#86111,#86112); +#86110 = CARTESIAN_POINT('',(0.,-0.2,5.1)); +#86111 = DIRECTION('',(-0.,-0.,-1.)); +#86112 = DIRECTION('',(1.,0.,0.)); +#86113 = ADVANCED_FACE('',(#86114),#86118,.F.); +#86114 = FACE_BOUND('',#86115,.F.); +#86115 = EDGE_LOOP('',(#86116,#86117)); +#86116 = ORIENTED_EDGE('',*,*,#85072,.F.); +#86117 = ORIENTED_EDGE('',*,*,#86091,.T.); +#86118 = PLANE('',#86119); +#86119 = AXIS2_PLACEMENT_3D('',#86120,#86121,#86122); +#86120 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,5.1)); +#86121 = DIRECTION('',(0.,0.,1.)); +#86122 = DIRECTION('',(1.,0.,-0.)); +#86123 = ADVANCED_FACE('',(#86124),#86128,.F.); +#86124 = FACE_BOUND('',#86125,.F.); +#86125 = EDGE_LOOP('',(#86126,#86127)); +#86126 = ORIENTED_EDGE('',*,*,#85515,.T.); +#86127 = ORIENTED_EDGE('',*,*,#85125,.F.); +#86128 = PLANE('',#86129); +#86129 = AXIS2_PLACEMENT_3D('',#86130,#86131,#86132); +#86130 = CARTESIAN_POINT('',(20.,-0.2,5.1)); +#86131 = DIRECTION('',(0.,0.,1.)); +#86132 = DIRECTION('',(1.,0.,-0.)); +#86133 = ADVANCED_FACE('',(#86134),#86159,.T.); +#86134 = FACE_BOUND('',#86135,.T.); +#86135 = EDGE_LOOP('',(#86136,#86144,#86145,#86153)); +#86136 = ORIENTED_EDGE('',*,*,#86137,.T.); +#86137 = EDGE_CURVE('',#86138,#85138,#86140,.T.); +#86138 = VERTEX_POINT('',#86139); +#86139 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86140 = LINE('',#86141,#86142); +#86141 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86142 = VECTOR('',#86143,1.); +#86143 = DIRECTION('',(0.,-1.,0.)); +#86144 = ORIENTED_EDGE('',*,*,#85137,.T.); +#86145 = ORIENTED_EDGE('',*,*,#86146,.F.); +#86146 = EDGE_CURVE('',#86147,#85140,#86149,.T.); +#86147 = VERTEX_POINT('',#86148); +#86148 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86149 = LINE('',#86150,#86151); +#86150 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86151 = VECTOR('',#86152,1.); +#86152 = DIRECTION('',(0.,-1.,0.)); +#86153 = ORIENTED_EDGE('',*,*,#86154,.F.); +#86154 = EDGE_CURVE('',#86138,#86147,#86155,.T.); +#86155 = LINE('',#86156,#86157); +#86156 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86157 = VECTOR('',#86158,1.); +#86158 = DIRECTION('',(0.,0.,-1.)); +#86159 = PLANE('',#86160); +#86160 = AXIS2_PLACEMENT_3D('',#86161,#86162,#86163); +#86161 = CARTESIAN_POINT('',(18.75,2.,5.)); +#86162 = DIRECTION('',(1.,0.,0.)); +#86163 = DIRECTION('',(0.,0.,-1.)); +#86164 = ADVANCED_FACE('',(#86165),#86183,.T.); +#86165 = FACE_BOUND('',#86166,.T.); +#86166 = EDGE_LOOP('',(#86167,#86175,#86176,#86177)); +#86167 = ORIENTED_EDGE('',*,*,#86168,.T.); +#86168 = EDGE_CURVE('',#86169,#85156,#86171,.T.); +#86169 = VERTEX_POINT('',#86170); +#86170 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86171 = LINE('',#86172,#86173); +#86172 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86173 = VECTOR('',#86174,1.); +#86174 = DIRECTION('',(0.,-1.,0.)); +#86175 = ORIENTED_EDGE('',*,*,#85163,.T.); +#86176 = ORIENTED_EDGE('',*,*,#86137,.F.); +#86177 = ORIENTED_EDGE('',*,*,#86178,.F.); +#86178 = EDGE_CURVE('',#86169,#86138,#86179,.T.); +#86179 = LINE('',#86180,#86181); +#86180 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86181 = VECTOR('',#86182,1.); +#86182 = DIRECTION('',(-1.,0.,0.)); +#86183 = PLANE('',#86184); +#86184 = AXIS2_PLACEMENT_3D('',#86185,#86186,#86187); +#86185 = CARTESIAN_POINT('',(21.25,2.,5.)); +#86186 = DIRECTION('',(-0.,-0.,-1.)); +#86187 = DIRECTION('',(-1.,0.,0.)); +#86188 = ADVANCED_FACE('',(#86189),#86207,.T.); +#86189 = FACE_BOUND('',#86190,.T.); +#86190 = EDGE_LOOP('',(#86191,#86199,#86200,#86201)); +#86191 = ORIENTED_EDGE('',*,*,#86192,.T.); +#86192 = EDGE_CURVE('',#86193,#85148,#86195,.T.); +#86193 = VERTEX_POINT('',#86194); +#86194 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86195 = LINE('',#86196,#86197); +#86196 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86197 = VECTOR('',#86198,1.); +#86198 = DIRECTION('',(0.,-1.,0.)); +#86199 = ORIENTED_EDGE('',*,*,#85155,.T.); +#86200 = ORIENTED_EDGE('',*,*,#86168,.F.); +#86201 = ORIENTED_EDGE('',*,*,#86202,.F.); +#86202 = EDGE_CURVE('',#86193,#86169,#86203,.T.); +#86203 = LINE('',#86204,#86205); +#86204 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86205 = VECTOR('',#86206,1.); +#86206 = DIRECTION('',(0.,0.,1.)); +#86207 = PLANE('',#86208); +#86208 = AXIS2_PLACEMENT_3D('',#86209,#86210,#86211); +#86209 = CARTESIAN_POINT('',(21.25,2.,2.5)); +#86210 = DIRECTION('',(-1.,0.,0.)); +#86211 = DIRECTION('',(0.,0.,1.)); +#86212 = ADVANCED_FACE('',(#86213),#86224,.T.); +#86213 = FACE_BOUND('',#86214,.T.); +#86214 = EDGE_LOOP('',(#86215,#86216,#86217,#86218)); +#86215 = ORIENTED_EDGE('',*,*,#86146,.T.); +#86216 = ORIENTED_EDGE('',*,*,#85147,.T.); +#86217 = ORIENTED_EDGE('',*,*,#86192,.F.); +#86218 = ORIENTED_EDGE('',*,*,#86219,.F.); +#86219 = EDGE_CURVE('',#86147,#86193,#86220,.T.); +#86220 = LINE('',#86221,#86222); +#86221 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86222 = VECTOR('',#86223,1.); +#86223 = DIRECTION('',(1.,0.,0.)); +#86224 = PLANE('',#86225); +#86225 = AXIS2_PLACEMENT_3D('',#86226,#86227,#86228); +#86226 = CARTESIAN_POINT('',(18.75,2.,2.5)); +#86227 = DIRECTION('',(-0.,0.,1.)); +#86228 = DIRECTION('',(1.,0.,0.)); +#86229 = ADVANCED_FACE('',(#86230),#86234,.F.); +#86230 = FACE_BOUND('',#86231,.F.); +#86231 = EDGE_LOOP('',(#86232,#86233)); +#86232 = ORIENTED_EDGE('',*,*,#85661,.T.); +#86233 = ORIENTED_EDGE('',*,*,#85180,.F.); +#86234 = PLANE('',#86235); +#86235 = AXIS2_PLACEMENT_3D('',#86236,#86237,#86238); +#86236 = CARTESIAN_POINT('',(15.,-0.2,5.1)); +#86237 = DIRECTION('',(0.,0.,1.)); +#86238 = DIRECTION('',(1.,0.,-0.)); +#86239 = ADVANCED_FACE('',(#86240),#86265,.T.); +#86240 = FACE_BOUND('',#86241,.T.); +#86241 = EDGE_LOOP('',(#86242,#86250,#86251,#86259)); +#86242 = ORIENTED_EDGE('',*,*,#86243,.T.); +#86243 = EDGE_CURVE('',#86244,#85193,#86246,.T.); +#86244 = VERTEX_POINT('',#86245); +#86245 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86246 = LINE('',#86247,#86248); +#86247 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86248 = VECTOR('',#86249,1.); +#86249 = DIRECTION('',(0.,-1.,0.)); +#86250 = ORIENTED_EDGE('',*,*,#85192,.T.); +#86251 = ORIENTED_EDGE('',*,*,#86252,.F.); +#86252 = EDGE_CURVE('',#86253,#85195,#86255,.T.); +#86253 = VERTEX_POINT('',#86254); +#86254 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86255 = LINE('',#86256,#86257); +#86256 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86257 = VECTOR('',#86258,1.); +#86258 = DIRECTION('',(0.,-1.,0.)); +#86259 = ORIENTED_EDGE('',*,*,#86260,.F.); +#86260 = EDGE_CURVE('',#86244,#86253,#86261,.T.); +#86261 = LINE('',#86262,#86263); +#86262 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86263 = VECTOR('',#86264,1.); +#86264 = DIRECTION('',(0.,0.,-1.)); +#86265 = PLANE('',#86266); +#86266 = AXIS2_PLACEMENT_3D('',#86267,#86268,#86269); +#86267 = CARTESIAN_POINT('',(13.75,2.,5.)); +#86268 = DIRECTION('',(1.,0.,0.)); +#86269 = DIRECTION('',(0.,0.,-1.)); +#86270 = ADVANCED_FACE('',(#86271),#86289,.T.); +#86271 = FACE_BOUND('',#86272,.T.); +#86272 = EDGE_LOOP('',(#86273,#86281,#86282,#86283)); +#86273 = ORIENTED_EDGE('',*,*,#86274,.T.); +#86274 = EDGE_CURVE('',#86275,#85211,#86277,.T.); +#86275 = VERTEX_POINT('',#86276); +#86276 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86277 = LINE('',#86278,#86279); +#86278 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86279 = VECTOR('',#86280,1.); +#86280 = DIRECTION('',(0.,-1.,0.)); +#86281 = ORIENTED_EDGE('',*,*,#85218,.T.); +#86282 = ORIENTED_EDGE('',*,*,#86243,.F.); +#86283 = ORIENTED_EDGE('',*,*,#86284,.F.); +#86284 = EDGE_CURVE('',#86275,#86244,#86285,.T.); +#86285 = LINE('',#86286,#86287); +#86286 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86287 = VECTOR('',#86288,1.); +#86288 = DIRECTION('',(-1.,0.,0.)); +#86289 = PLANE('',#86290); +#86290 = AXIS2_PLACEMENT_3D('',#86291,#86292,#86293); +#86291 = CARTESIAN_POINT('',(16.25,2.,5.)); +#86292 = DIRECTION('',(-0.,-0.,-1.)); +#86293 = DIRECTION('',(-1.,0.,0.)); +#86294 = ADVANCED_FACE('',(#86295),#86313,.T.); +#86295 = FACE_BOUND('',#86296,.T.); +#86296 = EDGE_LOOP('',(#86297,#86305,#86306,#86307)); +#86297 = ORIENTED_EDGE('',*,*,#86298,.T.); +#86298 = EDGE_CURVE('',#86299,#85203,#86301,.T.); +#86299 = VERTEX_POINT('',#86300); +#86300 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86301 = LINE('',#86302,#86303); +#86302 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86303 = VECTOR('',#86304,1.); +#86304 = DIRECTION('',(0.,-1.,0.)); +#86305 = ORIENTED_EDGE('',*,*,#85210,.T.); +#86306 = ORIENTED_EDGE('',*,*,#86274,.F.); +#86307 = ORIENTED_EDGE('',*,*,#86308,.F.); +#86308 = EDGE_CURVE('',#86299,#86275,#86309,.T.); +#86309 = LINE('',#86310,#86311); +#86310 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86311 = VECTOR('',#86312,1.); +#86312 = DIRECTION('',(0.,0.,1.)); +#86313 = PLANE('',#86314); +#86314 = AXIS2_PLACEMENT_3D('',#86315,#86316,#86317); +#86315 = CARTESIAN_POINT('',(16.25,2.,2.5)); +#86316 = DIRECTION('',(-1.,0.,0.)); +#86317 = DIRECTION('',(0.,0.,1.)); +#86318 = ADVANCED_FACE('',(#86319),#86330,.T.); +#86319 = FACE_BOUND('',#86320,.T.); +#86320 = EDGE_LOOP('',(#86321,#86322,#86323,#86324)); +#86321 = ORIENTED_EDGE('',*,*,#86252,.T.); +#86322 = ORIENTED_EDGE('',*,*,#85202,.T.); +#86323 = ORIENTED_EDGE('',*,*,#86298,.F.); +#86324 = ORIENTED_EDGE('',*,*,#86325,.F.); +#86325 = EDGE_CURVE('',#86253,#86299,#86326,.T.); +#86326 = LINE('',#86327,#86328); +#86327 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86328 = VECTOR('',#86329,1.); +#86329 = DIRECTION('',(1.,0.,0.)); +#86330 = PLANE('',#86331); +#86331 = AXIS2_PLACEMENT_3D('',#86332,#86333,#86334); +#86332 = CARTESIAN_POINT('',(13.75,2.,2.5)); +#86333 = DIRECTION('',(-0.,0.,1.)); +#86334 = DIRECTION('',(1.,0.,0.)); +#86335 = ADVANCED_FACE('',(#86336),#86340,.F.); +#86336 = FACE_BOUND('',#86337,.F.); +#86337 = EDGE_LOOP('',(#86338,#86339)); +#86338 = ORIENTED_EDGE('',*,*,#85807,.T.); +#86339 = ORIENTED_EDGE('',*,*,#85235,.F.); +#86340 = PLANE('',#86341); +#86341 = AXIS2_PLACEMENT_3D('',#86342,#86343,#86344); +#86342 = CARTESIAN_POINT('',(10.,-0.2,5.1)); +#86343 = DIRECTION('',(0.,0.,1.)); +#86344 = DIRECTION('',(1.,0.,-0.)); +#86345 = ADVANCED_FACE('',(#86346),#86371,.T.); +#86346 = FACE_BOUND('',#86347,.T.); +#86347 = EDGE_LOOP('',(#86348,#86356,#86357,#86365)); +#86348 = ORIENTED_EDGE('',*,*,#86349,.T.); +#86349 = EDGE_CURVE('',#86350,#85248,#86352,.T.); +#86350 = VERTEX_POINT('',#86351); +#86351 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86352 = LINE('',#86353,#86354); +#86353 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86354 = VECTOR('',#86355,1.); +#86355 = DIRECTION('',(0.,-1.,0.)); +#86356 = ORIENTED_EDGE('',*,*,#85247,.T.); +#86357 = ORIENTED_EDGE('',*,*,#86358,.F.); +#86358 = EDGE_CURVE('',#86359,#85250,#86361,.T.); +#86359 = VERTEX_POINT('',#86360); +#86360 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86361 = LINE('',#86362,#86363); +#86362 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86363 = VECTOR('',#86364,1.); +#86364 = DIRECTION('',(0.,-1.,0.)); +#86365 = ORIENTED_EDGE('',*,*,#86366,.F.); +#86366 = EDGE_CURVE('',#86350,#86359,#86367,.T.); +#86367 = LINE('',#86368,#86369); +#86368 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86369 = VECTOR('',#86370,1.); +#86370 = DIRECTION('',(0.,0.,-1.)); +#86371 = PLANE('',#86372); +#86372 = AXIS2_PLACEMENT_3D('',#86373,#86374,#86375); +#86373 = CARTESIAN_POINT('',(8.75,2.,5.)); +#86374 = DIRECTION('',(1.,0.,0.)); +#86375 = DIRECTION('',(0.,0.,-1.)); +#86376 = ADVANCED_FACE('',(#86377),#86395,.T.); +#86377 = FACE_BOUND('',#86378,.T.); +#86378 = EDGE_LOOP('',(#86379,#86387,#86388,#86389)); +#86379 = ORIENTED_EDGE('',*,*,#86380,.T.); +#86380 = EDGE_CURVE('',#86381,#85266,#86383,.T.); +#86381 = VERTEX_POINT('',#86382); +#86382 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86383 = LINE('',#86384,#86385); +#86384 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86385 = VECTOR('',#86386,1.); +#86386 = DIRECTION('',(0.,-1.,0.)); +#86387 = ORIENTED_EDGE('',*,*,#85273,.T.); +#86388 = ORIENTED_EDGE('',*,*,#86349,.F.); +#86389 = ORIENTED_EDGE('',*,*,#86390,.F.); +#86390 = EDGE_CURVE('',#86381,#86350,#86391,.T.); +#86391 = LINE('',#86392,#86393); +#86392 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86393 = VECTOR('',#86394,1.); +#86394 = DIRECTION('',(-1.,0.,0.)); +#86395 = PLANE('',#86396); +#86396 = AXIS2_PLACEMENT_3D('',#86397,#86398,#86399); +#86397 = CARTESIAN_POINT('',(11.25,2.,5.)); +#86398 = DIRECTION('',(-0.,-0.,-1.)); +#86399 = DIRECTION('',(-1.,0.,0.)); +#86400 = ADVANCED_FACE('',(#86401),#86419,.T.); +#86401 = FACE_BOUND('',#86402,.T.); +#86402 = EDGE_LOOP('',(#86403,#86411,#86412,#86413)); +#86403 = ORIENTED_EDGE('',*,*,#86404,.T.); +#86404 = EDGE_CURVE('',#86405,#85258,#86407,.T.); +#86405 = VERTEX_POINT('',#86406); +#86406 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86407 = LINE('',#86408,#86409); +#86408 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86409 = VECTOR('',#86410,1.); +#86410 = DIRECTION('',(0.,-1.,0.)); +#86411 = ORIENTED_EDGE('',*,*,#85265,.T.); +#86412 = ORIENTED_EDGE('',*,*,#86380,.F.); +#86413 = ORIENTED_EDGE('',*,*,#86414,.F.); +#86414 = EDGE_CURVE('',#86405,#86381,#86415,.T.); +#86415 = LINE('',#86416,#86417); +#86416 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86417 = VECTOR('',#86418,1.); +#86418 = DIRECTION('',(0.,0.,1.)); +#86419 = PLANE('',#86420); +#86420 = AXIS2_PLACEMENT_3D('',#86421,#86422,#86423); +#86421 = CARTESIAN_POINT('',(11.25,2.,2.5)); +#86422 = DIRECTION('',(-1.,0.,0.)); +#86423 = DIRECTION('',(0.,0.,1.)); +#86424 = ADVANCED_FACE('',(#86425),#86436,.T.); +#86425 = FACE_BOUND('',#86426,.T.); +#86426 = EDGE_LOOP('',(#86427,#86428,#86429,#86430)); +#86427 = ORIENTED_EDGE('',*,*,#86358,.T.); +#86428 = ORIENTED_EDGE('',*,*,#85257,.T.); +#86429 = ORIENTED_EDGE('',*,*,#86404,.F.); +#86430 = ORIENTED_EDGE('',*,*,#86431,.F.); +#86431 = EDGE_CURVE('',#86359,#86405,#86432,.T.); +#86432 = LINE('',#86433,#86434); +#86433 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86434 = VECTOR('',#86435,1.); +#86435 = DIRECTION('',(1.,0.,0.)); +#86436 = PLANE('',#86437); +#86437 = AXIS2_PLACEMENT_3D('',#86438,#86439,#86440); +#86438 = CARTESIAN_POINT('',(8.75,2.,2.5)); +#86439 = DIRECTION('',(-0.,0.,1.)); +#86440 = DIRECTION('',(1.,0.,0.)); +#86441 = ADVANCED_FACE('',(#86442),#86446,.F.); +#86442 = FACE_BOUND('',#86443,.F.); +#86443 = EDGE_LOOP('',(#86444,#86445)); +#86444 = ORIENTED_EDGE('',*,*,#85953,.T.); +#86445 = ORIENTED_EDGE('',*,*,#85290,.F.); +#86446 = PLANE('',#86447); +#86447 = AXIS2_PLACEMENT_3D('',#86448,#86449,#86450); +#86448 = CARTESIAN_POINT('',(5.,-0.2,5.1)); +#86449 = DIRECTION('',(0.,0.,1.)); +#86450 = DIRECTION('',(1.,0.,-0.)); +#86451 = ADVANCED_FACE('',(#86452),#86477,.T.); +#86452 = FACE_BOUND('',#86453,.T.); +#86453 = EDGE_LOOP('',(#86454,#86462,#86463,#86471)); +#86454 = ORIENTED_EDGE('',*,*,#86455,.T.); +#86455 = EDGE_CURVE('',#86456,#85303,#86458,.T.); +#86456 = VERTEX_POINT('',#86457); +#86457 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86458 = LINE('',#86459,#86460); +#86459 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86460 = VECTOR('',#86461,1.); +#86461 = DIRECTION('',(0.,-1.,0.)); +#86462 = ORIENTED_EDGE('',*,*,#85302,.T.); +#86463 = ORIENTED_EDGE('',*,*,#86464,.F.); +#86464 = EDGE_CURVE('',#86465,#85305,#86467,.T.); +#86465 = VERTEX_POINT('',#86466); +#86466 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86467 = LINE('',#86468,#86469); +#86468 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86469 = VECTOR('',#86470,1.); +#86470 = DIRECTION('',(0.,-1.,0.)); +#86471 = ORIENTED_EDGE('',*,*,#86472,.F.); +#86472 = EDGE_CURVE('',#86456,#86465,#86473,.T.); +#86473 = LINE('',#86474,#86475); +#86474 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86475 = VECTOR('',#86476,1.); +#86476 = DIRECTION('',(0.,0.,-1.)); +#86477 = PLANE('',#86478); +#86478 = AXIS2_PLACEMENT_3D('',#86479,#86480,#86481); +#86479 = CARTESIAN_POINT('',(3.75,2.,5.)); +#86480 = DIRECTION('',(1.,0.,0.)); +#86481 = DIRECTION('',(0.,0.,-1.)); +#86482 = ADVANCED_FACE('',(#86483),#86501,.T.); +#86483 = FACE_BOUND('',#86484,.T.); +#86484 = EDGE_LOOP('',(#86485,#86493,#86494,#86495)); +#86485 = ORIENTED_EDGE('',*,*,#86486,.T.); +#86486 = EDGE_CURVE('',#86487,#85321,#86489,.T.); +#86487 = VERTEX_POINT('',#86488); +#86488 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86489 = LINE('',#86490,#86491); +#86490 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86491 = VECTOR('',#86492,1.); +#86492 = DIRECTION('',(0.,-1.,0.)); +#86493 = ORIENTED_EDGE('',*,*,#85328,.T.); +#86494 = ORIENTED_EDGE('',*,*,#86455,.F.); +#86495 = ORIENTED_EDGE('',*,*,#86496,.F.); +#86496 = EDGE_CURVE('',#86487,#86456,#86497,.T.); +#86497 = LINE('',#86498,#86499); +#86498 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86499 = VECTOR('',#86500,1.); +#86500 = DIRECTION('',(-1.,0.,0.)); +#86501 = PLANE('',#86502); +#86502 = AXIS2_PLACEMENT_3D('',#86503,#86504,#86505); +#86503 = CARTESIAN_POINT('',(6.25,2.,5.)); +#86504 = DIRECTION('',(-0.,-0.,-1.)); +#86505 = DIRECTION('',(-1.,0.,0.)); +#86506 = ADVANCED_FACE('',(#86507),#86525,.T.); +#86507 = FACE_BOUND('',#86508,.T.); +#86508 = EDGE_LOOP('',(#86509,#86517,#86518,#86519)); +#86509 = ORIENTED_EDGE('',*,*,#86510,.T.); +#86510 = EDGE_CURVE('',#86511,#85313,#86513,.T.); +#86511 = VERTEX_POINT('',#86512); +#86512 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86513 = LINE('',#86514,#86515); +#86514 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86515 = VECTOR('',#86516,1.); +#86516 = DIRECTION('',(0.,-1.,0.)); +#86517 = ORIENTED_EDGE('',*,*,#85320,.T.); +#86518 = ORIENTED_EDGE('',*,*,#86486,.F.); +#86519 = ORIENTED_EDGE('',*,*,#86520,.F.); +#86520 = EDGE_CURVE('',#86511,#86487,#86521,.T.); +#86521 = LINE('',#86522,#86523); +#86522 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86523 = VECTOR('',#86524,1.); +#86524 = DIRECTION('',(0.,0.,1.)); +#86525 = PLANE('',#86526); +#86526 = AXIS2_PLACEMENT_3D('',#86527,#86528,#86529); +#86527 = CARTESIAN_POINT('',(6.25,2.,2.5)); +#86528 = DIRECTION('',(-1.,0.,0.)); +#86529 = DIRECTION('',(0.,0.,1.)); +#86530 = ADVANCED_FACE('',(#86531),#86542,.T.); +#86531 = FACE_BOUND('',#86532,.T.); +#86532 = EDGE_LOOP('',(#86533,#86534,#86535,#86536)); +#86533 = ORIENTED_EDGE('',*,*,#86464,.T.); +#86534 = ORIENTED_EDGE('',*,*,#85312,.T.); +#86535 = ORIENTED_EDGE('',*,*,#86510,.F.); +#86536 = ORIENTED_EDGE('',*,*,#86537,.F.); +#86537 = EDGE_CURVE('',#86465,#86511,#86538,.T.); +#86538 = LINE('',#86539,#86540); +#86539 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86540 = VECTOR('',#86541,1.); +#86541 = DIRECTION('',(1.,0.,0.)); +#86542 = PLANE('',#86543); +#86543 = AXIS2_PLACEMENT_3D('',#86544,#86545,#86546); +#86544 = CARTESIAN_POINT('',(3.75,2.,2.5)); +#86545 = DIRECTION('',(-0.,0.,1.)); +#86546 = DIRECTION('',(1.,0.,0.)); +#86547 = ADVANCED_FACE('',(#86548),#86552,.F.); +#86548 = FACE_BOUND('',#86549,.F.); +#86549 = EDGE_LOOP('',(#86550,#86551)); +#86550 = ORIENTED_EDGE('',*,*,#86099,.T.); +#86551 = ORIENTED_EDGE('',*,*,#85345,.F.); +#86552 = PLANE('',#86553); +#86553 = AXIS2_PLACEMENT_3D('',#86554,#86555,#86556); +#86554 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,5.1)); +#86555 = DIRECTION('',(0.,0.,1.)); +#86556 = DIRECTION('',(1.,0.,-0.)); +#86557 = ADVANCED_FACE('',(#86558),#86583,.T.); +#86558 = FACE_BOUND('',#86559,.T.); +#86559 = EDGE_LOOP('',(#86560,#86568,#86569,#86577)); +#86560 = ORIENTED_EDGE('',*,*,#86561,.T.); +#86561 = EDGE_CURVE('',#86562,#85358,#86564,.T.); +#86562 = VERTEX_POINT('',#86563); +#86563 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86564 = LINE('',#86565,#86566); +#86565 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86566 = VECTOR('',#86567,1.); +#86567 = DIRECTION('',(0.,-1.,0.)); +#86568 = ORIENTED_EDGE('',*,*,#85357,.T.); +#86569 = ORIENTED_EDGE('',*,*,#86570,.F.); +#86570 = EDGE_CURVE('',#86571,#85360,#86573,.T.); +#86571 = VERTEX_POINT('',#86572); +#86572 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86573 = LINE('',#86574,#86575); +#86574 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86575 = VECTOR('',#86576,1.); +#86576 = DIRECTION('',(0.,-1.,0.)); +#86577 = ORIENTED_EDGE('',*,*,#86578,.F.); +#86578 = EDGE_CURVE('',#86562,#86571,#86579,.T.); +#86579 = LINE('',#86580,#86581); +#86580 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86581 = VECTOR('',#86582,1.); +#86582 = DIRECTION('',(0.,0.,-1.)); +#86583 = PLANE('',#86584); +#86584 = AXIS2_PLACEMENT_3D('',#86585,#86586,#86587); +#86585 = CARTESIAN_POINT('',(-1.25,2.,5.)); +#86586 = DIRECTION('',(1.,0.,0.)); +#86587 = DIRECTION('',(0.,0.,-1.)); +#86588 = ADVANCED_FACE('',(#86589),#86607,.T.); +#86589 = FACE_BOUND('',#86590,.T.); +#86590 = EDGE_LOOP('',(#86591,#86599,#86600,#86601)); +#86591 = ORIENTED_EDGE('',*,*,#86592,.T.); +#86592 = EDGE_CURVE('',#86593,#85376,#86595,.T.); +#86593 = VERTEX_POINT('',#86594); +#86594 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86595 = LINE('',#86596,#86597); +#86596 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86597 = VECTOR('',#86598,1.); +#86598 = DIRECTION('',(0.,-1.,0.)); +#86599 = ORIENTED_EDGE('',*,*,#85383,.T.); +#86600 = ORIENTED_EDGE('',*,*,#86561,.F.); +#86601 = ORIENTED_EDGE('',*,*,#86602,.F.); +#86602 = EDGE_CURVE('',#86593,#86562,#86603,.T.); +#86603 = LINE('',#86604,#86605); +#86604 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86605 = VECTOR('',#86606,1.); +#86606 = DIRECTION('',(-1.,0.,0.)); +#86607 = PLANE('',#86608); +#86608 = AXIS2_PLACEMENT_3D('',#86609,#86610,#86611); +#86609 = CARTESIAN_POINT('',(1.25,2.,5.)); +#86610 = DIRECTION('',(-0.,-0.,-1.)); +#86611 = DIRECTION('',(-1.,0.,0.)); +#86612 = ADVANCED_FACE('',(#86613),#86631,.T.); +#86613 = FACE_BOUND('',#86614,.T.); +#86614 = EDGE_LOOP('',(#86615,#86623,#86624,#86625)); +#86615 = ORIENTED_EDGE('',*,*,#86616,.T.); +#86616 = EDGE_CURVE('',#86617,#85368,#86619,.T.); +#86617 = VERTEX_POINT('',#86618); +#86618 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86619 = LINE('',#86620,#86621); +#86620 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86621 = VECTOR('',#86622,1.); +#86622 = DIRECTION('',(0.,-1.,0.)); +#86623 = ORIENTED_EDGE('',*,*,#85375,.T.); +#86624 = ORIENTED_EDGE('',*,*,#86592,.F.); +#86625 = ORIENTED_EDGE('',*,*,#86626,.F.); +#86626 = EDGE_CURVE('',#86617,#86593,#86627,.T.); +#86627 = LINE('',#86628,#86629); +#86628 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86629 = VECTOR('',#86630,1.); +#86630 = DIRECTION('',(0.,0.,1.)); +#86631 = PLANE('',#86632); +#86632 = AXIS2_PLACEMENT_3D('',#86633,#86634,#86635); +#86633 = CARTESIAN_POINT('',(1.25,2.,2.5)); +#86634 = DIRECTION('',(-1.,0.,0.)); +#86635 = DIRECTION('',(0.,0.,1.)); +#86636 = ADVANCED_FACE('',(#86637),#86648,.T.); +#86637 = FACE_BOUND('',#86638,.T.); +#86638 = EDGE_LOOP('',(#86639,#86640,#86641,#86642)); +#86639 = ORIENTED_EDGE('',*,*,#86570,.T.); +#86640 = ORIENTED_EDGE('',*,*,#85367,.T.); +#86641 = ORIENTED_EDGE('',*,*,#86616,.F.); +#86642 = ORIENTED_EDGE('',*,*,#86643,.F.); +#86643 = EDGE_CURVE('',#86571,#86617,#86644,.T.); +#86644 = LINE('',#86645,#86646); +#86645 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86646 = VECTOR('',#86647,1.); +#86647 = DIRECTION('',(1.,0.,0.)); +#86648 = PLANE('',#86649); +#86649 = AXIS2_PLACEMENT_3D('',#86650,#86651,#86652); +#86650 = CARTESIAN_POINT('',(-1.25,2.,2.5)); +#86651 = DIRECTION('',(-0.,0.,1.)); +#86652 = DIRECTION('',(1.,0.,0.)); +#86653 = ADVANCED_FACE('',(#86654),#86664,.T.); +#86654 = FACE_BOUND('',#86655,.T.); +#86655 = EDGE_LOOP('',(#86656,#86657,#86658)); +#86656 = ORIENTED_EDGE('',*,*,#85422,.T.); +#86657 = ORIENTED_EDGE('',*,*,#85492,.T.); +#86658 = ORIENTED_EDGE('',*,*,#86659,.F.); +#86659 = EDGE_CURVE('',#85423,#85485,#86660,.T.); +#86660 = LINE('',#86661,#86662); +#86661 = CARTESIAN_POINT('',(20.35,-2.2,13.6)); +#86662 = VECTOR('',#86663,1.); +#86663 = DIRECTION('',(0.,1.,0.)); +#86664 = PLANE('',#86665); +#86665 = AXIS2_PLACEMENT_3D('',#86666,#86667,#86668); +#86666 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#86667 = DIRECTION('',(0.,0.,1.)); +#86668 = DIRECTION('',(1.,0.,-0.)); +#86669 = ADVANCED_FACE('',(#86670),#86681,.F.); +#86670 = FACE_BOUND('',#86671,.F.); +#86671 = EDGE_LOOP('',(#86672,#86673,#86674,#86680)); +#86672 = ORIENTED_EDGE('',*,*,#86659,.F.); +#86673 = ORIENTED_EDGE('',*,*,#85433,.T.); +#86674 = ORIENTED_EDGE('',*,*,#86675,.T.); +#86675 = EDGE_CURVE('',#85434,#85476,#86676,.T.); +#86676 = LINE('',#86677,#86678); +#86677 = CARTESIAN_POINT('',(20.35,-2.2,12.9)); +#86678 = VECTOR('',#86679,1.); +#86679 = DIRECTION('',(0.,1.,0.)); +#86680 = ORIENTED_EDGE('',*,*,#85484,.F.); +#86681 = PLANE('',#86682); +#86682 = AXIS2_PLACEMENT_3D('',#86683,#86684,#86685); +#86683 = CARTESIAN_POINT('',(20.35,-2.2,13.6)); +#86684 = DIRECTION('',(1.,0.,0.)); +#86685 = DIRECTION('',(-0.,1.,0.)); +#86686 = ADVANCED_FACE('',(#86687),#86698,.T.); +#86687 = FACE_BOUND('',#86688,.T.); +#86688 = EDGE_LOOP('',(#86689,#86695,#86696,#86697)); +#86689 = ORIENTED_EDGE('',*,*,#86690,.T.); +#86690 = EDGE_CURVE('',#85468,#85442,#86691,.T.); +#86691 = LINE('',#86692,#86693); +#86692 = CARTESIAN_POINT('',(19.65,1.8,12.9)); +#86693 = VECTOR('',#86694,1.); +#86694 = DIRECTION('',(0.,-1.,0.)); +#86695 = ORIENTED_EDGE('',*,*,#85441,.F.); +#86696 = ORIENTED_EDGE('',*,*,#86675,.T.); +#86697 = ORIENTED_EDGE('',*,*,#85475,.F.); +#86698 = PLANE('',#86699); +#86699 = AXIS2_PLACEMENT_3D('',#86700,#86701,#86702); +#86700 = CARTESIAN_POINT('',(20.,-0.2,12.9)); +#86701 = DIRECTION('',(0.,0.,1.)); +#86702 = DIRECTION('',(1.,0.,-0.)); +#86703 = ADVANCED_FACE('',(#86704),#86715,.F.); +#86704 = FACE_BOUND('',#86705,.F.); +#86705 = EDGE_LOOP('',(#86706,#86712,#86713,#86714)); +#86706 = ORIENTED_EDGE('',*,*,#86707,.F.); +#86707 = EDGE_CURVE('',#85459,#85451,#86708,.T.); +#86708 = LINE('',#86709,#86710); +#86709 = CARTESIAN_POINT('',(19.65,1.8,13.6)); +#86710 = VECTOR('',#86711,1.); +#86711 = DIRECTION('',(0.,-1.,0.)); +#86712 = ORIENTED_EDGE('',*,*,#85467,.T.); +#86713 = ORIENTED_EDGE('',*,*,#86690,.T.); +#86714 = ORIENTED_EDGE('',*,*,#85450,.F.); +#86715 = PLANE('',#86716); +#86716 = AXIS2_PLACEMENT_3D('',#86717,#86718,#86719); +#86717 = CARTESIAN_POINT('',(19.65,1.8,13.6)); +#86718 = DIRECTION('',(-1.,0.,0.)); +#86719 = DIRECTION('',(0.,-1.,0.)); +#86720 = ADVANCED_FACE('',(#86721),#86725,.T.); +#86721 = FACE_BOUND('',#86722,.T.); +#86722 = EDGE_LOOP('',(#86723,#86724)); +#86723 = ORIENTED_EDGE('',*,*,#86707,.F.); +#86724 = ORIENTED_EDGE('',*,*,#85458,.T.); +#86725 = PLANE('',#86726); +#86726 = AXIS2_PLACEMENT_3D('',#86727,#86728,#86729); +#86727 = CARTESIAN_POINT('',(20.,-0.2,13.6)); +#86728 = DIRECTION('',(0.,0.,1.)); +#86729 = DIRECTION('',(1.,0.,-0.)); +#86730 = ADVANCED_FACE('',(#86731),#86741,.T.); +#86731 = FACE_BOUND('',#86732,.T.); +#86732 = EDGE_LOOP('',(#86733,#86734,#86735)); +#86733 = ORIENTED_EDGE('',*,*,#85568,.T.); +#86734 = ORIENTED_EDGE('',*,*,#85638,.T.); +#86735 = ORIENTED_EDGE('',*,*,#86736,.F.); +#86736 = EDGE_CURVE('',#85569,#85631,#86737,.T.); +#86737 = LINE('',#86738,#86739); +#86738 = CARTESIAN_POINT('',(15.35,-2.2,13.6)); +#86739 = VECTOR('',#86740,1.); +#86740 = DIRECTION('',(0.,1.,0.)); +#86741 = PLANE('',#86742); +#86742 = AXIS2_PLACEMENT_3D('',#86743,#86744,#86745); +#86743 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#86744 = DIRECTION('',(0.,0.,1.)); +#86745 = DIRECTION('',(1.,0.,-0.)); +#86746 = ADVANCED_FACE('',(#86747),#86758,.F.); +#86747 = FACE_BOUND('',#86748,.F.); +#86748 = EDGE_LOOP('',(#86749,#86750,#86751,#86757)); +#86749 = ORIENTED_EDGE('',*,*,#86736,.F.); +#86750 = ORIENTED_EDGE('',*,*,#85579,.T.); +#86751 = ORIENTED_EDGE('',*,*,#86752,.T.); +#86752 = EDGE_CURVE('',#85580,#85622,#86753,.T.); +#86753 = LINE('',#86754,#86755); +#86754 = CARTESIAN_POINT('',(15.35,-2.2,12.9)); +#86755 = VECTOR('',#86756,1.); +#86756 = DIRECTION('',(0.,1.,0.)); +#86757 = ORIENTED_EDGE('',*,*,#85630,.F.); +#86758 = PLANE('',#86759); +#86759 = AXIS2_PLACEMENT_3D('',#86760,#86761,#86762); +#86760 = CARTESIAN_POINT('',(15.35,-2.2,13.6)); +#86761 = DIRECTION('',(1.,0.,0.)); +#86762 = DIRECTION('',(-0.,1.,0.)); +#86763 = ADVANCED_FACE('',(#86764),#86775,.T.); +#86764 = FACE_BOUND('',#86765,.T.); +#86765 = EDGE_LOOP('',(#86766,#86772,#86773,#86774)); +#86766 = ORIENTED_EDGE('',*,*,#86767,.T.); +#86767 = EDGE_CURVE('',#85614,#85588,#86768,.T.); +#86768 = LINE('',#86769,#86770); +#86769 = CARTESIAN_POINT('',(14.65,1.8,12.9)); +#86770 = VECTOR('',#86771,1.); +#86771 = DIRECTION('',(0.,-1.,0.)); +#86772 = ORIENTED_EDGE('',*,*,#85587,.F.); +#86773 = ORIENTED_EDGE('',*,*,#86752,.T.); +#86774 = ORIENTED_EDGE('',*,*,#85621,.F.); +#86775 = PLANE('',#86776); +#86776 = AXIS2_PLACEMENT_3D('',#86777,#86778,#86779); +#86777 = CARTESIAN_POINT('',(15.,-0.2,12.9)); +#86778 = DIRECTION('',(0.,0.,1.)); +#86779 = DIRECTION('',(1.,0.,-0.)); +#86780 = ADVANCED_FACE('',(#86781),#86792,.F.); +#86781 = FACE_BOUND('',#86782,.F.); +#86782 = EDGE_LOOP('',(#86783,#86789,#86790,#86791)); +#86783 = ORIENTED_EDGE('',*,*,#86784,.F.); +#86784 = EDGE_CURVE('',#85605,#85597,#86785,.T.); +#86785 = LINE('',#86786,#86787); +#86786 = CARTESIAN_POINT('',(14.65,1.8,13.6)); +#86787 = VECTOR('',#86788,1.); +#86788 = DIRECTION('',(0.,-1.,0.)); +#86789 = ORIENTED_EDGE('',*,*,#85613,.T.); +#86790 = ORIENTED_EDGE('',*,*,#86767,.T.); +#86791 = ORIENTED_EDGE('',*,*,#85596,.F.); +#86792 = PLANE('',#86793); +#86793 = AXIS2_PLACEMENT_3D('',#86794,#86795,#86796); +#86794 = CARTESIAN_POINT('',(14.65,1.8,13.6)); +#86795 = DIRECTION('',(-1.,0.,0.)); +#86796 = DIRECTION('',(0.,-1.,0.)); +#86797 = ADVANCED_FACE('',(#86798),#86802,.T.); +#86798 = FACE_BOUND('',#86799,.T.); +#86799 = EDGE_LOOP('',(#86800,#86801)); +#86800 = ORIENTED_EDGE('',*,*,#86784,.F.); +#86801 = ORIENTED_EDGE('',*,*,#85604,.T.); +#86802 = PLANE('',#86803); +#86803 = AXIS2_PLACEMENT_3D('',#86804,#86805,#86806); +#86804 = CARTESIAN_POINT('',(15.,-0.2,13.6)); +#86805 = DIRECTION('',(0.,0.,1.)); +#86806 = DIRECTION('',(1.,0.,-0.)); +#86807 = ADVANCED_FACE('',(#86808),#86818,.T.); +#86808 = FACE_BOUND('',#86809,.T.); +#86809 = EDGE_LOOP('',(#86810,#86811,#86812)); +#86810 = ORIENTED_EDGE('',*,*,#85714,.T.); +#86811 = ORIENTED_EDGE('',*,*,#85784,.T.); +#86812 = ORIENTED_EDGE('',*,*,#86813,.F.); +#86813 = EDGE_CURVE('',#85715,#85777,#86814,.T.); +#86814 = LINE('',#86815,#86816); +#86815 = CARTESIAN_POINT('',(10.35,-2.2,13.6)); +#86816 = VECTOR('',#86817,1.); +#86817 = DIRECTION('',(0.,1.,0.)); +#86818 = PLANE('',#86819); +#86819 = AXIS2_PLACEMENT_3D('',#86820,#86821,#86822); +#86820 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#86821 = DIRECTION('',(0.,0.,1.)); +#86822 = DIRECTION('',(1.,0.,-0.)); +#86823 = ADVANCED_FACE('',(#86824),#86835,.F.); +#86824 = FACE_BOUND('',#86825,.F.); +#86825 = EDGE_LOOP('',(#86826,#86827,#86828,#86834)); +#86826 = ORIENTED_EDGE('',*,*,#86813,.F.); +#86827 = ORIENTED_EDGE('',*,*,#85725,.T.); +#86828 = ORIENTED_EDGE('',*,*,#86829,.T.); +#86829 = EDGE_CURVE('',#85726,#85768,#86830,.T.); +#86830 = LINE('',#86831,#86832); +#86831 = CARTESIAN_POINT('',(10.35,-2.2,12.9)); +#86832 = VECTOR('',#86833,1.); +#86833 = DIRECTION('',(0.,1.,0.)); +#86834 = ORIENTED_EDGE('',*,*,#85776,.F.); +#86835 = PLANE('',#86836); +#86836 = AXIS2_PLACEMENT_3D('',#86837,#86838,#86839); +#86837 = CARTESIAN_POINT('',(10.35,-2.2,13.6)); +#86838 = DIRECTION('',(1.,0.,0.)); +#86839 = DIRECTION('',(-0.,1.,0.)); +#86840 = ADVANCED_FACE('',(#86841),#86852,.T.); +#86841 = FACE_BOUND('',#86842,.T.); +#86842 = EDGE_LOOP('',(#86843,#86849,#86850,#86851)); +#86843 = ORIENTED_EDGE('',*,*,#86844,.T.); +#86844 = EDGE_CURVE('',#85760,#85734,#86845,.T.); +#86845 = LINE('',#86846,#86847); +#86846 = CARTESIAN_POINT('',(9.65,1.8,12.9)); +#86847 = VECTOR('',#86848,1.); +#86848 = DIRECTION('',(0.,-1.,0.)); +#86849 = ORIENTED_EDGE('',*,*,#85733,.F.); +#86850 = ORIENTED_EDGE('',*,*,#86829,.T.); +#86851 = ORIENTED_EDGE('',*,*,#85767,.F.); +#86852 = PLANE('',#86853); +#86853 = AXIS2_PLACEMENT_3D('',#86854,#86855,#86856); +#86854 = CARTESIAN_POINT('',(10.,-0.2,12.9)); +#86855 = DIRECTION('',(0.,0.,1.)); +#86856 = DIRECTION('',(1.,0.,-0.)); +#86857 = ADVANCED_FACE('',(#86858),#86869,.F.); +#86858 = FACE_BOUND('',#86859,.F.); +#86859 = EDGE_LOOP('',(#86860,#86866,#86867,#86868)); +#86860 = ORIENTED_EDGE('',*,*,#86861,.F.); +#86861 = EDGE_CURVE('',#85751,#85743,#86862,.T.); +#86862 = LINE('',#86863,#86864); +#86863 = CARTESIAN_POINT('',(9.65,1.8,13.6)); +#86864 = VECTOR('',#86865,1.); +#86865 = DIRECTION('',(0.,-1.,0.)); +#86866 = ORIENTED_EDGE('',*,*,#85759,.T.); +#86867 = ORIENTED_EDGE('',*,*,#86844,.T.); +#86868 = ORIENTED_EDGE('',*,*,#85742,.F.); +#86869 = PLANE('',#86870); +#86870 = AXIS2_PLACEMENT_3D('',#86871,#86872,#86873); +#86871 = CARTESIAN_POINT('',(9.65,1.8,13.6)); +#86872 = DIRECTION('',(-1.,0.,0.)); +#86873 = DIRECTION('',(0.,-1.,0.)); +#86874 = ADVANCED_FACE('',(#86875),#86879,.T.); +#86875 = FACE_BOUND('',#86876,.T.); +#86876 = EDGE_LOOP('',(#86877,#86878)); +#86877 = ORIENTED_EDGE('',*,*,#86861,.F.); +#86878 = ORIENTED_EDGE('',*,*,#85750,.T.); +#86879 = PLANE('',#86880); +#86880 = AXIS2_PLACEMENT_3D('',#86881,#86882,#86883); +#86881 = CARTESIAN_POINT('',(10.,-0.2,13.6)); +#86882 = DIRECTION('',(0.,0.,1.)); +#86883 = DIRECTION('',(1.,0.,-0.)); +#86884 = ADVANCED_FACE('',(#86885),#86895,.T.); +#86885 = FACE_BOUND('',#86886,.T.); +#86886 = EDGE_LOOP('',(#86887,#86888,#86889)); +#86887 = ORIENTED_EDGE('',*,*,#85860,.T.); +#86888 = ORIENTED_EDGE('',*,*,#85930,.T.); +#86889 = ORIENTED_EDGE('',*,*,#86890,.F.); +#86890 = EDGE_CURVE('',#85861,#85923,#86891,.T.); +#86891 = LINE('',#86892,#86893); +#86892 = CARTESIAN_POINT('',(5.35,-2.2,13.6)); +#86893 = VECTOR('',#86894,1.); +#86894 = DIRECTION('',(0.,1.,0.)); +#86895 = PLANE('',#86896); +#86896 = AXIS2_PLACEMENT_3D('',#86897,#86898,#86899); +#86897 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#86898 = DIRECTION('',(0.,0.,1.)); +#86899 = DIRECTION('',(1.,0.,-0.)); +#86900 = ADVANCED_FACE('',(#86901),#86912,.F.); +#86901 = FACE_BOUND('',#86902,.F.); +#86902 = EDGE_LOOP('',(#86903,#86904,#86905,#86911)); +#86903 = ORIENTED_EDGE('',*,*,#86890,.F.); +#86904 = ORIENTED_EDGE('',*,*,#85871,.T.); +#86905 = ORIENTED_EDGE('',*,*,#86906,.T.); +#86906 = EDGE_CURVE('',#85872,#85914,#86907,.T.); +#86907 = LINE('',#86908,#86909); +#86908 = CARTESIAN_POINT('',(5.35,-2.2,12.9)); +#86909 = VECTOR('',#86910,1.); +#86910 = DIRECTION('',(0.,1.,0.)); +#86911 = ORIENTED_EDGE('',*,*,#85922,.F.); +#86912 = PLANE('',#86913); +#86913 = AXIS2_PLACEMENT_3D('',#86914,#86915,#86916); +#86914 = CARTESIAN_POINT('',(5.35,-2.2,13.6)); +#86915 = DIRECTION('',(1.,0.,0.)); +#86916 = DIRECTION('',(-0.,1.,0.)); +#86917 = ADVANCED_FACE('',(#86918),#86929,.T.); +#86918 = FACE_BOUND('',#86919,.T.); +#86919 = EDGE_LOOP('',(#86920,#86926,#86927,#86928)); +#86920 = ORIENTED_EDGE('',*,*,#86921,.T.); +#86921 = EDGE_CURVE('',#85906,#85880,#86922,.T.); +#86922 = LINE('',#86923,#86924); +#86923 = CARTESIAN_POINT('',(4.65,1.8,12.9)); +#86924 = VECTOR('',#86925,1.); +#86925 = DIRECTION('',(0.,-1.,0.)); +#86926 = ORIENTED_EDGE('',*,*,#85879,.F.); +#86927 = ORIENTED_EDGE('',*,*,#86906,.T.); +#86928 = ORIENTED_EDGE('',*,*,#85913,.F.); +#86929 = PLANE('',#86930); +#86930 = AXIS2_PLACEMENT_3D('',#86931,#86932,#86933); +#86931 = CARTESIAN_POINT('',(5.,-0.2,12.9)); +#86932 = DIRECTION('',(0.,0.,1.)); +#86933 = DIRECTION('',(1.,0.,-0.)); +#86934 = ADVANCED_FACE('',(#86935),#86946,.F.); +#86935 = FACE_BOUND('',#86936,.F.); +#86936 = EDGE_LOOP('',(#86937,#86943,#86944,#86945)); +#86937 = ORIENTED_EDGE('',*,*,#86938,.F.); +#86938 = EDGE_CURVE('',#85897,#85889,#86939,.T.); +#86939 = LINE('',#86940,#86941); +#86940 = CARTESIAN_POINT('',(4.65,1.8,13.6)); +#86941 = VECTOR('',#86942,1.); +#86942 = DIRECTION('',(0.,-1.,0.)); +#86943 = ORIENTED_EDGE('',*,*,#85905,.T.); +#86944 = ORIENTED_EDGE('',*,*,#86921,.T.); +#86945 = ORIENTED_EDGE('',*,*,#85888,.F.); +#86946 = PLANE('',#86947); +#86947 = AXIS2_PLACEMENT_3D('',#86948,#86949,#86950); +#86948 = CARTESIAN_POINT('',(4.65,1.8,13.6)); +#86949 = DIRECTION('',(-1.,0.,0.)); +#86950 = DIRECTION('',(0.,-1.,0.)); +#86951 = ADVANCED_FACE('',(#86952),#86956,.T.); +#86952 = FACE_BOUND('',#86953,.T.); +#86953 = EDGE_LOOP('',(#86954,#86955)); +#86954 = ORIENTED_EDGE('',*,*,#86938,.F.); +#86955 = ORIENTED_EDGE('',*,*,#85896,.T.); +#86956 = PLANE('',#86957); +#86957 = AXIS2_PLACEMENT_3D('',#86958,#86959,#86960); +#86958 = CARTESIAN_POINT('',(5.,-0.2,13.6)); +#86959 = DIRECTION('',(0.,0.,1.)); +#86960 = DIRECTION('',(1.,0.,-0.)); +#86961 = ADVANCED_FACE('',(#86962),#86972,.T.); +#86962 = FACE_BOUND('',#86963,.T.); +#86963 = EDGE_LOOP('',(#86964,#86965,#86966)); +#86964 = ORIENTED_EDGE('',*,*,#86006,.T.); +#86965 = ORIENTED_EDGE('',*,*,#86076,.T.); +#86966 = ORIENTED_EDGE('',*,*,#86967,.F.); +#86967 = EDGE_CURVE('',#86007,#86069,#86968,.T.); +#86968 = LINE('',#86969,#86970); +#86969 = CARTESIAN_POINT('',(0.35,-2.2,13.6)); +#86970 = VECTOR('',#86971,1.); +#86971 = DIRECTION('',(0.,1.,0.)); +#86972 = PLANE('',#86973); +#86973 = AXIS2_PLACEMENT_3D('',#86974,#86975,#86976); +#86974 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,13.6)); +#86975 = DIRECTION('',(0.,0.,1.)); +#86976 = DIRECTION('',(1.,0.,-0.)); +#86977 = ADVANCED_FACE('',(#86978),#86989,.F.); +#86978 = FACE_BOUND('',#86979,.F.); +#86979 = EDGE_LOOP('',(#86980,#86981,#86982,#86988)); +#86980 = ORIENTED_EDGE('',*,*,#86967,.F.); +#86981 = ORIENTED_EDGE('',*,*,#86017,.T.); +#86982 = ORIENTED_EDGE('',*,*,#86983,.T.); +#86983 = EDGE_CURVE('',#86018,#86060,#86984,.T.); +#86984 = LINE('',#86985,#86986); +#86985 = CARTESIAN_POINT('',(0.35,-2.2,12.9)); +#86986 = VECTOR('',#86987,1.); +#86987 = DIRECTION('',(0.,1.,0.)); +#86988 = ORIENTED_EDGE('',*,*,#86068,.F.); +#86989 = PLANE('',#86990); +#86990 = AXIS2_PLACEMENT_3D('',#86991,#86992,#86993); +#86991 = CARTESIAN_POINT('',(0.35,-2.2,13.6)); +#86992 = DIRECTION('',(1.,0.,0.)); +#86993 = DIRECTION('',(-0.,1.,0.)); +#86994 = ADVANCED_FACE('',(#86995),#87006,.T.); +#86995 = FACE_BOUND('',#86996,.T.); +#86996 = EDGE_LOOP('',(#86997,#87003,#87004,#87005)); +#86997 = ORIENTED_EDGE('',*,*,#86998,.T.); +#86998 = EDGE_CURVE('',#86052,#86026,#86999,.T.); +#86999 = LINE('',#87000,#87001); +#87000 = CARTESIAN_POINT('',(-0.35,1.8,12.9)); +#87001 = VECTOR('',#87002,1.); +#87002 = DIRECTION('',(0.,-1.,0.)); +#87003 = ORIENTED_EDGE('',*,*,#86025,.F.); +#87004 = ORIENTED_EDGE('',*,*,#86983,.T.); +#87005 = ORIENTED_EDGE('',*,*,#86059,.F.); +#87006 = PLANE('',#87007); +#87007 = AXIS2_PLACEMENT_3D('',#87008,#87009,#87010); +#87008 = CARTESIAN_POINT('',(0.,-0.2,12.9)); +#87009 = DIRECTION('',(0.,0.,1.)); +#87010 = DIRECTION('',(1.,0.,-0.)); +#87011 = ADVANCED_FACE('',(#87012),#87023,.F.); +#87012 = FACE_BOUND('',#87013,.F.); +#87013 = EDGE_LOOP('',(#87014,#87020,#87021,#87022)); +#87014 = ORIENTED_EDGE('',*,*,#87015,.F.); +#87015 = EDGE_CURVE('',#86043,#86035,#87016,.T.); +#87016 = LINE('',#87017,#87018); +#87017 = CARTESIAN_POINT('',(-0.35,1.8,13.6)); +#87018 = VECTOR('',#87019,1.); +#87019 = DIRECTION('',(0.,-1.,0.)); +#87020 = ORIENTED_EDGE('',*,*,#86051,.T.); +#87021 = ORIENTED_EDGE('',*,*,#86998,.T.); +#87022 = ORIENTED_EDGE('',*,*,#86034,.F.); +#87023 = PLANE('',#87024); +#87024 = AXIS2_PLACEMENT_3D('',#87025,#87026,#87027); +#87025 = CARTESIAN_POINT('',(-0.35,1.8,13.6)); +#87026 = DIRECTION('',(-1.,0.,0.)); +#87027 = DIRECTION('',(0.,-1.,0.)); +#87028 = ADVANCED_FACE('',(#87029),#87033,.T.); +#87029 = FACE_BOUND('',#87030,.T.); +#87030 = EDGE_LOOP('',(#87031,#87032)); +#87031 = ORIENTED_EDGE('',*,*,#87015,.F.); +#87032 = ORIENTED_EDGE('',*,*,#86042,.T.); +#87033 = PLANE('',#87034); +#87034 = AXIS2_PLACEMENT_3D('',#87035,#87036,#87037); +#87035 = CARTESIAN_POINT('',(-1.799263332289E-16,-0.2,13.6)); +#87036 = DIRECTION('',(0.,0.,1.)); +#87037 = DIRECTION('',(1.,0.,-0.)); +#87038 = ADVANCED_FACE('',(#87039),#87045,.T.); +#87039 = FACE_BOUND('',#87040,.T.); +#87040 = EDGE_LOOP('',(#87041,#87042,#87043,#87044)); +#87041 = ORIENTED_EDGE('',*,*,#86178,.T.); +#87042 = ORIENTED_EDGE('',*,*,#86154,.T.); +#87043 = ORIENTED_EDGE('',*,*,#86219,.T.); +#87044 = ORIENTED_EDGE('',*,*,#86202,.T.); +#87045 = PLANE('',#87046); +#87046 = AXIS2_PLACEMENT_3D('',#87047,#87048,#87049); +#87047 = CARTESIAN_POINT('',(20.,2.,3.75)); +#87048 = DIRECTION('',(-0.,-1.,-0.)); +#87049 = DIRECTION('',(0.,0.,-1.)); +#87050 = ADVANCED_FACE('',(#87051),#87057,.T.); +#87051 = FACE_BOUND('',#87052,.T.); +#87052 = EDGE_LOOP('',(#87053,#87054,#87055,#87056)); +#87053 = ORIENTED_EDGE('',*,*,#86284,.T.); +#87054 = ORIENTED_EDGE('',*,*,#86260,.T.); +#87055 = ORIENTED_EDGE('',*,*,#86325,.T.); +#87056 = ORIENTED_EDGE('',*,*,#86308,.T.); +#87057 = PLANE('',#87058); +#87058 = AXIS2_PLACEMENT_3D('',#87059,#87060,#87061); +#87059 = CARTESIAN_POINT('',(15.,2.,3.75)); +#87060 = DIRECTION('',(-0.,-1.,-0.)); +#87061 = DIRECTION('',(0.,0.,-1.)); +#87062 = ADVANCED_FACE('',(#87063),#87069,.T.); +#87063 = FACE_BOUND('',#87064,.T.); +#87064 = EDGE_LOOP('',(#87065,#87066,#87067,#87068)); +#87065 = ORIENTED_EDGE('',*,*,#86390,.T.); +#87066 = ORIENTED_EDGE('',*,*,#86366,.T.); +#87067 = ORIENTED_EDGE('',*,*,#86431,.T.); +#87068 = ORIENTED_EDGE('',*,*,#86414,.T.); +#87069 = PLANE('',#87070); +#87070 = AXIS2_PLACEMENT_3D('',#87071,#87072,#87073); +#87071 = CARTESIAN_POINT('',(10.,2.,3.75)); +#87072 = DIRECTION('',(-0.,-1.,-0.)); +#87073 = DIRECTION('',(0.,0.,-1.)); +#87074 = ADVANCED_FACE('',(#87075),#87081,.T.); +#87075 = FACE_BOUND('',#87076,.T.); +#87076 = EDGE_LOOP('',(#87077,#87078,#87079,#87080)); +#87077 = ORIENTED_EDGE('',*,*,#86496,.T.); +#87078 = ORIENTED_EDGE('',*,*,#86472,.T.); +#87079 = ORIENTED_EDGE('',*,*,#86537,.T.); +#87080 = ORIENTED_EDGE('',*,*,#86520,.T.); +#87081 = PLANE('',#87082); +#87082 = AXIS2_PLACEMENT_3D('',#87083,#87084,#87085); +#87083 = CARTESIAN_POINT('',(5.,2.,3.75)); +#87084 = DIRECTION('',(-0.,-1.,-0.)); +#87085 = DIRECTION('',(0.,0.,-1.)); +#87086 = ADVANCED_FACE('',(#87087),#87093,.T.); +#87087 = FACE_BOUND('',#87088,.T.); +#87088 = EDGE_LOOP('',(#87089,#87090,#87091,#87092)); +#87089 = ORIENTED_EDGE('',*,*,#86602,.T.); +#87090 = ORIENTED_EDGE('',*,*,#86578,.T.); +#87091 = ORIENTED_EDGE('',*,*,#86643,.T.); +#87092 = ORIENTED_EDGE('',*,*,#86626,.T.); +#87093 = PLANE('',#87094); +#87094 = AXIS2_PLACEMENT_3D('',#87095,#87096,#87097); +#87095 = CARTESIAN_POINT('',(4.440892098501E-16,2.,3.75)); +#87096 = DIRECTION('',(-0.,-1.,-0.)); +#87097 = DIRECTION('',(0.,0.,-1.)); +#87098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#87102)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#87099,#87100,#87101)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#87099 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#87100 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#87101 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#87102 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#87099, + 'distance_accuracy_value','confusion accuracy'); +#87103 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#87104,#87106); +#87104 = ( REPRESENTATION_RELATIONSHIP('','',#81314,#81291) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#87105) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#87105 = ITEM_DEFINED_TRANSFORMATION('','',#11,#81292); +#87106 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #87107); +#87107 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('94','=>[0:1:1:43]','',#81286, + #81309,$); +#87108 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#81311)); +#87109 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#87110,#87112); +#87110 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#87111) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#87111 = ITEM_DEFINED_TRANSFORMATION('','',#11,#311); +#87112 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #87113); +#87113 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('96','R52','',#5,#523,$); +#87114 = SHAPE_DEFINITION_REPRESENTATION(#87115,#87121); +#87115 = PRODUCT_DEFINITION_SHAPE('','',#87116); +#87116 = PRODUCT_DEFINITION('design','',#87117,#87120); +#87117 = PRODUCT_DEFINITION_FORMATION('','',#87118); +#87118 = PRODUCT('Relay_SPDT_Omron_G5V-1','Relay_SPDT_Omron_G5V-1','',( + #87119)); +#87119 = PRODUCT_CONTEXT('',#2,'mechanical'); +#87120 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#87121 = SHAPE_REPRESENTATION('',(#11,#87122),#87126); +#87122 = AXIS2_PLACEMENT_3D('',#87123,#87124,#87125); +#87123 = CARTESIAN_POINT('',(0.,0.,0.)); +#87124 = DIRECTION('',(0.,0.,1.)); +#87125 = DIRECTION('',(1.,0.,-0.)); +#87126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#87130)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#87127,#87128,#87129)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#87127 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#87128 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#87129 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#87130 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#87127, + 'distance_accuracy_value','confusion accuracy'); +#87131 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#87132,#87134); +#87132 = ( REPRESENTATION_RELATIONSHIP('','',#87121,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#87133) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#87133 = ITEM_DEFINED_TRANSFORMATION('','',#11,#315); +#87134 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #87135); +#87135 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('98','K1','',#5,#87116,$); +#87136 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#87118)); +#87137 = SHAPE_DEFINITION_REPRESENTATION(#87138,#87144); +#87138 = PRODUCT_DEFINITION_SHAPE('','',#87139); +#87139 = PRODUCT_DEFINITION('design','',#87140,#87143); +#87140 = PRODUCT_DEFINITION_FORMATION('','',#87141); +#87141 = PRODUCT('Relay_SPDT_Omron_G5V-1','Relay_SPDT_Omron_G5V-1','',( + #87142)); +#87142 = PRODUCT_CONTEXT('',#2,'mechanical'); +#87143 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#87144 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#87145),#88945); +#87145 = MANIFOLD_SOLID_BREP('',#87146); +#87146 = CLOSED_SHELL('',(#87147,#87211,#87251,#87276,#87300,#87399, + #87432,#87770,#87861,#87910,#87935,#87953,#87970,#87987,#88004, + #88021,#88038,#88062,#88072,#88096,#88106,#88130,#88140,#88164, + #88174,#88205,#88229,#88253,#88270,#88301,#88325,#88349,#88366, + #88397,#88421,#88445,#88462,#88493,#88517,#88541,#88558,#88589, + #88613,#88637,#88654,#88685,#88709,#88733,#88750,#88774,#88791, + #88808,#88821,#88833,#88843,#88853,#88863,#88873,#88885,#88897, + #88909,#88921,#88933)); +#87147 = ADVANCED_FACE('',(#87148),#87206,.F.); +#87148 = FACE_BOUND('',#87149,.F.); +#87149 = EDGE_LOOP('',(#87150,#87160,#87168,#87176,#87184,#87192,#87200) + ); +#87150 = ORIENTED_EDGE('',*,*,#87151,.F.); +#87151 = EDGE_CURVE('',#87152,#87154,#87156,.T.); +#87152 = VERTEX_POINT('',#87153); +#87153 = CARTESIAN_POINT('',(4.6,1.07,9.85)); +#87154 = VERTEX_POINT('',#87155); +#87155 = CARTESIAN_POINT('',(4.69,1.07,9.76)); +#87156 = LINE('',#87157,#87158); +#87157 = CARTESIAN_POINT('',(7.32,1.07,7.13)); +#87158 = VECTOR('',#87159,1.); +#87159 = DIRECTION('',(0.707106781187,-6.280369834731E-16, + -0.707106781187)); +#87160 = ORIENTED_EDGE('',*,*,#87161,.T.); +#87161 = EDGE_CURVE('',#87152,#87162,#87164,.T.); +#87162 = VERTEX_POINT('',#87163); +#87163 = CARTESIAN_POINT('',(-1.11,1.07,9.85)); +#87164 = LINE('',#87165,#87166); +#87165 = CARTESIAN_POINT('',(4.45,1.07,9.85)); +#87166 = VECTOR('',#87167,1.); +#87167 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87168 = ORIENTED_EDGE('',*,*,#87169,.F.); +#87169 = EDGE_CURVE('',#87170,#87162,#87172,.T.); +#87170 = VERTEX_POINT('',#87171); +#87171 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87172 = LINE('',#87173,#87174); +#87173 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87174 = VECTOR('',#87175,1.); +#87175 = DIRECTION('',(0.,0.,1.)); +#87176 = ORIENTED_EDGE('',*,*,#87177,.F.); +#87177 = EDGE_CURVE('',#87178,#87170,#87180,.T.); +#87178 = VERTEX_POINT('',#87179); +#87179 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87180 = LINE('',#87181,#87182); +#87181 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87182 = VECTOR('',#87183,1.); +#87183 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87184 = ORIENTED_EDGE('',*,*,#87185,.T.); +#87185 = EDGE_CURVE('',#87178,#87186,#87188,.T.); +#87186 = VERTEX_POINT('',#87187); +#87187 = CARTESIAN_POINT('',(6.19,1.07,9.75)); +#87188 = LINE('',#87189,#87190); +#87189 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87190 = VECTOR('',#87191,1.); +#87191 = DIRECTION('',(0.,0.,1.)); +#87192 = ORIENTED_EDGE('',*,*,#87193,.F.); +#87193 = EDGE_CURVE('',#87194,#87186,#87196,.T.); +#87194 = VERTEX_POINT('',#87195); +#87195 = CARTESIAN_POINT('',(4.69,1.07,9.75)); +#87196 = LINE('',#87197,#87198); +#87197 = CARTESIAN_POINT('',(4.69,1.07,9.75)); +#87198 = VECTOR('',#87199,1.); +#87199 = DIRECTION('',(1.,3.330669073875E-16,0.)); +#87200 = ORIENTED_EDGE('',*,*,#87201,.F.); +#87201 = EDGE_CURVE('',#87154,#87194,#87202,.T.); +#87202 = LINE('',#87203,#87204); +#87203 = CARTESIAN_POINT('',(4.69,1.07,10.)); +#87204 = VECTOR('',#87205,1.); +#87205 = DIRECTION('',(-0.,0.,-1.)); +#87206 = PLANE('',#87207); +#87207 = AXIS2_PLACEMENT_3D('',#87208,#87209,#87210); +#87208 = CARTESIAN_POINT('',(6.19,1.07,0.5)); +#87209 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87210 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87211 = ADVANCED_FACE('',(#87212),#87246,.F.); +#87212 = FACE_BOUND('',#87213,.T.); +#87213 = EDGE_LOOP('',(#87214,#87215,#87224,#87232,#87240)); +#87214 = ORIENTED_EDGE('',*,*,#87151,.F.); +#87215 = ORIENTED_EDGE('',*,*,#87216,.T.); +#87216 = EDGE_CURVE('',#87152,#87217,#87219,.T.); +#87217 = VERTEX_POINT('',#87218); +#87218 = CARTESIAN_POINT('',(4.45,0.92,10.)); +#87219 = ELLIPSE('',#87220,0.212132034356,0.15); +#87220 = AXIS2_PLACEMENT_3D('',#87221,#87222,#87223); +#87221 = CARTESIAN_POINT('',(4.6,0.92,9.85)); +#87222 = DIRECTION('',(0.707106781187,-9.45232398609E-17,0.707106781187) + ); +#87223 = DIRECTION('',(-0.707106781187,1.161550727085E-15,0.707106781187 + )); +#87224 = ORIENTED_EDGE('',*,*,#87225,.T.); +#87225 = EDGE_CURVE('',#87217,#87226,#87228,.T.); +#87226 = VERTEX_POINT('',#87227); +#87227 = CARTESIAN_POINT('',(4.45,0.570000029651,10.)); +#87228 = LINE('',#87229,#87230); +#87229 = CARTESIAN_POINT('',(4.45,1.07,10.)); +#87230 = VECTOR('',#87231,1.); +#87231 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87232 = ORIENTED_EDGE('',*,*,#87233,.T.); +#87233 = EDGE_CURVE('',#87226,#87234,#87236,.T.); +#87234 = VERTEX_POINT('',#87235); +#87235 = CARTESIAN_POINT('',(4.69,0.570000029651,9.76)); +#87236 = LINE('',#87237,#87238); +#87237 = CARTESIAN_POINT('',(4.57,0.570000029651,9.88)); +#87238 = VECTOR('',#87239,1.); +#87239 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + -0.707106781187)); +#87240 = ORIENTED_EDGE('',*,*,#87241,.F.); +#87241 = EDGE_CURVE('',#87154,#87234,#87242,.T.); +#87242 = LINE('',#87243,#87244); +#87243 = CARTESIAN_POINT('',(4.69,1.07,9.76)); +#87244 = VECTOR('',#87245,1.); +#87245 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87246 = PLANE('',#87247); +#87247 = AXIS2_PLACEMENT_3D('',#87248,#87249,#87250); +#87248 = CARTESIAN_POINT('',(4.57,1.07,9.88)); +#87249 = DIRECTION('',(-0.707106781187,9.45232398609E-17,-0.707106781187 + )); +#87250 = DIRECTION('',(1.223491751166E-16,1.,1.132687265409E-17)); +#87251 = ADVANCED_FACE('',(#87252),#87271,.T.); +#87252 = FACE_BOUND('',#87253,.T.); +#87253 = EDGE_LOOP('',(#87254,#87255,#87264,#87270)); +#87254 = ORIENTED_EDGE('',*,*,#87161,.T.); +#87255 = ORIENTED_EDGE('',*,*,#87256,.T.); +#87256 = EDGE_CURVE('',#87162,#87257,#87259,.T.); +#87257 = VERTEX_POINT('',#87258); +#87258 = CARTESIAN_POINT('',(-0.96,0.92,10.)); +#87259 = ELLIPSE('',#87260,0.212132034356,0.15); +#87260 = AXIS2_PLACEMENT_3D('',#87261,#87262,#87263); +#87261 = CARTESIAN_POINT('',(-0.96,0.92,9.85)); +#87262 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#87263 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#87264 = ORIENTED_EDGE('',*,*,#87265,.F.); +#87265 = EDGE_CURVE('',#87217,#87257,#87266,.T.); +#87266 = LINE('',#87267,#87268); +#87267 = CARTESIAN_POINT('',(4.45,0.92,10.)); +#87268 = VECTOR('',#87269,1.); +#87269 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87270 = ORIENTED_EDGE('',*,*,#87216,.F.); +#87271 = CYLINDRICAL_SURFACE('',#87272,0.15); +#87272 = AXIS2_PLACEMENT_3D('',#87273,#87274,#87275); +#87273 = CARTESIAN_POINT('',(4.45,0.92,9.85)); +#87274 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87275 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87276 = ADVANCED_FACE('',(#87277),#87295,.T.); +#87277 = FACE_BOUND('',#87278,.T.); +#87278 = EDGE_LOOP('',(#87279,#87287,#87293,#87294)); +#87279 = ORIENTED_EDGE('',*,*,#87280,.T.); +#87280 = EDGE_CURVE('',#87234,#87281,#87283,.T.); +#87281 = VERTEX_POINT('',#87282); +#87282 = CARTESIAN_POINT('',(4.69,0.570000029651,9.75)); +#87283 = LINE('',#87284,#87285); +#87284 = CARTESIAN_POINT('',(4.69,0.570000029651,10.)); +#87285 = VECTOR('',#87286,1.); +#87286 = DIRECTION('',(-0.,0.,-1.)); +#87287 = ORIENTED_EDGE('',*,*,#87288,.T.); +#87288 = EDGE_CURVE('',#87281,#87194,#87289,.T.); +#87289 = LINE('',#87290,#87291); +#87290 = CARTESIAN_POINT('',(4.69,0.570000029651,9.75)); +#87291 = VECTOR('',#87292,1.); +#87292 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#87293 = ORIENTED_EDGE('',*,*,#87201,.F.); +#87294 = ORIENTED_EDGE('',*,*,#87241,.T.); +#87295 = PLANE('',#87296); +#87296 = AXIS2_PLACEMENT_3D('',#87297,#87298,#87299); +#87297 = CARTESIAN_POINT('',(4.69,0.570000029651,10.)); +#87298 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#87299 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#87300 = ADVANCED_FACE('',(#87301),#87394,.F.); +#87301 = FACE_BOUND('',#87302,.F.); +#87302 = EDGE_LOOP('',(#87303,#87304,#87312,#87320,#87328,#87337,#87345, + #87354,#87362,#87371,#87379,#87388)); +#87303 = ORIENTED_EDGE('',*,*,#87169,.T.); +#87304 = ORIENTED_EDGE('',*,*,#87305,.T.); +#87305 = EDGE_CURVE('',#87162,#87306,#87308,.T.); +#87306 = VERTEX_POINT('',#87307); +#87307 = CARTESIAN_POINT('',(-1.11,-11.23,9.85)); +#87308 = LINE('',#87309,#87310); +#87309 = CARTESIAN_POINT('',(-1.11,1.07,9.85)); +#87310 = VECTOR('',#87311,1.); +#87311 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87312 = ORIENTED_EDGE('',*,*,#87313,.F.); +#87313 = EDGE_CURVE('',#87314,#87306,#87316,.T.); +#87314 = VERTEX_POINT('',#87315); +#87315 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#87316 = LINE('',#87317,#87318); +#87317 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#87318 = VECTOR('',#87319,1.); +#87319 = DIRECTION('',(0.,0.,1.)); +#87320 = ORIENTED_EDGE('',*,*,#87321,.F.); +#87321 = EDGE_CURVE('',#87322,#87314,#87324,.T.); +#87322 = VERTEX_POINT('',#87323); +#87323 = CARTESIAN_POINT('',(-1.11,-9.949950493836,0.5)); +#87324 = LINE('',#87325,#87326); +#87325 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87326 = VECTOR('',#87327,1.); +#87327 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87328 = ORIENTED_EDGE('',*,*,#87329,.F.); +#87329 = EDGE_CURVE('',#87330,#87322,#87332,.T.); +#87330 = VERTEX_POINT('',#87331); +#87331 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#87332 = CIRCLE('',#87333,1.27); +#87333 = AXIS2_PLACEMENT_3D('',#87334,#87335,#87336); +#87334 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#87335 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87336 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87337 = ORIENTED_EDGE('',*,*,#87338,.T.); +#87338 = EDGE_CURVE('',#87330,#87339,#87341,.T.); +#87339 = VERTEX_POINT('',#87340); +#87340 = CARTESIAN_POINT('',(-1.11,-7.67,1.27)); +#87341 = LINE('',#87342,#87343); +#87342 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#87343 = VECTOR('',#87344,1.); +#87344 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87345 = ORIENTED_EDGE('',*,*,#87346,.F.); +#87346 = EDGE_CURVE('',#87347,#87339,#87349,.T.); +#87347 = VERTEX_POINT('',#87348); +#87348 = CARTESIAN_POINT('',(-1.11,-7.930049506164,0.5)); +#87349 = CIRCLE('',#87350,1.27); +#87350 = AXIS2_PLACEMENT_3D('',#87351,#87352,#87353); +#87351 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#87352 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87353 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87354 = ORIENTED_EDGE('',*,*,#87355,.F.); +#87355 = EDGE_CURVE('',#87356,#87347,#87358,.T.); +#87356 = VERTEX_POINT('',#87357); +#87357 = CARTESIAN_POINT('',(-1.11,-2.279950493836,0.5)); +#87358 = LINE('',#87359,#87360); +#87359 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87360 = VECTOR('',#87361,1.); +#87361 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87362 = ORIENTED_EDGE('',*,*,#87363,.F.); +#87363 = EDGE_CURVE('',#87364,#87356,#87366,.T.); +#87364 = VERTEX_POINT('',#87365); +#87365 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#87366 = CIRCLE('',#87367,1.27); +#87367 = AXIS2_PLACEMENT_3D('',#87368,#87369,#87370); +#87368 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#87369 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87370 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87371 = ORIENTED_EDGE('',*,*,#87372,.T.); +#87372 = EDGE_CURVE('',#87364,#87373,#87375,.T.); +#87373 = VERTEX_POINT('',#87374); +#87374 = CARTESIAN_POINT('',(-1.11,1.409983241274E-16,1.27)); +#87375 = LINE('',#87376,#87377); +#87376 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#87377 = VECTOR('',#87378,1.); +#87378 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87379 = ORIENTED_EDGE('',*,*,#87380,.F.); +#87380 = EDGE_CURVE('',#87381,#87373,#87383,.T.); +#87381 = VERTEX_POINT('',#87382); +#87382 = CARTESIAN_POINT('',(-1.11,-0.260049506164,0.5)); +#87383 = CIRCLE('',#87384,1.27); +#87384 = AXIS2_PLACEMENT_3D('',#87385,#87386,#87387); +#87385 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#87386 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87387 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87388 = ORIENTED_EDGE('',*,*,#87389,.F.); +#87389 = EDGE_CURVE('',#87170,#87381,#87390,.T.); +#87390 = LINE('',#87391,#87392); +#87391 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87392 = VECTOR('',#87393,1.); +#87393 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87394 = PLANE('',#87395); +#87395 = AXIS2_PLACEMENT_3D('',#87396,#87397,#87398); +#87396 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87397 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#87398 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87399 = ADVANCED_FACE('',(#87400),#87427,.F.); +#87400 = FACE_BOUND('',#87401,.F.); +#87401 = EDGE_LOOP('',(#87402,#87411,#87412,#87413,#87421)); +#87402 = ORIENTED_EDGE('',*,*,#87403,.F.); +#87403 = EDGE_CURVE('',#87281,#87404,#87406,.T.); +#87404 = VERTEX_POINT('',#87405); +#87405 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.75)); +#87406 = CIRCLE('',#87407,1.); +#87407 = AXIS2_PLACEMENT_3D('',#87408,#87409,#87410); +#87408 = CARTESIAN_POINT('',(5.69,0.57,9.75)); +#87409 = DIRECTION('',(0.,0.,1.)); +#87410 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87411 = ORIENTED_EDGE('',*,*,#87288,.T.); +#87412 = ORIENTED_EDGE('',*,*,#87193,.T.); +#87413 = ORIENTED_EDGE('',*,*,#87414,.T.); +#87414 = EDGE_CURVE('',#87186,#87415,#87417,.T.); +#87415 = VERTEX_POINT('',#87416); +#87416 = CARTESIAN_POINT('',(6.19,-0.429999999999,9.75)); +#87417 = LINE('',#87418,#87419); +#87418 = CARTESIAN_POINT('',(6.19,1.07,9.75)); +#87419 = VECTOR('',#87420,1.); +#87420 = DIRECTION('',(4.810966440044E-16,-1.,0.)); +#87421 = ORIENTED_EDGE('',*,*,#87422,.T.); +#87422 = EDGE_CURVE('',#87415,#87404,#87423,.T.); +#87423 = LINE('',#87424,#87425); +#87424 = CARTESIAN_POINT('',(6.19,-0.429999999999,9.75)); +#87425 = VECTOR('',#87426,1.); +#87426 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#87427 = PLANE('',#87428); +#87428 = AXIS2_PLACEMENT_3D('',#87429,#87430,#87431); +#87429 = CARTESIAN_POINT('',(4.69,0.570000029651,9.75)); +#87430 = DIRECTION('',(0.,0.,-1.)); +#87431 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#87432 = ADVANCED_FACE('',(#87433,#87561,#87595,#87629,#87663,#87697, + #87731),#87765,.T.); +#87433 = FACE_BOUND('',#87434,.T.); +#87434 = EDGE_LOOP('',(#87435,#87436,#87437,#87445,#87453,#87461,#87469, + #87477,#87485,#87493,#87501,#87509,#87515,#87516,#87524,#87532, + #87538,#87539,#87547,#87555)); +#87435 = ORIENTED_EDGE('',*,*,#87389,.F.); +#87436 = ORIENTED_EDGE('',*,*,#87177,.F.); +#87437 = ORIENTED_EDGE('',*,*,#87438,.F.); +#87438 = EDGE_CURVE('',#87439,#87178,#87441,.T.); +#87439 = VERTEX_POINT('',#87440); +#87440 = CARTESIAN_POINT('',(6.19,-0.260049506164,0.5)); +#87441 = LINE('',#87442,#87443); +#87442 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87443 = VECTOR('',#87444,1.); +#87444 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87445 = ORIENTED_EDGE('',*,*,#87446,.F.); +#87446 = EDGE_CURVE('',#87447,#87439,#87449,.T.); +#87447 = VERTEX_POINT('',#87448); +#87448 = CARTESIAN_POINT('',(5.89,-0.260049506164,0.5)); +#87449 = LINE('',#87450,#87451); +#87450 = CARTESIAN_POINT('',(6.19,-0.260049506164,0.5)); +#87451 = VECTOR('',#87452,1.); +#87452 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87453 = ORIENTED_EDGE('',*,*,#87454,.T.); +#87454 = EDGE_CURVE('',#87447,#87455,#87457,.T.); +#87455 = VERTEX_POINT('',#87456); +#87456 = CARTESIAN_POINT('',(5.89,-2.279950493836,0.5)); +#87457 = LINE('',#87458,#87459); +#87458 = CARTESIAN_POINT('',(5.89,-0.735,0.5)); +#87459 = VECTOR('',#87460,1.); +#87460 = DIRECTION('',(5.401060556461E-31,-1.,0.)); +#87461 = ORIENTED_EDGE('',*,*,#87462,.T.); +#87462 = EDGE_CURVE('',#87455,#87463,#87465,.T.); +#87463 = VERTEX_POINT('',#87464); +#87464 = CARTESIAN_POINT('',(6.19,-2.279950493836,0.5)); +#87465 = LINE('',#87466,#87467); +#87466 = CARTESIAN_POINT('',(6.19,-2.279950493836,0.5)); +#87467 = VECTOR('',#87468,1.); +#87468 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87469 = ORIENTED_EDGE('',*,*,#87470,.F.); +#87470 = EDGE_CURVE('',#87471,#87463,#87473,.T.); +#87471 = VERTEX_POINT('',#87472); +#87472 = CARTESIAN_POINT('',(6.19,-7.930049506164,0.5)); +#87473 = LINE('',#87474,#87475); +#87474 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87475 = VECTOR('',#87476,1.); +#87476 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87477 = ORIENTED_EDGE('',*,*,#87478,.F.); +#87478 = EDGE_CURVE('',#87479,#87471,#87481,.T.); +#87479 = VERTEX_POINT('',#87480); +#87480 = CARTESIAN_POINT('',(5.89,-7.930049506164,0.5)); +#87481 = LINE('',#87482,#87483); +#87482 = CARTESIAN_POINT('',(6.19,-7.930049506164,0.5)); +#87483 = VECTOR('',#87484,1.); +#87484 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87485 = ORIENTED_EDGE('',*,*,#87486,.T.); +#87486 = EDGE_CURVE('',#87479,#87487,#87489,.T.); +#87487 = VERTEX_POINT('',#87488); +#87488 = CARTESIAN_POINT('',(5.89,-9.949950493836,0.5)); +#87489 = LINE('',#87490,#87491); +#87490 = CARTESIAN_POINT('',(5.89,-4.57,0.5)); +#87491 = VECTOR('',#87492,1.); +#87492 = DIRECTION('',(5.401060556461E-31,-1.,0.)); +#87493 = ORIENTED_EDGE('',*,*,#87494,.T.); +#87494 = EDGE_CURVE('',#87487,#87495,#87497,.T.); +#87495 = VERTEX_POINT('',#87496); +#87496 = CARTESIAN_POINT('',(6.19,-9.949950493836,0.5)); +#87497 = LINE('',#87498,#87499); +#87498 = CARTESIAN_POINT('',(6.19,-9.949950493836,0.5)); +#87499 = VECTOR('',#87500,1.); +#87500 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#87501 = ORIENTED_EDGE('',*,*,#87502,.F.); +#87502 = EDGE_CURVE('',#87503,#87495,#87505,.T.); +#87503 = VERTEX_POINT('',#87504); +#87504 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87505 = LINE('',#87506,#87507); +#87506 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87507 = VECTOR('',#87508,1.); +#87508 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87509 = ORIENTED_EDGE('',*,*,#87510,.F.); +#87510 = EDGE_CURVE('',#87314,#87503,#87511,.T.); +#87511 = LINE('',#87512,#87513); +#87512 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#87513 = VECTOR('',#87514,1.); +#87514 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#87515 = ORIENTED_EDGE('',*,*,#87321,.F.); +#87516 = ORIENTED_EDGE('',*,*,#87517,.F.); +#87517 = EDGE_CURVE('',#87518,#87322,#87520,.T.); +#87518 = VERTEX_POINT('',#87519); +#87519 = CARTESIAN_POINT('',(-0.81,-9.949950493836,0.5)); +#87520 = LINE('',#87521,#87522); +#87521 = CARTESIAN_POINT('',(-1.11,-9.949950493836,0.5)); +#87522 = VECTOR('',#87523,1.); +#87523 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87524 = ORIENTED_EDGE('',*,*,#87525,.F.); +#87525 = EDGE_CURVE('',#87526,#87518,#87528,.T.); +#87526 = VERTEX_POINT('',#87527); +#87527 = CARTESIAN_POINT('',(-0.81,-7.930049506164,0.5)); +#87528 = LINE('',#87529,#87530); +#87529 = CARTESIAN_POINT('',(-0.81,-4.57,0.5)); +#87530 = VECTOR('',#87531,1.); +#87531 = DIRECTION('',(-3.49676543189E-16,-1.,0.)); +#87532 = ORIENTED_EDGE('',*,*,#87533,.T.); +#87533 = EDGE_CURVE('',#87526,#87347,#87534,.T.); +#87534 = LINE('',#87535,#87536); +#87535 = CARTESIAN_POINT('',(-1.11,-7.930049506164,0.5)); +#87536 = VECTOR('',#87537,1.); +#87537 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87538 = ORIENTED_EDGE('',*,*,#87355,.F.); +#87539 = ORIENTED_EDGE('',*,*,#87540,.F.); +#87540 = EDGE_CURVE('',#87541,#87356,#87543,.T.); +#87541 = VERTEX_POINT('',#87542); +#87542 = CARTESIAN_POINT('',(-0.81,-2.279950493836,0.5)); +#87543 = LINE('',#87544,#87545); +#87544 = CARTESIAN_POINT('',(-1.11,-2.279950493836,0.5)); +#87545 = VECTOR('',#87546,1.); +#87546 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87547 = ORIENTED_EDGE('',*,*,#87548,.F.); +#87548 = EDGE_CURVE('',#87549,#87541,#87551,.T.); +#87549 = VERTEX_POINT('',#87550); +#87550 = CARTESIAN_POINT('',(-0.81,-0.260049506164,0.5)); +#87551 = LINE('',#87552,#87553); +#87552 = CARTESIAN_POINT('',(-0.81,-0.735,0.5)); +#87553 = VECTOR('',#87554,1.); +#87554 = DIRECTION('',(-1.748382715945E-16,-1.,0.)); +#87555 = ORIENTED_EDGE('',*,*,#87556,.T.); +#87556 = EDGE_CURVE('',#87549,#87381,#87557,.T.); +#87557 = LINE('',#87558,#87559); +#87558 = CARTESIAN_POINT('',(-1.11,-0.260049506164,0.5)); +#87559 = VECTOR('',#87560,1.); +#87560 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#87561 = FACE_BOUND('',#87562,.T.); +#87562 = EDGE_LOOP('',(#87563,#87573,#87581,#87589)); +#87563 = ORIENTED_EDGE('',*,*,#87564,.T.); +#87564 = EDGE_CURVE('',#87565,#87567,#87569,.T.); +#87565 = VERTEX_POINT('',#87566); +#87566 = CARTESIAN_POINT('',(4.93,-2.49,0.5)); +#87567 = VERTEX_POINT('',#87568); +#87568 = CARTESIAN_POINT('',(4.93,-2.79,0.5)); +#87569 = LINE('',#87570,#87571); +#87570 = CARTESIAN_POINT('',(4.93,-0.86,0.5)); +#87571 = VECTOR('',#87572,1.); +#87572 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87573 = ORIENTED_EDGE('',*,*,#87574,.T.); +#87574 = EDGE_CURVE('',#87567,#87575,#87577,.T.); +#87575 = VERTEX_POINT('',#87576); +#87576 = CARTESIAN_POINT('',(5.23,-2.79,0.5)); +#87577 = LINE('',#87578,#87579); +#87578 = CARTESIAN_POINT('',(2.06,-2.79,0.5)); +#87579 = VECTOR('',#87580,1.); +#87580 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87581 = ORIENTED_EDGE('',*,*,#87582,.T.); +#87582 = EDGE_CURVE('',#87575,#87583,#87585,.T.); +#87583 = VERTEX_POINT('',#87584); +#87584 = CARTESIAN_POINT('',(5.23,-2.49,0.5)); +#87585 = LINE('',#87586,#87587); +#87586 = CARTESIAN_POINT('',(5.23,-0.71,0.5)); +#87587 = VECTOR('',#87588,1.); +#87588 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87589 = ORIENTED_EDGE('',*,*,#87590,.T.); +#87590 = EDGE_CURVE('',#87583,#87565,#87591,.T.); +#87591 = LINE('',#87592,#87593); +#87592 = CARTESIAN_POINT('',(1.91,-2.49,0.5)); +#87593 = VECTOR('',#87594,1.); +#87594 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87595 = FACE_BOUND('',#87596,.T.); +#87596 = EDGE_LOOP('',(#87597,#87607,#87615,#87623)); +#87597 = ORIENTED_EDGE('',*,*,#87598,.F.); +#87598 = EDGE_CURVE('',#87599,#87601,#87603,.T.); +#87599 = VERTEX_POINT('',#87600); +#87600 = CARTESIAN_POINT('',(-0.15,-2.49,0.5)); +#87601 = VERTEX_POINT('',#87602); +#87602 = CARTESIAN_POINT('',(0.15,-2.49,0.5)); +#87603 = LINE('',#87604,#87605); +#87604 = CARTESIAN_POINT('',(-0.48,-2.49,0.5)); +#87605 = VECTOR('',#87606,1.); +#87606 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87607 = ORIENTED_EDGE('',*,*,#87608,.F.); +#87608 = EDGE_CURVE('',#87609,#87599,#87611,.T.); +#87609 = VERTEX_POINT('',#87610); +#87610 = CARTESIAN_POINT('',(-0.15,-2.79,0.5)); +#87611 = LINE('',#87612,#87613); +#87612 = CARTESIAN_POINT('',(-0.15,-0.71,0.5)); +#87613 = VECTOR('',#87614,1.); +#87614 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87615 = ORIENTED_EDGE('',*,*,#87616,.F.); +#87616 = EDGE_CURVE('',#87617,#87609,#87619,.T.); +#87617 = VERTEX_POINT('',#87618); +#87618 = CARTESIAN_POINT('',(0.15,-2.79,0.5)); +#87619 = LINE('',#87620,#87621); +#87620 = CARTESIAN_POINT('',(-0.63,-2.79,0.5)); +#87621 = VECTOR('',#87622,1.); +#87622 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87623 = ORIENTED_EDGE('',*,*,#87624,.F.); +#87624 = EDGE_CURVE('',#87601,#87617,#87625,.T.); +#87625 = LINE('',#87626,#87627); +#87626 = CARTESIAN_POINT('',(0.15,-0.86,0.5)); +#87627 = VECTOR('',#87628,1.); +#87628 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87629 = FACE_BOUND('',#87630,.T.); +#87630 = EDGE_LOOP('',(#87631,#87641,#87649,#87657)); +#87631 = ORIENTED_EDGE('',*,*,#87632,.F.); +#87632 = EDGE_CURVE('',#87633,#87635,#87637,.T.); +#87633 = VERTEX_POINT('',#87634); +#87634 = CARTESIAN_POINT('',(0.15,-10.41,0.5)); +#87635 = VERTEX_POINT('',#87636); +#87636 = CARTESIAN_POINT('',(-0.15,-10.41,0.5)); +#87637 = LINE('',#87638,#87639); +#87638 = CARTESIAN_POINT('',(-0.63,-10.41,0.5)); +#87639 = VECTOR('',#87640,1.); +#87640 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87641 = ORIENTED_EDGE('',*,*,#87642,.F.); +#87642 = EDGE_CURVE('',#87643,#87633,#87645,.T.); +#87643 = VERTEX_POINT('',#87644); +#87644 = CARTESIAN_POINT('',(0.15,-10.11,0.5)); +#87645 = LINE('',#87646,#87647); +#87646 = CARTESIAN_POINT('',(0.15,-4.67,0.5)); +#87647 = VECTOR('',#87648,1.); +#87648 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87649 = ORIENTED_EDGE('',*,*,#87650,.F.); +#87650 = EDGE_CURVE('',#87651,#87643,#87653,.T.); +#87651 = VERTEX_POINT('',#87652); +#87652 = CARTESIAN_POINT('',(-0.15,-10.11,0.5)); +#87653 = LINE('',#87654,#87655); +#87654 = CARTESIAN_POINT('',(-0.48,-10.11,0.5)); +#87655 = VECTOR('',#87656,1.); +#87656 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87657 = ORIENTED_EDGE('',*,*,#87658,.F.); +#87658 = EDGE_CURVE('',#87635,#87651,#87659,.T.); +#87659 = LINE('',#87660,#87661); +#87660 = CARTESIAN_POINT('',(-0.15,-4.52,0.5)); +#87661 = VECTOR('',#87662,1.); +#87662 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87663 = FACE_BOUND('',#87664,.T.); +#87664 = EDGE_LOOP('',(#87665,#87675,#87683,#87691)); +#87665 = ORIENTED_EDGE('',*,*,#87666,.T.); +#87666 = EDGE_CURVE('',#87667,#87669,#87671,.T.); +#87667 = VERTEX_POINT('',#87668); +#87668 = CARTESIAN_POINT('',(5.23,-10.41,0.5)); +#87669 = VERTEX_POINT('',#87670); +#87670 = CARTESIAN_POINT('',(5.23,-10.11,0.5)); +#87671 = LINE('',#87672,#87673); +#87672 = CARTESIAN_POINT('',(5.23,-4.52,0.5)); +#87673 = VECTOR('',#87674,1.); +#87674 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87675 = ORIENTED_EDGE('',*,*,#87676,.T.); +#87676 = EDGE_CURVE('',#87669,#87677,#87679,.T.); +#87677 = VERTEX_POINT('',#87678); +#87678 = CARTESIAN_POINT('',(4.93,-10.11,0.5)); +#87679 = LINE('',#87680,#87681); +#87680 = CARTESIAN_POINT('',(1.91,-10.11,0.5)); +#87681 = VECTOR('',#87682,1.); +#87682 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87683 = ORIENTED_EDGE('',*,*,#87684,.T.); +#87684 = EDGE_CURVE('',#87677,#87685,#87687,.T.); +#87685 = VERTEX_POINT('',#87686); +#87686 = CARTESIAN_POINT('',(4.93,-10.41,0.5)); +#87687 = LINE('',#87688,#87689); +#87688 = CARTESIAN_POINT('',(4.93,-4.67,0.5)); +#87689 = VECTOR('',#87690,1.); +#87690 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87691 = ORIENTED_EDGE('',*,*,#87692,.T.); +#87692 = EDGE_CURVE('',#87685,#87667,#87693,.T.); +#87693 = LINE('',#87694,#87695); +#87694 = CARTESIAN_POINT('',(2.06,-10.41,0.5)); +#87695 = VECTOR('',#87696,1.); +#87696 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87697 = FACE_BOUND('',#87698,.T.); +#87698 = EDGE_LOOP('',(#87699,#87709,#87717,#87725)); +#87699 = ORIENTED_EDGE('',*,*,#87700,.F.); +#87700 = EDGE_CURVE('',#87701,#87703,#87705,.T.); +#87701 = VERTEX_POINT('',#87702); +#87702 = CARTESIAN_POINT('',(0.25,0.25,0.5)); +#87703 = VERTEX_POINT('',#87704); +#87704 = CARTESIAN_POINT('',(0.25,-0.25,0.5)); +#87705 = LINE('',#87706,#87707); +#87706 = CARTESIAN_POINT('',(0.25,0.41,0.5)); +#87707 = VECTOR('',#87708,1.); +#87708 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87709 = ORIENTED_EDGE('',*,*,#87710,.F.); +#87710 = EDGE_CURVE('',#87711,#87701,#87713,.T.); +#87711 = VERTEX_POINT('',#87712); +#87712 = CARTESIAN_POINT('',(-0.25,0.25,0.5)); +#87713 = LINE('',#87714,#87715); +#87714 = CARTESIAN_POINT('',(-0.43,0.25,0.5)); +#87715 = VECTOR('',#87716,1.); +#87716 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87717 = ORIENTED_EDGE('',*,*,#87718,.F.); +#87718 = EDGE_CURVE('',#87719,#87711,#87721,.T.); +#87719 = VERTEX_POINT('',#87720); +#87720 = CARTESIAN_POINT('',(-0.25,-0.25,0.5)); +#87721 = LINE('',#87722,#87723); +#87722 = CARTESIAN_POINT('',(-0.25,0.66,0.5)); +#87723 = VECTOR('',#87724,1.); +#87724 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87725 = ORIENTED_EDGE('',*,*,#87726,.F.); +#87726 = EDGE_CURVE('',#87703,#87719,#87727,.T.); +#87727 = LINE('',#87728,#87729); +#87728 = CARTESIAN_POINT('',(-0.68,-0.25,0.5)); +#87729 = VECTOR('',#87730,1.); +#87730 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87731 = FACE_BOUND('',#87732,.T.); +#87732 = EDGE_LOOP('',(#87733,#87743,#87751,#87759)); +#87733 = ORIENTED_EDGE('',*,*,#87734,.F.); +#87734 = EDGE_CURVE('',#87735,#87737,#87739,.T.); +#87735 = VERTEX_POINT('',#87736); +#87736 = CARTESIAN_POINT('',(5.33,0.25,0.5)); +#87737 = VERTEX_POINT('',#87738); +#87738 = CARTESIAN_POINT('',(5.33,-0.25,0.5)); +#87739 = LINE('',#87740,#87741); +#87740 = CARTESIAN_POINT('',(5.33,0.41,0.5)); +#87741 = VECTOR('',#87742,1.); +#87742 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#87743 = ORIENTED_EDGE('',*,*,#87744,.F.); +#87744 = EDGE_CURVE('',#87745,#87735,#87747,.T.); +#87745 = VERTEX_POINT('',#87746); +#87746 = CARTESIAN_POINT('',(4.83,0.25,0.5)); +#87747 = LINE('',#87748,#87749); +#87748 = CARTESIAN_POINT('',(2.11,0.25,0.5)); +#87749 = VECTOR('',#87750,1.); +#87750 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#87751 = ORIENTED_EDGE('',*,*,#87752,.F.); +#87752 = EDGE_CURVE('',#87753,#87745,#87755,.T.); +#87753 = VERTEX_POINT('',#87754); +#87754 = CARTESIAN_POINT('',(4.83,-0.25,0.5)); +#87755 = LINE('',#87756,#87757); +#87756 = CARTESIAN_POINT('',(4.83,0.66,0.5)); +#87757 = VECTOR('',#87758,1.); +#87758 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#87759 = ORIENTED_EDGE('',*,*,#87760,.F.); +#87760 = EDGE_CURVE('',#87737,#87753,#87761,.T.); +#87761 = LINE('',#87762,#87763); +#87762 = CARTESIAN_POINT('',(1.86,-0.25,0.5)); +#87763 = VECTOR('',#87764,1.); +#87764 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#87765 = PLANE('',#87766); +#87766 = AXIS2_PLACEMENT_3D('',#87767,#87768,#87769); +#87767 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87768 = DIRECTION('',(0.,-0.,-1.)); +#87769 = DIRECTION('',(-1.,6.661338147751E-16,-0.)); +#87770 = ADVANCED_FACE('',(#87771),#87856,.F.); +#87771 = FACE_BOUND('',#87772,.F.); +#87772 = EDGE_LOOP('',(#87773,#87783,#87791,#87797,#87798,#87799,#87800, + #87809,#87817,#87824,#87825,#87834,#87842,#87849,#87850)); +#87773 = ORIENTED_EDGE('',*,*,#87774,.T.); +#87774 = EDGE_CURVE('',#87775,#87777,#87779,.T.); +#87775 = VERTEX_POINT('',#87776); +#87776 = CARTESIAN_POINT('',(6.19,-11.23,9.85)); +#87777 = VERTEX_POINT('',#87778); +#87778 = CARTESIAN_POINT('',(6.19,-0.519999999999,9.85)); +#87779 = LINE('',#87780,#87781); +#87780 = CARTESIAN_POINT('',(6.19,-11.23,9.85)); +#87781 = VECTOR('',#87782,1.); +#87782 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87783 = ORIENTED_EDGE('',*,*,#87784,.T.); +#87784 = EDGE_CURVE('',#87777,#87785,#87787,.T.); +#87785 = VERTEX_POINT('',#87786); +#87786 = CARTESIAN_POINT('',(6.19,-0.429999999999,9.76)); +#87787 = LINE('',#87788,#87789); +#87788 = CARTESIAN_POINT('',(6.19,-0.875,10.205)); +#87789 = VECTOR('',#87790,1.); +#87790 = DIRECTION('',(6.280369834731E-16,0.707106781187,-0.707106781187 + )); +#87791 = ORIENTED_EDGE('',*,*,#87792,.T.); +#87792 = EDGE_CURVE('',#87785,#87415,#87793,.T.); +#87793 = LINE('',#87794,#87795); +#87794 = CARTESIAN_POINT('',(6.19,-0.429999999999,10.)); +#87795 = VECTOR('',#87796,1.); +#87796 = DIRECTION('',(-0.,0.,-1.)); +#87797 = ORIENTED_EDGE('',*,*,#87414,.F.); +#87798 = ORIENTED_EDGE('',*,*,#87185,.F.); +#87799 = ORIENTED_EDGE('',*,*,#87438,.F.); +#87800 = ORIENTED_EDGE('',*,*,#87801,.T.); +#87801 = EDGE_CURVE('',#87439,#87802,#87804,.T.); +#87802 = VERTEX_POINT('',#87803); +#87803 = CARTESIAN_POINT('',(6.19,1.409983241274E-16,1.27)); +#87804 = CIRCLE('',#87805,1.27); +#87805 = AXIS2_PLACEMENT_3D('',#87806,#87807,#87808); +#87806 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#87807 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87808 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87809 = ORIENTED_EDGE('',*,*,#87810,.F.); +#87810 = EDGE_CURVE('',#87811,#87802,#87813,.T.); +#87811 = VERTEX_POINT('',#87812); +#87812 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#87813 = LINE('',#87814,#87815); +#87814 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#87815 = VECTOR('',#87816,1.); +#87816 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87817 = ORIENTED_EDGE('',*,*,#87818,.T.); +#87818 = EDGE_CURVE('',#87811,#87463,#87819,.T.); +#87819 = CIRCLE('',#87820,1.27); +#87820 = AXIS2_PLACEMENT_3D('',#87821,#87822,#87823); +#87821 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#87822 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87823 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87824 = ORIENTED_EDGE('',*,*,#87470,.F.); +#87825 = ORIENTED_EDGE('',*,*,#87826,.T.); +#87826 = EDGE_CURVE('',#87471,#87827,#87829,.T.); +#87827 = VERTEX_POINT('',#87828); +#87828 = CARTESIAN_POINT('',(6.19,-7.67,1.27)); +#87829 = CIRCLE('',#87830,1.27); +#87830 = AXIS2_PLACEMENT_3D('',#87831,#87832,#87833); +#87831 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#87832 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87833 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87834 = ORIENTED_EDGE('',*,*,#87835,.F.); +#87835 = EDGE_CURVE('',#87836,#87827,#87838,.T.); +#87836 = VERTEX_POINT('',#87837); +#87837 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#87838 = LINE('',#87839,#87840); +#87839 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#87840 = VECTOR('',#87841,1.); +#87841 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87842 = ORIENTED_EDGE('',*,*,#87843,.T.); +#87843 = EDGE_CURVE('',#87836,#87495,#87844,.T.); +#87844 = CIRCLE('',#87845,1.27); +#87845 = AXIS2_PLACEMENT_3D('',#87846,#87847,#87848); +#87846 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#87847 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#87848 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#87849 = ORIENTED_EDGE('',*,*,#87502,.F.); +#87850 = ORIENTED_EDGE('',*,*,#87851,.T.); +#87851 = EDGE_CURVE('',#87503,#87775,#87852,.T.); +#87852 = LINE('',#87853,#87854); +#87853 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87854 = VECTOR('',#87855,1.); +#87855 = DIRECTION('',(0.,0.,1.)); +#87856 = PLANE('',#87857); +#87857 = AXIS2_PLACEMENT_3D('',#87858,#87859,#87860); +#87858 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#87859 = DIRECTION('',(-1.,8.881784197001E-16,0.)); +#87860 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87861 = ADVANCED_FACE('',(#87862),#87905,.F.); +#87862 = FACE_BOUND('',#87863,.F.); +#87863 = EDGE_LOOP('',(#87864,#87874,#87882,#87890,#87896,#87897,#87898) + ); +#87864 = ORIENTED_EDGE('',*,*,#87865,.T.); +#87865 = EDGE_CURVE('',#87866,#87868,#87870,.T.); +#87866 = VERTEX_POINT('',#87867); +#87867 = CARTESIAN_POINT('',(5.690001254811,-0.669999999999,10.)); +#87868 = VERTEX_POINT('',#87869); +#87869 = CARTESIAN_POINT('',(6.04,-0.669999999999,10.)); +#87870 = LINE('',#87871,#87872); +#87871 = CARTESIAN_POINT('',(5.690001011944,-0.669999999999,10.)); +#87872 = VECTOR('',#87873,1.); +#87873 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#87874 = ORIENTED_EDGE('',*,*,#87875,.F.); +#87875 = EDGE_CURVE('',#87876,#87868,#87878,.T.); +#87876 = VERTEX_POINT('',#87877); +#87877 = CARTESIAN_POINT('',(6.04,-11.08,10.)); +#87878 = LINE('',#87879,#87880); +#87879 = CARTESIAN_POINT('',(6.04,-11.23,10.)); +#87880 = VECTOR('',#87881,1.); +#87881 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#87882 = ORIENTED_EDGE('',*,*,#87883,.F.); +#87883 = EDGE_CURVE('',#87884,#87876,#87886,.T.); +#87884 = VERTEX_POINT('',#87885); +#87885 = CARTESIAN_POINT('',(-0.96,-11.08,10.)); +#87886 = LINE('',#87887,#87888); +#87887 = CARTESIAN_POINT('',(-1.11,-11.08,10.)); +#87888 = VECTOR('',#87889,1.); +#87889 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#87890 = ORIENTED_EDGE('',*,*,#87891,.F.); +#87891 = EDGE_CURVE('',#87257,#87884,#87892,.T.); +#87892 = LINE('',#87893,#87894); +#87893 = CARTESIAN_POINT('',(-0.96,1.07,10.)); +#87894 = VECTOR('',#87895,1.); +#87895 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87896 = ORIENTED_EDGE('',*,*,#87265,.F.); +#87897 = ORIENTED_EDGE('',*,*,#87225,.T.); +#87898 = ORIENTED_EDGE('',*,*,#87899,.T.); +#87899 = EDGE_CURVE('',#87226,#87866,#87900,.T.); +#87900 = CIRCLE('',#87901,1.24); +#87901 = AXIS2_PLACEMENT_3D('',#87902,#87903,#87904); +#87902 = CARTESIAN_POINT('',(5.69,0.57,10.)); +#87903 = DIRECTION('',(0.,0.,1.)); +#87904 = DIRECTION('',(-1.,2.965081991047E-08,0.)); +#87905 = PLANE('',#87906); +#87906 = AXIS2_PLACEMENT_3D('',#87907,#87908,#87909); +#87907 = CARTESIAN_POINT('',(-1.11,1.07,10.)); +#87908 = DIRECTION('',(0.,-0.,-1.)); +#87909 = DIRECTION('',(-1.,6.661338147751E-16,-0.)); +#87910 = ADVANCED_FACE('',(#87911),#87930,.F.); +#87911 = FACE_BOUND('',#87912,.F.); +#87912 = EDGE_LOOP('',(#87913,#87922,#87928,#87929)); +#87913 = ORIENTED_EDGE('',*,*,#87914,.T.); +#87914 = EDGE_CURVE('',#87234,#87915,#87917,.T.); +#87915 = VERTEX_POINT('',#87916); +#87916 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.76)); +#87917 = CIRCLE('',#87918,1.); +#87918 = AXIS2_PLACEMENT_3D('',#87919,#87920,#87921); +#87919 = CARTESIAN_POINT('',(5.69,0.57,9.76)); +#87920 = DIRECTION('',(0.,0.,1.)); +#87921 = DIRECTION('',(-1.,2.965081991047E-08,0.)); +#87922 = ORIENTED_EDGE('',*,*,#87923,.F.); +#87923 = EDGE_CURVE('',#87866,#87915,#87924,.T.); +#87924 = LINE('',#87925,#87926); +#87925 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.76)); +#87926 = VECTOR('',#87927,1.); +#87927 = DIRECTION('',(-7.155524873322E-07,0.707106781186, + -0.707106781187)); +#87928 = ORIENTED_EDGE('',*,*,#87899,.F.); +#87929 = ORIENTED_EDGE('',*,*,#87233,.T.); +#87930 = CONICAL_SURFACE('',#87931,1.,0.785398163397); +#87931 = AXIS2_PLACEMENT_3D('',#87932,#87933,#87934); +#87932 = CARTESIAN_POINT('',(5.69,0.57,9.76)); +#87933 = DIRECTION('',(0.,0.,1.)); +#87934 = DIRECTION('',(-1.,2.965081991047E-08,0.)); +#87935 = ADVANCED_FACE('',(#87936),#87948,.T.); +#87936 = FACE_BOUND('',#87937,.T.); +#87937 = EDGE_LOOP('',(#87938,#87939,#87940,#87947)); +#87938 = ORIENTED_EDGE('',*,*,#87256,.F.); +#87939 = ORIENTED_EDGE('',*,*,#87305,.T.); +#87940 = ORIENTED_EDGE('',*,*,#87941,.F.); +#87941 = EDGE_CURVE('',#87884,#87306,#87942,.T.); +#87942 = ELLIPSE('',#87943,0.212132034356,0.15); +#87943 = AXIS2_PLACEMENT_3D('',#87944,#87945,#87946); +#87944 = CARTESIAN_POINT('',(-0.96,-11.08,9.85)); +#87945 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#87946 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#87947 = ORIENTED_EDGE('',*,*,#87891,.F.); +#87948 = CYLINDRICAL_SURFACE('',#87949,0.15); +#87949 = AXIS2_PLACEMENT_3D('',#87950,#87951,#87952); +#87950 = CARTESIAN_POINT('',(-0.96,1.07,9.85)); +#87951 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87952 = DIRECTION('',(0.,0.,1.)); +#87953 = ADVANCED_FACE('',(#87954),#87965,.F.); +#87954 = FACE_BOUND('',#87955,.F.); +#87955 = EDGE_LOOP('',(#87956,#87957,#87958,#87964)); +#87956 = ORIENTED_EDGE('',*,*,#87280,.T.); +#87957 = ORIENTED_EDGE('',*,*,#87403,.T.); +#87958 = ORIENTED_EDGE('',*,*,#87959,.F.); +#87959 = EDGE_CURVE('',#87915,#87404,#87960,.T.); +#87960 = LINE('',#87961,#87962); +#87961 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,10.)); +#87962 = VECTOR('',#87963,1.); +#87963 = DIRECTION('',(-0.,0.,-1.)); +#87964 = ORIENTED_EDGE('',*,*,#87914,.F.); +#87965 = CYLINDRICAL_SURFACE('',#87966,1.); +#87966 = AXIS2_PLACEMENT_3D('',#87967,#87968,#87969); +#87967 = CARTESIAN_POINT('',(5.69,0.57,10.)); +#87968 = DIRECTION('',(0.,0.,1.)); +#87969 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#87970 = ADVANCED_FACE('',(#87971),#87982,.T.); +#87971 = FACE_BOUND('',#87972,.T.); +#87972 = EDGE_LOOP('',(#87973,#87974,#87975,#87976)); +#87973 = ORIENTED_EDGE('',*,*,#87363,.F.); +#87974 = ORIENTED_EDGE('',*,*,#87372,.T.); +#87975 = ORIENTED_EDGE('',*,*,#87380,.F.); +#87976 = ORIENTED_EDGE('',*,*,#87977,.T.); +#87977 = EDGE_CURVE('',#87381,#87356,#87978,.T.); +#87978 = LINE('',#87979,#87980); +#87979 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87980 = VECTOR('',#87981,1.); +#87981 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87982 = PLANE('',#87983); +#87983 = AXIS2_PLACEMENT_3D('',#87984,#87985,#87986); +#87984 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#87985 = DIRECTION('',(-1.,1.748382715945E-16,-1.009429231697E-16)); +#87986 = DIRECTION('',(-1.748382715945E-16,-1.,-1.110223024625E-16)); +#87987 = ADVANCED_FACE('',(#87988),#87999,.T.); +#87988 = FACE_BOUND('',#87989,.T.); +#87989 = EDGE_LOOP('',(#87990,#87991,#87992,#87993)); +#87990 = ORIENTED_EDGE('',*,*,#87329,.F.); +#87991 = ORIENTED_EDGE('',*,*,#87338,.T.); +#87992 = ORIENTED_EDGE('',*,*,#87346,.F.); +#87993 = ORIENTED_EDGE('',*,*,#87994,.T.); +#87994 = EDGE_CURVE('',#87347,#87322,#87995,.T.); +#87995 = LINE('',#87996,#87997); +#87996 = CARTESIAN_POINT('',(-1.11,1.07,0.5)); +#87997 = VECTOR('',#87998,1.); +#87998 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#87999 = PLANE('',#88000); +#88000 = AXIS2_PLACEMENT_3D('',#88001,#88002,#88003); +#88001 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#88002 = DIRECTION('',(-1.,3.49676543189E-16,8.444548485231E-29)); +#88003 = DIRECTION('',(-3.49676543189E-16,-1.,-1.110223024625E-16)); +#88004 = ADVANCED_FACE('',(#88005),#88016,.F.); +#88005 = FACE_BOUND('',#88006,.F.); +#88006 = EDGE_LOOP('',(#88007,#88008,#88014,#88015)); +#88007 = ORIENTED_EDGE('',*,*,#87313,.T.); +#88008 = ORIENTED_EDGE('',*,*,#88009,.T.); +#88009 = EDGE_CURVE('',#87306,#87775,#88010,.T.); +#88010 = LINE('',#88011,#88012); +#88011 = CARTESIAN_POINT('',(-1.11,-11.23,9.85)); +#88012 = VECTOR('',#88013,1.); +#88013 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#88014 = ORIENTED_EDGE('',*,*,#87851,.F.); +#88015 = ORIENTED_EDGE('',*,*,#87510,.F.); +#88016 = PLANE('',#88017); +#88017 = AXIS2_PLACEMENT_3D('',#88018,#88019,#88020); +#88018 = CARTESIAN_POINT('',(-1.11,-11.23,0.5)); +#88019 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88020 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#88021 = ADVANCED_FACE('',(#88022),#88033,.T.); +#88022 = FACE_BOUND('',#88023,.T.); +#88023 = EDGE_LOOP('',(#88024,#88025,#88026,#88027)); +#88024 = ORIENTED_EDGE('',*,*,#87792,.T.); +#88025 = ORIENTED_EDGE('',*,*,#87422,.T.); +#88026 = ORIENTED_EDGE('',*,*,#87959,.F.); +#88027 = ORIENTED_EDGE('',*,*,#88028,.T.); +#88028 = EDGE_CURVE('',#87915,#87785,#88029,.T.); +#88029 = LINE('',#88030,#88031); +#88030 = CARTESIAN_POINT('',(5.690001011944,-0.429999999999,9.76)); +#88031 = VECTOR('',#88032,1.); +#88032 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#88033 = PLANE('',#88034); +#88034 = AXIS2_PLACEMENT_3D('',#88035,#88036,#88037); +#88035 = CARTESIAN_POINT('',(6.19,-0.429999999999,10.)); +#88036 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#88037 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#88038 = ADVANCED_FACE('',(#88039),#88057,.T.); +#88039 = FACE_BOUND('',#88040,.T.); +#88040 = EDGE_LOOP('',(#88041,#88042,#88049,#88050)); +#88041 = ORIENTED_EDGE('',*,*,#87556,.F.); +#88042 = ORIENTED_EDGE('',*,*,#88043,.F.); +#88043 = EDGE_CURVE('',#87541,#87549,#88044,.T.); +#88044 = CIRCLE('',#88045,1.27); +#88045 = AXIS2_PLACEMENT_3D('',#88046,#88047,#88048); +#88046 = CARTESIAN_POINT('',(-0.81,-1.27,1.27)); +#88047 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88048 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88049 = ORIENTED_EDGE('',*,*,#87540,.T.); +#88050 = ORIENTED_EDGE('',*,*,#88051,.T.); +#88051 = EDGE_CURVE('',#87356,#87381,#88052,.T.); +#88052 = CIRCLE('',#88053,1.27); +#88053 = AXIS2_PLACEMENT_3D('',#88054,#88055,#88056); +#88054 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#88055 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88056 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88057 = CYLINDRICAL_SURFACE('',#88058,1.27); +#88058 = AXIS2_PLACEMENT_3D('',#88059,#88060,#88061); +#88059 = CARTESIAN_POINT('',(-1.11,-1.27,1.27)); +#88060 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#88061 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88062 = ADVANCED_FACE('',(#88063),#88067,.F.); +#88063 = FACE_BOUND('',#88064,.F.); +#88064 = EDGE_LOOP('',(#88065,#88066)); +#88065 = ORIENTED_EDGE('',*,*,#88043,.F.); +#88066 = ORIENTED_EDGE('',*,*,#87548,.F.); +#88067 = PLANE('',#88068); +#88068 = AXIS2_PLACEMENT_3D('',#88069,#88070,#88071); +#88069 = CARTESIAN_POINT('',(-0.81,-2.54,1.27)); +#88070 = DIRECTION('',(-1.,1.748382715945E-16,-1.009429231697E-16)); +#88071 = DIRECTION('',(-1.748382715945E-16,-1.,-1.110223024625E-16)); +#88072 = ADVANCED_FACE('',(#88073),#88091,.T.); +#88073 = FACE_BOUND('',#88074,.T.); +#88074 = EDGE_LOOP('',(#88075,#88082,#88083,#88090)); +#88075 = ORIENTED_EDGE('',*,*,#88076,.F.); +#88076 = EDGE_CURVE('',#87463,#87439,#88077,.T.); +#88077 = CIRCLE('',#88078,1.27); +#88078 = AXIS2_PLACEMENT_3D('',#88079,#88080,#88081); +#88079 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#88080 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88081 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88082 = ORIENTED_EDGE('',*,*,#87462,.F.); +#88083 = ORIENTED_EDGE('',*,*,#88084,.T.); +#88084 = EDGE_CURVE('',#87455,#87447,#88085,.T.); +#88085 = CIRCLE('',#88086,1.27); +#88086 = AXIS2_PLACEMENT_3D('',#88087,#88088,#88089); +#88087 = CARTESIAN_POINT('',(5.89,-1.27,1.27)); +#88088 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88089 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88090 = ORIENTED_EDGE('',*,*,#87446,.T.); +#88091 = CYLINDRICAL_SURFACE('',#88092,1.27); +#88092 = AXIS2_PLACEMENT_3D('',#88093,#88094,#88095); +#88093 = CARTESIAN_POINT('',(6.19,-1.27,1.27)); +#88094 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#88095 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88096 = ADVANCED_FACE('',(#88097),#88101,.T.); +#88097 = FACE_BOUND('',#88098,.T.); +#88098 = EDGE_LOOP('',(#88099,#88100)); +#88099 = ORIENTED_EDGE('',*,*,#88084,.F.); +#88100 = ORIENTED_EDGE('',*,*,#87454,.F.); +#88101 = PLANE('',#88102); +#88102 = AXIS2_PLACEMENT_3D('',#88103,#88104,#88105); +#88103 = CARTESIAN_POINT('',(5.89,-2.54,1.27)); +#88104 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88105 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88106 = ADVANCED_FACE('',(#88107),#88125,.T.); +#88107 = FACE_BOUND('',#88108,.T.); +#88108 = EDGE_LOOP('',(#88109,#88110,#88117,#88118)); +#88109 = ORIENTED_EDGE('',*,*,#87533,.F.); +#88110 = ORIENTED_EDGE('',*,*,#88111,.F.); +#88111 = EDGE_CURVE('',#87518,#87526,#88112,.T.); +#88112 = CIRCLE('',#88113,1.27); +#88113 = AXIS2_PLACEMENT_3D('',#88114,#88115,#88116); +#88114 = CARTESIAN_POINT('',(-0.81,-8.94,1.27)); +#88115 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88116 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88117 = ORIENTED_EDGE('',*,*,#87517,.T.); +#88118 = ORIENTED_EDGE('',*,*,#88119,.T.); +#88119 = EDGE_CURVE('',#87322,#87347,#88120,.T.); +#88120 = CIRCLE('',#88121,1.27); +#88121 = AXIS2_PLACEMENT_3D('',#88122,#88123,#88124); +#88122 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#88123 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88124 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88125 = CYLINDRICAL_SURFACE('',#88126,1.27); +#88126 = AXIS2_PLACEMENT_3D('',#88127,#88128,#88129); +#88127 = CARTESIAN_POINT('',(-1.11,-8.94,1.27)); +#88128 = DIRECTION('',(-1.,3.330669073875E-16,-1.232595164408E-31)); +#88129 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88130 = ADVANCED_FACE('',(#88131),#88135,.F.); +#88131 = FACE_BOUND('',#88132,.F.); +#88132 = EDGE_LOOP('',(#88133,#88134)); +#88133 = ORIENTED_EDGE('',*,*,#88111,.F.); +#88134 = ORIENTED_EDGE('',*,*,#87525,.F.); +#88135 = PLANE('',#88136); +#88136 = AXIS2_PLACEMENT_3D('',#88137,#88138,#88139); +#88137 = CARTESIAN_POINT('',(-0.81,-10.21,1.27)); +#88138 = DIRECTION('',(-1.,3.49676543189E-16,8.444548485231E-29)); +#88139 = DIRECTION('',(-3.49676543189E-16,-1.,-1.110223024625E-16)); +#88140 = ADVANCED_FACE('',(#88141),#88159,.T.); +#88141 = FACE_BOUND('',#88142,.T.); +#88142 = EDGE_LOOP('',(#88143,#88150,#88151,#88158)); +#88143 = ORIENTED_EDGE('',*,*,#88144,.F.); +#88144 = EDGE_CURVE('',#87495,#87471,#88145,.T.); +#88145 = CIRCLE('',#88146,1.27); +#88146 = AXIS2_PLACEMENT_3D('',#88147,#88148,#88149); +#88147 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#88148 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88149 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88150 = ORIENTED_EDGE('',*,*,#87494,.F.); +#88151 = ORIENTED_EDGE('',*,*,#88152,.T.); +#88152 = EDGE_CURVE('',#87487,#87479,#88153,.T.); +#88153 = CIRCLE('',#88154,1.27); +#88154 = AXIS2_PLACEMENT_3D('',#88155,#88156,#88157); +#88155 = CARTESIAN_POINT('',(5.89,-8.94,1.27)); +#88156 = DIRECTION('',(1.,-3.330669073875E-16,8.628166150855E-32)); +#88157 = DIRECTION('',(3.330669073875E-16,1.,-6.162975822039E-32)); +#88158 = ORIENTED_EDGE('',*,*,#87478,.T.); +#88159 = CYLINDRICAL_SURFACE('',#88160,1.27); +#88160 = AXIS2_PLACEMENT_3D('',#88161,#88162,#88163); +#88161 = CARTESIAN_POINT('',(6.19,-8.94,1.27)); +#88162 = DIRECTION('',(1.,-3.330669073875E-16,1.232595164408E-31)); +#88163 = DIRECTION('',(3.330669073875E-16,1.,-7.395570986447E-32)); +#88164 = ADVANCED_FACE('',(#88165),#88169,.T.); +#88165 = FACE_BOUND('',#88166,.T.); +#88166 = EDGE_LOOP('',(#88167,#88168)); +#88167 = ORIENTED_EDGE('',*,*,#88152,.F.); +#88168 = ORIENTED_EDGE('',*,*,#87486,.F.); +#88169 = PLANE('',#88170); +#88170 = AXIS2_PLACEMENT_3D('',#88171,#88172,#88173); +#88171 = CARTESIAN_POINT('',(5.89,-10.21,1.27)); +#88172 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88173 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88174 = ADVANCED_FACE('',(#88175),#88200,.F.); +#88175 = FACE_BOUND('',#88176,.F.); +#88176 = EDGE_LOOP('',(#88177,#88178,#88186,#88194)); +#88177 = ORIENTED_EDGE('',*,*,#87564,.T.); +#88178 = ORIENTED_EDGE('',*,*,#88179,.T.); +#88179 = EDGE_CURVE('',#87567,#88180,#88182,.T.); +#88180 = VERTEX_POINT('',#88181); +#88181 = CARTESIAN_POINT('',(4.93,-2.79,-3.4)); +#88182 = LINE('',#88183,#88184); +#88183 = CARTESIAN_POINT('',(4.93,-2.79,0.6)); +#88184 = VECTOR('',#88185,1.); +#88185 = DIRECTION('',(0.,0.,-1.)); +#88186 = ORIENTED_EDGE('',*,*,#88187,.T.); +#88187 = EDGE_CURVE('',#88180,#88188,#88190,.T.); +#88188 = VERTEX_POINT('',#88189); +#88189 = CARTESIAN_POINT('',(4.93,-2.49,-3.4)); +#88190 = LINE('',#88191,#88192); +#88191 = CARTESIAN_POINT('',(4.93,-2.79,-3.4)); +#88192 = VECTOR('',#88193,1.); +#88193 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88194 = ORIENTED_EDGE('',*,*,#88195,.F.); +#88195 = EDGE_CURVE('',#87565,#88188,#88196,.T.); +#88196 = LINE('',#88197,#88198); +#88197 = CARTESIAN_POINT('',(4.93,-2.49,0.6)); +#88198 = VECTOR('',#88199,1.); +#88199 = DIRECTION('',(0.,0.,-1.)); +#88200 = PLANE('',#88201); +#88201 = AXIS2_PLACEMENT_3D('',#88202,#88203,#88204); +#88202 = CARTESIAN_POINT('',(4.93,-2.79,0.6)); +#88203 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88204 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88205 = ADVANCED_FACE('',(#88206),#88224,.F.); +#88206 = FACE_BOUND('',#88207,.F.); +#88207 = EDGE_LOOP('',(#88208,#88209,#88210,#88218)); +#88208 = ORIENTED_EDGE('',*,*,#87590,.T.); +#88209 = ORIENTED_EDGE('',*,*,#88195,.T.); +#88210 = ORIENTED_EDGE('',*,*,#88211,.T.); +#88211 = EDGE_CURVE('',#88188,#88212,#88214,.T.); +#88212 = VERTEX_POINT('',#88213); +#88213 = CARTESIAN_POINT('',(5.23,-2.49,-3.4)); +#88214 = LINE('',#88215,#88216); +#88215 = CARTESIAN_POINT('',(4.93,-2.49,-3.4)); +#88216 = VECTOR('',#88217,1.); +#88217 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88218 = ORIENTED_EDGE('',*,*,#88219,.F.); +#88219 = EDGE_CURVE('',#87583,#88212,#88220,.T.); +#88220 = LINE('',#88221,#88222); +#88221 = CARTESIAN_POINT('',(5.23,-2.49,0.6)); +#88222 = VECTOR('',#88223,1.); +#88223 = DIRECTION('',(0.,0.,-1.)); +#88224 = PLANE('',#88225); +#88225 = AXIS2_PLACEMENT_3D('',#88226,#88227,#88228); +#88226 = CARTESIAN_POINT('',(4.93,-2.49,0.6)); +#88227 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88228 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88229 = ADVANCED_FACE('',(#88230),#88248,.F.); +#88230 = FACE_BOUND('',#88231,.F.); +#88231 = EDGE_LOOP('',(#88232,#88233,#88234,#88242)); +#88232 = ORIENTED_EDGE('',*,*,#87582,.T.); +#88233 = ORIENTED_EDGE('',*,*,#88219,.T.); +#88234 = ORIENTED_EDGE('',*,*,#88235,.T.); +#88235 = EDGE_CURVE('',#88212,#88236,#88238,.T.); +#88236 = VERTEX_POINT('',#88237); +#88237 = CARTESIAN_POINT('',(5.23,-2.79,-3.4)); +#88238 = LINE('',#88239,#88240); +#88239 = CARTESIAN_POINT('',(5.23,-2.49,-3.4)); +#88240 = VECTOR('',#88241,1.); +#88241 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88242 = ORIENTED_EDGE('',*,*,#88243,.F.); +#88243 = EDGE_CURVE('',#87575,#88236,#88244,.T.); +#88244 = LINE('',#88245,#88246); +#88245 = CARTESIAN_POINT('',(5.23,-2.79,0.6)); +#88246 = VECTOR('',#88247,1.); +#88247 = DIRECTION('',(0.,0.,-1.)); +#88248 = PLANE('',#88249); +#88249 = AXIS2_PLACEMENT_3D('',#88250,#88251,#88252); +#88250 = CARTESIAN_POINT('',(5.23,-2.49,0.6)); +#88251 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88252 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88253 = ADVANCED_FACE('',(#88254),#88265,.F.); +#88254 = FACE_BOUND('',#88255,.F.); +#88255 = EDGE_LOOP('',(#88256,#88257,#88258,#88264)); +#88256 = ORIENTED_EDGE('',*,*,#87574,.T.); +#88257 = ORIENTED_EDGE('',*,*,#88243,.T.); +#88258 = ORIENTED_EDGE('',*,*,#88259,.T.); +#88259 = EDGE_CURVE('',#88236,#88180,#88260,.T.); +#88260 = LINE('',#88261,#88262); +#88261 = CARTESIAN_POINT('',(5.23,-2.79,-3.4)); +#88262 = VECTOR('',#88263,1.); +#88263 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88264 = ORIENTED_EDGE('',*,*,#88179,.F.); +#88265 = PLANE('',#88266); +#88266 = AXIS2_PLACEMENT_3D('',#88267,#88268,#88269); +#88267 = CARTESIAN_POINT('',(5.23,-2.79,0.6)); +#88268 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88269 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88270 = ADVANCED_FACE('',(#88271),#88296,.T.); +#88271 = FACE_BOUND('',#88272,.T.); +#88272 = EDGE_LOOP('',(#88273,#88274,#88282,#88290)); +#88273 = ORIENTED_EDGE('',*,*,#87598,.T.); +#88274 = ORIENTED_EDGE('',*,*,#88275,.T.); +#88275 = EDGE_CURVE('',#87601,#88276,#88278,.T.); +#88276 = VERTEX_POINT('',#88277); +#88277 = CARTESIAN_POINT('',(0.15,-2.49,-3.4)); +#88278 = LINE('',#88279,#88280); +#88279 = CARTESIAN_POINT('',(0.15,-2.49,0.6)); +#88280 = VECTOR('',#88281,1.); +#88281 = DIRECTION('',(0.,0.,-1.)); +#88282 = ORIENTED_EDGE('',*,*,#88283,.T.); +#88283 = EDGE_CURVE('',#88276,#88284,#88286,.T.); +#88284 = VERTEX_POINT('',#88285); +#88285 = CARTESIAN_POINT('',(-0.15,-2.49,-3.4)); +#88286 = LINE('',#88287,#88288); +#88287 = CARTESIAN_POINT('',(0.15,-2.49,-3.4)); +#88288 = VECTOR('',#88289,1.); +#88289 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88290 = ORIENTED_EDGE('',*,*,#88291,.F.); +#88291 = EDGE_CURVE('',#87599,#88284,#88292,.T.); +#88292 = LINE('',#88293,#88294); +#88293 = CARTESIAN_POINT('',(-0.15,-2.49,0.6)); +#88294 = VECTOR('',#88295,1.); +#88295 = DIRECTION('',(0.,0.,-1.)); +#88296 = PLANE('',#88297); +#88297 = AXIS2_PLACEMENT_3D('',#88298,#88299,#88300); +#88298 = CARTESIAN_POINT('',(0.15,-2.49,0.6)); +#88299 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88300 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88301 = ADVANCED_FACE('',(#88302),#88320,.T.); +#88302 = FACE_BOUND('',#88303,.T.); +#88303 = EDGE_LOOP('',(#88304,#88305,#88313,#88319)); +#88304 = ORIENTED_EDGE('',*,*,#87624,.T.); +#88305 = ORIENTED_EDGE('',*,*,#88306,.T.); +#88306 = EDGE_CURVE('',#87617,#88307,#88309,.T.); +#88307 = VERTEX_POINT('',#88308); +#88308 = CARTESIAN_POINT('',(0.15,-2.79,-3.4)); +#88309 = LINE('',#88310,#88311); +#88310 = CARTESIAN_POINT('',(0.15,-2.79,0.6)); +#88311 = VECTOR('',#88312,1.); +#88312 = DIRECTION('',(0.,0.,-1.)); +#88313 = ORIENTED_EDGE('',*,*,#88314,.T.); +#88314 = EDGE_CURVE('',#88307,#88276,#88315,.T.); +#88315 = LINE('',#88316,#88317); +#88316 = CARTESIAN_POINT('',(0.15,-2.79,-3.4)); +#88317 = VECTOR('',#88318,1.); +#88318 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88319 = ORIENTED_EDGE('',*,*,#88275,.F.); +#88320 = PLANE('',#88321); +#88321 = AXIS2_PLACEMENT_3D('',#88322,#88323,#88324); +#88322 = CARTESIAN_POINT('',(0.15,-2.79,0.6)); +#88323 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88324 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88325 = ADVANCED_FACE('',(#88326),#88344,.T.); +#88326 = FACE_BOUND('',#88327,.T.); +#88327 = EDGE_LOOP('',(#88328,#88329,#88337,#88343)); +#88328 = ORIENTED_EDGE('',*,*,#87616,.T.); +#88329 = ORIENTED_EDGE('',*,*,#88330,.T.); +#88330 = EDGE_CURVE('',#87609,#88331,#88333,.T.); +#88331 = VERTEX_POINT('',#88332); +#88332 = CARTESIAN_POINT('',(-0.15,-2.79,-3.4)); +#88333 = LINE('',#88334,#88335); +#88334 = CARTESIAN_POINT('',(-0.15,-2.79,0.6)); +#88335 = VECTOR('',#88336,1.); +#88336 = DIRECTION('',(0.,0.,-1.)); +#88337 = ORIENTED_EDGE('',*,*,#88338,.T.); +#88338 = EDGE_CURVE('',#88331,#88307,#88339,.T.); +#88339 = LINE('',#88340,#88341); +#88340 = CARTESIAN_POINT('',(-0.15,-2.79,-3.4)); +#88341 = VECTOR('',#88342,1.); +#88342 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88343 = ORIENTED_EDGE('',*,*,#88306,.F.); +#88344 = PLANE('',#88345); +#88345 = AXIS2_PLACEMENT_3D('',#88346,#88347,#88348); +#88346 = CARTESIAN_POINT('',(-0.15,-2.79,0.6)); +#88347 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88348 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88349 = ADVANCED_FACE('',(#88350),#88361,.T.); +#88350 = FACE_BOUND('',#88351,.T.); +#88351 = EDGE_LOOP('',(#88352,#88353,#88354,#88360)); +#88352 = ORIENTED_EDGE('',*,*,#87608,.T.); +#88353 = ORIENTED_EDGE('',*,*,#88291,.T.); +#88354 = ORIENTED_EDGE('',*,*,#88355,.T.); +#88355 = EDGE_CURVE('',#88284,#88331,#88356,.T.); +#88356 = LINE('',#88357,#88358); +#88357 = CARTESIAN_POINT('',(-0.15,-2.49,-3.4)); +#88358 = VECTOR('',#88359,1.); +#88359 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88360 = ORIENTED_EDGE('',*,*,#88330,.F.); +#88361 = PLANE('',#88362); +#88362 = AXIS2_PLACEMENT_3D('',#88363,#88364,#88365); +#88363 = CARTESIAN_POINT('',(-0.15,-2.49,0.6)); +#88364 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88365 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88366 = ADVANCED_FACE('',(#88367),#88392,.T.); +#88367 = FACE_BOUND('',#88368,.T.); +#88368 = EDGE_LOOP('',(#88369,#88370,#88378,#88386)); +#88369 = ORIENTED_EDGE('',*,*,#87632,.T.); +#88370 = ORIENTED_EDGE('',*,*,#88371,.T.); +#88371 = EDGE_CURVE('',#87635,#88372,#88374,.T.); +#88372 = VERTEX_POINT('',#88373); +#88373 = CARTESIAN_POINT('',(-0.15,-10.41,-3.4)); +#88374 = LINE('',#88375,#88376); +#88375 = CARTESIAN_POINT('',(-0.15,-10.41,0.6)); +#88376 = VECTOR('',#88377,1.); +#88377 = DIRECTION('',(0.,0.,-1.)); +#88378 = ORIENTED_EDGE('',*,*,#88379,.T.); +#88379 = EDGE_CURVE('',#88372,#88380,#88382,.T.); +#88380 = VERTEX_POINT('',#88381); +#88381 = CARTESIAN_POINT('',(0.15,-10.41,-3.4)); +#88382 = LINE('',#88383,#88384); +#88383 = CARTESIAN_POINT('',(-0.15,-10.41,-3.4)); +#88384 = VECTOR('',#88385,1.); +#88385 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88386 = ORIENTED_EDGE('',*,*,#88387,.F.); +#88387 = EDGE_CURVE('',#87633,#88380,#88388,.T.); +#88388 = LINE('',#88389,#88390); +#88389 = CARTESIAN_POINT('',(0.15,-10.41,0.6)); +#88390 = VECTOR('',#88391,1.); +#88391 = DIRECTION('',(0.,0.,-1.)); +#88392 = PLANE('',#88393); +#88393 = AXIS2_PLACEMENT_3D('',#88394,#88395,#88396); +#88394 = CARTESIAN_POINT('',(-0.15,-10.41,0.6)); +#88395 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88396 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88397 = ADVANCED_FACE('',(#88398),#88416,.T.); +#88398 = FACE_BOUND('',#88399,.T.); +#88399 = EDGE_LOOP('',(#88400,#88401,#88409,#88415)); +#88400 = ORIENTED_EDGE('',*,*,#87658,.T.); +#88401 = ORIENTED_EDGE('',*,*,#88402,.T.); +#88402 = EDGE_CURVE('',#87651,#88403,#88405,.T.); +#88403 = VERTEX_POINT('',#88404); +#88404 = CARTESIAN_POINT('',(-0.15,-10.11,-3.4)); +#88405 = LINE('',#88406,#88407); +#88406 = CARTESIAN_POINT('',(-0.15,-10.11,0.6)); +#88407 = VECTOR('',#88408,1.); +#88408 = DIRECTION('',(0.,0.,-1.)); +#88409 = ORIENTED_EDGE('',*,*,#88410,.T.); +#88410 = EDGE_CURVE('',#88403,#88372,#88411,.T.); +#88411 = LINE('',#88412,#88413); +#88412 = CARTESIAN_POINT('',(-0.15,-10.11,-3.4)); +#88413 = VECTOR('',#88414,1.); +#88414 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88415 = ORIENTED_EDGE('',*,*,#88371,.F.); +#88416 = PLANE('',#88417); +#88417 = AXIS2_PLACEMENT_3D('',#88418,#88419,#88420); +#88418 = CARTESIAN_POINT('',(-0.15,-10.11,0.6)); +#88419 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88420 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88421 = ADVANCED_FACE('',(#88422),#88440,.T.); +#88422 = FACE_BOUND('',#88423,.T.); +#88423 = EDGE_LOOP('',(#88424,#88425,#88433,#88439)); +#88424 = ORIENTED_EDGE('',*,*,#87650,.T.); +#88425 = ORIENTED_EDGE('',*,*,#88426,.T.); +#88426 = EDGE_CURVE('',#87643,#88427,#88429,.T.); +#88427 = VERTEX_POINT('',#88428); +#88428 = CARTESIAN_POINT('',(0.15,-10.11,-3.4)); +#88429 = LINE('',#88430,#88431); +#88430 = CARTESIAN_POINT('',(0.15,-10.11,0.6)); +#88431 = VECTOR('',#88432,1.); +#88432 = DIRECTION('',(0.,0.,-1.)); +#88433 = ORIENTED_EDGE('',*,*,#88434,.T.); +#88434 = EDGE_CURVE('',#88427,#88403,#88435,.T.); +#88435 = LINE('',#88436,#88437); +#88436 = CARTESIAN_POINT('',(0.15,-10.11,-3.4)); +#88437 = VECTOR('',#88438,1.); +#88438 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88439 = ORIENTED_EDGE('',*,*,#88402,.F.); +#88440 = PLANE('',#88441); +#88441 = AXIS2_PLACEMENT_3D('',#88442,#88443,#88444); +#88442 = CARTESIAN_POINT('',(0.15,-10.11,0.6)); +#88443 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88444 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88445 = ADVANCED_FACE('',(#88446),#88457,.T.); +#88446 = FACE_BOUND('',#88447,.T.); +#88447 = EDGE_LOOP('',(#88448,#88449,#88450,#88456)); +#88448 = ORIENTED_EDGE('',*,*,#87642,.T.); +#88449 = ORIENTED_EDGE('',*,*,#88387,.T.); +#88450 = ORIENTED_EDGE('',*,*,#88451,.T.); +#88451 = EDGE_CURVE('',#88380,#88427,#88452,.T.); +#88452 = LINE('',#88453,#88454); +#88453 = CARTESIAN_POINT('',(0.15,-10.41,-3.4)); +#88454 = VECTOR('',#88455,1.); +#88455 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88456 = ORIENTED_EDGE('',*,*,#88426,.F.); +#88457 = PLANE('',#88458); +#88458 = AXIS2_PLACEMENT_3D('',#88459,#88460,#88461); +#88459 = CARTESIAN_POINT('',(0.15,-10.41,0.6)); +#88460 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88461 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88462 = ADVANCED_FACE('',(#88463),#88488,.F.); +#88463 = FACE_BOUND('',#88464,.F.); +#88464 = EDGE_LOOP('',(#88465,#88466,#88474,#88482)); +#88465 = ORIENTED_EDGE('',*,*,#87666,.T.); +#88466 = ORIENTED_EDGE('',*,*,#88467,.T.); +#88467 = EDGE_CURVE('',#87669,#88468,#88470,.T.); +#88468 = VERTEX_POINT('',#88469); +#88469 = CARTESIAN_POINT('',(5.23,-10.11,-3.4)); +#88470 = LINE('',#88471,#88472); +#88471 = CARTESIAN_POINT('',(5.23,-10.11,0.6)); +#88472 = VECTOR('',#88473,1.); +#88473 = DIRECTION('',(0.,0.,-1.)); +#88474 = ORIENTED_EDGE('',*,*,#88475,.T.); +#88475 = EDGE_CURVE('',#88468,#88476,#88478,.T.); +#88476 = VERTEX_POINT('',#88477); +#88477 = CARTESIAN_POINT('',(5.23,-10.41,-3.4)); +#88478 = LINE('',#88479,#88480); +#88479 = CARTESIAN_POINT('',(5.23,-10.11,-3.4)); +#88480 = VECTOR('',#88481,1.); +#88481 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88482 = ORIENTED_EDGE('',*,*,#88483,.F.); +#88483 = EDGE_CURVE('',#87667,#88476,#88484,.T.); +#88484 = LINE('',#88485,#88486); +#88485 = CARTESIAN_POINT('',(5.23,-10.41,0.6)); +#88486 = VECTOR('',#88487,1.); +#88487 = DIRECTION('',(0.,0.,-1.)); +#88488 = PLANE('',#88489); +#88489 = AXIS2_PLACEMENT_3D('',#88490,#88491,#88492); +#88490 = CARTESIAN_POINT('',(5.23,-10.11,0.6)); +#88491 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88492 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88493 = ADVANCED_FACE('',(#88494),#88512,.F.); +#88494 = FACE_BOUND('',#88495,.F.); +#88495 = EDGE_LOOP('',(#88496,#88497,#88498,#88506)); +#88496 = ORIENTED_EDGE('',*,*,#87692,.T.); +#88497 = ORIENTED_EDGE('',*,*,#88483,.T.); +#88498 = ORIENTED_EDGE('',*,*,#88499,.T.); +#88499 = EDGE_CURVE('',#88476,#88500,#88502,.T.); +#88500 = VERTEX_POINT('',#88501); +#88501 = CARTESIAN_POINT('',(4.93,-10.41,-3.4)); +#88502 = LINE('',#88503,#88504); +#88503 = CARTESIAN_POINT('',(5.23,-10.41,-3.4)); +#88504 = VECTOR('',#88505,1.); +#88505 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88506 = ORIENTED_EDGE('',*,*,#88507,.F.); +#88507 = EDGE_CURVE('',#87685,#88500,#88508,.T.); +#88508 = LINE('',#88509,#88510); +#88509 = CARTESIAN_POINT('',(4.93,-10.41,0.6)); +#88510 = VECTOR('',#88511,1.); +#88511 = DIRECTION('',(0.,0.,-1.)); +#88512 = PLANE('',#88513); +#88513 = AXIS2_PLACEMENT_3D('',#88514,#88515,#88516); +#88514 = CARTESIAN_POINT('',(5.23,-10.41,0.6)); +#88515 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88516 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88517 = ADVANCED_FACE('',(#88518),#88536,.F.); +#88518 = FACE_BOUND('',#88519,.F.); +#88519 = EDGE_LOOP('',(#88520,#88521,#88522,#88530)); +#88520 = ORIENTED_EDGE('',*,*,#87684,.T.); +#88521 = ORIENTED_EDGE('',*,*,#88507,.T.); +#88522 = ORIENTED_EDGE('',*,*,#88523,.T.); +#88523 = EDGE_CURVE('',#88500,#88524,#88526,.T.); +#88524 = VERTEX_POINT('',#88525); +#88525 = CARTESIAN_POINT('',(4.93,-10.11,-3.4)); +#88526 = LINE('',#88527,#88528); +#88527 = CARTESIAN_POINT('',(4.93,-10.41,-3.4)); +#88528 = VECTOR('',#88529,1.); +#88529 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88530 = ORIENTED_EDGE('',*,*,#88531,.F.); +#88531 = EDGE_CURVE('',#87677,#88524,#88532,.T.); +#88532 = LINE('',#88533,#88534); +#88533 = CARTESIAN_POINT('',(4.93,-10.11,0.6)); +#88534 = VECTOR('',#88535,1.); +#88535 = DIRECTION('',(0.,0.,-1.)); +#88536 = PLANE('',#88537); +#88537 = AXIS2_PLACEMENT_3D('',#88538,#88539,#88540); +#88538 = CARTESIAN_POINT('',(4.93,-10.41,0.6)); +#88539 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88540 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88541 = ADVANCED_FACE('',(#88542),#88553,.F.); +#88542 = FACE_BOUND('',#88543,.F.); +#88543 = EDGE_LOOP('',(#88544,#88545,#88546,#88552)); +#88544 = ORIENTED_EDGE('',*,*,#87676,.T.); +#88545 = ORIENTED_EDGE('',*,*,#88531,.T.); +#88546 = ORIENTED_EDGE('',*,*,#88547,.T.); +#88547 = EDGE_CURVE('',#88524,#88468,#88548,.T.); +#88548 = LINE('',#88549,#88550); +#88549 = CARTESIAN_POINT('',(4.93,-10.11,-3.4)); +#88550 = VECTOR('',#88551,1.); +#88551 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88552 = ORIENTED_EDGE('',*,*,#88467,.F.); +#88553 = PLANE('',#88554); +#88554 = AXIS2_PLACEMENT_3D('',#88555,#88556,#88557); +#88555 = CARTESIAN_POINT('',(4.93,-10.11,0.6)); +#88556 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88557 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88558 = ADVANCED_FACE('',(#88559),#88584,.T.); +#88559 = FACE_BOUND('',#88560,.T.); +#88560 = EDGE_LOOP('',(#88561,#88562,#88570,#88578)); +#88561 = ORIENTED_EDGE('',*,*,#87700,.T.); +#88562 = ORIENTED_EDGE('',*,*,#88563,.T.); +#88563 = EDGE_CURVE('',#87703,#88564,#88566,.T.); +#88564 = VERTEX_POINT('',#88565); +#88565 = CARTESIAN_POINT('',(0.25,-0.25,-3.4)); +#88566 = LINE('',#88567,#88568); +#88567 = CARTESIAN_POINT('',(0.25,-0.25,0.6)); +#88568 = VECTOR('',#88569,1.); +#88569 = DIRECTION('',(0.,0.,-1.)); +#88570 = ORIENTED_EDGE('',*,*,#88571,.T.); +#88571 = EDGE_CURVE('',#88564,#88572,#88574,.T.); +#88572 = VERTEX_POINT('',#88573); +#88573 = CARTESIAN_POINT('',(0.25,0.25,-3.4)); +#88574 = LINE('',#88575,#88576); +#88575 = CARTESIAN_POINT('',(0.25,-0.25,-3.4)); +#88576 = VECTOR('',#88577,1.); +#88577 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88578 = ORIENTED_EDGE('',*,*,#88579,.F.); +#88579 = EDGE_CURVE('',#87701,#88572,#88580,.T.); +#88580 = LINE('',#88581,#88582); +#88581 = CARTESIAN_POINT('',(0.25,0.25,0.6)); +#88582 = VECTOR('',#88583,1.); +#88583 = DIRECTION('',(0.,0.,-1.)); +#88584 = PLANE('',#88585); +#88585 = AXIS2_PLACEMENT_3D('',#88586,#88587,#88588); +#88586 = CARTESIAN_POINT('',(0.25,-0.25,0.6)); +#88587 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88588 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88589 = ADVANCED_FACE('',(#88590),#88608,.T.); +#88590 = FACE_BOUND('',#88591,.T.); +#88591 = EDGE_LOOP('',(#88592,#88593,#88601,#88607)); +#88592 = ORIENTED_EDGE('',*,*,#87726,.T.); +#88593 = ORIENTED_EDGE('',*,*,#88594,.T.); +#88594 = EDGE_CURVE('',#87719,#88595,#88597,.T.); +#88595 = VERTEX_POINT('',#88596); +#88596 = CARTESIAN_POINT('',(-0.25,-0.25,-3.4)); +#88597 = LINE('',#88598,#88599); +#88598 = CARTESIAN_POINT('',(-0.25,-0.25,0.6)); +#88599 = VECTOR('',#88600,1.); +#88600 = DIRECTION('',(0.,0.,-1.)); +#88601 = ORIENTED_EDGE('',*,*,#88602,.T.); +#88602 = EDGE_CURVE('',#88595,#88564,#88603,.T.); +#88603 = LINE('',#88604,#88605); +#88604 = CARTESIAN_POINT('',(-0.25,-0.25,-3.4)); +#88605 = VECTOR('',#88606,1.); +#88606 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88607 = ORIENTED_EDGE('',*,*,#88563,.F.); +#88608 = PLANE('',#88609); +#88609 = AXIS2_PLACEMENT_3D('',#88610,#88611,#88612); +#88610 = CARTESIAN_POINT('',(-0.25,-0.25,0.6)); +#88611 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88612 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88613 = ADVANCED_FACE('',(#88614),#88632,.T.); +#88614 = FACE_BOUND('',#88615,.T.); +#88615 = EDGE_LOOP('',(#88616,#88617,#88625,#88631)); +#88616 = ORIENTED_EDGE('',*,*,#87718,.T.); +#88617 = ORIENTED_EDGE('',*,*,#88618,.T.); +#88618 = EDGE_CURVE('',#87711,#88619,#88621,.T.); +#88619 = VERTEX_POINT('',#88620); +#88620 = CARTESIAN_POINT('',(-0.25,0.25,-3.4)); +#88621 = LINE('',#88622,#88623); +#88622 = CARTESIAN_POINT('',(-0.25,0.25,0.6)); +#88623 = VECTOR('',#88624,1.); +#88624 = DIRECTION('',(0.,0.,-1.)); +#88625 = ORIENTED_EDGE('',*,*,#88626,.T.); +#88626 = EDGE_CURVE('',#88619,#88595,#88627,.T.); +#88627 = LINE('',#88628,#88629); +#88628 = CARTESIAN_POINT('',(-0.25,0.25,-3.4)); +#88629 = VECTOR('',#88630,1.); +#88630 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88631 = ORIENTED_EDGE('',*,*,#88594,.F.); +#88632 = PLANE('',#88633); +#88633 = AXIS2_PLACEMENT_3D('',#88634,#88635,#88636); +#88634 = CARTESIAN_POINT('',(-0.25,0.25,0.6)); +#88635 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88636 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88637 = ADVANCED_FACE('',(#88638),#88649,.T.); +#88638 = FACE_BOUND('',#88639,.T.); +#88639 = EDGE_LOOP('',(#88640,#88641,#88642,#88648)); +#88640 = ORIENTED_EDGE('',*,*,#87710,.T.); +#88641 = ORIENTED_EDGE('',*,*,#88579,.T.); +#88642 = ORIENTED_EDGE('',*,*,#88643,.T.); +#88643 = EDGE_CURVE('',#88572,#88619,#88644,.T.); +#88644 = LINE('',#88645,#88646); +#88645 = CARTESIAN_POINT('',(0.25,0.25,-3.4)); +#88646 = VECTOR('',#88647,1.); +#88647 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88648 = ORIENTED_EDGE('',*,*,#88618,.F.); +#88649 = PLANE('',#88650); +#88650 = AXIS2_PLACEMENT_3D('',#88651,#88652,#88653); +#88651 = CARTESIAN_POINT('',(0.25,0.25,0.6)); +#88652 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88653 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88654 = ADVANCED_FACE('',(#88655),#88680,.T.); +#88655 = FACE_BOUND('',#88656,.T.); +#88656 = EDGE_LOOP('',(#88657,#88658,#88666,#88674)); +#88657 = ORIENTED_EDGE('',*,*,#87734,.T.); +#88658 = ORIENTED_EDGE('',*,*,#88659,.T.); +#88659 = EDGE_CURVE('',#87737,#88660,#88662,.T.); +#88660 = VERTEX_POINT('',#88661); +#88661 = CARTESIAN_POINT('',(5.33,-0.25,-3.4)); +#88662 = LINE('',#88663,#88664); +#88663 = CARTESIAN_POINT('',(5.33,-0.25,0.6)); +#88664 = VECTOR('',#88665,1.); +#88665 = DIRECTION('',(0.,0.,-1.)); +#88666 = ORIENTED_EDGE('',*,*,#88667,.T.); +#88667 = EDGE_CURVE('',#88660,#88668,#88670,.T.); +#88668 = VERTEX_POINT('',#88669); +#88669 = CARTESIAN_POINT('',(5.33,0.25,-3.4)); +#88670 = LINE('',#88671,#88672); +#88671 = CARTESIAN_POINT('',(5.33,-0.25,-3.4)); +#88672 = VECTOR('',#88673,1.); +#88673 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88674 = ORIENTED_EDGE('',*,*,#88675,.F.); +#88675 = EDGE_CURVE('',#87735,#88668,#88676,.T.); +#88676 = LINE('',#88677,#88678); +#88677 = CARTESIAN_POINT('',(5.33,0.25,0.6)); +#88678 = VECTOR('',#88679,1.); +#88679 = DIRECTION('',(0.,0.,-1.)); +#88680 = PLANE('',#88681); +#88681 = AXIS2_PLACEMENT_3D('',#88682,#88683,#88684); +#88682 = CARTESIAN_POINT('',(5.33,-0.25,0.6)); +#88683 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88684 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88685 = ADVANCED_FACE('',(#88686),#88704,.T.); +#88686 = FACE_BOUND('',#88687,.T.); +#88687 = EDGE_LOOP('',(#88688,#88689,#88697,#88703)); +#88688 = ORIENTED_EDGE('',*,*,#87760,.T.); +#88689 = ORIENTED_EDGE('',*,*,#88690,.T.); +#88690 = EDGE_CURVE('',#87753,#88691,#88693,.T.); +#88691 = VERTEX_POINT('',#88692); +#88692 = CARTESIAN_POINT('',(4.83,-0.25,-3.4)); +#88693 = LINE('',#88694,#88695); +#88694 = CARTESIAN_POINT('',(4.83,-0.25,0.6)); +#88695 = VECTOR('',#88696,1.); +#88696 = DIRECTION('',(0.,0.,-1.)); +#88697 = ORIENTED_EDGE('',*,*,#88698,.T.); +#88698 = EDGE_CURVE('',#88691,#88660,#88699,.T.); +#88699 = LINE('',#88700,#88701); +#88700 = CARTESIAN_POINT('',(4.83,-0.25,-3.4)); +#88701 = VECTOR('',#88702,1.); +#88702 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88703 = ORIENTED_EDGE('',*,*,#88659,.F.); +#88704 = PLANE('',#88705); +#88705 = AXIS2_PLACEMENT_3D('',#88706,#88707,#88708); +#88706 = CARTESIAN_POINT('',(4.83,-0.25,0.6)); +#88707 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88708 = DIRECTION('',(1.,-5.551115123126E-16,0.)); +#88709 = ADVANCED_FACE('',(#88710),#88728,.T.); +#88710 = FACE_BOUND('',#88711,.T.); +#88711 = EDGE_LOOP('',(#88712,#88713,#88721,#88727)); +#88712 = ORIENTED_EDGE('',*,*,#87752,.T.); +#88713 = ORIENTED_EDGE('',*,*,#88714,.T.); +#88714 = EDGE_CURVE('',#87745,#88715,#88717,.T.); +#88715 = VERTEX_POINT('',#88716); +#88716 = CARTESIAN_POINT('',(4.83,0.25,-3.4)); +#88717 = LINE('',#88718,#88719); +#88718 = CARTESIAN_POINT('',(4.83,0.25,0.6)); +#88719 = VECTOR('',#88720,1.); +#88720 = DIRECTION('',(0.,0.,-1.)); +#88721 = ORIENTED_EDGE('',*,*,#88722,.T.); +#88722 = EDGE_CURVE('',#88715,#88691,#88723,.T.); +#88723 = LINE('',#88724,#88725); +#88724 = CARTESIAN_POINT('',(4.83,0.25,-3.4)); +#88725 = VECTOR('',#88726,1.); +#88726 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88727 = ORIENTED_EDGE('',*,*,#88690,.F.); +#88728 = PLANE('',#88729); +#88729 = AXIS2_PLACEMENT_3D('',#88730,#88731,#88732); +#88730 = CARTESIAN_POINT('',(4.83,0.25,0.6)); +#88731 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88732 = DIRECTION('',(-5.551115123126E-16,-1.,0.)); +#88733 = ADVANCED_FACE('',(#88734),#88745,.T.); +#88734 = FACE_BOUND('',#88735,.T.); +#88735 = EDGE_LOOP('',(#88736,#88737,#88738,#88744)); +#88736 = ORIENTED_EDGE('',*,*,#87744,.T.); +#88737 = ORIENTED_EDGE('',*,*,#88675,.T.); +#88738 = ORIENTED_EDGE('',*,*,#88739,.T.); +#88739 = EDGE_CURVE('',#88668,#88715,#88740,.T.); +#88740 = LINE('',#88741,#88742); +#88741 = CARTESIAN_POINT('',(5.33,0.25,-3.4)); +#88742 = VECTOR('',#88743,1.); +#88743 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88744 = ORIENTED_EDGE('',*,*,#88714,.F.); +#88745 = PLANE('',#88746); +#88746 = AXIS2_PLACEMENT_3D('',#88747,#88748,#88749); +#88747 = CARTESIAN_POINT('',(5.33,0.25,0.6)); +#88748 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#88749 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#88750 = ADVANCED_FACE('',(#88751),#88769,.T.); +#88751 = FACE_BOUND('',#88752,.T.); +#88752 = EDGE_LOOP('',(#88753,#88760,#88761,#88768)); +#88753 = ORIENTED_EDGE('',*,*,#88754,.T.); +#88754 = EDGE_CURVE('',#87876,#87775,#88755,.T.); +#88755 = ELLIPSE('',#88756,0.212132034356,0.15); +#88756 = AXIS2_PLACEMENT_3D('',#88757,#88758,#88759); +#88757 = CARTESIAN_POINT('',(6.04,-11.08,9.85)); +#88758 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#88759 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#88760 = ORIENTED_EDGE('',*,*,#87774,.T.); +#88761 = ORIENTED_EDGE('',*,*,#88762,.F.); +#88762 = EDGE_CURVE('',#87868,#87777,#88763,.T.); +#88763 = ELLIPSE('',#88764,0.212132034356,0.15); +#88764 = AXIS2_PLACEMENT_3D('',#88765,#88766,#88767); +#88765 = CARTESIAN_POINT('',(6.04,-0.519999999999,9.85)); +#88766 = DIRECTION('',(7.716601596997E-17,0.707106781187,0.707106781187) + ); +#88767 = DIRECTION('',(1.178907950976E-15,0.707106781187,-0.707106781187 + )); +#88768 = ORIENTED_EDGE('',*,*,#87875,.F.); +#88769 = CYLINDRICAL_SURFACE('',#88770,0.15); +#88770 = AXIS2_PLACEMENT_3D('',#88771,#88772,#88773); +#88771 = CARTESIAN_POINT('',(6.04,-11.23,9.85)); +#88772 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88773 = DIRECTION('',(0.,-0.,1.)); +#88774 = ADVANCED_FACE('',(#88775),#88786,.F.); +#88775 = FACE_BOUND('',#88776,.F.); +#88776 = EDGE_LOOP('',(#88777,#88778,#88779,#88780)); +#88777 = ORIENTED_EDGE('',*,*,#87843,.F.); +#88778 = ORIENTED_EDGE('',*,*,#87835,.T.); +#88779 = ORIENTED_EDGE('',*,*,#87826,.F.); +#88780 = ORIENTED_EDGE('',*,*,#88781,.F.); +#88781 = EDGE_CURVE('',#87495,#87471,#88782,.T.); +#88782 = LINE('',#88783,#88784); +#88783 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#88784 = VECTOR('',#88785,1.); +#88785 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88786 = PLANE('',#88787); +#88787 = AXIS2_PLACEMENT_3D('',#88788,#88789,#88790); +#88788 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#88789 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88790 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88791 = ADVANCED_FACE('',(#88792),#88803,.F.); +#88792 = FACE_BOUND('',#88793,.F.); +#88793 = EDGE_LOOP('',(#88794,#88795,#88796,#88797)); +#88794 = ORIENTED_EDGE('',*,*,#87818,.F.); +#88795 = ORIENTED_EDGE('',*,*,#87810,.T.); +#88796 = ORIENTED_EDGE('',*,*,#87801,.F.); +#88797 = ORIENTED_EDGE('',*,*,#88798,.F.); +#88798 = EDGE_CURVE('',#87463,#87439,#88799,.T.); +#88799 = LINE('',#88800,#88801); +#88800 = CARTESIAN_POINT('',(6.19,-11.23,0.5)); +#88801 = VECTOR('',#88802,1.); +#88802 = DIRECTION('',(8.881784197001E-16,1.,0.)); +#88803 = PLANE('',#88804); +#88804 = AXIS2_PLACEMENT_3D('',#88805,#88806,#88807); +#88805 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#88806 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88807 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88808 = ADVANCED_FACE('',(#88809),#88816,.F.); +#88809 = FACE_BOUND('',#88810,.T.); +#88810 = EDGE_LOOP('',(#88811,#88812,#88813,#88814,#88815)); +#88811 = ORIENTED_EDGE('',*,*,#87865,.T.); +#88812 = ORIENTED_EDGE('',*,*,#88762,.T.); +#88813 = ORIENTED_EDGE('',*,*,#87784,.T.); +#88814 = ORIENTED_EDGE('',*,*,#88028,.F.); +#88815 = ORIENTED_EDGE('',*,*,#87923,.F.); +#88816 = PLANE('',#88817); +#88817 = AXIS2_PLACEMENT_3D('',#88818,#88819,#88820); +#88818 = CARTESIAN_POINT('',(5.690001011944,-0.549999999999,9.88)); +#88819 = DIRECTION('',(-7.716601596997E-17,-0.707106781187, + -0.707106781187)); +#88820 = DIRECTION('',(-1.,1.100757644008E-16,-9.465380617391E-19)); +#88821 = ADVANCED_FACE('',(#88822),#88828,.T.); +#88822 = FACE_BOUND('',#88823,.T.); +#88823 = EDGE_LOOP('',(#88824,#88825,#88826,#88827)); +#88824 = ORIENTED_EDGE('',*,*,#87941,.T.); +#88825 = ORIENTED_EDGE('',*,*,#88009,.T.); +#88826 = ORIENTED_EDGE('',*,*,#88754,.F.); +#88827 = ORIENTED_EDGE('',*,*,#87883,.F.); +#88828 = CYLINDRICAL_SURFACE('',#88829,0.15); +#88829 = AXIS2_PLACEMENT_3D('',#88830,#88831,#88832); +#88830 = CARTESIAN_POINT('',(-1.11,-11.08,9.85)); +#88831 = DIRECTION('',(1.,-8.881784197001E-16,0.)); +#88832 = DIRECTION('',(0.,0.,1.)); +#88833 = ADVANCED_FACE('',(#88834),#88838,.T.); +#88834 = FACE_BOUND('',#88835,.T.); +#88835 = EDGE_LOOP('',(#88836,#88837)); +#88836 = ORIENTED_EDGE('',*,*,#88051,.F.); +#88837 = ORIENTED_EDGE('',*,*,#87977,.F.); +#88838 = PLANE('',#88839); +#88839 = AXIS2_PLACEMENT_3D('',#88840,#88841,#88842); +#88840 = CARTESIAN_POINT('',(-1.11,-2.54,1.27)); +#88841 = DIRECTION('',(-1.,1.748382715945E-16,-1.009429231697E-16)); +#88842 = DIRECTION('',(-1.748382715945E-16,-1.,-1.110223024625E-16)); +#88843 = ADVANCED_FACE('',(#88844),#88848,.T.); +#88844 = FACE_BOUND('',#88845,.T.); +#88845 = EDGE_LOOP('',(#88846,#88847)); +#88846 = ORIENTED_EDGE('',*,*,#88119,.F.); +#88847 = ORIENTED_EDGE('',*,*,#87994,.F.); +#88848 = PLANE('',#88849); +#88849 = AXIS2_PLACEMENT_3D('',#88850,#88851,#88852); +#88850 = CARTESIAN_POINT('',(-1.11,-10.21,1.27)); +#88851 = DIRECTION('',(-1.,3.49676543189E-16,8.444548485231E-29)); +#88852 = DIRECTION('',(-3.49676543189E-16,-1.,-1.110223024625E-16)); +#88853 = ADVANCED_FACE('',(#88854),#88858,.F.); +#88854 = FACE_BOUND('',#88855,.F.); +#88855 = EDGE_LOOP('',(#88856,#88857)); +#88856 = ORIENTED_EDGE('',*,*,#88076,.F.); +#88857 = ORIENTED_EDGE('',*,*,#88798,.T.); +#88858 = PLANE('',#88859); +#88859 = AXIS2_PLACEMENT_3D('',#88860,#88861,#88862); +#88860 = CARTESIAN_POINT('',(6.19,-2.54,1.27)); +#88861 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88862 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88863 = ADVANCED_FACE('',(#88864),#88868,.F.); +#88864 = FACE_BOUND('',#88865,.F.); +#88865 = EDGE_LOOP('',(#88866,#88867)); +#88866 = ORIENTED_EDGE('',*,*,#88144,.F.); +#88867 = ORIENTED_EDGE('',*,*,#88781,.T.); +#88868 = PLANE('',#88869); +#88869 = AXIS2_PLACEMENT_3D('',#88870,#88871,#88872); +#88870 = CARTESIAN_POINT('',(6.19,-10.21,1.27)); +#88871 = DIRECTION('',(-1.,-5.401060556461E-31,-8.075433853579E-16)); +#88872 = DIRECTION('',(8.075433853579E-16,5.100398068747E-47,-1.)); +#88873 = ADVANCED_FACE('',(#88874),#88880,.F.); +#88874 = FACE_BOUND('',#88875,.T.); +#88875 = EDGE_LOOP('',(#88876,#88877,#88878,#88879)); +#88876 = ORIENTED_EDGE('',*,*,#88187,.T.); +#88877 = ORIENTED_EDGE('',*,*,#88211,.T.); +#88878 = ORIENTED_EDGE('',*,*,#88235,.T.); +#88879 = ORIENTED_EDGE('',*,*,#88259,.T.); +#88880 = PLANE('',#88881); +#88881 = AXIS2_PLACEMENT_3D('',#88882,#88883,#88884); +#88882 = CARTESIAN_POINT('',(4.93,-2.79,-3.4)); +#88883 = DIRECTION('',(0.,0.,1.)); +#88884 = DIRECTION('',(1.,-3.330669073875E-16,0.)); +#88885 = ADVANCED_FACE('',(#88886),#88892,.T.); +#88886 = FACE_BOUND('',#88887,.F.); +#88887 = EDGE_LOOP('',(#88888,#88889,#88890,#88891)); +#88888 = ORIENTED_EDGE('',*,*,#88314,.T.); +#88889 = ORIENTED_EDGE('',*,*,#88283,.T.); +#88890 = ORIENTED_EDGE('',*,*,#88355,.T.); +#88891 = ORIENTED_EDGE('',*,*,#88338,.T.); +#88892 = PLANE('',#88893); +#88893 = AXIS2_PLACEMENT_3D('',#88894,#88895,#88896); +#88894 = CARTESIAN_POINT('',(0.15,-2.79,-3.4)); +#88895 = DIRECTION('',(0.,0.,-1.)); +#88896 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#88897 = ADVANCED_FACE('',(#88898),#88904,.T.); +#88898 = FACE_BOUND('',#88899,.F.); +#88899 = EDGE_LOOP('',(#88900,#88901,#88902,#88903)); +#88900 = ORIENTED_EDGE('',*,*,#88451,.T.); +#88901 = ORIENTED_EDGE('',*,*,#88434,.T.); +#88902 = ORIENTED_EDGE('',*,*,#88410,.T.); +#88903 = ORIENTED_EDGE('',*,*,#88379,.T.); +#88904 = PLANE('',#88905); +#88905 = AXIS2_PLACEMENT_3D('',#88906,#88907,#88908); +#88906 = CARTESIAN_POINT('',(0.15,-10.41,-3.4)); +#88907 = DIRECTION('',(0.,0.,-1.)); +#88908 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#88909 = ADVANCED_FACE('',(#88910),#88916,.F.); +#88910 = FACE_BOUND('',#88911,.T.); +#88911 = EDGE_LOOP('',(#88912,#88913,#88914,#88915)); +#88912 = ORIENTED_EDGE('',*,*,#88475,.T.); +#88913 = ORIENTED_EDGE('',*,*,#88499,.T.); +#88914 = ORIENTED_EDGE('',*,*,#88523,.T.); +#88915 = ORIENTED_EDGE('',*,*,#88547,.T.); +#88916 = PLANE('',#88917); +#88917 = AXIS2_PLACEMENT_3D('',#88918,#88919,#88920); +#88918 = CARTESIAN_POINT('',(5.23,-10.11,-3.4)); +#88919 = DIRECTION('',(0.,0.,1.)); +#88920 = DIRECTION('',(1.,-3.330669073875E-16,0.)); +#88921 = ADVANCED_FACE('',(#88922),#88928,.T.); +#88922 = FACE_BOUND('',#88923,.F.); +#88923 = EDGE_LOOP('',(#88924,#88925,#88926,#88927)); +#88924 = ORIENTED_EDGE('',*,*,#88626,.T.); +#88925 = ORIENTED_EDGE('',*,*,#88602,.T.); +#88926 = ORIENTED_EDGE('',*,*,#88571,.T.); +#88927 = ORIENTED_EDGE('',*,*,#88643,.T.); +#88928 = PLANE('',#88929); +#88929 = AXIS2_PLACEMENT_3D('',#88930,#88931,#88932); +#88930 = CARTESIAN_POINT('',(-0.25,0.25,-3.4)); +#88931 = DIRECTION('',(0.,-0.,-1.)); +#88932 = DIRECTION('',(-1.,3.330669073875E-16,-0.)); +#88933 = ADVANCED_FACE('',(#88934),#88940,.T.); +#88934 = FACE_BOUND('',#88935,.F.); +#88935 = EDGE_LOOP('',(#88936,#88937,#88938,#88939)); +#88936 = ORIENTED_EDGE('',*,*,#88722,.T.); +#88937 = ORIENTED_EDGE('',*,*,#88698,.T.); +#88938 = ORIENTED_EDGE('',*,*,#88667,.T.); +#88939 = ORIENTED_EDGE('',*,*,#88739,.T.); +#88940 = PLANE('',#88941); +#88941 = AXIS2_PLACEMENT_3D('',#88942,#88943,#88944); +#88942 = CARTESIAN_POINT('',(4.83,0.25,-3.4)); +#88943 = DIRECTION('',(0.,0.,-1.)); +#88944 = DIRECTION('',(-1.,3.330669073875E-16,0.)); +#88945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#88949)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#88946,#88947,#88948)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#88946 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#88947 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#88948 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#88949 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#88946, + 'distance_accuracy_value','confusion accuracy'); +#88950 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88951,#88953); +#88951 = ( REPRESENTATION_RELATIONSHIP('','',#87144,#87121) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88952) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88952 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87122); +#88953 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88954); +#88954 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('97','=>[0:1:1:45]','',#87116, + #87139,$); +#88955 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#87141)); +#88956 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88957,#88959); +#88957 = ( REPRESENTATION_RELATIONSHIP('','',#20302,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88958) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88958 = ITEM_DEFINED_TRANSFORMATION('','',#11,#319); +#88959 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88960); +#88960 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('99','J2','',#5,#20297,$); +#88961 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88962,#88964); +#88962 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88963) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88963 = ITEM_DEFINED_TRANSFORMATION('','',#11,#323); +#88964 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88965); +#88965 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('100','R56','',#5,#523,$); +#88966 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88967,#88969); +#88967 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88968) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88968 = ITEM_DEFINED_TRANSFORMATION('','',#11,#327); +#88969 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88970); +#88970 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('101','C11','',#5,#14742,$); +#88971 = SHAPE_DEFINITION_REPRESENTATION(#88972,#88978); +#88972 = PRODUCT_DEFINITION_SHAPE('','',#88973); +#88973 = PRODUCT_DEFINITION('design','',#88974,#88977); +#88974 = PRODUCT_DEFINITION_FORMATION('','',#88975); +#88975 = PRODUCT('CP_Elec_6.3x7.7','CP_Elec_6.3x7.7','',(#88976)); +#88976 = PRODUCT_CONTEXT('',#2,'mechanical'); +#88977 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#88978 = SHAPE_REPRESENTATION('',(#11,#88979),#88983); +#88979 = AXIS2_PLACEMENT_3D('',#88980,#88981,#88982); +#88980 = CARTESIAN_POINT('',(0.,0.,0.)); +#88981 = DIRECTION('',(0.,0.,1.)); +#88982 = DIRECTION('',(1.,0.,-0.)); +#88983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#88987)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#88984,#88985,#88986)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#88984 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#88985 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#88986 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#88987 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#88984, + 'distance_accuracy_value','confusion accuracy'); +#88988 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#88989,#88991); +#88989 = ( REPRESENTATION_RELATIONSHIP('','',#88978,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#88990) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#88990 = ITEM_DEFINED_TRANSFORMATION('','',#11,#331); +#88991 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #88992); +#88992 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('103','C43','',#5,#88973,$); +#88993 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#88975)); +#88994 = SHAPE_DEFINITION_REPRESENTATION(#88995,#89001); +#88995 = PRODUCT_DEFINITION_SHAPE('','',#88996); +#88996 = PRODUCT_DEFINITION('design','',#88997,#89000); +#88997 = PRODUCT_DEFINITION_FORMATION('','',#88998); +#88998 = PRODUCT('CP_Elec_63x77','CP_Elec_63x77','',(#88999)); +#88999 = PRODUCT_CONTEXT('',#2,'mechanical'); +#89000 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#89001 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#89002),#90367); +#89002 = MANIFOLD_SOLID_BREP('',#89003); +#89003 = CLOSED_SHELL('',(#89004,#89047,#89073,#89146,#89225,#89265, + #89344,#89369,#89394,#89450,#89506,#89531,#89556,#89621,#89694, + #89780,#89797,#89828,#89840,#89857,#89869,#89887,#89899,#89917, + #89929,#89960,#90012,#90044,#90069,#90094,#90126,#90151,#90176, + #90193,#90210,#90258,#90299,#90317,#90329,#90341,#90357)); +#89004 = ADVANCED_FACE('',(#89005),#89042,.T.); +#89005 = FACE_BOUND('',#89006,.T.); +#89006 = EDGE_LOOP('',(#89007,#89026,#89034,#89041)); +#89007 = ORIENTED_EDGE('',*,*,#89008,.T.); +#89008 = EDGE_CURVE('',#89009,#89009,#89011,.T.); +#89009 = VERTEX_POINT('',#89010); +#89010 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89011 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89012,#89013,#89014, + #89015,#89016,#89017,#89018,#89019,#89020,#89021,#89022,#89023, +#89024,#89025),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89012 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89013 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 1.903268122105)); +#89014 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 1.903268122105)); +#89015 = CARTESIAN_POINT('',(-0.778699260131,4.133102804313, + 1.903268122105)); +#89016 = CARTESIAN_POINT('',(1.417356467597,4.301676360907, + 1.903268122105)); +#89017 = CARTESIAN_POINT('',(3.314487228419,3.131786890306, + 1.903268122105)); +#89018 = CARTESIAN_POINT('',(4.70583335723,1.424009627085,1.903268122105 + )); +#89019 = CARTESIAN_POINT('',(4.705833357256,-1.424009627103, + 1.903268122105)); +#89020 = CARTESIAN_POINT('',(3.314487228412,-3.131786890273, + 1.903268122105)); +#89021 = CARTESIAN_POINT('',(1.41735646759,-4.301676360937, + 1.903268122105)); +#89022 = CARTESIAN_POINT('',(-0.778699260121,-4.133102804298, + 1.903268122105)); +#89023 = CARTESIAN_POINT('',(-2.374522784302,-3.035482526,1.903268122105 + )); +#89024 = CARTESIAN_POINT('',(-3.149999999999,-1.500440617323, + 1.903268122105)); +#89025 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89026 = ORIENTED_EDGE('',*,*,#89027,.F.); +#89027 = EDGE_CURVE('',#89028,#89009,#89030,.T.); +#89028 = VERTEX_POINT('',#89029); +#89029 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.07)); +#89030 = LINE('',#89031,#89032); +#89031 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,0.65)); +#89032 = VECTOR('',#89033,1.); +#89033 = DIRECTION('',(0.,0.,1.)); +#89034 = ORIENTED_EDGE('',*,*,#89035,.F.); +#89035 = EDGE_CURVE('',#89028,#89028,#89036,.T.); +#89036 = CIRCLE('',#89037,3.15); +#89037 = AXIS2_PLACEMENT_3D('',#89038,#89039,#89040); +#89038 = CARTESIAN_POINT('',(0.,0.,1.07)); +#89039 = DIRECTION('',(0.,0.,-1.)); +#89040 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89041 = ORIENTED_EDGE('',*,*,#89027,.T.); +#89042 = CYLINDRICAL_SURFACE('',#89043,3.15); +#89043 = AXIS2_PLACEMENT_3D('',#89044,#89045,#89046); +#89044 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89045 = DIRECTION('',(0.,0.,1.)); +#89046 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89047 = ADVANCED_FACE('',(#89048),#89068,.T.); +#89048 = FACE_BOUND('',#89049,.T.); +#89049 = EDGE_LOOP('',(#89050,#89051,#89060,#89067)); +#89050 = ORIENTED_EDGE('',*,*,#89035,.T.); +#89051 = ORIENTED_EDGE('',*,*,#89052,.T.); +#89052 = EDGE_CURVE('',#89028,#89053,#89055,.T.); +#89053 = VERTEX_POINT('',#89054); +#89054 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,0.65)); +#89055 = CIRCLE('',#89056,0.42); +#89056 = AXIS2_PLACEMENT_3D('',#89057,#89058,#89059); +#89057 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,1.07)); +#89058 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#89059 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89060 = ORIENTED_EDGE('',*,*,#89061,.F.); +#89061 = EDGE_CURVE('',#89053,#89053,#89062,.T.); +#89062 = CIRCLE('',#89063,2.73); +#89063 = AXIS2_PLACEMENT_3D('',#89064,#89065,#89066); +#89064 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89065 = DIRECTION('',(0.,0.,-1.)); +#89066 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89067 = ORIENTED_EDGE('',*,*,#89052,.F.); +#89068 = TOROIDAL_SURFACE('',#89069,2.73,0.42); +#89069 = AXIS2_PLACEMENT_3D('',#89070,#89071,#89072); +#89070 = CARTESIAN_POINT('',(0.,0.,1.07)); +#89071 = DIRECTION('',(0.,0.,-1.)); +#89072 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89073 = ADVANCED_FACE('',(#89074),#89103,.T.); +#89074 = FACE_BOUND('',#89075,.T.); +#89075 = EDGE_LOOP('',(#89076,#89084,#89101,#89102)); +#89076 = ORIENTED_EDGE('',*,*,#89077,.T.); +#89077 = EDGE_CURVE('',#89009,#89078,#89080,.T.); +#89078 = VERTEX_POINT('',#89079); +#89079 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89080 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#89081,#89082,#89083), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +19.792033717616),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#89081 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89082 = CARTESIAN_POINT('',(-3.15,1.195445924144E-15,1.932023556374)); +#89083 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89084 = ORIENTED_EDGE('',*,*,#89085,.T.); +#89085 = EDGE_CURVE('',#89078,#89078,#89086,.T.); +#89086 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89087,#89088,#89089, + #89090,#89091,#89092,#89093,#89094,#89095,#89096,#89097,#89098, +#89099,#89100),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89087 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89088 = CARTESIAN_POINT('',(-3.121363636365,1.486800248075, + 1.934637686762)); +#89089 = CARTESIAN_POINT('',(-2.35293621353,3.007887230305, + 1.934637686762)); +#89090 = CARTESIAN_POINT('',(-0.771620175949,4.095529142455, + 1.934637686762)); +#89091 = CARTESIAN_POINT('',(1.404471408801,4.262570212172, + 1.934637686762)); +#89092 = CARTESIAN_POINT('',(3.284355526343,3.103316100395, + 1.934637686762)); +#89093 = CARTESIAN_POINT('',(4.663053053981,1.411064085019, + 1.934637686762)); +#89094 = CARTESIAN_POINT('',(4.663053054011,-1.411064085037, + 1.934637686762)); +#89095 = CARTESIAN_POINT('',(3.284355526332,-3.103316100363, + 1.934637686762)); +#89096 = CARTESIAN_POINT('',(1.404471408797,-4.2625702122,1.934637686762 + )); +#89097 = CARTESIAN_POINT('',(-0.77162017594,-4.095529142442, + 1.934637686762)); +#89098 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 1.934637686762)); +#89099 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 1.934637686762)); +#89100 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89101 = ORIENTED_EDGE('',*,*,#89077,.F.); +#89102 = ORIENTED_EDGE('',*,*,#89008,.F.); +#89103 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#89104,#89105,#89106,#89107,#89108,#89109,#89110,#89111,#89112 + ,#89113,#89114,#89115,#89116,#89117) + ,(#89118,#89119,#89120,#89121,#89122,#89123,#89124,#89125,#89126 + ,#89127,#89128,#89129,#89130,#89131) + ,(#89132,#89133,#89134,#89135,#89136,#89137,#89138,#89139,#89140 + ,#89141,#89142,#89143,#89144,#89145 +)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,13,13 + ,1),(0.,19.792033717616),(-19.79203371761,3.914259941243E-16, + 19.792033717616,39.584067435232),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 + ,1.000000000001,1.,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945876,0.738548945875 + ,0.738548945878,0.738548945873,0.738548945879,0.738548945873 + ,0.738548945878,0.738548945875,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 +,1.000000000001,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#89104 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89105 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 1.903268122105)); +#89106 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 1.903268122105)); +#89107 = CARTESIAN_POINT('',(-0.778699260131,4.133102804313, + 1.903268122105)); +#89108 = CARTESIAN_POINT('',(1.417356467597,4.301676360907, + 1.903268122105)); +#89109 = CARTESIAN_POINT('',(3.314487228419,3.131786890306, + 1.903268122105)); +#89110 = CARTESIAN_POINT('',(4.70583335723,1.424009627085,1.903268122105 + )); +#89111 = CARTESIAN_POINT('',(4.705833357256,-1.424009627103, + 1.903268122105)); +#89112 = CARTESIAN_POINT('',(3.314487228412,-3.131786890273, + 1.903268122105)); +#89113 = CARTESIAN_POINT('',(1.41735646759,-4.301676360937, + 1.903268122105)); +#89114 = CARTESIAN_POINT('',(-0.778699260121,-4.133102804298, + 1.903268122105)); +#89115 = CARTESIAN_POINT('',(-2.374522784302,-3.035482526,1.903268122105 + )); +#89116 = CARTESIAN_POINT('',(-3.149999999999,-1.500440617323, + 1.903268122105)); +#89117 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,1.903268122105)); +#89118 = CARTESIAN_POINT('',(-3.15,1.195445924144E-15,1.932023556374)); +#89119 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 1.932023556374)); +#89120 = CARTESIAN_POINT('',(-2.374522784297,3.035482525998, + 1.932023556374)); +#89121 = CARTESIAN_POINT('',(-0.778699260131,4.133102804308, + 1.932023556374)); +#89122 = CARTESIAN_POINT('',(1.4173564676,4.301676360916,1.932023556374) + ); +#89123 = CARTESIAN_POINT('',(3.314487228412,3.131786890296, + 1.932023556374)); +#89124 = CARTESIAN_POINT('',(4.705833357241,1.424009627092, + 1.932023556374)); +#89125 = CARTESIAN_POINT('',(4.705833357246,-1.424009627104, + 1.932023556374)); +#89126 = CARTESIAN_POINT('',(3.314487228417,-3.131786890276, + 1.932023556374)); +#89127 = CARTESIAN_POINT('',(1.417356467589,-4.301676360933, + 1.932023556374)); +#89128 = CARTESIAN_POINT('',(-0.778699260122,-4.1331028043, + 1.932023556374)); +#89129 = CARTESIAN_POINT('',(-2.374522784301,-3.035482526,1.932023556374 + )); +#89130 = CARTESIAN_POINT('',(-3.15,-1.500440617323,1.932023556374)); +#89131 = CARTESIAN_POINT('',(-3.15,1.195445924144E-15,1.932023556374)); +#89132 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89133 = CARTESIAN_POINT('',(-3.121363636365,1.486800248075, + 1.934637686762)); +#89134 = CARTESIAN_POINT('',(-2.35293621353,3.007887230305, + 1.934637686762)); +#89135 = CARTESIAN_POINT('',(-0.771620175949,4.095529142455, + 1.934637686762)); +#89136 = CARTESIAN_POINT('',(1.404471408801,4.262570212172, + 1.934637686762)); +#89137 = CARTESIAN_POINT('',(3.284355526343,3.103316100395, + 1.934637686762)); +#89138 = CARTESIAN_POINT('',(4.663053053981,1.411064085019, + 1.934637686762)); +#89139 = CARTESIAN_POINT('',(4.663053054011,-1.411064085037, + 1.934637686762)); +#89140 = CARTESIAN_POINT('',(3.284355526332,-3.103316100363, + 1.934637686762)); +#89141 = CARTESIAN_POINT('',(1.404471408797,-4.2625702122,1.934637686762 + )); +#89142 = CARTESIAN_POINT('',(-0.77162017594,-4.095529142442, + 1.934637686762)); +#89143 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 1.934637686762)); +#89144 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 1.934637686762)); +#89145 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 1.934637686762)); +#89146 = ADVANCED_FACE('',(#89147,#89217),#89220,.T.); +#89147 = FACE_BOUND('',#89148,.T.); +#89148 = EDGE_LOOP('',(#89149,#89159,#89168,#89176,#89185,#89193,#89202, + #89210)); +#89149 = ORIENTED_EDGE('',*,*,#89150,.T.); +#89150 = EDGE_CURVE('',#89151,#89153,#89155,.T.); +#89151 = VERTEX_POINT('',#89152); +#89152 = CARTESIAN_POINT('',(-3.3,0.576628129734,0.65)); +#89153 = VERTEX_POINT('',#89154); +#89154 = CARTESIAN_POINT('',(-3.3,-0.576628129734,0.65)); +#89155 = LINE('',#89156,#89157); +#89156 = CARTESIAN_POINT('',(-3.3,1.15,0.65)); +#89157 = VECTOR('',#89158,1.); +#89158 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89159 = ORIENTED_EDGE('',*,*,#89160,.T.); +#89160 = EDGE_CURVE('',#89153,#89161,#89163,.T.); +#89161 = VERTEX_POINT('',#89162); +#89162 = CARTESIAN_POINT('',(-0.576628129734,-3.3,0.65)); +#89163 = CIRCLE('',#89164,3.35); +#89164 = AXIS2_PLACEMENT_3D('',#89165,#89166,#89167); +#89165 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89166 = DIRECTION('',(0.,0.,1.)); +#89167 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89168 = ORIENTED_EDGE('',*,*,#89169,.T.); +#89169 = EDGE_CURVE('',#89161,#89170,#89172,.T.); +#89170 = VERTEX_POINT('',#89171); +#89171 = CARTESIAN_POINT('',(0.576628129734,-3.3,0.65)); +#89172 = LINE('',#89173,#89174); +#89173 = CARTESIAN_POINT('',(-1.15,-3.3,0.65)); +#89174 = VECTOR('',#89175,1.); +#89175 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89176 = ORIENTED_EDGE('',*,*,#89177,.T.); +#89177 = EDGE_CURVE('',#89170,#89178,#89180,.T.); +#89178 = VERTEX_POINT('',#89179); +#89179 = CARTESIAN_POINT('',(3.3,-0.576628129734,0.65)); +#89180 = CIRCLE('',#89181,3.35); +#89181 = AXIS2_PLACEMENT_3D('',#89182,#89183,#89184); +#89182 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89183 = DIRECTION('',(0.,0.,1.)); +#89184 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89185 = ORIENTED_EDGE('',*,*,#89186,.T.); +#89186 = EDGE_CURVE('',#89178,#89187,#89189,.T.); +#89187 = VERTEX_POINT('',#89188); +#89188 = CARTESIAN_POINT('',(3.3,0.576628129734,0.65)); +#89189 = LINE('',#89190,#89191); +#89190 = CARTESIAN_POINT('',(3.3,-1.65,0.65)); +#89191 = VECTOR('',#89192,1.); +#89192 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89193 = ORIENTED_EDGE('',*,*,#89194,.T.); +#89194 = EDGE_CURVE('',#89187,#89195,#89197,.T.); +#89195 = VERTEX_POINT('',#89196); +#89196 = CARTESIAN_POINT('',(0.576628129734,3.3,0.65)); +#89197 = CIRCLE('',#89198,3.35); +#89198 = AXIS2_PLACEMENT_3D('',#89199,#89200,#89201); +#89199 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89200 = DIRECTION('',(0.,0.,1.)); +#89201 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89202 = ORIENTED_EDGE('',*,*,#89203,.T.); +#89203 = EDGE_CURVE('',#89195,#89204,#89206,.T.); +#89204 = VERTEX_POINT('',#89205); +#89205 = CARTESIAN_POINT('',(-0.576628129734,3.3,0.65)); +#89206 = LINE('',#89207,#89208); +#89207 = CARTESIAN_POINT('',(1.65,3.3,0.65)); +#89208 = VECTOR('',#89209,1.); +#89209 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89210 = ORIENTED_EDGE('',*,*,#89211,.T.); +#89211 = EDGE_CURVE('',#89204,#89151,#89212,.T.); +#89212 = CIRCLE('',#89213,3.35); +#89213 = AXIS2_PLACEMENT_3D('',#89214,#89215,#89216); +#89214 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89215 = DIRECTION('',(0.,0.,1.)); +#89216 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89217 = FACE_BOUND('',#89218,.T.); +#89218 = EDGE_LOOP('',(#89219)); +#89219 = ORIENTED_EDGE('',*,*,#89061,.T.); +#89220 = PLANE('',#89221); +#89221 = AXIS2_PLACEMENT_3D('',#89222,#89223,#89224); +#89222 = CARTESIAN_POINT('',(2.040955421701E-16,-6.734331626528E-17,0.65 + )); +#89223 = DIRECTION('',(0.,0.,1.)); +#89224 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89225 = ADVANCED_FACE('',(#89226),#89256,.F.); +#89226 = FACE_BOUND('',#89227,.F.); +#89227 = EDGE_LOOP('',(#89228,#89237,#89238,#89239)); +#89228 = ORIENTED_EDGE('',*,*,#89229,.F.); +#89229 = EDGE_CURVE('',#89078,#89230,#89232,.T.); +#89230 = VERTEX_POINT('',#89231); +#89231 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89232 = CIRCLE('',#89233,0.315); +#89233 = AXIS2_PLACEMENT_3D('',#89234,#89235,#89236); +#89234 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.248333333333)); +#89235 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#89236 = DIRECTION('',(0.,0.,-1.)); +#89237 = ORIENTED_EDGE('',*,*,#89085,.T.); +#89238 = ORIENTED_EDGE('',*,*,#89229,.T.); +#89239 = ORIENTED_EDGE('',*,*,#89240,.F.); +#89240 = EDGE_CURVE('',#89230,#89230,#89241,.T.); +#89241 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89242,#89243,#89244, + #89245,#89246,#89247,#89248,#89249,#89250,#89251,#89252,#89253, +#89254,#89255),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89242 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89243 = CARTESIAN_POINT('',(-3.121363636364,1.486800248075, + 2.562028979904)); +#89244 = CARTESIAN_POINT('',(-2.352936213531,3.007887230306, + 2.562028979904)); +#89245 = CARTESIAN_POINT('',(-0.771620175947,4.095529142455, + 2.562028979904)); +#89246 = CARTESIAN_POINT('',(1.404471408799,4.262570212172, + 2.562028979904)); +#89247 = CARTESIAN_POINT('',(3.284355526347,3.103316100394, + 2.562028979904)); +#89248 = CARTESIAN_POINT('',(4.663053053976,1.411064085019, + 2.562028979904)); +#89249 = CARTESIAN_POINT('',(4.663053054016,-1.411064085037, + 2.562028979904)); +#89250 = CARTESIAN_POINT('',(3.284355526329,-3.103316100364, + 2.562028979904)); +#89251 = CARTESIAN_POINT('',(1.404471408799,-4.262570212199, + 2.562028979904)); +#89252 = CARTESIAN_POINT('',(-0.771620175941,-4.095529142443, + 2.562028979904)); +#89253 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 2.562028979904)); +#89254 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 2.562028979904)); +#89255 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89256 = SURFACE_OF_REVOLUTION('',#89257,#89262); +#89257 = CIRCLE('',#89258,0.315); +#89258 = AXIS2_PLACEMENT_3D('',#89259,#89260,#89261); +#89259 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.248333333333)); +#89260 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#89261 = DIRECTION('',(0.,0.,-1.)); +#89262 = AXIS1_PLACEMENT('',#89263,#89264); +#89263 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89264 = DIRECTION('',(-0.,0.,-1.)); +#89265 = ADVANCED_FACE('',(#89266),#89339,.F.); +#89266 = FACE_BOUND('',#89267,.F.); +#89267 = EDGE_LOOP('',(#89268,#89278,#89286,#89294,#89300,#89301,#89309, + #89317,#89325,#89333)); +#89268 = ORIENTED_EDGE('',*,*,#89269,.F.); +#89269 = EDGE_CURVE('',#89270,#89272,#89274,.T.); +#89270 = VERTEX_POINT('',#89271); +#89271 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89272 = VERTEX_POINT('',#89273); +#89273 = CARTESIAN_POINT('',(-3.3,0.325,0.15)); +#89274 = LINE('',#89275,#89276); +#89275 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89276 = VECTOR('',#89277,1.); +#89277 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89278 = ORIENTED_EDGE('',*,*,#89279,.T.); +#89279 = EDGE_CURVE('',#89270,#89280,#89282,.T.); +#89280 = VERTEX_POINT('',#89281); +#89281 = CARTESIAN_POINT('',(-3.3,2.3,0.85)); +#89282 = LINE('',#89283,#89284); +#89283 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89284 = VECTOR('',#89285,1.); +#89285 = DIRECTION('',(0.,0.,1.)); +#89286 = ORIENTED_EDGE('',*,*,#89287,.T.); +#89287 = EDGE_CURVE('',#89280,#89288,#89290,.T.); +#89288 = VERTEX_POINT('',#89289); +#89289 = CARTESIAN_POINT('',(-3.3,0.576628129734,0.85)); +#89290 = LINE('',#89291,#89292); +#89291 = CARTESIAN_POINT('',(-3.3,3.3,0.85)); +#89292 = VECTOR('',#89293,1.); +#89293 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89294 = ORIENTED_EDGE('',*,*,#89295,.T.); +#89295 = EDGE_CURVE('',#89288,#89151,#89296,.T.); +#89296 = LINE('',#89297,#89298); +#89297 = CARTESIAN_POINT('',(-3.3,0.576628129734,0.65)); +#89298 = VECTOR('',#89299,1.); +#89299 = DIRECTION('',(0.,0.,-1.)); +#89300 = ORIENTED_EDGE('',*,*,#89150,.T.); +#89301 = ORIENTED_EDGE('',*,*,#89302,.F.); +#89302 = EDGE_CURVE('',#89303,#89153,#89305,.T.); +#89303 = VERTEX_POINT('',#89304); +#89304 = CARTESIAN_POINT('',(-3.3,-0.576628129734,0.85)); +#89305 = LINE('',#89306,#89307); +#89306 = CARTESIAN_POINT('',(-3.3,-0.576628129734,0.65)); +#89307 = VECTOR('',#89308,1.); +#89308 = DIRECTION('',(0.,0.,-1.)); +#89309 = ORIENTED_EDGE('',*,*,#89310,.T.); +#89310 = EDGE_CURVE('',#89303,#89311,#89313,.T.); +#89311 = VERTEX_POINT('',#89312); +#89312 = CARTESIAN_POINT('',(-3.3,-2.3,0.85)); +#89313 = LINE('',#89314,#89315); +#89314 = CARTESIAN_POINT('',(-3.3,3.3,0.85)); +#89315 = VECTOR('',#89316,1.); +#89316 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89317 = ORIENTED_EDGE('',*,*,#89318,.F.); +#89318 = EDGE_CURVE('',#89319,#89311,#89321,.T.); +#89319 = VERTEX_POINT('',#89320); +#89320 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89321 = LINE('',#89322,#89323); +#89322 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89323 = VECTOR('',#89324,1.); +#89324 = DIRECTION('',(0.,0.,1.)); +#89325 = ORIENTED_EDGE('',*,*,#89326,.F.); +#89326 = EDGE_CURVE('',#89327,#89319,#89329,.T.); +#89327 = VERTEX_POINT('',#89328); +#89328 = CARTESIAN_POINT('',(-3.3,-0.325,0.15)); +#89329 = LINE('',#89330,#89331); +#89330 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89331 = VECTOR('',#89332,1.); +#89332 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89333 = ORIENTED_EDGE('',*,*,#89334,.F.); +#89334 = EDGE_CURVE('',#89272,#89327,#89335,.T.); +#89335 = LINE('',#89336,#89337); +#89336 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89337 = VECTOR('',#89338,1.); +#89338 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89339 = PLANE('',#89340); +#89340 = AXIS2_PLACEMENT_3D('',#89341,#89342,#89343); +#89341 = CARTESIAN_POINT('',(-3.3,2.3,0.15)); +#89342 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89343 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89344 = ADVANCED_FACE('',(#89345),#89364,.F.); +#89345 = FACE_BOUND('',#89346,.F.); +#89346 = EDGE_LOOP('',(#89347,#89355,#89356,#89357)); +#89347 = ORIENTED_EDGE('',*,*,#89348,.T.); +#89348 = EDGE_CURVE('',#89349,#89204,#89351,.T.); +#89349 = VERTEX_POINT('',#89350); +#89350 = CARTESIAN_POINT('',(-0.576628129734,3.3,0.85)); +#89351 = LINE('',#89352,#89353); +#89352 = CARTESIAN_POINT('',(-0.576628129734,3.3,0.65)); +#89353 = VECTOR('',#89354,1.); +#89354 = DIRECTION('',(0.,0.,-1.)); +#89355 = ORIENTED_EDGE('',*,*,#89211,.T.); +#89356 = ORIENTED_EDGE('',*,*,#89295,.F.); +#89357 = ORIENTED_EDGE('',*,*,#89358,.T.); +#89358 = EDGE_CURVE('',#89288,#89349,#89359,.T.); +#89359 = CIRCLE('',#89360,3.35); +#89360 = AXIS2_PLACEMENT_3D('',#89361,#89362,#89363); +#89361 = CARTESIAN_POINT('',(0.,0.,0.85)); +#89362 = DIRECTION('',(0.,0.,-1.)); +#89363 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89364 = CYLINDRICAL_SURFACE('',#89365,3.35); +#89365 = AXIS2_PLACEMENT_3D('',#89366,#89367,#89368); +#89366 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89367 = DIRECTION('',(0.,0.,-1.)); +#89368 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89369 = ADVANCED_FACE('',(#89370),#89389,.F.); +#89370 = FACE_BOUND('',#89371,.F.); +#89371 = EDGE_LOOP('',(#89372,#89380,#89387,#89388)); +#89372 = ORIENTED_EDGE('',*,*,#89373,.F.); +#89373 = EDGE_CURVE('',#89374,#89161,#89376,.T.); +#89374 = VERTEX_POINT('',#89375); +#89375 = CARTESIAN_POINT('',(-0.576628129734,-3.3,0.85)); +#89376 = LINE('',#89377,#89378); +#89377 = CARTESIAN_POINT('',(-0.576628129734,-3.3,0.65)); +#89378 = VECTOR('',#89379,1.); +#89379 = DIRECTION('',(0.,0.,-1.)); +#89380 = ORIENTED_EDGE('',*,*,#89381,.T.); +#89381 = EDGE_CURVE('',#89374,#89303,#89382,.T.); +#89382 = CIRCLE('',#89383,3.35); +#89383 = AXIS2_PLACEMENT_3D('',#89384,#89385,#89386); +#89384 = CARTESIAN_POINT('',(0.,0.,0.85)); +#89385 = DIRECTION('',(0.,0.,-1.)); +#89386 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89387 = ORIENTED_EDGE('',*,*,#89302,.T.); +#89388 = ORIENTED_EDGE('',*,*,#89160,.T.); +#89389 = CYLINDRICAL_SURFACE('',#89390,3.35); +#89390 = AXIS2_PLACEMENT_3D('',#89391,#89392,#89393); +#89391 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89392 = DIRECTION('',(0.,0.,-1.)); +#89393 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89394 = ADVANCED_FACE('',(#89395),#89445,.F.); +#89395 = FACE_BOUND('',#89396,.F.); +#89396 = EDGE_LOOP('',(#89397,#89407,#89415,#89423,#89429,#89430,#89431, + #89439)); +#89397 = ORIENTED_EDGE('',*,*,#89398,.F.); +#89398 = EDGE_CURVE('',#89399,#89401,#89403,.T.); +#89399 = VERTEX_POINT('',#89400); +#89400 = CARTESIAN_POINT('',(2.9,3.3,0.15)); +#89401 = VERTEX_POINT('',#89402); +#89402 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89403 = LINE('',#89404,#89405); +#89404 = CARTESIAN_POINT('',(3.3,3.3,0.15)); +#89405 = VECTOR('',#89406,1.); +#89406 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89407 = ORIENTED_EDGE('',*,*,#89408,.T.); +#89408 = EDGE_CURVE('',#89399,#89409,#89411,.T.); +#89409 = VERTEX_POINT('',#89410); +#89410 = CARTESIAN_POINT('',(2.9,3.3,1.15)); +#89411 = LINE('',#89412,#89413); +#89412 = CARTESIAN_POINT('',(2.9,3.3,0.15)); +#89413 = VECTOR('',#89414,1.); +#89414 = DIRECTION('',(0.,0.,1.)); +#89415 = ORIENTED_EDGE('',*,*,#89416,.T.); +#89416 = EDGE_CURVE('',#89409,#89417,#89419,.T.); +#89417 = VERTEX_POINT('',#89418); +#89418 = CARTESIAN_POINT('',(0.576628129734,3.3,1.15)); +#89419 = LINE('',#89420,#89421); +#89420 = CARTESIAN_POINT('',(3.3,3.3,1.15)); +#89421 = VECTOR('',#89422,1.); +#89422 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89423 = ORIENTED_EDGE('',*,*,#89424,.T.); +#89424 = EDGE_CURVE('',#89417,#89195,#89425,.T.); +#89425 = LINE('',#89426,#89427); +#89426 = CARTESIAN_POINT('',(0.576628129734,3.3,0.65)); +#89427 = VECTOR('',#89428,1.); +#89428 = DIRECTION('',(0.,0.,-1.)); +#89429 = ORIENTED_EDGE('',*,*,#89203,.T.); +#89430 = ORIENTED_EDGE('',*,*,#89348,.F.); +#89431 = ORIENTED_EDGE('',*,*,#89432,.T.); +#89432 = EDGE_CURVE('',#89349,#89433,#89435,.T.); +#89433 = VERTEX_POINT('',#89434); +#89434 = CARTESIAN_POINT('',(-2.3,3.3,0.85)); +#89435 = LINE('',#89436,#89437); +#89436 = CARTESIAN_POINT('',(4.041334437186E-16,3.3,0.85)); +#89437 = VECTOR('',#89438,1.); +#89438 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89439 = ORIENTED_EDGE('',*,*,#89440,.F.); +#89440 = EDGE_CURVE('',#89401,#89433,#89441,.T.); +#89441 = LINE('',#89442,#89443); +#89442 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89443 = VECTOR('',#89444,1.); +#89444 = DIRECTION('',(0.,0.,1.)); +#89445 = PLANE('',#89446); +#89446 = AXIS2_PLACEMENT_3D('',#89447,#89448,#89449); +#89447 = CARTESIAN_POINT('',(3.3,3.3,0.15)); +#89448 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89449 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89450 = ADVANCED_FACE('',(#89451),#89501,.F.); +#89451 = FACE_BOUND('',#89452,.F.); +#89452 = EDGE_LOOP('',(#89453,#89463,#89471,#89479,#89485,#89486,#89487, + #89495)); +#89453 = ORIENTED_EDGE('',*,*,#89454,.F.); +#89454 = EDGE_CURVE('',#89455,#89457,#89459,.T.); +#89455 = VERTEX_POINT('',#89456); +#89456 = CARTESIAN_POINT('',(2.9,-3.3,0.15)); +#89457 = VERTEX_POINT('',#89458); +#89458 = CARTESIAN_POINT('',(2.9,-3.3,1.15)); +#89459 = LINE('',#89460,#89461); +#89460 = CARTESIAN_POINT('',(2.9,-3.3,0.15)); +#89461 = VECTOR('',#89462,1.); +#89462 = DIRECTION('',(0.,0.,1.)); +#89463 = ORIENTED_EDGE('',*,*,#89464,.F.); +#89464 = EDGE_CURVE('',#89465,#89455,#89467,.T.); +#89465 = VERTEX_POINT('',#89466); +#89466 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89467 = LINE('',#89468,#89469); +#89468 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89469 = VECTOR('',#89470,1.); +#89470 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89471 = ORIENTED_EDGE('',*,*,#89472,.T.); +#89472 = EDGE_CURVE('',#89465,#89473,#89475,.T.); +#89473 = VERTEX_POINT('',#89474); +#89474 = CARTESIAN_POINT('',(-2.3,-3.3,0.85)); +#89475 = LINE('',#89476,#89477); +#89476 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89477 = VECTOR('',#89478,1.); +#89478 = DIRECTION('',(0.,0.,1.)); +#89479 = ORIENTED_EDGE('',*,*,#89480,.F.); +#89480 = EDGE_CURVE('',#89374,#89473,#89481,.T.); +#89481 = LINE('',#89482,#89483); +#89482 = CARTESIAN_POINT('',(-4.041334437186E-16,-3.3,0.85)); +#89483 = VECTOR('',#89484,1.); +#89484 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89485 = ORIENTED_EDGE('',*,*,#89373,.T.); +#89486 = ORIENTED_EDGE('',*,*,#89169,.T.); +#89487 = ORIENTED_EDGE('',*,*,#89488,.F.); +#89488 = EDGE_CURVE('',#89489,#89170,#89491,.T.); +#89489 = VERTEX_POINT('',#89490); +#89490 = CARTESIAN_POINT('',(0.576628129734,-3.3,1.15)); +#89491 = LINE('',#89492,#89493); +#89492 = CARTESIAN_POINT('',(0.576628129734,-3.3,0.65)); +#89493 = VECTOR('',#89494,1.); +#89494 = DIRECTION('',(0.,0.,-1.)); +#89495 = ORIENTED_EDGE('',*,*,#89496,.T.); +#89496 = EDGE_CURVE('',#89489,#89457,#89497,.T.); +#89497 = LINE('',#89498,#89499); +#89498 = CARTESIAN_POINT('',(-2.3,-3.3,1.15)); +#89499 = VECTOR('',#89500,1.); +#89500 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89501 = PLANE('',#89502); +#89502 = AXIS2_PLACEMENT_3D('',#89503,#89504,#89505); +#89503 = CARTESIAN_POINT('',(-2.3,-3.3,0.15)); +#89504 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89505 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89506 = ADVANCED_FACE('',(#89507),#89526,.F.); +#89507 = FACE_BOUND('',#89508,.F.); +#89508 = EDGE_LOOP('',(#89509,#89518,#89524,#89525)); +#89509 = ORIENTED_EDGE('',*,*,#89510,.F.); +#89510 = EDGE_CURVE('',#89511,#89417,#89513,.T.); +#89511 = VERTEX_POINT('',#89512); +#89512 = CARTESIAN_POINT('',(3.3,0.576628129734,1.15)); +#89513 = CIRCLE('',#89514,3.35); +#89514 = AXIS2_PLACEMENT_3D('',#89515,#89516,#89517); +#89515 = CARTESIAN_POINT('',(0.,0.,1.15)); +#89516 = DIRECTION('',(0.,0.,1.)); +#89517 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89518 = ORIENTED_EDGE('',*,*,#89519,.T.); +#89519 = EDGE_CURVE('',#89511,#89187,#89520,.T.); +#89520 = LINE('',#89521,#89522); +#89521 = CARTESIAN_POINT('',(3.3,0.576628129734,0.65)); +#89522 = VECTOR('',#89523,1.); +#89523 = DIRECTION('',(0.,0.,-1.)); +#89524 = ORIENTED_EDGE('',*,*,#89194,.T.); +#89525 = ORIENTED_EDGE('',*,*,#89424,.F.); +#89526 = CYLINDRICAL_SURFACE('',#89527,3.35); +#89527 = AXIS2_PLACEMENT_3D('',#89528,#89529,#89530); +#89528 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89529 = DIRECTION('',(0.,0.,-1.)); +#89530 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89531 = ADVANCED_FACE('',(#89532),#89551,.F.); +#89532 = FACE_BOUND('',#89533,.F.); +#89533 = EDGE_LOOP('',(#89534,#89542,#89549,#89550)); +#89534 = ORIENTED_EDGE('',*,*,#89535,.F.); +#89535 = EDGE_CURVE('',#89536,#89178,#89538,.T.); +#89536 = VERTEX_POINT('',#89537); +#89537 = CARTESIAN_POINT('',(3.3,-0.576628129734,1.15)); +#89538 = LINE('',#89539,#89540); +#89539 = CARTESIAN_POINT('',(3.3,-0.576628129734,0.65)); +#89540 = VECTOR('',#89541,1.); +#89541 = DIRECTION('',(0.,0.,-1.)); +#89542 = ORIENTED_EDGE('',*,*,#89543,.F.); +#89543 = EDGE_CURVE('',#89489,#89536,#89544,.T.); +#89544 = CIRCLE('',#89545,3.35); +#89545 = AXIS2_PLACEMENT_3D('',#89546,#89547,#89548); +#89546 = CARTESIAN_POINT('',(0.,0.,1.15)); +#89547 = DIRECTION('',(0.,0.,1.)); +#89548 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89549 = ORIENTED_EDGE('',*,*,#89488,.T.); +#89550 = ORIENTED_EDGE('',*,*,#89177,.T.); +#89551 = CYLINDRICAL_SURFACE('',#89552,3.35); +#89552 = AXIS2_PLACEMENT_3D('',#89553,#89554,#89555); +#89553 = CARTESIAN_POINT('',(0.,0.,0.65)); +#89554 = DIRECTION('',(0.,0.,-1.)); +#89555 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89556 = ADVANCED_FACE('',(#89557),#89616,.F.); +#89557 = FACE_BOUND('',#89558,.F.); +#89558 = EDGE_LOOP('',(#89559,#89569,#89577,#89583,#89584,#89585,#89586, + #89594,#89602,#89610)); +#89559 = ORIENTED_EDGE('',*,*,#89560,.F.); +#89560 = EDGE_CURVE('',#89561,#89563,#89565,.T.); +#89561 = VERTEX_POINT('',#89562); +#89562 = CARTESIAN_POINT('',(3.3,-2.9,0.15)); +#89563 = VERTEX_POINT('',#89564); +#89564 = CARTESIAN_POINT('',(3.3,-0.325,0.15)); +#89565 = LINE('',#89566,#89567); +#89566 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89567 = VECTOR('',#89568,1.); +#89568 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89569 = ORIENTED_EDGE('',*,*,#89570,.T.); +#89570 = EDGE_CURVE('',#89561,#89571,#89573,.T.); +#89571 = VERTEX_POINT('',#89572); +#89572 = CARTESIAN_POINT('',(3.3,-2.9,1.15)); +#89573 = LINE('',#89574,#89575); +#89574 = CARTESIAN_POINT('',(3.3,-2.9,0.15)); +#89575 = VECTOR('',#89576,1.); +#89576 = DIRECTION('',(0.,0.,1.)); +#89577 = ORIENTED_EDGE('',*,*,#89578,.T.); +#89578 = EDGE_CURVE('',#89571,#89536,#89579,.T.); +#89579 = LINE('',#89580,#89581); +#89580 = CARTESIAN_POINT('',(3.3,-3.3,1.15)); +#89581 = VECTOR('',#89582,1.); +#89582 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89583 = ORIENTED_EDGE('',*,*,#89535,.T.); +#89584 = ORIENTED_EDGE('',*,*,#89186,.T.); +#89585 = ORIENTED_EDGE('',*,*,#89519,.F.); +#89586 = ORIENTED_EDGE('',*,*,#89587,.T.); +#89587 = EDGE_CURVE('',#89511,#89588,#89590,.T.); +#89588 = VERTEX_POINT('',#89589); +#89589 = CARTESIAN_POINT('',(3.3,2.9,1.15)); +#89590 = LINE('',#89591,#89592); +#89591 = CARTESIAN_POINT('',(3.3,-3.3,1.15)); +#89592 = VECTOR('',#89593,1.); +#89593 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89594 = ORIENTED_EDGE('',*,*,#89595,.F.); +#89595 = EDGE_CURVE('',#89596,#89588,#89598,.T.); +#89596 = VERTEX_POINT('',#89597); +#89597 = CARTESIAN_POINT('',(3.3,2.9,0.15)); +#89598 = LINE('',#89599,#89600); +#89599 = CARTESIAN_POINT('',(3.3,2.9,0.15)); +#89600 = VECTOR('',#89601,1.); +#89601 = DIRECTION('',(0.,0.,1.)); +#89602 = ORIENTED_EDGE('',*,*,#89603,.F.); +#89603 = EDGE_CURVE('',#89604,#89596,#89606,.T.); +#89604 = VERTEX_POINT('',#89605); +#89605 = CARTESIAN_POINT('',(3.3,0.325,0.15)); +#89606 = LINE('',#89607,#89608); +#89607 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89608 = VECTOR('',#89609,1.); +#89609 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89610 = ORIENTED_EDGE('',*,*,#89611,.F.); +#89611 = EDGE_CURVE('',#89563,#89604,#89612,.T.); +#89612 = LINE('',#89613,#89614); +#89613 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89614 = VECTOR('',#89615,1.); +#89615 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89616 = PLANE('',#89617); +#89617 = AXIS2_PLACEMENT_3D('',#89618,#89619,#89620); +#89618 = CARTESIAN_POINT('',(3.3,-3.3,0.15)); +#89619 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89620 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89621 = ADVANCED_FACE('',(#89622),#89651,.T.); +#89622 = FACE_BOUND('',#89623,.T.); +#89623 = EDGE_LOOP('',(#89624,#89632,#89649,#89650)); +#89624 = ORIENTED_EDGE('',*,*,#89625,.T.); +#89625 = EDGE_CURVE('',#89230,#89626,#89628,.T.); +#89626 = VERTEX_POINT('',#89627); +#89627 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89628 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#89629,#89630,#89631), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +19.792033717616),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#89629 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89630 = CARTESIAN_POINT('',(-3.15,-4.395309519645E-16,2.564643110293)); +#89631 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89632 = ORIENTED_EDGE('',*,*,#89633,.T.); +#89633 = EDGE_CURVE('',#89626,#89626,#89634,.T.); +#89634 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#89635,#89636,#89637, + #89638,#89639,#89640,#89641,#89642,#89643,#89644,#89645,#89646, +#89647,#89648),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-19.79203371761,3.914259941243E-16,19.792033717616, +39.584067435232),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999998, + 1.000000000004,0.999999999994,1.000000000007,0.999999999994, + 1.000000000005,0.999999999997,1.000000000001,1.,1.,1.)) +REPRESENTATION_ITEM('') ); +#89635 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89636 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 2.593398544562)); +#89637 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 2.593398544562)); +#89638 = CARTESIAN_POINT('',(-0.778699260131,4.133102804314, + 2.593398544562)); +#89639 = CARTESIAN_POINT('',(1.417356467596,4.301676360904, + 2.593398544562)); +#89640 = CARTESIAN_POINT('',(3.314487228421,3.131786890311, + 2.593398544561)); +#89641 = CARTESIAN_POINT('',(4.705833357228,1.424009627078, + 2.593398544562)); +#89642 = CARTESIAN_POINT('',(4.705833357259,-1.424009627096, + 2.593398544561)); +#89643 = CARTESIAN_POINT('',(3.31448722841,-3.131786890279, + 2.593398544562)); +#89644 = CARTESIAN_POINT('',(1.417356467592,-4.301676360932, + 2.593398544562)); +#89645 = CARTESIAN_POINT('',(-0.778699260122,-4.133102804301, + 2.593398544562)); +#89646 = CARTESIAN_POINT('',(-2.374522784302,-3.035482525999, + 2.593398544562)); +#89647 = CARTESIAN_POINT('',(-3.15,-1.500440617323,2.593398544562)); +#89648 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89649 = ORIENTED_EDGE('',*,*,#89625,.F.); +#89650 = ORIENTED_EDGE('',*,*,#89240,.F.); +#89651 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#89652,#89653,#89654,#89655,#89656,#89657,#89658,#89659,#89660 + ,#89661,#89662,#89663,#89664,#89665) + ,(#89666,#89667,#89668,#89669,#89670,#89671,#89672,#89673,#89674 + ,#89675,#89676,#89677,#89678,#89679) + ,(#89680,#89681,#89682,#89683,#89684,#89685,#89686,#89687,#89688 + ,#89689,#89690,#89691,#89692,#89693 +)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,13,13 + ,1),(0.,19.792033717616),(-19.79203371761,3.914259941243E-16, + 19.792033717616,39.584067435232),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 + ,1.000000000001,1.,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945876,0.738548945875 + ,0.738548945878,0.738548945873,0.738548945879,0.738548945873 + ,0.738548945878,0.738548945875,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999998,1.000000000004,0.999999999994 + ,1.000000000007,0.999999999994,1.000000000005,0.999999999997 +,1.000000000001,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#89652 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89653 = CARTESIAN_POINT('',(-3.121363636364,1.486800248075, + 2.562028979904)); +#89654 = CARTESIAN_POINT('',(-2.352936213531,3.007887230306, + 2.562028979904)); +#89655 = CARTESIAN_POINT('',(-0.771620175947,4.095529142455, + 2.562028979904)); +#89656 = CARTESIAN_POINT('',(1.404471408799,4.262570212172, + 2.562028979904)); +#89657 = CARTESIAN_POINT('',(3.284355526347,3.103316100394, + 2.562028979904)); +#89658 = CARTESIAN_POINT('',(4.663053053976,1.411064085019, + 2.562028979904)); +#89659 = CARTESIAN_POINT('',(4.663053054016,-1.411064085037, + 2.562028979904)); +#89660 = CARTESIAN_POINT('',(3.284355526329,-3.103316100364, + 2.562028979904)); +#89661 = CARTESIAN_POINT('',(1.404471408799,-4.262570212199, + 2.562028979904)); +#89662 = CARTESIAN_POINT('',(-0.771620175941,-4.095529142443, + 2.562028979904)); +#89663 = CARTESIAN_POINT('',(-2.352936213535,-3.007887230309, + 2.562028979904)); +#89664 = CARTESIAN_POINT('',(-3.121363636363,-1.486800248074, + 2.562028979904)); +#89665 = CARTESIAN_POINT('',(-3.121363636364,3.822567986248E-16, + 2.562028979904)); +#89666 = CARTESIAN_POINT('',(-3.15,-4.395309519645E-16,2.564643110293)); +#89667 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 2.564643110293)); +#89668 = CARTESIAN_POINT('',(-2.374522784295,3.035482525996, + 2.564643110293)); +#89669 = CARTESIAN_POINT('',(-0.778699260136,4.133102804312, + 2.564643110292)); +#89670 = CARTESIAN_POINT('',(1.41735646761,4.301676360909,2.564643110293 + )); +#89671 = CARTESIAN_POINT('',(3.314487228397,3.131786890306, + 2.564643110292)); +#89672 = CARTESIAN_POINT('',(4.705833357259,1.424009627081, + 2.564643110293)); +#89673 = CARTESIAN_POINT('',(4.705833357228,-1.424009627094, + 2.564643110292)); +#89674 = CARTESIAN_POINT('',(3.314487228431,-3.131786890283, + 2.564643110293)); +#89675 = CARTESIAN_POINT('',(1.41735646758,-4.301676360929, + 2.564643110292)); +#89676 = CARTESIAN_POINT('',(-0.778699260117,-4.133102804302, + 2.564643110293)); +#89677 = CARTESIAN_POINT('',(-2.374522784304,-3.035482525999, + 2.564643110293)); +#89678 = CARTESIAN_POINT('',(-3.149999999999,-1.500440617323, + 2.564643110293)); +#89679 = CARTESIAN_POINT('',(-3.15,-4.395309519645E-16,2.564643110293)); +#89680 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89681 = CARTESIAN_POINT('',(-3.150000000001,1.500440617323, + 2.593398544562)); +#89682 = CARTESIAN_POINT('',(-2.374522784297,3.035482525996, + 2.593398544562)); +#89683 = CARTESIAN_POINT('',(-0.778699260131,4.133102804314, + 2.593398544562)); +#89684 = CARTESIAN_POINT('',(1.417356467596,4.301676360904, + 2.593398544562)); +#89685 = CARTESIAN_POINT('',(3.314487228421,3.131786890311, + 2.593398544561)); +#89686 = CARTESIAN_POINT('',(4.705833357228,1.424009627078, + 2.593398544562)); +#89687 = CARTESIAN_POINT('',(4.705833357259,-1.424009627096, + 2.593398544561)); +#89688 = CARTESIAN_POINT('',(3.31448722841,-3.131786890279, + 2.593398544562)); +#89689 = CARTESIAN_POINT('',(1.417356467592,-4.301676360932, + 2.593398544562)); +#89690 = CARTESIAN_POINT('',(-0.778699260122,-4.133102804301, + 2.593398544562)); +#89691 = CARTESIAN_POINT('',(-2.374522784302,-3.035482525999, + 2.593398544562)); +#89692 = CARTESIAN_POINT('',(-3.15,-1.500440617323,2.593398544562)); +#89693 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.593398544562)); +#89694 = ADVANCED_FACE('',(#89695),#89775,.F.); +#89695 = FACE_BOUND('',#89696,.F.); +#89696 = EDGE_LOOP('',(#89697,#89704,#89705,#89713,#89722,#89728,#89729, + #89736,#89737,#89743,#89744,#89752,#89761,#89767,#89768,#89774)); +#89697 = ORIENTED_EDGE('',*,*,#89698,.F.); +#89698 = EDGE_CURVE('',#89561,#89455,#89699,.T.); +#89699 = CIRCLE('',#89700,0.4); +#89700 = AXIS2_PLACEMENT_3D('',#89701,#89702,#89703); +#89701 = CARTESIAN_POINT('',(2.9,-2.9,0.15)); +#89702 = DIRECTION('',(0.,0.,-1.)); +#89703 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89704 = ORIENTED_EDGE('',*,*,#89560,.T.); +#89705 = ORIENTED_EDGE('',*,*,#89706,.F.); +#89706 = EDGE_CURVE('',#89707,#89563,#89709,.T.); +#89707 = VERTEX_POINT('',#89708); +#89708 = CARTESIAN_POINT('',(1.225,-0.325,0.15)); +#89709 = LINE('',#89710,#89711); +#89710 = CARTESIAN_POINT('',(1.225,-0.325,0.15)); +#89711 = VECTOR('',#89712,1.); +#89712 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#89713 = ORIENTED_EDGE('',*,*,#89714,.F.); +#89714 = EDGE_CURVE('',#89715,#89707,#89717,.T.); +#89715 = VERTEX_POINT('',#89716); +#89716 = CARTESIAN_POINT('',(1.225,0.325,0.15)); +#89717 = CIRCLE('',#89718,0.325); +#89718 = AXIS2_PLACEMENT_3D('',#89719,#89720,#89721); +#89719 = CARTESIAN_POINT('',(1.225,-3.000384657911E-16,0.15)); +#89720 = DIRECTION('',(0.,-0.,1.)); +#89721 = DIRECTION('',(9.281435288296E-16,1.,0.)); +#89722 = ORIENTED_EDGE('',*,*,#89723,.F.); +#89723 = EDGE_CURVE('',#89604,#89715,#89724,.T.); +#89724 = LINE('',#89725,#89726); +#89725 = CARTESIAN_POINT('',(3.9,0.325,0.15)); +#89726 = VECTOR('',#89727,1.); +#89727 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#89728 = ORIENTED_EDGE('',*,*,#89603,.T.); +#89729 = ORIENTED_EDGE('',*,*,#89730,.F.); +#89730 = EDGE_CURVE('',#89399,#89596,#89731,.T.); +#89731 = CIRCLE('',#89732,0.4); +#89732 = AXIS2_PLACEMENT_3D('',#89733,#89734,#89735); +#89733 = CARTESIAN_POINT('',(2.9,2.9,0.15)); +#89734 = DIRECTION('',(0.,0.,-1.)); +#89735 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89736 = ORIENTED_EDGE('',*,*,#89398,.T.); +#89737 = ORIENTED_EDGE('',*,*,#89738,.T.); +#89738 = EDGE_CURVE('',#89401,#89270,#89739,.T.); +#89739 = LINE('',#89740,#89741); +#89740 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89741 = VECTOR('',#89742,1.); +#89742 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#89743 = ORIENTED_EDGE('',*,*,#89269,.T.); +#89744 = ORIENTED_EDGE('',*,*,#89745,.F.); +#89745 = EDGE_CURVE('',#89746,#89272,#89748,.T.); +#89746 = VERTEX_POINT('',#89747); +#89747 = CARTESIAN_POINT('',(-1.225,0.325,0.15)); +#89748 = LINE('',#89749,#89750); +#89749 = CARTESIAN_POINT('',(-1.225,0.325,0.15)); +#89750 = VECTOR('',#89751,1.); +#89751 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#89752 = ORIENTED_EDGE('',*,*,#89753,.F.); +#89753 = EDGE_CURVE('',#89754,#89746,#89756,.T.); +#89754 = VERTEX_POINT('',#89755); +#89755 = CARTESIAN_POINT('',(-1.225,-0.325,0.15)); +#89756 = CIRCLE('',#89757,0.325); +#89757 = AXIS2_PLACEMENT_3D('',#89758,#89759,#89760); +#89758 = CARTESIAN_POINT('',(-1.225,1.500192328956E-16,0.15)); +#89759 = DIRECTION('',(0.,0.,1.)); +#89760 = DIRECTION('',(-8.056788489148E-16,-1.,0.)); +#89761 = ORIENTED_EDGE('',*,*,#89762,.F.); +#89762 = EDGE_CURVE('',#89327,#89754,#89763,.T.); +#89763 = LINE('',#89764,#89765); +#89764 = CARTESIAN_POINT('',(-3.9,-0.325,0.15)); +#89765 = VECTOR('',#89766,1.); +#89766 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89767 = ORIENTED_EDGE('',*,*,#89326,.T.); +#89768 = ORIENTED_EDGE('',*,*,#89769,.T.); +#89769 = EDGE_CURVE('',#89319,#89465,#89770,.T.); +#89770 = LINE('',#89771,#89772); +#89771 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89772 = VECTOR('',#89773,1.); +#89773 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89774 = ORIENTED_EDGE('',*,*,#89464,.T.); +#89775 = PLANE('',#89776); +#89776 = AXIS2_PLACEMENT_3D('',#89777,#89778,#89779); +#89777 = CARTESIAN_POINT('',(0.169665910187,-2.077808138351E-17,0.15)); +#89778 = DIRECTION('',(0.,0.,1.)); +#89779 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89780 = ADVANCED_FACE('',(#89781),#89792,.F.); +#89781 = FACE_BOUND('',#89782,.F.); +#89782 = EDGE_LOOP('',(#89783,#89784,#89785,#89791)); +#89783 = ORIENTED_EDGE('',*,*,#89738,.F.); +#89784 = ORIENTED_EDGE('',*,*,#89440,.T.); +#89785 = ORIENTED_EDGE('',*,*,#89786,.T.); +#89786 = EDGE_CURVE('',#89433,#89280,#89787,.T.); +#89787 = LINE('',#89788,#89789); +#89788 = CARTESIAN_POINT('',(-1.725,3.875,0.85)); +#89789 = VECTOR('',#89790,1.); +#89790 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#89791 = ORIENTED_EDGE('',*,*,#89279,.F.); +#89792 = PLANE('',#89793); +#89793 = AXIS2_PLACEMENT_3D('',#89794,#89795,#89796); +#89794 = CARTESIAN_POINT('',(-2.3,3.3,0.15)); +#89795 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89796 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#89797 = ADVANCED_FACE('',(#89798),#89823,.T.); +#89798 = FACE_BOUND('',#89799,.T.); +#89799 = EDGE_LOOP('',(#89800,#89808,#89816,#89822)); +#89800 = ORIENTED_EDGE('',*,*,#89801,.T.); +#89801 = EDGE_CURVE('',#89272,#89802,#89804,.T.); +#89802 = VERTEX_POINT('',#89803); +#89803 = CARTESIAN_POINT('',(-3.9,0.325,0.15)); +#89804 = LINE('',#89805,#89806); +#89805 = CARTESIAN_POINT('',(-1.225,0.325,0.15)); +#89806 = VECTOR('',#89807,1.); +#89807 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#89808 = ORIENTED_EDGE('',*,*,#89809,.T.); +#89809 = EDGE_CURVE('',#89802,#89810,#89812,.T.); +#89810 = VERTEX_POINT('',#89811); +#89811 = CARTESIAN_POINT('',(-3.9,-0.325,0.15)); +#89812 = LINE('',#89813,#89814); +#89813 = CARTESIAN_POINT('',(-3.9,0.325,0.15)); +#89814 = VECTOR('',#89815,1.); +#89815 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#89816 = ORIENTED_EDGE('',*,*,#89817,.T.); +#89817 = EDGE_CURVE('',#89810,#89327,#89818,.T.); +#89818 = LINE('',#89819,#89820); +#89819 = CARTESIAN_POINT('',(-3.9,-0.325,0.15)); +#89820 = VECTOR('',#89821,1.); +#89821 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89822 = ORIENTED_EDGE('',*,*,#89334,.F.); +#89823 = PLANE('',#89824); +#89824 = AXIS2_PLACEMENT_3D('',#89825,#89826,#89827); +#89825 = CARTESIAN_POINT('',(-2.47395012666,2.870543344061E-16,0.15)); +#89826 = DIRECTION('',(0.,0.,1.)); +#89827 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89828 = ADVANCED_FACE('',(#89829),#89835,.T.); +#89829 = FACE_BOUND('',#89830,.T.); +#89830 = EDGE_LOOP('',(#89831,#89832,#89833,#89834)); +#89831 = ORIENTED_EDGE('',*,*,#89358,.T.); +#89832 = ORIENTED_EDGE('',*,*,#89432,.T.); +#89833 = ORIENTED_EDGE('',*,*,#89786,.T.); +#89834 = ORIENTED_EDGE('',*,*,#89287,.T.); +#89835 = PLANE('',#89836); +#89836 = AXIS2_PLACEMENT_3D('',#89837,#89838,#89839); +#89837 = CARTESIAN_POINT('',(4.041334437186E-16,3.3,0.85)); +#89838 = DIRECTION('',(0.,0.,1.)); +#89839 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89840 = ADVANCED_FACE('',(#89841),#89852,.F.); +#89841 = FACE_BOUND('',#89842,.F.); +#89842 = EDGE_LOOP('',(#89843,#89844,#89845,#89851)); +#89843 = ORIENTED_EDGE('',*,*,#89769,.F.); +#89844 = ORIENTED_EDGE('',*,*,#89318,.T.); +#89845 = ORIENTED_EDGE('',*,*,#89846,.T.); +#89846 = EDGE_CURVE('',#89311,#89473,#89847,.T.); +#89847 = LINE('',#89848,#89849); +#89848 = CARTESIAN_POINT('',(-3.875,-1.725,0.85)); +#89849 = VECTOR('',#89850,1.); +#89850 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89851 = ORIENTED_EDGE('',*,*,#89472,.F.); +#89852 = PLANE('',#89853); +#89853 = AXIS2_PLACEMENT_3D('',#89854,#89855,#89856); +#89854 = CARTESIAN_POINT('',(-3.3,-2.3,0.15)); +#89855 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#89856 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#89857 = ADVANCED_FACE('',(#89858),#89864,.T.); +#89858 = FACE_BOUND('',#89859,.T.); +#89859 = EDGE_LOOP('',(#89860,#89861,#89862,#89863)); +#89860 = ORIENTED_EDGE('',*,*,#89480,.F.); +#89861 = ORIENTED_EDGE('',*,*,#89381,.T.); +#89862 = ORIENTED_EDGE('',*,*,#89310,.T.); +#89863 = ORIENTED_EDGE('',*,*,#89846,.T.); +#89864 = PLANE('',#89865); +#89865 = AXIS2_PLACEMENT_3D('',#89866,#89867,#89868); +#89866 = CARTESIAN_POINT('',(4.041334437186E-16,3.3,0.85)); +#89867 = DIRECTION('',(0.,0.,1.)); +#89868 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89869 = ADVANCED_FACE('',(#89870),#89882,.T.); +#89870 = FACE_BOUND('',#89871,.T.); +#89871 = EDGE_LOOP('',(#89872,#89873,#89874,#89881)); +#89872 = ORIENTED_EDGE('',*,*,#89510,.F.); +#89873 = ORIENTED_EDGE('',*,*,#89587,.T.); +#89874 = ORIENTED_EDGE('',*,*,#89875,.F.); +#89875 = EDGE_CURVE('',#89409,#89588,#89876,.T.); +#89876 = CIRCLE('',#89877,0.4); +#89877 = AXIS2_PLACEMENT_3D('',#89878,#89879,#89880); +#89878 = CARTESIAN_POINT('',(2.9,2.9,1.15)); +#89879 = DIRECTION('',(0.,0.,-1.)); +#89880 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89881 = ORIENTED_EDGE('',*,*,#89416,.T.); +#89882 = PLANE('',#89883); +#89883 = AXIS2_PLACEMENT_3D('',#89884,#89885,#89886); +#89884 = CARTESIAN_POINT('',(0.169665910187,-2.077808138351E-17,1.15)); +#89885 = DIRECTION('',(0.,0.,1.)); +#89886 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89887 = ADVANCED_FACE('',(#89888),#89894,.T.); +#89888 = FACE_BOUND('',#89889,.T.); +#89889 = EDGE_LOOP('',(#89890,#89891,#89892,#89893)); +#89890 = ORIENTED_EDGE('',*,*,#89408,.T.); +#89891 = ORIENTED_EDGE('',*,*,#89875,.T.); +#89892 = ORIENTED_EDGE('',*,*,#89595,.F.); +#89893 = ORIENTED_EDGE('',*,*,#89730,.F.); +#89894 = CYLINDRICAL_SURFACE('',#89895,0.4); +#89895 = AXIS2_PLACEMENT_3D('',#89896,#89897,#89898); +#89896 = CARTESIAN_POINT('',(2.9,2.9,0.15)); +#89897 = DIRECTION('',(0.,0.,1.)); +#89898 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#89899 = ADVANCED_FACE('',(#89900),#89912,.T.); +#89900 = FACE_BOUND('',#89901,.T.); +#89901 = EDGE_LOOP('',(#89902,#89903,#89910,#89911)); +#89902 = ORIENTED_EDGE('',*,*,#89570,.T.); +#89903 = ORIENTED_EDGE('',*,*,#89904,.T.); +#89904 = EDGE_CURVE('',#89571,#89457,#89905,.T.); +#89905 = CIRCLE('',#89906,0.4); +#89906 = AXIS2_PLACEMENT_3D('',#89907,#89908,#89909); +#89907 = CARTESIAN_POINT('',(2.9,-2.9,1.15)); +#89908 = DIRECTION('',(0.,0.,-1.)); +#89909 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#89910 = ORIENTED_EDGE('',*,*,#89454,.F.); +#89911 = ORIENTED_EDGE('',*,*,#89698,.F.); +#89912 = CYLINDRICAL_SURFACE('',#89913,0.4); +#89913 = AXIS2_PLACEMENT_3D('',#89914,#89915,#89916); +#89914 = CARTESIAN_POINT('',(2.9,-2.9,0.15)); +#89915 = DIRECTION('',(0.,0.,1.)); +#89916 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#89917 = ADVANCED_FACE('',(#89918),#89924,.T.); +#89918 = FACE_BOUND('',#89919,.T.); +#89919 = EDGE_LOOP('',(#89920,#89921,#89922,#89923)); +#89920 = ORIENTED_EDGE('',*,*,#89904,.F.); +#89921 = ORIENTED_EDGE('',*,*,#89578,.T.); +#89922 = ORIENTED_EDGE('',*,*,#89543,.F.); +#89923 = ORIENTED_EDGE('',*,*,#89496,.T.); +#89924 = PLANE('',#89925); +#89925 = AXIS2_PLACEMENT_3D('',#89926,#89927,#89928); +#89926 = CARTESIAN_POINT('',(0.169665910187,-2.077808138351E-17,1.15)); +#89927 = DIRECTION('',(0.,0.,1.)); +#89928 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89929 = ADVANCED_FACE('',(#89930),#89955,.T.); +#89930 = FACE_BOUND('',#89931,.T.); +#89931 = EDGE_LOOP('',(#89932,#89940,#89948,#89954)); +#89932 = ORIENTED_EDGE('',*,*,#89933,.T.); +#89933 = EDGE_CURVE('',#89563,#89934,#89936,.T.); +#89934 = VERTEX_POINT('',#89935); +#89935 = CARTESIAN_POINT('',(3.9,-0.325,0.15)); +#89936 = LINE('',#89937,#89938); +#89937 = CARTESIAN_POINT('',(1.225,-0.325,0.15)); +#89938 = VECTOR('',#89939,1.); +#89939 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#89940 = ORIENTED_EDGE('',*,*,#89941,.T.); +#89941 = EDGE_CURVE('',#89934,#89942,#89944,.T.); +#89942 = VERTEX_POINT('',#89943); +#89943 = CARTESIAN_POINT('',(3.9,0.325,0.15)); +#89944 = LINE('',#89945,#89946); +#89945 = CARTESIAN_POINT('',(3.9,-0.325,0.15)); +#89946 = VECTOR('',#89947,1.); +#89947 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#89948 = ORIENTED_EDGE('',*,*,#89949,.T.); +#89949 = EDGE_CURVE('',#89942,#89604,#89950,.T.); +#89950 = LINE('',#89951,#89952); +#89951 = CARTESIAN_POINT('',(3.9,0.325,0.15)); +#89952 = VECTOR('',#89953,1.); +#89953 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#89954 = ORIENTED_EDGE('',*,*,#89611,.F.); +#89955 = PLANE('',#89956); +#89956 = AXIS2_PLACEMENT_3D('',#89957,#89958,#89959); +#89957 = CARTESIAN_POINT('',(2.47395012666,-5.900258447925E-16,0.15)); +#89958 = DIRECTION('',(0.,0.,1.)); +#89959 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#89960 = ADVANCED_FACE('',(#89961),#90007,.T.); +#89961 = FACE_BOUND('',#89962,.T.); +#89962 = EDGE_LOOP('',(#89963,#89964,#89972,#89981,#89990,#89999,#90006) + ); +#89963 = ORIENTED_EDGE('',*,*,#89633,.F.); +#89964 = ORIENTED_EDGE('',*,*,#89965,.T.); +#89965 = EDGE_CURVE('',#89626,#89966,#89968,.T.); +#89966 = VERTEX_POINT('',#89967); +#89967 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,7.28)); +#89968 = LINE('',#89969,#89970); +#89969 = CARTESIAN_POINT('',(-3.15,3.857637417314E-16,2.563333333333)); +#89970 = VECTOR('',#89971,1.); +#89971 = DIRECTION('',(0.,0.,1.)); +#89972 = ORIENTED_EDGE('',*,*,#89973,.T.); +#89973 = EDGE_CURVE('',#89966,#89974,#89976,.T.); +#89974 = VERTEX_POINT('',#89975); +#89975 = CARTESIAN_POINT('',(0.945,3.004908484463,7.28)); +#89976 = CIRCLE('',#89977,3.15); +#89977 = AXIS2_PLACEMENT_3D('',#89978,#89979,#89980); +#89978 = CARTESIAN_POINT('',(0.,0.,7.28)); +#89979 = DIRECTION('',(0.,0.,-1.)); +#89980 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89981 = ORIENTED_EDGE('',*,*,#89982,.T.); +#89982 = EDGE_CURVE('',#89974,#89983,#89985,.T.); +#89983 = VERTEX_POINT('',#89984); +#89984 = CARTESIAN_POINT('',(3.15,3.20055036432E-08,7.28)); +#89985 = CIRCLE('',#89986,3.15); +#89986 = AXIS2_PLACEMENT_3D('',#89987,#89988,#89989); +#89987 = CARTESIAN_POINT('',(0.,0.,7.28)); +#89988 = DIRECTION('',(0.,0.,-1.)); +#89989 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89990 = ORIENTED_EDGE('',*,*,#89991,.T.); +#89991 = EDGE_CURVE('',#89983,#89992,#89994,.T.); +#89992 = VERTEX_POINT('',#89993); +#89993 = CARTESIAN_POINT('',(0.945,-3.004908484463,7.28)); +#89994 = CIRCLE('',#89995,3.15); +#89995 = AXIS2_PLACEMENT_3D('',#89996,#89997,#89998); +#89996 = CARTESIAN_POINT('',(0.,0.,7.28)); +#89997 = DIRECTION('',(0.,0.,-1.)); +#89998 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#89999 = ORIENTED_EDGE('',*,*,#90000,.T.); +#90000 = EDGE_CURVE('',#89992,#89966,#90001,.T.); +#90001 = CIRCLE('',#90002,3.15); +#90002 = AXIS2_PLACEMENT_3D('',#90003,#90004,#90005); +#90003 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90004 = DIRECTION('',(0.,0.,-1.)); +#90005 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90006 = ORIENTED_EDGE('',*,*,#89965,.F.); +#90007 = CYLINDRICAL_SURFACE('',#90008,3.15); +#90008 = AXIS2_PLACEMENT_3D('',#90009,#90010,#90011); +#90009 = CARTESIAN_POINT('',(0.,0.,2.563333333333)); +#90010 = DIRECTION('',(0.,0.,1.)); +#90011 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90012 = ADVANCED_FACE('',(#90013),#90039,.F.); +#90013 = FACE_BOUND('',#90014,.F.); +#90014 = EDGE_LOOP('',(#90015,#90023,#90024,#90025,#90033)); +#90015 = ORIENTED_EDGE('',*,*,#90016,.T.); +#90016 = EDGE_CURVE('',#90017,#89810,#90019,.T.); +#90017 = VERTEX_POINT('',#90018); +#90018 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90019 = LINE('',#90020,#90021); +#90020 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90021 = VECTOR('',#90022,1.); +#90022 = DIRECTION('',(0.,0.,1.)); +#90023 = ORIENTED_EDGE('',*,*,#89817,.T.); +#90024 = ORIENTED_EDGE('',*,*,#89762,.T.); +#90025 = ORIENTED_EDGE('',*,*,#90026,.F.); +#90026 = EDGE_CURVE('',#90027,#89754,#90029,.T.); +#90027 = VERTEX_POINT('',#90028); +#90028 = CARTESIAN_POINT('',(-1.225,-0.325,0.)); +#90029 = LINE('',#90030,#90031); +#90030 = CARTESIAN_POINT('',(-1.225,-0.325,0.)); +#90031 = VECTOR('',#90032,1.); +#90032 = DIRECTION('',(0.,0.,1.)); +#90033 = ORIENTED_EDGE('',*,*,#90034,.F.); +#90034 = EDGE_CURVE('',#90017,#90027,#90035,.T.); +#90035 = LINE('',#90036,#90037); +#90036 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90037 = VECTOR('',#90038,1.); +#90038 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#90039 = PLANE('',#90040); +#90040 = AXIS2_PLACEMENT_3D('',#90041,#90042,#90043); +#90041 = CARTESIAN_POINT('',(-3.9,-0.325,0.)); +#90042 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#90043 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#90044 = ADVANCED_FACE('',(#90045),#90064,.T.); +#90045 = FACE_BOUND('',#90046,.T.); +#90046 = EDGE_LOOP('',(#90047,#90056,#90062,#90063)); +#90047 = ORIENTED_EDGE('',*,*,#90048,.T.); +#90048 = EDGE_CURVE('',#90027,#90049,#90051,.T.); +#90049 = VERTEX_POINT('',#90050); +#90050 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90051 = CIRCLE('',#90052,0.325); +#90052 = AXIS2_PLACEMENT_3D('',#90053,#90054,#90055); +#90053 = CARTESIAN_POINT('',(-1.225,1.500192328956E-16,0.)); +#90054 = DIRECTION('',(0.,0.,1.)); +#90055 = DIRECTION('',(-8.056788489148E-16,-1.,0.)); +#90056 = ORIENTED_EDGE('',*,*,#90057,.T.); +#90057 = EDGE_CURVE('',#90049,#89746,#90058,.T.); +#90058 = LINE('',#90059,#90060); +#90059 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90060 = VECTOR('',#90061,1.); +#90061 = DIRECTION('',(0.,0.,1.)); +#90062 = ORIENTED_EDGE('',*,*,#89753,.F.); +#90063 = ORIENTED_EDGE('',*,*,#90026,.F.); +#90064 = CYLINDRICAL_SURFACE('',#90065,0.325); +#90065 = AXIS2_PLACEMENT_3D('',#90066,#90067,#90068); +#90066 = CARTESIAN_POINT('',(-1.225,1.500192328956E-16,0.)); +#90067 = DIRECTION('',(0.,0.,-1.)); +#90068 = DIRECTION('',(-8.056788489148E-16,-1.,-0.)); +#90069 = ADVANCED_FACE('',(#90070),#90089,.F.); +#90070 = FACE_BOUND('',#90071,.F.); +#90071 = EDGE_LOOP('',(#90072,#90073,#90074,#90075,#90083)); +#90072 = ORIENTED_EDGE('',*,*,#90057,.T.); +#90073 = ORIENTED_EDGE('',*,*,#89745,.T.); +#90074 = ORIENTED_EDGE('',*,*,#89801,.T.); +#90075 = ORIENTED_EDGE('',*,*,#90076,.F.); +#90076 = EDGE_CURVE('',#90077,#89802,#90079,.T.); +#90077 = VERTEX_POINT('',#90078); +#90078 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90079 = LINE('',#90080,#90081); +#90080 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90081 = VECTOR('',#90082,1.); +#90082 = DIRECTION('',(0.,0.,1.)); +#90083 = ORIENTED_EDGE('',*,*,#90084,.F.); +#90084 = EDGE_CURVE('',#90049,#90077,#90085,.T.); +#90085 = LINE('',#90086,#90087); +#90086 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90087 = VECTOR('',#90088,1.); +#90088 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#90089 = PLANE('',#90090); +#90090 = AXIS2_PLACEMENT_3D('',#90091,#90092,#90093); +#90091 = CARTESIAN_POINT('',(-1.225,0.325,0.)); +#90092 = DIRECTION('',(-1.432165121507E-16,-1.,0.)); +#90093 = DIRECTION('',(-1.,1.432165121507E-16,0.)); +#90094 = ADVANCED_FACE('',(#90095),#90121,.F.); +#90095 = FACE_BOUND('',#90096,.F.); +#90096 = EDGE_LOOP('',(#90097,#90105,#90106,#90107,#90115)); +#90097 = ORIENTED_EDGE('',*,*,#90098,.T.); +#90098 = EDGE_CURVE('',#90099,#89942,#90101,.T.); +#90099 = VERTEX_POINT('',#90100); +#90100 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90101 = LINE('',#90102,#90103); +#90102 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90103 = VECTOR('',#90104,1.); +#90104 = DIRECTION('',(0.,0.,1.)); +#90105 = ORIENTED_EDGE('',*,*,#89949,.T.); +#90106 = ORIENTED_EDGE('',*,*,#89723,.T.); +#90107 = ORIENTED_EDGE('',*,*,#90108,.F.); +#90108 = EDGE_CURVE('',#90109,#89715,#90111,.T.); +#90109 = VERTEX_POINT('',#90110); +#90110 = CARTESIAN_POINT('',(1.225,0.325,0.)); +#90111 = LINE('',#90112,#90113); +#90112 = CARTESIAN_POINT('',(1.225,0.325,0.)); +#90113 = VECTOR('',#90114,1.); +#90114 = DIRECTION('',(0.,0.,1.)); +#90115 = ORIENTED_EDGE('',*,*,#90116,.F.); +#90116 = EDGE_CURVE('',#90099,#90109,#90117,.T.); +#90117 = LINE('',#90118,#90119); +#90118 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90119 = VECTOR('',#90120,1.); +#90120 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#90121 = PLANE('',#90122); +#90122 = AXIS2_PLACEMENT_3D('',#90123,#90124,#90125); +#90123 = CARTESIAN_POINT('',(3.9,0.325,0.)); +#90124 = DIRECTION('',(-2.449293598295E-16,-1.,0.)); +#90125 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#90126 = ADVANCED_FACE('',(#90127),#90146,.T.); +#90127 = FACE_BOUND('',#90128,.T.); +#90128 = EDGE_LOOP('',(#90129,#90138,#90144,#90145)); +#90129 = ORIENTED_EDGE('',*,*,#90130,.T.); +#90130 = EDGE_CURVE('',#90109,#90131,#90133,.T.); +#90131 = VERTEX_POINT('',#90132); +#90132 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90133 = CIRCLE('',#90134,0.325); +#90134 = AXIS2_PLACEMENT_3D('',#90135,#90136,#90137); +#90135 = CARTESIAN_POINT('',(1.225,-3.000384657911E-16,0.)); +#90136 = DIRECTION('',(0.,-0.,1.)); +#90137 = DIRECTION('',(9.281435288296E-16,1.,0.)); +#90138 = ORIENTED_EDGE('',*,*,#90139,.T.); +#90139 = EDGE_CURVE('',#90131,#89707,#90140,.T.); +#90140 = LINE('',#90141,#90142); +#90141 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90142 = VECTOR('',#90143,1.); +#90143 = DIRECTION('',(0.,0.,1.)); +#90144 = ORIENTED_EDGE('',*,*,#89714,.F.); +#90145 = ORIENTED_EDGE('',*,*,#90108,.F.); +#90146 = CYLINDRICAL_SURFACE('',#90147,0.325); +#90147 = AXIS2_PLACEMENT_3D('',#90148,#90149,#90150); +#90148 = CARTESIAN_POINT('',(1.225,-3.000384657911E-16,0.)); +#90149 = DIRECTION('',(-0.,0.,-1.)); +#90150 = DIRECTION('',(9.281435288296E-16,1.,0.)); +#90151 = ADVANCED_FACE('',(#90152),#90171,.F.); +#90152 = FACE_BOUND('',#90153,.F.); +#90153 = EDGE_LOOP('',(#90154,#90155,#90156,#90157,#90165)); +#90154 = ORIENTED_EDGE('',*,*,#90139,.T.); +#90155 = ORIENTED_EDGE('',*,*,#89706,.T.); +#90156 = ORIENTED_EDGE('',*,*,#89933,.T.); +#90157 = ORIENTED_EDGE('',*,*,#90158,.F.); +#90158 = EDGE_CURVE('',#90159,#89934,#90161,.T.); +#90159 = VERTEX_POINT('',#90160); +#90160 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90161 = LINE('',#90162,#90163); +#90162 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90163 = VECTOR('',#90164,1.); +#90164 = DIRECTION('',(0.,0.,1.)); +#90165 = ORIENTED_EDGE('',*,*,#90166,.F.); +#90166 = EDGE_CURVE('',#90131,#90159,#90167,.T.); +#90167 = LINE('',#90168,#90169); +#90168 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90169 = VECTOR('',#90170,1.); +#90170 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#90171 = PLANE('',#90172); +#90172 = AXIS2_PLACEMENT_3D('',#90173,#90174,#90175); +#90173 = CARTESIAN_POINT('',(1.225,-0.325,0.)); +#90174 = DIRECTION('',(2.656811920655E-16,1.,0.)); +#90175 = DIRECTION('',(1.,-2.656811920655E-16,0.)); +#90176 = ADVANCED_FACE('',(#90177),#90188,.F.); +#90177 = FACE_BOUND('',#90178,.F.); +#90178 = EDGE_LOOP('',(#90179,#90180,#90181,#90182)); +#90179 = ORIENTED_EDGE('',*,*,#90076,.T.); +#90180 = ORIENTED_EDGE('',*,*,#89809,.T.); +#90181 = ORIENTED_EDGE('',*,*,#90016,.F.); +#90182 = ORIENTED_EDGE('',*,*,#90183,.F.); +#90183 = EDGE_CURVE('',#90077,#90017,#90184,.T.); +#90184 = LINE('',#90185,#90186); +#90185 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90186 = VECTOR('',#90187,1.); +#90187 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#90188 = PLANE('',#90189); +#90189 = AXIS2_PLACEMENT_3D('',#90190,#90191,#90192); +#90190 = CARTESIAN_POINT('',(-3.9,0.325,0.)); +#90191 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#90192 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#90193 = ADVANCED_FACE('',(#90194),#90205,.F.); +#90194 = FACE_BOUND('',#90195,.F.); +#90195 = EDGE_LOOP('',(#90196,#90197,#90198,#90199)); +#90196 = ORIENTED_EDGE('',*,*,#90158,.T.); +#90197 = ORIENTED_EDGE('',*,*,#89941,.T.); +#90198 = ORIENTED_EDGE('',*,*,#90098,.F.); +#90199 = ORIENTED_EDGE('',*,*,#90200,.F.); +#90200 = EDGE_CURVE('',#90159,#90099,#90201,.T.); +#90201 = LINE('',#90202,#90203); +#90202 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90203 = VECTOR('',#90204,1.); +#90204 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#90205 = PLANE('',#90206); +#90206 = AXIS2_PLACEMENT_3D('',#90207,#90208,#90209); +#90207 = CARTESIAN_POINT('',(3.9,-0.325,0.)); +#90208 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#90209 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#90210 = ADVANCED_FACE('',(#90211),#90253,.T.); +#90211 = FACE_BOUND('',#90212,.T.); +#90212 = EDGE_LOOP('',(#90213,#90224,#90245,#90246)); +#90213 = ORIENTED_EDGE('',*,*,#90214,.T.); +#90214 = EDGE_CURVE('',#90215,#90217,#90219,.T.); +#90215 = VERTEX_POINT('',#90216); +#90216 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,7.7)); +#90217 = VERTEX_POINT('',#90218); +#90218 = CARTESIAN_POINT('',(0.945,2.561225292707,7.7)); +#90219 = CIRCLE('',#90220,2.73); +#90220 = AXIS2_PLACEMENT_3D('',#90221,#90222,#90223); +#90221 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90222 = DIRECTION('',(0.,0.,-1.)); +#90223 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90224 = ORIENTED_EDGE('',*,*,#90225,.F.); +#90225 = EDGE_CURVE('',#89974,#90217,#90226,.T.); +#90226 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#90227,#90228,#90229,#90230, + #90231,#90232,#90233,#90234,#90235,#90236,#90237,#90238,#90239, + #90240,#90241,#90242,#90243,#90244),.UNSPECIFIED.,.F.,.F.,(6,4,4,4,6 + ),(0.,0.249577466955,0.497599275591,0.74730978514,1.), + .UNSPECIFIED.); +#90227 = CARTESIAN_POINT('',(0.945,3.004908484463,7.28)); +#90228 = CARTESIAN_POINT('',(0.945,3.00490848098,7.313228015972)); +#90229 = CARTESIAN_POINT('',(0.945,3.001463821946,7.346456730622)); +#90230 = CARTESIAN_POINT('',(0.945,2.994574119979,7.379237505919)); +#90231 = CARTESIAN_POINT('',(0.945,2.984338296282,7.411126992482)); +#90232 = CARTESIAN_POINT('',(0.945,2.957631160106,7.472127049006)); +#90233 = CARTESIAN_POINT('',(0.945,2.941198599864,7.501254840031)); +#90234 = CARTESIAN_POINT('',(0.945,2.921827872491,7.528710244247)); +#90235 = CARTESIAN_POINT('',(0.945,2.899782785018,7.554145479611)); +#90236 = CARTESIAN_POINT('',(0.945,2.850815155175,7.600572655349)); +#90237 = CARTESIAN_POINT('',(0.945,2.823859719074,7.62153380299)); +#90238 = CARTESIAN_POINT('',(0.945,2.794840653888,7.63987747649)); +#90239 = CARTESIAN_POINT('',(0.945,2.764133571656,7.655390822856)); +#90240 = CARTESIAN_POINT('',(0.945,2.699757531029,7.680632446489)); +#90241 = CARTESIAN_POINT('',(0.945,2.666057065744,7.690289667083)); +#90242 = CARTESIAN_POINT('',(0.945,2.631447275386,7.696766294835)); +#90243 = CARTESIAN_POINT('',(0.945,2.596359892027,7.699999996714)); +#90244 = CARTESIAN_POINT('',(0.945,2.561225292707,7.7)); +#90245 = ORIENTED_EDGE('',*,*,#89973,.F.); +#90246 = ORIENTED_EDGE('',*,*,#90247,.T.); +#90247 = EDGE_CURVE('',#89966,#90215,#90248,.T.); +#90248 = CIRCLE('',#90249,0.42); +#90249 = AXIS2_PLACEMENT_3D('',#90250,#90251,#90252); +#90250 = CARTESIAN_POINT('',(-2.73,3.343285761672E-16,7.28)); +#90251 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#90252 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90253 = TOROIDAL_SURFACE('',#90254,2.73,0.42); +#90254 = AXIS2_PLACEMENT_3D('',#90255,#90256,#90257); +#90255 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90256 = DIRECTION('',(0.,0.,1.)); +#90257 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90258 = ADVANCED_FACE('',(#90259),#90294,.T.); +#90259 = FACE_BOUND('',#90260,.T.); +#90260 = EDGE_LOOP('',(#90261,#90270,#90291,#90292,#90293)); +#90261 = ORIENTED_EDGE('',*,*,#90262,.T.); +#90262 = EDGE_CURVE('',#90217,#90263,#90265,.T.); +#90263 = VERTEX_POINT('',#90264); +#90264 = CARTESIAN_POINT('',(0.945,-2.561225292707,7.7)); +#90265 = CIRCLE('',#90266,2.73); +#90266 = AXIS2_PLACEMENT_3D('',#90267,#90268,#90269); +#90267 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90268 = DIRECTION('',(0.,0.,-1.)); +#90269 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90270 = ORIENTED_EDGE('',*,*,#90271,.F.); +#90271 = EDGE_CURVE('',#89992,#90263,#90272,.T.); +#90272 = B_SPLINE_CURVE_WITH_KNOTS('',5,(#90273,#90274,#90275,#90276, + #90277,#90278,#90279,#90280,#90281,#90282,#90283,#90284,#90285, + #90286,#90287,#90288,#90289,#90290),.UNSPECIFIED.,.F.,.F.,(6,4,4,4,6 + ),(0.,0.249577466959,0.497599275595,0.747309785144,1.), + .UNSPECIFIED.); +#90273 = CARTESIAN_POINT('',(0.945,-3.004908484463,7.28)); +#90274 = CARTESIAN_POINT('',(0.945,-3.00490848098,7.313228015972)); +#90275 = CARTESIAN_POINT('',(0.945,-3.001463821946,7.346456730623)); +#90276 = CARTESIAN_POINT('',(0.945,-2.994574119979,7.37923750592)); +#90277 = CARTESIAN_POINT('',(0.945,-2.984338296281,7.411126992484)); +#90278 = CARTESIAN_POINT('',(0.945,-2.957631160105,7.472127049008)); +#90279 = CARTESIAN_POINT('',(0.945,-2.941198599863,7.501254840033)); +#90280 = CARTESIAN_POINT('',(0.945,-2.921827872489,7.528710244249)); +#90281 = CARTESIAN_POINT('',(0.945,-2.899782785017,7.554145479613)); +#90282 = CARTESIAN_POINT('',(0.945,-2.850815155173,7.600572655351)); +#90283 = CARTESIAN_POINT('',(0.945,-2.823859719072,7.621533802992)); +#90284 = CARTESIAN_POINT('',(0.945,-2.794840653886,7.639877476491)); +#90285 = CARTESIAN_POINT('',(0.945,-2.764133571654,7.655390822857)); +#90286 = CARTESIAN_POINT('',(0.945,-2.699757531027,7.680632446489)); +#90287 = CARTESIAN_POINT('',(0.945,-2.666057065743,7.690289667083)); +#90288 = CARTESIAN_POINT('',(0.945,-2.631447275385,7.696766294835)); +#90289 = CARTESIAN_POINT('',(0.945,-2.596359892027,7.699999996714)); +#90290 = CARTESIAN_POINT('',(0.945,-2.561225292707,7.7)); +#90291 = ORIENTED_EDGE('',*,*,#89991,.F.); +#90292 = ORIENTED_EDGE('',*,*,#89982,.F.); +#90293 = ORIENTED_EDGE('',*,*,#90225,.T.); +#90294 = TOROIDAL_SURFACE('',#90295,2.73,0.42); +#90295 = AXIS2_PLACEMENT_3D('',#90296,#90297,#90298); +#90296 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90297 = DIRECTION('',(0.,0.,1.)); +#90298 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90299 = ADVANCED_FACE('',(#90300),#90312,.T.); +#90300 = FACE_BOUND('',#90301,.T.); +#90301 = EDGE_LOOP('',(#90302,#90303,#90310,#90311)); +#90302 = ORIENTED_EDGE('',*,*,#90271,.T.); +#90303 = ORIENTED_EDGE('',*,*,#90304,.T.); +#90304 = EDGE_CURVE('',#90263,#90215,#90305,.T.); +#90305 = CIRCLE('',#90306,2.73); +#90306 = AXIS2_PLACEMENT_3D('',#90307,#90308,#90309); +#90307 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90308 = DIRECTION('',(0.,0.,-1.)); +#90309 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90310 = ORIENTED_EDGE('',*,*,#90247,.F.); +#90311 = ORIENTED_EDGE('',*,*,#90000,.F.); +#90312 = TOROIDAL_SURFACE('',#90313,2.73,0.42); +#90313 = AXIS2_PLACEMENT_3D('',#90314,#90315,#90316); +#90314 = CARTESIAN_POINT('',(0.,0.,7.28)); +#90315 = DIRECTION('',(0.,0.,1.)); +#90316 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90317 = ADVANCED_FACE('',(#90318),#90324,.F.); +#90318 = FACE_BOUND('',#90319,.F.); +#90319 = EDGE_LOOP('',(#90320,#90321,#90322,#90323)); +#90320 = ORIENTED_EDGE('',*,*,#90183,.T.); +#90321 = ORIENTED_EDGE('',*,*,#90034,.T.); +#90322 = ORIENTED_EDGE('',*,*,#90048,.T.); +#90323 = ORIENTED_EDGE('',*,*,#90084,.T.); +#90324 = PLANE('',#90325); +#90325 = AXIS2_PLACEMENT_3D('',#90326,#90327,#90328); +#90326 = CARTESIAN_POINT('',(-2.47395012666,2.870543344061E-16,0.)); +#90327 = DIRECTION('',(0.,0.,1.)); +#90328 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90329 = ADVANCED_FACE('',(#90330),#90336,.F.); +#90330 = FACE_BOUND('',#90331,.F.); +#90331 = EDGE_LOOP('',(#90332,#90333,#90334,#90335)); +#90332 = ORIENTED_EDGE('',*,*,#90200,.T.); +#90333 = ORIENTED_EDGE('',*,*,#90116,.T.); +#90334 = ORIENTED_EDGE('',*,*,#90130,.T.); +#90335 = ORIENTED_EDGE('',*,*,#90166,.T.); +#90336 = PLANE('',#90337); +#90337 = AXIS2_PLACEMENT_3D('',#90338,#90339,#90340); +#90338 = CARTESIAN_POINT('',(2.47395012666,-5.900258447925E-16,0.)); +#90339 = DIRECTION('',(0.,0.,1.)); +#90340 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#90341 = ADVANCED_FACE('',(#90342),#90352,.F.); +#90342 = FACE_BOUND('',#90343,.F.); +#90343 = EDGE_LOOP('',(#90344,#90345,#90346)); +#90344 = ORIENTED_EDGE('',*,*,#90304,.T.); +#90345 = ORIENTED_EDGE('',*,*,#90214,.T.); +#90346 = ORIENTED_EDGE('',*,*,#90347,.T.); +#90347 = EDGE_CURVE('',#90217,#90263,#90348,.T.); +#90348 = LINE('',#90349,#90350); +#90349 = CARTESIAN_POINT('',(0.945,3.15,7.7)); +#90350 = VECTOR('',#90351,1.); +#90351 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#90352 = PLANE('',#90353); +#90353 = AXIS2_PLACEMENT_3D('',#90354,#90355,#90356); +#90354 = CARTESIAN_POINT('',(0.,0.,7.7)); +#90355 = DIRECTION('',(-0.,0.,-1.)); +#90356 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90357 = ADVANCED_FACE('',(#90358),#90362,.T.); +#90358 = FACE_BOUND('',#90359,.T.); +#90359 = EDGE_LOOP('',(#90360,#90361)); +#90360 = ORIENTED_EDGE('',*,*,#90262,.F.); +#90361 = ORIENTED_EDGE('',*,*,#90347,.T.); +#90362 = PLANE('',#90363); +#90363 = AXIS2_PLACEMENT_3D('',#90364,#90365,#90366); +#90364 = CARTESIAN_POINT('',(3.15,3.15,7.7)); +#90365 = DIRECTION('',(0.,0.,1.)); +#90366 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#90367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#90371)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#90368,#90369,#90370)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#90368 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#90369 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#90370 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#90371 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#90368, + 'distance_accuracy_value','confusion accuracy'); +#90372 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90373,#90375); +#90373 = ( REPRESENTATION_RELATIONSHIP('','',#89001,#88978) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90374) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90374 = ITEM_DEFINED_TRANSFORMATION('','',#11,#88979); +#90375 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90376); +#90376 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('102','=>[0:1:1:47]','',#88973, + #88996,$); +#90377 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#88998)); +#90378 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90379,#90381); +#90379 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90380) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90380 = ITEM_DEFINED_TRANSFORMATION('','',#11,#335); +#90381 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90382); +#90382 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('104','DzG','',#5,#36156,$); +#90383 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90384,#90386); +#90384 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90385) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90385 = ITEM_DEFINED_TRANSFORMATION('','',#11,#339); +#90386 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90387); +#90387 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('105','R40','',#5,#523,$); +#90388 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90389,#90391); +#90389 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90390) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90390 = ITEM_DEFINED_TRANSFORMATION('','',#11,#343); +#90391 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90392); +#90392 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('106','R42','',#5,#523,$); +#90393 = SHAPE_DEFINITION_REPRESENTATION(#90394,#90400); +#90394 = PRODUCT_DEFINITION_SHAPE('','',#90395); +#90395 = PRODUCT_DEFINITION('design','',#90396,#90399); +#90396 = PRODUCT_DEFINITION_FORMATION('','',#90397); +#90397 = PRODUCT('QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm', + 'QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm','',(#90398)); +#90398 = PRODUCT_CONTEXT('',#2,'mechanical'); +#90399 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#90400 = SHAPE_REPRESENTATION('',(#11,#90401),#90405); +#90401 = AXIS2_PLACEMENT_3D('',#90402,#90403,#90404); +#90402 = CARTESIAN_POINT('',(0.,0.,0.)); +#90403 = DIRECTION('',(0.,0.,1.)); +#90404 = DIRECTION('',(1.,0.,-0.)); +#90405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#90409)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#90406,#90407,#90408)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#90406 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#90407 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#90408 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#90409 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#90406, + 'distance_accuracy_value','confusion accuracy'); +#90410 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#90411,#90413); +#90411 = ( REPRESENTATION_RELATIONSHIP('','',#90400,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#90412) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#90412 = ITEM_DEFINED_TRANSFORMATION('','',#11,#347); +#90413 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #90414); +#90414 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('108','U6','',#5,#90395,$); +#90415 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#90397)); +#90416 = SHAPE_DEFINITION_REPRESENTATION(#90417,#90423); +#90417 = PRODUCT_DEFINITION_SHAPE('','',#90418); +#90418 = PRODUCT_DEFINITION('design','',#90419,#90422); +#90419 = PRODUCT_DEFINITION_FORMATION('','',#90420); +#90420 = PRODUCT('QFN-24-1EP_4x5mm_Pitch0.5mm', + 'QFN-24-1EP_4x5mm_Pitch0.5mm','',(#90421)); +#90421 = PRODUCT_CONTEXT('',#2,'mechanical'); +#90422 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#90423 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#90424),#95594); +#90424 = MANIFOLD_SOLID_BREP('',#90425); +#90425 = CLOSED_SHELL('',(#90426,#90467,#90514,#90539,#90579,#90596, + #91446,#91578,#91590,#91775,#91815,#91840,#91873,#91913,#91953, + #91978,#92003,#92036,#92069,#92109,#92149,#92174,#92199,#92232, + #92265,#92305,#92345,#92370,#92395,#92428,#92461,#92501,#92541, + #92566,#92591,#92624,#92657,#92842,#92882,#92922,#92947,#92972, + #93005,#93038,#93078,#93118,#93143,#93168,#93201,#93234,#93366, + #93406,#93446,#93471,#93496,#93529,#93562,#93602,#93642,#93667, + #93692,#93725,#93758,#93798,#93838,#93863,#93888,#93921,#93954, + #93994,#94034,#94059,#94084,#94117,#94150,#94190,#94230,#94255, + #94280,#94313,#94346,#94377,#94401,#94425,#94449,#94466,#94489, + #94506,#94523,#94540,#94557,#94574,#94591,#94608,#94625,#94642, + #94659,#94676,#94693,#94705,#94722,#94734,#94751,#94763,#94780, + #94792,#94809,#94821,#94838,#94850,#94867,#94879,#94896,#94908, + #94925,#94937,#94954,#94971,#94988,#95005,#95022,#95039,#95056, + #95073,#95085,#95102,#95114,#95131,#95143,#95160,#95172,#95189, + #95206,#95223,#95240,#95257,#95274,#95286,#95303,#95315,#95332, + #95344,#95361,#95373,#95390,#95402,#95419,#95431,#95448,#95460, + #95477,#95489,#95506,#95518,#95535,#95547,#95560,#95585)); +#90426 = ADVANCED_FACE('',(#90427),#90462,.T.); +#90427 = FACE_BOUND('',#90428,.F.); +#90428 = EDGE_LOOP('',(#90429,#90439,#90448,#90456)); +#90429 = ORIENTED_EDGE('',*,*,#90430,.T.); +#90430 = EDGE_CURVE('',#90431,#90433,#90435,.T.); +#90431 = VERTEX_POINT('',#90432); +#90432 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90433 = VERTEX_POINT('',#90434); +#90434 = CARTESIAN_POINT('',(-1.125,2.225,0.)); +#90435 = LINE('',#90436,#90437); +#90436 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90437 = VECTOR('',#90438,1.); +#90438 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90439 = ORIENTED_EDGE('',*,*,#90440,.T.); +#90440 = EDGE_CURVE('',#90433,#90441,#90443,.T.); +#90441 = VERTEX_POINT('',#90442); +#90442 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90443 = CIRCLE('',#90444,0.125); +#90444 = AXIS2_PLACEMENT_3D('',#90445,#90446,#90447); +#90445 = CARTESIAN_POINT('',(-1.,2.225,0.)); +#90446 = DIRECTION('',(0.,0.,1.)); +#90447 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90448 = ORIENTED_EDGE('',*,*,#90449,.T.); +#90449 = EDGE_CURVE('',#90441,#90450,#90452,.T.); +#90450 = VERTEX_POINT('',#90451); +#90451 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90452 = LINE('',#90453,#90454); +#90453 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90454 = VECTOR('',#90455,1.); +#90455 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90456 = ORIENTED_EDGE('',*,*,#90457,.T.); +#90457 = EDGE_CURVE('',#90450,#90431,#90458,.T.); +#90458 = LINE('',#90459,#90460); +#90459 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90460 = VECTOR('',#90461,1.); +#90461 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90462 = PLANE('',#90463); +#90463 = AXIS2_PLACEMENT_3D('',#90464,#90465,#90466); +#90464 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90465 = DIRECTION('',(-0.,0.,-1.)); +#90466 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#90467 = ADVANCED_FACE('',(#90468),#90509,.F.); +#90468 = FACE_BOUND('',#90469,.F.); +#90469 = EDGE_LOOP('',(#90470,#90471,#90479,#90487,#90495,#90503)); +#90470 = ORIENTED_EDGE('',*,*,#90430,.F.); +#90471 = ORIENTED_EDGE('',*,*,#90472,.T.); +#90472 = EDGE_CURVE('',#90431,#90473,#90475,.T.); +#90473 = VERTEX_POINT('',#90474); +#90474 = CARTESIAN_POINT('',(-1.125,2.5,0.2)); +#90475 = LINE('',#90476,#90477); +#90476 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90477 = VECTOR('',#90478,1.); +#90478 = DIRECTION('',(0.,0.,1.)); +#90479 = ORIENTED_EDGE('',*,*,#90480,.T.); +#90480 = EDGE_CURVE('',#90473,#90481,#90483,.T.); +#90481 = VERTEX_POINT('',#90482); +#90482 = CARTESIAN_POINT('',(-1.125,2.49,0.2)); +#90483 = LINE('',#90484,#90485); +#90484 = CARTESIAN_POINT('',(-1.125,2.5,0.2)); +#90485 = VECTOR('',#90486,1.); +#90486 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90487 = ORIENTED_EDGE('',*,*,#90488,.F.); +#90488 = EDGE_CURVE('',#90489,#90481,#90491,.T.); +#90489 = VERTEX_POINT('',#90490); +#90490 = CARTESIAN_POINT('',(-1.125,2.49,2.E-02)); +#90491 = LINE('',#90492,#90493); +#90492 = CARTESIAN_POINT('',(-1.125,2.49,1.E-02)); +#90493 = VECTOR('',#90494,1.); +#90494 = DIRECTION('',(0.,0.,1.)); +#90495 = ORIENTED_EDGE('',*,*,#90496,.F.); +#90496 = EDGE_CURVE('',#90497,#90489,#90499,.T.); +#90497 = VERTEX_POINT('',#90498); +#90498 = CARTESIAN_POINT('',(-1.125,2.225,2.E-02)); +#90499 = LINE('',#90500,#90501); +#90500 = CARTESIAN_POINT('',(-1.125,2.495,2.E-02)); +#90501 = VECTOR('',#90502,1.); +#90502 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90503 = ORIENTED_EDGE('',*,*,#90504,.F.); +#90504 = EDGE_CURVE('',#90433,#90497,#90505,.T.); +#90505 = LINE('',#90506,#90507); +#90506 = CARTESIAN_POINT('',(-1.125,2.225,0.)); +#90507 = VECTOR('',#90508,1.); +#90508 = DIRECTION('',(0.,0.,1.)); +#90509 = PLANE('',#90510); +#90510 = AXIS2_PLACEMENT_3D('',#90511,#90512,#90513); +#90511 = CARTESIAN_POINT('',(-1.125,2.5,0.)); +#90512 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#90513 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90514 = ADVANCED_FACE('',(#90515),#90534,.T.); +#90515 = FACE_BOUND('',#90516,.T.); +#90516 = EDGE_LOOP('',(#90517,#90525,#90532,#90533)); +#90517 = ORIENTED_EDGE('',*,*,#90518,.T.); +#90518 = EDGE_CURVE('',#90441,#90519,#90521,.T.); +#90519 = VERTEX_POINT('',#90520); +#90520 = CARTESIAN_POINT('',(-0.875,2.225,2.E-02)); +#90521 = LINE('',#90522,#90523); +#90522 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90523 = VECTOR('',#90524,1.); +#90524 = DIRECTION('',(0.,0.,1.)); +#90525 = ORIENTED_EDGE('',*,*,#90526,.T.); +#90526 = EDGE_CURVE('',#90519,#90497,#90527,.T.); +#90527 = CIRCLE('',#90528,0.125); +#90528 = AXIS2_PLACEMENT_3D('',#90529,#90530,#90531); +#90529 = CARTESIAN_POINT('',(-1.,2.225,2.E-02)); +#90530 = DIRECTION('',(0.,0.,-1.)); +#90531 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90532 = ORIENTED_EDGE('',*,*,#90504,.F.); +#90533 = ORIENTED_EDGE('',*,*,#90440,.T.); +#90534 = CYLINDRICAL_SURFACE('',#90535,0.125); +#90535 = AXIS2_PLACEMENT_3D('',#90536,#90537,#90538); +#90536 = CARTESIAN_POINT('',(-1.,2.225,0.)); +#90537 = DIRECTION('',(0.,0.,-1.)); +#90538 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90539 = ADVANCED_FACE('',(#90540),#90574,.F.); +#90540 = FACE_BOUND('',#90541,.F.); +#90541 = EDGE_LOOP('',(#90542,#90543,#90544,#90552,#90560,#90568)); +#90542 = ORIENTED_EDGE('',*,*,#90449,.F.); +#90543 = ORIENTED_EDGE('',*,*,#90518,.T.); +#90544 = ORIENTED_EDGE('',*,*,#90545,.F.); +#90545 = EDGE_CURVE('',#90546,#90519,#90548,.T.); +#90546 = VERTEX_POINT('',#90547); +#90547 = CARTESIAN_POINT('',(-0.875,2.49,2.E-02)); +#90548 = LINE('',#90549,#90550); +#90549 = CARTESIAN_POINT('',(-0.875,2.3575,2.E-02)); +#90550 = VECTOR('',#90551,1.); +#90551 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90552 = ORIENTED_EDGE('',*,*,#90553,.F.); +#90553 = EDGE_CURVE('',#90554,#90546,#90556,.T.); +#90554 = VERTEX_POINT('',#90555); +#90555 = CARTESIAN_POINT('',(-0.875,2.49,0.2)); +#90556 = LINE('',#90557,#90558); +#90557 = CARTESIAN_POINT('',(-0.875,2.49,1.E-02)); +#90558 = VECTOR('',#90559,1.); +#90559 = DIRECTION('',(-0.,0.,-1.)); +#90560 = ORIENTED_EDGE('',*,*,#90561,.T.); +#90561 = EDGE_CURVE('',#90554,#90562,#90564,.T.); +#90562 = VERTEX_POINT('',#90563); +#90563 = CARTESIAN_POINT('',(-0.875,2.5,0.2)); +#90564 = LINE('',#90565,#90566); +#90565 = CARTESIAN_POINT('',(-0.875,2.225,0.2)); +#90566 = VECTOR('',#90567,1.); +#90567 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90568 = ORIENTED_EDGE('',*,*,#90569,.F.); +#90569 = EDGE_CURVE('',#90450,#90562,#90570,.T.); +#90570 = LINE('',#90571,#90572); +#90571 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90572 = VECTOR('',#90573,1.); +#90573 = DIRECTION('',(0.,0.,1.)); +#90574 = PLANE('',#90575); +#90575 = AXIS2_PLACEMENT_3D('',#90576,#90577,#90578); +#90576 = CARTESIAN_POINT('',(-0.875,2.225,0.)); +#90577 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90578 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#90579 = ADVANCED_FACE('',(#90580),#90591,.F.); +#90580 = FACE_BOUND('',#90581,.F.); +#90581 = EDGE_LOOP('',(#90582,#90583,#90589,#90590)); +#90582 = ORIENTED_EDGE('',*,*,#90569,.T.); +#90583 = ORIENTED_EDGE('',*,*,#90584,.T.); +#90584 = EDGE_CURVE('',#90562,#90473,#90585,.T.); +#90585 = LINE('',#90586,#90587); +#90586 = CARTESIAN_POINT('',(-0.875,2.5,0.2)); +#90587 = VECTOR('',#90588,1.); +#90588 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90589 = ORIENTED_EDGE('',*,*,#90472,.F.); +#90590 = ORIENTED_EDGE('',*,*,#90457,.F.); +#90591 = PLANE('',#90592); +#90592 = AXIS2_PLACEMENT_3D('',#90593,#90594,#90595); +#90593 = CARTESIAN_POINT('',(-0.875,2.5,0.)); +#90594 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#90595 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#90596 = ADVANCED_FACE('',(#90597,#91399),#91441,.F.); +#90597 = FACE_BOUND('',#90598,.F.); +#90598 = EDGE_LOOP('',(#90599,#90607,#90615,#90623,#90632,#90640,#90648, + #90656,#90665,#90673,#90681,#90689,#90698,#90706,#90714,#90722, + #90731,#90739,#90747,#90755,#90764,#90772,#90780,#90788,#90797, + #90805,#90813,#90821,#90830,#90838,#90846,#90854,#90862,#90871, + #90879,#90887,#90895,#90904,#90912,#90920,#90928,#90937,#90945, + #90953,#90961,#90970,#90978,#90986,#90994,#91003,#91011,#91019, + #91027,#91035,#91044,#91052,#91060,#91068,#91077,#91085,#91093, + #91101,#91110,#91118,#91126,#91134,#91143,#91151,#91159,#91167, + #91176,#91184,#91192,#91200,#91209,#91217,#91225,#91233,#91242, + #91250,#91258,#91266,#91274,#91283,#91291,#91299,#91307,#91316, + #91324,#91332,#91340,#91349,#91357,#91365,#91373,#91382,#91390, + #91396,#91397,#91398)); +#90599 = ORIENTED_EDGE('',*,*,#90600,.F.); +#90600 = EDGE_CURVE('',#90601,#90489,#90603,.T.); +#90601 = VERTEX_POINT('',#90602); +#90602 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90603 = LINE('',#90604,#90605); +#90604 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90605 = VECTOR('',#90606,1.); +#90606 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90607 = ORIENTED_EDGE('',*,*,#90608,.T.); +#90608 = EDGE_CURVE('',#90601,#90609,#90611,.T.); +#90609 = VERTEX_POINT('',#90610); +#90610 = CARTESIAN_POINT('',(-1.99,1.625,2.E-02)); +#90611 = LINE('',#90612,#90613); +#90612 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90613 = VECTOR('',#90614,1.); +#90614 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90615 = ORIENTED_EDGE('',*,*,#90616,.T.); +#90616 = EDGE_CURVE('',#90609,#90617,#90619,.T.); +#90617 = VERTEX_POINT('',#90618); +#90618 = CARTESIAN_POINT('',(-1.725,1.625,2.E-02)); +#90619 = LINE('',#90620,#90621); +#90620 = CARTESIAN_POINT('',(-1.8575,1.625,2.E-02)); +#90621 = VECTOR('',#90622,1.); +#90622 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90623 = ORIENTED_EDGE('',*,*,#90624,.T.); +#90624 = EDGE_CURVE('',#90617,#90625,#90627,.T.); +#90625 = VERTEX_POINT('',#90626); +#90626 = CARTESIAN_POINT('',(-1.725,1.375,2.E-02)); +#90627 = CIRCLE('',#90628,0.125); +#90628 = AXIS2_PLACEMENT_3D('',#90629,#90630,#90631); +#90629 = CARTESIAN_POINT('',(-1.725,1.5,2.E-02)); +#90630 = DIRECTION('',(-0.,0.,-1.)); +#90631 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90632 = ORIENTED_EDGE('',*,*,#90633,.T.); +#90633 = EDGE_CURVE('',#90625,#90634,#90636,.T.); +#90634 = VERTEX_POINT('',#90635); +#90635 = CARTESIAN_POINT('',(-1.99,1.375,2.E-02)); +#90636 = LINE('',#90637,#90638); +#90637 = CARTESIAN_POINT('',(-1.995,1.375,2.E-02)); +#90638 = VECTOR('',#90639,1.); +#90639 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90640 = ORIENTED_EDGE('',*,*,#90641,.T.); +#90641 = EDGE_CURVE('',#90634,#90642,#90644,.T.); +#90642 = VERTEX_POINT('',#90643); +#90643 = CARTESIAN_POINT('',(-1.99,1.125,2.E-02)); +#90644 = LINE('',#90645,#90646); +#90645 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90646 = VECTOR('',#90647,1.); +#90647 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90648 = ORIENTED_EDGE('',*,*,#90649,.T.); +#90649 = EDGE_CURVE('',#90642,#90650,#90652,.T.); +#90650 = VERTEX_POINT('',#90651); +#90651 = CARTESIAN_POINT('',(-1.725,1.125,2.E-02)); +#90652 = LINE('',#90653,#90654); +#90653 = CARTESIAN_POINT('',(-1.8575,1.125,2.E-02)); +#90654 = VECTOR('',#90655,1.); +#90655 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90656 = ORIENTED_EDGE('',*,*,#90657,.T.); +#90657 = EDGE_CURVE('',#90650,#90658,#90660,.T.); +#90658 = VERTEX_POINT('',#90659); +#90659 = CARTESIAN_POINT('',(-1.725,0.875,2.E-02)); +#90660 = CIRCLE('',#90661,0.125); +#90661 = AXIS2_PLACEMENT_3D('',#90662,#90663,#90664); +#90662 = CARTESIAN_POINT('',(-1.725,1.,2.E-02)); +#90663 = DIRECTION('',(-0.,0.,-1.)); +#90664 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90665 = ORIENTED_EDGE('',*,*,#90666,.T.); +#90666 = EDGE_CURVE('',#90658,#90667,#90669,.T.); +#90667 = VERTEX_POINT('',#90668); +#90668 = CARTESIAN_POINT('',(-1.99,0.875,2.E-02)); +#90669 = LINE('',#90670,#90671); +#90670 = CARTESIAN_POINT('',(-1.995,0.875,2.E-02)); +#90671 = VECTOR('',#90672,1.); +#90672 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90673 = ORIENTED_EDGE('',*,*,#90674,.T.); +#90674 = EDGE_CURVE('',#90667,#90675,#90677,.T.); +#90675 = VERTEX_POINT('',#90676); +#90676 = CARTESIAN_POINT('',(-1.99,0.625,2.E-02)); +#90677 = LINE('',#90678,#90679); +#90678 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90679 = VECTOR('',#90680,1.); +#90680 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90681 = ORIENTED_EDGE('',*,*,#90682,.T.); +#90682 = EDGE_CURVE('',#90675,#90683,#90685,.T.); +#90683 = VERTEX_POINT('',#90684); +#90684 = CARTESIAN_POINT('',(-1.725,0.625,2.E-02)); +#90685 = LINE('',#90686,#90687); +#90686 = CARTESIAN_POINT('',(-1.8575,0.625,2.E-02)); +#90687 = VECTOR('',#90688,1.); +#90688 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90689 = ORIENTED_EDGE('',*,*,#90690,.T.); +#90690 = EDGE_CURVE('',#90683,#90691,#90693,.T.); +#90691 = VERTEX_POINT('',#90692); +#90692 = CARTESIAN_POINT('',(-1.725,0.375,2.E-02)); +#90693 = CIRCLE('',#90694,0.125); +#90694 = AXIS2_PLACEMENT_3D('',#90695,#90696,#90697); +#90695 = CARTESIAN_POINT('',(-1.725,0.5,2.E-02)); +#90696 = DIRECTION('',(-0.,0.,-1.)); +#90697 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90698 = ORIENTED_EDGE('',*,*,#90699,.T.); +#90699 = EDGE_CURVE('',#90691,#90700,#90702,.T.); +#90700 = VERTEX_POINT('',#90701); +#90701 = CARTESIAN_POINT('',(-1.99,0.375,2.E-02)); +#90702 = LINE('',#90703,#90704); +#90703 = CARTESIAN_POINT('',(-1.995,0.375,2.E-02)); +#90704 = VECTOR('',#90705,1.); +#90705 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90706 = ORIENTED_EDGE('',*,*,#90707,.T.); +#90707 = EDGE_CURVE('',#90700,#90708,#90710,.T.); +#90708 = VERTEX_POINT('',#90709); +#90709 = CARTESIAN_POINT('',(-1.99,0.125,2.E-02)); +#90710 = LINE('',#90711,#90712); +#90711 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90712 = VECTOR('',#90713,1.); +#90713 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90714 = ORIENTED_EDGE('',*,*,#90715,.T.); +#90715 = EDGE_CURVE('',#90708,#90716,#90718,.T.); +#90716 = VERTEX_POINT('',#90717); +#90717 = CARTESIAN_POINT('',(-1.725,0.125,2.E-02)); +#90718 = LINE('',#90719,#90720); +#90719 = CARTESIAN_POINT('',(-1.8575,0.125,2.E-02)); +#90720 = VECTOR('',#90721,1.); +#90721 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90722 = ORIENTED_EDGE('',*,*,#90723,.T.); +#90723 = EDGE_CURVE('',#90716,#90724,#90726,.T.); +#90724 = VERTEX_POINT('',#90725); +#90725 = CARTESIAN_POINT('',(-1.725,-0.125,2.E-02)); +#90726 = CIRCLE('',#90727,0.125); +#90727 = AXIS2_PLACEMENT_3D('',#90728,#90729,#90730); +#90728 = CARTESIAN_POINT('',(-1.725,5.495603971895E-16,2.E-02)); +#90729 = DIRECTION('',(-0.,0.,-1.)); +#90730 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90731 = ORIENTED_EDGE('',*,*,#90732,.T.); +#90732 = EDGE_CURVE('',#90724,#90733,#90735,.T.); +#90733 = VERTEX_POINT('',#90734); +#90734 = CARTESIAN_POINT('',(-1.99,-0.125,2.E-02)); +#90735 = LINE('',#90736,#90737); +#90736 = CARTESIAN_POINT('',(-1.995,-0.125,2.E-02)); +#90737 = VECTOR('',#90738,1.); +#90738 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90739 = ORIENTED_EDGE('',*,*,#90740,.T.); +#90740 = EDGE_CURVE('',#90733,#90741,#90743,.T.); +#90741 = VERTEX_POINT('',#90742); +#90742 = CARTESIAN_POINT('',(-1.99,-0.375,2.E-02)); +#90743 = LINE('',#90744,#90745); +#90744 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90745 = VECTOR('',#90746,1.); +#90746 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90747 = ORIENTED_EDGE('',*,*,#90748,.T.); +#90748 = EDGE_CURVE('',#90741,#90749,#90751,.T.); +#90749 = VERTEX_POINT('',#90750); +#90750 = CARTESIAN_POINT('',(-1.725,-0.375,2.E-02)); +#90751 = LINE('',#90752,#90753); +#90752 = CARTESIAN_POINT('',(-1.8575,-0.375,2.E-02)); +#90753 = VECTOR('',#90754,1.); +#90754 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90755 = ORIENTED_EDGE('',*,*,#90756,.T.); +#90756 = EDGE_CURVE('',#90749,#90757,#90759,.T.); +#90757 = VERTEX_POINT('',#90758); +#90758 = CARTESIAN_POINT('',(-1.725,-0.625,2.E-02)); +#90759 = CIRCLE('',#90760,0.125); +#90760 = AXIS2_PLACEMENT_3D('',#90761,#90762,#90763); +#90761 = CARTESIAN_POINT('',(-1.725,-0.5,2.E-02)); +#90762 = DIRECTION('',(-0.,0.,-1.)); +#90763 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90764 = ORIENTED_EDGE('',*,*,#90765,.T.); +#90765 = EDGE_CURVE('',#90757,#90766,#90768,.T.); +#90766 = VERTEX_POINT('',#90767); +#90767 = CARTESIAN_POINT('',(-1.99,-0.625,2.E-02)); +#90768 = LINE('',#90769,#90770); +#90769 = CARTESIAN_POINT('',(-1.995,-0.625,2.E-02)); +#90770 = VECTOR('',#90771,1.); +#90771 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90772 = ORIENTED_EDGE('',*,*,#90773,.T.); +#90773 = EDGE_CURVE('',#90766,#90774,#90776,.T.); +#90774 = VERTEX_POINT('',#90775); +#90775 = CARTESIAN_POINT('',(-1.99,-0.875,2.E-02)); +#90776 = LINE('',#90777,#90778); +#90777 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90778 = VECTOR('',#90779,1.); +#90779 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90780 = ORIENTED_EDGE('',*,*,#90781,.T.); +#90781 = EDGE_CURVE('',#90774,#90782,#90784,.T.); +#90782 = VERTEX_POINT('',#90783); +#90783 = CARTESIAN_POINT('',(-1.725,-0.875,2.E-02)); +#90784 = LINE('',#90785,#90786); +#90785 = CARTESIAN_POINT('',(-1.8575,-0.875,2.E-02)); +#90786 = VECTOR('',#90787,1.); +#90787 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90788 = ORIENTED_EDGE('',*,*,#90789,.T.); +#90789 = EDGE_CURVE('',#90782,#90790,#90792,.T.); +#90790 = VERTEX_POINT('',#90791); +#90791 = CARTESIAN_POINT('',(-1.725,-1.125,2.E-02)); +#90792 = CIRCLE('',#90793,0.125); +#90793 = AXIS2_PLACEMENT_3D('',#90794,#90795,#90796); +#90794 = CARTESIAN_POINT('',(-1.725,-1.,2.E-02)); +#90795 = DIRECTION('',(-0.,0.,-1.)); +#90796 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90797 = ORIENTED_EDGE('',*,*,#90798,.T.); +#90798 = EDGE_CURVE('',#90790,#90799,#90801,.T.); +#90799 = VERTEX_POINT('',#90800); +#90800 = CARTESIAN_POINT('',(-1.99,-1.125,2.E-02)); +#90801 = LINE('',#90802,#90803); +#90802 = CARTESIAN_POINT('',(-1.995,-1.125,2.E-02)); +#90803 = VECTOR('',#90804,1.); +#90804 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90805 = ORIENTED_EDGE('',*,*,#90806,.T.); +#90806 = EDGE_CURVE('',#90799,#90807,#90809,.T.); +#90807 = VERTEX_POINT('',#90808); +#90808 = CARTESIAN_POINT('',(-1.99,-1.375,2.E-02)); +#90809 = LINE('',#90810,#90811); +#90810 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90811 = VECTOR('',#90812,1.); +#90812 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90813 = ORIENTED_EDGE('',*,*,#90814,.T.); +#90814 = EDGE_CURVE('',#90807,#90815,#90817,.T.); +#90815 = VERTEX_POINT('',#90816); +#90816 = CARTESIAN_POINT('',(-1.725,-1.375,2.E-02)); +#90817 = LINE('',#90818,#90819); +#90818 = CARTESIAN_POINT('',(-1.8575,-1.375,2.E-02)); +#90819 = VECTOR('',#90820,1.); +#90820 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#90821 = ORIENTED_EDGE('',*,*,#90822,.T.); +#90822 = EDGE_CURVE('',#90815,#90823,#90825,.T.); +#90823 = VERTEX_POINT('',#90824); +#90824 = CARTESIAN_POINT('',(-1.725,-1.625,2.E-02)); +#90825 = CIRCLE('',#90826,0.125); +#90826 = AXIS2_PLACEMENT_3D('',#90827,#90828,#90829); +#90827 = CARTESIAN_POINT('',(-1.725,-1.5,2.E-02)); +#90828 = DIRECTION('',(-0.,0.,-1.)); +#90829 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#90830 = ORIENTED_EDGE('',*,*,#90831,.T.); +#90831 = EDGE_CURVE('',#90823,#90832,#90834,.T.); +#90832 = VERTEX_POINT('',#90833); +#90833 = CARTESIAN_POINT('',(-1.99,-1.625,2.E-02)); +#90834 = LINE('',#90835,#90836); +#90835 = CARTESIAN_POINT('',(-1.995,-1.625,2.E-02)); +#90836 = VECTOR('',#90837,1.); +#90837 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#90838 = ORIENTED_EDGE('',*,*,#90839,.T.); +#90839 = EDGE_CURVE('',#90832,#90840,#90842,.T.); +#90840 = VERTEX_POINT('',#90841); +#90841 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90842 = LINE('',#90843,#90844); +#90843 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#90844 = VECTOR('',#90845,1.); +#90845 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#90846 = ORIENTED_EDGE('',*,*,#90847,.T.); +#90847 = EDGE_CURVE('',#90840,#90848,#90850,.T.); +#90848 = VERTEX_POINT('',#90849); +#90849 = CARTESIAN_POINT('',(-1.125,-2.49,2.E-02)); +#90850 = LINE('',#90851,#90852); +#90851 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90852 = VECTOR('',#90853,1.); +#90853 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90854 = ORIENTED_EDGE('',*,*,#90855,.T.); +#90855 = EDGE_CURVE('',#90848,#90856,#90858,.T.); +#90856 = VERTEX_POINT('',#90857); +#90857 = CARTESIAN_POINT('',(-1.125,-2.225,2.E-02)); +#90858 = LINE('',#90859,#90860); +#90859 = CARTESIAN_POINT('',(-1.125,0.1325,2.E-02)); +#90860 = VECTOR('',#90861,1.); +#90861 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90862 = ORIENTED_EDGE('',*,*,#90863,.T.); +#90863 = EDGE_CURVE('',#90856,#90864,#90866,.T.); +#90864 = VERTEX_POINT('',#90865); +#90865 = CARTESIAN_POINT('',(-0.875,-2.225,2.E-02)); +#90866 = CIRCLE('',#90867,0.125); +#90867 = AXIS2_PLACEMENT_3D('',#90868,#90869,#90870); +#90868 = CARTESIAN_POINT('',(-1.,-2.225,2.E-02)); +#90869 = DIRECTION('',(0.,-0.,-1.)); +#90870 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90871 = ORIENTED_EDGE('',*,*,#90872,.T.); +#90872 = EDGE_CURVE('',#90864,#90873,#90875,.T.); +#90873 = VERTEX_POINT('',#90874); +#90874 = CARTESIAN_POINT('',(-0.875,-2.49,2.E-02)); +#90875 = LINE('',#90876,#90877); +#90876 = CARTESIAN_POINT('',(-0.875,-5.E-03,2.E-02)); +#90877 = VECTOR('',#90878,1.); +#90878 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90879 = ORIENTED_EDGE('',*,*,#90880,.T.); +#90880 = EDGE_CURVE('',#90873,#90881,#90883,.T.); +#90881 = VERTEX_POINT('',#90882); +#90882 = CARTESIAN_POINT('',(-0.625,-2.49,2.E-02)); +#90883 = LINE('',#90884,#90885); +#90884 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90885 = VECTOR('',#90886,1.); +#90886 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90887 = ORIENTED_EDGE('',*,*,#90888,.T.); +#90888 = EDGE_CURVE('',#90881,#90889,#90891,.T.); +#90889 = VERTEX_POINT('',#90890); +#90890 = CARTESIAN_POINT('',(-0.625,-2.225,2.E-02)); +#90891 = LINE('',#90892,#90893); +#90892 = CARTESIAN_POINT('',(-0.625,0.1325,2.E-02)); +#90893 = VECTOR('',#90894,1.); +#90894 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90895 = ORIENTED_EDGE('',*,*,#90896,.T.); +#90896 = EDGE_CURVE('',#90889,#90897,#90899,.T.); +#90897 = VERTEX_POINT('',#90898); +#90898 = CARTESIAN_POINT('',(-0.375,-2.225,2.E-02)); +#90899 = CIRCLE('',#90900,0.125); +#90900 = AXIS2_PLACEMENT_3D('',#90901,#90902,#90903); +#90901 = CARTESIAN_POINT('',(-0.5,-2.225,2.E-02)); +#90902 = DIRECTION('',(0.,-0.,-1.)); +#90903 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90904 = ORIENTED_EDGE('',*,*,#90905,.T.); +#90905 = EDGE_CURVE('',#90897,#90906,#90908,.T.); +#90906 = VERTEX_POINT('',#90907); +#90907 = CARTESIAN_POINT('',(-0.375,-2.49,2.E-02)); +#90908 = LINE('',#90909,#90910); +#90909 = CARTESIAN_POINT('',(-0.375,-5.E-03,2.E-02)); +#90910 = VECTOR('',#90911,1.); +#90911 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90912 = ORIENTED_EDGE('',*,*,#90913,.T.); +#90913 = EDGE_CURVE('',#90906,#90914,#90916,.T.); +#90914 = VERTEX_POINT('',#90915); +#90915 = CARTESIAN_POINT('',(-0.125,-2.49,2.E-02)); +#90916 = LINE('',#90917,#90918); +#90917 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90918 = VECTOR('',#90919,1.); +#90919 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90920 = ORIENTED_EDGE('',*,*,#90921,.T.); +#90921 = EDGE_CURVE('',#90914,#90922,#90924,.T.); +#90922 = VERTEX_POINT('',#90923); +#90923 = CARTESIAN_POINT('',(-0.125,-2.225,2.E-02)); +#90924 = LINE('',#90925,#90926); +#90925 = CARTESIAN_POINT('',(-0.125,0.1325,2.E-02)); +#90926 = VECTOR('',#90927,1.); +#90927 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90928 = ORIENTED_EDGE('',*,*,#90929,.T.); +#90929 = EDGE_CURVE('',#90922,#90930,#90932,.T.); +#90930 = VERTEX_POINT('',#90931); +#90931 = CARTESIAN_POINT('',(0.125,-2.225,2.E-02)); +#90932 = CIRCLE('',#90933,0.125); +#90933 = AXIS2_PLACEMENT_3D('',#90934,#90935,#90936); +#90934 = CARTESIAN_POINT('',(-9.381384558083E-16,-2.225,2.E-02)); +#90935 = DIRECTION('',(0.,-0.,-1.)); +#90936 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90937 = ORIENTED_EDGE('',*,*,#90938,.T.); +#90938 = EDGE_CURVE('',#90930,#90939,#90941,.T.); +#90939 = VERTEX_POINT('',#90940); +#90940 = CARTESIAN_POINT('',(0.125,-2.49,2.E-02)); +#90941 = LINE('',#90942,#90943); +#90942 = CARTESIAN_POINT('',(0.125,-5.E-03,2.E-02)); +#90943 = VECTOR('',#90944,1.); +#90944 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90945 = ORIENTED_EDGE('',*,*,#90946,.T.); +#90946 = EDGE_CURVE('',#90939,#90947,#90949,.T.); +#90947 = VERTEX_POINT('',#90948); +#90948 = CARTESIAN_POINT('',(0.375,-2.49,2.E-02)); +#90949 = LINE('',#90950,#90951); +#90950 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90951 = VECTOR('',#90952,1.); +#90952 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90953 = ORIENTED_EDGE('',*,*,#90954,.T.); +#90954 = EDGE_CURVE('',#90947,#90955,#90957,.T.); +#90955 = VERTEX_POINT('',#90956); +#90956 = CARTESIAN_POINT('',(0.375,-2.225,2.E-02)); +#90957 = LINE('',#90958,#90959); +#90958 = CARTESIAN_POINT('',(0.375,0.1325,2.E-02)); +#90959 = VECTOR('',#90960,1.); +#90960 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90961 = ORIENTED_EDGE('',*,*,#90962,.T.); +#90962 = EDGE_CURVE('',#90955,#90963,#90965,.T.); +#90963 = VERTEX_POINT('',#90964); +#90964 = CARTESIAN_POINT('',(0.625,-2.225,2.E-02)); +#90965 = CIRCLE('',#90966,0.125); +#90966 = AXIS2_PLACEMENT_3D('',#90967,#90968,#90969); +#90967 = CARTESIAN_POINT('',(0.5,-2.225,2.E-02)); +#90968 = DIRECTION('',(0.,-0.,-1.)); +#90969 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#90970 = ORIENTED_EDGE('',*,*,#90971,.T.); +#90971 = EDGE_CURVE('',#90963,#90972,#90974,.T.); +#90972 = VERTEX_POINT('',#90973); +#90973 = CARTESIAN_POINT('',(0.625,-2.49,2.E-02)); +#90974 = LINE('',#90975,#90976); +#90975 = CARTESIAN_POINT('',(0.625,-5.E-03,2.E-02)); +#90976 = VECTOR('',#90977,1.); +#90977 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#90978 = ORIENTED_EDGE('',*,*,#90979,.T.); +#90979 = EDGE_CURVE('',#90972,#90980,#90982,.T.); +#90980 = VERTEX_POINT('',#90981); +#90981 = CARTESIAN_POINT('',(0.875,-2.49,2.E-02)); +#90982 = LINE('',#90983,#90984); +#90983 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#90984 = VECTOR('',#90985,1.); +#90985 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#90986 = ORIENTED_EDGE('',*,*,#90987,.T.); +#90987 = EDGE_CURVE('',#90980,#90988,#90990,.T.); +#90988 = VERTEX_POINT('',#90989); +#90989 = CARTESIAN_POINT('',(0.875,-2.225,2.E-02)); +#90990 = LINE('',#90991,#90992); +#90991 = CARTESIAN_POINT('',(0.875,0.1325,2.E-02)); +#90992 = VECTOR('',#90993,1.); +#90993 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#90994 = ORIENTED_EDGE('',*,*,#90995,.T.); +#90995 = EDGE_CURVE('',#90988,#90996,#90998,.T.); +#90996 = VERTEX_POINT('',#90997); +#90997 = CARTESIAN_POINT('',(1.125,-2.225,2.E-02)); +#90998 = CIRCLE('',#90999,0.125); +#90999 = AXIS2_PLACEMENT_3D('',#91000,#91001,#91002); +#91000 = CARTESIAN_POINT('',(1.,-2.225,2.E-02)); +#91001 = DIRECTION('',(0.,-0.,-1.)); +#91002 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#91003 = ORIENTED_EDGE('',*,*,#91004,.T.); +#91004 = EDGE_CURVE('',#90996,#91005,#91007,.T.); +#91005 = VERTEX_POINT('',#91006); +#91006 = CARTESIAN_POINT('',(1.125,-2.49,2.E-02)); +#91007 = LINE('',#91008,#91009); +#91008 = CARTESIAN_POINT('',(1.125,-5.000000000001E-03,2.E-02)); +#91009 = VECTOR('',#91010,1.); +#91010 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#91011 = ORIENTED_EDGE('',*,*,#91012,.T.); +#91012 = EDGE_CURVE('',#91005,#91013,#91015,.T.); +#91013 = VERTEX_POINT('',#91014); +#91014 = CARTESIAN_POINT('',(1.99,-2.49,2.E-02)); +#91015 = LINE('',#91016,#91017); +#91016 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#91017 = VECTOR('',#91018,1.); +#91018 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91019 = ORIENTED_EDGE('',*,*,#91020,.F.); +#91020 = EDGE_CURVE('',#91021,#91013,#91023,.T.); +#91021 = VERTEX_POINT('',#91022); +#91022 = CARTESIAN_POINT('',(1.99,-1.625,2.E-02)); +#91023 = LINE('',#91024,#91025); +#91024 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91025 = VECTOR('',#91026,1.); +#91026 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91027 = ORIENTED_EDGE('',*,*,#91028,.T.); +#91028 = EDGE_CURVE('',#91021,#91029,#91031,.T.); +#91029 = VERTEX_POINT('',#91030); +#91030 = CARTESIAN_POINT('',(1.725,-1.625,2.E-02)); +#91031 = LINE('',#91032,#91033); +#91032 = CARTESIAN_POINT('',(-0.1325,-1.625,2.E-02)); +#91033 = VECTOR('',#91034,1.); +#91034 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91035 = ORIENTED_EDGE('',*,*,#91036,.T.); +#91036 = EDGE_CURVE('',#91029,#91037,#91039,.T.); +#91037 = VERTEX_POINT('',#91038); +#91038 = CARTESIAN_POINT('',(1.725,-1.375,2.E-02)); +#91039 = CIRCLE('',#91040,0.125); +#91040 = AXIS2_PLACEMENT_3D('',#91041,#91042,#91043); +#91041 = CARTESIAN_POINT('',(1.725,-1.5,2.E-02)); +#91042 = DIRECTION('',(0.,0.,-1.)); +#91043 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91044 = ORIENTED_EDGE('',*,*,#91045,.T.); +#91045 = EDGE_CURVE('',#91037,#91046,#91048,.T.); +#91046 = VERTEX_POINT('',#91047); +#91047 = CARTESIAN_POINT('',(1.99,-1.375,2.E-02)); +#91048 = LINE('',#91049,#91050); +#91049 = CARTESIAN_POINT('',(4.999999999999E-03,-1.375,2.E-02)); +#91050 = VECTOR('',#91051,1.); +#91051 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91052 = ORIENTED_EDGE('',*,*,#91053,.F.); +#91053 = EDGE_CURVE('',#91054,#91046,#91056,.T.); +#91054 = VERTEX_POINT('',#91055); +#91055 = CARTESIAN_POINT('',(1.99,-1.125,2.E-02)); +#91056 = LINE('',#91057,#91058); +#91057 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91058 = VECTOR('',#91059,1.); +#91059 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91060 = ORIENTED_EDGE('',*,*,#91061,.T.); +#91061 = EDGE_CURVE('',#91054,#91062,#91064,.T.); +#91062 = VERTEX_POINT('',#91063); +#91063 = CARTESIAN_POINT('',(1.725,-1.125,2.E-02)); +#91064 = LINE('',#91065,#91066); +#91065 = CARTESIAN_POINT('',(-0.1325,-1.125,2.E-02)); +#91066 = VECTOR('',#91067,1.); +#91067 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91068 = ORIENTED_EDGE('',*,*,#91069,.T.); +#91069 = EDGE_CURVE('',#91062,#91070,#91072,.T.); +#91070 = VERTEX_POINT('',#91071); +#91071 = CARTESIAN_POINT('',(1.725,-0.875,2.E-02)); +#91072 = CIRCLE('',#91073,0.125); +#91073 = AXIS2_PLACEMENT_3D('',#91074,#91075,#91076); +#91074 = CARTESIAN_POINT('',(1.725,-1.,2.E-02)); +#91075 = DIRECTION('',(0.,0.,-1.)); +#91076 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91077 = ORIENTED_EDGE('',*,*,#91078,.T.); +#91078 = EDGE_CURVE('',#91070,#91079,#91081,.T.); +#91079 = VERTEX_POINT('',#91080); +#91080 = CARTESIAN_POINT('',(1.99,-0.875,2.E-02)); +#91081 = LINE('',#91082,#91083); +#91082 = CARTESIAN_POINT('',(5.E-03,-0.875,2.E-02)); +#91083 = VECTOR('',#91084,1.); +#91084 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91085 = ORIENTED_EDGE('',*,*,#91086,.F.); +#91086 = EDGE_CURVE('',#91087,#91079,#91089,.T.); +#91087 = VERTEX_POINT('',#91088); +#91088 = CARTESIAN_POINT('',(1.99,-0.625,2.E-02)); +#91089 = LINE('',#91090,#91091); +#91090 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91091 = VECTOR('',#91092,1.); +#91092 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91093 = ORIENTED_EDGE('',*,*,#91094,.T.); +#91094 = EDGE_CURVE('',#91087,#91095,#91097,.T.); +#91095 = VERTEX_POINT('',#91096); +#91096 = CARTESIAN_POINT('',(1.725,-0.625,2.E-02)); +#91097 = LINE('',#91098,#91099); +#91098 = CARTESIAN_POINT('',(-0.1325,-0.625,2.E-02)); +#91099 = VECTOR('',#91100,1.); +#91100 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91101 = ORIENTED_EDGE('',*,*,#91102,.T.); +#91102 = EDGE_CURVE('',#91095,#91103,#91105,.T.); +#91103 = VERTEX_POINT('',#91104); +#91104 = CARTESIAN_POINT('',(1.725,-0.375,2.E-02)); +#91105 = CIRCLE('',#91106,0.125); +#91106 = AXIS2_PLACEMENT_3D('',#91107,#91108,#91109); +#91107 = CARTESIAN_POINT('',(1.725,-0.5,2.E-02)); +#91108 = DIRECTION('',(0.,0.,-1.)); +#91109 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91110 = ORIENTED_EDGE('',*,*,#91111,.T.); +#91111 = EDGE_CURVE('',#91103,#91112,#91114,.T.); +#91112 = VERTEX_POINT('',#91113); +#91113 = CARTESIAN_POINT('',(1.99,-0.375,2.E-02)); +#91114 = LINE('',#91115,#91116); +#91115 = CARTESIAN_POINT('',(5.E-03,-0.375,2.E-02)); +#91116 = VECTOR('',#91117,1.); +#91117 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91118 = ORIENTED_EDGE('',*,*,#91119,.F.); +#91119 = EDGE_CURVE('',#91120,#91112,#91122,.T.); +#91120 = VERTEX_POINT('',#91121); +#91121 = CARTESIAN_POINT('',(1.99,-0.125,2.E-02)); +#91122 = LINE('',#91123,#91124); +#91123 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91124 = VECTOR('',#91125,1.); +#91125 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91126 = ORIENTED_EDGE('',*,*,#91127,.T.); +#91127 = EDGE_CURVE('',#91120,#91128,#91130,.T.); +#91128 = VERTEX_POINT('',#91129); +#91129 = CARTESIAN_POINT('',(1.725,-0.125,2.E-02)); +#91130 = LINE('',#91131,#91132); +#91131 = CARTESIAN_POINT('',(-0.1325,-0.125,2.E-02)); +#91132 = VECTOR('',#91133,1.); +#91133 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91134 = ORIENTED_EDGE('',*,*,#91135,.T.); +#91135 = EDGE_CURVE('',#91128,#91136,#91138,.T.); +#91136 = VERTEX_POINT('',#91137); +#91137 = CARTESIAN_POINT('',(1.725,0.125,2.E-02)); +#91138 = CIRCLE('',#91139,0.125); +#91139 = AXIS2_PLACEMENT_3D('',#91140,#91141,#91142); +#91140 = CARTESIAN_POINT('',(1.725,-3.275157922644E-16,2.E-02)); +#91141 = DIRECTION('',(0.,0.,-1.)); +#91142 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91143 = ORIENTED_EDGE('',*,*,#91144,.T.); +#91144 = EDGE_CURVE('',#91136,#91145,#91147,.T.); +#91145 = VERTEX_POINT('',#91146); +#91146 = CARTESIAN_POINT('',(1.99,0.125,2.E-02)); +#91147 = LINE('',#91148,#91149); +#91148 = CARTESIAN_POINT('',(5.E-03,0.125,2.E-02)); +#91149 = VECTOR('',#91150,1.); +#91150 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91151 = ORIENTED_EDGE('',*,*,#91152,.F.); +#91152 = EDGE_CURVE('',#91153,#91145,#91155,.T.); +#91153 = VERTEX_POINT('',#91154); +#91154 = CARTESIAN_POINT('',(1.99,0.375,2.E-02)); +#91155 = LINE('',#91156,#91157); +#91156 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91157 = VECTOR('',#91158,1.); +#91158 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91159 = ORIENTED_EDGE('',*,*,#91160,.T.); +#91160 = EDGE_CURVE('',#91153,#91161,#91163,.T.); +#91161 = VERTEX_POINT('',#91162); +#91162 = CARTESIAN_POINT('',(1.725,0.375,2.E-02)); +#91163 = LINE('',#91164,#91165); +#91164 = CARTESIAN_POINT('',(-0.1325,0.375,2.E-02)); +#91165 = VECTOR('',#91166,1.); +#91166 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91167 = ORIENTED_EDGE('',*,*,#91168,.T.); +#91168 = EDGE_CURVE('',#91161,#91169,#91171,.T.); +#91169 = VERTEX_POINT('',#91170); +#91170 = CARTESIAN_POINT('',(1.725,0.625,2.E-02)); +#91171 = CIRCLE('',#91172,0.125); +#91172 = AXIS2_PLACEMENT_3D('',#91173,#91174,#91175); +#91173 = CARTESIAN_POINT('',(1.725,0.5,2.E-02)); +#91174 = DIRECTION('',(0.,0.,-1.)); +#91175 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91176 = ORIENTED_EDGE('',*,*,#91177,.T.); +#91177 = EDGE_CURVE('',#91169,#91178,#91180,.T.); +#91178 = VERTEX_POINT('',#91179); +#91179 = CARTESIAN_POINT('',(1.99,0.625,2.E-02)); +#91180 = LINE('',#91181,#91182); +#91181 = CARTESIAN_POINT('',(5.E-03,0.625,2.E-02)); +#91182 = VECTOR('',#91183,1.); +#91183 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91184 = ORIENTED_EDGE('',*,*,#91185,.F.); +#91185 = EDGE_CURVE('',#91186,#91178,#91188,.T.); +#91186 = VERTEX_POINT('',#91187); +#91187 = CARTESIAN_POINT('',(1.99,0.875,2.E-02)); +#91188 = LINE('',#91189,#91190); +#91189 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91190 = VECTOR('',#91191,1.); +#91191 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91192 = ORIENTED_EDGE('',*,*,#91193,.T.); +#91193 = EDGE_CURVE('',#91186,#91194,#91196,.T.); +#91194 = VERTEX_POINT('',#91195); +#91195 = CARTESIAN_POINT('',(1.725,0.875,2.E-02)); +#91196 = LINE('',#91197,#91198); +#91197 = CARTESIAN_POINT('',(-0.1325,0.875,2.E-02)); +#91198 = VECTOR('',#91199,1.); +#91199 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91200 = ORIENTED_EDGE('',*,*,#91201,.T.); +#91201 = EDGE_CURVE('',#91194,#91202,#91204,.T.); +#91202 = VERTEX_POINT('',#91203); +#91203 = CARTESIAN_POINT('',(1.725,1.125,2.E-02)); +#91204 = CIRCLE('',#91205,0.125); +#91205 = AXIS2_PLACEMENT_3D('',#91206,#91207,#91208); +#91206 = CARTESIAN_POINT('',(1.725,1.,2.E-02)); +#91207 = DIRECTION('',(0.,0.,-1.)); +#91208 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91209 = ORIENTED_EDGE('',*,*,#91210,.T.); +#91210 = EDGE_CURVE('',#91202,#91211,#91213,.T.); +#91211 = VERTEX_POINT('',#91212); +#91212 = CARTESIAN_POINT('',(1.99,1.125,2.E-02)); +#91213 = LINE('',#91214,#91215); +#91214 = CARTESIAN_POINT('',(5.E-03,1.125,2.E-02)); +#91215 = VECTOR('',#91216,1.); +#91216 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91217 = ORIENTED_EDGE('',*,*,#91218,.F.); +#91218 = EDGE_CURVE('',#91219,#91211,#91221,.T.); +#91219 = VERTEX_POINT('',#91220); +#91220 = CARTESIAN_POINT('',(1.99,1.375,2.E-02)); +#91221 = LINE('',#91222,#91223); +#91222 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91223 = VECTOR('',#91224,1.); +#91224 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91225 = ORIENTED_EDGE('',*,*,#91226,.T.); +#91226 = EDGE_CURVE('',#91219,#91227,#91229,.T.); +#91227 = VERTEX_POINT('',#91228); +#91228 = CARTESIAN_POINT('',(1.725,1.375,2.E-02)); +#91229 = LINE('',#91230,#91231); +#91230 = CARTESIAN_POINT('',(-0.1325,1.375,2.E-02)); +#91231 = VECTOR('',#91232,1.); +#91232 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#91233 = ORIENTED_EDGE('',*,*,#91234,.T.); +#91234 = EDGE_CURVE('',#91227,#91235,#91237,.T.); +#91235 = VERTEX_POINT('',#91236); +#91236 = CARTESIAN_POINT('',(1.725,1.625,2.E-02)); +#91237 = CIRCLE('',#91238,0.125); +#91238 = AXIS2_PLACEMENT_3D('',#91239,#91240,#91241); +#91239 = CARTESIAN_POINT('',(1.725,1.5,2.E-02)); +#91240 = DIRECTION('',(0.,0.,-1.)); +#91241 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#91242 = ORIENTED_EDGE('',*,*,#91243,.T.); +#91243 = EDGE_CURVE('',#91235,#91244,#91246,.T.); +#91244 = VERTEX_POINT('',#91245); +#91245 = CARTESIAN_POINT('',(1.99,1.625,2.E-02)); +#91246 = LINE('',#91247,#91248); +#91247 = CARTESIAN_POINT('',(5.E-03,1.625,2.E-02)); +#91248 = VECTOR('',#91249,1.); +#91249 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#91250 = ORIENTED_EDGE('',*,*,#91251,.F.); +#91251 = EDGE_CURVE('',#91252,#91244,#91254,.T.); +#91252 = VERTEX_POINT('',#91253); +#91253 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91254 = LINE('',#91255,#91256); +#91255 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91256 = VECTOR('',#91257,1.); +#91257 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91258 = ORIENTED_EDGE('',*,*,#91259,.F.); +#91259 = EDGE_CURVE('',#91260,#91252,#91262,.T.); +#91260 = VERTEX_POINT('',#91261); +#91261 = CARTESIAN_POINT('',(1.125,2.49,2.E-02)); +#91262 = LINE('',#91263,#91264); +#91263 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91264 = VECTOR('',#91265,1.); +#91265 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91266 = ORIENTED_EDGE('',*,*,#91267,.T.); +#91267 = EDGE_CURVE('',#91260,#91268,#91270,.T.); +#91268 = VERTEX_POINT('',#91269); +#91269 = CARTESIAN_POINT('',(1.125,2.225,2.E-02)); +#91270 = LINE('',#91271,#91272); +#91271 = CARTESIAN_POINT('',(1.125,2.3575,2.E-02)); +#91272 = VECTOR('',#91273,1.); +#91273 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91274 = ORIENTED_EDGE('',*,*,#91275,.T.); +#91275 = EDGE_CURVE('',#91268,#91276,#91278,.T.); +#91276 = VERTEX_POINT('',#91277); +#91277 = CARTESIAN_POINT('',(0.875,2.225,2.E-02)); +#91278 = CIRCLE('',#91279,0.125); +#91279 = AXIS2_PLACEMENT_3D('',#91280,#91281,#91282); +#91280 = CARTESIAN_POINT('',(1.,2.225,2.E-02)); +#91281 = DIRECTION('',(0.,0.,-1.)); +#91282 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91283 = ORIENTED_EDGE('',*,*,#91284,.T.); +#91284 = EDGE_CURVE('',#91276,#91285,#91287,.T.); +#91285 = VERTEX_POINT('',#91286); +#91286 = CARTESIAN_POINT('',(0.875,2.49,2.E-02)); +#91287 = LINE('',#91288,#91289); +#91288 = CARTESIAN_POINT('',(0.875,2.495,2.E-02)); +#91289 = VECTOR('',#91290,1.); +#91290 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91291 = ORIENTED_EDGE('',*,*,#91292,.F.); +#91292 = EDGE_CURVE('',#91293,#91285,#91295,.T.); +#91293 = VERTEX_POINT('',#91294); +#91294 = CARTESIAN_POINT('',(0.625,2.49,2.E-02)); +#91295 = LINE('',#91296,#91297); +#91296 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91297 = VECTOR('',#91298,1.); +#91298 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91299 = ORIENTED_EDGE('',*,*,#91300,.T.); +#91300 = EDGE_CURVE('',#91293,#91301,#91303,.T.); +#91301 = VERTEX_POINT('',#91302); +#91302 = CARTESIAN_POINT('',(0.625,2.225,2.E-02)); +#91303 = LINE('',#91304,#91305); +#91304 = CARTESIAN_POINT('',(0.625,2.3575,2.E-02)); +#91305 = VECTOR('',#91306,1.); +#91306 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91307 = ORIENTED_EDGE('',*,*,#91308,.T.); +#91308 = EDGE_CURVE('',#91301,#91309,#91311,.T.); +#91309 = VERTEX_POINT('',#91310); +#91310 = CARTESIAN_POINT('',(0.375,2.225,2.E-02)); +#91311 = CIRCLE('',#91312,0.125); +#91312 = AXIS2_PLACEMENT_3D('',#91313,#91314,#91315); +#91313 = CARTESIAN_POINT('',(0.5,2.225,2.E-02)); +#91314 = DIRECTION('',(0.,0.,-1.)); +#91315 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91316 = ORIENTED_EDGE('',*,*,#91317,.T.); +#91317 = EDGE_CURVE('',#91309,#91318,#91320,.T.); +#91318 = VERTEX_POINT('',#91319); +#91319 = CARTESIAN_POINT('',(0.375,2.49,2.E-02)); +#91320 = LINE('',#91321,#91322); +#91321 = CARTESIAN_POINT('',(0.375,2.495,2.E-02)); +#91322 = VECTOR('',#91323,1.); +#91323 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91324 = ORIENTED_EDGE('',*,*,#91325,.F.); +#91325 = EDGE_CURVE('',#91326,#91318,#91328,.T.); +#91326 = VERTEX_POINT('',#91327); +#91327 = CARTESIAN_POINT('',(0.125,2.49,2.E-02)); +#91328 = LINE('',#91329,#91330); +#91329 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91330 = VECTOR('',#91331,1.); +#91331 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91332 = ORIENTED_EDGE('',*,*,#91333,.T.); +#91333 = EDGE_CURVE('',#91326,#91334,#91336,.T.); +#91334 = VERTEX_POINT('',#91335); +#91335 = CARTESIAN_POINT('',(0.125,2.225,2.E-02)); +#91336 = LINE('',#91337,#91338); +#91337 = CARTESIAN_POINT('',(0.125,2.3575,2.E-02)); +#91338 = VECTOR('',#91339,1.); +#91339 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91340 = ORIENTED_EDGE('',*,*,#91341,.T.); +#91341 = EDGE_CURVE('',#91334,#91342,#91344,.T.); +#91342 = VERTEX_POINT('',#91343); +#91343 = CARTESIAN_POINT('',(-0.125,2.225,2.E-02)); +#91344 = CIRCLE('',#91345,0.125); +#91345 = AXIS2_PLACEMENT_3D('',#91346,#91347,#91348); +#91346 = CARTESIAN_POINT('',(6.883382752676E-16,2.225,2.E-02)); +#91347 = DIRECTION('',(0.,0.,-1.)); +#91348 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91349 = ORIENTED_EDGE('',*,*,#91350,.T.); +#91350 = EDGE_CURVE('',#91342,#91351,#91353,.T.); +#91351 = VERTEX_POINT('',#91352); +#91352 = CARTESIAN_POINT('',(-0.125,2.49,2.E-02)); +#91353 = LINE('',#91354,#91355); +#91354 = CARTESIAN_POINT('',(-0.125,2.495,2.E-02)); +#91355 = VECTOR('',#91356,1.); +#91356 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91357 = ORIENTED_EDGE('',*,*,#91358,.F.); +#91358 = EDGE_CURVE('',#91359,#91351,#91361,.T.); +#91359 = VERTEX_POINT('',#91360); +#91360 = CARTESIAN_POINT('',(-0.375,2.49,2.E-02)); +#91361 = LINE('',#91362,#91363); +#91362 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91363 = VECTOR('',#91364,1.); +#91364 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91365 = ORIENTED_EDGE('',*,*,#91366,.T.); +#91366 = EDGE_CURVE('',#91359,#91367,#91369,.T.); +#91367 = VERTEX_POINT('',#91368); +#91368 = CARTESIAN_POINT('',(-0.375,2.225,2.E-02)); +#91369 = LINE('',#91370,#91371); +#91370 = CARTESIAN_POINT('',(-0.375,2.3575,2.E-02)); +#91371 = VECTOR('',#91372,1.); +#91372 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91373 = ORIENTED_EDGE('',*,*,#91374,.T.); +#91374 = EDGE_CURVE('',#91367,#91375,#91377,.T.); +#91375 = VERTEX_POINT('',#91376); +#91376 = CARTESIAN_POINT('',(-0.625,2.225,2.E-02)); +#91377 = CIRCLE('',#91378,0.125); +#91378 = AXIS2_PLACEMENT_3D('',#91379,#91380,#91381); +#91379 = CARTESIAN_POINT('',(-0.5,2.225,2.E-02)); +#91380 = DIRECTION('',(0.,0.,-1.)); +#91381 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91382 = ORIENTED_EDGE('',*,*,#91383,.T.); +#91383 = EDGE_CURVE('',#91375,#91384,#91386,.T.); +#91384 = VERTEX_POINT('',#91385); +#91385 = CARTESIAN_POINT('',(-0.625,2.49,2.E-02)); +#91386 = LINE('',#91387,#91388); +#91387 = CARTESIAN_POINT('',(-0.625,2.495,2.E-02)); +#91388 = VECTOR('',#91389,1.); +#91389 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#91390 = ORIENTED_EDGE('',*,*,#91391,.F.); +#91391 = EDGE_CURVE('',#90546,#91384,#91392,.T.); +#91392 = LINE('',#91393,#91394); +#91393 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91394 = VECTOR('',#91395,1.); +#91395 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91396 = ORIENTED_EDGE('',*,*,#90545,.T.); +#91397 = ORIENTED_EDGE('',*,*,#90526,.T.); +#91398 = ORIENTED_EDGE('',*,*,#90496,.T.); +#91399 = FACE_BOUND('',#91400,.F.); +#91400 = EDGE_LOOP('',(#91401,#91411,#91419,#91427,#91435)); +#91401 = ORIENTED_EDGE('',*,*,#91402,.F.); +#91402 = EDGE_CURVE('',#91403,#91405,#91407,.T.); +#91403 = VERTEX_POINT('',#91404); +#91404 = CARTESIAN_POINT('',(-1.325,1.625,2.E-02)); +#91405 = VERTEX_POINT('',#91406); +#91406 = CARTESIAN_POINT('',(-1.325,-1.825,2.E-02)); +#91407 = LINE('',#91408,#91409); +#91408 = CARTESIAN_POINT('',(-1.325,1.625,2.E-02)); +#91409 = VECTOR('',#91410,1.); +#91410 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91411 = ORIENTED_EDGE('',*,*,#91412,.F.); +#91412 = EDGE_CURVE('',#91413,#91403,#91415,.T.); +#91413 = VERTEX_POINT('',#91414); +#91414 = CARTESIAN_POINT('',(-1.125,1.825,2.E-02)); +#91415 = LINE('',#91416,#91417); +#91416 = CARTESIAN_POINT('',(-1.125,1.825,2.E-02)); +#91417 = VECTOR('',#91418,1.); +#91418 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#91419 = ORIENTED_EDGE('',*,*,#91420,.F.); +#91420 = EDGE_CURVE('',#91421,#91413,#91423,.T.); +#91421 = VERTEX_POINT('',#91422); +#91422 = CARTESIAN_POINT('',(1.325,1.825,2.E-02)); +#91423 = LINE('',#91424,#91425); +#91424 = CARTESIAN_POINT('',(1.325,1.825,2.E-02)); +#91425 = VECTOR('',#91426,1.); +#91426 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#91427 = ORIENTED_EDGE('',*,*,#91428,.F.); +#91428 = EDGE_CURVE('',#91429,#91421,#91431,.T.); +#91429 = VERTEX_POINT('',#91430); +#91430 = CARTESIAN_POINT('',(1.325,-1.825,2.E-02)); +#91431 = LINE('',#91432,#91433); +#91432 = CARTESIAN_POINT('',(1.325,-1.825,2.E-02)); +#91433 = VECTOR('',#91434,1.); +#91434 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91435 = ORIENTED_EDGE('',*,*,#91436,.F.); +#91436 = EDGE_CURVE('',#91405,#91429,#91437,.T.); +#91437 = LINE('',#91438,#91439); +#91438 = CARTESIAN_POINT('',(-1.325,-1.825,2.E-02)); +#91439 = VECTOR('',#91440,1.); +#91440 = DIRECTION('',(1.,-1.382541879722E-16,0.)); +#91441 = PLANE('',#91442); +#91442 = AXIS2_PLACEMENT_3D('',#91443,#91444,#91445); +#91443 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91444 = DIRECTION('',(0.,0.,1.)); +#91445 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91446 = ADVANCED_FACE('',(#91447),#91573,.F.); +#91447 = FACE_BOUND('',#91448,.F.); +#91448 = EDGE_LOOP('',(#91449,#91459,#91465,#91466,#91467,#91473,#91474, + #91475,#91483,#91491,#91497,#91498,#91506,#91514,#91520,#91521, + #91529,#91537,#91543,#91544,#91552,#91560,#91566,#91567)); +#91449 = ORIENTED_EDGE('',*,*,#91450,.F.); +#91450 = EDGE_CURVE('',#91451,#91453,#91455,.T.); +#91451 = VERTEX_POINT('',#91452); +#91452 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#91453 = VERTEX_POINT('',#91454); +#91454 = CARTESIAN_POINT('',(1.99,2.49,0.77)); +#91455 = LINE('',#91456,#91457); +#91456 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#91457 = VECTOR('',#91458,1.); +#91458 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91459 = ORIENTED_EDGE('',*,*,#91460,.F.); +#91460 = EDGE_CURVE('',#90601,#91451,#91461,.T.); +#91461 = LINE('',#91462,#91463); +#91462 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91463 = VECTOR('',#91464,1.); +#91464 = DIRECTION('',(0.,0.,1.)); +#91465 = ORIENTED_EDGE('',*,*,#90600,.T.); +#91466 = ORIENTED_EDGE('',*,*,#90488,.T.); +#91467 = ORIENTED_EDGE('',*,*,#91468,.T.); +#91468 = EDGE_CURVE('',#90481,#90554,#91469,.T.); +#91469 = LINE('',#91470,#91471); +#91470 = CARTESIAN_POINT('',(-1.5575,2.49,0.2)); +#91471 = VECTOR('',#91472,1.); +#91472 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91473 = ORIENTED_EDGE('',*,*,#90553,.T.); +#91474 = ORIENTED_EDGE('',*,*,#91391,.T.); +#91475 = ORIENTED_EDGE('',*,*,#91476,.T.); +#91476 = EDGE_CURVE('',#91384,#91477,#91479,.T.); +#91477 = VERTEX_POINT('',#91478); +#91478 = CARTESIAN_POINT('',(-0.625,2.49,0.2)); +#91479 = LINE('',#91480,#91481); +#91480 = CARTESIAN_POINT('',(-0.625,2.49,1.E-02)); +#91481 = VECTOR('',#91482,1.); +#91482 = DIRECTION('',(0.,0.,1.)); +#91483 = ORIENTED_EDGE('',*,*,#91484,.T.); +#91484 = EDGE_CURVE('',#91477,#91485,#91487,.T.); +#91485 = VERTEX_POINT('',#91486); +#91486 = CARTESIAN_POINT('',(-0.375,2.49,0.2)); +#91487 = LINE('',#91488,#91489); +#91488 = CARTESIAN_POINT('',(-1.3075,2.49,0.2)); +#91489 = VECTOR('',#91490,1.); +#91490 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91491 = ORIENTED_EDGE('',*,*,#91492,.T.); +#91492 = EDGE_CURVE('',#91485,#91359,#91493,.T.); +#91493 = LINE('',#91494,#91495); +#91494 = CARTESIAN_POINT('',(-0.375,2.49,1.E-02)); +#91495 = VECTOR('',#91496,1.); +#91496 = DIRECTION('',(-0.,0.,-1.)); +#91497 = ORIENTED_EDGE('',*,*,#91358,.T.); +#91498 = ORIENTED_EDGE('',*,*,#91499,.T.); +#91499 = EDGE_CURVE('',#91351,#91500,#91502,.T.); +#91500 = VERTEX_POINT('',#91501); +#91501 = CARTESIAN_POINT('',(-0.125,2.49,0.2)); +#91502 = LINE('',#91503,#91504); +#91503 = CARTESIAN_POINT('',(-0.125,2.49,1.E-02)); +#91504 = VECTOR('',#91505,1.); +#91505 = DIRECTION('',(0.,0.,1.)); +#91506 = ORIENTED_EDGE('',*,*,#91507,.T.); +#91507 = EDGE_CURVE('',#91500,#91508,#91510,.T.); +#91508 = VERTEX_POINT('',#91509); +#91509 = CARTESIAN_POINT('',(0.125,2.49,0.2)); +#91510 = LINE('',#91511,#91512); +#91511 = CARTESIAN_POINT('',(-1.0575,2.49,0.2)); +#91512 = VECTOR('',#91513,1.); +#91513 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91514 = ORIENTED_EDGE('',*,*,#91515,.T.); +#91515 = EDGE_CURVE('',#91508,#91326,#91516,.T.); +#91516 = LINE('',#91517,#91518); +#91517 = CARTESIAN_POINT('',(0.125,2.49,1.E-02)); +#91518 = VECTOR('',#91519,1.); +#91519 = DIRECTION('',(-0.,0.,-1.)); +#91520 = ORIENTED_EDGE('',*,*,#91325,.T.); +#91521 = ORIENTED_EDGE('',*,*,#91522,.T.); +#91522 = EDGE_CURVE('',#91318,#91523,#91525,.T.); +#91523 = VERTEX_POINT('',#91524); +#91524 = CARTESIAN_POINT('',(0.375,2.49,0.2)); +#91525 = LINE('',#91526,#91527); +#91526 = CARTESIAN_POINT('',(0.375,2.49,1.E-02)); +#91527 = VECTOR('',#91528,1.); +#91528 = DIRECTION('',(0.,0.,1.)); +#91529 = ORIENTED_EDGE('',*,*,#91530,.T.); +#91530 = EDGE_CURVE('',#91523,#91531,#91533,.T.); +#91531 = VERTEX_POINT('',#91532); +#91532 = CARTESIAN_POINT('',(0.625,2.49,0.2)); +#91533 = LINE('',#91534,#91535); +#91534 = CARTESIAN_POINT('',(-0.8075,2.49,0.2)); +#91535 = VECTOR('',#91536,1.); +#91536 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91537 = ORIENTED_EDGE('',*,*,#91538,.T.); +#91538 = EDGE_CURVE('',#91531,#91293,#91539,.T.); +#91539 = LINE('',#91540,#91541); +#91540 = CARTESIAN_POINT('',(0.625,2.49,1.E-02)); +#91541 = VECTOR('',#91542,1.); +#91542 = DIRECTION('',(-0.,0.,-1.)); +#91543 = ORIENTED_EDGE('',*,*,#91292,.T.); +#91544 = ORIENTED_EDGE('',*,*,#91545,.T.); +#91545 = EDGE_CURVE('',#91285,#91546,#91548,.T.); +#91546 = VERTEX_POINT('',#91547); +#91547 = CARTESIAN_POINT('',(0.875,2.49,0.2)); +#91548 = LINE('',#91549,#91550); +#91549 = CARTESIAN_POINT('',(0.875,2.49,1.E-02)); +#91550 = VECTOR('',#91551,1.); +#91551 = DIRECTION('',(0.,0.,1.)); +#91552 = ORIENTED_EDGE('',*,*,#91553,.T.); +#91553 = EDGE_CURVE('',#91546,#91554,#91556,.T.); +#91554 = VERTEX_POINT('',#91555); +#91555 = CARTESIAN_POINT('',(1.125,2.49,0.2)); +#91556 = LINE('',#91557,#91558); +#91557 = CARTESIAN_POINT('',(-0.5575,2.49,0.2)); +#91558 = VECTOR('',#91559,1.); +#91559 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91560 = ORIENTED_EDGE('',*,*,#91561,.T.); +#91561 = EDGE_CURVE('',#91554,#91260,#91562,.T.); +#91562 = LINE('',#91563,#91564); +#91563 = CARTESIAN_POINT('',(1.125,2.49,1.E-02)); +#91564 = VECTOR('',#91565,1.); +#91565 = DIRECTION('',(-0.,0.,-1.)); +#91566 = ORIENTED_EDGE('',*,*,#91259,.T.); +#91567 = ORIENTED_EDGE('',*,*,#91568,.T.); +#91568 = EDGE_CURVE('',#91252,#91453,#91569,.T.); +#91569 = LINE('',#91570,#91571); +#91570 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#91571 = VECTOR('',#91572,1.); +#91572 = DIRECTION('',(0.,0.,1.)); +#91573 = PLANE('',#91574); +#91574 = AXIS2_PLACEMENT_3D('',#91575,#91576,#91577); +#91575 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91576 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91577 = DIRECTION('',(0.,0.,1.)); +#91578 = ADVANCED_FACE('',(#91579),#91585,.F.); +#91579 = FACE_BOUND('',#91580,.F.); +#91580 = EDGE_LOOP('',(#91581,#91582,#91583,#91584)); +#91581 = ORIENTED_EDGE('',*,*,#90480,.F.); +#91582 = ORIENTED_EDGE('',*,*,#90584,.F.); +#91583 = ORIENTED_EDGE('',*,*,#90561,.F.); +#91584 = ORIENTED_EDGE('',*,*,#91468,.F.); +#91585 = PLANE('',#91586); +#91586 = AXIS2_PLACEMENT_3D('',#91587,#91588,#91589); +#91587 = CARTESIAN_POINT('',(-1.125,2.5,0.2)); +#91588 = DIRECTION('',(-0.,0.,-1.)); +#91589 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#91590 = ADVANCED_FACE('',(#91591),#91770,.F.); +#91591 = FACE_BOUND('',#91592,.F.); +#91592 = EDGE_LOOP('',(#91593,#91594,#91595,#91603,#91609,#91610,#91618, + #91626,#91632,#91633,#91641,#91649,#91655,#91656,#91664,#91672, + #91678,#91679,#91687,#91695,#91701,#91702,#91710,#91718,#91724, + #91725,#91733,#91741,#91747,#91748,#91756,#91764)); +#91593 = ORIENTED_EDGE('',*,*,#90608,.F.); +#91594 = ORIENTED_EDGE('',*,*,#91460,.T.); +#91595 = ORIENTED_EDGE('',*,*,#91596,.T.); +#91596 = EDGE_CURVE('',#91451,#91597,#91599,.T.); +#91597 = VERTEX_POINT('',#91598); +#91598 = CARTESIAN_POINT('',(-1.99,-2.49,0.77)); +#91599 = LINE('',#91600,#91601); +#91600 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#91601 = VECTOR('',#91602,1.); +#91602 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#91603 = ORIENTED_EDGE('',*,*,#91604,.F.); +#91604 = EDGE_CURVE('',#90840,#91597,#91605,.T.); +#91605 = LINE('',#91606,#91607); +#91606 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#91607 = VECTOR('',#91608,1.); +#91608 = DIRECTION('',(0.,0.,1.)); +#91609 = ORIENTED_EDGE('',*,*,#90839,.F.); +#91610 = ORIENTED_EDGE('',*,*,#91611,.T.); +#91611 = EDGE_CURVE('',#90832,#91612,#91614,.T.); +#91612 = VERTEX_POINT('',#91613); +#91613 = CARTESIAN_POINT('',(-1.99,-1.625,0.2)); +#91614 = LINE('',#91615,#91616); +#91615 = CARTESIAN_POINT('',(-1.99,-1.625,1.E-02)); +#91616 = VECTOR('',#91617,1.); +#91617 = DIRECTION('',(0.,0.,1.)); +#91618 = ORIENTED_EDGE('',*,*,#91619,.T.); +#91619 = EDGE_CURVE('',#91612,#91620,#91622,.T.); +#91620 = VERTEX_POINT('',#91621); +#91621 = CARTESIAN_POINT('',(-1.99,-1.375,0.2)); +#91622 = LINE('',#91623,#91624); +#91623 = CARTESIAN_POINT('',(-1.99,0.4325,0.2)); +#91624 = VECTOR('',#91625,1.); +#91625 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91626 = ORIENTED_EDGE('',*,*,#91627,.T.); +#91627 = EDGE_CURVE('',#91620,#90807,#91628,.T.); +#91628 = LINE('',#91629,#91630); +#91629 = CARTESIAN_POINT('',(-1.99,-1.375,1.E-02)); +#91630 = VECTOR('',#91631,1.); +#91631 = DIRECTION('',(0.,-0.,-1.)); +#91632 = ORIENTED_EDGE('',*,*,#90806,.F.); +#91633 = ORIENTED_EDGE('',*,*,#91634,.T.); +#91634 = EDGE_CURVE('',#90799,#91635,#91637,.T.); +#91635 = VERTEX_POINT('',#91636); +#91636 = CARTESIAN_POINT('',(-1.99,-1.125,0.2)); +#91637 = LINE('',#91638,#91639); +#91638 = CARTESIAN_POINT('',(-1.99,-1.125,1.E-02)); +#91639 = VECTOR('',#91640,1.); +#91640 = DIRECTION('',(0.,0.,1.)); +#91641 = ORIENTED_EDGE('',*,*,#91642,.T.); +#91642 = EDGE_CURVE('',#91635,#91643,#91645,.T.); +#91643 = VERTEX_POINT('',#91644); +#91644 = CARTESIAN_POINT('',(-1.99,-0.875,0.2)); +#91645 = LINE('',#91646,#91647); +#91646 = CARTESIAN_POINT('',(-1.99,0.6825,0.2)); +#91647 = VECTOR('',#91648,1.); +#91648 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91649 = ORIENTED_EDGE('',*,*,#91650,.T.); +#91650 = EDGE_CURVE('',#91643,#90774,#91651,.T.); +#91651 = LINE('',#91652,#91653); +#91652 = CARTESIAN_POINT('',(-1.99,-0.875,1.E-02)); +#91653 = VECTOR('',#91654,1.); +#91654 = DIRECTION('',(0.,-0.,-1.)); +#91655 = ORIENTED_EDGE('',*,*,#90773,.F.); +#91656 = ORIENTED_EDGE('',*,*,#91657,.T.); +#91657 = EDGE_CURVE('',#90766,#91658,#91660,.T.); +#91658 = VERTEX_POINT('',#91659); +#91659 = CARTESIAN_POINT('',(-1.99,-0.625,0.2)); +#91660 = LINE('',#91661,#91662); +#91661 = CARTESIAN_POINT('',(-1.99,-0.625,1.E-02)); +#91662 = VECTOR('',#91663,1.); +#91663 = DIRECTION('',(0.,0.,1.)); +#91664 = ORIENTED_EDGE('',*,*,#91665,.T.); +#91665 = EDGE_CURVE('',#91658,#91666,#91668,.T.); +#91666 = VERTEX_POINT('',#91667); +#91667 = CARTESIAN_POINT('',(-1.99,-0.375,0.2)); +#91668 = LINE('',#91669,#91670); +#91669 = CARTESIAN_POINT('',(-1.99,0.9325,0.2)); +#91670 = VECTOR('',#91671,1.); +#91671 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91672 = ORIENTED_EDGE('',*,*,#91673,.T.); +#91673 = EDGE_CURVE('',#91666,#90741,#91674,.T.); +#91674 = LINE('',#91675,#91676); +#91675 = CARTESIAN_POINT('',(-1.99,-0.375,1.E-02)); +#91676 = VECTOR('',#91677,1.); +#91677 = DIRECTION('',(0.,-0.,-1.)); +#91678 = ORIENTED_EDGE('',*,*,#90740,.F.); +#91679 = ORIENTED_EDGE('',*,*,#91680,.T.); +#91680 = EDGE_CURVE('',#90733,#91681,#91683,.T.); +#91681 = VERTEX_POINT('',#91682); +#91682 = CARTESIAN_POINT('',(-1.99,-0.125,0.2)); +#91683 = LINE('',#91684,#91685); +#91684 = CARTESIAN_POINT('',(-1.99,-0.125,1.E-02)); +#91685 = VECTOR('',#91686,1.); +#91686 = DIRECTION('',(0.,0.,1.)); +#91687 = ORIENTED_EDGE('',*,*,#91688,.T.); +#91688 = EDGE_CURVE('',#91681,#91689,#91691,.T.); +#91689 = VERTEX_POINT('',#91690); +#91690 = CARTESIAN_POINT('',(-1.99,0.125,0.2)); +#91691 = LINE('',#91692,#91693); +#91692 = CARTESIAN_POINT('',(-1.99,1.1825,0.2)); +#91693 = VECTOR('',#91694,1.); +#91694 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91695 = ORIENTED_EDGE('',*,*,#91696,.T.); +#91696 = EDGE_CURVE('',#91689,#90708,#91697,.T.); +#91697 = LINE('',#91698,#91699); +#91698 = CARTESIAN_POINT('',(-1.99,0.125,1.E-02)); +#91699 = VECTOR('',#91700,1.); +#91700 = DIRECTION('',(0.,-0.,-1.)); +#91701 = ORIENTED_EDGE('',*,*,#90707,.F.); +#91702 = ORIENTED_EDGE('',*,*,#91703,.T.); +#91703 = EDGE_CURVE('',#90700,#91704,#91706,.T.); +#91704 = VERTEX_POINT('',#91705); +#91705 = CARTESIAN_POINT('',(-1.99,0.375,0.2)); +#91706 = LINE('',#91707,#91708); +#91707 = CARTESIAN_POINT('',(-1.99,0.375,1.E-02)); +#91708 = VECTOR('',#91709,1.); +#91709 = DIRECTION('',(0.,0.,1.)); +#91710 = ORIENTED_EDGE('',*,*,#91711,.T.); +#91711 = EDGE_CURVE('',#91704,#91712,#91714,.T.); +#91712 = VERTEX_POINT('',#91713); +#91713 = CARTESIAN_POINT('',(-1.99,0.625,0.2)); +#91714 = LINE('',#91715,#91716); +#91715 = CARTESIAN_POINT('',(-1.99,1.4325,0.2)); +#91716 = VECTOR('',#91717,1.); +#91717 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91718 = ORIENTED_EDGE('',*,*,#91719,.T.); +#91719 = EDGE_CURVE('',#91712,#90675,#91720,.T.); +#91720 = LINE('',#91721,#91722); +#91721 = CARTESIAN_POINT('',(-1.99,0.625,1.E-02)); +#91722 = VECTOR('',#91723,1.); +#91723 = DIRECTION('',(0.,-0.,-1.)); +#91724 = ORIENTED_EDGE('',*,*,#90674,.F.); +#91725 = ORIENTED_EDGE('',*,*,#91726,.T.); +#91726 = EDGE_CURVE('',#90667,#91727,#91729,.T.); +#91727 = VERTEX_POINT('',#91728); +#91728 = CARTESIAN_POINT('',(-1.99,0.875,0.2)); +#91729 = LINE('',#91730,#91731); +#91730 = CARTESIAN_POINT('',(-1.99,0.875,1.E-02)); +#91731 = VECTOR('',#91732,1.); +#91732 = DIRECTION('',(0.,0.,1.)); +#91733 = ORIENTED_EDGE('',*,*,#91734,.T.); +#91734 = EDGE_CURVE('',#91727,#91735,#91737,.T.); +#91735 = VERTEX_POINT('',#91736); +#91736 = CARTESIAN_POINT('',(-1.99,1.125,0.2)); +#91737 = LINE('',#91738,#91739); +#91738 = CARTESIAN_POINT('',(-1.99,1.6825,0.2)); +#91739 = VECTOR('',#91740,1.); +#91740 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91741 = ORIENTED_EDGE('',*,*,#91742,.T.); +#91742 = EDGE_CURVE('',#91735,#90642,#91743,.T.); +#91743 = LINE('',#91744,#91745); +#91744 = CARTESIAN_POINT('',(-1.99,1.125,1.E-02)); +#91745 = VECTOR('',#91746,1.); +#91746 = DIRECTION('',(0.,-0.,-1.)); +#91747 = ORIENTED_EDGE('',*,*,#90641,.F.); +#91748 = ORIENTED_EDGE('',*,*,#91749,.T.); +#91749 = EDGE_CURVE('',#90634,#91750,#91752,.T.); +#91750 = VERTEX_POINT('',#91751); +#91751 = CARTESIAN_POINT('',(-1.99,1.375,0.2)); +#91752 = LINE('',#91753,#91754); +#91753 = CARTESIAN_POINT('',(-1.99,1.375,1.E-02)); +#91754 = VECTOR('',#91755,1.); +#91755 = DIRECTION('',(0.,0.,1.)); +#91756 = ORIENTED_EDGE('',*,*,#91757,.T.); +#91757 = EDGE_CURVE('',#91750,#91758,#91760,.T.); +#91758 = VERTEX_POINT('',#91759); +#91759 = CARTESIAN_POINT('',(-1.99,1.625,0.2)); +#91760 = LINE('',#91761,#91762); +#91761 = CARTESIAN_POINT('',(-1.99,1.9325,0.2)); +#91762 = VECTOR('',#91763,1.); +#91763 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#91764 = ORIENTED_EDGE('',*,*,#91765,.T.); +#91765 = EDGE_CURVE('',#91758,#90609,#91766,.T.); +#91766 = LINE('',#91767,#91768); +#91767 = CARTESIAN_POINT('',(-1.99,1.625,1.E-02)); +#91768 = VECTOR('',#91769,1.); +#91769 = DIRECTION('',(0.,-0.,-1.)); +#91770 = PLANE('',#91771); +#91771 = AXIS2_PLACEMENT_3D('',#91772,#91773,#91774); +#91772 = CARTESIAN_POINT('',(-1.99,2.49,2.E-02)); +#91773 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#91774 = DIRECTION('',(0.,0.,1.)); +#91775 = ADVANCED_FACE('',(#91776),#91810,.F.); +#91776 = FACE_BOUND('',#91777,.F.); +#91777 = EDGE_LOOP('',(#91778,#91788,#91794,#91795,#91796,#91804)); +#91778 = ORIENTED_EDGE('',*,*,#91779,.F.); +#91779 = EDGE_CURVE('',#91780,#91782,#91784,.T.); +#91780 = VERTEX_POINT('',#91781); +#91781 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91782 = VERTEX_POINT('',#91783); +#91783 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#91784 = LINE('',#91785,#91786); +#91785 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91786 = VECTOR('',#91787,1.); +#91787 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91788 = ORIENTED_EDGE('',*,*,#91789,.T.); +#91789 = EDGE_CURVE('',#91780,#90617,#91790,.T.); +#91790 = LINE('',#91791,#91792); +#91791 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91792 = VECTOR('',#91793,1.); +#91793 = DIRECTION('',(0.,0.,1.)); +#91794 = ORIENTED_EDGE('',*,*,#90616,.F.); +#91795 = ORIENTED_EDGE('',*,*,#91765,.F.); +#91796 = ORIENTED_EDGE('',*,*,#91797,.T.); +#91797 = EDGE_CURVE('',#91758,#91798,#91800,.T.); +#91798 = VERTEX_POINT('',#91799); +#91799 = CARTESIAN_POINT('',(-2.,1.625,0.2)); +#91800 = LINE('',#91801,#91802); +#91801 = CARTESIAN_POINT('',(-1.725,1.625,0.2)); +#91802 = VECTOR('',#91803,1.); +#91803 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91804 = ORIENTED_EDGE('',*,*,#91805,.F.); +#91805 = EDGE_CURVE('',#91782,#91798,#91806,.T.); +#91806 = LINE('',#91807,#91808); +#91807 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#91808 = VECTOR('',#91809,1.); +#91809 = DIRECTION('',(0.,0.,1.)); +#91810 = PLANE('',#91811); +#91811 = AXIS2_PLACEMENT_3D('',#91812,#91813,#91814); +#91812 = CARTESIAN_POINT('',(-1.725,1.625,0.)); +#91813 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91814 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91815 = ADVANCED_FACE('',(#91816),#91835,.T.); +#91816 = FACE_BOUND('',#91817,.T.); +#91817 = EDGE_LOOP('',(#91818,#91819,#91820,#91828)); +#91818 = ORIENTED_EDGE('',*,*,#91789,.T.); +#91819 = ORIENTED_EDGE('',*,*,#90624,.T.); +#91820 = ORIENTED_EDGE('',*,*,#91821,.F.); +#91821 = EDGE_CURVE('',#91822,#90625,#91824,.T.); +#91822 = VERTEX_POINT('',#91823); +#91823 = CARTESIAN_POINT('',(-1.725,1.375,0.)); +#91824 = LINE('',#91825,#91826); +#91825 = CARTESIAN_POINT('',(-1.725,1.375,0.)); +#91826 = VECTOR('',#91827,1.); +#91827 = DIRECTION('',(0.,0.,1.)); +#91828 = ORIENTED_EDGE('',*,*,#91829,.T.); +#91829 = EDGE_CURVE('',#91822,#91780,#91830,.T.); +#91830 = CIRCLE('',#91831,0.125); +#91831 = AXIS2_PLACEMENT_3D('',#91832,#91833,#91834); +#91832 = CARTESIAN_POINT('',(-1.725,1.5,0.)); +#91833 = DIRECTION('',(0.,0.,1.)); +#91834 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91835 = CYLINDRICAL_SURFACE('',#91836,0.125); +#91836 = AXIS2_PLACEMENT_3D('',#91837,#91838,#91839); +#91837 = CARTESIAN_POINT('',(-1.725,1.5,0.)); +#91838 = DIRECTION('',(0.,0.,-1.)); +#91839 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#91840 = ADVANCED_FACE('',(#91841),#91868,.F.); +#91841 = FACE_BOUND('',#91842,.F.); +#91842 = EDGE_LOOP('',(#91843,#91851,#91859,#91865,#91866,#91867)); +#91843 = ORIENTED_EDGE('',*,*,#91844,.F.); +#91844 = EDGE_CURVE('',#91845,#91822,#91847,.T.); +#91845 = VERTEX_POINT('',#91846); +#91846 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91847 = LINE('',#91848,#91849); +#91848 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91849 = VECTOR('',#91850,1.); +#91850 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#91851 = ORIENTED_EDGE('',*,*,#91852,.T.); +#91852 = EDGE_CURVE('',#91845,#91853,#91855,.T.); +#91853 = VERTEX_POINT('',#91854); +#91854 = CARTESIAN_POINT('',(-2.,1.375,0.2)); +#91855 = LINE('',#91856,#91857); +#91856 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91857 = VECTOR('',#91858,1.); +#91858 = DIRECTION('',(0.,0.,1.)); +#91859 = ORIENTED_EDGE('',*,*,#91860,.T.); +#91860 = EDGE_CURVE('',#91853,#91750,#91861,.T.); +#91861 = LINE('',#91862,#91863); +#91862 = CARTESIAN_POINT('',(-2.,1.375,0.2)); +#91863 = VECTOR('',#91864,1.); +#91864 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#91865 = ORIENTED_EDGE('',*,*,#91749,.F.); +#91866 = ORIENTED_EDGE('',*,*,#90633,.F.); +#91867 = ORIENTED_EDGE('',*,*,#91821,.F.); +#91868 = PLANE('',#91869); +#91869 = AXIS2_PLACEMENT_3D('',#91870,#91871,#91872); +#91870 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#91871 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#91872 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#91873 = ADVANCED_FACE('',(#91874),#91908,.F.); +#91874 = FACE_BOUND('',#91875,.F.); +#91875 = EDGE_LOOP('',(#91876,#91886,#91894,#91900,#91901,#91902)); +#91876 = ORIENTED_EDGE('',*,*,#91877,.F.); +#91877 = EDGE_CURVE('',#91878,#91880,#91882,.T.); +#91878 = VERTEX_POINT('',#91879); +#91879 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91880 = VERTEX_POINT('',#91881); +#91881 = CARTESIAN_POINT('',(-0.625,2.225,0.)); +#91882 = LINE('',#91883,#91884); +#91883 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91884 = VECTOR('',#91885,1.); +#91885 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91886 = ORIENTED_EDGE('',*,*,#91887,.T.); +#91887 = EDGE_CURVE('',#91878,#91888,#91890,.T.); +#91888 = VERTEX_POINT('',#91889); +#91889 = CARTESIAN_POINT('',(-0.625,2.5,0.2)); +#91890 = LINE('',#91891,#91892); +#91891 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91892 = VECTOR('',#91893,1.); +#91893 = DIRECTION('',(0.,0.,1.)); +#91894 = ORIENTED_EDGE('',*,*,#91895,.T.); +#91895 = EDGE_CURVE('',#91888,#91477,#91896,.T.); +#91896 = LINE('',#91897,#91898); +#91897 = CARTESIAN_POINT('',(-0.625,2.5,0.2)); +#91898 = VECTOR('',#91899,1.); +#91899 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91900 = ORIENTED_EDGE('',*,*,#91476,.F.); +#91901 = ORIENTED_EDGE('',*,*,#91383,.F.); +#91902 = ORIENTED_EDGE('',*,*,#91903,.F.); +#91903 = EDGE_CURVE('',#91880,#91375,#91904,.T.); +#91904 = LINE('',#91905,#91906); +#91905 = CARTESIAN_POINT('',(-0.625,2.225,0.)); +#91906 = VECTOR('',#91907,1.); +#91907 = DIRECTION('',(0.,0.,1.)); +#91908 = PLANE('',#91909); +#91909 = AXIS2_PLACEMENT_3D('',#91910,#91911,#91912); +#91910 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#91911 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#91912 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#91913 = ADVANCED_FACE('',(#91914),#91948,.F.); +#91914 = FACE_BOUND('',#91915,.F.); +#91915 = EDGE_LOOP('',(#91916,#91926,#91932,#91933,#91934,#91942)); +#91916 = ORIENTED_EDGE('',*,*,#91917,.F.); +#91917 = EDGE_CURVE('',#91918,#91920,#91922,.T.); +#91918 = VERTEX_POINT('',#91919); +#91919 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91920 = VERTEX_POINT('',#91921); +#91921 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#91922 = LINE('',#91923,#91924); +#91923 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91924 = VECTOR('',#91925,1.); +#91925 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91926 = ORIENTED_EDGE('',*,*,#91927,.T.); +#91927 = EDGE_CURVE('',#91918,#90650,#91928,.T.); +#91928 = LINE('',#91929,#91930); +#91929 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91930 = VECTOR('',#91931,1.); +#91931 = DIRECTION('',(0.,0.,1.)); +#91932 = ORIENTED_EDGE('',*,*,#90649,.F.); +#91933 = ORIENTED_EDGE('',*,*,#91742,.F.); +#91934 = ORIENTED_EDGE('',*,*,#91935,.T.); +#91935 = EDGE_CURVE('',#91735,#91936,#91938,.T.); +#91936 = VERTEX_POINT('',#91937); +#91937 = CARTESIAN_POINT('',(-2.,1.125,0.2)); +#91938 = LINE('',#91939,#91940); +#91939 = CARTESIAN_POINT('',(-1.725,1.125,0.2)); +#91940 = VECTOR('',#91941,1.); +#91941 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91942 = ORIENTED_EDGE('',*,*,#91943,.F.); +#91943 = EDGE_CURVE('',#91920,#91936,#91944,.T.); +#91944 = LINE('',#91945,#91946); +#91945 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#91946 = VECTOR('',#91947,1.); +#91947 = DIRECTION('',(0.,0.,1.)); +#91948 = PLANE('',#91949); +#91949 = AXIS2_PLACEMENT_3D('',#91950,#91951,#91952); +#91950 = CARTESIAN_POINT('',(-1.725,1.125,0.)); +#91951 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91952 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#91953 = ADVANCED_FACE('',(#91954),#91973,.T.); +#91954 = FACE_BOUND('',#91955,.T.); +#91955 = EDGE_LOOP('',(#91956,#91964,#91965,#91966)); +#91956 = ORIENTED_EDGE('',*,*,#91957,.T.); +#91957 = EDGE_CURVE('',#91958,#91367,#91960,.T.); +#91958 = VERTEX_POINT('',#91959); +#91959 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#91960 = LINE('',#91961,#91962); +#91961 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#91962 = VECTOR('',#91963,1.); +#91963 = DIRECTION('',(0.,0.,1.)); +#91964 = ORIENTED_EDGE('',*,*,#91374,.T.); +#91965 = ORIENTED_EDGE('',*,*,#91903,.F.); +#91966 = ORIENTED_EDGE('',*,*,#91967,.T.); +#91967 = EDGE_CURVE('',#91880,#91958,#91968,.T.); +#91968 = CIRCLE('',#91969,0.125); +#91969 = AXIS2_PLACEMENT_3D('',#91970,#91971,#91972); +#91970 = CARTESIAN_POINT('',(-0.5,2.225,0.)); +#91971 = DIRECTION('',(0.,0.,1.)); +#91972 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91973 = CYLINDRICAL_SURFACE('',#91974,0.125); +#91974 = AXIS2_PLACEMENT_3D('',#91975,#91976,#91977); +#91975 = CARTESIAN_POINT('',(-0.5,2.225,0.)); +#91976 = DIRECTION('',(0.,0.,-1.)); +#91977 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#91978 = ADVANCED_FACE('',(#91979),#91998,.T.); +#91979 = FACE_BOUND('',#91980,.T.); +#91980 = EDGE_LOOP('',(#91981,#91982,#91983,#91991)); +#91981 = ORIENTED_EDGE('',*,*,#91927,.T.); +#91982 = ORIENTED_EDGE('',*,*,#90657,.T.); +#91983 = ORIENTED_EDGE('',*,*,#91984,.F.); +#91984 = EDGE_CURVE('',#91985,#90658,#91987,.T.); +#91985 = VERTEX_POINT('',#91986); +#91986 = CARTESIAN_POINT('',(-1.725,0.875,0.)); +#91987 = LINE('',#91988,#91989); +#91988 = CARTESIAN_POINT('',(-1.725,0.875,0.)); +#91989 = VECTOR('',#91990,1.); +#91990 = DIRECTION('',(0.,0.,1.)); +#91991 = ORIENTED_EDGE('',*,*,#91992,.T.); +#91992 = EDGE_CURVE('',#91985,#91918,#91993,.T.); +#91993 = CIRCLE('',#91994,0.125); +#91994 = AXIS2_PLACEMENT_3D('',#91995,#91996,#91997); +#91995 = CARTESIAN_POINT('',(-1.725,1.,0.)); +#91996 = DIRECTION('',(0.,0.,1.)); +#91997 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#91998 = CYLINDRICAL_SURFACE('',#91999,0.125); +#91999 = AXIS2_PLACEMENT_3D('',#92000,#92001,#92002); +#92000 = CARTESIAN_POINT('',(-1.725,1.,0.)); +#92001 = DIRECTION('',(0.,0.,-1.)); +#92002 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92003 = ADVANCED_FACE('',(#92004),#92031,.F.); +#92004 = FACE_BOUND('',#92005,.F.); +#92005 = EDGE_LOOP('',(#92006,#92014,#92015,#92016,#92017,#92025)); +#92006 = ORIENTED_EDGE('',*,*,#92007,.F.); +#92007 = EDGE_CURVE('',#91958,#92008,#92010,.T.); +#92008 = VERTEX_POINT('',#92009); +#92009 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#92010 = LINE('',#92011,#92012); +#92011 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#92012 = VECTOR('',#92013,1.); +#92013 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92014 = ORIENTED_EDGE('',*,*,#91957,.T.); +#92015 = ORIENTED_EDGE('',*,*,#91366,.F.); +#92016 = ORIENTED_EDGE('',*,*,#91492,.F.); +#92017 = ORIENTED_EDGE('',*,*,#92018,.T.); +#92018 = EDGE_CURVE('',#91485,#92019,#92021,.T.); +#92019 = VERTEX_POINT('',#92020); +#92020 = CARTESIAN_POINT('',(-0.375,2.5,0.2)); +#92021 = LINE('',#92022,#92023); +#92022 = CARTESIAN_POINT('',(-0.375,2.225,0.2)); +#92023 = VECTOR('',#92024,1.); +#92024 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92025 = ORIENTED_EDGE('',*,*,#92026,.F.); +#92026 = EDGE_CURVE('',#92008,#92019,#92027,.T.); +#92027 = LINE('',#92028,#92029); +#92028 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#92029 = VECTOR('',#92030,1.); +#92030 = DIRECTION('',(0.,0.,1.)); +#92031 = PLANE('',#92032); +#92032 = AXIS2_PLACEMENT_3D('',#92033,#92034,#92035); +#92033 = CARTESIAN_POINT('',(-0.375,2.225,0.)); +#92034 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92035 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92036 = ADVANCED_FACE('',(#92037),#92064,.F.); +#92037 = FACE_BOUND('',#92038,.F.); +#92038 = EDGE_LOOP('',(#92039,#92047,#92055,#92061,#92062,#92063)); +#92039 = ORIENTED_EDGE('',*,*,#92040,.F.); +#92040 = EDGE_CURVE('',#92041,#91985,#92043,.T.); +#92041 = VERTEX_POINT('',#92042); +#92042 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92043 = LINE('',#92044,#92045); +#92044 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92045 = VECTOR('',#92046,1.); +#92046 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92047 = ORIENTED_EDGE('',*,*,#92048,.T.); +#92048 = EDGE_CURVE('',#92041,#92049,#92051,.T.); +#92049 = VERTEX_POINT('',#92050); +#92050 = CARTESIAN_POINT('',(-2.,0.875,0.2)); +#92051 = LINE('',#92052,#92053); +#92052 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92053 = VECTOR('',#92054,1.); +#92054 = DIRECTION('',(0.,0.,1.)); +#92055 = ORIENTED_EDGE('',*,*,#92056,.T.); +#92056 = EDGE_CURVE('',#92049,#91727,#92057,.T.); +#92057 = LINE('',#92058,#92059); +#92058 = CARTESIAN_POINT('',(-2.,0.875,0.2)); +#92059 = VECTOR('',#92060,1.); +#92060 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92061 = ORIENTED_EDGE('',*,*,#91726,.F.); +#92062 = ORIENTED_EDGE('',*,*,#90666,.F.); +#92063 = ORIENTED_EDGE('',*,*,#91984,.F.); +#92064 = PLANE('',#92065); +#92065 = AXIS2_PLACEMENT_3D('',#92066,#92067,#92068); +#92066 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#92067 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92068 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92069 = ADVANCED_FACE('',(#92070),#92104,.F.); +#92070 = FACE_BOUND('',#92071,.F.); +#92071 = EDGE_LOOP('',(#92072,#92082,#92090,#92096,#92097,#92098)); +#92072 = ORIENTED_EDGE('',*,*,#92073,.F.); +#92073 = EDGE_CURVE('',#92074,#92076,#92078,.T.); +#92074 = VERTEX_POINT('',#92075); +#92075 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92076 = VERTEX_POINT('',#92077); +#92077 = CARTESIAN_POINT('',(-0.125,2.225,0.)); +#92078 = LINE('',#92079,#92080); +#92079 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92080 = VECTOR('',#92081,1.); +#92081 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92082 = ORIENTED_EDGE('',*,*,#92083,.T.); +#92083 = EDGE_CURVE('',#92074,#92084,#92086,.T.); +#92084 = VERTEX_POINT('',#92085); +#92085 = CARTESIAN_POINT('',(-0.125,2.5,0.2)); +#92086 = LINE('',#92087,#92088); +#92087 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92088 = VECTOR('',#92089,1.); +#92089 = DIRECTION('',(0.,0.,1.)); +#92090 = ORIENTED_EDGE('',*,*,#92091,.T.); +#92091 = EDGE_CURVE('',#92084,#91500,#92092,.T.); +#92092 = LINE('',#92093,#92094); +#92093 = CARTESIAN_POINT('',(-0.125,2.5,0.2)); +#92094 = VECTOR('',#92095,1.); +#92095 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92096 = ORIENTED_EDGE('',*,*,#91499,.F.); +#92097 = ORIENTED_EDGE('',*,*,#91350,.F.); +#92098 = ORIENTED_EDGE('',*,*,#92099,.F.); +#92099 = EDGE_CURVE('',#92076,#91342,#92100,.T.); +#92100 = LINE('',#92101,#92102); +#92101 = CARTESIAN_POINT('',(-0.125,2.225,0.)); +#92102 = VECTOR('',#92103,1.); +#92103 = DIRECTION('',(0.,0.,1.)); +#92104 = PLANE('',#92105); +#92105 = AXIS2_PLACEMENT_3D('',#92106,#92107,#92108); +#92106 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#92107 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#92108 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92109 = ADVANCED_FACE('',(#92110),#92144,.F.); +#92110 = FACE_BOUND('',#92111,.F.); +#92111 = EDGE_LOOP('',(#92112,#92122,#92128,#92129,#92130,#92138)); +#92112 = ORIENTED_EDGE('',*,*,#92113,.F.); +#92113 = EDGE_CURVE('',#92114,#92116,#92118,.T.); +#92114 = VERTEX_POINT('',#92115); +#92115 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92116 = VERTEX_POINT('',#92117); +#92117 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#92118 = LINE('',#92119,#92120); +#92119 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92120 = VECTOR('',#92121,1.); +#92121 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92122 = ORIENTED_EDGE('',*,*,#92123,.T.); +#92123 = EDGE_CURVE('',#92114,#90683,#92124,.T.); +#92124 = LINE('',#92125,#92126); +#92125 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92126 = VECTOR('',#92127,1.); +#92127 = DIRECTION('',(0.,0.,1.)); +#92128 = ORIENTED_EDGE('',*,*,#90682,.F.); +#92129 = ORIENTED_EDGE('',*,*,#91719,.F.); +#92130 = ORIENTED_EDGE('',*,*,#92131,.T.); +#92131 = EDGE_CURVE('',#91712,#92132,#92134,.T.); +#92132 = VERTEX_POINT('',#92133); +#92133 = CARTESIAN_POINT('',(-2.,0.625,0.2)); +#92134 = LINE('',#92135,#92136); +#92135 = CARTESIAN_POINT('',(-1.725,0.625,0.2)); +#92136 = VECTOR('',#92137,1.); +#92137 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92138 = ORIENTED_EDGE('',*,*,#92139,.F.); +#92139 = EDGE_CURVE('',#92116,#92132,#92140,.T.); +#92140 = LINE('',#92141,#92142); +#92141 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#92142 = VECTOR('',#92143,1.); +#92143 = DIRECTION('',(0.,0.,1.)); +#92144 = PLANE('',#92145); +#92145 = AXIS2_PLACEMENT_3D('',#92146,#92147,#92148); +#92146 = CARTESIAN_POINT('',(-1.725,0.625,0.)); +#92147 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92148 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92149 = ADVANCED_FACE('',(#92150),#92169,.T.); +#92150 = FACE_BOUND('',#92151,.T.); +#92151 = EDGE_LOOP('',(#92152,#92160,#92161,#92162)); +#92152 = ORIENTED_EDGE('',*,*,#92153,.T.); +#92153 = EDGE_CURVE('',#92154,#91334,#92156,.T.); +#92154 = VERTEX_POINT('',#92155); +#92155 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92156 = LINE('',#92157,#92158); +#92157 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92158 = VECTOR('',#92159,1.); +#92159 = DIRECTION('',(0.,0.,1.)); +#92160 = ORIENTED_EDGE('',*,*,#91341,.T.); +#92161 = ORIENTED_EDGE('',*,*,#92099,.F.); +#92162 = ORIENTED_EDGE('',*,*,#92163,.T.); +#92163 = EDGE_CURVE('',#92076,#92154,#92164,.T.); +#92164 = CIRCLE('',#92165,0.125); +#92165 = AXIS2_PLACEMENT_3D('',#92166,#92167,#92168); +#92166 = CARTESIAN_POINT('',(6.661338147751E-16,2.225,0.)); +#92167 = DIRECTION('',(0.,0.,1.)); +#92168 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92169 = CYLINDRICAL_SURFACE('',#92170,0.125); +#92170 = AXIS2_PLACEMENT_3D('',#92171,#92172,#92173); +#92171 = CARTESIAN_POINT('',(6.661338147751E-16,2.225,0.)); +#92172 = DIRECTION('',(0.,0.,-1.)); +#92173 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92174 = ADVANCED_FACE('',(#92175),#92194,.T.); +#92175 = FACE_BOUND('',#92176,.T.); +#92176 = EDGE_LOOP('',(#92177,#92178,#92179,#92187)); +#92177 = ORIENTED_EDGE('',*,*,#92123,.T.); +#92178 = ORIENTED_EDGE('',*,*,#90690,.T.); +#92179 = ORIENTED_EDGE('',*,*,#92180,.F.); +#92180 = EDGE_CURVE('',#92181,#90691,#92183,.T.); +#92181 = VERTEX_POINT('',#92182); +#92182 = CARTESIAN_POINT('',(-1.725,0.375,0.)); +#92183 = LINE('',#92184,#92185); +#92184 = CARTESIAN_POINT('',(-1.725,0.375,0.)); +#92185 = VECTOR('',#92186,1.); +#92186 = DIRECTION('',(0.,0.,1.)); +#92187 = ORIENTED_EDGE('',*,*,#92188,.T.); +#92188 = EDGE_CURVE('',#92181,#92114,#92189,.T.); +#92189 = CIRCLE('',#92190,0.125); +#92190 = AXIS2_PLACEMENT_3D('',#92191,#92192,#92193); +#92191 = CARTESIAN_POINT('',(-1.725,0.5,0.)); +#92192 = DIRECTION('',(0.,0.,1.)); +#92193 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92194 = CYLINDRICAL_SURFACE('',#92195,0.125); +#92195 = AXIS2_PLACEMENT_3D('',#92196,#92197,#92198); +#92196 = CARTESIAN_POINT('',(-1.725,0.5,0.)); +#92197 = DIRECTION('',(0.,0.,-1.)); +#92198 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92199 = ADVANCED_FACE('',(#92200),#92227,.F.); +#92200 = FACE_BOUND('',#92201,.F.); +#92201 = EDGE_LOOP('',(#92202,#92210,#92211,#92212,#92213,#92221)); +#92202 = ORIENTED_EDGE('',*,*,#92203,.F.); +#92203 = EDGE_CURVE('',#92154,#92204,#92206,.T.); +#92204 = VERTEX_POINT('',#92205); +#92205 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#92206 = LINE('',#92207,#92208); +#92207 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92208 = VECTOR('',#92209,1.); +#92209 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92210 = ORIENTED_EDGE('',*,*,#92153,.T.); +#92211 = ORIENTED_EDGE('',*,*,#91333,.F.); +#92212 = ORIENTED_EDGE('',*,*,#91515,.F.); +#92213 = ORIENTED_EDGE('',*,*,#92214,.T.); +#92214 = EDGE_CURVE('',#91508,#92215,#92217,.T.); +#92215 = VERTEX_POINT('',#92216); +#92216 = CARTESIAN_POINT('',(0.125,2.5,0.2)); +#92217 = LINE('',#92218,#92219); +#92218 = CARTESIAN_POINT('',(0.125,2.225,0.2)); +#92219 = VECTOR('',#92220,1.); +#92220 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92221 = ORIENTED_EDGE('',*,*,#92222,.F.); +#92222 = EDGE_CURVE('',#92204,#92215,#92223,.T.); +#92223 = LINE('',#92224,#92225); +#92224 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#92225 = VECTOR('',#92226,1.); +#92226 = DIRECTION('',(0.,0.,1.)); +#92227 = PLANE('',#92228); +#92228 = AXIS2_PLACEMENT_3D('',#92229,#92230,#92231); +#92229 = CARTESIAN_POINT('',(0.125,2.225,0.)); +#92230 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92231 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92232 = ADVANCED_FACE('',(#92233),#92260,.F.); +#92233 = FACE_BOUND('',#92234,.F.); +#92234 = EDGE_LOOP('',(#92235,#92243,#92251,#92257,#92258,#92259)); +#92235 = ORIENTED_EDGE('',*,*,#92236,.F.); +#92236 = EDGE_CURVE('',#92237,#92181,#92239,.T.); +#92237 = VERTEX_POINT('',#92238); +#92238 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92239 = LINE('',#92240,#92241); +#92240 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92241 = VECTOR('',#92242,1.); +#92242 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92243 = ORIENTED_EDGE('',*,*,#92244,.T.); +#92244 = EDGE_CURVE('',#92237,#92245,#92247,.T.); +#92245 = VERTEX_POINT('',#92246); +#92246 = CARTESIAN_POINT('',(-2.,0.375,0.2)); +#92247 = LINE('',#92248,#92249); +#92248 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92249 = VECTOR('',#92250,1.); +#92250 = DIRECTION('',(0.,0.,1.)); +#92251 = ORIENTED_EDGE('',*,*,#92252,.T.); +#92252 = EDGE_CURVE('',#92245,#91704,#92253,.T.); +#92253 = LINE('',#92254,#92255); +#92254 = CARTESIAN_POINT('',(-2.,0.375,0.2)); +#92255 = VECTOR('',#92256,1.); +#92256 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92257 = ORIENTED_EDGE('',*,*,#91703,.F.); +#92258 = ORIENTED_EDGE('',*,*,#90699,.F.); +#92259 = ORIENTED_EDGE('',*,*,#92180,.F.); +#92260 = PLANE('',#92261); +#92261 = AXIS2_PLACEMENT_3D('',#92262,#92263,#92264); +#92262 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#92263 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92264 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92265 = ADVANCED_FACE('',(#92266),#92300,.F.); +#92266 = FACE_BOUND('',#92267,.F.); +#92267 = EDGE_LOOP('',(#92268,#92278,#92286,#92292,#92293,#92294)); +#92268 = ORIENTED_EDGE('',*,*,#92269,.F.); +#92269 = EDGE_CURVE('',#92270,#92272,#92274,.T.); +#92270 = VERTEX_POINT('',#92271); +#92271 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92272 = VERTEX_POINT('',#92273); +#92273 = CARTESIAN_POINT('',(0.375,2.225,0.)); +#92274 = LINE('',#92275,#92276); +#92275 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92276 = VECTOR('',#92277,1.); +#92277 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92278 = ORIENTED_EDGE('',*,*,#92279,.T.); +#92279 = EDGE_CURVE('',#92270,#92280,#92282,.T.); +#92280 = VERTEX_POINT('',#92281); +#92281 = CARTESIAN_POINT('',(0.375,2.5,0.2)); +#92282 = LINE('',#92283,#92284); +#92283 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92284 = VECTOR('',#92285,1.); +#92285 = DIRECTION('',(0.,0.,1.)); +#92286 = ORIENTED_EDGE('',*,*,#92287,.T.); +#92287 = EDGE_CURVE('',#92280,#91523,#92288,.T.); +#92288 = LINE('',#92289,#92290); +#92289 = CARTESIAN_POINT('',(0.375,2.5,0.2)); +#92290 = VECTOR('',#92291,1.); +#92291 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92292 = ORIENTED_EDGE('',*,*,#91522,.F.); +#92293 = ORIENTED_EDGE('',*,*,#91317,.F.); +#92294 = ORIENTED_EDGE('',*,*,#92295,.F.); +#92295 = EDGE_CURVE('',#92272,#91309,#92296,.T.); +#92296 = LINE('',#92297,#92298); +#92297 = CARTESIAN_POINT('',(0.375,2.225,0.)); +#92298 = VECTOR('',#92299,1.); +#92299 = DIRECTION('',(0.,0.,1.)); +#92300 = PLANE('',#92301); +#92301 = AXIS2_PLACEMENT_3D('',#92302,#92303,#92304); +#92302 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#92303 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#92304 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92305 = ADVANCED_FACE('',(#92306),#92340,.F.); +#92306 = FACE_BOUND('',#92307,.F.); +#92307 = EDGE_LOOP('',(#92308,#92318,#92324,#92325,#92326,#92334)); +#92308 = ORIENTED_EDGE('',*,*,#92309,.F.); +#92309 = EDGE_CURVE('',#92310,#92312,#92314,.T.); +#92310 = VERTEX_POINT('',#92311); +#92311 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92312 = VERTEX_POINT('',#92313); +#92313 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#92314 = LINE('',#92315,#92316); +#92315 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92316 = VECTOR('',#92317,1.); +#92317 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92318 = ORIENTED_EDGE('',*,*,#92319,.T.); +#92319 = EDGE_CURVE('',#92310,#90716,#92320,.T.); +#92320 = LINE('',#92321,#92322); +#92321 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92322 = VECTOR('',#92323,1.); +#92323 = DIRECTION('',(0.,0.,1.)); +#92324 = ORIENTED_EDGE('',*,*,#90715,.F.); +#92325 = ORIENTED_EDGE('',*,*,#91696,.F.); +#92326 = ORIENTED_EDGE('',*,*,#92327,.T.); +#92327 = EDGE_CURVE('',#91689,#92328,#92330,.T.); +#92328 = VERTEX_POINT('',#92329); +#92329 = CARTESIAN_POINT('',(-2.,0.125,0.2)); +#92330 = LINE('',#92331,#92332); +#92331 = CARTESIAN_POINT('',(-1.725,0.125,0.2)); +#92332 = VECTOR('',#92333,1.); +#92333 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92334 = ORIENTED_EDGE('',*,*,#92335,.F.); +#92335 = EDGE_CURVE('',#92312,#92328,#92336,.T.); +#92336 = LINE('',#92337,#92338); +#92337 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#92338 = VECTOR('',#92339,1.); +#92339 = DIRECTION('',(0.,0.,1.)); +#92340 = PLANE('',#92341); +#92341 = AXIS2_PLACEMENT_3D('',#92342,#92343,#92344); +#92342 = CARTESIAN_POINT('',(-1.725,0.125,0.)); +#92343 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92344 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92345 = ADVANCED_FACE('',(#92346),#92365,.T.); +#92346 = FACE_BOUND('',#92347,.T.); +#92347 = EDGE_LOOP('',(#92348,#92356,#92357,#92358)); +#92348 = ORIENTED_EDGE('',*,*,#92349,.T.); +#92349 = EDGE_CURVE('',#92350,#91301,#92352,.T.); +#92350 = VERTEX_POINT('',#92351); +#92351 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92352 = LINE('',#92353,#92354); +#92353 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92354 = VECTOR('',#92355,1.); +#92355 = DIRECTION('',(0.,0.,1.)); +#92356 = ORIENTED_EDGE('',*,*,#91308,.T.); +#92357 = ORIENTED_EDGE('',*,*,#92295,.F.); +#92358 = ORIENTED_EDGE('',*,*,#92359,.T.); +#92359 = EDGE_CURVE('',#92272,#92350,#92360,.T.); +#92360 = CIRCLE('',#92361,0.125); +#92361 = AXIS2_PLACEMENT_3D('',#92362,#92363,#92364); +#92362 = CARTESIAN_POINT('',(0.5,2.225,0.)); +#92363 = DIRECTION('',(0.,0.,1.)); +#92364 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92365 = CYLINDRICAL_SURFACE('',#92366,0.125); +#92366 = AXIS2_PLACEMENT_3D('',#92367,#92368,#92369); +#92367 = CARTESIAN_POINT('',(0.5,2.225,0.)); +#92368 = DIRECTION('',(0.,0.,-1.)); +#92369 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92370 = ADVANCED_FACE('',(#92371),#92390,.T.); +#92371 = FACE_BOUND('',#92372,.T.); +#92372 = EDGE_LOOP('',(#92373,#92374,#92375,#92383)); +#92373 = ORIENTED_EDGE('',*,*,#92319,.T.); +#92374 = ORIENTED_EDGE('',*,*,#90723,.T.); +#92375 = ORIENTED_EDGE('',*,*,#92376,.F.); +#92376 = EDGE_CURVE('',#92377,#90724,#92379,.T.); +#92377 = VERTEX_POINT('',#92378); +#92378 = CARTESIAN_POINT('',(-1.725,-0.125,0.)); +#92379 = LINE('',#92380,#92381); +#92380 = CARTESIAN_POINT('',(-1.725,-0.125,0.)); +#92381 = VECTOR('',#92382,1.); +#92382 = DIRECTION('',(0.,0.,1.)); +#92383 = ORIENTED_EDGE('',*,*,#92384,.T.); +#92384 = EDGE_CURVE('',#92377,#92310,#92385,.T.); +#92385 = CIRCLE('',#92386,0.125); +#92386 = AXIS2_PLACEMENT_3D('',#92387,#92388,#92389); +#92387 = CARTESIAN_POINT('',(-1.725,5.273559366969E-16,0.)); +#92388 = DIRECTION('',(0.,0.,1.)); +#92389 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92390 = CYLINDRICAL_SURFACE('',#92391,0.125); +#92391 = AXIS2_PLACEMENT_3D('',#92392,#92393,#92394); +#92392 = CARTESIAN_POINT('',(-1.725,5.273559366969E-16,0.)); +#92393 = DIRECTION('',(0.,0.,-1.)); +#92394 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92395 = ADVANCED_FACE('',(#92396),#92423,.F.); +#92396 = FACE_BOUND('',#92397,.F.); +#92397 = EDGE_LOOP('',(#92398,#92406,#92407,#92408,#92409,#92417)); +#92398 = ORIENTED_EDGE('',*,*,#92399,.F.); +#92399 = EDGE_CURVE('',#92350,#92400,#92402,.T.); +#92400 = VERTEX_POINT('',#92401); +#92401 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#92402 = LINE('',#92403,#92404); +#92403 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92404 = VECTOR('',#92405,1.); +#92405 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92406 = ORIENTED_EDGE('',*,*,#92349,.T.); +#92407 = ORIENTED_EDGE('',*,*,#91300,.F.); +#92408 = ORIENTED_EDGE('',*,*,#91538,.F.); +#92409 = ORIENTED_EDGE('',*,*,#92410,.T.); +#92410 = EDGE_CURVE('',#91531,#92411,#92413,.T.); +#92411 = VERTEX_POINT('',#92412); +#92412 = CARTESIAN_POINT('',(0.625,2.5,0.2)); +#92413 = LINE('',#92414,#92415); +#92414 = CARTESIAN_POINT('',(0.625,2.225,0.2)); +#92415 = VECTOR('',#92416,1.); +#92416 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92417 = ORIENTED_EDGE('',*,*,#92418,.F.); +#92418 = EDGE_CURVE('',#92400,#92411,#92419,.T.); +#92419 = LINE('',#92420,#92421); +#92420 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#92421 = VECTOR('',#92422,1.); +#92422 = DIRECTION('',(0.,0.,1.)); +#92423 = PLANE('',#92424); +#92424 = AXIS2_PLACEMENT_3D('',#92425,#92426,#92427); +#92425 = CARTESIAN_POINT('',(0.625,2.225,0.)); +#92426 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92427 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92428 = ADVANCED_FACE('',(#92429),#92456,.F.); +#92429 = FACE_BOUND('',#92430,.F.); +#92430 = EDGE_LOOP('',(#92431,#92439,#92447,#92453,#92454,#92455)); +#92431 = ORIENTED_EDGE('',*,*,#92432,.F.); +#92432 = EDGE_CURVE('',#92433,#92377,#92435,.T.); +#92433 = VERTEX_POINT('',#92434); +#92434 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92435 = LINE('',#92436,#92437); +#92436 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92437 = VECTOR('',#92438,1.); +#92438 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92439 = ORIENTED_EDGE('',*,*,#92440,.T.); +#92440 = EDGE_CURVE('',#92433,#92441,#92443,.T.); +#92441 = VERTEX_POINT('',#92442); +#92442 = CARTESIAN_POINT('',(-2.,-0.125,0.2)); +#92443 = LINE('',#92444,#92445); +#92444 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92445 = VECTOR('',#92446,1.); +#92446 = DIRECTION('',(0.,0.,1.)); +#92447 = ORIENTED_EDGE('',*,*,#92448,.T.); +#92448 = EDGE_CURVE('',#92441,#91681,#92449,.T.); +#92449 = LINE('',#92450,#92451); +#92450 = CARTESIAN_POINT('',(-2.,-0.125,0.2)); +#92451 = VECTOR('',#92452,1.); +#92452 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92453 = ORIENTED_EDGE('',*,*,#91680,.F.); +#92454 = ORIENTED_EDGE('',*,*,#90732,.F.); +#92455 = ORIENTED_EDGE('',*,*,#92376,.F.); +#92456 = PLANE('',#92457); +#92457 = AXIS2_PLACEMENT_3D('',#92458,#92459,#92460); +#92458 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#92459 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92460 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92461 = ADVANCED_FACE('',(#92462),#92496,.F.); +#92462 = FACE_BOUND('',#92463,.F.); +#92463 = EDGE_LOOP('',(#92464,#92474,#92482,#92488,#92489,#92490)); +#92464 = ORIENTED_EDGE('',*,*,#92465,.F.); +#92465 = EDGE_CURVE('',#92466,#92468,#92470,.T.); +#92466 = VERTEX_POINT('',#92467); +#92467 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92468 = VERTEX_POINT('',#92469); +#92469 = CARTESIAN_POINT('',(0.875,2.225,0.)); +#92470 = LINE('',#92471,#92472); +#92471 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92472 = VECTOR('',#92473,1.); +#92473 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92474 = ORIENTED_EDGE('',*,*,#92475,.T.); +#92475 = EDGE_CURVE('',#92466,#92476,#92478,.T.); +#92476 = VERTEX_POINT('',#92477); +#92477 = CARTESIAN_POINT('',(0.875,2.5,0.2)); +#92478 = LINE('',#92479,#92480); +#92479 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92480 = VECTOR('',#92481,1.); +#92481 = DIRECTION('',(0.,0.,1.)); +#92482 = ORIENTED_EDGE('',*,*,#92483,.T.); +#92483 = EDGE_CURVE('',#92476,#91546,#92484,.T.); +#92484 = LINE('',#92485,#92486); +#92485 = CARTESIAN_POINT('',(0.875,2.5,0.2)); +#92486 = VECTOR('',#92487,1.); +#92487 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92488 = ORIENTED_EDGE('',*,*,#91545,.F.); +#92489 = ORIENTED_EDGE('',*,*,#91284,.F.); +#92490 = ORIENTED_EDGE('',*,*,#92491,.F.); +#92491 = EDGE_CURVE('',#92468,#91276,#92492,.T.); +#92492 = LINE('',#92493,#92494); +#92493 = CARTESIAN_POINT('',(0.875,2.225,0.)); +#92494 = VECTOR('',#92495,1.); +#92495 = DIRECTION('',(0.,0.,1.)); +#92496 = PLANE('',#92497); +#92497 = AXIS2_PLACEMENT_3D('',#92498,#92499,#92500); +#92498 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#92499 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#92500 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#92501 = ADVANCED_FACE('',(#92502),#92536,.F.); +#92502 = FACE_BOUND('',#92503,.F.); +#92503 = EDGE_LOOP('',(#92504,#92514,#92520,#92521,#92522,#92530)); +#92504 = ORIENTED_EDGE('',*,*,#92505,.F.); +#92505 = EDGE_CURVE('',#92506,#92508,#92510,.T.); +#92506 = VERTEX_POINT('',#92507); +#92507 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92508 = VERTEX_POINT('',#92509); +#92509 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#92510 = LINE('',#92511,#92512); +#92511 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92512 = VECTOR('',#92513,1.); +#92513 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92514 = ORIENTED_EDGE('',*,*,#92515,.T.); +#92515 = EDGE_CURVE('',#92506,#90749,#92516,.T.); +#92516 = LINE('',#92517,#92518); +#92517 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92518 = VECTOR('',#92519,1.); +#92519 = DIRECTION('',(0.,0.,1.)); +#92520 = ORIENTED_EDGE('',*,*,#90748,.F.); +#92521 = ORIENTED_EDGE('',*,*,#91673,.F.); +#92522 = ORIENTED_EDGE('',*,*,#92523,.T.); +#92523 = EDGE_CURVE('',#91666,#92524,#92526,.T.); +#92524 = VERTEX_POINT('',#92525); +#92525 = CARTESIAN_POINT('',(-2.,-0.375,0.2)); +#92526 = LINE('',#92527,#92528); +#92527 = CARTESIAN_POINT('',(-1.725,-0.375,0.2)); +#92528 = VECTOR('',#92529,1.); +#92529 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92530 = ORIENTED_EDGE('',*,*,#92531,.F.); +#92531 = EDGE_CURVE('',#92508,#92524,#92532,.T.); +#92532 = LINE('',#92533,#92534); +#92533 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#92534 = VECTOR('',#92535,1.); +#92535 = DIRECTION('',(0.,0.,1.)); +#92536 = PLANE('',#92537); +#92537 = AXIS2_PLACEMENT_3D('',#92538,#92539,#92540); +#92538 = CARTESIAN_POINT('',(-1.725,-0.375,0.)); +#92539 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92540 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92541 = ADVANCED_FACE('',(#92542),#92561,.T.); +#92542 = FACE_BOUND('',#92543,.T.); +#92543 = EDGE_LOOP('',(#92544,#92552,#92553,#92554)); +#92544 = ORIENTED_EDGE('',*,*,#92545,.T.); +#92545 = EDGE_CURVE('',#92546,#91268,#92548,.T.); +#92546 = VERTEX_POINT('',#92547); +#92547 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92548 = LINE('',#92549,#92550); +#92549 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92550 = VECTOR('',#92551,1.); +#92551 = DIRECTION('',(0.,0.,1.)); +#92552 = ORIENTED_EDGE('',*,*,#91275,.T.); +#92553 = ORIENTED_EDGE('',*,*,#92491,.F.); +#92554 = ORIENTED_EDGE('',*,*,#92555,.T.); +#92555 = EDGE_CURVE('',#92468,#92546,#92556,.T.); +#92556 = CIRCLE('',#92557,0.125); +#92557 = AXIS2_PLACEMENT_3D('',#92558,#92559,#92560); +#92558 = CARTESIAN_POINT('',(1.,2.225,0.)); +#92559 = DIRECTION('',(0.,0.,1.)); +#92560 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92561 = CYLINDRICAL_SURFACE('',#92562,0.125); +#92562 = AXIS2_PLACEMENT_3D('',#92563,#92564,#92565); +#92563 = CARTESIAN_POINT('',(1.,2.225,0.)); +#92564 = DIRECTION('',(0.,0.,-1.)); +#92565 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92566 = ADVANCED_FACE('',(#92567),#92586,.T.); +#92567 = FACE_BOUND('',#92568,.T.); +#92568 = EDGE_LOOP('',(#92569,#92570,#92571,#92579)); +#92569 = ORIENTED_EDGE('',*,*,#92515,.T.); +#92570 = ORIENTED_EDGE('',*,*,#90756,.T.); +#92571 = ORIENTED_EDGE('',*,*,#92572,.F.); +#92572 = EDGE_CURVE('',#92573,#90757,#92575,.T.); +#92573 = VERTEX_POINT('',#92574); +#92574 = CARTESIAN_POINT('',(-1.725,-0.625,0.)); +#92575 = LINE('',#92576,#92577); +#92576 = CARTESIAN_POINT('',(-1.725,-0.625,0.)); +#92577 = VECTOR('',#92578,1.); +#92578 = DIRECTION('',(0.,0.,1.)); +#92579 = ORIENTED_EDGE('',*,*,#92580,.T.); +#92580 = EDGE_CURVE('',#92573,#92506,#92581,.T.); +#92581 = CIRCLE('',#92582,0.125); +#92582 = AXIS2_PLACEMENT_3D('',#92583,#92584,#92585); +#92583 = CARTESIAN_POINT('',(-1.725,-0.5,0.)); +#92584 = DIRECTION('',(0.,0.,1.)); +#92585 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92586 = CYLINDRICAL_SURFACE('',#92587,0.125); +#92587 = AXIS2_PLACEMENT_3D('',#92588,#92589,#92590); +#92588 = CARTESIAN_POINT('',(-1.725,-0.5,0.)); +#92589 = DIRECTION('',(0.,0.,-1.)); +#92590 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92591 = ADVANCED_FACE('',(#92592),#92619,.F.); +#92592 = FACE_BOUND('',#92593,.F.); +#92593 = EDGE_LOOP('',(#92594,#92602,#92603,#92604,#92605,#92613)); +#92594 = ORIENTED_EDGE('',*,*,#92595,.F.); +#92595 = EDGE_CURVE('',#92546,#92596,#92598,.T.); +#92596 = VERTEX_POINT('',#92597); +#92597 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#92598 = LINE('',#92599,#92600); +#92599 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92600 = VECTOR('',#92601,1.); +#92601 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92602 = ORIENTED_EDGE('',*,*,#92545,.T.); +#92603 = ORIENTED_EDGE('',*,*,#91267,.F.); +#92604 = ORIENTED_EDGE('',*,*,#91561,.F.); +#92605 = ORIENTED_EDGE('',*,*,#92606,.T.); +#92606 = EDGE_CURVE('',#91554,#92607,#92609,.T.); +#92607 = VERTEX_POINT('',#92608); +#92608 = CARTESIAN_POINT('',(1.125,2.5,0.2)); +#92609 = LINE('',#92610,#92611); +#92610 = CARTESIAN_POINT('',(1.125,2.225,0.2)); +#92611 = VECTOR('',#92612,1.); +#92612 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92613 = ORIENTED_EDGE('',*,*,#92614,.F.); +#92614 = EDGE_CURVE('',#92596,#92607,#92615,.T.); +#92615 = LINE('',#92616,#92617); +#92616 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#92617 = VECTOR('',#92618,1.); +#92618 = DIRECTION('',(0.,0.,1.)); +#92619 = PLANE('',#92620); +#92620 = AXIS2_PLACEMENT_3D('',#92621,#92622,#92623); +#92621 = CARTESIAN_POINT('',(1.125,2.225,0.)); +#92622 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#92623 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#92624 = ADVANCED_FACE('',(#92625),#92652,.F.); +#92625 = FACE_BOUND('',#92626,.F.); +#92626 = EDGE_LOOP('',(#92627,#92635,#92643,#92649,#92650,#92651)); +#92627 = ORIENTED_EDGE('',*,*,#92628,.F.); +#92628 = EDGE_CURVE('',#92629,#92573,#92631,.T.); +#92629 = VERTEX_POINT('',#92630); +#92630 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92631 = LINE('',#92632,#92633); +#92632 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92633 = VECTOR('',#92634,1.); +#92634 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92635 = ORIENTED_EDGE('',*,*,#92636,.T.); +#92636 = EDGE_CURVE('',#92629,#92637,#92639,.T.); +#92637 = VERTEX_POINT('',#92638); +#92638 = CARTESIAN_POINT('',(-2.,-0.625,0.2)); +#92639 = LINE('',#92640,#92641); +#92640 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92641 = VECTOR('',#92642,1.); +#92642 = DIRECTION('',(0.,0.,1.)); +#92643 = ORIENTED_EDGE('',*,*,#92644,.T.); +#92644 = EDGE_CURVE('',#92637,#91658,#92645,.T.); +#92645 = LINE('',#92646,#92647); +#92646 = CARTESIAN_POINT('',(-2.,-0.625,0.2)); +#92647 = VECTOR('',#92648,1.); +#92648 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92649 = ORIENTED_EDGE('',*,*,#91657,.F.); +#92650 = ORIENTED_EDGE('',*,*,#90765,.F.); +#92651 = ORIENTED_EDGE('',*,*,#92572,.F.); +#92652 = PLANE('',#92653); +#92653 = AXIS2_PLACEMENT_3D('',#92654,#92655,#92656); +#92654 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#92655 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#92656 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92657 = ADVANCED_FACE('',(#92658),#92837,.T.); +#92658 = FACE_BOUND('',#92659,.T.); +#92659 = EDGE_LOOP('',(#92660,#92661,#92662,#92670,#92676,#92677,#92685, + #92693,#92699,#92700,#92708,#92716,#92722,#92723,#92731,#92739, + #92745,#92746,#92754,#92762,#92768,#92769,#92777,#92785,#92791, + #92792,#92800,#92808,#92814,#92815,#92823,#92831)); +#92660 = ORIENTED_EDGE('',*,*,#91251,.F.); +#92661 = ORIENTED_EDGE('',*,*,#91568,.T.); +#92662 = ORIENTED_EDGE('',*,*,#92663,.T.); +#92663 = EDGE_CURVE('',#91453,#92664,#92666,.T.); +#92664 = VERTEX_POINT('',#92665); +#92665 = CARTESIAN_POINT('',(1.99,-2.49,0.77)); +#92666 = LINE('',#92667,#92668); +#92667 = CARTESIAN_POINT('',(1.99,2.49,0.77)); +#92668 = VECTOR('',#92669,1.); +#92669 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#92670 = ORIENTED_EDGE('',*,*,#92671,.F.); +#92671 = EDGE_CURVE('',#91013,#92664,#92672,.T.); +#92672 = LINE('',#92673,#92674); +#92673 = CARTESIAN_POINT('',(1.99,-2.49,2.E-02)); +#92674 = VECTOR('',#92675,1.); +#92675 = DIRECTION('',(0.,0.,1.)); +#92676 = ORIENTED_EDGE('',*,*,#91020,.F.); +#92677 = ORIENTED_EDGE('',*,*,#92678,.T.); +#92678 = EDGE_CURVE('',#91021,#92679,#92681,.T.); +#92679 = VERTEX_POINT('',#92680); +#92680 = CARTESIAN_POINT('',(1.99,-1.625,0.2)); +#92681 = LINE('',#92682,#92683); +#92682 = CARTESIAN_POINT('',(1.99,-1.625,1.E-02)); +#92683 = VECTOR('',#92684,1.); +#92684 = DIRECTION('',(0.,0.,1.)); +#92685 = ORIENTED_EDGE('',*,*,#92686,.T.); +#92686 = EDGE_CURVE('',#92679,#92687,#92689,.T.); +#92687 = VERTEX_POINT('',#92688); +#92688 = CARTESIAN_POINT('',(1.99,-1.375,0.2)); +#92689 = LINE('',#92690,#92691); +#92690 = CARTESIAN_POINT('',(1.99,0.5575,0.2)); +#92691 = VECTOR('',#92692,1.); +#92692 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92693 = ORIENTED_EDGE('',*,*,#92694,.T.); +#92694 = EDGE_CURVE('',#92687,#91046,#92695,.T.); +#92695 = LINE('',#92696,#92697); +#92696 = CARTESIAN_POINT('',(1.99,-1.375,1.E-02)); +#92697 = VECTOR('',#92698,1.); +#92698 = DIRECTION('',(0.,-0.,-1.)); +#92699 = ORIENTED_EDGE('',*,*,#91053,.F.); +#92700 = ORIENTED_EDGE('',*,*,#92701,.T.); +#92701 = EDGE_CURVE('',#91054,#92702,#92704,.T.); +#92702 = VERTEX_POINT('',#92703); +#92703 = CARTESIAN_POINT('',(1.99,-1.125,0.2)); +#92704 = LINE('',#92705,#92706); +#92705 = CARTESIAN_POINT('',(1.99,-1.125,1.E-02)); +#92706 = VECTOR('',#92707,1.); +#92707 = DIRECTION('',(0.,0.,1.)); +#92708 = ORIENTED_EDGE('',*,*,#92709,.T.); +#92709 = EDGE_CURVE('',#92702,#92710,#92712,.T.); +#92710 = VERTEX_POINT('',#92711); +#92711 = CARTESIAN_POINT('',(1.99,-0.875,0.2)); +#92712 = LINE('',#92713,#92714); +#92713 = CARTESIAN_POINT('',(1.99,0.8075,0.2)); +#92714 = VECTOR('',#92715,1.); +#92715 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92716 = ORIENTED_EDGE('',*,*,#92717,.T.); +#92717 = EDGE_CURVE('',#92710,#91079,#92718,.T.); +#92718 = LINE('',#92719,#92720); +#92719 = CARTESIAN_POINT('',(1.99,-0.875,1.E-02)); +#92720 = VECTOR('',#92721,1.); +#92721 = DIRECTION('',(0.,-0.,-1.)); +#92722 = ORIENTED_EDGE('',*,*,#91086,.F.); +#92723 = ORIENTED_EDGE('',*,*,#92724,.T.); +#92724 = EDGE_CURVE('',#91087,#92725,#92727,.T.); +#92725 = VERTEX_POINT('',#92726); +#92726 = CARTESIAN_POINT('',(1.99,-0.625,0.2)); +#92727 = LINE('',#92728,#92729); +#92728 = CARTESIAN_POINT('',(1.99,-0.625,1.E-02)); +#92729 = VECTOR('',#92730,1.); +#92730 = DIRECTION('',(0.,0.,1.)); +#92731 = ORIENTED_EDGE('',*,*,#92732,.T.); +#92732 = EDGE_CURVE('',#92725,#92733,#92735,.T.); +#92733 = VERTEX_POINT('',#92734); +#92734 = CARTESIAN_POINT('',(1.99,-0.375,0.2)); +#92735 = LINE('',#92736,#92737); +#92736 = CARTESIAN_POINT('',(1.99,1.0575,0.2)); +#92737 = VECTOR('',#92738,1.); +#92738 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92739 = ORIENTED_EDGE('',*,*,#92740,.T.); +#92740 = EDGE_CURVE('',#92733,#91112,#92741,.T.); +#92741 = LINE('',#92742,#92743); +#92742 = CARTESIAN_POINT('',(1.99,-0.375,1.E-02)); +#92743 = VECTOR('',#92744,1.); +#92744 = DIRECTION('',(0.,-0.,-1.)); +#92745 = ORIENTED_EDGE('',*,*,#91119,.F.); +#92746 = ORIENTED_EDGE('',*,*,#92747,.T.); +#92747 = EDGE_CURVE('',#91120,#92748,#92750,.T.); +#92748 = VERTEX_POINT('',#92749); +#92749 = CARTESIAN_POINT('',(1.99,-0.125,0.2)); +#92750 = LINE('',#92751,#92752); +#92751 = CARTESIAN_POINT('',(1.99,-0.125,1.E-02)); +#92752 = VECTOR('',#92753,1.); +#92753 = DIRECTION('',(0.,0.,1.)); +#92754 = ORIENTED_EDGE('',*,*,#92755,.T.); +#92755 = EDGE_CURVE('',#92748,#92756,#92758,.T.); +#92756 = VERTEX_POINT('',#92757); +#92757 = CARTESIAN_POINT('',(1.99,0.125,0.2)); +#92758 = LINE('',#92759,#92760); +#92759 = CARTESIAN_POINT('',(1.99,1.3075,0.2)); +#92760 = VECTOR('',#92761,1.); +#92761 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92762 = ORIENTED_EDGE('',*,*,#92763,.T.); +#92763 = EDGE_CURVE('',#92756,#91145,#92764,.T.); +#92764 = LINE('',#92765,#92766); +#92765 = CARTESIAN_POINT('',(1.99,0.125,1.E-02)); +#92766 = VECTOR('',#92767,1.); +#92767 = DIRECTION('',(0.,-0.,-1.)); +#92768 = ORIENTED_EDGE('',*,*,#91152,.F.); +#92769 = ORIENTED_EDGE('',*,*,#92770,.T.); +#92770 = EDGE_CURVE('',#91153,#92771,#92773,.T.); +#92771 = VERTEX_POINT('',#92772); +#92772 = CARTESIAN_POINT('',(1.99,0.375,0.2)); +#92773 = LINE('',#92774,#92775); +#92774 = CARTESIAN_POINT('',(1.99,0.375,1.E-02)); +#92775 = VECTOR('',#92776,1.); +#92776 = DIRECTION('',(0.,0.,1.)); +#92777 = ORIENTED_EDGE('',*,*,#92778,.T.); +#92778 = EDGE_CURVE('',#92771,#92779,#92781,.T.); +#92779 = VERTEX_POINT('',#92780); +#92780 = CARTESIAN_POINT('',(1.99,0.625,0.2)); +#92781 = LINE('',#92782,#92783); +#92782 = CARTESIAN_POINT('',(1.99,1.5575,0.2)); +#92783 = VECTOR('',#92784,1.); +#92784 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92785 = ORIENTED_EDGE('',*,*,#92786,.T.); +#92786 = EDGE_CURVE('',#92779,#91178,#92787,.T.); +#92787 = LINE('',#92788,#92789); +#92788 = CARTESIAN_POINT('',(1.99,0.625,1.E-02)); +#92789 = VECTOR('',#92790,1.); +#92790 = DIRECTION('',(0.,-0.,-1.)); +#92791 = ORIENTED_EDGE('',*,*,#91185,.F.); +#92792 = ORIENTED_EDGE('',*,*,#92793,.T.); +#92793 = EDGE_CURVE('',#91186,#92794,#92796,.T.); +#92794 = VERTEX_POINT('',#92795); +#92795 = CARTESIAN_POINT('',(1.99,0.875,0.2)); +#92796 = LINE('',#92797,#92798); +#92797 = CARTESIAN_POINT('',(1.99,0.875,1.E-02)); +#92798 = VECTOR('',#92799,1.); +#92799 = DIRECTION('',(0.,0.,1.)); +#92800 = ORIENTED_EDGE('',*,*,#92801,.T.); +#92801 = EDGE_CURVE('',#92794,#92802,#92804,.T.); +#92802 = VERTEX_POINT('',#92803); +#92803 = CARTESIAN_POINT('',(1.99,1.125,0.2)); +#92804 = LINE('',#92805,#92806); +#92805 = CARTESIAN_POINT('',(1.99,1.8075,0.2)); +#92806 = VECTOR('',#92807,1.); +#92807 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92808 = ORIENTED_EDGE('',*,*,#92809,.T.); +#92809 = EDGE_CURVE('',#92802,#91211,#92810,.T.); +#92810 = LINE('',#92811,#92812); +#92811 = CARTESIAN_POINT('',(1.99,1.125,1.E-02)); +#92812 = VECTOR('',#92813,1.); +#92813 = DIRECTION('',(0.,-0.,-1.)); +#92814 = ORIENTED_EDGE('',*,*,#91218,.F.); +#92815 = ORIENTED_EDGE('',*,*,#92816,.T.); +#92816 = EDGE_CURVE('',#91219,#92817,#92819,.T.); +#92817 = VERTEX_POINT('',#92818); +#92818 = CARTESIAN_POINT('',(1.99,1.375,0.2)); +#92819 = LINE('',#92820,#92821); +#92820 = CARTESIAN_POINT('',(1.99,1.375,1.E-02)); +#92821 = VECTOR('',#92822,1.); +#92822 = DIRECTION('',(0.,0.,1.)); +#92823 = ORIENTED_EDGE('',*,*,#92824,.T.); +#92824 = EDGE_CURVE('',#92817,#92825,#92827,.T.); +#92825 = VERTEX_POINT('',#92826); +#92826 = CARTESIAN_POINT('',(1.99,1.625,0.2)); +#92827 = LINE('',#92828,#92829); +#92828 = CARTESIAN_POINT('',(1.99,2.0575,0.2)); +#92829 = VECTOR('',#92830,1.); +#92830 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#92831 = ORIENTED_EDGE('',*,*,#92832,.T.); +#92832 = EDGE_CURVE('',#92825,#91244,#92833,.T.); +#92833 = LINE('',#92834,#92835); +#92834 = CARTESIAN_POINT('',(1.99,1.625,1.E-02)); +#92835 = VECTOR('',#92836,1.); +#92836 = DIRECTION('',(0.,-0.,-1.)); +#92837 = PLANE('',#92838); +#92838 = AXIS2_PLACEMENT_3D('',#92839,#92840,#92841); +#92839 = CARTESIAN_POINT('',(1.99,2.49,2.E-02)); +#92840 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#92841 = DIRECTION('',(0.,0.,1.)); +#92842 = ADVANCED_FACE('',(#92843),#92877,.F.); +#92843 = FACE_BOUND('',#92844,.F.); +#92844 = EDGE_LOOP('',(#92845,#92855,#92861,#92862,#92863,#92871)); +#92845 = ORIENTED_EDGE('',*,*,#92846,.F.); +#92846 = EDGE_CURVE('',#92847,#92849,#92851,.T.); +#92847 = VERTEX_POINT('',#92848); +#92848 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92849 = VERTEX_POINT('',#92850); +#92850 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#92851 = LINE('',#92852,#92853); +#92852 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92853 = VECTOR('',#92854,1.); +#92854 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92855 = ORIENTED_EDGE('',*,*,#92856,.T.); +#92856 = EDGE_CURVE('',#92847,#90782,#92857,.T.); +#92857 = LINE('',#92858,#92859); +#92858 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92859 = VECTOR('',#92860,1.); +#92860 = DIRECTION('',(0.,0.,1.)); +#92861 = ORIENTED_EDGE('',*,*,#90781,.F.); +#92862 = ORIENTED_EDGE('',*,*,#91650,.F.); +#92863 = ORIENTED_EDGE('',*,*,#92864,.T.); +#92864 = EDGE_CURVE('',#91643,#92865,#92867,.T.); +#92865 = VERTEX_POINT('',#92866); +#92866 = CARTESIAN_POINT('',(-2.,-0.875,0.2)); +#92867 = LINE('',#92868,#92869); +#92868 = CARTESIAN_POINT('',(-1.725,-0.875,0.2)); +#92869 = VECTOR('',#92870,1.); +#92870 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92871 = ORIENTED_EDGE('',*,*,#92872,.F.); +#92872 = EDGE_CURVE('',#92849,#92865,#92873,.T.); +#92873 = LINE('',#92874,#92875); +#92874 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#92875 = VECTOR('',#92876,1.); +#92876 = DIRECTION('',(0.,0.,1.)); +#92877 = PLANE('',#92878); +#92878 = AXIS2_PLACEMENT_3D('',#92879,#92880,#92881); +#92879 = CARTESIAN_POINT('',(-1.725,-0.875,0.)); +#92880 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92881 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#92882 = ADVANCED_FACE('',(#92883),#92917,.F.); +#92883 = FACE_BOUND('',#92884,.F.); +#92884 = EDGE_LOOP('',(#92885,#92895,#92903,#92909,#92910,#92911)); +#92885 = ORIENTED_EDGE('',*,*,#92886,.F.); +#92886 = EDGE_CURVE('',#92887,#92889,#92891,.T.); +#92887 = VERTEX_POINT('',#92888); +#92888 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92889 = VERTEX_POINT('',#92890); +#92890 = CARTESIAN_POINT('',(1.725,1.625,0.)); +#92891 = LINE('',#92892,#92893); +#92892 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92893 = VECTOR('',#92894,1.); +#92894 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#92895 = ORIENTED_EDGE('',*,*,#92896,.T.); +#92896 = EDGE_CURVE('',#92887,#92897,#92899,.T.); +#92897 = VERTEX_POINT('',#92898); +#92898 = CARTESIAN_POINT('',(2.,1.625,0.2)); +#92899 = LINE('',#92900,#92901); +#92900 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92901 = VECTOR('',#92902,1.); +#92902 = DIRECTION('',(0.,0.,1.)); +#92903 = ORIENTED_EDGE('',*,*,#92904,.T.); +#92904 = EDGE_CURVE('',#92897,#92825,#92905,.T.); +#92905 = LINE('',#92906,#92907); +#92906 = CARTESIAN_POINT('',(2.,1.625,0.2)); +#92907 = VECTOR('',#92908,1.); +#92908 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#92909 = ORIENTED_EDGE('',*,*,#92832,.T.); +#92910 = ORIENTED_EDGE('',*,*,#91243,.F.); +#92911 = ORIENTED_EDGE('',*,*,#92912,.F.); +#92912 = EDGE_CURVE('',#92889,#91235,#92913,.T.); +#92913 = LINE('',#92914,#92915); +#92914 = CARTESIAN_POINT('',(1.725,1.625,0.)); +#92915 = VECTOR('',#92916,1.); +#92916 = DIRECTION('',(0.,0.,1.)); +#92917 = PLANE('',#92918); +#92918 = AXIS2_PLACEMENT_3D('',#92919,#92920,#92921); +#92919 = CARTESIAN_POINT('',(2.,1.625,0.)); +#92920 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#92921 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#92922 = ADVANCED_FACE('',(#92923),#92942,.T.); +#92923 = FACE_BOUND('',#92924,.T.); +#92924 = EDGE_LOOP('',(#92925,#92926,#92927,#92935)); +#92925 = ORIENTED_EDGE('',*,*,#92856,.T.); +#92926 = ORIENTED_EDGE('',*,*,#90789,.T.); +#92927 = ORIENTED_EDGE('',*,*,#92928,.F.); +#92928 = EDGE_CURVE('',#92929,#90790,#92931,.T.); +#92929 = VERTEX_POINT('',#92930); +#92930 = CARTESIAN_POINT('',(-1.725,-1.125,0.)); +#92931 = LINE('',#92932,#92933); +#92932 = CARTESIAN_POINT('',(-1.725,-1.125,0.)); +#92933 = VECTOR('',#92934,1.); +#92934 = DIRECTION('',(0.,0.,1.)); +#92935 = ORIENTED_EDGE('',*,*,#92936,.T.); +#92936 = EDGE_CURVE('',#92929,#92847,#92937,.T.); +#92937 = CIRCLE('',#92938,0.125); +#92938 = AXIS2_PLACEMENT_3D('',#92939,#92940,#92941); +#92939 = CARTESIAN_POINT('',(-1.725,-1.,0.)); +#92940 = DIRECTION('',(0.,0.,1.)); +#92941 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#92942 = CYLINDRICAL_SURFACE('',#92943,0.125); +#92943 = AXIS2_PLACEMENT_3D('',#92944,#92945,#92946); +#92944 = CARTESIAN_POINT('',(-1.725,-1.,0.)); +#92945 = DIRECTION('',(0.,0.,-1.)); +#92946 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#92947 = ADVANCED_FACE('',(#92948),#92967,.T.); +#92948 = FACE_BOUND('',#92949,.T.); +#92949 = EDGE_LOOP('',(#92950,#92958,#92959,#92960)); +#92950 = ORIENTED_EDGE('',*,*,#92951,.T.); +#92951 = EDGE_CURVE('',#92952,#91227,#92954,.T.); +#92952 = VERTEX_POINT('',#92953); +#92953 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#92954 = LINE('',#92955,#92956); +#92955 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#92956 = VECTOR('',#92957,1.); +#92957 = DIRECTION('',(0.,0.,1.)); +#92958 = ORIENTED_EDGE('',*,*,#91234,.T.); +#92959 = ORIENTED_EDGE('',*,*,#92912,.F.); +#92960 = ORIENTED_EDGE('',*,*,#92961,.T.); +#92961 = EDGE_CURVE('',#92889,#92952,#92962,.T.); +#92962 = CIRCLE('',#92963,0.125); +#92963 = AXIS2_PLACEMENT_3D('',#92964,#92965,#92966); +#92964 = CARTESIAN_POINT('',(1.725,1.5,0.)); +#92965 = DIRECTION('',(0.,-0.,1.)); +#92966 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#92967 = CYLINDRICAL_SURFACE('',#92968,0.125); +#92968 = AXIS2_PLACEMENT_3D('',#92969,#92970,#92971); +#92969 = CARTESIAN_POINT('',(1.725,1.5,0.)); +#92970 = DIRECTION('',(0.,-0.,-1.)); +#92971 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#92972 = ADVANCED_FACE('',(#92973),#93000,.F.); +#92973 = FACE_BOUND('',#92974,.F.); +#92974 = EDGE_LOOP('',(#92975,#92983,#92991,#92997,#92998,#92999)); +#92975 = ORIENTED_EDGE('',*,*,#92976,.F.); +#92976 = EDGE_CURVE('',#92977,#92929,#92979,.T.); +#92977 = VERTEX_POINT('',#92978); +#92978 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#92979 = LINE('',#92980,#92981); +#92980 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#92981 = VECTOR('',#92982,1.); +#92982 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92983 = ORIENTED_EDGE('',*,*,#92984,.T.); +#92984 = EDGE_CURVE('',#92977,#92985,#92987,.T.); +#92985 = VERTEX_POINT('',#92986); +#92986 = CARTESIAN_POINT('',(-2.,-1.125,0.2)); +#92987 = LINE('',#92988,#92989); +#92988 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#92989 = VECTOR('',#92990,1.); +#92990 = DIRECTION('',(0.,0.,1.)); +#92991 = ORIENTED_EDGE('',*,*,#92992,.T.); +#92992 = EDGE_CURVE('',#92985,#91635,#92993,.T.); +#92993 = LINE('',#92994,#92995); +#92994 = CARTESIAN_POINT('',(-2.,-1.125,0.2)); +#92995 = VECTOR('',#92996,1.); +#92996 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#92997 = ORIENTED_EDGE('',*,*,#91634,.F.); +#92998 = ORIENTED_EDGE('',*,*,#90798,.F.); +#92999 = ORIENTED_EDGE('',*,*,#92928,.F.); +#93000 = PLANE('',#93001); +#93001 = AXIS2_PLACEMENT_3D('',#93002,#93003,#93004); +#93002 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#93003 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#93004 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93005 = ADVANCED_FACE('',(#93006),#93033,.F.); +#93006 = FACE_BOUND('',#93007,.F.); +#93007 = EDGE_LOOP('',(#93008,#93016,#93017,#93018,#93019,#93027)); +#93008 = ORIENTED_EDGE('',*,*,#93009,.F.); +#93009 = EDGE_CURVE('',#92952,#93010,#93012,.T.); +#93010 = VERTEX_POINT('',#93011); +#93011 = CARTESIAN_POINT('',(2.,1.375,0.)); +#93012 = LINE('',#93013,#93014); +#93013 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#93014 = VECTOR('',#93015,1.); +#93015 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93016 = ORIENTED_EDGE('',*,*,#92951,.T.); +#93017 = ORIENTED_EDGE('',*,*,#91226,.F.); +#93018 = ORIENTED_EDGE('',*,*,#92816,.T.); +#93019 = ORIENTED_EDGE('',*,*,#93020,.T.); +#93020 = EDGE_CURVE('',#92817,#93021,#93023,.T.); +#93021 = VERTEX_POINT('',#93022); +#93022 = CARTESIAN_POINT('',(2.,1.375,0.2)); +#93023 = LINE('',#93024,#93025); +#93024 = CARTESIAN_POINT('',(1.725,1.375,0.2)); +#93025 = VECTOR('',#93026,1.); +#93026 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93027 = ORIENTED_EDGE('',*,*,#93028,.F.); +#93028 = EDGE_CURVE('',#93010,#93021,#93029,.T.); +#93029 = LINE('',#93030,#93031); +#93030 = CARTESIAN_POINT('',(2.,1.375,0.)); +#93031 = VECTOR('',#93032,1.); +#93032 = DIRECTION('',(0.,0.,1.)); +#93033 = PLANE('',#93034); +#93034 = AXIS2_PLACEMENT_3D('',#93035,#93036,#93037); +#93035 = CARTESIAN_POINT('',(1.725,1.375,0.)); +#93036 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93037 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93038 = ADVANCED_FACE('',(#93039),#93073,.F.); +#93039 = FACE_BOUND('',#93040,.F.); +#93040 = EDGE_LOOP('',(#93041,#93051,#93057,#93058,#93059,#93067)); +#93041 = ORIENTED_EDGE('',*,*,#93042,.F.); +#93042 = EDGE_CURVE('',#93043,#93045,#93047,.T.); +#93043 = VERTEX_POINT('',#93044); +#93044 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93045 = VERTEX_POINT('',#93046); +#93046 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#93047 = LINE('',#93048,#93049); +#93048 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93049 = VECTOR('',#93050,1.); +#93050 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#93051 = ORIENTED_EDGE('',*,*,#93052,.T.); +#93052 = EDGE_CURVE('',#93043,#90815,#93053,.T.); +#93053 = LINE('',#93054,#93055); +#93054 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93055 = VECTOR('',#93056,1.); +#93056 = DIRECTION('',(0.,0.,1.)); +#93057 = ORIENTED_EDGE('',*,*,#90814,.F.); +#93058 = ORIENTED_EDGE('',*,*,#91627,.F.); +#93059 = ORIENTED_EDGE('',*,*,#93060,.T.); +#93060 = EDGE_CURVE('',#91620,#93061,#93063,.T.); +#93061 = VERTEX_POINT('',#93062); +#93062 = CARTESIAN_POINT('',(-2.,-1.375,0.2)); +#93063 = LINE('',#93064,#93065); +#93064 = CARTESIAN_POINT('',(-1.725,-1.375,0.2)); +#93065 = VECTOR('',#93066,1.); +#93066 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#93067 = ORIENTED_EDGE('',*,*,#93068,.F.); +#93068 = EDGE_CURVE('',#93045,#93061,#93069,.T.); +#93069 = LINE('',#93070,#93071); +#93070 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#93071 = VECTOR('',#93072,1.); +#93072 = DIRECTION('',(0.,0.,1.)); +#93073 = PLANE('',#93074); +#93074 = AXIS2_PLACEMENT_3D('',#93075,#93076,#93077); +#93075 = CARTESIAN_POINT('',(-1.725,-1.375,0.)); +#93076 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#93077 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#93078 = ADVANCED_FACE('',(#93079),#93113,.F.); +#93079 = FACE_BOUND('',#93080,.F.); +#93080 = EDGE_LOOP('',(#93081,#93091,#93099,#93105,#93106,#93107)); +#93081 = ORIENTED_EDGE('',*,*,#93082,.F.); +#93082 = EDGE_CURVE('',#93083,#93085,#93087,.T.); +#93083 = VERTEX_POINT('',#93084); +#93084 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93085 = VERTEX_POINT('',#93086); +#93086 = CARTESIAN_POINT('',(1.725,1.125,0.)); +#93087 = LINE('',#93088,#93089); +#93088 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93089 = VECTOR('',#93090,1.); +#93090 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93091 = ORIENTED_EDGE('',*,*,#93092,.T.); +#93092 = EDGE_CURVE('',#93083,#93093,#93095,.T.); +#93093 = VERTEX_POINT('',#93094); +#93094 = CARTESIAN_POINT('',(2.,1.125,0.2)); +#93095 = LINE('',#93096,#93097); +#93096 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93097 = VECTOR('',#93098,1.); +#93098 = DIRECTION('',(0.,0.,1.)); +#93099 = ORIENTED_EDGE('',*,*,#93100,.T.); +#93100 = EDGE_CURVE('',#93093,#92802,#93101,.T.); +#93101 = LINE('',#93102,#93103); +#93102 = CARTESIAN_POINT('',(2.,1.125,0.2)); +#93103 = VECTOR('',#93104,1.); +#93104 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93105 = ORIENTED_EDGE('',*,*,#92809,.T.); +#93106 = ORIENTED_EDGE('',*,*,#91210,.F.); +#93107 = ORIENTED_EDGE('',*,*,#93108,.F.); +#93108 = EDGE_CURVE('',#93085,#91202,#93109,.T.); +#93109 = LINE('',#93110,#93111); +#93110 = CARTESIAN_POINT('',(1.725,1.125,0.)); +#93111 = VECTOR('',#93112,1.); +#93112 = DIRECTION('',(0.,0.,1.)); +#93113 = PLANE('',#93114); +#93114 = AXIS2_PLACEMENT_3D('',#93115,#93116,#93117); +#93115 = CARTESIAN_POINT('',(2.,1.125,0.)); +#93116 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93117 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93118 = ADVANCED_FACE('',(#93119),#93138,.T.); +#93119 = FACE_BOUND('',#93120,.T.); +#93120 = EDGE_LOOP('',(#93121,#93122,#93123,#93131)); +#93121 = ORIENTED_EDGE('',*,*,#93052,.T.); +#93122 = ORIENTED_EDGE('',*,*,#90822,.T.); +#93123 = ORIENTED_EDGE('',*,*,#93124,.F.); +#93124 = EDGE_CURVE('',#93125,#90823,#93127,.T.); +#93125 = VERTEX_POINT('',#93126); +#93126 = CARTESIAN_POINT('',(-1.725,-1.625,0.)); +#93127 = LINE('',#93128,#93129); +#93128 = CARTESIAN_POINT('',(-1.725,-1.625,0.)); +#93129 = VECTOR('',#93130,1.); +#93130 = DIRECTION('',(0.,0.,1.)); +#93131 = ORIENTED_EDGE('',*,*,#93132,.T.); +#93132 = EDGE_CURVE('',#93125,#93043,#93133,.T.); +#93133 = CIRCLE('',#93134,0.125); +#93134 = AXIS2_PLACEMENT_3D('',#93135,#93136,#93137); +#93135 = CARTESIAN_POINT('',(-1.725,-1.5,0.)); +#93136 = DIRECTION('',(0.,0.,1.)); +#93137 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#93138 = CYLINDRICAL_SURFACE('',#93139,0.125); +#93139 = AXIS2_PLACEMENT_3D('',#93140,#93141,#93142); +#93140 = CARTESIAN_POINT('',(-1.725,-1.5,0.)); +#93141 = DIRECTION('',(0.,0.,-1.)); +#93142 = DIRECTION('',(-4.669739647545E-16,-1.,-0.)); +#93143 = ADVANCED_FACE('',(#93144),#93163,.T.); +#93144 = FACE_BOUND('',#93145,.T.); +#93145 = EDGE_LOOP('',(#93146,#93154,#93155,#93156)); +#93146 = ORIENTED_EDGE('',*,*,#93147,.T.); +#93147 = EDGE_CURVE('',#93148,#91194,#93150,.T.); +#93148 = VERTEX_POINT('',#93149); +#93149 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93150 = LINE('',#93151,#93152); +#93151 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93152 = VECTOR('',#93153,1.); +#93153 = DIRECTION('',(0.,0.,1.)); +#93154 = ORIENTED_EDGE('',*,*,#91201,.T.); +#93155 = ORIENTED_EDGE('',*,*,#93108,.F.); +#93156 = ORIENTED_EDGE('',*,*,#93157,.T.); +#93157 = EDGE_CURVE('',#93085,#93148,#93158,.T.); +#93158 = CIRCLE('',#93159,0.125); +#93159 = AXIS2_PLACEMENT_3D('',#93160,#93161,#93162); +#93160 = CARTESIAN_POINT('',(1.725,1.,0.)); +#93161 = DIRECTION('',(0.,-0.,1.)); +#93162 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93163 = CYLINDRICAL_SURFACE('',#93164,0.125); +#93164 = AXIS2_PLACEMENT_3D('',#93165,#93166,#93167); +#93165 = CARTESIAN_POINT('',(1.725,1.,0.)); +#93166 = DIRECTION('',(0.,-0.,-1.)); +#93167 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93168 = ADVANCED_FACE('',(#93169),#93196,.F.); +#93169 = FACE_BOUND('',#93170,.F.); +#93170 = EDGE_LOOP('',(#93171,#93179,#93187,#93193,#93194,#93195)); +#93171 = ORIENTED_EDGE('',*,*,#93172,.F.); +#93172 = EDGE_CURVE('',#93173,#93125,#93175,.T.); +#93173 = VERTEX_POINT('',#93174); +#93174 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93175 = LINE('',#93176,#93177); +#93176 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93177 = VECTOR('',#93178,1.); +#93178 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93179 = ORIENTED_EDGE('',*,*,#93180,.T.); +#93180 = EDGE_CURVE('',#93173,#93181,#93183,.T.); +#93181 = VERTEX_POINT('',#93182); +#93182 = CARTESIAN_POINT('',(-2.,-1.625,0.2)); +#93183 = LINE('',#93184,#93185); +#93184 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93185 = VECTOR('',#93186,1.); +#93186 = DIRECTION('',(0.,0.,1.)); +#93187 = ORIENTED_EDGE('',*,*,#93188,.T.); +#93188 = EDGE_CURVE('',#93181,#91612,#93189,.T.); +#93189 = LINE('',#93190,#93191); +#93190 = CARTESIAN_POINT('',(-2.,-1.625,0.2)); +#93191 = VECTOR('',#93192,1.); +#93192 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93193 = ORIENTED_EDGE('',*,*,#91611,.F.); +#93194 = ORIENTED_EDGE('',*,*,#90831,.F.); +#93195 = ORIENTED_EDGE('',*,*,#93124,.F.); +#93196 = PLANE('',#93197); +#93197 = AXIS2_PLACEMENT_3D('',#93198,#93199,#93200); +#93198 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#93199 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#93200 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#93201 = ADVANCED_FACE('',(#93202),#93229,.F.); +#93202 = FACE_BOUND('',#93203,.F.); +#93203 = EDGE_LOOP('',(#93204,#93212,#93213,#93214,#93215,#93223)); +#93204 = ORIENTED_EDGE('',*,*,#93205,.F.); +#93205 = EDGE_CURVE('',#93148,#93206,#93208,.T.); +#93206 = VERTEX_POINT('',#93207); +#93207 = CARTESIAN_POINT('',(2.,0.875,0.)); +#93208 = LINE('',#93209,#93210); +#93209 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93210 = VECTOR('',#93211,1.); +#93211 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93212 = ORIENTED_EDGE('',*,*,#93147,.T.); +#93213 = ORIENTED_EDGE('',*,*,#91193,.F.); +#93214 = ORIENTED_EDGE('',*,*,#92793,.T.); +#93215 = ORIENTED_EDGE('',*,*,#93216,.T.); +#93216 = EDGE_CURVE('',#92794,#93217,#93219,.T.); +#93217 = VERTEX_POINT('',#93218); +#93218 = CARTESIAN_POINT('',(2.,0.875,0.2)); +#93219 = LINE('',#93220,#93221); +#93220 = CARTESIAN_POINT('',(1.725,0.875,0.2)); +#93221 = VECTOR('',#93222,1.); +#93222 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93223 = ORIENTED_EDGE('',*,*,#93224,.F.); +#93224 = EDGE_CURVE('',#93206,#93217,#93225,.T.); +#93225 = LINE('',#93226,#93227); +#93226 = CARTESIAN_POINT('',(2.,0.875,0.)); +#93227 = VECTOR('',#93228,1.); +#93228 = DIRECTION('',(0.,0.,1.)); +#93229 = PLANE('',#93230); +#93230 = AXIS2_PLACEMENT_3D('',#93231,#93232,#93233); +#93231 = CARTESIAN_POINT('',(1.725,0.875,0.)); +#93232 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93233 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93234 = ADVANCED_FACE('',(#93235),#93361,.T.); +#93235 = FACE_BOUND('',#93236,.T.); +#93236 = EDGE_LOOP('',(#93237,#93243,#93244,#93245,#93253,#93261,#93267, + #93268,#93276,#93284,#93290,#93291,#93299,#93307,#93313,#93314, + #93322,#93330,#93336,#93337,#93345,#93353,#93359,#93360)); +#93237 = ORIENTED_EDGE('',*,*,#93238,.F.); +#93238 = EDGE_CURVE('',#91597,#92664,#93239,.T.); +#93239 = LINE('',#93240,#93241); +#93240 = CARTESIAN_POINT('',(-1.99,-2.49,0.77)); +#93241 = VECTOR('',#93242,1.); +#93242 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93243 = ORIENTED_EDGE('',*,*,#91604,.F.); +#93244 = ORIENTED_EDGE('',*,*,#90847,.T.); +#93245 = ORIENTED_EDGE('',*,*,#93246,.T.); +#93246 = EDGE_CURVE('',#90848,#93247,#93249,.T.); +#93247 = VERTEX_POINT('',#93248); +#93248 = CARTESIAN_POINT('',(-1.125,-2.49,0.2)); +#93249 = LINE('',#93250,#93251); +#93250 = CARTESIAN_POINT('',(-1.125,-2.49,1.E-02)); +#93251 = VECTOR('',#93252,1.); +#93252 = DIRECTION('',(0.,0.,1.)); +#93253 = ORIENTED_EDGE('',*,*,#93254,.T.); +#93254 = EDGE_CURVE('',#93247,#93255,#93257,.T.); +#93255 = VERTEX_POINT('',#93256); +#93256 = CARTESIAN_POINT('',(-0.875,-2.49,0.2)); +#93257 = LINE('',#93258,#93259); +#93258 = CARTESIAN_POINT('',(-1.4325,-2.49,0.2)); +#93259 = VECTOR('',#93260,1.); +#93260 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93261 = ORIENTED_EDGE('',*,*,#93262,.T.); +#93262 = EDGE_CURVE('',#93255,#90873,#93263,.T.); +#93263 = LINE('',#93264,#93265); +#93264 = CARTESIAN_POINT('',(-0.875,-2.49,1.E-02)); +#93265 = VECTOR('',#93266,1.); +#93266 = DIRECTION('',(-0.,0.,-1.)); +#93267 = ORIENTED_EDGE('',*,*,#90880,.T.); +#93268 = ORIENTED_EDGE('',*,*,#93269,.T.); +#93269 = EDGE_CURVE('',#90881,#93270,#93272,.T.); +#93270 = VERTEX_POINT('',#93271); +#93271 = CARTESIAN_POINT('',(-0.625,-2.49,0.2)); +#93272 = LINE('',#93273,#93274); +#93273 = CARTESIAN_POINT('',(-0.625,-2.49,1.E-02)); +#93274 = VECTOR('',#93275,1.); +#93275 = DIRECTION('',(0.,0.,1.)); +#93276 = ORIENTED_EDGE('',*,*,#93277,.T.); +#93277 = EDGE_CURVE('',#93270,#93278,#93280,.T.); +#93278 = VERTEX_POINT('',#93279); +#93279 = CARTESIAN_POINT('',(-0.375,-2.49,0.2)); +#93280 = LINE('',#93281,#93282); +#93281 = CARTESIAN_POINT('',(-1.1825,-2.49,0.2)); +#93282 = VECTOR('',#93283,1.); +#93283 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93284 = ORIENTED_EDGE('',*,*,#93285,.T.); +#93285 = EDGE_CURVE('',#93278,#90906,#93286,.T.); +#93286 = LINE('',#93287,#93288); +#93287 = CARTESIAN_POINT('',(-0.375,-2.49,1.E-02)); +#93288 = VECTOR('',#93289,1.); +#93289 = DIRECTION('',(-0.,0.,-1.)); +#93290 = ORIENTED_EDGE('',*,*,#90913,.T.); +#93291 = ORIENTED_EDGE('',*,*,#93292,.T.); +#93292 = EDGE_CURVE('',#90914,#93293,#93295,.T.); +#93293 = VERTEX_POINT('',#93294); +#93294 = CARTESIAN_POINT('',(-0.125,-2.49,0.2)); +#93295 = LINE('',#93296,#93297); +#93296 = CARTESIAN_POINT('',(-0.125,-2.49,1.E-02)); +#93297 = VECTOR('',#93298,1.); +#93298 = DIRECTION('',(0.,0.,1.)); +#93299 = ORIENTED_EDGE('',*,*,#93300,.T.); +#93300 = EDGE_CURVE('',#93293,#93301,#93303,.T.); +#93301 = VERTEX_POINT('',#93302); +#93302 = CARTESIAN_POINT('',(0.125,-2.49,0.2)); +#93303 = LINE('',#93304,#93305); +#93304 = CARTESIAN_POINT('',(-0.9325,-2.49,0.2)); +#93305 = VECTOR('',#93306,1.); +#93306 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93307 = ORIENTED_EDGE('',*,*,#93308,.T.); +#93308 = EDGE_CURVE('',#93301,#90939,#93309,.T.); +#93309 = LINE('',#93310,#93311); +#93310 = CARTESIAN_POINT('',(0.125,-2.49,1.E-02)); +#93311 = VECTOR('',#93312,1.); +#93312 = DIRECTION('',(-0.,0.,-1.)); +#93313 = ORIENTED_EDGE('',*,*,#90946,.T.); +#93314 = ORIENTED_EDGE('',*,*,#93315,.T.); +#93315 = EDGE_CURVE('',#90947,#93316,#93318,.T.); +#93316 = VERTEX_POINT('',#93317); +#93317 = CARTESIAN_POINT('',(0.375,-2.49,0.2)); +#93318 = LINE('',#93319,#93320); +#93319 = CARTESIAN_POINT('',(0.375,-2.49,1.E-02)); +#93320 = VECTOR('',#93321,1.); +#93321 = DIRECTION('',(0.,0.,1.)); +#93322 = ORIENTED_EDGE('',*,*,#93323,.T.); +#93323 = EDGE_CURVE('',#93316,#93324,#93326,.T.); +#93324 = VERTEX_POINT('',#93325); +#93325 = CARTESIAN_POINT('',(0.625,-2.49,0.2)); +#93326 = LINE('',#93327,#93328); +#93327 = CARTESIAN_POINT('',(-0.6825,-2.49,0.2)); +#93328 = VECTOR('',#93329,1.); +#93329 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93330 = ORIENTED_EDGE('',*,*,#93331,.T.); +#93331 = EDGE_CURVE('',#93324,#90972,#93332,.T.); +#93332 = LINE('',#93333,#93334); +#93333 = CARTESIAN_POINT('',(0.625,-2.49,1.E-02)); +#93334 = VECTOR('',#93335,1.); +#93335 = DIRECTION('',(-0.,0.,-1.)); +#93336 = ORIENTED_EDGE('',*,*,#90979,.T.); +#93337 = ORIENTED_EDGE('',*,*,#93338,.T.); +#93338 = EDGE_CURVE('',#90980,#93339,#93341,.T.); +#93339 = VERTEX_POINT('',#93340); +#93340 = CARTESIAN_POINT('',(0.875,-2.49,0.2)); +#93341 = LINE('',#93342,#93343); +#93342 = CARTESIAN_POINT('',(0.875,-2.49,1.E-02)); +#93343 = VECTOR('',#93344,1.); +#93344 = DIRECTION('',(0.,0.,1.)); +#93345 = ORIENTED_EDGE('',*,*,#93346,.T.); +#93346 = EDGE_CURVE('',#93339,#93347,#93349,.T.); +#93347 = VERTEX_POINT('',#93348); +#93348 = CARTESIAN_POINT('',(1.125,-2.49,0.2)); +#93349 = LINE('',#93350,#93351); +#93350 = CARTESIAN_POINT('',(-0.4325,-2.49,0.2)); +#93351 = VECTOR('',#93352,1.); +#93352 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#93353 = ORIENTED_EDGE('',*,*,#93354,.T.); +#93354 = EDGE_CURVE('',#93347,#91005,#93355,.T.); +#93355 = LINE('',#93356,#93357); +#93356 = CARTESIAN_POINT('',(1.125,-2.49,1.E-02)); +#93357 = VECTOR('',#93358,1.); +#93358 = DIRECTION('',(-0.,0.,-1.)); +#93359 = ORIENTED_EDGE('',*,*,#91012,.T.); +#93360 = ORIENTED_EDGE('',*,*,#92671,.T.); +#93361 = PLANE('',#93362); +#93362 = AXIS2_PLACEMENT_3D('',#93363,#93364,#93365); +#93363 = CARTESIAN_POINT('',(-1.99,-2.49,2.E-02)); +#93364 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#93365 = DIRECTION('',(0.,0.,1.)); +#93366 = ADVANCED_FACE('',(#93367),#93401,.F.); +#93367 = FACE_BOUND('',#93368,.F.); +#93368 = EDGE_LOOP('',(#93369,#93379,#93387,#93393,#93394,#93395)); +#93369 = ORIENTED_EDGE('',*,*,#93370,.F.); +#93370 = EDGE_CURVE('',#93371,#93373,#93375,.T.); +#93371 = VERTEX_POINT('',#93372); +#93372 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93373 = VERTEX_POINT('',#93374); +#93374 = CARTESIAN_POINT('',(1.725,0.625,0.)); +#93375 = LINE('',#93376,#93377); +#93376 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93377 = VECTOR('',#93378,1.); +#93378 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93379 = ORIENTED_EDGE('',*,*,#93380,.T.); +#93380 = EDGE_CURVE('',#93371,#93381,#93383,.T.); +#93381 = VERTEX_POINT('',#93382); +#93382 = CARTESIAN_POINT('',(2.,0.625,0.2)); +#93383 = LINE('',#93384,#93385); +#93384 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93385 = VECTOR('',#93386,1.); +#93386 = DIRECTION('',(0.,0.,1.)); +#93387 = ORIENTED_EDGE('',*,*,#93388,.T.); +#93388 = EDGE_CURVE('',#93381,#92779,#93389,.T.); +#93389 = LINE('',#93390,#93391); +#93390 = CARTESIAN_POINT('',(2.,0.625,0.2)); +#93391 = VECTOR('',#93392,1.); +#93392 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93393 = ORIENTED_EDGE('',*,*,#92786,.T.); +#93394 = ORIENTED_EDGE('',*,*,#91177,.F.); +#93395 = ORIENTED_EDGE('',*,*,#93396,.F.); +#93396 = EDGE_CURVE('',#93373,#91169,#93397,.T.); +#93397 = LINE('',#93398,#93399); +#93398 = CARTESIAN_POINT('',(1.725,0.625,0.)); +#93399 = VECTOR('',#93400,1.); +#93400 = DIRECTION('',(0.,0.,1.)); +#93401 = PLANE('',#93402); +#93402 = AXIS2_PLACEMENT_3D('',#93403,#93404,#93405); +#93403 = CARTESIAN_POINT('',(2.,0.625,0.)); +#93404 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93405 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93406 = ADVANCED_FACE('',(#93407),#93441,.F.); +#93407 = FACE_BOUND('',#93408,.F.); +#93408 = EDGE_LOOP('',(#93409,#93419,#93425,#93426,#93427,#93435)); +#93409 = ORIENTED_EDGE('',*,*,#93410,.F.); +#93410 = EDGE_CURVE('',#93411,#93413,#93415,.T.); +#93411 = VERTEX_POINT('',#93412); +#93412 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93413 = VERTEX_POINT('',#93414); +#93414 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#93415 = LINE('',#93416,#93417); +#93416 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93417 = VECTOR('',#93418,1.); +#93418 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93419 = ORIENTED_EDGE('',*,*,#93420,.T.); +#93420 = EDGE_CURVE('',#93411,#90856,#93421,.T.); +#93421 = LINE('',#93422,#93423); +#93422 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93423 = VECTOR('',#93424,1.); +#93424 = DIRECTION('',(0.,0.,1.)); +#93425 = ORIENTED_EDGE('',*,*,#90855,.F.); +#93426 = ORIENTED_EDGE('',*,*,#93246,.T.); +#93427 = ORIENTED_EDGE('',*,*,#93428,.T.); +#93428 = EDGE_CURVE('',#93247,#93429,#93431,.T.); +#93429 = VERTEX_POINT('',#93430); +#93430 = CARTESIAN_POINT('',(-1.125,-2.5,0.2)); +#93431 = LINE('',#93432,#93433); +#93432 = CARTESIAN_POINT('',(-1.125,-2.225,0.2)); +#93433 = VECTOR('',#93434,1.); +#93434 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93435 = ORIENTED_EDGE('',*,*,#93436,.F.); +#93436 = EDGE_CURVE('',#93413,#93429,#93437,.T.); +#93437 = LINE('',#93438,#93439); +#93438 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#93439 = VECTOR('',#93440,1.); +#93440 = DIRECTION('',(0.,0.,1.)); +#93441 = PLANE('',#93442); +#93442 = AXIS2_PLACEMENT_3D('',#93443,#93444,#93445); +#93443 = CARTESIAN_POINT('',(-1.125,-2.225,0.)); +#93444 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93445 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93446 = ADVANCED_FACE('',(#93447),#93466,.T.); +#93447 = FACE_BOUND('',#93448,.T.); +#93448 = EDGE_LOOP('',(#93449,#93457,#93458,#93459)); +#93449 = ORIENTED_EDGE('',*,*,#93450,.T.); +#93450 = EDGE_CURVE('',#93451,#91161,#93453,.T.); +#93451 = VERTEX_POINT('',#93452); +#93452 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93453 = LINE('',#93454,#93455); +#93454 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93455 = VECTOR('',#93456,1.); +#93456 = DIRECTION('',(0.,0.,1.)); +#93457 = ORIENTED_EDGE('',*,*,#91168,.T.); +#93458 = ORIENTED_EDGE('',*,*,#93396,.F.); +#93459 = ORIENTED_EDGE('',*,*,#93460,.T.); +#93460 = EDGE_CURVE('',#93373,#93451,#93461,.T.); +#93461 = CIRCLE('',#93462,0.125); +#93462 = AXIS2_PLACEMENT_3D('',#93463,#93464,#93465); +#93463 = CARTESIAN_POINT('',(1.725,0.5,0.)); +#93464 = DIRECTION('',(0.,-0.,1.)); +#93465 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93466 = CYLINDRICAL_SURFACE('',#93467,0.125); +#93467 = AXIS2_PLACEMENT_3D('',#93468,#93469,#93470); +#93468 = CARTESIAN_POINT('',(1.725,0.5,0.)); +#93469 = DIRECTION('',(0.,-0.,-1.)); +#93470 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93471 = ADVANCED_FACE('',(#93472),#93491,.T.); +#93472 = FACE_BOUND('',#93473,.T.); +#93473 = EDGE_LOOP('',(#93474,#93475,#93476,#93484)); +#93474 = ORIENTED_EDGE('',*,*,#93420,.T.); +#93475 = ORIENTED_EDGE('',*,*,#90863,.T.); +#93476 = ORIENTED_EDGE('',*,*,#93477,.F.); +#93477 = EDGE_CURVE('',#93478,#90864,#93480,.T.); +#93478 = VERTEX_POINT('',#93479); +#93479 = CARTESIAN_POINT('',(-0.875,-2.225,0.)); +#93480 = LINE('',#93481,#93482); +#93481 = CARTESIAN_POINT('',(-0.875,-2.225,0.)); +#93482 = VECTOR('',#93483,1.); +#93483 = DIRECTION('',(0.,0.,1.)); +#93484 = ORIENTED_EDGE('',*,*,#93485,.T.); +#93485 = EDGE_CURVE('',#93478,#93411,#93486,.T.); +#93486 = CIRCLE('',#93487,0.125); +#93487 = AXIS2_PLACEMENT_3D('',#93488,#93489,#93490); +#93488 = CARTESIAN_POINT('',(-1.,-2.225,0.)); +#93489 = DIRECTION('',(-0.,0.,1.)); +#93490 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93491 = CYLINDRICAL_SURFACE('',#93492,0.125); +#93492 = AXIS2_PLACEMENT_3D('',#93493,#93494,#93495); +#93493 = CARTESIAN_POINT('',(-1.,-2.225,0.)); +#93494 = DIRECTION('',(-0.,0.,-1.)); +#93495 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#93496 = ADVANCED_FACE('',(#93497),#93524,.F.); +#93497 = FACE_BOUND('',#93498,.F.); +#93498 = EDGE_LOOP('',(#93499,#93507,#93508,#93509,#93510,#93518)); +#93499 = ORIENTED_EDGE('',*,*,#93500,.F.); +#93500 = EDGE_CURVE('',#93451,#93501,#93503,.T.); +#93501 = VERTEX_POINT('',#93502); +#93502 = CARTESIAN_POINT('',(2.,0.375,0.)); +#93503 = LINE('',#93504,#93505); +#93504 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93505 = VECTOR('',#93506,1.); +#93506 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93507 = ORIENTED_EDGE('',*,*,#93450,.T.); +#93508 = ORIENTED_EDGE('',*,*,#91160,.F.); +#93509 = ORIENTED_EDGE('',*,*,#92770,.T.); +#93510 = ORIENTED_EDGE('',*,*,#93511,.T.); +#93511 = EDGE_CURVE('',#92771,#93512,#93514,.T.); +#93512 = VERTEX_POINT('',#93513); +#93513 = CARTESIAN_POINT('',(2.,0.375,0.2)); +#93514 = LINE('',#93515,#93516); +#93515 = CARTESIAN_POINT('',(1.725,0.375,0.2)); +#93516 = VECTOR('',#93517,1.); +#93517 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93518 = ORIENTED_EDGE('',*,*,#93519,.F.); +#93519 = EDGE_CURVE('',#93501,#93512,#93520,.T.); +#93520 = LINE('',#93521,#93522); +#93521 = CARTESIAN_POINT('',(2.,0.375,0.)); +#93522 = VECTOR('',#93523,1.); +#93523 = DIRECTION('',(0.,0.,1.)); +#93524 = PLANE('',#93525); +#93525 = AXIS2_PLACEMENT_3D('',#93526,#93527,#93528); +#93526 = CARTESIAN_POINT('',(1.725,0.375,0.)); +#93527 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93528 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93529 = ADVANCED_FACE('',(#93530),#93557,.F.); +#93530 = FACE_BOUND('',#93531,.F.); +#93531 = EDGE_LOOP('',(#93532,#93540,#93548,#93554,#93555,#93556)); +#93532 = ORIENTED_EDGE('',*,*,#93533,.F.); +#93533 = EDGE_CURVE('',#93534,#93478,#93536,.T.); +#93534 = VERTEX_POINT('',#93535); +#93535 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93536 = LINE('',#93537,#93538); +#93537 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93538 = VECTOR('',#93539,1.); +#93539 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93540 = ORIENTED_EDGE('',*,*,#93541,.T.); +#93541 = EDGE_CURVE('',#93534,#93542,#93544,.T.); +#93542 = VERTEX_POINT('',#93543); +#93543 = CARTESIAN_POINT('',(-0.875,-2.5,0.2)); +#93544 = LINE('',#93545,#93546); +#93545 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93546 = VECTOR('',#93547,1.); +#93547 = DIRECTION('',(0.,0.,1.)); +#93548 = ORIENTED_EDGE('',*,*,#93549,.T.); +#93549 = EDGE_CURVE('',#93542,#93255,#93550,.T.); +#93550 = LINE('',#93551,#93552); +#93551 = CARTESIAN_POINT('',(-0.875,-2.5,0.2)); +#93552 = VECTOR('',#93553,1.); +#93553 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93554 = ORIENTED_EDGE('',*,*,#93262,.T.); +#93555 = ORIENTED_EDGE('',*,*,#90872,.F.); +#93556 = ORIENTED_EDGE('',*,*,#93477,.F.); +#93557 = PLANE('',#93558); +#93558 = AXIS2_PLACEMENT_3D('',#93559,#93560,#93561); +#93559 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#93560 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#93561 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93562 = ADVANCED_FACE('',(#93563),#93597,.F.); +#93563 = FACE_BOUND('',#93564,.F.); +#93564 = EDGE_LOOP('',(#93565,#93575,#93583,#93589,#93590,#93591)); +#93565 = ORIENTED_EDGE('',*,*,#93566,.F.); +#93566 = EDGE_CURVE('',#93567,#93569,#93571,.T.); +#93567 = VERTEX_POINT('',#93568); +#93568 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93569 = VERTEX_POINT('',#93570); +#93570 = CARTESIAN_POINT('',(1.725,0.125,0.)); +#93571 = LINE('',#93572,#93573); +#93572 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93573 = VECTOR('',#93574,1.); +#93574 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93575 = ORIENTED_EDGE('',*,*,#93576,.T.); +#93576 = EDGE_CURVE('',#93567,#93577,#93579,.T.); +#93577 = VERTEX_POINT('',#93578); +#93578 = CARTESIAN_POINT('',(2.,0.125,0.2)); +#93579 = LINE('',#93580,#93581); +#93580 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93581 = VECTOR('',#93582,1.); +#93582 = DIRECTION('',(0.,0.,1.)); +#93583 = ORIENTED_EDGE('',*,*,#93584,.T.); +#93584 = EDGE_CURVE('',#93577,#92756,#93585,.T.); +#93585 = LINE('',#93586,#93587); +#93586 = CARTESIAN_POINT('',(2.,0.125,0.2)); +#93587 = VECTOR('',#93588,1.); +#93588 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93589 = ORIENTED_EDGE('',*,*,#92763,.T.); +#93590 = ORIENTED_EDGE('',*,*,#91144,.F.); +#93591 = ORIENTED_EDGE('',*,*,#93592,.F.); +#93592 = EDGE_CURVE('',#93569,#91136,#93593,.T.); +#93593 = LINE('',#93594,#93595); +#93594 = CARTESIAN_POINT('',(1.725,0.125,0.)); +#93595 = VECTOR('',#93596,1.); +#93596 = DIRECTION('',(0.,0.,1.)); +#93597 = PLANE('',#93598); +#93598 = AXIS2_PLACEMENT_3D('',#93599,#93600,#93601); +#93599 = CARTESIAN_POINT('',(2.,0.125,0.)); +#93600 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93601 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93602 = ADVANCED_FACE('',(#93603),#93637,.F.); +#93603 = FACE_BOUND('',#93604,.F.); +#93604 = EDGE_LOOP('',(#93605,#93615,#93621,#93622,#93623,#93631)); +#93605 = ORIENTED_EDGE('',*,*,#93606,.F.); +#93606 = EDGE_CURVE('',#93607,#93609,#93611,.T.); +#93607 = VERTEX_POINT('',#93608); +#93608 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93609 = VERTEX_POINT('',#93610); +#93610 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#93611 = LINE('',#93612,#93613); +#93612 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93613 = VECTOR('',#93614,1.); +#93614 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93615 = ORIENTED_EDGE('',*,*,#93616,.T.); +#93616 = EDGE_CURVE('',#93607,#90889,#93617,.T.); +#93617 = LINE('',#93618,#93619); +#93618 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93619 = VECTOR('',#93620,1.); +#93620 = DIRECTION('',(0.,0.,1.)); +#93621 = ORIENTED_EDGE('',*,*,#90888,.F.); +#93622 = ORIENTED_EDGE('',*,*,#93269,.T.); +#93623 = ORIENTED_EDGE('',*,*,#93624,.T.); +#93624 = EDGE_CURVE('',#93270,#93625,#93627,.T.); +#93625 = VERTEX_POINT('',#93626); +#93626 = CARTESIAN_POINT('',(-0.625,-2.5,0.2)); +#93627 = LINE('',#93628,#93629); +#93628 = CARTESIAN_POINT('',(-0.625,-2.225,0.2)); +#93629 = VECTOR('',#93630,1.); +#93630 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93631 = ORIENTED_EDGE('',*,*,#93632,.F.); +#93632 = EDGE_CURVE('',#93609,#93625,#93633,.T.); +#93633 = LINE('',#93634,#93635); +#93634 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#93635 = VECTOR('',#93636,1.); +#93636 = DIRECTION('',(0.,0.,1.)); +#93637 = PLANE('',#93638); +#93638 = AXIS2_PLACEMENT_3D('',#93639,#93640,#93641); +#93639 = CARTESIAN_POINT('',(-0.625,-2.225,0.)); +#93640 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93641 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93642 = ADVANCED_FACE('',(#93643),#93662,.T.); +#93643 = FACE_BOUND('',#93644,.T.); +#93644 = EDGE_LOOP('',(#93645,#93653,#93654,#93655)); +#93645 = ORIENTED_EDGE('',*,*,#93646,.T.); +#93646 = EDGE_CURVE('',#93647,#91128,#93649,.T.); +#93647 = VERTEX_POINT('',#93648); +#93648 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93649 = LINE('',#93650,#93651); +#93650 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93651 = VECTOR('',#93652,1.); +#93652 = DIRECTION('',(0.,0.,1.)); +#93653 = ORIENTED_EDGE('',*,*,#91135,.T.); +#93654 = ORIENTED_EDGE('',*,*,#93592,.F.); +#93655 = ORIENTED_EDGE('',*,*,#93656,.T.); +#93656 = EDGE_CURVE('',#93569,#93647,#93657,.T.); +#93657 = CIRCLE('',#93658,0.125); +#93658 = AXIS2_PLACEMENT_3D('',#93659,#93660,#93661); +#93659 = CARTESIAN_POINT('',(1.725,-3.330669073875E-16,0.)); +#93660 = DIRECTION('',(0.,-0.,1.)); +#93661 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93662 = CYLINDRICAL_SURFACE('',#93663,0.125); +#93663 = AXIS2_PLACEMENT_3D('',#93664,#93665,#93666); +#93664 = CARTESIAN_POINT('',(1.725,-3.330669073875E-16,0.)); +#93665 = DIRECTION('',(0.,-0.,-1.)); +#93666 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93667 = ADVANCED_FACE('',(#93668),#93687,.T.); +#93668 = FACE_BOUND('',#93669,.T.); +#93669 = EDGE_LOOP('',(#93670,#93671,#93672,#93680)); +#93670 = ORIENTED_EDGE('',*,*,#93616,.T.); +#93671 = ORIENTED_EDGE('',*,*,#90896,.T.); +#93672 = ORIENTED_EDGE('',*,*,#93673,.F.); +#93673 = EDGE_CURVE('',#93674,#90897,#93676,.T.); +#93674 = VERTEX_POINT('',#93675); +#93675 = CARTESIAN_POINT('',(-0.375,-2.225,0.)); +#93676 = LINE('',#93677,#93678); +#93677 = CARTESIAN_POINT('',(-0.375,-2.225,0.)); +#93678 = VECTOR('',#93679,1.); +#93679 = DIRECTION('',(0.,0.,1.)); +#93680 = ORIENTED_EDGE('',*,*,#93681,.T.); +#93681 = EDGE_CURVE('',#93674,#93607,#93682,.T.); +#93682 = CIRCLE('',#93683,0.125); +#93683 = AXIS2_PLACEMENT_3D('',#93684,#93685,#93686); +#93684 = CARTESIAN_POINT('',(-0.5,-2.225,0.)); +#93685 = DIRECTION('',(-0.,0.,1.)); +#93686 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93687 = CYLINDRICAL_SURFACE('',#93688,0.125); +#93688 = AXIS2_PLACEMENT_3D('',#93689,#93690,#93691); +#93689 = CARTESIAN_POINT('',(-0.5,-2.225,0.)); +#93690 = DIRECTION('',(-0.,0.,-1.)); +#93691 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#93692 = ADVANCED_FACE('',(#93693),#93720,.F.); +#93693 = FACE_BOUND('',#93694,.F.); +#93694 = EDGE_LOOP('',(#93695,#93703,#93704,#93705,#93706,#93714)); +#93695 = ORIENTED_EDGE('',*,*,#93696,.F.); +#93696 = EDGE_CURVE('',#93647,#93697,#93699,.T.); +#93697 = VERTEX_POINT('',#93698); +#93698 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#93699 = LINE('',#93700,#93701); +#93700 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93701 = VECTOR('',#93702,1.); +#93702 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93703 = ORIENTED_EDGE('',*,*,#93646,.T.); +#93704 = ORIENTED_EDGE('',*,*,#91127,.F.); +#93705 = ORIENTED_EDGE('',*,*,#92747,.T.); +#93706 = ORIENTED_EDGE('',*,*,#93707,.T.); +#93707 = EDGE_CURVE('',#92748,#93708,#93710,.T.); +#93708 = VERTEX_POINT('',#93709); +#93709 = CARTESIAN_POINT('',(2.,-0.125,0.2)); +#93710 = LINE('',#93711,#93712); +#93711 = CARTESIAN_POINT('',(1.725,-0.125,0.2)); +#93712 = VECTOR('',#93713,1.); +#93713 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93714 = ORIENTED_EDGE('',*,*,#93715,.F.); +#93715 = EDGE_CURVE('',#93697,#93708,#93716,.T.); +#93716 = LINE('',#93717,#93718); +#93717 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#93718 = VECTOR('',#93719,1.); +#93719 = DIRECTION('',(0.,0.,1.)); +#93720 = PLANE('',#93721); +#93721 = AXIS2_PLACEMENT_3D('',#93722,#93723,#93724); +#93722 = CARTESIAN_POINT('',(1.725,-0.125,0.)); +#93723 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93724 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93725 = ADVANCED_FACE('',(#93726),#93753,.F.); +#93726 = FACE_BOUND('',#93727,.F.); +#93727 = EDGE_LOOP('',(#93728,#93736,#93744,#93750,#93751,#93752)); +#93728 = ORIENTED_EDGE('',*,*,#93729,.F.); +#93729 = EDGE_CURVE('',#93730,#93674,#93732,.T.); +#93730 = VERTEX_POINT('',#93731); +#93731 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93732 = LINE('',#93733,#93734); +#93733 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93734 = VECTOR('',#93735,1.); +#93735 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93736 = ORIENTED_EDGE('',*,*,#93737,.T.); +#93737 = EDGE_CURVE('',#93730,#93738,#93740,.T.); +#93738 = VERTEX_POINT('',#93739); +#93739 = CARTESIAN_POINT('',(-0.375,-2.5,0.2)); +#93740 = LINE('',#93741,#93742); +#93741 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93742 = VECTOR('',#93743,1.); +#93743 = DIRECTION('',(0.,0.,1.)); +#93744 = ORIENTED_EDGE('',*,*,#93745,.T.); +#93745 = EDGE_CURVE('',#93738,#93278,#93746,.T.); +#93746 = LINE('',#93747,#93748); +#93747 = CARTESIAN_POINT('',(-0.375,-2.5,0.2)); +#93748 = VECTOR('',#93749,1.); +#93749 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93750 = ORIENTED_EDGE('',*,*,#93285,.T.); +#93751 = ORIENTED_EDGE('',*,*,#90905,.F.); +#93752 = ORIENTED_EDGE('',*,*,#93673,.F.); +#93753 = PLANE('',#93754); +#93754 = AXIS2_PLACEMENT_3D('',#93755,#93756,#93757); +#93755 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#93756 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#93757 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93758 = ADVANCED_FACE('',(#93759),#93793,.F.); +#93759 = FACE_BOUND('',#93760,.F.); +#93760 = EDGE_LOOP('',(#93761,#93771,#93779,#93785,#93786,#93787)); +#93761 = ORIENTED_EDGE('',*,*,#93762,.F.); +#93762 = EDGE_CURVE('',#93763,#93765,#93767,.T.); +#93763 = VERTEX_POINT('',#93764); +#93764 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93765 = VERTEX_POINT('',#93766); +#93766 = CARTESIAN_POINT('',(1.725,-0.375,0.)); +#93767 = LINE('',#93768,#93769); +#93768 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93769 = VECTOR('',#93770,1.); +#93770 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93771 = ORIENTED_EDGE('',*,*,#93772,.T.); +#93772 = EDGE_CURVE('',#93763,#93773,#93775,.T.); +#93773 = VERTEX_POINT('',#93774); +#93774 = CARTESIAN_POINT('',(2.,-0.375,0.2)); +#93775 = LINE('',#93776,#93777); +#93776 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93777 = VECTOR('',#93778,1.); +#93778 = DIRECTION('',(0.,0.,1.)); +#93779 = ORIENTED_EDGE('',*,*,#93780,.T.); +#93780 = EDGE_CURVE('',#93773,#92733,#93781,.T.); +#93781 = LINE('',#93782,#93783); +#93782 = CARTESIAN_POINT('',(2.,-0.375,0.2)); +#93783 = VECTOR('',#93784,1.); +#93784 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93785 = ORIENTED_EDGE('',*,*,#92740,.T.); +#93786 = ORIENTED_EDGE('',*,*,#91111,.F.); +#93787 = ORIENTED_EDGE('',*,*,#93788,.F.); +#93788 = EDGE_CURVE('',#93765,#91103,#93789,.T.); +#93789 = LINE('',#93790,#93791); +#93790 = CARTESIAN_POINT('',(1.725,-0.375,0.)); +#93791 = VECTOR('',#93792,1.); +#93792 = DIRECTION('',(0.,0.,1.)); +#93793 = PLANE('',#93794); +#93794 = AXIS2_PLACEMENT_3D('',#93795,#93796,#93797); +#93795 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#93796 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93797 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93798 = ADVANCED_FACE('',(#93799),#93833,.F.); +#93799 = FACE_BOUND('',#93800,.F.); +#93800 = EDGE_LOOP('',(#93801,#93811,#93817,#93818,#93819,#93827)); +#93801 = ORIENTED_EDGE('',*,*,#93802,.F.); +#93802 = EDGE_CURVE('',#93803,#93805,#93807,.T.); +#93803 = VERTEX_POINT('',#93804); +#93804 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93805 = VERTEX_POINT('',#93806); +#93806 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#93807 = LINE('',#93808,#93809); +#93808 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93809 = VECTOR('',#93810,1.); +#93810 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93811 = ORIENTED_EDGE('',*,*,#93812,.T.); +#93812 = EDGE_CURVE('',#93803,#90922,#93813,.T.); +#93813 = LINE('',#93814,#93815); +#93814 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93815 = VECTOR('',#93816,1.); +#93816 = DIRECTION('',(0.,0.,1.)); +#93817 = ORIENTED_EDGE('',*,*,#90921,.F.); +#93818 = ORIENTED_EDGE('',*,*,#93292,.T.); +#93819 = ORIENTED_EDGE('',*,*,#93820,.T.); +#93820 = EDGE_CURVE('',#93293,#93821,#93823,.T.); +#93821 = VERTEX_POINT('',#93822); +#93822 = CARTESIAN_POINT('',(-0.125,-2.5,0.2)); +#93823 = LINE('',#93824,#93825); +#93824 = CARTESIAN_POINT('',(-0.125,-2.225,0.2)); +#93825 = VECTOR('',#93826,1.); +#93826 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93827 = ORIENTED_EDGE('',*,*,#93828,.F.); +#93828 = EDGE_CURVE('',#93805,#93821,#93829,.T.); +#93829 = LINE('',#93830,#93831); +#93830 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#93831 = VECTOR('',#93832,1.); +#93832 = DIRECTION('',(0.,0.,1.)); +#93833 = PLANE('',#93834); +#93834 = AXIS2_PLACEMENT_3D('',#93835,#93836,#93837); +#93835 = CARTESIAN_POINT('',(-0.125,-2.225,0.)); +#93836 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93837 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#93838 = ADVANCED_FACE('',(#93839),#93858,.T.); +#93839 = FACE_BOUND('',#93840,.T.); +#93840 = EDGE_LOOP('',(#93841,#93849,#93850,#93851)); +#93841 = ORIENTED_EDGE('',*,*,#93842,.T.); +#93842 = EDGE_CURVE('',#93843,#91095,#93845,.T.); +#93843 = VERTEX_POINT('',#93844); +#93844 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93845 = LINE('',#93846,#93847); +#93846 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93847 = VECTOR('',#93848,1.); +#93848 = DIRECTION('',(0.,0.,1.)); +#93849 = ORIENTED_EDGE('',*,*,#91102,.T.); +#93850 = ORIENTED_EDGE('',*,*,#93788,.F.); +#93851 = ORIENTED_EDGE('',*,*,#93852,.T.); +#93852 = EDGE_CURVE('',#93765,#93843,#93853,.T.); +#93853 = CIRCLE('',#93854,0.125); +#93854 = AXIS2_PLACEMENT_3D('',#93855,#93856,#93857); +#93855 = CARTESIAN_POINT('',(1.725,-0.5,0.)); +#93856 = DIRECTION('',(0.,-0.,1.)); +#93857 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93858 = CYLINDRICAL_SURFACE('',#93859,0.125); +#93859 = AXIS2_PLACEMENT_3D('',#93860,#93861,#93862); +#93860 = CARTESIAN_POINT('',(1.725,-0.5,0.)); +#93861 = DIRECTION('',(0.,-0.,-1.)); +#93862 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93863 = ADVANCED_FACE('',(#93864),#93883,.T.); +#93864 = FACE_BOUND('',#93865,.T.); +#93865 = EDGE_LOOP('',(#93866,#93867,#93868,#93876)); +#93866 = ORIENTED_EDGE('',*,*,#93812,.T.); +#93867 = ORIENTED_EDGE('',*,*,#90929,.T.); +#93868 = ORIENTED_EDGE('',*,*,#93869,.F.); +#93869 = EDGE_CURVE('',#93870,#90930,#93872,.T.); +#93870 = VERTEX_POINT('',#93871); +#93871 = CARTESIAN_POINT('',(0.125,-2.225,0.)); +#93872 = LINE('',#93873,#93874); +#93873 = CARTESIAN_POINT('',(0.125,-2.225,0.)); +#93874 = VECTOR('',#93875,1.); +#93875 = DIRECTION('',(0.,0.,1.)); +#93876 = ORIENTED_EDGE('',*,*,#93877,.T.); +#93877 = EDGE_CURVE('',#93870,#93803,#93878,.T.); +#93878 = CIRCLE('',#93879,0.125); +#93879 = AXIS2_PLACEMENT_3D('',#93880,#93881,#93882); +#93880 = CARTESIAN_POINT('',(-9.159339953158E-16,-2.225,0.)); +#93881 = DIRECTION('',(-0.,0.,1.)); +#93882 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#93883 = CYLINDRICAL_SURFACE('',#93884,0.125); +#93884 = AXIS2_PLACEMENT_3D('',#93885,#93886,#93887); +#93885 = CARTESIAN_POINT('',(-9.159339953158E-16,-2.225,0.)); +#93886 = DIRECTION('',(-0.,0.,-1.)); +#93887 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#93888 = ADVANCED_FACE('',(#93889),#93916,.F.); +#93889 = FACE_BOUND('',#93890,.F.); +#93890 = EDGE_LOOP('',(#93891,#93899,#93900,#93901,#93902,#93910)); +#93891 = ORIENTED_EDGE('',*,*,#93892,.F.); +#93892 = EDGE_CURVE('',#93843,#93893,#93895,.T.); +#93893 = VERTEX_POINT('',#93894); +#93894 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#93895 = LINE('',#93896,#93897); +#93896 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93897 = VECTOR('',#93898,1.); +#93898 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93899 = ORIENTED_EDGE('',*,*,#93842,.T.); +#93900 = ORIENTED_EDGE('',*,*,#91094,.F.); +#93901 = ORIENTED_EDGE('',*,*,#92724,.T.); +#93902 = ORIENTED_EDGE('',*,*,#93903,.T.); +#93903 = EDGE_CURVE('',#92725,#93904,#93906,.T.); +#93904 = VERTEX_POINT('',#93905); +#93905 = CARTESIAN_POINT('',(2.,-0.625,0.2)); +#93906 = LINE('',#93907,#93908); +#93907 = CARTESIAN_POINT('',(1.725,-0.625,0.2)); +#93908 = VECTOR('',#93909,1.); +#93909 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93910 = ORIENTED_EDGE('',*,*,#93911,.F.); +#93911 = EDGE_CURVE('',#93893,#93904,#93912,.T.); +#93912 = LINE('',#93913,#93914); +#93913 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#93914 = VECTOR('',#93915,1.); +#93915 = DIRECTION('',(0.,0.,1.)); +#93916 = PLANE('',#93917); +#93917 = AXIS2_PLACEMENT_3D('',#93918,#93919,#93920); +#93918 = CARTESIAN_POINT('',(1.725,-0.625,0.)); +#93919 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#93920 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#93921 = ADVANCED_FACE('',(#93922),#93949,.F.); +#93922 = FACE_BOUND('',#93923,.F.); +#93923 = EDGE_LOOP('',(#93924,#93932,#93940,#93946,#93947,#93948)); +#93924 = ORIENTED_EDGE('',*,*,#93925,.F.); +#93925 = EDGE_CURVE('',#93926,#93870,#93928,.T.); +#93926 = VERTEX_POINT('',#93927); +#93927 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93928 = LINE('',#93929,#93930); +#93929 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93930 = VECTOR('',#93931,1.); +#93931 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93932 = ORIENTED_EDGE('',*,*,#93933,.T.); +#93933 = EDGE_CURVE('',#93926,#93934,#93936,.T.); +#93934 = VERTEX_POINT('',#93935); +#93935 = CARTESIAN_POINT('',(0.125,-2.5,0.2)); +#93936 = LINE('',#93937,#93938); +#93937 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93938 = VECTOR('',#93939,1.); +#93939 = DIRECTION('',(0.,0.,1.)); +#93940 = ORIENTED_EDGE('',*,*,#93941,.T.); +#93941 = EDGE_CURVE('',#93934,#93301,#93942,.T.); +#93942 = LINE('',#93943,#93944); +#93943 = CARTESIAN_POINT('',(0.125,-2.5,0.2)); +#93944 = VECTOR('',#93945,1.); +#93945 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93946 = ORIENTED_EDGE('',*,*,#93308,.T.); +#93947 = ORIENTED_EDGE('',*,*,#90938,.F.); +#93948 = ORIENTED_EDGE('',*,*,#93869,.F.); +#93949 = PLANE('',#93950); +#93950 = AXIS2_PLACEMENT_3D('',#93951,#93952,#93953); +#93951 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#93952 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#93953 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#93954 = ADVANCED_FACE('',(#93955),#93989,.F.); +#93955 = FACE_BOUND('',#93956,.F.); +#93956 = EDGE_LOOP('',(#93957,#93967,#93975,#93981,#93982,#93983)); +#93957 = ORIENTED_EDGE('',*,*,#93958,.F.); +#93958 = EDGE_CURVE('',#93959,#93961,#93963,.T.); +#93959 = VERTEX_POINT('',#93960); +#93960 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93961 = VERTEX_POINT('',#93962); +#93962 = CARTESIAN_POINT('',(1.725,-0.875,0.)); +#93963 = LINE('',#93964,#93965); +#93964 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93965 = VECTOR('',#93966,1.); +#93966 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93967 = ORIENTED_EDGE('',*,*,#93968,.T.); +#93968 = EDGE_CURVE('',#93959,#93969,#93971,.T.); +#93969 = VERTEX_POINT('',#93970); +#93970 = CARTESIAN_POINT('',(2.,-0.875,0.2)); +#93971 = LINE('',#93972,#93973); +#93972 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93973 = VECTOR('',#93974,1.); +#93974 = DIRECTION('',(0.,0.,1.)); +#93975 = ORIENTED_EDGE('',*,*,#93976,.T.); +#93976 = EDGE_CURVE('',#93969,#92710,#93977,.T.); +#93977 = LINE('',#93978,#93979); +#93978 = CARTESIAN_POINT('',(2.,-0.875,0.2)); +#93979 = VECTOR('',#93980,1.); +#93980 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93981 = ORIENTED_EDGE('',*,*,#92717,.T.); +#93982 = ORIENTED_EDGE('',*,*,#91078,.F.); +#93983 = ORIENTED_EDGE('',*,*,#93984,.F.); +#93984 = EDGE_CURVE('',#93961,#91070,#93985,.T.); +#93985 = LINE('',#93986,#93987); +#93986 = CARTESIAN_POINT('',(1.725,-0.875,0.)); +#93987 = VECTOR('',#93988,1.); +#93988 = DIRECTION('',(0.,0.,1.)); +#93989 = PLANE('',#93990); +#93990 = AXIS2_PLACEMENT_3D('',#93991,#93992,#93993); +#93991 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#93992 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#93993 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#93994 = ADVANCED_FACE('',(#93995),#94029,.F.); +#93995 = FACE_BOUND('',#93996,.F.); +#93996 = EDGE_LOOP('',(#93997,#94007,#94013,#94014,#94015,#94023)); +#93997 = ORIENTED_EDGE('',*,*,#93998,.F.); +#93998 = EDGE_CURVE('',#93999,#94001,#94003,.T.); +#93999 = VERTEX_POINT('',#94000); +#94000 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94001 = VERTEX_POINT('',#94002); +#94002 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#94003 = LINE('',#94004,#94005); +#94004 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94005 = VECTOR('',#94006,1.); +#94006 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94007 = ORIENTED_EDGE('',*,*,#94008,.T.); +#94008 = EDGE_CURVE('',#93999,#90955,#94009,.T.); +#94009 = LINE('',#94010,#94011); +#94010 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94011 = VECTOR('',#94012,1.); +#94012 = DIRECTION('',(0.,0.,1.)); +#94013 = ORIENTED_EDGE('',*,*,#90954,.F.); +#94014 = ORIENTED_EDGE('',*,*,#93315,.T.); +#94015 = ORIENTED_EDGE('',*,*,#94016,.T.); +#94016 = EDGE_CURVE('',#93316,#94017,#94019,.T.); +#94017 = VERTEX_POINT('',#94018); +#94018 = CARTESIAN_POINT('',(0.375,-2.5,0.2)); +#94019 = LINE('',#94020,#94021); +#94020 = CARTESIAN_POINT('',(0.375,-2.225,0.2)); +#94021 = VECTOR('',#94022,1.); +#94022 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94023 = ORIENTED_EDGE('',*,*,#94024,.F.); +#94024 = EDGE_CURVE('',#94001,#94017,#94025,.T.); +#94025 = LINE('',#94026,#94027); +#94026 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#94027 = VECTOR('',#94028,1.); +#94028 = DIRECTION('',(0.,0.,1.)); +#94029 = PLANE('',#94030); +#94030 = AXIS2_PLACEMENT_3D('',#94031,#94032,#94033); +#94031 = CARTESIAN_POINT('',(0.375,-2.225,0.)); +#94032 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94033 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94034 = ADVANCED_FACE('',(#94035),#94054,.T.); +#94035 = FACE_BOUND('',#94036,.T.); +#94036 = EDGE_LOOP('',(#94037,#94045,#94046,#94047)); +#94037 = ORIENTED_EDGE('',*,*,#94038,.T.); +#94038 = EDGE_CURVE('',#94039,#91062,#94041,.T.); +#94039 = VERTEX_POINT('',#94040); +#94040 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94041 = LINE('',#94042,#94043); +#94042 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94043 = VECTOR('',#94044,1.); +#94044 = DIRECTION('',(0.,0.,1.)); +#94045 = ORIENTED_EDGE('',*,*,#91069,.T.); +#94046 = ORIENTED_EDGE('',*,*,#93984,.F.); +#94047 = ORIENTED_EDGE('',*,*,#94048,.T.); +#94048 = EDGE_CURVE('',#93961,#94039,#94049,.T.); +#94049 = CIRCLE('',#94050,0.125); +#94050 = AXIS2_PLACEMENT_3D('',#94051,#94052,#94053); +#94051 = CARTESIAN_POINT('',(1.725,-1.,0.)); +#94052 = DIRECTION('',(0.,-0.,1.)); +#94053 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94054 = CYLINDRICAL_SURFACE('',#94055,0.125); +#94055 = AXIS2_PLACEMENT_3D('',#94056,#94057,#94058); +#94056 = CARTESIAN_POINT('',(1.725,-1.,0.)); +#94057 = DIRECTION('',(0.,-0.,-1.)); +#94058 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94059 = ADVANCED_FACE('',(#94060),#94079,.T.); +#94060 = FACE_BOUND('',#94061,.T.); +#94061 = EDGE_LOOP('',(#94062,#94063,#94064,#94072)); +#94062 = ORIENTED_EDGE('',*,*,#94008,.T.); +#94063 = ORIENTED_EDGE('',*,*,#90962,.T.); +#94064 = ORIENTED_EDGE('',*,*,#94065,.F.); +#94065 = EDGE_CURVE('',#94066,#90963,#94068,.T.); +#94066 = VERTEX_POINT('',#94067); +#94067 = CARTESIAN_POINT('',(0.625,-2.225,0.)); +#94068 = LINE('',#94069,#94070); +#94069 = CARTESIAN_POINT('',(0.625,-2.225,0.)); +#94070 = VECTOR('',#94071,1.); +#94071 = DIRECTION('',(0.,0.,1.)); +#94072 = ORIENTED_EDGE('',*,*,#94073,.T.); +#94073 = EDGE_CURVE('',#94066,#93999,#94074,.T.); +#94074 = CIRCLE('',#94075,0.125); +#94075 = AXIS2_PLACEMENT_3D('',#94076,#94077,#94078); +#94076 = CARTESIAN_POINT('',(0.5,-2.225,0.)); +#94077 = DIRECTION('',(-0.,0.,1.)); +#94078 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94079 = CYLINDRICAL_SURFACE('',#94080,0.125); +#94080 = AXIS2_PLACEMENT_3D('',#94081,#94082,#94083); +#94081 = CARTESIAN_POINT('',(0.5,-2.225,0.)); +#94082 = DIRECTION('',(-0.,0.,-1.)); +#94083 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#94084 = ADVANCED_FACE('',(#94085),#94112,.F.); +#94085 = FACE_BOUND('',#94086,.F.); +#94086 = EDGE_LOOP('',(#94087,#94095,#94096,#94097,#94098,#94106)); +#94087 = ORIENTED_EDGE('',*,*,#94088,.F.); +#94088 = EDGE_CURVE('',#94039,#94089,#94091,.T.); +#94089 = VERTEX_POINT('',#94090); +#94090 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#94091 = LINE('',#94092,#94093); +#94092 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94093 = VECTOR('',#94094,1.); +#94094 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94095 = ORIENTED_EDGE('',*,*,#94038,.T.); +#94096 = ORIENTED_EDGE('',*,*,#91061,.F.); +#94097 = ORIENTED_EDGE('',*,*,#92701,.T.); +#94098 = ORIENTED_EDGE('',*,*,#94099,.T.); +#94099 = EDGE_CURVE('',#92702,#94100,#94102,.T.); +#94100 = VERTEX_POINT('',#94101); +#94101 = CARTESIAN_POINT('',(2.,-1.125,0.2)); +#94102 = LINE('',#94103,#94104); +#94103 = CARTESIAN_POINT('',(1.725,-1.125,0.2)); +#94104 = VECTOR('',#94105,1.); +#94105 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94106 = ORIENTED_EDGE('',*,*,#94107,.F.); +#94107 = EDGE_CURVE('',#94089,#94100,#94108,.T.); +#94108 = LINE('',#94109,#94110); +#94109 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#94110 = VECTOR('',#94111,1.); +#94111 = DIRECTION('',(0.,0.,1.)); +#94112 = PLANE('',#94113); +#94113 = AXIS2_PLACEMENT_3D('',#94114,#94115,#94116); +#94114 = CARTESIAN_POINT('',(1.725,-1.125,0.)); +#94115 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94116 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94117 = ADVANCED_FACE('',(#94118),#94145,.F.); +#94118 = FACE_BOUND('',#94119,.F.); +#94119 = EDGE_LOOP('',(#94120,#94128,#94136,#94142,#94143,#94144)); +#94120 = ORIENTED_EDGE('',*,*,#94121,.F.); +#94121 = EDGE_CURVE('',#94122,#94066,#94124,.T.); +#94122 = VERTEX_POINT('',#94123); +#94123 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94124 = LINE('',#94125,#94126); +#94125 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94126 = VECTOR('',#94127,1.); +#94127 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94128 = ORIENTED_EDGE('',*,*,#94129,.T.); +#94129 = EDGE_CURVE('',#94122,#94130,#94132,.T.); +#94130 = VERTEX_POINT('',#94131); +#94131 = CARTESIAN_POINT('',(0.625,-2.5,0.2)); +#94132 = LINE('',#94133,#94134); +#94133 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94134 = VECTOR('',#94135,1.); +#94135 = DIRECTION('',(0.,0.,1.)); +#94136 = ORIENTED_EDGE('',*,*,#94137,.T.); +#94137 = EDGE_CURVE('',#94130,#93324,#94138,.T.); +#94138 = LINE('',#94139,#94140); +#94139 = CARTESIAN_POINT('',(0.625,-2.5,0.2)); +#94140 = VECTOR('',#94141,1.); +#94141 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94142 = ORIENTED_EDGE('',*,*,#93331,.T.); +#94143 = ORIENTED_EDGE('',*,*,#90971,.F.); +#94144 = ORIENTED_EDGE('',*,*,#94065,.F.); +#94145 = PLANE('',#94146); +#94146 = AXIS2_PLACEMENT_3D('',#94147,#94148,#94149); +#94147 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#94148 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#94149 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94150 = ADVANCED_FACE('',(#94151),#94185,.F.); +#94151 = FACE_BOUND('',#94152,.F.); +#94152 = EDGE_LOOP('',(#94153,#94163,#94171,#94177,#94178,#94179)); +#94153 = ORIENTED_EDGE('',*,*,#94154,.F.); +#94154 = EDGE_CURVE('',#94155,#94157,#94159,.T.); +#94155 = VERTEX_POINT('',#94156); +#94156 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94157 = VERTEX_POINT('',#94158); +#94158 = CARTESIAN_POINT('',(1.725,-1.375,0.)); +#94159 = LINE('',#94160,#94161); +#94160 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94161 = VECTOR('',#94162,1.); +#94162 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#94163 = ORIENTED_EDGE('',*,*,#94164,.T.); +#94164 = EDGE_CURVE('',#94155,#94165,#94167,.T.); +#94165 = VERTEX_POINT('',#94166); +#94166 = CARTESIAN_POINT('',(2.,-1.375,0.2)); +#94167 = LINE('',#94168,#94169); +#94168 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94169 = VECTOR('',#94170,1.); +#94170 = DIRECTION('',(0.,0.,1.)); +#94171 = ORIENTED_EDGE('',*,*,#94172,.T.); +#94172 = EDGE_CURVE('',#94165,#92687,#94173,.T.); +#94173 = LINE('',#94174,#94175); +#94174 = CARTESIAN_POINT('',(2.,-1.375,0.2)); +#94175 = VECTOR('',#94176,1.); +#94176 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#94177 = ORIENTED_EDGE('',*,*,#92694,.T.); +#94178 = ORIENTED_EDGE('',*,*,#91045,.F.); +#94179 = ORIENTED_EDGE('',*,*,#94180,.F.); +#94180 = EDGE_CURVE('',#94157,#91037,#94181,.T.); +#94181 = LINE('',#94182,#94183); +#94182 = CARTESIAN_POINT('',(1.725,-1.375,0.)); +#94183 = VECTOR('',#94184,1.); +#94184 = DIRECTION('',(0.,0.,1.)); +#94185 = PLANE('',#94186); +#94186 = AXIS2_PLACEMENT_3D('',#94187,#94188,#94189); +#94187 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#94188 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#94189 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#94190 = ADVANCED_FACE('',(#94191),#94225,.F.); +#94191 = FACE_BOUND('',#94192,.F.); +#94192 = EDGE_LOOP('',(#94193,#94203,#94209,#94210,#94211,#94219)); +#94193 = ORIENTED_EDGE('',*,*,#94194,.F.); +#94194 = EDGE_CURVE('',#94195,#94197,#94199,.T.); +#94195 = VERTEX_POINT('',#94196); +#94196 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94197 = VERTEX_POINT('',#94198); +#94198 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#94199 = LINE('',#94200,#94201); +#94200 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94201 = VECTOR('',#94202,1.); +#94202 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94203 = ORIENTED_EDGE('',*,*,#94204,.T.); +#94204 = EDGE_CURVE('',#94195,#90988,#94205,.T.); +#94205 = LINE('',#94206,#94207); +#94206 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94207 = VECTOR('',#94208,1.); +#94208 = DIRECTION('',(0.,0.,1.)); +#94209 = ORIENTED_EDGE('',*,*,#90987,.F.); +#94210 = ORIENTED_EDGE('',*,*,#93338,.T.); +#94211 = ORIENTED_EDGE('',*,*,#94212,.T.); +#94212 = EDGE_CURVE('',#93339,#94213,#94215,.T.); +#94213 = VERTEX_POINT('',#94214); +#94214 = CARTESIAN_POINT('',(0.875,-2.5,0.2)); +#94215 = LINE('',#94216,#94217); +#94216 = CARTESIAN_POINT('',(0.875,-2.225,0.2)); +#94217 = VECTOR('',#94218,1.); +#94218 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94219 = ORIENTED_EDGE('',*,*,#94220,.F.); +#94220 = EDGE_CURVE('',#94197,#94213,#94221,.T.); +#94221 = LINE('',#94222,#94223); +#94222 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#94223 = VECTOR('',#94224,1.); +#94224 = DIRECTION('',(0.,0.,1.)); +#94225 = PLANE('',#94226); +#94226 = AXIS2_PLACEMENT_3D('',#94227,#94228,#94229); +#94227 = CARTESIAN_POINT('',(0.875,-2.225,0.)); +#94228 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94229 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#94230 = ADVANCED_FACE('',(#94231),#94250,.T.); +#94231 = FACE_BOUND('',#94232,.T.); +#94232 = EDGE_LOOP('',(#94233,#94241,#94242,#94243)); +#94233 = ORIENTED_EDGE('',*,*,#94234,.T.); +#94234 = EDGE_CURVE('',#94235,#91029,#94237,.T.); +#94235 = VERTEX_POINT('',#94236); +#94236 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94237 = LINE('',#94238,#94239); +#94238 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94239 = VECTOR('',#94240,1.); +#94240 = DIRECTION('',(0.,0.,1.)); +#94241 = ORIENTED_EDGE('',*,*,#91036,.T.); +#94242 = ORIENTED_EDGE('',*,*,#94180,.F.); +#94243 = ORIENTED_EDGE('',*,*,#94244,.T.); +#94244 = EDGE_CURVE('',#94157,#94235,#94245,.T.); +#94245 = CIRCLE('',#94246,0.125); +#94246 = AXIS2_PLACEMENT_3D('',#94247,#94248,#94249); +#94247 = CARTESIAN_POINT('',(1.725,-1.5,0.)); +#94248 = DIRECTION('',(0.,-0.,1.)); +#94249 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94250 = CYLINDRICAL_SURFACE('',#94251,0.125); +#94251 = AXIS2_PLACEMENT_3D('',#94252,#94253,#94254); +#94252 = CARTESIAN_POINT('',(1.725,-1.5,0.)); +#94253 = DIRECTION('',(0.,-0.,-1.)); +#94254 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94255 = ADVANCED_FACE('',(#94256),#94275,.T.); +#94256 = FACE_BOUND('',#94257,.T.); +#94257 = EDGE_LOOP('',(#94258,#94259,#94260,#94268)); +#94258 = ORIENTED_EDGE('',*,*,#94204,.T.); +#94259 = ORIENTED_EDGE('',*,*,#90995,.T.); +#94260 = ORIENTED_EDGE('',*,*,#94261,.F.); +#94261 = EDGE_CURVE('',#94262,#90996,#94264,.T.); +#94262 = VERTEX_POINT('',#94263); +#94263 = CARTESIAN_POINT('',(1.125,-2.225,0.)); +#94264 = LINE('',#94265,#94266); +#94265 = CARTESIAN_POINT('',(1.125,-2.225,0.)); +#94266 = VECTOR('',#94267,1.); +#94267 = DIRECTION('',(0.,0.,1.)); +#94268 = ORIENTED_EDGE('',*,*,#94269,.T.); +#94269 = EDGE_CURVE('',#94262,#94195,#94270,.T.); +#94270 = CIRCLE('',#94271,0.125); +#94271 = AXIS2_PLACEMENT_3D('',#94272,#94273,#94274); +#94272 = CARTESIAN_POINT('',(1.,-2.225,0.)); +#94273 = DIRECTION('',(-0.,0.,1.)); +#94274 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#94275 = CYLINDRICAL_SURFACE('',#94276,0.125); +#94276 = AXIS2_PLACEMENT_3D('',#94277,#94278,#94279); +#94277 = CARTESIAN_POINT('',(1.,-2.225,0.)); +#94278 = DIRECTION('',(-0.,0.,-1.)); +#94279 = DIRECTION('',(1.,-5.665538897648E-16,-0.)); +#94280 = ADVANCED_FACE('',(#94281),#94308,.F.); +#94281 = FACE_BOUND('',#94282,.F.); +#94282 = EDGE_LOOP('',(#94283,#94291,#94292,#94293,#94294,#94302)); +#94283 = ORIENTED_EDGE('',*,*,#94284,.F.); +#94284 = EDGE_CURVE('',#94235,#94285,#94287,.T.); +#94285 = VERTEX_POINT('',#94286); +#94286 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#94287 = LINE('',#94288,#94289); +#94288 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94289 = VECTOR('',#94290,1.); +#94290 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94291 = ORIENTED_EDGE('',*,*,#94234,.T.); +#94292 = ORIENTED_EDGE('',*,*,#91028,.F.); +#94293 = ORIENTED_EDGE('',*,*,#92678,.T.); +#94294 = ORIENTED_EDGE('',*,*,#94295,.T.); +#94295 = EDGE_CURVE('',#92679,#94296,#94298,.T.); +#94296 = VERTEX_POINT('',#94297); +#94297 = CARTESIAN_POINT('',(2.,-1.625,0.2)); +#94298 = LINE('',#94299,#94300); +#94299 = CARTESIAN_POINT('',(1.725,-1.625,0.2)); +#94300 = VECTOR('',#94301,1.); +#94301 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94302 = ORIENTED_EDGE('',*,*,#94303,.F.); +#94303 = EDGE_CURVE('',#94285,#94296,#94304,.T.); +#94304 = LINE('',#94305,#94306); +#94305 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#94306 = VECTOR('',#94307,1.); +#94307 = DIRECTION('',(0.,0.,1.)); +#94308 = PLANE('',#94309); +#94309 = AXIS2_PLACEMENT_3D('',#94310,#94311,#94312); +#94310 = CARTESIAN_POINT('',(1.725,-1.625,0.)); +#94311 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94312 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#94313 = ADVANCED_FACE('',(#94314),#94341,.F.); +#94314 = FACE_BOUND('',#94315,.F.); +#94315 = EDGE_LOOP('',(#94316,#94324,#94332,#94338,#94339,#94340)); +#94316 = ORIENTED_EDGE('',*,*,#94317,.F.); +#94317 = EDGE_CURVE('',#94318,#94262,#94320,.T.); +#94318 = VERTEX_POINT('',#94319); +#94319 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94320 = LINE('',#94321,#94322); +#94321 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94322 = VECTOR('',#94323,1.); +#94323 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94324 = ORIENTED_EDGE('',*,*,#94325,.T.); +#94325 = EDGE_CURVE('',#94318,#94326,#94328,.T.); +#94326 = VERTEX_POINT('',#94327); +#94327 = CARTESIAN_POINT('',(1.125,-2.5,0.2)); +#94328 = LINE('',#94329,#94330); +#94329 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94330 = VECTOR('',#94331,1.); +#94331 = DIRECTION('',(0.,0.,1.)); +#94332 = ORIENTED_EDGE('',*,*,#94333,.T.); +#94333 = EDGE_CURVE('',#94326,#93347,#94334,.T.); +#94334 = LINE('',#94335,#94336); +#94335 = CARTESIAN_POINT('',(1.125,-2.5,0.2)); +#94336 = VECTOR('',#94337,1.); +#94337 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94338 = ORIENTED_EDGE('',*,*,#93354,.T.); +#94339 = ORIENTED_EDGE('',*,*,#91004,.F.); +#94340 = ORIENTED_EDGE('',*,*,#94261,.F.); +#94341 = PLANE('',#94342); +#94342 = AXIS2_PLACEMENT_3D('',#94343,#94344,#94345); +#94343 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#94344 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#94345 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#94346 = ADVANCED_FACE('',(#94347),#94372,.F.); +#94347 = FACE_BOUND('',#94348,.F.); +#94348 = EDGE_LOOP('',(#94349,#94357,#94358,#94366)); +#94349 = ORIENTED_EDGE('',*,*,#94350,.T.); +#94350 = EDGE_CURVE('',#94351,#91403,#94353,.T.); +#94351 = VERTEX_POINT('',#94352); +#94352 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94353 = LINE('',#94354,#94355); +#94354 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94355 = VECTOR('',#94356,1.); +#94356 = DIRECTION('',(0.,0.,1.)); +#94357 = ORIENTED_EDGE('',*,*,#91402,.T.); +#94358 = ORIENTED_EDGE('',*,*,#94359,.F.); +#94359 = EDGE_CURVE('',#94360,#91405,#94362,.T.); +#94360 = VERTEX_POINT('',#94361); +#94361 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94362 = LINE('',#94363,#94364); +#94363 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94364 = VECTOR('',#94365,1.); +#94365 = DIRECTION('',(0.,0.,1.)); +#94366 = ORIENTED_EDGE('',*,*,#94367,.F.); +#94367 = EDGE_CURVE('',#94351,#94360,#94368,.T.); +#94368 = LINE('',#94369,#94370); +#94369 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94370 = VECTOR('',#94371,1.); +#94371 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94372 = PLANE('',#94373); +#94373 = AXIS2_PLACEMENT_3D('',#94374,#94375,#94376); +#94374 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#94375 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#94376 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94377 = ADVANCED_FACE('',(#94378),#94396,.F.); +#94378 = FACE_BOUND('',#94379,.F.); +#94379 = EDGE_LOOP('',(#94380,#94381,#94382,#94390)); +#94380 = ORIENTED_EDGE('',*,*,#94359,.T.); +#94381 = ORIENTED_EDGE('',*,*,#91436,.T.); +#94382 = ORIENTED_EDGE('',*,*,#94383,.F.); +#94383 = EDGE_CURVE('',#94384,#91429,#94386,.T.); +#94384 = VERTEX_POINT('',#94385); +#94385 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94386 = LINE('',#94387,#94388); +#94387 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94388 = VECTOR('',#94389,1.); +#94389 = DIRECTION('',(0.,0.,1.)); +#94390 = ORIENTED_EDGE('',*,*,#94391,.F.); +#94391 = EDGE_CURVE('',#94360,#94384,#94392,.T.); +#94392 = LINE('',#94393,#94394); +#94393 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94394 = VECTOR('',#94395,1.); +#94395 = DIRECTION('',(1.,-1.382541879722E-16,0.)); +#94396 = PLANE('',#94397); +#94397 = AXIS2_PLACEMENT_3D('',#94398,#94399,#94400); +#94398 = CARTESIAN_POINT('',(-1.325,-1.825,0.)); +#94399 = DIRECTION('',(1.382541879722E-16,1.,0.)); +#94400 = DIRECTION('',(1.,-1.382541879722E-16,0.)); +#94401 = ADVANCED_FACE('',(#94402),#94420,.F.); +#94402 = FACE_BOUND('',#94403,.F.); +#94403 = EDGE_LOOP('',(#94404,#94405,#94406,#94414)); +#94404 = ORIENTED_EDGE('',*,*,#94383,.T.); +#94405 = ORIENTED_EDGE('',*,*,#91428,.T.); +#94406 = ORIENTED_EDGE('',*,*,#94407,.F.); +#94407 = EDGE_CURVE('',#94408,#91421,#94410,.T.); +#94408 = VERTEX_POINT('',#94409); +#94409 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94410 = LINE('',#94411,#94412); +#94411 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94412 = VECTOR('',#94413,1.); +#94413 = DIRECTION('',(0.,0.,1.)); +#94414 = ORIENTED_EDGE('',*,*,#94415,.F.); +#94415 = EDGE_CURVE('',#94384,#94408,#94416,.T.); +#94416 = LINE('',#94417,#94418); +#94417 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94418 = VECTOR('',#94419,1.); +#94419 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#94420 = PLANE('',#94421); +#94421 = AXIS2_PLACEMENT_3D('',#94422,#94423,#94424); +#94422 = CARTESIAN_POINT('',(1.325,-1.825,0.)); +#94423 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#94424 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#94425 = ADVANCED_FACE('',(#94426),#94444,.F.); +#94426 = FACE_BOUND('',#94427,.F.); +#94427 = EDGE_LOOP('',(#94428,#94429,#94430,#94438)); +#94428 = ORIENTED_EDGE('',*,*,#94407,.T.); +#94429 = ORIENTED_EDGE('',*,*,#91420,.T.); +#94430 = ORIENTED_EDGE('',*,*,#94431,.F.); +#94431 = EDGE_CURVE('',#94432,#91413,#94434,.T.); +#94432 = VERTEX_POINT('',#94433); +#94433 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94434 = LINE('',#94435,#94436); +#94435 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94436 = VECTOR('',#94437,1.); +#94437 = DIRECTION('',(0.,0.,1.)); +#94438 = ORIENTED_EDGE('',*,*,#94439,.F.); +#94439 = EDGE_CURVE('',#94408,#94432,#94440,.T.); +#94440 = LINE('',#94441,#94442); +#94441 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94442 = VECTOR('',#94443,1.); +#94443 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#94444 = PLANE('',#94445); +#94445 = AXIS2_PLACEMENT_3D('',#94446,#94447,#94448); +#94446 = CARTESIAN_POINT('',(1.325,1.825,0.)); +#94447 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94448 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#94449 = ADVANCED_FACE('',(#94450),#94461,.F.); +#94450 = FACE_BOUND('',#94451,.F.); +#94451 = EDGE_LOOP('',(#94452,#94453,#94454,#94455)); +#94452 = ORIENTED_EDGE('',*,*,#94431,.T.); +#94453 = ORIENTED_EDGE('',*,*,#91412,.T.); +#94454 = ORIENTED_EDGE('',*,*,#94350,.F.); +#94455 = ORIENTED_EDGE('',*,*,#94456,.F.); +#94456 = EDGE_CURVE('',#94432,#94351,#94457,.T.); +#94457 = LINE('',#94458,#94459); +#94458 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94459 = VECTOR('',#94460,1.); +#94460 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#94461 = PLANE('',#94462); +#94462 = AXIS2_PLACEMENT_3D('',#94463,#94464,#94465); +#94463 = CARTESIAN_POINT('',(-1.125,1.825,0.)); +#94464 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#94465 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#94466 = ADVANCED_FACE('',(#94467,#94473),#94484,.T.); +#94467 = FACE_BOUND('',#94468,.T.); +#94468 = EDGE_LOOP('',(#94469,#94470,#94471,#94472)); +#94469 = ORIENTED_EDGE('',*,*,#91450,.F.); +#94470 = ORIENTED_EDGE('',*,*,#91596,.T.); +#94471 = ORIENTED_EDGE('',*,*,#93238,.T.); +#94472 = ORIENTED_EDGE('',*,*,#92663,.F.); +#94473 = FACE_BOUND('',#94474,.T.); +#94474 = EDGE_LOOP('',(#94475)); +#94475 = ORIENTED_EDGE('',*,*,#94476,.T.); +#94476 = EDGE_CURVE('',#94477,#94477,#94479,.T.); +#94477 = VERTEX_POINT('',#94478); +#94478 = CARTESIAN_POINT('',(-1.4,1.65,0.77)); +#94479 = CIRCLE('',#94480,0.25); +#94480 = AXIS2_PLACEMENT_3D('',#94481,#94482,#94483); +#94481 = CARTESIAN_POINT('',(-1.4,1.9,0.77)); +#94482 = DIRECTION('',(-0.,0.,-1.)); +#94483 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94484 = PLANE('',#94485); +#94485 = AXIS2_PLACEMENT_3D('',#94486,#94487,#94488); +#94486 = CARTESIAN_POINT('',(-1.99,2.49,0.77)); +#94487 = DIRECTION('',(0.,0.,1.)); +#94488 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#94489 = ADVANCED_FACE('',(#94490),#94501,.F.); +#94490 = FACE_BOUND('',#94491,.F.); +#94491 = EDGE_LOOP('',(#94492,#94493,#94499,#94500)); +#94492 = ORIENTED_EDGE('',*,*,#92483,.F.); +#94493 = ORIENTED_EDGE('',*,*,#94494,.F.); +#94494 = EDGE_CURVE('',#92607,#92476,#94495,.T.); +#94495 = LINE('',#94496,#94497); +#94496 = CARTESIAN_POINT('',(1.125,2.5,0.2)); +#94497 = VECTOR('',#94498,1.); +#94498 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94499 = ORIENTED_EDGE('',*,*,#92606,.F.); +#94500 = ORIENTED_EDGE('',*,*,#91553,.F.); +#94501 = PLANE('',#94502); +#94502 = AXIS2_PLACEMENT_3D('',#94503,#94504,#94505); +#94503 = CARTESIAN_POINT('',(0.875,2.5,0.2)); +#94504 = DIRECTION('',(-0.,0.,-1.)); +#94505 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94506 = ADVANCED_FACE('',(#94507),#94518,.F.); +#94507 = FACE_BOUND('',#94508,.F.); +#94508 = EDGE_LOOP('',(#94509,#94510,#94516,#94517)); +#94509 = ORIENTED_EDGE('',*,*,#92287,.F.); +#94510 = ORIENTED_EDGE('',*,*,#94511,.F.); +#94511 = EDGE_CURVE('',#92411,#92280,#94512,.T.); +#94512 = LINE('',#94513,#94514); +#94513 = CARTESIAN_POINT('',(0.625,2.5,0.2)); +#94514 = VECTOR('',#94515,1.); +#94515 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94516 = ORIENTED_EDGE('',*,*,#92410,.F.); +#94517 = ORIENTED_EDGE('',*,*,#91530,.F.); +#94518 = PLANE('',#94519); +#94519 = AXIS2_PLACEMENT_3D('',#94520,#94521,#94522); +#94520 = CARTESIAN_POINT('',(0.375,2.5,0.2)); +#94521 = DIRECTION('',(-0.,0.,-1.)); +#94522 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94523 = ADVANCED_FACE('',(#94524),#94535,.F.); +#94524 = FACE_BOUND('',#94525,.F.); +#94525 = EDGE_LOOP('',(#94526,#94527,#94533,#94534)); +#94526 = ORIENTED_EDGE('',*,*,#91895,.F.); +#94527 = ORIENTED_EDGE('',*,*,#94528,.F.); +#94528 = EDGE_CURVE('',#92019,#91888,#94529,.T.); +#94529 = LINE('',#94530,#94531); +#94530 = CARTESIAN_POINT('',(-0.375,2.5,0.2)); +#94531 = VECTOR('',#94532,1.); +#94532 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94533 = ORIENTED_EDGE('',*,*,#92018,.F.); +#94534 = ORIENTED_EDGE('',*,*,#91484,.F.); +#94535 = PLANE('',#94536); +#94536 = AXIS2_PLACEMENT_3D('',#94537,#94538,#94539); +#94537 = CARTESIAN_POINT('',(-0.625,2.5,0.2)); +#94538 = DIRECTION('',(-0.,0.,-1.)); +#94539 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94540 = ADVANCED_FACE('',(#94541),#94552,.F.); +#94541 = FACE_BOUND('',#94542,.F.); +#94542 = EDGE_LOOP('',(#94543,#94544,#94550,#94551)); +#94543 = ORIENTED_EDGE('',*,*,#92091,.F.); +#94544 = ORIENTED_EDGE('',*,*,#94545,.F.); +#94545 = EDGE_CURVE('',#92215,#92084,#94546,.T.); +#94546 = LINE('',#94547,#94548); +#94547 = CARTESIAN_POINT('',(0.125,2.5,0.2)); +#94548 = VECTOR('',#94549,1.); +#94549 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94550 = ORIENTED_EDGE('',*,*,#92214,.F.); +#94551 = ORIENTED_EDGE('',*,*,#91507,.F.); +#94552 = PLANE('',#94553); +#94553 = AXIS2_PLACEMENT_3D('',#94554,#94555,#94556); +#94554 = CARTESIAN_POINT('',(-0.125,2.5,0.2)); +#94555 = DIRECTION('',(-0.,0.,-1.)); +#94556 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94557 = ADVANCED_FACE('',(#94558),#94569,.F.); +#94558 = FACE_BOUND('',#94559,.F.); +#94559 = EDGE_LOOP('',(#94560,#94561,#94567,#94568)); +#94560 = ORIENTED_EDGE('',*,*,#91860,.F.); +#94561 = ORIENTED_EDGE('',*,*,#94562,.F.); +#94562 = EDGE_CURVE('',#91798,#91853,#94563,.T.); +#94563 = LINE('',#94564,#94565); +#94564 = CARTESIAN_POINT('',(-2.,1.625,0.2)); +#94565 = VECTOR('',#94566,1.); +#94566 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94567 = ORIENTED_EDGE('',*,*,#91797,.F.); +#94568 = ORIENTED_EDGE('',*,*,#91757,.F.); +#94569 = PLANE('',#94570); +#94570 = AXIS2_PLACEMENT_3D('',#94571,#94572,#94573); +#94571 = CARTESIAN_POINT('',(-2.,1.375,0.2)); +#94572 = DIRECTION('',(0.,-0.,-1.)); +#94573 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94574 = ADVANCED_FACE('',(#94575),#94586,.F.); +#94575 = FACE_BOUND('',#94576,.F.); +#94576 = EDGE_LOOP('',(#94577,#94578,#94584,#94585)); +#94577 = ORIENTED_EDGE('',*,*,#93188,.F.); +#94578 = ORIENTED_EDGE('',*,*,#94579,.F.); +#94579 = EDGE_CURVE('',#93061,#93181,#94580,.T.); +#94580 = LINE('',#94581,#94582); +#94581 = CARTESIAN_POINT('',(-2.,-1.375,0.2)); +#94582 = VECTOR('',#94583,1.); +#94583 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94584 = ORIENTED_EDGE('',*,*,#93060,.F.); +#94585 = ORIENTED_EDGE('',*,*,#91619,.F.); +#94586 = PLANE('',#94587); +#94587 = AXIS2_PLACEMENT_3D('',#94588,#94589,#94590); +#94588 = CARTESIAN_POINT('',(-2.,-1.625,0.2)); +#94589 = DIRECTION('',(0.,-0.,-1.)); +#94590 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94591 = ADVANCED_FACE('',(#94592),#94603,.F.); +#94592 = FACE_BOUND('',#94593,.F.); +#94593 = EDGE_LOOP('',(#94594,#94595,#94601,#94602)); +#94594 = ORIENTED_EDGE('',*,*,#92056,.F.); +#94595 = ORIENTED_EDGE('',*,*,#94596,.F.); +#94596 = EDGE_CURVE('',#91936,#92049,#94597,.T.); +#94597 = LINE('',#94598,#94599); +#94598 = CARTESIAN_POINT('',(-2.,1.125,0.2)); +#94599 = VECTOR('',#94600,1.); +#94600 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94601 = ORIENTED_EDGE('',*,*,#91935,.F.); +#94602 = ORIENTED_EDGE('',*,*,#91734,.F.); +#94603 = PLANE('',#94604); +#94604 = AXIS2_PLACEMENT_3D('',#94605,#94606,#94607); +#94605 = CARTESIAN_POINT('',(-2.,0.875,0.2)); +#94606 = DIRECTION('',(0.,-0.,-1.)); +#94607 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94608 = ADVANCED_FACE('',(#94609),#94620,.F.); +#94609 = FACE_BOUND('',#94610,.F.); +#94610 = EDGE_LOOP('',(#94611,#94612,#94618,#94619)); +#94611 = ORIENTED_EDGE('',*,*,#92992,.F.); +#94612 = ORIENTED_EDGE('',*,*,#94613,.F.); +#94613 = EDGE_CURVE('',#92865,#92985,#94614,.T.); +#94614 = LINE('',#94615,#94616); +#94615 = CARTESIAN_POINT('',(-2.,-0.875,0.2)); +#94616 = VECTOR('',#94617,1.); +#94617 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94618 = ORIENTED_EDGE('',*,*,#92864,.F.); +#94619 = ORIENTED_EDGE('',*,*,#91642,.F.); +#94620 = PLANE('',#94621); +#94621 = AXIS2_PLACEMENT_3D('',#94622,#94623,#94624); +#94622 = CARTESIAN_POINT('',(-2.,-1.125,0.2)); +#94623 = DIRECTION('',(0.,-0.,-1.)); +#94624 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94625 = ADVANCED_FACE('',(#94626),#94637,.F.); +#94626 = FACE_BOUND('',#94627,.F.); +#94627 = EDGE_LOOP('',(#94628,#94629,#94635,#94636)); +#94628 = ORIENTED_EDGE('',*,*,#92252,.F.); +#94629 = ORIENTED_EDGE('',*,*,#94630,.F.); +#94630 = EDGE_CURVE('',#92132,#92245,#94631,.T.); +#94631 = LINE('',#94632,#94633); +#94632 = CARTESIAN_POINT('',(-2.,0.625,0.2)); +#94633 = VECTOR('',#94634,1.); +#94634 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94635 = ORIENTED_EDGE('',*,*,#92131,.F.); +#94636 = ORIENTED_EDGE('',*,*,#91711,.F.); +#94637 = PLANE('',#94638); +#94638 = AXIS2_PLACEMENT_3D('',#94639,#94640,#94641); +#94639 = CARTESIAN_POINT('',(-2.,0.375,0.2)); +#94640 = DIRECTION('',(0.,-0.,-1.)); +#94641 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94642 = ADVANCED_FACE('',(#94643),#94654,.F.); +#94643 = FACE_BOUND('',#94644,.F.); +#94644 = EDGE_LOOP('',(#94645,#94646,#94652,#94653)); +#94645 = ORIENTED_EDGE('',*,*,#92644,.F.); +#94646 = ORIENTED_EDGE('',*,*,#94647,.F.); +#94647 = EDGE_CURVE('',#92524,#92637,#94648,.T.); +#94648 = LINE('',#94649,#94650); +#94649 = CARTESIAN_POINT('',(-2.,-0.375,0.2)); +#94650 = VECTOR('',#94651,1.); +#94651 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94652 = ORIENTED_EDGE('',*,*,#92523,.F.); +#94653 = ORIENTED_EDGE('',*,*,#91665,.F.); +#94654 = PLANE('',#94655); +#94655 = AXIS2_PLACEMENT_3D('',#94656,#94657,#94658); +#94656 = CARTESIAN_POINT('',(-2.,-0.625,0.2)); +#94657 = DIRECTION('',(0.,-0.,-1.)); +#94658 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94659 = ADVANCED_FACE('',(#94660),#94671,.F.); +#94660 = FACE_BOUND('',#94661,.F.); +#94661 = EDGE_LOOP('',(#94662,#94663,#94669,#94670)); +#94662 = ORIENTED_EDGE('',*,*,#92448,.F.); +#94663 = ORIENTED_EDGE('',*,*,#94664,.F.); +#94664 = EDGE_CURVE('',#92328,#92441,#94665,.T.); +#94665 = LINE('',#94666,#94667); +#94666 = CARTESIAN_POINT('',(-2.,0.125,0.2)); +#94667 = VECTOR('',#94668,1.); +#94668 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94669 = ORIENTED_EDGE('',*,*,#92327,.F.); +#94670 = ORIENTED_EDGE('',*,*,#91688,.F.); +#94671 = PLANE('',#94672); +#94672 = AXIS2_PLACEMENT_3D('',#94673,#94674,#94675); +#94673 = CARTESIAN_POINT('',(-2.,-0.125,0.2)); +#94674 = DIRECTION('',(0.,-0.,-1.)); +#94675 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94676 = ADVANCED_FACE('',(#94677),#94688,.T.); +#94677 = FACE_BOUND('',#94678,.F.); +#94678 = EDGE_LOOP('',(#94679,#94680,#94681,#94682)); +#94679 = ORIENTED_EDGE('',*,*,#91844,.T.); +#94680 = ORIENTED_EDGE('',*,*,#91829,.T.); +#94681 = ORIENTED_EDGE('',*,*,#91779,.T.); +#94682 = ORIENTED_EDGE('',*,*,#94683,.T.); +#94683 = EDGE_CURVE('',#91782,#91845,#94684,.T.); +#94684 = LINE('',#94685,#94686); +#94685 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#94686 = VECTOR('',#94687,1.); +#94687 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94688 = PLANE('',#94689); +#94689 = AXIS2_PLACEMENT_3D('',#94690,#94691,#94692); +#94690 = CARTESIAN_POINT('',(-2.,1.375,0.)); +#94691 = DIRECTION('',(0.,-0.,-1.)); +#94692 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94693 = ADVANCED_FACE('',(#94694),#94700,.F.); +#94694 = FACE_BOUND('',#94695,.F.); +#94695 = EDGE_LOOP('',(#94696,#94697,#94698,#94699)); +#94696 = ORIENTED_EDGE('',*,*,#91805,.T.); +#94697 = ORIENTED_EDGE('',*,*,#94562,.T.); +#94698 = ORIENTED_EDGE('',*,*,#91852,.F.); +#94699 = ORIENTED_EDGE('',*,*,#94683,.F.); +#94700 = PLANE('',#94701); +#94701 = AXIS2_PLACEMENT_3D('',#94702,#94703,#94704); +#94702 = CARTESIAN_POINT('',(-2.,1.625,0.)); +#94703 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94704 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94705 = ADVANCED_FACE('',(#94706),#94717,.T.); +#94706 = FACE_BOUND('',#94707,.F.); +#94707 = EDGE_LOOP('',(#94708,#94709,#94710,#94711)); +#94708 = ORIENTED_EDGE('',*,*,#91877,.T.); +#94709 = ORIENTED_EDGE('',*,*,#91967,.T.); +#94710 = ORIENTED_EDGE('',*,*,#92007,.T.); +#94711 = ORIENTED_EDGE('',*,*,#94712,.T.); +#94712 = EDGE_CURVE('',#92008,#91878,#94713,.T.); +#94713 = LINE('',#94714,#94715); +#94714 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#94715 = VECTOR('',#94716,1.); +#94716 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94717 = PLANE('',#94718); +#94718 = AXIS2_PLACEMENT_3D('',#94719,#94720,#94721); +#94719 = CARTESIAN_POINT('',(-0.625,2.5,0.)); +#94720 = DIRECTION('',(-0.,0.,-1.)); +#94721 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94722 = ADVANCED_FACE('',(#94723),#94729,.F.); +#94723 = FACE_BOUND('',#94724,.F.); +#94724 = EDGE_LOOP('',(#94725,#94726,#94727,#94728)); +#94725 = ORIENTED_EDGE('',*,*,#92026,.T.); +#94726 = ORIENTED_EDGE('',*,*,#94528,.T.); +#94727 = ORIENTED_EDGE('',*,*,#91887,.F.); +#94728 = ORIENTED_EDGE('',*,*,#94712,.F.); +#94729 = PLANE('',#94730); +#94730 = AXIS2_PLACEMENT_3D('',#94731,#94732,#94733); +#94731 = CARTESIAN_POINT('',(-0.375,2.5,0.)); +#94732 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94733 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94734 = ADVANCED_FACE('',(#94735),#94746,.T.); +#94735 = FACE_BOUND('',#94736,.F.); +#94736 = EDGE_LOOP('',(#94737,#94738,#94739,#94740)); +#94737 = ORIENTED_EDGE('',*,*,#92040,.T.); +#94738 = ORIENTED_EDGE('',*,*,#91992,.T.); +#94739 = ORIENTED_EDGE('',*,*,#91917,.T.); +#94740 = ORIENTED_EDGE('',*,*,#94741,.T.); +#94741 = EDGE_CURVE('',#91920,#92041,#94742,.T.); +#94742 = LINE('',#94743,#94744); +#94743 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#94744 = VECTOR('',#94745,1.); +#94745 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94746 = PLANE('',#94747); +#94747 = AXIS2_PLACEMENT_3D('',#94748,#94749,#94750); +#94748 = CARTESIAN_POINT('',(-2.,0.875,0.)); +#94749 = DIRECTION('',(0.,-0.,-1.)); +#94750 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94751 = ADVANCED_FACE('',(#94752),#94758,.F.); +#94752 = FACE_BOUND('',#94753,.F.); +#94753 = EDGE_LOOP('',(#94754,#94755,#94756,#94757)); +#94754 = ORIENTED_EDGE('',*,*,#91943,.T.); +#94755 = ORIENTED_EDGE('',*,*,#94596,.T.); +#94756 = ORIENTED_EDGE('',*,*,#92048,.F.); +#94757 = ORIENTED_EDGE('',*,*,#94741,.F.); +#94758 = PLANE('',#94759); +#94759 = AXIS2_PLACEMENT_3D('',#94760,#94761,#94762); +#94760 = CARTESIAN_POINT('',(-2.,1.125,0.)); +#94761 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94762 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94763 = ADVANCED_FACE('',(#94764),#94775,.T.); +#94764 = FACE_BOUND('',#94765,.F.); +#94765 = EDGE_LOOP('',(#94766,#94767,#94768,#94769)); +#94766 = ORIENTED_EDGE('',*,*,#92073,.T.); +#94767 = ORIENTED_EDGE('',*,*,#92163,.T.); +#94768 = ORIENTED_EDGE('',*,*,#92203,.T.); +#94769 = ORIENTED_EDGE('',*,*,#94770,.T.); +#94770 = EDGE_CURVE('',#92204,#92074,#94771,.T.); +#94771 = LINE('',#94772,#94773); +#94772 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#94773 = VECTOR('',#94774,1.); +#94774 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94775 = PLANE('',#94776); +#94776 = AXIS2_PLACEMENT_3D('',#94777,#94778,#94779); +#94777 = CARTESIAN_POINT('',(-0.125,2.5,0.)); +#94778 = DIRECTION('',(-0.,0.,-1.)); +#94779 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94780 = ADVANCED_FACE('',(#94781),#94787,.F.); +#94781 = FACE_BOUND('',#94782,.F.); +#94782 = EDGE_LOOP('',(#94783,#94784,#94785,#94786)); +#94783 = ORIENTED_EDGE('',*,*,#92222,.T.); +#94784 = ORIENTED_EDGE('',*,*,#94545,.T.); +#94785 = ORIENTED_EDGE('',*,*,#92083,.F.); +#94786 = ORIENTED_EDGE('',*,*,#94770,.F.); +#94787 = PLANE('',#94788); +#94788 = AXIS2_PLACEMENT_3D('',#94789,#94790,#94791); +#94789 = CARTESIAN_POINT('',(0.125,2.5,0.)); +#94790 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94791 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94792 = ADVANCED_FACE('',(#94793),#94804,.T.); +#94793 = FACE_BOUND('',#94794,.F.); +#94794 = EDGE_LOOP('',(#94795,#94796,#94797,#94798)); +#94795 = ORIENTED_EDGE('',*,*,#92236,.T.); +#94796 = ORIENTED_EDGE('',*,*,#92188,.T.); +#94797 = ORIENTED_EDGE('',*,*,#92113,.T.); +#94798 = ORIENTED_EDGE('',*,*,#94799,.T.); +#94799 = EDGE_CURVE('',#92116,#92237,#94800,.T.); +#94800 = LINE('',#94801,#94802); +#94801 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#94802 = VECTOR('',#94803,1.); +#94803 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94804 = PLANE('',#94805); +#94805 = AXIS2_PLACEMENT_3D('',#94806,#94807,#94808); +#94806 = CARTESIAN_POINT('',(-2.,0.375,0.)); +#94807 = DIRECTION('',(0.,-0.,-1.)); +#94808 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94809 = ADVANCED_FACE('',(#94810),#94816,.F.); +#94810 = FACE_BOUND('',#94811,.F.); +#94811 = EDGE_LOOP('',(#94812,#94813,#94814,#94815)); +#94812 = ORIENTED_EDGE('',*,*,#92139,.T.); +#94813 = ORIENTED_EDGE('',*,*,#94630,.T.); +#94814 = ORIENTED_EDGE('',*,*,#92244,.F.); +#94815 = ORIENTED_EDGE('',*,*,#94799,.F.); +#94816 = PLANE('',#94817); +#94817 = AXIS2_PLACEMENT_3D('',#94818,#94819,#94820); +#94818 = CARTESIAN_POINT('',(-2.,0.625,0.)); +#94819 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94820 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94821 = ADVANCED_FACE('',(#94822),#94833,.T.); +#94822 = FACE_BOUND('',#94823,.F.); +#94823 = EDGE_LOOP('',(#94824,#94825,#94826,#94827)); +#94824 = ORIENTED_EDGE('',*,*,#92269,.T.); +#94825 = ORIENTED_EDGE('',*,*,#92359,.T.); +#94826 = ORIENTED_EDGE('',*,*,#92399,.T.); +#94827 = ORIENTED_EDGE('',*,*,#94828,.T.); +#94828 = EDGE_CURVE('',#92400,#92270,#94829,.T.); +#94829 = LINE('',#94830,#94831); +#94830 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#94831 = VECTOR('',#94832,1.); +#94832 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94833 = PLANE('',#94834); +#94834 = AXIS2_PLACEMENT_3D('',#94835,#94836,#94837); +#94835 = CARTESIAN_POINT('',(0.375,2.5,0.)); +#94836 = DIRECTION('',(-0.,0.,-1.)); +#94837 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94838 = ADVANCED_FACE('',(#94839),#94845,.F.); +#94839 = FACE_BOUND('',#94840,.F.); +#94840 = EDGE_LOOP('',(#94841,#94842,#94843,#94844)); +#94841 = ORIENTED_EDGE('',*,*,#92418,.T.); +#94842 = ORIENTED_EDGE('',*,*,#94511,.T.); +#94843 = ORIENTED_EDGE('',*,*,#92279,.F.); +#94844 = ORIENTED_EDGE('',*,*,#94828,.F.); +#94845 = PLANE('',#94846); +#94846 = AXIS2_PLACEMENT_3D('',#94847,#94848,#94849); +#94847 = CARTESIAN_POINT('',(0.625,2.5,0.)); +#94848 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94849 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94850 = ADVANCED_FACE('',(#94851),#94862,.T.); +#94851 = FACE_BOUND('',#94852,.F.); +#94852 = EDGE_LOOP('',(#94853,#94854,#94855,#94856)); +#94853 = ORIENTED_EDGE('',*,*,#92432,.T.); +#94854 = ORIENTED_EDGE('',*,*,#92384,.T.); +#94855 = ORIENTED_EDGE('',*,*,#92309,.T.); +#94856 = ORIENTED_EDGE('',*,*,#94857,.T.); +#94857 = EDGE_CURVE('',#92312,#92433,#94858,.T.); +#94858 = LINE('',#94859,#94860); +#94859 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#94860 = VECTOR('',#94861,1.); +#94861 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94862 = PLANE('',#94863); +#94863 = AXIS2_PLACEMENT_3D('',#94864,#94865,#94866); +#94864 = CARTESIAN_POINT('',(-2.,-0.125,0.)); +#94865 = DIRECTION('',(0.,-0.,-1.)); +#94866 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94867 = ADVANCED_FACE('',(#94868),#94874,.F.); +#94868 = FACE_BOUND('',#94869,.F.); +#94869 = EDGE_LOOP('',(#94870,#94871,#94872,#94873)); +#94870 = ORIENTED_EDGE('',*,*,#92335,.T.); +#94871 = ORIENTED_EDGE('',*,*,#94664,.T.); +#94872 = ORIENTED_EDGE('',*,*,#92440,.F.); +#94873 = ORIENTED_EDGE('',*,*,#94857,.F.); +#94874 = PLANE('',#94875); +#94875 = AXIS2_PLACEMENT_3D('',#94876,#94877,#94878); +#94876 = CARTESIAN_POINT('',(-2.,0.125,0.)); +#94877 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94878 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94879 = ADVANCED_FACE('',(#94880),#94891,.T.); +#94880 = FACE_BOUND('',#94881,.F.); +#94881 = EDGE_LOOP('',(#94882,#94883,#94884,#94885)); +#94882 = ORIENTED_EDGE('',*,*,#92465,.T.); +#94883 = ORIENTED_EDGE('',*,*,#92555,.T.); +#94884 = ORIENTED_EDGE('',*,*,#92595,.T.); +#94885 = ORIENTED_EDGE('',*,*,#94886,.T.); +#94886 = EDGE_CURVE('',#92596,#92466,#94887,.T.); +#94887 = LINE('',#94888,#94889); +#94888 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#94889 = VECTOR('',#94890,1.); +#94890 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94891 = PLANE('',#94892); +#94892 = AXIS2_PLACEMENT_3D('',#94893,#94894,#94895); +#94893 = CARTESIAN_POINT('',(0.875,2.5,0.)); +#94894 = DIRECTION('',(-0.,0.,-1.)); +#94895 = DIRECTION('',(1.,-4.555315873023E-16,-0.)); +#94896 = ADVANCED_FACE('',(#94897),#94903,.F.); +#94897 = FACE_BOUND('',#94898,.F.); +#94898 = EDGE_LOOP('',(#94899,#94900,#94901,#94902)); +#94899 = ORIENTED_EDGE('',*,*,#92614,.T.); +#94900 = ORIENTED_EDGE('',*,*,#94494,.T.); +#94901 = ORIENTED_EDGE('',*,*,#92475,.F.); +#94902 = ORIENTED_EDGE('',*,*,#94886,.F.); +#94903 = PLANE('',#94904); +#94904 = AXIS2_PLACEMENT_3D('',#94905,#94906,#94907); +#94905 = CARTESIAN_POINT('',(1.125,2.5,0.)); +#94906 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#94907 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#94908 = ADVANCED_FACE('',(#94909),#94920,.T.); +#94909 = FACE_BOUND('',#94910,.F.); +#94910 = EDGE_LOOP('',(#94911,#94912,#94913,#94914)); +#94911 = ORIENTED_EDGE('',*,*,#92628,.T.); +#94912 = ORIENTED_EDGE('',*,*,#92580,.T.); +#94913 = ORIENTED_EDGE('',*,*,#92505,.T.); +#94914 = ORIENTED_EDGE('',*,*,#94915,.T.); +#94915 = EDGE_CURVE('',#92508,#92629,#94916,.T.); +#94916 = LINE('',#94917,#94918); +#94917 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#94918 = VECTOR('',#94919,1.); +#94919 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94920 = PLANE('',#94921); +#94921 = AXIS2_PLACEMENT_3D('',#94922,#94923,#94924); +#94922 = CARTESIAN_POINT('',(-2.,-0.625,0.)); +#94923 = DIRECTION('',(0.,-0.,-1.)); +#94924 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#94925 = ADVANCED_FACE('',(#94926),#94932,.F.); +#94926 = FACE_BOUND('',#94927,.F.); +#94927 = EDGE_LOOP('',(#94928,#94929,#94930,#94931)); +#94928 = ORIENTED_EDGE('',*,*,#92531,.T.); +#94929 = ORIENTED_EDGE('',*,*,#94647,.T.); +#94930 = ORIENTED_EDGE('',*,*,#92636,.F.); +#94931 = ORIENTED_EDGE('',*,*,#94915,.F.); +#94932 = PLANE('',#94933); +#94933 = AXIS2_PLACEMENT_3D('',#94934,#94935,#94936); +#94934 = CARTESIAN_POINT('',(-2.,-0.375,0.)); +#94935 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#94936 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#94937 = ADVANCED_FACE('',(#94938),#94949,.F.); +#94938 = FACE_BOUND('',#94939,.F.); +#94939 = EDGE_LOOP('',(#94940,#94941,#94947,#94948)); +#94940 = ORIENTED_EDGE('',*,*,#92904,.F.); +#94941 = ORIENTED_EDGE('',*,*,#94942,.F.); +#94942 = EDGE_CURVE('',#93021,#92897,#94943,.T.); +#94943 = LINE('',#94944,#94945); +#94944 = CARTESIAN_POINT('',(2.,1.375,0.2)); +#94945 = VECTOR('',#94946,1.); +#94946 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94947 = ORIENTED_EDGE('',*,*,#93020,.F.); +#94948 = ORIENTED_EDGE('',*,*,#92824,.T.); +#94949 = PLANE('',#94950); +#94950 = AXIS2_PLACEMENT_3D('',#94951,#94952,#94953); +#94951 = CARTESIAN_POINT('',(2.,1.625,0.2)); +#94952 = DIRECTION('',(0.,0.,-1.)); +#94953 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#94954 = ADVANCED_FACE('',(#94955),#94966,.F.); +#94955 = FACE_BOUND('',#94956,.F.); +#94956 = EDGE_LOOP('',(#94957,#94958,#94964,#94965)); +#94957 = ORIENTED_EDGE('',*,*,#94172,.F.); +#94958 = ORIENTED_EDGE('',*,*,#94959,.F.); +#94959 = EDGE_CURVE('',#94296,#94165,#94960,.T.); +#94960 = LINE('',#94961,#94962); +#94961 = CARTESIAN_POINT('',(2.,-1.625,0.2)); +#94962 = VECTOR('',#94963,1.); +#94963 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94964 = ORIENTED_EDGE('',*,*,#94295,.F.); +#94965 = ORIENTED_EDGE('',*,*,#92686,.T.); +#94966 = PLANE('',#94967); +#94967 = AXIS2_PLACEMENT_3D('',#94968,#94969,#94970); +#94968 = CARTESIAN_POINT('',(2.,-1.375,0.2)); +#94969 = DIRECTION('',(0.,0.,-1.)); +#94970 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#94971 = ADVANCED_FACE('',(#94972),#94983,.F.); +#94972 = FACE_BOUND('',#94973,.F.); +#94973 = EDGE_LOOP('',(#94974,#94975,#94981,#94982)); +#94974 = ORIENTED_EDGE('',*,*,#93100,.F.); +#94975 = ORIENTED_EDGE('',*,*,#94976,.F.); +#94976 = EDGE_CURVE('',#93217,#93093,#94977,.T.); +#94977 = LINE('',#94978,#94979); +#94978 = CARTESIAN_POINT('',(2.,0.875,0.2)); +#94979 = VECTOR('',#94980,1.); +#94980 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94981 = ORIENTED_EDGE('',*,*,#93216,.F.); +#94982 = ORIENTED_EDGE('',*,*,#92801,.T.); +#94983 = PLANE('',#94984); +#94984 = AXIS2_PLACEMENT_3D('',#94985,#94986,#94987); +#94985 = CARTESIAN_POINT('',(2.,1.125,0.2)); +#94986 = DIRECTION('',(0.,0.,-1.)); +#94987 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#94988 = ADVANCED_FACE('',(#94989),#95000,.F.); +#94989 = FACE_BOUND('',#94990,.F.); +#94990 = EDGE_LOOP('',(#94991,#94992,#94998,#94999)); +#94991 = ORIENTED_EDGE('',*,*,#93976,.F.); +#94992 = ORIENTED_EDGE('',*,*,#94993,.F.); +#94993 = EDGE_CURVE('',#94100,#93969,#94994,.T.); +#94994 = LINE('',#94995,#94996); +#94995 = CARTESIAN_POINT('',(2.,-1.125,0.2)); +#94996 = VECTOR('',#94997,1.); +#94997 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#94998 = ORIENTED_EDGE('',*,*,#94099,.F.); +#94999 = ORIENTED_EDGE('',*,*,#92709,.T.); +#95000 = PLANE('',#95001); +#95001 = AXIS2_PLACEMENT_3D('',#95002,#95003,#95004); +#95002 = CARTESIAN_POINT('',(2.,-0.875,0.2)); +#95003 = DIRECTION('',(0.,0.,-1.)); +#95004 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95005 = ADVANCED_FACE('',(#95006),#95017,.F.); +#95006 = FACE_BOUND('',#95007,.F.); +#95007 = EDGE_LOOP('',(#95008,#95009,#95015,#95016)); +#95008 = ORIENTED_EDGE('',*,*,#93388,.F.); +#95009 = ORIENTED_EDGE('',*,*,#95010,.F.); +#95010 = EDGE_CURVE('',#93512,#93381,#95011,.T.); +#95011 = LINE('',#95012,#95013); +#95012 = CARTESIAN_POINT('',(2.,0.375,0.2)); +#95013 = VECTOR('',#95014,1.); +#95014 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95015 = ORIENTED_EDGE('',*,*,#93511,.F.); +#95016 = ORIENTED_EDGE('',*,*,#92778,.T.); +#95017 = PLANE('',#95018); +#95018 = AXIS2_PLACEMENT_3D('',#95019,#95020,#95021); +#95019 = CARTESIAN_POINT('',(2.,0.625,0.2)); +#95020 = DIRECTION('',(0.,0.,-1.)); +#95021 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95022 = ADVANCED_FACE('',(#95023),#95034,.F.); +#95023 = FACE_BOUND('',#95024,.F.); +#95024 = EDGE_LOOP('',(#95025,#95026,#95032,#95033)); +#95025 = ORIENTED_EDGE('',*,*,#93780,.F.); +#95026 = ORIENTED_EDGE('',*,*,#95027,.F.); +#95027 = EDGE_CURVE('',#93904,#93773,#95028,.T.); +#95028 = LINE('',#95029,#95030); +#95029 = CARTESIAN_POINT('',(2.,-0.625,0.2)); +#95030 = VECTOR('',#95031,1.); +#95031 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95032 = ORIENTED_EDGE('',*,*,#93903,.F.); +#95033 = ORIENTED_EDGE('',*,*,#92732,.T.); +#95034 = PLANE('',#95035); +#95035 = AXIS2_PLACEMENT_3D('',#95036,#95037,#95038); +#95036 = CARTESIAN_POINT('',(2.,-0.375,0.2)); +#95037 = DIRECTION('',(0.,0.,-1.)); +#95038 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95039 = ADVANCED_FACE('',(#95040),#95051,.F.); +#95040 = FACE_BOUND('',#95041,.F.); +#95041 = EDGE_LOOP('',(#95042,#95043,#95049,#95050)); +#95042 = ORIENTED_EDGE('',*,*,#93584,.F.); +#95043 = ORIENTED_EDGE('',*,*,#95044,.F.); +#95044 = EDGE_CURVE('',#93708,#93577,#95045,.T.); +#95045 = LINE('',#95046,#95047); +#95046 = CARTESIAN_POINT('',(2.,-0.125,0.2)); +#95047 = VECTOR('',#95048,1.); +#95048 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95049 = ORIENTED_EDGE('',*,*,#93707,.F.); +#95050 = ORIENTED_EDGE('',*,*,#92755,.T.); +#95051 = PLANE('',#95052); +#95052 = AXIS2_PLACEMENT_3D('',#95053,#95054,#95055); +#95053 = CARTESIAN_POINT('',(2.,0.125,0.2)); +#95054 = DIRECTION('',(0.,0.,-1.)); +#95055 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95056 = ADVANCED_FACE('',(#95057),#95068,.T.); +#95057 = FACE_BOUND('',#95058,.F.); +#95058 = EDGE_LOOP('',(#95059,#95060,#95061,#95062)); +#95059 = ORIENTED_EDGE('',*,*,#92976,.T.); +#95060 = ORIENTED_EDGE('',*,*,#92936,.T.); +#95061 = ORIENTED_EDGE('',*,*,#92846,.T.); +#95062 = ORIENTED_EDGE('',*,*,#95063,.T.); +#95063 = EDGE_CURVE('',#92849,#92977,#95064,.T.); +#95064 = LINE('',#95065,#95066); +#95065 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#95066 = VECTOR('',#95067,1.); +#95067 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95068 = PLANE('',#95069); +#95069 = AXIS2_PLACEMENT_3D('',#95070,#95071,#95072); +#95070 = CARTESIAN_POINT('',(-2.,-1.125,0.)); +#95071 = DIRECTION('',(0.,-0.,-1.)); +#95072 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#95073 = ADVANCED_FACE('',(#95074),#95080,.F.); +#95074 = FACE_BOUND('',#95075,.F.); +#95075 = EDGE_LOOP('',(#95076,#95077,#95078,#95079)); +#95076 = ORIENTED_EDGE('',*,*,#92872,.T.); +#95077 = ORIENTED_EDGE('',*,*,#94613,.T.); +#95078 = ORIENTED_EDGE('',*,*,#92984,.F.); +#95079 = ORIENTED_EDGE('',*,*,#95063,.F.); +#95080 = PLANE('',#95081); +#95081 = AXIS2_PLACEMENT_3D('',#95082,#95083,#95084); +#95082 = CARTESIAN_POINT('',(-2.,-0.875,0.)); +#95083 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#95084 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95085 = ADVANCED_FACE('',(#95086),#95097,.T.); +#95086 = FACE_BOUND('',#95087,.F.); +#95087 = EDGE_LOOP('',(#95088,#95089,#95090,#95091)); +#95088 = ORIENTED_EDGE('',*,*,#92886,.T.); +#95089 = ORIENTED_EDGE('',*,*,#92961,.T.); +#95090 = ORIENTED_EDGE('',*,*,#93009,.T.); +#95091 = ORIENTED_EDGE('',*,*,#95092,.T.); +#95092 = EDGE_CURVE('',#93010,#92887,#95093,.T.); +#95093 = LINE('',#95094,#95095); +#95094 = CARTESIAN_POINT('',(2.,1.375,0.)); +#95095 = VECTOR('',#95096,1.); +#95096 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95097 = PLANE('',#95098); +#95098 = AXIS2_PLACEMENT_3D('',#95099,#95100,#95101); +#95099 = CARTESIAN_POINT('',(2.,1.625,0.)); +#95100 = DIRECTION('',(0.,0.,-1.)); +#95101 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95102 = ADVANCED_FACE('',(#95103),#95109,.F.); +#95103 = FACE_BOUND('',#95104,.F.); +#95104 = EDGE_LOOP('',(#95105,#95106,#95107,#95108)); +#95105 = ORIENTED_EDGE('',*,*,#93028,.T.); +#95106 = ORIENTED_EDGE('',*,*,#94942,.T.); +#95107 = ORIENTED_EDGE('',*,*,#92896,.F.); +#95108 = ORIENTED_EDGE('',*,*,#95092,.F.); +#95109 = PLANE('',#95110); +#95110 = AXIS2_PLACEMENT_3D('',#95111,#95112,#95113); +#95111 = CARTESIAN_POINT('',(2.,1.375,0.)); +#95112 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95113 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95114 = ADVANCED_FACE('',(#95115),#95126,.T.); +#95115 = FACE_BOUND('',#95116,.F.); +#95116 = EDGE_LOOP('',(#95117,#95118,#95119,#95120)); +#95117 = ORIENTED_EDGE('',*,*,#93172,.T.); +#95118 = ORIENTED_EDGE('',*,*,#93132,.T.); +#95119 = ORIENTED_EDGE('',*,*,#93042,.T.); +#95120 = ORIENTED_EDGE('',*,*,#95121,.T.); +#95121 = EDGE_CURVE('',#93045,#93173,#95122,.T.); +#95122 = LINE('',#95123,#95124); +#95123 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#95124 = VECTOR('',#95125,1.); +#95125 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95126 = PLANE('',#95127); +#95127 = AXIS2_PLACEMENT_3D('',#95128,#95129,#95130); +#95128 = CARTESIAN_POINT('',(-2.,-1.625,0.)); +#95129 = DIRECTION('',(0.,-0.,-1.)); +#95130 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#95131 = ADVANCED_FACE('',(#95132),#95138,.F.); +#95132 = FACE_BOUND('',#95133,.F.); +#95133 = EDGE_LOOP('',(#95134,#95135,#95136,#95137)); +#95134 = ORIENTED_EDGE('',*,*,#93068,.T.); +#95135 = ORIENTED_EDGE('',*,*,#94579,.T.); +#95136 = ORIENTED_EDGE('',*,*,#93180,.F.); +#95137 = ORIENTED_EDGE('',*,*,#95121,.F.); +#95138 = PLANE('',#95139); +#95139 = AXIS2_PLACEMENT_3D('',#95140,#95141,#95142); +#95140 = CARTESIAN_POINT('',(-2.,-1.375,0.)); +#95141 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#95142 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#95143 = ADVANCED_FACE('',(#95144),#95155,.T.); +#95144 = FACE_BOUND('',#95145,.F.); +#95145 = EDGE_LOOP('',(#95146,#95147,#95148,#95149)); +#95146 = ORIENTED_EDGE('',*,*,#93082,.T.); +#95147 = ORIENTED_EDGE('',*,*,#93157,.T.); +#95148 = ORIENTED_EDGE('',*,*,#93205,.T.); +#95149 = ORIENTED_EDGE('',*,*,#95150,.T.); +#95150 = EDGE_CURVE('',#93206,#93083,#95151,.T.); +#95151 = LINE('',#95152,#95153); +#95152 = CARTESIAN_POINT('',(2.,0.875,0.)); +#95153 = VECTOR('',#95154,1.); +#95154 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95155 = PLANE('',#95156); +#95156 = AXIS2_PLACEMENT_3D('',#95157,#95158,#95159); +#95157 = CARTESIAN_POINT('',(2.,1.125,0.)); +#95158 = DIRECTION('',(0.,0.,-1.)); +#95159 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95160 = ADVANCED_FACE('',(#95161),#95167,.F.); +#95161 = FACE_BOUND('',#95162,.F.); +#95162 = EDGE_LOOP('',(#95163,#95164,#95165,#95166)); +#95163 = ORIENTED_EDGE('',*,*,#93224,.T.); +#95164 = ORIENTED_EDGE('',*,*,#94976,.T.); +#95165 = ORIENTED_EDGE('',*,*,#93092,.F.); +#95166 = ORIENTED_EDGE('',*,*,#95150,.F.); +#95167 = PLANE('',#95168); +#95168 = AXIS2_PLACEMENT_3D('',#95169,#95170,#95171); +#95169 = CARTESIAN_POINT('',(2.,0.875,0.)); +#95170 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95171 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95172 = ADVANCED_FACE('',(#95173),#95184,.F.); +#95173 = FACE_BOUND('',#95174,.F.); +#95174 = EDGE_LOOP('',(#95175,#95176,#95182,#95183)); +#95175 = ORIENTED_EDGE('',*,*,#94333,.F.); +#95176 = ORIENTED_EDGE('',*,*,#95177,.F.); +#95177 = EDGE_CURVE('',#94213,#94326,#95178,.T.); +#95178 = LINE('',#95179,#95180); +#95179 = CARTESIAN_POINT('',(0.875,-2.5,0.2)); +#95180 = VECTOR('',#95181,1.); +#95181 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95182 = ORIENTED_EDGE('',*,*,#94212,.F.); +#95183 = ORIENTED_EDGE('',*,*,#93346,.T.); +#95184 = PLANE('',#95185); +#95185 = AXIS2_PLACEMENT_3D('',#95186,#95187,#95188); +#95186 = CARTESIAN_POINT('',(1.125,-2.5,0.2)); +#95187 = DIRECTION('',(0.,0.,-1.)); +#95188 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95189 = ADVANCED_FACE('',(#95190),#95201,.F.); +#95190 = FACE_BOUND('',#95191,.F.); +#95191 = EDGE_LOOP('',(#95192,#95193,#95199,#95200)); +#95192 = ORIENTED_EDGE('',*,*,#93549,.F.); +#95193 = ORIENTED_EDGE('',*,*,#95194,.F.); +#95194 = EDGE_CURVE('',#93429,#93542,#95195,.T.); +#95195 = LINE('',#95196,#95197); +#95196 = CARTESIAN_POINT('',(-1.125,-2.5,0.2)); +#95197 = VECTOR('',#95198,1.); +#95198 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95199 = ORIENTED_EDGE('',*,*,#93428,.F.); +#95200 = ORIENTED_EDGE('',*,*,#93254,.T.); +#95201 = PLANE('',#95202); +#95202 = AXIS2_PLACEMENT_3D('',#95203,#95204,#95205); +#95203 = CARTESIAN_POINT('',(-0.875,-2.5,0.2)); +#95204 = DIRECTION('',(0.,0.,-1.)); +#95205 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95206 = ADVANCED_FACE('',(#95207),#95218,.F.); +#95207 = FACE_BOUND('',#95208,.F.); +#95208 = EDGE_LOOP('',(#95209,#95210,#95216,#95217)); +#95209 = ORIENTED_EDGE('',*,*,#94137,.F.); +#95210 = ORIENTED_EDGE('',*,*,#95211,.F.); +#95211 = EDGE_CURVE('',#94017,#94130,#95212,.T.); +#95212 = LINE('',#95213,#95214); +#95213 = CARTESIAN_POINT('',(0.375,-2.5,0.2)); +#95214 = VECTOR('',#95215,1.); +#95215 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95216 = ORIENTED_EDGE('',*,*,#94016,.F.); +#95217 = ORIENTED_EDGE('',*,*,#93323,.T.); +#95218 = PLANE('',#95219); +#95219 = AXIS2_PLACEMENT_3D('',#95220,#95221,#95222); +#95220 = CARTESIAN_POINT('',(0.625,-2.5,0.2)); +#95221 = DIRECTION('',(0.,0.,-1.)); +#95222 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95223 = ADVANCED_FACE('',(#95224),#95235,.F.); +#95224 = FACE_BOUND('',#95225,.F.); +#95225 = EDGE_LOOP('',(#95226,#95227,#95233,#95234)); +#95226 = ORIENTED_EDGE('',*,*,#93745,.F.); +#95227 = ORIENTED_EDGE('',*,*,#95228,.F.); +#95228 = EDGE_CURVE('',#93625,#93738,#95229,.T.); +#95229 = LINE('',#95230,#95231); +#95230 = CARTESIAN_POINT('',(-0.625,-2.5,0.2)); +#95231 = VECTOR('',#95232,1.); +#95232 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95233 = ORIENTED_EDGE('',*,*,#93624,.F.); +#95234 = ORIENTED_EDGE('',*,*,#93277,.T.); +#95235 = PLANE('',#95236); +#95236 = AXIS2_PLACEMENT_3D('',#95237,#95238,#95239); +#95237 = CARTESIAN_POINT('',(-0.375,-2.5,0.2)); +#95238 = DIRECTION('',(0.,0.,-1.)); +#95239 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95240 = ADVANCED_FACE('',(#95241),#95252,.F.); +#95241 = FACE_BOUND('',#95242,.F.); +#95242 = EDGE_LOOP('',(#95243,#95244,#95250,#95251)); +#95243 = ORIENTED_EDGE('',*,*,#93941,.F.); +#95244 = ORIENTED_EDGE('',*,*,#95245,.F.); +#95245 = EDGE_CURVE('',#93821,#93934,#95246,.T.); +#95246 = LINE('',#95247,#95248); +#95247 = CARTESIAN_POINT('',(-0.125,-2.5,0.2)); +#95248 = VECTOR('',#95249,1.); +#95249 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95250 = ORIENTED_EDGE('',*,*,#93820,.F.); +#95251 = ORIENTED_EDGE('',*,*,#93300,.T.); +#95252 = PLANE('',#95253); +#95253 = AXIS2_PLACEMENT_3D('',#95254,#95255,#95256); +#95254 = CARTESIAN_POINT('',(0.125,-2.5,0.2)); +#95255 = DIRECTION('',(0.,0.,-1.)); +#95256 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95257 = ADVANCED_FACE('',(#95258),#95269,.T.); +#95258 = FACE_BOUND('',#95259,.F.); +#95259 = EDGE_LOOP('',(#95260,#95261,#95262,#95263)); +#95260 = ORIENTED_EDGE('',*,*,#93370,.T.); +#95261 = ORIENTED_EDGE('',*,*,#93460,.T.); +#95262 = ORIENTED_EDGE('',*,*,#93500,.T.); +#95263 = ORIENTED_EDGE('',*,*,#95264,.T.); +#95264 = EDGE_CURVE('',#93501,#93371,#95265,.T.); +#95265 = LINE('',#95266,#95267); +#95266 = CARTESIAN_POINT('',(2.,0.375,0.)); +#95267 = VECTOR('',#95268,1.); +#95268 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95269 = PLANE('',#95270); +#95270 = AXIS2_PLACEMENT_3D('',#95271,#95272,#95273); +#95271 = CARTESIAN_POINT('',(2.,0.625,0.)); +#95272 = DIRECTION('',(0.,0.,-1.)); +#95273 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95274 = ADVANCED_FACE('',(#95275),#95281,.F.); +#95275 = FACE_BOUND('',#95276,.F.); +#95276 = EDGE_LOOP('',(#95277,#95278,#95279,#95280)); +#95277 = ORIENTED_EDGE('',*,*,#93519,.T.); +#95278 = ORIENTED_EDGE('',*,*,#95010,.T.); +#95279 = ORIENTED_EDGE('',*,*,#93380,.F.); +#95280 = ORIENTED_EDGE('',*,*,#95264,.F.); +#95281 = PLANE('',#95282); +#95282 = AXIS2_PLACEMENT_3D('',#95283,#95284,#95285); +#95283 = CARTESIAN_POINT('',(2.,0.375,0.)); +#95284 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95285 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95286 = ADVANCED_FACE('',(#95287),#95298,.T.); +#95287 = FACE_BOUND('',#95288,.F.); +#95288 = EDGE_LOOP('',(#95289,#95290,#95291,#95292)); +#95289 = ORIENTED_EDGE('',*,*,#93533,.T.); +#95290 = ORIENTED_EDGE('',*,*,#93485,.T.); +#95291 = ORIENTED_EDGE('',*,*,#93410,.T.); +#95292 = ORIENTED_EDGE('',*,*,#95293,.T.); +#95293 = EDGE_CURVE('',#93413,#93534,#95294,.T.); +#95294 = LINE('',#95295,#95296); +#95295 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#95296 = VECTOR('',#95297,1.); +#95297 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95298 = PLANE('',#95299); +#95299 = AXIS2_PLACEMENT_3D('',#95300,#95301,#95302); +#95300 = CARTESIAN_POINT('',(-0.875,-2.5,0.)); +#95301 = DIRECTION('',(0.,0.,-1.)); +#95302 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95303 = ADVANCED_FACE('',(#95304),#95310,.F.); +#95304 = FACE_BOUND('',#95305,.F.); +#95305 = EDGE_LOOP('',(#95306,#95307,#95308,#95309)); +#95306 = ORIENTED_EDGE('',*,*,#93436,.T.); +#95307 = ORIENTED_EDGE('',*,*,#95194,.T.); +#95308 = ORIENTED_EDGE('',*,*,#93541,.F.); +#95309 = ORIENTED_EDGE('',*,*,#95293,.F.); +#95310 = PLANE('',#95311); +#95311 = AXIS2_PLACEMENT_3D('',#95312,#95313,#95314); +#95312 = CARTESIAN_POINT('',(-1.125,-2.5,0.)); +#95313 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95314 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95315 = ADVANCED_FACE('',(#95316),#95327,.T.); +#95316 = FACE_BOUND('',#95317,.F.); +#95317 = EDGE_LOOP('',(#95318,#95319,#95320,#95321)); +#95318 = ORIENTED_EDGE('',*,*,#93566,.T.); +#95319 = ORIENTED_EDGE('',*,*,#93656,.T.); +#95320 = ORIENTED_EDGE('',*,*,#93696,.T.); +#95321 = ORIENTED_EDGE('',*,*,#95322,.T.); +#95322 = EDGE_CURVE('',#93697,#93567,#95323,.T.); +#95323 = LINE('',#95324,#95325); +#95324 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#95325 = VECTOR('',#95326,1.); +#95326 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95327 = PLANE('',#95328); +#95328 = AXIS2_PLACEMENT_3D('',#95329,#95330,#95331); +#95329 = CARTESIAN_POINT('',(2.,0.125,0.)); +#95330 = DIRECTION('',(0.,0.,-1.)); +#95331 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95332 = ADVANCED_FACE('',(#95333),#95339,.F.); +#95333 = FACE_BOUND('',#95334,.F.); +#95334 = EDGE_LOOP('',(#95335,#95336,#95337,#95338)); +#95335 = ORIENTED_EDGE('',*,*,#93715,.T.); +#95336 = ORIENTED_EDGE('',*,*,#95044,.T.); +#95337 = ORIENTED_EDGE('',*,*,#93576,.F.); +#95338 = ORIENTED_EDGE('',*,*,#95322,.F.); +#95339 = PLANE('',#95340); +#95340 = AXIS2_PLACEMENT_3D('',#95341,#95342,#95343); +#95341 = CARTESIAN_POINT('',(2.,-0.125,0.)); +#95342 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95343 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95344 = ADVANCED_FACE('',(#95345),#95356,.T.); +#95345 = FACE_BOUND('',#95346,.F.); +#95346 = EDGE_LOOP('',(#95347,#95348,#95349,#95350)); +#95347 = ORIENTED_EDGE('',*,*,#93729,.T.); +#95348 = ORIENTED_EDGE('',*,*,#93681,.T.); +#95349 = ORIENTED_EDGE('',*,*,#93606,.T.); +#95350 = ORIENTED_EDGE('',*,*,#95351,.T.); +#95351 = EDGE_CURVE('',#93609,#93730,#95352,.T.); +#95352 = LINE('',#95353,#95354); +#95353 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#95354 = VECTOR('',#95355,1.); +#95355 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95356 = PLANE('',#95357); +#95357 = AXIS2_PLACEMENT_3D('',#95358,#95359,#95360); +#95358 = CARTESIAN_POINT('',(-0.375,-2.5,0.)); +#95359 = DIRECTION('',(0.,0.,-1.)); +#95360 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95361 = ADVANCED_FACE('',(#95362),#95368,.F.); +#95362 = FACE_BOUND('',#95363,.F.); +#95363 = EDGE_LOOP('',(#95364,#95365,#95366,#95367)); +#95364 = ORIENTED_EDGE('',*,*,#93632,.T.); +#95365 = ORIENTED_EDGE('',*,*,#95228,.T.); +#95366 = ORIENTED_EDGE('',*,*,#93737,.F.); +#95367 = ORIENTED_EDGE('',*,*,#95351,.F.); +#95368 = PLANE('',#95369); +#95369 = AXIS2_PLACEMENT_3D('',#95370,#95371,#95372); +#95370 = CARTESIAN_POINT('',(-0.625,-2.5,0.)); +#95371 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95372 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95373 = ADVANCED_FACE('',(#95374),#95385,.T.); +#95374 = FACE_BOUND('',#95375,.F.); +#95375 = EDGE_LOOP('',(#95376,#95377,#95378,#95379)); +#95376 = ORIENTED_EDGE('',*,*,#93762,.T.); +#95377 = ORIENTED_EDGE('',*,*,#93852,.T.); +#95378 = ORIENTED_EDGE('',*,*,#93892,.T.); +#95379 = ORIENTED_EDGE('',*,*,#95380,.T.); +#95380 = EDGE_CURVE('',#93893,#93763,#95381,.T.); +#95381 = LINE('',#95382,#95383); +#95382 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#95383 = VECTOR('',#95384,1.); +#95384 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95385 = PLANE('',#95386); +#95386 = AXIS2_PLACEMENT_3D('',#95387,#95388,#95389); +#95387 = CARTESIAN_POINT('',(2.,-0.375,0.)); +#95388 = DIRECTION('',(0.,0.,-1.)); +#95389 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95390 = ADVANCED_FACE('',(#95391),#95397,.F.); +#95391 = FACE_BOUND('',#95392,.F.); +#95392 = EDGE_LOOP('',(#95393,#95394,#95395,#95396)); +#95393 = ORIENTED_EDGE('',*,*,#93911,.T.); +#95394 = ORIENTED_EDGE('',*,*,#95027,.T.); +#95395 = ORIENTED_EDGE('',*,*,#93772,.F.); +#95396 = ORIENTED_EDGE('',*,*,#95380,.F.); +#95397 = PLANE('',#95398); +#95398 = AXIS2_PLACEMENT_3D('',#95399,#95400,#95401); +#95399 = CARTESIAN_POINT('',(2.,-0.625,0.)); +#95400 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95401 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95402 = ADVANCED_FACE('',(#95403),#95414,.T.); +#95403 = FACE_BOUND('',#95404,.F.); +#95404 = EDGE_LOOP('',(#95405,#95406,#95407,#95408)); +#95405 = ORIENTED_EDGE('',*,*,#93925,.T.); +#95406 = ORIENTED_EDGE('',*,*,#93877,.T.); +#95407 = ORIENTED_EDGE('',*,*,#93802,.T.); +#95408 = ORIENTED_EDGE('',*,*,#95409,.T.); +#95409 = EDGE_CURVE('',#93805,#93926,#95410,.T.); +#95410 = LINE('',#95411,#95412); +#95411 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#95412 = VECTOR('',#95413,1.); +#95413 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95414 = PLANE('',#95415); +#95415 = AXIS2_PLACEMENT_3D('',#95416,#95417,#95418); +#95416 = CARTESIAN_POINT('',(0.125,-2.5,0.)); +#95417 = DIRECTION('',(0.,0.,-1.)); +#95418 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95419 = ADVANCED_FACE('',(#95420),#95426,.F.); +#95420 = FACE_BOUND('',#95421,.F.); +#95421 = EDGE_LOOP('',(#95422,#95423,#95424,#95425)); +#95422 = ORIENTED_EDGE('',*,*,#93828,.T.); +#95423 = ORIENTED_EDGE('',*,*,#95245,.T.); +#95424 = ORIENTED_EDGE('',*,*,#93933,.F.); +#95425 = ORIENTED_EDGE('',*,*,#95409,.F.); +#95426 = PLANE('',#95427); +#95427 = AXIS2_PLACEMENT_3D('',#95428,#95429,#95430); +#95428 = CARTESIAN_POINT('',(-0.125,-2.5,0.)); +#95429 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95430 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95431 = ADVANCED_FACE('',(#95432),#95443,.T.); +#95432 = FACE_BOUND('',#95433,.F.); +#95433 = EDGE_LOOP('',(#95434,#95435,#95436,#95437)); +#95434 = ORIENTED_EDGE('',*,*,#93958,.T.); +#95435 = ORIENTED_EDGE('',*,*,#94048,.T.); +#95436 = ORIENTED_EDGE('',*,*,#94088,.T.); +#95437 = ORIENTED_EDGE('',*,*,#95438,.T.); +#95438 = EDGE_CURVE('',#94089,#93959,#95439,.T.); +#95439 = LINE('',#95440,#95441); +#95440 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#95441 = VECTOR('',#95442,1.); +#95442 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95443 = PLANE('',#95444); +#95444 = AXIS2_PLACEMENT_3D('',#95445,#95446,#95447); +#95445 = CARTESIAN_POINT('',(2.,-0.875,0.)); +#95446 = DIRECTION('',(0.,0.,-1.)); +#95447 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95448 = ADVANCED_FACE('',(#95449),#95455,.F.); +#95449 = FACE_BOUND('',#95450,.F.); +#95450 = EDGE_LOOP('',(#95451,#95452,#95453,#95454)); +#95451 = ORIENTED_EDGE('',*,*,#94107,.T.); +#95452 = ORIENTED_EDGE('',*,*,#94993,.T.); +#95453 = ORIENTED_EDGE('',*,*,#93968,.F.); +#95454 = ORIENTED_EDGE('',*,*,#95438,.F.); +#95455 = PLANE('',#95456); +#95456 = AXIS2_PLACEMENT_3D('',#95457,#95458,#95459); +#95457 = CARTESIAN_POINT('',(2.,-1.125,0.)); +#95458 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95459 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95460 = ADVANCED_FACE('',(#95461),#95472,.T.); +#95461 = FACE_BOUND('',#95462,.F.); +#95462 = EDGE_LOOP('',(#95463,#95464,#95465,#95466)); +#95463 = ORIENTED_EDGE('',*,*,#94121,.T.); +#95464 = ORIENTED_EDGE('',*,*,#94073,.T.); +#95465 = ORIENTED_EDGE('',*,*,#93998,.T.); +#95466 = ORIENTED_EDGE('',*,*,#95467,.T.); +#95467 = EDGE_CURVE('',#94001,#94122,#95468,.T.); +#95468 = LINE('',#95469,#95470); +#95469 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#95470 = VECTOR('',#95471,1.); +#95471 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95472 = PLANE('',#95473); +#95473 = AXIS2_PLACEMENT_3D('',#95474,#95475,#95476); +#95474 = CARTESIAN_POINT('',(0.625,-2.5,0.)); +#95475 = DIRECTION('',(0.,0.,-1.)); +#95476 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95477 = ADVANCED_FACE('',(#95478),#95484,.F.); +#95478 = FACE_BOUND('',#95479,.F.); +#95479 = EDGE_LOOP('',(#95480,#95481,#95482,#95483)); +#95480 = ORIENTED_EDGE('',*,*,#94024,.T.); +#95481 = ORIENTED_EDGE('',*,*,#95211,.T.); +#95482 = ORIENTED_EDGE('',*,*,#94129,.F.); +#95483 = ORIENTED_EDGE('',*,*,#95467,.F.); +#95484 = PLANE('',#95485); +#95485 = AXIS2_PLACEMENT_3D('',#95486,#95487,#95488); +#95486 = CARTESIAN_POINT('',(0.375,-2.5,0.)); +#95487 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95488 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95489 = ADVANCED_FACE('',(#95490),#95501,.T.); +#95490 = FACE_BOUND('',#95491,.F.); +#95491 = EDGE_LOOP('',(#95492,#95493,#95494,#95495)); +#95492 = ORIENTED_EDGE('',*,*,#94154,.T.); +#95493 = ORIENTED_EDGE('',*,*,#94244,.T.); +#95494 = ORIENTED_EDGE('',*,*,#94284,.T.); +#95495 = ORIENTED_EDGE('',*,*,#95496,.T.); +#95496 = EDGE_CURVE('',#94285,#94155,#95497,.T.); +#95497 = LINE('',#95498,#95499); +#95498 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#95499 = VECTOR('',#95500,1.); +#95500 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95501 = PLANE('',#95502); +#95502 = AXIS2_PLACEMENT_3D('',#95503,#95504,#95505); +#95503 = CARTESIAN_POINT('',(2.,-1.375,0.)); +#95504 = DIRECTION('',(0.,0.,-1.)); +#95505 = DIRECTION('',(-3.445092848398E-16,-1.,-0.)); +#95506 = ADVANCED_FACE('',(#95507),#95513,.F.); +#95507 = FACE_BOUND('',#95508,.F.); +#95508 = EDGE_LOOP('',(#95509,#95510,#95511,#95512)); +#95509 = ORIENTED_EDGE('',*,*,#94303,.T.); +#95510 = ORIENTED_EDGE('',*,*,#94959,.T.); +#95511 = ORIENTED_EDGE('',*,*,#94164,.F.); +#95512 = ORIENTED_EDGE('',*,*,#95496,.F.); +#95513 = PLANE('',#95514); +#95514 = AXIS2_PLACEMENT_3D('',#95515,#95516,#95517); +#95515 = CARTESIAN_POINT('',(2.,-1.625,0.)); +#95516 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#95517 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#95518 = ADVANCED_FACE('',(#95519),#95530,.T.); +#95519 = FACE_BOUND('',#95520,.F.); +#95520 = EDGE_LOOP('',(#95521,#95522,#95523,#95524)); +#95521 = ORIENTED_EDGE('',*,*,#94317,.T.); +#95522 = ORIENTED_EDGE('',*,*,#94269,.T.); +#95523 = ORIENTED_EDGE('',*,*,#94194,.T.); +#95524 = ORIENTED_EDGE('',*,*,#95525,.T.); +#95525 = EDGE_CURVE('',#94197,#94318,#95526,.T.); +#95526 = LINE('',#95527,#95528); +#95527 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#95528 = VECTOR('',#95529,1.); +#95529 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95530 = PLANE('',#95531); +#95531 = AXIS2_PLACEMENT_3D('',#95532,#95533,#95534); +#95532 = CARTESIAN_POINT('',(1.125,-2.5,0.)); +#95533 = DIRECTION('',(0.,0.,-1.)); +#95534 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#95535 = ADVANCED_FACE('',(#95536),#95542,.F.); +#95536 = FACE_BOUND('',#95537,.F.); +#95537 = EDGE_LOOP('',(#95538,#95539,#95540,#95541)); +#95538 = ORIENTED_EDGE('',*,*,#94220,.T.); +#95539 = ORIENTED_EDGE('',*,*,#95177,.T.); +#95540 = ORIENTED_EDGE('',*,*,#94325,.F.); +#95541 = ORIENTED_EDGE('',*,*,#95525,.F.); +#95542 = PLANE('',#95543); +#95543 = AXIS2_PLACEMENT_3D('',#95544,#95545,#95546); +#95544 = CARTESIAN_POINT('',(0.875,-2.5,0.)); +#95545 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#95546 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#95547 = ADVANCED_FACE('',(#95548),#95555,.T.); +#95548 = FACE_BOUND('',#95549,.F.); +#95549 = EDGE_LOOP('',(#95550,#95551,#95552,#95553,#95554)); +#95550 = ORIENTED_EDGE('',*,*,#94367,.T.); +#95551 = ORIENTED_EDGE('',*,*,#94391,.T.); +#95552 = ORIENTED_EDGE('',*,*,#94415,.T.); +#95553 = ORIENTED_EDGE('',*,*,#94439,.T.); +#95554 = ORIENTED_EDGE('',*,*,#94456,.T.); +#95555 = PLANE('',#95556); +#95556 = AXIS2_PLACEMENT_3D('',#95557,#95558,#95559); +#95557 = CARTESIAN_POINT('',(-1.325,1.625,0.)); +#95558 = DIRECTION('',(0.,-0.,-1.)); +#95559 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#95560 = ADVANCED_FACE('',(#95561),#95580,.F.); +#95561 = FACE_BOUND('',#95562,.F.); +#95562 = EDGE_LOOP('',(#95563,#95571,#95578,#95579)); +#95563 = ORIENTED_EDGE('',*,*,#95564,.T.); +#95564 = EDGE_CURVE('',#94477,#95565,#95567,.T.); +#95565 = VERTEX_POINT('',#95566); +#95566 = CARTESIAN_POINT('',(-1.4,1.65,0.76)); +#95567 = LINE('',#95568,#95569); +#95568 = CARTESIAN_POINT('',(-1.4,1.65,0.78)); +#95569 = VECTOR('',#95570,1.); +#95570 = DIRECTION('',(-0.,0.,-1.)); +#95571 = ORIENTED_EDGE('',*,*,#95572,.T.); +#95572 = EDGE_CURVE('',#95565,#95565,#95573,.T.); +#95573 = CIRCLE('',#95574,0.25); +#95574 = AXIS2_PLACEMENT_3D('',#95575,#95576,#95577); +#95575 = CARTESIAN_POINT('',(-1.4,1.9,0.76)); +#95576 = DIRECTION('',(0.,0.,1.)); +#95577 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#95578 = ORIENTED_EDGE('',*,*,#95564,.F.); +#95579 = ORIENTED_EDGE('',*,*,#94476,.T.); +#95580 = CYLINDRICAL_SURFACE('',#95581,0.25); +#95581 = AXIS2_PLACEMENT_3D('',#95582,#95583,#95584); +#95582 = CARTESIAN_POINT('',(-1.4,1.9,0.78)); +#95583 = DIRECTION('',(0.,0.,-1.)); +#95584 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#95585 = ADVANCED_FACE('',(#95586),#95589,.T.); +#95586 = FACE_BOUND('',#95587,.T.); +#95587 = EDGE_LOOP('',(#95588)); +#95588 = ORIENTED_EDGE('',*,*,#95572,.T.); +#95589 = PLANE('',#95590); +#95590 = AXIS2_PLACEMENT_3D('',#95591,#95592,#95593); +#95591 = CARTESIAN_POINT('',(-1.4,1.9,0.76)); +#95592 = DIRECTION('',(0.,0.,1.)); +#95593 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#95594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95598)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95595,#95596,#95597)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95595 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95596 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95597 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95598 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95595, + 'distance_accuracy_value','confusion accuracy'); +#95599 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95600,#95602); +#95600 = ( REPRESENTATION_RELATIONSHIP('','',#90423,#90400) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95601) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95601 = ITEM_DEFINED_TRANSFORMATION('','',#11,#90401); +#95602 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95603); +#95603 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('107','=>[0:1:1:49]','',#90395, + #90418,$); +#95604 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#90420)); +#95605 = SHAPE_DEFINITION_REPRESENTATION(#95606,#95612); +#95606 = PRODUCT_DEFINITION_SHAPE('','',#95607); +#95607 = PRODUCT_DEFINITION('design','',#95608,#95611); +#95608 = PRODUCT_DEFINITION_FORMATION('','',#95609); +#95609 = PRODUCT('TO-252-2','TO-252-2','',(#95610)); +#95610 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95611 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95612 = SHAPE_REPRESENTATION('',(#11,#95613),#95617); +#95613 = AXIS2_PLACEMENT_3D('',#95614,#95615,#95616); +#95614 = CARTESIAN_POINT('',(0.,0.,0.)); +#95615 = DIRECTION('',(0.,0.,1.)); +#95616 = DIRECTION('',(1.,0.,-0.)); +#95617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95621)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95618,#95619,#95620)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95618 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95619 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95620 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95621 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95618, + 'distance_accuracy_value','confusion accuracy'); +#95622 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95623,#95625); +#95623 = ( REPRESENTATION_RELATIONSHIP('','',#95612,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95624) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95624 = ITEM_DEFINED_TRANSFORMATION('','',#11,#351); +#95625 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95626); +#95626 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('117','Q10','',#5,#95607,$); +#95627 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95609)); +#95628 = SHAPE_DEFINITION_REPRESENTATION(#95629,#95635); +#95629 = PRODUCT_DEFINITION_SHAPE('','',#95630); +#95630 = PRODUCT_DEFINITION('design','',#95631,#95634); +#95631 = PRODUCT_DEFINITION_FORMATION('','',#95632); +#95632 = PRODUCT('CQ assembly','CQ assembly','',(#95633)); +#95633 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95634 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95635 = SHAPE_REPRESENTATION('',(#11,#95636),#95640); +#95636 = AXIS2_PLACEMENT_3D('',#95637,#95638,#95639); +#95637 = CARTESIAN_POINT('',(0.,0.,0.)); +#95638 = DIRECTION('',(0.,0.,1.)); +#95639 = DIRECTION('',(1.,0.,0.)); +#95640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95644)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95641,#95642,#95643)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95641 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95642 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95643 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95644 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95641, + 'distance_accuracy_value','confusion accuracy'); +#95645 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95646,#95648); +#95646 = ( REPRESENTATION_RELATIONSHIP('','',#95635,#95612) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95647) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95647 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95613); +#95648 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95649); +#95649 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('116','=>[0:1:1:51]','',#95607, + #95630,$); +#95650 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95632)); +#95651 = SHAPE_DEFINITION_REPRESENTATION(#95652,#95658); +#95652 = PRODUCT_DEFINITION_SHAPE('','',#95653); +#95653 = PRODUCT_DEFINITION('design','',#95654,#95657); +#95654 = PRODUCT_DEFINITION_FORMATION('','',#95655); +#95655 = PRODUCT('932d09b2-9c39-11ed-93f0-dde97e994e83', + '932d09b2-9c39-11ed-93f0-dde97e994e83','',(#95656)); +#95656 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95657 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95658 = SHAPE_REPRESENTATION('',(#11,#95659,#95663,#95667),#95671); +#95659 = AXIS2_PLACEMENT_3D('',#95660,#95661,#95662); +#95660 = CARTESIAN_POINT('',(0.,0.,0.)); +#95661 = DIRECTION('',(0.,0.,1.)); +#95662 = DIRECTION('',(1.,0.,0.)); +#95663 = AXIS2_PLACEMENT_3D('',#95664,#95665,#95666); +#95664 = CARTESIAN_POINT('',(0.,0.,0.)); +#95665 = DIRECTION('',(0.,0.,1.)); +#95666 = DIRECTION('',(1.,0.,0.)); +#95667 = AXIS2_PLACEMENT_3D('',#95668,#95669,#95670); +#95668 = CARTESIAN_POINT('',(0.,0.,0.)); +#95669 = DIRECTION('',(0.,0.,1.)); +#95670 = DIRECTION('',(1.,0.,0.)); +#95671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95675)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95672,#95673,#95674)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95672 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95673 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95674 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95675 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95672, + 'distance_accuracy_value','confusion accuracy'); +#95676 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95677,#95679); +#95677 = ( REPRESENTATION_RELATIONSHIP('','',#95658,#95635) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95678) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95678 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95636); +#95679 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95680); +#95680 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('115','7','',#95630,#95653,$); +#95681 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95655)); +#95682 = SHAPE_DEFINITION_REPRESENTATION(#95683,#95689); +#95683 = PRODUCT_DEFINITION_SHAPE('','',#95684); +#95684 = PRODUCT_DEFINITION('design','',#95685,#95688); +#95685 = PRODUCT_DEFINITION_FORMATION('','',#95686); +#95686 = PRODUCT('932d09b3-9c39-11ed-93f0-dde97e994e83', + '932d09b3-9c39-11ed-93f0-dde97e994e83','',(#95687)); +#95687 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95688 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95689 = SHAPE_REPRESENTATION('',(#11,#95690),#95694); +#95690 = AXIS2_PLACEMENT_3D('',#95691,#95692,#95693); +#95691 = CARTESIAN_POINT('',(0.,0.,0.)); +#95692 = DIRECTION('',(0.,0.,1.)); +#95693 = DIRECTION('',(1.,0.,0.)); +#95694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#95698)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#95695,#95696,#95697)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#95695 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#95696 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#95697 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#95698 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#95695, + 'distance_accuracy_value','confusion accuracy'); +#95699 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#95700,#95702); +#95700 = ( REPRESENTATION_RELATIONSHIP('','',#95689,#95658) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#95701) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#95701 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95659); +#95702 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #95703); +#95703 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('110','2','',#95653,#95684,$); +#95704 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95686)); +#95705 = SHAPE_DEFINITION_REPRESENTATION(#95706,#95712); +#95706 = PRODUCT_DEFINITION_SHAPE('','',#95707); +#95707 = PRODUCT_DEFINITION('design','',#95708,#95711); +#95708 = PRODUCT_DEFINITION_FORMATION('','',#95709); +#95709 = PRODUCT('932d09b3-9c39-11ed-93f0-dde97e994e83_part', + '932d09b3-9c39-11ed-93f0-dde97e994e83_part','',(#95710)); +#95710 = PRODUCT_CONTEXT('',#2,'mechanical'); +#95711 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#95712 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#95713),#96055); +#95713 = MANIFOLD_SOLID_BREP('',#95714); +#95714 = CLOSED_SHELL('',(#95715,#95755,#95802,#95826,#95857,#95897, + #95921,#95938,#95969,#95981,#96009,#96021,#96046)); +#95715 = ADVANCED_FACE('',(#95716),#95750,.F.); +#95716 = FACE_BOUND('',#95717,.F.); +#95717 = EDGE_LOOP('',(#95718,#95728,#95736,#95744)); +#95718 = ORIENTED_EDGE('',*,*,#95719,.T.); +#95719 = EDGE_CURVE('',#95720,#95722,#95724,.T.); +#95720 = VERTEX_POINT('',#95721); +#95721 = CARTESIAN_POINT('',(-3.11,3.25,0.9)); +#95722 = VERTEX_POINT('',#95723); +#95723 = CARTESIAN_POINT('',(-3.11,3.25,0.92)); +#95724 = LINE('',#95725,#95726); +#95725 = CARTESIAN_POINT('',(-3.11,3.25,2.E-02)); +#95726 = VECTOR('',#95727,1.); +#95727 = DIRECTION('',(0.,0.,1.)); +#95728 = ORIENTED_EDGE('',*,*,#95729,.T.); +#95729 = EDGE_CURVE('',#95722,#95730,#95732,.T.); +#95730 = VERTEX_POINT('',#95731); +#95731 = CARTESIAN_POINT('',(-3.11,-3.25,0.92)); +#95732 = LINE('',#95733,#95734); +#95733 = CARTESIAN_POINT('',(-3.11,3.25,0.92)); +#95734 = VECTOR('',#95735,1.); +#95735 = DIRECTION('',(0.,-1.,0.)); +#95736 = ORIENTED_EDGE('',*,*,#95737,.F.); +#95737 = EDGE_CURVE('',#95738,#95730,#95740,.T.); +#95738 = VERTEX_POINT('',#95739); +#95739 = CARTESIAN_POINT('',(-3.11,-3.25,0.9)); +#95740 = LINE('',#95741,#95742); +#95741 = CARTESIAN_POINT('',(-3.11,-3.25,2.E-02)); +#95742 = VECTOR('',#95743,1.); +#95743 = DIRECTION('',(0.,0.,1.)); +#95744 = ORIENTED_EDGE('',*,*,#95745,.F.); +#95745 = EDGE_CURVE('',#95720,#95738,#95746,.T.); +#95746 = LINE('',#95747,#95748); +#95747 = CARTESIAN_POINT('',(-3.11,3.25,0.9)); +#95748 = VECTOR('',#95749,1.); +#95749 = DIRECTION('',(0.,-1.,0.)); +#95750 = PLANE('',#95751); +#95751 = AXIS2_PLACEMENT_3D('',#95752,#95753,#95754); +#95752 = CARTESIAN_POINT('',(-3.11,3.25,2.E-02)); +#95753 = DIRECTION('',(1.,0.,-0.)); +#95754 = DIRECTION('',(0.,-1.,0.)); +#95755 = ADVANCED_FACE('',(#95756),#95797,.F.); +#95756 = FACE_BOUND('',#95757,.F.); +#95757 = EDGE_LOOP('',(#95758,#95759,#95767,#95775,#95783,#95791)); +#95758 = ORIENTED_EDGE('',*,*,#95719,.F.); +#95759 = ORIENTED_EDGE('',*,*,#95760,.T.); +#95760 = EDGE_CURVE('',#95720,#95761,#95763,.T.); +#95761 = VERTEX_POINT('',#95762); +#95762 = CARTESIAN_POINT('',(-2.91,3.25,2.E-02)); +#95763 = LINE('',#95764,#95765); +#95764 = CARTESIAN_POINT('',(-2.812161100196,3.25,-0.410491159136)); +#95765 = VECTOR('',#95766,1.); +#95766 = DIRECTION('',(0.221621103589,0.,-0.975132855791)); +#95767 = ORIENTED_EDGE('',*,*,#95768,.F.); +#95768 = EDGE_CURVE('',#95769,#95761,#95771,.T.); +#95769 = VERTEX_POINT('',#95770); +#95770 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95771 = LINE('',#95772,#95773); +#95772 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95773 = VECTOR('',#95774,1.); +#95774 = DIRECTION('',(-1.,0.,0.)); +#95775 = ORIENTED_EDGE('',*,*,#95776,.T.); +#95776 = EDGE_CURVE('',#95769,#95777,#95779,.T.); +#95777 = VERTEX_POINT('',#95778); +#95778 = CARTESIAN_POINT('',(3.11,3.25,0.52)); +#95779 = LINE('',#95780,#95781); +#95780 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95781 = VECTOR('',#95782,1.); +#95782 = DIRECTION('',(0.,0.,1.)); +#95783 = ORIENTED_EDGE('',*,*,#95784,.T.); +#95784 = EDGE_CURVE('',#95777,#95785,#95787,.T.); +#95785 = VERTEX_POINT('',#95786); +#95786 = CARTESIAN_POINT('',(2.998888888889,3.25,0.92)); +#95787 = LINE('',#95788,#95789); +#95788 = CARTESIAN_POINT('',(3.04946991404,3.25,0.737908309456)); +#95789 = VECTOR('',#95790,1.); +#95790 = DIRECTION('',(-0.267643863786,-0.,0.96351790963)); +#95791 = ORIENTED_EDGE('',*,*,#95792,.T.); +#95792 = EDGE_CURVE('',#95785,#95722,#95793,.T.); +#95793 = LINE('',#95794,#95795); +#95794 = CARTESIAN_POINT('',(2.61,3.25,0.92)); +#95795 = VECTOR('',#95796,1.); +#95796 = DIRECTION('',(-1.,0.,0.)); +#95797 = PLANE('',#95798); +#95798 = AXIS2_PLACEMENT_3D('',#95799,#95800,#95801); +#95799 = CARTESIAN_POINT('',(3.11,3.25,2.E-02)); +#95800 = DIRECTION('',(0.,-1.,0.)); +#95801 = DIRECTION('',(-1.,0.,0.)); +#95802 = ADVANCED_FACE('',(#95803),#95821,.T.); +#95803 = FACE_BOUND('',#95804,.F.); +#95804 = EDGE_LOOP('',(#95805,#95806,#95807,#95815)); +#95805 = ORIENTED_EDGE('',*,*,#95760,.F.); +#95806 = ORIENTED_EDGE('',*,*,#95745,.T.); +#95807 = ORIENTED_EDGE('',*,*,#95808,.T.); +#95808 = EDGE_CURVE('',#95738,#95809,#95811,.T.); +#95809 = VERTEX_POINT('',#95810); +#95810 = CARTESIAN_POINT('',(-2.91,-3.25,2.E-02)); +#95811 = LINE('',#95812,#95813); +#95812 = CARTESIAN_POINT('',(-2.964911591356,-3.25,0.261611001965)); +#95813 = VECTOR('',#95814,1.); +#95814 = DIRECTION('',(0.221621103589,-0.,-0.975132855791)); +#95815 = ORIENTED_EDGE('',*,*,#95816,.F.); +#95816 = EDGE_CURVE('',#95761,#95809,#95817,.T.); +#95817 = LINE('',#95818,#95819); +#95818 = CARTESIAN_POINT('',(-2.91,3.25,2.E-02)); +#95819 = VECTOR('',#95820,1.); +#95820 = DIRECTION('',(0.,-1.,0.)); +#95821 = PLANE('',#95822); +#95822 = AXIS2_PLACEMENT_3D('',#95823,#95824,#95825); +#95823 = CARTESIAN_POINT('',(-3.01,3.25,0.46)); +#95824 = DIRECTION('',(-0.975132855791,0.,-0.221621103589)); +#95825 = DIRECTION('',(0.,1.,0.)); +#95826 = ADVANCED_FACE('',(#95827),#95852,.F.); +#95827 = FACE_BOUND('',#95828,.F.); +#95828 = EDGE_LOOP('',(#95829,#95839,#95845,#95846)); +#95829 = ORIENTED_EDGE('',*,*,#95830,.T.); +#95830 = EDGE_CURVE('',#95831,#95833,#95835,.T.); +#95831 = VERTEX_POINT('',#95832); +#95832 = CARTESIAN_POINT('',(-2.61,2.75,2.32)); +#95833 = VERTEX_POINT('',#95834); +#95834 = CARTESIAN_POINT('',(-2.61,-2.75,2.32)); +#95835 = LINE('',#95836,#95837); +#95836 = CARTESIAN_POINT('',(-2.61,3.25,2.32)); +#95837 = VECTOR('',#95838,1.); +#95838 = DIRECTION('',(0.,-1.,0.)); +#95839 = ORIENTED_EDGE('',*,*,#95840,.T.); +#95840 = EDGE_CURVE('',#95833,#95730,#95841,.T.); +#95841 = LINE('',#95842,#95843); +#95842 = CARTESIAN_POINT('',(-2.529715447154,-2.669715447154, + 2.544796747967)); +#95843 = VECTOR('',#95844,1.); +#95844 = DIRECTION('',(-0.318788356532,-0.318788356532,-0.892607398289) + ); +#95845 = ORIENTED_EDGE('',*,*,#95729,.F.); +#95846 = ORIENTED_EDGE('',*,*,#95847,.F.); +#95847 = EDGE_CURVE('',#95831,#95722,#95848,.T.); +#95848 = LINE('',#95849,#95850); +#95849 = CARTESIAN_POINT('',(-2.594756097561,2.734756097561, + 2.362682926829)); +#95850 = VECTOR('',#95851,1.); +#95851 = DIRECTION('',(-0.318788356532,0.318788356532,-0.892607398289)); +#95852 = PLANE('',#95853); +#95853 = AXIS2_PLACEMENT_3D('',#95854,#95855,#95856); +#95854 = CARTESIAN_POINT('',(-2.86,3.25,1.62)); +#95855 = DIRECTION('',(0.941741911595,7.015149670815E-18,-0.336336396998 + )); +#95856 = DIRECTION('',(6.606460461117E-18,-1.,-2.359450164685E-18)); +#95857 = ADVANCED_FACE('',(#95858),#95892,.F.); +#95858 = FACE_BOUND('',#95859,.F.); +#95859 = EDGE_LOOP('',(#95860,#95861,#95869,#95877,#95885,#95891)); +#95860 = ORIENTED_EDGE('',*,*,#95737,.T.); +#95861 = ORIENTED_EDGE('',*,*,#95862,.T.); +#95862 = EDGE_CURVE('',#95730,#95863,#95865,.T.); +#95863 = VERTEX_POINT('',#95864); +#95864 = CARTESIAN_POINT('',(2.998888888889,-3.25,0.92)); +#95865 = LINE('',#95866,#95867); +#95866 = CARTESIAN_POINT('',(-2.61,-3.25,0.92)); +#95867 = VECTOR('',#95868,1.); +#95868 = DIRECTION('',(1.,0.,0.)); +#95869 = ORIENTED_EDGE('',*,*,#95870,.F.); +#95870 = EDGE_CURVE('',#95871,#95863,#95873,.T.); +#95871 = VERTEX_POINT('',#95872); +#95872 = CARTESIAN_POINT('',(3.11,-3.25,0.52)); +#95873 = LINE('',#95874,#95875); +#95874 = CARTESIAN_POINT('',(2.826690544413,-3.25,1.539914040115)); +#95875 = VECTOR('',#95876,1.); +#95876 = DIRECTION('',(-0.267643863786,0.,0.96351790963)); +#95877 = ORIENTED_EDGE('',*,*,#95878,.F.); +#95878 = EDGE_CURVE('',#95879,#95871,#95881,.T.); +#95879 = VERTEX_POINT('',#95880); +#95880 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95881 = LINE('',#95882,#95883); +#95882 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95883 = VECTOR('',#95884,1.); +#95884 = DIRECTION('',(0.,0.,1.)); +#95885 = ORIENTED_EDGE('',*,*,#95886,.F.); +#95886 = EDGE_CURVE('',#95809,#95879,#95887,.T.); +#95887 = LINE('',#95888,#95889); +#95888 = CARTESIAN_POINT('',(-3.11,-3.25,2.E-02)); +#95889 = VECTOR('',#95890,1.); +#95890 = DIRECTION('',(1.,0.,0.)); +#95891 = ORIENTED_EDGE('',*,*,#95808,.F.); +#95892 = PLANE('',#95893); +#95893 = AXIS2_PLACEMENT_3D('',#95894,#95895,#95896); +#95894 = CARTESIAN_POINT('',(-3.11,-3.25,2.E-02)); +#95895 = DIRECTION('',(0.,1.,0.)); +#95896 = DIRECTION('',(1.,0.,0.)); +#95897 = ADVANCED_FACE('',(#95898),#95916,.F.); +#95898 = FACE_BOUND('',#95899,.F.); +#95899 = EDGE_LOOP('',(#95900,#95908,#95914,#95915)); +#95900 = ORIENTED_EDGE('',*,*,#95901,.F.); +#95901 = EDGE_CURVE('',#95902,#95785,#95904,.T.); +#95902 = VERTEX_POINT('',#95903); +#95903 = CARTESIAN_POINT('',(2.61,2.75,2.32)); +#95904 = LINE('',#95905,#95906); +#95905 = CARTESIAN_POINT('',(2.56571473387,2.69306180069,2.479426958068) + ); +#95906 = VECTOR('',#95907,1.); +#95907 = DIRECTION('',(0.253078917766,0.325387179985,-0.911084103957)); +#95908 = ORIENTED_EDGE('',*,*,#95909,.T.); +#95909 = EDGE_CURVE('',#95902,#95831,#95910,.T.); +#95910 = LINE('',#95911,#95912); +#95911 = CARTESIAN_POINT('',(2.61,2.75,2.32)); +#95912 = VECTOR('',#95913,1.); +#95913 = DIRECTION('',(-1.,0.,0.)); +#95914 = ORIENTED_EDGE('',*,*,#95847,.T.); +#95915 = ORIENTED_EDGE('',*,*,#95792,.F.); +#95916 = PLANE('',#95917); +#95917 = AXIS2_PLACEMENT_3D('',#95918,#95919,#95920); +#95918 = CARTESIAN_POINT('',(2.61,3.,1.62)); +#95919 = DIRECTION('',(7.015149670815E-18,-0.941741911595, + -0.336336396998)); +#95920 = DIRECTION('',(-1.,-6.606460461117E-18,-2.359450164685E-18)); +#95921 = ADVANCED_FACE('',(#95922),#95933,.F.); +#95922 = FACE_BOUND('',#95923,.F.); +#95923 = EDGE_LOOP('',(#95924,#95925,#95931,#95932)); +#95924 = ORIENTED_EDGE('',*,*,#95886,.T.); +#95925 = ORIENTED_EDGE('',*,*,#95926,.T.); +#95926 = EDGE_CURVE('',#95879,#95769,#95927,.T.); +#95927 = LINE('',#95928,#95929); +#95928 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95929 = VECTOR('',#95930,1.); +#95930 = DIRECTION('',(0.,1.,0.)); +#95931 = ORIENTED_EDGE('',*,*,#95768,.T.); +#95932 = ORIENTED_EDGE('',*,*,#95816,.T.); +#95933 = PLANE('',#95934); +#95934 = AXIS2_PLACEMENT_3D('',#95935,#95936,#95937); +#95935 = CARTESIAN_POINT('',(-1.396506949214E-16,0.,2.E-02)); +#95936 = DIRECTION('',(4.070108102062E-35,-3.727005214102E-35,1.)); +#95937 = DIRECTION('',(1.,0.,-4.070108102062E-35)); +#95938 = ADVANCED_FACE('',(#95939),#95964,.F.); +#95939 = FACE_BOUND('',#95940,.T.); +#95940 = EDGE_LOOP('',(#95941,#95949,#95955,#95956,#95962,#95963)); +#95941 = ORIENTED_EDGE('',*,*,#95942,.F.); +#95942 = EDGE_CURVE('',#95943,#95902,#95945,.T.); +#95943 = VERTEX_POINT('',#95944); +#95944 = CARTESIAN_POINT('',(2.61,-2.75,2.32)); +#95945 = LINE('',#95946,#95947); +#95946 = CARTESIAN_POINT('',(2.61,-3.25,2.32)); +#95947 = VECTOR('',#95948,1.); +#95948 = DIRECTION('',(0.,1.,0.)); +#95949 = ORIENTED_EDGE('',*,*,#95950,.T.); +#95950 = EDGE_CURVE('',#95943,#95863,#95951,.T.); +#95951 = LINE('',#95952,#95953); +#95952 = CARTESIAN_POINT('',(2.666180069016,-2.822231517306, + 2.117751751542)); +#95953 = VECTOR('',#95954,1.); +#95954 = DIRECTION('',(0.253078917766,-0.325387179985,-0.911084103957)); +#95955 = ORIENTED_EDGE('',*,*,#95870,.F.); +#95956 = ORIENTED_EDGE('',*,*,#95957,.T.); +#95957 = EDGE_CURVE('',#95871,#95777,#95958,.T.); +#95958 = LINE('',#95959,#95960); +#95959 = CARTESIAN_POINT('',(3.11,-3.25,0.52)); +#95960 = VECTOR('',#95961,1.); +#95961 = DIRECTION('',(0.,1.,0.)); +#95962 = ORIENTED_EDGE('',*,*,#95784,.T.); +#95963 = ORIENTED_EDGE('',*,*,#95901,.F.); +#95964 = PLANE('',#95965); +#95965 = AXIS2_PLACEMENT_3D('',#95966,#95967,#95968); +#95966 = CARTESIAN_POINT('',(2.86,-3.25,1.42)); +#95967 = DIRECTION('',(-0.96351790963,0.,-0.267643863786)); +#95968 = DIRECTION('',(0.,-1.,-0.)); +#95969 = ADVANCED_FACE('',(#95970),#95976,.F.); +#95970 = FACE_BOUND('',#95971,.F.); +#95971 = EDGE_LOOP('',(#95972,#95973,#95974,#95975)); +#95972 = ORIENTED_EDGE('',*,*,#95878,.T.); +#95973 = ORIENTED_EDGE('',*,*,#95957,.T.); +#95974 = ORIENTED_EDGE('',*,*,#95776,.F.); +#95975 = ORIENTED_EDGE('',*,*,#95926,.F.); +#95976 = PLANE('',#95977); +#95977 = AXIS2_PLACEMENT_3D('',#95978,#95979,#95980); +#95978 = CARTESIAN_POINT('',(3.11,-3.25,2.E-02)); +#95979 = DIRECTION('',(-1.,0.,0.)); +#95980 = DIRECTION('',(0.,1.,0.)); +#95981 = ADVANCED_FACE('',(#95982,#95993),#96004,.T.); +#95982 = FACE_BOUND('',#95983,.T.); +#95983 = EDGE_LOOP('',(#95984,#95985,#95991,#95992)); +#95984 = ORIENTED_EDGE('',*,*,#95830,.T.); +#95985 = ORIENTED_EDGE('',*,*,#95986,.T.); +#95986 = EDGE_CURVE('',#95833,#95943,#95987,.T.); +#95987 = LINE('',#95988,#95989); +#95988 = CARTESIAN_POINT('',(-2.61,-2.75,2.32)); +#95989 = VECTOR('',#95990,1.); +#95990 = DIRECTION('',(1.,0.,0.)); +#95991 = ORIENTED_EDGE('',*,*,#95942,.T.); +#95992 = ORIENTED_EDGE('',*,*,#95909,.T.); +#95993 = FACE_BOUND('',#95994,.T.); +#95994 = EDGE_LOOP('',(#95995)); +#95995 = ORIENTED_EDGE('',*,*,#95996,.T.); +#95996 = EDGE_CURVE('',#95997,#95997,#95999,.T.); +#95997 = VERTEX_POINT('',#95998); +#95998 = CARTESIAN_POINT('',(-2.,-1.118303597555E-16,2.32)); +#95999 = CIRCLE('',#96000,0.5); +#96000 = AXIS2_PLACEMENT_3D('',#96001,#96002,#96003); +#96001 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.32)); +#96002 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96003 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96004 = PLANE('',#96005); +#96005 = AXIS2_PLACEMENT_3D('',#96006,#96007,#96008); +#96006 = CARTESIAN_POINT('',(-1.396506949214E-16,0.,2.32)); +#96007 = DIRECTION('',(4.070108102062E-35,-3.727005214102E-35,1.)); +#96008 = DIRECTION('',(1.,0.,-4.070108102062E-35)); +#96009 = ADVANCED_FACE('',(#96010),#96016,.F.); +#96010 = FACE_BOUND('',#96011,.F.); +#96011 = EDGE_LOOP('',(#96012,#96013,#96014,#96015)); +#96012 = ORIENTED_EDGE('',*,*,#95840,.F.); +#96013 = ORIENTED_EDGE('',*,*,#95986,.T.); +#96014 = ORIENTED_EDGE('',*,*,#95950,.T.); +#96015 = ORIENTED_EDGE('',*,*,#95862,.F.); +#96016 = PLANE('',#96017); +#96017 = AXIS2_PLACEMENT_3D('',#96018,#96019,#96020); +#96018 = CARTESIAN_POINT('',(-2.61,-3.,1.62)); +#96019 = DIRECTION('',(-7.015149670815E-18,0.941741911595, + -0.336336396998)); +#96020 = DIRECTION('',(1.,6.606460461117E-18,-2.359450164685E-18)); +#96021 = ADVANCED_FACE('',(#96022),#96041,.F.); +#96022 = FACE_BOUND('',#96023,.F.); +#96023 = EDGE_LOOP('',(#96024,#96033,#96039,#96040)); +#96024 = ORIENTED_EDGE('',*,*,#96025,.F.); +#96025 = EDGE_CURVE('',#96026,#96026,#96028,.T.); +#96026 = VERTEX_POINT('',#96027); +#96027 = CARTESIAN_POINT('',(-2.,-1.118303597555E-16,2.22)); +#96028 = CIRCLE('',#96029,0.5); +#96029 = AXIS2_PLACEMENT_3D('',#96030,#96031,#96032); +#96030 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.22)); +#96031 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96032 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96033 = ORIENTED_EDGE('',*,*,#96034,.F.); +#96034 = EDGE_CURVE('',#95997,#96026,#96035,.T.); +#96035 = LINE('',#96036,#96037); +#96036 = CARTESIAN_POINT('',(-2.,-1.118303597555E-16,2.32)); +#96037 = VECTOR('',#96038,1.); +#96038 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96039 = ORIENTED_EDGE('',*,*,#95996,.T.); +#96040 = ORIENTED_EDGE('',*,*,#96034,.T.); +#96041 = CYLINDRICAL_SURFACE('',#96042,0.5); +#96042 = AXIS2_PLACEMENT_3D('',#96043,#96044,#96045); +#96043 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.32)); +#96044 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96045 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96046 = ADVANCED_FACE('',(#96047),#96050,.F.); +#96047 = FACE_BOUND('',#96048,.F.); +#96048 = EDGE_LOOP('',(#96049)); +#96049 = ORIENTED_EDGE('',*,*,#96025,.T.); +#96050 = PLANE('',#96051); +#96051 = AXIS2_PLACEMENT_3D('',#96052,#96053,#96054); +#96052 = CARTESIAN_POINT('',(-1.5,1.063432015924E-17,2.22)); +#96053 = DIRECTION('',(-4.070108102062E-35,3.727005214102E-35,-1.)); +#96054 = DIRECTION('',(-1.,-1.516931411834E-69,4.070108102062E-35)); +#96055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96059)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96056,#96057,#96058)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96056 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96057 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96058 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96059 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96056, + 'distance_accuracy_value','confusion accuracy'); +#96060 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96061,#96063); +#96061 = ( REPRESENTATION_RELATIONSHIP('','',#95712,#95689) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96062) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96062 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95690); +#96063 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96064); +#96064 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('109','1','',#95684,#95707,$); +#96065 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#95709)); +#96066 = SHAPE_DEFINITION_REPRESENTATION(#96067,#96073); +#96067 = PRODUCT_DEFINITION_SHAPE('','',#96068); +#96068 = PRODUCT_DEFINITION('design','',#96069,#96072); +#96069 = PRODUCT_DEFINITION_FORMATION('','',#96070); +#96070 = PRODUCT('932d09b4-9c39-11ed-93f0-dde97e994e83', + '932d09b4-9c39-11ed-93f0-dde97e994e83','',(#96071)); +#96071 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96072 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96073 = SHAPE_REPRESENTATION('',(#11,#96074),#96078); +#96074 = AXIS2_PLACEMENT_3D('',#96075,#96076,#96077); +#96075 = CARTESIAN_POINT('',(0.,0.,0.)); +#96076 = DIRECTION('',(0.,0.,1.)); +#96077 = DIRECTION('',(1.,0.,0.)); +#96078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96082)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96079,#96080,#96081)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96079 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96080 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96081 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96082 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96079, + 'distance_accuracy_value','confusion accuracy'); +#96083 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96084,#96086); +#96084 = ( REPRESENTATION_RELATIONSHIP('','',#96073,#95658) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96085) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96085 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95663); +#96086 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96087); +#96087 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('112','4','',#95653,#96068,$); +#96088 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96070)); +#96089 = SHAPE_DEFINITION_REPRESENTATION(#96090,#96096); +#96090 = PRODUCT_DEFINITION_SHAPE('','',#96091); +#96091 = PRODUCT_DEFINITION('design','',#96092,#96095); +#96092 = PRODUCT_DEFINITION_FORMATION('','',#96093); +#96093 = PRODUCT('932d09b4-9c39-11ed-93f0-dde97e994e83_part', + '932d09b4-9c39-11ed-93f0-dde97e994e83_part','',(#96094)); +#96094 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96095 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96096 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#96097),#96585); +#96097 = MANIFOLD_SOLID_BREP('',#96098); +#96098 = CLOSED_SHELL('',(#96099,#96139,#96172,#96279,#96304,#96403, + #96420,#96437,#96454,#96471,#96488,#96505,#96522,#96539,#96556, + #96573)); +#96099 = ADVANCED_FACE('',(#96100),#96134,.T.); +#96100 = FACE_BOUND('',#96101,.T.); +#96101 = EDGE_LOOP('',(#96102,#96112,#96120,#96128)); +#96102 = ORIENTED_EDGE('',*,*,#96103,.F.); +#96103 = EDGE_CURVE('',#96104,#96106,#96108,.T.); +#96104 = VERTEX_POINT('',#96105); +#96105 = CARTESIAN_POINT('',(4.11,-2.66,0.)); +#96106 = VERTEX_POINT('',#96107); +#96107 = CARTESIAN_POINT('',(4.11,-2.66,0.5)); +#96108 = LINE('',#96109,#96110); +#96109 = CARTESIAN_POINT('',(4.11,-2.66,0.)); +#96110 = VECTOR('',#96111,1.); +#96111 = DIRECTION('',(0.,0.,1.)); +#96112 = ORIENTED_EDGE('',*,*,#96113,.T.); +#96113 = EDGE_CURVE('',#96104,#96114,#96116,.T.); +#96114 = VERTEX_POINT('',#96115); +#96115 = CARTESIAN_POINT('',(4.11,-1.97,0.)); +#96116 = LINE('',#96117,#96118); +#96117 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96118 = VECTOR('',#96119,1.); +#96119 = DIRECTION('',(0.,1.,0.)); +#96120 = ORIENTED_EDGE('',*,*,#96121,.F.); +#96121 = EDGE_CURVE('',#96122,#96114,#96124,.T.); +#96122 = VERTEX_POINT('',#96123); +#96123 = CARTESIAN_POINT('',(4.11,-1.97,0.5)); +#96124 = LINE('',#96125,#96126); +#96125 = CARTESIAN_POINT('',(4.11,-1.97,0.)); +#96126 = VECTOR('',#96127,1.); +#96127 = DIRECTION('',(-0.,-0.,-1.)); +#96128 = ORIENTED_EDGE('',*,*,#96129,.T.); +#96129 = EDGE_CURVE('',#96122,#96106,#96130,.T.); +#96130 = LINE('',#96131,#96132); +#96131 = CARTESIAN_POINT('',(4.11,2.7,0.5)); +#96132 = VECTOR('',#96133,1.); +#96133 = DIRECTION('',(0.,-1.,0.)); +#96134 = PLANE('',#96135); +#96135 = AXIS2_PLACEMENT_3D('',#96136,#96137,#96138); +#96136 = CARTESIAN_POINT('',(4.11,0.,0.)); +#96137 = DIRECTION('',(1.,0.,-0.)); +#96138 = DIRECTION('',(0.,-1.,0.)); +#96139 = ADVANCED_FACE('',(#96140),#96167,.T.); +#96140 = FACE_BOUND('',#96141,.T.); +#96141 = EDGE_LOOP('',(#96142,#96143,#96152,#96160)); +#96142 = ORIENTED_EDGE('',*,*,#96103,.T.); +#96143 = ORIENTED_EDGE('',*,*,#96144,.T.); +#96144 = EDGE_CURVE('',#96106,#96145,#96147,.T.); +#96145 = VERTEX_POINT('',#96146); +#96146 = CARTESIAN_POINT('',(4.07,-2.7,0.5)); +#96147 = CIRCLE('',#96148,4.E-02); +#96148 = AXIS2_PLACEMENT_3D('',#96149,#96150,#96151); +#96149 = CARTESIAN_POINT('',(4.07,-2.66,0.5)); +#96150 = DIRECTION('',(-0.,-0.,-1.)); +#96151 = DIRECTION('',(0.,-1.,0.)); +#96152 = ORIENTED_EDGE('',*,*,#96153,.F.); +#96153 = EDGE_CURVE('',#96154,#96145,#96156,.T.); +#96154 = VERTEX_POINT('',#96155); +#96155 = CARTESIAN_POINT('',(4.07,-2.7,0.)); +#96156 = LINE('',#96157,#96158); +#96157 = CARTESIAN_POINT('',(4.07,-2.7,0.)); +#96158 = VECTOR('',#96159,1.); +#96159 = DIRECTION('',(0.,0.,1.)); +#96160 = ORIENTED_EDGE('',*,*,#96161,.F.); +#96161 = EDGE_CURVE('',#96104,#96154,#96162,.T.); +#96162 = CIRCLE('',#96163,4.E-02); +#96163 = AXIS2_PLACEMENT_3D('',#96164,#96165,#96166); +#96164 = CARTESIAN_POINT('',(4.07,-2.66,0.)); +#96165 = DIRECTION('',(-0.,-0.,-1.)); +#96166 = DIRECTION('',(0.,-1.,0.)); +#96167 = CYLINDRICAL_SURFACE('',#96168,4.E-02); +#96168 = AXIS2_PLACEMENT_3D('',#96169,#96170,#96171); +#96169 = CARTESIAN_POINT('',(4.07,-2.66,0.)); +#96170 = DIRECTION('',(0.,0.,1.)); +#96171 = DIRECTION('',(1.,0.,-0.)); +#96172 = ADVANCED_FACE('',(#96173),#96274,.F.); +#96173 = FACE_BOUND('',#96174,.F.); +#96174 = EDGE_LOOP('',(#96175,#96176,#96184,#96192,#96200,#96208,#96216, + #96224,#96232,#96241,#96249,#96258,#96266,#96273)); +#96175 = ORIENTED_EDGE('',*,*,#96144,.T.); +#96176 = ORIENTED_EDGE('',*,*,#96177,.T.); +#96177 = EDGE_CURVE('',#96145,#96178,#96180,.T.); +#96178 = VERTEX_POINT('',#96179); +#96179 = CARTESIAN_POINT('',(3.11,-2.7,0.5)); +#96180 = LINE('',#96181,#96182); +#96181 = CARTESIAN_POINT('',(4.11,-2.7,0.5)); +#96182 = VECTOR('',#96183,1.); +#96183 = DIRECTION('',(-1.,0.,0.)); +#96184 = ORIENTED_EDGE('',*,*,#96185,.T.); +#96185 = EDGE_CURVE('',#96178,#96186,#96188,.T.); +#96186 = VERTEX_POINT('',#96187); +#96187 = CARTESIAN_POINT('',(3.11,-2.16,0.5)); +#96188 = LINE('',#96189,#96190); +#96189 = CARTESIAN_POINT('',(3.11,-2.7,0.5)); +#96190 = VECTOR('',#96191,1.); +#96191 = DIRECTION('',(0.,1.,0.)); +#96192 = ORIENTED_EDGE('',*,*,#96193,.T.); +#96193 = EDGE_CURVE('',#96186,#96194,#96196,.T.); +#96194 = VERTEX_POINT('',#96195); +#96195 = CARTESIAN_POINT('',(-1.13,-2.16,0.5)); +#96196 = LINE('',#96197,#96198); +#96197 = CARTESIAN_POINT('',(3.11,-2.16,0.5)); +#96198 = VECTOR('',#96199,1.); +#96199 = DIRECTION('',(-1.,0.,0.)); +#96200 = ORIENTED_EDGE('',*,*,#96201,.T.); +#96201 = EDGE_CURVE('',#96194,#96202,#96204,.T.); +#96202 = VERTEX_POINT('',#96203); +#96203 = CARTESIAN_POINT('',(-1.13,2.16,0.5)); +#96204 = LINE('',#96205,#96206); +#96205 = CARTESIAN_POINT('',(-1.13,-2.16,0.5)); +#96206 = VECTOR('',#96207,1.); +#96207 = DIRECTION('',(0.,1.,0.)); +#96208 = ORIENTED_EDGE('',*,*,#96209,.T.); +#96209 = EDGE_CURVE('',#96202,#96210,#96212,.T.); +#96210 = VERTEX_POINT('',#96211); +#96211 = CARTESIAN_POINT('',(3.11,2.16,0.5)); +#96212 = LINE('',#96213,#96214); +#96213 = CARTESIAN_POINT('',(-1.13,2.16,0.5)); +#96214 = VECTOR('',#96215,1.); +#96215 = DIRECTION('',(1.,0.,0.)); +#96216 = ORIENTED_EDGE('',*,*,#96217,.T.); +#96217 = EDGE_CURVE('',#96210,#96218,#96220,.T.); +#96218 = VERTEX_POINT('',#96219); +#96219 = CARTESIAN_POINT('',(3.11,2.7,0.5)); +#96220 = LINE('',#96221,#96222); +#96221 = CARTESIAN_POINT('',(3.11,2.16,0.5)); +#96222 = VECTOR('',#96223,1.); +#96223 = DIRECTION('',(0.,1.,0.)); +#96224 = ORIENTED_EDGE('',*,*,#96225,.T.); +#96225 = EDGE_CURVE('',#96218,#96226,#96228,.T.); +#96226 = VERTEX_POINT('',#96227); +#96227 = CARTESIAN_POINT('',(4.07,2.7,0.5)); +#96228 = LINE('',#96229,#96230); +#96229 = CARTESIAN_POINT('',(3.11,2.7,0.5)); +#96230 = VECTOR('',#96231,1.); +#96231 = DIRECTION('',(1.,0.,0.)); +#96232 = ORIENTED_EDGE('',*,*,#96233,.F.); +#96233 = EDGE_CURVE('',#96234,#96226,#96236,.T.); +#96234 = VERTEX_POINT('',#96235); +#96235 = CARTESIAN_POINT('',(4.11,2.66,0.5)); +#96236 = CIRCLE('',#96237,4.E-02); +#96237 = AXIS2_PLACEMENT_3D('',#96238,#96239,#96240); +#96238 = CARTESIAN_POINT('',(4.07,2.66,0.5)); +#96239 = DIRECTION('',(0.,0.,1.)); +#96240 = DIRECTION('',(0.,-1.,0.)); +#96241 = ORIENTED_EDGE('',*,*,#96242,.T.); +#96242 = EDGE_CURVE('',#96234,#96243,#96245,.T.); +#96243 = VERTEX_POINT('',#96244); +#96244 = CARTESIAN_POINT('',(4.11,1.97,0.5)); +#96245 = LINE('',#96246,#96247); +#96246 = CARTESIAN_POINT('',(4.11,2.7,0.5)); +#96247 = VECTOR('',#96248,1.); +#96248 = DIRECTION('',(0.,-1.,0.)); +#96249 = ORIENTED_EDGE('',*,*,#96250,.F.); +#96250 = EDGE_CURVE('',#96251,#96243,#96253,.T.); +#96251 = VERTEX_POINT('',#96252); +#96252 = CARTESIAN_POINT('',(4.03,1.89,0.5)); +#96253 = CIRCLE('',#96254,8.E-02); +#96254 = AXIS2_PLACEMENT_3D('',#96255,#96256,#96257); +#96255 = CARTESIAN_POINT('',(4.11,1.89,0.5)); +#96256 = DIRECTION('',(0.,0.,-1.)); +#96257 = DIRECTION('',(1.,0.,0.)); +#96258 = ORIENTED_EDGE('',*,*,#96259,.T.); +#96259 = EDGE_CURVE('',#96251,#96260,#96262,.T.); +#96260 = VERTEX_POINT('',#96261); +#96261 = CARTESIAN_POINT('',(4.03,-1.89,0.5)); +#96262 = LINE('',#96263,#96264); +#96263 = CARTESIAN_POINT('',(4.03,1.89,0.5)); +#96264 = VECTOR('',#96265,1.); +#96265 = DIRECTION('',(0.,-1.,0.)); +#96266 = ORIENTED_EDGE('',*,*,#96267,.F.); +#96267 = EDGE_CURVE('',#96122,#96260,#96268,.T.); +#96268 = CIRCLE('',#96269,8.E-02); +#96269 = AXIS2_PLACEMENT_3D('',#96270,#96271,#96272); +#96270 = CARTESIAN_POINT('',(4.11,-1.89,0.5)); +#96271 = DIRECTION('',(0.,0.,-1.)); +#96272 = DIRECTION('',(1.,0.,0.)); +#96273 = ORIENTED_EDGE('',*,*,#96129,.T.); +#96274 = PLANE('',#96275); +#96275 = AXIS2_PLACEMENT_3D('',#96276,#96277,#96278); +#96276 = CARTESIAN_POINT('',(1.705187969925,6.260656153901E-17,0.5)); +#96277 = DIRECTION('',(-0.,-0.,-1.)); +#96278 = DIRECTION('',(-1.,0.,0.)); +#96279 = ADVANCED_FACE('',(#96280),#96299,.F.); +#96280 = FACE_BOUND('',#96281,.F.); +#96281 = EDGE_LOOP('',(#96282,#96283,#96291,#96298)); +#96282 = ORIENTED_EDGE('',*,*,#96267,.T.); +#96283 = ORIENTED_EDGE('',*,*,#96284,.F.); +#96284 = EDGE_CURVE('',#96285,#96260,#96287,.T.); +#96285 = VERTEX_POINT('',#96286); +#96286 = CARTESIAN_POINT('',(4.03,-1.89,0.)); +#96287 = LINE('',#96288,#96289); +#96288 = CARTESIAN_POINT('',(4.03,-1.89,0.)); +#96289 = VECTOR('',#96290,1.); +#96290 = DIRECTION('',(0.,0.,1.)); +#96291 = ORIENTED_EDGE('',*,*,#96292,.T.); +#96292 = EDGE_CURVE('',#96285,#96114,#96293,.T.); +#96293 = CIRCLE('',#96294,8.E-02); +#96294 = AXIS2_PLACEMENT_3D('',#96295,#96296,#96297); +#96295 = CARTESIAN_POINT('',(4.11,-1.89,0.)); +#96296 = DIRECTION('',(0.,0.,1.)); +#96297 = DIRECTION('',(1.,0.,-0.)); +#96298 = ORIENTED_EDGE('',*,*,#96121,.F.); +#96299 = CYLINDRICAL_SURFACE('',#96300,8.E-02); +#96300 = AXIS2_PLACEMENT_3D('',#96301,#96302,#96303); +#96301 = CARTESIAN_POINT('',(4.11,-1.89,0.)); +#96302 = DIRECTION('',(-0.,-0.,-1.)); +#96303 = DIRECTION('',(1.,0.,0.)); +#96304 = ADVANCED_FACE('',(#96305),#96398,.T.); +#96305 = FACE_BOUND('',#96306,.T.); +#96306 = EDGE_LOOP('',(#96307,#96308,#96309,#96317,#96325,#96333,#96341, + #96349,#96357,#96365,#96374,#96382,#96391,#96397)); +#96307 = ORIENTED_EDGE('',*,*,#96113,.F.); +#96308 = ORIENTED_EDGE('',*,*,#96161,.T.); +#96309 = ORIENTED_EDGE('',*,*,#96310,.T.); +#96310 = EDGE_CURVE('',#96154,#96311,#96313,.T.); +#96311 = VERTEX_POINT('',#96312); +#96312 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96313 = LINE('',#96314,#96315); +#96314 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96315 = VECTOR('',#96316,1.); +#96316 = DIRECTION('',(-1.,0.,0.)); +#96317 = ORIENTED_EDGE('',*,*,#96318,.T.); +#96318 = EDGE_CURVE('',#96311,#96319,#96321,.T.); +#96319 = VERTEX_POINT('',#96320); +#96320 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96321 = LINE('',#96322,#96323); +#96322 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96323 = VECTOR('',#96324,1.); +#96324 = DIRECTION('',(0.,1.,0.)); +#96325 = ORIENTED_EDGE('',*,*,#96326,.T.); +#96326 = EDGE_CURVE('',#96319,#96327,#96329,.T.); +#96327 = VERTEX_POINT('',#96328); +#96328 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96329 = LINE('',#96330,#96331); +#96330 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96331 = VECTOR('',#96332,1.); +#96332 = DIRECTION('',(-1.,0.,0.)); +#96333 = ORIENTED_EDGE('',*,*,#96334,.T.); +#96334 = EDGE_CURVE('',#96327,#96335,#96337,.T.); +#96335 = VERTEX_POINT('',#96336); +#96336 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96337 = LINE('',#96338,#96339); +#96338 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96339 = VECTOR('',#96340,1.); +#96340 = DIRECTION('',(0.,1.,0.)); +#96341 = ORIENTED_EDGE('',*,*,#96342,.T.); +#96342 = EDGE_CURVE('',#96335,#96343,#96345,.T.); +#96343 = VERTEX_POINT('',#96344); +#96344 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96345 = LINE('',#96346,#96347); +#96346 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96347 = VECTOR('',#96348,1.); +#96348 = DIRECTION('',(1.,0.,0.)); +#96349 = ORIENTED_EDGE('',*,*,#96350,.T.); +#96350 = EDGE_CURVE('',#96343,#96351,#96353,.T.); +#96351 = VERTEX_POINT('',#96352); +#96352 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96353 = LINE('',#96354,#96355); +#96354 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96355 = VECTOR('',#96356,1.); +#96356 = DIRECTION('',(0.,1.,0.)); +#96357 = ORIENTED_EDGE('',*,*,#96358,.T.); +#96358 = EDGE_CURVE('',#96351,#96359,#96361,.T.); +#96359 = VERTEX_POINT('',#96360); +#96360 = CARTESIAN_POINT('',(4.07,2.7,0.)); +#96361 = LINE('',#96362,#96363); +#96362 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96363 = VECTOR('',#96364,1.); +#96364 = DIRECTION('',(1.,0.,0.)); +#96365 = ORIENTED_EDGE('',*,*,#96366,.F.); +#96366 = EDGE_CURVE('',#96367,#96359,#96369,.T.); +#96367 = VERTEX_POINT('',#96368); +#96368 = CARTESIAN_POINT('',(4.11,2.66,0.)); +#96369 = CIRCLE('',#96370,4.E-02); +#96370 = AXIS2_PLACEMENT_3D('',#96371,#96372,#96373); +#96371 = CARTESIAN_POINT('',(4.07,2.66,0.)); +#96372 = DIRECTION('',(0.,0.,1.)); +#96373 = DIRECTION('',(0.,-1.,0.)); +#96374 = ORIENTED_EDGE('',*,*,#96375,.F.); +#96375 = EDGE_CURVE('',#96376,#96367,#96378,.T.); +#96376 = VERTEX_POINT('',#96377); +#96377 = CARTESIAN_POINT('',(4.11,1.97,0.)); +#96378 = LINE('',#96379,#96380); +#96379 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96380 = VECTOR('',#96381,1.); +#96381 = DIRECTION('',(0.,1.,0.)); +#96382 = ORIENTED_EDGE('',*,*,#96383,.T.); +#96383 = EDGE_CURVE('',#96376,#96384,#96386,.T.); +#96384 = VERTEX_POINT('',#96385); +#96385 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96386 = CIRCLE('',#96387,8.E-02); +#96387 = AXIS2_PLACEMENT_3D('',#96388,#96389,#96390); +#96388 = CARTESIAN_POINT('',(4.11,1.89,0.)); +#96389 = DIRECTION('',(0.,0.,1.)); +#96390 = DIRECTION('',(1.,0.,-0.)); +#96391 = ORIENTED_EDGE('',*,*,#96392,.T.); +#96392 = EDGE_CURVE('',#96384,#96285,#96393,.T.); +#96393 = LINE('',#96394,#96395); +#96394 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96395 = VECTOR('',#96396,1.); +#96396 = DIRECTION('',(0.,-1.,0.)); +#96397 = ORIENTED_EDGE('',*,*,#96292,.T.); +#96398 = PLANE('',#96399); +#96399 = AXIS2_PLACEMENT_3D('',#96400,#96401,#96402); +#96400 = CARTESIAN_POINT('',(1.705187969925,6.260656153901E-17,0.)); +#96401 = DIRECTION('',(-0.,-0.,-1.)); +#96402 = DIRECTION('',(-1.,0.,0.)); +#96403 = ADVANCED_FACE('',(#96404),#96415,.T.); +#96404 = FACE_BOUND('',#96405,.T.); +#96405 = EDGE_LOOP('',(#96406,#96407,#96408,#96409)); +#96406 = ORIENTED_EDGE('',*,*,#96310,.F.); +#96407 = ORIENTED_EDGE('',*,*,#96153,.T.); +#96408 = ORIENTED_EDGE('',*,*,#96177,.T.); +#96409 = ORIENTED_EDGE('',*,*,#96410,.F.); +#96410 = EDGE_CURVE('',#96311,#96178,#96411,.T.); +#96411 = LINE('',#96412,#96413); +#96412 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96413 = VECTOR('',#96414,1.); +#96414 = DIRECTION('',(0.,0.,1.)); +#96415 = PLANE('',#96416); +#96416 = AXIS2_PLACEMENT_3D('',#96417,#96418,#96419); +#96417 = CARTESIAN_POINT('',(4.11,-2.7,0.)); +#96418 = DIRECTION('',(0.,-1.,0.)); +#96419 = DIRECTION('',(-1.,0.,0.)); +#96420 = ADVANCED_FACE('',(#96421),#96432,.T.); +#96421 = FACE_BOUND('',#96422,.T.); +#96422 = EDGE_LOOP('',(#96423,#96429,#96430,#96431)); +#96423 = ORIENTED_EDGE('',*,*,#96424,.T.); +#96424 = EDGE_CURVE('',#96384,#96251,#96425,.T.); +#96425 = LINE('',#96426,#96427); +#96426 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96427 = VECTOR('',#96428,1.); +#96428 = DIRECTION('',(0.,0.,1.)); +#96429 = ORIENTED_EDGE('',*,*,#96259,.T.); +#96430 = ORIENTED_EDGE('',*,*,#96284,.F.); +#96431 = ORIENTED_EDGE('',*,*,#96392,.F.); +#96432 = PLANE('',#96433); +#96433 = AXIS2_PLACEMENT_3D('',#96434,#96435,#96436); +#96434 = CARTESIAN_POINT('',(4.03,1.89,0.)); +#96435 = DIRECTION('',(1.,0.,-0.)); +#96436 = DIRECTION('',(0.,-1.,0.)); +#96437 = ADVANCED_FACE('',(#96438),#96449,.F.); +#96438 = FACE_BOUND('',#96439,.F.); +#96439 = EDGE_LOOP('',(#96440,#96441,#96442,#96448)); +#96440 = ORIENTED_EDGE('',*,*,#96424,.T.); +#96441 = ORIENTED_EDGE('',*,*,#96250,.T.); +#96442 = ORIENTED_EDGE('',*,*,#96443,.T.); +#96443 = EDGE_CURVE('',#96243,#96376,#96444,.T.); +#96444 = LINE('',#96445,#96446); +#96445 = CARTESIAN_POINT('',(4.11,1.97,0.)); +#96446 = VECTOR('',#96447,1.); +#96447 = DIRECTION('',(-0.,-0.,-1.)); +#96448 = ORIENTED_EDGE('',*,*,#96383,.T.); +#96449 = CYLINDRICAL_SURFACE('',#96450,8.E-02); +#96450 = AXIS2_PLACEMENT_3D('',#96451,#96452,#96453); +#96451 = CARTESIAN_POINT('',(4.11,1.89,0.)); +#96452 = DIRECTION('',(-0.,-0.,-1.)); +#96453 = DIRECTION('',(1.,0.,0.)); +#96454 = ADVANCED_FACE('',(#96455),#96466,.T.); +#96455 = FACE_BOUND('',#96456,.T.); +#96456 = EDGE_LOOP('',(#96457,#96458,#96459,#96465)); +#96457 = ORIENTED_EDGE('',*,*,#96443,.T.); +#96458 = ORIENTED_EDGE('',*,*,#96375,.T.); +#96459 = ORIENTED_EDGE('',*,*,#96460,.T.); +#96460 = EDGE_CURVE('',#96367,#96234,#96461,.T.); +#96461 = LINE('',#96462,#96463); +#96462 = CARTESIAN_POINT('',(4.11,2.66,0.)); +#96463 = VECTOR('',#96464,1.); +#96464 = DIRECTION('',(0.,0.,1.)); +#96465 = ORIENTED_EDGE('',*,*,#96242,.T.); +#96466 = PLANE('',#96467); +#96467 = AXIS2_PLACEMENT_3D('',#96468,#96469,#96470); +#96468 = CARTESIAN_POINT('',(4.11,0.,0.)); +#96469 = DIRECTION('',(1.,0.,-0.)); +#96470 = DIRECTION('',(0.,-1.,0.)); +#96471 = ADVANCED_FACE('',(#96472),#96483,.T.); +#96472 = FACE_BOUND('',#96473,.T.); +#96473 = EDGE_LOOP('',(#96474,#96475,#96481,#96482)); +#96474 = ORIENTED_EDGE('',*,*,#96366,.T.); +#96475 = ORIENTED_EDGE('',*,*,#96476,.T.); +#96476 = EDGE_CURVE('',#96359,#96226,#96477,.T.); +#96477 = LINE('',#96478,#96479); +#96478 = CARTESIAN_POINT('',(4.07,2.7,0.)); +#96479 = VECTOR('',#96480,1.); +#96480 = DIRECTION('',(0.,0.,1.)); +#96481 = ORIENTED_EDGE('',*,*,#96233,.F.); +#96482 = ORIENTED_EDGE('',*,*,#96460,.F.); +#96483 = CYLINDRICAL_SURFACE('',#96484,4.E-02); +#96484 = AXIS2_PLACEMENT_3D('',#96485,#96486,#96487); +#96485 = CARTESIAN_POINT('',(4.07,2.66,0.)); +#96486 = DIRECTION('',(0.,0.,1.)); +#96487 = DIRECTION('',(1.,0.,-0.)); +#96488 = ADVANCED_FACE('',(#96489),#96500,.T.); +#96489 = FACE_BOUND('',#96490,.T.); +#96490 = EDGE_LOOP('',(#96491,#96492,#96498,#96499)); +#96491 = ORIENTED_EDGE('',*,*,#96358,.F.); +#96492 = ORIENTED_EDGE('',*,*,#96493,.T.); +#96493 = EDGE_CURVE('',#96351,#96218,#96494,.T.); +#96494 = LINE('',#96495,#96496); +#96495 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96496 = VECTOR('',#96497,1.); +#96497 = DIRECTION('',(0.,0.,1.)); +#96498 = ORIENTED_EDGE('',*,*,#96225,.T.); +#96499 = ORIENTED_EDGE('',*,*,#96476,.F.); +#96500 = PLANE('',#96501); +#96501 = AXIS2_PLACEMENT_3D('',#96502,#96503,#96504); +#96502 = CARTESIAN_POINT('',(3.11,2.7,0.)); +#96503 = DIRECTION('',(0.,1.,0.)); +#96504 = DIRECTION('',(1.,0.,0.)); +#96505 = ADVANCED_FACE('',(#96506),#96517,.T.); +#96506 = FACE_BOUND('',#96507,.T.); +#96507 = EDGE_LOOP('',(#96508,#96514,#96515,#96516)); +#96508 = ORIENTED_EDGE('',*,*,#96509,.T.); +#96509 = EDGE_CURVE('',#96343,#96210,#96510,.T.); +#96510 = LINE('',#96511,#96512); +#96511 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96512 = VECTOR('',#96513,1.); +#96513 = DIRECTION('',(0.,0.,1.)); +#96514 = ORIENTED_EDGE('',*,*,#96217,.T.); +#96515 = ORIENTED_EDGE('',*,*,#96493,.F.); +#96516 = ORIENTED_EDGE('',*,*,#96350,.F.); +#96517 = PLANE('',#96518); +#96518 = AXIS2_PLACEMENT_3D('',#96519,#96520,#96521); +#96519 = CARTESIAN_POINT('',(3.11,2.16,0.)); +#96520 = DIRECTION('',(-1.,0.,0.)); +#96521 = DIRECTION('',(0.,1.,0.)); +#96522 = ADVANCED_FACE('',(#96523),#96534,.T.); +#96523 = FACE_BOUND('',#96524,.T.); +#96524 = EDGE_LOOP('',(#96525,#96531,#96532,#96533)); +#96525 = ORIENTED_EDGE('',*,*,#96526,.T.); +#96526 = EDGE_CURVE('',#96335,#96202,#96527,.T.); +#96527 = LINE('',#96528,#96529); +#96528 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96529 = VECTOR('',#96530,1.); +#96530 = DIRECTION('',(0.,0.,1.)); +#96531 = ORIENTED_EDGE('',*,*,#96209,.T.); +#96532 = ORIENTED_EDGE('',*,*,#96509,.F.); +#96533 = ORIENTED_EDGE('',*,*,#96342,.F.); +#96534 = PLANE('',#96535); +#96535 = AXIS2_PLACEMENT_3D('',#96536,#96537,#96538); +#96536 = CARTESIAN_POINT('',(-1.13,2.16,0.)); +#96537 = DIRECTION('',(0.,1.,0.)); +#96538 = DIRECTION('',(1.,0.,0.)); +#96539 = ADVANCED_FACE('',(#96540),#96551,.T.); +#96540 = FACE_BOUND('',#96541,.T.); +#96541 = EDGE_LOOP('',(#96542,#96548,#96549,#96550)); +#96542 = ORIENTED_EDGE('',*,*,#96543,.T.); +#96543 = EDGE_CURVE('',#96327,#96194,#96544,.T.); +#96544 = LINE('',#96545,#96546); +#96545 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96546 = VECTOR('',#96547,1.); +#96547 = DIRECTION('',(0.,0.,1.)); +#96548 = ORIENTED_EDGE('',*,*,#96201,.T.); +#96549 = ORIENTED_EDGE('',*,*,#96526,.F.); +#96550 = ORIENTED_EDGE('',*,*,#96334,.F.); +#96551 = PLANE('',#96552); +#96552 = AXIS2_PLACEMENT_3D('',#96553,#96554,#96555); +#96553 = CARTESIAN_POINT('',(-1.13,-2.16,0.)); +#96554 = DIRECTION('',(-1.,0.,0.)); +#96555 = DIRECTION('',(0.,1.,0.)); +#96556 = ADVANCED_FACE('',(#96557),#96568,.T.); +#96557 = FACE_BOUND('',#96558,.T.); +#96558 = EDGE_LOOP('',(#96559,#96565,#96566,#96567)); +#96559 = ORIENTED_EDGE('',*,*,#96560,.T.); +#96560 = EDGE_CURVE('',#96319,#96186,#96561,.T.); +#96561 = LINE('',#96562,#96563); +#96562 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96563 = VECTOR('',#96564,1.); +#96564 = DIRECTION('',(0.,0.,1.)); +#96565 = ORIENTED_EDGE('',*,*,#96193,.T.); +#96566 = ORIENTED_EDGE('',*,*,#96543,.F.); +#96567 = ORIENTED_EDGE('',*,*,#96326,.F.); +#96568 = PLANE('',#96569); +#96569 = AXIS2_PLACEMENT_3D('',#96570,#96571,#96572); +#96570 = CARTESIAN_POINT('',(3.11,-2.16,0.)); +#96571 = DIRECTION('',(0.,-1.,0.)); +#96572 = DIRECTION('',(-1.,0.,0.)); +#96573 = ADVANCED_FACE('',(#96574),#96580,.T.); +#96574 = FACE_BOUND('',#96575,.T.); +#96575 = EDGE_LOOP('',(#96576,#96577,#96578,#96579)); +#96576 = ORIENTED_EDGE('',*,*,#96410,.T.); +#96577 = ORIENTED_EDGE('',*,*,#96185,.T.); +#96578 = ORIENTED_EDGE('',*,*,#96560,.F.); +#96579 = ORIENTED_EDGE('',*,*,#96318,.F.); +#96580 = PLANE('',#96581); +#96581 = AXIS2_PLACEMENT_3D('',#96582,#96583,#96584); +#96582 = CARTESIAN_POINT('',(3.11,-2.7,0.)); +#96583 = DIRECTION('',(-1.,0.,0.)); +#96584 = DIRECTION('',(0.,1.,0.)); +#96585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96589)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96586,#96587,#96588)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96586 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96587 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96588 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96589 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96586, + 'distance_accuracy_value','confusion accuracy'); +#96590 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96591,#96593); +#96591 = ( REPRESENTATION_RELATIONSHIP('','',#96096,#96073) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96592) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96592 = ITEM_DEFINED_TRANSFORMATION('','',#11,#96074); +#96593 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96594); +#96594 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('111','3','',#96068,#96091,$); +#96595 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96093)); +#96596 = SHAPE_DEFINITION_REPRESENTATION(#96597,#96603); +#96597 = PRODUCT_DEFINITION_SHAPE('','',#96598); +#96598 = PRODUCT_DEFINITION('design','',#96599,#96602); +#96599 = PRODUCT_DEFINITION_FORMATION('','',#96600); +#96600 = PRODUCT('932d09b5-9c39-11ed-93f0-dde97e994e83', + '932d09b5-9c39-11ed-93f0-dde97e994e83','',(#96601)); +#96601 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96602 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96603 = SHAPE_REPRESENTATION('',(#11,#96604),#96608); +#96604 = AXIS2_PLACEMENT_3D('',#96605,#96606,#96607); +#96605 = CARTESIAN_POINT('',(0.,0.,0.)); +#96606 = DIRECTION('',(0.,0.,1.)); +#96607 = DIRECTION('',(1.,0.,0.)); +#96608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#96612)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#96609,#96610,#96611)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#96609 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#96610 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#96611 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#96612 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#96609, + 'distance_accuracy_value','confusion accuracy'); +#96613 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#96614,#96616); +#96614 = ( REPRESENTATION_RELATIONSHIP('','',#96603,#95658) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#96615) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#96615 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95667); +#96616 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #96617); +#96617 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('114','6','',#95653,#96598,$); +#96618 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96600)); +#96619 = SHAPE_DEFINITION_REPRESENTATION(#96620,#96626); +#96620 = PRODUCT_DEFINITION_SHAPE('','',#96621); +#96621 = PRODUCT_DEFINITION('design','',#96622,#96625); +#96622 = PRODUCT_DEFINITION_FORMATION('','',#96623); +#96623 = PRODUCT('932d09b5-9c39-11ed-93f0-dde97e994e83_part', + '932d09b5-9c39-11ed-93f0-dde97e994e83_part','',(#96624)); +#96624 = PRODUCT_CONTEXT('',#2,'mechanical'); +#96625 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#96626 = SHAPE_REPRESENTATION('',(#11,#96627,#97317,#97599),#98289); +#96627 = MANIFOLD_SOLID_BREP('',#96628); +#96628 = CLOSED_SHELL('',(#96629,#96687,#96753,#96809,#96833,#96889, + #96948,#96965,#96982,#97049,#97066,#97097,#97121,#97146,#97163, + #97187,#97212,#97229,#97252,#97269,#97288,#97305)); +#96629 = ADVANCED_FACE('',(#96630),#96682,.T.); +#96630 = FACE_BOUND('',#96631,.T.); +#96631 = EDGE_LOOP('',(#96632,#96643,#96651,#96660,#96668,#96676)); +#96632 = ORIENTED_EDGE('',*,*,#96633,.T.); +#96633 = EDGE_CURVE('',#96634,#96636,#96638,.T.); +#96634 = VERTEX_POINT('',#96635); +#96635 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.93988764291)); +#96636 = VERTEX_POINT('',#96637); +#96637 = CARTESIAN_POINT('',(-4.24,-1.785,0.939877074976)); +#96638 = CIRCLE('',#96639,0.25); +#96639 = AXIS2_PLACEMENT_3D('',#96640,#96641,#96642); +#96640 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96641 = DIRECTION('',(0.,-1.,0.)); +#96642 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96643 = ORIENTED_EDGE('',*,*,#96644,.T.); +#96644 = EDGE_CURVE('',#96636,#96645,#96647,.T.); +#96645 = VERTEX_POINT('',#96646); +#96646 = CARTESIAN_POINT('',(-4.24,-1.785,1.439884120332)); +#96647 = LINE('',#96648,#96649); +#96648 = CARTESIAN_POINT('',(-4.24,-1.785,0.437372862773)); +#96649 = VECTOR('',#96650,1.); +#96650 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96651 = ORIENTED_EDGE('',*,*,#96652,.T.); +#96652 = EDGE_CURVE('',#96645,#96653,#96655,.T.); +#96653 = VERTEX_POINT('',#96654); +#96654 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96655 = CIRCLE('',#96656,0.75); +#96656 = AXIS2_PLACEMENT_3D('',#96657,#96658,#96659); +#96657 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96658 = DIRECTION('',(0.,1.,0.)); +#96659 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96660 = ORIENTED_EDGE('',*,*,#96661,.T.); +#96661 = EDGE_CURVE('',#96653,#96662,#96664,.T.); +#96662 = VERTEX_POINT('',#96663); +#96663 = CARTESIAN_POINT('',(-3.49,-1.785,1.43988764291)); +#96664 = LINE('',#96665,#96666); +#96665 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96666 = VECTOR('',#96667,1.); +#96667 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96668 = ORIENTED_EDGE('',*,*,#96669,.T.); +#96669 = EDGE_CURVE('',#96662,#96670,#96672,.T.); +#96670 = VERTEX_POINT('',#96671); +#96671 = CARTESIAN_POINT('',(-3.49,-1.785,0.93988764291)); +#96672 = LINE('',#96673,#96674); +#96673 = CARTESIAN_POINT('',(-3.49,-1.785,0.437372862773)); +#96674 = VECTOR('',#96675,1.); +#96675 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#96676 = ORIENTED_EDGE('',*,*,#96677,.T.); +#96677 = EDGE_CURVE('',#96670,#96634,#96678,.T.); +#96678 = LINE('',#96679,#96680); +#96679 = CARTESIAN_POINT('',(-2.237701336216,-1.785,0.93988764291)); +#96680 = VECTOR('',#96681,1.); +#96681 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96682 = PLANE('',#96683); +#96683 = AXIS2_PLACEMENT_3D('',#96684,#96685,#96686); +#96684 = CARTESIAN_POINT('',(-4.091426690538,-1.785,0.874745725546)); +#96685 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#96686 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96687 = ADVANCED_FACE('',(#96688),#96748,.F.); +#96688 = FACE_BOUND('',#96689,.F.); +#96689 = EDGE_LOOP('',(#96690,#96698,#96707,#96715,#96724,#96732,#96741, + #96747)); +#96690 = ORIENTED_EDGE('',*,*,#96691,.F.); +#96691 = EDGE_CURVE('',#96692,#96636,#96694,.T.); +#96692 = VERTEX_POINT('',#96693); +#96693 = CARTESIAN_POINT('',(-4.24,-1.905,0.939877074976)); +#96694 = LINE('',#96695,#96696); +#96695 = CARTESIAN_POINT('',(-4.24,-1.785,0.939877074976)); +#96696 = VECTOR('',#96697,1.); +#96697 = DIRECTION('',(-0.,1.,-0.)); +#96698 = ORIENTED_EDGE('',*,*,#96699,.T.); +#96699 = EDGE_CURVE('',#96692,#96700,#96702,.T.); +#96700 = VERTEX_POINT('',#96701); +#96701 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#96702 = CIRCLE('',#96703,0.25); +#96703 = AXIS2_PLACEMENT_3D('',#96704,#96705,#96706); +#96704 = CARTESIAN_POINT('',(-4.237701336216,-1.905,0.68988764291)); +#96705 = DIRECTION('',(0.,-1.,0.)); +#96706 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96707 = ORIENTED_EDGE('',*,*,#96708,.T.); +#96708 = EDGE_CURVE('',#96700,#96709,#96711,.T.); +#96709 = VERTEX_POINT('',#96710); +#96710 = CARTESIAN_POINT('',(-4.472624491413,-2.655,0.775392678742)); +#96711 = LINE('',#96712,#96713); +#96712 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#96713 = VECTOR('',#96714,1.); +#96714 = DIRECTION('',(0.,-1.,0.)); +#96715 = ORIENTED_EDGE('',*,*,#96716,.F.); +#96716 = EDGE_CURVE('',#96717,#96709,#96719,.T.); +#96717 = VERTEX_POINT('',#96718); +#96718 = CARTESIAN_POINT('',(-4.24,-2.655,0.939877074976)); +#96719 = CIRCLE('',#96720,0.25); +#96720 = AXIS2_PLACEMENT_3D('',#96721,#96722,#96723); +#96721 = CARTESIAN_POINT('',(-4.237701336216,-2.655,0.68988764291)); +#96722 = DIRECTION('',(0.,-1.,0.)); +#96723 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96724 = ORIENTED_EDGE('',*,*,#96725,.F.); +#96725 = EDGE_CURVE('',#96726,#96717,#96728,.T.); +#96726 = VERTEX_POINT('',#96727); +#96727 = CARTESIAN_POINT('',(-4.24,-2.775,0.939877074976)); +#96728 = LINE('',#96729,#96730); +#96729 = CARTESIAN_POINT('',(-4.24,-1.785,0.939877074976)); +#96730 = VECTOR('',#96731,1.); +#96731 = DIRECTION('',(-0.,1.,-0.)); +#96732 = ORIENTED_EDGE('',*,*,#96733,.F.); +#96733 = EDGE_CURVE('',#96734,#96726,#96736,.T.); +#96734 = VERTEX_POINT('',#96735); +#96735 = CARTESIAN_POINT('',(-4.237701336216,-2.775,0.93988764291)); +#96736 = CIRCLE('',#96737,0.25); +#96737 = AXIS2_PLACEMENT_3D('',#96738,#96739,#96740); +#96738 = CARTESIAN_POINT('',(-4.237701336216,-2.775,0.68988764291)); +#96739 = DIRECTION('',(0.,-1.,0.)); +#96740 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96741 = ORIENTED_EDGE('',*,*,#96742,.F.); +#96742 = EDGE_CURVE('',#96634,#96734,#96743,.T.); +#96743 = LINE('',#96744,#96745); +#96744 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.93988764291)); +#96745 = VECTOR('',#96746,1.); +#96746 = DIRECTION('',(0.,-1.,0.)); +#96747 = ORIENTED_EDGE('',*,*,#96633,.T.); +#96748 = CYLINDRICAL_SURFACE('',#96749,0.25); +#96749 = AXIS2_PLACEMENT_3D('',#96750,#96751,#96752); +#96750 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96751 = DIRECTION('',(-0.,1.,-0.)); +#96752 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#96753 = ADVANCED_FACE('',(#96754),#96804,.T.); +#96754 = FACE_BOUND('',#96755,.T.); +#96755 = EDGE_LOOP('',(#96756,#96757,#96765,#96773,#96781,#96789,#96797, + #96803)); +#96756 = ORIENTED_EDGE('',*,*,#96677,.F.); +#96757 = ORIENTED_EDGE('',*,*,#96758,.T.); +#96758 = EDGE_CURVE('',#96670,#96759,#96761,.T.); +#96759 = VERTEX_POINT('',#96760); +#96760 = CARTESIAN_POINT('',(-3.49,-1.905,0.93988764291)); +#96761 = LINE('',#96762,#96763); +#96762 = CARTESIAN_POINT('',(-3.49,0.7325,0.93988764291)); +#96763 = VECTOR('',#96764,1.); +#96764 = DIRECTION('',(0.,-1.,0.)); +#96765 = ORIENTED_EDGE('',*,*,#96766,.F.); +#96766 = EDGE_CURVE('',#96767,#96759,#96769,.T.); +#96767 = VERTEX_POINT('',#96768); +#96768 = CARTESIAN_POINT('',(-2.237701336216,-1.905,0.93988764291)); +#96769 = LINE('',#96770,#96771); +#96770 = CARTESIAN_POINT('',(-2.237701336216,-1.905,0.93988764291)); +#96771 = VECTOR('',#96772,1.); +#96772 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96773 = ORIENTED_EDGE('',*,*,#96774,.T.); +#96774 = EDGE_CURVE('',#96767,#96775,#96777,.T.); +#96775 = VERTEX_POINT('',#96776); +#96776 = CARTESIAN_POINT('',(-2.237701336216,-2.655,0.93988764291)); +#96777 = LINE('',#96778,#96779); +#96778 = CARTESIAN_POINT('',(-2.237701336216,-1.905,0.93988764291)); +#96779 = VECTOR('',#96780,1.); +#96780 = DIRECTION('',(0.,-1.,0.)); +#96781 = ORIENTED_EDGE('',*,*,#96782,.T.); +#96782 = EDGE_CURVE('',#96775,#96783,#96785,.T.); +#96783 = VERTEX_POINT('',#96784); +#96784 = CARTESIAN_POINT('',(-3.49,-2.655,0.93988764291)); +#96785 = LINE('',#96786,#96787); +#96786 = CARTESIAN_POINT('',(-2.237701336216,-2.655,0.93988764291)); +#96787 = VECTOR('',#96788,1.); +#96788 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96789 = ORIENTED_EDGE('',*,*,#96790,.T.); +#96790 = EDGE_CURVE('',#96783,#96791,#96793,.T.); +#96791 = VERTEX_POINT('',#96792); +#96792 = CARTESIAN_POINT('',(-3.49,-2.775,0.93988764291)); +#96793 = LINE('',#96794,#96795); +#96794 = CARTESIAN_POINT('',(-3.49,0.7325,0.93988764291)); +#96795 = VECTOR('',#96796,1.); +#96796 = DIRECTION('',(0.,-1.,0.)); +#96797 = ORIENTED_EDGE('',*,*,#96798,.T.); +#96798 = EDGE_CURVE('',#96791,#96734,#96799,.T.); +#96799 = LINE('',#96800,#96801); +#96800 = CARTESIAN_POINT('',(-2.237701336216,-2.775,0.93988764291)); +#96801 = VECTOR('',#96802,1.); +#96802 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96803 = ORIENTED_EDGE('',*,*,#96742,.F.); +#96804 = PLANE('',#96805); +#96805 = AXIS2_PLACEMENT_3D('',#96806,#96807,#96808); +#96806 = CARTESIAN_POINT('',(-2.237701336216,-1.785,0.93988764291)); +#96807 = DIRECTION('',(-1.110223024625E-16,-0.,-1.)); +#96808 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#96809 = ADVANCED_FACE('',(#96810),#96828,.T.); +#96810 = FACE_BOUND('',#96811,.T.); +#96811 = EDGE_LOOP('',(#96812,#96813,#96821,#96827)); +#96812 = ORIENTED_EDGE('',*,*,#96669,.F.); +#96813 = ORIENTED_EDGE('',*,*,#96814,.F.); +#96814 = EDGE_CURVE('',#96815,#96662,#96817,.T.); +#96815 = VERTEX_POINT('',#96816); +#96816 = CARTESIAN_POINT('',(-3.49,-1.905,1.43988764291)); +#96817 = LINE('',#96818,#96819); +#96818 = CARTESIAN_POINT('',(-3.49,0.7325,1.43988764291)); +#96819 = VECTOR('',#96820,1.); +#96820 = DIRECTION('',(-0.,1.,0.)); +#96821 = ORIENTED_EDGE('',*,*,#96822,.T.); +#96822 = EDGE_CURVE('',#96815,#96759,#96823,.T.); +#96823 = LINE('',#96824,#96825); +#96824 = CARTESIAN_POINT('',(-3.49,-1.905,0.437372862773)); +#96825 = VECTOR('',#96826,1.); +#96826 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#96827 = ORIENTED_EDGE('',*,*,#96758,.F.); +#96828 = PLANE('',#96829); +#96829 = AXIS2_PLACEMENT_3D('',#96830,#96831,#96832); +#96830 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#96831 = DIRECTION('',(1.,0.,-0.)); +#96832 = DIRECTION('',(0.,-1.,0.)); +#96833 = ADVANCED_FACE('',(#96834),#96884,.T.); +#96834 = FACE_BOUND('',#96835,.T.); +#96835 = EDGE_LOOP('',(#96836,#96837,#96845,#96853,#96861,#96869,#96877, + #96883)); +#96836 = ORIENTED_EDGE('',*,*,#96661,.F.); +#96837 = ORIENTED_EDGE('',*,*,#96838,.T.); +#96838 = EDGE_CURVE('',#96653,#96839,#96841,.T.); +#96839 = VERTEX_POINT('',#96840); +#96840 = CARTESIAN_POINT('',(-4.237701336216,-2.775,1.43988764291)); +#96841 = LINE('',#96842,#96843); +#96842 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96843 = VECTOR('',#96844,1.); +#96844 = DIRECTION('',(0.,-1.,0.)); +#96845 = ORIENTED_EDGE('',*,*,#96846,.T.); +#96846 = EDGE_CURVE('',#96839,#96847,#96849,.T.); +#96847 = VERTEX_POINT('',#96848); +#96848 = CARTESIAN_POINT('',(-3.49,-2.775,1.43988764291)); +#96849 = LINE('',#96850,#96851); +#96850 = CARTESIAN_POINT('',(-4.237701336216,-2.775,1.43988764291)); +#96851 = VECTOR('',#96852,1.); +#96852 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96853 = ORIENTED_EDGE('',*,*,#96854,.T.); +#96854 = EDGE_CURVE('',#96847,#96855,#96857,.T.); +#96855 = VERTEX_POINT('',#96856); +#96856 = CARTESIAN_POINT('',(-3.49,-2.655,1.43988764291)); +#96857 = LINE('',#96858,#96859); +#96858 = CARTESIAN_POINT('',(-3.49,0.7325,1.43988764291)); +#96859 = VECTOR('',#96860,1.); +#96860 = DIRECTION('',(-0.,1.,0.)); +#96861 = ORIENTED_EDGE('',*,*,#96862,.T.); +#96862 = EDGE_CURVE('',#96855,#96863,#96865,.T.); +#96863 = VERTEX_POINT('',#96864); +#96864 = CARTESIAN_POINT('',(-2.237701336216,-2.655,1.43988764291)); +#96865 = LINE('',#96866,#96867); +#96866 = CARTESIAN_POINT('',(-4.237701336216,-2.655,1.43988764291)); +#96867 = VECTOR('',#96868,1.); +#96868 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96869 = ORIENTED_EDGE('',*,*,#96870,.F.); +#96870 = EDGE_CURVE('',#96871,#96863,#96873,.T.); +#96871 = VERTEX_POINT('',#96872); +#96872 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#96873 = LINE('',#96874,#96875); +#96874 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#96875 = VECTOR('',#96876,1.); +#96876 = DIRECTION('',(0.,-1.,0.)); +#96877 = ORIENTED_EDGE('',*,*,#96878,.F.); +#96878 = EDGE_CURVE('',#96815,#96871,#96879,.T.); +#96879 = LINE('',#96880,#96881); +#96880 = CARTESIAN_POINT('',(-4.237701336216,-1.905,1.43988764291)); +#96881 = VECTOR('',#96882,1.); +#96882 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96883 = ORIENTED_EDGE('',*,*,#96814,.T.); +#96884 = PLANE('',#96885); +#96885 = AXIS2_PLACEMENT_3D('',#96886,#96887,#96888); +#96886 = CARTESIAN_POINT('',(-4.237701336216,-1.785,1.43988764291)); +#96887 = DIRECTION('',(1.110223024625E-16,0.,1.)); +#96888 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#96889 = ADVANCED_FACE('',(#96890),#96943,.T.); +#96890 = FACE_BOUND('',#96891,.T.); +#96891 = EDGE_LOOP('',(#96892,#96893,#96901,#96910,#96918,#96927,#96935, + #96942)); +#96892 = ORIENTED_EDGE('',*,*,#96652,.F.); +#96893 = ORIENTED_EDGE('',*,*,#96894,.F.); +#96894 = EDGE_CURVE('',#96895,#96645,#96897,.T.); +#96895 = VERTEX_POINT('',#96896); +#96896 = CARTESIAN_POINT('',(-4.24,-1.905,1.439884120332)); +#96897 = LINE('',#96898,#96899); +#96898 = CARTESIAN_POINT('',(-4.24,-1.785,1.439884120332)); +#96899 = VECTOR('',#96900,1.); +#96900 = DIRECTION('',(0.,1.,0.)); +#96901 = ORIENTED_EDGE('',*,*,#96902,.F.); +#96902 = EDGE_CURVE('',#96903,#96895,#96905,.T.); +#96903 = VERTEX_POINT('',#96904); +#96904 = CARTESIAN_POINT('',(-4.942470801806,-1.905,0.946402750404)); +#96905 = CIRCLE('',#96906,0.75); +#96906 = AXIS2_PLACEMENT_3D('',#96907,#96908,#96909); +#96907 = CARTESIAN_POINT('',(-4.237701336216,-1.905,0.68988764291)); +#96908 = DIRECTION('',(0.,1.,0.)); +#96909 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96910 = ORIENTED_EDGE('',*,*,#96911,.T.); +#96911 = EDGE_CURVE('',#96903,#96912,#96914,.T.); +#96912 = VERTEX_POINT('',#96913); +#96913 = CARTESIAN_POINT('',(-4.942470801806,-2.655,0.946402750404)); +#96914 = LINE('',#96915,#96916); +#96915 = CARTESIAN_POINT('',(-4.942470801806,-1.905,0.946402750404)); +#96916 = VECTOR('',#96917,1.); +#96917 = DIRECTION('',(0.,-1.,0.)); +#96918 = ORIENTED_EDGE('',*,*,#96919,.T.); +#96919 = EDGE_CURVE('',#96912,#96920,#96922,.T.); +#96920 = VERTEX_POINT('',#96921); +#96921 = CARTESIAN_POINT('',(-4.24,-2.655,1.439884120332)); +#96922 = CIRCLE('',#96923,0.75); +#96923 = AXIS2_PLACEMENT_3D('',#96924,#96925,#96926); +#96924 = CARTESIAN_POINT('',(-4.237701336216,-2.655,0.68988764291)); +#96925 = DIRECTION('',(0.,1.,0.)); +#96926 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96927 = ORIENTED_EDGE('',*,*,#96928,.F.); +#96928 = EDGE_CURVE('',#96929,#96920,#96931,.T.); +#96929 = VERTEX_POINT('',#96930); +#96930 = CARTESIAN_POINT('',(-4.24,-2.775,1.439884120332)); +#96931 = LINE('',#96932,#96933); +#96932 = CARTESIAN_POINT('',(-4.24,-1.785,1.439884120332)); +#96933 = VECTOR('',#96934,1.); +#96934 = DIRECTION('',(0.,1.,0.)); +#96935 = ORIENTED_EDGE('',*,*,#96936,.T.); +#96936 = EDGE_CURVE('',#96929,#96839,#96937,.T.); +#96937 = CIRCLE('',#96938,0.75); +#96938 = AXIS2_PLACEMENT_3D('',#96939,#96940,#96941); +#96939 = CARTESIAN_POINT('',(-4.237701336216,-2.775,0.68988764291)); +#96940 = DIRECTION('',(0.,1.,0.)); +#96941 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96942 = ORIENTED_EDGE('',*,*,#96838,.F.); +#96943 = CYLINDRICAL_SURFACE('',#96944,0.75); +#96944 = AXIS2_PLACEMENT_3D('',#96945,#96946,#96947); +#96945 = CARTESIAN_POINT('',(-4.237701336216,-1.785,0.68988764291)); +#96946 = DIRECTION('',(0.,1.,0.)); +#96947 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#96948 = ADVANCED_FACE('',(#96949),#96960,.T.); +#96949 = FACE_BOUND('',#96950,.T.); +#96950 = EDGE_LOOP('',(#96951,#96952,#96958,#96959)); +#96951 = ORIENTED_EDGE('',*,*,#96691,.F.); +#96952 = ORIENTED_EDGE('',*,*,#96953,.T.); +#96953 = EDGE_CURVE('',#96692,#96895,#96954,.T.); +#96954 = LINE('',#96955,#96956); +#96955 = CARTESIAN_POINT('',(-4.24,-1.905,0.437372862773)); +#96956 = VECTOR('',#96957,1.); +#96957 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96958 = ORIENTED_EDGE('',*,*,#96894,.T.); +#96959 = ORIENTED_EDGE('',*,*,#96644,.F.); +#96960 = PLANE('',#96961); +#96961 = AXIS2_PLACEMENT_3D('',#96962,#96963,#96964); +#96962 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#96963 = DIRECTION('',(-1.,0.,0.)); +#96964 = DIRECTION('',(0.,1.,0.)); +#96965 = ADVANCED_FACE('',(#96966),#96977,.T.); +#96966 = FACE_BOUND('',#96967,.T.); +#96967 = EDGE_LOOP('',(#96968,#96969,#96970,#96976)); +#96968 = ORIENTED_EDGE('',*,*,#96822,.F.); +#96969 = ORIENTED_EDGE('',*,*,#96878,.T.); +#96970 = ORIENTED_EDGE('',*,*,#96971,.T.); +#96971 = EDGE_CURVE('',#96871,#96767,#96972,.T.); +#96972 = LINE('',#96973,#96974); +#96973 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#96974 = VECTOR('',#96975,1.); +#96975 = DIRECTION('',(0.,0.,-1.)); +#96976 = ORIENTED_EDGE('',*,*,#96766,.T.); +#96977 = PLANE('',#96978); +#96978 = AXIS2_PLACEMENT_3D('',#96979,#96980,#96981); +#96979 = CARTESIAN_POINT('',(-4.091426690538,-1.905,0.874745725546)); +#96980 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#96981 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#96982 = ADVANCED_FACE('',(#96983),#97044,.T.); +#96983 = FACE_BOUND('',#96984,.T.); +#96984 = EDGE_LOOP('',(#96985,#96995,#97003,#97012,#97018,#97019,#97020, + #97021,#97029,#97038)); +#96985 = ORIENTED_EDGE('',*,*,#96986,.T.); +#96986 = EDGE_CURVE('',#96987,#96989,#96991,.T.); +#96987 = VERTEX_POINT('',#96988); +#96988 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#96989 = VERTEX_POINT('',#96990); +#96990 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#96991 = LINE('',#96992,#96993); +#96992 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#96993 = VECTOR('',#96994,1.); +#96994 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#96995 = ORIENTED_EDGE('',*,*,#96996,.T.); +#96996 = EDGE_CURVE('',#96989,#96997,#96999,.T.); +#96997 = VERTEX_POINT('',#96998); +#96998 = CARTESIAN_POINT('',(-5.28,-1.905,0.5)); +#96999 = LINE('',#97000,#97001); +#97000 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#97001 = VECTOR('',#97002,1.); +#97002 = DIRECTION('',(1.,0.,0.)); +#97003 = ORIENTED_EDGE('',*,*,#97004,.T.); +#97004 = EDGE_CURVE('',#96997,#97005,#97007,.T.); +#97005 = VERTEX_POINT('',#97006); +#97006 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97007 = CIRCLE('',#97008,0.25); +#97008 = AXIS2_PLACEMENT_3D('',#97009,#97010,#97011); +#97009 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97010 = DIRECTION('',(0.,-1.,0.)); +#97011 = DIRECTION('',(0.,0.,-1.)); +#97012 = ORIENTED_EDGE('',*,*,#97013,.T.); +#97013 = EDGE_CURVE('',#97005,#96903,#97014,.T.); +#97014 = LINE('',#97015,#97016); +#97015 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97016 = VECTOR('',#97017,1.); +#97017 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97018 = ORIENTED_EDGE('',*,*,#96902,.T.); +#97019 = ORIENTED_EDGE('',*,*,#96953,.F.); +#97020 = ORIENTED_EDGE('',*,*,#96699,.T.); +#97021 = ORIENTED_EDGE('',*,*,#97022,.T.); +#97022 = EDGE_CURVE('',#96700,#97023,#97025,.T.); +#97023 = VERTEX_POINT('',#97024); +#97024 = CARTESIAN_POINT('',(-4.575230534411,-1.905,0.493484892506)); +#97025 = LINE('',#97026,#97027); +#97026 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#97027 = VECTOR('',#97028,1.); +#97028 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#97029 = ORIENTED_EDGE('',*,*,#97030,.T.); +#97030 = EDGE_CURVE('',#97023,#97031,#97033,.T.); +#97031 = VERTEX_POINT('',#97032); +#97032 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97033 = CIRCLE('',#97034,0.75); +#97034 = AXIS2_PLACEMENT_3D('',#97035,#97036,#97037); +#97035 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97036 = DIRECTION('',(0.,1.,0.)); +#97037 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97038 = ORIENTED_EDGE('',*,*,#97039,.T.); +#97039 = EDGE_CURVE('',#97031,#96987,#97040,.T.); +#97040 = LINE('',#97041,#97042); +#97041 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97042 = VECTOR('',#97043,1.); +#97043 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#97044 = PLANE('',#97045); +#97045 = AXIS2_PLACEMENT_3D('',#97046,#97047,#97048); +#97046 = CARTESIAN_POINT('',(-4.091426690538,-1.905,0.874745725546)); +#97047 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97048 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97049 = ADVANCED_FACE('',(#97050),#97061,.T.); +#97050 = FACE_BOUND('',#97051,.T.); +#97051 = EDGE_LOOP('',(#97052,#97053,#97059,#97060)); +#97052 = ORIENTED_EDGE('',*,*,#96870,.T.); +#97053 = ORIENTED_EDGE('',*,*,#97054,.T.); +#97054 = EDGE_CURVE('',#96863,#96775,#97055,.T.); +#97055 = LINE('',#97056,#97057); +#97056 = CARTESIAN_POINT('',(-2.237701336216,-2.655,1.43988764291)); +#97057 = VECTOR('',#97058,1.); +#97058 = DIRECTION('',(0.,0.,-1.)); +#97059 = ORIENTED_EDGE('',*,*,#96774,.F.); +#97060 = ORIENTED_EDGE('',*,*,#96971,.F.); +#97061 = PLANE('',#97062); +#97062 = AXIS2_PLACEMENT_3D('',#97063,#97064,#97065); +#97063 = CARTESIAN_POINT('',(-2.237701336216,-1.905,1.43988764291)); +#97064 = DIRECTION('',(1.,0.,0.)); +#97065 = DIRECTION('',(0.,0.,-1.)); +#97066 = ADVANCED_FACE('',(#97067),#97092,.T.); +#97067 = FACE_BOUND('',#97068,.T.); +#97068 = EDGE_LOOP('',(#97069,#97077,#97085,#97091)); +#97069 = ORIENTED_EDGE('',*,*,#97070,.T.); +#97070 = EDGE_CURVE('',#96987,#97071,#97073,.T.); +#97071 = VERTEX_POINT('',#97072); +#97072 = CARTESIAN_POINT('',(-5.79,-2.655,-2.70609920631E-16)); +#97073 = LINE('',#97074,#97075); +#97074 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#97075 = VECTOR('',#97076,1.); +#97076 = DIRECTION('',(0.,-1.,0.)); +#97077 = ORIENTED_EDGE('',*,*,#97078,.T.); +#97078 = EDGE_CURVE('',#97071,#97079,#97081,.T.); +#97079 = VERTEX_POINT('',#97080); +#97080 = CARTESIAN_POINT('',(-5.79,-2.655,0.5)); +#97081 = LINE('',#97082,#97083); +#97082 = CARTESIAN_POINT('',(-5.79,-2.655,-2.70609920631E-16)); +#97083 = VECTOR('',#97084,1.); +#97084 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#97085 = ORIENTED_EDGE('',*,*,#97086,.F.); +#97086 = EDGE_CURVE('',#96989,#97079,#97087,.T.); +#97087 = LINE('',#97088,#97089); +#97088 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#97089 = VECTOR('',#97090,1.); +#97090 = DIRECTION('',(0.,-1.,0.)); +#97091 = ORIENTED_EDGE('',*,*,#96986,.F.); +#97092 = PLANE('',#97093); +#97093 = AXIS2_PLACEMENT_3D('',#97094,#97095,#97096); +#97094 = CARTESIAN_POINT('',(-5.79,-1.905,-2.70609920631E-16)); +#97095 = DIRECTION('',(-1.,0.,1.7763568394E-15)); +#97096 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#97097 = ADVANCED_FACE('',(#97098),#97116,.T.); +#97098 = FACE_BOUND('',#97099,.T.); +#97099 = EDGE_LOOP('',(#97100,#97108,#97114,#97115)); +#97100 = ORIENTED_EDGE('',*,*,#97101,.T.); +#97101 = EDGE_CURVE('',#97031,#97102,#97104,.T.); +#97102 = VERTEX_POINT('',#97103); +#97103 = CARTESIAN_POINT('',(-5.28,-2.655,-2.22044604925E-16)); +#97104 = LINE('',#97105,#97106); +#97105 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97106 = VECTOR('',#97107,1.); +#97107 = DIRECTION('',(0.,-1.,0.)); +#97108 = ORIENTED_EDGE('',*,*,#97109,.T.); +#97109 = EDGE_CURVE('',#97102,#97071,#97110,.T.); +#97110 = LINE('',#97111,#97112); +#97111 = CARTESIAN_POINT('',(-5.28,-2.655,-2.22044604925E-16)); +#97112 = VECTOR('',#97113,1.); +#97113 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#97114 = ORIENTED_EDGE('',*,*,#97070,.F.); +#97115 = ORIENTED_EDGE('',*,*,#97039,.F.); +#97116 = PLANE('',#97117); +#97117 = AXIS2_PLACEMENT_3D('',#97118,#97119,#97120); +#97118 = CARTESIAN_POINT('',(-5.28,-1.905,-2.22044604925E-16)); +#97119 = DIRECTION('',(9.522610922745E-17,0.,-1.)); +#97120 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#97121 = ADVANCED_FACE('',(#97122),#97141,.T.); +#97122 = FACE_BOUND('',#97123,.T.); +#97123 = EDGE_LOOP('',(#97124,#97132,#97139,#97140)); +#97124 = ORIENTED_EDGE('',*,*,#97125,.T.); +#97125 = EDGE_CURVE('',#97023,#97126,#97128,.T.); +#97126 = VERTEX_POINT('',#97127); +#97127 = CARTESIAN_POINT('',(-4.575230534411,-2.655,0.493484892506)); +#97128 = LINE('',#97129,#97130); +#97129 = CARTESIAN_POINT('',(-4.575230534411,-1.905,0.493484892506)); +#97130 = VECTOR('',#97131,1.); +#97131 = DIRECTION('',(0.,-1.,0.)); +#97132 = ORIENTED_EDGE('',*,*,#97133,.T.); +#97133 = EDGE_CURVE('',#97126,#97102,#97134,.T.); +#97134 = CIRCLE('',#97135,0.75); +#97135 = AXIS2_PLACEMENT_3D('',#97136,#97137,#97138); +#97136 = CARTESIAN_POINT('',(-5.28,-2.655,0.75)); +#97137 = DIRECTION('',(0.,1.,0.)); +#97138 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97139 = ORIENTED_EDGE('',*,*,#97101,.F.); +#97140 = ORIENTED_EDGE('',*,*,#97030,.F.); +#97141 = CYLINDRICAL_SURFACE('',#97142,0.75); +#97142 = AXIS2_PLACEMENT_3D('',#97143,#97144,#97145); +#97143 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97144 = DIRECTION('',(0.,1.,0.)); +#97145 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97146 = ADVANCED_FACE('',(#97147),#97158,.T.); +#97147 = FACE_BOUND('',#97148,.T.); +#97148 = EDGE_LOOP('',(#97149,#97150,#97156,#97157)); +#97149 = ORIENTED_EDGE('',*,*,#96708,.T.); +#97150 = ORIENTED_EDGE('',*,*,#97151,.T.); +#97151 = EDGE_CURVE('',#96709,#97126,#97152,.T.); +#97152 = LINE('',#97153,#97154); +#97153 = CARTESIAN_POINT('',(-4.472624491413,-2.655,0.775392678742)); +#97154 = VECTOR('',#97155,1.); +#97155 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#97156 = ORIENTED_EDGE('',*,*,#97125,.F.); +#97157 = ORIENTED_EDGE('',*,*,#97022,.F.); +#97158 = PLANE('',#97159); +#97159 = AXIS2_PLACEMENT_3D('',#97160,#97161,#97162); +#97160 = CARTESIAN_POINT('',(-4.472624491413,-1.905,0.775392678742)); +#97161 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#97162 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#97163 = ADVANCED_FACE('',(#97164),#97182,.T.); +#97164 = FACE_BOUND('',#97165,.T.); +#97165 = EDGE_LOOP('',(#97166,#97174,#97180,#97181)); +#97166 = ORIENTED_EDGE('',*,*,#97167,.T.); +#97167 = EDGE_CURVE('',#97005,#97168,#97170,.T.); +#97168 = VERTEX_POINT('',#97169); +#97169 = CARTESIAN_POINT('',(-5.045076844804,-2.655,0.664494964169)); +#97170 = LINE('',#97171,#97172); +#97171 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97172 = VECTOR('',#97173,1.); +#97173 = DIRECTION('',(0.,-1.,0.)); +#97174 = ORIENTED_EDGE('',*,*,#97175,.T.); +#97175 = EDGE_CURVE('',#97168,#96912,#97176,.T.); +#97176 = LINE('',#97177,#97178); +#97177 = CARTESIAN_POINT('',(-5.045076844804,-2.655,0.664494964169)); +#97178 = VECTOR('',#97179,1.); +#97179 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97180 = ORIENTED_EDGE('',*,*,#96911,.F.); +#97181 = ORIENTED_EDGE('',*,*,#97013,.F.); +#97182 = PLANE('',#97183); +#97183 = AXIS2_PLACEMENT_3D('',#97184,#97185,#97186); +#97184 = CARTESIAN_POINT('',(-5.045076844804,-1.905,0.664494964169)); +#97185 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97186 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97187 = ADVANCED_FACE('',(#97188),#97207,.F.); +#97188 = FACE_BOUND('',#97189,.F.); +#97189 = EDGE_LOOP('',(#97190,#97191,#97192,#97201)); +#97190 = ORIENTED_EDGE('',*,*,#97004,.T.); +#97191 = ORIENTED_EDGE('',*,*,#97167,.T.); +#97192 = ORIENTED_EDGE('',*,*,#97193,.F.); +#97193 = EDGE_CURVE('',#97194,#97168,#97196,.T.); +#97194 = VERTEX_POINT('',#97195); +#97195 = CARTESIAN_POINT('',(-5.28,-2.655,0.5)); +#97196 = CIRCLE('',#97197,0.25); +#97197 = AXIS2_PLACEMENT_3D('',#97198,#97199,#97200); +#97198 = CARTESIAN_POINT('',(-5.28,-2.655,0.75)); +#97199 = DIRECTION('',(0.,-1.,0.)); +#97200 = DIRECTION('',(0.,0.,-1.)); +#97201 = ORIENTED_EDGE('',*,*,#97202,.F.); +#97202 = EDGE_CURVE('',#96997,#97194,#97203,.T.); +#97203 = LINE('',#97204,#97205); +#97204 = CARTESIAN_POINT('',(-5.28,-1.905,0.5)); +#97205 = VECTOR('',#97206,1.); +#97206 = DIRECTION('',(0.,-1.,0.)); +#97207 = CYLINDRICAL_SURFACE('',#97208,0.25); +#97208 = AXIS2_PLACEMENT_3D('',#97209,#97210,#97211); +#97209 = CARTESIAN_POINT('',(-5.28,-1.905,0.75)); +#97210 = DIRECTION('',(-0.,1.,-0.)); +#97211 = DIRECTION('',(0.,0.,-1.)); +#97212 = ADVANCED_FACE('',(#97213),#97224,.T.); +#97213 = FACE_BOUND('',#97214,.T.); +#97214 = EDGE_LOOP('',(#97215,#97216,#97222,#97223)); +#97215 = ORIENTED_EDGE('',*,*,#97086,.T.); +#97216 = ORIENTED_EDGE('',*,*,#97217,.T.); +#97217 = EDGE_CURVE('',#97079,#97194,#97218,.T.); +#97218 = LINE('',#97219,#97220); +#97219 = CARTESIAN_POINT('',(-5.79,-2.655,0.5)); +#97220 = VECTOR('',#97221,1.); +#97221 = DIRECTION('',(1.,0.,0.)); +#97222 = ORIENTED_EDGE('',*,*,#97202,.F.); +#97223 = ORIENTED_EDGE('',*,*,#96996,.F.); +#97224 = PLANE('',#97225); +#97225 = AXIS2_PLACEMENT_3D('',#97226,#97227,#97228); +#97226 = CARTESIAN_POINT('',(-5.79,-1.905,0.5)); +#97227 = DIRECTION('',(-0.,0.,1.)); +#97228 = DIRECTION('',(1.,0.,0.)); +#97229 = ADVANCED_FACE('',(#97230),#97247,.F.); +#97230 = FACE_BOUND('',#97231,.F.); +#97231 = EDGE_LOOP('',(#97232,#97233,#97234,#97235,#97236,#97237,#97243, + #97244,#97245,#97246)); +#97232 = ORIENTED_EDGE('',*,*,#97078,.T.); +#97233 = ORIENTED_EDGE('',*,*,#97217,.T.); +#97234 = ORIENTED_EDGE('',*,*,#97193,.T.); +#97235 = ORIENTED_EDGE('',*,*,#97175,.T.); +#97236 = ORIENTED_EDGE('',*,*,#96919,.T.); +#97237 = ORIENTED_EDGE('',*,*,#97238,.F.); +#97238 = EDGE_CURVE('',#96717,#96920,#97239,.T.); +#97239 = LINE('',#97240,#97241); +#97240 = CARTESIAN_POINT('',(-4.24,-2.655,0.437372862773)); +#97241 = VECTOR('',#97242,1.); +#97242 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97243 = ORIENTED_EDGE('',*,*,#96716,.T.); +#97244 = ORIENTED_EDGE('',*,*,#97151,.T.); +#97245 = ORIENTED_EDGE('',*,*,#97133,.T.); +#97246 = ORIENTED_EDGE('',*,*,#97109,.T.); +#97247 = PLANE('',#97248); +#97248 = AXIS2_PLACEMENT_3D('',#97249,#97250,#97251); +#97249 = CARTESIAN_POINT('',(-4.091426690538,-2.655,0.874745725546)); +#97250 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97251 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97252 = ADVANCED_FACE('',(#97253),#97264,.T.); +#97253 = FACE_BOUND('',#97254,.T.); +#97254 = EDGE_LOOP('',(#97255,#97256,#97262,#97263)); +#97255 = ORIENTED_EDGE('',*,*,#96725,.F.); +#97256 = ORIENTED_EDGE('',*,*,#97257,.T.); +#97257 = EDGE_CURVE('',#96726,#96929,#97258,.T.); +#97258 = LINE('',#97259,#97260); +#97259 = CARTESIAN_POINT('',(-4.24,-2.775,0.437372862773)); +#97260 = VECTOR('',#97261,1.); +#97261 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97262 = ORIENTED_EDGE('',*,*,#96928,.T.); +#97263 = ORIENTED_EDGE('',*,*,#97238,.F.); +#97264 = PLANE('',#97265); +#97265 = AXIS2_PLACEMENT_3D('',#97266,#97267,#97268); +#97266 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#97267 = DIRECTION('',(-1.,0.,0.)); +#97268 = DIRECTION('',(0.,1.,0.)); +#97269 = ADVANCED_FACE('',(#97270),#97283,.F.); +#97270 = FACE_BOUND('',#97271,.F.); +#97271 = EDGE_LOOP('',(#97272,#97273,#97274,#97275,#97276,#97282)); +#97272 = ORIENTED_EDGE('',*,*,#96733,.T.); +#97273 = ORIENTED_EDGE('',*,*,#97257,.T.); +#97274 = ORIENTED_EDGE('',*,*,#96936,.T.); +#97275 = ORIENTED_EDGE('',*,*,#96846,.T.); +#97276 = ORIENTED_EDGE('',*,*,#97277,.T.); +#97277 = EDGE_CURVE('',#96847,#96791,#97278,.T.); +#97278 = LINE('',#97279,#97280); +#97279 = CARTESIAN_POINT('',(-3.49,-2.775,0.437372862773)); +#97280 = VECTOR('',#97281,1.); +#97281 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97282 = ORIENTED_EDGE('',*,*,#96798,.T.); +#97283 = PLANE('',#97284); +#97284 = AXIS2_PLACEMENT_3D('',#97285,#97286,#97287); +#97285 = CARTESIAN_POINT('',(-4.091426690538,-2.775,0.874745725546)); +#97286 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97287 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97288 = ADVANCED_FACE('',(#97289),#97300,.T.); +#97289 = FACE_BOUND('',#97290,.T.); +#97290 = EDGE_LOOP('',(#97291,#97297,#97298,#97299)); +#97291 = ORIENTED_EDGE('',*,*,#97292,.F.); +#97292 = EDGE_CURVE('',#96855,#96783,#97293,.T.); +#97293 = LINE('',#97294,#97295); +#97294 = CARTESIAN_POINT('',(-3.49,-2.655,0.437372862773)); +#97295 = VECTOR('',#97296,1.); +#97296 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97297 = ORIENTED_EDGE('',*,*,#96854,.F.); +#97298 = ORIENTED_EDGE('',*,*,#97277,.T.); +#97299 = ORIENTED_EDGE('',*,*,#96790,.F.); +#97300 = PLANE('',#97301); +#97301 = AXIS2_PLACEMENT_3D('',#97302,#97303,#97304); +#97302 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97303 = DIRECTION('',(1.,0.,-0.)); +#97304 = DIRECTION('',(0.,-1.,0.)); +#97305 = ADVANCED_FACE('',(#97306),#97312,.F.); +#97306 = FACE_BOUND('',#97307,.F.); +#97307 = EDGE_LOOP('',(#97308,#97309,#97310,#97311)); +#97308 = ORIENTED_EDGE('',*,*,#97292,.F.); +#97309 = ORIENTED_EDGE('',*,*,#96862,.T.); +#97310 = ORIENTED_EDGE('',*,*,#97054,.T.); +#97311 = ORIENTED_EDGE('',*,*,#96782,.T.); +#97312 = PLANE('',#97313); +#97313 = AXIS2_PLACEMENT_3D('',#97314,#97315,#97316); +#97314 = CARTESIAN_POINT('',(-4.091426690538,-2.655,0.874745725546)); +#97315 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97316 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97317 = MANIFOLD_SOLID_BREP('',#97318); +#97318 = CLOSED_SHELL('',(#97319,#97359,#97422,#97446,#97502,#97519, + #97536,#97553,#97570,#97587)); +#97319 = ADVANCED_FACE('',(#97320),#97354,.T.); +#97320 = FACE_BOUND('',#97321,.T.); +#97321 = EDGE_LOOP('',(#97322,#97332,#97340,#97348)); +#97322 = ORIENTED_EDGE('',*,*,#97323,.T.); +#97323 = EDGE_CURVE('',#97324,#97326,#97328,.T.); +#97324 = VERTEX_POINT('',#97325); +#97325 = CARTESIAN_POINT('',(-3.49,0.495,0.93988764291)); +#97326 = VERTEX_POINT('',#97327); +#97327 = CARTESIAN_POINT('',(-3.91,0.495,0.93988764291)); +#97328 = LINE('',#97329,#97330); +#97329 = CARTESIAN_POINT('',(-2.237701336216,0.495,0.93988764291)); +#97330 = VECTOR('',#97331,1.); +#97331 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97332 = ORIENTED_EDGE('',*,*,#97333,.T.); +#97333 = EDGE_CURVE('',#97326,#97334,#97336,.T.); +#97334 = VERTEX_POINT('',#97335); +#97335 = CARTESIAN_POINT('',(-3.91,0.495,1.43988764291)); +#97336 = LINE('',#97337,#97338); +#97337 = CARTESIAN_POINT('',(-3.91,0.495,0.)); +#97338 = VECTOR('',#97339,1.); +#97339 = DIRECTION('',(0.,0.,1.)); +#97340 = ORIENTED_EDGE('',*,*,#97341,.T.); +#97341 = EDGE_CURVE('',#97334,#97342,#97344,.T.); +#97342 = VERTEX_POINT('',#97343); +#97343 = CARTESIAN_POINT('',(-3.49,0.495,1.43988764291)); +#97344 = LINE('',#97345,#97346); +#97345 = CARTESIAN_POINT('',(-4.237701336216,0.495,1.43988764291)); +#97346 = VECTOR('',#97347,1.); +#97347 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97348 = ORIENTED_EDGE('',*,*,#97349,.T.); +#97349 = EDGE_CURVE('',#97342,#97324,#97350,.T.); +#97350 = LINE('',#97351,#97352); +#97351 = CARTESIAN_POINT('',(-3.49,0.495,0.437372862773)); +#97352 = VECTOR('',#97353,1.); +#97353 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97354 = PLANE('',#97355); +#97355 = AXIS2_PLACEMENT_3D('',#97356,#97357,#97358); +#97356 = CARTESIAN_POINT('',(-4.091426690538,0.495,0.874745725546)); +#97357 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97358 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97359 = ADVANCED_FACE('',(#97360),#97417,.T.); +#97360 = FACE_BOUND('',#97361,.T.); +#97361 = EDGE_LOOP('',(#97362,#97363,#97371,#97379,#97387,#97395,#97403, + #97411)); +#97362 = ORIENTED_EDGE('',*,*,#97323,.F.); +#97363 = ORIENTED_EDGE('',*,*,#97364,.T.); +#97364 = EDGE_CURVE('',#97324,#97365,#97367,.T.); +#97365 = VERTEX_POINT('',#97366); +#97366 = CARTESIAN_POINT('',(-3.49,0.375,0.93988764291)); +#97367 = LINE('',#97368,#97369); +#97368 = CARTESIAN_POINT('',(-3.49,1.8725,0.93988764291)); +#97369 = VECTOR('',#97370,1.); +#97370 = DIRECTION('',(0.,-1.,0.)); +#97371 = ORIENTED_EDGE('',*,*,#97372,.F.); +#97372 = EDGE_CURVE('',#97373,#97365,#97375,.T.); +#97373 = VERTEX_POINT('',#97374); +#97374 = CARTESIAN_POINT('',(-2.237701336216,0.375,0.93988764291)); +#97375 = LINE('',#97376,#97377); +#97376 = CARTESIAN_POINT('',(-2.237701336216,0.375,0.93988764291)); +#97377 = VECTOR('',#97378,1.); +#97378 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97379 = ORIENTED_EDGE('',*,*,#97380,.T.); +#97380 = EDGE_CURVE('',#97373,#97381,#97383,.T.); +#97381 = VERTEX_POINT('',#97382); +#97382 = CARTESIAN_POINT('',(-2.237701336216,-0.375,0.93988764291)); +#97383 = LINE('',#97384,#97385); +#97384 = CARTESIAN_POINT('',(-2.237701336216,0.375,0.93988764291)); +#97385 = VECTOR('',#97386,1.); +#97386 = DIRECTION('',(0.,-1.,0.)); +#97387 = ORIENTED_EDGE('',*,*,#97388,.T.); +#97388 = EDGE_CURVE('',#97381,#97389,#97391,.T.); +#97389 = VERTEX_POINT('',#97390); +#97390 = CARTESIAN_POINT('',(-3.49,-0.375,0.93988764291)); +#97391 = LINE('',#97392,#97393); +#97392 = CARTESIAN_POINT('',(-2.237701336216,-0.375,0.93988764291)); +#97393 = VECTOR('',#97394,1.); +#97394 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97395 = ORIENTED_EDGE('',*,*,#97396,.T.); +#97396 = EDGE_CURVE('',#97389,#97397,#97399,.T.); +#97397 = VERTEX_POINT('',#97398); +#97398 = CARTESIAN_POINT('',(-3.49,-0.495,0.93988764291)); +#97399 = LINE('',#97400,#97401); +#97400 = CARTESIAN_POINT('',(-3.49,1.8725,0.93988764291)); +#97401 = VECTOR('',#97402,1.); +#97402 = DIRECTION('',(0.,-1.,0.)); +#97403 = ORIENTED_EDGE('',*,*,#97404,.T.); +#97404 = EDGE_CURVE('',#97397,#97405,#97407,.T.); +#97405 = VERTEX_POINT('',#97406); +#97406 = CARTESIAN_POINT('',(-3.91,-0.495,0.93988764291)); +#97407 = LINE('',#97408,#97409); +#97408 = CARTESIAN_POINT('',(-2.237701336216,-0.495,0.93988764291)); +#97409 = VECTOR('',#97410,1.); +#97410 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97411 = ORIENTED_EDGE('',*,*,#97412,.T.); +#97412 = EDGE_CURVE('',#97405,#97326,#97413,.T.); +#97413 = LINE('',#97414,#97415); +#97414 = CARTESIAN_POINT('',(-3.91,5.551115123126E-17,0.93988764291)); +#97415 = VECTOR('',#97416,1.); +#97416 = DIRECTION('',(0.,1.,-0.)); +#97417 = PLANE('',#97418); +#97418 = AXIS2_PLACEMENT_3D('',#97419,#97420,#97421); +#97419 = CARTESIAN_POINT('',(-2.237701336216,0.495,0.93988764291)); +#97420 = DIRECTION('',(-1.110223024625E-16,-0.,-1.)); +#97421 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97422 = ADVANCED_FACE('',(#97423),#97441,.T.); +#97423 = FACE_BOUND('',#97424,.T.); +#97424 = EDGE_LOOP('',(#97425,#97426,#97434,#97440)); +#97425 = ORIENTED_EDGE('',*,*,#97349,.F.); +#97426 = ORIENTED_EDGE('',*,*,#97427,.F.); +#97427 = EDGE_CURVE('',#97428,#97342,#97430,.T.); +#97428 = VERTEX_POINT('',#97429); +#97429 = CARTESIAN_POINT('',(-3.49,0.375,1.43988764291)); +#97430 = LINE('',#97431,#97432); +#97431 = CARTESIAN_POINT('',(-3.49,1.8725,1.43988764291)); +#97432 = VECTOR('',#97433,1.); +#97433 = DIRECTION('',(-0.,1.,0.)); +#97434 = ORIENTED_EDGE('',*,*,#97435,.T.); +#97435 = EDGE_CURVE('',#97428,#97365,#97436,.T.); +#97436 = LINE('',#97437,#97438); +#97437 = CARTESIAN_POINT('',(-3.49,0.375,0.437372862773)); +#97438 = VECTOR('',#97439,1.); +#97439 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97440 = ORIENTED_EDGE('',*,*,#97364,.F.); +#97441 = PLANE('',#97442); +#97442 = AXIS2_PLACEMENT_3D('',#97443,#97444,#97445); +#97443 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97444 = DIRECTION('',(1.,0.,-0.)); +#97445 = DIRECTION('',(0.,-1.,0.)); +#97446 = ADVANCED_FACE('',(#97447),#97497,.T.); +#97447 = FACE_BOUND('',#97448,.T.); +#97448 = EDGE_LOOP('',(#97449,#97450,#97458,#97466,#97474,#97482,#97490, + #97496)); +#97449 = ORIENTED_EDGE('',*,*,#97341,.F.); +#97450 = ORIENTED_EDGE('',*,*,#97451,.T.); +#97451 = EDGE_CURVE('',#97334,#97452,#97454,.T.); +#97452 = VERTEX_POINT('',#97453); +#97453 = CARTESIAN_POINT('',(-3.91,-0.495,1.43988764291)); +#97454 = LINE('',#97455,#97456); +#97455 = CARTESIAN_POINT('',(-3.91,5.551115123126E-17,1.43988764291)); +#97456 = VECTOR('',#97457,1.); +#97457 = DIRECTION('',(0.,-1.,0.)); +#97458 = ORIENTED_EDGE('',*,*,#97459,.T.); +#97459 = EDGE_CURVE('',#97452,#97460,#97462,.T.); +#97460 = VERTEX_POINT('',#97461); +#97461 = CARTESIAN_POINT('',(-3.49,-0.495,1.43988764291)); +#97462 = LINE('',#97463,#97464); +#97463 = CARTESIAN_POINT('',(-4.237701336216,-0.495,1.43988764291)); +#97464 = VECTOR('',#97465,1.); +#97465 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97466 = ORIENTED_EDGE('',*,*,#97467,.T.); +#97467 = EDGE_CURVE('',#97460,#97468,#97470,.T.); +#97468 = VERTEX_POINT('',#97469); +#97469 = CARTESIAN_POINT('',(-3.49,-0.375,1.43988764291)); +#97470 = LINE('',#97471,#97472); +#97471 = CARTESIAN_POINT('',(-3.49,1.8725,1.43988764291)); +#97472 = VECTOR('',#97473,1.); +#97473 = DIRECTION('',(-0.,1.,0.)); +#97474 = ORIENTED_EDGE('',*,*,#97475,.T.); +#97475 = EDGE_CURVE('',#97468,#97476,#97478,.T.); +#97476 = VERTEX_POINT('',#97477); +#97477 = CARTESIAN_POINT('',(-2.237701336216,-0.375,1.43988764291)); +#97478 = LINE('',#97479,#97480); +#97479 = CARTESIAN_POINT('',(-4.237701336216,-0.375,1.43988764291)); +#97480 = VECTOR('',#97481,1.); +#97481 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97482 = ORIENTED_EDGE('',*,*,#97483,.F.); +#97483 = EDGE_CURVE('',#97484,#97476,#97486,.T.); +#97484 = VERTEX_POINT('',#97485); +#97485 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97486 = LINE('',#97487,#97488); +#97487 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97488 = VECTOR('',#97489,1.); +#97489 = DIRECTION('',(0.,-1.,0.)); +#97490 = ORIENTED_EDGE('',*,*,#97491,.F.); +#97491 = EDGE_CURVE('',#97428,#97484,#97492,.T.); +#97492 = LINE('',#97493,#97494); +#97493 = CARTESIAN_POINT('',(-4.237701336216,0.375,1.43988764291)); +#97494 = VECTOR('',#97495,1.); +#97495 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97496 = ORIENTED_EDGE('',*,*,#97427,.T.); +#97497 = PLANE('',#97498); +#97498 = AXIS2_PLACEMENT_3D('',#97499,#97500,#97501); +#97499 = CARTESIAN_POINT('',(-4.237701336216,0.495,1.43988764291)); +#97500 = DIRECTION('',(1.110223024625E-16,0.,1.)); +#97501 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97502 = ADVANCED_FACE('',(#97503),#97514,.T.); +#97503 = FACE_BOUND('',#97504,.T.); +#97504 = EDGE_LOOP('',(#97505,#97506,#97512,#97513)); +#97505 = ORIENTED_EDGE('',*,*,#97412,.F.); +#97506 = ORIENTED_EDGE('',*,*,#97507,.T.); +#97507 = EDGE_CURVE('',#97405,#97452,#97508,.T.); +#97508 = LINE('',#97509,#97510); +#97509 = CARTESIAN_POINT('',(-3.91,-0.495,0.)); +#97510 = VECTOR('',#97511,1.); +#97511 = DIRECTION('',(0.,0.,1.)); +#97512 = ORIENTED_EDGE('',*,*,#97451,.F.); +#97513 = ORIENTED_EDGE('',*,*,#97333,.F.); +#97514 = PLANE('',#97515); +#97515 = AXIS2_PLACEMENT_3D('',#97516,#97517,#97518); +#97516 = CARTESIAN_POINT('',(-3.91,-0.495,0.)); +#97517 = DIRECTION('',(-1.,0.,0.)); +#97518 = DIRECTION('',(0.,1.,0.)); +#97519 = ADVANCED_FACE('',(#97520),#97531,.F.); +#97520 = FACE_BOUND('',#97521,.F.); +#97521 = EDGE_LOOP('',(#97522,#97523,#97524,#97525)); +#97522 = ORIENTED_EDGE('',*,*,#97404,.T.); +#97523 = ORIENTED_EDGE('',*,*,#97507,.T.); +#97524 = ORIENTED_EDGE('',*,*,#97459,.T.); +#97525 = ORIENTED_EDGE('',*,*,#97526,.T.); +#97526 = EDGE_CURVE('',#97460,#97397,#97527,.T.); +#97527 = LINE('',#97528,#97529); +#97528 = CARTESIAN_POINT('',(-3.49,-0.495,0.437372862773)); +#97529 = VECTOR('',#97530,1.); +#97530 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97531 = PLANE('',#97532); +#97532 = AXIS2_PLACEMENT_3D('',#97533,#97534,#97535); +#97533 = CARTESIAN_POINT('',(-4.091426690538,-0.495,0.874745725546)); +#97534 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97535 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97536 = ADVANCED_FACE('',(#97537),#97548,.T.); +#97537 = FACE_BOUND('',#97538,.T.); +#97538 = EDGE_LOOP('',(#97539,#97545,#97546,#97547)); +#97539 = ORIENTED_EDGE('',*,*,#97540,.F.); +#97540 = EDGE_CURVE('',#97468,#97389,#97541,.T.); +#97541 = LINE('',#97542,#97543); +#97542 = CARTESIAN_POINT('',(-3.49,-0.375,0.437372862773)); +#97543 = VECTOR('',#97544,1.); +#97544 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97545 = ORIENTED_EDGE('',*,*,#97467,.F.); +#97546 = ORIENTED_EDGE('',*,*,#97526,.T.); +#97547 = ORIENTED_EDGE('',*,*,#97396,.F.); +#97548 = PLANE('',#97549); +#97549 = AXIS2_PLACEMENT_3D('',#97550,#97551,#97552); +#97550 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97551 = DIRECTION('',(1.,0.,-0.)); +#97552 = DIRECTION('',(0.,-1.,0.)); +#97553 = ADVANCED_FACE('',(#97554),#97565,.F.); +#97554 = FACE_BOUND('',#97555,.F.); +#97555 = EDGE_LOOP('',(#97556,#97557,#97558,#97564)); +#97556 = ORIENTED_EDGE('',*,*,#97540,.F.); +#97557 = ORIENTED_EDGE('',*,*,#97475,.T.); +#97558 = ORIENTED_EDGE('',*,*,#97559,.T.); +#97559 = EDGE_CURVE('',#97476,#97381,#97560,.T.); +#97560 = LINE('',#97561,#97562); +#97561 = CARTESIAN_POINT('',(-2.237701336216,-0.375,1.43988764291)); +#97562 = VECTOR('',#97563,1.); +#97563 = DIRECTION('',(0.,0.,-1.)); +#97564 = ORIENTED_EDGE('',*,*,#97388,.T.); +#97565 = PLANE('',#97566); +#97566 = AXIS2_PLACEMENT_3D('',#97567,#97568,#97569); +#97567 = CARTESIAN_POINT('',(-4.091426690538,-0.375,0.874745725546)); +#97568 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97569 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97570 = ADVANCED_FACE('',(#97571),#97582,.T.); +#97571 = FACE_BOUND('',#97572,.T.); +#97572 = EDGE_LOOP('',(#97573,#97574,#97575,#97576)); +#97573 = ORIENTED_EDGE('',*,*,#97483,.T.); +#97574 = ORIENTED_EDGE('',*,*,#97559,.T.); +#97575 = ORIENTED_EDGE('',*,*,#97380,.F.); +#97576 = ORIENTED_EDGE('',*,*,#97577,.F.); +#97577 = EDGE_CURVE('',#97484,#97373,#97578,.T.); +#97578 = LINE('',#97579,#97580); +#97579 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97580 = VECTOR('',#97581,1.); +#97581 = DIRECTION('',(0.,0.,-1.)); +#97582 = PLANE('',#97583); +#97583 = AXIS2_PLACEMENT_3D('',#97584,#97585,#97586); +#97584 = CARTESIAN_POINT('',(-2.237701336216,0.375,1.43988764291)); +#97585 = DIRECTION('',(1.,0.,0.)); +#97586 = DIRECTION('',(0.,0.,-1.)); +#97587 = ADVANCED_FACE('',(#97588),#97594,.T.); +#97588 = FACE_BOUND('',#97589,.T.); +#97589 = EDGE_LOOP('',(#97590,#97591,#97592,#97593)); +#97590 = ORIENTED_EDGE('',*,*,#97435,.F.); +#97591 = ORIENTED_EDGE('',*,*,#97491,.T.); +#97592 = ORIENTED_EDGE('',*,*,#97577,.T.); +#97593 = ORIENTED_EDGE('',*,*,#97372,.T.); +#97594 = PLANE('',#97595); +#97595 = AXIS2_PLACEMENT_3D('',#97596,#97597,#97598); +#97596 = CARTESIAN_POINT('',(-4.091426690538,0.375,0.874745725546)); +#97597 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97598 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97599 = MANIFOLD_SOLID_BREP('',#97600); +#97600 = CLOSED_SHELL('',(#97601,#97659,#97725,#97781,#97805,#97861, + #97920,#97937,#97954,#98021,#98038,#98069,#98093,#98118,#98135, + #98159,#98184,#98201,#98224,#98241,#98260,#98277)); +#97601 = ADVANCED_FACE('',(#97602),#97654,.T.); +#97602 = FACE_BOUND('',#97603,.T.); +#97603 = EDGE_LOOP('',(#97604,#97615,#97623,#97632,#97640,#97648)); +#97604 = ORIENTED_EDGE('',*,*,#97605,.T.); +#97605 = EDGE_CURVE('',#97606,#97608,#97610,.T.); +#97606 = VERTEX_POINT('',#97607); +#97607 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.93988764291)); +#97608 = VERTEX_POINT('',#97609); +#97609 = CARTESIAN_POINT('',(-4.24,2.775,0.939877074976)); +#97610 = CIRCLE('',#97611,0.25); +#97611 = AXIS2_PLACEMENT_3D('',#97612,#97613,#97614); +#97612 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97613 = DIRECTION('',(0.,-1.,0.)); +#97614 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97615 = ORIENTED_EDGE('',*,*,#97616,.T.); +#97616 = EDGE_CURVE('',#97608,#97617,#97619,.T.); +#97617 = VERTEX_POINT('',#97618); +#97618 = CARTESIAN_POINT('',(-4.24,2.775,1.439884120332)); +#97619 = LINE('',#97620,#97621); +#97620 = CARTESIAN_POINT('',(-4.24,2.775,0.437372862773)); +#97621 = VECTOR('',#97622,1.); +#97622 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97623 = ORIENTED_EDGE('',*,*,#97624,.T.); +#97624 = EDGE_CURVE('',#97617,#97625,#97627,.T.); +#97625 = VERTEX_POINT('',#97626); +#97626 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97627 = CIRCLE('',#97628,0.75); +#97628 = AXIS2_PLACEMENT_3D('',#97629,#97630,#97631); +#97629 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97630 = DIRECTION('',(0.,1.,0.)); +#97631 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97632 = ORIENTED_EDGE('',*,*,#97633,.T.); +#97633 = EDGE_CURVE('',#97625,#97634,#97636,.T.); +#97634 = VERTEX_POINT('',#97635); +#97635 = CARTESIAN_POINT('',(-3.49,2.775,1.43988764291)); +#97636 = LINE('',#97637,#97638); +#97637 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97638 = VECTOR('',#97639,1.); +#97639 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97640 = ORIENTED_EDGE('',*,*,#97641,.T.); +#97641 = EDGE_CURVE('',#97634,#97642,#97644,.T.); +#97642 = VERTEX_POINT('',#97643); +#97643 = CARTESIAN_POINT('',(-3.49,2.775,0.93988764291)); +#97644 = LINE('',#97645,#97646); +#97645 = CARTESIAN_POINT('',(-3.49,2.775,0.437372862773)); +#97646 = VECTOR('',#97647,1.); +#97647 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97648 = ORIENTED_EDGE('',*,*,#97649,.T.); +#97649 = EDGE_CURVE('',#97642,#97606,#97650,.T.); +#97650 = LINE('',#97651,#97652); +#97651 = CARTESIAN_POINT('',(-2.237701336216,2.775,0.93988764291)); +#97652 = VECTOR('',#97653,1.); +#97653 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97654 = PLANE('',#97655); +#97655 = AXIS2_PLACEMENT_3D('',#97656,#97657,#97658); +#97656 = CARTESIAN_POINT('',(-4.091426690538,2.775,0.874745725546)); +#97657 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97658 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97659 = ADVANCED_FACE('',(#97660),#97720,.F.); +#97660 = FACE_BOUND('',#97661,.F.); +#97661 = EDGE_LOOP('',(#97662,#97670,#97679,#97687,#97696,#97704,#97713, + #97719)); +#97662 = ORIENTED_EDGE('',*,*,#97663,.F.); +#97663 = EDGE_CURVE('',#97664,#97608,#97666,.T.); +#97664 = VERTEX_POINT('',#97665); +#97665 = CARTESIAN_POINT('',(-4.24,2.655,0.939877074976)); +#97666 = LINE('',#97667,#97668); +#97667 = CARTESIAN_POINT('',(-4.24,2.775,0.939877074976)); +#97668 = VECTOR('',#97669,1.); +#97669 = DIRECTION('',(-0.,1.,-0.)); +#97670 = ORIENTED_EDGE('',*,*,#97671,.T.); +#97671 = EDGE_CURVE('',#97664,#97672,#97674,.T.); +#97672 = VERTEX_POINT('',#97673); +#97673 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#97674 = CIRCLE('',#97675,0.25); +#97675 = AXIS2_PLACEMENT_3D('',#97676,#97677,#97678); +#97676 = CARTESIAN_POINT('',(-4.237701336216,2.655,0.68988764291)); +#97677 = DIRECTION('',(0.,-1.,0.)); +#97678 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97679 = ORIENTED_EDGE('',*,*,#97680,.T.); +#97680 = EDGE_CURVE('',#97672,#97681,#97683,.T.); +#97681 = VERTEX_POINT('',#97682); +#97682 = CARTESIAN_POINT('',(-4.472624491413,1.905,0.775392678742)); +#97683 = LINE('',#97684,#97685); +#97684 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#97685 = VECTOR('',#97686,1.); +#97686 = DIRECTION('',(0.,-1.,0.)); +#97687 = ORIENTED_EDGE('',*,*,#97688,.F.); +#97688 = EDGE_CURVE('',#97689,#97681,#97691,.T.); +#97689 = VERTEX_POINT('',#97690); +#97690 = CARTESIAN_POINT('',(-4.24,1.905,0.939877074976)); +#97691 = CIRCLE('',#97692,0.25); +#97692 = AXIS2_PLACEMENT_3D('',#97693,#97694,#97695); +#97693 = CARTESIAN_POINT('',(-4.237701336216,1.905,0.68988764291)); +#97694 = DIRECTION('',(0.,-1.,0.)); +#97695 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97696 = ORIENTED_EDGE('',*,*,#97697,.F.); +#97697 = EDGE_CURVE('',#97698,#97689,#97700,.T.); +#97698 = VERTEX_POINT('',#97699); +#97699 = CARTESIAN_POINT('',(-4.24,1.785,0.939877074976)); +#97700 = LINE('',#97701,#97702); +#97701 = CARTESIAN_POINT('',(-4.24,2.775,0.939877074976)); +#97702 = VECTOR('',#97703,1.); +#97703 = DIRECTION('',(-0.,1.,-0.)); +#97704 = ORIENTED_EDGE('',*,*,#97705,.F.); +#97705 = EDGE_CURVE('',#97706,#97698,#97708,.T.); +#97706 = VERTEX_POINT('',#97707); +#97707 = CARTESIAN_POINT('',(-4.237701336216,1.785,0.93988764291)); +#97708 = CIRCLE('',#97709,0.25); +#97709 = AXIS2_PLACEMENT_3D('',#97710,#97711,#97712); +#97710 = CARTESIAN_POINT('',(-4.237701336216,1.785,0.68988764291)); +#97711 = DIRECTION('',(0.,-1.,0.)); +#97712 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97713 = ORIENTED_EDGE('',*,*,#97714,.F.); +#97714 = EDGE_CURVE('',#97606,#97706,#97715,.T.); +#97715 = LINE('',#97716,#97717); +#97716 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.93988764291)); +#97717 = VECTOR('',#97718,1.); +#97718 = DIRECTION('',(0.,-1.,0.)); +#97719 = ORIENTED_EDGE('',*,*,#97605,.T.); +#97720 = CYLINDRICAL_SURFACE('',#97721,0.25); +#97721 = AXIS2_PLACEMENT_3D('',#97722,#97723,#97724); +#97722 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97723 = DIRECTION('',(-0.,1.,-0.)); +#97724 = DIRECTION('',(-3.5527136788E-15,0.,1.)); +#97725 = ADVANCED_FACE('',(#97726),#97776,.T.); +#97726 = FACE_BOUND('',#97727,.T.); +#97727 = EDGE_LOOP('',(#97728,#97729,#97737,#97745,#97753,#97761,#97769, + #97775)); +#97728 = ORIENTED_EDGE('',*,*,#97649,.F.); +#97729 = ORIENTED_EDGE('',*,*,#97730,.T.); +#97730 = EDGE_CURVE('',#97642,#97731,#97733,.T.); +#97731 = VERTEX_POINT('',#97732); +#97732 = CARTESIAN_POINT('',(-3.49,2.655,0.93988764291)); +#97733 = LINE('',#97734,#97735); +#97734 = CARTESIAN_POINT('',(-3.49,3.0125,0.93988764291)); +#97735 = VECTOR('',#97736,1.); +#97736 = DIRECTION('',(0.,-1.,0.)); +#97737 = ORIENTED_EDGE('',*,*,#97738,.F.); +#97738 = EDGE_CURVE('',#97739,#97731,#97741,.T.); +#97739 = VERTEX_POINT('',#97740); +#97740 = CARTESIAN_POINT('',(-2.237701336216,2.655,0.93988764291)); +#97741 = LINE('',#97742,#97743); +#97742 = CARTESIAN_POINT('',(-2.237701336216,2.655,0.93988764291)); +#97743 = VECTOR('',#97744,1.); +#97744 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97745 = ORIENTED_EDGE('',*,*,#97746,.T.); +#97746 = EDGE_CURVE('',#97739,#97747,#97749,.T.); +#97747 = VERTEX_POINT('',#97748); +#97748 = CARTESIAN_POINT('',(-2.237701336216,1.905,0.93988764291)); +#97749 = LINE('',#97750,#97751); +#97750 = CARTESIAN_POINT('',(-2.237701336216,2.655,0.93988764291)); +#97751 = VECTOR('',#97752,1.); +#97752 = DIRECTION('',(0.,-1.,0.)); +#97753 = ORIENTED_EDGE('',*,*,#97754,.T.); +#97754 = EDGE_CURVE('',#97747,#97755,#97757,.T.); +#97755 = VERTEX_POINT('',#97756); +#97756 = CARTESIAN_POINT('',(-3.49,1.905,0.93988764291)); +#97757 = LINE('',#97758,#97759); +#97758 = CARTESIAN_POINT('',(-2.237701336216,1.905,0.93988764291)); +#97759 = VECTOR('',#97760,1.); +#97760 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97761 = ORIENTED_EDGE('',*,*,#97762,.T.); +#97762 = EDGE_CURVE('',#97755,#97763,#97765,.T.); +#97763 = VERTEX_POINT('',#97764); +#97764 = CARTESIAN_POINT('',(-3.49,1.785,0.93988764291)); +#97765 = LINE('',#97766,#97767); +#97766 = CARTESIAN_POINT('',(-3.49,3.0125,0.93988764291)); +#97767 = VECTOR('',#97768,1.); +#97768 = DIRECTION('',(0.,-1.,0.)); +#97769 = ORIENTED_EDGE('',*,*,#97770,.T.); +#97770 = EDGE_CURVE('',#97763,#97706,#97771,.T.); +#97771 = LINE('',#97772,#97773); +#97772 = CARTESIAN_POINT('',(-2.237701336216,1.785,0.93988764291)); +#97773 = VECTOR('',#97774,1.); +#97774 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97775 = ORIENTED_EDGE('',*,*,#97714,.F.); +#97776 = PLANE('',#97777); +#97777 = AXIS2_PLACEMENT_3D('',#97778,#97779,#97780); +#97778 = CARTESIAN_POINT('',(-2.237701336216,2.775,0.93988764291)); +#97779 = DIRECTION('',(-1.110223024625E-16,-0.,-1.)); +#97780 = DIRECTION('',(-1.,0.,1.110223024625E-16)); +#97781 = ADVANCED_FACE('',(#97782),#97800,.T.); +#97782 = FACE_BOUND('',#97783,.T.); +#97783 = EDGE_LOOP('',(#97784,#97785,#97793,#97799)); +#97784 = ORIENTED_EDGE('',*,*,#97641,.F.); +#97785 = ORIENTED_EDGE('',*,*,#97786,.F.); +#97786 = EDGE_CURVE('',#97787,#97634,#97789,.T.); +#97787 = VERTEX_POINT('',#97788); +#97788 = CARTESIAN_POINT('',(-3.49,2.655,1.43988764291)); +#97789 = LINE('',#97790,#97791); +#97790 = CARTESIAN_POINT('',(-3.49,3.0125,1.43988764291)); +#97791 = VECTOR('',#97792,1.); +#97792 = DIRECTION('',(-0.,1.,0.)); +#97793 = ORIENTED_EDGE('',*,*,#97794,.T.); +#97794 = EDGE_CURVE('',#97787,#97731,#97795,.T.); +#97795 = LINE('',#97796,#97797); +#97796 = CARTESIAN_POINT('',(-3.49,2.655,0.437372862773)); +#97797 = VECTOR('',#97798,1.); +#97798 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#97799 = ORIENTED_EDGE('',*,*,#97730,.F.); +#97800 = PLANE('',#97801); +#97801 = AXIS2_PLACEMENT_3D('',#97802,#97803,#97804); +#97802 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#97803 = DIRECTION('',(1.,0.,-0.)); +#97804 = DIRECTION('',(0.,-1.,0.)); +#97805 = ADVANCED_FACE('',(#97806),#97856,.T.); +#97806 = FACE_BOUND('',#97807,.T.); +#97807 = EDGE_LOOP('',(#97808,#97809,#97817,#97825,#97833,#97841,#97849, + #97855)); +#97808 = ORIENTED_EDGE('',*,*,#97633,.F.); +#97809 = ORIENTED_EDGE('',*,*,#97810,.T.); +#97810 = EDGE_CURVE('',#97625,#97811,#97813,.T.); +#97811 = VERTEX_POINT('',#97812); +#97812 = CARTESIAN_POINT('',(-4.237701336216,1.785,1.43988764291)); +#97813 = LINE('',#97814,#97815); +#97814 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97815 = VECTOR('',#97816,1.); +#97816 = DIRECTION('',(0.,-1.,0.)); +#97817 = ORIENTED_EDGE('',*,*,#97818,.T.); +#97818 = EDGE_CURVE('',#97811,#97819,#97821,.T.); +#97819 = VERTEX_POINT('',#97820); +#97820 = CARTESIAN_POINT('',(-3.49,1.785,1.43988764291)); +#97821 = LINE('',#97822,#97823); +#97822 = CARTESIAN_POINT('',(-4.237701336216,1.785,1.43988764291)); +#97823 = VECTOR('',#97824,1.); +#97824 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97825 = ORIENTED_EDGE('',*,*,#97826,.T.); +#97826 = EDGE_CURVE('',#97819,#97827,#97829,.T.); +#97827 = VERTEX_POINT('',#97828); +#97828 = CARTESIAN_POINT('',(-3.49,1.905,1.43988764291)); +#97829 = LINE('',#97830,#97831); +#97830 = CARTESIAN_POINT('',(-3.49,3.0125,1.43988764291)); +#97831 = VECTOR('',#97832,1.); +#97832 = DIRECTION('',(-0.,1.,0.)); +#97833 = ORIENTED_EDGE('',*,*,#97834,.T.); +#97834 = EDGE_CURVE('',#97827,#97835,#97837,.T.); +#97835 = VERTEX_POINT('',#97836); +#97836 = CARTESIAN_POINT('',(-2.237701336216,1.905,1.43988764291)); +#97837 = LINE('',#97838,#97839); +#97838 = CARTESIAN_POINT('',(-4.237701336216,1.905,1.43988764291)); +#97839 = VECTOR('',#97840,1.); +#97840 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97841 = ORIENTED_EDGE('',*,*,#97842,.F.); +#97842 = EDGE_CURVE('',#97843,#97835,#97845,.T.); +#97843 = VERTEX_POINT('',#97844); +#97844 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#97845 = LINE('',#97846,#97847); +#97846 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#97847 = VECTOR('',#97848,1.); +#97848 = DIRECTION('',(0.,-1.,0.)); +#97849 = ORIENTED_EDGE('',*,*,#97850,.F.); +#97850 = EDGE_CURVE('',#97787,#97843,#97851,.T.); +#97851 = LINE('',#97852,#97853); +#97852 = CARTESIAN_POINT('',(-4.237701336216,2.655,1.43988764291)); +#97853 = VECTOR('',#97854,1.); +#97854 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97855 = ORIENTED_EDGE('',*,*,#97786,.T.); +#97856 = PLANE('',#97857); +#97857 = AXIS2_PLACEMENT_3D('',#97858,#97859,#97860); +#97858 = CARTESIAN_POINT('',(-4.237701336216,2.775,1.43988764291)); +#97859 = DIRECTION('',(1.110223024625E-16,0.,1.)); +#97860 = DIRECTION('',(1.,0.,-1.110223024625E-16)); +#97861 = ADVANCED_FACE('',(#97862),#97915,.T.); +#97862 = FACE_BOUND('',#97863,.T.); +#97863 = EDGE_LOOP('',(#97864,#97865,#97873,#97882,#97890,#97899,#97907, + #97914)); +#97864 = ORIENTED_EDGE('',*,*,#97624,.F.); +#97865 = ORIENTED_EDGE('',*,*,#97866,.F.); +#97866 = EDGE_CURVE('',#97867,#97617,#97869,.T.); +#97867 = VERTEX_POINT('',#97868); +#97868 = CARTESIAN_POINT('',(-4.24,2.655,1.439884120332)); +#97869 = LINE('',#97870,#97871); +#97870 = CARTESIAN_POINT('',(-4.24,2.775,1.439884120332)); +#97871 = VECTOR('',#97872,1.); +#97872 = DIRECTION('',(0.,1.,0.)); +#97873 = ORIENTED_EDGE('',*,*,#97874,.F.); +#97874 = EDGE_CURVE('',#97875,#97867,#97877,.T.); +#97875 = VERTEX_POINT('',#97876); +#97876 = CARTESIAN_POINT('',(-4.942470801806,2.655,0.946402750404)); +#97877 = CIRCLE('',#97878,0.75); +#97878 = AXIS2_PLACEMENT_3D('',#97879,#97880,#97881); +#97879 = CARTESIAN_POINT('',(-4.237701336216,2.655,0.68988764291)); +#97880 = DIRECTION('',(0.,1.,0.)); +#97881 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97882 = ORIENTED_EDGE('',*,*,#97883,.T.); +#97883 = EDGE_CURVE('',#97875,#97884,#97886,.T.); +#97884 = VERTEX_POINT('',#97885); +#97885 = CARTESIAN_POINT('',(-4.942470801806,1.905,0.946402750404)); +#97886 = LINE('',#97887,#97888); +#97887 = CARTESIAN_POINT('',(-4.942470801806,2.655,0.946402750404)); +#97888 = VECTOR('',#97889,1.); +#97889 = DIRECTION('',(0.,-1.,0.)); +#97890 = ORIENTED_EDGE('',*,*,#97891,.T.); +#97891 = EDGE_CURVE('',#97884,#97892,#97894,.T.); +#97892 = VERTEX_POINT('',#97893); +#97893 = CARTESIAN_POINT('',(-4.24,1.905,1.439884120332)); +#97894 = CIRCLE('',#97895,0.75); +#97895 = AXIS2_PLACEMENT_3D('',#97896,#97897,#97898); +#97896 = CARTESIAN_POINT('',(-4.237701336216,1.905,0.68988764291)); +#97897 = DIRECTION('',(0.,1.,0.)); +#97898 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97899 = ORIENTED_EDGE('',*,*,#97900,.F.); +#97900 = EDGE_CURVE('',#97901,#97892,#97903,.T.); +#97901 = VERTEX_POINT('',#97902); +#97902 = CARTESIAN_POINT('',(-4.24,1.785,1.439884120332)); +#97903 = LINE('',#97904,#97905); +#97904 = CARTESIAN_POINT('',(-4.24,2.775,1.439884120332)); +#97905 = VECTOR('',#97906,1.); +#97906 = DIRECTION('',(0.,1.,0.)); +#97907 = ORIENTED_EDGE('',*,*,#97908,.T.); +#97908 = EDGE_CURVE('',#97901,#97811,#97909,.T.); +#97909 = CIRCLE('',#97910,0.75); +#97910 = AXIS2_PLACEMENT_3D('',#97911,#97912,#97913); +#97911 = CARTESIAN_POINT('',(-4.237701336216,1.785,0.68988764291)); +#97912 = DIRECTION('',(0.,1.,0.)); +#97913 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97914 = ORIENTED_EDGE('',*,*,#97810,.F.); +#97915 = CYLINDRICAL_SURFACE('',#97916,0.75); +#97916 = AXIS2_PLACEMENT_3D('',#97917,#97918,#97919); +#97917 = CARTESIAN_POINT('',(-4.237701336216,2.775,0.68988764291)); +#97918 = DIRECTION('',(0.,1.,0.)); +#97919 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#97920 = ADVANCED_FACE('',(#97921),#97932,.T.); +#97921 = FACE_BOUND('',#97922,.T.); +#97922 = EDGE_LOOP('',(#97923,#97924,#97925,#97931)); +#97923 = ORIENTED_EDGE('',*,*,#97616,.F.); +#97924 = ORIENTED_EDGE('',*,*,#97663,.F.); +#97925 = ORIENTED_EDGE('',*,*,#97926,.T.); +#97926 = EDGE_CURVE('',#97664,#97867,#97927,.T.); +#97927 = LINE('',#97928,#97929); +#97928 = CARTESIAN_POINT('',(-4.24,2.655,0.437372862773)); +#97929 = VECTOR('',#97930,1.); +#97930 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97931 = ORIENTED_EDGE('',*,*,#97866,.T.); +#97932 = PLANE('',#97933); +#97933 = AXIS2_PLACEMENT_3D('',#97934,#97935,#97936); +#97934 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#97935 = DIRECTION('',(-1.,0.,0.)); +#97936 = DIRECTION('',(0.,1.,0.)); +#97937 = ADVANCED_FACE('',(#97938),#97949,.T.); +#97938 = FACE_BOUND('',#97939,.T.); +#97939 = EDGE_LOOP('',(#97940,#97941,#97942,#97948)); +#97940 = ORIENTED_EDGE('',*,*,#97794,.F.); +#97941 = ORIENTED_EDGE('',*,*,#97850,.T.); +#97942 = ORIENTED_EDGE('',*,*,#97943,.T.); +#97943 = EDGE_CURVE('',#97843,#97739,#97944,.T.); +#97944 = LINE('',#97945,#97946); +#97945 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#97946 = VECTOR('',#97947,1.); +#97947 = DIRECTION('',(0.,0.,-1.)); +#97948 = ORIENTED_EDGE('',*,*,#97738,.T.); +#97949 = PLANE('',#97950); +#97950 = AXIS2_PLACEMENT_3D('',#97951,#97952,#97953); +#97951 = CARTESIAN_POINT('',(-4.091426690538,2.655,0.874745725546)); +#97952 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#97953 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#97954 = ADVANCED_FACE('',(#97955),#98016,.T.); +#97955 = FACE_BOUND('',#97956,.T.); +#97956 = EDGE_LOOP('',(#97957,#97967,#97975,#97984,#97990,#97991,#97992, + #97993,#98001,#98010)); +#97957 = ORIENTED_EDGE('',*,*,#97958,.T.); +#97958 = EDGE_CURVE('',#97959,#97961,#97963,.T.); +#97959 = VERTEX_POINT('',#97960); +#97960 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#97961 = VERTEX_POINT('',#97962); +#97962 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#97963 = LINE('',#97964,#97965); +#97964 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#97965 = VECTOR('',#97966,1.); +#97966 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#97967 = ORIENTED_EDGE('',*,*,#97968,.T.); +#97968 = EDGE_CURVE('',#97961,#97969,#97971,.T.); +#97969 = VERTEX_POINT('',#97970); +#97970 = CARTESIAN_POINT('',(-5.28,2.655,0.5)); +#97971 = LINE('',#97972,#97973); +#97972 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#97973 = VECTOR('',#97974,1.); +#97974 = DIRECTION('',(1.,0.,0.)); +#97975 = ORIENTED_EDGE('',*,*,#97976,.T.); +#97976 = EDGE_CURVE('',#97969,#97977,#97979,.T.); +#97977 = VERTEX_POINT('',#97978); +#97978 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#97979 = CIRCLE('',#97980,0.25); +#97980 = AXIS2_PLACEMENT_3D('',#97981,#97982,#97983); +#97981 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#97982 = DIRECTION('',(0.,-1.,0.)); +#97983 = DIRECTION('',(0.,0.,-1.)); +#97984 = ORIENTED_EDGE('',*,*,#97985,.T.); +#97985 = EDGE_CURVE('',#97977,#97875,#97986,.T.); +#97986 = LINE('',#97987,#97988); +#97987 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#97988 = VECTOR('',#97989,1.); +#97989 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#97990 = ORIENTED_EDGE('',*,*,#97874,.T.); +#97991 = ORIENTED_EDGE('',*,*,#97926,.F.); +#97992 = ORIENTED_EDGE('',*,*,#97671,.T.); +#97993 = ORIENTED_EDGE('',*,*,#97994,.T.); +#97994 = EDGE_CURVE('',#97672,#97995,#97997,.T.); +#97995 = VERTEX_POINT('',#97996); +#97996 = CARTESIAN_POINT('',(-4.575230534411,2.655,0.493484892506)); +#97997 = LINE('',#97998,#97999); +#97998 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#97999 = VECTOR('',#98000,1.); +#98000 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#98001 = ORIENTED_EDGE('',*,*,#98002,.T.); +#98002 = EDGE_CURVE('',#97995,#98003,#98005,.T.); +#98003 = VERTEX_POINT('',#98004); +#98004 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98005 = CIRCLE('',#98006,0.75); +#98006 = AXIS2_PLACEMENT_3D('',#98007,#98008,#98009); +#98007 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#98008 = DIRECTION('',(0.,1.,0.)); +#98009 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98010 = ORIENTED_EDGE('',*,*,#98011,.T.); +#98011 = EDGE_CURVE('',#98003,#97959,#98012,.T.); +#98012 = LINE('',#98013,#98014); +#98013 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98014 = VECTOR('',#98015,1.); +#98015 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#98016 = PLANE('',#98017); +#98017 = AXIS2_PLACEMENT_3D('',#98018,#98019,#98020); +#98018 = CARTESIAN_POINT('',(-4.091426690538,2.655,0.874745725546)); +#98019 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98020 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98021 = ADVANCED_FACE('',(#98022),#98033,.T.); +#98022 = FACE_BOUND('',#98023,.T.); +#98023 = EDGE_LOOP('',(#98024,#98025,#98031,#98032)); +#98024 = ORIENTED_EDGE('',*,*,#97842,.T.); +#98025 = ORIENTED_EDGE('',*,*,#98026,.T.); +#98026 = EDGE_CURVE('',#97835,#97747,#98027,.T.); +#98027 = LINE('',#98028,#98029); +#98028 = CARTESIAN_POINT('',(-2.237701336216,1.905,1.43988764291)); +#98029 = VECTOR('',#98030,1.); +#98030 = DIRECTION('',(0.,0.,-1.)); +#98031 = ORIENTED_EDGE('',*,*,#97746,.F.); +#98032 = ORIENTED_EDGE('',*,*,#97943,.F.); +#98033 = PLANE('',#98034); +#98034 = AXIS2_PLACEMENT_3D('',#98035,#98036,#98037); +#98035 = CARTESIAN_POINT('',(-2.237701336216,2.655,1.43988764291)); +#98036 = DIRECTION('',(1.,0.,0.)); +#98037 = DIRECTION('',(0.,0.,-1.)); +#98038 = ADVANCED_FACE('',(#98039),#98064,.T.); +#98039 = FACE_BOUND('',#98040,.T.); +#98040 = EDGE_LOOP('',(#98041,#98049,#98057,#98063)); +#98041 = ORIENTED_EDGE('',*,*,#98042,.T.); +#98042 = EDGE_CURVE('',#97959,#98043,#98045,.T.); +#98043 = VERTEX_POINT('',#98044); +#98044 = CARTESIAN_POINT('',(-5.79,1.905,-2.70609920631E-16)); +#98045 = LINE('',#98046,#98047); +#98046 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#98047 = VECTOR('',#98048,1.); +#98048 = DIRECTION('',(0.,-1.,0.)); +#98049 = ORIENTED_EDGE('',*,*,#98050,.T.); +#98050 = EDGE_CURVE('',#98043,#98051,#98053,.T.); +#98051 = VERTEX_POINT('',#98052); +#98052 = CARTESIAN_POINT('',(-5.79,1.905,0.5)); +#98053 = LINE('',#98054,#98055); +#98054 = CARTESIAN_POINT('',(-5.79,1.905,-2.70609920631E-16)); +#98055 = VECTOR('',#98056,1.); +#98056 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#98057 = ORIENTED_EDGE('',*,*,#98058,.F.); +#98058 = EDGE_CURVE('',#97961,#98051,#98059,.T.); +#98059 = LINE('',#98060,#98061); +#98060 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#98061 = VECTOR('',#98062,1.); +#98062 = DIRECTION('',(0.,-1.,0.)); +#98063 = ORIENTED_EDGE('',*,*,#97958,.F.); +#98064 = PLANE('',#98065); +#98065 = AXIS2_PLACEMENT_3D('',#98066,#98067,#98068); +#98066 = CARTESIAN_POINT('',(-5.79,2.655,-2.70609920631E-16)); +#98067 = DIRECTION('',(-1.,0.,1.7763568394E-15)); +#98068 = DIRECTION('',(1.7763568394E-15,0.,1.)); +#98069 = ADVANCED_FACE('',(#98070),#98088,.T.); +#98070 = FACE_BOUND('',#98071,.T.); +#98071 = EDGE_LOOP('',(#98072,#98080,#98086,#98087)); +#98072 = ORIENTED_EDGE('',*,*,#98073,.T.); +#98073 = EDGE_CURVE('',#98003,#98074,#98076,.T.); +#98074 = VERTEX_POINT('',#98075); +#98075 = CARTESIAN_POINT('',(-5.28,1.905,-2.22044604925E-16)); +#98076 = LINE('',#98077,#98078); +#98077 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98078 = VECTOR('',#98079,1.); +#98079 = DIRECTION('',(0.,-1.,0.)); +#98080 = ORIENTED_EDGE('',*,*,#98081,.T.); +#98081 = EDGE_CURVE('',#98074,#98043,#98082,.T.); +#98082 = LINE('',#98083,#98084); +#98083 = CARTESIAN_POINT('',(-5.28,1.905,-2.22044604925E-16)); +#98084 = VECTOR('',#98085,1.); +#98085 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#98086 = ORIENTED_EDGE('',*,*,#98042,.F.); +#98087 = ORIENTED_EDGE('',*,*,#98011,.F.); +#98088 = PLANE('',#98089); +#98089 = AXIS2_PLACEMENT_3D('',#98090,#98091,#98092); +#98090 = CARTESIAN_POINT('',(-5.28,2.655,-2.22044604925E-16)); +#98091 = DIRECTION('',(9.522610922745E-17,0.,-1.)); +#98092 = DIRECTION('',(-1.,0.,-9.522610922745E-17)); +#98093 = ADVANCED_FACE('',(#98094),#98113,.T.); +#98094 = FACE_BOUND('',#98095,.T.); +#98095 = EDGE_LOOP('',(#98096,#98104,#98111,#98112)); +#98096 = ORIENTED_EDGE('',*,*,#98097,.T.); +#98097 = EDGE_CURVE('',#97995,#98098,#98100,.T.); +#98098 = VERTEX_POINT('',#98099); +#98099 = CARTESIAN_POINT('',(-4.575230534411,1.905,0.493484892506)); +#98100 = LINE('',#98101,#98102); +#98101 = CARTESIAN_POINT('',(-4.575230534411,2.655,0.493484892506)); +#98102 = VECTOR('',#98103,1.); +#98103 = DIRECTION('',(0.,-1.,0.)); +#98104 = ORIENTED_EDGE('',*,*,#98105,.T.); +#98105 = EDGE_CURVE('',#98098,#98074,#98106,.T.); +#98106 = CIRCLE('',#98107,0.75); +#98107 = AXIS2_PLACEMENT_3D('',#98108,#98109,#98110); +#98108 = CARTESIAN_POINT('',(-5.28,1.905,0.75)); +#98109 = DIRECTION('',(0.,1.,0.)); +#98110 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98111 = ORIENTED_EDGE('',*,*,#98073,.F.); +#98112 = ORIENTED_EDGE('',*,*,#98002,.F.); +#98113 = CYLINDRICAL_SURFACE('',#98114,0.75); +#98114 = AXIS2_PLACEMENT_3D('',#98115,#98116,#98117); +#98115 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#98116 = DIRECTION('',(0.,1.,0.)); +#98117 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98118 = ADVANCED_FACE('',(#98119),#98130,.T.); +#98119 = FACE_BOUND('',#98120,.T.); +#98120 = EDGE_LOOP('',(#98121,#98122,#98128,#98129)); +#98121 = ORIENTED_EDGE('',*,*,#97680,.T.); +#98122 = ORIENTED_EDGE('',*,*,#98123,.T.); +#98123 = EDGE_CURVE('',#97681,#98098,#98124,.T.); +#98124 = LINE('',#98125,#98126); +#98125 = CARTESIAN_POINT('',(-4.472624491413,1.905,0.775392678742)); +#98126 = VECTOR('',#98127,1.); +#98127 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#98128 = ORIENTED_EDGE('',*,*,#98097,.F.); +#98129 = ORIENTED_EDGE('',*,*,#97994,.F.); +#98130 = PLANE('',#98131); +#98131 = AXIS2_PLACEMENT_3D('',#98132,#98133,#98134); +#98132 = CARTESIAN_POINT('',(-4.472624491413,2.655,0.775392678742)); +#98133 = DIRECTION('',(0.939692620786,0.,-0.342020143326)); +#98134 = DIRECTION('',(-0.342020143326,0.,-0.939692620786)); +#98135 = ADVANCED_FACE('',(#98136),#98154,.T.); +#98136 = FACE_BOUND('',#98137,.T.); +#98137 = EDGE_LOOP('',(#98138,#98146,#98152,#98153)); +#98138 = ORIENTED_EDGE('',*,*,#98139,.T.); +#98139 = EDGE_CURVE('',#97977,#98140,#98142,.T.); +#98140 = VERTEX_POINT('',#98141); +#98141 = CARTESIAN_POINT('',(-5.045076844804,1.905,0.664494964169)); +#98142 = LINE('',#98143,#98144); +#98143 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#98144 = VECTOR('',#98145,1.); +#98145 = DIRECTION('',(0.,-1.,0.)); +#98146 = ORIENTED_EDGE('',*,*,#98147,.T.); +#98147 = EDGE_CURVE('',#98140,#97884,#98148,.T.); +#98148 = LINE('',#98149,#98150); +#98149 = CARTESIAN_POINT('',(-5.045076844804,1.905,0.664494964169)); +#98150 = VECTOR('',#98151,1.); +#98151 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#98152 = ORIENTED_EDGE('',*,*,#97883,.F.); +#98153 = ORIENTED_EDGE('',*,*,#97985,.F.); +#98154 = PLANE('',#98155); +#98155 = AXIS2_PLACEMENT_3D('',#98156,#98157,#98158); +#98156 = CARTESIAN_POINT('',(-5.045076844804,2.655,0.664494964169)); +#98157 = DIRECTION('',(-0.939692620786,0.,0.342020143326)); +#98158 = DIRECTION('',(0.342020143326,0.,0.939692620786)); +#98159 = ADVANCED_FACE('',(#98160),#98179,.F.); +#98160 = FACE_BOUND('',#98161,.F.); +#98161 = EDGE_LOOP('',(#98162,#98163,#98164,#98173)); +#98162 = ORIENTED_EDGE('',*,*,#97976,.T.); +#98163 = ORIENTED_EDGE('',*,*,#98139,.T.); +#98164 = ORIENTED_EDGE('',*,*,#98165,.F.); +#98165 = EDGE_CURVE('',#98166,#98140,#98168,.T.); +#98166 = VERTEX_POINT('',#98167); +#98167 = CARTESIAN_POINT('',(-5.28,1.905,0.5)); +#98168 = CIRCLE('',#98169,0.25); +#98169 = AXIS2_PLACEMENT_3D('',#98170,#98171,#98172); +#98170 = CARTESIAN_POINT('',(-5.28,1.905,0.75)); +#98171 = DIRECTION('',(0.,-1.,0.)); +#98172 = DIRECTION('',(0.,0.,-1.)); +#98173 = ORIENTED_EDGE('',*,*,#98174,.F.); +#98174 = EDGE_CURVE('',#97969,#98166,#98175,.T.); +#98175 = LINE('',#98176,#98177); +#98176 = CARTESIAN_POINT('',(-5.28,2.655,0.5)); +#98177 = VECTOR('',#98178,1.); +#98178 = DIRECTION('',(0.,-1.,0.)); +#98179 = CYLINDRICAL_SURFACE('',#98180,0.25); +#98180 = AXIS2_PLACEMENT_3D('',#98181,#98182,#98183); +#98181 = CARTESIAN_POINT('',(-5.28,2.655,0.75)); +#98182 = DIRECTION('',(-0.,1.,-0.)); +#98183 = DIRECTION('',(0.,0.,-1.)); +#98184 = ADVANCED_FACE('',(#98185),#98196,.T.); +#98185 = FACE_BOUND('',#98186,.T.); +#98186 = EDGE_LOOP('',(#98187,#98188,#98194,#98195)); +#98187 = ORIENTED_EDGE('',*,*,#98058,.T.); +#98188 = ORIENTED_EDGE('',*,*,#98189,.T.); +#98189 = EDGE_CURVE('',#98051,#98166,#98190,.T.); +#98190 = LINE('',#98191,#98192); +#98191 = CARTESIAN_POINT('',(-5.79,1.905,0.5)); +#98192 = VECTOR('',#98193,1.); +#98193 = DIRECTION('',(1.,0.,0.)); +#98194 = ORIENTED_EDGE('',*,*,#98174,.F.); +#98195 = ORIENTED_EDGE('',*,*,#97968,.F.); +#98196 = PLANE('',#98197); +#98197 = AXIS2_PLACEMENT_3D('',#98198,#98199,#98200); +#98198 = CARTESIAN_POINT('',(-5.79,2.655,0.5)); +#98199 = DIRECTION('',(-0.,0.,1.)); +#98200 = DIRECTION('',(1.,0.,0.)); +#98201 = ADVANCED_FACE('',(#98202),#98219,.F.); +#98202 = FACE_BOUND('',#98203,.F.); +#98203 = EDGE_LOOP('',(#98204,#98205,#98206,#98207,#98208,#98209,#98215, + #98216,#98217,#98218)); +#98204 = ORIENTED_EDGE('',*,*,#98050,.T.); +#98205 = ORIENTED_EDGE('',*,*,#98189,.T.); +#98206 = ORIENTED_EDGE('',*,*,#98165,.T.); +#98207 = ORIENTED_EDGE('',*,*,#98147,.T.); +#98208 = ORIENTED_EDGE('',*,*,#97891,.T.); +#98209 = ORIENTED_EDGE('',*,*,#98210,.F.); +#98210 = EDGE_CURVE('',#97689,#97892,#98211,.T.); +#98211 = LINE('',#98212,#98213); +#98212 = CARTESIAN_POINT('',(-4.24,1.905,0.437372862773)); +#98213 = VECTOR('',#98214,1.); +#98214 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98215 = ORIENTED_EDGE('',*,*,#97688,.T.); +#98216 = ORIENTED_EDGE('',*,*,#98123,.T.); +#98217 = ORIENTED_EDGE('',*,*,#98105,.T.); +#98218 = ORIENTED_EDGE('',*,*,#98081,.T.); +#98219 = PLANE('',#98220); +#98220 = AXIS2_PLACEMENT_3D('',#98221,#98222,#98223); +#98221 = CARTESIAN_POINT('',(-4.091426690538,1.905,0.874745725546)); +#98222 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98223 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98224 = ADVANCED_FACE('',(#98225),#98236,.T.); +#98225 = FACE_BOUND('',#98226,.T.); +#98226 = EDGE_LOOP('',(#98227,#98228,#98229,#98235)); +#98227 = ORIENTED_EDGE('',*,*,#98210,.F.); +#98228 = ORIENTED_EDGE('',*,*,#97697,.F.); +#98229 = ORIENTED_EDGE('',*,*,#98230,.T.); +#98230 = EDGE_CURVE('',#97698,#97901,#98231,.T.); +#98231 = LINE('',#98232,#98233); +#98232 = CARTESIAN_POINT('',(-4.24,1.785,0.437372862773)); +#98233 = VECTOR('',#98234,1.); +#98234 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98235 = ORIENTED_EDGE('',*,*,#97900,.T.); +#98236 = PLANE('',#98237); +#98237 = AXIS2_PLACEMENT_3D('',#98238,#98239,#98240); +#98238 = CARTESIAN_POINT('',(-4.24,-3.25,0.)); +#98239 = DIRECTION('',(-1.,0.,0.)); +#98240 = DIRECTION('',(0.,1.,0.)); +#98241 = ADVANCED_FACE('',(#98242),#98255,.F.); +#98242 = FACE_BOUND('',#98243,.F.); +#98243 = EDGE_LOOP('',(#98244,#98245,#98246,#98247,#98248,#98254)); +#98244 = ORIENTED_EDGE('',*,*,#97705,.T.); +#98245 = ORIENTED_EDGE('',*,*,#98230,.T.); +#98246 = ORIENTED_EDGE('',*,*,#97908,.T.); +#98247 = ORIENTED_EDGE('',*,*,#97818,.T.); +#98248 = ORIENTED_EDGE('',*,*,#98249,.T.); +#98249 = EDGE_CURVE('',#97819,#97763,#98250,.T.); +#98250 = LINE('',#98251,#98252); +#98251 = CARTESIAN_POINT('',(-3.49,1.785,0.437372862773)); +#98252 = VECTOR('',#98253,1.); +#98253 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#98254 = ORIENTED_EDGE('',*,*,#97770,.T.); +#98255 = PLANE('',#98256); +#98256 = AXIS2_PLACEMENT_3D('',#98257,#98258,#98259); +#98257 = CARTESIAN_POINT('',(-4.091426690538,1.785,0.874745725546)); +#98258 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98259 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98260 = ADVANCED_FACE('',(#98261),#98272,.T.); +#98261 = FACE_BOUND('',#98262,.T.); +#98262 = EDGE_LOOP('',(#98263,#98269,#98270,#98271)); +#98263 = ORIENTED_EDGE('',*,*,#98264,.F.); +#98264 = EDGE_CURVE('',#97827,#97755,#98265,.T.); +#98265 = LINE('',#98266,#98267); +#98266 = CARTESIAN_POINT('',(-3.49,1.905,0.437372862773)); +#98267 = VECTOR('',#98268,1.); +#98268 = DIRECTION('',(0.,-5.472315783042E-31,-1.)); +#98269 = ORIENTED_EDGE('',*,*,#97826,.F.); +#98270 = ORIENTED_EDGE('',*,*,#98249,.T.); +#98271 = ORIENTED_EDGE('',*,*,#97762,.F.); +#98272 = PLANE('',#98273); +#98273 = AXIS2_PLACEMENT_3D('',#98274,#98275,#98276); +#98274 = CARTESIAN_POINT('',(-3.49,3.25,0.)); +#98275 = DIRECTION('',(1.,0.,-0.)); +#98276 = DIRECTION('',(0.,-1.,0.)); +#98277 = ADVANCED_FACE('',(#98278),#98284,.F.); +#98278 = FACE_BOUND('',#98279,.F.); +#98279 = EDGE_LOOP('',(#98280,#98281,#98282,#98283)); +#98280 = ORIENTED_EDGE('',*,*,#98264,.F.); +#98281 = ORIENTED_EDGE('',*,*,#97834,.T.); +#98282 = ORIENTED_EDGE('',*,*,#98026,.T.); +#98283 = ORIENTED_EDGE('',*,*,#97754,.T.); +#98284 = PLANE('',#98285); +#98285 = AXIS2_PLACEMENT_3D('',#98286,#98287,#98288); +#98286 = CARTESIAN_POINT('',(-4.091426690538,1.905,0.874745725546)); +#98287 = DIRECTION('',(1.925014880134E-31,1.,-5.472315783042E-31)); +#98288 = DIRECTION('',(0.,5.472315783042E-31,1.)); +#98289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#98293)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#98290,#98291,#98292)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#98290 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#98291 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#98292 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#98293 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#98290, + 'distance_accuracy_value','confusion accuracy'); +#98294 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98295,#98297); +#98295 = ( REPRESENTATION_RELATIONSHIP('','',#96626,#96603) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98296) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98296 = ITEM_DEFINED_TRANSFORMATION('','',#11,#96604); +#98297 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98298); +#98298 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('113','5','',#96598,#96621,$); +#98299 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#96623)); +#98300 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98301,#98303); +#98301 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98302) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98302 = ITEM_DEFINED_TRANSFORMATION('','',#11,#355); +#98303 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98304); +#98304 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('118','R53','',#5,#523,$); +#98305 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98306,#98308); +#98306 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98307) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98307 = ITEM_DEFINED_TRANSFORMATION('','',#11,#359); +#98308 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98309); +#98309 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('119','R51','',#5,#523,$); +#98310 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98311,#98313); +#98311 = ( REPRESENTATION_RELATIONSHIP('','',#88978,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98312) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98312 = ITEM_DEFINED_TRANSFORMATION('','',#11,#363); +#98313 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98314); +#98314 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('120','C10','',#5,#88973,$); +#98315 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98316,#98318); +#98316 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98317) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98317 = ITEM_DEFINED_TRANSFORMATION('','',#11,#367); +#98318 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98319); +#98319 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('121','Rcomp2','',#5,#523,$); +#98320 = SHAPE_DEFINITION_REPRESENTATION(#98321,#98327); +#98321 = PRODUCT_DEFINITION_SHAPE('','',#98322); +#98322 = PRODUCT_DEFINITION('design','',#98323,#98326); +#98323 = PRODUCT_DEFINITION_FORMATION('','',#98324); +#98324 = PRODUCT('SW_PUSH_6mm','SW_PUSH_6mm','',(#98325)); +#98325 = PRODUCT_CONTEXT('',#2,'mechanical'); +#98326 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#98327 = SHAPE_REPRESENTATION('',(#11,#98328),#98332); +#98328 = AXIS2_PLACEMENT_3D('',#98329,#98330,#98331); +#98329 = CARTESIAN_POINT('',(0.,0.,0.)); +#98330 = DIRECTION('',(0.,0.,1.)); +#98331 = DIRECTION('',(1.,0.,-0.)); +#98332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#98336)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#98333,#98334,#98335)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#98333 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#98334 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#98335 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#98336 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#98333, + 'distance_accuracy_value','confusion accuracy'); +#98337 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#98338,#98340); +#98338 = ( REPRESENTATION_RELATIONSHIP('','',#98327,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#98339) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#98339 = ITEM_DEFINED_TRANSFORMATION('','',#11,#371); +#98340 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #98341); +#98341 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('123','SW1','',#5,#98322,$); +#98342 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#98324)); +#98343 = SHAPE_DEFINITION_REPRESENTATION(#98344,#98350); +#98344 = PRODUCT_DEFINITION_SHAPE('','',#98345); +#98345 = PRODUCT_DEFINITION('design','',#98346,#98349); +#98346 = PRODUCT_DEFINITION_FORMATION('','',#98347); +#98347 = PRODUCT('SW_PUSH_6mm','SW_PUSH_6mm','',(#98348)); +#98348 = PRODUCT_CONTEXT('',#2,'mechanical'); +#98349 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#98350 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#98351),#101580); +#98351 = MANIFOLD_SOLID_BREP('',#98352); +#98352 = CLOSED_SHELL('',(#98353,#98370,#98395,#98518,#98549,#98574, + #98599,#98623,#98647,#98672,#98697,#98714,#98739,#98764,#98789, + #98814,#98845,#98870,#98895,#98983,#99071,#99096,#99121,#99138, + #99147,#99173,#99182,#99191,#99235,#99385,#99409,#99552,#99702, + #99852,#99869,#100019,#100043,#100186,#100336,#100486,#100503, + #100512,#100529,#100546,#100563,#100580,#100602,#100619,#100636, + #100653,#100670,#100682,#100699,#100716,#100733,#100750,#100767, + #100784,#100801,#100818,#100830,#100852,#100869,#100886,#100903, + #100920,#100932,#100949,#100966,#100983,#101000,#101017,#101034, + #101051,#101068,#101080,#101102,#101119,#101136,#101153,#101170, + #101182,#101199,#101216,#101233,#101250,#101267,#101284,#101301, + #101318,#101330,#101352,#101369,#101386,#101403,#101420,#101432, + #101449,#101466,#101483,#101500,#101517,#101534,#101551,#101568)); +#98353 = ADVANCED_FACE('',(#98354),#98365,.F.); +#98354 = FACE_BOUND('',#98355,.T.); +#98355 = EDGE_LOOP('',(#98356)); +#98356 = ORIENTED_EDGE('',*,*,#98357,.T.); +#98357 = EDGE_CURVE('',#98358,#98358,#98360,.T.); +#98358 = VERTEX_POINT('',#98359); +#98359 = CARTESIAN_POINT('',(1.65,-4.25,4.1)); +#98360 = CIRCLE('',#98361,0.5); +#98361 = AXIS2_PLACEMENT_3D('',#98362,#98363,#98364); +#98362 = CARTESIAN_POINT('',(1.15,-4.25,4.1)); +#98363 = DIRECTION('',(0.,0.,1.)); +#98364 = DIRECTION('',(1.,0.,-0.)); +#98365 = PLANE('',#98366); +#98366 = AXIS2_PLACEMENT_3D('',#98367,#98368,#98369); +#98367 = CARTESIAN_POINT('',(1.65,-4.25,4.1)); +#98368 = DIRECTION('',(0.,0.,-1.)); +#98369 = DIRECTION('',(-1.,0.,0.)); +#98370 = ADVANCED_FACE('',(#98371),#98390,.T.); +#98371 = FACE_BOUND('',#98372,.T.); +#98372 = EDGE_LOOP('',(#98373,#98381,#98382,#98383)); +#98373 = ORIENTED_EDGE('',*,*,#98374,.T.); +#98374 = EDGE_CURVE('',#98375,#98358,#98377,.T.); +#98375 = VERTEX_POINT('',#98376); +#98376 = CARTESIAN_POINT('',(1.65,-4.25,3.6)); +#98377 = LINE('',#98378,#98379); +#98378 = CARTESIAN_POINT('',(1.65,-4.25,3.5)); +#98379 = VECTOR('',#98380,1.); +#98380 = DIRECTION('',(0.,0.,1.)); +#98381 = ORIENTED_EDGE('',*,*,#98357,.F.); +#98382 = ORIENTED_EDGE('',*,*,#98374,.F.); +#98383 = ORIENTED_EDGE('',*,*,#98384,.F.); +#98384 = EDGE_CURVE('',#98375,#98375,#98385,.T.); +#98385 = CIRCLE('',#98386,0.5); +#98386 = AXIS2_PLACEMENT_3D('',#98387,#98388,#98389); +#98387 = CARTESIAN_POINT('',(1.15,-4.25,3.6)); +#98388 = DIRECTION('',(0.,0.,-1.)); +#98389 = DIRECTION('',(1.,0.,0.)); +#98390 = CYLINDRICAL_SURFACE('',#98391,0.5); +#98391 = AXIS2_PLACEMENT_3D('',#98392,#98393,#98394); +#98392 = CARTESIAN_POINT('',(1.15,-4.25,3.5)); +#98393 = DIRECTION('',(-0.,-0.,-1.)); +#98394 = DIRECTION('',(1.,0.,0.)); +#98395 = ADVANCED_FACE('',(#98396,#98466,#98477,#98488,#98499,#98510), + #98513,.F.); +#98396 = FACE_BOUND('',#98397,.F.); +#98397 = EDGE_LOOP('',(#98398,#98408,#98417,#98425,#98434,#98442,#98451, + #98459)); +#98398 = ORIENTED_EDGE('',*,*,#98399,.F.); +#98399 = EDGE_CURVE('',#98400,#98402,#98404,.T.); +#98400 = VERTEX_POINT('',#98401); +#98401 = CARTESIAN_POINT('',(0.45,-5.25,3.6)); +#98402 = VERTEX_POINT('',#98403); +#98403 = CARTESIAN_POINT('',(5.85,-5.25,3.6)); +#98404 = LINE('',#98405,#98406); +#98405 = CARTESIAN_POINT('',(0.15,-5.25,3.6)); +#98406 = VECTOR('',#98407,1.); +#98407 = DIRECTION('',(1.,0.,0.)); +#98408 = ORIENTED_EDGE('',*,*,#98409,.T.); +#98409 = EDGE_CURVE('',#98400,#98410,#98412,.T.); +#98410 = VERTEX_POINT('',#98411); +#98411 = CARTESIAN_POINT('',(0.15,-4.95,3.6)); +#98412 = CIRCLE('',#98413,0.3); +#98413 = AXIS2_PLACEMENT_3D('',#98414,#98415,#98416); +#98414 = CARTESIAN_POINT('',(0.45,-4.95,3.6)); +#98415 = DIRECTION('',(-0.,-0.,-1.)); +#98416 = DIRECTION('',(0.,-1.,0.)); +#98417 = ORIENTED_EDGE('',*,*,#98418,.F.); +#98418 = EDGE_CURVE('',#98419,#98410,#98421,.T.); +#98419 = VERTEX_POINT('',#98420); +#98420 = CARTESIAN_POINT('',(0.15,0.45,3.6)); +#98421 = LINE('',#98422,#98423); +#98422 = CARTESIAN_POINT('',(0.15,0.75,3.6)); +#98423 = VECTOR('',#98424,1.); +#98424 = DIRECTION('',(0.,-1.,0.)); +#98425 = ORIENTED_EDGE('',*,*,#98426,.F.); +#98426 = EDGE_CURVE('',#98427,#98419,#98429,.T.); +#98427 = VERTEX_POINT('',#98428); +#98428 = CARTESIAN_POINT('',(0.45,0.75,3.6)); +#98429 = CIRCLE('',#98430,0.3); +#98430 = AXIS2_PLACEMENT_3D('',#98431,#98432,#98433); +#98431 = CARTESIAN_POINT('',(0.45,0.45,3.6)); +#98432 = DIRECTION('',(-0.,0.,1.)); +#98433 = DIRECTION('',(0.,-1.,0.)); +#98434 = ORIENTED_EDGE('',*,*,#98435,.F.); +#98435 = EDGE_CURVE('',#98436,#98427,#98438,.T.); +#98436 = VERTEX_POINT('',#98437); +#98437 = CARTESIAN_POINT('',(5.85,0.75,3.6)); +#98438 = LINE('',#98439,#98440); +#98439 = CARTESIAN_POINT('',(6.15,0.75,3.6)); +#98440 = VECTOR('',#98441,1.); +#98441 = DIRECTION('',(-1.,0.,0.)); +#98442 = ORIENTED_EDGE('',*,*,#98443,.F.); +#98443 = EDGE_CURVE('',#98444,#98436,#98446,.T.); +#98444 = VERTEX_POINT('',#98445); +#98445 = CARTESIAN_POINT('',(6.15,0.45,3.6)); +#98446 = CIRCLE('',#98447,0.3); +#98447 = AXIS2_PLACEMENT_3D('',#98448,#98449,#98450); +#98448 = CARTESIAN_POINT('',(5.85,0.45,3.6)); +#98449 = DIRECTION('',(-0.,0.,1.)); +#98450 = DIRECTION('',(0.,-1.,0.)); +#98451 = ORIENTED_EDGE('',*,*,#98452,.F.); +#98452 = EDGE_CURVE('',#98453,#98444,#98455,.T.); +#98453 = VERTEX_POINT('',#98454); +#98454 = CARTESIAN_POINT('',(6.15,-4.95,3.6)); +#98455 = LINE('',#98456,#98457); +#98456 = CARTESIAN_POINT('',(6.15,-5.25,3.6)); +#98457 = VECTOR('',#98458,1.); +#98458 = DIRECTION('',(0.,1.,0.)); +#98459 = ORIENTED_EDGE('',*,*,#98460,.F.); +#98460 = EDGE_CURVE('',#98402,#98453,#98461,.T.); +#98461 = CIRCLE('',#98462,0.3); +#98462 = AXIS2_PLACEMENT_3D('',#98463,#98464,#98465); +#98463 = CARTESIAN_POINT('',(5.85,-4.95,3.6)); +#98464 = DIRECTION('',(-0.,0.,1.)); +#98465 = DIRECTION('',(0.,-1.,0.)); +#98466 = FACE_BOUND('',#98467,.F.); +#98467 = EDGE_LOOP('',(#98468)); +#98468 = ORIENTED_EDGE('',*,*,#98469,.F.); +#98469 = EDGE_CURVE('',#98470,#98470,#98472,.T.); +#98470 = VERTEX_POINT('',#98471); +#98471 = CARTESIAN_POINT('',(5.65,-4.25,3.6)); +#98472 = CIRCLE('',#98473,0.5); +#98473 = AXIS2_PLACEMENT_3D('',#98474,#98475,#98476); +#98474 = CARTESIAN_POINT('',(5.15,-4.25,3.6)); +#98475 = DIRECTION('',(0.,0.,-1.)); +#98476 = DIRECTION('',(1.,0.,0.)); +#98477 = FACE_BOUND('',#98478,.F.); +#98478 = EDGE_LOOP('',(#98479)); +#98479 = ORIENTED_EDGE('',*,*,#98480,.F.); +#98480 = EDGE_CURVE('',#98481,#98481,#98483,.T.); +#98481 = VERTEX_POINT('',#98482); +#98482 = CARTESIAN_POINT('',(4.9,-2.25,3.6)); +#98483 = CIRCLE('',#98484,1.75); +#98484 = AXIS2_PLACEMENT_3D('',#98485,#98486,#98487); +#98485 = CARTESIAN_POINT('',(3.15,-2.25,3.6)); +#98486 = DIRECTION('',(0.,0.,-1.)); +#98487 = DIRECTION('',(1.,0.,0.)); +#98488 = FACE_BOUND('',#98489,.F.); +#98489 = EDGE_LOOP('',(#98490)); +#98490 = ORIENTED_EDGE('',*,*,#98491,.F.); +#98491 = EDGE_CURVE('',#98492,#98492,#98494,.T.); +#98492 = VERTEX_POINT('',#98493); +#98493 = CARTESIAN_POINT('',(1.65,-0.25,3.6)); +#98494 = CIRCLE('',#98495,0.5); +#98495 = AXIS2_PLACEMENT_3D('',#98496,#98497,#98498); +#98496 = CARTESIAN_POINT('',(1.15,-0.25,3.6)); +#98497 = DIRECTION('',(0.,0.,-1.)); +#98498 = DIRECTION('',(1.,0.,0.)); +#98499 = FACE_BOUND('',#98500,.F.); +#98500 = EDGE_LOOP('',(#98501)); +#98501 = ORIENTED_EDGE('',*,*,#98502,.F.); +#98502 = EDGE_CURVE('',#98503,#98503,#98505,.T.); +#98503 = VERTEX_POINT('',#98504); +#98504 = CARTESIAN_POINT('',(5.65,-0.25,3.6)); +#98505 = CIRCLE('',#98506,0.5); +#98506 = AXIS2_PLACEMENT_3D('',#98507,#98508,#98509); +#98507 = CARTESIAN_POINT('',(5.15,-0.25,3.6)); +#98508 = DIRECTION('',(0.,0.,-1.)); +#98509 = DIRECTION('',(1.,0.,0.)); +#98510 = FACE_BOUND('',#98511,.F.); +#98511 = EDGE_LOOP('',(#98512)); +#98512 = ORIENTED_EDGE('',*,*,#98384,.F.); +#98513 = PLANE('',#98514); +#98514 = AXIS2_PLACEMENT_3D('',#98515,#98516,#98517); +#98515 = CARTESIAN_POINT('',(0.15,-5.25,3.6)); +#98516 = DIRECTION('',(0.,0.,-1.)); +#98517 = DIRECTION('',(-1.,0.,0.)); +#98518 = ADVANCED_FACE('',(#98519),#98544,.F.); +#98519 = FACE_BOUND('',#98520,.F.); +#98520 = EDGE_LOOP('',(#98521,#98531,#98537,#98538)); +#98521 = ORIENTED_EDGE('',*,*,#98522,.F.); +#98522 = EDGE_CURVE('',#98523,#98525,#98527,.T.); +#98523 = VERTEX_POINT('',#98524); +#98524 = CARTESIAN_POINT('',(0.45,-5.25,3.5)); +#98525 = VERTEX_POINT('',#98526); +#98526 = CARTESIAN_POINT('',(5.85,-5.25,3.5)); +#98527 = LINE('',#98528,#98529); +#98528 = CARTESIAN_POINT('',(0.15,-5.25,3.5)); +#98529 = VECTOR('',#98530,1.); +#98530 = DIRECTION('',(1.,0.,0.)); +#98531 = ORIENTED_EDGE('',*,*,#98532,.T.); +#98532 = EDGE_CURVE('',#98523,#98400,#98533,.T.); +#98533 = LINE('',#98534,#98535); +#98534 = CARTESIAN_POINT('',(0.45,-5.25,3.5)); +#98535 = VECTOR('',#98536,1.); +#98536 = DIRECTION('',(0.,0.,1.)); +#98537 = ORIENTED_EDGE('',*,*,#98399,.T.); +#98538 = ORIENTED_EDGE('',*,*,#98539,.F.); +#98539 = EDGE_CURVE('',#98525,#98402,#98540,.T.); +#98540 = LINE('',#98541,#98542); +#98541 = CARTESIAN_POINT('',(5.85,-5.25,3.5)); +#98542 = VECTOR('',#98543,1.); +#98543 = DIRECTION('',(0.,0.,1.)); +#98544 = PLANE('',#98545); +#98545 = AXIS2_PLACEMENT_3D('',#98546,#98547,#98548); +#98546 = CARTESIAN_POINT('',(0.15,-5.25,3.5)); +#98547 = DIRECTION('',(0.,1.,0.)); +#98548 = DIRECTION('',(1.,0.,0.)); +#98549 = ADVANCED_FACE('',(#98550),#98569,.T.); +#98550 = FACE_BOUND('',#98551,.T.); +#98551 = EDGE_LOOP('',(#98552,#98553,#98554,#98562)); +#98552 = ORIENTED_EDGE('',*,*,#98532,.T.); +#98553 = ORIENTED_EDGE('',*,*,#98409,.T.); +#98554 = ORIENTED_EDGE('',*,*,#98555,.F.); +#98555 = EDGE_CURVE('',#98556,#98410,#98558,.T.); +#98556 = VERTEX_POINT('',#98557); +#98557 = CARTESIAN_POINT('',(0.15,-4.95,3.5)); +#98558 = LINE('',#98559,#98560); +#98559 = CARTESIAN_POINT('',(0.15,-4.95,3.5)); +#98560 = VECTOR('',#98561,1.); +#98561 = DIRECTION('',(0.,0.,1.)); +#98562 = ORIENTED_EDGE('',*,*,#98563,.F.); +#98563 = EDGE_CURVE('',#98523,#98556,#98564,.T.); +#98564 = CIRCLE('',#98565,0.3); +#98565 = AXIS2_PLACEMENT_3D('',#98566,#98567,#98568); +#98566 = CARTESIAN_POINT('',(0.45,-4.95,3.5)); +#98567 = DIRECTION('',(-0.,-0.,-1.)); +#98568 = DIRECTION('',(0.,-1.,0.)); +#98569 = CYLINDRICAL_SURFACE('',#98570,0.3); +#98570 = AXIS2_PLACEMENT_3D('',#98571,#98572,#98573); +#98571 = CARTESIAN_POINT('',(0.45,-4.95,3.5)); +#98572 = DIRECTION('',(0.,0.,1.)); +#98573 = DIRECTION('',(0.,-1.,0.)); +#98574 = ADVANCED_FACE('',(#98575),#98594,.T.); +#98575 = FACE_BOUND('',#98576,.T.); +#98576 = EDGE_LOOP('',(#98577,#98586,#98592,#98593)); +#98577 = ORIENTED_EDGE('',*,*,#98578,.T.); +#98578 = EDGE_CURVE('',#98525,#98579,#98581,.T.); +#98579 = VERTEX_POINT('',#98580); +#98580 = CARTESIAN_POINT('',(6.15,-4.95,3.5)); +#98581 = CIRCLE('',#98582,0.3); +#98582 = AXIS2_PLACEMENT_3D('',#98583,#98584,#98585); +#98583 = CARTESIAN_POINT('',(5.85,-4.95,3.5)); +#98584 = DIRECTION('',(-0.,0.,1.)); +#98585 = DIRECTION('',(0.,-1.,0.)); +#98586 = ORIENTED_EDGE('',*,*,#98587,.T.); +#98587 = EDGE_CURVE('',#98579,#98453,#98588,.T.); +#98588 = LINE('',#98589,#98590); +#98589 = CARTESIAN_POINT('',(6.15,-4.95,3.5)); +#98590 = VECTOR('',#98591,1.); +#98591 = DIRECTION('',(0.,0.,1.)); +#98592 = ORIENTED_EDGE('',*,*,#98460,.F.); +#98593 = ORIENTED_EDGE('',*,*,#98539,.F.); +#98594 = CYLINDRICAL_SURFACE('',#98595,0.3); +#98595 = AXIS2_PLACEMENT_3D('',#98596,#98597,#98598); +#98596 = CARTESIAN_POINT('',(5.85,-4.95,3.5)); +#98597 = DIRECTION('',(0.,0.,1.)); +#98598 = DIRECTION('',(0.,-1.,0.)); +#98599 = ADVANCED_FACE('',(#98600),#98618,.F.); +#98600 = FACE_BOUND('',#98601,.F.); +#98601 = EDGE_LOOP('',(#98602,#98610,#98616,#98617)); +#98602 = ORIENTED_EDGE('',*,*,#98603,.F.); +#98603 = EDGE_CURVE('',#98604,#98556,#98606,.T.); +#98604 = VERTEX_POINT('',#98605); +#98605 = CARTESIAN_POINT('',(0.15,0.45,3.5)); +#98606 = LINE('',#98607,#98608); +#98607 = CARTESIAN_POINT('',(0.15,0.75,3.5)); +#98608 = VECTOR('',#98609,1.); +#98609 = DIRECTION('',(0.,-1.,0.)); +#98610 = ORIENTED_EDGE('',*,*,#98611,.T.); +#98611 = EDGE_CURVE('',#98604,#98419,#98612,.T.); +#98612 = LINE('',#98613,#98614); +#98613 = CARTESIAN_POINT('',(0.15,0.45,3.5)); +#98614 = VECTOR('',#98615,1.); +#98615 = DIRECTION('',(0.,0.,1.)); +#98616 = ORIENTED_EDGE('',*,*,#98418,.T.); +#98617 = ORIENTED_EDGE('',*,*,#98555,.F.); +#98618 = PLANE('',#98619); +#98619 = AXIS2_PLACEMENT_3D('',#98620,#98621,#98622); +#98620 = CARTESIAN_POINT('',(0.15,0.75,3.5)); +#98621 = DIRECTION('',(1.,0.,0.)); +#98622 = DIRECTION('',(0.,-1.,0.)); +#98623 = ADVANCED_FACE('',(#98624),#98642,.F.); +#98624 = FACE_BOUND('',#98625,.F.); +#98625 = EDGE_LOOP('',(#98626,#98634,#98635,#98636)); +#98626 = ORIENTED_EDGE('',*,*,#98627,.F.); +#98627 = EDGE_CURVE('',#98579,#98628,#98630,.T.); +#98628 = VERTEX_POINT('',#98629); +#98629 = CARTESIAN_POINT('',(6.15,0.45,3.5)); +#98630 = LINE('',#98631,#98632); +#98631 = CARTESIAN_POINT('',(6.15,-5.25,3.5)); +#98632 = VECTOR('',#98633,1.); +#98633 = DIRECTION('',(0.,1.,0.)); +#98634 = ORIENTED_EDGE('',*,*,#98587,.T.); +#98635 = ORIENTED_EDGE('',*,*,#98452,.T.); +#98636 = ORIENTED_EDGE('',*,*,#98637,.F.); +#98637 = EDGE_CURVE('',#98628,#98444,#98638,.T.); +#98638 = LINE('',#98639,#98640); +#98639 = CARTESIAN_POINT('',(6.15,0.45,3.5)); +#98640 = VECTOR('',#98641,1.); +#98641 = DIRECTION('',(0.,0.,1.)); +#98642 = PLANE('',#98643); +#98643 = AXIS2_PLACEMENT_3D('',#98644,#98645,#98646); +#98644 = CARTESIAN_POINT('',(6.15,-5.25,3.5)); +#98645 = DIRECTION('',(-1.,0.,0.)); +#98646 = DIRECTION('',(0.,1.,0.)); +#98647 = ADVANCED_FACE('',(#98648),#98667,.T.); +#98648 = FACE_BOUND('',#98649,.T.); +#98649 = EDGE_LOOP('',(#98650,#98659,#98660,#98661)); +#98650 = ORIENTED_EDGE('',*,*,#98651,.T.); +#98651 = EDGE_CURVE('',#98652,#98604,#98654,.T.); +#98652 = VERTEX_POINT('',#98653); +#98653 = CARTESIAN_POINT('',(0.45,0.75,3.5)); +#98654 = CIRCLE('',#98655,0.3); +#98655 = AXIS2_PLACEMENT_3D('',#98656,#98657,#98658); +#98656 = CARTESIAN_POINT('',(0.45,0.45,3.5)); +#98657 = DIRECTION('',(-0.,0.,1.)); +#98658 = DIRECTION('',(0.,-1.,0.)); +#98659 = ORIENTED_EDGE('',*,*,#98611,.T.); +#98660 = ORIENTED_EDGE('',*,*,#98426,.F.); +#98661 = ORIENTED_EDGE('',*,*,#98662,.F.); +#98662 = EDGE_CURVE('',#98652,#98427,#98663,.T.); +#98663 = LINE('',#98664,#98665); +#98664 = CARTESIAN_POINT('',(0.45,0.75,3.5)); +#98665 = VECTOR('',#98666,1.); +#98666 = DIRECTION('',(0.,0.,1.)); +#98667 = CYLINDRICAL_SURFACE('',#98668,0.3); +#98668 = AXIS2_PLACEMENT_3D('',#98669,#98670,#98671); +#98669 = CARTESIAN_POINT('',(0.45,0.45,3.5)); +#98670 = DIRECTION('',(0.,0.,1.)); +#98671 = DIRECTION('',(0.,1.,0.)); +#98672 = ADVANCED_FACE('',(#98673),#98692,.T.); +#98673 = FACE_BOUND('',#98674,.T.); +#98674 = EDGE_LOOP('',(#98675,#98684,#98690,#98691)); +#98675 = ORIENTED_EDGE('',*,*,#98676,.T.); +#98676 = EDGE_CURVE('',#98628,#98677,#98679,.T.); +#98677 = VERTEX_POINT('',#98678); +#98678 = CARTESIAN_POINT('',(5.85,0.75,3.5)); +#98679 = CIRCLE('',#98680,0.3); +#98680 = AXIS2_PLACEMENT_3D('',#98681,#98682,#98683); +#98681 = CARTESIAN_POINT('',(5.85,0.45,3.5)); +#98682 = DIRECTION('',(-0.,0.,1.)); +#98683 = DIRECTION('',(0.,-1.,0.)); +#98684 = ORIENTED_EDGE('',*,*,#98685,.T.); +#98685 = EDGE_CURVE('',#98677,#98436,#98686,.T.); +#98686 = LINE('',#98687,#98688); +#98687 = CARTESIAN_POINT('',(5.85,0.75,3.5)); +#98688 = VECTOR('',#98689,1.); +#98689 = DIRECTION('',(0.,0.,1.)); +#98690 = ORIENTED_EDGE('',*,*,#98443,.F.); +#98691 = ORIENTED_EDGE('',*,*,#98637,.F.); +#98692 = CYLINDRICAL_SURFACE('',#98693,0.3); +#98693 = AXIS2_PLACEMENT_3D('',#98694,#98695,#98696); +#98694 = CARTESIAN_POINT('',(5.85,0.45,3.5)); +#98695 = DIRECTION('',(0.,0.,1.)); +#98696 = DIRECTION('',(1.,0.,-0.)); +#98697 = ADVANCED_FACE('',(#98698),#98709,.F.); +#98698 = FACE_BOUND('',#98699,.F.); +#98699 = EDGE_LOOP('',(#98700,#98706,#98707,#98708)); +#98700 = ORIENTED_EDGE('',*,*,#98701,.F.); +#98701 = EDGE_CURVE('',#98677,#98652,#98702,.T.); +#98702 = LINE('',#98703,#98704); +#98703 = CARTESIAN_POINT('',(6.15,0.75,3.5)); +#98704 = VECTOR('',#98705,1.); +#98705 = DIRECTION('',(-1.,0.,0.)); +#98706 = ORIENTED_EDGE('',*,*,#98685,.T.); +#98707 = ORIENTED_EDGE('',*,*,#98435,.T.); +#98708 = ORIENTED_EDGE('',*,*,#98662,.F.); +#98709 = PLANE('',#98710); +#98710 = AXIS2_PLACEMENT_3D('',#98711,#98712,#98713); +#98711 = CARTESIAN_POINT('',(6.15,0.75,3.5)); +#98712 = DIRECTION('',(0.,-1.,0.)); +#98713 = DIRECTION('',(-1.,0.,0.)); +#98714 = ADVANCED_FACE('',(#98715),#98734,.T.); +#98715 = FACE_BOUND('',#98716,.T.); +#98716 = EDGE_LOOP('',(#98717,#98725,#98732,#98733)); +#98717 = ORIENTED_EDGE('',*,*,#98718,.T.); +#98718 = EDGE_CURVE('',#98470,#98719,#98721,.T.); +#98719 = VERTEX_POINT('',#98720); +#98720 = CARTESIAN_POINT('',(5.65,-4.25,4.1)); +#98721 = LINE('',#98722,#98723); +#98722 = CARTESIAN_POINT('',(5.65,-4.25,3.5)); +#98723 = VECTOR('',#98724,1.); +#98724 = DIRECTION('',(0.,0.,1.)); +#98725 = ORIENTED_EDGE('',*,*,#98726,.F.); +#98726 = EDGE_CURVE('',#98719,#98719,#98727,.T.); +#98727 = CIRCLE('',#98728,0.5); +#98728 = AXIS2_PLACEMENT_3D('',#98729,#98730,#98731); +#98729 = CARTESIAN_POINT('',(5.15,-4.25,4.1)); +#98730 = DIRECTION('',(0.,0.,1.)); +#98731 = DIRECTION('',(1.,0.,-0.)); +#98732 = ORIENTED_EDGE('',*,*,#98718,.F.); +#98733 = ORIENTED_EDGE('',*,*,#98469,.F.); +#98734 = CYLINDRICAL_SURFACE('',#98735,0.5); +#98735 = AXIS2_PLACEMENT_3D('',#98736,#98737,#98738); +#98736 = CARTESIAN_POINT('',(5.15,-4.25,3.5)); +#98737 = DIRECTION('',(-0.,-0.,-1.)); +#98738 = DIRECTION('',(1.,0.,0.)); +#98739 = ADVANCED_FACE('',(#98740),#98759,.T.); +#98740 = FACE_BOUND('',#98741,.T.); +#98741 = EDGE_LOOP('',(#98742,#98750,#98757,#98758)); +#98742 = ORIENTED_EDGE('',*,*,#98743,.T.); +#98743 = EDGE_CURVE('',#98481,#98744,#98746,.T.); +#98744 = VERTEX_POINT('',#98745); +#98745 = CARTESIAN_POINT('',(4.9,-2.25,4.2)); +#98746 = LINE('',#98747,#98748); +#98747 = CARTESIAN_POINT('',(4.9,-2.25,3.5)); +#98748 = VECTOR('',#98749,1.); +#98749 = DIRECTION('',(0.,0.,1.)); +#98750 = ORIENTED_EDGE('',*,*,#98751,.F.); +#98751 = EDGE_CURVE('',#98744,#98744,#98752,.T.); +#98752 = CIRCLE('',#98753,1.75); +#98753 = AXIS2_PLACEMENT_3D('',#98754,#98755,#98756); +#98754 = CARTESIAN_POINT('',(3.15,-2.25,4.2)); +#98755 = DIRECTION('',(0.,0.,1.)); +#98756 = DIRECTION('',(1.,0.,-0.)); +#98757 = ORIENTED_EDGE('',*,*,#98743,.F.); +#98758 = ORIENTED_EDGE('',*,*,#98480,.F.); +#98759 = CYLINDRICAL_SURFACE('',#98760,1.75); +#98760 = AXIS2_PLACEMENT_3D('',#98761,#98762,#98763); +#98761 = CARTESIAN_POINT('',(3.15,-2.25,3.5)); +#98762 = DIRECTION('',(-0.,-0.,-1.)); +#98763 = DIRECTION('',(1.,0.,0.)); +#98764 = ADVANCED_FACE('',(#98765),#98784,.T.); +#98765 = FACE_BOUND('',#98766,.T.); +#98766 = EDGE_LOOP('',(#98767,#98775,#98782,#98783)); +#98767 = ORIENTED_EDGE('',*,*,#98768,.T.); +#98768 = EDGE_CURVE('',#98492,#98769,#98771,.T.); +#98769 = VERTEX_POINT('',#98770); +#98770 = CARTESIAN_POINT('',(1.65,-0.25,4.1)); +#98771 = LINE('',#98772,#98773); +#98772 = CARTESIAN_POINT('',(1.65,-0.25,3.5)); +#98773 = VECTOR('',#98774,1.); +#98774 = DIRECTION('',(0.,0.,1.)); +#98775 = ORIENTED_EDGE('',*,*,#98776,.F.); +#98776 = EDGE_CURVE('',#98769,#98769,#98777,.T.); +#98777 = CIRCLE('',#98778,0.5); +#98778 = AXIS2_PLACEMENT_3D('',#98779,#98780,#98781); +#98779 = CARTESIAN_POINT('',(1.15,-0.25,4.1)); +#98780 = DIRECTION('',(0.,0.,1.)); +#98781 = DIRECTION('',(1.,0.,-0.)); +#98782 = ORIENTED_EDGE('',*,*,#98768,.F.); +#98783 = ORIENTED_EDGE('',*,*,#98491,.F.); +#98784 = CYLINDRICAL_SURFACE('',#98785,0.5); +#98785 = AXIS2_PLACEMENT_3D('',#98786,#98787,#98788); +#98786 = CARTESIAN_POINT('',(1.15,-0.25,3.5)); +#98787 = DIRECTION('',(-0.,-0.,-1.)); +#98788 = DIRECTION('',(1.,0.,0.)); +#98789 = ADVANCED_FACE('',(#98790),#98809,.T.); +#98790 = FACE_BOUND('',#98791,.T.); +#98791 = EDGE_LOOP('',(#98792,#98800,#98807,#98808)); +#98792 = ORIENTED_EDGE('',*,*,#98793,.T.); +#98793 = EDGE_CURVE('',#98503,#98794,#98796,.T.); +#98794 = VERTEX_POINT('',#98795); +#98795 = CARTESIAN_POINT('',(5.65,-0.25,4.1)); +#98796 = LINE('',#98797,#98798); +#98797 = CARTESIAN_POINT('',(5.65,-0.25,3.5)); +#98798 = VECTOR('',#98799,1.); +#98799 = DIRECTION('',(0.,0.,1.)); +#98800 = ORIENTED_EDGE('',*,*,#98801,.F.); +#98801 = EDGE_CURVE('',#98794,#98794,#98802,.T.); +#98802 = CIRCLE('',#98803,0.5); +#98803 = AXIS2_PLACEMENT_3D('',#98804,#98805,#98806); +#98804 = CARTESIAN_POINT('',(5.15,-0.25,4.1)); +#98805 = DIRECTION('',(0.,0.,1.)); +#98806 = DIRECTION('',(1.,0.,-0.)); +#98807 = ORIENTED_EDGE('',*,*,#98793,.F.); +#98808 = ORIENTED_EDGE('',*,*,#98502,.F.); +#98809 = CYLINDRICAL_SURFACE('',#98810,0.5); +#98810 = AXIS2_PLACEMENT_3D('',#98811,#98812,#98813); +#98811 = CARTESIAN_POINT('',(5.15,-0.25,3.5)); +#98812 = DIRECTION('',(-0.,-0.,-1.)); +#98813 = DIRECTION('',(1.,0.,0.)); +#98814 = ADVANCED_FACE('',(#98815),#98840,.F.); +#98815 = FACE_BOUND('',#98816,.F.); +#98816 = EDGE_LOOP('',(#98817,#98827,#98833,#98834)); +#98817 = ORIENTED_EDGE('',*,*,#98818,.F.); +#98818 = EDGE_CURVE('',#98819,#98821,#98823,.T.); +#98819 = VERTEX_POINT('',#98820); +#98820 = CARTESIAN_POINT('',(0.45,-5.25,0.)); +#98821 = VERTEX_POINT('',#98822); +#98822 = CARTESIAN_POINT('',(5.85,-5.25,0.)); +#98823 = LINE('',#98824,#98825); +#98824 = CARTESIAN_POINT('',(0.15,-5.25,0.)); +#98825 = VECTOR('',#98826,1.); +#98826 = DIRECTION('',(1.,0.,0.)); +#98827 = ORIENTED_EDGE('',*,*,#98828,.T.); +#98828 = EDGE_CURVE('',#98819,#98523,#98829,.T.); +#98829 = LINE('',#98830,#98831); +#98830 = CARTESIAN_POINT('',(0.45,-5.25,0.)); +#98831 = VECTOR('',#98832,1.); +#98832 = DIRECTION('',(0.,0.,1.)); +#98833 = ORIENTED_EDGE('',*,*,#98522,.T.); +#98834 = ORIENTED_EDGE('',*,*,#98835,.F.); +#98835 = EDGE_CURVE('',#98821,#98525,#98836,.T.); +#98836 = LINE('',#98837,#98838); +#98837 = CARTESIAN_POINT('',(5.85,-5.25,0.)); +#98838 = VECTOR('',#98839,1.); +#98839 = DIRECTION('',(0.,0.,1.)); +#98840 = PLANE('',#98841); +#98841 = AXIS2_PLACEMENT_3D('',#98842,#98843,#98844); +#98842 = CARTESIAN_POINT('',(0.15,-5.25,0.)); +#98843 = DIRECTION('',(0.,1.,0.)); +#98844 = DIRECTION('',(1.,0.,0.)); +#98845 = ADVANCED_FACE('',(#98846),#98865,.T.); +#98846 = FACE_BOUND('',#98847,.T.); +#98847 = EDGE_LOOP('',(#98848,#98849,#98850,#98858)); +#98848 = ORIENTED_EDGE('',*,*,#98828,.T.); +#98849 = ORIENTED_EDGE('',*,*,#98563,.T.); +#98850 = ORIENTED_EDGE('',*,*,#98851,.F.); +#98851 = EDGE_CURVE('',#98852,#98556,#98854,.T.); +#98852 = VERTEX_POINT('',#98853); +#98853 = CARTESIAN_POINT('',(0.15,-4.95,0.)); +#98854 = LINE('',#98855,#98856); +#98855 = CARTESIAN_POINT('',(0.15,-4.95,0.)); +#98856 = VECTOR('',#98857,1.); +#98857 = DIRECTION('',(0.,0.,1.)); +#98858 = ORIENTED_EDGE('',*,*,#98859,.F.); +#98859 = EDGE_CURVE('',#98819,#98852,#98860,.T.); +#98860 = CIRCLE('',#98861,0.3); +#98861 = AXIS2_PLACEMENT_3D('',#98862,#98863,#98864); +#98862 = CARTESIAN_POINT('',(0.45,-4.95,0.)); +#98863 = DIRECTION('',(-0.,-0.,-1.)); +#98864 = DIRECTION('',(0.,-1.,0.)); +#98865 = CYLINDRICAL_SURFACE('',#98866,0.3); +#98866 = AXIS2_PLACEMENT_3D('',#98867,#98868,#98869); +#98867 = CARTESIAN_POINT('',(0.45,-4.95,0.)); +#98868 = DIRECTION('',(0.,0.,1.)); +#98869 = DIRECTION('',(0.,-1.,0.)); +#98870 = ADVANCED_FACE('',(#98871),#98890,.T.); +#98871 = FACE_BOUND('',#98872,.T.); +#98872 = EDGE_LOOP('',(#98873,#98882,#98888,#98889)); +#98873 = ORIENTED_EDGE('',*,*,#98874,.T.); +#98874 = EDGE_CURVE('',#98821,#98875,#98877,.T.); +#98875 = VERTEX_POINT('',#98876); +#98876 = CARTESIAN_POINT('',(6.15,-4.95,0.)); +#98877 = CIRCLE('',#98878,0.3); +#98878 = AXIS2_PLACEMENT_3D('',#98879,#98880,#98881); +#98879 = CARTESIAN_POINT('',(5.85,-4.95,0.)); +#98880 = DIRECTION('',(-0.,0.,1.)); +#98881 = DIRECTION('',(0.,-1.,0.)); +#98882 = ORIENTED_EDGE('',*,*,#98883,.T.); +#98883 = EDGE_CURVE('',#98875,#98579,#98884,.T.); +#98884 = LINE('',#98885,#98886); +#98885 = CARTESIAN_POINT('',(6.15,-4.95,0.)); +#98886 = VECTOR('',#98887,1.); +#98887 = DIRECTION('',(0.,0.,1.)); +#98888 = ORIENTED_EDGE('',*,*,#98578,.F.); +#98889 = ORIENTED_EDGE('',*,*,#98835,.F.); +#98890 = CYLINDRICAL_SURFACE('',#98891,0.3); +#98891 = AXIS2_PLACEMENT_3D('',#98892,#98893,#98894); +#98892 = CARTESIAN_POINT('',(5.85,-4.95,0.)); +#98893 = DIRECTION('',(0.,0.,1.)); +#98894 = DIRECTION('',(0.,-1.,0.)); +#98895 = ADVANCED_FACE('',(#98896),#98978,.F.); +#98896 = FACE_BOUND('',#98897,.F.); +#98897 = EDGE_LOOP('',(#98898,#98908,#98914,#98915,#98916,#98924,#98932, + #98940,#98948,#98956,#98964,#98972)); +#98898 = ORIENTED_EDGE('',*,*,#98899,.F.); +#98899 = EDGE_CURVE('',#98900,#98902,#98904,.T.); +#98900 = VERTEX_POINT('',#98901); +#98901 = CARTESIAN_POINT('',(0.15,0.45,0.)); +#98902 = VERTEX_POINT('',#98903); +#98903 = CARTESIAN_POINT('',(0.15,0.35,0.)); +#98904 = LINE('',#98905,#98906); +#98905 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98906 = VECTOR('',#98907,1.); +#98907 = DIRECTION('',(0.,-1.,0.)); +#98908 = ORIENTED_EDGE('',*,*,#98909,.T.); +#98909 = EDGE_CURVE('',#98900,#98604,#98910,.T.); +#98910 = LINE('',#98911,#98912); +#98911 = CARTESIAN_POINT('',(0.15,0.45,0.)); +#98912 = VECTOR('',#98913,1.); +#98913 = DIRECTION('',(0.,0.,1.)); +#98914 = ORIENTED_EDGE('',*,*,#98603,.T.); +#98915 = ORIENTED_EDGE('',*,*,#98851,.F.); +#98916 = ORIENTED_EDGE('',*,*,#98917,.F.); +#98917 = EDGE_CURVE('',#98918,#98852,#98920,.T.); +#98918 = VERTEX_POINT('',#98919); +#98919 = CARTESIAN_POINT('',(0.15,-4.85,0.)); +#98920 = LINE('',#98921,#98922); +#98921 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98922 = VECTOR('',#98923,1.); +#98923 = DIRECTION('',(0.,-1.,0.)); +#98924 = ORIENTED_EDGE('',*,*,#98925,.F.); +#98925 = EDGE_CURVE('',#98926,#98918,#98928,.T.); +#98926 = VERTEX_POINT('',#98927); +#98927 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#98928 = LINE('',#98929,#98930); +#98929 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#98930 = VECTOR('',#98931,1.); +#98931 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98932 = ORIENTED_EDGE('',*,*,#98933,.T.); +#98933 = EDGE_CURVE('',#98926,#98934,#98936,.T.); +#98934 = VERTEX_POINT('',#98935); +#98935 = CARTESIAN_POINT('',(0.15,-4.15,1.5)); +#98936 = LINE('',#98937,#98938); +#98937 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#98938 = VECTOR('',#98939,1.); +#98939 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#98940 = ORIENTED_EDGE('',*,*,#98941,.T.); +#98941 = EDGE_CURVE('',#98934,#98942,#98944,.T.); +#98942 = VERTEX_POINT('',#98943); +#98943 = CARTESIAN_POINT('',(0.15,-4.15,0.)); +#98944 = LINE('',#98945,#98946); +#98945 = CARTESIAN_POINT('',(0.15,-4.15,1.5)); +#98946 = VECTOR('',#98947,1.); +#98947 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98948 = ORIENTED_EDGE('',*,*,#98949,.F.); +#98949 = EDGE_CURVE('',#98950,#98942,#98952,.T.); +#98950 = VERTEX_POINT('',#98951); +#98951 = CARTESIAN_POINT('',(0.15,-0.35,0.)); +#98952 = LINE('',#98953,#98954); +#98953 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98954 = VECTOR('',#98955,1.); +#98955 = DIRECTION('',(0.,-1.,0.)); +#98956 = ORIENTED_EDGE('',*,*,#98957,.F.); +#98957 = EDGE_CURVE('',#98958,#98950,#98960,.T.); +#98958 = VERTEX_POINT('',#98959); +#98959 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#98960 = LINE('',#98961,#98962); +#98961 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#98962 = VECTOR('',#98963,1.); +#98963 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98964 = ORIENTED_EDGE('',*,*,#98965,.T.); +#98965 = EDGE_CURVE('',#98958,#98966,#98968,.T.); +#98966 = VERTEX_POINT('',#98967); +#98967 = CARTESIAN_POINT('',(0.15,0.35,1.5)); +#98968 = LINE('',#98969,#98970); +#98969 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#98970 = VECTOR('',#98971,1.); +#98971 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#98972 = ORIENTED_EDGE('',*,*,#98973,.T.); +#98973 = EDGE_CURVE('',#98966,#98902,#98974,.T.); +#98974 = LINE('',#98975,#98976); +#98975 = CARTESIAN_POINT('',(0.15,0.35,1.5)); +#98976 = VECTOR('',#98977,1.); +#98977 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#98978 = PLANE('',#98979); +#98979 = AXIS2_PLACEMENT_3D('',#98980,#98981,#98982); +#98980 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#98981 = DIRECTION('',(1.,0.,0.)); +#98982 = DIRECTION('',(0.,-1.,0.)); +#98983 = ADVANCED_FACE('',(#98984),#99066,.F.); +#98984 = FACE_BOUND('',#98985,.F.); +#98985 = EDGE_LOOP('',(#98986,#98994,#98995,#98996,#99004,#99012,#99020, + #99028,#99036,#99044,#99052,#99060)); +#98986 = ORIENTED_EDGE('',*,*,#98987,.F.); +#98987 = EDGE_CURVE('',#98875,#98988,#98990,.T.); +#98988 = VERTEX_POINT('',#98989); +#98989 = CARTESIAN_POINT('',(6.15,-4.85,0.)); +#98990 = LINE('',#98991,#98992); +#98991 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#98992 = VECTOR('',#98993,1.); +#98993 = DIRECTION('',(0.,1.,0.)); +#98994 = ORIENTED_EDGE('',*,*,#98883,.T.); +#98995 = ORIENTED_EDGE('',*,*,#98627,.T.); +#98996 = ORIENTED_EDGE('',*,*,#98997,.F.); +#98997 = EDGE_CURVE('',#98998,#98628,#99000,.T.); +#98998 = VERTEX_POINT('',#98999); +#98999 = CARTESIAN_POINT('',(6.15,0.45,0.)); +#99000 = LINE('',#99001,#99002); +#99001 = CARTESIAN_POINT('',(6.15,0.45,0.)); +#99002 = VECTOR('',#99003,1.); +#99003 = DIRECTION('',(0.,0.,1.)); +#99004 = ORIENTED_EDGE('',*,*,#99005,.F.); +#99005 = EDGE_CURVE('',#99006,#98998,#99008,.T.); +#99006 = VERTEX_POINT('',#99007); +#99007 = CARTESIAN_POINT('',(6.15,0.35,0.)); +#99008 = LINE('',#99009,#99010); +#99009 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99010 = VECTOR('',#99011,1.); +#99011 = DIRECTION('',(0.,1.,0.)); +#99012 = ORIENTED_EDGE('',*,*,#99013,.F.); +#99013 = EDGE_CURVE('',#99014,#99006,#99016,.T.); +#99014 = VERTEX_POINT('',#99015); +#99015 = CARTESIAN_POINT('',(6.15,0.35,1.5)); +#99016 = LINE('',#99017,#99018); +#99017 = CARTESIAN_POINT('',(6.15,0.35,1.5)); +#99018 = VECTOR('',#99019,1.); +#99019 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99020 = ORIENTED_EDGE('',*,*,#99021,.F.); +#99021 = EDGE_CURVE('',#99022,#99014,#99024,.T.); +#99022 = VERTEX_POINT('',#99023); +#99023 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#99024 = LINE('',#99025,#99026); +#99025 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#99026 = VECTOR('',#99027,1.); +#99027 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99028 = ORIENTED_EDGE('',*,*,#99029,.T.); +#99029 = EDGE_CURVE('',#99022,#99030,#99032,.T.); +#99030 = VERTEX_POINT('',#99031); +#99031 = CARTESIAN_POINT('',(6.15,-0.35,0.)); +#99032 = LINE('',#99033,#99034); +#99033 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#99034 = VECTOR('',#99035,1.); +#99035 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99036 = ORIENTED_EDGE('',*,*,#99037,.F.); +#99037 = EDGE_CURVE('',#99038,#99030,#99040,.T.); +#99038 = VERTEX_POINT('',#99039); +#99039 = CARTESIAN_POINT('',(6.15,-4.15,0.)); +#99040 = LINE('',#99041,#99042); +#99041 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99042 = VECTOR('',#99043,1.); +#99043 = DIRECTION('',(0.,1.,0.)); +#99044 = ORIENTED_EDGE('',*,*,#99045,.F.); +#99045 = EDGE_CURVE('',#99046,#99038,#99048,.T.); +#99046 = VERTEX_POINT('',#99047); +#99047 = CARTESIAN_POINT('',(6.15,-4.15,1.5)); +#99048 = LINE('',#99049,#99050); +#99049 = CARTESIAN_POINT('',(6.15,-4.15,1.5)); +#99050 = VECTOR('',#99051,1.); +#99051 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99052 = ORIENTED_EDGE('',*,*,#99053,.F.); +#99053 = EDGE_CURVE('',#99054,#99046,#99056,.T.); +#99054 = VERTEX_POINT('',#99055); +#99055 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99056 = LINE('',#99057,#99058); +#99057 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99058 = VECTOR('',#99059,1.); +#99059 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99060 = ORIENTED_EDGE('',*,*,#99061,.T.); +#99061 = EDGE_CURVE('',#99054,#98988,#99062,.T.); +#99062 = LINE('',#99063,#99064); +#99063 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99064 = VECTOR('',#99065,1.); +#99065 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99066 = PLANE('',#99067); +#99067 = AXIS2_PLACEMENT_3D('',#99068,#99069,#99070); +#99068 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99069 = DIRECTION('',(-1.,0.,0.)); +#99070 = DIRECTION('',(0.,1.,0.)); +#99071 = ADVANCED_FACE('',(#99072),#99091,.T.); +#99072 = FACE_BOUND('',#99073,.T.); +#99073 = EDGE_LOOP('',(#99074,#99083,#99084,#99085)); +#99074 = ORIENTED_EDGE('',*,*,#99075,.T.); +#99075 = EDGE_CURVE('',#99076,#98900,#99078,.T.); +#99076 = VERTEX_POINT('',#99077); +#99077 = CARTESIAN_POINT('',(0.45,0.75,0.)); +#99078 = CIRCLE('',#99079,0.3); +#99079 = AXIS2_PLACEMENT_3D('',#99080,#99081,#99082); +#99080 = CARTESIAN_POINT('',(0.45,0.45,0.)); +#99081 = DIRECTION('',(-0.,0.,1.)); +#99082 = DIRECTION('',(0.,-1.,0.)); +#99083 = ORIENTED_EDGE('',*,*,#98909,.T.); +#99084 = ORIENTED_EDGE('',*,*,#98651,.F.); +#99085 = ORIENTED_EDGE('',*,*,#99086,.F.); +#99086 = EDGE_CURVE('',#99076,#98652,#99087,.T.); +#99087 = LINE('',#99088,#99089); +#99088 = CARTESIAN_POINT('',(0.45,0.75,0.)); +#99089 = VECTOR('',#99090,1.); +#99090 = DIRECTION('',(0.,0.,1.)); +#99091 = CYLINDRICAL_SURFACE('',#99092,0.3); +#99092 = AXIS2_PLACEMENT_3D('',#99093,#99094,#99095); +#99093 = CARTESIAN_POINT('',(0.45,0.45,0.)); +#99094 = DIRECTION('',(0.,0.,1.)); +#99095 = DIRECTION('',(0.,1.,0.)); +#99096 = ADVANCED_FACE('',(#99097),#99116,.T.); +#99097 = FACE_BOUND('',#99098,.T.); +#99098 = EDGE_LOOP('',(#99099,#99108,#99114,#99115)); +#99099 = ORIENTED_EDGE('',*,*,#99100,.T.); +#99100 = EDGE_CURVE('',#98998,#99101,#99103,.T.); +#99101 = VERTEX_POINT('',#99102); +#99102 = CARTESIAN_POINT('',(5.85,0.75,0.)); +#99103 = CIRCLE('',#99104,0.3); +#99104 = AXIS2_PLACEMENT_3D('',#99105,#99106,#99107); +#99105 = CARTESIAN_POINT('',(5.85,0.45,0.)); +#99106 = DIRECTION('',(-0.,0.,1.)); +#99107 = DIRECTION('',(0.,-1.,0.)); +#99108 = ORIENTED_EDGE('',*,*,#99109,.T.); +#99109 = EDGE_CURVE('',#99101,#98677,#99110,.T.); +#99110 = LINE('',#99111,#99112); +#99111 = CARTESIAN_POINT('',(5.85,0.75,0.)); +#99112 = VECTOR('',#99113,1.); +#99113 = DIRECTION('',(0.,0.,1.)); +#99114 = ORIENTED_EDGE('',*,*,#98676,.F.); +#99115 = ORIENTED_EDGE('',*,*,#98997,.F.); +#99116 = CYLINDRICAL_SURFACE('',#99117,0.3); +#99117 = AXIS2_PLACEMENT_3D('',#99118,#99119,#99120); +#99118 = CARTESIAN_POINT('',(5.85,0.45,0.)); +#99119 = DIRECTION('',(0.,0.,1.)); +#99120 = DIRECTION('',(1.,0.,-0.)); +#99121 = ADVANCED_FACE('',(#99122),#99133,.F.); +#99122 = FACE_BOUND('',#99123,.F.); +#99123 = EDGE_LOOP('',(#99124,#99130,#99131,#99132)); +#99124 = ORIENTED_EDGE('',*,*,#99125,.F.); +#99125 = EDGE_CURVE('',#99101,#99076,#99126,.T.); +#99126 = LINE('',#99127,#99128); +#99127 = CARTESIAN_POINT('',(6.15,0.75,0.)); +#99128 = VECTOR('',#99129,1.); +#99129 = DIRECTION('',(-1.,0.,0.)); +#99130 = ORIENTED_EDGE('',*,*,#99109,.T.); +#99131 = ORIENTED_EDGE('',*,*,#98701,.T.); +#99132 = ORIENTED_EDGE('',*,*,#99086,.F.); +#99133 = PLANE('',#99134); +#99134 = AXIS2_PLACEMENT_3D('',#99135,#99136,#99137); +#99135 = CARTESIAN_POINT('',(6.15,0.75,0.)); +#99136 = DIRECTION('',(0.,-1.,0.)); +#99137 = DIRECTION('',(-1.,0.,0.)); +#99138 = ADVANCED_FACE('',(#99139),#99142,.F.); +#99139 = FACE_BOUND('',#99140,.T.); +#99140 = EDGE_LOOP('',(#99141)); +#99141 = ORIENTED_EDGE('',*,*,#98726,.T.); +#99142 = PLANE('',#99143); +#99143 = AXIS2_PLACEMENT_3D('',#99144,#99145,#99146); +#99144 = CARTESIAN_POINT('',(5.65,-4.25,4.1)); +#99145 = DIRECTION('',(0.,0.,-1.)); +#99146 = DIRECTION('',(-1.,0.,0.)); +#99147 = ADVANCED_FACE('',(#99148),#99168,.T.); +#99148 = FACE_BOUND('',#99149,.T.); +#99149 = EDGE_LOOP('',(#99150,#99151,#99160,#99167)); +#99150 = ORIENTED_EDGE('',*,*,#98751,.T.); +#99151 = ORIENTED_EDGE('',*,*,#99152,.F.); +#99152 = EDGE_CURVE('',#99153,#98744,#99155,.T.); +#99153 = VERTEX_POINT('',#99154); +#99154 = CARTESIAN_POINT('',(4.8,-2.25,4.3)); +#99155 = CIRCLE('',#99156,0.1); +#99156 = AXIS2_PLACEMENT_3D('',#99157,#99158,#99159); +#99157 = CARTESIAN_POINT('',(4.8,-2.25,4.2)); +#99158 = DIRECTION('',(-0.,1.,0.)); +#99159 = DIRECTION('',(1.,0.,0.)); +#99160 = ORIENTED_EDGE('',*,*,#99161,.F.); +#99161 = EDGE_CURVE('',#99153,#99153,#99162,.T.); +#99162 = CIRCLE('',#99163,1.65); +#99163 = AXIS2_PLACEMENT_3D('',#99164,#99165,#99166); +#99164 = CARTESIAN_POINT('',(3.15,-2.25,4.3)); +#99165 = DIRECTION('',(0.,0.,1.)); +#99166 = DIRECTION('',(1.,0.,-0.)); +#99167 = ORIENTED_EDGE('',*,*,#99152,.T.); +#99168 = TOROIDAL_SURFACE('',#99169,1.65,0.1); +#99169 = AXIS2_PLACEMENT_3D('',#99170,#99171,#99172); +#99170 = CARTESIAN_POINT('',(3.15,-2.25,4.2)); +#99171 = DIRECTION('',(0.,0.,-1.)); +#99172 = DIRECTION('',(1.,0.,0.)); +#99173 = ADVANCED_FACE('',(#99174),#99177,.F.); +#99174 = FACE_BOUND('',#99175,.T.); +#99175 = EDGE_LOOP('',(#99176)); +#99176 = ORIENTED_EDGE('',*,*,#98776,.T.); +#99177 = PLANE('',#99178); +#99178 = AXIS2_PLACEMENT_3D('',#99179,#99180,#99181); +#99179 = CARTESIAN_POINT('',(1.65,-0.25,4.1)); +#99180 = DIRECTION('',(0.,0.,-1.)); +#99181 = DIRECTION('',(-1.,0.,0.)); +#99182 = ADVANCED_FACE('',(#99183),#99186,.F.); +#99183 = FACE_BOUND('',#99184,.T.); +#99184 = EDGE_LOOP('',(#99185)); +#99185 = ORIENTED_EDGE('',*,*,#98801,.T.); +#99186 = PLANE('',#99187); +#99187 = AXIS2_PLACEMENT_3D('',#99188,#99189,#99190); +#99188 = CARTESIAN_POINT('',(5.65,-0.25,4.1)); +#99189 = DIRECTION('',(0.,0.,-1.)); +#99190 = DIRECTION('',(-1.,0.,0.)); +#99191 = ADVANCED_FACE('',(#99192),#99230,.T.); +#99192 = FACE_BOUND('',#99193,.T.); +#99193 = EDGE_LOOP('',(#99194,#99195,#99196,#99197,#99203,#99204,#99210, + #99211,#99212,#99213,#99214,#99215,#99221,#99222,#99228,#99229)); +#99194 = ORIENTED_EDGE('',*,*,#98818,.F.); +#99195 = ORIENTED_EDGE('',*,*,#98859,.T.); +#99196 = ORIENTED_EDGE('',*,*,#98917,.F.); +#99197 = ORIENTED_EDGE('',*,*,#99198,.F.); +#99198 = EDGE_CURVE('',#98942,#98918,#99199,.T.); +#99199 = LINE('',#99200,#99201); +#99200 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#99201 = VECTOR('',#99202,1.); +#99202 = DIRECTION('',(0.,-1.,0.)); +#99203 = ORIENTED_EDGE('',*,*,#98949,.F.); +#99204 = ORIENTED_EDGE('',*,*,#99205,.F.); +#99205 = EDGE_CURVE('',#98902,#98950,#99206,.T.); +#99206 = LINE('',#99207,#99208); +#99207 = CARTESIAN_POINT('',(0.15,0.75,0.)); +#99208 = VECTOR('',#99209,1.); +#99209 = DIRECTION('',(0.,-1.,0.)); +#99210 = ORIENTED_EDGE('',*,*,#98899,.F.); +#99211 = ORIENTED_EDGE('',*,*,#99075,.F.); +#99212 = ORIENTED_EDGE('',*,*,#99125,.F.); +#99213 = ORIENTED_EDGE('',*,*,#99100,.F.); +#99214 = ORIENTED_EDGE('',*,*,#99005,.F.); +#99215 = ORIENTED_EDGE('',*,*,#99216,.F.); +#99216 = EDGE_CURVE('',#99030,#99006,#99217,.T.); +#99217 = LINE('',#99218,#99219); +#99218 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99219 = VECTOR('',#99220,1.); +#99220 = DIRECTION('',(0.,1.,0.)); +#99221 = ORIENTED_EDGE('',*,*,#99037,.F.); +#99222 = ORIENTED_EDGE('',*,*,#99223,.F.); +#99223 = EDGE_CURVE('',#98988,#99038,#99224,.T.); +#99224 = LINE('',#99225,#99226); +#99225 = CARTESIAN_POINT('',(6.15,-5.25,0.)); +#99226 = VECTOR('',#99227,1.); +#99227 = DIRECTION('',(0.,1.,0.)); +#99228 = ORIENTED_EDGE('',*,*,#98987,.F.); +#99229 = ORIENTED_EDGE('',*,*,#98874,.F.); +#99230 = PLANE('',#99231); +#99231 = AXIS2_PLACEMENT_3D('',#99232,#99233,#99234); +#99232 = CARTESIAN_POINT('',(0.15,-5.25,0.)); +#99233 = DIRECTION('',(0.,0.,-1.)); +#99234 = DIRECTION('',(-1.,0.,0.)); +#99235 = ADVANCED_FACE('',(#99236),#99380,.F.); +#99236 = FACE_BOUND('',#99237,.F.); +#99237 = EDGE_LOOP('',(#99238,#99248,#99257,#99265,#99274,#99282,#99290, + #99298,#99307,#99315,#99324,#99332,#99341,#99347,#99348,#99356, + #99365,#99373)); +#99238 = ORIENTED_EDGE('',*,*,#99239,.T.); +#99239 = EDGE_CURVE('',#99240,#99242,#99244,.T.); +#99240 = VERTEX_POINT('',#99241); +#99241 = CARTESIAN_POINT('',(-0.162230377286,0.35,-0.540767924286)); +#99242 = VERTEX_POINT('',#99243); +#99243 = CARTESIAN_POINT('',(-0.425000733956,0.35,-1.416669113186)); +#99244 = LINE('',#99245,#99246); +#99245 = CARTESIAN_POINT('',(-0.15,0.35,-0.5)); +#99246 = VECTOR('',#99247,1.); +#99247 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99248 = ORIENTED_EDGE('',*,*,#99249,.T.); +#99249 = EDGE_CURVE('',#99242,#99250,#99252,.T.); +#99250 = VERTEX_POINT('',#99251); +#99251 = CARTESIAN_POINT('',(-0.425000733956,0.35,-1.583330886814)); +#99252 = CIRCLE('',#99253,0.29); +#99253 = AXIS2_PLACEMENT_3D('',#99254,#99255,#99256); +#99254 = CARTESIAN_POINT('',(-0.147231111242,0.35,-1.5)); +#99255 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99256 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99257 = ORIENTED_EDGE('',*,*,#99258,.T.); +#99258 = EDGE_CURVE('',#99250,#99259,#99261,.T.); +#99259 = VERTEX_POINT('',#99260); +#99260 = CARTESIAN_POINT('',(-0.162230377286,0.35,-2.459232075714)); +#99261 = LINE('',#99262,#99263); +#99262 = CARTESIAN_POINT('',(-0.45,0.35,-1.5)); +#99263 = VECTOR('',#99264,1.); +#99264 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99265 = ORIENTED_EDGE('',*,*,#99266,.F.); +#99266 = EDGE_CURVE('',#99267,#99259,#99269,.T.); +#99267 = VERTEX_POINT('',#99268); +#99268 = CARTESIAN_POINT('',(-0.15,0.35,-2.542562962528)); +#99269 = CIRCLE('',#99270,0.29); +#99270 = AXIS2_PLACEMENT_3D('',#99271,#99272,#99273); +#99271 = CARTESIAN_POINT('',(-0.44,0.35,-2.542562962528)); +#99272 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99273 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99274 = ORIENTED_EDGE('',*,*,#99275,.F.); +#99275 = EDGE_CURVE('',#99276,#99267,#99278,.T.); +#99276 = VERTEX_POINT('',#99277); +#99277 = CARTESIAN_POINT('',(-0.15,0.35,-3.5)); +#99278 = LINE('',#99279,#99280); +#99279 = CARTESIAN_POINT('',(-0.15,0.35,-3.5)); +#99280 = VECTOR('',#99281,1.); +#99281 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99282 = ORIENTED_EDGE('',*,*,#99283,.F.); +#99283 = EDGE_CURVE('',#99284,#99276,#99286,.T.); +#99284 = VERTEX_POINT('',#99285); +#99285 = CARTESIAN_POINT('',(0.15,0.35,-3.5)); +#99286 = LINE('',#99287,#99288); +#99287 = CARTESIAN_POINT('',(0.15,0.35,-3.5)); +#99288 = VECTOR('',#99289,1.); +#99289 = DIRECTION('',(-1.,-0.,0.)); +#99290 = ORIENTED_EDGE('',*,*,#99291,.F.); +#99291 = EDGE_CURVE('',#99292,#99284,#99294,.T.); +#99292 = VERTEX_POINT('',#99293); +#99293 = CARTESIAN_POINT('',(0.15,0.35,-2.542562962528)); +#99294 = LINE('',#99295,#99296); +#99295 = CARTESIAN_POINT('',(0.15,0.35,-2.5)); +#99296 = VECTOR('',#99297,1.); +#99297 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99298 = ORIENTED_EDGE('',*,*,#99299,.F.); +#99299 = EDGE_CURVE('',#99300,#99292,#99302,.T.); +#99300 = VERTEX_POINT('',#99301); +#99301 = CARTESIAN_POINT('',(0.137769622714,0.35,-2.459232075714)); +#99302 = CIRCLE('',#99303,0.29); +#99303 = AXIS2_PLACEMENT_3D('',#99304,#99305,#99306); +#99304 = CARTESIAN_POINT('',(-0.14,0.35,-2.542562962528)); +#99305 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99306 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99307 = ORIENTED_EDGE('',*,*,#99308,.T.); +#99308 = EDGE_CURVE('',#99300,#99309,#99311,.T.); +#99309 = VERTEX_POINT('',#99310); +#99310 = CARTESIAN_POINT('',(-0.125000733956,0.35,-1.583330886814)); +#99311 = LINE('',#99312,#99313); +#99312 = CARTESIAN_POINT('',(0.15,0.35,-2.5)); +#99313 = VECTOR('',#99314,1.); +#99314 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99315 = ORIENTED_EDGE('',*,*,#99316,.F.); +#99316 = EDGE_CURVE('',#99317,#99309,#99319,.T.); +#99317 = VERTEX_POINT('',#99318); +#99318 = CARTESIAN_POINT('',(-0.125000733956,0.35,-1.416669113186)); +#99319 = CIRCLE('',#99320,0.29); +#99320 = AXIS2_PLACEMENT_3D('',#99321,#99322,#99323); +#99321 = CARTESIAN_POINT('',(0.152768888758,0.35,-1.5)); +#99322 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99323 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99324 = ORIENTED_EDGE('',*,*,#99325,.T.); +#99325 = EDGE_CURVE('',#99317,#99326,#99328,.T.); +#99326 = VERTEX_POINT('',#99327); +#99327 = CARTESIAN_POINT('',(0.137769622714,0.35,-0.540767924286)); +#99328 = LINE('',#99329,#99330); +#99329 = CARTESIAN_POINT('',(-0.15,0.35,-1.5)); +#99330 = VECTOR('',#99331,1.); +#99331 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99332 = ORIENTED_EDGE('',*,*,#99333,.F.); +#99333 = EDGE_CURVE('',#99334,#99326,#99336,.T.); +#99334 = VERTEX_POINT('',#99335); +#99335 = CARTESIAN_POINT('',(0.15,0.35,-0.457437037472)); +#99336 = CIRCLE('',#99337,0.29); +#99337 = AXIS2_PLACEMENT_3D('',#99338,#99339,#99340); +#99338 = CARTESIAN_POINT('',(-0.14,0.35,-0.457437037472)); +#99339 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99340 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99341 = ORIENTED_EDGE('',*,*,#99342,.F.); +#99342 = EDGE_CURVE('',#98902,#99334,#99343,.T.); +#99343 = LINE('',#99344,#99345); +#99344 = CARTESIAN_POINT('',(0.15,0.35,1.5)); +#99345 = VECTOR('',#99346,1.); +#99346 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99347 = ORIENTED_EDGE('',*,*,#98973,.F.); +#99348 = ORIENTED_EDGE('',*,*,#99349,.F.); +#99349 = EDGE_CURVE('',#99350,#98966,#99352,.T.); +#99350 = VERTEX_POINT('',#99351); +#99351 = CARTESIAN_POINT('',(0.14,0.35,1.5)); +#99352 = LINE('',#99353,#99354); +#99353 = CARTESIAN_POINT('',(-0.15,0.35,1.5)); +#99354 = VECTOR('',#99355,1.); +#99355 = DIRECTION('',(1.,0.,0.)); +#99356 = ORIENTED_EDGE('',*,*,#99357,.F.); +#99357 = EDGE_CURVE('',#99358,#99350,#99360,.T.); +#99358 = VERTEX_POINT('',#99359); +#99359 = CARTESIAN_POINT('',(-0.15,0.35,1.21)); +#99360 = CIRCLE('',#99361,0.29); +#99361 = AXIS2_PLACEMENT_3D('',#99362,#99363,#99364); +#99362 = CARTESIAN_POINT('',(0.14,0.35,1.21)); +#99363 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99364 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99365 = ORIENTED_EDGE('',*,*,#99366,.F.); +#99366 = EDGE_CURVE('',#99367,#99358,#99369,.T.); +#99367 = VERTEX_POINT('',#99368); +#99368 = CARTESIAN_POINT('',(-0.15,0.35,-0.457437037472)); +#99369 = LINE('',#99370,#99371); +#99370 = CARTESIAN_POINT('',(-0.15,0.35,-0.5)); +#99371 = VECTOR('',#99372,1.); +#99372 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99373 = ORIENTED_EDGE('',*,*,#99374,.F.); +#99374 = EDGE_CURVE('',#99240,#99367,#99375,.T.); +#99375 = CIRCLE('',#99376,0.29); +#99376 = AXIS2_PLACEMENT_3D('',#99377,#99378,#99379); +#99377 = CARTESIAN_POINT('',(-0.44,0.35,-0.457437037472)); +#99378 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99379 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99380 = PLANE('',#99381); +#99381 = AXIS2_PLACEMENT_3D('',#99382,#99383,#99384); +#99382 = CARTESIAN_POINT('',(-0.15,0.35,-0.5)); +#99383 = DIRECTION('',(1.64346021921E-31,-1.,-5.551115123126E-16)); +#99384 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99385 = ADVANCED_FACE('',(#99386),#99404,.F.); +#99386 = FACE_BOUND('',#99387,.F.); +#99387 = EDGE_LOOP('',(#99388,#99396,#99402,#99403)); +#99388 = ORIENTED_EDGE('',*,*,#99389,.F.); +#99389 = EDGE_CURVE('',#99390,#98958,#99392,.T.); +#99390 = VERTEX_POINT('',#99391); +#99391 = CARTESIAN_POINT('',(0.14,-0.35,1.5)); +#99392 = LINE('',#99393,#99394); +#99393 = CARTESIAN_POINT('',(-0.15,-0.35,1.5)); +#99394 = VECTOR('',#99395,1.); +#99395 = DIRECTION('',(1.,0.,0.)); +#99396 = ORIENTED_EDGE('',*,*,#99397,.T.); +#99397 = EDGE_CURVE('',#99390,#99350,#99398,.T.); +#99398 = LINE('',#99399,#99400); +#99399 = CARTESIAN_POINT('',(0.14,-0.35,1.5)); +#99400 = VECTOR('',#99401,1.); +#99401 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99402 = ORIENTED_EDGE('',*,*,#99349,.T.); +#99403 = ORIENTED_EDGE('',*,*,#98965,.F.); +#99404 = PLANE('',#99405); +#99405 = AXIS2_PLACEMENT_3D('',#99406,#99407,#99408); +#99406 = CARTESIAN_POINT('',(-0.15,-0.35,1.5)); +#99407 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99408 = DIRECTION('',(1.,0.,0.)); +#99409 = ADVANCED_FACE('',(#99410),#99547,.T.); +#99410 = FACE_BOUND('',#99411,.T.); +#99411 = EDGE_LOOP('',(#99412,#99422,#99431,#99439,#99448,#99456,#99464, + #99472,#99481,#99489,#99498,#99506,#99515,#99521,#99522,#99523, + #99532,#99540)); +#99412 = ORIENTED_EDGE('',*,*,#99413,.T.); +#99413 = EDGE_CURVE('',#99414,#99416,#99418,.T.); +#99414 = VERTEX_POINT('',#99415); +#99415 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-0.540767924286)); +#99416 = VERTEX_POINT('',#99417); +#99417 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.416669113186)); +#99418 = LINE('',#99419,#99420); +#99419 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#99420 = VECTOR('',#99421,1.); +#99421 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99422 = ORIENTED_EDGE('',*,*,#99423,.T.); +#99423 = EDGE_CURVE('',#99416,#99424,#99426,.T.); +#99424 = VERTEX_POINT('',#99425); +#99425 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.583330886814)); +#99426 = CIRCLE('',#99427,0.29); +#99427 = AXIS2_PLACEMENT_3D('',#99428,#99429,#99430); +#99428 = CARTESIAN_POINT('',(-0.147231111242,-0.35,-1.5)); +#99429 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99430 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99431 = ORIENTED_EDGE('',*,*,#99432,.T.); +#99432 = EDGE_CURVE('',#99424,#99433,#99435,.T.); +#99433 = VERTEX_POINT('',#99434); +#99434 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-2.459232075714)); +#99435 = LINE('',#99436,#99437); +#99436 = CARTESIAN_POINT('',(-0.45,-0.35,-1.5)); +#99437 = VECTOR('',#99438,1.); +#99438 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99439 = ORIENTED_EDGE('',*,*,#99440,.F.); +#99440 = EDGE_CURVE('',#99441,#99433,#99443,.T.); +#99441 = VERTEX_POINT('',#99442); +#99442 = CARTESIAN_POINT('',(-0.15,-0.35,-2.542562962528)); +#99443 = CIRCLE('',#99444,0.29); +#99444 = AXIS2_PLACEMENT_3D('',#99445,#99446,#99447); +#99445 = CARTESIAN_POINT('',(-0.44,-0.35,-2.542562962528)); +#99446 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99447 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99448 = ORIENTED_EDGE('',*,*,#99449,.F.); +#99449 = EDGE_CURVE('',#99450,#99441,#99452,.T.); +#99450 = VERTEX_POINT('',#99451); +#99451 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#99452 = LINE('',#99453,#99454); +#99453 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#99454 = VECTOR('',#99455,1.); +#99455 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99456 = ORIENTED_EDGE('',*,*,#99457,.F.); +#99457 = EDGE_CURVE('',#99458,#99450,#99460,.T.); +#99458 = VERTEX_POINT('',#99459); +#99459 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#99460 = LINE('',#99461,#99462); +#99461 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#99462 = VECTOR('',#99463,1.); +#99463 = DIRECTION('',(-1.,-0.,0.)); +#99464 = ORIENTED_EDGE('',*,*,#99465,.F.); +#99465 = EDGE_CURVE('',#99466,#99458,#99468,.T.); +#99466 = VERTEX_POINT('',#99467); +#99467 = CARTESIAN_POINT('',(0.15,-0.35,-2.542562962528)); +#99468 = LINE('',#99469,#99470); +#99469 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#99470 = VECTOR('',#99471,1.); +#99471 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99472 = ORIENTED_EDGE('',*,*,#99473,.F.); +#99473 = EDGE_CURVE('',#99474,#99466,#99476,.T.); +#99474 = VERTEX_POINT('',#99475); +#99475 = CARTESIAN_POINT('',(0.137769622714,-0.35,-2.459232075714)); +#99476 = CIRCLE('',#99477,0.29); +#99477 = AXIS2_PLACEMENT_3D('',#99478,#99479,#99480); +#99478 = CARTESIAN_POINT('',(-0.14,-0.35,-2.542562962528)); +#99479 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99480 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99481 = ORIENTED_EDGE('',*,*,#99482,.T.); +#99482 = EDGE_CURVE('',#99474,#99483,#99485,.T.); +#99483 = VERTEX_POINT('',#99484); +#99484 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.583330886814)); +#99485 = LINE('',#99486,#99487); +#99486 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#99487 = VECTOR('',#99488,1.); +#99488 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99489 = ORIENTED_EDGE('',*,*,#99490,.F.); +#99490 = EDGE_CURVE('',#99491,#99483,#99493,.T.); +#99491 = VERTEX_POINT('',#99492); +#99492 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.416669113186)); +#99493 = CIRCLE('',#99494,0.29); +#99494 = AXIS2_PLACEMENT_3D('',#99495,#99496,#99497); +#99495 = CARTESIAN_POINT('',(0.152768888758,-0.35,-1.5)); +#99496 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99497 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99498 = ORIENTED_EDGE('',*,*,#99499,.T.); +#99499 = EDGE_CURVE('',#99491,#99500,#99502,.T.); +#99500 = VERTEX_POINT('',#99501); +#99501 = CARTESIAN_POINT('',(0.137769622714,-0.35,-0.540767924286)); +#99502 = LINE('',#99503,#99504); +#99503 = CARTESIAN_POINT('',(-0.15,-0.35,-1.5)); +#99504 = VECTOR('',#99505,1.); +#99505 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99506 = ORIENTED_EDGE('',*,*,#99507,.F.); +#99507 = EDGE_CURVE('',#99508,#99500,#99510,.T.); +#99508 = VERTEX_POINT('',#99509); +#99509 = CARTESIAN_POINT('',(0.15,-0.35,-0.457437037472)); +#99510 = CIRCLE('',#99511,0.29); +#99511 = AXIS2_PLACEMENT_3D('',#99512,#99513,#99514); +#99512 = CARTESIAN_POINT('',(-0.14,-0.35,-0.457437037472)); +#99513 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99514 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99515 = ORIENTED_EDGE('',*,*,#99516,.F.); +#99516 = EDGE_CURVE('',#98950,#99508,#99517,.T.); +#99517 = LINE('',#99518,#99519); +#99518 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#99519 = VECTOR('',#99520,1.); +#99520 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99521 = ORIENTED_EDGE('',*,*,#98957,.F.); +#99522 = ORIENTED_EDGE('',*,*,#99389,.F.); +#99523 = ORIENTED_EDGE('',*,*,#99524,.F.); +#99524 = EDGE_CURVE('',#99525,#99390,#99527,.T.); +#99525 = VERTEX_POINT('',#99526); +#99526 = CARTESIAN_POINT('',(-0.15,-0.35,1.21)); +#99527 = CIRCLE('',#99528,0.29); +#99528 = AXIS2_PLACEMENT_3D('',#99529,#99530,#99531); +#99529 = CARTESIAN_POINT('',(0.14,-0.35,1.21)); +#99530 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99531 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99532 = ORIENTED_EDGE('',*,*,#99533,.F.); +#99533 = EDGE_CURVE('',#99534,#99525,#99536,.T.); +#99534 = VERTEX_POINT('',#99535); +#99535 = CARTESIAN_POINT('',(-0.15,-0.35,-0.457437037472)); +#99536 = LINE('',#99537,#99538); +#99537 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#99538 = VECTOR('',#99539,1.); +#99539 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99540 = ORIENTED_EDGE('',*,*,#99541,.F.); +#99541 = EDGE_CURVE('',#99414,#99534,#99542,.T.); +#99542 = CIRCLE('',#99543,0.29); +#99543 = AXIS2_PLACEMENT_3D('',#99544,#99545,#99546); +#99544 = CARTESIAN_POINT('',(-0.44,-0.35,-0.457437037472)); +#99545 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99546 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99547 = PLANE('',#99548); +#99548 = AXIS2_PLACEMENT_3D('',#99549,#99550,#99551); +#99549 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#99550 = DIRECTION('',(1.64346021921E-31,-1.,-5.551115123126E-16)); +#99551 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99552 = ADVANCED_FACE('',(#99553),#99697,.T.); +#99553 = FACE_BOUND('',#99554,.T.); +#99554 = EDGE_LOOP('',(#99555,#99565,#99574,#99582,#99591,#99599,#99607, + #99615,#99624,#99632,#99641,#99649,#99658,#99664,#99665,#99673, + #99682,#99690)); +#99555 = ORIENTED_EDGE('',*,*,#99556,.T.); +#99556 = EDGE_CURVE('',#99557,#99559,#99561,.T.); +#99557 = VERTEX_POINT('',#99558); +#99558 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-0.540767924286)); +#99559 = VERTEX_POINT('',#99560); +#99560 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.416669113186)); +#99561 = LINE('',#99562,#99563); +#99562 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#99563 = VECTOR('',#99564,1.); +#99564 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99565 = ORIENTED_EDGE('',*,*,#99566,.T.); +#99566 = EDGE_CURVE('',#99559,#99567,#99569,.T.); +#99567 = VERTEX_POINT('',#99568); +#99568 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.583330886814)); +#99569 = CIRCLE('',#99570,0.29); +#99570 = AXIS2_PLACEMENT_3D('',#99571,#99572,#99573); +#99571 = CARTESIAN_POINT('',(-0.147231111242,-4.85,-1.5)); +#99572 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99573 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99574 = ORIENTED_EDGE('',*,*,#99575,.T.); +#99575 = EDGE_CURVE('',#99567,#99576,#99578,.T.); +#99576 = VERTEX_POINT('',#99577); +#99577 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-2.459232075714)); +#99578 = LINE('',#99579,#99580); +#99579 = CARTESIAN_POINT('',(-0.45,-4.85,-1.5)); +#99580 = VECTOR('',#99581,1.); +#99581 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99582 = ORIENTED_EDGE('',*,*,#99583,.F.); +#99583 = EDGE_CURVE('',#99584,#99576,#99586,.T.); +#99584 = VERTEX_POINT('',#99585); +#99585 = CARTESIAN_POINT('',(-0.15,-4.85,-2.542562962528)); +#99586 = CIRCLE('',#99587,0.29); +#99587 = AXIS2_PLACEMENT_3D('',#99588,#99589,#99590); +#99588 = CARTESIAN_POINT('',(-0.44,-4.85,-2.542562962528)); +#99589 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99590 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99591 = ORIENTED_EDGE('',*,*,#99592,.F.); +#99592 = EDGE_CURVE('',#99593,#99584,#99595,.T.); +#99593 = VERTEX_POINT('',#99594); +#99594 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#99595 = LINE('',#99596,#99597); +#99596 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#99597 = VECTOR('',#99598,1.); +#99598 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99599 = ORIENTED_EDGE('',*,*,#99600,.F.); +#99600 = EDGE_CURVE('',#99601,#99593,#99603,.T.); +#99601 = VERTEX_POINT('',#99602); +#99602 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#99603 = LINE('',#99604,#99605); +#99604 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#99605 = VECTOR('',#99606,1.); +#99606 = DIRECTION('',(-1.,-0.,0.)); +#99607 = ORIENTED_EDGE('',*,*,#99608,.F.); +#99608 = EDGE_CURVE('',#99609,#99601,#99611,.T.); +#99609 = VERTEX_POINT('',#99610); +#99610 = CARTESIAN_POINT('',(0.15,-4.85,-2.542562962528)); +#99611 = LINE('',#99612,#99613); +#99612 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#99613 = VECTOR('',#99614,1.); +#99614 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99615 = ORIENTED_EDGE('',*,*,#99616,.F.); +#99616 = EDGE_CURVE('',#99617,#99609,#99619,.T.); +#99617 = VERTEX_POINT('',#99618); +#99618 = CARTESIAN_POINT('',(0.137769622714,-4.85,-2.459232075714)); +#99619 = CIRCLE('',#99620,0.29); +#99620 = AXIS2_PLACEMENT_3D('',#99621,#99622,#99623); +#99621 = CARTESIAN_POINT('',(-0.14,-4.85,-2.542562962528)); +#99622 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99623 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99624 = ORIENTED_EDGE('',*,*,#99625,.T.); +#99625 = EDGE_CURVE('',#99617,#99626,#99628,.T.); +#99626 = VERTEX_POINT('',#99627); +#99627 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.583330886814)); +#99628 = LINE('',#99629,#99630); +#99629 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#99630 = VECTOR('',#99631,1.); +#99631 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99632 = ORIENTED_EDGE('',*,*,#99633,.F.); +#99633 = EDGE_CURVE('',#99634,#99626,#99636,.T.); +#99634 = VERTEX_POINT('',#99635); +#99635 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.416669113186)); +#99636 = CIRCLE('',#99637,0.29); +#99637 = AXIS2_PLACEMENT_3D('',#99638,#99639,#99640); +#99638 = CARTESIAN_POINT('',(0.152768888758,-4.85,-1.5)); +#99639 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99640 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99641 = ORIENTED_EDGE('',*,*,#99642,.T.); +#99642 = EDGE_CURVE('',#99634,#99643,#99645,.T.); +#99643 = VERTEX_POINT('',#99644); +#99644 = CARTESIAN_POINT('',(0.137769622714,-4.85,-0.540767924286)); +#99645 = LINE('',#99646,#99647); +#99646 = CARTESIAN_POINT('',(-0.15,-4.85,-1.5)); +#99647 = VECTOR('',#99648,1.); +#99648 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99649 = ORIENTED_EDGE('',*,*,#99650,.F.); +#99650 = EDGE_CURVE('',#99651,#99643,#99653,.T.); +#99651 = VERTEX_POINT('',#99652); +#99652 = CARTESIAN_POINT('',(0.15,-4.85,-0.457437037472)); +#99653 = CIRCLE('',#99654,0.29); +#99654 = AXIS2_PLACEMENT_3D('',#99655,#99656,#99657); +#99655 = CARTESIAN_POINT('',(-0.14,-4.85,-0.457437037472)); +#99656 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99657 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99658 = ORIENTED_EDGE('',*,*,#99659,.F.); +#99659 = EDGE_CURVE('',#98918,#99651,#99660,.T.); +#99660 = LINE('',#99661,#99662); +#99661 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#99662 = VECTOR('',#99663,1.); +#99663 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99664 = ORIENTED_EDGE('',*,*,#98925,.F.); +#99665 = ORIENTED_EDGE('',*,*,#99666,.F.); +#99666 = EDGE_CURVE('',#99667,#98926,#99669,.T.); +#99667 = VERTEX_POINT('',#99668); +#99668 = CARTESIAN_POINT('',(0.14,-4.85,1.5)); +#99669 = LINE('',#99670,#99671); +#99670 = CARTESIAN_POINT('',(-0.15,-4.85,1.5)); +#99671 = VECTOR('',#99672,1.); +#99672 = DIRECTION('',(1.,0.,0.)); +#99673 = ORIENTED_EDGE('',*,*,#99674,.F.); +#99674 = EDGE_CURVE('',#99675,#99667,#99677,.T.); +#99675 = VERTEX_POINT('',#99676); +#99676 = CARTESIAN_POINT('',(-0.15,-4.85,1.21)); +#99677 = CIRCLE('',#99678,0.29); +#99678 = AXIS2_PLACEMENT_3D('',#99679,#99680,#99681); +#99679 = CARTESIAN_POINT('',(0.14,-4.85,1.21)); +#99680 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99681 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99682 = ORIENTED_EDGE('',*,*,#99683,.F.); +#99683 = EDGE_CURVE('',#99684,#99675,#99686,.T.); +#99684 = VERTEX_POINT('',#99685); +#99685 = CARTESIAN_POINT('',(-0.15,-4.85,-0.457437037472)); +#99686 = LINE('',#99687,#99688); +#99687 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#99688 = VECTOR('',#99689,1.); +#99689 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99690 = ORIENTED_EDGE('',*,*,#99691,.F.); +#99691 = EDGE_CURVE('',#99557,#99684,#99692,.T.); +#99692 = CIRCLE('',#99693,0.29); +#99693 = AXIS2_PLACEMENT_3D('',#99694,#99695,#99696); +#99694 = CARTESIAN_POINT('',(-0.44,-4.85,-0.457437037472)); +#99695 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99696 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99697 = PLANE('',#99698); +#99698 = AXIS2_PLACEMENT_3D('',#99699,#99700,#99701); +#99699 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#99700 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99701 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99702 = ADVANCED_FACE('',(#99703),#99847,.F.); +#99703 = FACE_BOUND('',#99704,.F.); +#99704 = EDGE_LOOP('',(#99705,#99715,#99724,#99732,#99741,#99749,#99757, + #99765,#99774,#99782,#99791,#99799,#99808,#99814,#99815,#99823, + #99832,#99840)); +#99705 = ORIENTED_EDGE('',*,*,#99706,.T.); +#99706 = EDGE_CURVE('',#99707,#99709,#99711,.T.); +#99707 = VERTEX_POINT('',#99708); +#99708 = CARTESIAN_POINT('',(-0.162230377286,-4.15,-0.540767924286)); +#99709 = VERTEX_POINT('',#99710); +#99710 = CARTESIAN_POINT('',(-0.425000733956,-4.15,-1.416669113186)); +#99711 = LINE('',#99712,#99713); +#99712 = CARTESIAN_POINT('',(-0.15,-4.15,-0.5)); +#99713 = VECTOR('',#99714,1.); +#99714 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99715 = ORIENTED_EDGE('',*,*,#99716,.T.); +#99716 = EDGE_CURVE('',#99709,#99717,#99719,.T.); +#99717 = VERTEX_POINT('',#99718); +#99718 = CARTESIAN_POINT('',(-0.425000733956,-4.15,-1.583330886814)); +#99719 = CIRCLE('',#99720,0.29); +#99720 = AXIS2_PLACEMENT_3D('',#99721,#99722,#99723); +#99721 = CARTESIAN_POINT('',(-0.147231111242,-4.15,-1.5)); +#99722 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99723 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99724 = ORIENTED_EDGE('',*,*,#99725,.T.); +#99725 = EDGE_CURVE('',#99717,#99726,#99728,.T.); +#99726 = VERTEX_POINT('',#99727); +#99727 = CARTESIAN_POINT('',(-0.162230377286,-4.15,-2.459232075714)); +#99728 = LINE('',#99729,#99730); +#99729 = CARTESIAN_POINT('',(-0.45,-4.15,-1.5)); +#99730 = VECTOR('',#99731,1.); +#99731 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99732 = ORIENTED_EDGE('',*,*,#99733,.F.); +#99733 = EDGE_CURVE('',#99734,#99726,#99736,.T.); +#99734 = VERTEX_POINT('',#99735); +#99735 = CARTESIAN_POINT('',(-0.15,-4.15,-2.542562962528)); +#99736 = CIRCLE('',#99737,0.29); +#99737 = AXIS2_PLACEMENT_3D('',#99738,#99739,#99740); +#99738 = CARTESIAN_POINT('',(-0.44,-4.15,-2.542562962528)); +#99739 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99740 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99741 = ORIENTED_EDGE('',*,*,#99742,.F.); +#99742 = EDGE_CURVE('',#99743,#99734,#99745,.T.); +#99743 = VERTEX_POINT('',#99744); +#99744 = CARTESIAN_POINT('',(-0.15,-4.15,-3.5)); +#99745 = LINE('',#99746,#99747); +#99746 = CARTESIAN_POINT('',(-0.15,-4.15,-3.5)); +#99747 = VECTOR('',#99748,1.); +#99748 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99749 = ORIENTED_EDGE('',*,*,#99750,.F.); +#99750 = EDGE_CURVE('',#99751,#99743,#99753,.T.); +#99751 = VERTEX_POINT('',#99752); +#99752 = CARTESIAN_POINT('',(0.15,-4.15,-3.5)); +#99753 = LINE('',#99754,#99755); +#99754 = CARTESIAN_POINT('',(0.15,-4.15,-3.5)); +#99755 = VECTOR('',#99756,1.); +#99756 = DIRECTION('',(-1.,-0.,0.)); +#99757 = ORIENTED_EDGE('',*,*,#99758,.F.); +#99758 = EDGE_CURVE('',#99759,#99751,#99761,.T.); +#99759 = VERTEX_POINT('',#99760); +#99760 = CARTESIAN_POINT('',(0.15,-4.15,-2.542562962528)); +#99761 = LINE('',#99762,#99763); +#99762 = CARTESIAN_POINT('',(0.15,-4.15,-2.5)); +#99763 = VECTOR('',#99764,1.); +#99764 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99765 = ORIENTED_EDGE('',*,*,#99766,.F.); +#99766 = EDGE_CURVE('',#99767,#99759,#99769,.T.); +#99767 = VERTEX_POINT('',#99768); +#99768 = CARTESIAN_POINT('',(0.137769622714,-4.15,-2.459232075714)); +#99769 = CIRCLE('',#99770,0.29); +#99770 = AXIS2_PLACEMENT_3D('',#99771,#99772,#99773); +#99771 = CARTESIAN_POINT('',(-0.14,-4.15,-2.542562962528)); +#99772 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99773 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99774 = ORIENTED_EDGE('',*,*,#99775,.T.); +#99775 = EDGE_CURVE('',#99767,#99776,#99778,.T.); +#99776 = VERTEX_POINT('',#99777); +#99777 = CARTESIAN_POINT('',(-0.125000733956,-4.15,-1.583330886814)); +#99778 = LINE('',#99779,#99780); +#99779 = CARTESIAN_POINT('',(0.15,-4.15,-2.5)); +#99780 = VECTOR('',#99781,1.); +#99781 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99782 = ORIENTED_EDGE('',*,*,#99783,.F.); +#99783 = EDGE_CURVE('',#99784,#99776,#99786,.T.); +#99784 = VERTEX_POINT('',#99785); +#99785 = CARTESIAN_POINT('',(-0.125000733956,-4.15,-1.416669113186)); +#99786 = CIRCLE('',#99787,0.29); +#99787 = AXIS2_PLACEMENT_3D('',#99788,#99789,#99790); +#99788 = CARTESIAN_POINT('',(0.152768888758,-4.15,-1.5)); +#99789 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99790 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99791 = ORIENTED_EDGE('',*,*,#99792,.T.); +#99792 = EDGE_CURVE('',#99784,#99793,#99795,.T.); +#99793 = VERTEX_POINT('',#99794); +#99794 = CARTESIAN_POINT('',(0.137769622714,-4.15,-0.540767924286)); +#99795 = LINE('',#99796,#99797); +#99796 = CARTESIAN_POINT('',(-0.15,-4.15,-1.5)); +#99797 = VECTOR('',#99798,1.); +#99798 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99799 = ORIENTED_EDGE('',*,*,#99800,.F.); +#99800 = EDGE_CURVE('',#99801,#99793,#99803,.T.); +#99801 = VERTEX_POINT('',#99802); +#99802 = CARTESIAN_POINT('',(0.15,-4.15,-0.457437037472)); +#99803 = CIRCLE('',#99804,0.29); +#99804 = AXIS2_PLACEMENT_3D('',#99805,#99806,#99807); +#99805 = CARTESIAN_POINT('',(-0.14,-4.15,-0.457437037472)); +#99806 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99807 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99808 = ORIENTED_EDGE('',*,*,#99809,.F.); +#99809 = EDGE_CURVE('',#98942,#99801,#99810,.T.); +#99810 = LINE('',#99811,#99812); +#99811 = CARTESIAN_POINT('',(0.15,-4.15,1.5)); +#99812 = VECTOR('',#99813,1.); +#99813 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99814 = ORIENTED_EDGE('',*,*,#98941,.F.); +#99815 = ORIENTED_EDGE('',*,*,#99816,.F.); +#99816 = EDGE_CURVE('',#99817,#98934,#99819,.T.); +#99817 = VERTEX_POINT('',#99818); +#99818 = CARTESIAN_POINT('',(0.14,-4.15,1.5)); +#99819 = LINE('',#99820,#99821); +#99820 = CARTESIAN_POINT('',(-0.15,-4.15,1.5)); +#99821 = VECTOR('',#99822,1.); +#99822 = DIRECTION('',(1.,0.,0.)); +#99823 = ORIENTED_EDGE('',*,*,#99824,.F.); +#99824 = EDGE_CURVE('',#99825,#99817,#99827,.T.); +#99825 = VERTEX_POINT('',#99826); +#99826 = CARTESIAN_POINT('',(-0.15,-4.15,1.21)); +#99827 = CIRCLE('',#99828,0.29); +#99828 = AXIS2_PLACEMENT_3D('',#99829,#99830,#99831); +#99829 = CARTESIAN_POINT('',(0.14,-4.15,1.21)); +#99830 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99831 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99832 = ORIENTED_EDGE('',*,*,#99833,.F.); +#99833 = EDGE_CURVE('',#99834,#99825,#99836,.T.); +#99834 = VERTEX_POINT('',#99835); +#99835 = CARTESIAN_POINT('',(-0.15,-4.15,-0.457437037472)); +#99836 = LINE('',#99837,#99838); +#99837 = CARTESIAN_POINT('',(-0.15,-4.15,-0.5)); +#99838 = VECTOR('',#99839,1.); +#99839 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99840 = ORIENTED_EDGE('',*,*,#99841,.F.); +#99841 = EDGE_CURVE('',#99707,#99834,#99842,.T.); +#99842 = CIRCLE('',#99843,0.29); +#99843 = AXIS2_PLACEMENT_3D('',#99844,#99845,#99846); +#99844 = CARTESIAN_POINT('',(-0.44,-4.15,-0.457437037472)); +#99845 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99846 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99847 = PLANE('',#99848); +#99848 = AXIS2_PLACEMENT_3D('',#99849,#99850,#99851); +#99849 = CARTESIAN_POINT('',(-0.15,-4.15,-0.5)); +#99850 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99851 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99852 = ADVANCED_FACE('',(#99853),#99864,.F.); +#99853 = FACE_BOUND('',#99854,.F.); +#99854 = EDGE_LOOP('',(#99855,#99856,#99862,#99863)); +#99855 = ORIENTED_EDGE('',*,*,#99666,.F.); +#99856 = ORIENTED_EDGE('',*,*,#99857,.T.); +#99857 = EDGE_CURVE('',#99667,#99817,#99858,.T.); +#99858 = LINE('',#99859,#99860); +#99859 = CARTESIAN_POINT('',(0.14,-4.85,1.5)); +#99860 = VECTOR('',#99861,1.); +#99861 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#99862 = ORIENTED_EDGE('',*,*,#99816,.T.); +#99863 = ORIENTED_EDGE('',*,*,#98933,.F.); +#99864 = PLANE('',#99865); +#99865 = AXIS2_PLACEMENT_3D('',#99866,#99867,#99868); +#99866 = CARTESIAN_POINT('',(-0.15,-4.85,1.5)); +#99867 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#99868 = DIRECTION('',(1.,0.,0.)); +#99869 = ADVANCED_FACE('',(#99870),#100014,.F.); +#99870 = FACE_BOUND('',#99871,.F.); +#99871 = EDGE_LOOP('',(#99872,#99882,#99891,#99899,#99908,#99916,#99924, + #99932,#99941,#99949,#99958,#99966,#99975,#99981,#99982,#99990, + #99999,#100007)); +#99872 = ORIENTED_EDGE('',*,*,#99873,.T.); +#99873 = EDGE_CURVE('',#99874,#99876,#99878,.T.); +#99874 = VERTEX_POINT('',#99875); +#99875 = CARTESIAN_POINT('',(6.462230377286,-4.85,-0.540767924286)); +#99876 = VERTEX_POINT('',#99877); +#99877 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.416669113186)); +#99878 = LINE('',#99879,#99880); +#99879 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#99880 = VECTOR('',#99881,1.); +#99881 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221) + ); +#99882 = ORIENTED_EDGE('',*,*,#99883,.T.); +#99883 = EDGE_CURVE('',#99876,#99884,#99886,.T.); +#99884 = VERTEX_POINT('',#99885); +#99885 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.583330886814)); +#99886 = CIRCLE('',#99887,0.29); +#99887 = AXIS2_PLACEMENT_3D('',#99888,#99889,#99890); +#99888 = CARTESIAN_POINT('',(6.447231111242,-4.85,-1.5)); +#99889 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99890 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99891 = ORIENTED_EDGE('',*,*,#99892,.T.); +#99892 = EDGE_CURVE('',#99884,#99893,#99895,.T.); +#99893 = VERTEX_POINT('',#99894); +#99894 = CARTESIAN_POINT('',(6.462230377286,-4.85,-2.459232075714)); +#99895 = LINE('',#99896,#99897); +#99896 = CARTESIAN_POINT('',(6.75,-4.85,-1.5)); +#99897 = VECTOR('',#99898,1.); +#99898 = DIRECTION('',(-0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#99899 = ORIENTED_EDGE('',*,*,#99900,.F.); +#99900 = EDGE_CURVE('',#99901,#99893,#99903,.T.); +#99901 = VERTEX_POINT('',#99902); +#99902 = CARTESIAN_POINT('',(6.45,-4.85,-2.542562962528)); +#99903 = CIRCLE('',#99904,0.29); +#99904 = AXIS2_PLACEMENT_3D('',#99905,#99906,#99907); +#99905 = CARTESIAN_POINT('',(6.74,-4.85,-2.542562962528)); +#99906 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99907 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99908 = ORIENTED_EDGE('',*,*,#99909,.F.); +#99909 = EDGE_CURVE('',#99910,#99901,#99912,.T.); +#99910 = VERTEX_POINT('',#99911); +#99911 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#99912 = LINE('',#99913,#99914); +#99913 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#99914 = VECTOR('',#99915,1.); +#99915 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#99916 = ORIENTED_EDGE('',*,*,#99917,.F.); +#99917 = EDGE_CURVE('',#99918,#99910,#99920,.T.); +#99918 = VERTEX_POINT('',#99919); +#99919 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#99920 = LINE('',#99921,#99922); +#99921 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#99922 = VECTOR('',#99923,1.); +#99923 = DIRECTION('',(1.,0.,0.)); +#99924 = ORIENTED_EDGE('',*,*,#99925,.F.); +#99925 = EDGE_CURVE('',#99926,#99918,#99928,.T.); +#99926 = VERTEX_POINT('',#99927); +#99927 = CARTESIAN_POINT('',(6.15,-4.85,-2.542562962528)); +#99928 = LINE('',#99929,#99930); +#99929 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#99930 = VECTOR('',#99931,1.); +#99931 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99932 = ORIENTED_EDGE('',*,*,#99933,.F.); +#99933 = EDGE_CURVE('',#99934,#99926,#99936,.T.); +#99934 = VERTEX_POINT('',#99935); +#99935 = CARTESIAN_POINT('',(6.162230377286,-4.85,-2.459232075714)); +#99936 = CIRCLE('',#99937,0.29); +#99937 = AXIS2_PLACEMENT_3D('',#99938,#99939,#99940); +#99938 = CARTESIAN_POINT('',(6.44,-4.85,-2.542562962528)); +#99939 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99940 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99941 = ORIENTED_EDGE('',*,*,#99942,.T.); +#99942 = EDGE_CURVE('',#99934,#99943,#99945,.T.); +#99943 = VERTEX_POINT('',#99944); +#99944 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.583330886814)); +#99945 = LINE('',#99946,#99947); +#99946 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#99947 = VECTOR('',#99948,1.); +#99948 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221) + ); +#99949 = ORIENTED_EDGE('',*,*,#99950,.F.); +#99950 = EDGE_CURVE('',#99951,#99943,#99953,.T.); +#99951 = VERTEX_POINT('',#99952); +#99952 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.416669113186)); +#99953 = CIRCLE('',#99954,0.29); +#99954 = AXIS2_PLACEMENT_3D('',#99955,#99956,#99957); +#99955 = CARTESIAN_POINT('',(6.147231111242,-4.85,-1.5)); +#99956 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#99957 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99958 = ORIENTED_EDGE('',*,*,#99959,.T.); +#99959 = EDGE_CURVE('',#99951,#99960,#99962,.T.); +#99960 = VERTEX_POINT('',#99961); +#99961 = CARTESIAN_POINT('',(6.162230377286,-4.85,-0.540767924286)); +#99962 = LINE('',#99963,#99964); +#99963 = CARTESIAN_POINT('',(6.45,-4.85,-1.5)); +#99964 = VECTOR('',#99965,1.); +#99965 = DIRECTION('',(-0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#99966 = ORIENTED_EDGE('',*,*,#99967,.F.); +#99967 = EDGE_CURVE('',#99968,#99960,#99970,.T.); +#99968 = VERTEX_POINT('',#99969); +#99969 = CARTESIAN_POINT('',(6.15,-4.85,-0.457437037472)); +#99970 = CIRCLE('',#99971,0.29); +#99971 = AXIS2_PLACEMENT_3D('',#99972,#99973,#99974); +#99972 = CARTESIAN_POINT('',(6.44,-4.85,-0.457437037472)); +#99973 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99974 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99975 = ORIENTED_EDGE('',*,*,#99976,.F.); +#99976 = EDGE_CURVE('',#98988,#99968,#99977,.T.); +#99977 = LINE('',#99978,#99979); +#99978 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#99979 = VECTOR('',#99980,1.); +#99980 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#99981 = ORIENTED_EDGE('',*,*,#99061,.F.); +#99982 = ORIENTED_EDGE('',*,*,#99983,.F.); +#99983 = EDGE_CURVE('',#99984,#99054,#99986,.T.); +#99984 = VERTEX_POINT('',#99985); +#99985 = CARTESIAN_POINT('',(6.16,-4.85,1.5)); +#99986 = LINE('',#99987,#99988); +#99987 = CARTESIAN_POINT('',(6.45,-4.85,1.5)); +#99988 = VECTOR('',#99989,1.); +#99989 = DIRECTION('',(-1.,-0.,0.)); +#99990 = ORIENTED_EDGE('',*,*,#99991,.F.); +#99991 = EDGE_CURVE('',#99992,#99984,#99994,.T.); +#99992 = VERTEX_POINT('',#99993); +#99993 = CARTESIAN_POINT('',(6.45,-4.85,1.21)); +#99994 = CIRCLE('',#99995,0.29); +#99995 = AXIS2_PLACEMENT_3D('',#99996,#99997,#99998); +#99996 = CARTESIAN_POINT('',(6.16,-4.85,1.21)); +#99997 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#99998 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#99999 = ORIENTED_EDGE('',*,*,#100000,.F.); +#100000 = EDGE_CURVE('',#100001,#99992,#100003,.T.); +#100001 = VERTEX_POINT('',#100002); +#100002 = CARTESIAN_POINT('',(6.45,-4.85,-0.457437037472)); +#100003 = LINE('',#100004,#100005); +#100004 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#100005 = VECTOR('',#100006,1.); +#100006 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100007 = ORIENTED_EDGE('',*,*,#100008,.F.); +#100008 = EDGE_CURVE('',#99874,#100001,#100009,.T.); +#100009 = CIRCLE('',#100010,0.29); +#100010 = AXIS2_PLACEMENT_3D('',#100011,#100012,#100013); +#100011 = CARTESIAN_POINT('',(6.74,-4.85,-0.457437037472)); +#100012 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100013 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100014 = PLANE('',#100015); +#100015 = AXIS2_PLACEMENT_3D('',#100016,#100017,#100018); +#100016 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#100017 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100018 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100019 = ADVANCED_FACE('',(#100020),#100038,.T.); +#100020 = FACE_BOUND('',#100021,.T.); +#100021 = EDGE_LOOP('',(#100022,#100023,#100031,#100037)); +#100022 = ORIENTED_EDGE('',*,*,#99983,.F.); +#100023 = ORIENTED_EDGE('',*,*,#100024,.T.); +#100024 = EDGE_CURVE('',#99984,#100025,#100027,.T.); +#100025 = VERTEX_POINT('',#100026); +#100026 = CARTESIAN_POINT('',(6.16,-4.15,1.5)); +#100027 = LINE('',#100028,#100029); +#100028 = CARTESIAN_POINT('',(6.16,-4.85,1.5)); +#100029 = VECTOR('',#100030,1.); +#100030 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100031 = ORIENTED_EDGE('',*,*,#100032,.T.); +#100032 = EDGE_CURVE('',#100025,#99046,#100033,.T.); +#100033 = LINE('',#100034,#100035); +#100034 = CARTESIAN_POINT('',(6.45,-4.15,1.5)); +#100035 = VECTOR('',#100036,1.); +#100036 = DIRECTION('',(-1.,-0.,0.)); +#100037 = ORIENTED_EDGE('',*,*,#99053,.F.); +#100038 = PLANE('',#100039); +#100039 = AXIS2_PLACEMENT_3D('',#100040,#100041,#100042); +#100040 = CARTESIAN_POINT('',(6.45,-4.85,1.5)); +#100041 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100042 = DIRECTION('',(-1.,0.,0.)); +#100043 = ADVANCED_FACE('',(#100044),#100181,.T.); +#100044 = FACE_BOUND('',#100045,.T.); +#100045 = EDGE_LOOP('',(#100046,#100056,#100065,#100073,#100082,#100090, + #100098,#100106,#100115,#100123,#100132,#100140,#100149,#100155, + #100156,#100157,#100166,#100174)); +#100046 = ORIENTED_EDGE('',*,*,#100047,.T.); +#100047 = EDGE_CURVE('',#100048,#100050,#100052,.T.); +#100048 = VERTEX_POINT('',#100049); +#100049 = CARTESIAN_POINT('',(6.462230377286,-4.15,-0.540767924286)); +#100050 = VERTEX_POINT('',#100051); +#100051 = CARTESIAN_POINT('',(6.725000733956,-4.15,-1.416669113186)); +#100052 = LINE('',#100053,#100054); +#100053 = CARTESIAN_POINT('',(6.45,-4.15,-0.5)); +#100054 = VECTOR('',#100055,1.); +#100055 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100056 = ORIENTED_EDGE('',*,*,#100057,.T.); +#100057 = EDGE_CURVE('',#100050,#100058,#100060,.T.); +#100058 = VERTEX_POINT('',#100059); +#100059 = CARTESIAN_POINT('',(6.725000733956,-4.15,-1.583330886814)); +#100060 = CIRCLE('',#100061,0.29); +#100061 = AXIS2_PLACEMENT_3D('',#100062,#100063,#100064); +#100062 = CARTESIAN_POINT('',(6.447231111242,-4.15,-1.5)); +#100063 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100064 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100065 = ORIENTED_EDGE('',*,*,#100066,.T.); +#100066 = EDGE_CURVE('',#100058,#100067,#100069,.T.); +#100067 = VERTEX_POINT('',#100068); +#100068 = CARTESIAN_POINT('',(6.462230377286,-4.15,-2.459232075714)); +#100069 = LINE('',#100070,#100071); +#100070 = CARTESIAN_POINT('',(6.75,-4.15,-1.5)); +#100071 = VECTOR('',#100072,1.); +#100072 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100073 = ORIENTED_EDGE('',*,*,#100074,.F.); +#100074 = EDGE_CURVE('',#100075,#100067,#100077,.T.); +#100075 = VERTEX_POINT('',#100076); +#100076 = CARTESIAN_POINT('',(6.45,-4.15,-2.542562962528)); +#100077 = CIRCLE('',#100078,0.29); +#100078 = AXIS2_PLACEMENT_3D('',#100079,#100080,#100081); +#100079 = CARTESIAN_POINT('',(6.74,-4.15,-2.542562962528)); +#100080 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100081 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100082 = ORIENTED_EDGE('',*,*,#100083,.F.); +#100083 = EDGE_CURVE('',#100084,#100075,#100086,.T.); +#100084 = VERTEX_POINT('',#100085); +#100085 = CARTESIAN_POINT('',(6.45,-4.15,-3.5)); +#100086 = LINE('',#100087,#100088); +#100087 = CARTESIAN_POINT('',(6.45,-4.15,-3.5)); +#100088 = VECTOR('',#100089,1.); +#100089 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100090 = ORIENTED_EDGE('',*,*,#100091,.F.); +#100091 = EDGE_CURVE('',#100092,#100084,#100094,.T.); +#100092 = VERTEX_POINT('',#100093); +#100093 = CARTESIAN_POINT('',(6.15,-4.15,-3.5)); +#100094 = LINE('',#100095,#100096); +#100095 = CARTESIAN_POINT('',(6.15,-4.15,-3.5)); +#100096 = VECTOR('',#100097,1.); +#100097 = DIRECTION('',(1.,0.,0.)); +#100098 = ORIENTED_EDGE('',*,*,#100099,.F.); +#100099 = EDGE_CURVE('',#100100,#100092,#100102,.T.); +#100100 = VERTEX_POINT('',#100101); +#100101 = CARTESIAN_POINT('',(6.15,-4.15,-2.542562962528)); +#100102 = LINE('',#100103,#100104); +#100103 = CARTESIAN_POINT('',(6.15,-4.15,-2.5)); +#100104 = VECTOR('',#100105,1.); +#100105 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100106 = ORIENTED_EDGE('',*,*,#100107,.F.); +#100107 = EDGE_CURVE('',#100108,#100100,#100110,.T.); +#100108 = VERTEX_POINT('',#100109); +#100109 = CARTESIAN_POINT('',(6.162230377286,-4.15,-2.459232075714)); +#100110 = CIRCLE('',#100111,0.29); +#100111 = AXIS2_PLACEMENT_3D('',#100112,#100113,#100114); +#100112 = CARTESIAN_POINT('',(6.44,-4.15,-2.542562962528)); +#100113 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100114 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100115 = ORIENTED_EDGE('',*,*,#100116,.T.); +#100116 = EDGE_CURVE('',#100108,#100117,#100119,.T.); +#100117 = VERTEX_POINT('',#100118); +#100118 = CARTESIAN_POINT('',(6.425000733956,-4.15,-1.583330886814)); +#100119 = LINE('',#100120,#100121); +#100120 = CARTESIAN_POINT('',(6.15,-4.15,-2.5)); +#100121 = VECTOR('',#100122,1.); +#100122 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100123 = ORIENTED_EDGE('',*,*,#100124,.F.); +#100124 = EDGE_CURVE('',#100125,#100117,#100127,.T.); +#100125 = VERTEX_POINT('',#100126); +#100126 = CARTESIAN_POINT('',(6.425000733956,-4.15,-1.416669113186)); +#100127 = CIRCLE('',#100128,0.29); +#100128 = AXIS2_PLACEMENT_3D('',#100129,#100130,#100131); +#100129 = CARTESIAN_POINT('',(6.147231111242,-4.15,-1.5)); +#100130 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100131 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100132 = ORIENTED_EDGE('',*,*,#100133,.T.); +#100133 = EDGE_CURVE('',#100125,#100134,#100136,.T.); +#100134 = VERTEX_POINT('',#100135); +#100135 = CARTESIAN_POINT('',(6.162230377286,-4.15,-0.540767924286)); +#100136 = LINE('',#100137,#100138); +#100137 = CARTESIAN_POINT('',(6.45,-4.15,-1.5)); +#100138 = VECTOR('',#100139,1.); +#100139 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100140 = ORIENTED_EDGE('',*,*,#100141,.F.); +#100141 = EDGE_CURVE('',#100142,#100134,#100144,.T.); +#100142 = VERTEX_POINT('',#100143); +#100143 = CARTESIAN_POINT('',(6.15,-4.15,-0.457437037472)); +#100144 = CIRCLE('',#100145,0.29); +#100145 = AXIS2_PLACEMENT_3D('',#100146,#100147,#100148); +#100146 = CARTESIAN_POINT('',(6.44,-4.15,-0.457437037472)); +#100147 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100148 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100149 = ORIENTED_EDGE('',*,*,#100150,.F.); +#100150 = EDGE_CURVE('',#99038,#100142,#100151,.T.); +#100151 = LINE('',#100152,#100153); +#100152 = CARTESIAN_POINT('',(6.15,-4.15,1.5)); +#100153 = VECTOR('',#100154,1.); +#100154 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100155 = ORIENTED_EDGE('',*,*,#99045,.F.); +#100156 = ORIENTED_EDGE('',*,*,#100032,.F.); +#100157 = ORIENTED_EDGE('',*,*,#100158,.F.); +#100158 = EDGE_CURVE('',#100159,#100025,#100161,.T.); +#100159 = VERTEX_POINT('',#100160); +#100160 = CARTESIAN_POINT('',(6.45,-4.15,1.21)); +#100161 = CIRCLE('',#100162,0.29); +#100162 = AXIS2_PLACEMENT_3D('',#100163,#100164,#100165); +#100163 = CARTESIAN_POINT('',(6.16,-4.15,1.21)); +#100164 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100165 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100166 = ORIENTED_EDGE('',*,*,#100167,.F.); +#100167 = EDGE_CURVE('',#100168,#100159,#100170,.T.); +#100168 = VERTEX_POINT('',#100169); +#100169 = CARTESIAN_POINT('',(6.45,-4.15,-0.457437037472)); +#100170 = LINE('',#100171,#100172); +#100171 = CARTESIAN_POINT('',(6.45,-4.15,-0.5)); +#100172 = VECTOR('',#100173,1.); +#100173 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100174 = ORIENTED_EDGE('',*,*,#100175,.F.); +#100175 = EDGE_CURVE('',#100048,#100168,#100176,.T.); +#100176 = CIRCLE('',#100177,0.29); +#100177 = AXIS2_PLACEMENT_3D('',#100178,#100179,#100180); +#100178 = CARTESIAN_POINT('',(6.74,-4.15,-0.457437037472)); +#100179 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100180 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100181 = PLANE('',#100182); +#100182 = AXIS2_PLACEMENT_3D('',#100183,#100184,#100185); +#100183 = CARTESIAN_POINT('',(6.45,-4.15,-0.5)); +#100184 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100185 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100186 = ADVANCED_FACE('',(#100187),#100331,.T.); +#100187 = FACE_BOUND('',#100188,.T.); +#100188 = EDGE_LOOP('',(#100189,#100199,#100208,#100216,#100225,#100233, + #100241,#100249,#100258,#100266,#100275,#100283,#100292,#100298, + #100299,#100307,#100316,#100324)); +#100189 = ORIENTED_EDGE('',*,*,#100190,.T.); +#100190 = EDGE_CURVE('',#100191,#100193,#100195,.T.); +#100191 = VERTEX_POINT('',#100192); +#100192 = CARTESIAN_POINT('',(6.462230377286,0.35,-0.540767924286)); +#100193 = VERTEX_POINT('',#100194); +#100194 = CARTESIAN_POINT('',(6.725000733956,0.35,-1.416669113186)); +#100195 = LINE('',#100196,#100197); +#100196 = CARTESIAN_POINT('',(6.45,0.35,-0.5)); +#100197 = VECTOR('',#100198,1.); +#100198 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100199 = ORIENTED_EDGE('',*,*,#100200,.T.); +#100200 = EDGE_CURVE('',#100193,#100201,#100203,.T.); +#100201 = VERTEX_POINT('',#100202); +#100202 = CARTESIAN_POINT('',(6.725000733956,0.35,-1.583330886814)); +#100203 = CIRCLE('',#100204,0.29); +#100204 = AXIS2_PLACEMENT_3D('',#100205,#100206,#100207); +#100205 = CARTESIAN_POINT('',(6.447231111242,0.35,-1.5)); +#100206 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100207 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100208 = ORIENTED_EDGE('',*,*,#100209,.T.); +#100209 = EDGE_CURVE('',#100201,#100210,#100212,.T.); +#100210 = VERTEX_POINT('',#100211); +#100211 = CARTESIAN_POINT('',(6.462230377286,0.35,-2.459232075714)); +#100212 = LINE('',#100213,#100214); +#100213 = CARTESIAN_POINT('',(6.75,0.35,-1.5)); +#100214 = VECTOR('',#100215,1.); +#100215 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100216 = ORIENTED_EDGE('',*,*,#100217,.F.); +#100217 = EDGE_CURVE('',#100218,#100210,#100220,.T.); +#100218 = VERTEX_POINT('',#100219); +#100219 = CARTESIAN_POINT('',(6.45,0.35,-2.542562962528)); +#100220 = CIRCLE('',#100221,0.29); +#100221 = AXIS2_PLACEMENT_3D('',#100222,#100223,#100224); +#100222 = CARTESIAN_POINT('',(6.74,0.35,-2.542562962528)); +#100223 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100224 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100225 = ORIENTED_EDGE('',*,*,#100226,.F.); +#100226 = EDGE_CURVE('',#100227,#100218,#100229,.T.); +#100227 = VERTEX_POINT('',#100228); +#100228 = CARTESIAN_POINT('',(6.45,0.35,-3.5)); +#100229 = LINE('',#100230,#100231); +#100230 = CARTESIAN_POINT('',(6.45,0.35,-3.5)); +#100231 = VECTOR('',#100232,1.); +#100232 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100233 = ORIENTED_EDGE('',*,*,#100234,.F.); +#100234 = EDGE_CURVE('',#100235,#100227,#100237,.T.); +#100235 = VERTEX_POINT('',#100236); +#100236 = CARTESIAN_POINT('',(6.15,0.35,-3.5)); +#100237 = LINE('',#100238,#100239); +#100238 = CARTESIAN_POINT('',(6.15,0.35,-3.5)); +#100239 = VECTOR('',#100240,1.); +#100240 = DIRECTION('',(1.,0.,0.)); +#100241 = ORIENTED_EDGE('',*,*,#100242,.F.); +#100242 = EDGE_CURVE('',#100243,#100235,#100245,.T.); +#100243 = VERTEX_POINT('',#100244); +#100244 = CARTESIAN_POINT('',(6.15,0.35,-2.542562962528)); +#100245 = LINE('',#100246,#100247); +#100246 = CARTESIAN_POINT('',(6.15,0.35,-2.5)); +#100247 = VECTOR('',#100248,1.); +#100248 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100249 = ORIENTED_EDGE('',*,*,#100250,.F.); +#100250 = EDGE_CURVE('',#100251,#100243,#100253,.T.); +#100251 = VERTEX_POINT('',#100252); +#100252 = CARTESIAN_POINT('',(6.162230377286,0.35,-2.459232075714)); +#100253 = CIRCLE('',#100254,0.29); +#100254 = AXIS2_PLACEMENT_3D('',#100255,#100256,#100257); +#100255 = CARTESIAN_POINT('',(6.44,0.35,-2.542562962528)); +#100256 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100257 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100258 = ORIENTED_EDGE('',*,*,#100259,.T.); +#100259 = EDGE_CURVE('',#100251,#100260,#100262,.T.); +#100260 = VERTEX_POINT('',#100261); +#100261 = CARTESIAN_POINT('',(6.425000733956,0.35,-1.583330886814)); +#100262 = LINE('',#100263,#100264); +#100263 = CARTESIAN_POINT('',(6.15,0.35,-2.5)); +#100264 = VECTOR('',#100265,1.); +#100265 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100266 = ORIENTED_EDGE('',*,*,#100267,.F.); +#100267 = EDGE_CURVE('',#100268,#100260,#100270,.T.); +#100268 = VERTEX_POINT('',#100269); +#100269 = CARTESIAN_POINT('',(6.425000733956,0.35,-1.416669113186)); +#100270 = CIRCLE('',#100271,0.29); +#100271 = AXIS2_PLACEMENT_3D('',#100272,#100273,#100274); +#100272 = CARTESIAN_POINT('',(6.147231111242,0.35,-1.5)); +#100273 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100274 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100275 = ORIENTED_EDGE('',*,*,#100276,.T.); +#100276 = EDGE_CURVE('',#100268,#100277,#100279,.T.); +#100277 = VERTEX_POINT('',#100278); +#100278 = CARTESIAN_POINT('',(6.162230377286,0.35,-0.540767924286)); +#100279 = LINE('',#100280,#100281); +#100280 = CARTESIAN_POINT('',(6.45,0.35,-1.5)); +#100281 = VECTOR('',#100282,1.); +#100282 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100283 = ORIENTED_EDGE('',*,*,#100284,.F.); +#100284 = EDGE_CURVE('',#100285,#100277,#100287,.T.); +#100285 = VERTEX_POINT('',#100286); +#100286 = CARTESIAN_POINT('',(6.15,0.35,-0.457437037472)); +#100287 = CIRCLE('',#100288,0.29); +#100288 = AXIS2_PLACEMENT_3D('',#100289,#100290,#100291); +#100289 = CARTESIAN_POINT('',(6.44,0.35,-0.457437037472)); +#100290 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100291 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100292 = ORIENTED_EDGE('',*,*,#100293,.F.); +#100293 = EDGE_CURVE('',#99006,#100285,#100294,.T.); +#100294 = LINE('',#100295,#100296); +#100295 = CARTESIAN_POINT('',(6.15,0.35,1.5)); +#100296 = VECTOR('',#100297,1.); +#100297 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100298 = ORIENTED_EDGE('',*,*,#99013,.F.); +#100299 = ORIENTED_EDGE('',*,*,#100300,.F.); +#100300 = EDGE_CURVE('',#100301,#99014,#100303,.T.); +#100301 = VERTEX_POINT('',#100302); +#100302 = CARTESIAN_POINT('',(6.16,0.35,1.5)); +#100303 = LINE('',#100304,#100305); +#100304 = CARTESIAN_POINT('',(6.45,0.35,1.5)); +#100305 = VECTOR('',#100306,1.); +#100306 = DIRECTION('',(-1.,-0.,0.)); +#100307 = ORIENTED_EDGE('',*,*,#100308,.F.); +#100308 = EDGE_CURVE('',#100309,#100301,#100311,.T.); +#100309 = VERTEX_POINT('',#100310); +#100310 = CARTESIAN_POINT('',(6.45,0.35,1.21)); +#100311 = CIRCLE('',#100312,0.29); +#100312 = AXIS2_PLACEMENT_3D('',#100313,#100314,#100315); +#100313 = CARTESIAN_POINT('',(6.16,0.35,1.21)); +#100314 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100315 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100316 = ORIENTED_EDGE('',*,*,#100317,.F.); +#100317 = EDGE_CURVE('',#100318,#100309,#100320,.T.); +#100318 = VERTEX_POINT('',#100319); +#100319 = CARTESIAN_POINT('',(6.45,0.35,-0.457437037472)); +#100320 = LINE('',#100321,#100322); +#100321 = CARTESIAN_POINT('',(6.45,0.35,-0.5)); +#100322 = VECTOR('',#100323,1.); +#100323 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100324 = ORIENTED_EDGE('',*,*,#100325,.F.); +#100325 = EDGE_CURVE('',#100191,#100318,#100326,.T.); +#100326 = CIRCLE('',#100327,0.29); +#100327 = AXIS2_PLACEMENT_3D('',#100328,#100329,#100330); +#100328 = CARTESIAN_POINT('',(6.74,0.35,-0.457437037472)); +#100329 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100330 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100331 = PLANE('',#100332); +#100332 = AXIS2_PLACEMENT_3D('',#100333,#100334,#100335); +#100333 = CARTESIAN_POINT('',(6.45,0.35,-0.5)); +#100334 = DIRECTION('',(1.64346021921E-31,1.,5.551115123126E-16)); +#100335 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100336 = ADVANCED_FACE('',(#100337),#100481,.F.); +#100337 = FACE_BOUND('',#100338,.F.); +#100338 = EDGE_LOOP('',(#100339,#100349,#100358,#100366,#100375,#100383, + #100391,#100399,#100408,#100416,#100425,#100433,#100442,#100448, + #100449,#100457,#100466,#100474)); +#100339 = ORIENTED_EDGE('',*,*,#100340,.T.); +#100340 = EDGE_CURVE('',#100341,#100343,#100345,.T.); +#100341 = VERTEX_POINT('',#100342); +#100342 = CARTESIAN_POINT('',(6.462230377286,-0.35,-0.540767924286)); +#100343 = VERTEX_POINT('',#100344); +#100344 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.416669113186)); +#100345 = LINE('',#100346,#100347); +#100346 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#100347 = VECTOR('',#100348,1.); +#100348 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100349 = ORIENTED_EDGE('',*,*,#100350,.T.); +#100350 = EDGE_CURVE('',#100343,#100351,#100353,.T.); +#100351 = VERTEX_POINT('',#100352); +#100352 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.583330886814)); +#100353 = CIRCLE('',#100354,0.29); +#100354 = AXIS2_PLACEMENT_3D('',#100355,#100356,#100357); +#100355 = CARTESIAN_POINT('',(6.447231111242,-0.35,-1.5)); +#100356 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100357 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100358 = ORIENTED_EDGE('',*,*,#100359,.T.); +#100359 = EDGE_CURVE('',#100351,#100360,#100362,.T.); +#100360 = VERTEX_POINT('',#100361); +#100361 = CARTESIAN_POINT('',(6.462230377286,-0.35,-2.459232075714)); +#100362 = LINE('',#100363,#100364); +#100363 = CARTESIAN_POINT('',(6.75,-0.35,-1.5)); +#100364 = VECTOR('',#100365,1.); +#100365 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100366 = ORIENTED_EDGE('',*,*,#100367,.F.); +#100367 = EDGE_CURVE('',#100368,#100360,#100370,.T.); +#100368 = VERTEX_POINT('',#100369); +#100369 = CARTESIAN_POINT('',(6.45,-0.35,-2.542562962528)); +#100370 = CIRCLE('',#100371,0.29); +#100371 = AXIS2_PLACEMENT_3D('',#100372,#100373,#100374); +#100372 = CARTESIAN_POINT('',(6.74,-0.35,-2.542562962528)); +#100373 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100374 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100375 = ORIENTED_EDGE('',*,*,#100376,.F.); +#100376 = EDGE_CURVE('',#100377,#100368,#100379,.T.); +#100377 = VERTEX_POINT('',#100378); +#100378 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#100379 = LINE('',#100380,#100381); +#100380 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#100381 = VECTOR('',#100382,1.); +#100382 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100383 = ORIENTED_EDGE('',*,*,#100384,.F.); +#100384 = EDGE_CURVE('',#100385,#100377,#100387,.T.); +#100385 = VERTEX_POINT('',#100386); +#100386 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#100387 = LINE('',#100388,#100389); +#100388 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#100389 = VECTOR('',#100390,1.); +#100390 = DIRECTION('',(1.,0.,0.)); +#100391 = ORIENTED_EDGE('',*,*,#100392,.F.); +#100392 = EDGE_CURVE('',#100393,#100385,#100395,.T.); +#100393 = VERTEX_POINT('',#100394); +#100394 = CARTESIAN_POINT('',(6.15,-0.35,-2.542562962528)); +#100395 = LINE('',#100396,#100397); +#100396 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#100397 = VECTOR('',#100398,1.); +#100398 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100399 = ORIENTED_EDGE('',*,*,#100400,.F.); +#100400 = EDGE_CURVE('',#100401,#100393,#100403,.T.); +#100401 = VERTEX_POINT('',#100402); +#100402 = CARTESIAN_POINT('',(6.162230377286,-0.35,-2.459232075714)); +#100403 = CIRCLE('',#100404,0.29); +#100404 = AXIS2_PLACEMENT_3D('',#100405,#100406,#100407); +#100405 = CARTESIAN_POINT('',(6.44,-0.35,-2.542562962528)); +#100406 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100407 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100408 = ORIENTED_EDGE('',*,*,#100409,.T.); +#100409 = EDGE_CURVE('',#100401,#100410,#100412,.T.); +#100410 = VERTEX_POINT('',#100411); +#100411 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.583330886814)); +#100412 = LINE('',#100413,#100414); +#100413 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#100414 = VECTOR('',#100415,1.); +#100415 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100416 = ORIENTED_EDGE('',*,*,#100417,.F.); +#100417 = EDGE_CURVE('',#100418,#100410,#100420,.T.); +#100418 = VERTEX_POINT('',#100419); +#100419 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.416669113186)); +#100420 = CIRCLE('',#100421,0.29); +#100421 = AXIS2_PLACEMENT_3D('',#100422,#100423,#100424); +#100422 = CARTESIAN_POINT('',(6.147231111242,-0.35,-1.5)); +#100423 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100424 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100425 = ORIENTED_EDGE('',*,*,#100426,.T.); +#100426 = EDGE_CURVE('',#100418,#100427,#100429,.T.); +#100427 = VERTEX_POINT('',#100428); +#100428 = CARTESIAN_POINT('',(6.162230377286,-0.35,-0.540767924286)); +#100429 = LINE('',#100430,#100431); +#100430 = CARTESIAN_POINT('',(6.45,-0.35,-1.5)); +#100431 = VECTOR('',#100432,1.); +#100432 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100433 = ORIENTED_EDGE('',*,*,#100434,.F.); +#100434 = EDGE_CURVE('',#100435,#100427,#100437,.T.); +#100435 = VERTEX_POINT('',#100436); +#100436 = CARTESIAN_POINT('',(6.15,-0.35,-0.457437037472)); +#100437 = CIRCLE('',#100438,0.29); +#100438 = AXIS2_PLACEMENT_3D('',#100439,#100440,#100441); +#100439 = CARTESIAN_POINT('',(6.44,-0.35,-0.457437037472)); +#100440 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100441 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100442 = ORIENTED_EDGE('',*,*,#100443,.F.); +#100443 = EDGE_CURVE('',#99030,#100435,#100444,.T.); +#100444 = LINE('',#100445,#100446); +#100445 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#100446 = VECTOR('',#100447,1.); +#100447 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100448 = ORIENTED_EDGE('',*,*,#99029,.F.); +#100449 = ORIENTED_EDGE('',*,*,#100450,.F.); +#100450 = EDGE_CURVE('',#100451,#99022,#100453,.T.); +#100451 = VERTEX_POINT('',#100452); +#100452 = CARTESIAN_POINT('',(6.16,-0.35,1.5)); +#100453 = LINE('',#100454,#100455); +#100454 = CARTESIAN_POINT('',(6.45,-0.35,1.5)); +#100455 = VECTOR('',#100456,1.); +#100456 = DIRECTION('',(-1.,-0.,0.)); +#100457 = ORIENTED_EDGE('',*,*,#100458,.F.); +#100458 = EDGE_CURVE('',#100459,#100451,#100461,.T.); +#100459 = VERTEX_POINT('',#100460); +#100460 = CARTESIAN_POINT('',(6.45,-0.35,1.21)); +#100461 = CIRCLE('',#100462,0.29); +#100462 = AXIS2_PLACEMENT_3D('',#100463,#100464,#100465); +#100463 = CARTESIAN_POINT('',(6.16,-0.35,1.21)); +#100464 = DIRECTION('',(0.,-1.,-3.330669073875E-16)); +#100465 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100466 = ORIENTED_EDGE('',*,*,#100467,.F.); +#100467 = EDGE_CURVE('',#100468,#100459,#100470,.T.); +#100468 = VERTEX_POINT('',#100469); +#100469 = CARTESIAN_POINT('',(6.45,-0.35,-0.457437037472)); +#100470 = LINE('',#100471,#100472); +#100471 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#100472 = VECTOR('',#100473,1.); +#100473 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100474 = ORIENTED_EDGE('',*,*,#100475,.F.); +#100475 = EDGE_CURVE('',#100341,#100468,#100476,.T.); +#100476 = CIRCLE('',#100477,0.29); +#100477 = AXIS2_PLACEMENT_3D('',#100478,#100479,#100480); +#100478 = CARTESIAN_POINT('',(6.74,-0.35,-0.457437037472)); +#100479 = DIRECTION('',(-0.,1.,3.330669073875E-16)); +#100480 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100481 = PLANE('',#100482); +#100482 = AXIS2_PLACEMENT_3D('',#100483,#100484,#100485); +#100483 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#100484 = DIRECTION('',(1.64346021921E-31,1.,5.551115123126E-16)); +#100485 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100486 = ADVANCED_FACE('',(#100487),#100498,.T.); +#100487 = FACE_BOUND('',#100488,.T.); +#100488 = EDGE_LOOP('',(#100489,#100490,#100496,#100497)); +#100489 = ORIENTED_EDGE('',*,*,#100450,.F.); +#100490 = ORIENTED_EDGE('',*,*,#100491,.T.); +#100491 = EDGE_CURVE('',#100451,#100301,#100492,.T.); +#100492 = LINE('',#100493,#100494); +#100493 = CARTESIAN_POINT('',(6.16,-0.35,1.5)); +#100494 = VECTOR('',#100495,1.); +#100495 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100496 = ORIENTED_EDGE('',*,*,#100300,.T.); +#100497 = ORIENTED_EDGE('',*,*,#99021,.F.); +#100498 = PLANE('',#100499); +#100499 = AXIS2_PLACEMENT_3D('',#100500,#100501,#100502); +#100500 = CARTESIAN_POINT('',(6.45,-0.35,1.5)); +#100501 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100502 = DIRECTION('',(-1.,0.,0.)); +#100503 = ADVANCED_FACE('',(#100504),#100507,.F.); +#100504 = FACE_BOUND('',#100505,.F.); +#100505 = EDGE_LOOP('',(#100506)); +#100506 = ORIENTED_EDGE('',*,*,#99161,.F.); +#100507 = PLANE('',#100508); +#100508 = AXIS2_PLACEMENT_3D('',#100509,#100510,#100511); +#100509 = CARTESIAN_POINT('',(4.9,-2.25,4.3)); +#100510 = DIRECTION('',(0.,0.,-1.)); +#100511 = DIRECTION('',(-1.,0.,0.)); +#100512 = ADVANCED_FACE('',(#100513),#100524,.F.); +#100513 = FACE_BOUND('',#100514,.F.); +#100514 = EDGE_LOOP('',(#100515,#100516,#100517,#100518)); +#100515 = ORIENTED_EDGE('',*,*,#99659,.F.); +#100516 = ORIENTED_EDGE('',*,*,#99198,.F.); +#100517 = ORIENTED_EDGE('',*,*,#99809,.T.); +#100518 = ORIENTED_EDGE('',*,*,#100519,.F.); +#100519 = EDGE_CURVE('',#99651,#99801,#100520,.T.); +#100520 = LINE('',#100521,#100522); +#100521 = CARTESIAN_POINT('',(0.15,-4.85,-0.457437037472)); +#100522 = VECTOR('',#100523,1.); +#100523 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100524 = PLANE('',#100525); +#100525 = AXIS2_PLACEMENT_3D('',#100526,#100527,#100528); +#100526 = CARTESIAN_POINT('',(0.15,-4.85,1.5)); +#100527 = DIRECTION('',(-1.,0.,-0.)); +#100528 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100529 = ADVANCED_FACE('',(#100530),#100541,.T.); +#100530 = FACE_BOUND('',#100531,.T.); +#100531 = EDGE_LOOP('',(#100532,#100533,#100534,#100535)); +#100532 = ORIENTED_EDGE('',*,*,#99976,.F.); +#100533 = ORIENTED_EDGE('',*,*,#99223,.T.); +#100534 = ORIENTED_EDGE('',*,*,#100150,.T.); +#100535 = ORIENTED_EDGE('',*,*,#100536,.F.); +#100536 = EDGE_CURVE('',#99968,#100142,#100537,.T.); +#100537 = LINE('',#100538,#100539); +#100538 = CARTESIAN_POINT('',(6.15,-4.85,-0.457437037472)); +#100539 = VECTOR('',#100540,1.); +#100540 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100541 = PLANE('',#100542); +#100542 = AXIS2_PLACEMENT_3D('',#100543,#100544,#100545); +#100543 = CARTESIAN_POINT('',(6.15,-4.85,1.5)); +#100544 = DIRECTION('',(-1.,0.,-0.)); +#100545 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100546 = ADVANCED_FACE('',(#100547),#100558,.F.); +#100547 = FACE_BOUND('',#100548,.F.); +#100548 = EDGE_LOOP('',(#100549,#100550,#100551,#100552)); +#100549 = ORIENTED_EDGE('',*,*,#99516,.F.); +#100550 = ORIENTED_EDGE('',*,*,#99205,.F.); +#100551 = ORIENTED_EDGE('',*,*,#99342,.T.); +#100552 = ORIENTED_EDGE('',*,*,#100553,.F.); +#100553 = EDGE_CURVE('',#99508,#99334,#100554,.T.); +#100554 = LINE('',#100555,#100556); +#100555 = CARTESIAN_POINT('',(0.15,-0.35,-0.457437037472)); +#100556 = VECTOR('',#100557,1.); +#100557 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100558 = PLANE('',#100559); +#100559 = AXIS2_PLACEMENT_3D('',#100560,#100561,#100562); +#100560 = CARTESIAN_POINT('',(0.15,-0.35,1.5)); +#100561 = DIRECTION('',(-1.,0.,-0.)); +#100562 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100563 = ADVANCED_FACE('',(#100564),#100575,.T.); +#100564 = FACE_BOUND('',#100565,.T.); +#100565 = EDGE_LOOP('',(#100566,#100567,#100568,#100569)); +#100566 = ORIENTED_EDGE('',*,*,#100443,.F.); +#100567 = ORIENTED_EDGE('',*,*,#99216,.T.); +#100568 = ORIENTED_EDGE('',*,*,#100293,.T.); +#100569 = ORIENTED_EDGE('',*,*,#100570,.F.); +#100570 = EDGE_CURVE('',#100435,#100285,#100571,.T.); +#100571 = LINE('',#100572,#100573); +#100572 = CARTESIAN_POINT('',(6.15,-0.35,-0.457437037472)); +#100573 = VECTOR('',#100574,1.); +#100574 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100575 = PLANE('',#100576); +#100576 = AXIS2_PLACEMENT_3D('',#100577,#100578,#100579); +#100577 = CARTESIAN_POINT('',(6.15,-0.35,1.5)); +#100578 = DIRECTION('',(-1.,0.,-0.)); +#100579 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100580 = ADVANCED_FACE('',(#100581),#100597,.T.); +#100581 = FACE_BOUND('',#100582,.T.); +#100582 = EDGE_LOOP('',(#100583,#100584,#100590,#100591)); +#100583 = ORIENTED_EDGE('',*,*,#99413,.F.); +#100584 = ORIENTED_EDGE('',*,*,#100585,.T.); +#100585 = EDGE_CURVE('',#99414,#99240,#100586,.T.); +#100586 = LINE('',#100587,#100588); +#100587 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-0.540767924286)); +#100588 = VECTOR('',#100589,1.); +#100589 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100590 = ORIENTED_EDGE('',*,*,#99239,.T.); +#100591 = ORIENTED_EDGE('',*,*,#100592,.F.); +#100592 = EDGE_CURVE('',#99416,#99242,#100593,.T.); +#100593 = LINE('',#100594,#100595); +#100594 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.416669113186)); +#100595 = VECTOR('',#100596,1.); +#100596 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100597 = PLANE('',#100598); +#100598 = AXIS2_PLACEMENT_3D('',#100599,#100600,#100601); +#100599 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#100600 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#100601 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100602 = ADVANCED_FACE('',(#100603),#100614,.F.); +#100603 = FACE_BOUND('',#100604,.F.); +#100604 = EDGE_LOOP('',(#100605,#100606,#100607,#100613)); +#100605 = ORIENTED_EDGE('',*,*,#100585,.T.); +#100606 = ORIENTED_EDGE('',*,*,#99374,.T.); +#100607 = ORIENTED_EDGE('',*,*,#100608,.F.); +#100608 = EDGE_CURVE('',#99534,#99367,#100609,.T.); +#100609 = LINE('',#100610,#100611); +#100610 = CARTESIAN_POINT('',(-0.15,-0.35,-0.457437037472)); +#100611 = VECTOR('',#100612,1.); +#100612 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100613 = ORIENTED_EDGE('',*,*,#99541,.F.); +#100614 = CYLINDRICAL_SURFACE('',#100615,0.29); +#100615 = AXIS2_PLACEMENT_3D('',#100616,#100617,#100618); +#100616 = CARTESIAN_POINT('',(-0.44,-0.35,-0.457437037472)); +#100617 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100618 = DIRECTION('',(0.957826285221,9.570607158983E-17, + -0.287347885566)); +#100619 = ADVANCED_FACE('',(#100620),#100631,.T.); +#100620 = FACE_BOUND('',#100621,.T.); +#100621 = EDGE_LOOP('',(#100622,#100623,#100624,#100630)); +#100622 = ORIENTED_EDGE('',*,*,#100592,.T.); +#100623 = ORIENTED_EDGE('',*,*,#99249,.T.); +#100624 = ORIENTED_EDGE('',*,*,#100625,.F.); +#100625 = EDGE_CURVE('',#99424,#99250,#100626,.T.); +#100626 = LINE('',#100627,#100628); +#100627 = CARTESIAN_POINT('',(-0.425000733956,-0.35,-1.583330886814)); +#100628 = VECTOR('',#100629,1.); +#100629 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100630 = ORIENTED_EDGE('',*,*,#99423,.F.); +#100631 = CYLINDRICAL_SURFACE('',#100632,0.29); +#100632 = AXIS2_PLACEMENT_3D('',#100633,#100634,#100635); +#100633 = CARTESIAN_POINT('',(-0.147231111242,-0.35,-1.5)); +#100634 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100635 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100636 = ADVANCED_FACE('',(#100637),#100648,.F.); +#100637 = FACE_BOUND('',#100638,.F.); +#100638 = EDGE_LOOP('',(#100639,#100640,#100641,#100642)); +#100639 = ORIENTED_EDGE('',*,*,#99533,.F.); +#100640 = ORIENTED_EDGE('',*,*,#100608,.T.); +#100641 = ORIENTED_EDGE('',*,*,#99366,.T.); +#100642 = ORIENTED_EDGE('',*,*,#100643,.F.); +#100643 = EDGE_CURVE('',#99525,#99358,#100644,.T.); +#100644 = LINE('',#100645,#100646); +#100645 = CARTESIAN_POINT('',(-0.15,-0.35,1.21)); +#100646 = VECTOR('',#100647,1.); +#100647 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100648 = PLANE('',#100649); +#100649 = AXIS2_PLACEMENT_3D('',#100650,#100651,#100652); +#100650 = CARTESIAN_POINT('',(-0.15,-0.35,-0.5)); +#100651 = DIRECTION('',(1.,0.,0.)); +#100652 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100653 = ADVANCED_FACE('',(#100654),#100665,.T.); +#100654 = FACE_BOUND('',#100655,.T.); +#100655 = EDGE_LOOP('',(#100656,#100657,#100658,#100659)); +#100656 = ORIENTED_EDGE('',*,*,#99432,.F.); +#100657 = ORIENTED_EDGE('',*,*,#100625,.T.); +#100658 = ORIENTED_EDGE('',*,*,#99258,.T.); +#100659 = ORIENTED_EDGE('',*,*,#100660,.F.); +#100660 = EDGE_CURVE('',#99433,#99259,#100661,.T.); +#100661 = LINE('',#100662,#100663); +#100662 = CARTESIAN_POINT('',(-0.162230377286,-0.35,-2.459232075714)); +#100663 = VECTOR('',#100664,1.); +#100664 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100665 = PLANE('',#100666); +#100666 = AXIS2_PLACEMENT_3D('',#100667,#100668,#100669); +#100667 = CARTESIAN_POINT('',(-0.45,-0.35,-1.5)); +#100668 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#100669 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100670 = ADVANCED_FACE('',(#100671),#100677,.T.); +#100671 = FACE_BOUND('',#100672,.T.); +#100672 = EDGE_LOOP('',(#100673,#100674,#100675,#100676)); +#100673 = ORIENTED_EDGE('',*,*,#99524,.T.); +#100674 = ORIENTED_EDGE('',*,*,#99397,.T.); +#100675 = ORIENTED_EDGE('',*,*,#99357,.F.); +#100676 = ORIENTED_EDGE('',*,*,#100643,.F.); +#100677 = CYLINDRICAL_SURFACE('',#100678,0.29); +#100678 = AXIS2_PLACEMENT_3D('',#100679,#100680,#100681); +#100679 = CARTESIAN_POINT('',(0.14,-0.35,1.21)); +#100680 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100681 = DIRECTION('',(-1.,0.,0.)); +#100682 = ADVANCED_FACE('',(#100683),#100694,.F.); +#100683 = FACE_BOUND('',#100684,.F.); +#100684 = EDGE_LOOP('',(#100685,#100691,#100692,#100693)); +#100685 = ORIENTED_EDGE('',*,*,#100686,.T.); +#100686 = EDGE_CURVE('',#99441,#99267,#100687,.T.); +#100687 = LINE('',#100688,#100689); +#100688 = CARTESIAN_POINT('',(-0.15,-0.35,-2.542562962528)); +#100689 = VECTOR('',#100690,1.); +#100690 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100691 = ORIENTED_EDGE('',*,*,#99266,.T.); +#100692 = ORIENTED_EDGE('',*,*,#100660,.F.); +#100693 = ORIENTED_EDGE('',*,*,#99440,.F.); +#100694 = CYLINDRICAL_SURFACE('',#100695,0.29); +#100695 = AXIS2_PLACEMENT_3D('',#100696,#100697,#100698); +#100696 = CARTESIAN_POINT('',(-0.44,-0.35,-2.542562962528)); +#100697 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100698 = DIRECTION('',(1.,0.,-0.)); +#100699 = ADVANCED_FACE('',(#100700),#100711,.F.); +#100700 = FACE_BOUND('',#100701,.F.); +#100701 = EDGE_LOOP('',(#100702,#100703,#100709,#100710)); +#100702 = ORIENTED_EDGE('',*,*,#99449,.F.); +#100703 = ORIENTED_EDGE('',*,*,#100704,.T.); +#100704 = EDGE_CURVE('',#99450,#99276,#100705,.T.); +#100705 = LINE('',#100706,#100707); +#100706 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#100707 = VECTOR('',#100708,1.); +#100708 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100709 = ORIENTED_EDGE('',*,*,#99275,.T.); +#100710 = ORIENTED_EDGE('',*,*,#100686,.F.); +#100711 = PLANE('',#100712); +#100712 = AXIS2_PLACEMENT_3D('',#100713,#100714,#100715); +#100713 = CARTESIAN_POINT('',(-0.15,-0.35,-3.5)); +#100714 = DIRECTION('',(1.,0.,0.)); +#100715 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100716 = ADVANCED_FACE('',(#100717),#100728,.F.); +#100717 = FACE_BOUND('',#100718,.F.); +#100718 = EDGE_LOOP('',(#100719,#100725,#100726,#100727)); +#100719 = ORIENTED_EDGE('',*,*,#100720,.T.); +#100720 = EDGE_CURVE('',#99458,#99284,#100721,.T.); +#100721 = LINE('',#100722,#100723); +#100722 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#100723 = VECTOR('',#100724,1.); +#100724 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100725 = ORIENTED_EDGE('',*,*,#99283,.T.); +#100726 = ORIENTED_EDGE('',*,*,#100704,.F.); +#100727 = ORIENTED_EDGE('',*,*,#99457,.F.); +#100728 = PLANE('',#100729); +#100729 = AXIS2_PLACEMENT_3D('',#100730,#100731,#100732); +#100730 = CARTESIAN_POINT('',(0.15,-0.35,-3.5)); +#100731 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100732 = DIRECTION('',(-1.,0.,0.)); +#100733 = ADVANCED_FACE('',(#100734),#100745,.F.); +#100734 = FACE_BOUND('',#100735,.F.); +#100735 = EDGE_LOOP('',(#100736,#100737,#100743,#100744)); +#100736 = ORIENTED_EDGE('',*,*,#99465,.F.); +#100737 = ORIENTED_EDGE('',*,*,#100738,.T.); +#100738 = EDGE_CURVE('',#99466,#99292,#100739,.T.); +#100739 = LINE('',#100740,#100741); +#100740 = CARTESIAN_POINT('',(0.15,-0.35,-2.542562962528)); +#100741 = VECTOR('',#100742,1.); +#100742 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100743 = ORIENTED_EDGE('',*,*,#99291,.T.); +#100744 = ORIENTED_EDGE('',*,*,#100720,.F.); +#100745 = PLANE('',#100746); +#100746 = AXIS2_PLACEMENT_3D('',#100747,#100748,#100749); +#100747 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#100748 = DIRECTION('',(-1.,0.,-0.)); +#100749 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#100750 = ADVANCED_FACE('',(#100751),#100762,.T.); +#100751 = FACE_BOUND('',#100752,.T.); +#100752 = EDGE_LOOP('',(#100753,#100754,#100760,#100761)); +#100753 = ORIENTED_EDGE('',*,*,#99507,.T.); +#100754 = ORIENTED_EDGE('',*,*,#100755,.T.); +#100755 = EDGE_CURVE('',#99500,#99326,#100756,.T.); +#100756 = LINE('',#100757,#100758); +#100757 = CARTESIAN_POINT('',(0.137769622714,-0.35,-0.540767924286)); +#100758 = VECTOR('',#100759,1.); +#100759 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100760 = ORIENTED_EDGE('',*,*,#99333,.F.); +#100761 = ORIENTED_EDGE('',*,*,#100553,.F.); +#100762 = CYLINDRICAL_SURFACE('',#100763,0.29); +#100763 = AXIS2_PLACEMENT_3D('',#100764,#100765,#100766); +#100764 = CARTESIAN_POINT('',(-0.14,-0.35,-0.457437037472)); +#100765 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100766 = DIRECTION('',(1.,0.,-0.)); +#100767 = ADVANCED_FACE('',(#100768),#100779,.T.); +#100768 = FACE_BOUND('',#100769,.T.); +#100769 = EDGE_LOOP('',(#100770,#100771,#100772,#100773)); +#100770 = ORIENTED_EDGE('',*,*,#99473,.T.); +#100771 = ORIENTED_EDGE('',*,*,#100738,.T.); +#100772 = ORIENTED_EDGE('',*,*,#99299,.F.); +#100773 = ORIENTED_EDGE('',*,*,#100774,.F.); +#100774 = EDGE_CURVE('',#99474,#99300,#100775,.T.); +#100775 = LINE('',#100776,#100777); +#100776 = CARTESIAN_POINT('',(0.137769622714,-0.35,-2.459232075714)); +#100777 = VECTOR('',#100778,1.); +#100778 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100779 = CYLINDRICAL_SURFACE('',#100780,0.29); +#100780 = AXIS2_PLACEMENT_3D('',#100781,#100782,#100783); +#100781 = CARTESIAN_POINT('',(-0.14,-0.35,-2.542562962528)); +#100782 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100783 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100784 = ADVANCED_FACE('',(#100785),#100796,.T.); +#100785 = FACE_BOUND('',#100786,.T.); +#100786 = EDGE_LOOP('',(#100787,#100788,#100794,#100795)); +#100787 = ORIENTED_EDGE('',*,*,#99499,.F.); +#100788 = ORIENTED_EDGE('',*,*,#100789,.T.); +#100789 = EDGE_CURVE('',#99491,#99317,#100790,.T.); +#100790 = LINE('',#100791,#100792); +#100791 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.416669113186)); +#100792 = VECTOR('',#100793,1.); +#100793 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100794 = ORIENTED_EDGE('',*,*,#99325,.T.); +#100795 = ORIENTED_EDGE('',*,*,#100755,.F.); +#100796 = PLANE('',#100797); +#100797 = AXIS2_PLACEMENT_3D('',#100798,#100799,#100800); +#100798 = CARTESIAN_POINT('',(-0.15,-0.35,-1.5)); +#100799 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#100800 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#100801 = ADVANCED_FACE('',(#100802),#100813,.T.); +#100802 = FACE_BOUND('',#100803,.T.); +#100803 = EDGE_LOOP('',(#100804,#100805,#100806,#100807)); +#100804 = ORIENTED_EDGE('',*,*,#99482,.F.); +#100805 = ORIENTED_EDGE('',*,*,#100774,.T.); +#100806 = ORIENTED_EDGE('',*,*,#99308,.T.); +#100807 = ORIENTED_EDGE('',*,*,#100808,.F.); +#100808 = EDGE_CURVE('',#99483,#99309,#100809,.T.); +#100809 = LINE('',#100810,#100811); +#100810 = CARTESIAN_POINT('',(-0.125000733956,-0.35,-1.583330886814)); +#100811 = VECTOR('',#100812,1.); +#100812 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100813 = PLANE('',#100814); +#100814 = AXIS2_PLACEMENT_3D('',#100815,#100816,#100817); +#100815 = CARTESIAN_POINT('',(0.15,-0.35,-2.5)); +#100816 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#100817 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#100818 = ADVANCED_FACE('',(#100819),#100825,.F.); +#100819 = FACE_BOUND('',#100820,.F.); +#100820 = EDGE_LOOP('',(#100821,#100822,#100823,#100824)); +#100821 = ORIENTED_EDGE('',*,*,#100789,.T.); +#100822 = ORIENTED_EDGE('',*,*,#99316,.T.); +#100823 = ORIENTED_EDGE('',*,*,#100808,.F.); +#100824 = ORIENTED_EDGE('',*,*,#99490,.F.); +#100825 = CYLINDRICAL_SURFACE('',#100826,0.29); +#100826 = AXIS2_PLACEMENT_3D('',#100827,#100828,#100829); +#100827 = CARTESIAN_POINT('',(0.152768888758,-0.35,-1.5)); +#100828 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100829 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100830 = ADVANCED_FACE('',(#100831),#100847,.T.); +#100831 = FACE_BOUND('',#100832,.T.); +#100832 = EDGE_LOOP('',(#100833,#100834,#100840,#100841)); +#100833 = ORIENTED_EDGE('',*,*,#99556,.F.); +#100834 = ORIENTED_EDGE('',*,*,#100835,.T.); +#100835 = EDGE_CURVE('',#99557,#99707,#100836,.T.); +#100836 = LINE('',#100837,#100838); +#100837 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-0.540767924286)); +#100838 = VECTOR('',#100839,1.); +#100839 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100840 = ORIENTED_EDGE('',*,*,#99706,.T.); +#100841 = ORIENTED_EDGE('',*,*,#100842,.F.); +#100842 = EDGE_CURVE('',#99559,#99709,#100843,.T.); +#100843 = LINE('',#100844,#100845); +#100844 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.416669113186)); +#100845 = VECTOR('',#100846,1.); +#100846 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100847 = PLANE('',#100848); +#100848 = AXIS2_PLACEMENT_3D('',#100849,#100850,#100851); +#100849 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#100850 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#100851 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#100852 = ADVANCED_FACE('',(#100853),#100864,.F.); +#100853 = FACE_BOUND('',#100854,.F.); +#100854 = EDGE_LOOP('',(#100855,#100856,#100857,#100863)); +#100855 = ORIENTED_EDGE('',*,*,#100835,.T.); +#100856 = ORIENTED_EDGE('',*,*,#99841,.T.); +#100857 = ORIENTED_EDGE('',*,*,#100858,.F.); +#100858 = EDGE_CURVE('',#99684,#99834,#100859,.T.); +#100859 = LINE('',#100860,#100861); +#100860 = CARTESIAN_POINT('',(-0.15,-4.85,-0.457437037472)); +#100861 = VECTOR('',#100862,1.); +#100862 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100863 = ORIENTED_EDGE('',*,*,#99691,.F.); +#100864 = CYLINDRICAL_SURFACE('',#100865,0.29); +#100865 = AXIS2_PLACEMENT_3D('',#100866,#100867,#100868); +#100866 = CARTESIAN_POINT('',(-0.44,-4.85,-0.457437037472)); +#100867 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100868 = DIRECTION('',(0.957826285221,9.570607158983E-17, + -0.287347885566)); +#100869 = ADVANCED_FACE('',(#100870),#100881,.T.); +#100870 = FACE_BOUND('',#100871,.T.); +#100871 = EDGE_LOOP('',(#100872,#100873,#100874,#100880)); +#100872 = ORIENTED_EDGE('',*,*,#100842,.T.); +#100873 = ORIENTED_EDGE('',*,*,#99716,.T.); +#100874 = ORIENTED_EDGE('',*,*,#100875,.F.); +#100875 = EDGE_CURVE('',#99567,#99717,#100876,.T.); +#100876 = LINE('',#100877,#100878); +#100877 = CARTESIAN_POINT('',(-0.425000733956,-4.85,-1.583330886814)); +#100878 = VECTOR('',#100879,1.); +#100879 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100880 = ORIENTED_EDGE('',*,*,#99566,.F.); +#100881 = CYLINDRICAL_SURFACE('',#100882,0.29); +#100882 = AXIS2_PLACEMENT_3D('',#100883,#100884,#100885); +#100883 = CARTESIAN_POINT('',(-0.147231111242,-4.85,-1.5)); +#100884 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100885 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#100886 = ADVANCED_FACE('',(#100887),#100898,.F.); +#100887 = FACE_BOUND('',#100888,.F.); +#100888 = EDGE_LOOP('',(#100889,#100890,#100891,#100892)); +#100889 = ORIENTED_EDGE('',*,*,#99683,.F.); +#100890 = ORIENTED_EDGE('',*,*,#100858,.T.); +#100891 = ORIENTED_EDGE('',*,*,#99833,.T.); +#100892 = ORIENTED_EDGE('',*,*,#100893,.F.); +#100893 = EDGE_CURVE('',#99675,#99825,#100894,.T.); +#100894 = LINE('',#100895,#100896); +#100895 = CARTESIAN_POINT('',(-0.15,-4.85,1.21)); +#100896 = VECTOR('',#100897,1.); +#100897 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100898 = PLANE('',#100899); +#100899 = AXIS2_PLACEMENT_3D('',#100900,#100901,#100902); +#100900 = CARTESIAN_POINT('',(-0.15,-4.85,-0.5)); +#100901 = DIRECTION('',(1.,0.,0.)); +#100902 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100903 = ADVANCED_FACE('',(#100904),#100915,.T.); +#100904 = FACE_BOUND('',#100905,.T.); +#100905 = EDGE_LOOP('',(#100906,#100907,#100908,#100909)); +#100906 = ORIENTED_EDGE('',*,*,#99575,.F.); +#100907 = ORIENTED_EDGE('',*,*,#100875,.T.); +#100908 = ORIENTED_EDGE('',*,*,#99725,.T.); +#100909 = ORIENTED_EDGE('',*,*,#100910,.F.); +#100910 = EDGE_CURVE('',#99576,#99726,#100911,.T.); +#100911 = LINE('',#100912,#100913); +#100912 = CARTESIAN_POINT('',(-0.162230377286,-4.85,-2.459232075714)); +#100913 = VECTOR('',#100914,1.); +#100914 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100915 = PLANE('',#100916); +#100916 = AXIS2_PLACEMENT_3D('',#100917,#100918,#100919); +#100917 = CARTESIAN_POINT('',(-0.45,-4.85,-1.5)); +#100918 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#100919 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#100920 = ADVANCED_FACE('',(#100921),#100927,.T.); +#100921 = FACE_BOUND('',#100922,.T.); +#100922 = EDGE_LOOP('',(#100923,#100924,#100925,#100926)); +#100923 = ORIENTED_EDGE('',*,*,#99674,.T.); +#100924 = ORIENTED_EDGE('',*,*,#99857,.T.); +#100925 = ORIENTED_EDGE('',*,*,#99824,.F.); +#100926 = ORIENTED_EDGE('',*,*,#100893,.F.); +#100927 = CYLINDRICAL_SURFACE('',#100928,0.29); +#100928 = AXIS2_PLACEMENT_3D('',#100929,#100930,#100931); +#100929 = CARTESIAN_POINT('',(0.14,-4.85,1.21)); +#100930 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100931 = DIRECTION('',(-1.,0.,0.)); +#100932 = ADVANCED_FACE('',(#100933),#100944,.F.); +#100933 = FACE_BOUND('',#100934,.F.); +#100934 = EDGE_LOOP('',(#100935,#100941,#100942,#100943)); +#100935 = ORIENTED_EDGE('',*,*,#100936,.T.); +#100936 = EDGE_CURVE('',#99584,#99734,#100937,.T.); +#100937 = LINE('',#100938,#100939); +#100938 = CARTESIAN_POINT('',(-0.15,-4.85,-2.542562962528)); +#100939 = VECTOR('',#100940,1.); +#100940 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100941 = ORIENTED_EDGE('',*,*,#99733,.T.); +#100942 = ORIENTED_EDGE('',*,*,#100910,.F.); +#100943 = ORIENTED_EDGE('',*,*,#99583,.F.); +#100944 = CYLINDRICAL_SURFACE('',#100945,0.29); +#100945 = AXIS2_PLACEMENT_3D('',#100946,#100947,#100948); +#100946 = CARTESIAN_POINT('',(-0.44,-4.85,-2.542562962528)); +#100947 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100948 = DIRECTION('',(1.,0.,-0.)); +#100949 = ADVANCED_FACE('',(#100950),#100961,.F.); +#100950 = FACE_BOUND('',#100951,.F.); +#100951 = EDGE_LOOP('',(#100952,#100953,#100959,#100960)); +#100952 = ORIENTED_EDGE('',*,*,#99592,.F.); +#100953 = ORIENTED_EDGE('',*,*,#100954,.T.); +#100954 = EDGE_CURVE('',#99593,#99743,#100955,.T.); +#100955 = LINE('',#100956,#100957); +#100956 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#100957 = VECTOR('',#100958,1.); +#100958 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100959 = ORIENTED_EDGE('',*,*,#99742,.T.); +#100960 = ORIENTED_EDGE('',*,*,#100936,.F.); +#100961 = PLANE('',#100962); +#100962 = AXIS2_PLACEMENT_3D('',#100963,#100964,#100965); +#100963 = CARTESIAN_POINT('',(-0.15,-4.85,-3.5)); +#100964 = DIRECTION('',(1.,0.,0.)); +#100965 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#100966 = ADVANCED_FACE('',(#100967),#100978,.F.); +#100967 = FACE_BOUND('',#100968,.F.); +#100968 = EDGE_LOOP('',(#100969,#100975,#100976,#100977)); +#100969 = ORIENTED_EDGE('',*,*,#100970,.T.); +#100970 = EDGE_CURVE('',#99601,#99751,#100971,.T.); +#100971 = LINE('',#100972,#100973); +#100972 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#100973 = VECTOR('',#100974,1.); +#100974 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100975 = ORIENTED_EDGE('',*,*,#99750,.T.); +#100976 = ORIENTED_EDGE('',*,*,#100954,.F.); +#100977 = ORIENTED_EDGE('',*,*,#99600,.F.); +#100978 = PLANE('',#100979); +#100979 = AXIS2_PLACEMENT_3D('',#100980,#100981,#100982); +#100980 = CARTESIAN_POINT('',(0.15,-4.85,-3.5)); +#100981 = DIRECTION('',(0.,-3.330669073875E-16,1.)); +#100982 = DIRECTION('',(-1.,0.,0.)); +#100983 = ADVANCED_FACE('',(#100984),#100995,.F.); +#100984 = FACE_BOUND('',#100985,.F.); +#100985 = EDGE_LOOP('',(#100986,#100987,#100993,#100994)); +#100986 = ORIENTED_EDGE('',*,*,#99608,.F.); +#100987 = ORIENTED_EDGE('',*,*,#100988,.T.); +#100988 = EDGE_CURVE('',#99609,#99759,#100989,.T.); +#100989 = LINE('',#100990,#100991); +#100990 = CARTESIAN_POINT('',(0.15,-4.85,-2.542562962528)); +#100991 = VECTOR('',#100992,1.); +#100992 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#100993 = ORIENTED_EDGE('',*,*,#99758,.T.); +#100994 = ORIENTED_EDGE('',*,*,#100970,.F.); +#100995 = PLANE('',#100996); +#100996 = AXIS2_PLACEMENT_3D('',#100997,#100998,#100999); +#100997 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#100998 = DIRECTION('',(-1.,0.,-0.)); +#100999 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#101000 = ADVANCED_FACE('',(#101001),#101012,.T.); +#101001 = FACE_BOUND('',#101002,.T.); +#101002 = EDGE_LOOP('',(#101003,#101004,#101010,#101011)); +#101003 = ORIENTED_EDGE('',*,*,#99650,.T.); +#101004 = ORIENTED_EDGE('',*,*,#101005,.T.); +#101005 = EDGE_CURVE('',#99643,#99793,#101006,.T.); +#101006 = LINE('',#101007,#101008); +#101007 = CARTESIAN_POINT('',(0.137769622714,-4.85,-0.540767924286)); +#101008 = VECTOR('',#101009,1.); +#101009 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101010 = ORIENTED_EDGE('',*,*,#99800,.F.); +#101011 = ORIENTED_EDGE('',*,*,#100519,.F.); +#101012 = CYLINDRICAL_SURFACE('',#101013,0.29); +#101013 = AXIS2_PLACEMENT_3D('',#101014,#101015,#101016); +#101014 = CARTESIAN_POINT('',(-0.14,-4.85,-0.457437037472)); +#101015 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101016 = DIRECTION('',(1.,0.,-0.)); +#101017 = ADVANCED_FACE('',(#101018),#101029,.T.); +#101018 = FACE_BOUND('',#101019,.T.); +#101019 = EDGE_LOOP('',(#101020,#101021,#101022,#101023)); +#101020 = ORIENTED_EDGE('',*,*,#99616,.T.); +#101021 = ORIENTED_EDGE('',*,*,#100988,.T.); +#101022 = ORIENTED_EDGE('',*,*,#99766,.F.); +#101023 = ORIENTED_EDGE('',*,*,#101024,.F.); +#101024 = EDGE_CURVE('',#99617,#99767,#101025,.T.); +#101025 = LINE('',#101026,#101027); +#101026 = CARTESIAN_POINT('',(0.137769622714,-4.85,-2.459232075714)); +#101027 = VECTOR('',#101028,1.); +#101028 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101029 = CYLINDRICAL_SURFACE('',#101030,0.29); +#101030 = AXIS2_PLACEMENT_3D('',#101031,#101032,#101033); +#101031 = CARTESIAN_POINT('',(-0.14,-4.85,-2.542562962528)); +#101032 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101033 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101034 = ADVANCED_FACE('',(#101035),#101046,.T.); +#101035 = FACE_BOUND('',#101036,.T.); +#101036 = EDGE_LOOP('',(#101037,#101038,#101044,#101045)); +#101037 = ORIENTED_EDGE('',*,*,#99642,.F.); +#101038 = ORIENTED_EDGE('',*,*,#101039,.T.); +#101039 = EDGE_CURVE('',#99634,#99784,#101040,.T.); +#101040 = LINE('',#101041,#101042); +#101041 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.416669113186)); +#101042 = VECTOR('',#101043,1.); +#101043 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101044 = ORIENTED_EDGE('',*,*,#99792,.T.); +#101045 = ORIENTED_EDGE('',*,*,#101005,.F.); +#101046 = PLANE('',#101047); +#101047 = AXIS2_PLACEMENT_3D('',#101048,#101049,#101050); +#101048 = CARTESIAN_POINT('',(-0.15,-4.85,-1.5)); +#101049 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101050 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#101051 = ADVANCED_FACE('',(#101052),#101063,.T.); +#101052 = FACE_BOUND('',#101053,.T.); +#101053 = EDGE_LOOP('',(#101054,#101055,#101056,#101057)); +#101054 = ORIENTED_EDGE('',*,*,#99625,.F.); +#101055 = ORIENTED_EDGE('',*,*,#101024,.T.); +#101056 = ORIENTED_EDGE('',*,*,#99775,.T.); +#101057 = ORIENTED_EDGE('',*,*,#101058,.F.); +#101058 = EDGE_CURVE('',#99626,#99776,#101059,.T.); +#101059 = LINE('',#101060,#101061); +#101060 = CARTESIAN_POINT('',(-0.125000733956,-4.85,-1.583330886814)); +#101061 = VECTOR('',#101062,1.); +#101062 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101063 = PLANE('',#101064); +#101064 = AXIS2_PLACEMENT_3D('',#101065,#101066,#101067); +#101065 = CARTESIAN_POINT('',(0.15,-4.85,-2.5)); +#101066 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101067 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#101068 = ADVANCED_FACE('',(#101069),#101075,.F.); +#101069 = FACE_BOUND('',#101070,.F.); +#101070 = EDGE_LOOP('',(#101071,#101072,#101073,#101074)); +#101071 = ORIENTED_EDGE('',*,*,#101039,.T.); +#101072 = ORIENTED_EDGE('',*,*,#99783,.T.); +#101073 = ORIENTED_EDGE('',*,*,#101058,.F.); +#101074 = ORIENTED_EDGE('',*,*,#99633,.F.); +#101075 = CYLINDRICAL_SURFACE('',#101076,0.29); +#101076 = AXIS2_PLACEMENT_3D('',#101077,#101078,#101079); +#101077 = CARTESIAN_POINT('',(0.152768888758,-4.85,-1.5)); +#101078 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101079 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101080 = ADVANCED_FACE('',(#101081),#101097,.F.); +#101081 = FACE_BOUND('',#101082,.F.); +#101082 = EDGE_LOOP('',(#101083,#101084,#101090,#101091)); +#101083 = ORIENTED_EDGE('',*,*,#99873,.F.); +#101084 = ORIENTED_EDGE('',*,*,#101085,.T.); +#101085 = EDGE_CURVE('',#99874,#100048,#101086,.T.); +#101086 = LINE('',#101087,#101088); +#101087 = CARTESIAN_POINT('',(6.462230377286,-4.85,-0.540767924286)); +#101088 = VECTOR('',#101089,1.); +#101089 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101090 = ORIENTED_EDGE('',*,*,#100047,.T.); +#101091 = ORIENTED_EDGE('',*,*,#101092,.F.); +#101092 = EDGE_CURVE('',#99876,#100050,#101093,.T.); +#101093 = LINE('',#101094,#101095); +#101094 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.416669113186)); +#101095 = VECTOR('',#101096,1.); +#101096 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101097 = PLANE('',#101098); +#101098 = AXIS2_PLACEMENT_3D('',#101099,#101100,#101101); +#101099 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#101100 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101101 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#101102 = ADVANCED_FACE('',(#101103),#101114,.F.); +#101103 = FACE_BOUND('',#101104,.F.); +#101104 = EDGE_LOOP('',(#101105,#101106,#101112,#101113)); +#101105 = ORIENTED_EDGE('',*,*,#100008,.T.); +#101106 = ORIENTED_EDGE('',*,*,#101107,.T.); +#101107 = EDGE_CURVE('',#100001,#100168,#101108,.T.); +#101108 = LINE('',#101109,#101110); +#101109 = CARTESIAN_POINT('',(6.45,-4.85,-0.457437037472)); +#101110 = VECTOR('',#101111,1.); +#101111 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101112 = ORIENTED_EDGE('',*,*,#100175,.F.); +#101113 = ORIENTED_EDGE('',*,*,#101085,.F.); +#101114 = CYLINDRICAL_SURFACE('',#101115,0.29); +#101115 = AXIS2_PLACEMENT_3D('',#101116,#101117,#101118); +#101116 = CARTESIAN_POINT('',(6.74,-4.85,-0.457437037472)); +#101117 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101118 = DIRECTION('',(-0.957826285221,9.570607158983E-17, + -0.287347885566)); +#101119 = ADVANCED_FACE('',(#101120),#101131,.T.); +#101120 = FACE_BOUND('',#101121,.T.); +#101121 = EDGE_LOOP('',(#101122,#101123,#101129,#101130)); +#101122 = ORIENTED_EDGE('',*,*,#99883,.T.); +#101123 = ORIENTED_EDGE('',*,*,#101124,.T.); +#101124 = EDGE_CURVE('',#99884,#100058,#101125,.T.); +#101125 = LINE('',#101126,#101127); +#101126 = CARTESIAN_POINT('',(6.725000733956,-4.85,-1.583330886814)); +#101127 = VECTOR('',#101128,1.); +#101128 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101129 = ORIENTED_EDGE('',*,*,#100057,.F.); +#101130 = ORIENTED_EDGE('',*,*,#101092,.F.); +#101131 = CYLINDRICAL_SURFACE('',#101132,0.29); +#101132 = AXIS2_PLACEMENT_3D('',#101133,#101134,#101135); +#101133 = CARTESIAN_POINT('',(6.447231111242,-4.85,-1.5)); +#101134 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101135 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101136 = ADVANCED_FACE('',(#101137),#101148,.T.); +#101137 = FACE_BOUND('',#101138,.T.); +#101138 = EDGE_LOOP('',(#101139,#101140,#101141,#101142)); +#101139 = ORIENTED_EDGE('',*,*,#100000,.F.); +#101140 = ORIENTED_EDGE('',*,*,#101107,.T.); +#101141 = ORIENTED_EDGE('',*,*,#100167,.T.); +#101142 = ORIENTED_EDGE('',*,*,#101143,.F.); +#101143 = EDGE_CURVE('',#99992,#100159,#101144,.T.); +#101144 = LINE('',#101145,#101146); +#101145 = CARTESIAN_POINT('',(6.45,-4.85,1.21)); +#101146 = VECTOR('',#101147,1.); +#101147 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101148 = PLANE('',#101149); +#101149 = AXIS2_PLACEMENT_3D('',#101150,#101151,#101152); +#101150 = CARTESIAN_POINT('',(6.45,-4.85,-0.5)); +#101151 = DIRECTION('',(1.,0.,0.)); +#101152 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101153 = ADVANCED_FACE('',(#101154),#101165,.F.); +#101154 = FACE_BOUND('',#101155,.F.); +#101155 = EDGE_LOOP('',(#101156,#101157,#101158,#101159)); +#101156 = ORIENTED_EDGE('',*,*,#99892,.F.); +#101157 = ORIENTED_EDGE('',*,*,#101124,.T.); +#101158 = ORIENTED_EDGE('',*,*,#100066,.T.); +#101159 = ORIENTED_EDGE('',*,*,#101160,.F.); +#101160 = EDGE_CURVE('',#99893,#100067,#101161,.T.); +#101161 = LINE('',#101162,#101163); +#101162 = CARTESIAN_POINT('',(6.462230377286,-4.85,-2.459232075714)); +#101163 = VECTOR('',#101164,1.); +#101164 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101165 = PLANE('',#101166); +#101166 = AXIS2_PLACEMENT_3D('',#101167,#101168,#101169); +#101167 = CARTESIAN_POINT('',(6.75,-4.85,-1.5)); +#101168 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101169 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#101170 = ADVANCED_FACE('',(#101171),#101177,.T.); +#101171 = FACE_BOUND('',#101172,.T.); +#101172 = EDGE_LOOP('',(#101173,#101174,#101175,#101176)); +#101173 = ORIENTED_EDGE('',*,*,#101143,.T.); +#101174 = ORIENTED_EDGE('',*,*,#100158,.T.); +#101175 = ORIENTED_EDGE('',*,*,#100024,.F.); +#101176 = ORIENTED_EDGE('',*,*,#99991,.F.); +#101177 = CYLINDRICAL_SURFACE('',#101178,0.29); +#101178 = AXIS2_PLACEMENT_3D('',#101179,#101180,#101181); +#101179 = CARTESIAN_POINT('',(6.16,-4.85,1.21)); +#101180 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101181 = DIRECTION('',(1.,0.,-0.)); +#101182 = ADVANCED_FACE('',(#101183),#101194,.F.); +#101183 = FACE_BOUND('',#101184,.F.); +#101184 = EDGE_LOOP('',(#101185,#101186,#101187,#101188)); +#101185 = ORIENTED_EDGE('',*,*,#99900,.T.); +#101186 = ORIENTED_EDGE('',*,*,#101160,.T.); +#101187 = ORIENTED_EDGE('',*,*,#100074,.F.); +#101188 = ORIENTED_EDGE('',*,*,#101189,.F.); +#101189 = EDGE_CURVE('',#99901,#100075,#101190,.T.); +#101190 = LINE('',#101191,#101192); +#101191 = CARTESIAN_POINT('',(6.45,-4.85,-2.542562962528)); +#101192 = VECTOR('',#101193,1.); +#101193 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101194 = CYLINDRICAL_SURFACE('',#101195,0.29); +#101195 = AXIS2_PLACEMENT_3D('',#101196,#101197,#101198); +#101196 = CARTESIAN_POINT('',(6.74,-4.85,-2.542562962528)); +#101197 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101198 = DIRECTION('',(-1.,0.,0.)); +#101199 = ADVANCED_FACE('',(#101200),#101211,.T.); +#101200 = FACE_BOUND('',#101201,.T.); +#101201 = EDGE_LOOP('',(#101202,#101203,#101209,#101210)); +#101202 = ORIENTED_EDGE('',*,*,#99909,.F.); +#101203 = ORIENTED_EDGE('',*,*,#101204,.T.); +#101204 = EDGE_CURVE('',#99910,#100084,#101205,.T.); +#101205 = LINE('',#101206,#101207); +#101206 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#101207 = VECTOR('',#101208,1.); +#101208 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101209 = ORIENTED_EDGE('',*,*,#100083,.T.); +#101210 = ORIENTED_EDGE('',*,*,#101189,.F.); +#101211 = PLANE('',#101212); +#101212 = AXIS2_PLACEMENT_3D('',#101213,#101214,#101215); +#101213 = CARTESIAN_POINT('',(6.45,-4.85,-3.5)); +#101214 = DIRECTION('',(1.,0.,0.)); +#101215 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101216 = ADVANCED_FACE('',(#101217),#101228,.T.); +#101217 = FACE_BOUND('',#101218,.T.); +#101218 = EDGE_LOOP('',(#101219,#101225,#101226,#101227)); +#101219 = ORIENTED_EDGE('',*,*,#101220,.T.); +#101220 = EDGE_CURVE('',#99918,#100092,#101221,.T.); +#101221 = LINE('',#101222,#101223); +#101222 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#101223 = VECTOR('',#101224,1.); +#101224 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101225 = ORIENTED_EDGE('',*,*,#100091,.T.); +#101226 = ORIENTED_EDGE('',*,*,#101204,.F.); +#101227 = ORIENTED_EDGE('',*,*,#99917,.F.); +#101228 = PLANE('',#101229); +#101229 = AXIS2_PLACEMENT_3D('',#101230,#101231,#101232); +#101230 = CARTESIAN_POINT('',(6.15,-4.85,-3.5)); +#101231 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#101232 = DIRECTION('',(1.,0.,0.)); +#101233 = ADVANCED_FACE('',(#101234),#101245,.T.); +#101234 = FACE_BOUND('',#101235,.T.); +#101235 = EDGE_LOOP('',(#101236,#101237,#101243,#101244)); +#101236 = ORIENTED_EDGE('',*,*,#99925,.F.); +#101237 = ORIENTED_EDGE('',*,*,#101238,.T.); +#101238 = EDGE_CURVE('',#99926,#100100,#101239,.T.); +#101239 = LINE('',#101240,#101241); +#101240 = CARTESIAN_POINT('',(6.15,-4.85,-2.542562962528)); +#101241 = VECTOR('',#101242,1.); +#101242 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101243 = ORIENTED_EDGE('',*,*,#100099,.T.); +#101244 = ORIENTED_EDGE('',*,*,#101220,.F.); +#101245 = PLANE('',#101246); +#101246 = AXIS2_PLACEMENT_3D('',#101247,#101248,#101249); +#101247 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#101248 = DIRECTION('',(-1.,0.,-0.)); +#101249 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#101250 = ADVANCED_FACE('',(#101251),#101262,.T.); +#101251 = FACE_BOUND('',#101252,.T.); +#101252 = EDGE_LOOP('',(#101253,#101254,#101255,#101261)); +#101253 = ORIENTED_EDGE('',*,*,#100536,.T.); +#101254 = ORIENTED_EDGE('',*,*,#100141,.T.); +#101255 = ORIENTED_EDGE('',*,*,#101256,.F.); +#101256 = EDGE_CURVE('',#99960,#100134,#101257,.T.); +#101257 = LINE('',#101258,#101259); +#101258 = CARTESIAN_POINT('',(6.162230377286,-4.85,-0.540767924286)); +#101259 = VECTOR('',#101260,1.); +#101260 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101261 = ORIENTED_EDGE('',*,*,#99967,.F.); +#101262 = CYLINDRICAL_SURFACE('',#101263,0.29); +#101263 = AXIS2_PLACEMENT_3D('',#101264,#101265,#101266); +#101264 = CARTESIAN_POINT('',(6.44,-4.85,-0.457437037472)); +#101265 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101266 = DIRECTION('',(-1.,0.,0.)); +#101267 = ADVANCED_FACE('',(#101268),#101279,.T.); +#101268 = FACE_BOUND('',#101269,.T.); +#101269 = EDGE_LOOP('',(#101270,#101276,#101277,#101278)); +#101270 = ORIENTED_EDGE('',*,*,#101271,.T.); +#101271 = EDGE_CURVE('',#99934,#100108,#101272,.T.); +#101272 = LINE('',#101273,#101274); +#101273 = CARTESIAN_POINT('',(6.162230377286,-4.85,-2.459232075714)); +#101274 = VECTOR('',#101275,1.); +#101275 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101276 = ORIENTED_EDGE('',*,*,#100107,.T.); +#101277 = ORIENTED_EDGE('',*,*,#101238,.F.); +#101278 = ORIENTED_EDGE('',*,*,#99933,.F.); +#101279 = CYLINDRICAL_SURFACE('',#101280,0.29); +#101280 = AXIS2_PLACEMENT_3D('',#101281,#101282,#101283); +#101281 = CARTESIAN_POINT('',(6.44,-4.85,-2.542562962528)); +#101282 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101283 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101284 = ADVANCED_FACE('',(#101285),#101296,.F.); +#101285 = FACE_BOUND('',#101286,.F.); +#101286 = EDGE_LOOP('',(#101287,#101288,#101294,#101295)); +#101287 = ORIENTED_EDGE('',*,*,#99959,.F.); +#101288 = ORIENTED_EDGE('',*,*,#101289,.T.); +#101289 = EDGE_CURVE('',#99951,#100125,#101290,.T.); +#101290 = LINE('',#101291,#101292); +#101291 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.416669113186)); +#101292 = VECTOR('',#101293,1.); +#101293 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101294 = ORIENTED_EDGE('',*,*,#100133,.T.); +#101295 = ORIENTED_EDGE('',*,*,#101256,.F.); +#101296 = PLANE('',#101297); +#101297 = AXIS2_PLACEMENT_3D('',#101298,#101299,#101300); +#101298 = CARTESIAN_POINT('',(6.45,-4.85,-1.5)); +#101299 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101300 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#101301 = ADVANCED_FACE('',(#101302),#101313,.F.); +#101302 = FACE_BOUND('',#101303,.F.); +#101303 = EDGE_LOOP('',(#101304,#101305,#101306,#101307)); +#101304 = ORIENTED_EDGE('',*,*,#99942,.F.); +#101305 = ORIENTED_EDGE('',*,*,#101271,.T.); +#101306 = ORIENTED_EDGE('',*,*,#100116,.T.); +#101307 = ORIENTED_EDGE('',*,*,#101308,.F.); +#101308 = EDGE_CURVE('',#99943,#100117,#101309,.T.); +#101309 = LINE('',#101310,#101311); +#101310 = CARTESIAN_POINT('',(6.425000733956,-4.85,-1.583330886814)); +#101311 = VECTOR('',#101312,1.); +#101312 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101313 = PLANE('',#101314); +#101314 = AXIS2_PLACEMENT_3D('',#101315,#101316,#101317); +#101315 = CARTESIAN_POINT('',(6.15,-4.85,-2.5)); +#101316 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101317 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#101318 = ADVANCED_FACE('',(#101319),#101325,.F.); +#101319 = FACE_BOUND('',#101320,.F.); +#101320 = EDGE_LOOP('',(#101321,#101322,#101323,#101324)); +#101321 = ORIENTED_EDGE('',*,*,#99950,.T.); +#101322 = ORIENTED_EDGE('',*,*,#101308,.T.); +#101323 = ORIENTED_EDGE('',*,*,#100124,.F.); +#101324 = ORIENTED_EDGE('',*,*,#101289,.F.); +#101325 = CYLINDRICAL_SURFACE('',#101326,0.29); +#101326 = AXIS2_PLACEMENT_3D('',#101327,#101328,#101329); +#101327 = CARTESIAN_POINT('',(6.147231111242,-4.85,-1.5)); +#101328 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101329 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101330 = ADVANCED_FACE('',(#101331),#101347,.F.); +#101331 = FACE_BOUND('',#101332,.F.); +#101332 = EDGE_LOOP('',(#101333,#101334,#101340,#101341)); +#101333 = ORIENTED_EDGE('',*,*,#100340,.F.); +#101334 = ORIENTED_EDGE('',*,*,#101335,.T.); +#101335 = EDGE_CURVE('',#100341,#100191,#101336,.T.); +#101336 = LINE('',#101337,#101338); +#101337 = CARTESIAN_POINT('',(6.462230377286,-0.35,-0.540767924286)); +#101338 = VECTOR('',#101339,1.); +#101339 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101340 = ORIENTED_EDGE('',*,*,#100190,.T.); +#101341 = ORIENTED_EDGE('',*,*,#101342,.F.); +#101342 = EDGE_CURVE('',#100343,#100193,#101343,.T.); +#101343 = LINE('',#101344,#101345); +#101344 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.416669113186)); +#101345 = VECTOR('',#101346,1.); +#101346 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101347 = PLANE('',#101348); +#101348 = AXIS2_PLACEMENT_3D('',#101349,#101350,#101351); +#101349 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#101350 = DIRECTION('',(-0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101351 = DIRECTION('',(0.287347885566,5.31700397722E-16,-0.957826285221 + )); +#101352 = ADVANCED_FACE('',(#101353),#101364,.F.); +#101353 = FACE_BOUND('',#101354,.F.); +#101354 = EDGE_LOOP('',(#101355,#101356,#101362,#101363)); +#101355 = ORIENTED_EDGE('',*,*,#100475,.T.); +#101356 = ORIENTED_EDGE('',*,*,#101357,.T.); +#101357 = EDGE_CURVE('',#100468,#100318,#101358,.T.); +#101358 = LINE('',#101359,#101360); +#101359 = CARTESIAN_POINT('',(6.45,-0.35,-0.457437037472)); +#101360 = VECTOR('',#101361,1.); +#101361 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101362 = ORIENTED_EDGE('',*,*,#100325,.F.); +#101363 = ORIENTED_EDGE('',*,*,#101335,.F.); +#101364 = CYLINDRICAL_SURFACE('',#101365,0.29); +#101365 = AXIS2_PLACEMENT_3D('',#101366,#101367,#101368); +#101366 = CARTESIAN_POINT('',(6.74,-0.35,-0.457437037472)); +#101367 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101368 = DIRECTION('',(-0.957826285221,9.570607158983E-17, + -0.287347885566)); +#101369 = ADVANCED_FACE('',(#101370),#101381,.T.); +#101370 = FACE_BOUND('',#101371,.T.); +#101371 = EDGE_LOOP('',(#101372,#101373,#101379,#101380)); +#101372 = ORIENTED_EDGE('',*,*,#100350,.T.); +#101373 = ORIENTED_EDGE('',*,*,#101374,.T.); +#101374 = EDGE_CURVE('',#100351,#100201,#101375,.T.); +#101375 = LINE('',#101376,#101377); +#101376 = CARTESIAN_POINT('',(6.725000733956,-0.35,-1.583330886814)); +#101377 = VECTOR('',#101378,1.); +#101378 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101379 = ORIENTED_EDGE('',*,*,#100200,.F.); +#101380 = ORIENTED_EDGE('',*,*,#101342,.F.); +#101381 = CYLINDRICAL_SURFACE('',#101382,0.29); +#101382 = AXIS2_PLACEMENT_3D('',#101383,#101384,#101385); +#101383 = CARTESIAN_POINT('',(6.447231111242,-0.35,-1.5)); +#101384 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101385 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101386 = ADVANCED_FACE('',(#101387),#101398,.T.); +#101387 = FACE_BOUND('',#101388,.T.); +#101388 = EDGE_LOOP('',(#101389,#101390,#101391,#101392)); +#101389 = ORIENTED_EDGE('',*,*,#100467,.F.); +#101390 = ORIENTED_EDGE('',*,*,#101357,.T.); +#101391 = ORIENTED_EDGE('',*,*,#100317,.T.); +#101392 = ORIENTED_EDGE('',*,*,#101393,.F.); +#101393 = EDGE_CURVE('',#100459,#100309,#101394,.T.); +#101394 = LINE('',#101395,#101396); +#101395 = CARTESIAN_POINT('',(6.45,-0.35,1.21)); +#101396 = VECTOR('',#101397,1.); +#101397 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101398 = PLANE('',#101399); +#101399 = AXIS2_PLACEMENT_3D('',#101400,#101401,#101402); +#101400 = CARTESIAN_POINT('',(6.45,-0.35,-0.5)); +#101401 = DIRECTION('',(1.,0.,0.)); +#101402 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101403 = ADVANCED_FACE('',(#101404),#101415,.F.); +#101404 = FACE_BOUND('',#101405,.F.); +#101405 = EDGE_LOOP('',(#101406,#101407,#101408,#101409)); +#101406 = ORIENTED_EDGE('',*,*,#100359,.F.); +#101407 = ORIENTED_EDGE('',*,*,#101374,.T.); +#101408 = ORIENTED_EDGE('',*,*,#100209,.T.); +#101409 = ORIENTED_EDGE('',*,*,#101410,.F.); +#101410 = EDGE_CURVE('',#100360,#100210,#101411,.T.); +#101411 = LINE('',#101412,#101413); +#101412 = CARTESIAN_POINT('',(6.462230377286,-0.35,-2.459232075714)); +#101413 = VECTOR('',#101414,1.); +#101414 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101415 = PLANE('',#101416); +#101416 = AXIS2_PLACEMENT_3D('',#101417,#101418,#101419); +#101417 = CARTESIAN_POINT('',(6.75,-0.35,-1.5)); +#101418 = DIRECTION('',(-0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101419 = DIRECTION('',(-0.287347885566,5.31700397722E-16, + -0.957826285221)); +#101420 = ADVANCED_FACE('',(#101421),#101427,.T.); +#101421 = FACE_BOUND('',#101422,.T.); +#101422 = EDGE_LOOP('',(#101423,#101424,#101425,#101426)); +#101423 = ORIENTED_EDGE('',*,*,#101393,.T.); +#101424 = ORIENTED_EDGE('',*,*,#100308,.T.); +#101425 = ORIENTED_EDGE('',*,*,#100491,.F.); +#101426 = ORIENTED_EDGE('',*,*,#100458,.F.); +#101427 = CYLINDRICAL_SURFACE('',#101428,0.29); +#101428 = AXIS2_PLACEMENT_3D('',#101429,#101430,#101431); +#101429 = CARTESIAN_POINT('',(6.16,-0.35,1.21)); +#101430 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101431 = DIRECTION('',(1.,0.,-0.)); +#101432 = ADVANCED_FACE('',(#101433),#101444,.F.); +#101433 = FACE_BOUND('',#101434,.F.); +#101434 = EDGE_LOOP('',(#101435,#101436,#101437,#101438)); +#101435 = ORIENTED_EDGE('',*,*,#100367,.T.); +#101436 = ORIENTED_EDGE('',*,*,#101410,.T.); +#101437 = ORIENTED_EDGE('',*,*,#100217,.F.); +#101438 = ORIENTED_EDGE('',*,*,#101439,.F.); +#101439 = EDGE_CURVE('',#100368,#100218,#101440,.T.); +#101440 = LINE('',#101441,#101442); +#101441 = CARTESIAN_POINT('',(6.45,-0.35,-2.542562962528)); +#101442 = VECTOR('',#101443,1.); +#101443 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101444 = CYLINDRICAL_SURFACE('',#101445,0.29); +#101445 = AXIS2_PLACEMENT_3D('',#101446,#101447,#101448); +#101446 = CARTESIAN_POINT('',(6.74,-0.35,-2.542562962528)); +#101447 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101448 = DIRECTION('',(-1.,0.,0.)); +#101449 = ADVANCED_FACE('',(#101450),#101461,.T.); +#101450 = FACE_BOUND('',#101451,.T.); +#101451 = EDGE_LOOP('',(#101452,#101453,#101459,#101460)); +#101452 = ORIENTED_EDGE('',*,*,#100376,.F.); +#101453 = ORIENTED_EDGE('',*,*,#101454,.T.); +#101454 = EDGE_CURVE('',#100377,#100227,#101455,.T.); +#101455 = LINE('',#101456,#101457); +#101456 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#101457 = VECTOR('',#101458,1.); +#101458 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101459 = ORIENTED_EDGE('',*,*,#100226,.T.); +#101460 = ORIENTED_EDGE('',*,*,#101439,.F.); +#101461 = PLANE('',#101462); +#101462 = AXIS2_PLACEMENT_3D('',#101463,#101464,#101465); +#101463 = CARTESIAN_POINT('',(6.45,-0.35,-3.5)); +#101464 = DIRECTION('',(1.,0.,0.)); +#101465 = DIRECTION('',(0.,-5.551115123126E-16,1.)); +#101466 = ADVANCED_FACE('',(#101467),#101478,.T.); +#101467 = FACE_BOUND('',#101468,.T.); +#101468 = EDGE_LOOP('',(#101469,#101475,#101476,#101477)); +#101469 = ORIENTED_EDGE('',*,*,#101470,.T.); +#101470 = EDGE_CURVE('',#100385,#100235,#101471,.T.); +#101471 = LINE('',#101472,#101473); +#101472 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#101473 = VECTOR('',#101474,1.); +#101474 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101475 = ORIENTED_EDGE('',*,*,#100234,.T.); +#101476 = ORIENTED_EDGE('',*,*,#101454,.F.); +#101477 = ORIENTED_EDGE('',*,*,#100384,.F.); +#101478 = PLANE('',#101479); +#101479 = AXIS2_PLACEMENT_3D('',#101480,#101481,#101482); +#101480 = CARTESIAN_POINT('',(6.15,-0.35,-3.5)); +#101481 = DIRECTION('',(0.,3.330669073875E-16,-1.)); +#101482 = DIRECTION('',(1.,0.,0.)); +#101483 = ADVANCED_FACE('',(#101484),#101495,.T.); +#101484 = FACE_BOUND('',#101485,.T.); +#101485 = EDGE_LOOP('',(#101486,#101487,#101493,#101494)); +#101486 = ORIENTED_EDGE('',*,*,#100392,.F.); +#101487 = ORIENTED_EDGE('',*,*,#101488,.T.); +#101488 = EDGE_CURVE('',#100393,#100243,#101489,.T.); +#101489 = LINE('',#101490,#101491); +#101490 = CARTESIAN_POINT('',(6.15,-0.35,-2.542562962528)); +#101491 = VECTOR('',#101492,1.); +#101492 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101493 = ORIENTED_EDGE('',*,*,#100242,.T.); +#101494 = ORIENTED_EDGE('',*,*,#101470,.F.); +#101495 = PLANE('',#101496); +#101496 = AXIS2_PLACEMENT_3D('',#101497,#101498,#101499); +#101497 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#101498 = DIRECTION('',(-1.,0.,-0.)); +#101499 = DIRECTION('',(0.,5.551115123126E-16,-1.)); +#101500 = ADVANCED_FACE('',(#101501),#101512,.T.); +#101501 = FACE_BOUND('',#101502,.T.); +#101502 = EDGE_LOOP('',(#101503,#101504,#101505,#101511)); +#101503 = ORIENTED_EDGE('',*,*,#100570,.T.); +#101504 = ORIENTED_EDGE('',*,*,#100284,.T.); +#101505 = ORIENTED_EDGE('',*,*,#101506,.F.); +#101506 = EDGE_CURVE('',#100427,#100277,#101507,.T.); +#101507 = LINE('',#101508,#101509); +#101508 = CARTESIAN_POINT('',(6.162230377286,-0.35,-0.540767924286)); +#101509 = VECTOR('',#101510,1.); +#101510 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101511 = ORIENTED_EDGE('',*,*,#100434,.F.); +#101512 = CYLINDRICAL_SURFACE('',#101513,0.29); +#101513 = AXIS2_PLACEMENT_3D('',#101514,#101515,#101516); +#101514 = CARTESIAN_POINT('',(6.44,-0.35,-0.457437037472)); +#101515 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101516 = DIRECTION('',(-1.,0.,0.)); +#101517 = ADVANCED_FACE('',(#101518),#101529,.T.); +#101518 = FACE_BOUND('',#101519,.T.); +#101519 = EDGE_LOOP('',(#101520,#101526,#101527,#101528)); +#101520 = ORIENTED_EDGE('',*,*,#101521,.T.); +#101521 = EDGE_CURVE('',#100401,#100251,#101522,.T.); +#101522 = LINE('',#101523,#101524); +#101523 = CARTESIAN_POINT('',(6.162230377286,-0.35,-2.459232075714)); +#101524 = VECTOR('',#101525,1.); +#101525 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101526 = ORIENTED_EDGE('',*,*,#100250,.T.); +#101527 = ORIENTED_EDGE('',*,*,#101488,.F.); +#101528 = ORIENTED_EDGE('',*,*,#100400,.F.); +#101529 = CYLINDRICAL_SURFACE('',#101530,0.29); +#101530 = AXIS2_PLACEMENT_3D('',#101531,#101532,#101533); +#101531 = CARTESIAN_POINT('',(6.44,-0.35,-2.542562962528)); +#101532 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101533 = DIRECTION('',(-0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101534 = ADVANCED_FACE('',(#101535),#101546,.F.); +#101535 = FACE_BOUND('',#101536,.F.); +#101536 = EDGE_LOOP('',(#101537,#101538,#101544,#101545)); +#101537 = ORIENTED_EDGE('',*,*,#100426,.F.); +#101538 = ORIENTED_EDGE('',*,*,#101539,.T.); +#101539 = EDGE_CURVE('',#100418,#100268,#101540,.T.); +#101540 = LINE('',#101541,#101542); +#101541 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.416669113186)); +#101542 = VECTOR('',#101543,1.); +#101543 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101544 = ORIENTED_EDGE('',*,*,#100276,.T.); +#101545 = ORIENTED_EDGE('',*,*,#101506,.F.); +#101546 = PLANE('',#101547); +#101547 = AXIS2_PLACEMENT_3D('',#101548,#101549,#101550); +#101548 = CARTESIAN_POINT('',(6.45,-0.35,-1.5)); +#101549 = DIRECTION('',(0.957826285221,-9.570607158995E-17, + 0.287347885566)); +#101550 = DIRECTION('',(-0.287347885566,-5.31700397722E-16, + 0.957826285221)); +#101551 = ADVANCED_FACE('',(#101552),#101563,.F.); +#101552 = FACE_BOUND('',#101553,.F.); +#101553 = EDGE_LOOP('',(#101554,#101555,#101556,#101557)); +#101554 = ORIENTED_EDGE('',*,*,#100409,.F.); +#101555 = ORIENTED_EDGE('',*,*,#101521,.T.); +#101556 = ORIENTED_EDGE('',*,*,#100259,.T.); +#101557 = ORIENTED_EDGE('',*,*,#101558,.F.); +#101558 = EDGE_CURVE('',#100410,#100260,#101559,.T.); +#101559 = LINE('',#101560,#101561); +#101560 = CARTESIAN_POINT('',(6.425000733956,-0.35,-1.583330886814)); +#101561 = VECTOR('',#101562,1.); +#101562 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101563 = PLANE('',#101564); +#101564 = AXIS2_PLACEMENT_3D('',#101565,#101566,#101567); +#101565 = CARTESIAN_POINT('',(6.15,-0.35,-2.5)); +#101566 = DIRECTION('',(0.957826285221,9.570607158995E-17, + -0.287347885566)); +#101567 = DIRECTION('',(0.287347885566,-5.31700397722E-16,0.957826285221 + )); +#101568 = ADVANCED_FACE('',(#101569),#101575,.F.); +#101569 = FACE_BOUND('',#101570,.F.); +#101570 = EDGE_LOOP('',(#101571,#101572,#101573,#101574)); +#101571 = ORIENTED_EDGE('',*,*,#100417,.T.); +#101572 = ORIENTED_EDGE('',*,*,#101558,.T.); +#101573 = ORIENTED_EDGE('',*,*,#100267,.F.); +#101574 = ORIENTED_EDGE('',*,*,#101539,.F.); +#101575 = CYLINDRICAL_SURFACE('',#101576,0.29); +#101576 = AXIS2_PLACEMENT_3D('',#101577,#101578,#101579); +#101577 = CARTESIAN_POINT('',(6.147231111242,-0.35,-1.5)); +#101578 = DIRECTION('',(0.,1.,3.330669073875E-16)); +#101579 = DIRECTION('',(0.957826285221,-9.570607158983E-17, + 0.287347885566)); +#101580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#101584)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#101581,#101582,#101583)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#101581 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#101582 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#101583 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#101584 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#101581, + 'distance_accuracy_value','confusion accuracy'); +#101585 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101586,#101588); +#101586 = ( REPRESENTATION_RELATIONSHIP('','',#98350,#98327) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101587) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101587 = ITEM_DEFINED_TRANSFORMATION('','',#11,#98328); +#101588 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101589); +#101589 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('122','=>[0:1:1:60]','',#98322, + #98345,$); +#101590 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#98347)); +#101591 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101592,#101594); +#101592 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101593) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101593 = ITEM_DEFINED_TRANSFORMATION('','',#11,#375); +#101594 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101595); +#101595 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('124','R58','',#5,#523,$); +#101596 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101597,#101599); +#101597 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101598) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101598 = ITEM_DEFINED_TRANSFORMATION('','',#11,#379); +#101599 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101600); +#101600 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('125','Rrp','',#5,#523,$); +#101601 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101602,#101604); +#101602 = ( REPRESENTATION_RELATIONSHIP('','',#36161,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101603) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101603 = ITEM_DEFINED_TRANSFORMATION('','',#11,#383); +#101604 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101605); +#101605 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('126','Q6','',#5,#36156,$); +#101606 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101607,#101609); +#101607 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101608) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101608 = ITEM_DEFINED_TRANSFORMATION('','',#11,#387); +#101609 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101610); +#101610 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('127','C31','',#5,#14742,$); +#101611 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101612,#101614); +#101612 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101613) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101613 = ITEM_DEFINED_TRANSFORMATION('','',#11,#391); +#101614 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101615); +#101615 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('128','R21','',#5,#523,$); +#101616 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101617,#101619); +#101617 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101618) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101618 = ITEM_DEFINED_TRANSFORMATION('','',#11,#395); +#101619 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101620); +#101620 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('129','C30','',#5,#42695,$); +#101621 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101622,#101624); +#101622 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101623) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101623 = ITEM_DEFINED_TRANSFORMATION('','',#11,#399); +#101624 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101625); +#101625 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('130','R7','',#5,#523,$); +#101626 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101627,#101629); +#101627 = ( REPRESENTATION_RELATIONSHIP('','',#88978,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101628) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101628 = ITEM_DEFINED_TRANSFORMATION('','',#11,#403); +#101629 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101630); +#101630 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('131','C3','',#5,#88973,$); +#101631 = SHAPE_DEFINITION_REPRESENTATION(#101632,#101638); +#101632 = PRODUCT_DEFINITION_SHAPE('','',#101633); +#101633 = PRODUCT_DEFINITION('design','',#101634,#101637); +#101634 = PRODUCT_DEFINITION_FORMATION('','',#101635); +#101635 = PRODUCT('D_SOD-123','D_SOD-123','',(#101636)); +#101636 = PRODUCT_CONTEXT('',#2,'mechanical'); +#101637 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#101638 = SHAPE_REPRESENTATION('',(#11,#101639),#101643); +#101639 = AXIS2_PLACEMENT_3D('',#101640,#101641,#101642); +#101640 = CARTESIAN_POINT('',(0.,0.,0.)); +#101641 = DIRECTION('',(0.,0.,1.)); +#101642 = DIRECTION('',(1.,0.,-0.)); +#101643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#101647)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#101644,#101645,#101646)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#101644 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#101645 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#101646 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#101647 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#101644, + 'distance_accuracy_value','confusion accuracy'); +#101648 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#101649,#101651); +#101649 = ( REPRESENTATION_RELATIONSHIP('','',#101638,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#101650) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#101650 = ITEM_DEFINED_TRANSFORMATION('','',#11,#407); +#101651 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #101652); +#101652 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('133','D5','',#5,#101633,$); +#101653 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#101635)); +#101654 = SHAPE_DEFINITION_REPRESENTATION(#101655,#101661); +#101655 = PRODUCT_DEFINITION_SHAPE('','',#101656); +#101656 = PRODUCT_DEFINITION('design','',#101657,#101660); +#101657 = PRODUCT_DEFINITION_FORMATION('','',#101658); +#101658 = PRODUCT('D_SOD-123','D_SOD-123','',(#101659)); +#101659 = PRODUCT_CONTEXT('',#2,'mechanical'); +#101660 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#101661 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#101662),#103350); +#101662 = MANIFOLD_SOLID_BREP('',#101663); +#101663 = CLOSED_SHELL('',(#101664,#101718,#101781,#101804,#101834, + #101867,#101897,#101920,#101943,#101966,#101989,#102012,#102045, + #102068,#102091,#102179,#102254,#102278,#102346,#102434,#102450, + #102466,#102482,#102498,#102515,#102548,#102565,#102587,#102618, + #102641,#102664,#102687,#102717,#102734,#102751,#102768,#102785, + #102802,#102819,#102836,#102848,#102871,#102894,#102911,#102986, + #103010,#103078,#103095,#103145,#103162,#103179,#103196,#103213, + #103230,#103242,#103273,#103297,#103321,#103338)); +#101664 = ADVANCED_FACE('',(#101665),#101713,.F.); +#101665 = FACE_BOUND('',#101666,.F.); +#101666 = EDGE_LOOP('',(#101667,#101677,#101684,#101692,#101700,#101708) + ); +#101667 = ORIENTED_EDGE('',*,*,#101668,.T.); +#101668 = EDGE_CURVE('',#101669,#101671,#101673,.T.); +#101669 = VERTEX_POINT('',#101670); +#101670 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101671 = VERTEX_POINT('',#101672); +#101672 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101673 = LINE('',#101674,#101675); +#101674 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101675 = VECTOR('',#101676,1.); +#101676 = DIRECTION('',(0.,1.,0.)); +#101677 = ORIENTED_EDGE('',*,*,#101678,.T.); +#101678 = EDGE_CURVE('',#101671,#101679,#101681,.T.); +#101679 = VERTEX_POINT('',#101680); +#101680 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101681 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101682,#101683), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101682 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101683 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101684 = ORIENTED_EDGE('',*,*,#101685,.F.); +#101685 = EDGE_CURVE('',#101686,#101679,#101688,.T.); +#101686 = VERTEX_POINT('',#101687); +#101687 = CARTESIAN_POINT('',(-1.375,0.325,0.575)); +#101688 = LINE('',#101689,#101690); +#101689 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101690 = VECTOR('',#101691,1.); +#101691 = DIRECTION('',(0.,1.,0.)); +#101692 = ORIENTED_EDGE('',*,*,#101693,.F.); +#101693 = EDGE_CURVE('',#101694,#101686,#101696,.T.); +#101694 = VERTEX_POINT('',#101695); +#101695 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#101696 = LINE('',#101697,#101698); +#101697 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#101698 = VECTOR('',#101699,1.); +#101699 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#101700 = ORIENTED_EDGE('',*,*,#101701,.F.); +#101701 = EDGE_CURVE('',#101702,#101694,#101704,.T.); +#101702 = VERTEX_POINT('',#101703); +#101703 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101704 = LINE('',#101705,#101706); +#101705 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101706 = VECTOR('',#101707,1.); +#101707 = DIRECTION('',(0.,1.,0.)); +#101708 = ORIENTED_EDGE('',*,*,#101709,.F.); +#101709 = EDGE_CURVE('',#101669,#101702,#101710,.T.); +#101710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101711,#101712), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101711 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101712 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101713 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101714,#101715) + ,(#101716,#101717 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101714 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101715 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101716 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101717 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101718 = ADVANCED_FACE('',(#101719),#101776,.F.); +#101719 = FACE_BOUND('',#101720,.T.); +#101720 = EDGE_LOOP('',(#101721,#101722,#101730,#101738,#101746,#101754, + #101762,#101770)); +#101721 = ORIENTED_EDGE('',*,*,#101668,.T.); +#101722 = ORIENTED_EDGE('',*,*,#101723,.T.); +#101723 = EDGE_CURVE('',#101671,#101724,#101726,.T.); +#101724 = VERTEX_POINT('',#101725); +#101725 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101726 = LINE('',#101727,#101728); +#101727 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101728 = VECTOR('',#101729,1.); +#101729 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#101730 = ORIENTED_EDGE('',*,*,#101731,.T.); +#101731 = EDGE_CURVE('',#101724,#101732,#101734,.T.); +#101732 = VERTEX_POINT('',#101733); +#101733 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101734 = LINE('',#101735,#101736); +#101735 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101736 = VECTOR('',#101737,1.); +#101737 = DIRECTION('',(1.,0.,0.)); +#101738 = ORIENTED_EDGE('',*,*,#101739,.T.); +#101739 = EDGE_CURVE('',#101732,#101740,#101742,.T.); +#101740 = VERTEX_POINT('',#101741); +#101741 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#101742 = LINE('',#101743,#101744); +#101743 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101744 = VECTOR('',#101745,1.); +#101745 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#101746 = ORIENTED_EDGE('',*,*,#101747,.T.); +#101747 = EDGE_CURVE('',#101740,#101748,#101750,.T.); +#101748 = VERTEX_POINT('',#101749); +#101749 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101750 = LINE('',#101751,#101752); +#101751 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#101752 = VECTOR('',#101753,1.); +#101753 = DIRECTION('',(0.,-1.,0.)); +#101754 = ORIENTED_EDGE('',*,*,#101755,.T.); +#101755 = EDGE_CURVE('',#101748,#101756,#101758,.T.); +#101756 = VERTEX_POINT('',#101757); +#101757 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101758 = LINE('',#101759,#101760); +#101759 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101760 = VECTOR('',#101761,1.); +#101761 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#101762 = ORIENTED_EDGE('',*,*,#101763,.T.); +#101763 = EDGE_CURVE('',#101756,#101764,#101766,.T.); +#101764 = VERTEX_POINT('',#101765); +#101765 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101766 = LINE('',#101767,#101768); +#101767 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101768 = VECTOR('',#101769,1.); +#101769 = DIRECTION('',(-1.,0.,0.)); +#101770 = ORIENTED_EDGE('',*,*,#101771,.T.); +#101771 = EDGE_CURVE('',#101764,#101669,#101772,.T.); +#101772 = LINE('',#101773,#101774); +#101773 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101774 = VECTOR('',#101775,1.); +#101775 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#101776 = PLANE('',#101777); +#101777 = AXIS2_PLACEMENT_3D('',#101778,#101779,#101780); +#101778 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101779 = DIRECTION('',(0.,0.,1.)); +#101780 = DIRECTION('',(0.889616464678,0.456708381546,-0.)); +#101781 = ADVANCED_FACE('',(#101782),#101799,.F.); +#101782 = FACE_BOUND('',#101783,.F.); +#101783 = EDGE_LOOP('',(#101784,#101785,#101792,#101798)); +#101784 = ORIENTED_EDGE('',*,*,#101723,.T.); +#101785 = ORIENTED_EDGE('',*,*,#101786,.T.); +#101786 = EDGE_CURVE('',#101724,#101787,#101789,.T.); +#101787 = VERTEX_POINT('',#101788); +#101788 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101790,#101791), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101790 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101791 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101792 = ORIENTED_EDGE('',*,*,#101793,.F.); +#101793 = EDGE_CURVE('',#101679,#101787,#101794,.T.); +#101794 = LINE('',#101795,#101796); +#101795 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101796 = VECTOR('',#101797,1.); +#101797 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#101798 = ORIENTED_EDGE('',*,*,#101678,.F.); +#101799 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101800,#101801) + ,(#101802,#101803 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#101800 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#101801 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101802 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101803 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101804 = ADVANCED_FACE('',(#101805),#101829,.F.); +#101805 = FACE_BOUND('',#101806,.F.); +#101806 = EDGE_LOOP('',(#101807,#101814,#101815,#101823)); +#101807 = ORIENTED_EDGE('',*,*,#101808,.F.); +#101808 = EDGE_CURVE('',#101702,#101809,#101811,.T.); +#101809 = VERTEX_POINT('',#101810); +#101810 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101811 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101812,#101813), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101812 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101813 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101814 = ORIENTED_EDGE('',*,*,#101701,.T.); +#101815 = ORIENTED_EDGE('',*,*,#101816,.T.); +#101816 = EDGE_CURVE('',#101694,#101817,#101819,.T.); +#101817 = VERTEX_POINT('',#101818); +#101818 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#101819 = LINE('',#101820,#101821); +#101820 = CARTESIAN_POINT('',(-1.375,-0.325,0.579830288983)); +#101821 = VECTOR('',#101822,1.); +#101822 = DIRECTION('',(0.,0.,1.)); +#101823 = ORIENTED_EDGE('',*,*,#101824,.F.); +#101824 = EDGE_CURVE('',#101809,#101817,#101825,.T.); +#101825 = LINE('',#101826,#101827); +#101826 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101827 = VECTOR('',#101828,1.); +#101828 = DIRECTION('',(0.,1.,0.)); +#101829 = PLANE('',#101830); +#101830 = AXIS2_PLACEMENT_3D('',#101831,#101832,#101833); +#101831 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101832 = DIRECTION('',(1.,0.,0.)); +#101833 = DIRECTION('',(-0.,1.,0.)); +#101834 = ADVANCED_FACE('',(#101835),#101862,.F.); +#101835 = FACE_BOUND('',#101836,.F.); +#101836 = EDGE_LOOP('',(#101837,#101838,#101847,#101855)); +#101837 = ORIENTED_EDGE('',*,*,#101693,.T.); +#101838 = ORIENTED_EDGE('',*,*,#101839,.T.); +#101839 = EDGE_CURVE('',#101686,#101840,#101842,.T.); +#101840 = VERTEX_POINT('',#101841); +#101841 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#101842 = CIRCLE('',#101843,0.12); +#101843 = AXIS2_PLACEMENT_3D('',#101844,#101845,#101846); +#101844 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#101845 = DIRECTION('',(-1.110223024625E-16,-1.,-1.003534056487E-47)); +#101846 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#101847 = ORIENTED_EDGE('',*,*,#101848,.F.); +#101848 = EDGE_CURVE('',#101849,#101840,#101851,.T.); +#101849 = VERTEX_POINT('',#101850); +#101850 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#101851 = LINE('',#101852,#101853); +#101852 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#101853 = VECTOR('',#101854,1.); +#101854 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#101855 = ORIENTED_EDGE('',*,*,#101856,.F.); +#101856 = EDGE_CURVE('',#101694,#101849,#101857,.T.); +#101857 = CIRCLE('',#101858,0.12); +#101858 = AXIS2_PLACEMENT_3D('',#101859,#101860,#101861); +#101859 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#101860 = DIRECTION('',(-1.110223024625E-16,-1.,-1.003534056487E-47)); +#101861 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#101862 = CYLINDRICAL_SURFACE('',#101863,0.12); +#101863 = AXIS2_PLACEMENT_3D('',#101864,#101865,#101866); +#101864 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#101865 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#101866 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#101867 = ADVANCED_FACE('',(#101868),#101892,.F.); +#101868 = FACE_BOUND('',#101869,.F.); +#101869 = EDGE_LOOP('',(#101870,#101878,#101879,#101886)); +#101870 = ORIENTED_EDGE('',*,*,#101871,.F.); +#101871 = EDGE_CURVE('',#101686,#101872,#101874,.T.); +#101872 = VERTEX_POINT('',#101873); +#101873 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#101874 = LINE('',#101875,#101876); +#101875 = CARTESIAN_POINT('',(-1.375,0.325,0.579830288983)); +#101876 = VECTOR('',#101877,1.); +#101877 = DIRECTION('',(0.,0.,1.)); +#101878 = ORIENTED_EDGE('',*,*,#101685,.T.); +#101879 = ORIENTED_EDGE('',*,*,#101880,.T.); +#101880 = EDGE_CURVE('',#101679,#101881,#101883,.T.); +#101881 = VERTEX_POINT('',#101882); +#101882 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#101883 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101884,#101885), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101884 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#101885 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#101886 = ORIENTED_EDGE('',*,*,#101887,.F.); +#101887 = EDGE_CURVE('',#101872,#101881,#101888,.T.); +#101888 = LINE('',#101889,#101890); +#101889 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101890 = VECTOR('',#101891,1.); +#101891 = DIRECTION('',(0.,1.,0.)); +#101892 = PLANE('',#101893); +#101893 = AXIS2_PLACEMENT_3D('',#101894,#101895,#101896); +#101894 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#101895 = DIRECTION('',(1.,0.,0.)); +#101896 = DIRECTION('',(-0.,1.,0.)); +#101897 = ADVANCED_FACE('',(#101898),#101915,.F.); +#101898 = FACE_BOUND('',#101899,.F.); +#101899 = EDGE_LOOP('',(#101900,#101901,#101902,#101910)); +#101900 = ORIENTED_EDGE('',*,*,#101771,.T.); +#101901 = ORIENTED_EDGE('',*,*,#101709,.T.); +#101902 = ORIENTED_EDGE('',*,*,#101903,.F.); +#101903 = EDGE_CURVE('',#101904,#101702,#101906,.T.); +#101904 = VERTEX_POINT('',#101905); +#101905 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101906 = LINE('',#101907,#101908); +#101907 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101908 = VECTOR('',#101909,1.); +#101909 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#101910 = ORIENTED_EDGE('',*,*,#101911,.F.); +#101911 = EDGE_CURVE('',#101764,#101904,#101912,.T.); +#101912 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101913,#101914), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101913 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101914 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101915 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101916,#101917) + ,(#101918,#101919 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#101916 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101917 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101918 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#101919 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#101920 = ADVANCED_FACE('',(#101921),#101938,.F.); +#101921 = FACE_BOUND('',#101922,.F.); +#101922 = EDGE_LOOP('',(#101923,#101924,#101925,#101933)); +#101923 = ORIENTED_EDGE('',*,*,#101763,.T.); +#101924 = ORIENTED_EDGE('',*,*,#101911,.T.); +#101925 = ORIENTED_EDGE('',*,*,#101926,.F.); +#101926 = EDGE_CURVE('',#101927,#101904,#101929,.T.); +#101927 = VERTEX_POINT('',#101928); +#101928 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101929 = LINE('',#101930,#101931); +#101930 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101931 = VECTOR('',#101932,1.); +#101932 = DIRECTION('',(-1.,0.,0.)); +#101933 = ORIENTED_EDGE('',*,*,#101934,.F.); +#101934 = EDGE_CURVE('',#101756,#101927,#101935,.T.); +#101935 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101936,#101937), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101936 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101937 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101938 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101939,#101940) + ,(#101941,#101942 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101939 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101940 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101941 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#101942 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#101943 = ADVANCED_FACE('',(#101944),#101961,.F.); +#101944 = FACE_BOUND('',#101945,.F.); +#101945 = EDGE_LOOP('',(#101946,#101947,#101954,#101960)); +#101946 = ORIENTED_EDGE('',*,*,#101731,.T.); +#101947 = ORIENTED_EDGE('',*,*,#101948,.T.); +#101948 = EDGE_CURVE('',#101732,#101949,#101951,.T.); +#101949 = VERTEX_POINT('',#101950); +#101950 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#101951 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101952,#101953), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101952 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101953 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#101954 = ORIENTED_EDGE('',*,*,#101955,.F.); +#101955 = EDGE_CURVE('',#101787,#101949,#101956,.T.); +#101956 = LINE('',#101957,#101958); +#101957 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101958 = VECTOR('',#101959,1.); +#101959 = DIRECTION('',(1.,0.,0.)); +#101960 = ORIENTED_EDGE('',*,*,#101786,.F.); +#101961 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101962,#101963) + ,(#101964,#101965 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101962 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#101963 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#101964 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#101965 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#101966 = ADVANCED_FACE('',(#101967),#101984,.F.); +#101967 = FACE_BOUND('',#101968,.F.); +#101968 = EDGE_LOOP('',(#101969,#101970,#101971,#101979)); +#101969 = ORIENTED_EDGE('',*,*,#101755,.T.); +#101970 = ORIENTED_EDGE('',*,*,#101934,.T.); +#101971 = ORIENTED_EDGE('',*,*,#101972,.F.); +#101972 = EDGE_CURVE('',#101973,#101927,#101975,.T.); +#101973 = VERTEX_POINT('',#101974); +#101974 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101975 = LINE('',#101976,#101977); +#101976 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101977 = VECTOR('',#101978,1.); +#101978 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#101979 = ORIENTED_EDGE('',*,*,#101980,.F.); +#101980 = EDGE_CURVE('',#101748,#101973,#101981,.T.); +#101981 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101982,#101983), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101982 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101983 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101984 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#101985,#101986) + ,(#101987,#101988 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#101985 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#101986 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#101987 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#101988 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#101989 = ADVANCED_FACE('',(#101990),#102007,.F.); +#101990 = FACE_BOUND('',#101991,.F.); +#101991 = EDGE_LOOP('',(#101992,#101993,#102000,#102006)); +#101992 = ORIENTED_EDGE('',*,*,#101739,.T.); +#101993 = ORIENTED_EDGE('',*,*,#101994,.T.); +#101994 = EDGE_CURVE('',#101740,#101995,#101997,.T.); +#101995 = VERTEX_POINT('',#101996); +#101996 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#101997 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#101998,#101999), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#101998 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#101999 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102000 = ORIENTED_EDGE('',*,*,#102001,.F.); +#102001 = EDGE_CURVE('',#101949,#101995,#102002,.T.); +#102002 = LINE('',#102003,#102004); +#102003 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#102004 = VECTOR('',#102005,1.); +#102005 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102006 = ORIENTED_EDGE('',*,*,#101948,.F.); +#102007 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102008,#102009) + ,(#102010,#102011 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102008 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#102009 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#102010 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#102011 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102012 = ADVANCED_FACE('',(#102013),#102040,.F.); +#102013 = FACE_BOUND('',#102014,.F.); +#102014 = EDGE_LOOP('',(#102015,#102016,#102017,#102025,#102033,#102039) + ); +#102015 = ORIENTED_EDGE('',*,*,#101747,.T.); +#102016 = ORIENTED_EDGE('',*,*,#101980,.T.); +#102017 = ORIENTED_EDGE('',*,*,#102018,.F.); +#102018 = EDGE_CURVE('',#102019,#101973,#102021,.T.); +#102019 = VERTEX_POINT('',#102020); +#102020 = CARTESIAN_POINT('',(1.375,-0.325,0.575)); +#102021 = LINE('',#102022,#102023); +#102022 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102023 = VECTOR('',#102024,1.); +#102024 = DIRECTION('',(0.,-1.,0.)); +#102025 = ORIENTED_EDGE('',*,*,#102026,.F.); +#102026 = EDGE_CURVE('',#102027,#102019,#102029,.T.); +#102027 = VERTEX_POINT('',#102028); +#102028 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#102029 = LINE('',#102030,#102031); +#102030 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#102031 = VECTOR('',#102032,1.); +#102032 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102033 = ORIENTED_EDGE('',*,*,#102034,.F.); +#102034 = EDGE_CURVE('',#101995,#102027,#102035,.T.); +#102035 = LINE('',#102036,#102037); +#102036 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102037 = VECTOR('',#102038,1.); +#102038 = DIRECTION('',(0.,-1.,0.)); +#102039 = ORIENTED_EDGE('',*,*,#101994,.F.); +#102040 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102041,#102042) + ,(#102043,#102044 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102041 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#102042 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102043 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#102044 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#102045 = ADVANCED_FACE('',(#102046),#102063,.F.); +#102046 = FACE_BOUND('',#102047,.F.); +#102047 = EDGE_LOOP('',(#102048,#102049,#102056,#102062)); +#102048 = ORIENTED_EDGE('',*,*,#101793,.T.); +#102049 = ORIENTED_EDGE('',*,*,#102050,.T.); +#102050 = EDGE_CURVE('',#101787,#102051,#102053,.T.); +#102051 = VERTEX_POINT('',#102052); +#102052 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102053 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102054,#102055), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102054 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#102055 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102056 = ORIENTED_EDGE('',*,*,#102057,.F.); +#102057 = EDGE_CURVE('',#101881,#102051,#102058,.T.); +#102058 = LINE('',#102059,#102060); +#102059 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#102060 = VECTOR('',#102061,1.); +#102061 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102062 = ORIENTED_EDGE('',*,*,#101880,.F.); +#102063 = PLANE('',#102064); +#102064 = AXIS2_PLACEMENT_3D('',#102065,#102066,#102067); +#102065 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#102066 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102067 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102068 = ADVANCED_FACE('',(#102069),#102086,.F.); +#102069 = FACE_BOUND('',#102070,.F.); +#102070 = EDGE_LOOP('',(#102071,#102072,#102073,#102081)); +#102071 = ORIENTED_EDGE('',*,*,#101903,.T.); +#102072 = ORIENTED_EDGE('',*,*,#101808,.T.); +#102073 = ORIENTED_EDGE('',*,*,#102074,.F.); +#102074 = EDGE_CURVE('',#102075,#101809,#102077,.T.); +#102075 = VERTEX_POINT('',#102076); +#102076 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102077 = LINE('',#102078,#102079); +#102078 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102079 = VECTOR('',#102080,1.); +#102080 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102081 = ORIENTED_EDGE('',*,*,#102082,.F.); +#102082 = EDGE_CURVE('',#101904,#102075,#102083,.T.); +#102083 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102084,#102085), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102084 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#102085 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102086 = PLANE('',#102087); +#102087 = AXIS2_PLACEMENT_3D('',#102088,#102089,#102090); +#102088 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#102089 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102090 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102091 = ADVANCED_FACE('',(#102092),#102174,.F.); +#102092 = FACE_BOUND('',#102093,.F.); +#102093 = EDGE_LOOP('',(#102094,#102095,#102096,#102104,#102112,#102120, + #102128,#102136,#102144,#102152,#102160,#102168)); +#102094 = ORIENTED_EDGE('',*,*,#102074,.T.); +#102095 = ORIENTED_EDGE('',*,*,#101824,.T.); +#102096 = ORIENTED_EDGE('',*,*,#102097,.T.); +#102097 = EDGE_CURVE('',#101817,#102098,#102100,.T.); +#102098 = VERTEX_POINT('',#102099); +#102099 = CARTESIAN_POINT('',(-1.35,-0.325,0.775)); +#102100 = LINE('',#102101,#102102); +#102101 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#102102 = VECTOR('',#102103,1.); +#102103 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102104 = ORIENTED_EDGE('',*,*,#102105,.F.); +#102105 = EDGE_CURVE('',#102106,#102098,#102108,.T.); +#102106 = VERTEX_POINT('',#102107); +#102107 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102108 = LINE('',#102109,#102110); +#102109 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102110 = VECTOR('',#102111,1.); +#102111 = DIRECTION('',(0.,1.,0.)); +#102112 = ORIENTED_EDGE('',*,*,#102113,.F.); +#102113 = EDGE_CURVE('',#102114,#102106,#102116,.T.); +#102114 = VERTEX_POINT('',#102115); +#102115 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102116 = LINE('',#102117,#102118); +#102117 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102118 = VECTOR('',#102119,1.); +#102119 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102120 = ORIENTED_EDGE('',*,*,#102121,.F.); +#102121 = EDGE_CURVE('',#102122,#102114,#102124,.T.); +#102122 = VERTEX_POINT('',#102123); +#102123 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102124 = LINE('',#102125,#102126); +#102125 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102126 = VECTOR('',#102127,1.); +#102127 = DIRECTION('',(-1.,0.,0.)); +#102128 = ORIENTED_EDGE('',*,*,#102129,.F.); +#102129 = EDGE_CURVE('',#102130,#102122,#102132,.T.); +#102130 = VERTEX_POINT('',#102131); +#102131 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102132 = LINE('',#102133,#102134); +#102133 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102134 = VECTOR('',#102135,1.); +#102135 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102136 = ORIENTED_EDGE('',*,*,#102137,.F.); +#102137 = EDGE_CURVE('',#102138,#102130,#102140,.T.); +#102138 = VERTEX_POINT('',#102139); +#102139 = CARTESIAN_POINT('',(1.35,-0.325,0.775)); +#102140 = LINE('',#102141,#102142); +#102141 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102142 = VECTOR('',#102143,1.); +#102143 = DIRECTION('',(0.,-1.,0.)); +#102144 = ORIENTED_EDGE('',*,*,#102145,.F.); +#102145 = EDGE_CURVE('',#102146,#102138,#102148,.T.); +#102146 = VERTEX_POINT('',#102147); +#102147 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#102148 = LINE('',#102149,#102150); +#102149 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#102150 = VECTOR('',#102151,1.); +#102151 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102152 = ORIENTED_EDGE('',*,*,#102153,.T.); +#102153 = EDGE_CURVE('',#102146,#102154,#102156,.T.); +#102154 = VERTEX_POINT('',#102155); +#102155 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102156 = LINE('',#102157,#102158); +#102157 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102158 = VECTOR('',#102159,1.); +#102159 = DIRECTION('',(0.,-1.,0.)); +#102160 = ORIENTED_EDGE('',*,*,#102161,.T.); +#102161 = EDGE_CURVE('',#102154,#102162,#102164,.T.); +#102162 = VERTEX_POINT('',#102163); +#102163 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102164 = LINE('',#102165,#102166); +#102165 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102166 = VECTOR('',#102167,1.); +#102167 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102168 = ORIENTED_EDGE('',*,*,#102169,.T.); +#102169 = EDGE_CURVE('',#102162,#102075,#102170,.T.); +#102170 = LINE('',#102171,#102172); +#102171 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102172 = VECTOR('',#102173,1.); +#102173 = DIRECTION('',(-1.,0.,0.)); +#102174 = PLANE('',#102175); +#102175 = AXIS2_PLACEMENT_3D('',#102176,#102177,#102178); +#102176 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#102177 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#102178 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#102179 = ADVANCED_FACE('',(#102180),#102249,.F.); +#102180 = FACE_BOUND('',#102181,.F.); +#102181 = EDGE_LOOP('',(#102182,#102183,#102184,#102192,#102201,#102209, + #102217,#102225,#102234,#102242)); +#102182 = ORIENTED_EDGE('',*,*,#101816,.F.); +#102183 = ORIENTED_EDGE('',*,*,#101856,.T.); +#102184 = ORIENTED_EDGE('',*,*,#102185,.T.); +#102185 = EDGE_CURVE('',#101849,#102186,#102188,.T.); +#102186 = VERTEX_POINT('',#102187); +#102187 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#102188 = LINE('',#102189,#102190); +#102189 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#102190 = VECTOR('',#102191,1.); +#102191 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#102192 = ORIENTED_EDGE('',*,*,#102193,.T.); +#102193 = EDGE_CURVE('',#102186,#102194,#102196,.T.); +#102194 = VERTEX_POINT('',#102195); +#102195 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102196 = CIRCLE('',#102197,0.32); +#102197 = AXIS2_PLACEMENT_3D('',#102198,#102199,#102200); +#102198 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102199 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102200 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#102201 = ORIENTED_EDGE('',*,*,#102202,.T.); +#102202 = EDGE_CURVE('',#102194,#102203,#102205,.T.); +#102203 = VERTEX_POINT('',#102204); +#102204 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102205 = LINE('',#102206,#102207); +#102206 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102207 = VECTOR('',#102208,1.); +#102208 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#102209 = ORIENTED_EDGE('',*,*,#102210,.T.); +#102210 = EDGE_CURVE('',#102203,#102211,#102213,.T.); +#102211 = VERTEX_POINT('',#102212); +#102212 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102213 = LINE('',#102214,#102215); +#102214 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102215 = VECTOR('',#102216,1.); +#102216 = DIRECTION('',(0.,0.,1.)); +#102217 = ORIENTED_EDGE('',*,*,#102218,.T.); +#102218 = EDGE_CURVE('',#102211,#102219,#102221,.T.); +#102219 = VERTEX_POINT('',#102220); +#102220 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#102221 = LINE('',#102222,#102223); +#102222 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102223 = VECTOR('',#102224,1.); +#102224 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102225 = ORIENTED_EDGE('',*,*,#102226,.T.); +#102226 = EDGE_CURVE('',#102219,#102227,#102229,.T.); +#102227 = VERTEX_POINT('',#102228); +#102228 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102229 = CIRCLE('',#102230,0.12); +#102230 = AXIS2_PLACEMENT_3D('',#102231,#102232,#102233); +#102231 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102232 = DIRECTION('',(-1.110223024625E-16,-1.,2.0070681136E-47)); +#102233 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#102234 = ORIENTED_EDGE('',*,*,#102235,.T.); +#102235 = EDGE_CURVE('',#102227,#102236,#102238,.T.); +#102236 = VERTEX_POINT('',#102237); +#102237 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#102238 = LINE('',#102239,#102240); +#102239 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102240 = VECTOR('',#102241,1.); +#102241 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#102242 = ORIENTED_EDGE('',*,*,#102243,.T.); +#102243 = EDGE_CURVE('',#102236,#101817,#102244,.T.); +#102244 = CIRCLE('',#102245,0.32); +#102245 = AXIS2_PLACEMENT_3D('',#102246,#102247,#102248); +#102246 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#102247 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102248 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#102249 = PLANE('',#102250); +#102250 = AXIS2_PLACEMENT_3D('',#102251,#102252,#102253); +#102251 = CARTESIAN_POINT('',(-1.610729118287,-0.325,0.384660577966)); +#102252 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102253 = DIRECTION('',(0.,-0.,1.)); +#102254 = ADVANCED_FACE('',(#102255),#102273,.F.); +#102255 = FACE_BOUND('',#102256,.F.); +#102256 = EDGE_LOOP('',(#102257,#102258,#102266,#102272)); +#102257 = ORIENTED_EDGE('',*,*,#101848,.T.); +#102258 = ORIENTED_EDGE('',*,*,#102259,.T.); +#102259 = EDGE_CURVE('',#101840,#102260,#102262,.T.); +#102260 = VERTEX_POINT('',#102261); +#102261 = CARTESIAN_POINT('',(-1.523665661432,0.325,0.264432583147)); +#102262 = LINE('',#102263,#102264); +#102263 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#102264 = VECTOR('',#102265,1.); +#102265 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#102266 = ORIENTED_EDGE('',*,*,#102267,.F.); +#102267 = EDGE_CURVE('',#102186,#102260,#102268,.T.); +#102268 = LINE('',#102269,#102270); +#102269 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#102270 = VECTOR('',#102271,1.); +#102271 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102272 = ORIENTED_EDGE('',*,*,#102185,.F.); +#102273 = PLANE('',#102274); +#102274 = AXIS2_PLACEMENT_3D('',#102275,#102276,#102277); +#102275 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#102276 = DIRECTION('',(-0.989759848633,1.098854172802E-16, + 0.142742572604)); +#102277 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#102278 = ADVANCED_FACE('',(#102279),#102341,.T.); +#102279 = FACE_BOUND('',#102280,.T.); +#102280 = EDGE_LOOP('',(#102281,#102282,#102283,#102284,#102293,#102301, + #102309,#102317,#102326,#102334)); +#102281 = ORIENTED_EDGE('',*,*,#101871,.F.); +#102282 = ORIENTED_EDGE('',*,*,#101839,.T.); +#102283 = ORIENTED_EDGE('',*,*,#102259,.T.); +#102284 = ORIENTED_EDGE('',*,*,#102285,.T.); +#102285 = EDGE_CURVE('',#102260,#102286,#102288,.T.); +#102286 = VERTEX_POINT('',#102287); +#102287 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17) + ); +#102288 = CIRCLE('',#102289,0.32); +#102289 = AXIS2_PLACEMENT_3D('',#102290,#102291,#102292); +#102290 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#102291 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102292 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#102293 = ORIENTED_EDGE('',*,*,#102294,.T.); +#102294 = EDGE_CURVE('',#102286,#102295,#102297,.T.); +#102295 = VERTEX_POINT('',#102296); +#102296 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#102297 = LINE('',#102298,#102299); +#102298 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17) + ); +#102299 = VECTOR('',#102300,1.); +#102300 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#102301 = ORIENTED_EDGE('',*,*,#102302,.T.); +#102302 = EDGE_CURVE('',#102295,#102303,#102305,.T.); +#102303 = VERTEX_POINT('',#102304); +#102304 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#102305 = LINE('',#102306,#102307); +#102306 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#102307 = VECTOR('',#102308,1.); +#102308 = DIRECTION('',(0.,0.,1.)); +#102309 = ORIENTED_EDGE('',*,*,#102310,.T.); +#102310 = EDGE_CURVE('',#102303,#102311,#102313,.T.); +#102311 = VERTEX_POINT('',#102312); +#102312 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.2)); +#102313 = LINE('',#102314,#102315); +#102314 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#102315 = VECTOR('',#102316,1.); +#102316 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102317 = ORIENTED_EDGE('',*,*,#102318,.T.); +#102318 = EDGE_CURVE('',#102311,#102319,#102321,.T.); +#102319 = VERTEX_POINT('',#102320); +#102320 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#102321 = CIRCLE('',#102322,0.12); +#102322 = AXIS2_PLACEMENT_3D('',#102323,#102324,#102325); +#102323 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#102324 = DIRECTION('',(-1.110223024625E-16,-1.,2.0070681136E-47)); +#102325 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#102326 = ORIENTED_EDGE('',*,*,#102327,.T.); +#102327 = EDGE_CURVE('',#102319,#102328,#102330,.T.); +#102328 = VERTEX_POINT('',#102329); +#102329 = CARTESIAN_POINT('',(-1.690138480964,0.325,0.510567416853)); +#102330 = LINE('',#102331,#102332); +#102331 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#102332 = VECTOR('',#102333,1.); +#102333 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#102334 = ORIENTED_EDGE('',*,*,#102335,.T.); +#102335 = EDGE_CURVE('',#102328,#101872,#102336,.T.); +#102336 = CIRCLE('',#102337,0.32); +#102337 = AXIS2_PLACEMENT_3D('',#102338,#102339,#102340); +#102338 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#102339 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#102340 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#102341 = PLANE('',#102342); +#102342 = AXIS2_PLACEMENT_3D('',#102343,#102344,#102345); +#102343 = CARTESIAN_POINT('',(-1.610729118287,0.325,0.384660577966)); +#102344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102345 = DIRECTION('',(0.,-0.,1.)); +#102346 = ADVANCED_FACE('',(#102347),#102429,.F.); +#102347 = FACE_BOUND('',#102348,.F.); +#102348 = EDGE_LOOP('',(#102349,#102357,#102358,#102359,#102367,#102375, + #102383,#102391,#102399,#102407,#102415,#102423)); +#102349 = ORIENTED_EDGE('',*,*,#102350,.F.); +#102350 = EDGE_CURVE('',#101872,#102351,#102353,.T.); +#102351 = VERTEX_POINT('',#102352); +#102352 = CARTESIAN_POINT('',(-1.35,0.325,0.775)); +#102353 = LINE('',#102354,#102355); +#102354 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#102355 = VECTOR('',#102356,1.); +#102356 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102357 = ORIENTED_EDGE('',*,*,#101887,.T.); +#102358 = ORIENTED_EDGE('',*,*,#102057,.T.); +#102359 = ORIENTED_EDGE('',*,*,#102360,.T.); +#102360 = EDGE_CURVE('',#102051,#102361,#102363,.T.); +#102361 = VERTEX_POINT('',#102362); +#102362 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102363 = LINE('',#102364,#102365); +#102364 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102365 = VECTOR('',#102366,1.); +#102366 = DIRECTION('',(1.,0.,0.)); +#102367 = ORIENTED_EDGE('',*,*,#102368,.T.); +#102368 = EDGE_CURVE('',#102361,#102369,#102371,.T.); +#102369 = VERTEX_POINT('',#102370); +#102370 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102371 = LINE('',#102372,#102373); +#102372 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102373 = VECTOR('',#102374,1.); +#102374 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102375 = ORIENTED_EDGE('',*,*,#102376,.T.); +#102376 = EDGE_CURVE('',#102369,#102377,#102379,.T.); +#102377 = VERTEX_POINT('',#102378); +#102378 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102379 = LINE('',#102380,#102381); +#102380 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102381 = VECTOR('',#102382,1.); +#102382 = DIRECTION('',(0.,-1.,0.)); +#102383 = ORIENTED_EDGE('',*,*,#102384,.T.); +#102384 = EDGE_CURVE('',#102377,#102385,#102387,.T.); +#102385 = VERTEX_POINT('',#102386); +#102386 = CARTESIAN_POINT('',(1.35,0.325,0.775)); +#102387 = LINE('',#102388,#102389); +#102388 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102389 = VECTOR('',#102390,1.); +#102390 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102391 = ORIENTED_EDGE('',*,*,#102392,.F.); +#102392 = EDGE_CURVE('',#102393,#102385,#102395,.T.); +#102393 = VERTEX_POINT('',#102394); +#102394 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102395 = LINE('',#102396,#102397); +#102396 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102397 = VECTOR('',#102398,1.); +#102398 = DIRECTION('',(0.,-1.,0.)); +#102399 = ORIENTED_EDGE('',*,*,#102400,.F.); +#102400 = EDGE_CURVE('',#102401,#102393,#102403,.T.); +#102401 = VERTEX_POINT('',#102402); +#102402 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102403 = LINE('',#102404,#102405); +#102404 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102405 = VECTOR('',#102406,1.); +#102406 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102407 = ORIENTED_EDGE('',*,*,#102408,.F.); +#102408 = EDGE_CURVE('',#102409,#102401,#102411,.T.); +#102409 = VERTEX_POINT('',#102410); +#102410 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102411 = LINE('',#102412,#102413); +#102412 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102413 = VECTOR('',#102414,1.); +#102414 = DIRECTION('',(1.,0.,0.)); +#102415 = ORIENTED_EDGE('',*,*,#102416,.F.); +#102416 = EDGE_CURVE('',#102417,#102409,#102419,.T.); +#102417 = VERTEX_POINT('',#102418); +#102418 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102419 = LINE('',#102420,#102421); +#102420 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102421 = VECTOR('',#102422,1.); +#102422 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102423 = ORIENTED_EDGE('',*,*,#102424,.F.); +#102424 = EDGE_CURVE('',#102351,#102417,#102425,.T.); +#102425 = LINE('',#102426,#102427); +#102426 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102427 = VECTOR('',#102428,1.); +#102428 = DIRECTION('',(0.,1.,0.)); +#102429 = PLANE('',#102430); +#102430 = AXIS2_PLACEMENT_3D('',#102431,#102432,#102433); +#102431 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#102432 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#102433 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#102434 = ADVANCED_FACE('',(#102435),#102445,.F.); +#102435 = FACE_BOUND('',#102436,.F.); +#102436 = EDGE_LOOP('',(#102437,#102438,#102439,#102440)); +#102437 = ORIENTED_EDGE('',*,*,#101926,.T.); +#102438 = ORIENTED_EDGE('',*,*,#102082,.T.); +#102439 = ORIENTED_EDGE('',*,*,#102169,.F.); +#102440 = ORIENTED_EDGE('',*,*,#102441,.F.); +#102441 = EDGE_CURVE('',#101927,#102162,#102442,.T.); +#102442 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102443,#102444), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102443 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#102444 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102445 = PLANE('',#102446); +#102446 = AXIS2_PLACEMENT_3D('',#102447,#102448,#102449); +#102447 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#102448 = DIRECTION('',(0.,1.,0.)); +#102449 = DIRECTION('',(-1.,0.,0.)); +#102450 = ADVANCED_FACE('',(#102451),#102461,.F.); +#102451 = FACE_BOUND('',#102452,.F.); +#102452 = EDGE_LOOP('',(#102453,#102454,#102459,#102460)); +#102453 = ORIENTED_EDGE('',*,*,#101955,.T.); +#102454 = ORIENTED_EDGE('',*,*,#102455,.T.); +#102455 = EDGE_CURVE('',#101949,#102361,#102456,.T.); +#102456 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102457,#102458), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102457 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#102458 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102459 = ORIENTED_EDGE('',*,*,#102360,.F.); +#102460 = ORIENTED_EDGE('',*,*,#102050,.F.); +#102461 = PLANE('',#102462); +#102462 = AXIS2_PLACEMENT_3D('',#102463,#102464,#102465); +#102463 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#102464 = DIRECTION('',(0.,-1.,0.)); +#102465 = DIRECTION('',(1.,0.,0.)); +#102466 = ADVANCED_FACE('',(#102467),#102477,.F.); +#102467 = FACE_BOUND('',#102468,.F.); +#102468 = EDGE_LOOP('',(#102469,#102470,#102471,#102472)); +#102469 = ORIENTED_EDGE('',*,*,#101972,.T.); +#102470 = ORIENTED_EDGE('',*,*,#102441,.T.); +#102471 = ORIENTED_EDGE('',*,*,#102161,.F.); +#102472 = ORIENTED_EDGE('',*,*,#102473,.F.); +#102473 = EDGE_CURVE('',#101973,#102154,#102474,.T.); +#102474 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102475,#102476), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102475 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#102476 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102477 = PLANE('',#102478); +#102478 = AXIS2_PLACEMENT_3D('',#102479,#102480,#102481); +#102479 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#102480 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102481 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102482 = ADVANCED_FACE('',(#102483),#102493,.F.); +#102483 = FACE_BOUND('',#102484,.F.); +#102484 = EDGE_LOOP('',(#102485,#102486,#102491,#102492)); +#102485 = ORIENTED_EDGE('',*,*,#102001,.T.); +#102486 = ORIENTED_EDGE('',*,*,#102487,.T.); +#102487 = EDGE_CURVE('',#101995,#102369,#102488,.T.); +#102488 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102489,#102490), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102489 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#102490 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102491 = ORIENTED_EDGE('',*,*,#102368,.F.); +#102492 = ORIENTED_EDGE('',*,*,#102455,.F.); +#102493 = PLANE('',#102494); +#102494 = AXIS2_PLACEMENT_3D('',#102495,#102496,#102497); +#102495 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#102496 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102497 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102498 = ADVANCED_FACE('',(#102499),#102510,.F.); +#102499 = FACE_BOUND('',#102500,.F.); +#102500 = EDGE_LOOP('',(#102501,#102502,#102503,#102509)); +#102501 = ORIENTED_EDGE('',*,*,#102487,.F.); +#102502 = ORIENTED_EDGE('',*,*,#102034,.T.); +#102503 = ORIENTED_EDGE('',*,*,#102504,.T.); +#102504 = EDGE_CURVE('',#102027,#102377,#102505,.T.); +#102505 = LINE('',#102506,#102507); +#102506 = CARTESIAN_POINT('',(1.375,0.325,0.579830288983)); +#102507 = VECTOR('',#102508,1.); +#102508 = DIRECTION('',(0.,0.,1.)); +#102509 = ORIENTED_EDGE('',*,*,#102376,.F.); +#102510 = PLANE('',#102511); +#102511 = AXIS2_PLACEMENT_3D('',#102512,#102513,#102514); +#102512 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102513 = DIRECTION('',(-1.,0.,0.)); +#102514 = DIRECTION('',(0.,-1.,0.)); +#102515 = ADVANCED_FACE('',(#102516),#102543,.F.); +#102516 = FACE_BOUND('',#102517,.F.); +#102517 = EDGE_LOOP('',(#102518,#102519,#102528,#102536)); +#102518 = ORIENTED_EDGE('',*,*,#102026,.T.); +#102519 = ORIENTED_EDGE('',*,*,#102520,.T.); +#102520 = EDGE_CURVE('',#102019,#102521,#102523,.T.); +#102521 = VERTEX_POINT('',#102522); +#102522 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#102523 = CIRCLE('',#102524,0.12); +#102524 = AXIS2_PLACEMENT_3D('',#102525,#102526,#102527); +#102525 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#102526 = DIRECTION('',(2.22044604925E-16,1.,-2.007068112974E-47)); +#102527 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#102528 = ORIENTED_EDGE('',*,*,#102529,.F.); +#102529 = EDGE_CURVE('',#102530,#102521,#102532,.T.); +#102530 = VERTEX_POINT('',#102531); +#102531 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#102532 = LINE('',#102533,#102534); +#102533 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#102534 = VECTOR('',#102535,1.); +#102535 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102536 = ORIENTED_EDGE('',*,*,#102537,.F.); +#102537 = EDGE_CURVE('',#102027,#102530,#102538,.T.); +#102538 = CIRCLE('',#102539,0.12); +#102539 = AXIS2_PLACEMENT_3D('',#102540,#102541,#102542); +#102540 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#102541 = DIRECTION('',(2.22044604925E-16,1.,-2.007068112974E-47)); +#102542 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#102543 = CYLINDRICAL_SURFACE('',#102544,0.12); +#102544 = AXIS2_PLACEMENT_3D('',#102545,#102546,#102547); +#102545 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#102546 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#102547 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#102548 = ADVANCED_FACE('',(#102549),#102560,.F.); +#102549 = FACE_BOUND('',#102550,.F.); +#102550 = EDGE_LOOP('',(#102551,#102557,#102558,#102559)); +#102551 = ORIENTED_EDGE('',*,*,#102552,.F.); +#102552 = EDGE_CURVE('',#102019,#102146,#102553,.T.); +#102553 = LINE('',#102554,#102555); +#102554 = CARTESIAN_POINT('',(1.375,-0.325,0.579830288983)); +#102555 = VECTOR('',#102556,1.); +#102556 = DIRECTION('',(0.,0.,1.)); +#102557 = ORIENTED_EDGE('',*,*,#102018,.T.); +#102558 = ORIENTED_EDGE('',*,*,#102473,.T.); +#102559 = ORIENTED_EDGE('',*,*,#102153,.F.); +#102560 = PLANE('',#102561); +#102561 = AXIS2_PLACEMENT_3D('',#102562,#102563,#102564); +#102562 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#102563 = DIRECTION('',(-1.,0.,0.)); +#102564 = DIRECTION('',(0.,-1.,0.)); +#102565 = ADVANCED_FACE('',(#102566),#102582,.F.); +#102566 = FACE_BOUND('',#102567,.F.); +#102567 = EDGE_LOOP('',(#102568,#102569,#102575,#102576)); +#102568 = ORIENTED_EDGE('',*,*,#102384,.F.); +#102569 = ORIENTED_EDGE('',*,*,#102570,.T.); +#102570 = EDGE_CURVE('',#102377,#102146,#102571,.T.); +#102571 = LINE('',#102572,#102573); +#102572 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102573 = VECTOR('',#102574,1.); +#102574 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102575 = ORIENTED_EDGE('',*,*,#102145,.T.); +#102576 = ORIENTED_EDGE('',*,*,#102577,.F.); +#102577 = EDGE_CURVE('',#102385,#102138,#102578,.T.); +#102578 = LINE('',#102579,#102580); +#102579 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102580 = VECTOR('',#102581,1.); +#102581 = DIRECTION('',(0.,-1.,0.)); +#102582 = PLANE('',#102583); +#102583 = AXIS2_PLACEMENT_3D('',#102584,#102585,#102586); +#102584 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#102585 = DIRECTION('',(0.,0.,-1.)); +#102586 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102587 = ADVANCED_FACE('',(#102588),#102613,.F.); +#102588 = FACE_BOUND('',#102589,.F.); +#102589 = EDGE_LOOP('',(#102590,#102591,#102592,#102593,#102600,#102608) + ); +#102590 = ORIENTED_EDGE('',*,*,#102392,.T.); +#102591 = ORIENTED_EDGE('',*,*,#102577,.T.); +#102592 = ORIENTED_EDGE('',*,*,#102137,.T.); +#102593 = ORIENTED_EDGE('',*,*,#102594,.T.); +#102594 = EDGE_CURVE('',#102130,#102595,#102597,.T.); +#102595 = VERTEX_POINT('',#102596); +#102596 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102597 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102598,#102599), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102598 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102599 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102600 = ORIENTED_EDGE('',*,*,#102601,.F.); +#102601 = EDGE_CURVE('',#102602,#102595,#102604,.T.); +#102602 = VERTEX_POINT('',#102603); +#102603 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102604 = LINE('',#102605,#102606); +#102605 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102606 = VECTOR('',#102607,1.); +#102607 = DIRECTION('',(0.,-1.,0.)); +#102608 = ORIENTED_EDGE('',*,*,#102609,.F.); +#102609 = EDGE_CURVE('',#102393,#102602,#102610,.T.); +#102610 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102611,#102612), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102611 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102612 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102613 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102614,#102615) + ,(#102616,#102617 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102614 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102615 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102616 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102617 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102618 = ADVANCED_FACE('',(#102619),#102636,.F.); +#102619 = FACE_BOUND('',#102620,.F.); +#102620 = EDGE_LOOP('',(#102621,#102622,#102629,#102635)); +#102621 = ORIENTED_EDGE('',*,*,#102129,.T.); +#102622 = ORIENTED_EDGE('',*,*,#102623,.T.); +#102623 = EDGE_CURVE('',#102122,#102624,#102626,.T.); +#102624 = VERTEX_POINT('',#102625); +#102625 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102626 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102627,#102628), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102627 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102628 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102629 = ORIENTED_EDGE('',*,*,#102630,.F.); +#102630 = EDGE_CURVE('',#102595,#102624,#102631,.T.); +#102631 = LINE('',#102632,#102633); +#102632 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102633 = VECTOR('',#102634,1.); +#102634 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#102635 = ORIENTED_EDGE('',*,*,#102594,.F.); +#102636 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102637,#102638) + ,(#102639,#102640 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102637 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#102638 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#102639 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102640 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102641 = ADVANCED_FACE('',(#102642),#102659,.F.); +#102642 = FACE_BOUND('',#102643,.F.); +#102643 = EDGE_LOOP('',(#102644,#102645,#102652,#102658)); +#102644 = ORIENTED_EDGE('',*,*,#102121,.T.); +#102645 = ORIENTED_EDGE('',*,*,#102646,.T.); +#102646 = EDGE_CURVE('',#102114,#102647,#102649,.T.); +#102647 = VERTEX_POINT('',#102648); +#102648 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102649 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102650,#102651), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102650 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102651 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102652 = ORIENTED_EDGE('',*,*,#102653,.F.); +#102653 = EDGE_CURVE('',#102624,#102647,#102654,.T.); +#102654 = LINE('',#102655,#102656); +#102655 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102656 = VECTOR('',#102657,1.); +#102657 = DIRECTION('',(-1.,0.,0.)); +#102658 = ORIENTED_EDGE('',*,*,#102623,.F.); +#102659 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102660,#102661) + ,(#102662,#102663 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102660 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#102661 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#102662 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102663 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102664 = ADVANCED_FACE('',(#102665),#102682,.F.); +#102665 = FACE_BOUND('',#102666,.F.); +#102666 = EDGE_LOOP('',(#102667,#102668,#102675,#102681)); +#102667 = ORIENTED_EDGE('',*,*,#102113,.T.); +#102668 = ORIENTED_EDGE('',*,*,#102669,.T.); +#102669 = EDGE_CURVE('',#102106,#102670,#102672,.T.); +#102670 = VERTEX_POINT('',#102671); +#102671 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102672 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102673,#102674), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102673 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102674 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102675 = ORIENTED_EDGE('',*,*,#102676,.F.); +#102676 = EDGE_CURVE('',#102647,#102670,#102677,.T.); +#102677 = LINE('',#102678,#102679); +#102678 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102679 = VECTOR('',#102680,1.); +#102680 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#102681 = ORIENTED_EDGE('',*,*,#102646,.F.); +#102682 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102683,#102684) + ,(#102685,#102686 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102683 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#102684 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#102685 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102686 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102687 = ADVANCED_FACE('',(#102688),#102712,.F.); +#102688 = FACE_BOUND('',#102689,.F.); +#102689 = EDGE_LOOP('',(#102690,#102691,#102697,#102698,#102705,#102711) + ); +#102690 = ORIENTED_EDGE('',*,*,#102105,.T.); +#102691 = ORIENTED_EDGE('',*,*,#102692,.T.); +#102692 = EDGE_CURVE('',#102098,#102351,#102693,.T.); +#102693 = LINE('',#102694,#102695); +#102694 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102695 = VECTOR('',#102696,1.); +#102696 = DIRECTION('',(0.,1.,0.)); +#102697 = ORIENTED_EDGE('',*,*,#102424,.T.); +#102698 = ORIENTED_EDGE('',*,*,#102699,.T.); +#102699 = EDGE_CURVE('',#102417,#102700,#102702,.T.); +#102700 = VERTEX_POINT('',#102701); +#102701 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102702 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102703,#102704), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102703 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102704 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102705 = ORIENTED_EDGE('',*,*,#102706,.F.); +#102706 = EDGE_CURVE('',#102670,#102700,#102707,.T.); +#102707 = LINE('',#102708,#102709); +#102708 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102709 = VECTOR('',#102710,1.); +#102710 = DIRECTION('',(0.,1.,0.)); +#102711 = ORIENTED_EDGE('',*,*,#102669,.F.); +#102712 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102713,#102714) + ,(#102715,#102716 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102713 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#102714 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#102715 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102716 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102717 = ADVANCED_FACE('',(#102718),#102729,.F.); +#102718 = FACE_BOUND('',#102719,.F.); +#102719 = EDGE_LOOP('',(#102720,#102721,#102727,#102728)); +#102720 = ORIENTED_EDGE('',*,*,#102097,.F.); +#102721 = ORIENTED_EDGE('',*,*,#102722,.T.); +#102722 = EDGE_CURVE('',#101817,#101872,#102723,.T.); +#102723 = LINE('',#102724,#102725); +#102724 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#102725 = VECTOR('',#102726,1.); +#102726 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102727 = ORIENTED_EDGE('',*,*,#102350,.T.); +#102728 = ORIENTED_EDGE('',*,*,#102692,.F.); +#102729 = PLANE('',#102730); +#102730 = AXIS2_PLACEMENT_3D('',#102731,#102732,#102733); +#102731 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#102732 = DIRECTION('',(0.,0.,-1.)); +#102733 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102734 = ADVANCED_FACE('',(#102735),#102746,.T.); +#102735 = FACE_BOUND('',#102736,.T.); +#102736 = EDGE_LOOP('',(#102737,#102738,#102739,#102740)); +#102737 = ORIENTED_EDGE('',*,*,#102243,.T.); +#102738 = ORIENTED_EDGE('',*,*,#102722,.T.); +#102739 = ORIENTED_EDGE('',*,*,#102335,.F.); +#102740 = ORIENTED_EDGE('',*,*,#102741,.F.); +#102741 = EDGE_CURVE('',#102236,#102328,#102742,.T.); +#102742 = LINE('',#102743,#102744); +#102743 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#102744 = VECTOR('',#102745,1.); +#102745 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102746 = CYLINDRICAL_SURFACE('',#102747,0.32); +#102747 = AXIS2_PLACEMENT_3D('',#102748,#102749,#102750); +#102748 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#102749 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#102750 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#102751 = ADVANCED_FACE('',(#102752),#102763,.F.); +#102752 = FACE_BOUND('',#102753,.F.); +#102753 = EDGE_LOOP('',(#102754,#102760,#102761,#102762)); +#102754 = ORIENTED_EDGE('',*,*,#102755,.T.); +#102755 = EDGE_CURVE('',#102227,#102319,#102756,.T.); +#102756 = LINE('',#102757,#102758); +#102757 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102758 = VECTOR('',#102759,1.); +#102759 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102760 = ORIENTED_EDGE('',*,*,#102327,.T.); +#102761 = ORIENTED_EDGE('',*,*,#102741,.F.); +#102762 = ORIENTED_EDGE('',*,*,#102235,.F.); +#102763 = PLANE('',#102764); +#102764 = AXIS2_PLACEMENT_3D('',#102765,#102766,#102767); +#102765 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#102766 = DIRECTION('',(0.989759848633,-1.098854172802E-16, + -0.142742572604)); +#102767 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#102768 = ADVANCED_FACE('',(#102769),#102780,.F.); +#102769 = FACE_BOUND('',#102770,.F.); +#102770 = EDGE_LOOP('',(#102771,#102777,#102778,#102779)); +#102771 = ORIENTED_EDGE('',*,*,#102772,.T.); +#102772 = EDGE_CURVE('',#102219,#102311,#102773,.T.); +#102773 = LINE('',#102774,#102775); +#102774 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#102775 = VECTOR('',#102776,1.); +#102776 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102777 = ORIENTED_EDGE('',*,*,#102318,.T.); +#102778 = ORIENTED_EDGE('',*,*,#102755,.F.); +#102779 = ORIENTED_EDGE('',*,*,#102226,.F.); +#102780 = CYLINDRICAL_SURFACE('',#102781,0.12); +#102781 = AXIS2_PLACEMENT_3D('',#102782,#102783,#102784); +#102782 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102783 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#102784 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#102785 = ADVANCED_FACE('',(#102786),#102797,.F.); +#102786 = FACE_BOUND('',#102787,.F.); +#102787 = EDGE_LOOP('',(#102788,#102794,#102795,#102796)); +#102788 = ORIENTED_EDGE('',*,*,#102789,.T.); +#102789 = EDGE_CURVE('',#102211,#102303,#102790,.T.); +#102790 = LINE('',#102791,#102792); +#102791 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102792 = VECTOR('',#102793,1.); +#102793 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102794 = ORIENTED_EDGE('',*,*,#102310,.T.); +#102795 = ORIENTED_EDGE('',*,*,#102772,.F.); +#102796 = ORIENTED_EDGE('',*,*,#102218,.F.); +#102797 = PLANE('',#102798); +#102798 = AXIS2_PLACEMENT_3D('',#102799,#102800,#102801); +#102799 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#102800 = DIRECTION('',(0.,0.,-1.)); +#102801 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102802 = ADVANCED_FACE('',(#102803),#102814,.F.); +#102803 = FACE_BOUND('',#102804,.F.); +#102804 = EDGE_LOOP('',(#102805,#102811,#102812,#102813)); +#102805 = ORIENTED_EDGE('',*,*,#102806,.T.); +#102806 = EDGE_CURVE('',#102203,#102295,#102807,.T.); +#102807 = LINE('',#102808,#102809); +#102808 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102809 = VECTOR('',#102810,1.); +#102810 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102811 = ORIENTED_EDGE('',*,*,#102302,.T.); +#102812 = ORIENTED_EDGE('',*,*,#102789,.F.); +#102813 = ORIENTED_EDGE('',*,*,#102210,.F.); +#102814 = PLANE('',#102815); +#102815 = AXIS2_PLACEMENT_3D('',#102816,#102817,#102818); +#102816 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#102817 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#102818 = DIRECTION('',(0.,0.,1.)); +#102819 = ADVANCED_FACE('',(#102820),#102831,.F.); +#102820 = FACE_BOUND('',#102821,.F.); +#102821 = EDGE_LOOP('',(#102822,#102828,#102829,#102830)); +#102822 = ORIENTED_EDGE('',*,*,#102823,.T.); +#102823 = EDGE_CURVE('',#102194,#102286,#102824,.T.); +#102824 = LINE('',#102825,#102826); +#102825 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102826 = VECTOR('',#102827,1.); +#102827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#102828 = ORIENTED_EDGE('',*,*,#102294,.T.); +#102829 = ORIENTED_EDGE('',*,*,#102806,.F.); +#102830 = ORIENTED_EDGE('',*,*,#102202,.F.); +#102831 = PLANE('',#102832); +#102832 = AXIS2_PLACEMENT_3D('',#102833,#102834,#102835); +#102833 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#102834 = DIRECTION('',(0.,0.,1.)); +#102835 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#102836 = ADVANCED_FACE('',(#102837),#102843,.T.); +#102837 = FACE_BOUND('',#102838,.T.); +#102838 = EDGE_LOOP('',(#102839,#102840,#102841,#102842)); +#102839 = ORIENTED_EDGE('',*,*,#102193,.T.); +#102840 = ORIENTED_EDGE('',*,*,#102823,.T.); +#102841 = ORIENTED_EDGE('',*,*,#102285,.F.); +#102842 = ORIENTED_EDGE('',*,*,#102267,.F.); +#102843 = CYLINDRICAL_SURFACE('',#102844,0.32); +#102844 = AXIS2_PLACEMENT_3D('',#102845,#102846,#102847); +#102845 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#102846 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#102847 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#102848 = ADVANCED_FACE('',(#102849),#102866,.F.); +#102849 = FACE_BOUND('',#102850,.F.); +#102850 = EDGE_LOOP('',(#102851,#102852,#102859,#102865)); +#102851 = ORIENTED_EDGE('',*,*,#102416,.T.); +#102852 = ORIENTED_EDGE('',*,*,#102853,.T.); +#102853 = EDGE_CURVE('',#102409,#102854,#102856,.T.); +#102854 = VERTEX_POINT('',#102855); +#102855 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102856 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102857,#102858), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102857 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102858 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102859 = ORIENTED_EDGE('',*,*,#102860,.F.); +#102860 = EDGE_CURVE('',#102700,#102854,#102861,.T.); +#102861 = LINE('',#102862,#102863); +#102862 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102863 = VECTOR('',#102864,1.); +#102864 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#102865 = ORIENTED_EDGE('',*,*,#102699,.F.); +#102866 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102867,#102868) + ,(#102869,#102870 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102867 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#102868 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#102869 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102870 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102871 = ADVANCED_FACE('',(#102872),#102889,.F.); +#102872 = FACE_BOUND('',#102873,.F.); +#102873 = EDGE_LOOP('',(#102874,#102875,#102882,#102888)); +#102874 = ORIENTED_EDGE('',*,*,#102408,.T.); +#102875 = ORIENTED_EDGE('',*,*,#102876,.T.); +#102876 = EDGE_CURVE('',#102401,#102877,#102879,.T.); +#102877 = VERTEX_POINT('',#102878); +#102878 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102879 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#102880,#102881), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#102880 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102881 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102882 = ORIENTED_EDGE('',*,*,#102883,.F.); +#102883 = EDGE_CURVE('',#102854,#102877,#102884,.T.); +#102884 = LINE('',#102885,#102886); +#102885 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102886 = VECTOR('',#102887,1.); +#102887 = DIRECTION('',(1.,0.,0.)); +#102888 = ORIENTED_EDGE('',*,*,#102853,.F.); +#102889 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102890,#102891) + ,(#102892,#102893 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102890 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#102891 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#102892 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102893 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102894 = ADVANCED_FACE('',(#102895),#102906,.F.); +#102895 = FACE_BOUND('',#102896,.F.); +#102896 = EDGE_LOOP('',(#102897,#102898,#102899,#102905)); +#102897 = ORIENTED_EDGE('',*,*,#102400,.T.); +#102898 = ORIENTED_EDGE('',*,*,#102609,.T.); +#102899 = ORIENTED_EDGE('',*,*,#102900,.F.); +#102900 = EDGE_CURVE('',#102877,#102602,#102901,.T.); +#102901 = LINE('',#102902,#102903); +#102902 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102903 = VECTOR('',#102904,1.); +#102904 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#102905 = ORIENTED_EDGE('',*,*,#102876,.F.); +#102906 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#102907,#102908) + ,(#102909,#102910 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#102907 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#102908 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#102909 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#102910 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#102911 = ADVANCED_FACE('',(#102912),#102981,.F.); +#102912 = FACE_BOUND('',#102913,.F.); +#102913 = EDGE_LOOP('',(#102914,#102915,#102916,#102924,#102933,#102941, + #102949,#102957,#102966,#102974)); +#102914 = ORIENTED_EDGE('',*,*,#102504,.F.); +#102915 = ORIENTED_EDGE('',*,*,#102537,.T.); +#102916 = ORIENTED_EDGE('',*,*,#102917,.T.); +#102917 = EDGE_CURVE('',#102530,#102918,#102920,.T.); +#102918 = VERTEX_POINT('',#102919); +#102919 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#102920 = LINE('',#102921,#102922); +#102921 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#102922 = VECTOR('',#102923,1.); +#102923 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#102924 = ORIENTED_EDGE('',*,*,#102925,.T.); +#102925 = EDGE_CURVE('',#102918,#102926,#102928,.T.); +#102926 = VERTEX_POINT('',#102927); +#102927 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#102928 = CIRCLE('',#102929,0.32); +#102929 = AXIS2_PLACEMENT_3D('',#102930,#102931,#102932); +#102930 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#102931 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#102932 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#102933 = ORIENTED_EDGE('',*,*,#102934,.T.); +#102934 = EDGE_CURVE('',#102926,#102935,#102937,.T.); +#102935 = VERTEX_POINT('',#102936); +#102936 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#102937 = LINE('',#102938,#102939); +#102938 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#102939 = VECTOR('',#102940,1.); +#102940 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#102941 = ORIENTED_EDGE('',*,*,#102942,.T.); +#102942 = EDGE_CURVE('',#102935,#102943,#102945,.T.); +#102943 = VERTEX_POINT('',#102944); +#102944 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#102945 = LINE('',#102946,#102947); +#102946 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#102947 = VECTOR('',#102948,1.); +#102948 = DIRECTION('',(0.,0.,1.)); +#102949 = ORIENTED_EDGE('',*,*,#102950,.T.); +#102950 = EDGE_CURVE('',#102943,#102951,#102953,.T.); +#102951 = VERTEX_POINT('',#102952); +#102952 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#102953 = LINE('',#102954,#102955); +#102954 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#102955 = VECTOR('',#102956,1.); +#102956 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#102957 = ORIENTED_EDGE('',*,*,#102958,.T.); +#102958 = EDGE_CURVE('',#102951,#102959,#102961,.T.); +#102959 = VERTEX_POINT('',#102960); +#102960 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#102961 = CIRCLE('',#102962,0.12); +#102962 = AXIS2_PLACEMENT_3D('',#102963,#102964,#102965); +#102963 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#102964 = DIRECTION('',(2.22044604925E-16,1.,4.0141362272E-47)); +#102965 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#102966 = ORIENTED_EDGE('',*,*,#102967,.T.); +#102967 = EDGE_CURVE('',#102959,#102968,#102970,.T.); +#102968 = VERTEX_POINT('',#102969); +#102969 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#102970 = LINE('',#102971,#102972); +#102971 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#102972 = VECTOR('',#102973,1.); +#102973 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#102974 = ORIENTED_EDGE('',*,*,#102975,.T.); +#102975 = EDGE_CURVE('',#102968,#102377,#102976,.T.); +#102976 = CIRCLE('',#102977,0.32); +#102977 = AXIS2_PLACEMENT_3D('',#102978,#102979,#102980); +#102978 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#102979 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#102980 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#102981 = PLANE('',#102982); +#102982 = AXIS2_PLACEMENT_3D('',#102983,#102984,#102985); +#102983 = CARTESIAN_POINT('',(1.610729118287,0.325,0.384660577966)); +#102984 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#102985 = DIRECTION('',(0.,0.,1.)); +#102986 = ADVANCED_FACE('',(#102987),#103005,.F.); +#102987 = FACE_BOUND('',#102988,.F.); +#102988 = EDGE_LOOP('',(#102989,#102990,#102998,#103004)); +#102989 = ORIENTED_EDGE('',*,*,#102529,.T.); +#102990 = ORIENTED_EDGE('',*,*,#102991,.T.); +#102991 = EDGE_CURVE('',#102521,#102992,#102994,.T.); +#102992 = VERTEX_POINT('',#102993); +#102993 = CARTESIAN_POINT('',(1.523665661432,-0.325,0.264432583147)); +#102994 = LINE('',#102995,#102996); +#102995 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#102996 = VECTOR('',#102997,1.); +#102997 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#102998 = ORIENTED_EDGE('',*,*,#102999,.F.); +#102999 = EDGE_CURVE('',#102918,#102992,#103000,.T.); +#103000 = LINE('',#103001,#103002); +#103001 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#103002 = VECTOR('',#103003,1.); +#103003 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103004 = ORIENTED_EDGE('',*,*,#102917,.F.); +#103005 = PLANE('',#103006); +#103006 = AXIS2_PLACEMENT_3D('',#103007,#103008,#103009); +#103007 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#103008 = DIRECTION('',(0.989759848633,-2.197708345604E-16, + 0.142742572604)); +#103009 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#103010 = ADVANCED_FACE('',(#103011),#103073,.T.); +#103011 = FACE_BOUND('',#103012,.T.); +#103012 = EDGE_LOOP('',(#103013,#103014,#103015,#103016,#103025,#103033, + #103041,#103049,#103058,#103066)); +#103013 = ORIENTED_EDGE('',*,*,#102552,.F.); +#103014 = ORIENTED_EDGE('',*,*,#102520,.T.); +#103015 = ORIENTED_EDGE('',*,*,#102991,.T.); +#103016 = ORIENTED_EDGE('',*,*,#103017,.T.); +#103017 = EDGE_CURVE('',#102992,#103018,#103020,.T.); +#103018 = VERTEX_POINT('',#103019); +#103019 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17) + ); +#103020 = CIRCLE('',#103021,0.32); +#103021 = AXIS2_PLACEMENT_3D('',#103022,#103023,#103024); +#103022 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#103023 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#103024 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#103025 = ORIENTED_EDGE('',*,*,#103026,.T.); +#103026 = EDGE_CURVE('',#103018,#103027,#103029,.T.); +#103027 = VERTEX_POINT('',#103028); +#103028 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#103029 = LINE('',#103030,#103031); +#103030 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17) + ); +#103031 = VECTOR('',#103032,1.); +#103032 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#103033 = ORIENTED_EDGE('',*,*,#103034,.T.); +#103034 = EDGE_CURVE('',#103027,#103035,#103037,.T.); +#103035 = VERTEX_POINT('',#103036); +#103036 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#103037 = LINE('',#103038,#103039); +#103038 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#103039 = VECTOR('',#103040,1.); +#103040 = DIRECTION('',(0.,0.,1.)); +#103041 = ORIENTED_EDGE('',*,*,#103042,.T.); +#103042 = EDGE_CURVE('',#103035,#103043,#103045,.T.); +#103043 = VERTEX_POINT('',#103044); +#103044 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.2)); +#103045 = LINE('',#103046,#103047); +#103046 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#103047 = VECTOR('',#103048,1.); +#103048 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#103049 = ORIENTED_EDGE('',*,*,#103050,.T.); +#103050 = EDGE_CURVE('',#103043,#103051,#103053,.T.); +#103051 = VERTEX_POINT('',#103052); +#103052 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#103053 = CIRCLE('',#103054,0.12); +#103054 = AXIS2_PLACEMENT_3D('',#103055,#103056,#103057); +#103055 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#103056 = DIRECTION('',(2.22044604925E-16,1.,4.0141362272E-47)); +#103057 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#103058 = ORIENTED_EDGE('',*,*,#103059,.T.); +#103059 = EDGE_CURVE('',#103051,#103060,#103062,.T.); +#103060 = VERTEX_POINT('',#103061); +#103061 = CARTESIAN_POINT('',(1.690138480964,-0.325,0.510567416853)); +#103062 = LINE('',#103063,#103064); +#103063 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#103064 = VECTOR('',#103065,1.); +#103065 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#103066 = ORIENTED_EDGE('',*,*,#103067,.T.); +#103067 = EDGE_CURVE('',#103060,#102146,#103068,.T.); +#103068 = CIRCLE('',#103069,0.32); +#103069 = AXIS2_PLACEMENT_3D('',#103070,#103071,#103072); +#103070 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#103071 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#103072 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#103073 = PLANE('',#103074); +#103074 = AXIS2_PLACEMENT_3D('',#103075,#103076,#103077); +#103075 = CARTESIAN_POINT('',(1.610729118287,-0.325,0.384660577966)); +#103076 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103077 = DIRECTION('',(0.,0.,1.)); +#103078 = ADVANCED_FACE('',(#103079),#103090,.T.); +#103079 = FACE_BOUND('',#103080,.T.); +#103080 = EDGE_LOOP('',(#103081,#103082,#103083,#103084)); +#103081 = ORIENTED_EDGE('',*,*,#102975,.T.); +#103082 = ORIENTED_EDGE('',*,*,#102570,.T.); +#103083 = ORIENTED_EDGE('',*,*,#103067,.F.); +#103084 = ORIENTED_EDGE('',*,*,#103085,.F.); +#103085 = EDGE_CURVE('',#102968,#103060,#103086,.T.); +#103086 = LINE('',#103087,#103088); +#103087 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#103088 = VECTOR('',#103089,1.); +#103089 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103090 = CYLINDRICAL_SURFACE('',#103091,0.32); +#103091 = AXIS2_PLACEMENT_3D('',#103092,#103093,#103094); +#103092 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#103093 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#103094 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#103095 = ADVANCED_FACE('',(#103096,#103106),#103140,.T.); +#103096 = FACE_BOUND('',#103097,.T.); +#103097 = EDGE_LOOP('',(#103098,#103099,#103100,#103101,#103102,#103103, + #103104,#103105)); +#103098 = ORIENTED_EDGE('',*,*,#102706,.F.); +#103099 = ORIENTED_EDGE('',*,*,#102676,.F.); +#103100 = ORIENTED_EDGE('',*,*,#102653,.F.); +#103101 = ORIENTED_EDGE('',*,*,#102630,.F.); +#103102 = ORIENTED_EDGE('',*,*,#102601,.F.); +#103103 = ORIENTED_EDGE('',*,*,#102900,.F.); +#103104 = ORIENTED_EDGE('',*,*,#102883,.F.); +#103105 = ORIENTED_EDGE('',*,*,#102860,.F.); +#103106 = FACE_BOUND('',#103107,.T.); +#103107 = EDGE_LOOP('',(#103108,#103118,#103126,#103134)); +#103108 = ORIENTED_EDGE('',*,*,#103109,.T.); +#103109 = EDGE_CURVE('',#103110,#103112,#103114,.T.); +#103110 = VERTEX_POINT('',#103111); +#103111 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.25)); +#103112 = VERTEX_POINT('',#103113); +#103113 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.25)); +#103114 = LINE('',#103115,#103116); +#103115 = CARTESIAN_POINT('',(-1.233243103516,-0.608243103516,1.25)); +#103116 = VECTOR('',#103117,1.); +#103117 = DIRECTION('',(-1.,0.,0.)); +#103118 = ORIENTED_EDGE('',*,*,#103119,.T.); +#103119 = EDGE_CURVE('',#103112,#103120,#103122,.T.); +#103120 = VERTEX_POINT('',#103121); +#103121 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.25)); +#103122 = LINE('',#103123,#103124); +#103123 = CARTESIAN_POINT('',(-1.183243103516,-0.633682327637,1.25)); +#103124 = VECTOR('',#103125,1.); +#103125 = DIRECTION('',(0.,1.,0.)); +#103126 = ORIENTED_EDGE('',*,*,#103127,.F.); +#103127 = EDGE_CURVE('',#103128,#103120,#103130,.T.); +#103128 = VERTEX_POINT('',#103129); +#103129 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.25)); +#103130 = LINE('',#103131,#103132); +#103131 = CARTESIAN_POINT('',(-1.233243103516,0.608243103516,1.25)); +#103132 = VECTOR('',#103133,1.); +#103133 = DIRECTION('',(-1.,0.,0.)); +#103134 = ORIENTED_EDGE('',*,*,#103135,.F.); +#103135 = EDGE_CURVE('',#103110,#103128,#103136,.T.); +#103136 = LINE('',#103137,#103138); +#103137 = CARTESIAN_POINT('',(-0.683243103516,-0.633682327637,1.25)); +#103138 = VECTOR('',#103139,1.); +#103139 = DIRECTION('',(0.,1.,0.)); +#103140 = PLANE('',#103141); +#103141 = AXIS2_PLACEMENT_3D('',#103142,#103143,#103144); +#103142 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#103143 = DIRECTION('',(0.,0.,1.)); +#103144 = DIRECTION('',(0.889522261294,0.456891832562,-0.)); +#103145 = ADVANCED_FACE('',(#103146),#103157,.F.); +#103146 = FACE_BOUND('',#103147,.F.); +#103147 = EDGE_LOOP('',(#103148,#103154,#103155,#103156)); +#103148 = ORIENTED_EDGE('',*,*,#103149,.T.); +#103149 = EDGE_CURVE('',#102959,#103051,#103150,.T.); +#103150 = LINE('',#103151,#103152); +#103151 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#103152 = VECTOR('',#103153,1.); +#103153 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103154 = ORIENTED_EDGE('',*,*,#103059,.T.); +#103155 = ORIENTED_EDGE('',*,*,#103085,.F.); +#103156 = ORIENTED_EDGE('',*,*,#102967,.F.); +#103157 = PLANE('',#103158); +#103158 = AXIS2_PLACEMENT_3D('',#103159,#103160,#103161); +#103159 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#103160 = DIRECTION('',(-0.989759848633,2.197708345604E-16, + -0.142742572604)); +#103161 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#103162 = ADVANCED_FACE('',(#103163),#103174,.F.); +#103163 = FACE_BOUND('',#103164,.F.); +#103164 = EDGE_LOOP('',(#103165,#103171,#103172,#103173)); +#103165 = ORIENTED_EDGE('',*,*,#103166,.T.); +#103166 = EDGE_CURVE('',#102951,#103043,#103167,.T.); +#103167 = LINE('',#103168,#103169); +#103168 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#103169 = VECTOR('',#103170,1.); +#103170 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103171 = ORIENTED_EDGE('',*,*,#103050,.T.); +#103172 = ORIENTED_EDGE('',*,*,#103149,.F.); +#103173 = ORIENTED_EDGE('',*,*,#102958,.F.); +#103174 = CYLINDRICAL_SURFACE('',#103175,0.12); +#103175 = AXIS2_PLACEMENT_3D('',#103176,#103177,#103178); +#103176 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#103177 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#103178 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#103179 = ADVANCED_FACE('',(#103180),#103191,.F.); +#103180 = FACE_BOUND('',#103181,.F.); +#103181 = EDGE_LOOP('',(#103182,#103188,#103189,#103190)); +#103182 = ORIENTED_EDGE('',*,*,#103183,.T.); +#103183 = EDGE_CURVE('',#102943,#103035,#103184,.T.); +#103184 = LINE('',#103185,#103186); +#103185 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#103186 = VECTOR('',#103187,1.); +#103187 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103188 = ORIENTED_EDGE('',*,*,#103042,.T.); +#103189 = ORIENTED_EDGE('',*,*,#103166,.F.); +#103190 = ORIENTED_EDGE('',*,*,#102950,.F.); +#103191 = PLANE('',#103192); +#103192 = AXIS2_PLACEMENT_3D('',#103193,#103194,#103195); +#103193 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#103194 = DIRECTION('',(0.,0.,-1.)); +#103195 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#103196 = ADVANCED_FACE('',(#103197),#103208,.F.); +#103197 = FACE_BOUND('',#103198,.F.); +#103198 = EDGE_LOOP('',(#103199,#103205,#103206,#103207)); +#103199 = ORIENTED_EDGE('',*,*,#103200,.T.); +#103200 = EDGE_CURVE('',#102935,#103027,#103201,.T.); +#103201 = LINE('',#103202,#103203); +#103202 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#103203 = VECTOR('',#103204,1.); +#103204 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103205 = ORIENTED_EDGE('',*,*,#103034,.T.); +#103206 = ORIENTED_EDGE('',*,*,#103183,.F.); +#103207 = ORIENTED_EDGE('',*,*,#102942,.F.); +#103208 = PLANE('',#103209); +#103209 = AXIS2_PLACEMENT_3D('',#103210,#103211,#103212); +#103210 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#103211 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#103212 = DIRECTION('',(0.,0.,1.)); +#103213 = ADVANCED_FACE('',(#103214),#103225,.F.); +#103214 = FACE_BOUND('',#103215,.F.); +#103215 = EDGE_LOOP('',(#103216,#103222,#103223,#103224)); +#103216 = ORIENTED_EDGE('',*,*,#103217,.T.); +#103217 = EDGE_CURVE('',#102926,#103018,#103218,.T.); +#103218 = LINE('',#103219,#103220); +#103219 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#103220 = VECTOR('',#103221,1.); +#103221 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#103222 = ORIENTED_EDGE('',*,*,#103026,.T.); +#103223 = ORIENTED_EDGE('',*,*,#103200,.F.); +#103224 = ORIENTED_EDGE('',*,*,#102934,.F.); +#103225 = PLANE('',#103226); +#103226 = AXIS2_PLACEMENT_3D('',#103227,#103228,#103229); +#103227 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#103228 = DIRECTION('',(0.,0.,1.)); +#103229 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#103230 = ADVANCED_FACE('',(#103231),#103237,.T.); +#103231 = FACE_BOUND('',#103232,.T.); +#103232 = EDGE_LOOP('',(#103233,#103234,#103235,#103236)); +#103233 = ORIENTED_EDGE('',*,*,#102925,.T.); +#103234 = ORIENTED_EDGE('',*,*,#103217,.T.); +#103235 = ORIENTED_EDGE('',*,*,#103017,.F.); +#103236 = ORIENTED_EDGE('',*,*,#102999,.F.); +#103237 = CYLINDRICAL_SURFACE('',#103238,0.32); +#103238 = AXIS2_PLACEMENT_3D('',#103239,#103240,#103241); +#103239 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#103240 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#103241 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#103242 = ADVANCED_FACE('',(#103243),#103268,.F.); +#103243 = FACE_BOUND('',#103244,.F.); +#103244 = EDGE_LOOP('',(#103245,#103246,#103254,#103262)); +#103245 = ORIENTED_EDGE('',*,*,#103109,.T.); +#103246 = ORIENTED_EDGE('',*,*,#103247,.T.); +#103247 = EDGE_CURVE('',#103112,#103248,#103250,.T.); +#103248 = VERTEX_POINT('',#103249); +#103249 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103250 = LINE('',#103251,#103252); +#103251 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#103252 = VECTOR('',#103253,1.); +#103253 = DIRECTION('',(0.,0.,1.)); +#103254 = ORIENTED_EDGE('',*,*,#103255,.T.); +#103255 = EDGE_CURVE('',#103248,#103256,#103258,.T.); +#103256 = VERTEX_POINT('',#103257); +#103257 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#103258 = LINE('',#103259,#103260); +#103259 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103260 = VECTOR('',#103261,1.); +#103261 = DIRECTION('',(1.,0.,0.)); +#103262 = ORIENTED_EDGE('',*,*,#103263,.F.); +#103263 = EDGE_CURVE('',#103110,#103256,#103264,.T.); +#103264 = LINE('',#103265,#103266); +#103265 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#103266 = VECTOR('',#103267,1.); +#103267 = DIRECTION('',(0.,0.,1.)); +#103268 = PLANE('',#103269); +#103269 = AXIS2_PLACEMENT_3D('',#103270,#103271,#103272); +#103270 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#103271 = DIRECTION('',(0.,1.,0.)); +#103272 = DIRECTION('',(0.,-0.,1.)); +#103273 = ADVANCED_FACE('',(#103274),#103292,.T.); +#103274 = FACE_BOUND('',#103275,.T.); +#103275 = EDGE_LOOP('',(#103276,#103277,#103278,#103286)); +#103276 = ORIENTED_EDGE('',*,*,#103263,.F.); +#103277 = ORIENTED_EDGE('',*,*,#103135,.T.); +#103278 = ORIENTED_EDGE('',*,*,#103279,.T.); +#103279 = EDGE_CURVE('',#103128,#103280,#103282,.T.); +#103280 = VERTEX_POINT('',#103281); +#103281 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.26)); +#103282 = LINE('',#103283,#103284); +#103283 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.24)); +#103284 = VECTOR('',#103285,1.); +#103285 = DIRECTION('',(0.,0.,1.)); +#103286 = ORIENTED_EDGE('',*,*,#103287,.F.); +#103287 = EDGE_CURVE('',#103256,#103280,#103288,.T.); +#103288 = LINE('',#103289,#103290); +#103289 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#103290 = VECTOR('',#103291,1.); +#103291 = DIRECTION('',(0.,1.,0.)); +#103292 = PLANE('',#103293); +#103293 = AXIS2_PLACEMENT_3D('',#103294,#103295,#103296); +#103294 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#103295 = DIRECTION('',(1.,0.,0.)); +#103296 = DIRECTION('',(0.,0.,1.)); +#103297 = ADVANCED_FACE('',(#103298),#103316,.T.); +#103298 = FACE_BOUND('',#103299,.T.); +#103299 = EDGE_LOOP('',(#103300,#103301,#103309,#103315)); +#103300 = ORIENTED_EDGE('',*,*,#103127,.T.); +#103301 = ORIENTED_EDGE('',*,*,#103302,.T.); +#103302 = EDGE_CURVE('',#103120,#103303,#103305,.T.); +#103303 = VERTEX_POINT('',#103304); +#103304 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#103305 = LINE('',#103306,#103307); +#103306 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#103307 = VECTOR('',#103308,1.); +#103308 = DIRECTION('',(0.,0.,1.)); +#103309 = ORIENTED_EDGE('',*,*,#103310,.T.); +#103310 = EDGE_CURVE('',#103303,#103280,#103311,.T.); +#103311 = LINE('',#103312,#103313); +#103312 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#103313 = VECTOR('',#103314,1.); +#103314 = DIRECTION('',(1.,0.,0.)); +#103315 = ORIENTED_EDGE('',*,*,#103279,.F.); +#103316 = PLANE('',#103317); +#103317 = AXIS2_PLACEMENT_3D('',#103318,#103319,#103320); +#103318 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#103319 = DIRECTION('',(0.,1.,0.)); +#103320 = DIRECTION('',(0.,-0.,1.)); +#103321 = ADVANCED_FACE('',(#103322),#103333,.F.); +#103322 = FACE_BOUND('',#103323,.F.); +#103323 = EDGE_LOOP('',(#103324,#103325,#103326,#103327)); +#103324 = ORIENTED_EDGE('',*,*,#103247,.F.); +#103325 = ORIENTED_EDGE('',*,*,#103119,.T.); +#103326 = ORIENTED_EDGE('',*,*,#103302,.T.); +#103327 = ORIENTED_EDGE('',*,*,#103328,.F.); +#103328 = EDGE_CURVE('',#103248,#103303,#103329,.T.); +#103329 = LINE('',#103330,#103331); +#103330 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103331 = VECTOR('',#103332,1.); +#103332 = DIRECTION('',(0.,1.,0.)); +#103333 = PLANE('',#103334); +#103334 = AXIS2_PLACEMENT_3D('',#103335,#103336,#103337); +#103335 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#103336 = DIRECTION('',(1.,0.,0.)); +#103337 = DIRECTION('',(0.,0.,1.)); +#103338 = ADVANCED_FACE('',(#103339),#103345,.T.); +#103339 = FACE_BOUND('',#103340,.T.); +#103340 = EDGE_LOOP('',(#103341,#103342,#103343,#103344)); +#103341 = ORIENTED_EDGE('',*,*,#103328,.F.); +#103342 = ORIENTED_EDGE('',*,*,#103255,.T.); +#103343 = ORIENTED_EDGE('',*,*,#103287,.T.); +#103344 = ORIENTED_EDGE('',*,*,#103310,.F.); +#103345 = PLANE('',#103346); +#103346 = AXIS2_PLACEMENT_3D('',#103347,#103348,#103349); +#103347 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#103348 = DIRECTION('',(0.,0.,1.)); +#103349 = DIRECTION('',(1.,0.,-0.)); +#103350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#103354)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#103351,#103352,#103353)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#103351 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#103352 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#103353 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#103354 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#103351, + 'distance_accuracy_value','confusion accuracy'); +#103355 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103356,#103358); +#103356 = ( REPRESENTATION_RELATIONSHIP('','',#101661,#101638) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103357) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103357 = ITEM_DEFINED_TRANSFORMATION('','',#11,#101639); +#103358 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103359); +#103359 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('132','=>[0:1:1:62]','',#101633 + ,#101656,$); +#103360 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#101658)); +#103361 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103362,#103364); +#103362 = ( REPRESENTATION_RELATIONSHIP('','',#65643,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103363) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103363 = ITEM_DEFINED_TRANSFORMATION('','',#11,#411); +#103364 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103365); +#103365 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('134','C33','',#5,#65638,$); +#103366 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103367,#103369); +#103367 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103368) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103368 = ITEM_DEFINED_TRANSFORMATION('','',#11,#415); +#103369 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103370); +#103370 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('135','Rfreq','',#5,#523,$); +#103371 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103372,#103374); +#103372 = ( REPRESENTATION_RELATIONSHIP('','',#6178,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103373) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103373 = ITEM_DEFINED_TRANSFORMATION('','',#11,#419); +#103374 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103375); +#103375 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('136','P3','',#5,#6173,$); +#103376 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103377,#103379); +#103377 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103378) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103378 = ITEM_DEFINED_TRANSFORMATION('','',#11,#423); +#103379 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103380); +#103380 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('137','Rig','',#5,#523,$); +#103381 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103382,#103384); +#103382 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103383) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103383 = ITEM_DEFINED_TRANSFORMATION('','',#11,#427); +#103384 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103385); +#103385 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('138','RB1','',#5,#523,$); +#103386 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103387,#103389); +#103387 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103388) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103388 = ITEM_DEFINED_TRANSFORMATION('','',#11,#431); +#103389 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103390); +#103390 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('139','Ren1','',#5,#523,$); +#103391 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103392,#103394); +#103392 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103393) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103393 = ITEM_DEFINED_TRANSFORMATION('','',#11,#435); +#103394 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103395); +#103395 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('140','C5','',#5,#14742,$); +#103396 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103397,#103399); +#103397 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103398) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103398 = ITEM_DEFINED_TRANSFORMATION('','',#11,#439); +#103399 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103400); +#103400 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('141','R8','',#5,#523,$); +#103401 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103402,#103404); +#103402 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103403) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103403 = ITEM_DEFINED_TRANSFORMATION('','',#11,#443); +#103404 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103405); +#103405 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('142','C24','',#5,#14742,$); +#103406 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103407,#103409); +#103407 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103408) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103408 = ITEM_DEFINED_TRANSFORMATION('','',#11,#447); +#103409 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103410); +#103410 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('143','R54','',#5,#523,$); +#103411 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103412,#103414); +#103412 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103413) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103413 = ITEM_DEFINED_TRANSFORMATION('','',#11,#451); +#103414 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103415); +#103415 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('144','R57','',#5,#523,$); +#103416 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103417,#103419); +#103417 = ( REPRESENTATION_RELATIONSHIP('','',#528,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103418) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103418 = ITEM_DEFINED_TRANSFORMATION('','',#11,#455); +#103419 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103420); +#103420 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('145','R50','',#5,#523,$); +#103421 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103422,#103424); +#103422 = ( REPRESENTATION_RELATIONSHIP('','',#4928,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103423) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103423 = ITEM_DEFINED_TRANSFORMATION('','',#11,#459); +#103424 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103425); +#103425 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('146','Dbk2','',#5,#4923,$); +#103426 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103427,#103429); +#103427 = ( REPRESENTATION_RELATIONSHIP('','',#14747,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103428) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103428 = ITEM_DEFINED_TRANSFORMATION('','',#11,#463); +#103429 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103430); +#103430 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('147','Cu4','',#5,#14742,$); +#103431 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103432,#103434); +#103432 = ( REPRESENTATION_RELATIONSHIP('','',#42700,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103433) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103433 = ITEM_DEFINED_TRANSFORMATION('','',#11,#467); +#103434 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103435); +#103435 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('148','C23','',#5,#42695,$); +#103436 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103437,#103439); +#103437 = ( REPRESENTATION_RELATIONSHIP('','',#101638,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103438) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103438 = ITEM_DEFINED_TRANSFORMATION('','',#11,#471); +#103439 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103440); +#103440 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('149','D6','',#5,#101633,$); +#103441 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103442,#103444); +#103442 = ( REPRESENTATION_RELATIONSHIP('','',#10420,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103443) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103443 = ITEM_DEFINED_TRANSFORMATION('','',#11,#475); +#103444 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103445); +#103445 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('150','D4G','',#5,#10415,$); +#103446 = SHAPE_DEFINITION_REPRESENTATION(#103447,#103453); +#103447 = PRODUCT_DEFINITION_SHAPE('','',#103448); +#103448 = PRODUCT_DEFINITION('design','',#103449,#103452); +#103449 = PRODUCT_DEFINITION_FORMATION('','',#103450); +#103450 = PRODUCT('PinSocket_1x08_P2.54mm_Vertical', + 'PinSocket_1x08_P2.54mm_Vertical','',(#103451)); +#103451 = PRODUCT_CONTEXT('',#2,'mechanical'); +#103452 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#103453 = SHAPE_REPRESENTATION('',(#11,#103454),#103458); +#103454 = AXIS2_PLACEMENT_3D('',#103455,#103456,#103457); +#103455 = CARTESIAN_POINT('',(0.,0.,0.)); +#103456 = DIRECTION('',(0.,0.,1.)); +#103457 = DIRECTION('',(1.,0.,-0.)); +#103458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#103462)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#103459,#103460,#103461)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#103459 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#103460 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#103461 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#103462 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#103459, + 'distance_accuracy_value','confusion accuracy'); +#103463 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#103464,#103466); +#103464 = ( REPRESENTATION_RELATIONSHIP('','',#103453,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#103465) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#103465 = ITEM_DEFINED_TRANSFORMATION('','',#11,#479); +#103466 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #103467); +#103467 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('152','MOD1','',#5,#103448,$); +#103468 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#103450)); +#103469 = SHAPE_DEFINITION_REPRESENTATION(#103470,#103476); +#103470 = PRODUCT_DEFINITION_SHAPE('','',#103471); +#103471 = PRODUCT_DEFINITION('design','',#103472,#103475); +#103472 = PRODUCT_DEFINITION_FORMATION('','',#103473); +#103473 = PRODUCT('PinSocket_1x08_P2.54mm_Vertical', + 'PinSocket_1x08_P2.54mm_Vertical','',(#103474)); +#103474 = PRODUCT_CONTEXT('',#2,'mechanical'); +#103475 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#103476 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#103477),#109967); +#103477 = MANIFOLD_SOLID_BREP('',#103478); +#103478 = CLOSED_SHELL('',(#103479,#103519,#103582,#103645,#103662, + #103951,#103973,#103990,#104535,#104547,#104559,#104590,#104614, + #104638,#104655,#104686,#104710,#104734,#104751,#104782,#104806, + #104830,#104847,#104878,#104902,#104926,#104943,#104974,#104998, + #105022,#105039,#105070,#105094,#105118,#105135,#105166,#105190, + #105214,#105231,#105262,#105286,#105310,#105327,#105344,#105391, + #105408,#105455,#105472,#105519,#105536,#105583,#105600,#105647, + #105664,#105711,#105728,#105775,#105792,#105839,#105856,#105903, + #105920,#105967,#105984,#106031,#106048,#106095,#106112,#106159, + #106176,#106223,#106240,#106287,#106304,#106351,#106382,#106438, + #106462,#106511,#106542,#106598,#106622,#106671,#106702,#106758, + #106782,#106831,#106862,#106918,#106942,#106991,#107022,#107078, + #107102,#107151,#107182,#107238,#107262,#107311,#107342,#107398, + #107422,#107471,#107502,#107558,#107582,#107631,#107648,#107665, + #107682,#107699,#107711,#107728,#107745,#107762,#107779,#107791, + #107808,#107825,#107842,#107859,#107871,#107888,#107905,#107922, + #107939,#107951,#107968,#107985,#108002,#108019,#108031,#108048, + #108065,#108082,#108099,#108111,#108128,#108145,#108162,#108179, + #108191,#108208,#108225,#108242,#108259,#108271,#108288,#108305, + #108354,#108378,#108420,#108437,#108454,#108471,#108520,#108544, + #108586,#108603,#108620,#108637,#108686,#108710,#108752,#108769, + #108786,#108803,#108852,#108876,#108918,#108935,#108952,#108969, + #109018,#109042,#109084,#109101,#109118,#109135,#109184,#109208, + #109250,#109267,#109284,#109301,#109350,#109374,#109416,#109433, + #109450,#109467,#109516,#109540,#109582,#109599,#109616,#109633, + #109645,#109662,#109679,#109691,#109708,#109725,#109737,#109754, + #109771,#109783,#109800,#109817,#109829,#109846,#109863,#109875, + #109892,#109909,#109921,#109938,#109955)); +#103479 = ADVANCED_FACE('',(#103480),#103514,.F.); +#103480 = FACE_BOUND('',#103481,.F.); +#103481 = EDGE_LOOP('',(#103482,#103492,#103500,#103508)); +#103482 = ORIENTED_EDGE('',*,*,#103483,.T.); +#103483 = EDGE_CURVE('',#103484,#103486,#103488,.T.); +#103484 = VERTEX_POINT('',#103485); +#103485 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103486 = VERTEX_POINT('',#103487); +#103487 = CARTESIAN_POINT('',(1.27,-19.05,8.5)); +#103488 = LINE('',#103489,#103490); +#103489 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103490 = VECTOR('',#103491,1.); +#103491 = DIRECTION('',(0.,0.,1.)); +#103492 = ORIENTED_EDGE('',*,*,#103493,.T.); +#103493 = EDGE_CURVE('',#103486,#103494,#103496,.T.); +#103494 = VERTEX_POINT('',#103495); +#103495 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#103496 = LINE('',#103497,#103498); +#103497 = CARTESIAN_POINT('',(1.27,-19.05,8.5)); +#103498 = VECTOR('',#103499,1.); +#103499 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103500 = ORIENTED_EDGE('',*,*,#103501,.F.); +#103501 = EDGE_CURVE('',#103502,#103494,#103504,.T.); +#103502 = VERTEX_POINT('',#103503); +#103503 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103504 = LINE('',#103505,#103506); +#103505 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103506 = VECTOR('',#103507,1.); +#103507 = DIRECTION('',(0.,0.,1.)); +#103508 = ORIENTED_EDGE('',*,*,#103509,.F.); +#103509 = EDGE_CURVE('',#103484,#103502,#103510,.T.); +#103510 = LINE('',#103511,#103512); +#103511 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103512 = VECTOR('',#103513,1.); +#103513 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103514 = PLANE('',#103515); +#103515 = AXIS2_PLACEMENT_3D('',#103516,#103517,#103518); +#103516 = CARTESIAN_POINT('',(1.27,-19.05,0.)); +#103517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103518 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103519 = ADVANCED_FACE('',(#103520),#103577,.F.); +#103520 = FACE_BOUND('',#103521,.F.); +#103521 = EDGE_LOOP('',(#103522,#103532,#103540,#103546,#103547,#103555, + #103563,#103571)); +#103522 = ORIENTED_EDGE('',*,*,#103523,.F.); +#103523 = EDGE_CURVE('',#103524,#103526,#103528,.T.); +#103524 = VERTEX_POINT('',#103525); +#103525 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103526 = VERTEX_POINT('',#103527); +#103527 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.)); +#103528 = LINE('',#103529,#103530); +#103529 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103530 = VECTOR('',#103531,1.); +#103531 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103532 = ORIENTED_EDGE('',*,*,#103533,.T.); +#103533 = EDGE_CURVE('',#103524,#103534,#103536,.T.); +#103534 = VERTEX_POINT('',#103535); +#103535 = CARTESIAN_POINT('',(-1.27,-19.05,8.5)); +#103536 = LINE('',#103537,#103538); +#103537 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103538 = VECTOR('',#103539,1.); +#103539 = DIRECTION('',(0.,0.,1.)); +#103540 = ORIENTED_EDGE('',*,*,#103541,.T.); +#103541 = EDGE_CURVE('',#103534,#103486,#103542,.T.); +#103542 = LINE('',#103543,#103544); +#103543 = CARTESIAN_POINT('',(-1.27,-19.05,8.5)); +#103544 = VECTOR('',#103545,1.); +#103545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103546 = ORIENTED_EDGE('',*,*,#103483,.F.); +#103547 = ORIENTED_EDGE('',*,*,#103548,.F.); +#103548 = EDGE_CURVE('',#103549,#103484,#103551,.T.); +#103549 = VERTEX_POINT('',#103550); +#103550 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#103551 = LINE('',#103552,#103553); +#103552 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103553 = VECTOR('',#103554,1.); +#103554 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103555 = ORIENTED_EDGE('',*,*,#103556,.T.); +#103556 = EDGE_CURVE('',#103549,#103557,#103559,.T.); +#103557 = VERTEX_POINT('',#103558); +#103558 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.2)); +#103559 = LINE('',#103560,#103561); +#103560 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#103561 = VECTOR('',#103562,1.); +#103562 = DIRECTION('',(0.,0.,1.)); +#103563 = ORIENTED_EDGE('',*,*,#103564,.F.); +#103564 = EDGE_CURVE('',#103565,#103557,#103567,.T.); +#103565 = VERTEX_POINT('',#103566); +#103566 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.2)); +#103567 = LINE('',#103568,#103569); +#103568 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.2)); +#103569 = VECTOR('',#103570,1.); +#103570 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103571 = ORIENTED_EDGE('',*,*,#103572,.F.); +#103572 = EDGE_CURVE('',#103526,#103565,#103573,.T.); +#103573 = LINE('',#103574,#103575); +#103574 = CARTESIAN_POINT('',(-0.846666666667,-19.05,0.)); +#103575 = VECTOR('',#103576,1.); +#103576 = DIRECTION('',(0.,0.,1.)); +#103577 = PLANE('',#103578); +#103578 = AXIS2_PLACEMENT_3D('',#103579,#103580,#103581); +#103579 = CARTESIAN_POINT('',(-1.27,-19.05,0.)); +#103580 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103581 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103582 = ADVANCED_FACE('',(#103583),#103640,.F.); +#103583 = FACE_BOUND('',#103584,.F.); +#103584 = EDGE_LOOP('',(#103585,#103593,#103594,#103602,#103610,#103618, + #103626,#103634)); +#103585 = ORIENTED_EDGE('',*,*,#103586,.F.); +#103586 = EDGE_CURVE('',#103502,#103587,#103589,.T.); +#103587 = VERTEX_POINT('',#103588); +#103588 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#103589 = LINE('',#103590,#103591); +#103590 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103591 = VECTOR('',#103592,1.); +#103592 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103593 = ORIENTED_EDGE('',*,*,#103501,.T.); +#103594 = ORIENTED_EDGE('',*,*,#103595,.T.); +#103595 = EDGE_CURVE('',#103494,#103596,#103598,.T.); +#103596 = VERTEX_POINT('',#103597); +#103597 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#103598 = LINE('',#103599,#103600); +#103599 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#103600 = VECTOR('',#103601,1.); +#103601 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103602 = ORIENTED_EDGE('',*,*,#103603,.F.); +#103603 = EDGE_CURVE('',#103604,#103596,#103606,.T.); +#103604 = VERTEX_POINT('',#103605); +#103605 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#103606 = LINE('',#103607,#103608); +#103607 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#103608 = VECTOR('',#103609,1.); +#103609 = DIRECTION('',(0.,0.,1.)); +#103610 = ORIENTED_EDGE('',*,*,#103611,.F.); +#103611 = EDGE_CURVE('',#103612,#103604,#103614,.T.); +#103612 = VERTEX_POINT('',#103613); +#103613 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103614 = LINE('',#103615,#103616); +#103615 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103616 = VECTOR('',#103617,1.); +#103617 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103618 = ORIENTED_EDGE('',*,*,#103619,.T.); +#103619 = EDGE_CURVE('',#103612,#103620,#103622,.T.); +#103620 = VERTEX_POINT('',#103621); +#103621 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#103622 = LINE('',#103623,#103624); +#103623 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103624 = VECTOR('',#103625,1.); +#103625 = DIRECTION('',(0.,0.,1.)); +#103626 = ORIENTED_EDGE('',*,*,#103627,.F.); +#103627 = EDGE_CURVE('',#103628,#103620,#103630,.T.); +#103628 = VERTEX_POINT('',#103629); +#103629 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#103630 = LINE('',#103631,#103632); +#103631 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#103632 = VECTOR('',#103633,1.); +#103633 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103634 = ORIENTED_EDGE('',*,*,#103635,.F.); +#103635 = EDGE_CURVE('',#103587,#103628,#103636,.T.); +#103636 = LINE('',#103637,#103638); +#103637 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#103638 = VECTOR('',#103639,1.); +#103639 = DIRECTION('',(0.,0.,1.)); +#103640 = PLANE('',#103641); +#103641 = AXIS2_PLACEMENT_3D('',#103642,#103643,#103644); +#103642 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#103643 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103644 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103645 = ADVANCED_FACE('',(#103646),#103657,.F.); +#103646 = FACE_BOUND('',#103647,.F.); +#103647 = EDGE_LOOP('',(#103648,#103649,#103650,#103651)); +#103648 = ORIENTED_EDGE('',*,*,#103548,.T.); +#103649 = ORIENTED_EDGE('',*,*,#103509,.T.); +#103650 = ORIENTED_EDGE('',*,*,#103586,.T.); +#103651 = ORIENTED_EDGE('',*,*,#103652,.F.); +#103652 = EDGE_CURVE('',#103549,#103587,#103653,.T.); +#103653 = LINE('',#103654,#103655); +#103654 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#103655 = VECTOR('',#103656,1.); +#103656 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103657 = PLANE('',#103658); +#103658 = AXIS2_PLACEMENT_3D('',#103659,#103660,#103661); +#103659 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,0.)); +#103660 = DIRECTION('',(0.,0.,1.)); +#103661 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#103662 = ADVANCED_FACE('',(#103663,#103674,#103708,#103742,#103776, + #103810,#103844,#103878,#103912),#103946,.T.); +#103663 = FACE_BOUND('',#103664,.T.); +#103664 = EDGE_LOOP('',(#103665,#103666,#103667,#103673)); +#103665 = ORIENTED_EDGE('',*,*,#103493,.T.); +#103666 = ORIENTED_EDGE('',*,*,#103595,.T.); +#103667 = ORIENTED_EDGE('',*,*,#103668,.T.); +#103668 = EDGE_CURVE('',#103596,#103534,#103669,.T.); +#103669 = LINE('',#103670,#103671); +#103670 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#103671 = VECTOR('',#103672,1.); +#103672 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103673 = ORIENTED_EDGE('',*,*,#103541,.T.); +#103674 = FACE_BOUND('',#103675,.T.); +#103675 = EDGE_LOOP('',(#103676,#103686,#103694,#103702)); +#103676 = ORIENTED_EDGE('',*,*,#103677,.F.); +#103677 = EDGE_CURVE('',#103678,#103680,#103682,.T.); +#103678 = VERTEX_POINT('',#103679); +#103679 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#103680 = VERTEX_POINT('',#103681); +#103681 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#103682 = LINE('',#103683,#103684); +#103683 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#103684 = VECTOR('',#103685,1.); +#103685 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103686 = ORIENTED_EDGE('',*,*,#103687,.F.); +#103687 = EDGE_CURVE('',#103688,#103678,#103690,.T.); +#103688 = VERTEX_POINT('',#103689); +#103689 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#103690 = LINE('',#103691,#103692); +#103691 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#103692 = VECTOR('',#103693,1.); +#103693 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103694 = ORIENTED_EDGE('',*,*,#103695,.F.); +#103695 = EDGE_CURVE('',#103696,#103688,#103698,.T.); +#103696 = VERTEX_POINT('',#103697); +#103697 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#103698 = LINE('',#103699,#103700); +#103699 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#103700 = VECTOR('',#103701,1.); +#103701 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103702 = ORIENTED_EDGE('',*,*,#103703,.F.); +#103703 = EDGE_CURVE('',#103680,#103696,#103704,.T.); +#103704 = LINE('',#103705,#103706); +#103705 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#103706 = VECTOR('',#103707,1.); +#103707 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103708 = FACE_BOUND('',#103709,.T.); +#103709 = EDGE_LOOP('',(#103710,#103720,#103728,#103736)); +#103710 = ORIENTED_EDGE('',*,*,#103711,.F.); +#103711 = EDGE_CURVE('',#103712,#103714,#103716,.T.); +#103712 = VERTEX_POINT('',#103713); +#103713 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#103714 = VERTEX_POINT('',#103715); +#103715 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#103716 = LINE('',#103717,#103718); +#103717 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#103718 = VECTOR('',#103719,1.); +#103719 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103720 = ORIENTED_EDGE('',*,*,#103721,.F.); +#103721 = EDGE_CURVE('',#103722,#103712,#103724,.T.); +#103722 = VERTEX_POINT('',#103723); +#103723 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#103724 = LINE('',#103725,#103726); +#103725 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#103726 = VECTOR('',#103727,1.); +#103727 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103728 = ORIENTED_EDGE('',*,*,#103729,.F.); +#103729 = EDGE_CURVE('',#103730,#103722,#103732,.T.); +#103730 = VERTEX_POINT('',#103731); +#103731 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#103732 = LINE('',#103733,#103734); +#103733 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#103734 = VECTOR('',#103735,1.); +#103735 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103736 = ORIENTED_EDGE('',*,*,#103737,.F.); +#103737 = EDGE_CURVE('',#103714,#103730,#103738,.T.); +#103738 = LINE('',#103739,#103740); +#103739 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#103740 = VECTOR('',#103741,1.); +#103741 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103742 = FACE_BOUND('',#103743,.T.); +#103743 = EDGE_LOOP('',(#103744,#103754,#103762,#103770)); +#103744 = ORIENTED_EDGE('',*,*,#103745,.F.); +#103745 = EDGE_CURVE('',#103746,#103748,#103750,.T.); +#103746 = VERTEX_POINT('',#103747); +#103747 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#103748 = VERTEX_POINT('',#103749); +#103749 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#103750 = LINE('',#103751,#103752); +#103751 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#103752 = VECTOR('',#103753,1.); +#103753 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103754 = ORIENTED_EDGE('',*,*,#103755,.F.); +#103755 = EDGE_CURVE('',#103756,#103746,#103758,.T.); +#103756 = VERTEX_POINT('',#103757); +#103757 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#103758 = LINE('',#103759,#103760); +#103759 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#103760 = VECTOR('',#103761,1.); +#103761 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103762 = ORIENTED_EDGE('',*,*,#103763,.F.); +#103763 = EDGE_CURVE('',#103764,#103756,#103766,.T.); +#103764 = VERTEX_POINT('',#103765); +#103765 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#103766 = LINE('',#103767,#103768); +#103767 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#103768 = VECTOR('',#103769,1.); +#103769 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103770 = ORIENTED_EDGE('',*,*,#103771,.F.); +#103771 = EDGE_CURVE('',#103748,#103764,#103772,.T.); +#103772 = LINE('',#103773,#103774); +#103773 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#103774 = VECTOR('',#103775,1.); +#103775 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103776 = FACE_BOUND('',#103777,.T.); +#103777 = EDGE_LOOP('',(#103778,#103788,#103796,#103804)); +#103778 = ORIENTED_EDGE('',*,*,#103779,.F.); +#103779 = EDGE_CURVE('',#103780,#103782,#103784,.T.); +#103780 = VERTEX_POINT('',#103781); +#103781 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#103782 = VERTEX_POINT('',#103783); +#103783 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#103784 = LINE('',#103785,#103786); +#103785 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#103786 = VECTOR('',#103787,1.); +#103787 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103788 = ORIENTED_EDGE('',*,*,#103789,.F.); +#103789 = EDGE_CURVE('',#103790,#103780,#103792,.T.); +#103790 = VERTEX_POINT('',#103791); +#103791 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#103792 = LINE('',#103793,#103794); +#103793 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#103794 = VECTOR('',#103795,1.); +#103795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103796 = ORIENTED_EDGE('',*,*,#103797,.F.); +#103797 = EDGE_CURVE('',#103798,#103790,#103800,.T.); +#103798 = VERTEX_POINT('',#103799); +#103799 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#103800 = LINE('',#103801,#103802); +#103801 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#103802 = VECTOR('',#103803,1.); +#103803 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103804 = ORIENTED_EDGE('',*,*,#103805,.F.); +#103805 = EDGE_CURVE('',#103782,#103798,#103806,.T.); +#103806 = LINE('',#103807,#103808); +#103807 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#103808 = VECTOR('',#103809,1.); +#103809 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103810 = FACE_BOUND('',#103811,.T.); +#103811 = EDGE_LOOP('',(#103812,#103822,#103830,#103838)); +#103812 = ORIENTED_EDGE('',*,*,#103813,.F.); +#103813 = EDGE_CURVE('',#103814,#103816,#103818,.T.); +#103814 = VERTEX_POINT('',#103815); +#103815 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#103816 = VERTEX_POINT('',#103817); +#103817 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#103818 = LINE('',#103819,#103820); +#103819 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#103820 = VECTOR('',#103821,1.); +#103821 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103822 = ORIENTED_EDGE('',*,*,#103823,.F.); +#103823 = EDGE_CURVE('',#103824,#103814,#103826,.T.); +#103824 = VERTEX_POINT('',#103825); +#103825 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#103826 = LINE('',#103827,#103828); +#103827 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#103828 = VECTOR('',#103829,1.); +#103829 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103830 = ORIENTED_EDGE('',*,*,#103831,.F.); +#103831 = EDGE_CURVE('',#103832,#103824,#103834,.T.); +#103832 = VERTEX_POINT('',#103833); +#103833 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#103834 = LINE('',#103835,#103836); +#103835 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#103836 = VECTOR('',#103837,1.); +#103837 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103838 = ORIENTED_EDGE('',*,*,#103839,.F.); +#103839 = EDGE_CURVE('',#103816,#103832,#103840,.T.); +#103840 = LINE('',#103841,#103842); +#103841 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#103842 = VECTOR('',#103843,1.); +#103843 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103844 = FACE_BOUND('',#103845,.T.); +#103845 = EDGE_LOOP('',(#103846,#103856,#103864,#103872)); +#103846 = ORIENTED_EDGE('',*,*,#103847,.F.); +#103847 = EDGE_CURVE('',#103848,#103850,#103852,.T.); +#103848 = VERTEX_POINT('',#103849); +#103849 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#103850 = VERTEX_POINT('',#103851); +#103851 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#103852 = LINE('',#103853,#103854); +#103853 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#103854 = VECTOR('',#103855,1.); +#103855 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103856 = ORIENTED_EDGE('',*,*,#103857,.F.); +#103857 = EDGE_CURVE('',#103858,#103848,#103860,.T.); +#103858 = VERTEX_POINT('',#103859); +#103859 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#103860 = LINE('',#103861,#103862); +#103861 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#103862 = VECTOR('',#103863,1.); +#103863 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103864 = ORIENTED_EDGE('',*,*,#103865,.F.); +#103865 = EDGE_CURVE('',#103866,#103858,#103868,.T.); +#103866 = VERTEX_POINT('',#103867); +#103867 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#103868 = LINE('',#103869,#103870); +#103869 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#103870 = VECTOR('',#103871,1.); +#103871 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103872 = ORIENTED_EDGE('',*,*,#103873,.F.); +#103873 = EDGE_CURVE('',#103850,#103866,#103874,.T.); +#103874 = LINE('',#103875,#103876); +#103875 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#103876 = VECTOR('',#103877,1.); +#103877 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103878 = FACE_BOUND('',#103879,.T.); +#103879 = EDGE_LOOP('',(#103880,#103890,#103898,#103906)); +#103880 = ORIENTED_EDGE('',*,*,#103881,.F.); +#103881 = EDGE_CURVE('',#103882,#103884,#103886,.T.); +#103882 = VERTEX_POINT('',#103883); +#103883 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#103884 = VERTEX_POINT('',#103885); +#103885 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#103886 = LINE('',#103887,#103888); +#103887 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#103888 = VECTOR('',#103889,1.); +#103889 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103890 = ORIENTED_EDGE('',*,*,#103891,.F.); +#103891 = EDGE_CURVE('',#103892,#103882,#103894,.T.); +#103892 = VERTEX_POINT('',#103893); +#103893 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#103894 = LINE('',#103895,#103896); +#103895 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#103896 = VECTOR('',#103897,1.); +#103897 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103898 = ORIENTED_EDGE('',*,*,#103899,.F.); +#103899 = EDGE_CURVE('',#103900,#103892,#103902,.T.); +#103900 = VERTEX_POINT('',#103901); +#103901 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#103902 = LINE('',#103903,#103904); +#103903 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#103904 = VECTOR('',#103905,1.); +#103905 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103906 = ORIENTED_EDGE('',*,*,#103907,.F.); +#103907 = EDGE_CURVE('',#103884,#103900,#103908,.T.); +#103908 = LINE('',#103909,#103910); +#103909 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#103910 = VECTOR('',#103911,1.); +#103911 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103912 = FACE_BOUND('',#103913,.T.); +#103913 = EDGE_LOOP('',(#103914,#103924,#103932,#103940)); +#103914 = ORIENTED_EDGE('',*,*,#103915,.F.); +#103915 = EDGE_CURVE('',#103916,#103918,#103920,.T.); +#103916 = VERTEX_POINT('',#103917); +#103917 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#103918 = VERTEX_POINT('',#103919); +#103919 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#103920 = LINE('',#103921,#103922); +#103921 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#103922 = VECTOR('',#103923,1.); +#103923 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103924 = ORIENTED_EDGE('',*,*,#103925,.F.); +#103925 = EDGE_CURVE('',#103926,#103916,#103928,.T.); +#103926 = VERTEX_POINT('',#103927); +#103927 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#103928 = LINE('',#103929,#103930); +#103929 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#103930 = VECTOR('',#103931,1.); +#103931 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103932 = ORIENTED_EDGE('',*,*,#103933,.F.); +#103933 = EDGE_CURVE('',#103934,#103926,#103936,.T.); +#103934 = VERTEX_POINT('',#103935); +#103935 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#103936 = LINE('',#103937,#103938); +#103937 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#103938 = VECTOR('',#103939,1.); +#103939 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103940 = ORIENTED_EDGE('',*,*,#103941,.F.); +#103941 = EDGE_CURVE('',#103918,#103934,#103942,.T.); +#103942 = LINE('',#103943,#103944); +#103943 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#103944 = VECTOR('',#103945,1.); +#103945 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#103946 = PLANE('',#103947); +#103947 = AXIS2_PLACEMENT_3D('',#103948,#103949,#103950); +#103948 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,8.5)); +#103949 = DIRECTION('',(0.,0.,1.)); +#103950 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#103951 = ADVANCED_FACE('',(#103952),#103968,.F.); +#103952 = FACE_BOUND('',#103953,.F.); +#103953 = EDGE_LOOP('',(#103954,#103955,#103961,#103962)); +#103954 = ORIENTED_EDGE('',*,*,#103523,.T.); +#103955 = ORIENTED_EDGE('',*,*,#103956,.F.); +#103956 = EDGE_CURVE('',#103612,#103526,#103957,.T.); +#103957 = LINE('',#103958,#103959); +#103958 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103959 = VECTOR('',#103960,1.); +#103960 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103961 = ORIENTED_EDGE('',*,*,#103611,.T.); +#103962 = ORIENTED_EDGE('',*,*,#103963,.T.); +#103963 = EDGE_CURVE('',#103604,#103524,#103964,.T.); +#103964 = LINE('',#103965,#103966); +#103965 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#103966 = VECTOR('',#103967,1.); +#103967 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103968 = PLANE('',#103969); +#103969 = AXIS2_PLACEMENT_3D('',#103970,#103971,#103972); +#103970 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,0.)); +#103971 = DIRECTION('',(0.,0.,1.)); +#103972 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#103973 = ADVANCED_FACE('',(#103974),#103985,.T.); +#103974 = FACE_BOUND('',#103975,.T.); +#103975 = EDGE_LOOP('',(#103976,#103977,#103983,#103984)); +#103976 = ORIENTED_EDGE('',*,*,#103619,.T.); +#103977 = ORIENTED_EDGE('',*,*,#103978,.T.); +#103978 = EDGE_CURVE('',#103620,#103565,#103979,.T.); +#103979 = LINE('',#103980,#103981); +#103980 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#103981 = VECTOR('',#103982,1.); +#103982 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103983 = ORIENTED_EDGE('',*,*,#103572,.F.); +#103984 = ORIENTED_EDGE('',*,*,#103956,.F.); +#103985 = PLANE('',#103986); +#103986 = AXIS2_PLACEMENT_3D('',#103987,#103988,#103989); +#103987 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#103988 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#103989 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#103990 = ADVANCED_FACE('',(#103991,#104002,#104068,#104134,#104200, + #104266,#104332,#104398,#104464),#104530,.F.); +#103991 = FACE_BOUND('',#103992,.F.); +#103992 = EDGE_LOOP('',(#103993,#103999,#104000,#104001)); +#103993 = ORIENTED_EDGE('',*,*,#103994,.T.); +#103994 = EDGE_CURVE('',#103557,#103628,#103995,.T.); +#103995 = LINE('',#103996,#103997); +#103996 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.2)); +#103997 = VECTOR('',#103998,1.); +#103998 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#103999 = ORIENTED_EDGE('',*,*,#103627,.T.); +#104000 = ORIENTED_EDGE('',*,*,#103978,.T.); +#104001 = ORIENTED_EDGE('',*,*,#103564,.T.); +#104002 = FACE_BOUND('',#104003,.F.); +#104003 = EDGE_LOOP('',(#104004,#104014,#104022,#104030,#104038,#104046, + #104054,#104062)); +#104004 = ORIENTED_EDGE('',*,*,#104005,.F.); +#104005 = EDGE_CURVE('',#104006,#104008,#104010,.T.); +#104006 = VERTEX_POINT('',#104007); +#104007 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104008 = VERTEX_POINT('',#104009); +#104009 = CARTESIAN_POINT('',(0.1,-18.23,0.2)); +#104010 = LINE('',#104011,#104012); +#104011 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104012 = VECTOR('',#104013,1.); +#104013 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104014 = ORIENTED_EDGE('',*,*,#104015,.T.); +#104015 = EDGE_CURVE('',#104006,#104016,#104018,.T.); +#104016 = VERTEX_POINT('',#104017); +#104017 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#104018 = LINE('',#104019,#104020); +#104019 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104020 = VECTOR('',#104021,1.); +#104021 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104022 = ORIENTED_EDGE('',*,*,#104023,.F.); +#104023 = EDGE_CURVE('',#104024,#104016,#104026,.T.); +#104024 = VERTEX_POINT('',#104025); +#104025 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#104026 = LINE('',#104027,#104028); +#104027 = CARTESIAN_POINT('',(-0.1,-13.335,0.2)); +#104028 = VECTOR('',#104029,1.); +#104029 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104030 = ORIENTED_EDGE('',*,*,#104031,.T.); +#104031 = EDGE_CURVE('',#104024,#104032,#104034,.T.); +#104032 = VERTEX_POINT('',#104033); +#104033 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#104034 = LINE('',#104035,#104036); +#104035 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#104036 = VECTOR('',#104037,1.); +#104037 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104038 = ORIENTED_EDGE('',*,*,#104039,.T.); +#104039 = EDGE_CURVE('',#104032,#104040,#104042,.T.); +#104040 = VERTEX_POINT('',#104041); +#104041 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#104042 = LINE('',#104043,#104044); +#104043 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#104044 = VECTOR('',#104045,1.); +#104045 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104046 = ORIENTED_EDGE('',*,*,#104047,.T.); +#104047 = EDGE_CURVE('',#104040,#104048,#104050,.T.); +#104048 = VERTEX_POINT('',#104049); +#104049 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#104050 = LINE('',#104051,#104052); +#104051 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#104052 = VECTOR('',#104053,1.); +#104053 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104054 = ORIENTED_EDGE('',*,*,#104055,.T.); +#104055 = EDGE_CURVE('',#104048,#104056,#104058,.T.); +#104056 = VERTEX_POINT('',#104057); +#104057 = CARTESIAN_POINT('',(0.1,-18.08,0.2)); +#104058 = LINE('',#104059,#104060); +#104059 = CARTESIAN_POINT('',(0.1,-13.335,0.2)); +#104060 = VECTOR('',#104061,1.); +#104061 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104062 = ORIENTED_EDGE('',*,*,#104063,.T.); +#104063 = EDGE_CURVE('',#104056,#104008,#104064,.T.); +#104064 = LINE('',#104065,#104066); +#104065 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#104066 = VECTOR('',#104067,1.); +#104067 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104068 = FACE_BOUND('',#104069,.F.); +#104069 = EDGE_LOOP('',(#104070,#104080,#104088,#104096,#104104,#104112, + #104120,#104128)); +#104070 = ORIENTED_EDGE('',*,*,#104071,.F.); +#104071 = EDGE_CURVE('',#104072,#104074,#104076,.T.); +#104072 = VERTEX_POINT('',#104073); +#104073 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104074 = VERTEX_POINT('',#104075); +#104075 = CARTESIAN_POINT('',(0.1,-15.69,0.2)); +#104076 = LINE('',#104077,#104078); +#104077 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104078 = VECTOR('',#104079,1.); +#104079 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104080 = ORIENTED_EDGE('',*,*,#104081,.T.); +#104081 = EDGE_CURVE('',#104072,#104082,#104084,.T.); +#104082 = VERTEX_POINT('',#104083); +#104083 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#104084 = LINE('',#104085,#104086); +#104085 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104086 = VECTOR('',#104087,1.); +#104087 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104088 = ORIENTED_EDGE('',*,*,#104089,.F.); +#104089 = EDGE_CURVE('',#104090,#104082,#104092,.T.); +#104090 = VERTEX_POINT('',#104091); +#104091 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#104092 = LINE('',#104093,#104094); +#104093 = CARTESIAN_POINT('',(-0.1,-12.065,0.2)); +#104094 = VECTOR('',#104095,1.); +#104095 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104096 = ORIENTED_EDGE('',*,*,#104097,.T.); +#104097 = EDGE_CURVE('',#104090,#104098,#104100,.T.); +#104098 = VERTEX_POINT('',#104099); +#104099 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#104100 = LINE('',#104101,#104102); +#104101 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#104102 = VECTOR('',#104103,1.); +#104103 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104104 = ORIENTED_EDGE('',*,*,#104105,.T.); +#104105 = EDGE_CURVE('',#104098,#104106,#104108,.T.); +#104106 = VERTEX_POINT('',#104107); +#104107 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#104108 = LINE('',#104109,#104110); +#104109 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#104110 = VECTOR('',#104111,1.); +#104111 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104112 = ORIENTED_EDGE('',*,*,#104113,.T.); +#104113 = EDGE_CURVE('',#104106,#104114,#104116,.T.); +#104114 = VERTEX_POINT('',#104115); +#104115 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#104116 = LINE('',#104117,#104118); +#104117 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#104118 = VECTOR('',#104119,1.); +#104119 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104120 = ORIENTED_EDGE('',*,*,#104121,.T.); +#104121 = EDGE_CURVE('',#104114,#104122,#104124,.T.); +#104122 = VERTEX_POINT('',#104123); +#104123 = CARTESIAN_POINT('',(0.1,-15.54,0.2)); +#104124 = LINE('',#104125,#104126); +#104125 = CARTESIAN_POINT('',(0.1,-12.065,0.2)); +#104126 = VECTOR('',#104127,1.); +#104127 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104128 = ORIENTED_EDGE('',*,*,#104129,.T.); +#104129 = EDGE_CURVE('',#104122,#104074,#104130,.T.); +#104130 = LINE('',#104131,#104132); +#104131 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#104132 = VECTOR('',#104133,1.); +#104133 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104134 = FACE_BOUND('',#104135,.F.); +#104135 = EDGE_LOOP('',(#104136,#104146,#104154,#104162,#104170,#104178, + #104186,#104194)); +#104136 = ORIENTED_EDGE('',*,*,#104137,.F.); +#104137 = EDGE_CURVE('',#104138,#104140,#104142,.T.); +#104138 = VERTEX_POINT('',#104139); +#104139 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104140 = VERTEX_POINT('',#104141); +#104141 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#104142 = LINE('',#104143,#104144); +#104143 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104144 = VECTOR('',#104145,1.); +#104145 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104146 = ORIENTED_EDGE('',*,*,#104147,.T.); +#104147 = EDGE_CURVE('',#104138,#104148,#104150,.T.); +#104148 = VERTEX_POINT('',#104149); +#104149 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#104150 = LINE('',#104151,#104152); +#104151 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104152 = VECTOR('',#104153,1.); +#104153 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104154 = ORIENTED_EDGE('',*,*,#104155,.F.); +#104155 = EDGE_CURVE('',#104156,#104148,#104158,.T.); +#104156 = VERTEX_POINT('',#104157); +#104157 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#104158 = LINE('',#104159,#104160); +#104159 = CARTESIAN_POINT('',(-0.1,-10.795,0.2)); +#104160 = VECTOR('',#104161,1.); +#104161 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104162 = ORIENTED_EDGE('',*,*,#104163,.T.); +#104163 = EDGE_CURVE('',#104156,#104164,#104166,.T.); +#104164 = VERTEX_POINT('',#104165); +#104165 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#104166 = LINE('',#104167,#104168); +#104167 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#104168 = VECTOR('',#104169,1.); +#104169 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104170 = ORIENTED_EDGE('',*,*,#104171,.T.); +#104171 = EDGE_CURVE('',#104164,#104172,#104174,.T.); +#104172 = VERTEX_POINT('',#104173); +#104173 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#104174 = LINE('',#104175,#104176); +#104175 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#104176 = VECTOR('',#104177,1.); +#104177 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104178 = ORIENTED_EDGE('',*,*,#104179,.T.); +#104179 = EDGE_CURVE('',#104172,#104180,#104182,.T.); +#104180 = VERTEX_POINT('',#104181); +#104181 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#104182 = LINE('',#104183,#104184); +#104183 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#104184 = VECTOR('',#104185,1.); +#104185 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104186 = ORIENTED_EDGE('',*,*,#104187,.T.); +#104187 = EDGE_CURVE('',#104180,#104188,#104190,.T.); +#104188 = VERTEX_POINT('',#104189); +#104189 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#104190 = LINE('',#104191,#104192); +#104191 = CARTESIAN_POINT('',(0.1,-10.795,0.2)); +#104192 = VECTOR('',#104193,1.); +#104193 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104194 = ORIENTED_EDGE('',*,*,#104195,.T.); +#104195 = EDGE_CURVE('',#104188,#104140,#104196,.T.); +#104196 = LINE('',#104197,#104198); +#104197 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#104198 = VECTOR('',#104199,1.); +#104199 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104200 = FACE_BOUND('',#104201,.F.); +#104201 = EDGE_LOOP('',(#104202,#104212,#104220,#104228,#104236,#104244, + #104252,#104260)); +#104202 = ORIENTED_EDGE('',*,*,#104203,.F.); +#104203 = EDGE_CURVE('',#104204,#104206,#104208,.T.); +#104204 = VERTEX_POINT('',#104205); +#104205 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104206 = VERTEX_POINT('',#104207); +#104207 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#104208 = LINE('',#104209,#104210); +#104209 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104210 = VECTOR('',#104211,1.); +#104211 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104212 = ORIENTED_EDGE('',*,*,#104213,.T.); +#104213 = EDGE_CURVE('',#104204,#104214,#104216,.T.); +#104214 = VERTEX_POINT('',#104215); +#104215 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#104216 = LINE('',#104217,#104218); +#104217 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104218 = VECTOR('',#104219,1.); +#104219 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104220 = ORIENTED_EDGE('',*,*,#104221,.F.); +#104221 = EDGE_CURVE('',#104222,#104214,#104224,.T.); +#104222 = VERTEX_POINT('',#104223); +#104223 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#104224 = LINE('',#104225,#104226); +#104225 = CARTESIAN_POINT('',(-0.1,-9.525,0.2)); +#104226 = VECTOR('',#104227,1.); +#104227 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104228 = ORIENTED_EDGE('',*,*,#104229,.T.); +#104229 = EDGE_CURVE('',#104222,#104230,#104232,.T.); +#104230 = VERTEX_POINT('',#104231); +#104231 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#104232 = LINE('',#104233,#104234); +#104233 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#104234 = VECTOR('',#104235,1.); +#104235 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104236 = ORIENTED_EDGE('',*,*,#104237,.T.); +#104237 = EDGE_CURVE('',#104230,#104238,#104240,.T.); +#104238 = VERTEX_POINT('',#104239); +#104239 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#104240 = LINE('',#104241,#104242); +#104241 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#104242 = VECTOR('',#104243,1.); +#104243 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104244 = ORIENTED_EDGE('',*,*,#104245,.T.); +#104245 = EDGE_CURVE('',#104238,#104246,#104248,.T.); +#104246 = VERTEX_POINT('',#104247); +#104247 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#104248 = LINE('',#104249,#104250); +#104249 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#104250 = VECTOR('',#104251,1.); +#104251 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104252 = ORIENTED_EDGE('',*,*,#104253,.T.); +#104253 = EDGE_CURVE('',#104246,#104254,#104256,.T.); +#104254 = VERTEX_POINT('',#104255); +#104255 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#104256 = LINE('',#104257,#104258); +#104257 = CARTESIAN_POINT('',(0.1,-9.525,0.2)); +#104258 = VECTOR('',#104259,1.); +#104259 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104260 = ORIENTED_EDGE('',*,*,#104261,.T.); +#104261 = EDGE_CURVE('',#104254,#104206,#104262,.T.); +#104262 = LINE('',#104263,#104264); +#104263 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#104264 = VECTOR('',#104265,1.); +#104265 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104266 = FACE_BOUND('',#104267,.F.); +#104267 = EDGE_LOOP('',(#104268,#104278,#104286,#104294,#104302,#104310, + #104318,#104326)); +#104268 = ORIENTED_EDGE('',*,*,#104269,.F.); +#104269 = EDGE_CURVE('',#104270,#104272,#104274,.T.); +#104270 = VERTEX_POINT('',#104271); +#104271 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104272 = VERTEX_POINT('',#104273); +#104273 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#104274 = LINE('',#104275,#104276); +#104275 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104276 = VECTOR('',#104277,1.); +#104277 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104278 = ORIENTED_EDGE('',*,*,#104279,.T.); +#104279 = EDGE_CURVE('',#104270,#104280,#104282,.T.); +#104280 = VERTEX_POINT('',#104281); +#104281 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#104282 = LINE('',#104283,#104284); +#104283 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104284 = VECTOR('',#104285,1.); +#104285 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104286 = ORIENTED_EDGE('',*,*,#104287,.F.); +#104287 = EDGE_CURVE('',#104288,#104280,#104290,.T.); +#104288 = VERTEX_POINT('',#104289); +#104289 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#104290 = LINE('',#104291,#104292); +#104291 = CARTESIAN_POINT('',(-0.1,-8.255,0.2)); +#104292 = VECTOR('',#104293,1.); +#104293 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104294 = ORIENTED_EDGE('',*,*,#104295,.T.); +#104295 = EDGE_CURVE('',#104288,#104296,#104298,.T.); +#104296 = VERTEX_POINT('',#104297); +#104297 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#104298 = LINE('',#104299,#104300); +#104299 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#104300 = VECTOR('',#104301,1.); +#104301 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104302 = ORIENTED_EDGE('',*,*,#104303,.T.); +#104303 = EDGE_CURVE('',#104296,#104304,#104306,.T.); +#104304 = VERTEX_POINT('',#104305); +#104305 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#104306 = LINE('',#104307,#104308); +#104307 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#104308 = VECTOR('',#104309,1.); +#104309 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104310 = ORIENTED_EDGE('',*,*,#104311,.T.); +#104311 = EDGE_CURVE('',#104304,#104312,#104314,.T.); +#104312 = VERTEX_POINT('',#104313); +#104313 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#104314 = LINE('',#104315,#104316); +#104315 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#104316 = VECTOR('',#104317,1.); +#104317 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104318 = ORIENTED_EDGE('',*,*,#104319,.T.); +#104319 = EDGE_CURVE('',#104312,#104320,#104322,.T.); +#104320 = VERTEX_POINT('',#104321); +#104321 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#104322 = LINE('',#104323,#104324); +#104323 = CARTESIAN_POINT('',(0.1,-8.255,0.2)); +#104324 = VECTOR('',#104325,1.); +#104325 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104326 = ORIENTED_EDGE('',*,*,#104327,.T.); +#104327 = EDGE_CURVE('',#104320,#104272,#104328,.T.); +#104328 = LINE('',#104329,#104330); +#104329 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#104330 = VECTOR('',#104331,1.); +#104331 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104332 = FACE_BOUND('',#104333,.F.); +#104333 = EDGE_LOOP('',(#104334,#104344,#104352,#104360,#104368,#104376, + #104384,#104392)); +#104334 = ORIENTED_EDGE('',*,*,#104335,.F.); +#104335 = EDGE_CURVE('',#104336,#104338,#104340,.T.); +#104336 = VERTEX_POINT('',#104337); +#104337 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104338 = VERTEX_POINT('',#104339); +#104339 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#104340 = LINE('',#104341,#104342); +#104341 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104342 = VECTOR('',#104343,1.); +#104343 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104344 = ORIENTED_EDGE('',*,*,#104345,.T.); +#104345 = EDGE_CURVE('',#104336,#104346,#104348,.T.); +#104346 = VERTEX_POINT('',#104347); +#104347 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#104348 = LINE('',#104349,#104350); +#104349 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104350 = VECTOR('',#104351,1.); +#104351 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104352 = ORIENTED_EDGE('',*,*,#104353,.F.); +#104353 = EDGE_CURVE('',#104354,#104346,#104356,.T.); +#104354 = VERTEX_POINT('',#104355); +#104355 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#104356 = LINE('',#104357,#104358); +#104357 = CARTESIAN_POINT('',(-0.1,-6.985,0.2)); +#104358 = VECTOR('',#104359,1.); +#104359 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104360 = ORIENTED_EDGE('',*,*,#104361,.T.); +#104361 = EDGE_CURVE('',#104354,#104362,#104364,.T.); +#104362 = VERTEX_POINT('',#104363); +#104363 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#104364 = LINE('',#104365,#104366); +#104365 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#104366 = VECTOR('',#104367,1.); +#104367 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104368 = ORIENTED_EDGE('',*,*,#104369,.T.); +#104369 = EDGE_CURVE('',#104362,#104370,#104372,.T.); +#104370 = VERTEX_POINT('',#104371); +#104371 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#104372 = LINE('',#104373,#104374); +#104373 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#104374 = VECTOR('',#104375,1.); +#104375 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104376 = ORIENTED_EDGE('',*,*,#104377,.T.); +#104377 = EDGE_CURVE('',#104370,#104378,#104380,.T.); +#104378 = VERTEX_POINT('',#104379); +#104379 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#104380 = LINE('',#104381,#104382); +#104381 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#104382 = VECTOR('',#104383,1.); +#104383 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104384 = ORIENTED_EDGE('',*,*,#104385,.T.); +#104385 = EDGE_CURVE('',#104378,#104386,#104388,.T.); +#104386 = VERTEX_POINT('',#104387); +#104387 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#104388 = LINE('',#104389,#104390); +#104389 = CARTESIAN_POINT('',(0.1,-6.985,0.2)); +#104390 = VECTOR('',#104391,1.); +#104391 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104392 = ORIENTED_EDGE('',*,*,#104393,.T.); +#104393 = EDGE_CURVE('',#104386,#104338,#104394,.T.); +#104394 = LINE('',#104395,#104396); +#104395 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#104396 = VECTOR('',#104397,1.); +#104397 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104398 = FACE_BOUND('',#104399,.F.); +#104399 = EDGE_LOOP('',(#104400,#104410,#104418,#104426,#104434,#104442, + #104450,#104458)); +#104400 = ORIENTED_EDGE('',*,*,#104401,.F.); +#104401 = EDGE_CURVE('',#104402,#104404,#104406,.T.); +#104402 = VERTEX_POINT('',#104403); +#104403 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104404 = VERTEX_POINT('',#104405); +#104405 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#104406 = LINE('',#104407,#104408); +#104407 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104408 = VECTOR('',#104409,1.); +#104409 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104410 = ORIENTED_EDGE('',*,*,#104411,.T.); +#104411 = EDGE_CURVE('',#104402,#104412,#104414,.T.); +#104412 = VERTEX_POINT('',#104413); +#104413 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#104414 = LINE('',#104415,#104416); +#104415 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104416 = VECTOR('',#104417,1.); +#104417 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104418 = ORIENTED_EDGE('',*,*,#104419,.F.); +#104419 = EDGE_CURVE('',#104420,#104412,#104422,.T.); +#104420 = VERTEX_POINT('',#104421); +#104421 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#104422 = LINE('',#104423,#104424); +#104423 = CARTESIAN_POINT('',(-0.1,-5.715,0.2)); +#104424 = VECTOR('',#104425,1.); +#104425 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104426 = ORIENTED_EDGE('',*,*,#104427,.T.); +#104427 = EDGE_CURVE('',#104420,#104428,#104430,.T.); +#104428 = VERTEX_POINT('',#104429); +#104429 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#104430 = LINE('',#104431,#104432); +#104431 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#104432 = VECTOR('',#104433,1.); +#104433 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104434 = ORIENTED_EDGE('',*,*,#104435,.T.); +#104435 = EDGE_CURVE('',#104428,#104436,#104438,.T.); +#104436 = VERTEX_POINT('',#104437); +#104437 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#104438 = LINE('',#104439,#104440); +#104439 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#104440 = VECTOR('',#104441,1.); +#104441 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104442 = ORIENTED_EDGE('',*,*,#104443,.T.); +#104443 = EDGE_CURVE('',#104436,#104444,#104446,.T.); +#104444 = VERTEX_POINT('',#104445); +#104445 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#104446 = LINE('',#104447,#104448); +#104447 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#104448 = VECTOR('',#104449,1.); +#104449 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104450 = ORIENTED_EDGE('',*,*,#104451,.T.); +#104451 = EDGE_CURVE('',#104444,#104452,#104454,.T.); +#104452 = VERTEX_POINT('',#104453); +#104453 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#104454 = LINE('',#104455,#104456); +#104455 = CARTESIAN_POINT('',(0.1,-5.715,0.2)); +#104456 = VECTOR('',#104457,1.); +#104457 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104458 = ORIENTED_EDGE('',*,*,#104459,.T.); +#104459 = EDGE_CURVE('',#104452,#104404,#104460,.T.); +#104460 = LINE('',#104461,#104462); +#104461 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#104462 = VECTOR('',#104463,1.); +#104463 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104464 = FACE_BOUND('',#104465,.F.); +#104465 = EDGE_LOOP('',(#104466,#104476,#104484,#104492,#104500,#104508, + #104516,#104524)); +#104466 = ORIENTED_EDGE('',*,*,#104467,.F.); +#104467 = EDGE_CURVE('',#104468,#104470,#104472,.T.); +#104468 = VERTEX_POINT('',#104469); +#104469 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104470 = VERTEX_POINT('',#104471); +#104471 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#104472 = LINE('',#104473,#104474); +#104473 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104474 = VECTOR('',#104475,1.); +#104475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104476 = ORIENTED_EDGE('',*,*,#104477,.T.); +#104477 = EDGE_CURVE('',#104468,#104478,#104480,.T.); +#104478 = VERTEX_POINT('',#104479); +#104479 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#104480 = LINE('',#104481,#104482); +#104481 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104482 = VECTOR('',#104483,1.); +#104483 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104484 = ORIENTED_EDGE('',*,*,#104485,.F.); +#104485 = EDGE_CURVE('',#104486,#104478,#104488,.T.); +#104486 = VERTEX_POINT('',#104487); +#104487 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#104488 = LINE('',#104489,#104490); +#104489 = CARTESIAN_POINT('',(-0.1,-4.445,0.2)); +#104490 = VECTOR('',#104491,1.); +#104491 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104492 = ORIENTED_EDGE('',*,*,#104493,.T.); +#104493 = EDGE_CURVE('',#104486,#104494,#104496,.T.); +#104494 = VERTEX_POINT('',#104495); +#104495 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#104496 = LINE('',#104497,#104498); +#104497 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#104498 = VECTOR('',#104499,1.); +#104499 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104500 = ORIENTED_EDGE('',*,*,#104501,.T.); +#104501 = EDGE_CURVE('',#104494,#104502,#104504,.T.); +#104502 = VERTEX_POINT('',#104503); +#104503 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#104504 = LINE('',#104505,#104506); +#104505 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#104506 = VECTOR('',#104507,1.); +#104507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104508 = ORIENTED_EDGE('',*,*,#104509,.T.); +#104509 = EDGE_CURVE('',#104502,#104510,#104512,.T.); +#104510 = VERTEX_POINT('',#104511); +#104511 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#104512 = LINE('',#104513,#104514); +#104513 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#104514 = VECTOR('',#104515,1.); +#104515 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104516 = ORIENTED_EDGE('',*,*,#104517,.T.); +#104517 = EDGE_CURVE('',#104510,#104518,#104520,.T.); +#104518 = VERTEX_POINT('',#104519); +#104519 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#104520 = LINE('',#104521,#104522); +#104521 = CARTESIAN_POINT('',(0.1,-4.445,0.2)); +#104522 = VECTOR('',#104523,1.); +#104523 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104524 = ORIENTED_EDGE('',*,*,#104525,.T.); +#104525 = EDGE_CURVE('',#104518,#104470,#104526,.T.); +#104526 = LINE('',#104527,#104528); +#104527 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#104528 = VECTOR('',#104529,1.); +#104529 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104530 = PLANE('',#104531); +#104531 = AXIS2_PLACEMENT_3D('',#104532,#104533,#104534); +#104532 = CARTESIAN_POINT('',(-9.592326932761E-16,-8.89,0.2)); +#104533 = DIRECTION('',(0.,0.,1.)); +#104534 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#104535 = ADVANCED_FACE('',(#104536),#104542,.T.); +#104536 = FACE_BOUND('',#104537,.T.); +#104537 = EDGE_LOOP('',(#104538,#104539,#104540,#104541)); +#104538 = ORIENTED_EDGE('',*,*,#103556,.T.); +#104539 = ORIENTED_EDGE('',*,*,#103994,.T.); +#104540 = ORIENTED_EDGE('',*,*,#103635,.F.); +#104541 = ORIENTED_EDGE('',*,*,#103652,.F.); +#104542 = PLANE('',#104543); +#104543 = AXIS2_PLACEMENT_3D('',#104544,#104545,#104546); +#104544 = CARTESIAN_POINT('',(0.846666666667,-19.05,0.)); +#104545 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104546 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104547 = ADVANCED_FACE('',(#104548),#104554,.F.); +#104548 = FACE_BOUND('',#104549,.F.); +#104549 = EDGE_LOOP('',(#104550,#104551,#104552,#104553)); +#104550 = ORIENTED_EDGE('',*,*,#103603,.T.); +#104551 = ORIENTED_EDGE('',*,*,#103668,.T.); +#104552 = ORIENTED_EDGE('',*,*,#103533,.F.); +#104553 = ORIENTED_EDGE('',*,*,#103963,.F.); +#104554 = PLANE('',#104555); +#104555 = AXIS2_PLACEMENT_3D('',#104556,#104557,#104558); +#104556 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#104557 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104558 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104559 = ADVANCED_FACE('',(#104560),#104585,.T.); +#104560 = FACE_BOUND('',#104561,.T.); +#104561 = EDGE_LOOP('',(#104562,#104570,#104571,#104579)); +#104562 = ORIENTED_EDGE('',*,*,#104563,.F.); +#104563 = EDGE_CURVE('',#103678,#104564,#104566,.T.); +#104564 = VERTEX_POINT('',#104565); +#104565 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#104566 = LINE('',#104567,#104568); +#104567 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#104568 = VECTOR('',#104569,1.); +#104569 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104570 = ORIENTED_EDGE('',*,*,#103677,.T.); +#104571 = ORIENTED_EDGE('',*,*,#104572,.T.); +#104572 = EDGE_CURVE('',#103680,#104573,#104575,.T.); +#104573 = VERTEX_POINT('',#104574); +#104574 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#104575 = LINE('',#104576,#104577); +#104576 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#104577 = VECTOR('',#104578,1.); +#104578 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104579 = ORIENTED_EDGE('',*,*,#104580,.F.); +#104580 = EDGE_CURVE('',#104564,#104573,#104581,.T.); +#104581 = LINE('',#104582,#104583); +#104582 = CARTESIAN_POINT('',(0.3,-18.38,8.2)); +#104583 = VECTOR('',#104584,1.); +#104584 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104585 = PLANE('',#104586); +#104586 = AXIS2_PLACEMENT_3D('',#104587,#104588,#104589); +#104587 = CARTESIAN_POINT('',(0.45,-18.38,8.35)); +#104588 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104589 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104590 = ADVANCED_FACE('',(#104591),#104609,.T.); +#104591 = FACE_BOUND('',#104592,.T.); +#104592 = EDGE_LOOP('',(#104593,#104594,#104595,#104603)); +#104593 = ORIENTED_EDGE('',*,*,#104572,.F.); +#104594 = ORIENTED_EDGE('',*,*,#103703,.T.); +#104595 = ORIENTED_EDGE('',*,*,#104596,.T.); +#104596 = EDGE_CURVE('',#103696,#104597,#104599,.T.); +#104597 = VERTEX_POINT('',#104598); +#104598 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#104599 = LINE('',#104600,#104601); +#104600 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#104601 = VECTOR('',#104602,1.); +#104602 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104603 = ORIENTED_EDGE('',*,*,#104604,.F.); +#104604 = EDGE_CURVE('',#104573,#104597,#104605,.T.); +#104605 = LINE('',#104606,#104607); +#104606 = CARTESIAN_POINT('',(0.6,-17.48,8.2)); +#104607 = VECTOR('',#104608,1.); +#104608 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104609 = PLANE('',#104610); +#104610 = AXIS2_PLACEMENT_3D('',#104611,#104612,#104613); +#104611 = CARTESIAN_POINT('',(0.6,-17.33,8.35)); +#104612 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104613 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104614 = ADVANCED_FACE('',(#104615),#104633,.T.); +#104615 = FACE_BOUND('',#104616,.T.); +#104616 = EDGE_LOOP('',(#104617,#104618,#104619,#104627)); +#104617 = ORIENTED_EDGE('',*,*,#104596,.F.); +#104618 = ORIENTED_EDGE('',*,*,#103695,.T.); +#104619 = ORIENTED_EDGE('',*,*,#104620,.T.); +#104620 = EDGE_CURVE('',#103688,#104621,#104623,.T.); +#104621 = VERTEX_POINT('',#104622); +#104622 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#104623 = LINE('',#104624,#104625); +#104624 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#104625 = VECTOR('',#104626,1.); +#104626 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104627 = ORIENTED_EDGE('',*,*,#104628,.F.); +#104628 = EDGE_CURVE('',#104597,#104621,#104629,.T.); +#104629 = LINE('',#104630,#104631); +#104630 = CARTESIAN_POINT('',(-0.3,-17.18,8.2)); +#104631 = VECTOR('',#104632,1.); +#104632 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104633 = PLANE('',#104634); +#104634 = AXIS2_PLACEMENT_3D('',#104635,#104636,#104637); +#104635 = CARTESIAN_POINT('',(-0.45,-17.18,8.35)); +#104636 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104637 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104638 = ADVANCED_FACE('',(#104639),#104650,.T.); +#104639 = FACE_BOUND('',#104640,.T.); +#104640 = EDGE_LOOP('',(#104641,#104642,#104643,#104644)); +#104641 = ORIENTED_EDGE('',*,*,#104620,.F.); +#104642 = ORIENTED_EDGE('',*,*,#103687,.T.); +#104643 = ORIENTED_EDGE('',*,*,#104563,.T.); +#104644 = ORIENTED_EDGE('',*,*,#104645,.F.); +#104645 = EDGE_CURVE('',#104621,#104564,#104646,.T.); +#104646 = LINE('',#104647,#104648); +#104647 = CARTESIAN_POINT('',(-0.6,-18.08,8.2)); +#104648 = VECTOR('',#104649,1.); +#104649 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104650 = PLANE('',#104651); +#104651 = AXIS2_PLACEMENT_3D('',#104652,#104653,#104654); +#104652 = CARTESIAN_POINT('',(-0.6,-18.23,8.35)); +#104653 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104654 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104655 = ADVANCED_FACE('',(#104656),#104681,.T.); +#104656 = FACE_BOUND('',#104657,.T.); +#104657 = EDGE_LOOP('',(#104658,#104666,#104667,#104675)); +#104658 = ORIENTED_EDGE('',*,*,#104659,.F.); +#104659 = EDGE_CURVE('',#103712,#104660,#104662,.T.); +#104660 = VERTEX_POINT('',#104661); +#104661 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#104662 = LINE('',#104663,#104664); +#104663 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#104664 = VECTOR('',#104665,1.); +#104665 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104666 = ORIENTED_EDGE('',*,*,#103711,.T.); +#104667 = ORIENTED_EDGE('',*,*,#104668,.T.); +#104668 = EDGE_CURVE('',#103714,#104669,#104671,.T.); +#104669 = VERTEX_POINT('',#104670); +#104670 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#104671 = LINE('',#104672,#104673); +#104672 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#104673 = VECTOR('',#104674,1.); +#104674 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104675 = ORIENTED_EDGE('',*,*,#104676,.F.); +#104676 = EDGE_CURVE('',#104660,#104669,#104677,.T.); +#104677 = LINE('',#104678,#104679); +#104678 = CARTESIAN_POINT('',(0.3,-15.84,8.2)); +#104679 = VECTOR('',#104680,1.); +#104680 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104681 = PLANE('',#104682); +#104682 = AXIS2_PLACEMENT_3D('',#104683,#104684,#104685); +#104683 = CARTESIAN_POINT('',(0.45,-15.84,8.35)); +#104684 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104685 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104686 = ADVANCED_FACE('',(#104687),#104705,.T.); +#104687 = FACE_BOUND('',#104688,.T.); +#104688 = EDGE_LOOP('',(#104689,#104690,#104691,#104699)); +#104689 = ORIENTED_EDGE('',*,*,#104668,.F.); +#104690 = ORIENTED_EDGE('',*,*,#103737,.T.); +#104691 = ORIENTED_EDGE('',*,*,#104692,.T.); +#104692 = EDGE_CURVE('',#103730,#104693,#104695,.T.); +#104693 = VERTEX_POINT('',#104694); +#104694 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#104695 = LINE('',#104696,#104697); +#104696 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#104697 = VECTOR('',#104698,1.); +#104698 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104699 = ORIENTED_EDGE('',*,*,#104700,.F.); +#104700 = EDGE_CURVE('',#104669,#104693,#104701,.T.); +#104701 = LINE('',#104702,#104703); +#104702 = CARTESIAN_POINT('',(0.6,-14.94,8.2)); +#104703 = VECTOR('',#104704,1.); +#104704 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104705 = PLANE('',#104706); +#104706 = AXIS2_PLACEMENT_3D('',#104707,#104708,#104709); +#104707 = CARTESIAN_POINT('',(0.6,-14.79,8.35)); +#104708 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104709 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104710 = ADVANCED_FACE('',(#104711),#104729,.T.); +#104711 = FACE_BOUND('',#104712,.T.); +#104712 = EDGE_LOOP('',(#104713,#104714,#104715,#104723)); +#104713 = ORIENTED_EDGE('',*,*,#104692,.F.); +#104714 = ORIENTED_EDGE('',*,*,#103729,.T.); +#104715 = ORIENTED_EDGE('',*,*,#104716,.T.); +#104716 = EDGE_CURVE('',#103722,#104717,#104719,.T.); +#104717 = VERTEX_POINT('',#104718); +#104718 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#104719 = LINE('',#104720,#104721); +#104720 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#104721 = VECTOR('',#104722,1.); +#104722 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104723 = ORIENTED_EDGE('',*,*,#104724,.F.); +#104724 = EDGE_CURVE('',#104693,#104717,#104725,.T.); +#104725 = LINE('',#104726,#104727); +#104726 = CARTESIAN_POINT('',(-0.3,-14.64,8.2)); +#104727 = VECTOR('',#104728,1.); +#104728 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104729 = PLANE('',#104730); +#104730 = AXIS2_PLACEMENT_3D('',#104731,#104732,#104733); +#104731 = CARTESIAN_POINT('',(-0.45,-14.64,8.35)); +#104732 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104733 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104734 = ADVANCED_FACE('',(#104735),#104746,.T.); +#104735 = FACE_BOUND('',#104736,.T.); +#104736 = EDGE_LOOP('',(#104737,#104738,#104739,#104740)); +#104737 = ORIENTED_EDGE('',*,*,#104716,.F.); +#104738 = ORIENTED_EDGE('',*,*,#103721,.T.); +#104739 = ORIENTED_EDGE('',*,*,#104659,.T.); +#104740 = ORIENTED_EDGE('',*,*,#104741,.F.); +#104741 = EDGE_CURVE('',#104717,#104660,#104742,.T.); +#104742 = LINE('',#104743,#104744); +#104743 = CARTESIAN_POINT('',(-0.6,-15.54,8.2)); +#104744 = VECTOR('',#104745,1.); +#104745 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104746 = PLANE('',#104747); +#104747 = AXIS2_PLACEMENT_3D('',#104748,#104749,#104750); +#104748 = CARTESIAN_POINT('',(-0.6,-15.69,8.35)); +#104749 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104750 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104751 = ADVANCED_FACE('',(#104752),#104777,.T.); +#104752 = FACE_BOUND('',#104753,.T.); +#104753 = EDGE_LOOP('',(#104754,#104762,#104763,#104771)); +#104754 = ORIENTED_EDGE('',*,*,#104755,.F.); +#104755 = EDGE_CURVE('',#103746,#104756,#104758,.T.); +#104756 = VERTEX_POINT('',#104757); +#104757 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#104758 = LINE('',#104759,#104760); +#104759 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#104760 = VECTOR('',#104761,1.); +#104761 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104762 = ORIENTED_EDGE('',*,*,#103745,.T.); +#104763 = ORIENTED_EDGE('',*,*,#104764,.T.); +#104764 = EDGE_CURVE('',#103748,#104765,#104767,.T.); +#104765 = VERTEX_POINT('',#104766); +#104766 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#104767 = LINE('',#104768,#104769); +#104768 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#104769 = VECTOR('',#104770,1.); +#104770 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104771 = ORIENTED_EDGE('',*,*,#104772,.F.); +#104772 = EDGE_CURVE('',#104756,#104765,#104773,.T.); +#104773 = LINE('',#104774,#104775); +#104774 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#104775 = VECTOR('',#104776,1.); +#104776 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104777 = PLANE('',#104778); +#104778 = AXIS2_PLACEMENT_3D('',#104779,#104780,#104781); +#104779 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#104780 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104781 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104782 = ADVANCED_FACE('',(#104783),#104801,.T.); +#104783 = FACE_BOUND('',#104784,.T.); +#104784 = EDGE_LOOP('',(#104785,#104786,#104787,#104795)); +#104785 = ORIENTED_EDGE('',*,*,#104764,.F.); +#104786 = ORIENTED_EDGE('',*,*,#103771,.T.); +#104787 = ORIENTED_EDGE('',*,*,#104788,.T.); +#104788 = EDGE_CURVE('',#103764,#104789,#104791,.T.); +#104789 = VERTEX_POINT('',#104790); +#104790 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#104791 = LINE('',#104792,#104793); +#104792 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#104793 = VECTOR('',#104794,1.); +#104794 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104795 = ORIENTED_EDGE('',*,*,#104796,.F.); +#104796 = EDGE_CURVE('',#104765,#104789,#104797,.T.); +#104797 = LINE('',#104798,#104799); +#104798 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#104799 = VECTOR('',#104800,1.); +#104800 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104801 = PLANE('',#104802); +#104802 = AXIS2_PLACEMENT_3D('',#104803,#104804,#104805); +#104803 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#104804 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104805 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104806 = ADVANCED_FACE('',(#104807),#104825,.T.); +#104807 = FACE_BOUND('',#104808,.T.); +#104808 = EDGE_LOOP('',(#104809,#104810,#104811,#104819)); +#104809 = ORIENTED_EDGE('',*,*,#104788,.F.); +#104810 = ORIENTED_EDGE('',*,*,#103763,.T.); +#104811 = ORIENTED_EDGE('',*,*,#104812,.T.); +#104812 = EDGE_CURVE('',#103756,#104813,#104815,.T.); +#104813 = VERTEX_POINT('',#104814); +#104814 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#104815 = LINE('',#104816,#104817); +#104816 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#104817 = VECTOR('',#104818,1.); +#104818 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104819 = ORIENTED_EDGE('',*,*,#104820,.F.); +#104820 = EDGE_CURVE('',#104789,#104813,#104821,.T.); +#104821 = LINE('',#104822,#104823); +#104822 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#104823 = VECTOR('',#104824,1.); +#104824 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104825 = PLANE('',#104826); +#104826 = AXIS2_PLACEMENT_3D('',#104827,#104828,#104829); +#104827 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#104828 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104829 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104830 = ADVANCED_FACE('',(#104831),#104842,.T.); +#104831 = FACE_BOUND('',#104832,.T.); +#104832 = EDGE_LOOP('',(#104833,#104834,#104835,#104836)); +#104833 = ORIENTED_EDGE('',*,*,#104812,.F.); +#104834 = ORIENTED_EDGE('',*,*,#103755,.T.); +#104835 = ORIENTED_EDGE('',*,*,#104755,.T.); +#104836 = ORIENTED_EDGE('',*,*,#104837,.F.); +#104837 = EDGE_CURVE('',#104813,#104756,#104838,.T.); +#104838 = LINE('',#104839,#104840); +#104839 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#104840 = VECTOR('',#104841,1.); +#104841 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104842 = PLANE('',#104843); +#104843 = AXIS2_PLACEMENT_3D('',#104844,#104845,#104846); +#104844 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#104845 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104846 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104847 = ADVANCED_FACE('',(#104848),#104873,.T.); +#104848 = FACE_BOUND('',#104849,.T.); +#104849 = EDGE_LOOP('',(#104850,#104858,#104859,#104867)); +#104850 = ORIENTED_EDGE('',*,*,#104851,.F.); +#104851 = EDGE_CURVE('',#103780,#104852,#104854,.T.); +#104852 = VERTEX_POINT('',#104853); +#104853 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#104854 = LINE('',#104855,#104856); +#104855 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#104856 = VECTOR('',#104857,1.); +#104857 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104858 = ORIENTED_EDGE('',*,*,#103779,.T.); +#104859 = ORIENTED_EDGE('',*,*,#104860,.T.); +#104860 = EDGE_CURVE('',#103782,#104861,#104863,.T.); +#104861 = VERTEX_POINT('',#104862); +#104862 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#104863 = LINE('',#104864,#104865); +#104864 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#104865 = VECTOR('',#104866,1.); +#104866 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104867 = ORIENTED_EDGE('',*,*,#104868,.F.); +#104868 = EDGE_CURVE('',#104852,#104861,#104869,.T.); +#104869 = LINE('',#104870,#104871); +#104870 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#104871 = VECTOR('',#104872,1.); +#104872 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104873 = PLANE('',#104874); +#104874 = AXIS2_PLACEMENT_3D('',#104875,#104876,#104877); +#104875 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#104876 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104877 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104878 = ADVANCED_FACE('',(#104879),#104897,.T.); +#104879 = FACE_BOUND('',#104880,.T.); +#104880 = EDGE_LOOP('',(#104881,#104882,#104883,#104891)); +#104881 = ORIENTED_EDGE('',*,*,#104860,.F.); +#104882 = ORIENTED_EDGE('',*,*,#103805,.T.); +#104883 = ORIENTED_EDGE('',*,*,#104884,.T.); +#104884 = EDGE_CURVE('',#103798,#104885,#104887,.T.); +#104885 = VERTEX_POINT('',#104886); +#104886 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#104887 = LINE('',#104888,#104889); +#104888 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#104889 = VECTOR('',#104890,1.); +#104890 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104891 = ORIENTED_EDGE('',*,*,#104892,.F.); +#104892 = EDGE_CURVE('',#104861,#104885,#104893,.T.); +#104893 = LINE('',#104894,#104895); +#104894 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#104895 = VECTOR('',#104896,1.); +#104896 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104897 = PLANE('',#104898); +#104898 = AXIS2_PLACEMENT_3D('',#104899,#104900,#104901); +#104899 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#104900 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104901 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104902 = ADVANCED_FACE('',(#104903),#104921,.T.); +#104903 = FACE_BOUND('',#104904,.T.); +#104904 = EDGE_LOOP('',(#104905,#104906,#104907,#104915)); +#104905 = ORIENTED_EDGE('',*,*,#104884,.F.); +#104906 = ORIENTED_EDGE('',*,*,#103797,.T.); +#104907 = ORIENTED_EDGE('',*,*,#104908,.T.); +#104908 = EDGE_CURVE('',#103790,#104909,#104911,.T.); +#104909 = VERTEX_POINT('',#104910); +#104910 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#104911 = LINE('',#104912,#104913); +#104912 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#104913 = VECTOR('',#104914,1.); +#104914 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#104915 = ORIENTED_EDGE('',*,*,#104916,.F.); +#104916 = EDGE_CURVE('',#104885,#104909,#104917,.T.); +#104917 = LINE('',#104918,#104919); +#104918 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#104919 = VECTOR('',#104920,1.); +#104920 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#104921 = PLANE('',#104922); +#104922 = AXIS2_PLACEMENT_3D('',#104923,#104924,#104925); +#104923 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#104924 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#104925 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#104926 = ADVANCED_FACE('',(#104927),#104938,.T.); +#104927 = FACE_BOUND('',#104928,.T.); +#104928 = EDGE_LOOP('',(#104929,#104930,#104931,#104932)); +#104929 = ORIENTED_EDGE('',*,*,#104908,.F.); +#104930 = ORIENTED_EDGE('',*,*,#103789,.T.); +#104931 = ORIENTED_EDGE('',*,*,#104851,.T.); +#104932 = ORIENTED_EDGE('',*,*,#104933,.F.); +#104933 = EDGE_CURVE('',#104909,#104852,#104934,.T.); +#104934 = LINE('',#104935,#104936); +#104935 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#104936 = VECTOR('',#104937,1.); +#104937 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#104938 = PLANE('',#104939); +#104939 = AXIS2_PLACEMENT_3D('',#104940,#104941,#104942); +#104940 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#104941 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#104942 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#104943 = ADVANCED_FACE('',(#104944),#104969,.T.); +#104944 = FACE_BOUND('',#104945,.T.); +#104945 = EDGE_LOOP('',(#104946,#104954,#104955,#104963)); +#104946 = ORIENTED_EDGE('',*,*,#104947,.F.); +#104947 = EDGE_CURVE('',#103814,#104948,#104950,.T.); +#104948 = VERTEX_POINT('',#104949); +#104949 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#104950 = LINE('',#104951,#104952); +#104951 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#104952 = VECTOR('',#104953,1.); +#104953 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#104954 = ORIENTED_EDGE('',*,*,#103813,.T.); +#104955 = ORIENTED_EDGE('',*,*,#104956,.T.); +#104956 = EDGE_CURVE('',#103816,#104957,#104959,.T.); +#104957 = VERTEX_POINT('',#104958); +#104958 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#104959 = LINE('',#104960,#104961); +#104960 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#104961 = VECTOR('',#104962,1.); +#104962 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#104963 = ORIENTED_EDGE('',*,*,#104964,.F.); +#104964 = EDGE_CURVE('',#104948,#104957,#104965,.T.); +#104965 = LINE('',#104966,#104967); +#104966 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#104967 = VECTOR('',#104968,1.); +#104968 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#104969 = PLANE('',#104970); +#104970 = AXIS2_PLACEMENT_3D('',#104971,#104972,#104973); +#104971 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#104972 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#104973 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#104974 = ADVANCED_FACE('',(#104975),#104993,.T.); +#104975 = FACE_BOUND('',#104976,.T.); +#104976 = EDGE_LOOP('',(#104977,#104978,#104979,#104987)); +#104977 = ORIENTED_EDGE('',*,*,#104956,.F.); +#104978 = ORIENTED_EDGE('',*,*,#103839,.T.); +#104979 = ORIENTED_EDGE('',*,*,#104980,.T.); +#104980 = EDGE_CURVE('',#103832,#104981,#104983,.T.); +#104981 = VERTEX_POINT('',#104982); +#104982 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#104983 = LINE('',#104984,#104985); +#104984 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#104985 = VECTOR('',#104986,1.); +#104986 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#104987 = ORIENTED_EDGE('',*,*,#104988,.F.); +#104988 = EDGE_CURVE('',#104957,#104981,#104989,.T.); +#104989 = LINE('',#104990,#104991); +#104990 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#104991 = VECTOR('',#104992,1.); +#104992 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#104993 = PLANE('',#104994); +#104994 = AXIS2_PLACEMENT_3D('',#104995,#104996,#104997); +#104995 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#104996 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#104997 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#104998 = ADVANCED_FACE('',(#104999),#105017,.T.); +#104999 = FACE_BOUND('',#105000,.T.); +#105000 = EDGE_LOOP('',(#105001,#105002,#105003,#105011)); +#105001 = ORIENTED_EDGE('',*,*,#104980,.F.); +#105002 = ORIENTED_EDGE('',*,*,#103831,.T.); +#105003 = ORIENTED_EDGE('',*,*,#105004,.T.); +#105004 = EDGE_CURVE('',#103824,#105005,#105007,.T.); +#105005 = VERTEX_POINT('',#105006); +#105006 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#105007 = LINE('',#105008,#105009); +#105008 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#105009 = VECTOR('',#105010,1.); +#105010 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105011 = ORIENTED_EDGE('',*,*,#105012,.F.); +#105012 = EDGE_CURVE('',#104981,#105005,#105013,.T.); +#105013 = LINE('',#105014,#105015); +#105014 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#105015 = VECTOR('',#105016,1.); +#105016 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105017 = PLANE('',#105018); +#105018 = AXIS2_PLACEMENT_3D('',#105019,#105020,#105021); +#105019 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#105020 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105021 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105022 = ADVANCED_FACE('',(#105023),#105034,.T.); +#105023 = FACE_BOUND('',#105024,.T.); +#105024 = EDGE_LOOP('',(#105025,#105026,#105027,#105028)); +#105025 = ORIENTED_EDGE('',*,*,#105004,.F.); +#105026 = ORIENTED_EDGE('',*,*,#103823,.T.); +#105027 = ORIENTED_EDGE('',*,*,#104947,.T.); +#105028 = ORIENTED_EDGE('',*,*,#105029,.F.); +#105029 = EDGE_CURVE('',#105005,#104948,#105030,.T.); +#105030 = LINE('',#105031,#105032); +#105031 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#105032 = VECTOR('',#105033,1.); +#105033 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105034 = PLANE('',#105035); +#105035 = AXIS2_PLACEMENT_3D('',#105036,#105037,#105038); +#105036 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#105037 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105038 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105039 = ADVANCED_FACE('',(#105040),#105065,.T.); +#105040 = FACE_BOUND('',#105041,.T.); +#105041 = EDGE_LOOP('',(#105042,#105050,#105051,#105059)); +#105042 = ORIENTED_EDGE('',*,*,#105043,.F.); +#105043 = EDGE_CURVE('',#103848,#105044,#105046,.T.); +#105044 = VERTEX_POINT('',#105045); +#105045 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#105046 = LINE('',#105047,#105048); +#105047 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#105048 = VECTOR('',#105049,1.); +#105049 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#105050 = ORIENTED_EDGE('',*,*,#103847,.T.); +#105051 = ORIENTED_EDGE('',*,*,#105052,.T.); +#105052 = EDGE_CURVE('',#103850,#105053,#105055,.T.); +#105053 = VERTEX_POINT('',#105054); +#105054 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#105055 = LINE('',#105056,#105057); +#105056 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#105057 = VECTOR('',#105058,1.); +#105058 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#105059 = ORIENTED_EDGE('',*,*,#105060,.F.); +#105060 = EDGE_CURVE('',#105044,#105053,#105061,.T.); +#105061 = LINE('',#105062,#105063); +#105062 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#105063 = VECTOR('',#105064,1.); +#105064 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105065 = PLANE('',#105066); +#105066 = AXIS2_PLACEMENT_3D('',#105067,#105068,#105069); +#105067 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#105068 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#105069 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#105070 = ADVANCED_FACE('',(#105071),#105089,.T.); +#105071 = FACE_BOUND('',#105072,.T.); +#105072 = EDGE_LOOP('',(#105073,#105074,#105075,#105083)); +#105073 = ORIENTED_EDGE('',*,*,#105052,.F.); +#105074 = ORIENTED_EDGE('',*,*,#103873,.T.); +#105075 = ORIENTED_EDGE('',*,*,#105076,.T.); +#105076 = EDGE_CURVE('',#103866,#105077,#105079,.T.); +#105077 = VERTEX_POINT('',#105078); +#105078 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#105079 = LINE('',#105080,#105081); +#105080 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#105081 = VECTOR('',#105082,1.); +#105082 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#105083 = ORIENTED_EDGE('',*,*,#105084,.F.); +#105084 = EDGE_CURVE('',#105053,#105077,#105085,.T.); +#105085 = LINE('',#105086,#105087); +#105086 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#105087 = VECTOR('',#105088,1.); +#105088 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105089 = PLANE('',#105090); +#105090 = AXIS2_PLACEMENT_3D('',#105091,#105092,#105093); +#105091 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#105092 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#105093 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#105094 = ADVANCED_FACE('',(#105095),#105113,.T.); +#105095 = FACE_BOUND('',#105096,.T.); +#105096 = EDGE_LOOP('',(#105097,#105098,#105099,#105107)); +#105097 = ORIENTED_EDGE('',*,*,#105076,.F.); +#105098 = ORIENTED_EDGE('',*,*,#103865,.T.); +#105099 = ORIENTED_EDGE('',*,*,#105100,.T.); +#105100 = EDGE_CURVE('',#103858,#105101,#105103,.T.); +#105101 = VERTEX_POINT('',#105102); +#105102 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#105103 = LINE('',#105104,#105105); +#105104 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#105105 = VECTOR('',#105106,1.); +#105106 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105107 = ORIENTED_EDGE('',*,*,#105108,.F.); +#105108 = EDGE_CURVE('',#105077,#105101,#105109,.T.); +#105109 = LINE('',#105110,#105111); +#105110 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#105111 = VECTOR('',#105112,1.); +#105112 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105113 = PLANE('',#105114); +#105114 = AXIS2_PLACEMENT_3D('',#105115,#105116,#105117); +#105115 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#105116 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105117 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105118 = ADVANCED_FACE('',(#105119),#105130,.T.); +#105119 = FACE_BOUND('',#105120,.T.); +#105120 = EDGE_LOOP('',(#105121,#105122,#105123,#105124)); +#105121 = ORIENTED_EDGE('',*,*,#105100,.F.); +#105122 = ORIENTED_EDGE('',*,*,#103857,.T.); +#105123 = ORIENTED_EDGE('',*,*,#105043,.T.); +#105124 = ORIENTED_EDGE('',*,*,#105125,.F.); +#105125 = EDGE_CURVE('',#105101,#105044,#105126,.T.); +#105126 = LINE('',#105127,#105128); +#105127 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#105128 = VECTOR('',#105129,1.); +#105129 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105130 = PLANE('',#105131); +#105131 = AXIS2_PLACEMENT_3D('',#105132,#105133,#105134); +#105132 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#105133 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105134 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105135 = ADVANCED_FACE('',(#105136),#105161,.T.); +#105136 = FACE_BOUND('',#105137,.T.); +#105137 = EDGE_LOOP('',(#105138,#105146,#105147,#105155)); +#105138 = ORIENTED_EDGE('',*,*,#105139,.F.); +#105139 = EDGE_CURVE('',#103882,#105140,#105142,.T.); +#105140 = VERTEX_POINT('',#105141); +#105141 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#105142 = LINE('',#105143,#105144); +#105143 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#105144 = VECTOR('',#105145,1.); +#105145 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#105146 = ORIENTED_EDGE('',*,*,#103881,.T.); +#105147 = ORIENTED_EDGE('',*,*,#105148,.T.); +#105148 = EDGE_CURVE('',#103884,#105149,#105151,.T.); +#105149 = VERTEX_POINT('',#105150); +#105150 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#105151 = LINE('',#105152,#105153); +#105152 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#105153 = VECTOR('',#105154,1.); +#105154 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#105155 = ORIENTED_EDGE('',*,*,#105156,.F.); +#105156 = EDGE_CURVE('',#105140,#105149,#105157,.T.); +#105157 = LINE('',#105158,#105159); +#105158 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#105159 = VECTOR('',#105160,1.); +#105160 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105161 = PLANE('',#105162); +#105162 = AXIS2_PLACEMENT_3D('',#105163,#105164,#105165); +#105163 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#105164 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#105165 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#105166 = ADVANCED_FACE('',(#105167),#105185,.T.); +#105167 = FACE_BOUND('',#105168,.T.); +#105168 = EDGE_LOOP('',(#105169,#105170,#105171,#105179)); +#105169 = ORIENTED_EDGE('',*,*,#105148,.F.); +#105170 = ORIENTED_EDGE('',*,*,#103907,.T.); +#105171 = ORIENTED_EDGE('',*,*,#105172,.T.); +#105172 = EDGE_CURVE('',#103900,#105173,#105175,.T.); +#105173 = VERTEX_POINT('',#105174); +#105174 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#105175 = LINE('',#105176,#105177); +#105176 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#105177 = VECTOR('',#105178,1.); +#105178 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#105179 = ORIENTED_EDGE('',*,*,#105180,.F.); +#105180 = EDGE_CURVE('',#105149,#105173,#105181,.T.); +#105181 = LINE('',#105182,#105183); +#105182 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#105183 = VECTOR('',#105184,1.); +#105184 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105185 = PLANE('',#105186); +#105186 = AXIS2_PLACEMENT_3D('',#105187,#105188,#105189); +#105187 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#105188 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#105189 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#105190 = ADVANCED_FACE('',(#105191),#105209,.T.); +#105191 = FACE_BOUND('',#105192,.T.); +#105192 = EDGE_LOOP('',(#105193,#105194,#105195,#105203)); +#105193 = ORIENTED_EDGE('',*,*,#105172,.F.); +#105194 = ORIENTED_EDGE('',*,*,#103899,.T.); +#105195 = ORIENTED_EDGE('',*,*,#105196,.T.); +#105196 = EDGE_CURVE('',#103892,#105197,#105199,.T.); +#105197 = VERTEX_POINT('',#105198); +#105198 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#105199 = LINE('',#105200,#105201); +#105200 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#105201 = VECTOR('',#105202,1.); +#105202 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105203 = ORIENTED_EDGE('',*,*,#105204,.F.); +#105204 = EDGE_CURVE('',#105173,#105197,#105205,.T.); +#105205 = LINE('',#105206,#105207); +#105206 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#105207 = VECTOR('',#105208,1.); +#105208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105209 = PLANE('',#105210); +#105210 = AXIS2_PLACEMENT_3D('',#105211,#105212,#105213); +#105211 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#105212 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105213 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105214 = ADVANCED_FACE('',(#105215),#105226,.T.); +#105215 = FACE_BOUND('',#105216,.T.); +#105216 = EDGE_LOOP('',(#105217,#105218,#105219,#105220)); +#105217 = ORIENTED_EDGE('',*,*,#105196,.F.); +#105218 = ORIENTED_EDGE('',*,*,#103891,.T.); +#105219 = ORIENTED_EDGE('',*,*,#105139,.T.); +#105220 = ORIENTED_EDGE('',*,*,#105221,.F.); +#105221 = EDGE_CURVE('',#105197,#105140,#105222,.T.); +#105222 = LINE('',#105223,#105224); +#105223 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#105224 = VECTOR('',#105225,1.); +#105225 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105226 = PLANE('',#105227); +#105227 = AXIS2_PLACEMENT_3D('',#105228,#105229,#105230); +#105228 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#105229 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105230 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105231 = ADVANCED_FACE('',(#105232),#105257,.T.); +#105232 = FACE_BOUND('',#105233,.T.); +#105233 = EDGE_LOOP('',(#105234,#105242,#105243,#105251)); +#105234 = ORIENTED_EDGE('',*,*,#105235,.F.); +#105235 = EDGE_CURVE('',#103916,#105236,#105238,.T.); +#105236 = VERTEX_POINT('',#105237); +#105237 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#105238 = LINE('',#105239,#105240); +#105239 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#105240 = VECTOR('',#105241,1.); +#105241 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#105242 = ORIENTED_EDGE('',*,*,#103915,.T.); +#105243 = ORIENTED_EDGE('',*,*,#105244,.T.); +#105244 = EDGE_CURVE('',#103918,#105245,#105247,.T.); +#105245 = VERTEX_POINT('',#105246); +#105246 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#105247 = LINE('',#105248,#105249); +#105248 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#105249 = VECTOR('',#105250,1.); +#105250 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#105251 = ORIENTED_EDGE('',*,*,#105252,.F.); +#105252 = EDGE_CURVE('',#105236,#105245,#105253,.T.); +#105253 = LINE('',#105254,#105255); +#105254 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#105255 = VECTOR('',#105256,1.); +#105256 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105257 = PLANE('',#105258); +#105258 = AXIS2_PLACEMENT_3D('',#105259,#105260,#105261); +#105259 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#105260 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#105261 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#105262 = ADVANCED_FACE('',(#105263),#105281,.T.); +#105263 = FACE_BOUND('',#105264,.T.); +#105264 = EDGE_LOOP('',(#105265,#105266,#105267,#105275)); +#105265 = ORIENTED_EDGE('',*,*,#105244,.F.); +#105266 = ORIENTED_EDGE('',*,*,#103941,.T.); +#105267 = ORIENTED_EDGE('',*,*,#105268,.T.); +#105268 = EDGE_CURVE('',#103934,#105269,#105271,.T.); +#105269 = VERTEX_POINT('',#105270); +#105270 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#105271 = LINE('',#105272,#105273); +#105272 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#105273 = VECTOR('',#105274,1.); +#105274 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#105275 = ORIENTED_EDGE('',*,*,#105276,.F.); +#105276 = EDGE_CURVE('',#105245,#105269,#105277,.T.); +#105277 = LINE('',#105278,#105279); +#105278 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#105279 = VECTOR('',#105280,1.); +#105280 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105281 = PLANE('',#105282); +#105282 = AXIS2_PLACEMENT_3D('',#105283,#105284,#105285); +#105283 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#105284 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#105285 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#105286 = ADVANCED_FACE('',(#105287),#105305,.T.); +#105287 = FACE_BOUND('',#105288,.T.); +#105288 = EDGE_LOOP('',(#105289,#105290,#105291,#105299)); +#105289 = ORIENTED_EDGE('',*,*,#105268,.F.); +#105290 = ORIENTED_EDGE('',*,*,#103933,.T.); +#105291 = ORIENTED_EDGE('',*,*,#105292,.T.); +#105292 = EDGE_CURVE('',#103926,#105293,#105295,.T.); +#105293 = VERTEX_POINT('',#105294); +#105294 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#105295 = LINE('',#105296,#105297); +#105296 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#105297 = VECTOR('',#105298,1.); +#105298 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#105299 = ORIENTED_EDGE('',*,*,#105300,.F.); +#105300 = EDGE_CURVE('',#105269,#105293,#105301,.T.); +#105301 = LINE('',#105302,#105303); +#105302 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#105303 = VECTOR('',#105304,1.); +#105304 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105305 = PLANE('',#105306); +#105306 = AXIS2_PLACEMENT_3D('',#105307,#105308,#105309); +#105307 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#105308 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#105309 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#105310 = ADVANCED_FACE('',(#105311),#105322,.T.); +#105311 = FACE_BOUND('',#105312,.T.); +#105312 = EDGE_LOOP('',(#105313,#105314,#105315,#105316)); +#105313 = ORIENTED_EDGE('',*,*,#105292,.F.); +#105314 = ORIENTED_EDGE('',*,*,#103925,.T.); +#105315 = ORIENTED_EDGE('',*,*,#105235,.T.); +#105316 = ORIENTED_EDGE('',*,*,#105317,.F.); +#105317 = EDGE_CURVE('',#105293,#105236,#105318,.T.); +#105318 = LINE('',#105319,#105320); +#105319 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#105320 = VECTOR('',#105321,1.); +#105321 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105322 = PLANE('',#105323); +#105323 = AXIS2_PLACEMENT_3D('',#105324,#105325,#105326); +#105324 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#105325 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#105326 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#105327 = ADVANCED_FACE('',(#105328),#105339,.T.); +#105328 = FACE_BOUND('',#105329,.T.); +#105329 = EDGE_LOOP('',(#105330,#105331,#105332,#105338)); +#105330 = ORIENTED_EDGE('',*,*,#104005,.F.); +#105331 = ORIENTED_EDGE('',*,*,#104015,.T.); +#105332 = ORIENTED_EDGE('',*,*,#105333,.T.); +#105333 = EDGE_CURVE('',#104016,#104056,#105334,.T.); +#105334 = LINE('',#105335,#105336); +#105335 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#105336 = VECTOR('',#105337,1.); +#105337 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105338 = ORIENTED_EDGE('',*,*,#104063,.T.); +#105339 = PLANE('',#105340); +#105340 = AXIS2_PLACEMENT_3D('',#105341,#105342,#105343); +#105341 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#105342 = DIRECTION('',(0.,-0.,-1.)); +#105343 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105344 = ADVANCED_FACE('',(#105345),#105386,.F.); +#105345 = FACE_BOUND('',#105346,.F.); +#105346 = EDGE_LOOP('',(#105347,#105355,#105356,#105364,#105372,#105380) + ); +#105347 = ORIENTED_EDGE('',*,*,#105348,.T.); +#105348 = EDGE_CURVE('',#105349,#104056,#105351,.T.); +#105349 = VERTEX_POINT('',#105350); +#105350 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#105351 = LINE('',#105352,#105353); +#105352 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#105353 = VECTOR('',#105354,1.); +#105354 = DIRECTION('',(0.,0.,1.)); +#105355 = ORIENTED_EDGE('',*,*,#104055,.F.); +#105356 = ORIENTED_EDGE('',*,*,#105357,.T.); +#105357 = EDGE_CURVE('',#104048,#105358,#105360,.T.); +#105358 = VERTEX_POINT('',#105359); +#105359 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#105360 = LINE('',#105361,#105362); +#105361 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#105362 = VECTOR('',#105363,1.); +#105363 = DIRECTION('',(0.,0.,-1.)); +#105364 = ORIENTED_EDGE('',*,*,#105365,.T.); +#105365 = EDGE_CURVE('',#105358,#105366,#105368,.T.); +#105366 = VERTEX_POINT('',#105367); +#105367 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#105368 = LINE('',#105369,#105370); +#105369 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#105370 = VECTOR('',#105371,1.); +#105371 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105372 = ORIENTED_EDGE('',*,*,#105373,.T.); +#105373 = EDGE_CURVE('',#105366,#105374,#105376,.T.); +#105374 = VERTEX_POINT('',#105375); +#105375 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#105376 = LINE('',#105377,#105378); +#105377 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#105378 = VECTOR('',#105379,1.); +#105379 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105380 = ORIENTED_EDGE('',*,*,#105381,.T.); +#105381 = EDGE_CURVE('',#105374,#105349,#105382,.T.); +#105382 = LINE('',#105383,#105384); +#105383 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#105384 = VECTOR('',#105385,1.); +#105385 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105386 = PLANE('',#105387); +#105387 = AXIS2_PLACEMENT_3D('',#105388,#105389,#105390); +#105388 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#105389 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105390 = DIRECTION('',(0.,0.,1.)); +#105391 = ADVANCED_FACE('',(#105392),#105403,.T.); +#105392 = FACE_BOUND('',#105393,.T.); +#105393 = EDGE_LOOP('',(#105394,#105400,#105401,#105402)); +#105394 = ORIENTED_EDGE('',*,*,#105395,.F.); +#105395 = EDGE_CURVE('',#104024,#104048,#105396,.T.); +#105396 = LINE('',#105397,#105398); +#105397 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#105398 = VECTOR('',#105399,1.); +#105399 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105400 = ORIENTED_EDGE('',*,*,#104031,.T.); +#105401 = ORIENTED_EDGE('',*,*,#104039,.T.); +#105402 = ORIENTED_EDGE('',*,*,#104047,.T.); +#105403 = PLANE('',#105404); +#105404 = AXIS2_PLACEMENT_3D('',#105405,#105406,#105407); +#105405 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#105406 = DIRECTION('',(0.,-0.,-1.)); +#105407 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105408 = ADVANCED_FACE('',(#105409),#105450,.T.); +#105409 = FACE_BOUND('',#105410,.T.); +#105410 = EDGE_LOOP('',(#105411,#105419,#105420,#105428,#105436,#105444) + ); +#105411 = ORIENTED_EDGE('',*,*,#105412,.T.); +#105412 = EDGE_CURVE('',#105413,#104016,#105415,.T.); +#105413 = VERTEX_POINT('',#105414); +#105414 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#105415 = LINE('',#105416,#105417); +#105416 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#105417 = VECTOR('',#105418,1.); +#105418 = DIRECTION('',(0.,0.,1.)); +#105419 = ORIENTED_EDGE('',*,*,#104023,.F.); +#105420 = ORIENTED_EDGE('',*,*,#105421,.T.); +#105421 = EDGE_CURVE('',#104024,#105422,#105424,.T.); +#105422 = VERTEX_POINT('',#105423); +#105423 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#105424 = LINE('',#105425,#105426); +#105425 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#105426 = VECTOR('',#105427,1.); +#105427 = DIRECTION('',(0.,0.,-1.)); +#105428 = ORIENTED_EDGE('',*,*,#105429,.T.); +#105429 = EDGE_CURVE('',#105422,#105430,#105432,.T.); +#105430 = VERTEX_POINT('',#105431); +#105431 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#105432 = LINE('',#105433,#105434); +#105433 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#105434 = VECTOR('',#105435,1.); +#105435 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105436 = ORIENTED_EDGE('',*,*,#105437,.F.); +#105437 = EDGE_CURVE('',#105438,#105430,#105440,.T.); +#105438 = VERTEX_POINT('',#105439); +#105439 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#105440 = LINE('',#105441,#105442); +#105441 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#105442 = VECTOR('',#105443,1.); +#105443 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105444 = ORIENTED_EDGE('',*,*,#105445,.T.); +#105445 = EDGE_CURVE('',#105438,#105413,#105446,.T.); +#105446 = LINE('',#105447,#105448); +#105447 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#105448 = VECTOR('',#105449,1.); +#105449 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105450 = PLANE('',#105451); +#105451 = AXIS2_PLACEMENT_3D('',#105452,#105453,#105454); +#105452 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#105453 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105454 = DIRECTION('',(0.,0.,1.)); +#105455 = ADVANCED_FACE('',(#105456),#105467,.T.); +#105456 = FACE_BOUND('',#105457,.T.); +#105457 = EDGE_LOOP('',(#105458,#105459,#105460,#105466)); +#105458 = ORIENTED_EDGE('',*,*,#104071,.F.); +#105459 = ORIENTED_EDGE('',*,*,#104081,.T.); +#105460 = ORIENTED_EDGE('',*,*,#105461,.T.); +#105461 = EDGE_CURVE('',#104082,#104122,#105462,.T.); +#105462 = LINE('',#105463,#105464); +#105463 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#105464 = VECTOR('',#105465,1.); +#105465 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105466 = ORIENTED_EDGE('',*,*,#104129,.T.); +#105467 = PLANE('',#105468); +#105468 = AXIS2_PLACEMENT_3D('',#105469,#105470,#105471); +#105469 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#105470 = DIRECTION('',(0.,-0.,-1.)); +#105471 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105472 = ADVANCED_FACE('',(#105473),#105514,.F.); +#105473 = FACE_BOUND('',#105474,.F.); +#105474 = EDGE_LOOP('',(#105475,#105483,#105484,#105492,#105500,#105508) + ); +#105475 = ORIENTED_EDGE('',*,*,#105476,.T.); +#105476 = EDGE_CURVE('',#105477,#104122,#105479,.T.); +#105477 = VERTEX_POINT('',#105478); +#105478 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#105479 = LINE('',#105480,#105481); +#105480 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#105481 = VECTOR('',#105482,1.); +#105482 = DIRECTION('',(0.,0.,1.)); +#105483 = ORIENTED_EDGE('',*,*,#104121,.F.); +#105484 = ORIENTED_EDGE('',*,*,#105485,.T.); +#105485 = EDGE_CURVE('',#104114,#105486,#105488,.T.); +#105486 = VERTEX_POINT('',#105487); +#105487 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#105488 = LINE('',#105489,#105490); +#105489 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#105490 = VECTOR('',#105491,1.); +#105491 = DIRECTION('',(0.,0.,-1.)); +#105492 = ORIENTED_EDGE('',*,*,#105493,.T.); +#105493 = EDGE_CURVE('',#105486,#105494,#105496,.T.); +#105494 = VERTEX_POINT('',#105495); +#105495 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#105496 = LINE('',#105497,#105498); +#105497 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#105498 = VECTOR('',#105499,1.); +#105499 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105500 = ORIENTED_EDGE('',*,*,#105501,.T.); +#105501 = EDGE_CURVE('',#105494,#105502,#105504,.T.); +#105502 = VERTEX_POINT('',#105503); +#105503 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#105504 = LINE('',#105505,#105506); +#105505 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#105506 = VECTOR('',#105507,1.); +#105507 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105508 = ORIENTED_EDGE('',*,*,#105509,.T.); +#105509 = EDGE_CURVE('',#105502,#105477,#105510,.T.); +#105510 = LINE('',#105511,#105512); +#105511 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#105512 = VECTOR('',#105513,1.); +#105513 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105514 = PLANE('',#105515); +#105515 = AXIS2_PLACEMENT_3D('',#105516,#105517,#105518); +#105516 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#105517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105518 = DIRECTION('',(0.,0.,1.)); +#105519 = ADVANCED_FACE('',(#105520),#105531,.T.); +#105520 = FACE_BOUND('',#105521,.T.); +#105521 = EDGE_LOOP('',(#105522,#105528,#105529,#105530)); +#105522 = ORIENTED_EDGE('',*,*,#105523,.F.); +#105523 = EDGE_CURVE('',#104090,#104114,#105524,.T.); +#105524 = LINE('',#105525,#105526); +#105525 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#105526 = VECTOR('',#105527,1.); +#105527 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105528 = ORIENTED_EDGE('',*,*,#104097,.T.); +#105529 = ORIENTED_EDGE('',*,*,#104105,.T.); +#105530 = ORIENTED_EDGE('',*,*,#104113,.T.); +#105531 = PLANE('',#105532); +#105532 = AXIS2_PLACEMENT_3D('',#105533,#105534,#105535); +#105533 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#105534 = DIRECTION('',(0.,-0.,-1.)); +#105535 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105536 = ADVANCED_FACE('',(#105537),#105578,.T.); +#105537 = FACE_BOUND('',#105538,.T.); +#105538 = EDGE_LOOP('',(#105539,#105547,#105548,#105556,#105564,#105572) + ); +#105539 = ORIENTED_EDGE('',*,*,#105540,.T.); +#105540 = EDGE_CURVE('',#105541,#104082,#105543,.T.); +#105541 = VERTEX_POINT('',#105542); +#105542 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#105543 = LINE('',#105544,#105545); +#105544 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#105545 = VECTOR('',#105546,1.); +#105546 = DIRECTION('',(0.,0.,1.)); +#105547 = ORIENTED_EDGE('',*,*,#104089,.F.); +#105548 = ORIENTED_EDGE('',*,*,#105549,.T.); +#105549 = EDGE_CURVE('',#104090,#105550,#105552,.T.); +#105550 = VERTEX_POINT('',#105551); +#105551 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#105552 = LINE('',#105553,#105554); +#105553 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#105554 = VECTOR('',#105555,1.); +#105555 = DIRECTION('',(0.,0.,-1.)); +#105556 = ORIENTED_EDGE('',*,*,#105557,.T.); +#105557 = EDGE_CURVE('',#105550,#105558,#105560,.T.); +#105558 = VERTEX_POINT('',#105559); +#105559 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#105560 = LINE('',#105561,#105562); +#105561 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#105562 = VECTOR('',#105563,1.); +#105563 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105564 = ORIENTED_EDGE('',*,*,#105565,.F.); +#105565 = EDGE_CURVE('',#105566,#105558,#105568,.T.); +#105566 = VERTEX_POINT('',#105567); +#105567 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#105568 = LINE('',#105569,#105570); +#105569 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#105570 = VECTOR('',#105571,1.); +#105571 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105572 = ORIENTED_EDGE('',*,*,#105573,.T.); +#105573 = EDGE_CURVE('',#105566,#105541,#105574,.T.); +#105574 = LINE('',#105575,#105576); +#105575 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#105576 = VECTOR('',#105577,1.); +#105577 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105578 = PLANE('',#105579); +#105579 = AXIS2_PLACEMENT_3D('',#105580,#105581,#105582); +#105580 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#105581 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105582 = DIRECTION('',(0.,0.,1.)); +#105583 = ADVANCED_FACE('',(#105584),#105595,.T.); +#105584 = FACE_BOUND('',#105585,.T.); +#105585 = EDGE_LOOP('',(#105586,#105587,#105588,#105594)); +#105586 = ORIENTED_EDGE('',*,*,#104137,.F.); +#105587 = ORIENTED_EDGE('',*,*,#104147,.T.); +#105588 = ORIENTED_EDGE('',*,*,#105589,.T.); +#105589 = EDGE_CURVE('',#104148,#104188,#105590,.T.); +#105590 = LINE('',#105591,#105592); +#105591 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#105592 = VECTOR('',#105593,1.); +#105593 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105594 = ORIENTED_EDGE('',*,*,#104195,.T.); +#105595 = PLANE('',#105596); +#105596 = AXIS2_PLACEMENT_3D('',#105597,#105598,#105599); +#105597 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#105598 = DIRECTION('',(0.,-0.,-1.)); +#105599 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105600 = ADVANCED_FACE('',(#105601),#105642,.F.); +#105601 = FACE_BOUND('',#105602,.F.); +#105602 = EDGE_LOOP('',(#105603,#105611,#105612,#105620,#105628,#105636) + ); +#105603 = ORIENTED_EDGE('',*,*,#105604,.T.); +#105604 = EDGE_CURVE('',#105605,#104188,#105607,.T.); +#105605 = VERTEX_POINT('',#105606); +#105606 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#105607 = LINE('',#105608,#105609); +#105608 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#105609 = VECTOR('',#105610,1.); +#105610 = DIRECTION('',(0.,0.,1.)); +#105611 = ORIENTED_EDGE('',*,*,#104187,.F.); +#105612 = ORIENTED_EDGE('',*,*,#105613,.T.); +#105613 = EDGE_CURVE('',#104180,#105614,#105616,.T.); +#105614 = VERTEX_POINT('',#105615); +#105615 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#105616 = LINE('',#105617,#105618); +#105617 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#105618 = VECTOR('',#105619,1.); +#105619 = DIRECTION('',(0.,0.,-1.)); +#105620 = ORIENTED_EDGE('',*,*,#105621,.T.); +#105621 = EDGE_CURVE('',#105614,#105622,#105624,.T.); +#105622 = VERTEX_POINT('',#105623); +#105623 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#105624 = LINE('',#105625,#105626); +#105625 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#105626 = VECTOR('',#105627,1.); +#105627 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105628 = ORIENTED_EDGE('',*,*,#105629,.T.); +#105629 = EDGE_CURVE('',#105622,#105630,#105632,.T.); +#105630 = VERTEX_POINT('',#105631); +#105631 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#105632 = LINE('',#105633,#105634); +#105633 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#105634 = VECTOR('',#105635,1.); +#105635 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105636 = ORIENTED_EDGE('',*,*,#105637,.T.); +#105637 = EDGE_CURVE('',#105630,#105605,#105638,.T.); +#105638 = LINE('',#105639,#105640); +#105639 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#105640 = VECTOR('',#105641,1.); +#105641 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105642 = PLANE('',#105643); +#105643 = AXIS2_PLACEMENT_3D('',#105644,#105645,#105646); +#105644 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#105645 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105646 = DIRECTION('',(0.,0.,1.)); +#105647 = ADVANCED_FACE('',(#105648),#105659,.T.); +#105648 = FACE_BOUND('',#105649,.T.); +#105649 = EDGE_LOOP('',(#105650,#105656,#105657,#105658)); +#105650 = ORIENTED_EDGE('',*,*,#105651,.F.); +#105651 = EDGE_CURVE('',#104156,#104180,#105652,.T.); +#105652 = LINE('',#105653,#105654); +#105653 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#105654 = VECTOR('',#105655,1.); +#105655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105656 = ORIENTED_EDGE('',*,*,#104163,.T.); +#105657 = ORIENTED_EDGE('',*,*,#104171,.T.); +#105658 = ORIENTED_EDGE('',*,*,#104179,.T.); +#105659 = PLANE('',#105660); +#105660 = AXIS2_PLACEMENT_3D('',#105661,#105662,#105663); +#105661 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#105662 = DIRECTION('',(0.,-0.,-1.)); +#105663 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105664 = ADVANCED_FACE('',(#105665),#105706,.T.); +#105665 = FACE_BOUND('',#105666,.T.); +#105666 = EDGE_LOOP('',(#105667,#105675,#105676,#105684,#105692,#105700) + ); +#105667 = ORIENTED_EDGE('',*,*,#105668,.T.); +#105668 = EDGE_CURVE('',#105669,#104148,#105671,.T.); +#105669 = VERTEX_POINT('',#105670); +#105670 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#105671 = LINE('',#105672,#105673); +#105672 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#105673 = VECTOR('',#105674,1.); +#105674 = DIRECTION('',(0.,0.,1.)); +#105675 = ORIENTED_EDGE('',*,*,#104155,.F.); +#105676 = ORIENTED_EDGE('',*,*,#105677,.T.); +#105677 = EDGE_CURVE('',#104156,#105678,#105680,.T.); +#105678 = VERTEX_POINT('',#105679); +#105679 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#105680 = LINE('',#105681,#105682); +#105681 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#105682 = VECTOR('',#105683,1.); +#105683 = DIRECTION('',(0.,0.,-1.)); +#105684 = ORIENTED_EDGE('',*,*,#105685,.T.); +#105685 = EDGE_CURVE('',#105678,#105686,#105688,.T.); +#105686 = VERTEX_POINT('',#105687); +#105687 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#105688 = LINE('',#105689,#105690); +#105689 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#105690 = VECTOR('',#105691,1.); +#105691 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105692 = ORIENTED_EDGE('',*,*,#105693,.F.); +#105693 = EDGE_CURVE('',#105694,#105686,#105696,.T.); +#105694 = VERTEX_POINT('',#105695); +#105695 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#105696 = LINE('',#105697,#105698); +#105697 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#105698 = VECTOR('',#105699,1.); +#105699 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105700 = ORIENTED_EDGE('',*,*,#105701,.T.); +#105701 = EDGE_CURVE('',#105694,#105669,#105702,.T.); +#105702 = LINE('',#105703,#105704); +#105703 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#105704 = VECTOR('',#105705,1.); +#105705 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105706 = PLANE('',#105707); +#105707 = AXIS2_PLACEMENT_3D('',#105708,#105709,#105710); +#105708 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#105709 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105710 = DIRECTION('',(0.,0.,1.)); +#105711 = ADVANCED_FACE('',(#105712),#105723,.T.); +#105712 = FACE_BOUND('',#105713,.T.); +#105713 = EDGE_LOOP('',(#105714,#105715,#105716,#105722)); +#105714 = ORIENTED_EDGE('',*,*,#104203,.F.); +#105715 = ORIENTED_EDGE('',*,*,#104213,.T.); +#105716 = ORIENTED_EDGE('',*,*,#105717,.T.); +#105717 = EDGE_CURVE('',#104214,#104254,#105718,.T.); +#105718 = LINE('',#105719,#105720); +#105719 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#105720 = VECTOR('',#105721,1.); +#105721 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105722 = ORIENTED_EDGE('',*,*,#104261,.T.); +#105723 = PLANE('',#105724); +#105724 = AXIS2_PLACEMENT_3D('',#105725,#105726,#105727); +#105725 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#105726 = DIRECTION('',(0.,-0.,-1.)); +#105727 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105728 = ADVANCED_FACE('',(#105729),#105770,.F.); +#105729 = FACE_BOUND('',#105730,.F.); +#105730 = EDGE_LOOP('',(#105731,#105739,#105740,#105748,#105756,#105764) + ); +#105731 = ORIENTED_EDGE('',*,*,#105732,.T.); +#105732 = EDGE_CURVE('',#105733,#104254,#105735,.T.); +#105733 = VERTEX_POINT('',#105734); +#105734 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#105735 = LINE('',#105736,#105737); +#105736 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#105737 = VECTOR('',#105738,1.); +#105738 = DIRECTION('',(0.,0.,1.)); +#105739 = ORIENTED_EDGE('',*,*,#104253,.F.); +#105740 = ORIENTED_EDGE('',*,*,#105741,.T.); +#105741 = EDGE_CURVE('',#104246,#105742,#105744,.T.); +#105742 = VERTEX_POINT('',#105743); +#105743 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#105744 = LINE('',#105745,#105746); +#105745 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#105746 = VECTOR('',#105747,1.); +#105747 = DIRECTION('',(0.,0.,-1.)); +#105748 = ORIENTED_EDGE('',*,*,#105749,.T.); +#105749 = EDGE_CURVE('',#105742,#105750,#105752,.T.); +#105750 = VERTEX_POINT('',#105751); +#105751 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#105752 = LINE('',#105753,#105754); +#105753 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#105754 = VECTOR('',#105755,1.); +#105755 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105756 = ORIENTED_EDGE('',*,*,#105757,.T.); +#105757 = EDGE_CURVE('',#105750,#105758,#105760,.T.); +#105758 = VERTEX_POINT('',#105759); +#105759 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#105760 = LINE('',#105761,#105762); +#105761 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#105762 = VECTOR('',#105763,1.); +#105763 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105764 = ORIENTED_EDGE('',*,*,#105765,.T.); +#105765 = EDGE_CURVE('',#105758,#105733,#105766,.T.); +#105766 = LINE('',#105767,#105768); +#105767 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#105768 = VECTOR('',#105769,1.); +#105769 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105770 = PLANE('',#105771); +#105771 = AXIS2_PLACEMENT_3D('',#105772,#105773,#105774); +#105772 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#105773 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105774 = DIRECTION('',(0.,0.,1.)); +#105775 = ADVANCED_FACE('',(#105776),#105787,.T.); +#105776 = FACE_BOUND('',#105777,.T.); +#105777 = EDGE_LOOP('',(#105778,#105784,#105785,#105786)); +#105778 = ORIENTED_EDGE('',*,*,#105779,.F.); +#105779 = EDGE_CURVE('',#104222,#104246,#105780,.T.); +#105780 = LINE('',#105781,#105782); +#105781 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#105782 = VECTOR('',#105783,1.); +#105783 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105784 = ORIENTED_EDGE('',*,*,#104229,.T.); +#105785 = ORIENTED_EDGE('',*,*,#104237,.T.); +#105786 = ORIENTED_EDGE('',*,*,#104245,.T.); +#105787 = PLANE('',#105788); +#105788 = AXIS2_PLACEMENT_3D('',#105789,#105790,#105791); +#105789 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#105790 = DIRECTION('',(0.,-0.,-1.)); +#105791 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105792 = ADVANCED_FACE('',(#105793),#105834,.T.); +#105793 = FACE_BOUND('',#105794,.T.); +#105794 = EDGE_LOOP('',(#105795,#105803,#105804,#105812,#105820,#105828) + ); +#105795 = ORIENTED_EDGE('',*,*,#105796,.T.); +#105796 = EDGE_CURVE('',#105797,#104214,#105799,.T.); +#105797 = VERTEX_POINT('',#105798); +#105798 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#105799 = LINE('',#105800,#105801); +#105800 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#105801 = VECTOR('',#105802,1.); +#105802 = DIRECTION('',(0.,0.,1.)); +#105803 = ORIENTED_EDGE('',*,*,#104221,.F.); +#105804 = ORIENTED_EDGE('',*,*,#105805,.T.); +#105805 = EDGE_CURVE('',#104222,#105806,#105808,.T.); +#105806 = VERTEX_POINT('',#105807); +#105807 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#105808 = LINE('',#105809,#105810); +#105809 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#105810 = VECTOR('',#105811,1.); +#105811 = DIRECTION('',(0.,0.,-1.)); +#105812 = ORIENTED_EDGE('',*,*,#105813,.T.); +#105813 = EDGE_CURVE('',#105806,#105814,#105816,.T.); +#105814 = VERTEX_POINT('',#105815); +#105815 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#105816 = LINE('',#105817,#105818); +#105817 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#105818 = VECTOR('',#105819,1.); +#105819 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105820 = ORIENTED_EDGE('',*,*,#105821,.F.); +#105821 = EDGE_CURVE('',#105822,#105814,#105824,.T.); +#105822 = VERTEX_POINT('',#105823); +#105823 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#105824 = LINE('',#105825,#105826); +#105825 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#105826 = VECTOR('',#105827,1.); +#105827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105828 = ORIENTED_EDGE('',*,*,#105829,.T.); +#105829 = EDGE_CURVE('',#105822,#105797,#105830,.T.); +#105830 = LINE('',#105831,#105832); +#105831 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#105832 = VECTOR('',#105833,1.); +#105833 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105834 = PLANE('',#105835); +#105835 = AXIS2_PLACEMENT_3D('',#105836,#105837,#105838); +#105836 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#105837 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105838 = DIRECTION('',(0.,0.,1.)); +#105839 = ADVANCED_FACE('',(#105840),#105851,.T.); +#105840 = FACE_BOUND('',#105841,.T.); +#105841 = EDGE_LOOP('',(#105842,#105843,#105844,#105850)); +#105842 = ORIENTED_EDGE('',*,*,#104269,.F.); +#105843 = ORIENTED_EDGE('',*,*,#104279,.T.); +#105844 = ORIENTED_EDGE('',*,*,#105845,.T.); +#105845 = EDGE_CURVE('',#104280,#104320,#105846,.T.); +#105846 = LINE('',#105847,#105848); +#105847 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#105848 = VECTOR('',#105849,1.); +#105849 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105850 = ORIENTED_EDGE('',*,*,#104327,.T.); +#105851 = PLANE('',#105852); +#105852 = AXIS2_PLACEMENT_3D('',#105853,#105854,#105855); +#105853 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#105854 = DIRECTION('',(0.,-0.,-1.)); +#105855 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105856 = ADVANCED_FACE('',(#105857),#105898,.F.); +#105857 = FACE_BOUND('',#105858,.F.); +#105858 = EDGE_LOOP('',(#105859,#105867,#105868,#105876,#105884,#105892) + ); +#105859 = ORIENTED_EDGE('',*,*,#105860,.T.); +#105860 = EDGE_CURVE('',#105861,#104320,#105863,.T.); +#105861 = VERTEX_POINT('',#105862); +#105862 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#105863 = LINE('',#105864,#105865); +#105864 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#105865 = VECTOR('',#105866,1.); +#105866 = DIRECTION('',(0.,0.,1.)); +#105867 = ORIENTED_EDGE('',*,*,#104319,.F.); +#105868 = ORIENTED_EDGE('',*,*,#105869,.T.); +#105869 = EDGE_CURVE('',#104312,#105870,#105872,.T.); +#105870 = VERTEX_POINT('',#105871); +#105871 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#105872 = LINE('',#105873,#105874); +#105873 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#105874 = VECTOR('',#105875,1.); +#105875 = DIRECTION('',(0.,0.,-1.)); +#105876 = ORIENTED_EDGE('',*,*,#105877,.T.); +#105877 = EDGE_CURVE('',#105870,#105878,#105880,.T.); +#105878 = VERTEX_POINT('',#105879); +#105879 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#105880 = LINE('',#105881,#105882); +#105881 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#105882 = VECTOR('',#105883,1.); +#105883 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105884 = ORIENTED_EDGE('',*,*,#105885,.T.); +#105885 = EDGE_CURVE('',#105878,#105886,#105888,.T.); +#105886 = VERTEX_POINT('',#105887); +#105887 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#105888 = LINE('',#105889,#105890); +#105889 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#105890 = VECTOR('',#105891,1.); +#105891 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105892 = ORIENTED_EDGE('',*,*,#105893,.T.); +#105893 = EDGE_CURVE('',#105886,#105861,#105894,.T.); +#105894 = LINE('',#105895,#105896); +#105895 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#105896 = VECTOR('',#105897,1.); +#105897 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105898 = PLANE('',#105899); +#105899 = AXIS2_PLACEMENT_3D('',#105900,#105901,#105902); +#105900 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#105901 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105902 = DIRECTION('',(0.,0.,1.)); +#105903 = ADVANCED_FACE('',(#105904),#105915,.T.); +#105904 = FACE_BOUND('',#105905,.T.); +#105905 = EDGE_LOOP('',(#105906,#105912,#105913,#105914)); +#105906 = ORIENTED_EDGE('',*,*,#105907,.F.); +#105907 = EDGE_CURVE('',#104288,#104312,#105908,.T.); +#105908 = LINE('',#105909,#105910); +#105909 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#105910 = VECTOR('',#105911,1.); +#105911 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105912 = ORIENTED_EDGE('',*,*,#104295,.T.); +#105913 = ORIENTED_EDGE('',*,*,#104303,.T.); +#105914 = ORIENTED_EDGE('',*,*,#104311,.T.); +#105915 = PLANE('',#105916); +#105916 = AXIS2_PLACEMENT_3D('',#105917,#105918,#105919); +#105917 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#105918 = DIRECTION('',(0.,-0.,-1.)); +#105919 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105920 = ADVANCED_FACE('',(#105921),#105962,.T.); +#105921 = FACE_BOUND('',#105922,.T.); +#105922 = EDGE_LOOP('',(#105923,#105931,#105932,#105940,#105948,#105956) + ); +#105923 = ORIENTED_EDGE('',*,*,#105924,.T.); +#105924 = EDGE_CURVE('',#105925,#104280,#105927,.T.); +#105925 = VERTEX_POINT('',#105926); +#105926 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#105927 = LINE('',#105928,#105929); +#105928 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#105929 = VECTOR('',#105930,1.); +#105930 = DIRECTION('',(0.,0.,1.)); +#105931 = ORIENTED_EDGE('',*,*,#104287,.F.); +#105932 = ORIENTED_EDGE('',*,*,#105933,.T.); +#105933 = EDGE_CURVE('',#104288,#105934,#105936,.T.); +#105934 = VERTEX_POINT('',#105935); +#105935 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#105936 = LINE('',#105937,#105938); +#105937 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#105938 = VECTOR('',#105939,1.); +#105939 = DIRECTION('',(0.,0.,-1.)); +#105940 = ORIENTED_EDGE('',*,*,#105941,.T.); +#105941 = EDGE_CURVE('',#105934,#105942,#105944,.T.); +#105942 = VERTEX_POINT('',#105943); +#105943 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#105944 = LINE('',#105945,#105946); +#105945 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#105946 = VECTOR('',#105947,1.); +#105947 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#105948 = ORIENTED_EDGE('',*,*,#105949,.F.); +#105949 = EDGE_CURVE('',#105950,#105942,#105952,.T.); +#105950 = VERTEX_POINT('',#105951); +#105951 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#105952 = LINE('',#105953,#105954); +#105953 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#105954 = VECTOR('',#105955,1.); +#105955 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#105956 = ORIENTED_EDGE('',*,*,#105957,.T.); +#105957 = EDGE_CURVE('',#105950,#105925,#105958,.T.); +#105958 = LINE('',#105959,#105960); +#105959 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#105960 = VECTOR('',#105961,1.); +#105961 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#105962 = PLANE('',#105963); +#105963 = AXIS2_PLACEMENT_3D('',#105964,#105965,#105966); +#105964 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#105965 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#105966 = DIRECTION('',(0.,0.,1.)); +#105967 = ADVANCED_FACE('',(#105968),#105979,.T.); +#105968 = FACE_BOUND('',#105969,.T.); +#105969 = EDGE_LOOP('',(#105970,#105971,#105972,#105978)); +#105970 = ORIENTED_EDGE('',*,*,#104335,.F.); +#105971 = ORIENTED_EDGE('',*,*,#104345,.T.); +#105972 = ORIENTED_EDGE('',*,*,#105973,.T.); +#105973 = EDGE_CURVE('',#104346,#104386,#105974,.T.); +#105974 = LINE('',#105975,#105976); +#105975 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#105976 = VECTOR('',#105977,1.); +#105977 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#105978 = ORIENTED_EDGE('',*,*,#104393,.T.); +#105979 = PLANE('',#105980); +#105980 = AXIS2_PLACEMENT_3D('',#105981,#105982,#105983); +#105981 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#105982 = DIRECTION('',(0.,-0.,-1.)); +#105983 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#105984 = ADVANCED_FACE('',(#105985),#106026,.F.); +#105985 = FACE_BOUND('',#105986,.F.); +#105986 = EDGE_LOOP('',(#105987,#105995,#105996,#106004,#106012,#106020) + ); +#105987 = ORIENTED_EDGE('',*,*,#105988,.T.); +#105988 = EDGE_CURVE('',#105989,#104386,#105991,.T.); +#105989 = VERTEX_POINT('',#105990); +#105990 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#105991 = LINE('',#105992,#105993); +#105992 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#105993 = VECTOR('',#105994,1.); +#105994 = DIRECTION('',(0.,0.,1.)); +#105995 = ORIENTED_EDGE('',*,*,#104385,.F.); +#105996 = ORIENTED_EDGE('',*,*,#105997,.T.); +#105997 = EDGE_CURVE('',#104378,#105998,#106000,.T.); +#105998 = VERTEX_POINT('',#105999); +#105999 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#106000 = LINE('',#106001,#106002); +#106001 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#106002 = VECTOR('',#106003,1.); +#106003 = DIRECTION('',(0.,0.,-1.)); +#106004 = ORIENTED_EDGE('',*,*,#106005,.T.); +#106005 = EDGE_CURVE('',#105998,#106006,#106008,.T.); +#106006 = VERTEX_POINT('',#106007); +#106007 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#106008 = LINE('',#106009,#106010); +#106009 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#106010 = VECTOR('',#106011,1.); +#106011 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106012 = ORIENTED_EDGE('',*,*,#106013,.T.); +#106013 = EDGE_CURVE('',#106006,#106014,#106016,.T.); +#106014 = VERTEX_POINT('',#106015); +#106015 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#106016 = LINE('',#106017,#106018); +#106017 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#106018 = VECTOR('',#106019,1.); +#106019 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106020 = ORIENTED_EDGE('',*,*,#106021,.T.); +#106021 = EDGE_CURVE('',#106014,#105989,#106022,.T.); +#106022 = LINE('',#106023,#106024); +#106023 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#106024 = VECTOR('',#106025,1.); +#106025 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106026 = PLANE('',#106027); +#106027 = AXIS2_PLACEMENT_3D('',#106028,#106029,#106030); +#106028 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#106029 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106030 = DIRECTION('',(0.,0.,1.)); +#106031 = ADVANCED_FACE('',(#106032),#106043,.T.); +#106032 = FACE_BOUND('',#106033,.T.); +#106033 = EDGE_LOOP('',(#106034,#106040,#106041,#106042)); +#106034 = ORIENTED_EDGE('',*,*,#106035,.F.); +#106035 = EDGE_CURVE('',#104354,#104378,#106036,.T.); +#106036 = LINE('',#106037,#106038); +#106037 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#106038 = VECTOR('',#106039,1.); +#106039 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106040 = ORIENTED_EDGE('',*,*,#104361,.T.); +#106041 = ORIENTED_EDGE('',*,*,#104369,.T.); +#106042 = ORIENTED_EDGE('',*,*,#104377,.T.); +#106043 = PLANE('',#106044); +#106044 = AXIS2_PLACEMENT_3D('',#106045,#106046,#106047); +#106045 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#106046 = DIRECTION('',(0.,-0.,-1.)); +#106047 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106048 = ADVANCED_FACE('',(#106049),#106090,.T.); +#106049 = FACE_BOUND('',#106050,.T.); +#106050 = EDGE_LOOP('',(#106051,#106059,#106060,#106068,#106076,#106084) + ); +#106051 = ORIENTED_EDGE('',*,*,#106052,.T.); +#106052 = EDGE_CURVE('',#106053,#104346,#106055,.T.); +#106053 = VERTEX_POINT('',#106054); +#106054 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#106055 = LINE('',#106056,#106057); +#106056 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#106057 = VECTOR('',#106058,1.); +#106058 = DIRECTION('',(0.,0.,1.)); +#106059 = ORIENTED_EDGE('',*,*,#104353,.F.); +#106060 = ORIENTED_EDGE('',*,*,#106061,.T.); +#106061 = EDGE_CURVE('',#104354,#106062,#106064,.T.); +#106062 = VERTEX_POINT('',#106063); +#106063 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#106064 = LINE('',#106065,#106066); +#106065 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#106066 = VECTOR('',#106067,1.); +#106067 = DIRECTION('',(0.,0.,-1.)); +#106068 = ORIENTED_EDGE('',*,*,#106069,.T.); +#106069 = EDGE_CURVE('',#106062,#106070,#106072,.T.); +#106070 = VERTEX_POINT('',#106071); +#106071 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#106072 = LINE('',#106073,#106074); +#106073 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#106074 = VECTOR('',#106075,1.); +#106075 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106076 = ORIENTED_EDGE('',*,*,#106077,.F.); +#106077 = EDGE_CURVE('',#106078,#106070,#106080,.T.); +#106078 = VERTEX_POINT('',#106079); +#106079 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#106080 = LINE('',#106081,#106082); +#106081 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#106082 = VECTOR('',#106083,1.); +#106083 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106084 = ORIENTED_EDGE('',*,*,#106085,.T.); +#106085 = EDGE_CURVE('',#106078,#106053,#106086,.T.); +#106086 = LINE('',#106087,#106088); +#106087 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#106088 = VECTOR('',#106089,1.); +#106089 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106090 = PLANE('',#106091); +#106091 = AXIS2_PLACEMENT_3D('',#106092,#106093,#106094); +#106092 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#106093 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106094 = DIRECTION('',(0.,0.,1.)); +#106095 = ADVANCED_FACE('',(#106096),#106107,.T.); +#106096 = FACE_BOUND('',#106097,.T.); +#106097 = EDGE_LOOP('',(#106098,#106099,#106100,#106106)); +#106098 = ORIENTED_EDGE('',*,*,#104401,.F.); +#106099 = ORIENTED_EDGE('',*,*,#104411,.T.); +#106100 = ORIENTED_EDGE('',*,*,#106101,.T.); +#106101 = EDGE_CURVE('',#104412,#104452,#106102,.T.); +#106102 = LINE('',#106103,#106104); +#106103 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#106104 = VECTOR('',#106105,1.); +#106105 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106106 = ORIENTED_EDGE('',*,*,#104459,.T.); +#106107 = PLANE('',#106108); +#106108 = AXIS2_PLACEMENT_3D('',#106109,#106110,#106111); +#106109 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#106110 = DIRECTION('',(0.,-0.,-1.)); +#106111 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106112 = ADVANCED_FACE('',(#106113),#106154,.F.); +#106113 = FACE_BOUND('',#106114,.F.); +#106114 = EDGE_LOOP('',(#106115,#106123,#106124,#106132,#106140,#106148) + ); +#106115 = ORIENTED_EDGE('',*,*,#106116,.T.); +#106116 = EDGE_CURVE('',#106117,#104452,#106119,.T.); +#106117 = VERTEX_POINT('',#106118); +#106118 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#106119 = LINE('',#106120,#106121); +#106120 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#106121 = VECTOR('',#106122,1.); +#106122 = DIRECTION('',(0.,0.,1.)); +#106123 = ORIENTED_EDGE('',*,*,#104451,.F.); +#106124 = ORIENTED_EDGE('',*,*,#106125,.T.); +#106125 = EDGE_CURVE('',#104444,#106126,#106128,.T.); +#106126 = VERTEX_POINT('',#106127); +#106127 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#106128 = LINE('',#106129,#106130); +#106129 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#106130 = VECTOR('',#106131,1.); +#106131 = DIRECTION('',(0.,0.,-1.)); +#106132 = ORIENTED_EDGE('',*,*,#106133,.T.); +#106133 = EDGE_CURVE('',#106126,#106134,#106136,.T.); +#106134 = VERTEX_POINT('',#106135); +#106135 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#106136 = LINE('',#106137,#106138); +#106137 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#106138 = VECTOR('',#106139,1.); +#106139 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106140 = ORIENTED_EDGE('',*,*,#106141,.T.); +#106141 = EDGE_CURVE('',#106134,#106142,#106144,.T.); +#106142 = VERTEX_POINT('',#106143); +#106143 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#106144 = LINE('',#106145,#106146); +#106145 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#106146 = VECTOR('',#106147,1.); +#106147 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106148 = ORIENTED_EDGE('',*,*,#106149,.T.); +#106149 = EDGE_CURVE('',#106142,#106117,#106150,.T.); +#106150 = LINE('',#106151,#106152); +#106151 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#106152 = VECTOR('',#106153,1.); +#106153 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106154 = PLANE('',#106155); +#106155 = AXIS2_PLACEMENT_3D('',#106156,#106157,#106158); +#106156 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#106157 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106158 = DIRECTION('',(0.,0.,1.)); +#106159 = ADVANCED_FACE('',(#106160),#106171,.T.); +#106160 = FACE_BOUND('',#106161,.T.); +#106161 = EDGE_LOOP('',(#106162,#106168,#106169,#106170)); +#106162 = ORIENTED_EDGE('',*,*,#106163,.F.); +#106163 = EDGE_CURVE('',#104420,#104444,#106164,.T.); +#106164 = LINE('',#106165,#106166); +#106165 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#106166 = VECTOR('',#106167,1.); +#106167 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106168 = ORIENTED_EDGE('',*,*,#104427,.T.); +#106169 = ORIENTED_EDGE('',*,*,#104435,.T.); +#106170 = ORIENTED_EDGE('',*,*,#104443,.T.); +#106171 = PLANE('',#106172); +#106172 = AXIS2_PLACEMENT_3D('',#106173,#106174,#106175); +#106173 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#106174 = DIRECTION('',(0.,-0.,-1.)); +#106175 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106176 = ADVANCED_FACE('',(#106177),#106218,.T.); +#106177 = FACE_BOUND('',#106178,.T.); +#106178 = EDGE_LOOP('',(#106179,#106187,#106188,#106196,#106204,#106212) + ); +#106179 = ORIENTED_EDGE('',*,*,#106180,.T.); +#106180 = EDGE_CURVE('',#106181,#104412,#106183,.T.); +#106181 = VERTEX_POINT('',#106182); +#106182 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#106183 = LINE('',#106184,#106185); +#106184 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#106185 = VECTOR('',#106186,1.); +#106186 = DIRECTION('',(0.,0.,1.)); +#106187 = ORIENTED_EDGE('',*,*,#104419,.F.); +#106188 = ORIENTED_EDGE('',*,*,#106189,.T.); +#106189 = EDGE_CURVE('',#104420,#106190,#106192,.T.); +#106190 = VERTEX_POINT('',#106191); +#106191 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#106192 = LINE('',#106193,#106194); +#106193 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#106194 = VECTOR('',#106195,1.); +#106195 = DIRECTION('',(0.,0.,-1.)); +#106196 = ORIENTED_EDGE('',*,*,#106197,.T.); +#106197 = EDGE_CURVE('',#106190,#106198,#106200,.T.); +#106198 = VERTEX_POINT('',#106199); +#106199 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#106200 = LINE('',#106201,#106202); +#106201 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#106202 = VECTOR('',#106203,1.); +#106203 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106204 = ORIENTED_EDGE('',*,*,#106205,.F.); +#106205 = EDGE_CURVE('',#106206,#106198,#106208,.T.); +#106206 = VERTEX_POINT('',#106207); +#106207 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#106208 = LINE('',#106209,#106210); +#106209 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#106210 = VECTOR('',#106211,1.); +#106211 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106212 = ORIENTED_EDGE('',*,*,#106213,.T.); +#106213 = EDGE_CURVE('',#106206,#106181,#106214,.T.); +#106214 = LINE('',#106215,#106216); +#106215 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#106216 = VECTOR('',#106217,1.); +#106217 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106218 = PLANE('',#106219); +#106219 = AXIS2_PLACEMENT_3D('',#106220,#106221,#106222); +#106220 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#106221 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106222 = DIRECTION('',(0.,0.,1.)); +#106223 = ADVANCED_FACE('',(#106224),#106235,.T.); +#106224 = FACE_BOUND('',#106225,.T.); +#106225 = EDGE_LOOP('',(#106226,#106227,#106228,#106234)); +#106226 = ORIENTED_EDGE('',*,*,#104467,.F.); +#106227 = ORIENTED_EDGE('',*,*,#104477,.T.); +#106228 = ORIENTED_EDGE('',*,*,#106229,.T.); +#106229 = EDGE_CURVE('',#104478,#104518,#106230,.T.); +#106230 = LINE('',#106231,#106232); +#106231 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#106232 = VECTOR('',#106233,1.); +#106233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106234 = ORIENTED_EDGE('',*,*,#104525,.T.); +#106235 = PLANE('',#106236); +#106236 = AXIS2_PLACEMENT_3D('',#106237,#106238,#106239); +#106237 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#106238 = DIRECTION('',(0.,-0.,-1.)); +#106239 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106240 = ADVANCED_FACE('',(#106241),#106282,.F.); +#106241 = FACE_BOUND('',#106242,.F.); +#106242 = EDGE_LOOP('',(#106243,#106251,#106252,#106260,#106268,#106276) + ); +#106243 = ORIENTED_EDGE('',*,*,#106244,.T.); +#106244 = EDGE_CURVE('',#106245,#104518,#106247,.T.); +#106245 = VERTEX_POINT('',#106246); +#106246 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#106247 = LINE('',#106248,#106249); +#106248 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#106249 = VECTOR('',#106250,1.); +#106250 = DIRECTION('',(0.,0.,1.)); +#106251 = ORIENTED_EDGE('',*,*,#104517,.F.); +#106252 = ORIENTED_EDGE('',*,*,#106253,.T.); +#106253 = EDGE_CURVE('',#104510,#106254,#106256,.T.); +#106254 = VERTEX_POINT('',#106255); +#106255 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#106256 = LINE('',#106257,#106258); +#106257 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#106258 = VECTOR('',#106259,1.); +#106259 = DIRECTION('',(0.,0.,-1.)); +#106260 = ORIENTED_EDGE('',*,*,#106261,.T.); +#106261 = EDGE_CURVE('',#106254,#106262,#106264,.T.); +#106262 = VERTEX_POINT('',#106263); +#106263 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#106264 = LINE('',#106265,#106266); +#106265 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#106266 = VECTOR('',#106267,1.); +#106267 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106268 = ORIENTED_EDGE('',*,*,#106269,.T.); +#106269 = EDGE_CURVE('',#106262,#106270,#106272,.T.); +#106270 = VERTEX_POINT('',#106271); +#106271 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#106272 = LINE('',#106273,#106274); +#106273 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#106274 = VECTOR('',#106275,1.); +#106275 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106276 = ORIENTED_EDGE('',*,*,#106277,.T.); +#106277 = EDGE_CURVE('',#106270,#106245,#106278,.T.); +#106278 = LINE('',#106279,#106280); +#106279 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#106280 = VECTOR('',#106281,1.); +#106281 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106282 = PLANE('',#106283); +#106283 = AXIS2_PLACEMENT_3D('',#106284,#106285,#106286); +#106284 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#106285 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106286 = DIRECTION('',(0.,0.,1.)); +#106287 = ADVANCED_FACE('',(#106288),#106299,.T.); +#106288 = FACE_BOUND('',#106289,.T.); +#106289 = EDGE_LOOP('',(#106290,#106296,#106297,#106298)); +#106290 = ORIENTED_EDGE('',*,*,#106291,.F.); +#106291 = EDGE_CURVE('',#104486,#104510,#106292,.T.); +#106292 = LINE('',#106293,#106294); +#106293 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#106294 = VECTOR('',#106295,1.); +#106295 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106296 = ORIENTED_EDGE('',*,*,#104493,.T.); +#106297 = ORIENTED_EDGE('',*,*,#104501,.T.); +#106298 = ORIENTED_EDGE('',*,*,#104509,.T.); +#106299 = PLANE('',#106300); +#106300 = AXIS2_PLACEMENT_3D('',#106301,#106302,#106303); +#106301 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#106302 = DIRECTION('',(0.,-0.,-1.)); +#106303 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106304 = ADVANCED_FACE('',(#106305),#106346,.T.); +#106305 = FACE_BOUND('',#106306,.T.); +#106306 = EDGE_LOOP('',(#106307,#106315,#106316,#106324,#106332,#106340) + ); +#106307 = ORIENTED_EDGE('',*,*,#106308,.T.); +#106308 = EDGE_CURVE('',#106309,#104478,#106311,.T.); +#106309 = VERTEX_POINT('',#106310); +#106310 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#106311 = LINE('',#106312,#106313); +#106312 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#106313 = VECTOR('',#106314,1.); +#106314 = DIRECTION('',(0.,0.,1.)); +#106315 = ORIENTED_EDGE('',*,*,#104485,.F.); +#106316 = ORIENTED_EDGE('',*,*,#106317,.T.); +#106317 = EDGE_CURVE('',#104486,#106318,#106320,.T.); +#106318 = VERTEX_POINT('',#106319); +#106319 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#106320 = LINE('',#106321,#106322); +#106321 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#106322 = VECTOR('',#106323,1.); +#106323 = DIRECTION('',(0.,0.,-1.)); +#106324 = ORIENTED_EDGE('',*,*,#106325,.T.); +#106325 = EDGE_CURVE('',#106318,#106326,#106328,.T.); +#106326 = VERTEX_POINT('',#106327); +#106327 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#106328 = LINE('',#106329,#106330); +#106329 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#106330 = VECTOR('',#106331,1.); +#106331 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#106332 = ORIENTED_EDGE('',*,*,#106333,.F.); +#106333 = EDGE_CURVE('',#106334,#106326,#106336,.T.); +#106334 = VERTEX_POINT('',#106335); +#106335 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#106336 = LINE('',#106337,#106338); +#106337 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#106338 = VECTOR('',#106339,1.); +#106339 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106340 = ORIENTED_EDGE('',*,*,#106341,.T.); +#106341 = EDGE_CURVE('',#106334,#106309,#106342,.T.); +#106342 = LINE('',#106343,#106344); +#106343 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#106344 = VECTOR('',#106345,1.); +#106345 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#106346 = PLANE('',#106347); +#106347 = AXIS2_PLACEMENT_3D('',#106348,#106349,#106350); +#106348 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#106349 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106350 = DIRECTION('',(0.,0.,1.)); +#106351 = ADVANCED_FACE('',(#106352),#106377,.F.); +#106352 = FACE_BOUND('',#106353,.F.); +#106353 = EDGE_LOOP('',(#106354,#106362,#106370,#106376)); +#106354 = ORIENTED_EDGE('',*,*,#106355,.T.); +#106355 = EDGE_CURVE('',#104564,#106356,#106358,.T.); +#106356 = VERTEX_POINT('',#106357); +#106357 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#106358 = LINE('',#106359,#106360); +#106359 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#106360 = VECTOR('',#106361,1.); +#106361 = DIRECTION('',(0.,-0.,-1.)); +#106362 = ORIENTED_EDGE('',*,*,#106363,.T.); +#106363 = EDGE_CURVE('',#106356,#106364,#106366,.T.); +#106364 = VERTEX_POINT('',#106365); +#106365 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#106366 = LINE('',#106367,#106368); +#106367 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#106368 = VECTOR('',#106369,1.); +#106369 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106370 = ORIENTED_EDGE('',*,*,#106371,.F.); +#106371 = EDGE_CURVE('',#104573,#106364,#106372,.T.); +#106372 = LINE('',#106373,#106374); +#106373 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#106374 = VECTOR('',#106375,1.); +#106375 = DIRECTION('',(0.,-0.,-1.)); +#106376 = ORIENTED_EDGE('',*,*,#104580,.F.); +#106377 = PLANE('',#106378); +#106378 = AXIS2_PLACEMENT_3D('',#106379,#106380,#106381); +#106379 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#106380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106381 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106382 = ADVANCED_FACE('',(#106383),#106433,.F.); +#106383 = FACE_BOUND('',#106384,.F.); +#106384 = EDGE_LOOP('',(#106385,#106386,#106387,#106395,#106403,#106411, + #106419,#106427)); +#106385 = ORIENTED_EDGE('',*,*,#104604,.F.); +#106386 = ORIENTED_EDGE('',*,*,#106371,.T.); +#106387 = ORIENTED_EDGE('',*,*,#106388,.T.); +#106388 = EDGE_CURVE('',#106364,#106389,#106391,.T.); +#106389 = VERTEX_POINT('',#106390); +#106390 = CARTESIAN_POINT('',(0.1,-17.48,0.9)); +#106391 = LINE('',#106392,#106393); +#106392 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#106393 = VECTOR('',#106394,1.); +#106394 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106395 = ORIENTED_EDGE('',*,*,#106396,.T.); +#106396 = EDGE_CURVE('',#106389,#106397,#106399,.T.); +#106397 = VERTEX_POINT('',#106398); +#106398 = CARTESIAN_POINT('',(0.1,-17.48,7.4)); +#106399 = LINE('',#106400,#106401); +#106400 = CARTESIAN_POINT('',(0.1,-17.48,6.055738799212)); +#106401 = VECTOR('',#106402,1.); +#106402 = DIRECTION('',(0.,-0.,1.)); +#106403 = ORIENTED_EDGE('',*,*,#106404,.F.); +#106404 = EDGE_CURVE('',#106405,#106397,#106407,.T.); +#106405 = VERTEX_POINT('',#106406); +#106406 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#106407 = LINE('',#106408,#106409); +#106408 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#106409 = VECTOR('',#106410,1.); +#106410 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106411 = ORIENTED_EDGE('',*,*,#106412,.F.); +#106412 = EDGE_CURVE('',#106413,#106405,#106415,.T.); +#106413 = VERTEX_POINT('',#106414); +#106414 = CARTESIAN_POINT('',(-0.1,-17.48,0.9)); +#106415 = LINE('',#106416,#106417); +#106416 = CARTESIAN_POINT('',(-0.1,-17.48,6.055738799212)); +#106417 = VECTOR('',#106418,1.); +#106418 = DIRECTION('',(0.,-0.,1.)); +#106419 = ORIENTED_EDGE('',*,*,#106420,.T.); +#106420 = EDGE_CURVE('',#106413,#106421,#106423,.T.); +#106421 = VERTEX_POINT('',#106422); +#106422 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#106423 = LINE('',#106424,#106425); +#106424 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#106425 = VECTOR('',#106426,1.); +#106426 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106427 = ORIENTED_EDGE('',*,*,#106428,.F.); +#106428 = EDGE_CURVE('',#104597,#106421,#106429,.T.); +#106429 = LINE('',#106430,#106431); +#106430 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#106431 = VECTOR('',#106432,1.); +#106432 = DIRECTION('',(0.,-0.,-1.)); +#106433 = PLANE('',#106434); +#106434 = AXIS2_PLACEMENT_3D('',#106435,#106436,#106437); +#106435 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#106436 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106437 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106438 = ADVANCED_FACE('',(#106439),#106457,.F.); +#106439 = FACE_BOUND('',#106440,.F.); +#106440 = EDGE_LOOP('',(#106441,#106442,#106450,#106456)); +#106441 = ORIENTED_EDGE('',*,*,#106428,.T.); +#106442 = ORIENTED_EDGE('',*,*,#106443,.T.); +#106443 = EDGE_CURVE('',#106421,#106444,#106446,.T.); +#106444 = VERTEX_POINT('',#106445); +#106445 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#106446 = LINE('',#106447,#106448); +#106447 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#106448 = VECTOR('',#106449,1.); +#106449 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106450 = ORIENTED_EDGE('',*,*,#106451,.F.); +#106451 = EDGE_CURVE('',#104621,#106444,#106452,.T.); +#106452 = LINE('',#106453,#106454); +#106453 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#106454 = VECTOR('',#106455,1.); +#106455 = DIRECTION('',(0.,-0.,-1.)); +#106456 = ORIENTED_EDGE('',*,*,#104628,.F.); +#106457 = PLANE('',#106458); +#106458 = AXIS2_PLACEMENT_3D('',#106459,#106460,#106461); +#106459 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#106460 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106461 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106462 = ADVANCED_FACE('',(#106463),#106506,.F.); +#106463 = FACE_BOUND('',#106464,.F.); +#106464 = EDGE_LOOP('',(#106465,#106466,#106467,#106475,#106483,#106491, + #106499,#106505)); +#106465 = ORIENTED_EDGE('',*,*,#104645,.F.); +#106466 = ORIENTED_EDGE('',*,*,#106451,.T.); +#106467 = ORIENTED_EDGE('',*,*,#106468,.T.); +#106468 = EDGE_CURVE('',#106444,#106469,#106471,.T.); +#106469 = VERTEX_POINT('',#106470); +#106470 = CARTESIAN_POINT('',(-0.1,-18.08,0.9)); +#106471 = LINE('',#106472,#106473); +#106472 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#106473 = VECTOR('',#106474,1.); +#106474 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106475 = ORIENTED_EDGE('',*,*,#106476,.F.); +#106476 = EDGE_CURVE('',#106477,#106469,#106479,.T.); +#106477 = VERTEX_POINT('',#106478); +#106478 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#106479 = LINE('',#106480,#106481); +#106480 = CARTESIAN_POINT('',(-0.1,-18.08,6.055738799212)); +#106481 = VECTOR('',#106482,1.); +#106482 = DIRECTION('',(-0.,0.,-1.)); +#106483 = ORIENTED_EDGE('',*,*,#106484,.T.); +#106484 = EDGE_CURVE('',#106477,#106485,#106487,.T.); +#106485 = VERTEX_POINT('',#106486); +#106486 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#106487 = LINE('',#106488,#106489); +#106488 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#106489 = VECTOR('',#106490,1.); +#106490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106491 = ORIENTED_EDGE('',*,*,#106492,.T.); +#106492 = EDGE_CURVE('',#106485,#106493,#106495,.T.); +#106493 = VERTEX_POINT('',#106494); +#106494 = CARTESIAN_POINT('',(0.1,-18.08,0.9)); +#106495 = LINE('',#106496,#106497); +#106496 = CARTESIAN_POINT('',(0.1,-18.08,6.055738799212)); +#106497 = VECTOR('',#106498,1.); +#106498 = DIRECTION('',(-0.,0.,-1.)); +#106499 = ORIENTED_EDGE('',*,*,#106500,.T.); +#106500 = EDGE_CURVE('',#106493,#106356,#106501,.T.); +#106501 = LINE('',#106502,#106503); +#106502 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#106503 = VECTOR('',#106504,1.); +#106504 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106505 = ORIENTED_EDGE('',*,*,#106355,.F.); +#106506 = PLANE('',#106507); +#106507 = AXIS2_PLACEMENT_3D('',#106508,#106509,#106510); +#106508 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#106509 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106510 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106511 = ADVANCED_FACE('',(#106512),#106537,.F.); +#106512 = FACE_BOUND('',#106513,.F.); +#106513 = EDGE_LOOP('',(#106514,#106522,#106530,#106536)); +#106514 = ORIENTED_EDGE('',*,*,#106515,.T.); +#106515 = EDGE_CURVE('',#104660,#106516,#106518,.T.); +#106516 = VERTEX_POINT('',#106517); +#106517 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#106518 = LINE('',#106519,#106520); +#106519 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#106520 = VECTOR('',#106521,1.); +#106521 = DIRECTION('',(0.,-0.,-1.)); +#106522 = ORIENTED_EDGE('',*,*,#106523,.T.); +#106523 = EDGE_CURVE('',#106516,#106524,#106526,.T.); +#106524 = VERTEX_POINT('',#106525); +#106525 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#106526 = LINE('',#106527,#106528); +#106527 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#106528 = VECTOR('',#106529,1.); +#106529 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106530 = ORIENTED_EDGE('',*,*,#106531,.F.); +#106531 = EDGE_CURVE('',#104669,#106524,#106532,.T.); +#106532 = LINE('',#106533,#106534); +#106533 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#106534 = VECTOR('',#106535,1.); +#106535 = DIRECTION('',(0.,-0.,-1.)); +#106536 = ORIENTED_EDGE('',*,*,#104676,.F.); +#106537 = PLANE('',#106538); +#106538 = AXIS2_PLACEMENT_3D('',#106539,#106540,#106541); +#106539 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#106540 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106541 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106542 = ADVANCED_FACE('',(#106543),#106593,.F.); +#106543 = FACE_BOUND('',#106544,.F.); +#106544 = EDGE_LOOP('',(#106545,#106546,#106547,#106555,#106563,#106571, + #106579,#106587)); +#106545 = ORIENTED_EDGE('',*,*,#104700,.F.); +#106546 = ORIENTED_EDGE('',*,*,#106531,.T.); +#106547 = ORIENTED_EDGE('',*,*,#106548,.T.); +#106548 = EDGE_CURVE('',#106524,#106549,#106551,.T.); +#106549 = VERTEX_POINT('',#106550); +#106550 = CARTESIAN_POINT('',(0.1,-14.94,0.9)); +#106551 = LINE('',#106552,#106553); +#106552 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#106553 = VECTOR('',#106554,1.); +#106554 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106555 = ORIENTED_EDGE('',*,*,#106556,.T.); +#106556 = EDGE_CURVE('',#106549,#106557,#106559,.T.); +#106557 = VERTEX_POINT('',#106558); +#106558 = CARTESIAN_POINT('',(0.1,-14.94,7.4)); +#106559 = LINE('',#106560,#106561); +#106560 = CARTESIAN_POINT('',(0.1,-14.94,6.055738799212)); +#106561 = VECTOR('',#106562,1.); +#106562 = DIRECTION('',(0.,-0.,1.)); +#106563 = ORIENTED_EDGE('',*,*,#106564,.F.); +#106564 = EDGE_CURVE('',#106565,#106557,#106567,.T.); +#106565 = VERTEX_POINT('',#106566); +#106566 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#106567 = LINE('',#106568,#106569); +#106568 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#106569 = VECTOR('',#106570,1.); +#106570 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106571 = ORIENTED_EDGE('',*,*,#106572,.F.); +#106572 = EDGE_CURVE('',#106573,#106565,#106575,.T.); +#106573 = VERTEX_POINT('',#106574); +#106574 = CARTESIAN_POINT('',(-0.1,-14.94,0.9)); +#106575 = LINE('',#106576,#106577); +#106576 = CARTESIAN_POINT('',(-0.1,-14.94,6.055738799212)); +#106577 = VECTOR('',#106578,1.); +#106578 = DIRECTION('',(0.,-0.,1.)); +#106579 = ORIENTED_EDGE('',*,*,#106580,.T.); +#106580 = EDGE_CURVE('',#106573,#106581,#106583,.T.); +#106581 = VERTEX_POINT('',#106582); +#106582 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#106583 = LINE('',#106584,#106585); +#106584 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#106585 = VECTOR('',#106586,1.); +#106586 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106587 = ORIENTED_EDGE('',*,*,#106588,.F.); +#106588 = EDGE_CURVE('',#104693,#106581,#106589,.T.); +#106589 = LINE('',#106590,#106591); +#106590 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#106591 = VECTOR('',#106592,1.); +#106592 = DIRECTION('',(0.,-0.,-1.)); +#106593 = PLANE('',#106594); +#106594 = AXIS2_PLACEMENT_3D('',#106595,#106596,#106597); +#106595 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#106596 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106597 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106598 = ADVANCED_FACE('',(#106599),#106617,.F.); +#106599 = FACE_BOUND('',#106600,.F.); +#106600 = EDGE_LOOP('',(#106601,#106602,#106610,#106616)); +#106601 = ORIENTED_EDGE('',*,*,#106588,.T.); +#106602 = ORIENTED_EDGE('',*,*,#106603,.T.); +#106603 = EDGE_CURVE('',#106581,#106604,#106606,.T.); +#106604 = VERTEX_POINT('',#106605); +#106605 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#106606 = LINE('',#106607,#106608); +#106607 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#106608 = VECTOR('',#106609,1.); +#106609 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106610 = ORIENTED_EDGE('',*,*,#106611,.F.); +#106611 = EDGE_CURVE('',#104717,#106604,#106612,.T.); +#106612 = LINE('',#106613,#106614); +#106613 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#106614 = VECTOR('',#106615,1.); +#106615 = DIRECTION('',(0.,-0.,-1.)); +#106616 = ORIENTED_EDGE('',*,*,#104724,.F.); +#106617 = PLANE('',#106618); +#106618 = AXIS2_PLACEMENT_3D('',#106619,#106620,#106621); +#106619 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#106620 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106621 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106622 = ADVANCED_FACE('',(#106623),#106666,.F.); +#106623 = FACE_BOUND('',#106624,.F.); +#106624 = EDGE_LOOP('',(#106625,#106626,#106627,#106635,#106643,#106651, + #106659,#106665)); +#106625 = ORIENTED_EDGE('',*,*,#104741,.F.); +#106626 = ORIENTED_EDGE('',*,*,#106611,.T.); +#106627 = ORIENTED_EDGE('',*,*,#106628,.T.); +#106628 = EDGE_CURVE('',#106604,#106629,#106631,.T.); +#106629 = VERTEX_POINT('',#106630); +#106630 = CARTESIAN_POINT('',(-0.1,-15.54,0.9)); +#106631 = LINE('',#106632,#106633); +#106632 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#106633 = VECTOR('',#106634,1.); +#106634 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106635 = ORIENTED_EDGE('',*,*,#106636,.F.); +#106636 = EDGE_CURVE('',#106637,#106629,#106639,.T.); +#106637 = VERTEX_POINT('',#106638); +#106638 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#106639 = LINE('',#106640,#106641); +#106640 = CARTESIAN_POINT('',(-0.1,-15.54,6.055738799212)); +#106641 = VECTOR('',#106642,1.); +#106642 = DIRECTION('',(-0.,0.,-1.)); +#106643 = ORIENTED_EDGE('',*,*,#106644,.T.); +#106644 = EDGE_CURVE('',#106637,#106645,#106647,.T.); +#106645 = VERTEX_POINT('',#106646); +#106646 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#106647 = LINE('',#106648,#106649); +#106648 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#106649 = VECTOR('',#106650,1.); +#106650 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106651 = ORIENTED_EDGE('',*,*,#106652,.T.); +#106652 = EDGE_CURVE('',#106645,#106653,#106655,.T.); +#106653 = VERTEX_POINT('',#106654); +#106654 = CARTESIAN_POINT('',(0.1,-15.54,0.9)); +#106655 = LINE('',#106656,#106657); +#106656 = CARTESIAN_POINT('',(0.1,-15.54,6.055738799212)); +#106657 = VECTOR('',#106658,1.); +#106658 = DIRECTION('',(-0.,0.,-1.)); +#106659 = ORIENTED_EDGE('',*,*,#106660,.T.); +#106660 = EDGE_CURVE('',#106653,#106516,#106661,.T.); +#106661 = LINE('',#106662,#106663); +#106662 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#106663 = VECTOR('',#106664,1.); +#106664 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106665 = ORIENTED_EDGE('',*,*,#106515,.F.); +#106666 = PLANE('',#106667); +#106667 = AXIS2_PLACEMENT_3D('',#106668,#106669,#106670); +#106668 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#106669 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106670 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106671 = ADVANCED_FACE('',(#106672),#106697,.F.); +#106672 = FACE_BOUND('',#106673,.F.); +#106673 = EDGE_LOOP('',(#106674,#106682,#106690,#106696)); +#106674 = ORIENTED_EDGE('',*,*,#106675,.T.); +#106675 = EDGE_CURVE('',#104756,#106676,#106678,.T.); +#106676 = VERTEX_POINT('',#106677); +#106677 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#106678 = LINE('',#106679,#106680); +#106679 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#106680 = VECTOR('',#106681,1.); +#106681 = DIRECTION('',(0.,-0.,-1.)); +#106682 = ORIENTED_EDGE('',*,*,#106683,.T.); +#106683 = EDGE_CURVE('',#106676,#106684,#106686,.T.); +#106684 = VERTEX_POINT('',#106685); +#106685 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#106686 = LINE('',#106687,#106688); +#106687 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#106688 = VECTOR('',#106689,1.); +#106689 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106690 = ORIENTED_EDGE('',*,*,#106691,.F.); +#106691 = EDGE_CURVE('',#104765,#106684,#106692,.T.); +#106692 = LINE('',#106693,#106694); +#106693 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#106694 = VECTOR('',#106695,1.); +#106695 = DIRECTION('',(0.,-0.,-1.)); +#106696 = ORIENTED_EDGE('',*,*,#104772,.F.); +#106697 = PLANE('',#106698); +#106698 = AXIS2_PLACEMENT_3D('',#106699,#106700,#106701); +#106699 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#106700 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106701 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106702 = ADVANCED_FACE('',(#106703),#106753,.F.); +#106703 = FACE_BOUND('',#106704,.F.); +#106704 = EDGE_LOOP('',(#106705,#106706,#106707,#106715,#106723,#106731, + #106739,#106747)); +#106705 = ORIENTED_EDGE('',*,*,#104796,.F.); +#106706 = ORIENTED_EDGE('',*,*,#106691,.T.); +#106707 = ORIENTED_EDGE('',*,*,#106708,.T.); +#106708 = EDGE_CURVE('',#106684,#106709,#106711,.T.); +#106709 = VERTEX_POINT('',#106710); +#106710 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#106711 = LINE('',#106712,#106713); +#106712 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#106713 = VECTOR('',#106714,1.); +#106714 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106715 = ORIENTED_EDGE('',*,*,#106716,.T.); +#106716 = EDGE_CURVE('',#106709,#106717,#106719,.T.); +#106717 = VERTEX_POINT('',#106718); +#106718 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#106719 = LINE('',#106720,#106721); +#106720 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#106721 = VECTOR('',#106722,1.); +#106722 = DIRECTION('',(0.,-0.,1.)); +#106723 = ORIENTED_EDGE('',*,*,#106724,.F.); +#106724 = EDGE_CURVE('',#106725,#106717,#106727,.T.); +#106725 = VERTEX_POINT('',#106726); +#106726 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#106727 = LINE('',#106728,#106729); +#106728 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#106729 = VECTOR('',#106730,1.); +#106730 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106731 = ORIENTED_EDGE('',*,*,#106732,.F.); +#106732 = EDGE_CURVE('',#106733,#106725,#106735,.T.); +#106733 = VERTEX_POINT('',#106734); +#106734 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#106735 = LINE('',#106736,#106737); +#106736 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#106737 = VECTOR('',#106738,1.); +#106738 = DIRECTION('',(0.,-0.,1.)); +#106739 = ORIENTED_EDGE('',*,*,#106740,.T.); +#106740 = EDGE_CURVE('',#106733,#106741,#106743,.T.); +#106741 = VERTEX_POINT('',#106742); +#106742 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#106743 = LINE('',#106744,#106745); +#106744 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#106745 = VECTOR('',#106746,1.); +#106746 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106747 = ORIENTED_EDGE('',*,*,#106748,.F.); +#106748 = EDGE_CURVE('',#104789,#106741,#106749,.T.); +#106749 = LINE('',#106750,#106751); +#106750 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#106751 = VECTOR('',#106752,1.); +#106752 = DIRECTION('',(0.,-0.,-1.)); +#106753 = PLANE('',#106754); +#106754 = AXIS2_PLACEMENT_3D('',#106755,#106756,#106757); +#106755 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#106756 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106757 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106758 = ADVANCED_FACE('',(#106759),#106777,.F.); +#106759 = FACE_BOUND('',#106760,.F.); +#106760 = EDGE_LOOP('',(#106761,#106762,#106770,#106776)); +#106761 = ORIENTED_EDGE('',*,*,#106748,.T.); +#106762 = ORIENTED_EDGE('',*,*,#106763,.T.); +#106763 = EDGE_CURVE('',#106741,#106764,#106766,.T.); +#106764 = VERTEX_POINT('',#106765); +#106765 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#106766 = LINE('',#106767,#106768); +#106767 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#106768 = VECTOR('',#106769,1.); +#106769 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106770 = ORIENTED_EDGE('',*,*,#106771,.F.); +#106771 = EDGE_CURVE('',#104813,#106764,#106772,.T.); +#106772 = LINE('',#106773,#106774); +#106773 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#106774 = VECTOR('',#106775,1.); +#106775 = DIRECTION('',(0.,-0.,-1.)); +#106776 = ORIENTED_EDGE('',*,*,#104820,.F.); +#106777 = PLANE('',#106778); +#106778 = AXIS2_PLACEMENT_3D('',#106779,#106780,#106781); +#106779 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#106780 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106781 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106782 = ADVANCED_FACE('',(#106783),#106826,.F.); +#106783 = FACE_BOUND('',#106784,.F.); +#106784 = EDGE_LOOP('',(#106785,#106786,#106787,#106795,#106803,#106811, + #106819,#106825)); +#106785 = ORIENTED_EDGE('',*,*,#104837,.F.); +#106786 = ORIENTED_EDGE('',*,*,#106771,.T.); +#106787 = ORIENTED_EDGE('',*,*,#106788,.T.); +#106788 = EDGE_CURVE('',#106764,#106789,#106791,.T.); +#106789 = VERTEX_POINT('',#106790); +#106790 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#106791 = LINE('',#106792,#106793); +#106792 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#106793 = VECTOR('',#106794,1.); +#106794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106795 = ORIENTED_EDGE('',*,*,#106796,.F.); +#106796 = EDGE_CURVE('',#106797,#106789,#106799,.T.); +#106797 = VERTEX_POINT('',#106798); +#106798 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#106799 = LINE('',#106800,#106801); +#106800 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#106801 = VECTOR('',#106802,1.); +#106802 = DIRECTION('',(-0.,0.,-1.)); +#106803 = ORIENTED_EDGE('',*,*,#106804,.T.); +#106804 = EDGE_CURVE('',#106797,#106805,#106807,.T.); +#106805 = VERTEX_POINT('',#106806); +#106806 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#106807 = LINE('',#106808,#106809); +#106808 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#106809 = VECTOR('',#106810,1.); +#106810 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106811 = ORIENTED_EDGE('',*,*,#106812,.T.); +#106812 = EDGE_CURVE('',#106805,#106813,#106815,.T.); +#106813 = VERTEX_POINT('',#106814); +#106814 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#106815 = LINE('',#106816,#106817); +#106816 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#106817 = VECTOR('',#106818,1.); +#106818 = DIRECTION('',(-0.,0.,-1.)); +#106819 = ORIENTED_EDGE('',*,*,#106820,.T.); +#106820 = EDGE_CURVE('',#106813,#106676,#106821,.T.); +#106821 = LINE('',#106822,#106823); +#106822 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#106823 = VECTOR('',#106824,1.); +#106824 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106825 = ORIENTED_EDGE('',*,*,#106675,.F.); +#106826 = PLANE('',#106827); +#106827 = AXIS2_PLACEMENT_3D('',#106828,#106829,#106830); +#106828 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#106829 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106830 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106831 = ADVANCED_FACE('',(#106832),#106857,.F.); +#106832 = FACE_BOUND('',#106833,.F.); +#106833 = EDGE_LOOP('',(#106834,#106842,#106850,#106856)); +#106834 = ORIENTED_EDGE('',*,*,#106835,.T.); +#106835 = EDGE_CURVE('',#104852,#106836,#106838,.T.); +#106836 = VERTEX_POINT('',#106837); +#106837 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#106838 = LINE('',#106839,#106840); +#106839 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#106840 = VECTOR('',#106841,1.); +#106841 = DIRECTION('',(0.,-0.,-1.)); +#106842 = ORIENTED_EDGE('',*,*,#106843,.T.); +#106843 = EDGE_CURVE('',#106836,#106844,#106846,.T.); +#106844 = VERTEX_POINT('',#106845); +#106845 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#106846 = LINE('',#106847,#106848); +#106847 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#106848 = VECTOR('',#106849,1.); +#106849 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106850 = ORIENTED_EDGE('',*,*,#106851,.F.); +#106851 = EDGE_CURVE('',#104861,#106844,#106852,.T.); +#106852 = LINE('',#106853,#106854); +#106853 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#106854 = VECTOR('',#106855,1.); +#106855 = DIRECTION('',(0.,-0.,-1.)); +#106856 = ORIENTED_EDGE('',*,*,#104868,.F.); +#106857 = PLANE('',#106858); +#106858 = AXIS2_PLACEMENT_3D('',#106859,#106860,#106861); +#106859 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#106860 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106861 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106862 = ADVANCED_FACE('',(#106863),#106913,.F.); +#106863 = FACE_BOUND('',#106864,.F.); +#106864 = EDGE_LOOP('',(#106865,#106866,#106867,#106875,#106883,#106891, + #106899,#106907)); +#106865 = ORIENTED_EDGE('',*,*,#104892,.F.); +#106866 = ORIENTED_EDGE('',*,*,#106851,.T.); +#106867 = ORIENTED_EDGE('',*,*,#106868,.T.); +#106868 = EDGE_CURVE('',#106844,#106869,#106871,.T.); +#106869 = VERTEX_POINT('',#106870); +#106870 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#106871 = LINE('',#106872,#106873); +#106872 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#106873 = VECTOR('',#106874,1.); +#106874 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106875 = ORIENTED_EDGE('',*,*,#106876,.T.); +#106876 = EDGE_CURVE('',#106869,#106877,#106879,.T.); +#106877 = VERTEX_POINT('',#106878); +#106878 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#106879 = LINE('',#106880,#106881); +#106880 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#106881 = VECTOR('',#106882,1.); +#106882 = DIRECTION('',(0.,-0.,1.)); +#106883 = ORIENTED_EDGE('',*,*,#106884,.F.); +#106884 = EDGE_CURVE('',#106885,#106877,#106887,.T.); +#106885 = VERTEX_POINT('',#106886); +#106886 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#106887 = LINE('',#106888,#106889); +#106888 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#106889 = VECTOR('',#106890,1.); +#106890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106891 = ORIENTED_EDGE('',*,*,#106892,.F.); +#106892 = EDGE_CURVE('',#106893,#106885,#106895,.T.); +#106893 = VERTEX_POINT('',#106894); +#106894 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#106895 = LINE('',#106896,#106897); +#106896 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#106897 = VECTOR('',#106898,1.); +#106898 = DIRECTION('',(0.,-0.,1.)); +#106899 = ORIENTED_EDGE('',*,*,#106900,.T.); +#106900 = EDGE_CURVE('',#106893,#106901,#106903,.T.); +#106901 = VERTEX_POINT('',#106902); +#106902 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#106903 = LINE('',#106904,#106905); +#106904 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#106905 = VECTOR('',#106906,1.); +#106906 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106907 = ORIENTED_EDGE('',*,*,#106908,.F.); +#106908 = EDGE_CURVE('',#104885,#106901,#106909,.T.); +#106909 = LINE('',#106910,#106911); +#106910 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#106911 = VECTOR('',#106912,1.); +#106912 = DIRECTION('',(0.,-0.,-1.)); +#106913 = PLANE('',#106914); +#106914 = AXIS2_PLACEMENT_3D('',#106915,#106916,#106917); +#106915 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#106916 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#106917 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106918 = ADVANCED_FACE('',(#106919),#106937,.F.); +#106919 = FACE_BOUND('',#106920,.F.); +#106920 = EDGE_LOOP('',(#106921,#106922,#106930,#106936)); +#106921 = ORIENTED_EDGE('',*,*,#106908,.T.); +#106922 = ORIENTED_EDGE('',*,*,#106923,.T.); +#106923 = EDGE_CURVE('',#106901,#106924,#106926,.T.); +#106924 = VERTEX_POINT('',#106925); +#106925 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#106926 = LINE('',#106927,#106928); +#106927 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#106928 = VECTOR('',#106929,1.); +#106929 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106930 = ORIENTED_EDGE('',*,*,#106931,.F.); +#106931 = EDGE_CURVE('',#104909,#106924,#106932,.T.); +#106932 = LINE('',#106933,#106934); +#106933 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#106934 = VECTOR('',#106935,1.); +#106935 = DIRECTION('',(0.,-0.,-1.)); +#106936 = ORIENTED_EDGE('',*,*,#104916,.F.); +#106937 = PLANE('',#106938); +#106938 = AXIS2_PLACEMENT_3D('',#106939,#106940,#106941); +#106939 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#106940 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#106941 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106942 = ADVANCED_FACE('',(#106943),#106986,.F.); +#106943 = FACE_BOUND('',#106944,.F.); +#106944 = EDGE_LOOP('',(#106945,#106946,#106947,#106955,#106963,#106971, + #106979,#106985)); +#106945 = ORIENTED_EDGE('',*,*,#104933,.F.); +#106946 = ORIENTED_EDGE('',*,*,#106931,.T.); +#106947 = ORIENTED_EDGE('',*,*,#106948,.T.); +#106948 = EDGE_CURVE('',#106924,#106949,#106951,.T.); +#106949 = VERTEX_POINT('',#106950); +#106950 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#106951 = LINE('',#106952,#106953); +#106952 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#106953 = VECTOR('',#106954,1.); +#106954 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106955 = ORIENTED_EDGE('',*,*,#106956,.F.); +#106956 = EDGE_CURVE('',#106957,#106949,#106959,.T.); +#106957 = VERTEX_POINT('',#106958); +#106958 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#106959 = LINE('',#106960,#106961); +#106960 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#106961 = VECTOR('',#106962,1.); +#106962 = DIRECTION('',(-0.,0.,-1.)); +#106963 = ORIENTED_EDGE('',*,*,#106964,.T.); +#106964 = EDGE_CURVE('',#106957,#106965,#106967,.T.); +#106965 = VERTEX_POINT('',#106966); +#106966 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#106967 = LINE('',#106968,#106969); +#106968 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#106969 = VECTOR('',#106970,1.); +#106970 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106971 = ORIENTED_EDGE('',*,*,#106972,.T.); +#106972 = EDGE_CURVE('',#106965,#106973,#106975,.T.); +#106973 = VERTEX_POINT('',#106974); +#106974 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#106975 = LINE('',#106976,#106977); +#106976 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#106977 = VECTOR('',#106978,1.); +#106978 = DIRECTION('',(-0.,0.,-1.)); +#106979 = ORIENTED_EDGE('',*,*,#106980,.T.); +#106980 = EDGE_CURVE('',#106973,#106836,#106981,.T.); +#106981 = LINE('',#106982,#106983); +#106982 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#106983 = VECTOR('',#106984,1.); +#106984 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106985 = ORIENTED_EDGE('',*,*,#106835,.F.); +#106986 = PLANE('',#106987); +#106987 = AXIS2_PLACEMENT_3D('',#106988,#106989,#106990); +#106988 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#106989 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#106990 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#106991 = ADVANCED_FACE('',(#106992),#107017,.F.); +#106992 = FACE_BOUND('',#106993,.F.); +#106993 = EDGE_LOOP('',(#106994,#107002,#107010,#107016)); +#106994 = ORIENTED_EDGE('',*,*,#106995,.T.); +#106995 = EDGE_CURVE('',#104948,#106996,#106998,.T.); +#106996 = VERTEX_POINT('',#106997); +#106997 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#106998 = LINE('',#106999,#107000); +#106999 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#107000 = VECTOR('',#107001,1.); +#107001 = DIRECTION('',(0.,-0.,-1.)); +#107002 = ORIENTED_EDGE('',*,*,#107003,.T.); +#107003 = EDGE_CURVE('',#106996,#107004,#107006,.T.); +#107004 = VERTEX_POINT('',#107005); +#107005 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#107006 = LINE('',#107007,#107008); +#107007 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#107008 = VECTOR('',#107009,1.); +#107009 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107010 = ORIENTED_EDGE('',*,*,#107011,.F.); +#107011 = EDGE_CURVE('',#104957,#107004,#107012,.T.); +#107012 = LINE('',#107013,#107014); +#107013 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#107014 = VECTOR('',#107015,1.); +#107015 = DIRECTION('',(0.,-0.,-1.)); +#107016 = ORIENTED_EDGE('',*,*,#104964,.F.); +#107017 = PLANE('',#107018); +#107018 = AXIS2_PLACEMENT_3D('',#107019,#107020,#107021); +#107019 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#107020 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107021 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107022 = ADVANCED_FACE('',(#107023),#107073,.F.); +#107023 = FACE_BOUND('',#107024,.F.); +#107024 = EDGE_LOOP('',(#107025,#107026,#107027,#107035,#107043,#107051, + #107059,#107067)); +#107025 = ORIENTED_EDGE('',*,*,#104988,.F.); +#107026 = ORIENTED_EDGE('',*,*,#107011,.T.); +#107027 = ORIENTED_EDGE('',*,*,#107028,.T.); +#107028 = EDGE_CURVE('',#107004,#107029,#107031,.T.); +#107029 = VERTEX_POINT('',#107030); +#107030 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#107031 = LINE('',#107032,#107033); +#107032 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#107033 = VECTOR('',#107034,1.); +#107034 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107035 = ORIENTED_EDGE('',*,*,#107036,.T.); +#107036 = EDGE_CURVE('',#107029,#107037,#107039,.T.); +#107037 = VERTEX_POINT('',#107038); +#107038 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#107039 = LINE('',#107040,#107041); +#107040 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#107041 = VECTOR('',#107042,1.); +#107042 = DIRECTION('',(0.,-0.,1.)); +#107043 = ORIENTED_EDGE('',*,*,#107044,.F.); +#107044 = EDGE_CURVE('',#107045,#107037,#107047,.T.); +#107045 = VERTEX_POINT('',#107046); +#107046 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#107047 = LINE('',#107048,#107049); +#107048 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#107049 = VECTOR('',#107050,1.); +#107050 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107051 = ORIENTED_EDGE('',*,*,#107052,.F.); +#107052 = EDGE_CURVE('',#107053,#107045,#107055,.T.); +#107053 = VERTEX_POINT('',#107054); +#107054 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#107055 = LINE('',#107056,#107057); +#107056 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#107057 = VECTOR('',#107058,1.); +#107058 = DIRECTION('',(0.,-0.,1.)); +#107059 = ORIENTED_EDGE('',*,*,#107060,.T.); +#107060 = EDGE_CURVE('',#107053,#107061,#107063,.T.); +#107061 = VERTEX_POINT('',#107062); +#107062 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#107063 = LINE('',#107064,#107065); +#107064 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#107065 = VECTOR('',#107066,1.); +#107066 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107067 = ORIENTED_EDGE('',*,*,#107068,.F.); +#107068 = EDGE_CURVE('',#104981,#107061,#107069,.T.); +#107069 = LINE('',#107070,#107071); +#107070 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#107071 = VECTOR('',#107072,1.); +#107072 = DIRECTION('',(0.,-0.,-1.)); +#107073 = PLANE('',#107074); +#107074 = AXIS2_PLACEMENT_3D('',#107075,#107076,#107077); +#107075 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#107076 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107077 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107078 = ADVANCED_FACE('',(#107079),#107097,.F.); +#107079 = FACE_BOUND('',#107080,.F.); +#107080 = EDGE_LOOP('',(#107081,#107082,#107090,#107096)); +#107081 = ORIENTED_EDGE('',*,*,#107068,.T.); +#107082 = ORIENTED_EDGE('',*,*,#107083,.T.); +#107083 = EDGE_CURVE('',#107061,#107084,#107086,.T.); +#107084 = VERTEX_POINT('',#107085); +#107085 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#107086 = LINE('',#107087,#107088); +#107087 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#107088 = VECTOR('',#107089,1.); +#107089 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107090 = ORIENTED_EDGE('',*,*,#107091,.F.); +#107091 = EDGE_CURVE('',#105005,#107084,#107092,.T.); +#107092 = LINE('',#107093,#107094); +#107093 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#107094 = VECTOR('',#107095,1.); +#107095 = DIRECTION('',(0.,-0.,-1.)); +#107096 = ORIENTED_EDGE('',*,*,#105012,.F.); +#107097 = PLANE('',#107098); +#107098 = AXIS2_PLACEMENT_3D('',#107099,#107100,#107101); +#107099 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#107100 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107101 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107102 = ADVANCED_FACE('',(#107103),#107146,.F.); +#107103 = FACE_BOUND('',#107104,.F.); +#107104 = EDGE_LOOP('',(#107105,#107106,#107107,#107115,#107123,#107131, + #107139,#107145)); +#107105 = ORIENTED_EDGE('',*,*,#105029,.F.); +#107106 = ORIENTED_EDGE('',*,*,#107091,.T.); +#107107 = ORIENTED_EDGE('',*,*,#107108,.T.); +#107108 = EDGE_CURVE('',#107084,#107109,#107111,.T.); +#107109 = VERTEX_POINT('',#107110); +#107110 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#107111 = LINE('',#107112,#107113); +#107112 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#107113 = VECTOR('',#107114,1.); +#107114 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107115 = ORIENTED_EDGE('',*,*,#107116,.F.); +#107116 = EDGE_CURVE('',#107117,#107109,#107119,.T.); +#107117 = VERTEX_POINT('',#107118); +#107118 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#107119 = LINE('',#107120,#107121); +#107120 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#107121 = VECTOR('',#107122,1.); +#107122 = DIRECTION('',(-0.,0.,-1.)); +#107123 = ORIENTED_EDGE('',*,*,#107124,.T.); +#107124 = EDGE_CURVE('',#107117,#107125,#107127,.T.); +#107125 = VERTEX_POINT('',#107126); +#107126 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#107127 = LINE('',#107128,#107129); +#107128 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#107129 = VECTOR('',#107130,1.); +#107130 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107131 = ORIENTED_EDGE('',*,*,#107132,.T.); +#107132 = EDGE_CURVE('',#107125,#107133,#107135,.T.); +#107133 = VERTEX_POINT('',#107134); +#107134 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#107135 = LINE('',#107136,#107137); +#107136 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#107137 = VECTOR('',#107138,1.); +#107138 = DIRECTION('',(-0.,0.,-1.)); +#107139 = ORIENTED_EDGE('',*,*,#107140,.T.); +#107140 = EDGE_CURVE('',#107133,#106996,#107141,.T.); +#107141 = LINE('',#107142,#107143); +#107142 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#107143 = VECTOR('',#107144,1.); +#107144 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107145 = ORIENTED_EDGE('',*,*,#106995,.F.); +#107146 = PLANE('',#107147); +#107147 = AXIS2_PLACEMENT_3D('',#107148,#107149,#107150); +#107148 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#107149 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107150 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107151 = ADVANCED_FACE('',(#107152),#107177,.F.); +#107152 = FACE_BOUND('',#107153,.F.); +#107153 = EDGE_LOOP('',(#107154,#107162,#107170,#107176)); +#107154 = ORIENTED_EDGE('',*,*,#107155,.T.); +#107155 = EDGE_CURVE('',#105044,#107156,#107158,.T.); +#107156 = VERTEX_POINT('',#107157); +#107157 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#107158 = LINE('',#107159,#107160); +#107159 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#107160 = VECTOR('',#107161,1.); +#107161 = DIRECTION('',(0.,-0.,-1.)); +#107162 = ORIENTED_EDGE('',*,*,#107163,.T.); +#107163 = EDGE_CURVE('',#107156,#107164,#107166,.T.); +#107164 = VERTEX_POINT('',#107165); +#107165 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#107166 = LINE('',#107167,#107168); +#107167 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#107168 = VECTOR('',#107169,1.); +#107169 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107170 = ORIENTED_EDGE('',*,*,#107171,.F.); +#107171 = EDGE_CURVE('',#105053,#107164,#107172,.T.); +#107172 = LINE('',#107173,#107174); +#107173 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#107174 = VECTOR('',#107175,1.); +#107175 = DIRECTION('',(0.,-0.,-1.)); +#107176 = ORIENTED_EDGE('',*,*,#105060,.F.); +#107177 = PLANE('',#107178); +#107178 = AXIS2_PLACEMENT_3D('',#107179,#107180,#107181); +#107179 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#107180 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107181 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107182 = ADVANCED_FACE('',(#107183),#107233,.F.); +#107183 = FACE_BOUND('',#107184,.F.); +#107184 = EDGE_LOOP('',(#107185,#107186,#107187,#107195,#107203,#107211, + #107219,#107227)); +#107185 = ORIENTED_EDGE('',*,*,#105084,.F.); +#107186 = ORIENTED_EDGE('',*,*,#107171,.T.); +#107187 = ORIENTED_EDGE('',*,*,#107188,.T.); +#107188 = EDGE_CURVE('',#107164,#107189,#107191,.T.); +#107189 = VERTEX_POINT('',#107190); +#107190 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#107191 = LINE('',#107192,#107193); +#107192 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#107193 = VECTOR('',#107194,1.); +#107194 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107195 = ORIENTED_EDGE('',*,*,#107196,.T.); +#107196 = EDGE_CURVE('',#107189,#107197,#107199,.T.); +#107197 = VERTEX_POINT('',#107198); +#107198 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#107199 = LINE('',#107200,#107201); +#107200 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#107201 = VECTOR('',#107202,1.); +#107202 = DIRECTION('',(0.,-0.,1.)); +#107203 = ORIENTED_EDGE('',*,*,#107204,.F.); +#107204 = EDGE_CURVE('',#107205,#107197,#107207,.T.); +#107205 = VERTEX_POINT('',#107206); +#107206 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#107207 = LINE('',#107208,#107209); +#107208 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#107209 = VECTOR('',#107210,1.); +#107210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107211 = ORIENTED_EDGE('',*,*,#107212,.F.); +#107212 = EDGE_CURVE('',#107213,#107205,#107215,.T.); +#107213 = VERTEX_POINT('',#107214); +#107214 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#107215 = LINE('',#107216,#107217); +#107216 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#107217 = VECTOR('',#107218,1.); +#107218 = DIRECTION('',(0.,-0.,1.)); +#107219 = ORIENTED_EDGE('',*,*,#107220,.T.); +#107220 = EDGE_CURVE('',#107213,#107221,#107223,.T.); +#107221 = VERTEX_POINT('',#107222); +#107222 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#107223 = LINE('',#107224,#107225); +#107224 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#107225 = VECTOR('',#107226,1.); +#107226 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107227 = ORIENTED_EDGE('',*,*,#107228,.F.); +#107228 = EDGE_CURVE('',#105077,#107221,#107229,.T.); +#107229 = LINE('',#107230,#107231); +#107230 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#107231 = VECTOR('',#107232,1.); +#107232 = DIRECTION('',(0.,-0.,-1.)); +#107233 = PLANE('',#107234); +#107234 = AXIS2_PLACEMENT_3D('',#107235,#107236,#107237); +#107235 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#107236 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107237 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107238 = ADVANCED_FACE('',(#107239),#107257,.F.); +#107239 = FACE_BOUND('',#107240,.F.); +#107240 = EDGE_LOOP('',(#107241,#107242,#107250,#107256)); +#107241 = ORIENTED_EDGE('',*,*,#107228,.T.); +#107242 = ORIENTED_EDGE('',*,*,#107243,.T.); +#107243 = EDGE_CURVE('',#107221,#107244,#107246,.T.); +#107244 = VERTEX_POINT('',#107245); +#107245 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#107246 = LINE('',#107247,#107248); +#107247 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#107248 = VECTOR('',#107249,1.); +#107249 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107250 = ORIENTED_EDGE('',*,*,#107251,.F.); +#107251 = EDGE_CURVE('',#105101,#107244,#107252,.T.); +#107252 = LINE('',#107253,#107254); +#107253 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#107254 = VECTOR('',#107255,1.); +#107255 = DIRECTION('',(0.,-0.,-1.)); +#107256 = ORIENTED_EDGE('',*,*,#105108,.F.); +#107257 = PLANE('',#107258); +#107258 = AXIS2_PLACEMENT_3D('',#107259,#107260,#107261); +#107259 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#107260 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107261 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107262 = ADVANCED_FACE('',(#107263),#107306,.F.); +#107263 = FACE_BOUND('',#107264,.F.); +#107264 = EDGE_LOOP('',(#107265,#107266,#107267,#107275,#107283,#107291, + #107299,#107305)); +#107265 = ORIENTED_EDGE('',*,*,#105125,.F.); +#107266 = ORIENTED_EDGE('',*,*,#107251,.T.); +#107267 = ORIENTED_EDGE('',*,*,#107268,.T.); +#107268 = EDGE_CURVE('',#107244,#107269,#107271,.T.); +#107269 = VERTEX_POINT('',#107270); +#107270 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#107271 = LINE('',#107272,#107273); +#107272 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#107273 = VECTOR('',#107274,1.); +#107274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107275 = ORIENTED_EDGE('',*,*,#107276,.F.); +#107276 = EDGE_CURVE('',#107277,#107269,#107279,.T.); +#107277 = VERTEX_POINT('',#107278); +#107278 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#107279 = LINE('',#107280,#107281); +#107280 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#107281 = VECTOR('',#107282,1.); +#107282 = DIRECTION('',(-0.,0.,-1.)); +#107283 = ORIENTED_EDGE('',*,*,#107284,.T.); +#107284 = EDGE_CURVE('',#107277,#107285,#107287,.T.); +#107285 = VERTEX_POINT('',#107286); +#107286 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#107287 = LINE('',#107288,#107289); +#107288 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#107289 = VECTOR('',#107290,1.); +#107290 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107291 = ORIENTED_EDGE('',*,*,#107292,.T.); +#107292 = EDGE_CURVE('',#107285,#107293,#107295,.T.); +#107293 = VERTEX_POINT('',#107294); +#107294 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#107295 = LINE('',#107296,#107297); +#107296 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#107297 = VECTOR('',#107298,1.); +#107298 = DIRECTION('',(-0.,0.,-1.)); +#107299 = ORIENTED_EDGE('',*,*,#107300,.T.); +#107300 = EDGE_CURVE('',#107293,#107156,#107301,.T.); +#107301 = LINE('',#107302,#107303); +#107302 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#107303 = VECTOR('',#107304,1.); +#107304 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107305 = ORIENTED_EDGE('',*,*,#107155,.F.); +#107306 = PLANE('',#107307); +#107307 = AXIS2_PLACEMENT_3D('',#107308,#107309,#107310); +#107308 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#107309 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107310 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107311 = ADVANCED_FACE('',(#107312),#107337,.F.); +#107312 = FACE_BOUND('',#107313,.F.); +#107313 = EDGE_LOOP('',(#107314,#107322,#107330,#107336)); +#107314 = ORIENTED_EDGE('',*,*,#107315,.T.); +#107315 = EDGE_CURVE('',#105140,#107316,#107318,.T.); +#107316 = VERTEX_POINT('',#107317); +#107317 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#107318 = LINE('',#107319,#107320); +#107319 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#107320 = VECTOR('',#107321,1.); +#107321 = DIRECTION('',(0.,-0.,-1.)); +#107322 = ORIENTED_EDGE('',*,*,#107323,.T.); +#107323 = EDGE_CURVE('',#107316,#107324,#107326,.T.); +#107324 = VERTEX_POINT('',#107325); +#107325 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#107326 = LINE('',#107327,#107328); +#107327 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#107328 = VECTOR('',#107329,1.); +#107329 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107330 = ORIENTED_EDGE('',*,*,#107331,.F.); +#107331 = EDGE_CURVE('',#105149,#107324,#107332,.T.); +#107332 = LINE('',#107333,#107334); +#107333 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#107334 = VECTOR('',#107335,1.); +#107335 = DIRECTION('',(0.,-0.,-1.)); +#107336 = ORIENTED_EDGE('',*,*,#105156,.F.); +#107337 = PLANE('',#107338); +#107338 = AXIS2_PLACEMENT_3D('',#107339,#107340,#107341); +#107339 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#107340 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107341 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107342 = ADVANCED_FACE('',(#107343),#107393,.F.); +#107343 = FACE_BOUND('',#107344,.F.); +#107344 = EDGE_LOOP('',(#107345,#107346,#107347,#107355,#107363,#107371, + #107379,#107387)); +#107345 = ORIENTED_EDGE('',*,*,#105180,.F.); +#107346 = ORIENTED_EDGE('',*,*,#107331,.T.); +#107347 = ORIENTED_EDGE('',*,*,#107348,.T.); +#107348 = EDGE_CURVE('',#107324,#107349,#107351,.T.); +#107349 = VERTEX_POINT('',#107350); +#107350 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#107351 = LINE('',#107352,#107353); +#107352 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#107353 = VECTOR('',#107354,1.); +#107354 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107355 = ORIENTED_EDGE('',*,*,#107356,.T.); +#107356 = EDGE_CURVE('',#107349,#107357,#107359,.T.); +#107357 = VERTEX_POINT('',#107358); +#107358 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#107359 = LINE('',#107360,#107361); +#107360 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#107361 = VECTOR('',#107362,1.); +#107362 = DIRECTION('',(0.,-0.,1.)); +#107363 = ORIENTED_EDGE('',*,*,#107364,.F.); +#107364 = EDGE_CURVE('',#107365,#107357,#107367,.T.); +#107365 = VERTEX_POINT('',#107366); +#107366 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#107367 = LINE('',#107368,#107369); +#107368 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#107369 = VECTOR('',#107370,1.); +#107370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107371 = ORIENTED_EDGE('',*,*,#107372,.F.); +#107372 = EDGE_CURVE('',#107373,#107365,#107375,.T.); +#107373 = VERTEX_POINT('',#107374); +#107374 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#107375 = LINE('',#107376,#107377); +#107376 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#107377 = VECTOR('',#107378,1.); +#107378 = DIRECTION('',(0.,-0.,1.)); +#107379 = ORIENTED_EDGE('',*,*,#107380,.T.); +#107380 = EDGE_CURVE('',#107373,#107381,#107383,.T.); +#107381 = VERTEX_POINT('',#107382); +#107382 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#107383 = LINE('',#107384,#107385); +#107384 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#107385 = VECTOR('',#107386,1.); +#107386 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107387 = ORIENTED_EDGE('',*,*,#107388,.F.); +#107388 = EDGE_CURVE('',#105173,#107381,#107389,.T.); +#107389 = LINE('',#107390,#107391); +#107390 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#107391 = VECTOR('',#107392,1.); +#107392 = DIRECTION('',(0.,-0.,-1.)); +#107393 = PLANE('',#107394); +#107394 = AXIS2_PLACEMENT_3D('',#107395,#107396,#107397); +#107395 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#107396 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107397 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107398 = ADVANCED_FACE('',(#107399),#107417,.F.); +#107399 = FACE_BOUND('',#107400,.F.); +#107400 = EDGE_LOOP('',(#107401,#107402,#107410,#107416)); +#107401 = ORIENTED_EDGE('',*,*,#107388,.T.); +#107402 = ORIENTED_EDGE('',*,*,#107403,.T.); +#107403 = EDGE_CURVE('',#107381,#107404,#107406,.T.); +#107404 = VERTEX_POINT('',#107405); +#107405 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#107406 = LINE('',#107407,#107408); +#107407 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#107408 = VECTOR('',#107409,1.); +#107409 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107410 = ORIENTED_EDGE('',*,*,#107411,.F.); +#107411 = EDGE_CURVE('',#105197,#107404,#107412,.T.); +#107412 = LINE('',#107413,#107414); +#107413 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#107414 = VECTOR('',#107415,1.); +#107415 = DIRECTION('',(0.,-0.,-1.)); +#107416 = ORIENTED_EDGE('',*,*,#105204,.F.); +#107417 = PLANE('',#107418); +#107418 = AXIS2_PLACEMENT_3D('',#107419,#107420,#107421); +#107419 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#107420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107421 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107422 = ADVANCED_FACE('',(#107423),#107466,.F.); +#107423 = FACE_BOUND('',#107424,.F.); +#107424 = EDGE_LOOP('',(#107425,#107426,#107427,#107435,#107443,#107451, + #107459,#107465)); +#107425 = ORIENTED_EDGE('',*,*,#105221,.F.); +#107426 = ORIENTED_EDGE('',*,*,#107411,.T.); +#107427 = ORIENTED_EDGE('',*,*,#107428,.T.); +#107428 = EDGE_CURVE('',#107404,#107429,#107431,.T.); +#107429 = VERTEX_POINT('',#107430); +#107430 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#107431 = LINE('',#107432,#107433); +#107432 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#107433 = VECTOR('',#107434,1.); +#107434 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107435 = ORIENTED_EDGE('',*,*,#107436,.F.); +#107436 = EDGE_CURVE('',#107437,#107429,#107439,.T.); +#107437 = VERTEX_POINT('',#107438); +#107438 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#107439 = LINE('',#107440,#107441); +#107440 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#107441 = VECTOR('',#107442,1.); +#107442 = DIRECTION('',(-0.,0.,-1.)); +#107443 = ORIENTED_EDGE('',*,*,#107444,.T.); +#107444 = EDGE_CURVE('',#107437,#107445,#107447,.T.); +#107445 = VERTEX_POINT('',#107446); +#107446 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#107447 = LINE('',#107448,#107449); +#107448 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#107449 = VECTOR('',#107450,1.); +#107450 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107451 = ORIENTED_EDGE('',*,*,#107452,.T.); +#107452 = EDGE_CURVE('',#107445,#107453,#107455,.T.); +#107453 = VERTEX_POINT('',#107454); +#107454 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#107455 = LINE('',#107456,#107457); +#107456 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#107457 = VECTOR('',#107458,1.); +#107458 = DIRECTION('',(-0.,0.,-1.)); +#107459 = ORIENTED_EDGE('',*,*,#107460,.T.); +#107460 = EDGE_CURVE('',#107453,#107316,#107461,.T.); +#107461 = LINE('',#107462,#107463); +#107462 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#107463 = VECTOR('',#107464,1.); +#107464 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107465 = ORIENTED_EDGE('',*,*,#107315,.F.); +#107466 = PLANE('',#107467); +#107467 = AXIS2_PLACEMENT_3D('',#107468,#107469,#107470); +#107468 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#107469 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107470 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107471 = ADVANCED_FACE('',(#107472),#107497,.F.); +#107472 = FACE_BOUND('',#107473,.F.); +#107473 = EDGE_LOOP('',(#107474,#107482,#107490,#107496)); +#107474 = ORIENTED_EDGE('',*,*,#107475,.T.); +#107475 = EDGE_CURVE('',#105236,#107476,#107478,.T.); +#107476 = VERTEX_POINT('',#107477); +#107477 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#107478 = LINE('',#107479,#107480); +#107479 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#107480 = VECTOR('',#107481,1.); +#107481 = DIRECTION('',(0.,-0.,-1.)); +#107482 = ORIENTED_EDGE('',*,*,#107483,.T.); +#107483 = EDGE_CURVE('',#107476,#107484,#107486,.T.); +#107484 = VERTEX_POINT('',#107485); +#107485 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#107486 = LINE('',#107487,#107488); +#107487 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#107488 = VECTOR('',#107489,1.); +#107489 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107490 = ORIENTED_EDGE('',*,*,#107491,.F.); +#107491 = EDGE_CURVE('',#105245,#107484,#107492,.T.); +#107492 = LINE('',#107493,#107494); +#107493 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#107494 = VECTOR('',#107495,1.); +#107495 = DIRECTION('',(0.,-0.,-1.)); +#107496 = ORIENTED_EDGE('',*,*,#105252,.F.); +#107497 = PLANE('',#107498); +#107498 = AXIS2_PLACEMENT_3D('',#107499,#107500,#107501); +#107499 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#107500 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107501 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107502 = ADVANCED_FACE('',(#107503),#107553,.F.); +#107503 = FACE_BOUND('',#107504,.F.); +#107504 = EDGE_LOOP('',(#107505,#107506,#107507,#107515,#107523,#107531, + #107539,#107547)); +#107505 = ORIENTED_EDGE('',*,*,#105276,.F.); +#107506 = ORIENTED_EDGE('',*,*,#107491,.T.); +#107507 = ORIENTED_EDGE('',*,*,#107508,.T.); +#107508 = EDGE_CURVE('',#107484,#107509,#107511,.T.); +#107509 = VERTEX_POINT('',#107510); +#107510 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#107511 = LINE('',#107512,#107513); +#107512 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#107513 = VECTOR('',#107514,1.); +#107514 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107515 = ORIENTED_EDGE('',*,*,#107516,.T.); +#107516 = EDGE_CURVE('',#107509,#107517,#107519,.T.); +#107517 = VERTEX_POINT('',#107518); +#107518 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#107519 = LINE('',#107520,#107521); +#107520 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#107521 = VECTOR('',#107522,1.); +#107522 = DIRECTION('',(0.,-0.,1.)); +#107523 = ORIENTED_EDGE('',*,*,#107524,.F.); +#107524 = EDGE_CURVE('',#107525,#107517,#107527,.T.); +#107525 = VERTEX_POINT('',#107526); +#107526 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#107527 = LINE('',#107528,#107529); +#107528 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#107529 = VECTOR('',#107530,1.); +#107530 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107531 = ORIENTED_EDGE('',*,*,#107532,.F.); +#107532 = EDGE_CURVE('',#107533,#107525,#107535,.T.); +#107533 = VERTEX_POINT('',#107534); +#107534 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#107535 = LINE('',#107536,#107537); +#107536 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#107537 = VECTOR('',#107538,1.); +#107538 = DIRECTION('',(0.,-0.,1.)); +#107539 = ORIENTED_EDGE('',*,*,#107540,.T.); +#107540 = EDGE_CURVE('',#107533,#107541,#107543,.T.); +#107541 = VERTEX_POINT('',#107542); +#107542 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#107543 = LINE('',#107544,#107545); +#107544 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#107545 = VECTOR('',#107546,1.); +#107546 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107547 = ORIENTED_EDGE('',*,*,#107548,.F.); +#107548 = EDGE_CURVE('',#105269,#107541,#107549,.T.); +#107549 = LINE('',#107550,#107551); +#107550 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#107551 = VECTOR('',#107552,1.); +#107552 = DIRECTION('',(0.,-0.,-1.)); +#107553 = PLANE('',#107554); +#107554 = AXIS2_PLACEMENT_3D('',#107555,#107556,#107557); +#107555 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#107556 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107557 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107558 = ADVANCED_FACE('',(#107559),#107577,.F.); +#107559 = FACE_BOUND('',#107560,.F.); +#107560 = EDGE_LOOP('',(#107561,#107562,#107570,#107576)); +#107561 = ORIENTED_EDGE('',*,*,#107548,.T.); +#107562 = ORIENTED_EDGE('',*,*,#107563,.T.); +#107563 = EDGE_CURVE('',#107541,#107564,#107566,.T.); +#107564 = VERTEX_POINT('',#107565); +#107565 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#107566 = LINE('',#107567,#107568); +#107567 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#107568 = VECTOR('',#107569,1.); +#107569 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107570 = ORIENTED_EDGE('',*,*,#107571,.F.); +#107571 = EDGE_CURVE('',#105293,#107564,#107572,.T.); +#107572 = LINE('',#107573,#107574); +#107573 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#107574 = VECTOR('',#107575,1.); +#107575 = DIRECTION('',(0.,-0.,-1.)); +#107576 = ORIENTED_EDGE('',*,*,#105300,.F.); +#107577 = PLANE('',#107578); +#107578 = AXIS2_PLACEMENT_3D('',#107579,#107580,#107581); +#107579 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#107580 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#107581 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107582 = ADVANCED_FACE('',(#107583),#107626,.F.); +#107583 = FACE_BOUND('',#107584,.F.); +#107584 = EDGE_LOOP('',(#107585,#107586,#107587,#107595,#107603,#107611, + #107619,#107625)); +#107585 = ORIENTED_EDGE('',*,*,#105317,.F.); +#107586 = ORIENTED_EDGE('',*,*,#107571,.T.); +#107587 = ORIENTED_EDGE('',*,*,#107588,.T.); +#107588 = EDGE_CURVE('',#107564,#107589,#107591,.T.); +#107589 = VERTEX_POINT('',#107590); +#107590 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#107591 = LINE('',#107592,#107593); +#107592 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#107593 = VECTOR('',#107594,1.); +#107594 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107595 = ORIENTED_EDGE('',*,*,#107596,.F.); +#107596 = EDGE_CURVE('',#107597,#107589,#107599,.T.); +#107597 = VERTEX_POINT('',#107598); +#107598 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#107599 = LINE('',#107600,#107601); +#107600 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#107601 = VECTOR('',#107602,1.); +#107602 = DIRECTION('',(-0.,0.,-1.)); +#107603 = ORIENTED_EDGE('',*,*,#107604,.T.); +#107604 = EDGE_CURVE('',#107597,#107605,#107607,.T.); +#107605 = VERTEX_POINT('',#107606); +#107606 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#107607 = LINE('',#107608,#107609); +#107608 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#107609 = VECTOR('',#107610,1.); +#107610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107611 = ORIENTED_EDGE('',*,*,#107612,.T.); +#107612 = EDGE_CURVE('',#107605,#107613,#107615,.T.); +#107613 = VERTEX_POINT('',#107614); +#107614 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#107615 = LINE('',#107616,#107617); +#107616 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#107617 = VECTOR('',#107618,1.); +#107618 = DIRECTION('',(-0.,0.,-1.)); +#107619 = ORIENTED_EDGE('',*,*,#107620,.T.); +#107620 = EDGE_CURVE('',#107613,#107476,#107621,.T.); +#107621 = LINE('',#107622,#107623); +#107622 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#107623 = VECTOR('',#107624,1.); +#107624 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107625 = ORIENTED_EDGE('',*,*,#107475,.F.); +#107626 = PLANE('',#107627); +#107627 = AXIS2_PLACEMENT_3D('',#107628,#107629,#107630); +#107628 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#107629 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107631 = ADVANCED_FACE('',(#107632),#107643,.T.); +#107632 = FACE_BOUND('',#107633,.T.); +#107633 = EDGE_LOOP('',(#107634,#107640,#107641,#107642)); +#107634 = ORIENTED_EDGE('',*,*,#107635,.T.); +#107635 = EDGE_CURVE('',#105413,#105349,#107636,.T.); +#107636 = LINE('',#107637,#107638); +#107637 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#107638 = VECTOR('',#107639,1.); +#107639 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107640 = ORIENTED_EDGE('',*,*,#105348,.T.); +#107641 = ORIENTED_EDGE('',*,*,#105333,.F.); +#107642 = ORIENTED_EDGE('',*,*,#105412,.F.); +#107643 = PLANE('',#107644); +#107644 = AXIS2_PLACEMENT_3D('',#107645,#107646,#107647); +#107645 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#107646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107647 = DIRECTION('',(0.,0.,1.)); +#107648 = ADVANCED_FACE('',(#107649),#107660,.T.); +#107649 = FACE_BOUND('',#107650,.T.); +#107650 = EDGE_LOOP('',(#107651,#107657,#107658,#107659)); +#107651 = ORIENTED_EDGE('',*,*,#107652,.T.); +#107652 = EDGE_CURVE('',#105438,#105374,#107653,.T.); +#107653 = LINE('',#107654,#107655); +#107654 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#107655 = VECTOR('',#107656,1.); +#107656 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107657 = ORIENTED_EDGE('',*,*,#105381,.T.); +#107658 = ORIENTED_EDGE('',*,*,#107635,.F.); +#107659 = ORIENTED_EDGE('',*,*,#105445,.F.); +#107660 = PLANE('',#107661); +#107661 = AXIS2_PLACEMENT_3D('',#107662,#107663,#107664); +#107662 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#107663 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107664 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107665 = ADVANCED_FACE('',(#107666),#107677,.T.); +#107666 = FACE_BOUND('',#107667,.T.); +#107667 = EDGE_LOOP('',(#107668,#107674,#107675,#107676)); +#107668 = ORIENTED_EDGE('',*,*,#107669,.T.); +#107669 = EDGE_CURVE('',#105430,#105366,#107670,.T.); +#107670 = LINE('',#107671,#107672); +#107671 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#107672 = VECTOR('',#107673,1.); +#107673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107674 = ORIENTED_EDGE('',*,*,#105373,.T.); +#107675 = ORIENTED_EDGE('',*,*,#107652,.F.); +#107676 = ORIENTED_EDGE('',*,*,#105437,.T.); +#107677 = PLANE('',#107678); +#107678 = AXIS2_PLACEMENT_3D('',#107679,#107680,#107681); +#107679 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#107680 = DIRECTION('',(0.,-0.,-1.)); +#107681 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107682 = ADVANCED_FACE('',(#107683),#107694,.T.); +#107683 = FACE_BOUND('',#107684,.T.); +#107684 = EDGE_LOOP('',(#107685,#107691,#107692,#107693)); +#107685 = ORIENTED_EDGE('',*,*,#107686,.T.); +#107686 = EDGE_CURVE('',#105422,#105358,#107687,.T.); +#107687 = LINE('',#107688,#107689); +#107688 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#107689 = VECTOR('',#107690,1.); +#107690 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107691 = ORIENTED_EDGE('',*,*,#105365,.T.); +#107692 = ORIENTED_EDGE('',*,*,#107669,.F.); +#107693 = ORIENTED_EDGE('',*,*,#105429,.F.); +#107694 = PLANE('',#107695); +#107695 = AXIS2_PLACEMENT_3D('',#107696,#107697,#107698); +#107696 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#107697 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107698 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107699 = ADVANCED_FACE('',(#107700),#107706,.T.); +#107700 = FACE_BOUND('',#107701,.T.); +#107701 = EDGE_LOOP('',(#107702,#107703,#107704,#107705)); +#107702 = ORIENTED_EDGE('',*,*,#105395,.T.); +#107703 = ORIENTED_EDGE('',*,*,#105357,.T.); +#107704 = ORIENTED_EDGE('',*,*,#107686,.F.); +#107705 = ORIENTED_EDGE('',*,*,#105421,.F.); +#107706 = PLANE('',#107707); +#107707 = AXIS2_PLACEMENT_3D('',#107708,#107709,#107710); +#107708 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#107709 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107710 = DIRECTION('',(0.,0.,-1.)); +#107711 = ADVANCED_FACE('',(#107712),#107723,.T.); +#107712 = FACE_BOUND('',#107713,.T.); +#107713 = EDGE_LOOP('',(#107714,#107720,#107721,#107722)); +#107714 = ORIENTED_EDGE('',*,*,#107715,.T.); +#107715 = EDGE_CURVE('',#105541,#105477,#107716,.T.); +#107716 = LINE('',#107717,#107718); +#107717 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#107718 = VECTOR('',#107719,1.); +#107719 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107720 = ORIENTED_EDGE('',*,*,#105476,.T.); +#107721 = ORIENTED_EDGE('',*,*,#105461,.F.); +#107722 = ORIENTED_EDGE('',*,*,#105540,.F.); +#107723 = PLANE('',#107724); +#107724 = AXIS2_PLACEMENT_3D('',#107725,#107726,#107727); +#107725 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#107726 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107727 = DIRECTION('',(0.,0.,1.)); +#107728 = ADVANCED_FACE('',(#107729),#107740,.T.); +#107729 = FACE_BOUND('',#107730,.T.); +#107730 = EDGE_LOOP('',(#107731,#107737,#107738,#107739)); +#107731 = ORIENTED_EDGE('',*,*,#107732,.T.); +#107732 = EDGE_CURVE('',#105566,#105502,#107733,.T.); +#107733 = LINE('',#107734,#107735); +#107734 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#107735 = VECTOR('',#107736,1.); +#107736 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107737 = ORIENTED_EDGE('',*,*,#105509,.T.); +#107738 = ORIENTED_EDGE('',*,*,#107715,.F.); +#107739 = ORIENTED_EDGE('',*,*,#105573,.F.); +#107740 = PLANE('',#107741); +#107741 = AXIS2_PLACEMENT_3D('',#107742,#107743,#107744); +#107742 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#107743 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107744 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107745 = ADVANCED_FACE('',(#107746),#107757,.T.); +#107746 = FACE_BOUND('',#107747,.T.); +#107747 = EDGE_LOOP('',(#107748,#107754,#107755,#107756)); +#107748 = ORIENTED_EDGE('',*,*,#107749,.T.); +#107749 = EDGE_CURVE('',#105558,#105494,#107750,.T.); +#107750 = LINE('',#107751,#107752); +#107751 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#107752 = VECTOR('',#107753,1.); +#107753 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107754 = ORIENTED_EDGE('',*,*,#105501,.T.); +#107755 = ORIENTED_EDGE('',*,*,#107732,.F.); +#107756 = ORIENTED_EDGE('',*,*,#105565,.T.); +#107757 = PLANE('',#107758); +#107758 = AXIS2_PLACEMENT_3D('',#107759,#107760,#107761); +#107759 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#107760 = DIRECTION('',(0.,-0.,-1.)); +#107761 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107762 = ADVANCED_FACE('',(#107763),#107774,.T.); +#107763 = FACE_BOUND('',#107764,.T.); +#107764 = EDGE_LOOP('',(#107765,#107771,#107772,#107773)); +#107765 = ORIENTED_EDGE('',*,*,#107766,.T.); +#107766 = EDGE_CURVE('',#105550,#105486,#107767,.T.); +#107767 = LINE('',#107768,#107769); +#107768 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#107769 = VECTOR('',#107770,1.); +#107770 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107771 = ORIENTED_EDGE('',*,*,#105493,.T.); +#107772 = ORIENTED_EDGE('',*,*,#107749,.F.); +#107773 = ORIENTED_EDGE('',*,*,#105557,.F.); +#107774 = PLANE('',#107775); +#107775 = AXIS2_PLACEMENT_3D('',#107776,#107777,#107778); +#107776 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#107777 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107778 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107779 = ADVANCED_FACE('',(#107780),#107786,.T.); +#107780 = FACE_BOUND('',#107781,.T.); +#107781 = EDGE_LOOP('',(#107782,#107783,#107784,#107785)); +#107782 = ORIENTED_EDGE('',*,*,#105523,.T.); +#107783 = ORIENTED_EDGE('',*,*,#105485,.T.); +#107784 = ORIENTED_EDGE('',*,*,#107766,.F.); +#107785 = ORIENTED_EDGE('',*,*,#105549,.F.); +#107786 = PLANE('',#107787); +#107787 = AXIS2_PLACEMENT_3D('',#107788,#107789,#107790); +#107788 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#107789 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107790 = DIRECTION('',(0.,0.,-1.)); +#107791 = ADVANCED_FACE('',(#107792),#107803,.T.); +#107792 = FACE_BOUND('',#107793,.T.); +#107793 = EDGE_LOOP('',(#107794,#107800,#107801,#107802)); +#107794 = ORIENTED_EDGE('',*,*,#107795,.T.); +#107795 = EDGE_CURVE('',#105669,#105605,#107796,.T.); +#107796 = LINE('',#107797,#107798); +#107797 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#107798 = VECTOR('',#107799,1.); +#107799 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107800 = ORIENTED_EDGE('',*,*,#105604,.T.); +#107801 = ORIENTED_EDGE('',*,*,#105589,.F.); +#107802 = ORIENTED_EDGE('',*,*,#105668,.F.); +#107803 = PLANE('',#107804); +#107804 = AXIS2_PLACEMENT_3D('',#107805,#107806,#107807); +#107805 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#107806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107807 = DIRECTION('',(0.,0.,1.)); +#107808 = ADVANCED_FACE('',(#107809),#107820,.T.); +#107809 = FACE_BOUND('',#107810,.T.); +#107810 = EDGE_LOOP('',(#107811,#107817,#107818,#107819)); +#107811 = ORIENTED_EDGE('',*,*,#107812,.T.); +#107812 = EDGE_CURVE('',#105694,#105630,#107813,.T.); +#107813 = LINE('',#107814,#107815); +#107814 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#107815 = VECTOR('',#107816,1.); +#107816 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107817 = ORIENTED_EDGE('',*,*,#105637,.T.); +#107818 = ORIENTED_EDGE('',*,*,#107795,.F.); +#107819 = ORIENTED_EDGE('',*,*,#105701,.F.); +#107820 = PLANE('',#107821); +#107821 = AXIS2_PLACEMENT_3D('',#107822,#107823,#107824); +#107822 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#107823 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107824 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107825 = ADVANCED_FACE('',(#107826),#107837,.T.); +#107826 = FACE_BOUND('',#107827,.T.); +#107827 = EDGE_LOOP('',(#107828,#107834,#107835,#107836)); +#107828 = ORIENTED_EDGE('',*,*,#107829,.T.); +#107829 = EDGE_CURVE('',#105686,#105622,#107830,.T.); +#107830 = LINE('',#107831,#107832); +#107831 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#107832 = VECTOR('',#107833,1.); +#107833 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107834 = ORIENTED_EDGE('',*,*,#105629,.T.); +#107835 = ORIENTED_EDGE('',*,*,#107812,.F.); +#107836 = ORIENTED_EDGE('',*,*,#105693,.T.); +#107837 = PLANE('',#107838); +#107838 = AXIS2_PLACEMENT_3D('',#107839,#107840,#107841); +#107839 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#107840 = DIRECTION('',(0.,-0.,-1.)); +#107841 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107842 = ADVANCED_FACE('',(#107843),#107854,.T.); +#107843 = FACE_BOUND('',#107844,.T.); +#107844 = EDGE_LOOP('',(#107845,#107851,#107852,#107853)); +#107845 = ORIENTED_EDGE('',*,*,#107846,.T.); +#107846 = EDGE_CURVE('',#105678,#105614,#107847,.T.); +#107847 = LINE('',#107848,#107849); +#107848 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#107849 = VECTOR('',#107850,1.); +#107850 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107851 = ORIENTED_EDGE('',*,*,#105621,.T.); +#107852 = ORIENTED_EDGE('',*,*,#107829,.F.); +#107853 = ORIENTED_EDGE('',*,*,#105685,.F.); +#107854 = PLANE('',#107855); +#107855 = AXIS2_PLACEMENT_3D('',#107856,#107857,#107858); +#107856 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#107857 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107858 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107859 = ADVANCED_FACE('',(#107860),#107866,.T.); +#107860 = FACE_BOUND('',#107861,.T.); +#107861 = EDGE_LOOP('',(#107862,#107863,#107864,#107865)); +#107862 = ORIENTED_EDGE('',*,*,#105651,.T.); +#107863 = ORIENTED_EDGE('',*,*,#105613,.T.); +#107864 = ORIENTED_EDGE('',*,*,#107846,.F.); +#107865 = ORIENTED_EDGE('',*,*,#105677,.F.); +#107866 = PLANE('',#107867); +#107867 = AXIS2_PLACEMENT_3D('',#107868,#107869,#107870); +#107868 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#107869 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107870 = DIRECTION('',(0.,0.,-1.)); +#107871 = ADVANCED_FACE('',(#107872),#107883,.T.); +#107872 = FACE_BOUND('',#107873,.T.); +#107873 = EDGE_LOOP('',(#107874,#107880,#107881,#107882)); +#107874 = ORIENTED_EDGE('',*,*,#107875,.T.); +#107875 = EDGE_CURVE('',#105797,#105733,#107876,.T.); +#107876 = LINE('',#107877,#107878); +#107877 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#107878 = VECTOR('',#107879,1.); +#107879 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107880 = ORIENTED_EDGE('',*,*,#105732,.T.); +#107881 = ORIENTED_EDGE('',*,*,#105717,.F.); +#107882 = ORIENTED_EDGE('',*,*,#105796,.F.); +#107883 = PLANE('',#107884); +#107884 = AXIS2_PLACEMENT_3D('',#107885,#107886,#107887); +#107885 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#107886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107887 = DIRECTION('',(0.,0.,1.)); +#107888 = ADVANCED_FACE('',(#107889),#107900,.T.); +#107889 = FACE_BOUND('',#107890,.T.); +#107890 = EDGE_LOOP('',(#107891,#107897,#107898,#107899)); +#107891 = ORIENTED_EDGE('',*,*,#107892,.T.); +#107892 = EDGE_CURVE('',#105822,#105758,#107893,.T.); +#107893 = LINE('',#107894,#107895); +#107894 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#107895 = VECTOR('',#107896,1.); +#107896 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107897 = ORIENTED_EDGE('',*,*,#105765,.T.); +#107898 = ORIENTED_EDGE('',*,*,#107875,.F.); +#107899 = ORIENTED_EDGE('',*,*,#105829,.F.); +#107900 = PLANE('',#107901); +#107901 = AXIS2_PLACEMENT_3D('',#107902,#107903,#107904); +#107902 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#107903 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107904 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107905 = ADVANCED_FACE('',(#107906),#107917,.T.); +#107906 = FACE_BOUND('',#107907,.T.); +#107907 = EDGE_LOOP('',(#107908,#107914,#107915,#107916)); +#107908 = ORIENTED_EDGE('',*,*,#107909,.T.); +#107909 = EDGE_CURVE('',#105814,#105750,#107910,.T.); +#107910 = LINE('',#107911,#107912); +#107911 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#107912 = VECTOR('',#107913,1.); +#107913 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107914 = ORIENTED_EDGE('',*,*,#105757,.T.); +#107915 = ORIENTED_EDGE('',*,*,#107892,.F.); +#107916 = ORIENTED_EDGE('',*,*,#105821,.T.); +#107917 = PLANE('',#107918); +#107918 = AXIS2_PLACEMENT_3D('',#107919,#107920,#107921); +#107919 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#107920 = DIRECTION('',(0.,-0.,-1.)); +#107921 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107922 = ADVANCED_FACE('',(#107923),#107934,.T.); +#107923 = FACE_BOUND('',#107924,.T.); +#107924 = EDGE_LOOP('',(#107925,#107931,#107932,#107933)); +#107925 = ORIENTED_EDGE('',*,*,#107926,.T.); +#107926 = EDGE_CURVE('',#105806,#105742,#107927,.T.); +#107927 = LINE('',#107928,#107929); +#107928 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#107929 = VECTOR('',#107930,1.); +#107930 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107931 = ORIENTED_EDGE('',*,*,#105749,.T.); +#107932 = ORIENTED_EDGE('',*,*,#107909,.F.); +#107933 = ORIENTED_EDGE('',*,*,#105813,.F.); +#107934 = PLANE('',#107935); +#107935 = AXIS2_PLACEMENT_3D('',#107936,#107937,#107938); +#107936 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#107937 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#107938 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#107939 = ADVANCED_FACE('',(#107940),#107946,.T.); +#107940 = FACE_BOUND('',#107941,.T.); +#107941 = EDGE_LOOP('',(#107942,#107943,#107944,#107945)); +#107942 = ORIENTED_EDGE('',*,*,#105779,.T.); +#107943 = ORIENTED_EDGE('',*,*,#105741,.T.); +#107944 = ORIENTED_EDGE('',*,*,#107926,.F.); +#107945 = ORIENTED_EDGE('',*,*,#105805,.F.); +#107946 = PLANE('',#107947); +#107947 = AXIS2_PLACEMENT_3D('',#107948,#107949,#107950); +#107948 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#107949 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#107950 = DIRECTION('',(0.,0.,-1.)); +#107951 = ADVANCED_FACE('',(#107952),#107963,.T.); +#107952 = FACE_BOUND('',#107953,.T.); +#107953 = EDGE_LOOP('',(#107954,#107960,#107961,#107962)); +#107954 = ORIENTED_EDGE('',*,*,#107955,.T.); +#107955 = EDGE_CURVE('',#105925,#105861,#107956,.T.); +#107956 = LINE('',#107957,#107958); +#107957 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#107958 = VECTOR('',#107959,1.); +#107959 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107960 = ORIENTED_EDGE('',*,*,#105860,.T.); +#107961 = ORIENTED_EDGE('',*,*,#105845,.F.); +#107962 = ORIENTED_EDGE('',*,*,#105924,.F.); +#107963 = PLANE('',#107964); +#107964 = AXIS2_PLACEMENT_3D('',#107965,#107966,#107967); +#107965 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#107966 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#107967 = DIRECTION('',(0.,0.,1.)); +#107968 = ADVANCED_FACE('',(#107969),#107980,.T.); +#107969 = FACE_BOUND('',#107970,.T.); +#107970 = EDGE_LOOP('',(#107971,#107977,#107978,#107979)); +#107971 = ORIENTED_EDGE('',*,*,#107972,.T.); +#107972 = EDGE_CURVE('',#105950,#105886,#107973,.T.); +#107973 = LINE('',#107974,#107975); +#107974 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#107975 = VECTOR('',#107976,1.); +#107976 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107977 = ORIENTED_EDGE('',*,*,#105893,.T.); +#107978 = ORIENTED_EDGE('',*,*,#107955,.F.); +#107979 = ORIENTED_EDGE('',*,*,#105957,.F.); +#107980 = PLANE('',#107981); +#107981 = AXIS2_PLACEMENT_3D('',#107982,#107983,#107984); +#107982 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#107983 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#107984 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#107985 = ADVANCED_FACE('',(#107986),#107997,.T.); +#107986 = FACE_BOUND('',#107987,.T.); +#107987 = EDGE_LOOP('',(#107988,#107994,#107995,#107996)); +#107988 = ORIENTED_EDGE('',*,*,#107989,.T.); +#107989 = EDGE_CURVE('',#105942,#105878,#107990,.T.); +#107990 = LINE('',#107991,#107992); +#107991 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#107992 = VECTOR('',#107993,1.); +#107993 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#107994 = ORIENTED_EDGE('',*,*,#105885,.T.); +#107995 = ORIENTED_EDGE('',*,*,#107972,.F.); +#107996 = ORIENTED_EDGE('',*,*,#105949,.T.); +#107997 = PLANE('',#107998); +#107998 = AXIS2_PLACEMENT_3D('',#107999,#108000,#108001); +#107999 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#108000 = DIRECTION('',(0.,-0.,-1.)); +#108001 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108002 = ADVANCED_FACE('',(#108003),#108014,.T.); +#108003 = FACE_BOUND('',#108004,.T.); +#108004 = EDGE_LOOP('',(#108005,#108011,#108012,#108013)); +#108005 = ORIENTED_EDGE('',*,*,#108006,.T.); +#108006 = EDGE_CURVE('',#105934,#105870,#108007,.T.); +#108007 = LINE('',#108008,#108009); +#108008 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#108009 = VECTOR('',#108010,1.); +#108010 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108011 = ORIENTED_EDGE('',*,*,#105877,.T.); +#108012 = ORIENTED_EDGE('',*,*,#107989,.F.); +#108013 = ORIENTED_EDGE('',*,*,#105941,.F.); +#108014 = PLANE('',#108015); +#108015 = AXIS2_PLACEMENT_3D('',#108016,#108017,#108018); +#108016 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#108017 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108018 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108019 = ADVANCED_FACE('',(#108020),#108026,.T.); +#108020 = FACE_BOUND('',#108021,.T.); +#108021 = EDGE_LOOP('',(#108022,#108023,#108024,#108025)); +#108022 = ORIENTED_EDGE('',*,*,#105907,.T.); +#108023 = ORIENTED_EDGE('',*,*,#105869,.T.); +#108024 = ORIENTED_EDGE('',*,*,#108006,.F.); +#108025 = ORIENTED_EDGE('',*,*,#105933,.F.); +#108026 = PLANE('',#108027); +#108027 = AXIS2_PLACEMENT_3D('',#108028,#108029,#108030); +#108028 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#108029 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108030 = DIRECTION('',(0.,0.,-1.)); +#108031 = ADVANCED_FACE('',(#108032),#108043,.T.); +#108032 = FACE_BOUND('',#108033,.T.); +#108033 = EDGE_LOOP('',(#108034,#108040,#108041,#108042)); +#108034 = ORIENTED_EDGE('',*,*,#108035,.T.); +#108035 = EDGE_CURVE('',#106053,#105989,#108036,.T.); +#108036 = LINE('',#108037,#108038); +#108037 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#108038 = VECTOR('',#108039,1.); +#108039 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108040 = ORIENTED_EDGE('',*,*,#105988,.T.); +#108041 = ORIENTED_EDGE('',*,*,#105973,.F.); +#108042 = ORIENTED_EDGE('',*,*,#106052,.F.); +#108043 = PLANE('',#108044); +#108044 = AXIS2_PLACEMENT_3D('',#108045,#108046,#108047); +#108045 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#108046 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108047 = DIRECTION('',(0.,0.,1.)); +#108048 = ADVANCED_FACE('',(#108049),#108060,.T.); +#108049 = FACE_BOUND('',#108050,.T.); +#108050 = EDGE_LOOP('',(#108051,#108057,#108058,#108059)); +#108051 = ORIENTED_EDGE('',*,*,#108052,.T.); +#108052 = EDGE_CURVE('',#106078,#106014,#108053,.T.); +#108053 = LINE('',#108054,#108055); +#108054 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#108055 = VECTOR('',#108056,1.); +#108056 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108057 = ORIENTED_EDGE('',*,*,#106021,.T.); +#108058 = ORIENTED_EDGE('',*,*,#108035,.F.); +#108059 = ORIENTED_EDGE('',*,*,#106085,.F.); +#108060 = PLANE('',#108061); +#108061 = AXIS2_PLACEMENT_3D('',#108062,#108063,#108064); +#108062 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#108063 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#108064 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#108065 = ADVANCED_FACE('',(#108066),#108077,.T.); +#108066 = FACE_BOUND('',#108067,.T.); +#108067 = EDGE_LOOP('',(#108068,#108074,#108075,#108076)); +#108068 = ORIENTED_EDGE('',*,*,#108069,.T.); +#108069 = EDGE_CURVE('',#106070,#106006,#108070,.T.); +#108070 = LINE('',#108071,#108072); +#108071 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#108072 = VECTOR('',#108073,1.); +#108073 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108074 = ORIENTED_EDGE('',*,*,#106013,.T.); +#108075 = ORIENTED_EDGE('',*,*,#108052,.F.); +#108076 = ORIENTED_EDGE('',*,*,#106077,.T.); +#108077 = PLANE('',#108078); +#108078 = AXIS2_PLACEMENT_3D('',#108079,#108080,#108081); +#108079 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#108080 = DIRECTION('',(0.,-0.,-1.)); +#108081 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108082 = ADVANCED_FACE('',(#108083),#108094,.T.); +#108083 = FACE_BOUND('',#108084,.T.); +#108084 = EDGE_LOOP('',(#108085,#108091,#108092,#108093)); +#108085 = ORIENTED_EDGE('',*,*,#108086,.T.); +#108086 = EDGE_CURVE('',#106062,#105998,#108087,.T.); +#108087 = LINE('',#108088,#108089); +#108088 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#108089 = VECTOR('',#108090,1.); +#108090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108091 = ORIENTED_EDGE('',*,*,#106005,.T.); +#108092 = ORIENTED_EDGE('',*,*,#108069,.F.); +#108093 = ORIENTED_EDGE('',*,*,#106069,.F.); +#108094 = PLANE('',#108095); +#108095 = AXIS2_PLACEMENT_3D('',#108096,#108097,#108098); +#108096 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#108097 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108098 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108099 = ADVANCED_FACE('',(#108100),#108106,.T.); +#108100 = FACE_BOUND('',#108101,.T.); +#108101 = EDGE_LOOP('',(#108102,#108103,#108104,#108105)); +#108102 = ORIENTED_EDGE('',*,*,#106035,.T.); +#108103 = ORIENTED_EDGE('',*,*,#105997,.T.); +#108104 = ORIENTED_EDGE('',*,*,#108086,.F.); +#108105 = ORIENTED_EDGE('',*,*,#106061,.F.); +#108106 = PLANE('',#108107); +#108107 = AXIS2_PLACEMENT_3D('',#108108,#108109,#108110); +#108108 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#108109 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108110 = DIRECTION('',(0.,0.,-1.)); +#108111 = ADVANCED_FACE('',(#108112),#108123,.T.); +#108112 = FACE_BOUND('',#108113,.T.); +#108113 = EDGE_LOOP('',(#108114,#108120,#108121,#108122)); +#108114 = ORIENTED_EDGE('',*,*,#108115,.T.); +#108115 = EDGE_CURVE('',#106181,#106117,#108116,.T.); +#108116 = LINE('',#108117,#108118); +#108117 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#108118 = VECTOR('',#108119,1.); +#108119 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108120 = ORIENTED_EDGE('',*,*,#106116,.T.); +#108121 = ORIENTED_EDGE('',*,*,#106101,.F.); +#108122 = ORIENTED_EDGE('',*,*,#106180,.F.); +#108123 = PLANE('',#108124); +#108124 = AXIS2_PLACEMENT_3D('',#108125,#108126,#108127); +#108125 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#108126 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108127 = DIRECTION('',(0.,0.,1.)); +#108128 = ADVANCED_FACE('',(#108129),#108140,.T.); +#108129 = FACE_BOUND('',#108130,.T.); +#108130 = EDGE_LOOP('',(#108131,#108137,#108138,#108139)); +#108131 = ORIENTED_EDGE('',*,*,#108132,.T.); +#108132 = EDGE_CURVE('',#106206,#106142,#108133,.T.); +#108133 = LINE('',#108134,#108135); +#108134 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#108135 = VECTOR('',#108136,1.); +#108136 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108137 = ORIENTED_EDGE('',*,*,#106149,.T.); +#108138 = ORIENTED_EDGE('',*,*,#108115,.F.); +#108139 = ORIENTED_EDGE('',*,*,#106213,.F.); +#108140 = PLANE('',#108141); +#108141 = AXIS2_PLACEMENT_3D('',#108142,#108143,#108144); +#108142 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#108143 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#108144 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#108145 = ADVANCED_FACE('',(#108146),#108157,.T.); +#108146 = FACE_BOUND('',#108147,.T.); +#108147 = EDGE_LOOP('',(#108148,#108154,#108155,#108156)); +#108148 = ORIENTED_EDGE('',*,*,#108149,.T.); +#108149 = EDGE_CURVE('',#106198,#106134,#108150,.T.); +#108150 = LINE('',#108151,#108152); +#108151 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#108152 = VECTOR('',#108153,1.); +#108153 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108154 = ORIENTED_EDGE('',*,*,#106141,.T.); +#108155 = ORIENTED_EDGE('',*,*,#108132,.F.); +#108156 = ORIENTED_EDGE('',*,*,#106205,.T.); +#108157 = PLANE('',#108158); +#108158 = AXIS2_PLACEMENT_3D('',#108159,#108160,#108161); +#108159 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#108160 = DIRECTION('',(0.,-0.,-1.)); +#108161 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108162 = ADVANCED_FACE('',(#108163),#108174,.T.); +#108163 = FACE_BOUND('',#108164,.T.); +#108164 = EDGE_LOOP('',(#108165,#108171,#108172,#108173)); +#108165 = ORIENTED_EDGE('',*,*,#108166,.T.); +#108166 = EDGE_CURVE('',#106190,#106126,#108167,.T.); +#108167 = LINE('',#108168,#108169); +#108168 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#108169 = VECTOR('',#108170,1.); +#108170 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108171 = ORIENTED_EDGE('',*,*,#106133,.T.); +#108172 = ORIENTED_EDGE('',*,*,#108149,.F.); +#108173 = ORIENTED_EDGE('',*,*,#106197,.F.); +#108174 = PLANE('',#108175); +#108175 = AXIS2_PLACEMENT_3D('',#108176,#108177,#108178); +#108176 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#108177 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108178 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108179 = ADVANCED_FACE('',(#108180),#108186,.T.); +#108180 = FACE_BOUND('',#108181,.T.); +#108181 = EDGE_LOOP('',(#108182,#108183,#108184,#108185)); +#108182 = ORIENTED_EDGE('',*,*,#106163,.T.); +#108183 = ORIENTED_EDGE('',*,*,#106125,.T.); +#108184 = ORIENTED_EDGE('',*,*,#108166,.F.); +#108185 = ORIENTED_EDGE('',*,*,#106189,.F.); +#108186 = PLANE('',#108187); +#108187 = AXIS2_PLACEMENT_3D('',#108188,#108189,#108190); +#108188 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#108189 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108190 = DIRECTION('',(0.,0.,-1.)); +#108191 = ADVANCED_FACE('',(#108192),#108203,.T.); +#108192 = FACE_BOUND('',#108193,.T.); +#108193 = EDGE_LOOP('',(#108194,#108200,#108201,#108202)); +#108194 = ORIENTED_EDGE('',*,*,#108195,.T.); +#108195 = EDGE_CURVE('',#106309,#106245,#108196,.T.); +#108196 = LINE('',#108197,#108198); +#108197 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#108198 = VECTOR('',#108199,1.); +#108199 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108200 = ORIENTED_EDGE('',*,*,#106244,.T.); +#108201 = ORIENTED_EDGE('',*,*,#106229,.F.); +#108202 = ORIENTED_EDGE('',*,*,#106308,.F.); +#108203 = PLANE('',#108204); +#108204 = AXIS2_PLACEMENT_3D('',#108205,#108206,#108207); +#108205 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#108206 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108207 = DIRECTION('',(0.,0.,1.)); +#108208 = ADVANCED_FACE('',(#108209),#108220,.T.); +#108209 = FACE_BOUND('',#108210,.T.); +#108210 = EDGE_LOOP('',(#108211,#108217,#108218,#108219)); +#108211 = ORIENTED_EDGE('',*,*,#108212,.T.); +#108212 = EDGE_CURVE('',#106334,#106270,#108213,.T.); +#108213 = LINE('',#108214,#108215); +#108214 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#108215 = VECTOR('',#108216,1.); +#108216 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108217 = ORIENTED_EDGE('',*,*,#106277,.T.); +#108218 = ORIENTED_EDGE('',*,*,#108195,.F.); +#108219 = ORIENTED_EDGE('',*,*,#106341,.F.); +#108220 = PLANE('',#108221); +#108221 = AXIS2_PLACEMENT_3D('',#108222,#108223,#108224); +#108222 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#108223 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#108224 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#108225 = ADVANCED_FACE('',(#108226),#108237,.T.); +#108226 = FACE_BOUND('',#108227,.T.); +#108227 = EDGE_LOOP('',(#108228,#108234,#108235,#108236)); +#108228 = ORIENTED_EDGE('',*,*,#108229,.T.); +#108229 = EDGE_CURVE('',#106326,#106262,#108230,.T.); +#108230 = LINE('',#108231,#108232); +#108231 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#108232 = VECTOR('',#108233,1.); +#108233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108234 = ORIENTED_EDGE('',*,*,#106269,.T.); +#108235 = ORIENTED_EDGE('',*,*,#108212,.F.); +#108236 = ORIENTED_EDGE('',*,*,#106333,.T.); +#108237 = PLANE('',#108238); +#108238 = AXIS2_PLACEMENT_3D('',#108239,#108240,#108241); +#108239 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#108240 = DIRECTION('',(0.,-0.,-1.)); +#108241 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108242 = ADVANCED_FACE('',(#108243),#108254,.T.); +#108243 = FACE_BOUND('',#108244,.T.); +#108244 = EDGE_LOOP('',(#108245,#108251,#108252,#108253)); +#108245 = ORIENTED_EDGE('',*,*,#108246,.T.); +#108246 = EDGE_CURVE('',#106318,#106254,#108247,.T.); +#108247 = LINE('',#108248,#108249); +#108248 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#108249 = VECTOR('',#108250,1.); +#108250 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108251 = ORIENTED_EDGE('',*,*,#106261,.T.); +#108252 = ORIENTED_EDGE('',*,*,#108229,.F.); +#108253 = ORIENTED_EDGE('',*,*,#106325,.F.); +#108254 = PLANE('',#108255); +#108255 = AXIS2_PLACEMENT_3D('',#108256,#108257,#108258); +#108256 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#108257 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#108258 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#108259 = ADVANCED_FACE('',(#108260),#108266,.T.); +#108260 = FACE_BOUND('',#108261,.T.); +#108261 = EDGE_LOOP('',(#108262,#108263,#108264,#108265)); +#108262 = ORIENTED_EDGE('',*,*,#106291,.T.); +#108263 = ORIENTED_EDGE('',*,*,#106253,.T.); +#108264 = ORIENTED_EDGE('',*,*,#108246,.F.); +#108265 = ORIENTED_EDGE('',*,*,#106317,.F.); +#108266 = PLANE('',#108267); +#108267 = AXIS2_PLACEMENT_3D('',#108268,#108269,#108270); +#108268 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#108269 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108270 = DIRECTION('',(0.,0.,-1.)); +#108271 = ADVANCED_FACE('',(#108272),#108283,.T.); +#108272 = FACE_BOUND('',#108273,.T.); +#108273 = EDGE_LOOP('',(#108274,#108275,#108276,#108277)); +#108274 = ORIENTED_EDGE('',*,*,#106500,.T.); +#108275 = ORIENTED_EDGE('',*,*,#106363,.T.); +#108276 = ORIENTED_EDGE('',*,*,#106388,.T.); +#108277 = ORIENTED_EDGE('',*,*,#108278,.T.); +#108278 = EDGE_CURVE('',#106389,#106493,#108279,.T.); +#108279 = LINE('',#108280,#108281); +#108280 = CARTESIAN_POINT('',(0.1,-17.78,0.9)); +#108281 = VECTOR('',#108282,1.); +#108282 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108283 = PLANE('',#108284); +#108284 = AXIS2_PLACEMENT_3D('',#108285,#108286,#108287); +#108285 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#108286 = DIRECTION('',(0.,0.,1.)); +#108287 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108288 = ADVANCED_FACE('',(#108289),#108300,.T.); +#108289 = FACE_BOUND('',#108290,.T.); +#108290 = EDGE_LOOP('',(#108291,#108292,#108298,#108299)); +#108291 = ORIENTED_EDGE('',*,*,#106468,.T.); +#108292 = ORIENTED_EDGE('',*,*,#108293,.F.); +#108293 = EDGE_CURVE('',#106413,#106469,#108294,.T.); +#108294 = LINE('',#108295,#108296); +#108295 = CARTESIAN_POINT('',(-0.1,-17.78,0.9)); +#108296 = VECTOR('',#108297,1.); +#108297 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108298 = ORIENTED_EDGE('',*,*,#106420,.T.); +#108299 = ORIENTED_EDGE('',*,*,#106443,.T.); +#108300 = PLANE('',#108301); +#108301 = AXIS2_PLACEMENT_3D('',#108302,#108303,#108304); +#108302 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#108303 = DIRECTION('',(0.,0.,1.)); +#108304 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108305 = ADVANCED_FACE('',(#108306),#108349,.T.); +#108306 = FACE_BOUND('',#108307,.T.); +#108307 = EDGE_LOOP('',(#108308,#108309,#108317,#108325,#108333,#108341, + #108347,#108348)); +#108308 = ORIENTED_EDGE('',*,*,#106476,.F.); +#108309 = ORIENTED_EDGE('',*,*,#108310,.T.); +#108310 = EDGE_CURVE('',#106477,#108311,#108313,.T.); +#108311 = VERTEX_POINT('',#108312); +#108312 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#108313 = LINE('',#108314,#108315); +#108314 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#108315 = VECTOR('',#108316,1.); +#108316 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108317 = ORIENTED_EDGE('',*,*,#108318,.T.); +#108318 = EDGE_CURVE('',#108311,#108319,#108321,.T.); +#108319 = VERTEX_POINT('',#108320); +#108320 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#108321 = LINE('',#108322,#108323); +#108322 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#108323 = VECTOR('',#108324,1.); +#108324 = DIRECTION('',(0.,0.,-1.)); +#108325 = ORIENTED_EDGE('',*,*,#108326,.T.); +#108326 = EDGE_CURVE('',#108319,#108327,#108329,.T.); +#108327 = VERTEX_POINT('',#108328); +#108328 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#108329 = LINE('',#108330,#108331); +#108330 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#108331 = VECTOR('',#108332,1.); +#108332 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108333 = ORIENTED_EDGE('',*,*,#108334,.T.); +#108334 = EDGE_CURVE('',#108327,#108335,#108337,.T.); +#108335 = VERTEX_POINT('',#108336); +#108336 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108337 = LINE('',#108338,#108339); +#108338 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#108339 = VECTOR('',#108340,1.); +#108340 = DIRECTION('',(0.,0.,1.)); +#108341 = ORIENTED_EDGE('',*,*,#108342,.T.); +#108342 = EDGE_CURVE('',#108335,#106405,#108343,.T.); +#108343 = LINE('',#108344,#108345); +#108344 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108345 = VECTOR('',#108346,1.); +#108346 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108347 = ORIENTED_EDGE('',*,*,#106412,.F.); +#108348 = ORIENTED_EDGE('',*,*,#108293,.T.); +#108349 = PLANE('',#108350); +#108350 = AXIS2_PLACEMENT_3D('',#108351,#108352,#108353); +#108351 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#108352 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108353 = DIRECTION('',(0.,0.,1.)); +#108354 = ADVANCED_FACE('',(#108355),#108373,.T.); +#108355 = FACE_BOUND('',#108356,.T.); +#108356 = EDGE_LOOP('',(#108357,#108365,#108371,#108372)); +#108357 = ORIENTED_EDGE('',*,*,#108358,.T.); +#108358 = EDGE_CURVE('',#108335,#108359,#108361,.T.); +#108359 = VERTEX_POINT('',#108360); +#108360 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#108361 = LINE('',#108362,#108363); +#108362 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108363 = VECTOR('',#108364,1.); +#108364 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108365 = ORIENTED_EDGE('',*,*,#108366,.T.); +#108366 = EDGE_CURVE('',#108359,#106397,#108367,.T.); +#108367 = LINE('',#108368,#108369); +#108368 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#108369 = VECTOR('',#108370,1.); +#108370 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108371 = ORIENTED_EDGE('',*,*,#106404,.F.); +#108372 = ORIENTED_EDGE('',*,*,#108342,.F.); +#108373 = PLANE('',#108374); +#108374 = AXIS2_PLACEMENT_3D('',#108375,#108376,#108377); +#108375 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#108376 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108377 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108378 = ADVANCED_FACE('',(#108379),#108415,.F.); +#108379 = FACE_BOUND('',#108380,.F.); +#108380 = EDGE_LOOP('',(#108381,#108382,#108390,#108398,#108406,#108412, + #108413,#108414)); +#108381 = ORIENTED_EDGE('',*,*,#106492,.F.); +#108382 = ORIENTED_EDGE('',*,*,#108383,.T.); +#108383 = EDGE_CURVE('',#106485,#108384,#108386,.T.); +#108384 = VERTEX_POINT('',#108385); +#108385 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#108386 = LINE('',#108387,#108388); +#108387 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#108388 = VECTOR('',#108389,1.); +#108389 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108390 = ORIENTED_EDGE('',*,*,#108391,.T.); +#108391 = EDGE_CURVE('',#108384,#108392,#108394,.T.); +#108392 = VERTEX_POINT('',#108393); +#108393 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#108394 = LINE('',#108395,#108396); +#108395 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#108396 = VECTOR('',#108397,1.); +#108397 = DIRECTION('',(0.,0.,-1.)); +#108398 = ORIENTED_EDGE('',*,*,#108399,.T.); +#108399 = EDGE_CURVE('',#108392,#108400,#108402,.T.); +#108400 = VERTEX_POINT('',#108401); +#108401 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#108402 = LINE('',#108403,#108404); +#108403 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#108404 = VECTOR('',#108405,1.); +#108405 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108406 = ORIENTED_EDGE('',*,*,#108407,.T.); +#108407 = EDGE_CURVE('',#108400,#108359,#108408,.T.); +#108408 = LINE('',#108409,#108410); +#108409 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#108410 = VECTOR('',#108411,1.); +#108411 = DIRECTION('',(0.,0.,1.)); +#108412 = ORIENTED_EDGE('',*,*,#108366,.T.); +#108413 = ORIENTED_EDGE('',*,*,#106396,.F.); +#108414 = ORIENTED_EDGE('',*,*,#108278,.T.); +#108415 = PLANE('',#108416); +#108416 = AXIS2_PLACEMENT_3D('',#108417,#108418,#108419); +#108417 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#108418 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108419 = DIRECTION('',(0.,0.,1.)); +#108420 = ADVANCED_FACE('',(#108421),#108432,.T.); +#108421 = FACE_BOUND('',#108422,.T.); +#108422 = EDGE_LOOP('',(#108423,#108424,#108425,#108431)); +#108423 = ORIENTED_EDGE('',*,*,#106484,.T.); +#108424 = ORIENTED_EDGE('',*,*,#108383,.T.); +#108425 = ORIENTED_EDGE('',*,*,#108426,.F.); +#108426 = EDGE_CURVE('',#108311,#108384,#108427,.T.); +#108427 = LINE('',#108428,#108429); +#108428 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#108429 = VECTOR('',#108430,1.); +#108430 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108431 = ORIENTED_EDGE('',*,*,#108310,.F.); +#108432 = PLANE('',#108433); +#108433 = AXIS2_PLACEMENT_3D('',#108434,#108435,#108436); +#108434 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#108435 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108436 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108437 = ADVANCED_FACE('',(#108438),#108449,.T.); +#108438 = FACE_BOUND('',#108439,.T.); +#108439 = EDGE_LOOP('',(#108440,#108441,#108442,#108443)); +#108440 = ORIENTED_EDGE('',*,*,#106660,.T.); +#108441 = ORIENTED_EDGE('',*,*,#106523,.T.); +#108442 = ORIENTED_EDGE('',*,*,#106548,.T.); +#108443 = ORIENTED_EDGE('',*,*,#108444,.T.); +#108444 = EDGE_CURVE('',#106549,#106653,#108445,.T.); +#108445 = LINE('',#108446,#108447); +#108446 = CARTESIAN_POINT('',(0.1,-15.24,0.9)); +#108447 = VECTOR('',#108448,1.); +#108448 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108449 = PLANE('',#108450); +#108450 = AXIS2_PLACEMENT_3D('',#108451,#108452,#108453); +#108451 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#108452 = DIRECTION('',(0.,0.,1.)); +#108453 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108454 = ADVANCED_FACE('',(#108455),#108466,.T.); +#108455 = FACE_BOUND('',#108456,.T.); +#108456 = EDGE_LOOP('',(#108457,#108458,#108464,#108465)); +#108457 = ORIENTED_EDGE('',*,*,#106628,.T.); +#108458 = ORIENTED_EDGE('',*,*,#108459,.F.); +#108459 = EDGE_CURVE('',#106573,#106629,#108460,.T.); +#108460 = LINE('',#108461,#108462); +#108461 = CARTESIAN_POINT('',(-0.1,-15.24,0.9)); +#108462 = VECTOR('',#108463,1.); +#108463 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108464 = ORIENTED_EDGE('',*,*,#106580,.T.); +#108465 = ORIENTED_EDGE('',*,*,#106603,.T.); +#108466 = PLANE('',#108467); +#108467 = AXIS2_PLACEMENT_3D('',#108468,#108469,#108470); +#108468 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#108469 = DIRECTION('',(0.,0.,1.)); +#108470 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108471 = ADVANCED_FACE('',(#108472),#108515,.T.); +#108472 = FACE_BOUND('',#108473,.T.); +#108473 = EDGE_LOOP('',(#108474,#108475,#108483,#108491,#108499,#108507, + #108513,#108514)); +#108474 = ORIENTED_EDGE('',*,*,#106636,.F.); +#108475 = ORIENTED_EDGE('',*,*,#108476,.T.); +#108476 = EDGE_CURVE('',#106637,#108477,#108479,.T.); +#108477 = VERTEX_POINT('',#108478); +#108478 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#108479 = LINE('',#108480,#108481); +#108480 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#108481 = VECTOR('',#108482,1.); +#108482 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108483 = ORIENTED_EDGE('',*,*,#108484,.T.); +#108484 = EDGE_CURVE('',#108477,#108485,#108487,.T.); +#108485 = VERTEX_POINT('',#108486); +#108486 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#108487 = LINE('',#108488,#108489); +#108488 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#108489 = VECTOR('',#108490,1.); +#108490 = DIRECTION('',(0.,0.,-1.)); +#108491 = ORIENTED_EDGE('',*,*,#108492,.T.); +#108492 = EDGE_CURVE('',#108485,#108493,#108495,.T.); +#108493 = VERTEX_POINT('',#108494); +#108494 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#108495 = LINE('',#108496,#108497); +#108496 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#108497 = VECTOR('',#108498,1.); +#108498 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108499 = ORIENTED_EDGE('',*,*,#108500,.T.); +#108500 = EDGE_CURVE('',#108493,#108501,#108503,.T.); +#108501 = VERTEX_POINT('',#108502); +#108502 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108503 = LINE('',#108504,#108505); +#108504 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#108505 = VECTOR('',#108506,1.); +#108506 = DIRECTION('',(0.,0.,1.)); +#108507 = ORIENTED_EDGE('',*,*,#108508,.T.); +#108508 = EDGE_CURVE('',#108501,#106565,#108509,.T.); +#108509 = LINE('',#108510,#108511); +#108510 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108511 = VECTOR('',#108512,1.); +#108512 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108513 = ORIENTED_EDGE('',*,*,#106572,.F.); +#108514 = ORIENTED_EDGE('',*,*,#108459,.T.); +#108515 = PLANE('',#108516); +#108516 = AXIS2_PLACEMENT_3D('',#108517,#108518,#108519); +#108517 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#108518 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108519 = DIRECTION('',(0.,0.,1.)); +#108520 = ADVANCED_FACE('',(#108521),#108539,.T.); +#108521 = FACE_BOUND('',#108522,.T.); +#108522 = EDGE_LOOP('',(#108523,#108531,#108537,#108538)); +#108523 = ORIENTED_EDGE('',*,*,#108524,.T.); +#108524 = EDGE_CURVE('',#108501,#108525,#108527,.T.); +#108525 = VERTEX_POINT('',#108526); +#108526 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#108527 = LINE('',#108528,#108529); +#108528 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108529 = VECTOR('',#108530,1.); +#108530 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108531 = ORIENTED_EDGE('',*,*,#108532,.T.); +#108532 = EDGE_CURVE('',#108525,#106557,#108533,.T.); +#108533 = LINE('',#108534,#108535); +#108534 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#108535 = VECTOR('',#108536,1.); +#108536 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108537 = ORIENTED_EDGE('',*,*,#106564,.F.); +#108538 = ORIENTED_EDGE('',*,*,#108508,.F.); +#108539 = PLANE('',#108540); +#108540 = AXIS2_PLACEMENT_3D('',#108541,#108542,#108543); +#108541 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#108542 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108543 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108544 = ADVANCED_FACE('',(#108545),#108581,.F.); +#108545 = FACE_BOUND('',#108546,.F.); +#108546 = EDGE_LOOP('',(#108547,#108548,#108556,#108564,#108572,#108578, + #108579,#108580)); +#108547 = ORIENTED_EDGE('',*,*,#106652,.F.); +#108548 = ORIENTED_EDGE('',*,*,#108549,.T.); +#108549 = EDGE_CURVE('',#106645,#108550,#108552,.T.); +#108550 = VERTEX_POINT('',#108551); +#108551 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#108552 = LINE('',#108553,#108554); +#108553 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#108554 = VECTOR('',#108555,1.); +#108555 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108556 = ORIENTED_EDGE('',*,*,#108557,.T.); +#108557 = EDGE_CURVE('',#108550,#108558,#108560,.T.); +#108558 = VERTEX_POINT('',#108559); +#108559 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#108560 = LINE('',#108561,#108562); +#108561 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#108562 = VECTOR('',#108563,1.); +#108563 = DIRECTION('',(0.,0.,-1.)); +#108564 = ORIENTED_EDGE('',*,*,#108565,.T.); +#108565 = EDGE_CURVE('',#108558,#108566,#108568,.T.); +#108566 = VERTEX_POINT('',#108567); +#108567 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#108568 = LINE('',#108569,#108570); +#108569 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#108570 = VECTOR('',#108571,1.); +#108571 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108572 = ORIENTED_EDGE('',*,*,#108573,.T.); +#108573 = EDGE_CURVE('',#108566,#108525,#108574,.T.); +#108574 = LINE('',#108575,#108576); +#108575 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#108576 = VECTOR('',#108577,1.); +#108577 = DIRECTION('',(0.,0.,1.)); +#108578 = ORIENTED_EDGE('',*,*,#108532,.T.); +#108579 = ORIENTED_EDGE('',*,*,#106556,.F.); +#108580 = ORIENTED_EDGE('',*,*,#108444,.T.); +#108581 = PLANE('',#108582); +#108582 = AXIS2_PLACEMENT_3D('',#108583,#108584,#108585); +#108583 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#108584 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108585 = DIRECTION('',(0.,0.,1.)); +#108586 = ADVANCED_FACE('',(#108587),#108598,.T.); +#108587 = FACE_BOUND('',#108588,.T.); +#108588 = EDGE_LOOP('',(#108589,#108590,#108591,#108597)); +#108589 = ORIENTED_EDGE('',*,*,#106644,.T.); +#108590 = ORIENTED_EDGE('',*,*,#108549,.T.); +#108591 = ORIENTED_EDGE('',*,*,#108592,.F.); +#108592 = EDGE_CURVE('',#108477,#108550,#108593,.T.); +#108593 = LINE('',#108594,#108595); +#108594 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#108595 = VECTOR('',#108596,1.); +#108596 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108597 = ORIENTED_EDGE('',*,*,#108476,.F.); +#108598 = PLANE('',#108599); +#108599 = AXIS2_PLACEMENT_3D('',#108600,#108601,#108602); +#108600 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#108601 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108602 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108603 = ADVANCED_FACE('',(#108604),#108615,.T.); +#108604 = FACE_BOUND('',#108605,.T.); +#108605 = EDGE_LOOP('',(#108606,#108607,#108608,#108609)); +#108606 = ORIENTED_EDGE('',*,*,#106820,.T.); +#108607 = ORIENTED_EDGE('',*,*,#106683,.T.); +#108608 = ORIENTED_EDGE('',*,*,#106708,.T.); +#108609 = ORIENTED_EDGE('',*,*,#108610,.T.); +#108610 = EDGE_CURVE('',#106709,#106813,#108611,.T.); +#108611 = LINE('',#108612,#108613); +#108612 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#108613 = VECTOR('',#108614,1.); +#108614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108615 = PLANE('',#108616); +#108616 = AXIS2_PLACEMENT_3D('',#108617,#108618,#108619); +#108617 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#108618 = DIRECTION('',(0.,0.,1.)); +#108619 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108620 = ADVANCED_FACE('',(#108621),#108632,.T.); +#108621 = FACE_BOUND('',#108622,.T.); +#108622 = EDGE_LOOP('',(#108623,#108624,#108630,#108631)); +#108623 = ORIENTED_EDGE('',*,*,#106788,.T.); +#108624 = ORIENTED_EDGE('',*,*,#108625,.F.); +#108625 = EDGE_CURVE('',#106733,#106789,#108626,.T.); +#108626 = LINE('',#108627,#108628); +#108627 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#108628 = VECTOR('',#108629,1.); +#108629 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108630 = ORIENTED_EDGE('',*,*,#106740,.T.); +#108631 = ORIENTED_EDGE('',*,*,#106763,.T.); +#108632 = PLANE('',#108633); +#108633 = AXIS2_PLACEMENT_3D('',#108634,#108635,#108636); +#108634 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#108635 = DIRECTION('',(0.,0.,1.)); +#108636 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108637 = ADVANCED_FACE('',(#108638),#108681,.T.); +#108638 = FACE_BOUND('',#108639,.T.); +#108639 = EDGE_LOOP('',(#108640,#108641,#108649,#108657,#108665,#108673, + #108679,#108680)); +#108640 = ORIENTED_EDGE('',*,*,#106796,.F.); +#108641 = ORIENTED_EDGE('',*,*,#108642,.T.); +#108642 = EDGE_CURVE('',#106797,#108643,#108645,.T.); +#108643 = VERTEX_POINT('',#108644); +#108644 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#108645 = LINE('',#108646,#108647); +#108646 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#108647 = VECTOR('',#108648,1.); +#108648 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108649 = ORIENTED_EDGE('',*,*,#108650,.T.); +#108650 = EDGE_CURVE('',#108643,#108651,#108653,.T.); +#108651 = VERTEX_POINT('',#108652); +#108652 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#108653 = LINE('',#108654,#108655); +#108654 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#108655 = VECTOR('',#108656,1.); +#108656 = DIRECTION('',(0.,0.,-1.)); +#108657 = ORIENTED_EDGE('',*,*,#108658,.T.); +#108658 = EDGE_CURVE('',#108651,#108659,#108661,.T.); +#108659 = VERTEX_POINT('',#108660); +#108660 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#108661 = LINE('',#108662,#108663); +#108662 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#108663 = VECTOR('',#108664,1.); +#108664 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108665 = ORIENTED_EDGE('',*,*,#108666,.T.); +#108666 = EDGE_CURVE('',#108659,#108667,#108669,.T.); +#108667 = VERTEX_POINT('',#108668); +#108668 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108669 = LINE('',#108670,#108671); +#108670 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#108671 = VECTOR('',#108672,1.); +#108672 = DIRECTION('',(0.,0.,1.)); +#108673 = ORIENTED_EDGE('',*,*,#108674,.T.); +#108674 = EDGE_CURVE('',#108667,#106725,#108675,.T.); +#108675 = LINE('',#108676,#108677); +#108676 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108677 = VECTOR('',#108678,1.); +#108678 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108679 = ORIENTED_EDGE('',*,*,#106732,.F.); +#108680 = ORIENTED_EDGE('',*,*,#108625,.T.); +#108681 = PLANE('',#108682); +#108682 = AXIS2_PLACEMENT_3D('',#108683,#108684,#108685); +#108683 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#108684 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108685 = DIRECTION('',(0.,0.,1.)); +#108686 = ADVANCED_FACE('',(#108687),#108705,.T.); +#108687 = FACE_BOUND('',#108688,.T.); +#108688 = EDGE_LOOP('',(#108689,#108697,#108703,#108704)); +#108689 = ORIENTED_EDGE('',*,*,#108690,.T.); +#108690 = EDGE_CURVE('',#108667,#108691,#108693,.T.); +#108691 = VERTEX_POINT('',#108692); +#108692 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#108693 = LINE('',#108694,#108695); +#108694 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108695 = VECTOR('',#108696,1.); +#108696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108697 = ORIENTED_EDGE('',*,*,#108698,.T.); +#108698 = EDGE_CURVE('',#108691,#106717,#108699,.T.); +#108699 = LINE('',#108700,#108701); +#108700 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#108701 = VECTOR('',#108702,1.); +#108702 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108703 = ORIENTED_EDGE('',*,*,#106724,.F.); +#108704 = ORIENTED_EDGE('',*,*,#108674,.F.); +#108705 = PLANE('',#108706); +#108706 = AXIS2_PLACEMENT_3D('',#108707,#108708,#108709); +#108707 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#108708 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108709 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108710 = ADVANCED_FACE('',(#108711),#108747,.F.); +#108711 = FACE_BOUND('',#108712,.F.); +#108712 = EDGE_LOOP('',(#108713,#108714,#108722,#108730,#108738,#108744, + #108745,#108746)); +#108713 = ORIENTED_EDGE('',*,*,#106812,.F.); +#108714 = ORIENTED_EDGE('',*,*,#108715,.T.); +#108715 = EDGE_CURVE('',#106805,#108716,#108718,.T.); +#108716 = VERTEX_POINT('',#108717); +#108717 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#108718 = LINE('',#108719,#108720); +#108719 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#108720 = VECTOR('',#108721,1.); +#108721 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108722 = ORIENTED_EDGE('',*,*,#108723,.T.); +#108723 = EDGE_CURVE('',#108716,#108724,#108726,.T.); +#108724 = VERTEX_POINT('',#108725); +#108725 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#108726 = LINE('',#108727,#108728); +#108727 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#108728 = VECTOR('',#108729,1.); +#108729 = DIRECTION('',(0.,0.,-1.)); +#108730 = ORIENTED_EDGE('',*,*,#108731,.T.); +#108731 = EDGE_CURVE('',#108724,#108732,#108734,.T.); +#108732 = VERTEX_POINT('',#108733); +#108733 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#108734 = LINE('',#108735,#108736); +#108735 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#108736 = VECTOR('',#108737,1.); +#108737 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108738 = ORIENTED_EDGE('',*,*,#108739,.T.); +#108739 = EDGE_CURVE('',#108732,#108691,#108740,.T.); +#108740 = LINE('',#108741,#108742); +#108741 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#108742 = VECTOR('',#108743,1.); +#108743 = DIRECTION('',(0.,0.,1.)); +#108744 = ORIENTED_EDGE('',*,*,#108698,.T.); +#108745 = ORIENTED_EDGE('',*,*,#106716,.F.); +#108746 = ORIENTED_EDGE('',*,*,#108610,.T.); +#108747 = PLANE('',#108748); +#108748 = AXIS2_PLACEMENT_3D('',#108749,#108750,#108751); +#108749 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#108750 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108751 = DIRECTION('',(0.,0.,1.)); +#108752 = ADVANCED_FACE('',(#108753),#108764,.T.); +#108753 = FACE_BOUND('',#108754,.T.); +#108754 = EDGE_LOOP('',(#108755,#108756,#108757,#108763)); +#108755 = ORIENTED_EDGE('',*,*,#106804,.T.); +#108756 = ORIENTED_EDGE('',*,*,#108715,.T.); +#108757 = ORIENTED_EDGE('',*,*,#108758,.F.); +#108758 = EDGE_CURVE('',#108643,#108716,#108759,.T.); +#108759 = LINE('',#108760,#108761); +#108760 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#108761 = VECTOR('',#108762,1.); +#108762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108763 = ORIENTED_EDGE('',*,*,#108642,.F.); +#108764 = PLANE('',#108765); +#108765 = AXIS2_PLACEMENT_3D('',#108766,#108767,#108768); +#108766 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#108767 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108768 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108769 = ADVANCED_FACE('',(#108770),#108781,.T.); +#108770 = FACE_BOUND('',#108771,.T.); +#108771 = EDGE_LOOP('',(#108772,#108773,#108774,#108775)); +#108772 = ORIENTED_EDGE('',*,*,#106980,.T.); +#108773 = ORIENTED_EDGE('',*,*,#106843,.T.); +#108774 = ORIENTED_EDGE('',*,*,#106868,.T.); +#108775 = ORIENTED_EDGE('',*,*,#108776,.T.); +#108776 = EDGE_CURVE('',#106869,#106973,#108777,.T.); +#108777 = LINE('',#108778,#108779); +#108778 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#108779 = VECTOR('',#108780,1.); +#108780 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108781 = PLANE('',#108782); +#108782 = AXIS2_PLACEMENT_3D('',#108783,#108784,#108785); +#108783 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#108784 = DIRECTION('',(0.,0.,1.)); +#108785 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108786 = ADVANCED_FACE('',(#108787),#108798,.T.); +#108787 = FACE_BOUND('',#108788,.T.); +#108788 = EDGE_LOOP('',(#108789,#108790,#108796,#108797)); +#108789 = ORIENTED_EDGE('',*,*,#106948,.T.); +#108790 = ORIENTED_EDGE('',*,*,#108791,.F.); +#108791 = EDGE_CURVE('',#106893,#106949,#108792,.T.); +#108792 = LINE('',#108793,#108794); +#108793 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#108794 = VECTOR('',#108795,1.); +#108795 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108796 = ORIENTED_EDGE('',*,*,#106900,.T.); +#108797 = ORIENTED_EDGE('',*,*,#106923,.T.); +#108798 = PLANE('',#108799); +#108799 = AXIS2_PLACEMENT_3D('',#108800,#108801,#108802); +#108800 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#108801 = DIRECTION('',(0.,0.,1.)); +#108802 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108803 = ADVANCED_FACE('',(#108804),#108847,.T.); +#108804 = FACE_BOUND('',#108805,.T.); +#108805 = EDGE_LOOP('',(#108806,#108807,#108815,#108823,#108831,#108839, + #108845,#108846)); +#108806 = ORIENTED_EDGE('',*,*,#106956,.F.); +#108807 = ORIENTED_EDGE('',*,*,#108808,.T.); +#108808 = EDGE_CURVE('',#106957,#108809,#108811,.T.); +#108809 = VERTEX_POINT('',#108810); +#108810 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#108811 = LINE('',#108812,#108813); +#108812 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#108813 = VECTOR('',#108814,1.); +#108814 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108815 = ORIENTED_EDGE('',*,*,#108816,.T.); +#108816 = EDGE_CURVE('',#108809,#108817,#108819,.T.); +#108817 = VERTEX_POINT('',#108818); +#108818 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#108819 = LINE('',#108820,#108821); +#108820 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#108821 = VECTOR('',#108822,1.); +#108822 = DIRECTION('',(0.,0.,-1.)); +#108823 = ORIENTED_EDGE('',*,*,#108824,.T.); +#108824 = EDGE_CURVE('',#108817,#108825,#108827,.T.); +#108825 = VERTEX_POINT('',#108826); +#108826 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#108827 = LINE('',#108828,#108829); +#108828 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#108829 = VECTOR('',#108830,1.); +#108830 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108831 = ORIENTED_EDGE('',*,*,#108832,.T.); +#108832 = EDGE_CURVE('',#108825,#108833,#108835,.T.); +#108833 = VERTEX_POINT('',#108834); +#108834 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108835 = LINE('',#108836,#108837); +#108836 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#108837 = VECTOR('',#108838,1.); +#108838 = DIRECTION('',(0.,0.,1.)); +#108839 = ORIENTED_EDGE('',*,*,#108840,.T.); +#108840 = EDGE_CURVE('',#108833,#106885,#108841,.T.); +#108841 = LINE('',#108842,#108843); +#108842 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108843 = VECTOR('',#108844,1.); +#108844 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108845 = ORIENTED_EDGE('',*,*,#106892,.F.); +#108846 = ORIENTED_EDGE('',*,*,#108791,.T.); +#108847 = PLANE('',#108848); +#108848 = AXIS2_PLACEMENT_3D('',#108849,#108850,#108851); +#108849 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#108850 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108851 = DIRECTION('',(0.,0.,1.)); +#108852 = ADVANCED_FACE('',(#108853),#108871,.T.); +#108853 = FACE_BOUND('',#108854,.T.); +#108854 = EDGE_LOOP('',(#108855,#108863,#108869,#108870)); +#108855 = ORIENTED_EDGE('',*,*,#108856,.T.); +#108856 = EDGE_CURVE('',#108833,#108857,#108859,.T.); +#108857 = VERTEX_POINT('',#108858); +#108858 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#108859 = LINE('',#108860,#108861); +#108860 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108861 = VECTOR('',#108862,1.); +#108862 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108863 = ORIENTED_EDGE('',*,*,#108864,.T.); +#108864 = EDGE_CURVE('',#108857,#106877,#108865,.T.); +#108865 = LINE('',#108866,#108867); +#108866 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#108867 = VECTOR('',#108868,1.); +#108868 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108869 = ORIENTED_EDGE('',*,*,#106884,.F.); +#108870 = ORIENTED_EDGE('',*,*,#108840,.F.); +#108871 = PLANE('',#108872); +#108872 = AXIS2_PLACEMENT_3D('',#108873,#108874,#108875); +#108873 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#108874 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#108875 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108876 = ADVANCED_FACE('',(#108877),#108913,.F.); +#108877 = FACE_BOUND('',#108878,.F.); +#108878 = EDGE_LOOP('',(#108879,#108880,#108888,#108896,#108904,#108910, + #108911,#108912)); +#108879 = ORIENTED_EDGE('',*,*,#106972,.F.); +#108880 = ORIENTED_EDGE('',*,*,#108881,.T.); +#108881 = EDGE_CURVE('',#106965,#108882,#108884,.T.); +#108882 = VERTEX_POINT('',#108883); +#108883 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#108884 = LINE('',#108885,#108886); +#108885 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#108886 = VECTOR('',#108887,1.); +#108887 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108888 = ORIENTED_EDGE('',*,*,#108889,.T.); +#108889 = EDGE_CURVE('',#108882,#108890,#108892,.T.); +#108890 = VERTEX_POINT('',#108891); +#108891 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#108892 = LINE('',#108893,#108894); +#108893 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#108894 = VECTOR('',#108895,1.); +#108895 = DIRECTION('',(0.,0.,-1.)); +#108896 = ORIENTED_EDGE('',*,*,#108897,.T.); +#108897 = EDGE_CURVE('',#108890,#108898,#108900,.T.); +#108898 = VERTEX_POINT('',#108899); +#108899 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#108900 = LINE('',#108901,#108902); +#108901 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#108902 = VECTOR('',#108903,1.); +#108903 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108904 = ORIENTED_EDGE('',*,*,#108905,.T.); +#108905 = EDGE_CURVE('',#108898,#108857,#108906,.T.); +#108906 = LINE('',#108907,#108908); +#108907 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#108908 = VECTOR('',#108909,1.); +#108909 = DIRECTION('',(0.,0.,1.)); +#108910 = ORIENTED_EDGE('',*,*,#108864,.T.); +#108911 = ORIENTED_EDGE('',*,*,#106876,.F.); +#108912 = ORIENTED_EDGE('',*,*,#108776,.T.); +#108913 = PLANE('',#108914); +#108914 = AXIS2_PLACEMENT_3D('',#108915,#108916,#108917); +#108915 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#108916 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#108917 = DIRECTION('',(0.,0.,1.)); +#108918 = ADVANCED_FACE('',(#108919),#108930,.T.); +#108919 = FACE_BOUND('',#108920,.T.); +#108920 = EDGE_LOOP('',(#108921,#108922,#108923,#108929)); +#108921 = ORIENTED_EDGE('',*,*,#106964,.T.); +#108922 = ORIENTED_EDGE('',*,*,#108881,.T.); +#108923 = ORIENTED_EDGE('',*,*,#108924,.F.); +#108924 = EDGE_CURVE('',#108809,#108882,#108925,.T.); +#108925 = LINE('',#108926,#108927); +#108926 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#108927 = VECTOR('',#108928,1.); +#108928 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#108929 = ORIENTED_EDGE('',*,*,#108808,.F.); +#108930 = PLANE('',#108931); +#108931 = AXIS2_PLACEMENT_3D('',#108932,#108933,#108934); +#108932 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#108933 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#108934 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108935 = ADVANCED_FACE('',(#108936),#108947,.T.); +#108936 = FACE_BOUND('',#108937,.T.); +#108937 = EDGE_LOOP('',(#108938,#108939,#108940,#108941)); +#108938 = ORIENTED_EDGE('',*,*,#107140,.T.); +#108939 = ORIENTED_EDGE('',*,*,#107003,.T.); +#108940 = ORIENTED_EDGE('',*,*,#107028,.T.); +#108941 = ORIENTED_EDGE('',*,*,#108942,.T.); +#108942 = EDGE_CURVE('',#107029,#107133,#108943,.T.); +#108943 = LINE('',#108944,#108945); +#108944 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#108945 = VECTOR('',#108946,1.); +#108946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108947 = PLANE('',#108948); +#108948 = AXIS2_PLACEMENT_3D('',#108949,#108950,#108951); +#108949 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#108950 = DIRECTION('',(0.,0.,1.)); +#108951 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108952 = ADVANCED_FACE('',(#108953),#108964,.T.); +#108953 = FACE_BOUND('',#108954,.T.); +#108954 = EDGE_LOOP('',(#108955,#108956,#108962,#108963)); +#108955 = ORIENTED_EDGE('',*,*,#107108,.T.); +#108956 = ORIENTED_EDGE('',*,*,#108957,.F.); +#108957 = EDGE_CURVE('',#107053,#107109,#108958,.T.); +#108958 = LINE('',#108959,#108960); +#108959 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#108960 = VECTOR('',#108961,1.); +#108961 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#108962 = ORIENTED_EDGE('',*,*,#107060,.T.); +#108963 = ORIENTED_EDGE('',*,*,#107083,.T.); +#108964 = PLANE('',#108965); +#108965 = AXIS2_PLACEMENT_3D('',#108966,#108967,#108968); +#108966 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#108967 = DIRECTION('',(0.,0.,1.)); +#108968 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#108969 = ADVANCED_FACE('',(#108970),#109013,.T.); +#108970 = FACE_BOUND('',#108971,.T.); +#108971 = EDGE_LOOP('',(#108972,#108973,#108981,#108989,#108997,#109005, + #109011,#109012)); +#108972 = ORIENTED_EDGE('',*,*,#107116,.F.); +#108973 = ORIENTED_EDGE('',*,*,#108974,.T.); +#108974 = EDGE_CURVE('',#107117,#108975,#108977,.T.); +#108975 = VERTEX_POINT('',#108976); +#108976 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#108977 = LINE('',#108978,#108979); +#108978 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#108979 = VECTOR('',#108980,1.); +#108980 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#108981 = ORIENTED_EDGE('',*,*,#108982,.T.); +#108982 = EDGE_CURVE('',#108975,#108983,#108985,.T.); +#108983 = VERTEX_POINT('',#108984); +#108984 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#108985 = LINE('',#108986,#108987); +#108986 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#108987 = VECTOR('',#108988,1.); +#108988 = DIRECTION('',(0.,0.,-1.)); +#108989 = ORIENTED_EDGE('',*,*,#108990,.T.); +#108990 = EDGE_CURVE('',#108983,#108991,#108993,.T.); +#108991 = VERTEX_POINT('',#108992); +#108992 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#108993 = LINE('',#108994,#108995); +#108994 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#108995 = VECTOR('',#108996,1.); +#108996 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#108997 = ORIENTED_EDGE('',*,*,#108998,.T.); +#108998 = EDGE_CURVE('',#108991,#108999,#109001,.T.); +#108999 = VERTEX_POINT('',#109000); +#109000 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109001 = LINE('',#109002,#109003); +#109002 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#109003 = VECTOR('',#109004,1.); +#109004 = DIRECTION('',(0.,0.,1.)); +#109005 = ORIENTED_EDGE('',*,*,#109006,.T.); +#109006 = EDGE_CURVE('',#108999,#107045,#109007,.T.); +#109007 = LINE('',#109008,#109009); +#109008 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109009 = VECTOR('',#109010,1.); +#109010 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109011 = ORIENTED_EDGE('',*,*,#107052,.F.); +#109012 = ORIENTED_EDGE('',*,*,#108957,.T.); +#109013 = PLANE('',#109014); +#109014 = AXIS2_PLACEMENT_3D('',#109015,#109016,#109017); +#109015 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#109016 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109017 = DIRECTION('',(0.,0.,1.)); +#109018 = ADVANCED_FACE('',(#109019),#109037,.T.); +#109019 = FACE_BOUND('',#109020,.T.); +#109020 = EDGE_LOOP('',(#109021,#109029,#109035,#109036)); +#109021 = ORIENTED_EDGE('',*,*,#109022,.T.); +#109022 = EDGE_CURVE('',#108999,#109023,#109025,.T.); +#109023 = VERTEX_POINT('',#109024); +#109024 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#109025 = LINE('',#109026,#109027); +#109026 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109027 = VECTOR('',#109028,1.); +#109028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109029 = ORIENTED_EDGE('',*,*,#109030,.T.); +#109030 = EDGE_CURVE('',#109023,#107037,#109031,.T.); +#109031 = LINE('',#109032,#109033); +#109032 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#109033 = VECTOR('',#109034,1.); +#109034 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109035 = ORIENTED_EDGE('',*,*,#107044,.F.); +#109036 = ORIENTED_EDGE('',*,*,#109006,.F.); +#109037 = PLANE('',#109038); +#109038 = AXIS2_PLACEMENT_3D('',#109039,#109040,#109041); +#109039 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#109040 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109041 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109042 = ADVANCED_FACE('',(#109043),#109079,.F.); +#109043 = FACE_BOUND('',#109044,.F.); +#109044 = EDGE_LOOP('',(#109045,#109046,#109054,#109062,#109070,#109076, + #109077,#109078)); +#109045 = ORIENTED_EDGE('',*,*,#107132,.F.); +#109046 = ORIENTED_EDGE('',*,*,#109047,.T.); +#109047 = EDGE_CURVE('',#107125,#109048,#109050,.T.); +#109048 = VERTEX_POINT('',#109049); +#109049 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#109050 = LINE('',#109051,#109052); +#109051 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#109052 = VECTOR('',#109053,1.); +#109053 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109054 = ORIENTED_EDGE('',*,*,#109055,.T.); +#109055 = EDGE_CURVE('',#109048,#109056,#109058,.T.); +#109056 = VERTEX_POINT('',#109057); +#109057 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#109058 = LINE('',#109059,#109060); +#109059 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#109060 = VECTOR('',#109061,1.); +#109061 = DIRECTION('',(0.,0.,-1.)); +#109062 = ORIENTED_EDGE('',*,*,#109063,.T.); +#109063 = EDGE_CURVE('',#109056,#109064,#109066,.T.); +#109064 = VERTEX_POINT('',#109065); +#109065 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#109066 = LINE('',#109067,#109068); +#109067 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#109068 = VECTOR('',#109069,1.); +#109069 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109070 = ORIENTED_EDGE('',*,*,#109071,.T.); +#109071 = EDGE_CURVE('',#109064,#109023,#109072,.T.); +#109072 = LINE('',#109073,#109074); +#109073 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#109074 = VECTOR('',#109075,1.); +#109075 = DIRECTION('',(0.,0.,1.)); +#109076 = ORIENTED_EDGE('',*,*,#109030,.T.); +#109077 = ORIENTED_EDGE('',*,*,#107036,.F.); +#109078 = ORIENTED_EDGE('',*,*,#108942,.T.); +#109079 = PLANE('',#109080); +#109080 = AXIS2_PLACEMENT_3D('',#109081,#109082,#109083); +#109081 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#109082 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109083 = DIRECTION('',(0.,0.,1.)); +#109084 = ADVANCED_FACE('',(#109085),#109096,.T.); +#109085 = FACE_BOUND('',#109086,.T.); +#109086 = EDGE_LOOP('',(#109087,#109088,#109089,#109095)); +#109087 = ORIENTED_EDGE('',*,*,#107124,.T.); +#109088 = ORIENTED_EDGE('',*,*,#109047,.T.); +#109089 = ORIENTED_EDGE('',*,*,#109090,.F.); +#109090 = EDGE_CURVE('',#108975,#109048,#109091,.T.); +#109091 = LINE('',#109092,#109093); +#109092 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#109093 = VECTOR('',#109094,1.); +#109094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109095 = ORIENTED_EDGE('',*,*,#108974,.F.); +#109096 = PLANE('',#109097); +#109097 = AXIS2_PLACEMENT_3D('',#109098,#109099,#109100); +#109098 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#109099 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109100 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109101 = ADVANCED_FACE('',(#109102),#109113,.T.); +#109102 = FACE_BOUND('',#109103,.T.); +#109103 = EDGE_LOOP('',(#109104,#109105,#109106,#109107)); +#109104 = ORIENTED_EDGE('',*,*,#107300,.T.); +#109105 = ORIENTED_EDGE('',*,*,#107163,.T.); +#109106 = ORIENTED_EDGE('',*,*,#107188,.T.); +#109107 = ORIENTED_EDGE('',*,*,#109108,.T.); +#109108 = EDGE_CURVE('',#107189,#107293,#109109,.T.); +#109109 = LINE('',#109110,#109111); +#109110 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#109111 = VECTOR('',#109112,1.); +#109112 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109113 = PLANE('',#109114); +#109114 = AXIS2_PLACEMENT_3D('',#109115,#109116,#109117); +#109115 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#109116 = DIRECTION('',(0.,0.,1.)); +#109117 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109118 = ADVANCED_FACE('',(#109119),#109130,.T.); +#109119 = FACE_BOUND('',#109120,.T.); +#109120 = EDGE_LOOP('',(#109121,#109122,#109128,#109129)); +#109121 = ORIENTED_EDGE('',*,*,#107268,.T.); +#109122 = ORIENTED_EDGE('',*,*,#109123,.F.); +#109123 = EDGE_CURVE('',#107213,#107269,#109124,.T.); +#109124 = LINE('',#109125,#109126); +#109125 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#109126 = VECTOR('',#109127,1.); +#109127 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109128 = ORIENTED_EDGE('',*,*,#107220,.T.); +#109129 = ORIENTED_EDGE('',*,*,#107243,.T.); +#109130 = PLANE('',#109131); +#109131 = AXIS2_PLACEMENT_3D('',#109132,#109133,#109134); +#109132 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#109133 = DIRECTION('',(0.,0.,1.)); +#109134 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109135 = ADVANCED_FACE('',(#109136),#109179,.T.); +#109136 = FACE_BOUND('',#109137,.T.); +#109137 = EDGE_LOOP('',(#109138,#109139,#109147,#109155,#109163,#109171, + #109177,#109178)); +#109138 = ORIENTED_EDGE('',*,*,#107276,.F.); +#109139 = ORIENTED_EDGE('',*,*,#109140,.T.); +#109140 = EDGE_CURVE('',#107277,#109141,#109143,.T.); +#109141 = VERTEX_POINT('',#109142); +#109142 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109143 = LINE('',#109144,#109145); +#109144 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#109145 = VECTOR('',#109146,1.); +#109146 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109147 = ORIENTED_EDGE('',*,*,#109148,.T.); +#109148 = EDGE_CURVE('',#109141,#109149,#109151,.T.); +#109149 = VERTEX_POINT('',#109150); +#109150 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109151 = LINE('',#109152,#109153); +#109152 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109153 = VECTOR('',#109154,1.); +#109154 = DIRECTION('',(0.,0.,-1.)); +#109155 = ORIENTED_EDGE('',*,*,#109156,.T.); +#109156 = EDGE_CURVE('',#109149,#109157,#109159,.T.); +#109157 = VERTEX_POINT('',#109158); +#109158 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109159 = LINE('',#109160,#109161); +#109160 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109161 = VECTOR('',#109162,1.); +#109162 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109163 = ORIENTED_EDGE('',*,*,#109164,.T.); +#109164 = EDGE_CURVE('',#109157,#109165,#109167,.T.); +#109165 = VERTEX_POINT('',#109166); +#109166 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109167 = LINE('',#109168,#109169); +#109168 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109169 = VECTOR('',#109170,1.); +#109170 = DIRECTION('',(0.,0.,1.)); +#109171 = ORIENTED_EDGE('',*,*,#109172,.T.); +#109172 = EDGE_CURVE('',#109165,#107205,#109173,.T.); +#109173 = LINE('',#109174,#109175); +#109174 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109175 = VECTOR('',#109176,1.); +#109176 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109177 = ORIENTED_EDGE('',*,*,#107212,.F.); +#109178 = ORIENTED_EDGE('',*,*,#109123,.T.); +#109179 = PLANE('',#109180); +#109180 = AXIS2_PLACEMENT_3D('',#109181,#109182,#109183); +#109181 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#109182 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109183 = DIRECTION('',(0.,0.,1.)); +#109184 = ADVANCED_FACE('',(#109185),#109203,.T.); +#109185 = FACE_BOUND('',#109186,.T.); +#109186 = EDGE_LOOP('',(#109187,#109195,#109201,#109202)); +#109187 = ORIENTED_EDGE('',*,*,#109188,.T.); +#109188 = EDGE_CURVE('',#109165,#109189,#109191,.T.); +#109189 = VERTEX_POINT('',#109190); +#109190 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#109191 = LINE('',#109192,#109193); +#109192 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109193 = VECTOR('',#109194,1.); +#109194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109195 = ORIENTED_EDGE('',*,*,#109196,.T.); +#109196 = EDGE_CURVE('',#109189,#107197,#109197,.T.); +#109197 = LINE('',#109198,#109199); +#109198 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#109199 = VECTOR('',#109200,1.); +#109200 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109201 = ORIENTED_EDGE('',*,*,#107204,.F.); +#109202 = ORIENTED_EDGE('',*,*,#109172,.F.); +#109203 = PLANE('',#109204); +#109204 = AXIS2_PLACEMENT_3D('',#109205,#109206,#109207); +#109205 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#109206 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109207 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109208 = ADVANCED_FACE('',(#109209),#109245,.F.); +#109209 = FACE_BOUND('',#109210,.F.); +#109210 = EDGE_LOOP('',(#109211,#109212,#109220,#109228,#109236,#109242, + #109243,#109244)); +#109211 = ORIENTED_EDGE('',*,*,#107292,.F.); +#109212 = ORIENTED_EDGE('',*,*,#109213,.T.); +#109213 = EDGE_CURVE('',#107285,#109214,#109216,.T.); +#109214 = VERTEX_POINT('',#109215); +#109215 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#109216 = LINE('',#109217,#109218); +#109217 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#109218 = VECTOR('',#109219,1.); +#109219 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109220 = ORIENTED_EDGE('',*,*,#109221,.T.); +#109221 = EDGE_CURVE('',#109214,#109222,#109224,.T.); +#109222 = VERTEX_POINT('',#109223); +#109223 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#109224 = LINE('',#109225,#109226); +#109225 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#109226 = VECTOR('',#109227,1.); +#109227 = DIRECTION('',(0.,0.,-1.)); +#109228 = ORIENTED_EDGE('',*,*,#109229,.T.); +#109229 = EDGE_CURVE('',#109222,#109230,#109232,.T.); +#109230 = VERTEX_POINT('',#109231); +#109231 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#109232 = LINE('',#109233,#109234); +#109233 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#109234 = VECTOR('',#109235,1.); +#109235 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109236 = ORIENTED_EDGE('',*,*,#109237,.T.); +#109237 = EDGE_CURVE('',#109230,#109189,#109238,.T.); +#109238 = LINE('',#109239,#109240); +#109239 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#109240 = VECTOR('',#109241,1.); +#109241 = DIRECTION('',(0.,0.,1.)); +#109242 = ORIENTED_EDGE('',*,*,#109196,.T.); +#109243 = ORIENTED_EDGE('',*,*,#107196,.F.); +#109244 = ORIENTED_EDGE('',*,*,#109108,.T.); +#109245 = PLANE('',#109246); +#109246 = AXIS2_PLACEMENT_3D('',#109247,#109248,#109249); +#109247 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#109248 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109249 = DIRECTION('',(0.,0.,1.)); +#109250 = ADVANCED_FACE('',(#109251),#109262,.T.); +#109251 = FACE_BOUND('',#109252,.T.); +#109252 = EDGE_LOOP('',(#109253,#109254,#109255,#109261)); +#109253 = ORIENTED_EDGE('',*,*,#107284,.T.); +#109254 = ORIENTED_EDGE('',*,*,#109213,.T.); +#109255 = ORIENTED_EDGE('',*,*,#109256,.F.); +#109256 = EDGE_CURVE('',#109141,#109214,#109257,.T.); +#109257 = LINE('',#109258,#109259); +#109258 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109259 = VECTOR('',#109260,1.); +#109260 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109261 = ORIENTED_EDGE('',*,*,#109140,.F.); +#109262 = PLANE('',#109263); +#109263 = AXIS2_PLACEMENT_3D('',#109264,#109265,#109266); +#109264 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#109265 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109266 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109267 = ADVANCED_FACE('',(#109268),#109279,.T.); +#109268 = FACE_BOUND('',#109269,.T.); +#109269 = EDGE_LOOP('',(#109270,#109271,#109272,#109273)); +#109270 = ORIENTED_EDGE('',*,*,#107460,.T.); +#109271 = ORIENTED_EDGE('',*,*,#107323,.T.); +#109272 = ORIENTED_EDGE('',*,*,#107348,.T.); +#109273 = ORIENTED_EDGE('',*,*,#109274,.T.); +#109274 = EDGE_CURVE('',#107349,#107453,#109275,.T.); +#109275 = LINE('',#109276,#109277); +#109276 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#109277 = VECTOR('',#109278,1.); +#109278 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109279 = PLANE('',#109280); +#109280 = AXIS2_PLACEMENT_3D('',#109281,#109282,#109283); +#109281 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#109282 = DIRECTION('',(0.,0.,1.)); +#109283 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109284 = ADVANCED_FACE('',(#109285),#109296,.T.); +#109285 = FACE_BOUND('',#109286,.T.); +#109286 = EDGE_LOOP('',(#109287,#109288,#109294,#109295)); +#109287 = ORIENTED_EDGE('',*,*,#107428,.T.); +#109288 = ORIENTED_EDGE('',*,*,#109289,.F.); +#109289 = EDGE_CURVE('',#107373,#107429,#109290,.T.); +#109290 = LINE('',#109291,#109292); +#109291 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#109292 = VECTOR('',#109293,1.); +#109293 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109294 = ORIENTED_EDGE('',*,*,#107380,.T.); +#109295 = ORIENTED_EDGE('',*,*,#107403,.T.); +#109296 = PLANE('',#109297); +#109297 = AXIS2_PLACEMENT_3D('',#109298,#109299,#109300); +#109298 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#109299 = DIRECTION('',(0.,0.,1.)); +#109300 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109301 = ADVANCED_FACE('',(#109302),#109345,.T.); +#109302 = FACE_BOUND('',#109303,.T.); +#109303 = EDGE_LOOP('',(#109304,#109305,#109313,#109321,#109329,#109337, + #109343,#109344)); +#109304 = ORIENTED_EDGE('',*,*,#107436,.F.); +#109305 = ORIENTED_EDGE('',*,*,#109306,.T.); +#109306 = EDGE_CURVE('',#107437,#109307,#109309,.T.); +#109307 = VERTEX_POINT('',#109308); +#109308 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109309 = LINE('',#109310,#109311); +#109310 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#109311 = VECTOR('',#109312,1.); +#109312 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109313 = ORIENTED_EDGE('',*,*,#109314,.T.); +#109314 = EDGE_CURVE('',#109307,#109315,#109317,.T.); +#109315 = VERTEX_POINT('',#109316); +#109316 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109317 = LINE('',#109318,#109319); +#109318 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109319 = VECTOR('',#109320,1.); +#109320 = DIRECTION('',(0.,0.,-1.)); +#109321 = ORIENTED_EDGE('',*,*,#109322,.T.); +#109322 = EDGE_CURVE('',#109315,#109323,#109325,.T.); +#109323 = VERTEX_POINT('',#109324); +#109324 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109325 = LINE('',#109326,#109327); +#109326 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109327 = VECTOR('',#109328,1.); +#109328 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109329 = ORIENTED_EDGE('',*,*,#109330,.T.); +#109330 = EDGE_CURVE('',#109323,#109331,#109333,.T.); +#109331 = VERTEX_POINT('',#109332); +#109332 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109333 = LINE('',#109334,#109335); +#109334 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109335 = VECTOR('',#109336,1.); +#109336 = DIRECTION('',(0.,0.,1.)); +#109337 = ORIENTED_EDGE('',*,*,#109338,.T.); +#109338 = EDGE_CURVE('',#109331,#107365,#109339,.T.); +#109339 = LINE('',#109340,#109341); +#109340 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109341 = VECTOR('',#109342,1.); +#109342 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109343 = ORIENTED_EDGE('',*,*,#107372,.F.); +#109344 = ORIENTED_EDGE('',*,*,#109289,.T.); +#109345 = PLANE('',#109346); +#109346 = AXIS2_PLACEMENT_3D('',#109347,#109348,#109349); +#109347 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#109348 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109349 = DIRECTION('',(0.,0.,1.)); +#109350 = ADVANCED_FACE('',(#109351),#109369,.T.); +#109351 = FACE_BOUND('',#109352,.T.); +#109352 = EDGE_LOOP('',(#109353,#109361,#109367,#109368)); +#109353 = ORIENTED_EDGE('',*,*,#109354,.T.); +#109354 = EDGE_CURVE('',#109331,#109355,#109357,.T.); +#109355 = VERTEX_POINT('',#109356); +#109356 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#109357 = LINE('',#109358,#109359); +#109358 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109359 = VECTOR('',#109360,1.); +#109360 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109361 = ORIENTED_EDGE('',*,*,#109362,.T.); +#109362 = EDGE_CURVE('',#109355,#107357,#109363,.T.); +#109363 = LINE('',#109364,#109365); +#109364 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#109365 = VECTOR('',#109366,1.); +#109366 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109367 = ORIENTED_EDGE('',*,*,#107364,.F.); +#109368 = ORIENTED_EDGE('',*,*,#109338,.F.); +#109369 = PLANE('',#109370); +#109370 = AXIS2_PLACEMENT_3D('',#109371,#109372,#109373); +#109371 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#109372 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109373 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109374 = ADVANCED_FACE('',(#109375),#109411,.F.); +#109375 = FACE_BOUND('',#109376,.F.); +#109376 = EDGE_LOOP('',(#109377,#109378,#109386,#109394,#109402,#109408, + #109409,#109410)); +#109377 = ORIENTED_EDGE('',*,*,#107452,.F.); +#109378 = ORIENTED_EDGE('',*,*,#109379,.T.); +#109379 = EDGE_CURVE('',#107445,#109380,#109382,.T.); +#109380 = VERTEX_POINT('',#109381); +#109381 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#109382 = LINE('',#109383,#109384); +#109383 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#109384 = VECTOR('',#109385,1.); +#109385 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109386 = ORIENTED_EDGE('',*,*,#109387,.T.); +#109387 = EDGE_CURVE('',#109380,#109388,#109390,.T.); +#109388 = VERTEX_POINT('',#109389); +#109389 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#109390 = LINE('',#109391,#109392); +#109391 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#109392 = VECTOR('',#109393,1.); +#109393 = DIRECTION('',(0.,0.,-1.)); +#109394 = ORIENTED_EDGE('',*,*,#109395,.T.); +#109395 = EDGE_CURVE('',#109388,#109396,#109398,.T.); +#109396 = VERTEX_POINT('',#109397); +#109397 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#109398 = LINE('',#109399,#109400); +#109399 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#109400 = VECTOR('',#109401,1.); +#109401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109402 = ORIENTED_EDGE('',*,*,#109403,.T.); +#109403 = EDGE_CURVE('',#109396,#109355,#109404,.T.); +#109404 = LINE('',#109405,#109406); +#109405 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#109406 = VECTOR('',#109407,1.); +#109407 = DIRECTION('',(0.,0.,1.)); +#109408 = ORIENTED_EDGE('',*,*,#109362,.T.); +#109409 = ORIENTED_EDGE('',*,*,#107356,.F.); +#109410 = ORIENTED_EDGE('',*,*,#109274,.T.); +#109411 = PLANE('',#109412); +#109412 = AXIS2_PLACEMENT_3D('',#109413,#109414,#109415); +#109413 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#109414 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109415 = DIRECTION('',(0.,0.,1.)); +#109416 = ADVANCED_FACE('',(#109417),#109428,.T.); +#109417 = FACE_BOUND('',#109418,.T.); +#109418 = EDGE_LOOP('',(#109419,#109420,#109421,#109427)); +#109419 = ORIENTED_EDGE('',*,*,#107444,.T.); +#109420 = ORIENTED_EDGE('',*,*,#109379,.T.); +#109421 = ORIENTED_EDGE('',*,*,#109422,.F.); +#109422 = EDGE_CURVE('',#109307,#109380,#109423,.T.); +#109423 = LINE('',#109424,#109425); +#109424 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109425 = VECTOR('',#109426,1.); +#109426 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109427 = ORIENTED_EDGE('',*,*,#109306,.F.); +#109428 = PLANE('',#109429); +#109429 = AXIS2_PLACEMENT_3D('',#109430,#109431,#109432); +#109430 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#109431 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109432 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109433 = ADVANCED_FACE('',(#109434),#109445,.T.); +#109434 = FACE_BOUND('',#109435,.T.); +#109435 = EDGE_LOOP('',(#109436,#109437,#109438,#109439)); +#109436 = ORIENTED_EDGE('',*,*,#107620,.T.); +#109437 = ORIENTED_EDGE('',*,*,#107483,.T.); +#109438 = ORIENTED_EDGE('',*,*,#107508,.T.); +#109439 = ORIENTED_EDGE('',*,*,#109440,.T.); +#109440 = EDGE_CURVE('',#107509,#107613,#109441,.T.); +#109441 = LINE('',#109442,#109443); +#109442 = CARTESIAN_POINT('',(0.1,8.770761894539E-16,0.9)); +#109443 = VECTOR('',#109444,1.); +#109444 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109445 = PLANE('',#109446); +#109446 = AXIS2_PLACEMENT_3D('',#109447,#109448,#109449); +#109447 = CARTESIAN_POINT('',(-9.367506770275E-17,1.7763568394E-15,0.9) + ); +#109448 = DIRECTION('',(0.,0.,1.)); +#109449 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109450 = ADVANCED_FACE('',(#109451),#109462,.T.); +#109451 = FACE_BOUND('',#109452,.T.); +#109452 = EDGE_LOOP('',(#109453,#109454,#109460,#109461)); +#109453 = ORIENTED_EDGE('',*,*,#107588,.T.); +#109454 = ORIENTED_EDGE('',*,*,#109455,.F.); +#109455 = EDGE_CURVE('',#107533,#107589,#109456,.T.); +#109456 = LINE('',#109457,#109458); +#109457 = CARTESIAN_POINT('',(-0.1,8.992806499464E-16,0.9)); +#109458 = VECTOR('',#109459,1.); +#109459 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109460 = ORIENTED_EDGE('',*,*,#107540,.T.); +#109461 = ORIENTED_EDGE('',*,*,#107563,.T.); +#109462 = PLANE('',#109463); +#109463 = AXIS2_PLACEMENT_3D('',#109464,#109465,#109466); +#109464 = CARTESIAN_POINT('',(-9.367506770275E-17,1.7763568394E-15,0.9) + ); +#109465 = DIRECTION('',(0.,0.,1.)); +#109466 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109467 = ADVANCED_FACE('',(#109468),#109511,.T.); +#109468 = FACE_BOUND('',#109469,.T.); +#109469 = EDGE_LOOP('',(#109470,#109471,#109479,#109487,#109495,#109503, + #109509,#109510)); +#109470 = ORIENTED_EDGE('',*,*,#107596,.F.); +#109471 = ORIENTED_EDGE('',*,*,#109472,.T.); +#109472 = EDGE_CURVE('',#107597,#109473,#109475,.T.); +#109473 = VERTEX_POINT('',#109474); +#109474 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109475 = LINE('',#109476,#109477); +#109476 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#109477 = VECTOR('',#109478,1.); +#109478 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109479 = ORIENTED_EDGE('',*,*,#109480,.T.); +#109480 = EDGE_CURVE('',#109473,#109481,#109483,.T.); +#109481 = VERTEX_POINT('',#109482); +#109482 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109483 = LINE('',#109484,#109485); +#109484 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109485 = VECTOR('',#109486,1.); +#109486 = DIRECTION('',(0.,0.,-1.)); +#109487 = ORIENTED_EDGE('',*,*,#109488,.T.); +#109488 = EDGE_CURVE('',#109481,#109489,#109491,.T.); +#109489 = VERTEX_POINT('',#109490); +#109490 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109491 = LINE('',#109492,#109493); +#109492 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109493 = VECTOR('',#109494,1.); +#109494 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109495 = ORIENTED_EDGE('',*,*,#109496,.T.); +#109496 = EDGE_CURVE('',#109489,#109497,#109499,.T.); +#109497 = VERTEX_POINT('',#109498); +#109498 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109499 = LINE('',#109500,#109501); +#109500 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109501 = VECTOR('',#109502,1.); +#109502 = DIRECTION('',(0.,0.,1.)); +#109503 = ORIENTED_EDGE('',*,*,#109504,.T.); +#109504 = EDGE_CURVE('',#109497,#107525,#109505,.T.); +#109505 = LINE('',#109506,#109507); +#109506 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109507 = VECTOR('',#109508,1.); +#109508 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109509 = ORIENTED_EDGE('',*,*,#107532,.F.); +#109510 = ORIENTED_EDGE('',*,*,#109455,.T.); +#109511 = PLANE('',#109512); +#109512 = AXIS2_PLACEMENT_3D('',#109513,#109514,#109515); +#109513 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#109514 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109515 = DIRECTION('',(0.,0.,1.)); +#109516 = ADVANCED_FACE('',(#109517),#109535,.T.); +#109517 = FACE_BOUND('',#109518,.T.); +#109518 = EDGE_LOOP('',(#109519,#109527,#109533,#109534)); +#109519 = ORIENTED_EDGE('',*,*,#109520,.T.); +#109520 = EDGE_CURVE('',#109497,#109521,#109523,.T.); +#109521 = VERTEX_POINT('',#109522); +#109522 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#109523 = LINE('',#109524,#109525); +#109524 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109525 = VECTOR('',#109526,1.); +#109526 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109527 = ORIENTED_EDGE('',*,*,#109528,.T.); +#109528 = EDGE_CURVE('',#109521,#107517,#109529,.T.); +#109529 = LINE('',#109530,#109531); +#109530 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#109531 = VECTOR('',#109532,1.); +#109532 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109533 = ORIENTED_EDGE('',*,*,#107524,.F.); +#109534 = ORIENTED_EDGE('',*,*,#109504,.F.); +#109535 = PLANE('',#109536); +#109536 = AXIS2_PLACEMENT_3D('',#109537,#109538,#109539); +#109537 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#109538 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#109539 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109540 = ADVANCED_FACE('',(#109541),#109577,.F.); +#109541 = FACE_BOUND('',#109542,.F.); +#109542 = EDGE_LOOP('',(#109543,#109544,#109552,#109560,#109568,#109574, + #109575,#109576)); +#109543 = ORIENTED_EDGE('',*,*,#107612,.F.); +#109544 = ORIENTED_EDGE('',*,*,#109545,.T.); +#109545 = EDGE_CURVE('',#107605,#109546,#109548,.T.); +#109546 = VERTEX_POINT('',#109547); +#109547 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#109548 = LINE('',#109549,#109550); +#109549 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#109550 = VECTOR('',#109551,1.); +#109551 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109552 = ORIENTED_EDGE('',*,*,#109553,.T.); +#109553 = EDGE_CURVE('',#109546,#109554,#109556,.T.); +#109554 = VERTEX_POINT('',#109555); +#109555 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#109556 = LINE('',#109557,#109558); +#109557 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#109558 = VECTOR('',#109559,1.); +#109559 = DIRECTION('',(0.,0.,-1.)); +#109560 = ORIENTED_EDGE('',*,*,#109561,.T.); +#109561 = EDGE_CURVE('',#109554,#109562,#109564,.T.); +#109562 = VERTEX_POINT('',#109563); +#109563 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#109564 = LINE('',#109565,#109566); +#109565 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#109566 = VECTOR('',#109567,1.); +#109567 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109568 = ORIENTED_EDGE('',*,*,#109569,.T.); +#109569 = EDGE_CURVE('',#109562,#109521,#109570,.T.); +#109570 = LINE('',#109571,#109572); +#109571 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#109572 = VECTOR('',#109573,1.); +#109573 = DIRECTION('',(0.,0.,1.)); +#109574 = ORIENTED_EDGE('',*,*,#109528,.T.); +#109575 = ORIENTED_EDGE('',*,*,#107516,.F.); +#109576 = ORIENTED_EDGE('',*,*,#109440,.T.); +#109577 = PLANE('',#109578); +#109578 = AXIS2_PLACEMENT_3D('',#109579,#109580,#109581); +#109579 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#109580 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#109581 = DIRECTION('',(0.,0.,1.)); +#109582 = ADVANCED_FACE('',(#109583),#109594,.T.); +#109583 = FACE_BOUND('',#109584,.T.); +#109584 = EDGE_LOOP('',(#109585,#109586,#109587,#109593)); +#109585 = ORIENTED_EDGE('',*,*,#107604,.T.); +#109586 = ORIENTED_EDGE('',*,*,#109545,.T.); +#109587 = ORIENTED_EDGE('',*,*,#109588,.F.); +#109588 = EDGE_CURVE('',#109473,#109546,#109589,.T.); +#109589 = LINE('',#109590,#109591); +#109590 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109591 = VECTOR('',#109592,1.); +#109592 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109593 = ORIENTED_EDGE('',*,*,#109472,.F.); +#109594 = PLANE('',#109595); +#109595 = AXIS2_PLACEMENT_3D('',#109596,#109597,#109598); +#109596 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#109597 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#109598 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#109599 = ADVANCED_FACE('',(#109600),#109611,.T.); +#109600 = FACE_BOUND('',#109601,.T.); +#109601 = EDGE_LOOP('',(#109602,#109608,#109609,#109610)); +#109602 = ORIENTED_EDGE('',*,*,#109603,.T.); +#109603 = EDGE_CURVE('',#108327,#108400,#109604,.T.); +#109604 = LINE('',#109605,#109606); +#109605 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#109606 = VECTOR('',#109607,1.); +#109607 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109608 = ORIENTED_EDGE('',*,*,#108407,.T.); +#109609 = ORIENTED_EDGE('',*,*,#108358,.F.); +#109610 = ORIENTED_EDGE('',*,*,#108334,.F.); +#109611 = PLANE('',#109612); +#109612 = AXIS2_PLACEMENT_3D('',#109613,#109614,#109615); +#109613 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#109614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109615 = DIRECTION('',(0.,0.,1.)); +#109616 = ADVANCED_FACE('',(#109617),#109628,.T.); +#109617 = FACE_BOUND('',#109618,.T.); +#109618 = EDGE_LOOP('',(#109619,#109625,#109626,#109627)); +#109619 = ORIENTED_EDGE('',*,*,#109620,.T.); +#109620 = EDGE_CURVE('',#108319,#108392,#109621,.T.); +#109621 = LINE('',#109622,#109623); +#109622 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#109623 = VECTOR('',#109624,1.); +#109624 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109625 = ORIENTED_EDGE('',*,*,#108399,.T.); +#109626 = ORIENTED_EDGE('',*,*,#109603,.F.); +#109627 = ORIENTED_EDGE('',*,*,#108326,.F.); +#109628 = PLANE('',#109629); +#109629 = AXIS2_PLACEMENT_3D('',#109630,#109631,#109632); +#109630 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#109631 = DIRECTION('',(0.,0.,1.)); +#109632 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109633 = ADVANCED_FACE('',(#109634),#109640,.T.); +#109634 = FACE_BOUND('',#109635,.T.); +#109635 = EDGE_LOOP('',(#109636,#109637,#109638,#109639)); +#109636 = ORIENTED_EDGE('',*,*,#108426,.T.); +#109637 = ORIENTED_EDGE('',*,*,#108391,.T.); +#109638 = ORIENTED_EDGE('',*,*,#109620,.F.); +#109639 = ORIENTED_EDGE('',*,*,#108318,.F.); +#109640 = PLANE('',#109641); +#109641 = AXIS2_PLACEMENT_3D('',#109642,#109643,#109644); +#109642 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#109643 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109644 = DIRECTION('',(0.,0.,-1.)); +#109645 = ADVANCED_FACE('',(#109646),#109657,.T.); +#109646 = FACE_BOUND('',#109647,.T.); +#109647 = EDGE_LOOP('',(#109648,#109654,#109655,#109656)); +#109648 = ORIENTED_EDGE('',*,*,#109649,.T.); +#109649 = EDGE_CURVE('',#108493,#108566,#109650,.T.); +#109650 = LINE('',#109651,#109652); +#109651 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#109652 = VECTOR('',#109653,1.); +#109653 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109654 = ORIENTED_EDGE('',*,*,#108573,.T.); +#109655 = ORIENTED_EDGE('',*,*,#108524,.F.); +#109656 = ORIENTED_EDGE('',*,*,#108500,.F.); +#109657 = PLANE('',#109658); +#109658 = AXIS2_PLACEMENT_3D('',#109659,#109660,#109661); +#109659 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#109660 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109661 = DIRECTION('',(0.,0.,1.)); +#109662 = ADVANCED_FACE('',(#109663),#109674,.T.); +#109663 = FACE_BOUND('',#109664,.T.); +#109664 = EDGE_LOOP('',(#109665,#109671,#109672,#109673)); +#109665 = ORIENTED_EDGE('',*,*,#109666,.T.); +#109666 = EDGE_CURVE('',#108485,#108558,#109667,.T.); +#109667 = LINE('',#109668,#109669); +#109668 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#109669 = VECTOR('',#109670,1.); +#109670 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109671 = ORIENTED_EDGE('',*,*,#108565,.T.); +#109672 = ORIENTED_EDGE('',*,*,#109649,.F.); +#109673 = ORIENTED_EDGE('',*,*,#108492,.F.); +#109674 = PLANE('',#109675); +#109675 = AXIS2_PLACEMENT_3D('',#109676,#109677,#109678); +#109676 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#109677 = DIRECTION('',(0.,0.,1.)); +#109678 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109679 = ADVANCED_FACE('',(#109680),#109686,.T.); +#109680 = FACE_BOUND('',#109681,.T.); +#109681 = EDGE_LOOP('',(#109682,#109683,#109684,#109685)); +#109682 = ORIENTED_EDGE('',*,*,#108592,.T.); +#109683 = ORIENTED_EDGE('',*,*,#108557,.T.); +#109684 = ORIENTED_EDGE('',*,*,#109666,.F.); +#109685 = ORIENTED_EDGE('',*,*,#108484,.F.); +#109686 = PLANE('',#109687); +#109687 = AXIS2_PLACEMENT_3D('',#109688,#109689,#109690); +#109688 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#109689 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109690 = DIRECTION('',(0.,0.,-1.)); +#109691 = ADVANCED_FACE('',(#109692),#109703,.T.); +#109692 = FACE_BOUND('',#109693,.T.); +#109693 = EDGE_LOOP('',(#109694,#109700,#109701,#109702)); +#109694 = ORIENTED_EDGE('',*,*,#109695,.T.); +#109695 = EDGE_CURVE('',#108659,#108732,#109696,.T.); +#109696 = LINE('',#109697,#109698); +#109697 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#109698 = VECTOR('',#109699,1.); +#109699 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109700 = ORIENTED_EDGE('',*,*,#108739,.T.); +#109701 = ORIENTED_EDGE('',*,*,#108690,.F.); +#109702 = ORIENTED_EDGE('',*,*,#108666,.F.); +#109703 = PLANE('',#109704); +#109704 = AXIS2_PLACEMENT_3D('',#109705,#109706,#109707); +#109705 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#109706 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109707 = DIRECTION('',(0.,0.,1.)); +#109708 = ADVANCED_FACE('',(#109709),#109720,.T.); +#109709 = FACE_BOUND('',#109710,.T.); +#109710 = EDGE_LOOP('',(#109711,#109717,#109718,#109719)); +#109711 = ORIENTED_EDGE('',*,*,#109712,.T.); +#109712 = EDGE_CURVE('',#108651,#108724,#109713,.T.); +#109713 = LINE('',#109714,#109715); +#109714 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#109715 = VECTOR('',#109716,1.); +#109716 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109717 = ORIENTED_EDGE('',*,*,#108731,.T.); +#109718 = ORIENTED_EDGE('',*,*,#109695,.F.); +#109719 = ORIENTED_EDGE('',*,*,#108658,.F.); +#109720 = PLANE('',#109721); +#109721 = AXIS2_PLACEMENT_3D('',#109722,#109723,#109724); +#109722 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#109723 = DIRECTION('',(0.,0.,1.)); +#109724 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109725 = ADVANCED_FACE('',(#109726),#109732,.T.); +#109726 = FACE_BOUND('',#109727,.T.); +#109727 = EDGE_LOOP('',(#109728,#109729,#109730,#109731)); +#109728 = ORIENTED_EDGE('',*,*,#108758,.T.); +#109729 = ORIENTED_EDGE('',*,*,#108723,.T.); +#109730 = ORIENTED_EDGE('',*,*,#109712,.F.); +#109731 = ORIENTED_EDGE('',*,*,#108650,.F.); +#109732 = PLANE('',#109733); +#109733 = AXIS2_PLACEMENT_3D('',#109734,#109735,#109736); +#109734 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#109735 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109736 = DIRECTION('',(0.,0.,-1.)); +#109737 = ADVANCED_FACE('',(#109738),#109749,.T.); +#109738 = FACE_BOUND('',#109739,.T.); +#109739 = EDGE_LOOP('',(#109740,#109746,#109747,#109748)); +#109740 = ORIENTED_EDGE('',*,*,#109741,.T.); +#109741 = EDGE_CURVE('',#108825,#108898,#109742,.T.); +#109742 = LINE('',#109743,#109744); +#109743 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#109744 = VECTOR('',#109745,1.); +#109745 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109746 = ORIENTED_EDGE('',*,*,#108905,.T.); +#109747 = ORIENTED_EDGE('',*,*,#108856,.F.); +#109748 = ORIENTED_EDGE('',*,*,#108832,.F.); +#109749 = PLANE('',#109750); +#109750 = AXIS2_PLACEMENT_3D('',#109751,#109752,#109753); +#109751 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#109752 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109753 = DIRECTION('',(0.,0.,1.)); +#109754 = ADVANCED_FACE('',(#109755),#109766,.T.); +#109755 = FACE_BOUND('',#109756,.T.); +#109756 = EDGE_LOOP('',(#109757,#109763,#109764,#109765)); +#109757 = ORIENTED_EDGE('',*,*,#109758,.T.); +#109758 = EDGE_CURVE('',#108817,#108890,#109759,.T.); +#109759 = LINE('',#109760,#109761); +#109760 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#109761 = VECTOR('',#109762,1.); +#109762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109763 = ORIENTED_EDGE('',*,*,#108897,.T.); +#109764 = ORIENTED_EDGE('',*,*,#109741,.F.); +#109765 = ORIENTED_EDGE('',*,*,#108824,.F.); +#109766 = PLANE('',#109767); +#109767 = AXIS2_PLACEMENT_3D('',#109768,#109769,#109770); +#109768 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#109769 = DIRECTION('',(0.,0.,1.)); +#109770 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109771 = ADVANCED_FACE('',(#109772),#109778,.T.); +#109772 = FACE_BOUND('',#109773,.T.); +#109773 = EDGE_LOOP('',(#109774,#109775,#109776,#109777)); +#109774 = ORIENTED_EDGE('',*,*,#108924,.T.); +#109775 = ORIENTED_EDGE('',*,*,#108889,.T.); +#109776 = ORIENTED_EDGE('',*,*,#109758,.F.); +#109777 = ORIENTED_EDGE('',*,*,#108816,.F.); +#109778 = PLANE('',#109779); +#109779 = AXIS2_PLACEMENT_3D('',#109780,#109781,#109782); +#109780 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#109781 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109782 = DIRECTION('',(0.,0.,-1.)); +#109783 = ADVANCED_FACE('',(#109784),#109795,.T.); +#109784 = FACE_BOUND('',#109785,.T.); +#109785 = EDGE_LOOP('',(#109786,#109792,#109793,#109794)); +#109786 = ORIENTED_EDGE('',*,*,#109787,.T.); +#109787 = EDGE_CURVE('',#108991,#109064,#109788,.T.); +#109788 = LINE('',#109789,#109790); +#109789 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#109790 = VECTOR('',#109791,1.); +#109791 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109792 = ORIENTED_EDGE('',*,*,#109071,.T.); +#109793 = ORIENTED_EDGE('',*,*,#109022,.F.); +#109794 = ORIENTED_EDGE('',*,*,#108998,.F.); +#109795 = PLANE('',#109796); +#109796 = AXIS2_PLACEMENT_3D('',#109797,#109798,#109799); +#109797 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#109798 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109799 = DIRECTION('',(0.,0.,1.)); +#109800 = ADVANCED_FACE('',(#109801),#109812,.T.); +#109801 = FACE_BOUND('',#109802,.T.); +#109802 = EDGE_LOOP('',(#109803,#109809,#109810,#109811)); +#109803 = ORIENTED_EDGE('',*,*,#109804,.T.); +#109804 = EDGE_CURVE('',#108983,#109056,#109805,.T.); +#109805 = LINE('',#109806,#109807); +#109806 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#109807 = VECTOR('',#109808,1.); +#109808 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109809 = ORIENTED_EDGE('',*,*,#109063,.T.); +#109810 = ORIENTED_EDGE('',*,*,#109787,.F.); +#109811 = ORIENTED_EDGE('',*,*,#108990,.F.); +#109812 = PLANE('',#109813); +#109813 = AXIS2_PLACEMENT_3D('',#109814,#109815,#109816); +#109814 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#109815 = DIRECTION('',(0.,0.,1.)); +#109816 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109817 = ADVANCED_FACE('',(#109818),#109824,.T.); +#109818 = FACE_BOUND('',#109819,.T.); +#109819 = EDGE_LOOP('',(#109820,#109821,#109822,#109823)); +#109820 = ORIENTED_EDGE('',*,*,#109090,.T.); +#109821 = ORIENTED_EDGE('',*,*,#109055,.T.); +#109822 = ORIENTED_EDGE('',*,*,#109804,.F.); +#109823 = ORIENTED_EDGE('',*,*,#108982,.F.); +#109824 = PLANE('',#109825); +#109825 = AXIS2_PLACEMENT_3D('',#109826,#109827,#109828); +#109826 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#109827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109828 = DIRECTION('',(0.,0.,-1.)); +#109829 = ADVANCED_FACE('',(#109830),#109841,.T.); +#109830 = FACE_BOUND('',#109831,.T.); +#109831 = EDGE_LOOP('',(#109832,#109838,#109839,#109840)); +#109832 = ORIENTED_EDGE('',*,*,#109833,.T.); +#109833 = EDGE_CURVE('',#109157,#109230,#109834,.T.); +#109834 = LINE('',#109835,#109836); +#109835 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109836 = VECTOR('',#109837,1.); +#109837 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109838 = ORIENTED_EDGE('',*,*,#109237,.T.); +#109839 = ORIENTED_EDGE('',*,*,#109188,.F.); +#109840 = ORIENTED_EDGE('',*,*,#109164,.F.); +#109841 = PLANE('',#109842); +#109842 = AXIS2_PLACEMENT_3D('',#109843,#109844,#109845); +#109843 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#109844 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109845 = DIRECTION('',(0.,0.,1.)); +#109846 = ADVANCED_FACE('',(#109847),#109858,.T.); +#109847 = FACE_BOUND('',#109848,.T.); +#109848 = EDGE_LOOP('',(#109849,#109855,#109856,#109857)); +#109849 = ORIENTED_EDGE('',*,*,#109850,.T.); +#109850 = EDGE_CURVE('',#109149,#109222,#109851,.T.); +#109851 = LINE('',#109852,#109853); +#109852 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109853 = VECTOR('',#109854,1.); +#109854 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109855 = ORIENTED_EDGE('',*,*,#109229,.T.); +#109856 = ORIENTED_EDGE('',*,*,#109833,.F.); +#109857 = ORIENTED_EDGE('',*,*,#109156,.F.); +#109858 = PLANE('',#109859); +#109859 = AXIS2_PLACEMENT_3D('',#109860,#109861,#109862); +#109860 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#109861 = DIRECTION('',(0.,0.,1.)); +#109862 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109863 = ADVANCED_FACE('',(#109864),#109870,.T.); +#109864 = FACE_BOUND('',#109865,.T.); +#109865 = EDGE_LOOP('',(#109866,#109867,#109868,#109869)); +#109866 = ORIENTED_EDGE('',*,*,#109256,.T.); +#109867 = ORIENTED_EDGE('',*,*,#109221,.T.); +#109868 = ORIENTED_EDGE('',*,*,#109850,.F.); +#109869 = ORIENTED_EDGE('',*,*,#109148,.F.); +#109870 = PLANE('',#109871); +#109871 = AXIS2_PLACEMENT_3D('',#109872,#109873,#109874); +#109872 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#109873 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109874 = DIRECTION('',(0.,0.,-1.)); +#109875 = ADVANCED_FACE('',(#109876),#109887,.T.); +#109876 = FACE_BOUND('',#109877,.T.); +#109877 = EDGE_LOOP('',(#109878,#109884,#109885,#109886)); +#109878 = ORIENTED_EDGE('',*,*,#109879,.T.); +#109879 = EDGE_CURVE('',#109323,#109396,#109880,.T.); +#109880 = LINE('',#109881,#109882); +#109881 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109882 = VECTOR('',#109883,1.); +#109883 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109884 = ORIENTED_EDGE('',*,*,#109403,.T.); +#109885 = ORIENTED_EDGE('',*,*,#109354,.F.); +#109886 = ORIENTED_EDGE('',*,*,#109330,.F.); +#109887 = PLANE('',#109888); +#109888 = AXIS2_PLACEMENT_3D('',#109889,#109890,#109891); +#109889 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#109890 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109891 = DIRECTION('',(0.,0.,1.)); +#109892 = ADVANCED_FACE('',(#109893),#109904,.T.); +#109893 = FACE_BOUND('',#109894,.T.); +#109894 = EDGE_LOOP('',(#109895,#109901,#109902,#109903)); +#109895 = ORIENTED_EDGE('',*,*,#109896,.T.); +#109896 = EDGE_CURVE('',#109315,#109388,#109897,.T.); +#109897 = LINE('',#109898,#109899); +#109898 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109899 = VECTOR('',#109900,1.); +#109900 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109901 = ORIENTED_EDGE('',*,*,#109395,.T.); +#109902 = ORIENTED_EDGE('',*,*,#109879,.F.); +#109903 = ORIENTED_EDGE('',*,*,#109322,.F.); +#109904 = PLANE('',#109905); +#109905 = AXIS2_PLACEMENT_3D('',#109906,#109907,#109908); +#109906 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#109907 = DIRECTION('',(0.,0.,1.)); +#109908 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109909 = ADVANCED_FACE('',(#109910),#109916,.T.); +#109910 = FACE_BOUND('',#109911,.T.); +#109911 = EDGE_LOOP('',(#109912,#109913,#109914,#109915)); +#109912 = ORIENTED_EDGE('',*,*,#109422,.T.); +#109913 = ORIENTED_EDGE('',*,*,#109387,.T.); +#109914 = ORIENTED_EDGE('',*,*,#109896,.F.); +#109915 = ORIENTED_EDGE('',*,*,#109314,.F.); +#109916 = PLANE('',#109917); +#109917 = AXIS2_PLACEMENT_3D('',#109918,#109919,#109920); +#109918 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#109919 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109920 = DIRECTION('',(0.,0.,-1.)); +#109921 = ADVANCED_FACE('',(#109922),#109933,.T.); +#109922 = FACE_BOUND('',#109923,.T.); +#109923 = EDGE_LOOP('',(#109924,#109930,#109931,#109932)); +#109924 = ORIENTED_EDGE('',*,*,#109925,.T.); +#109925 = EDGE_CURVE('',#109489,#109562,#109926,.T.); +#109926 = LINE('',#109927,#109928); +#109927 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109928 = VECTOR('',#109929,1.); +#109929 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109930 = ORIENTED_EDGE('',*,*,#109569,.T.); +#109931 = ORIENTED_EDGE('',*,*,#109520,.F.); +#109932 = ORIENTED_EDGE('',*,*,#109496,.F.); +#109933 = PLANE('',#109934); +#109934 = AXIS2_PLACEMENT_3D('',#109935,#109936,#109937); +#109935 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#109936 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#109937 = DIRECTION('',(0.,0.,1.)); +#109938 = ADVANCED_FACE('',(#109939),#109950,.T.); +#109939 = FACE_BOUND('',#109940,.T.); +#109940 = EDGE_LOOP('',(#109941,#109947,#109948,#109949)); +#109941 = ORIENTED_EDGE('',*,*,#109942,.T.); +#109942 = EDGE_CURVE('',#109481,#109554,#109943,.T.); +#109943 = LINE('',#109944,#109945); +#109944 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109945 = VECTOR('',#109946,1.); +#109946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#109947 = ORIENTED_EDGE('',*,*,#109561,.T.); +#109948 = ORIENTED_EDGE('',*,*,#109925,.F.); +#109949 = ORIENTED_EDGE('',*,*,#109488,.F.); +#109950 = PLANE('',#109951); +#109951 = AXIS2_PLACEMENT_3D('',#109952,#109953,#109954); +#109952 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#109953 = DIRECTION('',(0.,0.,1.)); +#109954 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#109955 = ADVANCED_FACE('',(#109956),#109962,.T.); +#109956 = FACE_BOUND('',#109957,.T.); +#109957 = EDGE_LOOP('',(#109958,#109959,#109960,#109961)); +#109958 = ORIENTED_EDGE('',*,*,#109588,.T.); +#109959 = ORIENTED_EDGE('',*,*,#109553,.T.); +#109960 = ORIENTED_EDGE('',*,*,#109942,.F.); +#109961 = ORIENTED_EDGE('',*,*,#109480,.F.); +#109962 = PLANE('',#109963); +#109963 = AXIS2_PLACEMENT_3D('',#109964,#109965,#109966); +#109964 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#109965 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#109966 = DIRECTION('',(0.,0.,-1.)); +#109967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#109971)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#109968,#109969,#109970)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#109968 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#109969 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#109970 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#109971 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#109968, + 'distance_accuracy_value','confusion accuracy'); +#109972 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#109973,#109975); +#109973 = ( REPRESENTATION_RELATIONSHIP('','',#103476,#103453) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#109974) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#109974 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103454); +#109975 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #109976); +#109976 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('151','=>[0:1:1:64]','',#103448 + ,#103471,$); +#109977 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#103473)); +#109978 = SHAPE_DEFINITION_REPRESENTATION(#109979,#109985); +#109979 = PRODUCT_DEFINITION_SHAPE('','',#109980); +#109980 = PRODUCT_DEFINITION('design','',#109981,#109984); +#109981 = PRODUCT_DEFINITION_FORMATION('','',#109982); +#109982 = PRODUCT('PinSocket_1x06_P2.54mm_Vertical', + 'PinSocket_1x06_P2.54mm_Vertical','',(#109983)); +#109983 = PRODUCT_CONTEXT('',#2,'mechanical'); +#109984 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#109985 = SHAPE_REPRESENTATION('',(#11,#109986),#109990); +#109986 = AXIS2_PLACEMENT_3D('',#109987,#109988,#109989); +#109987 = CARTESIAN_POINT('',(0.,0.,0.)); +#109988 = DIRECTION('',(0.,0.,1.)); +#109989 = DIRECTION('',(1.,0.,-0.)); +#109990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#109994)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#109991,#109992,#109993)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#109991 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#109992 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#109993 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#109994 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#109991, + 'distance_accuracy_value','confusion accuracy'); +#109995 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#109996,#109998); +#109996 = ( REPRESENTATION_RELATIONSHIP('','',#109985,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#109997) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#109997 = ITEM_DEFINED_TRANSFORMATION('','',#11,#483); +#109998 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #109999); +#109999 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('154','MOD1','',#5,#109980,$); +#110000 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#109982)); +#110001 = SHAPE_DEFINITION_REPRESENTATION(#110002,#110008); +#110002 = PRODUCT_DEFINITION_SHAPE('','',#110003); +#110003 = PRODUCT_DEFINITION('design','',#110004,#110007); +#110004 = PRODUCT_DEFINITION_FORMATION('','',#110005); +#110005 = PRODUCT('PinSocket_1x06_P2.54mm_Vertical', + 'PinSocket_1x06_P2.54mm_Vertical','',(#110006)); +#110006 = PRODUCT_CONTEXT('',#2,'mechanical'); +#110007 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#110008 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#110009),#114947); +#110009 = MANIFOLD_SOLID_BREP('',#110010); +#110010 = CLOSED_SHELL('',(#110011,#110051,#110114,#110177,#110194, + #110415,#110437,#110454,#110867,#110879,#110891,#110922,#110946, + #110970,#110987,#111018,#111042,#111066,#111083,#111114,#111138, + #111162,#111179,#111210,#111234,#111258,#111275,#111306,#111330, + #111354,#111371,#111402,#111426,#111450,#111467,#111484,#111531, + #111548,#111595,#111612,#111659,#111676,#111723,#111740,#111787, + #111804,#111851,#111868,#111915,#111932,#111979,#111996,#112043, + #112060,#112107,#112124,#112171,#112188,#112235,#112266,#112322, + #112346,#112395,#112426,#112482,#112506,#112555,#112586,#112642, + #112666,#112715,#112746,#112802,#112826,#112875,#112906,#112962, + #112986,#113035,#113066,#113122,#113146,#113195,#113212,#113229, + #113246,#113263,#113275,#113292,#113309,#113326,#113343,#113355, + #113372,#113389,#113406,#113423,#113435,#113452,#113469,#113486, + #113503,#113515,#113532,#113549,#113566,#113583,#113595,#113612, + #113629,#113646,#113663,#113675,#113692,#113709,#113758,#113782, + #113824,#113841,#113858,#113875,#113924,#113948,#113990,#114007, + #114024,#114041,#114090,#114114,#114156,#114173,#114190,#114207, + #114256,#114280,#114322,#114339,#114356,#114373,#114422,#114446, + #114488,#114505,#114522,#114539,#114588,#114612,#114654,#114671, + #114688,#114705,#114717,#114734,#114751,#114763,#114780,#114797, + #114809,#114826,#114843,#114855,#114872,#114889,#114901,#114918, + #114935)); +#110011 = ADVANCED_FACE('',(#110012),#110046,.F.); +#110012 = FACE_BOUND('',#110013,.F.); +#110013 = EDGE_LOOP('',(#110014,#110024,#110032,#110040)); +#110014 = ORIENTED_EDGE('',*,*,#110015,.T.); +#110015 = EDGE_CURVE('',#110016,#110018,#110020,.T.); +#110016 = VERTEX_POINT('',#110017); +#110017 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110018 = VERTEX_POINT('',#110019); +#110019 = CARTESIAN_POINT('',(1.27,-13.97,8.5)); +#110020 = LINE('',#110021,#110022); +#110021 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110022 = VECTOR('',#110023,1.); +#110023 = DIRECTION('',(0.,0.,1.)); +#110024 = ORIENTED_EDGE('',*,*,#110025,.T.); +#110025 = EDGE_CURVE('',#110018,#110026,#110028,.T.); +#110026 = VERTEX_POINT('',#110027); +#110027 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#110028 = LINE('',#110029,#110030); +#110029 = CARTESIAN_POINT('',(1.27,-13.97,8.5)); +#110030 = VECTOR('',#110031,1.); +#110031 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110032 = ORIENTED_EDGE('',*,*,#110033,.F.); +#110033 = EDGE_CURVE('',#110034,#110026,#110036,.T.); +#110034 = VERTEX_POINT('',#110035); +#110035 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110036 = LINE('',#110037,#110038); +#110037 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110038 = VECTOR('',#110039,1.); +#110039 = DIRECTION('',(0.,0.,1.)); +#110040 = ORIENTED_EDGE('',*,*,#110041,.F.); +#110041 = EDGE_CURVE('',#110016,#110034,#110042,.T.); +#110042 = LINE('',#110043,#110044); +#110043 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110044 = VECTOR('',#110045,1.); +#110045 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110046 = PLANE('',#110047); +#110047 = AXIS2_PLACEMENT_3D('',#110048,#110049,#110050); +#110048 = CARTESIAN_POINT('',(1.27,-13.97,0.)); +#110049 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110050 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110051 = ADVANCED_FACE('',(#110052),#110109,.F.); +#110052 = FACE_BOUND('',#110053,.F.); +#110053 = EDGE_LOOP('',(#110054,#110064,#110072,#110078,#110079,#110087, + #110095,#110103)); +#110054 = ORIENTED_EDGE('',*,*,#110055,.F.); +#110055 = EDGE_CURVE('',#110056,#110058,#110060,.T.); +#110056 = VERTEX_POINT('',#110057); +#110057 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110058 = VERTEX_POINT('',#110059); +#110059 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.)); +#110060 = LINE('',#110061,#110062); +#110061 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110062 = VECTOR('',#110063,1.); +#110063 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110064 = ORIENTED_EDGE('',*,*,#110065,.T.); +#110065 = EDGE_CURVE('',#110056,#110066,#110068,.T.); +#110066 = VERTEX_POINT('',#110067); +#110067 = CARTESIAN_POINT('',(-1.27,-13.97,8.5)); +#110068 = LINE('',#110069,#110070); +#110069 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110070 = VECTOR('',#110071,1.); +#110071 = DIRECTION('',(0.,0.,1.)); +#110072 = ORIENTED_EDGE('',*,*,#110073,.T.); +#110073 = EDGE_CURVE('',#110066,#110018,#110074,.T.); +#110074 = LINE('',#110075,#110076); +#110075 = CARTESIAN_POINT('',(-1.27,-13.97,8.5)); +#110076 = VECTOR('',#110077,1.); +#110077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110078 = ORIENTED_EDGE('',*,*,#110015,.F.); +#110079 = ORIENTED_EDGE('',*,*,#110080,.F.); +#110080 = EDGE_CURVE('',#110081,#110016,#110083,.T.); +#110081 = VERTEX_POINT('',#110082); +#110082 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110083 = LINE('',#110084,#110085); +#110084 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110085 = VECTOR('',#110086,1.); +#110086 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110087 = ORIENTED_EDGE('',*,*,#110088,.T.); +#110088 = EDGE_CURVE('',#110081,#110089,#110091,.T.); +#110089 = VERTEX_POINT('',#110090); +#110090 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.2)); +#110091 = LINE('',#110092,#110093); +#110092 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110093 = VECTOR('',#110094,1.); +#110094 = DIRECTION('',(0.,0.,1.)); +#110095 = ORIENTED_EDGE('',*,*,#110096,.F.); +#110096 = EDGE_CURVE('',#110097,#110089,#110099,.T.); +#110097 = VERTEX_POINT('',#110098); +#110098 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.2)); +#110099 = LINE('',#110100,#110101); +#110100 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.2)); +#110101 = VECTOR('',#110102,1.); +#110102 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110103 = ORIENTED_EDGE('',*,*,#110104,.F.); +#110104 = EDGE_CURVE('',#110058,#110097,#110105,.T.); +#110105 = LINE('',#110106,#110107); +#110106 = CARTESIAN_POINT('',(-0.846666666667,-13.97,0.)); +#110107 = VECTOR('',#110108,1.); +#110108 = DIRECTION('',(0.,0.,1.)); +#110109 = PLANE('',#110110); +#110110 = AXIS2_PLACEMENT_3D('',#110111,#110112,#110113); +#110111 = CARTESIAN_POINT('',(-1.27,-13.97,0.)); +#110112 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110113 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110114 = ADVANCED_FACE('',(#110115),#110172,.F.); +#110115 = FACE_BOUND('',#110116,.F.); +#110116 = EDGE_LOOP('',(#110117,#110125,#110126,#110134,#110142,#110150, + #110158,#110166)); +#110117 = ORIENTED_EDGE('',*,*,#110118,.F.); +#110118 = EDGE_CURVE('',#110034,#110119,#110121,.T.); +#110119 = VERTEX_POINT('',#110120); +#110120 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#110121 = LINE('',#110122,#110123); +#110122 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110123 = VECTOR('',#110124,1.); +#110124 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110125 = ORIENTED_EDGE('',*,*,#110033,.T.); +#110126 = ORIENTED_EDGE('',*,*,#110127,.T.); +#110127 = EDGE_CURVE('',#110026,#110128,#110130,.T.); +#110128 = VERTEX_POINT('',#110129); +#110129 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#110130 = LINE('',#110131,#110132); +#110131 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#110132 = VECTOR('',#110133,1.); +#110133 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110134 = ORIENTED_EDGE('',*,*,#110135,.F.); +#110135 = EDGE_CURVE('',#110136,#110128,#110138,.T.); +#110136 = VERTEX_POINT('',#110137); +#110137 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110138 = LINE('',#110139,#110140); +#110139 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110140 = VECTOR('',#110141,1.); +#110141 = DIRECTION('',(0.,0.,1.)); +#110142 = ORIENTED_EDGE('',*,*,#110143,.F.); +#110143 = EDGE_CURVE('',#110144,#110136,#110146,.T.); +#110144 = VERTEX_POINT('',#110145); +#110145 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110146 = LINE('',#110147,#110148); +#110147 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110148 = VECTOR('',#110149,1.); +#110149 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110150 = ORIENTED_EDGE('',*,*,#110151,.T.); +#110151 = EDGE_CURVE('',#110144,#110152,#110154,.T.); +#110152 = VERTEX_POINT('',#110153); +#110153 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#110154 = LINE('',#110155,#110156); +#110155 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110156 = VECTOR('',#110157,1.); +#110157 = DIRECTION('',(0.,0.,1.)); +#110158 = ORIENTED_EDGE('',*,*,#110159,.F.); +#110159 = EDGE_CURVE('',#110160,#110152,#110162,.T.); +#110160 = VERTEX_POINT('',#110161); +#110161 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#110162 = LINE('',#110163,#110164); +#110163 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#110164 = VECTOR('',#110165,1.); +#110165 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110166 = ORIENTED_EDGE('',*,*,#110167,.F.); +#110167 = EDGE_CURVE('',#110119,#110160,#110168,.T.); +#110168 = LINE('',#110169,#110170); +#110169 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#110170 = VECTOR('',#110171,1.); +#110171 = DIRECTION('',(0.,0.,1.)); +#110172 = PLANE('',#110173); +#110173 = AXIS2_PLACEMENT_3D('',#110174,#110175,#110176); +#110174 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#110175 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110176 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110177 = ADVANCED_FACE('',(#110178),#110189,.F.); +#110178 = FACE_BOUND('',#110179,.F.); +#110179 = EDGE_LOOP('',(#110180,#110181,#110182,#110183)); +#110180 = ORIENTED_EDGE('',*,*,#110080,.T.); +#110181 = ORIENTED_EDGE('',*,*,#110041,.T.); +#110182 = ORIENTED_EDGE('',*,*,#110118,.T.); +#110183 = ORIENTED_EDGE('',*,*,#110184,.F.); +#110184 = EDGE_CURVE('',#110081,#110119,#110185,.T.); +#110185 = LINE('',#110186,#110187); +#110186 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110187 = VECTOR('',#110188,1.); +#110188 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110189 = PLANE('',#110190); +#110190 = AXIS2_PLACEMENT_3D('',#110191,#110192,#110193); +#110191 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,0.)); +#110192 = DIRECTION('',(0.,0.,1.)); +#110193 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110194 = ADVANCED_FACE('',(#110195,#110206,#110240,#110274,#110308, + #110342,#110376),#110410,.T.); +#110195 = FACE_BOUND('',#110196,.T.); +#110196 = EDGE_LOOP('',(#110197,#110198,#110199,#110205)); +#110197 = ORIENTED_EDGE('',*,*,#110025,.T.); +#110198 = ORIENTED_EDGE('',*,*,#110127,.T.); +#110199 = ORIENTED_EDGE('',*,*,#110200,.T.); +#110200 = EDGE_CURVE('',#110128,#110066,#110201,.T.); +#110201 = LINE('',#110202,#110203); +#110202 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#110203 = VECTOR('',#110204,1.); +#110204 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110205 = ORIENTED_EDGE('',*,*,#110073,.T.); +#110206 = FACE_BOUND('',#110207,.T.); +#110207 = EDGE_LOOP('',(#110208,#110218,#110226,#110234)); +#110208 = ORIENTED_EDGE('',*,*,#110209,.F.); +#110209 = EDGE_CURVE('',#110210,#110212,#110214,.T.); +#110210 = VERTEX_POINT('',#110211); +#110211 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#110212 = VERTEX_POINT('',#110213); +#110213 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#110214 = LINE('',#110215,#110216); +#110215 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#110216 = VECTOR('',#110217,1.); +#110217 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110218 = ORIENTED_EDGE('',*,*,#110219,.F.); +#110219 = EDGE_CURVE('',#110220,#110210,#110222,.T.); +#110220 = VERTEX_POINT('',#110221); +#110221 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#110222 = LINE('',#110223,#110224); +#110223 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#110224 = VECTOR('',#110225,1.); +#110225 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110226 = ORIENTED_EDGE('',*,*,#110227,.F.); +#110227 = EDGE_CURVE('',#110228,#110220,#110230,.T.); +#110228 = VERTEX_POINT('',#110229); +#110229 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#110230 = LINE('',#110231,#110232); +#110231 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#110232 = VECTOR('',#110233,1.); +#110233 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110234 = ORIENTED_EDGE('',*,*,#110235,.F.); +#110235 = EDGE_CURVE('',#110212,#110228,#110236,.T.); +#110236 = LINE('',#110237,#110238); +#110237 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#110238 = VECTOR('',#110239,1.); +#110239 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110240 = FACE_BOUND('',#110241,.T.); +#110241 = EDGE_LOOP('',(#110242,#110252,#110260,#110268)); +#110242 = ORIENTED_EDGE('',*,*,#110243,.F.); +#110243 = EDGE_CURVE('',#110244,#110246,#110248,.T.); +#110244 = VERTEX_POINT('',#110245); +#110245 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#110246 = VERTEX_POINT('',#110247); +#110247 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#110248 = LINE('',#110249,#110250); +#110249 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#110250 = VECTOR('',#110251,1.); +#110251 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110252 = ORIENTED_EDGE('',*,*,#110253,.F.); +#110253 = EDGE_CURVE('',#110254,#110244,#110256,.T.); +#110254 = VERTEX_POINT('',#110255); +#110255 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#110256 = LINE('',#110257,#110258); +#110257 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#110258 = VECTOR('',#110259,1.); +#110259 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110260 = ORIENTED_EDGE('',*,*,#110261,.F.); +#110261 = EDGE_CURVE('',#110262,#110254,#110264,.T.); +#110262 = VERTEX_POINT('',#110263); +#110263 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#110264 = LINE('',#110265,#110266); +#110265 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#110266 = VECTOR('',#110267,1.); +#110267 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110268 = ORIENTED_EDGE('',*,*,#110269,.F.); +#110269 = EDGE_CURVE('',#110246,#110262,#110270,.T.); +#110270 = LINE('',#110271,#110272); +#110271 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#110272 = VECTOR('',#110273,1.); +#110273 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110274 = FACE_BOUND('',#110275,.T.); +#110275 = EDGE_LOOP('',(#110276,#110286,#110294,#110302)); +#110276 = ORIENTED_EDGE('',*,*,#110277,.F.); +#110277 = EDGE_CURVE('',#110278,#110280,#110282,.T.); +#110278 = VERTEX_POINT('',#110279); +#110279 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#110280 = VERTEX_POINT('',#110281); +#110281 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#110282 = LINE('',#110283,#110284); +#110283 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#110284 = VECTOR('',#110285,1.); +#110285 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110286 = ORIENTED_EDGE('',*,*,#110287,.F.); +#110287 = EDGE_CURVE('',#110288,#110278,#110290,.T.); +#110288 = VERTEX_POINT('',#110289); +#110289 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#110290 = LINE('',#110291,#110292); +#110291 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#110292 = VECTOR('',#110293,1.); +#110293 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110294 = ORIENTED_EDGE('',*,*,#110295,.F.); +#110295 = EDGE_CURVE('',#110296,#110288,#110298,.T.); +#110296 = VERTEX_POINT('',#110297); +#110297 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#110298 = LINE('',#110299,#110300); +#110299 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#110300 = VECTOR('',#110301,1.); +#110301 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110302 = ORIENTED_EDGE('',*,*,#110303,.F.); +#110303 = EDGE_CURVE('',#110280,#110296,#110304,.T.); +#110304 = LINE('',#110305,#110306); +#110305 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#110306 = VECTOR('',#110307,1.); +#110307 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110308 = FACE_BOUND('',#110309,.T.); +#110309 = EDGE_LOOP('',(#110310,#110320,#110328,#110336)); +#110310 = ORIENTED_EDGE('',*,*,#110311,.F.); +#110311 = EDGE_CURVE('',#110312,#110314,#110316,.T.); +#110312 = VERTEX_POINT('',#110313); +#110313 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#110314 = VERTEX_POINT('',#110315); +#110315 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#110316 = LINE('',#110317,#110318); +#110317 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#110318 = VECTOR('',#110319,1.); +#110319 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110320 = ORIENTED_EDGE('',*,*,#110321,.F.); +#110321 = EDGE_CURVE('',#110322,#110312,#110324,.T.); +#110322 = VERTEX_POINT('',#110323); +#110323 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#110324 = LINE('',#110325,#110326); +#110325 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#110326 = VECTOR('',#110327,1.); +#110327 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110328 = ORIENTED_EDGE('',*,*,#110329,.F.); +#110329 = EDGE_CURVE('',#110330,#110322,#110332,.T.); +#110330 = VERTEX_POINT('',#110331); +#110331 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#110332 = LINE('',#110333,#110334); +#110333 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#110334 = VECTOR('',#110335,1.); +#110335 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110336 = ORIENTED_EDGE('',*,*,#110337,.F.); +#110337 = EDGE_CURVE('',#110314,#110330,#110338,.T.); +#110338 = LINE('',#110339,#110340); +#110339 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#110340 = VECTOR('',#110341,1.); +#110341 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110342 = FACE_BOUND('',#110343,.T.); +#110343 = EDGE_LOOP('',(#110344,#110354,#110362,#110370)); +#110344 = ORIENTED_EDGE('',*,*,#110345,.F.); +#110345 = EDGE_CURVE('',#110346,#110348,#110350,.T.); +#110346 = VERTEX_POINT('',#110347); +#110347 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#110348 = VERTEX_POINT('',#110349); +#110349 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#110350 = LINE('',#110351,#110352); +#110351 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#110352 = VECTOR('',#110353,1.); +#110353 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110354 = ORIENTED_EDGE('',*,*,#110355,.F.); +#110355 = EDGE_CURVE('',#110356,#110346,#110358,.T.); +#110356 = VERTEX_POINT('',#110357); +#110357 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#110358 = LINE('',#110359,#110360); +#110359 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#110360 = VECTOR('',#110361,1.); +#110361 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110362 = ORIENTED_EDGE('',*,*,#110363,.F.); +#110363 = EDGE_CURVE('',#110364,#110356,#110366,.T.); +#110364 = VERTEX_POINT('',#110365); +#110365 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#110366 = LINE('',#110367,#110368); +#110367 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#110368 = VECTOR('',#110369,1.); +#110369 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110370 = ORIENTED_EDGE('',*,*,#110371,.F.); +#110371 = EDGE_CURVE('',#110348,#110364,#110372,.T.); +#110372 = LINE('',#110373,#110374); +#110373 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#110374 = VECTOR('',#110375,1.); +#110375 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110376 = FACE_BOUND('',#110377,.T.); +#110377 = EDGE_LOOP('',(#110378,#110388,#110396,#110404)); +#110378 = ORIENTED_EDGE('',*,*,#110379,.F.); +#110379 = EDGE_CURVE('',#110380,#110382,#110384,.T.); +#110380 = VERTEX_POINT('',#110381); +#110381 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#110382 = VERTEX_POINT('',#110383); +#110383 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#110384 = LINE('',#110385,#110386); +#110385 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#110386 = VECTOR('',#110387,1.); +#110387 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110388 = ORIENTED_EDGE('',*,*,#110389,.F.); +#110389 = EDGE_CURVE('',#110390,#110380,#110392,.T.); +#110390 = VERTEX_POINT('',#110391); +#110391 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#110392 = LINE('',#110393,#110394); +#110393 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#110394 = VECTOR('',#110395,1.); +#110395 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110396 = ORIENTED_EDGE('',*,*,#110397,.F.); +#110397 = EDGE_CURVE('',#110398,#110390,#110400,.T.); +#110398 = VERTEX_POINT('',#110399); +#110399 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#110400 = LINE('',#110401,#110402); +#110401 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#110402 = VECTOR('',#110403,1.); +#110403 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110404 = ORIENTED_EDGE('',*,*,#110405,.F.); +#110405 = EDGE_CURVE('',#110382,#110398,#110406,.T.); +#110406 = LINE('',#110407,#110408); +#110407 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#110408 = VECTOR('',#110409,1.); +#110409 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110410 = PLANE('',#110411); +#110411 = AXIS2_PLACEMENT_3D('',#110412,#110413,#110414); +#110412 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,8.5)); +#110413 = DIRECTION('',(0.,0.,1.)); +#110414 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110415 = ADVANCED_FACE('',(#110416),#110432,.F.); +#110416 = FACE_BOUND('',#110417,.F.); +#110417 = EDGE_LOOP('',(#110418,#110419,#110425,#110426)); +#110418 = ORIENTED_EDGE('',*,*,#110055,.T.); +#110419 = ORIENTED_EDGE('',*,*,#110420,.F.); +#110420 = EDGE_CURVE('',#110144,#110058,#110421,.T.); +#110421 = LINE('',#110422,#110423); +#110422 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110423 = VECTOR('',#110424,1.); +#110424 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110425 = ORIENTED_EDGE('',*,*,#110143,.T.); +#110426 = ORIENTED_EDGE('',*,*,#110427,.T.); +#110427 = EDGE_CURVE('',#110136,#110056,#110428,.T.); +#110428 = LINE('',#110429,#110430); +#110429 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110430 = VECTOR('',#110431,1.); +#110431 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110432 = PLANE('',#110433); +#110433 = AXIS2_PLACEMENT_3D('',#110434,#110435,#110436); +#110434 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,0.)); +#110435 = DIRECTION('',(0.,0.,1.)); +#110436 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110437 = ADVANCED_FACE('',(#110438),#110449,.T.); +#110438 = FACE_BOUND('',#110439,.T.); +#110439 = EDGE_LOOP('',(#110440,#110441,#110447,#110448)); +#110440 = ORIENTED_EDGE('',*,*,#110151,.T.); +#110441 = ORIENTED_EDGE('',*,*,#110442,.T.); +#110442 = EDGE_CURVE('',#110152,#110097,#110443,.T.); +#110443 = LINE('',#110444,#110445); +#110444 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#110445 = VECTOR('',#110446,1.); +#110446 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110447 = ORIENTED_EDGE('',*,*,#110104,.F.); +#110448 = ORIENTED_EDGE('',*,*,#110420,.F.); +#110449 = PLANE('',#110450); +#110450 = AXIS2_PLACEMENT_3D('',#110451,#110452,#110453); +#110451 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#110452 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110453 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110454 = ADVANCED_FACE('',(#110455,#110466,#110532,#110598,#110664, + #110730,#110796),#110862,.F.); +#110455 = FACE_BOUND('',#110456,.F.); +#110456 = EDGE_LOOP('',(#110457,#110463,#110464,#110465)); +#110457 = ORIENTED_EDGE('',*,*,#110458,.T.); +#110458 = EDGE_CURVE('',#110089,#110160,#110459,.T.); +#110459 = LINE('',#110460,#110461); +#110460 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.2)); +#110461 = VECTOR('',#110462,1.); +#110462 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110463 = ORIENTED_EDGE('',*,*,#110159,.T.); +#110464 = ORIENTED_EDGE('',*,*,#110442,.T.); +#110465 = ORIENTED_EDGE('',*,*,#110096,.T.); +#110466 = FACE_BOUND('',#110467,.F.); +#110467 = EDGE_LOOP('',(#110468,#110478,#110486,#110494,#110502,#110510, + #110518,#110526)); +#110468 = ORIENTED_EDGE('',*,*,#110469,.F.); +#110469 = EDGE_CURVE('',#110470,#110472,#110474,.T.); +#110470 = VERTEX_POINT('',#110471); +#110471 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110472 = VERTEX_POINT('',#110473); +#110473 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#110474 = LINE('',#110475,#110476); +#110475 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110476 = VECTOR('',#110477,1.); +#110477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110478 = ORIENTED_EDGE('',*,*,#110479,.T.); +#110479 = EDGE_CURVE('',#110470,#110480,#110482,.T.); +#110480 = VERTEX_POINT('',#110481); +#110481 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#110482 = LINE('',#110483,#110484); +#110483 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110484 = VECTOR('',#110485,1.); +#110485 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110486 = ORIENTED_EDGE('',*,*,#110487,.F.); +#110487 = EDGE_CURVE('',#110488,#110480,#110490,.T.); +#110488 = VERTEX_POINT('',#110489); +#110489 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#110490 = LINE('',#110491,#110492); +#110491 = CARTESIAN_POINT('',(-0.1,-9.525,0.2)); +#110492 = VECTOR('',#110493,1.); +#110493 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110494 = ORIENTED_EDGE('',*,*,#110495,.T.); +#110495 = EDGE_CURVE('',#110488,#110496,#110498,.T.); +#110496 = VERTEX_POINT('',#110497); +#110497 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#110498 = LINE('',#110499,#110500); +#110499 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#110500 = VECTOR('',#110501,1.); +#110501 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110502 = ORIENTED_EDGE('',*,*,#110503,.T.); +#110503 = EDGE_CURVE('',#110496,#110504,#110506,.T.); +#110504 = VERTEX_POINT('',#110505); +#110505 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#110506 = LINE('',#110507,#110508); +#110507 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#110508 = VECTOR('',#110509,1.); +#110509 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110510 = ORIENTED_EDGE('',*,*,#110511,.T.); +#110511 = EDGE_CURVE('',#110504,#110512,#110514,.T.); +#110512 = VERTEX_POINT('',#110513); +#110513 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#110514 = LINE('',#110515,#110516); +#110515 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#110516 = VECTOR('',#110517,1.); +#110517 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110518 = ORIENTED_EDGE('',*,*,#110519,.T.); +#110519 = EDGE_CURVE('',#110512,#110520,#110522,.T.); +#110520 = VERTEX_POINT('',#110521); +#110521 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#110522 = LINE('',#110523,#110524); +#110523 = CARTESIAN_POINT('',(0.1,-9.525,0.2)); +#110524 = VECTOR('',#110525,1.); +#110525 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110526 = ORIENTED_EDGE('',*,*,#110527,.T.); +#110527 = EDGE_CURVE('',#110520,#110472,#110528,.T.); +#110528 = LINE('',#110529,#110530); +#110529 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#110530 = VECTOR('',#110531,1.); +#110531 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110532 = FACE_BOUND('',#110533,.F.); +#110533 = EDGE_LOOP('',(#110534,#110544,#110552,#110560,#110568,#110576, + #110584,#110592)); +#110534 = ORIENTED_EDGE('',*,*,#110535,.F.); +#110535 = EDGE_CURVE('',#110536,#110538,#110540,.T.); +#110536 = VERTEX_POINT('',#110537); +#110537 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110538 = VERTEX_POINT('',#110539); +#110539 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#110540 = LINE('',#110541,#110542); +#110541 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110542 = VECTOR('',#110543,1.); +#110543 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110544 = ORIENTED_EDGE('',*,*,#110545,.T.); +#110545 = EDGE_CURVE('',#110536,#110546,#110548,.T.); +#110546 = VERTEX_POINT('',#110547); +#110547 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#110548 = LINE('',#110549,#110550); +#110549 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110550 = VECTOR('',#110551,1.); +#110551 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110552 = ORIENTED_EDGE('',*,*,#110553,.F.); +#110553 = EDGE_CURVE('',#110554,#110546,#110556,.T.); +#110554 = VERTEX_POINT('',#110555); +#110555 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#110556 = LINE('',#110557,#110558); +#110557 = CARTESIAN_POINT('',(-0.1,-8.255,0.2)); +#110558 = VECTOR('',#110559,1.); +#110559 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110560 = ORIENTED_EDGE('',*,*,#110561,.T.); +#110561 = EDGE_CURVE('',#110554,#110562,#110564,.T.); +#110562 = VERTEX_POINT('',#110563); +#110563 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#110564 = LINE('',#110565,#110566); +#110565 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#110566 = VECTOR('',#110567,1.); +#110567 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110568 = ORIENTED_EDGE('',*,*,#110569,.T.); +#110569 = EDGE_CURVE('',#110562,#110570,#110572,.T.); +#110570 = VERTEX_POINT('',#110571); +#110571 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#110572 = LINE('',#110573,#110574); +#110573 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#110574 = VECTOR('',#110575,1.); +#110575 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110576 = ORIENTED_EDGE('',*,*,#110577,.T.); +#110577 = EDGE_CURVE('',#110570,#110578,#110580,.T.); +#110578 = VERTEX_POINT('',#110579); +#110579 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#110580 = LINE('',#110581,#110582); +#110581 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#110582 = VECTOR('',#110583,1.); +#110583 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110584 = ORIENTED_EDGE('',*,*,#110585,.T.); +#110585 = EDGE_CURVE('',#110578,#110586,#110588,.T.); +#110586 = VERTEX_POINT('',#110587); +#110587 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#110588 = LINE('',#110589,#110590); +#110589 = CARTESIAN_POINT('',(0.1,-8.255,0.2)); +#110590 = VECTOR('',#110591,1.); +#110591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110592 = ORIENTED_EDGE('',*,*,#110593,.T.); +#110593 = EDGE_CURVE('',#110586,#110538,#110594,.T.); +#110594 = LINE('',#110595,#110596); +#110595 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#110596 = VECTOR('',#110597,1.); +#110597 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110598 = FACE_BOUND('',#110599,.F.); +#110599 = EDGE_LOOP('',(#110600,#110610,#110618,#110626,#110634,#110642, + #110650,#110658)); +#110600 = ORIENTED_EDGE('',*,*,#110601,.F.); +#110601 = EDGE_CURVE('',#110602,#110604,#110606,.T.); +#110602 = VERTEX_POINT('',#110603); +#110603 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110604 = VERTEX_POINT('',#110605); +#110605 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#110606 = LINE('',#110607,#110608); +#110607 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110608 = VECTOR('',#110609,1.); +#110609 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110610 = ORIENTED_EDGE('',*,*,#110611,.T.); +#110611 = EDGE_CURVE('',#110602,#110612,#110614,.T.); +#110612 = VERTEX_POINT('',#110613); +#110613 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#110614 = LINE('',#110615,#110616); +#110615 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110616 = VECTOR('',#110617,1.); +#110617 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110618 = ORIENTED_EDGE('',*,*,#110619,.F.); +#110619 = EDGE_CURVE('',#110620,#110612,#110622,.T.); +#110620 = VERTEX_POINT('',#110621); +#110621 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#110622 = LINE('',#110623,#110624); +#110623 = CARTESIAN_POINT('',(-0.1,-6.985,0.2)); +#110624 = VECTOR('',#110625,1.); +#110625 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110626 = ORIENTED_EDGE('',*,*,#110627,.T.); +#110627 = EDGE_CURVE('',#110620,#110628,#110630,.T.); +#110628 = VERTEX_POINT('',#110629); +#110629 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#110630 = LINE('',#110631,#110632); +#110631 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#110632 = VECTOR('',#110633,1.); +#110633 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110634 = ORIENTED_EDGE('',*,*,#110635,.T.); +#110635 = EDGE_CURVE('',#110628,#110636,#110638,.T.); +#110636 = VERTEX_POINT('',#110637); +#110637 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#110638 = LINE('',#110639,#110640); +#110639 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#110640 = VECTOR('',#110641,1.); +#110641 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110642 = ORIENTED_EDGE('',*,*,#110643,.T.); +#110643 = EDGE_CURVE('',#110636,#110644,#110646,.T.); +#110644 = VERTEX_POINT('',#110645); +#110645 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#110646 = LINE('',#110647,#110648); +#110647 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#110648 = VECTOR('',#110649,1.); +#110649 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110650 = ORIENTED_EDGE('',*,*,#110651,.T.); +#110651 = EDGE_CURVE('',#110644,#110652,#110654,.T.); +#110652 = VERTEX_POINT('',#110653); +#110653 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#110654 = LINE('',#110655,#110656); +#110655 = CARTESIAN_POINT('',(0.1,-6.985,0.2)); +#110656 = VECTOR('',#110657,1.); +#110657 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110658 = ORIENTED_EDGE('',*,*,#110659,.T.); +#110659 = EDGE_CURVE('',#110652,#110604,#110660,.T.); +#110660 = LINE('',#110661,#110662); +#110661 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#110662 = VECTOR('',#110663,1.); +#110663 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110664 = FACE_BOUND('',#110665,.F.); +#110665 = EDGE_LOOP('',(#110666,#110676,#110684,#110692,#110700,#110708, + #110716,#110724)); +#110666 = ORIENTED_EDGE('',*,*,#110667,.F.); +#110667 = EDGE_CURVE('',#110668,#110670,#110672,.T.); +#110668 = VERTEX_POINT('',#110669); +#110669 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110670 = VERTEX_POINT('',#110671); +#110671 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#110672 = LINE('',#110673,#110674); +#110673 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110674 = VECTOR('',#110675,1.); +#110675 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110676 = ORIENTED_EDGE('',*,*,#110677,.T.); +#110677 = EDGE_CURVE('',#110668,#110678,#110680,.T.); +#110678 = VERTEX_POINT('',#110679); +#110679 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#110680 = LINE('',#110681,#110682); +#110681 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110682 = VECTOR('',#110683,1.); +#110683 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110684 = ORIENTED_EDGE('',*,*,#110685,.F.); +#110685 = EDGE_CURVE('',#110686,#110678,#110688,.T.); +#110686 = VERTEX_POINT('',#110687); +#110687 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#110688 = LINE('',#110689,#110690); +#110689 = CARTESIAN_POINT('',(-0.1,-5.715,0.2)); +#110690 = VECTOR('',#110691,1.); +#110691 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110692 = ORIENTED_EDGE('',*,*,#110693,.T.); +#110693 = EDGE_CURVE('',#110686,#110694,#110696,.T.); +#110694 = VERTEX_POINT('',#110695); +#110695 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#110696 = LINE('',#110697,#110698); +#110697 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#110698 = VECTOR('',#110699,1.); +#110699 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110700 = ORIENTED_EDGE('',*,*,#110701,.T.); +#110701 = EDGE_CURVE('',#110694,#110702,#110704,.T.); +#110702 = VERTEX_POINT('',#110703); +#110703 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#110704 = LINE('',#110705,#110706); +#110705 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#110706 = VECTOR('',#110707,1.); +#110707 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110708 = ORIENTED_EDGE('',*,*,#110709,.T.); +#110709 = EDGE_CURVE('',#110702,#110710,#110712,.T.); +#110710 = VERTEX_POINT('',#110711); +#110711 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#110712 = LINE('',#110713,#110714); +#110713 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#110714 = VECTOR('',#110715,1.); +#110715 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110716 = ORIENTED_EDGE('',*,*,#110717,.T.); +#110717 = EDGE_CURVE('',#110710,#110718,#110720,.T.); +#110718 = VERTEX_POINT('',#110719); +#110719 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#110720 = LINE('',#110721,#110722); +#110721 = CARTESIAN_POINT('',(0.1,-5.715,0.2)); +#110722 = VECTOR('',#110723,1.); +#110723 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110724 = ORIENTED_EDGE('',*,*,#110725,.T.); +#110725 = EDGE_CURVE('',#110718,#110670,#110726,.T.); +#110726 = LINE('',#110727,#110728); +#110727 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#110728 = VECTOR('',#110729,1.); +#110729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110730 = FACE_BOUND('',#110731,.F.); +#110731 = EDGE_LOOP('',(#110732,#110742,#110750,#110758,#110766,#110774, + #110782,#110790)); +#110732 = ORIENTED_EDGE('',*,*,#110733,.F.); +#110733 = EDGE_CURVE('',#110734,#110736,#110738,.T.); +#110734 = VERTEX_POINT('',#110735); +#110735 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110736 = VERTEX_POINT('',#110737); +#110737 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#110738 = LINE('',#110739,#110740); +#110739 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110740 = VECTOR('',#110741,1.); +#110741 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110742 = ORIENTED_EDGE('',*,*,#110743,.T.); +#110743 = EDGE_CURVE('',#110734,#110744,#110746,.T.); +#110744 = VERTEX_POINT('',#110745); +#110745 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#110746 = LINE('',#110747,#110748); +#110747 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110748 = VECTOR('',#110749,1.); +#110749 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110750 = ORIENTED_EDGE('',*,*,#110751,.F.); +#110751 = EDGE_CURVE('',#110752,#110744,#110754,.T.); +#110752 = VERTEX_POINT('',#110753); +#110753 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#110754 = LINE('',#110755,#110756); +#110755 = CARTESIAN_POINT('',(-0.1,-4.445,0.2)); +#110756 = VECTOR('',#110757,1.); +#110757 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110758 = ORIENTED_EDGE('',*,*,#110759,.T.); +#110759 = EDGE_CURVE('',#110752,#110760,#110762,.T.); +#110760 = VERTEX_POINT('',#110761); +#110761 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#110762 = LINE('',#110763,#110764); +#110763 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#110764 = VECTOR('',#110765,1.); +#110765 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110766 = ORIENTED_EDGE('',*,*,#110767,.T.); +#110767 = EDGE_CURVE('',#110760,#110768,#110770,.T.); +#110768 = VERTEX_POINT('',#110769); +#110769 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#110770 = LINE('',#110771,#110772); +#110771 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#110772 = VECTOR('',#110773,1.); +#110773 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110774 = ORIENTED_EDGE('',*,*,#110775,.T.); +#110775 = EDGE_CURVE('',#110768,#110776,#110778,.T.); +#110776 = VERTEX_POINT('',#110777); +#110777 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#110778 = LINE('',#110779,#110780); +#110779 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#110780 = VECTOR('',#110781,1.); +#110781 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110782 = ORIENTED_EDGE('',*,*,#110783,.T.); +#110783 = EDGE_CURVE('',#110776,#110784,#110786,.T.); +#110784 = VERTEX_POINT('',#110785); +#110785 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#110786 = LINE('',#110787,#110788); +#110787 = CARTESIAN_POINT('',(0.1,-4.445,0.2)); +#110788 = VECTOR('',#110789,1.); +#110789 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110790 = ORIENTED_EDGE('',*,*,#110791,.T.); +#110791 = EDGE_CURVE('',#110784,#110736,#110792,.T.); +#110792 = LINE('',#110793,#110794); +#110793 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#110794 = VECTOR('',#110795,1.); +#110795 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110796 = FACE_BOUND('',#110797,.F.); +#110797 = EDGE_LOOP('',(#110798,#110808,#110816,#110824,#110832,#110840, + #110848,#110856)); +#110798 = ORIENTED_EDGE('',*,*,#110799,.F.); +#110799 = EDGE_CURVE('',#110800,#110802,#110804,.T.); +#110800 = VERTEX_POINT('',#110801); +#110801 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110802 = VERTEX_POINT('',#110803); +#110803 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#110804 = LINE('',#110805,#110806); +#110805 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110806 = VECTOR('',#110807,1.); +#110807 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110808 = ORIENTED_EDGE('',*,*,#110809,.T.); +#110809 = EDGE_CURVE('',#110800,#110810,#110812,.T.); +#110810 = VERTEX_POINT('',#110811); +#110811 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#110812 = LINE('',#110813,#110814); +#110813 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110814 = VECTOR('',#110815,1.); +#110815 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110816 = ORIENTED_EDGE('',*,*,#110817,.F.); +#110817 = EDGE_CURVE('',#110818,#110810,#110820,.T.); +#110818 = VERTEX_POINT('',#110819); +#110819 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#110820 = LINE('',#110821,#110822); +#110821 = CARTESIAN_POINT('',(-0.1,-3.175,0.2)); +#110822 = VECTOR('',#110823,1.); +#110823 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110824 = ORIENTED_EDGE('',*,*,#110825,.T.); +#110825 = EDGE_CURVE('',#110818,#110826,#110828,.T.); +#110826 = VERTEX_POINT('',#110827); +#110827 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#110828 = LINE('',#110829,#110830); +#110829 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#110830 = VECTOR('',#110831,1.); +#110831 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110832 = ORIENTED_EDGE('',*,*,#110833,.T.); +#110833 = EDGE_CURVE('',#110826,#110834,#110836,.T.); +#110834 = VERTEX_POINT('',#110835); +#110835 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#110836 = LINE('',#110837,#110838); +#110837 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#110838 = VECTOR('',#110839,1.); +#110839 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110840 = ORIENTED_EDGE('',*,*,#110841,.T.); +#110841 = EDGE_CURVE('',#110834,#110842,#110844,.T.); +#110842 = VERTEX_POINT('',#110843); +#110843 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#110844 = LINE('',#110845,#110846); +#110845 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#110846 = VECTOR('',#110847,1.); +#110847 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110848 = ORIENTED_EDGE('',*,*,#110849,.T.); +#110849 = EDGE_CURVE('',#110842,#110850,#110852,.T.); +#110850 = VERTEX_POINT('',#110851); +#110851 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#110852 = LINE('',#110853,#110854); +#110853 = CARTESIAN_POINT('',(0.1,-3.175,0.2)); +#110854 = VECTOR('',#110855,1.); +#110855 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110856 = ORIENTED_EDGE('',*,*,#110857,.T.); +#110857 = EDGE_CURVE('',#110850,#110802,#110858,.T.); +#110858 = LINE('',#110859,#110860); +#110859 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#110860 = VECTOR('',#110861,1.); +#110861 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110862 = PLANE('',#110863); +#110863 = AXIS2_PLACEMENT_3D('',#110864,#110865,#110866); +#110864 = CARTESIAN_POINT('',(-6.772360450213E-16,-6.35,0.2)); +#110865 = DIRECTION('',(0.,0.,1.)); +#110866 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#110867 = ADVANCED_FACE('',(#110868),#110874,.T.); +#110868 = FACE_BOUND('',#110869,.T.); +#110869 = EDGE_LOOP('',(#110870,#110871,#110872,#110873)); +#110870 = ORIENTED_EDGE('',*,*,#110088,.T.); +#110871 = ORIENTED_EDGE('',*,*,#110458,.T.); +#110872 = ORIENTED_EDGE('',*,*,#110167,.F.); +#110873 = ORIENTED_EDGE('',*,*,#110184,.F.); +#110874 = PLANE('',#110875); +#110875 = AXIS2_PLACEMENT_3D('',#110876,#110877,#110878); +#110876 = CARTESIAN_POINT('',(0.846666666667,-13.97,0.)); +#110877 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110878 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110879 = ADVANCED_FACE('',(#110880),#110886,.F.); +#110880 = FACE_BOUND('',#110881,.F.); +#110881 = EDGE_LOOP('',(#110882,#110883,#110884,#110885)); +#110882 = ORIENTED_EDGE('',*,*,#110135,.T.); +#110883 = ORIENTED_EDGE('',*,*,#110200,.T.); +#110884 = ORIENTED_EDGE('',*,*,#110065,.F.); +#110885 = ORIENTED_EDGE('',*,*,#110427,.F.); +#110886 = PLANE('',#110887); +#110887 = AXIS2_PLACEMENT_3D('',#110888,#110889,#110890); +#110888 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#110889 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110890 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110891 = ADVANCED_FACE('',(#110892),#110917,.T.); +#110892 = FACE_BOUND('',#110893,.T.); +#110893 = EDGE_LOOP('',(#110894,#110902,#110903,#110911)); +#110894 = ORIENTED_EDGE('',*,*,#110895,.F.); +#110895 = EDGE_CURVE('',#110210,#110896,#110898,.T.); +#110896 = VERTEX_POINT('',#110897); +#110897 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#110898 = LINE('',#110899,#110900); +#110899 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#110900 = VECTOR('',#110901,1.); +#110901 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#110902 = ORIENTED_EDGE('',*,*,#110209,.T.); +#110903 = ORIENTED_EDGE('',*,*,#110904,.T.); +#110904 = EDGE_CURVE('',#110212,#110905,#110907,.T.); +#110905 = VERTEX_POINT('',#110906); +#110906 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#110907 = LINE('',#110908,#110909); +#110908 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#110909 = VECTOR('',#110910,1.); +#110910 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#110911 = ORIENTED_EDGE('',*,*,#110912,.F.); +#110912 = EDGE_CURVE('',#110896,#110905,#110913,.T.); +#110913 = LINE('',#110914,#110915); +#110914 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#110915 = VECTOR('',#110916,1.); +#110916 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#110917 = PLANE('',#110918); +#110918 = AXIS2_PLACEMENT_3D('',#110919,#110920,#110921); +#110919 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#110920 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#110921 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#110922 = ADVANCED_FACE('',(#110923),#110941,.T.); +#110923 = FACE_BOUND('',#110924,.T.); +#110924 = EDGE_LOOP('',(#110925,#110926,#110927,#110935)); +#110925 = ORIENTED_EDGE('',*,*,#110904,.F.); +#110926 = ORIENTED_EDGE('',*,*,#110235,.T.); +#110927 = ORIENTED_EDGE('',*,*,#110928,.T.); +#110928 = EDGE_CURVE('',#110228,#110929,#110931,.T.); +#110929 = VERTEX_POINT('',#110930); +#110930 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#110931 = LINE('',#110932,#110933); +#110932 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#110933 = VECTOR('',#110934,1.); +#110934 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#110935 = ORIENTED_EDGE('',*,*,#110936,.F.); +#110936 = EDGE_CURVE('',#110905,#110929,#110937,.T.); +#110937 = LINE('',#110938,#110939); +#110938 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#110939 = VECTOR('',#110940,1.); +#110940 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#110941 = PLANE('',#110942); +#110942 = AXIS2_PLACEMENT_3D('',#110943,#110944,#110945); +#110943 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#110944 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#110945 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#110946 = ADVANCED_FACE('',(#110947),#110965,.T.); +#110947 = FACE_BOUND('',#110948,.T.); +#110948 = EDGE_LOOP('',(#110949,#110950,#110951,#110959)); +#110949 = ORIENTED_EDGE('',*,*,#110928,.F.); +#110950 = ORIENTED_EDGE('',*,*,#110227,.T.); +#110951 = ORIENTED_EDGE('',*,*,#110952,.T.); +#110952 = EDGE_CURVE('',#110220,#110953,#110955,.T.); +#110953 = VERTEX_POINT('',#110954); +#110954 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#110955 = LINE('',#110956,#110957); +#110956 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#110957 = VECTOR('',#110958,1.); +#110958 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#110959 = ORIENTED_EDGE('',*,*,#110960,.F.); +#110960 = EDGE_CURVE('',#110929,#110953,#110961,.T.); +#110961 = LINE('',#110962,#110963); +#110962 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#110963 = VECTOR('',#110964,1.); +#110964 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#110965 = PLANE('',#110966); +#110966 = AXIS2_PLACEMENT_3D('',#110967,#110968,#110969); +#110967 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#110968 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#110969 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#110970 = ADVANCED_FACE('',(#110971),#110982,.T.); +#110971 = FACE_BOUND('',#110972,.T.); +#110972 = EDGE_LOOP('',(#110973,#110974,#110975,#110976)); +#110973 = ORIENTED_EDGE('',*,*,#110952,.F.); +#110974 = ORIENTED_EDGE('',*,*,#110219,.T.); +#110975 = ORIENTED_EDGE('',*,*,#110895,.T.); +#110976 = ORIENTED_EDGE('',*,*,#110977,.F.); +#110977 = EDGE_CURVE('',#110953,#110896,#110978,.T.); +#110978 = LINE('',#110979,#110980); +#110979 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#110980 = VECTOR('',#110981,1.); +#110981 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#110982 = PLANE('',#110983); +#110983 = AXIS2_PLACEMENT_3D('',#110984,#110985,#110986); +#110984 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#110985 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#110986 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#110987 = ADVANCED_FACE('',(#110988),#111013,.T.); +#110988 = FACE_BOUND('',#110989,.T.); +#110989 = EDGE_LOOP('',(#110990,#110998,#110999,#111007)); +#110990 = ORIENTED_EDGE('',*,*,#110991,.F.); +#110991 = EDGE_CURVE('',#110244,#110992,#110994,.T.); +#110992 = VERTEX_POINT('',#110993); +#110993 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#110994 = LINE('',#110995,#110996); +#110995 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#110996 = VECTOR('',#110997,1.); +#110997 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#110998 = ORIENTED_EDGE('',*,*,#110243,.T.); +#110999 = ORIENTED_EDGE('',*,*,#111000,.T.); +#111000 = EDGE_CURVE('',#110246,#111001,#111003,.T.); +#111001 = VERTEX_POINT('',#111002); +#111002 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#111003 = LINE('',#111004,#111005); +#111004 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#111005 = VECTOR('',#111006,1.); +#111006 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111007 = ORIENTED_EDGE('',*,*,#111008,.F.); +#111008 = EDGE_CURVE('',#110992,#111001,#111009,.T.); +#111009 = LINE('',#111010,#111011); +#111010 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#111011 = VECTOR('',#111012,1.); +#111012 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111013 = PLANE('',#111014); +#111014 = AXIS2_PLACEMENT_3D('',#111015,#111016,#111017); +#111015 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#111016 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111017 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111018 = ADVANCED_FACE('',(#111019),#111037,.T.); +#111019 = FACE_BOUND('',#111020,.T.); +#111020 = EDGE_LOOP('',(#111021,#111022,#111023,#111031)); +#111021 = ORIENTED_EDGE('',*,*,#111000,.F.); +#111022 = ORIENTED_EDGE('',*,*,#110269,.T.); +#111023 = ORIENTED_EDGE('',*,*,#111024,.T.); +#111024 = EDGE_CURVE('',#110262,#111025,#111027,.T.); +#111025 = VERTEX_POINT('',#111026); +#111026 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#111027 = LINE('',#111028,#111029); +#111028 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#111029 = VECTOR('',#111030,1.); +#111030 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111031 = ORIENTED_EDGE('',*,*,#111032,.F.); +#111032 = EDGE_CURVE('',#111001,#111025,#111033,.T.); +#111033 = LINE('',#111034,#111035); +#111034 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#111035 = VECTOR('',#111036,1.); +#111036 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111037 = PLANE('',#111038); +#111038 = AXIS2_PLACEMENT_3D('',#111039,#111040,#111041); +#111039 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#111040 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111041 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111042 = ADVANCED_FACE('',(#111043),#111061,.T.); +#111043 = FACE_BOUND('',#111044,.T.); +#111044 = EDGE_LOOP('',(#111045,#111046,#111047,#111055)); +#111045 = ORIENTED_EDGE('',*,*,#111024,.F.); +#111046 = ORIENTED_EDGE('',*,*,#110261,.T.); +#111047 = ORIENTED_EDGE('',*,*,#111048,.T.); +#111048 = EDGE_CURVE('',#110254,#111049,#111051,.T.); +#111049 = VERTEX_POINT('',#111050); +#111050 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#111051 = LINE('',#111052,#111053); +#111052 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#111053 = VECTOR('',#111054,1.); +#111054 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111055 = ORIENTED_EDGE('',*,*,#111056,.F.); +#111056 = EDGE_CURVE('',#111025,#111049,#111057,.T.); +#111057 = LINE('',#111058,#111059); +#111058 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#111059 = VECTOR('',#111060,1.); +#111060 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111061 = PLANE('',#111062); +#111062 = AXIS2_PLACEMENT_3D('',#111063,#111064,#111065); +#111063 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#111064 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111065 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111066 = ADVANCED_FACE('',(#111067),#111078,.T.); +#111067 = FACE_BOUND('',#111068,.T.); +#111068 = EDGE_LOOP('',(#111069,#111070,#111071,#111072)); +#111069 = ORIENTED_EDGE('',*,*,#111048,.F.); +#111070 = ORIENTED_EDGE('',*,*,#110253,.T.); +#111071 = ORIENTED_EDGE('',*,*,#110991,.T.); +#111072 = ORIENTED_EDGE('',*,*,#111073,.F.); +#111073 = EDGE_CURVE('',#111049,#110992,#111074,.T.); +#111074 = LINE('',#111075,#111076); +#111075 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#111076 = VECTOR('',#111077,1.); +#111077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111078 = PLANE('',#111079); +#111079 = AXIS2_PLACEMENT_3D('',#111080,#111081,#111082); +#111080 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#111081 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111082 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111083 = ADVANCED_FACE('',(#111084),#111109,.T.); +#111084 = FACE_BOUND('',#111085,.T.); +#111085 = EDGE_LOOP('',(#111086,#111094,#111095,#111103)); +#111086 = ORIENTED_EDGE('',*,*,#111087,.F.); +#111087 = EDGE_CURVE('',#110278,#111088,#111090,.T.); +#111088 = VERTEX_POINT('',#111089); +#111089 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#111090 = LINE('',#111091,#111092); +#111091 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#111092 = VECTOR('',#111093,1.); +#111093 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111094 = ORIENTED_EDGE('',*,*,#110277,.T.); +#111095 = ORIENTED_EDGE('',*,*,#111096,.T.); +#111096 = EDGE_CURVE('',#110280,#111097,#111099,.T.); +#111097 = VERTEX_POINT('',#111098); +#111098 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#111099 = LINE('',#111100,#111101); +#111100 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#111101 = VECTOR('',#111102,1.); +#111102 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111103 = ORIENTED_EDGE('',*,*,#111104,.F.); +#111104 = EDGE_CURVE('',#111088,#111097,#111105,.T.); +#111105 = LINE('',#111106,#111107); +#111106 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#111107 = VECTOR('',#111108,1.); +#111108 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111109 = PLANE('',#111110); +#111110 = AXIS2_PLACEMENT_3D('',#111111,#111112,#111113); +#111111 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#111112 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111113 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111114 = ADVANCED_FACE('',(#111115),#111133,.T.); +#111115 = FACE_BOUND('',#111116,.T.); +#111116 = EDGE_LOOP('',(#111117,#111118,#111119,#111127)); +#111117 = ORIENTED_EDGE('',*,*,#111096,.F.); +#111118 = ORIENTED_EDGE('',*,*,#110303,.T.); +#111119 = ORIENTED_EDGE('',*,*,#111120,.T.); +#111120 = EDGE_CURVE('',#110296,#111121,#111123,.T.); +#111121 = VERTEX_POINT('',#111122); +#111122 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#111123 = LINE('',#111124,#111125); +#111124 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#111125 = VECTOR('',#111126,1.); +#111126 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111127 = ORIENTED_EDGE('',*,*,#111128,.F.); +#111128 = EDGE_CURVE('',#111097,#111121,#111129,.T.); +#111129 = LINE('',#111130,#111131); +#111130 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#111131 = VECTOR('',#111132,1.); +#111132 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111133 = PLANE('',#111134); +#111134 = AXIS2_PLACEMENT_3D('',#111135,#111136,#111137); +#111135 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#111136 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111137 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111138 = ADVANCED_FACE('',(#111139),#111157,.T.); +#111139 = FACE_BOUND('',#111140,.T.); +#111140 = EDGE_LOOP('',(#111141,#111142,#111143,#111151)); +#111141 = ORIENTED_EDGE('',*,*,#111120,.F.); +#111142 = ORIENTED_EDGE('',*,*,#110295,.T.); +#111143 = ORIENTED_EDGE('',*,*,#111144,.T.); +#111144 = EDGE_CURVE('',#110288,#111145,#111147,.T.); +#111145 = VERTEX_POINT('',#111146); +#111146 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#111147 = LINE('',#111148,#111149); +#111148 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#111149 = VECTOR('',#111150,1.); +#111150 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111151 = ORIENTED_EDGE('',*,*,#111152,.F.); +#111152 = EDGE_CURVE('',#111121,#111145,#111153,.T.); +#111153 = LINE('',#111154,#111155); +#111154 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#111155 = VECTOR('',#111156,1.); +#111156 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111157 = PLANE('',#111158); +#111158 = AXIS2_PLACEMENT_3D('',#111159,#111160,#111161); +#111159 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#111160 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111161 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111162 = ADVANCED_FACE('',(#111163),#111174,.T.); +#111163 = FACE_BOUND('',#111164,.T.); +#111164 = EDGE_LOOP('',(#111165,#111166,#111167,#111168)); +#111165 = ORIENTED_EDGE('',*,*,#111144,.F.); +#111166 = ORIENTED_EDGE('',*,*,#110287,.T.); +#111167 = ORIENTED_EDGE('',*,*,#111087,.T.); +#111168 = ORIENTED_EDGE('',*,*,#111169,.F.); +#111169 = EDGE_CURVE('',#111145,#111088,#111170,.T.); +#111170 = LINE('',#111171,#111172); +#111171 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#111172 = VECTOR('',#111173,1.); +#111173 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111174 = PLANE('',#111175); +#111175 = AXIS2_PLACEMENT_3D('',#111176,#111177,#111178); +#111176 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#111177 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111178 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111179 = ADVANCED_FACE('',(#111180),#111205,.T.); +#111180 = FACE_BOUND('',#111181,.T.); +#111181 = EDGE_LOOP('',(#111182,#111190,#111191,#111199)); +#111182 = ORIENTED_EDGE('',*,*,#111183,.F.); +#111183 = EDGE_CURVE('',#110312,#111184,#111186,.T.); +#111184 = VERTEX_POINT('',#111185); +#111185 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#111186 = LINE('',#111187,#111188); +#111187 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#111188 = VECTOR('',#111189,1.); +#111189 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111190 = ORIENTED_EDGE('',*,*,#110311,.T.); +#111191 = ORIENTED_EDGE('',*,*,#111192,.T.); +#111192 = EDGE_CURVE('',#110314,#111193,#111195,.T.); +#111193 = VERTEX_POINT('',#111194); +#111194 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#111195 = LINE('',#111196,#111197); +#111196 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#111197 = VECTOR('',#111198,1.); +#111198 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111199 = ORIENTED_EDGE('',*,*,#111200,.F.); +#111200 = EDGE_CURVE('',#111184,#111193,#111201,.T.); +#111201 = LINE('',#111202,#111203); +#111202 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#111203 = VECTOR('',#111204,1.); +#111204 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111205 = PLANE('',#111206); +#111206 = AXIS2_PLACEMENT_3D('',#111207,#111208,#111209); +#111207 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#111208 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111209 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111210 = ADVANCED_FACE('',(#111211),#111229,.T.); +#111211 = FACE_BOUND('',#111212,.T.); +#111212 = EDGE_LOOP('',(#111213,#111214,#111215,#111223)); +#111213 = ORIENTED_EDGE('',*,*,#111192,.F.); +#111214 = ORIENTED_EDGE('',*,*,#110337,.T.); +#111215 = ORIENTED_EDGE('',*,*,#111216,.T.); +#111216 = EDGE_CURVE('',#110330,#111217,#111219,.T.); +#111217 = VERTEX_POINT('',#111218); +#111218 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#111219 = LINE('',#111220,#111221); +#111220 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#111221 = VECTOR('',#111222,1.); +#111222 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111223 = ORIENTED_EDGE('',*,*,#111224,.F.); +#111224 = EDGE_CURVE('',#111193,#111217,#111225,.T.); +#111225 = LINE('',#111226,#111227); +#111226 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#111227 = VECTOR('',#111228,1.); +#111228 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111229 = PLANE('',#111230); +#111230 = AXIS2_PLACEMENT_3D('',#111231,#111232,#111233); +#111231 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#111232 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111233 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111234 = ADVANCED_FACE('',(#111235),#111253,.T.); +#111235 = FACE_BOUND('',#111236,.T.); +#111236 = EDGE_LOOP('',(#111237,#111238,#111239,#111247)); +#111237 = ORIENTED_EDGE('',*,*,#111216,.F.); +#111238 = ORIENTED_EDGE('',*,*,#110329,.T.); +#111239 = ORIENTED_EDGE('',*,*,#111240,.T.); +#111240 = EDGE_CURVE('',#110322,#111241,#111243,.T.); +#111241 = VERTEX_POINT('',#111242); +#111242 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#111243 = LINE('',#111244,#111245); +#111244 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#111245 = VECTOR('',#111246,1.); +#111246 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111247 = ORIENTED_EDGE('',*,*,#111248,.F.); +#111248 = EDGE_CURVE('',#111217,#111241,#111249,.T.); +#111249 = LINE('',#111250,#111251); +#111250 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#111251 = VECTOR('',#111252,1.); +#111252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111253 = PLANE('',#111254); +#111254 = AXIS2_PLACEMENT_3D('',#111255,#111256,#111257); +#111255 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#111256 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111257 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111258 = ADVANCED_FACE('',(#111259),#111270,.T.); +#111259 = FACE_BOUND('',#111260,.T.); +#111260 = EDGE_LOOP('',(#111261,#111262,#111263,#111264)); +#111261 = ORIENTED_EDGE('',*,*,#111240,.F.); +#111262 = ORIENTED_EDGE('',*,*,#110321,.T.); +#111263 = ORIENTED_EDGE('',*,*,#111183,.T.); +#111264 = ORIENTED_EDGE('',*,*,#111265,.F.); +#111265 = EDGE_CURVE('',#111241,#111184,#111266,.T.); +#111266 = LINE('',#111267,#111268); +#111267 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#111268 = VECTOR('',#111269,1.); +#111269 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111270 = PLANE('',#111271); +#111271 = AXIS2_PLACEMENT_3D('',#111272,#111273,#111274); +#111272 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#111273 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111274 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111275 = ADVANCED_FACE('',(#111276),#111301,.T.); +#111276 = FACE_BOUND('',#111277,.T.); +#111277 = EDGE_LOOP('',(#111278,#111286,#111287,#111295)); +#111278 = ORIENTED_EDGE('',*,*,#111279,.F.); +#111279 = EDGE_CURVE('',#110346,#111280,#111282,.T.); +#111280 = VERTEX_POINT('',#111281); +#111281 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#111282 = LINE('',#111283,#111284); +#111283 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#111284 = VECTOR('',#111285,1.); +#111285 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111286 = ORIENTED_EDGE('',*,*,#110345,.T.); +#111287 = ORIENTED_EDGE('',*,*,#111288,.T.); +#111288 = EDGE_CURVE('',#110348,#111289,#111291,.T.); +#111289 = VERTEX_POINT('',#111290); +#111290 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#111291 = LINE('',#111292,#111293); +#111292 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#111293 = VECTOR('',#111294,1.); +#111294 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111295 = ORIENTED_EDGE('',*,*,#111296,.F.); +#111296 = EDGE_CURVE('',#111280,#111289,#111297,.T.); +#111297 = LINE('',#111298,#111299); +#111298 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#111299 = VECTOR('',#111300,1.); +#111300 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111301 = PLANE('',#111302); +#111302 = AXIS2_PLACEMENT_3D('',#111303,#111304,#111305); +#111303 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#111304 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111305 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111306 = ADVANCED_FACE('',(#111307),#111325,.T.); +#111307 = FACE_BOUND('',#111308,.T.); +#111308 = EDGE_LOOP('',(#111309,#111310,#111311,#111319)); +#111309 = ORIENTED_EDGE('',*,*,#111288,.F.); +#111310 = ORIENTED_EDGE('',*,*,#110371,.T.); +#111311 = ORIENTED_EDGE('',*,*,#111312,.T.); +#111312 = EDGE_CURVE('',#110364,#111313,#111315,.T.); +#111313 = VERTEX_POINT('',#111314); +#111314 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#111315 = LINE('',#111316,#111317); +#111316 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#111317 = VECTOR('',#111318,1.); +#111318 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111319 = ORIENTED_EDGE('',*,*,#111320,.F.); +#111320 = EDGE_CURVE('',#111289,#111313,#111321,.T.); +#111321 = LINE('',#111322,#111323); +#111322 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#111323 = VECTOR('',#111324,1.); +#111324 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111325 = PLANE('',#111326); +#111326 = AXIS2_PLACEMENT_3D('',#111327,#111328,#111329); +#111327 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#111328 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111329 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111330 = ADVANCED_FACE('',(#111331),#111349,.T.); +#111331 = FACE_BOUND('',#111332,.T.); +#111332 = EDGE_LOOP('',(#111333,#111334,#111335,#111343)); +#111333 = ORIENTED_EDGE('',*,*,#111312,.F.); +#111334 = ORIENTED_EDGE('',*,*,#110363,.T.); +#111335 = ORIENTED_EDGE('',*,*,#111336,.T.); +#111336 = EDGE_CURVE('',#110356,#111337,#111339,.T.); +#111337 = VERTEX_POINT('',#111338); +#111338 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#111339 = LINE('',#111340,#111341); +#111340 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#111341 = VECTOR('',#111342,1.); +#111342 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111343 = ORIENTED_EDGE('',*,*,#111344,.F.); +#111344 = EDGE_CURVE('',#111313,#111337,#111345,.T.); +#111345 = LINE('',#111346,#111347); +#111346 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#111347 = VECTOR('',#111348,1.); +#111348 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111349 = PLANE('',#111350); +#111350 = AXIS2_PLACEMENT_3D('',#111351,#111352,#111353); +#111351 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#111352 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111353 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111354 = ADVANCED_FACE('',(#111355),#111366,.T.); +#111355 = FACE_BOUND('',#111356,.T.); +#111356 = EDGE_LOOP('',(#111357,#111358,#111359,#111360)); +#111357 = ORIENTED_EDGE('',*,*,#111336,.F.); +#111358 = ORIENTED_EDGE('',*,*,#110355,.T.); +#111359 = ORIENTED_EDGE('',*,*,#111279,.T.); +#111360 = ORIENTED_EDGE('',*,*,#111361,.F.); +#111361 = EDGE_CURVE('',#111337,#111280,#111362,.T.); +#111362 = LINE('',#111363,#111364); +#111363 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#111364 = VECTOR('',#111365,1.); +#111365 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111366 = PLANE('',#111367); +#111367 = AXIS2_PLACEMENT_3D('',#111368,#111369,#111370); +#111368 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#111369 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111370 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111371 = ADVANCED_FACE('',(#111372),#111397,.T.); +#111372 = FACE_BOUND('',#111373,.T.); +#111373 = EDGE_LOOP('',(#111374,#111382,#111383,#111391)); +#111374 = ORIENTED_EDGE('',*,*,#111375,.F.); +#111375 = EDGE_CURVE('',#110380,#111376,#111378,.T.); +#111376 = VERTEX_POINT('',#111377); +#111377 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#111378 = LINE('',#111379,#111380); +#111379 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#111380 = VECTOR('',#111381,1.); +#111381 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#111382 = ORIENTED_EDGE('',*,*,#110379,.T.); +#111383 = ORIENTED_EDGE('',*,*,#111384,.T.); +#111384 = EDGE_CURVE('',#110382,#111385,#111387,.T.); +#111385 = VERTEX_POINT('',#111386); +#111386 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#111387 = LINE('',#111388,#111389); +#111388 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#111389 = VECTOR('',#111390,1.); +#111390 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#111391 = ORIENTED_EDGE('',*,*,#111392,.F.); +#111392 = EDGE_CURVE('',#111376,#111385,#111393,.T.); +#111393 = LINE('',#111394,#111395); +#111394 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#111395 = VECTOR('',#111396,1.); +#111396 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111397 = PLANE('',#111398); +#111398 = AXIS2_PLACEMENT_3D('',#111399,#111400,#111401); +#111399 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#111400 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#111401 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#111402 = ADVANCED_FACE('',(#111403),#111421,.T.); +#111403 = FACE_BOUND('',#111404,.T.); +#111404 = EDGE_LOOP('',(#111405,#111406,#111407,#111415)); +#111405 = ORIENTED_EDGE('',*,*,#111384,.F.); +#111406 = ORIENTED_EDGE('',*,*,#110405,.T.); +#111407 = ORIENTED_EDGE('',*,*,#111408,.T.); +#111408 = EDGE_CURVE('',#110398,#111409,#111411,.T.); +#111409 = VERTEX_POINT('',#111410); +#111410 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#111411 = LINE('',#111412,#111413); +#111412 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#111413 = VECTOR('',#111414,1.); +#111414 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#111415 = ORIENTED_EDGE('',*,*,#111416,.F.); +#111416 = EDGE_CURVE('',#111385,#111409,#111417,.T.); +#111417 = LINE('',#111418,#111419); +#111418 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#111419 = VECTOR('',#111420,1.); +#111420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111421 = PLANE('',#111422); +#111422 = AXIS2_PLACEMENT_3D('',#111423,#111424,#111425); +#111423 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#111424 = DIRECTION('',(-8.197719098449E-17,-0.707106781187, + 0.707106781187)); +#111425 = DIRECTION('',(-1.,1.13477778879E-16,-2.455476416522E-18)); +#111426 = ADVANCED_FACE('',(#111427),#111445,.T.); +#111427 = FACE_BOUND('',#111428,.T.); +#111428 = EDGE_LOOP('',(#111429,#111430,#111431,#111439)); +#111429 = ORIENTED_EDGE('',*,*,#111408,.F.); +#111430 = ORIENTED_EDGE('',*,*,#110397,.T.); +#111431 = ORIENTED_EDGE('',*,*,#111432,.T.); +#111432 = EDGE_CURVE('',#110390,#111433,#111435,.T.); +#111433 = VERTEX_POINT('',#111434); +#111434 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#111435 = LINE('',#111436,#111437); +#111436 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#111437 = VECTOR('',#111438,1.); +#111438 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#111439 = ORIENTED_EDGE('',*,*,#111440,.F.); +#111440 = EDGE_CURVE('',#111409,#111433,#111441,.T.); +#111441 = LINE('',#111442,#111443); +#111442 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#111443 = VECTOR('',#111444,1.); +#111444 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111445 = PLANE('',#111446); +#111446 = AXIS2_PLACEMENT_3D('',#111447,#111448,#111449); +#111447 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#111448 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#111449 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#111450 = ADVANCED_FACE('',(#111451),#111462,.T.); +#111451 = FACE_BOUND('',#111452,.T.); +#111452 = EDGE_LOOP('',(#111453,#111454,#111455,#111456)); +#111453 = ORIENTED_EDGE('',*,*,#111432,.F.); +#111454 = ORIENTED_EDGE('',*,*,#110389,.T.); +#111455 = ORIENTED_EDGE('',*,*,#111375,.T.); +#111456 = ORIENTED_EDGE('',*,*,#111457,.F.); +#111457 = EDGE_CURVE('',#111433,#111376,#111458,.T.); +#111458 = LINE('',#111459,#111460); +#111459 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#111460 = VECTOR('',#111461,1.); +#111461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111462 = PLANE('',#111463); +#111463 = AXIS2_PLACEMENT_3D('',#111464,#111465,#111466); +#111464 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#111465 = DIRECTION('',(8.197719098449E-17,0.707106781187,0.707106781187 + )); +#111466 = DIRECTION('',(1.,-1.13477778879E-16,-2.455476416522E-18)); +#111467 = ADVANCED_FACE('',(#111468),#111479,.T.); +#111468 = FACE_BOUND('',#111469,.T.); +#111469 = EDGE_LOOP('',(#111470,#111471,#111472,#111478)); +#111470 = ORIENTED_EDGE('',*,*,#110469,.F.); +#111471 = ORIENTED_EDGE('',*,*,#110479,.T.); +#111472 = ORIENTED_EDGE('',*,*,#111473,.T.); +#111473 = EDGE_CURVE('',#110480,#110520,#111474,.T.); +#111474 = LINE('',#111475,#111476); +#111475 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#111476 = VECTOR('',#111477,1.); +#111477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111478 = ORIENTED_EDGE('',*,*,#110527,.T.); +#111479 = PLANE('',#111480); +#111480 = AXIS2_PLACEMENT_3D('',#111481,#111482,#111483); +#111481 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#111482 = DIRECTION('',(0.,-0.,-1.)); +#111483 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111484 = ADVANCED_FACE('',(#111485),#111526,.F.); +#111485 = FACE_BOUND('',#111486,.F.); +#111486 = EDGE_LOOP('',(#111487,#111495,#111496,#111504,#111512,#111520) + ); +#111487 = ORIENTED_EDGE('',*,*,#111488,.T.); +#111488 = EDGE_CURVE('',#111489,#110520,#111491,.T.); +#111489 = VERTEX_POINT('',#111490); +#111490 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#111491 = LINE('',#111492,#111493); +#111492 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#111493 = VECTOR('',#111494,1.); +#111494 = DIRECTION('',(0.,0.,1.)); +#111495 = ORIENTED_EDGE('',*,*,#110519,.F.); +#111496 = ORIENTED_EDGE('',*,*,#111497,.T.); +#111497 = EDGE_CURVE('',#110512,#111498,#111500,.T.); +#111498 = VERTEX_POINT('',#111499); +#111499 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#111500 = LINE('',#111501,#111502); +#111501 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#111502 = VECTOR('',#111503,1.); +#111503 = DIRECTION('',(0.,0.,-1.)); +#111504 = ORIENTED_EDGE('',*,*,#111505,.T.); +#111505 = EDGE_CURVE('',#111498,#111506,#111508,.T.); +#111506 = VERTEX_POINT('',#111507); +#111507 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#111508 = LINE('',#111509,#111510); +#111509 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#111510 = VECTOR('',#111511,1.); +#111511 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111512 = ORIENTED_EDGE('',*,*,#111513,.T.); +#111513 = EDGE_CURVE('',#111506,#111514,#111516,.T.); +#111514 = VERTEX_POINT('',#111515); +#111515 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#111516 = LINE('',#111517,#111518); +#111517 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#111518 = VECTOR('',#111519,1.); +#111519 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111520 = ORIENTED_EDGE('',*,*,#111521,.T.); +#111521 = EDGE_CURVE('',#111514,#111489,#111522,.T.); +#111522 = LINE('',#111523,#111524); +#111523 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#111524 = VECTOR('',#111525,1.); +#111525 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111526 = PLANE('',#111527); +#111527 = AXIS2_PLACEMENT_3D('',#111528,#111529,#111530); +#111528 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#111529 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111530 = DIRECTION('',(0.,0.,1.)); +#111531 = ADVANCED_FACE('',(#111532),#111543,.T.); +#111532 = FACE_BOUND('',#111533,.T.); +#111533 = EDGE_LOOP('',(#111534,#111540,#111541,#111542)); +#111534 = ORIENTED_EDGE('',*,*,#111535,.F.); +#111535 = EDGE_CURVE('',#110488,#110512,#111536,.T.); +#111536 = LINE('',#111537,#111538); +#111537 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#111538 = VECTOR('',#111539,1.); +#111539 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111540 = ORIENTED_EDGE('',*,*,#110495,.T.); +#111541 = ORIENTED_EDGE('',*,*,#110503,.T.); +#111542 = ORIENTED_EDGE('',*,*,#110511,.T.); +#111543 = PLANE('',#111544); +#111544 = AXIS2_PLACEMENT_3D('',#111545,#111546,#111547); +#111545 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#111546 = DIRECTION('',(0.,-0.,-1.)); +#111547 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111548 = ADVANCED_FACE('',(#111549),#111590,.T.); +#111549 = FACE_BOUND('',#111550,.T.); +#111550 = EDGE_LOOP('',(#111551,#111559,#111560,#111568,#111576,#111584) + ); +#111551 = ORIENTED_EDGE('',*,*,#111552,.T.); +#111552 = EDGE_CURVE('',#111553,#110480,#111555,.T.); +#111553 = VERTEX_POINT('',#111554); +#111554 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#111555 = LINE('',#111556,#111557); +#111556 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#111557 = VECTOR('',#111558,1.); +#111558 = DIRECTION('',(0.,0.,1.)); +#111559 = ORIENTED_EDGE('',*,*,#110487,.F.); +#111560 = ORIENTED_EDGE('',*,*,#111561,.T.); +#111561 = EDGE_CURVE('',#110488,#111562,#111564,.T.); +#111562 = VERTEX_POINT('',#111563); +#111563 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#111564 = LINE('',#111565,#111566); +#111565 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#111566 = VECTOR('',#111567,1.); +#111567 = DIRECTION('',(0.,0.,-1.)); +#111568 = ORIENTED_EDGE('',*,*,#111569,.T.); +#111569 = EDGE_CURVE('',#111562,#111570,#111572,.T.); +#111570 = VERTEX_POINT('',#111571); +#111571 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#111572 = LINE('',#111573,#111574); +#111573 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#111574 = VECTOR('',#111575,1.); +#111575 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111576 = ORIENTED_EDGE('',*,*,#111577,.F.); +#111577 = EDGE_CURVE('',#111578,#111570,#111580,.T.); +#111578 = VERTEX_POINT('',#111579); +#111579 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#111580 = LINE('',#111581,#111582); +#111581 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#111582 = VECTOR('',#111583,1.); +#111583 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111584 = ORIENTED_EDGE('',*,*,#111585,.T.); +#111585 = EDGE_CURVE('',#111578,#111553,#111586,.T.); +#111586 = LINE('',#111587,#111588); +#111587 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#111588 = VECTOR('',#111589,1.); +#111589 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111590 = PLANE('',#111591); +#111591 = AXIS2_PLACEMENT_3D('',#111592,#111593,#111594); +#111592 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#111593 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111594 = DIRECTION('',(0.,0.,1.)); +#111595 = ADVANCED_FACE('',(#111596),#111607,.T.); +#111596 = FACE_BOUND('',#111597,.T.); +#111597 = EDGE_LOOP('',(#111598,#111599,#111600,#111606)); +#111598 = ORIENTED_EDGE('',*,*,#110535,.F.); +#111599 = ORIENTED_EDGE('',*,*,#110545,.T.); +#111600 = ORIENTED_EDGE('',*,*,#111601,.T.); +#111601 = EDGE_CURVE('',#110546,#110586,#111602,.T.); +#111602 = LINE('',#111603,#111604); +#111603 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#111604 = VECTOR('',#111605,1.); +#111605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111606 = ORIENTED_EDGE('',*,*,#110593,.T.); +#111607 = PLANE('',#111608); +#111608 = AXIS2_PLACEMENT_3D('',#111609,#111610,#111611); +#111609 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#111610 = DIRECTION('',(0.,-0.,-1.)); +#111611 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111612 = ADVANCED_FACE('',(#111613),#111654,.F.); +#111613 = FACE_BOUND('',#111614,.F.); +#111614 = EDGE_LOOP('',(#111615,#111623,#111624,#111632,#111640,#111648) + ); +#111615 = ORIENTED_EDGE('',*,*,#111616,.T.); +#111616 = EDGE_CURVE('',#111617,#110586,#111619,.T.); +#111617 = VERTEX_POINT('',#111618); +#111618 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#111619 = LINE('',#111620,#111621); +#111620 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#111621 = VECTOR('',#111622,1.); +#111622 = DIRECTION('',(0.,0.,1.)); +#111623 = ORIENTED_EDGE('',*,*,#110585,.F.); +#111624 = ORIENTED_EDGE('',*,*,#111625,.T.); +#111625 = EDGE_CURVE('',#110578,#111626,#111628,.T.); +#111626 = VERTEX_POINT('',#111627); +#111627 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#111628 = LINE('',#111629,#111630); +#111629 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#111630 = VECTOR('',#111631,1.); +#111631 = DIRECTION('',(0.,0.,-1.)); +#111632 = ORIENTED_EDGE('',*,*,#111633,.T.); +#111633 = EDGE_CURVE('',#111626,#111634,#111636,.T.); +#111634 = VERTEX_POINT('',#111635); +#111635 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#111636 = LINE('',#111637,#111638); +#111637 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#111638 = VECTOR('',#111639,1.); +#111639 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111640 = ORIENTED_EDGE('',*,*,#111641,.T.); +#111641 = EDGE_CURVE('',#111634,#111642,#111644,.T.); +#111642 = VERTEX_POINT('',#111643); +#111643 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#111644 = LINE('',#111645,#111646); +#111645 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#111646 = VECTOR('',#111647,1.); +#111647 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111648 = ORIENTED_EDGE('',*,*,#111649,.T.); +#111649 = EDGE_CURVE('',#111642,#111617,#111650,.T.); +#111650 = LINE('',#111651,#111652); +#111651 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#111652 = VECTOR('',#111653,1.); +#111653 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111654 = PLANE('',#111655); +#111655 = AXIS2_PLACEMENT_3D('',#111656,#111657,#111658); +#111656 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#111657 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111658 = DIRECTION('',(0.,0.,1.)); +#111659 = ADVANCED_FACE('',(#111660),#111671,.T.); +#111660 = FACE_BOUND('',#111661,.T.); +#111661 = EDGE_LOOP('',(#111662,#111668,#111669,#111670)); +#111662 = ORIENTED_EDGE('',*,*,#111663,.F.); +#111663 = EDGE_CURVE('',#110554,#110578,#111664,.T.); +#111664 = LINE('',#111665,#111666); +#111665 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#111666 = VECTOR('',#111667,1.); +#111667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111668 = ORIENTED_EDGE('',*,*,#110561,.T.); +#111669 = ORIENTED_EDGE('',*,*,#110569,.T.); +#111670 = ORIENTED_EDGE('',*,*,#110577,.T.); +#111671 = PLANE('',#111672); +#111672 = AXIS2_PLACEMENT_3D('',#111673,#111674,#111675); +#111673 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#111674 = DIRECTION('',(0.,-0.,-1.)); +#111675 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111676 = ADVANCED_FACE('',(#111677),#111718,.T.); +#111677 = FACE_BOUND('',#111678,.T.); +#111678 = EDGE_LOOP('',(#111679,#111687,#111688,#111696,#111704,#111712) + ); +#111679 = ORIENTED_EDGE('',*,*,#111680,.T.); +#111680 = EDGE_CURVE('',#111681,#110546,#111683,.T.); +#111681 = VERTEX_POINT('',#111682); +#111682 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#111683 = LINE('',#111684,#111685); +#111684 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#111685 = VECTOR('',#111686,1.); +#111686 = DIRECTION('',(0.,0.,1.)); +#111687 = ORIENTED_EDGE('',*,*,#110553,.F.); +#111688 = ORIENTED_EDGE('',*,*,#111689,.T.); +#111689 = EDGE_CURVE('',#110554,#111690,#111692,.T.); +#111690 = VERTEX_POINT('',#111691); +#111691 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#111692 = LINE('',#111693,#111694); +#111693 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#111694 = VECTOR('',#111695,1.); +#111695 = DIRECTION('',(0.,0.,-1.)); +#111696 = ORIENTED_EDGE('',*,*,#111697,.T.); +#111697 = EDGE_CURVE('',#111690,#111698,#111700,.T.); +#111698 = VERTEX_POINT('',#111699); +#111699 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#111700 = LINE('',#111701,#111702); +#111701 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#111702 = VECTOR('',#111703,1.); +#111703 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111704 = ORIENTED_EDGE('',*,*,#111705,.F.); +#111705 = EDGE_CURVE('',#111706,#111698,#111708,.T.); +#111706 = VERTEX_POINT('',#111707); +#111707 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#111708 = LINE('',#111709,#111710); +#111709 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#111710 = VECTOR('',#111711,1.); +#111711 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111712 = ORIENTED_EDGE('',*,*,#111713,.T.); +#111713 = EDGE_CURVE('',#111706,#111681,#111714,.T.); +#111714 = LINE('',#111715,#111716); +#111715 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#111716 = VECTOR('',#111717,1.); +#111717 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111718 = PLANE('',#111719); +#111719 = AXIS2_PLACEMENT_3D('',#111720,#111721,#111722); +#111720 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#111721 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111722 = DIRECTION('',(0.,0.,1.)); +#111723 = ADVANCED_FACE('',(#111724),#111735,.T.); +#111724 = FACE_BOUND('',#111725,.T.); +#111725 = EDGE_LOOP('',(#111726,#111727,#111728,#111734)); +#111726 = ORIENTED_EDGE('',*,*,#110601,.F.); +#111727 = ORIENTED_EDGE('',*,*,#110611,.T.); +#111728 = ORIENTED_EDGE('',*,*,#111729,.T.); +#111729 = EDGE_CURVE('',#110612,#110652,#111730,.T.); +#111730 = LINE('',#111731,#111732); +#111731 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#111732 = VECTOR('',#111733,1.); +#111733 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111734 = ORIENTED_EDGE('',*,*,#110659,.T.); +#111735 = PLANE('',#111736); +#111736 = AXIS2_PLACEMENT_3D('',#111737,#111738,#111739); +#111737 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#111738 = DIRECTION('',(0.,-0.,-1.)); +#111739 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111740 = ADVANCED_FACE('',(#111741),#111782,.F.); +#111741 = FACE_BOUND('',#111742,.F.); +#111742 = EDGE_LOOP('',(#111743,#111751,#111752,#111760,#111768,#111776) + ); +#111743 = ORIENTED_EDGE('',*,*,#111744,.T.); +#111744 = EDGE_CURVE('',#111745,#110652,#111747,.T.); +#111745 = VERTEX_POINT('',#111746); +#111746 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#111747 = LINE('',#111748,#111749); +#111748 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#111749 = VECTOR('',#111750,1.); +#111750 = DIRECTION('',(0.,0.,1.)); +#111751 = ORIENTED_EDGE('',*,*,#110651,.F.); +#111752 = ORIENTED_EDGE('',*,*,#111753,.T.); +#111753 = EDGE_CURVE('',#110644,#111754,#111756,.T.); +#111754 = VERTEX_POINT('',#111755); +#111755 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#111756 = LINE('',#111757,#111758); +#111757 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#111758 = VECTOR('',#111759,1.); +#111759 = DIRECTION('',(0.,0.,-1.)); +#111760 = ORIENTED_EDGE('',*,*,#111761,.T.); +#111761 = EDGE_CURVE('',#111754,#111762,#111764,.T.); +#111762 = VERTEX_POINT('',#111763); +#111763 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#111764 = LINE('',#111765,#111766); +#111765 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#111766 = VECTOR('',#111767,1.); +#111767 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111768 = ORIENTED_EDGE('',*,*,#111769,.T.); +#111769 = EDGE_CURVE('',#111762,#111770,#111772,.T.); +#111770 = VERTEX_POINT('',#111771); +#111771 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#111772 = LINE('',#111773,#111774); +#111773 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#111774 = VECTOR('',#111775,1.); +#111775 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111776 = ORIENTED_EDGE('',*,*,#111777,.T.); +#111777 = EDGE_CURVE('',#111770,#111745,#111778,.T.); +#111778 = LINE('',#111779,#111780); +#111779 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#111780 = VECTOR('',#111781,1.); +#111781 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111782 = PLANE('',#111783); +#111783 = AXIS2_PLACEMENT_3D('',#111784,#111785,#111786); +#111784 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#111785 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111786 = DIRECTION('',(0.,0.,1.)); +#111787 = ADVANCED_FACE('',(#111788),#111799,.T.); +#111788 = FACE_BOUND('',#111789,.T.); +#111789 = EDGE_LOOP('',(#111790,#111796,#111797,#111798)); +#111790 = ORIENTED_EDGE('',*,*,#111791,.F.); +#111791 = EDGE_CURVE('',#110620,#110644,#111792,.T.); +#111792 = LINE('',#111793,#111794); +#111793 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#111794 = VECTOR('',#111795,1.); +#111795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111796 = ORIENTED_EDGE('',*,*,#110627,.T.); +#111797 = ORIENTED_EDGE('',*,*,#110635,.T.); +#111798 = ORIENTED_EDGE('',*,*,#110643,.T.); +#111799 = PLANE('',#111800); +#111800 = AXIS2_PLACEMENT_3D('',#111801,#111802,#111803); +#111801 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#111802 = DIRECTION('',(0.,-0.,-1.)); +#111803 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111804 = ADVANCED_FACE('',(#111805),#111846,.T.); +#111805 = FACE_BOUND('',#111806,.T.); +#111806 = EDGE_LOOP('',(#111807,#111815,#111816,#111824,#111832,#111840) + ); +#111807 = ORIENTED_EDGE('',*,*,#111808,.T.); +#111808 = EDGE_CURVE('',#111809,#110612,#111811,.T.); +#111809 = VERTEX_POINT('',#111810); +#111810 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#111811 = LINE('',#111812,#111813); +#111812 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#111813 = VECTOR('',#111814,1.); +#111814 = DIRECTION('',(0.,0.,1.)); +#111815 = ORIENTED_EDGE('',*,*,#110619,.F.); +#111816 = ORIENTED_EDGE('',*,*,#111817,.T.); +#111817 = EDGE_CURVE('',#110620,#111818,#111820,.T.); +#111818 = VERTEX_POINT('',#111819); +#111819 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#111820 = LINE('',#111821,#111822); +#111821 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#111822 = VECTOR('',#111823,1.); +#111823 = DIRECTION('',(0.,0.,-1.)); +#111824 = ORIENTED_EDGE('',*,*,#111825,.T.); +#111825 = EDGE_CURVE('',#111818,#111826,#111828,.T.); +#111826 = VERTEX_POINT('',#111827); +#111827 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#111828 = LINE('',#111829,#111830); +#111829 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#111830 = VECTOR('',#111831,1.); +#111831 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111832 = ORIENTED_EDGE('',*,*,#111833,.F.); +#111833 = EDGE_CURVE('',#111834,#111826,#111836,.T.); +#111834 = VERTEX_POINT('',#111835); +#111835 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#111836 = LINE('',#111837,#111838); +#111837 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#111838 = VECTOR('',#111839,1.); +#111839 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111840 = ORIENTED_EDGE('',*,*,#111841,.T.); +#111841 = EDGE_CURVE('',#111834,#111809,#111842,.T.); +#111842 = LINE('',#111843,#111844); +#111843 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#111844 = VECTOR('',#111845,1.); +#111845 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111846 = PLANE('',#111847); +#111847 = AXIS2_PLACEMENT_3D('',#111848,#111849,#111850); +#111848 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#111849 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111850 = DIRECTION('',(0.,0.,1.)); +#111851 = ADVANCED_FACE('',(#111852),#111863,.T.); +#111852 = FACE_BOUND('',#111853,.T.); +#111853 = EDGE_LOOP('',(#111854,#111855,#111856,#111862)); +#111854 = ORIENTED_EDGE('',*,*,#110667,.F.); +#111855 = ORIENTED_EDGE('',*,*,#110677,.T.); +#111856 = ORIENTED_EDGE('',*,*,#111857,.T.); +#111857 = EDGE_CURVE('',#110678,#110718,#111858,.T.); +#111858 = LINE('',#111859,#111860); +#111859 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#111860 = VECTOR('',#111861,1.); +#111861 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111862 = ORIENTED_EDGE('',*,*,#110725,.T.); +#111863 = PLANE('',#111864); +#111864 = AXIS2_PLACEMENT_3D('',#111865,#111866,#111867); +#111865 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#111866 = DIRECTION('',(0.,-0.,-1.)); +#111867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111868 = ADVANCED_FACE('',(#111869),#111910,.F.); +#111869 = FACE_BOUND('',#111870,.F.); +#111870 = EDGE_LOOP('',(#111871,#111879,#111880,#111888,#111896,#111904) + ); +#111871 = ORIENTED_EDGE('',*,*,#111872,.T.); +#111872 = EDGE_CURVE('',#111873,#110718,#111875,.T.); +#111873 = VERTEX_POINT('',#111874); +#111874 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#111875 = LINE('',#111876,#111877); +#111876 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#111877 = VECTOR('',#111878,1.); +#111878 = DIRECTION('',(0.,0.,1.)); +#111879 = ORIENTED_EDGE('',*,*,#110717,.F.); +#111880 = ORIENTED_EDGE('',*,*,#111881,.T.); +#111881 = EDGE_CURVE('',#110710,#111882,#111884,.T.); +#111882 = VERTEX_POINT('',#111883); +#111883 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#111884 = LINE('',#111885,#111886); +#111885 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#111886 = VECTOR('',#111887,1.); +#111887 = DIRECTION('',(0.,0.,-1.)); +#111888 = ORIENTED_EDGE('',*,*,#111889,.T.); +#111889 = EDGE_CURVE('',#111882,#111890,#111892,.T.); +#111890 = VERTEX_POINT('',#111891); +#111891 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#111892 = LINE('',#111893,#111894); +#111893 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#111894 = VECTOR('',#111895,1.); +#111895 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111896 = ORIENTED_EDGE('',*,*,#111897,.T.); +#111897 = EDGE_CURVE('',#111890,#111898,#111900,.T.); +#111898 = VERTEX_POINT('',#111899); +#111899 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#111900 = LINE('',#111901,#111902); +#111901 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#111902 = VECTOR('',#111903,1.); +#111903 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111904 = ORIENTED_EDGE('',*,*,#111905,.T.); +#111905 = EDGE_CURVE('',#111898,#111873,#111906,.T.); +#111906 = LINE('',#111907,#111908); +#111907 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#111908 = VECTOR('',#111909,1.); +#111909 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111910 = PLANE('',#111911); +#111911 = AXIS2_PLACEMENT_3D('',#111912,#111913,#111914); +#111912 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#111913 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111914 = DIRECTION('',(0.,0.,1.)); +#111915 = ADVANCED_FACE('',(#111916),#111927,.T.); +#111916 = FACE_BOUND('',#111917,.T.); +#111917 = EDGE_LOOP('',(#111918,#111924,#111925,#111926)); +#111918 = ORIENTED_EDGE('',*,*,#111919,.F.); +#111919 = EDGE_CURVE('',#110686,#110710,#111920,.T.); +#111920 = LINE('',#111921,#111922); +#111921 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#111922 = VECTOR('',#111923,1.); +#111923 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111924 = ORIENTED_EDGE('',*,*,#110693,.T.); +#111925 = ORIENTED_EDGE('',*,*,#110701,.T.); +#111926 = ORIENTED_EDGE('',*,*,#110709,.T.); +#111927 = PLANE('',#111928); +#111928 = AXIS2_PLACEMENT_3D('',#111929,#111930,#111931); +#111929 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#111930 = DIRECTION('',(0.,-0.,-1.)); +#111931 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111932 = ADVANCED_FACE('',(#111933),#111974,.T.); +#111933 = FACE_BOUND('',#111934,.T.); +#111934 = EDGE_LOOP('',(#111935,#111943,#111944,#111952,#111960,#111968) + ); +#111935 = ORIENTED_EDGE('',*,*,#111936,.T.); +#111936 = EDGE_CURVE('',#111937,#110678,#111939,.T.); +#111937 = VERTEX_POINT('',#111938); +#111938 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#111939 = LINE('',#111940,#111941); +#111940 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#111941 = VECTOR('',#111942,1.); +#111942 = DIRECTION('',(0.,0.,1.)); +#111943 = ORIENTED_EDGE('',*,*,#110685,.F.); +#111944 = ORIENTED_EDGE('',*,*,#111945,.T.); +#111945 = EDGE_CURVE('',#110686,#111946,#111948,.T.); +#111946 = VERTEX_POINT('',#111947); +#111947 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#111948 = LINE('',#111949,#111950); +#111949 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#111950 = VECTOR('',#111951,1.); +#111951 = DIRECTION('',(0.,0.,-1.)); +#111952 = ORIENTED_EDGE('',*,*,#111953,.T.); +#111953 = EDGE_CURVE('',#111946,#111954,#111956,.T.); +#111954 = VERTEX_POINT('',#111955); +#111955 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#111956 = LINE('',#111957,#111958); +#111957 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#111958 = VECTOR('',#111959,1.); +#111959 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#111960 = ORIENTED_EDGE('',*,*,#111961,.F.); +#111961 = EDGE_CURVE('',#111962,#111954,#111964,.T.); +#111962 = VERTEX_POINT('',#111963); +#111963 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#111964 = LINE('',#111965,#111966); +#111965 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#111966 = VECTOR('',#111967,1.); +#111967 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111968 = ORIENTED_EDGE('',*,*,#111969,.T.); +#111969 = EDGE_CURVE('',#111962,#111937,#111970,.T.); +#111970 = LINE('',#111971,#111972); +#111971 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#111972 = VECTOR('',#111973,1.); +#111973 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#111974 = PLANE('',#111975); +#111975 = AXIS2_PLACEMENT_3D('',#111976,#111977,#111978); +#111976 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#111977 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#111978 = DIRECTION('',(0.,0.,1.)); +#111979 = ADVANCED_FACE('',(#111980),#111991,.T.); +#111980 = FACE_BOUND('',#111981,.T.); +#111981 = EDGE_LOOP('',(#111982,#111983,#111984,#111990)); +#111982 = ORIENTED_EDGE('',*,*,#110733,.F.); +#111983 = ORIENTED_EDGE('',*,*,#110743,.T.); +#111984 = ORIENTED_EDGE('',*,*,#111985,.T.); +#111985 = EDGE_CURVE('',#110744,#110784,#111986,.T.); +#111986 = LINE('',#111987,#111988); +#111987 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#111988 = VECTOR('',#111989,1.); +#111989 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#111990 = ORIENTED_EDGE('',*,*,#110791,.T.); +#111991 = PLANE('',#111992); +#111992 = AXIS2_PLACEMENT_3D('',#111993,#111994,#111995); +#111993 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#111994 = DIRECTION('',(0.,-0.,-1.)); +#111995 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#111996 = ADVANCED_FACE('',(#111997),#112038,.F.); +#111997 = FACE_BOUND('',#111998,.F.); +#111998 = EDGE_LOOP('',(#111999,#112007,#112008,#112016,#112024,#112032) + ); +#111999 = ORIENTED_EDGE('',*,*,#112000,.T.); +#112000 = EDGE_CURVE('',#112001,#110784,#112003,.T.); +#112001 = VERTEX_POINT('',#112002); +#112002 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#112003 = LINE('',#112004,#112005); +#112004 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#112005 = VECTOR('',#112006,1.); +#112006 = DIRECTION('',(0.,0.,1.)); +#112007 = ORIENTED_EDGE('',*,*,#110783,.F.); +#112008 = ORIENTED_EDGE('',*,*,#112009,.T.); +#112009 = EDGE_CURVE('',#110776,#112010,#112012,.T.); +#112010 = VERTEX_POINT('',#112011); +#112011 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#112012 = LINE('',#112013,#112014); +#112013 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#112014 = VECTOR('',#112015,1.); +#112015 = DIRECTION('',(0.,0.,-1.)); +#112016 = ORIENTED_EDGE('',*,*,#112017,.T.); +#112017 = EDGE_CURVE('',#112010,#112018,#112020,.T.); +#112018 = VERTEX_POINT('',#112019); +#112019 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#112020 = LINE('',#112021,#112022); +#112021 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#112022 = VECTOR('',#112023,1.); +#112023 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112024 = ORIENTED_EDGE('',*,*,#112025,.T.); +#112025 = EDGE_CURVE('',#112018,#112026,#112028,.T.); +#112026 = VERTEX_POINT('',#112027); +#112027 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#112028 = LINE('',#112029,#112030); +#112029 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#112030 = VECTOR('',#112031,1.); +#112031 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112032 = ORIENTED_EDGE('',*,*,#112033,.T.); +#112033 = EDGE_CURVE('',#112026,#112001,#112034,.T.); +#112034 = LINE('',#112035,#112036); +#112035 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#112036 = VECTOR('',#112037,1.); +#112037 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112038 = PLANE('',#112039); +#112039 = AXIS2_PLACEMENT_3D('',#112040,#112041,#112042); +#112040 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#112041 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112042 = DIRECTION('',(0.,0.,1.)); +#112043 = ADVANCED_FACE('',(#112044),#112055,.T.); +#112044 = FACE_BOUND('',#112045,.T.); +#112045 = EDGE_LOOP('',(#112046,#112052,#112053,#112054)); +#112046 = ORIENTED_EDGE('',*,*,#112047,.F.); +#112047 = EDGE_CURVE('',#110752,#110776,#112048,.T.); +#112048 = LINE('',#112049,#112050); +#112049 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#112050 = VECTOR('',#112051,1.); +#112051 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112052 = ORIENTED_EDGE('',*,*,#110759,.T.); +#112053 = ORIENTED_EDGE('',*,*,#110767,.T.); +#112054 = ORIENTED_EDGE('',*,*,#110775,.T.); +#112055 = PLANE('',#112056); +#112056 = AXIS2_PLACEMENT_3D('',#112057,#112058,#112059); +#112057 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#112058 = DIRECTION('',(0.,-0.,-1.)); +#112059 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112060 = ADVANCED_FACE('',(#112061),#112102,.T.); +#112061 = FACE_BOUND('',#112062,.T.); +#112062 = EDGE_LOOP('',(#112063,#112071,#112072,#112080,#112088,#112096) + ); +#112063 = ORIENTED_EDGE('',*,*,#112064,.T.); +#112064 = EDGE_CURVE('',#112065,#110744,#112067,.T.); +#112065 = VERTEX_POINT('',#112066); +#112066 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#112067 = LINE('',#112068,#112069); +#112068 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#112069 = VECTOR('',#112070,1.); +#112070 = DIRECTION('',(0.,0.,1.)); +#112071 = ORIENTED_EDGE('',*,*,#110751,.F.); +#112072 = ORIENTED_EDGE('',*,*,#112073,.T.); +#112073 = EDGE_CURVE('',#110752,#112074,#112076,.T.); +#112074 = VERTEX_POINT('',#112075); +#112075 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#112076 = LINE('',#112077,#112078); +#112077 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#112078 = VECTOR('',#112079,1.); +#112079 = DIRECTION('',(0.,0.,-1.)); +#112080 = ORIENTED_EDGE('',*,*,#112081,.T.); +#112081 = EDGE_CURVE('',#112074,#112082,#112084,.T.); +#112082 = VERTEX_POINT('',#112083); +#112083 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#112084 = LINE('',#112085,#112086); +#112085 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#112086 = VECTOR('',#112087,1.); +#112087 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112088 = ORIENTED_EDGE('',*,*,#112089,.F.); +#112089 = EDGE_CURVE('',#112090,#112082,#112092,.T.); +#112090 = VERTEX_POINT('',#112091); +#112091 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#112092 = LINE('',#112093,#112094); +#112093 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#112094 = VECTOR('',#112095,1.); +#112095 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112096 = ORIENTED_EDGE('',*,*,#112097,.T.); +#112097 = EDGE_CURVE('',#112090,#112065,#112098,.T.); +#112098 = LINE('',#112099,#112100); +#112099 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#112100 = VECTOR('',#112101,1.); +#112101 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112102 = PLANE('',#112103); +#112103 = AXIS2_PLACEMENT_3D('',#112104,#112105,#112106); +#112104 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#112105 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112106 = DIRECTION('',(0.,0.,1.)); +#112107 = ADVANCED_FACE('',(#112108),#112119,.T.); +#112108 = FACE_BOUND('',#112109,.T.); +#112109 = EDGE_LOOP('',(#112110,#112111,#112112,#112118)); +#112110 = ORIENTED_EDGE('',*,*,#110799,.F.); +#112111 = ORIENTED_EDGE('',*,*,#110809,.T.); +#112112 = ORIENTED_EDGE('',*,*,#112113,.T.); +#112113 = EDGE_CURVE('',#110810,#110850,#112114,.T.); +#112114 = LINE('',#112115,#112116); +#112115 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#112116 = VECTOR('',#112117,1.); +#112117 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112118 = ORIENTED_EDGE('',*,*,#110857,.T.); +#112119 = PLANE('',#112120); +#112120 = AXIS2_PLACEMENT_3D('',#112121,#112122,#112123); +#112121 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#112122 = DIRECTION('',(0.,-0.,-1.)); +#112123 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112124 = ADVANCED_FACE('',(#112125),#112166,.F.); +#112125 = FACE_BOUND('',#112126,.F.); +#112126 = EDGE_LOOP('',(#112127,#112135,#112136,#112144,#112152,#112160) + ); +#112127 = ORIENTED_EDGE('',*,*,#112128,.T.); +#112128 = EDGE_CURVE('',#112129,#110850,#112131,.T.); +#112129 = VERTEX_POINT('',#112130); +#112130 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#112131 = LINE('',#112132,#112133); +#112132 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#112133 = VECTOR('',#112134,1.); +#112134 = DIRECTION('',(0.,0.,1.)); +#112135 = ORIENTED_EDGE('',*,*,#110849,.F.); +#112136 = ORIENTED_EDGE('',*,*,#112137,.T.); +#112137 = EDGE_CURVE('',#110842,#112138,#112140,.T.); +#112138 = VERTEX_POINT('',#112139); +#112139 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#112140 = LINE('',#112141,#112142); +#112141 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#112142 = VECTOR('',#112143,1.); +#112143 = DIRECTION('',(0.,0.,-1.)); +#112144 = ORIENTED_EDGE('',*,*,#112145,.T.); +#112145 = EDGE_CURVE('',#112138,#112146,#112148,.T.); +#112146 = VERTEX_POINT('',#112147); +#112147 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#112148 = LINE('',#112149,#112150); +#112149 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#112150 = VECTOR('',#112151,1.); +#112151 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112152 = ORIENTED_EDGE('',*,*,#112153,.T.); +#112153 = EDGE_CURVE('',#112146,#112154,#112156,.T.); +#112154 = VERTEX_POINT('',#112155); +#112155 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#112156 = LINE('',#112157,#112158); +#112157 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#112158 = VECTOR('',#112159,1.); +#112159 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112160 = ORIENTED_EDGE('',*,*,#112161,.T.); +#112161 = EDGE_CURVE('',#112154,#112129,#112162,.T.); +#112162 = LINE('',#112163,#112164); +#112163 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#112164 = VECTOR('',#112165,1.); +#112165 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112166 = PLANE('',#112167); +#112167 = AXIS2_PLACEMENT_3D('',#112168,#112169,#112170); +#112168 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#112169 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112170 = DIRECTION('',(0.,0.,1.)); +#112171 = ADVANCED_FACE('',(#112172),#112183,.T.); +#112172 = FACE_BOUND('',#112173,.T.); +#112173 = EDGE_LOOP('',(#112174,#112180,#112181,#112182)); +#112174 = ORIENTED_EDGE('',*,*,#112175,.F.); +#112175 = EDGE_CURVE('',#110818,#110842,#112176,.T.); +#112176 = LINE('',#112177,#112178); +#112177 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#112178 = VECTOR('',#112179,1.); +#112179 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112180 = ORIENTED_EDGE('',*,*,#110825,.T.); +#112181 = ORIENTED_EDGE('',*,*,#110833,.T.); +#112182 = ORIENTED_EDGE('',*,*,#110841,.T.); +#112183 = PLANE('',#112184); +#112184 = AXIS2_PLACEMENT_3D('',#112185,#112186,#112187); +#112185 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#112186 = DIRECTION('',(0.,-0.,-1.)); +#112187 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112188 = ADVANCED_FACE('',(#112189),#112230,.T.); +#112189 = FACE_BOUND('',#112190,.T.); +#112190 = EDGE_LOOP('',(#112191,#112199,#112200,#112208,#112216,#112224) + ); +#112191 = ORIENTED_EDGE('',*,*,#112192,.T.); +#112192 = EDGE_CURVE('',#112193,#110810,#112195,.T.); +#112193 = VERTEX_POINT('',#112194); +#112194 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#112195 = LINE('',#112196,#112197); +#112196 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#112197 = VECTOR('',#112198,1.); +#112198 = DIRECTION('',(0.,0.,1.)); +#112199 = ORIENTED_EDGE('',*,*,#110817,.F.); +#112200 = ORIENTED_EDGE('',*,*,#112201,.T.); +#112201 = EDGE_CURVE('',#110818,#112202,#112204,.T.); +#112202 = VERTEX_POINT('',#112203); +#112203 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#112204 = LINE('',#112205,#112206); +#112205 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#112206 = VECTOR('',#112207,1.); +#112207 = DIRECTION('',(0.,0.,-1.)); +#112208 = ORIENTED_EDGE('',*,*,#112209,.T.); +#112209 = EDGE_CURVE('',#112202,#112210,#112212,.T.); +#112210 = VERTEX_POINT('',#112211); +#112211 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#112212 = LINE('',#112213,#112214); +#112213 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#112214 = VECTOR('',#112215,1.); +#112215 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#112216 = ORIENTED_EDGE('',*,*,#112217,.F.); +#112217 = EDGE_CURVE('',#112218,#112210,#112220,.T.); +#112218 = VERTEX_POINT('',#112219); +#112219 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#112220 = LINE('',#112221,#112222); +#112221 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#112222 = VECTOR('',#112223,1.); +#112223 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112224 = ORIENTED_EDGE('',*,*,#112225,.T.); +#112225 = EDGE_CURVE('',#112218,#112193,#112226,.T.); +#112226 = LINE('',#112227,#112228); +#112227 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#112228 = VECTOR('',#112229,1.); +#112229 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#112230 = PLANE('',#112231); +#112231 = AXIS2_PLACEMENT_3D('',#112232,#112233,#112234); +#112232 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#112233 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112234 = DIRECTION('',(0.,0.,1.)); +#112235 = ADVANCED_FACE('',(#112236),#112261,.F.); +#112236 = FACE_BOUND('',#112237,.F.); +#112237 = EDGE_LOOP('',(#112238,#112246,#112254,#112260)); +#112238 = ORIENTED_EDGE('',*,*,#112239,.T.); +#112239 = EDGE_CURVE('',#110896,#112240,#112242,.T.); +#112240 = VERTEX_POINT('',#112241); +#112241 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#112242 = LINE('',#112243,#112244); +#112243 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#112244 = VECTOR('',#112245,1.); +#112245 = DIRECTION('',(0.,-0.,-1.)); +#112246 = ORIENTED_EDGE('',*,*,#112247,.T.); +#112247 = EDGE_CURVE('',#112240,#112248,#112250,.T.); +#112248 = VERTEX_POINT('',#112249); +#112249 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#112250 = LINE('',#112251,#112252); +#112251 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#112252 = VECTOR('',#112253,1.); +#112253 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112254 = ORIENTED_EDGE('',*,*,#112255,.F.); +#112255 = EDGE_CURVE('',#110905,#112248,#112256,.T.); +#112256 = LINE('',#112257,#112258); +#112257 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#112258 = VECTOR('',#112259,1.); +#112259 = DIRECTION('',(0.,-0.,-1.)); +#112260 = ORIENTED_EDGE('',*,*,#110912,.F.); +#112261 = PLANE('',#112262); +#112262 = AXIS2_PLACEMENT_3D('',#112263,#112264,#112265); +#112263 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#112264 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112265 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112266 = ADVANCED_FACE('',(#112267),#112317,.F.); +#112267 = FACE_BOUND('',#112268,.F.); +#112268 = EDGE_LOOP('',(#112269,#112270,#112271,#112279,#112287,#112295, + #112303,#112311)); +#112269 = ORIENTED_EDGE('',*,*,#110936,.F.); +#112270 = ORIENTED_EDGE('',*,*,#112255,.T.); +#112271 = ORIENTED_EDGE('',*,*,#112272,.T.); +#112272 = EDGE_CURVE('',#112248,#112273,#112275,.T.); +#112273 = VERTEX_POINT('',#112274); +#112274 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#112275 = LINE('',#112276,#112277); +#112276 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#112277 = VECTOR('',#112278,1.); +#112278 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112279 = ORIENTED_EDGE('',*,*,#112280,.T.); +#112280 = EDGE_CURVE('',#112273,#112281,#112283,.T.); +#112281 = VERTEX_POINT('',#112282); +#112282 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#112283 = LINE('',#112284,#112285); +#112284 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#112285 = VECTOR('',#112286,1.); +#112286 = DIRECTION('',(0.,-0.,1.)); +#112287 = ORIENTED_EDGE('',*,*,#112288,.F.); +#112288 = EDGE_CURVE('',#112289,#112281,#112291,.T.); +#112289 = VERTEX_POINT('',#112290); +#112290 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#112291 = LINE('',#112292,#112293); +#112292 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#112293 = VECTOR('',#112294,1.); +#112294 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112295 = ORIENTED_EDGE('',*,*,#112296,.F.); +#112296 = EDGE_CURVE('',#112297,#112289,#112299,.T.); +#112297 = VERTEX_POINT('',#112298); +#112298 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#112299 = LINE('',#112300,#112301); +#112300 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#112301 = VECTOR('',#112302,1.); +#112302 = DIRECTION('',(0.,-0.,1.)); +#112303 = ORIENTED_EDGE('',*,*,#112304,.T.); +#112304 = EDGE_CURVE('',#112297,#112305,#112307,.T.); +#112305 = VERTEX_POINT('',#112306); +#112306 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#112307 = LINE('',#112308,#112309); +#112308 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#112309 = VECTOR('',#112310,1.); +#112310 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112311 = ORIENTED_EDGE('',*,*,#112312,.F.); +#112312 = EDGE_CURVE('',#110929,#112305,#112313,.T.); +#112313 = LINE('',#112314,#112315); +#112314 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#112315 = VECTOR('',#112316,1.); +#112316 = DIRECTION('',(0.,-0.,-1.)); +#112317 = PLANE('',#112318); +#112318 = AXIS2_PLACEMENT_3D('',#112319,#112320,#112321); +#112319 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#112320 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112321 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112322 = ADVANCED_FACE('',(#112323),#112341,.F.); +#112323 = FACE_BOUND('',#112324,.F.); +#112324 = EDGE_LOOP('',(#112325,#112326,#112334,#112340)); +#112325 = ORIENTED_EDGE('',*,*,#112312,.T.); +#112326 = ORIENTED_EDGE('',*,*,#112327,.T.); +#112327 = EDGE_CURVE('',#112305,#112328,#112330,.T.); +#112328 = VERTEX_POINT('',#112329); +#112329 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#112330 = LINE('',#112331,#112332); +#112331 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#112332 = VECTOR('',#112333,1.); +#112333 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112334 = ORIENTED_EDGE('',*,*,#112335,.F.); +#112335 = EDGE_CURVE('',#110953,#112328,#112336,.T.); +#112336 = LINE('',#112337,#112338); +#112337 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#112338 = VECTOR('',#112339,1.); +#112339 = DIRECTION('',(0.,-0.,-1.)); +#112340 = ORIENTED_EDGE('',*,*,#110960,.F.); +#112341 = PLANE('',#112342); +#112342 = AXIS2_PLACEMENT_3D('',#112343,#112344,#112345); +#112343 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#112344 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112345 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112346 = ADVANCED_FACE('',(#112347),#112390,.F.); +#112347 = FACE_BOUND('',#112348,.F.); +#112348 = EDGE_LOOP('',(#112349,#112350,#112351,#112359,#112367,#112375, + #112383,#112389)); +#112349 = ORIENTED_EDGE('',*,*,#110977,.F.); +#112350 = ORIENTED_EDGE('',*,*,#112335,.T.); +#112351 = ORIENTED_EDGE('',*,*,#112352,.T.); +#112352 = EDGE_CURVE('',#112328,#112353,#112355,.T.); +#112353 = VERTEX_POINT('',#112354); +#112354 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#112355 = LINE('',#112356,#112357); +#112356 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#112357 = VECTOR('',#112358,1.); +#112358 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112359 = ORIENTED_EDGE('',*,*,#112360,.F.); +#112360 = EDGE_CURVE('',#112361,#112353,#112363,.T.); +#112361 = VERTEX_POINT('',#112362); +#112362 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#112363 = LINE('',#112364,#112365); +#112364 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#112365 = VECTOR('',#112366,1.); +#112366 = DIRECTION('',(-0.,0.,-1.)); +#112367 = ORIENTED_EDGE('',*,*,#112368,.T.); +#112368 = EDGE_CURVE('',#112361,#112369,#112371,.T.); +#112369 = VERTEX_POINT('',#112370); +#112370 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#112371 = LINE('',#112372,#112373); +#112372 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#112373 = VECTOR('',#112374,1.); +#112374 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112375 = ORIENTED_EDGE('',*,*,#112376,.T.); +#112376 = EDGE_CURVE('',#112369,#112377,#112379,.T.); +#112377 = VERTEX_POINT('',#112378); +#112378 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#112379 = LINE('',#112380,#112381); +#112380 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#112381 = VECTOR('',#112382,1.); +#112382 = DIRECTION('',(-0.,0.,-1.)); +#112383 = ORIENTED_EDGE('',*,*,#112384,.T.); +#112384 = EDGE_CURVE('',#112377,#112240,#112385,.T.); +#112385 = LINE('',#112386,#112387); +#112386 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#112387 = VECTOR('',#112388,1.); +#112388 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112389 = ORIENTED_EDGE('',*,*,#112239,.F.); +#112390 = PLANE('',#112391); +#112391 = AXIS2_PLACEMENT_3D('',#112392,#112393,#112394); +#112392 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#112393 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112394 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112395 = ADVANCED_FACE('',(#112396),#112421,.F.); +#112396 = FACE_BOUND('',#112397,.F.); +#112397 = EDGE_LOOP('',(#112398,#112406,#112414,#112420)); +#112398 = ORIENTED_EDGE('',*,*,#112399,.T.); +#112399 = EDGE_CURVE('',#110992,#112400,#112402,.T.); +#112400 = VERTEX_POINT('',#112401); +#112401 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#112402 = LINE('',#112403,#112404); +#112403 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#112404 = VECTOR('',#112405,1.); +#112405 = DIRECTION('',(0.,-0.,-1.)); +#112406 = ORIENTED_EDGE('',*,*,#112407,.T.); +#112407 = EDGE_CURVE('',#112400,#112408,#112410,.T.); +#112408 = VERTEX_POINT('',#112409); +#112409 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#112410 = LINE('',#112411,#112412); +#112411 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#112412 = VECTOR('',#112413,1.); +#112413 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112414 = ORIENTED_EDGE('',*,*,#112415,.F.); +#112415 = EDGE_CURVE('',#111001,#112408,#112416,.T.); +#112416 = LINE('',#112417,#112418); +#112417 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#112418 = VECTOR('',#112419,1.); +#112419 = DIRECTION('',(0.,-0.,-1.)); +#112420 = ORIENTED_EDGE('',*,*,#111008,.F.); +#112421 = PLANE('',#112422); +#112422 = AXIS2_PLACEMENT_3D('',#112423,#112424,#112425); +#112423 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#112424 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112425 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112426 = ADVANCED_FACE('',(#112427),#112477,.F.); +#112427 = FACE_BOUND('',#112428,.F.); +#112428 = EDGE_LOOP('',(#112429,#112430,#112431,#112439,#112447,#112455, + #112463,#112471)); +#112429 = ORIENTED_EDGE('',*,*,#111032,.F.); +#112430 = ORIENTED_EDGE('',*,*,#112415,.T.); +#112431 = ORIENTED_EDGE('',*,*,#112432,.T.); +#112432 = EDGE_CURVE('',#112408,#112433,#112435,.T.); +#112433 = VERTEX_POINT('',#112434); +#112434 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#112435 = LINE('',#112436,#112437); +#112436 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#112437 = VECTOR('',#112438,1.); +#112438 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112439 = ORIENTED_EDGE('',*,*,#112440,.T.); +#112440 = EDGE_CURVE('',#112433,#112441,#112443,.T.); +#112441 = VERTEX_POINT('',#112442); +#112442 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#112443 = LINE('',#112444,#112445); +#112444 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#112445 = VECTOR('',#112446,1.); +#112446 = DIRECTION('',(0.,-0.,1.)); +#112447 = ORIENTED_EDGE('',*,*,#112448,.F.); +#112448 = EDGE_CURVE('',#112449,#112441,#112451,.T.); +#112449 = VERTEX_POINT('',#112450); +#112450 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#112451 = LINE('',#112452,#112453); +#112452 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#112453 = VECTOR('',#112454,1.); +#112454 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112455 = ORIENTED_EDGE('',*,*,#112456,.F.); +#112456 = EDGE_CURVE('',#112457,#112449,#112459,.T.); +#112457 = VERTEX_POINT('',#112458); +#112458 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#112459 = LINE('',#112460,#112461); +#112460 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#112461 = VECTOR('',#112462,1.); +#112462 = DIRECTION('',(0.,-0.,1.)); +#112463 = ORIENTED_EDGE('',*,*,#112464,.T.); +#112464 = EDGE_CURVE('',#112457,#112465,#112467,.T.); +#112465 = VERTEX_POINT('',#112466); +#112466 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#112467 = LINE('',#112468,#112469); +#112468 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#112469 = VECTOR('',#112470,1.); +#112470 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112471 = ORIENTED_EDGE('',*,*,#112472,.F.); +#112472 = EDGE_CURVE('',#111025,#112465,#112473,.T.); +#112473 = LINE('',#112474,#112475); +#112474 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#112475 = VECTOR('',#112476,1.); +#112476 = DIRECTION('',(0.,-0.,-1.)); +#112477 = PLANE('',#112478); +#112478 = AXIS2_PLACEMENT_3D('',#112479,#112480,#112481); +#112479 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#112480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112481 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112482 = ADVANCED_FACE('',(#112483),#112501,.F.); +#112483 = FACE_BOUND('',#112484,.F.); +#112484 = EDGE_LOOP('',(#112485,#112486,#112494,#112500)); +#112485 = ORIENTED_EDGE('',*,*,#112472,.T.); +#112486 = ORIENTED_EDGE('',*,*,#112487,.T.); +#112487 = EDGE_CURVE('',#112465,#112488,#112490,.T.); +#112488 = VERTEX_POINT('',#112489); +#112489 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#112490 = LINE('',#112491,#112492); +#112491 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#112492 = VECTOR('',#112493,1.); +#112493 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112494 = ORIENTED_EDGE('',*,*,#112495,.F.); +#112495 = EDGE_CURVE('',#111049,#112488,#112496,.T.); +#112496 = LINE('',#112497,#112498); +#112497 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#112498 = VECTOR('',#112499,1.); +#112499 = DIRECTION('',(0.,-0.,-1.)); +#112500 = ORIENTED_EDGE('',*,*,#111056,.F.); +#112501 = PLANE('',#112502); +#112502 = AXIS2_PLACEMENT_3D('',#112503,#112504,#112505); +#112503 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#112504 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112505 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112506 = ADVANCED_FACE('',(#112507),#112550,.F.); +#112507 = FACE_BOUND('',#112508,.F.); +#112508 = EDGE_LOOP('',(#112509,#112510,#112511,#112519,#112527,#112535, + #112543,#112549)); +#112509 = ORIENTED_EDGE('',*,*,#111073,.F.); +#112510 = ORIENTED_EDGE('',*,*,#112495,.T.); +#112511 = ORIENTED_EDGE('',*,*,#112512,.T.); +#112512 = EDGE_CURVE('',#112488,#112513,#112515,.T.); +#112513 = VERTEX_POINT('',#112514); +#112514 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#112515 = LINE('',#112516,#112517); +#112516 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#112517 = VECTOR('',#112518,1.); +#112518 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112519 = ORIENTED_EDGE('',*,*,#112520,.F.); +#112520 = EDGE_CURVE('',#112521,#112513,#112523,.T.); +#112521 = VERTEX_POINT('',#112522); +#112522 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#112523 = LINE('',#112524,#112525); +#112524 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#112525 = VECTOR('',#112526,1.); +#112526 = DIRECTION('',(-0.,0.,-1.)); +#112527 = ORIENTED_EDGE('',*,*,#112528,.T.); +#112528 = EDGE_CURVE('',#112521,#112529,#112531,.T.); +#112529 = VERTEX_POINT('',#112530); +#112530 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#112531 = LINE('',#112532,#112533); +#112532 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#112533 = VECTOR('',#112534,1.); +#112534 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112535 = ORIENTED_EDGE('',*,*,#112536,.T.); +#112536 = EDGE_CURVE('',#112529,#112537,#112539,.T.); +#112537 = VERTEX_POINT('',#112538); +#112538 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#112539 = LINE('',#112540,#112541); +#112540 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#112541 = VECTOR('',#112542,1.); +#112542 = DIRECTION('',(-0.,0.,-1.)); +#112543 = ORIENTED_EDGE('',*,*,#112544,.T.); +#112544 = EDGE_CURVE('',#112537,#112400,#112545,.T.); +#112545 = LINE('',#112546,#112547); +#112546 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#112547 = VECTOR('',#112548,1.); +#112548 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112549 = ORIENTED_EDGE('',*,*,#112399,.F.); +#112550 = PLANE('',#112551); +#112551 = AXIS2_PLACEMENT_3D('',#112552,#112553,#112554); +#112552 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#112553 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112554 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112555 = ADVANCED_FACE('',(#112556),#112581,.F.); +#112556 = FACE_BOUND('',#112557,.F.); +#112557 = EDGE_LOOP('',(#112558,#112566,#112574,#112580)); +#112558 = ORIENTED_EDGE('',*,*,#112559,.T.); +#112559 = EDGE_CURVE('',#111088,#112560,#112562,.T.); +#112560 = VERTEX_POINT('',#112561); +#112561 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#112562 = LINE('',#112563,#112564); +#112563 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#112564 = VECTOR('',#112565,1.); +#112565 = DIRECTION('',(0.,-0.,-1.)); +#112566 = ORIENTED_EDGE('',*,*,#112567,.T.); +#112567 = EDGE_CURVE('',#112560,#112568,#112570,.T.); +#112568 = VERTEX_POINT('',#112569); +#112569 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#112570 = LINE('',#112571,#112572); +#112571 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#112572 = VECTOR('',#112573,1.); +#112573 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112574 = ORIENTED_EDGE('',*,*,#112575,.F.); +#112575 = EDGE_CURVE('',#111097,#112568,#112576,.T.); +#112576 = LINE('',#112577,#112578); +#112577 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#112578 = VECTOR('',#112579,1.); +#112579 = DIRECTION('',(0.,-0.,-1.)); +#112580 = ORIENTED_EDGE('',*,*,#111104,.F.); +#112581 = PLANE('',#112582); +#112582 = AXIS2_PLACEMENT_3D('',#112583,#112584,#112585); +#112583 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#112584 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112585 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112586 = ADVANCED_FACE('',(#112587),#112637,.F.); +#112587 = FACE_BOUND('',#112588,.F.); +#112588 = EDGE_LOOP('',(#112589,#112590,#112591,#112599,#112607,#112615, + #112623,#112631)); +#112589 = ORIENTED_EDGE('',*,*,#111128,.F.); +#112590 = ORIENTED_EDGE('',*,*,#112575,.T.); +#112591 = ORIENTED_EDGE('',*,*,#112592,.T.); +#112592 = EDGE_CURVE('',#112568,#112593,#112595,.T.); +#112593 = VERTEX_POINT('',#112594); +#112594 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#112595 = LINE('',#112596,#112597); +#112596 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#112597 = VECTOR('',#112598,1.); +#112598 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112599 = ORIENTED_EDGE('',*,*,#112600,.T.); +#112600 = EDGE_CURVE('',#112593,#112601,#112603,.T.); +#112601 = VERTEX_POINT('',#112602); +#112602 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#112603 = LINE('',#112604,#112605); +#112604 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#112605 = VECTOR('',#112606,1.); +#112606 = DIRECTION('',(0.,-0.,1.)); +#112607 = ORIENTED_EDGE('',*,*,#112608,.F.); +#112608 = EDGE_CURVE('',#112609,#112601,#112611,.T.); +#112609 = VERTEX_POINT('',#112610); +#112610 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#112611 = LINE('',#112612,#112613); +#112612 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#112613 = VECTOR('',#112614,1.); +#112614 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112615 = ORIENTED_EDGE('',*,*,#112616,.F.); +#112616 = EDGE_CURVE('',#112617,#112609,#112619,.T.); +#112617 = VERTEX_POINT('',#112618); +#112618 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#112619 = LINE('',#112620,#112621); +#112620 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#112621 = VECTOR('',#112622,1.); +#112622 = DIRECTION('',(0.,-0.,1.)); +#112623 = ORIENTED_EDGE('',*,*,#112624,.T.); +#112624 = EDGE_CURVE('',#112617,#112625,#112627,.T.); +#112625 = VERTEX_POINT('',#112626); +#112626 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#112627 = LINE('',#112628,#112629); +#112628 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#112629 = VECTOR('',#112630,1.); +#112630 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112631 = ORIENTED_EDGE('',*,*,#112632,.F.); +#112632 = EDGE_CURVE('',#111121,#112625,#112633,.T.); +#112633 = LINE('',#112634,#112635); +#112634 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#112635 = VECTOR('',#112636,1.); +#112636 = DIRECTION('',(0.,-0.,-1.)); +#112637 = PLANE('',#112638); +#112638 = AXIS2_PLACEMENT_3D('',#112639,#112640,#112641); +#112639 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#112640 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112641 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112642 = ADVANCED_FACE('',(#112643),#112661,.F.); +#112643 = FACE_BOUND('',#112644,.F.); +#112644 = EDGE_LOOP('',(#112645,#112646,#112654,#112660)); +#112645 = ORIENTED_EDGE('',*,*,#112632,.T.); +#112646 = ORIENTED_EDGE('',*,*,#112647,.T.); +#112647 = EDGE_CURVE('',#112625,#112648,#112650,.T.); +#112648 = VERTEX_POINT('',#112649); +#112649 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#112650 = LINE('',#112651,#112652); +#112651 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#112652 = VECTOR('',#112653,1.); +#112653 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112654 = ORIENTED_EDGE('',*,*,#112655,.F.); +#112655 = EDGE_CURVE('',#111145,#112648,#112656,.T.); +#112656 = LINE('',#112657,#112658); +#112657 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#112658 = VECTOR('',#112659,1.); +#112659 = DIRECTION('',(0.,-0.,-1.)); +#112660 = ORIENTED_EDGE('',*,*,#111152,.F.); +#112661 = PLANE('',#112662); +#112662 = AXIS2_PLACEMENT_3D('',#112663,#112664,#112665); +#112663 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#112664 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112665 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112666 = ADVANCED_FACE('',(#112667),#112710,.F.); +#112667 = FACE_BOUND('',#112668,.F.); +#112668 = EDGE_LOOP('',(#112669,#112670,#112671,#112679,#112687,#112695, + #112703,#112709)); +#112669 = ORIENTED_EDGE('',*,*,#111169,.F.); +#112670 = ORIENTED_EDGE('',*,*,#112655,.T.); +#112671 = ORIENTED_EDGE('',*,*,#112672,.T.); +#112672 = EDGE_CURVE('',#112648,#112673,#112675,.T.); +#112673 = VERTEX_POINT('',#112674); +#112674 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#112675 = LINE('',#112676,#112677); +#112676 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#112677 = VECTOR('',#112678,1.); +#112678 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112679 = ORIENTED_EDGE('',*,*,#112680,.F.); +#112680 = EDGE_CURVE('',#112681,#112673,#112683,.T.); +#112681 = VERTEX_POINT('',#112682); +#112682 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#112683 = LINE('',#112684,#112685); +#112684 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#112685 = VECTOR('',#112686,1.); +#112686 = DIRECTION('',(-0.,0.,-1.)); +#112687 = ORIENTED_EDGE('',*,*,#112688,.T.); +#112688 = EDGE_CURVE('',#112681,#112689,#112691,.T.); +#112689 = VERTEX_POINT('',#112690); +#112690 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#112691 = LINE('',#112692,#112693); +#112692 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#112693 = VECTOR('',#112694,1.); +#112694 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112695 = ORIENTED_EDGE('',*,*,#112696,.T.); +#112696 = EDGE_CURVE('',#112689,#112697,#112699,.T.); +#112697 = VERTEX_POINT('',#112698); +#112698 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#112699 = LINE('',#112700,#112701); +#112700 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#112701 = VECTOR('',#112702,1.); +#112702 = DIRECTION('',(-0.,0.,-1.)); +#112703 = ORIENTED_EDGE('',*,*,#112704,.T.); +#112704 = EDGE_CURVE('',#112697,#112560,#112705,.T.); +#112705 = LINE('',#112706,#112707); +#112706 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#112707 = VECTOR('',#112708,1.); +#112708 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112709 = ORIENTED_EDGE('',*,*,#112559,.F.); +#112710 = PLANE('',#112711); +#112711 = AXIS2_PLACEMENT_3D('',#112712,#112713,#112714); +#112712 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#112713 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112714 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112715 = ADVANCED_FACE('',(#112716),#112741,.F.); +#112716 = FACE_BOUND('',#112717,.F.); +#112717 = EDGE_LOOP('',(#112718,#112726,#112734,#112740)); +#112718 = ORIENTED_EDGE('',*,*,#112719,.T.); +#112719 = EDGE_CURVE('',#111184,#112720,#112722,.T.); +#112720 = VERTEX_POINT('',#112721); +#112721 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#112722 = LINE('',#112723,#112724); +#112723 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#112724 = VECTOR('',#112725,1.); +#112725 = DIRECTION('',(0.,-0.,-1.)); +#112726 = ORIENTED_EDGE('',*,*,#112727,.T.); +#112727 = EDGE_CURVE('',#112720,#112728,#112730,.T.); +#112728 = VERTEX_POINT('',#112729); +#112729 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#112730 = LINE('',#112731,#112732); +#112731 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#112732 = VECTOR('',#112733,1.); +#112733 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112734 = ORIENTED_EDGE('',*,*,#112735,.F.); +#112735 = EDGE_CURVE('',#111193,#112728,#112736,.T.); +#112736 = LINE('',#112737,#112738); +#112737 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#112738 = VECTOR('',#112739,1.); +#112739 = DIRECTION('',(0.,-0.,-1.)); +#112740 = ORIENTED_EDGE('',*,*,#111200,.F.); +#112741 = PLANE('',#112742); +#112742 = AXIS2_PLACEMENT_3D('',#112743,#112744,#112745); +#112743 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#112744 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112745 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112746 = ADVANCED_FACE('',(#112747),#112797,.F.); +#112747 = FACE_BOUND('',#112748,.F.); +#112748 = EDGE_LOOP('',(#112749,#112750,#112751,#112759,#112767,#112775, + #112783,#112791)); +#112749 = ORIENTED_EDGE('',*,*,#111224,.F.); +#112750 = ORIENTED_EDGE('',*,*,#112735,.T.); +#112751 = ORIENTED_EDGE('',*,*,#112752,.T.); +#112752 = EDGE_CURVE('',#112728,#112753,#112755,.T.); +#112753 = VERTEX_POINT('',#112754); +#112754 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#112755 = LINE('',#112756,#112757); +#112756 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#112757 = VECTOR('',#112758,1.); +#112758 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112759 = ORIENTED_EDGE('',*,*,#112760,.T.); +#112760 = EDGE_CURVE('',#112753,#112761,#112763,.T.); +#112761 = VERTEX_POINT('',#112762); +#112762 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#112763 = LINE('',#112764,#112765); +#112764 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#112765 = VECTOR('',#112766,1.); +#112766 = DIRECTION('',(0.,-0.,1.)); +#112767 = ORIENTED_EDGE('',*,*,#112768,.F.); +#112768 = EDGE_CURVE('',#112769,#112761,#112771,.T.); +#112769 = VERTEX_POINT('',#112770); +#112770 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#112771 = LINE('',#112772,#112773); +#112772 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#112773 = VECTOR('',#112774,1.); +#112774 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112775 = ORIENTED_EDGE('',*,*,#112776,.F.); +#112776 = EDGE_CURVE('',#112777,#112769,#112779,.T.); +#112777 = VERTEX_POINT('',#112778); +#112778 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#112779 = LINE('',#112780,#112781); +#112780 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#112781 = VECTOR('',#112782,1.); +#112782 = DIRECTION('',(0.,-0.,1.)); +#112783 = ORIENTED_EDGE('',*,*,#112784,.T.); +#112784 = EDGE_CURVE('',#112777,#112785,#112787,.T.); +#112785 = VERTEX_POINT('',#112786); +#112786 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#112787 = LINE('',#112788,#112789); +#112788 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#112789 = VECTOR('',#112790,1.); +#112790 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112791 = ORIENTED_EDGE('',*,*,#112792,.F.); +#112792 = EDGE_CURVE('',#111217,#112785,#112793,.T.); +#112793 = LINE('',#112794,#112795); +#112794 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#112795 = VECTOR('',#112796,1.); +#112796 = DIRECTION('',(0.,-0.,-1.)); +#112797 = PLANE('',#112798); +#112798 = AXIS2_PLACEMENT_3D('',#112799,#112800,#112801); +#112799 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#112800 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112801 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112802 = ADVANCED_FACE('',(#112803),#112821,.F.); +#112803 = FACE_BOUND('',#112804,.F.); +#112804 = EDGE_LOOP('',(#112805,#112806,#112814,#112820)); +#112805 = ORIENTED_EDGE('',*,*,#112792,.T.); +#112806 = ORIENTED_EDGE('',*,*,#112807,.T.); +#112807 = EDGE_CURVE('',#112785,#112808,#112810,.T.); +#112808 = VERTEX_POINT('',#112809); +#112809 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#112810 = LINE('',#112811,#112812); +#112811 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#112812 = VECTOR('',#112813,1.); +#112813 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112814 = ORIENTED_EDGE('',*,*,#112815,.F.); +#112815 = EDGE_CURVE('',#111241,#112808,#112816,.T.); +#112816 = LINE('',#112817,#112818); +#112817 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#112818 = VECTOR('',#112819,1.); +#112819 = DIRECTION('',(0.,-0.,-1.)); +#112820 = ORIENTED_EDGE('',*,*,#111248,.F.); +#112821 = PLANE('',#112822); +#112822 = AXIS2_PLACEMENT_3D('',#112823,#112824,#112825); +#112823 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#112824 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112825 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112826 = ADVANCED_FACE('',(#112827),#112870,.F.); +#112827 = FACE_BOUND('',#112828,.F.); +#112828 = EDGE_LOOP('',(#112829,#112830,#112831,#112839,#112847,#112855, + #112863,#112869)); +#112829 = ORIENTED_EDGE('',*,*,#111265,.F.); +#112830 = ORIENTED_EDGE('',*,*,#112815,.T.); +#112831 = ORIENTED_EDGE('',*,*,#112832,.T.); +#112832 = EDGE_CURVE('',#112808,#112833,#112835,.T.); +#112833 = VERTEX_POINT('',#112834); +#112834 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#112835 = LINE('',#112836,#112837); +#112836 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#112837 = VECTOR('',#112838,1.); +#112838 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112839 = ORIENTED_EDGE('',*,*,#112840,.F.); +#112840 = EDGE_CURVE('',#112841,#112833,#112843,.T.); +#112841 = VERTEX_POINT('',#112842); +#112842 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#112843 = LINE('',#112844,#112845); +#112844 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#112845 = VECTOR('',#112846,1.); +#112846 = DIRECTION('',(-0.,0.,-1.)); +#112847 = ORIENTED_EDGE('',*,*,#112848,.T.); +#112848 = EDGE_CURVE('',#112841,#112849,#112851,.T.); +#112849 = VERTEX_POINT('',#112850); +#112850 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#112851 = LINE('',#112852,#112853); +#112852 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#112853 = VECTOR('',#112854,1.); +#112854 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112855 = ORIENTED_EDGE('',*,*,#112856,.T.); +#112856 = EDGE_CURVE('',#112849,#112857,#112859,.T.); +#112857 = VERTEX_POINT('',#112858); +#112858 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#112859 = LINE('',#112860,#112861); +#112860 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#112861 = VECTOR('',#112862,1.); +#112862 = DIRECTION('',(-0.,0.,-1.)); +#112863 = ORIENTED_EDGE('',*,*,#112864,.T.); +#112864 = EDGE_CURVE('',#112857,#112720,#112865,.T.); +#112865 = LINE('',#112866,#112867); +#112866 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#112867 = VECTOR('',#112868,1.); +#112868 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112869 = ORIENTED_EDGE('',*,*,#112719,.F.); +#112870 = PLANE('',#112871); +#112871 = AXIS2_PLACEMENT_3D('',#112872,#112873,#112874); +#112872 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#112873 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112874 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112875 = ADVANCED_FACE('',(#112876),#112901,.F.); +#112876 = FACE_BOUND('',#112877,.F.); +#112877 = EDGE_LOOP('',(#112878,#112886,#112894,#112900)); +#112878 = ORIENTED_EDGE('',*,*,#112879,.T.); +#112879 = EDGE_CURVE('',#111280,#112880,#112882,.T.); +#112880 = VERTEX_POINT('',#112881); +#112881 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#112882 = LINE('',#112883,#112884); +#112883 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#112884 = VECTOR('',#112885,1.); +#112885 = DIRECTION('',(0.,-0.,-1.)); +#112886 = ORIENTED_EDGE('',*,*,#112887,.T.); +#112887 = EDGE_CURVE('',#112880,#112888,#112890,.T.); +#112888 = VERTEX_POINT('',#112889); +#112889 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#112890 = LINE('',#112891,#112892); +#112891 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#112892 = VECTOR('',#112893,1.); +#112893 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112894 = ORIENTED_EDGE('',*,*,#112895,.F.); +#112895 = EDGE_CURVE('',#111289,#112888,#112896,.T.); +#112896 = LINE('',#112897,#112898); +#112897 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#112898 = VECTOR('',#112899,1.); +#112899 = DIRECTION('',(0.,-0.,-1.)); +#112900 = ORIENTED_EDGE('',*,*,#111296,.F.); +#112901 = PLANE('',#112902); +#112902 = AXIS2_PLACEMENT_3D('',#112903,#112904,#112905); +#112903 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#112904 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112905 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112906 = ADVANCED_FACE('',(#112907),#112957,.F.); +#112907 = FACE_BOUND('',#112908,.F.); +#112908 = EDGE_LOOP('',(#112909,#112910,#112911,#112919,#112927,#112935, + #112943,#112951)); +#112909 = ORIENTED_EDGE('',*,*,#111320,.F.); +#112910 = ORIENTED_EDGE('',*,*,#112895,.T.); +#112911 = ORIENTED_EDGE('',*,*,#112912,.T.); +#112912 = EDGE_CURVE('',#112888,#112913,#112915,.T.); +#112913 = VERTEX_POINT('',#112914); +#112914 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#112915 = LINE('',#112916,#112917); +#112916 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#112917 = VECTOR('',#112918,1.); +#112918 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112919 = ORIENTED_EDGE('',*,*,#112920,.T.); +#112920 = EDGE_CURVE('',#112913,#112921,#112923,.T.); +#112921 = VERTEX_POINT('',#112922); +#112922 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#112923 = LINE('',#112924,#112925); +#112924 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#112925 = VECTOR('',#112926,1.); +#112926 = DIRECTION('',(0.,-0.,1.)); +#112927 = ORIENTED_EDGE('',*,*,#112928,.F.); +#112928 = EDGE_CURVE('',#112929,#112921,#112931,.T.); +#112929 = VERTEX_POINT('',#112930); +#112930 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#112931 = LINE('',#112932,#112933); +#112932 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#112933 = VECTOR('',#112934,1.); +#112934 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112935 = ORIENTED_EDGE('',*,*,#112936,.F.); +#112936 = EDGE_CURVE('',#112937,#112929,#112939,.T.); +#112937 = VERTEX_POINT('',#112938); +#112938 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#112939 = LINE('',#112940,#112941); +#112940 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#112941 = VECTOR('',#112942,1.); +#112942 = DIRECTION('',(0.,-0.,1.)); +#112943 = ORIENTED_EDGE('',*,*,#112944,.T.); +#112944 = EDGE_CURVE('',#112937,#112945,#112947,.T.); +#112945 = VERTEX_POINT('',#112946); +#112946 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#112947 = LINE('',#112948,#112949); +#112948 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#112949 = VECTOR('',#112950,1.); +#112950 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112951 = ORIENTED_EDGE('',*,*,#112952,.F.); +#112952 = EDGE_CURVE('',#111313,#112945,#112953,.T.); +#112953 = LINE('',#112954,#112955); +#112954 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#112955 = VECTOR('',#112956,1.); +#112956 = DIRECTION('',(0.,-0.,-1.)); +#112957 = PLANE('',#112958); +#112958 = AXIS2_PLACEMENT_3D('',#112959,#112960,#112961); +#112959 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#112960 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#112961 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112962 = ADVANCED_FACE('',(#112963),#112981,.F.); +#112963 = FACE_BOUND('',#112964,.F.); +#112964 = EDGE_LOOP('',(#112965,#112966,#112974,#112980)); +#112965 = ORIENTED_EDGE('',*,*,#112952,.T.); +#112966 = ORIENTED_EDGE('',*,*,#112967,.T.); +#112967 = EDGE_CURVE('',#112945,#112968,#112970,.T.); +#112968 = VERTEX_POINT('',#112969); +#112969 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#112970 = LINE('',#112971,#112972); +#112971 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#112972 = VECTOR('',#112973,1.); +#112973 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112974 = ORIENTED_EDGE('',*,*,#112975,.F.); +#112975 = EDGE_CURVE('',#111337,#112968,#112976,.T.); +#112976 = LINE('',#112977,#112978); +#112977 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#112978 = VECTOR('',#112979,1.); +#112979 = DIRECTION('',(0.,-0.,-1.)); +#112980 = ORIENTED_EDGE('',*,*,#111344,.F.); +#112981 = PLANE('',#112982); +#112982 = AXIS2_PLACEMENT_3D('',#112983,#112984,#112985); +#112983 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#112984 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#112985 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#112986 = ADVANCED_FACE('',(#112987),#113030,.F.); +#112987 = FACE_BOUND('',#112988,.F.); +#112988 = EDGE_LOOP('',(#112989,#112990,#112991,#112999,#113007,#113015, + #113023,#113029)); +#112989 = ORIENTED_EDGE('',*,*,#111361,.F.); +#112990 = ORIENTED_EDGE('',*,*,#112975,.T.); +#112991 = ORIENTED_EDGE('',*,*,#112992,.T.); +#112992 = EDGE_CURVE('',#112968,#112993,#112995,.T.); +#112993 = VERTEX_POINT('',#112994); +#112994 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#112995 = LINE('',#112996,#112997); +#112996 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#112997 = VECTOR('',#112998,1.); +#112998 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#112999 = ORIENTED_EDGE('',*,*,#113000,.F.); +#113000 = EDGE_CURVE('',#113001,#112993,#113003,.T.); +#113001 = VERTEX_POINT('',#113002); +#113002 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#113003 = LINE('',#113004,#113005); +#113004 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#113005 = VECTOR('',#113006,1.); +#113006 = DIRECTION('',(-0.,0.,-1.)); +#113007 = ORIENTED_EDGE('',*,*,#113008,.T.); +#113008 = EDGE_CURVE('',#113001,#113009,#113011,.T.); +#113009 = VERTEX_POINT('',#113010); +#113010 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#113011 = LINE('',#113012,#113013); +#113012 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#113013 = VECTOR('',#113014,1.); +#113014 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113015 = ORIENTED_EDGE('',*,*,#113016,.T.); +#113016 = EDGE_CURVE('',#113009,#113017,#113019,.T.); +#113017 = VERTEX_POINT('',#113018); +#113018 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#113019 = LINE('',#113020,#113021); +#113020 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#113021 = VECTOR('',#113022,1.); +#113022 = DIRECTION('',(-0.,0.,-1.)); +#113023 = ORIENTED_EDGE('',*,*,#113024,.T.); +#113024 = EDGE_CURVE('',#113017,#112880,#113025,.T.); +#113025 = LINE('',#113026,#113027); +#113026 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#113027 = VECTOR('',#113028,1.); +#113028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113029 = ORIENTED_EDGE('',*,*,#112879,.F.); +#113030 = PLANE('',#113031); +#113031 = AXIS2_PLACEMENT_3D('',#113032,#113033,#113034); +#113032 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#113033 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113034 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113035 = ADVANCED_FACE('',(#113036),#113061,.F.); +#113036 = FACE_BOUND('',#113037,.F.); +#113037 = EDGE_LOOP('',(#113038,#113046,#113054,#113060)); +#113038 = ORIENTED_EDGE('',*,*,#113039,.T.); +#113039 = EDGE_CURVE('',#111376,#113040,#113042,.T.); +#113040 = VERTEX_POINT('',#113041); +#113041 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#113042 = LINE('',#113043,#113044); +#113043 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#113044 = VECTOR('',#113045,1.); +#113045 = DIRECTION('',(0.,-0.,-1.)); +#113046 = ORIENTED_EDGE('',*,*,#113047,.T.); +#113047 = EDGE_CURVE('',#113040,#113048,#113050,.T.); +#113048 = VERTEX_POINT('',#113049); +#113049 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#113050 = LINE('',#113051,#113052); +#113051 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#113052 = VECTOR('',#113053,1.); +#113053 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113054 = ORIENTED_EDGE('',*,*,#113055,.F.); +#113055 = EDGE_CURVE('',#111385,#113048,#113056,.T.); +#113056 = LINE('',#113057,#113058); +#113057 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#113058 = VECTOR('',#113059,1.); +#113059 = DIRECTION('',(0.,-0.,-1.)); +#113060 = ORIENTED_EDGE('',*,*,#111392,.F.); +#113061 = PLANE('',#113062); +#113062 = AXIS2_PLACEMENT_3D('',#113063,#113064,#113065); +#113063 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#113064 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113065 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113066 = ADVANCED_FACE('',(#113067),#113117,.F.); +#113067 = FACE_BOUND('',#113068,.F.); +#113068 = EDGE_LOOP('',(#113069,#113070,#113071,#113079,#113087,#113095, + #113103,#113111)); +#113069 = ORIENTED_EDGE('',*,*,#111416,.F.); +#113070 = ORIENTED_EDGE('',*,*,#113055,.T.); +#113071 = ORIENTED_EDGE('',*,*,#113072,.T.); +#113072 = EDGE_CURVE('',#113048,#113073,#113075,.T.); +#113073 = VERTEX_POINT('',#113074); +#113074 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#113075 = LINE('',#113076,#113077); +#113076 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#113077 = VECTOR('',#113078,1.); +#113078 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113079 = ORIENTED_EDGE('',*,*,#113080,.T.); +#113080 = EDGE_CURVE('',#113073,#113081,#113083,.T.); +#113081 = VERTEX_POINT('',#113082); +#113082 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#113083 = LINE('',#113084,#113085); +#113084 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#113085 = VECTOR('',#113086,1.); +#113086 = DIRECTION('',(0.,-0.,1.)); +#113087 = ORIENTED_EDGE('',*,*,#113088,.F.); +#113088 = EDGE_CURVE('',#113089,#113081,#113091,.T.); +#113089 = VERTEX_POINT('',#113090); +#113090 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#113091 = LINE('',#113092,#113093); +#113092 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#113093 = VECTOR('',#113094,1.); +#113094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113095 = ORIENTED_EDGE('',*,*,#113096,.F.); +#113096 = EDGE_CURVE('',#113097,#113089,#113099,.T.); +#113097 = VERTEX_POINT('',#113098); +#113098 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#113099 = LINE('',#113100,#113101); +#113100 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#113101 = VECTOR('',#113102,1.); +#113102 = DIRECTION('',(0.,-0.,1.)); +#113103 = ORIENTED_EDGE('',*,*,#113104,.T.); +#113104 = EDGE_CURVE('',#113097,#113105,#113107,.T.); +#113105 = VERTEX_POINT('',#113106); +#113106 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#113107 = LINE('',#113108,#113109); +#113108 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#113109 = VECTOR('',#113110,1.); +#113110 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113111 = ORIENTED_EDGE('',*,*,#113112,.F.); +#113112 = EDGE_CURVE('',#111409,#113105,#113113,.T.); +#113113 = LINE('',#113114,#113115); +#113114 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#113115 = VECTOR('',#113116,1.); +#113116 = DIRECTION('',(0.,-0.,-1.)); +#113117 = PLANE('',#113118); +#113118 = AXIS2_PLACEMENT_3D('',#113119,#113120,#113121); +#113119 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#113120 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113121 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113122 = ADVANCED_FACE('',(#113123),#113141,.F.); +#113123 = FACE_BOUND('',#113124,.F.); +#113124 = EDGE_LOOP('',(#113125,#113126,#113134,#113140)); +#113125 = ORIENTED_EDGE('',*,*,#113112,.T.); +#113126 = ORIENTED_EDGE('',*,*,#113127,.T.); +#113127 = EDGE_CURVE('',#113105,#113128,#113130,.T.); +#113128 = VERTEX_POINT('',#113129); +#113129 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#113130 = LINE('',#113131,#113132); +#113131 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#113132 = VECTOR('',#113133,1.); +#113133 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113134 = ORIENTED_EDGE('',*,*,#113135,.F.); +#113135 = EDGE_CURVE('',#111433,#113128,#113136,.T.); +#113136 = LINE('',#113137,#113138); +#113137 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#113138 = VECTOR('',#113139,1.); +#113139 = DIRECTION('',(0.,-0.,-1.)); +#113140 = ORIENTED_EDGE('',*,*,#111440,.F.); +#113141 = PLANE('',#113142); +#113142 = AXIS2_PLACEMENT_3D('',#113143,#113144,#113145); +#113143 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#113144 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113145 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113146 = ADVANCED_FACE('',(#113147),#113190,.F.); +#113147 = FACE_BOUND('',#113148,.F.); +#113148 = EDGE_LOOP('',(#113149,#113150,#113151,#113159,#113167,#113175, + #113183,#113189)); +#113149 = ORIENTED_EDGE('',*,*,#111457,.F.); +#113150 = ORIENTED_EDGE('',*,*,#113135,.T.); +#113151 = ORIENTED_EDGE('',*,*,#113152,.T.); +#113152 = EDGE_CURVE('',#113128,#113153,#113155,.T.); +#113153 = VERTEX_POINT('',#113154); +#113154 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#113155 = LINE('',#113156,#113157); +#113156 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#113157 = VECTOR('',#113158,1.); +#113158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113159 = ORIENTED_EDGE('',*,*,#113160,.F.); +#113160 = EDGE_CURVE('',#113161,#113153,#113163,.T.); +#113161 = VERTEX_POINT('',#113162); +#113162 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#113163 = LINE('',#113164,#113165); +#113164 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#113165 = VECTOR('',#113166,1.); +#113166 = DIRECTION('',(-0.,0.,-1.)); +#113167 = ORIENTED_EDGE('',*,*,#113168,.T.); +#113168 = EDGE_CURVE('',#113161,#113169,#113171,.T.); +#113169 = VERTEX_POINT('',#113170); +#113170 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#113171 = LINE('',#113172,#113173); +#113172 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#113173 = VECTOR('',#113174,1.); +#113174 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113175 = ORIENTED_EDGE('',*,*,#113176,.T.); +#113176 = EDGE_CURVE('',#113169,#113177,#113179,.T.); +#113177 = VERTEX_POINT('',#113178); +#113178 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#113179 = LINE('',#113180,#113181); +#113180 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#113181 = VECTOR('',#113182,1.); +#113182 = DIRECTION('',(-0.,0.,-1.)); +#113183 = ORIENTED_EDGE('',*,*,#113184,.T.); +#113184 = EDGE_CURVE('',#113177,#113040,#113185,.T.); +#113185 = LINE('',#113186,#113187); +#113186 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#113187 = VECTOR('',#113188,1.); +#113188 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113189 = ORIENTED_EDGE('',*,*,#113039,.F.); +#113190 = PLANE('',#113191); +#113191 = AXIS2_PLACEMENT_3D('',#113192,#113193,#113194); +#113192 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#113193 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113195 = ADVANCED_FACE('',(#113196),#113207,.T.); +#113196 = FACE_BOUND('',#113197,.T.); +#113197 = EDGE_LOOP('',(#113198,#113204,#113205,#113206)); +#113198 = ORIENTED_EDGE('',*,*,#113199,.T.); +#113199 = EDGE_CURVE('',#111553,#111489,#113200,.T.); +#113200 = LINE('',#113201,#113202); +#113201 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#113202 = VECTOR('',#113203,1.); +#113203 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113204 = ORIENTED_EDGE('',*,*,#111488,.T.); +#113205 = ORIENTED_EDGE('',*,*,#111473,.F.); +#113206 = ORIENTED_EDGE('',*,*,#111552,.F.); +#113207 = PLANE('',#113208); +#113208 = AXIS2_PLACEMENT_3D('',#113209,#113210,#113211); +#113209 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#113210 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113211 = DIRECTION('',(0.,0.,1.)); +#113212 = ADVANCED_FACE('',(#113213),#113224,.T.); +#113213 = FACE_BOUND('',#113214,.T.); +#113214 = EDGE_LOOP('',(#113215,#113221,#113222,#113223)); +#113215 = ORIENTED_EDGE('',*,*,#113216,.T.); +#113216 = EDGE_CURVE('',#111578,#111514,#113217,.T.); +#113217 = LINE('',#113218,#113219); +#113218 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#113219 = VECTOR('',#113220,1.); +#113220 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113221 = ORIENTED_EDGE('',*,*,#111521,.T.); +#113222 = ORIENTED_EDGE('',*,*,#113199,.F.); +#113223 = ORIENTED_EDGE('',*,*,#111585,.F.); +#113224 = PLANE('',#113225); +#113225 = AXIS2_PLACEMENT_3D('',#113226,#113227,#113228); +#113226 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#113227 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113228 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113229 = ADVANCED_FACE('',(#113230),#113241,.T.); +#113230 = FACE_BOUND('',#113231,.T.); +#113231 = EDGE_LOOP('',(#113232,#113238,#113239,#113240)); +#113232 = ORIENTED_EDGE('',*,*,#113233,.T.); +#113233 = EDGE_CURVE('',#111570,#111506,#113234,.T.); +#113234 = LINE('',#113235,#113236); +#113235 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#113236 = VECTOR('',#113237,1.); +#113237 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113238 = ORIENTED_EDGE('',*,*,#111513,.T.); +#113239 = ORIENTED_EDGE('',*,*,#113216,.F.); +#113240 = ORIENTED_EDGE('',*,*,#111577,.T.); +#113241 = PLANE('',#113242); +#113242 = AXIS2_PLACEMENT_3D('',#113243,#113244,#113245); +#113243 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#113244 = DIRECTION('',(0.,-0.,-1.)); +#113245 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113246 = ADVANCED_FACE('',(#113247),#113258,.T.); +#113247 = FACE_BOUND('',#113248,.T.); +#113248 = EDGE_LOOP('',(#113249,#113255,#113256,#113257)); +#113249 = ORIENTED_EDGE('',*,*,#113250,.T.); +#113250 = EDGE_CURVE('',#111562,#111498,#113251,.T.); +#113251 = LINE('',#113252,#113253); +#113252 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#113253 = VECTOR('',#113254,1.); +#113254 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113255 = ORIENTED_EDGE('',*,*,#111505,.T.); +#113256 = ORIENTED_EDGE('',*,*,#113233,.F.); +#113257 = ORIENTED_EDGE('',*,*,#111569,.F.); +#113258 = PLANE('',#113259); +#113259 = AXIS2_PLACEMENT_3D('',#113260,#113261,#113262); +#113260 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#113261 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113262 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113263 = ADVANCED_FACE('',(#113264),#113270,.T.); +#113264 = FACE_BOUND('',#113265,.T.); +#113265 = EDGE_LOOP('',(#113266,#113267,#113268,#113269)); +#113266 = ORIENTED_EDGE('',*,*,#111535,.T.); +#113267 = ORIENTED_EDGE('',*,*,#111497,.T.); +#113268 = ORIENTED_EDGE('',*,*,#113250,.F.); +#113269 = ORIENTED_EDGE('',*,*,#111561,.F.); +#113270 = PLANE('',#113271); +#113271 = AXIS2_PLACEMENT_3D('',#113272,#113273,#113274); +#113272 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#113273 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113274 = DIRECTION('',(0.,0.,-1.)); +#113275 = ADVANCED_FACE('',(#113276),#113287,.T.); +#113276 = FACE_BOUND('',#113277,.T.); +#113277 = EDGE_LOOP('',(#113278,#113284,#113285,#113286)); +#113278 = ORIENTED_EDGE('',*,*,#113279,.T.); +#113279 = EDGE_CURVE('',#111681,#111617,#113280,.T.); +#113280 = LINE('',#113281,#113282); +#113281 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#113282 = VECTOR('',#113283,1.); +#113283 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113284 = ORIENTED_EDGE('',*,*,#111616,.T.); +#113285 = ORIENTED_EDGE('',*,*,#111601,.F.); +#113286 = ORIENTED_EDGE('',*,*,#111680,.F.); +#113287 = PLANE('',#113288); +#113288 = AXIS2_PLACEMENT_3D('',#113289,#113290,#113291); +#113289 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#113290 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113291 = DIRECTION('',(0.,0.,1.)); +#113292 = ADVANCED_FACE('',(#113293),#113304,.T.); +#113293 = FACE_BOUND('',#113294,.T.); +#113294 = EDGE_LOOP('',(#113295,#113301,#113302,#113303)); +#113295 = ORIENTED_EDGE('',*,*,#113296,.T.); +#113296 = EDGE_CURVE('',#111706,#111642,#113297,.T.); +#113297 = LINE('',#113298,#113299); +#113298 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#113299 = VECTOR('',#113300,1.); +#113300 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113301 = ORIENTED_EDGE('',*,*,#111649,.T.); +#113302 = ORIENTED_EDGE('',*,*,#113279,.F.); +#113303 = ORIENTED_EDGE('',*,*,#111713,.F.); +#113304 = PLANE('',#113305); +#113305 = AXIS2_PLACEMENT_3D('',#113306,#113307,#113308); +#113306 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#113307 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113308 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113309 = ADVANCED_FACE('',(#113310),#113321,.T.); +#113310 = FACE_BOUND('',#113311,.T.); +#113311 = EDGE_LOOP('',(#113312,#113318,#113319,#113320)); +#113312 = ORIENTED_EDGE('',*,*,#113313,.T.); +#113313 = EDGE_CURVE('',#111698,#111634,#113314,.T.); +#113314 = LINE('',#113315,#113316); +#113315 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#113316 = VECTOR('',#113317,1.); +#113317 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113318 = ORIENTED_EDGE('',*,*,#111641,.T.); +#113319 = ORIENTED_EDGE('',*,*,#113296,.F.); +#113320 = ORIENTED_EDGE('',*,*,#111705,.T.); +#113321 = PLANE('',#113322); +#113322 = AXIS2_PLACEMENT_3D('',#113323,#113324,#113325); +#113323 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#113324 = DIRECTION('',(0.,-0.,-1.)); +#113325 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113326 = ADVANCED_FACE('',(#113327),#113338,.T.); +#113327 = FACE_BOUND('',#113328,.T.); +#113328 = EDGE_LOOP('',(#113329,#113335,#113336,#113337)); +#113329 = ORIENTED_EDGE('',*,*,#113330,.T.); +#113330 = EDGE_CURVE('',#111690,#111626,#113331,.T.); +#113331 = LINE('',#113332,#113333); +#113332 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#113333 = VECTOR('',#113334,1.); +#113334 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113335 = ORIENTED_EDGE('',*,*,#111633,.T.); +#113336 = ORIENTED_EDGE('',*,*,#113313,.F.); +#113337 = ORIENTED_EDGE('',*,*,#111697,.F.); +#113338 = PLANE('',#113339); +#113339 = AXIS2_PLACEMENT_3D('',#113340,#113341,#113342); +#113340 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#113341 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113342 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113343 = ADVANCED_FACE('',(#113344),#113350,.T.); +#113344 = FACE_BOUND('',#113345,.T.); +#113345 = EDGE_LOOP('',(#113346,#113347,#113348,#113349)); +#113346 = ORIENTED_EDGE('',*,*,#111663,.T.); +#113347 = ORIENTED_EDGE('',*,*,#111625,.T.); +#113348 = ORIENTED_EDGE('',*,*,#113330,.F.); +#113349 = ORIENTED_EDGE('',*,*,#111689,.F.); +#113350 = PLANE('',#113351); +#113351 = AXIS2_PLACEMENT_3D('',#113352,#113353,#113354); +#113352 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#113353 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113354 = DIRECTION('',(0.,0.,-1.)); +#113355 = ADVANCED_FACE('',(#113356),#113367,.T.); +#113356 = FACE_BOUND('',#113357,.T.); +#113357 = EDGE_LOOP('',(#113358,#113364,#113365,#113366)); +#113358 = ORIENTED_EDGE('',*,*,#113359,.T.); +#113359 = EDGE_CURVE('',#111809,#111745,#113360,.T.); +#113360 = LINE('',#113361,#113362); +#113361 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#113362 = VECTOR('',#113363,1.); +#113363 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113364 = ORIENTED_EDGE('',*,*,#111744,.T.); +#113365 = ORIENTED_EDGE('',*,*,#111729,.F.); +#113366 = ORIENTED_EDGE('',*,*,#111808,.F.); +#113367 = PLANE('',#113368); +#113368 = AXIS2_PLACEMENT_3D('',#113369,#113370,#113371); +#113369 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#113370 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113371 = DIRECTION('',(0.,0.,1.)); +#113372 = ADVANCED_FACE('',(#113373),#113384,.T.); +#113373 = FACE_BOUND('',#113374,.T.); +#113374 = EDGE_LOOP('',(#113375,#113381,#113382,#113383)); +#113375 = ORIENTED_EDGE('',*,*,#113376,.T.); +#113376 = EDGE_CURVE('',#111834,#111770,#113377,.T.); +#113377 = LINE('',#113378,#113379); +#113378 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#113379 = VECTOR('',#113380,1.); +#113380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113381 = ORIENTED_EDGE('',*,*,#111777,.T.); +#113382 = ORIENTED_EDGE('',*,*,#113359,.F.); +#113383 = ORIENTED_EDGE('',*,*,#111841,.F.); +#113384 = PLANE('',#113385); +#113385 = AXIS2_PLACEMENT_3D('',#113386,#113387,#113388); +#113386 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#113387 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113388 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113389 = ADVANCED_FACE('',(#113390),#113401,.T.); +#113390 = FACE_BOUND('',#113391,.T.); +#113391 = EDGE_LOOP('',(#113392,#113398,#113399,#113400)); +#113392 = ORIENTED_EDGE('',*,*,#113393,.T.); +#113393 = EDGE_CURVE('',#111826,#111762,#113394,.T.); +#113394 = LINE('',#113395,#113396); +#113395 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#113396 = VECTOR('',#113397,1.); +#113397 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113398 = ORIENTED_EDGE('',*,*,#111769,.T.); +#113399 = ORIENTED_EDGE('',*,*,#113376,.F.); +#113400 = ORIENTED_EDGE('',*,*,#111833,.T.); +#113401 = PLANE('',#113402); +#113402 = AXIS2_PLACEMENT_3D('',#113403,#113404,#113405); +#113403 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#113404 = DIRECTION('',(0.,-0.,-1.)); +#113405 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113406 = ADVANCED_FACE('',(#113407),#113418,.T.); +#113407 = FACE_BOUND('',#113408,.T.); +#113408 = EDGE_LOOP('',(#113409,#113415,#113416,#113417)); +#113409 = ORIENTED_EDGE('',*,*,#113410,.T.); +#113410 = EDGE_CURVE('',#111818,#111754,#113411,.T.); +#113411 = LINE('',#113412,#113413); +#113412 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#113413 = VECTOR('',#113414,1.); +#113414 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113415 = ORIENTED_EDGE('',*,*,#111761,.T.); +#113416 = ORIENTED_EDGE('',*,*,#113393,.F.); +#113417 = ORIENTED_EDGE('',*,*,#111825,.F.); +#113418 = PLANE('',#113419); +#113419 = AXIS2_PLACEMENT_3D('',#113420,#113421,#113422); +#113420 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#113421 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113422 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113423 = ADVANCED_FACE('',(#113424),#113430,.T.); +#113424 = FACE_BOUND('',#113425,.T.); +#113425 = EDGE_LOOP('',(#113426,#113427,#113428,#113429)); +#113426 = ORIENTED_EDGE('',*,*,#111791,.T.); +#113427 = ORIENTED_EDGE('',*,*,#111753,.T.); +#113428 = ORIENTED_EDGE('',*,*,#113410,.F.); +#113429 = ORIENTED_EDGE('',*,*,#111817,.F.); +#113430 = PLANE('',#113431); +#113431 = AXIS2_PLACEMENT_3D('',#113432,#113433,#113434); +#113432 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#113433 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113434 = DIRECTION('',(0.,0.,-1.)); +#113435 = ADVANCED_FACE('',(#113436),#113447,.T.); +#113436 = FACE_BOUND('',#113437,.T.); +#113437 = EDGE_LOOP('',(#113438,#113444,#113445,#113446)); +#113438 = ORIENTED_EDGE('',*,*,#113439,.T.); +#113439 = EDGE_CURVE('',#111937,#111873,#113440,.T.); +#113440 = LINE('',#113441,#113442); +#113441 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#113442 = VECTOR('',#113443,1.); +#113443 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113444 = ORIENTED_EDGE('',*,*,#111872,.T.); +#113445 = ORIENTED_EDGE('',*,*,#111857,.F.); +#113446 = ORIENTED_EDGE('',*,*,#111936,.F.); +#113447 = PLANE('',#113448); +#113448 = AXIS2_PLACEMENT_3D('',#113449,#113450,#113451); +#113449 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#113450 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113451 = DIRECTION('',(0.,0.,1.)); +#113452 = ADVANCED_FACE('',(#113453),#113464,.T.); +#113453 = FACE_BOUND('',#113454,.T.); +#113454 = EDGE_LOOP('',(#113455,#113461,#113462,#113463)); +#113455 = ORIENTED_EDGE('',*,*,#113456,.T.); +#113456 = EDGE_CURVE('',#111962,#111898,#113457,.T.); +#113457 = LINE('',#113458,#113459); +#113458 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#113459 = VECTOR('',#113460,1.); +#113460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113461 = ORIENTED_EDGE('',*,*,#111905,.T.); +#113462 = ORIENTED_EDGE('',*,*,#113439,.F.); +#113463 = ORIENTED_EDGE('',*,*,#111969,.F.); +#113464 = PLANE('',#113465); +#113465 = AXIS2_PLACEMENT_3D('',#113466,#113467,#113468); +#113466 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#113467 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113468 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113469 = ADVANCED_FACE('',(#113470),#113481,.T.); +#113470 = FACE_BOUND('',#113471,.T.); +#113471 = EDGE_LOOP('',(#113472,#113478,#113479,#113480)); +#113472 = ORIENTED_EDGE('',*,*,#113473,.T.); +#113473 = EDGE_CURVE('',#111954,#111890,#113474,.T.); +#113474 = LINE('',#113475,#113476); +#113475 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#113476 = VECTOR('',#113477,1.); +#113477 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113478 = ORIENTED_EDGE('',*,*,#111897,.T.); +#113479 = ORIENTED_EDGE('',*,*,#113456,.F.); +#113480 = ORIENTED_EDGE('',*,*,#111961,.T.); +#113481 = PLANE('',#113482); +#113482 = AXIS2_PLACEMENT_3D('',#113483,#113484,#113485); +#113483 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#113484 = DIRECTION('',(0.,-0.,-1.)); +#113485 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113486 = ADVANCED_FACE('',(#113487),#113498,.T.); +#113487 = FACE_BOUND('',#113488,.T.); +#113488 = EDGE_LOOP('',(#113489,#113495,#113496,#113497)); +#113489 = ORIENTED_EDGE('',*,*,#113490,.T.); +#113490 = EDGE_CURVE('',#111946,#111882,#113491,.T.); +#113491 = LINE('',#113492,#113493); +#113492 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#113493 = VECTOR('',#113494,1.); +#113494 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113495 = ORIENTED_EDGE('',*,*,#111889,.T.); +#113496 = ORIENTED_EDGE('',*,*,#113473,.F.); +#113497 = ORIENTED_EDGE('',*,*,#111953,.F.); +#113498 = PLANE('',#113499); +#113499 = AXIS2_PLACEMENT_3D('',#113500,#113501,#113502); +#113500 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#113501 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113502 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113503 = ADVANCED_FACE('',(#113504),#113510,.T.); +#113504 = FACE_BOUND('',#113505,.T.); +#113505 = EDGE_LOOP('',(#113506,#113507,#113508,#113509)); +#113506 = ORIENTED_EDGE('',*,*,#111919,.T.); +#113507 = ORIENTED_EDGE('',*,*,#111881,.T.); +#113508 = ORIENTED_EDGE('',*,*,#113490,.F.); +#113509 = ORIENTED_EDGE('',*,*,#111945,.F.); +#113510 = PLANE('',#113511); +#113511 = AXIS2_PLACEMENT_3D('',#113512,#113513,#113514); +#113512 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#113513 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113514 = DIRECTION('',(0.,0.,-1.)); +#113515 = ADVANCED_FACE('',(#113516),#113527,.T.); +#113516 = FACE_BOUND('',#113517,.T.); +#113517 = EDGE_LOOP('',(#113518,#113524,#113525,#113526)); +#113518 = ORIENTED_EDGE('',*,*,#113519,.T.); +#113519 = EDGE_CURVE('',#112065,#112001,#113520,.T.); +#113520 = LINE('',#113521,#113522); +#113521 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#113522 = VECTOR('',#113523,1.); +#113523 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113524 = ORIENTED_EDGE('',*,*,#112000,.T.); +#113525 = ORIENTED_EDGE('',*,*,#111985,.F.); +#113526 = ORIENTED_EDGE('',*,*,#112064,.F.); +#113527 = PLANE('',#113528); +#113528 = AXIS2_PLACEMENT_3D('',#113529,#113530,#113531); +#113529 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#113530 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113531 = DIRECTION('',(0.,0.,1.)); +#113532 = ADVANCED_FACE('',(#113533),#113544,.T.); +#113533 = FACE_BOUND('',#113534,.T.); +#113534 = EDGE_LOOP('',(#113535,#113541,#113542,#113543)); +#113535 = ORIENTED_EDGE('',*,*,#113536,.T.); +#113536 = EDGE_CURVE('',#112090,#112026,#113537,.T.); +#113537 = LINE('',#113538,#113539); +#113538 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#113539 = VECTOR('',#113540,1.); +#113540 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113541 = ORIENTED_EDGE('',*,*,#112033,.T.); +#113542 = ORIENTED_EDGE('',*,*,#113519,.F.); +#113543 = ORIENTED_EDGE('',*,*,#112097,.F.); +#113544 = PLANE('',#113545); +#113545 = AXIS2_PLACEMENT_3D('',#113546,#113547,#113548); +#113546 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#113547 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113548 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113549 = ADVANCED_FACE('',(#113550),#113561,.T.); +#113550 = FACE_BOUND('',#113551,.T.); +#113551 = EDGE_LOOP('',(#113552,#113558,#113559,#113560)); +#113552 = ORIENTED_EDGE('',*,*,#113553,.T.); +#113553 = EDGE_CURVE('',#112082,#112018,#113554,.T.); +#113554 = LINE('',#113555,#113556); +#113555 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#113556 = VECTOR('',#113557,1.); +#113557 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113558 = ORIENTED_EDGE('',*,*,#112025,.T.); +#113559 = ORIENTED_EDGE('',*,*,#113536,.F.); +#113560 = ORIENTED_EDGE('',*,*,#112089,.T.); +#113561 = PLANE('',#113562); +#113562 = AXIS2_PLACEMENT_3D('',#113563,#113564,#113565); +#113563 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#113564 = DIRECTION('',(0.,-0.,-1.)); +#113565 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113566 = ADVANCED_FACE('',(#113567),#113578,.T.); +#113567 = FACE_BOUND('',#113568,.T.); +#113568 = EDGE_LOOP('',(#113569,#113575,#113576,#113577)); +#113569 = ORIENTED_EDGE('',*,*,#113570,.T.); +#113570 = EDGE_CURVE('',#112074,#112010,#113571,.T.); +#113571 = LINE('',#113572,#113573); +#113572 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#113573 = VECTOR('',#113574,1.); +#113574 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113575 = ORIENTED_EDGE('',*,*,#112017,.T.); +#113576 = ORIENTED_EDGE('',*,*,#113553,.F.); +#113577 = ORIENTED_EDGE('',*,*,#112081,.F.); +#113578 = PLANE('',#113579); +#113579 = AXIS2_PLACEMENT_3D('',#113580,#113581,#113582); +#113580 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#113581 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113582 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113583 = ADVANCED_FACE('',(#113584),#113590,.T.); +#113584 = FACE_BOUND('',#113585,.T.); +#113585 = EDGE_LOOP('',(#113586,#113587,#113588,#113589)); +#113586 = ORIENTED_EDGE('',*,*,#112047,.T.); +#113587 = ORIENTED_EDGE('',*,*,#112009,.T.); +#113588 = ORIENTED_EDGE('',*,*,#113570,.F.); +#113589 = ORIENTED_EDGE('',*,*,#112073,.F.); +#113590 = PLANE('',#113591); +#113591 = AXIS2_PLACEMENT_3D('',#113592,#113593,#113594); +#113592 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#113593 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113594 = DIRECTION('',(0.,0.,-1.)); +#113595 = ADVANCED_FACE('',(#113596),#113607,.T.); +#113596 = FACE_BOUND('',#113597,.T.); +#113597 = EDGE_LOOP('',(#113598,#113604,#113605,#113606)); +#113598 = ORIENTED_EDGE('',*,*,#113599,.T.); +#113599 = EDGE_CURVE('',#112193,#112129,#113600,.T.); +#113600 = LINE('',#113601,#113602); +#113601 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#113602 = VECTOR('',#113603,1.); +#113603 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113604 = ORIENTED_EDGE('',*,*,#112128,.T.); +#113605 = ORIENTED_EDGE('',*,*,#112113,.F.); +#113606 = ORIENTED_EDGE('',*,*,#112192,.F.); +#113607 = PLANE('',#113608); +#113608 = AXIS2_PLACEMENT_3D('',#113609,#113610,#113611); +#113609 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#113610 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113611 = DIRECTION('',(0.,0.,1.)); +#113612 = ADVANCED_FACE('',(#113613),#113624,.T.); +#113613 = FACE_BOUND('',#113614,.T.); +#113614 = EDGE_LOOP('',(#113615,#113621,#113622,#113623)); +#113615 = ORIENTED_EDGE('',*,*,#113616,.T.); +#113616 = EDGE_CURVE('',#112218,#112154,#113617,.T.); +#113617 = LINE('',#113618,#113619); +#113618 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#113619 = VECTOR('',#113620,1.); +#113620 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113621 = ORIENTED_EDGE('',*,*,#112161,.T.); +#113622 = ORIENTED_EDGE('',*,*,#113599,.F.); +#113623 = ORIENTED_EDGE('',*,*,#112225,.F.); +#113624 = PLANE('',#113625); +#113625 = AXIS2_PLACEMENT_3D('',#113626,#113627,#113628); +#113626 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#113627 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#113628 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#113629 = ADVANCED_FACE('',(#113630),#113641,.T.); +#113630 = FACE_BOUND('',#113631,.T.); +#113631 = EDGE_LOOP('',(#113632,#113638,#113639,#113640)); +#113632 = ORIENTED_EDGE('',*,*,#113633,.T.); +#113633 = EDGE_CURVE('',#112210,#112146,#113634,.T.); +#113634 = LINE('',#113635,#113636); +#113635 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#113636 = VECTOR('',#113637,1.); +#113637 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113638 = ORIENTED_EDGE('',*,*,#112153,.T.); +#113639 = ORIENTED_EDGE('',*,*,#113616,.F.); +#113640 = ORIENTED_EDGE('',*,*,#112217,.T.); +#113641 = PLANE('',#113642); +#113642 = AXIS2_PLACEMENT_3D('',#113643,#113644,#113645); +#113643 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#113644 = DIRECTION('',(0.,-0.,-1.)); +#113645 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113646 = ADVANCED_FACE('',(#113647),#113658,.T.); +#113647 = FACE_BOUND('',#113648,.T.); +#113648 = EDGE_LOOP('',(#113649,#113655,#113656,#113657)); +#113649 = ORIENTED_EDGE('',*,*,#113650,.T.); +#113650 = EDGE_CURVE('',#112202,#112138,#113651,.T.); +#113651 = LINE('',#113652,#113653); +#113652 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#113653 = VECTOR('',#113654,1.); +#113654 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113655 = ORIENTED_EDGE('',*,*,#112145,.T.); +#113656 = ORIENTED_EDGE('',*,*,#113633,.F.); +#113657 = ORIENTED_EDGE('',*,*,#112209,.F.); +#113658 = PLANE('',#113659); +#113659 = AXIS2_PLACEMENT_3D('',#113660,#113661,#113662); +#113660 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#113661 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#113662 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#113663 = ADVANCED_FACE('',(#113664),#113670,.T.); +#113664 = FACE_BOUND('',#113665,.T.); +#113665 = EDGE_LOOP('',(#113666,#113667,#113668,#113669)); +#113666 = ORIENTED_EDGE('',*,*,#112175,.T.); +#113667 = ORIENTED_EDGE('',*,*,#112137,.T.); +#113668 = ORIENTED_EDGE('',*,*,#113650,.F.); +#113669 = ORIENTED_EDGE('',*,*,#112201,.F.); +#113670 = PLANE('',#113671); +#113671 = AXIS2_PLACEMENT_3D('',#113672,#113673,#113674); +#113672 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#113673 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113674 = DIRECTION('',(0.,0.,-1.)); +#113675 = ADVANCED_FACE('',(#113676),#113687,.T.); +#113676 = FACE_BOUND('',#113677,.T.); +#113677 = EDGE_LOOP('',(#113678,#113679,#113680,#113681)); +#113678 = ORIENTED_EDGE('',*,*,#112384,.T.); +#113679 = ORIENTED_EDGE('',*,*,#112247,.T.); +#113680 = ORIENTED_EDGE('',*,*,#112272,.T.); +#113681 = ORIENTED_EDGE('',*,*,#113682,.T.); +#113682 = EDGE_CURVE('',#112273,#112377,#113683,.T.); +#113683 = LINE('',#113684,#113685); +#113684 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#113685 = VECTOR('',#113686,1.); +#113686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113687 = PLANE('',#113688); +#113688 = AXIS2_PLACEMENT_3D('',#113689,#113690,#113691); +#113689 = CARTESIAN_POINT('',(-1.492093485804E-15,-12.7,0.9)); +#113690 = DIRECTION('',(0.,0.,1.)); +#113691 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113692 = ADVANCED_FACE('',(#113693),#113704,.T.); +#113693 = FACE_BOUND('',#113694,.T.); +#113694 = EDGE_LOOP('',(#113695,#113696,#113702,#113703)); +#113695 = ORIENTED_EDGE('',*,*,#112352,.T.); +#113696 = ORIENTED_EDGE('',*,*,#113697,.F.); +#113697 = EDGE_CURVE('',#112297,#112353,#113698,.T.); +#113698 = LINE('',#113699,#113700); +#113699 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#113700 = VECTOR('',#113701,1.); +#113701 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113702 = ORIENTED_EDGE('',*,*,#112304,.T.); +#113703 = ORIENTED_EDGE('',*,*,#112327,.T.); +#113704 = PLANE('',#113705); +#113705 = AXIS2_PLACEMENT_3D('',#113706,#113707,#113708); +#113706 = CARTESIAN_POINT('',(-1.492093485804E-15,-12.7,0.9)); +#113707 = DIRECTION('',(0.,0.,1.)); +#113708 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113709 = ADVANCED_FACE('',(#113710),#113753,.T.); +#113710 = FACE_BOUND('',#113711,.T.); +#113711 = EDGE_LOOP('',(#113712,#113713,#113721,#113729,#113737,#113745, + #113751,#113752)); +#113712 = ORIENTED_EDGE('',*,*,#112360,.F.); +#113713 = ORIENTED_EDGE('',*,*,#113714,.T.); +#113714 = EDGE_CURVE('',#112361,#113715,#113717,.T.); +#113715 = VERTEX_POINT('',#113716); +#113716 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#113717 = LINE('',#113718,#113719); +#113718 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#113719 = VECTOR('',#113720,1.); +#113720 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113721 = ORIENTED_EDGE('',*,*,#113722,.T.); +#113722 = EDGE_CURVE('',#113715,#113723,#113725,.T.); +#113723 = VERTEX_POINT('',#113724); +#113724 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#113725 = LINE('',#113726,#113727); +#113726 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#113727 = VECTOR('',#113728,1.); +#113728 = DIRECTION('',(0.,0.,-1.)); +#113729 = ORIENTED_EDGE('',*,*,#113730,.T.); +#113730 = EDGE_CURVE('',#113723,#113731,#113733,.T.); +#113731 = VERTEX_POINT('',#113732); +#113732 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#113733 = LINE('',#113734,#113735); +#113734 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#113735 = VECTOR('',#113736,1.); +#113736 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113737 = ORIENTED_EDGE('',*,*,#113738,.T.); +#113738 = EDGE_CURVE('',#113731,#113739,#113741,.T.); +#113739 = VERTEX_POINT('',#113740); +#113740 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113741 = LINE('',#113742,#113743); +#113742 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#113743 = VECTOR('',#113744,1.); +#113744 = DIRECTION('',(0.,0.,1.)); +#113745 = ORIENTED_EDGE('',*,*,#113746,.T.); +#113746 = EDGE_CURVE('',#113739,#112289,#113747,.T.); +#113747 = LINE('',#113748,#113749); +#113748 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113749 = VECTOR('',#113750,1.); +#113750 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113751 = ORIENTED_EDGE('',*,*,#112296,.F.); +#113752 = ORIENTED_EDGE('',*,*,#113697,.T.); +#113753 = PLANE('',#113754); +#113754 = AXIS2_PLACEMENT_3D('',#113755,#113756,#113757); +#113755 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#113756 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113757 = DIRECTION('',(0.,0.,1.)); +#113758 = ADVANCED_FACE('',(#113759),#113777,.T.); +#113759 = FACE_BOUND('',#113760,.T.); +#113760 = EDGE_LOOP('',(#113761,#113769,#113775,#113776)); +#113761 = ORIENTED_EDGE('',*,*,#113762,.T.); +#113762 = EDGE_CURVE('',#113739,#113763,#113765,.T.); +#113763 = VERTEX_POINT('',#113764); +#113764 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#113765 = LINE('',#113766,#113767); +#113766 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113767 = VECTOR('',#113768,1.); +#113768 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113769 = ORIENTED_EDGE('',*,*,#113770,.T.); +#113770 = EDGE_CURVE('',#113763,#112281,#113771,.T.); +#113771 = LINE('',#113772,#113773); +#113772 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#113773 = VECTOR('',#113774,1.); +#113774 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113775 = ORIENTED_EDGE('',*,*,#112288,.F.); +#113776 = ORIENTED_EDGE('',*,*,#113746,.F.); +#113777 = PLANE('',#113778); +#113778 = AXIS2_PLACEMENT_3D('',#113779,#113780,#113781); +#113779 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#113780 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#113781 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113782 = ADVANCED_FACE('',(#113783),#113819,.F.); +#113783 = FACE_BOUND('',#113784,.F.); +#113784 = EDGE_LOOP('',(#113785,#113786,#113794,#113802,#113810,#113816, + #113817,#113818)); +#113785 = ORIENTED_EDGE('',*,*,#112376,.F.); +#113786 = ORIENTED_EDGE('',*,*,#113787,.T.); +#113787 = EDGE_CURVE('',#112369,#113788,#113790,.T.); +#113788 = VERTEX_POINT('',#113789); +#113789 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#113790 = LINE('',#113791,#113792); +#113791 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#113792 = VECTOR('',#113793,1.); +#113793 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113794 = ORIENTED_EDGE('',*,*,#113795,.T.); +#113795 = EDGE_CURVE('',#113788,#113796,#113798,.T.); +#113796 = VERTEX_POINT('',#113797); +#113797 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#113798 = LINE('',#113799,#113800); +#113799 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#113800 = VECTOR('',#113801,1.); +#113801 = DIRECTION('',(0.,0.,-1.)); +#113802 = ORIENTED_EDGE('',*,*,#113803,.T.); +#113803 = EDGE_CURVE('',#113796,#113804,#113806,.T.); +#113804 = VERTEX_POINT('',#113805); +#113805 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#113806 = LINE('',#113807,#113808); +#113807 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#113808 = VECTOR('',#113809,1.); +#113809 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113810 = ORIENTED_EDGE('',*,*,#113811,.T.); +#113811 = EDGE_CURVE('',#113804,#113763,#113812,.T.); +#113812 = LINE('',#113813,#113814); +#113813 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#113814 = VECTOR('',#113815,1.); +#113815 = DIRECTION('',(0.,0.,1.)); +#113816 = ORIENTED_EDGE('',*,*,#113770,.T.); +#113817 = ORIENTED_EDGE('',*,*,#112280,.F.); +#113818 = ORIENTED_EDGE('',*,*,#113682,.T.); +#113819 = PLANE('',#113820); +#113820 = AXIS2_PLACEMENT_3D('',#113821,#113822,#113823); +#113821 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#113822 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113823 = DIRECTION('',(0.,0.,1.)); +#113824 = ADVANCED_FACE('',(#113825),#113836,.T.); +#113825 = FACE_BOUND('',#113826,.T.); +#113826 = EDGE_LOOP('',(#113827,#113828,#113829,#113835)); +#113827 = ORIENTED_EDGE('',*,*,#112368,.T.); +#113828 = ORIENTED_EDGE('',*,*,#113787,.T.); +#113829 = ORIENTED_EDGE('',*,*,#113830,.F.); +#113830 = EDGE_CURVE('',#113715,#113788,#113831,.T.); +#113831 = LINE('',#113832,#113833); +#113832 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#113833 = VECTOR('',#113834,1.); +#113834 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113835 = ORIENTED_EDGE('',*,*,#113714,.F.); +#113836 = PLANE('',#113837); +#113837 = AXIS2_PLACEMENT_3D('',#113838,#113839,#113840); +#113838 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#113839 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113840 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113841 = ADVANCED_FACE('',(#113842),#113853,.T.); +#113842 = FACE_BOUND('',#113843,.T.); +#113843 = EDGE_LOOP('',(#113844,#113845,#113846,#113847)); +#113844 = ORIENTED_EDGE('',*,*,#112544,.T.); +#113845 = ORIENTED_EDGE('',*,*,#112407,.T.); +#113846 = ORIENTED_EDGE('',*,*,#112432,.T.); +#113847 = ORIENTED_EDGE('',*,*,#113848,.T.); +#113848 = EDGE_CURVE('',#112433,#112537,#113849,.T.); +#113849 = LINE('',#113850,#113851); +#113850 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#113851 = VECTOR('',#113852,1.); +#113852 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113853 = PLANE('',#113854); +#113854 = AXIS2_PLACEMENT_3D('',#113855,#113856,#113857); +#113855 = CARTESIAN_POINT('',(-1.210096837549E-15,-10.16,0.9)); +#113856 = DIRECTION('',(0.,0.,1.)); +#113857 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113858 = ADVANCED_FACE('',(#113859),#113870,.T.); +#113859 = FACE_BOUND('',#113860,.T.); +#113860 = EDGE_LOOP('',(#113861,#113862,#113868,#113869)); +#113861 = ORIENTED_EDGE('',*,*,#112512,.T.); +#113862 = ORIENTED_EDGE('',*,*,#113863,.F.); +#113863 = EDGE_CURVE('',#112457,#112513,#113864,.T.); +#113864 = LINE('',#113865,#113866); +#113865 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#113866 = VECTOR('',#113867,1.); +#113867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#113868 = ORIENTED_EDGE('',*,*,#112464,.T.); +#113869 = ORIENTED_EDGE('',*,*,#112487,.T.); +#113870 = PLANE('',#113871); +#113871 = AXIS2_PLACEMENT_3D('',#113872,#113873,#113874); +#113872 = CARTESIAN_POINT('',(-1.210096837549E-15,-10.16,0.9)); +#113873 = DIRECTION('',(0.,0.,1.)); +#113874 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#113875 = ADVANCED_FACE('',(#113876),#113919,.T.); +#113876 = FACE_BOUND('',#113877,.T.); +#113877 = EDGE_LOOP('',(#113878,#113879,#113887,#113895,#113903,#113911, + #113917,#113918)); +#113878 = ORIENTED_EDGE('',*,*,#112520,.F.); +#113879 = ORIENTED_EDGE('',*,*,#113880,.T.); +#113880 = EDGE_CURVE('',#112521,#113881,#113883,.T.); +#113881 = VERTEX_POINT('',#113882); +#113882 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#113883 = LINE('',#113884,#113885); +#113884 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#113885 = VECTOR('',#113886,1.); +#113886 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113887 = ORIENTED_EDGE('',*,*,#113888,.T.); +#113888 = EDGE_CURVE('',#113881,#113889,#113891,.T.); +#113889 = VERTEX_POINT('',#113890); +#113890 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#113891 = LINE('',#113892,#113893); +#113892 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#113893 = VECTOR('',#113894,1.); +#113894 = DIRECTION('',(0.,0.,-1.)); +#113895 = ORIENTED_EDGE('',*,*,#113896,.T.); +#113896 = EDGE_CURVE('',#113889,#113897,#113899,.T.); +#113897 = VERTEX_POINT('',#113898); +#113898 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#113899 = LINE('',#113900,#113901); +#113900 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#113901 = VECTOR('',#113902,1.); +#113902 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113903 = ORIENTED_EDGE('',*,*,#113904,.T.); +#113904 = EDGE_CURVE('',#113897,#113905,#113907,.T.); +#113905 = VERTEX_POINT('',#113906); +#113906 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113907 = LINE('',#113908,#113909); +#113908 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#113909 = VECTOR('',#113910,1.); +#113910 = DIRECTION('',(0.,0.,1.)); +#113911 = ORIENTED_EDGE('',*,*,#113912,.T.); +#113912 = EDGE_CURVE('',#113905,#112449,#113913,.T.); +#113913 = LINE('',#113914,#113915); +#113914 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113915 = VECTOR('',#113916,1.); +#113916 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113917 = ORIENTED_EDGE('',*,*,#112456,.F.); +#113918 = ORIENTED_EDGE('',*,*,#113863,.T.); +#113919 = PLANE('',#113920); +#113920 = AXIS2_PLACEMENT_3D('',#113921,#113922,#113923); +#113921 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#113922 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113923 = DIRECTION('',(0.,0.,1.)); +#113924 = ADVANCED_FACE('',(#113925),#113943,.T.); +#113925 = FACE_BOUND('',#113926,.T.); +#113926 = EDGE_LOOP('',(#113927,#113935,#113941,#113942)); +#113927 = ORIENTED_EDGE('',*,*,#113928,.T.); +#113928 = EDGE_CURVE('',#113905,#113929,#113931,.T.); +#113929 = VERTEX_POINT('',#113930); +#113930 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#113931 = LINE('',#113932,#113933); +#113932 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113933 = VECTOR('',#113934,1.); +#113934 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#113935 = ORIENTED_EDGE('',*,*,#113936,.T.); +#113936 = EDGE_CURVE('',#113929,#112441,#113937,.T.); +#113937 = LINE('',#113938,#113939); +#113938 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#113939 = VECTOR('',#113940,1.); +#113940 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113941 = ORIENTED_EDGE('',*,*,#112448,.F.); +#113942 = ORIENTED_EDGE('',*,*,#113912,.F.); +#113943 = PLANE('',#113944); +#113944 = AXIS2_PLACEMENT_3D('',#113945,#113946,#113947); +#113945 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#113946 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#113947 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#113948 = ADVANCED_FACE('',(#113949),#113985,.F.); +#113949 = FACE_BOUND('',#113950,.F.); +#113950 = EDGE_LOOP('',(#113951,#113952,#113960,#113968,#113976,#113982, + #113983,#113984)); +#113951 = ORIENTED_EDGE('',*,*,#112536,.F.); +#113952 = ORIENTED_EDGE('',*,*,#113953,.T.); +#113953 = EDGE_CURVE('',#112529,#113954,#113956,.T.); +#113954 = VERTEX_POINT('',#113955); +#113955 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#113956 = LINE('',#113957,#113958); +#113957 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#113958 = VECTOR('',#113959,1.); +#113959 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#113960 = ORIENTED_EDGE('',*,*,#113961,.T.); +#113961 = EDGE_CURVE('',#113954,#113962,#113964,.T.); +#113962 = VERTEX_POINT('',#113963); +#113963 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#113964 = LINE('',#113965,#113966); +#113965 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#113966 = VECTOR('',#113967,1.); +#113967 = DIRECTION('',(0.,0.,-1.)); +#113968 = ORIENTED_EDGE('',*,*,#113969,.T.); +#113969 = EDGE_CURVE('',#113962,#113970,#113972,.T.); +#113970 = VERTEX_POINT('',#113971); +#113971 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#113972 = LINE('',#113973,#113974); +#113973 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#113974 = VECTOR('',#113975,1.); +#113975 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#113976 = ORIENTED_EDGE('',*,*,#113977,.T.); +#113977 = EDGE_CURVE('',#113970,#113929,#113978,.T.); +#113978 = LINE('',#113979,#113980); +#113979 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#113980 = VECTOR('',#113981,1.); +#113981 = DIRECTION('',(0.,0.,1.)); +#113982 = ORIENTED_EDGE('',*,*,#113936,.T.); +#113983 = ORIENTED_EDGE('',*,*,#112440,.F.); +#113984 = ORIENTED_EDGE('',*,*,#113848,.T.); +#113985 = PLANE('',#113986); +#113986 = AXIS2_PLACEMENT_3D('',#113987,#113988,#113989); +#113987 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#113988 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#113989 = DIRECTION('',(0.,0.,1.)); +#113990 = ADVANCED_FACE('',(#113991),#114002,.T.); +#113991 = FACE_BOUND('',#113992,.T.); +#113992 = EDGE_LOOP('',(#113993,#113994,#113995,#114001)); +#113993 = ORIENTED_EDGE('',*,*,#112528,.T.); +#113994 = ORIENTED_EDGE('',*,*,#113953,.T.); +#113995 = ORIENTED_EDGE('',*,*,#113996,.F.); +#113996 = EDGE_CURVE('',#113881,#113954,#113997,.T.); +#113997 = LINE('',#113998,#113999); +#113998 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#113999 = VECTOR('',#114000,1.); +#114000 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114001 = ORIENTED_EDGE('',*,*,#113880,.F.); +#114002 = PLANE('',#114003); +#114003 = AXIS2_PLACEMENT_3D('',#114004,#114005,#114006); +#114004 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#114005 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114006 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114007 = ADVANCED_FACE('',(#114008),#114019,.T.); +#114008 = FACE_BOUND('',#114009,.T.); +#114009 = EDGE_LOOP('',(#114010,#114011,#114012,#114013)); +#114010 = ORIENTED_EDGE('',*,*,#112704,.T.); +#114011 = ORIENTED_EDGE('',*,*,#112567,.T.); +#114012 = ORIENTED_EDGE('',*,*,#112592,.T.); +#114013 = ORIENTED_EDGE('',*,*,#114014,.T.); +#114014 = EDGE_CURVE('',#112593,#112697,#114015,.T.); +#114015 = LINE('',#114016,#114017); +#114016 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#114017 = VECTOR('',#114018,1.); +#114018 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114019 = PLANE('',#114020); +#114020 = AXIS2_PLACEMENT_3D('',#114021,#114022,#114023); +#114021 = CARTESIAN_POINT('',(-9.281001892939E-16,-7.62,0.9)); +#114022 = DIRECTION('',(0.,0.,1.)); +#114023 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114024 = ADVANCED_FACE('',(#114025),#114036,.T.); +#114025 = FACE_BOUND('',#114026,.T.); +#114026 = EDGE_LOOP('',(#114027,#114028,#114034,#114035)); +#114027 = ORIENTED_EDGE('',*,*,#112672,.T.); +#114028 = ORIENTED_EDGE('',*,*,#114029,.F.); +#114029 = EDGE_CURVE('',#112617,#112673,#114030,.T.); +#114030 = LINE('',#114031,#114032); +#114031 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#114032 = VECTOR('',#114033,1.); +#114033 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114034 = ORIENTED_EDGE('',*,*,#112624,.T.); +#114035 = ORIENTED_EDGE('',*,*,#112647,.T.); +#114036 = PLANE('',#114037); +#114037 = AXIS2_PLACEMENT_3D('',#114038,#114039,#114040); +#114038 = CARTESIAN_POINT('',(-9.281001892939E-16,-7.62,0.9)); +#114039 = DIRECTION('',(0.,0.,1.)); +#114040 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114041 = ADVANCED_FACE('',(#114042),#114085,.T.); +#114042 = FACE_BOUND('',#114043,.T.); +#114043 = EDGE_LOOP('',(#114044,#114045,#114053,#114061,#114069,#114077, + #114083,#114084)); +#114044 = ORIENTED_EDGE('',*,*,#112680,.F.); +#114045 = ORIENTED_EDGE('',*,*,#114046,.T.); +#114046 = EDGE_CURVE('',#112681,#114047,#114049,.T.); +#114047 = VERTEX_POINT('',#114048); +#114048 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114049 = LINE('',#114050,#114051); +#114050 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#114051 = VECTOR('',#114052,1.); +#114052 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114053 = ORIENTED_EDGE('',*,*,#114054,.T.); +#114054 = EDGE_CURVE('',#114047,#114055,#114057,.T.); +#114055 = VERTEX_POINT('',#114056); +#114056 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114057 = LINE('',#114058,#114059); +#114058 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114059 = VECTOR('',#114060,1.); +#114060 = DIRECTION('',(0.,0.,-1.)); +#114061 = ORIENTED_EDGE('',*,*,#114062,.T.); +#114062 = EDGE_CURVE('',#114055,#114063,#114065,.T.); +#114063 = VERTEX_POINT('',#114064); +#114064 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114065 = LINE('',#114066,#114067); +#114066 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114067 = VECTOR('',#114068,1.); +#114068 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114069 = ORIENTED_EDGE('',*,*,#114070,.T.); +#114070 = EDGE_CURVE('',#114063,#114071,#114073,.T.); +#114071 = VERTEX_POINT('',#114072); +#114072 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114073 = LINE('',#114074,#114075); +#114074 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114075 = VECTOR('',#114076,1.); +#114076 = DIRECTION('',(0.,0.,1.)); +#114077 = ORIENTED_EDGE('',*,*,#114078,.T.); +#114078 = EDGE_CURVE('',#114071,#112609,#114079,.T.); +#114079 = LINE('',#114080,#114081); +#114080 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114081 = VECTOR('',#114082,1.); +#114082 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114083 = ORIENTED_EDGE('',*,*,#112616,.F.); +#114084 = ORIENTED_EDGE('',*,*,#114029,.T.); +#114085 = PLANE('',#114086); +#114086 = AXIS2_PLACEMENT_3D('',#114087,#114088,#114089); +#114087 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#114088 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114089 = DIRECTION('',(0.,0.,1.)); +#114090 = ADVANCED_FACE('',(#114091),#114109,.T.); +#114091 = FACE_BOUND('',#114092,.T.); +#114092 = EDGE_LOOP('',(#114093,#114101,#114107,#114108)); +#114093 = ORIENTED_EDGE('',*,*,#114094,.T.); +#114094 = EDGE_CURVE('',#114071,#114095,#114097,.T.); +#114095 = VERTEX_POINT('',#114096); +#114096 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#114097 = LINE('',#114098,#114099); +#114098 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114099 = VECTOR('',#114100,1.); +#114100 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114101 = ORIENTED_EDGE('',*,*,#114102,.T.); +#114102 = EDGE_CURVE('',#114095,#112601,#114103,.T.); +#114103 = LINE('',#114104,#114105); +#114104 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#114105 = VECTOR('',#114106,1.); +#114106 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114107 = ORIENTED_EDGE('',*,*,#112608,.F.); +#114108 = ORIENTED_EDGE('',*,*,#114078,.F.); +#114109 = PLANE('',#114110); +#114110 = AXIS2_PLACEMENT_3D('',#114111,#114112,#114113); +#114111 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#114112 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114113 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114114 = ADVANCED_FACE('',(#114115),#114151,.F.); +#114115 = FACE_BOUND('',#114116,.F.); +#114116 = EDGE_LOOP('',(#114117,#114118,#114126,#114134,#114142,#114148, + #114149,#114150)); +#114117 = ORIENTED_EDGE('',*,*,#112696,.F.); +#114118 = ORIENTED_EDGE('',*,*,#114119,.T.); +#114119 = EDGE_CURVE('',#112689,#114120,#114122,.T.); +#114120 = VERTEX_POINT('',#114121); +#114121 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#114122 = LINE('',#114123,#114124); +#114123 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#114124 = VECTOR('',#114125,1.); +#114125 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114126 = ORIENTED_EDGE('',*,*,#114127,.T.); +#114127 = EDGE_CURVE('',#114120,#114128,#114130,.T.); +#114128 = VERTEX_POINT('',#114129); +#114129 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#114130 = LINE('',#114131,#114132); +#114131 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#114132 = VECTOR('',#114133,1.); +#114133 = DIRECTION('',(0.,0.,-1.)); +#114134 = ORIENTED_EDGE('',*,*,#114135,.T.); +#114135 = EDGE_CURVE('',#114128,#114136,#114138,.T.); +#114136 = VERTEX_POINT('',#114137); +#114137 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#114138 = LINE('',#114139,#114140); +#114139 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#114140 = VECTOR('',#114141,1.); +#114141 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114142 = ORIENTED_EDGE('',*,*,#114143,.T.); +#114143 = EDGE_CURVE('',#114136,#114095,#114144,.T.); +#114144 = LINE('',#114145,#114146); +#114145 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#114146 = VECTOR('',#114147,1.); +#114147 = DIRECTION('',(0.,0.,1.)); +#114148 = ORIENTED_EDGE('',*,*,#114102,.T.); +#114149 = ORIENTED_EDGE('',*,*,#112600,.F.); +#114150 = ORIENTED_EDGE('',*,*,#114014,.T.); +#114151 = PLANE('',#114152); +#114152 = AXIS2_PLACEMENT_3D('',#114153,#114154,#114155); +#114153 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#114154 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114155 = DIRECTION('',(0.,0.,1.)); +#114156 = ADVANCED_FACE('',(#114157),#114168,.T.); +#114157 = FACE_BOUND('',#114158,.T.); +#114158 = EDGE_LOOP('',(#114159,#114160,#114161,#114167)); +#114159 = ORIENTED_EDGE('',*,*,#112688,.T.); +#114160 = ORIENTED_EDGE('',*,*,#114119,.T.); +#114161 = ORIENTED_EDGE('',*,*,#114162,.F.); +#114162 = EDGE_CURVE('',#114047,#114120,#114163,.T.); +#114163 = LINE('',#114164,#114165); +#114164 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114165 = VECTOR('',#114166,1.); +#114166 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114167 = ORIENTED_EDGE('',*,*,#114046,.F.); +#114168 = PLANE('',#114169); +#114169 = AXIS2_PLACEMENT_3D('',#114170,#114171,#114172); +#114170 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#114171 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114172 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114173 = ADVANCED_FACE('',(#114174),#114185,.T.); +#114174 = FACE_BOUND('',#114175,.T.); +#114175 = EDGE_LOOP('',(#114176,#114177,#114178,#114179)); +#114176 = ORIENTED_EDGE('',*,*,#112864,.T.); +#114177 = ORIENTED_EDGE('',*,*,#112727,.T.); +#114178 = ORIENTED_EDGE('',*,*,#112752,.T.); +#114179 = ORIENTED_EDGE('',*,*,#114180,.T.); +#114180 = EDGE_CURVE('',#112753,#112857,#114181,.T.); +#114181 = LINE('',#114182,#114183); +#114182 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#114183 = VECTOR('',#114184,1.); +#114184 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114185 = PLANE('',#114186); +#114186 = AXIS2_PLACEMENT_3D('',#114187,#114188,#114189); +#114187 = CARTESIAN_POINT('',(-6.461035410391E-16,-5.08,0.9)); +#114188 = DIRECTION('',(0.,0.,1.)); +#114189 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114190 = ADVANCED_FACE('',(#114191),#114202,.T.); +#114191 = FACE_BOUND('',#114192,.T.); +#114192 = EDGE_LOOP('',(#114193,#114194,#114200,#114201)); +#114193 = ORIENTED_EDGE('',*,*,#112832,.T.); +#114194 = ORIENTED_EDGE('',*,*,#114195,.F.); +#114195 = EDGE_CURVE('',#112777,#112833,#114196,.T.); +#114196 = LINE('',#114197,#114198); +#114197 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#114198 = VECTOR('',#114199,1.); +#114199 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114200 = ORIENTED_EDGE('',*,*,#112784,.T.); +#114201 = ORIENTED_EDGE('',*,*,#112807,.T.); +#114202 = PLANE('',#114203); +#114203 = AXIS2_PLACEMENT_3D('',#114204,#114205,#114206); +#114204 = CARTESIAN_POINT('',(-6.461035410391E-16,-5.08,0.9)); +#114205 = DIRECTION('',(0.,0.,1.)); +#114206 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114207 = ADVANCED_FACE('',(#114208),#114251,.T.); +#114208 = FACE_BOUND('',#114209,.T.); +#114209 = EDGE_LOOP('',(#114210,#114211,#114219,#114227,#114235,#114243, + #114249,#114250)); +#114210 = ORIENTED_EDGE('',*,*,#112840,.F.); +#114211 = ORIENTED_EDGE('',*,*,#114212,.T.); +#114212 = EDGE_CURVE('',#112841,#114213,#114215,.T.); +#114213 = VERTEX_POINT('',#114214); +#114214 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114215 = LINE('',#114216,#114217); +#114216 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#114217 = VECTOR('',#114218,1.); +#114218 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114219 = ORIENTED_EDGE('',*,*,#114220,.T.); +#114220 = EDGE_CURVE('',#114213,#114221,#114223,.T.); +#114221 = VERTEX_POINT('',#114222); +#114222 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114223 = LINE('',#114224,#114225); +#114224 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114225 = VECTOR('',#114226,1.); +#114226 = DIRECTION('',(0.,0.,-1.)); +#114227 = ORIENTED_EDGE('',*,*,#114228,.T.); +#114228 = EDGE_CURVE('',#114221,#114229,#114231,.T.); +#114229 = VERTEX_POINT('',#114230); +#114230 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114231 = LINE('',#114232,#114233); +#114232 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114233 = VECTOR('',#114234,1.); +#114234 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114235 = ORIENTED_EDGE('',*,*,#114236,.T.); +#114236 = EDGE_CURVE('',#114229,#114237,#114239,.T.); +#114237 = VERTEX_POINT('',#114238); +#114238 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114239 = LINE('',#114240,#114241); +#114240 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114241 = VECTOR('',#114242,1.); +#114242 = DIRECTION('',(0.,0.,1.)); +#114243 = ORIENTED_EDGE('',*,*,#114244,.T.); +#114244 = EDGE_CURVE('',#114237,#112769,#114245,.T.); +#114245 = LINE('',#114246,#114247); +#114246 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114247 = VECTOR('',#114248,1.); +#114248 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114249 = ORIENTED_EDGE('',*,*,#112776,.F.); +#114250 = ORIENTED_EDGE('',*,*,#114195,.T.); +#114251 = PLANE('',#114252); +#114252 = AXIS2_PLACEMENT_3D('',#114253,#114254,#114255); +#114253 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#114254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114255 = DIRECTION('',(0.,0.,1.)); +#114256 = ADVANCED_FACE('',(#114257),#114275,.T.); +#114257 = FACE_BOUND('',#114258,.T.); +#114258 = EDGE_LOOP('',(#114259,#114267,#114273,#114274)); +#114259 = ORIENTED_EDGE('',*,*,#114260,.T.); +#114260 = EDGE_CURVE('',#114237,#114261,#114263,.T.); +#114261 = VERTEX_POINT('',#114262); +#114262 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#114263 = LINE('',#114264,#114265); +#114264 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114265 = VECTOR('',#114266,1.); +#114266 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114267 = ORIENTED_EDGE('',*,*,#114268,.T.); +#114268 = EDGE_CURVE('',#114261,#112761,#114269,.T.); +#114269 = LINE('',#114270,#114271); +#114270 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#114271 = VECTOR('',#114272,1.); +#114272 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114273 = ORIENTED_EDGE('',*,*,#112768,.F.); +#114274 = ORIENTED_EDGE('',*,*,#114244,.F.); +#114275 = PLANE('',#114276); +#114276 = AXIS2_PLACEMENT_3D('',#114277,#114278,#114279); +#114277 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#114278 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114279 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114280 = ADVANCED_FACE('',(#114281),#114317,.F.); +#114281 = FACE_BOUND('',#114282,.F.); +#114282 = EDGE_LOOP('',(#114283,#114284,#114292,#114300,#114308,#114314, + #114315,#114316)); +#114283 = ORIENTED_EDGE('',*,*,#112856,.F.); +#114284 = ORIENTED_EDGE('',*,*,#114285,.T.); +#114285 = EDGE_CURVE('',#112849,#114286,#114288,.T.); +#114286 = VERTEX_POINT('',#114287); +#114287 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#114288 = LINE('',#114289,#114290); +#114289 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#114290 = VECTOR('',#114291,1.); +#114291 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114292 = ORIENTED_EDGE('',*,*,#114293,.T.); +#114293 = EDGE_CURVE('',#114286,#114294,#114296,.T.); +#114294 = VERTEX_POINT('',#114295); +#114295 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#114296 = LINE('',#114297,#114298); +#114297 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#114298 = VECTOR('',#114299,1.); +#114299 = DIRECTION('',(0.,0.,-1.)); +#114300 = ORIENTED_EDGE('',*,*,#114301,.T.); +#114301 = EDGE_CURVE('',#114294,#114302,#114304,.T.); +#114302 = VERTEX_POINT('',#114303); +#114303 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#114304 = LINE('',#114305,#114306); +#114305 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#114306 = VECTOR('',#114307,1.); +#114307 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114308 = ORIENTED_EDGE('',*,*,#114309,.T.); +#114309 = EDGE_CURVE('',#114302,#114261,#114310,.T.); +#114310 = LINE('',#114311,#114312); +#114311 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#114312 = VECTOR('',#114313,1.); +#114313 = DIRECTION('',(0.,0.,1.)); +#114314 = ORIENTED_EDGE('',*,*,#114268,.T.); +#114315 = ORIENTED_EDGE('',*,*,#112760,.F.); +#114316 = ORIENTED_EDGE('',*,*,#114180,.T.); +#114317 = PLANE('',#114318); +#114318 = AXIS2_PLACEMENT_3D('',#114319,#114320,#114321); +#114319 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#114320 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114321 = DIRECTION('',(0.,0.,1.)); +#114322 = ADVANCED_FACE('',(#114323),#114334,.T.); +#114323 = FACE_BOUND('',#114324,.T.); +#114324 = EDGE_LOOP('',(#114325,#114326,#114327,#114333)); +#114325 = ORIENTED_EDGE('',*,*,#112848,.T.); +#114326 = ORIENTED_EDGE('',*,*,#114285,.T.); +#114327 = ORIENTED_EDGE('',*,*,#114328,.F.); +#114328 = EDGE_CURVE('',#114213,#114286,#114329,.T.); +#114329 = LINE('',#114330,#114331); +#114330 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114331 = VECTOR('',#114332,1.); +#114332 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114333 = ORIENTED_EDGE('',*,*,#114212,.F.); +#114334 = PLANE('',#114335); +#114335 = AXIS2_PLACEMENT_3D('',#114336,#114337,#114338); +#114336 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#114337 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114338 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114339 = ADVANCED_FACE('',(#114340),#114351,.T.); +#114340 = FACE_BOUND('',#114341,.T.); +#114341 = EDGE_LOOP('',(#114342,#114343,#114344,#114345)); +#114342 = ORIENTED_EDGE('',*,*,#113024,.T.); +#114343 = ORIENTED_EDGE('',*,*,#112887,.T.); +#114344 = ORIENTED_EDGE('',*,*,#112912,.T.); +#114345 = ORIENTED_EDGE('',*,*,#114346,.T.); +#114346 = EDGE_CURVE('',#112913,#113017,#114347,.T.); +#114347 = LINE('',#114348,#114349); +#114348 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#114349 = VECTOR('',#114350,1.); +#114350 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114351 = PLANE('',#114352); +#114352 = AXIS2_PLACEMENT_3D('',#114353,#114354,#114355); +#114353 = CARTESIAN_POINT('',(-3.641068927844E-16,-2.54,0.9)); +#114354 = DIRECTION('',(0.,0.,1.)); +#114355 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114356 = ADVANCED_FACE('',(#114357),#114368,.T.); +#114357 = FACE_BOUND('',#114358,.T.); +#114358 = EDGE_LOOP('',(#114359,#114360,#114366,#114367)); +#114359 = ORIENTED_EDGE('',*,*,#112992,.T.); +#114360 = ORIENTED_EDGE('',*,*,#114361,.F.); +#114361 = EDGE_CURVE('',#112937,#112993,#114362,.T.); +#114362 = LINE('',#114363,#114364); +#114363 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#114364 = VECTOR('',#114365,1.); +#114365 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114366 = ORIENTED_EDGE('',*,*,#112944,.T.); +#114367 = ORIENTED_EDGE('',*,*,#112967,.T.); +#114368 = PLANE('',#114369); +#114369 = AXIS2_PLACEMENT_3D('',#114370,#114371,#114372); +#114370 = CARTESIAN_POINT('',(-3.641068927844E-16,-2.54,0.9)); +#114371 = DIRECTION('',(0.,0.,1.)); +#114372 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114373 = ADVANCED_FACE('',(#114374),#114417,.T.); +#114374 = FACE_BOUND('',#114375,.T.); +#114375 = EDGE_LOOP('',(#114376,#114377,#114385,#114393,#114401,#114409, + #114415,#114416)); +#114376 = ORIENTED_EDGE('',*,*,#113000,.F.); +#114377 = ORIENTED_EDGE('',*,*,#114378,.T.); +#114378 = EDGE_CURVE('',#113001,#114379,#114381,.T.); +#114379 = VERTEX_POINT('',#114380); +#114380 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114381 = LINE('',#114382,#114383); +#114382 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#114383 = VECTOR('',#114384,1.); +#114384 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114385 = ORIENTED_EDGE('',*,*,#114386,.T.); +#114386 = EDGE_CURVE('',#114379,#114387,#114389,.T.); +#114387 = VERTEX_POINT('',#114388); +#114388 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114389 = LINE('',#114390,#114391); +#114390 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114391 = VECTOR('',#114392,1.); +#114392 = DIRECTION('',(0.,0.,-1.)); +#114393 = ORIENTED_EDGE('',*,*,#114394,.T.); +#114394 = EDGE_CURVE('',#114387,#114395,#114397,.T.); +#114395 = VERTEX_POINT('',#114396); +#114396 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114397 = LINE('',#114398,#114399); +#114398 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114399 = VECTOR('',#114400,1.); +#114400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114401 = ORIENTED_EDGE('',*,*,#114402,.T.); +#114402 = EDGE_CURVE('',#114395,#114403,#114405,.T.); +#114403 = VERTEX_POINT('',#114404); +#114404 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114405 = LINE('',#114406,#114407); +#114406 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114407 = VECTOR('',#114408,1.); +#114408 = DIRECTION('',(0.,0.,1.)); +#114409 = ORIENTED_EDGE('',*,*,#114410,.T.); +#114410 = EDGE_CURVE('',#114403,#112929,#114411,.T.); +#114411 = LINE('',#114412,#114413); +#114412 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114413 = VECTOR('',#114414,1.); +#114414 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114415 = ORIENTED_EDGE('',*,*,#112936,.F.); +#114416 = ORIENTED_EDGE('',*,*,#114361,.T.); +#114417 = PLANE('',#114418); +#114418 = AXIS2_PLACEMENT_3D('',#114419,#114420,#114421); +#114419 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#114420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114421 = DIRECTION('',(0.,0.,1.)); +#114422 = ADVANCED_FACE('',(#114423),#114441,.T.); +#114423 = FACE_BOUND('',#114424,.T.); +#114424 = EDGE_LOOP('',(#114425,#114433,#114439,#114440)); +#114425 = ORIENTED_EDGE('',*,*,#114426,.T.); +#114426 = EDGE_CURVE('',#114403,#114427,#114429,.T.); +#114427 = VERTEX_POINT('',#114428); +#114428 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#114429 = LINE('',#114430,#114431); +#114430 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114431 = VECTOR('',#114432,1.); +#114432 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114433 = ORIENTED_EDGE('',*,*,#114434,.T.); +#114434 = EDGE_CURVE('',#114427,#112921,#114435,.T.); +#114435 = LINE('',#114436,#114437); +#114436 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#114437 = VECTOR('',#114438,1.); +#114438 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114439 = ORIENTED_EDGE('',*,*,#112928,.F.); +#114440 = ORIENTED_EDGE('',*,*,#114410,.F.); +#114441 = PLANE('',#114442); +#114442 = AXIS2_PLACEMENT_3D('',#114443,#114444,#114445); +#114443 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#114444 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114445 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114446 = ADVANCED_FACE('',(#114447),#114483,.F.); +#114447 = FACE_BOUND('',#114448,.F.); +#114448 = EDGE_LOOP('',(#114449,#114450,#114458,#114466,#114474,#114480, + #114481,#114482)); +#114449 = ORIENTED_EDGE('',*,*,#113016,.F.); +#114450 = ORIENTED_EDGE('',*,*,#114451,.T.); +#114451 = EDGE_CURVE('',#113009,#114452,#114454,.T.); +#114452 = VERTEX_POINT('',#114453); +#114453 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#114454 = LINE('',#114455,#114456); +#114455 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#114456 = VECTOR('',#114457,1.); +#114457 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114458 = ORIENTED_EDGE('',*,*,#114459,.T.); +#114459 = EDGE_CURVE('',#114452,#114460,#114462,.T.); +#114460 = VERTEX_POINT('',#114461); +#114461 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#114462 = LINE('',#114463,#114464); +#114463 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#114464 = VECTOR('',#114465,1.); +#114465 = DIRECTION('',(0.,0.,-1.)); +#114466 = ORIENTED_EDGE('',*,*,#114467,.T.); +#114467 = EDGE_CURVE('',#114460,#114468,#114470,.T.); +#114468 = VERTEX_POINT('',#114469); +#114469 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#114470 = LINE('',#114471,#114472); +#114471 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#114472 = VECTOR('',#114473,1.); +#114473 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114474 = ORIENTED_EDGE('',*,*,#114475,.T.); +#114475 = EDGE_CURVE('',#114468,#114427,#114476,.T.); +#114476 = LINE('',#114477,#114478); +#114477 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#114478 = VECTOR('',#114479,1.); +#114479 = DIRECTION('',(0.,0.,1.)); +#114480 = ORIENTED_EDGE('',*,*,#114434,.T.); +#114481 = ORIENTED_EDGE('',*,*,#112920,.F.); +#114482 = ORIENTED_EDGE('',*,*,#114346,.T.); +#114483 = PLANE('',#114484); +#114484 = AXIS2_PLACEMENT_3D('',#114485,#114486,#114487); +#114485 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#114486 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114487 = DIRECTION('',(0.,0.,1.)); +#114488 = ADVANCED_FACE('',(#114489),#114500,.T.); +#114489 = FACE_BOUND('',#114490,.T.); +#114490 = EDGE_LOOP('',(#114491,#114492,#114493,#114499)); +#114491 = ORIENTED_EDGE('',*,*,#113008,.T.); +#114492 = ORIENTED_EDGE('',*,*,#114451,.T.); +#114493 = ORIENTED_EDGE('',*,*,#114494,.F.); +#114494 = EDGE_CURVE('',#114379,#114452,#114495,.T.); +#114495 = LINE('',#114496,#114497); +#114496 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114497 = VECTOR('',#114498,1.); +#114498 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114499 = ORIENTED_EDGE('',*,*,#114378,.F.); +#114500 = PLANE('',#114501); +#114501 = AXIS2_PLACEMENT_3D('',#114502,#114503,#114504); +#114502 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#114503 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114504 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114505 = ADVANCED_FACE('',(#114506),#114517,.T.); +#114506 = FACE_BOUND('',#114507,.T.); +#114507 = EDGE_LOOP('',(#114508,#114509,#114510,#114511)); +#114508 = ORIENTED_EDGE('',*,*,#113184,.T.); +#114509 = ORIENTED_EDGE('',*,*,#113047,.T.); +#114510 = ORIENTED_EDGE('',*,*,#113072,.T.); +#114511 = ORIENTED_EDGE('',*,*,#114512,.T.); +#114512 = EDGE_CURVE('',#113073,#113177,#114513,.T.); +#114513 = LINE('',#114514,#114515); +#114514 = CARTESIAN_POINT('',(0.1,4.329869796038E-16,0.9)); +#114515 = VECTOR('',#114516,1.); +#114516 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114517 = PLANE('',#114518); +#114518 = AXIS2_PLACEMENT_3D('',#114519,#114520,#114521); +#114519 = CARTESIAN_POINT('',(-8.211024452957E-17,8.881784197001E-16,0.9 + )); +#114520 = DIRECTION('',(0.,0.,1.)); +#114521 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114522 = ADVANCED_FACE('',(#114523),#114534,.T.); +#114523 = FACE_BOUND('',#114524,.T.); +#114524 = EDGE_LOOP('',(#114525,#114526,#114532,#114533)); +#114525 = ORIENTED_EDGE('',*,*,#113152,.T.); +#114526 = ORIENTED_EDGE('',*,*,#114527,.F.); +#114527 = EDGE_CURVE('',#113097,#113153,#114528,.T.); +#114528 = LINE('',#114529,#114530); +#114529 = CARTESIAN_POINT('',(-0.1,4.551914400963E-16,0.9)); +#114530 = VECTOR('',#114531,1.); +#114531 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114532 = ORIENTED_EDGE('',*,*,#113104,.T.); +#114533 = ORIENTED_EDGE('',*,*,#113127,.T.); +#114534 = PLANE('',#114535); +#114535 = AXIS2_PLACEMENT_3D('',#114536,#114537,#114538); +#114536 = CARTESIAN_POINT('',(-8.211024452957E-17,8.881784197001E-16,0.9 + )); +#114537 = DIRECTION('',(0.,0.,1.)); +#114538 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114539 = ADVANCED_FACE('',(#114540),#114583,.T.); +#114540 = FACE_BOUND('',#114541,.T.); +#114541 = EDGE_LOOP('',(#114542,#114543,#114551,#114559,#114567,#114575, + #114581,#114582)); +#114542 = ORIENTED_EDGE('',*,*,#113160,.F.); +#114543 = ORIENTED_EDGE('',*,*,#114544,.T.); +#114544 = EDGE_CURVE('',#113161,#114545,#114547,.T.); +#114545 = VERTEX_POINT('',#114546); +#114546 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114547 = LINE('',#114548,#114549); +#114548 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#114549 = VECTOR('',#114550,1.); +#114550 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114551 = ORIENTED_EDGE('',*,*,#114552,.T.); +#114552 = EDGE_CURVE('',#114545,#114553,#114555,.T.); +#114553 = VERTEX_POINT('',#114554); +#114554 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114555 = LINE('',#114556,#114557); +#114556 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114557 = VECTOR('',#114558,1.); +#114558 = DIRECTION('',(0.,0.,-1.)); +#114559 = ORIENTED_EDGE('',*,*,#114560,.T.); +#114560 = EDGE_CURVE('',#114553,#114561,#114563,.T.); +#114561 = VERTEX_POINT('',#114562); +#114562 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114563 = LINE('',#114564,#114565); +#114564 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114565 = VECTOR('',#114566,1.); +#114566 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114567 = ORIENTED_EDGE('',*,*,#114568,.T.); +#114568 = EDGE_CURVE('',#114561,#114569,#114571,.T.); +#114569 = VERTEX_POINT('',#114570); +#114570 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114571 = LINE('',#114572,#114573); +#114572 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114573 = VECTOR('',#114574,1.); +#114574 = DIRECTION('',(0.,0.,1.)); +#114575 = ORIENTED_EDGE('',*,*,#114576,.T.); +#114576 = EDGE_CURVE('',#114569,#113089,#114577,.T.); +#114577 = LINE('',#114578,#114579); +#114578 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114579 = VECTOR('',#114580,1.); +#114580 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114581 = ORIENTED_EDGE('',*,*,#113096,.F.); +#114582 = ORIENTED_EDGE('',*,*,#114527,.T.); +#114583 = PLANE('',#114584); +#114584 = AXIS2_PLACEMENT_3D('',#114585,#114586,#114587); +#114585 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#114586 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114587 = DIRECTION('',(0.,0.,1.)); +#114588 = ADVANCED_FACE('',(#114589),#114607,.T.); +#114589 = FACE_BOUND('',#114590,.T.); +#114590 = EDGE_LOOP('',(#114591,#114599,#114605,#114606)); +#114591 = ORIENTED_EDGE('',*,*,#114592,.T.); +#114592 = EDGE_CURVE('',#114569,#114593,#114595,.T.); +#114593 = VERTEX_POINT('',#114594); +#114594 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#114595 = LINE('',#114596,#114597); +#114596 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114597 = VECTOR('',#114598,1.); +#114598 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114599 = ORIENTED_EDGE('',*,*,#114600,.T.); +#114600 = EDGE_CURVE('',#114593,#113081,#114601,.T.); +#114601 = LINE('',#114602,#114603); +#114602 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#114603 = VECTOR('',#114604,1.); +#114604 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114605 = ORIENTED_EDGE('',*,*,#113088,.F.); +#114606 = ORIENTED_EDGE('',*,*,#114576,.F.); +#114607 = PLANE('',#114608); +#114608 = AXIS2_PLACEMENT_3D('',#114609,#114610,#114611); +#114609 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#114610 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#114611 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114612 = ADVANCED_FACE('',(#114613),#114649,.F.); +#114613 = FACE_BOUND('',#114614,.F.); +#114614 = EDGE_LOOP('',(#114615,#114616,#114624,#114632,#114640,#114646, + #114647,#114648)); +#114615 = ORIENTED_EDGE('',*,*,#113176,.F.); +#114616 = ORIENTED_EDGE('',*,*,#114617,.T.); +#114617 = EDGE_CURVE('',#113169,#114618,#114620,.T.); +#114618 = VERTEX_POINT('',#114619); +#114619 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#114620 = LINE('',#114621,#114622); +#114621 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#114622 = VECTOR('',#114623,1.); +#114623 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114624 = ORIENTED_EDGE('',*,*,#114625,.T.); +#114625 = EDGE_CURVE('',#114618,#114626,#114628,.T.); +#114626 = VERTEX_POINT('',#114627); +#114627 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#114628 = LINE('',#114629,#114630); +#114629 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#114630 = VECTOR('',#114631,1.); +#114631 = DIRECTION('',(0.,0.,-1.)); +#114632 = ORIENTED_EDGE('',*,*,#114633,.T.); +#114633 = EDGE_CURVE('',#114626,#114634,#114636,.T.); +#114634 = VERTEX_POINT('',#114635); +#114635 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#114636 = LINE('',#114637,#114638); +#114637 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#114638 = VECTOR('',#114639,1.); +#114639 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114640 = ORIENTED_EDGE('',*,*,#114641,.T.); +#114641 = EDGE_CURVE('',#114634,#114593,#114642,.T.); +#114642 = LINE('',#114643,#114644); +#114643 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#114644 = VECTOR('',#114645,1.); +#114645 = DIRECTION('',(0.,0.,1.)); +#114646 = ORIENTED_EDGE('',*,*,#114600,.T.); +#114647 = ORIENTED_EDGE('',*,*,#113080,.F.); +#114648 = ORIENTED_EDGE('',*,*,#114512,.T.); +#114649 = PLANE('',#114650); +#114650 = AXIS2_PLACEMENT_3D('',#114651,#114652,#114653); +#114651 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#114652 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#114653 = DIRECTION('',(0.,0.,1.)); +#114654 = ADVANCED_FACE('',(#114655),#114666,.T.); +#114655 = FACE_BOUND('',#114656,.T.); +#114656 = EDGE_LOOP('',(#114657,#114658,#114659,#114665)); +#114657 = ORIENTED_EDGE('',*,*,#113168,.T.); +#114658 = ORIENTED_EDGE('',*,*,#114617,.T.); +#114659 = ORIENTED_EDGE('',*,*,#114660,.F.); +#114660 = EDGE_CURVE('',#114545,#114618,#114661,.T.); +#114661 = LINE('',#114662,#114663); +#114662 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114663 = VECTOR('',#114664,1.); +#114664 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114665 = ORIENTED_EDGE('',*,*,#114544,.F.); +#114666 = PLANE('',#114667); +#114667 = AXIS2_PLACEMENT_3D('',#114668,#114669,#114670); +#114668 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#114669 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#114670 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#114671 = ADVANCED_FACE('',(#114672),#114683,.T.); +#114672 = FACE_BOUND('',#114673,.T.); +#114673 = EDGE_LOOP('',(#114674,#114680,#114681,#114682)); +#114674 = ORIENTED_EDGE('',*,*,#114675,.T.); +#114675 = EDGE_CURVE('',#113731,#113804,#114676,.T.); +#114676 = LINE('',#114677,#114678); +#114677 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#114678 = VECTOR('',#114679,1.); +#114679 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114680 = ORIENTED_EDGE('',*,*,#113811,.T.); +#114681 = ORIENTED_EDGE('',*,*,#113762,.F.); +#114682 = ORIENTED_EDGE('',*,*,#113738,.F.); +#114683 = PLANE('',#114684); +#114684 = AXIS2_PLACEMENT_3D('',#114685,#114686,#114687); +#114685 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#114686 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114687 = DIRECTION('',(0.,0.,1.)); +#114688 = ADVANCED_FACE('',(#114689),#114700,.T.); +#114689 = FACE_BOUND('',#114690,.T.); +#114690 = EDGE_LOOP('',(#114691,#114697,#114698,#114699)); +#114691 = ORIENTED_EDGE('',*,*,#114692,.T.); +#114692 = EDGE_CURVE('',#113723,#113796,#114693,.T.); +#114693 = LINE('',#114694,#114695); +#114694 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#114695 = VECTOR('',#114696,1.); +#114696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114697 = ORIENTED_EDGE('',*,*,#113803,.T.); +#114698 = ORIENTED_EDGE('',*,*,#114675,.F.); +#114699 = ORIENTED_EDGE('',*,*,#113730,.F.); +#114700 = PLANE('',#114701); +#114701 = AXIS2_PLACEMENT_3D('',#114702,#114703,#114704); +#114702 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#114703 = DIRECTION('',(0.,0.,1.)); +#114704 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114705 = ADVANCED_FACE('',(#114706),#114712,.T.); +#114706 = FACE_BOUND('',#114707,.T.); +#114707 = EDGE_LOOP('',(#114708,#114709,#114710,#114711)); +#114708 = ORIENTED_EDGE('',*,*,#113830,.T.); +#114709 = ORIENTED_EDGE('',*,*,#113795,.T.); +#114710 = ORIENTED_EDGE('',*,*,#114692,.F.); +#114711 = ORIENTED_EDGE('',*,*,#113722,.F.); +#114712 = PLANE('',#114713); +#114713 = AXIS2_PLACEMENT_3D('',#114714,#114715,#114716); +#114714 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#114715 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114716 = DIRECTION('',(0.,0.,-1.)); +#114717 = ADVANCED_FACE('',(#114718),#114729,.T.); +#114718 = FACE_BOUND('',#114719,.T.); +#114719 = EDGE_LOOP('',(#114720,#114726,#114727,#114728)); +#114720 = ORIENTED_EDGE('',*,*,#114721,.T.); +#114721 = EDGE_CURVE('',#113897,#113970,#114722,.T.); +#114722 = LINE('',#114723,#114724); +#114723 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#114724 = VECTOR('',#114725,1.); +#114725 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114726 = ORIENTED_EDGE('',*,*,#113977,.T.); +#114727 = ORIENTED_EDGE('',*,*,#113928,.F.); +#114728 = ORIENTED_EDGE('',*,*,#113904,.F.); +#114729 = PLANE('',#114730); +#114730 = AXIS2_PLACEMENT_3D('',#114731,#114732,#114733); +#114731 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#114732 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114733 = DIRECTION('',(0.,0.,1.)); +#114734 = ADVANCED_FACE('',(#114735),#114746,.T.); +#114735 = FACE_BOUND('',#114736,.T.); +#114736 = EDGE_LOOP('',(#114737,#114743,#114744,#114745)); +#114737 = ORIENTED_EDGE('',*,*,#114738,.T.); +#114738 = EDGE_CURVE('',#113889,#113962,#114739,.T.); +#114739 = LINE('',#114740,#114741); +#114740 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#114741 = VECTOR('',#114742,1.); +#114742 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114743 = ORIENTED_EDGE('',*,*,#113969,.T.); +#114744 = ORIENTED_EDGE('',*,*,#114721,.F.); +#114745 = ORIENTED_EDGE('',*,*,#113896,.F.); +#114746 = PLANE('',#114747); +#114747 = AXIS2_PLACEMENT_3D('',#114748,#114749,#114750); +#114748 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#114749 = DIRECTION('',(0.,0.,1.)); +#114750 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114751 = ADVANCED_FACE('',(#114752),#114758,.T.); +#114752 = FACE_BOUND('',#114753,.T.); +#114753 = EDGE_LOOP('',(#114754,#114755,#114756,#114757)); +#114754 = ORIENTED_EDGE('',*,*,#113996,.T.); +#114755 = ORIENTED_EDGE('',*,*,#113961,.T.); +#114756 = ORIENTED_EDGE('',*,*,#114738,.F.); +#114757 = ORIENTED_EDGE('',*,*,#113888,.F.); +#114758 = PLANE('',#114759); +#114759 = AXIS2_PLACEMENT_3D('',#114760,#114761,#114762); +#114760 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#114761 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114762 = DIRECTION('',(0.,0.,-1.)); +#114763 = ADVANCED_FACE('',(#114764),#114775,.T.); +#114764 = FACE_BOUND('',#114765,.T.); +#114765 = EDGE_LOOP('',(#114766,#114772,#114773,#114774)); +#114766 = ORIENTED_EDGE('',*,*,#114767,.T.); +#114767 = EDGE_CURVE('',#114063,#114136,#114768,.T.); +#114768 = LINE('',#114769,#114770); +#114769 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114770 = VECTOR('',#114771,1.); +#114771 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114772 = ORIENTED_EDGE('',*,*,#114143,.T.); +#114773 = ORIENTED_EDGE('',*,*,#114094,.F.); +#114774 = ORIENTED_EDGE('',*,*,#114070,.F.); +#114775 = PLANE('',#114776); +#114776 = AXIS2_PLACEMENT_3D('',#114777,#114778,#114779); +#114777 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#114778 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114779 = DIRECTION('',(0.,0.,1.)); +#114780 = ADVANCED_FACE('',(#114781),#114792,.T.); +#114781 = FACE_BOUND('',#114782,.T.); +#114782 = EDGE_LOOP('',(#114783,#114789,#114790,#114791)); +#114783 = ORIENTED_EDGE('',*,*,#114784,.T.); +#114784 = EDGE_CURVE('',#114055,#114128,#114785,.T.); +#114785 = LINE('',#114786,#114787); +#114786 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114787 = VECTOR('',#114788,1.); +#114788 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114789 = ORIENTED_EDGE('',*,*,#114135,.T.); +#114790 = ORIENTED_EDGE('',*,*,#114767,.F.); +#114791 = ORIENTED_EDGE('',*,*,#114062,.F.); +#114792 = PLANE('',#114793); +#114793 = AXIS2_PLACEMENT_3D('',#114794,#114795,#114796); +#114794 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#114795 = DIRECTION('',(0.,0.,1.)); +#114796 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114797 = ADVANCED_FACE('',(#114798),#114804,.T.); +#114798 = FACE_BOUND('',#114799,.T.); +#114799 = EDGE_LOOP('',(#114800,#114801,#114802,#114803)); +#114800 = ORIENTED_EDGE('',*,*,#114162,.T.); +#114801 = ORIENTED_EDGE('',*,*,#114127,.T.); +#114802 = ORIENTED_EDGE('',*,*,#114784,.F.); +#114803 = ORIENTED_EDGE('',*,*,#114054,.F.); +#114804 = PLANE('',#114805); +#114805 = AXIS2_PLACEMENT_3D('',#114806,#114807,#114808); +#114806 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#114807 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114808 = DIRECTION('',(0.,0.,-1.)); +#114809 = ADVANCED_FACE('',(#114810),#114821,.T.); +#114810 = FACE_BOUND('',#114811,.T.); +#114811 = EDGE_LOOP('',(#114812,#114818,#114819,#114820)); +#114812 = ORIENTED_EDGE('',*,*,#114813,.T.); +#114813 = EDGE_CURVE('',#114229,#114302,#114814,.T.); +#114814 = LINE('',#114815,#114816); +#114815 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114816 = VECTOR('',#114817,1.); +#114817 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114818 = ORIENTED_EDGE('',*,*,#114309,.T.); +#114819 = ORIENTED_EDGE('',*,*,#114260,.F.); +#114820 = ORIENTED_EDGE('',*,*,#114236,.F.); +#114821 = PLANE('',#114822); +#114822 = AXIS2_PLACEMENT_3D('',#114823,#114824,#114825); +#114823 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#114824 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114825 = DIRECTION('',(0.,0.,1.)); +#114826 = ADVANCED_FACE('',(#114827),#114838,.T.); +#114827 = FACE_BOUND('',#114828,.T.); +#114828 = EDGE_LOOP('',(#114829,#114835,#114836,#114837)); +#114829 = ORIENTED_EDGE('',*,*,#114830,.T.); +#114830 = EDGE_CURVE('',#114221,#114294,#114831,.T.); +#114831 = LINE('',#114832,#114833); +#114832 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114833 = VECTOR('',#114834,1.); +#114834 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114835 = ORIENTED_EDGE('',*,*,#114301,.T.); +#114836 = ORIENTED_EDGE('',*,*,#114813,.F.); +#114837 = ORIENTED_EDGE('',*,*,#114228,.F.); +#114838 = PLANE('',#114839); +#114839 = AXIS2_PLACEMENT_3D('',#114840,#114841,#114842); +#114840 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#114841 = DIRECTION('',(0.,0.,1.)); +#114842 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114843 = ADVANCED_FACE('',(#114844),#114850,.T.); +#114844 = FACE_BOUND('',#114845,.T.); +#114845 = EDGE_LOOP('',(#114846,#114847,#114848,#114849)); +#114846 = ORIENTED_EDGE('',*,*,#114328,.T.); +#114847 = ORIENTED_EDGE('',*,*,#114293,.T.); +#114848 = ORIENTED_EDGE('',*,*,#114830,.F.); +#114849 = ORIENTED_EDGE('',*,*,#114220,.F.); +#114850 = PLANE('',#114851); +#114851 = AXIS2_PLACEMENT_3D('',#114852,#114853,#114854); +#114852 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#114853 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114854 = DIRECTION('',(0.,0.,-1.)); +#114855 = ADVANCED_FACE('',(#114856),#114867,.T.); +#114856 = FACE_BOUND('',#114857,.T.); +#114857 = EDGE_LOOP('',(#114858,#114864,#114865,#114866)); +#114858 = ORIENTED_EDGE('',*,*,#114859,.T.); +#114859 = EDGE_CURVE('',#114395,#114468,#114860,.T.); +#114860 = LINE('',#114861,#114862); +#114861 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114862 = VECTOR('',#114863,1.); +#114863 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114864 = ORIENTED_EDGE('',*,*,#114475,.T.); +#114865 = ORIENTED_EDGE('',*,*,#114426,.F.); +#114866 = ORIENTED_EDGE('',*,*,#114402,.F.); +#114867 = PLANE('',#114868); +#114868 = AXIS2_PLACEMENT_3D('',#114869,#114870,#114871); +#114869 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#114870 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114871 = DIRECTION('',(0.,0.,1.)); +#114872 = ADVANCED_FACE('',(#114873),#114884,.T.); +#114873 = FACE_BOUND('',#114874,.T.); +#114874 = EDGE_LOOP('',(#114875,#114881,#114882,#114883)); +#114875 = ORIENTED_EDGE('',*,*,#114876,.T.); +#114876 = EDGE_CURVE('',#114387,#114460,#114877,.T.); +#114877 = LINE('',#114878,#114879); +#114878 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114879 = VECTOR('',#114880,1.); +#114880 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114881 = ORIENTED_EDGE('',*,*,#114467,.T.); +#114882 = ORIENTED_EDGE('',*,*,#114859,.F.); +#114883 = ORIENTED_EDGE('',*,*,#114394,.F.); +#114884 = PLANE('',#114885); +#114885 = AXIS2_PLACEMENT_3D('',#114886,#114887,#114888); +#114886 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#114887 = DIRECTION('',(0.,0.,1.)); +#114888 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114889 = ADVANCED_FACE('',(#114890),#114896,.T.); +#114890 = FACE_BOUND('',#114891,.T.); +#114891 = EDGE_LOOP('',(#114892,#114893,#114894,#114895)); +#114892 = ORIENTED_EDGE('',*,*,#114494,.T.); +#114893 = ORIENTED_EDGE('',*,*,#114459,.T.); +#114894 = ORIENTED_EDGE('',*,*,#114876,.F.); +#114895 = ORIENTED_EDGE('',*,*,#114386,.F.); +#114896 = PLANE('',#114897); +#114897 = AXIS2_PLACEMENT_3D('',#114898,#114899,#114900); +#114898 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#114899 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114900 = DIRECTION('',(0.,0.,-1.)); +#114901 = ADVANCED_FACE('',(#114902),#114913,.T.); +#114902 = FACE_BOUND('',#114903,.T.); +#114903 = EDGE_LOOP('',(#114904,#114910,#114911,#114912)); +#114904 = ORIENTED_EDGE('',*,*,#114905,.T.); +#114905 = EDGE_CURVE('',#114561,#114634,#114906,.T.); +#114906 = LINE('',#114907,#114908); +#114907 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114908 = VECTOR('',#114909,1.); +#114909 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114910 = ORIENTED_EDGE('',*,*,#114641,.T.); +#114911 = ORIENTED_EDGE('',*,*,#114592,.F.); +#114912 = ORIENTED_EDGE('',*,*,#114568,.F.); +#114913 = PLANE('',#114914); +#114914 = AXIS2_PLACEMENT_3D('',#114915,#114916,#114917); +#114915 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#114916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#114917 = DIRECTION('',(0.,0.,1.)); +#114918 = ADVANCED_FACE('',(#114919),#114930,.T.); +#114919 = FACE_BOUND('',#114920,.T.); +#114920 = EDGE_LOOP('',(#114921,#114927,#114928,#114929)); +#114921 = ORIENTED_EDGE('',*,*,#114922,.T.); +#114922 = EDGE_CURVE('',#114553,#114626,#114923,.T.); +#114923 = LINE('',#114924,#114925); +#114924 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114925 = VECTOR('',#114926,1.); +#114926 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#114927 = ORIENTED_EDGE('',*,*,#114633,.T.); +#114928 = ORIENTED_EDGE('',*,*,#114905,.F.); +#114929 = ORIENTED_EDGE('',*,*,#114560,.F.); +#114930 = PLANE('',#114931); +#114931 = AXIS2_PLACEMENT_3D('',#114932,#114933,#114934); +#114932 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#114933 = DIRECTION('',(0.,0.,1.)); +#114934 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#114935 = ADVANCED_FACE('',(#114936),#114942,.T.); +#114936 = FACE_BOUND('',#114937,.T.); +#114937 = EDGE_LOOP('',(#114938,#114939,#114940,#114941)); +#114938 = ORIENTED_EDGE('',*,*,#114660,.T.); +#114939 = ORIENTED_EDGE('',*,*,#114625,.T.); +#114940 = ORIENTED_EDGE('',*,*,#114922,.F.); +#114941 = ORIENTED_EDGE('',*,*,#114552,.F.); +#114942 = PLANE('',#114943); +#114943 = AXIS2_PLACEMENT_3D('',#114944,#114945,#114946); +#114944 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#114945 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#114946 = DIRECTION('',(0.,0.,-1.)); +#114947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#114951)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#114948,#114949,#114950)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#114948 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#114949 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#114950 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#114951 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#114948, + 'distance_accuracy_value','confusion accuracy'); +#114952 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#114953,#114955); +#114953 = ( REPRESENTATION_RELATIONSHIP('','',#110008,#109985) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#114954) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#114954 = ITEM_DEFINED_TRANSFORMATION('','',#11,#109986); +#114955 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #114956); +#114956 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('153','=>[0:1:1:66]','',#109980 + ,#110003,$); +#114957 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#110005)); +#114958 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#114959,#114961); +#114959 = ( REPRESENTATION_RELATIONSHIP('','',#103453,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#114960) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#114960 = ITEM_DEFINED_TRANSFORMATION('','',#11,#487); +#114961 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #114962); +#114962 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('155','MOD1','',#5,#103448,$); +#114963 = SHAPE_DEFINITION_REPRESENTATION(#114964,#114970); +#114964 = PRODUCT_DEFINITION_SHAPE('','',#114965); +#114965 = PRODUCT_DEFINITION('design','',#114966,#114969); +#114966 = PRODUCT_DEFINITION_FORMATION('','',#114967); +#114967 = PRODUCT('PinSocket_1x10_P2.54mm_Vertical', + 'PinSocket_1x10_P2.54mm_Vertical','',(#114968)); +#114968 = PRODUCT_CONTEXT('',#2,'mechanical'); +#114969 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#114970 = SHAPE_REPRESENTATION('',(#11,#114971),#114975); +#114971 = AXIS2_PLACEMENT_3D('',#114972,#114973,#114974); +#114972 = CARTESIAN_POINT('',(0.,0.,0.)); +#114973 = DIRECTION('',(0.,0.,1.)); +#114974 = DIRECTION('',(1.,0.,-0.)); +#114975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#114979)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#114976,#114977,#114978)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#114976 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#114977 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#114978 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#114979 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#114976, + 'distance_accuracy_value','confusion accuracy'); +#114980 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#114981,#114983); +#114981 = ( REPRESENTATION_RELATIONSHIP('','',#114970,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#114982) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#114982 = ITEM_DEFINED_TRANSFORMATION('','',#11,#491); +#114983 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #114984); +#114984 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('157','MOD1','',#5,#114965,$); +#114985 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#114967)); +#114986 = SHAPE_DEFINITION_REPRESENTATION(#114987,#114993); +#114987 = PRODUCT_DEFINITION_SHAPE('','',#114988); +#114988 = PRODUCT_DEFINITION('design','',#114989,#114992); +#114989 = PRODUCT_DEFINITION_FORMATION('','',#114990); +#114990 = PRODUCT('PinSocket_1x10_P2.54mm_Vertical', + 'PinSocket_1x10_P2.54mm_Vertical','',(#114991)); +#114991 = PRODUCT_CONTEXT('',#2,'mechanical'); +#114992 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#114993 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#114994),#123036); +#114994 = MANIFOLD_SOLID_BREP('',#114995); +#114995 = CLOSED_SHELL('',(#114996,#115036,#115099,#115162,#115179, + #115536,#115558,#115575,#116252,#116264,#116276,#116307,#116331, + #116355,#116372,#116403,#116427,#116451,#116468,#116499,#116523, + #116547,#116564,#116595,#116619,#116643,#116660,#116691,#116715, + #116739,#116756,#116787,#116811,#116835,#116852,#116883,#116907, + #116931,#116948,#116979,#117003,#117027,#117044,#117075,#117099, + #117123,#117140,#117171,#117195,#117219,#117236,#117253,#117300, + #117317,#117364,#117381,#117428,#117445,#117492,#117509,#117556, + #117573,#117620,#117637,#117684,#117701,#117748,#117765,#117812, + #117829,#117876,#117893,#117940,#117957,#118004,#118021,#118068, + #118085,#118132,#118149,#118196,#118213,#118260,#118277,#118324, + #118341,#118388,#118405,#118452,#118469,#118516,#118547,#118603, + #118627,#118676,#118707,#118763,#118787,#118836,#118867,#118923, + #118947,#118996,#119027,#119083,#119107,#119156,#119187,#119243, + #119267,#119316,#119347,#119403,#119427,#119476,#119507,#119563, + #119587,#119636,#119667,#119723,#119747,#119796,#119827,#119883, + #119907,#119956,#119987,#120043,#120067,#120116,#120133,#120150, + #120167,#120184,#120196,#120213,#120230,#120247,#120264,#120276, + #120293,#120310,#120327,#120344,#120356,#120373,#120390,#120407, + #120424,#120436,#120453,#120470,#120487,#120504,#120516,#120533, + #120550,#120567,#120584,#120596,#120613,#120630,#120647,#120664, + #120676,#120693,#120710,#120727,#120744,#120756,#120773,#120790, + #120807,#120824,#120836,#120853,#120870,#120887,#120904,#120916, + #120933,#120950,#120999,#121023,#121065,#121082,#121099,#121116, + #121165,#121189,#121231,#121248,#121265,#121282,#121331,#121355, + #121397,#121414,#121431,#121448,#121497,#121521,#121563,#121580, + #121597,#121614,#121663,#121687,#121729,#121746,#121763,#121780, + #121829,#121853,#121895,#121912,#121929,#121946,#121995,#122019, + #122061,#122078,#122095,#122112,#122161,#122185,#122227,#122244, + #122261,#122278,#122327,#122351,#122393,#122410,#122427,#122444, + #122493,#122517,#122559,#122576,#122593,#122610,#122622,#122639, + #122656,#122668,#122685,#122702,#122714,#122731,#122748,#122760, + #122777,#122794,#122806,#122823,#122840,#122852,#122869,#122886, + #122898,#122915,#122932,#122944,#122961,#122978,#122990,#123007, + #123024)); +#114996 = ADVANCED_FACE('',(#114997),#115031,.F.); +#114997 = FACE_BOUND('',#114998,.F.); +#114998 = EDGE_LOOP('',(#114999,#115009,#115017,#115025)); +#114999 = ORIENTED_EDGE('',*,*,#115000,.T.); +#115000 = EDGE_CURVE('',#115001,#115003,#115005,.T.); +#115001 = VERTEX_POINT('',#115002); +#115002 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115003 = VERTEX_POINT('',#115004); +#115004 = CARTESIAN_POINT('',(1.27,-24.13,8.5)); +#115005 = LINE('',#115006,#115007); +#115006 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115007 = VECTOR('',#115008,1.); +#115008 = DIRECTION('',(0.,0.,1.)); +#115009 = ORIENTED_EDGE('',*,*,#115010,.T.); +#115010 = EDGE_CURVE('',#115003,#115011,#115013,.T.); +#115011 = VERTEX_POINT('',#115012); +#115012 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#115013 = LINE('',#115014,#115015); +#115014 = CARTESIAN_POINT('',(1.27,-24.13,8.5)); +#115015 = VECTOR('',#115016,1.); +#115016 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115017 = ORIENTED_EDGE('',*,*,#115018,.F.); +#115018 = EDGE_CURVE('',#115019,#115011,#115021,.T.); +#115019 = VERTEX_POINT('',#115020); +#115020 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115021 = LINE('',#115022,#115023); +#115022 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115023 = VECTOR('',#115024,1.); +#115024 = DIRECTION('',(0.,0.,1.)); +#115025 = ORIENTED_EDGE('',*,*,#115026,.F.); +#115026 = EDGE_CURVE('',#115001,#115019,#115027,.T.); +#115027 = LINE('',#115028,#115029); +#115028 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115029 = VECTOR('',#115030,1.); +#115030 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115031 = PLANE('',#115032); +#115032 = AXIS2_PLACEMENT_3D('',#115033,#115034,#115035); +#115033 = CARTESIAN_POINT('',(1.27,-24.13,0.)); +#115034 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115035 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115036 = ADVANCED_FACE('',(#115037),#115094,.F.); +#115037 = FACE_BOUND('',#115038,.F.); +#115038 = EDGE_LOOP('',(#115039,#115049,#115057,#115063,#115064,#115072, + #115080,#115088)); +#115039 = ORIENTED_EDGE('',*,*,#115040,.F.); +#115040 = EDGE_CURVE('',#115041,#115043,#115045,.T.); +#115041 = VERTEX_POINT('',#115042); +#115042 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115043 = VERTEX_POINT('',#115044); +#115044 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.)); +#115045 = LINE('',#115046,#115047); +#115046 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115047 = VECTOR('',#115048,1.); +#115048 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115049 = ORIENTED_EDGE('',*,*,#115050,.T.); +#115050 = EDGE_CURVE('',#115041,#115051,#115053,.T.); +#115051 = VERTEX_POINT('',#115052); +#115052 = CARTESIAN_POINT('',(-1.27,-24.13,8.5)); +#115053 = LINE('',#115054,#115055); +#115054 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115055 = VECTOR('',#115056,1.); +#115056 = DIRECTION('',(0.,0.,1.)); +#115057 = ORIENTED_EDGE('',*,*,#115058,.T.); +#115058 = EDGE_CURVE('',#115051,#115003,#115059,.T.); +#115059 = LINE('',#115060,#115061); +#115060 = CARTESIAN_POINT('',(-1.27,-24.13,8.5)); +#115061 = VECTOR('',#115062,1.); +#115062 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115063 = ORIENTED_EDGE('',*,*,#115000,.F.); +#115064 = ORIENTED_EDGE('',*,*,#115065,.F.); +#115065 = EDGE_CURVE('',#115066,#115001,#115068,.T.); +#115066 = VERTEX_POINT('',#115067); +#115067 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#115068 = LINE('',#115069,#115070); +#115069 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115070 = VECTOR('',#115071,1.); +#115071 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115072 = ORIENTED_EDGE('',*,*,#115073,.T.); +#115073 = EDGE_CURVE('',#115066,#115074,#115076,.T.); +#115074 = VERTEX_POINT('',#115075); +#115075 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.2)); +#115076 = LINE('',#115077,#115078); +#115077 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#115078 = VECTOR('',#115079,1.); +#115079 = DIRECTION('',(0.,0.,1.)); +#115080 = ORIENTED_EDGE('',*,*,#115081,.F.); +#115081 = EDGE_CURVE('',#115082,#115074,#115084,.T.); +#115082 = VERTEX_POINT('',#115083); +#115083 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.2)); +#115084 = LINE('',#115085,#115086); +#115085 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.2)); +#115086 = VECTOR('',#115087,1.); +#115087 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115088 = ORIENTED_EDGE('',*,*,#115089,.F.); +#115089 = EDGE_CURVE('',#115043,#115082,#115090,.T.); +#115090 = LINE('',#115091,#115092); +#115091 = CARTESIAN_POINT('',(-0.846666666667,-24.13,0.)); +#115092 = VECTOR('',#115093,1.); +#115093 = DIRECTION('',(0.,0.,1.)); +#115094 = PLANE('',#115095); +#115095 = AXIS2_PLACEMENT_3D('',#115096,#115097,#115098); +#115096 = CARTESIAN_POINT('',(-1.27,-24.13,0.)); +#115097 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115098 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115099 = ADVANCED_FACE('',(#115100),#115157,.F.); +#115100 = FACE_BOUND('',#115101,.F.); +#115101 = EDGE_LOOP('',(#115102,#115110,#115111,#115119,#115127,#115135, + #115143,#115151)); +#115102 = ORIENTED_EDGE('',*,*,#115103,.F.); +#115103 = EDGE_CURVE('',#115019,#115104,#115106,.T.); +#115104 = VERTEX_POINT('',#115105); +#115105 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#115106 = LINE('',#115107,#115108); +#115107 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115108 = VECTOR('',#115109,1.); +#115109 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115110 = ORIENTED_EDGE('',*,*,#115018,.T.); +#115111 = ORIENTED_EDGE('',*,*,#115112,.T.); +#115112 = EDGE_CURVE('',#115011,#115113,#115115,.T.); +#115113 = VERTEX_POINT('',#115114); +#115114 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#115115 = LINE('',#115116,#115117); +#115116 = CARTESIAN_POINT('',(1.27,1.27,8.5)); +#115117 = VECTOR('',#115118,1.); +#115118 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115119 = ORIENTED_EDGE('',*,*,#115120,.F.); +#115120 = EDGE_CURVE('',#115121,#115113,#115123,.T.); +#115121 = VERTEX_POINT('',#115122); +#115122 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#115123 = LINE('',#115124,#115125); +#115124 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#115125 = VECTOR('',#115126,1.); +#115126 = DIRECTION('',(0.,0.,1.)); +#115127 = ORIENTED_EDGE('',*,*,#115128,.F.); +#115128 = EDGE_CURVE('',#115129,#115121,#115131,.T.); +#115129 = VERTEX_POINT('',#115130); +#115130 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115131 = LINE('',#115132,#115133); +#115132 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115133 = VECTOR('',#115134,1.); +#115134 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115135 = ORIENTED_EDGE('',*,*,#115136,.T.); +#115136 = EDGE_CURVE('',#115129,#115137,#115139,.T.); +#115137 = VERTEX_POINT('',#115138); +#115138 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#115139 = LINE('',#115140,#115141); +#115140 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115141 = VECTOR('',#115142,1.); +#115142 = DIRECTION('',(0.,0.,1.)); +#115143 = ORIENTED_EDGE('',*,*,#115144,.F.); +#115144 = EDGE_CURVE('',#115145,#115137,#115147,.T.); +#115145 = VERTEX_POINT('',#115146); +#115146 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#115147 = LINE('',#115148,#115149); +#115148 = CARTESIAN_POINT('',(0.846666666667,1.27,0.2)); +#115149 = VECTOR('',#115150,1.); +#115150 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115151 = ORIENTED_EDGE('',*,*,#115152,.F.); +#115152 = EDGE_CURVE('',#115104,#115145,#115153,.T.); +#115153 = LINE('',#115154,#115155); +#115154 = CARTESIAN_POINT('',(0.846666666667,1.27,0.)); +#115155 = VECTOR('',#115156,1.); +#115156 = DIRECTION('',(0.,0.,1.)); +#115157 = PLANE('',#115158); +#115158 = AXIS2_PLACEMENT_3D('',#115159,#115160,#115161); +#115159 = CARTESIAN_POINT('',(1.27,1.27,0.)); +#115160 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115161 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115162 = ADVANCED_FACE('',(#115163),#115174,.F.); +#115163 = FACE_BOUND('',#115164,.F.); +#115164 = EDGE_LOOP('',(#115165,#115166,#115167,#115168)); +#115165 = ORIENTED_EDGE('',*,*,#115065,.T.); +#115166 = ORIENTED_EDGE('',*,*,#115026,.T.); +#115167 = ORIENTED_EDGE('',*,*,#115103,.T.); +#115168 = ORIENTED_EDGE('',*,*,#115169,.F.); +#115169 = EDGE_CURVE('',#115066,#115104,#115170,.T.); +#115170 = LINE('',#115171,#115172); +#115171 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#115172 = VECTOR('',#115173,1.); +#115173 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115174 = PLANE('',#115175); +#115175 = AXIS2_PLACEMENT_3D('',#115176,#115177,#115178); +#115176 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,0.)); +#115177 = DIRECTION('',(0.,0.,1.)); +#115178 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#115179 = ADVANCED_FACE('',(#115180,#115191,#115225,#115259,#115293, + #115327,#115361,#115395,#115429,#115463,#115497),#115531,.T.); +#115180 = FACE_BOUND('',#115181,.T.); +#115181 = EDGE_LOOP('',(#115182,#115183,#115184,#115190)); +#115182 = ORIENTED_EDGE('',*,*,#115010,.T.); +#115183 = ORIENTED_EDGE('',*,*,#115112,.T.); +#115184 = ORIENTED_EDGE('',*,*,#115185,.T.); +#115185 = EDGE_CURVE('',#115113,#115051,#115186,.T.); +#115186 = LINE('',#115187,#115188); +#115187 = CARTESIAN_POINT('',(-1.27,1.27,8.5)); +#115188 = VECTOR('',#115189,1.); +#115189 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115190 = ORIENTED_EDGE('',*,*,#115058,.T.); +#115191 = FACE_BOUND('',#115192,.T.); +#115192 = EDGE_LOOP('',(#115193,#115203,#115211,#115219)); +#115193 = ORIENTED_EDGE('',*,*,#115194,.F.); +#115194 = EDGE_CURVE('',#115195,#115197,#115199,.T.); +#115195 = VERTEX_POINT('',#115196); +#115196 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#115197 = VERTEX_POINT('',#115198); +#115198 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#115199 = LINE('',#115200,#115201); +#115200 = CARTESIAN_POINT('',(0.6,-23.46,8.5)); +#115201 = VECTOR('',#115202,1.); +#115202 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115203 = ORIENTED_EDGE('',*,*,#115204,.F.); +#115204 = EDGE_CURVE('',#115205,#115195,#115207,.T.); +#115205 = VERTEX_POINT('',#115206); +#115206 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#115207 = LINE('',#115208,#115209); +#115208 = CARTESIAN_POINT('',(-0.6,-23.46,8.5)); +#115209 = VECTOR('',#115210,1.); +#115210 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115211 = ORIENTED_EDGE('',*,*,#115212,.F.); +#115212 = EDGE_CURVE('',#115213,#115205,#115215,.T.); +#115213 = VERTEX_POINT('',#115214); +#115214 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#115215 = LINE('',#115216,#115217); +#115216 = CARTESIAN_POINT('',(-0.6,-22.26,8.5)); +#115217 = VECTOR('',#115218,1.); +#115218 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115219 = ORIENTED_EDGE('',*,*,#115220,.F.); +#115220 = EDGE_CURVE('',#115197,#115213,#115221,.T.); +#115221 = LINE('',#115222,#115223); +#115222 = CARTESIAN_POINT('',(0.6,-22.26,8.5)); +#115223 = VECTOR('',#115224,1.); +#115224 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115225 = FACE_BOUND('',#115226,.T.); +#115226 = EDGE_LOOP('',(#115227,#115237,#115245,#115253)); +#115227 = ORIENTED_EDGE('',*,*,#115228,.F.); +#115228 = EDGE_CURVE('',#115229,#115231,#115233,.T.); +#115229 = VERTEX_POINT('',#115230); +#115230 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#115231 = VERTEX_POINT('',#115232); +#115232 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#115233 = LINE('',#115234,#115235); +#115234 = CARTESIAN_POINT('',(0.6,-20.92,8.5)); +#115235 = VECTOR('',#115236,1.); +#115236 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115237 = ORIENTED_EDGE('',*,*,#115238,.F.); +#115238 = EDGE_CURVE('',#115239,#115229,#115241,.T.); +#115239 = VERTEX_POINT('',#115240); +#115240 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#115241 = LINE('',#115242,#115243); +#115242 = CARTESIAN_POINT('',(-0.6,-20.92,8.5)); +#115243 = VECTOR('',#115244,1.); +#115244 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115245 = ORIENTED_EDGE('',*,*,#115246,.F.); +#115246 = EDGE_CURVE('',#115247,#115239,#115249,.T.); +#115247 = VERTEX_POINT('',#115248); +#115248 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#115249 = LINE('',#115250,#115251); +#115250 = CARTESIAN_POINT('',(-0.6,-19.72,8.5)); +#115251 = VECTOR('',#115252,1.); +#115252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115253 = ORIENTED_EDGE('',*,*,#115254,.F.); +#115254 = EDGE_CURVE('',#115231,#115247,#115255,.T.); +#115255 = LINE('',#115256,#115257); +#115256 = CARTESIAN_POINT('',(0.6,-19.72,8.5)); +#115257 = VECTOR('',#115258,1.); +#115258 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115259 = FACE_BOUND('',#115260,.T.); +#115260 = EDGE_LOOP('',(#115261,#115271,#115279,#115287)); +#115261 = ORIENTED_EDGE('',*,*,#115262,.F.); +#115262 = EDGE_CURVE('',#115263,#115265,#115267,.T.); +#115263 = VERTEX_POINT('',#115264); +#115264 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#115265 = VERTEX_POINT('',#115266); +#115266 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#115267 = LINE('',#115268,#115269); +#115268 = CARTESIAN_POINT('',(0.6,-18.38,8.5)); +#115269 = VECTOR('',#115270,1.); +#115270 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115271 = ORIENTED_EDGE('',*,*,#115272,.F.); +#115272 = EDGE_CURVE('',#115273,#115263,#115275,.T.); +#115273 = VERTEX_POINT('',#115274); +#115274 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#115275 = LINE('',#115276,#115277); +#115276 = CARTESIAN_POINT('',(-0.6,-18.38,8.5)); +#115277 = VECTOR('',#115278,1.); +#115278 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115279 = ORIENTED_EDGE('',*,*,#115280,.F.); +#115280 = EDGE_CURVE('',#115281,#115273,#115283,.T.); +#115281 = VERTEX_POINT('',#115282); +#115282 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#115283 = LINE('',#115284,#115285); +#115284 = CARTESIAN_POINT('',(-0.6,-17.18,8.5)); +#115285 = VECTOR('',#115286,1.); +#115286 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115287 = ORIENTED_EDGE('',*,*,#115288,.F.); +#115288 = EDGE_CURVE('',#115265,#115281,#115289,.T.); +#115289 = LINE('',#115290,#115291); +#115290 = CARTESIAN_POINT('',(0.6,-17.18,8.5)); +#115291 = VECTOR('',#115292,1.); +#115292 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115293 = FACE_BOUND('',#115294,.T.); +#115294 = EDGE_LOOP('',(#115295,#115305,#115313,#115321)); +#115295 = ORIENTED_EDGE('',*,*,#115296,.F.); +#115296 = EDGE_CURVE('',#115297,#115299,#115301,.T.); +#115297 = VERTEX_POINT('',#115298); +#115298 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#115299 = VERTEX_POINT('',#115300); +#115300 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#115301 = LINE('',#115302,#115303); +#115302 = CARTESIAN_POINT('',(0.6,-15.84,8.5)); +#115303 = VECTOR('',#115304,1.); +#115304 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115305 = ORIENTED_EDGE('',*,*,#115306,.F.); +#115306 = EDGE_CURVE('',#115307,#115297,#115309,.T.); +#115307 = VERTEX_POINT('',#115308); +#115308 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#115309 = LINE('',#115310,#115311); +#115310 = CARTESIAN_POINT('',(-0.6,-15.84,8.5)); +#115311 = VECTOR('',#115312,1.); +#115312 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115313 = ORIENTED_EDGE('',*,*,#115314,.F.); +#115314 = EDGE_CURVE('',#115315,#115307,#115317,.T.); +#115315 = VERTEX_POINT('',#115316); +#115316 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#115317 = LINE('',#115318,#115319); +#115318 = CARTESIAN_POINT('',(-0.6,-14.64,8.5)); +#115319 = VECTOR('',#115320,1.); +#115320 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115321 = ORIENTED_EDGE('',*,*,#115322,.F.); +#115322 = EDGE_CURVE('',#115299,#115315,#115323,.T.); +#115323 = LINE('',#115324,#115325); +#115324 = CARTESIAN_POINT('',(0.6,-14.64,8.5)); +#115325 = VECTOR('',#115326,1.); +#115326 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115327 = FACE_BOUND('',#115328,.T.); +#115328 = EDGE_LOOP('',(#115329,#115339,#115347,#115355)); +#115329 = ORIENTED_EDGE('',*,*,#115330,.F.); +#115330 = EDGE_CURVE('',#115331,#115333,#115335,.T.); +#115331 = VERTEX_POINT('',#115332); +#115332 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#115333 = VERTEX_POINT('',#115334); +#115334 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#115335 = LINE('',#115336,#115337); +#115336 = CARTESIAN_POINT('',(0.6,-13.3,8.5)); +#115337 = VECTOR('',#115338,1.); +#115338 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115339 = ORIENTED_EDGE('',*,*,#115340,.F.); +#115340 = EDGE_CURVE('',#115341,#115331,#115343,.T.); +#115341 = VERTEX_POINT('',#115342); +#115342 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#115343 = LINE('',#115344,#115345); +#115344 = CARTESIAN_POINT('',(-0.6,-13.3,8.5)); +#115345 = VECTOR('',#115346,1.); +#115346 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115347 = ORIENTED_EDGE('',*,*,#115348,.F.); +#115348 = EDGE_CURVE('',#115349,#115341,#115351,.T.); +#115349 = VERTEX_POINT('',#115350); +#115350 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#115351 = LINE('',#115352,#115353); +#115352 = CARTESIAN_POINT('',(-0.6,-12.1,8.5)); +#115353 = VECTOR('',#115354,1.); +#115354 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115355 = ORIENTED_EDGE('',*,*,#115356,.F.); +#115356 = EDGE_CURVE('',#115333,#115349,#115357,.T.); +#115357 = LINE('',#115358,#115359); +#115358 = CARTESIAN_POINT('',(0.6,-12.1,8.5)); +#115359 = VECTOR('',#115360,1.); +#115360 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115361 = FACE_BOUND('',#115362,.T.); +#115362 = EDGE_LOOP('',(#115363,#115373,#115381,#115389)); +#115363 = ORIENTED_EDGE('',*,*,#115364,.F.); +#115364 = EDGE_CURVE('',#115365,#115367,#115369,.T.); +#115365 = VERTEX_POINT('',#115366); +#115366 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#115367 = VERTEX_POINT('',#115368); +#115368 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#115369 = LINE('',#115370,#115371); +#115370 = CARTESIAN_POINT('',(0.6,-10.76,8.5)); +#115371 = VECTOR('',#115372,1.); +#115372 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115373 = ORIENTED_EDGE('',*,*,#115374,.F.); +#115374 = EDGE_CURVE('',#115375,#115365,#115377,.T.); +#115375 = VERTEX_POINT('',#115376); +#115376 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#115377 = LINE('',#115378,#115379); +#115378 = CARTESIAN_POINT('',(-0.6,-10.76,8.5)); +#115379 = VECTOR('',#115380,1.); +#115380 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115381 = ORIENTED_EDGE('',*,*,#115382,.F.); +#115382 = EDGE_CURVE('',#115383,#115375,#115385,.T.); +#115383 = VERTEX_POINT('',#115384); +#115384 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#115385 = LINE('',#115386,#115387); +#115386 = CARTESIAN_POINT('',(-0.6,-9.56,8.5)); +#115387 = VECTOR('',#115388,1.); +#115388 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115389 = ORIENTED_EDGE('',*,*,#115390,.F.); +#115390 = EDGE_CURVE('',#115367,#115383,#115391,.T.); +#115391 = LINE('',#115392,#115393); +#115392 = CARTESIAN_POINT('',(0.6,-9.56,8.5)); +#115393 = VECTOR('',#115394,1.); +#115394 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115395 = FACE_BOUND('',#115396,.T.); +#115396 = EDGE_LOOP('',(#115397,#115407,#115415,#115423)); +#115397 = ORIENTED_EDGE('',*,*,#115398,.F.); +#115398 = EDGE_CURVE('',#115399,#115401,#115403,.T.); +#115399 = VERTEX_POINT('',#115400); +#115400 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#115401 = VERTEX_POINT('',#115402); +#115402 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#115403 = LINE('',#115404,#115405); +#115404 = CARTESIAN_POINT('',(0.6,-8.22,8.5)); +#115405 = VECTOR('',#115406,1.); +#115406 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115407 = ORIENTED_EDGE('',*,*,#115408,.F.); +#115408 = EDGE_CURVE('',#115409,#115399,#115411,.T.); +#115409 = VERTEX_POINT('',#115410); +#115410 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#115411 = LINE('',#115412,#115413); +#115412 = CARTESIAN_POINT('',(-0.6,-8.22,8.5)); +#115413 = VECTOR('',#115414,1.); +#115414 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115415 = ORIENTED_EDGE('',*,*,#115416,.F.); +#115416 = EDGE_CURVE('',#115417,#115409,#115419,.T.); +#115417 = VERTEX_POINT('',#115418); +#115418 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#115419 = LINE('',#115420,#115421); +#115420 = CARTESIAN_POINT('',(-0.6,-7.02,8.5)); +#115421 = VECTOR('',#115422,1.); +#115422 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115423 = ORIENTED_EDGE('',*,*,#115424,.F.); +#115424 = EDGE_CURVE('',#115401,#115417,#115425,.T.); +#115425 = LINE('',#115426,#115427); +#115426 = CARTESIAN_POINT('',(0.6,-7.02,8.5)); +#115427 = VECTOR('',#115428,1.); +#115428 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115429 = FACE_BOUND('',#115430,.T.); +#115430 = EDGE_LOOP('',(#115431,#115441,#115449,#115457)); +#115431 = ORIENTED_EDGE('',*,*,#115432,.F.); +#115432 = EDGE_CURVE('',#115433,#115435,#115437,.T.); +#115433 = VERTEX_POINT('',#115434); +#115434 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#115435 = VERTEX_POINT('',#115436); +#115436 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#115437 = LINE('',#115438,#115439); +#115438 = CARTESIAN_POINT('',(0.6,-5.68,8.5)); +#115439 = VECTOR('',#115440,1.); +#115440 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115441 = ORIENTED_EDGE('',*,*,#115442,.F.); +#115442 = EDGE_CURVE('',#115443,#115433,#115445,.T.); +#115443 = VERTEX_POINT('',#115444); +#115444 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#115445 = LINE('',#115446,#115447); +#115446 = CARTESIAN_POINT('',(-0.6,-5.68,8.5)); +#115447 = VECTOR('',#115448,1.); +#115448 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115449 = ORIENTED_EDGE('',*,*,#115450,.F.); +#115450 = EDGE_CURVE('',#115451,#115443,#115453,.T.); +#115451 = VERTEX_POINT('',#115452); +#115452 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#115453 = LINE('',#115454,#115455); +#115454 = CARTESIAN_POINT('',(-0.6,-4.48,8.5)); +#115455 = VECTOR('',#115456,1.); +#115456 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115457 = ORIENTED_EDGE('',*,*,#115458,.F.); +#115458 = EDGE_CURVE('',#115435,#115451,#115459,.T.); +#115459 = LINE('',#115460,#115461); +#115460 = CARTESIAN_POINT('',(0.6,-4.48,8.5)); +#115461 = VECTOR('',#115462,1.); +#115462 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115463 = FACE_BOUND('',#115464,.T.); +#115464 = EDGE_LOOP('',(#115465,#115475,#115483,#115491)); +#115465 = ORIENTED_EDGE('',*,*,#115466,.F.); +#115466 = EDGE_CURVE('',#115467,#115469,#115471,.T.); +#115467 = VERTEX_POINT('',#115468); +#115468 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#115469 = VERTEX_POINT('',#115470); +#115470 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#115471 = LINE('',#115472,#115473); +#115472 = CARTESIAN_POINT('',(0.6,-3.14,8.5)); +#115473 = VECTOR('',#115474,1.); +#115474 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115475 = ORIENTED_EDGE('',*,*,#115476,.F.); +#115476 = EDGE_CURVE('',#115477,#115467,#115479,.T.); +#115477 = VERTEX_POINT('',#115478); +#115478 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#115479 = LINE('',#115480,#115481); +#115480 = CARTESIAN_POINT('',(-0.6,-3.14,8.5)); +#115481 = VECTOR('',#115482,1.); +#115482 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115483 = ORIENTED_EDGE('',*,*,#115484,.F.); +#115484 = EDGE_CURVE('',#115485,#115477,#115487,.T.); +#115485 = VERTEX_POINT('',#115486); +#115486 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#115487 = LINE('',#115488,#115489); +#115488 = CARTESIAN_POINT('',(-0.6,-1.94,8.5)); +#115489 = VECTOR('',#115490,1.); +#115490 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115491 = ORIENTED_EDGE('',*,*,#115492,.F.); +#115492 = EDGE_CURVE('',#115469,#115485,#115493,.T.); +#115493 = LINE('',#115494,#115495); +#115494 = CARTESIAN_POINT('',(0.6,-1.94,8.5)); +#115495 = VECTOR('',#115496,1.); +#115496 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115497 = FACE_BOUND('',#115498,.T.); +#115498 = EDGE_LOOP('',(#115499,#115509,#115517,#115525)); +#115499 = ORIENTED_EDGE('',*,*,#115500,.F.); +#115500 = EDGE_CURVE('',#115501,#115503,#115505,.T.); +#115501 = VERTEX_POINT('',#115502); +#115502 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#115503 = VERTEX_POINT('',#115504); +#115504 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#115505 = LINE('',#115506,#115507); +#115506 = CARTESIAN_POINT('',(0.6,-0.6,8.5)); +#115507 = VECTOR('',#115508,1.); +#115508 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115509 = ORIENTED_EDGE('',*,*,#115510,.F.); +#115510 = EDGE_CURVE('',#115511,#115501,#115513,.T.); +#115511 = VERTEX_POINT('',#115512); +#115512 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#115513 = LINE('',#115514,#115515); +#115514 = CARTESIAN_POINT('',(-0.6,-0.6,8.5)); +#115515 = VECTOR('',#115516,1.); +#115516 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115517 = ORIENTED_EDGE('',*,*,#115518,.F.); +#115518 = EDGE_CURVE('',#115519,#115511,#115521,.T.); +#115519 = VERTEX_POINT('',#115520); +#115520 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#115521 = LINE('',#115522,#115523); +#115522 = CARTESIAN_POINT('',(-0.6,0.6,8.5)); +#115523 = VECTOR('',#115524,1.); +#115524 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115525 = ORIENTED_EDGE('',*,*,#115526,.F.); +#115526 = EDGE_CURVE('',#115503,#115519,#115527,.T.); +#115527 = LINE('',#115528,#115529); +#115528 = CARTESIAN_POINT('',(0.6,0.6,8.5)); +#115529 = VECTOR('',#115530,1.); +#115530 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#115531 = PLANE('',#115532); +#115532 = AXIS2_PLACEMENT_3D('',#115533,#115534,#115535); +#115533 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,8.5)); +#115534 = DIRECTION('',(0.,0.,1.)); +#115535 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#115536 = ADVANCED_FACE('',(#115537),#115553,.F.); +#115537 = FACE_BOUND('',#115538,.F.); +#115538 = EDGE_LOOP('',(#115539,#115540,#115546,#115547)); +#115539 = ORIENTED_EDGE('',*,*,#115040,.T.); +#115540 = ORIENTED_EDGE('',*,*,#115541,.F.); +#115541 = EDGE_CURVE('',#115129,#115043,#115542,.T.); +#115542 = LINE('',#115543,#115544); +#115543 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115544 = VECTOR('',#115545,1.); +#115545 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115546 = ORIENTED_EDGE('',*,*,#115128,.T.); +#115547 = ORIENTED_EDGE('',*,*,#115548,.T.); +#115548 = EDGE_CURVE('',#115121,#115041,#115549,.T.); +#115549 = LINE('',#115550,#115551); +#115550 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#115551 = VECTOR('',#115552,1.); +#115552 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115553 = PLANE('',#115554); +#115554 = AXIS2_PLACEMENT_3D('',#115555,#115556,#115557); +#115555 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,0.)); +#115556 = DIRECTION('',(0.,0.,1.)); +#115557 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#115558 = ADVANCED_FACE('',(#115559),#115570,.T.); +#115559 = FACE_BOUND('',#115560,.T.); +#115560 = EDGE_LOOP('',(#115561,#115562,#115568,#115569)); +#115561 = ORIENTED_EDGE('',*,*,#115136,.T.); +#115562 = ORIENTED_EDGE('',*,*,#115563,.T.); +#115563 = EDGE_CURVE('',#115137,#115082,#115564,.T.); +#115564 = LINE('',#115565,#115566); +#115565 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.2)); +#115566 = VECTOR('',#115567,1.); +#115567 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115568 = ORIENTED_EDGE('',*,*,#115089,.F.); +#115569 = ORIENTED_EDGE('',*,*,#115541,.F.); +#115570 = PLANE('',#115571); +#115571 = AXIS2_PLACEMENT_3D('',#115572,#115573,#115574); +#115572 = CARTESIAN_POINT('',(-0.846666666667,1.27,0.)); +#115573 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115575 = ADVANCED_FACE('',(#115576,#115587,#115653,#115719,#115785, + #115851,#115917,#115983,#116049,#116115,#116181),#116247,.F.); +#115576 = FACE_BOUND('',#115577,.F.); +#115577 = EDGE_LOOP('',(#115578,#115584,#115585,#115586)); +#115578 = ORIENTED_EDGE('',*,*,#115579,.T.); +#115579 = EDGE_CURVE('',#115074,#115145,#115580,.T.); +#115580 = LINE('',#115581,#115582); +#115581 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.2)); +#115582 = VECTOR('',#115583,1.); +#115583 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115584 = ORIENTED_EDGE('',*,*,#115144,.T.); +#115585 = ORIENTED_EDGE('',*,*,#115563,.T.); +#115586 = ORIENTED_EDGE('',*,*,#115081,.T.); +#115587 = FACE_BOUND('',#115588,.F.); +#115588 = EDGE_LOOP('',(#115589,#115599,#115607,#115615,#115623,#115631, + #115639,#115647)); +#115589 = ORIENTED_EDGE('',*,*,#115590,.F.); +#115590 = EDGE_CURVE('',#115591,#115593,#115595,.T.); +#115591 = VERTEX_POINT('',#115592); +#115592 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115593 = VERTEX_POINT('',#115594); +#115594 = CARTESIAN_POINT('',(0.1,-23.31,0.2)); +#115595 = LINE('',#115596,#115597); +#115596 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115597 = VECTOR('',#115598,1.); +#115598 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115599 = ORIENTED_EDGE('',*,*,#115600,.T.); +#115600 = EDGE_CURVE('',#115591,#115601,#115603,.T.); +#115601 = VERTEX_POINT('',#115602); +#115602 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#115603 = LINE('',#115604,#115605); +#115604 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115605 = VECTOR('',#115606,1.); +#115606 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115607 = ORIENTED_EDGE('',*,*,#115608,.F.); +#115608 = EDGE_CURVE('',#115609,#115601,#115611,.T.); +#115609 = VERTEX_POINT('',#115610); +#115610 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#115611 = LINE('',#115612,#115613); +#115612 = CARTESIAN_POINT('',(-0.1,-17.145,0.2)); +#115613 = VECTOR('',#115614,1.); +#115614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115615 = ORIENTED_EDGE('',*,*,#115616,.T.); +#115616 = EDGE_CURVE('',#115609,#115617,#115619,.T.); +#115617 = VERTEX_POINT('',#115618); +#115618 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#115619 = LINE('',#115620,#115621); +#115620 = CARTESIAN_POINT('',(-0.1,-23.31,0.2)); +#115621 = VECTOR('',#115622,1.); +#115622 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115623 = ORIENTED_EDGE('',*,*,#115624,.T.); +#115624 = EDGE_CURVE('',#115617,#115625,#115627,.T.); +#115625 = VERTEX_POINT('',#115626); +#115626 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#115627 = LINE('',#115628,#115629); +#115628 = CARTESIAN_POINT('',(-0.1,-22.41,0.2)); +#115629 = VECTOR('',#115630,1.); +#115630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115631 = ORIENTED_EDGE('',*,*,#115632,.T.); +#115632 = EDGE_CURVE('',#115625,#115633,#115635,.T.); +#115633 = VERTEX_POINT('',#115634); +#115634 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#115635 = LINE('',#115636,#115637); +#115636 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#115637 = VECTOR('',#115638,1.); +#115638 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115639 = ORIENTED_EDGE('',*,*,#115640,.T.); +#115640 = EDGE_CURVE('',#115633,#115641,#115643,.T.); +#115641 = VERTEX_POINT('',#115642); +#115642 = CARTESIAN_POINT('',(0.1,-23.16,0.2)); +#115643 = LINE('',#115644,#115645); +#115644 = CARTESIAN_POINT('',(0.1,-17.145,0.2)); +#115645 = VECTOR('',#115646,1.); +#115646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115647 = ORIENTED_EDGE('',*,*,#115648,.T.); +#115648 = EDGE_CURVE('',#115641,#115593,#115649,.T.); +#115649 = LINE('',#115650,#115651); +#115650 = CARTESIAN_POINT('',(0.1,-22.41,0.2)); +#115651 = VECTOR('',#115652,1.); +#115652 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115653 = FACE_BOUND('',#115654,.F.); +#115654 = EDGE_LOOP('',(#115655,#115665,#115673,#115681,#115689,#115697, + #115705,#115713)); +#115655 = ORIENTED_EDGE('',*,*,#115656,.F.); +#115656 = EDGE_CURVE('',#115657,#115659,#115661,.T.); +#115657 = VERTEX_POINT('',#115658); +#115658 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115659 = VERTEX_POINT('',#115660); +#115660 = CARTESIAN_POINT('',(0.1,-20.77,0.2)); +#115661 = LINE('',#115662,#115663); +#115662 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115663 = VECTOR('',#115664,1.); +#115664 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115665 = ORIENTED_EDGE('',*,*,#115666,.T.); +#115666 = EDGE_CURVE('',#115657,#115667,#115669,.T.); +#115667 = VERTEX_POINT('',#115668); +#115668 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#115669 = LINE('',#115670,#115671); +#115670 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115671 = VECTOR('',#115672,1.); +#115672 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115673 = ORIENTED_EDGE('',*,*,#115674,.F.); +#115674 = EDGE_CURVE('',#115675,#115667,#115677,.T.); +#115675 = VERTEX_POINT('',#115676); +#115676 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#115677 = LINE('',#115678,#115679); +#115678 = CARTESIAN_POINT('',(-0.1,-15.875,0.2)); +#115679 = VECTOR('',#115680,1.); +#115680 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115681 = ORIENTED_EDGE('',*,*,#115682,.T.); +#115682 = EDGE_CURVE('',#115675,#115683,#115685,.T.); +#115683 = VERTEX_POINT('',#115684); +#115684 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#115685 = LINE('',#115686,#115687); +#115686 = CARTESIAN_POINT('',(-0.1,-20.77,0.2)); +#115687 = VECTOR('',#115688,1.); +#115688 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115689 = ORIENTED_EDGE('',*,*,#115690,.T.); +#115690 = EDGE_CURVE('',#115683,#115691,#115693,.T.); +#115691 = VERTEX_POINT('',#115692); +#115692 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#115693 = LINE('',#115694,#115695); +#115694 = CARTESIAN_POINT('',(-0.1,-19.87,0.2)); +#115695 = VECTOR('',#115696,1.); +#115696 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115697 = ORIENTED_EDGE('',*,*,#115698,.T.); +#115698 = EDGE_CURVE('',#115691,#115699,#115701,.T.); +#115699 = VERTEX_POINT('',#115700); +#115700 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#115701 = LINE('',#115702,#115703); +#115702 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#115703 = VECTOR('',#115704,1.); +#115704 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115705 = ORIENTED_EDGE('',*,*,#115706,.T.); +#115706 = EDGE_CURVE('',#115699,#115707,#115709,.T.); +#115707 = VERTEX_POINT('',#115708); +#115708 = CARTESIAN_POINT('',(0.1,-20.62,0.2)); +#115709 = LINE('',#115710,#115711); +#115710 = CARTESIAN_POINT('',(0.1,-15.875,0.2)); +#115711 = VECTOR('',#115712,1.); +#115712 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115713 = ORIENTED_EDGE('',*,*,#115714,.T.); +#115714 = EDGE_CURVE('',#115707,#115659,#115715,.T.); +#115715 = LINE('',#115716,#115717); +#115716 = CARTESIAN_POINT('',(0.1,-19.87,0.2)); +#115717 = VECTOR('',#115718,1.); +#115718 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115719 = FACE_BOUND('',#115720,.F.); +#115720 = EDGE_LOOP('',(#115721,#115731,#115739,#115747,#115755,#115763, + #115771,#115779)); +#115721 = ORIENTED_EDGE('',*,*,#115722,.F.); +#115722 = EDGE_CURVE('',#115723,#115725,#115727,.T.); +#115723 = VERTEX_POINT('',#115724); +#115724 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115725 = VERTEX_POINT('',#115726); +#115726 = CARTESIAN_POINT('',(0.1,-18.23,0.2)); +#115727 = LINE('',#115728,#115729); +#115728 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115729 = VECTOR('',#115730,1.); +#115730 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115731 = ORIENTED_EDGE('',*,*,#115732,.T.); +#115732 = EDGE_CURVE('',#115723,#115733,#115735,.T.); +#115733 = VERTEX_POINT('',#115734); +#115734 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#115735 = LINE('',#115736,#115737); +#115736 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115737 = VECTOR('',#115738,1.); +#115738 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115739 = ORIENTED_EDGE('',*,*,#115740,.F.); +#115740 = EDGE_CURVE('',#115741,#115733,#115743,.T.); +#115741 = VERTEX_POINT('',#115742); +#115742 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#115743 = LINE('',#115744,#115745); +#115744 = CARTESIAN_POINT('',(-0.1,-14.605,0.2)); +#115745 = VECTOR('',#115746,1.); +#115746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115747 = ORIENTED_EDGE('',*,*,#115748,.T.); +#115748 = EDGE_CURVE('',#115741,#115749,#115751,.T.); +#115749 = VERTEX_POINT('',#115750); +#115750 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#115751 = LINE('',#115752,#115753); +#115752 = CARTESIAN_POINT('',(-0.1,-18.23,0.2)); +#115753 = VECTOR('',#115754,1.); +#115754 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115755 = ORIENTED_EDGE('',*,*,#115756,.T.); +#115756 = EDGE_CURVE('',#115749,#115757,#115759,.T.); +#115757 = VERTEX_POINT('',#115758); +#115758 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#115759 = LINE('',#115760,#115761); +#115760 = CARTESIAN_POINT('',(-0.1,-17.33,0.2)); +#115761 = VECTOR('',#115762,1.); +#115762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115763 = ORIENTED_EDGE('',*,*,#115764,.T.); +#115764 = EDGE_CURVE('',#115757,#115765,#115767,.T.); +#115765 = VERTEX_POINT('',#115766); +#115766 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#115767 = LINE('',#115768,#115769); +#115768 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#115769 = VECTOR('',#115770,1.); +#115770 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115771 = ORIENTED_EDGE('',*,*,#115772,.T.); +#115772 = EDGE_CURVE('',#115765,#115773,#115775,.T.); +#115773 = VERTEX_POINT('',#115774); +#115774 = CARTESIAN_POINT('',(0.1,-18.08,0.2)); +#115775 = LINE('',#115776,#115777); +#115776 = CARTESIAN_POINT('',(0.1,-14.605,0.2)); +#115777 = VECTOR('',#115778,1.); +#115778 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115779 = ORIENTED_EDGE('',*,*,#115780,.T.); +#115780 = EDGE_CURVE('',#115773,#115725,#115781,.T.); +#115781 = LINE('',#115782,#115783); +#115782 = CARTESIAN_POINT('',(0.1,-17.33,0.2)); +#115783 = VECTOR('',#115784,1.); +#115784 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115785 = FACE_BOUND('',#115786,.F.); +#115786 = EDGE_LOOP('',(#115787,#115797,#115805,#115813,#115821,#115829, + #115837,#115845)); +#115787 = ORIENTED_EDGE('',*,*,#115788,.F.); +#115788 = EDGE_CURVE('',#115789,#115791,#115793,.T.); +#115789 = VERTEX_POINT('',#115790); +#115790 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115791 = VERTEX_POINT('',#115792); +#115792 = CARTESIAN_POINT('',(0.1,-15.69,0.2)); +#115793 = LINE('',#115794,#115795); +#115794 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115795 = VECTOR('',#115796,1.); +#115796 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115797 = ORIENTED_EDGE('',*,*,#115798,.T.); +#115798 = EDGE_CURVE('',#115789,#115799,#115801,.T.); +#115799 = VERTEX_POINT('',#115800); +#115800 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#115801 = LINE('',#115802,#115803); +#115802 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115803 = VECTOR('',#115804,1.); +#115804 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115805 = ORIENTED_EDGE('',*,*,#115806,.F.); +#115806 = EDGE_CURVE('',#115807,#115799,#115809,.T.); +#115807 = VERTEX_POINT('',#115808); +#115808 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#115809 = LINE('',#115810,#115811); +#115810 = CARTESIAN_POINT('',(-0.1,-13.335,0.2)); +#115811 = VECTOR('',#115812,1.); +#115812 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115813 = ORIENTED_EDGE('',*,*,#115814,.T.); +#115814 = EDGE_CURVE('',#115807,#115815,#115817,.T.); +#115815 = VERTEX_POINT('',#115816); +#115816 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#115817 = LINE('',#115818,#115819); +#115818 = CARTESIAN_POINT('',(-0.1,-15.69,0.2)); +#115819 = VECTOR('',#115820,1.); +#115820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115821 = ORIENTED_EDGE('',*,*,#115822,.T.); +#115822 = EDGE_CURVE('',#115815,#115823,#115825,.T.); +#115823 = VERTEX_POINT('',#115824); +#115824 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#115825 = LINE('',#115826,#115827); +#115826 = CARTESIAN_POINT('',(-0.1,-14.79,0.2)); +#115827 = VECTOR('',#115828,1.); +#115828 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115829 = ORIENTED_EDGE('',*,*,#115830,.T.); +#115830 = EDGE_CURVE('',#115823,#115831,#115833,.T.); +#115831 = VERTEX_POINT('',#115832); +#115832 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#115833 = LINE('',#115834,#115835); +#115834 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#115835 = VECTOR('',#115836,1.); +#115836 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115837 = ORIENTED_EDGE('',*,*,#115838,.T.); +#115838 = EDGE_CURVE('',#115831,#115839,#115841,.T.); +#115839 = VERTEX_POINT('',#115840); +#115840 = CARTESIAN_POINT('',(0.1,-15.54,0.2)); +#115841 = LINE('',#115842,#115843); +#115842 = CARTESIAN_POINT('',(0.1,-13.335,0.2)); +#115843 = VECTOR('',#115844,1.); +#115844 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115845 = ORIENTED_EDGE('',*,*,#115846,.T.); +#115846 = EDGE_CURVE('',#115839,#115791,#115847,.T.); +#115847 = LINE('',#115848,#115849); +#115848 = CARTESIAN_POINT('',(0.1,-14.79,0.2)); +#115849 = VECTOR('',#115850,1.); +#115850 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115851 = FACE_BOUND('',#115852,.F.); +#115852 = EDGE_LOOP('',(#115853,#115863,#115871,#115879,#115887,#115895, + #115903,#115911)); +#115853 = ORIENTED_EDGE('',*,*,#115854,.F.); +#115854 = EDGE_CURVE('',#115855,#115857,#115859,.T.); +#115855 = VERTEX_POINT('',#115856); +#115856 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115857 = VERTEX_POINT('',#115858); +#115858 = CARTESIAN_POINT('',(0.1,-13.15,0.2)); +#115859 = LINE('',#115860,#115861); +#115860 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115861 = VECTOR('',#115862,1.); +#115862 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115863 = ORIENTED_EDGE('',*,*,#115864,.T.); +#115864 = EDGE_CURVE('',#115855,#115865,#115867,.T.); +#115865 = VERTEX_POINT('',#115866); +#115866 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#115867 = LINE('',#115868,#115869); +#115868 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115869 = VECTOR('',#115870,1.); +#115870 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115871 = ORIENTED_EDGE('',*,*,#115872,.F.); +#115872 = EDGE_CURVE('',#115873,#115865,#115875,.T.); +#115873 = VERTEX_POINT('',#115874); +#115874 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#115875 = LINE('',#115876,#115877); +#115876 = CARTESIAN_POINT('',(-0.1,-12.065,0.2)); +#115877 = VECTOR('',#115878,1.); +#115878 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115879 = ORIENTED_EDGE('',*,*,#115880,.T.); +#115880 = EDGE_CURVE('',#115873,#115881,#115883,.T.); +#115881 = VERTEX_POINT('',#115882); +#115882 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#115883 = LINE('',#115884,#115885); +#115884 = CARTESIAN_POINT('',(-0.1,-13.15,0.2)); +#115885 = VECTOR('',#115886,1.); +#115886 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115887 = ORIENTED_EDGE('',*,*,#115888,.T.); +#115888 = EDGE_CURVE('',#115881,#115889,#115891,.T.); +#115889 = VERTEX_POINT('',#115890); +#115890 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#115891 = LINE('',#115892,#115893); +#115892 = CARTESIAN_POINT('',(-0.1,-12.25,0.2)); +#115893 = VECTOR('',#115894,1.); +#115894 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115895 = ORIENTED_EDGE('',*,*,#115896,.T.); +#115896 = EDGE_CURVE('',#115889,#115897,#115899,.T.); +#115897 = VERTEX_POINT('',#115898); +#115898 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#115899 = LINE('',#115900,#115901); +#115900 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#115901 = VECTOR('',#115902,1.); +#115902 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115903 = ORIENTED_EDGE('',*,*,#115904,.T.); +#115904 = EDGE_CURVE('',#115897,#115905,#115907,.T.); +#115905 = VERTEX_POINT('',#115906); +#115906 = CARTESIAN_POINT('',(0.1,-13.,0.2)); +#115907 = LINE('',#115908,#115909); +#115908 = CARTESIAN_POINT('',(0.1,-12.065,0.2)); +#115909 = VECTOR('',#115910,1.); +#115910 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115911 = ORIENTED_EDGE('',*,*,#115912,.T.); +#115912 = EDGE_CURVE('',#115905,#115857,#115913,.T.); +#115913 = LINE('',#115914,#115915); +#115914 = CARTESIAN_POINT('',(0.1,-12.25,0.2)); +#115915 = VECTOR('',#115916,1.); +#115916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115917 = FACE_BOUND('',#115918,.F.); +#115918 = EDGE_LOOP('',(#115919,#115929,#115937,#115945,#115953,#115961, + #115969,#115977)); +#115919 = ORIENTED_EDGE('',*,*,#115920,.F.); +#115920 = EDGE_CURVE('',#115921,#115923,#115925,.T.); +#115921 = VERTEX_POINT('',#115922); +#115922 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115923 = VERTEX_POINT('',#115924); +#115924 = CARTESIAN_POINT('',(0.1,-10.61,0.2)); +#115925 = LINE('',#115926,#115927); +#115926 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115927 = VECTOR('',#115928,1.); +#115928 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115929 = ORIENTED_EDGE('',*,*,#115930,.T.); +#115930 = EDGE_CURVE('',#115921,#115931,#115933,.T.); +#115931 = VERTEX_POINT('',#115932); +#115932 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#115933 = LINE('',#115934,#115935); +#115934 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115935 = VECTOR('',#115936,1.); +#115936 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115937 = ORIENTED_EDGE('',*,*,#115938,.F.); +#115938 = EDGE_CURVE('',#115939,#115931,#115941,.T.); +#115939 = VERTEX_POINT('',#115940); +#115940 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#115941 = LINE('',#115942,#115943); +#115942 = CARTESIAN_POINT('',(-0.1,-10.795,0.2)); +#115943 = VECTOR('',#115944,1.); +#115944 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115945 = ORIENTED_EDGE('',*,*,#115946,.T.); +#115946 = EDGE_CURVE('',#115939,#115947,#115949,.T.); +#115947 = VERTEX_POINT('',#115948); +#115948 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#115949 = LINE('',#115950,#115951); +#115950 = CARTESIAN_POINT('',(-0.1,-10.61,0.2)); +#115951 = VECTOR('',#115952,1.); +#115952 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115953 = ORIENTED_EDGE('',*,*,#115954,.T.); +#115954 = EDGE_CURVE('',#115947,#115955,#115957,.T.); +#115955 = VERTEX_POINT('',#115956); +#115956 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#115957 = LINE('',#115958,#115959); +#115958 = CARTESIAN_POINT('',(-0.1,-9.71,0.2)); +#115959 = VECTOR('',#115960,1.); +#115960 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115961 = ORIENTED_EDGE('',*,*,#115962,.T.); +#115962 = EDGE_CURVE('',#115955,#115963,#115965,.T.); +#115963 = VERTEX_POINT('',#115964); +#115964 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#115965 = LINE('',#115966,#115967); +#115966 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#115967 = VECTOR('',#115968,1.); +#115968 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115969 = ORIENTED_EDGE('',*,*,#115970,.T.); +#115970 = EDGE_CURVE('',#115963,#115971,#115973,.T.); +#115971 = VERTEX_POINT('',#115972); +#115972 = CARTESIAN_POINT('',(0.1,-10.46,0.2)); +#115973 = LINE('',#115974,#115975); +#115974 = CARTESIAN_POINT('',(0.1,-10.795,0.2)); +#115975 = VECTOR('',#115976,1.); +#115976 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115977 = ORIENTED_EDGE('',*,*,#115978,.T.); +#115978 = EDGE_CURVE('',#115971,#115923,#115979,.T.); +#115979 = LINE('',#115980,#115981); +#115980 = CARTESIAN_POINT('',(0.1,-9.71,0.2)); +#115981 = VECTOR('',#115982,1.); +#115982 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#115983 = FACE_BOUND('',#115984,.F.); +#115984 = EDGE_LOOP('',(#115985,#115995,#116003,#116011,#116019,#116027, + #116035,#116043)); +#115985 = ORIENTED_EDGE('',*,*,#115986,.F.); +#115986 = EDGE_CURVE('',#115987,#115989,#115991,.T.); +#115987 = VERTEX_POINT('',#115988); +#115988 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#115989 = VERTEX_POINT('',#115990); +#115990 = CARTESIAN_POINT('',(0.1,-8.07,0.2)); +#115991 = LINE('',#115992,#115993); +#115992 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#115993 = VECTOR('',#115994,1.); +#115994 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#115995 = ORIENTED_EDGE('',*,*,#115996,.T.); +#115996 = EDGE_CURVE('',#115987,#115997,#115999,.T.); +#115997 = VERTEX_POINT('',#115998); +#115998 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#115999 = LINE('',#116000,#116001); +#116000 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#116001 = VECTOR('',#116002,1.); +#116002 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116003 = ORIENTED_EDGE('',*,*,#116004,.F.); +#116004 = EDGE_CURVE('',#116005,#115997,#116007,.T.); +#116005 = VERTEX_POINT('',#116006); +#116006 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#116007 = LINE('',#116008,#116009); +#116008 = CARTESIAN_POINT('',(-0.1,-9.525,0.2)); +#116009 = VECTOR('',#116010,1.); +#116010 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116011 = ORIENTED_EDGE('',*,*,#116012,.T.); +#116012 = EDGE_CURVE('',#116005,#116013,#116015,.T.); +#116013 = VERTEX_POINT('',#116014); +#116014 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#116015 = LINE('',#116016,#116017); +#116016 = CARTESIAN_POINT('',(-0.1,-8.07,0.2)); +#116017 = VECTOR('',#116018,1.); +#116018 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116019 = ORIENTED_EDGE('',*,*,#116020,.T.); +#116020 = EDGE_CURVE('',#116013,#116021,#116023,.T.); +#116021 = VERTEX_POINT('',#116022); +#116022 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#116023 = LINE('',#116024,#116025); +#116024 = CARTESIAN_POINT('',(-0.1,-7.17,0.2)); +#116025 = VECTOR('',#116026,1.); +#116026 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116027 = ORIENTED_EDGE('',*,*,#116028,.T.); +#116028 = EDGE_CURVE('',#116021,#116029,#116031,.T.); +#116029 = VERTEX_POINT('',#116030); +#116030 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#116031 = LINE('',#116032,#116033); +#116032 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#116033 = VECTOR('',#116034,1.); +#116034 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116035 = ORIENTED_EDGE('',*,*,#116036,.T.); +#116036 = EDGE_CURVE('',#116029,#116037,#116039,.T.); +#116037 = VERTEX_POINT('',#116038); +#116038 = CARTESIAN_POINT('',(0.1,-7.92,0.2)); +#116039 = LINE('',#116040,#116041); +#116040 = CARTESIAN_POINT('',(0.1,-9.525,0.2)); +#116041 = VECTOR('',#116042,1.); +#116042 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116043 = ORIENTED_EDGE('',*,*,#116044,.T.); +#116044 = EDGE_CURVE('',#116037,#115989,#116045,.T.); +#116045 = LINE('',#116046,#116047); +#116046 = CARTESIAN_POINT('',(0.1,-7.17,0.2)); +#116047 = VECTOR('',#116048,1.); +#116048 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116049 = FACE_BOUND('',#116050,.F.); +#116050 = EDGE_LOOP('',(#116051,#116061,#116069,#116077,#116085,#116093, + #116101,#116109)); +#116051 = ORIENTED_EDGE('',*,*,#116052,.F.); +#116052 = EDGE_CURVE('',#116053,#116055,#116057,.T.); +#116053 = VERTEX_POINT('',#116054); +#116054 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116055 = VERTEX_POINT('',#116056); +#116056 = CARTESIAN_POINT('',(0.1,-5.53,0.2)); +#116057 = LINE('',#116058,#116059); +#116058 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116059 = VECTOR('',#116060,1.); +#116060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116061 = ORIENTED_EDGE('',*,*,#116062,.T.); +#116062 = EDGE_CURVE('',#116053,#116063,#116065,.T.); +#116063 = VERTEX_POINT('',#116064); +#116064 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#116065 = LINE('',#116066,#116067); +#116066 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116067 = VECTOR('',#116068,1.); +#116068 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116069 = ORIENTED_EDGE('',*,*,#116070,.F.); +#116070 = EDGE_CURVE('',#116071,#116063,#116073,.T.); +#116071 = VERTEX_POINT('',#116072); +#116072 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#116073 = LINE('',#116074,#116075); +#116074 = CARTESIAN_POINT('',(-0.1,-8.255,0.2)); +#116075 = VECTOR('',#116076,1.); +#116076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116077 = ORIENTED_EDGE('',*,*,#116078,.T.); +#116078 = EDGE_CURVE('',#116071,#116079,#116081,.T.); +#116079 = VERTEX_POINT('',#116080); +#116080 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#116081 = LINE('',#116082,#116083); +#116082 = CARTESIAN_POINT('',(-0.1,-5.53,0.2)); +#116083 = VECTOR('',#116084,1.); +#116084 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116085 = ORIENTED_EDGE('',*,*,#116086,.T.); +#116086 = EDGE_CURVE('',#116079,#116087,#116089,.T.); +#116087 = VERTEX_POINT('',#116088); +#116088 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#116089 = LINE('',#116090,#116091); +#116090 = CARTESIAN_POINT('',(-0.1,-4.63,0.2)); +#116091 = VECTOR('',#116092,1.); +#116092 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116093 = ORIENTED_EDGE('',*,*,#116094,.T.); +#116094 = EDGE_CURVE('',#116087,#116095,#116097,.T.); +#116095 = VERTEX_POINT('',#116096); +#116096 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#116097 = LINE('',#116098,#116099); +#116098 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#116099 = VECTOR('',#116100,1.); +#116100 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116101 = ORIENTED_EDGE('',*,*,#116102,.T.); +#116102 = EDGE_CURVE('',#116095,#116103,#116105,.T.); +#116103 = VERTEX_POINT('',#116104); +#116104 = CARTESIAN_POINT('',(0.1,-5.38,0.2)); +#116105 = LINE('',#116106,#116107); +#116106 = CARTESIAN_POINT('',(0.1,-8.255,0.2)); +#116107 = VECTOR('',#116108,1.); +#116108 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116109 = ORIENTED_EDGE('',*,*,#116110,.T.); +#116110 = EDGE_CURVE('',#116103,#116055,#116111,.T.); +#116111 = LINE('',#116112,#116113); +#116112 = CARTESIAN_POINT('',(0.1,-4.63,0.2)); +#116113 = VECTOR('',#116114,1.); +#116114 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116115 = FACE_BOUND('',#116116,.F.); +#116116 = EDGE_LOOP('',(#116117,#116127,#116135,#116143,#116151,#116159, + #116167,#116175)); +#116117 = ORIENTED_EDGE('',*,*,#116118,.F.); +#116118 = EDGE_CURVE('',#116119,#116121,#116123,.T.); +#116119 = VERTEX_POINT('',#116120); +#116120 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116121 = VERTEX_POINT('',#116122); +#116122 = CARTESIAN_POINT('',(0.1,-2.99,0.2)); +#116123 = LINE('',#116124,#116125); +#116124 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116125 = VECTOR('',#116126,1.); +#116126 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116127 = ORIENTED_EDGE('',*,*,#116128,.T.); +#116128 = EDGE_CURVE('',#116119,#116129,#116131,.T.); +#116129 = VERTEX_POINT('',#116130); +#116130 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#116131 = LINE('',#116132,#116133); +#116132 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116133 = VECTOR('',#116134,1.); +#116134 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116135 = ORIENTED_EDGE('',*,*,#116136,.F.); +#116136 = EDGE_CURVE('',#116137,#116129,#116139,.T.); +#116137 = VERTEX_POINT('',#116138); +#116138 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#116139 = LINE('',#116140,#116141); +#116140 = CARTESIAN_POINT('',(-0.1,-6.985,0.2)); +#116141 = VECTOR('',#116142,1.); +#116142 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116143 = ORIENTED_EDGE('',*,*,#116144,.T.); +#116144 = EDGE_CURVE('',#116137,#116145,#116147,.T.); +#116145 = VERTEX_POINT('',#116146); +#116146 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#116147 = LINE('',#116148,#116149); +#116148 = CARTESIAN_POINT('',(-0.1,-2.99,0.2)); +#116149 = VECTOR('',#116150,1.); +#116150 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116151 = ORIENTED_EDGE('',*,*,#116152,.T.); +#116152 = EDGE_CURVE('',#116145,#116153,#116155,.T.); +#116153 = VERTEX_POINT('',#116154); +#116154 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#116155 = LINE('',#116156,#116157); +#116156 = CARTESIAN_POINT('',(-0.1,-2.09,0.2)); +#116157 = VECTOR('',#116158,1.); +#116158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116159 = ORIENTED_EDGE('',*,*,#116160,.T.); +#116160 = EDGE_CURVE('',#116153,#116161,#116163,.T.); +#116161 = VERTEX_POINT('',#116162); +#116162 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#116163 = LINE('',#116164,#116165); +#116164 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#116165 = VECTOR('',#116166,1.); +#116166 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116167 = ORIENTED_EDGE('',*,*,#116168,.T.); +#116168 = EDGE_CURVE('',#116161,#116169,#116171,.T.); +#116169 = VERTEX_POINT('',#116170); +#116170 = CARTESIAN_POINT('',(0.1,-2.84,0.2)); +#116171 = LINE('',#116172,#116173); +#116172 = CARTESIAN_POINT('',(0.1,-6.985,0.2)); +#116173 = VECTOR('',#116174,1.); +#116174 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116175 = ORIENTED_EDGE('',*,*,#116176,.T.); +#116176 = EDGE_CURVE('',#116169,#116121,#116177,.T.); +#116177 = LINE('',#116178,#116179); +#116178 = CARTESIAN_POINT('',(0.1,-2.09,0.2)); +#116179 = VECTOR('',#116180,1.); +#116180 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116181 = FACE_BOUND('',#116182,.F.); +#116182 = EDGE_LOOP('',(#116183,#116193,#116201,#116209,#116217,#116225, + #116233,#116241)); +#116183 = ORIENTED_EDGE('',*,*,#116184,.F.); +#116184 = EDGE_CURVE('',#116185,#116187,#116189,.T.); +#116185 = VERTEX_POINT('',#116186); +#116186 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116187 = VERTEX_POINT('',#116188); +#116188 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#116189 = LINE('',#116190,#116191); +#116190 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116191 = VECTOR('',#116192,1.); +#116192 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116193 = ORIENTED_EDGE('',*,*,#116194,.T.); +#116194 = EDGE_CURVE('',#116185,#116195,#116197,.T.); +#116195 = VERTEX_POINT('',#116196); +#116196 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#116197 = LINE('',#116198,#116199); +#116198 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116199 = VECTOR('',#116200,1.); +#116200 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116201 = ORIENTED_EDGE('',*,*,#116202,.F.); +#116202 = EDGE_CURVE('',#116203,#116195,#116205,.T.); +#116203 = VERTEX_POINT('',#116204); +#116204 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#116205 = LINE('',#116206,#116207); +#116206 = CARTESIAN_POINT('',(-0.1,-5.715,0.2)); +#116207 = VECTOR('',#116208,1.); +#116208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116209 = ORIENTED_EDGE('',*,*,#116210,.T.); +#116210 = EDGE_CURVE('',#116203,#116211,#116213,.T.); +#116211 = VERTEX_POINT('',#116212); +#116212 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#116213 = LINE('',#116214,#116215); +#116214 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#116215 = VECTOR('',#116216,1.); +#116216 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116217 = ORIENTED_EDGE('',*,*,#116218,.T.); +#116218 = EDGE_CURVE('',#116211,#116219,#116221,.T.); +#116219 = VERTEX_POINT('',#116220); +#116220 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#116221 = LINE('',#116222,#116223); +#116222 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#116223 = VECTOR('',#116224,1.); +#116224 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116225 = ORIENTED_EDGE('',*,*,#116226,.T.); +#116226 = EDGE_CURVE('',#116219,#116227,#116229,.T.); +#116227 = VERTEX_POINT('',#116228); +#116228 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#116229 = LINE('',#116230,#116231); +#116230 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#116231 = VECTOR('',#116232,1.); +#116232 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116233 = ORIENTED_EDGE('',*,*,#116234,.T.); +#116234 = EDGE_CURVE('',#116227,#116235,#116237,.T.); +#116235 = VERTEX_POINT('',#116236); +#116236 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#116237 = LINE('',#116238,#116239); +#116238 = CARTESIAN_POINT('',(0.1,-5.715,0.2)); +#116239 = VECTOR('',#116240,1.); +#116240 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116241 = ORIENTED_EDGE('',*,*,#116242,.T.); +#116242 = EDGE_CURVE('',#116235,#116187,#116243,.T.); +#116243 = LINE('',#116244,#116245); +#116244 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#116245 = VECTOR('',#116246,1.); +#116246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116247 = PLANE('',#116248); +#116248 = AXIS2_PLACEMENT_3D('',#116249,#116250,#116251); +#116249 = CARTESIAN_POINT('',(-1.241229341531E-15,-11.43,0.2)); +#116250 = DIRECTION('',(0.,0.,1.)); +#116251 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#116252 = ADVANCED_FACE('',(#116253),#116259,.T.); +#116253 = FACE_BOUND('',#116254,.T.); +#116254 = EDGE_LOOP('',(#116255,#116256,#116257,#116258)); +#116255 = ORIENTED_EDGE('',*,*,#115073,.T.); +#116256 = ORIENTED_EDGE('',*,*,#115579,.T.); +#116257 = ORIENTED_EDGE('',*,*,#115152,.F.); +#116258 = ORIENTED_EDGE('',*,*,#115169,.F.); +#116259 = PLANE('',#116260); +#116260 = AXIS2_PLACEMENT_3D('',#116261,#116262,#116263); +#116261 = CARTESIAN_POINT('',(0.846666666667,-24.13,0.)); +#116262 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116263 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116264 = ADVANCED_FACE('',(#116265),#116271,.F.); +#116265 = FACE_BOUND('',#116266,.F.); +#116266 = EDGE_LOOP('',(#116267,#116268,#116269,#116270)); +#116267 = ORIENTED_EDGE('',*,*,#115120,.T.); +#116268 = ORIENTED_EDGE('',*,*,#115185,.T.); +#116269 = ORIENTED_EDGE('',*,*,#115050,.F.); +#116270 = ORIENTED_EDGE('',*,*,#115548,.F.); +#116271 = PLANE('',#116272); +#116272 = AXIS2_PLACEMENT_3D('',#116273,#116274,#116275); +#116273 = CARTESIAN_POINT('',(-1.27,1.27,0.)); +#116274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116275 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116276 = ADVANCED_FACE('',(#116277),#116302,.T.); +#116277 = FACE_BOUND('',#116278,.T.); +#116278 = EDGE_LOOP('',(#116279,#116287,#116288,#116296)); +#116279 = ORIENTED_EDGE('',*,*,#116280,.F.); +#116280 = EDGE_CURVE('',#115195,#116281,#116283,.T.); +#116281 = VERTEX_POINT('',#116282); +#116282 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#116283 = LINE('',#116284,#116285); +#116284 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#116285 = VECTOR('',#116286,1.); +#116286 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116287 = ORIENTED_EDGE('',*,*,#115194,.T.); +#116288 = ORIENTED_EDGE('',*,*,#116289,.T.); +#116289 = EDGE_CURVE('',#115197,#116290,#116292,.T.); +#116290 = VERTEX_POINT('',#116291); +#116291 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#116292 = LINE('',#116293,#116294); +#116293 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#116294 = VECTOR('',#116295,1.); +#116295 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116296 = ORIENTED_EDGE('',*,*,#116297,.F.); +#116297 = EDGE_CURVE('',#116281,#116290,#116298,.T.); +#116298 = LINE('',#116299,#116300); +#116299 = CARTESIAN_POINT('',(0.3,-23.46,8.2)); +#116300 = VECTOR('',#116301,1.); +#116301 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116302 = PLANE('',#116303); +#116303 = AXIS2_PLACEMENT_3D('',#116304,#116305,#116306); +#116304 = CARTESIAN_POINT('',(0.45,-23.46,8.35)); +#116305 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116306 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116307 = ADVANCED_FACE('',(#116308),#116326,.T.); +#116308 = FACE_BOUND('',#116309,.T.); +#116309 = EDGE_LOOP('',(#116310,#116311,#116312,#116320)); +#116310 = ORIENTED_EDGE('',*,*,#116289,.F.); +#116311 = ORIENTED_EDGE('',*,*,#115220,.T.); +#116312 = ORIENTED_EDGE('',*,*,#116313,.T.); +#116313 = EDGE_CURVE('',#115213,#116314,#116316,.T.); +#116314 = VERTEX_POINT('',#116315); +#116315 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#116316 = LINE('',#116317,#116318); +#116317 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#116318 = VECTOR('',#116319,1.); +#116319 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116320 = ORIENTED_EDGE('',*,*,#116321,.F.); +#116321 = EDGE_CURVE('',#116290,#116314,#116322,.T.); +#116322 = LINE('',#116323,#116324); +#116323 = CARTESIAN_POINT('',(0.6,-22.56,8.2)); +#116324 = VECTOR('',#116325,1.); +#116325 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116326 = PLANE('',#116327); +#116327 = AXIS2_PLACEMENT_3D('',#116328,#116329,#116330); +#116328 = CARTESIAN_POINT('',(0.6,-22.41,8.35)); +#116329 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116330 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116331 = ADVANCED_FACE('',(#116332),#116350,.T.); +#116332 = FACE_BOUND('',#116333,.T.); +#116333 = EDGE_LOOP('',(#116334,#116335,#116336,#116344)); +#116334 = ORIENTED_EDGE('',*,*,#116313,.F.); +#116335 = ORIENTED_EDGE('',*,*,#115212,.T.); +#116336 = ORIENTED_EDGE('',*,*,#116337,.T.); +#116337 = EDGE_CURVE('',#115205,#116338,#116340,.T.); +#116338 = VERTEX_POINT('',#116339); +#116339 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#116340 = LINE('',#116341,#116342); +#116341 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#116342 = VECTOR('',#116343,1.); +#116343 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116344 = ORIENTED_EDGE('',*,*,#116345,.F.); +#116345 = EDGE_CURVE('',#116314,#116338,#116346,.T.); +#116346 = LINE('',#116347,#116348); +#116347 = CARTESIAN_POINT('',(-0.3,-22.26,8.2)); +#116348 = VECTOR('',#116349,1.); +#116349 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116350 = PLANE('',#116351); +#116351 = AXIS2_PLACEMENT_3D('',#116352,#116353,#116354); +#116352 = CARTESIAN_POINT('',(-0.45,-22.26,8.35)); +#116353 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116354 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116355 = ADVANCED_FACE('',(#116356),#116367,.T.); +#116356 = FACE_BOUND('',#116357,.T.); +#116357 = EDGE_LOOP('',(#116358,#116359,#116360,#116361)); +#116358 = ORIENTED_EDGE('',*,*,#116337,.F.); +#116359 = ORIENTED_EDGE('',*,*,#115204,.T.); +#116360 = ORIENTED_EDGE('',*,*,#116280,.T.); +#116361 = ORIENTED_EDGE('',*,*,#116362,.F.); +#116362 = EDGE_CURVE('',#116338,#116281,#116363,.T.); +#116363 = LINE('',#116364,#116365); +#116364 = CARTESIAN_POINT('',(-0.6,-23.16,8.2)); +#116365 = VECTOR('',#116366,1.); +#116366 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116367 = PLANE('',#116368); +#116368 = AXIS2_PLACEMENT_3D('',#116369,#116370,#116371); +#116369 = CARTESIAN_POINT('',(-0.6,-23.31,8.35)); +#116370 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116371 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116372 = ADVANCED_FACE('',(#116373),#116398,.T.); +#116373 = FACE_BOUND('',#116374,.T.); +#116374 = EDGE_LOOP('',(#116375,#116383,#116384,#116392)); +#116375 = ORIENTED_EDGE('',*,*,#116376,.F.); +#116376 = EDGE_CURVE('',#115229,#116377,#116379,.T.); +#116377 = VERTEX_POINT('',#116378); +#116378 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#116379 = LINE('',#116380,#116381); +#116380 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#116381 = VECTOR('',#116382,1.); +#116382 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116383 = ORIENTED_EDGE('',*,*,#115228,.T.); +#116384 = ORIENTED_EDGE('',*,*,#116385,.T.); +#116385 = EDGE_CURVE('',#115231,#116386,#116388,.T.); +#116386 = VERTEX_POINT('',#116387); +#116387 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#116388 = LINE('',#116389,#116390); +#116389 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#116390 = VECTOR('',#116391,1.); +#116391 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116392 = ORIENTED_EDGE('',*,*,#116393,.F.); +#116393 = EDGE_CURVE('',#116377,#116386,#116394,.T.); +#116394 = LINE('',#116395,#116396); +#116395 = CARTESIAN_POINT('',(0.3,-20.92,8.2)); +#116396 = VECTOR('',#116397,1.); +#116397 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116398 = PLANE('',#116399); +#116399 = AXIS2_PLACEMENT_3D('',#116400,#116401,#116402); +#116400 = CARTESIAN_POINT('',(0.45,-20.92,8.35)); +#116401 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116402 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116403 = ADVANCED_FACE('',(#116404),#116422,.T.); +#116404 = FACE_BOUND('',#116405,.T.); +#116405 = EDGE_LOOP('',(#116406,#116407,#116408,#116416)); +#116406 = ORIENTED_EDGE('',*,*,#116385,.F.); +#116407 = ORIENTED_EDGE('',*,*,#115254,.T.); +#116408 = ORIENTED_EDGE('',*,*,#116409,.T.); +#116409 = EDGE_CURVE('',#115247,#116410,#116412,.T.); +#116410 = VERTEX_POINT('',#116411); +#116411 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#116412 = LINE('',#116413,#116414); +#116413 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#116414 = VECTOR('',#116415,1.); +#116415 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116416 = ORIENTED_EDGE('',*,*,#116417,.F.); +#116417 = EDGE_CURVE('',#116386,#116410,#116418,.T.); +#116418 = LINE('',#116419,#116420); +#116419 = CARTESIAN_POINT('',(0.6,-20.02,8.2)); +#116420 = VECTOR('',#116421,1.); +#116421 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116422 = PLANE('',#116423); +#116423 = AXIS2_PLACEMENT_3D('',#116424,#116425,#116426); +#116424 = CARTESIAN_POINT('',(0.6,-19.87,8.35)); +#116425 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116426 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116427 = ADVANCED_FACE('',(#116428),#116446,.T.); +#116428 = FACE_BOUND('',#116429,.T.); +#116429 = EDGE_LOOP('',(#116430,#116431,#116432,#116440)); +#116430 = ORIENTED_EDGE('',*,*,#116409,.F.); +#116431 = ORIENTED_EDGE('',*,*,#115246,.T.); +#116432 = ORIENTED_EDGE('',*,*,#116433,.T.); +#116433 = EDGE_CURVE('',#115239,#116434,#116436,.T.); +#116434 = VERTEX_POINT('',#116435); +#116435 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#116436 = LINE('',#116437,#116438); +#116437 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#116438 = VECTOR('',#116439,1.); +#116439 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116440 = ORIENTED_EDGE('',*,*,#116441,.F.); +#116441 = EDGE_CURVE('',#116410,#116434,#116442,.T.); +#116442 = LINE('',#116443,#116444); +#116443 = CARTESIAN_POINT('',(-0.3,-19.72,8.2)); +#116444 = VECTOR('',#116445,1.); +#116445 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116446 = PLANE('',#116447); +#116447 = AXIS2_PLACEMENT_3D('',#116448,#116449,#116450); +#116448 = CARTESIAN_POINT('',(-0.45,-19.72,8.35)); +#116449 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116450 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116451 = ADVANCED_FACE('',(#116452),#116463,.T.); +#116452 = FACE_BOUND('',#116453,.T.); +#116453 = EDGE_LOOP('',(#116454,#116455,#116456,#116457)); +#116454 = ORIENTED_EDGE('',*,*,#116433,.F.); +#116455 = ORIENTED_EDGE('',*,*,#115238,.T.); +#116456 = ORIENTED_EDGE('',*,*,#116376,.T.); +#116457 = ORIENTED_EDGE('',*,*,#116458,.F.); +#116458 = EDGE_CURVE('',#116434,#116377,#116459,.T.); +#116459 = LINE('',#116460,#116461); +#116460 = CARTESIAN_POINT('',(-0.6,-20.62,8.2)); +#116461 = VECTOR('',#116462,1.); +#116462 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116463 = PLANE('',#116464); +#116464 = AXIS2_PLACEMENT_3D('',#116465,#116466,#116467); +#116465 = CARTESIAN_POINT('',(-0.6,-20.77,8.35)); +#116466 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116467 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116468 = ADVANCED_FACE('',(#116469),#116494,.T.); +#116469 = FACE_BOUND('',#116470,.T.); +#116470 = EDGE_LOOP('',(#116471,#116479,#116480,#116488)); +#116471 = ORIENTED_EDGE('',*,*,#116472,.F.); +#116472 = EDGE_CURVE('',#115263,#116473,#116475,.T.); +#116473 = VERTEX_POINT('',#116474); +#116474 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#116475 = LINE('',#116476,#116477); +#116476 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#116477 = VECTOR('',#116478,1.); +#116478 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116479 = ORIENTED_EDGE('',*,*,#115262,.T.); +#116480 = ORIENTED_EDGE('',*,*,#116481,.T.); +#116481 = EDGE_CURVE('',#115265,#116482,#116484,.T.); +#116482 = VERTEX_POINT('',#116483); +#116483 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#116484 = LINE('',#116485,#116486); +#116485 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#116486 = VECTOR('',#116487,1.); +#116487 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116488 = ORIENTED_EDGE('',*,*,#116489,.F.); +#116489 = EDGE_CURVE('',#116473,#116482,#116490,.T.); +#116490 = LINE('',#116491,#116492); +#116491 = CARTESIAN_POINT('',(0.3,-18.38,8.2)); +#116492 = VECTOR('',#116493,1.); +#116493 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116494 = PLANE('',#116495); +#116495 = AXIS2_PLACEMENT_3D('',#116496,#116497,#116498); +#116496 = CARTESIAN_POINT('',(0.45,-18.38,8.35)); +#116497 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116498 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116499 = ADVANCED_FACE('',(#116500),#116518,.T.); +#116500 = FACE_BOUND('',#116501,.T.); +#116501 = EDGE_LOOP('',(#116502,#116503,#116504,#116512)); +#116502 = ORIENTED_EDGE('',*,*,#116481,.F.); +#116503 = ORIENTED_EDGE('',*,*,#115288,.T.); +#116504 = ORIENTED_EDGE('',*,*,#116505,.T.); +#116505 = EDGE_CURVE('',#115281,#116506,#116508,.T.); +#116506 = VERTEX_POINT('',#116507); +#116507 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#116508 = LINE('',#116509,#116510); +#116509 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#116510 = VECTOR('',#116511,1.); +#116511 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116512 = ORIENTED_EDGE('',*,*,#116513,.F.); +#116513 = EDGE_CURVE('',#116482,#116506,#116514,.T.); +#116514 = LINE('',#116515,#116516); +#116515 = CARTESIAN_POINT('',(0.6,-17.48,8.2)); +#116516 = VECTOR('',#116517,1.); +#116517 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116518 = PLANE('',#116519); +#116519 = AXIS2_PLACEMENT_3D('',#116520,#116521,#116522); +#116520 = CARTESIAN_POINT('',(0.6,-17.33,8.35)); +#116521 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116522 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116523 = ADVANCED_FACE('',(#116524),#116542,.T.); +#116524 = FACE_BOUND('',#116525,.T.); +#116525 = EDGE_LOOP('',(#116526,#116527,#116528,#116536)); +#116526 = ORIENTED_EDGE('',*,*,#116505,.F.); +#116527 = ORIENTED_EDGE('',*,*,#115280,.T.); +#116528 = ORIENTED_EDGE('',*,*,#116529,.T.); +#116529 = EDGE_CURVE('',#115273,#116530,#116532,.T.); +#116530 = VERTEX_POINT('',#116531); +#116531 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#116532 = LINE('',#116533,#116534); +#116533 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#116534 = VECTOR('',#116535,1.); +#116535 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116536 = ORIENTED_EDGE('',*,*,#116537,.F.); +#116537 = EDGE_CURVE('',#116506,#116530,#116538,.T.); +#116538 = LINE('',#116539,#116540); +#116539 = CARTESIAN_POINT('',(-0.3,-17.18,8.2)); +#116540 = VECTOR('',#116541,1.); +#116541 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116542 = PLANE('',#116543); +#116543 = AXIS2_PLACEMENT_3D('',#116544,#116545,#116546); +#116544 = CARTESIAN_POINT('',(-0.45,-17.18,8.35)); +#116545 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116546 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116547 = ADVANCED_FACE('',(#116548),#116559,.T.); +#116548 = FACE_BOUND('',#116549,.T.); +#116549 = EDGE_LOOP('',(#116550,#116551,#116552,#116553)); +#116550 = ORIENTED_EDGE('',*,*,#116529,.F.); +#116551 = ORIENTED_EDGE('',*,*,#115272,.T.); +#116552 = ORIENTED_EDGE('',*,*,#116472,.T.); +#116553 = ORIENTED_EDGE('',*,*,#116554,.F.); +#116554 = EDGE_CURVE('',#116530,#116473,#116555,.T.); +#116555 = LINE('',#116556,#116557); +#116556 = CARTESIAN_POINT('',(-0.6,-18.08,8.2)); +#116557 = VECTOR('',#116558,1.); +#116558 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116559 = PLANE('',#116560); +#116560 = AXIS2_PLACEMENT_3D('',#116561,#116562,#116563); +#116561 = CARTESIAN_POINT('',(-0.6,-18.23,8.35)); +#116562 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116563 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116564 = ADVANCED_FACE('',(#116565),#116590,.T.); +#116565 = FACE_BOUND('',#116566,.T.); +#116566 = EDGE_LOOP('',(#116567,#116575,#116576,#116584)); +#116567 = ORIENTED_EDGE('',*,*,#116568,.F.); +#116568 = EDGE_CURVE('',#115297,#116569,#116571,.T.); +#116569 = VERTEX_POINT('',#116570); +#116570 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#116571 = LINE('',#116572,#116573); +#116572 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#116573 = VECTOR('',#116574,1.); +#116574 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116575 = ORIENTED_EDGE('',*,*,#115296,.T.); +#116576 = ORIENTED_EDGE('',*,*,#116577,.T.); +#116577 = EDGE_CURVE('',#115299,#116578,#116580,.T.); +#116578 = VERTEX_POINT('',#116579); +#116579 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#116580 = LINE('',#116581,#116582); +#116581 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#116582 = VECTOR('',#116583,1.); +#116583 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116584 = ORIENTED_EDGE('',*,*,#116585,.F.); +#116585 = EDGE_CURVE('',#116569,#116578,#116586,.T.); +#116586 = LINE('',#116587,#116588); +#116587 = CARTESIAN_POINT('',(0.3,-15.84,8.2)); +#116588 = VECTOR('',#116589,1.); +#116589 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116590 = PLANE('',#116591); +#116591 = AXIS2_PLACEMENT_3D('',#116592,#116593,#116594); +#116592 = CARTESIAN_POINT('',(0.45,-15.84,8.35)); +#116593 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116594 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116595 = ADVANCED_FACE('',(#116596),#116614,.T.); +#116596 = FACE_BOUND('',#116597,.T.); +#116597 = EDGE_LOOP('',(#116598,#116599,#116600,#116608)); +#116598 = ORIENTED_EDGE('',*,*,#116577,.F.); +#116599 = ORIENTED_EDGE('',*,*,#115322,.T.); +#116600 = ORIENTED_EDGE('',*,*,#116601,.T.); +#116601 = EDGE_CURVE('',#115315,#116602,#116604,.T.); +#116602 = VERTEX_POINT('',#116603); +#116603 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#116604 = LINE('',#116605,#116606); +#116605 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#116606 = VECTOR('',#116607,1.); +#116607 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116608 = ORIENTED_EDGE('',*,*,#116609,.F.); +#116609 = EDGE_CURVE('',#116578,#116602,#116610,.T.); +#116610 = LINE('',#116611,#116612); +#116611 = CARTESIAN_POINT('',(0.6,-14.94,8.2)); +#116612 = VECTOR('',#116613,1.); +#116613 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116614 = PLANE('',#116615); +#116615 = AXIS2_PLACEMENT_3D('',#116616,#116617,#116618); +#116616 = CARTESIAN_POINT('',(0.6,-14.79,8.35)); +#116617 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116618 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116619 = ADVANCED_FACE('',(#116620),#116638,.T.); +#116620 = FACE_BOUND('',#116621,.T.); +#116621 = EDGE_LOOP('',(#116622,#116623,#116624,#116632)); +#116622 = ORIENTED_EDGE('',*,*,#116601,.F.); +#116623 = ORIENTED_EDGE('',*,*,#115314,.T.); +#116624 = ORIENTED_EDGE('',*,*,#116625,.T.); +#116625 = EDGE_CURVE('',#115307,#116626,#116628,.T.); +#116626 = VERTEX_POINT('',#116627); +#116627 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#116628 = LINE('',#116629,#116630); +#116629 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#116630 = VECTOR('',#116631,1.); +#116631 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116632 = ORIENTED_EDGE('',*,*,#116633,.F.); +#116633 = EDGE_CURVE('',#116602,#116626,#116634,.T.); +#116634 = LINE('',#116635,#116636); +#116635 = CARTESIAN_POINT('',(-0.3,-14.64,8.2)); +#116636 = VECTOR('',#116637,1.); +#116637 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116638 = PLANE('',#116639); +#116639 = AXIS2_PLACEMENT_3D('',#116640,#116641,#116642); +#116640 = CARTESIAN_POINT('',(-0.45,-14.64,8.35)); +#116641 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116642 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116643 = ADVANCED_FACE('',(#116644),#116655,.T.); +#116644 = FACE_BOUND('',#116645,.T.); +#116645 = EDGE_LOOP('',(#116646,#116647,#116648,#116649)); +#116646 = ORIENTED_EDGE('',*,*,#116625,.F.); +#116647 = ORIENTED_EDGE('',*,*,#115306,.T.); +#116648 = ORIENTED_EDGE('',*,*,#116568,.T.); +#116649 = ORIENTED_EDGE('',*,*,#116650,.F.); +#116650 = EDGE_CURVE('',#116626,#116569,#116651,.T.); +#116651 = LINE('',#116652,#116653); +#116652 = CARTESIAN_POINT('',(-0.6,-15.54,8.2)); +#116653 = VECTOR('',#116654,1.); +#116654 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116655 = PLANE('',#116656); +#116656 = AXIS2_PLACEMENT_3D('',#116657,#116658,#116659); +#116657 = CARTESIAN_POINT('',(-0.6,-15.69,8.35)); +#116658 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116659 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116660 = ADVANCED_FACE('',(#116661),#116686,.T.); +#116661 = FACE_BOUND('',#116662,.T.); +#116662 = EDGE_LOOP('',(#116663,#116671,#116672,#116680)); +#116663 = ORIENTED_EDGE('',*,*,#116664,.F.); +#116664 = EDGE_CURVE('',#115331,#116665,#116667,.T.); +#116665 = VERTEX_POINT('',#116666); +#116666 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#116667 = LINE('',#116668,#116669); +#116668 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#116669 = VECTOR('',#116670,1.); +#116670 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116671 = ORIENTED_EDGE('',*,*,#115330,.T.); +#116672 = ORIENTED_EDGE('',*,*,#116673,.T.); +#116673 = EDGE_CURVE('',#115333,#116674,#116676,.T.); +#116674 = VERTEX_POINT('',#116675); +#116675 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#116676 = LINE('',#116677,#116678); +#116677 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#116678 = VECTOR('',#116679,1.); +#116679 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116680 = ORIENTED_EDGE('',*,*,#116681,.F.); +#116681 = EDGE_CURVE('',#116665,#116674,#116682,.T.); +#116682 = LINE('',#116683,#116684); +#116683 = CARTESIAN_POINT('',(0.3,-13.3,8.2)); +#116684 = VECTOR('',#116685,1.); +#116685 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116686 = PLANE('',#116687); +#116687 = AXIS2_PLACEMENT_3D('',#116688,#116689,#116690); +#116688 = CARTESIAN_POINT('',(0.45,-13.3,8.35)); +#116689 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116690 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116691 = ADVANCED_FACE('',(#116692),#116710,.T.); +#116692 = FACE_BOUND('',#116693,.T.); +#116693 = EDGE_LOOP('',(#116694,#116695,#116696,#116704)); +#116694 = ORIENTED_EDGE('',*,*,#116673,.F.); +#116695 = ORIENTED_EDGE('',*,*,#115356,.T.); +#116696 = ORIENTED_EDGE('',*,*,#116697,.T.); +#116697 = EDGE_CURVE('',#115349,#116698,#116700,.T.); +#116698 = VERTEX_POINT('',#116699); +#116699 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#116700 = LINE('',#116701,#116702); +#116701 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#116702 = VECTOR('',#116703,1.); +#116703 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116704 = ORIENTED_EDGE('',*,*,#116705,.F.); +#116705 = EDGE_CURVE('',#116674,#116698,#116706,.T.); +#116706 = LINE('',#116707,#116708); +#116707 = CARTESIAN_POINT('',(0.6,-12.4,8.2)); +#116708 = VECTOR('',#116709,1.); +#116709 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116710 = PLANE('',#116711); +#116711 = AXIS2_PLACEMENT_3D('',#116712,#116713,#116714); +#116712 = CARTESIAN_POINT('',(0.6,-12.25,8.35)); +#116713 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116714 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116715 = ADVANCED_FACE('',(#116716),#116734,.T.); +#116716 = FACE_BOUND('',#116717,.T.); +#116717 = EDGE_LOOP('',(#116718,#116719,#116720,#116728)); +#116718 = ORIENTED_EDGE('',*,*,#116697,.F.); +#116719 = ORIENTED_EDGE('',*,*,#115348,.T.); +#116720 = ORIENTED_EDGE('',*,*,#116721,.T.); +#116721 = EDGE_CURVE('',#115341,#116722,#116724,.T.); +#116722 = VERTEX_POINT('',#116723); +#116723 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#116724 = LINE('',#116725,#116726); +#116725 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#116726 = VECTOR('',#116727,1.); +#116727 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116728 = ORIENTED_EDGE('',*,*,#116729,.F.); +#116729 = EDGE_CURVE('',#116698,#116722,#116730,.T.); +#116730 = LINE('',#116731,#116732); +#116731 = CARTESIAN_POINT('',(-0.3,-12.1,8.2)); +#116732 = VECTOR('',#116733,1.); +#116733 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116734 = PLANE('',#116735); +#116735 = AXIS2_PLACEMENT_3D('',#116736,#116737,#116738); +#116736 = CARTESIAN_POINT('',(-0.45,-12.1,8.35)); +#116737 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116738 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116739 = ADVANCED_FACE('',(#116740),#116751,.T.); +#116740 = FACE_BOUND('',#116741,.T.); +#116741 = EDGE_LOOP('',(#116742,#116743,#116744,#116745)); +#116742 = ORIENTED_EDGE('',*,*,#116721,.F.); +#116743 = ORIENTED_EDGE('',*,*,#115340,.T.); +#116744 = ORIENTED_EDGE('',*,*,#116664,.T.); +#116745 = ORIENTED_EDGE('',*,*,#116746,.F.); +#116746 = EDGE_CURVE('',#116722,#116665,#116747,.T.); +#116747 = LINE('',#116748,#116749); +#116748 = CARTESIAN_POINT('',(-0.6,-13.,8.2)); +#116749 = VECTOR('',#116750,1.); +#116750 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116751 = PLANE('',#116752); +#116752 = AXIS2_PLACEMENT_3D('',#116753,#116754,#116755); +#116753 = CARTESIAN_POINT('',(-0.6,-13.15,8.35)); +#116754 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116755 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116756 = ADVANCED_FACE('',(#116757),#116782,.T.); +#116757 = FACE_BOUND('',#116758,.T.); +#116758 = EDGE_LOOP('',(#116759,#116767,#116768,#116776)); +#116759 = ORIENTED_EDGE('',*,*,#116760,.F.); +#116760 = EDGE_CURVE('',#115365,#116761,#116763,.T.); +#116761 = VERTEX_POINT('',#116762); +#116762 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#116763 = LINE('',#116764,#116765); +#116764 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#116765 = VECTOR('',#116766,1.); +#116766 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116767 = ORIENTED_EDGE('',*,*,#115364,.T.); +#116768 = ORIENTED_EDGE('',*,*,#116769,.T.); +#116769 = EDGE_CURVE('',#115367,#116770,#116772,.T.); +#116770 = VERTEX_POINT('',#116771); +#116771 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#116772 = LINE('',#116773,#116774); +#116773 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#116774 = VECTOR('',#116775,1.); +#116775 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116776 = ORIENTED_EDGE('',*,*,#116777,.F.); +#116777 = EDGE_CURVE('',#116761,#116770,#116778,.T.); +#116778 = LINE('',#116779,#116780); +#116779 = CARTESIAN_POINT('',(0.3,-10.76,8.2)); +#116780 = VECTOR('',#116781,1.); +#116781 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116782 = PLANE('',#116783); +#116783 = AXIS2_PLACEMENT_3D('',#116784,#116785,#116786); +#116784 = CARTESIAN_POINT('',(0.45,-10.76,8.35)); +#116785 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116786 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116787 = ADVANCED_FACE('',(#116788),#116806,.T.); +#116788 = FACE_BOUND('',#116789,.T.); +#116789 = EDGE_LOOP('',(#116790,#116791,#116792,#116800)); +#116790 = ORIENTED_EDGE('',*,*,#116769,.F.); +#116791 = ORIENTED_EDGE('',*,*,#115390,.T.); +#116792 = ORIENTED_EDGE('',*,*,#116793,.T.); +#116793 = EDGE_CURVE('',#115383,#116794,#116796,.T.); +#116794 = VERTEX_POINT('',#116795); +#116795 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#116796 = LINE('',#116797,#116798); +#116797 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#116798 = VECTOR('',#116799,1.); +#116799 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116800 = ORIENTED_EDGE('',*,*,#116801,.F.); +#116801 = EDGE_CURVE('',#116770,#116794,#116802,.T.); +#116802 = LINE('',#116803,#116804); +#116803 = CARTESIAN_POINT('',(0.6,-9.86,8.2)); +#116804 = VECTOR('',#116805,1.); +#116805 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116806 = PLANE('',#116807); +#116807 = AXIS2_PLACEMENT_3D('',#116808,#116809,#116810); +#116808 = CARTESIAN_POINT('',(0.6,-9.71,8.35)); +#116809 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116810 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116811 = ADVANCED_FACE('',(#116812),#116830,.T.); +#116812 = FACE_BOUND('',#116813,.T.); +#116813 = EDGE_LOOP('',(#116814,#116815,#116816,#116824)); +#116814 = ORIENTED_EDGE('',*,*,#116793,.F.); +#116815 = ORIENTED_EDGE('',*,*,#115382,.T.); +#116816 = ORIENTED_EDGE('',*,*,#116817,.T.); +#116817 = EDGE_CURVE('',#115375,#116818,#116820,.T.); +#116818 = VERTEX_POINT('',#116819); +#116819 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#116820 = LINE('',#116821,#116822); +#116821 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#116822 = VECTOR('',#116823,1.); +#116823 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116824 = ORIENTED_EDGE('',*,*,#116825,.F.); +#116825 = EDGE_CURVE('',#116794,#116818,#116826,.T.); +#116826 = LINE('',#116827,#116828); +#116827 = CARTESIAN_POINT('',(-0.3,-9.56,8.2)); +#116828 = VECTOR('',#116829,1.); +#116829 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116830 = PLANE('',#116831); +#116831 = AXIS2_PLACEMENT_3D('',#116832,#116833,#116834); +#116832 = CARTESIAN_POINT('',(-0.45,-9.56,8.35)); +#116833 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116834 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116835 = ADVANCED_FACE('',(#116836),#116847,.T.); +#116836 = FACE_BOUND('',#116837,.T.); +#116837 = EDGE_LOOP('',(#116838,#116839,#116840,#116841)); +#116838 = ORIENTED_EDGE('',*,*,#116817,.F.); +#116839 = ORIENTED_EDGE('',*,*,#115374,.T.); +#116840 = ORIENTED_EDGE('',*,*,#116760,.T.); +#116841 = ORIENTED_EDGE('',*,*,#116842,.F.); +#116842 = EDGE_CURVE('',#116818,#116761,#116843,.T.); +#116843 = LINE('',#116844,#116845); +#116844 = CARTESIAN_POINT('',(-0.6,-10.46,8.2)); +#116845 = VECTOR('',#116846,1.); +#116846 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116847 = PLANE('',#116848); +#116848 = AXIS2_PLACEMENT_3D('',#116849,#116850,#116851); +#116849 = CARTESIAN_POINT('',(-0.6,-10.61,8.35)); +#116850 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116851 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116852 = ADVANCED_FACE('',(#116853),#116878,.T.); +#116853 = FACE_BOUND('',#116854,.T.); +#116854 = EDGE_LOOP('',(#116855,#116863,#116864,#116872)); +#116855 = ORIENTED_EDGE('',*,*,#116856,.F.); +#116856 = EDGE_CURVE('',#115399,#116857,#116859,.T.); +#116857 = VERTEX_POINT('',#116858); +#116858 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#116859 = LINE('',#116860,#116861); +#116860 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#116861 = VECTOR('',#116862,1.); +#116862 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116863 = ORIENTED_EDGE('',*,*,#115398,.T.); +#116864 = ORIENTED_EDGE('',*,*,#116865,.T.); +#116865 = EDGE_CURVE('',#115401,#116866,#116868,.T.); +#116866 = VERTEX_POINT('',#116867); +#116867 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#116868 = LINE('',#116869,#116870); +#116869 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#116870 = VECTOR('',#116871,1.); +#116871 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116872 = ORIENTED_EDGE('',*,*,#116873,.F.); +#116873 = EDGE_CURVE('',#116857,#116866,#116874,.T.); +#116874 = LINE('',#116875,#116876); +#116875 = CARTESIAN_POINT('',(0.3,-8.22,8.2)); +#116876 = VECTOR('',#116877,1.); +#116877 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116878 = PLANE('',#116879); +#116879 = AXIS2_PLACEMENT_3D('',#116880,#116881,#116882); +#116880 = CARTESIAN_POINT('',(0.45,-8.22,8.35)); +#116881 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116882 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116883 = ADVANCED_FACE('',(#116884),#116902,.T.); +#116884 = FACE_BOUND('',#116885,.T.); +#116885 = EDGE_LOOP('',(#116886,#116887,#116888,#116896)); +#116886 = ORIENTED_EDGE('',*,*,#116865,.F.); +#116887 = ORIENTED_EDGE('',*,*,#115424,.T.); +#116888 = ORIENTED_EDGE('',*,*,#116889,.T.); +#116889 = EDGE_CURVE('',#115417,#116890,#116892,.T.); +#116890 = VERTEX_POINT('',#116891); +#116891 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#116892 = LINE('',#116893,#116894); +#116893 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#116894 = VECTOR('',#116895,1.); +#116895 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116896 = ORIENTED_EDGE('',*,*,#116897,.F.); +#116897 = EDGE_CURVE('',#116866,#116890,#116898,.T.); +#116898 = LINE('',#116899,#116900); +#116899 = CARTESIAN_POINT('',(0.6,-7.32,8.2)); +#116900 = VECTOR('',#116901,1.); +#116901 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116902 = PLANE('',#116903); +#116903 = AXIS2_PLACEMENT_3D('',#116904,#116905,#116906); +#116904 = CARTESIAN_POINT('',(0.6,-7.17,8.35)); +#116905 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#116906 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#116907 = ADVANCED_FACE('',(#116908),#116926,.T.); +#116908 = FACE_BOUND('',#116909,.T.); +#116909 = EDGE_LOOP('',(#116910,#116911,#116912,#116920)); +#116910 = ORIENTED_EDGE('',*,*,#116889,.F.); +#116911 = ORIENTED_EDGE('',*,*,#115416,.T.); +#116912 = ORIENTED_EDGE('',*,*,#116913,.T.); +#116913 = EDGE_CURVE('',#115409,#116914,#116916,.T.); +#116914 = VERTEX_POINT('',#116915); +#116915 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#116916 = LINE('',#116917,#116918); +#116917 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#116918 = VECTOR('',#116919,1.); +#116919 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#116920 = ORIENTED_EDGE('',*,*,#116921,.F.); +#116921 = EDGE_CURVE('',#116890,#116914,#116922,.T.); +#116922 = LINE('',#116923,#116924); +#116923 = CARTESIAN_POINT('',(-0.3,-7.02,8.2)); +#116924 = VECTOR('',#116925,1.); +#116925 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#116926 = PLANE('',#116927); +#116927 = AXIS2_PLACEMENT_3D('',#116928,#116929,#116930); +#116928 = CARTESIAN_POINT('',(-0.45,-7.02,8.35)); +#116929 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#116930 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#116931 = ADVANCED_FACE('',(#116932),#116943,.T.); +#116932 = FACE_BOUND('',#116933,.T.); +#116933 = EDGE_LOOP('',(#116934,#116935,#116936,#116937)); +#116934 = ORIENTED_EDGE('',*,*,#116913,.F.); +#116935 = ORIENTED_EDGE('',*,*,#115408,.T.); +#116936 = ORIENTED_EDGE('',*,*,#116856,.T.); +#116937 = ORIENTED_EDGE('',*,*,#116938,.F.); +#116938 = EDGE_CURVE('',#116914,#116857,#116939,.T.); +#116939 = LINE('',#116940,#116941); +#116940 = CARTESIAN_POINT('',(-0.6,-7.92,8.2)); +#116941 = VECTOR('',#116942,1.); +#116942 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#116943 = PLANE('',#116944); +#116944 = AXIS2_PLACEMENT_3D('',#116945,#116946,#116947); +#116945 = CARTESIAN_POINT('',(-0.6,-8.07,8.35)); +#116946 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#116947 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#116948 = ADVANCED_FACE('',(#116949),#116974,.T.); +#116949 = FACE_BOUND('',#116950,.T.); +#116950 = EDGE_LOOP('',(#116951,#116959,#116960,#116968)); +#116951 = ORIENTED_EDGE('',*,*,#116952,.F.); +#116952 = EDGE_CURVE('',#115433,#116953,#116955,.T.); +#116953 = VERTEX_POINT('',#116954); +#116954 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#116955 = LINE('',#116956,#116957); +#116956 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#116957 = VECTOR('',#116958,1.); +#116958 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#116959 = ORIENTED_EDGE('',*,*,#115432,.T.); +#116960 = ORIENTED_EDGE('',*,*,#116961,.T.); +#116961 = EDGE_CURVE('',#115435,#116962,#116964,.T.); +#116962 = VERTEX_POINT('',#116963); +#116963 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#116964 = LINE('',#116965,#116966); +#116965 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#116966 = VECTOR('',#116967,1.); +#116967 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#116968 = ORIENTED_EDGE('',*,*,#116969,.F.); +#116969 = EDGE_CURVE('',#116953,#116962,#116970,.T.); +#116970 = LINE('',#116971,#116972); +#116971 = CARTESIAN_POINT('',(0.3,-5.68,8.2)); +#116972 = VECTOR('',#116973,1.); +#116973 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#116974 = PLANE('',#116975); +#116975 = AXIS2_PLACEMENT_3D('',#116976,#116977,#116978); +#116976 = CARTESIAN_POINT('',(0.45,-5.68,8.35)); +#116977 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#116978 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#116979 = ADVANCED_FACE('',(#116980),#116998,.T.); +#116980 = FACE_BOUND('',#116981,.T.); +#116981 = EDGE_LOOP('',(#116982,#116983,#116984,#116992)); +#116982 = ORIENTED_EDGE('',*,*,#116961,.F.); +#116983 = ORIENTED_EDGE('',*,*,#115458,.T.); +#116984 = ORIENTED_EDGE('',*,*,#116985,.T.); +#116985 = EDGE_CURVE('',#115451,#116986,#116988,.T.); +#116986 = VERTEX_POINT('',#116987); +#116987 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#116988 = LINE('',#116989,#116990); +#116989 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#116990 = VECTOR('',#116991,1.); +#116991 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#116992 = ORIENTED_EDGE('',*,*,#116993,.F.); +#116993 = EDGE_CURVE('',#116962,#116986,#116994,.T.); +#116994 = LINE('',#116995,#116996); +#116995 = CARTESIAN_POINT('',(0.6,-4.78,8.2)); +#116996 = VECTOR('',#116997,1.); +#116997 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#116998 = PLANE('',#116999); +#116999 = AXIS2_PLACEMENT_3D('',#117000,#117001,#117002); +#117000 = CARTESIAN_POINT('',(0.6,-4.63,8.35)); +#117001 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#117002 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#117003 = ADVANCED_FACE('',(#117004),#117022,.T.); +#117004 = FACE_BOUND('',#117005,.T.); +#117005 = EDGE_LOOP('',(#117006,#117007,#117008,#117016)); +#117006 = ORIENTED_EDGE('',*,*,#116985,.F.); +#117007 = ORIENTED_EDGE('',*,*,#115450,.T.); +#117008 = ORIENTED_EDGE('',*,*,#117009,.T.); +#117009 = EDGE_CURVE('',#115443,#117010,#117012,.T.); +#117010 = VERTEX_POINT('',#117011); +#117011 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#117012 = LINE('',#117013,#117014); +#117013 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#117014 = VECTOR('',#117015,1.); +#117015 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#117016 = ORIENTED_EDGE('',*,*,#117017,.F.); +#117017 = EDGE_CURVE('',#116986,#117010,#117018,.T.); +#117018 = LINE('',#117019,#117020); +#117019 = CARTESIAN_POINT('',(-0.3,-4.48,8.2)); +#117020 = VECTOR('',#117021,1.); +#117021 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117022 = PLANE('',#117023); +#117023 = AXIS2_PLACEMENT_3D('',#117024,#117025,#117026); +#117024 = CARTESIAN_POINT('',(-0.45,-4.48,8.35)); +#117025 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#117026 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#117027 = ADVANCED_FACE('',(#117028),#117039,.T.); +#117028 = FACE_BOUND('',#117029,.T.); +#117029 = EDGE_LOOP('',(#117030,#117031,#117032,#117033)); +#117030 = ORIENTED_EDGE('',*,*,#117009,.F.); +#117031 = ORIENTED_EDGE('',*,*,#115442,.T.); +#117032 = ORIENTED_EDGE('',*,*,#116952,.T.); +#117033 = ORIENTED_EDGE('',*,*,#117034,.F.); +#117034 = EDGE_CURVE('',#117010,#116953,#117035,.T.); +#117035 = LINE('',#117036,#117037); +#117036 = CARTESIAN_POINT('',(-0.6,-5.38,8.2)); +#117037 = VECTOR('',#117038,1.); +#117038 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117039 = PLANE('',#117040); +#117040 = AXIS2_PLACEMENT_3D('',#117041,#117042,#117043); +#117041 = CARTESIAN_POINT('',(-0.6,-5.53,8.35)); +#117042 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#117043 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#117044 = ADVANCED_FACE('',(#117045),#117070,.T.); +#117045 = FACE_BOUND('',#117046,.T.); +#117046 = EDGE_LOOP('',(#117047,#117055,#117056,#117064)); +#117047 = ORIENTED_EDGE('',*,*,#117048,.F.); +#117048 = EDGE_CURVE('',#115467,#117049,#117051,.T.); +#117049 = VERTEX_POINT('',#117050); +#117050 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#117051 = LINE('',#117052,#117053); +#117052 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#117053 = VECTOR('',#117054,1.); +#117054 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#117055 = ORIENTED_EDGE('',*,*,#115466,.T.); +#117056 = ORIENTED_EDGE('',*,*,#117057,.T.); +#117057 = EDGE_CURVE('',#115469,#117058,#117060,.T.); +#117058 = VERTEX_POINT('',#117059); +#117059 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#117060 = LINE('',#117061,#117062); +#117061 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#117062 = VECTOR('',#117063,1.); +#117063 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#117064 = ORIENTED_EDGE('',*,*,#117065,.F.); +#117065 = EDGE_CURVE('',#117049,#117058,#117066,.T.); +#117066 = LINE('',#117067,#117068); +#117067 = CARTESIAN_POINT('',(0.3,-3.14,8.2)); +#117068 = VECTOR('',#117069,1.); +#117069 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117070 = PLANE('',#117071); +#117071 = AXIS2_PLACEMENT_3D('',#117072,#117073,#117074); +#117072 = CARTESIAN_POINT('',(0.45,-3.14,8.35)); +#117073 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#117074 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#117075 = ADVANCED_FACE('',(#117076),#117094,.T.); +#117076 = FACE_BOUND('',#117077,.T.); +#117077 = EDGE_LOOP('',(#117078,#117079,#117080,#117088)); +#117078 = ORIENTED_EDGE('',*,*,#117057,.F.); +#117079 = ORIENTED_EDGE('',*,*,#115492,.T.); +#117080 = ORIENTED_EDGE('',*,*,#117081,.T.); +#117081 = EDGE_CURVE('',#115485,#117082,#117084,.T.); +#117082 = VERTEX_POINT('',#117083); +#117083 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#117084 = LINE('',#117085,#117086); +#117085 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#117086 = VECTOR('',#117087,1.); +#117087 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#117088 = ORIENTED_EDGE('',*,*,#117089,.F.); +#117089 = EDGE_CURVE('',#117058,#117082,#117090,.T.); +#117090 = LINE('',#117091,#117092); +#117091 = CARTESIAN_POINT('',(0.6,-2.24,8.2)); +#117092 = VECTOR('',#117093,1.); +#117093 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117094 = PLANE('',#117095); +#117095 = AXIS2_PLACEMENT_3D('',#117096,#117097,#117098); +#117096 = CARTESIAN_POINT('',(0.6,-2.09,8.35)); +#117097 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#117098 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#117099 = ADVANCED_FACE('',(#117100),#117118,.T.); +#117100 = FACE_BOUND('',#117101,.T.); +#117101 = EDGE_LOOP('',(#117102,#117103,#117104,#117112)); +#117102 = ORIENTED_EDGE('',*,*,#117081,.F.); +#117103 = ORIENTED_EDGE('',*,*,#115484,.T.); +#117104 = ORIENTED_EDGE('',*,*,#117105,.T.); +#117105 = EDGE_CURVE('',#115477,#117106,#117108,.T.); +#117106 = VERTEX_POINT('',#117107); +#117107 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#117108 = LINE('',#117109,#117110); +#117109 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#117110 = VECTOR('',#117111,1.); +#117111 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#117112 = ORIENTED_EDGE('',*,*,#117113,.F.); +#117113 = EDGE_CURVE('',#117082,#117106,#117114,.T.); +#117114 = LINE('',#117115,#117116); +#117115 = CARTESIAN_POINT('',(-0.3,-1.94,8.2)); +#117116 = VECTOR('',#117117,1.); +#117117 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117118 = PLANE('',#117119); +#117119 = AXIS2_PLACEMENT_3D('',#117120,#117121,#117122); +#117120 = CARTESIAN_POINT('',(-0.45,-1.94,8.35)); +#117121 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#117122 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#117123 = ADVANCED_FACE('',(#117124),#117135,.T.); +#117124 = FACE_BOUND('',#117125,.T.); +#117125 = EDGE_LOOP('',(#117126,#117127,#117128,#117129)); +#117126 = ORIENTED_EDGE('',*,*,#117105,.F.); +#117127 = ORIENTED_EDGE('',*,*,#115476,.T.); +#117128 = ORIENTED_EDGE('',*,*,#117048,.T.); +#117129 = ORIENTED_EDGE('',*,*,#117130,.F.); +#117130 = EDGE_CURVE('',#117106,#117049,#117131,.T.); +#117131 = LINE('',#117132,#117133); +#117132 = CARTESIAN_POINT('',(-0.6,-2.84,8.2)); +#117133 = VECTOR('',#117134,1.); +#117134 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117135 = PLANE('',#117136); +#117136 = AXIS2_PLACEMENT_3D('',#117137,#117138,#117139); +#117137 = CARTESIAN_POINT('',(-0.6,-2.99,8.35)); +#117138 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#117139 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#117140 = ADVANCED_FACE('',(#117141),#117166,.T.); +#117141 = FACE_BOUND('',#117142,.T.); +#117142 = EDGE_LOOP('',(#117143,#117151,#117152,#117160)); +#117143 = ORIENTED_EDGE('',*,*,#117144,.F.); +#117144 = EDGE_CURVE('',#115501,#117145,#117147,.T.); +#117145 = VERTEX_POINT('',#117146); +#117146 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#117147 = LINE('',#117148,#117149); +#117148 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#117149 = VECTOR('',#117150,1.); +#117150 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#117151 = ORIENTED_EDGE('',*,*,#115500,.T.); +#117152 = ORIENTED_EDGE('',*,*,#117153,.T.); +#117153 = EDGE_CURVE('',#115503,#117154,#117156,.T.); +#117154 = VERTEX_POINT('',#117155); +#117155 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#117156 = LINE('',#117157,#117158); +#117157 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#117158 = VECTOR('',#117159,1.); +#117159 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#117160 = ORIENTED_EDGE('',*,*,#117161,.F.); +#117161 = EDGE_CURVE('',#117145,#117154,#117162,.T.); +#117162 = LINE('',#117163,#117164); +#117163 = CARTESIAN_POINT('',(0.3,-0.6,8.2)); +#117164 = VECTOR('',#117165,1.); +#117165 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117166 = PLANE('',#117167); +#117167 = AXIS2_PLACEMENT_3D('',#117168,#117169,#117170); +#117168 = CARTESIAN_POINT('',(0.45,-0.6,8.35)); +#117169 = DIRECTION('',(-0.707106781187,7.850462293414E-17, + 0.707106781187)); +#117170 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#117171 = ADVANCED_FACE('',(#117172),#117190,.T.); +#117172 = FACE_BOUND('',#117173,.T.); +#117173 = EDGE_LOOP('',(#117174,#117175,#117176,#117184)); +#117174 = ORIENTED_EDGE('',*,*,#117153,.F.); +#117175 = ORIENTED_EDGE('',*,*,#115526,.T.); +#117176 = ORIENTED_EDGE('',*,*,#117177,.T.); +#117177 = EDGE_CURVE('',#115519,#117178,#117180,.T.); +#117178 = VERTEX_POINT('',#117179); +#117179 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#117180 = LINE('',#117181,#117182); +#117181 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#117182 = VECTOR('',#117183,1.); +#117183 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#117184 = ORIENTED_EDGE('',*,*,#117185,.F.); +#117185 = EDGE_CURVE('',#117154,#117178,#117186,.T.); +#117186 = LINE('',#117187,#117188); +#117187 = CARTESIAN_POINT('',(0.6,0.3,8.2)); +#117188 = VECTOR('',#117189,1.); +#117189 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117190 = PLANE('',#117191); +#117191 = AXIS2_PLACEMENT_3D('',#117192,#117193,#117194); +#117192 = CARTESIAN_POINT('',(0.6,0.45,8.35)); +#117193 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#117194 = DIRECTION('',(-1.,1.110223024625E-16,2.680187753847E-29)); +#117195 = ADVANCED_FACE('',(#117196),#117214,.T.); +#117196 = FACE_BOUND('',#117197,.T.); +#117197 = EDGE_LOOP('',(#117198,#117199,#117200,#117208)); +#117198 = ORIENTED_EDGE('',*,*,#117177,.F.); +#117199 = ORIENTED_EDGE('',*,*,#115518,.T.); +#117200 = ORIENTED_EDGE('',*,*,#117201,.T.); +#117201 = EDGE_CURVE('',#115511,#117202,#117204,.T.); +#117202 = VERTEX_POINT('',#117203); +#117203 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#117204 = LINE('',#117205,#117206); +#117205 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#117206 = VECTOR('',#117207,1.); +#117207 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#117208 = ORIENTED_EDGE('',*,*,#117209,.F.); +#117209 = EDGE_CURVE('',#117178,#117202,#117210,.T.); +#117210 = LINE('',#117211,#117212); +#117211 = CARTESIAN_POINT('',(-0.3,0.6,8.2)); +#117212 = VECTOR('',#117213,1.); +#117213 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117214 = PLANE('',#117215); +#117215 = AXIS2_PLACEMENT_3D('',#117216,#117217,#117218); +#117216 = CARTESIAN_POINT('',(-0.45,0.6,8.35)); +#117217 = DIRECTION('',(0.707106781187,-7.850462293414E-17, + 0.707106781187)); +#117218 = DIRECTION('',(-1.110223024625E-16,-1.,2.68018785873E-29)); +#117219 = ADVANCED_FACE('',(#117220),#117231,.T.); +#117220 = FACE_BOUND('',#117221,.T.); +#117221 = EDGE_LOOP('',(#117222,#117223,#117224,#117225)); +#117222 = ORIENTED_EDGE('',*,*,#117201,.F.); +#117223 = ORIENTED_EDGE('',*,*,#115510,.T.); +#117224 = ORIENTED_EDGE('',*,*,#117144,.T.); +#117225 = ORIENTED_EDGE('',*,*,#117226,.F.); +#117226 = EDGE_CURVE('',#117202,#117145,#117227,.T.); +#117227 = LINE('',#117228,#117229); +#117228 = CARTESIAN_POINT('',(-0.6,-0.3,8.2)); +#117229 = VECTOR('',#117230,1.); +#117230 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117231 = PLANE('',#117232); +#117232 = AXIS2_PLACEMENT_3D('',#117233,#117234,#117235); +#117233 = CARTESIAN_POINT('',(-0.6,-0.45,8.35)); +#117234 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#117235 = DIRECTION('',(1.,-1.110223024625E-16,2.680187753847E-29)); +#117236 = ADVANCED_FACE('',(#117237),#117248,.T.); +#117237 = FACE_BOUND('',#117238,.T.); +#117238 = EDGE_LOOP('',(#117239,#117240,#117241,#117247)); +#117239 = ORIENTED_EDGE('',*,*,#115590,.F.); +#117240 = ORIENTED_EDGE('',*,*,#115600,.T.); +#117241 = ORIENTED_EDGE('',*,*,#117242,.T.); +#117242 = EDGE_CURVE('',#115601,#115641,#117243,.T.); +#117243 = LINE('',#117244,#117245); +#117244 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#117245 = VECTOR('',#117246,1.); +#117246 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117247 = ORIENTED_EDGE('',*,*,#115648,.T.); +#117248 = PLANE('',#117249); +#117249 = AXIS2_PLACEMENT_3D('',#117250,#117251,#117252); +#117250 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#117251 = DIRECTION('',(0.,-0.,-1.)); +#117252 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117253 = ADVANCED_FACE('',(#117254),#117295,.F.); +#117254 = FACE_BOUND('',#117255,.F.); +#117255 = EDGE_LOOP('',(#117256,#117264,#117265,#117273,#117281,#117289) + ); +#117256 = ORIENTED_EDGE('',*,*,#117257,.T.); +#117257 = EDGE_CURVE('',#117258,#115641,#117260,.T.); +#117258 = VERTEX_POINT('',#117259); +#117259 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#117260 = LINE('',#117261,#117262); +#117261 = CARTESIAN_POINT('',(0.1,-23.16,-2.5)); +#117262 = VECTOR('',#117263,1.); +#117263 = DIRECTION('',(0.,0.,1.)); +#117264 = ORIENTED_EDGE('',*,*,#115640,.F.); +#117265 = ORIENTED_EDGE('',*,*,#117266,.T.); +#117266 = EDGE_CURVE('',#115633,#117267,#117269,.T.); +#117267 = VERTEX_POINT('',#117268); +#117268 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#117269 = LINE('',#117270,#117271); +#117270 = CARTESIAN_POINT('',(0.1,-22.56,0.2)); +#117271 = VECTOR('',#117272,1.); +#117272 = DIRECTION('',(0.,0.,-1.)); +#117273 = ORIENTED_EDGE('',*,*,#117274,.T.); +#117274 = EDGE_CURVE('',#117267,#117275,#117277,.T.); +#117275 = VERTEX_POINT('',#117276); +#117276 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#117277 = LINE('',#117278,#117279); +#117278 = CARTESIAN_POINT('',(0.1,-22.56,-2.5)); +#117279 = VECTOR('',#117280,1.); +#117280 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117281 = ORIENTED_EDGE('',*,*,#117282,.T.); +#117282 = EDGE_CURVE('',#117275,#117283,#117285,.T.); +#117283 = VERTEX_POINT('',#117284); +#117284 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#117285 = LINE('',#117286,#117287); +#117286 = CARTESIAN_POINT('',(0.1,-22.71,-3.1)); +#117287 = VECTOR('',#117288,1.); +#117288 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117289 = ORIENTED_EDGE('',*,*,#117290,.T.); +#117290 = EDGE_CURVE('',#117283,#117258,#117291,.T.); +#117291 = LINE('',#117292,#117293); +#117292 = CARTESIAN_POINT('',(0.1,-23.01,-3.1)); +#117293 = VECTOR('',#117294,1.); +#117294 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117295 = PLANE('',#117296); +#117296 = AXIS2_PLACEMENT_3D('',#117297,#117298,#117299); +#117297 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#117298 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117299 = DIRECTION('',(0.,0.,1.)); +#117300 = ADVANCED_FACE('',(#117301),#117312,.T.); +#117301 = FACE_BOUND('',#117302,.T.); +#117302 = EDGE_LOOP('',(#117303,#117309,#117310,#117311)); +#117303 = ORIENTED_EDGE('',*,*,#117304,.F.); +#117304 = EDGE_CURVE('',#115609,#115633,#117305,.T.); +#117305 = LINE('',#117306,#117307); +#117306 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#117307 = VECTOR('',#117308,1.); +#117308 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117309 = ORIENTED_EDGE('',*,*,#115616,.T.); +#117310 = ORIENTED_EDGE('',*,*,#115624,.T.); +#117311 = ORIENTED_EDGE('',*,*,#115632,.T.); +#117312 = PLANE('',#117313); +#117313 = AXIS2_PLACEMENT_3D('',#117314,#117315,#117316); +#117314 = CARTESIAN_POINT('',(-0.1,-23.16,0.2)); +#117315 = DIRECTION('',(0.,-0.,-1.)); +#117316 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117317 = ADVANCED_FACE('',(#117318),#117359,.T.); +#117318 = FACE_BOUND('',#117319,.T.); +#117319 = EDGE_LOOP('',(#117320,#117328,#117329,#117337,#117345,#117353) + ); +#117320 = ORIENTED_EDGE('',*,*,#117321,.T.); +#117321 = EDGE_CURVE('',#117322,#115601,#117324,.T.); +#117322 = VERTEX_POINT('',#117323); +#117323 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#117324 = LINE('',#117325,#117326); +#117325 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#117326 = VECTOR('',#117327,1.); +#117327 = DIRECTION('',(0.,0.,1.)); +#117328 = ORIENTED_EDGE('',*,*,#115608,.F.); +#117329 = ORIENTED_EDGE('',*,*,#117330,.T.); +#117330 = EDGE_CURVE('',#115609,#117331,#117333,.T.); +#117331 = VERTEX_POINT('',#117332); +#117332 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#117333 = LINE('',#117334,#117335); +#117334 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#117335 = VECTOR('',#117336,1.); +#117336 = DIRECTION('',(0.,0.,-1.)); +#117337 = ORIENTED_EDGE('',*,*,#117338,.T.); +#117338 = EDGE_CURVE('',#117331,#117339,#117341,.T.); +#117339 = VERTEX_POINT('',#117340); +#117340 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#117341 = LINE('',#117342,#117343); +#117342 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#117343 = VECTOR('',#117344,1.); +#117344 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117345 = ORIENTED_EDGE('',*,*,#117346,.F.); +#117346 = EDGE_CURVE('',#117347,#117339,#117349,.T.); +#117347 = VERTEX_POINT('',#117348); +#117348 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#117349 = LINE('',#117350,#117351); +#117350 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#117351 = VECTOR('',#117352,1.); +#117352 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117353 = ORIENTED_EDGE('',*,*,#117354,.T.); +#117354 = EDGE_CURVE('',#117347,#117322,#117355,.T.); +#117355 = LINE('',#117356,#117357); +#117356 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#117357 = VECTOR('',#117358,1.); +#117358 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117359 = PLANE('',#117360); +#117360 = AXIS2_PLACEMENT_3D('',#117361,#117362,#117363); +#117361 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#117362 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117363 = DIRECTION('',(0.,0.,1.)); +#117364 = ADVANCED_FACE('',(#117365),#117376,.T.); +#117365 = FACE_BOUND('',#117366,.T.); +#117366 = EDGE_LOOP('',(#117367,#117368,#117369,#117375)); +#117367 = ORIENTED_EDGE('',*,*,#115656,.F.); +#117368 = ORIENTED_EDGE('',*,*,#115666,.T.); +#117369 = ORIENTED_EDGE('',*,*,#117370,.T.); +#117370 = EDGE_CURVE('',#115667,#115707,#117371,.T.); +#117371 = LINE('',#117372,#117373); +#117372 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#117373 = VECTOR('',#117374,1.); +#117374 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117375 = ORIENTED_EDGE('',*,*,#115714,.T.); +#117376 = PLANE('',#117377); +#117377 = AXIS2_PLACEMENT_3D('',#117378,#117379,#117380); +#117378 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#117379 = DIRECTION('',(0.,-0.,-1.)); +#117380 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117381 = ADVANCED_FACE('',(#117382),#117423,.F.); +#117382 = FACE_BOUND('',#117383,.F.); +#117383 = EDGE_LOOP('',(#117384,#117392,#117393,#117401,#117409,#117417) + ); +#117384 = ORIENTED_EDGE('',*,*,#117385,.T.); +#117385 = EDGE_CURVE('',#117386,#115707,#117388,.T.); +#117386 = VERTEX_POINT('',#117387); +#117387 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#117388 = LINE('',#117389,#117390); +#117389 = CARTESIAN_POINT('',(0.1,-20.62,-2.5)); +#117390 = VECTOR('',#117391,1.); +#117391 = DIRECTION('',(0.,0.,1.)); +#117392 = ORIENTED_EDGE('',*,*,#115706,.F.); +#117393 = ORIENTED_EDGE('',*,*,#117394,.T.); +#117394 = EDGE_CURVE('',#115699,#117395,#117397,.T.); +#117395 = VERTEX_POINT('',#117396); +#117396 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#117397 = LINE('',#117398,#117399); +#117398 = CARTESIAN_POINT('',(0.1,-20.02,0.2)); +#117399 = VECTOR('',#117400,1.); +#117400 = DIRECTION('',(0.,0.,-1.)); +#117401 = ORIENTED_EDGE('',*,*,#117402,.T.); +#117402 = EDGE_CURVE('',#117395,#117403,#117405,.T.); +#117403 = VERTEX_POINT('',#117404); +#117404 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#117405 = LINE('',#117406,#117407); +#117406 = CARTESIAN_POINT('',(0.1,-20.02,-2.5)); +#117407 = VECTOR('',#117408,1.); +#117408 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117409 = ORIENTED_EDGE('',*,*,#117410,.T.); +#117410 = EDGE_CURVE('',#117403,#117411,#117413,.T.); +#117411 = VERTEX_POINT('',#117412); +#117412 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#117413 = LINE('',#117414,#117415); +#117414 = CARTESIAN_POINT('',(0.1,-20.17,-3.1)); +#117415 = VECTOR('',#117416,1.); +#117416 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117417 = ORIENTED_EDGE('',*,*,#117418,.T.); +#117418 = EDGE_CURVE('',#117411,#117386,#117419,.T.); +#117419 = LINE('',#117420,#117421); +#117420 = CARTESIAN_POINT('',(0.1,-20.47,-3.1)); +#117421 = VECTOR('',#117422,1.); +#117422 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117423 = PLANE('',#117424); +#117424 = AXIS2_PLACEMENT_3D('',#117425,#117426,#117427); +#117425 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#117426 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117427 = DIRECTION('',(0.,0.,1.)); +#117428 = ADVANCED_FACE('',(#117429),#117440,.T.); +#117429 = FACE_BOUND('',#117430,.T.); +#117430 = EDGE_LOOP('',(#117431,#117437,#117438,#117439)); +#117431 = ORIENTED_EDGE('',*,*,#117432,.F.); +#117432 = EDGE_CURVE('',#115675,#115699,#117433,.T.); +#117433 = LINE('',#117434,#117435); +#117434 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#117435 = VECTOR('',#117436,1.); +#117436 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117437 = ORIENTED_EDGE('',*,*,#115682,.T.); +#117438 = ORIENTED_EDGE('',*,*,#115690,.T.); +#117439 = ORIENTED_EDGE('',*,*,#115698,.T.); +#117440 = PLANE('',#117441); +#117441 = AXIS2_PLACEMENT_3D('',#117442,#117443,#117444); +#117442 = CARTESIAN_POINT('',(-0.1,-20.62,0.2)); +#117443 = DIRECTION('',(0.,-0.,-1.)); +#117444 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117445 = ADVANCED_FACE('',(#117446),#117487,.T.); +#117446 = FACE_BOUND('',#117447,.T.); +#117447 = EDGE_LOOP('',(#117448,#117456,#117457,#117465,#117473,#117481) + ); +#117448 = ORIENTED_EDGE('',*,*,#117449,.T.); +#117449 = EDGE_CURVE('',#117450,#115667,#117452,.T.); +#117450 = VERTEX_POINT('',#117451); +#117451 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#117452 = LINE('',#117453,#117454); +#117453 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#117454 = VECTOR('',#117455,1.); +#117455 = DIRECTION('',(0.,0.,1.)); +#117456 = ORIENTED_EDGE('',*,*,#115674,.F.); +#117457 = ORIENTED_EDGE('',*,*,#117458,.T.); +#117458 = EDGE_CURVE('',#115675,#117459,#117461,.T.); +#117459 = VERTEX_POINT('',#117460); +#117460 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#117461 = LINE('',#117462,#117463); +#117462 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#117463 = VECTOR('',#117464,1.); +#117464 = DIRECTION('',(0.,0.,-1.)); +#117465 = ORIENTED_EDGE('',*,*,#117466,.T.); +#117466 = EDGE_CURVE('',#117459,#117467,#117469,.T.); +#117467 = VERTEX_POINT('',#117468); +#117468 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#117469 = LINE('',#117470,#117471); +#117470 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#117471 = VECTOR('',#117472,1.); +#117472 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117473 = ORIENTED_EDGE('',*,*,#117474,.F.); +#117474 = EDGE_CURVE('',#117475,#117467,#117477,.T.); +#117475 = VERTEX_POINT('',#117476); +#117476 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#117477 = LINE('',#117478,#117479); +#117478 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#117479 = VECTOR('',#117480,1.); +#117480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117481 = ORIENTED_EDGE('',*,*,#117482,.T.); +#117482 = EDGE_CURVE('',#117475,#117450,#117483,.T.); +#117483 = LINE('',#117484,#117485); +#117484 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#117485 = VECTOR('',#117486,1.); +#117486 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117487 = PLANE('',#117488); +#117488 = AXIS2_PLACEMENT_3D('',#117489,#117490,#117491); +#117489 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#117490 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117491 = DIRECTION('',(0.,0.,1.)); +#117492 = ADVANCED_FACE('',(#117493),#117504,.T.); +#117493 = FACE_BOUND('',#117494,.T.); +#117494 = EDGE_LOOP('',(#117495,#117496,#117497,#117503)); +#117495 = ORIENTED_EDGE('',*,*,#115722,.F.); +#117496 = ORIENTED_EDGE('',*,*,#115732,.T.); +#117497 = ORIENTED_EDGE('',*,*,#117498,.T.); +#117498 = EDGE_CURVE('',#115733,#115773,#117499,.T.); +#117499 = LINE('',#117500,#117501); +#117500 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#117501 = VECTOR('',#117502,1.); +#117502 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117503 = ORIENTED_EDGE('',*,*,#115780,.T.); +#117504 = PLANE('',#117505); +#117505 = AXIS2_PLACEMENT_3D('',#117506,#117507,#117508); +#117506 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#117507 = DIRECTION('',(0.,-0.,-1.)); +#117508 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117509 = ADVANCED_FACE('',(#117510),#117551,.F.); +#117510 = FACE_BOUND('',#117511,.F.); +#117511 = EDGE_LOOP('',(#117512,#117520,#117521,#117529,#117537,#117545) + ); +#117512 = ORIENTED_EDGE('',*,*,#117513,.T.); +#117513 = EDGE_CURVE('',#117514,#115773,#117516,.T.); +#117514 = VERTEX_POINT('',#117515); +#117515 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#117516 = LINE('',#117517,#117518); +#117517 = CARTESIAN_POINT('',(0.1,-18.08,-2.5)); +#117518 = VECTOR('',#117519,1.); +#117519 = DIRECTION('',(0.,0.,1.)); +#117520 = ORIENTED_EDGE('',*,*,#115772,.F.); +#117521 = ORIENTED_EDGE('',*,*,#117522,.T.); +#117522 = EDGE_CURVE('',#115765,#117523,#117525,.T.); +#117523 = VERTEX_POINT('',#117524); +#117524 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#117525 = LINE('',#117526,#117527); +#117526 = CARTESIAN_POINT('',(0.1,-17.48,0.2)); +#117527 = VECTOR('',#117528,1.); +#117528 = DIRECTION('',(0.,0.,-1.)); +#117529 = ORIENTED_EDGE('',*,*,#117530,.T.); +#117530 = EDGE_CURVE('',#117523,#117531,#117533,.T.); +#117531 = VERTEX_POINT('',#117532); +#117532 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#117533 = LINE('',#117534,#117535); +#117534 = CARTESIAN_POINT('',(0.1,-17.48,-2.5)); +#117535 = VECTOR('',#117536,1.); +#117536 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117537 = ORIENTED_EDGE('',*,*,#117538,.T.); +#117538 = EDGE_CURVE('',#117531,#117539,#117541,.T.); +#117539 = VERTEX_POINT('',#117540); +#117540 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#117541 = LINE('',#117542,#117543); +#117542 = CARTESIAN_POINT('',(0.1,-17.63,-3.1)); +#117543 = VECTOR('',#117544,1.); +#117544 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117545 = ORIENTED_EDGE('',*,*,#117546,.T.); +#117546 = EDGE_CURVE('',#117539,#117514,#117547,.T.); +#117547 = LINE('',#117548,#117549); +#117548 = CARTESIAN_POINT('',(0.1,-17.93,-3.1)); +#117549 = VECTOR('',#117550,1.); +#117550 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117551 = PLANE('',#117552); +#117552 = AXIS2_PLACEMENT_3D('',#117553,#117554,#117555); +#117553 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#117554 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117555 = DIRECTION('',(0.,0.,1.)); +#117556 = ADVANCED_FACE('',(#117557),#117568,.T.); +#117557 = FACE_BOUND('',#117558,.T.); +#117558 = EDGE_LOOP('',(#117559,#117565,#117566,#117567)); +#117559 = ORIENTED_EDGE('',*,*,#117560,.F.); +#117560 = EDGE_CURVE('',#115741,#115765,#117561,.T.); +#117561 = LINE('',#117562,#117563); +#117562 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#117563 = VECTOR('',#117564,1.); +#117564 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117565 = ORIENTED_EDGE('',*,*,#115748,.T.); +#117566 = ORIENTED_EDGE('',*,*,#115756,.T.); +#117567 = ORIENTED_EDGE('',*,*,#115764,.T.); +#117568 = PLANE('',#117569); +#117569 = AXIS2_PLACEMENT_3D('',#117570,#117571,#117572); +#117570 = CARTESIAN_POINT('',(-0.1,-18.08,0.2)); +#117571 = DIRECTION('',(0.,-0.,-1.)); +#117572 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117573 = ADVANCED_FACE('',(#117574),#117615,.T.); +#117574 = FACE_BOUND('',#117575,.T.); +#117575 = EDGE_LOOP('',(#117576,#117584,#117585,#117593,#117601,#117609) + ); +#117576 = ORIENTED_EDGE('',*,*,#117577,.T.); +#117577 = EDGE_CURVE('',#117578,#115733,#117580,.T.); +#117578 = VERTEX_POINT('',#117579); +#117579 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#117580 = LINE('',#117581,#117582); +#117581 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#117582 = VECTOR('',#117583,1.); +#117583 = DIRECTION('',(0.,0.,1.)); +#117584 = ORIENTED_EDGE('',*,*,#115740,.F.); +#117585 = ORIENTED_EDGE('',*,*,#117586,.T.); +#117586 = EDGE_CURVE('',#115741,#117587,#117589,.T.); +#117587 = VERTEX_POINT('',#117588); +#117588 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#117589 = LINE('',#117590,#117591); +#117590 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#117591 = VECTOR('',#117592,1.); +#117592 = DIRECTION('',(0.,0.,-1.)); +#117593 = ORIENTED_EDGE('',*,*,#117594,.T.); +#117594 = EDGE_CURVE('',#117587,#117595,#117597,.T.); +#117595 = VERTEX_POINT('',#117596); +#117596 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#117597 = LINE('',#117598,#117599); +#117598 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#117599 = VECTOR('',#117600,1.); +#117600 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117601 = ORIENTED_EDGE('',*,*,#117602,.F.); +#117602 = EDGE_CURVE('',#117603,#117595,#117605,.T.); +#117603 = VERTEX_POINT('',#117604); +#117604 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#117605 = LINE('',#117606,#117607); +#117606 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#117607 = VECTOR('',#117608,1.); +#117608 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117609 = ORIENTED_EDGE('',*,*,#117610,.T.); +#117610 = EDGE_CURVE('',#117603,#117578,#117611,.T.); +#117611 = LINE('',#117612,#117613); +#117612 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#117613 = VECTOR('',#117614,1.); +#117614 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117615 = PLANE('',#117616); +#117616 = AXIS2_PLACEMENT_3D('',#117617,#117618,#117619); +#117617 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#117618 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117619 = DIRECTION('',(0.,0.,1.)); +#117620 = ADVANCED_FACE('',(#117621),#117632,.T.); +#117621 = FACE_BOUND('',#117622,.T.); +#117622 = EDGE_LOOP('',(#117623,#117624,#117625,#117631)); +#117623 = ORIENTED_EDGE('',*,*,#115788,.F.); +#117624 = ORIENTED_EDGE('',*,*,#115798,.T.); +#117625 = ORIENTED_EDGE('',*,*,#117626,.T.); +#117626 = EDGE_CURVE('',#115799,#115839,#117627,.T.); +#117627 = LINE('',#117628,#117629); +#117628 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#117629 = VECTOR('',#117630,1.); +#117630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117631 = ORIENTED_EDGE('',*,*,#115846,.T.); +#117632 = PLANE('',#117633); +#117633 = AXIS2_PLACEMENT_3D('',#117634,#117635,#117636); +#117634 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#117635 = DIRECTION('',(0.,-0.,-1.)); +#117636 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117637 = ADVANCED_FACE('',(#117638),#117679,.F.); +#117638 = FACE_BOUND('',#117639,.F.); +#117639 = EDGE_LOOP('',(#117640,#117648,#117649,#117657,#117665,#117673) + ); +#117640 = ORIENTED_EDGE('',*,*,#117641,.T.); +#117641 = EDGE_CURVE('',#117642,#115839,#117644,.T.); +#117642 = VERTEX_POINT('',#117643); +#117643 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#117644 = LINE('',#117645,#117646); +#117645 = CARTESIAN_POINT('',(0.1,-15.54,-2.5)); +#117646 = VECTOR('',#117647,1.); +#117647 = DIRECTION('',(0.,0.,1.)); +#117648 = ORIENTED_EDGE('',*,*,#115838,.F.); +#117649 = ORIENTED_EDGE('',*,*,#117650,.T.); +#117650 = EDGE_CURVE('',#115831,#117651,#117653,.T.); +#117651 = VERTEX_POINT('',#117652); +#117652 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#117653 = LINE('',#117654,#117655); +#117654 = CARTESIAN_POINT('',(0.1,-14.94,0.2)); +#117655 = VECTOR('',#117656,1.); +#117656 = DIRECTION('',(0.,0.,-1.)); +#117657 = ORIENTED_EDGE('',*,*,#117658,.T.); +#117658 = EDGE_CURVE('',#117651,#117659,#117661,.T.); +#117659 = VERTEX_POINT('',#117660); +#117660 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#117661 = LINE('',#117662,#117663); +#117662 = CARTESIAN_POINT('',(0.1,-14.94,-2.5)); +#117663 = VECTOR('',#117664,1.); +#117664 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117665 = ORIENTED_EDGE('',*,*,#117666,.T.); +#117666 = EDGE_CURVE('',#117659,#117667,#117669,.T.); +#117667 = VERTEX_POINT('',#117668); +#117668 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#117669 = LINE('',#117670,#117671); +#117670 = CARTESIAN_POINT('',(0.1,-15.09,-3.1)); +#117671 = VECTOR('',#117672,1.); +#117672 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117673 = ORIENTED_EDGE('',*,*,#117674,.T.); +#117674 = EDGE_CURVE('',#117667,#117642,#117675,.T.); +#117675 = LINE('',#117676,#117677); +#117676 = CARTESIAN_POINT('',(0.1,-15.39,-3.1)); +#117677 = VECTOR('',#117678,1.); +#117678 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117679 = PLANE('',#117680); +#117680 = AXIS2_PLACEMENT_3D('',#117681,#117682,#117683); +#117681 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#117682 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117683 = DIRECTION('',(0.,0.,1.)); +#117684 = ADVANCED_FACE('',(#117685),#117696,.T.); +#117685 = FACE_BOUND('',#117686,.T.); +#117686 = EDGE_LOOP('',(#117687,#117693,#117694,#117695)); +#117687 = ORIENTED_EDGE('',*,*,#117688,.F.); +#117688 = EDGE_CURVE('',#115807,#115831,#117689,.T.); +#117689 = LINE('',#117690,#117691); +#117690 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#117691 = VECTOR('',#117692,1.); +#117692 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117693 = ORIENTED_EDGE('',*,*,#115814,.T.); +#117694 = ORIENTED_EDGE('',*,*,#115822,.T.); +#117695 = ORIENTED_EDGE('',*,*,#115830,.T.); +#117696 = PLANE('',#117697); +#117697 = AXIS2_PLACEMENT_3D('',#117698,#117699,#117700); +#117698 = CARTESIAN_POINT('',(-0.1,-15.54,0.2)); +#117699 = DIRECTION('',(0.,-0.,-1.)); +#117700 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117701 = ADVANCED_FACE('',(#117702),#117743,.T.); +#117702 = FACE_BOUND('',#117703,.T.); +#117703 = EDGE_LOOP('',(#117704,#117712,#117713,#117721,#117729,#117737) + ); +#117704 = ORIENTED_EDGE('',*,*,#117705,.T.); +#117705 = EDGE_CURVE('',#117706,#115799,#117708,.T.); +#117706 = VERTEX_POINT('',#117707); +#117707 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#117708 = LINE('',#117709,#117710); +#117709 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#117710 = VECTOR('',#117711,1.); +#117711 = DIRECTION('',(0.,0.,1.)); +#117712 = ORIENTED_EDGE('',*,*,#115806,.F.); +#117713 = ORIENTED_EDGE('',*,*,#117714,.T.); +#117714 = EDGE_CURVE('',#115807,#117715,#117717,.T.); +#117715 = VERTEX_POINT('',#117716); +#117716 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#117717 = LINE('',#117718,#117719); +#117718 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#117719 = VECTOR('',#117720,1.); +#117720 = DIRECTION('',(0.,0.,-1.)); +#117721 = ORIENTED_EDGE('',*,*,#117722,.T.); +#117722 = EDGE_CURVE('',#117715,#117723,#117725,.T.); +#117723 = VERTEX_POINT('',#117724); +#117724 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#117725 = LINE('',#117726,#117727); +#117726 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#117727 = VECTOR('',#117728,1.); +#117728 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117729 = ORIENTED_EDGE('',*,*,#117730,.F.); +#117730 = EDGE_CURVE('',#117731,#117723,#117733,.T.); +#117731 = VERTEX_POINT('',#117732); +#117732 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#117733 = LINE('',#117734,#117735); +#117734 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#117735 = VECTOR('',#117736,1.); +#117736 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117737 = ORIENTED_EDGE('',*,*,#117738,.T.); +#117738 = EDGE_CURVE('',#117731,#117706,#117739,.T.); +#117739 = LINE('',#117740,#117741); +#117740 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#117741 = VECTOR('',#117742,1.); +#117742 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117743 = PLANE('',#117744); +#117744 = AXIS2_PLACEMENT_3D('',#117745,#117746,#117747); +#117745 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#117746 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117747 = DIRECTION('',(0.,0.,1.)); +#117748 = ADVANCED_FACE('',(#117749),#117760,.T.); +#117749 = FACE_BOUND('',#117750,.T.); +#117750 = EDGE_LOOP('',(#117751,#117752,#117753,#117759)); +#117751 = ORIENTED_EDGE('',*,*,#115854,.F.); +#117752 = ORIENTED_EDGE('',*,*,#115864,.T.); +#117753 = ORIENTED_EDGE('',*,*,#117754,.T.); +#117754 = EDGE_CURVE('',#115865,#115905,#117755,.T.); +#117755 = LINE('',#117756,#117757); +#117756 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#117757 = VECTOR('',#117758,1.); +#117758 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117759 = ORIENTED_EDGE('',*,*,#115912,.T.); +#117760 = PLANE('',#117761); +#117761 = AXIS2_PLACEMENT_3D('',#117762,#117763,#117764); +#117762 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#117763 = DIRECTION('',(0.,-0.,-1.)); +#117764 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117765 = ADVANCED_FACE('',(#117766),#117807,.F.); +#117766 = FACE_BOUND('',#117767,.F.); +#117767 = EDGE_LOOP('',(#117768,#117776,#117777,#117785,#117793,#117801) + ); +#117768 = ORIENTED_EDGE('',*,*,#117769,.T.); +#117769 = EDGE_CURVE('',#117770,#115905,#117772,.T.); +#117770 = VERTEX_POINT('',#117771); +#117771 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#117772 = LINE('',#117773,#117774); +#117773 = CARTESIAN_POINT('',(0.1,-13.,-2.5)); +#117774 = VECTOR('',#117775,1.); +#117775 = DIRECTION('',(0.,0.,1.)); +#117776 = ORIENTED_EDGE('',*,*,#115904,.F.); +#117777 = ORIENTED_EDGE('',*,*,#117778,.T.); +#117778 = EDGE_CURVE('',#115897,#117779,#117781,.T.); +#117779 = VERTEX_POINT('',#117780); +#117780 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#117781 = LINE('',#117782,#117783); +#117782 = CARTESIAN_POINT('',(0.1,-12.4,0.2)); +#117783 = VECTOR('',#117784,1.); +#117784 = DIRECTION('',(0.,0.,-1.)); +#117785 = ORIENTED_EDGE('',*,*,#117786,.T.); +#117786 = EDGE_CURVE('',#117779,#117787,#117789,.T.); +#117787 = VERTEX_POINT('',#117788); +#117788 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#117789 = LINE('',#117790,#117791); +#117790 = CARTESIAN_POINT('',(0.1,-12.4,-2.5)); +#117791 = VECTOR('',#117792,1.); +#117792 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117793 = ORIENTED_EDGE('',*,*,#117794,.T.); +#117794 = EDGE_CURVE('',#117787,#117795,#117797,.T.); +#117795 = VERTEX_POINT('',#117796); +#117796 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#117797 = LINE('',#117798,#117799); +#117798 = CARTESIAN_POINT('',(0.1,-12.55,-3.1)); +#117799 = VECTOR('',#117800,1.); +#117800 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117801 = ORIENTED_EDGE('',*,*,#117802,.T.); +#117802 = EDGE_CURVE('',#117795,#117770,#117803,.T.); +#117803 = LINE('',#117804,#117805); +#117804 = CARTESIAN_POINT('',(0.1,-12.85,-3.1)); +#117805 = VECTOR('',#117806,1.); +#117806 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117807 = PLANE('',#117808); +#117808 = AXIS2_PLACEMENT_3D('',#117809,#117810,#117811); +#117809 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#117810 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117811 = DIRECTION('',(0.,0.,1.)); +#117812 = ADVANCED_FACE('',(#117813),#117824,.T.); +#117813 = FACE_BOUND('',#117814,.T.); +#117814 = EDGE_LOOP('',(#117815,#117821,#117822,#117823)); +#117815 = ORIENTED_EDGE('',*,*,#117816,.F.); +#117816 = EDGE_CURVE('',#115873,#115897,#117817,.T.); +#117817 = LINE('',#117818,#117819); +#117818 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#117819 = VECTOR('',#117820,1.); +#117820 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117821 = ORIENTED_EDGE('',*,*,#115880,.T.); +#117822 = ORIENTED_EDGE('',*,*,#115888,.T.); +#117823 = ORIENTED_EDGE('',*,*,#115896,.T.); +#117824 = PLANE('',#117825); +#117825 = AXIS2_PLACEMENT_3D('',#117826,#117827,#117828); +#117826 = CARTESIAN_POINT('',(-0.1,-13.,0.2)); +#117827 = DIRECTION('',(0.,-0.,-1.)); +#117828 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117829 = ADVANCED_FACE('',(#117830),#117871,.T.); +#117830 = FACE_BOUND('',#117831,.T.); +#117831 = EDGE_LOOP('',(#117832,#117840,#117841,#117849,#117857,#117865) + ); +#117832 = ORIENTED_EDGE('',*,*,#117833,.T.); +#117833 = EDGE_CURVE('',#117834,#115865,#117836,.T.); +#117834 = VERTEX_POINT('',#117835); +#117835 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#117836 = LINE('',#117837,#117838); +#117837 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#117838 = VECTOR('',#117839,1.); +#117839 = DIRECTION('',(0.,0.,1.)); +#117840 = ORIENTED_EDGE('',*,*,#115872,.F.); +#117841 = ORIENTED_EDGE('',*,*,#117842,.T.); +#117842 = EDGE_CURVE('',#115873,#117843,#117845,.T.); +#117843 = VERTEX_POINT('',#117844); +#117844 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#117845 = LINE('',#117846,#117847); +#117846 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#117847 = VECTOR('',#117848,1.); +#117848 = DIRECTION('',(0.,0.,-1.)); +#117849 = ORIENTED_EDGE('',*,*,#117850,.T.); +#117850 = EDGE_CURVE('',#117843,#117851,#117853,.T.); +#117851 = VERTEX_POINT('',#117852); +#117852 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#117853 = LINE('',#117854,#117855); +#117854 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#117855 = VECTOR('',#117856,1.); +#117856 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117857 = ORIENTED_EDGE('',*,*,#117858,.F.); +#117858 = EDGE_CURVE('',#117859,#117851,#117861,.T.); +#117859 = VERTEX_POINT('',#117860); +#117860 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#117861 = LINE('',#117862,#117863); +#117862 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#117863 = VECTOR('',#117864,1.); +#117864 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117865 = ORIENTED_EDGE('',*,*,#117866,.T.); +#117866 = EDGE_CURVE('',#117859,#117834,#117867,.T.); +#117867 = LINE('',#117868,#117869); +#117868 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#117869 = VECTOR('',#117870,1.); +#117870 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117871 = PLANE('',#117872); +#117872 = AXIS2_PLACEMENT_3D('',#117873,#117874,#117875); +#117873 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#117874 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117875 = DIRECTION('',(0.,0.,1.)); +#117876 = ADVANCED_FACE('',(#117877),#117888,.T.); +#117877 = FACE_BOUND('',#117878,.T.); +#117878 = EDGE_LOOP('',(#117879,#117880,#117881,#117887)); +#117879 = ORIENTED_EDGE('',*,*,#115920,.F.); +#117880 = ORIENTED_EDGE('',*,*,#115930,.T.); +#117881 = ORIENTED_EDGE('',*,*,#117882,.T.); +#117882 = EDGE_CURVE('',#115931,#115971,#117883,.T.); +#117883 = LINE('',#117884,#117885); +#117884 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#117885 = VECTOR('',#117886,1.); +#117886 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117887 = ORIENTED_EDGE('',*,*,#115978,.T.); +#117888 = PLANE('',#117889); +#117889 = AXIS2_PLACEMENT_3D('',#117890,#117891,#117892); +#117890 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#117891 = DIRECTION('',(0.,-0.,-1.)); +#117892 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117893 = ADVANCED_FACE('',(#117894),#117935,.F.); +#117894 = FACE_BOUND('',#117895,.F.); +#117895 = EDGE_LOOP('',(#117896,#117904,#117905,#117913,#117921,#117929) + ); +#117896 = ORIENTED_EDGE('',*,*,#117897,.T.); +#117897 = EDGE_CURVE('',#117898,#115971,#117900,.T.); +#117898 = VERTEX_POINT('',#117899); +#117899 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#117900 = LINE('',#117901,#117902); +#117901 = CARTESIAN_POINT('',(0.1,-10.46,-2.5)); +#117902 = VECTOR('',#117903,1.); +#117903 = DIRECTION('',(0.,0.,1.)); +#117904 = ORIENTED_EDGE('',*,*,#115970,.F.); +#117905 = ORIENTED_EDGE('',*,*,#117906,.T.); +#117906 = EDGE_CURVE('',#115963,#117907,#117909,.T.); +#117907 = VERTEX_POINT('',#117908); +#117908 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#117909 = LINE('',#117910,#117911); +#117910 = CARTESIAN_POINT('',(0.1,-9.86,0.2)); +#117911 = VECTOR('',#117912,1.); +#117912 = DIRECTION('',(0.,0.,-1.)); +#117913 = ORIENTED_EDGE('',*,*,#117914,.T.); +#117914 = EDGE_CURVE('',#117907,#117915,#117917,.T.); +#117915 = VERTEX_POINT('',#117916); +#117916 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#117917 = LINE('',#117918,#117919); +#117918 = CARTESIAN_POINT('',(0.1,-9.86,-2.5)); +#117919 = VECTOR('',#117920,1.); +#117920 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117921 = ORIENTED_EDGE('',*,*,#117922,.T.); +#117922 = EDGE_CURVE('',#117915,#117923,#117925,.T.); +#117923 = VERTEX_POINT('',#117924); +#117924 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#117925 = LINE('',#117926,#117927); +#117926 = CARTESIAN_POINT('',(0.1,-10.01,-3.1)); +#117927 = VECTOR('',#117928,1.); +#117928 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117929 = ORIENTED_EDGE('',*,*,#117930,.T.); +#117930 = EDGE_CURVE('',#117923,#117898,#117931,.T.); +#117931 = LINE('',#117932,#117933); +#117932 = CARTESIAN_POINT('',(0.1,-10.31,-3.1)); +#117933 = VECTOR('',#117934,1.); +#117934 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117935 = PLANE('',#117936); +#117936 = AXIS2_PLACEMENT_3D('',#117937,#117938,#117939); +#117937 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#117938 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#117939 = DIRECTION('',(0.,0.,1.)); +#117940 = ADVANCED_FACE('',(#117941),#117952,.T.); +#117941 = FACE_BOUND('',#117942,.T.); +#117942 = EDGE_LOOP('',(#117943,#117949,#117950,#117951)); +#117943 = ORIENTED_EDGE('',*,*,#117944,.F.); +#117944 = EDGE_CURVE('',#115939,#115963,#117945,.T.); +#117945 = LINE('',#117946,#117947); +#117946 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#117947 = VECTOR('',#117948,1.); +#117948 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#117949 = ORIENTED_EDGE('',*,*,#115946,.T.); +#117950 = ORIENTED_EDGE('',*,*,#115954,.T.); +#117951 = ORIENTED_EDGE('',*,*,#115962,.T.); +#117952 = PLANE('',#117953); +#117953 = AXIS2_PLACEMENT_3D('',#117954,#117955,#117956); +#117954 = CARTESIAN_POINT('',(-0.1,-10.46,0.2)); +#117955 = DIRECTION('',(0.,-0.,-1.)); +#117956 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#117957 = ADVANCED_FACE('',(#117958),#117999,.T.); +#117958 = FACE_BOUND('',#117959,.T.); +#117959 = EDGE_LOOP('',(#117960,#117968,#117969,#117977,#117985,#117993) + ); +#117960 = ORIENTED_EDGE('',*,*,#117961,.T.); +#117961 = EDGE_CURVE('',#117962,#115931,#117964,.T.); +#117962 = VERTEX_POINT('',#117963); +#117963 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#117964 = LINE('',#117965,#117966); +#117965 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#117966 = VECTOR('',#117967,1.); +#117967 = DIRECTION('',(0.,0.,1.)); +#117968 = ORIENTED_EDGE('',*,*,#115938,.F.); +#117969 = ORIENTED_EDGE('',*,*,#117970,.T.); +#117970 = EDGE_CURVE('',#115939,#117971,#117973,.T.); +#117971 = VERTEX_POINT('',#117972); +#117972 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#117973 = LINE('',#117974,#117975); +#117974 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#117975 = VECTOR('',#117976,1.); +#117976 = DIRECTION('',(0.,0.,-1.)); +#117977 = ORIENTED_EDGE('',*,*,#117978,.T.); +#117978 = EDGE_CURVE('',#117971,#117979,#117981,.T.); +#117979 = VERTEX_POINT('',#117980); +#117980 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#117981 = LINE('',#117982,#117983); +#117982 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#117983 = VECTOR('',#117984,1.); +#117984 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#117985 = ORIENTED_EDGE('',*,*,#117986,.F.); +#117986 = EDGE_CURVE('',#117987,#117979,#117989,.T.); +#117987 = VERTEX_POINT('',#117988); +#117988 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#117989 = LINE('',#117990,#117991); +#117990 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#117991 = VECTOR('',#117992,1.); +#117992 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#117993 = ORIENTED_EDGE('',*,*,#117994,.T.); +#117994 = EDGE_CURVE('',#117987,#117962,#117995,.T.); +#117995 = LINE('',#117996,#117997); +#117996 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#117997 = VECTOR('',#117998,1.); +#117998 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#117999 = PLANE('',#118000); +#118000 = AXIS2_PLACEMENT_3D('',#118001,#118002,#118003); +#118001 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#118002 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118003 = DIRECTION('',(0.,0.,1.)); +#118004 = ADVANCED_FACE('',(#118005),#118016,.T.); +#118005 = FACE_BOUND('',#118006,.T.); +#118006 = EDGE_LOOP('',(#118007,#118008,#118009,#118015)); +#118007 = ORIENTED_EDGE('',*,*,#115986,.F.); +#118008 = ORIENTED_EDGE('',*,*,#115996,.T.); +#118009 = ORIENTED_EDGE('',*,*,#118010,.T.); +#118010 = EDGE_CURVE('',#115997,#116037,#118011,.T.); +#118011 = LINE('',#118012,#118013); +#118012 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#118013 = VECTOR('',#118014,1.); +#118014 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118015 = ORIENTED_EDGE('',*,*,#116044,.T.); +#118016 = PLANE('',#118017); +#118017 = AXIS2_PLACEMENT_3D('',#118018,#118019,#118020); +#118018 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#118019 = DIRECTION('',(0.,-0.,-1.)); +#118020 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118021 = ADVANCED_FACE('',(#118022),#118063,.F.); +#118022 = FACE_BOUND('',#118023,.F.); +#118023 = EDGE_LOOP('',(#118024,#118032,#118033,#118041,#118049,#118057) + ); +#118024 = ORIENTED_EDGE('',*,*,#118025,.T.); +#118025 = EDGE_CURVE('',#118026,#116037,#118028,.T.); +#118026 = VERTEX_POINT('',#118027); +#118027 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#118028 = LINE('',#118029,#118030); +#118029 = CARTESIAN_POINT('',(0.1,-7.92,-2.5)); +#118030 = VECTOR('',#118031,1.); +#118031 = DIRECTION('',(0.,0.,1.)); +#118032 = ORIENTED_EDGE('',*,*,#116036,.F.); +#118033 = ORIENTED_EDGE('',*,*,#118034,.T.); +#118034 = EDGE_CURVE('',#116029,#118035,#118037,.T.); +#118035 = VERTEX_POINT('',#118036); +#118036 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#118037 = LINE('',#118038,#118039); +#118038 = CARTESIAN_POINT('',(0.1,-7.32,0.2)); +#118039 = VECTOR('',#118040,1.); +#118040 = DIRECTION('',(0.,0.,-1.)); +#118041 = ORIENTED_EDGE('',*,*,#118042,.T.); +#118042 = EDGE_CURVE('',#118035,#118043,#118045,.T.); +#118043 = VERTEX_POINT('',#118044); +#118044 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#118045 = LINE('',#118046,#118047); +#118046 = CARTESIAN_POINT('',(0.1,-7.32,-2.5)); +#118047 = VECTOR('',#118048,1.); +#118048 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118049 = ORIENTED_EDGE('',*,*,#118050,.T.); +#118050 = EDGE_CURVE('',#118043,#118051,#118053,.T.); +#118051 = VERTEX_POINT('',#118052); +#118052 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#118053 = LINE('',#118054,#118055); +#118054 = CARTESIAN_POINT('',(0.1,-7.47,-3.1)); +#118055 = VECTOR('',#118056,1.); +#118056 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118057 = ORIENTED_EDGE('',*,*,#118058,.T.); +#118058 = EDGE_CURVE('',#118051,#118026,#118059,.T.); +#118059 = LINE('',#118060,#118061); +#118060 = CARTESIAN_POINT('',(0.1,-7.77,-3.1)); +#118061 = VECTOR('',#118062,1.); +#118062 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118063 = PLANE('',#118064); +#118064 = AXIS2_PLACEMENT_3D('',#118065,#118066,#118067); +#118065 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#118066 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118067 = DIRECTION('',(0.,0.,1.)); +#118068 = ADVANCED_FACE('',(#118069),#118080,.T.); +#118069 = FACE_BOUND('',#118070,.T.); +#118070 = EDGE_LOOP('',(#118071,#118077,#118078,#118079)); +#118071 = ORIENTED_EDGE('',*,*,#118072,.F.); +#118072 = EDGE_CURVE('',#116005,#116029,#118073,.T.); +#118073 = LINE('',#118074,#118075); +#118074 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#118075 = VECTOR('',#118076,1.); +#118076 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118077 = ORIENTED_EDGE('',*,*,#116012,.T.); +#118078 = ORIENTED_EDGE('',*,*,#116020,.T.); +#118079 = ORIENTED_EDGE('',*,*,#116028,.T.); +#118080 = PLANE('',#118081); +#118081 = AXIS2_PLACEMENT_3D('',#118082,#118083,#118084); +#118082 = CARTESIAN_POINT('',(-0.1,-7.92,0.2)); +#118083 = DIRECTION('',(0.,-0.,-1.)); +#118084 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118085 = ADVANCED_FACE('',(#118086),#118127,.T.); +#118086 = FACE_BOUND('',#118087,.T.); +#118087 = EDGE_LOOP('',(#118088,#118096,#118097,#118105,#118113,#118121) + ); +#118088 = ORIENTED_EDGE('',*,*,#118089,.T.); +#118089 = EDGE_CURVE('',#118090,#115997,#118092,.T.); +#118090 = VERTEX_POINT('',#118091); +#118091 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#118092 = LINE('',#118093,#118094); +#118093 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#118094 = VECTOR('',#118095,1.); +#118095 = DIRECTION('',(0.,0.,1.)); +#118096 = ORIENTED_EDGE('',*,*,#116004,.F.); +#118097 = ORIENTED_EDGE('',*,*,#118098,.T.); +#118098 = EDGE_CURVE('',#116005,#118099,#118101,.T.); +#118099 = VERTEX_POINT('',#118100); +#118100 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#118101 = LINE('',#118102,#118103); +#118102 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#118103 = VECTOR('',#118104,1.); +#118104 = DIRECTION('',(0.,0.,-1.)); +#118105 = ORIENTED_EDGE('',*,*,#118106,.T.); +#118106 = EDGE_CURVE('',#118099,#118107,#118109,.T.); +#118107 = VERTEX_POINT('',#118108); +#118108 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#118109 = LINE('',#118110,#118111); +#118110 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#118111 = VECTOR('',#118112,1.); +#118112 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118113 = ORIENTED_EDGE('',*,*,#118114,.F.); +#118114 = EDGE_CURVE('',#118115,#118107,#118117,.T.); +#118115 = VERTEX_POINT('',#118116); +#118116 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#118117 = LINE('',#118118,#118119); +#118118 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#118119 = VECTOR('',#118120,1.); +#118120 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118121 = ORIENTED_EDGE('',*,*,#118122,.T.); +#118122 = EDGE_CURVE('',#118115,#118090,#118123,.T.); +#118123 = LINE('',#118124,#118125); +#118124 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#118125 = VECTOR('',#118126,1.); +#118126 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118127 = PLANE('',#118128); +#118128 = AXIS2_PLACEMENT_3D('',#118129,#118130,#118131); +#118129 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#118130 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118131 = DIRECTION('',(0.,0.,1.)); +#118132 = ADVANCED_FACE('',(#118133),#118144,.T.); +#118133 = FACE_BOUND('',#118134,.T.); +#118134 = EDGE_LOOP('',(#118135,#118136,#118137,#118143)); +#118135 = ORIENTED_EDGE('',*,*,#116052,.F.); +#118136 = ORIENTED_EDGE('',*,*,#116062,.T.); +#118137 = ORIENTED_EDGE('',*,*,#118138,.T.); +#118138 = EDGE_CURVE('',#116063,#116103,#118139,.T.); +#118139 = LINE('',#118140,#118141); +#118140 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#118141 = VECTOR('',#118142,1.); +#118142 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118143 = ORIENTED_EDGE('',*,*,#116110,.T.); +#118144 = PLANE('',#118145); +#118145 = AXIS2_PLACEMENT_3D('',#118146,#118147,#118148); +#118146 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#118147 = DIRECTION('',(0.,-0.,-1.)); +#118148 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118149 = ADVANCED_FACE('',(#118150),#118191,.F.); +#118150 = FACE_BOUND('',#118151,.F.); +#118151 = EDGE_LOOP('',(#118152,#118160,#118161,#118169,#118177,#118185) + ); +#118152 = ORIENTED_EDGE('',*,*,#118153,.T.); +#118153 = EDGE_CURVE('',#118154,#116103,#118156,.T.); +#118154 = VERTEX_POINT('',#118155); +#118155 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#118156 = LINE('',#118157,#118158); +#118157 = CARTESIAN_POINT('',(0.1,-5.38,-2.5)); +#118158 = VECTOR('',#118159,1.); +#118159 = DIRECTION('',(0.,0.,1.)); +#118160 = ORIENTED_EDGE('',*,*,#116102,.F.); +#118161 = ORIENTED_EDGE('',*,*,#118162,.T.); +#118162 = EDGE_CURVE('',#116095,#118163,#118165,.T.); +#118163 = VERTEX_POINT('',#118164); +#118164 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#118165 = LINE('',#118166,#118167); +#118166 = CARTESIAN_POINT('',(0.1,-4.78,0.2)); +#118167 = VECTOR('',#118168,1.); +#118168 = DIRECTION('',(0.,0.,-1.)); +#118169 = ORIENTED_EDGE('',*,*,#118170,.T.); +#118170 = EDGE_CURVE('',#118163,#118171,#118173,.T.); +#118171 = VERTEX_POINT('',#118172); +#118172 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#118173 = LINE('',#118174,#118175); +#118174 = CARTESIAN_POINT('',(0.1,-4.78,-2.5)); +#118175 = VECTOR('',#118176,1.); +#118176 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118177 = ORIENTED_EDGE('',*,*,#118178,.T.); +#118178 = EDGE_CURVE('',#118171,#118179,#118181,.T.); +#118179 = VERTEX_POINT('',#118180); +#118180 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#118181 = LINE('',#118182,#118183); +#118182 = CARTESIAN_POINT('',(0.1,-4.93,-3.1)); +#118183 = VECTOR('',#118184,1.); +#118184 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118185 = ORIENTED_EDGE('',*,*,#118186,.T.); +#118186 = EDGE_CURVE('',#118179,#118154,#118187,.T.); +#118187 = LINE('',#118188,#118189); +#118188 = CARTESIAN_POINT('',(0.1,-5.23,-3.1)); +#118189 = VECTOR('',#118190,1.); +#118190 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118191 = PLANE('',#118192); +#118192 = AXIS2_PLACEMENT_3D('',#118193,#118194,#118195); +#118193 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#118194 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118195 = DIRECTION('',(0.,0.,1.)); +#118196 = ADVANCED_FACE('',(#118197),#118208,.T.); +#118197 = FACE_BOUND('',#118198,.T.); +#118198 = EDGE_LOOP('',(#118199,#118205,#118206,#118207)); +#118199 = ORIENTED_EDGE('',*,*,#118200,.F.); +#118200 = EDGE_CURVE('',#116071,#116095,#118201,.T.); +#118201 = LINE('',#118202,#118203); +#118202 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#118203 = VECTOR('',#118204,1.); +#118204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118205 = ORIENTED_EDGE('',*,*,#116078,.T.); +#118206 = ORIENTED_EDGE('',*,*,#116086,.T.); +#118207 = ORIENTED_EDGE('',*,*,#116094,.T.); +#118208 = PLANE('',#118209); +#118209 = AXIS2_PLACEMENT_3D('',#118210,#118211,#118212); +#118210 = CARTESIAN_POINT('',(-0.1,-5.38,0.2)); +#118211 = DIRECTION('',(0.,-0.,-1.)); +#118212 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118213 = ADVANCED_FACE('',(#118214),#118255,.T.); +#118214 = FACE_BOUND('',#118215,.T.); +#118215 = EDGE_LOOP('',(#118216,#118224,#118225,#118233,#118241,#118249) + ); +#118216 = ORIENTED_EDGE('',*,*,#118217,.T.); +#118217 = EDGE_CURVE('',#118218,#116063,#118220,.T.); +#118218 = VERTEX_POINT('',#118219); +#118219 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#118220 = LINE('',#118221,#118222); +#118221 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#118222 = VECTOR('',#118223,1.); +#118223 = DIRECTION('',(0.,0.,1.)); +#118224 = ORIENTED_EDGE('',*,*,#116070,.F.); +#118225 = ORIENTED_EDGE('',*,*,#118226,.T.); +#118226 = EDGE_CURVE('',#116071,#118227,#118229,.T.); +#118227 = VERTEX_POINT('',#118228); +#118228 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#118229 = LINE('',#118230,#118231); +#118230 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#118231 = VECTOR('',#118232,1.); +#118232 = DIRECTION('',(0.,0.,-1.)); +#118233 = ORIENTED_EDGE('',*,*,#118234,.T.); +#118234 = EDGE_CURVE('',#118227,#118235,#118237,.T.); +#118235 = VERTEX_POINT('',#118236); +#118236 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#118237 = LINE('',#118238,#118239); +#118238 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#118239 = VECTOR('',#118240,1.); +#118240 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118241 = ORIENTED_EDGE('',*,*,#118242,.F.); +#118242 = EDGE_CURVE('',#118243,#118235,#118245,.T.); +#118243 = VERTEX_POINT('',#118244); +#118244 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#118245 = LINE('',#118246,#118247); +#118246 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#118247 = VECTOR('',#118248,1.); +#118248 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118249 = ORIENTED_EDGE('',*,*,#118250,.T.); +#118250 = EDGE_CURVE('',#118243,#118218,#118251,.T.); +#118251 = LINE('',#118252,#118253); +#118252 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#118253 = VECTOR('',#118254,1.); +#118254 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118255 = PLANE('',#118256); +#118256 = AXIS2_PLACEMENT_3D('',#118257,#118258,#118259); +#118257 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#118258 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118259 = DIRECTION('',(0.,0.,1.)); +#118260 = ADVANCED_FACE('',(#118261),#118272,.T.); +#118261 = FACE_BOUND('',#118262,.T.); +#118262 = EDGE_LOOP('',(#118263,#118264,#118265,#118271)); +#118263 = ORIENTED_EDGE('',*,*,#116118,.F.); +#118264 = ORIENTED_EDGE('',*,*,#116128,.T.); +#118265 = ORIENTED_EDGE('',*,*,#118266,.T.); +#118266 = EDGE_CURVE('',#116129,#116169,#118267,.T.); +#118267 = LINE('',#118268,#118269); +#118268 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#118269 = VECTOR('',#118270,1.); +#118270 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118271 = ORIENTED_EDGE('',*,*,#116176,.T.); +#118272 = PLANE('',#118273); +#118273 = AXIS2_PLACEMENT_3D('',#118274,#118275,#118276); +#118274 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#118275 = DIRECTION('',(0.,-0.,-1.)); +#118276 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118277 = ADVANCED_FACE('',(#118278),#118319,.F.); +#118278 = FACE_BOUND('',#118279,.F.); +#118279 = EDGE_LOOP('',(#118280,#118288,#118289,#118297,#118305,#118313) + ); +#118280 = ORIENTED_EDGE('',*,*,#118281,.T.); +#118281 = EDGE_CURVE('',#118282,#116169,#118284,.T.); +#118282 = VERTEX_POINT('',#118283); +#118283 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#118284 = LINE('',#118285,#118286); +#118285 = CARTESIAN_POINT('',(0.1,-2.84,-2.5)); +#118286 = VECTOR('',#118287,1.); +#118287 = DIRECTION('',(0.,0.,1.)); +#118288 = ORIENTED_EDGE('',*,*,#116168,.F.); +#118289 = ORIENTED_EDGE('',*,*,#118290,.T.); +#118290 = EDGE_CURVE('',#116161,#118291,#118293,.T.); +#118291 = VERTEX_POINT('',#118292); +#118292 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#118293 = LINE('',#118294,#118295); +#118294 = CARTESIAN_POINT('',(0.1,-2.24,0.2)); +#118295 = VECTOR('',#118296,1.); +#118296 = DIRECTION('',(0.,0.,-1.)); +#118297 = ORIENTED_EDGE('',*,*,#118298,.T.); +#118298 = EDGE_CURVE('',#118291,#118299,#118301,.T.); +#118299 = VERTEX_POINT('',#118300); +#118300 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#118301 = LINE('',#118302,#118303); +#118302 = CARTESIAN_POINT('',(0.1,-2.24,-2.5)); +#118303 = VECTOR('',#118304,1.); +#118304 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118305 = ORIENTED_EDGE('',*,*,#118306,.T.); +#118306 = EDGE_CURVE('',#118299,#118307,#118309,.T.); +#118307 = VERTEX_POINT('',#118308); +#118308 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#118309 = LINE('',#118310,#118311); +#118310 = CARTESIAN_POINT('',(0.1,-2.39,-3.1)); +#118311 = VECTOR('',#118312,1.); +#118312 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118313 = ORIENTED_EDGE('',*,*,#118314,.T.); +#118314 = EDGE_CURVE('',#118307,#118282,#118315,.T.); +#118315 = LINE('',#118316,#118317); +#118316 = CARTESIAN_POINT('',(0.1,-2.69,-3.1)); +#118317 = VECTOR('',#118318,1.); +#118318 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118319 = PLANE('',#118320); +#118320 = AXIS2_PLACEMENT_3D('',#118321,#118322,#118323); +#118321 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#118322 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118323 = DIRECTION('',(0.,0.,1.)); +#118324 = ADVANCED_FACE('',(#118325),#118336,.T.); +#118325 = FACE_BOUND('',#118326,.T.); +#118326 = EDGE_LOOP('',(#118327,#118333,#118334,#118335)); +#118327 = ORIENTED_EDGE('',*,*,#118328,.F.); +#118328 = EDGE_CURVE('',#116137,#116161,#118329,.T.); +#118329 = LINE('',#118330,#118331); +#118330 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#118331 = VECTOR('',#118332,1.); +#118332 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118333 = ORIENTED_EDGE('',*,*,#116144,.T.); +#118334 = ORIENTED_EDGE('',*,*,#116152,.T.); +#118335 = ORIENTED_EDGE('',*,*,#116160,.T.); +#118336 = PLANE('',#118337); +#118337 = AXIS2_PLACEMENT_3D('',#118338,#118339,#118340); +#118338 = CARTESIAN_POINT('',(-0.1,-2.84,0.2)); +#118339 = DIRECTION('',(0.,-0.,-1.)); +#118340 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118341 = ADVANCED_FACE('',(#118342),#118383,.T.); +#118342 = FACE_BOUND('',#118343,.T.); +#118343 = EDGE_LOOP('',(#118344,#118352,#118353,#118361,#118369,#118377) + ); +#118344 = ORIENTED_EDGE('',*,*,#118345,.T.); +#118345 = EDGE_CURVE('',#118346,#116129,#118348,.T.); +#118346 = VERTEX_POINT('',#118347); +#118347 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#118348 = LINE('',#118349,#118350); +#118349 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#118350 = VECTOR('',#118351,1.); +#118351 = DIRECTION('',(0.,0.,1.)); +#118352 = ORIENTED_EDGE('',*,*,#116136,.F.); +#118353 = ORIENTED_EDGE('',*,*,#118354,.T.); +#118354 = EDGE_CURVE('',#116137,#118355,#118357,.T.); +#118355 = VERTEX_POINT('',#118356); +#118356 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#118357 = LINE('',#118358,#118359); +#118358 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#118359 = VECTOR('',#118360,1.); +#118360 = DIRECTION('',(0.,0.,-1.)); +#118361 = ORIENTED_EDGE('',*,*,#118362,.T.); +#118362 = EDGE_CURVE('',#118355,#118363,#118365,.T.); +#118363 = VERTEX_POINT('',#118364); +#118364 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#118365 = LINE('',#118366,#118367); +#118366 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#118367 = VECTOR('',#118368,1.); +#118368 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118369 = ORIENTED_EDGE('',*,*,#118370,.F.); +#118370 = EDGE_CURVE('',#118371,#118363,#118373,.T.); +#118371 = VERTEX_POINT('',#118372); +#118372 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#118373 = LINE('',#118374,#118375); +#118374 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#118375 = VECTOR('',#118376,1.); +#118376 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118377 = ORIENTED_EDGE('',*,*,#118378,.T.); +#118378 = EDGE_CURVE('',#118371,#118346,#118379,.T.); +#118379 = LINE('',#118380,#118381); +#118380 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#118381 = VECTOR('',#118382,1.); +#118382 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118383 = PLANE('',#118384); +#118384 = AXIS2_PLACEMENT_3D('',#118385,#118386,#118387); +#118385 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#118386 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118387 = DIRECTION('',(0.,0.,1.)); +#118388 = ADVANCED_FACE('',(#118389),#118400,.T.); +#118389 = FACE_BOUND('',#118390,.T.); +#118390 = EDGE_LOOP('',(#118391,#118392,#118393,#118399)); +#118391 = ORIENTED_EDGE('',*,*,#116184,.F.); +#118392 = ORIENTED_EDGE('',*,*,#116194,.T.); +#118393 = ORIENTED_EDGE('',*,*,#118394,.T.); +#118394 = EDGE_CURVE('',#116195,#116235,#118395,.T.); +#118395 = LINE('',#118396,#118397); +#118396 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#118397 = VECTOR('',#118398,1.); +#118398 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118399 = ORIENTED_EDGE('',*,*,#116242,.T.); +#118400 = PLANE('',#118401); +#118401 = AXIS2_PLACEMENT_3D('',#118402,#118403,#118404); +#118402 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#118403 = DIRECTION('',(0.,-0.,-1.)); +#118404 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118405 = ADVANCED_FACE('',(#118406),#118447,.F.); +#118406 = FACE_BOUND('',#118407,.F.); +#118407 = EDGE_LOOP('',(#118408,#118416,#118417,#118425,#118433,#118441) + ); +#118408 = ORIENTED_EDGE('',*,*,#118409,.T.); +#118409 = EDGE_CURVE('',#118410,#116235,#118412,.T.); +#118410 = VERTEX_POINT('',#118411); +#118411 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#118412 = LINE('',#118413,#118414); +#118413 = CARTESIAN_POINT('',(0.1,-0.3,-2.5)); +#118414 = VECTOR('',#118415,1.); +#118415 = DIRECTION('',(0.,0.,1.)); +#118416 = ORIENTED_EDGE('',*,*,#116234,.F.); +#118417 = ORIENTED_EDGE('',*,*,#118418,.T.); +#118418 = EDGE_CURVE('',#116227,#118419,#118421,.T.); +#118419 = VERTEX_POINT('',#118420); +#118420 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#118421 = LINE('',#118422,#118423); +#118422 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#118423 = VECTOR('',#118424,1.); +#118424 = DIRECTION('',(0.,0.,-1.)); +#118425 = ORIENTED_EDGE('',*,*,#118426,.T.); +#118426 = EDGE_CURVE('',#118419,#118427,#118429,.T.); +#118427 = VERTEX_POINT('',#118428); +#118428 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#118429 = LINE('',#118430,#118431); +#118430 = CARTESIAN_POINT('',(0.1,0.3,-2.5)); +#118431 = VECTOR('',#118432,1.); +#118432 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118433 = ORIENTED_EDGE('',*,*,#118434,.T.); +#118434 = EDGE_CURVE('',#118427,#118435,#118437,.T.); +#118435 = VERTEX_POINT('',#118436); +#118436 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#118437 = LINE('',#118438,#118439); +#118438 = CARTESIAN_POINT('',(0.1,0.15,-3.1)); +#118439 = VECTOR('',#118440,1.); +#118440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118441 = ORIENTED_EDGE('',*,*,#118442,.T.); +#118442 = EDGE_CURVE('',#118435,#118410,#118443,.T.); +#118443 = LINE('',#118444,#118445); +#118444 = CARTESIAN_POINT('',(0.1,-0.15,-3.1)); +#118445 = VECTOR('',#118446,1.); +#118446 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118447 = PLANE('',#118448); +#118448 = AXIS2_PLACEMENT_3D('',#118449,#118450,#118451); +#118449 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#118450 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118451 = DIRECTION('',(0.,0.,1.)); +#118452 = ADVANCED_FACE('',(#118453),#118464,.T.); +#118453 = FACE_BOUND('',#118454,.T.); +#118454 = EDGE_LOOP('',(#118455,#118461,#118462,#118463)); +#118455 = ORIENTED_EDGE('',*,*,#118456,.F.); +#118456 = EDGE_CURVE('',#116203,#116227,#118457,.T.); +#118457 = LINE('',#118458,#118459); +#118458 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#118459 = VECTOR('',#118460,1.); +#118460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118461 = ORIENTED_EDGE('',*,*,#116210,.T.); +#118462 = ORIENTED_EDGE('',*,*,#116218,.T.); +#118463 = ORIENTED_EDGE('',*,*,#116226,.T.); +#118464 = PLANE('',#118465); +#118465 = AXIS2_PLACEMENT_3D('',#118466,#118467,#118468); +#118466 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#118467 = DIRECTION('',(0.,-0.,-1.)); +#118468 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118469 = ADVANCED_FACE('',(#118470),#118511,.T.); +#118470 = FACE_BOUND('',#118471,.T.); +#118471 = EDGE_LOOP('',(#118472,#118480,#118481,#118489,#118497,#118505) + ); +#118472 = ORIENTED_EDGE('',*,*,#118473,.T.); +#118473 = EDGE_CURVE('',#118474,#116195,#118476,.T.); +#118474 = VERTEX_POINT('',#118475); +#118475 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#118476 = LINE('',#118477,#118478); +#118477 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#118478 = VECTOR('',#118479,1.); +#118479 = DIRECTION('',(0.,0.,1.)); +#118480 = ORIENTED_EDGE('',*,*,#116202,.F.); +#118481 = ORIENTED_EDGE('',*,*,#118482,.T.); +#118482 = EDGE_CURVE('',#116203,#118483,#118485,.T.); +#118483 = VERTEX_POINT('',#118484); +#118484 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#118485 = LINE('',#118486,#118487); +#118486 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#118487 = VECTOR('',#118488,1.); +#118488 = DIRECTION('',(0.,0.,-1.)); +#118489 = ORIENTED_EDGE('',*,*,#118490,.T.); +#118490 = EDGE_CURVE('',#118483,#118491,#118493,.T.); +#118491 = VERTEX_POINT('',#118492); +#118492 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#118493 = LINE('',#118494,#118495); +#118494 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#118495 = VECTOR('',#118496,1.); +#118496 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#118497 = ORIENTED_EDGE('',*,*,#118498,.F.); +#118498 = EDGE_CURVE('',#118499,#118491,#118501,.T.); +#118499 = VERTEX_POINT('',#118500); +#118500 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#118501 = LINE('',#118502,#118503); +#118502 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#118503 = VECTOR('',#118504,1.); +#118504 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118505 = ORIENTED_EDGE('',*,*,#118506,.T.); +#118506 = EDGE_CURVE('',#118499,#118474,#118507,.T.); +#118507 = LINE('',#118508,#118509); +#118508 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#118509 = VECTOR('',#118510,1.); +#118510 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#118511 = PLANE('',#118512); +#118512 = AXIS2_PLACEMENT_3D('',#118513,#118514,#118515); +#118513 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#118514 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118515 = DIRECTION('',(0.,0.,1.)); +#118516 = ADVANCED_FACE('',(#118517),#118542,.F.); +#118517 = FACE_BOUND('',#118518,.F.); +#118518 = EDGE_LOOP('',(#118519,#118527,#118535,#118541)); +#118519 = ORIENTED_EDGE('',*,*,#118520,.T.); +#118520 = EDGE_CURVE('',#116281,#118521,#118523,.T.); +#118521 = VERTEX_POINT('',#118522); +#118522 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#118523 = LINE('',#118524,#118525); +#118524 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#118525 = VECTOR('',#118526,1.); +#118526 = DIRECTION('',(0.,-0.,-1.)); +#118527 = ORIENTED_EDGE('',*,*,#118528,.T.); +#118528 = EDGE_CURVE('',#118521,#118529,#118531,.T.); +#118529 = VERTEX_POINT('',#118530); +#118530 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#118531 = LINE('',#118532,#118533); +#118532 = CARTESIAN_POINT('',(0.3,-23.16,0.9)); +#118533 = VECTOR('',#118534,1.); +#118534 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118535 = ORIENTED_EDGE('',*,*,#118536,.F.); +#118536 = EDGE_CURVE('',#116290,#118529,#118537,.T.); +#118537 = LINE('',#118538,#118539); +#118538 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#118539 = VECTOR('',#118540,1.); +#118540 = DIRECTION('',(0.,-0.,-1.)); +#118541 = ORIENTED_EDGE('',*,*,#116297,.F.); +#118542 = PLANE('',#118543); +#118543 = AXIS2_PLACEMENT_3D('',#118544,#118545,#118546); +#118544 = CARTESIAN_POINT('',(0.3,-23.16,8.2)); +#118545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118546 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118547 = ADVANCED_FACE('',(#118548),#118598,.F.); +#118548 = FACE_BOUND('',#118549,.F.); +#118549 = EDGE_LOOP('',(#118550,#118551,#118552,#118560,#118568,#118576, + #118584,#118592)); +#118550 = ORIENTED_EDGE('',*,*,#116321,.F.); +#118551 = ORIENTED_EDGE('',*,*,#118536,.T.); +#118552 = ORIENTED_EDGE('',*,*,#118553,.T.); +#118553 = EDGE_CURVE('',#118529,#118554,#118556,.T.); +#118554 = VERTEX_POINT('',#118555); +#118555 = CARTESIAN_POINT('',(0.1,-22.56,0.9)); +#118556 = LINE('',#118557,#118558); +#118557 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#118558 = VECTOR('',#118559,1.); +#118559 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118560 = ORIENTED_EDGE('',*,*,#118561,.T.); +#118561 = EDGE_CURVE('',#118554,#118562,#118564,.T.); +#118562 = VERTEX_POINT('',#118563); +#118563 = CARTESIAN_POINT('',(0.1,-22.56,7.4)); +#118564 = LINE('',#118565,#118566); +#118565 = CARTESIAN_POINT('',(0.1,-22.56,6.055738799212)); +#118566 = VECTOR('',#118567,1.); +#118567 = DIRECTION('',(0.,-0.,1.)); +#118568 = ORIENTED_EDGE('',*,*,#118569,.F.); +#118569 = EDGE_CURVE('',#118570,#118562,#118572,.T.); +#118570 = VERTEX_POINT('',#118571); +#118571 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#118572 = LINE('',#118573,#118574); +#118573 = CARTESIAN_POINT('',(-0.1,-22.56,7.4)); +#118574 = VECTOR('',#118575,1.); +#118575 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118576 = ORIENTED_EDGE('',*,*,#118577,.F.); +#118577 = EDGE_CURVE('',#118578,#118570,#118580,.T.); +#118578 = VERTEX_POINT('',#118579); +#118579 = CARTESIAN_POINT('',(-0.1,-22.56,0.9)); +#118580 = LINE('',#118581,#118582); +#118581 = CARTESIAN_POINT('',(-0.1,-22.56,6.055738799212)); +#118582 = VECTOR('',#118583,1.); +#118583 = DIRECTION('',(0.,-0.,1.)); +#118584 = ORIENTED_EDGE('',*,*,#118585,.T.); +#118585 = EDGE_CURVE('',#118578,#118586,#118588,.T.); +#118586 = VERTEX_POINT('',#118587); +#118587 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#118588 = LINE('',#118589,#118590); +#118589 = CARTESIAN_POINT('',(0.3,-22.56,0.9)); +#118590 = VECTOR('',#118591,1.); +#118591 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118592 = ORIENTED_EDGE('',*,*,#118593,.F.); +#118593 = EDGE_CURVE('',#116314,#118586,#118594,.T.); +#118594 = LINE('',#118595,#118596); +#118595 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#118596 = VECTOR('',#118597,1.); +#118597 = DIRECTION('',(0.,-0.,-1.)); +#118598 = PLANE('',#118599); +#118599 = AXIS2_PLACEMENT_3D('',#118600,#118601,#118602); +#118600 = CARTESIAN_POINT('',(0.3,-22.56,8.2)); +#118601 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118602 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118603 = ADVANCED_FACE('',(#118604),#118622,.F.); +#118604 = FACE_BOUND('',#118605,.F.); +#118605 = EDGE_LOOP('',(#118606,#118607,#118615,#118621)); +#118606 = ORIENTED_EDGE('',*,*,#118593,.T.); +#118607 = ORIENTED_EDGE('',*,*,#118608,.T.); +#118608 = EDGE_CURVE('',#118586,#118609,#118611,.T.); +#118609 = VERTEX_POINT('',#118610); +#118610 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#118611 = LINE('',#118612,#118613); +#118612 = CARTESIAN_POINT('',(-0.3,-22.56,0.9)); +#118613 = VECTOR('',#118614,1.); +#118614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118615 = ORIENTED_EDGE('',*,*,#118616,.F.); +#118616 = EDGE_CURVE('',#116338,#118609,#118617,.T.); +#118617 = LINE('',#118618,#118619); +#118618 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#118619 = VECTOR('',#118620,1.); +#118620 = DIRECTION('',(0.,-0.,-1.)); +#118621 = ORIENTED_EDGE('',*,*,#116345,.F.); +#118622 = PLANE('',#118623); +#118623 = AXIS2_PLACEMENT_3D('',#118624,#118625,#118626); +#118624 = CARTESIAN_POINT('',(-0.3,-22.56,8.2)); +#118625 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118626 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118627 = ADVANCED_FACE('',(#118628),#118671,.F.); +#118628 = FACE_BOUND('',#118629,.F.); +#118629 = EDGE_LOOP('',(#118630,#118631,#118632,#118640,#118648,#118656, + #118664,#118670)); +#118630 = ORIENTED_EDGE('',*,*,#116362,.F.); +#118631 = ORIENTED_EDGE('',*,*,#118616,.T.); +#118632 = ORIENTED_EDGE('',*,*,#118633,.T.); +#118633 = EDGE_CURVE('',#118609,#118634,#118636,.T.); +#118634 = VERTEX_POINT('',#118635); +#118635 = CARTESIAN_POINT('',(-0.1,-23.16,0.9)); +#118636 = LINE('',#118637,#118638); +#118637 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#118638 = VECTOR('',#118639,1.); +#118639 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118640 = ORIENTED_EDGE('',*,*,#118641,.F.); +#118641 = EDGE_CURVE('',#118642,#118634,#118644,.T.); +#118642 = VERTEX_POINT('',#118643); +#118643 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#118644 = LINE('',#118645,#118646); +#118645 = CARTESIAN_POINT('',(-0.1,-23.16,6.055738799212)); +#118646 = VECTOR('',#118647,1.); +#118647 = DIRECTION('',(-0.,0.,-1.)); +#118648 = ORIENTED_EDGE('',*,*,#118649,.T.); +#118649 = EDGE_CURVE('',#118642,#118650,#118652,.T.); +#118650 = VERTEX_POINT('',#118651); +#118651 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#118652 = LINE('',#118653,#118654); +#118653 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#118654 = VECTOR('',#118655,1.); +#118655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118656 = ORIENTED_EDGE('',*,*,#118657,.T.); +#118657 = EDGE_CURVE('',#118650,#118658,#118660,.T.); +#118658 = VERTEX_POINT('',#118659); +#118659 = CARTESIAN_POINT('',(0.1,-23.16,0.9)); +#118660 = LINE('',#118661,#118662); +#118661 = CARTESIAN_POINT('',(0.1,-23.16,6.055738799212)); +#118662 = VECTOR('',#118663,1.); +#118663 = DIRECTION('',(-0.,0.,-1.)); +#118664 = ORIENTED_EDGE('',*,*,#118665,.T.); +#118665 = EDGE_CURVE('',#118658,#118521,#118666,.T.); +#118666 = LINE('',#118667,#118668); +#118667 = CARTESIAN_POINT('',(-0.3,-23.16,0.9)); +#118668 = VECTOR('',#118669,1.); +#118669 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118670 = ORIENTED_EDGE('',*,*,#118520,.F.); +#118671 = PLANE('',#118672); +#118672 = AXIS2_PLACEMENT_3D('',#118673,#118674,#118675); +#118673 = CARTESIAN_POINT('',(-0.3,-23.16,8.2)); +#118674 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118675 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118676 = ADVANCED_FACE('',(#118677),#118702,.F.); +#118677 = FACE_BOUND('',#118678,.F.); +#118678 = EDGE_LOOP('',(#118679,#118687,#118695,#118701)); +#118679 = ORIENTED_EDGE('',*,*,#118680,.T.); +#118680 = EDGE_CURVE('',#116377,#118681,#118683,.T.); +#118681 = VERTEX_POINT('',#118682); +#118682 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#118683 = LINE('',#118684,#118685); +#118684 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#118685 = VECTOR('',#118686,1.); +#118686 = DIRECTION('',(0.,-0.,-1.)); +#118687 = ORIENTED_EDGE('',*,*,#118688,.T.); +#118688 = EDGE_CURVE('',#118681,#118689,#118691,.T.); +#118689 = VERTEX_POINT('',#118690); +#118690 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#118691 = LINE('',#118692,#118693); +#118692 = CARTESIAN_POINT('',(0.3,-20.62,0.9)); +#118693 = VECTOR('',#118694,1.); +#118694 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118695 = ORIENTED_EDGE('',*,*,#118696,.F.); +#118696 = EDGE_CURVE('',#116386,#118689,#118697,.T.); +#118697 = LINE('',#118698,#118699); +#118698 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#118699 = VECTOR('',#118700,1.); +#118700 = DIRECTION('',(0.,-0.,-1.)); +#118701 = ORIENTED_EDGE('',*,*,#116393,.F.); +#118702 = PLANE('',#118703); +#118703 = AXIS2_PLACEMENT_3D('',#118704,#118705,#118706); +#118704 = CARTESIAN_POINT('',(0.3,-20.62,8.2)); +#118705 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118706 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118707 = ADVANCED_FACE('',(#118708),#118758,.F.); +#118708 = FACE_BOUND('',#118709,.F.); +#118709 = EDGE_LOOP('',(#118710,#118711,#118712,#118720,#118728,#118736, + #118744,#118752)); +#118710 = ORIENTED_EDGE('',*,*,#116417,.F.); +#118711 = ORIENTED_EDGE('',*,*,#118696,.T.); +#118712 = ORIENTED_EDGE('',*,*,#118713,.T.); +#118713 = EDGE_CURVE('',#118689,#118714,#118716,.T.); +#118714 = VERTEX_POINT('',#118715); +#118715 = CARTESIAN_POINT('',(0.1,-20.02,0.9)); +#118716 = LINE('',#118717,#118718); +#118717 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#118718 = VECTOR('',#118719,1.); +#118719 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118720 = ORIENTED_EDGE('',*,*,#118721,.T.); +#118721 = EDGE_CURVE('',#118714,#118722,#118724,.T.); +#118722 = VERTEX_POINT('',#118723); +#118723 = CARTESIAN_POINT('',(0.1,-20.02,7.4)); +#118724 = LINE('',#118725,#118726); +#118725 = CARTESIAN_POINT('',(0.1,-20.02,6.055738799212)); +#118726 = VECTOR('',#118727,1.); +#118727 = DIRECTION('',(0.,-0.,1.)); +#118728 = ORIENTED_EDGE('',*,*,#118729,.F.); +#118729 = EDGE_CURVE('',#118730,#118722,#118732,.T.); +#118730 = VERTEX_POINT('',#118731); +#118731 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#118732 = LINE('',#118733,#118734); +#118733 = CARTESIAN_POINT('',(-0.1,-20.02,7.4)); +#118734 = VECTOR('',#118735,1.); +#118735 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118736 = ORIENTED_EDGE('',*,*,#118737,.F.); +#118737 = EDGE_CURVE('',#118738,#118730,#118740,.T.); +#118738 = VERTEX_POINT('',#118739); +#118739 = CARTESIAN_POINT('',(-0.1,-20.02,0.9)); +#118740 = LINE('',#118741,#118742); +#118741 = CARTESIAN_POINT('',(-0.1,-20.02,6.055738799212)); +#118742 = VECTOR('',#118743,1.); +#118743 = DIRECTION('',(0.,-0.,1.)); +#118744 = ORIENTED_EDGE('',*,*,#118745,.T.); +#118745 = EDGE_CURVE('',#118738,#118746,#118748,.T.); +#118746 = VERTEX_POINT('',#118747); +#118747 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#118748 = LINE('',#118749,#118750); +#118749 = CARTESIAN_POINT('',(0.3,-20.02,0.9)); +#118750 = VECTOR('',#118751,1.); +#118751 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118752 = ORIENTED_EDGE('',*,*,#118753,.F.); +#118753 = EDGE_CURVE('',#116410,#118746,#118754,.T.); +#118754 = LINE('',#118755,#118756); +#118755 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#118756 = VECTOR('',#118757,1.); +#118757 = DIRECTION('',(0.,-0.,-1.)); +#118758 = PLANE('',#118759); +#118759 = AXIS2_PLACEMENT_3D('',#118760,#118761,#118762); +#118760 = CARTESIAN_POINT('',(0.3,-20.02,8.2)); +#118761 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118762 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118763 = ADVANCED_FACE('',(#118764),#118782,.F.); +#118764 = FACE_BOUND('',#118765,.F.); +#118765 = EDGE_LOOP('',(#118766,#118767,#118775,#118781)); +#118766 = ORIENTED_EDGE('',*,*,#118753,.T.); +#118767 = ORIENTED_EDGE('',*,*,#118768,.T.); +#118768 = EDGE_CURVE('',#118746,#118769,#118771,.T.); +#118769 = VERTEX_POINT('',#118770); +#118770 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#118771 = LINE('',#118772,#118773); +#118772 = CARTESIAN_POINT('',(-0.3,-20.02,0.9)); +#118773 = VECTOR('',#118774,1.); +#118774 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118775 = ORIENTED_EDGE('',*,*,#118776,.F.); +#118776 = EDGE_CURVE('',#116434,#118769,#118777,.T.); +#118777 = LINE('',#118778,#118779); +#118778 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#118779 = VECTOR('',#118780,1.); +#118780 = DIRECTION('',(0.,-0.,-1.)); +#118781 = ORIENTED_EDGE('',*,*,#116441,.F.); +#118782 = PLANE('',#118783); +#118783 = AXIS2_PLACEMENT_3D('',#118784,#118785,#118786); +#118784 = CARTESIAN_POINT('',(-0.3,-20.02,8.2)); +#118785 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118786 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118787 = ADVANCED_FACE('',(#118788),#118831,.F.); +#118788 = FACE_BOUND('',#118789,.F.); +#118789 = EDGE_LOOP('',(#118790,#118791,#118792,#118800,#118808,#118816, + #118824,#118830)); +#118790 = ORIENTED_EDGE('',*,*,#116458,.F.); +#118791 = ORIENTED_EDGE('',*,*,#118776,.T.); +#118792 = ORIENTED_EDGE('',*,*,#118793,.T.); +#118793 = EDGE_CURVE('',#118769,#118794,#118796,.T.); +#118794 = VERTEX_POINT('',#118795); +#118795 = CARTESIAN_POINT('',(-0.1,-20.62,0.9)); +#118796 = LINE('',#118797,#118798); +#118797 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#118798 = VECTOR('',#118799,1.); +#118799 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118800 = ORIENTED_EDGE('',*,*,#118801,.F.); +#118801 = EDGE_CURVE('',#118802,#118794,#118804,.T.); +#118802 = VERTEX_POINT('',#118803); +#118803 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#118804 = LINE('',#118805,#118806); +#118805 = CARTESIAN_POINT('',(-0.1,-20.62,6.055738799212)); +#118806 = VECTOR('',#118807,1.); +#118807 = DIRECTION('',(-0.,0.,-1.)); +#118808 = ORIENTED_EDGE('',*,*,#118809,.T.); +#118809 = EDGE_CURVE('',#118802,#118810,#118812,.T.); +#118810 = VERTEX_POINT('',#118811); +#118811 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#118812 = LINE('',#118813,#118814); +#118813 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#118814 = VECTOR('',#118815,1.); +#118815 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118816 = ORIENTED_EDGE('',*,*,#118817,.T.); +#118817 = EDGE_CURVE('',#118810,#118818,#118820,.T.); +#118818 = VERTEX_POINT('',#118819); +#118819 = CARTESIAN_POINT('',(0.1,-20.62,0.9)); +#118820 = LINE('',#118821,#118822); +#118821 = CARTESIAN_POINT('',(0.1,-20.62,6.055738799212)); +#118822 = VECTOR('',#118823,1.); +#118823 = DIRECTION('',(-0.,0.,-1.)); +#118824 = ORIENTED_EDGE('',*,*,#118825,.T.); +#118825 = EDGE_CURVE('',#118818,#118681,#118826,.T.); +#118826 = LINE('',#118827,#118828); +#118827 = CARTESIAN_POINT('',(-0.3,-20.62,0.9)); +#118828 = VECTOR('',#118829,1.); +#118829 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118830 = ORIENTED_EDGE('',*,*,#118680,.F.); +#118831 = PLANE('',#118832); +#118832 = AXIS2_PLACEMENT_3D('',#118833,#118834,#118835); +#118833 = CARTESIAN_POINT('',(-0.3,-20.62,8.2)); +#118834 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118835 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118836 = ADVANCED_FACE('',(#118837),#118862,.F.); +#118837 = FACE_BOUND('',#118838,.F.); +#118838 = EDGE_LOOP('',(#118839,#118847,#118855,#118861)); +#118839 = ORIENTED_EDGE('',*,*,#118840,.T.); +#118840 = EDGE_CURVE('',#116473,#118841,#118843,.T.); +#118841 = VERTEX_POINT('',#118842); +#118842 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#118843 = LINE('',#118844,#118845); +#118844 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#118845 = VECTOR('',#118846,1.); +#118846 = DIRECTION('',(0.,-0.,-1.)); +#118847 = ORIENTED_EDGE('',*,*,#118848,.T.); +#118848 = EDGE_CURVE('',#118841,#118849,#118851,.T.); +#118849 = VERTEX_POINT('',#118850); +#118850 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#118851 = LINE('',#118852,#118853); +#118852 = CARTESIAN_POINT('',(0.3,-18.08,0.9)); +#118853 = VECTOR('',#118854,1.); +#118854 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118855 = ORIENTED_EDGE('',*,*,#118856,.F.); +#118856 = EDGE_CURVE('',#116482,#118849,#118857,.T.); +#118857 = LINE('',#118858,#118859); +#118858 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#118859 = VECTOR('',#118860,1.); +#118860 = DIRECTION('',(0.,-0.,-1.)); +#118861 = ORIENTED_EDGE('',*,*,#116489,.F.); +#118862 = PLANE('',#118863); +#118863 = AXIS2_PLACEMENT_3D('',#118864,#118865,#118866); +#118864 = CARTESIAN_POINT('',(0.3,-18.08,8.2)); +#118865 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118866 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118867 = ADVANCED_FACE('',(#118868),#118918,.F.); +#118868 = FACE_BOUND('',#118869,.F.); +#118869 = EDGE_LOOP('',(#118870,#118871,#118872,#118880,#118888,#118896, + #118904,#118912)); +#118870 = ORIENTED_EDGE('',*,*,#116513,.F.); +#118871 = ORIENTED_EDGE('',*,*,#118856,.T.); +#118872 = ORIENTED_EDGE('',*,*,#118873,.T.); +#118873 = EDGE_CURVE('',#118849,#118874,#118876,.T.); +#118874 = VERTEX_POINT('',#118875); +#118875 = CARTESIAN_POINT('',(0.1,-17.48,0.9)); +#118876 = LINE('',#118877,#118878); +#118877 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#118878 = VECTOR('',#118879,1.); +#118879 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118880 = ORIENTED_EDGE('',*,*,#118881,.T.); +#118881 = EDGE_CURVE('',#118874,#118882,#118884,.T.); +#118882 = VERTEX_POINT('',#118883); +#118883 = CARTESIAN_POINT('',(0.1,-17.48,7.4)); +#118884 = LINE('',#118885,#118886); +#118885 = CARTESIAN_POINT('',(0.1,-17.48,6.055738799212)); +#118886 = VECTOR('',#118887,1.); +#118887 = DIRECTION('',(0.,-0.,1.)); +#118888 = ORIENTED_EDGE('',*,*,#118889,.F.); +#118889 = EDGE_CURVE('',#118890,#118882,#118892,.T.); +#118890 = VERTEX_POINT('',#118891); +#118891 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#118892 = LINE('',#118893,#118894); +#118893 = CARTESIAN_POINT('',(-0.1,-17.48,7.4)); +#118894 = VECTOR('',#118895,1.); +#118895 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118896 = ORIENTED_EDGE('',*,*,#118897,.F.); +#118897 = EDGE_CURVE('',#118898,#118890,#118900,.T.); +#118898 = VERTEX_POINT('',#118899); +#118899 = CARTESIAN_POINT('',(-0.1,-17.48,0.9)); +#118900 = LINE('',#118901,#118902); +#118901 = CARTESIAN_POINT('',(-0.1,-17.48,6.055738799212)); +#118902 = VECTOR('',#118903,1.); +#118903 = DIRECTION('',(0.,-0.,1.)); +#118904 = ORIENTED_EDGE('',*,*,#118905,.T.); +#118905 = EDGE_CURVE('',#118898,#118906,#118908,.T.); +#118906 = VERTEX_POINT('',#118907); +#118907 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#118908 = LINE('',#118909,#118910); +#118909 = CARTESIAN_POINT('',(0.3,-17.48,0.9)); +#118910 = VECTOR('',#118911,1.); +#118911 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118912 = ORIENTED_EDGE('',*,*,#118913,.F.); +#118913 = EDGE_CURVE('',#116506,#118906,#118914,.T.); +#118914 = LINE('',#118915,#118916); +#118915 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#118916 = VECTOR('',#118917,1.); +#118917 = DIRECTION('',(0.,-0.,-1.)); +#118918 = PLANE('',#118919); +#118919 = AXIS2_PLACEMENT_3D('',#118920,#118921,#118922); +#118920 = CARTESIAN_POINT('',(0.3,-17.48,8.2)); +#118921 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#118922 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118923 = ADVANCED_FACE('',(#118924),#118942,.F.); +#118924 = FACE_BOUND('',#118925,.F.); +#118925 = EDGE_LOOP('',(#118926,#118927,#118935,#118941)); +#118926 = ORIENTED_EDGE('',*,*,#118913,.T.); +#118927 = ORIENTED_EDGE('',*,*,#118928,.T.); +#118928 = EDGE_CURVE('',#118906,#118929,#118931,.T.); +#118929 = VERTEX_POINT('',#118930); +#118930 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#118931 = LINE('',#118932,#118933); +#118932 = CARTESIAN_POINT('',(-0.3,-17.48,0.9)); +#118933 = VECTOR('',#118934,1.); +#118934 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118935 = ORIENTED_EDGE('',*,*,#118936,.F.); +#118936 = EDGE_CURVE('',#116530,#118929,#118937,.T.); +#118937 = LINE('',#118938,#118939); +#118938 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#118939 = VECTOR('',#118940,1.); +#118940 = DIRECTION('',(0.,-0.,-1.)); +#118941 = ORIENTED_EDGE('',*,*,#116537,.F.); +#118942 = PLANE('',#118943); +#118943 = AXIS2_PLACEMENT_3D('',#118944,#118945,#118946); +#118944 = CARTESIAN_POINT('',(-0.3,-17.48,8.2)); +#118945 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#118946 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118947 = ADVANCED_FACE('',(#118948),#118991,.F.); +#118948 = FACE_BOUND('',#118949,.F.); +#118949 = EDGE_LOOP('',(#118950,#118951,#118952,#118960,#118968,#118976, + #118984,#118990)); +#118950 = ORIENTED_EDGE('',*,*,#116554,.F.); +#118951 = ORIENTED_EDGE('',*,*,#118936,.T.); +#118952 = ORIENTED_EDGE('',*,*,#118953,.T.); +#118953 = EDGE_CURVE('',#118929,#118954,#118956,.T.); +#118954 = VERTEX_POINT('',#118955); +#118955 = CARTESIAN_POINT('',(-0.1,-18.08,0.9)); +#118956 = LINE('',#118957,#118958); +#118957 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#118958 = VECTOR('',#118959,1.); +#118959 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118960 = ORIENTED_EDGE('',*,*,#118961,.F.); +#118961 = EDGE_CURVE('',#118962,#118954,#118964,.T.); +#118962 = VERTEX_POINT('',#118963); +#118963 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#118964 = LINE('',#118965,#118966); +#118965 = CARTESIAN_POINT('',(-0.1,-18.08,6.055738799212)); +#118966 = VECTOR('',#118967,1.); +#118967 = DIRECTION('',(-0.,0.,-1.)); +#118968 = ORIENTED_EDGE('',*,*,#118969,.T.); +#118969 = EDGE_CURVE('',#118962,#118970,#118972,.T.); +#118970 = VERTEX_POINT('',#118971); +#118971 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#118972 = LINE('',#118973,#118974); +#118973 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#118974 = VECTOR('',#118975,1.); +#118975 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118976 = ORIENTED_EDGE('',*,*,#118977,.T.); +#118977 = EDGE_CURVE('',#118970,#118978,#118980,.T.); +#118978 = VERTEX_POINT('',#118979); +#118979 = CARTESIAN_POINT('',(0.1,-18.08,0.9)); +#118980 = LINE('',#118981,#118982); +#118981 = CARTESIAN_POINT('',(0.1,-18.08,6.055738799212)); +#118982 = VECTOR('',#118983,1.); +#118983 = DIRECTION('',(-0.,0.,-1.)); +#118984 = ORIENTED_EDGE('',*,*,#118985,.T.); +#118985 = EDGE_CURVE('',#118978,#118841,#118986,.T.); +#118986 = LINE('',#118987,#118988); +#118987 = CARTESIAN_POINT('',(-0.3,-18.08,0.9)); +#118988 = VECTOR('',#118989,1.); +#118989 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118990 = ORIENTED_EDGE('',*,*,#118840,.F.); +#118991 = PLANE('',#118992); +#118992 = AXIS2_PLACEMENT_3D('',#118993,#118994,#118995); +#118993 = CARTESIAN_POINT('',(-0.3,-18.08,8.2)); +#118994 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#118995 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#118996 = ADVANCED_FACE('',(#118997),#119022,.F.); +#118997 = FACE_BOUND('',#118998,.F.); +#118998 = EDGE_LOOP('',(#118999,#119007,#119015,#119021)); +#118999 = ORIENTED_EDGE('',*,*,#119000,.T.); +#119000 = EDGE_CURVE('',#116569,#119001,#119003,.T.); +#119001 = VERTEX_POINT('',#119002); +#119002 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#119003 = LINE('',#119004,#119005); +#119004 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#119005 = VECTOR('',#119006,1.); +#119006 = DIRECTION('',(0.,-0.,-1.)); +#119007 = ORIENTED_EDGE('',*,*,#119008,.T.); +#119008 = EDGE_CURVE('',#119001,#119009,#119011,.T.); +#119009 = VERTEX_POINT('',#119010); +#119010 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#119011 = LINE('',#119012,#119013); +#119012 = CARTESIAN_POINT('',(0.3,-15.54,0.9)); +#119013 = VECTOR('',#119014,1.); +#119014 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119015 = ORIENTED_EDGE('',*,*,#119016,.F.); +#119016 = EDGE_CURVE('',#116578,#119009,#119017,.T.); +#119017 = LINE('',#119018,#119019); +#119018 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#119019 = VECTOR('',#119020,1.); +#119020 = DIRECTION('',(0.,-0.,-1.)); +#119021 = ORIENTED_EDGE('',*,*,#116585,.F.); +#119022 = PLANE('',#119023); +#119023 = AXIS2_PLACEMENT_3D('',#119024,#119025,#119026); +#119024 = CARTESIAN_POINT('',(0.3,-15.54,8.2)); +#119025 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119026 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119027 = ADVANCED_FACE('',(#119028),#119078,.F.); +#119028 = FACE_BOUND('',#119029,.F.); +#119029 = EDGE_LOOP('',(#119030,#119031,#119032,#119040,#119048,#119056, + #119064,#119072)); +#119030 = ORIENTED_EDGE('',*,*,#116609,.F.); +#119031 = ORIENTED_EDGE('',*,*,#119016,.T.); +#119032 = ORIENTED_EDGE('',*,*,#119033,.T.); +#119033 = EDGE_CURVE('',#119009,#119034,#119036,.T.); +#119034 = VERTEX_POINT('',#119035); +#119035 = CARTESIAN_POINT('',(0.1,-14.94,0.9)); +#119036 = LINE('',#119037,#119038); +#119037 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#119038 = VECTOR('',#119039,1.); +#119039 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119040 = ORIENTED_EDGE('',*,*,#119041,.T.); +#119041 = EDGE_CURVE('',#119034,#119042,#119044,.T.); +#119042 = VERTEX_POINT('',#119043); +#119043 = CARTESIAN_POINT('',(0.1,-14.94,7.4)); +#119044 = LINE('',#119045,#119046); +#119045 = CARTESIAN_POINT('',(0.1,-14.94,6.055738799212)); +#119046 = VECTOR('',#119047,1.); +#119047 = DIRECTION('',(0.,-0.,1.)); +#119048 = ORIENTED_EDGE('',*,*,#119049,.F.); +#119049 = EDGE_CURVE('',#119050,#119042,#119052,.T.); +#119050 = VERTEX_POINT('',#119051); +#119051 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#119052 = LINE('',#119053,#119054); +#119053 = CARTESIAN_POINT('',(-0.1,-14.94,7.4)); +#119054 = VECTOR('',#119055,1.); +#119055 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119056 = ORIENTED_EDGE('',*,*,#119057,.F.); +#119057 = EDGE_CURVE('',#119058,#119050,#119060,.T.); +#119058 = VERTEX_POINT('',#119059); +#119059 = CARTESIAN_POINT('',(-0.1,-14.94,0.9)); +#119060 = LINE('',#119061,#119062); +#119061 = CARTESIAN_POINT('',(-0.1,-14.94,6.055738799212)); +#119062 = VECTOR('',#119063,1.); +#119063 = DIRECTION('',(0.,-0.,1.)); +#119064 = ORIENTED_EDGE('',*,*,#119065,.T.); +#119065 = EDGE_CURVE('',#119058,#119066,#119068,.T.); +#119066 = VERTEX_POINT('',#119067); +#119067 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#119068 = LINE('',#119069,#119070); +#119069 = CARTESIAN_POINT('',(0.3,-14.94,0.9)); +#119070 = VECTOR('',#119071,1.); +#119071 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119072 = ORIENTED_EDGE('',*,*,#119073,.F.); +#119073 = EDGE_CURVE('',#116602,#119066,#119074,.T.); +#119074 = LINE('',#119075,#119076); +#119075 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#119076 = VECTOR('',#119077,1.); +#119077 = DIRECTION('',(0.,-0.,-1.)); +#119078 = PLANE('',#119079); +#119079 = AXIS2_PLACEMENT_3D('',#119080,#119081,#119082); +#119080 = CARTESIAN_POINT('',(0.3,-14.94,8.2)); +#119081 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119082 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119083 = ADVANCED_FACE('',(#119084),#119102,.F.); +#119084 = FACE_BOUND('',#119085,.F.); +#119085 = EDGE_LOOP('',(#119086,#119087,#119095,#119101)); +#119086 = ORIENTED_EDGE('',*,*,#119073,.T.); +#119087 = ORIENTED_EDGE('',*,*,#119088,.T.); +#119088 = EDGE_CURVE('',#119066,#119089,#119091,.T.); +#119089 = VERTEX_POINT('',#119090); +#119090 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#119091 = LINE('',#119092,#119093); +#119092 = CARTESIAN_POINT('',(-0.3,-14.94,0.9)); +#119093 = VECTOR('',#119094,1.); +#119094 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119095 = ORIENTED_EDGE('',*,*,#119096,.F.); +#119096 = EDGE_CURVE('',#116626,#119089,#119097,.T.); +#119097 = LINE('',#119098,#119099); +#119098 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#119099 = VECTOR('',#119100,1.); +#119100 = DIRECTION('',(0.,-0.,-1.)); +#119101 = ORIENTED_EDGE('',*,*,#116633,.F.); +#119102 = PLANE('',#119103); +#119103 = AXIS2_PLACEMENT_3D('',#119104,#119105,#119106); +#119104 = CARTESIAN_POINT('',(-0.3,-14.94,8.2)); +#119105 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119106 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119107 = ADVANCED_FACE('',(#119108),#119151,.F.); +#119108 = FACE_BOUND('',#119109,.F.); +#119109 = EDGE_LOOP('',(#119110,#119111,#119112,#119120,#119128,#119136, + #119144,#119150)); +#119110 = ORIENTED_EDGE('',*,*,#116650,.F.); +#119111 = ORIENTED_EDGE('',*,*,#119096,.T.); +#119112 = ORIENTED_EDGE('',*,*,#119113,.T.); +#119113 = EDGE_CURVE('',#119089,#119114,#119116,.T.); +#119114 = VERTEX_POINT('',#119115); +#119115 = CARTESIAN_POINT('',(-0.1,-15.54,0.9)); +#119116 = LINE('',#119117,#119118); +#119117 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#119118 = VECTOR('',#119119,1.); +#119119 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119120 = ORIENTED_EDGE('',*,*,#119121,.F.); +#119121 = EDGE_CURVE('',#119122,#119114,#119124,.T.); +#119122 = VERTEX_POINT('',#119123); +#119123 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#119124 = LINE('',#119125,#119126); +#119125 = CARTESIAN_POINT('',(-0.1,-15.54,6.055738799212)); +#119126 = VECTOR('',#119127,1.); +#119127 = DIRECTION('',(-0.,0.,-1.)); +#119128 = ORIENTED_EDGE('',*,*,#119129,.T.); +#119129 = EDGE_CURVE('',#119122,#119130,#119132,.T.); +#119130 = VERTEX_POINT('',#119131); +#119131 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#119132 = LINE('',#119133,#119134); +#119133 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#119134 = VECTOR('',#119135,1.); +#119135 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119136 = ORIENTED_EDGE('',*,*,#119137,.T.); +#119137 = EDGE_CURVE('',#119130,#119138,#119140,.T.); +#119138 = VERTEX_POINT('',#119139); +#119139 = CARTESIAN_POINT('',(0.1,-15.54,0.9)); +#119140 = LINE('',#119141,#119142); +#119141 = CARTESIAN_POINT('',(0.1,-15.54,6.055738799212)); +#119142 = VECTOR('',#119143,1.); +#119143 = DIRECTION('',(-0.,0.,-1.)); +#119144 = ORIENTED_EDGE('',*,*,#119145,.T.); +#119145 = EDGE_CURVE('',#119138,#119001,#119146,.T.); +#119146 = LINE('',#119147,#119148); +#119147 = CARTESIAN_POINT('',(-0.3,-15.54,0.9)); +#119148 = VECTOR('',#119149,1.); +#119149 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119150 = ORIENTED_EDGE('',*,*,#119000,.F.); +#119151 = PLANE('',#119152); +#119152 = AXIS2_PLACEMENT_3D('',#119153,#119154,#119155); +#119153 = CARTESIAN_POINT('',(-0.3,-15.54,8.2)); +#119154 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119155 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119156 = ADVANCED_FACE('',(#119157),#119182,.F.); +#119157 = FACE_BOUND('',#119158,.F.); +#119158 = EDGE_LOOP('',(#119159,#119167,#119175,#119181)); +#119159 = ORIENTED_EDGE('',*,*,#119160,.T.); +#119160 = EDGE_CURVE('',#116665,#119161,#119163,.T.); +#119161 = VERTEX_POINT('',#119162); +#119162 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#119163 = LINE('',#119164,#119165); +#119164 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#119165 = VECTOR('',#119166,1.); +#119166 = DIRECTION('',(0.,-0.,-1.)); +#119167 = ORIENTED_EDGE('',*,*,#119168,.T.); +#119168 = EDGE_CURVE('',#119161,#119169,#119171,.T.); +#119169 = VERTEX_POINT('',#119170); +#119170 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#119171 = LINE('',#119172,#119173); +#119172 = CARTESIAN_POINT('',(0.3,-13.,0.9)); +#119173 = VECTOR('',#119174,1.); +#119174 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119175 = ORIENTED_EDGE('',*,*,#119176,.F.); +#119176 = EDGE_CURVE('',#116674,#119169,#119177,.T.); +#119177 = LINE('',#119178,#119179); +#119178 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#119179 = VECTOR('',#119180,1.); +#119180 = DIRECTION('',(0.,-0.,-1.)); +#119181 = ORIENTED_EDGE('',*,*,#116681,.F.); +#119182 = PLANE('',#119183); +#119183 = AXIS2_PLACEMENT_3D('',#119184,#119185,#119186); +#119184 = CARTESIAN_POINT('',(0.3,-13.,8.2)); +#119185 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119186 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119187 = ADVANCED_FACE('',(#119188),#119238,.F.); +#119188 = FACE_BOUND('',#119189,.F.); +#119189 = EDGE_LOOP('',(#119190,#119191,#119192,#119200,#119208,#119216, + #119224,#119232)); +#119190 = ORIENTED_EDGE('',*,*,#116705,.F.); +#119191 = ORIENTED_EDGE('',*,*,#119176,.T.); +#119192 = ORIENTED_EDGE('',*,*,#119193,.T.); +#119193 = EDGE_CURVE('',#119169,#119194,#119196,.T.); +#119194 = VERTEX_POINT('',#119195); +#119195 = CARTESIAN_POINT('',(0.1,-12.4,0.9)); +#119196 = LINE('',#119197,#119198); +#119197 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#119198 = VECTOR('',#119199,1.); +#119199 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119200 = ORIENTED_EDGE('',*,*,#119201,.T.); +#119201 = EDGE_CURVE('',#119194,#119202,#119204,.T.); +#119202 = VERTEX_POINT('',#119203); +#119203 = CARTESIAN_POINT('',(0.1,-12.4,7.4)); +#119204 = LINE('',#119205,#119206); +#119205 = CARTESIAN_POINT('',(0.1,-12.4,6.055738799212)); +#119206 = VECTOR('',#119207,1.); +#119207 = DIRECTION('',(0.,-0.,1.)); +#119208 = ORIENTED_EDGE('',*,*,#119209,.F.); +#119209 = EDGE_CURVE('',#119210,#119202,#119212,.T.); +#119210 = VERTEX_POINT('',#119211); +#119211 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#119212 = LINE('',#119213,#119214); +#119213 = CARTESIAN_POINT('',(-0.1,-12.4,7.4)); +#119214 = VECTOR('',#119215,1.); +#119215 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119216 = ORIENTED_EDGE('',*,*,#119217,.F.); +#119217 = EDGE_CURVE('',#119218,#119210,#119220,.T.); +#119218 = VERTEX_POINT('',#119219); +#119219 = CARTESIAN_POINT('',(-0.1,-12.4,0.9)); +#119220 = LINE('',#119221,#119222); +#119221 = CARTESIAN_POINT('',(-0.1,-12.4,6.055738799212)); +#119222 = VECTOR('',#119223,1.); +#119223 = DIRECTION('',(0.,-0.,1.)); +#119224 = ORIENTED_EDGE('',*,*,#119225,.T.); +#119225 = EDGE_CURVE('',#119218,#119226,#119228,.T.); +#119226 = VERTEX_POINT('',#119227); +#119227 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#119228 = LINE('',#119229,#119230); +#119229 = CARTESIAN_POINT('',(0.3,-12.4,0.9)); +#119230 = VECTOR('',#119231,1.); +#119231 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119232 = ORIENTED_EDGE('',*,*,#119233,.F.); +#119233 = EDGE_CURVE('',#116698,#119226,#119234,.T.); +#119234 = LINE('',#119235,#119236); +#119235 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#119236 = VECTOR('',#119237,1.); +#119237 = DIRECTION('',(0.,-0.,-1.)); +#119238 = PLANE('',#119239); +#119239 = AXIS2_PLACEMENT_3D('',#119240,#119241,#119242); +#119240 = CARTESIAN_POINT('',(0.3,-12.4,8.2)); +#119241 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119242 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119243 = ADVANCED_FACE('',(#119244),#119262,.F.); +#119244 = FACE_BOUND('',#119245,.F.); +#119245 = EDGE_LOOP('',(#119246,#119247,#119255,#119261)); +#119246 = ORIENTED_EDGE('',*,*,#119233,.T.); +#119247 = ORIENTED_EDGE('',*,*,#119248,.T.); +#119248 = EDGE_CURVE('',#119226,#119249,#119251,.T.); +#119249 = VERTEX_POINT('',#119250); +#119250 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#119251 = LINE('',#119252,#119253); +#119252 = CARTESIAN_POINT('',(-0.3,-12.4,0.9)); +#119253 = VECTOR('',#119254,1.); +#119254 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119255 = ORIENTED_EDGE('',*,*,#119256,.F.); +#119256 = EDGE_CURVE('',#116722,#119249,#119257,.T.); +#119257 = LINE('',#119258,#119259); +#119258 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#119259 = VECTOR('',#119260,1.); +#119260 = DIRECTION('',(0.,-0.,-1.)); +#119261 = ORIENTED_EDGE('',*,*,#116729,.F.); +#119262 = PLANE('',#119263); +#119263 = AXIS2_PLACEMENT_3D('',#119264,#119265,#119266); +#119264 = CARTESIAN_POINT('',(-0.3,-12.4,8.2)); +#119265 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119266 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119267 = ADVANCED_FACE('',(#119268),#119311,.F.); +#119268 = FACE_BOUND('',#119269,.F.); +#119269 = EDGE_LOOP('',(#119270,#119271,#119272,#119280,#119288,#119296, + #119304,#119310)); +#119270 = ORIENTED_EDGE('',*,*,#116746,.F.); +#119271 = ORIENTED_EDGE('',*,*,#119256,.T.); +#119272 = ORIENTED_EDGE('',*,*,#119273,.T.); +#119273 = EDGE_CURVE('',#119249,#119274,#119276,.T.); +#119274 = VERTEX_POINT('',#119275); +#119275 = CARTESIAN_POINT('',(-0.1,-13.,0.9)); +#119276 = LINE('',#119277,#119278); +#119277 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#119278 = VECTOR('',#119279,1.); +#119279 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119280 = ORIENTED_EDGE('',*,*,#119281,.F.); +#119281 = EDGE_CURVE('',#119282,#119274,#119284,.T.); +#119282 = VERTEX_POINT('',#119283); +#119283 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#119284 = LINE('',#119285,#119286); +#119285 = CARTESIAN_POINT('',(-0.1,-13.,6.055738799212)); +#119286 = VECTOR('',#119287,1.); +#119287 = DIRECTION('',(-0.,0.,-1.)); +#119288 = ORIENTED_EDGE('',*,*,#119289,.T.); +#119289 = EDGE_CURVE('',#119282,#119290,#119292,.T.); +#119290 = VERTEX_POINT('',#119291); +#119291 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#119292 = LINE('',#119293,#119294); +#119293 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#119294 = VECTOR('',#119295,1.); +#119295 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119296 = ORIENTED_EDGE('',*,*,#119297,.T.); +#119297 = EDGE_CURVE('',#119290,#119298,#119300,.T.); +#119298 = VERTEX_POINT('',#119299); +#119299 = CARTESIAN_POINT('',(0.1,-13.,0.9)); +#119300 = LINE('',#119301,#119302); +#119301 = CARTESIAN_POINT('',(0.1,-13.,6.055738799212)); +#119302 = VECTOR('',#119303,1.); +#119303 = DIRECTION('',(-0.,0.,-1.)); +#119304 = ORIENTED_EDGE('',*,*,#119305,.T.); +#119305 = EDGE_CURVE('',#119298,#119161,#119306,.T.); +#119306 = LINE('',#119307,#119308); +#119307 = CARTESIAN_POINT('',(-0.3,-13.,0.9)); +#119308 = VECTOR('',#119309,1.); +#119309 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119310 = ORIENTED_EDGE('',*,*,#119160,.F.); +#119311 = PLANE('',#119312); +#119312 = AXIS2_PLACEMENT_3D('',#119313,#119314,#119315); +#119313 = CARTESIAN_POINT('',(-0.3,-13.,8.2)); +#119314 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119315 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119316 = ADVANCED_FACE('',(#119317),#119342,.F.); +#119317 = FACE_BOUND('',#119318,.F.); +#119318 = EDGE_LOOP('',(#119319,#119327,#119335,#119341)); +#119319 = ORIENTED_EDGE('',*,*,#119320,.T.); +#119320 = EDGE_CURVE('',#116761,#119321,#119323,.T.); +#119321 = VERTEX_POINT('',#119322); +#119322 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#119323 = LINE('',#119324,#119325); +#119324 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#119325 = VECTOR('',#119326,1.); +#119326 = DIRECTION('',(0.,-0.,-1.)); +#119327 = ORIENTED_EDGE('',*,*,#119328,.T.); +#119328 = EDGE_CURVE('',#119321,#119329,#119331,.T.); +#119329 = VERTEX_POINT('',#119330); +#119330 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#119331 = LINE('',#119332,#119333); +#119332 = CARTESIAN_POINT('',(0.3,-10.46,0.9)); +#119333 = VECTOR('',#119334,1.); +#119334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119335 = ORIENTED_EDGE('',*,*,#119336,.F.); +#119336 = EDGE_CURVE('',#116770,#119329,#119337,.T.); +#119337 = LINE('',#119338,#119339); +#119338 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#119339 = VECTOR('',#119340,1.); +#119340 = DIRECTION('',(0.,-0.,-1.)); +#119341 = ORIENTED_EDGE('',*,*,#116777,.F.); +#119342 = PLANE('',#119343); +#119343 = AXIS2_PLACEMENT_3D('',#119344,#119345,#119346); +#119344 = CARTESIAN_POINT('',(0.3,-10.46,8.2)); +#119345 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119346 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119347 = ADVANCED_FACE('',(#119348),#119398,.F.); +#119348 = FACE_BOUND('',#119349,.F.); +#119349 = EDGE_LOOP('',(#119350,#119351,#119352,#119360,#119368,#119376, + #119384,#119392)); +#119350 = ORIENTED_EDGE('',*,*,#116801,.F.); +#119351 = ORIENTED_EDGE('',*,*,#119336,.T.); +#119352 = ORIENTED_EDGE('',*,*,#119353,.T.); +#119353 = EDGE_CURVE('',#119329,#119354,#119356,.T.); +#119354 = VERTEX_POINT('',#119355); +#119355 = CARTESIAN_POINT('',(0.1,-9.86,0.9)); +#119356 = LINE('',#119357,#119358); +#119357 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#119358 = VECTOR('',#119359,1.); +#119359 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119360 = ORIENTED_EDGE('',*,*,#119361,.T.); +#119361 = EDGE_CURVE('',#119354,#119362,#119364,.T.); +#119362 = VERTEX_POINT('',#119363); +#119363 = CARTESIAN_POINT('',(0.1,-9.86,7.4)); +#119364 = LINE('',#119365,#119366); +#119365 = CARTESIAN_POINT('',(0.1,-9.86,6.055738799212)); +#119366 = VECTOR('',#119367,1.); +#119367 = DIRECTION('',(0.,-0.,1.)); +#119368 = ORIENTED_EDGE('',*,*,#119369,.F.); +#119369 = EDGE_CURVE('',#119370,#119362,#119372,.T.); +#119370 = VERTEX_POINT('',#119371); +#119371 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#119372 = LINE('',#119373,#119374); +#119373 = CARTESIAN_POINT('',(-0.1,-9.86,7.4)); +#119374 = VECTOR('',#119375,1.); +#119375 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119376 = ORIENTED_EDGE('',*,*,#119377,.F.); +#119377 = EDGE_CURVE('',#119378,#119370,#119380,.T.); +#119378 = VERTEX_POINT('',#119379); +#119379 = CARTESIAN_POINT('',(-0.1,-9.86,0.9)); +#119380 = LINE('',#119381,#119382); +#119381 = CARTESIAN_POINT('',(-0.1,-9.86,6.055738799212)); +#119382 = VECTOR('',#119383,1.); +#119383 = DIRECTION('',(0.,-0.,1.)); +#119384 = ORIENTED_EDGE('',*,*,#119385,.T.); +#119385 = EDGE_CURVE('',#119378,#119386,#119388,.T.); +#119386 = VERTEX_POINT('',#119387); +#119387 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#119388 = LINE('',#119389,#119390); +#119389 = CARTESIAN_POINT('',(0.3,-9.86,0.9)); +#119390 = VECTOR('',#119391,1.); +#119391 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119392 = ORIENTED_EDGE('',*,*,#119393,.F.); +#119393 = EDGE_CURVE('',#116794,#119386,#119394,.T.); +#119394 = LINE('',#119395,#119396); +#119395 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#119396 = VECTOR('',#119397,1.); +#119397 = DIRECTION('',(0.,-0.,-1.)); +#119398 = PLANE('',#119399); +#119399 = AXIS2_PLACEMENT_3D('',#119400,#119401,#119402); +#119400 = CARTESIAN_POINT('',(0.3,-9.86,8.2)); +#119401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119402 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119403 = ADVANCED_FACE('',(#119404),#119422,.F.); +#119404 = FACE_BOUND('',#119405,.F.); +#119405 = EDGE_LOOP('',(#119406,#119407,#119415,#119421)); +#119406 = ORIENTED_EDGE('',*,*,#119393,.T.); +#119407 = ORIENTED_EDGE('',*,*,#119408,.T.); +#119408 = EDGE_CURVE('',#119386,#119409,#119411,.T.); +#119409 = VERTEX_POINT('',#119410); +#119410 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#119411 = LINE('',#119412,#119413); +#119412 = CARTESIAN_POINT('',(-0.3,-9.86,0.9)); +#119413 = VECTOR('',#119414,1.); +#119414 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119415 = ORIENTED_EDGE('',*,*,#119416,.F.); +#119416 = EDGE_CURVE('',#116818,#119409,#119417,.T.); +#119417 = LINE('',#119418,#119419); +#119418 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#119419 = VECTOR('',#119420,1.); +#119420 = DIRECTION('',(0.,-0.,-1.)); +#119421 = ORIENTED_EDGE('',*,*,#116825,.F.); +#119422 = PLANE('',#119423); +#119423 = AXIS2_PLACEMENT_3D('',#119424,#119425,#119426); +#119424 = CARTESIAN_POINT('',(-0.3,-9.86,8.2)); +#119425 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119426 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119427 = ADVANCED_FACE('',(#119428),#119471,.F.); +#119428 = FACE_BOUND('',#119429,.F.); +#119429 = EDGE_LOOP('',(#119430,#119431,#119432,#119440,#119448,#119456, + #119464,#119470)); +#119430 = ORIENTED_EDGE('',*,*,#116842,.F.); +#119431 = ORIENTED_EDGE('',*,*,#119416,.T.); +#119432 = ORIENTED_EDGE('',*,*,#119433,.T.); +#119433 = EDGE_CURVE('',#119409,#119434,#119436,.T.); +#119434 = VERTEX_POINT('',#119435); +#119435 = CARTESIAN_POINT('',(-0.1,-10.46,0.9)); +#119436 = LINE('',#119437,#119438); +#119437 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#119438 = VECTOR('',#119439,1.); +#119439 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119440 = ORIENTED_EDGE('',*,*,#119441,.F.); +#119441 = EDGE_CURVE('',#119442,#119434,#119444,.T.); +#119442 = VERTEX_POINT('',#119443); +#119443 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#119444 = LINE('',#119445,#119446); +#119445 = CARTESIAN_POINT('',(-0.1,-10.46,6.055738799212)); +#119446 = VECTOR('',#119447,1.); +#119447 = DIRECTION('',(-0.,0.,-1.)); +#119448 = ORIENTED_EDGE('',*,*,#119449,.T.); +#119449 = EDGE_CURVE('',#119442,#119450,#119452,.T.); +#119450 = VERTEX_POINT('',#119451); +#119451 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#119452 = LINE('',#119453,#119454); +#119453 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#119454 = VECTOR('',#119455,1.); +#119455 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119456 = ORIENTED_EDGE('',*,*,#119457,.T.); +#119457 = EDGE_CURVE('',#119450,#119458,#119460,.T.); +#119458 = VERTEX_POINT('',#119459); +#119459 = CARTESIAN_POINT('',(0.1,-10.46,0.9)); +#119460 = LINE('',#119461,#119462); +#119461 = CARTESIAN_POINT('',(0.1,-10.46,6.055738799212)); +#119462 = VECTOR('',#119463,1.); +#119463 = DIRECTION('',(-0.,0.,-1.)); +#119464 = ORIENTED_EDGE('',*,*,#119465,.T.); +#119465 = EDGE_CURVE('',#119458,#119321,#119466,.T.); +#119466 = LINE('',#119467,#119468); +#119467 = CARTESIAN_POINT('',(-0.3,-10.46,0.9)); +#119468 = VECTOR('',#119469,1.); +#119469 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119470 = ORIENTED_EDGE('',*,*,#119320,.F.); +#119471 = PLANE('',#119472); +#119472 = AXIS2_PLACEMENT_3D('',#119473,#119474,#119475); +#119473 = CARTESIAN_POINT('',(-0.3,-10.46,8.2)); +#119474 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119475 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119476 = ADVANCED_FACE('',(#119477),#119502,.F.); +#119477 = FACE_BOUND('',#119478,.F.); +#119478 = EDGE_LOOP('',(#119479,#119487,#119495,#119501)); +#119479 = ORIENTED_EDGE('',*,*,#119480,.T.); +#119480 = EDGE_CURVE('',#116857,#119481,#119483,.T.); +#119481 = VERTEX_POINT('',#119482); +#119482 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#119483 = LINE('',#119484,#119485); +#119484 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#119485 = VECTOR('',#119486,1.); +#119486 = DIRECTION('',(0.,-0.,-1.)); +#119487 = ORIENTED_EDGE('',*,*,#119488,.T.); +#119488 = EDGE_CURVE('',#119481,#119489,#119491,.T.); +#119489 = VERTEX_POINT('',#119490); +#119490 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#119491 = LINE('',#119492,#119493); +#119492 = CARTESIAN_POINT('',(0.3,-7.92,0.9)); +#119493 = VECTOR('',#119494,1.); +#119494 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119495 = ORIENTED_EDGE('',*,*,#119496,.F.); +#119496 = EDGE_CURVE('',#116866,#119489,#119497,.T.); +#119497 = LINE('',#119498,#119499); +#119498 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#119499 = VECTOR('',#119500,1.); +#119500 = DIRECTION('',(0.,-0.,-1.)); +#119501 = ORIENTED_EDGE('',*,*,#116873,.F.); +#119502 = PLANE('',#119503); +#119503 = AXIS2_PLACEMENT_3D('',#119504,#119505,#119506); +#119504 = CARTESIAN_POINT('',(0.3,-7.92,8.2)); +#119505 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119506 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119507 = ADVANCED_FACE('',(#119508),#119558,.F.); +#119508 = FACE_BOUND('',#119509,.F.); +#119509 = EDGE_LOOP('',(#119510,#119511,#119512,#119520,#119528,#119536, + #119544,#119552)); +#119510 = ORIENTED_EDGE('',*,*,#116897,.F.); +#119511 = ORIENTED_EDGE('',*,*,#119496,.T.); +#119512 = ORIENTED_EDGE('',*,*,#119513,.T.); +#119513 = EDGE_CURVE('',#119489,#119514,#119516,.T.); +#119514 = VERTEX_POINT('',#119515); +#119515 = CARTESIAN_POINT('',(0.1,-7.32,0.9)); +#119516 = LINE('',#119517,#119518); +#119517 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#119518 = VECTOR('',#119519,1.); +#119519 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119520 = ORIENTED_EDGE('',*,*,#119521,.T.); +#119521 = EDGE_CURVE('',#119514,#119522,#119524,.T.); +#119522 = VERTEX_POINT('',#119523); +#119523 = CARTESIAN_POINT('',(0.1,-7.32,7.4)); +#119524 = LINE('',#119525,#119526); +#119525 = CARTESIAN_POINT('',(0.1,-7.32,6.055738799212)); +#119526 = VECTOR('',#119527,1.); +#119527 = DIRECTION('',(0.,-0.,1.)); +#119528 = ORIENTED_EDGE('',*,*,#119529,.F.); +#119529 = EDGE_CURVE('',#119530,#119522,#119532,.T.); +#119530 = VERTEX_POINT('',#119531); +#119531 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#119532 = LINE('',#119533,#119534); +#119533 = CARTESIAN_POINT('',(-0.1,-7.32,7.4)); +#119534 = VECTOR('',#119535,1.); +#119535 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119536 = ORIENTED_EDGE('',*,*,#119537,.F.); +#119537 = EDGE_CURVE('',#119538,#119530,#119540,.T.); +#119538 = VERTEX_POINT('',#119539); +#119539 = CARTESIAN_POINT('',(-0.1,-7.32,0.9)); +#119540 = LINE('',#119541,#119542); +#119541 = CARTESIAN_POINT('',(-0.1,-7.32,6.055738799212)); +#119542 = VECTOR('',#119543,1.); +#119543 = DIRECTION('',(0.,-0.,1.)); +#119544 = ORIENTED_EDGE('',*,*,#119545,.T.); +#119545 = EDGE_CURVE('',#119538,#119546,#119548,.T.); +#119546 = VERTEX_POINT('',#119547); +#119547 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#119548 = LINE('',#119549,#119550); +#119549 = CARTESIAN_POINT('',(0.3,-7.32,0.9)); +#119550 = VECTOR('',#119551,1.); +#119551 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119552 = ORIENTED_EDGE('',*,*,#119553,.F.); +#119553 = EDGE_CURVE('',#116890,#119546,#119554,.T.); +#119554 = LINE('',#119555,#119556); +#119555 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#119556 = VECTOR('',#119557,1.); +#119557 = DIRECTION('',(0.,-0.,-1.)); +#119558 = PLANE('',#119559); +#119559 = AXIS2_PLACEMENT_3D('',#119560,#119561,#119562); +#119560 = CARTESIAN_POINT('',(0.3,-7.32,8.2)); +#119561 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119562 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119563 = ADVANCED_FACE('',(#119564),#119582,.F.); +#119564 = FACE_BOUND('',#119565,.F.); +#119565 = EDGE_LOOP('',(#119566,#119567,#119575,#119581)); +#119566 = ORIENTED_EDGE('',*,*,#119553,.T.); +#119567 = ORIENTED_EDGE('',*,*,#119568,.T.); +#119568 = EDGE_CURVE('',#119546,#119569,#119571,.T.); +#119569 = VERTEX_POINT('',#119570); +#119570 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#119571 = LINE('',#119572,#119573); +#119572 = CARTESIAN_POINT('',(-0.3,-7.32,0.9)); +#119573 = VECTOR('',#119574,1.); +#119574 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119575 = ORIENTED_EDGE('',*,*,#119576,.F.); +#119576 = EDGE_CURVE('',#116914,#119569,#119577,.T.); +#119577 = LINE('',#119578,#119579); +#119578 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#119579 = VECTOR('',#119580,1.); +#119580 = DIRECTION('',(0.,-0.,-1.)); +#119581 = ORIENTED_EDGE('',*,*,#116921,.F.); +#119582 = PLANE('',#119583); +#119583 = AXIS2_PLACEMENT_3D('',#119584,#119585,#119586); +#119584 = CARTESIAN_POINT('',(-0.3,-7.32,8.2)); +#119585 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119586 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119587 = ADVANCED_FACE('',(#119588),#119631,.F.); +#119588 = FACE_BOUND('',#119589,.F.); +#119589 = EDGE_LOOP('',(#119590,#119591,#119592,#119600,#119608,#119616, + #119624,#119630)); +#119590 = ORIENTED_EDGE('',*,*,#116938,.F.); +#119591 = ORIENTED_EDGE('',*,*,#119576,.T.); +#119592 = ORIENTED_EDGE('',*,*,#119593,.T.); +#119593 = EDGE_CURVE('',#119569,#119594,#119596,.T.); +#119594 = VERTEX_POINT('',#119595); +#119595 = CARTESIAN_POINT('',(-0.1,-7.92,0.9)); +#119596 = LINE('',#119597,#119598); +#119597 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#119598 = VECTOR('',#119599,1.); +#119599 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119600 = ORIENTED_EDGE('',*,*,#119601,.F.); +#119601 = EDGE_CURVE('',#119602,#119594,#119604,.T.); +#119602 = VERTEX_POINT('',#119603); +#119603 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#119604 = LINE('',#119605,#119606); +#119605 = CARTESIAN_POINT('',(-0.1,-7.92,6.055738799212)); +#119606 = VECTOR('',#119607,1.); +#119607 = DIRECTION('',(-0.,0.,-1.)); +#119608 = ORIENTED_EDGE('',*,*,#119609,.T.); +#119609 = EDGE_CURVE('',#119602,#119610,#119612,.T.); +#119610 = VERTEX_POINT('',#119611); +#119611 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#119612 = LINE('',#119613,#119614); +#119613 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#119614 = VECTOR('',#119615,1.); +#119615 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119616 = ORIENTED_EDGE('',*,*,#119617,.T.); +#119617 = EDGE_CURVE('',#119610,#119618,#119620,.T.); +#119618 = VERTEX_POINT('',#119619); +#119619 = CARTESIAN_POINT('',(0.1,-7.92,0.9)); +#119620 = LINE('',#119621,#119622); +#119621 = CARTESIAN_POINT('',(0.1,-7.92,6.055738799212)); +#119622 = VECTOR('',#119623,1.); +#119623 = DIRECTION('',(-0.,0.,-1.)); +#119624 = ORIENTED_EDGE('',*,*,#119625,.T.); +#119625 = EDGE_CURVE('',#119618,#119481,#119626,.T.); +#119626 = LINE('',#119627,#119628); +#119627 = CARTESIAN_POINT('',(-0.3,-7.92,0.9)); +#119628 = VECTOR('',#119629,1.); +#119629 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119630 = ORIENTED_EDGE('',*,*,#119480,.F.); +#119631 = PLANE('',#119632); +#119632 = AXIS2_PLACEMENT_3D('',#119633,#119634,#119635); +#119633 = CARTESIAN_POINT('',(-0.3,-7.92,8.2)); +#119634 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119635 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119636 = ADVANCED_FACE('',(#119637),#119662,.F.); +#119637 = FACE_BOUND('',#119638,.F.); +#119638 = EDGE_LOOP('',(#119639,#119647,#119655,#119661)); +#119639 = ORIENTED_EDGE('',*,*,#119640,.T.); +#119640 = EDGE_CURVE('',#116953,#119641,#119643,.T.); +#119641 = VERTEX_POINT('',#119642); +#119642 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#119643 = LINE('',#119644,#119645); +#119644 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#119645 = VECTOR('',#119646,1.); +#119646 = DIRECTION('',(0.,-0.,-1.)); +#119647 = ORIENTED_EDGE('',*,*,#119648,.T.); +#119648 = EDGE_CURVE('',#119641,#119649,#119651,.T.); +#119649 = VERTEX_POINT('',#119650); +#119650 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#119651 = LINE('',#119652,#119653); +#119652 = CARTESIAN_POINT('',(0.3,-5.38,0.9)); +#119653 = VECTOR('',#119654,1.); +#119654 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119655 = ORIENTED_EDGE('',*,*,#119656,.F.); +#119656 = EDGE_CURVE('',#116962,#119649,#119657,.T.); +#119657 = LINE('',#119658,#119659); +#119658 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#119659 = VECTOR('',#119660,1.); +#119660 = DIRECTION('',(0.,-0.,-1.)); +#119661 = ORIENTED_EDGE('',*,*,#116969,.F.); +#119662 = PLANE('',#119663); +#119663 = AXIS2_PLACEMENT_3D('',#119664,#119665,#119666); +#119664 = CARTESIAN_POINT('',(0.3,-5.38,8.2)); +#119665 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119667 = ADVANCED_FACE('',(#119668),#119718,.F.); +#119668 = FACE_BOUND('',#119669,.F.); +#119669 = EDGE_LOOP('',(#119670,#119671,#119672,#119680,#119688,#119696, + #119704,#119712)); +#119670 = ORIENTED_EDGE('',*,*,#116993,.F.); +#119671 = ORIENTED_EDGE('',*,*,#119656,.T.); +#119672 = ORIENTED_EDGE('',*,*,#119673,.T.); +#119673 = EDGE_CURVE('',#119649,#119674,#119676,.T.); +#119674 = VERTEX_POINT('',#119675); +#119675 = CARTESIAN_POINT('',(0.1,-4.78,0.9)); +#119676 = LINE('',#119677,#119678); +#119677 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#119678 = VECTOR('',#119679,1.); +#119679 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119680 = ORIENTED_EDGE('',*,*,#119681,.T.); +#119681 = EDGE_CURVE('',#119674,#119682,#119684,.T.); +#119682 = VERTEX_POINT('',#119683); +#119683 = CARTESIAN_POINT('',(0.1,-4.78,7.4)); +#119684 = LINE('',#119685,#119686); +#119685 = CARTESIAN_POINT('',(0.1,-4.78,6.055738799212)); +#119686 = VECTOR('',#119687,1.); +#119687 = DIRECTION('',(0.,-0.,1.)); +#119688 = ORIENTED_EDGE('',*,*,#119689,.F.); +#119689 = EDGE_CURVE('',#119690,#119682,#119692,.T.); +#119690 = VERTEX_POINT('',#119691); +#119691 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#119692 = LINE('',#119693,#119694); +#119693 = CARTESIAN_POINT('',(-0.1,-4.78,7.4)); +#119694 = VECTOR('',#119695,1.); +#119695 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119696 = ORIENTED_EDGE('',*,*,#119697,.F.); +#119697 = EDGE_CURVE('',#119698,#119690,#119700,.T.); +#119698 = VERTEX_POINT('',#119699); +#119699 = CARTESIAN_POINT('',(-0.1,-4.78,0.9)); +#119700 = LINE('',#119701,#119702); +#119701 = CARTESIAN_POINT('',(-0.1,-4.78,6.055738799212)); +#119702 = VECTOR('',#119703,1.); +#119703 = DIRECTION('',(0.,-0.,1.)); +#119704 = ORIENTED_EDGE('',*,*,#119705,.T.); +#119705 = EDGE_CURVE('',#119698,#119706,#119708,.T.); +#119706 = VERTEX_POINT('',#119707); +#119707 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#119708 = LINE('',#119709,#119710); +#119709 = CARTESIAN_POINT('',(0.3,-4.78,0.9)); +#119710 = VECTOR('',#119711,1.); +#119711 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119712 = ORIENTED_EDGE('',*,*,#119713,.F.); +#119713 = EDGE_CURVE('',#116986,#119706,#119714,.T.); +#119714 = LINE('',#119715,#119716); +#119715 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#119716 = VECTOR('',#119717,1.); +#119717 = DIRECTION('',(0.,-0.,-1.)); +#119718 = PLANE('',#119719); +#119719 = AXIS2_PLACEMENT_3D('',#119720,#119721,#119722); +#119720 = CARTESIAN_POINT('',(0.3,-4.78,8.2)); +#119721 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119722 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119723 = ADVANCED_FACE('',(#119724),#119742,.F.); +#119724 = FACE_BOUND('',#119725,.F.); +#119725 = EDGE_LOOP('',(#119726,#119727,#119735,#119741)); +#119726 = ORIENTED_EDGE('',*,*,#119713,.T.); +#119727 = ORIENTED_EDGE('',*,*,#119728,.T.); +#119728 = EDGE_CURVE('',#119706,#119729,#119731,.T.); +#119729 = VERTEX_POINT('',#119730); +#119730 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#119731 = LINE('',#119732,#119733); +#119732 = CARTESIAN_POINT('',(-0.3,-4.78,0.9)); +#119733 = VECTOR('',#119734,1.); +#119734 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119735 = ORIENTED_EDGE('',*,*,#119736,.F.); +#119736 = EDGE_CURVE('',#117010,#119729,#119737,.T.); +#119737 = LINE('',#119738,#119739); +#119738 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#119739 = VECTOR('',#119740,1.); +#119740 = DIRECTION('',(0.,-0.,-1.)); +#119741 = ORIENTED_EDGE('',*,*,#117017,.F.); +#119742 = PLANE('',#119743); +#119743 = AXIS2_PLACEMENT_3D('',#119744,#119745,#119746); +#119744 = CARTESIAN_POINT('',(-0.3,-4.78,8.2)); +#119745 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119747 = ADVANCED_FACE('',(#119748),#119791,.F.); +#119748 = FACE_BOUND('',#119749,.F.); +#119749 = EDGE_LOOP('',(#119750,#119751,#119752,#119760,#119768,#119776, + #119784,#119790)); +#119750 = ORIENTED_EDGE('',*,*,#117034,.F.); +#119751 = ORIENTED_EDGE('',*,*,#119736,.T.); +#119752 = ORIENTED_EDGE('',*,*,#119753,.T.); +#119753 = EDGE_CURVE('',#119729,#119754,#119756,.T.); +#119754 = VERTEX_POINT('',#119755); +#119755 = CARTESIAN_POINT('',(-0.1,-5.38,0.9)); +#119756 = LINE('',#119757,#119758); +#119757 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#119758 = VECTOR('',#119759,1.); +#119759 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119760 = ORIENTED_EDGE('',*,*,#119761,.F.); +#119761 = EDGE_CURVE('',#119762,#119754,#119764,.T.); +#119762 = VERTEX_POINT('',#119763); +#119763 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#119764 = LINE('',#119765,#119766); +#119765 = CARTESIAN_POINT('',(-0.1,-5.38,6.055738799212)); +#119766 = VECTOR('',#119767,1.); +#119767 = DIRECTION('',(-0.,0.,-1.)); +#119768 = ORIENTED_EDGE('',*,*,#119769,.T.); +#119769 = EDGE_CURVE('',#119762,#119770,#119772,.T.); +#119770 = VERTEX_POINT('',#119771); +#119771 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#119772 = LINE('',#119773,#119774); +#119773 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#119774 = VECTOR('',#119775,1.); +#119775 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119776 = ORIENTED_EDGE('',*,*,#119777,.T.); +#119777 = EDGE_CURVE('',#119770,#119778,#119780,.T.); +#119778 = VERTEX_POINT('',#119779); +#119779 = CARTESIAN_POINT('',(0.1,-5.38,0.9)); +#119780 = LINE('',#119781,#119782); +#119781 = CARTESIAN_POINT('',(0.1,-5.38,6.055738799212)); +#119782 = VECTOR('',#119783,1.); +#119783 = DIRECTION('',(-0.,0.,-1.)); +#119784 = ORIENTED_EDGE('',*,*,#119785,.T.); +#119785 = EDGE_CURVE('',#119778,#119641,#119786,.T.); +#119786 = LINE('',#119787,#119788); +#119787 = CARTESIAN_POINT('',(-0.3,-5.38,0.9)); +#119788 = VECTOR('',#119789,1.); +#119789 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119790 = ORIENTED_EDGE('',*,*,#119640,.F.); +#119791 = PLANE('',#119792); +#119792 = AXIS2_PLACEMENT_3D('',#119793,#119794,#119795); +#119793 = CARTESIAN_POINT('',(-0.3,-5.38,8.2)); +#119794 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119795 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119796 = ADVANCED_FACE('',(#119797),#119822,.F.); +#119797 = FACE_BOUND('',#119798,.F.); +#119798 = EDGE_LOOP('',(#119799,#119807,#119815,#119821)); +#119799 = ORIENTED_EDGE('',*,*,#119800,.T.); +#119800 = EDGE_CURVE('',#117049,#119801,#119803,.T.); +#119801 = VERTEX_POINT('',#119802); +#119802 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#119803 = LINE('',#119804,#119805); +#119804 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#119805 = VECTOR('',#119806,1.); +#119806 = DIRECTION('',(0.,-0.,-1.)); +#119807 = ORIENTED_EDGE('',*,*,#119808,.T.); +#119808 = EDGE_CURVE('',#119801,#119809,#119811,.T.); +#119809 = VERTEX_POINT('',#119810); +#119810 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#119811 = LINE('',#119812,#119813); +#119812 = CARTESIAN_POINT('',(0.3,-2.84,0.9)); +#119813 = VECTOR('',#119814,1.); +#119814 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119815 = ORIENTED_EDGE('',*,*,#119816,.F.); +#119816 = EDGE_CURVE('',#117058,#119809,#119817,.T.); +#119817 = LINE('',#119818,#119819); +#119818 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#119819 = VECTOR('',#119820,1.); +#119820 = DIRECTION('',(0.,-0.,-1.)); +#119821 = ORIENTED_EDGE('',*,*,#117065,.F.); +#119822 = PLANE('',#119823); +#119823 = AXIS2_PLACEMENT_3D('',#119824,#119825,#119826); +#119824 = CARTESIAN_POINT('',(0.3,-2.84,8.2)); +#119825 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119826 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119827 = ADVANCED_FACE('',(#119828),#119878,.F.); +#119828 = FACE_BOUND('',#119829,.F.); +#119829 = EDGE_LOOP('',(#119830,#119831,#119832,#119840,#119848,#119856, + #119864,#119872)); +#119830 = ORIENTED_EDGE('',*,*,#117089,.F.); +#119831 = ORIENTED_EDGE('',*,*,#119816,.T.); +#119832 = ORIENTED_EDGE('',*,*,#119833,.T.); +#119833 = EDGE_CURVE('',#119809,#119834,#119836,.T.); +#119834 = VERTEX_POINT('',#119835); +#119835 = CARTESIAN_POINT('',(0.1,-2.24,0.9)); +#119836 = LINE('',#119837,#119838); +#119837 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#119838 = VECTOR('',#119839,1.); +#119839 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119840 = ORIENTED_EDGE('',*,*,#119841,.T.); +#119841 = EDGE_CURVE('',#119834,#119842,#119844,.T.); +#119842 = VERTEX_POINT('',#119843); +#119843 = CARTESIAN_POINT('',(0.1,-2.24,7.4)); +#119844 = LINE('',#119845,#119846); +#119845 = CARTESIAN_POINT('',(0.1,-2.24,6.055738799212)); +#119846 = VECTOR('',#119847,1.); +#119847 = DIRECTION('',(0.,-0.,1.)); +#119848 = ORIENTED_EDGE('',*,*,#119849,.F.); +#119849 = EDGE_CURVE('',#119850,#119842,#119852,.T.); +#119850 = VERTEX_POINT('',#119851); +#119851 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#119852 = LINE('',#119853,#119854); +#119853 = CARTESIAN_POINT('',(-0.1,-2.24,7.4)); +#119854 = VECTOR('',#119855,1.); +#119855 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119856 = ORIENTED_EDGE('',*,*,#119857,.F.); +#119857 = EDGE_CURVE('',#119858,#119850,#119860,.T.); +#119858 = VERTEX_POINT('',#119859); +#119859 = CARTESIAN_POINT('',(-0.1,-2.24,0.9)); +#119860 = LINE('',#119861,#119862); +#119861 = CARTESIAN_POINT('',(-0.1,-2.24,6.055738799212)); +#119862 = VECTOR('',#119863,1.); +#119863 = DIRECTION('',(0.,-0.,1.)); +#119864 = ORIENTED_EDGE('',*,*,#119865,.T.); +#119865 = EDGE_CURVE('',#119858,#119866,#119868,.T.); +#119866 = VERTEX_POINT('',#119867); +#119867 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#119868 = LINE('',#119869,#119870); +#119869 = CARTESIAN_POINT('',(0.3,-2.24,0.9)); +#119870 = VECTOR('',#119871,1.); +#119871 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119872 = ORIENTED_EDGE('',*,*,#119873,.F.); +#119873 = EDGE_CURVE('',#117082,#119866,#119874,.T.); +#119874 = LINE('',#119875,#119876); +#119875 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#119876 = VECTOR('',#119877,1.); +#119877 = DIRECTION('',(0.,-0.,-1.)); +#119878 = PLANE('',#119879); +#119879 = AXIS2_PLACEMENT_3D('',#119880,#119881,#119882); +#119880 = CARTESIAN_POINT('',(0.3,-2.24,8.2)); +#119881 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119882 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119883 = ADVANCED_FACE('',(#119884),#119902,.F.); +#119884 = FACE_BOUND('',#119885,.F.); +#119885 = EDGE_LOOP('',(#119886,#119887,#119895,#119901)); +#119886 = ORIENTED_EDGE('',*,*,#119873,.T.); +#119887 = ORIENTED_EDGE('',*,*,#119888,.T.); +#119888 = EDGE_CURVE('',#119866,#119889,#119891,.T.); +#119889 = VERTEX_POINT('',#119890); +#119890 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#119891 = LINE('',#119892,#119893); +#119892 = CARTESIAN_POINT('',(-0.3,-2.24,0.9)); +#119893 = VECTOR('',#119894,1.); +#119894 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119895 = ORIENTED_EDGE('',*,*,#119896,.F.); +#119896 = EDGE_CURVE('',#117106,#119889,#119897,.T.); +#119897 = LINE('',#119898,#119899); +#119898 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#119899 = VECTOR('',#119900,1.); +#119900 = DIRECTION('',(0.,-0.,-1.)); +#119901 = ORIENTED_EDGE('',*,*,#117113,.F.); +#119902 = PLANE('',#119903); +#119903 = AXIS2_PLACEMENT_3D('',#119904,#119905,#119906); +#119904 = CARTESIAN_POINT('',(-0.3,-2.24,8.2)); +#119905 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#119906 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119907 = ADVANCED_FACE('',(#119908),#119951,.F.); +#119908 = FACE_BOUND('',#119909,.F.); +#119909 = EDGE_LOOP('',(#119910,#119911,#119912,#119920,#119928,#119936, + #119944,#119950)); +#119910 = ORIENTED_EDGE('',*,*,#117130,.F.); +#119911 = ORIENTED_EDGE('',*,*,#119896,.T.); +#119912 = ORIENTED_EDGE('',*,*,#119913,.T.); +#119913 = EDGE_CURVE('',#119889,#119914,#119916,.T.); +#119914 = VERTEX_POINT('',#119915); +#119915 = CARTESIAN_POINT('',(-0.1,-2.84,0.9)); +#119916 = LINE('',#119917,#119918); +#119917 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#119918 = VECTOR('',#119919,1.); +#119919 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119920 = ORIENTED_EDGE('',*,*,#119921,.F.); +#119921 = EDGE_CURVE('',#119922,#119914,#119924,.T.); +#119922 = VERTEX_POINT('',#119923); +#119923 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#119924 = LINE('',#119925,#119926); +#119925 = CARTESIAN_POINT('',(-0.1,-2.84,6.055738799212)); +#119926 = VECTOR('',#119927,1.); +#119927 = DIRECTION('',(-0.,0.,-1.)); +#119928 = ORIENTED_EDGE('',*,*,#119929,.T.); +#119929 = EDGE_CURVE('',#119922,#119930,#119932,.T.); +#119930 = VERTEX_POINT('',#119931); +#119931 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#119932 = LINE('',#119933,#119934); +#119933 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#119934 = VECTOR('',#119935,1.); +#119935 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119936 = ORIENTED_EDGE('',*,*,#119937,.T.); +#119937 = EDGE_CURVE('',#119930,#119938,#119940,.T.); +#119938 = VERTEX_POINT('',#119939); +#119939 = CARTESIAN_POINT('',(0.1,-2.84,0.9)); +#119940 = LINE('',#119941,#119942); +#119941 = CARTESIAN_POINT('',(0.1,-2.84,6.055738799212)); +#119942 = VECTOR('',#119943,1.); +#119943 = DIRECTION('',(-0.,0.,-1.)); +#119944 = ORIENTED_EDGE('',*,*,#119945,.T.); +#119945 = EDGE_CURVE('',#119938,#119801,#119946,.T.); +#119946 = LINE('',#119947,#119948); +#119947 = CARTESIAN_POINT('',(-0.3,-2.84,0.9)); +#119948 = VECTOR('',#119949,1.); +#119949 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119950 = ORIENTED_EDGE('',*,*,#119800,.F.); +#119951 = PLANE('',#119952); +#119952 = AXIS2_PLACEMENT_3D('',#119953,#119954,#119955); +#119953 = CARTESIAN_POINT('',(-0.3,-2.84,8.2)); +#119954 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#119955 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119956 = ADVANCED_FACE('',(#119957),#119982,.F.); +#119957 = FACE_BOUND('',#119958,.F.); +#119958 = EDGE_LOOP('',(#119959,#119967,#119975,#119981)); +#119959 = ORIENTED_EDGE('',*,*,#119960,.T.); +#119960 = EDGE_CURVE('',#117145,#119961,#119963,.T.); +#119961 = VERTEX_POINT('',#119962); +#119962 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#119963 = LINE('',#119964,#119965); +#119964 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#119965 = VECTOR('',#119966,1.); +#119966 = DIRECTION('',(0.,-0.,-1.)); +#119967 = ORIENTED_EDGE('',*,*,#119968,.T.); +#119968 = EDGE_CURVE('',#119961,#119969,#119971,.T.); +#119969 = VERTEX_POINT('',#119970); +#119970 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#119971 = LINE('',#119972,#119973); +#119972 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#119973 = VECTOR('',#119974,1.); +#119974 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119975 = ORIENTED_EDGE('',*,*,#119976,.F.); +#119976 = EDGE_CURVE('',#117154,#119969,#119977,.T.); +#119977 = LINE('',#119978,#119979); +#119978 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#119979 = VECTOR('',#119980,1.); +#119980 = DIRECTION('',(0.,-0.,-1.)); +#119981 = ORIENTED_EDGE('',*,*,#117161,.F.); +#119982 = PLANE('',#119983); +#119983 = AXIS2_PLACEMENT_3D('',#119984,#119985,#119986); +#119984 = CARTESIAN_POINT('',(0.3,-0.3,8.2)); +#119985 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#119986 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119987 = ADVANCED_FACE('',(#119988),#120038,.F.); +#119988 = FACE_BOUND('',#119989,.F.); +#119989 = EDGE_LOOP('',(#119990,#119991,#119992,#120000,#120008,#120016, + #120024,#120032)); +#119990 = ORIENTED_EDGE('',*,*,#117185,.F.); +#119991 = ORIENTED_EDGE('',*,*,#119976,.T.); +#119992 = ORIENTED_EDGE('',*,*,#119993,.T.); +#119993 = EDGE_CURVE('',#119969,#119994,#119996,.T.); +#119994 = VERTEX_POINT('',#119995); +#119995 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#119996 = LINE('',#119997,#119998); +#119997 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#119998 = VECTOR('',#119999,1.); +#119999 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120000 = ORIENTED_EDGE('',*,*,#120001,.T.); +#120001 = EDGE_CURVE('',#119994,#120002,#120004,.T.); +#120002 = VERTEX_POINT('',#120003); +#120003 = CARTESIAN_POINT('',(0.1,0.3,7.4)); +#120004 = LINE('',#120005,#120006); +#120005 = CARTESIAN_POINT('',(0.1,0.3,6.055738799212)); +#120006 = VECTOR('',#120007,1.); +#120007 = DIRECTION('',(0.,-0.,1.)); +#120008 = ORIENTED_EDGE('',*,*,#120009,.F.); +#120009 = EDGE_CURVE('',#120010,#120002,#120012,.T.); +#120010 = VERTEX_POINT('',#120011); +#120011 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#120012 = LINE('',#120013,#120014); +#120013 = CARTESIAN_POINT('',(-0.1,0.3,7.4)); +#120014 = VECTOR('',#120015,1.); +#120015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120016 = ORIENTED_EDGE('',*,*,#120017,.F.); +#120017 = EDGE_CURVE('',#120018,#120010,#120020,.T.); +#120018 = VERTEX_POINT('',#120019); +#120019 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#120020 = LINE('',#120021,#120022); +#120021 = CARTESIAN_POINT('',(-0.1,0.3,6.055738799212)); +#120022 = VECTOR('',#120023,1.); +#120023 = DIRECTION('',(0.,-0.,1.)); +#120024 = ORIENTED_EDGE('',*,*,#120025,.T.); +#120025 = EDGE_CURVE('',#120018,#120026,#120028,.T.); +#120026 = VERTEX_POINT('',#120027); +#120027 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#120028 = LINE('',#120029,#120030); +#120029 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#120030 = VECTOR('',#120031,1.); +#120031 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120032 = ORIENTED_EDGE('',*,*,#120033,.F.); +#120033 = EDGE_CURVE('',#117178,#120026,#120034,.T.); +#120034 = LINE('',#120035,#120036); +#120035 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#120036 = VECTOR('',#120037,1.); +#120037 = DIRECTION('',(0.,-0.,-1.)); +#120038 = PLANE('',#120039); +#120039 = AXIS2_PLACEMENT_3D('',#120040,#120041,#120042); +#120040 = CARTESIAN_POINT('',(0.3,0.3,8.2)); +#120041 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120042 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120043 = ADVANCED_FACE('',(#120044),#120062,.F.); +#120044 = FACE_BOUND('',#120045,.F.); +#120045 = EDGE_LOOP('',(#120046,#120047,#120055,#120061)); +#120046 = ORIENTED_EDGE('',*,*,#120033,.T.); +#120047 = ORIENTED_EDGE('',*,*,#120048,.T.); +#120048 = EDGE_CURVE('',#120026,#120049,#120051,.T.); +#120049 = VERTEX_POINT('',#120050); +#120050 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#120051 = LINE('',#120052,#120053); +#120052 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#120053 = VECTOR('',#120054,1.); +#120054 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120055 = ORIENTED_EDGE('',*,*,#120056,.F.); +#120056 = EDGE_CURVE('',#117202,#120049,#120057,.T.); +#120057 = LINE('',#120058,#120059); +#120058 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#120059 = VECTOR('',#120060,1.); +#120060 = DIRECTION('',(0.,-0.,-1.)); +#120061 = ORIENTED_EDGE('',*,*,#117209,.F.); +#120062 = PLANE('',#120063); +#120063 = AXIS2_PLACEMENT_3D('',#120064,#120065,#120066); +#120064 = CARTESIAN_POINT('',(-0.3,0.3,8.2)); +#120065 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120066 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120067 = ADVANCED_FACE('',(#120068),#120111,.F.); +#120068 = FACE_BOUND('',#120069,.F.); +#120069 = EDGE_LOOP('',(#120070,#120071,#120072,#120080,#120088,#120096, + #120104,#120110)); +#120070 = ORIENTED_EDGE('',*,*,#117226,.F.); +#120071 = ORIENTED_EDGE('',*,*,#120056,.T.); +#120072 = ORIENTED_EDGE('',*,*,#120073,.T.); +#120073 = EDGE_CURVE('',#120049,#120074,#120076,.T.); +#120074 = VERTEX_POINT('',#120075); +#120075 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#120076 = LINE('',#120077,#120078); +#120077 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#120078 = VECTOR('',#120079,1.); +#120079 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120080 = ORIENTED_EDGE('',*,*,#120081,.F.); +#120081 = EDGE_CURVE('',#120082,#120074,#120084,.T.); +#120082 = VERTEX_POINT('',#120083); +#120083 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#120084 = LINE('',#120085,#120086); +#120085 = CARTESIAN_POINT('',(-0.1,-0.3,6.055738799212)); +#120086 = VECTOR('',#120087,1.); +#120087 = DIRECTION('',(-0.,0.,-1.)); +#120088 = ORIENTED_EDGE('',*,*,#120089,.T.); +#120089 = EDGE_CURVE('',#120082,#120090,#120092,.T.); +#120090 = VERTEX_POINT('',#120091); +#120091 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#120092 = LINE('',#120093,#120094); +#120093 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#120094 = VECTOR('',#120095,1.); +#120095 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120096 = ORIENTED_EDGE('',*,*,#120097,.T.); +#120097 = EDGE_CURVE('',#120090,#120098,#120100,.T.); +#120098 = VERTEX_POINT('',#120099); +#120099 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#120100 = LINE('',#120101,#120102); +#120101 = CARTESIAN_POINT('',(0.1,-0.3,6.055738799212)); +#120102 = VECTOR('',#120103,1.); +#120103 = DIRECTION('',(-0.,0.,-1.)); +#120104 = ORIENTED_EDGE('',*,*,#120105,.T.); +#120105 = EDGE_CURVE('',#120098,#119961,#120106,.T.); +#120106 = LINE('',#120107,#120108); +#120107 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#120108 = VECTOR('',#120109,1.); +#120109 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120110 = ORIENTED_EDGE('',*,*,#119960,.F.); +#120111 = PLANE('',#120112); +#120112 = AXIS2_PLACEMENT_3D('',#120113,#120114,#120115); +#120113 = CARTESIAN_POINT('',(-0.3,-0.3,8.2)); +#120114 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120115 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120116 = ADVANCED_FACE('',(#120117),#120128,.T.); +#120117 = FACE_BOUND('',#120118,.T.); +#120118 = EDGE_LOOP('',(#120119,#120125,#120126,#120127)); +#120119 = ORIENTED_EDGE('',*,*,#120120,.T.); +#120120 = EDGE_CURVE('',#117322,#117258,#120121,.T.); +#120121 = LINE('',#120122,#120123); +#120122 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#120123 = VECTOR('',#120124,1.); +#120124 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120125 = ORIENTED_EDGE('',*,*,#117257,.T.); +#120126 = ORIENTED_EDGE('',*,*,#117242,.F.); +#120127 = ORIENTED_EDGE('',*,*,#117321,.F.); +#120128 = PLANE('',#120129); +#120129 = AXIS2_PLACEMENT_3D('',#120130,#120131,#120132); +#120130 = CARTESIAN_POINT('',(-0.1,-23.16,-2.5)); +#120131 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120132 = DIRECTION('',(0.,0.,1.)); +#120133 = ADVANCED_FACE('',(#120134),#120145,.T.); +#120134 = FACE_BOUND('',#120135,.T.); +#120135 = EDGE_LOOP('',(#120136,#120142,#120143,#120144)); +#120136 = ORIENTED_EDGE('',*,*,#120137,.T.); +#120137 = EDGE_CURVE('',#117347,#117283,#120138,.T.); +#120138 = LINE('',#120139,#120140); +#120139 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#120140 = VECTOR('',#120141,1.); +#120141 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120142 = ORIENTED_EDGE('',*,*,#117290,.T.); +#120143 = ORIENTED_EDGE('',*,*,#120120,.F.); +#120144 = ORIENTED_EDGE('',*,*,#117354,.F.); +#120145 = PLANE('',#120146); +#120146 = AXIS2_PLACEMENT_3D('',#120147,#120148,#120149); +#120147 = CARTESIAN_POINT('',(-0.1,-23.01,-3.1)); +#120148 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120149 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120150 = ADVANCED_FACE('',(#120151),#120162,.T.); +#120151 = FACE_BOUND('',#120152,.T.); +#120152 = EDGE_LOOP('',(#120153,#120159,#120160,#120161)); +#120153 = ORIENTED_EDGE('',*,*,#120154,.T.); +#120154 = EDGE_CURVE('',#117339,#117275,#120155,.T.); +#120155 = LINE('',#120156,#120157); +#120156 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#120157 = VECTOR('',#120158,1.); +#120158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120159 = ORIENTED_EDGE('',*,*,#117282,.T.); +#120160 = ORIENTED_EDGE('',*,*,#120137,.F.); +#120161 = ORIENTED_EDGE('',*,*,#117346,.T.); +#120162 = PLANE('',#120163); +#120163 = AXIS2_PLACEMENT_3D('',#120164,#120165,#120166); +#120164 = CARTESIAN_POINT('',(-0.1,-22.71,-3.1)); +#120165 = DIRECTION('',(0.,-0.,-1.)); +#120166 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120167 = ADVANCED_FACE('',(#120168),#120179,.T.); +#120168 = FACE_BOUND('',#120169,.T.); +#120169 = EDGE_LOOP('',(#120170,#120176,#120177,#120178)); +#120170 = ORIENTED_EDGE('',*,*,#120171,.T.); +#120171 = EDGE_CURVE('',#117331,#117267,#120172,.T.); +#120172 = LINE('',#120173,#120174); +#120173 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#120174 = VECTOR('',#120175,1.); +#120175 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120176 = ORIENTED_EDGE('',*,*,#117274,.T.); +#120177 = ORIENTED_EDGE('',*,*,#120154,.F.); +#120178 = ORIENTED_EDGE('',*,*,#117338,.F.); +#120179 = PLANE('',#120180); +#120180 = AXIS2_PLACEMENT_3D('',#120181,#120182,#120183); +#120181 = CARTESIAN_POINT('',(-0.1,-22.56,-2.5)); +#120182 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120183 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120184 = ADVANCED_FACE('',(#120185),#120191,.T.); +#120185 = FACE_BOUND('',#120186,.T.); +#120186 = EDGE_LOOP('',(#120187,#120188,#120189,#120190)); +#120187 = ORIENTED_EDGE('',*,*,#117304,.T.); +#120188 = ORIENTED_EDGE('',*,*,#117266,.T.); +#120189 = ORIENTED_EDGE('',*,*,#120171,.F.); +#120190 = ORIENTED_EDGE('',*,*,#117330,.F.); +#120191 = PLANE('',#120192); +#120192 = AXIS2_PLACEMENT_3D('',#120193,#120194,#120195); +#120193 = CARTESIAN_POINT('',(-0.1,-22.56,0.2)); +#120194 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120195 = DIRECTION('',(0.,0.,-1.)); +#120196 = ADVANCED_FACE('',(#120197),#120208,.T.); +#120197 = FACE_BOUND('',#120198,.T.); +#120198 = EDGE_LOOP('',(#120199,#120205,#120206,#120207)); +#120199 = ORIENTED_EDGE('',*,*,#120200,.T.); +#120200 = EDGE_CURVE('',#117450,#117386,#120201,.T.); +#120201 = LINE('',#120202,#120203); +#120202 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#120203 = VECTOR('',#120204,1.); +#120204 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120205 = ORIENTED_EDGE('',*,*,#117385,.T.); +#120206 = ORIENTED_EDGE('',*,*,#117370,.F.); +#120207 = ORIENTED_EDGE('',*,*,#117449,.F.); +#120208 = PLANE('',#120209); +#120209 = AXIS2_PLACEMENT_3D('',#120210,#120211,#120212); +#120210 = CARTESIAN_POINT('',(-0.1,-20.62,-2.5)); +#120211 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120212 = DIRECTION('',(0.,0.,1.)); +#120213 = ADVANCED_FACE('',(#120214),#120225,.T.); +#120214 = FACE_BOUND('',#120215,.T.); +#120215 = EDGE_LOOP('',(#120216,#120222,#120223,#120224)); +#120216 = ORIENTED_EDGE('',*,*,#120217,.T.); +#120217 = EDGE_CURVE('',#117475,#117411,#120218,.T.); +#120218 = LINE('',#120219,#120220); +#120219 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#120220 = VECTOR('',#120221,1.); +#120221 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120222 = ORIENTED_EDGE('',*,*,#117418,.T.); +#120223 = ORIENTED_EDGE('',*,*,#120200,.F.); +#120224 = ORIENTED_EDGE('',*,*,#117482,.F.); +#120225 = PLANE('',#120226); +#120226 = AXIS2_PLACEMENT_3D('',#120227,#120228,#120229); +#120227 = CARTESIAN_POINT('',(-0.1,-20.47,-3.1)); +#120228 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120229 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120230 = ADVANCED_FACE('',(#120231),#120242,.T.); +#120231 = FACE_BOUND('',#120232,.T.); +#120232 = EDGE_LOOP('',(#120233,#120239,#120240,#120241)); +#120233 = ORIENTED_EDGE('',*,*,#120234,.T.); +#120234 = EDGE_CURVE('',#117467,#117403,#120235,.T.); +#120235 = LINE('',#120236,#120237); +#120236 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#120237 = VECTOR('',#120238,1.); +#120238 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120239 = ORIENTED_EDGE('',*,*,#117410,.T.); +#120240 = ORIENTED_EDGE('',*,*,#120217,.F.); +#120241 = ORIENTED_EDGE('',*,*,#117474,.T.); +#120242 = PLANE('',#120243); +#120243 = AXIS2_PLACEMENT_3D('',#120244,#120245,#120246); +#120244 = CARTESIAN_POINT('',(-0.1,-20.17,-3.1)); +#120245 = DIRECTION('',(0.,-0.,-1.)); +#120246 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120247 = ADVANCED_FACE('',(#120248),#120259,.T.); +#120248 = FACE_BOUND('',#120249,.T.); +#120249 = EDGE_LOOP('',(#120250,#120256,#120257,#120258)); +#120250 = ORIENTED_EDGE('',*,*,#120251,.T.); +#120251 = EDGE_CURVE('',#117459,#117395,#120252,.T.); +#120252 = LINE('',#120253,#120254); +#120253 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#120254 = VECTOR('',#120255,1.); +#120255 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120256 = ORIENTED_EDGE('',*,*,#117402,.T.); +#120257 = ORIENTED_EDGE('',*,*,#120234,.F.); +#120258 = ORIENTED_EDGE('',*,*,#117466,.F.); +#120259 = PLANE('',#120260); +#120260 = AXIS2_PLACEMENT_3D('',#120261,#120262,#120263); +#120261 = CARTESIAN_POINT('',(-0.1,-20.02,-2.5)); +#120262 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120263 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120264 = ADVANCED_FACE('',(#120265),#120271,.T.); +#120265 = FACE_BOUND('',#120266,.T.); +#120266 = EDGE_LOOP('',(#120267,#120268,#120269,#120270)); +#120267 = ORIENTED_EDGE('',*,*,#117432,.T.); +#120268 = ORIENTED_EDGE('',*,*,#117394,.T.); +#120269 = ORIENTED_EDGE('',*,*,#120251,.F.); +#120270 = ORIENTED_EDGE('',*,*,#117458,.F.); +#120271 = PLANE('',#120272); +#120272 = AXIS2_PLACEMENT_3D('',#120273,#120274,#120275); +#120273 = CARTESIAN_POINT('',(-0.1,-20.02,0.2)); +#120274 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120275 = DIRECTION('',(0.,0.,-1.)); +#120276 = ADVANCED_FACE('',(#120277),#120288,.T.); +#120277 = FACE_BOUND('',#120278,.T.); +#120278 = EDGE_LOOP('',(#120279,#120285,#120286,#120287)); +#120279 = ORIENTED_EDGE('',*,*,#120280,.T.); +#120280 = EDGE_CURVE('',#117578,#117514,#120281,.T.); +#120281 = LINE('',#120282,#120283); +#120282 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#120283 = VECTOR('',#120284,1.); +#120284 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120285 = ORIENTED_EDGE('',*,*,#117513,.T.); +#120286 = ORIENTED_EDGE('',*,*,#117498,.F.); +#120287 = ORIENTED_EDGE('',*,*,#117577,.F.); +#120288 = PLANE('',#120289); +#120289 = AXIS2_PLACEMENT_3D('',#120290,#120291,#120292); +#120290 = CARTESIAN_POINT('',(-0.1,-18.08,-2.5)); +#120291 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120292 = DIRECTION('',(0.,0.,1.)); +#120293 = ADVANCED_FACE('',(#120294),#120305,.T.); +#120294 = FACE_BOUND('',#120295,.T.); +#120295 = EDGE_LOOP('',(#120296,#120302,#120303,#120304)); +#120296 = ORIENTED_EDGE('',*,*,#120297,.T.); +#120297 = EDGE_CURVE('',#117603,#117539,#120298,.T.); +#120298 = LINE('',#120299,#120300); +#120299 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#120300 = VECTOR('',#120301,1.); +#120301 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120302 = ORIENTED_EDGE('',*,*,#117546,.T.); +#120303 = ORIENTED_EDGE('',*,*,#120280,.F.); +#120304 = ORIENTED_EDGE('',*,*,#117610,.F.); +#120305 = PLANE('',#120306); +#120306 = AXIS2_PLACEMENT_3D('',#120307,#120308,#120309); +#120307 = CARTESIAN_POINT('',(-0.1,-17.93,-3.1)); +#120308 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120309 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120310 = ADVANCED_FACE('',(#120311),#120322,.T.); +#120311 = FACE_BOUND('',#120312,.T.); +#120312 = EDGE_LOOP('',(#120313,#120319,#120320,#120321)); +#120313 = ORIENTED_EDGE('',*,*,#120314,.T.); +#120314 = EDGE_CURVE('',#117595,#117531,#120315,.T.); +#120315 = LINE('',#120316,#120317); +#120316 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#120317 = VECTOR('',#120318,1.); +#120318 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120319 = ORIENTED_EDGE('',*,*,#117538,.T.); +#120320 = ORIENTED_EDGE('',*,*,#120297,.F.); +#120321 = ORIENTED_EDGE('',*,*,#117602,.T.); +#120322 = PLANE('',#120323); +#120323 = AXIS2_PLACEMENT_3D('',#120324,#120325,#120326); +#120324 = CARTESIAN_POINT('',(-0.1,-17.63,-3.1)); +#120325 = DIRECTION('',(0.,-0.,-1.)); +#120326 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120327 = ADVANCED_FACE('',(#120328),#120339,.T.); +#120328 = FACE_BOUND('',#120329,.T.); +#120329 = EDGE_LOOP('',(#120330,#120336,#120337,#120338)); +#120330 = ORIENTED_EDGE('',*,*,#120331,.T.); +#120331 = EDGE_CURVE('',#117587,#117523,#120332,.T.); +#120332 = LINE('',#120333,#120334); +#120333 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#120334 = VECTOR('',#120335,1.); +#120335 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120336 = ORIENTED_EDGE('',*,*,#117530,.T.); +#120337 = ORIENTED_EDGE('',*,*,#120314,.F.); +#120338 = ORIENTED_EDGE('',*,*,#117594,.F.); +#120339 = PLANE('',#120340); +#120340 = AXIS2_PLACEMENT_3D('',#120341,#120342,#120343); +#120341 = CARTESIAN_POINT('',(-0.1,-17.48,-2.5)); +#120342 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120343 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120344 = ADVANCED_FACE('',(#120345),#120351,.T.); +#120345 = FACE_BOUND('',#120346,.T.); +#120346 = EDGE_LOOP('',(#120347,#120348,#120349,#120350)); +#120347 = ORIENTED_EDGE('',*,*,#117560,.T.); +#120348 = ORIENTED_EDGE('',*,*,#117522,.T.); +#120349 = ORIENTED_EDGE('',*,*,#120331,.F.); +#120350 = ORIENTED_EDGE('',*,*,#117586,.F.); +#120351 = PLANE('',#120352); +#120352 = AXIS2_PLACEMENT_3D('',#120353,#120354,#120355); +#120353 = CARTESIAN_POINT('',(-0.1,-17.48,0.2)); +#120354 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120355 = DIRECTION('',(0.,0.,-1.)); +#120356 = ADVANCED_FACE('',(#120357),#120368,.T.); +#120357 = FACE_BOUND('',#120358,.T.); +#120358 = EDGE_LOOP('',(#120359,#120365,#120366,#120367)); +#120359 = ORIENTED_EDGE('',*,*,#120360,.T.); +#120360 = EDGE_CURVE('',#117706,#117642,#120361,.T.); +#120361 = LINE('',#120362,#120363); +#120362 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#120363 = VECTOR('',#120364,1.); +#120364 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120365 = ORIENTED_EDGE('',*,*,#117641,.T.); +#120366 = ORIENTED_EDGE('',*,*,#117626,.F.); +#120367 = ORIENTED_EDGE('',*,*,#117705,.F.); +#120368 = PLANE('',#120369); +#120369 = AXIS2_PLACEMENT_3D('',#120370,#120371,#120372); +#120370 = CARTESIAN_POINT('',(-0.1,-15.54,-2.5)); +#120371 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120372 = DIRECTION('',(0.,0.,1.)); +#120373 = ADVANCED_FACE('',(#120374),#120385,.T.); +#120374 = FACE_BOUND('',#120375,.T.); +#120375 = EDGE_LOOP('',(#120376,#120382,#120383,#120384)); +#120376 = ORIENTED_EDGE('',*,*,#120377,.T.); +#120377 = EDGE_CURVE('',#117731,#117667,#120378,.T.); +#120378 = LINE('',#120379,#120380); +#120379 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#120380 = VECTOR('',#120381,1.); +#120381 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120382 = ORIENTED_EDGE('',*,*,#117674,.T.); +#120383 = ORIENTED_EDGE('',*,*,#120360,.F.); +#120384 = ORIENTED_EDGE('',*,*,#117738,.F.); +#120385 = PLANE('',#120386); +#120386 = AXIS2_PLACEMENT_3D('',#120387,#120388,#120389); +#120387 = CARTESIAN_POINT('',(-0.1,-15.39,-3.1)); +#120388 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120389 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120390 = ADVANCED_FACE('',(#120391),#120402,.T.); +#120391 = FACE_BOUND('',#120392,.T.); +#120392 = EDGE_LOOP('',(#120393,#120399,#120400,#120401)); +#120393 = ORIENTED_EDGE('',*,*,#120394,.T.); +#120394 = EDGE_CURVE('',#117723,#117659,#120395,.T.); +#120395 = LINE('',#120396,#120397); +#120396 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#120397 = VECTOR('',#120398,1.); +#120398 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120399 = ORIENTED_EDGE('',*,*,#117666,.T.); +#120400 = ORIENTED_EDGE('',*,*,#120377,.F.); +#120401 = ORIENTED_EDGE('',*,*,#117730,.T.); +#120402 = PLANE('',#120403); +#120403 = AXIS2_PLACEMENT_3D('',#120404,#120405,#120406); +#120404 = CARTESIAN_POINT('',(-0.1,-15.09,-3.1)); +#120405 = DIRECTION('',(0.,-0.,-1.)); +#120406 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120407 = ADVANCED_FACE('',(#120408),#120419,.T.); +#120408 = FACE_BOUND('',#120409,.T.); +#120409 = EDGE_LOOP('',(#120410,#120416,#120417,#120418)); +#120410 = ORIENTED_EDGE('',*,*,#120411,.T.); +#120411 = EDGE_CURVE('',#117715,#117651,#120412,.T.); +#120412 = LINE('',#120413,#120414); +#120413 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#120414 = VECTOR('',#120415,1.); +#120415 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120416 = ORIENTED_EDGE('',*,*,#117658,.T.); +#120417 = ORIENTED_EDGE('',*,*,#120394,.F.); +#120418 = ORIENTED_EDGE('',*,*,#117722,.F.); +#120419 = PLANE('',#120420); +#120420 = AXIS2_PLACEMENT_3D('',#120421,#120422,#120423); +#120421 = CARTESIAN_POINT('',(-0.1,-14.94,-2.5)); +#120422 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120423 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120424 = ADVANCED_FACE('',(#120425),#120431,.T.); +#120425 = FACE_BOUND('',#120426,.T.); +#120426 = EDGE_LOOP('',(#120427,#120428,#120429,#120430)); +#120427 = ORIENTED_EDGE('',*,*,#117688,.T.); +#120428 = ORIENTED_EDGE('',*,*,#117650,.T.); +#120429 = ORIENTED_EDGE('',*,*,#120411,.F.); +#120430 = ORIENTED_EDGE('',*,*,#117714,.F.); +#120431 = PLANE('',#120432); +#120432 = AXIS2_PLACEMENT_3D('',#120433,#120434,#120435); +#120433 = CARTESIAN_POINT('',(-0.1,-14.94,0.2)); +#120434 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120435 = DIRECTION('',(0.,0.,-1.)); +#120436 = ADVANCED_FACE('',(#120437),#120448,.T.); +#120437 = FACE_BOUND('',#120438,.T.); +#120438 = EDGE_LOOP('',(#120439,#120445,#120446,#120447)); +#120439 = ORIENTED_EDGE('',*,*,#120440,.T.); +#120440 = EDGE_CURVE('',#117834,#117770,#120441,.T.); +#120441 = LINE('',#120442,#120443); +#120442 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#120443 = VECTOR('',#120444,1.); +#120444 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120445 = ORIENTED_EDGE('',*,*,#117769,.T.); +#120446 = ORIENTED_EDGE('',*,*,#117754,.F.); +#120447 = ORIENTED_EDGE('',*,*,#117833,.F.); +#120448 = PLANE('',#120449); +#120449 = AXIS2_PLACEMENT_3D('',#120450,#120451,#120452); +#120450 = CARTESIAN_POINT('',(-0.1,-13.,-2.5)); +#120451 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120452 = DIRECTION('',(0.,0.,1.)); +#120453 = ADVANCED_FACE('',(#120454),#120465,.T.); +#120454 = FACE_BOUND('',#120455,.T.); +#120455 = EDGE_LOOP('',(#120456,#120462,#120463,#120464)); +#120456 = ORIENTED_EDGE('',*,*,#120457,.T.); +#120457 = EDGE_CURVE('',#117859,#117795,#120458,.T.); +#120458 = LINE('',#120459,#120460); +#120459 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#120460 = VECTOR('',#120461,1.); +#120461 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120462 = ORIENTED_EDGE('',*,*,#117802,.T.); +#120463 = ORIENTED_EDGE('',*,*,#120440,.F.); +#120464 = ORIENTED_EDGE('',*,*,#117866,.F.); +#120465 = PLANE('',#120466); +#120466 = AXIS2_PLACEMENT_3D('',#120467,#120468,#120469); +#120467 = CARTESIAN_POINT('',(-0.1,-12.85,-3.1)); +#120468 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120469 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120470 = ADVANCED_FACE('',(#120471),#120482,.T.); +#120471 = FACE_BOUND('',#120472,.T.); +#120472 = EDGE_LOOP('',(#120473,#120479,#120480,#120481)); +#120473 = ORIENTED_EDGE('',*,*,#120474,.T.); +#120474 = EDGE_CURVE('',#117851,#117787,#120475,.T.); +#120475 = LINE('',#120476,#120477); +#120476 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#120477 = VECTOR('',#120478,1.); +#120478 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120479 = ORIENTED_EDGE('',*,*,#117794,.T.); +#120480 = ORIENTED_EDGE('',*,*,#120457,.F.); +#120481 = ORIENTED_EDGE('',*,*,#117858,.T.); +#120482 = PLANE('',#120483); +#120483 = AXIS2_PLACEMENT_3D('',#120484,#120485,#120486); +#120484 = CARTESIAN_POINT('',(-0.1,-12.55,-3.1)); +#120485 = DIRECTION('',(0.,-0.,-1.)); +#120486 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120487 = ADVANCED_FACE('',(#120488),#120499,.T.); +#120488 = FACE_BOUND('',#120489,.T.); +#120489 = EDGE_LOOP('',(#120490,#120496,#120497,#120498)); +#120490 = ORIENTED_EDGE('',*,*,#120491,.T.); +#120491 = EDGE_CURVE('',#117843,#117779,#120492,.T.); +#120492 = LINE('',#120493,#120494); +#120493 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#120494 = VECTOR('',#120495,1.); +#120495 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120496 = ORIENTED_EDGE('',*,*,#117786,.T.); +#120497 = ORIENTED_EDGE('',*,*,#120474,.F.); +#120498 = ORIENTED_EDGE('',*,*,#117850,.F.); +#120499 = PLANE('',#120500); +#120500 = AXIS2_PLACEMENT_3D('',#120501,#120502,#120503); +#120501 = CARTESIAN_POINT('',(-0.1,-12.4,-2.5)); +#120502 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120503 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120504 = ADVANCED_FACE('',(#120505),#120511,.T.); +#120505 = FACE_BOUND('',#120506,.T.); +#120506 = EDGE_LOOP('',(#120507,#120508,#120509,#120510)); +#120507 = ORIENTED_EDGE('',*,*,#117816,.T.); +#120508 = ORIENTED_EDGE('',*,*,#117778,.T.); +#120509 = ORIENTED_EDGE('',*,*,#120491,.F.); +#120510 = ORIENTED_EDGE('',*,*,#117842,.F.); +#120511 = PLANE('',#120512); +#120512 = AXIS2_PLACEMENT_3D('',#120513,#120514,#120515); +#120513 = CARTESIAN_POINT('',(-0.1,-12.4,0.2)); +#120514 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120515 = DIRECTION('',(0.,0.,-1.)); +#120516 = ADVANCED_FACE('',(#120517),#120528,.T.); +#120517 = FACE_BOUND('',#120518,.T.); +#120518 = EDGE_LOOP('',(#120519,#120525,#120526,#120527)); +#120519 = ORIENTED_EDGE('',*,*,#120520,.T.); +#120520 = EDGE_CURVE('',#117962,#117898,#120521,.T.); +#120521 = LINE('',#120522,#120523); +#120522 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#120523 = VECTOR('',#120524,1.); +#120524 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120525 = ORIENTED_EDGE('',*,*,#117897,.T.); +#120526 = ORIENTED_EDGE('',*,*,#117882,.F.); +#120527 = ORIENTED_EDGE('',*,*,#117961,.F.); +#120528 = PLANE('',#120529); +#120529 = AXIS2_PLACEMENT_3D('',#120530,#120531,#120532); +#120530 = CARTESIAN_POINT('',(-0.1,-10.46,-2.5)); +#120531 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120532 = DIRECTION('',(0.,0.,1.)); +#120533 = ADVANCED_FACE('',(#120534),#120545,.T.); +#120534 = FACE_BOUND('',#120535,.T.); +#120535 = EDGE_LOOP('',(#120536,#120542,#120543,#120544)); +#120536 = ORIENTED_EDGE('',*,*,#120537,.T.); +#120537 = EDGE_CURVE('',#117987,#117923,#120538,.T.); +#120538 = LINE('',#120539,#120540); +#120539 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#120540 = VECTOR('',#120541,1.); +#120541 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120542 = ORIENTED_EDGE('',*,*,#117930,.T.); +#120543 = ORIENTED_EDGE('',*,*,#120520,.F.); +#120544 = ORIENTED_EDGE('',*,*,#117994,.F.); +#120545 = PLANE('',#120546); +#120546 = AXIS2_PLACEMENT_3D('',#120547,#120548,#120549); +#120547 = CARTESIAN_POINT('',(-0.1,-10.31,-3.1)); +#120548 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120549 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120550 = ADVANCED_FACE('',(#120551),#120562,.T.); +#120551 = FACE_BOUND('',#120552,.T.); +#120552 = EDGE_LOOP('',(#120553,#120559,#120560,#120561)); +#120553 = ORIENTED_EDGE('',*,*,#120554,.T.); +#120554 = EDGE_CURVE('',#117979,#117915,#120555,.T.); +#120555 = LINE('',#120556,#120557); +#120556 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#120557 = VECTOR('',#120558,1.); +#120558 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120559 = ORIENTED_EDGE('',*,*,#117922,.T.); +#120560 = ORIENTED_EDGE('',*,*,#120537,.F.); +#120561 = ORIENTED_EDGE('',*,*,#117986,.T.); +#120562 = PLANE('',#120563); +#120563 = AXIS2_PLACEMENT_3D('',#120564,#120565,#120566); +#120564 = CARTESIAN_POINT('',(-0.1,-10.01,-3.1)); +#120565 = DIRECTION('',(0.,-0.,-1.)); +#120566 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120567 = ADVANCED_FACE('',(#120568),#120579,.T.); +#120568 = FACE_BOUND('',#120569,.T.); +#120569 = EDGE_LOOP('',(#120570,#120576,#120577,#120578)); +#120570 = ORIENTED_EDGE('',*,*,#120571,.T.); +#120571 = EDGE_CURVE('',#117971,#117907,#120572,.T.); +#120572 = LINE('',#120573,#120574); +#120573 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#120574 = VECTOR('',#120575,1.); +#120575 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120576 = ORIENTED_EDGE('',*,*,#117914,.T.); +#120577 = ORIENTED_EDGE('',*,*,#120554,.F.); +#120578 = ORIENTED_EDGE('',*,*,#117978,.F.); +#120579 = PLANE('',#120580); +#120580 = AXIS2_PLACEMENT_3D('',#120581,#120582,#120583); +#120581 = CARTESIAN_POINT('',(-0.1,-9.86,-2.5)); +#120582 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120583 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120584 = ADVANCED_FACE('',(#120585),#120591,.T.); +#120585 = FACE_BOUND('',#120586,.T.); +#120586 = EDGE_LOOP('',(#120587,#120588,#120589,#120590)); +#120587 = ORIENTED_EDGE('',*,*,#117944,.T.); +#120588 = ORIENTED_EDGE('',*,*,#117906,.T.); +#120589 = ORIENTED_EDGE('',*,*,#120571,.F.); +#120590 = ORIENTED_EDGE('',*,*,#117970,.F.); +#120591 = PLANE('',#120592); +#120592 = AXIS2_PLACEMENT_3D('',#120593,#120594,#120595); +#120593 = CARTESIAN_POINT('',(-0.1,-9.86,0.2)); +#120594 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120595 = DIRECTION('',(0.,0.,-1.)); +#120596 = ADVANCED_FACE('',(#120597),#120608,.T.); +#120597 = FACE_BOUND('',#120598,.T.); +#120598 = EDGE_LOOP('',(#120599,#120605,#120606,#120607)); +#120599 = ORIENTED_EDGE('',*,*,#120600,.T.); +#120600 = EDGE_CURVE('',#118090,#118026,#120601,.T.); +#120601 = LINE('',#120602,#120603); +#120602 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#120603 = VECTOR('',#120604,1.); +#120604 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120605 = ORIENTED_EDGE('',*,*,#118025,.T.); +#120606 = ORIENTED_EDGE('',*,*,#118010,.F.); +#120607 = ORIENTED_EDGE('',*,*,#118089,.F.); +#120608 = PLANE('',#120609); +#120609 = AXIS2_PLACEMENT_3D('',#120610,#120611,#120612); +#120610 = CARTESIAN_POINT('',(-0.1,-7.92,-2.5)); +#120611 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120612 = DIRECTION('',(0.,0.,1.)); +#120613 = ADVANCED_FACE('',(#120614),#120625,.T.); +#120614 = FACE_BOUND('',#120615,.T.); +#120615 = EDGE_LOOP('',(#120616,#120622,#120623,#120624)); +#120616 = ORIENTED_EDGE('',*,*,#120617,.T.); +#120617 = EDGE_CURVE('',#118115,#118051,#120618,.T.); +#120618 = LINE('',#120619,#120620); +#120619 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#120620 = VECTOR('',#120621,1.); +#120621 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120622 = ORIENTED_EDGE('',*,*,#118058,.T.); +#120623 = ORIENTED_EDGE('',*,*,#120600,.F.); +#120624 = ORIENTED_EDGE('',*,*,#118122,.F.); +#120625 = PLANE('',#120626); +#120626 = AXIS2_PLACEMENT_3D('',#120627,#120628,#120629); +#120627 = CARTESIAN_POINT('',(-0.1,-7.77,-3.1)); +#120628 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120629 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120630 = ADVANCED_FACE('',(#120631),#120642,.T.); +#120631 = FACE_BOUND('',#120632,.T.); +#120632 = EDGE_LOOP('',(#120633,#120639,#120640,#120641)); +#120633 = ORIENTED_EDGE('',*,*,#120634,.T.); +#120634 = EDGE_CURVE('',#118107,#118043,#120635,.T.); +#120635 = LINE('',#120636,#120637); +#120636 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#120637 = VECTOR('',#120638,1.); +#120638 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120639 = ORIENTED_EDGE('',*,*,#118050,.T.); +#120640 = ORIENTED_EDGE('',*,*,#120617,.F.); +#120641 = ORIENTED_EDGE('',*,*,#118114,.T.); +#120642 = PLANE('',#120643); +#120643 = AXIS2_PLACEMENT_3D('',#120644,#120645,#120646); +#120644 = CARTESIAN_POINT('',(-0.1,-7.47,-3.1)); +#120645 = DIRECTION('',(0.,-0.,-1.)); +#120646 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120647 = ADVANCED_FACE('',(#120648),#120659,.T.); +#120648 = FACE_BOUND('',#120649,.T.); +#120649 = EDGE_LOOP('',(#120650,#120656,#120657,#120658)); +#120650 = ORIENTED_EDGE('',*,*,#120651,.T.); +#120651 = EDGE_CURVE('',#118099,#118035,#120652,.T.); +#120652 = LINE('',#120653,#120654); +#120653 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#120654 = VECTOR('',#120655,1.); +#120655 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120656 = ORIENTED_EDGE('',*,*,#118042,.T.); +#120657 = ORIENTED_EDGE('',*,*,#120634,.F.); +#120658 = ORIENTED_EDGE('',*,*,#118106,.F.); +#120659 = PLANE('',#120660); +#120660 = AXIS2_PLACEMENT_3D('',#120661,#120662,#120663); +#120661 = CARTESIAN_POINT('',(-0.1,-7.32,-2.5)); +#120662 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120663 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120664 = ADVANCED_FACE('',(#120665),#120671,.T.); +#120665 = FACE_BOUND('',#120666,.T.); +#120666 = EDGE_LOOP('',(#120667,#120668,#120669,#120670)); +#120667 = ORIENTED_EDGE('',*,*,#118072,.T.); +#120668 = ORIENTED_EDGE('',*,*,#118034,.T.); +#120669 = ORIENTED_EDGE('',*,*,#120651,.F.); +#120670 = ORIENTED_EDGE('',*,*,#118098,.F.); +#120671 = PLANE('',#120672); +#120672 = AXIS2_PLACEMENT_3D('',#120673,#120674,#120675); +#120673 = CARTESIAN_POINT('',(-0.1,-7.32,0.2)); +#120674 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120675 = DIRECTION('',(0.,0.,-1.)); +#120676 = ADVANCED_FACE('',(#120677),#120688,.T.); +#120677 = FACE_BOUND('',#120678,.T.); +#120678 = EDGE_LOOP('',(#120679,#120685,#120686,#120687)); +#120679 = ORIENTED_EDGE('',*,*,#120680,.T.); +#120680 = EDGE_CURVE('',#118218,#118154,#120681,.T.); +#120681 = LINE('',#120682,#120683); +#120682 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#120683 = VECTOR('',#120684,1.); +#120684 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120685 = ORIENTED_EDGE('',*,*,#118153,.T.); +#120686 = ORIENTED_EDGE('',*,*,#118138,.F.); +#120687 = ORIENTED_EDGE('',*,*,#118217,.F.); +#120688 = PLANE('',#120689); +#120689 = AXIS2_PLACEMENT_3D('',#120690,#120691,#120692); +#120690 = CARTESIAN_POINT('',(-0.1,-5.38,-2.5)); +#120691 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120692 = DIRECTION('',(0.,0.,1.)); +#120693 = ADVANCED_FACE('',(#120694),#120705,.T.); +#120694 = FACE_BOUND('',#120695,.T.); +#120695 = EDGE_LOOP('',(#120696,#120702,#120703,#120704)); +#120696 = ORIENTED_EDGE('',*,*,#120697,.T.); +#120697 = EDGE_CURVE('',#118243,#118179,#120698,.T.); +#120698 = LINE('',#120699,#120700); +#120699 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#120700 = VECTOR('',#120701,1.); +#120701 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120702 = ORIENTED_EDGE('',*,*,#118186,.T.); +#120703 = ORIENTED_EDGE('',*,*,#120680,.F.); +#120704 = ORIENTED_EDGE('',*,*,#118250,.F.); +#120705 = PLANE('',#120706); +#120706 = AXIS2_PLACEMENT_3D('',#120707,#120708,#120709); +#120707 = CARTESIAN_POINT('',(-0.1,-5.23,-3.1)); +#120708 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120709 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120710 = ADVANCED_FACE('',(#120711),#120722,.T.); +#120711 = FACE_BOUND('',#120712,.T.); +#120712 = EDGE_LOOP('',(#120713,#120719,#120720,#120721)); +#120713 = ORIENTED_EDGE('',*,*,#120714,.T.); +#120714 = EDGE_CURVE('',#118235,#118171,#120715,.T.); +#120715 = LINE('',#120716,#120717); +#120716 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#120717 = VECTOR('',#120718,1.); +#120718 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120719 = ORIENTED_EDGE('',*,*,#118178,.T.); +#120720 = ORIENTED_EDGE('',*,*,#120697,.F.); +#120721 = ORIENTED_EDGE('',*,*,#118242,.T.); +#120722 = PLANE('',#120723); +#120723 = AXIS2_PLACEMENT_3D('',#120724,#120725,#120726); +#120724 = CARTESIAN_POINT('',(-0.1,-4.93,-3.1)); +#120725 = DIRECTION('',(0.,-0.,-1.)); +#120726 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120727 = ADVANCED_FACE('',(#120728),#120739,.T.); +#120728 = FACE_BOUND('',#120729,.T.); +#120729 = EDGE_LOOP('',(#120730,#120736,#120737,#120738)); +#120730 = ORIENTED_EDGE('',*,*,#120731,.T.); +#120731 = EDGE_CURVE('',#118227,#118163,#120732,.T.); +#120732 = LINE('',#120733,#120734); +#120733 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#120734 = VECTOR('',#120735,1.); +#120735 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120736 = ORIENTED_EDGE('',*,*,#118170,.T.); +#120737 = ORIENTED_EDGE('',*,*,#120714,.F.); +#120738 = ORIENTED_EDGE('',*,*,#118234,.F.); +#120739 = PLANE('',#120740); +#120740 = AXIS2_PLACEMENT_3D('',#120741,#120742,#120743); +#120741 = CARTESIAN_POINT('',(-0.1,-4.78,-2.5)); +#120742 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120743 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120744 = ADVANCED_FACE('',(#120745),#120751,.T.); +#120745 = FACE_BOUND('',#120746,.T.); +#120746 = EDGE_LOOP('',(#120747,#120748,#120749,#120750)); +#120747 = ORIENTED_EDGE('',*,*,#118200,.T.); +#120748 = ORIENTED_EDGE('',*,*,#118162,.T.); +#120749 = ORIENTED_EDGE('',*,*,#120731,.F.); +#120750 = ORIENTED_EDGE('',*,*,#118226,.F.); +#120751 = PLANE('',#120752); +#120752 = AXIS2_PLACEMENT_3D('',#120753,#120754,#120755); +#120753 = CARTESIAN_POINT('',(-0.1,-4.78,0.2)); +#120754 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120755 = DIRECTION('',(0.,0.,-1.)); +#120756 = ADVANCED_FACE('',(#120757),#120768,.T.); +#120757 = FACE_BOUND('',#120758,.T.); +#120758 = EDGE_LOOP('',(#120759,#120765,#120766,#120767)); +#120759 = ORIENTED_EDGE('',*,*,#120760,.T.); +#120760 = EDGE_CURVE('',#118346,#118282,#120761,.T.); +#120761 = LINE('',#120762,#120763); +#120762 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#120763 = VECTOR('',#120764,1.); +#120764 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120765 = ORIENTED_EDGE('',*,*,#118281,.T.); +#120766 = ORIENTED_EDGE('',*,*,#118266,.F.); +#120767 = ORIENTED_EDGE('',*,*,#118345,.F.); +#120768 = PLANE('',#120769); +#120769 = AXIS2_PLACEMENT_3D('',#120770,#120771,#120772); +#120770 = CARTESIAN_POINT('',(-0.1,-2.84,-2.5)); +#120771 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120772 = DIRECTION('',(0.,0.,1.)); +#120773 = ADVANCED_FACE('',(#120774),#120785,.T.); +#120774 = FACE_BOUND('',#120775,.T.); +#120775 = EDGE_LOOP('',(#120776,#120782,#120783,#120784)); +#120776 = ORIENTED_EDGE('',*,*,#120777,.T.); +#120777 = EDGE_CURVE('',#118371,#118307,#120778,.T.); +#120778 = LINE('',#120779,#120780); +#120779 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#120780 = VECTOR('',#120781,1.); +#120781 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120782 = ORIENTED_EDGE('',*,*,#118314,.T.); +#120783 = ORIENTED_EDGE('',*,*,#120760,.F.); +#120784 = ORIENTED_EDGE('',*,*,#118378,.F.); +#120785 = PLANE('',#120786); +#120786 = AXIS2_PLACEMENT_3D('',#120787,#120788,#120789); +#120787 = CARTESIAN_POINT('',(-0.1,-2.69,-3.1)); +#120788 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120789 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120790 = ADVANCED_FACE('',(#120791),#120802,.T.); +#120791 = FACE_BOUND('',#120792,.T.); +#120792 = EDGE_LOOP('',(#120793,#120799,#120800,#120801)); +#120793 = ORIENTED_EDGE('',*,*,#120794,.T.); +#120794 = EDGE_CURVE('',#118363,#118299,#120795,.T.); +#120795 = LINE('',#120796,#120797); +#120796 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#120797 = VECTOR('',#120798,1.); +#120798 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120799 = ORIENTED_EDGE('',*,*,#118306,.T.); +#120800 = ORIENTED_EDGE('',*,*,#120777,.F.); +#120801 = ORIENTED_EDGE('',*,*,#118370,.T.); +#120802 = PLANE('',#120803); +#120803 = AXIS2_PLACEMENT_3D('',#120804,#120805,#120806); +#120804 = CARTESIAN_POINT('',(-0.1,-2.39,-3.1)); +#120805 = DIRECTION('',(0.,-0.,-1.)); +#120806 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120807 = ADVANCED_FACE('',(#120808),#120819,.T.); +#120808 = FACE_BOUND('',#120809,.T.); +#120809 = EDGE_LOOP('',(#120810,#120816,#120817,#120818)); +#120810 = ORIENTED_EDGE('',*,*,#120811,.T.); +#120811 = EDGE_CURVE('',#118355,#118291,#120812,.T.); +#120812 = LINE('',#120813,#120814); +#120813 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#120814 = VECTOR('',#120815,1.); +#120815 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120816 = ORIENTED_EDGE('',*,*,#118298,.T.); +#120817 = ORIENTED_EDGE('',*,*,#120794,.F.); +#120818 = ORIENTED_EDGE('',*,*,#118362,.F.); +#120819 = PLANE('',#120820); +#120820 = AXIS2_PLACEMENT_3D('',#120821,#120822,#120823); +#120821 = CARTESIAN_POINT('',(-0.1,-2.24,-2.5)); +#120822 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120823 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120824 = ADVANCED_FACE('',(#120825),#120831,.T.); +#120825 = FACE_BOUND('',#120826,.T.); +#120826 = EDGE_LOOP('',(#120827,#120828,#120829,#120830)); +#120827 = ORIENTED_EDGE('',*,*,#118328,.T.); +#120828 = ORIENTED_EDGE('',*,*,#118290,.T.); +#120829 = ORIENTED_EDGE('',*,*,#120811,.F.); +#120830 = ORIENTED_EDGE('',*,*,#118354,.F.); +#120831 = PLANE('',#120832); +#120832 = AXIS2_PLACEMENT_3D('',#120833,#120834,#120835); +#120833 = CARTESIAN_POINT('',(-0.1,-2.24,0.2)); +#120834 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120835 = DIRECTION('',(0.,0.,-1.)); +#120836 = ADVANCED_FACE('',(#120837),#120848,.T.); +#120837 = FACE_BOUND('',#120838,.T.); +#120838 = EDGE_LOOP('',(#120839,#120845,#120846,#120847)); +#120839 = ORIENTED_EDGE('',*,*,#120840,.T.); +#120840 = EDGE_CURVE('',#118474,#118410,#120841,.T.); +#120841 = LINE('',#120842,#120843); +#120842 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#120843 = VECTOR('',#120844,1.); +#120844 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120845 = ORIENTED_EDGE('',*,*,#118409,.T.); +#120846 = ORIENTED_EDGE('',*,*,#118394,.F.); +#120847 = ORIENTED_EDGE('',*,*,#118473,.F.); +#120848 = PLANE('',#120849); +#120849 = AXIS2_PLACEMENT_3D('',#120850,#120851,#120852); +#120850 = CARTESIAN_POINT('',(-0.1,-0.3,-2.5)); +#120851 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120852 = DIRECTION('',(0.,0.,1.)); +#120853 = ADVANCED_FACE('',(#120854),#120865,.T.); +#120854 = FACE_BOUND('',#120855,.T.); +#120855 = EDGE_LOOP('',(#120856,#120862,#120863,#120864)); +#120856 = ORIENTED_EDGE('',*,*,#120857,.T.); +#120857 = EDGE_CURVE('',#118499,#118435,#120858,.T.); +#120858 = LINE('',#120859,#120860); +#120859 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#120860 = VECTOR('',#120861,1.); +#120861 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120862 = ORIENTED_EDGE('',*,*,#118442,.T.); +#120863 = ORIENTED_EDGE('',*,*,#120840,.F.); +#120864 = ORIENTED_EDGE('',*,*,#118506,.F.); +#120865 = PLANE('',#120866); +#120866 = AXIS2_PLACEMENT_3D('',#120867,#120868,#120869); +#120867 = CARTESIAN_POINT('',(-0.1,-0.15,-3.1)); +#120868 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#120869 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + 0.970142500145)); +#120870 = ADVANCED_FACE('',(#120871),#120882,.T.); +#120871 = FACE_BOUND('',#120872,.T.); +#120872 = EDGE_LOOP('',(#120873,#120879,#120880,#120881)); +#120873 = ORIENTED_EDGE('',*,*,#120874,.T.); +#120874 = EDGE_CURVE('',#118491,#118427,#120875,.T.); +#120875 = LINE('',#120876,#120877); +#120876 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#120877 = VECTOR('',#120878,1.); +#120878 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120879 = ORIENTED_EDGE('',*,*,#118434,.T.); +#120880 = ORIENTED_EDGE('',*,*,#120857,.F.); +#120881 = ORIENTED_EDGE('',*,*,#118498,.T.); +#120882 = PLANE('',#120883); +#120883 = AXIS2_PLACEMENT_3D('',#120884,#120885,#120886); +#120884 = CARTESIAN_POINT('',(-0.1,0.15,-3.1)); +#120885 = DIRECTION('',(0.,-0.,-1.)); +#120886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120887 = ADVANCED_FACE('',(#120888),#120899,.T.); +#120888 = FACE_BOUND('',#120889,.T.); +#120889 = EDGE_LOOP('',(#120890,#120896,#120897,#120898)); +#120890 = ORIENTED_EDGE('',*,*,#120891,.T.); +#120891 = EDGE_CURVE('',#118483,#118419,#120892,.T.); +#120892 = LINE('',#120893,#120894); +#120893 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#120894 = VECTOR('',#120895,1.); +#120895 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#120896 = ORIENTED_EDGE('',*,*,#118426,.T.); +#120897 = ORIENTED_EDGE('',*,*,#120874,.F.); +#120898 = ORIENTED_EDGE('',*,*,#118490,.F.); +#120899 = PLANE('',#120900); +#120900 = AXIS2_PLACEMENT_3D('',#120901,#120902,#120903); +#120901 = CARTESIAN_POINT('',(-0.1,0.3,-2.5)); +#120902 = DIRECTION('',(1.077074540829E-16,0.970142500145, + -0.242535625036)); +#120903 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#120904 = ADVANCED_FACE('',(#120905),#120911,.T.); +#120905 = FACE_BOUND('',#120906,.T.); +#120906 = EDGE_LOOP('',(#120907,#120908,#120909,#120910)); +#120907 = ORIENTED_EDGE('',*,*,#118456,.T.); +#120908 = ORIENTED_EDGE('',*,*,#118418,.T.); +#120909 = ORIENTED_EDGE('',*,*,#120891,.F.); +#120910 = ORIENTED_EDGE('',*,*,#118482,.F.); +#120911 = PLANE('',#120912); +#120912 = AXIS2_PLACEMENT_3D('',#120913,#120914,#120915); +#120913 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#120914 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120915 = DIRECTION('',(0.,0.,-1.)); +#120916 = ADVANCED_FACE('',(#120917),#120928,.T.); +#120917 = FACE_BOUND('',#120918,.T.); +#120918 = EDGE_LOOP('',(#120919,#120920,#120921,#120922)); +#120919 = ORIENTED_EDGE('',*,*,#118665,.T.); +#120920 = ORIENTED_EDGE('',*,*,#118528,.T.); +#120921 = ORIENTED_EDGE('',*,*,#118553,.T.); +#120922 = ORIENTED_EDGE('',*,*,#120923,.T.); +#120923 = EDGE_CURVE('',#118554,#118658,#120924,.T.); +#120924 = LINE('',#120925,#120926); +#120925 = CARTESIAN_POINT('',(0.1,-22.86,0.9)); +#120926 = VECTOR('',#120927,1.); +#120927 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120928 = PLANE('',#120929); +#120929 = AXIS2_PLACEMENT_3D('',#120930,#120931,#120932); +#120930 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#120931 = DIRECTION('',(0.,0.,1.)); +#120932 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#120933 = ADVANCED_FACE('',(#120934),#120945,.T.); +#120934 = FACE_BOUND('',#120935,.T.); +#120935 = EDGE_LOOP('',(#120936,#120937,#120943,#120944)); +#120936 = ORIENTED_EDGE('',*,*,#118633,.T.); +#120937 = ORIENTED_EDGE('',*,*,#120938,.F.); +#120938 = EDGE_CURVE('',#118578,#118634,#120939,.T.); +#120939 = LINE('',#120940,#120941); +#120940 = CARTESIAN_POINT('',(-0.1,-22.86,0.9)); +#120941 = VECTOR('',#120942,1.); +#120942 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#120943 = ORIENTED_EDGE('',*,*,#118585,.T.); +#120944 = ORIENTED_EDGE('',*,*,#118608,.T.); +#120945 = PLANE('',#120946); +#120946 = AXIS2_PLACEMENT_3D('',#120947,#120948,#120949); +#120947 = CARTESIAN_POINT('',(-2.631644901996E-15,-22.86,0.9)); +#120948 = DIRECTION('',(0.,0.,1.)); +#120949 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#120950 = ADVANCED_FACE('',(#120951),#120994,.T.); +#120951 = FACE_BOUND('',#120952,.T.); +#120952 = EDGE_LOOP('',(#120953,#120954,#120962,#120970,#120978,#120986, + #120992,#120993)); +#120953 = ORIENTED_EDGE('',*,*,#118641,.F.); +#120954 = ORIENTED_EDGE('',*,*,#120955,.T.); +#120955 = EDGE_CURVE('',#118642,#120956,#120958,.T.); +#120956 = VERTEX_POINT('',#120957); +#120957 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#120958 = LINE('',#120959,#120960); +#120959 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#120960 = VECTOR('',#120961,1.); +#120961 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#120962 = ORIENTED_EDGE('',*,*,#120963,.T.); +#120963 = EDGE_CURVE('',#120956,#120964,#120966,.T.); +#120964 = VERTEX_POINT('',#120965); +#120965 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#120966 = LINE('',#120967,#120968); +#120967 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#120968 = VECTOR('',#120969,1.); +#120969 = DIRECTION('',(0.,0.,-1.)); +#120970 = ORIENTED_EDGE('',*,*,#120971,.T.); +#120971 = EDGE_CURVE('',#120964,#120972,#120974,.T.); +#120972 = VERTEX_POINT('',#120973); +#120973 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#120974 = LINE('',#120975,#120976); +#120975 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#120976 = VECTOR('',#120977,1.); +#120977 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#120978 = ORIENTED_EDGE('',*,*,#120979,.T.); +#120979 = EDGE_CURVE('',#120972,#120980,#120982,.T.); +#120980 = VERTEX_POINT('',#120981); +#120981 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#120982 = LINE('',#120983,#120984); +#120983 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#120984 = VECTOR('',#120985,1.); +#120985 = DIRECTION('',(0.,0.,1.)); +#120986 = ORIENTED_EDGE('',*,*,#120987,.T.); +#120987 = EDGE_CURVE('',#120980,#118570,#120988,.T.); +#120988 = LINE('',#120989,#120990); +#120989 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#120990 = VECTOR('',#120991,1.); +#120991 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#120992 = ORIENTED_EDGE('',*,*,#118577,.F.); +#120993 = ORIENTED_EDGE('',*,*,#120938,.T.); +#120994 = PLANE('',#120995); +#120995 = AXIS2_PLACEMENT_3D('',#120996,#120997,#120998); +#120996 = CARTESIAN_POINT('',(-0.1,-22.86,3.911477598424)); +#120997 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#120998 = DIRECTION('',(0.,0.,1.)); +#120999 = ADVANCED_FACE('',(#121000),#121018,.T.); +#121000 = FACE_BOUND('',#121001,.T.); +#121001 = EDGE_LOOP('',(#121002,#121010,#121016,#121017)); +#121002 = ORIENTED_EDGE('',*,*,#121003,.T.); +#121003 = EDGE_CURVE('',#120980,#121004,#121006,.T.); +#121004 = VERTEX_POINT('',#121005); +#121005 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#121006 = LINE('',#121007,#121008); +#121007 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#121008 = VECTOR('',#121009,1.); +#121009 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121010 = ORIENTED_EDGE('',*,*,#121011,.T.); +#121011 = EDGE_CURVE('',#121004,#118562,#121012,.T.); +#121012 = LINE('',#121013,#121014); +#121013 = CARTESIAN_POINT('',(0.1,-22.61,7.35)); +#121014 = VECTOR('',#121015,1.); +#121015 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121016 = ORIENTED_EDGE('',*,*,#118569,.F.); +#121017 = ORIENTED_EDGE('',*,*,#120987,.F.); +#121018 = PLANE('',#121019); +#121019 = AXIS2_PLACEMENT_3D('',#121020,#121021,#121022); +#121020 = CARTESIAN_POINT('',(-0.1,-22.61,7.35)); +#121021 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121022 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121023 = ADVANCED_FACE('',(#121024),#121060,.F.); +#121024 = FACE_BOUND('',#121025,.F.); +#121025 = EDGE_LOOP('',(#121026,#121027,#121035,#121043,#121051,#121057, + #121058,#121059)); +#121026 = ORIENTED_EDGE('',*,*,#118657,.F.); +#121027 = ORIENTED_EDGE('',*,*,#121028,.T.); +#121028 = EDGE_CURVE('',#118650,#121029,#121031,.T.); +#121029 = VERTEX_POINT('',#121030); +#121030 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#121031 = LINE('',#121032,#121033); +#121032 = CARTESIAN_POINT('',(0.1,-23.16,7.4)); +#121033 = VECTOR('',#121034,1.); +#121034 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121035 = ORIENTED_EDGE('',*,*,#121036,.T.); +#121036 = EDGE_CURVE('',#121029,#121037,#121039,.T.); +#121037 = VERTEX_POINT('',#121038); +#121038 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#121039 = LINE('',#121040,#121041); +#121040 = CARTESIAN_POINT('',(0.1,-23.11,7.35)); +#121041 = VECTOR('',#121042,1.); +#121042 = DIRECTION('',(0.,0.,-1.)); +#121043 = ORIENTED_EDGE('',*,*,#121044,.T.); +#121044 = EDGE_CURVE('',#121037,#121045,#121047,.T.); +#121045 = VERTEX_POINT('',#121046); +#121046 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#121047 = LINE('',#121048,#121049); +#121048 = CARTESIAN_POINT('',(0.1,-23.11,1.25)); +#121049 = VECTOR('',#121050,1.); +#121050 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121051 = ORIENTED_EDGE('',*,*,#121052,.T.); +#121052 = EDGE_CURVE('',#121045,#121004,#121053,.T.); +#121053 = LINE('',#121054,#121055); +#121054 = CARTESIAN_POINT('',(0.1,-22.61,1.25)); +#121055 = VECTOR('',#121056,1.); +#121056 = DIRECTION('',(0.,0.,1.)); +#121057 = ORIENTED_EDGE('',*,*,#121011,.T.); +#121058 = ORIENTED_EDGE('',*,*,#118561,.F.); +#121059 = ORIENTED_EDGE('',*,*,#120923,.T.); +#121060 = PLANE('',#121061); +#121061 = AXIS2_PLACEMENT_3D('',#121062,#121063,#121064); +#121062 = CARTESIAN_POINT('',(0.1,-22.86,3.911477598424)); +#121063 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121064 = DIRECTION('',(0.,0.,1.)); +#121065 = ADVANCED_FACE('',(#121066),#121077,.T.); +#121066 = FACE_BOUND('',#121067,.T.); +#121067 = EDGE_LOOP('',(#121068,#121069,#121070,#121076)); +#121068 = ORIENTED_EDGE('',*,*,#118649,.T.); +#121069 = ORIENTED_EDGE('',*,*,#121028,.T.); +#121070 = ORIENTED_EDGE('',*,*,#121071,.F.); +#121071 = EDGE_CURVE('',#120956,#121029,#121072,.T.); +#121072 = LINE('',#121073,#121074); +#121073 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#121074 = VECTOR('',#121075,1.); +#121075 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121076 = ORIENTED_EDGE('',*,*,#120955,.F.); +#121077 = PLANE('',#121078); +#121078 = AXIS2_PLACEMENT_3D('',#121079,#121080,#121081); +#121079 = CARTESIAN_POINT('',(-0.1,-23.16,7.4)); +#121080 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121081 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121082 = ADVANCED_FACE('',(#121083),#121094,.T.); +#121083 = FACE_BOUND('',#121084,.T.); +#121084 = EDGE_LOOP('',(#121085,#121086,#121087,#121088)); +#121085 = ORIENTED_EDGE('',*,*,#118825,.T.); +#121086 = ORIENTED_EDGE('',*,*,#118688,.T.); +#121087 = ORIENTED_EDGE('',*,*,#118713,.T.); +#121088 = ORIENTED_EDGE('',*,*,#121089,.T.); +#121089 = EDGE_CURVE('',#118714,#118818,#121090,.T.); +#121090 = LINE('',#121091,#121092); +#121091 = CARTESIAN_POINT('',(0.1,-20.32,0.9)); +#121092 = VECTOR('',#121093,1.); +#121093 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121094 = PLANE('',#121095); +#121095 = AXIS2_PLACEMENT_3D('',#121096,#121097,#121098); +#121096 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#121097 = DIRECTION('',(0.,0.,1.)); +#121098 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121099 = ADVANCED_FACE('',(#121100),#121111,.T.); +#121100 = FACE_BOUND('',#121101,.T.); +#121101 = EDGE_LOOP('',(#121102,#121103,#121109,#121110)); +#121102 = ORIENTED_EDGE('',*,*,#118793,.T.); +#121103 = ORIENTED_EDGE('',*,*,#121104,.F.); +#121104 = EDGE_CURVE('',#118738,#118794,#121105,.T.); +#121105 = LINE('',#121106,#121107); +#121106 = CARTESIAN_POINT('',(-0.1,-20.32,0.9)); +#121107 = VECTOR('',#121108,1.); +#121108 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121109 = ORIENTED_EDGE('',*,*,#118745,.T.); +#121110 = ORIENTED_EDGE('',*,*,#118768,.T.); +#121111 = PLANE('',#121112); +#121112 = AXIS2_PLACEMENT_3D('',#121113,#121114,#121115); +#121113 = CARTESIAN_POINT('',(-2.349648253741E-15,-20.32,0.9)); +#121114 = DIRECTION('',(0.,0.,1.)); +#121115 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121116 = ADVANCED_FACE('',(#121117),#121160,.T.); +#121117 = FACE_BOUND('',#121118,.T.); +#121118 = EDGE_LOOP('',(#121119,#121120,#121128,#121136,#121144,#121152, + #121158,#121159)); +#121119 = ORIENTED_EDGE('',*,*,#118801,.F.); +#121120 = ORIENTED_EDGE('',*,*,#121121,.T.); +#121121 = EDGE_CURVE('',#118802,#121122,#121124,.T.); +#121122 = VERTEX_POINT('',#121123); +#121123 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#121124 = LINE('',#121125,#121126); +#121125 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#121126 = VECTOR('',#121127,1.); +#121127 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121128 = ORIENTED_EDGE('',*,*,#121129,.T.); +#121129 = EDGE_CURVE('',#121122,#121130,#121132,.T.); +#121130 = VERTEX_POINT('',#121131); +#121131 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#121132 = LINE('',#121133,#121134); +#121133 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#121134 = VECTOR('',#121135,1.); +#121135 = DIRECTION('',(0.,0.,-1.)); +#121136 = ORIENTED_EDGE('',*,*,#121137,.T.); +#121137 = EDGE_CURVE('',#121130,#121138,#121140,.T.); +#121138 = VERTEX_POINT('',#121139); +#121139 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#121140 = LINE('',#121141,#121142); +#121141 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#121142 = VECTOR('',#121143,1.); +#121143 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121144 = ORIENTED_EDGE('',*,*,#121145,.T.); +#121145 = EDGE_CURVE('',#121138,#121146,#121148,.T.); +#121146 = VERTEX_POINT('',#121147); +#121147 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121148 = LINE('',#121149,#121150); +#121149 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#121150 = VECTOR('',#121151,1.); +#121151 = DIRECTION('',(0.,0.,1.)); +#121152 = ORIENTED_EDGE('',*,*,#121153,.T.); +#121153 = EDGE_CURVE('',#121146,#118730,#121154,.T.); +#121154 = LINE('',#121155,#121156); +#121155 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121156 = VECTOR('',#121157,1.); +#121157 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121158 = ORIENTED_EDGE('',*,*,#118737,.F.); +#121159 = ORIENTED_EDGE('',*,*,#121104,.T.); +#121160 = PLANE('',#121161); +#121161 = AXIS2_PLACEMENT_3D('',#121162,#121163,#121164); +#121162 = CARTESIAN_POINT('',(-0.1,-20.32,3.911477598424)); +#121163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121164 = DIRECTION('',(0.,0.,1.)); +#121165 = ADVANCED_FACE('',(#121166),#121184,.T.); +#121166 = FACE_BOUND('',#121167,.T.); +#121167 = EDGE_LOOP('',(#121168,#121176,#121182,#121183)); +#121168 = ORIENTED_EDGE('',*,*,#121169,.T.); +#121169 = EDGE_CURVE('',#121146,#121170,#121172,.T.); +#121170 = VERTEX_POINT('',#121171); +#121171 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#121172 = LINE('',#121173,#121174); +#121173 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121174 = VECTOR('',#121175,1.); +#121175 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121176 = ORIENTED_EDGE('',*,*,#121177,.T.); +#121177 = EDGE_CURVE('',#121170,#118722,#121178,.T.); +#121178 = LINE('',#121179,#121180); +#121179 = CARTESIAN_POINT('',(0.1,-20.07,7.35)); +#121180 = VECTOR('',#121181,1.); +#121181 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121182 = ORIENTED_EDGE('',*,*,#118729,.F.); +#121183 = ORIENTED_EDGE('',*,*,#121153,.F.); +#121184 = PLANE('',#121185); +#121185 = AXIS2_PLACEMENT_3D('',#121186,#121187,#121188); +#121186 = CARTESIAN_POINT('',(-0.1,-20.07,7.35)); +#121187 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121188 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121189 = ADVANCED_FACE('',(#121190),#121226,.F.); +#121190 = FACE_BOUND('',#121191,.F.); +#121191 = EDGE_LOOP('',(#121192,#121193,#121201,#121209,#121217,#121223, + #121224,#121225)); +#121192 = ORIENTED_EDGE('',*,*,#118817,.F.); +#121193 = ORIENTED_EDGE('',*,*,#121194,.T.); +#121194 = EDGE_CURVE('',#118810,#121195,#121197,.T.); +#121195 = VERTEX_POINT('',#121196); +#121196 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#121197 = LINE('',#121198,#121199); +#121198 = CARTESIAN_POINT('',(0.1,-20.62,7.4)); +#121199 = VECTOR('',#121200,1.); +#121200 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121201 = ORIENTED_EDGE('',*,*,#121202,.T.); +#121202 = EDGE_CURVE('',#121195,#121203,#121205,.T.); +#121203 = VERTEX_POINT('',#121204); +#121204 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#121205 = LINE('',#121206,#121207); +#121206 = CARTESIAN_POINT('',(0.1,-20.57,7.35)); +#121207 = VECTOR('',#121208,1.); +#121208 = DIRECTION('',(0.,0.,-1.)); +#121209 = ORIENTED_EDGE('',*,*,#121210,.T.); +#121210 = EDGE_CURVE('',#121203,#121211,#121213,.T.); +#121211 = VERTEX_POINT('',#121212); +#121212 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#121213 = LINE('',#121214,#121215); +#121214 = CARTESIAN_POINT('',(0.1,-20.57,1.25)); +#121215 = VECTOR('',#121216,1.); +#121216 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121217 = ORIENTED_EDGE('',*,*,#121218,.T.); +#121218 = EDGE_CURVE('',#121211,#121170,#121219,.T.); +#121219 = LINE('',#121220,#121221); +#121220 = CARTESIAN_POINT('',(0.1,-20.07,1.25)); +#121221 = VECTOR('',#121222,1.); +#121222 = DIRECTION('',(0.,0.,1.)); +#121223 = ORIENTED_EDGE('',*,*,#121177,.T.); +#121224 = ORIENTED_EDGE('',*,*,#118721,.F.); +#121225 = ORIENTED_EDGE('',*,*,#121089,.T.); +#121226 = PLANE('',#121227); +#121227 = AXIS2_PLACEMENT_3D('',#121228,#121229,#121230); +#121228 = CARTESIAN_POINT('',(0.1,-20.32,3.911477598424)); +#121229 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121230 = DIRECTION('',(0.,0.,1.)); +#121231 = ADVANCED_FACE('',(#121232),#121243,.T.); +#121232 = FACE_BOUND('',#121233,.T.); +#121233 = EDGE_LOOP('',(#121234,#121235,#121236,#121242)); +#121234 = ORIENTED_EDGE('',*,*,#118809,.T.); +#121235 = ORIENTED_EDGE('',*,*,#121194,.T.); +#121236 = ORIENTED_EDGE('',*,*,#121237,.F.); +#121237 = EDGE_CURVE('',#121122,#121195,#121238,.T.); +#121238 = LINE('',#121239,#121240); +#121239 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#121240 = VECTOR('',#121241,1.); +#121241 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121242 = ORIENTED_EDGE('',*,*,#121121,.F.); +#121243 = PLANE('',#121244); +#121244 = AXIS2_PLACEMENT_3D('',#121245,#121246,#121247); +#121245 = CARTESIAN_POINT('',(-0.1,-20.62,7.4)); +#121246 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121247 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121248 = ADVANCED_FACE('',(#121249),#121260,.T.); +#121249 = FACE_BOUND('',#121250,.T.); +#121250 = EDGE_LOOP('',(#121251,#121252,#121253,#121254)); +#121251 = ORIENTED_EDGE('',*,*,#118985,.T.); +#121252 = ORIENTED_EDGE('',*,*,#118848,.T.); +#121253 = ORIENTED_EDGE('',*,*,#118873,.T.); +#121254 = ORIENTED_EDGE('',*,*,#121255,.T.); +#121255 = EDGE_CURVE('',#118874,#118978,#121256,.T.); +#121256 = LINE('',#121257,#121258); +#121257 = CARTESIAN_POINT('',(0.1,-17.78,0.9)); +#121258 = VECTOR('',#121259,1.); +#121259 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121260 = PLANE('',#121261); +#121261 = AXIS2_PLACEMENT_3D('',#121262,#121263,#121264); +#121262 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#121263 = DIRECTION('',(0.,0.,1.)); +#121264 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121265 = ADVANCED_FACE('',(#121266),#121277,.T.); +#121266 = FACE_BOUND('',#121267,.T.); +#121267 = EDGE_LOOP('',(#121268,#121269,#121275,#121276)); +#121268 = ORIENTED_EDGE('',*,*,#118953,.T.); +#121269 = ORIENTED_EDGE('',*,*,#121270,.F.); +#121270 = EDGE_CURVE('',#118898,#118954,#121271,.T.); +#121271 = LINE('',#121272,#121273); +#121272 = CARTESIAN_POINT('',(-0.1,-17.78,0.9)); +#121273 = VECTOR('',#121274,1.); +#121274 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121275 = ORIENTED_EDGE('',*,*,#118905,.T.); +#121276 = ORIENTED_EDGE('',*,*,#118928,.T.); +#121277 = PLANE('',#121278); +#121278 = AXIS2_PLACEMENT_3D('',#121279,#121280,#121281); +#121279 = CARTESIAN_POINT('',(-2.067651605486E-15,-17.78,0.9)); +#121280 = DIRECTION('',(0.,0.,1.)); +#121281 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121282 = ADVANCED_FACE('',(#121283),#121326,.T.); +#121283 = FACE_BOUND('',#121284,.T.); +#121284 = EDGE_LOOP('',(#121285,#121286,#121294,#121302,#121310,#121318, + #121324,#121325)); +#121285 = ORIENTED_EDGE('',*,*,#118961,.F.); +#121286 = ORIENTED_EDGE('',*,*,#121287,.T.); +#121287 = EDGE_CURVE('',#118962,#121288,#121290,.T.); +#121288 = VERTEX_POINT('',#121289); +#121289 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#121290 = LINE('',#121291,#121292); +#121291 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#121292 = VECTOR('',#121293,1.); +#121293 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121294 = ORIENTED_EDGE('',*,*,#121295,.T.); +#121295 = EDGE_CURVE('',#121288,#121296,#121298,.T.); +#121296 = VERTEX_POINT('',#121297); +#121297 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#121298 = LINE('',#121299,#121300); +#121299 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#121300 = VECTOR('',#121301,1.); +#121301 = DIRECTION('',(0.,0.,-1.)); +#121302 = ORIENTED_EDGE('',*,*,#121303,.T.); +#121303 = EDGE_CURVE('',#121296,#121304,#121306,.T.); +#121304 = VERTEX_POINT('',#121305); +#121305 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#121306 = LINE('',#121307,#121308); +#121307 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#121308 = VECTOR('',#121309,1.); +#121309 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121310 = ORIENTED_EDGE('',*,*,#121311,.T.); +#121311 = EDGE_CURVE('',#121304,#121312,#121314,.T.); +#121312 = VERTEX_POINT('',#121313); +#121313 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121314 = LINE('',#121315,#121316); +#121315 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#121316 = VECTOR('',#121317,1.); +#121317 = DIRECTION('',(0.,0.,1.)); +#121318 = ORIENTED_EDGE('',*,*,#121319,.T.); +#121319 = EDGE_CURVE('',#121312,#118890,#121320,.T.); +#121320 = LINE('',#121321,#121322); +#121321 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121322 = VECTOR('',#121323,1.); +#121323 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121324 = ORIENTED_EDGE('',*,*,#118897,.F.); +#121325 = ORIENTED_EDGE('',*,*,#121270,.T.); +#121326 = PLANE('',#121327); +#121327 = AXIS2_PLACEMENT_3D('',#121328,#121329,#121330); +#121328 = CARTESIAN_POINT('',(-0.1,-17.78,3.911477598424)); +#121329 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121330 = DIRECTION('',(0.,0.,1.)); +#121331 = ADVANCED_FACE('',(#121332),#121350,.T.); +#121332 = FACE_BOUND('',#121333,.T.); +#121333 = EDGE_LOOP('',(#121334,#121342,#121348,#121349)); +#121334 = ORIENTED_EDGE('',*,*,#121335,.T.); +#121335 = EDGE_CURVE('',#121312,#121336,#121338,.T.); +#121336 = VERTEX_POINT('',#121337); +#121337 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#121338 = LINE('',#121339,#121340); +#121339 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121340 = VECTOR('',#121341,1.); +#121341 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121342 = ORIENTED_EDGE('',*,*,#121343,.T.); +#121343 = EDGE_CURVE('',#121336,#118882,#121344,.T.); +#121344 = LINE('',#121345,#121346); +#121345 = CARTESIAN_POINT('',(0.1,-17.53,7.35)); +#121346 = VECTOR('',#121347,1.); +#121347 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121348 = ORIENTED_EDGE('',*,*,#118889,.F.); +#121349 = ORIENTED_EDGE('',*,*,#121319,.F.); +#121350 = PLANE('',#121351); +#121351 = AXIS2_PLACEMENT_3D('',#121352,#121353,#121354); +#121352 = CARTESIAN_POINT('',(-0.1,-17.53,7.35)); +#121353 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121354 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121355 = ADVANCED_FACE('',(#121356),#121392,.F.); +#121356 = FACE_BOUND('',#121357,.F.); +#121357 = EDGE_LOOP('',(#121358,#121359,#121367,#121375,#121383,#121389, + #121390,#121391)); +#121358 = ORIENTED_EDGE('',*,*,#118977,.F.); +#121359 = ORIENTED_EDGE('',*,*,#121360,.T.); +#121360 = EDGE_CURVE('',#118970,#121361,#121363,.T.); +#121361 = VERTEX_POINT('',#121362); +#121362 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#121363 = LINE('',#121364,#121365); +#121364 = CARTESIAN_POINT('',(0.1,-18.08,7.4)); +#121365 = VECTOR('',#121366,1.); +#121366 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121367 = ORIENTED_EDGE('',*,*,#121368,.T.); +#121368 = EDGE_CURVE('',#121361,#121369,#121371,.T.); +#121369 = VERTEX_POINT('',#121370); +#121370 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#121371 = LINE('',#121372,#121373); +#121372 = CARTESIAN_POINT('',(0.1,-18.03,7.35)); +#121373 = VECTOR('',#121374,1.); +#121374 = DIRECTION('',(0.,0.,-1.)); +#121375 = ORIENTED_EDGE('',*,*,#121376,.T.); +#121376 = EDGE_CURVE('',#121369,#121377,#121379,.T.); +#121377 = VERTEX_POINT('',#121378); +#121378 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#121379 = LINE('',#121380,#121381); +#121380 = CARTESIAN_POINT('',(0.1,-18.03,1.25)); +#121381 = VECTOR('',#121382,1.); +#121382 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121383 = ORIENTED_EDGE('',*,*,#121384,.T.); +#121384 = EDGE_CURVE('',#121377,#121336,#121385,.T.); +#121385 = LINE('',#121386,#121387); +#121386 = CARTESIAN_POINT('',(0.1,-17.53,1.25)); +#121387 = VECTOR('',#121388,1.); +#121388 = DIRECTION('',(0.,0.,1.)); +#121389 = ORIENTED_EDGE('',*,*,#121343,.T.); +#121390 = ORIENTED_EDGE('',*,*,#118881,.F.); +#121391 = ORIENTED_EDGE('',*,*,#121255,.T.); +#121392 = PLANE('',#121393); +#121393 = AXIS2_PLACEMENT_3D('',#121394,#121395,#121396); +#121394 = CARTESIAN_POINT('',(0.1,-17.78,3.911477598424)); +#121395 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121396 = DIRECTION('',(0.,0.,1.)); +#121397 = ADVANCED_FACE('',(#121398),#121409,.T.); +#121398 = FACE_BOUND('',#121399,.T.); +#121399 = EDGE_LOOP('',(#121400,#121401,#121402,#121408)); +#121400 = ORIENTED_EDGE('',*,*,#118969,.T.); +#121401 = ORIENTED_EDGE('',*,*,#121360,.T.); +#121402 = ORIENTED_EDGE('',*,*,#121403,.F.); +#121403 = EDGE_CURVE('',#121288,#121361,#121404,.T.); +#121404 = LINE('',#121405,#121406); +#121405 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#121406 = VECTOR('',#121407,1.); +#121407 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121408 = ORIENTED_EDGE('',*,*,#121287,.F.); +#121409 = PLANE('',#121410); +#121410 = AXIS2_PLACEMENT_3D('',#121411,#121412,#121413); +#121411 = CARTESIAN_POINT('',(-0.1,-18.08,7.4)); +#121412 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121413 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121414 = ADVANCED_FACE('',(#121415),#121426,.T.); +#121415 = FACE_BOUND('',#121416,.T.); +#121416 = EDGE_LOOP('',(#121417,#121418,#121419,#121420)); +#121417 = ORIENTED_EDGE('',*,*,#119145,.T.); +#121418 = ORIENTED_EDGE('',*,*,#119008,.T.); +#121419 = ORIENTED_EDGE('',*,*,#119033,.T.); +#121420 = ORIENTED_EDGE('',*,*,#121421,.T.); +#121421 = EDGE_CURVE('',#119034,#119138,#121422,.T.); +#121422 = LINE('',#121423,#121424); +#121423 = CARTESIAN_POINT('',(0.1,-15.24,0.9)); +#121424 = VECTOR('',#121425,1.); +#121425 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121426 = PLANE('',#121427); +#121427 = AXIS2_PLACEMENT_3D('',#121428,#121429,#121430); +#121428 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#121429 = DIRECTION('',(0.,0.,1.)); +#121430 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121431 = ADVANCED_FACE('',(#121432),#121443,.T.); +#121432 = FACE_BOUND('',#121433,.T.); +#121433 = EDGE_LOOP('',(#121434,#121435,#121441,#121442)); +#121434 = ORIENTED_EDGE('',*,*,#119113,.T.); +#121435 = ORIENTED_EDGE('',*,*,#121436,.F.); +#121436 = EDGE_CURVE('',#119058,#119114,#121437,.T.); +#121437 = LINE('',#121438,#121439); +#121438 = CARTESIAN_POINT('',(-0.1,-15.24,0.9)); +#121439 = VECTOR('',#121440,1.); +#121440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121441 = ORIENTED_EDGE('',*,*,#119065,.T.); +#121442 = ORIENTED_EDGE('',*,*,#119088,.T.); +#121443 = PLANE('',#121444); +#121444 = AXIS2_PLACEMENT_3D('',#121445,#121446,#121447); +#121445 = CARTESIAN_POINT('',(-1.785654957231E-15,-15.24,0.9)); +#121446 = DIRECTION('',(0.,0.,1.)); +#121447 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121448 = ADVANCED_FACE('',(#121449),#121492,.T.); +#121449 = FACE_BOUND('',#121450,.T.); +#121450 = EDGE_LOOP('',(#121451,#121452,#121460,#121468,#121476,#121484, + #121490,#121491)); +#121451 = ORIENTED_EDGE('',*,*,#119121,.F.); +#121452 = ORIENTED_EDGE('',*,*,#121453,.T.); +#121453 = EDGE_CURVE('',#119122,#121454,#121456,.T.); +#121454 = VERTEX_POINT('',#121455); +#121455 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#121456 = LINE('',#121457,#121458); +#121457 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#121458 = VECTOR('',#121459,1.); +#121459 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121460 = ORIENTED_EDGE('',*,*,#121461,.T.); +#121461 = EDGE_CURVE('',#121454,#121462,#121464,.T.); +#121462 = VERTEX_POINT('',#121463); +#121463 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#121464 = LINE('',#121465,#121466); +#121465 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#121466 = VECTOR('',#121467,1.); +#121467 = DIRECTION('',(0.,0.,-1.)); +#121468 = ORIENTED_EDGE('',*,*,#121469,.T.); +#121469 = EDGE_CURVE('',#121462,#121470,#121472,.T.); +#121470 = VERTEX_POINT('',#121471); +#121471 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#121472 = LINE('',#121473,#121474); +#121473 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#121474 = VECTOR('',#121475,1.); +#121475 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121476 = ORIENTED_EDGE('',*,*,#121477,.T.); +#121477 = EDGE_CURVE('',#121470,#121478,#121480,.T.); +#121478 = VERTEX_POINT('',#121479); +#121479 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121480 = LINE('',#121481,#121482); +#121481 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#121482 = VECTOR('',#121483,1.); +#121483 = DIRECTION('',(0.,0.,1.)); +#121484 = ORIENTED_EDGE('',*,*,#121485,.T.); +#121485 = EDGE_CURVE('',#121478,#119050,#121486,.T.); +#121486 = LINE('',#121487,#121488); +#121487 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121488 = VECTOR('',#121489,1.); +#121489 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121490 = ORIENTED_EDGE('',*,*,#119057,.F.); +#121491 = ORIENTED_EDGE('',*,*,#121436,.T.); +#121492 = PLANE('',#121493); +#121493 = AXIS2_PLACEMENT_3D('',#121494,#121495,#121496); +#121494 = CARTESIAN_POINT('',(-0.1,-15.24,3.911477598424)); +#121495 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121496 = DIRECTION('',(0.,0.,1.)); +#121497 = ADVANCED_FACE('',(#121498),#121516,.T.); +#121498 = FACE_BOUND('',#121499,.T.); +#121499 = EDGE_LOOP('',(#121500,#121508,#121514,#121515)); +#121500 = ORIENTED_EDGE('',*,*,#121501,.T.); +#121501 = EDGE_CURVE('',#121478,#121502,#121504,.T.); +#121502 = VERTEX_POINT('',#121503); +#121503 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#121504 = LINE('',#121505,#121506); +#121505 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121506 = VECTOR('',#121507,1.); +#121507 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121508 = ORIENTED_EDGE('',*,*,#121509,.T.); +#121509 = EDGE_CURVE('',#121502,#119042,#121510,.T.); +#121510 = LINE('',#121511,#121512); +#121511 = CARTESIAN_POINT('',(0.1,-14.99,7.35)); +#121512 = VECTOR('',#121513,1.); +#121513 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121514 = ORIENTED_EDGE('',*,*,#119049,.F.); +#121515 = ORIENTED_EDGE('',*,*,#121485,.F.); +#121516 = PLANE('',#121517); +#121517 = AXIS2_PLACEMENT_3D('',#121518,#121519,#121520); +#121518 = CARTESIAN_POINT('',(-0.1,-14.99,7.35)); +#121519 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121520 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121521 = ADVANCED_FACE('',(#121522),#121558,.F.); +#121522 = FACE_BOUND('',#121523,.F.); +#121523 = EDGE_LOOP('',(#121524,#121525,#121533,#121541,#121549,#121555, + #121556,#121557)); +#121524 = ORIENTED_EDGE('',*,*,#119137,.F.); +#121525 = ORIENTED_EDGE('',*,*,#121526,.T.); +#121526 = EDGE_CURVE('',#119130,#121527,#121529,.T.); +#121527 = VERTEX_POINT('',#121528); +#121528 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#121529 = LINE('',#121530,#121531); +#121530 = CARTESIAN_POINT('',(0.1,-15.54,7.4)); +#121531 = VECTOR('',#121532,1.); +#121532 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121533 = ORIENTED_EDGE('',*,*,#121534,.T.); +#121534 = EDGE_CURVE('',#121527,#121535,#121537,.T.); +#121535 = VERTEX_POINT('',#121536); +#121536 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#121537 = LINE('',#121538,#121539); +#121538 = CARTESIAN_POINT('',(0.1,-15.49,7.35)); +#121539 = VECTOR('',#121540,1.); +#121540 = DIRECTION('',(0.,0.,-1.)); +#121541 = ORIENTED_EDGE('',*,*,#121542,.T.); +#121542 = EDGE_CURVE('',#121535,#121543,#121545,.T.); +#121543 = VERTEX_POINT('',#121544); +#121544 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#121545 = LINE('',#121546,#121547); +#121546 = CARTESIAN_POINT('',(0.1,-15.49,1.25)); +#121547 = VECTOR('',#121548,1.); +#121548 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121549 = ORIENTED_EDGE('',*,*,#121550,.T.); +#121550 = EDGE_CURVE('',#121543,#121502,#121551,.T.); +#121551 = LINE('',#121552,#121553); +#121552 = CARTESIAN_POINT('',(0.1,-14.99,1.25)); +#121553 = VECTOR('',#121554,1.); +#121554 = DIRECTION('',(0.,0.,1.)); +#121555 = ORIENTED_EDGE('',*,*,#121509,.T.); +#121556 = ORIENTED_EDGE('',*,*,#119041,.F.); +#121557 = ORIENTED_EDGE('',*,*,#121421,.T.); +#121558 = PLANE('',#121559); +#121559 = AXIS2_PLACEMENT_3D('',#121560,#121561,#121562); +#121560 = CARTESIAN_POINT('',(0.1,-15.24,3.911477598424)); +#121561 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121562 = DIRECTION('',(0.,0.,1.)); +#121563 = ADVANCED_FACE('',(#121564),#121575,.T.); +#121564 = FACE_BOUND('',#121565,.T.); +#121565 = EDGE_LOOP('',(#121566,#121567,#121568,#121574)); +#121566 = ORIENTED_EDGE('',*,*,#119129,.T.); +#121567 = ORIENTED_EDGE('',*,*,#121526,.T.); +#121568 = ORIENTED_EDGE('',*,*,#121569,.F.); +#121569 = EDGE_CURVE('',#121454,#121527,#121570,.T.); +#121570 = LINE('',#121571,#121572); +#121571 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#121572 = VECTOR('',#121573,1.); +#121573 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121574 = ORIENTED_EDGE('',*,*,#121453,.F.); +#121575 = PLANE('',#121576); +#121576 = AXIS2_PLACEMENT_3D('',#121577,#121578,#121579); +#121577 = CARTESIAN_POINT('',(-0.1,-15.54,7.4)); +#121578 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121579 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121580 = ADVANCED_FACE('',(#121581),#121592,.T.); +#121581 = FACE_BOUND('',#121582,.T.); +#121582 = EDGE_LOOP('',(#121583,#121584,#121585,#121586)); +#121583 = ORIENTED_EDGE('',*,*,#119305,.T.); +#121584 = ORIENTED_EDGE('',*,*,#119168,.T.); +#121585 = ORIENTED_EDGE('',*,*,#119193,.T.); +#121586 = ORIENTED_EDGE('',*,*,#121587,.T.); +#121587 = EDGE_CURVE('',#119194,#119298,#121588,.T.); +#121588 = LINE('',#121589,#121590); +#121589 = CARTESIAN_POINT('',(0.1,-12.7,0.9)); +#121590 = VECTOR('',#121591,1.); +#121591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121592 = PLANE('',#121593); +#121593 = AXIS2_PLACEMENT_3D('',#121594,#121595,#121596); +#121594 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#121595 = DIRECTION('',(0.,0.,1.)); +#121596 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121597 = ADVANCED_FACE('',(#121598),#121609,.T.); +#121598 = FACE_BOUND('',#121599,.T.); +#121599 = EDGE_LOOP('',(#121600,#121601,#121607,#121608)); +#121600 = ORIENTED_EDGE('',*,*,#119273,.T.); +#121601 = ORIENTED_EDGE('',*,*,#121602,.F.); +#121602 = EDGE_CURVE('',#119218,#119274,#121603,.T.); +#121603 = LINE('',#121604,#121605); +#121604 = CARTESIAN_POINT('',(-0.1,-12.7,0.9)); +#121605 = VECTOR('',#121606,1.); +#121606 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121607 = ORIENTED_EDGE('',*,*,#119225,.T.); +#121608 = ORIENTED_EDGE('',*,*,#119248,.T.); +#121609 = PLANE('',#121610); +#121610 = AXIS2_PLACEMENT_3D('',#121611,#121612,#121613); +#121611 = CARTESIAN_POINT('',(-1.503658308977E-15,-12.7,0.9)); +#121612 = DIRECTION('',(0.,0.,1.)); +#121613 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121614 = ADVANCED_FACE('',(#121615),#121658,.T.); +#121615 = FACE_BOUND('',#121616,.T.); +#121616 = EDGE_LOOP('',(#121617,#121618,#121626,#121634,#121642,#121650, + #121656,#121657)); +#121617 = ORIENTED_EDGE('',*,*,#119281,.F.); +#121618 = ORIENTED_EDGE('',*,*,#121619,.T.); +#121619 = EDGE_CURVE('',#119282,#121620,#121622,.T.); +#121620 = VERTEX_POINT('',#121621); +#121621 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#121622 = LINE('',#121623,#121624); +#121623 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#121624 = VECTOR('',#121625,1.); +#121625 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121626 = ORIENTED_EDGE('',*,*,#121627,.T.); +#121627 = EDGE_CURVE('',#121620,#121628,#121630,.T.); +#121628 = VERTEX_POINT('',#121629); +#121629 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#121630 = LINE('',#121631,#121632); +#121631 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#121632 = VECTOR('',#121633,1.); +#121633 = DIRECTION('',(0.,0.,-1.)); +#121634 = ORIENTED_EDGE('',*,*,#121635,.T.); +#121635 = EDGE_CURVE('',#121628,#121636,#121638,.T.); +#121636 = VERTEX_POINT('',#121637); +#121637 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#121638 = LINE('',#121639,#121640); +#121639 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#121640 = VECTOR('',#121641,1.); +#121641 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121642 = ORIENTED_EDGE('',*,*,#121643,.T.); +#121643 = EDGE_CURVE('',#121636,#121644,#121646,.T.); +#121644 = VERTEX_POINT('',#121645); +#121645 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121646 = LINE('',#121647,#121648); +#121647 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#121648 = VECTOR('',#121649,1.); +#121649 = DIRECTION('',(0.,0.,1.)); +#121650 = ORIENTED_EDGE('',*,*,#121651,.T.); +#121651 = EDGE_CURVE('',#121644,#119210,#121652,.T.); +#121652 = LINE('',#121653,#121654); +#121653 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121654 = VECTOR('',#121655,1.); +#121655 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121656 = ORIENTED_EDGE('',*,*,#119217,.F.); +#121657 = ORIENTED_EDGE('',*,*,#121602,.T.); +#121658 = PLANE('',#121659); +#121659 = AXIS2_PLACEMENT_3D('',#121660,#121661,#121662); +#121660 = CARTESIAN_POINT('',(-0.1,-12.7,3.911477598424)); +#121661 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121662 = DIRECTION('',(0.,0.,1.)); +#121663 = ADVANCED_FACE('',(#121664),#121682,.T.); +#121664 = FACE_BOUND('',#121665,.T.); +#121665 = EDGE_LOOP('',(#121666,#121674,#121680,#121681)); +#121666 = ORIENTED_EDGE('',*,*,#121667,.T.); +#121667 = EDGE_CURVE('',#121644,#121668,#121670,.T.); +#121668 = VERTEX_POINT('',#121669); +#121669 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#121670 = LINE('',#121671,#121672); +#121671 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121672 = VECTOR('',#121673,1.); +#121673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121674 = ORIENTED_EDGE('',*,*,#121675,.T.); +#121675 = EDGE_CURVE('',#121668,#119202,#121676,.T.); +#121676 = LINE('',#121677,#121678); +#121677 = CARTESIAN_POINT('',(0.1,-12.45,7.35)); +#121678 = VECTOR('',#121679,1.); +#121679 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121680 = ORIENTED_EDGE('',*,*,#119209,.F.); +#121681 = ORIENTED_EDGE('',*,*,#121651,.F.); +#121682 = PLANE('',#121683); +#121683 = AXIS2_PLACEMENT_3D('',#121684,#121685,#121686); +#121684 = CARTESIAN_POINT('',(-0.1,-12.45,7.35)); +#121685 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121686 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121687 = ADVANCED_FACE('',(#121688),#121724,.F.); +#121688 = FACE_BOUND('',#121689,.F.); +#121689 = EDGE_LOOP('',(#121690,#121691,#121699,#121707,#121715,#121721, + #121722,#121723)); +#121690 = ORIENTED_EDGE('',*,*,#119297,.F.); +#121691 = ORIENTED_EDGE('',*,*,#121692,.T.); +#121692 = EDGE_CURVE('',#119290,#121693,#121695,.T.); +#121693 = VERTEX_POINT('',#121694); +#121694 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#121695 = LINE('',#121696,#121697); +#121696 = CARTESIAN_POINT('',(0.1,-13.,7.4)); +#121697 = VECTOR('',#121698,1.); +#121698 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121699 = ORIENTED_EDGE('',*,*,#121700,.T.); +#121700 = EDGE_CURVE('',#121693,#121701,#121703,.T.); +#121701 = VERTEX_POINT('',#121702); +#121702 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#121703 = LINE('',#121704,#121705); +#121704 = CARTESIAN_POINT('',(0.1,-12.95,7.35)); +#121705 = VECTOR('',#121706,1.); +#121706 = DIRECTION('',(0.,0.,-1.)); +#121707 = ORIENTED_EDGE('',*,*,#121708,.T.); +#121708 = EDGE_CURVE('',#121701,#121709,#121711,.T.); +#121709 = VERTEX_POINT('',#121710); +#121710 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#121711 = LINE('',#121712,#121713); +#121712 = CARTESIAN_POINT('',(0.1,-12.95,1.25)); +#121713 = VECTOR('',#121714,1.); +#121714 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121715 = ORIENTED_EDGE('',*,*,#121716,.T.); +#121716 = EDGE_CURVE('',#121709,#121668,#121717,.T.); +#121717 = LINE('',#121718,#121719); +#121718 = CARTESIAN_POINT('',(0.1,-12.45,1.25)); +#121719 = VECTOR('',#121720,1.); +#121720 = DIRECTION('',(0.,0.,1.)); +#121721 = ORIENTED_EDGE('',*,*,#121675,.T.); +#121722 = ORIENTED_EDGE('',*,*,#119201,.F.); +#121723 = ORIENTED_EDGE('',*,*,#121587,.T.); +#121724 = PLANE('',#121725); +#121725 = AXIS2_PLACEMENT_3D('',#121726,#121727,#121728); +#121726 = CARTESIAN_POINT('',(0.1,-12.7,3.911477598424)); +#121727 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121728 = DIRECTION('',(0.,0.,1.)); +#121729 = ADVANCED_FACE('',(#121730),#121741,.T.); +#121730 = FACE_BOUND('',#121731,.T.); +#121731 = EDGE_LOOP('',(#121732,#121733,#121734,#121740)); +#121732 = ORIENTED_EDGE('',*,*,#119289,.T.); +#121733 = ORIENTED_EDGE('',*,*,#121692,.T.); +#121734 = ORIENTED_EDGE('',*,*,#121735,.F.); +#121735 = EDGE_CURVE('',#121620,#121693,#121736,.T.); +#121736 = LINE('',#121737,#121738); +#121737 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#121738 = VECTOR('',#121739,1.); +#121739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121740 = ORIENTED_EDGE('',*,*,#121619,.F.); +#121741 = PLANE('',#121742); +#121742 = AXIS2_PLACEMENT_3D('',#121743,#121744,#121745); +#121743 = CARTESIAN_POINT('',(-0.1,-13.,7.4)); +#121744 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121745 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121746 = ADVANCED_FACE('',(#121747),#121758,.T.); +#121747 = FACE_BOUND('',#121748,.T.); +#121748 = EDGE_LOOP('',(#121749,#121750,#121751,#121752)); +#121749 = ORIENTED_EDGE('',*,*,#119465,.T.); +#121750 = ORIENTED_EDGE('',*,*,#119328,.T.); +#121751 = ORIENTED_EDGE('',*,*,#119353,.T.); +#121752 = ORIENTED_EDGE('',*,*,#121753,.T.); +#121753 = EDGE_CURVE('',#119354,#119458,#121754,.T.); +#121754 = LINE('',#121755,#121756); +#121755 = CARTESIAN_POINT('',(0.1,-10.16,0.9)); +#121756 = VECTOR('',#121757,1.); +#121757 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121758 = PLANE('',#121759); +#121759 = AXIS2_PLACEMENT_3D('',#121760,#121761,#121762); +#121760 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#121761 = DIRECTION('',(0.,0.,1.)); +#121762 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121763 = ADVANCED_FACE('',(#121764),#121775,.T.); +#121764 = FACE_BOUND('',#121765,.T.); +#121765 = EDGE_LOOP('',(#121766,#121767,#121773,#121774)); +#121766 = ORIENTED_EDGE('',*,*,#119433,.T.); +#121767 = ORIENTED_EDGE('',*,*,#121768,.F.); +#121768 = EDGE_CURVE('',#119378,#119434,#121769,.T.); +#121769 = LINE('',#121770,#121771); +#121770 = CARTESIAN_POINT('',(-0.1,-10.16,0.9)); +#121771 = VECTOR('',#121772,1.); +#121772 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121773 = ORIENTED_EDGE('',*,*,#119385,.T.); +#121774 = ORIENTED_EDGE('',*,*,#119408,.T.); +#121775 = PLANE('',#121776); +#121776 = AXIS2_PLACEMENT_3D('',#121777,#121778,#121779); +#121777 = CARTESIAN_POINT('',(-1.221661660722E-15,-10.16,0.9)); +#121778 = DIRECTION('',(0.,0.,1.)); +#121779 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121780 = ADVANCED_FACE('',(#121781),#121824,.T.); +#121781 = FACE_BOUND('',#121782,.T.); +#121782 = EDGE_LOOP('',(#121783,#121784,#121792,#121800,#121808,#121816, + #121822,#121823)); +#121783 = ORIENTED_EDGE('',*,*,#119441,.F.); +#121784 = ORIENTED_EDGE('',*,*,#121785,.T.); +#121785 = EDGE_CURVE('',#119442,#121786,#121788,.T.); +#121786 = VERTEX_POINT('',#121787); +#121787 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#121788 = LINE('',#121789,#121790); +#121789 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#121790 = VECTOR('',#121791,1.); +#121791 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121792 = ORIENTED_EDGE('',*,*,#121793,.T.); +#121793 = EDGE_CURVE('',#121786,#121794,#121796,.T.); +#121794 = VERTEX_POINT('',#121795); +#121795 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#121796 = LINE('',#121797,#121798); +#121797 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#121798 = VECTOR('',#121799,1.); +#121799 = DIRECTION('',(0.,0.,-1.)); +#121800 = ORIENTED_EDGE('',*,*,#121801,.T.); +#121801 = EDGE_CURVE('',#121794,#121802,#121804,.T.); +#121802 = VERTEX_POINT('',#121803); +#121803 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#121804 = LINE('',#121805,#121806); +#121805 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#121806 = VECTOR('',#121807,1.); +#121807 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121808 = ORIENTED_EDGE('',*,*,#121809,.T.); +#121809 = EDGE_CURVE('',#121802,#121810,#121812,.T.); +#121810 = VERTEX_POINT('',#121811); +#121811 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121812 = LINE('',#121813,#121814); +#121813 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#121814 = VECTOR('',#121815,1.); +#121815 = DIRECTION('',(0.,0.,1.)); +#121816 = ORIENTED_EDGE('',*,*,#121817,.T.); +#121817 = EDGE_CURVE('',#121810,#119370,#121818,.T.); +#121818 = LINE('',#121819,#121820); +#121819 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121820 = VECTOR('',#121821,1.); +#121821 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121822 = ORIENTED_EDGE('',*,*,#119377,.F.); +#121823 = ORIENTED_EDGE('',*,*,#121768,.T.); +#121824 = PLANE('',#121825); +#121825 = AXIS2_PLACEMENT_3D('',#121826,#121827,#121828); +#121826 = CARTESIAN_POINT('',(-0.1,-10.16,3.911477598424)); +#121827 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121828 = DIRECTION('',(0.,0.,1.)); +#121829 = ADVANCED_FACE('',(#121830),#121848,.T.); +#121830 = FACE_BOUND('',#121831,.T.); +#121831 = EDGE_LOOP('',(#121832,#121840,#121846,#121847)); +#121832 = ORIENTED_EDGE('',*,*,#121833,.T.); +#121833 = EDGE_CURVE('',#121810,#121834,#121836,.T.); +#121834 = VERTEX_POINT('',#121835); +#121835 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#121836 = LINE('',#121837,#121838); +#121837 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121838 = VECTOR('',#121839,1.); +#121839 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121840 = ORIENTED_EDGE('',*,*,#121841,.T.); +#121841 = EDGE_CURVE('',#121834,#119362,#121842,.T.); +#121842 = LINE('',#121843,#121844); +#121843 = CARTESIAN_POINT('',(0.1,-9.91,7.35)); +#121844 = VECTOR('',#121845,1.); +#121845 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121846 = ORIENTED_EDGE('',*,*,#119369,.F.); +#121847 = ORIENTED_EDGE('',*,*,#121817,.F.); +#121848 = PLANE('',#121849); +#121849 = AXIS2_PLACEMENT_3D('',#121850,#121851,#121852); +#121850 = CARTESIAN_POINT('',(-0.1,-9.91,7.35)); +#121851 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#121852 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121853 = ADVANCED_FACE('',(#121854),#121890,.F.); +#121854 = FACE_BOUND('',#121855,.F.); +#121855 = EDGE_LOOP('',(#121856,#121857,#121865,#121873,#121881,#121887, + #121888,#121889)); +#121856 = ORIENTED_EDGE('',*,*,#119457,.F.); +#121857 = ORIENTED_EDGE('',*,*,#121858,.T.); +#121858 = EDGE_CURVE('',#119450,#121859,#121861,.T.); +#121859 = VERTEX_POINT('',#121860); +#121860 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#121861 = LINE('',#121862,#121863); +#121862 = CARTESIAN_POINT('',(0.1,-10.46,7.4)); +#121863 = VECTOR('',#121864,1.); +#121864 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121865 = ORIENTED_EDGE('',*,*,#121866,.T.); +#121866 = EDGE_CURVE('',#121859,#121867,#121869,.T.); +#121867 = VERTEX_POINT('',#121868); +#121868 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#121869 = LINE('',#121870,#121871); +#121870 = CARTESIAN_POINT('',(0.1,-10.41,7.35)); +#121871 = VECTOR('',#121872,1.); +#121872 = DIRECTION('',(0.,0.,-1.)); +#121873 = ORIENTED_EDGE('',*,*,#121874,.T.); +#121874 = EDGE_CURVE('',#121867,#121875,#121877,.T.); +#121875 = VERTEX_POINT('',#121876); +#121876 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#121877 = LINE('',#121878,#121879); +#121878 = CARTESIAN_POINT('',(0.1,-10.41,1.25)); +#121879 = VECTOR('',#121880,1.); +#121880 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121881 = ORIENTED_EDGE('',*,*,#121882,.T.); +#121882 = EDGE_CURVE('',#121875,#121834,#121883,.T.); +#121883 = LINE('',#121884,#121885); +#121884 = CARTESIAN_POINT('',(0.1,-9.91,1.25)); +#121885 = VECTOR('',#121886,1.); +#121886 = DIRECTION('',(0.,0.,1.)); +#121887 = ORIENTED_EDGE('',*,*,#121841,.T.); +#121888 = ORIENTED_EDGE('',*,*,#119361,.F.); +#121889 = ORIENTED_EDGE('',*,*,#121753,.T.); +#121890 = PLANE('',#121891); +#121891 = AXIS2_PLACEMENT_3D('',#121892,#121893,#121894); +#121892 = CARTESIAN_POINT('',(0.1,-10.16,3.911477598424)); +#121893 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121894 = DIRECTION('',(0.,0.,1.)); +#121895 = ADVANCED_FACE('',(#121896),#121907,.T.); +#121896 = FACE_BOUND('',#121897,.T.); +#121897 = EDGE_LOOP('',(#121898,#121899,#121900,#121906)); +#121898 = ORIENTED_EDGE('',*,*,#119449,.T.); +#121899 = ORIENTED_EDGE('',*,*,#121858,.T.); +#121900 = ORIENTED_EDGE('',*,*,#121901,.F.); +#121901 = EDGE_CURVE('',#121786,#121859,#121902,.T.); +#121902 = LINE('',#121903,#121904); +#121903 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#121904 = VECTOR('',#121905,1.); +#121905 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#121906 = ORIENTED_EDGE('',*,*,#121785,.F.); +#121907 = PLANE('',#121908); +#121908 = AXIS2_PLACEMENT_3D('',#121909,#121910,#121911); +#121909 = CARTESIAN_POINT('',(-0.1,-10.46,7.4)); +#121910 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121911 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121912 = ADVANCED_FACE('',(#121913),#121924,.T.); +#121913 = FACE_BOUND('',#121914,.T.); +#121914 = EDGE_LOOP('',(#121915,#121916,#121917,#121918)); +#121915 = ORIENTED_EDGE('',*,*,#119625,.T.); +#121916 = ORIENTED_EDGE('',*,*,#119488,.T.); +#121917 = ORIENTED_EDGE('',*,*,#119513,.T.); +#121918 = ORIENTED_EDGE('',*,*,#121919,.T.); +#121919 = EDGE_CURVE('',#119514,#119618,#121920,.T.); +#121920 = LINE('',#121921,#121922); +#121921 = CARTESIAN_POINT('',(0.1,-7.62,0.9)); +#121922 = VECTOR('',#121923,1.); +#121923 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121924 = PLANE('',#121925); +#121925 = AXIS2_PLACEMENT_3D('',#121926,#121927,#121928); +#121926 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#121927 = DIRECTION('',(0.,0.,1.)); +#121928 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121929 = ADVANCED_FACE('',(#121930),#121941,.T.); +#121930 = FACE_BOUND('',#121931,.T.); +#121931 = EDGE_LOOP('',(#121932,#121933,#121939,#121940)); +#121932 = ORIENTED_EDGE('',*,*,#119593,.T.); +#121933 = ORIENTED_EDGE('',*,*,#121934,.F.); +#121934 = EDGE_CURVE('',#119538,#119594,#121935,.T.); +#121935 = LINE('',#121936,#121937); +#121936 = CARTESIAN_POINT('',(-0.1,-7.62,0.9)); +#121937 = VECTOR('',#121938,1.); +#121938 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#121939 = ORIENTED_EDGE('',*,*,#119545,.T.); +#121940 = ORIENTED_EDGE('',*,*,#119568,.T.); +#121941 = PLANE('',#121942); +#121942 = AXIS2_PLACEMENT_3D('',#121943,#121944,#121945); +#121943 = CARTESIAN_POINT('',(-9.396650124671E-16,-7.62,0.9)); +#121944 = DIRECTION('',(0.,0.,1.)); +#121945 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#121946 = ADVANCED_FACE('',(#121947),#121990,.T.); +#121947 = FACE_BOUND('',#121948,.T.); +#121948 = EDGE_LOOP('',(#121949,#121950,#121958,#121966,#121974,#121982, + #121988,#121989)); +#121949 = ORIENTED_EDGE('',*,*,#119601,.F.); +#121950 = ORIENTED_EDGE('',*,*,#121951,.T.); +#121951 = EDGE_CURVE('',#119602,#121952,#121954,.T.); +#121952 = VERTEX_POINT('',#121953); +#121953 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#121954 = LINE('',#121955,#121956); +#121955 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#121956 = VECTOR('',#121957,1.); +#121957 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#121958 = ORIENTED_EDGE('',*,*,#121959,.T.); +#121959 = EDGE_CURVE('',#121952,#121960,#121962,.T.); +#121960 = VERTEX_POINT('',#121961); +#121961 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#121962 = LINE('',#121963,#121964); +#121963 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#121964 = VECTOR('',#121965,1.); +#121965 = DIRECTION('',(0.,0.,-1.)); +#121966 = ORIENTED_EDGE('',*,*,#121967,.T.); +#121967 = EDGE_CURVE('',#121960,#121968,#121970,.T.); +#121968 = VERTEX_POINT('',#121969); +#121969 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#121970 = LINE('',#121971,#121972); +#121971 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#121972 = VECTOR('',#121973,1.); +#121973 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#121974 = ORIENTED_EDGE('',*,*,#121975,.T.); +#121975 = EDGE_CURVE('',#121968,#121976,#121978,.T.); +#121976 = VERTEX_POINT('',#121977); +#121977 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#121978 = LINE('',#121979,#121980); +#121979 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#121980 = VECTOR('',#121981,1.); +#121981 = DIRECTION('',(0.,0.,1.)); +#121982 = ORIENTED_EDGE('',*,*,#121983,.T.); +#121983 = EDGE_CURVE('',#121976,#119530,#121984,.T.); +#121984 = LINE('',#121985,#121986); +#121985 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#121986 = VECTOR('',#121987,1.); +#121987 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#121988 = ORIENTED_EDGE('',*,*,#119537,.F.); +#121989 = ORIENTED_EDGE('',*,*,#121934,.T.); +#121990 = PLANE('',#121991); +#121991 = AXIS2_PLACEMENT_3D('',#121992,#121993,#121994); +#121992 = CARTESIAN_POINT('',(-0.1,-7.62,3.911477598424)); +#121993 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#121994 = DIRECTION('',(0.,0.,1.)); +#121995 = ADVANCED_FACE('',(#121996),#122014,.T.); +#121996 = FACE_BOUND('',#121997,.T.); +#121997 = EDGE_LOOP('',(#121998,#122006,#122012,#122013)); +#121998 = ORIENTED_EDGE('',*,*,#121999,.T.); +#121999 = EDGE_CURVE('',#121976,#122000,#122002,.T.); +#122000 = VERTEX_POINT('',#122001); +#122001 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#122002 = LINE('',#122003,#122004); +#122003 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#122004 = VECTOR('',#122005,1.); +#122005 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122006 = ORIENTED_EDGE('',*,*,#122007,.T.); +#122007 = EDGE_CURVE('',#122000,#119522,#122008,.T.); +#122008 = LINE('',#122009,#122010); +#122009 = CARTESIAN_POINT('',(0.1,-7.37,7.35)); +#122010 = VECTOR('',#122011,1.); +#122011 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122012 = ORIENTED_EDGE('',*,*,#119529,.F.); +#122013 = ORIENTED_EDGE('',*,*,#121983,.F.); +#122014 = PLANE('',#122015); +#122015 = AXIS2_PLACEMENT_3D('',#122016,#122017,#122018); +#122016 = CARTESIAN_POINT('',(-0.1,-7.37,7.35)); +#122017 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122018 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122019 = ADVANCED_FACE('',(#122020),#122056,.F.); +#122020 = FACE_BOUND('',#122021,.F.); +#122021 = EDGE_LOOP('',(#122022,#122023,#122031,#122039,#122047,#122053, + #122054,#122055)); +#122022 = ORIENTED_EDGE('',*,*,#119617,.F.); +#122023 = ORIENTED_EDGE('',*,*,#122024,.T.); +#122024 = EDGE_CURVE('',#119610,#122025,#122027,.T.); +#122025 = VERTEX_POINT('',#122026); +#122026 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#122027 = LINE('',#122028,#122029); +#122028 = CARTESIAN_POINT('',(0.1,-7.92,7.4)); +#122029 = VECTOR('',#122030,1.); +#122030 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122031 = ORIENTED_EDGE('',*,*,#122032,.T.); +#122032 = EDGE_CURVE('',#122025,#122033,#122035,.T.); +#122033 = VERTEX_POINT('',#122034); +#122034 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#122035 = LINE('',#122036,#122037); +#122036 = CARTESIAN_POINT('',(0.1,-7.87,7.35)); +#122037 = VECTOR('',#122038,1.); +#122038 = DIRECTION('',(0.,0.,-1.)); +#122039 = ORIENTED_EDGE('',*,*,#122040,.T.); +#122040 = EDGE_CURVE('',#122033,#122041,#122043,.T.); +#122041 = VERTEX_POINT('',#122042); +#122042 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#122043 = LINE('',#122044,#122045); +#122044 = CARTESIAN_POINT('',(0.1,-7.87,1.25)); +#122045 = VECTOR('',#122046,1.); +#122046 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122047 = ORIENTED_EDGE('',*,*,#122048,.T.); +#122048 = EDGE_CURVE('',#122041,#122000,#122049,.T.); +#122049 = LINE('',#122050,#122051); +#122050 = CARTESIAN_POINT('',(0.1,-7.37,1.25)); +#122051 = VECTOR('',#122052,1.); +#122052 = DIRECTION('',(0.,0.,1.)); +#122053 = ORIENTED_EDGE('',*,*,#122007,.T.); +#122054 = ORIENTED_EDGE('',*,*,#119521,.F.); +#122055 = ORIENTED_EDGE('',*,*,#121919,.T.); +#122056 = PLANE('',#122057); +#122057 = AXIS2_PLACEMENT_3D('',#122058,#122059,#122060); +#122058 = CARTESIAN_POINT('',(0.1,-7.62,3.911477598424)); +#122059 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122060 = DIRECTION('',(0.,0.,1.)); +#122061 = ADVANCED_FACE('',(#122062),#122073,.T.); +#122062 = FACE_BOUND('',#122063,.T.); +#122063 = EDGE_LOOP('',(#122064,#122065,#122066,#122072)); +#122064 = ORIENTED_EDGE('',*,*,#119609,.T.); +#122065 = ORIENTED_EDGE('',*,*,#122024,.T.); +#122066 = ORIENTED_EDGE('',*,*,#122067,.F.); +#122067 = EDGE_CURVE('',#121952,#122025,#122068,.T.); +#122068 = LINE('',#122069,#122070); +#122069 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#122070 = VECTOR('',#122071,1.); +#122071 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122072 = ORIENTED_EDGE('',*,*,#121951,.F.); +#122073 = PLANE('',#122074); +#122074 = AXIS2_PLACEMENT_3D('',#122075,#122076,#122077); +#122075 = CARTESIAN_POINT('',(-0.1,-7.92,7.4)); +#122076 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122077 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122078 = ADVANCED_FACE('',(#122079),#122090,.T.); +#122079 = FACE_BOUND('',#122080,.T.); +#122080 = EDGE_LOOP('',(#122081,#122082,#122083,#122084)); +#122081 = ORIENTED_EDGE('',*,*,#119785,.T.); +#122082 = ORIENTED_EDGE('',*,*,#119648,.T.); +#122083 = ORIENTED_EDGE('',*,*,#119673,.T.); +#122084 = ORIENTED_EDGE('',*,*,#122085,.T.); +#122085 = EDGE_CURVE('',#119674,#119778,#122086,.T.); +#122086 = LINE('',#122087,#122088); +#122087 = CARTESIAN_POINT('',(0.1,-5.08,0.9)); +#122088 = VECTOR('',#122089,1.); +#122089 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122090 = PLANE('',#122091); +#122091 = AXIS2_PLACEMENT_3D('',#122092,#122093,#122094); +#122092 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#122093 = DIRECTION('',(0.,0.,1.)); +#122094 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122095 = ADVANCED_FACE('',(#122096),#122107,.T.); +#122096 = FACE_BOUND('',#122097,.T.); +#122097 = EDGE_LOOP('',(#122098,#122099,#122105,#122106)); +#122098 = ORIENTED_EDGE('',*,*,#119753,.T.); +#122099 = ORIENTED_EDGE('',*,*,#122100,.F.); +#122100 = EDGE_CURVE('',#119698,#119754,#122101,.T.); +#122101 = LINE('',#122102,#122103); +#122102 = CARTESIAN_POINT('',(-0.1,-5.08,0.9)); +#122103 = VECTOR('',#122104,1.); +#122104 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122105 = ORIENTED_EDGE('',*,*,#119705,.T.); +#122106 = ORIENTED_EDGE('',*,*,#119728,.T.); +#122107 = PLANE('',#122108); +#122108 = AXIS2_PLACEMENT_3D('',#122109,#122110,#122111); +#122109 = CARTESIAN_POINT('',(-6.576683642123E-16,-5.08,0.9)); +#122110 = DIRECTION('',(0.,0.,1.)); +#122111 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122112 = ADVANCED_FACE('',(#122113),#122156,.T.); +#122113 = FACE_BOUND('',#122114,.T.); +#122114 = EDGE_LOOP('',(#122115,#122116,#122124,#122132,#122140,#122148, + #122154,#122155)); +#122115 = ORIENTED_EDGE('',*,*,#119761,.F.); +#122116 = ORIENTED_EDGE('',*,*,#122117,.T.); +#122117 = EDGE_CURVE('',#119762,#122118,#122120,.T.); +#122118 = VERTEX_POINT('',#122119); +#122119 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122120 = LINE('',#122121,#122122); +#122121 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#122122 = VECTOR('',#122123,1.); +#122123 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122124 = ORIENTED_EDGE('',*,*,#122125,.T.); +#122125 = EDGE_CURVE('',#122118,#122126,#122128,.T.); +#122126 = VERTEX_POINT('',#122127); +#122127 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122128 = LINE('',#122129,#122130); +#122129 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122130 = VECTOR('',#122131,1.); +#122131 = DIRECTION('',(0.,0.,-1.)); +#122132 = ORIENTED_EDGE('',*,*,#122133,.T.); +#122133 = EDGE_CURVE('',#122126,#122134,#122136,.T.); +#122134 = VERTEX_POINT('',#122135); +#122135 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122136 = LINE('',#122137,#122138); +#122137 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122138 = VECTOR('',#122139,1.); +#122139 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122140 = ORIENTED_EDGE('',*,*,#122141,.T.); +#122141 = EDGE_CURVE('',#122134,#122142,#122144,.T.); +#122142 = VERTEX_POINT('',#122143); +#122143 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122144 = LINE('',#122145,#122146); +#122145 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122146 = VECTOR('',#122147,1.); +#122147 = DIRECTION('',(0.,0.,1.)); +#122148 = ORIENTED_EDGE('',*,*,#122149,.T.); +#122149 = EDGE_CURVE('',#122142,#119690,#122150,.T.); +#122150 = LINE('',#122151,#122152); +#122151 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122152 = VECTOR('',#122153,1.); +#122153 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122154 = ORIENTED_EDGE('',*,*,#119697,.F.); +#122155 = ORIENTED_EDGE('',*,*,#122100,.T.); +#122156 = PLANE('',#122157); +#122157 = AXIS2_PLACEMENT_3D('',#122158,#122159,#122160); +#122158 = CARTESIAN_POINT('',(-0.1,-5.08,3.911477598424)); +#122159 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122160 = DIRECTION('',(0.,0.,1.)); +#122161 = ADVANCED_FACE('',(#122162),#122180,.T.); +#122162 = FACE_BOUND('',#122163,.T.); +#122163 = EDGE_LOOP('',(#122164,#122172,#122178,#122179)); +#122164 = ORIENTED_EDGE('',*,*,#122165,.T.); +#122165 = EDGE_CURVE('',#122142,#122166,#122168,.T.); +#122166 = VERTEX_POINT('',#122167); +#122167 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#122168 = LINE('',#122169,#122170); +#122169 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122170 = VECTOR('',#122171,1.); +#122171 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122172 = ORIENTED_EDGE('',*,*,#122173,.T.); +#122173 = EDGE_CURVE('',#122166,#119682,#122174,.T.); +#122174 = LINE('',#122175,#122176); +#122175 = CARTESIAN_POINT('',(0.1,-4.83,7.35)); +#122176 = VECTOR('',#122177,1.); +#122177 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122178 = ORIENTED_EDGE('',*,*,#119689,.F.); +#122179 = ORIENTED_EDGE('',*,*,#122149,.F.); +#122180 = PLANE('',#122181); +#122181 = AXIS2_PLACEMENT_3D('',#122182,#122183,#122184); +#122182 = CARTESIAN_POINT('',(-0.1,-4.83,7.35)); +#122183 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122184 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122185 = ADVANCED_FACE('',(#122186),#122222,.F.); +#122186 = FACE_BOUND('',#122187,.F.); +#122187 = EDGE_LOOP('',(#122188,#122189,#122197,#122205,#122213,#122219, + #122220,#122221)); +#122188 = ORIENTED_EDGE('',*,*,#119777,.F.); +#122189 = ORIENTED_EDGE('',*,*,#122190,.T.); +#122190 = EDGE_CURVE('',#119770,#122191,#122193,.T.); +#122191 = VERTEX_POINT('',#122192); +#122192 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#122193 = LINE('',#122194,#122195); +#122194 = CARTESIAN_POINT('',(0.1,-5.38,7.4)); +#122195 = VECTOR('',#122196,1.); +#122196 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122197 = ORIENTED_EDGE('',*,*,#122198,.T.); +#122198 = EDGE_CURVE('',#122191,#122199,#122201,.T.); +#122199 = VERTEX_POINT('',#122200); +#122200 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#122201 = LINE('',#122202,#122203); +#122202 = CARTESIAN_POINT('',(0.1,-5.33,7.35)); +#122203 = VECTOR('',#122204,1.); +#122204 = DIRECTION('',(0.,0.,-1.)); +#122205 = ORIENTED_EDGE('',*,*,#122206,.T.); +#122206 = EDGE_CURVE('',#122199,#122207,#122209,.T.); +#122207 = VERTEX_POINT('',#122208); +#122208 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#122209 = LINE('',#122210,#122211); +#122210 = CARTESIAN_POINT('',(0.1,-5.33,1.25)); +#122211 = VECTOR('',#122212,1.); +#122212 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122213 = ORIENTED_EDGE('',*,*,#122214,.T.); +#122214 = EDGE_CURVE('',#122207,#122166,#122215,.T.); +#122215 = LINE('',#122216,#122217); +#122216 = CARTESIAN_POINT('',(0.1,-4.83,1.25)); +#122217 = VECTOR('',#122218,1.); +#122218 = DIRECTION('',(0.,0.,1.)); +#122219 = ORIENTED_EDGE('',*,*,#122173,.T.); +#122220 = ORIENTED_EDGE('',*,*,#119681,.F.); +#122221 = ORIENTED_EDGE('',*,*,#122085,.T.); +#122222 = PLANE('',#122223); +#122223 = AXIS2_PLACEMENT_3D('',#122224,#122225,#122226); +#122224 = CARTESIAN_POINT('',(0.1,-5.08,3.911477598424)); +#122225 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122226 = DIRECTION('',(0.,0.,1.)); +#122227 = ADVANCED_FACE('',(#122228),#122239,.T.); +#122228 = FACE_BOUND('',#122229,.T.); +#122229 = EDGE_LOOP('',(#122230,#122231,#122232,#122238)); +#122230 = ORIENTED_EDGE('',*,*,#119769,.T.); +#122231 = ORIENTED_EDGE('',*,*,#122190,.T.); +#122232 = ORIENTED_EDGE('',*,*,#122233,.F.); +#122233 = EDGE_CURVE('',#122118,#122191,#122234,.T.); +#122234 = LINE('',#122235,#122236); +#122235 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122236 = VECTOR('',#122237,1.); +#122237 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122238 = ORIENTED_EDGE('',*,*,#122117,.F.); +#122239 = PLANE('',#122240); +#122240 = AXIS2_PLACEMENT_3D('',#122241,#122242,#122243); +#122241 = CARTESIAN_POINT('',(-0.1,-5.38,7.4)); +#122242 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122243 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122244 = ADVANCED_FACE('',(#122245),#122256,.T.); +#122245 = FACE_BOUND('',#122246,.T.); +#122246 = EDGE_LOOP('',(#122247,#122248,#122249,#122250)); +#122247 = ORIENTED_EDGE('',*,*,#119945,.T.); +#122248 = ORIENTED_EDGE('',*,*,#119808,.T.); +#122249 = ORIENTED_EDGE('',*,*,#119833,.T.); +#122250 = ORIENTED_EDGE('',*,*,#122251,.T.); +#122251 = EDGE_CURVE('',#119834,#119938,#122252,.T.); +#122252 = LINE('',#122253,#122254); +#122253 = CARTESIAN_POINT('',(0.1,-2.54,0.9)); +#122254 = VECTOR('',#122255,1.); +#122255 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122256 = PLANE('',#122257); +#122257 = AXIS2_PLACEMENT_3D('',#122258,#122259,#122260); +#122258 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#122259 = DIRECTION('',(0.,0.,1.)); +#122260 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122261 = ADVANCED_FACE('',(#122262),#122273,.T.); +#122262 = FACE_BOUND('',#122263,.T.); +#122263 = EDGE_LOOP('',(#122264,#122265,#122271,#122272)); +#122264 = ORIENTED_EDGE('',*,*,#119913,.T.); +#122265 = ORIENTED_EDGE('',*,*,#122266,.F.); +#122266 = EDGE_CURVE('',#119858,#119914,#122267,.T.); +#122267 = LINE('',#122268,#122269); +#122268 = CARTESIAN_POINT('',(-0.1,-2.54,0.9)); +#122269 = VECTOR('',#122270,1.); +#122270 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122271 = ORIENTED_EDGE('',*,*,#119865,.T.); +#122272 = ORIENTED_EDGE('',*,*,#119888,.T.); +#122273 = PLANE('',#122274); +#122274 = AXIS2_PLACEMENT_3D('',#122275,#122276,#122277); +#122275 = CARTESIAN_POINT('',(-3.756717159575E-16,-2.54,0.9)); +#122276 = DIRECTION('',(0.,0.,1.)); +#122277 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122278 = ADVANCED_FACE('',(#122279),#122322,.T.); +#122279 = FACE_BOUND('',#122280,.T.); +#122280 = EDGE_LOOP('',(#122281,#122282,#122290,#122298,#122306,#122314, + #122320,#122321)); +#122281 = ORIENTED_EDGE('',*,*,#119921,.F.); +#122282 = ORIENTED_EDGE('',*,*,#122283,.T.); +#122283 = EDGE_CURVE('',#119922,#122284,#122286,.T.); +#122284 = VERTEX_POINT('',#122285); +#122285 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122286 = LINE('',#122287,#122288); +#122287 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#122288 = VECTOR('',#122289,1.); +#122289 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122290 = ORIENTED_EDGE('',*,*,#122291,.T.); +#122291 = EDGE_CURVE('',#122284,#122292,#122294,.T.); +#122292 = VERTEX_POINT('',#122293); +#122293 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122294 = LINE('',#122295,#122296); +#122295 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122296 = VECTOR('',#122297,1.); +#122297 = DIRECTION('',(0.,0.,-1.)); +#122298 = ORIENTED_EDGE('',*,*,#122299,.T.); +#122299 = EDGE_CURVE('',#122292,#122300,#122302,.T.); +#122300 = VERTEX_POINT('',#122301); +#122301 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122302 = LINE('',#122303,#122304); +#122303 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122304 = VECTOR('',#122305,1.); +#122305 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122306 = ORIENTED_EDGE('',*,*,#122307,.T.); +#122307 = EDGE_CURVE('',#122300,#122308,#122310,.T.); +#122308 = VERTEX_POINT('',#122309); +#122309 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122310 = LINE('',#122311,#122312); +#122311 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122312 = VECTOR('',#122313,1.); +#122313 = DIRECTION('',(0.,0.,1.)); +#122314 = ORIENTED_EDGE('',*,*,#122315,.T.); +#122315 = EDGE_CURVE('',#122308,#119850,#122316,.T.); +#122316 = LINE('',#122317,#122318); +#122317 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122318 = VECTOR('',#122319,1.); +#122319 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122320 = ORIENTED_EDGE('',*,*,#119857,.F.); +#122321 = ORIENTED_EDGE('',*,*,#122266,.T.); +#122322 = PLANE('',#122323); +#122323 = AXIS2_PLACEMENT_3D('',#122324,#122325,#122326); +#122324 = CARTESIAN_POINT('',(-0.1,-2.54,3.911477598424)); +#122325 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122326 = DIRECTION('',(0.,0.,1.)); +#122327 = ADVANCED_FACE('',(#122328),#122346,.T.); +#122328 = FACE_BOUND('',#122329,.T.); +#122329 = EDGE_LOOP('',(#122330,#122338,#122344,#122345)); +#122330 = ORIENTED_EDGE('',*,*,#122331,.T.); +#122331 = EDGE_CURVE('',#122308,#122332,#122334,.T.); +#122332 = VERTEX_POINT('',#122333); +#122333 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#122334 = LINE('',#122335,#122336); +#122335 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122336 = VECTOR('',#122337,1.); +#122337 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122338 = ORIENTED_EDGE('',*,*,#122339,.T.); +#122339 = EDGE_CURVE('',#122332,#119842,#122340,.T.); +#122340 = LINE('',#122341,#122342); +#122341 = CARTESIAN_POINT('',(0.1,-2.29,7.35)); +#122342 = VECTOR('',#122343,1.); +#122343 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122344 = ORIENTED_EDGE('',*,*,#119849,.F.); +#122345 = ORIENTED_EDGE('',*,*,#122315,.F.); +#122346 = PLANE('',#122347); +#122347 = AXIS2_PLACEMENT_3D('',#122348,#122349,#122350); +#122348 = CARTESIAN_POINT('',(-0.1,-2.29,7.35)); +#122349 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122350 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122351 = ADVANCED_FACE('',(#122352),#122388,.F.); +#122352 = FACE_BOUND('',#122353,.F.); +#122353 = EDGE_LOOP('',(#122354,#122355,#122363,#122371,#122379,#122385, + #122386,#122387)); +#122354 = ORIENTED_EDGE('',*,*,#119937,.F.); +#122355 = ORIENTED_EDGE('',*,*,#122356,.T.); +#122356 = EDGE_CURVE('',#119930,#122357,#122359,.T.); +#122357 = VERTEX_POINT('',#122358); +#122358 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#122359 = LINE('',#122360,#122361); +#122360 = CARTESIAN_POINT('',(0.1,-2.84,7.4)); +#122361 = VECTOR('',#122362,1.); +#122362 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122363 = ORIENTED_EDGE('',*,*,#122364,.T.); +#122364 = EDGE_CURVE('',#122357,#122365,#122367,.T.); +#122365 = VERTEX_POINT('',#122366); +#122366 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#122367 = LINE('',#122368,#122369); +#122368 = CARTESIAN_POINT('',(0.1,-2.79,7.35)); +#122369 = VECTOR('',#122370,1.); +#122370 = DIRECTION('',(0.,0.,-1.)); +#122371 = ORIENTED_EDGE('',*,*,#122372,.T.); +#122372 = EDGE_CURVE('',#122365,#122373,#122375,.T.); +#122373 = VERTEX_POINT('',#122374); +#122374 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#122375 = LINE('',#122376,#122377); +#122376 = CARTESIAN_POINT('',(0.1,-2.79,1.25)); +#122377 = VECTOR('',#122378,1.); +#122378 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122379 = ORIENTED_EDGE('',*,*,#122380,.T.); +#122380 = EDGE_CURVE('',#122373,#122332,#122381,.T.); +#122381 = LINE('',#122382,#122383); +#122382 = CARTESIAN_POINT('',(0.1,-2.29,1.25)); +#122383 = VECTOR('',#122384,1.); +#122384 = DIRECTION('',(0.,0.,1.)); +#122385 = ORIENTED_EDGE('',*,*,#122339,.T.); +#122386 = ORIENTED_EDGE('',*,*,#119841,.F.); +#122387 = ORIENTED_EDGE('',*,*,#122251,.T.); +#122388 = PLANE('',#122389); +#122389 = AXIS2_PLACEMENT_3D('',#122390,#122391,#122392); +#122390 = CARTESIAN_POINT('',(0.1,-2.54,3.911477598424)); +#122391 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122392 = DIRECTION('',(0.,0.,1.)); +#122393 = ADVANCED_FACE('',(#122394),#122405,.T.); +#122394 = FACE_BOUND('',#122395,.T.); +#122395 = EDGE_LOOP('',(#122396,#122397,#122398,#122404)); +#122396 = ORIENTED_EDGE('',*,*,#119929,.T.); +#122397 = ORIENTED_EDGE('',*,*,#122356,.T.); +#122398 = ORIENTED_EDGE('',*,*,#122399,.F.); +#122399 = EDGE_CURVE('',#122284,#122357,#122400,.T.); +#122400 = LINE('',#122401,#122402); +#122401 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122402 = VECTOR('',#122403,1.); +#122403 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122404 = ORIENTED_EDGE('',*,*,#122283,.F.); +#122405 = PLANE('',#122406); +#122406 = AXIS2_PLACEMENT_3D('',#122407,#122408,#122409); +#122407 = CARTESIAN_POINT('',(-0.1,-2.84,7.4)); +#122408 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122409 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122410 = ADVANCED_FACE('',(#122411),#122422,.T.); +#122411 = FACE_BOUND('',#122412,.T.); +#122412 = EDGE_LOOP('',(#122413,#122414,#122415,#122416)); +#122413 = ORIENTED_EDGE('',*,*,#120105,.T.); +#122414 = ORIENTED_EDGE('',*,*,#119968,.T.); +#122415 = ORIENTED_EDGE('',*,*,#119993,.T.); +#122416 = ORIENTED_EDGE('',*,*,#122417,.T.); +#122417 = EDGE_CURVE('',#119994,#120098,#122418,.T.); +#122418 = LINE('',#122419,#122420); +#122419 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,0.9)); +#122420 = VECTOR('',#122421,1.); +#122421 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122422 = PLANE('',#122423); +#122423 = AXIS2_PLACEMENT_3D('',#122424,#122425,#122426); +#122424 = CARTESIAN_POINT('',(-9.367506770275E-17,1.040002169969E-32,0.9 + )); +#122425 = DIRECTION('',(0.,0.,1.)); +#122426 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122427 = ADVANCED_FACE('',(#122428),#122439,.T.); +#122428 = FACE_BOUND('',#122429,.T.); +#122429 = EDGE_LOOP('',(#122430,#122431,#122437,#122438)); +#122430 = ORIENTED_EDGE('',*,*,#120073,.T.); +#122431 = ORIENTED_EDGE('',*,*,#122432,.F.); +#122432 = EDGE_CURVE('',#120018,#120074,#122433,.T.); +#122433 = LINE('',#122434,#122435); +#122434 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,0.9)); +#122435 = VECTOR('',#122436,1.); +#122436 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122437 = ORIENTED_EDGE('',*,*,#120025,.T.); +#122438 = ORIENTED_EDGE('',*,*,#120048,.T.); +#122439 = PLANE('',#122440); +#122440 = AXIS2_PLACEMENT_3D('',#122441,#122442,#122443); +#122441 = CARTESIAN_POINT('',(-9.367506770275E-17,1.040002169969E-32,0.9 + )); +#122442 = DIRECTION('',(0.,0.,1.)); +#122443 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122444 = ADVANCED_FACE('',(#122445),#122488,.T.); +#122445 = FACE_BOUND('',#122446,.T.); +#122446 = EDGE_LOOP('',(#122447,#122448,#122456,#122464,#122472,#122480, + #122486,#122487)); +#122447 = ORIENTED_EDGE('',*,*,#120081,.F.); +#122448 = ORIENTED_EDGE('',*,*,#122449,.T.); +#122449 = EDGE_CURVE('',#120082,#122450,#122452,.T.); +#122450 = VERTEX_POINT('',#122451); +#122451 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#122452 = LINE('',#122453,#122454); +#122453 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#122454 = VECTOR('',#122455,1.); +#122455 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122456 = ORIENTED_EDGE('',*,*,#122457,.T.); +#122457 = EDGE_CURVE('',#122450,#122458,#122460,.T.); +#122458 = VERTEX_POINT('',#122459); +#122459 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#122460 = LINE('',#122461,#122462); +#122461 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#122462 = VECTOR('',#122463,1.); +#122463 = DIRECTION('',(0.,0.,-1.)); +#122464 = ORIENTED_EDGE('',*,*,#122465,.T.); +#122465 = EDGE_CURVE('',#122458,#122466,#122468,.T.); +#122466 = VERTEX_POINT('',#122467); +#122467 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#122468 = LINE('',#122469,#122470); +#122469 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#122470 = VECTOR('',#122471,1.); +#122471 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122472 = ORIENTED_EDGE('',*,*,#122473,.T.); +#122473 = EDGE_CURVE('',#122466,#122474,#122476,.T.); +#122474 = VERTEX_POINT('',#122475); +#122475 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122476 = LINE('',#122477,#122478); +#122477 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#122478 = VECTOR('',#122479,1.); +#122479 = DIRECTION('',(0.,0.,1.)); +#122480 = ORIENTED_EDGE('',*,*,#122481,.T.); +#122481 = EDGE_CURVE('',#122474,#120010,#122482,.T.); +#122482 = LINE('',#122483,#122484); +#122483 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122484 = VECTOR('',#122485,1.); +#122485 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122486 = ORIENTED_EDGE('',*,*,#120017,.F.); +#122487 = ORIENTED_EDGE('',*,*,#122432,.T.); +#122488 = PLANE('',#122489); +#122489 = AXIS2_PLACEMENT_3D('',#122490,#122491,#122492); +#122490 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,3.911477598424)); +#122491 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122492 = DIRECTION('',(0.,0.,1.)); +#122493 = ADVANCED_FACE('',(#122494),#122512,.T.); +#122494 = FACE_BOUND('',#122495,.T.); +#122495 = EDGE_LOOP('',(#122496,#122504,#122510,#122511)); +#122496 = ORIENTED_EDGE('',*,*,#122497,.T.); +#122497 = EDGE_CURVE('',#122474,#122498,#122500,.T.); +#122498 = VERTEX_POINT('',#122499); +#122499 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#122500 = LINE('',#122501,#122502); +#122501 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122502 = VECTOR('',#122503,1.); +#122503 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122504 = ORIENTED_EDGE('',*,*,#122505,.T.); +#122505 = EDGE_CURVE('',#122498,#120002,#122506,.T.); +#122506 = LINE('',#122507,#122508); +#122507 = CARTESIAN_POINT('',(0.1,0.25,7.35)); +#122508 = VECTOR('',#122509,1.); +#122509 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122510 = ORIENTED_EDGE('',*,*,#120009,.F.); +#122511 = ORIENTED_EDGE('',*,*,#122481,.F.); +#122512 = PLANE('',#122513); +#122513 = AXIS2_PLACEMENT_3D('',#122514,#122515,#122516); +#122514 = CARTESIAN_POINT('',(-0.1,0.25,7.35)); +#122515 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#122516 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122517 = ADVANCED_FACE('',(#122518),#122554,.F.); +#122518 = FACE_BOUND('',#122519,.F.); +#122519 = EDGE_LOOP('',(#122520,#122521,#122529,#122537,#122545,#122551, + #122552,#122553)); +#122520 = ORIENTED_EDGE('',*,*,#120097,.F.); +#122521 = ORIENTED_EDGE('',*,*,#122522,.T.); +#122522 = EDGE_CURVE('',#120090,#122523,#122525,.T.); +#122523 = VERTEX_POINT('',#122524); +#122524 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#122525 = LINE('',#122526,#122527); +#122526 = CARTESIAN_POINT('',(0.1,-0.3,7.4)); +#122527 = VECTOR('',#122528,1.); +#122528 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122529 = ORIENTED_EDGE('',*,*,#122530,.T.); +#122530 = EDGE_CURVE('',#122523,#122531,#122533,.T.); +#122531 = VERTEX_POINT('',#122532); +#122532 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#122533 = LINE('',#122534,#122535); +#122534 = CARTESIAN_POINT('',(0.1,-0.25,7.35)); +#122535 = VECTOR('',#122536,1.); +#122536 = DIRECTION('',(0.,0.,-1.)); +#122537 = ORIENTED_EDGE('',*,*,#122538,.T.); +#122538 = EDGE_CURVE('',#122531,#122539,#122541,.T.); +#122539 = VERTEX_POINT('',#122540); +#122540 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#122541 = LINE('',#122542,#122543); +#122542 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#122543 = VECTOR('',#122544,1.); +#122544 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122545 = ORIENTED_EDGE('',*,*,#122546,.T.); +#122546 = EDGE_CURVE('',#122539,#122498,#122547,.T.); +#122547 = LINE('',#122548,#122549); +#122548 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#122549 = VECTOR('',#122550,1.); +#122550 = DIRECTION('',(0.,0.,1.)); +#122551 = ORIENTED_EDGE('',*,*,#122505,.T.); +#122552 = ORIENTED_EDGE('',*,*,#120001,.F.); +#122553 = ORIENTED_EDGE('',*,*,#122417,.T.); +#122554 = PLANE('',#122555); +#122555 = AXIS2_PLACEMENT_3D('',#122556,#122557,#122558); +#122556 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,3.911477598424)); +#122557 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#122558 = DIRECTION('',(0.,0.,1.)); +#122559 = ADVANCED_FACE('',(#122560),#122571,.T.); +#122560 = FACE_BOUND('',#122561,.T.); +#122561 = EDGE_LOOP('',(#122562,#122563,#122564,#122570)); +#122562 = ORIENTED_EDGE('',*,*,#120089,.T.); +#122563 = ORIENTED_EDGE('',*,*,#122522,.T.); +#122564 = ORIENTED_EDGE('',*,*,#122565,.F.); +#122565 = EDGE_CURVE('',#122450,#122523,#122566,.T.); +#122566 = LINE('',#122567,#122568); +#122567 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#122568 = VECTOR('',#122569,1.); +#122569 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122570 = ORIENTED_EDGE('',*,*,#122449,.F.); +#122571 = PLANE('',#122572); +#122572 = AXIS2_PLACEMENT_3D('',#122573,#122574,#122575); +#122573 = CARTESIAN_POINT('',(-0.1,-0.3,7.4)); +#122574 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187 + )); +#122575 = DIRECTION('',(7.850462293414E-17,0.707106781187, + -0.707106781187)); +#122576 = ADVANCED_FACE('',(#122577),#122588,.T.); +#122577 = FACE_BOUND('',#122578,.T.); +#122578 = EDGE_LOOP('',(#122579,#122585,#122586,#122587)); +#122579 = ORIENTED_EDGE('',*,*,#122580,.T.); +#122580 = EDGE_CURVE('',#120972,#121045,#122581,.T.); +#122581 = LINE('',#122582,#122583); +#122582 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#122583 = VECTOR('',#122584,1.); +#122584 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122585 = ORIENTED_EDGE('',*,*,#121052,.T.); +#122586 = ORIENTED_EDGE('',*,*,#121003,.F.); +#122587 = ORIENTED_EDGE('',*,*,#120979,.F.); +#122588 = PLANE('',#122589); +#122589 = AXIS2_PLACEMENT_3D('',#122590,#122591,#122592); +#122590 = CARTESIAN_POINT('',(-0.1,-22.61,1.25)); +#122591 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122592 = DIRECTION('',(0.,0.,1.)); +#122593 = ADVANCED_FACE('',(#122594),#122605,.T.); +#122594 = FACE_BOUND('',#122595,.T.); +#122595 = EDGE_LOOP('',(#122596,#122602,#122603,#122604)); +#122596 = ORIENTED_EDGE('',*,*,#122597,.T.); +#122597 = EDGE_CURVE('',#120964,#121037,#122598,.T.); +#122598 = LINE('',#122599,#122600); +#122599 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#122600 = VECTOR('',#122601,1.); +#122601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122602 = ORIENTED_EDGE('',*,*,#121044,.T.); +#122603 = ORIENTED_EDGE('',*,*,#122580,.F.); +#122604 = ORIENTED_EDGE('',*,*,#120971,.F.); +#122605 = PLANE('',#122606); +#122606 = AXIS2_PLACEMENT_3D('',#122607,#122608,#122609); +#122607 = CARTESIAN_POINT('',(-0.1,-23.11,1.25)); +#122608 = DIRECTION('',(0.,0.,1.)); +#122609 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122610 = ADVANCED_FACE('',(#122611),#122617,.T.); +#122611 = FACE_BOUND('',#122612,.T.); +#122612 = EDGE_LOOP('',(#122613,#122614,#122615,#122616)); +#122613 = ORIENTED_EDGE('',*,*,#121071,.T.); +#122614 = ORIENTED_EDGE('',*,*,#121036,.T.); +#122615 = ORIENTED_EDGE('',*,*,#122597,.F.); +#122616 = ORIENTED_EDGE('',*,*,#120963,.F.); +#122617 = PLANE('',#122618); +#122618 = AXIS2_PLACEMENT_3D('',#122619,#122620,#122621); +#122619 = CARTESIAN_POINT('',(-0.1,-23.11,7.35)); +#122620 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122621 = DIRECTION('',(0.,0.,-1.)); +#122622 = ADVANCED_FACE('',(#122623),#122634,.T.); +#122623 = FACE_BOUND('',#122624,.T.); +#122624 = EDGE_LOOP('',(#122625,#122631,#122632,#122633)); +#122625 = ORIENTED_EDGE('',*,*,#122626,.T.); +#122626 = EDGE_CURVE('',#121138,#121211,#122627,.T.); +#122627 = LINE('',#122628,#122629); +#122628 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#122629 = VECTOR('',#122630,1.); +#122630 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122631 = ORIENTED_EDGE('',*,*,#121218,.T.); +#122632 = ORIENTED_EDGE('',*,*,#121169,.F.); +#122633 = ORIENTED_EDGE('',*,*,#121145,.F.); +#122634 = PLANE('',#122635); +#122635 = AXIS2_PLACEMENT_3D('',#122636,#122637,#122638); +#122636 = CARTESIAN_POINT('',(-0.1,-20.07,1.25)); +#122637 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122638 = DIRECTION('',(0.,0.,1.)); +#122639 = ADVANCED_FACE('',(#122640),#122651,.T.); +#122640 = FACE_BOUND('',#122641,.T.); +#122641 = EDGE_LOOP('',(#122642,#122648,#122649,#122650)); +#122642 = ORIENTED_EDGE('',*,*,#122643,.T.); +#122643 = EDGE_CURVE('',#121130,#121203,#122644,.T.); +#122644 = LINE('',#122645,#122646); +#122645 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#122646 = VECTOR('',#122647,1.); +#122647 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122648 = ORIENTED_EDGE('',*,*,#121210,.T.); +#122649 = ORIENTED_EDGE('',*,*,#122626,.F.); +#122650 = ORIENTED_EDGE('',*,*,#121137,.F.); +#122651 = PLANE('',#122652); +#122652 = AXIS2_PLACEMENT_3D('',#122653,#122654,#122655); +#122653 = CARTESIAN_POINT('',(-0.1,-20.57,1.25)); +#122654 = DIRECTION('',(0.,0.,1.)); +#122655 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122656 = ADVANCED_FACE('',(#122657),#122663,.T.); +#122657 = FACE_BOUND('',#122658,.T.); +#122658 = EDGE_LOOP('',(#122659,#122660,#122661,#122662)); +#122659 = ORIENTED_EDGE('',*,*,#121237,.T.); +#122660 = ORIENTED_EDGE('',*,*,#121202,.T.); +#122661 = ORIENTED_EDGE('',*,*,#122643,.F.); +#122662 = ORIENTED_EDGE('',*,*,#121129,.F.); +#122663 = PLANE('',#122664); +#122664 = AXIS2_PLACEMENT_3D('',#122665,#122666,#122667); +#122665 = CARTESIAN_POINT('',(-0.1,-20.57,7.35)); +#122666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122667 = DIRECTION('',(0.,0.,-1.)); +#122668 = ADVANCED_FACE('',(#122669),#122680,.T.); +#122669 = FACE_BOUND('',#122670,.T.); +#122670 = EDGE_LOOP('',(#122671,#122677,#122678,#122679)); +#122671 = ORIENTED_EDGE('',*,*,#122672,.T.); +#122672 = EDGE_CURVE('',#121304,#121377,#122673,.T.); +#122673 = LINE('',#122674,#122675); +#122674 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#122675 = VECTOR('',#122676,1.); +#122676 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122677 = ORIENTED_EDGE('',*,*,#121384,.T.); +#122678 = ORIENTED_EDGE('',*,*,#121335,.F.); +#122679 = ORIENTED_EDGE('',*,*,#121311,.F.); +#122680 = PLANE('',#122681); +#122681 = AXIS2_PLACEMENT_3D('',#122682,#122683,#122684); +#122682 = CARTESIAN_POINT('',(-0.1,-17.53,1.25)); +#122683 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122684 = DIRECTION('',(0.,0.,1.)); +#122685 = ADVANCED_FACE('',(#122686),#122697,.T.); +#122686 = FACE_BOUND('',#122687,.T.); +#122687 = EDGE_LOOP('',(#122688,#122694,#122695,#122696)); +#122688 = ORIENTED_EDGE('',*,*,#122689,.T.); +#122689 = EDGE_CURVE('',#121296,#121369,#122690,.T.); +#122690 = LINE('',#122691,#122692); +#122691 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#122692 = VECTOR('',#122693,1.); +#122693 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122694 = ORIENTED_EDGE('',*,*,#121376,.T.); +#122695 = ORIENTED_EDGE('',*,*,#122672,.F.); +#122696 = ORIENTED_EDGE('',*,*,#121303,.F.); +#122697 = PLANE('',#122698); +#122698 = AXIS2_PLACEMENT_3D('',#122699,#122700,#122701); +#122699 = CARTESIAN_POINT('',(-0.1,-18.03,1.25)); +#122700 = DIRECTION('',(0.,0.,1.)); +#122701 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122702 = ADVANCED_FACE('',(#122703),#122709,.T.); +#122703 = FACE_BOUND('',#122704,.T.); +#122704 = EDGE_LOOP('',(#122705,#122706,#122707,#122708)); +#122705 = ORIENTED_EDGE('',*,*,#121403,.T.); +#122706 = ORIENTED_EDGE('',*,*,#121368,.T.); +#122707 = ORIENTED_EDGE('',*,*,#122689,.F.); +#122708 = ORIENTED_EDGE('',*,*,#121295,.F.); +#122709 = PLANE('',#122710); +#122710 = AXIS2_PLACEMENT_3D('',#122711,#122712,#122713); +#122711 = CARTESIAN_POINT('',(-0.1,-18.03,7.35)); +#122712 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122713 = DIRECTION('',(0.,0.,-1.)); +#122714 = ADVANCED_FACE('',(#122715),#122726,.T.); +#122715 = FACE_BOUND('',#122716,.T.); +#122716 = EDGE_LOOP('',(#122717,#122723,#122724,#122725)); +#122717 = ORIENTED_EDGE('',*,*,#122718,.T.); +#122718 = EDGE_CURVE('',#121470,#121543,#122719,.T.); +#122719 = LINE('',#122720,#122721); +#122720 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#122721 = VECTOR('',#122722,1.); +#122722 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122723 = ORIENTED_EDGE('',*,*,#121550,.T.); +#122724 = ORIENTED_EDGE('',*,*,#121501,.F.); +#122725 = ORIENTED_EDGE('',*,*,#121477,.F.); +#122726 = PLANE('',#122727); +#122727 = AXIS2_PLACEMENT_3D('',#122728,#122729,#122730); +#122728 = CARTESIAN_POINT('',(-0.1,-14.99,1.25)); +#122729 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122730 = DIRECTION('',(0.,0.,1.)); +#122731 = ADVANCED_FACE('',(#122732),#122743,.T.); +#122732 = FACE_BOUND('',#122733,.T.); +#122733 = EDGE_LOOP('',(#122734,#122740,#122741,#122742)); +#122734 = ORIENTED_EDGE('',*,*,#122735,.T.); +#122735 = EDGE_CURVE('',#121462,#121535,#122736,.T.); +#122736 = LINE('',#122737,#122738); +#122737 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#122738 = VECTOR('',#122739,1.); +#122739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122740 = ORIENTED_EDGE('',*,*,#121542,.T.); +#122741 = ORIENTED_EDGE('',*,*,#122718,.F.); +#122742 = ORIENTED_EDGE('',*,*,#121469,.F.); +#122743 = PLANE('',#122744); +#122744 = AXIS2_PLACEMENT_3D('',#122745,#122746,#122747); +#122745 = CARTESIAN_POINT('',(-0.1,-15.49,1.25)); +#122746 = DIRECTION('',(0.,0.,1.)); +#122747 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122748 = ADVANCED_FACE('',(#122749),#122755,.T.); +#122749 = FACE_BOUND('',#122750,.T.); +#122750 = EDGE_LOOP('',(#122751,#122752,#122753,#122754)); +#122751 = ORIENTED_EDGE('',*,*,#121569,.T.); +#122752 = ORIENTED_EDGE('',*,*,#121534,.T.); +#122753 = ORIENTED_EDGE('',*,*,#122735,.F.); +#122754 = ORIENTED_EDGE('',*,*,#121461,.F.); +#122755 = PLANE('',#122756); +#122756 = AXIS2_PLACEMENT_3D('',#122757,#122758,#122759); +#122757 = CARTESIAN_POINT('',(-0.1,-15.49,7.35)); +#122758 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122759 = DIRECTION('',(0.,0.,-1.)); +#122760 = ADVANCED_FACE('',(#122761),#122772,.T.); +#122761 = FACE_BOUND('',#122762,.T.); +#122762 = EDGE_LOOP('',(#122763,#122769,#122770,#122771)); +#122763 = ORIENTED_EDGE('',*,*,#122764,.T.); +#122764 = EDGE_CURVE('',#121636,#121709,#122765,.T.); +#122765 = LINE('',#122766,#122767); +#122766 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#122767 = VECTOR('',#122768,1.); +#122768 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122769 = ORIENTED_EDGE('',*,*,#121716,.T.); +#122770 = ORIENTED_EDGE('',*,*,#121667,.F.); +#122771 = ORIENTED_EDGE('',*,*,#121643,.F.); +#122772 = PLANE('',#122773); +#122773 = AXIS2_PLACEMENT_3D('',#122774,#122775,#122776); +#122774 = CARTESIAN_POINT('',(-0.1,-12.45,1.25)); +#122775 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122776 = DIRECTION('',(0.,0.,1.)); +#122777 = ADVANCED_FACE('',(#122778),#122789,.T.); +#122778 = FACE_BOUND('',#122779,.T.); +#122779 = EDGE_LOOP('',(#122780,#122786,#122787,#122788)); +#122780 = ORIENTED_EDGE('',*,*,#122781,.T.); +#122781 = EDGE_CURVE('',#121628,#121701,#122782,.T.); +#122782 = LINE('',#122783,#122784); +#122783 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#122784 = VECTOR('',#122785,1.); +#122785 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122786 = ORIENTED_EDGE('',*,*,#121708,.T.); +#122787 = ORIENTED_EDGE('',*,*,#122764,.F.); +#122788 = ORIENTED_EDGE('',*,*,#121635,.F.); +#122789 = PLANE('',#122790); +#122790 = AXIS2_PLACEMENT_3D('',#122791,#122792,#122793); +#122791 = CARTESIAN_POINT('',(-0.1,-12.95,1.25)); +#122792 = DIRECTION('',(0.,0.,1.)); +#122793 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122794 = ADVANCED_FACE('',(#122795),#122801,.T.); +#122795 = FACE_BOUND('',#122796,.T.); +#122796 = EDGE_LOOP('',(#122797,#122798,#122799,#122800)); +#122797 = ORIENTED_EDGE('',*,*,#121735,.T.); +#122798 = ORIENTED_EDGE('',*,*,#121700,.T.); +#122799 = ORIENTED_EDGE('',*,*,#122781,.F.); +#122800 = ORIENTED_EDGE('',*,*,#121627,.F.); +#122801 = PLANE('',#122802); +#122802 = AXIS2_PLACEMENT_3D('',#122803,#122804,#122805); +#122803 = CARTESIAN_POINT('',(-0.1,-12.95,7.35)); +#122804 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122805 = DIRECTION('',(0.,0.,-1.)); +#122806 = ADVANCED_FACE('',(#122807),#122818,.T.); +#122807 = FACE_BOUND('',#122808,.T.); +#122808 = EDGE_LOOP('',(#122809,#122815,#122816,#122817)); +#122809 = ORIENTED_EDGE('',*,*,#122810,.T.); +#122810 = EDGE_CURVE('',#121802,#121875,#122811,.T.); +#122811 = LINE('',#122812,#122813); +#122812 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#122813 = VECTOR('',#122814,1.); +#122814 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122815 = ORIENTED_EDGE('',*,*,#121882,.T.); +#122816 = ORIENTED_EDGE('',*,*,#121833,.F.); +#122817 = ORIENTED_EDGE('',*,*,#121809,.F.); +#122818 = PLANE('',#122819); +#122819 = AXIS2_PLACEMENT_3D('',#122820,#122821,#122822); +#122820 = CARTESIAN_POINT('',(-0.1,-9.91,1.25)); +#122821 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122822 = DIRECTION('',(0.,0.,1.)); +#122823 = ADVANCED_FACE('',(#122824),#122835,.T.); +#122824 = FACE_BOUND('',#122825,.T.); +#122825 = EDGE_LOOP('',(#122826,#122832,#122833,#122834)); +#122826 = ORIENTED_EDGE('',*,*,#122827,.T.); +#122827 = EDGE_CURVE('',#121794,#121867,#122828,.T.); +#122828 = LINE('',#122829,#122830); +#122829 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#122830 = VECTOR('',#122831,1.); +#122831 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122832 = ORIENTED_EDGE('',*,*,#121874,.T.); +#122833 = ORIENTED_EDGE('',*,*,#122810,.F.); +#122834 = ORIENTED_EDGE('',*,*,#121801,.F.); +#122835 = PLANE('',#122836); +#122836 = AXIS2_PLACEMENT_3D('',#122837,#122838,#122839); +#122837 = CARTESIAN_POINT('',(-0.1,-10.41,1.25)); +#122838 = DIRECTION('',(0.,0.,1.)); +#122839 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122840 = ADVANCED_FACE('',(#122841),#122847,.T.); +#122841 = FACE_BOUND('',#122842,.T.); +#122842 = EDGE_LOOP('',(#122843,#122844,#122845,#122846)); +#122843 = ORIENTED_EDGE('',*,*,#121901,.T.); +#122844 = ORIENTED_EDGE('',*,*,#121866,.T.); +#122845 = ORIENTED_EDGE('',*,*,#122827,.F.); +#122846 = ORIENTED_EDGE('',*,*,#121793,.F.); +#122847 = PLANE('',#122848); +#122848 = AXIS2_PLACEMENT_3D('',#122849,#122850,#122851); +#122849 = CARTESIAN_POINT('',(-0.1,-10.41,7.35)); +#122850 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122851 = DIRECTION('',(0.,0.,-1.)); +#122852 = ADVANCED_FACE('',(#122853),#122864,.T.); +#122853 = FACE_BOUND('',#122854,.T.); +#122854 = EDGE_LOOP('',(#122855,#122861,#122862,#122863)); +#122855 = ORIENTED_EDGE('',*,*,#122856,.T.); +#122856 = EDGE_CURVE('',#121968,#122041,#122857,.T.); +#122857 = LINE('',#122858,#122859); +#122858 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#122859 = VECTOR('',#122860,1.); +#122860 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122861 = ORIENTED_EDGE('',*,*,#122048,.T.); +#122862 = ORIENTED_EDGE('',*,*,#121999,.F.); +#122863 = ORIENTED_EDGE('',*,*,#121975,.F.); +#122864 = PLANE('',#122865); +#122865 = AXIS2_PLACEMENT_3D('',#122866,#122867,#122868); +#122866 = CARTESIAN_POINT('',(-0.1,-7.37,1.25)); +#122867 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122868 = DIRECTION('',(0.,0.,1.)); +#122869 = ADVANCED_FACE('',(#122870),#122881,.T.); +#122870 = FACE_BOUND('',#122871,.T.); +#122871 = EDGE_LOOP('',(#122872,#122878,#122879,#122880)); +#122872 = ORIENTED_EDGE('',*,*,#122873,.T.); +#122873 = EDGE_CURVE('',#121960,#122033,#122874,.T.); +#122874 = LINE('',#122875,#122876); +#122875 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#122876 = VECTOR('',#122877,1.); +#122877 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122878 = ORIENTED_EDGE('',*,*,#122040,.T.); +#122879 = ORIENTED_EDGE('',*,*,#122856,.F.); +#122880 = ORIENTED_EDGE('',*,*,#121967,.F.); +#122881 = PLANE('',#122882); +#122882 = AXIS2_PLACEMENT_3D('',#122883,#122884,#122885); +#122883 = CARTESIAN_POINT('',(-0.1,-7.87,1.25)); +#122884 = DIRECTION('',(0.,0.,1.)); +#122885 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122886 = ADVANCED_FACE('',(#122887),#122893,.T.); +#122887 = FACE_BOUND('',#122888,.T.); +#122888 = EDGE_LOOP('',(#122889,#122890,#122891,#122892)); +#122889 = ORIENTED_EDGE('',*,*,#122067,.T.); +#122890 = ORIENTED_EDGE('',*,*,#122032,.T.); +#122891 = ORIENTED_EDGE('',*,*,#122873,.F.); +#122892 = ORIENTED_EDGE('',*,*,#121959,.F.); +#122893 = PLANE('',#122894); +#122894 = AXIS2_PLACEMENT_3D('',#122895,#122896,#122897); +#122895 = CARTESIAN_POINT('',(-0.1,-7.87,7.35)); +#122896 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122897 = DIRECTION('',(0.,0.,-1.)); +#122898 = ADVANCED_FACE('',(#122899),#122910,.T.); +#122899 = FACE_BOUND('',#122900,.T.); +#122900 = EDGE_LOOP('',(#122901,#122907,#122908,#122909)); +#122901 = ORIENTED_EDGE('',*,*,#122902,.T.); +#122902 = EDGE_CURVE('',#122134,#122207,#122903,.T.); +#122903 = LINE('',#122904,#122905); +#122904 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122905 = VECTOR('',#122906,1.); +#122906 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122907 = ORIENTED_EDGE('',*,*,#122214,.T.); +#122908 = ORIENTED_EDGE('',*,*,#122165,.F.); +#122909 = ORIENTED_EDGE('',*,*,#122141,.F.); +#122910 = PLANE('',#122911); +#122911 = AXIS2_PLACEMENT_3D('',#122912,#122913,#122914); +#122912 = CARTESIAN_POINT('',(-0.1,-4.83,1.25)); +#122913 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122914 = DIRECTION('',(0.,0.,1.)); +#122915 = ADVANCED_FACE('',(#122916),#122927,.T.); +#122916 = FACE_BOUND('',#122917,.T.); +#122917 = EDGE_LOOP('',(#122918,#122924,#122925,#122926)); +#122918 = ORIENTED_EDGE('',*,*,#122919,.T.); +#122919 = EDGE_CURVE('',#122126,#122199,#122920,.T.); +#122920 = LINE('',#122921,#122922); +#122921 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122922 = VECTOR('',#122923,1.); +#122923 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122924 = ORIENTED_EDGE('',*,*,#122206,.T.); +#122925 = ORIENTED_EDGE('',*,*,#122902,.F.); +#122926 = ORIENTED_EDGE('',*,*,#122133,.F.); +#122927 = PLANE('',#122928); +#122928 = AXIS2_PLACEMENT_3D('',#122929,#122930,#122931); +#122929 = CARTESIAN_POINT('',(-0.1,-5.33,1.25)); +#122930 = DIRECTION('',(0.,0.,1.)); +#122931 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122932 = ADVANCED_FACE('',(#122933),#122939,.T.); +#122933 = FACE_BOUND('',#122934,.T.); +#122934 = EDGE_LOOP('',(#122935,#122936,#122937,#122938)); +#122935 = ORIENTED_EDGE('',*,*,#122233,.T.); +#122936 = ORIENTED_EDGE('',*,*,#122198,.T.); +#122937 = ORIENTED_EDGE('',*,*,#122919,.F.); +#122938 = ORIENTED_EDGE('',*,*,#122125,.F.); +#122939 = PLANE('',#122940); +#122940 = AXIS2_PLACEMENT_3D('',#122941,#122942,#122943); +#122941 = CARTESIAN_POINT('',(-0.1,-5.33,7.35)); +#122942 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122943 = DIRECTION('',(0.,0.,-1.)); +#122944 = ADVANCED_FACE('',(#122945),#122956,.T.); +#122945 = FACE_BOUND('',#122946,.T.); +#122946 = EDGE_LOOP('',(#122947,#122953,#122954,#122955)); +#122947 = ORIENTED_EDGE('',*,*,#122948,.T.); +#122948 = EDGE_CURVE('',#122300,#122373,#122949,.T.); +#122949 = LINE('',#122950,#122951); +#122950 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122951 = VECTOR('',#122952,1.); +#122952 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122953 = ORIENTED_EDGE('',*,*,#122380,.T.); +#122954 = ORIENTED_EDGE('',*,*,#122331,.F.); +#122955 = ORIENTED_EDGE('',*,*,#122307,.F.); +#122956 = PLANE('',#122957); +#122957 = AXIS2_PLACEMENT_3D('',#122958,#122959,#122960); +#122958 = CARTESIAN_POINT('',(-0.1,-2.29,1.25)); +#122959 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#122960 = DIRECTION('',(0.,0.,1.)); +#122961 = ADVANCED_FACE('',(#122962),#122973,.T.); +#122962 = FACE_BOUND('',#122963,.T.); +#122963 = EDGE_LOOP('',(#122964,#122970,#122971,#122972)); +#122964 = ORIENTED_EDGE('',*,*,#122965,.T.); +#122965 = EDGE_CURVE('',#122292,#122365,#122966,.T.); +#122966 = LINE('',#122967,#122968); +#122967 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122968 = VECTOR('',#122969,1.); +#122969 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122970 = ORIENTED_EDGE('',*,*,#122372,.T.); +#122971 = ORIENTED_EDGE('',*,*,#122948,.F.); +#122972 = ORIENTED_EDGE('',*,*,#122299,.F.); +#122973 = PLANE('',#122974); +#122974 = AXIS2_PLACEMENT_3D('',#122975,#122976,#122977); +#122975 = CARTESIAN_POINT('',(-0.1,-2.79,1.25)); +#122976 = DIRECTION('',(0.,0.,1.)); +#122977 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#122978 = ADVANCED_FACE('',(#122979),#122985,.T.); +#122979 = FACE_BOUND('',#122980,.T.); +#122980 = EDGE_LOOP('',(#122981,#122982,#122983,#122984)); +#122981 = ORIENTED_EDGE('',*,*,#122399,.T.); +#122982 = ORIENTED_EDGE('',*,*,#122364,.T.); +#122983 = ORIENTED_EDGE('',*,*,#122965,.F.); +#122984 = ORIENTED_EDGE('',*,*,#122291,.F.); +#122985 = PLANE('',#122986); +#122986 = AXIS2_PLACEMENT_3D('',#122987,#122988,#122989); +#122987 = CARTESIAN_POINT('',(-0.1,-2.79,7.35)); +#122988 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#122989 = DIRECTION('',(0.,0.,-1.)); +#122990 = ADVANCED_FACE('',(#122991),#123002,.T.); +#122991 = FACE_BOUND('',#122992,.T.); +#122992 = EDGE_LOOP('',(#122993,#122999,#123000,#123001)); +#122993 = ORIENTED_EDGE('',*,*,#122994,.T.); +#122994 = EDGE_CURVE('',#122466,#122539,#122995,.T.); +#122995 = LINE('',#122996,#122997); +#122996 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#122997 = VECTOR('',#122998,1.); +#122998 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#122999 = ORIENTED_EDGE('',*,*,#122546,.T.); +#123000 = ORIENTED_EDGE('',*,*,#122497,.F.); +#123001 = ORIENTED_EDGE('',*,*,#122473,.F.); +#123002 = PLANE('',#123003); +#123003 = AXIS2_PLACEMENT_3D('',#123004,#123005,#123006); +#123004 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#123005 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#123006 = DIRECTION('',(0.,0.,1.)); +#123007 = ADVANCED_FACE('',(#123008),#123019,.T.); +#123008 = FACE_BOUND('',#123009,.T.); +#123009 = EDGE_LOOP('',(#123010,#123016,#123017,#123018)); +#123010 = ORIENTED_EDGE('',*,*,#123011,.T.); +#123011 = EDGE_CURVE('',#122458,#122531,#123012,.T.); +#123012 = LINE('',#123013,#123014); +#123013 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#123014 = VECTOR('',#123015,1.); +#123015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#123016 = ORIENTED_EDGE('',*,*,#122538,.T.); +#123017 = ORIENTED_EDGE('',*,*,#122994,.F.); +#123018 = ORIENTED_EDGE('',*,*,#122465,.F.); +#123019 = PLANE('',#123020); +#123020 = AXIS2_PLACEMENT_3D('',#123021,#123022,#123023); +#123021 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#123022 = DIRECTION('',(0.,0.,1.)); +#123023 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#123024 = ADVANCED_FACE('',(#123025),#123031,.T.); +#123025 = FACE_BOUND('',#123026,.T.); +#123026 = EDGE_LOOP('',(#123027,#123028,#123029,#123030)); +#123027 = ORIENTED_EDGE('',*,*,#122565,.T.); +#123028 = ORIENTED_EDGE('',*,*,#122530,.T.); +#123029 = ORIENTED_EDGE('',*,*,#123011,.F.); +#123030 = ORIENTED_EDGE('',*,*,#122457,.F.); +#123031 = PLANE('',#123032); +#123032 = AXIS2_PLACEMENT_3D('',#123033,#123034,#123035); +#123033 = CARTESIAN_POINT('',(-0.1,-0.25,7.35)); +#123034 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#123035 = DIRECTION('',(0.,0.,-1.)); +#123036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#123040)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#123037,#123038,#123039)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#123037 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#123038 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#123039 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#123040 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#123037, + 'distance_accuracy_value','confusion accuracy'); +#123041 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#123042,#123044); +#123042 = ( REPRESENTATION_RELATIONSHIP('','',#114993,#114970) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#123043) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#123043 = ITEM_DEFINED_TRANSFORMATION('','',#11,#114971); +#123044 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #123045); +#123045 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('156','=>[0:1:1:68]','',#114965 + ,#114988,$); +#123046 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#114990)); +#123047 = SHAPE_DEFINITION_REPRESENTATION(#123048,#123054); +#123048 = PRODUCT_DEFINITION_SHAPE('','',#123049); +#123049 = PRODUCT_DEFINITION('design','',#123050,#123053); +#123050 = PRODUCT_DEFINITION_FORMATION('','',#123051); +#123051 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_silkscreen', + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_silkscreen','',(#123052) + ); +#123052 = PRODUCT_CONTEXT('',#2,'mechanical'); +#123053 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#123054 = SHAPE_REPRESENTATION('',(#11,#123055,#123123,#123167,#123413, + #123515,#124074,#124374,#124635,#125679,#126000,#126102,#126389, + #126676,#126963,#127185,#127312,#127439,#127566,#127674,#127752, + #127926,#128107,#128185,#128383,#128557,#129043,#129472,#129626, + #129668,#130007,#130059,#130111,#130205,#130485,#130734,#130869, + #130996,#131252,#131524,#131667,#131719,#131771,#131965,#132059, + #132103,#132254,#132380,#132597,#132807,#132958,#133084,#133227, + #133312,#133454,#133581,#133853,#134037,#134122,#134316,#134360, + #134512,#134606,#134842,#134984,#135162,#135340,#135481,#135625, + #135769,#135821,#135873,#135925,#135977,#136121,#136265,#136342, + #136427,#136496,#136944,#137127,#137269,#137393,#137545,#137678, + #137796,#137924,#138118,#138260,#138388,#138531,#138828,#139011, + #139055,#139197,#139404,#139448,#139641,#139784,#139978,#140046, + #140124,#140168,#140262,#140306,#140350,#140394,#140438,#140506, + #140575,#140703,#140770,#140896,#140940,#140984,#141028,#141206, + #141274,#141441,#141612,#141805,#141998,#142067,#142270,#142422, + #142584,#142809,#142853,#142955,#142999,#143177,#143229,#143396, + #143589,#143741,#143903,#144128,#144172,#144216,#144260,#144304, + #144348,#144392,#144436,#144480,#144524,#144568,#144612,#144656, + #144700,#144810,#144854,#144898,#144942,#144986,#145053,#145097, + #145141,#145185,#145229,#145273,#145317,#145361,#145528,#145695, + #145837,#146008,#146179,#146350,#146521,#146692,#146863,#147034, + #147205,#147376,#147476,#147669,#147862,#147931,#148134,#148365, + #148543,#148764,#149077,#149280,#149446,#149596,#149739,#149882, + #150076,#150288,#150482,#150632,#150826,#150976,#151119,#151325, + #151400,#151444,#151622,#151699,#152147,#152314,#152485,#152651, + #152761,#152992,#153077,#153298,#153342,#153436,#153692,#153948, + #154228,#154272,#154396,#154585,#154943,#155238,#155588,#155883, + #156206,#156478,#156703,#156829,#156964,#157072,#157180,#157274, + #157530,#157590,#157869,#157929,#158208,#158285,#158499,#158699, + #158793,#158975,#159142,#159335,#159552,#159845,#159875,#159919, + #159963,#160007,#160051,#160153,#160254,#160355,#160399,#160443, + #160487,#160531,#160854,#161006,#161148,#161319,#161490,#161661, + #161832,#162026,#162229,#162432,#162660,#162881,#163102,#163154, + #163296,#163373,#163511,#163579,#163623,#163667,#163818,#163953, + #164047,#164091,#164135,#164328,#164658,#164801,#164911,#164955, + #164999,#165150,#165202,#165254,#165425,#165628,#165941,#166134, + #166328,#166471,#166515,#166559,#166603,#166647,#166691,#166735, + #166779,#166823,#166899,#167041,#167208,#167401,#167594,#167788, + #167982,#168176,#168220,#168264,#168308,#168352,#168396,#168440, + #168607,#168733,#168940,#169134,#169312,#169494,#169676,#169818, + #169985,#170156,#170327,#170498,#170669,#170840,#171011,#171304, + #171507,#171710,#171913,#172125,#172346,#172558,#172645,#172865, + #172909,#173003,#173047,#173091,#173262,#173331,#173575,#173742, + #173982,#174076,#174214,#174357,#174434,#174536,#174984,#175028, + #175221,#175265,#175528,#175721,#175915,#176127,#176171,#176248, + #176325,#176369,#176421,#176572,#176624,#176676,#176818,#177011, + #177205,#177292,#177360,#177404,#177624,#177718,#177930,#177974, + #178152,#178254,#178447,#178641,#178844,#179022,#179066,#179110, + #179154,#179382,#179712,#179879,#180050,#180253,#180396,#180624, + #180736,#180848,#180892,#180936,#181222,#181316,#181454,#181648, + #181799,#181991,#182117,#182375,#182718,#182910,#183036,#183294, + #183362,#183456,#183525,#183594,#183746,#183790,#183877,#184180, + #184382,#184602,#184874,#185002,#185223,#185267,#185474,#185755, + #185898,#186069,#186272,#186466,#186568,#186612,#186865,#187137, + #187257,#187424,#187518,#187656,#187774,#187818,#188141,#188171, + #188264,#188308,#188561,#188833,#188953,#189071,#189198,#189267, + #189461,#189563,#189705,#189876,#190148,#190397,#190564,#190641, + #190779,#191028,#191261,#191501,#191545,#191597,#191819,#191945, + #192203,#192456,#192525,#192797,#192917,#192969,#193013,#193107, + #193175,#193219,#193549,#193666,#193733,#193802,#194003,#194088, + #194132,#194176,#194279,#194494,#194665,#194765,#194990,#195221, + #195399,#195509,#195619,#195746,#195873,#196067,#196339,#196416, + #196493,#196537,#196985,#197178,#197414,#197621,#197824,#197980, + #198172,#198298,#198556,#198658,#198777,#199026,#199178,#199313, + #199497,#199591,#199726,#199836,#200030,#200149,#200201,#200343, + #200521,#200686,#200780,#200918,#201053,#201231,#201411,#201589, + #201773,#201817,#201869,#202081,#202330,#202440,#202634,#202914, + #202966,#203167,#203447,#203715,#203995,#204263,#204531,#204799, + #205067,#205177,#205312,#205662,#205872,#205982,#206059,#206186, + #206271,#206356,#206457,#206658,#206768,#206862,#206997,#207175, + #207252,#207436,#207521,#207598,#207675,#207752,#207829,#207914, + #207999,#208242,#208345,#208430,#208597,#208791,#208985,#209095, + #209230,#209373,#209467,#209560,#209663,#209831,#209941,#210112, + #210172,#210366,#210550,#210627,#210739,#210817,#210886,#211027, + #211229,#211431,#211574,#211618,#211696,#211765,#211834,#211903, + #212086,#212130,#212207,#212447,#212895,#212989,#213083,#213152, + #213465,#213693,#213864,#213924,#214057,#214235,#214353,#214505, + #214583,#214627,#214778,#214830,#214882,#215165,#215209,#215421, + #215563,#215756,#215968,#216118,#216185,#216455,#216567,#216751, + #217109,#217381,#217704,#217830,#217965,#218220,#218297,#218448, + #218662,#218764,#218907,#219065,#219223,#219308,#219508,#219568, + #219653,#219738,#219946,#219990,#220100,#220202,#220279,#220727, + #220771,#220978,#221199,#221293,#221623,#221765,#221936,#222079, + #222221,#222273,#222603,#222671,#222874,#222976,#223070,#223164, + #223266,#223310,#223412,#223464,#223794,#224015,#224067,#224135, + #224203,#224247,#224341,#224519,#224571,#224742,#224852,#225101, + #225195,#225263,#225307,#225351,#225395,#225439,#225533,#225627, + #225729,#225936,#226192,#226402,#226544,#226751,#226963,#227115, + #227159,#227203,#227247,#227291,#227376,#227560,#227702,#227869, + #228011,#228178,#228349,#228520,#228691,#228862,#229093,#229259, + #229490,#229656,#229892,#229969,#230114,#230292,#230370,#230537, + #230665,#230734,#230916,#230985,#231127,#231320,#231372,#231424, + #231534,#231602,#231702,#231794,#232025,#232135,#232279,#232414, + #232608,#232857,#232951,#233045,#233313,#233562,#233672,#233840, + #233884,#234094,#234272,#234357,#234499,#234625,#234874,#235036, + #235113,#235198,#235283,#235451,#235731,#235909,#235961,#236013, + #236065,#236150,#236351,#236403,#236506,#236591,#236758,#236852, + #236987,#237196,#237390,#237568,#237686,#237821,#237906,#238018, + #238112,#238392,#238672,#238850,#238935,#239136,#239320,#239397, + #239521,#239565,#239650,#239816,#239949,#240059,#240339,#240458, + #240502,#240694,#240804,#240872,#240941,#241119,#241163,#241207, + #241537,#241679,#241891,#242033,#242175,#242368,#242462,#242547, + #242740,#242934,#243085,#243211,#243378,#243522,#243970,#244451, + #244899,#245347,#245498,#245624,#245766,#245923,#246085,#246137, + #246189,#246233,#246277,#246321,#246365,#246574,#246618,#246662, + #246706,#246750,#246794,#246936,#247103,#247274,#247445,#247616, + #247787,#248032,#248277,#248522,#248716,#248961,#249104,#249342, + #249535,#249604,#249656,#249708,#249752,#249796,#249840,#250023, + #250099,#250193,#250287,#250381,#250475,#250658,#250727,#250796, + #250865,#250934,#250978,#251022,#251066,#251259,#251303,#251429, + #251623,#251805,#251972,#252139,#252281,#252452,#252623,#252816, + #253010,#253303,#253515,#253657,#253759,#253961,#254103,#254270, + #254412,#254554,#254692,#254895,#255033,#255227,#255365,#255503, + #255645,#255812,#256019,#256226,#256433,#256640,#256885,#257130, + #257375,#257569,#257814),#257957); +#123055 = SHELL_BASED_SURFACE_MODEL('',(#123056)); +#123056 = OPEN_SHELL('',(#123057)); +#123057 = ADVANCED_FACE('',(#123058),#123118,.T.); +#123058 = FACE_BOUND('',#123059,.F.); +#123059 = EDGE_LOOP('',(#123060,#123071,#123079,#123087,#123095,#123103, + #123112)); +#123060 = ORIENTED_EDGE('',*,*,#123061,.T.); +#123061 = EDGE_CURVE('',#123062,#123064,#123066,.T.); +#123062 = VERTEX_POINT('',#123063); +#123063 = CARTESIAN_POINT('',(172.25165,-139.2131,1.585)); +#123064 = VERTEX_POINT('',#123065); +#123065 = CARTESIAN_POINT('',(172.202988,-139.118,1.585)); +#123066 = CIRCLE('',#123067,6.000053001949E-02); +#123067 = AXIS2_PLACEMENT_3D('',#123068,#123069,#123070); +#123068 = CARTESIAN_POINT('',(172.25165103329,-139.1530994699,1.585)); +#123069 = DIRECTION('',(0.,0.,-1.)); +#123070 = DIRECTION('',(-1.722136500322E-05,-0.999999999852,-0.)); +#123071 = ORIENTED_EDGE('',*,*,#123072,.T.); +#123072 = EDGE_CURVE('',#123064,#123073,#123075,.T.); +#123073 = VERTEX_POINT('',#123074); +#123074 = CARTESIAN_POINT('',(172.642988,-138.508,1.585)); +#123075 = LINE('',#123076,#123077); +#123076 = CARTESIAN_POINT('',(172.202988,-139.118,1.585)); +#123077 = VECTOR('',#123078,1.); +#123078 = DIRECTION('',(0.5850050123,0.811029676143,0.)); +#123079 = ORIENTED_EDGE('',*,*,#123080,.T.); +#123080 = EDGE_CURVE('',#123073,#123081,#123083,.T.); +#123081 = VERTEX_POINT('',#123082); +#123082 = CARTESIAN_POINT('',(172.682061,-138.483871,1.585)); +#123083 = LINE('',#123084,#123085); +#123084 = CARTESIAN_POINT('',(172.642988,-138.508,1.585)); +#123085 = VECTOR('',#123086,1.); +#123086 = DIRECTION('',(0.850840086953,0.52542472956,0.)); +#123087 = ORIENTED_EDGE('',*,*,#123088,.T.); +#123088 = EDGE_CURVE('',#123081,#123089,#123091,.T.); +#123089 = VERTEX_POINT('',#123090); +#123090 = CARTESIAN_POINT('',(172.72675,-138.494438,1.585)); +#123091 = LINE('',#123092,#123093); +#123092 = CARTESIAN_POINT('',(172.682061,-138.483871,1.585)); +#123093 = VECTOR('',#123094,1.); +#123094 = DIRECTION('',(0.973164400763,-0.230110949515,0.)); +#123095 = ORIENTED_EDGE('',*,*,#123096,.T.); +#123096 = EDGE_CURVE('',#123089,#123097,#123099,.T.); +#123097 = VERTEX_POINT('',#123098); +#123098 = CARTESIAN_POINT('',(173.180312,-139.118,1.585)); +#123099 = LINE('',#123100,#123101); +#123100 = CARTESIAN_POINT('',(172.72675,-138.494438,1.585)); +#123101 = VECTOR('',#123102,1.); +#123102 = DIRECTION('',(0.58822459592,-0.808697610207,0.)); +#123103 = ORIENTED_EDGE('',*,*,#123104,.T.); +#123104 = EDGE_CURVE('',#123097,#123105,#123107,.T.); +#123105 = VERTEX_POINT('',#123106); +#123106 = CARTESIAN_POINT('',(173.13165,-139.2131,1.585)); +#123107 = CIRCLE('',#123108,5.999982350119E-02); +#123108 = AXIS2_PLACEMENT_3D('',#123109,#123110,#123111); +#123109 = CARTESIAN_POINT('',(173.13165034744,-139.1531001765,1.585)); +#123110 = DIRECTION('',(0.,0.,-1.)); +#123111 = DIRECTION('',(0.811029928428,0.585004662541,0.)); +#123112 = ORIENTED_EDGE('',*,*,#123113,.T.); +#123113 = EDGE_CURVE('',#123105,#123062,#123114,.T.); +#123114 = LINE('',#123115,#123116); +#123115 = CARTESIAN_POINT('',(173.13165,-139.2131,1.585)); +#123116 = VECTOR('',#123117,1.); +#123117 = DIRECTION('',(-1.,0.,0.)); +#123118 = PLANE('',#123119); +#123119 = AXIS2_PLACEMENT_3D('',#123120,#123121,#123122); +#123120 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123121 = DIRECTION('',(0.,0.,1.)); +#123122 = DIRECTION('',(1.,0.,-0.)); +#123123 = SHELL_BASED_SURFACE_MODEL('',(#123124)); +#123124 = OPEN_SHELL('',(#123125)); +#123125 = ADVANCED_FACE('',(#123126),#123162,.T.); +#123126 = FACE_BOUND('',#123127,.F.); +#123127 = EDGE_LOOP('',(#123128,#123139,#123147,#123156)); +#123128 = ORIENTED_EDGE('',*,*,#123129,.T.); +#123129 = EDGE_CURVE('',#123130,#123132,#123134,.T.); +#123130 = VERTEX_POINT('',#123131); +#123131 = CARTESIAN_POINT('',(200.19165,-138.8831,1.585)); +#123132 = VERTEX_POINT('',#123133); +#123133 = CARTESIAN_POINT('',(200.19165,-138.7631,1.585)); +#123134 = CIRCLE('',#123135,6.000000000042E-02); +#123135 = AXIS2_PLACEMENT_3D('',#123136,#123137,#123138); +#123136 = CARTESIAN_POINT('',(200.19164977441,-138.8231,1.585)); +#123137 = DIRECTION('',(0.,0.,-1.)); +#123138 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#123139 = ORIENTED_EDGE('',*,*,#123140,.T.); +#123140 = EDGE_CURVE('',#123132,#123141,#123143,.T.); +#123141 = VERTEX_POINT('',#123142); +#123142 = CARTESIAN_POINT('',(204.69165,-138.7631,1.585)); +#123143 = LINE('',#123144,#123145); +#123144 = CARTESIAN_POINT('',(200.19165,-138.7631,1.585)); +#123145 = VECTOR('',#123146,1.); +#123146 = DIRECTION('',(1.,0.,0.)); +#123147 = ORIENTED_EDGE('',*,*,#123148,.T.); +#123148 = EDGE_CURVE('',#123141,#123149,#123151,.T.); +#123149 = VERTEX_POINT('',#123150); +#123150 = CARTESIAN_POINT('',(204.69165,-138.8831,1.585)); +#123151 = CIRCLE('',#123152,6.000000000042E-02); +#123152 = AXIS2_PLACEMENT_3D('',#123153,#123154,#123155); +#123153 = CARTESIAN_POINT('',(204.69165022558,-138.8231,1.585)); +#123154 = DIRECTION('',(0.,0.,-1.)); +#123155 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#123156 = ORIENTED_EDGE('',*,*,#123157,.T.); +#123157 = EDGE_CURVE('',#123149,#123130,#123158,.T.); +#123158 = LINE('',#123159,#123160); +#123159 = CARTESIAN_POINT('',(204.69165,-138.8831,1.585)); +#123160 = VECTOR('',#123161,1.); +#123161 = DIRECTION('',(-1.,0.,0.)); +#123162 = PLANE('',#123163); +#123163 = AXIS2_PLACEMENT_3D('',#123164,#123165,#123166); +#123164 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123165 = DIRECTION('',(0.,0.,1.)); +#123166 = DIRECTION('',(1.,0.,-0.)); +#123167 = SHELL_BASED_SURFACE_MODEL('',(#123168)); +#123168 = OPEN_SHELL('',(#123169)); +#123169 = ADVANCED_FACE('',(#123170,#123306,#123340,#123374),#123408,.T. + ); +#123170 = FACE_BOUND('',#123171,.F.); +#123171 = EDGE_LOOP('',(#123172,#123183,#123191,#123200,#123208,#123217, + #123225,#123234,#123242,#123250,#123258,#123266,#123274,#123283, + #123291,#123300)); +#123172 = ORIENTED_EDGE('',*,*,#123173,.T.); +#123173 = EDGE_CURVE('',#123174,#123176,#123178,.T.); +#123174 = VERTEX_POINT('',#123175); +#123175 = CARTESIAN_POINT('',(170.01165,-128.5031,1.585)); +#123176 = VERTEX_POINT('',#123177); +#123177 = CARTESIAN_POINT('',(170.07165,-128.4431,1.585)); +#123178 = CIRCLE('',#123179,5.999932016268E-02); +#123179 = AXIS2_PLACEMENT_3D('',#123180,#123181,#123182); +#123180 = CARTESIAN_POINT('',(170.07164932015,-128.5030993201,1.585)); +#123181 = DIRECTION('',(0.,0.,-1.)); +#123182 = DIRECTION('',(-0.999999999936,-1.133081470031E-05,-0.)); +#123183 = ORIENTED_EDGE('',*,*,#123184,.T.); +#123184 = EDGE_CURVE('',#123176,#123185,#123187,.T.); +#123185 = VERTEX_POINT('',#123186); +#123186 = CARTESIAN_POINT('',(195.31165,-128.4431,1.585)); +#123187 = LINE('',#123188,#123189); +#123188 = CARTESIAN_POINT('',(170.07165,-128.4431,1.585)); +#123189 = VECTOR('',#123190,1.); +#123190 = DIRECTION('',(1.,0.,0.)); +#123191 = ORIENTED_EDGE('',*,*,#123192,.T.); +#123192 = EDGE_CURVE('',#123185,#123193,#123195,.T.); +#123193 = VERTEX_POINT('',#123194); +#123194 = CARTESIAN_POINT('',(195.37165,-128.5031,1.585)); +#123195 = CIRCLE('',#123196,5.999932016262E-02); +#123196 = AXIS2_PLACEMENT_3D('',#123197,#123198,#123199); +#123197 = CARTESIAN_POINT('',(195.31165067984,-128.5030993201,1.585)); +#123198 = DIRECTION('',(0.,0.,-1.)); +#123199 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#123200 = ORIENTED_EDGE('',*,*,#123201,.T.); +#123201 = EDGE_CURVE('',#123193,#123202,#123204,.T.); +#123202 = VERTEX_POINT('',#123203); +#123203 = CARTESIAN_POINT('',(195.37165,-138.5431,1.585)); +#123204 = LINE('',#123205,#123206); +#123205 = CARTESIAN_POINT('',(195.37165,-128.5031,1.585)); +#123206 = VECTOR('',#123207,1.); +#123207 = DIRECTION('',(0.,-1.,0.)); +#123208 = ORIENTED_EDGE('',*,*,#123209,.T.); +#123209 = EDGE_CURVE('',#123202,#123210,#123212,.T.); +#123210 = VERTEX_POINT('',#123211); +#123211 = CARTESIAN_POINT('',(195.31165,-138.6031,1.585)); +#123212 = CIRCLE('',#123213,5.999932016261E-02); +#123213 = AXIS2_PLACEMENT_3D('',#123214,#123215,#123216); +#123214 = CARTESIAN_POINT('',(195.31165067984,-138.5431006798,1.585)); +#123215 = DIRECTION('',(0.,0.,-1.)); +#123216 = DIRECTION('',(0.999999999936,1.133081612142E-05,0.)); +#123217 = ORIENTED_EDGE('',*,*,#123218,.T.); +#123218 = EDGE_CURVE('',#123210,#123219,#123221,.T.); +#123219 = VERTEX_POINT('',#123220); +#123220 = CARTESIAN_POINT('',(172.99165,-138.6031,1.585)); +#123221 = LINE('',#123222,#123223); +#123222 = CARTESIAN_POINT('',(195.31165,-138.6031,1.585)); +#123223 = VECTOR('',#123224,1.); +#123224 = DIRECTION('',(-1.,0.,0.)); +#123225 = ORIENTED_EDGE('',*,*,#123226,.T.); +#123226 = EDGE_CURVE('',#123219,#123227,#123229,.T.); +#123227 = VERTEX_POINT('',#123228); +#123228 = CARTESIAN_POINT('',(172.99165,-138.4831,1.585)); +#123229 = CIRCLE('',#123230,6.000000000042E-02); +#123230 = AXIS2_PLACEMENT_3D('',#123231,#123232,#123233); +#123231 = CARTESIAN_POINT('',(172.99164977441,-138.5431,1.585)); +#123232 = DIRECTION('',(0.,0.,-1.)); +#123233 = DIRECTION('',(3.75979377999E-06,-0.999999999993,0.)); +#123234 = ORIENTED_EDGE('',*,*,#123235,.T.); +#123235 = EDGE_CURVE('',#123227,#123236,#123238,.T.); +#123236 = VERTEX_POINT('',#123237); +#123237 = CARTESIAN_POINT('',(195.25165,-138.4831,1.585)); +#123238 = LINE('',#123239,#123240); +#123239 = CARTESIAN_POINT('',(172.99165,-138.4831,1.585)); +#123240 = VECTOR('',#123241,1.); +#123241 = DIRECTION('',(1.,0.,0.)); +#123242 = ORIENTED_EDGE('',*,*,#123243,.T.); +#123243 = EDGE_CURVE('',#123236,#123244,#123246,.T.); +#123244 = VERTEX_POINT('',#123245); +#123245 = CARTESIAN_POINT('',(195.25165,-137.9831,1.585)); +#123246 = LINE('',#123247,#123248); +#123247 = CARTESIAN_POINT('',(195.25165,-138.4831,1.585)); +#123248 = VECTOR('',#123249,1.); +#123249 = DIRECTION('',(0.,1.,0.)); +#123250 = ORIENTED_EDGE('',*,*,#123251,.T.); +#123251 = EDGE_CURVE('',#123244,#123252,#123254,.T.); +#123252 = VERTEX_POINT('',#123253); +#123253 = CARTESIAN_POINT('',(170.13165,-137.9831,1.585)); +#123254 = LINE('',#123255,#123256); +#123255 = CARTESIAN_POINT('',(195.25165,-137.9831,1.585)); +#123256 = VECTOR('',#123257,1.); +#123257 = DIRECTION('',(-1.,0.,0.)); +#123258 = ORIENTED_EDGE('',*,*,#123259,.T.); +#123259 = EDGE_CURVE('',#123252,#123260,#123262,.T.); +#123260 = VERTEX_POINT('',#123261); +#123261 = CARTESIAN_POINT('',(170.13165,-138.4831,1.585)); +#123262 = LINE('',#123263,#123264); +#123263 = CARTESIAN_POINT('',(170.13165,-137.9831,1.585)); +#123264 = VECTOR('',#123265,1.); +#123265 = DIRECTION('',(0.,-1.,0.)); +#123266 = ORIENTED_EDGE('',*,*,#123267,.T.); +#123267 = EDGE_CURVE('',#123260,#123268,#123270,.T.); +#123268 = VERTEX_POINT('',#123269); +#123269 = CARTESIAN_POINT('',(172.39165,-138.4831,1.585)); +#123270 = LINE('',#123271,#123272); +#123271 = CARTESIAN_POINT('',(170.13165,-138.4831,1.585)); +#123272 = VECTOR('',#123273,1.); +#123273 = DIRECTION('',(1.,0.,0.)); +#123274 = ORIENTED_EDGE('',*,*,#123275,.T.); +#123275 = EDGE_CURVE('',#123268,#123276,#123278,.T.); +#123276 = VERTEX_POINT('',#123277); +#123277 = CARTESIAN_POINT('',(172.39165,-138.6031,1.585)); +#123278 = CIRCLE('',#123279,6.000000000042E-02); +#123279 = AXIS2_PLACEMENT_3D('',#123280,#123281,#123282); +#123280 = CARTESIAN_POINT('',(172.39165022558,-138.5431,1.585)); +#123281 = DIRECTION('',(0.,0.,-1.)); +#123282 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#123283 = ORIENTED_EDGE('',*,*,#123284,.T.); +#123284 = EDGE_CURVE('',#123276,#123285,#123287,.T.); +#123285 = VERTEX_POINT('',#123286); +#123286 = CARTESIAN_POINT('',(170.07165,-138.6031,1.585)); +#123287 = LINE('',#123288,#123289); +#123288 = CARTESIAN_POINT('',(172.39165,-138.6031,1.585)); +#123289 = VECTOR('',#123290,1.); +#123290 = DIRECTION('',(-1.,0.,0.)); +#123291 = ORIENTED_EDGE('',*,*,#123292,.T.); +#123292 = EDGE_CURVE('',#123285,#123293,#123295,.T.); +#123293 = VERTEX_POINT('',#123294); +#123294 = CARTESIAN_POINT('',(170.01165,-138.5431,1.585)); +#123295 = CIRCLE('',#123296,5.999932016262E-02); +#123296 = AXIS2_PLACEMENT_3D('',#123297,#123298,#123299); +#123297 = CARTESIAN_POINT('',(170.07164932015,-138.5431006798,1.585)); +#123298 = DIRECTION('',(0.,0.,-1.)); +#123299 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#123300 = ORIENTED_EDGE('',*,*,#123301,.T.); +#123301 = EDGE_CURVE('',#123293,#123174,#123302,.T.); +#123302 = LINE('',#123303,#123304); +#123303 = CARTESIAN_POINT('',(170.01165,-138.5431,1.585)); +#123304 = VECTOR('',#123305,1.); +#123305 = DIRECTION('',(0.,1.,0.)); +#123306 = FACE_BOUND('',#123307,.F.); +#123307 = EDGE_LOOP('',(#123308,#123318,#123326,#123334)); +#123308 = ORIENTED_EDGE('',*,*,#123309,.T.); +#123309 = EDGE_CURVE('',#123310,#123312,#123314,.T.); +#123310 = VERTEX_POINT('',#123311); +#123311 = CARTESIAN_POINT('',(195.25165,-137.8631,1.585)); +#123312 = VERTEX_POINT('',#123313); +#123313 = CARTESIAN_POINT('',(195.25165,-136.4831,1.585)); +#123314 = LINE('',#123315,#123316); +#123315 = CARTESIAN_POINT('',(195.25165,-137.8631,1.585)); +#123316 = VECTOR('',#123317,1.); +#123317 = DIRECTION('',(0.,1.,0.)); +#123318 = ORIENTED_EDGE('',*,*,#123319,.T.); +#123319 = EDGE_CURVE('',#123312,#123320,#123322,.T.); +#123320 = VERTEX_POINT('',#123321); +#123321 = CARTESIAN_POINT('',(170.13165,-136.4831,1.585)); +#123322 = LINE('',#123323,#123324); +#123323 = CARTESIAN_POINT('',(195.25165,-136.4831,1.585)); +#123324 = VECTOR('',#123325,1.); +#123325 = DIRECTION('',(-1.,0.,0.)); +#123326 = ORIENTED_EDGE('',*,*,#123327,.T.); +#123327 = EDGE_CURVE('',#123320,#123328,#123330,.T.); +#123328 = VERTEX_POINT('',#123329); +#123329 = CARTESIAN_POINT('',(170.13165,-137.8631,1.585)); +#123330 = LINE('',#123331,#123332); +#123331 = CARTESIAN_POINT('',(170.13165,-136.4831,1.585)); +#123332 = VECTOR('',#123333,1.); +#123333 = DIRECTION('',(0.,-1.,0.)); +#123334 = ORIENTED_EDGE('',*,*,#123335,.T.); +#123335 = EDGE_CURVE('',#123328,#123310,#123336,.T.); +#123336 = LINE('',#123337,#123338); +#123337 = CARTESIAN_POINT('',(170.13165,-137.8631,1.585)); +#123338 = VECTOR('',#123339,1.); +#123339 = DIRECTION('',(1.,0.,0.)); +#123340 = FACE_BOUND('',#123341,.F.); +#123341 = EDGE_LOOP('',(#123342,#123352,#123360,#123368)); +#123342 = ORIENTED_EDGE('',*,*,#123343,.T.); +#123343 = EDGE_CURVE('',#123344,#123346,#123348,.T.); +#123344 = VERTEX_POINT('',#123345); +#123345 = CARTESIAN_POINT('',(195.25165,-136.3631,1.585)); +#123346 = VERTEX_POINT('',#123347); +#123347 = CARTESIAN_POINT('',(195.25165,-131.5831,1.585)); +#123348 = LINE('',#123349,#123350); +#123349 = CARTESIAN_POINT('',(195.25165,-136.3631,1.585)); +#123350 = VECTOR('',#123351,1.); +#123351 = DIRECTION('',(0.,1.,0.)); +#123352 = ORIENTED_EDGE('',*,*,#123353,.T.); +#123353 = EDGE_CURVE('',#123346,#123354,#123356,.T.); +#123354 = VERTEX_POINT('',#123355); +#123355 = CARTESIAN_POINT('',(170.13165,-131.5831,1.585)); +#123356 = LINE('',#123357,#123358); +#123357 = CARTESIAN_POINT('',(195.25165,-131.5831,1.585)); +#123358 = VECTOR('',#123359,1.); +#123359 = DIRECTION('',(-1.,0.,0.)); +#123360 = ORIENTED_EDGE('',*,*,#123361,.T.); +#123361 = EDGE_CURVE('',#123354,#123362,#123364,.T.); +#123362 = VERTEX_POINT('',#123363); +#123363 = CARTESIAN_POINT('',(170.13165,-136.3631,1.585)); +#123364 = LINE('',#123365,#123366); +#123365 = CARTESIAN_POINT('',(170.13165,-131.5831,1.585)); +#123366 = VECTOR('',#123367,1.); +#123367 = DIRECTION('',(0.,-1.,0.)); +#123368 = ORIENTED_EDGE('',*,*,#123369,.T.); +#123369 = EDGE_CURVE('',#123362,#123344,#123370,.T.); +#123370 = LINE('',#123371,#123372); +#123371 = CARTESIAN_POINT('',(170.13165,-136.3631,1.585)); +#123372 = VECTOR('',#123373,1.); +#123373 = DIRECTION('',(1.,0.,0.)); +#123374 = FACE_BOUND('',#123375,.F.); +#123375 = EDGE_LOOP('',(#123376,#123386,#123394,#123402)); +#123376 = ORIENTED_EDGE('',*,*,#123377,.T.); +#123377 = EDGE_CURVE('',#123378,#123380,#123382,.T.); +#123378 = VERTEX_POINT('',#123379); +#123379 = CARTESIAN_POINT('',(195.25165,-131.4631,1.585)); +#123380 = VERTEX_POINT('',#123381); +#123381 = CARTESIAN_POINT('',(195.25165,-128.5631,1.585)); +#123382 = LINE('',#123383,#123384); +#123383 = CARTESIAN_POINT('',(195.25165,-131.4631,1.585)); +#123384 = VECTOR('',#123385,1.); +#123385 = DIRECTION('',(0.,1.,0.)); +#123386 = ORIENTED_EDGE('',*,*,#123387,.T.); +#123387 = EDGE_CURVE('',#123380,#123388,#123390,.T.); +#123388 = VERTEX_POINT('',#123389); +#123389 = CARTESIAN_POINT('',(170.13165,-128.5631,1.585)); +#123390 = LINE('',#123391,#123392); +#123391 = CARTESIAN_POINT('',(195.25165,-128.5631,1.585)); +#123392 = VECTOR('',#123393,1.); +#123393 = DIRECTION('',(-1.,0.,0.)); +#123394 = ORIENTED_EDGE('',*,*,#123395,.T.); +#123395 = EDGE_CURVE('',#123388,#123396,#123398,.T.); +#123396 = VERTEX_POINT('',#123397); +#123397 = CARTESIAN_POINT('',(170.13165,-131.4631,1.585)); +#123398 = LINE('',#123399,#123400); +#123399 = CARTESIAN_POINT('',(170.13165,-128.5631,1.585)); +#123400 = VECTOR('',#123401,1.); +#123401 = DIRECTION('',(0.,-1.,0.)); +#123402 = ORIENTED_EDGE('',*,*,#123403,.T.); +#123403 = EDGE_CURVE('',#123396,#123378,#123404,.T.); +#123404 = LINE('',#123405,#123406); +#123405 = CARTESIAN_POINT('',(170.13165,-131.4631,1.585)); +#123406 = VECTOR('',#123407,1.); +#123407 = DIRECTION('',(1.,0.,0.)); +#123408 = PLANE('',#123409); +#123409 = AXIS2_PLACEMENT_3D('',#123410,#123411,#123412); +#123410 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123411 = DIRECTION('',(0.,0.,1.)); +#123412 = DIRECTION('',(1.,0.,-0.)); +#123413 = SHELL_BASED_SURFACE_MODEL('',(#123414)); +#123414 = OPEN_SHELL('',(#123415)); +#123415 = ADVANCED_FACE('',(#123416),#123510,.T.); +#123416 = FACE_BOUND('',#123417,.F.); +#123417 = EDGE_LOOP('',(#123418,#123429,#123437,#123445,#123453,#123462, + #123470,#123479,#123487,#123496,#123504)); +#123418 = ORIENTED_EDGE('',*,*,#123419,.T.); +#123419 = EDGE_CURVE('',#123420,#123422,#123424,.T.); +#123420 = VERTEX_POINT('',#123421); +#123421 = CARTESIAN_POINT('',(159.499567,-135.402039,1.585)); +#123422 = VERTEX_POINT('',#123423); +#123423 = CARTESIAN_POINT('',(159.615,-135.425,1.585)); +#123424 = CIRCLE('',#123425,6.000007318646E-02); +#123425 = AXIS2_PLACEMENT_3D('',#123426,#123427,#123428); +#123426 = CARTESIAN_POINT('',(159.55499992681,-135.4249998233,1.585)); +#123427 = DIRECTION('',(0.,0.,-1.)); +#123428 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#123429 = ORIENTED_EDGE('',*,*,#123430,.T.); +#123430 = EDGE_CURVE('',#123422,#123431,#123433,.T.); +#123431 = VERTEX_POINT('',#123432); +#123432 = CARTESIAN_POINT('',(159.615,-138.095,1.585)); +#123433 = LINE('',#123434,#123435); +#123434 = CARTESIAN_POINT('',(159.615,-135.425,1.585)); +#123435 = VECTOR('',#123436,1.); +#123436 = DIRECTION('',(0.,-1.,0.)); +#123437 = ORIENTED_EDGE('',*,*,#123438,.T.); +#123438 = EDGE_CURVE('',#123431,#123439,#123441,.T.); +#123439 = VERTEX_POINT('',#123440); +#123440 = CARTESIAN_POINT('',(168.685,-138.095,1.585)); +#123441 = LINE('',#123442,#123443); +#123442 = CARTESIAN_POINT('',(159.615,-138.095,1.585)); +#123443 = VECTOR('',#123444,1.); +#123444 = DIRECTION('',(1.,0.,0.)); +#123445 = ORIENTED_EDGE('',*,*,#123446,.T.); +#123446 = EDGE_CURVE('',#123439,#123447,#123449,.T.); +#123447 = VERTEX_POINT('',#123448); +#123448 = CARTESIAN_POINT('',(168.685,-135.425,1.585)); +#123449 = LINE('',#123450,#123451); +#123450 = CARTESIAN_POINT('',(168.685,-138.095,1.585)); +#123451 = VECTOR('',#123452,1.); +#123452 = DIRECTION('',(0.,1.,0.)); +#123453 = ORIENTED_EDGE('',*,*,#123454,.T.); +#123454 = EDGE_CURVE('',#123447,#123455,#123457,.T.); +#123455 = VERTEX_POINT('',#123456); +#123456 = CARTESIAN_POINT('',(168.805,-135.425,1.585)); +#123457 = CIRCLE('',#123458,6.000000000043E-02); +#123458 = AXIS2_PLACEMENT_3D('',#123459,#123460,#123461); +#123459 = CARTESIAN_POINT('',(168.745,-135.4249997744,1.585)); +#123460 = DIRECTION('',(0.,0.,-1.)); +#123461 = DIRECTION('',(-0.999999999993,-3.759794253684E-06,-0.)); +#123462 = ORIENTED_EDGE('',*,*,#123463,.T.); +#123463 = EDGE_CURVE('',#123455,#123464,#123466,.T.); +#123464 = VERTEX_POINT('',#123465); +#123465 = CARTESIAN_POINT('',(168.805,-138.155,1.585)); +#123466 = LINE('',#123467,#123468); +#123467 = CARTESIAN_POINT('',(168.805,-135.425,1.585)); +#123468 = VECTOR('',#123469,1.); +#123469 = DIRECTION('',(0.,-1.,0.)); +#123470 = ORIENTED_EDGE('',*,*,#123471,.T.); +#123471 = EDGE_CURVE('',#123464,#123472,#123474,.T.); +#123472 = VERTEX_POINT('',#123473); +#123473 = CARTESIAN_POINT('',(168.745,-138.215,1.585)); +#123474 = CIRCLE('',#123475,5.999932016262E-02); +#123475 = AXIS2_PLACEMENT_3D('',#123476,#123477,#123478); +#123476 = CARTESIAN_POINT('',(168.74500067984,-138.1550006798,1.585)); +#123477 = DIRECTION('',(0.,0.,-1.)); +#123478 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#123479 = ORIENTED_EDGE('',*,*,#123480,.T.); +#123480 = EDGE_CURVE('',#123472,#123481,#123483,.T.); +#123481 = VERTEX_POINT('',#123482); +#123482 = CARTESIAN_POINT('',(159.555,-138.215,1.585)); +#123483 = LINE('',#123484,#123485); +#123484 = CARTESIAN_POINT('',(168.745,-138.215,1.585)); +#123485 = VECTOR('',#123486,1.); +#123486 = DIRECTION('',(-1.,0.,0.)); +#123487 = ORIENTED_EDGE('',*,*,#123488,.T.); +#123488 = EDGE_CURVE('',#123481,#123489,#123491,.T.); +#123489 = VERTEX_POINT('',#123490); +#123490 = CARTESIAN_POINT('',(159.495,-138.155,1.585)); +#123491 = CIRCLE('',#123492,5.999932016262E-02); +#123492 = AXIS2_PLACEMENT_3D('',#123493,#123494,#123495); +#123493 = CARTESIAN_POINT('',(159.55499932015,-138.1550006798,1.585)); +#123494 = DIRECTION('',(0.,0.,-1.)); +#123495 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#123496 = ORIENTED_EDGE('',*,*,#123497,.T.); +#123497 = EDGE_CURVE('',#123489,#123498,#123500,.T.); +#123498 = VERTEX_POINT('',#123499); +#123499 = CARTESIAN_POINT('',(159.495,-135.425,1.585)); +#123500 = LINE('',#123501,#123502); +#123501 = CARTESIAN_POINT('',(159.495,-138.155,1.585)); +#123502 = VECTOR('',#123503,1.); +#123503 = DIRECTION('',(0.,1.,0.)); +#123504 = ORIENTED_EDGE('',*,*,#123505,.T.); +#123505 = EDGE_CURVE('',#123498,#123420,#123506,.T.); +#123506 = LINE('',#123507,#123508); +#123507 = CARTESIAN_POINT('',(159.495,-135.425,1.585)); +#123508 = VECTOR('',#123509,1.); +#123509 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#123510 = PLANE('',#123511); +#123511 = AXIS2_PLACEMENT_3D('',#123512,#123513,#123514); +#123512 = CARTESIAN_POINT('',(0.,0.,1.585)); +#123513 = DIRECTION('',(0.,0.,1.)); +#123514 = DIRECTION('',(1.,0.,-0.)); +#123515 = SHELL_BASED_SURFACE_MODEL('',(#123516)); +#123516 = OPEN_SHELL('',(#123517)); +#123517 = ADVANCED_FACE('',(#123518,#123954),#124069,.T.); +#123518 = FACE_BOUND('',#123519,.F.); +#123519 = EDGE_LOOP('',(#123520,#123531,#123539,#123547,#123555,#123563, + #123571,#123579,#123587,#123595,#123603,#123611,#123619,#123627, + #123635,#123643,#123651,#123659,#123667,#123675,#123683,#123691, + #123699,#123707,#123715,#123724,#123732,#123740,#123748,#123756, + #123764,#123772,#123780,#123788,#123796,#123804,#123812,#123820, + #123828,#123836,#123844,#123852,#123860,#123868,#123876,#123884, + #123892,#123900,#123908,#123916,#123924,#123932,#123940,#123948)); +#123520 = ORIENTED_EDGE('',*,*,#123521,.T.); +#123521 = EDGE_CURVE('',#123522,#123524,#123526,.T.); +#123522 = VERTEX_POINT('',#123523); +#123523 = CARTESIAN_POINT('',(103.930742,-135.240275,1.585)); +#123524 = VERTEX_POINT('',#123525); +#123525 = CARTESIAN_POINT('',(104.472379,-134.679957,1.585)); +#123526 = CIRCLE('',#123527,1.258975264585); +#123527 = AXIS2_PLACEMENT_3D('',#123528,#123529,#123530); +#123528 = CARTESIAN_POINT('',(105.06230596647,-135.7921642158,1.585)); +#123529 = DIRECTION('',(0.,0.,-1.)); +#123530 = DIRECTION('',(-0.898797616052,0.438363827635,0.)); +#123531 = ORIENTED_EDGE('',*,*,#123532,.T.); +#123532 = EDGE_CURVE('',#123524,#123533,#123535,.T.); +#123533 = VERTEX_POINT('',#123534); +#123534 = CARTESIAN_POINT('',(104.696506,-134.605251,1.585)); +#123535 = LINE('',#123536,#123537); +#123536 = CARTESIAN_POINT('',(104.472379,-134.679957,1.585)); +#123537 = VECTOR('',#123538,1.); +#123538 = DIRECTION('',(0.948687107511,0.316216337406,0.)); +#123539 = ORIENTED_EDGE('',*,*,#123540,.T.); +#123540 = EDGE_CURVE('',#123533,#123541,#123543,.T.); +#123541 = VERTEX_POINT('',#123542); +#123542 = CARTESIAN_POINT('',(105.1074,-134.58657,1.585)); +#123543 = LINE('',#123544,#123545); +#123544 = CARTESIAN_POINT('',(104.696506,-134.605251,1.585)); +#123545 = VECTOR('',#123546,1.); +#123546 = DIRECTION('',(0.998968099037,4.541736569073E-02,0.)); +#123547 = ORIENTED_EDGE('',*,*,#123548,.T.); +#123548 = EDGE_CURVE('',#123541,#123549,#123551,.T.); +#123549 = VERTEX_POINT('',#123550); +#123550 = CARTESIAN_POINT('',(105.126078,-134.605251,1.585)); +#123551 = LINE('',#123552,#123553); +#123552 = CARTESIAN_POINT('',(105.1074,-134.58657,1.585)); +#123553 = VECTOR('',#123554,1.); +#123554 = DIRECTION('',(0.707049996864,-0.70716356095,0.)); +#123555 = ORIENTED_EDGE('',*,*,#123556,.T.); +#123556 = EDGE_CURVE('',#123549,#123557,#123559,.T.); +#123557 = VERTEX_POINT('',#123558); +#123558 = CARTESIAN_POINT('',(105.238146,-134.605251,1.585)); +#123559 = LINE('',#123560,#123561); +#123560 = CARTESIAN_POINT('',(105.126078,-134.605251,1.585)); +#123561 = VECTOR('',#123562,1.); +#123562 = DIRECTION('',(1.,0.,0.)); +#123563 = ORIENTED_EDGE('',*,*,#123564,.T.); +#123564 = EDGE_CURVE('',#123557,#123565,#123567,.T.); +#123565 = VERTEX_POINT('',#123566); +#123566 = CARTESIAN_POINT('',(105.462266,-134.679957,1.585)); +#123567 = LINE('',#123568,#123569); +#123568 = CARTESIAN_POINT('',(105.238146,-134.605251,1.585)); +#123569 = VECTOR('',#123570,1.); +#123570 = DIRECTION('',(0.948684144633,-0.316225226258,0.)); +#123571 = ORIENTED_EDGE('',*,*,#123572,.T.); +#123572 = EDGE_CURVE('',#123565,#123573,#123575,.T.); +#123573 = VERTEX_POINT('',#123574); +#123574 = CARTESIAN_POINT('',(105.705072,-134.848052,1.585)); +#123575 = LINE('',#123576,#123577); +#123576 = CARTESIAN_POINT('',(105.462266,-134.679957,1.585)); +#123577 = VECTOR('',#123578,1.); +#123578 = DIRECTION('',(0.822194507811,-0.56920663324,0.)); +#123579 = ORIENTED_EDGE('',*,*,#123580,.T.); +#123580 = EDGE_CURVE('',#123573,#123581,#123583,.T.); +#123581 = VERTEX_POINT('',#123582); +#123582 = CARTESIAN_POINT('',(105.723753,-134.829375,1.585)); +#123583 = LINE('',#123584,#123585); +#123584 = CARTESIAN_POINT('',(105.705072,-134.848052,1.585)); +#123585 = VECTOR('',#123586,1.); +#123586 = DIRECTION('',(0.70718248855,0.707031065716,0.)); +#123587 = ORIENTED_EDGE('',*,*,#123588,.T.); +#123588 = EDGE_CURVE('',#123581,#123589,#123591,.T.); +#123589 = VERTEX_POINT('',#123590); +#123590 = CARTESIAN_POINT('',(105.742426,-134.642604,1.585)); +#123591 = LINE('',#123592,#123593); +#123592 = CARTESIAN_POINT('',(105.723753,-134.829375,1.585)); +#123593 = VECTOR('',#123594,1.); +#123594 = DIRECTION('',(9.948209214608E-02,0.99503935266,0.)); +#123595 = ORIENTED_EDGE('',*,*,#123596,.T.); +#123596 = EDGE_CURVE('',#123589,#123597,#123599,.T.); +#123597 = VERTEX_POINT('',#123598); +#123598 = CARTESIAN_POINT('',(106.489516,-134.642604,1.585)); +#123599 = LINE('',#123600,#123601); +#123600 = CARTESIAN_POINT('',(105.742426,-134.642604,1.585)); +#123601 = VECTOR('',#123602,1.); +#123602 = DIRECTION('',(1.,0.,0.)); +#123603 = ORIENTED_EDGE('',*,*,#123604,.T.); +#123604 = EDGE_CURVE('',#123597,#123605,#123607,.T.); +#123605 = VERTEX_POINT('',#123606); +#123606 = CARTESIAN_POINT('',(106.526866,-134.679957,1.585)); +#123607 = LINE('',#123608,#123609); +#123608 = CARTESIAN_POINT('',(106.489516,-134.642604,1.585)); +#123609 = VECTOR('',#123610,1.); +#123610 = DIRECTION('',(0.707078383894,-0.707135177339,0.)); +#123611 = ORIENTED_EDGE('',*,*,#123612,.T.); +#123612 = EDGE_CURVE('',#123605,#123613,#123615,.T.); +#123613 = VERTEX_POINT('',#123614); +#123614 = CARTESIAN_POINT('',(106.526866,-137.201372,1.585)); +#123615 = LINE('',#123616,#123617); +#123616 = CARTESIAN_POINT('',(106.526866,-134.679957,1.585)); +#123617 = VECTOR('',#123618,1.); +#123618 = DIRECTION('',(0.,-1.,0.)); +#123619 = ORIENTED_EDGE('',*,*,#123620,.T.); +#123620 = EDGE_CURVE('',#123613,#123621,#123623,.T.); +#123621 = VERTEX_POINT('',#123622); +#123622 = CARTESIAN_POINT('',(106.452164,-137.518882,1.585)); +#123623 = LINE('',#123624,#123625); +#123624 = CARTESIAN_POINT('',(106.526866,-137.201372,1.585)); +#123625 = VECTOR('',#123626,1.); +#123626 = DIRECTION('',(-0.22902122035,-0.973421430126,0.)); +#123627 = ORIENTED_EDGE('',*,*,#123628,.T.); +#123628 = EDGE_CURVE('',#123621,#123629,#123631,.T.); +#123629 = VERTEX_POINT('',#123630); +#123630 = CARTESIAN_POINT('',(106.321416,-137.743011,1.585)); +#123631 = LINE('',#123632,#123633); +#123632 = CARTESIAN_POINT('',(106.452164,-137.518882,1.585)); +#123633 = VECTOR('',#123634,1.); +#123634 = DIRECTION('',(-0.503888517692,-0.863768696896,0.)); +#123635 = ORIENTED_EDGE('',*,*,#123636,.T.); +#123636 = EDGE_CURVE('',#123629,#123637,#123639,.T.); +#123637 = VERTEX_POINT('',#123638); +#123638 = CARTESIAN_POINT('',(106.13465,-137.929779,1.585)); +#123639 = LINE('',#123640,#123641); +#123640 = CARTESIAN_POINT('',(106.321416,-137.743011,1.585)); +#123641 = VECTOR('',#123642,1.); +#123642 = DIRECTION('',(-0.707102995139,-0.707110567213,0.)); +#123643 = ORIENTED_EDGE('',*,*,#123644,.T.); +#123644 = EDGE_CURVE('',#123637,#123645,#123647,.T.); +#123645 = VERTEX_POINT('',#123646); +#123646 = CARTESIAN_POINT('',(105.854494,-138.097875,1.585)); +#123647 = LINE('',#123648,#123649); +#123648 = CARTESIAN_POINT('',(106.13465,-137.929779,1.585)); +#123649 = VECTOR('',#123650,1.); +#123650 = DIRECTION('',(-0.857489684893,-0.514501156755,0.)); +#123651 = ORIENTED_EDGE('',*,*,#123652,.T.); +#123652 = EDGE_CURVE('',#123645,#123653,#123655,.T.); +#123653 = VERTEX_POINT('',#123654); +#123654 = CARTESIAN_POINT('',(105.518299,-138.191255,1.585)); +#123655 = LINE('',#123656,#123657); +#123656 = CARTESIAN_POINT('',(105.854494,-138.097875,1.585)); +#123657 = VECTOR('',#123658,1.); +#123658 = DIRECTION('',(-0.963523452481,-0.267623908722,0.)); +#123659 = ORIENTED_EDGE('',*,*,#123660,.T.); +#123660 = EDGE_CURVE('',#123653,#123661,#123663,.T.); +#123661 = VERTEX_POINT('',#123662); +#123662 = CARTESIAN_POINT('',(105.387565,-138.191255,1.585)); +#123663 = LINE('',#123664,#123665); +#123664 = CARTESIAN_POINT('',(105.518299,-138.191255,1.585)); +#123665 = VECTOR('',#123666,1.); +#123666 = DIRECTION('',(-1.,0.,0.)); +#123667 = ORIENTED_EDGE('',*,*,#123668,.T.); +#123668 = EDGE_CURVE('',#123661,#123669,#123671,.T.); +#123669 = VERTEX_POINT('',#123670); +#123670 = CARTESIAN_POINT('',(105.36888,-138.20994,1.585)); +#123671 = LINE('',#123672,#123673); +#123672 = CARTESIAN_POINT('',(105.387565,-138.191255,1.585)); +#123673 = VECTOR('',#123674,1.); +#123674 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#123675 = ORIENTED_EDGE('',*,*,#123676,.T.); +#123676 = EDGE_CURVE('',#123669,#123677,#123679,.T.); +#123677 = VERTEX_POINT('',#123678); +#123678 = CARTESIAN_POINT('',(104.920629,-138.20994,1.585)); +#123679 = LINE('',#123680,#123681); +#123680 = CARTESIAN_POINT('',(105.36888,-138.20994,1.585)); +#123681 = VECTOR('',#123682,1.); +#123682 = DIRECTION('',(-1.,0.,0.)); +#123683 = ORIENTED_EDGE('',*,*,#123684,.T.); +#123684 = EDGE_CURVE('',#123677,#123685,#123687,.T.); +#123685 = VERTEX_POINT('',#123686); +#123686 = CARTESIAN_POINT('',(104.901955,-138.191255,1.585)); +#123687 = LINE('',#123688,#123689); +#123688 = CARTESIAN_POINT('',(104.920629,-138.20994,1.585)); +#123689 = VECTOR('',#123690,1.); +#123690 = DIRECTION('',(-0.70689854972,0.70731495135,0.)); +#123691 = ORIENTED_EDGE('',*,*,#123692,.T.); +#123692 = EDGE_CURVE('',#123685,#123693,#123695,.T.); +#123693 = VERTEX_POINT('',#123694); +#123694 = CARTESIAN_POINT('',(104.67783,-138.172583,1.585)); +#123695 = LINE('',#123696,#123697); +#123696 = CARTESIAN_POINT('',(104.901955,-138.191255,1.585)); +#123697 = VECTOR('',#123698,1.); +#123698 = DIRECTION('',(-0.996547628543,8.302303321882E-02,0.)); +#123699 = ORIENTED_EDGE('',*,*,#123700,.T.); +#123700 = EDGE_CURVE('',#123693,#123701,#123703,.T.); +#123701 = VERTEX_POINT('',#123702); +#123702 = CARTESIAN_POINT('',(104.472379,-138.097875,1.585)); +#123703 = LINE('',#123704,#123705); +#123704 = CARTESIAN_POINT('',(104.67783,-138.172583,1.585)); +#123705 = VECTOR('',#123706,1.); +#123706 = DIRECTION('',(-0.939795560372,0.341737186601,0.)); +#123707 = ORIENTED_EDGE('',*,*,#123708,.T.); +#123708 = EDGE_CURVE('',#123701,#123709,#123711,.T.); +#123709 = VERTEX_POINT('',#123710); +#123710 = CARTESIAN_POINT('',(104.416352,-138.097875,1.585)); +#123711 = LINE('',#123712,#123713); +#123712 = CARTESIAN_POINT('',(104.472379,-138.097875,1.585)); +#123713 = VECTOR('',#123714,1.); +#123714 = DIRECTION('',(-1.,0.,0.)); +#123715 = ORIENTED_EDGE('',*,*,#123716,.T.); +#123716 = EDGE_CURVE('',#123709,#123717,#123719,.T.); +#123717 = VERTEX_POINT('',#123718); +#123718 = CARTESIAN_POINT('',(103.930742,-137.668304,1.585)); +#123719 = CIRCLE('',#123720,1.018544588725); +#123720 = AXIS2_PLACEMENT_3D('',#123721,#123722,#123723); +#123721 = CARTESIAN_POINT('',(104.81330961002,-137.1598676785,1.585)); +#123722 = DIRECTION('',(0.,0.,-1.)); +#123723 = DIRECTION('',(-0.389730223321,-0.920929070575,-0.)); +#123724 = ORIENTED_EDGE('',*,*,#123725,.T.); +#123725 = EDGE_CURVE('',#123717,#123726,#123728,.T.); +#123726 = VERTEX_POINT('',#123727); +#123727 = CARTESIAN_POINT('',(103.893393,-137.556238,1.585)); +#123728 = LINE('',#123729,#123730); +#123729 = CARTESIAN_POINT('',(103.930742,-137.668304,1.585)); +#123730 = VECTOR('',#123731,1.); +#123731 = DIRECTION('',(-0.316179512021,0.948699381352,0.)); +#123732 = ORIENTED_EDGE('',*,*,#123733,.T.); +#123733 = EDGE_CURVE('',#123726,#123734,#123736,.T.); +#123734 = VERTEX_POINT('',#123735); +#123735 = CARTESIAN_POINT('',(103.930742,-137.518882,1.585)); +#123736 = LINE('',#123737,#123738); +#123737 = CARTESIAN_POINT('',(103.893393,-137.556238,1.585)); +#123738 = VECTOR('',#123739,1.); +#123739 = DIRECTION('',(0.707040520838,0.707173035327,0.)); +#123740 = ORIENTED_EDGE('',*,*,#123741,.T.); +#123741 = EDGE_CURVE('',#123734,#123742,#123744,.T.); +#123742 = VERTEX_POINT('',#123743); +#123743 = CARTESIAN_POINT('',(104.0428,-137.481529,1.585)); +#123744 = LINE('',#123745,#123746); +#123745 = CARTESIAN_POINT('',(103.930742,-137.518882,1.585)); +#123746 = VECTOR('',#123747,1.); +#123747 = DIRECTION('',(0.948682451448,0.316230305814,0.)); +#123748 = ORIENTED_EDGE('',*,*,#123749,.T.); +#123749 = EDGE_CURVE('',#123742,#123750,#123752,.T.); +#123750 = VERTEX_POINT('',#123751); +#123751 = CARTESIAN_POINT('',(104.472379,-137.257401,1.585)); +#123752 = LINE('',#123753,#123754); +#123753 = CARTESIAN_POINT('',(104.0428,-137.481529,1.585)); +#123754 = VECTOR('',#123755,1.); +#123755 = DIRECTION('',(0.886584993364,0.462565724564,0.)); +#123756 = ORIENTED_EDGE('',*,*,#123757,.T.); +#123757 = EDGE_CURVE('',#123750,#123758,#123760,.T.); +#123758 = VERTEX_POINT('',#123759); +#123759 = CARTESIAN_POINT('',(104.528412,-137.257401,1.585)); +#123760 = LINE('',#123761,#123762); +#123761 = CARTESIAN_POINT('',(104.472379,-137.257401,1.585)); +#123762 = VECTOR('',#123763,1.); +#123763 = DIRECTION('',(1.,0.,0.)); +#123764 = ORIENTED_EDGE('',*,*,#123765,.T.); +#123765 = EDGE_CURVE('',#123758,#123766,#123768,.T.); +#123766 = VERTEX_POINT('',#123767); +#123767 = CARTESIAN_POINT('',(104.696506,-137.425499,1.585)); +#123768 = LINE('',#123769,#123770); +#123769 = CARTESIAN_POINT('',(104.528412,-137.257401,1.585)); +#123770 = VECTOR('',#123771,1.); +#123771 = DIRECTION('',(0.707098368006,-0.707115194267,0.)); +#123772 = ORIENTED_EDGE('',*,*,#123773,.T.); +#123773 = EDGE_CURVE('',#123766,#123774,#123776,.T.); +#123774 = VERTEX_POINT('',#123775); +#123775 = CARTESIAN_POINT('',(104.920629,-137.518882,1.585)); +#123776 = LINE('',#123777,#123778); +#123777 = CARTESIAN_POINT('',(104.696506,-137.425499,1.585)); +#123778 = VECTOR('',#123779,1.); +#123779 = DIRECTION('',(0.923079238265,-0.384609828116,0.)); +#123780 = ORIENTED_EDGE('',*,*,#123781,.T.); +#123781 = EDGE_CURVE('',#123774,#123782,#123784,.T.); +#123782 = VERTEX_POINT('',#123783); +#123783 = CARTESIAN_POINT('',(105.238146,-137.537562,1.585)); +#123784 = LINE('',#123785,#123786); +#123785 = CARTESIAN_POINT('',(104.920629,-137.518882,1.585)); +#123786 = VECTOR('',#123787,1.); +#123787 = DIRECTION('',(0.998273906964,-5.87299470016E-02,0.)); +#123788 = ORIENTED_EDGE('',*,*,#123789,.T.); +#123789 = EDGE_CURVE('',#123782,#123790,#123792,.T.); +#123790 = VERTEX_POINT('',#123791); +#123791 = CARTESIAN_POINT('',(105.387565,-137.500204,1.585)); +#123792 = LINE('',#123793,#123794); +#123793 = CARTESIAN_POINT('',(105.238146,-137.537562,1.585)); +#123794 = VECTOR('',#123795,1.); +#123795 = DIRECTION('',(0.970137534912,0.242555485107,0.)); +#123796 = ORIENTED_EDGE('',*,*,#123797,.T.); +#123797 = EDGE_CURVE('',#123790,#123798,#123800,.T.); +#123798 = VERTEX_POINT('',#123799); +#123799 = CARTESIAN_POINT('',(105.57433,-137.388146,1.585)); +#123800 = LINE('',#123801,#123802); +#123801 = CARTESIAN_POINT('',(105.387565,-137.500204,1.585)); +#123802 = VECTOR('',#123803,1.); +#123803 = DIRECTION('',(0.857494951281,0.514492379464,0.)); +#123804 = ORIENTED_EDGE('',*,*,#123805,.T.); +#123805 = EDGE_CURVE('',#123798,#123806,#123808,.T.); +#123806 = VERTEX_POINT('',#123807); +#123807 = CARTESIAN_POINT('',(105.667717,-137.27608,1.585)); +#123808 = LINE('',#123809,#123810); +#123809 = CARTESIAN_POINT('',(105.57433,-137.388146,1.585)); +#123810 = VECTOR('',#123811,1.); +#123811 = DIRECTION('',(0.640179005457,0.768225774739,0.)); +#123812 = ORIENTED_EDGE('',*,*,#123813,.T.); +#123813 = EDGE_CURVE('',#123806,#123814,#123816,.T.); +#123814 = VERTEX_POINT('',#123815); +#123815 = CARTESIAN_POINT('',(105.723753,-137.145344,1.585)); +#123816 = LINE('',#123817,#123818); +#123817 = CARTESIAN_POINT('',(105.667717,-137.27608,1.585)); +#123818 = VECTOR('',#123819,1.); +#123819 = DIRECTION('',(0.39395663221,0.919129028993,0.)); +#123820 = ORIENTED_EDGE('',*,*,#123821,.T.); +#123821 = EDGE_CURVE('',#123814,#123822,#123824,.T.); +#123822 = VERTEX_POINT('',#123823); +#123823 = CARTESIAN_POINT('',(105.723753,-136.846511,1.585)); +#123824 = LINE('',#123825,#123826); +#123825 = CARTESIAN_POINT('',(105.723753,-137.145344,1.585)); +#123826 = VECTOR('',#123827,1.); +#123827 = DIRECTION('',(0.,1.,0.)); +#123828 = ORIENTED_EDGE('',*,*,#123829,.T.); +#123829 = EDGE_CURVE('',#123822,#123830,#123832,.T.); +#123830 = VERTEX_POINT('',#123831); +#123831 = CARTESIAN_POINT('',(105.705072,-136.827839,1.585)); +#123832 = LINE('',#123833,#123834); +#123833 = CARTESIAN_POINT('',(105.723753,-136.846511,1.585)); +#123834 = VECTOR('',#123835,1.); +#123835 = DIRECTION('',(-0.707277134148,0.706936387174,0.)); +#123836 = ORIENTED_EDGE('',*,*,#123837,.T.); +#123837 = EDGE_CURVE('',#123830,#123838,#123840,.T.); +#123838 = VERTEX_POINT('',#123839); +#123839 = CARTESIAN_POINT('',(105.649047,-136.846511,1.585)); +#123840 = LINE('',#123841,#123842); +#123841 = CARTESIAN_POINT('',(105.705072,-136.827839,1.585)); +#123842 = VECTOR('',#123843,1.); +#123843 = DIRECTION('',(-0.948698537086,-0.316182045238,0.)); +#123844 = ORIENTED_EDGE('',*,*,#123845,.T.); +#123845 = EDGE_CURVE('',#123838,#123846,#123848,.T.); +#123846 = VERTEX_POINT('',#123847); +#123847 = CARTESIAN_POINT('',(105.555652,-136.921217,1.585)); +#123848 = LINE('',#123849,#123850); +#123849 = CARTESIAN_POINT('',(105.649047,-136.846511,1.585)); +#123850 = VECTOR('',#123851,1.); +#123851 = DIRECTION('',(-0.78090959492,-0.624644062296,0.)); +#123852 = ORIENTED_EDGE('',*,*,#123853,.T.); +#123853 = EDGE_CURVE('',#123846,#123854,#123856,.T.); +#123854 = VERTEX_POINT('',#123855); +#123855 = CARTESIAN_POINT('',(105.238146,-137.014602,1.585)); +#123856 = LINE('',#123857,#123858); +#123857 = CARTESIAN_POINT('',(105.555652,-136.921217,1.585)); +#123858 = VECTOR('',#123859,1.); +#123859 = DIRECTION('',(-0.959364779857,-0.282168777809,0.)); +#123860 = ORIENTED_EDGE('',*,*,#123861,.T.); +#123861 = EDGE_CURVE('',#123854,#123862,#123864,.T.); +#123862 = VERTEX_POINT('',#123863); +#123863 = CARTESIAN_POINT('',(104.771213,-137.014602,1.585)); +#123864 = LINE('',#123865,#123866); +#123865 = CARTESIAN_POINT('',(105.238146,-137.014602,1.585)); +#123866 = VECTOR('',#123867,1.); +#123867 = DIRECTION('',(-1.,0.,0.)); +#123868 = ORIENTED_EDGE('',*,*,#123869,.T.); +#123869 = EDGE_CURVE('',#123862,#123870,#123872,.T.); +#123870 = VERTEX_POINT('',#123871); +#123871 = CARTESIAN_POINT('',(104.528412,-136.958569,1.585)); +#123872 = LINE('',#123873,#123874); +#123873 = CARTESIAN_POINT('',(104.771213,-137.014602,1.585)); +#123874 = VECTOR('',#123875,1.); +#123875 = DIRECTION('',(-0.974389437107,0.22486712711,0.)); +#123876 = ORIENTED_EDGE('',*,*,#123877,.T.); +#123877 = EDGE_CURVE('',#123870,#123878,#123880,.T.); +#123878 = VERTEX_POINT('',#123879); +#123879 = CARTESIAN_POINT('',(104.266929,-136.809154,1.585)); +#123880 = LINE('',#123881,#123882); +#123881 = CARTESIAN_POINT('',(104.528412,-136.958569,1.585)); +#123882 = VECTOR('',#123883,1.); +#123883 = DIRECTION('',(-0.868248659173,0.496129283397,0.)); +#123884 = ORIENTED_EDGE('',*,*,#123885,.T.); +#123885 = EDGE_CURVE('',#123878,#123886,#123888,.T.); +#123886 = VERTEX_POINT('',#123887); +#123887 = CARTESIAN_POINT('',(104.061482,-136.603707,1.585)); +#123888 = LINE('',#123889,#123890); +#123889 = CARTESIAN_POINT('',(104.266929,-136.809154,1.585)); +#123890 = VECTOR('',#123891,1.); +#123891 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#123892 = ORIENTED_EDGE('',*,*,#123893,.T.); +#123893 = EDGE_CURVE('',#123886,#123894,#123896,.T.); +#123894 = VERTEX_POINT('',#123895); +#123895 = CARTESIAN_POINT('',(103.893393,-136.304868,1.585)); +#123896 = LINE('',#123897,#123898); +#123897 = CARTESIAN_POINT('',(104.061482,-136.603707,1.585)); +#123898 = VECTOR('',#123899,1.); +#123899 = DIRECTION('',(-0.490243653556,0.871585429059,0.)); +#123900 = ORIENTED_EDGE('',*,*,#123901,.T.); +#123901 = EDGE_CURVE('',#123894,#123902,#123904,.T.); +#123902 = VERTEX_POINT('',#123903); +#123903 = CARTESIAN_POINT('',(103.837355,-136.099416,1.585)); +#123904 = LINE('',#123905,#123906); +#123905 = CARTESIAN_POINT('',(103.893393,-136.304868,1.585)); +#123906 = VECTOR('',#123907,1.); +#123907 = DIRECTION('',(-0.263142040483,0.964757102348,0.)); +#123908 = ORIENTED_EDGE('',*,*,#123909,.T.); +#123909 = EDGE_CURVE('',#123902,#123910,#123912,.T.); +#123910 = VERTEX_POINT('',#123911); +#123911 = CARTESIAN_POINT('',(103.837355,-135.968676,1.585)); +#123912 = LINE('',#123913,#123914); +#123913 = CARTESIAN_POINT('',(103.837355,-136.099416,1.585)); +#123914 = VECTOR('',#123915,1.); +#123915 = DIRECTION('',(0.,1.,0.)); +#123916 = ORIENTED_EDGE('',*,*,#123917,.T.); +#123917 = EDGE_CURVE('',#123910,#123918,#123920,.T.); +#123918 = VERTEX_POINT('',#123919); +#123919 = CARTESIAN_POINT('',(103.8,-135.95,1.585)); +#123920 = LINE('',#123921,#123922); +#123921 = CARTESIAN_POINT('',(103.837355,-135.968676,1.585)); +#123922 = VECTOR('',#123923,1.); +#123923 = DIRECTION('',(-0.894441557154,0.447184862037,0.)); +#123924 = ORIENTED_EDGE('',*,*,#123925,.T.); +#123925 = EDGE_CURVE('',#123918,#123926,#123928,.T.); +#123926 = VERTEX_POINT('',#123927); +#123927 = CARTESIAN_POINT('',(103.8,-135.688523,1.585)); +#123928 = LINE('',#123929,#123930); +#123929 = CARTESIAN_POINT('',(103.8,-135.95,1.585)); +#123930 = VECTOR('',#123931,1.); +#123931 = DIRECTION('',(0.,1.,0.)); +#123932 = ORIENTED_EDGE('',*,*,#123933,.T.); +#123933 = EDGE_CURVE('',#123926,#123934,#123936,.T.); +#123934 = VERTEX_POINT('',#123935); +#123935 = CARTESIAN_POINT('',(103.837355,-135.651172,1.585)); +#123936 = LINE('',#123937,#123938); +#123937 = CARTESIAN_POINT('',(103.8,-135.688523,1.585)); +#123938 = VECTOR('',#123939,1.); +#123939 = DIRECTION('',(0.707144640949,0.707068919397,0.)); +#123940 = ORIENTED_EDGE('',*,*,#123941,.T.); +#123941 = EDGE_CURVE('',#123934,#123942,#123944,.T.); +#123942 = VERTEX_POINT('',#123943); +#123943 = CARTESIAN_POINT('',(103.856041,-135.445712,1.585)); +#123944 = LINE('',#123945,#123946); +#123945 = CARTESIAN_POINT('',(103.837355,-135.651172,1.585)); +#123946 = VECTOR('',#123947,1.); +#123947 = DIRECTION('',(9.057333104268E-02,0.995889788934,0.)); +#123948 = ORIENTED_EDGE('',*,*,#123949,.T.); +#123949 = EDGE_CURVE('',#123942,#123522,#123950,.T.); +#123950 = LINE('',#123951,#123952); +#123951 = CARTESIAN_POINT('',(103.856041,-135.445712,1.585)); +#123952 = VECTOR('',#123953,1.); +#123953 = DIRECTION('',(0.341729472725,0.939798365327,0.)); +#123954 = FACE_BOUND('',#123955,.F.); +#123955 = EDGE_LOOP('',(#123956,#123966,#123974,#123982,#123990,#123998, + #124006,#124015,#124023,#124031,#124039,#124047,#124055,#124063)); +#123956 = ORIENTED_EDGE('',*,*,#123957,.T.); +#123957 = EDGE_CURVE('',#123958,#123960,#123962,.T.); +#123958 = VERTEX_POINT('',#123959); +#123959 = CARTESIAN_POINT('',(105.518299,-135.333658,1.585)); +#123960 = VERTEX_POINT('',#123961); +#123961 = CARTESIAN_POINT('',(105.350204,-135.258954,1.585)); +#123962 = LINE('',#123963,#123964); +#123963 = CARTESIAN_POINT('',(105.518299,-135.333658,1.585)); +#123964 = VECTOR('',#123965,1.); +#123965 = DIRECTION('',(-0.913821412224,0.40611627222,0.)); +#123966 = ORIENTED_EDGE('',*,*,#123967,.T.); +#123967 = EDGE_CURVE('',#123960,#123968,#123970,.T.); +#123968 = VERTEX_POINT('',#123969); +#123969 = CARTESIAN_POINT('',(105.070047,-135.258954,1.585)); +#123970 = LINE('',#123971,#123972); +#123971 = CARTESIAN_POINT('',(105.350204,-135.258954,1.585)); +#123972 = VECTOR('',#123973,1.); +#123973 = DIRECTION('',(-1.,0.,0.)); +#123974 = ORIENTED_EDGE('',*,*,#123975,.T.); +#123975 = EDGE_CURVE('',#123968,#123976,#123978,.T.); +#123976 = VERTEX_POINT('',#123977); +#123977 = CARTESIAN_POINT('',(104.883279,-135.333658,1.585)); +#123978 = LINE('',#123979,#123980); +#123979 = CARTESIAN_POINT('',(105.070047,-135.258954,1.585)); +#123980 = VECTOR('',#123981,1.); +#123981 = DIRECTION('',(-0.928482176371,-0.371376962347,0.)); +#123982 = ORIENTED_EDGE('',*,*,#123983,.T.); +#123983 = EDGE_CURVE('',#123976,#123984,#123986,.T.); +#123984 = VERTEX_POINT('',#123985); +#123985 = CARTESIAN_POINT('',(104.696506,-135.539108,1.585)); +#123986 = LINE('',#123987,#123988); +#123987 = CARTESIAN_POINT('',(104.883279,-135.333658,1.585)); +#123988 = VECTOR('',#123989,1.); +#123989 = DIRECTION('',(-0.672673331785,-0.739939584497,0.)); +#123990 = ORIENTED_EDGE('',*,*,#123991,.T.); +#123991 = EDGE_CURVE('',#123984,#123992,#123994,.T.); +#123992 = VERTEX_POINT('',#123993); +#123993 = CARTESIAN_POINT('',(104.640477,-135.78191,1.585)); +#123994 = LINE('',#123995,#123996); +#123995 = CARTESIAN_POINT('',(104.696506,-135.539108,1.585)); +#123996 = VECTOR('',#123997,1.); +#123997 = DIRECTION('',(-0.224851006996,-0.974393157126,0.)); +#123998 = ORIENTED_EDGE('',*,*,#123999,.T.); +#123999 = EDGE_CURVE('',#123992,#124000,#124002,.T.); +#124000 = VERTEX_POINT('',#124001); +#124001 = CARTESIAN_POINT('',(104.67783,-136.024711,1.585)); +#124002 = LINE('',#124003,#124004); +#124003 = CARTESIAN_POINT('',(104.640477,-135.78191,1.585)); +#124004 = VECTOR('',#124005,1.); +#124005 = DIRECTION('',(0.152053207664,-0.988372309426,0.)); +#124006 = ORIENTED_EDGE('',*,*,#124007,.T.); +#124007 = EDGE_CURVE('',#124000,#124008,#124010,.T.); +#124008 = VERTEX_POINT('',#124009); +#124009 = CARTESIAN_POINT('',(105.1074,-136.360902,1.585)); +#124010 = CIRCLE('',#124011,0.508067595501); +#124011 = AXIS2_PLACEMENT_3D('',#124012,#124013,#124014); +#124012 = CARTESIAN_POINT('',(105.15680063026,-135.8552417787,1.585)); +#124013 = DIRECTION('',(0.,0.,1.)); +#124014 = DIRECTION('',(-0.942730129821,-0.333556445489,0.)); +#124015 = ORIENTED_EDGE('',*,*,#124016,.T.); +#124016 = EDGE_CURVE('',#124008,#124017,#124019,.T.); +#124017 = VERTEX_POINT('',#124018); +#124018 = CARTESIAN_POINT('',(105.387565,-136.342221,1.585)); +#124019 = LINE('',#124020,#124021); +#124020 = CARTESIAN_POINT('',(105.1074,-136.360902,1.585)); +#124021 = VECTOR('',#124022,1.); +#124022 = DIRECTION('',(0.997784369863,6.65308293806E-02,0.)); +#124023 = ORIENTED_EDGE('',*,*,#124024,.T.); +#124024 = EDGE_CURVE('',#124017,#124025,#124027,.T.); +#124025 = VERTEX_POINT('',#124026); +#124026 = CARTESIAN_POINT('',(105.555652,-136.248834,1.585)); +#124027 = LINE('',#124028,#124029); +#124028 = CARTESIAN_POINT('',(105.387565,-136.342221,1.585)); +#124029 = VECTOR('',#124030,1.); +#124030 = DIRECTION('',(0.874145501026,0.485664125746,0.)); +#124031 = ORIENTED_EDGE('',*,*,#124032,.T.); +#124032 = EDGE_CURVE('',#124025,#124033,#124035,.T.); +#124033 = VERTEX_POINT('',#124034); +#124034 = CARTESIAN_POINT('',(105.705072,-136.062061,1.585)); +#124035 = LINE('',#124036,#124037); +#124036 = CARTESIAN_POINT('',(105.555652,-136.248834,1.585)); +#124037 = VECTOR('',#124038,1.); +#124038 = DIRECTION('',(0.624699126401,0.780865546348,0.)); +#124039 = ORIENTED_EDGE('',*,*,#124040,.T.); +#124040 = EDGE_CURVE('',#124033,#124041,#124043,.T.); +#124041 = VERTEX_POINT('',#124042); +#124042 = CARTESIAN_POINT('',(105.742426,-135.95,1.585)); +#124043 = LINE('',#124044,#124045); +#124044 = CARTESIAN_POINT('',(105.705072,-136.062061,1.585)); +#124045 = VECTOR('',#124046,1.); +#124046 = DIRECTION('',(0.316230305746,0.94868245147,0.)); +#124047 = ORIENTED_EDGE('',*,*,#124048,.T.); +#124048 = EDGE_CURVE('',#124041,#124049,#124051,.T.); +#124049 = VERTEX_POINT('',#124050); +#124050 = CARTESIAN_POINT('',(105.723753,-135.595142,1.585)); +#124051 = LINE('',#124052,#124053); +#124052 = CARTESIAN_POINT('',(105.742426,-135.95,1.585)); +#124053 = VECTOR('',#124054,1.); +#124054 = DIRECTION('',(-5.254834619069E-02,0.998618381221,0.)); +#124055 = ORIENTED_EDGE('',*,*,#124056,.T.); +#124056 = EDGE_CURVE('',#124049,#124057,#124059,.T.); +#124057 = VERTEX_POINT('',#124058); +#124058 = CARTESIAN_POINT('',(105.649047,-135.464395,1.585)); +#124059 = LINE('',#124060,#124061); +#124060 = CARTESIAN_POINT('',(105.723753,-135.595142,1.585)); +#124061 = VECTOR('',#124062,1.); +#124062 = DIRECTION('',(-0.496106040603,0.868261940014,0.)); +#124063 = ORIENTED_EDGE('',*,*,#124064,.T.); +#124064 = EDGE_CURVE('',#124057,#123958,#124065,.T.); +#124065 = LINE('',#124066,#124067); +#124066 = CARTESIAN_POINT('',(105.649047,-135.464395,1.585)); +#124067 = VECTOR('',#124068,1.); +#124068 = DIRECTION('',(-0.707136526721,0.707077034401,0.)); +#124069 = PLANE('',#124070); +#124070 = AXIS2_PLACEMENT_3D('',#124071,#124072,#124073); +#124071 = CARTESIAN_POINT('',(0.,0.,1.585)); +#124072 = DIRECTION('',(0.,0.,1.)); +#124073 = DIRECTION('',(1.,0.,-0.)); +#124074 = SHELL_BASED_SURFACE_MODEL('',(#124075)); +#124075 = OPEN_SHELL('',(#124076)); +#124076 = ADVANCED_FACE('',(#124077,#124247),#124369,.T.); +#124077 = FACE_BOUND('',#124078,.F.); +#124078 = EDGE_LOOP('',(#124079,#124089,#124097,#124105,#124113,#124121, + #124129,#124137,#124145,#124153,#124161,#124169,#124177,#124185, + #124193,#124201,#124209,#124217,#124225,#124233,#124241)); +#124079 = ORIENTED_EDGE('',*,*,#124080,.T.); +#124080 = EDGE_CURVE('',#124081,#124083,#124085,.T.); +#124081 = VERTEX_POINT('',#124082); +#124082 = CARTESIAN_POINT('',(90.968801,-134.455836,1.585)); +#124083 = VERTEX_POINT('',#124084); +#124084 = CARTESIAN_POINT('',(90.987476,-134.26906,1.585)); +#124085 = LINE('',#124086,#124087); +#124086 = CARTESIAN_POINT('',(90.968801,-134.455836,1.585)); +#124087 = VECTOR('',#124088,1.); +#124088 = DIRECTION('',(9.949000480092E-02,0.995038561537,0.)); +#124089 = ORIENTED_EDGE('',*,*,#124090,.T.); +#124090 = EDGE_CURVE('',#124083,#124091,#124093,.T.); +#124091 = VERTEX_POINT('',#124092); +#124092 = CARTESIAN_POINT('',(91.024835,-134.26906,1.585)); +#124093 = LINE('',#124094,#124095); +#124094 = CARTESIAN_POINT('',(90.987476,-134.26906,1.585)); +#124095 = VECTOR('',#124096,1.); +#124096 = DIRECTION('',(1.,0.,0.)); +#124097 = ORIENTED_EDGE('',*,*,#124098,.T.); +#124098 = EDGE_CURVE('',#124091,#124099,#124101,.T.); +#124099 = VERTEX_POINT('',#124100); +#124100 = CARTESIAN_POINT('',(91.454403,-134.642604,1.585)); +#124101 = LINE('',#124102,#124103); +#124102 = CARTESIAN_POINT('',(91.024835,-134.26906,1.585)); +#124103 = VECTOR('',#124104,1.); +#124104 = DIRECTION('',(0.754599773792,-0.656185325493,0.)); +#124105 = ORIENTED_EDGE('',*,*,#124106,.T.); +#124106 = EDGE_CURVE('',#124099,#124107,#124109,.T.); +#124107 = VERTEX_POINT('',#124108); +#124108 = CARTESIAN_POINT('',(91.809274,-134.866728,1.585)); +#124109 = LINE('',#124110,#124111); +#124110 = CARTESIAN_POINT('',(91.454403,-134.642604,1.585)); +#124111 = VECTOR('',#124112,1.); +#124112 = DIRECTION('',(0.845494338009,-0.533984385909,0.)); +#124113 = ORIENTED_EDGE('',*,*,#124114,.T.); +#124114 = EDGE_CURVE('',#124107,#124115,#124117,.T.); +#124115 = VERTEX_POINT('',#124116); +#124116 = CARTESIAN_POINT('',(92.089422,-135.090853,1.585)); +#124117 = LINE('',#124118,#124119); +#124118 = CARTESIAN_POINT('',(91.809274,-134.866728,1.585)); +#124119 = VECTOR('',#124120,1.); +#124120 = DIRECTION('',(0.780859835578,-0.624706264721,0.)); +#124121 = ORIENTED_EDGE('',*,*,#124122,.T.); +#124122 = EDGE_CURVE('',#124115,#124123,#124125,.T.); +#124123 = VERTEX_POINT('',#124124); +#124124 = CARTESIAN_POINT('',(92.126785,-135.090853,1.585)); +#124125 = LINE('',#124126,#124127); +#124126 = CARTESIAN_POINT('',(92.089422,-135.090853,1.585)); +#124127 = VECTOR('',#124128,1.); +#124128 = DIRECTION('',(1.,0.,0.)); +#124129 = ORIENTED_EDGE('',*,*,#124130,.T.); +#124130 = EDGE_CURVE('',#124123,#124131,#124133,.T.); +#124131 = VERTEX_POINT('',#124132); +#124132 = CARTESIAN_POINT('',(92.294879,-135.277626,1.585)); +#124133 = LINE('',#124134,#124135); +#124134 = CARTESIAN_POINT('',(92.126785,-135.090853,1.585)); +#124135 = VECTOR('',#124136,1.); +#124136 = DIRECTION('',(0.668960993789,-0.74329751028,0.)); +#124137 = ORIENTED_EDGE('',*,*,#124138,.T.); +#124138 = EDGE_CURVE('',#124131,#124139,#124141,.T.); +#124139 = VERTEX_POINT('',#124140); +#124140 = CARTESIAN_POINT('',(92.369582,-135.445712,1.585)); +#124141 = LINE('',#124142,#124143); +#124142 = CARTESIAN_POINT('',(92.294879,-135.277626,1.585)); +#124143 = VECTOR('',#124144,1.); +#124144 = DIRECTION('',(0.406129890789,-0.913815359801,0.)); +#124145 = ORIENTED_EDGE('',*,*,#124146,.T.); +#124146 = EDGE_CURVE('',#124139,#124147,#124149,.T.); +#124147 = VERTEX_POINT('',#124148); +#124148 = CARTESIAN_POINT('',(92.369582,-135.707206,1.585)); +#124149 = LINE('',#124150,#124151); +#124150 = CARTESIAN_POINT('',(92.369582,-135.445712,1.585)); +#124151 = VECTOR('',#124152,1.); +#124152 = DIRECTION('',(0.,-1.,0.)); +#124153 = ORIENTED_EDGE('',*,*,#124154,.T.); +#124154 = EDGE_CURVE('',#124147,#124155,#124157,.T.); +#124155 = VERTEX_POINT('',#124156); +#124156 = CARTESIAN_POINT('',(92.276201,-135.893978,1.585)); +#124157 = LINE('',#124158,#124159); +#124158 = CARTESIAN_POINT('',(92.369582,-135.707206,1.585)); +#124159 = VECTOR('',#124160,1.); +#124160 = DIRECTION('',(-0.447194439704,-0.894436768641,0.)); +#124161 = ORIENTED_EDGE('',*,*,#124162,.T.); +#124162 = EDGE_CURVE('',#124155,#124163,#124165,.T.); +#124163 = VERTEX_POINT('',#124164); +#124164 = CARTESIAN_POINT('',(92.145455,-136.024711,1.585)); +#124165 = LINE('',#124166,#124167); +#124166 = CARTESIAN_POINT('',(92.276201,-135.893978,1.585)); +#124167 = VECTOR('',#124168,1.); +#124168 = DIRECTION('',(-0.707141935672,-0.707071624954,0.)); +#124169 = ORIENTED_EDGE('',*,*,#124170,.T.); +#124170 = EDGE_CURVE('',#124163,#124171,#124173,.T.); +#124171 = VERTEX_POINT('',#124172); +#124172 = CARTESIAN_POINT('',(91.865301,-136.136776,1.585)); +#124173 = LINE('',#124174,#124175); +#124174 = CARTESIAN_POINT('',(92.145455,-136.024711,1.585)); +#124175 = VECTOR('',#124176,1.); +#124176 = DIRECTION('',(-0.928472805277,-0.371400390226,0.)); +#124177 = ORIENTED_EDGE('',*,*,#124178,.T.); +#124178 = EDGE_CURVE('',#124171,#124179,#124181,.T.); +#124179 = VERTEX_POINT('',#124180); +#124180 = CARTESIAN_POINT('',(91.585148,-136.118096,1.585)); +#124181 = LINE('',#124182,#124183); +#124182 = CARTESIAN_POINT('',(91.865301,-136.136776,1.585)); +#124183 = VECTOR('',#124184,1.); +#124184 = DIRECTION('',(-0.997784417114,6.653012072577E-02,0.)); +#124185 = ORIENTED_EDGE('',*,*,#124186,.T.); +#124186 = EDGE_CURVE('',#124179,#124187,#124189,.T.); +#124187 = VERTEX_POINT('',#124188); +#124188 = CARTESIAN_POINT('',(91.323667,-135.968676,1.585)); +#124189 = LINE('',#124190,#124191); +#124190 = CARTESIAN_POINT('',(91.585148,-136.118096,1.585)); +#124191 = VECTOR('',#124192,1.); +#124192 = DIRECTION('',(-0.86823987272,0.496144659772,0.)); +#124193 = ORIENTED_EDGE('',*,*,#124194,.T.); +#124194 = EDGE_CURVE('',#124187,#124195,#124197,.T.); +#124195 = VERTEX_POINT('',#124196); +#124196 = CARTESIAN_POINT('',(91.136895,-135.744559,1.585)); +#124197 = LINE('',#124198,#124199); +#124198 = CARTESIAN_POINT('',(91.323667,-135.968676,1.585)); +#124199 = VECTOR('',#124200,1.); +#124200 = DIRECTION('',(-0.640200245663,0.768208074322,0.)); +#124201 = ORIENTED_EDGE('',*,*,#124202,.T.); +#124202 = EDGE_CURVE('',#124195,#124203,#124205,.T.); +#124203 = VERTEX_POINT('',#124204); +#124204 = CARTESIAN_POINT('',(91.024835,-135.52043,1.585)); +#124205 = LINE('',#124206,#124207); +#124206 = CARTESIAN_POINT('',(91.136895,-135.744559,1.585)); +#124207 = VECTOR('',#124208,1.); +#124208 = DIRECTION('',(-0.447199228878,0.894434374167,0.)); +#124209 = ORIENTED_EDGE('',*,*,#124210,.T.); +#124210 = EDGE_CURVE('',#124203,#124211,#124213,.T.); +#124211 = VERTEX_POINT('',#124212); +#124212 = CARTESIAN_POINT('',(90.950119,-135.221594,1.585)); +#124213 = LINE('',#124214,#124215); +#124214 = CARTESIAN_POINT('',(91.024835,-135.52043,1.585)); +#124215 = VECTOR('',#124216,1.); +#124216 = DIRECTION('',(-0.242557012935,0.97013715292,0.)); +#124217 = ORIENTED_EDGE('',*,*,#124218,.T.); +#124218 = EDGE_CURVE('',#124211,#124219,#124221,.T.); +#124219 = VERTEX_POINT('',#124220); +#124220 = CARTESIAN_POINT('',(90.931446,-134.773337,1.585)); +#124221 = LINE('',#124222,#124223); +#124222 = CARTESIAN_POINT('',(90.950119,-135.221594,1.585)); +#124223 = VECTOR('',#124224,1.); +#124224 = DIRECTION('',(-4.16208100419E-02,0.999133478656,0.)); +#124225 = ORIENTED_EDGE('',*,*,#124226,.T.); +#124226 = EDGE_CURVE('',#124219,#124227,#124229,.T.); +#124227 = VERTEX_POINT('',#124228); +#124228 = CARTESIAN_POINT('',(90.950119,-134.754664,1.585)); +#124229 = LINE('',#124230,#124231); +#124230 = CARTESIAN_POINT('',(90.931446,-134.773337,1.585)); +#124231 = VECTOR('',#124232,1.); +#124232 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#124233 = ORIENTED_EDGE('',*,*,#124234,.T.); +#124234 = EDGE_CURVE('',#124227,#124235,#124237,.T.); +#124235 = VERTEX_POINT('',#124236); +#124236 = CARTESIAN_POINT('',(90.950119,-134.474509,1.585)); +#124237 = LINE('',#124238,#124239); +#124238 = CARTESIAN_POINT('',(90.950119,-134.754664,1.585)); +#124239 = VECTOR('',#124240,1.); +#124240 = DIRECTION('',(0.,1.,0.)); +#124241 = ORIENTED_EDGE('',*,*,#124242,.T.); +#124242 = EDGE_CURVE('',#124235,#124081,#124243,.T.); +#124243 = LINE('',#124244,#124245); +#124244 = CARTESIAN_POINT('',(90.950119,-134.474509,1.585)); +#124245 = VECTOR('',#124246,1.); +#124246 = DIRECTION('',(0.707277125028,0.706936396299,0.)); +#124247 = FACE_BOUND('',#124248,.F.); +#124248 = EDGE_LOOP('',(#124249,#124259,#124267,#124275,#124283,#124291, + #124299,#124307,#124315,#124323,#124331,#124339,#124347,#124355, + #124363)); +#124249 = ORIENTED_EDGE('',*,*,#124250,.T.); +#124250 = EDGE_CURVE('',#124251,#124253,#124255,.T.); +#124251 = VERTEX_POINT('',#124252); +#124252 = CARTESIAN_POINT('',(91.977363,-135.445712,1.585)); +#124253 = VERTEX_POINT('',#124254); +#124254 = CARTESIAN_POINT('',(91.771917,-135.258954,1.585)); +#124255 = LINE('',#124256,#124257); +#124256 = CARTESIAN_POINT('',(91.977363,-135.445712,1.585)); +#124257 = VECTOR('',#124258,1.); +#124258 = DIRECTION('',(-0.739959955897,0.672650922595,0.)); +#124259 = ORIENTED_EDGE('',*,*,#124260,.T.); +#124260 = EDGE_CURVE('',#124253,#124261,#124263,.T.); +#124261 = VERTEX_POINT('',#124262); +#124262 = CARTESIAN_POINT('',(91.286315,-134.941441,1.585)); +#124263 = LINE('',#124264,#124265); +#124264 = CARTESIAN_POINT('',(91.771917,-135.258954,1.585)); +#124265 = VECTOR('',#124266,1.); +#124266 = DIRECTION('',(-0.836966456175,0.547254192527,0.)); +#124267 = ORIENTED_EDGE('',*,*,#124268,.T.); +#124268 = EDGE_CURVE('',#124261,#124269,#124271,.T.); +#124269 = VERTEX_POINT('',#124270); +#124270 = CARTESIAN_POINT('',(91.267628,-134.960124,1.585)); +#124271 = LINE('',#124272,#124273); +#124272 = CARTESIAN_POINT('',(91.286315,-134.941441,1.585)); +#124273 = VECTOR('',#124274,1.); +#124274 = DIRECTION('',(-0.707182464241,-0.707031090031,0.)); +#124275 = ORIENTED_EDGE('',*,*,#124276,.T.); +#124276 = EDGE_CURVE('',#124269,#124277,#124279,.T.); +#124277 = VERTEX_POINT('',#124278); +#124278 = CARTESIAN_POINT('',(91.267628,-135.090853,1.585)); +#124279 = LINE('',#124280,#124281); +#124280 = CARTESIAN_POINT('',(91.267628,-134.960124,1.585)); +#124281 = VECTOR('',#124282,1.); +#124282 = DIRECTION('',(0.,-1.,0.)); +#124283 = ORIENTED_EDGE('',*,*,#124284,.T.); +#124284 = EDGE_CURVE('',#124277,#124285,#124287,.T.); +#124285 = VERTEX_POINT('',#124286); +#124286 = CARTESIAN_POINT('',(91.286315,-135.109529,1.585)); +#124287 = LINE('',#124288,#124289); +#124288 = CARTESIAN_POINT('',(91.267628,-135.090853,1.585)); +#124289 = VECTOR('',#124290,1.); +#124290 = DIRECTION('',(0.707314929067,-0.706898572016,0.)); +#124291 = ORIENTED_EDGE('',*,*,#124292,.T.); +#124292 = EDGE_CURVE('',#124285,#124293,#124295,.T.); +#124293 = VERTEX_POINT('',#124294); +#124294 = CARTESIAN_POINT('',(91.286315,-135.202919,1.585)); +#124295 = LINE('',#124296,#124297); +#124296 = CARTESIAN_POINT('',(91.286315,-135.109529,1.585)); +#124297 = VECTOR('',#124298,1.); +#124298 = DIRECTION('',(0.,-1.,0.)); +#124299 = ORIENTED_EDGE('',*,*,#124300,.T.); +#124300 = EDGE_CURVE('',#124293,#124301,#124303,.T.); +#124301 = VERTEX_POINT('',#124302); +#124302 = CARTESIAN_POINT('',(91.34235,-135.389689,1.585)); +#124303 = LINE('',#124304,#124305); +#124304 = CARTESIAN_POINT('',(91.286315,-135.202919,1.585)); +#124305 = VECTOR('',#124306,1.); +#124306 = DIRECTION('',(0.287366705119,-0.957820639154,0.)); +#124307 = ORIENTED_EDGE('',*,*,#124308,.T.); +#124308 = EDGE_CURVE('',#124301,#124309,#124311,.T.); +#124309 = VERTEX_POINT('',#124310); +#124310 = CARTESIAN_POINT('',(91.435725,-135.557784,1.585)); +#124311 = LINE('',#124312,#124313); +#124312 = CARTESIAN_POINT('',(91.34235,-135.389689,1.585)); +#124313 = VECTOR('',#124314,1.); +#124314 = DIRECTION('',(0.485598775181,-0.874181805772,0.)); +#124315 = ORIENTED_EDGE('',*,*,#124316,.T.); +#124316 = EDGE_CURVE('',#124309,#124317,#124319,.T.); +#124317 = VERTEX_POINT('',#124318); +#124318 = CARTESIAN_POINT('',(91.622501,-135.744559,1.585)); +#124319 = LINE('',#124320,#124321); +#124320 = CARTESIAN_POINT('',(91.435725,-135.557784,1.585)); +#124321 = VECTOR('',#124322,1.); +#124322 = DIRECTION('',(0.707108674116,-0.707104888252,0.)); +#124323 = ORIENTED_EDGE('',*,*,#124324,.T.); +#124324 = EDGE_CURVE('',#124317,#124325,#124327,.T.); +#124325 = VERTEX_POINT('',#124326); +#124326 = CARTESIAN_POINT('',(91.69721,-135.78191,1.585)); +#124327 = LINE('',#124328,#124329); +#124328 = CARTESIAN_POINT('',(91.622501,-135.744559,1.585)); +#124329 = VECTOR('',#124330,1.); +#124330 = DIRECTION('',(0.894443951693,-0.447180072544,0.)); +#124331 = ORIENTED_EDGE('',*,*,#124332,.T.); +#124332 = EDGE_CURVE('',#124325,#124333,#124335,.T.); +#124333 = VERTEX_POINT('',#124334); +#124334 = CARTESIAN_POINT('',(91.827944,-135.800585,1.585)); +#124335 = LINE('',#124336,#124337); +#124336 = CARTESIAN_POINT('',(91.69721,-135.78191,1.585)); +#124337 = VECTOR('',#124338,1.); +#124338 = DIRECTION('',(0.989950856621,-0.141411815193,0.)); +#124339 = ORIENTED_EDGE('',*,*,#124340,.T.); +#124340 = EDGE_CURVE('',#124333,#124341,#124343,.T.); +#124341 = VERTEX_POINT('',#124342); +#124342 = CARTESIAN_POINT('',(91.883976,-135.78191,1.585)); +#124343 = LINE('',#124344,#124345); +#124344 = CARTESIAN_POINT('',(91.827944,-135.800585,1.585)); +#124345 = VECTOR('',#124346,1.); +#124346 = DIRECTION('',(0.948695149301,0.316192210044,0.)); +#124347 = ORIENTED_EDGE('',*,*,#124348,.T.); +#124348 = EDGE_CURVE('',#124341,#124349,#124351,.T.); +#124349 = VERTEX_POINT('',#124350); +#124350 = CARTESIAN_POINT('',(91.996049,-135.66985,1.585)); +#124351 = LINE('',#124352,#124353); +#124352 = CARTESIAN_POINT('',(91.883976,-135.78191,1.585)); +#124353 = VECTOR('',#124354,1.); +#124354 = DIRECTION('',(0.707147793093,0.707065766902,0.)); +#124355 = ORIENTED_EDGE('',*,*,#124356,.T.); +#124356 = EDGE_CURVE('',#124349,#124357,#124359,.T.); +#124357 = VERTEX_POINT('',#124358); +#124358 = CARTESIAN_POINT('',(91.996049,-135.483078,1.585)); +#124359 = LINE('',#124360,#124361); +#124360 = CARTESIAN_POINT('',(91.996049,-135.66985,1.585)); +#124361 = VECTOR('',#124362,1.); +#124362 = DIRECTION('',(0.,1.,0.)); +#124363 = ORIENTED_EDGE('',*,*,#124364,.T.); +#124364 = EDGE_CURVE('',#124357,#124251,#124365,.T.); +#124365 = LINE('',#124366,#124367); +#124366 = CARTESIAN_POINT('',(91.996049,-135.483078,1.585)); +#124367 = VECTOR('',#124368,1.); +#124368 = DIRECTION('',(-0.447271041356,0.894398465766,0.)); +#124369 = PLANE('',#124370); +#124370 = AXIS2_PLACEMENT_3D('',#124371,#124372,#124373); +#124371 = CARTESIAN_POINT('',(0.,0.,1.585)); +#124372 = DIRECTION('',(0.,0.,1.)); +#124373 = DIRECTION('',(1.,0.,-0.)); +#124374 = SHELL_BASED_SURFACE_MODEL('',(#124375)); +#124375 = OPEN_SHELL('',(#124376)); +#124376 = ADVANCED_FACE('',(#124377,#124540),#124630,.T.); +#124377 = FACE_BOUND('',#124378,.F.); +#124378 = EDGE_LOOP('',(#124379,#124389,#124397,#124405,#124413,#124421, + #124429,#124437,#124445,#124453,#124461,#124469,#124477,#124486, + #124494,#124502,#124510,#124518,#124526,#124534)); +#124379 = ORIENTED_EDGE('',*,*,#124380,.T.); +#124380 = EDGE_CURVE('',#124381,#124383,#124385,.T.); +#124381 = VERTEX_POINT('',#124382); +#124382 = CARTESIAN_POINT('',(94.031852,-134.810694,1.585)); +#124383 = VERTEX_POINT('',#124384); +#124384 = CARTESIAN_POINT('',(94.06921,-134.810694,1.585)); +#124385 = LINE('',#124386,#124387); +#124386 = CARTESIAN_POINT('',(94.031852,-134.810694,1.585)); +#124387 = VECTOR('',#124388,1.); +#124388 = DIRECTION('',(1.,0.,0.)); +#124389 = ORIENTED_EDGE('',*,*,#124390,.T.); +#124390 = EDGE_CURVE('',#124383,#124391,#124393,.T.); +#124391 = VERTEX_POINT('',#124392); +#124392 = CARTESIAN_POINT('',(94.741583,-134.28774,1.585)); +#124393 = LINE('',#124394,#124395); +#124394 = CARTESIAN_POINT('',(94.06921,-134.810694,1.585)); +#124395 = VECTOR('',#124396,1.); +#124396 = DIRECTION('',(0.789353797734,0.613938581621,0.)); +#124397 = ORIENTED_EDGE('',*,*,#124398,.T.); +#124398 = EDGE_CURVE('',#124391,#124399,#124401,.T.); +#124399 = VERTEX_POINT('',#124400); +#124400 = CARTESIAN_POINT('',(94.778942,-134.343775,1.585)); +#124401 = LINE('',#124402,#124403); +#124402 = CARTESIAN_POINT('',(94.741583,-134.28774,1.585)); +#124403 = VECTOR('',#124404,1.); +#124404 = DIRECTION('',(0.554724181993,-0.832034303327,0.)); +#124405 = ORIENTED_EDGE('',*,*,#124406,.T.); +#124406 = EDGE_CURVE('',#124399,#124407,#124409,.T.); +#124407 = VERTEX_POINT('',#124408); +#124408 = CARTESIAN_POINT('',(94.797618,-134.605251,1.585)); +#124409 = LINE('',#124410,#124411); +#124410 = CARTESIAN_POINT('',(94.778942,-134.343775,1.585)); +#124411 = VECTOR('',#124412,1.); +#124412 = DIRECTION('',(7.124379682136E-02,-0.997458932194,0.)); +#124413 = ORIENTED_EDGE('',*,*,#124414,.T.); +#124414 = EDGE_CURVE('',#124407,#124415,#124417,.T.); +#124415 = VERTEX_POINT('',#124416); +#124416 = CARTESIAN_POINT('',(94.816295,-134.623926,1.585)); +#124417 = LINE('',#124418,#124419); +#124418 = CARTESIAN_POINT('',(94.797618,-134.605251,1.585)); +#124419 = VECTOR('',#124420,1.); +#124420 = DIRECTION('',(0.707144641962,-0.707068918384,0.)); +#124421 = ORIENTED_EDGE('',*,*,#124422,.T.); +#124422 = EDGE_CURVE('',#124415,#124423,#124425,.T.); +#124423 = VERTEX_POINT('',#124424); +#124424 = CARTESIAN_POINT('',(94.816295,-135.090853,1.585)); +#124425 = LINE('',#124426,#124427); +#124426 = CARTESIAN_POINT('',(94.816295,-134.623926,1.585)); +#124427 = VECTOR('',#124428,1.); +#124428 = DIRECTION('',(0.,-1.,0.)); +#124429 = ORIENTED_EDGE('',*,*,#124430,.T.); +#124430 = EDGE_CURVE('',#124423,#124431,#124433,.T.); +#124431 = VERTEX_POINT('',#124432); +#124432 = CARTESIAN_POINT('',(94.722909,-135.52043,1.585)); +#124433 = LINE('',#124434,#124435); +#124434 = CARTESIAN_POINT('',(94.816295,-135.090853,1.585)); +#124435 = VECTOR('',#124436,1.); +#124436 = DIRECTION('',(-0.21242898326,-0.977176507634,0.)); +#124437 = ORIENTED_EDGE('',*,*,#124438,.T.); +#124438 = EDGE_CURVE('',#124431,#124439,#124441,.T.); +#124439 = VERTEX_POINT('',#124440); +#124440 = CARTESIAN_POINT('',(94.592174,-135.763233,1.585)); +#124441 = LINE('',#124442,#124443); +#124442 = CARTESIAN_POINT('',(94.722909,-135.52043,1.585)); +#124443 = VECTOR('',#124444,1.); +#124444 = DIRECTION('',(-0.474085550618,-0.880478784921,0.)); +#124445 = ORIENTED_EDGE('',*,*,#124446,.T.); +#124446 = EDGE_CURVE('',#124439,#124447,#124449,.T.); +#124447 = VERTEX_POINT('',#124448); +#124448 = CARTESIAN_POINT('',(94.405396,-135.968676,1.585)); +#124449 = LINE('',#124450,#124451); +#124450 = CARTESIAN_POINT('',(94.592174,-135.763233,1.585)); +#124451 = VECTOR('',#124452,1.); +#124452 = DIRECTION('',(-0.67269573948,-0.739919213216,0.)); +#124453 = ORIENTED_EDGE('',*,*,#124454,.T.); +#124454 = EDGE_CURVE('',#124447,#124455,#124457,.T.); +#124455 = VERTEX_POINT('',#124456); +#124456 = CARTESIAN_POINT('',(94.274651,-136.062061,1.585)); +#124457 = LINE('',#124458,#124459); +#124458 = CARTESIAN_POINT('',(94.405396,-135.968676,1.585)); +#124459 = VECTOR('',#124460,1.); +#124460 = DIRECTION('',(-0.813746087064,-0.581220531114,0.)); +#124461 = ORIENTED_EDGE('',*,*,#124462,.T.); +#124462 = EDGE_CURVE('',#124455,#124463,#124465,.T.); +#124463 = VERTEX_POINT('',#124464); +#124464 = CARTESIAN_POINT('',(94.106564,-136.136776,1.585)); +#124465 = LINE('',#124466,#124467); +#124466 = CARTESIAN_POINT('',(94.274651,-136.062061,1.585)); +#124467 = VECTOR('',#124468,1.); +#124468 = DIRECTION('',(-0.913792043698,-0.406182349289,0.)); +#124469 = ORIENTED_EDGE('',*,*,#124470,.T.); +#124470 = EDGE_CURVE('',#124463,#124471,#124473,.T.); +#124471 = VERTEX_POINT('',#124472); +#124472 = CARTESIAN_POINT('',(93.826404,-136.136776,1.585)); +#124473 = LINE('',#124474,#124475); +#124474 = CARTESIAN_POINT('',(94.106564,-136.136776,1.585)); +#124475 = VECTOR('',#124476,1.); +#124476 = DIRECTION('',(-1.,0.,0.)); +#124477 = ORIENTED_EDGE('',*,*,#124478,.T.); +#124478 = EDGE_CURVE('',#124471,#124479,#124481,.T.); +#124479 = VERTEX_POINT('',#124480); +#124480 = CARTESIAN_POINT('',(93.396831,-135.763233,1.585)); +#124481 = CIRCLE('',#124482,0.550647120207); +#124482 = AXIS2_PLACEMENT_3D('',#124483,#124484,#124485); +#124483 = CARTESIAN_POINT('',(93.920925050779,-135.5943020172,1.585)); +#124484 = DIRECTION('',(0.,0.,-1.)); +#124485 = DIRECTION('',(-0.171654490345,-0.985157213821,-0.)); +#124486 = ORIENTED_EDGE('',*,*,#124487,.T.); +#124487 = EDGE_CURVE('',#124479,#124488,#124490,.T.); +#124488 = VERTEX_POINT('',#124489); +#124489 = CARTESIAN_POINT('',(93.378156,-135.66985,1.585)); +#124490 = LINE('',#124491,#124492); +#124491 = CARTESIAN_POINT('',(93.396831,-135.763233,1.585)); +#124492 = VECTOR('',#124493,1.); +#124493 = DIRECTION('',(-0.196099980237,0.980583906533,0.)); +#124494 = ORIENTED_EDGE('',*,*,#124495,.T.); +#124495 = EDGE_CURVE('',#124488,#124496,#124498,.T.); +#124496 = VERTEX_POINT('',#124497); +#124497 = CARTESIAN_POINT('',(93.378156,-135.501753,1.585)); +#124498 = LINE('',#124499,#124500); +#124499 = CARTESIAN_POINT('',(93.378156,-135.66985,1.585)); +#124500 = VECTOR('',#124501,1.); +#124501 = DIRECTION('',(0.,1.,0.)); +#124502 = ORIENTED_EDGE('',*,*,#124503,.T.); +#124503 = EDGE_CURVE('',#124496,#124504,#124506,.T.); +#124504 = VERTEX_POINT('',#124505); +#124505 = CARTESIAN_POINT('',(93.452857,-135.296307,1.585)); +#124506 = LINE('',#124507,#124508); +#124507 = CARTESIAN_POINT('',(93.378156,-135.501753,1.585)); +#124508 = VECTOR('',#124509,1.); +#124509 = DIRECTION('',(0.34171625064,0.939803173036,0.)); +#124510 = ORIENTED_EDGE('',*,*,#124511,.T.); +#124511 = EDGE_CURVE('',#124504,#124512,#124514,.T.); +#124512 = VERTEX_POINT('',#124513); +#124513 = CARTESIAN_POINT('',(93.714345,-135.034831,1.585)); +#124514 = LINE('',#124515,#124516); +#124515 = CARTESIAN_POINT('',(93.452857,-135.296307,1.585)); +#124516 = VECTOR('',#124517,1.); +#124517 = DIRECTION('',(0.707123006365,0.707090555636,0.)); +#124518 = ORIENTED_EDGE('',*,*,#124519,.T.); +#124519 = EDGE_CURVE('',#124512,#124520,#124522,.T.); +#124520 = VERTEX_POINT('',#124521); +#124521 = CARTESIAN_POINT('',(93.751692,-135.034831,1.585)); +#124522 = LINE('',#124523,#124524); +#124523 = CARTESIAN_POINT('',(93.714345,-135.034831,1.585)); +#124524 = VECTOR('',#124525,1.); +#124525 = DIRECTION('',(1.,0.,0.)); +#124526 = ORIENTED_EDGE('',*,*,#124527,.T.); +#124527 = EDGE_CURVE('',#124520,#124528,#124530,.T.); +#124528 = VERTEX_POINT('',#124529); +#124529 = CARTESIAN_POINT('',(94.013174,-134.848052,1.585)); +#124530 = LINE('',#124531,#124532); +#124531 = CARTESIAN_POINT('',(93.751692,-135.034831,1.585)); +#124532 = VECTOR('',#124533,1.); +#124533 = DIRECTION('',(0.813724429571,0.581250851802,0.)); +#124534 = ORIENTED_EDGE('',*,*,#124535,.T.); +#124535 = EDGE_CURVE('',#124528,#124381,#124536,.T.); +#124536 = LINE('',#124537,#124538); +#124537 = CARTESIAN_POINT('',(94.013174,-134.848052,1.585)); +#124538 = VECTOR('',#124539,1.); +#124539 = DIRECTION('',(0.447194441551,0.894436767718,0.)); +#124540 = FACE_BOUND('',#124541,.F.); +#124541 = EDGE_LOOP('',(#124542,#124552,#124560,#124568,#124576,#124584, + #124592,#124600,#124608,#124616,#124624)); +#124542 = ORIENTED_EDGE('',*,*,#124543,.T.); +#124543 = EDGE_CURVE('',#124544,#124546,#124548,.T.); +#124544 = VERTEX_POINT('',#124545); +#124545 = CARTESIAN_POINT('',(94.461426,-135.240275,1.585)); +#124546 = VERTEX_POINT('',#124547); +#124547 = CARTESIAN_POINT('',(94.480104,-134.978789,1.585)); +#124548 = LINE('',#124549,#124550); +#124549 = CARTESIAN_POINT('',(94.461426,-135.240275,1.585)); +#124550 = VECTOR('',#124551,1.); +#124551 = DIRECTION('',(7.12486765081E-02,0.997458583649,0.)); +#124552 = ORIENTED_EDGE('',*,*,#124553,.T.); +#124553 = EDGE_CURVE('',#124546,#124554,#124556,.T.); +#124554 = VERTEX_POINT('',#124555); +#124555 = CARTESIAN_POINT('',(94.461426,-134.960124,1.585)); +#124556 = LINE('',#124557,#124558); +#124557 = CARTESIAN_POINT('',(94.480104,-134.978789,1.585)); +#124558 = VECTOR('',#124559,1.); +#124559 = DIRECTION('',(-0.707352899269,0.70686057741,0.)); +#124560 = ORIENTED_EDGE('',*,*,#124561,.T.); +#124561 = EDGE_CURVE('',#124554,#124562,#124564,.T.); +#124562 = VERTEX_POINT('',#124563); +#124563 = CARTESIAN_POINT('',(93.975823,-135.277626,1.585)); +#124564 = LINE('',#124565,#124566); +#124565 = CARTESIAN_POINT('',(94.461426,-134.960124,1.585)); +#124566 = VECTOR('',#124567,1.); +#124567 = DIRECTION('',(-0.836975656276,-0.547240121702,0.)); +#124568 = ORIENTED_EDGE('',*,*,#124569,.T.); +#124569 = EDGE_CURVE('',#124562,#124570,#124572,.T.); +#124570 = VERTEX_POINT('',#124571); +#124571 = CARTESIAN_POINT('',(93.789049,-135.445712,1.585)); +#124572 = LINE('',#124573,#124574); +#124573 = CARTESIAN_POINT('',(93.975823,-135.277626,1.585)); +#124574 = VECTOR('',#124575,1.); +#124575 = DIRECTION('',(-0.743315122059,-0.66894142443,0.)); +#124576 = ORIENTED_EDGE('',*,*,#124577,.T.); +#124577 = EDGE_CURVE('',#124570,#124578,#124580,.T.); +#124578 = VERTEX_POINT('',#124579); +#124579 = CARTESIAN_POINT('',(93.751692,-135.52043,1.585)); +#124580 = LINE('',#124581,#124582); +#124581 = CARTESIAN_POINT('',(93.789049,-135.445712,1.585)); +#124582 = VECTOR('',#124583,1.); +#124583 = DIRECTION('',(-0.447194442063,-0.894436767462,0.)); +#124584 = ORIENTED_EDGE('',*,*,#124585,.T.); +#124585 = EDGE_CURVE('',#124578,#124586,#124588,.T.); +#124586 = VERTEX_POINT('',#124587); +#124587 = CARTESIAN_POINT('',(93.751692,-135.66985,1.585)); +#124588 = LINE('',#124589,#124590); +#124589 = CARTESIAN_POINT('',(93.751692,-135.52043,1.585)); +#124590 = VECTOR('',#124591,1.); +#124591 = DIRECTION('',(0.,-1.,0.)); +#124592 = ORIENTED_EDGE('',*,*,#124593,.T.); +#124593 = EDGE_CURVE('',#124586,#124594,#124596,.T.); +#124594 = VERTEX_POINT('',#124595); +#124595 = CARTESIAN_POINT('',(93.845079,-135.78191,1.585)); +#124596 = LINE('',#124597,#124598); +#124597 = CARTESIAN_POINT('',(93.751692,-135.66985,1.585)); +#124598 = VECTOR('',#124599,1.); +#124599 = DIRECTION('',(0.640199234042,-0.768208917373,0.)); +#124600 = ORIENTED_EDGE('',*,*,#124601,.T.); +#124601 = EDGE_CURVE('',#124594,#124602,#124604,.T.); +#124602 = VERTEX_POINT('',#124603); +#124603 = CARTESIAN_POINT('',(94.031852,-135.800585,1.585)); +#124604 = LINE('',#124605,#124606); +#124605 = CARTESIAN_POINT('',(93.845079,-135.78191,1.585)); +#124606 = VECTOR('',#124607,1.); +#124607 = DIRECTION('',(0.995038403335,-9.949158701896E-02,0.)); +#124608 = ORIENTED_EDGE('',*,*,#124609,.T.); +#124609 = EDGE_CURVE('',#124602,#124610,#124612,.T.); +#124610 = VERTEX_POINT('',#124611); +#124611 = CARTESIAN_POINT('',(94.106564,-135.763233,1.585)); +#124612 = LINE('',#124613,#124614); +#124613 = CARTESIAN_POINT('',(94.031852,-135.800585,1.585)); +#124614 = VECTOR('',#124615,1.); +#124615 = DIRECTION('',(0.894446345257,0.447175284935,0.)); +#124616 = ORIENTED_EDGE('',*,*,#124617,.T.); +#124617 = EDGE_CURVE('',#124610,#124618,#124620,.T.); +#124618 = VERTEX_POINT('',#124619); +#124619 = CARTESIAN_POINT('',(94.349367,-135.501753,1.585)); +#124620 = LINE('',#124621,#124622); +#124621 = CARTESIAN_POINT('',(94.106564,-135.763233,1.585)); +#124622 = VECTOR('',#124623,1.); +#124623 = DIRECTION('',(0.680451314352,0.732793291997,0.)); +#124624 = ORIENTED_EDGE('',*,*,#124625,.T.); +#124625 = EDGE_CURVE('',#124618,#124544,#124626,.T.); +#124626 = LINE('',#124627,#124628); +#124627 = CARTESIAN_POINT('',(94.349367,-135.501753,1.585)); +#124628 = VECTOR('',#124629,1.); +#124629 = DIRECTION('',(0.393910389333,0.919148848215,0.)); +#124630 = PLANE('',#124631); +#124631 = AXIS2_PLACEMENT_3D('',#124632,#124633,#124634); +#124632 = CARTESIAN_POINT('',(0.,0.,1.585)); +#124633 = DIRECTION('',(0.,0.,1.)); +#124634 = DIRECTION('',(1.,0.,-0.)); +#124635 = SHELL_BASED_SURFACE_MODEL('',(#124636)); +#124636 = OPEN_SHELL('',(#124637)); +#124637 = ADVANCED_FACE('',(#124638,#125200),#125674,.T.); +#124638 = FACE_BOUND('',#124639,.F.); +#124639 = EDGE_LOOP('',(#124640,#124650,#124658,#124666,#124674,#124682, + #124690,#124698,#124706,#124714,#124722,#124730,#124738,#124746, + #124754,#124762,#124770,#124778,#124786,#124794,#124802,#124810, + #124818,#124826,#124834,#124842,#124850,#124858,#124866,#124874, + #124882,#124890,#124898,#124906,#124914,#124922,#124930,#124938, + #124946,#124954,#124962,#124970,#124978,#124986,#124994,#125002, + #125010,#125018,#125026,#125034,#125042,#125050,#125058,#125066, + #125074,#125082,#125090,#125098,#125106,#125114,#125122,#125130, + #125138,#125146,#125154,#125162,#125170,#125178,#125186,#125194)); +#124640 = ORIENTED_EDGE('',*,*,#124641,.T.); +#124641 = EDGE_CURVE('',#124642,#124644,#124646,.T.); +#124642 = VERTEX_POINT('',#124643); +#124643 = CARTESIAN_POINT('',(92.612384,-132.214581,1.585)); +#124644 = VERTEX_POINT('',#124645); +#124645 = CARTESIAN_POINT('',(92.631068,-132.195896,1.585)); +#124646 = LINE('',#124647,#124648); +#124647 = CARTESIAN_POINT('',(92.612384,-132.214581,1.585)); +#124648 = VECTOR('',#124649,1.); +#124649 = DIRECTION('',(0.70708785865,0.707125703216,0.)); +#124650 = ORIENTED_EDGE('',*,*,#124651,.T.); +#124651 = EDGE_CURVE('',#124644,#124652,#124654,.T.); +#124652 = VERTEX_POINT('',#124653); +#124653 = CARTESIAN_POINT('',(93.060636,-132.195896,1.585)); +#124654 = LINE('',#124655,#124656); +#124655 = CARTESIAN_POINT('',(92.631068,-132.195896,1.585)); +#124656 = VECTOR('',#124657,1.); +#124657 = DIRECTION('',(1.,0.,0.)); +#124658 = ORIENTED_EDGE('',*,*,#124659,.T.); +#124659 = EDGE_CURVE('',#124652,#124660,#124662,.T.); +#124660 = VERTEX_POINT('',#124661); +#124661 = CARTESIAN_POINT('',(93.228736,-132.233253,1.585)); +#124662 = LINE('',#124663,#124664); +#124663 = CARTESIAN_POINT('',(93.060636,-132.195896,1.585)); +#124664 = VECTOR('',#124665,1.); +#124665 = DIRECTION('',(0.97618528384,-0.21693845121,0.)); +#124666 = ORIENTED_EDGE('',*,*,#124667,.T.); +#124667 = EDGE_CURVE('',#124660,#124668,#124670,.T.); +#124668 = VERTEX_POINT('',#124669); +#124669 = CARTESIAN_POINT('',(93.359473,-132.233253,1.585)); +#124670 = LINE('',#124671,#124672); +#124671 = CARTESIAN_POINT('',(93.228736,-132.233253,1.585)); +#124672 = VECTOR('',#124673,1.); +#124673 = DIRECTION('',(1.,0.,0.)); +#124674 = ORIENTED_EDGE('',*,*,#124675,.T.); +#124675 = EDGE_CURVE('',#124668,#124676,#124678,.T.); +#124676 = VERTEX_POINT('',#124677); +#124677 = CARTESIAN_POINT('',(93.882437,-132.363993,1.585)); +#124678 = LINE('',#124679,#124680); +#124679 = CARTESIAN_POINT('',(93.359473,-132.233253,1.585)); +#124680 = VECTOR('',#124681,1.); +#124681 = DIRECTION('',(0.970142936634,-0.242533879073,0.)); +#124682 = ORIENTED_EDGE('',*,*,#124683,.T.); +#124683 = EDGE_CURVE('',#124676,#124684,#124686,.T.); +#124684 = VERTEX_POINT('',#124685); +#124685 = CARTESIAN_POINT('',(94.386719,-132.60679,1.585)); +#124686 = LINE('',#124687,#124688); +#124687 = CARTESIAN_POINT('',(93.882437,-132.363993,1.585)); +#124688 = VECTOR('',#124689,1.); +#124689 = DIRECTION('',(0.901005471954,-0.433807721818,0.)); +#124690 = ORIENTED_EDGE('',*,*,#124691,.T.); +#124691 = EDGE_CURVE('',#124684,#124692,#124694,.T.); +#124692 = VERTEX_POINT('',#124693); +#124693 = CARTESIAN_POINT('',(94.760264,-132.868274,1.585)); +#124694 = LINE('',#124695,#124696); +#124695 = CARTESIAN_POINT('',(94.386719,-132.60679,1.585)); +#124696 = VECTOR('',#124697,1.); +#124697 = DIRECTION('',(0.819229344698,-0.573466024091,0.)); +#124698 = ORIENTED_EDGE('',*,*,#124699,.T.); +#124699 = EDGE_CURVE('',#124692,#124700,#124702,.T.); +#124700 = VERTEX_POINT('',#124701); +#124701 = CARTESIAN_POINT('',(94.85364,-132.96166,1.585)); +#124702 = LINE('',#124703,#124704); +#124703 = CARTESIAN_POINT('',(94.760264,-132.868274,1.585)); +#124704 = VECTOR('',#124705,1.); +#124705 = DIRECTION('',(0.707068918789,-0.707144641557,0.)); +#124706 = ORIENTED_EDGE('',*,*,#124707,.T.); +#124707 = EDGE_CURVE('',#124700,#124708,#124710,.T.); +#124708 = VERTEX_POINT('',#124709); +#124709 = CARTESIAN_POINT('',(94.909679,-132.980337,1.585)); +#124710 = LINE('',#124711,#124712); +#124711 = CARTESIAN_POINT('',(94.85364,-132.96166,1.585)); +#124712 = VECTOR('',#124713,1.); +#124713 = DIRECTION('',(0.94869684056,-0.316187135587,0.)); +#124714 = ORIENTED_EDGE('',*,*,#124715,.T.); +#124715 = EDGE_CURVE('',#124708,#124716,#124718,.T.); +#124716 = VERTEX_POINT('',#124717); +#124717 = CARTESIAN_POINT('',(95.264543,-133.353875,1.585)); +#124718 = LINE('',#124719,#124720); +#124719 = CARTESIAN_POINT('',(94.909679,-132.980337,1.585)); +#124720 = VECTOR('',#124721,1.); +#124721 = DIRECTION('',(0.688752420429,-0.724996622994,0.)); +#124722 = ORIENTED_EDGE('',*,*,#124723,.T.); +#124723 = EDGE_CURVE('',#124716,#124724,#124726,.T.); +#124724 = VERTEX_POINT('',#124725); +#124725 = CARTESIAN_POINT('',(95.264543,-133.391234,1.585)); +#124726 = LINE('',#124727,#124728); +#124727 = CARTESIAN_POINT('',(95.264543,-133.353875,1.585)); +#124728 = VECTOR('',#124729,1.); +#124729 = DIRECTION('',(0.,-1.,0.)); +#124730 = ORIENTED_EDGE('',*,*,#124731,.T.); +#124731 = EDGE_CURVE('',#124724,#124732,#124734,.T.); +#124732 = VERTEX_POINT('',#124733); +#124733 = CARTESIAN_POINT('',(95.451309,-133.634038,1.585)); +#124734 = LINE('',#124735,#124736); +#124735 = CARTESIAN_POINT('',(95.264543,-133.391234,1.585)); +#124736 = VECTOR('',#124737,1.); +#124737 = DIRECTION('',(0.609697824121,-0.792633940267,0.)); +#124738 = ORIENTED_EDGE('',*,*,#124739,.T.); +#124739 = EDGE_CURVE('',#124732,#124740,#124742,.T.); +#124740 = VERTEX_POINT('',#124741); +#124741 = CARTESIAN_POINT('',(95.65676,-134.007581,1.585)); +#124742 = LINE('',#124743,#124744); +#124743 = CARTESIAN_POINT('',(95.451309,-133.634038,1.585)); +#124744 = VECTOR('',#124745,1.); +#124745 = DIRECTION('',(0.481922981902,-0.876213580992,0.)); +#124746 = ORIENTED_EDGE('',*,*,#124747,.T.); +#124747 = EDGE_CURVE('',#124740,#124748,#124750,.T.); +#124748 = VERTEX_POINT('',#124749); +#124749 = CARTESIAN_POINT('',(95.806182,-134.455836,1.585)); +#124750 = LINE('',#124751,#124752); +#124751 = CARTESIAN_POINT('',(95.65676,-134.007581,1.585)); +#124752 = VECTOR('',#124753,1.); +#124753 = DIRECTION('',(0.316234750085,-0.948680969999,0.)); +#124754 = ORIENTED_EDGE('',*,*,#124755,.T.); +#124755 = EDGE_CURVE('',#124748,#124756,#124758,.T.); +#124756 = VERTEX_POINT('',#124757); +#124757 = CARTESIAN_POINT('',(95.843545,-134.642604,1.585)); +#124758 = LINE('',#124759,#124760); +#124759 = CARTESIAN_POINT('',(95.806182,-134.455836,1.585)); +#124760 = VECTOR('',#124761,1.); +#124761 = DIRECTION('',(0.196163588728,-0.980571183779,0.)); +#124762 = ORIENTED_EDGE('',*,*,#124763,.T.); +#124763 = EDGE_CURVE('',#124756,#124764,#124766,.T.); +#124764 = VERTEX_POINT('',#124765); +#124765 = CARTESIAN_POINT('',(95.843545,-134.773337,1.585)); +#124766 = LINE('',#124767,#124768); +#124767 = CARTESIAN_POINT('',(95.843545,-134.642604,1.585)); +#124768 = VECTOR('',#124769,1.); +#124769 = DIRECTION('',(0.,-1.,0.)); +#124770 = ORIENTED_EDGE('',*,*,#124771,.T.); +#124771 = EDGE_CURVE('',#124764,#124772,#124774,.T.); +#124772 = VERTEX_POINT('',#124773); +#124773 = CARTESIAN_POINT('',(95.86221,-134.792014,1.585)); +#124774 = LINE('',#124775,#124776); +#124775 = CARTESIAN_POINT('',(95.843545,-134.773337,1.585)); +#124776 = VECTOR('',#124777,1.); +#124777 = DIRECTION('',(0.706879513115,-0.707333976236,0.)); +#124778 = ORIENTED_EDGE('',*,*,#124779,.T.); +#124779 = EDGE_CURVE('',#124772,#124780,#124782,.T.); +#124780 = VERTEX_POINT('',#124781); +#124781 = CARTESIAN_POINT('',(95.86221,-134.941441,1.585)); +#124782 = LINE('',#124783,#124784); +#124783 = CARTESIAN_POINT('',(95.86221,-134.792014,1.585)); +#124784 = VECTOR('',#124785,1.); +#124785 = DIRECTION('',(0.,-1.,0.)); +#124786 = ORIENTED_EDGE('',*,*,#124787,.T.); +#124787 = EDGE_CURVE('',#124780,#124788,#124790,.T.); +#124788 = VERTEX_POINT('',#124789); +#124789 = CARTESIAN_POINT('',(95.880892,-134.960124,1.585)); +#124790 = LINE('',#124791,#124792); +#124791 = CARTESIAN_POINT('',(95.86221,-134.941441,1.585)); +#124792 = VECTOR('',#124793,1.); +#124793 = DIRECTION('',(0.707087856625,-0.707125705242,0.)); +#124794 = ORIENTED_EDGE('',*,*,#124795,.T.); +#124795 = EDGE_CURVE('',#124788,#124796,#124798,.T.); +#124796 = VERTEX_POINT('',#124797); +#124797 = CARTESIAN_POINT('',(95.880892,-135.389689,1.585)); +#124798 = LINE('',#124799,#124800); +#124799 = CARTESIAN_POINT('',(95.880892,-134.960124,1.585)); +#124800 = VECTOR('',#124801,1.); +#124801 = DIRECTION('',(0.,-1.,0.)); +#124802 = ORIENTED_EDGE('',*,*,#124803,.T.); +#124803 = EDGE_CURVE('',#124796,#124804,#124806,.T.); +#124804 = VERTEX_POINT('',#124805); +#124805 = CARTESIAN_POINT('',(95.86221,-135.408364,1.585)); +#124806 = LINE('',#124807,#124808); +#124807 = CARTESIAN_POINT('',(95.880892,-135.389689,1.585)); +#124808 = VECTOR('',#124809,1.); +#124809 = DIRECTION('',(-0.707239267297,-0.706974270248,0.)); +#124810 = ORIENTED_EDGE('',*,*,#124811,.T.); +#124811 = EDGE_CURVE('',#124804,#124812,#124814,.T.); +#124812 = VERTEX_POINT('',#124813); +#124813 = CARTESIAN_POINT('',(95.843545,-135.707206,1.585)); +#124814 = LINE('',#124815,#124816); +#124815 = CARTESIAN_POINT('',(95.86221,-135.408364,1.585)); +#124816 = VECTOR('',#124817,1.); +#124817 = DIRECTION('',(-6.233628591939E-02,-0.99805520261,0.)); +#124818 = ORIENTED_EDGE('',*,*,#124819,.T.); +#124819 = EDGE_CURVE('',#124812,#124820,#124822,.T.); +#124820 = VERTEX_POINT('',#124821); +#124821 = CARTESIAN_POINT('',(95.712799,-136.192802,1.585)); +#124822 = LINE('',#124823,#124824); +#124823 = CARTESIAN_POINT('',(95.843545,-135.707206,1.585)); +#124824 = VECTOR('',#124825,1.); +#124825 = DIRECTION('',(-0.259989447302,-0.965611457726,0.)); +#124826 = ORIENTED_EDGE('',*,*,#124827,.T.); +#124827 = EDGE_CURVE('',#124820,#124828,#124830,.T.); +#124828 = VERTEX_POINT('',#124829); +#124829 = CARTESIAN_POINT('',(95.582056,-136.491642,1.585)); +#124830 = LINE('',#124831,#124832); +#124831 = CARTESIAN_POINT('',(95.712799,-136.192802,1.585)); +#124832 = VECTOR('',#124833,1.); +#124833 = DIRECTION('',(-0.400820120612,-0.916156772017,0.)); +#124834 = ORIENTED_EDGE('',*,*,#124835,.T.); +#124835 = EDGE_CURVE('',#124828,#124836,#124838,.T.); +#124836 = VERTEX_POINT('',#124837); +#124837 = CARTESIAN_POINT('',(95.451309,-136.715768,1.585)); +#124838 = LINE('',#124839,#124840); +#124839 = CARTESIAN_POINT('',(95.582056,-136.491642,1.585)); +#124840 = VECTOR('',#124841,1.); +#124841 = DIRECTION('',(-0.503890674481,-0.863767438707,0.)); +#124842 = ORIENTED_EDGE('',*,*,#124843,.T.); +#124843 = EDGE_CURVE('',#124836,#124844,#124846,.T.); +#124844 = VERTEX_POINT('',#124845); +#124845 = CARTESIAN_POINT('',(95.152481,-137.145344,1.585)); +#124846 = LINE('',#124847,#124848); +#124847 = CARTESIAN_POINT('',(95.451309,-136.715768,1.585)); +#124848 = VECTOR('',#124849,1.); +#124849 = DIRECTION('',(-0.571054857785,-0.82091190112,0.)); +#124850 = ORIENTED_EDGE('',*,*,#124851,.T.); +#124851 = EDGE_CURVE('',#124844,#124852,#124854,.T.); +#124852 = VERTEX_POINT('',#124853); +#124853 = CARTESIAN_POINT('',(94.928354,-137.369469,1.585)); +#124854 = LINE('',#124855,#124856); +#124855 = CARTESIAN_POINT('',(95.152481,-137.145344,1.585)); +#124856 = VECTOR('',#124857,1.); +#124857 = DIRECTION('',(-0.707109936132,-0.707103626227,0.)); +#124858 = ORIENTED_EDGE('',*,*,#124859,.T.); +#124859 = EDGE_CURVE('',#124852,#124860,#124862,.T.); +#124860 = VERTEX_POINT('',#124861); +#124861 = CARTESIAN_POINT('',(94.648195,-137.593596,1.585)); +#124862 = LINE('',#124863,#124864); +#124863 = CARTESIAN_POINT('',(94.928354,-137.369469,1.585)); +#124864 = VECTOR('',#124865,1.); +#124865 = DIRECTION('',(-0.780869081368,-0.624694707648,0.)); +#124866 = ORIENTED_EDGE('',*,*,#124867,.T.); +#124867 = EDGE_CURVE('',#124860,#124868,#124870,.T.); +#124868 = VERTEX_POINT('',#124869); +#124869 = CARTESIAN_POINT('',(94.349367,-137.799046,1.585)); +#124870 = LINE('',#124871,#124872); +#124871 = CARTESIAN_POINT('',(94.648195,-137.593596,1.585)); +#124872 = VECTOR('',#124873,1.); +#124873 = DIRECTION('',(-0.824034521887,-0.566539589736,0.)); +#124874 = ORIENTED_EDGE('',*,*,#124875,.T.); +#124875 = EDGE_CURVE('',#124868,#124876,#124878,.T.); +#124876 = VERTEX_POINT('',#124877); +#124877 = CARTESIAN_POINT('',(94.031852,-137.967139,1.585)); +#124878 = LINE('',#124879,#124880); +#124879 = CARTESIAN_POINT('',(94.349367,-137.799046,1.585)); +#124880 = VECTOR('',#124881,1.); +#124881 = DIRECTION('',(-0.883791572438,-0.467880814405,0.)); +#124882 = ORIENTED_EDGE('',*,*,#124883,.T.); +#124883 = EDGE_CURVE('',#124876,#124884,#124886,.T.); +#124884 = VERTEX_POINT('',#124885); +#124885 = CARTESIAN_POINT('',(93.602281,-138.116548,1.585)); +#124886 = LINE('',#124887,#124888); +#124887 = CARTESIAN_POINT('',(94.031852,-137.967139,1.585)); +#124888 = VECTOR('',#124889,1.); +#124889 = DIRECTION('',(-0.944501572217,-0.328506895026,0.)); +#124890 = ORIENTED_EDGE('',*,*,#124891,.T.); +#124891 = EDGE_CURVE('',#124884,#124892,#124894,.T.); +#124892 = VERTEX_POINT('',#124893); +#124893 = CARTESIAN_POINT('',(93.508893,-138.116548,1.585)); +#124894 = LINE('',#124895,#124896); +#124895 = CARTESIAN_POINT('',(93.602281,-138.116548,1.585)); +#124896 = VECTOR('',#124897,1.); +#124897 = DIRECTION('',(-1.,0.,0.)); +#124898 = ORIENTED_EDGE('',*,*,#124899,.T.); +#124899 = EDGE_CURVE('',#124892,#124900,#124902,.T.); +#124900 = VERTEX_POINT('',#124901); +#124901 = CARTESIAN_POINT('',(93.303449,-138.172583,1.585)); +#124902 = LINE('',#124903,#124904); +#124903 = CARTESIAN_POINT('',(93.508893,-138.116548,1.585)); +#124904 = VECTOR('',#124905,1.); +#124905 = DIRECTION('',(-0.96475807748,-0.263138465332,0.)); +#124906 = ORIENTED_EDGE('',*,*,#124907,.T.); +#124907 = EDGE_CURVE('',#124900,#124908,#124910,.T.); +#124908 = VERTEX_POINT('',#124909); +#124909 = CARTESIAN_POINT('',(93.172703,-138.172583,1.585)); +#124910 = LINE('',#124911,#124912); +#124911 = CARTESIAN_POINT('',(93.303449,-138.172583,1.585)); +#124912 = VECTOR('',#124913,1.); +#124913 = DIRECTION('',(-1.,0.,0.)); +#124914 = ORIENTED_EDGE('',*,*,#124915,.T.); +#124915 = EDGE_CURVE('',#124908,#124916,#124918,.T.); +#124916 = VERTEX_POINT('',#124917); +#124917 = CARTESIAN_POINT('',(93.154023,-138.191255,1.585)); +#124918 = LINE('',#124919,#124920); +#124919 = CARTESIAN_POINT('',(93.172703,-138.172583,1.585)); +#124920 = VECTOR('',#124921,1.); +#124921 = DIRECTION('',(-0.707258212123,-0.706955317814,0.)); +#124922 = ORIENTED_EDGE('',*,*,#124923,.T.); +#124923 = EDGE_CURVE('',#124916,#124924,#124926,.T.); +#124924 = VERTEX_POINT('',#124925); +#124925 = CARTESIAN_POINT('',(92.425619,-138.172583,1.585)); +#124926 = LINE('',#124927,#124928); +#124927 = CARTESIAN_POINT('',(93.154023,-138.191255,1.585)); +#124928 = VECTOR('',#124929,1.); +#124929 = DIRECTION('',(-0.999671607622,2.562570806521E-02,0.)); +#124930 = ORIENTED_EDGE('',*,*,#124931,.T.); +#124931 = EDGE_CURVE('',#124924,#124932,#124934,.T.); +#124932 = VERTEX_POINT('',#124933); +#124933 = CARTESIAN_POINT('',(92.126785,-138.116548,1.585)); +#124934 = LINE('',#124935,#124936); +#124935 = CARTESIAN_POINT('',(92.425619,-138.172583,1.585)); +#124936 = VECTOR('',#124937,1.); +#124937 = DIRECTION('',(-0.982870027286,0.184300052802,0.)); +#124938 = ORIENTED_EDGE('',*,*,#124939,.T.); +#124939 = EDGE_CURVE('',#124932,#124940,#124942,.T.); +#124940 = VERTEX_POINT('',#124941); +#124941 = CARTESIAN_POINT('',(91.827944,-138.023164,1.585)); +#124942 = LINE('',#124943,#124944); +#124943 = CARTESIAN_POINT('',(92.126785,-138.116548,1.585)); +#124944 = VECTOR('',#124945,1.); +#124945 = DIRECTION('',(-0.954483444714,0.298263899536,0.)); +#124946 = ORIENTED_EDGE('',*,*,#124947,.T.); +#124947 = EDGE_CURVE('',#124940,#124948,#124950,.T.); +#124948 = VERTEX_POINT('',#124949); +#124949 = CARTESIAN_POINT('',(91.3797,-137.817723,1.585)); +#124950 = LINE('',#124951,#124952); +#124951 = CARTESIAN_POINT('',(91.827944,-138.023164,1.585)); +#124952 = VECTOR('',#124953,1.); +#124953 = DIRECTION('',(-0.909068023544,0.416647727186,0.)); +#124954 = ORIENTED_EDGE('',*,*,#124955,.T.); +#124955 = EDGE_CURVE('',#124948,#124956,#124958,.T.); +#124956 = VERTEX_POINT('',#124957); +#124957 = CARTESIAN_POINT('',(91.155569,-137.649622,1.585)); +#124958 = LINE('',#124959,#124960); +#124959 = CARTESIAN_POINT('',(91.3797,-137.817723,1.585)); +#124960 = VECTOR('',#124961,1.); +#124961 = DIRECTION('',(-0.799995288473,0.600006281985,0.)); +#124962 = ORIENTED_EDGE('',*,*,#124963,.T.); +#124963 = EDGE_CURVE('',#124956,#124964,#124966,.T.); +#124964 = VERTEX_POINT('',#124965); +#124965 = CARTESIAN_POINT('',(91.099545,-137.630951,1.585)); +#124966 = LINE('',#124967,#124968); +#124967 = CARTESIAN_POINT('',(91.155569,-137.649622,1.585)); +#124968 = VECTOR('',#124969,1.); +#124969 = DIRECTION('',(-0.948701923638,0.316171883768,0.)); +#124970 = ORIENTED_EDGE('',*,*,#124971,.T.); +#124971 = EDGE_CURVE('',#124964,#124972,#124974,.T.); +#124972 = VERTEX_POINT('',#124973); +#124973 = CARTESIAN_POINT('',(90.931446,-137.481529,1.585)); +#124974 = LINE('',#124975,#124976); +#124975 = CARTESIAN_POINT('',(91.099545,-137.630951,1.585)); +#124976 = VECTOR('',#124977,1.); +#124977 = DIRECTION('',(-0.747407846824,0.664365494668,0.)); +#124978 = ORIENTED_EDGE('',*,*,#124979,.T.); +#124979 = EDGE_CURVE('',#124972,#124980,#124982,.T.); +#124980 = VERTEX_POINT('',#124981); +#124981 = CARTESIAN_POINT('',(90.894094,-137.481529,1.585)); +#124982 = LINE('',#124983,#124984); +#124983 = CARTESIAN_POINT('',(90.931446,-137.481529,1.585)); +#124984 = VECTOR('',#124985,1.); +#124985 = DIRECTION('',(-1.,0.,0.)); +#124986 = ORIENTED_EDGE('',*,*,#124987,.T.); +#124987 = EDGE_CURVE('',#124980,#124988,#124990,.T.); +#124988 = VERTEX_POINT('',#124989); +#124989 = CARTESIAN_POINT('',(90.46452,-137.033288,1.585)); +#124990 = LINE('',#124991,#124992); +#124991 = CARTESIAN_POINT('',(90.894094,-137.481529,1.585)); +#124992 = VECTOR('',#124993,1.); +#124993 = DIRECTION('',(-0.691913514338,0.721980393554,0.)); +#124994 = ORIENTED_EDGE('',*,*,#124995,.T.); +#124995 = EDGE_CURVE('',#124988,#124996,#124998,.T.); +#124996 = VERTEX_POINT('',#124997); +#124997 = CARTESIAN_POINT('',(90.203039,-136.603707,1.585)); +#124998 = LINE('',#124999,#125000); +#124999 = CARTESIAN_POINT('',(90.46452,-137.033288,1.585)); +#125000 = VECTOR('',#125001,1.); +#125001 = DIRECTION('',(-0.519942468071,0.854201281839,0.)); +#125002 = ORIENTED_EDGE('',*,*,#125003,.T.); +#125003 = EDGE_CURVE('',#124996,#125004,#125006,.T.); +#125004 = VERTEX_POINT('',#125005); +#125005 = CARTESIAN_POINT('',(90.165685,-136.585022,1.585)); +#125006 = LINE('',#125007,#125008); +#125007 = CARTESIAN_POINT('',(90.203039,-136.603707,1.585)); +#125008 = VECTOR('',#125009,1.); +#125009 = DIRECTION('',(-0.894350561667,0.447366821351,0.)); +#125010 = ORIENTED_EDGE('',*,*,#125011,.T.); +#125011 = EDGE_CURVE('',#125004,#125012,#125014,.T.); +#125012 = VERTEX_POINT('',#125013); +#125013 = CARTESIAN_POINT('',(90.016264,-136.230161,1.585)); +#125014 = LINE('',#125015,#125016); +#125015 = CARTESIAN_POINT('',(90.165685,-136.585022,1.585)); +#125016 = VECTOR('',#125017,1.); +#125017 = DIRECTION('',(-0.388069888033,0.921629948516,0.)); +#125018 = ORIENTED_EDGE('',*,*,#125019,.T.); +#125019 = EDGE_CURVE('',#125012,#125020,#125022,.T.); +#125020 = VERTEX_POINT('',#125021); +#125021 = CARTESIAN_POINT('',(90.016264,-136.174131,1.585)); +#125022 = LINE('',#125023,#125024); +#125023 = CARTESIAN_POINT('',(90.016264,-136.230161,1.585)); +#125024 = VECTOR('',#125025,1.); +#125025 = DIRECTION('',(0.,1.,0.)); +#125026 = ORIENTED_EDGE('',*,*,#125027,.T.); +#125027 = EDGE_CURVE('',#125020,#125028,#125030,.T.); +#125028 = VERTEX_POINT('',#125029); +#125029 = CARTESIAN_POINT('',(89.978907,-136.118096,1.585)); +#125030 = LINE('',#125031,#125032); +#125031 = CARTESIAN_POINT('',(90.016264,-136.174131,1.585)); +#125032 = VECTOR('',#125033,1.); +#125033 = DIRECTION('',(-0.554703622848,0.832048009912,0.)); +#125034 = ORIENTED_EDGE('',*,*,#125035,.T.); +#125035 = EDGE_CURVE('',#125028,#125036,#125038,.T.); +#125036 = VERTEX_POINT('',#125037); +#125037 = CARTESIAN_POINT('',(89.904202,-135.837945,1.585)); +#125038 = LINE('',#125039,#125040); +#125039 = CARTESIAN_POINT('',(89.978907,-136.118096,1.585)); +#125040 = VECTOR('',#125041,1.); +#125041 = DIRECTION('',(-0.257656425209,0.966236599674,0.)); +#125042 = ORIENTED_EDGE('',*,*,#125043,.T.); +#125043 = EDGE_CURVE('',#125036,#125044,#125046,.T.); +#125044 = VERTEX_POINT('',#125045); +#125045 = CARTESIAN_POINT('',(89.866846,-135.464395,1.585)); +#125046 = LINE('',#125047,#125048); +#125047 = CARTESIAN_POINT('',(89.904202,-135.837945,1.585)); +#125048 = VECTOR('',#125049,1.); +#125049 = DIRECTION('',(-9.950635637864E-02,0.995036926471,0.)); +#125050 = ORIENTED_EDGE('',*,*,#125051,.T.); +#125051 = EDGE_CURVE('',#125044,#125052,#125054,.T.); +#125052 = VERTEX_POINT('',#125053); +#125053 = CARTESIAN_POINT('',(89.848173,-135.445712,1.585)); +#125054 = LINE('',#125055,#125056); +#125055 = CARTESIAN_POINT('',(89.866846,-135.464395,1.585)); +#125056 = VECTOR('',#125057,1.); +#125057 = DIRECTION('',(-0.70691746718,0.707296044521,0.)); +#125058 = ORIENTED_EDGE('',*,*,#125059,.T.); +#125059 = EDGE_CURVE('',#125052,#125060,#125062,.T.); +#125060 = VERTEX_POINT('',#125061); +#125061 = CARTESIAN_POINT('',(89.866846,-134.754664,1.585)); +#125062 = LINE('',#125063,#125064); +#125063 = CARTESIAN_POINT('',(89.848173,-135.445712,1.585)); +#125064 = VECTOR('',#125065,1.); +#125065 = DIRECTION('',(2.701141844044E-02,0.99963512507,0.)); +#125066 = ORIENTED_EDGE('',*,*,#125067,.T.); +#125067 = EDGE_CURVE('',#125060,#125068,#125070,.T.); +#125068 = VERTEX_POINT('',#125069); +#125069 = CARTESIAN_POINT('',(89.960229,-134.30642,1.585)); +#125070 = LINE('',#125071,#125072); +#125071 = CARTESIAN_POINT('',(89.866846,-134.754664,1.585)); +#125072 = VECTOR('',#125073,1.); +#125073 = DIRECTION('',(0.203951812061,0.978980928495,0.)); +#125074 = ORIENTED_EDGE('',*,*,#125075,.T.); +#125075 = EDGE_CURVE('',#125068,#125076,#125078,.T.); +#125076 = VERTEX_POINT('',#125077); +#125077 = CARTESIAN_POINT('',(90.034938,-134.082295,1.585)); +#125078 = LINE('',#125079,#125080); +#125079 = CARTESIAN_POINT('',(89.960229,-134.30642,1.585)); +#125080 = VECTOR('',#125081,1.); +#125081 = DIRECTION('',(0.316230305712,0.948682451482,0.)); +#125082 = ORIENTED_EDGE('',*,*,#125083,.T.); +#125083 = EDGE_CURVE('',#125076,#125084,#125086,.T.); +#125084 = VERTEX_POINT('',#125085); +#125085 = CARTESIAN_POINT('',(90.090976,-133.988905,1.585)); +#125086 = LINE('',#125087,#125088); +#125087 = CARTESIAN_POINT('',(90.034938,-134.082295,1.585)); +#125088 = VECTOR('',#125089,1.); +#125089 = DIRECTION('',(0.514522760102,0.85747672233,0.)); +#125090 = ORIENTED_EDGE('',*,*,#125091,.T.); +#125091 = EDGE_CURVE('',#125084,#125092,#125094,.T.); +#125092 = VERTEX_POINT('',#125093); +#125093 = CARTESIAN_POINT('',(90.090976,-133.932872,1.585)); +#125094 = LINE('',#125095,#125096); +#125095 = CARTESIAN_POINT('',(90.090976,-133.988905,1.585)); +#125096 = VECTOR('',#125097,1.); +#125097 = DIRECTION('',(0.,1.,0.)); +#125098 = ORIENTED_EDGE('',*,*,#125099,.T.); +#125099 = EDGE_CURVE('',#125092,#125100,#125102,.T.); +#125100 = VERTEX_POINT('',#125101); +#125101 = CARTESIAN_POINT('',(90.184359,-133.746102,1.585)); +#125102 = LINE('',#125103,#125104); +#125103 = CARTESIAN_POINT('',(90.090976,-133.932872,1.585)); +#125104 = VECTOR('',#125105,1.); +#125105 = DIRECTION('',(0.447205933174,0.894431022122,0.)); +#125106 = ORIENTED_EDGE('',*,*,#125107,.T.); +#125107 = EDGE_CURVE('',#125100,#125108,#125110,.T.); +#125108 = VERTEX_POINT('',#125109); +#125109 = CARTESIAN_POINT('',(90.259066,-133.671394,1.585)); +#125110 = LINE('',#125111,#125112); +#125111 = CARTESIAN_POINT('',(90.184359,-133.746102,1.585)); +#125112 = VECTOR('',#125113,1.); +#125113 = DIRECTION('',(0.707102048669,0.707111513673,0.)); +#125114 = ORIENTED_EDGE('',*,*,#125115,.T.); +#125115 = EDGE_CURVE('',#125108,#125116,#125118,.T.); +#125116 = VERTEX_POINT('',#125117); +#125117 = CARTESIAN_POINT('',(90.352459,-133.521974,1.585)); +#125118 = LINE('',#125119,#125120); +#125119 = CARTESIAN_POINT('',(90.259066,-133.671394,1.585)); +#125120 = VECTOR('',#125121,1.); +#125121 = DIRECTION('',(0.530021385444,0.847984275192,0.)); +#125122 = ORIENTED_EDGE('',*,*,#125123,.T.); +#125123 = EDGE_CURVE('',#125116,#125124,#125126,.T.); +#125124 = VERTEX_POINT('',#125125); +#125125 = CARTESIAN_POINT('',(90.352459,-133.484619,1.585)); +#125126 = LINE('',#125127,#125128); +#125127 = CARTESIAN_POINT('',(90.352459,-133.521974,1.585)); +#125128 = VECTOR('',#125129,1.); +#125129 = DIRECTION('',(0.,1.,0.)); +#125130 = ORIENTED_EDGE('',*,*,#125131,.T.); +#125131 = EDGE_CURVE('',#125124,#125132,#125134,.T.); +#125132 = VERTEX_POINT('',#125133); +#125133 = CARTESIAN_POINT('',(90.501873,-133.279171,1.585)); +#125134 = LINE('',#125135,#125136); +#125135 = CARTESIAN_POINT('',(90.352459,-133.484619,1.585)); +#125136 = VECTOR('',#125137,1.); +#125137 = DIRECTION('',(0.58816467583,0.808741191053,0.)); +#125138 = ORIENTED_EDGE('',*,*,#125139,.T.); +#125139 = EDGE_CURVE('',#125132,#125140,#125142,.T.); +#125140 = VERTEX_POINT('',#125141); +#125141 = CARTESIAN_POINT('',(90.894094,-132.886954,1.585)); +#125142 = LINE('',#125143,#125144); +#125143 = CARTESIAN_POINT('',(90.501873,-133.279171,1.585)); +#125144 = VECTOR('',#125145,1.); +#125145 = DIRECTION('',(0.707110386851,0.707103175504,0.)); +#125146 = ORIENTED_EDGE('',*,*,#125147,.T.); +#125147 = EDGE_CURVE('',#125140,#125148,#125150,.T.); +#125148 = VERTEX_POINT('',#125149); +#125149 = CARTESIAN_POINT('',(90.950119,-132.868274,1.585)); +#125150 = LINE('',#125151,#125152); +#125151 = CARTESIAN_POINT('',(90.894094,-132.886954,1.585)); +#125152 = VECTOR('',#125153,1.); +#125153 = DIRECTION('',(0.94865789585,0.316303962418,0.)); +#125154 = ORIENTED_EDGE('',*,*,#125155,.T.); +#125155 = EDGE_CURVE('',#125148,#125156,#125158,.T.); +#125156 = VERTEX_POINT('',#125157); +#125157 = CARTESIAN_POINT('',(91.323667,-132.588113,1.585)); +#125158 = LINE('',#125159,#125160); +#125159 = CARTESIAN_POINT('',(90.950119,-132.868274,1.585)); +#125160 = VECTOR('',#125161,1.); +#125161 = DIRECTION('',(0.8,0.6,0.)); +#125162 = ORIENTED_EDGE('',*,*,#125163,.T.); +#125163 = EDGE_CURVE('',#125156,#125164,#125166,.T.); +#125164 = VERTEX_POINT('',#125165); +#125165 = CARTESIAN_POINT('',(91.566467,-132.457378,1.585)); +#125166 = LINE('',#125167,#125168); +#125167 = CARTESIAN_POINT('',(91.323667,-132.588113,1.585)); +#125168 = VECTOR('',#125169,1.); +#125169 = DIRECTION('',(0.880476339769,0.474090091762,0.)); +#125170 = ORIENTED_EDGE('',*,*,#125171,.T.); +#125171 = EDGE_CURVE('',#125164,#125172,#125174,.T.); +#125172 = VERTEX_POINT('',#125173); +#125173 = CARTESIAN_POINT('',(91.902653,-132.326634,1.585)); +#125174 = LINE('',#125175,#125176); +#125175 = CARTESIAN_POINT('',(91.566467,-132.457378,1.585)); +#125176 = VECTOR('',#125177,1.); +#125177 = DIRECTION('',(0.931999989069,0.362458301568,0.)); +#125178 = ORIENTED_EDGE('',*,*,#125179,.T.); +#125179 = EDGE_CURVE('',#125172,#125180,#125182,.T.); +#125180 = VERTEX_POINT('',#125181); +#125181 = CARTESIAN_POINT('',(92.033399,-132.307961,1.585)); +#125182 = LINE('',#125183,#125184); +#125183 = CARTESIAN_POINT('',(91.902653,-132.326634,1.585)); +#125184 = VECTOR('',#125185,1.); +#125185 = DIRECTION('',(0.989954793077,0.141384255359,0.)); +#125186 = ORIENTED_EDGE('',*,*,#125187,.T.); +#125187 = EDGE_CURVE('',#125180,#125188,#125190,.T.); +#125188 = VERTEX_POINT('',#125189); +#125189 = CARTESIAN_POINT('',(92.182816,-132.25193,1.585)); +#125190 = LINE('',#125191,#125192); +#125191 = CARTESIAN_POINT('',(92.033399,-132.307961,1.585)); +#125192 = VECTOR('',#125193,1.); +#125193 = DIRECTION('',(0.936329950156,0.35112138135,0.)); +#125194 = ORIENTED_EDGE('',*,*,#125195,.T.); +#125195 = EDGE_CURVE('',#125188,#124642,#125196,.T.); +#125196 = LINE('',#125197,#125198); +#125197 = CARTESIAN_POINT('',(92.182816,-132.25193,1.585)); +#125198 = VECTOR('',#125199,1.); +#125199 = DIRECTION('',(0.99624153669,8.66187079899E-02,0.)); +#125200 = FACE_BOUND('',#125201,.F.); +#125201 = EDGE_LOOP('',(#125202,#125212,#125220,#125228,#125236,#125244, + #125252,#125260,#125268,#125276,#125284,#125292,#125300,#125308, + #125316,#125324,#125332,#125340,#125348,#125356,#125364,#125372, + #125380,#125388,#125396,#125404,#125412,#125420,#125428,#125436, + #125444,#125452,#125460,#125468,#125476,#125484,#125492,#125500, + #125508,#125516,#125524,#125532,#125540,#125548,#125556,#125564, + #125572,#125580,#125588,#125596,#125604,#125612,#125620,#125628, + #125636,#125644,#125652,#125660,#125668)); +#125202 = ORIENTED_EDGE('',*,*,#125203,.T.); +#125203 = EDGE_CURVE('',#125204,#125206,#125208,.T.); +#125204 = VERTEX_POINT('',#125205); +#125205 = CARTESIAN_POINT('',(93.097996,-132.60679,1.585)); +#125206 = VERTEX_POINT('',#125207); +#125207 = CARTESIAN_POINT('',(93.079318,-132.588113,1.585)); +#125208 = LINE('',#125209,#125210); +#125209 = CARTESIAN_POINT('',(93.097996,-132.60679,1.585)); +#125210 = VECTOR('',#125211,1.); +#125211 = DIRECTION('',(-0.707125710308,0.707087851559,0.)); +#125212 = ORIENTED_EDGE('',*,*,#125213,.T.); +#125213 = EDGE_CURVE('',#125206,#125214,#125216,.T.); +#125214 = VERTEX_POINT('',#125215); +#125215 = CARTESIAN_POINT('',(92.612384,-132.588113,1.585)); +#125216 = LINE('',#125217,#125218); +#125217 = CARTESIAN_POINT('',(93.079318,-132.588113,1.585)); +#125218 = VECTOR('',#125219,1.); +#125219 = DIRECTION('',(-1.,0.,0.)); +#125220 = ORIENTED_EDGE('',*,*,#125221,.T.); +#125221 = EDGE_CURVE('',#125214,#125222,#125224,.T.); +#125222 = VERTEX_POINT('',#125223); +#125223 = CARTESIAN_POINT('',(92.593719,-132.60679,1.585)); +#125224 = LINE('',#125225,#125226); +#125225 = CARTESIAN_POINT('',(92.612384,-132.588113,1.585)); +#125226 = VECTOR('',#125227,1.); +#125227 = DIRECTION('',(-0.706879513115,-0.707333976236,0.)); +#125228 = ORIENTED_EDGE('',*,*,#125229,.T.); +#125229 = EDGE_CURVE('',#125222,#125230,#125232,.T.); +#125230 = VERTEX_POINT('',#125231); +#125231 = CARTESIAN_POINT('',(92.294879,-132.625472,1.585)); +#125232 = LINE('',#125233,#125234); +#125233 = CARTESIAN_POINT('',(92.593719,-132.60679,1.585)); +#125234 = VECTOR('',#125235,1.); +#125235 = DIRECTION('',(-0.99805164272,-6.239325655638E-02,0.)); +#125236 = ORIENTED_EDGE('',*,*,#125237,.T.); +#125237 = EDGE_CURVE('',#125230,#125238,#125240,.T.); +#125238 = VERTEX_POINT('',#125239); +#125239 = CARTESIAN_POINT('',(92.014717,-132.718852,1.585)); +#125240 = LINE('',#125241,#125242); +#125241 = CARTESIAN_POINT('',(92.294879,-132.625472,1.585)); +#125242 = VECTOR('',#125243,1.); +#125243 = DIRECTION('',(-0.948690747476,-0.316205416863,0.)); +#125244 = ORIENTED_EDGE('',*,*,#125245,.T.); +#125245 = EDGE_CURVE('',#125238,#125246,#125248,.T.); +#125246 = VERTEX_POINT('',#125247); +#125247 = CARTESIAN_POINT('',(91.958697,-132.718852,1.585)); +#125248 = LINE('',#125249,#125250); +#125249 = CARTESIAN_POINT('',(92.014717,-132.718852,1.585)); +#125250 = VECTOR('',#125251,1.); +#125251 = DIRECTION('',(-1.,0.,0.)); +#125252 = ORIENTED_EDGE('',*,*,#125253,.T.); +#125253 = EDGE_CURVE('',#125246,#125254,#125256,.T.); +#125254 = VERTEX_POINT('',#125255); +#125255 = CARTESIAN_POINT('',(91.547794,-132.905632,1.585)); +#125256 = LINE('',#125257,#125258); +#125257 = CARTESIAN_POINT('',(91.958697,-132.718852,1.585)); +#125258 = VECTOR('',#125259,1.); +#125259 = DIRECTION('',(-0.910361545602,-0.413813794223,0.)); +#125260 = ORIENTED_EDGE('',*,*,#125261,.T.); +#125261 = EDGE_CURVE('',#125254,#125262,#125264,.T.); +#125262 = VERTEX_POINT('',#125263); +#125263 = CARTESIAN_POINT('',(91.510437,-132.942983,1.585)); +#125264 = LINE('',#125265,#125266); +#125265 = CARTESIAN_POINT('',(91.547794,-132.905632,1.585)); +#125266 = VECTOR('',#125267,1.); +#125267 = DIRECTION('',(-0.707163568549,-0.707049989263,0.)); +#125268 = ORIENTED_EDGE('',*,*,#125269,.T.); +#125269 = EDGE_CURVE('',#125262,#125270,#125272,.T.); +#125270 = VERTEX_POINT('',#125271); +#125271 = CARTESIAN_POINT('',(91.473085,-132.942983,1.585)); +#125272 = LINE('',#125273,#125274); +#125273 = CARTESIAN_POINT('',(91.510437,-132.942983,1.585)); +#125274 = VECTOR('',#125275,1.); +#125275 = DIRECTION('',(-1.,0.,0.)); +#125276 = ORIENTED_EDGE('',*,*,#125277,.T.); +#125277 = EDGE_CURVE('',#125270,#125278,#125280,.T.); +#125278 = VERTEX_POINT('',#125279); +#125279 = CARTESIAN_POINT('',(91.155569,-133.167111,1.585)); +#125280 = LINE('',#125281,#125282); +#125281 = CARTESIAN_POINT('',(91.473085,-132.942983,1.585)); +#125282 = VECTOR('',#125283,1.); +#125283 = DIRECTION('',(-0.816969004178,-0.576681581301,0.)); +#125284 = ORIENTED_EDGE('',*,*,#125285,.T.); +#125285 = EDGE_CURVE('',#125278,#125286,#125288,.T.); +#125286 = VERTEX_POINT('',#125287); +#125287 = CARTESIAN_POINT('',(90.763354,-133.559325,1.585)); +#125288 = LINE('',#125289,#125290); +#125289 = CARTESIAN_POINT('',(91.155569,-133.167111,1.585)); +#125290 = VECTOR('',#125291,1.); +#125291 = DIRECTION('',(-0.707107682615,-0.707105879757,0.)); +#125292 = ORIENTED_EDGE('',*,*,#125293,.T.); +#125293 = EDGE_CURVE('',#125286,#125294,#125296,.T.); +#125294 = VERTEX_POINT('',#125295); +#125295 = CARTESIAN_POINT('',(90.557902,-133.85816,1.585)); +#125296 = LINE('',#125297,#125298); +#125297 = CARTESIAN_POINT('',(90.763354,-133.559325,1.585)); +#125298 = VECTOR('',#125299,1.); +#125299 = DIRECTION('',(-0.56653432325,-0.824038142673,0.)); +#125300 = ORIENTED_EDGE('',*,*,#125301,.T.); +#125301 = EDGE_CURVE('',#125294,#125302,#125304,.T.); +#125302 = VERTEX_POINT('',#125303); +#125303 = CARTESIAN_POINT('',(90.333771,-134.381125,1.585)); +#125304 = LINE('',#125305,#125306); +#125305 = CARTESIAN_POINT('',(90.557902,-133.85816,1.585)); +#125306 = VECTOR('',#125307,1.); +#125307 = DIRECTION('',(-0.393923965202,-0.919143030023,0.)); +#125308 = ORIENTED_EDGE('',*,*,#125309,.T.); +#125309 = EDGE_CURVE('',#125302,#125310,#125312,.T.); +#125310 = VERTEX_POINT('',#125311); +#125311 = CARTESIAN_POINT('',(90.240387,-134.848052,1.585)); +#125312 = LINE('',#125313,#125314); +#125313 = CARTESIAN_POINT('',(90.333771,-134.381125,1.585)); +#125314 = VECTOR('',#125315,1.); +#125315 = DIRECTION('',(-0.196113308115,-0.980581241091,0.)); +#125316 = ORIENTED_EDGE('',*,*,#125317,.T.); +#125317 = EDGE_CURVE('',#125310,#125318,#125320,.T.); +#125318 = VERTEX_POINT('',#125319); +#125319 = CARTESIAN_POINT('',(90.221713,-135.221594,1.585)); +#125320 = LINE('',#125321,#125322); +#125321 = CARTESIAN_POINT('',(90.240387,-134.848052,1.585)); +#125322 = VECTOR('',#125323,1.); +#125323 = DIRECTION('',(-4.992934902988E-02,-0.998752752239,0.)); +#125324 = ORIENTED_EDGE('',*,*,#125325,.T.); +#125325 = EDGE_CURVE('',#125318,#125326,#125328,.T.); +#125326 = VERTEX_POINT('',#125327); +#125327 = CARTESIAN_POINT('',(90.240387,-135.240275,1.585)); +#125328 = LINE('',#125329,#125330); +#125329 = CARTESIAN_POINT('',(90.221713,-135.221594,1.585)); +#125330 = VECTOR('',#125331,1.); +#125331 = DIRECTION('',(0.706974263153,-0.70723927439,0.)); +#125332 = ORIENTED_EDGE('',*,*,#125333,.T.); +#125333 = EDGE_CURVE('',#125326,#125334,#125336,.T.); +#125334 = VERTEX_POINT('',#125335); +#125335 = CARTESIAN_POINT('',(90.240387,-135.483078,1.585)); +#125336 = LINE('',#125337,#125338); +#125337 = CARTESIAN_POINT('',(90.240387,-135.240275,1.585)); +#125338 = VECTOR('',#125339,1.); +#125339 = DIRECTION('',(0.,-1.,0.)); +#125340 = ORIENTED_EDGE('',*,*,#125341,.T.); +#125341 = EDGE_CURVE('',#125334,#125342,#125344,.T.); +#125342 = VERTEX_POINT('',#125343); +#125343 = CARTESIAN_POINT('',(90.259066,-135.501753,1.585)); +#125344 = LINE('',#125345,#125346); +#125345 = CARTESIAN_POINT('',(90.240387,-135.483078,1.585)); +#125346 = VECTOR('',#125347,1.); +#125347 = DIRECTION('',(0.707182496657,-0.707031057608,0.)); +#125348 = ORIENTED_EDGE('',*,*,#125349,.T.); +#125349 = EDGE_CURVE('',#125342,#125350,#125352,.T.); +#125350 = VERTEX_POINT('',#125351); +#125351 = CARTESIAN_POINT('',(90.259066,-135.613822,1.585)); +#125352 = LINE('',#125353,#125354); +#125353 = CARTESIAN_POINT('',(90.259066,-135.501753,1.585)); +#125354 = VECTOR('',#125355,1.); +#125355 = DIRECTION('',(0.,-1.,0.)); +#125356 = ORIENTED_EDGE('',*,*,#125357,.T.); +#125357 = EDGE_CURVE('',#125350,#125358,#125360,.T.); +#125358 = VERTEX_POINT('',#125359); +#125359 = CARTESIAN_POINT('',(90.315108,-135.893978,1.585)); +#125360 = LINE('',#125361,#125362); +#125361 = CARTESIAN_POINT('',(90.259066,-135.613822,1.585)); +#125362 = VECTOR('',#125363,1.); +#125363 = DIRECTION('',(0.196152482173,-0.980573405583,0.)); +#125364 = ORIENTED_EDGE('',*,*,#125365,.T.); +#125365 = EDGE_CURVE('',#125358,#125366,#125368,.T.); +#125366 = VERTEX_POINT('',#125367); +#125367 = CARTESIAN_POINT('',(90.539227,-136.472964,1.585)); +#125368 = LINE('',#125369,#125370); +#125369 = CARTESIAN_POINT('',(90.315108,-135.893978,1.585)); +#125370 = VECTOR('',#125371,1.); +#125371 = DIRECTION('',(0.360987640815,-0.932570599568,0.)); +#125372 = ORIENTED_EDGE('',*,*,#125373,.T.); +#125373 = EDGE_CURVE('',#125366,#125374,#125376,.T.); +#125374 = VERTEX_POINT('',#125375); +#125375 = CARTESIAN_POINT('',(90.782029,-136.827839,1.585)); +#125376 = LINE('',#125377,#125378); +#125377 = CARTESIAN_POINT('',(90.539227,-136.472964,1.585)); +#125378 = VECTOR('',#125379,1.); +#125379 = DIRECTION('',(0.564672493524,-0.825315076233,0.)); +#125380 = ORIENTED_EDGE('',*,*,#125381,.T.); +#125381 = EDGE_CURVE('',#125374,#125382,#125384,.T.); +#125382 = VERTEX_POINT('',#125383); +#125383 = CARTESIAN_POINT('',(91.099545,-137.164009,1.585)); +#125384 = LINE('',#125385,#125386); +#125385 = CARTESIAN_POINT('',(90.782029,-136.827839,1.585)); +#125386 = VECTOR('',#125387,1.); +#125387 = DIRECTION('',(0.686648805977,-0.726989282762,0.)); +#125388 = ORIENTED_EDGE('',*,*,#125389,.T.); +#125389 = EDGE_CURVE('',#125382,#125390,#125392,.T.); +#125390 = VERTEX_POINT('',#125391); +#125391 = CARTESIAN_POINT('',(91.454403,-137.425499,1.585)); +#125392 = LINE('',#125393,#125394); +#125393 = CARTESIAN_POINT('',(91.099545,-137.164009,1.585)); +#125394 = VECTOR('',#125395,1.); +#125395 = DIRECTION('',(0.805038844755,-0.593222098741,0.)); +#125396 = ORIENTED_EDGE('',*,*,#125397,.T.); +#125397 = EDGE_CURVE('',#125390,#125398,#125400,.T.); +#125398 = VERTEX_POINT('',#125399); +#125399 = CARTESIAN_POINT('',(91.491761,-137.425499,1.585)); +#125400 = LINE('',#125401,#125402); +#125401 = CARTESIAN_POINT('',(91.454403,-137.425499,1.585)); +#125402 = VECTOR('',#125403,1.); +#125403 = DIRECTION('',(1.,0.,0.)); +#125404 = ORIENTED_EDGE('',*,*,#125405,.T.); +#125405 = EDGE_CURVE('',#125398,#125406,#125408,.T.); +#125406 = VERTEX_POINT('',#125407); +#125407 = CARTESIAN_POINT('',(91.659854,-137.537562,1.585)); +#125408 = LINE('',#125409,#125410); +#125409 = CARTESIAN_POINT('',(91.491761,-137.425499,1.585)); +#125410 = VECTOR('',#125411,1.); +#125411 = DIRECTION('',(0.832048009749,-0.554703623093,0.)); +#125412 = ORIENTED_EDGE('',*,*,#125413,.T.); +#125413 = EDGE_CURVE('',#125406,#125414,#125416,.T.); +#125414 = VERTEX_POINT('',#125415); +#125415 = CARTESIAN_POINT('',(91.958697,-137.668304,1.585)); +#125416 = LINE('',#125417,#125418); +#125417 = CARTESIAN_POINT('',(91.659854,-137.537562,1.585)); +#125418 = VECTOR('',#125419,1.); +#125419 = DIRECTION('',(0.916159375332,-0.400814170148,0.)); +#125420 = ORIENTED_EDGE('',*,*,#125421,.T.); +#125421 = EDGE_CURVE('',#125414,#125422,#125424,.T.); +#125422 = VERTEX_POINT('',#125423); +#125423 = CARTESIAN_POINT('',(92.014717,-137.668304,1.585)); +#125424 = LINE('',#125425,#125426); +#125425 = CARTESIAN_POINT('',(91.958697,-137.668304,1.585)); +#125426 = VECTOR('',#125427,1.); +#125427 = DIRECTION('',(1.,0.,0.)); +#125428 = ORIENTED_EDGE('',*,*,#125429,.T.); +#125429 = EDGE_CURVE('',#125422,#125430,#125432,.T.); +#125430 = VERTEX_POINT('',#125431); +#125431 = CARTESIAN_POINT('',(92.276201,-137.761686,1.585)); +#125432 = LINE('',#125433,#125434); +#125433 = CARTESIAN_POINT('',(92.014717,-137.668304,1.585)); +#125434 = VECTOR('',#125435,1.); +#125435 = DIRECTION('',(0.94174777823,-0.336319969966,0.)); +#125436 = ORIENTED_EDGE('',*,*,#125437,.T.); +#125437 = EDGE_CURVE('',#125430,#125438,#125440,.T.); +#125438 = VERTEX_POINT('',#125439); +#125439 = CARTESIAN_POINT('',(92.500323,-137.780364,1.585)); +#125440 = LINE('',#125441,#125442); +#125441 = CARTESIAN_POINT('',(92.276201,-137.761686,1.585)); +#125442 = VECTOR('',#125443,1.); +#125443 = DIRECTION('',(0.99654532892,-8.305063159155E-02,0.)); +#125444 = ORIENTED_EDGE('',*,*,#125445,.T.); +#125445 = EDGE_CURVE('',#125438,#125446,#125448,.T.); +#125446 = VERTEX_POINT('',#125447); +#125447 = CARTESIAN_POINT('',(92.518998,-137.799046,1.585)); +#125448 = LINE('',#125449,#125450); +#125449 = CARTESIAN_POINT('',(92.500323,-137.780364,1.585)); +#125450 = VECTOR('',#125451,1.); +#125451 = DIRECTION('',(0.706974270248,-0.707239267297,0.)); +#125452 = ORIENTED_EDGE('',*,*,#125453,.T.); +#125453 = EDGE_CURVE('',#125446,#125454,#125456,.T.); +#125454 = VERTEX_POINT('',#125455); +#125455 = CARTESIAN_POINT('',(93.004606,-137.817723,1.585)); +#125456 = LINE('',#125457,#125458); +#125457 = CARTESIAN_POINT('',(92.518998,-137.799046,1.585)); +#125458 = VECTOR('',#125459,1.); +#125459 = DIRECTION('',(0.999261192868,-3.84326479366E-02,0.)); +#125460 = ORIENTED_EDGE('',*,*,#125461,.T.); +#125461 = EDGE_CURVE('',#125454,#125462,#125464,.T.); +#125462 = VERTEX_POINT('',#125463); +#125463 = CARTESIAN_POINT('',(93.023288,-137.799046,1.585)); +#125464 = LINE('',#125465,#125466); +#125465 = CARTESIAN_POINT('',(93.004606,-137.817723,1.585)); +#125466 = VECTOR('',#125467,1.); +#125467 = DIRECTION('',(0.707201411591,0.707012138116,0.)); +#125468 = ORIENTED_EDGE('',*,*,#125469,.T.); +#125469 = EDGE_CURVE('',#125462,#125470,#125472,.T.); +#125470 = VERTEX_POINT('',#125471); +#125471 = CARTESIAN_POINT('',(93.191377,-137.799046,1.585)); +#125472 = LINE('',#125473,#125474); +#125473 = CARTESIAN_POINT('',(93.023288,-137.799046,1.585)); +#125474 = VECTOR('',#125475,1.); +#125475 = DIRECTION('',(1.,0.,0.)); +#125476 = ORIENTED_EDGE('',*,*,#125477,.T.); +#125477 = EDGE_CURVE('',#125470,#125478,#125480,.T.); +#125478 = VERTEX_POINT('',#125479); +#125479 = CARTESIAN_POINT('',(93.41551,-137.743011,1.585)); +#125480 = LINE('',#125481,#125482); +#125481 = CARTESIAN_POINT('',(93.191377,-137.799046,1.585)); +#125482 = VECTOR('',#125483,1.); +#125483 = DIRECTION('',(0.97014071783,0.242542754185,0.)); +#125484 = ORIENTED_EDGE('',*,*,#125485,.T.); +#125485 = EDGE_CURVE('',#125478,#125486,#125488,.T.); +#125486 = VERTEX_POINT('',#125487); +#125487 = CARTESIAN_POINT('',(93.508893,-137.743011,1.585)); +#125488 = LINE('',#125489,#125490); +#125489 = CARTESIAN_POINT('',(93.41551,-137.743011,1.585)); +#125490 = VECTOR('',#125491,1.); +#125491 = DIRECTION('',(1.,0.,0.)); +#125492 = ORIENTED_EDGE('',*,*,#125493,.T.); +#125493 = EDGE_CURVE('',#125486,#125494,#125496,.T.); +#125494 = VERTEX_POINT('',#125495); +#125495 = CARTESIAN_POINT('',(93.882437,-137.612273,1.585)); +#125496 = LINE('',#125497,#125498); +#125497 = CARTESIAN_POINT('',(93.508893,-137.743011,1.585)); +#125498 = VECTOR('',#125499,1.); +#125499 = DIRECTION('',(0.943860247208,0.330345022272,0.)); +#125500 = ORIENTED_EDGE('',*,*,#125501,.T.); +#125501 = EDGE_CURVE('',#125494,#125502,#125504,.T.); +#125502 = VERTEX_POINT('',#125503); +#125503 = CARTESIAN_POINT('',(94.181275,-137.462853,1.585)); +#125504 = LINE('',#125505,#125506); +#125505 = CARTESIAN_POINT('',(93.882437,-137.612273,1.585)); +#125506 = VECTOR('',#125507,1.); +#125507 = DIRECTION('',(0.894425993792,0.447215989909,0.)); +#125508 = ORIENTED_EDGE('',*,*,#125509,.T.); +#125509 = EDGE_CURVE('',#125502,#125510,#125512,.T.); +#125510 = VERTEX_POINT('',#125511); +#125511 = CARTESIAN_POINT('',(94.442748,-137.294755,1.585)); +#125512 = LINE('',#125513,#125514); +#125513 = CARTESIAN_POINT('',(94.181275,-137.462853,1.585)); +#125514 = VECTOR('',#125515,1.); +#125515 = DIRECTION('',(0.841166454859,0.54077628944,0.)); +#125516 = ORIENTED_EDGE('',*,*,#125517,.T.); +#125517 = EDGE_CURVE('',#125510,#125518,#125520,.T.); +#125518 = VERTEX_POINT('',#125519); +#125519 = CARTESIAN_POINT('',(94.778942,-136.97725,1.585)); +#125520 = LINE('',#125521,#125522); +#125521 = CARTESIAN_POINT('',(94.442748,-137.294755,1.585)); +#125522 = VECTOR('',#125523,1.); +#125523 = DIRECTION('',(0.727025626597,0.686610324909,0.)); +#125524 = ORIENTED_EDGE('',*,*,#125525,.T.); +#125525 = EDGE_CURVE('',#125518,#125526,#125528,.T.); +#125526 = VERTEX_POINT('',#125527); +#125527 = CARTESIAN_POINT('',(95.115125,-136.566352,1.585)); +#125528 = LINE('',#125529,#125530); +#125529 = CARTESIAN_POINT('',(94.778942,-136.97725,1.585)); +#125530 = VECTOR('',#125531,1.); +#125531 = DIRECTION('',(0.633230712784,0.773963089809,0.)); +#125532 = ORIENTED_EDGE('',*,*,#125533,.T.); +#125533 = EDGE_CURVE('',#125526,#125534,#125536,.T.); +#125534 = VERTEX_POINT('',#125535); +#125535 = CARTESIAN_POINT('',(95.376608,-136.006032,1.585)); +#125536 = LINE('',#125537,#125538); +#125537 = CARTESIAN_POINT('',(95.115125,-136.566352,1.585)); +#125538 = VECTOR('',#125539,1.); +#125539 = DIRECTION('',(0.422885908012,0.906182933411,0.)); +#125540 = ORIENTED_EDGE('',*,*,#125541,.T.); +#125541 = EDGE_CURVE('',#125534,#125542,#125544,.T.); +#125542 = VERTEX_POINT('',#125543); +#125543 = CARTESIAN_POINT('',(95.469989,-135.613822,1.585)); +#125544 = LINE('',#125545,#125546); +#125545 = CARTESIAN_POINT('',(95.376608,-136.006032,1.585)); +#125546 = VECTOR('',#125547,1.); +#125547 = DIRECTION('',(0.231615050366,0.972807518702,0.)); +#125548 = ORIENTED_EDGE('',*,*,#125549,.T.); +#125549 = EDGE_CURVE('',#125542,#125550,#125552,.T.); +#125550 = VERTEX_POINT('',#125551); +#125551 = CARTESIAN_POINT('',(95.507353,-135.072178,1.585)); +#125552 = LINE('',#125553,#125554); +#125553 = CARTESIAN_POINT('',(95.469989,-135.613822,1.585)); +#125554 = VECTOR('',#125555,1.); +#125555 = DIRECTION('',(6.88190323027E-02,0.997629159955,0.)); +#125556 = ORIENTED_EDGE('',*,*,#125557,.T.); +#125557 = EDGE_CURVE('',#125550,#125558,#125560,.T.); +#125558 = VERTEX_POINT('',#125559); +#125559 = CARTESIAN_POINT('',(95.488672,-135.053499,1.585)); +#125560 = LINE('',#125561,#125562); +#125561 = CARTESIAN_POINT('',(95.507353,-135.072178,1.585)); +#125562 = VECTOR('',#125563,1.); +#125563 = DIRECTION('',(-0.707144633855,0.707068926492,0.)); +#125564 = ORIENTED_EDGE('',*,*,#125565,.T.); +#125565 = EDGE_CURVE('',#125558,#125566,#125568,.T.); +#125566 = VERTEX_POINT('',#125567); +#125567 = CARTESIAN_POINT('',(95.469989,-134.735986,1.585)); +#125568 = LINE('',#125569,#125570); +#125569 = CARTESIAN_POINT('',(95.488672,-135.053499,1.585)); +#125570 = VECTOR('',#125571,1.); +#125571 = DIRECTION('',(-5.874008390483E-02,0.998273310543,0.)); +#125572 = ORIENTED_EDGE('',*,*,#125573,.T.); +#125573 = EDGE_CURVE('',#125566,#125574,#125576,.T.); +#125574 = VERTEX_POINT('',#125575); +#125575 = CARTESIAN_POINT('',(95.395282,-134.418485,1.585)); +#125576 = LINE('',#125577,#125578); +#125577 = CARTESIAN_POINT('',(95.469989,-134.735986,1.585)); +#125578 = VECTOR('',#125579,1.); +#125579 = DIRECTION('',(-0.229041896993,0.973416565208,0.)); +#125580 = ORIENTED_EDGE('',*,*,#125581,.T.); +#125581 = EDGE_CURVE('',#125574,#125582,#125584,.T.); +#125582 = VERTEX_POINT('',#125583); +#125583 = CARTESIAN_POINT('',(95.171161,-133.895515,1.585)); +#125584 = LINE('',#125585,#125586); +#125585 = CARTESIAN_POINT('',(95.395282,-134.418485,1.585)); +#125586 = VECTOR('',#125587,1.); +#125587 = DIRECTION('',(-0.393905935027,0.91915075714,0.)); +#125588 = ORIENTED_EDGE('',*,*,#125589,.T.); +#125589 = EDGE_CURVE('',#125582,#125590,#125592,.T.); +#125590 = VERTEX_POINT('',#125591); +#125591 = CARTESIAN_POINT('',(95.021741,-133.671394,1.585)); +#125592 = LINE('',#125593,#125594); +#125593 = CARTESIAN_POINT('',(95.171161,-133.895515,1.585)); +#125594 = VECTOR('',#125595,1.); +#125595 = DIRECTION('',(-0.554715617113,0.832040013539,0.)); +#125596 = ORIENTED_EDGE('',*,*,#125597,.T.); +#125597 = EDGE_CURVE('',#125590,#125598,#125600,.T.); +#125598 = VERTEX_POINT('',#125599); +#125599 = CARTESIAN_POINT('',(94.928354,-133.596682,1.585)); +#125600 = LINE('',#125601,#125602); +#125601 = CARTESIAN_POINT('',(95.021741,-133.671394,1.585)); +#125602 = VECTOR('',#125603,1.); +#125603 = DIRECTION('',(-0.780859020229,0.624707283876,0.)); +#125604 = ORIENTED_EDGE('',*,*,#125605,.T.); +#125605 = EDGE_CURVE('',#125598,#125606,#125608,.T.); +#125606 = VERTEX_POINT('',#125607); +#125607 = CARTESIAN_POINT('',(94.834975,-133.465945,1.585)); +#125608 = LINE('',#125609,#125610); +#125609 = CARTESIAN_POINT('',(94.928354,-133.596682,1.585)); +#125610 = VECTOR('',#125611,1.); +#125611 = DIRECTION('',(-0.581219352425,0.813746928945,0.)); +#125612 = ORIENTED_EDGE('',*,*,#125613,.T.); +#125613 = EDGE_CURVE('',#125606,#125614,#125616,.T.); +#125614 = VERTEX_POINT('',#125615); +#125615 = CARTESIAN_POINT('',(94.554817,-133.185791,1.585)); +#125616 = LINE('',#125617,#125618); +#125617 = CARTESIAN_POINT('',(94.834975,-133.465945,1.585)); +#125618 = VECTOR('',#125619,1.); +#125619 = DIRECTION('',(-0.707111829119,0.707101733218,0.)); +#125620 = ORIENTED_EDGE('',*,*,#125621,.T.); +#125621 = EDGE_CURVE('',#125614,#125622,#125624,.T.); +#125622 = VERTEX_POINT('',#125623); +#125623 = CARTESIAN_POINT('',(94.386719,-133.055045,1.585)); +#125624 = LINE('',#125625,#125626); +#125625 = CARTESIAN_POINT('',(94.554817,-133.185791,1.585)); +#125626 = VECTOR('',#125627,1.); +#125627 = DIRECTION('',(-0.789345137587,0.613949715993,0.)); +#125628 = ORIENTED_EDGE('',*,*,#125629,.T.); +#125629 = EDGE_CURVE('',#125622,#125630,#125632,.T.); +#125630 = VERTEX_POINT('',#125631); +#125631 = CARTESIAN_POINT('',(94.349367,-133.055045,1.585)); +#125632 = LINE('',#125633,#125634); +#125633 = CARTESIAN_POINT('',(94.386719,-133.055045,1.585)); +#125634 = VECTOR('',#125635,1.); +#125635 = DIRECTION('',(-1.,0.,0.)); +#125636 = ORIENTED_EDGE('',*,*,#125637,.T.); +#125637 = EDGE_CURVE('',#125630,#125638,#125640,.T.); +#125638 = VERTEX_POINT('',#125639); +#125639 = CARTESIAN_POINT('',(94.162597,-132.924307,1.585)); +#125640 = LINE('',#125641,#125642); +#125641 = CARTESIAN_POINT('',(94.349367,-133.055045,1.585)); +#125642 = VECTOR('',#125643,1.); +#125643 = DIRECTION('',(-0.819233981203,0.573459400517,0.)); +#125644 = ORIENTED_EDGE('',*,*,#125645,.T.); +#125645 = EDGE_CURVE('',#125638,#125646,#125648,.T.); +#125646 = VERTEX_POINT('',#125647); +#125647 = CARTESIAN_POINT('',(93.901114,-132.793563,1.585)); +#125648 = LINE('',#125649,#125650); +#125649 = CARTESIAN_POINT('',(94.162597,-132.924307,1.585)); +#125650 = VECTOR('',#125651,1.); +#125651 = DIRECTION('',(-0.894423770393,0.447220436649,0.)); +#125652 = ORIENTED_EDGE('',*,*,#125653,.T.); +#125653 = EDGE_CURVE('',#125646,#125654,#125656,.T.); +#125654 = VERTEX_POINT('',#125655); +#125655 = CARTESIAN_POINT('',(93.583599,-132.681506,1.585)); +#125656 = LINE('',#125657,#125658); +#125657 = CARTESIAN_POINT('',(93.901114,-132.793563,1.585)); +#125658 = VECTOR('',#125659,1.); +#125659 = DIRECTION('',(-0.94299696776,0.332801320304,0.)); +#125660 = ORIENTED_EDGE('',*,*,#125661,.T.); +#125661 = EDGE_CURVE('',#125654,#125662,#125664,.T.); +#125662 = VERTEX_POINT('',#125663); +#125663 = CARTESIAN_POINT('',(93.228736,-132.60679,1.585)); +#125664 = LINE('',#125665,#125666); +#125665 = CARTESIAN_POINT('',(93.583599,-132.681506,1.585)); +#125666 = VECTOR('',#125667,1.); +#125667 = DIRECTION('',(-0.978545337602,0.206031604998,0.)); +#125668 = ORIENTED_EDGE('',*,*,#125669,.T.); +#125669 = EDGE_CURVE('',#125662,#125204,#125670,.T.); +#125670 = LINE('',#125671,#125672); +#125671 = CARTESIAN_POINT('',(93.228736,-132.60679,1.585)); +#125672 = VECTOR('',#125673,1.); +#125673 = DIRECTION('',(-1.,0.,0.)); +#125674 = PLANE('',#125675); +#125675 = AXIS2_PLACEMENT_3D('',#125676,#125677,#125678); +#125676 = CARTESIAN_POINT('',(0.,0.,1.585)); +#125677 = DIRECTION('',(0.,0.,1.)); +#125678 = DIRECTION('',(1.,0.,-0.)); +#125679 = SHELL_BASED_SURFACE_MODEL('',(#125680)); +#125680 = OPEN_SHELL('',(#125681)); +#125681 = ADVANCED_FACE('',(#125682,#125927),#125995,.T.); +#125682 = FACE_BOUND('',#125683,.F.); +#125683 = EDGE_LOOP('',(#125684,#125694,#125702,#125710,#125718,#125726, + #125735,#125743,#125751,#125759,#125767,#125775,#125783,#125791, + #125799,#125808,#125816,#125824,#125833,#125841,#125849,#125857, + #125865,#125873,#125881,#125889,#125897,#125905,#125913,#125921)); +#125684 = ORIENTED_EDGE('',*,*,#125685,.T.); +#125685 = EDGE_CURVE('',#125686,#125688,#125690,.T.); +#125686 = VERTEX_POINT('',#125687); +#125687 = CARTESIAN_POINT('',(121.696883,-136.186441,1.585)); +#125688 = VERTEX_POINT('',#125689); +#125689 = CARTESIAN_POINT('',(121.85692,-136.107484,1.585)); +#125690 = LINE('',#125691,#125692); +#125691 = CARTESIAN_POINT('',(121.696883,-136.186441,1.585)); +#125692 = VECTOR('',#125693,1.); +#125693 = DIRECTION('',(0.89679384866,0.442448633183,0.)); +#125694 = ORIENTED_EDGE('',*,*,#125695,.T.); +#125695 = EDGE_CURVE('',#125688,#125696,#125698,.T.); +#125696 = VERTEX_POINT('',#125697); +#125697 = CARTESIAN_POINT('',(121.883333,-136.103933,1.585)); +#125698 = LINE('',#125699,#125700); +#125699 = CARTESIAN_POINT('',(121.85692,-136.107484,1.585)); +#125700 = VECTOR('',#125701,1.); +#125701 = DIRECTION('',(0.991083449634,0.133242620287,0.)); +#125702 = ORIENTED_EDGE('',*,*,#125703,.T.); +#125703 = EDGE_CURVE('',#125696,#125704,#125706,.T.); +#125704 = VERTEX_POINT('',#125705); +#125705 = CARTESIAN_POINT('',(122.169509,-136.105854,1.585)); +#125706 = LINE('',#125707,#125708); +#125707 = CARTESIAN_POINT('',(121.883333,-136.103933,1.585)); +#125708 = VECTOR('',#125709,1.); +#125709 = DIRECTION('',(0.999977470911,-6.712501123786E-03,0.)); +#125710 = ORIENTED_EDGE('',*,*,#125711,.T.); +#125711 = EDGE_CURVE('',#125704,#125712,#125714,.T.); +#125712 = VERTEX_POINT('',#125713); +#125713 = CARTESIAN_POINT('',(122.220955,-136.127606,1.585)); +#125714 = LINE('',#125715,#125716); +#125715 = CARTESIAN_POINT('',(122.169509,-136.105854,1.585)); +#125716 = VECTOR('',#125717,1.); +#125717 = DIRECTION('',(0.92105470034,-0.389433227885,0.)); +#125718 = ORIENTED_EDGE('',*,*,#125719,.T.); +#125719 = EDGE_CURVE('',#125712,#125720,#125722,.T.); +#125720 = VERTEX_POINT('',#125721); +#125721 = CARTESIAN_POINT('',(122.263824,-136.105854,1.585)); +#125722 = LINE('',#125723,#125724); +#125723 = CARTESIAN_POINT('',(122.220955,-136.127606,1.585)); +#125724 = VECTOR('',#125725,1.); +#125725 = DIRECTION('',(0.891769704191,0.45248955202,0.)); +#125726 = ORIENTED_EDGE('',*,*,#125727,.T.); +#125727 = EDGE_CURVE('',#125720,#125728,#125730,.T.); +#125728 = VERTEX_POINT('',#125729); +#125729 = CARTESIAN_POINT('',(122.381412,-136.184424,1.585)); +#125730 = CIRCLE('',#125731,0.100001512409); +#125731 = AXIS2_PLACEMENT_3D('',#125732,#125733,#125734); +#125732 = CARTESIAN_POINT('',(122.28333217046,-136.2039342414,1.585)); +#125733 = DIRECTION('',(0.,0.,-1.)); +#125734 = DIRECTION('',(-0.195078754268,0.9807875813,0.)); +#125735 = ORIENTED_EDGE('',*,*,#125736,.T.); +#125736 = EDGE_CURVE('',#125728,#125737,#125739,.T.); +#125737 = VERTEX_POINT('',#125738); +#125738 = CARTESIAN_POINT('',(122.381412,-137.356775,1.585)); +#125739 = LINE('',#125740,#125741); +#125740 = CARTESIAN_POINT('',(122.381412,-136.184424,1.585)); +#125741 = VECTOR('',#125742,1.); +#125742 = DIRECTION('',(0.,-1.,0.)); +#125743 = ORIENTED_EDGE('',*,*,#125744,.T.); +#125744 = EDGE_CURVE('',#125737,#125745,#125747,.T.); +#125745 = VERTEX_POINT('',#125746); +#125746 = CARTESIAN_POINT('',(122.372776,-137.381987,1.585)); +#125747 = LINE('',#125748,#125749); +#125748 = CARTESIAN_POINT('',(122.381412,-137.356775,1.585)); +#125749 = VECTOR('',#125750,1.); +#125750 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#125751 = ORIENTED_EDGE('',*,*,#125752,.T.); +#125752 = EDGE_CURVE('',#125745,#125753,#125755,.T.); +#125753 = VERTEX_POINT('',#125754); +#125754 = CARTESIAN_POINT('',(122.293668,-137.533644,1.585)); +#125755 = LINE('',#125756,#125757); +#125756 = CARTESIAN_POINT('',(122.372776,-137.381987,1.585)); +#125757 = VECTOR('',#125758,1.); +#125758 = DIRECTION('',(-0.462486085634,-0.886626539528,0.)); +#125759 = ORIENTED_EDGE('',*,*,#125760,.T.); +#125760 = EDGE_CURVE('',#125753,#125761,#125763,.T.); +#125761 = VERTEX_POINT('',#125762); +#125762 = CARTESIAN_POINT('',(122.203119,-137.621422,1.585)); +#125763 = LINE('',#125764,#125765); +#125764 = CARTESIAN_POINT('',(122.293668,-137.533644,1.585)); +#125765 = VECTOR('',#125766,1.); +#125766 = DIRECTION('',(-0.718007742681,-0.696035115098,0.)); +#125767 = ORIENTED_EDGE('',*,*,#125768,.T.); +#125768 = EDGE_CURVE('',#125761,#125769,#125771,.T.); +#125769 = VERTEX_POINT('',#125770); +#125770 = CARTESIAN_POINT('',(122.043079,-137.700382,1.585)); +#125771 = LINE('',#125772,#125773); +#125772 = CARTESIAN_POINT('',(122.203119,-137.621422,1.585)); +#125773 = VECTOR('',#125774,1.); +#125774 = DIRECTION('',(-0.896790469289,-0.442455482724,0.)); +#125775 = ORIENTED_EDGE('',*,*,#125776,.T.); +#125776 = EDGE_CURVE('',#125769,#125777,#125779,.T.); +#125777 = VERTEX_POINT('',#125778); +#125778 = CARTESIAN_POINT('',(122.016666,-137.703933,1.585)); +#125779 = LINE('',#125780,#125781); +#125780 = CARTESIAN_POINT('',(122.043079,-137.700382,1.585)); +#125781 = VECTOR('',#125782,1.); +#125782 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#125783 = ORIENTED_EDGE('',*,*,#125784,.T.); +#125784 = EDGE_CURVE('',#125777,#125785,#125787,.T.); +#125785 = VERTEX_POINT('',#125786); +#125786 = CARTESIAN_POINT('',(121.793836,-137.700636,1.585)); +#125787 = LINE('',#125788,#125789); +#125788 = CARTESIAN_POINT('',(122.016666,-137.703933,1.585)); +#125789 = VECTOR('',#125790,1.); +#125790 = DIRECTION('',(-0.999890556675,1.479441352314E-02,0.)); +#125791 = ORIENTED_EDGE('',*,*,#125792,.T.); +#125792 = EDGE_CURVE('',#125785,#125793,#125795,.T.); +#125793 = VERTEX_POINT('',#125794); +#125794 = CARTESIAN_POINT('',(121.638611,-137.626709,1.585)); +#125795 = LINE('',#125796,#125797); +#125796 = CARTESIAN_POINT('',(121.793836,-137.700636,1.585)); +#125797 = VECTOR('',#125798,1.); +#125798 = DIRECTION('',(-0.902837187736,0.429982572252,0.)); +#125799 = ORIENTED_EDGE('',*,*,#125800,.T.); +#125800 = EDGE_CURVE('',#125793,#125801,#125803,.T.); +#125801 = VERTEX_POINT('',#125802); +#125802 = CARTESIAN_POINT('',(121.709746,-137.440817,1.585)); +#125803 = CIRCLE('',#125804,0.100000424667); +#125804 = AXIS2_PLACEMENT_3D('',#125805,#125806,#125807); +#125805 = CARTESIAN_POINT('',(121.68333310072,-137.5372661766,1.585)); +#125806 = DIRECTION('',(0.,0.,-1.)); +#125807 = DIRECTION('',(-0.447219108045,-0.894424434706,-0.)); +#125808 = ORIENTED_EDGE('',*,*,#125809,.T.); +#125809 = EDGE_CURVE('',#125801,#125810,#125812,.T.); +#125810 = VERTEX_POINT('',#125811); +#125811 = CARTESIAN_POINT('',(121.840274,-137.503933,1.585)); +#125812 = LINE('',#125813,#125814); +#125813 = CARTESIAN_POINT('',(121.709746,-137.440817,1.585)); +#125814 = VECTOR('',#125815,1.); +#125815 = DIRECTION('',(0.900274715498,-0.435322221618,0.)); +#125816 = ORIENTED_EDGE('',*,*,#125817,.T.); +#125817 = EDGE_CURVE('',#125810,#125818,#125820,.T.); +#125818 = VERTEX_POINT('',#125819); +#125819 = CARTESIAN_POINT('',(121.993059,-137.503933,1.585)); +#125820 = LINE('',#125821,#125822); +#125821 = CARTESIAN_POINT('',(121.840274,-137.503933,1.585)); +#125822 = VECTOR('',#125823,1.); +#125823 = DIRECTION('',(1.,0.,0.)); +#125824 = ORIENTED_EDGE('',*,*,#125825,.T.); +#125825 = EDGE_CURVE('',#125818,#125826,#125828,.T.); +#125826 = VERTEX_POINT('',#125827); +#125827 = CARTESIAN_POINT('',(122.183333,-137.313659,1.585)); +#125828 = CIRCLE('',#125829,0.267251693091); +#125829 = AXIS2_PLACEMENT_3D('',#125830,#125831,#125832); +#125830 = CARTESIAN_POINT('',(121.924915,-137.245515,1.585)); +#125831 = DIRECTION('',(0.,0.,1.)); +#125832 = DIRECTION('',(0.254980611018,-0.966946166032,0.)); +#125833 = ORIENTED_EDGE('',*,*,#125834,.T.); +#125834 = EDGE_CURVE('',#125826,#125835,#125837,.T.); +#125835 = VERTEX_POINT('',#125836); +#125836 = CARTESIAN_POINT('',(122.183333,-137.231066,1.585)); +#125837 = LINE('',#125838,#125839); +#125838 = CARTESIAN_POINT('',(122.183333,-137.313659,1.585)); +#125839 = VECTOR('',#125840,1.); +#125840 = DIRECTION('',(0.,1.,0.)); +#125841 = ORIENTED_EDGE('',*,*,#125842,.T.); +#125842 = EDGE_CURVE('',#125835,#125843,#125845,.T.); +#125843 = VERTEX_POINT('',#125844); +#125844 = CARTESIAN_POINT('',(122.15,-137.237266,1.585)); +#125845 = LINE('',#125846,#125847); +#125846 = CARTESIAN_POINT('',(122.183333,-137.231066,1.585)); +#125847 = VECTOR('',#125848,1.); +#125848 = DIRECTION('',(-0.98313794253,-0.182865485966,0.)); +#125849 = ORIENTED_EDGE('',*,*,#125850,.T.); +#125850 = EDGE_CURVE('',#125843,#125851,#125853,.T.); +#125851 = VERTEX_POINT('',#125852); +#125852 = CARTESIAN_POINT('',(121.863824,-137.235345,1.585)); +#125853 = LINE('',#125854,#125855); +#125854 = CARTESIAN_POINT('',(122.15,-137.237266,1.585)); +#125855 = VECTOR('',#125856,1.); +#125856 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#125857 = ORIENTED_EDGE('',*,*,#125858,.T.); +#125858 = EDGE_CURVE('',#125851,#125859,#125861,.T.); +#125859 = VERTEX_POINT('',#125860); +#125860 = CARTESIAN_POINT('',(121.838612,-137.226709,1.585)); +#125861 = LINE('',#125862,#125863); +#125862 = CARTESIAN_POINT('',(121.863824,-137.235345,1.585)); +#125863 = VECTOR('',#125864,1.); +#125864 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#125865 = ORIENTED_EDGE('',*,*,#125866,.T.); +#125866 = EDGE_CURVE('',#125859,#125867,#125869,.T.); +#125867 = VERTEX_POINT('',#125868); +#125868 = CARTESIAN_POINT('',(121.686958,-137.147605,1.585)); +#125869 = LINE('',#125870,#125871); +#125870 = CARTESIAN_POINT('',(121.838612,-137.226709,1.585)); +#125871 = VECTOR('',#125872,1.); +#125872 = DIRECTION('',(-0.886632377277,0.462474893983,0.)); +#125873 = ORIENTED_EDGE('',*,*,#125874,.T.); +#125874 = EDGE_CURVE('',#125867,#125875,#125877,.T.); +#125875 = VERTEX_POINT('',#125876); +#125876 = CARTESIAN_POINT('',(121.599176,-137.057053,1.585)); +#125877 = LINE('',#125878,#125879); +#125878 = CARTESIAN_POINT('',(121.686958,-137.147605,1.585)); +#125879 = VECTOR('',#125880,1.); +#125880 = DIRECTION('',(-0.696039578142,0.718003416189,0.)); +#125881 = ORIENTED_EDGE('',*,*,#125882,.T.); +#125882 = EDGE_CURVE('',#125875,#125883,#125885,.T.); +#125883 = VERTEX_POINT('',#125884); +#125884 = CARTESIAN_POINT('',(121.520217,-136.897013,1.585)); +#125885 = LINE('',#125886,#125887); +#125886 = CARTESIAN_POINT('',(121.599176,-137.057053,1.585)); +#125887 = VECTOR('',#125888,1.); +#125888 = DIRECTION('',(-0.442450976154,0.896792692711,0.)); +#125889 = ORIENTED_EDGE('',*,*,#125890,.T.); +#125890 = EDGE_CURVE('',#125883,#125891,#125893,.T.); +#125891 = VERTEX_POINT('',#125892); +#125892 = CARTESIAN_POINT('',(121.516666,-136.8706,1.585)); +#125893 = LINE('',#125894,#125895); +#125894 = CARTESIAN_POINT('',(121.520217,-136.897013,1.585)); +#125895 = VECTOR('',#125896,1.); +#125896 = DIRECTION('',(-0.133242620288,0.991083449634,0.)); +#125897 = ORIENTED_EDGE('',*,*,#125898,.T.); +#125898 = EDGE_CURVE('',#125891,#125899,#125901,.T.); +#125899 = VERTEX_POINT('',#125900); +#125900 = CARTESIAN_POINT('',(121.518587,-136.451091,1.585)); +#125901 = LINE('',#125902,#125903); +#125902 = CARTESIAN_POINT('',(121.516666,-136.8706,1.585)); +#125903 = VECTOR('',#125904,1.); +#125904 = DIRECTION('',(4.579114774285E-03,0.999989515799,0.)); +#125905 = ORIENTED_EDGE('',*,*,#125906,.T.); +#125906 = EDGE_CURVE('',#125899,#125907,#125909,.T.); +#125907 = VERTEX_POINT('',#125908); +#125908 = CARTESIAN_POINT('',(121.527223,-136.425879,1.585)); +#125909 = LINE('',#125910,#125911); +#125910 = CARTESIAN_POINT('',(121.518587,-136.451091,1.585)); +#125911 = VECTOR('',#125912,1.); +#125912 = DIRECTION('',(0.32405186212,0.946039317712,0.)); +#125913 = ORIENTED_EDGE('',*,*,#125914,.T.); +#125914 = EDGE_CURVE('',#125907,#125915,#125917,.T.); +#125915 = VERTEX_POINT('',#125916); +#125916 = CARTESIAN_POINT('',(121.60633,-136.274221,1.585)); +#125917 = LINE('',#125918,#125919); +#125918 = CARTESIAN_POINT('',(121.527223,-136.425879,1.585)); +#125919 = VECTOR('',#125920,1.); +#125920 = DIRECTION('',(0.462479092578,0.886630187242,0.)); +#125921 = ORIENTED_EDGE('',*,*,#125922,.T.); +#125922 = EDGE_CURVE('',#125915,#125686,#125923,.T.); +#125923 = LINE('',#125924,#125925); +#125924 = CARTESIAN_POINT('',(121.60633,-136.274221,1.585)); +#125925 = VECTOR('',#125926,1.); +#125926 = DIRECTION('',(0.718015182968,0.696027439852,0.)); +#125927 = FACE_BOUND('',#125928,.F.); +#125928 = EDGE_LOOP('',(#125929,#125939,#125947,#125956,#125964,#125973, + #125981,#125989)); +#125929 = ORIENTED_EDGE('',*,*,#125930,.T.); +#125930 = EDGE_CURVE('',#125931,#125933,#125935,.T.); +#125931 = VERTEX_POINT('',#125932); +#125932 = CARTESIAN_POINT('',(122.183333,-136.332403,1.585)); +#125933 = VERTEX_POINT('',#125934); +#125934 = CARTESIAN_POINT('',(122.126392,-136.303933,1.585)); +#125935 = LINE('',#125936,#125937); +#125936 = CARTESIAN_POINT('',(122.183333,-136.332403,1.585)); +#125937 = VECTOR('',#125938,1.); +#125938 = DIRECTION('',(-0.894430332582,0.447207312281,0.)); +#125939 = ORIENTED_EDGE('',*,*,#125940,.T.); +#125940 = EDGE_CURVE('',#125933,#125941,#125943,.T.); +#125941 = VERTEX_POINT('',#125942); +#125942 = CARTESIAN_POINT('',(121.906941,-136.303933,1.585)); +#125943 = LINE('',#125944,#125945); +#125944 = CARTESIAN_POINT('',(122.126392,-136.303933,1.585)); +#125945 = VECTOR('',#125946,1.); +#125946 = DIRECTION('',(-1.,0.,0.)); +#125947 = ORIENTED_EDGE('',*,*,#125948,.T.); +#125948 = EDGE_CURVE('',#125941,#125949,#125951,.T.); +#125949 = VERTEX_POINT('',#125950); +#125950 = CARTESIAN_POINT('',(121.716666,-136.494207,1.585)); +#125951 = CIRCLE('',#125952,0.267248556225); +#125952 = AXIS2_PLACEMENT_3D('',#125953,#125954,#125955); +#125953 = CARTESIAN_POINT('',(121.97508135812,-136.5623487162,1.585)); +#125954 = DIRECTION('',(0.,0.,1.)); +#125955 = DIRECTION('',(-0.254969976573,0.966948970239,0.)); +#125956 = ORIENTED_EDGE('',*,*,#125957,.T.); +#125957 = EDGE_CURVE('',#125949,#125958,#125960,.T.); +#125958 = VERTEX_POINT('',#125959); +#125959 = CARTESIAN_POINT('',(121.716666,-136.846991,1.585)); +#125960 = LINE('',#125961,#125962); +#125961 = CARTESIAN_POINT('',(121.716666,-136.494207,1.585)); +#125962 = VECTOR('',#125963,1.); +#125963 = DIRECTION('',(0.,-1.,0.)); +#125964 = ORIENTED_EDGE('',*,*,#125965,.T.); +#125965 = EDGE_CURVE('',#125958,#125966,#125968,.T.); +#125966 = VERTEX_POINT('',#125967); +#125967 = CARTESIAN_POINT('',(121.90694,-137.037266,1.585)); +#125968 = CIRCLE('',#125969,0.267251611057); +#125969 = AXIS2_PLACEMENT_3D('',#125970,#125971,#125972); +#125970 = CARTESIAN_POINT('',(121.97508421626,-136.7788481418,1.585)); +#125971 = DIRECTION('',(0.,0.,1.)); +#125972 = DIRECTION('',(-0.966947272063,-0.254976416656,0.)); +#125973 = ORIENTED_EDGE('',*,*,#125974,.T.); +#125974 = EDGE_CURVE('',#125966,#125975,#125977,.T.); +#125975 = VERTEX_POINT('',#125976); +#125976 = CARTESIAN_POINT('',(122.126393,-137.037266,1.585)); +#125977 = LINE('',#125978,#125979); +#125978 = CARTESIAN_POINT('',(121.90694,-137.037266,1.585)); +#125979 = VECTOR('',#125980,1.); +#125980 = DIRECTION('',(1.,0.,0.)); +#125981 = ORIENTED_EDGE('',*,*,#125982,.T.); +#125982 = EDGE_CURVE('',#125975,#125983,#125985,.T.); +#125983 = VERTEX_POINT('',#125984); +#125984 = CARTESIAN_POINT('',(122.183333,-137.008796,1.585)); +#125985 = LINE('',#125986,#125987); +#125986 = CARTESIAN_POINT('',(122.126393,-137.037266,1.585)); +#125987 = VECTOR('',#125988,1.); +#125988 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#125989 = ORIENTED_EDGE('',*,*,#125990,.T.); +#125990 = EDGE_CURVE('',#125983,#125931,#125991,.T.); +#125991 = LINE('',#125992,#125993); +#125992 = CARTESIAN_POINT('',(122.183333,-137.008796,1.585)); +#125993 = VECTOR('',#125994,1.); +#125994 = DIRECTION('',(0.,1.,0.)); +#125995 = PLANE('',#125996); +#125996 = AXIS2_PLACEMENT_3D('',#125997,#125998,#125999); +#125997 = CARTESIAN_POINT('',(0.,0.,1.585)); +#125998 = DIRECTION('',(0.,0.,1.)); +#125999 = DIRECTION('',(1.,0.,-0.)); +#126000 = SHELL_BASED_SURFACE_MODEL('',(#126001)); +#126001 = OPEN_SHELL('',(#126002)); +#126002 = ADVANCED_FACE('',(#126003),#126097,.T.); +#126003 = FACE_BOUND('',#126004,.F.); +#126004 = EDGE_LOOP('',(#126005,#126016,#126024,#126032,#126040,#126049, + #126057,#126066,#126074,#126083,#126091)); +#126005 = ORIENTED_EDGE('',*,*,#126006,.T.); +#126006 = EDGE_CURVE('',#126007,#126009,#126011,.T.); +#126007 = VERTEX_POINT('',#126008); +#126008 = CARTESIAN_POINT('',(144.919567,-136.377039,1.585)); +#126009 = VERTEX_POINT('',#126010); +#126010 = CARTESIAN_POINT('',(145.035,-136.4,1.585)); +#126011 = CIRCLE('',#126012,6.000007318647E-02); +#126012 = AXIS2_PLACEMENT_3D('',#126013,#126014,#126015); +#126013 = CARTESIAN_POINT('',(144.97499992681,-136.3999998233,1.585)); +#126014 = DIRECTION('',(0.,0.,-1.)); +#126015 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#126016 = ORIENTED_EDGE('',*,*,#126017,.T.); +#126017 = EDGE_CURVE('',#126009,#126018,#126020,.T.); +#126018 = VERTEX_POINT('',#126019); +#126019 = CARTESIAN_POINT('',(145.035,-137.54,1.585)); +#126020 = LINE('',#126021,#126022); +#126021 = CARTESIAN_POINT('',(145.035,-136.4,1.585)); +#126022 = VECTOR('',#126023,1.); +#126023 = DIRECTION('',(0.,-1.,0.)); +#126024 = ORIENTED_EDGE('',*,*,#126025,.T.); +#126025 = EDGE_CURVE('',#126018,#126026,#126028,.T.); +#126026 = VERTEX_POINT('',#126027); +#126027 = CARTESIAN_POINT('',(151.315,-137.54,1.585)); +#126028 = LINE('',#126029,#126030); +#126029 = CARTESIAN_POINT('',(145.035,-137.54,1.585)); +#126030 = VECTOR('',#126031,1.); +#126031 = DIRECTION('',(1.,0.,0.)); +#126032 = ORIENTED_EDGE('',*,*,#126033,.T.); +#126033 = EDGE_CURVE('',#126026,#126034,#126036,.T.); +#126034 = VERTEX_POINT('',#126035); +#126035 = CARTESIAN_POINT('',(151.315,-136.4,1.585)); +#126036 = LINE('',#126037,#126038); +#126037 = CARTESIAN_POINT('',(151.315,-137.54,1.585)); +#126038 = VECTOR('',#126039,1.); +#126039 = DIRECTION('',(0.,1.,0.)); +#126040 = ORIENTED_EDGE('',*,*,#126041,.T.); +#126041 = EDGE_CURVE('',#126034,#126042,#126044,.T.); +#126042 = VERTEX_POINT('',#126043); +#126043 = CARTESIAN_POINT('',(151.435,-136.4,1.585)); +#126044 = CIRCLE('',#126045,6.000000000042E-02); +#126045 = AXIS2_PLACEMENT_3D('',#126046,#126047,#126048); +#126046 = CARTESIAN_POINT('',(151.375,-136.3999997744,1.585)); +#126047 = DIRECTION('',(0.,0.,-1.)); +#126048 = DIRECTION('',(-0.999999999993,-3.759794253684E-06,-0.)); +#126049 = ORIENTED_EDGE('',*,*,#126050,.T.); +#126050 = EDGE_CURVE('',#126042,#126051,#126053,.T.); +#126051 = VERTEX_POINT('',#126052); +#126052 = CARTESIAN_POINT('',(151.435,-137.6,1.585)); +#126053 = LINE('',#126054,#126055); +#126054 = CARTESIAN_POINT('',(151.435,-136.4,1.585)); +#126055 = VECTOR('',#126056,1.); +#126056 = DIRECTION('',(0.,-1.,0.)); +#126057 = ORIENTED_EDGE('',*,*,#126058,.T.); +#126058 = EDGE_CURVE('',#126051,#126059,#126061,.T.); +#126059 = VERTEX_POINT('',#126060); +#126060 = CARTESIAN_POINT('',(151.375,-137.66,1.585)); +#126061 = CIRCLE('',#126062,5.999932016262E-02); +#126062 = AXIS2_PLACEMENT_3D('',#126063,#126064,#126065); +#126063 = CARTESIAN_POINT('',(151.37500067984,-137.6000006798,1.585)); +#126064 = DIRECTION('',(0.,0.,-1.)); +#126065 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#126066 = ORIENTED_EDGE('',*,*,#126067,.T.); +#126067 = EDGE_CURVE('',#126059,#126068,#126070,.T.); +#126068 = VERTEX_POINT('',#126069); +#126069 = CARTESIAN_POINT('',(144.975,-137.66,1.585)); +#126070 = LINE('',#126071,#126072); +#126071 = CARTESIAN_POINT('',(151.375,-137.66,1.585)); +#126072 = VECTOR('',#126073,1.); +#126073 = DIRECTION('',(-1.,0.,0.)); +#126074 = ORIENTED_EDGE('',*,*,#126075,.T.); +#126075 = EDGE_CURVE('',#126068,#126076,#126078,.T.); +#126076 = VERTEX_POINT('',#126077); +#126077 = CARTESIAN_POINT('',(144.915,-137.6,1.585)); +#126078 = CIRCLE('',#126079,5.999932016268E-02); +#126079 = AXIS2_PLACEMENT_3D('',#126080,#126081,#126082); +#126080 = CARTESIAN_POINT('',(144.97499932015,-137.6000006798,1.585)); +#126081 = DIRECTION('',(0.,0.,-1.)); +#126082 = DIRECTION('',(1.133081470031E-05,-0.999999999936,0.)); +#126083 = ORIENTED_EDGE('',*,*,#126084,.T.); +#126084 = EDGE_CURVE('',#126076,#126085,#126087,.T.); +#126085 = VERTEX_POINT('',#126086); +#126086 = CARTESIAN_POINT('',(144.915,-136.4,1.585)); +#126087 = LINE('',#126088,#126089); +#126088 = CARTESIAN_POINT('',(144.915,-137.6,1.585)); +#126089 = VECTOR('',#126090,1.); +#126090 = DIRECTION('',(0.,1.,0.)); +#126091 = ORIENTED_EDGE('',*,*,#126092,.T.); +#126092 = EDGE_CURVE('',#126085,#126007,#126093,.T.); +#126093 = LINE('',#126094,#126095); +#126094 = CARTESIAN_POINT('',(144.915,-136.4,1.585)); +#126095 = VECTOR('',#126096,1.); +#126096 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#126097 = PLANE('',#126098); +#126098 = AXIS2_PLACEMENT_3D('',#126099,#126100,#126101); +#126099 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126100 = DIRECTION('',(0.,0.,1.)); +#126101 = DIRECTION('',(1.,0.,-0.)); +#126102 = SHELL_BASED_SURFACE_MODEL('',(#126103)); +#126103 = OPEN_SHELL('',(#126104)); +#126104 = ADVANCED_FACE('',(#126105,#126333),#126384,.T.); +#126105 = FACE_BOUND('',#126106,.F.); +#126106 = EDGE_LOOP('',(#126107,#126117,#126125,#126133,#126141,#126149, + #126157,#126165,#126173,#126182,#126190,#126198,#126206,#126214, + #126222,#126230,#126239,#126247,#126255,#126263,#126271,#126279, + #126287,#126295,#126303,#126311,#126319,#126327)); +#126107 = ORIENTED_EDGE('',*,*,#126108,.T.); +#126108 = EDGE_CURVE('',#126109,#126111,#126113,.T.); +#126109 = VERTEX_POINT('',#126110); +#126110 = CARTESIAN_POINT('',(119.705278,-136.181157,1.585)); +#126111 = VERTEX_POINT('',#126112); +#126112 = CARTESIAN_POINT('',(119.860503,-136.107229,1.585)); +#126113 = LINE('',#126114,#126115); +#126114 = CARTESIAN_POINT('',(119.705278,-136.181157,1.585)); +#126115 = VECTOR('',#126116,1.); +#126116 = DIRECTION('',(0.902834929812,0.429987313198,0.)); +#126117 = ORIENTED_EDGE('',*,*,#126118,.T.); +#126118 = EDGE_CURVE('',#126111,#126119,#126121,.T.); +#126119 = VERTEX_POINT('',#126120); +#126120 = CARTESIAN_POINT('',(119.883333,-136.103933,1.585)); +#126121 = LINE('',#126122,#126123); +#126122 = CARTESIAN_POINT('',(119.860503,-136.107229,1.585)); +#126123 = VECTOR('',#126124,1.); +#126124 = DIRECTION('',(0.989738577733,0.142889984765,0.)); +#126125 = ORIENTED_EDGE('',*,*,#126126,.T.); +#126126 = EDGE_CURVE('',#126119,#126127,#126129,.T.); +#126127 = VERTEX_POINT('',#126128); +#126128 = CARTESIAN_POINT('',(120.169509,-136.105854,1.585)); +#126129 = LINE('',#126130,#126131); +#126130 = CARTESIAN_POINT('',(119.883333,-136.103933,1.585)); +#126131 = VECTOR('',#126132,1.); +#126132 = DIRECTION('',(0.999977470911,-6.712501123786E-03,0.)); +#126133 = ORIENTED_EDGE('',*,*,#126134,.T.); +#126134 = EDGE_CURVE('',#126127,#126135,#126137,.T.); +#126135 = VERTEX_POINT('',#126136); +#126136 = CARTESIAN_POINT('',(120.194722,-136.11449,1.585)); +#126137 = LINE('',#126138,#126139); +#126138 = CARTESIAN_POINT('',(120.169509,-136.105854,1.585)); +#126139 = VECTOR('',#126140,1.); +#126140 = DIRECTION('',(0.946043257817,-0.324040359121,0.)); +#126141 = ORIENTED_EDGE('',*,*,#126142,.T.); +#126142 = EDGE_CURVE('',#126135,#126143,#126145,.T.); +#126143 = VERTEX_POINT('',#126144); +#126144 = CARTESIAN_POINT('',(120.344645,-136.1916,1.585)); +#126145 = LINE('',#126146,#126147); +#126146 = CARTESIAN_POINT('',(120.194722,-136.11449,1.585)); +#126147 = VECTOR('',#126148,1.); +#126148 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#126149 = ORIENTED_EDGE('',*,*,#126150,.T.); +#126150 = EDGE_CURVE('',#126143,#126151,#126153,.T.); +#126151 = VERTEX_POINT('',#126152); +#126152 = CARTESIAN_POINT('',(120.372776,-136.225878,1.585)); +#126153 = LINE('',#126154,#126155); +#126154 = CARTESIAN_POINT('',(120.344645,-136.1916,1.585)); +#126155 = VECTOR('',#126156,1.); +#126156 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#126157 = ORIENTED_EDGE('',*,*,#126158,.T.); +#126158 = EDGE_CURVE('',#126151,#126159,#126161,.T.); +#126159 = VERTEX_POINT('',#126160); +#126160 = CARTESIAN_POINT('',(120.446703,-136.381103,1.585)); +#126161 = LINE('',#126162,#126163); +#126162 = CARTESIAN_POINT('',(120.372776,-136.225878,1.585)); +#126163 = VECTOR('',#126164,1.); +#126164 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#126165 = ORIENTED_EDGE('',*,*,#126166,.T.); +#126166 = EDGE_CURVE('',#126159,#126167,#126169,.T.); +#126167 = VERTEX_POINT('',#126168); +#126168 = CARTESIAN_POINT('',(120.45,-136.537266,1.585)); +#126169 = LINE('',#126170,#126171); +#126170 = CARTESIAN_POINT('',(120.446703,-136.381103,1.585)); +#126171 = VECTOR('',#126172,1.); +#126172 = DIRECTION('',(2.110785168813E-02,-0.99977720448,0.)); +#126173 = ORIENTED_EDGE('',*,*,#126174,.T.); +#126174 = EDGE_CURVE('',#126167,#126175,#126177,.T.); +#126175 = VERTEX_POINT('',#126176); +#126176 = CARTESIAN_POINT('',(120.388365,-136.629614,1.585)); +#126177 = CIRCLE('',#126178,9.999927715315E-02); +#126178 = AXIS2_PLACEMENT_3D('',#126179,#126180,#126181); +#126179 = CARTESIAN_POINT('',(120.35000072284,-136.5372666249,1.585)); +#126180 = DIRECTION('',(0.,0.,-1.)); +#126181 = DIRECTION('',(0.99999999998,6.250022282832E-06,0.)); +#126182 = ORIENTED_EDGE('',*,*,#126183,.T.); +#126183 = EDGE_CURVE('',#126175,#126184,#126186,.T.); +#126184 = VERTEX_POINT('',#126185); +#126185 = CARTESIAN_POINT('',(119.783333,-136.75258,1.585)); +#126186 = LINE('',#126187,#126188); +#126187 = CARTESIAN_POINT('',(120.388365,-136.629614,1.585)); +#126188 = VECTOR('',#126189,1.); +#126189 = DIRECTION('',(-0.979965551748,-0.199167058992,0.)); +#126190 = ORIENTED_EDGE('',*,*,#126191,.T.); +#126191 = EDGE_CURVE('',#126184,#126192,#126194,.T.); +#126192 = VERTEX_POINT('',#126193); +#126193 = CARTESIAN_POINT('',(119.783333,-136.913659,1.585)); +#126194 = LINE('',#126195,#126196); +#126195 = CARTESIAN_POINT('',(119.783333,-136.75258,1.585)); +#126196 = VECTOR('',#126197,1.); +#126197 = DIRECTION('',(0.,-1.,0.)); +#126198 = ORIENTED_EDGE('',*,*,#126199,.T.); +#126199 = EDGE_CURVE('',#126192,#126200,#126202,.T.); +#126200 = VERTEX_POINT('',#126201); +#126201 = CARTESIAN_POINT('',(119.824535,-136.996064,1.585)); +#126202 = LINE('',#126203,#126204); +#126203 = CARTESIAN_POINT('',(119.783333,-136.913659,1.585)); +#126204 = VECTOR('',#126205,1.); +#126205 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#126206 = ORIENTED_EDGE('',*,*,#126207,.T.); +#126207 = EDGE_CURVE('',#126200,#126208,#126210,.T.); +#126208 = VERTEX_POINT('',#126209); +#126209 = CARTESIAN_POINT('',(119.90694,-137.037266,1.585)); +#126210 = LINE('',#126211,#126212); +#126211 = CARTESIAN_POINT('',(119.824535,-136.996064,1.585)); +#126212 = VECTOR('',#126213,1.); +#126213 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#126214 = ORIENTED_EDGE('',*,*,#126215,.T.); +#126215 = EDGE_CURVE('',#126208,#126216,#126218,.T.); +#126216 = VERTEX_POINT('',#126217); +#126217 = CARTESIAN_POINT('',(120.126393,-137.037266,1.585)); +#126218 = LINE('',#126219,#126220); +#126219 = CARTESIAN_POINT('',(119.90694,-137.037266,1.585)); +#126220 = VECTOR('',#126221,1.); +#126221 = DIRECTION('',(1.,0.,0.)); +#126222 = ORIENTED_EDGE('',*,*,#126223,.T.); +#126223 = EDGE_CURVE('',#126216,#126224,#126226,.T.); +#126224 = VERTEX_POINT('',#126225); +#126225 = CARTESIAN_POINT('',(120.256921,-136.974151,1.585)); +#126226 = LINE('',#126227,#126228); +#126227 = CARTESIAN_POINT('',(120.126393,-137.037266,1.585)); +#126228 = VECTOR('',#126229,1.); +#126229 = DIRECTION('',(0.900277418559,0.435316631468,0.)); +#126230 = ORIENTED_EDGE('',*,*,#126231,.T.); +#126231 = EDGE_CURVE('',#126224,#126232,#126234,.T.); +#126232 = VERTEX_POINT('',#126233); +#126233 = CARTESIAN_POINT('',(120.344645,-137.1496,1.585)); +#126234 = CIRCLE('',#126235,0.100000294132); +#126235 = AXIS2_PLACEMENT_3D('',#126236,#126237,#126238); +#126236 = CARTESIAN_POINT('',(120.28333371921,-137.0706000906,1.585)); +#126237 = DIRECTION('',(0.,0.,-1.)); +#126238 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#126239 = ORIENTED_EDGE('',*,*,#126240,.T.); +#126240 = EDGE_CURVE('',#126232,#126241,#126243,.T.); +#126241 = VERTEX_POINT('',#126242); +#126242 = CARTESIAN_POINT('',(120.176413,-137.233715,1.585)); +#126243 = LINE('',#126244,#126245); +#126244 = CARTESIAN_POINT('',(120.344645,-137.1496,1.585)); +#126245 = VECTOR('',#126246,1.); +#126246 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#126247 = ORIENTED_EDGE('',*,*,#126248,.T.); +#126248 = EDGE_CURVE('',#126241,#126249,#126251,.T.); +#126249 = VERTEX_POINT('',#126250); +#126250 = CARTESIAN_POINT('',(120.15,-137.237266,1.585)); +#126251 = LINE('',#126252,#126253); +#126252 = CARTESIAN_POINT('',(120.176413,-137.233715,1.585)); +#126253 = VECTOR('',#126254,1.); +#126254 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#126255 = ORIENTED_EDGE('',*,*,#126256,.T.); +#126256 = EDGE_CURVE('',#126249,#126257,#126259,.T.); +#126257 = VERTEX_POINT('',#126258); +#126258 = CARTESIAN_POINT('',(119.863824,-137.235345,1.585)); +#126259 = LINE('',#126260,#126261); +#126260 = CARTESIAN_POINT('',(120.15,-137.237266,1.585)); +#126261 = VECTOR('',#126262,1.); +#126262 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#126263 = ORIENTED_EDGE('',*,*,#126264,.T.); +#126264 = EDGE_CURVE('',#126257,#126265,#126267,.T.); +#126265 = VERTEX_POINT('',#126266); +#126266 = CARTESIAN_POINT('',(119.838612,-137.226709,1.585)); +#126267 = LINE('',#126268,#126269); +#126268 = CARTESIAN_POINT('',(119.863824,-137.235345,1.585)); +#126269 = VECTOR('',#126270,1.); +#126270 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#126271 = ORIENTED_EDGE('',*,*,#126272,.T.); +#126272 = EDGE_CURVE('',#126265,#126273,#126275,.T.); +#126273 = VERTEX_POINT('',#126274); +#126274 = CARTESIAN_POINT('',(119.688689,-137.1496,1.585)); +#126275 = LINE('',#126276,#126277); +#126276 = CARTESIAN_POINT('',(119.838612,-137.226709,1.585)); +#126277 = VECTOR('',#126278,1.); +#126278 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#126279 = ORIENTED_EDGE('',*,*,#126280,.T.); +#126280 = EDGE_CURVE('',#126273,#126281,#126283,.T.); +#126281 = VERTEX_POINT('',#126282); +#126282 = CARTESIAN_POINT('',(119.660557,-137.115321,1.585)); +#126283 = LINE('',#126284,#126285); +#126284 = CARTESIAN_POINT('',(119.688689,-137.1496,1.585)); +#126285 = VECTOR('',#126286,1.); +#126286 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#126287 = ORIENTED_EDGE('',*,*,#126288,.T.); +#126288 = EDGE_CURVE('',#126281,#126289,#126291,.T.); +#126289 = VERTEX_POINT('',#126290); +#126290 = CARTESIAN_POINT('',(119.586629,-136.960095,1.585)); +#126291 = LINE('',#126292,#126293); +#126292 = CARTESIAN_POINT('',(119.660557,-137.115321,1.585)); +#126293 = VECTOR('',#126294,1.); +#126294 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#126295 = ORIENTED_EDGE('',*,*,#126296,.T.); +#126296 = EDGE_CURVE('',#126289,#126297,#126299,.T.); +#126297 = VERTEX_POINT('',#126298); +#126298 = CARTESIAN_POINT('',(119.583333,-136.937266,1.585)); +#126299 = LINE('',#126300,#126301); +#126300 = CARTESIAN_POINT('',(119.586629,-136.960095,1.585)); +#126301 = VECTOR('',#126302,1.); +#126302 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#126303 = ORIENTED_EDGE('',*,*,#126304,.T.); +#126304 = EDGE_CURVE('',#126297,#126305,#126307,.T.); +#126305 = VERTEX_POINT('',#126306); +#126306 = CARTESIAN_POINT('',(119.585254,-136.384424,1.585)); +#126307 = LINE('',#126308,#126309); +#126308 = CARTESIAN_POINT('',(119.583333,-136.937266,1.585)); +#126309 = VECTOR('',#126310,1.); +#126310 = DIRECTION('',(3.474751200159E-03,0.999993963034,0.)); +#126311 = ORIENTED_EDGE('',*,*,#126312,.T.); +#126312 = EDGE_CURVE('',#126305,#126313,#126315,.T.); +#126313 = VERTEX_POINT('',#126314); +#126314 = CARTESIAN_POINT('',(119.59389,-136.359211,1.585)); +#126315 = LINE('',#126316,#126317); +#126316 = CARTESIAN_POINT('',(119.585254,-136.384424,1.585)); +#126317 = VECTOR('',#126318,1.); +#126318 = DIRECTION('',(0.32404035912,0.946043257817,0.)); +#126319 = ORIENTED_EDGE('',*,*,#126320,.T.); +#126320 = EDGE_CURVE('',#126313,#126321,#126323,.T.); +#126321 = VERTEX_POINT('',#126322); +#126322 = CARTESIAN_POINT('',(119.671,-136.209288,1.585)); +#126323 = LINE('',#126324,#126325); +#126324 = CARTESIAN_POINT('',(119.59389,-136.359211,1.585)); +#126325 = VECTOR('',#126326,1.); +#126326 = DIRECTION('',(0.457379642008,0.889271535065,0.)); +#126327 = ORIENTED_EDGE('',*,*,#126328,.T.); +#126328 = EDGE_CURVE('',#126321,#126109,#126329,.T.); +#126329 = LINE('',#126330,#126331); +#126330 = CARTESIAN_POINT('',(119.671,-136.209288,1.585)); +#126331 = VECTOR('',#126332,1.); +#126332 = DIRECTION('',(0.773012970294,0.634390217262,0.)); +#126333 = FACE_BOUND('',#126334,.F.); +#126334 = EDGE_LOOP('',(#126335,#126346,#126354,#126362,#126370,#126378) + ); +#126335 = ORIENTED_EDGE('',*,*,#126336,.T.); +#126336 = EDGE_CURVE('',#126337,#126339,#126341,.T.); +#126337 = VERTEX_POINT('',#126338); +#126338 = CARTESIAN_POINT('',(120.208797,-136.345135,1.585)); +#126339 = VERTEX_POINT('',#126340); +#126340 = CARTESIAN_POINT('',(119.824535,-136.345135,1.585)); +#126341 = CIRCLE('',#126342,0.34062122266); +#126342 = AXIS2_PLACEMENT_3D('',#126343,#126344,#126345); +#126343 = CARTESIAN_POINT('',(120.016666,-136.6263973262,1.585)); +#126344 = DIRECTION('',(0.,0.,1.)); +#126345 = DIRECTION('',(0.564060567041,0.825733417459,-0.)); +#126346 = ORIENTED_EDGE('',*,*,#126347,.T.); +#126347 = EDGE_CURVE('',#126339,#126348,#126350,.T.); +#126348 = VERTEX_POINT('',#126349); +#126349 = CARTESIAN_POINT('',(119.783333,-136.427541,1.585)); +#126350 = LINE('',#126351,#126352); +#126351 = CARTESIAN_POINT('',(119.824535,-136.345135,1.585)); +#126352 = VECTOR('',#126353,1.); +#126353 = DIRECTION('',(-0.44720491231,-0.894431532542,0.)); +#126354 = ORIENTED_EDGE('',*,*,#126355,.T.); +#126355 = EDGE_CURVE('',#126348,#126356,#126358,.T.); +#126356 = VERTEX_POINT('',#126357); +#126357 = CARTESIAN_POINT('',(119.783333,-136.548619,1.585)); +#126358 = LINE('',#126359,#126360); +#126359 = CARTESIAN_POINT('',(119.783333,-136.427541,1.585)); +#126360 = VECTOR('',#126361,1.); +#126361 = DIRECTION('',(0.,-1.,0.)); +#126362 = ORIENTED_EDGE('',*,*,#126363,.T.); +#126363 = EDGE_CURVE('',#126356,#126364,#126366,.T.); +#126364 = VERTEX_POINT('',#126365); +#126365 = CARTESIAN_POINT('',(120.25,-136.455285,1.585)); +#126366 = LINE('',#126367,#126368); +#126367 = CARTESIAN_POINT('',(119.783333,-136.548619,1.585)); +#126368 = VECTOR('',#126369,1.); +#126369 = DIRECTION('',(0.980580433239,0.196117347393,0.)); +#126370 = ORIENTED_EDGE('',*,*,#126371,.T.); +#126371 = EDGE_CURVE('',#126364,#126372,#126374,.T.); +#126372 = VERTEX_POINT('',#126373); +#126373 = CARTESIAN_POINT('',(120.25,-136.427541,1.585)); +#126374 = LINE('',#126375,#126376); +#126375 = CARTESIAN_POINT('',(120.25,-136.455285,1.585)); +#126376 = VECTOR('',#126377,1.); +#126377 = DIRECTION('',(0.,1.,0.)); +#126378 = ORIENTED_EDGE('',*,*,#126379,.T.); +#126379 = EDGE_CURVE('',#126372,#126337,#126380,.T.); +#126380 = LINE('',#126381,#126382); +#126381 = CARTESIAN_POINT('',(120.25,-136.427541,1.585)); +#126382 = VECTOR('',#126383,1.); +#126383 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#126384 = PLANE('',#126385); +#126385 = AXIS2_PLACEMENT_3D('',#126386,#126387,#126388); +#126386 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126387 = DIRECTION('',(0.,0.,1.)); +#126388 = DIRECTION('',(1.,0.,-0.)); +#126389 = SHELL_BASED_SURFACE_MODEL('',(#126390)); +#126390 = OPEN_SHELL('',(#126391)); +#126391 = ADVANCED_FACE('',(#126392,#126620),#126671,.T.); +#126392 = FACE_BOUND('',#126393,.F.); +#126393 = EDGE_LOOP('',(#126394,#126404,#126412,#126420,#126428,#126436, + #126444,#126452,#126460,#126469,#126477,#126485,#126493,#126501, + #126509,#126517,#126526,#126534,#126542,#126550,#126558,#126566, + #126574,#126582,#126590,#126598,#126606,#126614)); +#126394 = ORIENTED_EDGE('',*,*,#126395,.T.); +#126395 = EDGE_CURVE('',#126396,#126398,#126400,.T.); +#126396 = VERTEX_POINT('',#126397); +#126397 = CARTESIAN_POINT('',(122.905278,-136.181157,1.585)); +#126398 = VERTEX_POINT('',#126399); +#126399 = CARTESIAN_POINT('',(123.060503,-136.107229,1.585)); +#126400 = LINE('',#126401,#126402); +#126401 = CARTESIAN_POINT('',(122.905278,-136.181157,1.585)); +#126402 = VECTOR('',#126403,1.); +#126403 = DIRECTION('',(0.902834929812,0.429987313198,0.)); +#126404 = ORIENTED_EDGE('',*,*,#126405,.T.); +#126405 = EDGE_CURVE('',#126398,#126406,#126408,.T.); +#126406 = VERTEX_POINT('',#126407); +#126407 = CARTESIAN_POINT('',(123.083333,-136.103933,1.585)); +#126408 = LINE('',#126409,#126410); +#126409 = CARTESIAN_POINT('',(123.060503,-136.107229,1.585)); +#126410 = VECTOR('',#126411,1.); +#126411 = DIRECTION('',(0.989738577733,0.142889984765,0.)); +#126412 = ORIENTED_EDGE('',*,*,#126413,.T.); +#126413 = EDGE_CURVE('',#126406,#126414,#126416,.T.); +#126414 = VERTEX_POINT('',#126415); +#126415 = CARTESIAN_POINT('',(123.369509,-136.105854,1.585)); +#126416 = LINE('',#126417,#126418); +#126417 = CARTESIAN_POINT('',(123.083333,-136.103933,1.585)); +#126418 = VECTOR('',#126419,1.); +#126419 = DIRECTION('',(0.999977470911,-6.712501123787E-03,0.)); +#126420 = ORIENTED_EDGE('',*,*,#126421,.T.); +#126421 = EDGE_CURVE('',#126414,#126422,#126424,.T.); +#126422 = VERTEX_POINT('',#126423); +#126423 = CARTESIAN_POINT('',(123.394722,-136.11449,1.585)); +#126424 = LINE('',#126425,#126426); +#126425 = CARTESIAN_POINT('',(123.369509,-136.105854,1.585)); +#126426 = VECTOR('',#126427,1.); +#126427 = DIRECTION('',(0.946043257817,-0.32404035912,0.)); +#126428 = ORIENTED_EDGE('',*,*,#126429,.T.); +#126429 = EDGE_CURVE('',#126422,#126430,#126432,.T.); +#126430 = VERTEX_POINT('',#126431); +#126431 = CARTESIAN_POINT('',(123.544645,-136.1916,1.585)); +#126432 = LINE('',#126433,#126434); +#126433 = CARTESIAN_POINT('',(123.394722,-136.11449,1.585)); +#126434 = VECTOR('',#126435,1.); +#126435 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#126436 = ORIENTED_EDGE('',*,*,#126437,.T.); +#126437 = EDGE_CURVE('',#126430,#126438,#126440,.T.); +#126438 = VERTEX_POINT('',#126439); +#126439 = CARTESIAN_POINT('',(123.572776,-136.225878,1.585)); +#126440 = LINE('',#126441,#126442); +#126441 = CARTESIAN_POINT('',(123.544645,-136.1916,1.585)); +#126442 = VECTOR('',#126443,1.); +#126443 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#126444 = ORIENTED_EDGE('',*,*,#126445,.T.); +#126445 = EDGE_CURVE('',#126438,#126446,#126448,.T.); +#126446 = VERTEX_POINT('',#126447); +#126447 = CARTESIAN_POINT('',(123.646703,-136.381103,1.585)); +#126448 = LINE('',#126449,#126450); +#126449 = CARTESIAN_POINT('',(123.572776,-136.225878,1.585)); +#126450 = VECTOR('',#126451,1.); +#126451 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#126452 = ORIENTED_EDGE('',*,*,#126453,.T.); +#126453 = EDGE_CURVE('',#126446,#126454,#126456,.T.); +#126454 = VERTEX_POINT('',#126455); +#126455 = CARTESIAN_POINT('',(123.65,-136.537266,1.585)); +#126456 = LINE('',#126457,#126458); +#126457 = CARTESIAN_POINT('',(123.646703,-136.381103,1.585)); +#126458 = VECTOR('',#126459,1.); +#126459 = DIRECTION('',(2.110785168813E-02,-0.99977720448,0.)); +#126460 = ORIENTED_EDGE('',*,*,#126461,.T.); +#126461 = EDGE_CURVE('',#126454,#126462,#126464,.T.); +#126462 = VERTEX_POINT('',#126463); +#126463 = CARTESIAN_POINT('',(123.588365,-136.629614,1.585)); +#126464 = CIRCLE('',#126465,9.999927715323E-02); +#126465 = AXIS2_PLACEMENT_3D('',#126466,#126467,#126468); +#126466 = CARTESIAN_POINT('',(123.55000072284,-136.5372666249,1.585)); +#126467 = DIRECTION('',(0.,0.,-1.)); +#126468 = DIRECTION('',(0.99999999998,6.25002171439E-06,0.)); +#126469 = ORIENTED_EDGE('',*,*,#126470,.T.); +#126470 = EDGE_CURVE('',#126462,#126471,#126473,.T.); +#126471 = VERTEX_POINT('',#126472); +#126472 = CARTESIAN_POINT('',(122.983333,-136.75258,1.585)); +#126473 = LINE('',#126474,#126475); +#126474 = CARTESIAN_POINT('',(123.588365,-136.629614,1.585)); +#126475 = VECTOR('',#126476,1.); +#126476 = DIRECTION('',(-0.979965551748,-0.199167058992,0.)); +#126477 = ORIENTED_EDGE('',*,*,#126478,.T.); +#126478 = EDGE_CURVE('',#126471,#126479,#126481,.T.); +#126479 = VERTEX_POINT('',#126480); +#126480 = CARTESIAN_POINT('',(122.983333,-136.913659,1.585)); +#126481 = LINE('',#126482,#126483); +#126482 = CARTESIAN_POINT('',(122.983333,-136.75258,1.585)); +#126483 = VECTOR('',#126484,1.); +#126484 = DIRECTION('',(0.,-1.,0.)); +#126485 = ORIENTED_EDGE('',*,*,#126486,.T.); +#126486 = EDGE_CURVE('',#126479,#126487,#126489,.T.); +#126487 = VERTEX_POINT('',#126488); +#126488 = CARTESIAN_POINT('',(123.024535,-136.996064,1.585)); +#126489 = LINE('',#126490,#126491); +#126490 = CARTESIAN_POINT('',(122.983333,-136.913659,1.585)); +#126491 = VECTOR('',#126492,1.); +#126492 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#126493 = ORIENTED_EDGE('',*,*,#126494,.T.); +#126494 = EDGE_CURVE('',#126487,#126495,#126497,.T.); +#126495 = VERTEX_POINT('',#126496); +#126496 = CARTESIAN_POINT('',(123.10694,-137.037266,1.585)); +#126497 = LINE('',#126498,#126499); +#126498 = CARTESIAN_POINT('',(123.024535,-136.996064,1.585)); +#126499 = VECTOR('',#126500,1.); +#126500 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#126501 = ORIENTED_EDGE('',*,*,#126502,.T.); +#126502 = EDGE_CURVE('',#126495,#126503,#126505,.T.); +#126503 = VERTEX_POINT('',#126504); +#126504 = CARTESIAN_POINT('',(123.326393,-137.037266,1.585)); +#126505 = LINE('',#126506,#126507); +#126506 = CARTESIAN_POINT('',(123.10694,-137.037266,1.585)); +#126507 = VECTOR('',#126508,1.); +#126508 = DIRECTION('',(1.,0.,0.)); +#126509 = ORIENTED_EDGE('',*,*,#126510,.T.); +#126510 = EDGE_CURVE('',#126503,#126511,#126513,.T.); +#126511 = VERTEX_POINT('',#126512); +#126512 = CARTESIAN_POINT('',(123.456921,-136.974151,1.585)); +#126513 = LINE('',#126514,#126515); +#126514 = CARTESIAN_POINT('',(123.326393,-137.037266,1.585)); +#126515 = VECTOR('',#126516,1.); +#126516 = DIRECTION('',(0.900277418559,0.435316631469,0.)); +#126517 = ORIENTED_EDGE('',*,*,#126518,.T.); +#126518 = EDGE_CURVE('',#126511,#126519,#126521,.T.); +#126519 = VERTEX_POINT('',#126520); +#126520 = CARTESIAN_POINT('',(123.544645,-137.1496,1.585)); +#126521 = CIRCLE('',#126522,0.100000294132); +#126522 = AXIS2_PLACEMENT_3D('',#126523,#126524,#126525); +#126523 = CARTESIAN_POINT('',(123.48333371921,-137.0706000906,1.585)); +#126524 = DIRECTION('',(0.,0.,-1.)); +#126525 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#126526 = ORIENTED_EDGE('',*,*,#126527,.T.); +#126527 = EDGE_CURVE('',#126519,#126528,#126530,.T.); +#126528 = VERTEX_POINT('',#126529); +#126529 = CARTESIAN_POINT('',(123.376413,-137.233715,1.585)); +#126530 = LINE('',#126531,#126532); +#126531 = CARTESIAN_POINT('',(123.544645,-137.1496,1.585)); +#126532 = VECTOR('',#126533,1.); +#126533 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#126534 = ORIENTED_EDGE('',*,*,#126535,.T.); +#126535 = EDGE_CURVE('',#126528,#126536,#126538,.T.); +#126536 = VERTEX_POINT('',#126537); +#126537 = CARTESIAN_POINT('',(123.35,-137.237266,1.585)); +#126538 = LINE('',#126539,#126540); +#126539 = CARTESIAN_POINT('',(123.376413,-137.233715,1.585)); +#126540 = VECTOR('',#126541,1.); +#126541 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#126542 = ORIENTED_EDGE('',*,*,#126543,.T.); +#126543 = EDGE_CURVE('',#126536,#126544,#126546,.T.); +#126544 = VERTEX_POINT('',#126545); +#126545 = CARTESIAN_POINT('',(123.063824,-137.235345,1.585)); +#126546 = LINE('',#126547,#126548); +#126547 = CARTESIAN_POINT('',(123.35,-137.237266,1.585)); +#126548 = VECTOR('',#126549,1.); +#126549 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#126550 = ORIENTED_EDGE('',*,*,#126551,.T.); +#126551 = EDGE_CURVE('',#126544,#126552,#126554,.T.); +#126552 = VERTEX_POINT('',#126553); +#126553 = CARTESIAN_POINT('',(123.038612,-137.226709,1.585)); +#126554 = LINE('',#126555,#126556); +#126555 = CARTESIAN_POINT('',(123.063824,-137.235345,1.585)); +#126556 = VECTOR('',#126557,1.); +#126557 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#126558 = ORIENTED_EDGE('',*,*,#126559,.T.); +#126559 = EDGE_CURVE('',#126552,#126560,#126562,.T.); +#126560 = VERTEX_POINT('',#126561); +#126561 = CARTESIAN_POINT('',(122.888689,-137.1496,1.585)); +#126562 = LINE('',#126563,#126564); +#126563 = CARTESIAN_POINT('',(123.038612,-137.226709,1.585)); +#126564 = VECTOR('',#126565,1.); +#126565 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#126566 = ORIENTED_EDGE('',*,*,#126567,.T.); +#126567 = EDGE_CURVE('',#126560,#126568,#126570,.T.); +#126568 = VERTEX_POINT('',#126569); +#126569 = CARTESIAN_POINT('',(122.860557,-137.115321,1.585)); +#126570 = LINE('',#126571,#126572); +#126571 = CARTESIAN_POINT('',(122.888689,-137.1496,1.585)); +#126572 = VECTOR('',#126573,1.); +#126573 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#126574 = ORIENTED_EDGE('',*,*,#126575,.T.); +#126575 = EDGE_CURVE('',#126568,#126576,#126578,.T.); +#126576 = VERTEX_POINT('',#126577); +#126577 = CARTESIAN_POINT('',(122.786629,-136.960095,1.585)); +#126578 = LINE('',#126579,#126580); +#126579 = CARTESIAN_POINT('',(122.860557,-137.115321,1.585)); +#126580 = VECTOR('',#126581,1.); +#126581 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#126582 = ORIENTED_EDGE('',*,*,#126583,.T.); +#126583 = EDGE_CURVE('',#126576,#126584,#126586,.T.); +#126584 = VERTEX_POINT('',#126585); +#126585 = CARTESIAN_POINT('',(122.783333,-136.937266,1.585)); +#126586 = LINE('',#126587,#126588); +#126587 = CARTESIAN_POINT('',(122.786629,-136.960095,1.585)); +#126588 = VECTOR('',#126589,1.); +#126589 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#126590 = ORIENTED_EDGE('',*,*,#126591,.T.); +#126591 = EDGE_CURVE('',#126584,#126592,#126594,.T.); +#126592 = VERTEX_POINT('',#126593); +#126593 = CARTESIAN_POINT('',(122.785254,-136.384424,1.585)); +#126594 = LINE('',#126595,#126596); +#126595 = CARTESIAN_POINT('',(122.783333,-136.937266,1.585)); +#126596 = VECTOR('',#126597,1.); +#126597 = DIRECTION('',(3.474751200133E-03,0.999993963034,0.)); +#126598 = ORIENTED_EDGE('',*,*,#126599,.T.); +#126599 = EDGE_CURVE('',#126592,#126600,#126602,.T.); +#126600 = VERTEX_POINT('',#126601); +#126601 = CARTESIAN_POINT('',(122.79389,-136.359211,1.585)); +#126602 = LINE('',#126603,#126604); +#126603 = CARTESIAN_POINT('',(122.785254,-136.384424,1.585)); +#126604 = VECTOR('',#126605,1.); +#126605 = DIRECTION('',(0.324040359121,0.946043257817,0.)); +#126606 = ORIENTED_EDGE('',*,*,#126607,.T.); +#126607 = EDGE_CURVE('',#126600,#126608,#126610,.T.); +#126608 = VERTEX_POINT('',#126609); +#126609 = CARTESIAN_POINT('',(122.871,-136.209288,1.585)); +#126610 = LINE('',#126611,#126612); +#126611 = CARTESIAN_POINT('',(122.79389,-136.359211,1.585)); +#126612 = VECTOR('',#126613,1.); +#126613 = DIRECTION('',(0.457379642008,0.889271535065,0.)); +#126614 = ORIENTED_EDGE('',*,*,#126615,.T.); +#126615 = EDGE_CURVE('',#126608,#126396,#126616,.T.); +#126616 = LINE('',#126617,#126618); +#126617 = CARTESIAN_POINT('',(122.871,-136.209288,1.585)); +#126618 = VECTOR('',#126619,1.); +#126619 = DIRECTION('',(0.773012970294,0.634390217262,0.)); +#126620 = FACE_BOUND('',#126621,.F.); +#126621 = EDGE_LOOP('',(#126622,#126633,#126641,#126649,#126657,#126665) + ); +#126622 = ORIENTED_EDGE('',*,*,#126623,.T.); +#126623 = EDGE_CURVE('',#126624,#126626,#126628,.T.); +#126624 = VERTEX_POINT('',#126625); +#126625 = CARTESIAN_POINT('',(123.408797,-136.345135,1.585)); +#126626 = VERTEX_POINT('',#126627); +#126627 = CARTESIAN_POINT('',(123.024535,-136.345135,1.585)); +#126628 = CIRCLE('',#126629,0.34062122266); +#126629 = AXIS2_PLACEMENT_3D('',#126630,#126631,#126632); +#126630 = CARTESIAN_POINT('',(123.216666,-136.6263973262,1.585)); +#126631 = DIRECTION('',(0.,0.,1.)); +#126632 = DIRECTION('',(0.564060567041,0.825733417459,-0.)); +#126633 = ORIENTED_EDGE('',*,*,#126634,.T.); +#126634 = EDGE_CURVE('',#126626,#126635,#126637,.T.); +#126635 = VERTEX_POINT('',#126636); +#126636 = CARTESIAN_POINT('',(122.983333,-136.427541,1.585)); +#126637 = LINE('',#126638,#126639); +#126638 = CARTESIAN_POINT('',(123.024535,-136.345135,1.585)); +#126639 = VECTOR('',#126640,1.); +#126640 = DIRECTION('',(-0.44720491231,-0.894431532542,0.)); +#126641 = ORIENTED_EDGE('',*,*,#126642,.T.); +#126642 = EDGE_CURVE('',#126635,#126643,#126645,.T.); +#126643 = VERTEX_POINT('',#126644); +#126644 = CARTESIAN_POINT('',(122.983333,-136.548619,1.585)); +#126645 = LINE('',#126646,#126647); +#126646 = CARTESIAN_POINT('',(122.983333,-136.427541,1.585)); +#126647 = VECTOR('',#126648,1.); +#126648 = DIRECTION('',(0.,-1.,0.)); +#126649 = ORIENTED_EDGE('',*,*,#126650,.T.); +#126650 = EDGE_CURVE('',#126643,#126651,#126653,.T.); +#126651 = VERTEX_POINT('',#126652); +#126652 = CARTESIAN_POINT('',(123.45,-136.455285,1.585)); +#126653 = LINE('',#126654,#126655); +#126654 = CARTESIAN_POINT('',(122.983333,-136.548619,1.585)); +#126655 = VECTOR('',#126656,1.); +#126656 = DIRECTION('',(0.980580433239,0.196117347393,0.)); +#126657 = ORIENTED_EDGE('',*,*,#126658,.T.); +#126658 = EDGE_CURVE('',#126651,#126659,#126661,.T.); +#126659 = VERTEX_POINT('',#126660); +#126660 = CARTESIAN_POINT('',(123.45,-136.427541,1.585)); +#126661 = LINE('',#126662,#126663); +#126662 = CARTESIAN_POINT('',(123.45,-136.455285,1.585)); +#126663 = VECTOR('',#126664,1.); +#126664 = DIRECTION('',(0.,1.,0.)); +#126665 = ORIENTED_EDGE('',*,*,#126666,.T.); +#126666 = EDGE_CURVE('',#126659,#126624,#126667,.T.); +#126667 = LINE('',#126668,#126669); +#126668 = CARTESIAN_POINT('',(123.45,-136.427541,1.585)); +#126669 = VECTOR('',#126670,1.); +#126670 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#126671 = PLANE('',#126672); +#126672 = AXIS2_PLACEMENT_3D('',#126673,#126674,#126675); +#126673 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126674 = DIRECTION('',(0.,0.,1.)); +#126675 = DIRECTION('',(1.,0.,-0.)); +#126676 = SHELL_BASED_SURFACE_MODEL('',(#126677)); +#126677 = OPEN_SHELL('',(#126678)); +#126678 = ADVANCED_FACE('',(#126679,#126907),#126958,.T.); +#126679 = FACE_BOUND('',#126680,.F.); +#126680 = EDGE_LOOP('',(#126681,#126691,#126699,#126707,#126715,#126723, + #126731,#126739,#126747,#126756,#126764,#126772,#126780,#126788, + #126796,#126804,#126813,#126821,#126829,#126837,#126845,#126853, + #126861,#126869,#126877,#126885,#126893,#126901)); +#126681 = ORIENTED_EDGE('',*,*,#126682,.T.); +#126682 = EDGE_CURVE('',#126683,#126685,#126687,.T.); +#126683 = VERTEX_POINT('',#126684); +#126684 = CARTESIAN_POINT('',(126.838612,-136.181157,1.585)); +#126685 = VERTEX_POINT('',#126686); +#126686 = CARTESIAN_POINT('',(126.993837,-136.107229,1.585)); +#126687 = LINE('',#126688,#126689); +#126688 = CARTESIAN_POINT('',(126.838612,-136.181157,1.585)); +#126689 = VECTOR('',#126690,1.); +#126690 = DIRECTION('',(0.902834929812,0.429987313198,0.)); +#126691 = ORIENTED_EDGE('',*,*,#126692,.T.); +#126692 = EDGE_CURVE('',#126685,#126693,#126695,.T.); +#126693 = VERTEX_POINT('',#126694); +#126694 = CARTESIAN_POINT('',(127.016667,-136.103933,1.585)); +#126695 = LINE('',#126696,#126697); +#126696 = CARTESIAN_POINT('',(126.993837,-136.107229,1.585)); +#126697 = VECTOR('',#126698,1.); +#126698 = DIRECTION('',(0.989738577733,0.142889984765,0.)); +#126699 = ORIENTED_EDGE('',*,*,#126700,.T.); +#126700 = EDGE_CURVE('',#126693,#126701,#126703,.T.); +#126701 = VERTEX_POINT('',#126702); +#126702 = CARTESIAN_POINT('',(127.302843,-136.105854,1.585)); +#126703 = LINE('',#126704,#126705); +#126704 = CARTESIAN_POINT('',(127.016667,-136.103933,1.585)); +#126705 = VECTOR('',#126706,1.); +#126706 = DIRECTION('',(0.999977470911,-6.712501123787E-03,0.)); +#126707 = ORIENTED_EDGE('',*,*,#126708,.T.); +#126708 = EDGE_CURVE('',#126701,#126709,#126711,.T.); +#126709 = VERTEX_POINT('',#126710); +#126710 = CARTESIAN_POINT('',(127.328056,-136.11449,1.585)); +#126711 = LINE('',#126712,#126713); +#126712 = CARTESIAN_POINT('',(127.302843,-136.105854,1.585)); +#126713 = VECTOR('',#126714,1.); +#126714 = DIRECTION('',(0.946043257817,-0.32404035912,0.)); +#126715 = ORIENTED_EDGE('',*,*,#126716,.T.); +#126716 = EDGE_CURVE('',#126709,#126717,#126719,.T.); +#126717 = VERTEX_POINT('',#126718); +#126718 = CARTESIAN_POINT('',(127.477979,-136.1916,1.585)); +#126719 = LINE('',#126720,#126721); +#126720 = CARTESIAN_POINT('',(127.328056,-136.11449,1.585)); +#126721 = VECTOR('',#126722,1.); +#126722 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#126723 = ORIENTED_EDGE('',*,*,#126724,.T.); +#126724 = EDGE_CURVE('',#126717,#126725,#126727,.T.); +#126725 = VERTEX_POINT('',#126726); +#126726 = CARTESIAN_POINT('',(127.50611,-136.225878,1.585)); +#126727 = LINE('',#126728,#126729); +#126728 = CARTESIAN_POINT('',(127.477979,-136.1916,1.585)); +#126729 = VECTOR('',#126730,1.); +#126730 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#126731 = ORIENTED_EDGE('',*,*,#126732,.T.); +#126732 = EDGE_CURVE('',#126725,#126733,#126735,.T.); +#126733 = VERTEX_POINT('',#126734); +#126734 = CARTESIAN_POINT('',(127.580037,-136.381103,1.585)); +#126735 = LINE('',#126736,#126737); +#126736 = CARTESIAN_POINT('',(127.50611,-136.225878,1.585)); +#126737 = VECTOR('',#126738,1.); +#126738 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#126739 = ORIENTED_EDGE('',*,*,#126740,.T.); +#126740 = EDGE_CURVE('',#126733,#126741,#126743,.T.); +#126741 = VERTEX_POINT('',#126742); +#126742 = CARTESIAN_POINT('',(127.583334,-136.537266,1.585)); +#126743 = LINE('',#126744,#126745); +#126744 = CARTESIAN_POINT('',(127.580037,-136.381103,1.585)); +#126745 = VECTOR('',#126746,1.); +#126746 = DIRECTION('',(2.110785168804E-02,-0.99977720448,0.)); +#126747 = ORIENTED_EDGE('',*,*,#126748,.T.); +#126748 = EDGE_CURVE('',#126741,#126749,#126751,.T.); +#126749 = VERTEX_POINT('',#126750); +#126750 = CARTESIAN_POINT('',(127.521699,-136.629614,1.585)); +#126751 = CIRCLE('',#126752,9.999927715317E-02); +#126752 = AXIS2_PLACEMENT_3D('',#126753,#126754,#126755); +#126753 = CARTESIAN_POINT('',(127.48333472284,-136.5372666249,1.585)); +#126754 = DIRECTION('',(0.,0.,-1.)); +#126755 = DIRECTION('',(0.99999999998,6.250021998613E-06,0.)); +#126756 = ORIENTED_EDGE('',*,*,#126757,.T.); +#126757 = EDGE_CURVE('',#126749,#126758,#126760,.T.); +#126758 = VERTEX_POINT('',#126759); +#126759 = CARTESIAN_POINT('',(126.916667,-136.75258,1.585)); +#126760 = LINE('',#126761,#126762); +#126761 = CARTESIAN_POINT('',(127.521699,-136.629614,1.585)); +#126762 = VECTOR('',#126763,1.); +#126763 = DIRECTION('',(-0.979965551748,-0.199167058992,0.)); +#126764 = ORIENTED_EDGE('',*,*,#126765,.T.); +#126765 = EDGE_CURVE('',#126758,#126766,#126768,.T.); +#126766 = VERTEX_POINT('',#126767); +#126767 = CARTESIAN_POINT('',(126.916667,-136.913659,1.585)); +#126768 = LINE('',#126769,#126770); +#126769 = CARTESIAN_POINT('',(126.916667,-136.75258,1.585)); +#126770 = VECTOR('',#126771,1.); +#126771 = DIRECTION('',(0.,-1.,0.)); +#126772 = ORIENTED_EDGE('',*,*,#126773,.T.); +#126773 = EDGE_CURVE('',#126766,#126774,#126776,.T.); +#126774 = VERTEX_POINT('',#126775); +#126775 = CARTESIAN_POINT('',(126.957869,-136.996064,1.585)); +#126776 = LINE('',#126777,#126778); +#126777 = CARTESIAN_POINT('',(126.916667,-136.913659,1.585)); +#126778 = VECTOR('',#126779,1.); +#126779 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#126780 = ORIENTED_EDGE('',*,*,#126781,.T.); +#126781 = EDGE_CURVE('',#126774,#126782,#126784,.T.); +#126782 = VERTEX_POINT('',#126783); +#126783 = CARTESIAN_POINT('',(127.040274,-137.037266,1.585)); +#126784 = LINE('',#126785,#126786); +#126785 = CARTESIAN_POINT('',(126.957869,-136.996064,1.585)); +#126786 = VECTOR('',#126787,1.); +#126787 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#126788 = ORIENTED_EDGE('',*,*,#126789,.T.); +#126789 = EDGE_CURVE('',#126782,#126790,#126792,.T.); +#126790 = VERTEX_POINT('',#126791); +#126791 = CARTESIAN_POINT('',(127.259727,-137.037266,1.585)); +#126792 = LINE('',#126793,#126794); +#126793 = CARTESIAN_POINT('',(127.040274,-137.037266,1.585)); +#126794 = VECTOR('',#126795,1.); +#126795 = DIRECTION('',(1.,0.,0.)); +#126796 = ORIENTED_EDGE('',*,*,#126797,.T.); +#126797 = EDGE_CURVE('',#126790,#126798,#126800,.T.); +#126798 = VERTEX_POINT('',#126799); +#126799 = CARTESIAN_POINT('',(127.390255,-136.974151,1.585)); +#126800 = LINE('',#126801,#126802); +#126801 = CARTESIAN_POINT('',(127.259727,-137.037266,1.585)); +#126802 = VECTOR('',#126803,1.); +#126803 = DIRECTION('',(0.900277418559,0.435316631469,0.)); +#126804 = ORIENTED_EDGE('',*,*,#126805,.T.); +#126805 = EDGE_CURVE('',#126798,#126806,#126808,.T.); +#126806 = VERTEX_POINT('',#126807); +#126807 = CARTESIAN_POINT('',(127.477979,-137.1496,1.585)); +#126808 = CIRCLE('',#126809,0.100000294132); +#126809 = AXIS2_PLACEMENT_3D('',#126810,#126811,#126812); +#126810 = CARTESIAN_POINT('',(127.41666771921,-137.0706000906,1.585)); +#126811 = DIRECTION('',(0.,0.,-1.)); +#126812 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#126813 = ORIENTED_EDGE('',*,*,#126814,.T.); +#126814 = EDGE_CURVE('',#126806,#126815,#126817,.T.); +#126815 = VERTEX_POINT('',#126816); +#126816 = CARTESIAN_POINT('',(127.309747,-137.233715,1.585)); +#126817 = LINE('',#126818,#126819); +#126818 = CARTESIAN_POINT('',(127.477979,-137.1496,1.585)); +#126819 = VECTOR('',#126820,1.); +#126820 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#126821 = ORIENTED_EDGE('',*,*,#126822,.T.); +#126822 = EDGE_CURVE('',#126815,#126823,#126825,.T.); +#126823 = VERTEX_POINT('',#126824); +#126824 = CARTESIAN_POINT('',(127.283334,-137.237266,1.585)); +#126825 = LINE('',#126826,#126827); +#126826 = CARTESIAN_POINT('',(127.309747,-137.233715,1.585)); +#126827 = VECTOR('',#126828,1.); +#126828 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#126829 = ORIENTED_EDGE('',*,*,#126830,.T.); +#126830 = EDGE_CURVE('',#126823,#126831,#126833,.T.); +#126831 = VERTEX_POINT('',#126832); +#126832 = CARTESIAN_POINT('',(126.997158,-137.235345,1.585)); +#126833 = LINE('',#126834,#126835); +#126834 = CARTESIAN_POINT('',(127.283334,-137.237266,1.585)); +#126835 = VECTOR('',#126836,1.); +#126836 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#126837 = ORIENTED_EDGE('',*,*,#126838,.T.); +#126838 = EDGE_CURVE('',#126831,#126839,#126841,.T.); +#126839 = VERTEX_POINT('',#126840); +#126840 = CARTESIAN_POINT('',(126.971946,-137.226709,1.585)); +#126841 = LINE('',#126842,#126843); +#126842 = CARTESIAN_POINT('',(126.997158,-137.235345,1.585)); +#126843 = VECTOR('',#126844,1.); +#126844 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#126845 = ORIENTED_EDGE('',*,*,#126846,.T.); +#126846 = EDGE_CURVE('',#126839,#126847,#126849,.T.); +#126847 = VERTEX_POINT('',#126848); +#126848 = CARTESIAN_POINT('',(126.822023,-137.1496,1.585)); +#126849 = LINE('',#126850,#126851); +#126850 = CARTESIAN_POINT('',(126.971946,-137.226709,1.585)); +#126851 = VECTOR('',#126852,1.); +#126852 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#126853 = ORIENTED_EDGE('',*,*,#126854,.T.); +#126854 = EDGE_CURVE('',#126847,#126855,#126857,.T.); +#126855 = VERTEX_POINT('',#126856); +#126856 = CARTESIAN_POINT('',(126.793891,-137.115321,1.585)); +#126857 = LINE('',#126858,#126859); +#126858 = CARTESIAN_POINT('',(126.822023,-137.1496,1.585)); +#126859 = VECTOR('',#126860,1.); +#126860 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#126861 = ORIENTED_EDGE('',*,*,#126862,.T.); +#126862 = EDGE_CURVE('',#126855,#126863,#126865,.T.); +#126863 = VERTEX_POINT('',#126864); +#126864 = CARTESIAN_POINT('',(126.719963,-136.960095,1.585)); +#126865 = LINE('',#126866,#126867); +#126866 = CARTESIAN_POINT('',(126.793891,-137.115321,1.585)); +#126867 = VECTOR('',#126868,1.); +#126868 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#126869 = ORIENTED_EDGE('',*,*,#126870,.T.); +#126870 = EDGE_CURVE('',#126863,#126871,#126873,.T.); +#126871 = VERTEX_POINT('',#126872); +#126872 = CARTESIAN_POINT('',(126.716667,-136.937266,1.585)); +#126873 = LINE('',#126874,#126875); +#126874 = CARTESIAN_POINT('',(126.719963,-136.960095,1.585)); +#126875 = VECTOR('',#126876,1.); +#126876 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#126877 = ORIENTED_EDGE('',*,*,#126878,.T.); +#126878 = EDGE_CURVE('',#126871,#126879,#126881,.T.); +#126879 = VERTEX_POINT('',#126880); +#126880 = CARTESIAN_POINT('',(126.718588,-136.384424,1.585)); +#126881 = LINE('',#126882,#126883); +#126882 = CARTESIAN_POINT('',(126.716667,-136.937266,1.585)); +#126883 = VECTOR('',#126884,1.); +#126884 = DIRECTION('',(3.474751200133E-03,0.999993963034,0.)); +#126885 = ORIENTED_EDGE('',*,*,#126886,.T.); +#126886 = EDGE_CURVE('',#126879,#126887,#126889,.T.); +#126887 = VERTEX_POINT('',#126888); +#126888 = CARTESIAN_POINT('',(126.727224,-136.359211,1.585)); +#126889 = LINE('',#126890,#126891); +#126890 = CARTESIAN_POINT('',(126.718588,-136.384424,1.585)); +#126891 = VECTOR('',#126892,1.); +#126892 = DIRECTION('',(0.324040359121,0.946043257817,0.)); +#126893 = ORIENTED_EDGE('',*,*,#126894,.T.); +#126894 = EDGE_CURVE('',#126887,#126895,#126897,.T.); +#126895 = VERTEX_POINT('',#126896); +#126896 = CARTESIAN_POINT('',(126.804334,-136.209288,1.585)); +#126897 = LINE('',#126898,#126899); +#126898 = CARTESIAN_POINT('',(126.727224,-136.359211,1.585)); +#126899 = VECTOR('',#126900,1.); +#126900 = DIRECTION('',(0.457379642008,0.889271535065,0.)); +#126901 = ORIENTED_EDGE('',*,*,#126902,.T.); +#126902 = EDGE_CURVE('',#126895,#126683,#126903,.T.); +#126903 = LINE('',#126904,#126905); +#126904 = CARTESIAN_POINT('',(126.804334,-136.209288,1.585)); +#126905 = VECTOR('',#126906,1.); +#126906 = DIRECTION('',(0.773012970294,0.634390217262,0.)); +#126907 = FACE_BOUND('',#126908,.F.); +#126908 = EDGE_LOOP('',(#126909,#126920,#126928,#126936,#126944,#126952) + ); +#126909 = ORIENTED_EDGE('',*,*,#126910,.T.); +#126910 = EDGE_CURVE('',#126911,#126913,#126915,.T.); +#126911 = VERTEX_POINT('',#126912); +#126912 = CARTESIAN_POINT('',(127.342131,-136.345135,1.585)); +#126913 = VERTEX_POINT('',#126914); +#126914 = CARTESIAN_POINT('',(126.957869,-136.345135,1.585)); +#126915 = CIRCLE('',#126916,0.34062122266); +#126916 = AXIS2_PLACEMENT_3D('',#126917,#126918,#126919); +#126917 = CARTESIAN_POINT('',(127.15,-136.6263973262,1.585)); +#126918 = DIRECTION('',(0.,0.,1.)); +#126919 = DIRECTION('',(0.564060567041,0.825733417459,-0.)); +#126920 = ORIENTED_EDGE('',*,*,#126921,.T.); +#126921 = EDGE_CURVE('',#126913,#126922,#126924,.T.); +#126922 = VERTEX_POINT('',#126923); +#126923 = CARTESIAN_POINT('',(126.916667,-136.427541,1.585)); +#126924 = LINE('',#126925,#126926); +#126925 = CARTESIAN_POINT('',(126.957869,-136.345135,1.585)); +#126926 = VECTOR('',#126927,1.); +#126927 = DIRECTION('',(-0.44720491231,-0.894431532542,0.)); +#126928 = ORIENTED_EDGE('',*,*,#126929,.T.); +#126929 = EDGE_CURVE('',#126922,#126930,#126932,.T.); +#126930 = VERTEX_POINT('',#126931); +#126931 = CARTESIAN_POINT('',(126.916667,-136.548619,1.585)); +#126932 = LINE('',#126933,#126934); +#126933 = CARTESIAN_POINT('',(126.916667,-136.427541,1.585)); +#126934 = VECTOR('',#126935,1.); +#126935 = DIRECTION('',(0.,-1.,0.)); +#126936 = ORIENTED_EDGE('',*,*,#126937,.T.); +#126937 = EDGE_CURVE('',#126930,#126938,#126940,.T.); +#126938 = VERTEX_POINT('',#126939); +#126939 = CARTESIAN_POINT('',(127.383334,-136.455285,1.585)); +#126940 = LINE('',#126941,#126942); +#126941 = CARTESIAN_POINT('',(126.916667,-136.548619,1.585)); +#126942 = VECTOR('',#126943,1.); +#126943 = DIRECTION('',(0.980580433239,0.196117347393,0.)); +#126944 = ORIENTED_EDGE('',*,*,#126945,.T.); +#126945 = EDGE_CURVE('',#126938,#126946,#126948,.T.); +#126946 = VERTEX_POINT('',#126947); +#126947 = CARTESIAN_POINT('',(127.383334,-136.427541,1.585)); +#126948 = LINE('',#126949,#126950); +#126949 = CARTESIAN_POINT('',(127.383334,-136.455285,1.585)); +#126950 = VECTOR('',#126951,1.); +#126951 = DIRECTION('',(0.,1.,0.)); +#126952 = ORIENTED_EDGE('',*,*,#126953,.T.); +#126953 = EDGE_CURVE('',#126946,#126911,#126954,.T.); +#126954 = LINE('',#126955,#126956); +#126955 = CARTESIAN_POINT('',(127.383334,-136.427541,1.585)); +#126956 = VECTOR('',#126957,1.); +#126957 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#126958 = PLANE('',#126959); +#126959 = AXIS2_PLACEMENT_3D('',#126960,#126961,#126962); +#126960 = CARTESIAN_POINT('',(0.,0.,1.585)); +#126961 = DIRECTION('',(0.,0.,1.)); +#126962 = DIRECTION('',(1.,0.,-0.)); +#126963 = SHELL_BASED_SURFACE_MODEL('',(#126964)); +#126964 = OPEN_SHELL('',(#126965)); +#126965 = ADVANCED_FACE('',(#126966),#127180,.T.); +#126966 = FACE_BOUND('',#126967,.F.); +#126967 = EDGE_LOOP('',(#126968,#126978,#126986,#126994,#127002,#127010, + #127019,#127027,#127035,#127044,#127052,#127061,#127069,#127077, + #127086,#127094,#127102,#127110,#127118,#127126,#127134,#127142, + #127150,#127158,#127166,#127174)); +#126968 = ORIENTED_EDGE('',*,*,#126969,.T.); +#126969 = EDGE_CURVE('',#126970,#126972,#126974,.T.); +#126970 = VERTEX_POINT('',#126971); +#126971 = CARTESIAN_POINT('',(128.096884,-136.186441,1.585)); +#126972 = VERTEX_POINT('',#126973); +#126973 = CARTESIAN_POINT('',(128.256921,-136.107484,1.585)); +#126974 = LINE('',#126975,#126976); +#126975 = CARTESIAN_POINT('',(128.096884,-136.186441,1.585)); +#126976 = VECTOR('',#126977,1.); +#126977 = DIRECTION('',(0.89679384866,0.442448633183,0.)); +#126978 = ORIENTED_EDGE('',*,*,#126979,.T.); +#126979 = EDGE_CURVE('',#126972,#126980,#126982,.T.); +#126980 = VERTEX_POINT('',#126981); +#126981 = CARTESIAN_POINT('',(128.283334,-136.103933,1.585)); +#126982 = LINE('',#126983,#126984); +#126983 = CARTESIAN_POINT('',(128.256921,-136.107484,1.585)); +#126984 = VECTOR('',#126985,1.); +#126985 = DIRECTION('',(0.991083449634,0.133242620287,0.)); +#126986 = ORIENTED_EDGE('',*,*,#126987,.T.); +#126987 = EDGE_CURVE('',#126980,#126988,#126990,.T.); +#126988 = VERTEX_POINT('',#126989); +#126989 = CARTESIAN_POINT('',(128.56951,-136.105854,1.585)); +#126990 = LINE('',#126991,#126992); +#126991 = CARTESIAN_POINT('',(128.283334,-136.103933,1.585)); +#126992 = VECTOR('',#126993,1.); +#126993 = DIRECTION('',(0.999977470911,-6.712501123786E-03,0.)); +#126994 = ORIENTED_EDGE('',*,*,#126995,.T.); +#126995 = EDGE_CURVE('',#126988,#126996,#126998,.T.); +#126996 = VERTEX_POINT('',#126997); +#126997 = CARTESIAN_POINT('',(128.594723,-136.11449,1.585)); +#126998 = LINE('',#126999,#127000); +#126999 = CARTESIAN_POINT('',(128.56951,-136.105854,1.585)); +#127000 = VECTOR('',#127001,1.); +#127001 = DIRECTION('',(0.946043257817,-0.324040359121,0.)); +#127002 = ORIENTED_EDGE('',*,*,#127003,.T.); +#127003 = EDGE_CURVE('',#126996,#127004,#127006,.T.); +#127004 = VERTEX_POINT('',#127005); +#127005 = CARTESIAN_POINT('',(128.744646,-136.1916,1.585)); +#127006 = LINE('',#127007,#127008); +#127007 = CARTESIAN_POINT('',(128.594723,-136.11449,1.585)); +#127008 = VECTOR('',#127009,1.); +#127009 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#127010 = ORIENTED_EDGE('',*,*,#127011,.T.); +#127011 = EDGE_CURVE('',#127004,#127012,#127014,.T.); +#127012 = VERTEX_POINT('',#127013); +#127013 = CARTESIAN_POINT('',(128.656921,-136.367049,1.585)); +#127014 = CIRCLE('',#127015,0.100000622057); +#127015 = AXIS2_PLACEMENT_3D('',#127016,#127017,#127018); +#127016 = CARTESIAN_POINT('',(128.68333376103,-136.2705995807,1.585)); +#127017 = DIRECTION('',(0.,0.,-1.)); +#127018 = DIRECTION('',(0.613118575722,0.789990893684,0.)); +#127019 = ORIENTED_EDGE('',*,*,#127020,.T.); +#127020 = EDGE_CURVE('',#127012,#127021,#127023,.T.); +#127021 = VERTEX_POINT('',#127022); +#127022 = CARTESIAN_POINT('',(128.526393,-136.303933,1.585)); +#127023 = LINE('',#127024,#127025); +#127024 = CARTESIAN_POINT('',(128.656921,-136.367049,1.585)); +#127025 = VECTOR('',#127026,1.); +#127026 = DIRECTION('',(-0.900274715498,0.435322221618,0.)); +#127027 = ORIENTED_EDGE('',*,*,#127028,.T.); +#127028 = EDGE_CURVE('',#127021,#127029,#127031,.T.); +#127029 = VERTEX_POINT('',#127030); +#127030 = CARTESIAN_POINT('',(128.306942,-136.303933,1.585)); +#127031 = LINE('',#127032,#127033); +#127032 = CARTESIAN_POINT('',(128.526393,-136.303933,1.585)); +#127033 = VECTOR('',#127034,1.); +#127034 = DIRECTION('',(-1.,0.,0.)); +#127035 = ORIENTED_EDGE('',*,*,#127036,.T.); +#127036 = EDGE_CURVE('',#127029,#127037,#127039,.T.); +#127037 = VERTEX_POINT('',#127038); +#127038 = CARTESIAN_POINT('',(128.116667,-136.494207,1.585)); +#127039 = CIRCLE('',#127040,0.267248556225); +#127040 = AXIS2_PLACEMENT_3D('',#127041,#127042,#127043); +#127041 = CARTESIAN_POINT('',(128.37508235812,-136.5623487162,1.585)); +#127042 = DIRECTION('',(0.,0.,1.)); +#127043 = DIRECTION('',(-0.254969976573,0.966948970239,0.)); +#127044 = ORIENTED_EDGE('',*,*,#127045,.T.); +#127045 = EDGE_CURVE('',#127037,#127046,#127048,.T.); +#127046 = VERTEX_POINT('',#127047); +#127047 = CARTESIAN_POINT('',(128.116667,-136.846991,1.585)); +#127048 = LINE('',#127049,#127050); +#127049 = CARTESIAN_POINT('',(128.116667,-136.494207,1.585)); +#127050 = VECTOR('',#127051,1.); +#127051 = DIRECTION('',(0.,-1.,0.)); +#127052 = ORIENTED_EDGE('',*,*,#127053,.T.); +#127053 = EDGE_CURVE('',#127046,#127054,#127056,.T.); +#127054 = VERTEX_POINT('',#127055); +#127055 = CARTESIAN_POINT('',(128.306941,-137.037266,1.585)); +#127056 = CIRCLE('',#127057,0.267251611057); +#127057 = AXIS2_PLACEMENT_3D('',#127058,#127059,#127060); +#127058 = CARTESIAN_POINT('',(128.37508521626,-136.7788481418,1.585)); +#127059 = DIRECTION('',(0.,0.,1.)); +#127060 = DIRECTION('',(-0.966947272063,-0.254976416656,0.)); +#127061 = ORIENTED_EDGE('',*,*,#127062,.T.); +#127062 = EDGE_CURVE('',#127054,#127063,#127065,.T.); +#127063 = VERTEX_POINT('',#127064); +#127064 = CARTESIAN_POINT('',(128.526394,-137.037266,1.585)); +#127065 = LINE('',#127066,#127067); +#127066 = CARTESIAN_POINT('',(128.306941,-137.037266,1.585)); +#127067 = VECTOR('',#127068,1.); +#127068 = DIRECTION('',(1.,0.,0.)); +#127069 = ORIENTED_EDGE('',*,*,#127070,.T.); +#127070 = EDGE_CURVE('',#127063,#127071,#127073,.T.); +#127071 = VERTEX_POINT('',#127072); +#127072 = CARTESIAN_POINT('',(128.656922,-136.974151,1.585)); +#127073 = LINE('',#127074,#127075); +#127074 = CARTESIAN_POINT('',(128.526394,-137.037266,1.585)); +#127075 = VECTOR('',#127076,1.); +#127076 = DIRECTION('',(0.900277418559,0.435316631469,0.)); +#127077 = ORIENTED_EDGE('',*,*,#127078,.T.); +#127078 = EDGE_CURVE('',#127071,#127079,#127081,.T.); +#127079 = VERTEX_POINT('',#127080); +#127080 = CARTESIAN_POINT('',(128.744646,-137.1496,1.585)); +#127081 = CIRCLE('',#127082,0.100000294132); +#127082 = AXIS2_PLACEMENT_3D('',#127083,#127084,#127085); +#127083 = CARTESIAN_POINT('',(128.68333471921,-137.0706000906,1.585)); +#127084 = DIRECTION('',(0.,0.,-1.)); +#127085 = DIRECTION('',(-0.26412641526,0.964488069787,-0.)); +#127086 = ORIENTED_EDGE('',*,*,#127087,.T.); +#127087 = EDGE_CURVE('',#127079,#127088,#127090,.T.); +#127088 = VERTEX_POINT('',#127089); +#127089 = CARTESIAN_POINT('',(128.576414,-137.233715,1.585)); +#127090 = LINE('',#127091,#127092); +#127091 = CARTESIAN_POINT('',(128.744646,-137.1496,1.585)); +#127092 = VECTOR('',#127093,1.); +#127093 = DIRECTION('',(-0.894429317647,-0.447209342181,0.)); +#127094 = ORIENTED_EDGE('',*,*,#127095,.T.); +#127095 = EDGE_CURVE('',#127088,#127096,#127098,.T.); +#127096 = VERTEX_POINT('',#127097); +#127097 = CARTESIAN_POINT('',(128.550001,-137.237266,1.585)); +#127098 = LINE('',#127099,#127100); +#127099 = CARTESIAN_POINT('',(128.576414,-137.233715,1.585)); +#127100 = VECTOR('',#127101,1.); +#127101 = DIRECTION('',(-0.991083449634,-0.133242620288,0.)); +#127102 = ORIENTED_EDGE('',*,*,#127103,.T.); +#127103 = EDGE_CURVE('',#127096,#127104,#127106,.T.); +#127104 = VERTEX_POINT('',#127105); +#127105 = CARTESIAN_POINT('',(128.263825,-137.235345,1.585)); +#127106 = LINE('',#127107,#127108); +#127107 = CARTESIAN_POINT('',(128.550001,-137.237266,1.585)); +#127108 = VECTOR('',#127109,1.); +#127109 = DIRECTION('',(-0.999977470911,6.712501123886E-03,0.)); +#127110 = ORIENTED_EDGE('',*,*,#127111,.T.); +#127111 = EDGE_CURVE('',#127104,#127112,#127114,.T.); +#127112 = VERTEX_POINT('',#127113); +#127113 = CARTESIAN_POINT('',(128.238613,-137.226709,1.585)); +#127114 = LINE('',#127115,#127116); +#127115 = CARTESIAN_POINT('',(128.263825,-137.235345,1.585)); +#127116 = VECTOR('',#127117,1.); +#127117 = DIRECTION('',(-0.946039317712,0.324051862119,0.)); +#127118 = ORIENTED_EDGE('',*,*,#127119,.T.); +#127119 = EDGE_CURVE('',#127112,#127120,#127122,.T.); +#127120 = VERTEX_POINT('',#127121); +#127121 = CARTESIAN_POINT('',(128.086959,-137.147605,1.585)); +#127122 = LINE('',#127123,#127124); +#127123 = CARTESIAN_POINT('',(128.238613,-137.226709,1.585)); +#127124 = VECTOR('',#127125,1.); +#127125 = DIRECTION('',(-0.886632377277,0.462474893983,0.)); +#127126 = ORIENTED_EDGE('',*,*,#127127,.T.); +#127127 = EDGE_CURVE('',#127120,#127128,#127130,.T.); +#127128 = VERTEX_POINT('',#127129); +#127129 = CARTESIAN_POINT('',(127.999177,-137.057053,1.585)); +#127130 = LINE('',#127131,#127132); +#127131 = CARTESIAN_POINT('',(128.086959,-137.147605,1.585)); +#127132 = VECTOR('',#127133,1.); +#127133 = DIRECTION('',(-0.696039578142,0.718003416189,0.)); +#127134 = ORIENTED_EDGE('',*,*,#127135,.T.); +#127135 = EDGE_CURVE('',#127128,#127136,#127138,.T.); +#127136 = VERTEX_POINT('',#127137); +#127137 = CARTESIAN_POINT('',(127.920218,-136.897013,1.585)); +#127138 = LINE('',#127139,#127140); +#127139 = CARTESIAN_POINT('',(127.999177,-137.057053,1.585)); +#127140 = VECTOR('',#127141,1.); +#127141 = DIRECTION('',(-0.442450976154,0.896792692711,0.)); +#127142 = ORIENTED_EDGE('',*,*,#127143,.T.); +#127143 = EDGE_CURVE('',#127136,#127144,#127146,.T.); +#127144 = VERTEX_POINT('',#127145); +#127145 = CARTESIAN_POINT('',(127.916667,-136.8706,1.585)); +#127146 = LINE('',#127147,#127148); +#127147 = CARTESIAN_POINT('',(127.920218,-136.897013,1.585)); +#127148 = VECTOR('',#127149,1.); +#127149 = DIRECTION('',(-0.133242620288,0.991083449634,0.)); +#127150 = ORIENTED_EDGE('',*,*,#127151,.T.); +#127151 = EDGE_CURVE('',#127144,#127152,#127154,.T.); +#127152 = VERTEX_POINT('',#127153); +#127153 = CARTESIAN_POINT('',(127.918588,-136.451091,1.585)); +#127154 = LINE('',#127155,#127156); +#127155 = CARTESIAN_POINT('',(127.916667,-136.8706,1.585)); +#127156 = VECTOR('',#127157,1.); +#127157 = DIRECTION('',(4.579114774285E-03,0.999989515799,0.)); +#127158 = ORIENTED_EDGE('',*,*,#127159,.T.); +#127159 = EDGE_CURVE('',#127152,#127160,#127162,.T.); +#127160 = VERTEX_POINT('',#127161); +#127161 = CARTESIAN_POINT('',(127.927224,-136.425879,1.585)); +#127162 = LINE('',#127163,#127164); +#127163 = CARTESIAN_POINT('',(127.918588,-136.451091,1.585)); +#127164 = VECTOR('',#127165,1.); +#127165 = DIRECTION('',(0.32405186212,0.946039317712,0.)); +#127166 = ORIENTED_EDGE('',*,*,#127167,.T.); +#127167 = EDGE_CURVE('',#127160,#127168,#127170,.T.); +#127168 = VERTEX_POINT('',#127169); +#127169 = CARTESIAN_POINT('',(128.006331,-136.274221,1.585)); +#127170 = LINE('',#127171,#127172); +#127171 = CARTESIAN_POINT('',(127.927224,-136.425879,1.585)); +#127172 = VECTOR('',#127173,1.); +#127173 = DIRECTION('',(0.462479092578,0.886630187242,0.)); +#127174 = ORIENTED_EDGE('',*,*,#127175,.T.); +#127175 = EDGE_CURVE('',#127168,#126970,#127176,.T.); +#127176 = LINE('',#127177,#127178); +#127177 = CARTESIAN_POINT('',(128.006331,-136.274221,1.585)); +#127178 = VECTOR('',#127179,1.); +#127179 = DIRECTION('',(0.718015182968,0.696027439852,0.)); +#127180 = PLANE('',#127181); +#127181 = AXIS2_PLACEMENT_3D('',#127182,#127183,#127184); +#127182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127183 = DIRECTION('',(0.,0.,1.)); +#127184 = DIRECTION('',(1.,0.,-0.)); +#127185 = SHELL_BASED_SURFACE_MODEL('',(#127186)); +#127186 = OPEN_SHELL('',(#127187)); +#127187 = ADVANCED_FACE('',(#127188),#127307,.T.); +#127188 = FACE_BOUND('',#127189,.F.); +#127189 = EDGE_LOOP('',(#127190,#127201,#127209,#127218,#127226,#127234, + #127243,#127251,#127260,#127268,#127276,#127285,#127293,#127301)); +#127190 = ORIENTED_EDGE('',*,*,#127191,.T.); +#127191 = EDGE_CURVE('',#127192,#127194,#127196,.T.); +#127192 = VERTEX_POINT('',#127193); +#127193 = CARTESIAN_POINT('',(114.285313,-136.127671,1.585)); +#127194 = VERTEX_POINT('',#127195); +#127195 = CARTESIAN_POINT('',(114.449663,-136.212119,1.585)); +#127196 = CIRCLE('',#127197,0.100000186139); +#127197 = AXIS2_PLACEMENT_3D('',#127198,#127199,#127200); +#127198 = CARTESIAN_POINT('',(114.34999846424,-136.2039325757,1.585)); +#127199 = DIRECTION('',(0.,0.,-1.)); +#127200 = DIRECTION('',(-0.64685343843,0.762614338438,0.)); +#127201 = ORIENTED_EDGE('',*,*,#127202,.T.); +#127202 = EDGE_CURVE('',#127194,#127203,#127205,.T.); +#127203 = VERTEX_POINT('',#127204); +#127204 = CARTESIAN_POINT('',(114.172278,-137.182969,1.585)); +#127205 = LINE('',#127206,#127207); +#127206 = CARTESIAN_POINT('',(114.449663,-136.212119,1.585)); +#127207 = VECTOR('',#127208,1.); +#127208 = DIRECTION('',(-0.274720473863,-0.961524134507,0.)); +#127209 = ORIENTED_EDGE('',*,*,#127210,.T.); +#127210 = EDGE_CURVE('',#127203,#127211,#127213,.T.); +#127211 = VERTEX_POINT('',#127212); +#127212 = CARTESIAN_POINT('',(113.999513,-137.191805,1.585)); +#127213 = CIRCLE('',#127214,0.100001498435); +#127214 = AXIS2_PLACEMENT_3D('',#127215,#127216,#127217); +#127215 = CARTESIAN_POINT('',(114.08333199972,-137.137264419,1.585)); +#127216 = DIRECTION('',(-0.,0.,-1.)); +#127217 = DIRECTION('',(0.889446675006,-0.457038961492,-0.)); +#127218 = ORIENTED_EDGE('',*,*,#127219,.T.); +#127219 = EDGE_CURVE('',#127211,#127220,#127222,.T.); +#127220 = VERTEX_POINT('',#127221); +#127221 = CARTESIAN_POINT('',(113.816664,-136.739857,1.585)); +#127222 = LINE('',#127223,#127224); +#127223 = CARTESIAN_POINT('',(113.999513,-137.191805,1.585)); +#127224 = VECTOR('',#127225,1.); +#127225 = DIRECTION('',(-0.375047649202,0.927005534411,0.)); +#127226 = ORIENTED_EDGE('',*,*,#127227,.T.); +#127227 = EDGE_CURVE('',#127220,#127228,#127230,.T.); +#127228 = VERTEX_POINT('',#127229); +#127229 = CARTESIAN_POINT('',(113.633817,-137.191805,1.585)); +#127230 = LINE('',#127231,#127232); +#127231 = CARTESIAN_POINT('',(113.816664,-136.739857,1.585)); +#127232 = VECTOR('',#127233,1.); +#127233 = DIRECTION('',(-0.375044123955,-0.927006960646,0.)); +#127234 = ORIENTED_EDGE('',*,*,#127235,.T.); +#127235 = EDGE_CURVE('',#127228,#127236,#127238,.T.); +#127236 = VERTEX_POINT('',#127237); +#127237 = CARTESIAN_POINT('',(113.461052,-137.182969,1.585)); +#127238 = CIRCLE('',#127239,0.100000789337); +#127239 = AXIS2_PLACEMENT_3D('',#127240,#127241,#127242); +#127240 = CARTESIAN_POINT('',(113.54999792811,-137.13726583,1.585)); +#127241 = DIRECTION('',(-0.,0.,-1.)); +#127242 = DIRECTION('',(0.838184102806,-0.545387394247,-0.)); +#127243 = ORIENTED_EDGE('',*,*,#127244,.T.); +#127244 = EDGE_CURVE('',#127236,#127245,#127247,.T.); +#127245 = VERTEX_POINT('',#127246); +#127246 = CARTESIAN_POINT('',(113.183667,-136.212119,1.585)); +#127247 = LINE('',#127248,#127249); +#127248 = CARTESIAN_POINT('',(113.461052,-137.182969,1.585)); +#127249 = VECTOR('',#127250,1.); +#127250 = DIRECTION('',(-0.274720473863,0.961524134507,0.)); +#127251 = ORIENTED_EDGE('',*,*,#127252,.T.); +#127252 = EDGE_CURVE('',#127245,#127253,#127255,.T.); +#127253 = VERTEX_POINT('',#127254); +#127254 = CARTESIAN_POINT('',(113.372278,-136.15823,1.585)); +#127255 = CIRCLE('',#127256,0.100000670821); +#127256 = AXIS2_PLACEMENT_3D('',#127257,#127258,#127259); +#127257 = CARTESIAN_POINT('',(113.28333204531,-136.2039328588,1.585)); +#127258 = DIRECTION('',(0.,0.,-1.)); +#127259 = DIRECTION('',(-0.996643767489,-8.186086198219E-02,-0.)); +#127260 = ORIENTED_EDGE('',*,*,#127261,.T.); +#127261 = EDGE_CURVE('',#127253,#127262,#127264,.T.); +#127262 = VERTEX_POINT('',#127263); +#127263 = CARTESIAN_POINT('',(113.565789,-136.82853,1.585)); +#127264 = LINE('',#127265,#127266); +#127265 = CARTESIAN_POINT('',(113.372278,-136.15823,1.585)); +#127266 = VECTOR('',#127267,1.); +#127267 = DIRECTION('',(0.277366050801,-0.960764317543,0.)); +#127268 = ORIENTED_EDGE('',*,*,#127269,.T.); +#127269 = EDGE_CURVE('',#127262,#127270,#127272,.T.); +#127270 = VERTEX_POINT('',#127271); +#127271 = CARTESIAN_POINT('',(113.734202,-136.414033,1.585)); +#127272 = LINE('',#127273,#127274); +#127273 = CARTESIAN_POINT('',(113.565789,-136.82853,1.585)); +#127274 = VECTOR('',#127275,1.); +#127275 = DIRECTION('',(0.376422310851,0.926448187377,0.)); +#127276 = ORIENTED_EDGE('',*,*,#127277,.T.); +#127277 = EDGE_CURVE('',#127270,#127278,#127280,.T.); +#127278 = VERTEX_POINT('',#127279); +#127279 = CARTESIAN_POINT('',(113.900484,-136.416061,1.585)); +#127280 = CIRCLE('',#127281,9.999924111413E-02); +#127281 = AXIS2_PLACEMENT_3D('',#127282,#127283,#127284); +#127282 = CARTESIAN_POINT('',(113.81666548938,-136.4705981937,1.585)); +#127283 = DIRECTION('',(0.,0.,-1.)); +#127284 = DIRECTION('',(-0.824641151886,0.565656230069,0.)); +#127285 = ORIENTED_EDGE('',*,*,#127286,.T.); +#127286 = EDGE_CURVE('',#127278,#127287,#127289,.T.); +#127287 = VERTEX_POINT('',#127288); +#127288 = CARTESIAN_POINT('',(114.06754,-136.82853,1.585)); +#127289 = LINE('',#127290,#127291); +#127290 = CARTESIAN_POINT('',(113.900484,-136.416061,1.585)); +#127291 = VECTOR('',#127292,1.); +#127292 = DIRECTION('',(0.375394056684,-0.926865309636,0.)); +#127293 = ORIENTED_EDGE('',*,*,#127294,.T.); +#127294 = EDGE_CURVE('',#127287,#127295,#127297,.T.); +#127295 = VERTEX_POINT('',#127296); +#127296 = CARTESIAN_POINT('',(114.261052,-136.15823,1.585)); +#127297 = LINE('',#127298,#127299); +#127298 = CARTESIAN_POINT('',(114.06754,-136.82853,1.585)); +#127299 = VECTOR('',#127300,1.); +#127300 = DIRECTION('',(0.277367373866,0.960763935582,0.)); +#127301 = ORIENTED_EDGE('',*,*,#127302,.T.); +#127302 = EDGE_CURVE('',#127295,#127192,#127303,.T.); +#127303 = LINE('',#127304,#127305); +#127304 = CARTESIAN_POINT('',(114.261052,-136.15823,1.585)); +#127305 = VECTOR('',#127306,1.); +#127306 = DIRECTION('',(0.621780901151,0.783191235245,0.)); +#127307 = PLANE('',#127308); +#127308 = AXIS2_PLACEMENT_3D('',#127309,#127310,#127311); +#127309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127310 = DIRECTION('',(0.,0.,1.)); +#127311 = DIRECTION('',(1.,0.,-0.)); +#127312 = SHELL_BASED_SURFACE_MODEL('',(#127313)); +#127313 = OPEN_SHELL('',(#127314)); +#127314 = ADVANCED_FACE('',(#127315),#127434,.T.); +#127315 = FACE_BOUND('',#127316,.F.); +#127316 = EDGE_LOOP('',(#127317,#127328,#127336,#127345,#127353,#127361, + #127370,#127378,#127387,#127395,#127403,#127412,#127420,#127428)); +#127317 = ORIENTED_EDGE('',*,*,#127318,.T.); +#127318 = EDGE_CURVE('',#127319,#127321,#127323,.T.); +#127319 = VERTEX_POINT('',#127320); +#127320 = CARTESIAN_POINT('',(115.75198,-136.127671,1.585)); +#127321 = VERTEX_POINT('',#127322); +#127322 = CARTESIAN_POINT('',(115.91633,-136.212119,1.585)); +#127323 = CIRCLE('',#127324,0.100000186139); +#127324 = AXIS2_PLACEMENT_3D('',#127325,#127326,#127327); +#127325 = CARTESIAN_POINT('',(115.81666546424,-136.2039325757,1.585)); +#127326 = DIRECTION('',(0.,0.,-1.)); +#127327 = DIRECTION('',(-0.64685343843,0.762614338438,0.)); +#127328 = ORIENTED_EDGE('',*,*,#127329,.T.); +#127329 = EDGE_CURVE('',#127321,#127330,#127332,.T.); +#127330 = VERTEX_POINT('',#127331); +#127331 = CARTESIAN_POINT('',(115.638945,-137.182969,1.585)); +#127332 = LINE('',#127333,#127334); +#127333 = CARTESIAN_POINT('',(115.91633,-136.212119,1.585)); +#127334 = VECTOR('',#127335,1.); +#127335 = DIRECTION('',(-0.274720473863,-0.961524134507,0.)); +#127336 = ORIENTED_EDGE('',*,*,#127337,.T.); +#127337 = EDGE_CURVE('',#127330,#127338,#127340,.T.); +#127338 = VERTEX_POINT('',#127339); +#127339 = CARTESIAN_POINT('',(115.46618,-137.191805,1.585)); +#127340 = CIRCLE('',#127341,0.100001498435); +#127341 = AXIS2_PLACEMENT_3D('',#127342,#127343,#127344); +#127342 = CARTESIAN_POINT('',(115.54999899972,-137.137264419,1.585)); +#127343 = DIRECTION('',(-0.,0.,-1.)); +#127344 = DIRECTION('',(0.889446675006,-0.457038961492,-0.)); +#127345 = ORIENTED_EDGE('',*,*,#127346,.T.); +#127346 = EDGE_CURVE('',#127338,#127347,#127349,.T.); +#127347 = VERTEX_POINT('',#127348); +#127348 = CARTESIAN_POINT('',(115.283331,-136.739857,1.585)); +#127349 = LINE('',#127350,#127351); +#127350 = CARTESIAN_POINT('',(115.46618,-137.191805,1.585)); +#127351 = VECTOR('',#127352,1.); +#127352 = DIRECTION('',(-0.375047649202,0.927005534411,0.)); +#127353 = ORIENTED_EDGE('',*,*,#127354,.T.); +#127354 = EDGE_CURVE('',#127347,#127355,#127357,.T.); +#127355 = VERTEX_POINT('',#127356); +#127356 = CARTESIAN_POINT('',(115.100484,-137.191805,1.585)); +#127357 = LINE('',#127358,#127359); +#127358 = CARTESIAN_POINT('',(115.283331,-136.739857,1.585)); +#127359 = VECTOR('',#127360,1.); +#127360 = DIRECTION('',(-0.375044123955,-0.927006960646,0.)); +#127361 = ORIENTED_EDGE('',*,*,#127362,.T.); +#127362 = EDGE_CURVE('',#127355,#127363,#127365,.T.); +#127363 = VERTEX_POINT('',#127364); +#127364 = CARTESIAN_POINT('',(114.927719,-137.182969,1.585)); +#127365 = CIRCLE('',#127366,0.100000789337); +#127366 = AXIS2_PLACEMENT_3D('',#127367,#127368,#127369); +#127367 = CARTESIAN_POINT('',(115.01666492811,-137.13726583,1.585)); +#127368 = DIRECTION('',(-0.,0.,-1.)); +#127369 = DIRECTION('',(0.838184102806,-0.545387394247,-0.)); +#127370 = ORIENTED_EDGE('',*,*,#127371,.T.); +#127371 = EDGE_CURVE('',#127363,#127372,#127374,.T.); +#127372 = VERTEX_POINT('',#127373); +#127373 = CARTESIAN_POINT('',(114.650334,-136.212119,1.585)); +#127374 = LINE('',#127375,#127376); +#127375 = CARTESIAN_POINT('',(114.927719,-137.182969,1.585)); +#127376 = VECTOR('',#127377,1.); +#127377 = DIRECTION('',(-0.274720473863,0.961524134507,0.)); +#127378 = ORIENTED_EDGE('',*,*,#127379,.T.); +#127379 = EDGE_CURVE('',#127372,#127380,#127382,.T.); +#127380 = VERTEX_POINT('',#127381); +#127381 = CARTESIAN_POINT('',(114.838945,-136.15823,1.585)); +#127382 = CIRCLE('',#127383,0.100000670821); +#127383 = AXIS2_PLACEMENT_3D('',#127384,#127385,#127386); +#127384 = CARTESIAN_POINT('',(114.74999904531,-136.2039328588,1.585)); +#127385 = DIRECTION('',(0.,0.,-1.)); +#127386 = DIRECTION('',(-0.996643767489,-8.186086198219E-02,-0.)); +#127387 = ORIENTED_EDGE('',*,*,#127388,.T.); +#127388 = EDGE_CURVE('',#127380,#127389,#127391,.T.); +#127389 = VERTEX_POINT('',#127390); +#127390 = CARTESIAN_POINT('',(115.032456,-136.82853,1.585)); +#127391 = LINE('',#127392,#127393); +#127392 = CARTESIAN_POINT('',(114.838945,-136.15823,1.585)); +#127393 = VECTOR('',#127394,1.); +#127394 = DIRECTION('',(0.277366050801,-0.960764317543,0.)); +#127395 = ORIENTED_EDGE('',*,*,#127396,.T.); +#127396 = EDGE_CURVE('',#127389,#127397,#127399,.T.); +#127397 = VERTEX_POINT('',#127398); +#127398 = CARTESIAN_POINT('',(115.200869,-136.414033,1.585)); +#127399 = LINE('',#127400,#127401); +#127400 = CARTESIAN_POINT('',(115.032456,-136.82853,1.585)); +#127401 = VECTOR('',#127402,1.); +#127402 = DIRECTION('',(0.376422310851,0.926448187377,0.)); +#127403 = ORIENTED_EDGE('',*,*,#127404,.T.); +#127404 = EDGE_CURVE('',#127397,#127405,#127407,.T.); +#127405 = VERTEX_POINT('',#127406); +#127406 = CARTESIAN_POINT('',(115.367151,-136.416061,1.585)); +#127407 = CIRCLE('',#127408,9.999924111413E-02); +#127408 = AXIS2_PLACEMENT_3D('',#127409,#127410,#127411); +#127409 = CARTESIAN_POINT('',(115.28333248938,-136.4705981937,1.585)); +#127410 = DIRECTION('',(0.,0.,-1.)); +#127411 = DIRECTION('',(-0.824641151886,0.565656230069,0.)); +#127412 = ORIENTED_EDGE('',*,*,#127413,.T.); +#127413 = EDGE_CURVE('',#127405,#127414,#127416,.T.); +#127414 = VERTEX_POINT('',#127415); +#127415 = CARTESIAN_POINT('',(115.534207,-136.82853,1.585)); +#127416 = LINE('',#127417,#127418); +#127417 = CARTESIAN_POINT('',(115.367151,-136.416061,1.585)); +#127418 = VECTOR('',#127419,1.); +#127419 = DIRECTION('',(0.375394056684,-0.926865309636,0.)); +#127420 = ORIENTED_EDGE('',*,*,#127421,.T.); +#127421 = EDGE_CURVE('',#127414,#127422,#127424,.T.); +#127422 = VERTEX_POINT('',#127423); +#127423 = CARTESIAN_POINT('',(115.727719,-136.15823,1.585)); +#127424 = LINE('',#127425,#127426); +#127425 = CARTESIAN_POINT('',(115.534207,-136.82853,1.585)); +#127426 = VECTOR('',#127427,1.); +#127427 = DIRECTION('',(0.277367373866,0.960763935582,0.)); +#127428 = ORIENTED_EDGE('',*,*,#127429,.T.); +#127429 = EDGE_CURVE('',#127422,#127319,#127430,.T.); +#127430 = LINE('',#127431,#127432); +#127431 = CARTESIAN_POINT('',(115.727719,-136.15823,1.585)); +#127432 = VECTOR('',#127433,1.); +#127433 = DIRECTION('',(0.621780901151,0.783191235245,0.)); +#127434 = PLANE('',#127435); +#127435 = AXIS2_PLACEMENT_3D('',#127436,#127437,#127438); +#127436 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127437 = DIRECTION('',(0.,0.,1.)); +#127438 = DIRECTION('',(1.,0.,-0.)); +#127439 = SHELL_BASED_SURFACE_MODEL('',(#127440)); +#127440 = OPEN_SHELL('',(#127441)); +#127441 = ADVANCED_FACE('',(#127442),#127561,.T.); +#127442 = FACE_BOUND('',#127443,.F.); +#127443 = EDGE_LOOP('',(#127444,#127455,#127463,#127472,#127480,#127488, + #127497,#127505,#127514,#127522,#127530,#127539,#127547,#127555)); +#127444 = ORIENTED_EDGE('',*,*,#127445,.T.); +#127445 = EDGE_CURVE('',#127446,#127448,#127450,.T.); +#127446 = VERTEX_POINT('',#127447); +#127447 = CARTESIAN_POINT('',(117.218647,-136.127671,1.585)); +#127448 = VERTEX_POINT('',#127449); +#127449 = CARTESIAN_POINT('',(117.382997,-136.212119,1.585)); +#127450 = CIRCLE('',#127451,0.100000186139); +#127451 = AXIS2_PLACEMENT_3D('',#127452,#127453,#127454); +#127452 = CARTESIAN_POINT('',(117.28333246424,-136.2039325757,1.585)); +#127453 = DIRECTION('',(0.,0.,-1.)); +#127454 = DIRECTION('',(-0.64685343843,0.762614338438,0.)); +#127455 = ORIENTED_EDGE('',*,*,#127456,.T.); +#127456 = EDGE_CURVE('',#127448,#127457,#127459,.T.); +#127457 = VERTEX_POINT('',#127458); +#127458 = CARTESIAN_POINT('',(117.105612,-137.182969,1.585)); +#127459 = LINE('',#127460,#127461); +#127460 = CARTESIAN_POINT('',(117.382997,-136.212119,1.585)); +#127461 = VECTOR('',#127462,1.); +#127462 = DIRECTION('',(-0.274720473863,-0.961524134507,0.)); +#127463 = ORIENTED_EDGE('',*,*,#127464,.T.); +#127464 = EDGE_CURVE('',#127457,#127465,#127467,.T.); +#127465 = VERTEX_POINT('',#127466); +#127466 = CARTESIAN_POINT('',(116.932847,-137.191805,1.585)); +#127467 = CIRCLE('',#127468,0.100001498435); +#127468 = AXIS2_PLACEMENT_3D('',#127469,#127470,#127471); +#127469 = CARTESIAN_POINT('',(117.01666599972,-137.137264419,1.585)); +#127470 = DIRECTION('',(-0.,0.,-1.)); +#127471 = DIRECTION('',(0.889446675006,-0.457038961492,-0.)); +#127472 = ORIENTED_EDGE('',*,*,#127473,.T.); +#127473 = EDGE_CURVE('',#127465,#127474,#127476,.T.); +#127474 = VERTEX_POINT('',#127475); +#127475 = CARTESIAN_POINT('',(116.749998,-136.739857,1.585)); +#127476 = LINE('',#127477,#127478); +#127477 = CARTESIAN_POINT('',(116.932847,-137.191805,1.585)); +#127478 = VECTOR('',#127479,1.); +#127479 = DIRECTION('',(-0.375047649202,0.927005534411,0.)); +#127480 = ORIENTED_EDGE('',*,*,#127481,.T.); +#127481 = EDGE_CURVE('',#127474,#127482,#127484,.T.); +#127482 = VERTEX_POINT('',#127483); +#127483 = CARTESIAN_POINT('',(116.567151,-137.191805,1.585)); +#127484 = LINE('',#127485,#127486); +#127485 = CARTESIAN_POINT('',(116.749998,-136.739857,1.585)); +#127486 = VECTOR('',#127487,1.); +#127487 = DIRECTION('',(-0.375044123955,-0.927006960646,0.)); +#127488 = ORIENTED_EDGE('',*,*,#127489,.T.); +#127489 = EDGE_CURVE('',#127482,#127490,#127492,.T.); +#127490 = VERTEX_POINT('',#127491); +#127491 = CARTESIAN_POINT('',(116.394386,-137.182969,1.585)); +#127492 = CIRCLE('',#127493,0.100000789337); +#127493 = AXIS2_PLACEMENT_3D('',#127494,#127495,#127496); +#127494 = CARTESIAN_POINT('',(116.48333192811,-137.13726583,1.585)); +#127495 = DIRECTION('',(-0.,0.,-1.)); +#127496 = DIRECTION('',(0.838184102806,-0.545387394247,-0.)); +#127497 = ORIENTED_EDGE('',*,*,#127498,.T.); +#127498 = EDGE_CURVE('',#127490,#127499,#127501,.T.); +#127499 = VERTEX_POINT('',#127500); +#127500 = CARTESIAN_POINT('',(116.117001,-136.212119,1.585)); +#127501 = LINE('',#127502,#127503); +#127502 = CARTESIAN_POINT('',(116.394386,-137.182969,1.585)); +#127503 = VECTOR('',#127504,1.); +#127504 = DIRECTION('',(-0.274720473863,0.961524134507,0.)); +#127505 = ORIENTED_EDGE('',*,*,#127506,.T.); +#127506 = EDGE_CURVE('',#127499,#127507,#127509,.T.); +#127507 = VERTEX_POINT('',#127508); +#127508 = CARTESIAN_POINT('',(116.305612,-136.15823,1.585)); +#127509 = CIRCLE('',#127510,0.100000670821); +#127510 = AXIS2_PLACEMENT_3D('',#127511,#127512,#127513); +#127511 = CARTESIAN_POINT('',(116.21666604531,-136.2039328588,1.585)); +#127512 = DIRECTION('',(0.,0.,-1.)); +#127513 = DIRECTION('',(-0.996643767489,-8.186086198219E-02,-0.)); +#127514 = ORIENTED_EDGE('',*,*,#127515,.T.); +#127515 = EDGE_CURVE('',#127507,#127516,#127518,.T.); +#127516 = VERTEX_POINT('',#127517); +#127517 = CARTESIAN_POINT('',(116.499123,-136.82853,1.585)); +#127518 = LINE('',#127519,#127520); +#127519 = CARTESIAN_POINT('',(116.305612,-136.15823,1.585)); +#127520 = VECTOR('',#127521,1.); +#127521 = DIRECTION('',(0.277366050801,-0.960764317543,0.)); +#127522 = ORIENTED_EDGE('',*,*,#127523,.T.); +#127523 = EDGE_CURVE('',#127516,#127524,#127526,.T.); +#127524 = VERTEX_POINT('',#127525); +#127525 = CARTESIAN_POINT('',(116.667536,-136.414033,1.585)); +#127526 = LINE('',#127527,#127528); +#127527 = CARTESIAN_POINT('',(116.499123,-136.82853,1.585)); +#127528 = VECTOR('',#127529,1.); +#127529 = DIRECTION('',(0.376422310851,0.926448187377,0.)); +#127530 = ORIENTED_EDGE('',*,*,#127531,.T.); +#127531 = EDGE_CURVE('',#127524,#127532,#127534,.T.); +#127532 = VERTEX_POINT('',#127533); +#127533 = CARTESIAN_POINT('',(116.833818,-136.416061,1.585)); +#127534 = CIRCLE('',#127535,9.999924111411E-02); +#127535 = AXIS2_PLACEMENT_3D('',#127536,#127537,#127538); +#127536 = CARTESIAN_POINT('',(116.74999948938,-136.4705981937,1.585)); +#127537 = DIRECTION('',(0.,0.,-1.)); +#127538 = DIRECTION('',(-0.824641151886,0.565656230069,0.)); +#127539 = ORIENTED_EDGE('',*,*,#127540,.T.); +#127540 = EDGE_CURVE('',#127532,#127541,#127543,.T.); +#127541 = VERTEX_POINT('',#127542); +#127542 = CARTESIAN_POINT('',(117.000874,-136.82853,1.585)); +#127543 = LINE('',#127544,#127545); +#127544 = CARTESIAN_POINT('',(116.833818,-136.416061,1.585)); +#127545 = VECTOR('',#127546,1.); +#127546 = DIRECTION('',(0.375394056684,-0.926865309636,0.)); +#127547 = ORIENTED_EDGE('',*,*,#127548,.T.); +#127548 = EDGE_CURVE('',#127541,#127549,#127551,.T.); +#127549 = VERTEX_POINT('',#127550); +#127550 = CARTESIAN_POINT('',(117.194386,-136.15823,1.585)); +#127551 = LINE('',#127552,#127553); +#127552 = CARTESIAN_POINT('',(117.000874,-136.82853,1.585)); +#127553 = VECTOR('',#127554,1.); +#127554 = DIRECTION('',(0.277367373866,0.960763935582,0.)); +#127555 = ORIENTED_EDGE('',*,*,#127556,.T.); +#127556 = EDGE_CURVE('',#127549,#127446,#127557,.T.); +#127557 = LINE('',#127558,#127559); +#127558 = CARTESIAN_POINT('',(117.194386,-136.15823,1.585)); +#127559 = VECTOR('',#127560,1.); +#127560 = DIRECTION('',(0.621780901151,0.783191235245,0.)); +#127561 = PLANE('',#127562); +#127562 = AXIS2_PLACEMENT_3D('',#127563,#127564,#127565); +#127563 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127564 = DIRECTION('',(0.,0.,1.)); +#127565 = DIRECTION('',(1.,0.,-0.)); +#127566 = SHELL_BASED_SURFACE_MODEL('',(#127567)); +#127567 = OPEN_SHELL('',(#127568)); +#127568 = ADVANCED_FACE('',(#127569),#127669,.T.); +#127569 = FACE_BOUND('',#127570,.F.); +#127570 = EDGE_LOOP('',(#127571,#127582,#127590,#127598,#127606,#127615, + #127623,#127631,#127639,#127647,#127655,#127663)); +#127571 = ORIENTED_EDGE('',*,*,#127572,.T.); +#127572 = EDGE_CURVE('',#127573,#127575,#127577,.T.); +#127573 = VERTEX_POINT('',#127574); +#127574 = CARTESIAN_POINT('',(120.894443,-135.654119,1.585)); +#127575 = VERTEX_POINT('',#127576); +#127576 = CARTESIAN_POINT('',(121.048079,-135.717757,1.585)); +#127577 = CIRCLE('',#127578,0.100000590676); +#127578 = AXIS2_PLACEMENT_3D('',#127579,#127580,#127581); +#127579 = CARTESIAN_POINT('',(120.95,-135.7372666872,1.585)); +#127580 = DIRECTION('',(0.,0.,-1.)); +#127581 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#127582 = ORIENTED_EDGE('',*,*,#127583,.T.); +#127583 = EDGE_CURVE('',#127575,#127584,#127586,.T.); +#127584 = VERTEX_POINT('',#127585); +#127585 = CARTESIAN_POINT('',(121.05,-136.913659,1.585)); +#127586 = LINE('',#127587,#127588); +#127587 = CARTESIAN_POINT('',(121.048079,-135.717757,1.585)); +#127588 = VECTOR('',#127589,1.); +#127589 = DIRECTION('',(1.606316840059E-03,-0.999998709872,0.)); +#127590 = ORIENTED_EDGE('',*,*,#127591,.T.); +#127591 = EDGE_CURVE('',#127584,#127592,#127594,.T.); +#127592 = VERTEX_POINT('',#127593); +#127593 = CARTESIAN_POINT('',(121.091202,-136.996064,1.585)); +#127594 = LINE('',#127595,#127596); +#127595 = CARTESIAN_POINT('',(121.05,-136.913659,1.585)); +#127596 = VECTOR('',#127597,1.); +#127597 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#127598 = ORIENTED_EDGE('',*,*,#127599,.T.); +#127599 = EDGE_CURVE('',#127592,#127600,#127602,.T.); +#127600 = VERTEX_POINT('',#127601); +#127601 = CARTESIAN_POINT('',(121.211312,-137.058266,1.585)); +#127602 = LINE('',#127603,#127604); +#127603 = CARTESIAN_POINT('',(121.091202,-136.996064,1.585)); +#127604 = VECTOR('',#127605,1.); +#127605 = DIRECTION('',(0.887987832152,-0.459866948094,0.)); +#127606 = ORIENTED_EDGE('',*,*,#127607,.T.); +#127607 = EDGE_CURVE('',#127600,#127608,#127610,.T.); +#127608 = VERTEX_POINT('',#127609); +#127609 = CARTESIAN_POINT('',(121.123588,-137.233715,1.585)); +#127610 = CIRCLE('',#127611,0.100000224242); +#127611 = AXIS2_PLACEMENT_3D('',#127612,#127613,#127614); +#127612 = CARTESIAN_POINT('',(121.15000103964,-137.1372660695,1.585)); +#127613 = DIRECTION('',(0.,0.,-1.)); +#127614 = DIRECTION('',(0.613108228697,0.789998923989,0.)); +#127615 = ORIENTED_EDGE('',*,*,#127616,.T.); +#127616 = EDGE_CURVE('',#127608,#127617,#127619,.T.); +#127617 = VERTEX_POINT('',#127618); +#127618 = CARTESIAN_POINT('',(120.955356,-137.1496,1.585)); +#127619 = LINE('',#127620,#127621); +#127620 = CARTESIAN_POINT('',(121.123588,-137.233715,1.585)); +#127621 = VECTOR('',#127622,1.); +#127622 = DIRECTION('',(-0.894429317647,0.447209342181,0.)); +#127623 = ORIENTED_EDGE('',*,*,#127624,.T.); +#127624 = EDGE_CURVE('',#127617,#127625,#127627,.T.); +#127625 = VERTEX_POINT('',#127626); +#127626 = CARTESIAN_POINT('',(120.927224,-137.115321,1.585)); +#127627 = LINE('',#127628,#127629); +#127628 = CARTESIAN_POINT('',(120.955356,-137.1496,1.585)); +#127629 = VECTOR('',#127630,1.); +#127630 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#127631 = ORIENTED_EDGE('',*,*,#127632,.T.); +#127632 = EDGE_CURVE('',#127625,#127633,#127635,.T.); +#127633 = VERTEX_POINT('',#127634); +#127634 = CARTESIAN_POINT('',(120.853296,-136.960095,1.585)); +#127635 = LINE('',#127636,#127637); +#127636 = CARTESIAN_POINT('',(120.927224,-137.115321,1.585)); +#127637 = VECTOR('',#127638,1.); +#127638 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#127639 = ORIENTED_EDGE('',*,*,#127640,.T.); +#127640 = EDGE_CURVE('',#127633,#127641,#127643,.T.); +#127641 = VERTEX_POINT('',#127642); +#127642 = CARTESIAN_POINT('',(120.85,-136.937266,1.585)); +#127643 = LINE('',#127644,#127645); +#127644 = CARTESIAN_POINT('',(120.853296,-136.960095,1.585)); +#127645 = VECTOR('',#127646,1.); +#127646 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#127647 = ORIENTED_EDGE('',*,*,#127648,.T.); +#127648 = EDGE_CURVE('',#127641,#127649,#127651,.T.); +#127649 = VERTEX_POINT('',#127650); +#127650 = CARTESIAN_POINT('',(120.851921,-135.717757,1.585)); +#127651 = LINE('',#127652,#127653); +#127652 = CARTESIAN_POINT('',(120.85,-136.937266,1.585)); +#127653 = VECTOR('',#127654,1.); +#127654 = DIRECTION('',(1.575222172773E-03,0.999998759337,0.)); +#127655 = ORIENTED_EDGE('',*,*,#127656,.T.); +#127656 = EDGE_CURVE('',#127649,#127657,#127659,.T.); +#127657 = VERTEX_POINT('',#127658); +#127658 = CARTESIAN_POINT('',(120.866853,-135.681709,1.585)); +#127659 = LINE('',#127660,#127661); +#127660 = CARTESIAN_POINT('',(120.851921,-135.717757,1.585)); +#127661 = VECTOR('',#127662,1.); +#127662 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#127663 = ORIENTED_EDGE('',*,*,#127664,.T.); +#127664 = EDGE_CURVE('',#127657,#127573,#127665,.T.); +#127665 = LINE('',#127666,#127667); +#127666 = CARTESIAN_POINT('',(120.866853,-135.681709,1.585)); +#127667 = VECTOR('',#127668,1.); +#127668 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#127669 = PLANE('',#127670); +#127670 = AXIS2_PLACEMENT_3D('',#127671,#127672,#127673); +#127671 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127672 = DIRECTION('',(0.,0.,1.)); +#127673 = DIRECTION('',(1.,0.,-0.)); +#127674 = SHELL_BASED_SURFACE_MODEL('',(#127675)); +#127675 = OPEN_SHELL('',(#127676)); +#127676 = ADVANCED_FACE('',(#127677),#127747,.T.); +#127677 = FACE_BOUND('',#127678,.F.); +#127678 = EDGE_LOOP('',(#127679,#127690,#127698,#127707,#127715,#127724, + #127732,#127741)); +#127679 = ORIENTED_EDGE('',*,*,#127680,.T.); +#127680 = EDGE_CURVE('',#127681,#127683,#127685,.T.); +#127681 = VERTEX_POINT('',#127682); +#127682 = CARTESIAN_POINT('',(117.761108,-136.920786,1.585)); +#127683 = VERTEX_POINT('',#127684); +#127684 = CARTESIAN_POINT('',(117.872223,-136.920786,1.585)); +#127685 = CIRCLE('',#127686,9.999886556645E-02); +#127686 = AXIS2_PLACEMENT_3D('',#127687,#127688,#127689); +#127687 = CARTESIAN_POINT('',(117.8166655,-137.0039312783,1.585)); +#127688 = DIRECTION('',(0.,0.,-1.)); +#127689 = DIRECTION('',(-0.555581302701,0.831462215671,0.)); +#127690 = ORIENTED_EDGE('',*,*,#127691,.T.); +#127691 = EDGE_CURVE('',#127683,#127692,#127694,.T.); +#127692 = VERTEX_POINT('',#127693); +#127693 = CARTESIAN_POINT('',(117.966481,-137.015043,1.585)); +#127694 = LINE('',#127695,#127696); +#127695 = CARTESIAN_POINT('',(117.872223,-136.920786,1.585)); +#127696 = VECTOR('',#127697,1.); +#127697 = DIRECTION('',(0.707110532108,-0.707103030245,0.)); +#127698 = ORIENTED_EDGE('',*,*,#127699,.T.); +#127699 = EDGE_CURVE('',#127692,#127700,#127702,.T.); +#127700 = VERTEX_POINT('',#127701); +#127701 = CARTESIAN_POINT('',(117.96648,-137.126158,1.585)); +#127702 = CIRCLE('',#127703,0.100002409286); +#127703 = AXIS2_PLACEMENT_3D('',#127704,#127705,#127706); +#127704 = CARTESIAN_POINT('',(117.88333095967,-137.0705997516,1.585)); +#127705 = DIRECTION('',(0.,0.,-1.)); +#127706 = DIRECTION('',(0.831480370493,0.555554131913,0.)); +#127707 = ORIENTED_EDGE('',*,*,#127708,.T.); +#127708 = EDGE_CURVE('',#127700,#127709,#127711,.T.); +#127709 = VERTEX_POINT('',#127710); +#127710 = CARTESIAN_POINT('',(117.872223,-137.220414,1.585)); +#127711 = LINE('',#127712,#127713); +#127712 = CARTESIAN_POINT('',(117.96648,-137.126158,1.585)); +#127713 = VECTOR('',#127714,1.); +#127714 = DIRECTION('',(-0.707110532148,-0.707103030206,0.)); +#127715 = ORIENTED_EDGE('',*,*,#127716,.T.); +#127716 = EDGE_CURVE('',#127709,#127717,#127719,.T.); +#127717 = VERTEX_POINT('',#127718); +#127718 = CARTESIAN_POINT('',(117.761109,-137.220414,1.585)); +#127719 = CIRCLE('',#127720,0.100004132127); +#127720 = AXIS2_PLACEMENT_3D('',#127721,#127722,#127723); +#127721 = CARTESIAN_POINT('',(117.816666,-137.1372620535,1.585)); +#127722 = DIRECTION('',(-0.,0.,-1.)); +#127723 = DIRECTION('',(0.555547044091,-0.831485106182,-0.)); +#127724 = ORIENTED_EDGE('',*,*,#127725,.T.); +#127725 = EDGE_CURVE('',#127717,#127726,#127728,.T.); +#127726 = VERTEX_POINT('',#127727); +#127727 = CARTESIAN_POINT('',(117.666852,-137.126158,1.585)); +#127728 = LINE('',#127729,#127730); +#127729 = CARTESIAN_POINT('',(117.761109,-137.220414,1.585)); +#127730 = VECTOR('',#127731,1.); +#127731 = DIRECTION('',(-0.707110532148,0.707103030206,0.)); +#127732 = ORIENTED_EDGE('',*,*,#127733,.T.); +#127733 = EDGE_CURVE('',#127726,#127734,#127736,.T.); +#127734 = VERTEX_POINT('',#127735); +#127735 = CARTESIAN_POINT('',(117.666856,-137.015037,1.585)); +#127736 = CIRCLE('',#127737,9.999996998941E-02); +#127737 = AXIS2_PLACEMENT_3D('',#127738,#127739,#127740); +#127738 = CARTESIAN_POINT('',(117.74999860189,-137.0706004929,1.585)); +#127739 = DIRECTION('',(0.,0.,-1.)); +#127740 = DIRECTION('',(-0.831466268502,-0.555575237339,-0.)); +#127741 = ORIENTED_EDGE('',*,*,#127742,.T.); +#127742 = EDGE_CURVE('',#127734,#127681,#127743,.T.); +#127743 = LINE('',#127744,#127745); +#127744 = CARTESIAN_POINT('',(117.666856,-137.015037,1.585)); +#127745 = VECTOR('',#127746,1.); +#127746 = DIRECTION('',(0.707110532346,0.707103030007,0.)); +#127747 = PLANE('',#127748); +#127748 = AXIS2_PLACEMENT_3D('',#127749,#127750,#127751); +#127749 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127750 = DIRECTION('',(0.,0.,1.)); +#127751 = DIRECTION('',(1.,0.,-0.)); +#127752 = SHELL_BASED_SURFACE_MODEL('',(#127753)); +#127753 = OPEN_SHELL('',(#127754)); +#127754 = ADVANCED_FACE('',(#127755),#127921,.T.); +#127755 = FACE_BOUND('',#127756,.F.); +#127756 = EDGE_LOOP('',(#127757,#127768,#127776,#127785,#127793,#127801, + #127809,#127817,#127825,#127834,#127842,#127850,#127858,#127866, + #127874,#127882,#127890,#127899,#127907,#127915)); +#127757 = ORIENTED_EDGE('',*,*,#127758,.T.); +#127758 = EDGE_CURVE('',#127759,#127761,#127763,.T.); +#127759 = VERTEX_POINT('',#127760); +#127760 = CARTESIAN_POINT('',(118.427776,-135.654119,1.585)); +#127761 = VERTEX_POINT('',#127762); +#127762 = CARTESIAN_POINT('',(118.581412,-135.717757,1.585)); +#127763 = CIRCLE('',#127764,0.100000590676); +#127764 = AXIS2_PLACEMENT_3D('',#127765,#127766,#127767); +#127765 = CARTESIAN_POINT('',(118.483333,-135.7372666872,1.585)); +#127766 = DIRECTION('',(0.,0.,-1.)); +#127767 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#127768 = ORIENTED_EDGE('',*,*,#127769,.T.); +#127769 = EDGE_CURVE('',#127761,#127770,#127772,.T.); +#127770 = VERTEX_POINT('',#127771); +#127771 = CARTESIAN_POINT('',(118.583333,-136.142129,1.585)); +#127772 = LINE('',#127773,#127774); +#127773 = CARTESIAN_POINT('',(118.581412,-135.717757,1.585)); +#127774 = VECTOR('',#127775,1.); +#127775 = DIRECTION('',(4.526642471175E-03,-0.999989754701,0.)); +#127776 = ORIENTED_EDGE('',*,*,#127777,.T.); +#127777 = EDGE_CURVE('',#127770,#127778,#127780,.T.); +#127778 = VERTEX_POINT('',#127779); +#127779 = CARTESIAN_POINT('',(118.928055,-136.11449,1.585)); +#127780 = CIRCLE('',#127781,0.392597731157); +#127781 = AXIS2_PLACEMENT_3D('',#127782,#127783,#127784); +#127782 = CARTESIAN_POINT('',(118.78386365681,-136.4796500129,1.585)); +#127783 = DIRECTION('',(0.,0.,-1.)); +#127784 = DIRECTION('',(-0.510778949809,0.859712082288,0.)); +#127785 = ORIENTED_EDGE('',*,*,#127786,.T.); +#127786 = EDGE_CURVE('',#127778,#127787,#127789,.T.); +#127787 = VERTEX_POINT('',#127788); +#127788 = CARTESIAN_POINT('',(119.077978,-136.1916,1.585)); +#127789 = LINE('',#127790,#127791); +#127790 = CARTESIAN_POINT('',(118.928055,-136.11449,1.585)); +#127791 = VECTOR('',#127792,1.); +#127792 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#127793 = ORIENTED_EDGE('',*,*,#127794,.T.); +#127794 = EDGE_CURVE('',#127787,#127795,#127797,.T.); +#127795 = VERTEX_POINT('',#127796); +#127796 = CARTESIAN_POINT('',(119.106109,-136.225878,1.585)); +#127797 = LINE('',#127798,#127799); +#127798 = CARTESIAN_POINT('',(119.077978,-136.1916,1.585)); +#127799 = VECTOR('',#127800,1.); +#127800 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#127801 = ORIENTED_EDGE('',*,*,#127802,.T.); +#127802 = EDGE_CURVE('',#127795,#127803,#127805,.T.); +#127803 = VERTEX_POINT('',#127804); +#127804 = CARTESIAN_POINT('',(119.180036,-136.381103,1.585)); +#127805 = LINE('',#127806,#127807); +#127806 = CARTESIAN_POINT('',(119.106109,-136.225878,1.585)); +#127807 = VECTOR('',#127808,1.); +#127808 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#127809 = ORIENTED_EDGE('',*,*,#127810,.T.); +#127810 = EDGE_CURVE('',#127803,#127811,#127813,.T.); +#127811 = VERTEX_POINT('',#127812); +#127812 = CARTESIAN_POINT('',(119.183333,-136.403933,1.585)); +#127813 = LINE('',#127814,#127815); +#127814 = CARTESIAN_POINT('',(119.180036,-136.381103,1.585)); +#127815 = VECTOR('',#127816,1.); +#127816 = DIRECTION('',(0.142932451763,-0.989732445782,0.)); +#127817 = ORIENTED_EDGE('',*,*,#127818,.T.); +#127818 = EDGE_CURVE('',#127811,#127819,#127821,.T.); +#127819 = VERTEX_POINT('',#127820); +#127820 = CARTESIAN_POINT('',(119.181412,-137.156775,1.585)); +#127821 = LINE('',#127822,#127823); +#127822 = CARTESIAN_POINT('',(119.183333,-136.403933,1.585)); +#127823 = VECTOR('',#127824,1.); +#127824 = DIRECTION('',(-2.551655920146E-03,-0.999996744521,0.)); +#127825 = ORIENTED_EDGE('',*,*,#127826,.T.); +#127826 = EDGE_CURVE('',#127819,#127827,#127829,.T.); +#127827 = VERTEX_POINT('',#127828); +#127828 = CARTESIAN_POINT('',(118.985254,-137.156775,1.585)); +#127829 = CIRCLE('',#127830,0.100000456609); +#127830 = AXIS2_PLACEMENT_3D('',#127831,#127832,#127833); +#127831 = CARTESIAN_POINT('',(119.083333,-137.137266,1.585)); +#127832 = DIRECTION('',(-0.,0.,-1.)); +#127833 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#127834 = ORIENTED_EDGE('',*,*,#127835,.T.); +#127835 = EDGE_CURVE('',#127827,#127836,#127838,.T.); +#127836 = VERTEX_POINT('',#127837); +#127837 = CARTESIAN_POINT('',(118.983333,-136.427541,1.585)); +#127838 = LINE('',#127839,#127840); +#127839 = CARTESIAN_POINT('',(118.985254,-137.156775,1.585)); +#127840 = VECTOR('',#127841,1.); +#127841 = DIRECTION('',(-2.634261889534E-03,0.999996530326,0.)); +#127842 = ORIENTED_EDGE('',*,*,#127843,.T.); +#127843 = EDGE_CURVE('',#127836,#127844,#127846,.T.); +#127844 = VERTEX_POINT('',#127845); +#127845 = CARTESIAN_POINT('',(118.94213,-136.345135,1.585)); +#127846 = LINE('',#127847,#127848); +#127847 = CARTESIAN_POINT('',(118.983333,-136.427541,1.585)); +#127848 = VECTOR('',#127849,1.); +#127849 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#127850 = ORIENTED_EDGE('',*,*,#127851,.T.); +#127851 = EDGE_CURVE('',#127844,#127852,#127854,.T.); +#127852 = VERTEX_POINT('',#127853); +#127853 = CARTESIAN_POINT('',(118.859725,-136.303933,1.585)); +#127854 = LINE('',#127855,#127856); +#127855 = CARTESIAN_POINT('',(118.94213,-136.345135,1.585)); +#127856 = VECTOR('',#127857,1.); +#127857 = DIRECTION('',(-0.894429361803,0.447209253868,0.)); +#127858 = ORIENTED_EDGE('',*,*,#127859,.T.); +#127859 = EDGE_CURVE('',#127852,#127860,#127862,.T.); +#127860 = VERTEX_POINT('',#127861); +#127861 = CARTESIAN_POINT('',(118.706941,-136.303933,1.585)); +#127862 = LINE('',#127863,#127864); +#127863 = CARTESIAN_POINT('',(118.859725,-136.303933,1.585)); +#127864 = VECTOR('',#127865,1.); +#127865 = DIRECTION('',(-1.,0.,0.)); +#127866 = ORIENTED_EDGE('',*,*,#127867,.T.); +#127867 = EDGE_CURVE('',#127860,#127868,#127870,.T.); +#127868 = VERTEX_POINT('',#127869); +#127869 = CARTESIAN_POINT('',(118.609233,-136.352787,1.585)); +#127870 = LINE('',#127871,#127872); +#127871 = CARTESIAN_POINT('',(118.706941,-136.303933,1.585)); +#127872 = VECTOR('',#127873,1.); +#127873 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#127874 = ORIENTED_EDGE('',*,*,#127875,.T.); +#127875 = EDGE_CURVE('',#127868,#127876,#127878,.T.); +#127876 = VERTEX_POINT('',#127877); +#127877 = CARTESIAN_POINT('',(118.583333,-136.378687,1.585)); +#127878 = LINE('',#127879,#127880); +#127879 = CARTESIAN_POINT('',(118.609233,-136.352787,1.585)); +#127880 = VECTOR('',#127881,1.); +#127881 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#127882 = ORIENTED_EDGE('',*,*,#127883,.T.); +#127883 = EDGE_CURVE('',#127876,#127884,#127886,.T.); +#127884 = VERTEX_POINT('',#127885); +#127885 = CARTESIAN_POINT('',(118.581412,-137.156775,1.585)); +#127886 = LINE('',#127887,#127888); +#127887 = CARTESIAN_POINT('',(118.583333,-136.378687,1.585)); +#127888 = VECTOR('',#127889,1.); +#127889 = DIRECTION('',(-2.468864891191E-03,-0.999996952348,0.)); +#127890 = ORIENTED_EDGE('',*,*,#127891,.T.); +#127891 = EDGE_CURVE('',#127884,#127892,#127894,.T.); +#127892 = VERTEX_POINT('',#127893); +#127893 = CARTESIAN_POINT('',(118.385254,-137.156775,1.585)); +#127894 = CIRCLE('',#127895,0.100000456609); +#127895 = AXIS2_PLACEMENT_3D('',#127896,#127897,#127898); +#127896 = CARTESIAN_POINT('',(118.483333,-137.137266,1.585)); +#127897 = DIRECTION('',(-0.,0.,-1.)); +#127898 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#127899 = ORIENTED_EDGE('',*,*,#127900,.T.); +#127900 = EDGE_CURVE('',#127892,#127901,#127903,.T.); +#127901 = VERTEX_POINT('',#127902); +#127902 = CARTESIAN_POINT('',(118.385254,-135.717757,1.585)); +#127903 = LINE('',#127904,#127905); +#127904 = CARTESIAN_POINT('',(118.385254,-137.156775,1.585)); +#127905 = VECTOR('',#127906,1.); +#127906 = DIRECTION('',(0.,1.,0.)); +#127907 = ORIENTED_EDGE('',*,*,#127908,.T.); +#127908 = EDGE_CURVE('',#127901,#127909,#127911,.T.); +#127909 = VERTEX_POINT('',#127910); +#127910 = CARTESIAN_POINT('',(118.400186,-135.681709,1.585)); +#127911 = LINE('',#127912,#127913); +#127912 = CARTESIAN_POINT('',(118.385254,-135.717757,1.585)); +#127913 = VECTOR('',#127914,1.); +#127914 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#127915 = ORIENTED_EDGE('',*,*,#127916,.T.); +#127916 = EDGE_CURVE('',#127909,#127759,#127917,.T.); +#127917 = LINE('',#127918,#127919); +#127918 = CARTESIAN_POINT('',(118.400186,-135.681709,1.585)); +#127919 = VECTOR('',#127920,1.); +#127920 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#127921 = PLANE('',#127922); +#127922 = AXIS2_PLACEMENT_3D('',#127923,#127924,#127925); +#127923 = CARTESIAN_POINT('',(0.,0.,1.585)); +#127924 = DIRECTION('',(0.,0.,1.)); +#127925 = DIRECTION('',(1.,0.,-0.)); +#127926 = SHELL_BASED_SURFACE_MODEL('',(#127927)); +#127927 = OPEN_SHELL('',(#127928)); +#127928 = ADVANCED_FACE('',(#127929),#128102,.T.); +#127929 = FACE_BOUND('',#127930,.F.); +#127930 = EDGE_LOOP('',(#127931,#127942,#127950,#127958,#127966,#127974, + #127982,#127990,#127998,#128006,#128015,#128023,#128031,#128039, + #128047,#128055,#128063,#128071,#128080,#128088,#128096)); +#127931 = ORIENTED_EDGE('',*,*,#127932,.T.); +#127932 = EDGE_CURVE('',#127933,#127935,#127937,.T.); +#127933 = VERTEX_POINT('',#127934); +#127934 = CARTESIAN_POINT('',(124.094443,-136.120786,1.585)); +#127935 = VERTEX_POINT('',#127936); +#127936 = CARTESIAN_POINT('',(124.233894,-136.150181,1.585)); +#127937 = CIRCLE('',#127938,9.940146468379E-02); +#127938 = AXIS2_PLACEMENT_3D('',#127939,#127940,#127941); +#127939 = CARTESIAN_POINT('',(124.14987405192,-136.2032969063,1.585)); +#127940 = DIRECTION('',(0.,0.,-1.)); +#127941 = DIRECTION('',(-0.557648240859,0.830077369567,0.)); +#127942 = ORIENTED_EDGE('',*,*,#127943,.T.); +#127943 = EDGE_CURVE('',#127935,#127944,#127946,.T.); +#127944 = VERTEX_POINT('',#127945); +#127945 = CARTESIAN_POINT('',(124.330491,-136.105854,1.585)); +#127946 = LINE('',#127947,#127948); +#127947 = CARTESIAN_POINT('',(124.233894,-136.150181,1.585)); +#127948 = VECTOR('',#127949,1.); +#127949 = DIRECTION('',(0.908874511162,0.417069685977,0.)); +#127950 = ORIENTED_EDGE('',*,*,#127951,.T.); +#127951 = EDGE_CURVE('',#127944,#127952,#127954,.T.); +#127952 = VERTEX_POINT('',#127953); +#127953 = CARTESIAN_POINT('',(124.569509,-136.105854,1.585)); +#127954 = LINE('',#127955,#127956); +#127955 = CARTESIAN_POINT('',(124.330491,-136.105854,1.585)); +#127956 = VECTOR('',#127957,1.); +#127957 = DIRECTION('',(1.,0.,0.)); +#127958 = ORIENTED_EDGE('',*,*,#127959,.T.); +#127959 = EDGE_CURVE('',#127952,#127960,#127962,.T.); +#127960 = VERTEX_POINT('',#127961); +#127961 = CARTESIAN_POINT('',(124.594722,-136.11449,1.585)); +#127962 = LINE('',#127963,#127964); +#127963 = CARTESIAN_POINT('',(124.569509,-136.105854,1.585)); +#127964 = VECTOR('',#127965,1.); +#127965 = DIRECTION('',(0.946043257817,-0.32404035912,0.)); +#127966 = ORIENTED_EDGE('',*,*,#127967,.T.); +#127967 = EDGE_CURVE('',#127960,#127968,#127970,.T.); +#127968 = VERTEX_POINT('',#127969); +#127969 = CARTESIAN_POINT('',(124.744645,-136.1916,1.585)); +#127970 = LINE('',#127971,#127972); +#127971 = CARTESIAN_POINT('',(124.594722,-136.11449,1.585)); +#127972 = VECTOR('',#127973,1.); +#127973 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#127974 = ORIENTED_EDGE('',*,*,#127975,.T.); +#127975 = EDGE_CURVE('',#127968,#127976,#127978,.T.); +#127976 = VERTEX_POINT('',#127977); +#127977 = CARTESIAN_POINT('',(124.772776,-136.225878,1.585)); +#127978 = LINE('',#127979,#127980); +#127979 = CARTESIAN_POINT('',(124.744645,-136.1916,1.585)); +#127980 = VECTOR('',#127981,1.); +#127981 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#127982 = ORIENTED_EDGE('',*,*,#127983,.T.); +#127983 = EDGE_CURVE('',#127976,#127984,#127986,.T.); +#127984 = VERTEX_POINT('',#127985); +#127985 = CARTESIAN_POINT('',(124.846703,-136.381103,1.585)); +#127986 = LINE('',#127987,#127988); +#127987 = CARTESIAN_POINT('',(124.772776,-136.225878,1.585)); +#127988 = VECTOR('',#127989,1.); +#127989 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#127990 = ORIENTED_EDGE('',*,*,#127991,.T.); +#127991 = EDGE_CURVE('',#127984,#127992,#127994,.T.); +#127992 = VERTEX_POINT('',#127993); +#127993 = CARTESIAN_POINT('',(124.85,-136.403933,1.585)); +#127994 = LINE('',#127995,#127996); +#127995 = CARTESIAN_POINT('',(124.846703,-136.381103,1.585)); +#127996 = VECTOR('',#127997,1.); +#127997 = DIRECTION('',(0.142932451762,-0.989732445782,0.)); +#127998 = ORIENTED_EDGE('',*,*,#127999,.T.); +#127999 = EDGE_CURVE('',#127992,#128000,#128002,.T.); +#128000 = VERTEX_POINT('',#128001); +#128001 = CARTESIAN_POINT('',(124.848079,-137.156775,1.585)); +#128002 = LINE('',#128003,#128004); +#128003 = CARTESIAN_POINT('',(124.85,-136.403933,1.585)); +#128004 = VECTOR('',#128005,1.); +#128005 = DIRECTION('',(-2.551655920127E-03,-0.999996744521,0.)); +#128006 = ORIENTED_EDGE('',*,*,#128007,.T.); +#128007 = EDGE_CURVE('',#128000,#128008,#128010,.T.); +#128008 = VERTEX_POINT('',#128009); +#128009 = CARTESIAN_POINT('',(124.651921,-137.156775,1.585)); +#128010 = CIRCLE('',#128011,0.100000456609); +#128011 = AXIS2_PLACEMENT_3D('',#128012,#128013,#128014); +#128012 = CARTESIAN_POINT('',(124.75,-137.137266,1.585)); +#128013 = DIRECTION('',(-0.,0.,-1.)); +#128014 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128015 = ORIENTED_EDGE('',*,*,#128016,.T.); +#128016 = EDGE_CURVE('',#128008,#128017,#128019,.T.); +#128017 = VERTEX_POINT('',#128018); +#128018 = CARTESIAN_POINT('',(124.65,-136.427541,1.585)); +#128019 = LINE('',#128020,#128021); +#128020 = CARTESIAN_POINT('',(124.651921,-137.156775,1.585)); +#128021 = VECTOR('',#128022,1.); +#128022 = DIRECTION('',(-2.634261889534E-03,0.999996530326,0.)); +#128023 = ORIENTED_EDGE('',*,*,#128024,.T.); +#128024 = EDGE_CURVE('',#128017,#128025,#128027,.T.); +#128025 = VERTEX_POINT('',#128026); +#128026 = CARTESIAN_POINT('',(124.608797,-136.345135,1.585)); +#128027 = LINE('',#128028,#128029); +#128028 = CARTESIAN_POINT('',(124.65,-136.427541,1.585)); +#128029 = VECTOR('',#128030,1.); +#128030 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#128031 = ORIENTED_EDGE('',*,*,#128032,.T.); +#128032 = EDGE_CURVE('',#128025,#128033,#128035,.T.); +#128033 = VERTEX_POINT('',#128034); +#128034 = CARTESIAN_POINT('',(124.526392,-136.303933,1.585)); +#128035 = LINE('',#128036,#128037); +#128036 = CARTESIAN_POINT('',(124.608797,-136.345135,1.585)); +#128037 = VECTOR('',#128038,1.); +#128038 = DIRECTION('',(-0.894429361803,0.447209253868,0.)); +#128039 = ORIENTED_EDGE('',*,*,#128040,.T.); +#128040 = EDGE_CURVE('',#128033,#128041,#128043,.T.); +#128041 = VERTEX_POINT('',#128042); +#128042 = CARTESIAN_POINT('',(124.373608,-136.303933,1.585)); +#128043 = LINE('',#128044,#128045); +#128044 = CARTESIAN_POINT('',(124.526392,-136.303933,1.585)); +#128045 = VECTOR('',#128046,1.); +#128046 = DIRECTION('',(-1.,0.,0.)); +#128047 = ORIENTED_EDGE('',*,*,#128048,.T.); +#128048 = EDGE_CURVE('',#128041,#128049,#128051,.T.); +#128049 = VERTEX_POINT('',#128050); +#128050 = CARTESIAN_POINT('',(124.2759,-136.352787,1.585)); +#128051 = LINE('',#128052,#128053); +#128052 = CARTESIAN_POINT('',(124.373608,-136.303933,1.585)); +#128053 = VECTOR('',#128054,1.); +#128054 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#128055 = ORIENTED_EDGE('',*,*,#128056,.T.); +#128056 = EDGE_CURVE('',#128049,#128057,#128059,.T.); +#128057 = VERTEX_POINT('',#128058); +#128058 = CARTESIAN_POINT('',(124.25,-136.378687,1.585)); +#128059 = LINE('',#128060,#128061); +#128060 = CARTESIAN_POINT('',(124.2759,-136.352787,1.585)); +#128061 = VECTOR('',#128062,1.); +#128062 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#128063 = ORIENTED_EDGE('',*,*,#128064,.T.); +#128064 = EDGE_CURVE('',#128057,#128065,#128067,.T.); +#128065 = VERTEX_POINT('',#128066); +#128066 = CARTESIAN_POINT('',(124.248079,-137.156775,1.585)); +#128067 = LINE('',#128068,#128069); +#128068 = CARTESIAN_POINT('',(124.25,-136.378687,1.585)); +#128069 = VECTOR('',#128070,1.); +#128070 = DIRECTION('',(-2.468864891191E-03,-0.999996952348,0.)); +#128071 = ORIENTED_EDGE('',*,*,#128072,.T.); +#128072 = EDGE_CURVE('',#128065,#128073,#128075,.T.); +#128073 = VERTEX_POINT('',#128074); +#128074 = CARTESIAN_POINT('',(124.051921,-137.156775,1.585)); +#128075 = CIRCLE('',#128076,0.100000456609); +#128076 = AXIS2_PLACEMENT_3D('',#128077,#128078,#128079); +#128077 = CARTESIAN_POINT('',(124.15,-137.137266,1.585)); +#128078 = DIRECTION('',(-0.,0.,-1.)); +#128079 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128080 = ORIENTED_EDGE('',*,*,#128081,.T.); +#128081 = EDGE_CURVE('',#128073,#128082,#128084,.T.); +#128082 = VERTEX_POINT('',#128083); +#128083 = CARTESIAN_POINT('',(124.051921,-136.184424,1.585)); +#128084 = LINE('',#128085,#128086); +#128085 = CARTESIAN_POINT('',(124.051921,-137.156775,1.585)); +#128086 = VECTOR('',#128087,1.); +#128087 = DIRECTION('',(0.,1.,0.)); +#128088 = ORIENTED_EDGE('',*,*,#128089,.T.); +#128089 = EDGE_CURVE('',#128082,#128090,#128092,.T.); +#128090 = VERTEX_POINT('',#128091); +#128091 = CARTESIAN_POINT('',(124.066853,-136.148376,1.585)); +#128092 = LINE('',#128093,#128094); +#128093 = CARTESIAN_POINT('',(124.051921,-136.184424,1.585)); +#128094 = VECTOR('',#128095,1.); +#128095 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#128096 = ORIENTED_EDGE('',*,*,#128097,.T.); +#128097 = EDGE_CURVE('',#128090,#127933,#128098,.T.); +#128098 = LINE('',#128099,#128100); +#128099 = CARTESIAN_POINT('',(124.066853,-136.148376,1.585)); +#128100 = VECTOR('',#128101,1.); +#128101 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128102 = PLANE('',#128103); +#128103 = AXIS2_PLACEMENT_3D('',#128104,#128105,#128106); +#128104 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128105 = DIRECTION('',(0.,0.,1.)); +#128106 = DIRECTION('',(1.,0.,-0.)); +#128107 = SHELL_BASED_SURFACE_MODEL('',(#128108)); +#128108 = OPEN_SHELL('',(#128109)); +#128109 = ADVANCED_FACE('',(#128110),#128180,.T.); +#128110 = FACE_BOUND('',#128111,.F.); +#128111 = EDGE_LOOP('',(#128112,#128123,#128131,#128140,#128148,#128157, + #128165,#128174)); +#128112 = ORIENTED_EDGE('',*,*,#128113,.T.); +#128113 = EDGE_CURVE('',#128114,#128116,#128118,.T.); +#128114 = VERTEX_POINT('',#128115); +#128115 = CARTESIAN_POINT('',(125.361109,-136.920786,1.585)); +#128116 = VERTEX_POINT('',#128117); +#128117 = CARTESIAN_POINT('',(125.472224,-136.920786,1.585)); +#128118 = CIRCLE('',#128119,9.999886556645E-02); +#128119 = AXIS2_PLACEMENT_3D('',#128120,#128121,#128122); +#128120 = CARTESIAN_POINT('',(125.4166665,-137.0039312783,1.585)); +#128121 = DIRECTION('',(0.,0.,-1.)); +#128122 = DIRECTION('',(-0.555581302701,0.831462215672,0.)); +#128123 = ORIENTED_EDGE('',*,*,#128124,.T.); +#128124 = EDGE_CURVE('',#128116,#128125,#128127,.T.); +#128125 = VERTEX_POINT('',#128126); +#128126 = CARTESIAN_POINT('',(125.566482,-137.015043,1.585)); +#128127 = LINE('',#128128,#128129); +#128128 = CARTESIAN_POINT('',(125.472224,-136.920786,1.585)); +#128129 = VECTOR('',#128130,1.); +#128130 = DIRECTION('',(0.707110532108,-0.707103030245,0.)); +#128131 = ORIENTED_EDGE('',*,*,#128132,.T.); +#128132 = EDGE_CURVE('',#128125,#128133,#128135,.T.); +#128133 = VERTEX_POINT('',#128134); +#128134 = CARTESIAN_POINT('',(125.566481,-137.126158,1.585)); +#128135 = CIRCLE('',#128136,0.100002409286); +#128136 = AXIS2_PLACEMENT_3D('',#128137,#128138,#128139); +#128137 = CARTESIAN_POINT('',(125.48333195967,-137.0705997516,1.585)); +#128138 = DIRECTION('',(0.,0.,-1.)); +#128139 = DIRECTION('',(0.831480370493,0.555554131913,0.)); +#128140 = ORIENTED_EDGE('',*,*,#128141,.T.); +#128141 = EDGE_CURVE('',#128133,#128142,#128144,.T.); +#128142 = VERTEX_POINT('',#128143); +#128143 = CARTESIAN_POINT('',(125.472224,-137.220414,1.585)); +#128144 = LINE('',#128145,#128146); +#128145 = CARTESIAN_POINT('',(125.566481,-137.126158,1.585)); +#128146 = VECTOR('',#128147,1.); +#128147 = DIRECTION('',(-0.707110532148,-0.707103030206,0.)); +#128148 = ORIENTED_EDGE('',*,*,#128149,.T.); +#128149 = EDGE_CURVE('',#128142,#128150,#128152,.T.); +#128150 = VERTEX_POINT('',#128151); +#128151 = CARTESIAN_POINT('',(125.36111,-137.220414,1.585)); +#128152 = CIRCLE('',#128153,0.100004132127); +#128153 = AXIS2_PLACEMENT_3D('',#128154,#128155,#128156); +#128154 = CARTESIAN_POINT('',(125.416667,-137.1372620535,1.585)); +#128155 = DIRECTION('',(-0.,0.,-1.)); +#128156 = DIRECTION('',(0.555547044091,-0.831485106182,-0.)); +#128157 = ORIENTED_EDGE('',*,*,#128158,.T.); +#128158 = EDGE_CURVE('',#128150,#128159,#128161,.T.); +#128159 = VERTEX_POINT('',#128160); +#128160 = CARTESIAN_POINT('',(125.266853,-137.126158,1.585)); +#128161 = LINE('',#128162,#128163); +#128162 = CARTESIAN_POINT('',(125.36111,-137.220414,1.585)); +#128163 = VECTOR('',#128164,1.); +#128164 = DIRECTION('',(-0.707110532148,0.707103030206,0.)); +#128165 = ORIENTED_EDGE('',*,*,#128166,.T.); +#128166 = EDGE_CURVE('',#128159,#128167,#128169,.T.); +#128167 = VERTEX_POINT('',#128168); +#128168 = CARTESIAN_POINT('',(125.266857,-137.015037,1.585)); +#128169 = CIRCLE('',#128170,9.999996998938E-02); +#128170 = AXIS2_PLACEMENT_3D('',#128171,#128172,#128173); +#128171 = CARTESIAN_POINT('',(125.34999960189,-137.0706004929,1.585)); +#128172 = DIRECTION('',(0.,0.,-1.)); +#128173 = DIRECTION('',(-0.831466268502,-0.555575237339,-0.)); +#128174 = ORIENTED_EDGE('',*,*,#128175,.T.); +#128175 = EDGE_CURVE('',#128167,#128114,#128176,.T.); +#128176 = LINE('',#128177,#128178); +#128177 = CARTESIAN_POINT('',(125.266857,-137.015037,1.585)); +#128178 = VECTOR('',#128179,1.); +#128179 = DIRECTION('',(0.707110532346,0.707103030007,0.)); +#128180 = PLANE('',#128181); +#128181 = AXIS2_PLACEMENT_3D('',#128182,#128183,#128184); +#128182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128183 = DIRECTION('',(0.,0.,1.)); +#128184 = DIRECTION('',(1.,0.,-0.)); +#128185 = SHELL_BASED_SURFACE_MODEL('',(#128186)); +#128186 = OPEN_SHELL('',(#128187)); +#128187 = ADVANCED_FACE('',(#128188),#128378,.T.); +#128188 = FACE_BOUND('',#128189,.F.); +#128189 = EDGE_LOOP('',(#128190,#128201,#128209,#128217,#128226,#128234, + #128242,#128250,#128258,#128266,#128275,#128283,#128291,#128299, + #128307,#128315,#128323,#128331,#128339,#128348,#128356,#128364, + #128372)); +#128190 = ORIENTED_EDGE('',*,*,#128191,.T.); +#128191 = EDGE_CURVE('',#128192,#128194,#128196,.T.); +#128192 = VERTEX_POINT('',#128193); +#128193 = CARTESIAN_POINT('',(126.027777,-135.654119,1.585)); +#128194 = VERTEX_POINT('',#128195); +#128195 = CARTESIAN_POINT('',(126.181413,-135.717757,1.585)); +#128196 = CIRCLE('',#128197,0.100000590676); +#128197 = AXIS2_PLACEMENT_3D('',#128198,#128199,#128200); +#128198 = CARTESIAN_POINT('',(126.083334,-135.7372666872,1.585)); +#128199 = DIRECTION('',(0.,0.,-1.)); +#128200 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#128201 = ORIENTED_EDGE('',*,*,#128202,.T.); +#128202 = EDGE_CURVE('',#128194,#128203,#128205,.T.); +#128203 = VERTEX_POINT('',#128204); +#128204 = CARTESIAN_POINT('',(126.183334,-136.103933,1.585)); +#128205 = LINE('',#128206,#128207); +#128206 = CARTESIAN_POINT('',(126.181413,-135.717757,1.585)); +#128207 = VECTOR('',#128208,1.); +#128208 = DIRECTION('',(4.974354266045E-03,-0.999987627823,0.)); +#128209 = ORIENTED_EDGE('',*,*,#128210,.T.); +#128210 = EDGE_CURVE('',#128203,#128211,#128213,.T.); +#128211 = VERTEX_POINT('',#128212); +#128212 = CARTESIAN_POINT('',(126.436176,-136.105854,1.585)); +#128213 = LINE('',#128214,#128215); +#128214 = CARTESIAN_POINT('',(126.183334,-136.103933,1.585)); +#128215 = VECTOR('',#128216,1.); +#128216 = DIRECTION('',(0.999971139258,-7.597410867243E-03,0.)); +#128217 = ORIENTED_EDGE('',*,*,#128218,.T.); +#128218 = EDGE_CURVE('',#128211,#128219,#128221,.T.); +#128219 = VERTEX_POINT('',#128220); +#128220 = CARTESIAN_POINT('',(126.436176,-136.302012,1.585)); +#128221 = CIRCLE('',#128222,0.100000456609); +#128222 = AXIS2_PLACEMENT_3D('',#128223,#128224,#128225); +#128223 = CARTESIAN_POINT('',(126.416667,-136.203933,1.585)); +#128224 = DIRECTION('',(0.,0.,-1.)); +#128225 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#128226 = ORIENTED_EDGE('',*,*,#128227,.T.); +#128227 = EDGE_CURVE('',#128219,#128228,#128230,.T.); +#128228 = VERTEX_POINT('',#128229); +#128229 = CARTESIAN_POINT('',(126.183334,-136.303933,1.585)); +#128230 = LINE('',#128231,#128232); +#128231 = CARTESIAN_POINT('',(126.436176,-136.302012,1.585)); +#128232 = VECTOR('',#128233,1.); +#128233 = DIRECTION('',(-0.999971139258,-7.597410867355E-03,0.)); +#128234 = ORIENTED_EDGE('',*,*,#128235,.T.); +#128235 = EDGE_CURVE('',#128228,#128236,#128238,.T.); +#128236 = VERTEX_POINT('',#128237); +#128237 = CARTESIAN_POINT('',(126.183334,-136.913659,1.585)); +#128238 = LINE('',#128239,#128240); +#128239 = CARTESIAN_POINT('',(126.183334,-136.303933,1.585)); +#128240 = VECTOR('',#128241,1.); +#128241 = DIRECTION('',(0.,-1.,0.)); +#128242 = ORIENTED_EDGE('',*,*,#128243,.T.); +#128243 = EDGE_CURVE('',#128236,#128244,#128246,.T.); +#128244 = VERTEX_POINT('',#128245); +#128245 = CARTESIAN_POINT('',(126.224536,-136.996064,1.585)); +#128246 = LINE('',#128247,#128248); +#128247 = CARTESIAN_POINT('',(126.183334,-136.913659,1.585)); +#128248 = VECTOR('',#128249,1.); +#128249 = DIRECTION('',(0.447209253868,-0.894429361803,0.)); +#128250 = ORIENTED_EDGE('',*,*,#128251,.T.); +#128251 = EDGE_CURVE('',#128244,#128252,#128254,.T.); +#128252 = VERTEX_POINT('',#128253); +#128253 = CARTESIAN_POINT('',(126.306941,-137.037266,1.585)); +#128254 = LINE('',#128255,#128256); +#128255 = CARTESIAN_POINT('',(126.224536,-136.996064,1.585)); +#128256 = VECTOR('',#128257,1.); +#128257 = DIRECTION('',(0.894429361803,-0.447209253868,0.)); +#128258 = ORIENTED_EDGE('',*,*,#128259,.T.); +#128259 = EDGE_CURVE('',#128252,#128260,#128262,.T.); +#128260 = VERTEX_POINT('',#128261); +#128261 = CARTESIAN_POINT('',(126.436176,-137.039187,1.585)); +#128262 = LINE('',#128263,#128264); +#128263 = CARTESIAN_POINT('',(126.306941,-137.037266,1.585)); +#128264 = VECTOR('',#128265,1.); +#128265 = DIRECTION('',(0.999889543194,-1.486275244699E-02,0.)); +#128266 = ORIENTED_EDGE('',*,*,#128267,.T.); +#128267 = EDGE_CURVE('',#128260,#128268,#128270,.T.); +#128268 = VERTEX_POINT('',#128269); +#128269 = CARTESIAN_POINT('',(126.436176,-137.235345,1.585)); +#128270 = CIRCLE('',#128271,0.100000456609); +#128271 = AXIS2_PLACEMENT_3D('',#128272,#128273,#128274); +#128272 = CARTESIAN_POINT('',(126.416667,-137.137266,1.585)); +#128273 = DIRECTION('',(0.,0.,-1.)); +#128274 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#128275 = ORIENTED_EDGE('',*,*,#128276,.T.); +#128276 = EDGE_CURVE('',#128268,#128277,#128279,.T.); +#128277 = VERTEX_POINT('',#128278); +#128278 = CARTESIAN_POINT('',(126.263825,-137.235345,1.585)); +#128279 = LINE('',#128280,#128281); +#128280 = CARTESIAN_POINT('',(126.436176,-137.235345,1.585)); +#128281 = VECTOR('',#128282,1.); +#128282 = DIRECTION('',(-1.,0.,0.)); +#128283 = ORIENTED_EDGE('',*,*,#128284,.T.); +#128284 = EDGE_CURVE('',#128277,#128285,#128287,.T.); +#128285 = VERTEX_POINT('',#128286); +#128286 = CARTESIAN_POINT('',(126.238613,-137.226709,1.585)); +#128287 = LINE('',#128288,#128289); +#128288 = CARTESIAN_POINT('',(126.263825,-137.235345,1.585)); +#128289 = VECTOR('',#128290,1.); +#128290 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#128291 = ORIENTED_EDGE('',*,*,#128292,.T.); +#128292 = EDGE_CURVE('',#128285,#128293,#128295,.T.); +#128293 = VERTEX_POINT('',#128294); +#128294 = CARTESIAN_POINT('',(126.08869,-137.1496,1.585)); +#128295 = LINE('',#128296,#128297); +#128296 = CARTESIAN_POINT('',(126.238613,-137.226709,1.585)); +#128297 = VECTOR('',#128298,1.); +#128298 = DIRECTION('',(-0.889273947614,0.457374951319,0.)); +#128299 = ORIENTED_EDGE('',*,*,#128300,.T.); +#128300 = EDGE_CURVE('',#128293,#128301,#128303,.T.); +#128301 = VERTEX_POINT('',#128302); +#128302 = CARTESIAN_POINT('',(126.060558,-137.115321,1.585)); +#128303 = LINE('',#128304,#128305); +#128304 = CARTESIAN_POINT('',(126.08869,-137.1496,1.585)); +#128305 = VECTOR('',#128306,1.); +#128306 = DIRECTION('',(-0.634392633715,0.773010987172,0.)); +#128307 = ORIENTED_EDGE('',*,*,#128308,.T.); +#128308 = EDGE_CURVE('',#128301,#128309,#128311,.T.); +#128309 = VERTEX_POINT('',#128310); +#128310 = CARTESIAN_POINT('',(125.98663,-136.960095,1.585)); +#128311 = LINE('',#128312,#128313); +#128312 = CARTESIAN_POINT('',(126.060558,-137.115321,1.585)); +#128313 = VECTOR('',#128314,1.); +#128314 = DIRECTION('',(-0.429985055277,0.902836005174,0.)); +#128315 = ORIENTED_EDGE('',*,*,#128316,.T.); +#128316 = EDGE_CURVE('',#128309,#128317,#128319,.T.); +#128317 = VERTEX_POINT('',#128318); +#128318 = CARTESIAN_POINT('',(125.983334,-136.937266,1.585)); +#128319 = LINE('',#128320,#128321); +#128320 = CARTESIAN_POINT('',(125.98663,-136.960095,1.585)); +#128321 = VECTOR('',#128322,1.); +#128322 = DIRECTION('',(-0.142896116105,0.989737692524,0.)); +#128323 = ORIENTED_EDGE('',*,*,#128324,.T.); +#128324 = EDGE_CURVE('',#128317,#128325,#128327,.T.); +#128325 = VERTEX_POINT('',#128326); +#128326 = CARTESIAN_POINT('',(125.983334,-136.303933,1.585)); +#128327 = LINE('',#128328,#128329); +#128328 = CARTESIAN_POINT('',(125.983334,-136.937266,1.585)); +#128329 = VECTOR('',#128330,1.); +#128330 = DIRECTION('',(0.,1.,0.)); +#128331 = ORIENTED_EDGE('',*,*,#128332,.T.); +#128332 = EDGE_CURVE('',#128325,#128333,#128335,.T.); +#128333 = VERTEX_POINT('',#128334); +#128334 = CARTESIAN_POINT('',(125.863825,-136.302012,1.585)); +#128335 = LINE('',#128336,#128337); +#128336 = CARTESIAN_POINT('',(125.983334,-136.303933,1.585)); +#128337 = VECTOR('',#128338,1.); +#128338 = DIRECTION('',(-0.999870836632,1.60720270204E-02,0.)); +#128339 = ORIENTED_EDGE('',*,*,#128340,.T.); +#128340 = EDGE_CURVE('',#128333,#128341,#128343,.T.); +#128341 = VERTEX_POINT('',#128342); +#128342 = CARTESIAN_POINT('',(125.863825,-136.105854,1.585)); +#128343 = CIRCLE('',#128344,0.100000456609); +#128344 = AXIS2_PLACEMENT_3D('',#128345,#128346,#128347); +#128345 = CARTESIAN_POINT('',(125.883334,-136.203933,1.585)); +#128346 = DIRECTION('',(0.,0.,-1.)); +#128347 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#128348 = ORIENTED_EDGE('',*,*,#128349,.T.); +#128349 = EDGE_CURVE('',#128341,#128350,#128352,.T.); +#128350 = VERTEX_POINT('',#128351); +#128351 = CARTESIAN_POINT('',(125.983334,-136.103933,1.585)); +#128352 = LINE('',#128353,#128354); +#128353 = CARTESIAN_POINT('',(125.863825,-136.105854,1.585)); +#128354 = VECTOR('',#128355,1.); +#128355 = DIRECTION('',(0.999870836632,1.607202702016E-02,0.)); +#128356 = ORIENTED_EDGE('',*,*,#128357,.T.); +#128357 = EDGE_CURVE('',#128350,#128358,#128360,.T.); +#128358 = VERTEX_POINT('',#128359); +#128359 = CARTESIAN_POINT('',(125.985255,-135.717757,1.585)); +#128360 = LINE('',#128361,#128362); +#128361 = CARTESIAN_POINT('',(125.983334,-136.103933,1.585)); +#128362 = VECTOR('',#128363,1.); +#128363 = DIRECTION('',(4.974354266045E-03,0.999987627823,0.)); +#128364 = ORIENTED_EDGE('',*,*,#128365,.T.); +#128365 = EDGE_CURVE('',#128358,#128366,#128368,.T.); +#128366 = VERTEX_POINT('',#128367); +#128367 = CARTESIAN_POINT('',(126.000187,-135.681709,1.585)); +#128368 = LINE('',#128369,#128370); +#128369 = CARTESIAN_POINT('',(125.985255,-135.717757,1.585)); +#128370 = VECTOR('',#128371,1.); +#128371 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#128372 = ORIENTED_EDGE('',*,*,#128373,.T.); +#128373 = EDGE_CURVE('',#128366,#128192,#128374,.T.); +#128374 = LINE('',#128375,#128376); +#128375 = CARTESIAN_POINT('',(126.000187,-135.681709,1.585)); +#128376 = VECTOR('',#128377,1.); +#128377 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128378 = PLANE('',#128379); +#128379 = AXIS2_PLACEMENT_3D('',#128380,#128381,#128382); +#128380 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128381 = DIRECTION('',(0.,0.,1.)); +#128382 = DIRECTION('',(1.,0.,-0.)); +#128383 = SHELL_BASED_SURFACE_MODEL('',(#128384)); +#128384 = OPEN_SHELL('',(#128385)); +#128385 = ADVANCED_FACE('',(#128386),#128552,.T.); +#128386 = FACE_BOUND('',#128387,.F.); +#128387 = EDGE_LOOP('',(#128388,#128399,#128407,#128416,#128424,#128432, + #128440,#128448,#128456,#128465,#128473,#128481,#128489,#128497, + #128505,#128513,#128521,#128530,#128538,#128546)); +#128388 = ORIENTED_EDGE('',*,*,#128389,.T.); +#128389 = EDGE_CURVE('',#128390,#128392,#128394,.T.); +#128390 = VERTEX_POINT('',#128391); +#128391 = CARTESIAN_POINT('',(129.227777,-135.654119,1.585)); +#128392 = VERTEX_POINT('',#128393); +#128393 = CARTESIAN_POINT('',(129.381413,-135.717757,1.585)); +#128394 = CIRCLE('',#128395,0.100000590676); +#128395 = AXIS2_PLACEMENT_3D('',#128396,#128397,#128398); +#128396 = CARTESIAN_POINT('',(129.283334,-135.7372666872,1.585)); +#128397 = DIRECTION('',(0.,0.,-1.)); +#128398 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#128399 = ORIENTED_EDGE('',*,*,#128400,.T.); +#128400 = EDGE_CURVE('',#128392,#128401,#128403,.T.); +#128401 = VERTEX_POINT('',#128402); +#128402 = CARTESIAN_POINT('',(129.383334,-136.142129,1.585)); +#128403 = LINE('',#128404,#128405); +#128404 = CARTESIAN_POINT('',(129.381413,-135.717757,1.585)); +#128405 = VECTOR('',#128406,1.); +#128406 = DIRECTION('',(4.526642471141E-03,-0.999989754701,0.)); +#128407 = ORIENTED_EDGE('',*,*,#128408,.T.); +#128408 = EDGE_CURVE('',#128401,#128409,#128411,.T.); +#128409 = VERTEX_POINT('',#128410); +#128410 = CARTESIAN_POINT('',(129.728056,-136.11449,1.585)); +#128411 = CIRCLE('',#128412,0.392597731157); +#128412 = AXIS2_PLACEMENT_3D('',#128413,#128414,#128415); +#128413 = CARTESIAN_POINT('',(129.58386465681,-136.4796500129,1.585)); +#128414 = DIRECTION('',(0.,0.,-1.)); +#128415 = DIRECTION('',(-0.510778949809,0.859712082288,0.)); +#128416 = ORIENTED_EDGE('',*,*,#128417,.T.); +#128417 = EDGE_CURVE('',#128409,#128418,#128420,.T.); +#128418 = VERTEX_POINT('',#128419); +#128419 = CARTESIAN_POINT('',(129.877979,-136.1916,1.585)); +#128420 = LINE('',#128421,#128422); +#128421 = CARTESIAN_POINT('',(129.728056,-136.11449,1.585)); +#128422 = VECTOR('',#128423,1.); +#128423 = DIRECTION('',(0.889271535065,-0.457379642008,0.)); +#128424 = ORIENTED_EDGE('',*,*,#128425,.T.); +#128425 = EDGE_CURVE('',#128418,#128426,#128428,.T.); +#128426 = VERTEX_POINT('',#128427); +#128427 = CARTESIAN_POINT('',(129.90611,-136.225878,1.585)); +#128428 = LINE('',#128429,#128430); +#128429 = CARTESIAN_POINT('',(129.877979,-136.1916,1.585)); +#128430 = VECTOR('',#128431,1.); +#128431 = DIRECTION('',(0.634390217262,-0.773012970293,0.)); +#128432 = ORIENTED_EDGE('',*,*,#128433,.T.); +#128433 = EDGE_CURVE('',#128426,#128434,#128436,.T.); +#128434 = VERTEX_POINT('',#128435); +#128435 = CARTESIAN_POINT('',(129.980037,-136.381103,1.585)); +#128436 = LINE('',#128437,#128438); +#128437 = CARTESIAN_POINT('',(129.90611,-136.225878,1.585)); +#128438 = VECTOR('',#128439,1.); +#128439 = DIRECTION('',(0.429982572252,-0.902837187736,0.)); +#128440 = ORIENTED_EDGE('',*,*,#128441,.T.); +#128441 = EDGE_CURVE('',#128434,#128442,#128444,.T.); +#128442 = VERTEX_POINT('',#128443); +#128443 = CARTESIAN_POINT('',(129.983334,-136.403933,1.585)); +#128444 = LINE('',#128445,#128446); +#128445 = CARTESIAN_POINT('',(129.980037,-136.381103,1.585)); +#128446 = VECTOR('',#128447,1.); +#128447 = DIRECTION('',(0.142932451763,-0.989732445782,0.)); +#128448 = ORIENTED_EDGE('',*,*,#128449,.T.); +#128449 = EDGE_CURVE('',#128442,#128450,#128452,.T.); +#128450 = VERTEX_POINT('',#128451); +#128451 = CARTESIAN_POINT('',(129.981413,-137.156775,1.585)); +#128452 = LINE('',#128453,#128454); +#128453 = CARTESIAN_POINT('',(129.983334,-136.403933,1.585)); +#128454 = VECTOR('',#128455,1.); +#128455 = DIRECTION('',(-2.551655920146E-03,-0.999996744521,0.)); +#128456 = ORIENTED_EDGE('',*,*,#128457,.T.); +#128457 = EDGE_CURVE('',#128450,#128458,#128460,.T.); +#128458 = VERTEX_POINT('',#128459); +#128459 = CARTESIAN_POINT('',(129.785255,-137.156775,1.585)); +#128460 = CIRCLE('',#128461,0.100000456609); +#128461 = AXIS2_PLACEMENT_3D('',#128462,#128463,#128464); +#128462 = CARTESIAN_POINT('',(129.883334,-137.137266,1.585)); +#128463 = DIRECTION('',(-0.,0.,-1.)); +#128464 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128465 = ORIENTED_EDGE('',*,*,#128466,.T.); +#128466 = EDGE_CURVE('',#128458,#128467,#128469,.T.); +#128467 = VERTEX_POINT('',#128468); +#128468 = CARTESIAN_POINT('',(129.783334,-136.427541,1.585)); +#128469 = LINE('',#128470,#128471); +#128470 = CARTESIAN_POINT('',(129.785255,-137.156775,1.585)); +#128471 = VECTOR('',#128472,1.); +#128472 = DIRECTION('',(-2.634261889553E-03,0.999996530326,0.)); +#128473 = ORIENTED_EDGE('',*,*,#128474,.T.); +#128474 = EDGE_CURVE('',#128467,#128475,#128477,.T.); +#128475 = VERTEX_POINT('',#128476); +#128476 = CARTESIAN_POINT('',(129.742131,-136.345135,1.585)); +#128477 = LINE('',#128478,#128479); +#128478 = CARTESIAN_POINT('',(129.783334,-136.427541,1.585)); +#128479 = VECTOR('',#128480,1.); +#128480 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#128481 = ORIENTED_EDGE('',*,*,#128482,.T.); +#128482 = EDGE_CURVE('',#128475,#128483,#128485,.T.); +#128483 = VERTEX_POINT('',#128484); +#128484 = CARTESIAN_POINT('',(129.659726,-136.303933,1.585)); +#128485 = LINE('',#128486,#128487); +#128486 = CARTESIAN_POINT('',(129.742131,-136.345135,1.585)); +#128487 = VECTOR('',#128488,1.); +#128488 = DIRECTION('',(-0.894429361803,0.447209253868,0.)); +#128489 = ORIENTED_EDGE('',*,*,#128490,.T.); +#128490 = EDGE_CURVE('',#128483,#128491,#128493,.T.); +#128491 = VERTEX_POINT('',#128492); +#128492 = CARTESIAN_POINT('',(129.506942,-136.303933,1.585)); +#128493 = LINE('',#128494,#128495); +#128494 = CARTESIAN_POINT('',(129.659726,-136.303933,1.585)); +#128495 = VECTOR('',#128496,1.); +#128496 = DIRECTION('',(-1.,0.,0.)); +#128497 = ORIENTED_EDGE('',*,*,#128498,.T.); +#128498 = EDGE_CURVE('',#128491,#128499,#128501,.T.); +#128499 = VERTEX_POINT('',#128500); +#128500 = CARTESIAN_POINT('',(129.409234,-136.352787,1.585)); +#128501 = LINE('',#128502,#128503); +#128502 = CARTESIAN_POINT('',(129.506942,-136.303933,1.585)); +#128503 = VECTOR('',#128504,1.); +#128504 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#128505 = ORIENTED_EDGE('',*,*,#128506,.T.); +#128506 = EDGE_CURVE('',#128499,#128507,#128509,.T.); +#128507 = VERTEX_POINT('',#128508); +#128508 = CARTESIAN_POINT('',(129.383334,-136.378687,1.585)); +#128509 = LINE('',#128510,#128511); +#128510 = CARTESIAN_POINT('',(129.409234,-136.352787,1.585)); +#128511 = VECTOR('',#128512,1.); +#128512 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#128513 = ORIENTED_EDGE('',*,*,#128514,.T.); +#128514 = EDGE_CURVE('',#128507,#128515,#128517,.T.); +#128515 = VERTEX_POINT('',#128516); +#128516 = CARTESIAN_POINT('',(129.381413,-137.156775,1.585)); +#128517 = LINE('',#128518,#128519); +#128518 = CARTESIAN_POINT('',(129.383334,-136.378687,1.585)); +#128519 = VECTOR('',#128520,1.); +#128520 = DIRECTION('',(-2.468864891173E-03,-0.999996952348,0.)); +#128521 = ORIENTED_EDGE('',*,*,#128522,.T.); +#128522 = EDGE_CURVE('',#128515,#128523,#128525,.T.); +#128523 = VERTEX_POINT('',#128524); +#128524 = CARTESIAN_POINT('',(129.185255,-137.156775,1.585)); +#128525 = CIRCLE('',#128526,0.100000456609); +#128526 = AXIS2_PLACEMENT_3D('',#128527,#128528,#128529); +#128527 = CARTESIAN_POINT('',(129.283334,-137.137266,1.585)); +#128528 = DIRECTION('',(-0.,0.,-1.)); +#128529 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#128530 = ORIENTED_EDGE('',*,*,#128531,.T.); +#128531 = EDGE_CURVE('',#128523,#128532,#128534,.T.); +#128532 = VERTEX_POINT('',#128533); +#128533 = CARTESIAN_POINT('',(129.185255,-135.717757,1.585)); +#128534 = LINE('',#128535,#128536); +#128535 = CARTESIAN_POINT('',(129.185255,-137.156775,1.585)); +#128536 = VECTOR('',#128537,1.); +#128537 = DIRECTION('',(0.,1.,0.)); +#128538 = ORIENTED_EDGE('',*,*,#128539,.T.); +#128539 = EDGE_CURVE('',#128532,#128540,#128542,.T.); +#128540 = VERTEX_POINT('',#128541); +#128541 = CARTESIAN_POINT('',(129.200187,-135.681709,1.585)); +#128542 = LINE('',#128543,#128544); +#128543 = CARTESIAN_POINT('',(129.185255,-135.717757,1.585)); +#128544 = VECTOR('',#128545,1.); +#128545 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#128546 = ORIENTED_EDGE('',*,*,#128547,.T.); +#128547 = EDGE_CURVE('',#128540,#128390,#128548,.T.); +#128548 = LINE('',#128549,#128550); +#128549 = CARTESIAN_POINT('',(129.200187,-135.681709,1.585)); +#128550 = VECTOR('',#128551,1.); +#128551 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128552 = PLANE('',#128553); +#128553 = AXIS2_PLACEMENT_3D('',#128554,#128555,#128556); +#128554 = CARTESIAN_POINT('',(0.,0.,1.585)); +#128555 = DIRECTION('',(0.,0.,1.)); +#128556 = DIRECTION('',(1.,0.,-0.)); +#128557 = SHELL_BASED_SURFACE_MODEL('',(#128558)); +#128558 = OPEN_SHELL('',(#128559)); +#128559 = ADVANCED_FACE('',(#128560,#128963),#129038,.T.); +#128560 = FACE_BOUND('',#128561,.F.); +#128561 = EDGE_LOOP('',(#128562,#128572,#128580,#128588,#128596,#128604, + #128613,#128621,#128629,#128637,#128645,#128653,#128661,#128669, + #128677,#128685,#128693,#128701,#128709,#128717,#128725,#128733, + #128741,#128749,#128757,#128765,#128773,#128781,#128789,#128797, + #128805,#128813,#128821,#128829,#128837,#128845,#128853,#128861, + #128869,#128877,#128885,#128893,#128901,#128909,#128917,#128925, + #128933,#128941,#128949,#128957)); +#128562 = ORIENTED_EDGE('',*,*,#128563,.T.); +#128563 = EDGE_CURVE('',#128564,#128566,#128568,.T.); +#128564 = VERTEX_POINT('',#128565); +#128565 = CARTESIAN_POINT('',(100.718274,-134.623926,1.585)); +#128566 = VERTEX_POINT('',#128567); +#128567 = CARTESIAN_POINT('',(100.905046,-134.58657,1.585)); +#128568 = LINE('',#128569,#128570); +#128569 = CARTESIAN_POINT('',(100.718274,-134.623926,1.585)); +#128570 = VECTOR('',#128571,1.); +#128571 = DIRECTION('',(0.98057906023,0.196124212269,0.)); +#128572 = ORIENTED_EDGE('',*,*,#128573,.T.); +#128573 = EDGE_CURVE('',#128566,#128574,#128576,.T.); +#128574 = VERTEX_POINT('',#128575); +#128575 = CARTESIAN_POINT('',(101.278589,-134.58657,1.585)); +#128576 = LINE('',#128577,#128578); +#128577 = CARTESIAN_POINT('',(100.905046,-134.58657,1.585)); +#128578 = VECTOR('',#128579,1.); +#128579 = DIRECTION('',(1.,0.,0.)); +#128580 = ORIENTED_EDGE('',*,*,#128581,.T.); +#128581 = EDGE_CURVE('',#128574,#128582,#128584,.T.); +#128582 = VERTEX_POINT('',#128583); +#128583 = CARTESIAN_POINT('',(101.540064,-134.642604,1.585)); +#128584 = LINE('',#128585,#128586); +#128585 = CARTESIAN_POINT('',(101.278589,-134.58657,1.585)); +#128586 = VECTOR('',#128587,1.); +#128587 = DIRECTION('',(0.977799623007,-0.209542113302,0.)); +#128588 = ORIENTED_EDGE('',*,*,#128589,.T.); +#128589 = EDGE_CURVE('',#128582,#128590,#128592,.T.); +#128590 = VERTEX_POINT('',#128591); +#128591 = CARTESIAN_POINT('',(101.782871,-134.754664,1.585)); +#128592 = LINE('',#128593,#128594); +#128593 = CARTESIAN_POINT('',(101.540064,-134.642604,1.585)); +#128594 = VECTOR('',#128595,1.); +#128595 = DIRECTION('',(0.907966170127,-0.419043474959,0.)); +#128596 = ORIENTED_EDGE('',*,*,#128597,.T.); +#128597 = EDGE_CURVE('',#128590,#128598,#128600,.T.); +#128598 = VERTEX_POINT('',#128599); +#128599 = CARTESIAN_POINT('',(101.91361,-134.848052,1.585)); +#128600 = LINE('',#128601,#128602); +#128601 = CARTESIAN_POINT('',(101.782871,-134.754664,1.585)); +#128602 = VECTOR('',#128603,1.); +#128603 = DIRECTION('',(0.813724639706,-0.581250557621,0.)); +#128604 = ORIENTED_EDGE('',*,*,#128605,.T.); +#128605 = EDGE_CURVE('',#128598,#128606,#128608,.T.); +#128606 = VERTEX_POINT('',#128607); +#128607 = CARTESIAN_POINT('',(102.287149,-135.483078,1.585)); +#128608 = CIRCLE('',#128609,1.016333136587); +#128609 = AXIS2_PLACEMENT_3D('',#128610,#128611,#128612); +#128610 = CARTESIAN_POINT('',(101.28393043297,-135.645821821,1.585)); +#128611 = DIRECTION('',(0.,0.,-1.)); +#128612 = DIRECTION('',(0.619560205568,0.784949139548,0.)); +#128613 = ORIENTED_EDGE('',*,*,#128614,.T.); +#128614 = EDGE_CURVE('',#128606,#128615,#128617,.T.); +#128615 = VERTEX_POINT('',#128616); +#128616 = CARTESIAN_POINT('',(102.305834,-135.912655,1.585)); +#128617 = LINE('',#128618,#128619); +#128618 = CARTESIAN_POINT('',(102.287149,-135.483078,1.585)); +#128619 = VECTOR('',#128620,1.); +#128620 = DIRECTION('',(4.345518899165E-02,-0.999055377119,0.)); +#128621 = ORIENTED_EDGE('',*,*,#128622,.T.); +#128622 = EDGE_CURVE('',#128615,#128623,#128625,.T.); +#128623 = VERTEX_POINT('',#128624); +#128624 = CARTESIAN_POINT('',(100.643568,-135.912655,1.585)); +#128625 = LINE('',#128626,#128627); +#128626 = CARTESIAN_POINT('',(102.305834,-135.912655,1.585)); +#128627 = VECTOR('',#128628,1.); +#128628 = DIRECTION('',(-1.,0.,0.)); +#128629 = ORIENTED_EDGE('',*,*,#128630,.T.); +#128630 = EDGE_CURVE('',#128623,#128631,#128633,.T.); +#128631 = VERTEX_POINT('',#128632); +#128632 = CARTESIAN_POINT('',(100.624889,-135.931327,1.585)); +#128633 = LINE('',#128634,#128635); +#128634 = CARTESIAN_POINT('',(100.643568,-135.912655,1.585)); +#128635 = VECTOR('',#128636,1.); +#128636 = DIRECTION('',(-0.707239288578,-0.70697424896,0.)); +#128637 = ORIENTED_EDGE('',*,*,#128638,.T.); +#128638 = EDGE_CURVE('',#128631,#128639,#128641,.T.); +#128639 = VERTEX_POINT('',#128640); +#128640 = CARTESIAN_POINT('',(100.624889,-136.043388,1.585)); +#128641 = LINE('',#128642,#128643); +#128642 = CARTESIAN_POINT('',(100.624889,-135.931327,1.585)); +#128643 = VECTOR('',#128644,1.); +#128644 = DIRECTION('',(0.,-1.,0.)); +#128645 = ORIENTED_EDGE('',*,*,#128646,.T.); +#128646 = EDGE_CURVE('',#128639,#128647,#128649,.T.); +#128647 = VERTEX_POINT('',#128648); +#128648 = CARTESIAN_POINT('',(100.699598,-136.211487,1.585)); +#128649 = LINE('',#128650,#128651); +#128650 = CARTESIAN_POINT('',(100.624889,-136.043388,1.585)); +#128651 = VECTOR('',#128652,1.); +#128652 = DIRECTION('',(0.406130900234,-0.913814911169,0.)); +#128653 = ORIENTED_EDGE('',*,*,#128654,.T.); +#128654 = EDGE_CURVE('',#128647,#128655,#128657,.T.); +#128655 = VERTEX_POINT('',#128656); +#128656 = CARTESIAN_POINT('',(100.830337,-136.323541,1.585)); +#128657 = LINE('',#128658,#128659); +#128658 = CARTESIAN_POINT('',(100.699598,-136.211487,1.585)); +#128659 = VECTOR('',#128660,1.); +#128660 = DIRECTION('',(0.759279558986,-0.650764589775,0.)); +#128661 = ORIENTED_EDGE('',*,*,#128662,.T.); +#128662 = EDGE_CURVE('',#128655,#128663,#128665,.T.); +#128663 = VERTEX_POINT('',#128664); +#128664 = CARTESIAN_POINT('',(100.942401,-136.379579,1.585)); +#128665 = LINE('',#128666,#128667); +#128666 = CARTESIAN_POINT('',(100.830337,-136.323541,1.585)); +#128667 = VECTOR('',#128668,1.); +#128668 = DIRECTION('',(0.894408035239,-0.447251904971,0.)); +#128669 = ORIENTED_EDGE('',*,*,#128670,.T.); +#128670 = EDGE_CURVE('',#128663,#128671,#128673,.T.); +#128671 = VERTEX_POINT('',#128672); +#128672 = CARTESIAN_POINT('',(100.998435,-136.379579,1.585)); +#128673 = LINE('',#128674,#128675); +#128674 = CARTESIAN_POINT('',(100.942401,-136.379579,1.585)); +#128675 = VECTOR('',#128676,1.); +#128676 = DIRECTION('',(1.,0.,0.)); +#128677 = ORIENTED_EDGE('',*,*,#128678,.T.); +#128678 = EDGE_CURVE('',#128671,#128679,#128681,.T.); +#128679 = VERTEX_POINT('',#128680); +#128680 = CARTESIAN_POINT('',(101.035792,-136.416931,1.585)); +#128681 = LINE('',#128682,#128683); +#128682 = CARTESIAN_POINT('',(100.998435,-136.379579,1.585)); +#128683 = VECTOR('',#128684,1.); +#128684 = DIRECTION('',(0.707154103672,-0.707059455534,0.)); +#128685 = ORIENTED_EDGE('',*,*,#128686,.T.); +#128686 = EDGE_CURVE('',#128679,#128687,#128689,.T.); +#128687 = VERTEX_POINT('',#128688); +#128688 = CARTESIAN_POINT('',(101.297265,-136.416931,1.585)); +#128689 = LINE('',#128690,#128691); +#128690 = CARTESIAN_POINT('',(101.035792,-136.416931,1.585)); +#128691 = VECTOR('',#128692,1.); +#128692 = DIRECTION('',(1.,0.,0.)); +#128693 = ORIENTED_EDGE('',*,*,#128694,.T.); +#128694 = EDGE_CURVE('',#128687,#128695,#128697,.T.); +#128695 = VERTEX_POINT('',#128696); +#128696 = CARTESIAN_POINT('',(101.334616,-136.379579,1.585)); +#128697 = LINE('',#128698,#128699); +#128698 = CARTESIAN_POINT('',(101.297265,-136.416931,1.585)); +#128699 = VECTOR('',#128700,1.); +#128700 = DIRECTION('',(0.707097315549,0.707116246697,0.)); +#128701 = ORIENTED_EDGE('',*,*,#128702,.T.); +#128702 = EDGE_CURVE('',#128695,#128703,#128705,.T.); +#128703 = VERTEX_POINT('',#128704); +#128704 = CARTESIAN_POINT('',(101.39065,-136.379579,1.585)); +#128705 = LINE('',#128706,#128707); +#128706 = CARTESIAN_POINT('',(101.334616,-136.379579,1.585)); +#128707 = VECTOR('',#128708,1.); +#128708 = DIRECTION('',(1.,0.,0.)); +#128709 = ORIENTED_EDGE('',*,*,#128710,.T.); +#128710 = EDGE_CURVE('',#128703,#128711,#128713,.T.); +#128711 = VERTEX_POINT('',#128712); +#128712 = CARTESIAN_POINT('',(101.540064,-136.286189,1.585)); +#128713 = LINE('',#128714,#128715); +#128714 = CARTESIAN_POINT('',(101.39065,-136.379579,1.585)); +#128715 = VECTOR('',#128716,1.); +#128716 = DIRECTION('',(0.847982361522,0.530024447123,0.)); +#128717 = ORIENTED_EDGE('',*,*,#128718,.T.); +#128718 = EDGE_CURVE('',#128711,#128719,#128721,.T.); +#128719 = VERTEX_POINT('',#128720); +#128720 = CARTESIAN_POINT('',(101.577426,-136.286189,1.585)); +#128721 = LINE('',#128722,#128723); +#128722 = CARTESIAN_POINT('',(101.540064,-136.286189,1.585)); +#128723 = VECTOR('',#128724,1.); +#128724 = DIRECTION('',(1.,0.,0.)); +#128725 = ORIENTED_EDGE('',*,*,#128726,.T.); +#128726 = EDGE_CURVE('',#128719,#128727,#128729,.T.); +#128727 = VERTEX_POINT('',#128728); +#128728 = CARTESIAN_POINT('',(101.708163,-136.155451,1.585)); +#128729 = LINE('',#128730,#128731); +#128730 = CARTESIAN_POINT('',(101.577426,-136.286189,1.585)); +#128731 = VECTOR('',#128732,1.); +#128732 = DIRECTION('',(0.707104076882,0.707109485481,0.)); +#128733 = ORIENTED_EDGE('',*,*,#128734,.T.); +#128734 = EDGE_CURVE('',#128727,#128735,#128737,.T.); +#128735 = VERTEX_POINT('',#128736); +#128736 = CARTESIAN_POINT('',(101.764195,-136.192802,1.585)); +#128737 = LINE('',#128738,#128739); +#128738 = CARTESIAN_POINT('',(101.708163,-136.155451,1.585)); +#128739 = VECTOR('',#128740,1.); +#128740 = DIRECTION('',(0.83207542426,-0.554662499492,0.)); +#128741 = ORIENTED_EDGE('',*,*,#128742,.T.); +#128742 = EDGE_CURVE('',#128735,#128743,#128745,.T.); +#128743 = VERTEX_POINT('',#128744); +#128744 = CARTESIAN_POINT('',(101.820222,-136.192802,1.585)); +#128745 = LINE('',#128746,#128747); +#128746 = CARTESIAN_POINT('',(101.764195,-136.192802,1.585)); +#128747 = VECTOR('',#128748,1.); +#128748 = DIRECTION('',(1.,0.,0.)); +#128749 = ORIENTED_EDGE('',*,*,#128750,.T.); +#128750 = EDGE_CURVE('',#128743,#128751,#128753,.T.); +#128751 = VERTEX_POINT('',#128752); +#128752 = CARTESIAN_POINT('',(102.044349,-136.323541,1.585)); +#128753 = LINE('',#128754,#128755); +#128754 = CARTESIAN_POINT('',(101.820222,-136.192802,1.585)); +#128755 = VECTOR('',#128756,1.); +#128756 = DIRECTION('',(0.863781836302,-0.503865993371,0.)); +#128757 = ORIENTED_EDGE('',*,*,#128758,.T.); +#128758 = EDGE_CURVE('',#128751,#128759,#128761,.T.); +#128759 = VERTEX_POINT('',#128760); +#128760 = CARTESIAN_POINT('',(102.081704,-136.323541,1.585)); +#128761 = LINE('',#128762,#128763); +#128762 = CARTESIAN_POINT('',(102.044349,-136.323541,1.585)); +#128763 = VECTOR('',#128764,1.); +#128764 = DIRECTION('',(1.,0.,0.)); +#128765 = ORIENTED_EDGE('',*,*,#128766,.T.); +#128766 = EDGE_CURVE('',#128759,#128767,#128769,.T.); +#128767 = VERTEX_POINT('',#128768); +#128768 = CARTESIAN_POINT('',(102.231119,-136.416931,1.585)); +#128769 = LINE('',#128770,#128771); +#128770 = CARTESIAN_POINT('',(102.081704,-136.323541,1.585)); +#128771 = VECTOR('',#128772,1.); +#128772 = DIRECTION('',(0.847983955873,-0.530021896322,0.)); +#128773 = ORIENTED_EDGE('',*,*,#128774,.T.); +#128774 = EDGE_CURVE('',#128767,#128775,#128777,.T.); +#128775 = VERTEX_POINT('',#128776); +#128776 = CARTESIAN_POINT('',(102.249799,-136.472964,1.585)); +#128777 = LINE('',#128778,#128779); +#128778 = CARTESIAN_POINT('',(102.231119,-136.416931,1.585)); +#128779 = VECTOR('',#128780,1.); +#128780 = DIRECTION('',(0.316263320022,-0.948671445975,0.)); +#128781 = ORIENTED_EDGE('',*,*,#128782,.T.); +#128782 = EDGE_CURVE('',#128775,#128783,#128785,.T.); +#128783 = VERTEX_POINT('',#128784); +#128784 = CARTESIAN_POINT('',(102.175095,-136.585022,1.585)); +#128785 = LINE('',#128786,#128787); +#128786 = CARTESIAN_POINT('',(102.249799,-136.472964,1.585)); +#128787 = VECTOR('',#128788,1.); +#128788 = DIRECTION('',(-0.554693342161,-0.832054863673,0.)); +#128789 = ORIENTED_EDGE('',*,*,#128790,.T.); +#128790 = EDGE_CURVE('',#128783,#128791,#128793,.T.); +#128791 = VERTEX_POINT('',#128792); +#128792 = CARTESIAN_POINT('',(102.006996,-136.753118,1.585)); +#128793 = LINE('',#128794,#128795); +#128794 = CARTESIAN_POINT('',(102.175095,-136.585022,1.585)); +#128795 = VECTOR('',#128796,1.); +#128796 = DIRECTION('',(-0.70711309095,-0.707100471367,0.)); +#128797 = ORIENTED_EDGE('',*,*,#128798,.T.); +#128798 = EDGE_CURVE('',#128791,#128799,#128801,.T.); +#128799 = VERTEX_POINT('',#128800); +#128800 = CARTESIAN_POINT('',(101.876257,-136.846511,1.585)); +#128801 = LINE('',#128802,#128803); +#128802 = CARTESIAN_POINT('',(102.006996,-136.753118,1.585)); +#128803 = VECTOR('',#128804,1.); +#128804 = DIRECTION('',(-0.813709920547,-0.581271163231,0.)); +#128805 = ORIENTED_EDGE('',*,*,#128806,.T.); +#128806 = EDGE_CURVE('',#128799,#128807,#128809,.T.); +#128807 = VERTEX_POINT('',#128808); +#128808 = CARTESIAN_POINT('',(101.558745,-136.97725,1.585)); +#128809 = LINE('',#128810,#128811); +#128810 = CARTESIAN_POINT('',(101.876257,-136.846511,1.585)); +#128811 = VECTOR('',#128812,1.); +#128812 = DIRECTION('',(-0.924679365047,-0.380746729279,0.)); +#128813 = ORIENTED_EDGE('',*,*,#128814,.T.); +#128814 = EDGE_CURVE('',#128807,#128815,#128817,.T.); +#128815 = VERTEX_POINT('',#128816); +#128816 = CARTESIAN_POINT('',(101.353294,-136.995925,1.585)); +#128817 = LINE('',#128818,#128819); +#128818 = CARTESIAN_POINT('',(101.558745,-136.97725,1.585)); +#128819 = VECTOR('',#128820,1.); +#128820 = DIRECTION('',(-0.995894239446,-9.052438256157E-02,0.)); +#128821 = ORIENTED_EDGE('',*,*,#128822,.T.); +#128822 = EDGE_CURVE('',#128815,#128823,#128825,.T.); +#128823 = VERTEX_POINT('',#128824); +#128824 = CARTESIAN_POINT('',(101.334616,-137.014602,1.585)); +#128825 = LINE('',#128826,#128827); +#128826 = CARTESIAN_POINT('',(101.353294,-136.995925,1.585)); +#128827 = VECTOR('',#128828,1.); +#128828 = DIRECTION('',(-0.707125710308,-0.707087851559,0.)); +#128829 = ORIENTED_EDGE('',*,*,#128830,.T.); +#128830 = EDGE_CURVE('',#128823,#128831,#128833,.T.); +#128831 = VERTEX_POINT('',#128832); +#128832 = CARTESIAN_POINT('',(100.867685,-137.014602,1.585)); +#128833 = LINE('',#128834,#128835); +#128834 = CARTESIAN_POINT('',(101.334616,-137.014602,1.585)); +#128835 = VECTOR('',#128836,1.); +#128836 = DIRECTION('',(-1.,0.,0.)); +#128837 = ORIENTED_EDGE('',*,*,#128838,.T.); +#128838 = EDGE_CURVE('',#128831,#128839,#128841,.T.); +#128839 = VERTEX_POINT('',#128840); +#128840 = CARTESIAN_POINT('',(100.849015,-136.995925,1.585)); +#128841 = LINE('',#128842,#128843); +#128842 = CARTESIAN_POINT('',(100.867685,-137.014602,1.585)); +#128843 = VECTOR('',#128844,1.); +#128844 = DIRECTION('',(-0.706974234764,0.707239302768,0.)); +#128845 = ORIENTED_EDGE('',*,*,#128846,.T.); +#128846 = EDGE_CURVE('',#128839,#128847,#128849,.T.); +#128847 = VERTEX_POINT('',#128848); +#128848 = CARTESIAN_POINT('',(100.755632,-136.995925,1.585)); +#128849 = LINE('',#128850,#128851); +#128850 = CARTESIAN_POINT('',(100.849015,-136.995925,1.585)); +#128851 = VECTOR('',#128852,1.); +#128852 = DIRECTION('',(-1.,0.,0.)); +#128853 = ORIENTED_EDGE('',*,*,#128854,.T.); +#128854 = EDGE_CURVE('',#128847,#128855,#128857,.T.); +#128855 = VERTEX_POINT('',#128856); +#128856 = CARTESIAN_POINT('',(100.624889,-136.939891,1.585)); +#128857 = LINE('',#128858,#128859); +#128858 = CARTESIAN_POINT('',(100.755632,-136.995925,1.585)); +#128859 = VECTOR('',#128860,1.); +#128860 = DIRECTION('',(-0.919141757334,0.393926934754,0.)); +#128861 = ORIENTED_EDGE('',*,*,#128862,.T.); +#128862 = EDGE_CURVE('',#128855,#128863,#128865,.T.); +#128863 = VERTEX_POINT('',#128864); +#128864 = CARTESIAN_POINT('',(100.568858,-136.939891,1.585)); +#128865 = LINE('',#128866,#128867); +#128866 = CARTESIAN_POINT('',(100.624889,-136.939891,1.585)); +#128867 = VECTOR('',#128868,1.); +#128868 = DIRECTION('',(-1.,0.,0.)); +#128869 = ORIENTED_EDGE('',*,*,#128870,.T.); +#128870 = EDGE_CURVE('',#128863,#128871,#128873,.T.); +#128871 = VERTEX_POINT('',#128872); +#128872 = CARTESIAN_POINT('',(100.326051,-136.809154,1.585)); +#128873 = LINE('',#128874,#128875); +#128874 = CARTESIAN_POINT('',(100.568858,-136.939891,1.585)); +#128875 = VECTOR('',#128876,1.); +#128876 = DIRECTION('',(-0.880479017668,0.474085118357,0.)); +#128877 = ORIENTED_EDGE('',*,*,#128878,.T.); +#128878 = EDGE_CURVE('',#128871,#128879,#128881,.T.); +#128879 = VERTEX_POINT('',#128880); +#128880 = CARTESIAN_POINT('',(100.045899,-136.547676,1.585)); +#128881 = LINE('',#128882,#128883); +#128882 = CARTESIAN_POINT('',(100.326051,-136.809154,1.585)); +#128883 = VECTOR('',#128884,1.); +#128884 = DIRECTION('',(-0.731051623635,0.682322155276,0.)); +#128885 = ORIENTED_EDGE('',*,*,#128886,.T.); +#128886 = EDGE_CURVE('',#128879,#128887,#128889,.T.); +#128887 = VERTEX_POINT('',#128888); +#128888 = CARTESIAN_POINT('',(99.877799,-136.248834,1.585)); +#128889 = LINE('',#128890,#128891); +#128890 = CARTESIAN_POINT('',(100.045899,-136.547676,1.585)); +#128891 = VECTOR('',#128892,1.); +#128892 = DIRECTION('',(-0.490264285948,0.871573823565,0.)); +#128893 = ORIENTED_EDGE('',*,*,#128894,.T.); +#128894 = EDGE_CURVE('',#128887,#128895,#128897,.T.); +#128895 = VERTEX_POINT('',#128896); +#128896 = CARTESIAN_POINT('',(99.821775,-136.024711,1.585)); +#128897 = LINE('',#128898,#128899); +#128898 = CARTESIAN_POINT('',(99.877799,-136.248834,1.585)); +#128899 = VECTOR('',#128900,1.); +#128900 = DIRECTION('',(-0.242508125298,0.970149374666,0.)); +#128901 = ORIENTED_EDGE('',*,*,#128902,.T.); +#128902 = EDGE_CURVE('',#128895,#128903,#128905,.T.); +#128903 = VERTEX_POINT('',#128904); +#128904 = CARTESIAN_POINT('',(99.803099,-135.78191,1.585)); +#128905 = LINE('',#128906,#128907); +#128906 = CARTESIAN_POINT('',(99.821775,-136.024711,1.585)); +#128907 = VECTOR('',#128908,1.); +#128908 = DIRECTION('',(-7.669241657071E-02,0.997054799517,0.)); +#128909 = ORIENTED_EDGE('',*,*,#128910,.T.); +#128910 = EDGE_CURVE('',#128903,#128911,#128913,.T.); +#128911 = VERTEX_POINT('',#128912); +#128912 = CARTESIAN_POINT('',(99.821775,-135.763233,1.585)); +#128913 = LINE('',#128914,#128915); +#128914 = CARTESIAN_POINT('',(99.803099,-135.78191,1.585)); +#128915 = VECTOR('',#128916,1.); +#128916 = DIRECTION('',(0.707087850545,0.707125711321,0.)); +#128917 = ORIENTED_EDGE('',*,*,#128918,.T.); +#128918 = EDGE_CURVE('',#128911,#128919,#128921,.T.); +#128919 = VERTEX_POINT('',#128920); +#128920 = CARTESIAN_POINT('',(99.840449,-135.501753,1.585)); +#128921 = LINE('',#128922,#128923); +#128922 = CARTESIAN_POINT('',(99.821775,-135.763233,1.585)); +#128923 = VECTOR('',#128924,1.); +#128924 = DIRECTION('',(7.123512188196E-02,0.997459551767,0.)); +#128925 = ORIENTED_EDGE('',*,*,#128926,.T.); +#128926 = EDGE_CURVE('',#128919,#128927,#128929,.T.); +#128927 = VERTEX_POINT('',#128928); +#128928 = CARTESIAN_POINT('',(99.952508,-135.221594,1.585)); +#128929 = LINE('',#128930,#128931); +#128930 = CARTESIAN_POINT('',(99.840449,-135.501753,1.585)); +#128931 = VECTOR('',#128932,1.); +#128932 = DIRECTION('',(0.371377534097,0.92848194768,0.)); +#128933 = ORIENTED_EDGE('',*,*,#128934,.T.); +#128934 = EDGE_CURVE('',#128927,#128935,#128937,.T.); +#128935 = VERTEX_POINT('',#128936); +#128936 = CARTESIAN_POINT('',(100.101929,-135.016147,1.585)); +#128937 = LINE('',#128938,#128939); +#128938 = CARTESIAN_POINT('',(99.952508,-135.221594,1.585)); +#128939 = VECTOR('',#128940,1.); +#128940 = DIRECTION('',(0.588184570774,0.808726721892,0.)); +#128941 = ORIENTED_EDGE('',*,*,#128942,.T.); +#128942 = EDGE_CURVE('',#128935,#128943,#128945,.T.); +#128943 = VERTEX_POINT('',#128944); +#128944 = CARTESIAN_POINT('',(100.326051,-134.810694,1.585)); +#128945 = LINE('',#128946,#128947); +#128946 = CARTESIAN_POINT('',(100.101929,-135.016147,1.585)); +#128947 = VECTOR('',#128948,1.); +#128948 = DIRECTION('',(0.737141306692,0.675738628442,0.)); +#128949 = ORIENTED_EDGE('',*,*,#128950,.T.); +#128950 = EDGE_CURVE('',#128943,#128951,#128953,.T.); +#128951 = VERTEX_POINT('',#128952); +#128952 = CARTESIAN_POINT('',(100.512822,-134.69863,1.585)); +#128953 = LINE('',#128954,#128955); +#128954 = CARTESIAN_POINT('',(100.326051,-134.810694,1.585)); +#128955 = VECTOR('',#128956,1.); +#128956 = DIRECTION('',(0.857490090001,0.514500481584,0.)); +#128957 = ORIENTED_EDGE('',*,*,#128958,.T.); +#128958 = EDGE_CURVE('',#128951,#128564,#128959,.T.); +#128959 = LINE('',#128960,#128961); +#128960 = CARTESIAN_POINT('',(100.512822,-134.69863,1.585)); +#128961 = VECTOR('',#128962,1.); +#128962 = DIRECTION('',(0.939801970818,0.341719557016,0.)); +#128963 = FACE_BOUND('',#128964,.F.); +#128964 = EDGE_LOOP('',(#128965,#128976,#128984,#128992,#129000,#129008, + #129016,#129024,#129032)); +#128965 = ORIENTED_EDGE('',*,*,#128966,.T.); +#128966 = EDGE_CURVE('',#128967,#128969,#128971,.T.); +#128967 = VERTEX_POINT('',#128968); +#128968 = CARTESIAN_POINT('',(101.353294,-135.146882,1.585)); +#128969 = VERTEX_POINT('',#128970); +#128970 = CARTESIAN_POINT('',(100.830337,-135.146882,1.585)); +#128971 = CIRCLE('',#128972,0.537898577025); +#128972 = AXIS2_PLACEMENT_3D('',#128973,#128974,#128975); +#128973 = CARTESIAN_POINT('',(101.0918155,-135.6169499453,1.585)); +#128974 = DIRECTION('',(0.,0.,1.)); +#128975 = DIRECTION('',(0.486111157695,0.873896986129,-0.)); +#128976 = ORIENTED_EDGE('',*,*,#128977,.T.); +#128977 = EDGE_CURVE('',#128969,#128978,#128980,.T.); +#128978 = VERTEX_POINT('',#128979); +#128979 = CARTESIAN_POINT('',(100.736954,-135.221594,1.585)); +#128980 = LINE('',#128981,#128982); +#128981 = CARTESIAN_POINT('',(100.830337,-135.146882,1.585)); +#128982 = VECTOR('',#128983,1.); +#128983 = DIRECTION('',(-0.780845967048,-0.624723599478,0.)); +#128984 = ORIENTED_EDGE('',*,*,#128985,.T.); +#128985 = EDGE_CURVE('',#128978,#128986,#128988,.T.); +#128986 = VERTEX_POINT('',#128987); +#128987 = CARTESIAN_POINT('',(100.643568,-135.389689,1.585)); +#128988 = LINE('',#128989,#128990); +#128989 = CARTESIAN_POINT('',(100.736954,-135.221594,1.585)); +#128990 = VECTOR('',#128991,1.); +#128991 = DIRECTION('',(-0.485642489637,-0.874157521422,0.)); +#128992 = ORIENTED_EDGE('',*,*,#128993,.T.); +#128993 = EDGE_CURVE('',#128986,#128994,#128996,.T.); +#128994 = VERTEX_POINT('',#128995); +#128995 = CARTESIAN_POINT('',(100.662238,-135.483078,1.585)); +#128996 = LINE('',#128997,#128998); +#128997 = CARTESIAN_POINT('',(100.643568,-135.389689,1.585)); +#128998 = VECTOR('',#128999,1.); +#128999 = DIRECTION('',(0.196037383548,-0.98059642272,0.)); +#129000 = ORIENTED_EDGE('',*,*,#129001,.T.); +#129001 = EDGE_CURVE('',#128994,#129002,#129004,.T.); +#129002 = VERTEX_POINT('',#129003); +#129003 = CARTESIAN_POINT('',(101.52139,-135.483078,1.585)); +#129004 = LINE('',#129005,#129006); +#129005 = CARTESIAN_POINT('',(100.662238,-135.483078,1.585)); +#129006 = VECTOR('',#129007,1.); +#129007 = DIRECTION('',(1.,0.,0.)); +#129008 = ORIENTED_EDGE('',*,*,#129009,.T.); +#129009 = EDGE_CURVE('',#129002,#129010,#129012,.T.); +#129010 = VERTEX_POINT('',#129011); +#129011 = CARTESIAN_POINT('',(101.540064,-135.464395,1.585)); +#129012 = LINE('',#129013,#129014); +#129013 = CARTESIAN_POINT('',(101.52139,-135.483078,1.585)); +#129014 = VECTOR('',#129015,1.); +#129015 = DIRECTION('',(0.706936405422,0.70727711591,0.)); +#129016 = ORIENTED_EDGE('',*,*,#129017,.T.); +#129017 = EDGE_CURVE('',#129010,#129018,#129020,.T.); +#129018 = VERTEX_POINT('',#129019); +#129019 = CARTESIAN_POINT('',(101.540064,-135.389689,1.585)); +#129020 = LINE('',#129021,#129022); +#129021 = CARTESIAN_POINT('',(101.540064,-135.464395,1.585)); +#129022 = VECTOR('',#129023,1.); +#129023 = DIRECTION('',(0.,1.,0.)); +#129024 = ORIENTED_EDGE('',*,*,#129025,.T.); +#129025 = EDGE_CURVE('',#129018,#129026,#129028,.T.); +#129026 = VERTEX_POINT('',#129027); +#129027 = CARTESIAN_POINT('',(101.48404,-135.277626,1.585)); +#129028 = LINE('',#129029,#129030); +#129029 = CARTESIAN_POINT('',(101.540064,-135.389689,1.585)); +#129030 = VECTOR('',#129031,1.); +#129031 = DIRECTION('',(-0.447165704772,0.894451134761,0.)); +#129032 = ORIENTED_EDGE('',*,*,#129033,.T.); +#129033 = EDGE_CURVE('',#129026,#128967,#129034,.T.); +#129034 = LINE('',#129035,#129036); +#129035 = CARTESIAN_POINT('',(101.48404,-135.277626,1.585)); +#129036 = VECTOR('',#129037,1.); +#129037 = DIRECTION('',(-0.707112189455,0.707101372877,0.)); +#129038 = PLANE('',#129039); +#129039 = AXIS2_PLACEMENT_3D('',#129040,#129041,#129042); +#129040 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129041 = DIRECTION('',(0.,0.,1.)); +#129042 = DIRECTION('',(1.,0.,-0.)); +#129043 = SHELL_BASED_SURFACE_MODEL('',(#129044)); +#129044 = OPEN_SHELL('',(#129045)); +#129045 = ADVANCED_FACE('',(#129046,#129377),#129467,.T.); +#129046 = FACE_BOUND('',#129047,.F.); +#129047 = EDGE_LOOP('',(#129048,#129058,#129066,#129074,#129082,#129091, + #129099,#129107,#129115,#129123,#129131,#129139,#129147,#129155, + #129163,#129171,#129179,#129187,#129195,#129203,#129211,#129219, + #129227,#129235,#129243,#129251,#129259,#129267,#129275,#129283, + #129291,#129299,#129307,#129315,#129323,#129331,#129339,#129347, + #129355,#129363,#129371)); +#129048 = ORIENTED_EDGE('',*,*,#129049,.T.); +#129049 = EDGE_CURVE('',#129050,#129052,#129054,.T.); +#129050 = VERTEX_POINT('',#129051); +#129051 = CARTESIAN_POINT('',(107.722203,-134.642604,1.585)); +#129052 = VERTEX_POINT('',#129053); +#129053 = CARTESIAN_POINT('',(107.983684,-134.58657,1.585)); +#129054 = LINE('',#129055,#129056); +#129055 = CARTESIAN_POINT('',(107.722203,-134.642604,1.585)); +#129056 = VECTOR('',#129057,1.); +#129057 = DIRECTION('',(0.97780060815,0.209537516214,0.)); +#129058 = ORIENTED_EDGE('',*,*,#129059,.T.); +#129059 = EDGE_CURVE('',#129052,#129060,#129062,.T.); +#129060 = VERTEX_POINT('',#129061); +#129061 = CARTESIAN_POINT('',(108.338556,-134.58657,1.585)); +#129062 = LINE('',#129063,#129064); +#129063 = CARTESIAN_POINT('',(107.983684,-134.58657,1.585)); +#129064 = VECTOR('',#129065,1.); +#129065 = DIRECTION('',(1.,0.,0.)); +#129066 = ORIENTED_EDGE('',*,*,#129067,.T.); +#129067 = EDGE_CURVE('',#129060,#129068,#129070,.T.); +#129068 = VERTEX_POINT('',#129069); +#129069 = CARTESIAN_POINT('',(108.357233,-134.605251,1.585)); +#129070 = LINE('',#129071,#129072); +#129071 = CARTESIAN_POINT('',(108.338556,-134.58657,1.585)); +#129072 = VECTOR('',#129073,1.); +#129073 = DIRECTION('',(0.707031065716,-0.70718248855,0.)); +#129074 = ORIENTED_EDGE('',*,*,#129075,.T.); +#129075 = EDGE_CURVE('',#129068,#129076,#129078,.T.); +#129076 = VERTEX_POINT('',#129077); +#129077 = CARTESIAN_POINT('',(108.562671,-134.623926,1.585)); +#129078 = LINE('',#129079,#129080); +#129079 = CARTESIAN_POINT('',(108.357233,-134.605251,1.585)); +#129080 = VECTOR('',#129081,1.); +#129081 = DIRECTION('',(0.995893723006,-9.053006394693E-02,0.)); +#129082 = ORIENTED_EDGE('',*,*,#129083,.T.); +#129083 = EDGE_CURVE('',#129076,#129084,#129086,.T.); +#129084 = VERTEX_POINT('',#129085); +#129085 = CARTESIAN_POINT('',(109.085637,-134.922758,1.585)); +#129086 = CIRCLE('',#129087,1.146020975985); +#129087 = AXIS2_PLACEMENT_3D('',#129088,#129089,#129090); +#129088 = CARTESIAN_POINT('',(108.27556019975,-135.7333995083,1.585)); +#129089 = DIRECTION('',(0.,0.,-1.)); +#129090 = DIRECTION('',(0.250528398927,0.968109250721,0.)); +#129091 = ORIENTED_EDGE('',*,*,#129092,.T.); +#129092 = EDGE_CURVE('',#129084,#129093,#129095,.T.); +#129093 = VERTEX_POINT('',#129094); +#129094 = CARTESIAN_POINT('',(109.253732,-135.146882,1.585)); +#129095 = LINE('',#129096,#129097); +#129096 = CARTESIAN_POINT('',(109.085637,-134.922758,1.585)); +#129097 = VECTOR('',#129098,1.); +#129098 = DIRECTION('',(0.60000456887,-0.799996573327,0.)); +#129099 = ORIENTED_EDGE('',*,*,#129100,.T.); +#129100 = EDGE_CURVE('',#129093,#129101,#129103,.T.); +#129101 = VERTEX_POINT('',#129102); +#129102 = CARTESIAN_POINT('',(109.328435,-135.314983,1.585)); +#129103 = LINE('',#129104,#129105); +#129104 = CARTESIAN_POINT('',(109.253732,-135.146882,1.585)); +#129105 = VECTOR('',#129106,1.); +#129106 = DIRECTION('',(0.406099627759,-0.913828809096,0.)); +#129107 = ORIENTED_EDGE('',*,*,#129108,.T.); +#129108 = EDGE_CURVE('',#129101,#129109,#129111,.T.); +#129109 = VERTEX_POINT('',#129110); +#129110 = CARTESIAN_POINT('',(109.384474,-135.52043,1.585)); +#129111 = LINE('',#129112,#129113); +#129112 = CARTESIAN_POINT('',(109.328435,-135.314983,1.585)); +#129113 = VECTOR('',#129114,1.); +#129114 = DIRECTION('',(0.263152371858,-0.964754284357,0.)); +#129115 = ORIENTED_EDGE('',*,*,#129116,.T.); +#129116 = EDGE_CURVE('',#129109,#129117,#129119,.T.); +#129117 = VERTEX_POINT('',#129118); +#129118 = CARTESIAN_POINT('',(109.403146,-135.893978,1.585)); +#129119 = LINE('',#129120,#129121); +#129120 = CARTESIAN_POINT('',(109.384474,-135.52043,1.585)); +#129121 = VECTOR('',#129122,1.); +#129122 = DIRECTION('',(4.99232149958E-02,-0.998753058871,0.)); +#129123 = ORIENTED_EDGE('',*,*,#129124,.T.); +#129124 = EDGE_CURVE('',#129117,#129125,#129127,.T.); +#129125 = VERTEX_POINT('',#129126); +#129126 = CARTESIAN_POINT('',(109.384474,-135.912655,1.585)); +#129127 = LINE('',#129128,#129129); +#129128 = CARTESIAN_POINT('',(109.403146,-135.893978,1.585)); +#129129 = VECTOR('',#129130,1.); +#129130 = DIRECTION('',(-0.707012112775,-0.707201436926,0.)); +#129131 = ORIENTED_EDGE('',*,*,#129132,.T.); +#129132 = EDGE_CURVE('',#129125,#129133,#129135,.T.); +#129133 = VERTEX_POINT('',#129134); +#129134 = CARTESIAN_POINT('',(107.703527,-135.912655,1.585)); +#129135 = LINE('',#129136,#129137); +#129136 = CARTESIAN_POINT('',(109.384474,-135.912655,1.585)); +#129137 = VECTOR('',#129138,1.); +#129138 = DIRECTION('',(-1.,0.,0.)); +#129139 = ORIENTED_EDGE('',*,*,#129140,.T.); +#129140 = EDGE_CURVE('',#129133,#129141,#129143,.T.); +#129141 = VERTEX_POINT('',#129142); +#129142 = CARTESIAN_POINT('',(107.684852,-135.931327,1.585)); +#129143 = LINE('',#129144,#129145); +#129144 = CARTESIAN_POINT('',(107.703527,-135.912655,1.585)); +#129145 = VECTOR('',#129146,1.); +#129146 = DIRECTION('',(-0.707163579192,-0.707049978618,0.)); +#129147 = ORIENTED_EDGE('',*,*,#129148,.T.); +#129148 = EDGE_CURVE('',#129141,#129149,#129151,.T.); +#129149 = VERTEX_POINT('',#129150); +#129150 = CARTESIAN_POINT('',(107.703527,-136.080742,1.585)); +#129151 = LINE('',#129152,#129153); +#129152 = CARTESIAN_POINT('',(107.684852,-135.931327,1.585)); +#129153 = VECTOR('',#129154,1.); +#129154 = DIRECTION('',(0.124022474094,-0.992279409199,0.)); +#129155 = ORIENTED_EDGE('',*,*,#129156,.T.); +#129156 = EDGE_CURVE('',#129149,#129157,#129159,.T.); +#129157 = VERTEX_POINT('',#129158); +#129158 = CARTESIAN_POINT('',(107.759564,-136.192802,1.585)); +#129159 = LINE('',#129160,#129161); +#129160 = CARTESIAN_POINT('',(107.703527,-136.080742,1.585)); +#129161 = VECTOR('',#129162,1.); +#129162 = DIRECTION('',(0.447258291239,-0.894404841734,0.)); +#129163 = ORIENTED_EDGE('',*,*,#129164,.T.); +#129164 = EDGE_CURVE('',#129157,#129165,#129167,.T.); +#129165 = VERTEX_POINT('',#129166); +#129166 = CARTESIAN_POINT('',(107.92765,-136.342221,1.585)); +#129167 = LINE('',#129168,#129169); +#129168 = CARTESIAN_POINT('',(107.759564,-136.192802,1.585)); +#129169 = VECTOR('',#129170,1.); +#129170 = DIRECTION('',(0.747388956577,-0.664386745492,0.)); +#129171 = ORIENTED_EDGE('',*,*,#129172,.T.); +#129172 = EDGE_CURVE('',#129165,#129173,#129175,.T.); +#129173 = VERTEX_POINT('',#129174); +#129174 = CARTESIAN_POINT('',(108.058396,-136.379579,1.585)); +#129175 = LINE('',#129176,#129177); +#129176 = CARTESIAN_POINT('',(107.92765,-136.342221,1.585)); +#129177 = VECTOR('',#129178,1.); +#129178 = DIRECTION('',(0.961520062356,-0.27473472603,0.)); +#129179 = ORIENTED_EDGE('',*,*,#129180,.T.); +#129180 = EDGE_CURVE('',#129173,#129181,#129183,.T.); +#129181 = VERTEX_POINT('',#129182); +#129182 = CARTESIAN_POINT('',(108.095754,-136.416931,1.585)); +#129183 = LINE('',#129184,#129185); +#129184 = CARTESIAN_POINT('',(108.058396,-136.379579,1.585)); +#129185 = VECTOR('',#129186,1.); +#129186 = DIRECTION('',(0.707163567029,-0.707049990783,0.)); +#129187 = ORIENTED_EDGE('',*,*,#129188,.T.); +#129188 = EDGE_CURVE('',#129181,#129189,#129191,.T.); +#129189 = VERTEX_POINT('',#129190); +#129190 = CARTESIAN_POINT('',(108.375903,-136.416931,1.585)); +#129191 = LINE('',#129192,#129193); +#129192 = CARTESIAN_POINT('',(108.095754,-136.416931,1.585)); +#129193 = VECTOR('',#129194,1.); +#129194 = DIRECTION('',(1.,0.,0.)); +#129195 = ORIENTED_EDGE('',*,*,#129196,.T.); +#129196 = EDGE_CURVE('',#129189,#129197,#129199,.T.); +#129197 = VERTEX_POINT('',#129198); +#129198 = CARTESIAN_POINT('',(108.413261,-136.379579,1.585)); +#129199 = LINE('',#129200,#129201); +#129200 = CARTESIAN_POINT('',(108.375903,-136.416931,1.585)); +#129201 = VECTOR('',#129202,1.); +#129202 = DIRECTION('',(0.707163567029,0.707049990783,0.)); +#129203 = ORIENTED_EDGE('',*,*,#129204,.T.); +#129204 = EDGE_CURVE('',#129197,#129205,#129207,.T.); +#129205 = VERTEX_POINT('',#129206); +#129206 = CARTESIAN_POINT('',(108.562671,-136.342221,1.585)); +#129207 = LINE('',#129208,#129209); +#129208 = CARTESIAN_POINT('',(108.413261,-136.379579,1.585)); +#129209 = VECTOR('',#129210,1.); +#129210 = DIRECTION('',(0.970134096728,0.242569236233,0.)); +#129211 = ORIENTED_EDGE('',*,*,#129212,.T.); +#129212 = EDGE_CURVE('',#129205,#129213,#129215,.T.); +#129213 = VERTEX_POINT('',#129214); +#129214 = CARTESIAN_POINT('',(108.805477,-136.155451,1.585)); +#129215 = LINE('',#129216,#129217); +#129216 = CARTESIAN_POINT('',(108.562671,-136.342221,1.585)); +#129217 = VECTOR('',#129218,1.); +#129218 = DIRECTION('',(0.792630056832,0.609702872723,0.)); +#129219 = ORIENTED_EDGE('',*,*,#129220,.T.); +#129220 = EDGE_CURVE('',#129213,#129221,#129223,.T.); +#129221 = VERTEX_POINT('',#129222); +#129222 = CARTESIAN_POINT('',(109.309767,-136.416931,1.585)); +#129223 = LINE('',#129224,#129225); +#129224 = CARTESIAN_POINT('',(108.805477,-136.155451,1.585)); +#129225 = VECTOR('',#129226,1.); +#129226 = DIRECTION('',(0.887757195838,-0.460312025953,0.)); +#129227 = ORIENTED_EDGE('',*,*,#129228,.T.); +#129228 = EDGE_CURVE('',#129221,#129229,#129231,.T.); +#129229 = VERTEX_POINT('',#129230); +#129230 = CARTESIAN_POINT('',(109.347119,-136.454291,1.585)); +#129231 = LINE('',#129232,#129233); +#129232 = CARTESIAN_POINT('',(109.309767,-136.416931,1.585)); +#129233 = VECTOR('',#129234,1.); +#129234 = DIRECTION('',(0.707031061663,-0.707182492603,0.)); +#129235 = ORIENTED_EDGE('',*,*,#129236,.T.); +#129236 = EDGE_CURVE('',#129229,#129237,#129239,.T.); +#129237 = VERTEX_POINT('',#129238); +#129238 = CARTESIAN_POINT('',(109.216381,-136.641059,1.585)); +#129239 = LINE('',#129240,#129241); +#129240 = CARTESIAN_POINT('',(109.347119,-136.454291,1.585)); +#129241 = VECTOR('',#129242,1.); +#129242 = DIRECTION('',(-0.573463521908,-0.819231096236,0.)); +#129243 = ORIENTED_EDGE('',*,*,#129244,.T.); +#129244 = EDGE_CURVE('',#129237,#129245,#129247,.T.); +#129245 = VERTEX_POINT('',#129246); +#129246 = CARTESIAN_POINT('',(108.936211,-136.846511,1.585)); +#129247 = LINE('',#129248,#129249); +#129248 = CARTESIAN_POINT('',(109.216381,-136.641059,1.585)); +#129249 = VECTOR('',#129250,1.); +#129250 = DIRECTION('',(-0.806413231375,-0.59135243321,0.)); +#129251 = ORIENTED_EDGE('',*,*,#129252,.T.); +#129252 = EDGE_CURVE('',#129245,#129253,#129255,.T.); +#129253 = VERTEX_POINT('',#129254); +#129254 = CARTESIAN_POINT('',(108.618703,-136.97725,1.585)); +#129255 = LINE('',#129256,#129257); +#129256 = CARTESIAN_POINT('',(108.936211,-136.846511,1.585)); +#129257 = VECTOR('',#129258,1.); +#129258 = DIRECTION('',(-0.924677676277,-0.380750830589,0.)); +#129259 = ORIENTED_EDGE('',*,*,#129260,.T.); +#129260 = EDGE_CURVE('',#129253,#129261,#129263,.T.); +#129261 = VERTEX_POINT('',#129262); +#129262 = CARTESIAN_POINT('',(108.431933,-137.014602,1.585)); +#129263 = LINE('',#129264,#129265); +#129264 = CARTESIAN_POINT('',(108.618703,-136.97725,1.585)); +#129265 = VECTOR('',#129266,1.); +#129266 = DIRECTION('',(-0.980582694952,-0.19610603856,0.)); +#129267 = ORIENTED_EDGE('',*,*,#129268,.T.); +#129268 = EDGE_CURVE('',#129261,#129269,#129271,.T.); +#129269 = VERTEX_POINT('',#129270); +#129270 = CARTESIAN_POINT('',(107.92765,-137.014602,1.585)); +#129271 = LINE('',#129272,#129273); +#129272 = CARTESIAN_POINT('',(108.431933,-137.014602,1.585)); +#129273 = VECTOR('',#129274,1.); +#129274 = DIRECTION('',(-1.,0.,0.)); +#129275 = ORIENTED_EDGE('',*,*,#129276,.T.); +#129276 = EDGE_CURVE('',#129269,#129277,#129279,.T.); +#129277 = VERTEX_POINT('',#129278); +#129278 = CARTESIAN_POINT('',(107.610144,-136.921217,1.585)); +#129279 = LINE('',#129280,#129281); +#129280 = CARTESIAN_POINT('',(107.92765,-137.014602,1.585)); +#129281 = VECTOR('',#129282,1.); +#129282 = DIRECTION('',(-0.959364779857,0.282168777809,0.)); +#129283 = ORIENTED_EDGE('',*,*,#129284,.T.); +#129284 = EDGE_CURVE('',#129277,#129285,#129287,.T.); +#129285 = VERTEX_POINT('',#129286); +#129286 = CARTESIAN_POINT('',(107.367339,-136.771798,1.585)); +#129287 = LINE('',#129288,#129289); +#129288 = CARTESIAN_POINT('',(107.610144,-136.921217,1.585)); +#129289 = VECTOR('',#129290,1.); +#129290 = DIRECTION('',(-0.85165747368,0.524098795576,0.)); +#129291 = ORIENTED_EDGE('',*,*,#129292,.T.); +#129292 = EDGE_CURVE('',#129285,#129293,#129295,.T.); +#129293 = VERTEX_POINT('',#129294); +#129294 = CARTESIAN_POINT('',(107.049829,-136.454291,1.585)); +#129295 = LINE('',#129296,#129297); +#129296 = CARTESIAN_POINT('',(107.367339,-136.771798,1.585)); +#129297 = VECTOR('',#129298,1.); +#129298 = DIRECTION('',(-0.707110121751,0.707103440606,0.)); +#129299 = ORIENTED_EDGE('',*,*,#129300,.T.); +#129300 = EDGE_CURVE('',#129293,#129301,#129303,.T.); +#129301 = VERTEX_POINT('',#129302); +#129302 = CARTESIAN_POINT('',(107.049829,-136.416931,1.585)); +#129303 = LINE('',#129304,#129305); +#129304 = CARTESIAN_POINT('',(107.049829,-136.454291,1.585)); +#129305 = VECTOR('',#129306,1.); +#129306 = DIRECTION('',(0.,1.,0.)); +#129307 = ORIENTED_EDGE('',*,*,#129308,.T.); +#129308 = EDGE_CURVE('',#129301,#129309,#129311,.T.); +#129309 = VERTEX_POINT('',#129310); +#129310 = CARTESIAN_POINT('',(106.919087,-136.155451,1.585)); +#129311 = LINE('',#129312,#129313); +#129312 = CARTESIAN_POINT('',(107.049829,-136.416931,1.585)); +#129313 = VECTOR('',#129314,1.); +#129314 = DIRECTION('',(-0.447219068488,0.894424454485,0.)); +#129315 = ORIENTED_EDGE('',*,*,#129316,.T.); +#129316 = EDGE_CURVE('',#129309,#129317,#129319,.T.); +#129317 = VERTEX_POINT('',#129318); +#129318 = CARTESIAN_POINT('',(106.900419,-135.968676,1.585)); +#129319 = LINE('',#129320,#129321); +#129320 = CARTESIAN_POINT('',(106.919087,-136.155451,1.585)); +#129321 = VECTOR('',#129322,1.); +#129322 = DIRECTION('',(-9.945360882754E-02,0.995042199955,0.)); +#129323 = ORIENTED_EDGE('',*,*,#129324,.T.); +#129324 = EDGE_CURVE('',#129317,#129325,#129327,.T.); +#129325 = VERTEX_POINT('',#129326); +#129326 = CARTESIAN_POINT('',(106.88174,-135.95,1.585)); +#129327 = LINE('',#129328,#129329); +#129328 = CARTESIAN_POINT('',(106.900419,-135.968676,1.585)); +#129329 = VECTOR('',#129330,1.); +#129330 = DIRECTION('',(-0.707163567029,0.707049990783,0.)); +#129331 = ORIENTED_EDGE('',*,*,#129332,.T.); +#129332 = EDGE_CURVE('',#129325,#129333,#129335,.T.); +#129333 = VERTEX_POINT('',#129334); +#129334 = CARTESIAN_POINT('',(106.88174,-135.66985,1.585)); +#129335 = LINE('',#129336,#129337); +#129336 = CARTESIAN_POINT('',(106.88174,-135.95,1.585)); +#129337 = VECTOR('',#129338,1.); +#129338 = DIRECTION('',(0.,1.,0.)); +#129339 = ORIENTED_EDGE('',*,*,#129340,.T.); +#129340 = EDGE_CURVE('',#129333,#129341,#129343,.T.); +#129341 = VERTEX_POINT('',#129342); +#129342 = CARTESIAN_POINT('',(106.937767,-135.408364,1.585)); +#129343 = LINE('',#129344,#129345); +#129344 = CARTESIAN_POINT('',(106.88174,-135.66985,1.585)); +#129345 = VECTOR('',#129346,1.); +#129346 = DIRECTION('',(0.209508658666,0.977806791725,0.)); +#129347 = ORIENTED_EDGE('',*,*,#129348,.T.); +#129348 = EDGE_CURVE('',#129341,#129349,#129351,.T.); +#129349 = VERTEX_POINT('',#129350); +#129350 = CARTESIAN_POINT('',(107.087188,-135.12821,1.585)); +#129351 = LINE('',#129352,#129353); +#129352 = CARTESIAN_POINT('',(106.937767,-135.408364,1.585)); +#129353 = VECTOR('',#129354,1.); +#129354 = DIRECTION('',(0.470601803164,0.882345704845,0.)); +#129355 = ORIENTED_EDGE('',*,*,#129356,.T.); +#129356 = EDGE_CURVE('',#129349,#129357,#129359,.T.); +#129357 = VERTEX_POINT('',#129358); +#129358 = CARTESIAN_POINT('',(107.348665,-134.848052,1.585)); +#129359 = LINE('',#129360,#129361); +#129360 = CARTESIAN_POINT('',(107.087188,-135.12821,1.585)); +#129361 = VECTOR('',#129362,1.); +#129362 = DIRECTION('',(0.682312950851,0.731060214415,0.)); +#129363 = ORIENTED_EDGE('',*,*,#129364,.T.); +#129364 = EDGE_CURVE('',#129357,#129365,#129367,.T.); +#129365 = VERTEX_POINT('',#129366); +#129366 = CARTESIAN_POINT('',(107.516754,-134.735986,1.585)); +#129367 = LINE('',#129368,#129369); +#129368 = CARTESIAN_POINT('',(107.348665,-134.848052,1.585)); +#129369 = VECTOR('',#129370,1.); +#129370 = DIRECTION('',(0.832035063355,0.554723042019,0.)); +#129371 = ORIENTED_EDGE('',*,*,#129372,.T.); +#129372 = EDGE_CURVE('',#129365,#129050,#129373,.T.); +#129373 = LINE('',#129374,#129375); +#129374 = CARTESIAN_POINT('',(107.516754,-134.735986,1.585)); +#129375 = VECTOR('',#129376,1.); +#129376 = DIRECTION('',(0.910373002656,0.413788588575,0.)); +#129377 = FACE_BOUND('',#129378,.F.); +#129378 = EDGE_LOOP('',(#129379,#129389,#129397,#129405,#129413,#129421, + #129429,#129437,#129445,#129453,#129461)); +#129379 = ORIENTED_EDGE('',*,*,#129380,.T.); +#129380 = EDGE_CURVE('',#129381,#129383,#129385,.T.); +#129381 = VERTEX_POINT('',#129382); +#129382 = CARTESIAN_POINT('',(108.394584,-135.12821,1.585)); +#129383 = VERTEX_POINT('',#129384); +#129384 = CARTESIAN_POINT('',(108.282521,-135.090853,1.585)); +#129385 = LINE('',#129386,#129387); +#129386 = CARTESIAN_POINT('',(108.394584,-135.12821,1.585)); +#129387 = VECTOR('',#129388,1.); +#129388 = DIRECTION('',(-0.948676525382,0.316248083298,0.)); +#129389 = ORIENTED_EDGE('',*,*,#129390,.T.); +#129390 = EDGE_CURVE('',#129383,#129391,#129393,.T.); +#129391 = VERTEX_POINT('',#129392); +#129392 = CARTESIAN_POINT('',(108.077073,-135.090853,1.585)); +#129393 = LINE('',#129394,#129395); +#129394 = CARTESIAN_POINT('',(108.282521,-135.090853,1.585)); +#129395 = VECTOR('',#129396,1.); +#129396 = DIRECTION('',(-1.,0.,0.)); +#129397 = ORIENTED_EDGE('',*,*,#129398,.T.); +#129398 = EDGE_CURVE('',#129391,#129399,#129401,.T.); +#129399 = VERTEX_POINT('',#129400); +#129400 = CARTESIAN_POINT('',(107.946336,-135.12821,1.585)); +#129401 = LINE('',#129402,#129403); +#129402 = CARTESIAN_POINT('',(108.077073,-135.090853,1.585)); +#129403 = VECTOR('',#129404,1.); +#129404 = DIRECTION('',(-0.961517009042,-0.274745411833,0.)); +#129405 = ORIENTED_EDGE('',*,*,#129406,.T.); +#129406 = EDGE_CURVE('',#129399,#129407,#129409,.T.); +#129407 = VERTEX_POINT('',#129408); +#129408 = CARTESIAN_POINT('',(107.796908,-135.258954,1.585)); +#129409 = LINE('',#129410,#129411); +#129410 = CARTESIAN_POINT('',(107.946336,-135.12821,1.585)); +#129411 = VECTOR('',#129412,1.); +#129412 = DIRECTION('',(-0.752590422281,-0.658488918882,0.)); +#129413 = ORIENTED_EDGE('',*,*,#129414,.T.); +#129414 = EDGE_CURVE('',#129407,#129415,#129417,.T.); +#129415 = VERTEX_POINT('',#129416); +#129416 = CARTESIAN_POINT('',(107.722203,-135.389689,1.585)); +#129417 = LINE('',#129418,#129419); +#129418 = CARTESIAN_POINT('',(107.796908,-135.258954,1.585)); +#129419 = VECTOR('',#129420,1.); +#129420 = DIRECTION('',(-0.496135362289,-0.868245185582,0.)); +#129421 = ORIENTED_EDGE('',*,*,#129422,.T.); +#129422 = EDGE_CURVE('',#129415,#129423,#129425,.T.); +#129423 = VERTEX_POINT('',#129424); +#129424 = CARTESIAN_POINT('',(107.740881,-135.483078,1.585)); +#129425 = LINE('',#129426,#129427); +#129426 = CARTESIAN_POINT('',(107.722203,-135.389689,1.585)); +#129427 = VECTOR('',#129428,1.); +#129428 = DIRECTION('',(0.19611815436,-0.980580271844,0.)); +#129429 = ORIENTED_EDGE('',*,*,#129430,.T.); +#129430 = EDGE_CURVE('',#129423,#129431,#129433,.T.); +#129431 = VERTEX_POINT('',#129432); +#129432 = CARTESIAN_POINT('',(108.618703,-135.483078,1.585)); +#129433 = LINE('',#129434,#129435); +#129434 = CARTESIAN_POINT('',(107.740881,-135.483078,1.585)); +#129435 = VECTOR('',#129436,1.); +#129436 = DIRECTION('',(1.,0.,0.)); +#129437 = ORIENTED_EDGE('',*,*,#129438,.T.); +#129438 = EDGE_CURVE('',#129431,#129439,#129441,.T.); +#129439 = VERTEX_POINT('',#129440); +#129440 = CARTESIAN_POINT('',(108.637389,-135.464395,1.585)); +#129441 = LINE('',#129442,#129443); +#129442 = CARTESIAN_POINT('',(108.618703,-135.483078,1.585)); +#129443 = VECTOR('',#129444,1.); +#129444 = DIRECTION('',(0.707163545756,0.70705001206,0.)); +#129445 = ORIENTED_EDGE('',*,*,#129446,.T.); +#129446 = EDGE_CURVE('',#129439,#129447,#129449,.T.); +#129447 = VERTEX_POINT('',#129448); +#129448 = CARTESIAN_POINT('',(108.600035,-135.333658,1.585)); +#129449 = LINE('',#129450,#129451); +#129450 = CARTESIAN_POINT('',(108.637389,-135.464395,1.585)); +#129451 = VECTOR('',#129452,1.); +#129452 = DIRECTION('',(-0.274725013362,0.961522837499,0.)); +#129453 = ORIENTED_EDGE('',*,*,#129454,.T.); +#129454 = EDGE_CURVE('',#129447,#129455,#129457,.T.); +#129455 = VERTEX_POINT('',#129456); +#129456 = CARTESIAN_POINT('',(108.544,-135.258954,1.585)); +#129457 = LINE('',#129458,#129459); +#129458 = CARTESIAN_POINT('',(108.600035,-135.333658,1.585)); +#129459 = VECTOR('',#129460,1.); +#129460 = DIRECTION('',(-0.600047972775,0.799964018171,0.)); +#129461 = ORIENTED_EDGE('',*,*,#129462,.T.); +#129462 = EDGE_CURVE('',#129455,#129381,#129463,.T.); +#129463 = LINE('',#129464,#129465); +#129464 = CARTESIAN_POINT('',(108.544,-135.258954,1.585)); +#129465 = VECTOR('',#129466,1.); +#129466 = DIRECTION('',(-0.752564214242,0.658518870984,0.)); +#129467 = PLANE('',#129468); +#129468 = AXIS2_PLACEMENT_3D('',#129469,#129470,#129471); +#129469 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129470 = DIRECTION('',(0.,0.,1.)); +#129471 = DIRECTION('',(1.,0.,-0.)); +#129472 = SHELL_BASED_SURFACE_MODEL('',(#129473)); +#129473 = OPEN_SHELL('',(#129474)); +#129474 = ADVANCED_FACE('',(#129475),#129621,.T.); +#129475 = FACE_BOUND('',#129476,.F.); +#129476 = EDGE_LOOP('',(#129477,#129487,#129495,#129503,#129511,#129519, + #129527,#129535,#129543,#129551,#129559,#129567,#129575,#129583, + #129591,#129599,#129607,#129615)); +#129477 = ORIENTED_EDGE('',*,*,#129478,.T.); +#129478 = EDGE_CURVE('',#129479,#129481,#129483,.T.); +#129479 = VERTEX_POINT('',#129480); +#129480 = CARTESIAN_POINT('',(96.553274,-133.241827,1.585)); +#129481 = VERTEX_POINT('',#129482); +#129482 = CARTESIAN_POINT('',(96.571949,-133.223141,1.585)); +#129483 = LINE('',#129484,#129485); +#129484 = CARTESIAN_POINT('',(96.553274,-133.241827,1.585)); +#129485 = VECTOR('',#129486,1.); +#129486 = DIRECTION('',(0.706898560869,0.707314940208,0.)); +#129487 = ORIENTED_EDGE('',*,*,#129488,.T.); +#129488 = EDGE_CURVE('',#129481,#129489,#129491,.T.); +#129489 = VERTEX_POINT('',#129490); +#129490 = CARTESIAN_POINT('',(97.375065,-133.223141,1.585)); +#129491 = LINE('',#129492,#129493); +#129492 = CARTESIAN_POINT('',(96.571949,-133.223141,1.585)); +#129493 = VECTOR('',#129494,1.); +#129494 = DIRECTION('',(1.,0.,0.)); +#129495 = ORIENTED_EDGE('',*,*,#129496,.T.); +#129496 = EDGE_CURVE('',#129489,#129497,#129499,.T.); +#129497 = VERTEX_POINT('',#129498); +#129498 = CARTESIAN_POINT('',(97.375065,-134.69863,1.585)); +#129499 = LINE('',#129500,#129501); +#129500 = CARTESIAN_POINT('',(97.375065,-133.223141,1.585)); +#129501 = VECTOR('',#129502,1.); +#129502 = DIRECTION('',(0.,-1.,0.)); +#129503 = ORIENTED_EDGE('',*,*,#129504,.T.); +#129504 = EDGE_CURVE('',#129497,#129505,#129507,.T.); +#129505 = VERTEX_POINT('',#129506); +#129506 = CARTESIAN_POINT('',(97.393742,-134.717314,1.585)); +#129507 = LINE('',#129508,#129509); +#129508 = CARTESIAN_POINT('',(97.375065,-134.69863,1.585)); +#129509 = VECTOR('',#129510,1.); +#129510 = DIRECTION('',(0.706974284437,-0.707239253114,0.)); +#129511 = ORIENTED_EDGE('',*,*,#129512,.T.); +#129512 = EDGE_CURVE('',#129505,#129513,#129515,.T.); +#129513 = VERTEX_POINT('',#129514); +#129514 = CARTESIAN_POINT('',(98.607755,-134.717314,1.585)); +#129515 = LINE('',#129516,#129517); +#129516 = CARTESIAN_POINT('',(97.393742,-134.717314,1.585)); +#129517 = VECTOR('',#129518,1.); +#129518 = DIRECTION('',(1.,0.,0.)); +#129519 = ORIENTED_EDGE('',*,*,#129520,.T.); +#129520 = EDGE_CURVE('',#129513,#129521,#129523,.T.); +#129521 = VERTEX_POINT('',#129522); +#129522 = CARTESIAN_POINT('',(98.626433,-134.69863,1.585)); +#129523 = LINE('',#129524,#129525); +#129524 = CARTESIAN_POINT('',(98.607755,-134.717314,1.585)); +#129525 = VECTOR('',#129526,1.); +#129526 = DIRECTION('',(0.706993217103,0.707220327034,0.)); +#129527 = ORIENTED_EDGE('',*,*,#129528,.T.); +#129528 = EDGE_CURVE('',#129521,#129529,#129531,.T.); +#129529 = VERTEX_POINT('',#129530); +#129530 = CARTESIAN_POINT('',(98.626433,-133.223141,1.585)); +#129531 = LINE('',#129532,#129533); +#129532 = CARTESIAN_POINT('',(98.626433,-134.69863,1.585)); +#129533 = VECTOR('',#129534,1.); +#129534 = DIRECTION('',(0.,1.,0.)); +#129535 = ORIENTED_EDGE('',*,*,#129536,.T.); +#129536 = EDGE_CURVE('',#129529,#129537,#129539,.T.); +#129537 = VERTEX_POINT('',#129538); +#129538 = CARTESIAN_POINT('',(99.42955,-133.223141,1.585)); +#129539 = LINE('',#129540,#129541); +#129540 = CARTESIAN_POINT('',(98.626433,-133.223141,1.585)); +#129541 = VECTOR('',#129542,1.); +#129542 = DIRECTION('',(1.,0.,0.)); +#129543 = ORIENTED_EDGE('',*,*,#129544,.T.); +#129544 = EDGE_CURVE('',#129537,#129545,#129547,.T.); +#129545 = VERTEX_POINT('',#129546); +#129546 = CARTESIAN_POINT('',(99.448224,-133.241827,1.585)); +#129547 = LINE('',#129548,#129549); +#129548 = CARTESIAN_POINT('',(99.42955,-133.223141,1.585)); +#129549 = VECTOR('',#129550,1.); +#129550 = DIRECTION('',(0.70687962263,-0.707333866792,0.)); +#129551 = ORIENTED_EDGE('',*,*,#129552,.T.); +#129552 = EDGE_CURVE('',#129545,#129553,#129555,.T.); +#129553 = VERTEX_POINT('',#129554); +#129554 = CARTESIAN_POINT('',(99.448224,-136.958569,1.585)); +#129555 = LINE('',#129556,#129557); +#129556 = CARTESIAN_POINT('',(99.448224,-133.241827,1.585)); +#129557 = VECTOR('',#129558,1.); +#129558 = DIRECTION('',(0.,-1.,0.)); +#129559 = ORIENTED_EDGE('',*,*,#129560,.T.); +#129560 = EDGE_CURVE('',#129553,#129561,#129563,.T.); +#129561 = VERTEX_POINT('',#129562); +#129562 = CARTESIAN_POINT('',(98.626433,-136.958569,1.585)); +#129563 = LINE('',#129564,#129565); +#129564 = CARTESIAN_POINT('',(99.448224,-136.958569,1.585)); +#129565 = VECTOR('',#129566,1.); +#129566 = DIRECTION('',(-1.,0.,0.)); +#129567 = ORIENTED_EDGE('',*,*,#129568,.T.); +#129568 = EDGE_CURVE('',#129561,#129569,#129571,.T.); +#129569 = VERTEX_POINT('',#129570); +#129570 = CARTESIAN_POINT('',(98.626433,-135.483078,1.585)); +#129571 = LINE('',#129572,#129573); +#129572 = CARTESIAN_POINT('',(98.626433,-136.958569,1.585)); +#129573 = VECTOR('',#129574,1.); +#129574 = DIRECTION('',(0.,1.,0.)); +#129575 = ORIENTED_EDGE('',*,*,#129576,.T.); +#129576 = EDGE_CURVE('',#129569,#129577,#129579,.T.); +#129577 = VERTEX_POINT('',#129578); +#129578 = CARTESIAN_POINT('',(98.589075,-135.445712,1.585)); +#129579 = LINE('',#129580,#129581); +#129580 = CARTESIAN_POINT('',(98.626433,-135.483078,1.585)); +#129581 = VECTOR('',#129582,1.); +#129582 = DIRECTION('',(-0.707031073823,0.707182480445,0.)); +#129583 = ORIENTED_EDGE('',*,*,#129584,.T.); +#129584 = EDGE_CURVE('',#129577,#129585,#129587,.T.); +#129585 = VERTEX_POINT('',#129586); +#129586 = CARTESIAN_POINT('',(97.431097,-135.445712,1.585)); +#129587 = LINE('',#129588,#129589); +#129588 = CARTESIAN_POINT('',(98.589075,-135.445712,1.585)); +#129589 = VECTOR('',#129590,1.); +#129590 = DIRECTION('',(-1.,0.,0.)); +#129591 = ORIENTED_EDGE('',*,*,#129592,.T.); +#129592 = EDGE_CURVE('',#129585,#129593,#129595,.T.); +#129593 = VERTEX_POINT('',#129594); +#129594 = CARTESIAN_POINT('',(97.375065,-135.501753,1.585)); +#129595 = LINE('',#129596,#129597); +#129596 = CARTESIAN_POINT('',(97.431097,-135.445712,1.585)); +#129597 = VECTOR('',#129598,1.); +#129598 = DIRECTION('',(-0.707049994837,-0.707163562976,0.)); +#129599 = ORIENTED_EDGE('',*,*,#129600,.T.); +#129600 = EDGE_CURVE('',#129593,#129601,#129603,.T.); +#129601 = VERTEX_POINT('',#129602); +#129602 = CARTESIAN_POINT('',(97.375065,-136.958569,1.585)); +#129603 = LINE('',#129604,#129605); +#129604 = CARTESIAN_POINT('',(97.375065,-135.501753,1.585)); +#129605 = VECTOR('',#129606,1.); +#129606 = DIRECTION('',(0.,-1.,0.)); +#129607 = ORIENTED_EDGE('',*,*,#129608,.T.); +#129608 = EDGE_CURVE('',#129601,#129609,#129611,.T.); +#129609 = VERTEX_POINT('',#129610); +#129610 = CARTESIAN_POINT('',(96.553274,-136.958569,1.585)); +#129611 = LINE('',#129612,#129613); +#129612 = CARTESIAN_POINT('',(97.375065,-136.958569,1.585)); +#129613 = VECTOR('',#129614,1.); +#129614 = DIRECTION('',(-1.,0.,0.)); +#129615 = ORIENTED_EDGE('',*,*,#129616,.T.); +#129616 = EDGE_CURVE('',#129609,#129479,#129617,.T.); +#129617 = LINE('',#129618,#129619); +#129618 = CARTESIAN_POINT('',(96.553274,-136.958569,1.585)); +#129619 = VECTOR('',#129620,1.); +#129620 = DIRECTION('',(0.,1.,0.)); +#129621 = PLANE('',#129622); +#129622 = AXIS2_PLACEMENT_3D('',#129623,#129624,#129625); +#129623 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129624 = DIRECTION('',(0.,0.,1.)); +#129625 = DIRECTION('',(1.,0.,-0.)); +#129626 = SHELL_BASED_SURFACE_MODEL('',(#129627)); +#129627 = OPEN_SHELL('',(#129628)); +#129628 = ADVANCED_FACE('',(#129629),#129663,.T.); +#129629 = FACE_BOUND('',#129630,.F.); +#129630 = EDGE_LOOP('',(#129631,#129641,#129649,#129657)); +#129631 = ORIENTED_EDGE('',*,*,#129632,.T.); +#129632 = EDGE_CURVE('',#129633,#129635,#129637,.T.); +#129633 = VERTEX_POINT('',#129634); +#129634 = CARTESIAN_POINT('',(102.679372,-136.958569,1.585)); +#129635 = VERTEX_POINT('',#129636); +#129636 = CARTESIAN_POINT('',(102.679372,-133.073724,1.585)); +#129637 = LINE('',#129638,#129639); +#129638 = CARTESIAN_POINT('',(102.679372,-136.958569,1.585)); +#129639 = VECTOR('',#129640,1.); +#129640 = DIRECTION('',(0.,1.,0.)); +#129641 = ORIENTED_EDGE('',*,*,#129642,.T.); +#129642 = EDGE_CURVE('',#129635,#129643,#129645,.T.); +#129643 = VERTEX_POINT('',#129644); +#129644 = CARTESIAN_POINT('',(103.463815,-133.073724,1.585)); +#129645 = LINE('',#129646,#129647); +#129646 = CARTESIAN_POINT('',(102.679372,-133.073724,1.585)); +#129647 = VECTOR('',#129648,1.); +#129648 = DIRECTION('',(1.,0.,0.)); +#129649 = ORIENTED_EDGE('',*,*,#129650,.T.); +#129650 = EDGE_CURVE('',#129643,#129651,#129653,.T.); +#129651 = VERTEX_POINT('',#129652); +#129652 = CARTESIAN_POINT('',(103.463815,-136.958569,1.585)); +#129653 = LINE('',#129654,#129655); +#129654 = CARTESIAN_POINT('',(103.463815,-133.073724,1.585)); +#129655 = VECTOR('',#129656,1.); +#129656 = DIRECTION('',(0.,-1.,0.)); +#129657 = ORIENTED_EDGE('',*,*,#129658,.T.); +#129658 = EDGE_CURVE('',#129651,#129633,#129659,.T.); +#129659 = LINE('',#129660,#129661); +#129660 = CARTESIAN_POINT('',(103.463815,-136.958569,1.585)); +#129661 = VECTOR('',#129662,1.); +#129662 = DIRECTION('',(-1.,0.,0.)); +#129663 = PLANE('',#129664); +#129664 = AXIS2_PLACEMENT_3D('',#129665,#129666,#129667); +#129665 = CARTESIAN_POINT('',(0.,0.,1.585)); +#129666 = DIRECTION('',(0.,0.,1.)); +#129667 = DIRECTION('',(1.,0.,-0.)); +#129668 = SHELL_BASED_SURFACE_MODEL('',(#129669)); +#129669 = OPEN_SHELL('',(#129670)); +#129670 = ADVANCED_FACE('',(#129671),#130002,.T.); +#129671 = FACE_BOUND('',#129672,.F.); +#129672 = EDGE_LOOP('',(#129673,#129683,#129691,#129699,#129707,#129715, + #129723,#129731,#129739,#129747,#129755,#129764,#129772,#129780, + #129788,#129796,#129804,#129812,#129820,#129828,#129836,#129844, + #129852,#129860,#129868,#129876,#129884,#129892,#129900,#129908, + #129916,#129924,#129932,#129940,#129948,#129956,#129964,#129972, + #129980,#129988,#129996)); +#129673 = ORIENTED_EDGE('',*,*,#129674,.T.); +#129674 = EDGE_CURVE('',#129675,#129677,#129679,.T.); +#129675 = VERTEX_POINT('',#129676); +#129676 = CARTESIAN_POINT('',(110.953352,-134.623926,1.585)); +#129677 = VERTEX_POINT('',#129678); +#129678 = CARTESIAN_POINT('',(111.102772,-134.58657,1.585)); +#129679 = LINE('',#129680,#129681); +#129680 = CARTESIAN_POINT('',(110.953352,-134.623926,1.585)); +#129681 = VECTOR('',#129682,1.); +#129682 = DIRECTION('',(0.970140972429,0.242541735819,0.)); +#129683 = ORIENTED_EDGE('',*,*,#129684,.T.); +#129684 = EDGE_CURVE('',#129677,#129685,#129687,.T.); +#129685 = VERTEX_POINT('',#129686); +#129686 = CARTESIAN_POINT('',(111.382926,-134.58657,1.585)); +#129687 = LINE('',#129688,#129689); +#129688 = CARTESIAN_POINT('',(111.102772,-134.58657,1.585)); +#129689 = VECTOR('',#129690,1.); +#129690 = DIRECTION('',(1.,0.,0.)); +#129691 = ORIENTED_EDGE('',*,*,#129692,.T.); +#129692 = EDGE_CURVE('',#129685,#129693,#129695,.T.); +#129693 = VERTEX_POINT('',#129694); +#129694 = CARTESIAN_POINT('',(111.737789,-134.679957,1.585)); +#129695 = LINE('',#129696,#129697); +#129696 = CARTESIAN_POINT('',(111.382926,-134.58657,1.585)); +#129697 = VECTOR('',#129698,1.); +#129698 = DIRECTION('',(0.967073195829,-0.254498396674,0.)); +#129699 = ORIENTED_EDGE('',*,*,#129700,.T.); +#129700 = EDGE_CURVE('',#129693,#129701,#129703,.T.); +#129701 = VERTEX_POINT('',#129702); +#129702 = CARTESIAN_POINT('',(111.961913,-134.810694,1.585)); +#129703 = LINE('',#129704,#129705); +#129704 = CARTESIAN_POINT('',(111.737789,-134.679957,1.585)); +#129705 = VECTOR('',#129706,1.); +#129706 = DIRECTION('',(0.863782255689,-0.503865274411,0.)); +#129707 = ORIENTED_EDGE('',*,*,#129708,.T.); +#129708 = EDGE_CURVE('',#129701,#129709,#129711,.T.); +#129709 = VERTEX_POINT('',#129710); +#129710 = CARTESIAN_POINT('',(112.073984,-134.922758,1.585)); +#129711 = LINE('',#129712,#129713); +#129712 = CARTESIAN_POINT('',(111.961913,-134.810694,1.585)); +#129713 = VECTOR('',#129714,1.); +#129714 = DIRECTION('',(0.707128864619,-0.707084697064,0.)); +#129715 = ORIENTED_EDGE('',*,*,#129716,.T.); +#129716 = EDGE_CURVE('',#129709,#129717,#129719,.T.); +#129717 = VERTEX_POINT('',#129718); +#129718 = CARTESIAN_POINT('',(112.204726,-135.165561,1.585)); +#129719 = LINE('',#129720,#129721); +#129720 = CARTESIAN_POINT('',(112.073984,-134.922758,1.585)); +#129721 = VECTOR('',#129722,1.); +#129722 = DIRECTION('',(0.474105229156,-0.880468188912,0.)); +#129723 = ORIENTED_EDGE('',*,*,#129724,.T.); +#129724 = EDGE_CURVE('',#129717,#129725,#129727,.T.); +#129725 = VERTEX_POINT('',#129726); +#129726 = CARTESIAN_POINT('',(112.242075,-135.352337,1.585)); +#129727 = LINE('',#129728,#129729); +#129728 = CARTESIAN_POINT('',(112.204726,-135.165561,1.585)); +#129729 = VECTOR('',#129730,1.); +#129730 = DIRECTION('',(0.196084836549,-0.980586934889,0.)); +#129731 = ORIENTED_EDGE('',*,*,#129732,.T.); +#129732 = EDGE_CURVE('',#129725,#129733,#129735,.T.); +#129733 = VERTEX_POINT('',#129734); +#129734 = CARTESIAN_POINT('',(112.242075,-136.958569,1.585)); +#129735 = LINE('',#129736,#129737); +#129736 = CARTESIAN_POINT('',(112.242075,-135.352337,1.585)); +#129737 = VECTOR('',#129738,1.); +#129738 = DIRECTION('',(0.,-1.,0.)); +#129739 = ORIENTED_EDGE('',*,*,#129740,.T.); +#129740 = EDGE_CURVE('',#129733,#129741,#129743,.T.); +#129741 = VERTEX_POINT('',#129742); +#129742 = CARTESIAN_POINT('',(111.457629,-136.958569,1.585)); +#129743 = LINE('',#129744,#129745); +#129744 = CARTESIAN_POINT('',(112.242075,-136.958569,1.585)); +#129745 = VECTOR('',#129746,1.); +#129746 = DIRECTION('',(-1.,0.,0.)); +#129747 = ORIENTED_EDGE('',*,*,#129748,.T.); +#129748 = EDGE_CURVE('',#129741,#129749,#129751,.T.); +#129749 = VERTEX_POINT('',#129750); +#129750 = CARTESIAN_POINT('',(111.457629,-135.576461,1.585)); +#129751 = LINE('',#129752,#129753); +#129752 = CARTESIAN_POINT('',(111.457629,-136.958569,1.585)); +#129753 = VECTOR('',#129754,1.); +#129754 = DIRECTION('',(0.,1.,0.)); +#129755 = ORIENTED_EDGE('',*,*,#129756,.T.); +#129756 = EDGE_CURVE('',#129749,#129757,#129759,.T.); +#129757 = VERTEX_POINT('',#129758); +#129758 = CARTESIAN_POINT('',(111.140129,-135.202919,1.585)); +#129759 = CIRCLE('',#129760,0.481096004265); +#129760 = AXIS2_PLACEMENT_3D('',#129761,#129762,#129763); +#129761 = CARTESIAN_POINT('',(110.98345706625,-135.6577896085,1.585)); +#129762 = DIRECTION('',(0.,0.,1.)); +#129763 = DIRECTION('',(0.985607715604,0.169048605265,-0.)); +#129764 = ORIENTED_EDGE('',*,*,#129765,.T.); +#129765 = EDGE_CURVE('',#129757,#129766,#129768,.T.); +#129766 = VERTEX_POINT('',#129767); +#129767 = CARTESIAN_POINT('',(111.046732,-135.202919,1.585)); +#129768 = LINE('',#129769,#129770); +#129769 = CARTESIAN_POINT('',(111.140129,-135.202919,1.585)); +#129770 = VECTOR('',#129771,1.); +#129771 = DIRECTION('',(-1.,0.,0.)); +#129772 = ORIENTED_EDGE('',*,*,#129773,.T.); +#129773 = EDGE_CURVE('',#129766,#129774,#129776,.T.); +#129774 = VERTEX_POINT('',#129775); +#129775 = CARTESIAN_POINT('',(111.028064,-135.184242,1.585)); +#129776 = LINE('',#129777,#129778); +#129777 = CARTESIAN_POINT('',(111.046732,-135.202919,1.585)); +#129778 = VECTOR('',#129779,1.); +#129779 = DIRECTION('',(-0.706936350669,0.707277170636,0.)); +#129780 = ORIENTED_EDGE('',*,*,#129781,.T.); +#129781 = EDGE_CURVE('',#129774,#129782,#129784,.T.); +#129782 = VERTEX_POINT('',#129783); +#129783 = CARTESIAN_POINT('',(110.841287,-135.221594,1.585)); +#129784 = LINE('',#129785,#129786); +#129785 = CARTESIAN_POINT('',(111.028064,-135.184242,1.585)); +#129786 = VECTOR('',#129787,1.); +#129787 = DIRECTION('',(-0.98058410825,-0.196098971562,0.)); +#129788 = ORIENTED_EDGE('',*,*,#129789,.T.); +#129789 = EDGE_CURVE('',#129782,#129790,#129792,.T.); +#129790 = VERTEX_POINT('',#129791); +#129791 = CARTESIAN_POINT('',(110.729229,-135.296307,1.585)); +#129792 = LINE('',#129793,#129794); +#129793 = CARTESIAN_POINT('',(110.841287,-135.221594,1.585)); +#129794 = VECTOR('',#129795,1.); +#129795 = DIRECTION('',(-0.832024020537,-0.554739604904,0.)); +#129796 = ORIENTED_EDGE('',*,*,#129797,.T.); +#129797 = EDGE_CURVE('',#129790,#129798,#129800,.T.); +#129798 = VERTEX_POINT('',#129799); +#129799 = CARTESIAN_POINT('',(110.579811,-135.464395,1.585)); +#129800 = LINE('',#129801,#129802); +#129801 = CARTESIAN_POINT('',(110.729229,-135.296307,1.585)); +#129802 = VECTOR('',#129803,1.); +#129803 = DIRECTION('',(-0.664379845902,-0.747395089868,0.)); +#129804 = ORIENTED_EDGE('',*,*,#129805,.T.); +#129805 = EDGE_CURVE('',#129798,#129806,#129808,.T.); +#129806 = VERTEX_POINT('',#129807); +#129807 = CARTESIAN_POINT('',(110.542454,-135.576461,1.585)); +#129808 = LINE('',#129809,#129810); +#129809 = CARTESIAN_POINT('',(110.579811,-135.464395,1.585)); +#129810 = VECTOR('',#129811,1.); +#129811 = DIRECTION('',(-0.316240464029,-0.948679065285,0.)); +#129812 = ORIENTED_EDGE('',*,*,#129813,.T.); +#129813 = EDGE_CURVE('',#129806,#129814,#129816,.T.); +#129814 = VERTEX_POINT('',#129815); +#129815 = CARTESIAN_POINT('',(110.542454,-136.958569,1.585)); +#129816 = LINE('',#129817,#129818); +#129817 = CARTESIAN_POINT('',(110.542454,-135.576461,1.585)); +#129818 = VECTOR('',#129819,1.); +#129819 = DIRECTION('',(0.,-1.,0.)); +#129820 = ORIENTED_EDGE('',*,*,#129821,.T.); +#129821 = EDGE_CURVE('',#129814,#129822,#129824,.T.); +#129822 = VERTEX_POINT('',#129823); +#129823 = CARTESIAN_POINT('',(109.758015,-136.958569,1.585)); +#129824 = LINE('',#129825,#129826); +#129825 = CARTESIAN_POINT('',(110.542454,-136.958569,1.585)); +#129826 = VECTOR('',#129827,1.); +#129827 = DIRECTION('',(-1.,0.,0.)); +#129828 = ORIENTED_EDGE('',*,*,#129829,.T.); +#129829 = EDGE_CURVE('',#129822,#129830,#129832,.T.); +#129830 = VERTEX_POINT('',#129831); +#129831 = CARTESIAN_POINT('',(109.739336,-136.939891,1.585)); +#129832 = LINE('',#129833,#129834); +#129833 = CARTESIAN_POINT('',(109.758015,-136.958569,1.585)); +#129834 = VECTOR('',#129835,1.); +#129835 = DIRECTION('',(-0.707125709294,0.707087852573,0.)); +#129836 = ORIENTED_EDGE('',*,*,#129837,.T.); +#129837 = EDGE_CURVE('',#129830,#129838,#129840,.T.); +#129838 = VERTEX_POINT('',#129839); +#129839 = CARTESIAN_POINT('',(109.739336,-135.744559,1.585)); +#129840 = LINE('',#129841,#129842); +#129841 = CARTESIAN_POINT('',(109.739336,-136.939891,1.585)); +#129842 = VECTOR('',#129843,1.); +#129843 = DIRECTION('',(0.,1.,0.)); +#129844 = ORIENTED_EDGE('',*,*,#129845,.T.); +#129845 = EDGE_CURVE('',#129838,#129846,#129848,.T.); +#129846 = VERTEX_POINT('',#129847); +#129847 = CARTESIAN_POINT('',(109.758015,-135.651172,1.585)); +#129848 = LINE('',#129849,#129850); +#129849 = CARTESIAN_POINT('',(109.739336,-135.744559,1.585)); +#129850 = VECTOR('',#129851,1.); +#129851 = DIRECTION('',(0.196132289187,0.980577444743,0.)); +#129852 = ORIENTED_EDGE('',*,*,#129853,.T.); +#129853 = EDGE_CURVE('',#129846,#129854,#129856,.T.); +#129854 = VERTEX_POINT('',#129855); +#129855 = CARTESIAN_POINT('',(109.739336,-135.557784,1.585)); +#129856 = LINE('',#129857,#129858); +#129857 = CARTESIAN_POINT('',(109.758015,-135.651172,1.585)); +#129858 = VECTOR('',#129859,1.); +#129859 = DIRECTION('',(-0.196130269789,0.980577848655,0.)); +#129860 = ORIENTED_EDGE('',*,*,#129861,.T.); +#129861 = EDGE_CURVE('',#129854,#129862,#129864,.T.); +#129862 = VERTEX_POINT('',#129863); +#129863 = CARTESIAN_POINT('',(109.758015,-135.483078,1.585)); +#129864 = LINE('',#129865,#129866); +#129865 = CARTESIAN_POINT('',(109.739336,-135.557784,1.585)); +#129866 = VECTOR('',#129867,1.); +#129867 = DIRECTION('',(0.242566180297,0.970134860819,0.)); +#129868 = ORIENTED_EDGE('',*,*,#129869,.T.); +#129869 = EDGE_CURVE('',#129862,#129870,#129872,.T.); +#129870 = VERTEX_POINT('',#129871); +#129871 = CARTESIAN_POINT('',(109.739336,-135.427047,1.585)); +#129872 = LINE('',#129873,#129874); +#129873 = CARTESIAN_POINT('',(109.758015,-135.483078,1.585)); +#129874 = VECTOR('',#129875,1.); +#129875 = DIRECTION('',(-0.316258242048,0.94867313883,0.)); +#129876 = ORIENTED_EDGE('',*,*,#129877,.T.); +#129877 = EDGE_CURVE('',#129870,#129878,#129880,.T.); +#129878 = VERTEX_POINT('',#129879); +#129879 = CARTESIAN_POINT('',(109.758015,-135.408364,1.585)); +#129880 = LINE('',#129881,#129882); +#129881 = CARTESIAN_POINT('',(109.739336,-135.427047,1.585)); +#129882 = VECTOR('',#129883,1.); +#129883 = DIRECTION('',(0.707031073824,0.707182480445,0.)); +#129884 = ORIENTED_EDGE('',*,*,#129885,.T.); +#129885 = EDGE_CURVE('',#129878,#129886,#129888,.T.); +#129886 = VERTEX_POINT('',#129887); +#129887 = CARTESIAN_POINT('',(109.758015,-135.296307,1.585)); +#129888 = LINE('',#129889,#129890); +#129889 = CARTESIAN_POINT('',(109.758015,-135.408364,1.585)); +#129890 = VECTOR('',#129891,1.); +#129891 = DIRECTION('',(0.,1.,0.)); +#129892 = ORIENTED_EDGE('',*,*,#129893,.T.); +#129893 = EDGE_CURVE('',#129886,#129894,#129896,.T.); +#129894 = VERTEX_POINT('',#129895); +#129895 = CARTESIAN_POINT('',(109.739336,-135.277626,1.585)); +#129896 = LINE('',#129897,#129898); +#129897 = CARTESIAN_POINT('',(109.758015,-135.296307,1.585)); +#129898 = VECTOR('',#129899,1.); +#129899 = DIRECTION('',(-0.707068926491,0.707144633856,0.)); +#129900 = ORIENTED_EDGE('',*,*,#129901,.T.); +#129901 = EDGE_CURVE('',#129894,#129902,#129904,.T.); +#129902 = VERTEX_POINT('',#129903); +#129903 = CARTESIAN_POINT('',(109.739336,-135.146882,1.585)); +#129904 = LINE('',#129905,#129906); +#129905 = CARTESIAN_POINT('',(109.739336,-135.277626,1.585)); +#129906 = VECTOR('',#129907,1.); +#129907 = DIRECTION('',(0.,1.,0.)); +#129908 = ORIENTED_EDGE('',*,*,#129909,.T.); +#129909 = EDGE_CURVE('',#129902,#129910,#129912,.T.); +#129910 = VERTEX_POINT('',#129911); +#129911 = CARTESIAN_POINT('',(109.758015,-135.12821,1.585)); +#129912 = LINE('',#129913,#129914); +#129913 = CARTESIAN_POINT('',(109.739336,-135.146882,1.585)); +#129914 = VECTOR('',#129915,1.); +#129915 = DIRECTION('',(0.707239288578,0.70697424896,0.)); +#129916 = ORIENTED_EDGE('',*,*,#129917,.T.); +#129917 = EDGE_CURVE('',#129910,#129918,#129920,.T.); +#129918 = VERTEX_POINT('',#129919); +#129919 = CARTESIAN_POINT('',(109.739336,-134.960124,1.585)); +#129920 = LINE('',#129921,#129922); +#129921 = CARTESIAN_POINT('',(109.758015,-135.12821,1.585)); +#129922 = VECTOR('',#129923,1.); +#129923 = DIRECTION('',(-0.110447750582,0.993881931816,0.)); +#129924 = ORIENTED_EDGE('',*,*,#129925,.T.); +#129925 = EDGE_CURVE('',#129918,#129926,#129928,.T.); +#129926 = VERTEX_POINT('',#129927); +#129927 = CARTESIAN_POINT('',(109.758015,-134.866728,1.585)); +#129928 = LINE('',#129929,#129930); +#129929 = CARTESIAN_POINT('',(109.739336,-134.960124,1.585)); +#129930 = VECTOR('',#129931,1.); +#129931 = DIRECTION('',(0.196114116065,0.980581079503,0.)); +#129932 = ORIENTED_EDGE('',*,*,#129933,.T.); +#129933 = EDGE_CURVE('',#129926,#129934,#129936,.T.); +#129934 = VERTEX_POINT('',#129935); +#129935 = CARTESIAN_POINT('',(109.739336,-134.848052,1.585)); +#129936 = LINE('',#129937,#129938); +#129937 = CARTESIAN_POINT('',(109.758015,-134.866728,1.585)); +#129938 = VECTOR('',#129939,1.); +#129939 = DIRECTION('',(-0.707163567029,0.707049990783,0.)); +#129940 = ORIENTED_EDGE('',*,*,#129941,.T.); +#129941 = EDGE_CURVE('',#129934,#129942,#129944,.T.); +#129942 = VERTEX_POINT('',#129943); +#129943 = CARTESIAN_POINT('',(109.739336,-134.69863,1.585)); +#129944 = LINE('',#129945,#129946); +#129945 = CARTESIAN_POINT('',(109.739336,-134.848052,1.585)); +#129946 = VECTOR('',#129947,1.); +#129947 = DIRECTION('',(0.,1.,0.)); +#129948 = ORIENTED_EDGE('',*,*,#129949,.T.); +#129949 = EDGE_CURVE('',#129942,#129950,#129952,.T.); +#129950 = VERTEX_POINT('',#129951); +#129951 = CARTESIAN_POINT('',(109.758015,-134.642604,1.585)); +#129952 = LINE('',#129953,#129954); +#129953 = CARTESIAN_POINT('',(109.739336,-134.69863,1.585)); +#129954 = VECTOR('',#129955,1.); +#129955 = DIRECTION('',(0.316283642979,0.948664670568,0.)); +#129956 = ORIENTED_EDGE('',*,*,#129957,.T.); +#129957 = EDGE_CURVE('',#129950,#129958,#129960,.T.); +#129958 = VERTEX_POINT('',#129959); +#129959 = CARTESIAN_POINT('',(110.505098,-134.642604,1.585)); +#129960 = LINE('',#129961,#129962); +#129961 = CARTESIAN_POINT('',(109.758015,-134.642604,1.585)); +#129962 = VECTOR('',#129963,1.); +#129963 = DIRECTION('',(1.,0.,0.)); +#129964 = ORIENTED_EDGE('',*,*,#129965,.T.); +#129965 = EDGE_CURVE('',#129958,#129966,#129968,.T.); +#129966 = VERTEX_POINT('',#129967); +#129967 = CARTESIAN_POINT('',(110.542454,-134.679957,1.585)); +#129968 = LINE('',#129969,#129970); +#129969 = CARTESIAN_POINT('',(110.505098,-134.642604,1.585)); +#129970 = VECTOR('',#129971,1.); +#129971 = DIRECTION('',(0.707135175058,-0.707078386175,0.)); +#129972 = ORIENTED_EDGE('',*,*,#129973,.T.); +#129973 = EDGE_CURVE('',#129966,#129974,#129976,.T.); +#129974 = VERTEX_POINT('',#129975); +#129975 = CARTESIAN_POINT('',(110.542454,-134.885406,1.585)); +#129976 = LINE('',#129977,#129978); +#129977 = CARTESIAN_POINT('',(110.542454,-134.679957,1.585)); +#129978 = VECTOR('',#129979,1.); +#129979 = DIRECTION('',(0.,-1.,0.)); +#129980 = ORIENTED_EDGE('',*,*,#129981,.T.); +#129981 = EDGE_CURVE('',#129974,#129982,#129984,.T.); +#129982 = VERTEX_POINT('',#129983); +#129983 = CARTESIAN_POINT('',(110.561127,-134.904083,1.585)); +#129984 = LINE('',#129985,#129986); +#129985 = CARTESIAN_POINT('',(110.542454,-134.885406,1.585)); +#129986 = VECTOR('',#129987,1.); +#129987 = DIRECTION('',(0.707031049497,-0.707182504766,0.)); +#129988 = ORIENTED_EDGE('',*,*,#129989,.T.); +#129989 = EDGE_CURVE('',#129982,#129990,#129992,.T.); +#129990 = VERTEX_POINT('',#129991); +#129991 = CARTESIAN_POINT('',(110.766581,-134.717314,1.585)); +#129992 = LINE('',#129993,#129994); +#129993 = CARTESIAN_POINT('',(110.561127,-134.904083,1.585)); +#129994 = VECTOR('',#129995,1.); +#129995 = DIRECTION('',(0.739953273512,0.672658273582,0.)); +#129996 = ORIENTED_EDGE('',*,*,#129997,.T.); +#129997 = EDGE_CURVE('',#129990,#129675,#129998,.T.); +#129998 = LINE('',#129999,#130000); +#129999 = CARTESIAN_POINT('',(110.766581,-134.717314,1.585)); +#130000 = VECTOR('',#130001,1.); +#130001 = DIRECTION('',(0.894422402077,0.447223173218,0.)); +#130002 = PLANE('',#130003); +#130003 = AXIS2_PLACEMENT_3D('',#130004,#130005,#130006); +#130004 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130005 = DIRECTION('',(0.,0.,1.)); +#130006 = DIRECTION('',(1.,0.,-0.)); +#130007 = SHELL_BASED_SURFACE_MODEL('',(#130008)); +#130008 = OPEN_SHELL('',(#130009)); +#130009 = ADVANCED_FACE('',(#130010),#130054,.T.); +#130010 = FACE_BOUND('',#130011,.F.); +#130011 = EDGE_LOOP('',(#130012,#130023,#130031,#130040,#130048)); +#130012 = ORIENTED_EDGE('',*,*,#130013,.T.); +#130013 = EDGE_CURVE('',#130014,#130016,#130018,.T.); +#130014 = VERTEX_POINT('',#130015); +#130015 = CARTESIAN_POINT('',(198.886217,-134.800139,1.585)); +#130016 = VERTEX_POINT('',#130017); +#130017 = CARTESIAN_POINT('',(199.00165,-134.8231,1.585)); +#130018 = CIRCLE('',#130019,6.000007318649E-02); +#130019 = AXIS2_PLACEMENT_3D('',#130020,#130021,#130022); +#130020 = CARTESIAN_POINT('',(198.94164992681,-134.8230998233,1.585)); +#130021 = DIRECTION('',(0.,0.,-1.)); +#130022 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#130023 = ORIENTED_EDGE('',*,*,#130024,.T.); +#130024 = EDGE_CURVE('',#130016,#130025,#130027,.T.); +#130025 = VERTEX_POINT('',#130026); +#130026 = CARTESIAN_POINT('',(199.00165,-136.3231,1.585)); +#130027 = LINE('',#130028,#130029); +#130028 = CARTESIAN_POINT('',(199.00165,-134.8231,1.585)); +#130029 = VECTOR('',#130030,1.); +#130030 = DIRECTION('',(0.,-1.,0.)); +#130031 = ORIENTED_EDGE('',*,*,#130032,.T.); +#130032 = EDGE_CURVE('',#130025,#130033,#130035,.T.); +#130033 = VERTEX_POINT('',#130034); +#130034 = CARTESIAN_POINT('',(198.88165,-136.3231,1.585)); +#130035 = CIRCLE('',#130036,6.000000000042E-02); +#130036 = AXIS2_PLACEMENT_3D('',#130037,#130038,#130039); +#130037 = CARTESIAN_POINT('',(198.94165,-136.3231002255,1.585)); +#130038 = DIRECTION('',(0.,0.,-1.)); +#130039 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#130040 = ORIENTED_EDGE('',*,*,#130041,.T.); +#130041 = EDGE_CURVE('',#130033,#130042,#130044,.T.); +#130042 = VERTEX_POINT('',#130043); +#130043 = CARTESIAN_POINT('',(198.88165,-134.8231,1.585)); +#130044 = LINE('',#130045,#130046); +#130045 = CARTESIAN_POINT('',(198.88165,-136.3231,1.585)); +#130046 = VECTOR('',#130047,1.); +#130047 = DIRECTION('',(0.,1.,0.)); +#130048 = ORIENTED_EDGE('',*,*,#130049,.T.); +#130049 = EDGE_CURVE('',#130042,#130014,#130050,.T.); +#130050 = LINE('',#130051,#130052); +#130051 = CARTESIAN_POINT('',(198.88165,-134.8231,1.585)); +#130052 = VECTOR('',#130053,1.); +#130053 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#130054 = PLANE('',#130055); +#130055 = AXIS2_PLACEMENT_3D('',#130056,#130057,#130058); +#130056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130057 = DIRECTION('',(0.,0.,1.)); +#130058 = DIRECTION('',(1.,0.,-0.)); +#130059 = SHELL_BASED_SURFACE_MODEL('',(#130060)); +#130060 = OPEN_SHELL('',(#130061)); +#130061 = ADVANCED_FACE('',(#130062),#130106,.T.); +#130062 = FACE_BOUND('',#130063,.F.); +#130063 = EDGE_LOOP('',(#130064,#130075,#130083,#130092,#130100)); +#130064 = ORIENTED_EDGE('',*,*,#130065,.T.); +#130065 = EDGE_CURVE('',#130066,#130068,#130070,.T.); +#130066 = VERTEX_POINT('',#130067); +#130067 = CARTESIAN_POINT('',(205.886217,-134.800139,1.585)); +#130068 = VERTEX_POINT('',#130069); +#130069 = CARTESIAN_POINT('',(206.00165,-134.8231,1.585)); +#130070 = CIRCLE('',#130071,6.000007318649E-02); +#130071 = AXIS2_PLACEMENT_3D('',#130072,#130073,#130074); +#130072 = CARTESIAN_POINT('',(205.94164992681,-134.8230998233,1.585)); +#130073 = DIRECTION('',(0.,0.,-1.)); +#130074 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#130075 = ORIENTED_EDGE('',*,*,#130076,.T.); +#130076 = EDGE_CURVE('',#130068,#130077,#130079,.T.); +#130077 = VERTEX_POINT('',#130078); +#130078 = CARTESIAN_POINT('',(206.00165,-136.3231,1.585)); +#130079 = LINE('',#130080,#130081); +#130080 = CARTESIAN_POINT('',(206.00165,-134.8231,1.585)); +#130081 = VECTOR('',#130082,1.); +#130082 = DIRECTION('',(0.,-1.,0.)); +#130083 = ORIENTED_EDGE('',*,*,#130084,.T.); +#130084 = EDGE_CURVE('',#130077,#130085,#130087,.T.); +#130085 = VERTEX_POINT('',#130086); +#130086 = CARTESIAN_POINT('',(205.88165,-136.3231,1.585)); +#130087 = CIRCLE('',#130088,6.000000000042E-02); +#130088 = AXIS2_PLACEMENT_3D('',#130089,#130090,#130091); +#130089 = CARTESIAN_POINT('',(205.94165,-136.3231002255,1.585)); +#130090 = DIRECTION('',(0.,0.,-1.)); +#130091 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#130092 = ORIENTED_EDGE('',*,*,#130093,.T.); +#130093 = EDGE_CURVE('',#130085,#130094,#130096,.T.); +#130094 = VERTEX_POINT('',#130095); +#130095 = CARTESIAN_POINT('',(205.88165,-134.8231,1.585)); +#130096 = LINE('',#130097,#130098); +#130097 = CARTESIAN_POINT('',(205.88165,-136.3231,1.585)); +#130098 = VECTOR('',#130099,1.); +#130099 = DIRECTION('',(0.,1.,0.)); +#130100 = ORIENTED_EDGE('',*,*,#130101,.T.); +#130101 = EDGE_CURVE('',#130094,#130066,#130102,.T.); +#130102 = LINE('',#130103,#130104); +#130103 = CARTESIAN_POINT('',(205.88165,-134.8231,1.585)); +#130104 = VECTOR('',#130105,1.); +#130105 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#130106 = PLANE('',#130107); +#130107 = AXIS2_PLACEMENT_3D('',#130108,#130109,#130110); +#130108 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130109 = DIRECTION('',(0.,0.,1.)); +#130110 = DIRECTION('',(1.,0.,-0.)); +#130111 = SHELL_BASED_SURFACE_MODEL('',(#130112)); +#130112 = OPEN_SHELL('',(#130113)); +#130113 = ADVANCED_FACE('',(#130114),#130200,.T.); +#130114 = FACE_BOUND('',#130115,.F.); +#130115 = EDGE_LOOP('',(#130116,#130127,#130135,#130144,#130152,#130161, + #130169,#130177,#130185,#130194)); +#130116 = ORIENTED_EDGE('',*,*,#130117,.T.); +#130117 = EDGE_CURVE('',#130118,#130120,#130122,.T.); +#130118 = VERTEX_POINT('',#130119); +#130119 = CARTESIAN_POINT('',(144.915,-133.6,1.585)); +#130120 = VERTEX_POINT('',#130121); +#130121 = CARTESIAN_POINT('',(144.975,-133.54,1.585)); +#130122 = CIRCLE('',#130123,5.999932016268E-02); +#130123 = AXIS2_PLACEMENT_3D('',#130124,#130125,#130126); +#130124 = CARTESIAN_POINT('',(144.97499932015,-133.5999993201,1.585)); +#130125 = DIRECTION('',(0.,0.,-1.)); +#130126 = DIRECTION('',(-0.999999999936,-1.133081470031E-05,-0.)); +#130127 = ORIENTED_EDGE('',*,*,#130128,.T.); +#130128 = EDGE_CURVE('',#130120,#130129,#130131,.T.); +#130129 = VERTEX_POINT('',#130130); +#130130 = CARTESIAN_POINT('',(151.375,-133.54,1.585)); +#130131 = LINE('',#130132,#130133); +#130132 = CARTESIAN_POINT('',(144.975,-133.54,1.585)); +#130133 = VECTOR('',#130134,1.); +#130134 = DIRECTION('',(1.,0.,0.)); +#130135 = ORIENTED_EDGE('',*,*,#130136,.T.); +#130136 = EDGE_CURVE('',#130129,#130137,#130139,.T.); +#130137 = VERTEX_POINT('',#130138); +#130138 = CARTESIAN_POINT('',(151.435,-133.6,1.585)); +#130139 = CIRCLE('',#130140,5.999932016262E-02); +#130140 = AXIS2_PLACEMENT_3D('',#130141,#130142,#130143); +#130141 = CARTESIAN_POINT('',(151.37500067984,-133.5999993201,1.585)); +#130142 = DIRECTION('',(0.,0.,-1.)); +#130143 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#130144 = ORIENTED_EDGE('',*,*,#130145,.T.); +#130145 = EDGE_CURVE('',#130137,#130146,#130148,.T.); +#130146 = VERTEX_POINT('',#130147); +#130147 = CARTESIAN_POINT('',(151.435,-134.8,1.585)); +#130148 = LINE('',#130149,#130150); +#130149 = CARTESIAN_POINT('',(151.435,-133.6,1.585)); +#130150 = VECTOR('',#130151,1.); +#130151 = DIRECTION('',(0.,-1.,0.)); +#130152 = ORIENTED_EDGE('',*,*,#130153,.T.); +#130153 = EDGE_CURVE('',#130146,#130154,#130156,.T.); +#130154 = VERTEX_POINT('',#130155); +#130155 = CARTESIAN_POINT('',(151.315,-134.8,1.585)); +#130156 = CIRCLE('',#130157,6.000000000042E-02); +#130157 = AXIS2_PLACEMENT_3D('',#130158,#130159,#130160); +#130158 = CARTESIAN_POINT('',(151.375,-134.8000002255,1.585)); +#130159 = DIRECTION('',(0.,0.,-1.)); +#130160 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#130161 = ORIENTED_EDGE('',*,*,#130162,.T.); +#130162 = EDGE_CURVE('',#130154,#130163,#130165,.T.); +#130163 = VERTEX_POINT('',#130164); +#130164 = CARTESIAN_POINT('',(151.315,-133.66,1.585)); +#130165 = LINE('',#130166,#130167); +#130166 = CARTESIAN_POINT('',(151.315,-134.8,1.585)); +#130167 = VECTOR('',#130168,1.); +#130168 = DIRECTION('',(0.,1.,0.)); +#130169 = ORIENTED_EDGE('',*,*,#130170,.T.); +#130170 = EDGE_CURVE('',#130163,#130171,#130173,.T.); +#130171 = VERTEX_POINT('',#130172); +#130172 = CARTESIAN_POINT('',(145.035,-133.66,1.585)); +#130173 = LINE('',#130174,#130175); +#130174 = CARTESIAN_POINT('',(151.315,-133.66,1.585)); +#130175 = VECTOR('',#130176,1.); +#130176 = DIRECTION('',(-1.,0.,0.)); +#130177 = ORIENTED_EDGE('',*,*,#130178,.T.); +#130178 = EDGE_CURVE('',#130171,#130179,#130181,.T.); +#130179 = VERTEX_POINT('',#130180); +#130180 = CARTESIAN_POINT('',(145.035,-134.8,1.585)); +#130181 = LINE('',#130182,#130183); +#130182 = CARTESIAN_POINT('',(145.035,-133.66,1.585)); +#130183 = VECTOR('',#130184,1.); +#130184 = DIRECTION('',(0.,-1.,0.)); +#130185 = ORIENTED_EDGE('',*,*,#130186,.T.); +#130186 = EDGE_CURVE('',#130179,#130187,#130189,.T.); +#130187 = VERTEX_POINT('',#130188); +#130188 = CARTESIAN_POINT('',(144.915,-134.8,1.585)); +#130189 = CIRCLE('',#130190,6.000000000042E-02); +#130190 = AXIS2_PLACEMENT_3D('',#130191,#130192,#130193); +#130191 = CARTESIAN_POINT('',(144.975,-134.8000002255,1.585)); +#130192 = DIRECTION('',(0.,0.,-1.)); +#130193 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#130194 = ORIENTED_EDGE('',*,*,#130195,.T.); +#130195 = EDGE_CURVE('',#130187,#130118,#130196,.T.); +#130196 = LINE('',#130197,#130198); +#130197 = CARTESIAN_POINT('',(144.915,-134.8,1.585)); +#130198 = VECTOR('',#130199,1.); +#130199 = DIRECTION('',(0.,1.,0.)); +#130200 = PLANE('',#130201); +#130201 = AXIS2_PLACEMENT_3D('',#130202,#130203,#130204); +#130202 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130203 = DIRECTION('',(0.,0.,1.)); +#130204 = DIRECTION('',(1.,0.,-0.)); +#130205 = SHELL_BASED_SURFACE_MODEL('',(#130206)); +#130206 = OPEN_SHELL('',(#130207)); +#130207 = ADVANCED_FACE('',(#130208),#130480,.T.); +#130208 = FACE_BOUND('',#130209,.F.); +#130209 = EDGE_LOOP('',(#130210,#130221,#130229,#130237,#130246,#130254, + #130262,#130270,#130278,#130286,#130294,#130302,#130311,#130319, + #130327,#130335,#130343,#130351,#130360,#130368,#130376,#130385, + #130393,#130401,#130409,#130417,#130425,#130433,#130441,#130450, + #130458,#130466,#130474)); +#130210 = ORIENTED_EDGE('',*,*,#130211,.T.); +#130211 = EDGE_CURVE('',#130212,#130214,#130216,.T.); +#130212 = VERTEX_POINT('',#130213); +#130213 = CARTESIAN_POINT('',(124.90079,-133.450873,1.585)); +#130214 = VERTEX_POINT('',#130215); +#130215 = CARTESIAN_POINT('',(125.024119,-133.491982,1.585)); +#130216 = CIRCLE('',#130217,6.499998485138E-02); +#130217 = AXIS2_PLACEMENT_3D('',#130218,#130219,#130220); +#130218 = CARTESIAN_POINT('',(124.96245436584,-133.4714279024,1.585)); +#130219 = DIRECTION('',(0.,0.,-1.)); +#130220 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#130221 = ORIENTED_EDGE('',*,*,#130222,.T.); +#130222 = EDGE_CURVE('',#130214,#130223,#130225,.T.); +#130223 = VERTEX_POINT('',#130224); +#130224 = CARTESIAN_POINT('',(124.984597,-133.610547,1.585)); +#130225 = LINE('',#130226,#130227); +#130226 = CARTESIAN_POINT('',(125.024119,-133.491982,1.585)); +#130227 = VECTOR('',#130228,1.); +#130228 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#130229 = ORIENTED_EDGE('',*,*,#130230,.T.); +#130230 = EDGE_CURVE('',#130223,#130231,#130233,.T.); +#130231 = VERTEX_POINT('',#130232); +#130232 = CARTESIAN_POINT('',(124.984597,-133.79894,1.585)); +#130233 = LINE('',#130234,#130235); +#130234 = CARTESIAN_POINT('',(124.984597,-133.610547,1.585)); +#130235 = VECTOR('',#130236,1.); +#130236 = DIRECTION('',(0.,-1.,0.)); +#130237 = ORIENTED_EDGE('',*,*,#130238,.T.); +#130238 = EDGE_CURVE('',#130231,#130239,#130241,.T.); +#130239 = VERTEX_POINT('',#130240); +#130240 = CARTESIAN_POINT('',(125.10637,-133.920714,1.585)); +#130241 = CIRCLE('',#130242,0.170995888391); +#130242 = AXIS2_PLACEMENT_3D('',#130243,#130244,#130245); +#130243 = CARTESIAN_POINT('',(125.1499473225,-133.7553640353,1.585)); +#130244 = DIRECTION('',(0.,0.,1.)); +#130245 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#130246 = ORIENTED_EDGE('',*,*,#130247,.T.); +#130247 = EDGE_CURVE('',#130239,#130248,#130250,.T.); +#130248 = VERTEX_POINT('',#130249); +#130249 = CARTESIAN_POINT('',(125.161395,-133.920714,1.585)); +#130250 = LINE('',#130251,#130252); +#130251 = CARTESIAN_POINT('',(125.10637,-133.920714,1.585)); +#130252 = VECTOR('',#130253,1.); +#130253 = DIRECTION('',(1.,0.,0.)); +#130254 = ORIENTED_EDGE('',*,*,#130255,.T.); +#130255 = EDGE_CURVE('',#130248,#130256,#130258,.T.); +#130256 = VERTEX_POINT('',#130257); +#130257 = CARTESIAN_POINT('',(125.223951,-133.889436,1.585)); +#130258 = LINE('',#130259,#130260); +#130259 = CARTESIAN_POINT('',(125.161395,-133.920714,1.585)); +#130260 = VECTOR('',#130261,1.); +#130261 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#130262 = ORIENTED_EDGE('',*,*,#130263,.T.); +#130263 = EDGE_CURVE('',#130256,#130264,#130266,.T.); +#130264 = VERTEX_POINT('',#130265); +#130265 = CARTESIAN_POINT('',(125.251889,-133.861497,1.585)); +#130266 = LINE('',#130267,#130268); +#130267 = CARTESIAN_POINT('',(125.223951,-133.889436,1.585)); +#130268 = VECTOR('',#130269,1.); +#130269 = DIRECTION('',(0.707094126372,0.707119435775,0.)); +#130270 = ORIENTED_EDGE('',*,*,#130271,.T.); +#130271 = EDGE_CURVE('',#130264,#130272,#130274,.T.); +#130272 = VERTEX_POINT('',#130273); +#130273 = CARTESIAN_POINT('',(125.286839,-133.791596,1.585)); +#130274 = LINE('',#130275,#130276); +#130275 = CARTESIAN_POINT('',(125.251889,-133.861497,1.585)); +#130276 = VECTOR('',#130277,1.); +#130277 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#130278 = ORIENTED_EDGE('',*,*,#130279,.T.); +#130279 = EDGE_CURVE('',#130272,#130280,#130282,.T.); +#130280 = VERTEX_POINT('',#130281); +#130281 = CARTESIAN_POINT('',(125.332887,-133.613788,1.585)); +#130282 = LINE('',#130283,#130284); +#130283 = CARTESIAN_POINT('',(125.286839,-133.791596,1.585)); +#130284 = VECTOR('',#130285,1.); +#130285 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#130286 = ORIENTED_EDGE('',*,*,#130287,.T.); +#130287 = EDGE_CURVE('',#130280,#130288,#130290,.T.); +#130288 = VERTEX_POINT('',#130289); +#130289 = CARTESIAN_POINT('',(125.38792,-133.511181,1.585)); +#130290 = LINE('',#130291,#130292); +#130291 = CARTESIAN_POINT('',(125.332887,-133.613788,1.585)); +#130292 = VECTOR('',#130293,1.); +#130293 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#130294 = ORIENTED_EDGE('',*,*,#130295,.T.); +#130295 = EDGE_CURVE('',#130288,#130296,#130298,.T.); +#130296 = VERTEX_POINT('',#130297); +#130297 = CARTESIAN_POINT('',(125.447671,-133.456147,1.585)); +#130298 = LINE('',#130299,#130300); +#130299 = CARTESIAN_POINT('',(125.38792,-133.511181,1.585)); +#130300 = VECTOR('',#130301,1.); +#130301 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#130302 = ORIENTED_EDGE('',*,*,#130303,.T.); +#130303 = EDGE_CURVE('',#130296,#130304,#130306,.T.); +#130304 = VERTEX_POINT('',#130305); +#130305 = CARTESIAN_POINT('',(125.677237,-133.41329,1.585)); +#130306 = CIRCLE('',#130307,0.258971949836); +#130307 = AXIS2_PLACEMENT_3D('',#130308,#130309,#130310); +#130308 = CARTESIAN_POINT('',(125.60487456064,-133.6619466873,1.585)); +#130309 = DIRECTION('',(0.,0.,-1.)); +#130310 = DIRECTION('',(-0.607029296992,0.794679452732,0.)); +#130311 = ORIENTED_EDGE('',*,*,#130312,.T.); +#130312 = EDGE_CURVE('',#130304,#130313,#130315,.T.); +#130313 = VERTEX_POINT('',#130314); +#130314 = CARTESIAN_POINT('',(125.779844,-133.468323,1.585)); +#130315 = LINE('',#130316,#130317); +#130316 = CARTESIAN_POINT('',(125.677237,-133.41329,1.585)); +#130317 = VECTOR('',#130318,1.); +#130318 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#130319 = ORIENTED_EDGE('',*,*,#130320,.T.); +#130320 = EDGE_CURVE('',#130313,#130321,#130323,.T.); +#130321 = VERTEX_POINT('',#130322); +#130322 = CARTESIAN_POINT('',(125.834878,-133.528074,1.585)); +#130323 = LINE('',#130324,#130325); +#130324 = CARTESIAN_POINT('',(125.779844,-133.468323,1.585)); +#130325 = VECTOR('',#130326,1.); +#130326 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#130327 = ORIENTED_EDGE('',*,*,#130328,.T.); +#130328 = EDGE_CURVE('',#130321,#130329,#130331,.T.); +#130329 = VERTEX_POINT('',#130330); +#130330 = CARTESIAN_POINT('',(125.881681,-133.6282,1.585)); +#130331 = LINE('',#130332,#130333); +#130332 = CARTESIAN_POINT('',(125.834878,-133.528074,1.585)); +#130333 = VECTOR('',#130334,1.); +#130334 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#130335 = ORIENTED_EDGE('',*,*,#130336,.T.); +#130336 = EDGE_CURVE('',#130329,#130337,#130339,.T.); +#130337 = VERTEX_POINT('',#130338); +#130338 = CARTESIAN_POINT('',(125.882563,-133.867365,1.585)); +#130339 = LINE('',#130340,#130341); +#130340 = CARTESIAN_POINT('',(125.881681,-133.6282,1.585)); +#130341 = VECTOR('',#130342,1.); +#130342 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#130343 = ORIENTED_EDGE('',*,*,#130344,.T.); +#130344 = EDGE_CURVE('',#130337,#130345,#130347,.T.); +#130345 = VERTEX_POINT('',#130346); +#130346 = CARTESIAN_POINT('',(125.838404,-134.006269,1.585)); +#130347 = LINE('',#130348,#130349); +#130348 = CARTESIAN_POINT('',(125.882563,-133.867365,1.585)); +#130349 = VECTOR('',#130350,1.); +#130350 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#130351 = ORIENTED_EDGE('',*,*,#130352,.T.); +#130352 = EDGE_CURVE('',#130345,#130353,#130355,.T.); +#130353 = VERTEX_POINT('',#130354); +#130354 = CARTESIAN_POINT('',(125.715076,-133.965159,1.585)); +#130355 = CIRCLE('',#130356,6.499966862258E-02); +#130356 = AXIS2_PLACEMENT_3D('',#130357,#130358,#130359); +#130357 = CARTESIAN_POINT('',(125.77674006734,-133.9857137979,1.585)); +#130358 = DIRECTION('',(-0.,0.,-1.)); +#130359 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#130360 = ORIENTED_EDGE('',*,*,#130361,.T.); +#130361 = EDGE_CURVE('',#130353,#130362,#130364,.T.); +#130362 = VERTEX_POINT('',#130363); +#130363 = CARTESIAN_POINT('',(125.754597,-133.846596,1.585)); +#130364 = LINE('',#130365,#130366); +#130365 = CARTESIAN_POINT('',(125.715076,-133.965159,1.585)); +#130366 = VECTOR('',#130367,1.); +#130367 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#130368 = ORIENTED_EDGE('',*,*,#130369,.T.); +#130369 = EDGE_CURVE('',#130362,#130370,#130372,.T.); +#130370 = VERTEX_POINT('',#130371); +#130371 = CARTESIAN_POINT('',(125.754597,-133.658202,1.585)); +#130372 = LINE('',#130373,#130374); +#130373 = CARTESIAN_POINT('',(125.754597,-133.846596,1.585)); +#130374 = VECTOR('',#130375,1.); +#130375 = DIRECTION('',(0.,1.,0.)); +#130376 = ORIENTED_EDGE('',*,*,#130377,.T.); +#130377 = EDGE_CURVE('',#130370,#130378,#130380,.T.); +#130378 = VERTEX_POINT('',#130379); +#130379 = CARTESIAN_POINT('',(125.632823,-133.536428,1.585)); +#130380 = CIRCLE('',#130381,0.170999251022); +#130381 = AXIS2_PLACEMENT_3D('',#130382,#130383,#130384); +#130382 = CARTESIAN_POINT('',(125.589244,-133.701781,1.585)); +#130383 = DIRECTION('',(0.,0.,1.)); +#130384 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#130385 = ORIENTED_EDGE('',*,*,#130386,.T.); +#130386 = EDGE_CURVE('',#130378,#130387,#130389,.T.); +#130387 = VERTEX_POINT('',#130388); +#130388 = CARTESIAN_POINT('',(125.577799,-133.536428,1.585)); +#130389 = LINE('',#130390,#130391); +#130390 = CARTESIAN_POINT('',(125.632823,-133.536428,1.585)); +#130391 = VECTOR('',#130392,1.); +#130392 = DIRECTION('',(-1.,0.,0.)); +#130393 = ORIENTED_EDGE('',*,*,#130394,.T.); +#130394 = EDGE_CURVE('',#130387,#130395,#130397,.T.); +#130395 = VERTEX_POINT('',#130396); +#130396 = CARTESIAN_POINT('',(125.515243,-133.567706,1.585)); +#130397 = LINE('',#130398,#130399); +#130398 = CARTESIAN_POINT('',(125.577799,-133.536428,1.585)); +#130399 = VECTOR('',#130400,1.); +#130400 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#130401 = ORIENTED_EDGE('',*,*,#130402,.T.); +#130402 = EDGE_CURVE('',#130395,#130403,#130405,.T.); +#130403 = VERTEX_POINT('',#130404); +#130404 = CARTESIAN_POINT('',(125.487303,-133.595646,1.585)); +#130405 = LINE('',#130406,#130407); +#130406 = CARTESIAN_POINT('',(125.515243,-133.567706,1.585)); +#130407 = VECTOR('',#130408,1.); +#130408 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#130409 = ORIENTED_EDGE('',*,*,#130410,.T.); +#130410 = EDGE_CURVE('',#130403,#130411,#130413,.T.); +#130411 = VERTEX_POINT('',#130412); +#130412 = CARTESIAN_POINT('',(125.452353,-133.665546,1.585)); +#130413 = LINE('',#130414,#130415); +#130414 = CARTESIAN_POINT('',(125.487303,-133.595646,1.585)); +#130415 = VECTOR('',#130416,1.); +#130416 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#130417 = ORIENTED_EDGE('',*,*,#130418,.T.); +#130418 = EDGE_CURVE('',#130411,#130419,#130421,.T.); +#130419 = VERTEX_POINT('',#130420); +#130420 = CARTESIAN_POINT('',(125.406306,-133.843354,1.585)); +#130421 = LINE('',#130422,#130423); +#130422 = CARTESIAN_POINT('',(125.452353,-133.665546,1.585)); +#130423 = VECTOR('',#130424,1.); +#130424 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#130425 = ORIENTED_EDGE('',*,*,#130426,.T.); +#130426 = EDGE_CURVE('',#130419,#130427,#130429,.T.); +#130427 = VERTEX_POINT('',#130428); +#130428 = CARTESIAN_POINT('',(125.351273,-133.945962,1.585)); +#130429 = LINE('',#130430,#130431); +#130430 = CARTESIAN_POINT('',(125.406306,-133.843354,1.585)); +#130431 = VECTOR('',#130432,1.); +#130432 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#130433 = ORIENTED_EDGE('',*,*,#130434,.T.); +#130434 = EDGE_CURVE('',#130427,#130435,#130437,.T.); +#130435 = VERTEX_POINT('',#130436); +#130436 = CARTESIAN_POINT('',(125.291523,-134.000995,1.585)); +#130437 = LINE('',#130438,#130439); +#130438 = CARTESIAN_POINT('',(125.351273,-133.945962,1.585)); +#130439 = VECTOR('',#130440,1.); +#130440 = DIRECTION('',(-0.73554445943,-0.677476455829,0.)); +#130441 = ORIENTED_EDGE('',*,*,#130442,.T.); +#130442 = EDGE_CURVE('',#130435,#130443,#130445,.T.); +#130443 = VERTEX_POINT('',#130444); +#130444 = CARTESIAN_POINT('',(124.968013,-133.994608,1.585)); +#130445 = CIRCLE('',#130446,0.260197694649); +#130446 = AXIS2_PLACEMENT_3D('',#130447,#130448,#130449); +#130447 = CARTESIAN_POINT('',(125.13379048924,-133.7940570978,1.585)); +#130448 = DIRECTION('',(-0.,0.,-1.)); +#130449 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#130450 = ORIENTED_EDGE('',*,*,#130451,.T.); +#130451 = EDGE_CURVE('',#130443,#130452,#130454,.T.); +#130452 = VERTEX_POINT('',#130453); +#130453 = CARTESIAN_POINT('',(124.910702,-133.937297,1.585)); +#130454 = LINE('',#130455,#130456); +#130455 = CARTESIAN_POINT('',(124.968013,-133.994608,1.585)); +#130456 = VECTOR('',#130457,1.); +#130457 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#130458 = ORIENTED_EDGE('',*,*,#130459,.T.); +#130459 = EDGE_CURVE('',#130452,#130460,#130462,.T.); +#130460 = VERTEX_POINT('',#130461); +#130461 = CARTESIAN_POINT('',(124.857512,-133.828941,1.585)); +#130462 = LINE('',#130463,#130464); +#130463 = CARTESIAN_POINT('',(124.910702,-133.937297,1.585)); +#130464 = VECTOR('',#130465,1.); +#130465 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#130466 = ORIENTED_EDGE('',*,*,#130467,.T.); +#130467 = EDGE_CURVE('',#130460,#130468,#130470,.T.); +#130468 = VERTEX_POINT('',#130469); +#130469 = CARTESIAN_POINT('',(124.85663,-133.589777,1.585)); +#130470 = LINE('',#130471,#130472); +#130471 = CARTESIAN_POINT('',(124.857512,-133.828941,1.585)); +#130472 = VECTOR('',#130473,1.); +#130473 = DIRECTION('',(-3.687820919426E-03,0.999993199965,0.)); +#130474 = ORIENTED_EDGE('',*,*,#130475,.T.); +#130475 = EDGE_CURVE('',#130468,#130212,#130476,.T.); +#130476 = LINE('',#130477,#130478); +#130477 = CARTESIAN_POINT('',(124.85663,-133.589777,1.585)); +#130478 = VECTOR('',#130479,1.); +#130479 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#130480 = PLANE('',#130481); +#130481 = AXIS2_PLACEMENT_3D('',#130482,#130483,#130484); +#130482 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130483 = DIRECTION('',(0.,0.,1.)); +#130484 = DIRECTION('',(1.,0.,-0.)); +#130485 = SHELL_BASED_SURFACE_MODEL('',(#130486)); +#130486 = OPEN_SHELL('',(#130487)); +#130487 = ADVANCED_FACE('',(#130488),#130729,.T.); +#130488 = FACE_BOUND('',#130489,.F.); +#130489 = EDGE_LOOP('',(#130490,#130501,#130509,#130517,#130525,#130533, + #130542,#130550,#130559,#130567,#130575,#130583,#130591,#130599, + #130607,#130616,#130624,#130632,#130640,#130648,#130657,#130665, + #130673,#130681,#130690,#130698,#130706,#130714,#130723)); +#130490 = ORIENTED_EDGE('',*,*,#130491,.T.); +#130491 = EDGE_CURVE('',#130492,#130494,#130496,.T.); +#130492 = VERTEX_POINT('',#130493); +#130493 = CARTESIAN_POINT('',(127.908882,-132.842856,1.585)); +#130494 = VERTEX_POINT('',#130495); +#130495 = CARTESIAN_POINT('',(127.973882,-132.777856,1.585)); +#130496 = CIRCLE('',#130497,6.500103935387E-02); +#130497 = AXIS2_PLACEMENT_3D('',#130498,#130499,#130500); +#130498 = CARTESIAN_POINT('',(127.97388303934,-132.8428570393,1.585)); +#130499 = DIRECTION('',(0.,0.,-1.)); +#130500 = DIRECTION('',(-0.999999999872,1.598967605495E-05,0.)); +#130501 = ORIENTED_EDGE('',*,*,#130502,.T.); +#130502 = EDGE_CURVE('',#130494,#130503,#130505,.T.); +#130503 = VERTEX_POINT('',#130504); +#130504 = CARTESIAN_POINT('',(128.273882,-132.777856,1.585)); +#130505 = LINE('',#130506,#130507); +#130506 = CARTESIAN_POINT('',(127.973882,-132.777856,1.585)); +#130507 = VECTOR('',#130508,1.); +#130508 = DIRECTION('',(1.,0.,0.)); +#130509 = ORIENTED_EDGE('',*,*,#130510,.T.); +#130510 = EDGE_CURVE('',#130503,#130511,#130513,.T.); +#130511 = VERTEX_POINT('',#130512); +#130512 = CARTESIAN_POINT('',(128.298756,-132.782804,1.585)); +#130513 = LINE('',#130514,#130515); +#130514 = CARTESIAN_POINT('',(128.273882,-132.777856,1.585)); +#130515 = VECTOR('',#130516,1.); +#130516 = DIRECTION('',(0.98078336573,-0.19509994748,0.)); +#130517 = ORIENTED_EDGE('',*,*,#130518,.T.); +#130518 = EDGE_CURVE('',#130511,#130519,#130521,.T.); +#130519 = VERTEX_POINT('',#130520); +#130520 = CARTESIAN_POINT('',(128.319843,-132.796894,1.585)); +#130521 = LINE('',#130522,#130523); +#130522 = CARTESIAN_POINT('',(128.298756,-132.782804,1.585)); +#130523 = VECTOR('',#130524,1.); +#130524 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#130525 = ORIENTED_EDGE('',*,*,#130526,.T.); +#130526 = EDGE_CURVE('',#130519,#130527,#130529,.T.); +#130527 = VERTEX_POINT('',#130528); +#130528 = CARTESIAN_POINT('',(128.371003,-132.852175,1.585)); +#130529 = LINE('',#130530,#130531); +#130530 = CARTESIAN_POINT('',(128.319843,-132.796894,1.585)); +#130531 = VECTOR('',#130532,1.); +#130532 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#130533 = ORIENTED_EDGE('',*,*,#130534,.T.); +#130534 = EDGE_CURVE('',#130527,#130535,#130537,.T.); +#130535 = VERTEX_POINT('',#130536); +#130536 = CARTESIAN_POINT('',(128.370999,-133.262113,1.585)); +#130537 = CIRCLE('',#130538,0.409312568567); +#130538 = AXIS2_PLACEMENT_3D('',#130539,#130540,#130541); +#130539 = CARTESIAN_POINT('',(128.01670664806,-133.0571405429,1.585)); +#130540 = DIRECTION('',(0.,0.,-1.)); +#130541 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#130542 = ORIENTED_EDGE('',*,*,#130543,.T.); +#130543 = EDGE_CURVE('',#130535,#130544,#130546,.T.); +#130544 = VERTEX_POINT('',#130545); +#130545 = CARTESIAN_POINT('',(128.268322,-133.366036,1.585)); +#130546 = LINE('',#130547,#130548); +#130547 = CARTESIAN_POINT('',(128.370999,-133.262113,1.585)); +#130548 = VECTOR('',#130549,1.); +#130549 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#130550 = ORIENTED_EDGE('',*,*,#130551,.T.); +#130551 = EDGE_CURVE('',#130544,#130552,#130554,.T.); +#130552 = VERTEX_POINT('',#130553); +#130553 = CARTESIAN_POINT('',(127.829546,-133.463058,1.585)); +#130554 = CIRCLE('',#130555,0.675422176574); +#130555 = AXIS2_PLACEMENT_3D('',#130556,#130557,#130558); +#130556 = CARTESIAN_POINT('',(127.91141275007,-132.7926156446,1.585)); +#130557 = DIRECTION('',(0.,0.,-1.)); +#130558 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#130559 = ORIENTED_EDGE('',*,*,#130560,.T.); +#130560 = EDGE_CURVE('',#130552,#130561,#130563,.T.); +#130561 = VERTEX_POINT('',#130562); +#130562 = CARTESIAN_POINT('',(127.644813,-133.41528,1.585)); +#130563 = LINE('',#130564,#130565); +#130564 = CARTESIAN_POINT('',(127.829546,-133.463058,1.585)); +#130565 = VECTOR('',#130566,1.); +#130566 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#130567 = ORIENTED_EDGE('',*,*,#130568,.T.); +#130568 = EDGE_CURVE('',#130561,#130569,#130571,.T.); +#130569 = VERTEX_POINT('',#130570); +#130570 = CARTESIAN_POINT('',(127.542206,-133.360247,1.585)); +#130571 = LINE('',#130572,#130573); +#130572 = CARTESIAN_POINT('',(127.644813,-133.41528,1.585)); +#130573 = VECTOR('',#130574,1.); +#130574 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#130575 = ORIENTED_EDGE('',*,*,#130576,.T.); +#130576 = EDGE_CURVE('',#130569,#130577,#130579,.T.); +#130577 = VERTEX_POINT('',#130578); +#130578 = CARTESIAN_POINT('',(127.448191,-133.262109,1.585)); +#130579 = LINE('',#130580,#130581); +#130580 = CARTESIAN_POINT('',(127.542206,-133.360247,1.585)); +#130581 = VECTOR('',#130582,1.); +#130582 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#130583 = ORIENTED_EDGE('',*,*,#130584,.T.); +#130584 = EDGE_CURVE('',#130577,#130585,#130587,.T.); +#130585 = VERTEX_POINT('',#130586); +#130586 = CARTESIAN_POINT('',(127.39663,-133.110221,1.585)); +#130587 = LINE('',#130588,#130589); +#130588 = CARTESIAN_POINT('',(127.448191,-133.262109,1.585)); +#130589 = VECTOR('',#130590,1.); +#130590 = DIRECTION('',(-0.321450486559,0.946926388211,0.)); +#130591 = ORIENTED_EDGE('',*,*,#130592,.T.); +#130592 = EDGE_CURVE('',#130585,#130593,#130595,.T.); +#130593 = VERTEX_POINT('',#130594); +#130594 = CARTESIAN_POINT('',(127.397512,-132.956771,1.585)); +#130595 = LINE('',#130596,#130597); +#130596 = CARTESIAN_POINT('',(127.39663,-133.110221,1.585)); +#130597 = VECTOR('',#130598,1.); +#130598 = DIRECTION('',(5.747705643239E-03,0.999983481803,0.)); +#130599 = ORIENTED_EDGE('',*,*,#130600,.T.); +#130600 = EDGE_CURVE('',#130593,#130601,#130603,.T.); +#130601 = VERTEX_POINT('',#130602); +#130602 = CARTESIAN_POINT('',(127.444316,-132.856644,1.585)); +#130603 = LINE('',#130604,#130605); +#130604 = CARTESIAN_POINT('',(127.397512,-132.956771,1.585)); +#130605 = VECTOR('',#130606,1.); +#130606 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#130607 = ORIENTED_EDGE('',*,*,#130608,.T.); +#130608 = EDGE_CURVE('',#130601,#130609,#130611,.T.); +#130609 = VERTEX_POINT('',#130610); +#130610 = CARTESIAN_POINT('',(127.560592,-132.914782,1.585)); +#130611 = CIRCLE('',#130612,6.500026004258E-02); +#130612 = AXIS2_PLACEMENT_3D('',#130613,#130614,#130615); +#130613 = CARTESIAN_POINT('',(127.50245365279,-132.8857136944,1.585)); +#130614 = DIRECTION('',(0.,0.,-1.)); +#130615 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#130616 = ORIENTED_EDGE('',*,*,#130617,.T.); +#130617 = EDGE_CURVE('',#130609,#130618,#130620,.T.); +#130618 = VERTEX_POINT('',#130619); +#130619 = CARTESIAN_POINT('',(127.524597,-132.986772,1.585)); +#130620 = LINE('',#130621,#130622); +#130621 = CARTESIAN_POINT('',(127.560592,-132.914782,1.585)); +#130622 = VECTOR('',#130623,1.); +#130623 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#130624 = ORIENTED_EDGE('',*,*,#130625,.T.); +#130625 = EDGE_CURVE('',#130618,#130626,#130628,.T.); +#130626 = VERTEX_POINT('',#130627); +#130627 = CARTESIAN_POINT('',(127.524597,-133.089452,1.585)); +#130628 = LINE('',#130629,#130630); +#130629 = CARTESIAN_POINT('',(127.524597,-132.986772,1.585)); +#130630 = VECTOR('',#130631,1.); +#130631 = DIRECTION('',(0.,-1.,0.)); +#130632 = ORIENTED_EDGE('',*,*,#130633,.T.); +#130633 = EDGE_CURVE('',#130626,#130634,#130636,.T.); +#130634 = VERTEX_POINT('',#130635); +#130635 = CARTESIAN_POINT('',(127.559265,-133.193457,1.585)); +#130636 = LINE('',#130637,#130638); +#130637 = CARTESIAN_POINT('',(127.524597,-133.089452,1.585)); +#130638 = VECTOR('',#130639,1.); +#130639 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#130640 = ORIENTED_EDGE('',*,*,#130641,.T.); +#130641 = EDGE_CURVE('',#130634,#130642,#130644,.T.); +#130642 = VERTEX_POINT('',#130643); +#130643 = CARTESIAN_POINT('',(127.626669,-133.260863,1.585)); +#130644 = LINE('',#130645,#130646); +#130645 = CARTESIAN_POINT('',(127.559265,-133.193457,1.585)); +#130646 = VECTOR('',#130647,1.); +#130647 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#130648 = ORIENTED_EDGE('',*,*,#130649,.T.); +#130649 = EDGE_CURVE('',#130642,#130650,#130652,.T.); +#130650 = VERTEX_POINT('',#130651); +#130651 = CARTESIAN_POINT('',(127.965881,-133.334999,1.585)); +#130652 = CIRCLE('',#130653,0.553317785494); +#130653 = AXIS2_PLACEMENT_3D('',#130654,#130655,#130656); +#130654 = CARTESIAN_POINT('',(127.9084500839,-132.7846697697,1.585)); +#130655 = DIRECTION('',(0.,0.,1.)); +#130656 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#130657 = ORIENTED_EDGE('',*,*,#130658,.T.); +#130658 = EDGE_CURVE('',#130650,#130659,#130661,.T.); +#130659 = VERTEX_POINT('',#130660); +#130660 = CARTESIAN_POINT('',(128.122622,-133.295813,1.585)); +#130661 = LINE('',#130662,#130663); +#130662 = CARTESIAN_POINT('',(127.965881,-133.334999,1.585)); +#130663 = VECTOR('',#130664,1.); +#130664 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#130665 = ORIENTED_EDGE('',*,*,#130666,.T.); +#130666 = EDGE_CURVE('',#130659,#130667,#130669,.T.); +#130667 = VERTEX_POINT('',#130668); +#130668 = CARTESIAN_POINT('',(128.192522,-133.260864,1.585)); +#130669 = LINE('',#130670,#130671); +#130670 = CARTESIAN_POINT('',(128.122622,-133.295813,1.585)); +#130671 = VECTOR('',#130672,1.); +#130672 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#130673 = ORIENTED_EDGE('',*,*,#130674,.T.); +#130674 = EDGE_CURVE('',#130667,#130675,#130677,.T.); +#130675 = VERTEX_POINT('',#130676); +#130676 = CARTESIAN_POINT('',(128.259928,-133.193457,1.585)); +#130677 = LINE('',#130678,#130679); +#130678 = CARTESIAN_POINT('',(128.192522,-133.260864,1.585)); +#130679 = VECTOR('',#130680,1.); +#130680 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#130681 = ORIENTED_EDGE('',*,*,#130682,.T.); +#130682 = EDGE_CURVE('',#130675,#130683,#130685,.T.); +#130683 = VERTEX_POINT('',#130684); +#130684 = CARTESIAN_POINT('',(128.259928,-132.920825,1.585)); +#130685 = CIRCLE('',#130686,0.272194686174); +#130686 = AXIS2_PLACEMENT_3D('',#130687,#130688,#130689); +#130687 = CARTESIAN_POINT('',(128.02432686391,-133.057141,1.585)); +#130688 = DIRECTION('',(0.,-0.,1.)); +#130689 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#130690 = ORIENTED_EDGE('',*,*,#130691,.T.); +#130691 = EDGE_CURVE('',#130683,#130692,#130694,.T.); +#130692 = VERTEX_POINT('',#130693); +#130693 = CARTESIAN_POINT('',(128.246959,-132.907856,1.585)); +#130694 = LINE('',#130695,#130696); +#130695 = CARTESIAN_POINT('',(128.259928,-132.920825,1.585)); +#130696 = VECTOR('',#130697,1.); +#130697 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#130698 = ORIENTED_EDGE('',*,*,#130699,.T.); +#130699 = EDGE_CURVE('',#130692,#130700,#130702,.T.); +#130700 = VERTEX_POINT('',#130701); +#130701 = CARTESIAN_POINT('',(128.038882,-132.907856,1.585)); +#130702 = LINE('',#130703,#130704); +#130703 = CARTESIAN_POINT('',(128.246959,-132.907856,1.585)); +#130704 = VECTOR('',#130705,1.); +#130705 = DIRECTION('',(-1.,0.,0.)); +#130706 = ORIENTED_EDGE('',*,*,#130707,.T.); +#130707 = EDGE_CURVE('',#130700,#130708,#130710,.T.); +#130708 = VERTEX_POINT('',#130709); +#130709 = CARTESIAN_POINT('',(128.038882,-133.014285,1.585)); +#130710 = LINE('',#130711,#130712); +#130711 = CARTESIAN_POINT('',(128.038882,-132.907856,1.585)); +#130712 = VECTOR('',#130713,1.); +#130713 = DIRECTION('',(0.,-1.,0.)); +#130714 = ORIENTED_EDGE('',*,*,#130715,.T.); +#130715 = EDGE_CURVE('',#130708,#130716,#130718,.T.); +#130716 = VERTEX_POINT('',#130717); +#130717 = CARTESIAN_POINT('',(127.908882,-133.014285,1.585)); +#130718 = CIRCLE('',#130719,6.500000000091E-02); +#130719 = AXIS2_PLACEMENT_3D('',#130720,#130721,#130722); +#130720 = CARTESIAN_POINT('',(127.973882,-133.0142846551,1.585)); +#130721 = DIRECTION('',(-0.,0.,-1.)); +#130722 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#130723 = ORIENTED_EDGE('',*,*,#130724,.T.); +#130724 = EDGE_CURVE('',#130716,#130492,#130725,.T.); +#130725 = LINE('',#130726,#130727); +#130726 = CARTESIAN_POINT('',(127.908882,-133.014285,1.585)); +#130727 = VECTOR('',#130728,1.); +#130728 = DIRECTION('',(0.,1.,0.)); +#130729 = PLANE('',#130730); +#130730 = AXIS2_PLACEMENT_3D('',#130731,#130732,#130733); +#130731 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130732 = DIRECTION('',(0.,0.,1.)); +#130733 = DIRECTION('',(1.,0.,-0.)); +#130734 = SHELL_BASED_SURFACE_MODEL('',(#130735)); +#130735 = OPEN_SHELL('',(#130736)); +#130736 = ADVANCED_FACE('',(#130737),#130864,.T.); +#130737 = FACE_BOUND('',#130738,.F.); +#130738 = EDGE_LOOP('',(#130739,#130750,#130758,#130767,#130775,#130783, + #130792,#130800,#130809,#130817,#130825,#130834,#130842,#130850, + #130858)); +#130739 = ORIENTED_EDGE('',*,*,#130740,.T.); +#130740 = EDGE_CURVE('',#130741,#130743,#130745,.T.); +#130741 = VERTEX_POINT('',#130742); +#130742 = CARTESIAN_POINT('',(124.855417,-132.410288,1.585)); +#130743 = VERTEX_POINT('',#130744); +#130744 = CARTESIAN_POINT('',(124.934652,-132.336768,1.585)); +#130745 = CIRCLE('',#130746,6.499974290214E-02); +#130746 = AXIS2_PLACEMENT_3D('',#130747,#130748,#130749); +#130747 = CARTESIAN_POINT('',(124.91959745151,-132.4000003267,1.585)); +#130748 = DIRECTION('',(0.,0.,-1.)); +#130749 = DIRECTION('',(-0.987395467259,-0.158272522053,-0.)); +#130750 = ORIENTED_EDGE('',*,*,#130751,.T.); +#130751 = EDGE_CURVE('',#130743,#130752,#130754,.T.); +#130752 = VERTEX_POINT('',#130753); +#130753 = CARTESIAN_POINT('',(125.834652,-132.551052,1.585)); +#130754 = LINE('',#130755,#130756); +#130755 = CARTESIAN_POINT('',(124.934652,-132.336768,1.585)); +#130756 = VECTOR('',#130757,1.); +#130757 = DIRECTION('',(0.972806632197,-0.231618773749,0.)); +#130758 = ORIENTED_EDGE('',*,*,#130759,.T.); +#130759 = EDGE_CURVE('',#130752,#130760,#130762,.T.); +#130760 = VERTEX_POINT('',#130761); +#130761 = CARTESIAN_POINT('',(125.836345,-132.67709,1.585)); +#130762 = CIRCLE('',#130763,6.500038054112E-02); +#130763 = AXIS2_PLACEMENT_3D('',#130764,#130765,#130766); +#130764 = CARTESIAN_POINT('',(125.81959589274,-132.614284611,1.585)); +#130765 = DIRECTION('',(0.,0.,-1.)); +#130766 = DIRECTION('',(0.231631063247,0.972803706068,0.)); +#130767 = ORIENTED_EDGE('',*,*,#130768,.T.); +#130768 = EDGE_CURVE('',#130760,#130769,#130771,.T.); +#130769 = VERTEX_POINT('',#130770); +#130770 = CARTESIAN_POINT('',(125.429006,-132.785713,1.585)); +#130771 = LINE('',#130772,#130773); +#130772 = CARTESIAN_POINT('',(125.836345,-132.67709,1.585)); +#130773 = VECTOR('',#130774,1.); +#130774 = DIRECTION('',(-0.966235372674,-0.257661026531,0.)); +#130775 = ORIENTED_EDGE('',*,*,#130776,.T.); +#130776 = EDGE_CURVE('',#130769,#130777,#130779,.T.); +#130777 = VERTEX_POINT('',#130778); +#130778 = CARTESIAN_POINT('',(125.836345,-132.894337,1.585)); +#130779 = LINE('',#130780,#130781); +#130780 = CARTESIAN_POINT('',(125.429006,-132.785713,1.585)); +#130781 = VECTOR('',#130782,1.); +#130782 = DIRECTION('',(0.96623478212,-0.257663241116,0.)); +#130783 = ORIENTED_EDGE('',*,*,#130784,.T.); +#130784 = EDGE_CURVE('',#130777,#130785,#130787,.T.); +#130785 = VERTEX_POINT('',#130786); +#130786 = CARTESIAN_POINT('',(125.834653,-133.020374,1.585)); +#130787 = CIRCLE('',#130788,6.499990114103E-02); +#130788 = AXIS2_PLACEMENT_3D('',#130789,#130790,#130791); +#130789 = CARTESIAN_POINT('',(125.81959634257,-132.9571420127,1.585)); +#130790 = DIRECTION('',(0.,0.,-1.)); +#130791 = DIRECTION('',(0.257672044635,0.966232434466,0.)); +#130792 = ORIENTED_EDGE('',*,*,#130793,.T.); +#130793 = EDGE_CURVE('',#130785,#130794,#130796,.T.); +#130794 = VERTEX_POINT('',#130795); +#130795 = CARTESIAN_POINT('',(124.934652,-133.23466,1.585)); +#130796 = LINE('',#130797,#130798); +#130797 = CARTESIAN_POINT('',(125.834653,-133.020374,1.585)); +#130798 = VECTOR('',#130799,1.); +#130799 = DIRECTION('',(-0.972806203088,-0.231620576016,0.)); +#130800 = ORIENTED_EDGE('',*,*,#130801,.T.); +#130801 = EDGE_CURVE('',#130794,#130802,#130804,.T.); +#130802 = VERTEX_POINT('',#130803); +#130803 = CARTESIAN_POINT('',(124.904542,-133.108196,1.585)); +#130804 = CIRCLE('',#130805,6.499952960857E-02); +#130805 = AXIS2_PLACEMENT_3D('',#130806,#130807,#130808); +#130806 = CARTESIAN_POINT('',(124.91959643655,-133.1714281341,1.585)); +#130807 = DIRECTION('',(0.,0.,-1.)); +#130808 = DIRECTION('',(0.231625729228,-0.972804976118,0.)); +#130809 = ORIENTED_EDGE('',*,*,#130810,.T.); +#130810 = EDGE_CURVE('',#130802,#130811,#130813,.T.); +#130811 = VERTEX_POINT('',#130812); +#130812 = CARTESIAN_POINT('',(125.553951,-132.953574,1.585)); +#130813 = LINE('',#130814,#130815); +#130814 = CARTESIAN_POINT('',(124.904542,-133.108196,1.585)); +#130815 = VECTOR('',#130816,1.); +#130816 = DIRECTION('',(0.972805941447,0.231621674905,0.)); +#130817 = ORIENTED_EDGE('',*,*,#130818,.T.); +#130818 = EDGE_CURVE('',#130811,#130819,#130821,.T.); +#130819 = VERTEX_POINT('',#130820); +#130820 = CARTESIAN_POINT('',(125.159992,-132.848519,1.585)); +#130821 = LINE('',#130822,#130823); +#130822 = CARTESIAN_POINT('',(125.553951,-132.953574,1.585)); +#130823 = VECTOR('',#130824,1.); +#130824 = DIRECTION('',(-0.966235387383,0.257660971374,0.)); +#130825 = ORIENTED_EDGE('',*,*,#130826,.T.); +#130826 = EDGE_CURVE('',#130819,#130827,#130829,.T.); +#130827 = VERTEX_POINT('',#130828); +#130828 = CARTESIAN_POINT('',(125.159992,-132.722909,1.585)); +#130829 = CIRCLE('',#130830,6.499988512274E-02); +#130830 = AXIS2_PLACEMENT_3D('',#130831,#130832,#130833); +#130831 = CARTESIAN_POINT('',(125.17674064295,-132.785714,1.585)); +#130832 = DIRECTION('',(0.,0.,-1.)); +#130833 = DIRECTION('',(-0.257671885533,-0.966232476895,-0.)); +#130834 = ORIENTED_EDGE('',*,*,#130835,.T.); +#130835 = EDGE_CURVE('',#130827,#130836,#130838,.T.); +#130836 = VERTEX_POINT('',#130837); +#130837 = CARTESIAN_POINT('',(125.553951,-132.617852,1.585)); +#130838 = LINE('',#130839,#130840); +#130839 = CARTESIAN_POINT('',(125.159992,-132.722909,1.585)); +#130840 = VECTOR('',#130841,1.); +#130841 = DIRECTION('',(0.966234166155,0.257665550968,0.)); +#130842 = ORIENTED_EDGE('',*,*,#130843,.T.); +#130843 = EDGE_CURVE('',#130836,#130844,#130846,.T.); +#130844 = VERTEX_POINT('',#130845); +#130845 = CARTESIAN_POINT('',(124.904542,-132.463232,1.585)); +#130846 = LINE('',#130847,#130848); +#130847 = CARTESIAN_POINT('',(125.553951,-132.617852,1.585)); +#130848 = VECTOR('',#130849,1.); +#130849 = DIRECTION('',(-0.972806616505,0.231618839659,0.)); +#130850 = ORIENTED_EDGE('',*,*,#130851,.T.); +#130851 = EDGE_CURVE('',#130844,#130852,#130854,.T.); +#130852 = VERTEX_POINT('',#130853); +#130853 = CARTESIAN_POINT('',(124.88149,-132.452658,1.585)); +#130854 = LINE('',#130855,#130856); +#130855 = CARTESIAN_POINT('',(124.904542,-132.463232,1.585)); +#130856 = VECTOR('',#130857,1.); +#130857 = DIRECTION('',(-0.908937835688,0.416931662092,0.)); +#130858 = ORIENTED_EDGE('',*,*,#130859,.T.); +#130859 = EDGE_CURVE('',#130852,#130741,#130860,.T.); +#130860 = LINE('',#130861,#130862); +#130861 = CARTESIAN_POINT('',(124.88149,-132.452658,1.585)); +#130862 = VECTOR('',#130863,1.); +#130863 = DIRECTION('',(-0.524085089139,0.851665908289,0.)); +#130864 = PLANE('',#130865); +#130865 = AXIS2_PLACEMENT_3D('',#130866,#130867,#130868); +#130866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130867 = DIRECTION('',(0.,0.,1.)); +#130868 = DIRECTION('',(1.,0.,-0.)); +#130869 = SHELL_BASED_SURFACE_MODEL('',(#130870)); +#130870 = OPEN_SHELL('',(#130871)); +#130871 = ADVANCED_FACE('',(#130872),#130991,.T.); +#130872 = FACE_BOUND('',#130873,.F.); +#130873 = EDGE_LOOP('',(#130874,#130885,#130893,#130902,#130910,#130918, + #130927,#130935,#130944,#130952,#130960,#130969,#130977,#130985)); +#130874 = ORIENTED_EDGE('',*,*,#130875,.T.); +#130875 = EDGE_CURVE('',#130876,#130878,#130880,.T.); +#130876 = VERTEX_POINT('',#130877); +#130877 = CARTESIAN_POINT('',(148.052559,-131.99984,1.585)); +#130878 = VERTEX_POINT('',#130879); +#130879 = CARTESIAN_POINT('',(148.176532,-132.072191,1.585)); +#130880 = CIRCLE('',#130881,7.49999788012E-02); +#130881 = AXIS2_PLACEMENT_3D('',#130882,#130883,#130884); +#130882 = CARTESIAN_POINT('',(148.10357162542,-132.0548191675,1.585)); +#130883 = DIRECTION('',(0.,0.,-1.)); +#130884 = DIRECTION('',(-0.680168531214,0.733055774922,0.)); +#130885 = ORIENTED_EDGE('',*,*,#130886,.T.); +#130886 = EDGE_CURVE('',#130878,#130887,#130889,.T.); +#130887 = VERTEX_POINT('',#130888); +#130888 = CARTESIAN_POINT('',(147.933646,-133.086091,1.585)); +#130889 = LINE('',#130890,#130891); +#130890 = CARTESIAN_POINT('',(148.176532,-132.072191,1.585)); +#130891 = VECTOR('',#130892,1.); +#130892 = DIRECTION('',(-0.232964820327,-0.972485163121,0.)); +#130893 = ORIENTED_EDGE('',*,*,#130894,.T.); +#130894 = EDGE_CURVE('',#130887,#130895,#130897,.T.); +#130895 = VERTEX_POINT('',#130896); +#130896 = CARTESIAN_POINT('',(147.793008,-133.074144,1.585)); +#130897 = CIRCLE('',#130898,7.500055331745E-02); +#130898 = AXIS2_PLACEMENT_3D('',#130899,#130900,#130901); +#130899 = CARTESIAN_POINT('',(147.86547608181,-133.0548188837,1.585)); +#130900 = DIRECTION('',(-0.,0.,-1.)); +#130901 = DIRECTION('',(0.908925536853,-0.416958473301,-0.)); +#130902 = ORIENTED_EDGE('',*,*,#130903,.T.); +#130903 = EDGE_CURVE('',#130895,#130904,#130906,.T.); +#130904 = VERTEX_POINT('',#130905); +#130905 = CARTESIAN_POINT('',(147.674999,-132.631613,1.585)); +#130906 = LINE('',#130907,#130908); +#130907 = CARTESIAN_POINT('',(147.793008,-133.074144,1.585)); +#130908 = VECTOR('',#130909,1.); +#130909 = DIRECTION('',(-0.257664145438,0.966234540966,0.)); +#130910 = ORIENTED_EDGE('',*,*,#130911,.T.); +#130911 = EDGE_CURVE('',#130904,#130912,#130914,.T.); +#130912 = VERTEX_POINT('',#130913); +#130913 = CARTESIAN_POINT('',(147.551829,-133.08791,1.585)); +#130914 = LINE('',#130915,#130916); +#130915 = CARTESIAN_POINT('',(147.674999,-132.631613,1.585)); +#130916 = VECTOR('',#130917,1.); +#130917 = DIRECTION('',(-0.260606315218,-0.965445155598,0.)); +#130918 = ORIENTED_EDGE('',*,*,#130919,.T.); +#130919 = EDGE_CURVE('',#130912,#130920,#130922,.T.); +#130920 = VERTEX_POINT('',#130921); +#130921 = CARTESIAN_POINT('',(147.411564,-133.072191,1.585)); +#130922 = CIRCLE('',#130923,7.499976850751E-02); +#130923 = AXIS2_PLACEMENT_3D('',#130924,#130925,#130926); +#130924 = CARTESIAN_POINT('',(147.48452410899,-133.05481896,1.585)); +#130925 = DIRECTION('',(-0.,0.,-1.)); +#130926 = DIRECTION('',(0.897401316583,-0.441215227519,-0.)); +#130927 = ORIENTED_EDGE('',*,*,#130928,.T.); +#130928 = EDGE_CURVE('',#130920,#130929,#130931,.T.); +#130929 = VERTEX_POINT('',#130930); +#130930 = CARTESIAN_POINT('',(147.171481,-132.057623,1.585)); +#130931 = LINE('',#130932,#130933); +#130932 = CARTESIAN_POINT('',(147.411564,-133.072191,1.585)); +#130933 = VECTOR('',#130934,1.); +#130934 = DIRECTION('',(-0.23027618176,0.97312531573,0.)); +#130935 = ORIENTED_EDGE('',*,*,#130936,.T.); +#130936 = EDGE_CURVE('',#130929,#130937,#130939,.T.); +#130937 = VERTEX_POINT('',#130938); +#130938 = CARTESIAN_POINT('',(147.319389,-132.037447,1.585)); +#130939 = CIRCLE('',#130940,7.499999556138E-02); +#130940 = AXIS2_PLACEMENT_3D('',#130941,#130942,#130943); +#130941 = CARTESIAN_POINT('',(147.2464285449,-132.0548185666,1.585)); +#130942 = DIRECTION('',(0.,0.,-1.)); +#130943 = DIRECTION('',(-0.999300657904,-3.739244726435E-02,-0.)); +#130944 = ORIENTED_EDGE('',*,*,#130945,.T.); +#130945 = EDGE_CURVE('',#130937,#130946,#130948,.T.); +#130946 = VERTEX_POINT('',#130947); +#130947 = CARTESIAN_POINT('',(147.48864,-132.748303,1.585)); +#130948 = LINE('',#130949,#130950); +#130949 = CARTESIAN_POINT('',(147.319389,-132.037447,1.585)); +#130950 = VECTOR('',#130951,1.); +#130951 = DIRECTION('',(0.231619972271,-0.972806346836,0.)); +#130952 = ORIENTED_EDGE('',*,*,#130953,.T.); +#130953 = EDGE_CURVE('',#130946,#130954,#130956,.T.); +#130954 = VERTEX_POINT('',#130955); +#130955 = CARTESIAN_POINT('',(147.607695,-132.307441,1.585)); +#130956 = LINE('',#130957,#130958); +#130957 = CARTESIAN_POINT('',(147.48864,-132.748303,1.585)); +#130958 = VECTOR('',#130959,1.); +#130959 = DIRECTION('',(0.260711285702,0.96541681439,0.)); +#130960 = ORIENTED_EDGE('',*,*,#130961,.T.); +#130961 = EDGE_CURVE('',#130954,#130962,#130964,.T.); +#130962 = VERTEX_POINT('',#130963); +#130963 = CARTESIAN_POINT('',(147.747468,-132.321208,1.585)); +#130964 = CIRCLE('',#130965,7.500013992439E-02); +#130965 = AXIS2_PLACEMENT_3D('',#130966,#130967,#130968); +#130966 = CARTESIAN_POINT('',(147.67500014547,-132.3405323641,1.585)); +#130967 = DIRECTION('',(0.,0.,-1.)); +#130968 = DIRECTION('',(-0.897400265457,0.44121736543,0.)); +#130969 = ORIENTED_EDGE('',*,*,#130970,.T.); +#130970 = EDGE_CURVE('',#130962,#130971,#130973,.T.); +#130971 = VERTEX_POINT('',#130972); +#130972 = CARTESIAN_POINT('',(147.861359,-132.748303,1.585)); +#130973 = LINE('',#130974,#130975); +#130974 = CARTESIAN_POINT('',(147.747468,-132.321208,1.585)); +#130975 = VECTOR('',#130976,1.); +#130976 = DIRECTION('',(0.257660538414,-0.966235502838,0.)); +#130977 = ORIENTED_EDGE('',*,*,#130978,.T.); +#130978 = EDGE_CURVE('',#130971,#130979,#130981,.T.); +#130979 = VERTEX_POINT('',#130980); +#130980 = CARTESIAN_POINT('',(148.035402,-132.023547,1.585)); +#130981 = LINE('',#130982,#130983); +#130982 = CARTESIAN_POINT('',(147.861359,-132.748303,1.585)); +#130983 = VECTOR('',#130984,1.); +#130984 = DIRECTION('',(0.233501785734,0.972356372972,0.)); +#130985 = ORIENTED_EDGE('',*,*,#130986,.T.); +#130986 = EDGE_CURVE('',#130979,#130876,#130987,.T.); +#130987 = LINE('',#130988,#130989); +#130988 = CARTESIAN_POINT('',(148.035402,-132.023547,1.585)); +#130989 = VECTOR('',#130990,1.); +#130990 = DIRECTION('',(0.586282529115,0.810106657209,0.)); +#130991 = PLANE('',#130992); +#130992 = AXIS2_PLACEMENT_3D('',#130993,#130994,#130995); +#130993 = CARTESIAN_POINT('',(0.,0.,1.585)); +#130994 = DIRECTION('',(0.,0.,1.)); +#130995 = DIRECTION('',(1.,0.,-0.)); +#130996 = SHELL_BASED_SURFACE_MODEL('',(#130997)); +#130997 = OPEN_SHELL('',(#130998)); +#130998 = ADVANCED_FACE('',(#130999),#131247,.T.); +#130999 = FACE_BOUND('',#131000,.F.); +#131000 = EDGE_LOOP('',(#131001,#131011,#131019,#131027,#131035,#131044, + #131052,#131060,#131068,#131076,#131085,#131093,#131101,#131109, + #131118,#131126,#131134,#131142,#131151,#131159,#131168,#131176, + #131184,#131192,#131201,#131209,#131217,#131225,#131233,#131241)); +#131001 = ORIENTED_EDGE('',*,*,#131002,.T.); +#131002 = EDGE_CURVE('',#131003,#131005,#131007,.T.); +#131003 = VERTEX_POINT('',#131004); +#131004 = CARTESIAN_POINT('',(149.426772,-132.150392,1.585)); +#131005 = VERTEX_POINT('',#131006); +#131006 = CARTESIAN_POINT('',(149.542619,-132.037281,1.585)); +#131007 = LINE('',#131008,#131009); +#131008 = CARTESIAN_POINT('',(149.426772,-132.150392,1.585)); +#131009 = VECTOR('',#131010,1.); +#131010 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#131011 = ORIENTED_EDGE('',*,*,#131012,.T.); +#131012 = EDGE_CURVE('',#131005,#131013,#131015,.T.); +#131013 = VERTEX_POINT('',#131014); +#131014 = CARTESIAN_POINT('',(149.715212,-131.980548,1.585)); +#131015 = LINE('',#131016,#131017); +#131016 = CARTESIAN_POINT('',(149.542619,-132.037281,1.585)); +#131017 = VECTOR('',#131018,1.); +#131018 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#131019 = ORIENTED_EDGE('',*,*,#131020,.T.); +#131020 = EDGE_CURVE('',#131013,#131021,#131023,.T.); +#131021 = VERTEX_POINT('',#131022); +#131022 = CARTESIAN_POINT('',(149.880108,-131.98126,1.585)); +#131023 = LINE('',#131024,#131025); +#131024 = CARTESIAN_POINT('',(149.715212,-131.980548,1.585)); +#131025 = VECTOR('',#131026,1.); +#131026 = DIRECTION('',(0.999990678116,-4.317832832887E-03,0.)); +#131027 = ORIENTED_EDGE('',*,*,#131028,.T.); +#131028 = EDGE_CURVE('',#131021,#131029,#131031,.T.); +#131029 = VERTEX_POINT('',#131030); +#131030 = CARTESIAN_POINT('',(150.006698,-132.043188,1.585)); +#131031 = LINE('',#131032,#131033); +#131032 = CARTESIAN_POINT('',(149.880108,-131.98126,1.585)); +#131033 = VECTOR('',#131034,1.); +#131034 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#131035 = ORIENTED_EDGE('',*,*,#131036,.T.); +#131036 = EDGE_CURVE('',#131029,#131037,#131039,.T.); +#131037 = VERTEX_POINT('',#131038); +#131038 = CARTESIAN_POINT('',(149.927173,-132.16952,1.585)); +#131039 = CIRCLE('',#131040,7.500029440362E-02); +#131040 = AXIS2_PLACEMENT_3D('',#131041,#131042,#131043); +#131041 = CARTESIAN_POINT('',(149.96071405397,-132.1024376486,1.585)); +#131042 = DIRECTION('',(0.,0.,-1.)); +#131043 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#131044 = ORIENTED_EDGE('',*,*,#131045,.T.); +#131045 = EDGE_CURVE('',#131037,#131046,#131048,.T.); +#131046 = VERTEX_POINT('',#131047); +#131047 = CARTESIAN_POINT('',(149.847771,-132.129819,1.585)); +#131048 = LINE('',#131049,#131050); +#131049 = CARTESIAN_POINT('',(149.927173,-132.16952,1.585)); +#131050 = VECTOR('',#131051,1.); +#131051 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#131052 = ORIENTED_EDGE('',*,*,#131053,.T.); +#131053 = EDGE_CURVE('',#131046,#131054,#131056,.T.); +#131054 = VERTEX_POINT('',#131055); +#131055 = CARTESIAN_POINT('',(149.734789,-132.129819,1.585)); +#131056 = LINE('',#131057,#131058); +#131057 = CARTESIAN_POINT('',(149.847771,-132.129819,1.585)); +#131058 = VECTOR('',#131059,1.); +#131059 = DIRECTION('',(-1.,0.,0.)); +#131060 = ORIENTED_EDGE('',*,*,#131061,.T.); +#131061 = EDGE_CURVE('',#131054,#131062,#131064,.T.); +#131062 = VERTEX_POINT('',#131063); +#131063 = CARTESIAN_POINT('',(149.620276,-132.16799,1.585)); +#131064 = LINE('',#131065,#131066); +#131065 = CARTESIAN_POINT('',(149.734789,-132.129819,1.585)); +#131066 = VECTOR('',#131067,1.); +#131067 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#131068 = ORIENTED_EDGE('',*,*,#131069,.T.); +#131069 = EDGE_CURVE('',#131062,#131070,#131072,.T.); +#131070 = VERTEX_POINT('',#131071); +#131071 = CARTESIAN_POINT('',(149.546163,-132.242103,1.585)); +#131072 = LINE('',#131073,#131074); +#131073 = CARTESIAN_POINT('',(149.620276,-132.16799,1.585)); +#131074 = VECTOR('',#131075,1.); +#131075 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#131076 = ORIENTED_EDGE('',*,*,#131077,.T.); +#131077 = EDGE_CURVE('',#131070,#131078,#131080,.T.); +#131078 = VERTEX_POINT('',#131079); +#131079 = CARTESIAN_POINT('',(149.464286,-132.617013,1.585)); +#131080 = CIRCLE('',#131081,0.611712714363); +#131081 = AXIS2_PLACEMENT_3D('',#131082,#131083,#131084); +#131082 = CARTESIAN_POINT('',(150.07269127521,-132.5534876822,1.585)); +#131083 = DIRECTION('',(0.,0.,1.)); +#131084 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#131085 = ORIENTED_EDGE('',*,*,#131086,.T.); +#131086 = EDGE_CURVE('',#131078,#131087,#131089,.T.); +#131087 = VERTEX_POINT('',#131088); +#131088 = CARTESIAN_POINT('',(149.507669,-132.790547,1.585)); +#131089 = LINE('',#131090,#131091); +#131090 = CARTESIAN_POINT('',(149.464286,-132.617013,1.585)); +#131091 = VECTOR('',#131092,1.); +#131092 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#131093 = ORIENTED_EDGE('',*,*,#131094,.T.); +#131094 = EDGE_CURVE('',#131087,#131095,#131097,.T.); +#131095 = VERTEX_POINT('',#131096); +#131096 = CARTESIAN_POINT('',(149.546163,-132.867534,1.585)); +#131097 = LINE('',#131098,#131099); +#131098 = CARTESIAN_POINT('',(149.507669,-132.790547,1.585)); +#131099 = VECTOR('',#131100,1.); +#131100 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#131101 = ORIENTED_EDGE('',*,*,#131102,.T.); +#131102 = EDGE_CURVE('',#131095,#131103,#131105,.T.); +#131103 = VERTEX_POINT('',#131104); +#131104 = CARTESIAN_POINT('',(149.620276,-132.941648,1.585)); +#131105 = LINE('',#131106,#131107); +#131106 = CARTESIAN_POINT('',(149.546163,-132.867534,1.585)); +#131107 = VECTOR('',#131108,1.); +#131108 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#131109 = ORIENTED_EDGE('',*,*,#131110,.T.); +#131110 = EDGE_CURVE('',#131103,#131111,#131113,.T.); +#131111 = VERTEX_POINT('',#131112); +#131112 = CARTESIAN_POINT('',(149.9202,-132.941647,1.585)); +#131113 = CIRCLE('',#131114,0.299305962385); +#131114 = AXIS2_PLACEMENT_3D('',#131115,#131116,#131117); +#131115 = CARTESIAN_POINT('',(149.77023713635,-132.6826195909,1.585)); +#131116 = DIRECTION('',(0.,0.,1.)); +#131117 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#131118 = ORIENTED_EDGE('',*,*,#131119,.T.); +#131119 = EDGE_CURVE('',#131111,#131120,#131122,.T.); +#131120 = VERTEX_POINT('',#131121); +#131121 = CARTESIAN_POINT('',(149.933333,-132.928514,1.585)); +#131122 = LINE('',#131123,#131124); +#131123 = CARTESIAN_POINT('',(149.9202,-132.941647,1.585)); +#131124 = VECTOR('',#131125,1.); +#131125 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#131126 = ORIENTED_EDGE('',*,*,#131127,.T.); +#131127 = EDGE_CURVE('',#131120,#131128,#131130,.T.); +#131128 = VERTEX_POINT('',#131129); +#131129 = CARTESIAN_POINT('',(149.933333,-132.701247,1.585)); +#131130 = LINE('',#131131,#131132); +#131131 = CARTESIAN_POINT('',(149.933333,-132.928514,1.585)); +#131132 = VECTOR('',#131133,1.); +#131133 = DIRECTION('',(0.,1.,0.)); +#131134 = ORIENTED_EDGE('',*,*,#131135,.T.); +#131135 = EDGE_CURVE('',#131128,#131136,#131138,.T.); +#131136 = VERTEX_POINT('',#131137); +#131137 = CARTESIAN_POINT('',(149.803225,-132.699806,1.585)); +#131138 = LINE('',#131139,#131140); +#131139 = CARTESIAN_POINT('',(149.933333,-132.701247,1.585)); +#131140 = VECTOR('',#131141,1.); +#131141 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#131142 = ORIENTED_EDGE('',*,*,#131143,.T.); +#131143 = EDGE_CURVE('',#131136,#131144,#131146,.T.); +#131144 = VERTEX_POINT('',#131145); +#131145 = CARTESIAN_POINT('',(149.817857,-132.551247,1.585)); +#131146 = CIRCLE('',#131147,7.500006711463E-02); +#131147 = AXIS2_PLACEMENT_3D('',#131148,#131149,#131150); +#131148 = CARTESIAN_POINT('',(149.81785693288,-132.6262470671,1.585)); +#131149 = DIRECTION('',(0.,0.,-1.)); +#131150 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#131151 = ORIENTED_EDGE('',*,*,#131152,.T.); +#131152 = EDGE_CURVE('',#131144,#131153,#131155,.T.); +#131153 = VERTEX_POINT('',#131154); +#131154 = CARTESIAN_POINT('',(150.022965,-132.552688,1.585)); +#131155 = LINE('',#131156,#131157); +#131156 = CARTESIAN_POINT('',(149.817857,-132.551247,1.585)); +#131157 = VECTOR('',#131158,1.); +#131158 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#131159 = ORIENTED_EDGE('',*,*,#131160,.T.); +#131160 = EDGE_CURVE('',#131153,#131161,#131163,.T.); +#131161 = VERTEX_POINT('',#131162); +#131162 = CARTESIAN_POINT('',(150.083333,-132.626247,1.585)); +#131163 = CIRCLE('',#131164,7.500074938985E-02); +#131164 = AXIS2_PLACEMENT_3D('',#131165,#131166,#131167); +#131165 = CARTESIAN_POINT('',(150.00833225061,-132.6262474661,1.585)); +#131166 = DIRECTION('',(0.,0.,-1.)); +#131167 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#131168 = ORIENTED_EDGE('',*,*,#131169,.T.); +#131169 = EDGE_CURVE('',#131161,#131170,#131172,.T.); +#131170 = VERTEX_POINT('',#131171); +#131171 = CARTESIAN_POINT('',(150.081892,-132.974212,1.585)); +#131172 = LINE('',#131173,#131174); +#131173 = CARTESIAN_POINT('',(150.083333,-132.626247,1.585)); +#131174 = VECTOR('',#131175,1.); +#131175 = DIRECTION('',(-4.141185589905E-03,-0.999991425254,0.)); +#131176 = ORIENTED_EDGE('',*,*,#131177,.T.); +#131177 = EDGE_CURVE('',#131170,#131178,#131180,.T.); +#131178 = VERTEX_POINT('',#131179); +#131179 = CARTESIAN_POINT('',(150.061366,-133.012613,1.585)); +#131180 = LINE('',#131181,#131182); +#131181 = CARTESIAN_POINT('',(150.081892,-132.974212,1.585)); +#131182 = VECTOR('',#131183,1.); +#131183 = DIRECTION('',(-0.471400985779,-0.881918993222,0.)); +#131184 = ORIENTED_EDGE('',*,*,#131185,.T.); +#131185 = EDGE_CURVE('',#131178,#131186,#131188,.T.); +#131186 = VERTEX_POINT('',#131187); +#131187 = CARTESIAN_POINT('',(149.997856,-133.072357,1.585)); +#131188 = LINE('',#131189,#131190); +#131189 = CARTESIAN_POINT('',(150.061366,-133.012613,1.585)); +#131190 = VECTOR('',#131191,1.); +#131191 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#131192 = ORIENTED_EDGE('',*,*,#131193,.T.); +#131193 = EDGE_CURVE('',#131186,#131194,#131196,.T.); +#131194 = VERTEX_POINT('',#131195); +#131195 = CARTESIAN_POINT('',(149.538094,-133.069561,1.585)); +#131196 = CIRCLE('',#131197,0.461067828848); +#131197 = AXIS2_PLACEMENT_3D('',#131198,#131199,#131200); +#131198 = CARTESIAN_POINT('',(149.77040551268,-132.6712961335,1.585)); +#131199 = DIRECTION('',(-0.,0.,-1.)); +#131200 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#131201 = ORIENTED_EDGE('',*,*,#131202,.T.); +#131202 = EDGE_CURVE('',#131194,#131203,#131205,.T.); +#131203 = VERTEX_POINT('',#131204); +#131204 = CARTESIAN_POINT('',(149.421405,-132.951798,1.585)); +#131205 = LINE('',#131206,#131207); +#131206 = CARTESIAN_POINT('',(149.538094,-133.069561,1.585)); +#131207 = VECTOR('',#131208,1.); +#131208 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#131209 = ORIENTED_EDGE('',*,*,#131210,.T.); +#131210 = EDGE_CURVE('',#131203,#131211,#131213,.T.); +#131211 = VERTEX_POINT('',#131212); +#131212 = CARTESIAN_POINT('',(149.364144,-132.834913,1.585)); +#131213 = LINE('',#131214,#131215); +#131214 = CARTESIAN_POINT('',(149.421405,-132.951798,1.585)); +#131215 = VECTOR('',#131216,1.); +#131216 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#131217 = ORIENTED_EDGE('',*,*,#131218,.T.); +#131218 = EDGE_CURVE('',#131211,#131219,#131221,.T.); +#131219 = VERTEX_POINT('',#131220); +#131220 = CARTESIAN_POINT('',(149.314286,-132.626247,1.585)); +#131221 = LINE('',#131222,#131223); +#131222 = CARTESIAN_POINT('',(149.364144,-132.834913,1.585)); +#131223 = VECTOR('',#131224,1.); +#131224 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#131225 = ORIENTED_EDGE('',*,*,#131226,.T.); +#131226 = EDGE_CURVE('',#131219,#131227,#131229,.T.); +#131227 = VERTEX_POINT('',#131228); +#131228 = CARTESIAN_POINT('',(149.316525,-132.4652,1.585)); +#131229 = LINE('',#131230,#131231); +#131230 = CARTESIAN_POINT('',(149.314286,-132.626247,1.585)); +#131231 = VECTOR('',#131232,1.); +#131232 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#131233 = ORIENTED_EDGE('',*,*,#131234,.T.); +#131234 = EDGE_CURVE('',#131227,#131235,#131237,.T.); +#131235 = VERTEX_POINT('',#131236); +#131236 = CARTESIAN_POINT('',(149.369823,-132.259373,1.585)); +#131237 = LINE('',#131238,#131239); +#131238 = CARTESIAN_POINT('',(149.316525,-132.4652,1.585)); +#131239 = VECTOR('',#131240,1.); +#131240 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#131241 = ORIENTED_EDGE('',*,*,#131242,.T.); +#131242 = EDGE_CURVE('',#131235,#131003,#131243,.T.); +#131243 = LINE('',#131244,#131245); +#131244 = CARTESIAN_POINT('',(149.369823,-132.259373,1.585)); +#131245 = VECTOR('',#131246,1.); +#131246 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#131247 = PLANE('',#131248); +#131248 = AXIS2_PLACEMENT_3D('',#131249,#131250,#131251); +#131249 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131250 = DIRECTION('',(0.,0.,1.)); +#131251 = DIRECTION('',(1.,0.,-0.)); +#131252 = SHELL_BASED_SURFACE_MODEL('',(#131253)); +#131253 = OPEN_SHELL('',(#131254)); +#131254 = ADVANCED_FACE('',(#131255),#131519,.T.); +#131255 = FACE_BOUND('',#131256,.F.); +#131256 = EDGE_LOOP('',(#131257,#131267,#131275,#131283,#131292,#131300, + #131308,#131317,#131325,#131333,#131341,#131349,#131357,#131365, + #131373,#131382,#131390,#131398,#131406,#131414,#131423,#131431, + #131439,#131448,#131456,#131464,#131472,#131480,#131488,#131496, + #131504,#131513)); +#131257 = ORIENTED_EDGE('',*,*,#131258,.T.); +#131258 = EDGE_CURVE('',#131259,#131261,#131263,.T.); +#131259 = VERTEX_POINT('',#131260); +#131260 = CARTESIAN_POINT('',(146.397064,-132.03932,1.585)); +#131261 = VERTEX_POINT('',#131262); +#131262 = CARTESIAN_POINT('',(146.517511,-131.98126,1.585)); +#131263 = LINE('',#131264,#131265); +#131264 = CARTESIAN_POINT('',(146.397064,-132.03932,1.585)); +#131265 = VECTOR('',#131266,1.); +#131266 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#131267 = ORIENTED_EDGE('',*,*,#131268,.T.); +#131268 = EDGE_CURVE('',#131261,#131269,#131271,.T.); +#131269 = VERTEX_POINT('',#131270); +#131270 = CARTESIAN_POINT('',(146.777643,-131.980548,1.585)); +#131271 = LINE('',#131272,#131273); +#131272 = CARTESIAN_POINT('',(146.517511,-131.98126,1.585)); +#131273 = VECTOR('',#131274,1.); +#131274 = DIRECTION('',(0.99999625424,2.737061695645E-03,0.)); +#131275 = ORIENTED_EDGE('',*,*,#131276,.T.); +#131276 = EDGE_CURVE('',#131269,#131277,#131279,.T.); +#131277 = VERTEX_POINT('',#131278); +#131278 = CARTESIAN_POINT('',(146.950237,-132.037281,1.585)); +#131279 = LINE('',#131280,#131281); +#131280 = CARTESIAN_POINT('',(146.777643,-131.980548,1.585)); +#131281 = VECTOR('',#131282,1.); +#131282 = DIRECTION('',(0.949993312755,-0.312270244693,0.)); +#131283 = ORIENTED_EDGE('',*,*,#131284,.T.); +#131284 = EDGE_CURVE('',#131277,#131285,#131287,.T.); +#131285 = VERTEX_POINT('',#131286); +#131286 = CARTESIAN_POINT('',(146.889377,-132.173589,1.585)); +#131287 = CIRCLE('',#131288,7.499990197503E-02); +#131288 = AXIS2_PLACEMENT_3D('',#131289,#131290,#131291); +#131289 = CARTESIAN_POINT('',(146.91309495478,-132.1024381467,1.585)); +#131290 = DIRECTION('',(0.,0.,-1.)); +#131291 = DIRECTION('',(0.495227916747,0.868763092261,0.)); +#131292 = ORIENTED_EDGE('',*,*,#131293,.T.); +#131293 = EDGE_CURVE('',#131285,#131294,#131296,.T.); +#131294 = VERTEX_POINT('',#131295); +#131295 = CARTESIAN_POINT('',(146.758068,-132.129819,1.585)); +#131296 = LINE('',#131297,#131298); +#131297 = CARTESIAN_POINT('',(146.889377,-132.173589,1.585)); +#131298 = VECTOR('',#131299,1.); +#131299 = DIRECTION('',(-0.948682575567,0.316229933459,0.)); +#131300 = ORIENTED_EDGE('',*,*,#131301,.T.); +#131301 = EDGE_CURVE('',#131294,#131302,#131304,.T.); +#131302 = VERTEX_POINT('',#131303); +#131303 = CARTESIAN_POINT('',(146.549848,-132.129819,1.585)); +#131304 = LINE('',#131305,#131306); +#131305 = CARTESIAN_POINT('',(146.758068,-132.129819,1.585)); +#131306 = VECTOR('',#131307,1.); +#131307 = DIRECTION('',(-1.,0.,0.)); +#131308 = ORIENTED_EDGE('',*,*,#131309,.T.); +#131309 = EDGE_CURVE('',#131302,#131310,#131312,.T.); +#131310 = VERTEX_POINT('',#131311); +#131311 = CARTESIAN_POINT('',(146.416667,-132.263,1.585)); +#131312 = CIRCLE('',#131313,0.18686440374); +#131313 = AXIS2_PLACEMENT_3D('',#131314,#131315,#131316); +#131314 = CARTESIAN_POINT('',(146.597384,-132.310536,1.585)); +#131315 = DIRECTION('',(0.,0.,1.)); +#131316 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#131317 = ORIENTED_EDGE('',*,*,#131318,.T.); +#131318 = EDGE_CURVE('',#131310,#131319,#131321,.T.); +#131319 = VERTEX_POINT('',#131320); +#131320 = CARTESIAN_POINT('',(146.416667,-132.322828,1.585)); +#131321 = LINE('',#131322,#131323); +#131322 = CARTESIAN_POINT('',(146.416667,-132.263,1.585)); +#131323 = VECTOR('',#131324,1.); +#131324 = DIRECTION('',(0.,-1.,0.)); +#131325 = ORIENTED_EDGE('',*,*,#131326,.T.); +#131326 = EDGE_CURVE('',#131319,#131327,#131329,.T.); +#131327 = VERTEX_POINT('',#131328); +#131328 = CARTESIAN_POINT('',(146.450925,-132.391344,1.585)); +#131329 = LINE('',#131330,#131331); +#131330 = CARTESIAN_POINT('',(146.416667,-132.322828,1.585)); +#131331 = VECTOR('',#131332,1.); +#131332 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#131333 = ORIENTED_EDGE('',*,*,#131334,.T.); +#131334 = EDGE_CURVE('',#131327,#131335,#131337,.T.); +#131335 = VERTEX_POINT('',#131336); +#131336 = CARTESIAN_POINT('',(146.481332,-132.421751,1.585)); +#131337 = LINE('',#131338,#131339); +#131338 = CARTESIAN_POINT('',(146.450925,-132.391344,1.585)); +#131339 = VECTOR('',#131340,1.); +#131340 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#131341 = ORIENTED_EDGE('',*,*,#131342,.T.); +#131342 = EDGE_CURVE('',#131335,#131343,#131345,.T.); +#131343 = VERTEX_POINT('',#131344); +#131344 = CARTESIAN_POINT('',(146.558319,-132.460244,1.585)); +#131345 = LINE('',#131346,#131347); +#131346 = CARTESIAN_POINT('',(146.481332,-132.421751,1.585)); +#131347 = VECTOR('',#131348,1.); +#131348 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#131349 = ORIENTED_EDGE('',*,*,#131350,.T.); +#131350 = EDGE_CURVE('',#131343,#131351,#131353,.T.); +#131351 = VERTEX_POINT('',#131352); +#131352 = CARTESIAN_POINT('',(146.75616,-132.511546,1.585)); +#131353 = LINE('',#131354,#131355); +#131354 = CARTESIAN_POINT('',(146.558319,-132.460244,1.585)); +#131355 = VECTOR('',#131356,1.); +#131356 = DIRECTION('',(0.967985143201,-0.251007494991,0.)); +#131357 = ORIENTED_EDGE('',*,*,#131358,.T.); +#131358 = EDGE_CURVE('',#131351,#131359,#131361,.T.); +#131359 = VERTEX_POINT('',#131360); +#131360 = CARTESIAN_POINT('',(146.86514,-132.568495,1.585)); +#131361 = LINE('',#131362,#131363); +#131362 = CARTESIAN_POINT('',(146.75616,-132.511546,1.585)); +#131363 = VECTOR('',#131364,1.); +#131364 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#131365 = ORIENTED_EDGE('',*,*,#131366,.T.); +#131366 = EDGE_CURVE('',#131359,#131367,#131369,.T.); +#131367 = VERTEX_POINT('',#131368); +#131368 = CARTESIAN_POINT('',(146.928593,-132.634025,1.585)); +#131369 = LINE('',#131370,#131371); +#131370 = CARTESIAN_POINT('',(146.86514,-132.568495,1.585)); +#131371 = VECTOR('',#131372,1.); +#131372 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#131373 = ORIENTED_EDGE('',*,*,#131374,.T.); +#131374 = EDGE_CURVE('',#131367,#131375,#131377,.T.); +#131375 = VERTEX_POINT('',#131376); +#131376 = CARTESIAN_POINT('',(146.923227,-133.006863,1.585)); +#131377 = CIRCLE('',#131378,0.290999251663); +#131378 = AXIS2_PLACEMENT_3D('',#131379,#131380,#131381); +#131379 = CARTESIAN_POINT('',(146.7025023369,-132.8172286477,1.585)); +#131380 = DIRECTION('',(0.,0.,-1.)); +#131381 = DIRECTION('',(0.776945857418,0.629567418662,0.)); +#131382 = ORIENTED_EDGE('',*,*,#131383,.T.); +#131383 = EDGE_CURVE('',#131375,#131384,#131386,.T.); +#131384 = VERTEX_POINT('',#131385); +#131385 = CARTESIAN_POINT('',(146.857697,-133.070317,1.585)); +#131386 = LINE('',#131387,#131388); +#131387 = CARTESIAN_POINT('',(146.923227,-133.006863,1.585)); +#131388 = VECTOR('',#131389,1.); +#131389 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#131390 = ORIENTED_EDGE('',*,*,#131391,.T.); +#131391 = EDGE_CURVE('',#131384,#131392,#131394,.T.); +#131392 = VERTEX_POINT('',#131393); +#131393 = CARTESIAN_POINT('',(146.737251,-133.128378,1.585)); +#131394 = LINE('',#131395,#131396); +#131395 = CARTESIAN_POINT('',(146.857697,-133.070317,1.585)); +#131396 = VECTOR('',#131397,1.); +#131397 = DIRECTION('',(-0.900801384651,-0.434231350101,0.)); +#131398 = ORIENTED_EDGE('',*,*,#131399,.T.); +#131399 = EDGE_CURVE('',#131392,#131400,#131402,.T.); +#131400 = VERTEX_POINT('',#131401); +#131401 = CARTESIAN_POINT('',(146.468061,-133.127619,1.585)); +#131402 = LINE('',#131403,#131404); +#131403 = CARTESIAN_POINT('',(146.737251,-133.128378,1.585)); +#131404 = VECTOR('',#131405,1.); +#131405 = DIRECTION('',(-0.999996025037,2.819558612842E-03,0.)); +#131406 = ORIENTED_EDGE('',*,*,#131407,.T.); +#131407 = EDGE_CURVE('',#131400,#131408,#131410,.T.); +#131408 = VERTEX_POINT('',#131409); +#131409 = CARTESIAN_POINT('',(146.304524,-133.072357,1.585)); +#131410 = LINE('',#131411,#131412); +#131411 = CARTESIAN_POINT('',(146.468061,-133.127619,1.585)); +#131412 = VECTOR('',#131413,1.); +#131413 = DIRECTION('',(-0.94737239725,0.320133629801,0.)); +#131414 = ORIENTED_EDGE('',*,*,#131415,.T.); +#131415 = EDGE_CURVE('',#131408,#131416,#131418,.T.); +#131416 = VERTEX_POINT('',#131417); +#131417 = CARTESIAN_POINT('',(146.365384,-132.936049,1.585)); +#131418 = CIRCLE('',#131419,7.500001519552E-02); +#131419 = AXIS2_PLACEMENT_3D('',#131420,#131421,#131422); +#131420 = CARTESIAN_POINT('',(146.34166709996,-133.0072003241,1.585)); +#131421 = DIRECTION('',(0.,0.,-1.)); +#131422 = DIRECTION('',(-0.4952412325,-0.868755501641,-0.)); +#131423 = ORIENTED_EDGE('',*,*,#131424,.T.); +#131424 = EDGE_CURVE('',#131416,#131425,#131427,.T.); +#131425 = VERTEX_POINT('',#131426); +#131426 = CARTESIAN_POINT('',(146.496694,-132.979819,1.585)); +#131427 = LINE('',#131428,#131429); +#131428 = CARTESIAN_POINT('',(146.365384,-132.936049,1.585)); +#131429 = VECTOR('',#131430,1.); +#131430 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#131431 = ORIENTED_EDGE('',*,*,#131432,.T.); +#131432 = EDGE_CURVE('',#131425,#131433,#131435,.T.); +#131433 = VERTEX_POINT('',#131434); +#131434 = CARTESIAN_POINT('',(146.704914,-132.979819,1.585)); +#131435 = LINE('',#131436,#131437); +#131436 = CARTESIAN_POINT('',(146.496694,-132.979819,1.585)); +#131437 = VECTOR('',#131438,1.); +#131438 = DIRECTION('',(1.,0.,0.)); +#131439 = ORIENTED_EDGE('',*,*,#131440,.T.); +#131440 = EDGE_CURVE('',#131433,#131441,#131443,.T.); +#131441 = VERTEX_POINT('',#131442); +#131442 = CARTESIAN_POINT('',(146.838095,-132.846637,1.585)); +#131443 = CIRCLE('',#131444,0.186867760544); +#131444 = AXIS2_PLACEMENT_3D('',#131445,#131446,#131447); +#131445 = CARTESIAN_POINT('',(146.65737496928,-132.7990993262,1.585)); +#131446 = DIRECTION('',(0.,0.,1.)); +#131447 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#131448 = ORIENTED_EDGE('',*,*,#131449,.T.); +#131449 = EDGE_CURVE('',#131441,#131450,#131452,.T.); +#131450 = VERTEX_POINT('',#131451); +#131451 = CARTESIAN_POINT('',(146.838095,-132.786809,1.585)); +#131452 = LINE('',#131453,#131454); +#131453 = CARTESIAN_POINT('',(146.838095,-132.846637,1.585)); +#131454 = VECTOR('',#131455,1.); +#131455 = DIRECTION('',(0.,1.,0.)); +#131456 = ORIENTED_EDGE('',*,*,#131457,.T.); +#131457 = EDGE_CURVE('',#131450,#131458,#131460,.T.); +#131458 = VERTEX_POINT('',#131459); +#131459 = CARTESIAN_POINT('',(146.803837,-132.718293,1.585)); +#131460 = LINE('',#131461,#131462); +#131461 = CARTESIAN_POINT('',(146.838095,-132.786809,1.585)); +#131462 = VECTOR('',#131463,1.); +#131463 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#131464 = ORIENTED_EDGE('',*,*,#131465,.T.); +#131465 = EDGE_CURVE('',#131458,#131466,#131468,.T.); +#131466 = VERTEX_POINT('',#131467); +#131467 = CARTESIAN_POINT('',(146.77343,-132.687886,1.585)); +#131468 = LINE('',#131469,#131470); +#131469 = CARTESIAN_POINT('',(146.803837,-132.718293,1.585)); +#131470 = VECTOR('',#131471,1.); +#131471 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#131472 = ORIENTED_EDGE('',*,*,#131473,.T.); +#131473 = EDGE_CURVE('',#131466,#131474,#131476,.T.); +#131474 = VERTEX_POINT('',#131475); +#131475 = CARTESIAN_POINT('',(146.696443,-132.649392,1.585)); +#131476 = LINE('',#131477,#131478); +#131477 = CARTESIAN_POINT('',(146.77343,-132.687886,1.585)); +#131478 = VECTOR('',#131479,1.); +#131479 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#131480 = ORIENTED_EDGE('',*,*,#131481,.T.); +#131481 = EDGE_CURVE('',#131474,#131482,#131484,.T.); +#131482 = VERTEX_POINT('',#131483); +#131483 = CARTESIAN_POINT('',(146.498602,-132.598091,1.585)); +#131484 = LINE('',#131485,#131486); +#131485 = CARTESIAN_POINT('',(146.696443,-132.649392,1.585)); +#131486 = VECTOR('',#131487,1.); +#131487 = DIRECTION('',(-0.967986331989,0.251002910506,0.)); +#131488 = ORIENTED_EDGE('',*,*,#131489,.T.); +#131489 = EDGE_CURVE('',#131482,#131490,#131492,.T.); +#131490 = VERTEX_POINT('',#131491); +#131491 = CARTESIAN_POINT('',(146.389621,-132.541141,1.585)); +#131492 = LINE('',#131493,#131494); +#131493 = CARTESIAN_POINT('',(146.498602,-132.598091,1.585)); +#131494 = VECTOR('',#131495,1.); +#131495 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#131496 = ORIENTED_EDGE('',*,*,#131497,.T.); +#131497 = EDGE_CURVE('',#131490,#131498,#131500,.T.); +#131498 = VERTEX_POINT('',#131499); +#131499 = CARTESIAN_POINT('',(146.326168,-132.475611,1.585)); +#131500 = LINE('',#131501,#131502); +#131501 = CARTESIAN_POINT('',(146.389621,-132.541141,1.585)); +#131502 = VECTOR('',#131503,1.); +#131503 = DIRECTION('',(-0.695630129574,0.718400113328,0.)); +#131504 = ORIENTED_EDGE('',*,*,#131505,.T.); +#131505 = EDGE_CURVE('',#131498,#131506,#131508,.T.); +#131506 = VERTEX_POINT('',#131507); +#131507 = CARTESIAN_POINT('',(146.331534,-132.102773,1.585)); +#131508 = CIRCLE('',#131509,0.291002094877); +#131509 = AXIS2_PLACEMENT_3D('',#131510,#131511,#131512); +#131510 = CARTESIAN_POINT('',(146.55226236573,-132.2924074055,1.585)); +#131511 = DIRECTION('',(0.,0.,-1.)); +#131512 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#131513 = ORIENTED_EDGE('',*,*,#131514,.T.); +#131514 = EDGE_CURVE('',#131506,#131259,#131515,.T.); +#131515 = LINE('',#131516,#131517); +#131516 = CARTESIAN_POINT('',(146.331534,-132.102773,1.585)); +#131517 = VECTOR('',#131518,1.); +#131518 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#131519 = PLANE('',#131520); +#131520 = AXIS2_PLACEMENT_3D('',#131521,#131522,#131523); +#131521 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131522 = DIRECTION('',(0.,0.,1.)); +#131523 = DIRECTION('',(1.,0.,-0.)); +#131524 = SHELL_BASED_SURFACE_MODEL('',(#131525)); +#131525 = OPEN_SHELL('',(#131526)); +#131526 = ADVANCED_FACE('',(#131527),#131662,.T.); +#131527 = FACE_BOUND('',#131528,.F.); +#131528 = EDGE_LOOP('',(#131529,#131540,#131548,#131556,#131564,#131573, + #131581,#131589,#131598,#131606,#131614,#131623,#131631,#131639, + #131648,#131656)); +#131529 = ORIENTED_EDGE('',*,*,#131530,.T.); +#131530 = EDGE_CURVE('',#131531,#131533,#131535,.T.); +#131531 = VERTEX_POINT('',#131532); +#131532 = CARTESIAN_POINT('',(148.629017,-131.947951,1.585)); +#131533 = VERTEX_POINT('',#131534); +#131534 = CARTESIAN_POINT('',(148.746151,-132.030918,1.585)); +#131535 = CIRCLE('',#131536,7.499955990673E-02); +#131536 = AXIS2_PLACEMENT_3D('',#131537,#131538,#131539); +#131537 = CARTESIAN_POINT('',(148.67500050095,-132.0072000643,1.585)); +#131538 = DIRECTION('',(0.,0.,-1.)); +#131539 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#131540 = ORIENTED_EDGE('',*,*,#131541,.T.); +#131541 = EDGE_CURVE('',#131533,#131542,#131544,.T.); +#131542 = VERTEX_POINT('',#131543); +#131543 = CARTESIAN_POINT('',(148.540962,-132.646485,1.585)); +#131544 = LINE('',#131545,#131546); +#131545 = CARTESIAN_POINT('',(148.746151,-132.030918,1.585)); +#131546 = VECTOR('',#131547,1.); +#131547 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#131548 = ORIENTED_EDGE('',*,*,#131549,.T.); +#131549 = EDGE_CURVE('',#131542,#131550,#131552,.T.); +#131550 = VERTEX_POINT('',#131551); +#131551 = CARTESIAN_POINT('',(148.838095,-132.646485,1.585)); +#131552 = LINE('',#131553,#131554); +#131553 = CARTESIAN_POINT('',(148.540962,-132.646485,1.585)); +#131554 = VECTOR('',#131555,1.); +#131555 = DIRECTION('',(1.,0.,0.)); +#131556 = ORIENTED_EDGE('',*,*,#131557,.T.); +#131557 = EDGE_CURVE('',#131550,#131558,#131560,.T.); +#131558 = VERTEX_POINT('',#131559); +#131559 = CARTESIAN_POINT('',(148.839536,-132.37352,1.585)); +#131560 = LINE('',#131561,#131562); +#131561 = CARTESIAN_POINT('',(148.838095,-132.646485,1.585)); +#131562 = VECTOR('',#131563,1.); +#131563 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#131564 = ORIENTED_EDGE('',*,*,#131565,.T.); +#131565 = EDGE_CURVE('',#131558,#131566,#131568,.T.); +#131566 = VERTEX_POINT('',#131567); +#131567 = CARTESIAN_POINT('',(148.988095,-132.388152,1.585)); +#131568 = CIRCLE('',#131569,7.500006711463E-02); +#131569 = AXIS2_PLACEMENT_3D('',#131570,#131571,#131572); +#131570 = CARTESIAN_POINT('',(148.91309493288,-132.3881519328,1.585)); +#131571 = DIRECTION('',(0.,0.,-1.)); +#131572 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#131573 = ORIENTED_EDGE('',*,*,#131574,.T.); +#131574 = EDGE_CURVE('',#131566,#131575,#131577,.T.); +#131575 = VERTEX_POINT('',#131576); +#131576 = CARTESIAN_POINT('',(148.988095,-132.646485,1.585)); +#131577 = LINE('',#131578,#131579); +#131578 = CARTESIAN_POINT('',(148.988095,-132.388152,1.585)); +#131579 = VECTOR('',#131580,1.); +#131580 = DIRECTION('',(0.,-1.,0.)); +#131581 = ORIENTED_EDGE('',*,*,#131582,.T.); +#131582 = EDGE_CURVE('',#131575,#131583,#131585,.T.); +#131583 = VERTEX_POINT('',#131584); +#131584 = CARTESIAN_POINT('',(149.070584,-132.647926,1.585)); +#131585 = LINE('',#131586,#131587); +#131586 = CARTESIAN_POINT('',(148.988095,-132.646485,1.585)); +#131587 = VECTOR('',#131588,1.); +#131588 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#131589 = ORIENTED_EDGE('',*,*,#131590,.T.); +#131590 = EDGE_CURVE('',#131583,#131591,#131593,.T.); +#131591 = VERTEX_POINT('',#131592); +#131592 = CARTESIAN_POINT('',(149.055952,-132.796485,1.585)); +#131593 = CIRCLE('',#131594,7.500006711462E-02); +#131594 = AXIS2_PLACEMENT_3D('',#131595,#131596,#131597); +#131595 = CARTESIAN_POINT('',(149.05595206711,-132.7214849328,1.585)); +#131596 = DIRECTION('',(0.,0.,-1.)); +#131597 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#131598 = ORIENTED_EDGE('',*,*,#131599,.T.); +#131599 = EDGE_CURVE('',#131591,#131600,#131602,.T.); +#131600 = VERTEX_POINT('',#131601); +#131601 = CARTESIAN_POINT('',(148.988095,-132.796485,1.585)); +#131602 = LINE('',#131603,#131604); +#131603 = CARTESIAN_POINT('',(149.055952,-132.796485,1.585)); +#131604 = VECTOR('',#131605,1.); +#131605 = DIRECTION('',(-1.,0.,0.)); +#131606 = ORIENTED_EDGE('',*,*,#131607,.T.); +#131607 = EDGE_CURVE('',#131600,#131608,#131610,.T.); +#131608 = VERTEX_POINT('',#131609); +#131609 = CARTESIAN_POINT('',(148.986654,-133.069451,1.585)); +#131610 = LINE('',#131611,#131612); +#131611 = CARTESIAN_POINT('',(148.988095,-132.796485,1.585)); +#131612 = VECTOR('',#131613,1.); +#131613 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#131614 = ORIENTED_EDGE('',*,*,#131615,.T.); +#131615 = EDGE_CURVE('',#131608,#131616,#131618,.T.); +#131616 = VERTEX_POINT('',#131617); +#131617 = CARTESIAN_POINT('',(148.838095,-133.054819,1.585)); +#131618 = CIRCLE('',#131619,7.500006711463E-02); +#131619 = AXIS2_PLACEMENT_3D('',#131620,#131621,#131622); +#131620 = CARTESIAN_POINT('',(148.91309506711,-133.0548190671,1.585)); +#131621 = DIRECTION('',(-0.,0.,-1.)); +#131622 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#131623 = ORIENTED_EDGE('',*,*,#131624,.T.); +#131624 = EDGE_CURVE('',#131616,#131625,#131627,.T.); +#131625 = VERTEX_POINT('',#131626); +#131626 = CARTESIAN_POINT('',(148.838095,-132.796485,1.585)); +#131627 = LINE('',#131628,#131629); +#131628 = CARTESIAN_POINT('',(148.838095,-133.054819,1.585)); +#131629 = VECTOR('',#131630,1.); +#131630 = DIRECTION('',(0.,1.,0.)); +#131631 = ORIENTED_EDGE('',*,*,#131632,.T.); +#131632 = EDGE_CURVE('',#131625,#131633,#131635,.T.); +#131633 = VERTEX_POINT('',#131634); +#131634 = CARTESIAN_POINT('',(148.422273,-132.795044,1.585)); +#131635 = LINE('',#131636,#131637); +#131636 = CARTESIAN_POINT('',(148.838095,-132.796485,1.585)); +#131637 = VECTOR('',#131638,1.); +#131638 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#131639 = ORIENTED_EDGE('',*,*,#131640,.T.); +#131640 = EDGE_CURVE('',#131633,#131641,#131643,.T.); +#131641 = VERTEX_POINT('',#131642); +#131642 = CARTESIAN_POINT('',(148.365754,-132.697768,1.585)); +#131643 = CIRCLE('',#131644,7.499997045038E-02); +#131644 = AXIS2_PLACEMENT_3D('',#131645,#131646,#131647); +#131645 = CARTESIAN_POINT('',(148.43690517257,-132.7214852133,1.585)); +#131646 = DIRECTION('',(0.,0.,-1.)); +#131647 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#131648 = ORIENTED_EDGE('',*,*,#131649,.T.); +#131649 = EDGE_CURVE('',#131641,#131650,#131652,.T.); +#131650 = VERTEX_POINT('',#131651); +#131651 = CARTESIAN_POINT('',(148.609843,-131.970058,1.585)); +#131652 = LINE('',#131653,#131654); +#131653 = CARTESIAN_POINT('',(148.365754,-132.697768,1.585)); +#131654 = VECTOR('',#131655,1.); +#131655 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#131656 = ORIENTED_EDGE('',*,*,#131657,.T.); +#131657 = EDGE_CURVE('',#131650,#131531,#131658,.T.); +#131658 = LINE('',#131659,#131660); +#131659 = CARTESIAN_POINT('',(148.609843,-131.970058,1.585)); +#131660 = VECTOR('',#131661,1.); +#131661 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#131662 = PLANE('',#131663); +#131663 = AXIS2_PLACEMENT_3D('',#131664,#131665,#131666); +#131664 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131665 = DIRECTION('',(0.,0.,1.)); +#131666 = DIRECTION('',(1.,0.,-0.)); +#131667 = SHELL_BASED_SURFACE_MODEL('',(#131668)); +#131668 = OPEN_SHELL('',(#131669)); +#131669 = ADVANCED_FACE('',(#131670),#131714,.T.); +#131670 = FACE_BOUND('',#131671,.F.); +#131671 = EDGE_LOOP('',(#131672,#131683,#131691,#131700,#131708)); +#131672 = ORIENTED_EDGE('',*,*,#131673,.T.); +#131673 = EDGE_CURVE('',#131674,#131676,#131678,.T.); +#131674 = VERTEX_POINT('',#131675); +#131675 = CARTESIAN_POINT('',(159.499567,-131.802039,1.585)); +#131676 = VERTEX_POINT('',#131677); +#131677 = CARTESIAN_POINT('',(159.615,-131.825,1.585)); +#131678 = CIRCLE('',#131679,6.000007318646E-02); +#131679 = AXIS2_PLACEMENT_3D('',#131680,#131681,#131682); +#131680 = CARTESIAN_POINT('',(159.55499992681,-131.8249998233,1.585)); +#131681 = DIRECTION('',(0.,0.,-1.)); +#131682 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#131683 = ORIENTED_EDGE('',*,*,#131684,.T.); +#131684 = EDGE_CURVE('',#131676,#131685,#131687,.T.); +#131685 = VERTEX_POINT('',#131686); +#131686 = CARTESIAN_POINT('',(159.615,-132.725,1.585)); +#131687 = LINE('',#131688,#131689); +#131688 = CARTESIAN_POINT('',(159.615,-131.825,1.585)); +#131689 = VECTOR('',#131690,1.); +#131690 = DIRECTION('',(0.,-1.,0.)); +#131691 = ORIENTED_EDGE('',*,*,#131692,.T.); +#131692 = EDGE_CURVE('',#131685,#131693,#131695,.T.); +#131693 = VERTEX_POINT('',#131694); +#131694 = CARTESIAN_POINT('',(159.495,-132.725,1.585)); +#131695 = CIRCLE('',#131696,6.000000000043E-02); +#131696 = AXIS2_PLACEMENT_3D('',#131697,#131698,#131699); +#131697 = CARTESIAN_POINT('',(159.555,-132.7250002255,1.585)); +#131698 = DIRECTION('',(0.,0.,-1.)); +#131699 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#131700 = ORIENTED_EDGE('',*,*,#131701,.T.); +#131701 = EDGE_CURVE('',#131693,#131702,#131704,.T.); +#131702 = VERTEX_POINT('',#131703); +#131703 = CARTESIAN_POINT('',(159.495,-131.825,1.585)); +#131704 = LINE('',#131705,#131706); +#131705 = CARTESIAN_POINT('',(159.495,-132.725,1.585)); +#131706 = VECTOR('',#131707,1.); +#131707 = DIRECTION('',(0.,1.,0.)); +#131708 = ORIENTED_EDGE('',*,*,#131709,.T.); +#131709 = EDGE_CURVE('',#131702,#131674,#131710,.T.); +#131710 = LINE('',#131711,#131712); +#131711 = CARTESIAN_POINT('',(159.495,-131.825,1.585)); +#131712 = VECTOR('',#131713,1.); +#131713 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#131714 = PLANE('',#131715); +#131715 = AXIS2_PLACEMENT_3D('',#131716,#131717,#131718); +#131716 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131717 = DIRECTION('',(0.,0.,1.)); +#131718 = DIRECTION('',(1.,0.,-0.)); +#131719 = SHELL_BASED_SURFACE_MODEL('',(#131720)); +#131720 = OPEN_SHELL('',(#131721)); +#131721 = ADVANCED_FACE('',(#131722),#131766,.T.); +#131722 = FACE_BOUND('',#131723,.F.); +#131723 = EDGE_LOOP('',(#131724,#131735,#131743,#131752,#131760)); +#131724 = ORIENTED_EDGE('',*,*,#131725,.T.); +#131725 = EDGE_CURVE('',#131726,#131728,#131730,.T.); +#131726 = VERTEX_POINT('',#131727); +#131727 = CARTESIAN_POINT('',(168.689567,-131.802039,1.585)); +#131728 = VERTEX_POINT('',#131729); +#131729 = CARTESIAN_POINT('',(168.805,-131.825,1.585)); +#131730 = CIRCLE('',#131731,6.000007318647E-02); +#131731 = AXIS2_PLACEMENT_3D('',#131732,#131733,#131734); +#131732 = CARTESIAN_POINT('',(168.74499992681,-131.8249998233,1.585)); +#131733 = DIRECTION('',(0.,0.,-1.)); +#131734 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#131735 = ORIENTED_EDGE('',*,*,#131736,.T.); +#131736 = EDGE_CURVE('',#131728,#131737,#131739,.T.); +#131737 = VERTEX_POINT('',#131738); +#131738 = CARTESIAN_POINT('',(168.805,-132.725,1.585)); +#131739 = LINE('',#131740,#131741); +#131740 = CARTESIAN_POINT('',(168.805,-131.825,1.585)); +#131741 = VECTOR('',#131742,1.); +#131742 = DIRECTION('',(0.,-1.,0.)); +#131743 = ORIENTED_EDGE('',*,*,#131744,.T.); +#131744 = EDGE_CURVE('',#131737,#131745,#131747,.T.); +#131745 = VERTEX_POINT('',#131746); +#131746 = CARTESIAN_POINT('',(168.685,-132.725,1.585)); +#131747 = CIRCLE('',#131748,6.000000000042E-02); +#131748 = AXIS2_PLACEMENT_3D('',#131749,#131750,#131751); +#131749 = CARTESIAN_POINT('',(168.745,-132.7250002255,1.585)); +#131750 = DIRECTION('',(0.,0.,-1.)); +#131751 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#131752 = ORIENTED_EDGE('',*,*,#131753,.T.); +#131753 = EDGE_CURVE('',#131745,#131754,#131756,.T.); +#131754 = VERTEX_POINT('',#131755); +#131755 = CARTESIAN_POINT('',(168.685,-131.825,1.585)); +#131756 = LINE('',#131757,#131758); +#131757 = CARTESIAN_POINT('',(168.685,-132.725,1.585)); +#131758 = VECTOR('',#131759,1.); +#131759 = DIRECTION('',(0.,1.,0.)); +#131760 = ORIENTED_EDGE('',*,*,#131761,.T.); +#131761 = EDGE_CURVE('',#131754,#131726,#131762,.T.); +#131762 = LINE('',#131763,#131764); +#131763 = CARTESIAN_POINT('',(168.685,-131.825,1.585)); +#131764 = VECTOR('',#131765,1.); +#131765 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#131766 = PLANE('',#131767); +#131767 = AXIS2_PLACEMENT_3D('',#131768,#131769,#131770); +#131768 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131769 = DIRECTION('',(0.,0.,1.)); +#131770 = DIRECTION('',(1.,0.,-0.)); +#131771 = SHELL_BASED_SURFACE_MODEL('',(#131772)); +#131772 = OPEN_SHELL('',(#131773)); +#131773 = ADVANCED_FACE('',(#131774),#131960,.T.); +#131774 = FACE_BOUND('',#131775,.F.); +#131775 = EDGE_LOOP('',(#131776,#131787,#131795,#131803,#131811,#131819, + #131828,#131836,#131845,#131853,#131862,#131870,#131879,#131887, + #131895,#131903,#131912,#131920,#131928,#131937,#131945,#131954)); +#131776 = ORIENTED_EDGE('',*,*,#131777,.T.); +#131777 = EDGE_CURVE('',#131778,#131780,#131782,.T.); +#131778 = VERTEX_POINT('',#131779); +#131779 = CARTESIAN_POINT('',(117.580369,-132.313914,1.585)); +#131780 = VERTEX_POINT('',#131781); +#131781 = CARTESIAN_POINT('',(117.799225,-132.095057,1.585)); +#131782 = CIRCLE('',#131783,0.308109459502); +#131783 = AXIS2_PLACEMENT_3D('',#131784,#131785,#131786); +#131784 = CARTESIAN_POINT('',(117.87818845359,-132.3928760927,1.585)); +#131785 = DIRECTION('',(0.,0.,-1.)); +#131786 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#131787 = ORIENTED_EDGE('',*,*,#131788,.T.); +#131788 = EDGE_CURVE('',#131780,#131789,#131791,.T.); +#131789 = VERTEX_POINT('',#131790); +#131790 = CARTESIAN_POINT('',(118.031361,-132.092777,1.585)); +#131791 = LINE('',#131792,#131793); +#131792 = CARTESIAN_POINT('',(117.799225,-132.095057,1.585)); +#131793 = VECTOR('',#131794,1.); +#131794 = DIRECTION('',(0.999951769331,9.821354869817E-03,0.)); +#131795 = ORIENTED_EDGE('',*,*,#131796,.T.); +#131796 = EDGE_CURVE('',#131789,#131797,#131799,.T.); +#131797 = VERTEX_POINT('',#131798); +#131798 = CARTESIAN_POINT('',(118.057237,-132.099004,1.585)); +#131799 = LINE('',#131800,#131801); +#131800 = CARTESIAN_POINT('',(118.031361,-132.092777,1.585)); +#131801 = VECTOR('',#131802,1.); +#131802 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#131803 = ORIENTED_EDGE('',*,*,#131804,.T.); +#131804 = EDGE_CURVE('',#131797,#131805,#131807,.T.); +#131805 = VERTEX_POINT('',#131806); +#131806 = CARTESIAN_POINT('',(118.159844,-132.154037,1.585)); +#131807 = LINE('',#131808,#131809); +#131808 = CARTESIAN_POINT('',(118.057237,-132.099004,1.585)); +#131809 = VECTOR('',#131810,1.); +#131810 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#131811 = ORIENTED_EDGE('',*,*,#131812,.T.); +#131812 = EDGE_CURVE('',#131805,#131813,#131815,.T.); +#131813 = VERTEX_POINT('',#131814); +#131814 = CARTESIAN_POINT('',(118.214878,-132.213788,1.585)); +#131815 = LINE('',#131816,#131817); +#131816 = CARTESIAN_POINT('',(118.159844,-132.154037,1.585)); +#131817 = VECTOR('',#131818,1.); +#131818 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#131819 = ORIENTED_EDGE('',*,*,#131820,.T.); +#131820 = EDGE_CURVE('',#131813,#131821,#131823,.T.); +#131821 = VERTEX_POINT('',#131822); +#131822 = CARTESIAN_POINT('',(118.208491,-132.708725,1.585)); +#131823 = CIRCLE('',#131824,0.457783772261); +#131824 = AXIS2_PLACEMENT_3D('',#131825,#131826,#131827); +#131825 = CARTESIAN_POINT('',(117.82659953493,-132.4562871045,1.585)); +#131826 = DIRECTION('',(0.,0.,-1.)); +#131827 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#131828 = ORIENTED_EDGE('',*,*,#131829,.T.); +#131829 = EDGE_CURVE('',#131821,#131830,#131832,.T.); +#131830 = VERTEX_POINT('',#131831); +#131831 = CARTESIAN_POINT('',(118.159843,-132.760247,1.585)); +#131832 = LINE('',#131833,#131834); +#131833 = CARTESIAN_POINT('',(118.208491,-132.708725,1.585)); +#131834 = VECTOR('',#131835,1.); +#131835 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#131836 = ORIENTED_EDGE('',*,*,#131837,.T.); +#131837 = EDGE_CURVE('',#131830,#131838,#131840,.T.); +#131838 = VERTEX_POINT('',#131839); +#131839 = CARTESIAN_POINT('',(118.067921,-132.668323,1.585)); +#131840 = CIRCLE('',#131841,6.499937665136E-02); +#131841 = AXIS2_PLACEMENT_3D('',#131842,#131843,#131844); +#131842 = CARTESIAN_POINT('',(118.11388218097,-132.714284819,1.585)); +#131843 = DIRECTION('',(-0.,0.,-1.)); +#131844 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#131845 = ORIENTED_EDGE('',*,*,#131846,.T.); +#131846 = EDGE_CURVE('',#131838,#131847,#131849,.T.); +#131847 = VERTEX_POINT('',#131848); +#131848 = CARTESIAN_POINT('',(118.103319,-132.632925,1.585)); +#131849 = LINE('',#131850,#131851); +#131850 = CARTESIAN_POINT('',(118.067921,-132.668323,1.585)); +#131851 = VECTOR('',#131852,1.); +#131852 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#131853 = ORIENTED_EDGE('',*,*,#131854,.T.); +#131854 = EDGE_CURVE('',#131847,#131855,#131857,.T.); +#131855 = VERTEX_POINT('',#131856); +#131856 = CARTESIAN_POINT('',(118.103319,-132.28136,1.585)); +#131857 = CIRCLE('',#131858,0.325008683278); +#131858 = AXIS2_PLACEMENT_3D('',#131859,#131860,#131861); +#131859 = CARTESIAN_POINT('',(117.829949,-132.4571425,1.585)); +#131860 = DIRECTION('',(0.,-0.,1.)); +#131861 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#131862 = ORIENTED_EDGE('',*,*,#131863,.T.); +#131863 = EDGE_CURVE('',#131855,#131864,#131866,.T.); +#131864 = VERTEX_POINT('',#131865); +#131865 = CARTESIAN_POINT('',(118.075379,-132.25342,1.585)); +#131866 = LINE('',#131867,#131868); +#131867 = CARTESIAN_POINT('',(118.103319,-132.28136,1.585)); +#131868 = VECTOR('',#131869,1.); +#131869 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#131870 = ORIENTED_EDGE('',*,*,#131871,.T.); +#131871 = EDGE_CURVE('',#131864,#131872,#131874,.T.); +#131872 = VERTEX_POINT('',#131873); +#131873 = CARTESIAN_POINT('',(117.766671,-132.25342,1.585)); +#131874 = CIRCLE('',#131875,0.277419178293); +#131875 = AXIS2_PLACEMENT_3D('',#131876,#131877,#131878); +#131876 = CARTESIAN_POINT('',(117.921025,-132.483933,1.585)); +#131877 = DIRECTION('',(0.,0.,1.)); +#131878 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#131879 = ORIENTED_EDGE('',*,*,#131880,.T.); +#131880 = EDGE_CURVE('',#131872,#131881,#131883,.T.); +#131881 = VERTEX_POINT('',#131882); +#131882 = CARTESIAN_POINT('',(117.738733,-132.281358,1.585)); +#131883 = LINE('',#131884,#131885); +#131884 = CARTESIAN_POINT('',(117.766671,-132.25342,1.585)); +#131885 = VECTOR('',#131886,1.); +#131886 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#131887 = ORIENTED_EDGE('',*,*,#131888,.T.); +#131888 = EDGE_CURVE('',#131881,#131889,#131891,.T.); +#131889 = VERTEX_POINT('',#131890); +#131890 = CARTESIAN_POINT('',(117.707454,-132.343916,1.585)); +#131891 = LINE('',#131892,#131893); +#131892 = CARTESIAN_POINT('',(117.738733,-132.281358,1.585)); +#131893 = VECTOR('',#131894,1.); +#131894 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#131895 = ORIENTED_EDGE('',*,*,#131896,.T.); +#131896 = EDGE_CURVE('',#131889,#131897,#131899,.T.); +#131897 = VERTEX_POINT('',#131898); +#131898 = CARTESIAN_POINT('',(117.707454,-132.457142,1.585)); +#131899 = LINE('',#131900,#131901); +#131900 = CARTESIAN_POINT('',(117.707454,-132.343916,1.585)); +#131901 = VECTOR('',#131902,1.); +#131902 = DIRECTION('',(0.,-1.,0.)); +#131903 = ORIENTED_EDGE('',*,*,#131904,.T.); +#131904 = EDGE_CURVE('',#131897,#131905,#131907,.T.); +#131905 = VERTEX_POINT('',#131906); +#131906 = CARTESIAN_POINT('',(117.599652,-132.50606,1.585)); +#131907 = CIRCLE('',#131908,6.500010429713E-02); +#131908 = AXIS2_PLACEMENT_3D('',#131909,#131910,#131911); +#131909 = CARTESIAN_POINT('',(117.6424538957,-132.4571415854,1.585)); +#131910 = DIRECTION('',(-0.,0.,-1.)); +#131911 = DIRECTION('',(0.99999999998,-6.377789005542E-06,-0.)); +#131912 = ORIENTED_EDGE('',*,*,#131913,.T.); +#131913 = EDGE_CURVE('',#131905,#131914,#131916,.T.); +#131914 = VERTEX_POINT('',#131915); +#131915 = CARTESIAN_POINT('',(117.364597,-132.300386,1.585)); +#131916 = LINE('',#131917,#131918); +#131917 = CARTESIAN_POINT('',(117.599652,-132.50606,1.585)); +#131918 = VECTOR('',#131919,1.); +#131919 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#131920 = ORIENTED_EDGE('',*,*,#131921,.T.); +#131921 = EDGE_CURVE('',#131914,#131922,#131924,.T.); +#131922 = VERTEX_POINT('',#131923); +#131923 = CARTESIAN_POINT('',(117.364597,-132.714285,1.585)); +#131924 = LINE('',#131925,#131926); +#131925 = CARTESIAN_POINT('',(117.364597,-132.300386,1.585)); +#131926 = VECTOR('',#131927,1.); +#131927 = DIRECTION('',(0.,-1.,0.)); +#131928 = ORIENTED_EDGE('',*,*,#131929,.T.); +#131929 = EDGE_CURVE('',#131922,#131930,#131932,.T.); +#131930 = VERTEX_POINT('',#131931); +#131931 = CARTESIAN_POINT('',(117.234597,-132.714285,1.585)); +#131932 = CIRCLE('',#131933,6.500000000093E-02); +#131933 = AXIS2_PLACEMENT_3D('',#131934,#131935,#131936); +#131934 = CARTESIAN_POINT('',(117.299597,-132.7142846551,1.585)); +#131935 = DIRECTION('',(-0.,0.,-1.)); +#131936 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#131937 = ORIENTED_EDGE('',*,*,#131938,.T.); +#131938 = EDGE_CURVE('',#131930,#131939,#131941,.T.); +#131939 = VERTEX_POINT('',#131940); +#131940 = CARTESIAN_POINT('',(117.234597,-132.157142,1.585)); +#131941 = LINE('',#131942,#131943); +#131942 = CARTESIAN_POINT('',(117.234597,-132.714285,1.585)); +#131943 = VECTOR('',#131944,1.); +#131944 = DIRECTION('',(0.,1.,0.)); +#131945 = ORIENTED_EDGE('',*,*,#131946,.T.); +#131946 = EDGE_CURVE('',#131939,#131947,#131949,.T.); +#131947 = VERTEX_POINT('',#131948); +#131948 = CARTESIAN_POINT('',(117.3424,-132.108225,1.585)); +#131949 = CIRCLE('',#131950,6.500002288385E-02); +#131950 = AXIS2_PLACEMENT_3D('',#131951,#131952,#131953); +#131951 = CARTESIAN_POINT('',(117.29959702288,-132.1571423601,1.585)); +#131952 = DIRECTION('',(0.,0.,-1.)); +#131953 = DIRECTION('',(-0.999999999985,5.540887697237E-06,0.)); +#131954 = ORIENTED_EDGE('',*,*,#131955,.T.); +#131955 = EDGE_CURVE('',#131947,#131778,#131956,.T.); +#131956 = LINE('',#131957,#131958); +#131957 = CARTESIAN_POINT('',(117.3424,-132.108225,1.585)); +#131958 = VECTOR('',#131959,1.); +#131959 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#131960 = PLANE('',#131961); +#131961 = AXIS2_PLACEMENT_3D('',#131962,#131963,#131964); +#131962 = CARTESIAN_POINT('',(0.,0.,1.585)); +#131963 = DIRECTION('',(0.,0.,1.)); +#131964 = DIRECTION('',(1.,0.,-0.)); +#131965 = SHELL_BASED_SURFACE_MODEL('',(#131966)); +#131966 = OPEN_SHELL('',(#131967)); +#131967 = ADVANCED_FACE('',(#131968),#132054,.T.); +#131968 = FACE_BOUND('',#131969,.F.); +#131969 = EDGE_LOOP('',(#131970,#131981,#131989,#131998,#132006,#132014, + #132023,#132031,#132040,#132048)); +#131970 = ORIENTED_EDGE('',*,*,#131971,.T.); +#131971 = EDGE_CURVE('',#131972,#131974,#131976,.T.); +#131972 = VERTEX_POINT('',#131973); +#131973 = CARTESIAN_POINT('',(127.459597,-132.007856,1.585)); +#131974 = VERTEX_POINT('',#131975); +#131975 = CARTESIAN_POINT('',(127.459597,-131.877856,1.585)); +#131976 = CIRCLE('',#131977,6.500000000092E-02); +#131977 = AXIS2_PLACEMENT_3D('',#131978,#131979,#131980); +#131978 = CARTESIAN_POINT('',(127.45959734486,-131.942856,1.585)); +#131979 = DIRECTION('',(0.,0.,-1.)); +#131980 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#131981 = ORIENTED_EDGE('',*,*,#131982,.T.); +#131982 = EDGE_CURVE('',#131974,#131983,#131985,.T.); +#131983 = VERTEX_POINT('',#131984); +#131984 = CARTESIAN_POINT('',(128.359597,-131.877856,1.585)); +#131985 = LINE('',#131986,#131987); +#131986 = CARTESIAN_POINT('',(127.459597,-131.877856,1.585)); +#131987 = VECTOR('',#131988,1.); +#131988 = DIRECTION('',(1.,0.,0.)); +#131989 = ORIENTED_EDGE('',*,*,#131990,.T.); +#131990 = EDGE_CURVE('',#131983,#131991,#131993,.T.); +#131991 = VERTEX_POINT('',#131992); +#131992 = CARTESIAN_POINT('',(128.391846,-131.999292,1.585)); +#131993 = CIRCLE('',#131994,6.500021194141E-02); +#131994 = AXIS2_PLACEMENT_3D('',#131995,#131996,#131997); +#131995 = CARTESIAN_POINT('',(128.35959651351,-131.9428562119,1.585)); +#131996 = DIRECTION('',(0.,0.,-1.)); +#131997 = DIRECTION('',(7.484332552717E-06,0.999999999972,0.)); +#131998 = ORIENTED_EDGE('',*,*,#131999,.T.); +#131999 = EDGE_CURVE('',#131991,#132000,#132002,.T.); +#132000 = VERTEX_POINT('',#132001); +#132001 = CARTESIAN_POINT('',(127.704359,-132.392142,1.585)); +#132002 = LINE('',#132003,#132004); +#132003 = CARTESIAN_POINT('',(128.391846,-131.999292,1.585)); +#132004 = VECTOR('',#132005,1.); +#132005 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#132006 = ORIENTED_EDGE('',*,*,#132007,.T.); +#132007 = EDGE_CURVE('',#132000,#132008,#132010,.T.); +#132008 = VERTEX_POINT('',#132009); +#132009 = CARTESIAN_POINT('',(128.359597,-132.392142,1.585)); +#132010 = LINE('',#132011,#132012); +#132011 = CARTESIAN_POINT('',(127.704359,-132.392142,1.585)); +#132012 = VECTOR('',#132013,1.); +#132013 = DIRECTION('',(1.,0.,0.)); +#132014 = ORIENTED_EDGE('',*,*,#132015,.T.); +#132015 = EDGE_CURVE('',#132008,#132016,#132018,.T.); +#132016 = VERTEX_POINT('',#132017); +#132017 = CARTESIAN_POINT('',(128.359597,-132.522142,1.585)); +#132018 = CIRCLE('',#132019,6.500000000092E-02); +#132019 = AXIS2_PLACEMENT_3D('',#132020,#132021,#132022); +#132020 = CARTESIAN_POINT('',(128.35959665513,-132.457142,1.585)); +#132021 = DIRECTION('',(0.,0.,-1.)); +#132022 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#132023 = ORIENTED_EDGE('',*,*,#132024,.T.); +#132024 = EDGE_CURVE('',#132016,#132025,#132027,.T.); +#132025 = VERTEX_POINT('',#132026); +#132026 = CARTESIAN_POINT('',(127.459597,-132.522142,1.585)); +#132027 = LINE('',#132028,#132029); +#132028 = CARTESIAN_POINT('',(128.359597,-132.522142,1.585)); +#132029 = VECTOR('',#132030,1.); +#132030 = DIRECTION('',(-1.,0.,0.)); +#132031 = ORIENTED_EDGE('',*,*,#132032,.T.); +#132032 = EDGE_CURVE('',#132025,#132033,#132035,.T.); +#132033 = VERTEX_POINT('',#132034); +#132034 = CARTESIAN_POINT('',(127.427348,-132.400706,1.585)); +#132035 = CIRCLE('',#132036,6.500021194141E-02); +#132036 = AXIS2_PLACEMENT_3D('',#132037,#132038,#132039); +#132037 = CARTESIAN_POINT('',(127.45959748648,-132.457141788,1.585)); +#132038 = DIRECTION('',(0.,0.,-1.)); +#132039 = DIRECTION('',(-7.484332334092E-06,-0.999999999972,-0.)); +#132040 = ORIENTED_EDGE('',*,*,#132041,.T.); +#132041 = EDGE_CURVE('',#132033,#132042,#132044,.T.); +#132042 = VERTEX_POINT('',#132043); +#132043 = CARTESIAN_POINT('',(128.114835,-132.007856,1.585)); +#132044 = LINE('',#132045,#132046); +#132045 = CARTESIAN_POINT('',(127.427348,-132.400706,1.585)); +#132046 = VECTOR('',#132047,1.); +#132047 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#132048 = ORIENTED_EDGE('',*,*,#132049,.T.); +#132049 = EDGE_CURVE('',#132042,#131972,#132050,.T.); +#132050 = LINE('',#132051,#132052); +#132051 = CARTESIAN_POINT('',(128.114835,-132.007856,1.585)); +#132052 = VECTOR('',#132053,1.); +#132053 = DIRECTION('',(-1.,0.,0.)); +#132054 = PLANE('',#132055); +#132055 = AXIS2_PLACEMENT_3D('',#132056,#132057,#132058); +#132056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132057 = DIRECTION('',(0.,0.,1.)); +#132058 = DIRECTION('',(1.,0.,-0.)); +#132059 = SHELL_BASED_SURFACE_MODEL('',(#132060)); +#132060 = OPEN_SHELL('',(#132061)); +#132061 = ADVANCED_FACE('',(#132062),#132098,.T.); +#132062 = FACE_BOUND('',#132063,.F.); +#132063 = EDGE_LOOP('',(#132064,#132075,#132083,#132092)); +#132064 = ORIENTED_EDGE('',*,*,#132065,.T.); +#132065 = EDGE_CURVE('',#132066,#132068,#132070,.T.); +#132066 = VERTEX_POINT('',#132067); +#132067 = CARTESIAN_POINT('',(200.19165,-132.3831,1.585)); +#132068 = VERTEX_POINT('',#132069); +#132069 = CARTESIAN_POINT('',(200.19165,-132.2631,1.585)); +#132070 = CIRCLE('',#132071,6.000000000042E-02); +#132071 = AXIS2_PLACEMENT_3D('',#132072,#132073,#132074); +#132072 = CARTESIAN_POINT('',(200.19164977441,-132.3231,1.585)); +#132073 = DIRECTION('',(0.,0.,-1.)); +#132074 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#132075 = ORIENTED_EDGE('',*,*,#132076,.T.); +#132076 = EDGE_CURVE('',#132068,#132077,#132079,.T.); +#132077 = VERTEX_POINT('',#132078); +#132078 = CARTESIAN_POINT('',(204.69165,-132.2631,1.585)); +#132079 = LINE('',#132080,#132081); +#132080 = CARTESIAN_POINT('',(200.19165,-132.2631,1.585)); +#132081 = VECTOR('',#132082,1.); +#132082 = DIRECTION('',(1.,0.,0.)); +#132083 = ORIENTED_EDGE('',*,*,#132084,.T.); +#132084 = EDGE_CURVE('',#132077,#132085,#132087,.T.); +#132085 = VERTEX_POINT('',#132086); +#132086 = CARTESIAN_POINT('',(204.69165,-132.3831,1.585)); +#132087 = CIRCLE('',#132088,6.000000000042E-02); +#132088 = AXIS2_PLACEMENT_3D('',#132089,#132090,#132091); +#132089 = CARTESIAN_POINT('',(204.69165022558,-132.3231,1.585)); +#132090 = DIRECTION('',(0.,0.,-1.)); +#132091 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#132092 = ORIENTED_EDGE('',*,*,#132093,.T.); +#132093 = EDGE_CURVE('',#132085,#132066,#132094,.T.); +#132094 = LINE('',#132095,#132096); +#132095 = CARTESIAN_POINT('',(204.69165,-132.3831,1.585)); +#132096 = VECTOR('',#132097,1.); +#132097 = DIRECTION('',(-1.,0.,0.)); +#132098 = PLANE('',#132099); +#132099 = AXIS2_PLACEMENT_3D('',#132100,#132101,#132102); +#132100 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132101 = DIRECTION('',(0.,0.,1.)); +#132102 = DIRECTION('',(1.,0.,-0.)); +#132103 = SHELL_BASED_SURFACE_MODEL('',(#132104)); +#132104 = OPEN_SHELL('',(#132105)); +#132105 = ADVANCED_FACE('',(#132106),#132249,.T.); +#132106 = FACE_BOUND('',#132107,.F.); +#132107 = EDGE_LOOP('',(#132108,#132118,#132126,#132134,#132143,#132151, + #132159,#132168,#132176,#132184,#132193,#132201,#132209,#132218, + #132226,#132235,#132243)); +#132108 = ORIENTED_EDGE('',*,*,#132109,.T.); +#132109 = EDGE_CURVE('',#132110,#132112,#132114,.T.); +#132110 = VERTEX_POINT('',#132111); +#132111 = CARTESIAN_POINT('',(84.289335,-130.870572,1.585)); +#132112 = VERTEX_POINT('',#132113); +#132113 = CARTESIAN_POINT('',(84.312175,-130.849656,1.585)); +#132114 = LINE('',#132115,#132116); +#132115 = CARTESIAN_POINT('',(84.289335,-130.870572,1.585)); +#132116 = VECTOR('',#132117,1.); +#132117 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#132118 = ORIENTED_EDGE('',*,*,#132119,.T.); +#132119 = EDGE_CURVE('',#132112,#132120,#132122,.T.); +#132120 = VERTEX_POINT('',#132121); +#132121 = CARTESIAN_POINT('',(84.341282,-130.839071,1.585)); +#132122 = LINE('',#132123,#132124); +#132123 = CARTESIAN_POINT('',(84.312175,-130.849656,1.585)); +#132124 = VECTOR('',#132125,1.); +#132125 = DIRECTION('',(0.939786824446,0.341761209908,0.)); +#132126 = ORIENTED_EDGE('',*,*,#132127,.T.); +#132127 = EDGE_CURVE('',#132120,#132128,#132130,.T.); +#132128 = VERTEX_POINT('',#132129); +#132129 = CARTESIAN_POINT('',(84.355046,-130.839676,1.585)); +#132130 = LINE('',#132131,#132132); +#132131 = CARTESIAN_POINT('',(84.341282,-130.839071,1.585)); +#132132 = VECTOR('',#132133,1.); +#132133 = DIRECTION('',(0.99903536577,-4.391284483422E-02,0.)); +#132134 = ORIENTED_EDGE('',*,*,#132135,.T.); +#132135 = EDGE_CURVE('',#132128,#132136,#132138,.T.); +#132136 = VERTEX_POINT('',#132137); +#132137 = CARTESIAN_POINT('',(84.425908,-130.889307,1.585)); +#132138 = CIRCLE('',#132139,7.786403695731E-02); +#132139 = AXIS2_PLACEMENT_3D('',#132140,#132141,#132142); +#132140 = CARTESIAN_POINT('',(84.353335522407,-130.9175212472,1.585)); +#132141 = DIRECTION('',(0.,0.,-1.)); +#132142 = DIRECTION('',(2.196749179894E-02,0.999758685536,0.)); +#132143 = ORIENTED_EDGE('',*,*,#132144,.T.); +#132144 = EDGE_CURVE('',#132136,#132145,#132147,.T.); +#132145 = VERTEX_POINT('',#132146); +#132146 = CARTESIAN_POINT('',(84.432708,-130.917526,1.585)); +#132147 = LINE('',#132148,#132149); +#132148 = CARTESIAN_POINT('',(84.425908,-130.889307,1.585)); +#132149 = VECTOR('',#132150,1.); +#132150 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#132151 = ORIENTED_EDGE('',*,*,#132152,.T.); +#132152 = EDGE_CURVE('',#132145,#132153,#132155,.T.); +#132153 = VERTEX_POINT('',#132154); +#132154 = CARTESIAN_POINT('',(84.431183,-132.203011,1.585)); +#132155 = LINE('',#132156,#132157); +#132156 = CARTESIAN_POINT('',(84.432708,-130.917526,1.585)); +#132157 = VECTOR('',#132158,1.); +#132158 = DIRECTION('',(-1.186321837197E-03,-0.99999929632,0.)); +#132159 = ORIENTED_EDGE('',*,*,#132160,.T.); +#132160 = EDGE_CURVE('',#132153,#132161,#132163,.T.); +#132161 = VERTEX_POINT('',#132162); +#132162 = CARTESIAN_POINT('',(84.275483,-132.203011,1.585)); +#132163 = CIRCLE('',#132164,7.937510771647E-02); +#132164 = AXIS2_PLACEMENT_3D('',#132165,#132166,#132167); +#132165 = CARTESIAN_POINT('',(84.353333,-132.187526,1.585)); +#132166 = DIRECTION('',(-0.,0.,-1.)); +#132167 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132168 = ORIENTED_EDGE('',*,*,#132169,.T.); +#132169 = EDGE_CURVE('',#132161,#132170,#132172,.T.); +#132170 = VERTEX_POINT('',#132171); +#132171 = CARTESIAN_POINT('',(84.273958,-131.275314,1.585)); +#132172 = LINE('',#132173,#132174); +#132173 = CARTESIAN_POINT('',(84.275483,-132.203011,1.585)); +#132174 = VECTOR('',#132175,1.); +#132175 = DIRECTION('',(-1.643853477515E-03,0.999998648872,0.)); +#132176 = ORIENTED_EDGE('',*,*,#132177,.T.); +#132177 = EDGE_CURVE('',#132170,#132178,#132180,.T.); +#132178 = VERTEX_POINT('',#132179); +#132179 = CARTESIAN_POINT('',(83.993998,-131.871623,1.585)); +#132180 = LINE('',#132181,#132182); +#132181 = CARTESIAN_POINT('',(84.273958,-131.275314,1.585)); +#132182 = VECTOR('',#132183,1.); +#132183 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#132184 = ORIENTED_EDGE('',*,*,#132185,.T.); +#132185 = EDGE_CURVE('',#132178,#132186,#132188,.T.); +#132186 = VERTEX_POINT('',#132187); +#132187 = CARTESIAN_POINT('',(83.858072,-131.858235,1.585)); +#132188 = CIRCLE('',#132189,7.93746455782E-02); +#132189 = AXIS2_PLACEMENT_3D('',#132190,#132191,#132192); +#132190 = CARTESIAN_POINT('',(83.930000355023,-131.8246694506,1.585)); +#132191 = DIRECTION('',(-0.,0.,-1.)); +#132192 = DIRECTION('',(0.806273143147,-0.591543420756,-0.)); +#132193 = ORIENTED_EDGE('',*,*,#132194,.T.); +#132194 = EDGE_CURVE('',#132186,#132195,#132197,.T.); +#132195 = VERTEX_POINT('',#132196); +#132196 = CARTESIAN_POINT('',(83.586041,-131.275312,1.585)); +#132197 = LINE('',#132198,#132199); +#132198 = CARTESIAN_POINT('',(83.858072,-131.858235,1.585)); +#132199 = VECTOR('',#132200,1.); +#132200 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#132201 = ORIENTED_EDGE('',*,*,#132202,.T.); +#132202 = EDGE_CURVE('',#132195,#132203,#132205,.T.); +#132203 = VERTEX_POINT('',#132204); +#132204 = CARTESIAN_POINT('',(83.584516,-132.203011,1.585)); +#132205 = LINE('',#132206,#132207); +#132206 = CARTESIAN_POINT('',(83.586041,-131.275312,1.585)); +#132207 = VECTOR('',#132208,1.); +#132208 = DIRECTION('',(-1.643849933588E-03,-0.999998648878,0.)); +#132209 = ORIENTED_EDGE('',*,*,#132210,.T.); +#132210 = EDGE_CURVE('',#132203,#132211,#132213,.T.); +#132211 = VERTEX_POINT('',#132212); +#132212 = CARTESIAN_POINT('',(83.428816,-132.203011,1.585)); +#132213 = CIRCLE('',#132214,7.937510771647E-02); +#132214 = AXIS2_PLACEMENT_3D('',#132215,#132216,#132217); +#132215 = CARTESIAN_POINT('',(83.506666,-132.187526,1.585)); +#132216 = DIRECTION('',(-0.,0.,-1.)); +#132217 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132218 = ORIENTED_EDGE('',*,*,#132219,.T.); +#132219 = EDGE_CURVE('',#132211,#132220,#132222,.T.); +#132220 = VERTEX_POINT('',#132221); +#132221 = CARTESIAN_POINT('',(83.428816,-130.902041,1.585)); +#132222 = LINE('',#132223,#132224); +#132223 = CARTESIAN_POINT('',(83.428816,-132.203011,1.585)); +#132224 = VECTOR('',#132225,1.); +#132225 = DIRECTION('',(0.,1.,0.)); +#132226 = ORIENTED_EDGE('',*,*,#132227,.T.); +#132227 = EDGE_CURVE('',#132220,#132228,#132230,.T.); +#132228 = VERTEX_POINT('',#132229); +#132229 = CARTESIAN_POINT('',(83.578594,-130.883959,1.585)); +#132230 = CIRCLE('',#132231,7.937498694707E-02); +#132231 = AXIS2_PLACEMENT_3D('',#132232,#132233,#132234); +#132232 = CARTESIAN_POINT('',(83.506665897294,-130.9175258972,1.585)); +#132233 = DIRECTION('',(0.,0.,-1.)); +#132234 = DIRECTION('',(-0.980786268925,0.195085352317,0.)); +#132235 = ORIENTED_EDGE('',*,*,#132236,.T.); +#132236 = EDGE_CURVE('',#132228,#132237,#132239,.T.); +#132237 = VERTEX_POINT('',#132238); +#132238 = CARTESIAN_POINT('',(83.929999,-131.63697,1.585)); +#132239 = LINE('',#132240,#132241); +#132240 = CARTESIAN_POINT('',(83.578594,-130.883959,1.585)); +#132241 = VECTOR('',#132242,1.); +#132242 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#132243 = ORIENTED_EDGE('',*,*,#132244,.T.); +#132244 = EDGE_CURVE('',#132237,#132110,#132245,.T.); +#132245 = LINE('',#132246,#132247); +#132246 = CARTESIAN_POINT('',(83.929999,-131.63697,1.585)); +#132247 = VECTOR('',#132248,1.); +#132248 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#132249 = PLANE('',#132250); +#132250 = AXIS2_PLACEMENT_3D('',#132251,#132252,#132253); +#132251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132252 = DIRECTION('',(0.,0.,1.)); +#132253 = DIRECTION('',(1.,0.,-0.)); +#132254 = SHELL_BASED_SURFACE_MODEL('',(#132255)); +#132255 = OPEN_SHELL('',(#132256)); +#132256 = ADVANCED_FACE('',(#132257),#132375,.T.); +#132257 = FACE_BOUND('',#132258,.F.); +#132258 = EDGE_LOOP('',(#132259,#132270,#132278,#132286,#132294,#132303, + #132311,#132320,#132328,#132336,#132344,#132353,#132361,#132369)); +#132259 = ORIENTED_EDGE('',*,*,#132260,.T.); +#132260 = EDGE_CURVE('',#132261,#132263,#132265,.T.); +#132261 = VERTEX_POINT('',#132262); +#132262 = CARTESIAN_POINT('',(84.913997,-130.851528,1.585)); +#132263 = VERTEX_POINT('',#132264); +#132264 = CARTESIAN_POINT('',(85.035945,-130.902041,1.585)); +#132265 = CIRCLE('',#132266,7.937518132318E-02); +#132266 = AXIS2_PLACEMENT_3D('',#132267,#132268,#132269); +#132267 = CARTESIAN_POINT('',(84.958095,-130.9175263772,1.585)); +#132268 = DIRECTION('',(0.,0.,-1.)); +#132269 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#132270 = ORIENTED_EDGE('',*,*,#132271,.T.); +#132271 = EDGE_CURVE('',#132263,#132272,#132274,.T.); +#132272 = VERTEX_POINT('',#132273); +#132273 = CARTESIAN_POINT('',(85.03747,-131.442913,1.585)); +#132274 = LINE('',#132275,#132276); +#132275 = CARTESIAN_POINT('',(85.035945,-130.902041,1.585)); +#132276 = VECTOR('',#132277,1.); +#132277 = DIRECTION('',(2.819509862576E-03,-0.999996025174,0.)); +#132278 = ORIENTED_EDGE('',*,*,#132279,.T.); +#132279 = EDGE_CURVE('',#132272,#132280,#132282,.T.); +#132280 = VERTEX_POINT('',#132281); +#132281 = CARTESIAN_POINT('',(85.604435,-131.442913,1.585)); +#132282 = LINE('',#132283,#132284); +#132283 = CARTESIAN_POINT('',(85.03747,-131.442913,1.585)); +#132284 = VECTOR('',#132285,1.); +#132285 = DIRECTION('',(1.,0.,0.)); +#132286 = ORIENTED_EDGE('',*,*,#132287,.T.); +#132287 = EDGE_CURVE('',#132280,#132288,#132290,.T.); +#132288 = VERTEX_POINT('',#132289); +#132289 = CARTESIAN_POINT('',(85.60596,-130.902041,1.585)); +#132290 = LINE('',#132291,#132292); +#132291 = CARTESIAN_POINT('',(85.604435,-131.442913,1.585)); +#132292 = VECTOR('',#132293,1.); +#132293 = DIRECTION('',(2.819509862576E-03,0.999996025174,0.)); +#132294 = ORIENTED_EDGE('',*,*,#132295,.T.); +#132295 = EDGE_CURVE('',#132288,#132296,#132298,.T.); +#132296 = VERTEX_POINT('',#132297); +#132297 = CARTESIAN_POINT('',(85.76166,-130.902041,1.585)); +#132298 = CIRCLE('',#132299,7.937510771647E-02); +#132299 = AXIS2_PLACEMENT_3D('',#132300,#132301,#132302); +#132300 = CARTESIAN_POINT('',(85.68381,-130.917526,1.585)); +#132301 = DIRECTION('',(0.,0.,-1.)); +#132302 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#132303 = ORIENTED_EDGE('',*,*,#132304,.T.); +#132304 = EDGE_CURVE('',#132296,#132305,#132307,.T.); +#132305 = VERTEX_POINT('',#132306); +#132306 = CARTESIAN_POINT('',(85.76166,-132.203011,1.585)); +#132307 = LINE('',#132308,#132309); +#132308 = CARTESIAN_POINT('',(85.76166,-130.902041,1.585)); +#132309 = VECTOR('',#132310,1.); +#132310 = DIRECTION('',(0.,-1.,0.)); +#132311 = ORIENTED_EDGE('',*,*,#132312,.T.); +#132312 = EDGE_CURVE('',#132305,#132313,#132315,.T.); +#132313 = VERTEX_POINT('',#132314); +#132314 = CARTESIAN_POINT('',(85.60596,-132.203011,1.585)); +#132315 = CIRCLE('',#132316,7.937510771647E-02); +#132316 = AXIS2_PLACEMENT_3D('',#132317,#132318,#132319); +#132317 = CARTESIAN_POINT('',(85.68381,-132.187526,1.585)); +#132318 = DIRECTION('',(-0.,0.,-1.)); +#132319 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132320 = ORIENTED_EDGE('',*,*,#132321,.T.); +#132321 = EDGE_CURVE('',#132313,#132322,#132324,.T.); +#132322 = VERTEX_POINT('',#132323); +#132323 = CARTESIAN_POINT('',(85.604435,-131.601663,1.585)); +#132324 = LINE('',#132325,#132326); +#132325 = CARTESIAN_POINT('',(85.60596,-132.203011,1.585)); +#132326 = VECTOR('',#132327,1.); +#132327 = DIRECTION('',(-2.535961034676E-03,0.999996784446,0.)); +#132328 = ORIENTED_EDGE('',*,*,#132329,.T.); +#132329 = EDGE_CURVE('',#132322,#132330,#132332,.T.); +#132330 = VERTEX_POINT('',#132331); +#132331 = CARTESIAN_POINT('',(85.03747,-131.601663,1.585)); +#132332 = LINE('',#132333,#132334); +#132333 = CARTESIAN_POINT('',(85.604435,-131.601663,1.585)); +#132334 = VECTOR('',#132335,1.); +#132335 = DIRECTION('',(-1.,0.,0.)); +#132336 = ORIENTED_EDGE('',*,*,#132337,.T.); +#132337 = EDGE_CURVE('',#132330,#132338,#132340,.T.); +#132338 = VERTEX_POINT('',#132339); +#132339 = CARTESIAN_POINT('',(85.035945,-132.203011,1.585)); +#132340 = LINE('',#132341,#132342); +#132341 = CARTESIAN_POINT('',(85.03747,-131.601663,1.585)); +#132342 = VECTOR('',#132343,1.); +#132343 = DIRECTION('',(-2.535961034676E-03,-0.999996784446,0.)); +#132344 = ORIENTED_EDGE('',*,*,#132345,.T.); +#132345 = EDGE_CURVE('',#132338,#132346,#132348,.T.); +#132346 = VERTEX_POINT('',#132347); +#132347 = CARTESIAN_POINT('',(84.880245,-132.203011,1.585)); +#132348 = CIRCLE('',#132349,7.937510771647E-02); +#132349 = AXIS2_PLACEMENT_3D('',#132350,#132351,#132352); +#132350 = CARTESIAN_POINT('',(84.958095,-132.187526,1.585)); +#132351 = DIRECTION('',(-0.,0.,-1.)); +#132352 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132353 = ORIENTED_EDGE('',*,*,#132354,.T.); +#132354 = EDGE_CURVE('',#132346,#132355,#132357,.T.); +#132355 = VERTEX_POINT('',#132356); +#132356 = CARTESIAN_POINT('',(84.880245,-130.902041,1.585)); +#132357 = LINE('',#132358,#132359); +#132358 = CARTESIAN_POINT('',(84.880245,-132.203011,1.585)); +#132359 = VECTOR('',#132360,1.); +#132360 = DIRECTION('',(0.,1.,0.)); +#132361 = ORIENTED_EDGE('',*,*,#132362,.T.); +#132362 = EDGE_CURVE('',#132355,#132363,#132365,.T.); +#132363 = VERTEX_POINT('',#132364); +#132364 = CARTESIAN_POINT('',(84.892097,-130.873428,1.585)); +#132365 = LINE('',#132366,#132367); +#132366 = CARTESIAN_POINT('',(84.880245,-130.902041,1.585)); +#132367 = VECTOR('',#132368,1.); +#132368 = DIRECTION('',(0.382686390668,0.923878307137,0.)); +#132369 = ORIENTED_EDGE('',*,*,#132370,.T.); +#132370 = EDGE_CURVE('',#132363,#132261,#132371,.T.); +#132371 = LINE('',#132372,#132373); +#132372 = CARTESIAN_POINT('',(84.892097,-130.873428,1.585)); +#132373 = VECTOR('',#132374,1.); +#132374 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#132375 = PLANE('',#132376); +#132376 = AXIS2_PLACEMENT_3D('',#132377,#132378,#132379); +#132377 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132378 = DIRECTION('',(0.,0.,1.)); +#132379 = DIRECTION('',(1.,0.,-0.)); +#132380 = SHELL_BASED_SURFACE_MODEL('',(#132381)); +#132381 = OPEN_SHELL('',(#132382)); +#132382 = ADVANCED_FACE('',(#132383),#132592,.T.); +#132383 = FACE_BOUND('',#132384,.F.); +#132384 = EDGE_LOOP('',(#132385,#132396,#132404,#132413,#132421,#132429, + #132437,#132445,#132453,#132462,#132470,#132478,#132486,#132494, + #132502,#132511,#132519,#132528,#132536,#132545,#132553,#132561, + #132569,#132578,#132586)); +#132385 = ORIENTED_EDGE('',*,*,#132386,.T.); +#132386 = EDGE_CURVE('',#132387,#132389,#132391,.T.); +#132387 = VERTEX_POINT('',#132388); +#132388 = CARTESIAN_POINT('',(86.152134,-130.995376,1.585)); +#132389 = VERTEX_POINT('',#132390); +#132390 = CARTESIAN_POINT('',(86.152134,-130.839676,1.585)); +#132391 = CIRCLE('',#132392,7.937510771645E-02); +#132392 = AXIS2_PLACEMENT_3D('',#132393,#132394,#132395); +#132393 = CARTESIAN_POINT('',(86.167619,-130.917526,1.585)); +#132394 = DIRECTION('',(0.,0.,-1.)); +#132395 = DIRECTION('',(-0.19508634943,-0.980786070591,-0.)); +#132396 = ORIENTED_EDGE('',*,*,#132397,.T.); +#132397 = EDGE_CURVE('',#132389,#132398,#132400,.T.); +#132398 = VERTEX_POINT('',#132399); +#132399 = CARTESIAN_POINT('',(86.962001,-130.838957,1.585)); +#132400 = LINE('',#132401,#132402); +#132401 = CARTESIAN_POINT('',(86.152134,-130.839676,1.585)); +#132402 = VECTOR('',#132403,1.); +#132403 = DIRECTION('',(0.999999605906,8.877997456989E-04,0.)); +#132404 = ORIENTED_EDGE('',*,*,#132405,.T.); +#132405 = EDGE_CURVE('',#132398,#132406,#132408,.T.); +#132406 = VERTEX_POINT('',#132407); +#132407 = CARTESIAN_POINT('',(87.03166,-130.933011,1.585)); +#132408 = CIRCLE('',#132409,7.881918647195E-02); +#132409 = AXIS2_PLACEMENT_3D('',#132410,#132411,#132412); +#132410 = CARTESIAN_POINT('',(86.954400452492,-130.9174088695,1.585)); +#132411 = DIRECTION('',(0.,0.,-1.)); +#132412 = DIRECTION('',(9.64301694528E-02,0.995339752255,0.)); +#132413 = ORIENTED_EDGE('',*,*,#132414,.T.); +#132414 = EDGE_CURVE('',#132406,#132415,#132417,.T.); +#132415 = VERTEX_POINT('',#132416); +#132416 = CARTESIAN_POINT('',(87.013546,-130.969795,1.585)); +#132417 = LINE('',#132418,#132419); +#132418 = CARTESIAN_POINT('',(87.03166,-130.933011,1.585)); +#132419 = VECTOR('',#132420,1.); +#132420 = DIRECTION('',(-0.441781271633,-0.89712279429,0.)); +#132421 = ORIENTED_EDGE('',*,*,#132422,.T.); +#132422 = EDGE_CURVE('',#132415,#132423,#132425,.T.); +#132423 = VERTEX_POINT('',#132424); +#132424 = CARTESIAN_POINT('',(86.705401,-131.32196,1.585)); +#132425 = LINE('',#132426,#132427); +#132426 = CARTESIAN_POINT('',(87.013546,-130.969795,1.585)); +#132427 = VECTOR('',#132428,1.); +#132428 = DIRECTION('',(-0.658505364328,-0.752576032804,0.)); +#132429 = ORIENTED_EDGE('',*,*,#132430,.T.); +#132430 = EDGE_CURVE('',#132423,#132431,#132433,.T.); +#132431 = VERTEX_POINT('',#132432); +#132432 = CARTESIAN_POINT('',(86.747403,-131.33034,1.585)); +#132433 = LINE('',#132434,#132435); +#132434 = CARTESIAN_POINT('',(86.705401,-131.32196,1.585)); +#132435 = VECTOR('',#132436,1.); +#132436 = DIRECTION('',(0.980672165624,-0.195658129326,0.)); +#132437 = ORIENTED_EDGE('',*,*,#132438,.T.); +#132438 = EDGE_CURVE('',#132431,#132439,#132441,.T.); +#132439 = VERTEX_POINT('',#132440); +#132440 = CARTESIAN_POINT('',(86.882894,-131.400687,1.585)); +#132441 = LINE('',#132442,#132443); +#132442 = CARTESIAN_POINT('',(86.747403,-131.33034,1.585)); +#132443 = VECTOR('',#132444,1.); +#132444 = DIRECTION('',(0.88750704969,-0.460794137061,0.)); +#132445 = ORIENTED_EDGE('',*,*,#132446,.T.); +#132446 = EDGE_CURVE('',#132439,#132447,#132449,.T.); +#132447 = VERTEX_POINT('',#132448); +#132448 = CARTESIAN_POINT('',(86.960132,-131.480124,1.585)); +#132449 = LINE('',#132450,#132451); +#132450 = CARTESIAN_POINT('',(86.882894,-131.400687,1.585)); +#132451 = VECTOR('',#132452,1.); +#132452 = DIRECTION('',(0.697113578041,-0.71696070974,0.)); +#132453 = ORIENTED_EDGE('',*,*,#132454,.T.); +#132454 = EDGE_CURVE('',#132447,#132455,#132457,.T.); +#132455 = VERTEX_POINT('',#132456); +#132456 = CARTESIAN_POINT('',(86.954454,-132.116613,1.585)); +#132457 = CIRCLE('',#132458,0.557296488343); +#132458 = AXIS2_PLACEMENT_3D('',#132459,#132460,#132461); +#132459 = CARTESIAN_POINT('',(86.499827045078,-131.7942875312,1.585)); +#132460 = DIRECTION('',(0.,0.,-1.)); +#132461 = DIRECTION('',(0.825960623385,0.563727814302,0.)); +#132462 = ORIENTED_EDGE('',*,*,#132463,.T.); +#132463 = EDGE_CURVE('',#132455,#132464,#132466,.T.); +#132464 = VERTEX_POINT('',#132465); +#132465 = CARTESIAN_POINT('',(86.875019,-132.193849,1.585)); +#132466 = LINE('',#132467,#132468); +#132467 = CARTESIAN_POINT('',(86.954454,-132.116613,1.585)); +#132468 = VECTOR('',#132469,1.); +#132469 = DIRECTION('',(-0.716960959495,-0.697113321175,0.)); +#132470 = ORIENTED_EDGE('',*,*,#132471,.T.); +#132471 = EDGE_CURVE('',#132464,#132472,#132474,.T.); +#132472 = VERTEX_POINT('',#132473); +#132473 = CARTESIAN_POINT('',(86.72739,-132.265376,1.585)); +#132474 = LINE('',#132475,#132476); +#132475 = CARTESIAN_POINT('',(86.875019,-132.193849,1.585)); +#132476 = VECTOR('',#132477,1.); +#132477 = DIRECTION('',(-0.899935392654,-0.436023266637,0.)); +#132478 = ORIENTED_EDGE('',*,*,#132479,.T.); +#132479 = EDGE_CURVE('',#132472,#132480,#132482,.T.); +#132480 = VERTEX_POINT('',#132481); +#132481 = CARTESIAN_POINT('',(86.328083,-132.264082,1.585)); +#132482 = LINE('',#132483,#132484); +#132483 = CARTESIAN_POINT('',(86.72739,-132.265376,1.585)); +#132484 = VECTOR('',#132485,1.); +#132485 = DIRECTION('',(-0.999994749251,3.240597348736E-03,0.)); +#132486 = ORIENTED_EDGE('',*,*,#132487,.T.); +#132487 = EDGE_CURVE('',#132480,#132488,#132490,.T.); +#132488 = VERTEX_POINT('',#132489); +#132489 = CARTESIAN_POINT('',(86.178055,-132.188172,1.585)); +#132490 = LINE('',#132491,#132492); +#132491 = CARTESIAN_POINT('',(86.328083,-132.264082,1.585)); +#132492 = VECTOR('',#132493,1.); +#132493 = DIRECTION('',(-0.892285461666,0.451471654591,0.)); +#132494 = ORIENTED_EDGE('',*,*,#132495,.T.); +#132495 = EDGE_CURVE('',#132488,#132496,#132498,.T.); +#132496 = VERTEX_POINT('',#132497); +#132497 = CARTESIAN_POINT('',(86.101621,-132.110671,1.585)); +#132498 = LINE('',#132499,#132500); +#132499 = CARTESIAN_POINT('',(86.178055,-132.188172,1.585)); +#132500 = VECTOR('',#132501,1.); +#132501 = DIRECTION('',(-0.702188604259,0.711990985932,0.)); +#132502 = ORIENTED_EDGE('',*,*,#132503,.T.); +#132503 = EDGE_CURVE('',#132496,#132504,#132506,.T.); +#132504 = VERTEX_POINT('',#132505); +#132505 = CARTESIAN_POINT('',(86.211718,-132.000576,1.585)); +#132506 = CIRCLE('',#132507,7.93747707274E-02); +#132507 = AXIS2_PLACEMENT_3D('',#132508,#132509,#132510); +#132508 = CARTESIAN_POINT('',(86.167619049386,-132.0665732482,1.585)); +#132509 = DIRECTION('',(0.,0.,-1.)); +#132510 = DIRECTION('',(-0.831473890019,-0.555563830911,-0.)); +#132511 = ORIENTED_EDGE('',*,*,#132512,.T.); +#132512 = EDGE_CURVE('',#132504,#132513,#132515,.T.); +#132513 = VERTEX_POINT('',#132514); +#132514 = CARTESIAN_POINT('',(86.275114,-132.061816,1.585)); +#132515 = LINE('',#132516,#132517); +#132516 = CARTESIAN_POINT('',(86.211718,-132.000576,1.585)); +#132517 = VECTOR('',#132518,1.); +#132518 = DIRECTION('',(0.719230976915,-0.694771042751,0.)); +#132519 = ORIENTED_EDGE('',*,*,#132520,.T.); +#132520 = EDGE_CURVE('',#132513,#132521,#132523,.T.); +#132521 = VERTEX_POINT('',#132522); +#132522 = CARTESIAN_POINT('',(86.785838,-132.061815,1.585)); +#132523 = CIRCLE('',#132524,0.470261901272); +#132524 = AXIS2_PLACEMENT_3D('',#132525,#132526,#132527); +#132525 = CARTESIAN_POINT('',(86.530475226807,-131.6669275352,1.585)); +#132526 = DIRECTION('',(0.,0.,1.)); +#132527 = DIRECTION('',(-0.543019168928,-0.839720299967,0.)); +#132528 = ORIENTED_EDGE('',*,*,#132529,.T.); +#132529 = EDGE_CURVE('',#132521,#132530,#132532,.T.); +#132530 = VERTEX_POINT('',#132531); +#132531 = CARTESIAN_POINT('',(86.828098,-132.019555,1.585)); +#132532 = LINE('',#132533,#132534); +#132533 = CARTESIAN_POINT('',(86.785838,-132.061815,1.585)); +#132534 = VECTOR('',#132535,1.); +#132535 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#132536 = ORIENTED_EDGE('',*,*,#132537,.T.); +#132537 = EDGE_CURVE('',#132530,#132538,#132540,.T.); +#132538 = VERTEX_POINT('',#132539); +#132539 = CARTESIAN_POINT('',(86.828098,-131.569305,1.585)); +#132540 = CIRCLE('',#132541,0.40312247509); +#132541 = AXIS2_PLACEMENT_3D('',#132542,#132543,#132544); +#132542 = CARTESIAN_POINT('',(86.493693358439,-131.79443,1.585)); +#132543 = DIRECTION('',(0.,-0.,1.)); +#132544 = DIRECTION('',(0.829536089464,-0.558453110187,-0.)); +#132545 = ORIENTED_EDGE('',*,*,#132546,.T.); +#132546 = EDGE_CURVE('',#132538,#132547,#132549,.T.); +#132547 = VERTEX_POINT('',#132548); +#132548 = CARTESIAN_POINT('',(86.785838,-131.527045,1.585)); +#132549 = LINE('',#132550,#132551); +#132550 = CARTESIAN_POINT('',(86.828098,-131.569305,1.585)); +#132551 = VECTOR('',#132552,1.); +#132552 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#132553 = ORIENTED_EDGE('',*,*,#132554,.T.); +#132554 = EDGE_CURVE('',#132547,#132555,#132557,.T.); +#132555 = VERTEX_POINT('',#132556); +#132556 = CARTESIAN_POINT('',(86.693167,-131.48071,1.585)); +#132557 = LINE('',#132558,#132559); +#132558 = CARTESIAN_POINT('',(86.785838,-131.527045,1.585)); +#132559 = VECTOR('',#132560,1.); +#132560 = DIRECTION('',(-0.894429121324,0.447209734831,0.)); +#132561 = ORIENTED_EDGE('',*,*,#132562,.T.); +#132562 = EDGE_CURVE('',#132555,#132563,#132565,.T.); +#132563 = VERTEX_POINT('',#132564); +#132564 = CARTESIAN_POINT('',(86.514991,-131.479185,1.585)); +#132565 = LINE('',#132566,#132567); +#132566 = CARTESIAN_POINT('',(86.693167,-131.48071,1.585)); +#132567 = VECTOR('',#132568,1.); +#132568 = DIRECTION('',(-0.999963374175,8.55863946661E-03,0.)); +#132569 = ORIENTED_EDGE('',*,*,#132570,.T.); +#132570 = EDGE_CURVE('',#132563,#132571,#132573,.T.); +#132571 = VERTEX_POINT('',#132572); +#132572 = CARTESIAN_POINT('',(86.47074,-131.349066,1.585)); +#132573 = CIRCLE('',#132574,7.937553341312E-02); +#132574 = AXIS2_PLACEMENT_3D('',#132575,#132576,#132577); +#132575 = CARTESIAN_POINT('',(86.530476589028,-131.4013346831,1.585)); +#132576 = DIRECTION('',(0.,0.,-1.)); +#132577 = DIRECTION('',(-0.195092723941,-0.980784802628,-0.)); +#132578 = ORIENTED_EDGE('',*,*,#132579,.T.); +#132579 = EDGE_CURVE('',#132571,#132580,#132582,.T.); +#132580 = VERTEX_POINT('',#132581); +#132581 = CARTESIAN_POINT('',(86.778885,-130.996901,1.585)); +#132582 = LINE('',#132583,#132584); +#132583 = CARTESIAN_POINT('',(86.47074,-131.349066,1.585)); +#132584 = VECTOR('',#132585,1.); +#132585 = DIRECTION('',(0.658505364328,0.752576032804,0.)); +#132586 = ORIENTED_EDGE('',*,*,#132587,.T.); +#132587 = EDGE_CURVE('',#132580,#132387,#132588,.T.); +#132588 = LINE('',#132589,#132590); +#132589 = CARTESIAN_POINT('',(86.778885,-130.996901,1.585)); +#132590 = VECTOR('',#132591,1.); +#132591 = DIRECTION('',(-0.999997039823,2.433175991335E-03,0.)); +#132592 = PLANE('',#132593); +#132593 = AXIS2_PLACEMENT_3D('',#132594,#132595,#132596); +#132594 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132595 = DIRECTION('',(0.,0.,1.)); +#132596 = DIRECTION('',(1.,0.,-0.)); +#132597 = SHELL_BASED_SURFACE_MODEL('',(#132598)); +#132598 = OPEN_SHELL('',(#132599)); +#132599 = ADVANCED_FACE('',(#132600),#132802,.T.); +#132600 = FACE_BOUND('',#132601,.F.); +#132601 = EDGE_LOOP('',(#132602,#132613,#132621,#132629,#132637,#132645, + #132654,#132662,#132671,#132679,#132688,#132696,#132705,#132713, + #132722,#132730,#132739,#132747,#132755,#132763,#132772,#132780, + #132788,#132796)); +#132602 = ORIENTED_EDGE('',*,*,#132603,.T.); +#132603 = EDGE_CURVE('',#132604,#132606,#132608,.T.); +#132604 = VERTEX_POINT('',#132605); +#132605 = CARTESIAN_POINT('',(125.200369,-131.742486,1.585)); +#132606 = VERTEX_POINT('',#132607); +#132607 = CARTESIAN_POINT('',(125.419225,-131.523629,1.585)); +#132608 = CIRCLE('',#132609,0.308109459502); +#132609 = AXIS2_PLACEMENT_3D('',#132610,#132611,#132612); +#132610 = CARTESIAN_POINT('',(125.49818845359,-131.8214480927,1.585)); +#132611 = DIRECTION('',(0.,0.,-1.)); +#132612 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#132613 = ORIENTED_EDGE('',*,*,#132614,.T.); +#132614 = EDGE_CURVE('',#132606,#132615,#132617,.T.); +#132615 = VERTEX_POINT('',#132616); +#132616 = CARTESIAN_POINT('',(125.651361,-131.521349,1.585)); +#132617 = LINE('',#132618,#132619); +#132618 = CARTESIAN_POINT('',(125.419225,-131.523629,1.585)); +#132619 = VECTOR('',#132620,1.); +#132620 = DIRECTION('',(0.999951769331,9.821354869939E-03,0.)); +#132621 = ORIENTED_EDGE('',*,*,#132622,.T.); +#132622 = EDGE_CURVE('',#132615,#132623,#132625,.T.); +#132623 = VERTEX_POINT('',#132624); +#132624 = CARTESIAN_POINT('',(125.677237,-131.527576,1.585)); +#132625 = LINE('',#132626,#132627); +#132626 = CARTESIAN_POINT('',(125.651361,-131.521349,1.585)); +#132627 = VECTOR('',#132628,1.); +#132628 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#132629 = ORIENTED_EDGE('',*,*,#132630,.T.); +#132630 = EDGE_CURVE('',#132623,#132631,#132633,.T.); +#132631 = VERTEX_POINT('',#132632); +#132632 = CARTESIAN_POINT('',(125.779844,-131.582609,1.585)); +#132633 = LINE('',#132634,#132635); +#132634 = CARTESIAN_POINT('',(125.677237,-131.527576,1.585)); +#132635 = VECTOR('',#132636,1.); +#132636 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#132637 = ORIENTED_EDGE('',*,*,#132638,.T.); +#132638 = EDGE_CURVE('',#132631,#132639,#132641,.T.); +#132639 = VERTEX_POINT('',#132640); +#132640 = CARTESIAN_POINT('',(125.834878,-131.64236,1.585)); +#132641 = LINE('',#132642,#132643); +#132642 = CARTESIAN_POINT('',(125.779844,-131.582609,1.585)); +#132643 = VECTOR('',#132644,1.); +#132644 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#132645 = ORIENTED_EDGE('',*,*,#132646,.T.); +#132646 = EDGE_CURVE('',#132639,#132647,#132649,.T.); +#132647 = VERTEX_POINT('',#132648); +#132648 = CARTESIAN_POINT('',(125.828491,-132.09444,1.585)); +#132649 = CIRCLE('',#132650,0.407997408492); +#132650 = AXIS2_PLACEMENT_3D('',#132651,#132652,#132653); +#132651 = CARTESIAN_POINT('',(125.4920750414,-131.8636019872,1.585)); +#132652 = DIRECTION('',(0.,0.,-1.)); +#132653 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#132654 = ORIENTED_EDGE('',*,*,#132655,.T.); +#132655 = EDGE_CURVE('',#132647,#132656,#132658,.T.); +#132656 = VERTEX_POINT('',#132657); +#132657 = CARTESIAN_POINT('',(125.779843,-132.145962,1.585)); +#132658 = LINE('',#132659,#132660); +#132659 = CARTESIAN_POINT('',(125.828491,-132.09444,1.585)); +#132660 = VECTOR('',#132661,1.); +#132661 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#132662 = ORIENTED_EDGE('',*,*,#132663,.T.); +#132663 = EDGE_CURVE('',#132656,#132664,#132666,.T.); +#132664 = VERTEX_POINT('',#132665); +#132665 = CARTESIAN_POINT('',(125.687921,-132.054038,1.585)); +#132666 = CIRCLE('',#132667,6.499937665136E-02); +#132667 = AXIS2_PLACEMENT_3D('',#132668,#132669,#132670); +#132668 = CARTESIAN_POINT('',(125.73388218097,-132.099999819,1.585)); +#132669 = DIRECTION('',(-0.,0.,-1.)); +#132670 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#132671 = ORIENTED_EDGE('',*,*,#132672,.T.); +#132672 = EDGE_CURVE('',#132664,#132673,#132675,.T.); +#132673 = VERTEX_POINT('',#132674); +#132674 = CARTESIAN_POINT('',(125.723319,-132.01864,1.585)); +#132675 = LINE('',#132676,#132677); +#132676 = CARTESIAN_POINT('',(125.687921,-132.054038,1.585)); +#132677 = VECTOR('',#132678,1.); +#132678 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#132679 = ORIENTED_EDGE('',*,*,#132680,.T.); +#132680 = EDGE_CURVE('',#132673,#132681,#132683,.T.); +#132681 = VERTEX_POINT('',#132682); +#132682 = CARTESIAN_POINT('',(125.723319,-131.709932,1.585)); +#132683 = CIRCLE('',#132684,0.277419178293); +#132684 = AXIS2_PLACEMENT_3D('',#132685,#132686,#132687); +#132685 = CARTESIAN_POINT('',(125.492806,-131.864286,1.585)); +#132686 = DIRECTION('',(0.,-0.,1.)); +#132687 = DIRECTION('',(0.830919482272,-0.556392679661,-0.)); +#132688 = ORIENTED_EDGE('',*,*,#132689,.T.); +#132689 = EDGE_CURVE('',#132681,#132690,#132692,.T.); +#132690 = VERTEX_POINT('',#132691); +#132691 = CARTESIAN_POINT('',(125.695379,-131.681992,1.585)); +#132692 = LINE('',#132693,#132694); +#132693 = CARTESIAN_POINT('',(125.723319,-131.709932,1.585)); +#132694 = VECTOR('',#132695,1.); +#132695 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#132696 = ORIENTED_EDGE('',*,*,#132697,.T.); +#132697 = EDGE_CURVE('',#132690,#132698,#132700,.T.); +#132698 = VERTEX_POINT('',#132699); +#132699 = CARTESIAN_POINT('',(125.386671,-131.681992,1.585)); +#132700 = CIRCLE('',#132701,0.277419178293); +#132701 = AXIS2_PLACEMENT_3D('',#132702,#132703,#132704); +#132702 = CARTESIAN_POINT('',(125.541025,-131.912505,1.585)); +#132703 = DIRECTION('',(0.,0.,1.)); +#132704 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#132705 = ORIENTED_EDGE('',*,*,#132706,.T.); +#132706 = EDGE_CURVE('',#132698,#132707,#132709,.T.); +#132707 = VERTEX_POINT('',#132708); +#132708 = CARTESIAN_POINT('',(125.358733,-131.70993,1.585)); +#132709 = LINE('',#132710,#132711); +#132710 = CARTESIAN_POINT('',(125.386671,-131.681992,1.585)); +#132711 = VECTOR('',#132712,1.); +#132712 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#132713 = ORIENTED_EDGE('',*,*,#132714,.T.); +#132714 = EDGE_CURVE('',#132707,#132715,#132717,.T.); +#132715 = VERTEX_POINT('',#132716); +#132716 = CARTESIAN_POINT('',(125.358732,-132.01864,1.585)); +#132717 = CIRCLE('',#132718,0.277420975587); +#132718 = AXIS2_PLACEMENT_3D('',#132719,#132720,#132721); +#132719 = CARTESIAN_POINT('',(125.5892469934,-131.8642857467,1.585)); +#132720 = DIRECTION('',(0.,0.,1.)); +#132721 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#132722 = ORIENTED_EDGE('',*,*,#132723,.T.); +#132723 = EDGE_CURVE('',#132715,#132724,#132726,.T.); +#132724 = VERTEX_POINT('',#132725); +#132725 = CARTESIAN_POINT('',(125.39413,-132.054038,1.585)); +#132726 = LINE('',#132727,#132728); +#132727 = CARTESIAN_POINT('',(125.358732,-132.01864,1.585)); +#132728 = VECTOR('',#132729,1.); +#132729 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#132730 = ORIENTED_EDGE('',*,*,#132731,.T.); +#132731 = EDGE_CURVE('',#132724,#132732,#132734,.T.); +#132732 = VERTEX_POINT('',#132733); +#132733 = CARTESIAN_POINT('',(125.341701,-132.164677,1.585)); +#132734 = CIRCLE('',#132735,6.49998003212E-02); +#132735 = AXIS2_PLACEMENT_3D('',#132736,#132737,#132738); +#132736 = CARTESIAN_POINT('',(125.34816812219,-132.0999997213,1.585)); +#132737 = DIRECTION('',(0.,0.,-1.)); +#132738 = DIRECTION('',(0.707107984623,0.707105577748,0.)); +#132739 = ORIENTED_EDGE('',*,*,#132740,.T.); +#132740 = EDGE_CURVE('',#132732,#132741,#132743,.T.); +#132741 = VERTEX_POINT('',#132742); +#132742 = CARTESIAN_POINT('',(124.894723,-132.117195,1.585)); +#132743 = LINE('',#132744,#132745); +#132744 = CARTESIAN_POINT('',(125.341701,-132.164677,1.585)); +#132745 = VECTOR('',#132746,1.); +#132746 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#132747 = ORIENTED_EDGE('',*,*,#132748,.T.); +#132748 = EDGE_CURVE('',#132741,#132749,#132751,.T.); +#132749 = VERTEX_POINT('',#132750); +#132750 = CARTESIAN_POINT('',(124.857368,-132.075918,1.585)); +#132751 = LINE('',#132752,#132753); +#132752 = CARTESIAN_POINT('',(124.894723,-132.117195,1.585)); +#132753 = VECTOR('',#132754,1.); +#132754 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#132755 = ORIENTED_EDGE('',*,*,#132756,.T.); +#132756 = EDGE_CURVE('',#132749,#132757,#132759,.T.); +#132757 = VERTEX_POINT('',#132758); +#132758 = CARTESIAN_POINT('',(124.854597,-131.628571,1.585)); +#132759 = LINE('',#132760,#132761); +#132760 = CARTESIAN_POINT('',(124.857368,-132.075918,1.585)); +#132761 = VECTOR('',#132762,1.); +#132762 = DIRECTION('',(-6.194177765461E-03,0.999980815897,0.)); +#132763 = ORIENTED_EDGE('',*,*,#132764,.T.); +#132764 = EDGE_CURVE('',#132757,#132765,#132767,.T.); +#132765 = VERTEX_POINT('',#132766); +#132766 = CARTESIAN_POINT('',(124.984597,-131.628571,1.585)); +#132767 = CIRCLE('',#132768,6.500000000092E-02); +#132768 = AXIS2_PLACEMENT_3D('',#132769,#132770,#132771); +#132769 = CARTESIAN_POINT('',(124.919597,-131.6285713448,1.585)); +#132770 = DIRECTION('',(0.,0.,-1.)); +#132771 = DIRECTION('',(-0.999999999986,5.305658462925E-06,0.)); +#132772 = ORIENTED_EDGE('',*,*,#132773,.T.); +#132773 = EDGE_CURVE('',#132765,#132774,#132776,.T.); +#132774 = VERTEX_POINT('',#132775); +#132775 = CARTESIAN_POINT('',(124.984597,-131.998319,1.585)); +#132776 = LINE('',#132777,#132778); +#132777 = CARTESIAN_POINT('',(124.984597,-131.628571,1.585)); +#132778 = VECTOR('',#132779,1.); +#132779 = DIRECTION('',(0.,-1.,0.)); +#132780 = ORIENTED_EDGE('',*,*,#132781,.T.); +#132781 = EDGE_CURVE('',#132774,#132782,#132784,.T.); +#132782 = VERTEX_POINT('',#132783); +#132783 = CARTESIAN_POINT('',(125.214733,-132.021332,1.585)); +#132784 = LINE('',#132785,#132786); +#132785 = CARTESIAN_POINT('',(124.984597,-131.998319,1.585)); +#132786 = VECTOR('',#132787,1.); +#132787 = DIRECTION('',(0.99503744706,-9.950115049005E-02,0.)); +#132788 = ORIENTED_EDGE('',*,*,#132789,.T.); +#132789 = EDGE_CURVE('',#132782,#132790,#132792,.T.); +#132790 = VERTEX_POINT('',#132791); +#132791 = CARTESIAN_POINT('',(125.197618,-131.976037,1.585)); +#132792 = LINE('',#132793,#132794); +#132793 = CARTESIAN_POINT('',(125.214733,-132.021332,1.585)); +#132794 = VECTOR('',#132795,1.); +#132795 = DIRECTION('',(-0.353464827547,0.935447815587,0.)); +#132796 = ORIENTED_EDGE('',*,*,#132797,.T.); +#132797 = EDGE_CURVE('',#132790,#132604,#132798,.T.); +#132798 = LINE('',#132799,#132800); +#132799 = CARTESIAN_POINT('',(125.197618,-131.976037,1.585)); +#132800 = VECTOR('',#132801,1.); +#132801 = DIRECTION('',(1.177819480941E-02,0.999930634658,0.)); +#132802 = PLANE('',#132803); +#132803 = AXIS2_PLACEMENT_3D('',#132804,#132805,#132806); +#132804 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132805 = DIRECTION('',(0.,0.,1.)); +#132806 = DIRECTION('',(1.,0.,-0.)); +#132807 = SHELL_BASED_SURFACE_MODEL('',(#132808)); +#132808 = OPEN_SHELL('',(#132809)); +#132809 = ADVANCED_FACE('',(#132810),#132953,.T.); +#132810 = FACE_BOUND('',#132811,.F.); +#132811 = EDGE_LOOP('',(#132812,#132822,#132830,#132838,#132847,#132855, + #132863,#132872,#132880,#132888,#132897,#132905,#132913,#132922, + #132930,#132939,#132947)); +#132812 = ORIENTED_EDGE('',*,*,#132813,.T.); +#132813 = EDGE_CURVE('',#132814,#132816,#132818,.T.); +#132814 = VERTEX_POINT('',#132815); +#132815 = CARTESIAN_POINT('',(210.289335,-130.720572,1.585)); +#132816 = VERTEX_POINT('',#132817); +#132817 = CARTESIAN_POINT('',(210.312175,-130.699656,1.585)); +#132818 = LINE('',#132819,#132820); +#132819 = CARTESIAN_POINT('',(210.289335,-130.720572,1.585)); +#132820 = VECTOR('',#132821,1.); +#132821 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#132822 = ORIENTED_EDGE('',*,*,#132823,.T.); +#132823 = EDGE_CURVE('',#132816,#132824,#132826,.T.); +#132824 = VERTEX_POINT('',#132825); +#132825 = CARTESIAN_POINT('',(210.341282,-130.689071,1.585)); +#132826 = LINE('',#132827,#132828); +#132827 = CARTESIAN_POINT('',(210.312175,-130.699656,1.585)); +#132828 = VECTOR('',#132829,1.); +#132829 = DIRECTION('',(0.939786824446,0.341761209907,0.)); +#132830 = ORIENTED_EDGE('',*,*,#132831,.T.); +#132831 = EDGE_CURVE('',#132824,#132832,#132834,.T.); +#132832 = VERTEX_POINT('',#132833); +#132833 = CARTESIAN_POINT('',(210.355046,-130.689676,1.585)); +#132834 = LINE('',#132835,#132836); +#132835 = CARTESIAN_POINT('',(210.341282,-130.689071,1.585)); +#132836 = VECTOR('',#132837,1.); +#132837 = DIRECTION('',(0.99903536577,-4.39128448322E-02,0.)); +#132838 = ORIENTED_EDGE('',*,*,#132839,.T.); +#132839 = EDGE_CURVE('',#132832,#132840,#132842,.T.); +#132840 = VERTEX_POINT('',#132841); +#132841 = CARTESIAN_POINT('',(210.425908,-130.739307,1.585)); +#132842 = CIRCLE('',#132843,7.786403695722E-02); +#132843 = AXIS2_PLACEMENT_3D('',#132844,#132845,#132846); +#132844 = CARTESIAN_POINT('',(210.3533355224,-130.7675212472,1.585)); +#132845 = DIRECTION('',(0.,0.,-1.)); +#132846 = DIRECTION('',(2.196749179824E-02,0.999758685536,0.)); +#132847 = ORIENTED_EDGE('',*,*,#132848,.T.); +#132848 = EDGE_CURVE('',#132840,#132849,#132851,.T.); +#132849 = VERTEX_POINT('',#132850); +#132850 = CARTESIAN_POINT('',(210.432708,-130.767526,1.585)); +#132851 = LINE('',#132852,#132853); +#132852 = CARTESIAN_POINT('',(210.425908,-130.739307,1.585)); +#132853 = VECTOR('',#132854,1.); +#132854 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#132855 = ORIENTED_EDGE('',*,*,#132856,.T.); +#132856 = EDGE_CURVE('',#132849,#132857,#132859,.T.); +#132857 = VERTEX_POINT('',#132858); +#132858 = CARTESIAN_POINT('',(210.431183,-132.053011,1.585)); +#132859 = LINE('',#132860,#132861); +#132860 = CARTESIAN_POINT('',(210.432708,-130.767526,1.585)); +#132861 = VECTOR('',#132862,1.); +#132862 = DIRECTION('',(-1.186321837186E-03,-0.99999929632,0.)); +#132863 = ORIENTED_EDGE('',*,*,#132864,.T.); +#132864 = EDGE_CURVE('',#132857,#132865,#132867,.T.); +#132865 = VERTEX_POINT('',#132866); +#132866 = CARTESIAN_POINT('',(210.275483,-132.053011,1.585)); +#132867 = CIRCLE('',#132868,7.937510771645E-02); +#132868 = AXIS2_PLACEMENT_3D('',#132869,#132870,#132871); +#132869 = CARTESIAN_POINT('',(210.353333,-132.037526,1.585)); +#132870 = DIRECTION('',(-0.,0.,-1.)); +#132871 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132872 = ORIENTED_EDGE('',*,*,#132873,.T.); +#132873 = EDGE_CURVE('',#132865,#132874,#132876,.T.); +#132874 = VERTEX_POINT('',#132875); +#132875 = CARTESIAN_POINT('',(210.273958,-131.125314,1.585)); +#132876 = LINE('',#132877,#132878); +#132877 = CARTESIAN_POINT('',(210.275483,-132.053011,1.585)); +#132878 = VECTOR('',#132879,1.); +#132879 = DIRECTION('',(-1.643853477531E-03,0.999998648872,0.)); +#132880 = ORIENTED_EDGE('',*,*,#132881,.T.); +#132881 = EDGE_CURVE('',#132874,#132882,#132884,.T.); +#132882 = VERTEX_POINT('',#132883); +#132883 = CARTESIAN_POINT('',(209.993998,-131.721623,1.585)); +#132884 = LINE('',#132885,#132886); +#132885 = CARTESIAN_POINT('',(210.273958,-131.125314,1.585)); +#132886 = VECTOR('',#132887,1.); +#132887 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#132888 = ORIENTED_EDGE('',*,*,#132889,.T.); +#132889 = EDGE_CURVE('',#132882,#132890,#132892,.T.); +#132890 = VERTEX_POINT('',#132891); +#132891 = CARTESIAN_POINT('',(209.858072,-131.708235,1.585)); +#132892 = CIRCLE('',#132893,7.937464557818E-02); +#132893 = AXIS2_PLACEMENT_3D('',#132894,#132895,#132896); +#132894 = CARTESIAN_POINT('',(209.93000035502,-131.6746694506,1.585)); +#132895 = DIRECTION('',(-0.,0.,-1.)); +#132896 = DIRECTION('',(0.806273143148,-0.591543420755,-0.)); +#132897 = ORIENTED_EDGE('',*,*,#132898,.T.); +#132898 = EDGE_CURVE('',#132890,#132899,#132901,.T.); +#132899 = VERTEX_POINT('',#132900); +#132900 = CARTESIAN_POINT('',(209.586041,-131.125312,1.585)); +#132901 = LINE('',#132902,#132903); +#132902 = CARTESIAN_POINT('',(209.858072,-131.708235,1.585)); +#132903 = VECTOR('',#132904,1.); +#132904 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#132905 = ORIENTED_EDGE('',*,*,#132906,.T.); +#132906 = EDGE_CURVE('',#132899,#132907,#132909,.T.); +#132907 = VERTEX_POINT('',#132908); +#132908 = CARTESIAN_POINT('',(209.584516,-132.053011,1.585)); +#132909 = LINE('',#132910,#132911); +#132910 = CARTESIAN_POINT('',(209.586041,-131.125312,1.585)); +#132911 = VECTOR('',#132912,1.); +#132912 = DIRECTION('',(-1.643849933573E-03,-0.999998648878,0.)); +#132913 = ORIENTED_EDGE('',*,*,#132914,.T.); +#132914 = EDGE_CURVE('',#132907,#132915,#132917,.T.); +#132915 = VERTEX_POINT('',#132916); +#132916 = CARTESIAN_POINT('',(209.428816,-132.053011,1.585)); +#132917 = CIRCLE('',#132918,7.937510771647E-02); +#132918 = AXIS2_PLACEMENT_3D('',#132919,#132920,#132921); +#132919 = CARTESIAN_POINT('',(209.506666,-132.037526,1.585)); +#132920 = DIRECTION('',(-0.,0.,-1.)); +#132921 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#132922 = ORIENTED_EDGE('',*,*,#132923,.T.); +#132923 = EDGE_CURVE('',#132915,#132924,#132926,.T.); +#132924 = VERTEX_POINT('',#132925); +#132925 = CARTESIAN_POINT('',(209.428816,-130.752041,1.585)); +#132926 = LINE('',#132927,#132928); +#132927 = CARTESIAN_POINT('',(209.428816,-132.053011,1.585)); +#132928 = VECTOR('',#132929,1.); +#132929 = DIRECTION('',(0.,1.,0.)); +#132930 = ORIENTED_EDGE('',*,*,#132931,.T.); +#132931 = EDGE_CURVE('',#132924,#132932,#132934,.T.); +#132932 = VERTEX_POINT('',#132933); +#132933 = CARTESIAN_POINT('',(209.578594,-130.733959,1.585)); +#132934 = CIRCLE('',#132935,7.937498694707E-02); +#132935 = AXIS2_PLACEMENT_3D('',#132936,#132937,#132938); +#132936 = CARTESIAN_POINT('',(209.50666589729,-130.7675258972,1.585)); +#132937 = DIRECTION('',(0.,0.,-1.)); +#132938 = DIRECTION('',(-0.980786268925,0.195085352317,0.)); +#132939 = ORIENTED_EDGE('',*,*,#132940,.T.); +#132940 = EDGE_CURVE('',#132932,#132941,#132943,.T.); +#132941 = VERTEX_POINT('',#132942); +#132942 = CARTESIAN_POINT('',(209.929999,-131.48697,1.585)); +#132943 = LINE('',#132944,#132945); +#132944 = CARTESIAN_POINT('',(209.578594,-130.733959,1.585)); +#132945 = VECTOR('',#132946,1.); +#132946 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#132947 = ORIENTED_EDGE('',*,*,#132948,.T.); +#132948 = EDGE_CURVE('',#132941,#132814,#132949,.T.); +#132949 = LINE('',#132950,#132951); +#132950 = CARTESIAN_POINT('',(209.929999,-131.48697,1.585)); +#132951 = VECTOR('',#132952,1.); +#132952 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#132953 = PLANE('',#132954); +#132954 = AXIS2_PLACEMENT_3D('',#132955,#132956,#132957); +#132955 = CARTESIAN_POINT('',(0.,0.,1.585)); +#132956 = DIRECTION('',(0.,0.,1.)); +#132957 = DIRECTION('',(1.,0.,-0.)); +#132958 = SHELL_BASED_SURFACE_MODEL('',(#132959)); +#132959 = OPEN_SHELL('',(#132960)); +#132960 = ADVANCED_FACE('',(#132961),#133079,.T.); +#132961 = FACE_BOUND('',#132962,.F.); +#132962 = EDGE_LOOP('',(#132963,#132974,#132982,#132990,#132998,#133007, + #133015,#133024,#133032,#133040,#133048,#133057,#133065,#133073)); +#132963 = ORIENTED_EDGE('',*,*,#132964,.T.); +#132964 = EDGE_CURVE('',#132965,#132967,#132969,.T.); +#132965 = VERTEX_POINT('',#132966); +#132966 = CARTESIAN_POINT('',(210.913997,-130.701528,1.585)); +#132967 = VERTEX_POINT('',#132968); +#132968 = CARTESIAN_POINT('',(211.035945,-130.752041,1.585)); +#132969 = CIRCLE('',#132970,7.937518132319E-02); +#132970 = AXIS2_PLACEMENT_3D('',#132971,#132972,#132973); +#132971 = CARTESIAN_POINT('',(210.958095,-130.7675263772,1.585)); +#132972 = DIRECTION('',(0.,0.,-1.)); +#132973 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#132974 = ORIENTED_EDGE('',*,*,#132975,.T.); +#132975 = EDGE_CURVE('',#132967,#132976,#132978,.T.); +#132976 = VERTEX_POINT('',#132977); +#132977 = CARTESIAN_POINT('',(211.03747,-131.292913,1.585)); +#132978 = LINE('',#132979,#132980); +#132979 = CARTESIAN_POINT('',(211.035945,-130.752041,1.585)); +#132980 = VECTOR('',#132981,1.); +#132981 = DIRECTION('',(2.819509862603E-03,-0.999996025174,0.)); +#132982 = ORIENTED_EDGE('',*,*,#132983,.T.); +#132983 = EDGE_CURVE('',#132976,#132984,#132986,.T.); +#132984 = VERTEX_POINT('',#132985); +#132985 = CARTESIAN_POINT('',(211.604435,-131.292913,1.585)); +#132986 = LINE('',#132987,#132988); +#132987 = CARTESIAN_POINT('',(211.03747,-131.292913,1.585)); +#132988 = VECTOR('',#132989,1.); +#132989 = DIRECTION('',(1.,0.,0.)); +#132990 = ORIENTED_EDGE('',*,*,#132991,.T.); +#132991 = EDGE_CURVE('',#132984,#132992,#132994,.T.); +#132992 = VERTEX_POINT('',#132993); +#132993 = CARTESIAN_POINT('',(211.60596,-130.752041,1.585)); +#132994 = LINE('',#132995,#132996); +#132995 = CARTESIAN_POINT('',(211.604435,-131.292913,1.585)); +#132996 = VECTOR('',#132997,1.); +#132997 = DIRECTION('',(2.819509862603E-03,0.999996025174,0.)); +#132998 = ORIENTED_EDGE('',*,*,#132999,.T.); +#132999 = EDGE_CURVE('',#132992,#133000,#133002,.T.); +#133000 = VERTEX_POINT('',#133001); +#133001 = CARTESIAN_POINT('',(211.76166,-130.752041,1.585)); +#133002 = CIRCLE('',#133003,7.937510771645E-02); +#133003 = AXIS2_PLACEMENT_3D('',#133004,#133005,#133006); +#133004 = CARTESIAN_POINT('',(211.68381,-130.767526,1.585)); +#133005 = DIRECTION('',(0.,0.,-1.)); +#133006 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#133007 = ORIENTED_EDGE('',*,*,#133008,.T.); +#133008 = EDGE_CURVE('',#133000,#133009,#133011,.T.); +#133009 = VERTEX_POINT('',#133010); +#133010 = CARTESIAN_POINT('',(211.76166,-132.053011,1.585)); +#133011 = LINE('',#133012,#133013); +#133012 = CARTESIAN_POINT('',(211.76166,-130.752041,1.585)); +#133013 = VECTOR('',#133014,1.); +#133014 = DIRECTION('',(0.,-1.,0.)); +#133015 = ORIENTED_EDGE('',*,*,#133016,.T.); +#133016 = EDGE_CURVE('',#133009,#133017,#133019,.T.); +#133017 = VERTEX_POINT('',#133018); +#133018 = CARTESIAN_POINT('',(211.60596,-132.053011,1.585)); +#133019 = CIRCLE('',#133020,7.937510771647E-02); +#133020 = AXIS2_PLACEMENT_3D('',#133021,#133022,#133023); +#133021 = CARTESIAN_POINT('',(211.68381,-132.037526,1.585)); +#133022 = DIRECTION('',(-0.,0.,-1.)); +#133023 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#133024 = ORIENTED_EDGE('',*,*,#133025,.T.); +#133025 = EDGE_CURVE('',#133017,#133026,#133028,.T.); +#133026 = VERTEX_POINT('',#133027); +#133027 = CARTESIAN_POINT('',(211.604435,-131.451663,1.585)); +#133028 = LINE('',#133029,#133030); +#133029 = CARTESIAN_POINT('',(211.60596,-132.053011,1.585)); +#133030 = VECTOR('',#133031,1.); +#133031 = DIRECTION('',(-2.5359610347E-03,0.999996784446,0.)); +#133032 = ORIENTED_EDGE('',*,*,#133033,.T.); +#133033 = EDGE_CURVE('',#133026,#133034,#133036,.T.); +#133034 = VERTEX_POINT('',#133035); +#133035 = CARTESIAN_POINT('',(211.03747,-131.451663,1.585)); +#133036 = LINE('',#133037,#133038); +#133037 = CARTESIAN_POINT('',(211.604435,-131.451663,1.585)); +#133038 = VECTOR('',#133039,1.); +#133039 = DIRECTION('',(-1.,0.,0.)); +#133040 = ORIENTED_EDGE('',*,*,#133041,.T.); +#133041 = EDGE_CURVE('',#133034,#133042,#133044,.T.); +#133042 = VERTEX_POINT('',#133043); +#133043 = CARTESIAN_POINT('',(211.035945,-132.053011,1.585)); +#133044 = LINE('',#133045,#133046); +#133045 = CARTESIAN_POINT('',(211.03747,-131.451663,1.585)); +#133046 = VECTOR('',#133047,1.); +#133047 = DIRECTION('',(-2.5359610347E-03,-0.999996784446,0.)); +#133048 = ORIENTED_EDGE('',*,*,#133049,.T.); +#133049 = EDGE_CURVE('',#133042,#133050,#133052,.T.); +#133050 = VERTEX_POINT('',#133051); +#133051 = CARTESIAN_POINT('',(210.880245,-132.053011,1.585)); +#133052 = CIRCLE('',#133053,7.937510771645E-02); +#133053 = AXIS2_PLACEMENT_3D('',#133054,#133055,#133056); +#133054 = CARTESIAN_POINT('',(210.958095,-132.037526,1.585)); +#133055 = DIRECTION('',(-0.,0.,-1.)); +#133056 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#133057 = ORIENTED_EDGE('',*,*,#133058,.T.); +#133058 = EDGE_CURVE('',#133050,#133059,#133061,.T.); +#133059 = VERTEX_POINT('',#133060); +#133060 = CARTESIAN_POINT('',(210.880245,-130.752041,1.585)); +#133061 = LINE('',#133062,#133063); +#133062 = CARTESIAN_POINT('',(210.880245,-132.053011,1.585)); +#133063 = VECTOR('',#133064,1.); +#133064 = DIRECTION('',(0.,1.,0.)); +#133065 = ORIENTED_EDGE('',*,*,#133066,.T.); +#133066 = EDGE_CURVE('',#133059,#133067,#133069,.T.); +#133067 = VERTEX_POINT('',#133068); +#133068 = CARTESIAN_POINT('',(210.892097,-130.723428,1.585)); +#133069 = LINE('',#133070,#133071); +#133070 = CARTESIAN_POINT('',(210.880245,-130.752041,1.585)); +#133071 = VECTOR('',#133072,1.); +#133072 = DIRECTION('',(0.382686390668,0.923878307136,0.)); +#133073 = ORIENTED_EDGE('',*,*,#133074,.T.); +#133074 = EDGE_CURVE('',#133067,#132965,#133075,.T.); +#133075 = LINE('',#133076,#133077); +#133076 = CARTESIAN_POINT('',(210.892097,-130.723428,1.585)); +#133077 = VECTOR('',#133078,1.); +#133078 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#133079 = PLANE('',#133080); +#133080 = AXIS2_PLACEMENT_3D('',#133081,#133082,#133083); +#133081 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133082 = DIRECTION('',(0.,0.,1.)); +#133083 = DIRECTION('',(1.,0.,-0.)); +#133084 = SHELL_BASED_SURFACE_MODEL('',(#133085)); +#133085 = OPEN_SHELL('',(#133086)); +#133086 = ADVANCED_FACE('',(#133087),#133222,.T.); +#133087 = FACE_BOUND('',#133088,.F.); +#133088 = EDGE_LOOP('',(#133089,#133100,#133108,#133116,#133124,#133133, + #133141,#133149,#133158,#133166,#133174,#133183,#133191,#133199, + #133208,#133216)); +#133089 = ORIENTED_EDGE('',*,*,#133090,.T.); +#133090 = EDGE_CURVE('',#133091,#133093,#133095,.T.); +#133091 = VERTEX_POINT('',#133092); +#133092 = CARTESIAN_POINT('',(212.48181,-130.644344,1.585)); +#133093 = VERTEX_POINT('',#133094); +#133094 = CARTESIAN_POINT('',(212.609228,-130.716978,1.585)); +#133095 = CIRCLE('',#133096,7.93753763862E-02); +#133096 = AXIS2_PLACEMENT_3D('',#133097,#133098,#133099); +#133097 = CARTESIAN_POINT('',(212.53047591426,-130.7070502928,1.585)); +#133098 = DIRECTION('',(0.,0.,-1.)); +#133099 = DIRECTION('',(-0.613110973215,0.789996793995,0.)); +#133100 = ORIENTED_EDGE('',*,*,#133101,.T.); +#133101 = EDGE_CURVE('',#133093,#133102,#133104,.T.); +#133102 = VERTEX_POINT('',#133103); +#133103 = CARTESIAN_POINT('',(212.338222,-131.534817,1.585)); +#133104 = LINE('',#133105,#133106); +#133105 = CARTESIAN_POINT('',(212.609228,-130.716978,1.585)); +#133106 = VECTOR('',#133107,1.); +#133107 = DIRECTION('',(-0.314548593613,-0.949241371968,0.)); +#133108 = ORIENTED_EDGE('',*,*,#133109,.T.); +#133109 = EDGE_CURVE('',#133102,#133110,#133112,.T.); +#133110 = VERTEX_POINT('',#133111); +#133111 = CARTESIAN_POINT('',(212.753482,-131.534817,1.585)); +#133112 = LINE('',#133113,#133114); +#133113 = CARTESIAN_POINT('',(212.338222,-131.534817,1.585)); +#133114 = VECTOR('',#133115,1.); +#133115 = DIRECTION('',(1.,0.,0.)); +#133116 = ORIENTED_EDGE('',*,*,#133117,.T.); +#133117 = EDGE_CURVE('',#133110,#133118,#133120,.T.); +#133118 = VERTEX_POINT('',#133119); +#133119 = CARTESIAN_POINT('',(212.755007,-131.175374,1.585)); +#133120 = LINE('',#133121,#133122); +#133121 = CARTESIAN_POINT('',(212.753482,-131.534817,1.585)); +#133122 = VECTOR('',#133123,1.); +#133123 = DIRECTION('',(4.242637288737E-03,0.999990999974,0.)); +#133124 = ORIENTED_EDGE('',*,*,#133125,.T.); +#133125 = EDGE_CURVE('',#133118,#133126,#133128,.T.); +#133126 = VERTEX_POINT('',#133127); +#133127 = CARTESIAN_POINT('',(212.910707,-131.175374,1.585)); +#133128 = CIRCLE('',#133129,7.937510771645E-02); +#133129 = AXIS2_PLACEMENT_3D('',#133130,#133131,#133132); +#133130 = CARTESIAN_POINT('',(212.832857,-131.190859,1.585)); +#133131 = DIRECTION('',(0.,0.,-1.)); +#133132 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#133133 = ORIENTED_EDGE('',*,*,#133134,.T.); +#133134 = EDGE_CURVE('',#133126,#133135,#133137,.T.); +#133135 = VERTEX_POINT('',#133136); +#133136 = CARTESIAN_POINT('',(212.912232,-131.534817,1.585)); +#133137 = LINE('',#133138,#133139); +#133138 = CARTESIAN_POINT('',(212.910707,-131.175374,1.585)); +#133139 = VECTOR('',#133140,1.); +#133140 = DIRECTION('',(4.242637288657E-03,-0.999990999974,0.)); +#133141 = ORIENTED_EDGE('',*,*,#133142,.T.); +#133142 = EDGE_CURVE('',#133135,#133143,#133145,.T.); +#133143 = VERTEX_POINT('',#133144); +#133144 = CARTESIAN_POINT('',(213.029771,-131.536342,1.585)); +#133145 = LINE('',#133146,#133147); +#133146 = CARTESIAN_POINT('',(212.912232,-131.534817,1.585)); +#133147 = VECTOR('',#133148,1.); +#133148 = DIRECTION('',(0.999915842877,-1.297332511229E-02,0.)); +#133149 = ORIENTED_EDGE('',*,*,#133150,.T.); +#133150 = EDGE_CURVE('',#133143,#133151,#133153,.T.); +#133151 = VERTEX_POINT('',#133152); +#133152 = CARTESIAN_POINT('',(213.029771,-131.692042,1.585)); +#133153 = CIRCLE('',#133154,7.937510771647E-02); +#133154 = AXIS2_PLACEMENT_3D('',#133155,#133156,#133157); +#133155 = CARTESIAN_POINT('',(213.014286,-131.614192,1.585)); +#133156 = DIRECTION('',(0.,0.,-1.)); +#133157 = DIRECTION('',(0.19508634943,0.980786070591,0.)); +#133158 = ORIENTED_EDGE('',*,*,#133159,.T.); +#133159 = EDGE_CURVE('',#133151,#133160,#133162,.T.); +#133160 = VERTEX_POINT('',#133161); +#133161 = CARTESIAN_POINT('',(212.912232,-131.693567,1.585)); +#133162 = LINE('',#133163,#133164); +#133163 = CARTESIAN_POINT('',(213.029771,-131.692042,1.585)); +#133164 = VECTOR('',#133165,1.); +#133165 = DIRECTION('',(-0.999915842877,-1.297332511253E-02,0.)); +#133166 = ORIENTED_EDGE('',*,*,#133167,.T.); +#133167 = EDGE_CURVE('',#133160,#133168,#133170,.T.); +#133168 = VERTEX_POINT('',#133169); +#133169 = CARTESIAN_POINT('',(212.910707,-132.053011,1.585)); +#133170 = LINE('',#133171,#133172); +#133171 = CARTESIAN_POINT('',(212.912232,-131.693567,1.585)); +#133172 = VECTOR('',#133173,1.); +#133173 = DIRECTION('',(-4.242625485537E-03,-0.999991000024,0.)); +#133174 = ORIENTED_EDGE('',*,*,#133175,.T.); +#133175 = EDGE_CURVE('',#133168,#133176,#133178,.T.); +#133176 = VERTEX_POINT('',#133177); +#133177 = CARTESIAN_POINT('',(212.755007,-132.053011,1.585)); +#133178 = CIRCLE('',#133179,7.937510771647E-02); +#133179 = AXIS2_PLACEMENT_3D('',#133180,#133181,#133182); +#133180 = CARTESIAN_POINT('',(212.832857,-132.037526,1.585)); +#133181 = DIRECTION('',(-0.,0.,-1.)); +#133182 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#133183 = ORIENTED_EDGE('',*,*,#133184,.T.); +#133184 = EDGE_CURVE('',#133176,#133185,#133187,.T.); +#133185 = VERTEX_POINT('',#133186); +#133186 = CARTESIAN_POINT('',(212.753482,-131.693567,1.585)); +#133187 = LINE('',#133188,#133189); +#133188 = CARTESIAN_POINT('',(212.755007,-132.053011,1.585)); +#133189 = VECTOR('',#133190,1.); +#133190 = DIRECTION('',(-4.242625485616E-03,0.999991000024,0.)); +#133191 = ORIENTED_EDGE('',*,*,#133192,.T.); +#133192 = EDGE_CURVE('',#133185,#133193,#133195,.T.); +#133193 = VERTEX_POINT('',#133194); +#133194 = CARTESIAN_POINT('',(212.21261,-131.692042,1.585)); +#133195 = LINE('',#133196,#133197); +#133196 = CARTESIAN_POINT('',(212.753482,-131.693567,1.585)); +#133197 = VECTOR('',#133198,1.); +#133198 = DIRECTION('',(-0.999996025174,2.819509862603E-03,0.)); +#133199 = ORIENTED_EDGE('',*,*,#133200,.T.); +#133200 = EDGE_CURVE('',#133193,#133201,#133203,.T.); +#133201 = VERTEX_POINT('',#133202); +#133202 = CARTESIAN_POINT('',(212.152793,-131.589091,1.585)); +#133203 = CIRCLE('',#133204,7.937596479225E-02); +#133204 = AXIS2_PLACEMENT_3D('',#133205,#133206,#133207); +#133205 = CARTESIAN_POINT('',(212.22809584843,-131.6141912948,1.585)); +#133206 = DIRECTION('',(0.,0.,-1.)); +#133207 = DIRECTION('',(-0.195094931792,-0.980784363451,-0.)); +#133208 = ORIENTED_EDGE('',*,*,#133209,.T.); +#133209 = EDGE_CURVE('',#133201,#133210,#133212,.T.); +#133210 = VERTEX_POINT('',#133211); +#133211 = CARTESIAN_POINT('',(212.461518,-130.667741,1.585)); +#133212 = LINE('',#133213,#133214); +#133213 = CARTESIAN_POINT('',(212.152793,-131.589091,1.585)); +#133214 = VECTOR('',#133215,1.); +#133215 = DIRECTION('',(0.317717036574,0.948185575017,0.)); +#133216 = ORIENTED_EDGE('',*,*,#133217,.T.); +#133217 = EDGE_CURVE('',#133210,#133091,#133218,.T.); +#133218 = LINE('',#133219,#133220); +#133219 = CARTESIAN_POINT('',(212.461518,-130.667741,1.585)); +#133220 = VECTOR('',#133221,1.); +#133221 = DIRECTION('',(0.655199704878,0.755455721223,0.)); +#133222 = PLANE('',#133223); +#133223 = AXIS2_PLACEMENT_3D('',#133224,#133225,#133226); +#133224 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133225 = DIRECTION('',(0.,0.,1.)); +#133226 = DIRECTION('',(1.,0.,-0.)); +#133227 = SHELL_BASED_SURFACE_MODEL('',(#133228)); +#133228 = OPEN_SHELL('',(#133229)); +#133229 = ADVANCED_FACE('',(#133230),#133307,.T.); +#133230 = FACE_BOUND('',#133231,.F.); +#133231 = EDGE_LOOP('',(#133232,#133243,#133251,#133260,#133268,#133277, + #133285,#133293,#133301)); +#133232 = ORIENTED_EDGE('',*,*,#133233,.T.); +#133233 = EDGE_CURVE('',#133234,#133236,#133238,.T.); +#133234 = VERTEX_POINT('',#133235); +#133235 = CARTESIAN_POINT('',(117.234761,-131.304606,1.585)); +#133236 = VERTEX_POINT('',#133237); +#133237 = CARTESIAN_POINT('',(117.320152,-131.238335,1.585)); +#133238 = CIRCLE('',#133239,6.499990070433E-02); +#133239 = AXIS2_PLACEMENT_3D('',#133240,#133241,#133242); +#133240 = CARTESIAN_POINT('',(117.29959745813,-131.2999993973,1.585)); +#133241 = DIRECTION('',(0.,0.,-1.)); +#133242 = DIRECTION('',(-0.997485495103,-7.087091829134E-02,-0.)); +#133243 = ORIENTED_EDGE('',*,*,#133244,.T.); +#133244 = EDGE_CURVE('',#133236,#133245,#133247,.T.); +#133245 = VERTEX_POINT('',#133246); +#133246 = CARTESIAN_POINT('',(118.220152,-131.538334,1.585)); +#133247 = LINE('',#133248,#133249); +#133248 = CARTESIAN_POINT('',(117.320152,-131.238335,1.585)); +#133249 = VECTOR('',#133250,1.); +#133250 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#133251 = ORIENTED_EDGE('',*,*,#133252,.T.); +#133252 = EDGE_CURVE('',#133245,#133253,#133255,.T.); +#133253 = VERTEX_POINT('',#133254); +#133254 = CARTESIAN_POINT('',(118.220152,-131.661664,1.585)); +#133255 = CIRCLE('',#133256,6.500111611219E-02); +#133256 = AXIS2_PLACEMENT_3D('',#133257,#133258,#133259); +#133257 = CARTESIAN_POINT('',(118.19959542268,-131.599999,1.585)); +#133258 = DIRECTION('',(0.,0.,-1.)); +#133259 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#133260 = ORIENTED_EDGE('',*,*,#133261,.T.); +#133261 = EDGE_CURVE('',#133253,#133262,#133264,.T.); +#133262 = VERTEX_POINT('',#133263); +#133263 = CARTESIAN_POINT('',(117.320152,-131.961663,1.585)); +#133264 = LINE('',#133265,#133266); +#133265 = CARTESIAN_POINT('',(118.220152,-131.661664,1.585)); +#133266 = VECTOR('',#133267,1.); +#133267 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#133268 = ORIENTED_EDGE('',*,*,#133269,.T.); +#133269 = EDGE_CURVE('',#133262,#133270,#133272,.T.); +#133270 = VERTEX_POINT('',#133271); +#133271 = CARTESIAN_POINT('',(117.279042,-131.838335,1.585)); +#133272 = CIRCLE('',#133273,6.499966862236E-02); +#133273 = AXIS2_PLACEMENT_3D('',#133274,#133275,#133276); +#133274 = CARTESIAN_POINT('',(117.29959712923,-131.8999989569,1.585)); +#133275 = DIRECTION('',(0.,0.,-1.)); +#133276 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#133277 = ORIENTED_EDGE('',*,*,#133278,.T.); +#133278 = EDGE_CURVE('',#133270,#133279,#133281,.T.); +#133279 = VERTEX_POINT('',#133280); +#133280 = CARTESIAN_POINT('',(117.99405,-131.599999,1.585)); +#133281 = LINE('',#133282,#133283); +#133282 = CARTESIAN_POINT('',(117.279042,-131.838335,1.585)); +#133283 = VECTOR('',#133284,1.); +#133284 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#133285 = ORIENTED_EDGE('',*,*,#133286,.T.); +#133286 = EDGE_CURVE('',#133279,#133287,#133289,.T.); +#133287 = VERTEX_POINT('',#133288); +#133288 = CARTESIAN_POINT('',(117.279042,-131.361663,1.585)); +#133289 = LINE('',#133290,#133291); +#133290 = CARTESIAN_POINT('',(117.99405,-131.599999,1.585)); +#133291 = VECTOR('',#133292,1.); +#133292 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#133293 = ORIENTED_EDGE('',*,*,#133294,.T.); +#133294 = EDGE_CURVE('',#133287,#133295,#133297,.T.); +#133295 = VERTEX_POINT('',#133296); +#133296 = CARTESIAN_POINT('',(117.257009,-131.349103,1.585)); +#133297 = LINE('',#133298,#133299); +#133298 = CARTESIAN_POINT('',(117.279042,-131.361663,1.585)); +#133299 = VECTOR('',#133300,1.); +#133300 = DIRECTION('',(-0.868757082859,0.495238458707,0.)); +#133301 = ORIENTED_EDGE('',*,*,#133302,.T.); +#133302 = EDGE_CURVE('',#133295,#133234,#133303,.T.); +#133303 = LINE('',#133304,#133305); +#133304 = CARTESIAN_POINT('',(117.257009,-131.349103,1.585)); +#133305 = VECTOR('',#133306,1.); +#133306 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#133307 = PLANE('',#133308); +#133308 = AXIS2_PLACEMENT_3D('',#133309,#133310,#133311); +#133309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133310 = DIRECTION('',(0.,0.,1.)); +#133311 = DIRECTION('',(1.,0.,-0.)); +#133312 = SHELL_BASED_SURFACE_MODEL('',(#133313)); +#133313 = OPEN_SHELL('',(#133314)); +#133314 = ADVANCED_FACE('',(#133315),#133449,.T.); +#133315 = FACE_BOUND('',#133316,.F.); +#133316 = EDGE_LOOP('',(#133317,#133327,#133335,#133344,#133352,#133360, + #133369,#133377,#133386,#133394,#133402,#133410,#133418,#133427, + #133435,#133443)); +#133317 = ORIENTED_EDGE('',*,*,#133318,.T.); +#133318 = EDGE_CURVE('',#133319,#133321,#133323,.T.); +#133319 = VERTEX_POINT('',#133320); +#133320 = CARTESIAN_POINT('',(203.436181,-130.724941,1.585)); +#133321 = VERTEX_POINT('',#133322); +#133322 = CARTESIAN_POINT('',(203.474637,-130.70436,1.585)); +#133323 = LINE('',#133324,#133325); +#133324 = CARTESIAN_POINT('',(203.436181,-130.724941,1.585)); +#133325 = VECTOR('',#133326,1.); +#133326 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#133327 = ORIENTED_EDGE('',*,*,#133328,.T.); +#133328 = EDGE_CURVE('',#133321,#133329,#133331,.T.); +#133329 = VERTEX_POINT('',#133330); +#133330 = CARTESIAN_POINT('',(203.496474,-130.70436,1.585)); +#133331 = LINE('',#133332,#133333); +#133332 = CARTESIAN_POINT('',(203.474637,-130.70436,1.585)); +#133333 = VECTOR('',#133334,1.); +#133334 = DIRECTION('',(1.,0.,0.)); +#133335 = ORIENTED_EDGE('',*,*,#133336,.T.); +#133336 = EDGE_CURVE('',#133329,#133337,#133339,.T.); +#133337 = VERTEX_POINT('',#133338); +#133338 = CARTESIAN_POINT('',(203.564269,-130.777919,1.585)); +#133339 = CIRCLE('',#133340,7.216898094226E-02); +#133340 = AXIS2_PLACEMENT_3D('',#133341,#133342,#133343); +#133341 = CARTESIAN_POINT('',(203.49211606389,-130.7763972834,1.585)); +#133342 = DIRECTION('',(0.,0.,-1.)); +#133343 = DIRECTION('',(6.038516895267E-02,0.998175150648,0.)); +#133344 = ORIENTED_EDGE('',*,*,#133345,.T.); +#133345 = EDGE_CURVE('',#133337,#133346,#133348,.T.); +#133346 = VERTEX_POINT('',#133347); +#133347 = CARTESIAN_POINT('',(203.564269,-131.702919,1.585)); +#133348 = LINE('',#133349,#133350); +#133349 = CARTESIAN_POINT('',(203.564269,-130.777919,1.585)); +#133350 = VECTOR('',#133351,1.); +#133351 = DIRECTION('',(0.,-1.,0.)); +#133352 = ORIENTED_EDGE('',*,*,#133353,.T.); +#133353 = EDGE_CURVE('',#133346,#133354,#133356,.T.); +#133354 = VERTEX_POINT('',#133355); +#133355 = CARTESIAN_POINT('',(203.789615,-131.70436,1.585)); +#133356 = LINE('',#133357,#133358); +#133357 = CARTESIAN_POINT('',(203.564269,-131.702919,1.585)); +#133358 = VECTOR('',#133359,1.); +#133359 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#133360 = ORIENTED_EDGE('',*,*,#133361,.T.); +#133361 = EDGE_CURVE('',#133354,#133362,#133364,.T.); +#133362 = VERTEX_POINT('',#133363); +#133363 = CARTESIAN_POINT('',(203.774983,-131.852919,1.585)); +#133364 = CIRCLE('',#133365,7.500006711465E-02); +#133365 = AXIS2_PLACEMENT_3D('',#133366,#133367,#133368); +#133366 = CARTESIAN_POINT('',(203.77498306711,-131.7779189328,1.585)); +#133367 = DIRECTION('',(0.,0.,-1.)); +#133368 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#133369 = ORIENTED_EDGE('',*,*,#133370,.T.); +#133370 = EDGE_CURVE('',#133362,#133371,#133373,.T.); +#133371 = VERTEX_POINT('',#133372); +#133372 = CARTESIAN_POINT('',(203.188923,-131.851478,1.585)); +#133373 = LINE('',#133374,#133375); +#133374 = CARTESIAN_POINT('',(203.774983,-131.852919,1.585)); +#133375 = VECTOR('',#133376,1.); +#133376 = DIRECTION('',(-0.999996977183,2.458785182659E-03,0.)); +#133377 = ORIENTED_EDGE('',*,*,#133378,.T.); +#133378 = EDGE_CURVE('',#133371,#133379,#133381,.T.); +#133379 = VERTEX_POINT('',#133380); +#133380 = CARTESIAN_POINT('',(203.203555,-131.702919,1.585)); +#133381 = CIRCLE('',#133382,7.500006711463E-02); +#133382 = AXIS2_PLACEMENT_3D('',#133383,#133384,#133385); +#133383 = CARTESIAN_POINT('',(203.20355493288,-131.7779190671,1.585)); +#133384 = DIRECTION('',(0.,0.,-1.)); +#133385 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#133386 = ORIENTED_EDGE('',*,*,#133387,.T.); +#133387 = EDGE_CURVE('',#133379,#133388,#133390,.T.); +#133388 = VERTEX_POINT('',#133389); +#133389 = CARTESIAN_POINT('',(203.414269,-131.702919,1.585)); +#133390 = LINE('',#133391,#133392); +#133391 = CARTESIAN_POINT('',(203.203555,-131.702919,1.585)); +#133392 = VECTOR('',#133393,1.); +#133393 = DIRECTION('',(1.,0.,0.)); +#133394 = ORIENTED_EDGE('',*,*,#133395,.T.); +#133395 = EDGE_CURVE('',#133388,#133396,#133398,.T.); +#133396 = VERTEX_POINT('',#133397); +#133397 = CARTESIAN_POINT('',(203.414269,-131.006604,1.585)); +#133398 = LINE('',#133399,#133400); +#133399 = CARTESIAN_POINT('',(203.414269,-131.702919,1.585)); +#133400 = VECTOR('',#133401,1.); +#133401 = DIRECTION('',(0.,1.,0.)); +#133402 = ORIENTED_EDGE('',*,*,#133403,.T.); +#133403 = EDGE_CURVE('',#133396,#133404,#133406,.T.); +#133404 = VERTEX_POINT('',#133405); +#133405 = CARTESIAN_POINT('',(203.338633,-131.079131,1.585)); +#133406 = LINE('',#133407,#133408); +#133407 = CARTESIAN_POINT('',(203.414269,-131.006604,1.585)); +#133408 = VECTOR('',#133409,1.); +#133409 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#133410 = ORIENTED_EDGE('',*,*,#133411,.T.); +#133411 = EDGE_CURVE('',#133404,#133412,#133414,.T.); +#133412 = VERTEX_POINT('',#133413); +#133413 = CARTESIAN_POINT('',(203.223364,-131.13597,1.585)); +#133414 = LINE('',#133415,#133416); +#133415 = CARTESIAN_POINT('',(203.338633,-131.079131,1.585)); +#133416 = VECTOR('',#133417,1.); +#133417 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#133418 = ORIENTED_EDGE('',*,*,#133419,.T.); +#133419 = EDGE_CURVE('',#133412,#133420,#133422,.T.); +#133420 = VERTEX_POINT('',#133421); +#133421 = CARTESIAN_POINT('',(203.170014,-130.996551,1.585)); +#133422 = CIRCLE('',#133423,7.50000527236E-02); +#133423 = AXIS2_PLACEMENT_3D('',#133424,#133425,#133426); +#133424 = CARTESIAN_POINT('',(203.20355455676,-131.0636333297,1.585)); +#133425 = DIRECTION('',(0.,0.,-1.)); +#133426 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#133427 = ORIENTED_EDGE('',*,*,#133428,.T.); +#133428 = EDGE_CURVE('',#133420,#133429,#133431,.T.); +#133429 = VERTEX_POINT('',#133430); +#133430 = CARTESIAN_POINT('',(203.254366,-130.954375,1.585)); +#133431 = LINE('',#133432,#133433); +#133432 = CARTESIAN_POINT('',(203.170014,-130.996551,1.585)); +#133433 = VECTOR('',#133434,1.); +#133434 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#133435 = ORIENTED_EDGE('',*,*,#133436,.T.); +#133436 = EDGE_CURVE('',#133429,#133437,#133439,.T.); +#133437 = VERTEX_POINT('',#133438); +#133438 = CARTESIAN_POINT('',(203.335745,-130.872996,1.585)); +#133439 = LINE('',#133440,#133441); +#133440 = CARTESIAN_POINT('',(203.254366,-130.954375,1.585)); +#133441 = VECTOR('',#133442,1.); +#133442 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#133443 = ORIENTED_EDGE('',*,*,#133444,.T.); +#133444 = EDGE_CURVE('',#133437,#133319,#133445,.T.); +#133445 = LINE('',#133446,#133447); +#133446 = CARTESIAN_POINT('',(203.335745,-130.872996,1.585)); +#133447 = VECTOR('',#133448,1.); +#133448 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#133449 = PLANE('',#133450); +#133450 = AXIS2_PLACEMENT_3D('',#133451,#133452,#133453); +#133451 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133452 = DIRECTION('',(0.,0.,1.)); +#133453 = DIRECTION('',(1.,0.,-0.)); +#133454 = SHELL_BASED_SURFACE_MODEL('',(#133455)); +#133455 = OPEN_SHELL('',(#133456)); +#133456 = ADVANCED_FACE('',(#133457),#133576,.T.); +#133457 = FACE_BOUND('',#133458,.F.); +#133458 = EDGE_LOOP('',(#133459,#133470,#133478,#133487,#133495,#133503, + #133512,#133520,#133529,#133537,#133545,#133554,#133562,#133570)); +#133459 = ORIENTED_EDGE('',*,*,#133460,.T.); +#133460 = EDGE_CURVE('',#133461,#133463,#133465,.T.); +#133461 = VERTEX_POINT('',#133462); +#133462 = CARTESIAN_POINT('',(202.819209,-130.72294,1.585)); +#133463 = VERTEX_POINT('',#133464); +#133464 = CARTESIAN_POINT('',(202.943182,-130.795291,1.585)); +#133465 = CIRCLE('',#133466,7.499997880121E-02); +#133466 = AXIS2_PLACEMENT_3D('',#133467,#133468,#133469); +#133467 = CARTESIAN_POINT('',(202.87022162542,-130.7779191675,1.585)); +#133468 = DIRECTION('',(0.,0.,-1.)); +#133469 = DIRECTION('',(-0.680168531213,0.733055774922,0.)); +#133470 = ORIENTED_EDGE('',*,*,#133471,.T.); +#133471 = EDGE_CURVE('',#133463,#133472,#133474,.T.); +#133472 = VERTEX_POINT('',#133473); +#133473 = CARTESIAN_POINT('',(202.700296,-131.809191,1.585)); +#133474 = LINE('',#133475,#133476); +#133475 = CARTESIAN_POINT('',(202.943182,-130.795291,1.585)); +#133476 = VECTOR('',#133477,1.); +#133477 = DIRECTION('',(-0.232964820327,-0.972485163121,0.)); +#133478 = ORIENTED_EDGE('',*,*,#133479,.T.); +#133479 = EDGE_CURVE('',#133472,#133480,#133482,.T.); +#133480 = VERTEX_POINT('',#133481); +#133481 = CARTESIAN_POINT('',(202.559658,-131.797244,1.585)); +#133482 = CIRCLE('',#133483,7.500055331739E-02); +#133483 = AXIS2_PLACEMENT_3D('',#133484,#133485,#133486); +#133484 = CARTESIAN_POINT('',(202.63212608181,-131.7779188837,1.585)); +#133485 = DIRECTION('',(-0.,0.,-1.)); +#133486 = DIRECTION('',(0.908925536853,-0.4169584733,-0.)); +#133487 = ORIENTED_EDGE('',*,*,#133488,.T.); +#133488 = EDGE_CURVE('',#133480,#133489,#133491,.T.); +#133489 = VERTEX_POINT('',#133490); +#133490 = CARTESIAN_POINT('',(202.441649,-131.354713,1.585)); +#133491 = LINE('',#133492,#133493); +#133492 = CARTESIAN_POINT('',(202.559658,-131.797244,1.585)); +#133493 = VECTOR('',#133494,1.); +#133494 = DIRECTION('',(-0.257664145438,0.966234540966,0.)); +#133495 = ORIENTED_EDGE('',*,*,#133496,.T.); +#133496 = EDGE_CURVE('',#133489,#133497,#133499,.T.); +#133497 = VERTEX_POINT('',#133498); +#133498 = CARTESIAN_POINT('',(202.318479,-131.81101,1.585)); +#133499 = LINE('',#133500,#133501); +#133500 = CARTESIAN_POINT('',(202.441649,-131.354713,1.585)); +#133501 = VECTOR('',#133502,1.); +#133502 = DIRECTION('',(-0.260606315218,-0.965445155598,0.)); +#133503 = ORIENTED_EDGE('',*,*,#133504,.T.); +#133504 = EDGE_CURVE('',#133497,#133505,#133507,.T.); +#133505 = VERTEX_POINT('',#133506); +#133506 = CARTESIAN_POINT('',(202.178214,-131.795291,1.585)); +#133507 = CIRCLE('',#133508,7.499976850752E-02); +#133508 = AXIS2_PLACEMENT_3D('',#133509,#133510,#133511); +#133509 = CARTESIAN_POINT('',(202.25117410899,-131.77791896,1.585)); +#133510 = DIRECTION('',(-0.,0.,-1.)); +#133511 = DIRECTION('',(0.897401316583,-0.44121522752,-0.)); +#133512 = ORIENTED_EDGE('',*,*,#133513,.T.); +#133513 = EDGE_CURVE('',#133505,#133514,#133516,.T.); +#133514 = VERTEX_POINT('',#133515); +#133515 = CARTESIAN_POINT('',(201.938131,-130.780723,1.585)); +#133516 = LINE('',#133517,#133518); +#133517 = CARTESIAN_POINT('',(202.178214,-131.795291,1.585)); +#133518 = VECTOR('',#133519,1.); +#133519 = DIRECTION('',(-0.23027618176,0.97312531573,0.)); +#133520 = ORIENTED_EDGE('',*,*,#133521,.T.); +#133521 = EDGE_CURVE('',#133514,#133522,#133524,.T.); +#133522 = VERTEX_POINT('',#133523); +#133523 = CARTESIAN_POINT('',(202.086039,-130.760547,1.585)); +#133524 = CIRCLE('',#133525,7.499999556139E-02); +#133525 = AXIS2_PLACEMENT_3D('',#133526,#133527,#133528); +#133526 = CARTESIAN_POINT('',(202.0130785449,-130.7779185666,1.585)); +#133527 = DIRECTION('',(0.,0.,-1.)); +#133528 = DIRECTION('',(-0.999300657904,-3.739244726397E-02,-0.)); +#133529 = ORIENTED_EDGE('',*,*,#133530,.T.); +#133530 = EDGE_CURVE('',#133522,#133531,#133533,.T.); +#133531 = VERTEX_POINT('',#133532); +#133532 = CARTESIAN_POINT('',(202.25529,-131.471403,1.585)); +#133533 = LINE('',#133534,#133535); +#133534 = CARTESIAN_POINT('',(202.086039,-130.760547,1.585)); +#133535 = VECTOR('',#133536,1.); +#133536 = DIRECTION('',(0.231619972271,-0.972806346836,0.)); +#133537 = ORIENTED_EDGE('',*,*,#133538,.T.); +#133538 = EDGE_CURVE('',#133531,#133539,#133541,.T.); +#133539 = VERTEX_POINT('',#133540); +#133540 = CARTESIAN_POINT('',(202.374345,-131.030541,1.585)); +#133541 = LINE('',#133542,#133543); +#133542 = CARTESIAN_POINT('',(202.25529,-131.471403,1.585)); +#133543 = VECTOR('',#133544,1.); +#133544 = DIRECTION('',(0.260711285702,0.96541681439,0.)); +#133545 = ORIENTED_EDGE('',*,*,#133546,.T.); +#133546 = EDGE_CURVE('',#133539,#133547,#133549,.T.); +#133547 = VERTEX_POINT('',#133548); +#133548 = CARTESIAN_POINT('',(202.514118,-131.044308,1.585)); +#133549 = CIRCLE('',#133550,7.500013992439E-02); +#133550 = AXIS2_PLACEMENT_3D('',#133551,#133552,#133553); +#133551 = CARTESIAN_POINT('',(202.44165014547,-131.0636323641,1.585)); +#133552 = DIRECTION('',(0.,0.,-1.)); +#133553 = DIRECTION('',(-0.897400265457,0.44121736543,0.)); +#133554 = ORIENTED_EDGE('',*,*,#133555,.T.); +#133555 = EDGE_CURVE('',#133547,#133556,#133558,.T.); +#133556 = VERTEX_POINT('',#133557); +#133557 = CARTESIAN_POINT('',(202.628009,-131.471403,1.585)); +#133558 = LINE('',#133559,#133560); +#133559 = CARTESIAN_POINT('',(202.514118,-131.044308,1.585)); +#133560 = VECTOR('',#133561,1.); +#133561 = DIRECTION('',(0.257660538413,-0.966235502838,0.)); +#133562 = ORIENTED_EDGE('',*,*,#133563,.T.); +#133563 = EDGE_CURVE('',#133556,#133564,#133566,.T.); +#133564 = VERTEX_POINT('',#133565); +#133565 = CARTESIAN_POINT('',(202.802052,-130.746647,1.585)); +#133566 = LINE('',#133567,#133568); +#133567 = CARTESIAN_POINT('',(202.628009,-131.471403,1.585)); +#133568 = VECTOR('',#133569,1.); +#133569 = DIRECTION('',(0.233501785734,0.972356372972,0.)); +#133570 = ORIENTED_EDGE('',*,*,#133571,.T.); +#133571 = EDGE_CURVE('',#133564,#133461,#133572,.T.); +#133572 = LINE('',#133573,#133574); +#133573 = CARTESIAN_POINT('',(202.802052,-130.746647,1.585)); +#133574 = VECTOR('',#133575,1.); +#133575 = DIRECTION('',(0.586282529115,0.810106657209,0.)); +#133576 = PLANE('',#133577); +#133577 = AXIS2_PLACEMENT_3D('',#133578,#133579,#133580); +#133578 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133579 = DIRECTION('',(0.,0.,1.)); +#133580 = DIRECTION('',(1.,0.,-0.)); +#133581 = SHELL_BASED_SURFACE_MODEL('',(#133582)); +#133582 = OPEN_SHELL('',(#133583)); +#133583 = ADVANCED_FACE('',(#133584),#133848,.T.); +#133584 = FACE_BOUND('',#133585,.F.); +#133585 = EDGE_LOOP('',(#133586,#133596,#133604,#133612,#133621,#133629, + #133637,#133646,#133654,#133662,#133670,#133678,#133686,#133694, + #133702,#133711,#133719,#133727,#133735,#133743,#133752,#133760, + #133768,#133777,#133785,#133793,#133801,#133809,#133817,#133825, + #133833,#133842)); +#133586 = ORIENTED_EDGE('',*,*,#133587,.T.); +#133587 = EDGE_CURVE('',#133588,#133590,#133592,.T.); +#133588 = VERTEX_POINT('',#133589); +#133589 = CARTESIAN_POINT('',(201.163714,-130.76242,1.585)); +#133590 = VERTEX_POINT('',#133591); +#133591 = CARTESIAN_POINT('',(201.284161,-130.70436,1.585)); +#133592 = LINE('',#133593,#133594); +#133593 = CARTESIAN_POINT('',(201.163714,-130.76242,1.585)); +#133594 = VECTOR('',#133595,1.); +#133595 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#133596 = ORIENTED_EDGE('',*,*,#133597,.T.); +#133597 = EDGE_CURVE('',#133590,#133598,#133600,.T.); +#133598 = VERTEX_POINT('',#133599); +#133599 = CARTESIAN_POINT('',(201.544293,-130.703648,1.585)); +#133600 = LINE('',#133601,#133602); +#133601 = CARTESIAN_POINT('',(201.284161,-130.70436,1.585)); +#133602 = VECTOR('',#133603,1.); +#133603 = DIRECTION('',(0.99999625424,2.737061695754E-03,0.)); +#133604 = ORIENTED_EDGE('',*,*,#133605,.T.); +#133605 = EDGE_CURVE('',#133598,#133606,#133608,.T.); +#133606 = VERTEX_POINT('',#133607); +#133607 = CARTESIAN_POINT('',(201.716887,-130.760381,1.585)); +#133608 = LINE('',#133609,#133610); +#133609 = CARTESIAN_POINT('',(201.544293,-130.703648,1.585)); +#133610 = VECTOR('',#133611,1.); +#133611 = DIRECTION('',(0.949993312755,-0.312270244693,0.)); +#133612 = ORIENTED_EDGE('',*,*,#133613,.T.); +#133613 = EDGE_CURVE('',#133606,#133614,#133616,.T.); +#133614 = VERTEX_POINT('',#133615); +#133615 = CARTESIAN_POINT('',(201.656027,-130.896689,1.585)); +#133616 = CIRCLE('',#133617,7.499990197507E-02); +#133617 = AXIS2_PLACEMENT_3D('',#133618,#133619,#133620); +#133618 = CARTESIAN_POINT('',(201.67974495478,-130.8255381467,1.585)); +#133619 = DIRECTION('',(0.,0.,-1.)); +#133620 = DIRECTION('',(0.495227916748,0.86876309226,0.)); +#133621 = ORIENTED_EDGE('',*,*,#133622,.T.); +#133622 = EDGE_CURVE('',#133614,#133623,#133625,.T.); +#133623 = VERTEX_POINT('',#133624); +#133624 = CARTESIAN_POINT('',(201.524718,-130.852919,1.585)); +#133625 = LINE('',#133626,#133627); +#133626 = CARTESIAN_POINT('',(201.656027,-130.896689,1.585)); +#133627 = VECTOR('',#133628,1.); +#133628 = DIRECTION('',(-0.948682575567,0.316229933459,0.)); +#133629 = ORIENTED_EDGE('',*,*,#133630,.T.); +#133630 = EDGE_CURVE('',#133623,#133631,#133633,.T.); +#133631 = VERTEX_POINT('',#133632); +#133632 = CARTESIAN_POINT('',(201.316498,-130.852919,1.585)); +#133633 = LINE('',#133634,#133635); +#133634 = CARTESIAN_POINT('',(201.524718,-130.852919,1.585)); +#133635 = VECTOR('',#133636,1.); +#133636 = DIRECTION('',(-1.,0.,0.)); +#133637 = ORIENTED_EDGE('',*,*,#133638,.T.); +#133638 = EDGE_CURVE('',#133631,#133639,#133641,.T.); +#133639 = VERTEX_POINT('',#133640); +#133640 = CARTESIAN_POINT('',(201.183317,-130.9861,1.585)); +#133641 = CIRCLE('',#133642,0.18686440374); +#133642 = AXIS2_PLACEMENT_3D('',#133643,#133644,#133645); +#133643 = CARTESIAN_POINT('',(201.364034,-131.033636,1.585)); +#133644 = DIRECTION('',(0.,0.,1.)); +#133645 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#133646 = ORIENTED_EDGE('',*,*,#133647,.T.); +#133647 = EDGE_CURVE('',#133639,#133648,#133650,.T.); +#133648 = VERTEX_POINT('',#133649); +#133649 = CARTESIAN_POINT('',(201.183317,-131.045928,1.585)); +#133650 = LINE('',#133651,#133652); +#133651 = CARTESIAN_POINT('',(201.183317,-130.9861,1.585)); +#133652 = VECTOR('',#133653,1.); +#133653 = DIRECTION('',(0.,-1.,0.)); +#133654 = ORIENTED_EDGE('',*,*,#133655,.T.); +#133655 = EDGE_CURVE('',#133648,#133656,#133658,.T.); +#133656 = VERTEX_POINT('',#133657); +#133657 = CARTESIAN_POINT('',(201.217575,-131.114444,1.585)); +#133658 = LINE('',#133659,#133660); +#133659 = CARTESIAN_POINT('',(201.183317,-131.045928,1.585)); +#133660 = VECTOR('',#133661,1.); +#133661 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#133662 = ORIENTED_EDGE('',*,*,#133663,.T.); +#133663 = EDGE_CURVE('',#133656,#133664,#133666,.T.); +#133664 = VERTEX_POINT('',#133665); +#133665 = CARTESIAN_POINT('',(201.247982,-131.144851,1.585)); +#133666 = LINE('',#133667,#133668); +#133667 = CARTESIAN_POINT('',(201.217575,-131.114444,1.585)); +#133668 = VECTOR('',#133669,1.); +#133669 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#133670 = ORIENTED_EDGE('',*,*,#133671,.T.); +#133671 = EDGE_CURVE('',#133664,#133672,#133674,.T.); +#133672 = VERTEX_POINT('',#133673); +#133673 = CARTESIAN_POINT('',(201.324969,-131.183344,1.585)); +#133674 = LINE('',#133675,#133676); +#133675 = CARTESIAN_POINT('',(201.247982,-131.144851,1.585)); +#133676 = VECTOR('',#133677,1.); +#133677 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#133678 = ORIENTED_EDGE('',*,*,#133679,.T.); +#133679 = EDGE_CURVE('',#133672,#133680,#133682,.T.); +#133680 = VERTEX_POINT('',#133681); +#133681 = CARTESIAN_POINT('',(201.52281,-131.234646,1.585)); +#133682 = LINE('',#133683,#133684); +#133683 = CARTESIAN_POINT('',(201.324969,-131.183344,1.585)); +#133684 = VECTOR('',#133685,1.); +#133685 = DIRECTION('',(0.967985143201,-0.251007494991,0.)); +#133686 = ORIENTED_EDGE('',*,*,#133687,.T.); +#133687 = EDGE_CURVE('',#133680,#133688,#133690,.T.); +#133688 = VERTEX_POINT('',#133689); +#133689 = CARTESIAN_POINT('',(201.63179,-131.291595,1.585)); +#133690 = LINE('',#133691,#133692); +#133691 = CARTESIAN_POINT('',(201.52281,-131.234646,1.585)); +#133692 = VECTOR('',#133693,1.); +#133693 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#133694 = ORIENTED_EDGE('',*,*,#133695,.T.); +#133695 = EDGE_CURVE('',#133688,#133696,#133698,.T.); +#133696 = VERTEX_POINT('',#133697); +#133697 = CARTESIAN_POINT('',(201.695243,-131.357125,1.585)); +#133698 = LINE('',#133699,#133700); +#133699 = CARTESIAN_POINT('',(201.63179,-131.291595,1.585)); +#133700 = VECTOR('',#133701,1.); +#133701 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#133702 = ORIENTED_EDGE('',*,*,#133703,.T.); +#133703 = EDGE_CURVE('',#133696,#133704,#133706,.T.); +#133704 = VERTEX_POINT('',#133705); +#133705 = CARTESIAN_POINT('',(201.689877,-131.729963,1.585)); +#133706 = CIRCLE('',#133707,0.290999251663); +#133707 = AXIS2_PLACEMENT_3D('',#133708,#133709,#133710); +#133708 = CARTESIAN_POINT('',(201.4691523369,-131.5403286477,1.585)); +#133709 = DIRECTION('',(0.,0.,-1.)); +#133710 = DIRECTION('',(0.776945857418,0.629567418662,0.)); +#133711 = ORIENTED_EDGE('',*,*,#133712,.T.); +#133712 = EDGE_CURVE('',#133704,#133713,#133715,.T.); +#133713 = VERTEX_POINT('',#133714); +#133714 = CARTESIAN_POINT('',(201.624347,-131.793417,1.585)); +#133715 = LINE('',#133716,#133717); +#133716 = CARTESIAN_POINT('',(201.689877,-131.729963,1.585)); +#133717 = VECTOR('',#133718,1.); +#133718 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#133719 = ORIENTED_EDGE('',*,*,#133720,.T.); +#133720 = EDGE_CURVE('',#133713,#133721,#133723,.T.); +#133721 = VERTEX_POINT('',#133722); +#133722 = CARTESIAN_POINT('',(201.503901,-131.851478,1.585)); +#133723 = LINE('',#133724,#133725); +#133724 = CARTESIAN_POINT('',(201.624347,-131.793417,1.585)); +#133725 = VECTOR('',#133726,1.); +#133726 = DIRECTION('',(-0.900801384651,-0.434231350101,0.)); +#133727 = ORIENTED_EDGE('',*,*,#133728,.T.); +#133728 = EDGE_CURVE('',#133721,#133729,#133731,.T.); +#133729 = VERTEX_POINT('',#133730); +#133730 = CARTESIAN_POINT('',(201.234711,-131.850719,1.585)); +#133731 = LINE('',#133732,#133733); +#133732 = CARTESIAN_POINT('',(201.503901,-131.851478,1.585)); +#133733 = VECTOR('',#133734,1.); +#133734 = DIRECTION('',(-0.999996025037,2.819558612842E-03,0.)); +#133735 = ORIENTED_EDGE('',*,*,#133736,.T.); +#133736 = EDGE_CURVE('',#133729,#133737,#133739,.T.); +#133737 = VERTEX_POINT('',#133738); +#133738 = CARTESIAN_POINT('',(201.071174,-131.795457,1.585)); +#133739 = LINE('',#133740,#133741); +#133740 = CARTESIAN_POINT('',(201.234711,-131.850719,1.585)); +#133741 = VECTOR('',#133742,1.); +#133742 = DIRECTION('',(-0.94737239725,0.320133629801,0.)); +#133743 = ORIENTED_EDGE('',*,*,#133744,.T.); +#133744 = EDGE_CURVE('',#133737,#133745,#133747,.T.); +#133745 = VERTEX_POINT('',#133746); +#133746 = CARTESIAN_POINT('',(201.132034,-131.659149,1.585)); +#133747 = CIRCLE('',#133748,7.500001519549E-02); +#133748 = AXIS2_PLACEMENT_3D('',#133749,#133750,#133751); +#133749 = CARTESIAN_POINT('',(201.10831709996,-131.7303003241,1.585)); +#133750 = DIRECTION('',(0.,0.,-1.)); +#133751 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#133752 = ORIENTED_EDGE('',*,*,#133753,.T.); +#133753 = EDGE_CURVE('',#133745,#133754,#133756,.T.); +#133754 = VERTEX_POINT('',#133755); +#133755 = CARTESIAN_POINT('',(201.263344,-131.702919,1.585)); +#133756 = LINE('',#133757,#133758); +#133757 = CARTESIAN_POINT('',(201.132034,-131.659149,1.585)); +#133758 = VECTOR('',#133759,1.); +#133759 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#133760 = ORIENTED_EDGE('',*,*,#133761,.T.); +#133761 = EDGE_CURVE('',#133754,#133762,#133764,.T.); +#133762 = VERTEX_POINT('',#133763); +#133763 = CARTESIAN_POINT('',(201.471564,-131.702919,1.585)); +#133764 = LINE('',#133765,#133766); +#133765 = CARTESIAN_POINT('',(201.263344,-131.702919,1.585)); +#133766 = VECTOR('',#133767,1.); +#133767 = DIRECTION('',(1.,0.,0.)); +#133768 = ORIENTED_EDGE('',*,*,#133769,.T.); +#133769 = EDGE_CURVE('',#133762,#133770,#133772,.T.); +#133770 = VERTEX_POINT('',#133771); +#133771 = CARTESIAN_POINT('',(201.604745,-131.569737,1.585)); +#133772 = CIRCLE('',#133773,0.186867760544); +#133773 = AXIS2_PLACEMENT_3D('',#133774,#133775,#133776); +#133774 = CARTESIAN_POINT('',(201.42402496928,-131.5221993262,1.585)); +#133775 = DIRECTION('',(0.,0.,1.)); +#133776 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#133777 = ORIENTED_EDGE('',*,*,#133778,.T.); +#133778 = EDGE_CURVE('',#133770,#133779,#133781,.T.); +#133779 = VERTEX_POINT('',#133780); +#133780 = CARTESIAN_POINT('',(201.604745,-131.509909,1.585)); +#133781 = LINE('',#133782,#133783); +#133782 = CARTESIAN_POINT('',(201.604745,-131.569737,1.585)); +#133783 = VECTOR('',#133784,1.); +#133784 = DIRECTION('',(0.,1.,0.)); +#133785 = ORIENTED_EDGE('',*,*,#133786,.T.); +#133786 = EDGE_CURVE('',#133779,#133787,#133789,.T.); +#133787 = VERTEX_POINT('',#133788); +#133788 = CARTESIAN_POINT('',(201.570487,-131.441393,1.585)); +#133789 = LINE('',#133790,#133791); +#133790 = CARTESIAN_POINT('',(201.604745,-131.509909,1.585)); +#133791 = VECTOR('',#133792,1.); +#133792 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#133793 = ORIENTED_EDGE('',*,*,#133794,.T.); +#133794 = EDGE_CURVE('',#133787,#133795,#133797,.T.); +#133795 = VERTEX_POINT('',#133796); +#133796 = CARTESIAN_POINT('',(201.54008,-131.410986,1.585)); +#133797 = LINE('',#133798,#133799); +#133798 = CARTESIAN_POINT('',(201.570487,-131.441393,1.585)); +#133799 = VECTOR('',#133800,1.); +#133800 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#133801 = ORIENTED_EDGE('',*,*,#133802,.T.); +#133802 = EDGE_CURVE('',#133795,#133803,#133805,.T.); +#133803 = VERTEX_POINT('',#133804); +#133804 = CARTESIAN_POINT('',(201.463093,-131.372492,1.585)); +#133805 = LINE('',#133806,#133807); +#133806 = CARTESIAN_POINT('',(201.54008,-131.410986,1.585)); +#133807 = VECTOR('',#133808,1.); +#133808 = DIRECTION('',(-0.894424867414,0.447218242642,0.)); +#133809 = ORIENTED_EDGE('',*,*,#133810,.T.); +#133810 = EDGE_CURVE('',#133803,#133811,#133813,.T.); +#133811 = VERTEX_POINT('',#133812); +#133812 = CARTESIAN_POINT('',(201.265252,-131.321191,1.585)); +#133813 = LINE('',#133814,#133815); +#133814 = CARTESIAN_POINT('',(201.463093,-131.372492,1.585)); +#133815 = VECTOR('',#133816,1.); +#133816 = DIRECTION('',(-0.967986331989,0.251002910506,0.)); +#133817 = ORIENTED_EDGE('',*,*,#133818,.T.); +#133818 = EDGE_CURVE('',#133811,#133819,#133821,.T.); +#133819 = VERTEX_POINT('',#133820); +#133820 = CARTESIAN_POINT('',(201.156271,-131.264241,1.585)); +#133821 = LINE('',#133822,#133823); +#133822 = CARTESIAN_POINT('',(201.265252,-131.321191,1.585)); +#133823 = VECTOR('',#133824,1.); +#133824 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#133825 = ORIENTED_EDGE('',*,*,#133826,.T.); +#133826 = EDGE_CURVE('',#133819,#133827,#133829,.T.); +#133827 = VERTEX_POINT('',#133828); +#133828 = CARTESIAN_POINT('',(201.092818,-131.198711,1.585)); +#133829 = LINE('',#133830,#133831); +#133830 = CARTESIAN_POINT('',(201.156271,-131.264241,1.585)); +#133831 = VECTOR('',#133832,1.); +#133832 = DIRECTION('',(-0.695630129574,0.718400113327,0.)); +#133833 = ORIENTED_EDGE('',*,*,#133834,.T.); +#133834 = EDGE_CURVE('',#133827,#133835,#133837,.T.); +#133835 = VERTEX_POINT('',#133836); +#133836 = CARTESIAN_POINT('',(201.098184,-130.825873,1.585)); +#133837 = CIRCLE('',#133838,0.291002094877); +#133838 = AXIS2_PLACEMENT_3D('',#133839,#133840,#133841); +#133839 = CARTESIAN_POINT('',(201.31891236573,-131.0155074055,1.585)); +#133840 = DIRECTION('',(0.,0.,-1.)); +#133841 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#133842 = ORIENTED_EDGE('',*,*,#133843,.T.); +#133843 = EDGE_CURVE('',#133835,#133588,#133844,.T.); +#133844 = LINE('',#133845,#133846); +#133845 = CARTESIAN_POINT('',(201.098184,-130.825873,1.585)); +#133846 = VECTOR('',#133847,1.); +#133847 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#133848 = PLANE('',#133849); +#133849 = AXIS2_PLACEMENT_3D('',#133850,#133851,#133852); +#133850 = CARTESIAN_POINT('',(0.,0.,1.585)); +#133851 = DIRECTION('',(0.,0.,1.)); +#133852 = DIRECTION('',(1.,0.,-0.)); +#133853 = SHELL_BASED_SURFACE_MODEL('',(#133854)); +#133854 = OPEN_SHELL('',(#133855)); +#133855 = ADVANCED_FACE('',(#133856,#133957),#134032,.T.); +#133856 = FACE_BOUND('',#133857,.F.); +#133857 = EDGE_LOOP('',(#133858,#133869,#133877,#133885,#133893,#133901, + #133909,#133918,#133926,#133935,#133943,#133951)); +#133858 = ORIENTED_EDGE('',*,*,#133859,.T.); +#133859 = EDGE_CURVE('',#133860,#133862,#133864,.T.); +#133860 = VERTEX_POINT('',#133861); +#133861 = CARTESIAN_POINT('',(127.55087,-131.033961,1.585)); +#133862 = VERTEX_POINT('',#133863); +#133863 = CARTESIAN_POINT('',(127.981693,-130.936552,1.585)); +#133864 = CIRCLE('',#133865,0.670538401945); +#133865 = AXIS2_PLACEMENT_3D('',#133866,#133867,#133868); +#133866 = CARTESIAN_POINT('',(127.90590657351,-131.6027938224,1.585)); +#133867 = DIRECTION('',(0.,0.,-1.)); +#133868 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#133869 = ORIENTED_EDGE('',*,*,#133870,.T.); +#133870 = EDGE_CURVE('',#133862,#133871,#133873,.T.); +#133871 = VERTEX_POINT('',#133872); +#133872 = CARTESIAN_POINT('',(128.17438,-130.984718,1.585)); +#133873 = LINE('',#133874,#133875); +#133874 = CARTESIAN_POINT('',(127.981693,-130.936552,1.585)); +#133875 = VECTOR('',#133876,1.); +#133876 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#133877 = ORIENTED_EDGE('',*,*,#133878,.T.); +#133878 = EDGE_CURVE('',#133871,#133879,#133881,.T.); +#133879 = VERTEX_POINT('',#133880); +#133880 = CARTESIAN_POINT('',(128.276987,-131.039751,1.585)); +#133881 = LINE('',#133882,#133883); +#133882 = CARTESIAN_POINT('',(128.17438,-130.984718,1.585)); +#133883 = VECTOR('',#133884,1.); +#133884 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#133885 = ORIENTED_EDGE('',*,*,#133886,.T.); +#133886 = EDGE_CURVE('',#133879,#133887,#133889,.T.); +#133887 = VERTEX_POINT('',#133888); +#133888 = CARTESIAN_POINT('',(128.370999,-131.137884,1.585)); +#133889 = LINE('',#133890,#133891); +#133890 = CARTESIAN_POINT('',(128.276987,-131.039751,1.585)); +#133891 = VECTOR('',#133892,1.); +#133892 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#133893 = ORIENTED_EDGE('',*,*,#133894,.T.); +#133894 = EDGE_CURVE('',#133887,#133895,#133897,.T.); +#133895 = VERTEX_POINT('',#133896); +#133896 = CARTESIAN_POINT('',(128.422563,-131.289776,1.585)); +#133897 = LINE('',#133898,#133899); +#133898 = CARTESIAN_POINT('',(128.370999,-131.137884,1.585)); +#133899 = VECTOR('',#133900,1.); +#133900 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#133901 = ORIENTED_EDGE('',*,*,#133902,.T.); +#133902 = EDGE_CURVE('',#133895,#133903,#133905,.T.); +#133903 = VERTEX_POINT('',#133904); +#133904 = CARTESIAN_POINT('',(128.424597,-131.514285,1.585)); +#133905 = LINE('',#133906,#133907); +#133906 = CARTESIAN_POINT('',(128.422563,-131.289776,1.585)); +#133907 = VECTOR('',#133908,1.); +#133908 = DIRECTION('',(9.059398644849E-03,-0.999958962806,0.)); +#133909 = ORIENTED_EDGE('',*,*,#133910,.T.); +#133910 = EDGE_CURVE('',#133903,#133911,#133913,.T.); +#133911 = VERTEX_POINT('',#133912); +#133912 = CARTESIAN_POINT('',(128.359597,-131.579285,1.585)); +#133913 = CIRCLE('',#133914,6.50010393539E-02); +#133914 = AXIS2_PLACEMENT_3D('',#133915,#133916,#133917); +#133915 = CARTESIAN_POINT('',(128.35959596065,-131.5142839606,1.585)); +#133916 = DIRECTION('',(0.,0.,-1.)); +#133917 = DIRECTION('',(0.999999999872,-1.598967649219E-05,0.)); +#133918 = ORIENTED_EDGE('',*,*,#133919,.T.); +#133919 = EDGE_CURVE('',#133911,#133920,#133922,.T.); +#133920 = VERTEX_POINT('',#133921); +#133921 = CARTESIAN_POINT('',(127.459597,-131.579285,1.585)); +#133922 = LINE('',#133923,#133924); +#133923 = CARTESIAN_POINT('',(128.359597,-131.579285,1.585)); +#133924 = VECTOR('',#133925,1.); +#133925 = DIRECTION('',(-1.,0.,0.)); +#133926 = ORIENTED_EDGE('',*,*,#133927,.T.); +#133927 = EDGE_CURVE('',#133920,#133928,#133930,.T.); +#133928 = VERTEX_POINT('',#133929); +#133929 = CARTESIAN_POINT('',(127.394597,-131.514285,1.585)); +#133930 = CIRCLE('',#133931,6.500103935386E-02); +#133931 = AXIS2_PLACEMENT_3D('',#133932,#133933,#133934); +#133932 = CARTESIAN_POINT('',(127.45959803934,-131.5142839606,1.585)); +#133933 = DIRECTION('',(0.,0.,-1.)); +#133934 = DIRECTION('',(-1.59896756177E-05,-0.999999999872,-0.)); +#133935 = ORIENTED_EDGE('',*,*,#133936,.T.); +#133936 = EDGE_CURVE('',#133928,#133937,#133939,.T.); +#133937 = VERTEX_POINT('',#133938); +#133938 = CARTESIAN_POINT('',(127.39663,-131.289776,1.585)); +#133939 = LINE('',#133940,#133941); +#133940 = CARTESIAN_POINT('',(127.394597,-131.514285,1.585)); +#133941 = VECTOR('',#133942,1.); +#133942 = DIRECTION('',(9.054945028443E-03,0.999959003145,0.)); +#133943 = ORIENTED_EDGE('',*,*,#133944,.T.); +#133944 = EDGE_CURVE('',#133937,#133945,#133947,.T.); +#133945 = VERTEX_POINT('',#133946); +#133946 = CARTESIAN_POINT('',(127.448191,-131.137888,1.585)); +#133947 = LINE('',#133948,#133949); +#133948 = CARTESIAN_POINT('',(127.39663,-131.289776,1.585)); +#133949 = VECTOR('',#133950,1.); +#133950 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#133951 = ORIENTED_EDGE('',*,*,#133952,.T.); +#133952 = EDGE_CURVE('',#133945,#133860,#133953,.T.); +#133953 = LINE('',#133954,#133955); +#133954 = CARTESIAN_POINT('',(127.448191,-131.137888,1.585)); +#133955 = VECTOR('',#133956,1.); +#133956 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#133957 = FACE_BOUND('',#133958,.F.); +#133958 = EDGE_LOOP('',(#133959,#133970,#133978,#133986,#133994,#134002, + #134010,#134018,#134026)); +#133959 = ORIENTED_EDGE('',*,*,#133960,.T.); +#133960 = EDGE_CURVE('',#133961,#133963,#133965,.T.); +#133961 = VERTEX_POINT('',#133962); +#133962 = CARTESIAN_POINT('',(128.122622,-131.104184,1.585)); +#133963 = VERTEX_POINT('',#133964); +#133964 = CARTESIAN_POINT('',(127.626669,-131.139134,1.585)); +#133965 = CIRCLE('',#133966,0.559258743581); +#133966 = AXIS2_PLACEMENT_3D('',#133967,#133968,#133969); +#133967 = CARTESIAN_POINT('',(127.90986183298,-131.6213913603,1.585)); +#133968 = DIRECTION('',(0.,0.,1.)); +#133969 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#133970 = ORIENTED_EDGE('',*,*,#133971,.T.); +#133971 = EDGE_CURVE('',#133963,#133972,#133974,.T.); +#133972 = VERTEX_POINT('',#133973); +#133973 = CARTESIAN_POINT('',(127.559265,-131.20654,1.585)); +#133974 = LINE('',#133975,#133976); +#133975 = CARTESIAN_POINT('',(127.626669,-131.139134,1.585)); +#133976 = VECTOR('',#133977,1.); +#133977 = DIRECTION('',(-0.707096290689,-0.707117271529,0.)); +#133978 = ORIENTED_EDGE('',*,*,#133979,.T.); +#133979 = EDGE_CURVE('',#133972,#133980,#133982,.T.); +#133980 = VERTEX_POINT('',#133981); +#133981 = CARTESIAN_POINT('',(127.524597,-131.310546,1.585)); +#133982 = LINE('',#133983,#133984); +#133983 = CARTESIAN_POINT('',(127.559265,-131.20654,1.585)); +#133984 = VECTOR('',#133985,1.); +#133985 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#133986 = ORIENTED_EDGE('',*,*,#133987,.T.); +#133987 = EDGE_CURVE('',#133980,#133988,#133990,.T.); +#133988 = VERTEX_POINT('',#133989); +#133989 = CARTESIAN_POINT('',(127.524597,-131.449285,1.585)); +#133990 = LINE('',#133991,#133992); +#133991 = CARTESIAN_POINT('',(127.524597,-131.310546,1.585)); +#133992 = VECTOR('',#133993,1.); +#133993 = DIRECTION('',(0.,-1.,0.)); +#133994 = ORIENTED_EDGE('',*,*,#133995,.T.); +#133995 = EDGE_CURVE('',#133988,#133996,#133998,.T.); +#133996 = VERTEX_POINT('',#133997); +#133997 = CARTESIAN_POINT('',(128.294597,-131.449285,1.585)); +#133998 = LINE('',#133999,#134000); +#133999 = CARTESIAN_POINT('',(127.524597,-131.449285,1.585)); +#134000 = VECTOR('',#134001,1.); +#134001 = DIRECTION('',(1.,0.,0.)); +#134002 = ORIENTED_EDGE('',*,*,#134003,.T.); +#134003 = EDGE_CURVE('',#133996,#134004,#134006,.T.); +#134004 = VERTEX_POINT('',#134005); +#134005 = CARTESIAN_POINT('',(128.294597,-131.310546,1.585)); +#134006 = LINE('',#134007,#134008); +#134007 = CARTESIAN_POINT('',(128.294597,-131.449285,1.585)); +#134008 = VECTOR('',#134009,1.); +#134009 = DIRECTION('',(0.,1.,0.)); +#134010 = ORIENTED_EDGE('',*,*,#134011,.T.); +#134011 = EDGE_CURVE('',#134004,#134012,#134014,.T.); +#134012 = VERTEX_POINT('',#134013); +#134013 = CARTESIAN_POINT('',(128.259928,-131.20654,1.585)); +#134014 = LINE('',#134015,#134016); +#134015 = CARTESIAN_POINT('',(128.294597,-131.310546,1.585)); +#134016 = VECTOR('',#134017,1.); +#134017 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#134018 = ORIENTED_EDGE('',*,*,#134019,.T.); +#134019 = EDGE_CURVE('',#134012,#134020,#134022,.T.); +#134020 = VERTEX_POINT('',#134021); +#134021 = CARTESIAN_POINT('',(128.192522,-131.139134,1.585)); +#134022 = LINE('',#134023,#134024); +#134023 = CARTESIAN_POINT('',(128.259928,-131.20654,1.585)); +#134024 = VECTOR('',#134025,1.); +#134025 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#134026 = ORIENTED_EDGE('',*,*,#134027,.T.); +#134027 = EDGE_CURVE('',#134020,#133961,#134028,.T.); +#134028 = LINE('',#134029,#134030); +#134029 = CARTESIAN_POINT('',(128.192522,-131.139134,1.585)); +#134030 = VECTOR('',#134031,1.); +#134031 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#134032 = PLANE('',#134033); +#134033 = AXIS2_PLACEMENT_3D('',#134034,#134035,#134036); +#134034 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134035 = DIRECTION('',(0.,0.,1.)); +#134036 = DIRECTION('',(1.,0.,-0.)); +#134037 = SHELL_BASED_SURFACE_MODEL('',(#134038)); +#134038 = OPEN_SHELL('',(#134039)); +#134039 = ADVANCED_FACE('',(#134040),#134117,.T.); +#134040 = FACE_BOUND('',#134041,.F.); +#134041 = EDGE_LOOP('',(#134042,#134053,#134061,#134070,#134078,#134087, + #134095,#134103,#134111)); +#134042 = ORIENTED_EDGE('',*,*,#134043,.T.); +#134043 = EDGE_CURVE('',#134044,#134046,#134048,.T.); +#134044 = VERTEX_POINT('',#134045); +#134045 = CARTESIAN_POINT('',(124.854761,-130.733178,1.585)); +#134046 = VERTEX_POINT('',#134047); +#134047 = CARTESIAN_POINT('',(124.940152,-130.666907,1.585)); +#134048 = CIRCLE('',#134049,6.499990070437E-02); +#134049 = AXIS2_PLACEMENT_3D('',#134050,#134051,#134052); +#134050 = CARTESIAN_POINT('',(124.91959745813,-130.7285713973,1.585)); +#134051 = DIRECTION('',(0.,0.,-1.)); +#134052 = DIRECTION('',(-0.997485495103,-7.087091829045E-02,-0.)); +#134053 = ORIENTED_EDGE('',*,*,#134054,.T.); +#134054 = EDGE_CURVE('',#134046,#134055,#134057,.T.); +#134055 = VERTEX_POINT('',#134056); +#134056 = CARTESIAN_POINT('',(125.840152,-130.966906,1.585)); +#134057 = LINE('',#134058,#134059); +#134058 = CARTESIAN_POINT('',(124.940152,-130.666907,1.585)); +#134059 = VECTOR('',#134060,1.); +#134060 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#134061 = ORIENTED_EDGE('',*,*,#134062,.T.); +#134062 = EDGE_CURVE('',#134055,#134063,#134065,.T.); +#134063 = VERTEX_POINT('',#134064); +#134064 = CARTESIAN_POINT('',(125.840152,-131.090236,1.585)); +#134065 = CIRCLE('',#134066,6.500111611218E-02); +#134066 = AXIS2_PLACEMENT_3D('',#134067,#134068,#134069); +#134067 = CARTESIAN_POINT('',(125.81959542268,-131.028571,1.585)); +#134068 = DIRECTION('',(0.,0.,-1.)); +#134069 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#134070 = ORIENTED_EDGE('',*,*,#134071,.T.); +#134071 = EDGE_CURVE('',#134063,#134072,#134074,.T.); +#134072 = VERTEX_POINT('',#134073); +#134073 = CARTESIAN_POINT('',(124.940152,-131.390235,1.585)); +#134074 = LINE('',#134075,#134076); +#134075 = CARTESIAN_POINT('',(125.840152,-131.090236,1.585)); +#134076 = VECTOR('',#134077,1.); +#134077 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#134078 = ORIENTED_EDGE('',*,*,#134079,.T.); +#134079 = EDGE_CURVE('',#134072,#134080,#134082,.T.); +#134080 = VERTEX_POINT('',#134081); +#134081 = CARTESIAN_POINT('',(124.899042,-131.266907,1.585)); +#134082 = CIRCLE('',#134083,6.499966862237E-02); +#134083 = AXIS2_PLACEMENT_3D('',#134084,#134085,#134086); +#134084 = CARTESIAN_POINT('',(124.91959712923,-131.3285709569,1.585)); +#134085 = DIRECTION('',(0.,0.,-1.)); +#134086 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#134087 = ORIENTED_EDGE('',*,*,#134088,.T.); +#134088 = EDGE_CURVE('',#134080,#134089,#134091,.T.); +#134089 = VERTEX_POINT('',#134090); +#134090 = CARTESIAN_POINT('',(125.61405,-131.028571,1.585)); +#134091 = LINE('',#134092,#134093); +#134092 = CARTESIAN_POINT('',(124.899042,-131.266907,1.585)); +#134093 = VECTOR('',#134094,1.); +#134094 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#134095 = ORIENTED_EDGE('',*,*,#134096,.T.); +#134096 = EDGE_CURVE('',#134089,#134097,#134099,.T.); +#134097 = VERTEX_POINT('',#134098); +#134098 = CARTESIAN_POINT('',(124.899042,-130.790235,1.585)); +#134099 = LINE('',#134100,#134101); +#134100 = CARTESIAN_POINT('',(125.61405,-131.028571,1.585)); +#134101 = VECTOR('',#134102,1.); +#134102 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#134103 = ORIENTED_EDGE('',*,*,#134104,.T.); +#134104 = EDGE_CURVE('',#134097,#134105,#134107,.T.); +#134105 = VERTEX_POINT('',#134106); +#134106 = CARTESIAN_POINT('',(124.877009,-130.777675,1.585)); +#134107 = LINE('',#134108,#134109); +#134108 = CARTESIAN_POINT('',(124.899042,-130.790235,1.585)); +#134109 = VECTOR('',#134110,1.); +#134110 = DIRECTION('',(-0.868757082858,0.495238458708,0.)); +#134111 = ORIENTED_EDGE('',*,*,#134112,.T.); +#134112 = EDGE_CURVE('',#134105,#134044,#134113,.T.); +#134113 = LINE('',#134114,#134115); +#134114 = CARTESIAN_POINT('',(124.877009,-130.777675,1.585)); +#134115 = VECTOR('',#134116,1.); +#134116 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#134117 = PLANE('',#134118); +#134118 = AXIS2_PLACEMENT_3D('',#134119,#134120,#134121); +#134119 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134120 = DIRECTION('',(0.,0.,1.)); +#134121 = DIRECTION('',(1.,0.,-0.)); +#134122 = SHELL_BASED_SURFACE_MODEL('',(#134123)); +#134123 = OPEN_SHELL('',(#134124)); +#134124 = ADVANCED_FACE('',(#134125),#134311,.T.); +#134125 = FACE_BOUND('',#134126,.F.); +#134126 = EDGE_LOOP('',(#134127,#134138,#134146,#134154,#134162,#134170, + #134179,#134187,#134196,#134204,#134213,#134221,#134230,#134238, + #134246,#134254,#134263,#134271,#134279,#134288,#134296,#134305)); +#134127 = ORIENTED_EDGE('',*,*,#134128,.T.); +#134128 = EDGE_CURVE('',#134129,#134131,#134133,.T.); +#134129 = VERTEX_POINT('',#134130); +#134130 = CARTESIAN_POINT('',(117.580369,-130.685342,1.585)); +#134131 = VERTEX_POINT('',#134132); +#134132 = CARTESIAN_POINT('',(117.799225,-130.466485,1.585)); +#134133 = CIRCLE('',#134134,0.308109459502); +#134134 = AXIS2_PLACEMENT_3D('',#134135,#134136,#134137); +#134135 = CARTESIAN_POINT('',(117.87818845359,-130.7643040927,1.585)); +#134136 = DIRECTION('',(0.,0.,-1.)); +#134137 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#134138 = ORIENTED_EDGE('',*,*,#134139,.T.); +#134139 = EDGE_CURVE('',#134131,#134140,#134142,.T.); +#134140 = VERTEX_POINT('',#134141); +#134141 = CARTESIAN_POINT('',(118.031361,-130.464205,1.585)); +#134142 = LINE('',#134143,#134144); +#134143 = CARTESIAN_POINT('',(117.799225,-130.466485,1.585)); +#134144 = VECTOR('',#134145,1.); +#134145 = DIRECTION('',(0.999951769331,9.821354869939E-03,0.)); +#134146 = ORIENTED_EDGE('',*,*,#134147,.T.); +#134147 = EDGE_CURVE('',#134140,#134148,#134150,.T.); +#134148 = VERTEX_POINT('',#134149); +#134149 = CARTESIAN_POINT('',(118.057237,-130.470432,1.585)); +#134150 = LINE('',#134151,#134152); +#134151 = CARTESIAN_POINT('',(118.031361,-130.464205,1.585)); +#134152 = VECTOR('',#134153,1.); +#134153 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#134154 = ORIENTED_EDGE('',*,*,#134155,.T.); +#134155 = EDGE_CURVE('',#134148,#134156,#134158,.T.); +#134156 = VERTEX_POINT('',#134157); +#134157 = CARTESIAN_POINT('',(118.159844,-130.525465,1.585)); +#134158 = LINE('',#134159,#134160); +#134159 = CARTESIAN_POINT('',(118.057237,-130.470432,1.585)); +#134160 = VECTOR('',#134161,1.); +#134161 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#134162 = ORIENTED_EDGE('',*,*,#134163,.T.); +#134163 = EDGE_CURVE('',#134156,#134164,#134166,.T.); +#134164 = VERTEX_POINT('',#134165); +#134165 = CARTESIAN_POINT('',(118.214878,-130.585216,1.585)); +#134166 = LINE('',#134167,#134168); +#134167 = CARTESIAN_POINT('',(118.159844,-130.525465,1.585)); +#134168 = VECTOR('',#134169,1.); +#134169 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#134170 = ORIENTED_EDGE('',*,*,#134171,.T.); +#134171 = EDGE_CURVE('',#134164,#134172,#134174,.T.); +#134172 = VERTEX_POINT('',#134173); +#134173 = CARTESIAN_POINT('',(118.208491,-131.080153,1.585)); +#134174 = CIRCLE('',#134175,0.457783772261); +#134175 = AXIS2_PLACEMENT_3D('',#134176,#134177,#134178); +#134176 = CARTESIAN_POINT('',(117.82659953493,-130.8277151045,1.585)); +#134177 = DIRECTION('',(0.,0.,-1.)); +#134178 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#134179 = ORIENTED_EDGE('',*,*,#134180,.T.); +#134180 = EDGE_CURVE('',#134172,#134181,#134183,.T.); +#134181 = VERTEX_POINT('',#134182); +#134182 = CARTESIAN_POINT('',(118.159843,-131.131675,1.585)); +#134183 = LINE('',#134184,#134185); +#134184 = CARTESIAN_POINT('',(118.208491,-131.080153,1.585)); +#134185 = VECTOR('',#134186,1.); +#134186 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#134187 = ORIENTED_EDGE('',*,*,#134188,.T.); +#134188 = EDGE_CURVE('',#134181,#134189,#134191,.T.); +#134189 = VERTEX_POINT('',#134190); +#134190 = CARTESIAN_POINT('',(118.067921,-131.039751,1.585)); +#134191 = CIRCLE('',#134192,6.499937665136E-02); +#134192 = AXIS2_PLACEMENT_3D('',#134193,#134194,#134195); +#134193 = CARTESIAN_POINT('',(118.11388218097,-131.085712819,1.585)); +#134194 = DIRECTION('',(-0.,0.,-1.)); +#134195 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#134196 = ORIENTED_EDGE('',*,*,#134197,.T.); +#134197 = EDGE_CURVE('',#134189,#134198,#134200,.T.); +#134198 = VERTEX_POINT('',#134199); +#134199 = CARTESIAN_POINT('',(118.103319,-131.004353,1.585)); +#134200 = LINE('',#134201,#134202); +#134201 = CARTESIAN_POINT('',(118.067921,-131.039751,1.585)); +#134202 = VECTOR('',#134203,1.); +#134203 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#134204 = ORIENTED_EDGE('',*,*,#134205,.T.); +#134205 = EDGE_CURVE('',#134198,#134206,#134208,.T.); +#134206 = VERTEX_POINT('',#134207); +#134207 = CARTESIAN_POINT('',(118.103319,-130.652788,1.585)); +#134208 = CIRCLE('',#134209,0.325008683278); +#134209 = AXIS2_PLACEMENT_3D('',#134210,#134211,#134212); +#134210 = CARTESIAN_POINT('',(117.829949,-130.8285705,1.585)); +#134211 = DIRECTION('',(0.,-0.,1.)); +#134212 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#134213 = ORIENTED_EDGE('',*,*,#134214,.T.); +#134214 = EDGE_CURVE('',#134206,#134215,#134217,.T.); +#134215 = VERTEX_POINT('',#134216); +#134216 = CARTESIAN_POINT('',(118.075379,-130.624848,1.585)); +#134217 = LINE('',#134218,#134219); +#134218 = CARTESIAN_POINT('',(118.103319,-130.652788,1.585)); +#134219 = VECTOR('',#134220,1.); +#134220 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#134221 = ORIENTED_EDGE('',*,*,#134222,.T.); +#134222 = EDGE_CURVE('',#134215,#134223,#134225,.T.); +#134223 = VERTEX_POINT('',#134224); +#134224 = CARTESIAN_POINT('',(117.766671,-130.624848,1.585)); +#134225 = CIRCLE('',#134226,0.277419178294); +#134226 = AXIS2_PLACEMENT_3D('',#134227,#134228,#134229); +#134227 = CARTESIAN_POINT('',(117.921025,-130.855361,1.585)); +#134228 = DIRECTION('',(0.,0.,1.)); +#134229 = DIRECTION('',(0.556392679661,0.830919482273,-0.)); +#134230 = ORIENTED_EDGE('',*,*,#134231,.T.); +#134231 = EDGE_CURVE('',#134223,#134232,#134234,.T.); +#134232 = VERTEX_POINT('',#134233); +#134233 = CARTESIAN_POINT('',(117.738733,-130.652786,1.585)); +#134234 = LINE('',#134235,#134236); +#134235 = CARTESIAN_POINT('',(117.766671,-130.624848,1.585)); +#134236 = VECTOR('',#134237,1.); +#134237 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#134238 = ORIENTED_EDGE('',*,*,#134239,.T.); +#134239 = EDGE_CURVE('',#134232,#134240,#134242,.T.); +#134240 = VERTEX_POINT('',#134241); +#134241 = CARTESIAN_POINT('',(117.707454,-130.715344,1.585)); +#134242 = LINE('',#134243,#134244); +#134243 = CARTESIAN_POINT('',(117.738733,-130.652786,1.585)); +#134244 = VECTOR('',#134245,1.); +#134245 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#134246 = ORIENTED_EDGE('',*,*,#134247,.T.); +#134247 = EDGE_CURVE('',#134240,#134248,#134250,.T.); +#134248 = VERTEX_POINT('',#134249); +#134249 = CARTESIAN_POINT('',(117.707454,-130.82857,1.585)); +#134250 = LINE('',#134251,#134252); +#134251 = CARTESIAN_POINT('',(117.707454,-130.715344,1.585)); +#134252 = VECTOR('',#134253,1.); +#134253 = DIRECTION('',(0.,-1.,0.)); +#134254 = ORIENTED_EDGE('',*,*,#134255,.T.); +#134255 = EDGE_CURVE('',#134248,#134256,#134258,.T.); +#134256 = VERTEX_POINT('',#134257); +#134257 = CARTESIAN_POINT('',(117.599652,-130.877488,1.585)); +#134258 = CIRCLE('',#134259,6.500010429712E-02); +#134259 = AXIS2_PLACEMENT_3D('',#134260,#134261,#134262); +#134260 = CARTESIAN_POINT('',(117.6424538957,-130.8285695854,1.585)); +#134261 = DIRECTION('',(-0.,0.,-1.)); +#134262 = DIRECTION('',(0.99999999998,-6.377789005543E-06,-0.)); +#134263 = ORIENTED_EDGE('',*,*,#134264,.T.); +#134264 = EDGE_CURVE('',#134256,#134265,#134267,.T.); +#134265 = VERTEX_POINT('',#134266); +#134266 = CARTESIAN_POINT('',(117.364597,-130.671814,1.585)); +#134267 = LINE('',#134268,#134269); +#134268 = CARTESIAN_POINT('',(117.599652,-130.877488,1.585)); +#134269 = VECTOR('',#134270,1.); +#134270 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#134271 = ORIENTED_EDGE('',*,*,#134272,.T.); +#134272 = EDGE_CURVE('',#134265,#134273,#134275,.T.); +#134273 = VERTEX_POINT('',#134274); +#134274 = CARTESIAN_POINT('',(117.364597,-131.085713,1.585)); +#134275 = LINE('',#134276,#134277); +#134276 = CARTESIAN_POINT('',(117.364597,-130.671814,1.585)); +#134277 = VECTOR('',#134278,1.); +#134278 = DIRECTION('',(0.,-1.,0.)); +#134279 = ORIENTED_EDGE('',*,*,#134280,.T.); +#134280 = EDGE_CURVE('',#134273,#134281,#134283,.T.); +#134281 = VERTEX_POINT('',#134282); +#134282 = CARTESIAN_POINT('',(117.234597,-131.085713,1.585)); +#134283 = CIRCLE('',#134284,6.500000000092E-02); +#134284 = AXIS2_PLACEMENT_3D('',#134285,#134286,#134287); +#134285 = CARTESIAN_POINT('',(117.299597,-131.0857126551,1.585)); +#134286 = DIRECTION('',(-0.,0.,-1.)); +#134287 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#134288 = ORIENTED_EDGE('',*,*,#134289,.T.); +#134289 = EDGE_CURVE('',#134281,#134290,#134292,.T.); +#134290 = VERTEX_POINT('',#134291); +#134291 = CARTESIAN_POINT('',(117.234597,-130.52857,1.585)); +#134292 = LINE('',#134293,#134294); +#134293 = CARTESIAN_POINT('',(117.234597,-131.085713,1.585)); +#134294 = VECTOR('',#134295,1.); +#134295 = DIRECTION('',(0.,1.,0.)); +#134296 = ORIENTED_EDGE('',*,*,#134297,.T.); +#134297 = EDGE_CURVE('',#134290,#134298,#134300,.T.); +#134298 = VERTEX_POINT('',#134299); +#134299 = CARTESIAN_POINT('',(117.3424,-130.479653,1.585)); +#134300 = CIRCLE('',#134301,6.500002288382E-02); +#134301 = AXIS2_PLACEMENT_3D('',#134302,#134303,#134304); +#134302 = CARTESIAN_POINT('',(117.29959702288,-130.5285703601,1.585)); +#134303 = DIRECTION('',(0.,0.,-1.)); +#134304 = DIRECTION('',(-0.999999999985,5.540886822725E-06,0.)); +#134305 = ORIENTED_EDGE('',*,*,#134306,.T.); +#134306 = EDGE_CURVE('',#134298,#134129,#134307,.T.); +#134307 = LINE('',#134308,#134309); +#134308 = CARTESIAN_POINT('',(117.3424,-130.479653,1.585)); +#134309 = VECTOR('',#134310,1.); +#134310 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#134311 = PLANE('',#134312); +#134312 = AXIS2_PLACEMENT_3D('',#134313,#134314,#134315); +#134313 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134314 = DIRECTION('',(0.,0.,1.)); +#134315 = DIRECTION('',(1.,0.,-0.)); +#134316 = SHELL_BASED_SURFACE_MODEL('',(#134317)); +#134317 = OPEN_SHELL('',(#134318)); +#134318 = ADVANCED_FACE('',(#134319),#134355,.T.); +#134319 = FACE_BOUND('',#134320,.F.); +#134320 = EDGE_LOOP('',(#134321,#134332,#134340,#134349)); +#134321 = ORIENTED_EDGE('',*,*,#134322,.T.); +#134322 = EDGE_CURVE('',#134323,#134325,#134327,.T.); +#134323 = VERTEX_POINT('',#134324); +#134324 = CARTESIAN_POINT('',(159.675,-128.805,1.585)); +#134325 = VERTEX_POINT('',#134326); +#134326 = CARTESIAN_POINT('',(159.675,-128.685,1.585)); +#134327 = CIRCLE('',#134328,6.000000000043E-02); +#134328 = AXIS2_PLACEMENT_3D('',#134329,#134330,#134331); +#134329 = CARTESIAN_POINT('',(159.67499977441,-128.745,1.585)); +#134330 = DIRECTION('',(0.,0.,-1.)); +#134331 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#134332 = ORIENTED_EDGE('',*,*,#134333,.T.); +#134333 = EDGE_CURVE('',#134325,#134334,#134336,.T.); +#134334 = VERTEX_POINT('',#134335); +#134335 = CARTESIAN_POINT('',(168.625,-128.685,1.585)); +#134336 = LINE('',#134337,#134338); +#134337 = CARTESIAN_POINT('',(159.675,-128.685,1.585)); +#134338 = VECTOR('',#134339,1.); +#134339 = DIRECTION('',(1.,0.,0.)); +#134340 = ORIENTED_EDGE('',*,*,#134341,.T.); +#134341 = EDGE_CURVE('',#134334,#134342,#134344,.T.); +#134342 = VERTEX_POINT('',#134343); +#134343 = CARTESIAN_POINT('',(168.625,-128.805,1.585)); +#134344 = CIRCLE('',#134345,6.000000000042E-02); +#134345 = AXIS2_PLACEMENT_3D('',#134346,#134347,#134348); +#134346 = CARTESIAN_POINT('',(168.62500022558,-128.745,1.585)); +#134347 = DIRECTION('',(0.,0.,-1.)); +#134348 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#134349 = ORIENTED_EDGE('',*,*,#134350,.T.); +#134350 = EDGE_CURVE('',#134342,#134323,#134351,.T.); +#134351 = LINE('',#134352,#134353); +#134352 = CARTESIAN_POINT('',(168.625,-128.805,1.585)); +#134353 = VECTOR('',#134354,1.); +#134354 = DIRECTION('',(-1.,0.,0.)); +#134355 = PLANE('',#134356); +#134356 = AXIS2_PLACEMENT_3D('',#134357,#134358,#134359); +#134357 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134358 = DIRECTION('',(0.,0.,1.)); +#134359 = DIRECTION('',(1.,0.,-0.)); +#134360 = SHELL_BASED_SURFACE_MODEL('',(#134361)); +#134361 = OPEN_SHELL('',(#134362)); +#134362 = ADVANCED_FACE('',(#134363,#134448),#134507,.T.); +#134363 = FACE_BOUND('',#134364,.F.); +#134364 = EDGE_LOOP('',(#134365,#134376,#134384,#134392,#134400,#134409, + #134417,#134426,#134434,#134442)); +#134365 = ORIENTED_EDGE('',*,*,#134366,.T.); +#134366 = EDGE_CURVE('',#134367,#134369,#134371,.T.); +#134367 = VERTEX_POINT('',#134368); +#134368 = CARTESIAN_POINT('',(182.201866,-127.654267,1.585)); +#134369 = VERTEX_POINT('',#134370); +#134370 = CARTESIAN_POINT('',(182.685776,-127.725163,1.585)); +#134371 = CIRCLE('',#134372,0.34461174713); +#134372 = AXIS2_PLACEMENT_3D('',#134373,#134374,#134375); +#134373 = CARTESIAN_POINT('',(182.40862294377,-127.9299639757,1.585)); +#134374 = DIRECTION('',(0.,0.,-1.)); +#134375 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#134376 = ORIENTED_EDGE('',*,*,#134377,.T.); +#134377 = EDGE_CURVE('',#134369,#134378,#134380,.T.); +#134378 = VERTEX_POINT('',#134379); +#134379 = CARTESIAN_POINT('',(182.743837,-127.84561,1.585)); +#134380 = LINE('',#134381,#134382); +#134381 = CARTESIAN_POINT('',(182.685776,-127.725163,1.585)); +#134382 = VECTOR('',#134383,1.); +#134383 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#134384 = ORIENTED_EDGE('',*,*,#134385,.T.); +#134385 = EDGE_CURVE('',#134378,#134386,#134388,.T.); +#134386 = VERTEX_POINT('',#134387); +#134387 = CARTESIAN_POINT('',(182.745278,-128.166194,1.585)); +#134388 = LINE('',#134389,#134390); +#134389 = CARTESIAN_POINT('',(182.743837,-127.84561,1.585)); +#134390 = VECTOR('',#134391,1.); +#134391 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#134392 = ORIENTED_EDGE('',*,*,#134393,.T.); +#134393 = EDGE_CURVE('',#134386,#134394,#134396,.T.); +#134394 = VERTEX_POINT('',#134395); +#134395 = CARTESIAN_POINT('',(183.161101,-128.167635,1.585)); +#134396 = LINE('',#134397,#134398); +#134397 = CARTESIAN_POINT('',(182.745278,-128.166194,1.585)); +#134398 = VECTOR('',#134399,1.); +#134399 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#134400 = ORIENTED_EDGE('',*,*,#134401,.T.); +#134401 = EDGE_CURVE('',#134394,#134402,#134404,.T.); +#134402 = VERTEX_POINT('',#134403); +#134403 = CARTESIAN_POINT('',(183.146469,-128.316194,1.585)); +#134404 = CIRCLE('',#134405,7.500006711465E-02); +#134405 = AXIS2_PLACEMENT_3D('',#134406,#134407,#134408); +#134406 = CARTESIAN_POINT('',(183.14646906711,-128.2411939328,1.585)); +#134407 = DIRECTION('',(0.,0.,-1.)); +#134408 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#134409 = ORIENTED_EDGE('',*,*,#134410,.T.); +#134410 = EDGE_CURVE('',#134402,#134411,#134413,.T.); +#134411 = VERTEX_POINT('',#134412); +#134412 = CARTESIAN_POINT('',(182.131837,-128.314753,1.585)); +#134413 = LINE('',#134414,#134415); +#134414 = CARTESIAN_POINT('',(183.146469,-128.316194,1.585)); +#134415 = VECTOR('',#134416,1.); +#134416 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#134417 = ORIENTED_EDGE('',*,*,#134418,.T.); +#134418 = EDGE_CURVE('',#134411,#134419,#134421,.T.); +#134419 = VERTEX_POINT('',#134420); +#134420 = CARTESIAN_POINT('',(182.071469,-128.241194,1.585)); +#134421 = CIRCLE('',#134422,7.500074938984E-02); +#134422 = AXIS2_PLACEMENT_3D('',#134423,#134424,#134425); +#134423 = CARTESIAN_POINT('',(182.14646974938,-128.2411935338,1.585)); +#134424 = DIRECTION('',(0.,0.,-1.)); +#134425 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#134426 = ORIENTED_EDGE('',*,*,#134427,.T.); +#134427 = EDGE_CURVE('',#134419,#134428,#134430,.T.); +#134428 = VERTEX_POINT('',#134429); +#134429 = CARTESIAN_POINT('',(182.074132,-127.840433,1.585)); +#134430 = LINE('',#134431,#134432); +#134431 = CARTESIAN_POINT('',(182.071469,-128.241194,1.585)); +#134432 = VECTOR('',#134433,1.); +#134433 = DIRECTION('',(6.644711463175E-03,0.999977923661,0.)); +#134434 = ORIENTED_EDGE('',*,*,#134435,.T.); +#134435 = EDGE_CURVE('',#134428,#134436,#134438,.T.); +#134436 = VERTEX_POINT('',#134437); +#134437 = CARTESIAN_POINT('',(182.136336,-127.71772,1.585)); +#134438 = LINE('',#134439,#134440); +#134439 = CARTESIAN_POINT('',(182.074132,-127.840433,1.585)); +#134440 = VECTOR('',#134441,1.); +#134441 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#134442 = ORIENTED_EDGE('',*,*,#134443,.T.); +#134443 = EDGE_CURVE('',#134436,#134367,#134444,.T.); +#134444 = LINE('',#134445,#134446); +#134445 = CARTESIAN_POINT('',(182.136336,-127.71772,1.585)); +#134446 = VECTOR('',#134447,1.); +#134447 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#134448 = FACE_BOUND('',#134449,.F.); +#134449 = EDGE_LOOP('',(#134450,#134461,#134469,#134477,#134485,#134493, + #134501)); +#134450 = ORIENTED_EDGE('',*,*,#134451,.T.); +#134451 = EDGE_CURVE('',#134452,#134454,#134456,.T.); +#134452 = VERTEX_POINT('',#134453); +#134453 = CARTESIAN_POINT('',(182.530613,-127.779024,1.585)); +#134454 = VERTEX_POINT('',#134455); +#134455 = CARTESIAN_POINT('',(182.255727,-127.809431,1.585)); +#134456 = CIRCLE('',#134457,0.198386215365); +#134457 = AXIS2_PLACEMENT_3D('',#134458,#134459,#134460); +#134458 = CARTESIAN_POINT('',(182.40880995783,-127.9356161753,1.585)); +#134459 = DIRECTION('',(0.,0.,1.)); +#134460 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#134461 = ORIENTED_EDGE('',*,*,#134462,.T.); +#134462 = EDGE_CURVE('',#134454,#134463,#134465,.T.); +#134463 = VERTEX_POINT('',#134464); +#134464 = CARTESIAN_POINT('',(182.221469,-127.877947,1.585)); +#134465 = LINE('',#134466,#134467); +#134466 = CARTESIAN_POINT('',(182.255727,-127.809431,1.585)); +#134467 = VECTOR('',#134468,1.); +#134468 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#134469 = ORIENTED_EDGE('',*,*,#134470,.T.); +#134470 = EDGE_CURVE('',#134463,#134471,#134473,.T.); +#134471 = VERTEX_POINT('',#134472); +#134472 = CARTESIAN_POINT('',(182.221469,-128.166194,1.585)); +#134473 = LINE('',#134474,#134475); +#134474 = CARTESIAN_POINT('',(182.221469,-127.877947,1.585)); +#134475 = VECTOR('',#134476,1.); +#134476 = DIRECTION('',(0.,-1.,0.)); +#134477 = ORIENTED_EDGE('',*,*,#134478,.T.); +#134478 = EDGE_CURVE('',#134471,#134479,#134481,.T.); +#134479 = VERTEX_POINT('',#134480); +#134480 = CARTESIAN_POINT('',(182.595278,-128.166194,1.585)); +#134481 = LINE('',#134482,#134483); +#134482 = CARTESIAN_POINT('',(182.221469,-128.166194,1.585)); +#134483 = VECTOR('',#134484,1.); +#134484 = DIRECTION('',(1.,0.,0.)); +#134485 = ORIENTED_EDGE('',*,*,#134486,.T.); +#134486 = EDGE_CURVE('',#134479,#134487,#134489,.T.); +#134487 = VERTEX_POINT('',#134488); +#134488 = CARTESIAN_POINT('',(182.595278,-127.877947,1.585)); +#134489 = LINE('',#134490,#134491); +#134490 = CARTESIAN_POINT('',(182.595278,-128.166194,1.585)); +#134491 = VECTOR('',#134492,1.); +#134492 = DIRECTION('',(0.,1.,0.)); +#134493 = ORIENTED_EDGE('',*,*,#134494,.T.); +#134494 = EDGE_CURVE('',#134487,#134495,#134497,.T.); +#134495 = VERTEX_POINT('',#134496); +#134496 = CARTESIAN_POINT('',(182.56102,-127.809431,1.585)); +#134497 = LINE('',#134498,#134499); +#134498 = CARTESIAN_POINT('',(182.595278,-127.877947,1.585)); +#134499 = VECTOR('',#134500,1.); +#134500 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#134501 = ORIENTED_EDGE('',*,*,#134502,.T.); +#134502 = EDGE_CURVE('',#134495,#134452,#134503,.T.); +#134503 = LINE('',#134504,#134505); +#134504 = CARTESIAN_POINT('',(182.56102,-127.809431,1.585)); +#134505 = VECTOR('',#134506,1.); +#134506 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#134507 = PLANE('',#134508); +#134508 = AXIS2_PLACEMENT_3D('',#134509,#134510,#134511); +#134509 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134510 = DIRECTION('',(0.,0.,1.)); +#134511 = DIRECTION('',(1.,0.,-0.)); +#134512 = SHELL_BASED_SURFACE_MODEL('',(#134513)); +#134513 = OPEN_SHELL('',(#134514)); +#134514 = ADVANCED_FACE('',(#134515),#134601,.T.); +#134515 = FACE_BOUND('',#134516,.F.); +#134516 = EDGE_LOOP('',(#134517,#134528,#134536,#134545,#134553,#134562, + #134570,#134579,#134587,#134595)); +#134517 = ORIENTED_EDGE('',*,*,#134518,.T.); +#134518 = EDGE_CURVE('',#134519,#134521,#134523,.T.); +#134519 = VERTEX_POINT('',#134520); +#134520 = CARTESIAN_POINT('',(163.774998,-127.017459,1.585)); +#134521 = VERTEX_POINT('',#134522); +#134522 = CARTESIAN_POINT('',(163.891666,-127.079819,1.585)); +#134523 = CIRCLE('',#134524,7.500000000002E-02); +#134524 = AXIS2_PLACEMENT_3D('',#134525,#134526,#134527); +#134525 = CARTESIAN_POINT('',(163.816666,-127.0798190655,1.585)); +#134526 = DIRECTION('',(0.,0.,-1.)); +#134527 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#134528 = ORIENTED_EDGE('',*,*,#134529,.T.); +#134529 = EDGE_CURVE('',#134521,#134530,#134532,.T.); +#134530 = VERTEX_POINT('',#134531); +#134531 = CARTESIAN_POINT('',(163.889466,-127.810566,1.585)); +#134532 = LINE('',#134533,#134534); +#134533 = CARTESIAN_POINT('',(163.891666,-127.079819,1.585)); +#134534 = VECTOR('',#134535,1.); +#134535 = DIRECTION('',(-3.010604258182E-03,-0.999995468121,0.)); +#134536 = ORIENTED_EDGE('',*,*,#134537,.T.); +#134537 = EDGE_CURVE('',#134530,#134538,#134540,.T.); +#134538 = VERTEX_POINT('',#134539); +#134539 = CARTESIAN_POINT('',(163.538357,-128.154089,1.585)); +#134540 = CIRCLE('',#134541,0.38184101318); +#134541 = AXIS2_PLACEMENT_3D('',#134542,#134543,#134544); +#134542 = CARTESIAN_POINT('',(163.50944350032,-127.7733442444,1.585)); +#134543 = DIRECTION('',(0.,0.,-1.)); +#134544 = DIRECTION('',(0.995237511316,-9.747972132573E-02,0.)); +#134545 = ORIENTED_EDGE('',*,*,#134546,.T.); +#134546 = EDGE_CURVE('',#134538,#134547,#134549,.T.); +#134547 = VERTEX_POINT('',#134548); +#134548 = CARTESIAN_POINT('',(163.421082,-128.153378,1.585)); +#134549 = LINE('',#134550,#134551); +#134550 = CARTESIAN_POINT('',(163.538357,-128.154089,1.585)); +#134551 = VECTOR('',#134552,1.); +#134552 = DIRECTION('',(-0.999981622503,6.062561787214E-03,0.)); +#134553 = ORIENTED_EDGE('',*,*,#134554,.T.); +#134554 = EDGE_CURVE('',#134547,#134555,#134557,.T.); +#134555 = VERTEX_POINT('',#134556); +#134556 = CARTESIAN_POINT('',(163.435714,-128.004819,1.585)); +#134557 = CIRCLE('',#134558,7.500006711464E-02); +#134558 = AXIS2_PLACEMENT_3D('',#134559,#134560,#134561); +#134559 = CARTESIAN_POINT('',(163.43571393288,-128.0798190671,1.585)); +#134560 = DIRECTION('',(0.,0.,-1.)); +#134561 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#134562 = ORIENTED_EDGE('',*,*,#134563,.T.); +#134563 = EDGE_CURVE('',#134555,#134564,#134566,.T.); +#134564 = VERTEX_POINT('',#134565); +#134565 = CARTESIAN_POINT('',(163.518782,-128.004819,1.585)); +#134566 = LINE('',#134567,#134568); +#134567 = CARTESIAN_POINT('',(163.435714,-128.004819,1.585)); +#134568 = VECTOR('',#134569,1.); +#134569 = DIRECTION('',(1.,0.,0.)); +#134570 = ORIENTED_EDGE('',*,*,#134571,.T.); +#134571 = EDGE_CURVE('',#134564,#134572,#134574,.T.); +#134572 = VERTEX_POINT('',#134573); +#134573 = CARTESIAN_POINT('',(163.741666,-127.781934,1.585)); +#134574 = CIRCLE('',#134575,0.239437351684); +#134575 = AXIS2_PLACEMENT_3D('',#134576,#134577,#134578); +#134576 = CARTESIAN_POINT('',(163.50276490658,-127.7659179784,1.585)); +#134577 = DIRECTION('',(0.,0.,1.)); +#134578 = DIRECTION('',(6.689471506012E-02,-0.997760039838,0.)); +#134579 = ORIENTED_EDGE('',*,*,#134580,.T.); +#134580 = EDGE_CURVE('',#134572,#134581,#134583,.T.); +#134581 = VERTEX_POINT('',#134582); +#134582 = CARTESIAN_POINT('',(163.743107,-127.065187,1.585)); +#134583 = LINE('',#134584,#134585); +#134584 = CARTESIAN_POINT('',(163.741666,-127.781934,1.585)); +#134585 = VECTOR('',#134586,1.); +#134586 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#134587 = ORIENTED_EDGE('',*,*,#134588,.T.); +#134588 = EDGE_CURVE('',#134581,#134589,#134591,.T.); +#134589 = VERTEX_POINT('',#134590); +#134590 = CARTESIAN_POINT('',(163.754306,-127.038151,1.585)); +#134591 = LINE('',#134592,#134593); +#134592 = CARTESIAN_POINT('',(163.743107,-127.065187,1.585)); +#134593 = VECTOR('',#134594,1.); +#134594 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#134595 = ORIENTED_EDGE('',*,*,#134596,.T.); +#134596 = EDGE_CURVE('',#134589,#134519,#134597,.T.); +#134597 = LINE('',#134598,#134599); +#134598 = CARTESIAN_POINT('',(163.754306,-127.038151,1.585)); +#134599 = VECTOR('',#134600,1.); +#134600 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#134601 = PLANE('',#134602); +#134602 = AXIS2_PLACEMENT_3D('',#134603,#134604,#134605); +#134603 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134604 = DIRECTION('',(0.,0.,1.)); +#134605 = DIRECTION('',(1.,0.,-0.)); +#134606 = SHELL_BASED_SURFACE_MODEL('',(#134607)); +#134607 = OPEN_SHELL('',(#134608)); +#134608 = ADVANCED_FACE('',(#134609,#134767),#134837,.T.); +#134609 = FACE_BOUND('',#134610,.F.); +#134610 = EDGE_LOOP('',(#134611,#134622,#134630,#134638,#134646,#134655, + #134663,#134671,#134680,#134688,#134696,#134704,#134712,#134720, + #134728,#134736,#134745,#134753,#134761)); +#134611 = ORIENTED_EDGE('',*,*,#134612,.T.); +#134612 = EDGE_CURVE('',#134613,#134615,#134617,.T.); +#134613 = VERTEX_POINT('',#134614); +#134614 = CARTESIAN_POINT('',(164.300635,-127.06432,1.585)); +#134615 = VERTEX_POINT('',#134616); +#134616 = CARTESIAN_POINT('',(164.768711,-127.069686,1.585)); +#134617 = CIRCLE('',#134618,0.397581403297); +#134618 = AXIS2_PLACEMENT_3D('',#134619,#134620,#134621); +#134619 = CARTESIAN_POINT('',(164.53098887062,-127.3883694816,1.585)); +#134620 = DIRECTION('',(0.,0.,-1.)); +#134621 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#134622 = ORIENTED_EDGE('',*,*,#134623,.T.); +#134623 = EDGE_CURVE('',#134615,#134624,#134626,.T.); +#134624 = VERTEX_POINT('',#134625); +#134625 = CARTESIAN_POINT('',(164.832164,-127.135216,1.585)); +#134626 = LINE('',#134627,#134628); +#134627 = CARTESIAN_POINT('',(164.768711,-127.069686,1.585)); +#134628 = VECTOR('',#134629,1.); +#134629 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#134630 = ORIENTED_EDGE('',*,*,#134631,.T.); +#134631 = EDGE_CURVE('',#134624,#134632,#134634,.T.); +#134632 = VERTEX_POINT('',#134633); +#134633 = CARTESIAN_POINT('',(164.890225,-127.255663,1.585)); +#134634 = LINE('',#134635,#134636); +#134635 = CARTESIAN_POINT('',(164.832164,-127.135216,1.585)); +#134636 = VECTOR('',#134637,1.); +#134637 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#134638 = ORIENTED_EDGE('',*,*,#134639,.T.); +#134639 = EDGE_CURVE('',#134632,#134640,#134642,.T.); +#134640 = VERTEX_POINT('',#134641); +#134641 = CARTESIAN_POINT('',(164.889427,-127.669437,1.585)); +#134642 = LINE('',#134643,#134644); +#134643 = CARTESIAN_POINT('',(164.890225,-127.255663,1.585)); +#134644 = VECTOR('',#134645,1.); +#134645 = DIRECTION('',(-1.928585449825E-03,-0.999998140277,0.)); +#134646 = ORIENTED_EDGE('',*,*,#134647,.T.); +#134647 = EDGE_CURVE('',#134640,#134648,#134650,.T.); +#134648 = VERTEX_POINT('',#134649); +#134649 = CARTESIAN_POINT('',(164.659731,-128.099282,1.585)); +#134650 = CIRCLE('',#134651,0.610117599579); +#134651 = AXIS2_PLACEMENT_3D('',#134652,#134653,#134654); +#134652 = CARTESIAN_POINT('',(164.2812556885,-127.6207426349,1.585)); +#134653 = DIRECTION('',(0.,0.,-1.)); +#134654 = DIRECTION('',(0.996809978793,-7.981144140799E-02,0.)); +#134655 = ORIENTED_EDGE('',*,*,#134656,.T.); +#134656 = EDGE_CURVE('',#134648,#134657,#134659,.T.); +#134657 = VERTEX_POINT('',#134658); +#134658 = CARTESIAN_POINT('',(164.545584,-128.153378,1.585)); +#134659 = LINE('',#134660,#134661); +#134660 = CARTESIAN_POINT('',(164.659731,-128.099282,1.585)); +#134661 = VECTOR('',#134662,1.); +#134662 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#134663 = ORIENTED_EDGE('',*,*,#134664,.T.); +#134664 = EDGE_CURVE('',#134657,#134665,#134667,.T.); +#134665 = VERTEX_POINT('',#134666); +#134666 = CARTESIAN_POINT('',(164.325844,-128.153378,1.585)); +#134667 = LINE('',#134668,#134669); +#134668 = CARTESIAN_POINT('',(164.545584,-128.153378,1.585)); +#134669 = VECTOR('',#134670,1.); +#134670 = DIRECTION('',(-1.,0.,0.)); +#134671 = ORIENTED_EDGE('',*,*,#134672,.T.); +#134672 = EDGE_CURVE('',#134665,#134673,#134675,.T.); +#134673 = VERTEX_POINT('',#134674); +#134674 = CARTESIAN_POINT('',(164.340476,-128.004819,1.585)); +#134675 = CIRCLE('',#134676,7.500006711465E-02); +#134676 = AXIS2_PLACEMENT_3D('',#134677,#134678,#134679); +#134677 = CARTESIAN_POINT('',(164.34047593288,-128.0798190671,1.585)); +#134678 = DIRECTION('',(0.,0.,-1.)); +#134679 = DIRECTION('',(-0.195092263892,-0.980784894138,-0.)); +#134680 = ORIENTED_EDGE('',*,*,#134681,.T.); +#134681 = EDGE_CURVE('',#134673,#134682,#134684,.T.); +#134682 = VERTEX_POINT('',#134683); +#134683 = CARTESIAN_POINT('',(164.513247,-128.004819,1.585)); +#134684 = LINE('',#134685,#134686); +#134685 = CARTESIAN_POINT('',(164.340476,-128.004819,1.585)); +#134686 = VECTOR('',#134687,1.); +#134687 = DIRECTION('',(1.,0.,0.)); +#134688 = ORIENTED_EDGE('',*,*,#134689,.T.); +#134689 = EDGE_CURVE('',#134682,#134690,#134692,.T.); +#134690 = VERTEX_POINT('',#134691); +#134691 = CARTESIAN_POINT('',(164.581762,-127.970561,1.585)); +#134692 = LINE('',#134693,#134694); +#134693 = CARTESIAN_POINT('',(164.513247,-128.004819,1.585)); +#134694 = VECTOR('',#134695,1.); +#134695 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#134696 = ORIENTED_EDGE('',*,*,#134697,.T.); +#134697 = EDGE_CURVE('',#134690,#134698,#134700,.T.); +#134698 = VERTEX_POINT('',#134699); +#134699 = CARTESIAN_POINT('',(164.615522,-127.9368,1.585)); +#134700 = LINE('',#134701,#134702); +#134701 = CARTESIAN_POINT('',(164.581762,-127.970561,1.585)); +#134702 = VECTOR('',#134703,1.); +#134703 = DIRECTION('',(0.707096308711,0.707117253507,0.)); +#134704 = ORIENTED_EDGE('',*,*,#134705,.T.); +#134705 = EDGE_CURVE('',#134698,#134706,#134708,.T.); +#134706 = VERTEX_POINT('',#134707); +#134707 = CARTESIAN_POINT('',(164.699437,-127.810929,1.585)); +#134708 = LINE('',#134709,#134710); +#134709 = CARTESIAN_POINT('',(164.615522,-127.9368,1.585)); +#134710 = VECTOR('',#134711,1.); +#134711 = DIRECTION('',(0.55470477259,0.83204724341,0.)); +#134712 = ORIENTED_EDGE('',*,*,#134713,.T.); +#134713 = EDGE_CURVE('',#134706,#134714,#134716,.T.); +#134714 = VERTEX_POINT('',#134715); +#134715 = CARTESIAN_POINT('',(164.717961,-127.736833,1.585)); +#134716 = LINE('',#134717,#134718); +#134717 = CARTESIAN_POINT('',(164.699437,-127.810929,1.585)); +#134718 = VECTOR('',#134719,1.); +#134719 = DIRECTION('',(0.242535625037,0.970142500145,0.)); +#134720 = ORIENTED_EDGE('',*,*,#134721,.T.); +#134721 = EDGE_CURVE('',#134714,#134722,#134724,.T.); +#134722 = VERTEX_POINT('',#134723); +#134723 = CARTESIAN_POINT('',(164.640822,-127.772425,1.585)); +#134724 = LINE('',#134725,#134726); +#134725 = CARTESIAN_POINT('',(164.717961,-127.736833,1.585)); +#134726 = VECTOR('',#134727,1.); +#134727 = DIRECTION('',(-0.90800692221,-0.418955163734,0.)); +#134728 = ORIENTED_EDGE('',*,*,#134729,.T.); +#134729 = EDGE_CURVE('',#134722,#134730,#134732,.T.); +#134730 = VERTEX_POINT('',#134731); +#134731 = CARTESIAN_POINT('',(164.415904,-127.771203,1.585)); +#134732 = LINE('',#134733,#134734); +#134733 = CARTESIAN_POINT('',(164.640822,-127.772425,1.585)); +#134734 = VECTOR('',#134735,1.); +#134735 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#134736 = ORIENTED_EDGE('',*,*,#134737,.T.); +#134737 = EDGE_CURVE('',#134730,#134738,#134740,.T.); +#134738 = VERTEX_POINT('',#134739); +#134739 = CARTESIAN_POINT('',(164.171679,-127.523022,1.585)); +#134740 = CIRCLE('',#134741,0.348628078749); +#134741 = AXIS2_PLACEMENT_3D('',#134742,#134743,#134744); +#134742 = CARTESIAN_POINT('',(164.5090790302,-127.4352566485,1.585)); +#134743 = DIRECTION('',(0.,0.,-1.)); +#134744 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#134745 = ORIENTED_EDGE('',*,*,#134746,.T.); +#134746 = EDGE_CURVE('',#134738,#134747,#134749,.T.); +#134747 = VERTEX_POINT('',#134748); +#134748 = CARTESIAN_POINT('',(164.172901,-127.250486,1.585)); +#134749 = LINE('',#134750,#134751); +#134750 = CARTESIAN_POINT('',(164.171679,-127.523022,1.585)); +#134751 = VECTOR('',#134752,1.); +#134752 = DIRECTION('',(4.483766241087E-03,0.99998994787,0.)); +#134753 = ORIENTED_EDGE('',*,*,#134754,.T.); +#134754 = EDGE_CURVE('',#134747,#134755,#134757,.T.); +#134755 = VERTEX_POINT('',#134756); +#134756 = CARTESIAN_POINT('',(164.235105,-127.127773,1.585)); +#134757 = LINE('',#134758,#134759); +#134758 = CARTESIAN_POINT('',(164.172901,-127.250486,1.585)); +#134759 = VECTOR('',#134760,1.); +#134760 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#134761 = ORIENTED_EDGE('',*,*,#134762,.T.); +#134762 = EDGE_CURVE('',#134755,#134613,#134763,.T.); +#134763 = LINE('',#134764,#134765); +#134764 = CARTESIAN_POINT('',(164.235105,-127.127773,1.585)); +#134765 = VECTOR('',#134766,1.); +#134766 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#134767 = FACE_BOUND('',#134768,.F.); +#134768 = EDGE_LOOP('',(#134769,#134780,#134788,#134797,#134805,#134814, + #134822,#134831)); +#134769 = ORIENTED_EDGE('',*,*,#134770,.T.); +#134770 = EDGE_CURVE('',#134771,#134773,#134775,.T.); +#134771 = VERTEX_POINT('',#134772); +#134772 = CARTESIAN_POINT('',(164.677001,-127.189077,1.585)); +#134773 = VERTEX_POINT('',#134774); +#134774 = CARTESIAN_POINT('',(164.384903,-127.189077,1.585)); +#134775 = CIRCLE('',#134776,0.252889603602); +#134776 = AXIS2_PLACEMENT_3D('',#134777,#134778,#134779); +#134777 = CARTESIAN_POINT('',(164.530952,-127.39553,1.585)); +#134778 = DIRECTION('',(0.,0.,1.)); +#134779 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#134780 = ORIENTED_EDGE('',*,*,#134781,.T.); +#134781 = EDGE_CURVE('',#134773,#134782,#134784,.T.); +#134782 = VERTEX_POINT('',#134783); +#134783 = CARTESIAN_POINT('',(164.354496,-127.219484,1.585)); +#134784 = LINE('',#134785,#134786); +#134785 = CARTESIAN_POINT('',(164.384903,-127.189077,1.585)); +#134786 = VECTOR('',#134787,1.); +#134787 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#134788 = ORIENTED_EDGE('',*,*,#134789,.T.); +#134789 = EDGE_CURVE('',#134782,#134790,#134792,.T.); +#134790 = VERTEX_POINT('',#134791); +#134791 = CARTESIAN_POINT('',(164.354496,-127.559201,1.585)); +#134792 = CIRCLE('',#134793,0.305621483548); +#134793 = AXIS2_PLACEMENT_3D('',#134794,#134795,#134796); +#134794 = CARTESIAN_POINT('',(164.608568,-127.3893425,1.585)); +#134795 = DIRECTION('',(0.,0.,1.)); +#134796 = DIRECTION('',(-0.831328992485,0.555780627815,0.)); +#134797 = ORIENTED_EDGE('',*,*,#134798,.T.); +#134798 = EDGE_CURVE('',#134790,#134799,#134801,.T.); +#134799 = VERTEX_POINT('',#134800); +#134800 = CARTESIAN_POINT('',(164.384903,-127.589608,1.585)); +#134801 = LINE('',#134802,#134803); +#134802 = CARTESIAN_POINT('',(164.354496,-127.559201,1.585)); +#134803 = VECTOR('',#134804,1.); +#134804 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#134805 = ORIENTED_EDGE('',*,*,#134806,.T.); +#134806 = EDGE_CURVE('',#134799,#134807,#134809,.T.); +#134807 = VERTEX_POINT('',#134808); +#134808 = CARTESIAN_POINT('',(164.677001,-127.589608,1.585)); +#134809 = CIRCLE('',#134810,0.252889603602); +#134810 = AXIS2_PLACEMENT_3D('',#134811,#134812,#134813); +#134811 = CARTESIAN_POINT('',(164.530952,-127.383155,1.585)); +#134812 = DIRECTION('',(0.,0.,1.)); +#134813 = DIRECTION('',(-0.577520775547,-0.816375988017,0.)); +#134814 = ORIENTED_EDGE('',*,*,#134815,.T.); +#134815 = EDGE_CURVE('',#134807,#134816,#134818,.T.); +#134816 = VERTEX_POINT('',#134817); +#134817 = CARTESIAN_POINT('',(164.707408,-127.559201,1.585)); +#134818 = LINE('',#134819,#134820); +#134819 = CARTESIAN_POINT('',(164.677001,-127.589608,1.585)); +#134820 = VECTOR('',#134821,1.); +#134821 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#134822 = ORIENTED_EDGE('',*,*,#134823,.T.); +#134823 = EDGE_CURVE('',#134816,#134824,#134826,.T.); +#134824 = VERTEX_POINT('',#134825); +#134825 = CARTESIAN_POINT('',(164.707408,-127.219484,1.585)); +#134826 = CIRCLE('',#134827,0.305621483548); +#134827 = AXIS2_PLACEMENT_3D('',#134828,#134829,#134830); +#134828 = CARTESIAN_POINT('',(164.453336,-127.3893425,1.585)); +#134829 = DIRECTION('',(0.,-0.,1.)); +#134830 = DIRECTION('',(0.831328992485,-0.555780627815,-0.)); +#134831 = ORIENTED_EDGE('',*,*,#134832,.T.); +#134832 = EDGE_CURVE('',#134824,#134771,#134833,.T.); +#134833 = LINE('',#134834,#134835); +#134834 = CARTESIAN_POINT('',(164.707408,-127.219484,1.585)); +#134835 = VECTOR('',#134836,1.); +#134836 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#134837 = PLANE('',#134838); +#134838 = AXIS2_PLACEMENT_3D('',#134839,#134840,#134841); +#134839 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134840 = DIRECTION('',(0.,0.,1.)); +#134841 = DIRECTION('',(1.,0.,-0.)); +#134842 = SHELL_BASED_SURFACE_MODEL('',(#134843)); +#134843 = OPEN_SHELL('',(#134844)); +#134844 = ADVANCED_FACE('',(#134845),#134979,.T.); +#134845 = FACE_BOUND('',#134846,.F.); +#134846 = EDGE_LOOP('',(#134847,#134858,#134866,#134875,#134883,#134891, + #134899,#134907,#134916,#134924,#134932,#134940,#134949,#134957, + #134965,#134973)); +#134847 = ORIENTED_EDGE('',*,*,#134848,.T.); +#134848 = EDGE_CURVE('',#134849,#134851,#134853,.T.); +#134849 = VERTEX_POINT('',#134850); +#134850 = CARTESIAN_POINT('',(183.104801,-126.655025,1.585)); +#134851 = VERTEX_POINT('',#134852); +#134852 = CARTESIAN_POINT('',(183.221469,-126.717385,1.585)); +#134853 = CIRCLE('',#134854,7.500000000003E-02); +#134854 = AXIS2_PLACEMENT_3D('',#134855,#134856,#134857); +#134855 = CARTESIAN_POINT('',(183.146469,-126.7173850655,1.585)); +#134856 = DIRECTION('',(0.,0.,-1.)); +#134857 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#134858 = ORIENTED_EDGE('',*,*,#134859,.T.); +#134859 = EDGE_CURVE('',#134851,#134860,#134862,.T.); +#134860 = VERTEX_POINT('',#134861); +#134861 = CARTESIAN_POINT('',(183.220028,-127.303445,1.585)); +#134862 = LINE('',#134863,#134864); +#134863 = CARTESIAN_POINT('',(183.221469,-126.717385,1.585)); +#134864 = VECTOR('',#134865,1.); +#134865 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#134866 = ORIENTED_EDGE('',*,*,#134867,.T.); +#134867 = EDGE_CURVE('',#134860,#134868,#134870,.T.); +#134868 = VERTEX_POINT('',#134869); +#134869 = CARTESIAN_POINT('',(183.071469,-127.288813,1.585)); +#134870 = CIRCLE('',#134871,7.500006711464E-02); +#134871 = AXIS2_PLACEMENT_3D('',#134872,#134873,#134874); +#134872 = CARTESIAN_POINT('',(183.14646906711,-127.2888130671,1.585)); +#134873 = DIRECTION('',(-0.,0.,-1.)); +#134874 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#134875 = ORIENTED_EDGE('',*,*,#134876,.T.); +#134876 = EDGE_CURVE('',#134868,#134877,#134879,.T.); +#134877 = VERTEX_POINT('',#134878); +#134878 = CARTESIAN_POINT('',(183.071469,-127.078099,1.585)); +#134879 = LINE('',#134880,#134881); +#134880 = CARTESIAN_POINT('',(183.071469,-127.288813,1.585)); +#134881 = VECTOR('',#134882,1.); +#134882 = DIRECTION('',(0.,1.,0.)); +#134883 = ORIENTED_EDGE('',*,*,#134884,.T.); +#134884 = EDGE_CURVE('',#134877,#134885,#134887,.T.); +#134885 = VERTEX_POINT('',#134886); +#134886 = CARTESIAN_POINT('',(182.375154,-127.078099,1.585)); +#134887 = LINE('',#134888,#134889); +#134888 = CARTESIAN_POINT('',(183.071469,-127.078099,1.585)); +#134889 = VECTOR('',#134890,1.); +#134890 = DIRECTION('',(-1.,0.,0.)); +#134891 = ORIENTED_EDGE('',*,*,#134892,.T.); +#134892 = EDGE_CURVE('',#134885,#134893,#134895,.T.); +#134893 = VERTEX_POINT('',#134894); +#134894 = CARTESIAN_POINT('',(182.447683,-127.153739,1.585)); +#134895 = LINE('',#134896,#134897); +#134896 = CARTESIAN_POINT('',(182.375154,-127.078099,1.585)); +#134897 = VECTOR('',#134898,1.); +#134898 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#134899 = ORIENTED_EDGE('',*,*,#134900,.T.); +#134900 = EDGE_CURVE('',#134893,#134901,#134903,.T.); +#134901 = VERTEX_POINT('',#134902); +#134902 = CARTESIAN_POINT('',(182.50452,-127.269003,1.585)); +#134903 = LINE('',#134904,#134905); +#134904 = CARTESIAN_POINT('',(182.447683,-127.153739,1.585)); +#134905 = VECTOR('',#134906,1.); +#134906 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#134907 = ORIENTED_EDGE('',*,*,#134908,.T.); +#134908 = EDGE_CURVE('',#134901,#134909,#134911,.T.); +#134909 = VERTEX_POINT('',#134910); +#134910 = CARTESIAN_POINT('',(182.365101,-127.322354,1.585)); +#134911 = CIRCLE('',#134912,7.500029440469E-02); +#134912 = AXIS2_PLACEMENT_3D('',#134913,#134914,#134915); +#134913 = CARTESIAN_POINT('',(182.43218305397,-127.2888123513,1.585)); +#134914 = DIRECTION('',(0.,0.,-1.)); +#134915 = DIRECTION('',(0.964488827732,0.264123647521,0.)); +#134916 = ORIENTED_EDGE('',*,*,#134917,.T.); +#134917 = EDGE_CURVE('',#134909,#134918,#134920,.T.); +#134918 = VERTEX_POINT('',#134919); +#134919 = CARTESIAN_POINT('',(182.322925,-127.238002,1.585)); +#134920 = LINE('',#134921,#134922); +#134921 = CARTESIAN_POINT('',(182.365101,-127.322354,1.585)); +#134922 = VECTOR('',#134923,1.); +#134923 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#134924 = ORIENTED_EDGE('',*,*,#134925,.T.); +#134925 = EDGE_CURVE('',#134918,#134926,#134928,.T.); +#134926 = VERTEX_POINT('',#134927); +#134927 = CARTESIAN_POINT('',(182.241544,-127.156621,1.585)); +#134928 = LINE('',#134929,#134930); +#134929 = CARTESIAN_POINT('',(182.322925,-127.238002,1.585)); +#134930 = VECTOR('',#134931,1.); +#134931 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#134932 = ORIENTED_EDGE('',*,*,#134933,.T.); +#134933 = EDGE_CURVE('',#134926,#134934,#134936,.T.); +#134934 = VERTEX_POINT('',#134935); +#134935 = CARTESIAN_POINT('',(182.093491,-127.056187,1.585)); +#134936 = LINE('',#134937,#134938); +#134937 = CARTESIAN_POINT('',(182.241544,-127.156621,1.585)); +#134938 = VECTOR('',#134939,1.); +#134939 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#134940 = ORIENTED_EDGE('',*,*,#134941,.T.); +#134941 = EDGE_CURVE('',#134934,#134942,#134944,.T.); +#134942 = VERTEX_POINT('',#134943); +#134943 = CARTESIAN_POINT('',(182.146469,-126.928099,1.585)); +#134944 = CIRCLE('',#134945,7.499993751707E-02); +#134945 = AXIS2_PLACEMENT_3D('',#134946,#134947,#134948); +#134946 = CARTESIAN_POINT('',(182.14646880902,-127.0030989375,1.585)); +#134947 = DIRECTION('',(0.,0.,-1.)); +#134948 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#134949 = ORIENTED_EDGE('',*,*,#134950,.T.); +#134950 = EDGE_CURVE('',#134942,#134951,#134953,.T.); +#134951 = VERTEX_POINT('',#134952); +#134952 = CARTESIAN_POINT('',(183.071469,-126.928099,1.585)); +#134953 = LINE('',#134954,#134955); +#134954 = CARTESIAN_POINT('',(182.146469,-126.928099,1.585)); +#134955 = VECTOR('',#134956,1.); +#134956 = DIRECTION('',(1.,0.,0.)); +#134957 = ORIENTED_EDGE('',*,*,#134958,.T.); +#134958 = EDGE_CURVE('',#134951,#134959,#134961,.T.); +#134959 = VERTEX_POINT('',#134960); +#134960 = CARTESIAN_POINT('',(183.07291,-126.702753,1.585)); +#134961 = LINE('',#134962,#134963); +#134962 = CARTESIAN_POINT('',(183.071469,-126.928099,1.585)); +#134963 = VECTOR('',#134964,1.); +#134964 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#134965 = ORIENTED_EDGE('',*,*,#134966,.T.); +#134966 = EDGE_CURVE('',#134959,#134967,#134969,.T.); +#134967 = VERTEX_POINT('',#134968); +#134968 = CARTESIAN_POINT('',(183.084109,-126.675717,1.585)); +#134969 = LINE('',#134970,#134971); +#134970 = CARTESIAN_POINT('',(183.07291,-126.702753,1.585)); +#134971 = VECTOR('',#134972,1.); +#134972 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#134973 = ORIENTED_EDGE('',*,*,#134974,.T.); +#134974 = EDGE_CURVE('',#134967,#134849,#134975,.T.); +#134975 = LINE('',#134976,#134977); +#134976 = CARTESIAN_POINT('',(183.084109,-126.675717,1.585)); +#134977 = VECTOR('',#134978,1.); +#134978 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#134979 = PLANE('',#134980); +#134980 = AXIS2_PLACEMENT_3D('',#134981,#134982,#134983); +#134981 = CARTESIAN_POINT('',(0.,0.,1.585)); +#134982 = DIRECTION('',(0.,0.,1.)); +#134983 = DIRECTION('',(1.,0.,-0.)); +#134984 = SHELL_BASED_SURFACE_MODEL('',(#134985)); +#134985 = OPEN_SHELL('',(#134986)); +#134986 = ADVANCED_FACE('',(#134987,#135098),#135157,.T.); +#134987 = FACE_BOUND('',#134988,.F.); +#134988 = EDGE_LOOP('',(#134989,#134999,#135008,#135016,#135024,#135032, + #135041,#135049,#135058,#135066,#135075,#135083,#135092)); +#134989 = ORIENTED_EDGE('',*,*,#134990,.T.); +#134990 = EDGE_CURVE('',#134991,#134993,#134995,.T.); +#134991 = VERTEX_POINT('',#134992); +#134992 = CARTESIAN_POINT('',(160.048518,-125.963169,1.585)); +#134993 = VERTEX_POINT('',#134994); +#134994 = CARTESIAN_POINT('',(160.419623,-125.705156,1.585)); +#134995 = LINE('',#134996,#134997); +#134996 = CARTESIAN_POINT('',(160.048518,-125.963169,1.585)); +#134997 = VECTOR('',#134998,1.); +#134998 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#134999 = ORIENTED_EDGE('',*,*,#135000,.T.); +#135000 = EDGE_CURVE('',#134993,#135001,#135003,.T.); +#135001 = VERTEX_POINT('',#135002); +#135002 = CARTESIAN_POINT('',(160.492829,-125.835251,1.585)); +#135003 = CIRCLE('',#135004,7.500005951702E-02); +#135004 = AXIS2_PLACEMENT_3D('',#135005,#135006,#135007); +#135005 = CARTESIAN_POINT('',(160.44981874739,-125.773808937,1.585)); +#135006 = DIRECTION('',(0.,0.,-1.)); +#135007 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#135008 = ORIENTED_EDGE('',*,*,#135009,.T.); +#135009 = EDGE_CURVE('',#135001,#135010,#135012,.T.); +#135010 = VERTEX_POINT('',#135011); +#135011 = CARTESIAN_POINT('',(160.048628,-126.146191,1.585)); +#135012 = LINE('',#135013,#135014); +#135013 = CARTESIAN_POINT('',(160.492829,-125.835251,1.585)); +#135014 = VECTOR('',#135015,1.); +#135015 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#135016 = ORIENTED_EDGE('',*,*,#135017,.T.); +#135017 = EDGE_CURVE('',#135010,#135018,#135020,.T.); +#135018 = VERTEX_POINT('',#135019); +#135019 = CARTESIAN_POINT('',(160.048628,-126.270237,1.585)); +#135020 = LINE('',#135021,#135022); +#135021 = CARTESIAN_POINT('',(160.048628,-126.146191,1.585)); +#135022 = VECTOR('',#135023,1.); +#135023 = DIRECTION('',(0.,-1.,0.)); +#135024 = ORIENTED_EDGE('',*,*,#135025,.T.); +#135025 = EDGE_CURVE('',#135018,#135026,#135028,.T.); +#135026 = VERTEX_POINT('',#135027); +#135027 = CARTESIAN_POINT('',(160.464451,-126.271678,1.585)); +#135028 = LINE('',#135029,#135030); +#135029 = CARTESIAN_POINT('',(160.048628,-126.270237,1.585)); +#135030 = VECTOR('',#135031,1.); +#135031 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#135032 = ORIENTED_EDGE('',*,*,#135033,.T.); +#135033 = EDGE_CURVE('',#135026,#135034,#135036,.T.); +#135034 = VERTEX_POINT('',#135035); +#135035 = CARTESIAN_POINT('',(160.449819,-126.420237,1.585)); +#135036 = CIRCLE('',#135037,7.500006711464E-02); +#135037 = AXIS2_PLACEMENT_3D('',#135038,#135039,#135040); +#135038 = CARTESIAN_POINT('',(160.44981906711,-126.3452369328,1.585)); +#135039 = DIRECTION('',(0.,0.,-1.)); +#135040 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#135041 = ORIENTED_EDGE('',*,*,#135042,.T.); +#135042 = EDGE_CURVE('',#135034,#135043,#135045,.T.); +#135043 = VERTEX_POINT('',#135044); +#135044 = CARTESIAN_POINT('',(159.435187,-126.418796,1.585)); +#135045 = LINE('',#135046,#135047); +#135046 = CARTESIAN_POINT('',(160.449819,-126.420237,1.585)); +#135047 = VECTOR('',#135048,1.); +#135048 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#135049 = ORIENTED_EDGE('',*,*,#135050,.T.); +#135050 = EDGE_CURVE('',#135043,#135051,#135053,.T.); +#135051 = VERTEX_POINT('',#135052); +#135052 = CARTESIAN_POINT('',(159.374819,-126.345237,1.585)); +#135053 = CIRCLE('',#135054,7.500074938986E-02); +#135054 = AXIS2_PLACEMENT_3D('',#135055,#135056,#135057); +#135055 = CARTESIAN_POINT('',(159.44981974938,-126.3452365338,1.585)); +#135056 = DIRECTION('',(0.,0.,-1.)); +#135057 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#135058 = ORIENTED_EDGE('',*,*,#135059,.T.); +#135059 = EDGE_CURVE('',#135051,#135060,#135062,.T.); +#135060 = VERTEX_POINT('',#135061); +#135061 = CARTESIAN_POINT('',(159.377482,-125.944476,1.585)); +#135062 = LINE('',#135063,#135064); +#135063 = CARTESIAN_POINT('',(159.374819,-126.345237,1.585)); +#135064 = VECTOR('',#135065,1.); +#135065 = DIRECTION('',(6.644711463175E-03,0.999977923661,0.)); +#135066 = ORIENTED_EDGE('',*,*,#135067,.T.); +#135067 = EDGE_CURVE('',#135060,#135068,#135070,.T.); +#135068 = VERTEX_POINT('',#135069); +#135069 = CARTESIAN_POINT('',(159.625663,-125.70025,1.585)); +#135070 = CIRCLE('',#135071,0.3486213829); +#135071 = AXIS2_PLACEMENT_3D('',#135072,#135073,#135074); +#135072 = CARTESIAN_POINT('',(159.71342322951,-126.0376444438,1.585)); +#135073 = DIRECTION('',(0.,0.,-1.)); +#135074 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#135075 = ORIENTED_EDGE('',*,*,#135076,.T.); +#135076 = EDGE_CURVE('',#135068,#135077,#135079,.T.); +#135077 = VERTEX_POINT('',#135078); +#135078 = CARTESIAN_POINT('',(159.797784,-125.70025,1.585)); +#135079 = LINE('',#135080,#135081); +#135080 = CARTESIAN_POINT('',(159.625663,-125.70025,1.585)); +#135081 = VECTOR('',#135082,1.); +#135082 = DIRECTION('',(1.,0.,0.)); +#135083 = ORIENTED_EDGE('',*,*,#135084,.T.); +#135084 = EDGE_CURVE('',#135077,#135085,#135087,.T.); +#135085 = VERTEX_POINT('',#135086); +#135086 = CARTESIAN_POINT('',(160.047187,-125.949653,1.585)); +#135087 = CIRCLE('',#135088,0.347870264855); +#135088 = AXIS2_PLACEMENT_3D('',#135089,#135090,#135091); +#135089 = CARTESIAN_POINT('',(159.71045626502,-126.0369807349,1.585)); +#135090 = DIRECTION('',(0.,0.,-1.)); +#135091 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#135092 = ORIENTED_EDGE('',*,*,#135093,.T.); +#135093 = EDGE_CURVE('',#135085,#134991,#135094,.T.); +#135094 = LINE('',#135095,#135096); +#135095 = CARTESIAN_POINT('',(160.047187,-125.949653,1.585)); +#135096 = VECTOR('',#135097,1.); +#135097 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#135098 = FACE_BOUND('',#135099,.F.); +#135099 = EDGE_LOOP('',(#135100,#135111,#135119,#135127,#135135,#135143, + #135151)); +#135100 = ORIENTED_EDGE('',*,*,#135101,.T.); +#135101 = EDGE_CURVE('',#135102,#135104,#135106,.T.); +#135102 = VERTEX_POINT('',#135103); +#135103 = CARTESIAN_POINT('',(159.833963,-125.883067,1.585)); +#135104 = VERTEX_POINT('',#135105); +#135105 = CARTESIAN_POINT('',(159.559077,-125.913474,1.585)); +#135106 = CIRCLE('',#135107,0.198386215365); +#135107 = AXIS2_PLACEMENT_3D('',#135108,#135109,#135110); +#135108 = CARTESIAN_POINT('',(159.71215995783,-126.0396591753,1.585)); +#135109 = DIRECTION('',(0.,0.,1.)); +#135110 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#135111 = ORIENTED_EDGE('',*,*,#135112,.T.); +#135112 = EDGE_CURVE('',#135104,#135113,#135115,.T.); +#135113 = VERTEX_POINT('',#135114); +#135114 = CARTESIAN_POINT('',(159.524819,-125.98199,1.585)); +#135115 = LINE('',#135116,#135117); +#135116 = CARTESIAN_POINT('',(159.559077,-125.913474,1.585)); +#135117 = VECTOR('',#135118,1.); +#135118 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135119 = ORIENTED_EDGE('',*,*,#135120,.T.); +#135120 = EDGE_CURVE('',#135113,#135121,#135123,.T.); +#135121 = VERTEX_POINT('',#135122); +#135122 = CARTESIAN_POINT('',(159.524819,-126.270237,1.585)); +#135123 = LINE('',#135124,#135125); +#135124 = CARTESIAN_POINT('',(159.524819,-125.98199,1.585)); +#135125 = VECTOR('',#135126,1.); +#135126 = DIRECTION('',(0.,-1.,0.)); +#135127 = ORIENTED_EDGE('',*,*,#135128,.T.); +#135128 = EDGE_CURVE('',#135121,#135129,#135131,.T.); +#135129 = VERTEX_POINT('',#135130); +#135130 = CARTESIAN_POINT('',(159.898628,-126.270237,1.585)); +#135131 = LINE('',#135132,#135133); +#135132 = CARTESIAN_POINT('',(159.524819,-126.270237,1.585)); +#135133 = VECTOR('',#135134,1.); +#135134 = DIRECTION('',(1.,0.,0.)); +#135135 = ORIENTED_EDGE('',*,*,#135136,.T.); +#135136 = EDGE_CURVE('',#135129,#135137,#135139,.T.); +#135137 = VERTEX_POINT('',#135138); +#135138 = CARTESIAN_POINT('',(159.898628,-125.98199,1.585)); +#135139 = LINE('',#135140,#135141); +#135140 = CARTESIAN_POINT('',(159.898628,-126.270237,1.585)); +#135141 = VECTOR('',#135142,1.); +#135142 = DIRECTION('',(0.,1.,0.)); +#135143 = ORIENTED_EDGE('',*,*,#135144,.T.); +#135144 = EDGE_CURVE('',#135137,#135145,#135147,.T.); +#135145 = VERTEX_POINT('',#135146); +#135146 = CARTESIAN_POINT('',(159.86437,-125.913474,1.585)); +#135147 = LINE('',#135148,#135149); +#135148 = CARTESIAN_POINT('',(159.898628,-125.98199,1.585)); +#135149 = VECTOR('',#135150,1.); +#135150 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#135151 = ORIENTED_EDGE('',*,*,#135152,.T.); +#135152 = EDGE_CURVE('',#135145,#135102,#135153,.T.); +#135153 = LINE('',#135154,#135155); +#135154 = CARTESIAN_POINT('',(159.86437,-125.913474,1.585)); +#135155 = VECTOR('',#135156,1.); +#135156 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#135157 = PLANE('',#135158); +#135158 = AXIS2_PLACEMENT_3D('',#135159,#135160,#135161); +#135159 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135160 = DIRECTION('',(0.,0.,1.)); +#135161 = DIRECTION('',(1.,0.,-0.)); +#135162 = SHELL_BASED_SURFACE_MODEL('',(#135163)); +#135163 = OPEN_SHELL('',(#135164)); +#135164 = ADVANCED_FACE('',(#135165,#135276),#135335,.T.); +#135165 = FACE_BOUND('',#135166,.F.); +#135166 = EDGE_LOOP('',(#135167,#135177,#135186,#135194,#135202,#135210, + #135219,#135227,#135236,#135244,#135253,#135261,#135270)); +#135167 = ORIENTED_EDGE('',*,*,#135168,.T.); +#135168 = EDGE_CURVE('',#135169,#135171,#135173,.T.); +#135169 = VERTEX_POINT('',#135170); +#135170 = CARTESIAN_POINT('',(164.023518,-125.963169,1.585)); +#135171 = VERTEX_POINT('',#135172); +#135172 = CARTESIAN_POINT('',(164.394623,-125.705156,1.585)); +#135173 = LINE('',#135174,#135175); +#135174 = CARTESIAN_POINT('',(164.023518,-125.963169,1.585)); +#135175 = VECTOR('',#135176,1.); +#135176 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#135177 = ORIENTED_EDGE('',*,*,#135178,.T.); +#135178 = EDGE_CURVE('',#135171,#135179,#135181,.T.); +#135179 = VERTEX_POINT('',#135180); +#135180 = CARTESIAN_POINT('',(164.467829,-125.835251,1.585)); +#135181 = CIRCLE('',#135182,7.500005951702E-02); +#135182 = AXIS2_PLACEMENT_3D('',#135183,#135184,#135185); +#135183 = CARTESIAN_POINT('',(164.42481874739,-125.773808937,1.585)); +#135184 = DIRECTION('',(0.,0.,-1.)); +#135185 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#135186 = ORIENTED_EDGE('',*,*,#135187,.T.); +#135187 = EDGE_CURVE('',#135179,#135188,#135190,.T.); +#135188 = VERTEX_POINT('',#135189); +#135189 = CARTESIAN_POINT('',(164.023628,-126.146191,1.585)); +#135190 = LINE('',#135191,#135192); +#135191 = CARTESIAN_POINT('',(164.467829,-125.835251,1.585)); +#135192 = VECTOR('',#135193,1.); +#135193 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#135194 = ORIENTED_EDGE('',*,*,#135195,.T.); +#135195 = EDGE_CURVE('',#135188,#135196,#135198,.T.); +#135196 = VERTEX_POINT('',#135197); +#135197 = CARTESIAN_POINT('',(164.023628,-126.270237,1.585)); +#135198 = LINE('',#135199,#135200); +#135199 = CARTESIAN_POINT('',(164.023628,-126.146191,1.585)); +#135200 = VECTOR('',#135201,1.); +#135201 = DIRECTION('',(0.,-1.,0.)); +#135202 = ORIENTED_EDGE('',*,*,#135203,.T.); +#135203 = EDGE_CURVE('',#135196,#135204,#135206,.T.); +#135204 = VERTEX_POINT('',#135205); +#135205 = CARTESIAN_POINT('',(164.439451,-126.271678,1.585)); +#135206 = LINE('',#135207,#135208); +#135207 = CARTESIAN_POINT('',(164.023628,-126.270237,1.585)); +#135208 = VECTOR('',#135209,1.); +#135209 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#135210 = ORIENTED_EDGE('',*,*,#135211,.T.); +#135211 = EDGE_CURVE('',#135204,#135212,#135214,.T.); +#135212 = VERTEX_POINT('',#135213); +#135213 = CARTESIAN_POINT('',(164.424819,-126.420237,1.585)); +#135214 = CIRCLE('',#135215,7.500006711464E-02); +#135215 = AXIS2_PLACEMENT_3D('',#135216,#135217,#135218); +#135216 = CARTESIAN_POINT('',(164.42481906711,-126.3452369328,1.585)); +#135217 = DIRECTION('',(0.,0.,-1.)); +#135218 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#135219 = ORIENTED_EDGE('',*,*,#135220,.T.); +#135220 = EDGE_CURVE('',#135212,#135221,#135223,.T.); +#135221 = VERTEX_POINT('',#135222); +#135222 = CARTESIAN_POINT('',(163.410187,-126.418796,1.585)); +#135223 = LINE('',#135224,#135225); +#135224 = CARTESIAN_POINT('',(164.424819,-126.420237,1.585)); +#135225 = VECTOR('',#135226,1.); +#135226 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#135227 = ORIENTED_EDGE('',*,*,#135228,.T.); +#135228 = EDGE_CURVE('',#135221,#135229,#135231,.T.); +#135229 = VERTEX_POINT('',#135230); +#135230 = CARTESIAN_POINT('',(163.349819,-126.345237,1.585)); +#135231 = CIRCLE('',#135232,7.500074938985E-02); +#135232 = AXIS2_PLACEMENT_3D('',#135233,#135234,#135235); +#135233 = CARTESIAN_POINT('',(163.42481974938,-126.3452365338,1.585)); +#135234 = DIRECTION('',(0.,0.,-1.)); +#135235 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#135236 = ORIENTED_EDGE('',*,*,#135237,.T.); +#135237 = EDGE_CURVE('',#135229,#135238,#135240,.T.); +#135238 = VERTEX_POINT('',#135239); +#135239 = CARTESIAN_POINT('',(163.352482,-125.944476,1.585)); +#135240 = LINE('',#135241,#135242); +#135241 = CARTESIAN_POINT('',(163.349819,-126.345237,1.585)); +#135242 = VECTOR('',#135243,1.); +#135243 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#135244 = ORIENTED_EDGE('',*,*,#135245,.T.); +#135245 = EDGE_CURVE('',#135238,#135246,#135248,.T.); +#135246 = VERTEX_POINT('',#135247); +#135247 = CARTESIAN_POINT('',(163.600663,-125.70025,1.585)); +#135248 = CIRCLE('',#135249,0.3486213829); +#135249 = AXIS2_PLACEMENT_3D('',#135250,#135251,#135252); +#135250 = CARTESIAN_POINT('',(163.68842322951,-126.0376444438,1.585)); +#135251 = DIRECTION('',(0.,0.,-1.)); +#135252 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#135253 = ORIENTED_EDGE('',*,*,#135254,.T.); +#135254 = EDGE_CURVE('',#135246,#135255,#135257,.T.); +#135255 = VERTEX_POINT('',#135256); +#135256 = CARTESIAN_POINT('',(163.772784,-125.70025,1.585)); +#135257 = LINE('',#135258,#135259); +#135258 = CARTESIAN_POINT('',(163.600663,-125.70025,1.585)); +#135259 = VECTOR('',#135260,1.); +#135260 = DIRECTION('',(1.,0.,0.)); +#135261 = ORIENTED_EDGE('',*,*,#135262,.T.); +#135262 = EDGE_CURVE('',#135255,#135263,#135265,.T.); +#135263 = VERTEX_POINT('',#135264); +#135264 = CARTESIAN_POINT('',(164.022187,-125.949653,1.585)); +#135265 = CIRCLE('',#135266,0.347870264855); +#135266 = AXIS2_PLACEMENT_3D('',#135267,#135268,#135269); +#135267 = CARTESIAN_POINT('',(163.68545626502,-126.0369807349,1.585)); +#135268 = DIRECTION('',(0.,0.,-1.)); +#135269 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#135270 = ORIENTED_EDGE('',*,*,#135271,.T.); +#135271 = EDGE_CURVE('',#135263,#135169,#135272,.T.); +#135272 = LINE('',#135273,#135274); +#135273 = CARTESIAN_POINT('',(164.022187,-125.949653,1.585)); +#135274 = VECTOR('',#135275,1.); +#135275 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#135276 = FACE_BOUND('',#135277,.F.); +#135277 = EDGE_LOOP('',(#135278,#135289,#135297,#135305,#135313,#135321, + #135329)); +#135278 = ORIENTED_EDGE('',*,*,#135279,.T.); +#135279 = EDGE_CURVE('',#135280,#135282,#135284,.T.); +#135280 = VERTEX_POINT('',#135281); +#135281 = CARTESIAN_POINT('',(163.808963,-125.883067,1.585)); +#135282 = VERTEX_POINT('',#135283); +#135283 = CARTESIAN_POINT('',(163.534077,-125.913474,1.585)); +#135284 = CIRCLE('',#135285,0.198386215365); +#135285 = AXIS2_PLACEMENT_3D('',#135286,#135287,#135288); +#135286 = CARTESIAN_POINT('',(163.68715995783,-126.0396591753,1.585)); +#135287 = DIRECTION('',(0.,0.,1.)); +#135288 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#135289 = ORIENTED_EDGE('',*,*,#135290,.T.); +#135290 = EDGE_CURVE('',#135282,#135291,#135293,.T.); +#135291 = VERTEX_POINT('',#135292); +#135292 = CARTESIAN_POINT('',(163.499819,-125.98199,1.585)); +#135293 = LINE('',#135294,#135295); +#135294 = CARTESIAN_POINT('',(163.534077,-125.913474,1.585)); +#135295 = VECTOR('',#135296,1.); +#135296 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135297 = ORIENTED_EDGE('',*,*,#135298,.T.); +#135298 = EDGE_CURVE('',#135291,#135299,#135301,.T.); +#135299 = VERTEX_POINT('',#135300); +#135300 = CARTESIAN_POINT('',(163.499819,-126.270237,1.585)); +#135301 = LINE('',#135302,#135303); +#135302 = CARTESIAN_POINT('',(163.499819,-125.98199,1.585)); +#135303 = VECTOR('',#135304,1.); +#135304 = DIRECTION('',(0.,-1.,0.)); +#135305 = ORIENTED_EDGE('',*,*,#135306,.T.); +#135306 = EDGE_CURVE('',#135299,#135307,#135309,.T.); +#135307 = VERTEX_POINT('',#135308); +#135308 = CARTESIAN_POINT('',(163.873628,-126.270237,1.585)); +#135309 = LINE('',#135310,#135311); +#135310 = CARTESIAN_POINT('',(163.499819,-126.270237,1.585)); +#135311 = VECTOR('',#135312,1.); +#135312 = DIRECTION('',(1.,0.,0.)); +#135313 = ORIENTED_EDGE('',*,*,#135314,.T.); +#135314 = EDGE_CURVE('',#135307,#135315,#135317,.T.); +#135315 = VERTEX_POINT('',#135316); +#135316 = CARTESIAN_POINT('',(163.873628,-125.98199,1.585)); +#135317 = LINE('',#135318,#135319); +#135318 = CARTESIAN_POINT('',(163.873628,-126.270237,1.585)); +#135319 = VECTOR('',#135320,1.); +#135320 = DIRECTION('',(0.,1.,0.)); +#135321 = ORIENTED_EDGE('',*,*,#135322,.T.); +#135322 = EDGE_CURVE('',#135315,#135323,#135325,.T.); +#135323 = VERTEX_POINT('',#135324); +#135324 = CARTESIAN_POINT('',(163.83937,-125.913474,1.585)); +#135325 = LINE('',#135326,#135327); +#135326 = CARTESIAN_POINT('',(163.873628,-125.98199,1.585)); +#135327 = VECTOR('',#135328,1.); +#135328 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#135329 = ORIENTED_EDGE('',*,*,#135330,.T.); +#135330 = EDGE_CURVE('',#135323,#135280,#135331,.T.); +#135331 = LINE('',#135332,#135333); +#135332 = CARTESIAN_POINT('',(163.83937,-125.913474,1.585)); +#135333 = VECTOR('',#135334,1.); +#135334 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#135335 = PLANE('',#135336); +#135336 = AXIS2_PLACEMENT_3D('',#135337,#135338,#135339); +#135337 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135338 = DIRECTION('',(0.,0.,1.)); +#135339 = DIRECTION('',(1.,0.,-0.)); +#135340 = SHELL_BASED_SURFACE_MODEL('',(#135341)); +#135341 = OPEN_SHELL('',(#135342)); +#135342 = ADVANCED_FACE('',(#135343),#135476,.T.); +#135343 = FACE_BOUND('',#135344,.F.); +#135344 = EDGE_LOOP('',(#135345,#135356,#135364,#135372,#135380,#135388, + #135397,#135405,#135414,#135422,#135430,#135438,#135446,#135454, + #135462,#135470)); +#135345 = ORIENTED_EDGE('',*,*,#135346,.T.); +#135346 = EDGE_CURVE('',#135347,#135349,#135351,.T.); +#135347 = VERTEX_POINT('',#135348); +#135348 = CARTESIAN_POINT('',(181.726217,-123.360139,1.585)); +#135349 = VERTEX_POINT('',#135350); +#135350 = CARTESIAN_POINT('',(181.84165,-123.3831,1.585)); +#135351 = CIRCLE('',#135352,6.000007318647E-02); +#135352 = AXIS2_PLACEMENT_3D('',#135353,#135354,#135355); +#135353 = CARTESIAN_POINT('',(181.78164992681,-123.3830998233,1.585)); +#135354 = DIRECTION('',(0.,0.,-1.)); +#135355 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135356 = ORIENTED_EDGE('',*,*,#135357,.T.); +#135357 = EDGE_CURVE('',#135349,#135358,#135360,.T.); +#135358 = VERTEX_POINT('',#135359); +#135359 = CARTESIAN_POINT('',(181.84165,-124.64381,1.585)); +#135360 = LINE('',#135361,#135362); +#135361 = CARTESIAN_POINT('',(181.84165,-123.3831,1.585)); +#135362 = VECTOR('',#135363,1.); +#135363 = DIRECTION('',(0.,-1.,0.)); +#135364 = ORIENTED_EDGE('',*,*,#135365,.T.); +#135365 = EDGE_CURVE('',#135358,#135366,#135368,.T.); +#135366 = VERTEX_POINT('',#135367); +#135367 = CARTESIAN_POINT('',(182.87094,-125.6731,1.585)); +#135368 = LINE('',#135369,#135370); +#135369 = CARTESIAN_POINT('',(181.84165,-124.64381,1.585)); +#135370 = VECTOR('',#135371,1.); +#135371 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#135372 = ORIENTED_EDGE('',*,*,#135373,.T.); +#135373 = EDGE_CURVE('',#135366,#135374,#135376,.T.); +#135374 = VERTEX_POINT('',#135375); +#135375 = CARTESIAN_POINT('',(188.54165,-125.6731,1.585)); +#135376 = LINE('',#135377,#135378); +#135377 = CARTESIAN_POINT('',(182.87094,-125.6731,1.585)); +#135378 = VECTOR('',#135379,1.); +#135379 = DIRECTION('',(1.,0.,0.)); +#135380 = ORIENTED_EDGE('',*,*,#135381,.T.); +#135381 = EDGE_CURVE('',#135374,#135382,#135384,.T.); +#135382 = VERTEX_POINT('',#135383); +#135383 = CARTESIAN_POINT('',(188.54165,-123.3831,1.585)); +#135384 = LINE('',#135385,#135386); +#135385 = CARTESIAN_POINT('',(188.54165,-125.6731,1.585)); +#135386 = VECTOR('',#135387,1.); +#135387 = DIRECTION('',(0.,1.,0.)); +#135388 = ORIENTED_EDGE('',*,*,#135389,.T.); +#135389 = EDGE_CURVE('',#135382,#135390,#135392,.T.); +#135390 = VERTEX_POINT('',#135391); +#135391 = CARTESIAN_POINT('',(188.66165,-123.3831,1.585)); +#135392 = CIRCLE('',#135393,6.000000000043E-02); +#135393 = AXIS2_PLACEMENT_3D('',#135394,#135395,#135396); +#135394 = CARTESIAN_POINT('',(188.60165,-123.3830997744,1.585)); +#135395 = DIRECTION('',(0.,0.,-1.)); +#135396 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#135397 = ORIENTED_EDGE('',*,*,#135398,.T.); +#135398 = EDGE_CURVE('',#135390,#135399,#135401,.T.); +#135399 = VERTEX_POINT('',#135400); +#135400 = CARTESIAN_POINT('',(188.66165,-125.7331,1.585)); +#135401 = LINE('',#135402,#135403); +#135402 = CARTESIAN_POINT('',(188.66165,-123.3831,1.585)); +#135403 = VECTOR('',#135404,1.); +#135404 = DIRECTION('',(0.,-1.,0.)); +#135405 = ORIENTED_EDGE('',*,*,#135406,.T.); +#135406 = EDGE_CURVE('',#135399,#135407,#135409,.T.); +#135407 = VERTEX_POINT('',#135408); +#135408 = CARTESIAN_POINT('',(188.60165,-125.7931,1.585)); +#135409 = CIRCLE('',#135410,5.999932016262E-02); +#135410 = AXIS2_PLACEMENT_3D('',#135411,#135412,#135413); +#135411 = CARTESIAN_POINT('',(188.60165067984,-125.7331006798,1.585)); +#135412 = DIRECTION('',(0.,0.,-1.)); +#135413 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#135414 = ORIENTED_EDGE('',*,*,#135415,.T.); +#135415 = EDGE_CURVE('',#135407,#135416,#135418,.T.); +#135416 = VERTEX_POINT('',#135417); +#135417 = CARTESIAN_POINT('',(182.846087,-125.7931,1.585)); +#135418 = LINE('',#135419,#135420); +#135419 = CARTESIAN_POINT('',(188.60165,-125.7931,1.585)); +#135420 = VECTOR('',#135421,1.); +#135421 = DIRECTION('',(-1.,0.,0.)); +#135422 = ORIENTED_EDGE('',*,*,#135423,.T.); +#135423 = EDGE_CURVE('',#135416,#135424,#135426,.T.); +#135424 = VERTEX_POINT('',#135425); +#135425 = CARTESIAN_POINT('',(182.823126,-125.788533,1.585)); +#135426 = LINE('',#135427,#135428); +#135427 = CARTESIAN_POINT('',(182.846087,-125.7931,1.585)); +#135428 = VECTOR('',#135429,1.); +#135429 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#135430 = ORIENTED_EDGE('',*,*,#135431,.T.); +#135431 = EDGE_CURVE('',#135424,#135432,#135434,.T.); +#135432 = VERTEX_POINT('',#135433); +#135433 = CARTESIAN_POINT('',(182.80366,-125.775526,1.585)); +#135434 = LINE('',#135435,#135436); +#135435 = CARTESIAN_POINT('',(182.823126,-125.788533,1.585)); +#135436 = VECTOR('',#135437,1.); +#135437 = DIRECTION('',(-0.831464982668,0.555577161695,0.)); +#135438 = ORIENTED_EDGE('',*,*,#135439,.T.); +#135439 = EDGE_CURVE('',#135432,#135440,#135442,.T.); +#135440 = VERTEX_POINT('',#135441); +#135441 = CARTESIAN_POINT('',(181.739224,-124.711089,1.585)); +#135442 = LINE('',#135443,#135444); +#135443 = CARTESIAN_POINT('',(182.80366,-125.775526,1.585)); +#135444 = VECTOR('',#135445,1.); +#135445 = DIRECTION('',(-0.707106449036,0.707107113337,0.)); +#135446 = ORIENTED_EDGE('',*,*,#135447,.T.); +#135447 = EDGE_CURVE('',#135440,#135448,#135450,.T.); +#135448 = VERTEX_POINT('',#135449); +#135449 = CARTESIAN_POINT('',(181.726217,-124.691624,1.585)); +#135450 = LINE('',#135451,#135452); +#135451 = CARTESIAN_POINT('',(181.739224,-124.711089,1.585)); +#135452 = VECTOR('',#135453,1.); +#135453 = DIRECTION('',(-0.555596893535,0.831451797697,0.)); +#135454 = ORIENTED_EDGE('',*,*,#135455,.T.); +#135455 = EDGE_CURVE('',#135448,#135456,#135458,.T.); +#135456 = VERTEX_POINT('',#135457); +#135457 = CARTESIAN_POINT('',(181.72165,-124.668663,1.585)); +#135458 = LINE('',#135459,#135460); +#135459 = CARTESIAN_POINT('',(181.726217,-124.691624,1.585)); +#135460 = VECTOR('',#135461,1.); +#135461 = DIRECTION('',(-0.195081000117,0.980787134598,0.)); +#135462 = ORIENTED_EDGE('',*,*,#135463,.T.); +#135463 = EDGE_CURVE('',#135456,#135464,#135466,.T.); +#135464 = VERTEX_POINT('',#135465); +#135465 = CARTESIAN_POINT('',(181.72165,-123.3831,1.585)); +#135466 = LINE('',#135467,#135468); +#135467 = CARTESIAN_POINT('',(181.72165,-124.668663,1.585)); +#135468 = VECTOR('',#135469,1.); +#135469 = DIRECTION('',(0.,1.,0.)); +#135470 = ORIENTED_EDGE('',*,*,#135471,.T.); +#135471 = EDGE_CURVE('',#135464,#135347,#135472,.T.); +#135472 = LINE('',#135473,#135474); +#135473 = CARTESIAN_POINT('',(181.72165,-123.3831,1.585)); +#135474 = VECTOR('',#135475,1.); +#135475 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#135476 = PLANE('',#135477); +#135477 = AXIS2_PLACEMENT_3D('',#135478,#135479,#135480); +#135478 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135479 = DIRECTION('',(0.,0.,1.)); +#135480 = DIRECTION('',(1.,0.,-0.)); +#135481 = SHELL_BASED_SURFACE_MODEL('',(#135482)); +#135482 = OPEN_SHELL('',(#135483)); +#135483 = ADVANCED_FACE('',(#135484),#135620,.T.); +#135484 = FACE_BOUND('',#135485,.F.); +#135485 = EDGE_LOOP('',(#135486,#135496,#135505,#135513,#135522,#135530, + #135538,#135547,#135555,#135563,#135572,#135580,#135589,#135597, + #135605,#135614)); +#135486 = ORIENTED_EDGE('',*,*,#135487,.T.); +#135487 = EDGE_CURVE('',#135488,#135490,#135492,.T.); +#135488 = VERTEX_POINT('',#135489); +#135489 = CARTESIAN_POINT('',(160.523378,-124.997272,1.585)); +#135490 = VERTEX_POINT('',#135491); +#135491 = CARTESIAN_POINT('',(160.522156,-125.22219,1.585)); +#135492 = LINE('',#135493,#135494); +#135493 = CARTESIAN_POINT('',(160.523378,-124.997272,1.585)); +#135494 = VECTOR('',#135495,1.); +#135495 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#135496 = ORIENTED_EDGE('',*,*,#135497,.T.); +#135497 = EDGE_CURVE('',#135490,#135498,#135500,.T.); +#135498 = VERTEX_POINT('',#135499); +#135499 = CARTESIAN_POINT('',(160.273974,-125.466415,1.585)); +#135500 = CIRCLE('',#135501,0.348632713765); +#135501 = AXIS2_PLACEMENT_3D('',#135502,#135503,#135504); +#135502 = CARTESIAN_POINT('',(160.18620597394,-125.1290108762,1.585)); +#135503 = DIRECTION('',(0.,0.,-1.)); +#135504 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#135505 = ORIENTED_EDGE('',*,*,#135506,.T.); +#135506 = EDGE_CURVE('',#135498,#135507,#135509,.T.); +#135507 = VERTEX_POINT('',#135508); +#135508 = CARTESIAN_POINT('',(159.953818,-125.465193,1.585)); +#135509 = LINE('',#135510,#135511); +#135510 = CARTESIAN_POINT('',(160.273974,-125.466415,1.585)); +#135511 = VECTOR('',#135512,1.); +#135512 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#135513 = ORIENTED_EDGE('',*,*,#135514,.T.); +#135514 = EDGE_CURVE('',#135507,#135515,#135517,.T.); +#135515 = VERTEX_POINT('',#135516); +#135516 = CARTESIAN_POINT('',(159.709593,-125.217012,1.585)); +#135517 = CIRCLE('',#135518,0.348628078749); +#135518 = AXIS2_PLACEMENT_3D('',#135519,#135520,#135521); +#135519 = CARTESIAN_POINT('',(160.0469930302,-125.1292466485,1.585)); +#135520 = DIRECTION('',(0.,0.,-1.)); +#135521 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#135522 = ORIENTED_EDGE('',*,*,#135523,.T.); +#135523 = EDGE_CURVE('',#135515,#135524,#135526,.T.); +#135524 = VERTEX_POINT('',#135525); +#135525 = CARTESIAN_POINT('',(159.710815,-124.992095,1.585)); +#135526 = LINE('',#135527,#135528); +#135527 = CARTESIAN_POINT('',(159.709593,-125.217012,1.585)); +#135528 = VECTOR('',#135529,1.); +#135529 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#135530 = ORIENTED_EDGE('',*,*,#135531,.T.); +#135531 = EDGE_CURVE('',#135524,#135532,#135534,.T.); +#135532 = VERTEX_POINT('',#135533); +#135533 = CARTESIAN_POINT('',(159.771521,-124.870682,1.585)); +#135534 = LINE('',#135535,#135536); +#135535 = CARTESIAN_POINT('',(159.710815,-124.992095,1.585)); +#135536 = VECTOR('',#135537,1.); +#135537 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#135538 = ORIENTED_EDGE('',*,*,#135539,.T.); +#135539 = EDGE_CURVE('',#135532,#135540,#135542,.T.); +#135540 = VERTEX_POINT('',#135541); +#135541 = CARTESIAN_POINT('',(159.897853,-124.950207,1.585)); +#135542 = CIRCLE('',#135543,7.500029440361E-02); +#135543 = AXIS2_PLACEMENT_3D('',#135544,#135545,#135546); +#135544 = CARTESIAN_POINT('',(159.83077064867,-124.916665946,1.585)); +#135545 = DIRECTION('',(0.,0.,-1.)); +#135546 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#135547 = ORIENTED_EDGE('',*,*,#135548,.T.); +#135548 = EDGE_CURVE('',#135540,#135549,#135551,.T.); +#135549 = VERTEX_POINT('',#135550); +#135550 = CARTESIAN_POINT('',(159.858152,-125.029609,1.585)); +#135551 = LINE('',#135552,#135553); +#135552 = CARTESIAN_POINT('',(159.897853,-124.950207,1.585)); +#135553 = VECTOR('',#135554,1.); +#135554 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135555 = ORIENTED_EDGE('',*,*,#135556,.T.); +#135556 = EDGE_CURVE('',#135549,#135557,#135559,.T.); +#135557 = VERTEX_POINT('',#135558); +#135558 = CARTESIAN_POINT('',(159.858152,-125.184675,1.585)); +#135559 = LINE('',#135560,#135561); +#135560 = CARTESIAN_POINT('',(159.858152,-125.029609,1.585)); +#135561 = VECTOR('',#135562,1.); +#135562 = DIRECTION('',(0.,-1.,0.)); +#135563 = ORIENTED_EDGE('',*,*,#135564,.T.); +#135564 = EDGE_CURVE('',#135557,#135565,#135567,.T.); +#135565 = VERTEX_POINT('',#135566); +#135566 = CARTESIAN_POINT('',(159.991333,-125.317856,1.585)); +#135567 = CIRCLE('',#135568,0.18686440374); +#135568 = AXIS2_PLACEMENT_3D('',#135569,#135570,#135571); +#135569 = CARTESIAN_POINT('',(160.038869,-125.137139,1.585)); +#135570 = DIRECTION('',(0.,0.,1.)); +#135571 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#135572 = ORIENTED_EDGE('',*,*,#135573,.T.); +#135573 = EDGE_CURVE('',#135565,#135574,#135576,.T.); +#135574 = VERTEX_POINT('',#135575); +#135575 = CARTESIAN_POINT('',(160.241637,-125.317856,1.585)); +#135576 = LINE('',#135577,#135578); +#135577 = CARTESIAN_POINT('',(159.991333,-125.317856,1.585)); +#135578 = VECTOR('',#135579,1.); +#135579 = DIRECTION('',(1.,0.,0.)); +#135580 = ORIENTED_EDGE('',*,*,#135581,.T.); +#135581 = EDGE_CURVE('',#135574,#135582,#135584,.T.); +#135582 = VERTEX_POINT('',#135583); +#135583 = CARTESIAN_POINT('',(160.374819,-125.184675,1.585)); +#135584 = CIRCLE('',#135585,0.186872595955); +#135585 = AXIS2_PLACEMENT_3D('',#135586,#135587,#135588); +#135586 = CARTESIAN_POINT('',(160.19409536766,-125.1371320106,1.585)); +#135587 = DIRECTION('',(0.,0.,1.)); +#135588 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#135589 = ORIENTED_EDGE('',*,*,#135590,.T.); +#135590 = EDGE_CURVE('',#135582,#135591,#135593,.T.); +#135591 = VERTEX_POINT('',#135592); +#135592 = CARTESIAN_POINT('',(160.374819,-125.029609,1.585)); +#135593 = LINE('',#135594,#135595); +#135594 = CARTESIAN_POINT('',(160.374819,-125.184675,1.585)); +#135595 = VECTOR('',#135596,1.); +#135596 = DIRECTION('',(0.,1.,0.)); +#135597 = ORIENTED_EDGE('',*,*,#135598,.T.); +#135598 = EDGE_CURVE('',#135591,#135599,#135601,.T.); +#135599 = VERTEX_POINT('',#135600); +#135600 = CARTESIAN_POINT('',(160.329863,-124.936475,1.585)); +#135601 = LINE('',#135602,#135603); +#135602 = CARTESIAN_POINT('',(160.374819,-125.029609,1.585)); +#135603 = VECTOR('',#135604,1.); +#135604 = DIRECTION('',(-0.43470796245,0.900571478219,0.)); +#135605 = ORIENTED_EDGE('',*,*,#135606,.T.); +#135606 = EDGE_CURVE('',#135599,#135607,#135609,.T.); +#135607 = VERTEX_POINT('',#135608); +#135608 = CARTESIAN_POINT('',(160.469282,-124.883125,1.585)); +#135609 = CIRCLE('',#135610,7.500016685596E-02); +#135610 = AXIS2_PLACEMENT_3D('',#135611,#135612,#135613); +#135611 = CARTESIAN_POINT('',(160.4022000864,-124.9166666442,1.585)); +#135612 = DIRECTION('',(0.,0.,-1.)); +#135613 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#135614 = ORIENTED_EDGE('',*,*,#135615,.T.); +#135615 = EDGE_CURVE('',#135607,#135488,#135616,.T.); +#135616 = LINE('',#135617,#135618); +#135617 = CARTESIAN_POINT('',(160.469282,-124.883125,1.585)); +#135618 = VECTOR('',#135619,1.); +#135619 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#135620 = PLANE('',#135621); +#135621 = AXIS2_PLACEMENT_3D('',#135622,#135623,#135624); +#135622 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135623 = DIRECTION('',(0.,0.,1.)); +#135624 = DIRECTION('',(1.,0.,-0.)); +#135625 = SHELL_BASED_SURFACE_MODEL('',(#135626)); +#135626 = OPEN_SHELL('',(#135627)); +#135627 = ADVANCED_FACE('',(#135628),#135764,.T.); +#135628 = FACE_BOUND('',#135629,.F.); +#135629 = EDGE_LOOP('',(#135630,#135640,#135649,#135657,#135666,#135674, + #135682,#135691,#135699,#135707,#135716,#135724,#135733,#135741, + #135749,#135758)); +#135630 = ORIENTED_EDGE('',*,*,#135631,.T.); +#135631 = EDGE_CURVE('',#135632,#135634,#135636,.T.); +#135632 = VERTEX_POINT('',#135633); +#135633 = CARTESIAN_POINT('',(164.498378,-124.997272,1.585)); +#135634 = VERTEX_POINT('',#135635); +#135635 = CARTESIAN_POINT('',(164.497156,-125.22219,1.585)); +#135636 = LINE('',#135637,#135638); +#135637 = CARTESIAN_POINT('',(164.498378,-124.997272,1.585)); +#135638 = VECTOR('',#135639,1.); +#135639 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#135640 = ORIENTED_EDGE('',*,*,#135641,.T.); +#135641 = EDGE_CURVE('',#135634,#135642,#135644,.T.); +#135642 = VERTEX_POINT('',#135643); +#135643 = CARTESIAN_POINT('',(164.248974,-125.466415,1.585)); +#135644 = CIRCLE('',#135645,0.348632713765); +#135645 = AXIS2_PLACEMENT_3D('',#135646,#135647,#135648); +#135646 = CARTESIAN_POINT('',(164.16120597394,-125.1290108762,1.585)); +#135647 = DIRECTION('',(0.,0.,-1.)); +#135648 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#135649 = ORIENTED_EDGE('',*,*,#135650,.T.); +#135650 = EDGE_CURVE('',#135642,#135651,#135653,.T.); +#135651 = VERTEX_POINT('',#135652); +#135652 = CARTESIAN_POINT('',(163.928818,-125.465193,1.585)); +#135653 = LINE('',#135654,#135655); +#135654 = CARTESIAN_POINT('',(164.248974,-125.466415,1.585)); +#135655 = VECTOR('',#135656,1.); +#135656 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#135657 = ORIENTED_EDGE('',*,*,#135658,.T.); +#135658 = EDGE_CURVE('',#135651,#135659,#135661,.T.); +#135659 = VERTEX_POINT('',#135660); +#135660 = CARTESIAN_POINT('',(163.684593,-125.217012,1.585)); +#135661 = CIRCLE('',#135662,0.348628078749); +#135662 = AXIS2_PLACEMENT_3D('',#135663,#135664,#135665); +#135663 = CARTESIAN_POINT('',(164.0219930302,-125.1292466485,1.585)); +#135664 = DIRECTION('',(0.,0.,-1.)); +#135665 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#135666 = ORIENTED_EDGE('',*,*,#135667,.T.); +#135667 = EDGE_CURVE('',#135659,#135668,#135670,.T.); +#135668 = VERTEX_POINT('',#135669); +#135669 = CARTESIAN_POINT('',(163.685815,-124.992095,1.585)); +#135670 = LINE('',#135671,#135672); +#135671 = CARTESIAN_POINT('',(163.684593,-125.217012,1.585)); +#135672 = VECTOR('',#135673,1.); +#135673 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#135674 = ORIENTED_EDGE('',*,*,#135675,.T.); +#135675 = EDGE_CURVE('',#135668,#135676,#135678,.T.); +#135676 = VERTEX_POINT('',#135677); +#135677 = CARTESIAN_POINT('',(163.746521,-124.870682,1.585)); +#135678 = LINE('',#135679,#135680); +#135679 = CARTESIAN_POINT('',(163.685815,-124.992095,1.585)); +#135680 = VECTOR('',#135681,1.); +#135681 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#135682 = ORIENTED_EDGE('',*,*,#135683,.T.); +#135683 = EDGE_CURVE('',#135676,#135684,#135686,.T.); +#135684 = VERTEX_POINT('',#135685); +#135685 = CARTESIAN_POINT('',(163.872853,-124.950207,1.585)); +#135686 = CIRCLE('',#135687,7.500029440362E-02); +#135687 = AXIS2_PLACEMENT_3D('',#135688,#135689,#135690); +#135688 = CARTESIAN_POINT('',(163.80577064867,-124.916665946,1.585)); +#135689 = DIRECTION('',(0.,0.,-1.)); +#135690 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#135691 = ORIENTED_EDGE('',*,*,#135692,.T.); +#135692 = EDGE_CURVE('',#135684,#135693,#135695,.T.); +#135693 = VERTEX_POINT('',#135694); +#135694 = CARTESIAN_POINT('',(163.833152,-125.029609,1.585)); +#135695 = LINE('',#135696,#135697); +#135696 = CARTESIAN_POINT('',(163.872853,-124.950207,1.585)); +#135697 = VECTOR('',#135698,1.); +#135698 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#135699 = ORIENTED_EDGE('',*,*,#135700,.T.); +#135700 = EDGE_CURVE('',#135693,#135701,#135703,.T.); +#135701 = VERTEX_POINT('',#135702); +#135702 = CARTESIAN_POINT('',(163.833152,-125.184675,1.585)); +#135703 = LINE('',#135704,#135705); +#135704 = CARTESIAN_POINT('',(163.833152,-125.029609,1.585)); +#135705 = VECTOR('',#135706,1.); +#135706 = DIRECTION('',(0.,-1.,0.)); +#135707 = ORIENTED_EDGE('',*,*,#135708,.T.); +#135708 = EDGE_CURVE('',#135701,#135709,#135711,.T.); +#135709 = VERTEX_POINT('',#135710); +#135710 = CARTESIAN_POINT('',(163.966333,-125.317856,1.585)); +#135711 = CIRCLE('',#135712,0.18686440374); +#135712 = AXIS2_PLACEMENT_3D('',#135713,#135714,#135715); +#135713 = CARTESIAN_POINT('',(164.013869,-125.137139,1.585)); +#135714 = DIRECTION('',(0.,0.,1.)); +#135715 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#135716 = ORIENTED_EDGE('',*,*,#135717,.T.); +#135717 = EDGE_CURVE('',#135709,#135718,#135720,.T.); +#135718 = VERTEX_POINT('',#135719); +#135719 = CARTESIAN_POINT('',(164.216637,-125.317856,1.585)); +#135720 = LINE('',#135721,#135722); +#135721 = CARTESIAN_POINT('',(163.966333,-125.317856,1.585)); +#135722 = VECTOR('',#135723,1.); +#135723 = DIRECTION('',(1.,0.,0.)); +#135724 = ORIENTED_EDGE('',*,*,#135725,.T.); +#135725 = EDGE_CURVE('',#135718,#135726,#135728,.T.); +#135726 = VERTEX_POINT('',#135727); +#135727 = CARTESIAN_POINT('',(164.349819,-125.184675,1.585)); +#135728 = CIRCLE('',#135729,0.186872595955); +#135729 = AXIS2_PLACEMENT_3D('',#135730,#135731,#135732); +#135730 = CARTESIAN_POINT('',(164.16909536766,-125.1371320106,1.585)); +#135731 = DIRECTION('',(0.,0.,1.)); +#135732 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#135733 = ORIENTED_EDGE('',*,*,#135734,.T.); +#135734 = EDGE_CURVE('',#135726,#135735,#135737,.T.); +#135735 = VERTEX_POINT('',#135736); +#135736 = CARTESIAN_POINT('',(164.349819,-125.029609,1.585)); +#135737 = LINE('',#135738,#135739); +#135738 = CARTESIAN_POINT('',(164.349819,-125.184675,1.585)); +#135739 = VECTOR('',#135740,1.); +#135740 = DIRECTION('',(0.,1.,0.)); +#135741 = ORIENTED_EDGE('',*,*,#135742,.T.); +#135742 = EDGE_CURVE('',#135735,#135743,#135745,.T.); +#135743 = VERTEX_POINT('',#135744); +#135744 = CARTESIAN_POINT('',(164.304863,-124.936475,1.585)); +#135745 = LINE('',#135746,#135747); +#135746 = CARTESIAN_POINT('',(164.349819,-125.029609,1.585)); +#135747 = VECTOR('',#135748,1.); +#135748 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#135749 = ORIENTED_EDGE('',*,*,#135750,.T.); +#135750 = EDGE_CURVE('',#135743,#135751,#135753,.T.); +#135751 = VERTEX_POINT('',#135752); +#135752 = CARTESIAN_POINT('',(164.444282,-124.883125,1.585)); +#135753 = CIRCLE('',#135754,7.500016685594E-02); +#135754 = AXIS2_PLACEMENT_3D('',#135755,#135756,#135757); +#135755 = CARTESIAN_POINT('',(164.3772000864,-124.9166666442,1.585)); +#135756 = DIRECTION('',(0.,0.,-1.)); +#135757 = DIRECTION('',(-0.964492339665,-0.264110822816,-0.)); +#135758 = ORIENTED_EDGE('',*,*,#135759,.T.); +#135759 = EDGE_CURVE('',#135751,#135632,#135760,.T.); +#135760 = LINE('',#135761,#135762); +#135761 = CARTESIAN_POINT('',(164.444282,-124.883125,1.585)); +#135762 = VECTOR('',#135763,1.); +#135763 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#135764 = PLANE('',#135765); +#135765 = AXIS2_PLACEMENT_3D('',#135766,#135767,#135768); +#135766 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135767 = DIRECTION('',(0.,0.,1.)); +#135768 = DIRECTION('',(1.,0.,-0.)); +#135769 = SHELL_BASED_SURFACE_MODEL('',(#135770)); +#135770 = OPEN_SHELL('',(#135771)); +#135771 = ADVANCED_FACE('',(#135772),#135816,.T.); +#135772 = FACE_BOUND('',#135773,.F.); +#135773 = EDGE_LOOP('',(#135774,#135785,#135793,#135802,#135810)); +#135774 = ORIENTED_EDGE('',*,*,#135775,.T.); +#135775 = EDGE_CURVE('',#135776,#135778,#135780,.T.); +#135776 = VERTEX_POINT('',#135777); +#135777 = CARTESIAN_POINT('',(160.847067,-124.489781,1.585)); +#135778 = VERTEX_POINT('',#135779); +#135779 = CARTESIAN_POINT('',(160.9625,-124.512742,1.585)); +#135780 = CIRCLE('',#135781,6.000007318647E-02); +#135781 = AXIS2_PLACEMENT_3D('',#135782,#135783,#135784); +#135782 = CARTESIAN_POINT('',(160.90249992681,-124.5127418233,1.585)); +#135783 = DIRECTION('',(0.,0.,-1.)); +#135784 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135785 = ORIENTED_EDGE('',*,*,#135786,.T.); +#135786 = EDGE_CURVE('',#135778,#135787,#135789,.T.); +#135787 = VERTEX_POINT('',#135788); +#135788 = CARTESIAN_POINT('',(160.9625,-124.987258,1.585)); +#135789 = LINE('',#135790,#135791); +#135790 = CARTESIAN_POINT('',(160.9625,-124.512742,1.585)); +#135791 = VECTOR('',#135792,1.); +#135792 = DIRECTION('',(0.,-1.,0.)); +#135793 = ORIENTED_EDGE('',*,*,#135794,.T.); +#135794 = EDGE_CURVE('',#135787,#135795,#135797,.T.); +#135795 = VERTEX_POINT('',#135796); +#135796 = CARTESIAN_POINT('',(160.8425,-124.987258,1.585)); +#135797 = CIRCLE('',#135798,6.000000000043E-02); +#135798 = AXIS2_PLACEMENT_3D('',#135799,#135800,#135801); +#135799 = CARTESIAN_POINT('',(160.9025,-124.9872582255,1.585)); +#135800 = DIRECTION('',(0.,0.,-1.)); +#135801 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135802 = ORIENTED_EDGE('',*,*,#135803,.T.); +#135803 = EDGE_CURVE('',#135795,#135804,#135806,.T.); +#135804 = VERTEX_POINT('',#135805); +#135805 = CARTESIAN_POINT('',(160.8425,-124.512742,1.585)); +#135806 = LINE('',#135807,#135808); +#135807 = CARTESIAN_POINT('',(160.8425,-124.987258,1.585)); +#135808 = VECTOR('',#135809,1.); +#135809 = DIRECTION('',(0.,1.,0.)); +#135810 = ORIENTED_EDGE('',*,*,#135811,.T.); +#135811 = EDGE_CURVE('',#135804,#135776,#135812,.T.); +#135812 = LINE('',#135813,#135814); +#135813 = CARTESIAN_POINT('',(160.8425,-124.512742,1.585)); +#135814 = VECTOR('',#135815,1.); +#135815 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#135816 = PLANE('',#135817); +#135817 = AXIS2_PLACEMENT_3D('',#135818,#135819,#135820); +#135818 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135819 = DIRECTION('',(0.,0.,1.)); +#135820 = DIRECTION('',(1.,0.,-0.)); +#135821 = SHELL_BASED_SURFACE_MODEL('',(#135822)); +#135822 = OPEN_SHELL('',(#135823)); +#135823 = ADVANCED_FACE('',(#135824),#135868,.T.); +#135824 = FACE_BOUND('',#135825,.F.); +#135825 = EDGE_LOOP('',(#135826,#135837,#135845,#135854,#135862)); +#135826 = ORIENTED_EDGE('',*,*,#135827,.T.); +#135827 = EDGE_CURVE('',#135828,#135830,#135832,.T.); +#135828 = VERTEX_POINT('',#135829); +#135829 = CARTESIAN_POINT('',(161.892067,-124.489781,1.585)); +#135830 = VERTEX_POINT('',#135831); +#135831 = CARTESIAN_POINT('',(162.0075,-124.512742,1.585)); +#135832 = CIRCLE('',#135833,6.000007318647E-02); +#135833 = AXIS2_PLACEMENT_3D('',#135834,#135835,#135836); +#135834 = CARTESIAN_POINT('',(161.94749992681,-124.5127418233,1.585)); +#135835 = DIRECTION('',(0.,0.,-1.)); +#135836 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135837 = ORIENTED_EDGE('',*,*,#135838,.T.); +#135838 = EDGE_CURVE('',#135830,#135839,#135841,.T.); +#135839 = VERTEX_POINT('',#135840); +#135840 = CARTESIAN_POINT('',(162.0075,-124.987258,1.585)); +#135841 = LINE('',#135842,#135843); +#135842 = CARTESIAN_POINT('',(162.0075,-124.512742,1.585)); +#135843 = VECTOR('',#135844,1.); +#135844 = DIRECTION('',(0.,-1.,0.)); +#135845 = ORIENTED_EDGE('',*,*,#135846,.T.); +#135846 = EDGE_CURVE('',#135839,#135847,#135849,.T.); +#135847 = VERTEX_POINT('',#135848); +#135848 = CARTESIAN_POINT('',(161.8875,-124.987258,1.585)); +#135849 = CIRCLE('',#135850,6.000000000043E-02); +#135850 = AXIS2_PLACEMENT_3D('',#135851,#135852,#135853); +#135851 = CARTESIAN_POINT('',(161.9475,-124.9872582255,1.585)); +#135852 = DIRECTION('',(0.,0.,-1.)); +#135853 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135854 = ORIENTED_EDGE('',*,*,#135855,.T.); +#135855 = EDGE_CURVE('',#135847,#135856,#135858,.T.); +#135856 = VERTEX_POINT('',#135857); +#135857 = CARTESIAN_POINT('',(161.8875,-124.512742,1.585)); +#135858 = LINE('',#135859,#135860); +#135859 = CARTESIAN_POINT('',(161.8875,-124.987258,1.585)); +#135860 = VECTOR('',#135861,1.); +#135861 = DIRECTION('',(0.,1.,0.)); +#135862 = ORIENTED_EDGE('',*,*,#135863,.T.); +#135863 = EDGE_CURVE('',#135856,#135828,#135864,.T.); +#135864 = LINE('',#135865,#135866); +#135865 = CARTESIAN_POINT('',(161.8875,-124.512742,1.585)); +#135866 = VECTOR('',#135867,1.); +#135867 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#135868 = PLANE('',#135869); +#135869 = AXIS2_PLACEMENT_3D('',#135870,#135871,#135872); +#135870 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135871 = DIRECTION('',(0.,0.,1.)); +#135872 = DIRECTION('',(1.,0.,-0.)); +#135873 = SHELL_BASED_SURFACE_MODEL('',(#135874)); +#135874 = OPEN_SHELL('',(#135875)); +#135875 = ADVANCED_FACE('',(#135876),#135920,.T.); +#135876 = FACE_BOUND('',#135877,.F.); +#135877 = EDGE_LOOP('',(#135878,#135889,#135897,#135906,#135914)); +#135878 = ORIENTED_EDGE('',*,*,#135879,.T.); +#135879 = EDGE_CURVE('',#135880,#135882,#135884,.T.); +#135880 = VERTEX_POINT('',#135881); +#135881 = CARTESIAN_POINT('',(164.822067,-124.489781,1.585)); +#135882 = VERTEX_POINT('',#135883); +#135883 = CARTESIAN_POINT('',(164.9375,-124.512742,1.585)); +#135884 = CIRCLE('',#135885,6.000007318647E-02); +#135885 = AXIS2_PLACEMENT_3D('',#135886,#135887,#135888); +#135886 = CARTESIAN_POINT('',(164.87749992681,-124.5127418233,1.585)); +#135887 = DIRECTION('',(0.,0.,-1.)); +#135888 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135889 = ORIENTED_EDGE('',*,*,#135890,.T.); +#135890 = EDGE_CURVE('',#135882,#135891,#135893,.T.); +#135891 = VERTEX_POINT('',#135892); +#135892 = CARTESIAN_POINT('',(164.9375,-124.987258,1.585)); +#135893 = LINE('',#135894,#135895); +#135894 = CARTESIAN_POINT('',(164.9375,-124.512742,1.585)); +#135895 = VECTOR('',#135896,1.); +#135896 = DIRECTION('',(0.,-1.,0.)); +#135897 = ORIENTED_EDGE('',*,*,#135898,.T.); +#135898 = EDGE_CURVE('',#135891,#135899,#135901,.T.); +#135899 = VERTEX_POINT('',#135900); +#135900 = CARTESIAN_POINT('',(164.8175,-124.987258,1.585)); +#135901 = CIRCLE('',#135902,6.000000000043E-02); +#135902 = AXIS2_PLACEMENT_3D('',#135903,#135904,#135905); +#135903 = CARTESIAN_POINT('',(164.8775,-124.9872582255,1.585)); +#135904 = DIRECTION('',(0.,0.,-1.)); +#135905 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135906 = ORIENTED_EDGE('',*,*,#135907,.T.); +#135907 = EDGE_CURVE('',#135899,#135908,#135910,.T.); +#135908 = VERTEX_POINT('',#135909); +#135909 = CARTESIAN_POINT('',(164.8175,-124.512742,1.585)); +#135910 = LINE('',#135911,#135912); +#135911 = CARTESIAN_POINT('',(164.8175,-124.987258,1.585)); +#135912 = VECTOR('',#135913,1.); +#135913 = DIRECTION('',(0.,1.,0.)); +#135914 = ORIENTED_EDGE('',*,*,#135915,.T.); +#135915 = EDGE_CURVE('',#135908,#135880,#135916,.T.); +#135916 = LINE('',#135917,#135918); +#135917 = CARTESIAN_POINT('',(164.8175,-124.512742,1.585)); +#135918 = VECTOR('',#135919,1.); +#135919 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#135920 = PLANE('',#135921); +#135921 = AXIS2_PLACEMENT_3D('',#135922,#135923,#135924); +#135922 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135923 = DIRECTION('',(0.,0.,1.)); +#135924 = DIRECTION('',(1.,0.,-0.)); +#135925 = SHELL_BASED_SURFACE_MODEL('',(#135926)); +#135926 = OPEN_SHELL('',(#135927)); +#135927 = ADVANCED_FACE('',(#135928),#135972,.T.); +#135928 = FACE_BOUND('',#135929,.F.); +#135929 = EDGE_LOOP('',(#135930,#135941,#135949,#135958,#135966)); +#135930 = ORIENTED_EDGE('',*,*,#135931,.T.); +#135931 = EDGE_CURVE('',#135932,#135934,#135936,.T.); +#135932 = VERTEX_POINT('',#135933); +#135933 = CARTESIAN_POINT('',(165.867067,-124.489781,1.585)); +#135934 = VERTEX_POINT('',#135935); +#135935 = CARTESIAN_POINT('',(165.9825,-124.512742,1.585)); +#135936 = CIRCLE('',#135937,6.000007318647E-02); +#135937 = AXIS2_PLACEMENT_3D('',#135938,#135939,#135940); +#135938 = CARTESIAN_POINT('',(165.92249992681,-124.5127418233,1.585)); +#135939 = DIRECTION('',(0.,0.,-1.)); +#135940 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#135941 = ORIENTED_EDGE('',*,*,#135942,.T.); +#135942 = EDGE_CURVE('',#135934,#135943,#135945,.T.); +#135943 = VERTEX_POINT('',#135944); +#135944 = CARTESIAN_POINT('',(165.9825,-124.987258,1.585)); +#135945 = LINE('',#135946,#135947); +#135946 = CARTESIAN_POINT('',(165.9825,-124.512742,1.585)); +#135947 = VECTOR('',#135948,1.); +#135948 = DIRECTION('',(0.,-1.,0.)); +#135949 = ORIENTED_EDGE('',*,*,#135950,.T.); +#135950 = EDGE_CURVE('',#135943,#135951,#135953,.T.); +#135951 = VERTEX_POINT('',#135952); +#135952 = CARTESIAN_POINT('',(165.8625,-124.987258,1.585)); +#135953 = CIRCLE('',#135954,6.000000000042E-02); +#135954 = AXIS2_PLACEMENT_3D('',#135955,#135956,#135957); +#135955 = CARTESIAN_POINT('',(165.9225,-124.9872582255,1.585)); +#135956 = DIRECTION('',(0.,0.,-1.)); +#135957 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#135958 = ORIENTED_EDGE('',*,*,#135959,.T.); +#135959 = EDGE_CURVE('',#135951,#135960,#135962,.T.); +#135960 = VERTEX_POINT('',#135961); +#135961 = CARTESIAN_POINT('',(165.8625,-124.512742,1.585)); +#135962 = LINE('',#135963,#135964); +#135963 = CARTESIAN_POINT('',(165.8625,-124.987258,1.585)); +#135964 = VECTOR('',#135965,1.); +#135965 = DIRECTION('',(0.,1.,0.)); +#135966 = ORIENTED_EDGE('',*,*,#135967,.T.); +#135967 = EDGE_CURVE('',#135960,#135932,#135968,.T.); +#135968 = LINE('',#135969,#135970); +#135969 = CARTESIAN_POINT('',(165.8625,-124.512742,1.585)); +#135970 = VECTOR('',#135971,1.); +#135971 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#135972 = PLANE('',#135973); +#135973 = AXIS2_PLACEMENT_3D('',#135974,#135975,#135976); +#135974 = CARTESIAN_POINT('',(0.,0.,1.585)); +#135975 = DIRECTION('',(0.,0.,1.)); +#135976 = DIRECTION('',(1.,0.,-0.)); +#135977 = SHELL_BASED_SURFACE_MODEL('',(#135978)); +#135978 = OPEN_SHELL('',(#135979)); +#135979 = ADVANCED_FACE('',(#135980),#136116,.T.); +#135980 = FACE_BOUND('',#135981,.F.); +#135981 = EDGE_LOOP('',(#135982,#135992,#136001,#136009,#136018,#136026, + #136034,#136043,#136051,#136059,#136068,#136076,#136085,#136093, + #136101,#136110)); +#135982 = ORIENTED_EDGE('',*,*,#135983,.T.); +#135983 = EDGE_CURVE('',#135984,#135986,#135988,.T.); +#135984 = VERTEX_POINT('',#135985); +#135985 = CARTESIAN_POINT('',(160.523378,-124.140129,1.585)); +#135986 = VERTEX_POINT('',#135987); +#135987 = CARTESIAN_POINT('',(160.522156,-124.365047,1.585)); +#135988 = LINE('',#135989,#135990); +#135989 = CARTESIAN_POINT('',(160.523378,-124.140129,1.585)); +#135990 = VECTOR('',#135991,1.); +#135991 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#135992 = ORIENTED_EDGE('',*,*,#135993,.T.); +#135993 = EDGE_CURVE('',#135986,#135994,#135996,.T.); +#135994 = VERTEX_POINT('',#135995); +#135995 = CARTESIAN_POINT('',(160.273974,-124.609272,1.585)); +#135996 = CIRCLE('',#135997,0.348632713765); +#135997 = AXIS2_PLACEMENT_3D('',#135998,#135999,#136000); +#135998 = CARTESIAN_POINT('',(160.18620597394,-124.2718678762,1.585)); +#135999 = DIRECTION('',(0.,0.,-1.)); +#136000 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#136001 = ORIENTED_EDGE('',*,*,#136002,.T.); +#136002 = EDGE_CURVE('',#135994,#136003,#136005,.T.); +#136003 = VERTEX_POINT('',#136004); +#136004 = CARTESIAN_POINT('',(159.953818,-124.60805,1.585)); +#136005 = LINE('',#136006,#136007); +#136006 = CARTESIAN_POINT('',(160.273974,-124.609272,1.585)); +#136007 = VECTOR('',#136008,1.); +#136008 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#136009 = ORIENTED_EDGE('',*,*,#136010,.T.); +#136010 = EDGE_CURVE('',#136003,#136011,#136013,.T.); +#136011 = VERTEX_POINT('',#136012); +#136012 = CARTESIAN_POINT('',(159.709593,-124.359869,1.585)); +#136013 = CIRCLE('',#136014,0.348628078749); +#136014 = AXIS2_PLACEMENT_3D('',#136015,#136016,#136017); +#136015 = CARTESIAN_POINT('',(160.0469930302,-124.2721036485,1.585)); +#136016 = DIRECTION('',(0.,0.,-1.)); +#136017 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#136018 = ORIENTED_EDGE('',*,*,#136019,.T.); +#136019 = EDGE_CURVE('',#136011,#136020,#136022,.T.); +#136020 = VERTEX_POINT('',#136021); +#136021 = CARTESIAN_POINT('',(159.710815,-124.134952,1.585)); +#136022 = LINE('',#136023,#136024); +#136023 = CARTESIAN_POINT('',(159.709593,-124.359869,1.585)); +#136024 = VECTOR('',#136025,1.); +#136025 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#136026 = ORIENTED_EDGE('',*,*,#136027,.T.); +#136027 = EDGE_CURVE('',#136020,#136028,#136030,.T.); +#136028 = VERTEX_POINT('',#136029); +#136029 = CARTESIAN_POINT('',(159.771521,-124.013539,1.585)); +#136030 = LINE('',#136031,#136032); +#136031 = CARTESIAN_POINT('',(159.710815,-124.134952,1.585)); +#136032 = VECTOR('',#136033,1.); +#136033 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#136034 = ORIENTED_EDGE('',*,*,#136035,.T.); +#136035 = EDGE_CURVE('',#136028,#136036,#136038,.T.); +#136036 = VERTEX_POINT('',#136037); +#136037 = CARTESIAN_POINT('',(159.897853,-124.093064,1.585)); +#136038 = CIRCLE('',#136039,7.500029440361E-02); +#136039 = AXIS2_PLACEMENT_3D('',#136040,#136041,#136042); +#136040 = CARTESIAN_POINT('',(159.83077064867,-124.059522946,1.585)); +#136041 = DIRECTION('',(0.,0.,-1.)); +#136042 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#136043 = ORIENTED_EDGE('',*,*,#136044,.T.); +#136044 = EDGE_CURVE('',#136036,#136045,#136047,.T.); +#136045 = VERTEX_POINT('',#136046); +#136046 = CARTESIAN_POINT('',(159.858152,-124.172466,1.585)); +#136047 = LINE('',#136048,#136049); +#136048 = CARTESIAN_POINT('',(159.897853,-124.093064,1.585)); +#136049 = VECTOR('',#136050,1.); +#136050 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#136051 = ORIENTED_EDGE('',*,*,#136052,.T.); +#136052 = EDGE_CURVE('',#136045,#136053,#136055,.T.); +#136053 = VERTEX_POINT('',#136054); +#136054 = CARTESIAN_POINT('',(159.858152,-124.327532,1.585)); +#136055 = LINE('',#136056,#136057); +#136056 = CARTESIAN_POINT('',(159.858152,-124.172466,1.585)); +#136057 = VECTOR('',#136058,1.); +#136058 = DIRECTION('',(0.,-1.,0.)); +#136059 = ORIENTED_EDGE('',*,*,#136060,.T.); +#136060 = EDGE_CURVE('',#136053,#136061,#136063,.T.); +#136061 = VERTEX_POINT('',#136062); +#136062 = CARTESIAN_POINT('',(159.991333,-124.460713,1.585)); +#136063 = CIRCLE('',#136064,0.18686440374); +#136064 = AXIS2_PLACEMENT_3D('',#136065,#136066,#136067); +#136065 = CARTESIAN_POINT('',(160.038869,-124.279996,1.585)); +#136066 = DIRECTION('',(0.,0.,1.)); +#136067 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#136068 = ORIENTED_EDGE('',*,*,#136069,.T.); +#136069 = EDGE_CURVE('',#136061,#136070,#136072,.T.); +#136070 = VERTEX_POINT('',#136071); +#136071 = CARTESIAN_POINT('',(160.241637,-124.460713,1.585)); +#136072 = LINE('',#136073,#136074); +#136073 = CARTESIAN_POINT('',(159.991333,-124.460713,1.585)); +#136074 = VECTOR('',#136075,1.); +#136075 = DIRECTION('',(1.,0.,0.)); +#136076 = ORIENTED_EDGE('',*,*,#136077,.T.); +#136077 = EDGE_CURVE('',#136070,#136078,#136080,.T.); +#136078 = VERTEX_POINT('',#136079); +#136079 = CARTESIAN_POINT('',(160.374819,-124.327532,1.585)); +#136080 = CIRCLE('',#136081,0.186872595955); +#136081 = AXIS2_PLACEMENT_3D('',#136082,#136083,#136084); +#136082 = CARTESIAN_POINT('',(160.19409536766,-124.2799890106,1.585)); +#136083 = DIRECTION('',(0.,0.,1.)); +#136084 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#136085 = ORIENTED_EDGE('',*,*,#136086,.T.); +#136086 = EDGE_CURVE('',#136078,#136087,#136089,.T.); +#136087 = VERTEX_POINT('',#136088); +#136088 = CARTESIAN_POINT('',(160.374819,-124.172466,1.585)); +#136089 = LINE('',#136090,#136091); +#136090 = CARTESIAN_POINT('',(160.374819,-124.327532,1.585)); +#136091 = VECTOR('',#136092,1.); +#136092 = DIRECTION('',(0.,1.,0.)); +#136093 = ORIENTED_EDGE('',*,*,#136094,.T.); +#136094 = EDGE_CURVE('',#136087,#136095,#136097,.T.); +#136095 = VERTEX_POINT('',#136096); +#136096 = CARTESIAN_POINT('',(160.329863,-124.079332,1.585)); +#136097 = LINE('',#136098,#136099); +#136098 = CARTESIAN_POINT('',(160.374819,-124.172466,1.585)); +#136099 = VECTOR('',#136100,1.); +#136100 = DIRECTION('',(-0.43470796245,0.900571478219,0.)); +#136101 = ORIENTED_EDGE('',*,*,#136102,.T.); +#136102 = EDGE_CURVE('',#136095,#136103,#136105,.T.); +#136103 = VERTEX_POINT('',#136104); +#136104 = CARTESIAN_POINT('',(160.469282,-124.025982,1.585)); +#136105 = CIRCLE('',#136106,7.500016685596E-02); +#136106 = AXIS2_PLACEMENT_3D('',#136107,#136108,#136109); +#136107 = CARTESIAN_POINT('',(160.4022000864,-124.0595236442,1.585)); +#136108 = DIRECTION('',(0.,0.,-1.)); +#136109 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#136110 = ORIENTED_EDGE('',*,*,#136111,.T.); +#136111 = EDGE_CURVE('',#136103,#135984,#136112,.T.); +#136112 = LINE('',#136113,#136114); +#136113 = CARTESIAN_POINT('',(160.469282,-124.025982,1.585)); +#136114 = VECTOR('',#136115,1.); +#136115 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#136116 = PLANE('',#136117); +#136117 = AXIS2_PLACEMENT_3D('',#136118,#136119,#136120); +#136118 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136119 = DIRECTION('',(0.,0.,1.)); +#136120 = DIRECTION('',(1.,0.,-0.)); +#136121 = SHELL_BASED_SURFACE_MODEL('',(#136122)); +#136122 = OPEN_SHELL('',(#136123)); +#136123 = ADVANCED_FACE('',(#136124),#136260,.T.); +#136124 = FACE_BOUND('',#136125,.F.); +#136125 = EDGE_LOOP('',(#136126,#136136,#136145,#136153,#136162,#136170, + #136178,#136187,#136195,#136203,#136212,#136220,#136229,#136237, + #136245,#136254)); +#136126 = ORIENTED_EDGE('',*,*,#136127,.T.); +#136127 = EDGE_CURVE('',#136128,#136130,#136132,.T.); +#136128 = VERTEX_POINT('',#136129); +#136129 = CARTESIAN_POINT('',(164.498378,-124.140129,1.585)); +#136130 = VERTEX_POINT('',#136131); +#136131 = CARTESIAN_POINT('',(164.497156,-124.365047,1.585)); +#136132 = LINE('',#136133,#136134); +#136133 = CARTESIAN_POINT('',(164.498378,-124.140129,1.585)); +#136134 = VECTOR('',#136135,1.); +#136135 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#136136 = ORIENTED_EDGE('',*,*,#136137,.T.); +#136137 = EDGE_CURVE('',#136130,#136138,#136140,.T.); +#136138 = VERTEX_POINT('',#136139); +#136139 = CARTESIAN_POINT('',(164.248974,-124.609272,1.585)); +#136140 = CIRCLE('',#136141,0.348632713765); +#136141 = AXIS2_PLACEMENT_3D('',#136142,#136143,#136144); +#136142 = CARTESIAN_POINT('',(164.16120597394,-124.2718678762,1.585)); +#136143 = DIRECTION('',(0.,0.,-1.)); +#136144 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#136145 = ORIENTED_EDGE('',*,*,#136146,.T.); +#136146 = EDGE_CURVE('',#136138,#136147,#136149,.T.); +#136147 = VERTEX_POINT('',#136148); +#136148 = CARTESIAN_POINT('',(163.928818,-124.60805,1.585)); +#136149 = LINE('',#136150,#136151); +#136150 = CARTESIAN_POINT('',(164.248974,-124.609272,1.585)); +#136151 = VECTOR('',#136152,1.); +#136152 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#136153 = ORIENTED_EDGE('',*,*,#136154,.T.); +#136154 = EDGE_CURVE('',#136147,#136155,#136157,.T.); +#136155 = VERTEX_POINT('',#136156); +#136156 = CARTESIAN_POINT('',(163.684593,-124.359869,1.585)); +#136157 = CIRCLE('',#136158,0.348628078749); +#136158 = AXIS2_PLACEMENT_3D('',#136159,#136160,#136161); +#136159 = CARTESIAN_POINT('',(164.0219930302,-124.2721036485,1.585)); +#136160 = DIRECTION('',(0.,0.,-1.)); +#136161 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#136162 = ORIENTED_EDGE('',*,*,#136163,.T.); +#136163 = EDGE_CURVE('',#136155,#136164,#136166,.T.); +#136164 = VERTEX_POINT('',#136165); +#136165 = CARTESIAN_POINT('',(163.685815,-124.134952,1.585)); +#136166 = LINE('',#136167,#136168); +#136167 = CARTESIAN_POINT('',(163.684593,-124.359869,1.585)); +#136168 = VECTOR('',#136169,1.); +#136169 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#136170 = ORIENTED_EDGE('',*,*,#136171,.T.); +#136171 = EDGE_CURVE('',#136164,#136172,#136174,.T.); +#136172 = VERTEX_POINT('',#136173); +#136173 = CARTESIAN_POINT('',(163.746521,-124.013539,1.585)); +#136174 = LINE('',#136175,#136176); +#136175 = CARTESIAN_POINT('',(163.685815,-124.134952,1.585)); +#136176 = VECTOR('',#136177,1.); +#136177 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#136178 = ORIENTED_EDGE('',*,*,#136179,.T.); +#136179 = EDGE_CURVE('',#136172,#136180,#136182,.T.); +#136180 = VERTEX_POINT('',#136181); +#136181 = CARTESIAN_POINT('',(163.872853,-124.093064,1.585)); +#136182 = CIRCLE('',#136183,7.500029440362E-02); +#136183 = AXIS2_PLACEMENT_3D('',#136184,#136185,#136186); +#136184 = CARTESIAN_POINT('',(163.80577064867,-124.059522946,1.585)); +#136185 = DIRECTION('',(0.,0.,-1.)); +#136186 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#136187 = ORIENTED_EDGE('',*,*,#136188,.T.); +#136188 = EDGE_CURVE('',#136180,#136189,#136191,.T.); +#136189 = VERTEX_POINT('',#136190); +#136190 = CARTESIAN_POINT('',(163.833152,-124.172466,1.585)); +#136191 = LINE('',#136192,#136193); +#136192 = CARTESIAN_POINT('',(163.872853,-124.093064,1.585)); +#136193 = VECTOR('',#136194,1.); +#136194 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#136195 = ORIENTED_EDGE('',*,*,#136196,.T.); +#136196 = EDGE_CURVE('',#136189,#136197,#136199,.T.); +#136197 = VERTEX_POINT('',#136198); +#136198 = CARTESIAN_POINT('',(163.833152,-124.327532,1.585)); +#136199 = LINE('',#136200,#136201); +#136200 = CARTESIAN_POINT('',(163.833152,-124.172466,1.585)); +#136201 = VECTOR('',#136202,1.); +#136202 = DIRECTION('',(0.,-1.,0.)); +#136203 = ORIENTED_EDGE('',*,*,#136204,.T.); +#136204 = EDGE_CURVE('',#136197,#136205,#136207,.T.); +#136205 = VERTEX_POINT('',#136206); +#136206 = CARTESIAN_POINT('',(163.966333,-124.460713,1.585)); +#136207 = CIRCLE('',#136208,0.18686440374); +#136208 = AXIS2_PLACEMENT_3D('',#136209,#136210,#136211); +#136209 = CARTESIAN_POINT('',(164.013869,-124.279996,1.585)); +#136210 = DIRECTION('',(0.,0.,1.)); +#136211 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#136212 = ORIENTED_EDGE('',*,*,#136213,.T.); +#136213 = EDGE_CURVE('',#136205,#136214,#136216,.T.); +#136214 = VERTEX_POINT('',#136215); +#136215 = CARTESIAN_POINT('',(164.216637,-124.460713,1.585)); +#136216 = LINE('',#136217,#136218); +#136217 = CARTESIAN_POINT('',(163.966333,-124.460713,1.585)); +#136218 = VECTOR('',#136219,1.); +#136219 = DIRECTION('',(1.,0.,0.)); +#136220 = ORIENTED_EDGE('',*,*,#136221,.T.); +#136221 = EDGE_CURVE('',#136214,#136222,#136224,.T.); +#136222 = VERTEX_POINT('',#136223); +#136223 = CARTESIAN_POINT('',(164.349819,-124.327532,1.585)); +#136224 = CIRCLE('',#136225,0.186872595955); +#136225 = AXIS2_PLACEMENT_3D('',#136226,#136227,#136228); +#136226 = CARTESIAN_POINT('',(164.16909536766,-124.2799890106,1.585)); +#136227 = DIRECTION('',(0.,0.,1.)); +#136228 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#136229 = ORIENTED_EDGE('',*,*,#136230,.T.); +#136230 = EDGE_CURVE('',#136222,#136231,#136233,.T.); +#136231 = VERTEX_POINT('',#136232); +#136232 = CARTESIAN_POINT('',(164.349819,-124.172466,1.585)); +#136233 = LINE('',#136234,#136235); +#136234 = CARTESIAN_POINT('',(164.349819,-124.327532,1.585)); +#136235 = VECTOR('',#136236,1.); +#136236 = DIRECTION('',(0.,1.,0.)); +#136237 = ORIENTED_EDGE('',*,*,#136238,.T.); +#136238 = EDGE_CURVE('',#136231,#136239,#136241,.T.); +#136239 = VERTEX_POINT('',#136240); +#136240 = CARTESIAN_POINT('',(164.304863,-124.079332,1.585)); +#136241 = LINE('',#136242,#136243); +#136242 = CARTESIAN_POINT('',(164.349819,-124.172466,1.585)); +#136243 = VECTOR('',#136244,1.); +#136244 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#136245 = ORIENTED_EDGE('',*,*,#136246,.T.); +#136246 = EDGE_CURVE('',#136239,#136247,#136249,.T.); +#136247 = VERTEX_POINT('',#136248); +#136248 = CARTESIAN_POINT('',(164.444282,-124.025982,1.585)); +#136249 = CIRCLE('',#136250,7.500016685594E-02); +#136250 = AXIS2_PLACEMENT_3D('',#136251,#136252,#136253); +#136251 = CARTESIAN_POINT('',(164.3772000864,-124.0595236442,1.585)); +#136252 = DIRECTION('',(0.,0.,-1.)); +#136253 = DIRECTION('',(-0.964492339665,-0.264110822816,-0.)); +#136254 = ORIENTED_EDGE('',*,*,#136255,.T.); +#136255 = EDGE_CURVE('',#136247,#136128,#136256,.T.); +#136256 = LINE('',#136257,#136258); +#136257 = CARTESIAN_POINT('',(164.444282,-124.025982,1.585)); +#136258 = VECTOR('',#136259,1.); +#136259 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#136260 = PLANE('',#136261); +#136261 = AXIS2_PLACEMENT_3D('',#136262,#136263,#136264); +#136262 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136263 = DIRECTION('',(0.,0.,1.)); +#136264 = DIRECTION('',(1.,0.,-0.)); +#136265 = SHELL_BASED_SURFACE_MODEL('',(#136266)); +#136266 = OPEN_SHELL('',(#136267)); +#136267 = ADVANCED_FACE('',(#136268),#136337,.T.); +#136268 = FACE_BOUND('',#136269,.F.); +#136269 = EDGE_LOOP('',(#136270,#136281,#136289,#136297,#136306,#136314, + #136323,#136331)); +#136270 = ORIENTED_EDGE('',*,*,#136271,.T.); +#136271 = EDGE_CURVE('',#136272,#136274,#136276,.T.); +#136272 = VERTEX_POINT('',#136273); +#136273 = CARTESIAN_POINT('',(207.386217,-122.900139,1.585)); +#136274 = VERTEX_POINT('',#136275); +#136275 = CARTESIAN_POINT('',(207.50165,-122.9231,1.585)); +#136276 = CIRCLE('',#136277,6.000007318649E-02); +#136277 = AXIS2_PLACEMENT_3D('',#136278,#136279,#136280); +#136278 = CARTESIAN_POINT('',(207.44164992681,-122.9230998233,1.585)); +#136279 = DIRECTION('',(0.,0.,-1.)); +#136280 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#136281 = ORIENTED_EDGE('',*,*,#136282,.T.); +#136282 = EDGE_CURVE('',#136274,#136283,#136285,.T.); +#136283 = VERTEX_POINT('',#136284); +#136284 = CARTESIAN_POINT('',(207.50165,-124.1131,1.585)); +#136285 = LINE('',#136286,#136287); +#136286 = CARTESIAN_POINT('',(207.50165,-122.9231,1.585)); +#136287 = VECTOR('',#136288,1.); +#136288 = DIRECTION('',(0.,-1.,0.)); +#136289 = ORIENTED_EDGE('',*,*,#136290,.T.); +#136290 = EDGE_CURVE('',#136283,#136291,#136293,.T.); +#136291 = VERTEX_POINT('',#136292); +#136292 = CARTESIAN_POINT('',(208.69165,-124.1131,1.585)); +#136293 = LINE('',#136294,#136295); +#136294 = CARTESIAN_POINT('',(207.50165,-124.1131,1.585)); +#136295 = VECTOR('',#136296,1.); +#136296 = DIRECTION('',(1.,0.,0.)); +#136297 = ORIENTED_EDGE('',*,*,#136298,.T.); +#136298 = EDGE_CURVE('',#136291,#136299,#136301,.T.); +#136299 = VERTEX_POINT('',#136300); +#136300 = CARTESIAN_POINT('',(208.69165,-124.2331,1.585)); +#136301 = CIRCLE('',#136302,6.000000000042E-02); +#136302 = AXIS2_PLACEMENT_3D('',#136303,#136304,#136305); +#136303 = CARTESIAN_POINT('',(208.69165022558,-124.1731,1.585)); +#136304 = DIRECTION('',(0.,0.,-1.)); +#136305 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#136306 = ORIENTED_EDGE('',*,*,#136307,.T.); +#136307 = EDGE_CURVE('',#136299,#136308,#136310,.T.); +#136308 = VERTEX_POINT('',#136309); +#136309 = CARTESIAN_POINT('',(207.44165,-124.2331,1.585)); +#136310 = LINE('',#136311,#136312); +#136311 = CARTESIAN_POINT('',(208.69165,-124.2331,1.585)); +#136312 = VECTOR('',#136313,1.); +#136313 = DIRECTION('',(-1.,0.,0.)); +#136314 = ORIENTED_EDGE('',*,*,#136315,.T.); +#136315 = EDGE_CURVE('',#136308,#136316,#136318,.T.); +#136316 = VERTEX_POINT('',#136317); +#136317 = CARTESIAN_POINT('',(207.38165,-124.1731,1.585)); +#136318 = CIRCLE('',#136319,5.999932016257E-02); +#136319 = AXIS2_PLACEMENT_3D('',#136320,#136321,#136322); +#136320 = CARTESIAN_POINT('',(207.44164932015,-124.1731006798,1.585)); +#136321 = DIRECTION('',(0.,0.,-1.)); +#136322 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#136323 = ORIENTED_EDGE('',*,*,#136324,.T.); +#136324 = EDGE_CURVE('',#136316,#136325,#136327,.T.); +#136325 = VERTEX_POINT('',#136326); +#136326 = CARTESIAN_POINT('',(207.38165,-122.9231,1.585)); +#136327 = LINE('',#136328,#136329); +#136328 = CARTESIAN_POINT('',(207.38165,-124.1731,1.585)); +#136329 = VECTOR('',#136330,1.); +#136330 = DIRECTION('',(0.,1.,0.)); +#136331 = ORIENTED_EDGE('',*,*,#136332,.T.); +#136332 = EDGE_CURVE('',#136325,#136272,#136333,.T.); +#136333 = LINE('',#136334,#136335); +#136334 = CARTESIAN_POINT('',(207.38165,-122.9231,1.585)); +#136335 = VECTOR('',#136336,1.); +#136336 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#136337 = PLANE('',#136338); +#136338 = AXIS2_PLACEMENT_3D('',#136339,#136340,#136341); +#136339 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136340 = DIRECTION('',(0.,0.,1.)); +#136341 = DIRECTION('',(1.,0.,-0.)); +#136342 = SHELL_BASED_SURFACE_MODEL('',(#136343)); +#136343 = OPEN_SHELL('',(#136344)); +#136344 = ADVANCED_FACE('',(#136345),#136422,.T.); +#136345 = FACE_BOUND('',#136346,.F.); +#136346 = EDGE_LOOP('',(#136347,#136358,#136366,#136374,#136383,#136391, + #136400,#136408,#136416)); +#136347 = ORIENTED_EDGE('',*,*,#136348,.T.); +#136348 = EDGE_CURVE('',#136349,#136351,#136353,.T.); +#136349 = VERTEX_POINT('',#136350); +#136350 = CARTESIAN_POINT('',(167.007125,-122.915559,1.585)); +#136351 = VERTEX_POINT('',#136352); +#136352 = CARTESIAN_POINT('',(167.123793,-122.977919,1.585)); +#136353 = CIRCLE('',#136354,7.500000000004E-02); +#136354 = AXIS2_PLACEMENT_3D('',#136355,#136356,#136357); +#136355 = CARTESIAN_POINT('',(167.048793,-122.9779190655,1.585)); +#136356 = DIRECTION('',(0.,0.,-1.)); +#136357 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#136358 = ORIENTED_EDGE('',*,*,#136359,.T.); +#136359 = EDGE_CURVE('',#136351,#136360,#136362,.T.); +#136360 = VERTEX_POINT('',#136361); +#136361 = CARTESIAN_POINT('',(167.123793,-123.902919,1.585)); +#136362 = LINE('',#136363,#136364); +#136363 = CARTESIAN_POINT('',(167.123793,-122.977919,1.585)); +#136364 = VECTOR('',#136365,1.); +#136365 = DIRECTION('',(0.,-1.,0.)); +#136366 = ORIENTED_EDGE('',*,*,#136367,.T.); +#136367 = EDGE_CURVE('',#136360,#136368,#136370,.T.); +#136368 = VERTEX_POINT('',#136369); +#136369 = CARTESIAN_POINT('',(167.539615,-123.90436,1.585)); +#136370 = LINE('',#136371,#136372); +#136371 = CARTESIAN_POINT('',(167.123793,-123.902919,1.585)); +#136372 = VECTOR('',#136373,1.); +#136373 = DIRECTION('',(0.999993995468,-3.465404301528E-03,0.)); +#136374 = ORIENTED_EDGE('',*,*,#136375,.T.); +#136375 = EDGE_CURVE('',#136368,#136376,#136378,.T.); +#136376 = VERTEX_POINT('',#136377); +#136377 = CARTESIAN_POINT('',(167.524983,-124.052919,1.585)); +#136378 = CIRCLE('',#136379,7.500006711465E-02); +#136379 = AXIS2_PLACEMENT_3D('',#136380,#136381,#136382); +#136380 = CARTESIAN_POINT('',(167.52498306711,-123.9779189328,1.585)); +#136381 = DIRECTION('',(0.,0.,-1.)); +#136382 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#136383 = ORIENTED_EDGE('',*,*,#136384,.T.); +#136384 = EDGE_CURVE('',#136376,#136385,#136387,.T.); +#136385 = VERTEX_POINT('',#136386); +#136386 = CARTESIAN_POINT('',(167.034161,-124.051478,1.585)); +#136387 = LINE('',#136388,#136389); +#136388 = CARTESIAN_POINT('',(167.524983,-124.052919,1.585)); +#136389 = VECTOR('',#136390,1.); +#136390 = DIRECTION('',(-0.999995690299,2.935878566407E-03,0.)); +#136391 = ORIENTED_EDGE('',*,*,#136392,.T.); +#136392 = EDGE_CURVE('',#136385,#136393,#136395,.T.); +#136393 = VERTEX_POINT('',#136394); +#136394 = CARTESIAN_POINT('',(166.973793,-123.977919,1.585)); +#136395 = CIRCLE('',#136396,7.500074938989E-02); +#136396 = AXIS2_PLACEMENT_3D('',#136397,#136398,#136399); +#136397 = CARTESIAN_POINT('',(167.04879374938,-123.9779185338,1.585)); +#136398 = DIRECTION('',(0.,0.,-1.)); +#136399 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#136400 = ORIENTED_EDGE('',*,*,#136401,.T.); +#136401 = EDGE_CURVE('',#136393,#136402,#136404,.T.); +#136402 = VERTEX_POINT('',#136403); +#136403 = CARTESIAN_POINT('',(166.975234,-122.963287,1.585)); +#136404 = LINE('',#136405,#136406); +#136405 = CARTESIAN_POINT('',(166.973793,-123.977919,1.585)); +#136406 = VECTOR('',#136407,1.); +#136407 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#136408 = ORIENTED_EDGE('',*,*,#136409,.T.); +#136409 = EDGE_CURVE('',#136402,#136410,#136412,.T.); +#136410 = VERTEX_POINT('',#136411); +#136411 = CARTESIAN_POINT('',(166.986433,-122.936251,1.585)); +#136412 = LINE('',#136413,#136414); +#136413 = CARTESIAN_POINT('',(166.975234,-122.963287,1.585)); +#136414 = VECTOR('',#136415,1.); +#136415 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#136416 = ORIENTED_EDGE('',*,*,#136417,.T.); +#136417 = EDGE_CURVE('',#136410,#136349,#136418,.T.); +#136418 = LINE('',#136419,#136420); +#136419 = CARTESIAN_POINT('',(166.986433,-122.936251,1.585)); +#136420 = VECTOR('',#136421,1.); +#136421 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#136422 = PLANE('',#136423); +#136423 = AXIS2_PLACEMENT_3D('',#136424,#136425,#136426); +#136424 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136425 = DIRECTION('',(0.,0.,1.)); +#136426 = DIRECTION('',(1.,0.,-0.)); +#136427 = SHELL_BASED_SURFACE_MODEL('',(#136428)); +#136428 = OPEN_SHELL('',(#136429)); +#136429 = ADVANCED_FACE('',(#136430),#136491,.T.); +#136430 = FACE_BOUND('',#136431,.F.); +#136431 = EDGE_LOOP('',(#136432,#136443,#136451,#136460,#136468,#136477, + #136485)); +#136432 = ORIENTED_EDGE('',*,*,#136433,.T.); +#136433 = EDGE_CURVE('',#136434,#136436,#136438,.T.); +#136434 = VERTEX_POINT('',#136435); +#136435 = CARTESIAN_POINT('',(167.748447,-123.051478,1.585)); +#136436 = VERTEX_POINT('',#136437); +#136437 = CARTESIAN_POINT('',(167.763079,-122.902919,1.585)); +#136438 = CIRCLE('',#136439,7.500006711464E-02); +#136439 = AXIS2_PLACEMENT_3D('',#136440,#136441,#136442); +#136440 = CARTESIAN_POINT('',(167.76307893288,-122.9779190671,1.585)); +#136441 = DIRECTION('',(0.,0.,-1.)); +#136442 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#136443 = ORIENTED_EDGE('',*,*,#136444,.T.); +#136444 = EDGE_CURVE('',#136436,#136445,#136447,.T.); +#136445 = VERTEX_POINT('',#136446); +#136446 = CARTESIAN_POINT('',(168.444377,-122.90436,1.585)); +#136447 = LINE('',#136448,#136449); +#136448 = CARTESIAN_POINT('',(167.763079,-122.902919,1.585)); +#136449 = VECTOR('',#136450,1.); +#136450 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#136451 = ORIENTED_EDGE('',*,*,#136452,.T.); +#136452 = EDGE_CURVE('',#136445,#136453,#136455,.T.); +#136453 = VERTEX_POINT('',#136454); +#136454 = CARTESIAN_POINT('',(168.498681,-123.007463,1.585)); +#136455 = CIRCLE('',#136456,7.500015546837E-02); +#136456 = AXIS2_PLACEMENT_3D('',#136457,#136458,#136459); +#136457 = CARTESIAN_POINT('',(168.42974497422,-122.9779190044,1.585)); +#136458 = DIRECTION('',(0.,0.,-1.)); +#136459 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#136460 = ORIENTED_EDGE('',*,*,#136461,.T.); +#136461 = EDGE_CURVE('',#136453,#136462,#136464,.T.); +#136462 = VERTEX_POINT('',#136463); +#136463 = CARTESIAN_POINT('',(168.063022,-124.020344,1.585)); +#136464 = LINE('',#136465,#136466); +#136465 = CARTESIAN_POINT('',(168.498681,-123.007463,1.585)); +#136466 = VECTOR('',#136467,1.); +#136467 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#136468 = ORIENTED_EDGE('',*,*,#136469,.T.); +#136469 = EDGE_CURVE('',#136462,#136470,#136472,.T.); +#136470 = VERTEX_POINT('',#136471); +#136471 = CARTESIAN_POINT('',(167.932238,-123.948375,1.585)); +#136472 = CIRCLE('',#136473,7.50003017842E-02); +#136473 = AXIS2_PLACEMENT_3D('',#136474,#136475,#136476); +#136474 = CARTESIAN_POINT('',(168.00117434698,-123.9779186174,1.585)); +#136475 = DIRECTION('',(-0.,0.,-1.)); +#136476 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#136477 = ORIENTED_EDGE('',*,*,#136478,.T.); +#136478 = EDGE_CURVE('',#136470,#136479,#136481,.T.); +#136479 = VERTEX_POINT('',#136480); +#136480 = CARTESIAN_POINT('',(168.316004,-123.052919,1.585)); +#136481 = LINE('',#136482,#136483); +#136482 = CARTESIAN_POINT('',(167.932238,-123.948375,1.585)); +#136483 = VECTOR('',#136484,1.); +#136484 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#136485 = ORIENTED_EDGE('',*,*,#136486,.T.); +#136486 = EDGE_CURVE('',#136479,#136434,#136487,.T.); +#136487 = LINE('',#136488,#136489); +#136488 = CARTESIAN_POINT('',(168.316004,-123.052919,1.585)); +#136489 = VECTOR('',#136490,1.); +#136490 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#136491 = PLANE('',#136492); +#136492 = AXIS2_PLACEMENT_3D('',#136493,#136494,#136495); +#136493 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136494 = DIRECTION('',(0.,0.,1.)); +#136495 = DIRECTION('',(1.,0.,-0.)); +#136496 = SHELL_BASED_SURFACE_MODEL('',(#136497)); +#136497 = OPEN_SHELL('',(#136498)); +#136498 = ADVANCED_FACE('',(#136499,#136569,#136753,#136837,#136871, + #136905),#136939,.T.); +#136499 = FACE_BOUND('',#136500,.F.); +#136500 = EDGE_LOOP('',(#136501,#136512,#136520,#136529,#136537,#136546, + #136554,#136563)); +#136501 = ORIENTED_EDGE('',*,*,#136502,.T.); +#136502 = EDGE_CURVE('',#136503,#136505,#136507,.T.); +#136503 = VERTEX_POINT('',#136504); +#136504 = CARTESIAN_POINT('',(207.67165,-116.2631,1.585)); +#136505 = VERTEX_POINT('',#136506); +#136506 = CARTESIAN_POINT('',(207.73165,-116.2031,1.585)); +#136507 = CIRCLE('',#136508,5.999932016262E-02); +#136508 = AXIS2_PLACEMENT_3D('',#136509,#136510,#136511); +#136509 = CARTESIAN_POINT('',(207.73164932015,-116.2630993201,1.585)); +#136510 = DIRECTION('',(0.,0.,-1.)); +#136511 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#136512 = ORIENTED_EDGE('',*,*,#136513,.T.); +#136513 = EDGE_CURVE('',#136505,#136514,#136516,.T.); +#136514 = VERTEX_POINT('',#136515); +#136515 = CARTESIAN_POINT('',(213.70165,-116.2031,1.585)); +#136516 = LINE('',#136517,#136518); +#136517 = CARTESIAN_POINT('',(207.73165,-116.2031,1.585)); +#136518 = VECTOR('',#136519,1.); +#136519 = DIRECTION('',(1.,0.,0.)); +#136520 = ORIENTED_EDGE('',*,*,#136521,.T.); +#136521 = EDGE_CURVE('',#136514,#136522,#136524,.T.); +#136522 = VERTEX_POINT('',#136523); +#136523 = CARTESIAN_POINT('',(213.76165,-116.2631,1.585)); +#136524 = CIRCLE('',#136525,5.999932016257E-02); +#136525 = AXIS2_PLACEMENT_3D('',#136526,#136527,#136528); +#136526 = CARTESIAN_POINT('',(213.70165067984,-116.2630993201,1.585)); +#136527 = DIRECTION('',(0.,0.,-1.)); +#136528 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#136529 = ORIENTED_EDGE('',*,*,#136530,.T.); +#136530 = EDGE_CURVE('',#136522,#136531,#136533,.T.); +#136531 = VERTEX_POINT('',#136532); +#136532 = CARTESIAN_POINT('',(213.76165,-123.8831,1.585)); +#136533 = LINE('',#136534,#136535); +#136534 = CARTESIAN_POINT('',(213.76165,-116.2631,1.585)); +#136535 = VECTOR('',#136536,1.); +#136536 = DIRECTION('',(0.,-1.,0.)); +#136537 = ORIENTED_EDGE('',*,*,#136538,.T.); +#136538 = EDGE_CURVE('',#136531,#136539,#136541,.T.); +#136539 = VERTEX_POINT('',#136540); +#136540 = CARTESIAN_POINT('',(213.70165,-123.9431,1.585)); +#136541 = CIRCLE('',#136542,5.999932016265E-02); +#136542 = AXIS2_PLACEMENT_3D('',#136543,#136544,#136545); +#136543 = CARTESIAN_POINT('',(213.70165067984,-123.8831006798,1.585)); +#136544 = DIRECTION('',(0.,0.,-1.)); +#136545 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#136546 = ORIENTED_EDGE('',*,*,#136547,.T.); +#136547 = EDGE_CURVE('',#136539,#136548,#136550,.T.); +#136548 = VERTEX_POINT('',#136549); +#136549 = CARTESIAN_POINT('',(207.73165,-123.9431,1.585)); +#136550 = LINE('',#136551,#136552); +#136551 = CARTESIAN_POINT('',(213.70165,-123.9431,1.585)); +#136552 = VECTOR('',#136553,1.); +#136553 = DIRECTION('',(-1.,0.,0.)); +#136554 = ORIENTED_EDGE('',*,*,#136555,.T.); +#136555 = EDGE_CURVE('',#136548,#136556,#136558,.T.); +#136556 = VERTEX_POINT('',#136557); +#136557 = CARTESIAN_POINT('',(207.67165,-123.8831,1.585)); +#136558 = CIRCLE('',#136559,5.999932016256E-02); +#136559 = AXIS2_PLACEMENT_3D('',#136560,#136561,#136562); +#136560 = CARTESIAN_POINT('',(207.73164932015,-123.8831006798,1.585)); +#136561 = DIRECTION('',(0.,0.,-1.)); +#136562 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#136563 = ORIENTED_EDGE('',*,*,#136564,.T.); +#136564 = EDGE_CURVE('',#136556,#136503,#136565,.T.); +#136565 = LINE('',#136566,#136567); +#136566 = CARTESIAN_POINT('',(207.67165,-123.8831,1.585)); +#136567 = VECTOR('',#136568,1.); +#136568 = DIRECTION('',(0.,1.,0.)); +#136569 = FACE_BOUND('',#136570,.F.); +#136570 = EDGE_LOOP('',(#136571,#136582,#136590,#136598,#136606,#136615, + #136623,#136631,#136639,#136648,#136656,#136665,#136673,#136681, + #136689,#136698,#136706,#136714,#136722,#136731,#136739,#136747)); +#136571 = ORIENTED_EDGE('',*,*,#136572,.T.); +#136572 = EDGE_CURVE('',#136573,#136575,#136577,.T.); +#136573 = VERTEX_POINT('',#136574); +#136574 = CARTESIAN_POINT('',(209.99165,-117.0831,1.585)); +#136575 = VERTEX_POINT('',#136576); +#136576 = CARTESIAN_POINT('',(209.93165,-117.0231,1.585)); +#136577 = CIRCLE('',#136578,5.999932016264E-02); +#136578 = AXIS2_PLACEMENT_3D('',#136579,#136580,#136581); +#136579 = CARTESIAN_POINT('',(209.99164932015,-117.0231006798,1.585)); +#136580 = DIRECTION('',(0.,0.,-1.)); +#136581 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#136582 = ORIENTED_EDGE('',*,*,#136583,.T.); +#136583 = EDGE_CURVE('',#136575,#136584,#136586,.T.); +#136584 = VERTEX_POINT('',#136585); +#136585 = CARTESIAN_POINT('',(209.93165,-116.3231,1.585)); +#136586 = LINE('',#136587,#136588); +#136587 = CARTESIAN_POINT('',(209.93165,-117.0231,1.585)); +#136588 = VECTOR('',#136589,1.); +#136589 = DIRECTION('',(0.,1.,0.)); +#136590 = ORIENTED_EDGE('',*,*,#136591,.T.); +#136591 = EDGE_CURVE('',#136584,#136592,#136594,.T.); +#136592 = VERTEX_POINT('',#136593); +#136593 = CARTESIAN_POINT('',(208.55165,-116.3231,1.585)); +#136594 = LINE('',#136595,#136596); +#136595 = CARTESIAN_POINT('',(209.93165,-116.3231,1.585)); +#136596 = VECTOR('',#136597,1.); +#136597 = DIRECTION('',(-1.,0.,0.)); +#136598 = ORIENTED_EDGE('',*,*,#136599,.T.); +#136599 = EDGE_CURVE('',#136592,#136600,#136602,.T.); +#136600 = VERTEX_POINT('',#136601); +#136601 = CARTESIAN_POINT('',(208.55165,-118.0731,1.585)); +#136602 = LINE('',#136603,#136604); +#136603 = CARTESIAN_POINT('',(208.55165,-116.3231,1.585)); +#136604 = VECTOR('',#136605,1.); +#136605 = DIRECTION('',(0.,-1.,0.)); +#136606 = ORIENTED_EDGE('',*,*,#136607,.T.); +#136607 = EDGE_CURVE('',#136600,#136608,#136610,.T.); +#136608 = VERTEX_POINT('',#136609); +#136609 = CARTESIAN_POINT('',(208.49165,-118.1331,1.585)); +#136610 = CIRCLE('',#136611,5.999932016262E-02); +#136611 = AXIS2_PLACEMENT_3D('',#136612,#136613,#136614); +#136612 = CARTESIAN_POINT('',(208.49165067984,-118.0731006798,1.585)); +#136613 = DIRECTION('',(0.,0.,-1.)); +#136614 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#136615 = ORIENTED_EDGE('',*,*,#136616,.T.); +#136616 = EDGE_CURVE('',#136608,#136617,#136619,.T.); +#136617 = VERTEX_POINT('',#136618); +#136618 = CARTESIAN_POINT('',(207.79165,-118.1331,1.585)); +#136619 = LINE('',#136620,#136621); +#136620 = CARTESIAN_POINT('',(208.49165,-118.1331,1.585)); +#136621 = VECTOR('',#136622,1.); +#136622 = DIRECTION('',(-1.,0.,0.)); +#136623 = ORIENTED_EDGE('',*,*,#136624,.T.); +#136624 = EDGE_CURVE('',#136617,#136625,#136627,.T.); +#136625 = VERTEX_POINT('',#136626); +#136626 = CARTESIAN_POINT('',(207.79165,-119.5131,1.585)); +#136627 = LINE('',#136628,#136629); +#136628 = CARTESIAN_POINT('',(207.79165,-118.1331,1.585)); +#136629 = VECTOR('',#136630,1.); +#136630 = DIRECTION('',(0.,-1.,0.)); +#136631 = ORIENTED_EDGE('',*,*,#136632,.T.); +#136632 = EDGE_CURVE('',#136625,#136633,#136635,.T.); +#136633 = VERTEX_POINT('',#136634); +#136634 = CARTESIAN_POINT('',(208.49165,-119.5131,1.585)); +#136635 = LINE('',#136636,#136637); +#136636 = CARTESIAN_POINT('',(207.79165,-119.5131,1.585)); +#136637 = VECTOR('',#136638,1.); +#136638 = DIRECTION('',(1.,0.,0.)); +#136639 = ORIENTED_EDGE('',*,*,#136640,.T.); +#136640 = EDGE_CURVE('',#136633,#136641,#136643,.T.); +#136641 = VERTEX_POINT('',#136642); +#136642 = CARTESIAN_POINT('',(208.55165,-119.5731,1.585)); +#136643 = CIRCLE('',#136644,5.999932016262E-02); +#136644 = AXIS2_PLACEMENT_3D('',#136645,#136646,#136647); +#136645 = CARTESIAN_POINT('',(208.49165067984,-119.5730993201,1.585)); +#136646 = DIRECTION('',(0.,0.,-1.)); +#136647 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#136648 = ORIENTED_EDGE('',*,*,#136649,.T.); +#136649 = EDGE_CURVE('',#136641,#136650,#136652,.T.); +#136650 = VERTEX_POINT('',#136651); +#136651 = CARTESIAN_POINT('',(208.55165,-120.5731,1.585)); +#136652 = LINE('',#136653,#136654); +#136653 = CARTESIAN_POINT('',(208.55165,-119.5731,1.585)); +#136654 = VECTOR('',#136655,1.); +#136655 = DIRECTION('',(0.,-1.,0.)); +#136656 = ORIENTED_EDGE('',*,*,#136657,.T.); +#136657 = EDGE_CURVE('',#136650,#136658,#136660,.T.); +#136658 = VERTEX_POINT('',#136659); +#136659 = CARTESIAN_POINT('',(208.49165,-120.6331,1.585)); +#136660 = CIRCLE('',#136661,5.999932016262E-02); +#136661 = AXIS2_PLACEMENT_3D('',#136662,#136663,#136664); +#136662 = CARTESIAN_POINT('',(208.49165067984,-120.5731006798,1.585)); +#136663 = DIRECTION('',(0.,0.,-1.)); +#136664 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#136665 = ORIENTED_EDGE('',*,*,#136666,.T.); +#136666 = EDGE_CURVE('',#136658,#136667,#136669,.T.); +#136667 = VERTEX_POINT('',#136668); +#136668 = CARTESIAN_POINT('',(207.79165,-120.6331,1.585)); +#136669 = LINE('',#136670,#136671); +#136670 = CARTESIAN_POINT('',(208.49165,-120.6331,1.585)); +#136671 = VECTOR('',#136672,1.); +#136672 = DIRECTION('',(-1.,0.,0.)); +#136673 = ORIENTED_EDGE('',*,*,#136674,.T.); +#136674 = EDGE_CURVE('',#136667,#136675,#136677,.T.); +#136675 = VERTEX_POINT('',#136676); +#136676 = CARTESIAN_POINT('',(207.79165,-122.0131,1.585)); +#136677 = LINE('',#136678,#136679); +#136678 = CARTESIAN_POINT('',(207.79165,-120.6331,1.585)); +#136679 = VECTOR('',#136680,1.); +#136680 = DIRECTION('',(0.,-1.,0.)); +#136681 = ORIENTED_EDGE('',*,*,#136682,.T.); +#136682 = EDGE_CURVE('',#136675,#136683,#136685,.T.); +#136683 = VERTEX_POINT('',#136684); +#136684 = CARTESIAN_POINT('',(208.49165,-122.0131,1.585)); +#136685 = LINE('',#136686,#136687); +#136686 = CARTESIAN_POINT('',(207.79165,-122.0131,1.585)); +#136687 = VECTOR('',#136688,1.); +#136688 = DIRECTION('',(1.,0.,0.)); +#136689 = ORIENTED_EDGE('',*,*,#136690,.T.); +#136690 = EDGE_CURVE('',#136683,#136691,#136693,.T.); +#136691 = VERTEX_POINT('',#136692); +#136692 = CARTESIAN_POINT('',(208.55165,-122.0731,1.585)); +#136693 = CIRCLE('',#136694,5.999932016262E-02); +#136694 = AXIS2_PLACEMENT_3D('',#136695,#136696,#136697); +#136695 = CARTESIAN_POINT('',(208.49165067984,-122.0730993201,1.585)); +#136696 = DIRECTION('',(0.,0.,-1.)); +#136697 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#136698 = ORIENTED_EDGE('',*,*,#136699,.T.); +#136699 = EDGE_CURVE('',#136691,#136700,#136702,.T.); +#136700 = VERTEX_POINT('',#136701); +#136701 = CARTESIAN_POINT('',(208.55165,-123.8231,1.585)); +#136702 = LINE('',#136703,#136704); +#136703 = CARTESIAN_POINT('',(208.55165,-122.0731,1.585)); +#136704 = VECTOR('',#136705,1.); +#136705 = DIRECTION('',(0.,-1.,0.)); +#136706 = ORIENTED_EDGE('',*,*,#136707,.T.); +#136707 = EDGE_CURVE('',#136700,#136708,#136710,.T.); +#136708 = VERTEX_POINT('',#136709); +#136709 = CARTESIAN_POINT('',(209.93165,-123.8231,1.585)); +#136710 = LINE('',#136711,#136712); +#136711 = CARTESIAN_POINT('',(208.55165,-123.8231,1.585)); +#136712 = VECTOR('',#136713,1.); +#136713 = DIRECTION('',(1.,0.,0.)); +#136714 = ORIENTED_EDGE('',*,*,#136715,.T.); +#136715 = EDGE_CURVE('',#136708,#136716,#136718,.T.); +#136716 = VERTEX_POINT('',#136717); +#136717 = CARTESIAN_POINT('',(209.93165,-123.1231,1.585)); +#136718 = LINE('',#136719,#136720); +#136719 = CARTESIAN_POINT('',(209.93165,-123.8231,1.585)); +#136720 = VECTOR('',#136721,1.); +#136721 = DIRECTION('',(0.,1.,0.)); +#136722 = ORIENTED_EDGE('',*,*,#136723,.T.); +#136723 = EDGE_CURVE('',#136716,#136724,#136726,.T.); +#136724 = VERTEX_POINT('',#136725); +#136725 = CARTESIAN_POINT('',(209.99165,-123.0631,1.585)); +#136726 = CIRCLE('',#136727,5.999932016261E-02); +#136727 = AXIS2_PLACEMENT_3D('',#136728,#136729,#136730); +#136728 = CARTESIAN_POINT('',(209.99164932015,-123.1230993201,1.585)); +#136729 = DIRECTION('',(0.,0.,-1.)); +#136730 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#136731 = ORIENTED_EDGE('',*,*,#136732,.T.); +#136732 = EDGE_CURVE('',#136724,#136733,#136735,.T.); +#136733 = VERTEX_POINT('',#136734); +#136734 = CARTESIAN_POINT('',(212.88165,-123.0631,1.585)); +#136735 = LINE('',#136736,#136737); +#136736 = CARTESIAN_POINT('',(209.99165,-123.0631,1.585)); +#136737 = VECTOR('',#136738,1.); +#136738 = DIRECTION('',(1.,0.,0.)); +#136739 = ORIENTED_EDGE('',*,*,#136740,.T.); +#136740 = EDGE_CURVE('',#136733,#136741,#136743,.T.); +#136741 = VERTEX_POINT('',#136742); +#136742 = CARTESIAN_POINT('',(212.88165,-117.0831,1.585)); +#136743 = LINE('',#136744,#136745); +#136744 = CARTESIAN_POINT('',(212.88165,-123.0631,1.585)); +#136745 = VECTOR('',#136746,1.); +#136746 = DIRECTION('',(0.,1.,0.)); +#136747 = ORIENTED_EDGE('',*,*,#136748,.T.); +#136748 = EDGE_CURVE('',#136741,#136573,#136749,.T.); +#136749 = LINE('',#136750,#136751); +#136750 = CARTESIAN_POINT('',(212.88165,-117.0831,1.585)); +#136751 = VECTOR('',#136752,1.); +#136752 = DIRECTION('',(-1.,0.,0.)); +#136753 = FACE_BOUND('',#136754,.F.); +#136754 = EDGE_LOOP('',(#136755,#136765,#136773,#136781,#136789,#136798, + #136806,#136815,#136823,#136831)); +#136755 = ORIENTED_EDGE('',*,*,#136756,.T.); +#136756 = EDGE_CURVE('',#136757,#136759,#136761,.T.); +#136757 = VERTEX_POINT('',#136758); +#136758 = CARTESIAN_POINT('',(213.64165,-123.8231,1.585)); +#136759 = VERTEX_POINT('',#136760); +#136760 = CARTESIAN_POINT('',(213.64165,-116.3231,1.585)); +#136761 = LINE('',#136762,#136763); +#136762 = CARTESIAN_POINT('',(213.64165,-123.8231,1.585)); +#136763 = VECTOR('',#136764,1.); +#136764 = DIRECTION('',(0.,1.,0.)); +#136765 = ORIENTED_EDGE('',*,*,#136766,.T.); +#136766 = EDGE_CURVE('',#136759,#136767,#136769,.T.); +#136767 = VERTEX_POINT('',#136768); +#136768 = CARTESIAN_POINT('',(210.05165,-116.3231,1.585)); +#136769 = LINE('',#136770,#136771); +#136770 = CARTESIAN_POINT('',(213.64165,-116.3231,1.585)); +#136771 = VECTOR('',#136772,1.); +#136772 = DIRECTION('',(-1.,0.,0.)); +#136773 = ORIENTED_EDGE('',*,*,#136774,.T.); +#136774 = EDGE_CURVE('',#136767,#136775,#136777,.T.); +#136775 = VERTEX_POINT('',#136776); +#136776 = CARTESIAN_POINT('',(210.05165,-116.9631,1.585)); +#136777 = LINE('',#136778,#136779); +#136778 = CARTESIAN_POINT('',(210.05165,-116.3231,1.585)); +#136779 = VECTOR('',#136780,1.); +#136780 = DIRECTION('',(0.,-1.,0.)); +#136781 = ORIENTED_EDGE('',*,*,#136782,.T.); +#136782 = EDGE_CURVE('',#136775,#136783,#136785,.T.); +#136783 = VERTEX_POINT('',#136784); +#136784 = CARTESIAN_POINT('',(212.94165,-116.9631,1.585)); +#136785 = LINE('',#136786,#136787); +#136786 = CARTESIAN_POINT('',(210.05165,-116.9631,1.585)); +#136787 = VECTOR('',#136788,1.); +#136788 = DIRECTION('',(1.,0.,0.)); +#136789 = ORIENTED_EDGE('',*,*,#136790,.T.); +#136790 = EDGE_CURVE('',#136783,#136791,#136793,.T.); +#136791 = VERTEX_POINT('',#136792); +#136792 = CARTESIAN_POINT('',(213.00165,-117.0231,1.585)); +#136793 = CIRCLE('',#136794,5.999932016268E-02); +#136794 = AXIS2_PLACEMENT_3D('',#136795,#136796,#136797); +#136795 = CARTESIAN_POINT('',(212.94165067984,-117.0230993201,1.585)); +#136796 = DIRECTION('',(0.,0.,-1.)); +#136797 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#136798 = ORIENTED_EDGE('',*,*,#136799,.T.); +#136799 = EDGE_CURVE('',#136791,#136800,#136802,.T.); +#136800 = VERTEX_POINT('',#136801); +#136801 = CARTESIAN_POINT('',(213.00165,-123.1231,1.585)); +#136802 = LINE('',#136803,#136804); +#136803 = CARTESIAN_POINT('',(213.00165,-117.0231,1.585)); +#136804 = VECTOR('',#136805,1.); +#136805 = DIRECTION('',(0.,-1.,0.)); +#136806 = ORIENTED_EDGE('',*,*,#136807,.T.); +#136807 = EDGE_CURVE('',#136800,#136808,#136810,.T.); +#136808 = VERTEX_POINT('',#136809); +#136809 = CARTESIAN_POINT('',(212.94165,-123.1831,1.585)); +#136810 = CIRCLE('',#136811,5.999932016262E-02); +#136811 = AXIS2_PLACEMENT_3D('',#136812,#136813,#136814); +#136812 = CARTESIAN_POINT('',(212.94165067984,-123.1231006798,1.585)); +#136813 = DIRECTION('',(0.,0.,-1.)); +#136814 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#136815 = ORIENTED_EDGE('',*,*,#136816,.T.); +#136816 = EDGE_CURVE('',#136808,#136817,#136819,.T.); +#136817 = VERTEX_POINT('',#136818); +#136818 = CARTESIAN_POINT('',(210.05165,-123.1831,1.585)); +#136819 = LINE('',#136820,#136821); +#136820 = CARTESIAN_POINT('',(212.94165,-123.1831,1.585)); +#136821 = VECTOR('',#136822,1.); +#136822 = DIRECTION('',(-1.,0.,0.)); +#136823 = ORIENTED_EDGE('',*,*,#136824,.T.); +#136824 = EDGE_CURVE('',#136817,#136825,#136827,.T.); +#136825 = VERTEX_POINT('',#136826); +#136826 = CARTESIAN_POINT('',(210.05165,-123.8231,1.585)); +#136827 = LINE('',#136828,#136829); +#136828 = CARTESIAN_POINT('',(210.05165,-123.1831,1.585)); +#136829 = VECTOR('',#136830,1.); +#136830 = DIRECTION('',(0.,-1.,0.)); +#136831 = ORIENTED_EDGE('',*,*,#136832,.T.); +#136832 = EDGE_CURVE('',#136825,#136757,#136833,.T.); +#136833 = LINE('',#136834,#136835); +#136834 = CARTESIAN_POINT('',(210.05165,-123.8231,1.585)); +#136835 = VECTOR('',#136836,1.); +#136836 = DIRECTION('',(1.,0.,0.)); +#136837 = FACE_BOUND('',#136838,.F.); +#136838 = EDGE_LOOP('',(#136839,#136849,#136857,#136865)); +#136839 = ORIENTED_EDGE('',*,*,#136840,.T.); +#136840 = EDGE_CURVE('',#136841,#136843,#136845,.T.); +#136841 = VERTEX_POINT('',#136842); +#136842 = CARTESIAN_POINT('',(208.43165,-123.8131,1.585)); +#136843 = VERTEX_POINT('',#136844); +#136844 = CARTESIAN_POINT('',(208.43165,-122.1331,1.585)); +#136845 = LINE('',#136846,#136847); +#136846 = CARTESIAN_POINT('',(208.43165,-123.8131,1.585)); +#136847 = VECTOR('',#136848,1.); +#136848 = DIRECTION('',(0.,1.,0.)); +#136849 = ORIENTED_EDGE('',*,*,#136850,.T.); +#136850 = EDGE_CURVE('',#136843,#136851,#136853,.T.); +#136851 = VERTEX_POINT('',#136852); +#136852 = CARTESIAN_POINT('',(207.80165,-122.1331,1.585)); +#136853 = LINE('',#136854,#136855); +#136854 = CARTESIAN_POINT('',(208.43165,-122.1331,1.585)); +#136855 = VECTOR('',#136856,1.); +#136856 = DIRECTION('',(-1.,0.,0.)); +#136857 = ORIENTED_EDGE('',*,*,#136858,.T.); +#136858 = EDGE_CURVE('',#136851,#136859,#136861,.T.); +#136859 = VERTEX_POINT('',#136860); +#136860 = CARTESIAN_POINT('',(207.80165,-123.8131,1.585)); +#136861 = LINE('',#136862,#136863); +#136862 = CARTESIAN_POINT('',(207.80165,-122.1331,1.585)); +#136863 = VECTOR('',#136864,1.); +#136864 = DIRECTION('',(0.,-1.,0.)); +#136865 = ORIENTED_EDGE('',*,*,#136866,.T.); +#136866 = EDGE_CURVE('',#136859,#136841,#136867,.T.); +#136867 = LINE('',#136868,#136869); +#136868 = CARTESIAN_POINT('',(207.80165,-123.8131,1.585)); +#136869 = VECTOR('',#136870,1.); +#136870 = DIRECTION('',(1.,0.,0.)); +#136871 = FACE_BOUND('',#136872,.F.); +#136872 = EDGE_LOOP('',(#136873,#136883,#136891,#136899)); +#136873 = ORIENTED_EDGE('',*,*,#136874,.T.); +#136874 = EDGE_CURVE('',#136875,#136877,#136879,.T.); +#136875 = VERTEX_POINT('',#136876); +#136876 = CARTESIAN_POINT('',(208.43165,-120.5131,1.585)); +#136877 = VERTEX_POINT('',#136878); +#136878 = CARTESIAN_POINT('',(208.43165,-119.6331,1.585)); +#136879 = LINE('',#136880,#136881); +#136880 = CARTESIAN_POINT('',(208.43165,-120.5131,1.585)); +#136881 = VECTOR('',#136882,1.); +#136882 = DIRECTION('',(0.,1.,0.)); +#136883 = ORIENTED_EDGE('',*,*,#136884,.T.); +#136884 = EDGE_CURVE('',#136877,#136885,#136887,.T.); +#136885 = VERTEX_POINT('',#136886); +#136886 = CARTESIAN_POINT('',(207.80165,-119.6331,1.585)); +#136887 = LINE('',#136888,#136889); +#136888 = CARTESIAN_POINT('',(208.43165,-119.6331,1.585)); +#136889 = VECTOR('',#136890,1.); +#136890 = DIRECTION('',(-1.,0.,0.)); +#136891 = ORIENTED_EDGE('',*,*,#136892,.T.); +#136892 = EDGE_CURVE('',#136885,#136893,#136895,.T.); +#136893 = VERTEX_POINT('',#136894); +#136894 = CARTESIAN_POINT('',(207.80165,-120.5131,1.585)); +#136895 = LINE('',#136896,#136897); +#136896 = CARTESIAN_POINT('',(207.80165,-119.6331,1.585)); +#136897 = VECTOR('',#136898,1.); +#136898 = DIRECTION('',(0.,-1.,0.)); +#136899 = ORIENTED_EDGE('',*,*,#136900,.T.); +#136900 = EDGE_CURVE('',#136893,#136875,#136901,.T.); +#136901 = LINE('',#136902,#136903); +#136902 = CARTESIAN_POINT('',(207.80165,-120.5131,1.585)); +#136903 = VECTOR('',#136904,1.); +#136904 = DIRECTION('',(1.,0.,0.)); +#136905 = FACE_BOUND('',#136906,.F.); +#136906 = EDGE_LOOP('',(#136907,#136917,#136925,#136933)); +#136907 = ORIENTED_EDGE('',*,*,#136908,.T.); +#136908 = EDGE_CURVE('',#136909,#136911,#136913,.T.); +#136909 = VERTEX_POINT('',#136910); +#136910 = CARTESIAN_POINT('',(208.43165,-118.0131,1.585)); +#136911 = VERTEX_POINT('',#136912); +#136912 = CARTESIAN_POINT('',(208.43165,-116.3331,1.585)); +#136913 = LINE('',#136914,#136915); +#136914 = CARTESIAN_POINT('',(208.43165,-118.0131,1.585)); +#136915 = VECTOR('',#136916,1.); +#136916 = DIRECTION('',(0.,1.,0.)); +#136917 = ORIENTED_EDGE('',*,*,#136918,.T.); +#136918 = EDGE_CURVE('',#136911,#136919,#136921,.T.); +#136919 = VERTEX_POINT('',#136920); +#136920 = CARTESIAN_POINT('',(207.80165,-116.3331,1.585)); +#136921 = LINE('',#136922,#136923); +#136922 = CARTESIAN_POINT('',(208.43165,-116.3331,1.585)); +#136923 = VECTOR('',#136924,1.); +#136924 = DIRECTION('',(-1.,0.,0.)); +#136925 = ORIENTED_EDGE('',*,*,#136926,.T.); +#136926 = EDGE_CURVE('',#136919,#136927,#136929,.T.); +#136927 = VERTEX_POINT('',#136928); +#136928 = CARTESIAN_POINT('',(207.80165,-118.0131,1.585)); +#136929 = LINE('',#136930,#136931); +#136930 = CARTESIAN_POINT('',(207.80165,-116.3331,1.585)); +#136931 = VECTOR('',#136932,1.); +#136932 = DIRECTION('',(0.,-1.,0.)); +#136933 = ORIENTED_EDGE('',*,*,#136934,.T.); +#136934 = EDGE_CURVE('',#136927,#136909,#136935,.T.); +#136935 = LINE('',#136936,#136937); +#136936 = CARTESIAN_POINT('',(207.80165,-118.0131,1.585)); +#136937 = VECTOR('',#136938,1.); +#136938 = DIRECTION('',(1.,0.,0.)); +#136939 = PLANE('',#136940); +#136940 = AXIS2_PLACEMENT_3D('',#136941,#136942,#136943); +#136941 = CARTESIAN_POINT('',(0.,0.,1.585)); +#136942 = DIRECTION('',(0.,0.,1.)); +#136943 = DIRECTION('',(1.,0.,-0.)); +#136944 = SHELL_BASED_SURFACE_MODEL('',(#136945)); +#136945 = OPEN_SHELL('',(#136946)); +#136946 = ADVANCED_FACE('',(#136947),#137122,.T.); +#136947 = FACE_BOUND('',#136948,.F.); +#136948 = EDGE_LOOP('',(#136949,#136959,#136967,#136975,#136983,#136991, + #137000,#137008,#137017,#137025,#137033,#137041,#137049,#137057, + #137066,#137074,#137082,#137090,#137099,#137107,#137116)); +#136949 = ORIENTED_EDGE('',*,*,#136950,.T.); +#136950 = EDGE_CURVE('',#136951,#136953,#136955,.T.); +#136951 = VERTEX_POINT('',#136952); +#136952 = CARTESIAN_POINT('',(163.480216,-123.091643,1.585)); +#136953 = VERTEX_POINT('',#136954); +#136954 = CARTESIAN_POINT('',(163.600663,-123.033583,1.585)); +#136955 = LINE('',#136956,#136957); +#136956 = CARTESIAN_POINT('',(163.480216,-123.091643,1.585)); +#136957 = VECTOR('',#136958,1.); +#136958 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#136959 = ORIENTED_EDGE('',*,*,#136960,.T.); +#136960 = EDGE_CURVE('',#136953,#136961,#136963,.T.); +#136961 = VERTEX_POINT('',#136962); +#136962 = CARTESIAN_POINT('',(163.717938,-123.032871,1.585)); +#136963 = LINE('',#136964,#136965); +#136964 = CARTESIAN_POINT('',(163.600663,-123.033583,1.585)); +#136965 = VECTOR('',#136966,1.); +#136966 = DIRECTION('',(0.999981570774,6.071088282957E-03,0.)); +#136967 = ORIENTED_EDGE('',*,*,#136968,.T.); +#136968 = EDGE_CURVE('',#136961,#136969,#136971,.T.); +#136969 = VERTEX_POINT('',#136970); +#136970 = CARTESIAN_POINT('',(163.895058,-123.092401,1.585)); +#136971 = LINE('',#136972,#136973); +#136972 = CARTESIAN_POINT('',(163.717938,-123.032871,1.585)); +#136973 = VECTOR('',#136974,1.); +#136974 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#136975 = ORIENTED_EDGE('',*,*,#136976,.T.); +#136976 = EDGE_CURVE('',#136969,#136977,#136979,.T.); +#136977 = VERTEX_POINT('',#136978); +#136978 = CARTESIAN_POINT('',(164.349819,-123.545123,1.585)); +#136979 = LINE('',#136980,#136981); +#136980 = CARTESIAN_POINT('',(163.895058,-123.092401,1.585)); +#136981 = VECTOR('',#136982,1.); +#136982 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#136983 = ORIENTED_EDGE('',*,*,#136984,.T.); +#136984 = EDGE_CURVE('',#136977,#136985,#136987,.T.); +#136985 = VERTEX_POINT('',#136986); +#136986 = CARTESIAN_POINT('',(164.35126,-123.09251,1.585)); +#136987 = LINE('',#136988,#136989); +#136988 = CARTESIAN_POINT('',(164.349819,-123.545123,1.585)); +#136989 = VECTOR('',#136990,1.); +#136990 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#136991 = ORIENTED_EDGE('',*,*,#136992,.T.); +#136992 = EDGE_CURVE('',#136985,#136993,#136995,.T.); +#136993 = VERTEX_POINT('',#136994); +#136994 = CARTESIAN_POINT('',(164.499819,-123.107142,1.585)); +#136995 = CIRCLE('',#136996,7.500006711464E-02); +#136996 = AXIS2_PLACEMENT_3D('',#136997,#136998,#136999); +#136997 = CARTESIAN_POINT('',(164.42481893288,-123.1071419328,1.585)); +#136998 = DIRECTION('',(0.,0.,-1.)); +#136999 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#137000 = ORIENTED_EDGE('',*,*,#137001,.T.); +#137001 = EDGE_CURVE('',#136993,#137002,#137004,.T.); +#137002 = VERTEX_POINT('',#137003); +#137003 = CARTESIAN_POINT('',(164.498378,-123.740821,1.585)); +#137004 = LINE('',#137005,#137006); +#137005 = CARTESIAN_POINT('',(164.499819,-123.107142,1.585)); +#137006 = VECTOR('',#137007,1.); +#137007 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#137008 = ORIENTED_EDGE('',*,*,#137009,.T.); +#137009 = EDGE_CURVE('',#137002,#137010,#137012,.T.); +#137010 = VERTEX_POINT('',#137011); +#137011 = CARTESIAN_POINT('',(164.439451,-123.799748,1.585)); +#137012 = CIRCLE('',#137013,7.499663284014E-02); +#137013 = AXIS2_PLACEMENT_3D('',#137014,#137015,#137016); +#137014 = CARTESIAN_POINT('',(164.42482198775,-123.7261919877,1.585)); +#137015 = DIRECTION('',(0.,0.,-1.)); +#137016 = DIRECTION('',(0.980790863049,-0.195062254064,0.)); +#137017 = ORIENTED_EDGE('',*,*,#137018,.T.); +#137018 = EDGE_CURVE('',#137010,#137019,#137021,.T.); +#137019 = VERTEX_POINT('',#137020); +#137020 = CARTESIAN_POINT('',(164.402268,-123.796468,1.585)); +#137021 = LINE('',#137022,#137023); +#137022 = CARTESIAN_POINT('',(164.439451,-123.799748,1.585)); +#137023 = VECTOR('',#137024,1.); +#137024 = DIRECTION('',(-0.996131850393,8.787113652145E-02,0.)); +#137025 = ORIENTED_EDGE('',*,*,#137026,.T.); +#137026 = EDGE_CURVE('',#137019,#137027,#137029,.T.); +#137027 = VERTEX_POINT('',#137028); +#137028 = CARTESIAN_POINT('',(164.371786,-123.779222,1.585)); +#137029 = LINE('',#137030,#137031); +#137030 = CARTESIAN_POINT('',(164.402268,-123.796468,1.585)); +#137031 = VECTOR('',#137032,1.); +#137032 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#137033 = ORIENTED_EDGE('',*,*,#137034,.T.); +#137034 = EDGE_CURVE('',#137027,#137035,#137037,.T.); +#137035 = VERTEX_POINT('',#137036); +#137036 = CARTESIAN_POINT('',(163.812876,-123.220313,1.585)); +#137037 = LINE('',#137038,#137039); +#137038 = CARTESIAN_POINT('',(164.371786,-123.779222,1.585)); +#137039 = VECTOR('',#137040,1.); +#137040 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#137041 = ORIENTED_EDGE('',*,*,#137042,.T.); +#137042 = EDGE_CURVE('',#137035,#137043,#137045,.T.); +#137043 = VERTEX_POINT('',#137044); +#137044 = CARTESIAN_POINT('',(163.698363,-123.182142,1.585)); +#137045 = LINE('',#137046,#137047); +#137046 = CARTESIAN_POINT('',(163.812876,-123.220313,1.585)); +#137047 = VECTOR('',#137048,1.); +#137048 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#137049 = ORIENTED_EDGE('',*,*,#137050,.T.); +#137050 = EDGE_CURVE('',#137043,#137051,#137053,.T.); +#137051 = VERTEX_POINT('',#137052); +#137052 = CARTESIAN_POINT('',(163.633,-123.182142,1.585)); +#137053 = LINE('',#137054,#137055); +#137054 = CARTESIAN_POINT('',(163.698363,-123.182142,1.585)); +#137055 = VECTOR('',#137056,1.); +#137056 = DIRECTION('',(-1.,0.,0.)); +#137057 = ORIENTED_EDGE('',*,*,#137058,.T.); +#137058 = EDGE_CURVE('',#137051,#137059,#137061,.T.); +#137059 = VERTEX_POINT('',#137060); +#137060 = CARTESIAN_POINT('',(163.499819,-123.315323,1.585)); +#137061 = CIRCLE('',#137062,0.18686440374); +#137062 = AXIS2_PLACEMENT_3D('',#137063,#137064,#137065); +#137063 = CARTESIAN_POINT('',(163.680536,-123.362859,1.585)); +#137064 = DIRECTION('',(0.,0.,1.)); +#137065 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#137066 = ORIENTED_EDGE('',*,*,#137067,.T.); +#137067 = EDGE_CURVE('',#137059,#137068,#137070,.T.); +#137068 = VERTEX_POINT('',#137069); +#137069 = CARTESIAN_POINT('',(163.499819,-123.518008,1.585)); +#137070 = LINE('',#137071,#137072); +#137071 = CARTESIAN_POINT('',(163.499819,-123.315323,1.585)); +#137072 = VECTOR('',#137073,1.); +#137073 = DIRECTION('',(0.,-1.,0.)); +#137074 = ORIENTED_EDGE('',*,*,#137075,.T.); +#137075 = EDGE_CURVE('',#137068,#137076,#137078,.T.); +#137076 = VERTEX_POINT('',#137077); +#137077 = CARTESIAN_POINT('',(163.534077,-123.586524,1.585)); +#137078 = LINE('',#137079,#137080); +#137079 = CARTESIAN_POINT('',(163.499819,-123.518008,1.585)); +#137080 = VECTOR('',#137081,1.); +#137081 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#137082 = ORIENTED_EDGE('',*,*,#137083,.T.); +#137083 = EDGE_CURVE('',#137076,#137084,#137086,.T.); +#137084 = VERTEX_POINT('',#137085); +#137085 = CARTESIAN_POINT('',(163.582417,-123.636902,1.585)); +#137086 = LINE('',#137087,#137088); +#137087 = CARTESIAN_POINT('',(163.534077,-123.586524,1.585)); +#137088 = VECTOR('',#137089,1.); +#137089 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#137090 = ORIENTED_EDGE('',*,*,#137091,.T.); +#137091 = EDGE_CURVE('',#137084,#137092,#137094,.T.); +#137092 = VERTEX_POINT('',#137093); +#137093 = CARTESIAN_POINT('',(163.467024,-123.731603,1.585)); +#137094 = CIRCLE('',#137095,7.500003178655E-02); +#137095 = AXIS2_PLACEMENT_3D('',#137096,#137097,#137098); +#137096 = CARTESIAN_POINT('',(163.52005656212,-123.6785695,1.585)); +#137097 = DIRECTION('',(0.,0.,-1.)); +#137098 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#137099 = ORIENTED_EDGE('',*,*,#137100,.T.); +#137100 = EDGE_CURVE('',#137092,#137101,#137103,.T.); +#137101 = VERTEX_POINT('',#137102); +#137102 = CARTESIAN_POINT('',(163.405356,-123.664492,1.585)); +#137103 = LINE('',#137104,#137105); +#137104 = CARTESIAN_POINT('',(163.467024,-123.731603,1.585)); +#137105 = VECTOR('',#137106,1.); +#137106 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#137107 = ORIENTED_EDGE('',*,*,#137108,.T.); +#137108 = EDGE_CURVE('',#137101,#137109,#137111,.T.); +#137109 = VERTEX_POINT('',#137110); +#137110 = CARTESIAN_POINT('',(163.414686,-123.155096,1.585)); +#137111 = CIRCLE('',#137112,0.450051227017); +#137112 = AXIS2_PLACEMENT_3D('',#137113,#137114,#137115); +#137113 = CARTESIAN_POINT('',(163.78097532415,-123.4165883286,1.585)); +#137114 = DIRECTION('',(0.,0.,-1.)); +#137115 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#137116 = ORIENTED_EDGE('',*,*,#137117,.T.); +#137117 = EDGE_CURVE('',#137109,#136951,#137118,.T.); +#137118 = LINE('',#137119,#137120); +#137119 = CARTESIAN_POINT('',(163.414686,-123.155096,1.585)); +#137120 = VECTOR('',#137121,1.); +#137121 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#137122 = PLANE('',#137123); +#137123 = AXIS2_PLACEMENT_3D('',#137124,#137125,#137126); +#137124 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137125 = DIRECTION('',(0.,0.,1.)); +#137126 = DIRECTION('',(1.,0.,-0.)); +#137127 = SHELL_BASED_SURFACE_MODEL('',(#137128)); +#137128 = OPEN_SHELL('',(#137129)); +#137129 = ADVANCED_FACE('',(#137130),#137264,.T.); +#137130 = FACE_BOUND('',#137131,.F.); +#137131 = EDGE_LOOP('',(#137132,#137143,#137151,#137160,#137168,#137176, + #137184,#137192,#137201,#137209,#137217,#137225,#137234,#137242, + #137250,#137258)); +#137132 = ORIENTED_EDGE('',*,*,#137133,.T.); +#137133 = EDGE_CURVE('',#137134,#137136,#137138,.T.); +#137134 = VERTEX_POINT('',#137135); +#137135 = CARTESIAN_POINT('',(160.408151,-123.044782,1.585)); +#137136 = VERTEX_POINT('',#137137); +#137137 = CARTESIAN_POINT('',(160.524819,-123.107142,1.585)); +#137138 = CIRCLE('',#137139,7.500000000004E-02); +#137139 = AXIS2_PLACEMENT_3D('',#137140,#137141,#137142); +#137140 = CARTESIAN_POINT('',(160.449819,-123.1071420655,1.585)); +#137141 = DIRECTION('',(0.,0.,-1.)); +#137142 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#137143 = ORIENTED_EDGE('',*,*,#137144,.T.); +#137144 = EDGE_CURVE('',#137136,#137145,#137147,.T.); +#137145 = VERTEX_POINT('',#137146); +#137146 = CARTESIAN_POINT('',(160.523378,-123.693202,1.585)); +#137147 = LINE('',#137148,#137149); +#137148 = CARTESIAN_POINT('',(160.524819,-123.107142,1.585)); +#137149 = VECTOR('',#137150,1.); +#137150 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#137151 = ORIENTED_EDGE('',*,*,#137152,.T.); +#137152 = EDGE_CURVE('',#137145,#137153,#137155,.T.); +#137153 = VERTEX_POINT('',#137154); +#137154 = CARTESIAN_POINT('',(160.374819,-123.67857,1.585)); +#137155 = CIRCLE('',#137156,7.500006711464E-02); +#137156 = AXIS2_PLACEMENT_3D('',#137157,#137158,#137159); +#137157 = CARTESIAN_POINT('',(160.44981906711,-123.6785700671,1.585)); +#137158 = DIRECTION('',(-0.,0.,-1.)); +#137159 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#137160 = ORIENTED_EDGE('',*,*,#137161,.T.); +#137161 = EDGE_CURVE('',#137153,#137162,#137164,.T.); +#137162 = VERTEX_POINT('',#137163); +#137163 = CARTESIAN_POINT('',(160.374819,-123.467856,1.585)); +#137164 = LINE('',#137165,#137166); +#137165 = CARTESIAN_POINT('',(160.374819,-123.67857,1.585)); +#137166 = VECTOR('',#137167,1.); +#137167 = DIRECTION('',(0.,1.,0.)); +#137168 = ORIENTED_EDGE('',*,*,#137169,.T.); +#137169 = EDGE_CURVE('',#137162,#137170,#137172,.T.); +#137170 = VERTEX_POINT('',#137171); +#137171 = CARTESIAN_POINT('',(159.678504,-123.467856,1.585)); +#137172 = LINE('',#137173,#137174); +#137173 = CARTESIAN_POINT('',(160.374819,-123.467856,1.585)); +#137174 = VECTOR('',#137175,1.); +#137175 = DIRECTION('',(-1.,0.,0.)); +#137176 = ORIENTED_EDGE('',*,*,#137177,.T.); +#137177 = EDGE_CURVE('',#137170,#137178,#137180,.T.); +#137178 = VERTEX_POINT('',#137179); +#137179 = CARTESIAN_POINT('',(159.751033,-123.543496,1.585)); +#137180 = LINE('',#137181,#137182); +#137181 = CARTESIAN_POINT('',(159.678504,-123.467856,1.585)); +#137182 = VECTOR('',#137183,1.); +#137183 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#137184 = ORIENTED_EDGE('',*,*,#137185,.T.); +#137185 = EDGE_CURVE('',#137178,#137186,#137188,.T.); +#137186 = VERTEX_POINT('',#137187); +#137187 = CARTESIAN_POINT('',(159.80787,-123.65876,1.585)); +#137188 = LINE('',#137189,#137190); +#137189 = CARTESIAN_POINT('',(159.751033,-123.543496,1.585)); +#137190 = VECTOR('',#137191,1.); +#137191 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#137192 = ORIENTED_EDGE('',*,*,#137193,.T.); +#137193 = EDGE_CURVE('',#137186,#137194,#137196,.T.); +#137194 = VERTEX_POINT('',#137195); +#137195 = CARTESIAN_POINT('',(159.668451,-123.712111,1.585)); +#137196 = CIRCLE('',#137197,7.500029440469E-02); +#137197 = AXIS2_PLACEMENT_3D('',#137198,#137199,#137200); +#137198 = CARTESIAN_POINT('',(159.73553305397,-123.6785693513,1.585)); +#137199 = DIRECTION('',(0.,0.,-1.)); +#137200 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#137201 = ORIENTED_EDGE('',*,*,#137202,.T.); +#137202 = EDGE_CURVE('',#137194,#137203,#137205,.T.); +#137203 = VERTEX_POINT('',#137204); +#137204 = CARTESIAN_POINT('',(159.626275,-123.627759,1.585)); +#137205 = LINE('',#137206,#137207); +#137206 = CARTESIAN_POINT('',(159.668451,-123.712111,1.585)); +#137207 = VECTOR('',#137208,1.); +#137208 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#137209 = ORIENTED_EDGE('',*,*,#137210,.T.); +#137210 = EDGE_CURVE('',#137203,#137211,#137213,.T.); +#137211 = VERTEX_POINT('',#137212); +#137212 = CARTESIAN_POINT('',(159.544894,-123.546378,1.585)); +#137213 = LINE('',#137214,#137215); +#137214 = CARTESIAN_POINT('',(159.626275,-123.627759,1.585)); +#137215 = VECTOR('',#137216,1.); +#137216 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#137217 = ORIENTED_EDGE('',*,*,#137218,.T.); +#137218 = EDGE_CURVE('',#137211,#137219,#137221,.T.); +#137219 = VERTEX_POINT('',#137220); +#137220 = CARTESIAN_POINT('',(159.396841,-123.445944,1.585)); +#137221 = LINE('',#137222,#137223); +#137222 = CARTESIAN_POINT('',(159.544894,-123.546378,1.585)); +#137223 = VECTOR('',#137224,1.); +#137224 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#137225 = ORIENTED_EDGE('',*,*,#137226,.T.); +#137226 = EDGE_CURVE('',#137219,#137227,#137229,.T.); +#137227 = VERTEX_POINT('',#137228); +#137228 = CARTESIAN_POINT('',(159.449819,-123.317856,1.585)); +#137229 = CIRCLE('',#137230,7.499993751707E-02); +#137230 = AXIS2_PLACEMENT_3D('',#137231,#137232,#137233); +#137231 = CARTESIAN_POINT('',(159.44981880902,-123.3928559375,1.585)); +#137232 = DIRECTION('',(0.,0.,-1.)); +#137233 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#137234 = ORIENTED_EDGE('',*,*,#137235,.T.); +#137235 = EDGE_CURVE('',#137227,#137236,#137238,.T.); +#137236 = VERTEX_POINT('',#137237); +#137237 = CARTESIAN_POINT('',(160.374819,-123.317856,1.585)); +#137238 = LINE('',#137239,#137240); +#137239 = CARTESIAN_POINT('',(159.449819,-123.317856,1.585)); +#137240 = VECTOR('',#137241,1.); +#137241 = DIRECTION('',(1.,0.,0.)); +#137242 = ORIENTED_EDGE('',*,*,#137243,.T.); +#137243 = EDGE_CURVE('',#137236,#137244,#137246,.T.); +#137244 = VERTEX_POINT('',#137245); +#137245 = CARTESIAN_POINT('',(160.37626,-123.09251,1.585)); +#137246 = LINE('',#137247,#137248); +#137247 = CARTESIAN_POINT('',(160.374819,-123.317856,1.585)); +#137248 = VECTOR('',#137249,1.); +#137249 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#137250 = ORIENTED_EDGE('',*,*,#137251,.T.); +#137251 = EDGE_CURVE('',#137244,#137252,#137254,.T.); +#137252 = VERTEX_POINT('',#137253); +#137253 = CARTESIAN_POINT('',(160.387459,-123.065474,1.585)); +#137254 = LINE('',#137255,#137256); +#137255 = CARTESIAN_POINT('',(160.37626,-123.09251,1.585)); +#137256 = VECTOR('',#137257,1.); +#137257 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#137258 = ORIENTED_EDGE('',*,*,#137259,.T.); +#137259 = EDGE_CURVE('',#137252,#137134,#137260,.T.); +#137260 = LINE('',#137261,#137262); +#137261 = CARTESIAN_POINT('',(160.387459,-123.065474,1.585)); +#137262 = VECTOR('',#137263,1.); +#137263 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#137264 = PLANE('',#137265); +#137265 = AXIS2_PLACEMENT_3D('',#137266,#137267,#137268); +#137266 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137267 = DIRECTION('',(0.,0.,1.)); +#137268 = DIRECTION('',(1.,0.,-0.)); +#137269 = SHELL_BASED_SURFACE_MODEL('',(#137270)); +#137270 = OPEN_SHELL('',(#137271)); +#137271 = ADVANCED_FACE('',(#137272),#137388,.T.); +#137272 = FACE_BOUND('',#137273,.F.); +#137273 = EDGE_LOOP('',(#137274,#137285,#137293,#137301,#137309,#137318, + #137326,#137334,#137342,#137350,#137358,#137366,#137374,#137382)); +#137274 = ORIENTED_EDGE('',*,*,#137275,.T.); +#137275 = EDGE_CURVE('',#137276,#137278,#137280,.T.); +#137276 = VERTEX_POINT('',#137277); +#137277 = CARTESIAN_POINT('',(163.486217,-120.350139,1.585)); +#137278 = VERTEX_POINT('',#137279); +#137279 = CARTESIAN_POINT('',(163.584076,-120.330674,1.585)); +#137280 = CIRCLE('',#137281,5.999850008893E-02); +#137281 = AXIS2_PLACEMENT_3D('',#137282,#137283,#137284); +#137282 = CARTESIAN_POINT('',(163.54164907544,-120.3730977679,1.585)); +#137283 = DIRECTION('',(0.,0.,-1.)); +#137284 = DIRECTION('',(-0.923891019961,0.382655698031,0.)); +#137285 = ORIENTED_EDGE('',*,*,#137286,.T.); +#137286 = EDGE_CURVE('',#137278,#137287,#137289,.T.); +#137287 = VERTEX_POINT('',#137288); +#137288 = CARTESIAN_POINT('',(165.666503,-122.4131,1.585)); +#137289 = LINE('',#137290,#137291); +#137290 = CARTESIAN_POINT('',(163.584076,-120.330674,1.585)); +#137291 = VECTOR('',#137292,1.); +#137292 = DIRECTION('',(0.707106950966,-0.707106611407,0.)); +#137293 = ORIENTED_EDGE('',*,*,#137294,.T.); +#137294 = EDGE_CURVE('',#137287,#137295,#137297,.T.); +#137295 = VERTEX_POINT('',#137296); +#137296 = CARTESIAN_POINT('',(169.716798,-122.4131,1.585)); +#137297 = LINE('',#137298,#137299); +#137298 = CARTESIAN_POINT('',(165.666503,-122.4131,1.585)); +#137299 = VECTOR('',#137300,1.); +#137300 = DIRECTION('',(1.,0.,0.)); +#137301 = ORIENTED_EDGE('',*,*,#137302,.T.); +#137302 = EDGE_CURVE('',#137295,#137303,#137305,.T.); +#137303 = VERTEX_POINT('',#137304); +#137304 = CARTESIAN_POINT('',(171.799223,-120.330674,1.585)); +#137305 = LINE('',#137306,#137307); +#137306 = CARTESIAN_POINT('',(169.716798,-122.4131,1.585)); +#137307 = VECTOR('',#137308,1.); +#137308 = DIRECTION('',(0.707106611407,0.707106950966,0.)); +#137309 = ORIENTED_EDGE('',*,*,#137310,.T.); +#137310 = EDGE_CURVE('',#137303,#137311,#137313,.T.); +#137311 = VERTEX_POINT('',#137312); +#137312 = CARTESIAN_POINT('',(171.884076,-120.415527,1.585)); +#137313 = CIRCLE('',#137314,6.000013170922E-02); +#137314 = AXIS2_PLACEMENT_3D('',#137315,#137316,#137317); +#137315 = CARTESIAN_POINT('',(171.8416500587,-120.3730999412,1.585)); +#137316 = DIRECTION('',(0.,0.,-1.)); +#137317 = DIRECTION('',(-0.707116092923,0.707097469327,0.)); +#137318 = ORIENTED_EDGE('',*,*,#137319,.T.); +#137319 = EDGE_CURVE('',#137311,#137320,#137322,.T.); +#137320 = VERTEX_POINT('',#137321); +#137321 = CARTESIAN_POINT('',(169.784076,-122.515526,1.585)); +#137322 = LINE('',#137323,#137324); +#137323 = CARTESIAN_POINT('',(171.884076,-120.415527,1.585)); +#137324 = VECTOR('',#137325,1.); +#137325 = DIRECTION('',(-0.707106949545,-0.707106612828,0.)); +#137326 = ORIENTED_EDGE('',*,*,#137327,.T.); +#137327 = EDGE_CURVE('',#137320,#137328,#137330,.T.); +#137328 = VERTEX_POINT('',#137329); +#137329 = CARTESIAN_POINT('',(169.764611,-122.528533,1.585)); +#137330 = LINE('',#137331,#137332); +#137331 = CARTESIAN_POINT('',(169.784076,-122.515526,1.585)); +#137332 = VECTOR('',#137333,1.); +#137333 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#137334 = ORIENTED_EDGE('',*,*,#137335,.T.); +#137335 = EDGE_CURVE('',#137328,#137336,#137338,.T.); +#137336 = VERTEX_POINT('',#137337); +#137337 = CARTESIAN_POINT('',(169.74165,-122.5331,1.585)); +#137338 = LINE('',#137339,#137340); +#137339 = CARTESIAN_POINT('',(169.764611,-122.528533,1.585)); +#137340 = VECTOR('',#137341,1.); +#137341 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#137342 = ORIENTED_EDGE('',*,*,#137343,.T.); +#137343 = EDGE_CURVE('',#137336,#137344,#137346,.T.); +#137344 = VERTEX_POINT('',#137345); +#137345 = CARTESIAN_POINT('',(165.64165,-122.5331,1.585)); +#137346 = LINE('',#137347,#137348); +#137347 = CARTESIAN_POINT('',(169.74165,-122.5331,1.585)); +#137348 = VECTOR('',#137349,1.); +#137349 = DIRECTION('',(-1.,0.,0.)); +#137350 = ORIENTED_EDGE('',*,*,#137351,.T.); +#137351 = EDGE_CURVE('',#137344,#137352,#137354,.T.); +#137352 = VERTEX_POINT('',#137353); +#137353 = CARTESIAN_POINT('',(165.618688,-122.528533,1.585)); +#137354 = LINE('',#137355,#137356); +#137355 = CARTESIAN_POINT('',(165.64165,-122.5331,1.585)); +#137356 = VECTOR('',#137357,1.); +#137357 = DIRECTION('',(-0.980788760097,0.195072827601,0.)); +#137358 = ORIENTED_EDGE('',*,*,#137359,.T.); +#137359 = EDGE_CURVE('',#137352,#137360,#137362,.T.); +#137360 = VERTEX_POINT('',#137361); +#137361 = CARTESIAN_POINT('',(165.599223,-122.515526,1.585)); +#137362 = LINE('',#137363,#137364); +#137363 = CARTESIAN_POINT('',(165.618688,-122.528533,1.585)); +#137364 = VECTOR('',#137365,1.); +#137365 = DIRECTION('',(-0.831451797698,0.555596893535,0.)); +#137366 = ORIENTED_EDGE('',*,*,#137367,.T.); +#137367 = EDGE_CURVE('',#137360,#137368,#137370,.T.); +#137368 = VERTEX_POINT('',#137369); +#137369 = CARTESIAN_POINT('',(163.499224,-120.415526,1.585)); +#137370 = LINE('',#137371,#137372); +#137371 = CARTESIAN_POINT('',(165.599223,-122.515526,1.585)); +#137372 = VECTOR('',#137373,1.); +#137373 = DIRECTION('',(-0.707106612828,0.707106949545,0.)); +#137374 = ORIENTED_EDGE('',*,*,#137375,.T.); +#137375 = EDGE_CURVE('',#137368,#137376,#137378,.T.); +#137376 = VERTEX_POINT('',#137377); +#137377 = CARTESIAN_POINT('',(163.486217,-120.396061,1.585)); +#137378 = LINE('',#137379,#137380); +#137379 = CARTESIAN_POINT('',(163.499224,-120.415526,1.585)); +#137380 = VECTOR('',#137381,1.); +#137381 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#137382 = ORIENTED_EDGE('',*,*,#137383,.T.); +#137383 = EDGE_CURVE('',#137376,#137276,#137384,.T.); +#137384 = LINE('',#137385,#137386); +#137385 = CARTESIAN_POINT('',(163.486217,-120.396061,1.585)); +#137386 = VECTOR('',#137387,1.); +#137387 = DIRECTION('',(0.,1.,0.)); +#137388 = PLANE('',#137389); +#137389 = AXIS2_PLACEMENT_3D('',#137390,#137391,#137392); +#137390 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137391 = DIRECTION('',(0.,0.,1.)); +#137392 = DIRECTION('',(1.,0.,-0.)); +#137393 = SHELL_BASED_SURFACE_MODEL('',(#137394)); +#137394 = OPEN_SHELL('',(#137395)); +#137395 = ADVANCED_FACE('',(#137396,#137481),#137540,.T.); +#137396 = FACE_BOUND('',#137397,.F.); +#137397 = EDGE_LOOP('',(#137398,#137409,#137417,#137425,#137433,#137442, + #137450,#137459,#137467,#137475)); +#137398 = ORIENTED_EDGE('',*,*,#137399,.T.); +#137399 = EDGE_CURVE('',#137400,#137402,#137404,.T.); +#137400 = VERTEX_POINT('',#137401); +#137401 = CARTESIAN_POINT('',(206.151866,-120.700458,1.585)); +#137402 = VERTEX_POINT('',#137403); +#137403 = CARTESIAN_POINT('',(206.635776,-120.771354,1.585)); +#137404 = CIRCLE('',#137405,0.34461174713); +#137405 = AXIS2_PLACEMENT_3D('',#137406,#137407,#137408); +#137406 = CARTESIAN_POINT('',(206.35862294377,-120.9761549757,1.585)); +#137407 = DIRECTION('',(0.,0.,-1.)); +#137408 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#137409 = ORIENTED_EDGE('',*,*,#137410,.T.); +#137410 = EDGE_CURVE('',#137402,#137411,#137413,.T.); +#137411 = VERTEX_POINT('',#137412); +#137412 = CARTESIAN_POINT('',(206.693837,-120.891801,1.585)); +#137413 = LINE('',#137414,#137415); +#137414 = CARTESIAN_POINT('',(206.635776,-120.771354,1.585)); +#137415 = VECTOR('',#137416,1.); +#137416 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#137417 = ORIENTED_EDGE('',*,*,#137418,.T.); +#137418 = EDGE_CURVE('',#137411,#137419,#137421,.T.); +#137419 = VERTEX_POINT('',#137420); +#137420 = CARTESIAN_POINT('',(206.695278,-121.212385,1.585)); +#137421 = LINE('',#137422,#137423); +#137422 = CARTESIAN_POINT('',(206.693837,-120.891801,1.585)); +#137423 = VECTOR('',#137424,1.); +#137424 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#137425 = ORIENTED_EDGE('',*,*,#137426,.T.); +#137426 = EDGE_CURVE('',#137419,#137427,#137429,.T.); +#137427 = VERTEX_POINT('',#137428); +#137428 = CARTESIAN_POINT('',(207.111101,-121.213826,1.585)); +#137429 = LINE('',#137430,#137431); +#137430 = CARTESIAN_POINT('',(206.695278,-121.212385,1.585)); +#137431 = VECTOR('',#137432,1.); +#137432 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#137433 = ORIENTED_EDGE('',*,*,#137434,.T.); +#137434 = EDGE_CURVE('',#137427,#137435,#137437,.T.); +#137435 = VERTEX_POINT('',#137436); +#137436 = CARTESIAN_POINT('',(207.096469,-121.362385,1.585)); +#137437 = CIRCLE('',#137438,7.500006711464E-02); +#137438 = AXIS2_PLACEMENT_3D('',#137439,#137440,#137441); +#137439 = CARTESIAN_POINT('',(207.09646906711,-121.2873849328,1.585)); +#137440 = DIRECTION('',(0.,0.,-1.)); +#137441 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#137442 = ORIENTED_EDGE('',*,*,#137443,.T.); +#137443 = EDGE_CURVE('',#137435,#137444,#137446,.T.); +#137444 = VERTEX_POINT('',#137445); +#137445 = CARTESIAN_POINT('',(206.081837,-121.360944,1.585)); +#137446 = LINE('',#137447,#137448); +#137447 = CARTESIAN_POINT('',(207.096469,-121.362385,1.585)); +#137448 = VECTOR('',#137449,1.); +#137449 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#137450 = ORIENTED_EDGE('',*,*,#137451,.T.); +#137451 = EDGE_CURVE('',#137444,#137452,#137454,.T.); +#137452 = VERTEX_POINT('',#137453); +#137453 = CARTESIAN_POINT('',(206.021469,-121.287385,1.585)); +#137454 = CIRCLE('',#137455,7.500074938985E-02); +#137455 = AXIS2_PLACEMENT_3D('',#137456,#137457,#137458); +#137456 = CARTESIAN_POINT('',(206.09646974938,-121.2873845338,1.585)); +#137457 = DIRECTION('',(0.,0.,-1.)); +#137458 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#137459 = ORIENTED_EDGE('',*,*,#137460,.T.); +#137460 = EDGE_CURVE('',#137452,#137461,#137463,.T.); +#137461 = VERTEX_POINT('',#137462); +#137462 = CARTESIAN_POINT('',(206.024132,-120.886624,1.585)); +#137463 = LINE('',#137464,#137465); +#137464 = CARTESIAN_POINT('',(206.021469,-121.287385,1.585)); +#137465 = VECTOR('',#137466,1.); +#137466 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#137467 = ORIENTED_EDGE('',*,*,#137468,.T.); +#137468 = EDGE_CURVE('',#137461,#137469,#137471,.T.); +#137469 = VERTEX_POINT('',#137470); +#137470 = CARTESIAN_POINT('',(206.086336,-120.763911,1.585)); +#137471 = LINE('',#137472,#137473); +#137472 = CARTESIAN_POINT('',(206.024132,-120.886624,1.585)); +#137473 = VECTOR('',#137474,1.); +#137474 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#137475 = ORIENTED_EDGE('',*,*,#137476,.T.); +#137476 = EDGE_CURVE('',#137469,#137400,#137477,.T.); +#137477 = LINE('',#137478,#137479); +#137478 = CARTESIAN_POINT('',(206.086336,-120.763911,1.585)); +#137479 = VECTOR('',#137480,1.); +#137480 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#137481 = FACE_BOUND('',#137482,.F.); +#137482 = EDGE_LOOP('',(#137483,#137494,#137502,#137510,#137518,#137526, + #137534)); +#137483 = ORIENTED_EDGE('',*,*,#137484,.T.); +#137484 = EDGE_CURVE('',#137485,#137487,#137489,.T.); +#137485 = VERTEX_POINT('',#137486); +#137486 = CARTESIAN_POINT('',(206.480613,-120.825215,1.585)); +#137487 = VERTEX_POINT('',#137488); +#137488 = CARTESIAN_POINT('',(206.205727,-120.855622,1.585)); +#137489 = CIRCLE('',#137490,0.198386215365); +#137490 = AXIS2_PLACEMENT_3D('',#137491,#137492,#137493); +#137491 = CARTESIAN_POINT('',(206.35880995783,-120.9818071753,1.585)); +#137492 = DIRECTION('',(0.,0.,1.)); +#137493 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#137494 = ORIENTED_EDGE('',*,*,#137495,.T.); +#137495 = EDGE_CURVE('',#137487,#137496,#137498,.T.); +#137496 = VERTEX_POINT('',#137497); +#137497 = CARTESIAN_POINT('',(206.171469,-120.924138,1.585)); +#137498 = LINE('',#137499,#137500); +#137499 = CARTESIAN_POINT('',(206.205727,-120.855622,1.585)); +#137500 = VECTOR('',#137501,1.); +#137501 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#137502 = ORIENTED_EDGE('',*,*,#137503,.T.); +#137503 = EDGE_CURVE('',#137496,#137504,#137506,.T.); +#137504 = VERTEX_POINT('',#137505); +#137505 = CARTESIAN_POINT('',(206.171469,-121.212385,1.585)); +#137506 = LINE('',#137507,#137508); +#137507 = CARTESIAN_POINT('',(206.171469,-120.924138,1.585)); +#137508 = VECTOR('',#137509,1.); +#137509 = DIRECTION('',(0.,-1.,0.)); +#137510 = ORIENTED_EDGE('',*,*,#137511,.T.); +#137511 = EDGE_CURVE('',#137504,#137512,#137514,.T.); +#137512 = VERTEX_POINT('',#137513); +#137513 = CARTESIAN_POINT('',(206.545278,-121.212385,1.585)); +#137514 = LINE('',#137515,#137516); +#137515 = CARTESIAN_POINT('',(206.171469,-121.212385,1.585)); +#137516 = VECTOR('',#137517,1.); +#137517 = DIRECTION('',(1.,0.,0.)); +#137518 = ORIENTED_EDGE('',*,*,#137519,.T.); +#137519 = EDGE_CURVE('',#137512,#137520,#137522,.T.); +#137520 = VERTEX_POINT('',#137521); +#137521 = CARTESIAN_POINT('',(206.545278,-120.924138,1.585)); +#137522 = LINE('',#137523,#137524); +#137523 = CARTESIAN_POINT('',(206.545278,-121.212385,1.585)); +#137524 = VECTOR('',#137525,1.); +#137525 = DIRECTION('',(0.,1.,0.)); +#137526 = ORIENTED_EDGE('',*,*,#137527,.T.); +#137527 = EDGE_CURVE('',#137520,#137528,#137530,.T.); +#137528 = VERTEX_POINT('',#137529); +#137529 = CARTESIAN_POINT('',(206.51102,-120.855622,1.585)); +#137530 = LINE('',#137531,#137532); +#137531 = CARTESIAN_POINT('',(206.545278,-120.924138,1.585)); +#137532 = VECTOR('',#137533,1.); +#137533 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#137534 = ORIENTED_EDGE('',*,*,#137535,.T.); +#137535 = EDGE_CURVE('',#137528,#137485,#137536,.T.); +#137536 = LINE('',#137537,#137538); +#137537 = CARTESIAN_POINT('',(206.51102,-120.855622,1.585)); +#137538 = VECTOR('',#137539,1.); +#137539 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#137540 = PLANE('',#137541); +#137541 = AXIS2_PLACEMENT_3D('',#137542,#137543,#137544); +#137542 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137543 = DIRECTION('',(0.,0.,1.)); +#137544 = DIRECTION('',(1.,0.,-0.)); +#137545 = SHELL_BASED_SURFACE_MODEL('',(#137546)); +#137546 = OPEN_SHELL('',(#137547)); +#137547 = ADVANCED_FACE('',(#137548),#137673,.T.); +#137548 = FACE_BOUND('',#137549,.F.); +#137549 = EDGE_LOOP('',(#137550,#137560,#137568,#137577,#137585,#137594, + #137602,#137610,#137618,#137626,#137635,#137643,#137651,#137659, + #137667)); +#137550 = ORIENTED_EDGE('',*,*,#137551,.T.); +#137551 = EDGE_CURVE('',#137552,#137554,#137556,.T.); +#137552 = VERTEX_POINT('',#137553); +#137553 = CARTESIAN_POINT('',(182.823126,-118.857667,1.585)); +#137554 = VERTEX_POINT('',#137555); +#137555 = CARTESIAN_POINT('',(182.846087,-118.8531,1.585)); +#137556 = LINE('',#137557,#137558); +#137557 = CARTESIAN_POINT('',(182.823126,-118.857667,1.585)); +#137558 = VECTOR('',#137559,1.); +#137559 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#137560 = ORIENTED_EDGE('',*,*,#137561,.T.); +#137561 = EDGE_CURVE('',#137554,#137562,#137564,.T.); +#137562 = VERTEX_POINT('',#137563); +#137563 = CARTESIAN_POINT('',(188.60165,-118.8531,1.585)); +#137564 = LINE('',#137565,#137566); +#137565 = CARTESIAN_POINT('',(182.846087,-118.8531,1.585)); +#137566 = VECTOR('',#137567,1.); +#137567 = DIRECTION('',(1.,0.,0.)); +#137568 = ORIENTED_EDGE('',*,*,#137569,.T.); +#137569 = EDGE_CURVE('',#137562,#137570,#137572,.T.); +#137570 = VERTEX_POINT('',#137571); +#137571 = CARTESIAN_POINT('',(188.66165,-118.9131,1.585)); +#137572 = CIRCLE('',#137573,5.999932016264E-02); +#137573 = AXIS2_PLACEMENT_3D('',#137574,#137575,#137576); +#137574 = CARTESIAN_POINT('',(188.60165067984,-118.9130993201,1.585)); +#137575 = DIRECTION('',(0.,0.,-1.)); +#137576 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#137577 = ORIENTED_EDGE('',*,*,#137578,.T.); +#137578 = EDGE_CURVE('',#137570,#137579,#137581,.T.); +#137579 = VERTEX_POINT('',#137580); +#137580 = CARTESIAN_POINT('',(188.66165,-121.2631,1.585)); +#137581 = LINE('',#137582,#137583); +#137582 = CARTESIAN_POINT('',(188.66165,-118.9131,1.585)); +#137583 = VECTOR('',#137584,1.); +#137584 = DIRECTION('',(0.,-1.,0.)); +#137585 = ORIENTED_EDGE('',*,*,#137586,.T.); +#137586 = EDGE_CURVE('',#137579,#137587,#137589,.T.); +#137587 = VERTEX_POINT('',#137588); +#137588 = CARTESIAN_POINT('',(188.54165,-121.2631,1.585)); +#137589 = CIRCLE('',#137590,6.000000000042E-02); +#137590 = AXIS2_PLACEMENT_3D('',#137591,#137592,#137593); +#137591 = CARTESIAN_POINT('',(188.60165,-121.2631002255,1.585)); +#137592 = DIRECTION('',(0.,0.,-1.)); +#137593 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#137594 = ORIENTED_EDGE('',*,*,#137595,.T.); +#137595 = EDGE_CURVE('',#137587,#137596,#137598,.T.); +#137596 = VERTEX_POINT('',#137597); +#137597 = CARTESIAN_POINT('',(188.54165,-118.9731,1.585)); +#137598 = LINE('',#137599,#137600); +#137599 = CARTESIAN_POINT('',(188.54165,-121.2631,1.585)); +#137600 = VECTOR('',#137601,1.); +#137601 = DIRECTION('',(0.,1.,0.)); +#137602 = ORIENTED_EDGE('',*,*,#137603,.T.); +#137603 = EDGE_CURVE('',#137596,#137604,#137606,.T.); +#137604 = VERTEX_POINT('',#137605); +#137605 = CARTESIAN_POINT('',(182.87094,-118.9731,1.585)); +#137606 = LINE('',#137607,#137608); +#137607 = CARTESIAN_POINT('',(188.54165,-118.9731,1.585)); +#137608 = VECTOR('',#137609,1.); +#137609 = DIRECTION('',(-1.,0.,0.)); +#137610 = ORIENTED_EDGE('',*,*,#137611,.T.); +#137611 = EDGE_CURVE('',#137604,#137612,#137614,.T.); +#137612 = VERTEX_POINT('',#137613); +#137613 = CARTESIAN_POINT('',(181.84165,-120.002389,1.585)); +#137614 = LINE('',#137615,#137616); +#137615 = CARTESIAN_POINT('',(182.87094,-118.9731,1.585)); +#137616 = VECTOR('',#137617,1.); +#137617 = DIRECTION('',(-0.707107124679,-0.707106437694,0.)); +#137618 = ORIENTED_EDGE('',*,*,#137619,.T.); +#137619 = EDGE_CURVE('',#137612,#137620,#137622,.T.); +#137620 = VERTEX_POINT('',#137621); +#137621 = CARTESIAN_POINT('',(181.84165,-121.2631,1.585)); +#137622 = LINE('',#137623,#137624); +#137623 = CARTESIAN_POINT('',(181.84165,-120.002389,1.585)); +#137624 = VECTOR('',#137625,1.); +#137625 = DIRECTION('',(0.,-1.,0.)); +#137626 = ORIENTED_EDGE('',*,*,#137627,.T.); +#137627 = EDGE_CURVE('',#137620,#137628,#137630,.T.); +#137628 = VERTEX_POINT('',#137629); +#137629 = CARTESIAN_POINT('',(181.72165,-121.2631,1.585)); +#137630 = CIRCLE('',#137631,6.000000000041E-02); +#137631 = AXIS2_PLACEMENT_3D('',#137632,#137633,#137634); +#137632 = CARTESIAN_POINT('',(181.78165,-121.2631002255,1.585)); +#137633 = DIRECTION('',(0.,0.,-1.)); +#137634 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#137635 = ORIENTED_EDGE('',*,*,#137636,.T.); +#137636 = EDGE_CURVE('',#137628,#137637,#137639,.T.); +#137637 = VERTEX_POINT('',#137638); +#137638 = CARTESIAN_POINT('',(181.72165,-119.977537,1.585)); +#137639 = LINE('',#137640,#137641); +#137640 = CARTESIAN_POINT('',(181.72165,-121.2631,1.585)); +#137641 = VECTOR('',#137642,1.); +#137642 = DIRECTION('',(0.,1.,0.)); +#137643 = ORIENTED_EDGE('',*,*,#137644,.T.); +#137644 = EDGE_CURVE('',#137637,#137645,#137647,.T.); +#137645 = VERTEX_POINT('',#137646); +#137646 = CARTESIAN_POINT('',(181.726217,-119.954576,1.585)); +#137647 = LINE('',#137648,#137649); +#137648 = CARTESIAN_POINT('',(181.72165,-119.977537,1.585)); +#137649 = VECTOR('',#137650,1.); +#137650 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#137651 = ORIENTED_EDGE('',*,*,#137652,.T.); +#137652 = EDGE_CURVE('',#137645,#137653,#137655,.T.); +#137653 = VERTEX_POINT('',#137654); +#137654 = CARTESIAN_POINT('',(181.739224,-119.935111,1.585)); +#137655 = LINE('',#137656,#137657); +#137656 = CARTESIAN_POINT('',(181.726217,-119.954576,1.585)); +#137657 = VECTOR('',#137658,1.); +#137658 = DIRECTION('',(0.555596893535,0.831451797697,0.)); +#137659 = ORIENTED_EDGE('',*,*,#137660,.T.); +#137660 = EDGE_CURVE('',#137653,#137661,#137663,.T.); +#137661 = VERTEX_POINT('',#137662); +#137662 = CARTESIAN_POINT('',(182.80366,-118.870674,1.585)); +#137663 = LINE('',#137664,#137665); +#137664 = CARTESIAN_POINT('',(181.739224,-119.935111,1.585)); +#137665 = VECTOR('',#137666,1.); +#137666 = DIRECTION('',(0.707106449036,0.707107113337,0.)); +#137667 = ORIENTED_EDGE('',*,*,#137668,.T.); +#137668 = EDGE_CURVE('',#137661,#137552,#137669,.T.); +#137669 = LINE('',#137670,#137671); +#137670 = CARTESIAN_POINT('',(182.80366,-118.870674,1.585)); +#137671 = VECTOR('',#137672,1.); +#137672 = DIRECTION('',(0.831464982668,0.555577161695,0.)); +#137673 = PLANE('',#137674); +#137674 = AXIS2_PLACEMENT_3D('',#137675,#137676,#137677); +#137675 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137676 = DIRECTION('',(0.,0.,1.)); +#137677 = DIRECTION('',(1.,0.,-0.)); +#137678 = SHELL_BASED_SURFACE_MODEL('',(#137679)); +#137679 = OPEN_SHELL('',(#137680)); +#137680 = ADVANCED_FACE('',(#137681),#137791,.T.); +#137681 = FACE_BOUND('',#137682,.F.); +#137682 = EDGE_LOOP('',(#137683,#137694,#137702,#137710,#137719,#137727, + #137735,#137744,#137752,#137760,#137769,#137777,#137785)); +#137683 = ORIENTED_EDGE('',*,*,#137684,.T.); +#137684 = EDGE_CURVE('',#137685,#137687,#137689,.T.); +#137685 = VERTEX_POINT('',#137686); +#137686 = CARTESIAN_POINT('',(181.092467,-120.058889,1.585)); +#137687 = VERTEX_POINT('',#137688); +#137688 = CARTESIAN_POINT('',(181.2079,-120.08185,1.585)); +#137689 = CIRCLE('',#137690,6.000007318647E-02); +#137690 = AXIS2_PLACEMENT_3D('',#137691,#137692,#137693); +#137691 = CARTESIAN_POINT('',(181.14789992681,-120.0818498233,1.585)); +#137692 = DIRECTION('',(0.,0.,-1.)); +#137693 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#137694 = ORIENTED_EDGE('',*,*,#137695,.T.); +#137695 = EDGE_CURVE('',#137687,#137696,#137698,.T.); +#137696 = VERTEX_POINT('',#137697); +#137697 = CARTESIAN_POINT('',(181.2079,-120.4156,1.585)); +#137698 = LINE('',#137699,#137700); +#137699 = CARTESIAN_POINT('',(181.2079,-120.08185,1.585)); +#137700 = VECTOR('',#137701,1.); +#137701 = DIRECTION('',(0.,-1.,0.)); +#137702 = ORIENTED_EDGE('',*,*,#137703,.T.); +#137703 = EDGE_CURVE('',#137696,#137704,#137706,.T.); +#137704 = VERTEX_POINT('',#137705); +#137705 = CARTESIAN_POINT('',(181.54165,-120.4156,1.585)); +#137706 = LINE('',#137707,#137708); +#137707 = CARTESIAN_POINT('',(181.2079,-120.4156,1.585)); +#137708 = VECTOR('',#137709,1.); +#137709 = DIRECTION('',(1.,0.,0.)); +#137710 = ORIENTED_EDGE('',*,*,#137711,.T.); +#137711 = EDGE_CURVE('',#137704,#137712,#137714,.T.); +#137712 = VERTEX_POINT('',#137713); +#137713 = CARTESIAN_POINT('',(181.54165,-120.5356,1.585)); +#137714 = CIRCLE('',#137715,6.000000000043E-02); +#137715 = AXIS2_PLACEMENT_3D('',#137716,#137717,#137718); +#137716 = CARTESIAN_POINT('',(181.54165022558,-120.4756,1.585)); +#137717 = DIRECTION('',(0.,0.,-1.)); +#137718 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#137719 = ORIENTED_EDGE('',*,*,#137720,.T.); +#137720 = EDGE_CURVE('',#137712,#137721,#137723,.T.); +#137721 = VERTEX_POINT('',#137722); +#137722 = CARTESIAN_POINT('',(181.2079,-120.5356,1.585)); +#137723 = LINE('',#137724,#137725); +#137724 = CARTESIAN_POINT('',(181.54165,-120.5356,1.585)); +#137725 = VECTOR('',#137726,1.); +#137726 = DIRECTION('',(-1.,0.,0.)); +#137727 = ORIENTED_EDGE('',*,*,#137728,.T.); +#137728 = EDGE_CURVE('',#137721,#137729,#137731,.T.); +#137729 = VERTEX_POINT('',#137730); +#137730 = CARTESIAN_POINT('',(181.2079,-120.86935,1.585)); +#137731 = LINE('',#137732,#137733); +#137732 = CARTESIAN_POINT('',(181.2079,-120.5356,1.585)); +#137733 = VECTOR('',#137734,1.); +#137734 = DIRECTION('',(0.,-1.,0.)); +#137735 = ORIENTED_EDGE('',*,*,#137736,.T.); +#137736 = EDGE_CURVE('',#137729,#137737,#137739,.T.); +#137737 = VERTEX_POINT('',#137738); +#137738 = CARTESIAN_POINT('',(181.0879,-120.86935,1.585)); +#137739 = CIRCLE('',#137740,6.000000000043E-02); +#137740 = AXIS2_PLACEMENT_3D('',#137741,#137742,#137743); +#137741 = CARTESIAN_POINT('',(181.1479,-120.8693502255,1.585)); +#137742 = DIRECTION('',(0.,0.,-1.)); +#137743 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#137744 = ORIENTED_EDGE('',*,*,#137745,.T.); +#137745 = EDGE_CURVE('',#137737,#137746,#137748,.T.); +#137746 = VERTEX_POINT('',#137747); +#137747 = CARTESIAN_POINT('',(181.0879,-120.5356,1.585)); +#137748 = LINE('',#137749,#137750); +#137749 = CARTESIAN_POINT('',(181.0879,-120.86935,1.585)); +#137750 = VECTOR('',#137751,1.); +#137751 = DIRECTION('',(0.,1.,0.)); +#137752 = ORIENTED_EDGE('',*,*,#137753,.T.); +#137753 = EDGE_CURVE('',#137746,#137754,#137756,.T.); +#137754 = VERTEX_POINT('',#137755); +#137755 = CARTESIAN_POINT('',(180.75415,-120.5356,1.585)); +#137756 = LINE('',#137757,#137758); +#137757 = CARTESIAN_POINT('',(181.0879,-120.5356,1.585)); +#137758 = VECTOR('',#137759,1.); +#137759 = DIRECTION('',(-1.,0.,0.)); +#137760 = ORIENTED_EDGE('',*,*,#137761,.T.); +#137761 = EDGE_CURVE('',#137754,#137762,#137764,.T.); +#137762 = VERTEX_POINT('',#137763); +#137763 = CARTESIAN_POINT('',(180.75415,-120.4156,1.585)); +#137764 = CIRCLE('',#137765,6.000000000042E-02); +#137765 = AXIS2_PLACEMENT_3D('',#137766,#137767,#137768); +#137766 = CARTESIAN_POINT('',(180.75414977441,-120.4756,1.585)); +#137767 = DIRECTION('',(0.,0.,-1.)); +#137768 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#137769 = ORIENTED_EDGE('',*,*,#137770,.T.); +#137770 = EDGE_CURVE('',#137762,#137771,#137773,.T.); +#137771 = VERTEX_POINT('',#137772); +#137772 = CARTESIAN_POINT('',(181.0879,-120.4156,1.585)); +#137773 = LINE('',#137774,#137775); +#137774 = CARTESIAN_POINT('',(180.75415,-120.4156,1.585)); +#137775 = VECTOR('',#137776,1.); +#137776 = DIRECTION('',(1.,0.,0.)); +#137777 = ORIENTED_EDGE('',*,*,#137778,.T.); +#137778 = EDGE_CURVE('',#137771,#137779,#137781,.T.); +#137779 = VERTEX_POINT('',#137780); +#137780 = CARTESIAN_POINT('',(181.0879,-120.08185,1.585)); +#137781 = LINE('',#137782,#137783); +#137782 = CARTESIAN_POINT('',(181.0879,-120.4156,1.585)); +#137783 = VECTOR('',#137784,1.); +#137784 = DIRECTION('',(0.,1.,0.)); +#137785 = ORIENTED_EDGE('',*,*,#137786,.T.); +#137786 = EDGE_CURVE('',#137779,#137685,#137787,.T.); +#137787 = LINE('',#137788,#137789); +#137788 = CARTESIAN_POINT('',(181.0879,-120.08185,1.585)); +#137789 = VECTOR('',#137790,1.); +#137790 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#137791 = PLANE('',#137792); +#137792 = AXIS2_PLACEMENT_3D('',#137793,#137794,#137795); +#137793 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137794 = DIRECTION('',(0.,0.,1.)); +#137795 = DIRECTION('',(1.,0.,-0.)); +#137796 = SHELL_BASED_SURFACE_MODEL('',(#137797)); +#137797 = OPEN_SHELL('',(#137798)); +#137798 = ADVANCED_FACE('',(#137799),#137919,.T.); +#137799 = FACE_BOUND('',#137800,.F.); +#137800 = EDGE_LOOP('',(#137801,#137812,#137820,#137829,#137837,#137846, + #137854,#137863,#137871,#137880,#137888,#137897,#137905,#137913)); +#137801 = ORIENTED_EDGE('',*,*,#137802,.T.); +#137802 = EDGE_CURVE('',#137803,#137805,#137807,.T.); +#137803 = VERTEX_POINT('',#137804); +#137804 = CARTESIAN_POINT('',(123.396427,-119.542459,1.585)); +#137805 = VERTEX_POINT('',#137806); +#137806 = CARTESIAN_POINT('',(123.513095,-119.604819,1.585)); +#137807 = CIRCLE('',#137808,7.500000000003E-02); +#137808 = AXIS2_PLACEMENT_3D('',#137809,#137810,#137811); +#137809 = CARTESIAN_POINT('',(123.438095,-119.6048190655,1.585)); +#137810 = DIRECTION('',(0.,0.,-1.)); +#137811 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#137812 = ORIENTED_EDGE('',*,*,#137813,.T.); +#137813 = EDGE_CURVE('',#137805,#137814,#137816,.T.); +#137814 = VERTEX_POINT('',#137815); +#137815 = CARTESIAN_POINT('',(123.513095,-120.396637,1.585)); +#137816 = LINE('',#137817,#137818); +#137817 = CARTESIAN_POINT('',(123.513095,-119.604819,1.585)); +#137818 = VECTOR('',#137819,1.); +#137819 = DIRECTION('',(0.,-1.,0.)); +#137820 = ORIENTED_EDGE('',*,*,#137821,.T.); +#137821 = EDGE_CURVE('',#137814,#137822,#137824,.T.); +#137822 = VERTEX_POINT('',#137823); +#137823 = CARTESIAN_POINT('',(123.646276,-120.529819,1.585)); +#137824 = CIRCLE('',#137825,0.186867373533); +#137825 = AXIS2_PLACEMENT_3D('',#137826,#137827,#137828); +#137826 = CARTESIAN_POINT('',(123.69381471388,-120.349099643,1.585)); +#137827 = DIRECTION('',(0.,0.,1.)); +#137828 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#137829 = ORIENTED_EDGE('',*,*,#137830,.T.); +#137830 = EDGE_CURVE('',#137822,#137831,#137833,.T.); +#137831 = VERTEX_POINT('',#137832); +#137832 = CARTESIAN_POINT('',(123.801342,-120.529819,1.585)); +#137833 = LINE('',#137834,#137835); +#137834 = CARTESIAN_POINT('',(123.646276,-120.529819,1.585)); +#137835 = VECTOR('',#137836,1.); +#137836 = DIRECTION('',(1.,0.,0.)); +#137837 = ORIENTED_EDGE('',*,*,#137838,.T.); +#137838 = EDGE_CURVE('',#137831,#137839,#137841,.T.); +#137839 = VERTEX_POINT('',#137840); +#137840 = CARTESIAN_POINT('',(123.934523,-120.396637,1.585)); +#137841 = CIRCLE('',#137842,0.186867760544); +#137842 = AXIS2_PLACEMENT_3D('',#137843,#137844,#137845); +#137843 = CARTESIAN_POINT('',(123.75380296928,-120.3490993262,1.585)); +#137844 = DIRECTION('',(0.,0.,1.)); +#137845 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#137846 = ORIENTED_EDGE('',*,*,#137847,.T.); +#137847 = EDGE_CURVE('',#137839,#137848,#137850,.T.); +#137848 = VERTEX_POINT('',#137849); +#137849 = CARTESIAN_POINT('',(123.935964,-119.590187,1.585)); +#137850 = LINE('',#137851,#137852); +#137851 = CARTESIAN_POINT('',(123.934523,-120.396637,1.585)); +#137852 = VECTOR('',#137853,1.); +#137853 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#137854 = ORIENTED_EDGE('',*,*,#137855,.T.); +#137855 = EDGE_CURVE('',#137848,#137856,#137858,.T.); +#137856 = VERTEX_POINT('',#137857); +#137857 = CARTESIAN_POINT('',(124.084523,-119.604819,1.585)); +#137858 = CIRCLE('',#137859,7.500006711463E-02); +#137859 = AXIS2_PLACEMENT_3D('',#137860,#137861,#137862); +#137860 = CARTESIAN_POINT('',(124.00952293288,-119.6048189328,1.585)); +#137861 = DIRECTION('',(0.,0.,-1.)); +#137862 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#137863 = ORIENTED_EDGE('',*,*,#137864,.T.); +#137864 = EDGE_CURVE('',#137856,#137865,#137867,.T.); +#137865 = VERTEX_POINT('',#137866); +#137866 = CARTESIAN_POINT('',(124.08186,-120.434152,1.585)); +#137867 = LINE('',#137868,#137869); +#137868 = CARTESIAN_POINT('',(124.084523,-119.604819,1.585)); +#137869 = VECTOR('',#137870,1.); +#137870 = DIRECTION('',(-3.210997598703E-03,-0.999994844734,0.)); +#137871 = ORIENTED_EDGE('',*,*,#137872,.T.); +#137872 = EDGE_CURVE('',#137865,#137873,#137875,.T.); +#137873 = VERTEX_POINT('',#137874); +#137874 = CARTESIAN_POINT('',(123.833679,-120.678378,1.585)); +#137875 = CIRCLE('',#137876,0.348635327447); +#137876 = AXIS2_PLACEMENT_3D('',#137877,#137878,#137879); +#137877 = CARTESIAN_POINT('',(123.74590748129,-120.3409720841,1.585)); +#137878 = DIRECTION('',(0.,0.,-1.)); +#137879 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#137880 = ORIENTED_EDGE('',*,*,#137881,.T.); +#137881 = EDGE_CURVE('',#137873,#137882,#137884,.T.); +#137882 = VERTEX_POINT('',#137883); +#137883 = CARTESIAN_POINT('',(123.608761,-120.677156,1.585)); +#137884 = LINE('',#137885,#137886); +#137885 = CARTESIAN_POINT('',(123.833679,-120.678378,1.585)); +#137886 = VECTOR('',#137887,1.); +#137887 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#137888 = ORIENTED_EDGE('',*,*,#137889,.T.); +#137889 = EDGE_CURVE('',#137882,#137890,#137892,.T.); +#137890 = VERTEX_POINT('',#137891); +#137891 = CARTESIAN_POINT('',(123.364536,-120.428974,1.585)); +#137892 = CIRCLE('',#137893,0.348628446662); +#137893 = AXIS2_PLACEMENT_3D('',#137894,#137895,#137896); +#137894 = CARTESIAN_POINT('',(123.70193661322,-120.3412094284,1.585)); +#137895 = DIRECTION('',(0.,0.,-1.)); +#137896 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#137897 = ORIENTED_EDGE('',*,*,#137898,.T.); +#137898 = EDGE_CURVE('',#137890,#137899,#137901,.T.); +#137899 = VERTEX_POINT('',#137900); +#137900 = CARTESIAN_POINT('',(123.364536,-119.590187,1.585)); +#137901 = LINE('',#137902,#137903); +#137902 = CARTESIAN_POINT('',(123.364536,-120.428974,1.585)); +#137903 = VECTOR('',#137904,1.); +#137904 = DIRECTION('',(0.,1.,0.)); +#137905 = ORIENTED_EDGE('',*,*,#137906,.T.); +#137906 = EDGE_CURVE('',#137899,#137907,#137909,.T.); +#137907 = VERTEX_POINT('',#137908); +#137908 = CARTESIAN_POINT('',(123.375735,-119.563151,1.585)); +#137909 = LINE('',#137910,#137911); +#137910 = CARTESIAN_POINT('',(123.364536,-119.590187,1.585)); +#137911 = VECTOR('',#137912,1.); +#137912 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#137913 = ORIENTED_EDGE('',*,*,#137914,.T.); +#137914 = EDGE_CURVE('',#137907,#137803,#137915,.T.); +#137915 = LINE('',#137916,#137917); +#137916 = CARTESIAN_POINT('',(123.375735,-119.563151,1.585)); +#137917 = VECTOR('',#137918,1.); +#137918 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#137919 = PLANE('',#137920); +#137920 = AXIS2_PLACEMENT_3D('',#137921,#137922,#137923); +#137921 = CARTESIAN_POINT('',(0.,0.,1.585)); +#137922 = DIRECTION('',(0.,0.,1.)); +#137923 = DIRECTION('',(1.,0.,-0.)); +#137924 = SHELL_BASED_SURFACE_MODEL('',(#137925)); +#137925 = OPEN_SHELL('',(#137926)); +#137926 = ADVANCED_FACE('',(#137927),#138113,.T.); +#137927 = FACE_BOUND('',#137928,.F.); +#137928 = EDGE_LOOP('',(#137929,#137940,#137948,#137957,#137965,#137973, + #137982,#137990,#137999,#138007,#138015,#138023,#138032,#138040, + #138049,#138057,#138066,#138074,#138082,#138090,#138099,#138107)); +#137929 = ORIENTED_EDGE('',*,*,#137930,.T.); +#137930 = EDGE_CURVE('',#137931,#137933,#137935,.T.); +#137931 = VERTEX_POINT('',#137932); +#137932 = CARTESIAN_POINT('',(124.375844,-119.678378,1.585)); +#137933 = VERTEX_POINT('',#137934); +#137934 = CARTESIAN_POINT('',(124.390476,-119.529819,1.585)); +#137935 = CIRCLE('',#137936,7.500006711464E-02); +#137936 = AXIS2_PLACEMENT_3D('',#137937,#137938,#137939); +#137937 = CARTESIAN_POINT('',(124.39047593288,-119.6048190671,1.585)); +#137938 = DIRECTION('',(0.,0.,-1.)); +#137939 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#137940 = ORIENTED_EDGE('',*,*,#137941,.T.); +#137941 = EDGE_CURVE('',#137933,#137942,#137944,.T.); +#137942 = VERTEX_POINT('',#137943); +#137943 = CARTESIAN_POINT('',(125.017261,-119.530581,1.585)); +#137944 = LINE('',#137945,#137946); +#137945 = CARTESIAN_POINT('',(124.390476,-119.529819,1.585)); +#137946 = VECTOR('',#137947,1.); +#137947 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#137948 = ORIENTED_EDGE('',*,*,#137949,.T.); +#137949 = EDGE_CURVE('',#137942,#137950,#137952,.T.); +#137950 = VERTEX_POINT('',#137951); +#137951 = CARTESIAN_POINT('',(125.083082,-119.619451,1.585)); +#137952 = CIRCLE('',#137953,7.447391611627E-02); +#137953 = AXIS2_PLACEMENT_3D('',#137954,#137955,#137956); +#137954 = CARTESIAN_POINT('',(125.01008192664,-119.6047080874,1.585)); +#137955 = DIRECTION('',(0.,0.,-1.)); +#137956 = DIRECTION('',(9.639715124831E-02,0.995342950561,0.)); +#137957 = ORIENTED_EDGE('',*,*,#137958,.T.); +#137958 = EDGE_CURVE('',#137950,#137959,#137961,.T.); +#137959 = VERTEX_POINT('',#137960); +#137960 = CARTESIAN_POINT('',(125.065966,-119.654207,1.585)); +#137961 = LINE('',#137962,#137963); +#137962 = CARTESIAN_POINT('',(125.083082,-119.619451,1.585)); +#137963 = VECTOR('',#137964,1.); +#137964 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#137965 = ORIENTED_EDGE('',*,*,#137966,.T.); +#137966 = EDGE_CURVE('',#137959,#137967,#137969,.T.); +#137967 = VERTEX_POINT('',#137968); +#137968 = CARTESIAN_POINT('',(124.83907,-119.913516,1.585)); +#137969 = LINE('',#137970,#137971); +#137970 = CARTESIAN_POINT('',(125.065966,-119.654207,1.585)); +#137971 = VECTOR('',#137972,1.); +#137972 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#137973 = ORIENTED_EDGE('',*,*,#137974,.T.); +#137974 = EDGE_CURVE('',#137967,#137975,#137977,.T.); +#137975 = VERTEX_POINT('',#137976); +#137976 = CARTESIAN_POINT('',(125.083082,-120.161615,1.585)); +#137977 = CIRCLE('',#137978,0.348520834816); +#137978 = AXIS2_PLACEMENT_3D('',#137979,#137980,#137981); +#137979 = CARTESIAN_POINT('',(124.7457766174,-120.2493181993,1.585)); +#137980 = DIRECTION('',(0.,0.,-1.)); +#137981 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#137982 = ORIENTED_EDGE('',*,*,#137983,.T.); +#137983 = EDGE_CURVE('',#137975,#137984,#137986,.T.); +#137984 = VERTEX_POINT('',#137985); +#137985 = CARTESIAN_POINT('',(125.08186,-120.434152,1.585)); +#137986 = LINE('',#137987,#137988); +#137987 = CARTESIAN_POINT('',(125.083082,-120.161615,1.585)); +#137988 = VECTOR('',#137989,1.); +#137989 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#137990 = ORIENTED_EDGE('',*,*,#137991,.T.); +#137991 = EDGE_CURVE('',#137984,#137992,#137994,.T.); +#137992 = VERTEX_POINT('',#137993); +#137993 = CARTESIAN_POINT('',(124.833679,-120.678378,1.585)); +#137994 = CIRCLE('',#137995,0.348635327447); +#137995 = AXIS2_PLACEMENT_3D('',#137996,#137997,#137998); +#137996 = CARTESIAN_POINT('',(124.74590748129,-120.3409720841,1.585)); +#137997 = DIRECTION('',(0.,0.,-1.)); +#137998 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#137999 = ORIENTED_EDGE('',*,*,#138000,.T.); +#138000 = EDGE_CURVE('',#137992,#138001,#138003,.T.); +#138001 = VERTEX_POINT('',#138002); +#138002 = CARTESIAN_POINT('',(124.513523,-120.677156,1.585)); +#138003 = LINE('',#138004,#138005); +#138004 = CARTESIAN_POINT('',(124.833679,-120.678378,1.585)); +#138005 = VECTOR('',#138006,1.); +#138006 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#138007 = ORIENTED_EDGE('',*,*,#138008,.T.); +#138008 = EDGE_CURVE('',#138001,#138009,#138011,.T.); +#138009 = VERTEX_POINT('',#138010); +#138010 = CARTESIAN_POINT('',(124.39081,-120.61495,1.585)); +#138011 = LINE('',#138012,#138013); +#138012 = CARTESIAN_POINT('',(124.513523,-120.677156,1.585)); +#138013 = VECTOR('',#138014,1.); +#138014 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#138015 = ORIENTED_EDGE('',*,*,#138016,.T.); +#138016 = EDGE_CURVE('',#138009,#138017,#138019,.T.); +#138017 = VERTEX_POINT('',#138018); +#138018 = CARTESIAN_POINT('',(124.328115,-120.551247,1.585)); +#138019 = LINE('',#138020,#138021); +#138020 = CARTESIAN_POINT('',(124.39081,-120.61495,1.585)); +#138021 = VECTOR('',#138022,1.); +#138022 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#138023 = ORIENTED_EDGE('',*,*,#138024,.T.); +#138024 = EDGE_CURVE('',#138017,#138025,#138027,.T.); +#138025 = VERTEX_POINT('',#138026); +#138026 = CARTESIAN_POINT('',(124.44351,-120.456548,1.585)); +#138027 = CIRCLE('',#138028,7.50001266804E-02); +#138028 = AXIS2_PLACEMENT_3D('',#138029,#138030,#138031); +#138029 = CARTESIAN_POINT('',(124.39047605199,-120.5095802483,1.585)); +#138030 = DIRECTION('',(0.,0.,-1.)); +#138031 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#138032 = ORIENTED_EDGE('',*,*,#138033,.T.); +#138033 = EDGE_CURVE('',#138025,#138034,#138036,.T.); +#138034 = VERTEX_POINT('',#138035); +#138035 = CARTESIAN_POINT('',(124.482522,-120.495561,1.585)); +#138036 = LINE('',#138037,#138038); +#138037 = CARTESIAN_POINT('',(124.44351,-120.456548,1.585)); +#138038 = VECTOR('',#138039,1.); +#138039 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#138040 = ORIENTED_EDGE('',*,*,#138041,.T.); +#138041 = EDGE_CURVE('',#138034,#138042,#138044,.T.); +#138042 = VERTEX_POINT('',#138043); +#138043 = CARTESIAN_POINT('',(124.869857,-120.495561,1.585)); +#138044 = CIRCLE('',#138045,0.358502380266); +#138045 = AXIS2_PLACEMENT_3D('',#138046,#138047,#138048); +#138046 = CARTESIAN_POINT('',(124.6761895,-120.193871,1.585)); +#138047 = DIRECTION('',(0.,0.,1.)); +#138048 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#138049 = ORIENTED_EDGE('',*,*,#138050,.T.); +#138050 = EDGE_CURVE('',#138042,#138051,#138053,.T.); +#138051 = VERTEX_POINT('',#138052); +#138052 = CARTESIAN_POINT('',(124.900264,-120.465153,1.585)); +#138053 = LINE('',#138054,#138055); +#138054 = CARTESIAN_POINT('',(124.869857,-120.495561,1.585)); +#138055 = VECTOR('',#138056,1.); +#138056 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#138057 = ORIENTED_EDGE('',*,*,#138058,.T.); +#138058 = EDGE_CURVE('',#138051,#138059,#138061,.T.); +#138059 = VERTEX_POINT('',#138060); +#138060 = CARTESIAN_POINT('',(124.900265,-120.125436,1.585)); +#138061 = CIRCLE('',#138062,0.305616146029); +#138062 = AXIS2_PLACEMENT_3D('',#138063,#138064,#138065); +#138063 = CARTESIAN_POINT('',(124.64619892049,-120.2952937521,1.585)); +#138064 = DIRECTION('',(0.,-0.,1.)); +#138065 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#138066 = ORIENTED_EDGE('',*,*,#138067,.T.); +#138067 = EDGE_CURVE('',#138059,#138068,#138070,.T.); +#138068 = VERTEX_POINT('',#138069); +#138069 = CARTESIAN_POINT('',(124.869858,-120.095029,1.585)); +#138070 = LINE('',#138071,#138072); +#138071 = CARTESIAN_POINT('',(124.900265,-120.125436,1.585)); +#138072 = VECTOR('',#138073,1.); +#138073 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#138074 = ORIENTED_EDGE('',*,*,#138075,.T.); +#138075 = EDGE_CURVE('',#138068,#138076,#138078,.T.); +#138076 = VERTEX_POINT('',#138077); +#138077 = CARTESIAN_POINT('',(124.801342,-120.060771,1.585)); +#138078 = LINE('',#138079,#138080); +#138079 = CARTESIAN_POINT('',(124.869858,-120.095029,1.585)); +#138080 = VECTOR('',#138081,1.); +#138081 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#138082 = ORIENTED_EDGE('',*,*,#138083,.T.); +#138083 = EDGE_CURVE('',#138076,#138084,#138086,.T.); +#138084 = VERTEX_POINT('',#138085); +#138085 = CARTESIAN_POINT('',(124.661558,-120.05933,1.585)); +#138086 = LINE('',#138087,#138088); +#138087 = CARTESIAN_POINT('',(124.801342,-120.060771,1.585)); +#138088 = VECTOR('',#138089,1.); +#138089 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#138090 = ORIENTED_EDGE('',*,*,#138091,.T.); +#138091 = EDGE_CURVE('',#138084,#138092,#138094,.T.); +#138092 = VERTEX_POINT('',#138093); +#138093 = CARTESIAN_POINT('',(124.619747,-119.936383,1.585)); +#138094 = CIRCLE('',#138095,7.500015628755E-02); +#138095 = AXIS2_PLACEMENT_3D('',#138096,#138097,#138098); +#138096 = CARTESIAN_POINT('',(124.67619028432,-119.9857710461,1.585)); +#138097 = DIRECTION('',(0.,0.,-1.)); +#138098 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#138099 = ORIENTED_EDGE('',*,*,#138100,.T.); +#138100 = EDGE_CURVE('',#138092,#138101,#138103,.T.); +#138101 = VERTEX_POINT('',#138102); +#138102 = CARTESIAN_POINT('',(124.844241,-119.679819,1.585)); +#138103 = LINE('',#138104,#138105); +#138104 = CARTESIAN_POINT('',(124.619747,-119.936383,1.585)); +#138105 = VECTOR('',#138106,1.); +#138106 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#138107 = ORIENTED_EDGE('',*,*,#138108,.T.); +#138108 = EDGE_CURVE('',#138101,#137931,#138109,.T.); +#138109 = LINE('',#138110,#138111); +#138110 = CARTESIAN_POINT('',(124.844241,-119.679819,1.585)); +#138111 = VECTOR('',#138112,1.); +#138112 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#138113 = PLANE('',#138114); +#138114 = AXIS2_PLACEMENT_3D('',#138115,#138116,#138117); +#138115 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138116 = DIRECTION('',(0.,0.,1.)); +#138117 = DIRECTION('',(1.,0.,-0.)); +#138118 = SHELL_BASED_SURFACE_MODEL('',(#138119)); +#138119 = OPEN_SHELL('',(#138120)); +#138120 = ADVANCED_FACE('',(#138121),#138255,.T.); +#138121 = FACE_BOUND('',#138122,.F.); +#138122 = EDGE_LOOP('',(#138123,#138134,#138142,#138151,#138159,#138167, + #138175,#138183,#138192,#138200,#138208,#138216,#138225,#138233, + #138241,#138249)); +#138123 = ORIENTED_EDGE('',*,*,#138124,.T.); +#138124 = EDGE_CURVE('',#138125,#138127,#138129,.T.); +#138125 = VERTEX_POINT('',#138126); +#138126 = CARTESIAN_POINT('',(207.054801,-119.701216,1.585)); +#138127 = VERTEX_POINT('',#138128); +#138128 = CARTESIAN_POINT('',(207.171469,-119.763576,1.585)); +#138129 = CIRCLE('',#138130,7.500000000002E-02); +#138130 = AXIS2_PLACEMENT_3D('',#138131,#138132,#138133); +#138131 = CARTESIAN_POINT('',(207.096469,-119.7635760655,1.585)); +#138132 = DIRECTION('',(0.,0.,-1.)); +#138133 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#138134 = ORIENTED_EDGE('',*,*,#138135,.T.); +#138135 = EDGE_CURVE('',#138127,#138136,#138138,.T.); +#138136 = VERTEX_POINT('',#138137); +#138137 = CARTESIAN_POINT('',(207.170028,-120.349636,1.585)); +#138138 = LINE('',#138139,#138140); +#138139 = CARTESIAN_POINT('',(207.171469,-119.763576,1.585)); +#138140 = VECTOR('',#138141,1.); +#138141 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#138142 = ORIENTED_EDGE('',*,*,#138143,.T.); +#138143 = EDGE_CURVE('',#138136,#138144,#138146,.T.); +#138144 = VERTEX_POINT('',#138145); +#138145 = CARTESIAN_POINT('',(207.021469,-120.335004,1.585)); +#138146 = CIRCLE('',#138147,7.500006711464E-02); +#138147 = AXIS2_PLACEMENT_3D('',#138148,#138149,#138150); +#138148 = CARTESIAN_POINT('',(207.09646906711,-120.3350040671,1.585)); +#138149 = DIRECTION('',(-0.,0.,-1.)); +#138150 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#138151 = ORIENTED_EDGE('',*,*,#138152,.T.); +#138152 = EDGE_CURVE('',#138144,#138153,#138155,.T.); +#138153 = VERTEX_POINT('',#138154); +#138154 = CARTESIAN_POINT('',(207.021469,-120.12429,1.585)); +#138155 = LINE('',#138156,#138157); +#138156 = CARTESIAN_POINT('',(207.021469,-120.335004,1.585)); +#138157 = VECTOR('',#138158,1.); +#138158 = DIRECTION('',(0.,1.,0.)); +#138159 = ORIENTED_EDGE('',*,*,#138160,.T.); +#138160 = EDGE_CURVE('',#138153,#138161,#138163,.T.); +#138161 = VERTEX_POINT('',#138162); +#138162 = CARTESIAN_POINT('',(206.325154,-120.12429,1.585)); +#138163 = LINE('',#138164,#138165); +#138164 = CARTESIAN_POINT('',(207.021469,-120.12429,1.585)); +#138165 = VECTOR('',#138166,1.); +#138166 = DIRECTION('',(-1.,0.,0.)); +#138167 = ORIENTED_EDGE('',*,*,#138168,.T.); +#138168 = EDGE_CURVE('',#138161,#138169,#138171,.T.); +#138169 = VERTEX_POINT('',#138170); +#138170 = CARTESIAN_POINT('',(206.397683,-120.19993,1.585)); +#138171 = LINE('',#138172,#138173); +#138172 = CARTESIAN_POINT('',(206.325154,-120.12429,1.585)); +#138173 = VECTOR('',#138174,1.); +#138174 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#138175 = ORIENTED_EDGE('',*,*,#138176,.T.); +#138176 = EDGE_CURVE('',#138169,#138177,#138179,.T.); +#138177 = VERTEX_POINT('',#138178); +#138178 = CARTESIAN_POINT('',(206.45452,-120.315194,1.585)); +#138179 = LINE('',#138180,#138181); +#138180 = CARTESIAN_POINT('',(206.397683,-120.19993,1.585)); +#138181 = VECTOR('',#138182,1.); +#138182 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#138183 = ORIENTED_EDGE('',*,*,#138184,.T.); +#138184 = EDGE_CURVE('',#138177,#138185,#138187,.T.); +#138185 = VERTEX_POINT('',#138186); +#138186 = CARTESIAN_POINT('',(206.315101,-120.368545,1.585)); +#138187 = CIRCLE('',#138188,7.500029440469E-02); +#138188 = AXIS2_PLACEMENT_3D('',#138189,#138190,#138191); +#138189 = CARTESIAN_POINT('',(206.38218305397,-120.3350033513,1.585)); +#138190 = DIRECTION('',(0.,0.,-1.)); +#138191 = DIRECTION('',(0.964488827732,0.264123647521,0.)); +#138192 = ORIENTED_EDGE('',*,*,#138193,.T.); +#138193 = EDGE_CURVE('',#138185,#138194,#138196,.T.); +#138194 = VERTEX_POINT('',#138195); +#138195 = CARTESIAN_POINT('',(206.272925,-120.284193,1.585)); +#138196 = LINE('',#138197,#138198); +#138197 = CARTESIAN_POINT('',(206.315101,-120.368545,1.585)); +#138198 = VECTOR('',#138199,1.); +#138199 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#138200 = ORIENTED_EDGE('',*,*,#138201,.T.); +#138201 = EDGE_CURVE('',#138194,#138202,#138204,.T.); +#138202 = VERTEX_POINT('',#138203); +#138203 = CARTESIAN_POINT('',(206.191544,-120.202812,1.585)); +#138204 = LINE('',#138205,#138206); +#138205 = CARTESIAN_POINT('',(206.272925,-120.284193,1.585)); +#138206 = VECTOR('',#138207,1.); +#138207 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#138208 = ORIENTED_EDGE('',*,*,#138209,.T.); +#138209 = EDGE_CURVE('',#138202,#138210,#138212,.T.); +#138210 = VERTEX_POINT('',#138211); +#138211 = CARTESIAN_POINT('',(206.043491,-120.102378,1.585)); +#138212 = LINE('',#138213,#138214); +#138213 = CARTESIAN_POINT('',(206.191544,-120.202812,1.585)); +#138214 = VECTOR('',#138215,1.); +#138215 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#138216 = ORIENTED_EDGE('',*,*,#138217,.T.); +#138217 = EDGE_CURVE('',#138210,#138218,#138220,.T.); +#138218 = VERTEX_POINT('',#138219); +#138219 = CARTESIAN_POINT('',(206.096469,-119.97429,1.585)); +#138220 = CIRCLE('',#138221,7.49999375171E-02); +#138221 = AXIS2_PLACEMENT_3D('',#138222,#138223,#138224); +#138222 = CARTESIAN_POINT('',(206.09646880902,-120.0492899375,1.585)); +#138223 = DIRECTION('',(0.,0.,-1.)); +#138224 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#138225 = ORIENTED_EDGE('',*,*,#138226,.T.); +#138226 = EDGE_CURVE('',#138218,#138227,#138229,.T.); +#138227 = VERTEX_POINT('',#138228); +#138228 = CARTESIAN_POINT('',(207.021469,-119.97429,1.585)); +#138229 = LINE('',#138230,#138231); +#138230 = CARTESIAN_POINT('',(206.096469,-119.97429,1.585)); +#138231 = VECTOR('',#138232,1.); +#138232 = DIRECTION('',(1.,0.,0.)); +#138233 = ORIENTED_EDGE('',*,*,#138234,.T.); +#138234 = EDGE_CURVE('',#138227,#138235,#138237,.T.); +#138235 = VERTEX_POINT('',#138236); +#138236 = CARTESIAN_POINT('',(207.02291,-119.748944,1.585)); +#138237 = LINE('',#138238,#138239); +#138238 = CARTESIAN_POINT('',(207.021469,-119.97429,1.585)); +#138239 = VECTOR('',#138240,1.); +#138240 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#138241 = ORIENTED_EDGE('',*,*,#138242,.T.); +#138242 = EDGE_CURVE('',#138235,#138243,#138245,.T.); +#138243 = VERTEX_POINT('',#138244); +#138244 = CARTESIAN_POINT('',(207.034109,-119.721908,1.585)); +#138245 = LINE('',#138246,#138247); +#138246 = CARTESIAN_POINT('',(207.02291,-119.748944,1.585)); +#138247 = VECTOR('',#138248,1.); +#138248 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#138249 = ORIENTED_EDGE('',*,*,#138250,.T.); +#138250 = EDGE_CURVE('',#138243,#138125,#138251,.T.); +#138251 = LINE('',#138252,#138253); +#138252 = CARTESIAN_POINT('',(207.034109,-119.721908,1.585)); +#138253 = VECTOR('',#138254,1.); +#138254 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#138255 = PLANE('',#138256); +#138256 = AXIS2_PLACEMENT_3D('',#138257,#138258,#138259); +#138257 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138258 = DIRECTION('',(0.,0.,1.)); +#138259 = DIRECTION('',(1.,0.,-0.)); +#138260 = SHELL_BASED_SURFACE_MODEL('',(#138261)); +#138261 = OPEN_SHELL('',(#138262)); +#138262 = ADVANCED_FACE('',(#138263),#138383,.T.); +#138263 = FACE_BOUND('',#138264,.F.); +#138264 = EDGE_LOOP('',(#138265,#138276,#138284,#138293,#138301,#138310, + #138318,#138327,#138335,#138344,#138352,#138361,#138369,#138377)); +#138265 = ORIENTED_EDGE('',*,*,#138266,.T.); +#138266 = EDGE_CURVE('',#138267,#138269,#138271,.T.); +#138267 = VERTEX_POINT('',#138268); +#138268 = CARTESIAN_POINT('',(129.566427,-118.942459,1.585)); +#138269 = VERTEX_POINT('',#138270); +#138270 = CARTESIAN_POINT('',(129.683095,-119.004819,1.585)); +#138271 = CIRCLE('',#138272,7.500000000003E-02); +#138272 = AXIS2_PLACEMENT_3D('',#138273,#138274,#138275); +#138273 = CARTESIAN_POINT('',(129.608095,-119.0048190655,1.585)); +#138274 = DIRECTION('',(0.,0.,-1.)); +#138275 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#138276 = ORIENTED_EDGE('',*,*,#138277,.T.); +#138277 = EDGE_CURVE('',#138269,#138278,#138280,.T.); +#138278 = VERTEX_POINT('',#138279); +#138279 = CARTESIAN_POINT('',(129.683095,-119.796637,1.585)); +#138280 = LINE('',#138281,#138282); +#138281 = CARTESIAN_POINT('',(129.683095,-119.004819,1.585)); +#138282 = VECTOR('',#138283,1.); +#138283 = DIRECTION('',(0.,-1.,0.)); +#138284 = ORIENTED_EDGE('',*,*,#138285,.T.); +#138285 = EDGE_CURVE('',#138278,#138286,#138288,.T.); +#138286 = VERTEX_POINT('',#138287); +#138287 = CARTESIAN_POINT('',(129.816276,-119.929819,1.585)); +#138288 = CIRCLE('',#138289,0.186867373533); +#138289 = AXIS2_PLACEMENT_3D('',#138290,#138291,#138292); +#138290 = CARTESIAN_POINT('',(129.86381471388,-119.749099643,1.585)); +#138291 = DIRECTION('',(0.,0.,1.)); +#138292 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#138293 = ORIENTED_EDGE('',*,*,#138294,.T.); +#138294 = EDGE_CURVE('',#138286,#138295,#138297,.T.); +#138295 = VERTEX_POINT('',#138296); +#138296 = CARTESIAN_POINT('',(129.971342,-119.929819,1.585)); +#138297 = LINE('',#138298,#138299); +#138298 = CARTESIAN_POINT('',(129.816276,-119.929819,1.585)); +#138299 = VECTOR('',#138300,1.); +#138300 = DIRECTION('',(1.,0.,0.)); +#138301 = ORIENTED_EDGE('',*,*,#138302,.T.); +#138302 = EDGE_CURVE('',#138295,#138303,#138305,.T.); +#138303 = VERTEX_POINT('',#138304); +#138304 = CARTESIAN_POINT('',(130.104523,-119.796637,1.585)); +#138305 = CIRCLE('',#138306,0.186867760543); +#138306 = AXIS2_PLACEMENT_3D('',#138307,#138308,#138309); +#138307 = CARTESIAN_POINT('',(129.92380296928,-119.7490993262,1.585)); +#138308 = DIRECTION('',(0.,0.,1.)); +#138309 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#138310 = ORIENTED_EDGE('',*,*,#138311,.T.); +#138311 = EDGE_CURVE('',#138303,#138312,#138314,.T.); +#138312 = VERTEX_POINT('',#138313); +#138313 = CARTESIAN_POINT('',(130.105964,-118.990187,1.585)); +#138314 = LINE('',#138315,#138316); +#138315 = CARTESIAN_POINT('',(130.104523,-119.796637,1.585)); +#138316 = VECTOR('',#138317,1.); +#138317 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#138318 = ORIENTED_EDGE('',*,*,#138319,.T.); +#138319 = EDGE_CURVE('',#138312,#138320,#138322,.T.); +#138320 = VERTEX_POINT('',#138321); +#138321 = CARTESIAN_POINT('',(130.254523,-119.004819,1.585)); +#138322 = CIRCLE('',#138323,7.500006711464E-02); +#138323 = AXIS2_PLACEMENT_3D('',#138324,#138325,#138326); +#138324 = CARTESIAN_POINT('',(130.17952293288,-119.0048189328,1.585)); +#138325 = DIRECTION('',(0.,0.,-1.)); +#138326 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#138327 = ORIENTED_EDGE('',*,*,#138328,.T.); +#138328 = EDGE_CURVE('',#138320,#138329,#138331,.T.); +#138329 = VERTEX_POINT('',#138330); +#138330 = CARTESIAN_POINT('',(130.25186,-119.834152,1.585)); +#138331 = LINE('',#138332,#138333); +#138332 = CARTESIAN_POINT('',(130.254523,-119.004819,1.585)); +#138333 = VECTOR('',#138334,1.); +#138334 = DIRECTION('',(-3.21099759872E-03,-0.999994844734,0.)); +#138335 = ORIENTED_EDGE('',*,*,#138336,.T.); +#138336 = EDGE_CURVE('',#138329,#138337,#138339,.T.); +#138337 = VERTEX_POINT('',#138338); +#138338 = CARTESIAN_POINT('',(130.003679,-120.078378,1.585)); +#138339 = CIRCLE('',#138340,0.348635327447); +#138340 = AXIS2_PLACEMENT_3D('',#138341,#138342,#138343); +#138341 = CARTESIAN_POINT('',(129.91590748129,-119.7409720841,1.585)); +#138342 = DIRECTION('',(0.,0.,-1.)); +#138343 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#138344 = ORIENTED_EDGE('',*,*,#138345,.T.); +#138345 = EDGE_CURVE('',#138337,#138346,#138348,.T.); +#138346 = VERTEX_POINT('',#138347); +#138347 = CARTESIAN_POINT('',(129.778761,-120.077156,1.585)); +#138348 = LINE('',#138349,#138350); +#138349 = CARTESIAN_POINT('',(130.003679,-120.078378,1.585)); +#138350 = VECTOR('',#138351,1.); +#138351 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#138352 = ORIENTED_EDGE('',*,*,#138353,.T.); +#138353 = EDGE_CURVE('',#138346,#138354,#138356,.T.); +#138354 = VERTEX_POINT('',#138355); +#138355 = CARTESIAN_POINT('',(129.534536,-119.828974,1.585)); +#138356 = CIRCLE('',#138357,0.348628446662); +#138357 = AXIS2_PLACEMENT_3D('',#138358,#138359,#138360); +#138358 = CARTESIAN_POINT('',(129.87193661322,-119.7412094284,1.585)); +#138359 = DIRECTION('',(0.,0.,-1.)); +#138360 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#138361 = ORIENTED_EDGE('',*,*,#138362,.T.); +#138362 = EDGE_CURVE('',#138354,#138363,#138365,.T.); +#138363 = VERTEX_POINT('',#138364); +#138364 = CARTESIAN_POINT('',(129.534536,-118.990187,1.585)); +#138365 = LINE('',#138366,#138367); +#138366 = CARTESIAN_POINT('',(129.534536,-119.828974,1.585)); +#138367 = VECTOR('',#138368,1.); +#138368 = DIRECTION('',(0.,1.,0.)); +#138369 = ORIENTED_EDGE('',*,*,#138370,.T.); +#138370 = EDGE_CURVE('',#138363,#138371,#138373,.T.); +#138371 = VERTEX_POINT('',#138372); +#138372 = CARTESIAN_POINT('',(129.545735,-118.963151,1.585)); +#138373 = LINE('',#138374,#138375); +#138374 = CARTESIAN_POINT('',(129.534536,-118.990187,1.585)); +#138375 = VECTOR('',#138376,1.); +#138376 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#138377 = ORIENTED_EDGE('',*,*,#138378,.T.); +#138378 = EDGE_CURVE('',#138371,#138267,#138379,.T.); +#138379 = LINE('',#138380,#138381); +#138380 = CARTESIAN_POINT('',(129.545735,-118.963151,1.585)); +#138381 = VECTOR('',#138382,1.); +#138382 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#138383 = PLANE('',#138384); +#138384 = AXIS2_PLACEMENT_3D('',#138385,#138386,#138387); +#138385 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138386 = DIRECTION('',(0.,0.,1.)); +#138387 = DIRECTION('',(1.,0.,-0.)); +#138388 = SHELL_BASED_SURFACE_MODEL('',(#138389)); +#138389 = OPEN_SHELL('',(#138390)); +#138390 = ADVANCED_FACE('',(#138391),#138526,.T.); +#138391 = FACE_BOUND('',#138392,.F.); +#138392 = EDGE_LOOP('',(#138393,#138404,#138412,#138420,#138428,#138437, + #138445,#138453,#138462,#138470,#138478,#138487,#138495,#138503, + #138512,#138520)); +#138393 = ORIENTED_EDGE('',*,*,#138394,.T.); +#138394 = EDGE_CURVE('',#138395,#138397,#138399,.T.); +#138395 = VERTEX_POINT('',#138396); +#138396 = CARTESIAN_POINT('',(130.800207,-118.897951,1.585)); +#138397 = VERTEX_POINT('',#138398); +#138398 = CARTESIAN_POINT('',(130.917341,-118.980918,1.585)); +#138399 = CIRCLE('',#138400,7.499955990671E-02); +#138400 = AXIS2_PLACEMENT_3D('',#138401,#138402,#138403); +#138401 = CARTESIAN_POINT('',(130.84619050095,-118.9572000643,1.585)); +#138402 = DIRECTION('',(0.,0.,-1.)); +#138403 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#138404 = ORIENTED_EDGE('',*,*,#138405,.T.); +#138405 = EDGE_CURVE('',#138397,#138406,#138408,.T.); +#138406 = VERTEX_POINT('',#138407); +#138407 = CARTESIAN_POINT('',(130.712152,-119.596485,1.585)); +#138408 = LINE('',#138409,#138410); +#138409 = CARTESIAN_POINT('',(130.917341,-118.980918,1.585)); +#138410 = VECTOR('',#138411,1.); +#138411 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#138412 = ORIENTED_EDGE('',*,*,#138413,.T.); +#138413 = EDGE_CURVE('',#138406,#138414,#138416,.T.); +#138414 = VERTEX_POINT('',#138415); +#138415 = CARTESIAN_POINT('',(131.009285,-119.596485,1.585)); +#138416 = LINE('',#138417,#138418); +#138417 = CARTESIAN_POINT('',(130.712152,-119.596485,1.585)); +#138418 = VECTOR('',#138419,1.); +#138419 = DIRECTION('',(1.,0.,0.)); +#138420 = ORIENTED_EDGE('',*,*,#138421,.T.); +#138421 = EDGE_CURVE('',#138414,#138422,#138424,.T.); +#138422 = VERTEX_POINT('',#138423); +#138423 = CARTESIAN_POINT('',(131.010726,-119.32352,1.585)); +#138424 = LINE('',#138425,#138426); +#138425 = CARTESIAN_POINT('',(131.009285,-119.596485,1.585)); +#138426 = VECTOR('',#138427,1.); +#138427 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#138428 = ORIENTED_EDGE('',*,*,#138429,.T.); +#138429 = EDGE_CURVE('',#138422,#138430,#138432,.T.); +#138430 = VERTEX_POINT('',#138431); +#138431 = CARTESIAN_POINT('',(131.159285,-119.338152,1.585)); +#138432 = CIRCLE('',#138433,7.500006711464E-02); +#138433 = AXIS2_PLACEMENT_3D('',#138434,#138435,#138436); +#138434 = CARTESIAN_POINT('',(131.08428493288,-119.3381519328,1.585)); +#138435 = DIRECTION('',(0.,0.,-1.)); +#138436 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#138437 = ORIENTED_EDGE('',*,*,#138438,.T.); +#138438 = EDGE_CURVE('',#138430,#138439,#138441,.T.); +#138439 = VERTEX_POINT('',#138440); +#138440 = CARTESIAN_POINT('',(131.159285,-119.596485,1.585)); +#138441 = LINE('',#138442,#138443); +#138442 = CARTESIAN_POINT('',(131.159285,-119.338152,1.585)); +#138443 = VECTOR('',#138444,1.); +#138444 = DIRECTION('',(0.,-1.,0.)); +#138445 = ORIENTED_EDGE('',*,*,#138446,.T.); +#138446 = EDGE_CURVE('',#138439,#138447,#138449,.T.); +#138447 = VERTEX_POINT('',#138448); +#138448 = CARTESIAN_POINT('',(131.241774,-119.597926,1.585)); +#138449 = LINE('',#138450,#138451); +#138450 = CARTESIAN_POINT('',(131.159285,-119.596485,1.585)); +#138451 = VECTOR('',#138452,1.); +#138452 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#138453 = ORIENTED_EDGE('',*,*,#138454,.T.); +#138454 = EDGE_CURVE('',#138447,#138455,#138457,.T.); +#138455 = VERTEX_POINT('',#138456); +#138456 = CARTESIAN_POINT('',(131.227142,-119.746485,1.585)); +#138457 = CIRCLE('',#138458,7.500006711465E-02); +#138458 = AXIS2_PLACEMENT_3D('',#138459,#138460,#138461); +#138459 = CARTESIAN_POINT('',(131.22714206711,-119.6714849328,1.585)); +#138460 = DIRECTION('',(0.,0.,-1.)); +#138461 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#138462 = ORIENTED_EDGE('',*,*,#138463,.T.); +#138463 = EDGE_CURVE('',#138455,#138464,#138466,.T.); +#138464 = VERTEX_POINT('',#138465); +#138465 = CARTESIAN_POINT('',(131.159285,-119.746485,1.585)); +#138466 = LINE('',#138467,#138468); +#138467 = CARTESIAN_POINT('',(131.227142,-119.746485,1.585)); +#138468 = VECTOR('',#138469,1.); +#138469 = DIRECTION('',(-1.,0.,0.)); +#138470 = ORIENTED_EDGE('',*,*,#138471,.T.); +#138471 = EDGE_CURVE('',#138464,#138472,#138474,.T.); +#138472 = VERTEX_POINT('',#138473); +#138473 = CARTESIAN_POINT('',(131.157844,-120.019451,1.585)); +#138474 = LINE('',#138475,#138476); +#138475 = CARTESIAN_POINT('',(131.159285,-119.746485,1.585)); +#138476 = VECTOR('',#138477,1.); +#138477 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#138478 = ORIENTED_EDGE('',*,*,#138479,.T.); +#138479 = EDGE_CURVE('',#138472,#138480,#138482,.T.); +#138480 = VERTEX_POINT('',#138481); +#138481 = CARTESIAN_POINT('',(131.009285,-120.004819,1.585)); +#138482 = CIRCLE('',#138483,7.500006711464E-02); +#138483 = AXIS2_PLACEMENT_3D('',#138484,#138485,#138486); +#138484 = CARTESIAN_POINT('',(131.08428506711,-120.0048190671,1.585)); +#138485 = DIRECTION('',(-0.,0.,-1.)); +#138486 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#138487 = ORIENTED_EDGE('',*,*,#138488,.T.); +#138488 = EDGE_CURVE('',#138480,#138489,#138491,.T.); +#138489 = VERTEX_POINT('',#138490); +#138490 = CARTESIAN_POINT('',(131.009285,-119.746485,1.585)); +#138491 = LINE('',#138492,#138493); +#138492 = CARTESIAN_POINT('',(131.009285,-120.004819,1.585)); +#138493 = VECTOR('',#138494,1.); +#138494 = DIRECTION('',(0.,1.,0.)); +#138495 = ORIENTED_EDGE('',*,*,#138496,.T.); +#138496 = EDGE_CURVE('',#138489,#138497,#138499,.T.); +#138497 = VERTEX_POINT('',#138498); +#138498 = CARTESIAN_POINT('',(130.593463,-119.745044,1.585)); +#138499 = LINE('',#138500,#138501); +#138500 = CARTESIAN_POINT('',(131.009285,-119.746485,1.585)); +#138501 = VECTOR('',#138502,1.); +#138502 = DIRECTION('',(-0.999993995468,3.465404301562E-03,0.)); +#138503 = ORIENTED_EDGE('',*,*,#138504,.T.); +#138504 = EDGE_CURVE('',#138497,#138505,#138507,.T.); +#138505 = VERTEX_POINT('',#138506); +#138506 = CARTESIAN_POINT('',(130.536944,-119.647768,1.585)); +#138507 = CIRCLE('',#138508,7.499997045036E-02); +#138508 = AXIS2_PLACEMENT_3D('',#138509,#138510,#138511); +#138509 = CARTESIAN_POINT('',(130.60809517257,-119.6714852133,1.585)); +#138510 = DIRECTION('',(0.,0.,-1.)); +#138511 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#138512 = ORIENTED_EDGE('',*,*,#138513,.T.); +#138513 = EDGE_CURVE('',#138505,#138514,#138516,.T.); +#138514 = VERTEX_POINT('',#138515); +#138515 = CARTESIAN_POINT('',(130.781033,-118.920058,1.585)); +#138516 = LINE('',#138517,#138518); +#138517 = CARTESIAN_POINT('',(130.536944,-119.647768,1.585)); +#138518 = VECTOR('',#138519,1.); +#138519 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#138520 = ORIENTED_EDGE('',*,*,#138521,.T.); +#138521 = EDGE_CURVE('',#138514,#138395,#138522,.T.); +#138522 = LINE('',#138523,#138524); +#138523 = CARTESIAN_POINT('',(130.781033,-118.920058,1.585)); +#138524 = VECTOR('',#138525,1.); +#138525 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#138526 = PLANE('',#138527); +#138527 = AXIS2_PLACEMENT_3D('',#138528,#138529,#138530); +#138528 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138529 = DIRECTION('',(0.,0.,1.)); +#138530 = DIRECTION('',(1.,0.,-0.)); +#138531 = SHELL_BASED_SURFACE_MODEL('',(#138532)); +#138532 = OPEN_SHELL('',(#138533)); +#138533 = ADVANCED_FACE('',(#138534,#138721),#138823,.T.); +#138534 = FACE_BOUND('',#138535,.F.); +#138535 = EDGE_LOOP('',(#138536,#138546,#138554,#138562,#138570,#138578, + #138586,#138594,#138602,#138610,#138618,#138626,#138634,#138642, + #138650,#138659,#138667,#138675,#138683,#138691,#138699,#138707, + #138715)); +#138536 = ORIENTED_EDGE('',*,*,#138537,.T.); +#138537 = EDGE_CURVE('',#138538,#138540,#138542,.T.); +#138538 = VERTEX_POINT('',#138539); +#138539 = CARTESIAN_POINT('',(82.877073,-118.525279,1.585)); +#138540 = VERTEX_POINT('',#138541); +#138541 = CARTESIAN_POINT('',(83.168409,-118.381516,1.585)); +#138542 = LINE('',#138543,#138544); +#138543 = CARTESIAN_POINT('',(82.877073,-118.525279,1.585)); +#138544 = VECTOR('',#138545,1.); +#138545 = DIRECTION('',(0.89676039911,0.442516425218,0.)); +#138546 = ORIENTED_EDGE('',*,*,#138547,.T.); +#138547 = EDGE_CURVE('',#138540,#138548,#138550,.T.); +#138548 = VERTEX_POINT('',#138549); +#138549 = CARTESIAN_POINT('',(83.695975,-118.252558,1.585)); +#138550 = LINE('',#138551,#138552); +#138551 = CARTESIAN_POINT('',(83.168409,-118.381516,1.585)); +#138552 = VECTOR('',#138553,1.); +#138553 = DIRECTION('',(0.971400101305,0.23744861167,0.)); +#138554 = ORIENTED_EDGE('',*,*,#138555,.T.); +#138555 = EDGE_CURVE('',#138548,#138556,#138558,.T.); +#138556 = VERTEX_POINT('',#138557); +#138557 = CARTESIAN_POINT('',(84.327417,-118.252883,1.585)); +#138558 = LINE('',#138559,#138560); +#138559 = CARTESIAN_POINT('',(83.695975,-118.252558,1.585)); +#138560 = VECTOR('',#138561,1.); +#138561 = DIRECTION('',(0.999999867545,-5.146948681837E-04,0.)); +#138562 = ORIENTED_EDGE('',*,*,#138563,.T.); +#138563 = EDGE_CURVE('',#138556,#138564,#138566,.T.); +#138564 = VERTEX_POINT('',#138565); +#138565 = CARTESIAN_POINT('',(84.358694,-118.25686,1.585)); +#138566 = LINE('',#138567,#138568); +#138567 = CARTESIAN_POINT('',(84.327417,-118.252883,1.585)); +#138568 = VECTOR('',#138569,1.); +#138569 = DIRECTION('',(0.992012638826,-0.126138512793,0.)); +#138570 = ORIENTED_EDGE('',*,*,#138571,.T.); +#138571 = EDGE_CURVE('',#138564,#138572,#138574,.T.); +#138572 = VERTEX_POINT('',#138573); +#138573 = CARTESIAN_POINT('',(84.881624,-118.390562,1.585)); +#138574 = LINE('',#138575,#138576); +#138575 = CARTESIAN_POINT('',(84.358694,-118.25686,1.585)); +#138576 = VECTOR('',#138577,1.); +#138577 = DIRECTION('',(0.968834186972,-0.247710149478,0.)); +#138578 = ORIENTED_EDGE('',*,*,#138579,.T.); +#138579 = EDGE_CURVE('',#138572,#138580,#138582,.T.); +#138580 = VERTEX_POINT('',#138581); +#138581 = CARTESIAN_POINT('',(85.157139,-118.531501,1.585)); +#138582 = LINE('',#138583,#138584); +#138583 = CARTESIAN_POINT('',(84.881624,-118.390562,1.585)); +#138584 = VECTOR('',#138585,1.); +#138585 = DIRECTION('',(0.890277200114,-0.455419045449,0.)); +#138586 = ORIENTED_EDGE('',*,*,#138587,.T.); +#138587 = EDGE_CURVE('',#138580,#138588,#138590,.T.); +#138588 = VERTEX_POINT('',#138589); +#138589 = CARTESIAN_POINT('',(85.313701,-118.690473,1.585)); +#138590 = LINE('',#138591,#138592); +#138591 = CARTESIAN_POINT('',(85.157139,-118.531501,1.585)); +#138592 = VECTOR('',#138593,1.); +#138593 = DIRECTION('',(0.701685542004,-0.712486771908,0.)); +#138594 = ORIENTED_EDGE('',*,*,#138595,.T.); +#138595 = EDGE_CURVE('',#138588,#138596,#138598,.T.); +#138596 = VERTEX_POINT('',#138597); +#138597 = CARTESIAN_POINT('',(85.457464,-118.981809,1.585)); +#138598 = LINE('',#138599,#138600); +#138599 = CARTESIAN_POINT('',(85.313701,-118.690473,1.585)); +#138600 = VECTOR('',#138601,1.); +#138601 = DIRECTION('',(0.442516425218,-0.89676039911,0.)); +#138602 = ORIENTED_EDGE('',*,*,#138603,.T.); +#138603 = EDGE_CURVE('',#138596,#138604,#138606,.T.); +#138604 = VERTEX_POINT('',#138605); +#138605 = CARTESIAN_POINT('',(85.46279,-119.021428,1.585)); +#138606 = LINE('',#138607,#138608); +#138607 = CARTESIAN_POINT('',(85.457464,-118.981809,1.585)); +#138608 = VECTOR('',#138609,1.); +#138609 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#138610 = ORIENTED_EDGE('',*,*,#138611,.T.); +#138611 = EDGE_CURVE('',#138604,#138612,#138614,.T.); +#138612 = VERTEX_POINT('',#138613); +#138613 = CARTESIAN_POINT('',(85.459908,-119.298311,1.585)); +#138614 = LINE('',#138615,#138616); +#138615 = CARTESIAN_POINT('',(85.46279,-119.021428,1.585)); +#138616 = VECTOR('',#138617,1.); +#138617 = DIRECTION('',(-1.040816479305E-02,-0.999945833586,0.)); +#138618 = ORIENTED_EDGE('',*,*,#138619,.T.); +#138619 = EDGE_CURVE('',#138612,#138620,#138622,.T.); +#138620 = VERTEX_POINT('',#138621); +#138621 = CARTESIAN_POINT('',(85.446954,-119.336129,1.585)); +#138622 = LINE('',#138623,#138624); +#138623 = CARTESIAN_POINT('',(85.459908,-119.298311,1.585)); +#138624 = VECTOR('',#138625,1.); +#138625 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#138626 = ORIENTED_EDGE('',*,*,#138627,.T.); +#138627 = EDGE_CURVE('',#138620,#138628,#138630,.T.); +#138628 = VERTEX_POINT('',#138629); +#138629 = CARTESIAN_POINT('',(85.307479,-119.608634,1.585)); +#138630 = LINE('',#138631,#138632); +#138631 = CARTESIAN_POINT('',(85.446954,-119.336129,1.585)); +#138632 = VECTOR('',#138633,1.); +#138633 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#138634 = ORIENTED_EDGE('',*,*,#138635,.T.); +#138635 = EDGE_CURVE('',#138628,#138636,#138638,.T.); +#138636 = VERTEX_POINT('',#138637); +#138637 = CARTESIAN_POINT('',(85.148507,-119.765197,1.585)); +#138638 = LINE('',#138639,#138640); +#138639 = CARTESIAN_POINT('',(85.307479,-119.608634,1.585)); +#138640 = VECTOR('',#138641,1.); +#138641 = DIRECTION('',(-0.712484531253,-0.701687817141,0.)); +#138642 = ORIENTED_EDGE('',*,*,#138643,.T.); +#138643 = EDGE_CURVE('',#138636,#138644,#138646,.T.); +#138644 = VERTEX_POINT('',#138645); +#138645 = CARTESIAN_POINT('',(84.85717,-119.908959,1.585)); +#138646 = LINE('',#138647,#138648); +#138647 = CARTESIAN_POINT('',(85.148507,-119.765197,1.585)); +#138648 = VECTOR('',#138649,1.); +#138649 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#138650 = ORIENTED_EDGE('',*,*,#138651,.T.); +#138651 = EDGE_CURVE('',#138644,#138652,#138654,.T.); +#138652 = VERTEX_POINT('',#138653); +#138653 = CARTESIAN_POINT('',(83.143956,-119.899913,1.585)); +#138654 = CIRCLE('',#138655,2.460365171697); +#138655 = AXIS2_PLACEMENT_3D('',#138656,#138657,#138658); +#138656 = CARTESIAN_POINT('',(84.012741069123,-117.5980421778,1.585)); +#138657 = DIRECTION('',(-0.,0.,-1.)); +#138658 = DIRECTION('',(0.343212845227,-0.93925765521,-0.)); +#138659 = ORIENTED_EDGE('',*,*,#138660,.T.); +#138660 = EDGE_CURVE('',#138652,#138661,#138663,.T.); +#138661 = VERTEX_POINT('',#138662); +#138662 = CARTESIAN_POINT('',(82.868442,-119.758975,1.585)); +#138663 = LINE('',#138664,#138665); +#138664 = CARTESIAN_POINT('',(83.143956,-119.899913,1.585)); +#138665 = VECTOR('',#138666,1.); +#138666 = DIRECTION('',(-0.890277840055,0.455417794456,0.)); +#138667 = ORIENTED_EDGE('',*,*,#138668,.T.); +#138668 = EDGE_CURVE('',#138661,#138669,#138671,.T.); +#138669 = VERTEX_POINT('',#138670); +#138670 = CARTESIAN_POINT('',(82.711879,-119.600001,1.585)); +#138671 = LINE('',#138672,#138673); +#138672 = CARTESIAN_POINT('',(82.868442,-119.758975,1.585)); +#138673 = VECTOR('',#138674,1.); +#138674 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#138675 = ORIENTED_EDGE('',*,*,#138676,.T.); +#138676 = EDGE_CURVE('',#138669,#138677,#138679,.T.); +#138677 = VERTEX_POINT('',#138678); +#138678 = CARTESIAN_POINT('',(82.568116,-119.308666,1.585)); +#138679 = LINE('',#138680,#138681); +#138680 = CARTESIAN_POINT('',(82.711879,-119.600001,1.585)); +#138681 = VECTOR('',#138682,1.); +#138682 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#138683 = ORIENTED_EDGE('',*,*,#138684,.T.); +#138684 = EDGE_CURVE('',#138677,#138685,#138687,.T.); +#138685 = VERTEX_POINT('',#138686); +#138686 = CARTESIAN_POINT('',(82.56279,-119.269047,1.585)); +#138687 = LINE('',#138688,#138689); +#138688 = CARTESIAN_POINT('',(82.568116,-119.308666,1.585)); +#138689 = VECTOR('',#138690,1.); +#138690 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#138691 = ORIENTED_EDGE('',*,*,#138692,.T.); +#138692 = EDGE_CURVE('',#138685,#138693,#138695,.T.); +#138693 = VERTEX_POINT('',#138694); +#138694 = CARTESIAN_POINT('',(82.565672,-118.992164,1.585)); +#138695 = LINE('',#138696,#138697); +#138696 = CARTESIAN_POINT('',(82.56279,-119.269047,1.585)); +#138697 = VECTOR('',#138698,1.); +#138698 = DIRECTION('',(1.040816479305E-02,0.999945833586,0.)); +#138699 = ORIENTED_EDGE('',*,*,#138700,.T.); +#138700 = EDGE_CURVE('',#138693,#138701,#138703,.T.); +#138701 = VERTEX_POINT('',#138702); +#138702 = CARTESIAN_POINT('',(82.578626,-118.954346,1.585)); +#138703 = LINE('',#138704,#138705); +#138704 = CARTESIAN_POINT('',(82.565672,-118.992164,1.585)); +#138705 = VECTOR('',#138706,1.); +#138706 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#138707 = ORIENTED_EDGE('',*,*,#138708,.T.); +#138708 = EDGE_CURVE('',#138701,#138709,#138711,.T.); +#138709 = VERTEX_POINT('',#138710); +#138710 = CARTESIAN_POINT('',(82.718101,-118.681841,1.585)); +#138711 = LINE('',#138712,#138713); +#138712 = CARTESIAN_POINT('',(82.578626,-118.954346,1.585)); +#138713 = VECTOR('',#138714,1.); +#138714 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#138715 = ORIENTED_EDGE('',*,*,#138716,.T.); +#138716 = EDGE_CURVE('',#138709,#138538,#138717,.T.); +#138717 = LINE('',#138718,#138719); +#138718 = CARTESIAN_POINT('',(82.718101,-118.681841,1.585)); +#138719 = VECTOR('',#138720,1.); +#138720 = DIRECTION('',(0.712486771907,0.701685542004,0.)); +#138721 = FACE_BOUND('',#138722,.F.); +#138722 = EDGE_LOOP('',(#138723,#138734,#138742,#138750,#138759,#138767, + #138775,#138784,#138792,#138800,#138809,#138817)); +#138723 = ORIENTED_EDGE('',*,*,#138724,.T.); +#138724 = EDGE_CURVE('',#138725,#138727,#138729,.T.); +#138725 = VERTEX_POINT('',#138726); +#138726 = CARTESIAN_POINT('',(84.765199,-118.667718,1.585)); +#138727 = VERTEX_POINT('',#138728); +#138728 = CARTESIAN_POINT('',(83.260385,-118.667716,1.585)); +#138729 = CIRCLE('',#138730,2.164280308008); +#138730 = AXIS2_PLACEMENT_3D('',#138731,#138732,#138733); +#138731 = CARTESIAN_POINT('',(84.012789302944,-120.6970008534,1.585)); +#138732 = DIRECTION('',(0.,0.,1.)); +#138733 = DIRECTION('',(0.347648913254,0.937624782689,-0.)); +#138734 = ORIENTED_EDGE('',*,*,#138735,.T.); +#138735 = EDGE_CURVE('',#138727,#138736,#138738,.T.); +#138736 = VERTEX_POINT('',#138737); +#138737 = CARTESIAN_POINT('',(83.049263,-118.773278,1.585)); +#138738 = LINE('',#138739,#138740); +#138739 = CARTESIAN_POINT('',(83.260385,-118.667716,1.585)); +#138740 = VECTOR('',#138741,1.); +#138741 = DIRECTION('',(-0.89442549638,-0.447216984724,0.)); +#138742 = ORIENTED_EDGE('',*,*,#138743,.T.); +#138743 = EDGE_CURVE('',#138736,#138744,#138746,.T.); +#138744 = VERTEX_POINT('',#138745); +#138745 = CARTESIAN_POINT('',(82.959877,-118.862663,1.585)); +#138746 = LINE('',#138747,#138748); +#138747 = CARTESIAN_POINT('',(83.049263,-118.773278,1.585)); +#138748 = VECTOR('',#138749,1.); +#138749 = DIRECTION('',(-0.707110736553,-0.707102825798,0.)); +#138750 = ORIENTED_EDGE('',*,*,#138751,.T.); +#138751 = EDGE_CURVE('',#138744,#138752,#138754,.T.); +#138752 = VERTEX_POINT('',#138753); +#138753 = CARTESIAN_POINT('',(82.959878,-119.427812,1.585)); +#138754 = CIRCLE('',#138755,0.428730625396); +#138755 = AXIS2_PLACEMENT_3D('',#138756,#138757,#138758); +#138756 = CARTESIAN_POINT('',(83.282308269471,-119.1452369294,1.585)); +#138757 = DIRECTION('',(0.,0.,1.)); +#138758 = DIRECTION('',(-0.752060269016,0.659094342084,0.)); +#138759 = ORIENTED_EDGE('',*,*,#138760,.T.); +#138760 = EDGE_CURVE('',#138752,#138761,#138763,.T.); +#138761 = VERTEX_POINT('',#138762); +#138762 = CARTESIAN_POINT('',(83.049263,-119.517198,1.585)); +#138763 = LINE('',#138764,#138765); +#138764 = CARTESIAN_POINT('',(82.959878,-119.427812,1.585)); +#138765 = VECTOR('',#138766,1.); +#138766 = DIRECTION('',(0.707102825798,-0.707110736553,0.)); +#138767 = ORIENTED_EDGE('',*,*,#138768,.T.); +#138768 = EDGE_CURVE('',#138761,#138769,#138771,.T.); +#138769 = VERTEX_POINT('',#138770); +#138770 = CARTESIAN_POINT('',(83.260383,-119.622757,1.585)); +#138771 = LINE('',#138772,#138773); +#138772 = CARTESIAN_POINT('',(83.049263,-119.517198,1.585)); +#138773 = VECTOR('',#138774,1.); +#138774 = DIRECTION('',(0.89442888563,-0.447210206225,0.)); +#138775 = ORIENTED_EDGE('',*,*,#138776,.T.); +#138776 = EDGE_CURVE('',#138769,#138777,#138779,.T.); +#138777 = VERTEX_POINT('',#138778); +#138778 = CARTESIAN_POINT('',(84.765196,-119.622758,1.585)); +#138779 = CIRCLE('',#138780,2.164247267134); +#138780 = AXIS2_PLACEMENT_3D('',#138781,#138782,#138783); +#138781 = CARTESIAN_POINT('',(84.012790848506,-117.5935087,1.585)); +#138782 = DIRECTION('',(0.,0.,1.)); +#138783 = DIRECTION('',(-0.347653366568,-0.937623131495,0.)); +#138784 = ORIENTED_EDGE('',*,*,#138785,.T.); +#138785 = EDGE_CURVE('',#138777,#138786,#138788,.T.); +#138786 = VERTEX_POINT('',#138787); +#138787 = CARTESIAN_POINT('',(84.976316,-119.517198,1.585)); +#138788 = LINE('',#138789,#138790); +#138789 = CARTESIAN_POINT('',(84.765196,-119.622758,1.585)); +#138790 = VECTOR('',#138791,1.); +#138791 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#138792 = ORIENTED_EDGE('',*,*,#138793,.T.); +#138793 = EDGE_CURVE('',#138786,#138794,#138796,.T.); +#138794 = VERTEX_POINT('',#138795); +#138795 = CARTESIAN_POINT('',(85.065701,-119.427812,1.585)); +#138796 = LINE('',#138797,#138798); +#138797 = CARTESIAN_POINT('',(84.976316,-119.517198,1.585)); +#138798 = VECTOR('',#138799,1.); +#138799 = DIRECTION('',(0.707102825798,0.707110736553,0.)); +#138800 = ORIENTED_EDGE('',*,*,#138801,.T.); +#138801 = EDGE_CURVE('',#138794,#138802,#138804,.T.); +#138802 = VERTEX_POINT('',#138803); +#138803 = CARTESIAN_POINT('',(85.065702,-118.862663,1.585)); +#138804 = CIRCLE('',#138805,0.428727279187); +#138805 = AXIS2_PLACEMENT_3D('',#138806,#138807,#138808); +#138806 = CARTESIAN_POINT('',(84.743275179939,-119.1452369294,1.585)); +#138807 = DIRECTION('',(0.,-0.,1.)); +#138808 = DIRECTION('',(0.752053428167,-0.65910214776,-0.)); +#138809 = ORIENTED_EDGE('',*,*,#138810,.T.); +#138810 = EDGE_CURVE('',#138802,#138811,#138813,.T.); +#138811 = VERTEX_POINT('',#138812); +#138812 = CARTESIAN_POINT('',(84.976316,-118.773277,1.585)); +#138813 = LINE('',#138814,#138815); +#138814 = CARTESIAN_POINT('',(85.065702,-118.862663,1.585)); +#138815 = VECTOR('',#138816,1.); +#138816 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#138817 = ORIENTED_EDGE('',*,*,#138818,.T.); +#138818 = EDGE_CURVE('',#138811,#138725,#138819,.T.); +#138819 = LINE('',#138820,#138821); +#138820 = CARTESIAN_POINT('',(84.976316,-118.773277,1.585)); +#138821 = VECTOR('',#138822,1.); +#138822 = DIRECTION('',(-0.894426343671,0.447215290154,0.)); +#138823 = PLANE('',#138824); +#138824 = AXIS2_PLACEMENT_3D('',#138825,#138826,#138827); +#138825 = CARTESIAN_POINT('',(0.,0.,1.585)); +#138826 = DIRECTION('',(0.,0.,1.)); +#138827 = DIRECTION('',(1.,0.,-0.)); +#138828 = SHELL_BASED_SURFACE_MODEL('',(#138829)); +#138829 = OPEN_SHELL('',(#138830)); +#138830 = ADVANCED_FACE('',(#138831),#139006,.T.); +#138831 = FACE_BOUND('',#138832,.F.); +#138832 = EDGE_LOOP('',(#138833,#138843,#138851,#138859,#138867,#138875, + #138884,#138892,#138901,#138909,#138917,#138925,#138933,#138941, + #138950,#138958,#138966,#138974,#138983,#138991,#139000)); +#138833 = ORIENTED_EDGE('',*,*,#138834,.T.); +#138834 = EDGE_CURVE('',#138835,#138837,#138839,.T.); +#138835 = VERTEX_POINT('',#138836); +#138836 = CARTESIAN_POINT('',(206.151866,-118.795696,1.585)); +#138837 = VERTEX_POINT('',#138838); +#138838 = CARTESIAN_POINT('',(206.272313,-118.737636,1.585)); +#138839 = LINE('',#138840,#138841); +#138840 = CARTESIAN_POINT('',(206.151866,-118.795696,1.585)); +#138841 = VECTOR('',#138842,1.); +#138842 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#138843 = ORIENTED_EDGE('',*,*,#138844,.T.); +#138844 = EDGE_CURVE('',#138837,#138845,#138847,.T.); +#138845 = VERTEX_POINT('',#138846); +#138846 = CARTESIAN_POINT('',(206.389588,-118.736924,1.585)); +#138847 = LINE('',#138848,#138849); +#138848 = CARTESIAN_POINT('',(206.272313,-118.737636,1.585)); +#138849 = VECTOR('',#138850,1.); +#138850 = DIRECTION('',(0.999981570774,6.071088282957E-03,0.)); +#138851 = ORIENTED_EDGE('',*,*,#138852,.T.); +#138852 = EDGE_CURVE('',#138845,#138853,#138855,.T.); +#138853 = VERTEX_POINT('',#138854); +#138854 = CARTESIAN_POINT('',(206.566708,-118.796454,1.585)); +#138855 = LINE('',#138856,#138857); +#138856 = CARTESIAN_POINT('',(206.389588,-118.736924,1.585)); +#138857 = VECTOR('',#138858,1.); +#138858 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#138859 = ORIENTED_EDGE('',*,*,#138860,.T.); +#138860 = EDGE_CURVE('',#138853,#138861,#138863,.T.); +#138861 = VERTEX_POINT('',#138862); +#138862 = CARTESIAN_POINT('',(207.021469,-119.249176,1.585)); +#138863 = LINE('',#138864,#138865); +#138864 = CARTESIAN_POINT('',(206.566708,-118.796454,1.585)); +#138865 = VECTOR('',#138866,1.); +#138866 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#138867 = ORIENTED_EDGE('',*,*,#138868,.T.); +#138868 = EDGE_CURVE('',#138861,#138869,#138871,.T.); +#138869 = VERTEX_POINT('',#138870); +#138870 = CARTESIAN_POINT('',(207.02291,-118.796563,1.585)); +#138871 = LINE('',#138872,#138873); +#138872 = CARTESIAN_POINT('',(207.021469,-119.249176,1.585)); +#138873 = VECTOR('',#138874,1.); +#138874 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#138875 = ORIENTED_EDGE('',*,*,#138876,.T.); +#138876 = EDGE_CURVE('',#138869,#138877,#138879,.T.); +#138877 = VERTEX_POINT('',#138878); +#138878 = CARTESIAN_POINT('',(207.171469,-118.811195,1.585)); +#138879 = CIRCLE('',#138880,7.500006711464E-02); +#138880 = AXIS2_PLACEMENT_3D('',#138881,#138882,#138883); +#138881 = CARTESIAN_POINT('',(207.09646893288,-118.8111949328,1.585)); +#138882 = DIRECTION('',(0.,0.,-1.)); +#138883 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#138884 = ORIENTED_EDGE('',*,*,#138885,.T.); +#138885 = EDGE_CURVE('',#138877,#138886,#138888,.T.); +#138886 = VERTEX_POINT('',#138887); +#138887 = CARTESIAN_POINT('',(207.170028,-119.444874,1.585)); +#138888 = LINE('',#138889,#138890); +#138889 = CARTESIAN_POINT('',(207.171469,-118.811195,1.585)); +#138890 = VECTOR('',#138891,1.); +#138891 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#138892 = ORIENTED_EDGE('',*,*,#138893,.T.); +#138893 = EDGE_CURVE('',#138886,#138894,#138896,.T.); +#138894 = VERTEX_POINT('',#138895); +#138895 = CARTESIAN_POINT('',(207.111101,-119.503801,1.585)); +#138896 = CIRCLE('',#138897,7.499663284017E-02); +#138897 = AXIS2_PLACEMENT_3D('',#138898,#138899,#138900); +#138898 = CARTESIAN_POINT('',(207.09647198775,-119.4302449877,1.585)); +#138899 = DIRECTION('',(0.,0.,-1.)); +#138900 = DIRECTION('',(0.980790863048,-0.195062254064,0.)); +#138901 = ORIENTED_EDGE('',*,*,#138902,.T.); +#138902 = EDGE_CURVE('',#138894,#138903,#138905,.T.); +#138903 = VERTEX_POINT('',#138904); +#138904 = CARTESIAN_POINT('',(207.073918,-119.500521,1.585)); +#138905 = LINE('',#138906,#138907); +#138906 = CARTESIAN_POINT('',(207.111101,-119.503801,1.585)); +#138907 = VECTOR('',#138908,1.); +#138908 = DIRECTION('',(-0.996131850393,8.787113652145E-02,0.)); +#138909 = ORIENTED_EDGE('',*,*,#138910,.T.); +#138910 = EDGE_CURVE('',#138903,#138911,#138913,.T.); +#138911 = VERTEX_POINT('',#138912); +#138912 = CARTESIAN_POINT('',(207.043436,-119.483275,1.585)); +#138913 = LINE('',#138914,#138915); +#138914 = CARTESIAN_POINT('',(207.073918,-119.500521,1.585)); +#138915 = VECTOR('',#138916,1.); +#138916 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#138917 = ORIENTED_EDGE('',*,*,#138918,.T.); +#138918 = EDGE_CURVE('',#138911,#138919,#138921,.T.); +#138919 = VERTEX_POINT('',#138920); +#138920 = CARTESIAN_POINT('',(206.484526,-118.924366,1.585)); +#138921 = LINE('',#138922,#138923); +#138922 = CARTESIAN_POINT('',(207.043436,-119.483275,1.585)); +#138923 = VECTOR('',#138924,1.); +#138924 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#138925 = ORIENTED_EDGE('',*,*,#138926,.T.); +#138926 = EDGE_CURVE('',#138919,#138927,#138929,.T.); +#138927 = VERTEX_POINT('',#138928); +#138928 = CARTESIAN_POINT('',(206.370013,-118.886195,1.585)); +#138929 = LINE('',#138930,#138931); +#138930 = CARTESIAN_POINT('',(206.484526,-118.924366,1.585)); +#138931 = VECTOR('',#138932,1.); +#138932 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#138933 = ORIENTED_EDGE('',*,*,#138934,.T.); +#138934 = EDGE_CURVE('',#138927,#138935,#138937,.T.); +#138935 = VERTEX_POINT('',#138936); +#138936 = CARTESIAN_POINT('',(206.30465,-118.886195,1.585)); +#138937 = LINE('',#138938,#138939); +#138938 = CARTESIAN_POINT('',(206.370013,-118.886195,1.585)); +#138939 = VECTOR('',#138940,1.); +#138940 = DIRECTION('',(-1.,0.,0.)); +#138941 = ORIENTED_EDGE('',*,*,#138942,.T.); +#138942 = EDGE_CURVE('',#138935,#138943,#138945,.T.); +#138943 = VERTEX_POINT('',#138944); +#138944 = CARTESIAN_POINT('',(206.171469,-119.019376,1.585)); +#138945 = CIRCLE('',#138946,0.18686440374); +#138946 = AXIS2_PLACEMENT_3D('',#138947,#138948,#138949); +#138947 = CARTESIAN_POINT('',(206.352186,-119.066912,1.585)); +#138948 = DIRECTION('',(0.,0.,1.)); +#138949 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#138950 = ORIENTED_EDGE('',*,*,#138951,.T.); +#138951 = EDGE_CURVE('',#138943,#138952,#138954,.T.); +#138952 = VERTEX_POINT('',#138953); +#138953 = CARTESIAN_POINT('',(206.171469,-119.222061,1.585)); +#138954 = LINE('',#138955,#138956); +#138955 = CARTESIAN_POINT('',(206.171469,-119.019376,1.585)); +#138956 = VECTOR('',#138957,1.); +#138957 = DIRECTION('',(0.,-1.,0.)); +#138958 = ORIENTED_EDGE('',*,*,#138959,.T.); +#138959 = EDGE_CURVE('',#138952,#138960,#138962,.T.); +#138960 = VERTEX_POINT('',#138961); +#138961 = CARTESIAN_POINT('',(206.205727,-119.290577,1.585)); +#138962 = LINE('',#138963,#138964); +#138963 = CARTESIAN_POINT('',(206.171469,-119.222061,1.585)); +#138964 = VECTOR('',#138965,1.); +#138965 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#138966 = ORIENTED_EDGE('',*,*,#138967,.T.); +#138967 = EDGE_CURVE('',#138960,#138968,#138970,.T.); +#138968 = VERTEX_POINT('',#138969); +#138969 = CARTESIAN_POINT('',(206.254067,-119.340955,1.585)); +#138970 = LINE('',#138971,#138972); +#138971 = CARTESIAN_POINT('',(206.205727,-119.290577,1.585)); +#138972 = VECTOR('',#138973,1.); +#138973 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#138974 = ORIENTED_EDGE('',*,*,#138975,.T.); +#138975 = EDGE_CURVE('',#138968,#138976,#138978,.T.); +#138976 = VERTEX_POINT('',#138977); +#138977 = CARTESIAN_POINT('',(206.138674,-119.435656,1.585)); +#138978 = CIRCLE('',#138979,7.500003178655E-02); +#138979 = AXIS2_PLACEMENT_3D('',#138980,#138981,#138982); +#138980 = CARTESIAN_POINT('',(206.19170656212,-119.3826225,1.585)); +#138981 = DIRECTION('',(0.,0.,-1.)); +#138982 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#138983 = ORIENTED_EDGE('',*,*,#138984,.T.); +#138984 = EDGE_CURVE('',#138976,#138985,#138987,.T.); +#138985 = VERTEX_POINT('',#138986); +#138986 = CARTESIAN_POINT('',(206.077006,-119.368545,1.585)); +#138987 = LINE('',#138988,#138989); +#138988 = CARTESIAN_POINT('',(206.138674,-119.435656,1.585)); +#138989 = VECTOR('',#138990,1.); +#138990 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#138991 = ORIENTED_EDGE('',*,*,#138992,.T.); +#138992 = EDGE_CURVE('',#138985,#138993,#138995,.T.); +#138993 = VERTEX_POINT('',#138994); +#138994 = CARTESIAN_POINT('',(206.086336,-118.859149,1.585)); +#138995 = CIRCLE('',#138996,0.450051227017); +#138996 = AXIS2_PLACEMENT_3D('',#138997,#138998,#138999); +#138997 = CARTESIAN_POINT('',(206.45262532415,-119.1206413286,1.585)); +#138998 = DIRECTION('',(0.,0.,-1.)); +#138999 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#139000 = ORIENTED_EDGE('',*,*,#139001,.T.); +#139001 = EDGE_CURVE('',#138993,#138835,#139002,.T.); +#139002 = LINE('',#139003,#139004); +#139003 = CARTESIAN_POINT('',(206.086336,-118.859149,1.585)); +#139004 = VECTOR('',#139005,1.); +#139005 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#139006 = PLANE('',#139007); +#139007 = AXIS2_PLACEMENT_3D('',#139008,#139009,#139010); +#139008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139009 = DIRECTION('',(0.,0.,1.)); +#139010 = DIRECTION('',(1.,0.,-0.)); +#139011 = SHELL_BASED_SURFACE_MODEL('',(#139012)); +#139012 = OPEN_SHELL('',(#139013)); +#139013 = ADVANCED_FACE('',(#139014),#139050,.T.); +#139014 = FACE_BOUND('',#139015,.F.); +#139015 = EDGE_LOOP('',(#139016,#139027,#139035,#139044)); +#139016 = ORIENTED_EDGE('',*,*,#139017,.T.); +#139017 = EDGE_CURVE('',#139018,#139020,#139022,.T.); +#139018 = VERTEX_POINT('',#139019); +#139019 = CARTESIAN_POINT('',(123.44165,-119.2431,1.585)); +#139020 = VERTEX_POINT('',#139021); +#139021 = CARTESIAN_POINT('',(123.44165,-119.1231,1.585)); +#139022 = CIRCLE('',#139023,6.000000000043E-02); +#139023 = AXIS2_PLACEMENT_3D('',#139024,#139025,#139026); +#139024 = CARTESIAN_POINT('',(123.44164977441,-119.1831,1.585)); +#139025 = DIRECTION('',(0.,0.,-1.)); +#139026 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#139027 = ORIENTED_EDGE('',*,*,#139028,.T.); +#139028 = EDGE_CURVE('',#139020,#139029,#139031,.T.); +#139029 = VERTEX_POINT('',#139030); +#139030 = CARTESIAN_POINT('',(124.94165,-119.1231,1.585)); +#139031 = LINE('',#139032,#139033); +#139032 = CARTESIAN_POINT('',(123.44165,-119.1231,1.585)); +#139033 = VECTOR('',#139034,1.); +#139034 = DIRECTION('',(1.,0.,0.)); +#139035 = ORIENTED_EDGE('',*,*,#139036,.T.); +#139036 = EDGE_CURVE('',#139029,#139037,#139039,.T.); +#139037 = VERTEX_POINT('',#139038); +#139038 = CARTESIAN_POINT('',(124.94165,-119.2431,1.585)); +#139039 = CIRCLE('',#139040,6.000000000042E-02); +#139040 = AXIS2_PLACEMENT_3D('',#139041,#139042,#139043); +#139041 = CARTESIAN_POINT('',(124.94165022558,-119.1831,1.585)); +#139042 = DIRECTION('',(0.,0.,-1.)); +#139043 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#139044 = ORIENTED_EDGE('',*,*,#139045,.T.); +#139045 = EDGE_CURVE('',#139037,#139018,#139046,.T.); +#139046 = LINE('',#139047,#139048); +#139047 = CARTESIAN_POINT('',(124.94165,-119.2431,1.585)); +#139048 = VECTOR('',#139049,1.); +#139049 = DIRECTION('',(-1.,0.,0.)); +#139050 = PLANE('',#139051); +#139051 = AXIS2_PLACEMENT_3D('',#139052,#139053,#139054); +#139052 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139053 = DIRECTION('',(0.,0.,1.)); +#139054 = DIRECTION('',(1.,0.,-0.)); +#139055 = SHELL_BASED_SURFACE_MODEL('',(#139056)); +#139056 = OPEN_SHELL('',(#139057)); +#139057 = ADVANCED_FACE('',(#139058),#139192,.T.); +#139058 = FACE_BOUND('',#139059,.F.); +#139059 = EDGE_LOOP('',(#139060,#139070,#139078,#139087,#139095,#139103, + #139112,#139120,#139129,#139137,#139145,#139153,#139161,#139170, + #139178,#139186)); +#139060 = ORIENTED_EDGE('',*,*,#139061,.T.); +#139061 = EDGE_CURVE('',#139062,#139064,#139066,.T.); +#139062 = VERTEX_POINT('',#139063); +#139063 = CARTESIAN_POINT('',(100.596912,-117.701841,1.585)); +#139064 = VERTEX_POINT('',#139065); +#139065 = CARTESIAN_POINT('',(100.635368,-117.68126,1.585)); +#139066 = LINE('',#139067,#139068); +#139067 = CARTESIAN_POINT('',(100.596912,-117.701841,1.585)); +#139068 = VECTOR('',#139069,1.); +#139069 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#139070 = ORIENTED_EDGE('',*,*,#139071,.T.); +#139071 = EDGE_CURVE('',#139064,#139072,#139074,.T.); +#139072 = VERTEX_POINT('',#139073); +#139073 = CARTESIAN_POINT('',(100.657205,-117.68126,1.585)); +#139074 = LINE('',#139075,#139076); +#139075 = CARTESIAN_POINT('',(100.635368,-117.68126,1.585)); +#139076 = VECTOR('',#139077,1.); +#139077 = DIRECTION('',(1.,0.,0.)); +#139078 = ORIENTED_EDGE('',*,*,#139079,.T.); +#139079 = EDGE_CURVE('',#139072,#139080,#139082,.T.); +#139080 = VERTEX_POINT('',#139081); +#139081 = CARTESIAN_POINT('',(100.725,-117.754819,1.585)); +#139082 = CIRCLE('',#139083,7.216898094225E-02); +#139083 = AXIS2_PLACEMENT_3D('',#139084,#139085,#139086); +#139084 = CARTESIAN_POINT('',(100.65284706389,-117.7532972834,1.585)); +#139085 = DIRECTION('',(0.,0.,-1.)); +#139086 = DIRECTION('',(6.038516895247E-02,0.998175150648,0.)); +#139087 = ORIENTED_EDGE('',*,*,#139088,.T.); +#139088 = EDGE_CURVE('',#139080,#139089,#139091,.T.); +#139089 = VERTEX_POINT('',#139090); +#139090 = CARTESIAN_POINT('',(100.725,-118.679819,1.585)); +#139091 = LINE('',#139092,#139093); +#139092 = CARTESIAN_POINT('',(100.725,-117.754819,1.585)); +#139093 = VECTOR('',#139094,1.); +#139094 = DIRECTION('',(0.,-1.,0.)); +#139095 = ORIENTED_EDGE('',*,*,#139096,.T.); +#139096 = EDGE_CURVE('',#139089,#139097,#139099,.T.); +#139097 = VERTEX_POINT('',#139098); +#139098 = CARTESIAN_POINT('',(100.950346,-118.68126,1.585)); +#139099 = LINE('',#139100,#139101); +#139100 = CARTESIAN_POINT('',(100.725,-118.679819,1.585)); +#139101 = VECTOR('',#139102,1.); +#139102 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#139103 = ORIENTED_EDGE('',*,*,#139104,.T.); +#139104 = EDGE_CURVE('',#139097,#139105,#139107,.T.); +#139105 = VERTEX_POINT('',#139106); +#139106 = CARTESIAN_POINT('',(100.935714,-118.829819,1.585)); +#139107 = CIRCLE('',#139108,7.500006711464E-02); +#139108 = AXIS2_PLACEMENT_3D('',#139109,#139110,#139111); +#139109 = CARTESIAN_POINT('',(100.93571406711,-118.7548189328,1.585)); +#139110 = DIRECTION('',(0.,0.,-1.)); +#139111 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#139112 = ORIENTED_EDGE('',*,*,#139113,.T.); +#139113 = EDGE_CURVE('',#139105,#139114,#139116,.T.); +#139114 = VERTEX_POINT('',#139115); +#139115 = CARTESIAN_POINT('',(100.349654,-118.828378,1.585)); +#139116 = LINE('',#139117,#139118); +#139117 = CARTESIAN_POINT('',(100.935714,-118.829819,1.585)); +#139118 = VECTOR('',#139119,1.); +#139119 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#139120 = ORIENTED_EDGE('',*,*,#139121,.T.); +#139121 = EDGE_CURVE('',#139114,#139122,#139124,.T.); +#139122 = VERTEX_POINT('',#139123); +#139123 = CARTESIAN_POINT('',(100.364286,-118.679819,1.585)); +#139124 = CIRCLE('',#139125,7.500006711463E-02); +#139125 = AXIS2_PLACEMENT_3D('',#139126,#139127,#139128); +#139126 = CARTESIAN_POINT('',(100.36428593288,-118.7548190671,1.585)); +#139127 = DIRECTION('',(0.,0.,-1.)); +#139128 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#139129 = ORIENTED_EDGE('',*,*,#139130,.T.); +#139130 = EDGE_CURVE('',#139122,#139131,#139133,.T.); +#139131 = VERTEX_POINT('',#139132); +#139132 = CARTESIAN_POINT('',(100.575,-118.679819,1.585)); +#139133 = LINE('',#139134,#139135); +#139134 = CARTESIAN_POINT('',(100.364286,-118.679819,1.585)); +#139135 = VECTOR('',#139136,1.); +#139136 = DIRECTION('',(1.,0.,0.)); +#139137 = ORIENTED_EDGE('',*,*,#139138,.T.); +#139138 = EDGE_CURVE('',#139131,#139139,#139141,.T.); +#139139 = VERTEX_POINT('',#139140); +#139140 = CARTESIAN_POINT('',(100.575,-117.983504,1.585)); +#139141 = LINE('',#139142,#139143); +#139142 = CARTESIAN_POINT('',(100.575,-118.679819,1.585)); +#139143 = VECTOR('',#139144,1.); +#139144 = DIRECTION('',(0.,1.,0.)); +#139145 = ORIENTED_EDGE('',*,*,#139146,.T.); +#139146 = EDGE_CURVE('',#139139,#139147,#139149,.T.); +#139147 = VERTEX_POINT('',#139148); +#139148 = CARTESIAN_POINT('',(100.499364,-118.056031,1.585)); +#139149 = LINE('',#139150,#139151); +#139150 = CARTESIAN_POINT('',(100.575,-117.983504,1.585)); +#139151 = VECTOR('',#139152,1.); +#139152 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#139153 = ORIENTED_EDGE('',*,*,#139154,.T.); +#139154 = EDGE_CURVE('',#139147,#139155,#139157,.T.); +#139155 = VERTEX_POINT('',#139156); +#139156 = CARTESIAN_POINT('',(100.384095,-118.11287,1.585)); +#139157 = LINE('',#139158,#139159); +#139158 = CARTESIAN_POINT('',(100.499364,-118.056031,1.585)); +#139159 = VECTOR('',#139160,1.); +#139160 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#139161 = ORIENTED_EDGE('',*,*,#139162,.T.); +#139162 = EDGE_CURVE('',#139155,#139163,#139165,.T.); +#139163 = VERTEX_POINT('',#139164); +#139164 = CARTESIAN_POINT('',(100.330745,-117.973451,1.585)); +#139165 = CIRCLE('',#139166,7.500005272362E-02); +#139166 = AXIS2_PLACEMENT_3D('',#139167,#139168,#139169); +#139167 = CARTESIAN_POINT('',(100.36428555676,-118.0405333297,1.585)); +#139168 = DIRECTION('',(0.,0.,-1.)); +#139169 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#139170 = ORIENTED_EDGE('',*,*,#139171,.T.); +#139171 = EDGE_CURVE('',#139163,#139172,#139174,.T.); +#139172 = VERTEX_POINT('',#139173); +#139173 = CARTESIAN_POINT('',(100.415097,-117.931275,1.585)); +#139174 = LINE('',#139175,#139176); +#139175 = CARTESIAN_POINT('',(100.330745,-117.973451,1.585)); +#139176 = VECTOR('',#139177,1.); +#139177 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#139178 = ORIENTED_EDGE('',*,*,#139179,.T.); +#139179 = EDGE_CURVE('',#139172,#139180,#139182,.T.); +#139180 = VERTEX_POINT('',#139181); +#139181 = CARTESIAN_POINT('',(100.496476,-117.849896,1.585)); +#139182 = LINE('',#139183,#139184); +#139183 = CARTESIAN_POINT('',(100.415097,-117.931275,1.585)); +#139184 = VECTOR('',#139185,1.); +#139185 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#139186 = ORIENTED_EDGE('',*,*,#139187,.T.); +#139187 = EDGE_CURVE('',#139180,#139062,#139188,.T.); +#139188 = LINE('',#139189,#139190); +#139189 = CARTESIAN_POINT('',(100.496476,-117.849896,1.585)); +#139190 = VECTOR('',#139191,1.); +#139191 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#139192 = PLANE('',#139193); +#139193 = AXIS2_PLACEMENT_3D('',#139194,#139195,#139196); +#139194 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139195 = DIRECTION('',(0.,0.,1.)); +#139196 = DIRECTION('',(1.,0.,-0.)); +#139197 = SHELL_BASED_SURFACE_MODEL('',(#139198)); +#139198 = OPEN_SHELL('',(#139199)); +#139199 = ADVANCED_FACE('',(#139200,#139316),#139399,.T.); +#139200 = FACE_BOUND('',#139201,.F.); +#139201 = EDGE_LOOP('',(#139202,#139213,#139221,#139229,#139237,#139245, + #139253,#139261,#139269,#139277,#139285,#139293,#139301,#139310)); +#139202 = ORIENTED_EDGE('',*,*,#139203,.T.); +#139203 = EDGE_CURVE('',#139204,#139206,#139208,.T.); +#139204 = VERTEX_POINT('',#139205); +#139205 = CARTESIAN_POINT('',(99.338346,-117.740187,1.585)); +#139206 = VERTEX_POINT('',#139207); +#139207 = CARTESIAN_POINT('',(99.411905,-117.679819,1.585)); +#139208 = CIRCLE('',#139209,7.500074938988E-02); +#139209 = AXIS2_PLACEMENT_3D('',#139210,#139211,#139212); +#139210 = CARTESIAN_POINT('',(99.41190546611,-117.7548197493,1.585)); +#139211 = DIRECTION('',(0.,0.,-1.)); +#139212 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#139213 = ORIENTED_EDGE('',*,*,#139214,.T.); +#139214 = EDGE_CURVE('',#139206,#139215,#139217,.T.); +#139215 = VERTEX_POINT('',#139216); +#139216 = CARTESIAN_POINT('',(99.657405,-117.680548,1.585)); +#139217 = LINE('',#139218,#139219); +#139218 = CARTESIAN_POINT('',(99.411905,-117.679819,1.585)); +#139219 = VECTOR('',#139220,1.); +#139220 = DIRECTION('',(0.999995591212,-2.969437010186E-03,0.)); +#139221 = ORIENTED_EDGE('',*,*,#139222,.T.); +#139222 = EDGE_CURVE('',#139215,#139223,#139225,.T.); +#139223 = VERTEX_POINT('',#139224); +#139224 = CARTESIAN_POINT('',(99.834525,-117.740078,1.585)); +#139225 = LINE('',#139226,#139227); +#139226 = CARTESIAN_POINT('',(99.657405,-117.680548,1.585)); +#139227 = VECTOR('',#139228,1.); +#139228 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#139229 = ORIENTED_EDGE('',*,*,#139230,.T.); +#139230 = EDGE_CURVE('',#139223,#139231,#139233,.T.); +#139231 = VERTEX_POINT('',#139232); +#139232 = CARTESIAN_POINT('',(99.951214,-117.85784,1.585)); +#139233 = LINE('',#139234,#139235); +#139234 = CARTESIAN_POINT('',(99.834525,-117.740078,1.585)); +#139235 = VECTOR('',#139236,1.); +#139236 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#139237 = ORIENTED_EDGE('',*,*,#139238,.T.); +#139238 = EDGE_CURVE('',#139231,#139239,#139241,.T.); +#139239 = VERTEX_POINT('',#139240); +#139240 = CARTESIAN_POINT('',(100.008475,-117.974724,1.585)); +#139241 = LINE('',#139242,#139243); +#139242 = CARTESIAN_POINT('',(99.951214,-117.85784,1.585)); +#139243 = VECTOR('',#139244,1.); +#139244 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#139245 = ORIENTED_EDGE('',*,*,#139246,.T.); +#139246 = EDGE_CURVE('',#139239,#139247,#139249,.T.); +#139247 = VERTEX_POINT('',#139248); +#139248 = CARTESIAN_POINT('',(100.058333,-118.18339,1.585)); +#139249 = LINE('',#139250,#139251); +#139250 = CARTESIAN_POINT('',(100.008475,-117.974724,1.585)); +#139251 = VECTOR('',#139252,1.); +#139252 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#139253 = ORIENTED_EDGE('',*,*,#139254,.T.); +#139254 = EDGE_CURVE('',#139247,#139255,#139257,.T.); +#139255 = VERTEX_POINT('',#139256); +#139256 = CARTESIAN_POINT('',(100.056094,-118.344437,1.585)); +#139257 = LINE('',#139258,#139259); +#139258 = CARTESIAN_POINT('',(100.058333,-118.18339,1.585)); +#139259 = VECTOR('',#139260,1.); +#139260 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#139261 = ORIENTED_EDGE('',*,*,#139262,.T.); +#139262 = EDGE_CURVE('',#139255,#139263,#139265,.T.); +#139263 = VERTEX_POINT('',#139264); +#139264 = CARTESIAN_POINT('',(100.002796,-118.550264,1.585)); +#139265 = LINE('',#139266,#139267); +#139266 = CARTESIAN_POINT('',(100.056094,-118.344437,1.585)); +#139267 = VECTOR('',#139268,1.); +#139268 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#139269 = ORIENTED_EDGE('',*,*,#139270,.T.); +#139270 = EDGE_CURVE('',#139263,#139271,#139273,.T.); +#139271 = VERTEX_POINT('',#139272); +#139272 = CARTESIAN_POINT('',(99.945846,-118.659244,1.585)); +#139273 = LINE('',#139274,#139275); +#139274 = CARTESIAN_POINT('',(100.002796,-118.550264,1.585)); +#139275 = VECTOR('',#139276,1.); +#139276 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#139277 = ORIENTED_EDGE('',*,*,#139278,.T.); +#139278 = EDGE_CURVE('',#139271,#139279,#139281,.T.); +#139279 = VERTEX_POINT('',#139280); +#139280 = CARTESIAN_POINT('',(99.829999,-118.772357,1.585)); +#139281 = LINE('',#139282,#139283); +#139282 = CARTESIAN_POINT('',(99.945846,-118.659244,1.585)); +#139283 = VECTOR('',#139284,1.); +#139284 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#139285 = ORIENTED_EDGE('',*,*,#139286,.T.); +#139286 = EDGE_CURVE('',#139279,#139287,#139289,.T.); +#139287 = VERTEX_POINT('',#139288); +#139288 = CARTESIAN_POINT('',(99.657405,-118.829089,1.585)); +#139289 = LINE('',#139290,#139291); +#139290 = CARTESIAN_POINT('',(99.829999,-118.772357,1.585)); +#139291 = VECTOR('',#139292,1.); +#139292 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#139293 = ORIENTED_EDGE('',*,*,#139294,.T.); +#139294 = EDGE_CURVE('',#139287,#139295,#139297,.T.); +#139295 = VERTEX_POINT('',#139296); +#139296 = CARTESIAN_POINT('',(99.397273,-118.828378,1.585)); +#139297 = LINE('',#139298,#139299); +#139298 = CARTESIAN_POINT('',(99.657405,-118.829089,1.585)); +#139299 = VECTOR('',#139300,1.); +#139300 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#139301 = ORIENTED_EDGE('',*,*,#139302,.T.); +#139302 = EDGE_CURVE('',#139295,#139303,#139305,.T.); +#139303 = VERTEX_POINT('',#139304); +#139304 = CARTESIAN_POINT('',(99.336905,-118.754819,1.585)); +#139305 = CIRCLE('',#139306,7.500074938988E-02); +#139306 = AXIS2_PLACEMENT_3D('',#139307,#139308,#139309); +#139307 = CARTESIAN_POINT('',(99.411905749388,-118.7548185338,1.585)); +#139308 = DIRECTION('',(0.,0.,-1.)); +#139309 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#139310 = ORIENTED_EDGE('',*,*,#139311,.T.); +#139311 = EDGE_CURVE('',#139303,#139204,#139312,.T.); +#139312 = LINE('',#139313,#139314); +#139313 = CARTESIAN_POINT('',(99.336905,-118.754819,1.585)); +#139314 = VECTOR('',#139315,1.); +#139315 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#139316 = FACE_BOUND('',#139317,.F.); +#139317 = EDGE_LOOP('',(#139318,#139328,#139336,#139344,#139352,#139360, + #139368,#139377,#139385,#139393)); +#139318 = ORIENTED_EDGE('',*,*,#139319,.T.); +#139319 = EDGE_CURVE('',#139320,#139322,#139324,.T.); +#139320 = VERTEX_POINT('',#139321); +#139321 = CARTESIAN_POINT('',(99.752343,-117.86799,1.585)); +#139322 = VERTEX_POINT('',#139323); +#139323 = CARTESIAN_POINT('',(99.63783,-117.829819,1.585)); +#139324 = LINE('',#139325,#139326); +#139325 = CARTESIAN_POINT('',(99.752343,-117.86799,1.585)); +#139326 = VECTOR('',#139327,1.); +#139327 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#139328 = ORIENTED_EDGE('',*,*,#139329,.T.); +#139329 = EDGE_CURVE('',#139322,#139330,#139332,.T.); +#139330 = VERTEX_POINT('',#139331); +#139331 = CARTESIAN_POINT('',(99.486905,-117.829819,1.585)); +#139332 = LINE('',#139333,#139334); +#139333 = CARTESIAN_POINT('',(99.63783,-117.829819,1.585)); +#139334 = VECTOR('',#139335,1.); +#139335 = DIRECTION('',(-1.,0.,0.)); +#139336 = ORIENTED_EDGE('',*,*,#139337,.T.); +#139337 = EDGE_CURVE('',#139330,#139338,#139340,.T.); +#139338 = VERTEX_POINT('',#139339); +#139339 = CARTESIAN_POINT('',(99.486905,-118.679819,1.585)); +#139340 = LINE('',#139341,#139342); +#139341 = CARTESIAN_POINT('',(99.486905,-117.829819,1.585)); +#139342 = VECTOR('',#139343,1.); +#139343 = DIRECTION('',(0.,-1.,0.)); +#139344 = ORIENTED_EDGE('',*,*,#139345,.T.); +#139345 = EDGE_CURVE('',#139338,#139346,#139348,.T.); +#139346 = VERTEX_POINT('',#139347); +#139347 = CARTESIAN_POINT('',(99.63783,-118.679819,1.585)); +#139348 = LINE('',#139349,#139350); +#139349 = CARTESIAN_POINT('',(99.486905,-118.679819,1.585)); +#139350 = VECTOR('',#139351,1.); +#139351 = DIRECTION('',(1.,0.,0.)); +#139352 = ORIENTED_EDGE('',*,*,#139353,.T.); +#139353 = EDGE_CURVE('',#139346,#139354,#139356,.T.); +#139354 = VERTEX_POINT('',#139355); +#139355 = CARTESIAN_POINT('',(99.752343,-118.641647,1.585)); +#139356 = LINE('',#139357,#139358); +#139357 = CARTESIAN_POINT('',(99.63783,-118.679819,1.585)); +#139358 = VECTOR('',#139359,1.); +#139359 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#139360 = ORIENTED_EDGE('',*,*,#139361,.T.); +#139361 = EDGE_CURVE('',#139354,#139362,#139364,.T.); +#139362 = VERTEX_POINT('',#139363); +#139363 = CARTESIAN_POINT('',(99.826455,-118.567534,1.585)); +#139364 = LINE('',#139365,#139366); +#139365 = CARTESIAN_POINT('',(99.752343,-118.641647,1.585)); +#139366 = VECTOR('',#139367,1.); +#139367 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#139368 = ORIENTED_EDGE('',*,*,#139369,.T.); +#139369 = EDGE_CURVE('',#139362,#139370,#139372,.T.); +#139370 = VERTEX_POINT('',#139371); +#139371 = CARTESIAN_POINT('',(99.908333,-118.192624,1.585)); +#139372 = CIRCLE('',#139373,0.611719141131); +#139373 = AXIS2_PLACEMENT_3D('',#139374,#139375,#139376); +#139374 = CARTESIAN_POINT('',(99.299920962243,-118.2561464364,1.585)); +#139375 = DIRECTION('',(0.,0.,1.)); +#139376 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#139377 = ORIENTED_EDGE('',*,*,#139378,.T.); +#139378 = EDGE_CURVE('',#139370,#139379,#139381,.T.); +#139379 = VERTEX_POINT('',#139380); +#139380 = CARTESIAN_POINT('',(99.864949,-118.01909,1.585)); +#139381 = LINE('',#139382,#139383); +#139382 = CARTESIAN_POINT('',(99.908333,-118.192624,1.585)); +#139383 = VECTOR('',#139384,1.); +#139384 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#139385 = ORIENTED_EDGE('',*,*,#139386,.T.); +#139386 = EDGE_CURVE('',#139379,#139387,#139389,.T.); +#139387 = VERTEX_POINT('',#139388); +#139388 = CARTESIAN_POINT('',(99.826456,-117.942103,1.585)); +#139389 = LINE('',#139390,#139391); +#139390 = CARTESIAN_POINT('',(99.864949,-118.01909,1.585)); +#139391 = VECTOR('',#139392,1.); +#139392 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#139393 = ORIENTED_EDGE('',*,*,#139394,.T.); +#139394 = EDGE_CURVE('',#139387,#139320,#139395,.T.); +#139395 = LINE('',#139396,#139397); +#139396 = CARTESIAN_POINT('',(99.826456,-117.942103,1.585)); +#139397 = VECTOR('',#139398,1.); +#139398 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#139399 = PLANE('',#139400); +#139400 = AXIS2_PLACEMENT_3D('',#139401,#139402,#139403); +#139401 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139402 = DIRECTION('',(0.,0.,1.)); +#139403 = DIRECTION('',(1.,0.,-0.)); +#139404 = SHELL_BASED_SURFACE_MODEL('',(#139405)); +#139405 = OPEN_SHELL('',(#139406)); +#139406 = ADVANCED_FACE('',(#139407),#139443,.T.); +#139407 = FACE_BOUND('',#139408,.F.); +#139408 = EDGE_LOOP('',(#139409,#139420,#139428,#139437)); +#139409 = ORIENTED_EDGE('',*,*,#139410,.T.); +#139410 = EDGE_CURVE('',#139411,#139413,#139415,.T.); +#139411 = VERTEX_POINT('',#139412); +#139412 = CARTESIAN_POINT('',(129.60165,-118.6681,1.585)); +#139413 = VERTEX_POINT('',#139414); +#139414 = CARTESIAN_POINT('',(129.60165,-118.5481,1.585)); +#139415 = CIRCLE('',#139416,6.000000000042E-02); +#139416 = AXIS2_PLACEMENT_3D('',#139417,#139418,#139419); +#139417 = CARTESIAN_POINT('',(129.60164977441,-118.6081,1.585)); +#139418 = DIRECTION('',(0.,0.,-1.)); +#139419 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#139420 = ORIENTED_EDGE('',*,*,#139421,.T.); +#139421 = EDGE_CURVE('',#139413,#139422,#139424,.T.); +#139422 = VERTEX_POINT('',#139423); +#139423 = CARTESIAN_POINT('',(131.02165,-118.5481,1.585)); +#139424 = LINE('',#139425,#139426); +#139425 = CARTESIAN_POINT('',(129.60165,-118.5481,1.585)); +#139426 = VECTOR('',#139427,1.); +#139427 = DIRECTION('',(1.,0.,0.)); +#139428 = ORIENTED_EDGE('',*,*,#139429,.T.); +#139429 = EDGE_CURVE('',#139422,#139430,#139432,.T.); +#139430 = VERTEX_POINT('',#139431); +#139431 = CARTESIAN_POINT('',(131.02165,-118.6681,1.585)); +#139432 = CIRCLE('',#139433,6.000000000042E-02); +#139433 = AXIS2_PLACEMENT_3D('',#139434,#139435,#139436); +#139434 = CARTESIAN_POINT('',(131.02165022558,-118.6081,1.585)); +#139435 = DIRECTION('',(0.,0.,-1.)); +#139436 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#139437 = ORIENTED_EDGE('',*,*,#139438,.T.); +#139438 = EDGE_CURVE('',#139430,#139411,#139439,.T.); +#139439 = LINE('',#139440,#139441); +#139440 = CARTESIAN_POINT('',(131.02165,-118.6681,1.585)); +#139441 = VECTOR('',#139442,1.); +#139442 = DIRECTION('',(-1.,0.,0.)); +#139443 = PLANE('',#139444); +#139444 = AXIS2_PLACEMENT_3D('',#139445,#139446,#139447); +#139445 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139446 = DIRECTION('',(0.,0.,1.)); +#139447 = DIRECTION('',(1.,0.,-0.)); +#139448 = SHELL_BASED_SURFACE_MODEL('',(#139449)); +#139449 = OPEN_SHELL('',(#139450)); +#139450 = ADVANCED_FACE('',(#139451),#139636,.T.); +#139451 = FACE_BOUND('',#139452,.F.); +#139452 = EDGE_LOOP('',(#139453,#139464,#139472,#139481,#139489,#139498, + #139506,#139515,#139523,#139531,#139539,#139548,#139556,#139565, + #139573,#139582,#139590,#139598,#139606,#139614,#139622,#139630)); +#139453 = ORIENTED_EDGE('',*,*,#139454,.T.); +#139454 = EDGE_CURVE('',#139455,#139457,#139459,.T.); +#139455 = VERTEX_POINT('',#139456); +#139456 = CARTESIAN_POINT('',(184.083078,-117.410381,1.585)); +#139457 = VERTEX_POINT('',#139458); +#139458 = CARTESIAN_POINT('',(184.542841,-117.413178,1.585)); +#139459 = CIRCLE('',#139460,0.460785175821); +#139460 = AXIS2_PLACEMENT_3D('',#139461,#139462,#139463); +#139461 = CARTESIAN_POINT('',(184.31053010897,-117.8111159702,1.585)); +#139462 = DIRECTION('',(0.,0.,-1.)); +#139463 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#139464 = ORIENTED_EDGE('',*,*,#139465,.T.); +#139465 = EDGE_CURVE('',#139457,#139466,#139468,.T.); +#139466 = VERTEX_POINT('',#139467); +#139467 = CARTESIAN_POINT('',(184.611152,-117.481489,1.585)); +#139468 = LINE('',#139469,#139470); +#139469 = CARTESIAN_POINT('',(184.542841,-117.413178,1.585)); +#139470 = VECTOR('',#139471,1.); +#139471 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#139472 = ORIENTED_EDGE('',*,*,#139473,.T.); +#139473 = EDGE_CURVE('',#139466,#139474,#139476,.T.); +#139474 = VERTEX_POINT('',#139475); +#139475 = CARTESIAN_POINT('',(184.495759,-117.57619,1.585)); +#139476 = CIRCLE('',#139477,7.500003178657E-02); +#139477 = AXIS2_PLACEMENT_3D('',#139478,#139479,#139480); +#139478 = CARTESIAN_POINT('',(184.54879156212,-117.5231565,1.585)); +#139479 = DIRECTION('',(0.,0.,-1.)); +#139480 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#139481 = ORIENTED_EDGE('',*,*,#139482,.T.); +#139482 = EDGE_CURVE('',#139474,#139483,#139485,.T.); +#139483 = VERTEX_POINT('',#139484); +#139484 = CARTESIAN_POINT('',(184.460659,-117.54109,1.585)); +#139485 = LINE('',#139486,#139487); +#139486 = CARTESIAN_POINT('',(184.495759,-117.57619,1.585)); +#139487 = VECTOR('',#139488,1.); +#139488 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#139489 = ORIENTED_EDGE('',*,*,#139490,.T.); +#139490 = EDGE_CURVE('',#139483,#139491,#139493,.T.); +#139491 = VERTEX_POINT('',#139492); +#139492 = CARTESIAN_POINT('',(184.160735,-117.54109,1.585)); +#139493 = CIRCLE('',#139494,0.299308637371); +#139494 = AXIS2_PLACEMENT_3D('',#139495,#139496,#139497); +#139495 = CARTESIAN_POINT('',(184.310697,-117.800121,1.585)); +#139496 = DIRECTION('',(0.,0.,1.)); +#139497 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#139498 = ORIENTED_EDGE('',*,*,#139499,.T.); +#139499 = EDGE_CURVE('',#139491,#139500,#139502,.T.); +#139500 = VERTEX_POINT('',#139501); +#139501 = CARTESIAN_POINT('',(184.086622,-117.615203,1.585)); +#139502 = LINE('',#139503,#139504); +#139503 = CARTESIAN_POINT('',(184.160735,-117.54109,1.585)); +#139504 = VECTOR('',#139505,1.); +#139505 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#139506 = ORIENTED_EDGE('',*,*,#139507,.T.); +#139507 = EDGE_CURVE('',#139500,#139508,#139510,.T.); +#139508 = VERTEX_POINT('',#139509); +#139509 = CARTESIAN_POINT('',(184.004745,-117.990113,1.585)); +#139510 = CIRCLE('',#139511,0.611712714363); +#139511 = AXIS2_PLACEMENT_3D('',#139512,#139513,#139514); +#139512 = CARTESIAN_POINT('',(184.61315027521,-117.9265876822,1.585)); +#139513 = DIRECTION('',(0.,0.,1.)); +#139514 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#139515 = ORIENTED_EDGE('',*,*,#139516,.T.); +#139516 = EDGE_CURVE('',#139508,#139517,#139519,.T.); +#139517 = VERTEX_POINT('',#139518); +#139518 = CARTESIAN_POINT('',(184.048128,-118.163647,1.585)); +#139519 = LINE('',#139520,#139521); +#139520 = CARTESIAN_POINT('',(184.004745,-117.990113,1.585)); +#139521 = VECTOR('',#139522,1.); +#139522 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#139523 = ORIENTED_EDGE('',*,*,#139524,.T.); +#139524 = EDGE_CURVE('',#139517,#139525,#139527,.T.); +#139525 = VERTEX_POINT('',#139526); +#139526 = CARTESIAN_POINT('',(184.086622,-118.240634,1.585)); +#139527 = LINE('',#139528,#139529); +#139528 = CARTESIAN_POINT('',(184.048128,-118.163647,1.585)); +#139529 = VECTOR('',#139530,1.); +#139530 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#139531 = ORIENTED_EDGE('',*,*,#139532,.T.); +#139532 = EDGE_CURVE('',#139525,#139533,#139535,.T.); +#139533 = VERTEX_POINT('',#139534); +#139534 = CARTESIAN_POINT('',(184.160735,-118.314748,1.585)); +#139535 = LINE('',#139536,#139537); +#139536 = CARTESIAN_POINT('',(184.086622,-118.240634,1.585)); +#139537 = VECTOR('',#139538,1.); +#139538 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#139539 = ORIENTED_EDGE('',*,*,#139540,.T.); +#139540 = EDGE_CURVE('',#139533,#139541,#139543,.T.); +#139541 = VERTEX_POINT('',#139542); +#139542 = CARTESIAN_POINT('',(184.460659,-118.314747,1.585)); +#139543 = CIRCLE('',#139544,0.299305962385); +#139544 = AXIS2_PLACEMENT_3D('',#139545,#139546,#139547); +#139545 = CARTESIAN_POINT('',(184.31069613635,-118.0557195909,1.585)); +#139546 = DIRECTION('',(0.,0.,1.)); +#139547 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#139548 = ORIENTED_EDGE('',*,*,#139549,.T.); +#139549 = EDGE_CURVE('',#139541,#139550,#139552,.T.); +#139550 = VERTEX_POINT('',#139551); +#139551 = CARTESIAN_POINT('',(184.507124,-118.27032,1.585)); +#139552 = LINE('',#139553,#139554); +#139553 = CARTESIAN_POINT('',(184.460659,-118.314747,1.585)); +#139554 = VECTOR('',#139555,1.); +#139555 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#139556 = ORIENTED_EDGE('',*,*,#139557,.T.); +#139557 = EDGE_CURVE('',#139550,#139558,#139560,.T.); +#139558 = VERTEX_POINT('',#139559); +#139559 = CARTESIAN_POINT('',(184.601825,-118.385713,1.585)); +#139560 = CIRCLE('',#139561,7.499993690111E-02); +#139561 = AXIS2_PLACEMENT_3D('',#139562,#139563,#139564); +#139562 = CARTESIAN_POINT('',(184.5487922483,-118.3326798237,1.585)); +#139563 = DIRECTION('',(0.,0.,-1.)); +#139564 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#139565 = ORIENTED_EDGE('',*,*,#139566,.T.); +#139566 = EDGE_CURVE('',#139558,#139567,#139569,.T.); +#139567 = VERTEX_POINT('',#139568); +#139568 = CARTESIAN_POINT('',(184.538315,-118.445457,1.585)); +#139569 = LINE('',#139570,#139571); +#139570 = CARTESIAN_POINT('',(184.601825,-118.385713,1.585)); +#139571 = VECTOR('',#139572,1.); +#139572 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#139573 = ORIENTED_EDGE('',*,*,#139574,.T.); +#139574 = EDGE_CURVE('',#139567,#139575,#139577,.T.); +#139575 = VERTEX_POINT('',#139576); +#139576 = CARTESIAN_POINT('',(184.078553,-118.442661,1.585)); +#139577 = CIRCLE('',#139578,0.461067828848); +#139578 = AXIS2_PLACEMENT_3D('',#139579,#139580,#139581); +#139579 = CARTESIAN_POINT('',(184.31086451268,-118.0443961335,1.585)); +#139580 = DIRECTION('',(-0.,0.,-1.)); +#139581 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#139582 = ORIENTED_EDGE('',*,*,#139583,.T.); +#139583 = EDGE_CURVE('',#139575,#139584,#139586,.T.); +#139584 = VERTEX_POINT('',#139585); +#139585 = CARTESIAN_POINT('',(183.961864,-118.324898,1.585)); +#139586 = LINE('',#139587,#139588); +#139587 = CARTESIAN_POINT('',(184.078553,-118.442661,1.585)); +#139588 = VECTOR('',#139589,1.); +#139589 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#139590 = ORIENTED_EDGE('',*,*,#139591,.T.); +#139591 = EDGE_CURVE('',#139584,#139592,#139594,.T.); +#139592 = VERTEX_POINT('',#139593); +#139593 = CARTESIAN_POINT('',(183.904603,-118.208013,1.585)); +#139594 = LINE('',#139595,#139596); +#139595 = CARTESIAN_POINT('',(183.961864,-118.324898,1.585)); +#139596 = VECTOR('',#139597,1.); +#139597 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#139598 = ORIENTED_EDGE('',*,*,#139599,.T.); +#139599 = EDGE_CURVE('',#139592,#139600,#139602,.T.); +#139600 = VERTEX_POINT('',#139601); +#139601 = CARTESIAN_POINT('',(183.854745,-117.999347,1.585)); +#139602 = LINE('',#139603,#139604); +#139603 = CARTESIAN_POINT('',(183.904603,-118.208013,1.585)); +#139604 = VECTOR('',#139605,1.); +#139605 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#139606 = ORIENTED_EDGE('',*,*,#139607,.T.); +#139607 = EDGE_CURVE('',#139600,#139608,#139610,.T.); +#139608 = VERTEX_POINT('',#139609); +#139609 = CARTESIAN_POINT('',(183.856984,-117.8383,1.585)); +#139610 = LINE('',#139611,#139612); +#139611 = CARTESIAN_POINT('',(183.854745,-117.999347,1.585)); +#139612 = VECTOR('',#139613,1.); +#139613 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#139614 = ORIENTED_EDGE('',*,*,#139615,.T.); +#139615 = EDGE_CURVE('',#139608,#139616,#139618,.T.); +#139616 = VERTEX_POINT('',#139617); +#139617 = CARTESIAN_POINT('',(183.910282,-117.632473,1.585)); +#139618 = LINE('',#139619,#139620); +#139619 = CARTESIAN_POINT('',(183.856984,-117.8383,1.585)); +#139620 = VECTOR('',#139621,1.); +#139621 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#139622 = ORIENTED_EDGE('',*,*,#139623,.T.); +#139623 = EDGE_CURVE('',#139616,#139624,#139626,.T.); +#139624 = VERTEX_POINT('',#139625); +#139625 = CARTESIAN_POINT('',(183.967231,-117.523492,1.585)); +#139626 = LINE('',#139627,#139628); +#139627 = CARTESIAN_POINT('',(183.910282,-117.632473,1.585)); +#139628 = VECTOR('',#139629,1.); +#139629 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#139630 = ORIENTED_EDGE('',*,*,#139631,.T.); +#139631 = EDGE_CURVE('',#139624,#139455,#139632,.T.); +#139632 = LINE('',#139633,#139634); +#139633 = CARTESIAN_POINT('',(183.967231,-117.523492,1.585)); +#139634 = VECTOR('',#139635,1.); +#139635 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#139636 = PLANE('',#139637); +#139637 = AXIS2_PLACEMENT_3D('',#139638,#139639,#139640); +#139638 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139639 = DIRECTION('',(0.,0.,1.)); +#139640 = DIRECTION('',(1.,0.,-0.)); +#139641 = SHELL_BASED_SURFACE_MODEL('',(#139642)); +#139642 = OPEN_SHELL('',(#139643)); +#139643 = ADVANCED_FACE('',(#139644),#139779,.T.); +#139644 = FACE_BOUND('',#139645,.F.); +#139645 = EDGE_LOOP('',(#139646,#139657,#139665,#139673,#139681,#139690, + #139698,#139706,#139715,#139723,#139731,#139740,#139748,#139756, + #139765,#139773)); +#139646 = ORIENTED_EDGE('',*,*,#139647,.T.); +#139647 = EDGE_CURVE('',#139648,#139650,#139652,.T.); +#139648 = VERTEX_POINT('',#139649); +#139649 = CARTESIAN_POINT('',(185.121857,-117.321051,1.585)); +#139650 = VERTEX_POINT('',#139651); +#139651 = CARTESIAN_POINT('',(185.238991,-117.404018,1.585)); +#139652 = CIRCLE('',#139653,7.499955990671E-02); +#139653 = AXIS2_PLACEMENT_3D('',#139654,#139655,#139656); +#139654 = CARTESIAN_POINT('',(185.16784050095,-117.3803000643,1.585)); +#139655 = DIRECTION('',(0.,0.,-1.)); +#139656 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#139657 = ORIENTED_EDGE('',*,*,#139658,.T.); +#139658 = EDGE_CURVE('',#139650,#139659,#139661,.T.); +#139659 = VERTEX_POINT('',#139660); +#139660 = CARTESIAN_POINT('',(185.033802,-118.019585,1.585)); +#139661 = LINE('',#139662,#139663); +#139662 = CARTESIAN_POINT('',(185.238991,-117.404018,1.585)); +#139663 = VECTOR('',#139664,1.); +#139664 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#139665 = ORIENTED_EDGE('',*,*,#139666,.T.); +#139666 = EDGE_CURVE('',#139659,#139667,#139669,.T.); +#139667 = VERTEX_POINT('',#139668); +#139668 = CARTESIAN_POINT('',(185.330935,-118.019585,1.585)); +#139669 = LINE('',#139670,#139671); +#139670 = CARTESIAN_POINT('',(185.033802,-118.019585,1.585)); +#139671 = VECTOR('',#139672,1.); +#139672 = DIRECTION('',(1.,0.,0.)); +#139673 = ORIENTED_EDGE('',*,*,#139674,.T.); +#139674 = EDGE_CURVE('',#139667,#139675,#139677,.T.); +#139675 = VERTEX_POINT('',#139676); +#139676 = CARTESIAN_POINT('',(185.332376,-117.74662,1.585)); +#139677 = LINE('',#139678,#139679); +#139678 = CARTESIAN_POINT('',(185.330935,-118.019585,1.585)); +#139679 = VECTOR('',#139680,1.); +#139680 = DIRECTION('',(5.278991523253E-03,0.999986066027,0.)); +#139681 = ORIENTED_EDGE('',*,*,#139682,.T.); +#139682 = EDGE_CURVE('',#139675,#139683,#139685,.T.); +#139683 = VERTEX_POINT('',#139684); +#139684 = CARTESIAN_POINT('',(185.480935,-117.761252,1.585)); +#139685 = CIRCLE('',#139686,7.500006711463E-02); +#139686 = AXIS2_PLACEMENT_3D('',#139687,#139688,#139689); +#139687 = CARTESIAN_POINT('',(185.40593493288,-117.7612519328,1.585)); +#139688 = DIRECTION('',(0.,0.,-1.)); +#139689 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#139690 = ORIENTED_EDGE('',*,*,#139691,.T.); +#139691 = EDGE_CURVE('',#139683,#139692,#139694,.T.); +#139692 = VERTEX_POINT('',#139693); +#139693 = CARTESIAN_POINT('',(185.480935,-118.019585,1.585)); +#139694 = LINE('',#139695,#139696); +#139695 = CARTESIAN_POINT('',(185.480935,-117.761252,1.585)); +#139696 = VECTOR('',#139697,1.); +#139697 = DIRECTION('',(0.,-1.,0.)); +#139698 = ORIENTED_EDGE('',*,*,#139699,.T.); +#139699 = EDGE_CURVE('',#139692,#139700,#139702,.T.); +#139700 = VERTEX_POINT('',#139701); +#139701 = CARTESIAN_POINT('',(185.563424,-118.021026,1.585)); +#139702 = LINE('',#139703,#139704); +#139703 = CARTESIAN_POINT('',(185.480935,-118.019585,1.585)); +#139704 = VECTOR('',#139705,1.); +#139705 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#139706 = ORIENTED_EDGE('',*,*,#139707,.T.); +#139707 = EDGE_CURVE('',#139700,#139708,#139710,.T.); +#139708 = VERTEX_POINT('',#139709); +#139709 = CARTESIAN_POINT('',(185.548792,-118.169585,1.585)); +#139710 = CIRCLE('',#139711,7.500006711462E-02); +#139711 = AXIS2_PLACEMENT_3D('',#139712,#139713,#139714); +#139712 = CARTESIAN_POINT('',(185.54879206711,-118.0945849328,1.585)); +#139713 = DIRECTION('',(0.,0.,-1.)); +#139714 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#139715 = ORIENTED_EDGE('',*,*,#139716,.T.); +#139716 = EDGE_CURVE('',#139708,#139717,#139719,.T.); +#139717 = VERTEX_POINT('',#139718); +#139718 = CARTESIAN_POINT('',(185.480935,-118.169585,1.585)); +#139719 = LINE('',#139720,#139721); +#139720 = CARTESIAN_POINT('',(185.548792,-118.169585,1.585)); +#139721 = VECTOR('',#139722,1.); +#139722 = DIRECTION('',(-1.,0.,0.)); +#139723 = ORIENTED_EDGE('',*,*,#139724,.T.); +#139724 = EDGE_CURVE('',#139717,#139725,#139727,.T.); +#139725 = VERTEX_POINT('',#139726); +#139726 = CARTESIAN_POINT('',(185.479494,-118.442551,1.585)); +#139727 = LINE('',#139728,#139729); +#139728 = CARTESIAN_POINT('',(185.480935,-118.169585,1.585)); +#139729 = VECTOR('',#139730,1.); +#139730 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#139731 = ORIENTED_EDGE('',*,*,#139732,.T.); +#139732 = EDGE_CURVE('',#139725,#139733,#139735,.T.); +#139733 = VERTEX_POINT('',#139734); +#139734 = CARTESIAN_POINT('',(185.330935,-118.427919,1.585)); +#139735 = CIRCLE('',#139736,7.500006711462E-02); +#139736 = AXIS2_PLACEMENT_3D('',#139737,#139738,#139739); +#139737 = CARTESIAN_POINT('',(185.40593506711,-118.4279190671,1.585)); +#139738 = DIRECTION('',(-0.,0.,-1.)); +#139739 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#139740 = ORIENTED_EDGE('',*,*,#139741,.T.); +#139741 = EDGE_CURVE('',#139733,#139742,#139744,.T.); +#139742 = VERTEX_POINT('',#139743); +#139743 = CARTESIAN_POINT('',(185.330935,-118.169585,1.585)); +#139744 = LINE('',#139745,#139746); +#139745 = CARTESIAN_POINT('',(185.330935,-118.427919,1.585)); +#139746 = VECTOR('',#139747,1.); +#139747 = DIRECTION('',(0.,1.,0.)); +#139748 = ORIENTED_EDGE('',*,*,#139749,.T.); +#139749 = EDGE_CURVE('',#139742,#139750,#139752,.T.); +#139750 = VERTEX_POINT('',#139751); +#139751 = CARTESIAN_POINT('',(184.915113,-118.168144,1.585)); +#139752 = LINE('',#139753,#139754); +#139753 = CARTESIAN_POINT('',(185.330935,-118.169585,1.585)); +#139754 = VECTOR('',#139755,1.); +#139755 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#139756 = ORIENTED_EDGE('',*,*,#139757,.T.); +#139757 = EDGE_CURVE('',#139750,#139758,#139760,.T.); +#139758 = VERTEX_POINT('',#139759); +#139759 = CARTESIAN_POINT('',(184.858594,-118.070868,1.585)); +#139760 = CIRCLE('',#139761,7.499997045039E-02); +#139761 = AXIS2_PLACEMENT_3D('',#139762,#139763,#139764); +#139762 = CARTESIAN_POINT('',(184.92974517257,-118.0945852133,1.585)); +#139763 = DIRECTION('',(0.,0.,-1.)); +#139764 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#139765 = ORIENTED_EDGE('',*,*,#139766,.T.); +#139766 = EDGE_CURVE('',#139758,#139767,#139769,.T.); +#139767 = VERTEX_POINT('',#139768); +#139768 = CARTESIAN_POINT('',(185.102683,-117.343158,1.585)); +#139769 = LINE('',#139770,#139771); +#139770 = CARTESIAN_POINT('',(184.858594,-118.070868,1.585)); +#139771 = VECTOR('',#139772,1.); +#139772 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#139773 = ORIENTED_EDGE('',*,*,#139774,.T.); +#139774 = EDGE_CURVE('',#139767,#139648,#139775,.T.); +#139775 = LINE('',#139776,#139777); +#139776 = CARTESIAN_POINT('',(185.102683,-117.343158,1.585)); +#139777 = VECTOR('',#139778,1.); +#139778 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#139779 = PLANE('',#139780); +#139780 = AXIS2_PLACEMENT_3D('',#139781,#139782,#139783); +#139781 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139782 = DIRECTION('',(0.,0.,1.)); +#139783 = DIRECTION('',(1.,0.,-0.)); +#139784 = SHELL_BASED_SURFACE_MODEL('',(#139785)); +#139785 = OPEN_SHELL('',(#139786)); +#139786 = ADVANCED_FACE('',(#139787),#139973,.T.); +#139787 = FACE_BOUND('',#139788,.F.); +#139788 = EDGE_LOOP('',(#139789,#139800,#139808,#139817,#139825,#139833, + #139842,#139850,#139859,#139867,#139875,#139883,#139892,#139900, + #139909,#139917,#139926,#139934,#139942,#139950,#139959,#139967)); +#139789 = ORIENTED_EDGE('',*,*,#139790,.T.); +#139790 = EDGE_CURVE('',#139791,#139793,#139795,.T.); +#139791 = VERTEX_POINT('',#139792); +#139792 = CARTESIAN_POINT('',(185.819875,-117.501478,1.585)); +#139793 = VERTEX_POINT('',#139794); +#139794 = CARTESIAN_POINT('',(185.834507,-117.352919,1.585)); +#139795 = CIRCLE('',#139796,7.500006711464E-02); +#139796 = AXIS2_PLACEMENT_3D('',#139797,#139798,#139799); +#139797 = CARTESIAN_POINT('',(185.83450693288,-117.4279190671,1.585)); +#139798 = DIRECTION('',(0.,0.,-1.)); +#139799 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#139800 = ORIENTED_EDGE('',*,*,#139801,.T.); +#139801 = EDGE_CURVE('',#139793,#139802,#139804,.T.); +#139802 = VERTEX_POINT('',#139803); +#139803 = CARTESIAN_POINT('',(186.461292,-117.353681,1.585)); +#139804 = LINE('',#139805,#139806); +#139805 = CARTESIAN_POINT('',(185.834507,-117.352919,1.585)); +#139806 = VECTOR('',#139807,1.); +#139807 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#139808 = ORIENTED_EDGE('',*,*,#139809,.T.); +#139809 = EDGE_CURVE('',#139802,#139810,#139812,.T.); +#139810 = VERTEX_POINT('',#139811); +#139811 = CARTESIAN_POINT('',(186.527113,-117.442551,1.585)); +#139812 = CIRCLE('',#139813,7.447391611624E-02); +#139813 = AXIS2_PLACEMENT_3D('',#139814,#139815,#139816); +#139814 = CARTESIAN_POINT('',(186.45411292664,-117.4278080874,1.585)); +#139815 = DIRECTION('',(0.,0.,-1.)); +#139816 = DIRECTION('',(9.639715124738E-02,0.995342950561,0.)); +#139817 = ORIENTED_EDGE('',*,*,#139818,.T.); +#139818 = EDGE_CURVE('',#139810,#139819,#139821,.T.); +#139819 = VERTEX_POINT('',#139820); +#139820 = CARTESIAN_POINT('',(186.509997,-117.477307,1.585)); +#139821 = LINE('',#139822,#139823); +#139822 = CARTESIAN_POINT('',(186.527113,-117.442551,1.585)); +#139823 = VECTOR('',#139824,1.); +#139824 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#139825 = ORIENTED_EDGE('',*,*,#139826,.T.); +#139826 = EDGE_CURVE('',#139819,#139827,#139829,.T.); +#139827 = VERTEX_POINT('',#139828); +#139828 = CARTESIAN_POINT('',(186.283101,-117.736616,1.585)); +#139829 = LINE('',#139830,#139831); +#139830 = CARTESIAN_POINT('',(186.509997,-117.477307,1.585)); +#139831 = VECTOR('',#139832,1.); +#139832 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#139833 = ORIENTED_EDGE('',*,*,#139834,.T.); +#139834 = EDGE_CURVE('',#139827,#139835,#139837,.T.); +#139835 = VERTEX_POINT('',#139836); +#139836 = CARTESIAN_POINT('',(186.527113,-117.984715,1.585)); +#139837 = CIRCLE('',#139838,0.348520834816); +#139838 = AXIS2_PLACEMENT_3D('',#139839,#139840,#139841); +#139839 = CARTESIAN_POINT('',(186.1898076174,-118.0724181993,1.585)); +#139840 = DIRECTION('',(0.,0.,-1.)); +#139841 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#139842 = ORIENTED_EDGE('',*,*,#139843,.T.); +#139843 = EDGE_CURVE('',#139835,#139844,#139846,.T.); +#139844 = VERTEX_POINT('',#139845); +#139845 = CARTESIAN_POINT('',(186.525891,-118.257252,1.585)); +#139846 = LINE('',#139847,#139848); +#139847 = CARTESIAN_POINT('',(186.527113,-117.984715,1.585)); +#139848 = VECTOR('',#139849,1.); +#139849 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#139850 = ORIENTED_EDGE('',*,*,#139851,.T.); +#139851 = EDGE_CURVE('',#139844,#139852,#139854,.T.); +#139852 = VERTEX_POINT('',#139853); +#139853 = CARTESIAN_POINT('',(186.27771,-118.501478,1.585)); +#139854 = CIRCLE('',#139855,0.348635327447); +#139855 = AXIS2_PLACEMENT_3D('',#139856,#139857,#139858); +#139856 = CARTESIAN_POINT('',(186.18993848129,-118.1640720841,1.585)); +#139857 = DIRECTION('',(0.,0.,-1.)); +#139858 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#139859 = ORIENTED_EDGE('',*,*,#139860,.T.); +#139860 = EDGE_CURVE('',#139852,#139861,#139863,.T.); +#139861 = VERTEX_POINT('',#139862); +#139862 = CARTESIAN_POINT('',(185.957554,-118.500256,1.585)); +#139863 = LINE('',#139864,#139865); +#139864 = CARTESIAN_POINT('',(186.27771,-118.501478,1.585)); +#139865 = VECTOR('',#139866,1.); +#139866 = DIRECTION('',(-0.999992715758,3.816861463376E-03,0.)); +#139867 = ORIENTED_EDGE('',*,*,#139868,.T.); +#139868 = EDGE_CURVE('',#139861,#139869,#139871,.T.); +#139869 = VERTEX_POINT('',#139870); +#139870 = CARTESIAN_POINT('',(185.834841,-118.43805,1.585)); +#139871 = LINE('',#139872,#139873); +#139872 = CARTESIAN_POINT('',(185.957554,-118.500256,1.585)); +#139873 = VECTOR('',#139874,1.); +#139874 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#139875 = ORIENTED_EDGE('',*,*,#139876,.T.); +#139876 = EDGE_CURVE('',#139869,#139877,#139879,.T.); +#139877 = VERTEX_POINT('',#139878); +#139878 = CARTESIAN_POINT('',(185.772146,-118.374347,1.585)); +#139879 = LINE('',#139880,#139881); +#139880 = CARTESIAN_POINT('',(185.834841,-118.43805,1.585)); +#139881 = VECTOR('',#139882,1.); +#139882 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#139883 = ORIENTED_EDGE('',*,*,#139884,.T.); +#139884 = EDGE_CURVE('',#139877,#139885,#139887,.T.); +#139885 = VERTEX_POINT('',#139886); +#139886 = CARTESIAN_POINT('',(185.887541,-118.279648,1.585)); +#139887 = CIRCLE('',#139888,7.50001266804E-02); +#139888 = AXIS2_PLACEMENT_3D('',#139889,#139890,#139891); +#139889 = CARTESIAN_POINT('',(185.83450705199,-118.3326802483,1.585)); +#139890 = DIRECTION('',(0.,0.,-1.)); +#139891 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#139892 = ORIENTED_EDGE('',*,*,#139893,.T.); +#139893 = EDGE_CURVE('',#139885,#139894,#139896,.T.); +#139894 = VERTEX_POINT('',#139895); +#139895 = CARTESIAN_POINT('',(185.926553,-118.318661,1.585)); +#139896 = LINE('',#139897,#139898); +#139897 = CARTESIAN_POINT('',(185.887541,-118.279648,1.585)); +#139898 = VECTOR('',#139899,1.); +#139899 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#139900 = ORIENTED_EDGE('',*,*,#139901,.T.); +#139901 = EDGE_CURVE('',#139894,#139902,#139904,.T.); +#139902 = VERTEX_POINT('',#139903); +#139903 = CARTESIAN_POINT('',(186.313888,-118.318661,1.585)); +#139904 = CIRCLE('',#139905,0.358502380266); +#139905 = AXIS2_PLACEMENT_3D('',#139906,#139907,#139908); +#139906 = CARTESIAN_POINT('',(186.1202205,-118.016971,1.585)); +#139907 = DIRECTION('',(0.,0.,1.)); +#139908 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#139909 = ORIENTED_EDGE('',*,*,#139910,.T.); +#139910 = EDGE_CURVE('',#139902,#139911,#139913,.T.); +#139911 = VERTEX_POINT('',#139912); +#139912 = CARTESIAN_POINT('',(186.344295,-118.288253,1.585)); +#139913 = LINE('',#139914,#139915); +#139914 = CARTESIAN_POINT('',(186.313888,-118.318661,1.585)); +#139915 = VECTOR('',#139916,1.); +#139916 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#139917 = ORIENTED_EDGE('',*,*,#139918,.T.); +#139918 = EDGE_CURVE('',#139911,#139919,#139921,.T.); +#139919 = VERTEX_POINT('',#139920); +#139920 = CARTESIAN_POINT('',(186.344296,-117.948536,1.585)); +#139921 = CIRCLE('',#139922,0.305616146029); +#139922 = AXIS2_PLACEMENT_3D('',#139923,#139924,#139925); +#139923 = CARTESIAN_POINT('',(186.09022992049,-118.1183937521,1.585)); +#139924 = DIRECTION('',(0.,-0.,1.)); +#139925 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#139926 = ORIENTED_EDGE('',*,*,#139927,.T.); +#139927 = EDGE_CURVE('',#139919,#139928,#139930,.T.); +#139928 = VERTEX_POINT('',#139929); +#139929 = CARTESIAN_POINT('',(186.313889,-117.918129,1.585)); +#139930 = LINE('',#139931,#139932); +#139931 = CARTESIAN_POINT('',(186.344296,-117.948536,1.585)); +#139932 = VECTOR('',#139933,1.); +#139933 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#139934 = ORIENTED_EDGE('',*,*,#139935,.T.); +#139935 = EDGE_CURVE('',#139928,#139936,#139938,.T.); +#139936 = VERTEX_POINT('',#139937); +#139937 = CARTESIAN_POINT('',(186.245373,-117.883871,1.585)); +#139938 = LINE('',#139939,#139940); +#139939 = CARTESIAN_POINT('',(186.313889,-117.918129,1.585)); +#139940 = VECTOR('',#139941,1.); +#139941 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#139942 = ORIENTED_EDGE('',*,*,#139943,.T.); +#139943 = EDGE_CURVE('',#139936,#139944,#139946,.T.); +#139944 = VERTEX_POINT('',#139945); +#139945 = CARTESIAN_POINT('',(186.105589,-117.88243,1.585)); +#139946 = LINE('',#139947,#139948); +#139947 = CARTESIAN_POINT('',(186.245373,-117.883871,1.585)); +#139948 = VECTOR('',#139949,1.); +#139949 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#139950 = ORIENTED_EDGE('',*,*,#139951,.T.); +#139951 = EDGE_CURVE('',#139944,#139952,#139954,.T.); +#139952 = VERTEX_POINT('',#139953); +#139953 = CARTESIAN_POINT('',(186.063778,-117.759483,1.585)); +#139954 = CIRCLE('',#139955,7.500015628753E-02); +#139955 = AXIS2_PLACEMENT_3D('',#139956,#139957,#139958); +#139956 = CARTESIAN_POINT('',(186.12022128432,-117.8088710461,1.585)); +#139957 = DIRECTION('',(0.,0.,-1.)); +#139958 = DIRECTION('',(-0.195096717784,-0.980784008184,-0.)); +#139959 = ORIENTED_EDGE('',*,*,#139960,.T.); +#139960 = EDGE_CURVE('',#139952,#139961,#139963,.T.); +#139961 = VERTEX_POINT('',#139962); +#139962 = CARTESIAN_POINT('',(186.288272,-117.502919,1.585)); +#139963 = LINE('',#139964,#139965); +#139964 = CARTESIAN_POINT('',(186.063778,-117.759483,1.585)); +#139965 = VECTOR('',#139966,1.); +#139966 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#139967 = ORIENTED_EDGE('',*,*,#139968,.T.); +#139968 = EDGE_CURVE('',#139961,#139791,#139969,.T.); +#139969 = LINE('',#139970,#139971); +#139970 = CARTESIAN_POINT('',(186.288272,-117.502919,1.585)); +#139971 = VECTOR('',#139972,1.); +#139972 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#139973 = PLANE('',#139974); +#139974 = AXIS2_PLACEMENT_3D('',#139975,#139976,#139977); +#139975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#139976 = DIRECTION('',(0.,0.,1.)); +#139977 = DIRECTION('',(1.,0.,-0.)); +#139978 = SHELL_BASED_SURFACE_MODEL('',(#139979)); +#139979 = OPEN_SHELL('',(#139980)); +#139980 = ADVANCED_FACE('',(#139981),#140041,.T.); +#139981 = FACE_BOUND('',#139982,.F.); +#139982 = EDGE_LOOP('',(#139983,#139994,#140002,#140011,#140019,#140027, + #140035)); +#139983 = ORIENTED_EDGE('',*,*,#139984,.T.); +#139984 = EDGE_CURVE('',#139985,#139987,#139989,.T.); +#139985 = VERTEX_POINT('',#139986); +#139986 = CARTESIAN_POINT('',(122.71165,-117.7831,1.585)); +#139987 = VERTEX_POINT('',#139988); +#139988 = CARTESIAN_POINT('',(122.669224,-117.680674,1.585)); +#139989 = CIRCLE('',#139990,6.000000000553E-02); +#139990 = AXIS2_PLACEMENT_3D('',#139991,#139992,#139993); +#139991 = CARTESIAN_POINT('',(122.71165081374,-117.7231,1.585)); +#139992 = DIRECTION('',(0.,0.,-1.)); +#139993 = DIRECTION('',(-1.356243828229E-05,-0.999999999908,-0.)); +#139994 = ORIENTED_EDGE('',*,*,#139995,.T.); +#139995 = EDGE_CURVE('',#139987,#139996,#139998,.T.); +#139996 = VERTEX_POINT('',#139997); +#139997 = CARTESIAN_POINT('',(122.949224,-117.400674,1.585)); +#139998 = LINE('',#139999,#140000); +#139999 = CARTESIAN_POINT('',(122.669224,-117.680674,1.585)); +#140000 = VECTOR('',#140001,1.); +#140001 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140002 = ORIENTED_EDGE('',*,*,#140003,.T.); +#140003 = EDGE_CURVE('',#139996,#140004,#140006,.T.); +#140004 = VERTEX_POINT('',#140005); +#140005 = CARTESIAN_POINT('',(123.05165,-117.4431,1.585)); +#140006 = CIRCLE('',#140007,6.000000000552E-02); +#140007 = AXIS2_PLACEMENT_3D('',#140008,#140009,#140010); +#140008 = CARTESIAN_POINT('',(122.99165,-117.4431008137,1.585)); +#140009 = DIRECTION('',(0.,0.,-1.)); +#140010 = DIRECTION('',(-0.707099999935,0.707113562373,0.)); +#140011 = ORIENTED_EDGE('',*,*,#140012,.T.); +#140012 = EDGE_CURVE('',#140004,#140013,#140015,.T.); +#140013 = VERTEX_POINT('',#140014); +#140014 = CARTESIAN_POINT('',(123.05165,-117.7231,1.585)); +#140015 = LINE('',#140016,#140017); +#140016 = CARTESIAN_POINT('',(123.05165,-117.4431,1.585)); +#140017 = VECTOR('',#140018,1.); +#140018 = DIRECTION('',(0.,-1.,0.)); +#140019 = ORIENTED_EDGE('',*,*,#140020,.T.); +#140020 = EDGE_CURVE('',#140013,#140021,#140023,.T.); +#140021 = VERTEX_POINT('',#140022); +#140022 = CARTESIAN_POINT('',(123.034076,-117.765526,1.585)); +#140023 = LINE('',#140024,#140025); +#140024 = CARTESIAN_POINT('',(123.05165,-117.7231,1.585)); +#140025 = VECTOR('',#140026,1.); +#140026 = DIRECTION('',(-0.382694127414,-0.923875102405,0.)); +#140027 = ORIENTED_EDGE('',*,*,#140028,.T.); +#140028 = EDGE_CURVE('',#140021,#140029,#140031,.T.); +#140029 = VERTEX_POINT('',#140030); +#140030 = CARTESIAN_POINT('',(122.99165,-117.7831,1.585)); +#140031 = LINE('',#140032,#140033); +#140032 = CARTESIAN_POINT('',(123.034076,-117.765526,1.585)); +#140033 = VECTOR('',#140034,1.); +#140034 = DIRECTION('',(-0.923875102404,-0.382694127414,0.)); +#140035 = ORIENTED_EDGE('',*,*,#140036,.T.); +#140036 = EDGE_CURVE('',#140029,#139985,#140037,.T.); +#140037 = LINE('',#140038,#140039); +#140038 = CARTESIAN_POINT('',(122.99165,-117.7831,1.585)); +#140039 = VECTOR('',#140040,1.); +#140040 = DIRECTION('',(-1.,0.,0.)); +#140041 = PLANE('',#140042); +#140042 = AXIS2_PLACEMENT_3D('',#140043,#140044,#140045); +#140043 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140044 = DIRECTION('',(0.,0.,1.)); +#140045 = DIRECTION('',(1.,0.,-0.)); +#140046 = SHELL_BASED_SURFACE_MODEL('',(#140047)); +#140047 = OPEN_SHELL('',(#140048)); +#140048 = ADVANCED_FACE('',(#140049),#140119,.T.); +#140049 = FACE_BOUND('',#140050,.F.); +#140050 = EDGE_LOOP('',(#140051,#140062,#140070,#140079,#140087,#140096, + #140104,#140113)); +#140051 = ORIENTED_EDGE('',*,*,#140052,.T.); +#140052 = EDGE_CURVE('',#140053,#140055,#140057,.T.); +#140053 = VERTEX_POINT('',#140054); +#140054 = CARTESIAN_POINT('',(82.753265,-117.039565,1.585)); +#140055 = VERTEX_POINT('',#140056); +#140056 = CARTESIAN_POINT('',(82.919936,-117.039565,1.585)); +#140057 = CIRCLE('',#140058,0.150002924038); +#140058 = AXIS2_PLACEMENT_3D('',#140059,#140060,#140061); +#140059 = CARTESIAN_POINT('',(82.8366005,-117.1642889818,1.585)); +#140060 = DIRECTION('',(0.,0.,-1.)); +#140061 = DIRECTION('',(-0.555559170159,0.831477004163,0.)); +#140062 = ORIENTED_EDGE('',*,*,#140063,.T.); +#140063 = EDGE_CURVE('',#140055,#140064,#140066,.T.); +#140064 = VERTEX_POINT('',#140065); +#140065 = CARTESIAN_POINT('',(83.08513,-117.204759,1.585)); +#140066 = LINE('',#140067,#140068); +#140067 = CARTESIAN_POINT('',(82.919936,-117.039565,1.585)); +#140068 = VECTOR('',#140069,1.); +#140069 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140070 = ORIENTED_EDGE('',*,*,#140071,.T.); +#140071 = EDGE_CURVE('',#140064,#140072,#140074,.T.); +#140072 = VERTEX_POINT('',#140073); +#140073 = CARTESIAN_POINT('',(83.08513,-117.37143,1.585)); +#140074 = CIRCLE('',#140075,0.150002924038); +#140075 = AXIS2_PLACEMENT_3D('',#140076,#140077,#140078); +#140076 = CARTESIAN_POINT('',(82.960406018105,-117.2880945,1.585)); +#140077 = DIRECTION('',(0.,0.,-1.)); +#140078 = DIRECTION('',(0.831477004163,0.555559170159,0.)); +#140079 = ORIENTED_EDGE('',*,*,#140080,.T.); +#140080 = EDGE_CURVE('',#140072,#140081,#140083,.T.); +#140081 = VERTEX_POINT('',#140082); +#140082 = CARTESIAN_POINT('',(82.919936,-117.536626,1.585)); +#140083 = LINE('',#140084,#140085); +#140084 = CARTESIAN_POINT('',(83.08513,-117.37143,1.585)); +#140085 = VECTOR('',#140086,1.); +#140086 = DIRECTION('',(-0.707102500737,-0.707111061611,0.)); +#140087 = ORIENTED_EDGE('',*,*,#140088,.T.); +#140088 = EDGE_CURVE('',#140081,#140089,#140091,.T.); +#140089 = VERTEX_POINT('',#140090); +#140090 = CARTESIAN_POINT('',(82.753265,-117.536626,1.585)); +#140091 = CIRCLE('',#140092,0.150001837666); +#140092 = AXIS2_PLACEMENT_3D('',#140093,#140094,#140095); +#140093 = CARTESIAN_POINT('',(82.8366005,-117.4119033246,1.585)); +#140094 = DIRECTION('',(-0.,0.,-1.)); +#140095 = DIRECTION('',(0.555563193735,-0.831474315759,-0.)); +#140096 = ORIENTED_EDGE('',*,*,#140097,.T.); +#140097 = EDGE_CURVE('',#140089,#140098,#140100,.T.); +#140098 = VERTEX_POINT('',#140099); +#140099 = CARTESIAN_POINT('',(82.588069,-117.37143,1.585)); +#140100 = LINE('',#140101,#140102); +#140101 = CARTESIAN_POINT('',(82.753265,-117.536626,1.585)); +#140102 = VECTOR('',#140103,1.); +#140103 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#140104 = ORIENTED_EDGE('',*,*,#140105,.T.); +#140105 = EDGE_CURVE('',#140098,#140106,#140108,.T.); +#140106 = VERTEX_POINT('',#140107); +#140107 = CARTESIAN_POINT('',(82.588069,-117.204759,1.585)); +#140108 = CIRCLE('',#140109,0.150001837666); +#140109 = AXIS2_PLACEMENT_3D('',#140110,#140111,#140112); +#140110 = CARTESIAN_POINT('',(82.712791675336,-117.2880945,1.585)); +#140111 = DIRECTION('',(0.,0.,-1.)); +#140112 = DIRECTION('',(-0.831474315759,-0.555563193736,-0.)); +#140113 = ORIENTED_EDGE('',*,*,#140114,.T.); +#140114 = EDGE_CURVE('',#140106,#140053,#140115,.T.); +#140115 = LINE('',#140116,#140117); +#140116 = CARTESIAN_POINT('',(82.588069,-117.204759,1.585)); +#140117 = VECTOR('',#140118,1.); +#140118 = DIRECTION('',(0.707111061611,0.707102500737,0.)); +#140119 = PLANE('',#140120); +#140120 = AXIS2_PLACEMENT_3D('',#140121,#140122,#140123); +#140121 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140122 = DIRECTION('',(0.,0.,1.)); +#140123 = DIRECTION('',(1.,0.,-0.)); +#140124 = SHELL_BASED_SURFACE_MODEL('',(#140125)); +#140125 = OPEN_SHELL('',(#140126)); +#140126 = ADVANCED_FACE('',(#140127),#140163,.T.); +#140127 = FACE_BOUND('',#140128,.F.); +#140128 = EDGE_LOOP('',(#140129,#140140,#140148,#140157)); +#140129 = ORIENTED_EDGE('',*,*,#140130,.T.); +#140130 = EDGE_CURVE('',#140131,#140133,#140135,.T.); +#140131 = VERTEX_POINT('',#140132); +#140132 = CARTESIAN_POINT('',(123.44165,-117.5231,1.585)); +#140133 = VERTEX_POINT('',#140134); +#140134 = CARTESIAN_POINT('',(123.44165,-117.4031,1.585)); +#140135 = CIRCLE('',#140136,6.000000000043E-02); +#140136 = AXIS2_PLACEMENT_3D('',#140137,#140138,#140139); +#140137 = CARTESIAN_POINT('',(123.44164977441,-117.4631,1.585)); +#140138 = DIRECTION('',(0.,0.,-1.)); +#140139 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140140 = ORIENTED_EDGE('',*,*,#140141,.T.); +#140141 = EDGE_CURVE('',#140133,#140142,#140144,.T.); +#140142 = VERTEX_POINT('',#140143); +#140143 = CARTESIAN_POINT('',(124.94165,-117.4031,1.585)); +#140144 = LINE('',#140145,#140146); +#140145 = CARTESIAN_POINT('',(123.44165,-117.4031,1.585)); +#140146 = VECTOR('',#140147,1.); +#140147 = DIRECTION('',(1.,0.,0.)); +#140148 = ORIENTED_EDGE('',*,*,#140149,.T.); +#140149 = EDGE_CURVE('',#140142,#140150,#140152,.T.); +#140150 = VERTEX_POINT('',#140151); +#140151 = CARTESIAN_POINT('',(124.94165,-117.5231,1.585)); +#140152 = CIRCLE('',#140153,6.000000000042E-02); +#140153 = AXIS2_PLACEMENT_3D('',#140154,#140155,#140156); +#140154 = CARTESIAN_POINT('',(124.94165022558,-117.4631,1.585)); +#140155 = DIRECTION('',(0.,0.,-1.)); +#140156 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140157 = ORIENTED_EDGE('',*,*,#140158,.T.); +#140158 = EDGE_CURVE('',#140150,#140131,#140159,.T.); +#140159 = LINE('',#140160,#140161); +#140160 = CARTESIAN_POINT('',(124.94165,-117.5231,1.585)); +#140161 = VECTOR('',#140162,1.); +#140162 = DIRECTION('',(-1.,0.,0.)); +#140163 = PLANE('',#140164); +#140164 = AXIS2_PLACEMENT_3D('',#140165,#140166,#140167); +#140165 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140166 = DIRECTION('',(0.,0.,1.)); +#140167 = DIRECTION('',(1.,0.,-0.)); +#140168 = SHELL_BASED_SURFACE_MODEL('',(#140169)); +#140169 = OPEN_SHELL('',(#140170)); +#140170 = ADVANCED_FACE('',(#140171),#140257,.T.); +#140171 = FACE_BOUND('',#140172,.F.); +#140172 = EDGE_LOOP('',(#140173,#140184,#140192,#140201,#140209,#140217, + #140225,#140234,#140242,#140251)); +#140173 = ORIENTED_EDGE('',*,*,#140174,.T.); +#140174 = EDGE_CURVE('',#140175,#140177,#140179,.T.); +#140175 = VERTEX_POINT('',#140176); +#140176 = CARTESIAN_POINT('',(98.44665,-115.3631,1.585)); +#140177 = VERTEX_POINT('',#140178); +#140178 = CARTESIAN_POINT('',(98.50665,-115.3031,1.585)); +#140179 = CIRCLE('',#140180,5.999932016258E-02); +#140180 = AXIS2_PLACEMENT_3D('',#140181,#140182,#140183); +#140181 = CARTESIAN_POINT('',(98.506649320159,-115.3630993201,1.585)); +#140182 = DIRECTION('',(0.,0.,-1.)); +#140183 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#140184 = ORIENTED_EDGE('',*,*,#140185,.T.); +#140185 = EDGE_CURVE('',#140177,#140186,#140188,.T.); +#140186 = VERTEX_POINT('',#140187); +#140187 = CARTESIAN_POINT('',(101.19165,-115.3031,1.585)); +#140188 = LINE('',#140189,#140190); +#140189 = CARTESIAN_POINT('',(98.50665,-115.3031,1.585)); +#140190 = VECTOR('',#140191,1.); +#140191 = DIRECTION('',(1.,0.,0.)); +#140192 = ORIENTED_EDGE('',*,*,#140193,.T.); +#140193 = EDGE_CURVE('',#140186,#140194,#140196,.T.); +#140194 = VERTEX_POINT('',#140195); +#140195 = CARTESIAN_POINT('',(101.19165,-115.4231,1.585)); +#140196 = CIRCLE('',#140197,6.000000000042E-02); +#140197 = AXIS2_PLACEMENT_3D('',#140198,#140199,#140200); +#140198 = CARTESIAN_POINT('',(101.19165022558,-115.3631,1.585)); +#140199 = DIRECTION('',(0.,0.,-1.)); +#140200 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#140201 = ORIENTED_EDGE('',*,*,#140202,.T.); +#140202 = EDGE_CURVE('',#140194,#140203,#140205,.T.); +#140203 = VERTEX_POINT('',#140204); +#140204 = CARTESIAN_POINT('',(98.56665,-115.4231,1.585)); +#140205 = LINE('',#140206,#140207); +#140206 = CARTESIAN_POINT('',(101.19165,-115.4231,1.585)); +#140207 = VECTOR('',#140208,1.); +#140208 = DIRECTION('',(-1.,0.,0.)); +#140209 = ORIENTED_EDGE('',*,*,#140210,.T.); +#140210 = EDGE_CURVE('',#140203,#140211,#140213,.T.); +#140211 = VERTEX_POINT('',#140212); +#140212 = CARTESIAN_POINT('',(98.56665,-117.2231,1.585)); +#140213 = LINE('',#140214,#140215); +#140214 = CARTESIAN_POINT('',(98.56665,-115.4231,1.585)); +#140215 = VECTOR('',#140216,1.); +#140216 = DIRECTION('',(0.,-1.,0.)); +#140217 = ORIENTED_EDGE('',*,*,#140218,.T.); +#140218 = EDGE_CURVE('',#140211,#140219,#140221,.T.); +#140219 = VERTEX_POINT('',#140220); +#140220 = CARTESIAN_POINT('',(101.19165,-117.2231,1.585)); +#140221 = LINE('',#140222,#140223); +#140222 = CARTESIAN_POINT('',(98.56665,-117.2231,1.585)); +#140223 = VECTOR('',#140224,1.); +#140224 = DIRECTION('',(1.,0.,0.)); +#140225 = ORIENTED_EDGE('',*,*,#140226,.T.); +#140226 = EDGE_CURVE('',#140219,#140227,#140229,.T.); +#140227 = VERTEX_POINT('',#140228); +#140228 = CARTESIAN_POINT('',(101.19165,-117.3431,1.585)); +#140229 = CIRCLE('',#140230,6.000000000042E-02); +#140230 = AXIS2_PLACEMENT_3D('',#140231,#140232,#140233); +#140231 = CARTESIAN_POINT('',(101.19165022558,-117.2831,1.585)); +#140232 = DIRECTION('',(0.,0.,-1.)); +#140233 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#140234 = ORIENTED_EDGE('',*,*,#140235,.T.); +#140235 = EDGE_CURVE('',#140227,#140236,#140238,.T.); +#140236 = VERTEX_POINT('',#140237); +#140237 = CARTESIAN_POINT('',(98.50665,-117.3431,1.585)); +#140238 = LINE('',#140239,#140240); +#140239 = CARTESIAN_POINT('',(101.19165,-117.3431,1.585)); +#140240 = VECTOR('',#140241,1.); +#140241 = DIRECTION('',(-1.,0.,0.)); +#140242 = ORIENTED_EDGE('',*,*,#140243,.T.); +#140243 = EDGE_CURVE('',#140236,#140244,#140246,.T.); +#140244 = VERTEX_POINT('',#140245); +#140245 = CARTESIAN_POINT('',(98.44665,-117.2831,1.585)); +#140246 = CIRCLE('',#140247,5.999932016262E-02); +#140247 = AXIS2_PLACEMENT_3D('',#140248,#140249,#140250); +#140248 = CARTESIAN_POINT('',(98.506649320159,-117.2831006798,1.585)); +#140249 = DIRECTION('',(0.,0.,-1.)); +#140250 = DIRECTION('',(1.133081541087E-05,-0.999999999936,0.)); +#140251 = ORIENTED_EDGE('',*,*,#140252,.T.); +#140252 = EDGE_CURVE('',#140244,#140175,#140253,.T.); +#140253 = LINE('',#140254,#140255); +#140254 = CARTESIAN_POINT('',(98.44665,-117.2831,1.585)); +#140255 = VECTOR('',#140256,1.); +#140256 = DIRECTION('',(0.,1.,0.)); +#140257 = PLANE('',#140258); +#140258 = AXIS2_PLACEMENT_3D('',#140259,#140260,#140261); +#140259 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140260 = DIRECTION('',(0.,0.,1.)); +#140261 = DIRECTION('',(1.,0.,-0.)); +#140262 = SHELL_BASED_SURFACE_MODEL('',(#140263)); +#140263 = OPEN_SHELL('',(#140264)); +#140264 = ADVANCED_FACE('',(#140265),#140301,.T.); +#140265 = FACE_BOUND('',#140266,.F.); +#140266 = EDGE_LOOP('',(#140267,#140278,#140286,#140295)); +#140267 = ORIENTED_EDGE('',*,*,#140268,.T.); +#140268 = EDGE_CURVE('',#140269,#140271,#140273,.T.); +#140269 = VERTEX_POINT('',#140270); +#140270 = CARTESIAN_POINT('',(179.454392,-116.9056,1.585)); +#140271 = VERTEX_POINT('',#140272); +#140272 = CARTESIAN_POINT('',(179.454392,-116.7856,1.585)); +#140273 = CIRCLE('',#140274,6.000000000042E-02); +#140274 = AXIS2_PLACEMENT_3D('',#140275,#140276,#140277); +#140275 = CARTESIAN_POINT('',(179.45439177441,-116.8456,1.585)); +#140276 = DIRECTION('',(0.,0.,-1.)); +#140277 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#140278 = ORIENTED_EDGE('',*,*,#140279,.T.); +#140279 = EDGE_CURVE('',#140271,#140280,#140282,.T.); +#140280 = VERTEX_POINT('',#140281); +#140281 = CARTESIAN_POINT('',(179.928908,-116.7856,1.585)); +#140282 = LINE('',#140283,#140284); +#140283 = CARTESIAN_POINT('',(179.454392,-116.7856,1.585)); +#140284 = VECTOR('',#140285,1.); +#140285 = DIRECTION('',(1.,0.,0.)); +#140286 = ORIENTED_EDGE('',*,*,#140287,.T.); +#140287 = EDGE_CURVE('',#140280,#140288,#140290,.T.); +#140288 = VERTEX_POINT('',#140289); +#140289 = CARTESIAN_POINT('',(179.928908,-116.9056,1.585)); +#140290 = CIRCLE('',#140291,6.000000000042E-02); +#140291 = AXIS2_PLACEMENT_3D('',#140292,#140293,#140294); +#140292 = CARTESIAN_POINT('',(179.92890822558,-116.8456,1.585)); +#140293 = DIRECTION('',(0.,0.,-1.)); +#140294 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140295 = ORIENTED_EDGE('',*,*,#140296,.T.); +#140296 = EDGE_CURVE('',#140288,#140269,#140297,.T.); +#140297 = LINE('',#140298,#140299); +#140298 = CARTESIAN_POINT('',(179.928908,-116.9056,1.585)); +#140299 = VECTOR('',#140300,1.); +#140300 = DIRECTION('',(-1.,0.,0.)); +#140301 = PLANE('',#140302); +#140302 = AXIS2_PLACEMENT_3D('',#140303,#140304,#140305); +#140303 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140304 = DIRECTION('',(0.,0.,1.)); +#140305 = DIRECTION('',(1.,0.,-0.)); +#140306 = SHELL_BASED_SURFACE_MODEL('',(#140307)); +#140307 = OPEN_SHELL('',(#140308)); +#140308 = ADVANCED_FACE('',(#140309),#140345,.T.); +#140309 = FACE_BOUND('',#140310,.F.); +#140310 = EDGE_LOOP('',(#140311,#140322,#140330,#140339)); +#140311 = ORIENTED_EDGE('',*,*,#140312,.T.); +#140312 = EDGE_CURVE('',#140313,#140315,#140317,.T.); +#140313 = VERTEX_POINT('',#140314); +#140314 = CARTESIAN_POINT('',(92.05107,-116.8931,1.585)); +#140315 = VERTEX_POINT('',#140316); +#140316 = CARTESIAN_POINT('',(92.05107,-116.7731,1.585)); +#140317 = CIRCLE('',#140318,6.000000000042E-02); +#140318 = AXIS2_PLACEMENT_3D('',#140319,#140320,#140321); +#140319 = CARTESIAN_POINT('',(92.051069774412,-116.8331,1.585)); +#140320 = DIRECTION('',(0.,0.,-1.)); +#140321 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140322 = ORIENTED_EDGE('',*,*,#140323,.T.); +#140323 = EDGE_CURVE('',#140315,#140324,#140326,.T.); +#140324 = VERTEX_POINT('',#140325); +#140325 = CARTESIAN_POINT('',(92.33223,-116.7731,1.585)); +#140326 = LINE('',#140327,#140328); +#140327 = CARTESIAN_POINT('',(92.05107,-116.7731,1.585)); +#140328 = VECTOR('',#140329,1.); +#140329 = DIRECTION('',(1.,0.,0.)); +#140330 = ORIENTED_EDGE('',*,*,#140331,.T.); +#140331 = EDGE_CURVE('',#140324,#140332,#140334,.T.); +#140332 = VERTEX_POINT('',#140333); +#140333 = CARTESIAN_POINT('',(92.33223,-116.8931,1.585)); +#140334 = CIRCLE('',#140335,6.000000000042E-02); +#140335 = AXIS2_PLACEMENT_3D('',#140336,#140337,#140338); +#140336 = CARTESIAN_POINT('',(92.332230225588,-116.8331,1.585)); +#140337 = DIRECTION('',(0.,0.,-1.)); +#140338 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140339 = ORIENTED_EDGE('',*,*,#140340,.T.); +#140340 = EDGE_CURVE('',#140332,#140313,#140341,.T.); +#140341 = LINE('',#140342,#140343); +#140342 = CARTESIAN_POINT('',(92.33223,-116.8931,1.585)); +#140343 = VECTOR('',#140344,1.); +#140344 = DIRECTION('',(-1.,0.,0.)); +#140345 = PLANE('',#140346); +#140346 = AXIS2_PLACEMENT_3D('',#140347,#140348,#140349); +#140347 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140348 = DIRECTION('',(0.,0.,1.)); +#140349 = DIRECTION('',(1.,0.,-0.)); +#140350 = SHELL_BASED_SURFACE_MODEL('',(#140351)); +#140351 = OPEN_SHELL('',(#140352)); +#140352 = ADVANCED_FACE('',(#140353),#140389,.T.); +#140353 = FACE_BOUND('',#140354,.F.); +#140354 = EDGE_LOOP('',(#140355,#140366,#140374,#140383)); +#140355 = ORIENTED_EDGE('',*,*,#140356,.T.); +#140356 = EDGE_CURVE('',#140357,#140359,#140361,.T.); +#140357 = VERTEX_POINT('',#140358); +#140358 = CARTESIAN_POINT('',(96.05107,-116.8931,1.585)); +#140359 = VERTEX_POINT('',#140360); +#140360 = CARTESIAN_POINT('',(96.05107,-116.7731,1.585)); +#140361 = CIRCLE('',#140362,6.000000000042E-02); +#140362 = AXIS2_PLACEMENT_3D('',#140363,#140364,#140365); +#140363 = CARTESIAN_POINT('',(96.051069774412,-116.8331,1.585)); +#140364 = DIRECTION('',(0.,0.,-1.)); +#140365 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140366 = ORIENTED_EDGE('',*,*,#140367,.T.); +#140367 = EDGE_CURVE('',#140359,#140368,#140370,.T.); +#140368 = VERTEX_POINT('',#140369); +#140369 = CARTESIAN_POINT('',(96.33223,-116.7731,1.585)); +#140370 = LINE('',#140371,#140372); +#140371 = CARTESIAN_POINT('',(96.05107,-116.7731,1.585)); +#140372 = VECTOR('',#140373,1.); +#140373 = DIRECTION('',(1.,0.,0.)); +#140374 = ORIENTED_EDGE('',*,*,#140375,.T.); +#140375 = EDGE_CURVE('',#140368,#140376,#140378,.T.); +#140376 = VERTEX_POINT('',#140377); +#140377 = CARTESIAN_POINT('',(96.33223,-116.8931,1.585)); +#140378 = CIRCLE('',#140379,6.000000000042E-02); +#140379 = AXIS2_PLACEMENT_3D('',#140380,#140381,#140382); +#140380 = CARTESIAN_POINT('',(96.332230225588,-116.8331,1.585)); +#140381 = DIRECTION('',(0.,0.,-1.)); +#140382 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140383 = ORIENTED_EDGE('',*,*,#140384,.T.); +#140384 = EDGE_CURVE('',#140376,#140357,#140385,.T.); +#140385 = LINE('',#140386,#140387); +#140386 = CARTESIAN_POINT('',(96.33223,-116.8931,1.585)); +#140387 = VECTOR('',#140388,1.); +#140388 = DIRECTION('',(-1.,0.,0.)); +#140389 = PLANE('',#140390); +#140390 = AXIS2_PLACEMENT_3D('',#140391,#140392,#140393); +#140391 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140392 = DIRECTION('',(0.,0.,1.)); +#140393 = DIRECTION('',(1.,0.,-0.)); +#140394 = SHELL_BASED_SURFACE_MODEL('',(#140395)); +#140395 = OPEN_SHELL('',(#140396)); +#140396 = ADVANCED_FACE('',(#140397),#140433,.T.); +#140397 = FACE_BOUND('',#140398,.F.); +#140398 = EDGE_LOOP('',(#140399,#140410,#140418,#140427)); +#140399 = ORIENTED_EDGE('',*,*,#140400,.T.); +#140400 = EDGE_CURVE('',#140401,#140403,#140405,.T.); +#140401 = VERTEX_POINT('',#140402); +#140402 = CARTESIAN_POINT('',(129.886082,-116.7981,1.585)); +#140403 = VERTEX_POINT('',#140404); +#140404 = CARTESIAN_POINT('',(129.886082,-116.6781,1.585)); +#140405 = CIRCLE('',#140406,6.000000000043E-02); +#140406 = AXIS2_PLACEMENT_3D('',#140407,#140408,#140409); +#140407 = CARTESIAN_POINT('',(129.88608177441,-116.7381,1.585)); +#140408 = DIRECTION('',(0.,0.,-1.)); +#140409 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#140410 = ORIENTED_EDGE('',*,*,#140411,.T.); +#140411 = EDGE_CURVE('',#140403,#140412,#140414,.T.); +#140412 = VERTEX_POINT('',#140413); +#140413 = CARTESIAN_POINT('',(131.02165,-116.6781,1.585)); +#140414 = LINE('',#140415,#140416); +#140415 = CARTESIAN_POINT('',(129.886082,-116.6781,1.585)); +#140416 = VECTOR('',#140417,1.); +#140417 = DIRECTION('',(1.,0.,0.)); +#140418 = ORIENTED_EDGE('',*,*,#140419,.T.); +#140419 = EDGE_CURVE('',#140412,#140420,#140422,.T.); +#140420 = VERTEX_POINT('',#140421); +#140421 = CARTESIAN_POINT('',(131.02165,-116.7981,1.585)); +#140422 = CIRCLE('',#140423,6.000000000042E-02); +#140423 = AXIS2_PLACEMENT_3D('',#140424,#140425,#140426); +#140424 = CARTESIAN_POINT('',(131.02165022558,-116.7381,1.585)); +#140425 = DIRECTION('',(0.,0.,-1.)); +#140426 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#140427 = ORIENTED_EDGE('',*,*,#140428,.T.); +#140428 = EDGE_CURVE('',#140420,#140401,#140429,.T.); +#140429 = LINE('',#140430,#140431); +#140430 = CARTESIAN_POINT('',(131.02165,-116.7981,1.585)); +#140431 = VECTOR('',#140432,1.); +#140432 = DIRECTION('',(-1.,0.,0.)); +#140433 = PLANE('',#140434); +#140434 = AXIS2_PLACEMENT_3D('',#140435,#140436,#140437); +#140435 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140436 = DIRECTION('',(0.,0.,1.)); +#140437 = DIRECTION('',(1.,0.,-0.)); +#140438 = SHELL_BASED_SURFACE_MODEL('',(#140439)); +#140439 = OPEN_SHELL('',(#140440)); +#140440 = ADVANCED_FACE('',(#140441),#140501,.T.); +#140441 = FACE_BOUND('',#140442,.F.); +#140442 = EDGE_LOOP('',(#140443,#140454,#140462,#140471,#140479,#140487, + #140495)); +#140443 = ORIENTED_EDGE('',*,*,#140444,.T.); +#140444 = EDGE_CURVE('',#140445,#140447,#140449,.T.); +#140445 = VERTEX_POINT('',#140446); +#140446 = CARTESIAN_POINT('',(129.403347,-116.578692,1.585)); +#140447 = VERTEX_POINT('',#140448); +#140448 = CARTESIAN_POINT('',(129.45165,-116.4831,1.585)); +#140449 = CIRCLE('',#140450,5.999970641124E-02); +#140450 = AXIS2_PLACEMENT_3D('',#140451,#140452,#140453); +#140451 = CARTESIAN_POINT('',(129.45164972669,-116.5430997064,1.585)); +#140452 = DIRECTION('',(0.,0.,-1.)); +#140453 = DIRECTION('',(-0.805049384194,-0.593207795809,-0.)); +#140454 = ORIENTED_EDGE('',*,*,#140455,.T.); +#140455 = EDGE_CURVE('',#140447,#140456,#140458,.T.); +#140456 = VERTEX_POINT('',#140457); +#140457 = CARTESIAN_POINT('',(129.73165,-116.4831,1.585)); +#140458 = LINE('',#140459,#140460); +#140459 = CARTESIAN_POINT('',(129.45165,-116.4831,1.585)); +#140460 = VECTOR('',#140461,1.); +#140461 = DIRECTION('',(1.,0.,0.)); +#140462 = ORIENTED_EDGE('',*,*,#140463,.T.); +#140463 = EDGE_CURVE('',#140456,#140464,#140466,.T.); +#140464 = VERTEX_POINT('',#140465); +#140465 = CARTESIAN_POINT('',(129.779953,-116.578692,1.585)); +#140466 = CIRCLE('',#140467,6.000032339632E-02); +#140467 = AXIS2_PLACEMENT_3D('',#140468,#140469,#140470); +#140468 = CARTESIAN_POINT('',(129.73164905229,-116.5431003233,1.585)); +#140469 = DIRECTION('',(0.,0.,-1.)); +#140470 = DIRECTION('',(1.579496061155E-05,0.999999999875,0.)); +#140471 = ORIENTED_EDGE('',*,*,#140472,.T.); +#140472 = EDGE_CURVE('',#140464,#140473,#140475,.T.); +#140473 = VERTEX_POINT('',#140474); +#140474 = CARTESIAN_POINT('',(129.639953,-116.768692,1.585)); +#140475 = LINE('',#140476,#140477); +#140476 = CARTESIAN_POINT('',(129.779953,-116.578692,1.585)); +#140477 = VECTOR('',#140478,1.); +#140478 = DIRECTION('',(-0.59319903805,-0.805055837353,0.)); +#140479 = ORIENTED_EDGE('',*,*,#140480,.T.); +#140480 = EDGE_CURVE('',#140473,#140481,#140483,.T.); +#140481 = VERTEX_POINT('',#140482); +#140482 = CARTESIAN_POINT('',(129.600638,-116.792423,1.585)); +#140483 = LINE('',#140484,#140485); +#140484 = CARTESIAN_POINT('',(129.639953,-116.768692,1.585)); +#140485 = VECTOR('',#140486,1.); +#140486 = DIRECTION('',(-0.856125705372,-0.516767623406,0.)); +#140487 = ORIENTED_EDGE('',*,*,#140488,.T.); +#140488 = EDGE_CURVE('',#140481,#140489,#140491,.T.); +#140489 = VERTEX_POINT('',#140490); +#140490 = CARTESIAN_POINT('',(129.556058,-116.781403,1.585)); +#140491 = LINE('',#140492,#140493); +#140492 = CARTESIAN_POINT('',(129.600638,-116.792423,1.585)); +#140493 = VECTOR('',#140494,1.); +#140494 = DIRECTION('',(-0.970779591709,0.239972882473,0.)); +#140495 = ORIENTED_EDGE('',*,*,#140496,.T.); +#140496 = EDGE_CURVE('',#140489,#140445,#140497,.T.); +#140497 = LINE('',#140498,#140499); +#140498 = CARTESIAN_POINT('',(129.556058,-116.781403,1.585)); +#140499 = VECTOR('',#140500,1.); +#140500 = DIRECTION('',(-0.601707720116,0.798716357384,0.)); +#140501 = PLANE('',#140502); +#140502 = AXIS2_PLACEMENT_3D('',#140503,#140504,#140505); +#140503 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140504 = DIRECTION('',(0.,0.,1.)); +#140505 = DIRECTION('',(1.,0.,-0.)); +#140506 = SHELL_BASED_SURFACE_MODEL('',(#140507)); +#140507 = OPEN_SHELL('',(#140508)); +#140508 = ADVANCED_FACE('',(#140509),#140570,.T.); +#140509 = FACE_BOUND('',#140510,.F.); +#140510 = EDGE_LOOP('',(#140511,#140522,#140530,#140539,#140547,#140556, + #140564)); +#140511 = ORIENTED_EDGE('',*,*,#140512,.T.); +#140512 = EDGE_CURVE('',#140513,#140515,#140517,.T.); +#140513 = VERTEX_POINT('',#140514); +#140514 = CARTESIAN_POINT('',(197.797494,-115.501478,1.585)); +#140515 = VERTEX_POINT('',#140516); +#140516 = CARTESIAN_POINT('',(197.812126,-115.352919,1.585)); +#140517 = CIRCLE('',#140518,7.500006711465E-02); +#140518 = AXIS2_PLACEMENT_3D('',#140519,#140520,#140521); +#140519 = CARTESIAN_POINT('',(197.81212593288,-115.4279190671,1.585)); +#140520 = DIRECTION('',(0.,0.,-1.)); +#140521 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#140522 = ORIENTED_EDGE('',*,*,#140523,.T.); +#140523 = EDGE_CURVE('',#140515,#140524,#140526,.T.); +#140524 = VERTEX_POINT('',#140525); +#140525 = CARTESIAN_POINT('',(198.493424,-115.35436,1.585)); +#140526 = LINE('',#140527,#140528); +#140527 = CARTESIAN_POINT('',(197.812126,-115.352919,1.585)); +#140528 = VECTOR('',#140529,1.); +#140529 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#140530 = ORIENTED_EDGE('',*,*,#140531,.T.); +#140531 = EDGE_CURVE('',#140524,#140532,#140534,.T.); +#140532 = VERTEX_POINT('',#140533); +#140533 = CARTESIAN_POINT('',(198.547728,-115.457463,1.585)); +#140534 = CIRCLE('',#140535,7.500015546837E-02); +#140535 = AXIS2_PLACEMENT_3D('',#140536,#140537,#140538); +#140536 = CARTESIAN_POINT('',(198.47879197422,-115.4279190044,1.585)); +#140537 = DIRECTION('',(0.,0.,-1.)); +#140538 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#140539 = ORIENTED_EDGE('',*,*,#140540,.T.); +#140540 = EDGE_CURVE('',#140532,#140541,#140543,.T.); +#140541 = VERTEX_POINT('',#140542); +#140542 = CARTESIAN_POINT('',(198.112069,-116.470344,1.585)); +#140543 = LINE('',#140544,#140545); +#140544 = CARTESIAN_POINT('',(198.547728,-115.457463,1.585)); +#140545 = VECTOR('',#140546,1.); +#140546 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#140547 = ORIENTED_EDGE('',*,*,#140548,.T.); +#140548 = EDGE_CURVE('',#140541,#140549,#140551,.T.); +#140549 = VERTEX_POINT('',#140550); +#140550 = CARTESIAN_POINT('',(197.981285,-116.398375,1.585)); +#140551 = CIRCLE('',#140552,7.500030178419E-02); +#140552 = AXIS2_PLACEMENT_3D('',#140553,#140554,#140555); +#140553 = CARTESIAN_POINT('',(198.05022134698,-116.4279186174,1.585)); +#140554 = DIRECTION('',(-0.,0.,-1.)); +#140555 = DIRECTION('',(0.82463205542,-0.565669491111,-0.)); +#140556 = ORIENTED_EDGE('',*,*,#140557,.T.); +#140557 = EDGE_CURVE('',#140549,#140558,#140560,.T.); +#140558 = VERTEX_POINT('',#140559); +#140559 = CARTESIAN_POINT('',(198.365051,-115.502919,1.585)); +#140560 = LINE('',#140561,#140562); +#140561 = CARTESIAN_POINT('',(197.981285,-116.398375,1.585)); +#140562 = VECTOR('',#140563,1.); +#140563 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#140564 = ORIENTED_EDGE('',*,*,#140565,.T.); +#140565 = EDGE_CURVE('',#140558,#140513,#140566,.T.); +#140566 = LINE('',#140567,#140568); +#140567 = CARTESIAN_POINT('',(198.365051,-115.502919,1.585)); +#140568 = VECTOR('',#140569,1.); +#140569 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#140570 = PLANE('',#140571); +#140571 = AXIS2_PLACEMENT_3D('',#140572,#140573,#140574); +#140572 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140573 = DIRECTION('',(0.,0.,1.)); +#140574 = DIRECTION('',(1.,0.,-0.)); +#140575 = SHELL_BASED_SURFACE_MODEL('',(#140576)); +#140576 = OPEN_SHELL('',(#140577)); +#140577 = ADVANCED_FACE('',(#140578),#140698,.T.); +#140578 = FACE_BOUND('',#140579,.F.); +#140579 = EDGE_LOOP('',(#140580,#140591,#140599,#140608,#140616,#140625, + #140633,#140642,#140650,#140659,#140667,#140676,#140684,#140692)); +#140580 = ORIENTED_EDGE('',*,*,#140581,.T.); +#140581 = EDGE_CURVE('',#140582,#140584,#140586,.T.); +#140582 = VERTEX_POINT('',#140583); +#140583 = CARTESIAN_POINT('',(196.818077,-115.365559,1.585)); +#140584 = VERTEX_POINT('',#140585); +#140585 = CARTESIAN_POINT('',(196.934745,-115.427919,1.585)); +#140586 = CIRCLE('',#140587,7.500000000003E-02); +#140587 = AXIS2_PLACEMENT_3D('',#140588,#140589,#140590); +#140588 = CARTESIAN_POINT('',(196.859745,-115.4279190655,1.585)); +#140589 = DIRECTION('',(0.,0.,-1.)); +#140590 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#140591 = ORIENTED_EDGE('',*,*,#140592,.T.); +#140592 = EDGE_CURVE('',#140584,#140593,#140595,.T.); +#140593 = VERTEX_POINT('',#140594); +#140594 = CARTESIAN_POINT('',(196.934745,-116.219737,1.585)); +#140595 = LINE('',#140596,#140597); +#140596 = CARTESIAN_POINT('',(196.934745,-115.427919,1.585)); +#140597 = VECTOR('',#140598,1.); +#140598 = DIRECTION('',(0.,-1.,0.)); +#140599 = ORIENTED_EDGE('',*,*,#140600,.T.); +#140600 = EDGE_CURVE('',#140593,#140601,#140603,.T.); +#140601 = VERTEX_POINT('',#140602); +#140602 = CARTESIAN_POINT('',(197.067926,-116.352919,1.585)); +#140603 = CIRCLE('',#140604,0.186867373533); +#140604 = AXIS2_PLACEMENT_3D('',#140605,#140606,#140607); +#140605 = CARTESIAN_POINT('',(197.11546471388,-116.172199643,1.585)); +#140606 = DIRECTION('',(0.,0.,1.)); +#140607 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#140608 = ORIENTED_EDGE('',*,*,#140609,.T.); +#140609 = EDGE_CURVE('',#140601,#140610,#140612,.T.); +#140610 = VERTEX_POINT('',#140611); +#140611 = CARTESIAN_POINT('',(197.222992,-116.352919,1.585)); +#140612 = LINE('',#140613,#140614); +#140613 = CARTESIAN_POINT('',(197.067926,-116.352919,1.585)); +#140614 = VECTOR('',#140615,1.); +#140615 = DIRECTION('',(1.,0.,0.)); +#140616 = ORIENTED_EDGE('',*,*,#140617,.T.); +#140617 = EDGE_CURVE('',#140610,#140618,#140620,.T.); +#140618 = VERTEX_POINT('',#140619); +#140619 = CARTESIAN_POINT('',(197.356173,-116.219737,1.585)); +#140620 = CIRCLE('',#140621,0.186867760544); +#140621 = AXIS2_PLACEMENT_3D('',#140622,#140623,#140624); +#140622 = CARTESIAN_POINT('',(197.17545296928,-116.1721993262,1.585)); +#140623 = DIRECTION('',(0.,0.,1.)); +#140624 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#140625 = ORIENTED_EDGE('',*,*,#140626,.T.); +#140626 = EDGE_CURVE('',#140618,#140627,#140629,.T.); +#140627 = VERTEX_POINT('',#140628); +#140628 = CARTESIAN_POINT('',(197.357614,-115.413287,1.585)); +#140629 = LINE('',#140630,#140631); +#140630 = CARTESIAN_POINT('',(197.356173,-116.219737,1.585)); +#140631 = VECTOR('',#140632,1.); +#140632 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#140633 = ORIENTED_EDGE('',*,*,#140634,.T.); +#140634 = EDGE_CURVE('',#140627,#140635,#140637,.T.); +#140635 = VERTEX_POINT('',#140636); +#140636 = CARTESIAN_POINT('',(197.506173,-115.427919,1.585)); +#140637 = CIRCLE('',#140638,7.500006711463E-02); +#140638 = AXIS2_PLACEMENT_3D('',#140639,#140640,#140641); +#140639 = CARTESIAN_POINT('',(197.43117293288,-115.4279189328,1.585)); +#140640 = DIRECTION('',(0.,0.,-1.)); +#140641 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#140642 = ORIENTED_EDGE('',*,*,#140643,.T.); +#140643 = EDGE_CURVE('',#140635,#140644,#140646,.T.); +#140644 = VERTEX_POINT('',#140645); +#140645 = CARTESIAN_POINT('',(197.50351,-116.257252,1.585)); +#140646 = LINE('',#140647,#140648); +#140647 = CARTESIAN_POINT('',(197.506173,-115.427919,1.585)); +#140648 = VECTOR('',#140649,1.); +#140649 = DIRECTION('',(-3.210997598685E-03,-0.999994844734,0.)); +#140650 = ORIENTED_EDGE('',*,*,#140651,.T.); +#140651 = EDGE_CURVE('',#140644,#140652,#140654,.T.); +#140652 = VERTEX_POINT('',#140653); +#140653 = CARTESIAN_POINT('',(197.255329,-116.501478,1.585)); +#140654 = CIRCLE('',#140655,0.348635327447); +#140655 = AXIS2_PLACEMENT_3D('',#140656,#140657,#140658); +#140656 = CARTESIAN_POINT('',(197.16755748129,-116.1640720841,1.585)); +#140657 = DIRECTION('',(0.,0.,-1.)); +#140658 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#140659 = ORIENTED_EDGE('',*,*,#140660,.T.); +#140660 = EDGE_CURVE('',#140652,#140661,#140663,.T.); +#140661 = VERTEX_POINT('',#140662); +#140662 = CARTESIAN_POINT('',(197.030411,-116.500256,1.585)); +#140663 = LINE('',#140664,#140665); +#140664 = CARTESIAN_POINT('',(197.255329,-116.501478,1.585)); +#140665 = VECTOR('',#140666,1.); +#140666 = DIRECTION('',(-0.999985241087,5.433010984541E-03,0.)); +#140667 = ORIENTED_EDGE('',*,*,#140668,.T.); +#140668 = EDGE_CURVE('',#140661,#140669,#140671,.T.); +#140669 = VERTEX_POINT('',#140670); +#140670 = CARTESIAN_POINT('',(196.786186,-116.252074,1.585)); +#140671 = CIRCLE('',#140672,0.348628446662); +#140672 = AXIS2_PLACEMENT_3D('',#140673,#140674,#140675); +#140673 = CARTESIAN_POINT('',(197.12358661322,-116.1643094284,1.585)); +#140674 = DIRECTION('',(0.,0.,-1.)); +#140675 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#140676 = ORIENTED_EDGE('',*,*,#140677,.T.); +#140677 = EDGE_CURVE('',#140669,#140678,#140680,.T.); +#140678 = VERTEX_POINT('',#140679); +#140679 = CARTESIAN_POINT('',(196.786186,-115.413287,1.585)); +#140680 = LINE('',#140681,#140682); +#140681 = CARTESIAN_POINT('',(196.786186,-116.252074,1.585)); +#140682 = VECTOR('',#140683,1.); +#140683 = DIRECTION('',(0.,1.,0.)); +#140684 = ORIENTED_EDGE('',*,*,#140685,.T.); +#140685 = EDGE_CURVE('',#140678,#140686,#140688,.T.); +#140686 = VERTEX_POINT('',#140687); +#140687 = CARTESIAN_POINT('',(196.797385,-115.386251,1.585)); +#140688 = LINE('',#140689,#140690); +#140689 = CARTESIAN_POINT('',(196.786186,-115.413287,1.585)); +#140690 = VECTOR('',#140691,1.); +#140691 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#140692 = ORIENTED_EDGE('',*,*,#140693,.T.); +#140693 = EDGE_CURVE('',#140686,#140582,#140694,.T.); +#140694 = LINE('',#140695,#140696); +#140695 = CARTESIAN_POINT('',(196.797385,-115.386251,1.585)); +#140696 = VECTOR('',#140697,1.); +#140697 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140698 = PLANE('',#140699); +#140699 = AXIS2_PLACEMENT_3D('',#140700,#140701,#140702); +#140700 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140701 = DIRECTION('',(0.,0.,1.)); +#140702 = DIRECTION('',(1.,0.,-0.)); +#140703 = SHELL_BASED_SURFACE_MODEL('',(#140704)); +#140704 = OPEN_SHELL('',(#140705)); +#140705 = ADVANCED_FACE('',(#140706),#140765,.T.); +#140706 = FACE_BOUND('',#140707,.F.); +#140707 = EDGE_LOOP('',(#140708,#140718,#140726,#140734,#140743,#140751, + #140759)); +#140708 = ORIENTED_EDGE('',*,*,#140709,.T.); +#140709 = EDGE_CURVE('',#140710,#140712,#140714,.T.); +#140710 = VERTEX_POINT('',#140711); +#140711 = CARTESIAN_POINT('',(169.766514,-114.234318,1.585)); +#140712 = VERTEX_POINT('',#140713); +#140713 = CARTESIAN_POINT('',(169.820586,-114.21192,1.585)); +#140714 = LINE('',#140715,#140716); +#140715 = CARTESIAN_POINT('',(169.766514,-114.234318,1.585)); +#140716 = VECTOR('',#140717,1.); +#140717 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#140718 = ORIENTED_EDGE('',*,*,#140719,.T.); +#140719 = EDGE_CURVE('',#140712,#140720,#140722,.T.); +#140720 = VERTEX_POINT('',#140721); +#140721 = CARTESIAN_POINT('',(169.842954,-114.189551,1.585)); +#140722 = LINE('',#140723,#140724); +#140723 = CARTESIAN_POINT('',(169.820586,-114.21192,1.585)); +#140724 = VECTOR('',#140725,1.); +#140725 = DIRECTION('',(0.707090975149,0.707122586871,0.)); +#140726 = ORIENTED_EDGE('',*,*,#140727,.T.); +#140727 = EDGE_CURVE('',#140720,#140728,#140730,.T.); +#140728 = VERTEX_POINT('',#140729); +#140729 = CARTESIAN_POINT('',(171.884076,-116.230673,1.585)); +#140730 = LINE('',#140731,#140732); +#140731 = CARTESIAN_POINT('',(169.842954,-114.189551,1.585)); +#140732 = VECTOR('',#140733,1.); +#140733 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140734 = ORIENTED_EDGE('',*,*,#140735,.T.); +#140735 = EDGE_CURVE('',#140728,#140736,#140738,.T.); +#140736 = VERTEX_POINT('',#140737); +#140737 = CARTESIAN_POINT('',(171.799223,-116.315526,1.585)); +#140738 = CIRCLE('',#140739,6.000013170922E-02); +#140739 = AXIS2_PLACEMENT_3D('',#140740,#140741,#140742); +#140740 = CARTESIAN_POINT('',(171.8416500587,-116.2731000587,1.585)); +#140741 = DIRECTION('',(0.,0.,-1.)); +#140742 = DIRECTION('',(0.707097469327,0.707116092923,0.)); +#140743 = ORIENTED_EDGE('',*,*,#140744,.T.); +#140744 = EDGE_CURVE('',#140736,#140745,#140747,.T.); +#140745 = VERTEX_POINT('',#140746); +#140746 = CARTESIAN_POINT('',(169.719111,-114.235413,1.585)); +#140747 = LINE('',#140748,#140749); +#140748 = CARTESIAN_POINT('',(171.799223,-116.315526,1.585)); +#140749 = VECTOR('',#140750,1.); +#140750 = DIRECTION('',(-0.707106611218,0.707106951155,0.)); +#140751 = ORIENTED_EDGE('',*,*,#140752,.T.); +#140752 = EDGE_CURVE('',#140745,#140753,#140755,.T.); +#140753 = VERTEX_POINT('',#140754); +#140754 = CARTESIAN_POINT('',(169.73725,-114.2372,1.585)); +#140755 = LINE('',#140756,#140757); +#140756 = CARTESIAN_POINT('',(169.719111,-114.235413,1.585)); +#140757 = VECTOR('',#140758,1.); +#140758 = DIRECTION('',(0.995182240819,-9.804237633566E-02,0.)); +#140759 = ORIENTED_EDGE('',*,*,#140760,.T.); +#140760 = EDGE_CURVE('',#140753,#140710,#140761,.T.); +#140761 = LINE('',#140762,#140763); +#140762 = CARTESIAN_POINT('',(169.73725,-114.2372,1.585)); +#140763 = VECTOR('',#140764,1.); +#140764 = DIRECTION('',(0.995185563998,9.800863844454E-02,0.)); +#140765 = PLANE('',#140766); +#140766 = AXIS2_PLACEMENT_3D('',#140767,#140768,#140769); +#140767 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140768 = DIRECTION('',(0.,0.,1.)); +#140769 = DIRECTION('',(1.,0.,-0.)); +#140770 = SHELL_BASED_SURFACE_MODEL('',(#140771)); +#140771 = OPEN_SHELL('',(#140772)); +#140772 = ADVANCED_FACE('',(#140773),#140891,.T.); +#140773 = FACE_BOUND('',#140774,.F.); +#140774 = EDGE_LOOP('',(#140775,#140785,#140793,#140802,#140810,#140818, + #140827,#140835,#140844,#140852,#140860,#140868,#140876,#140885)); +#140775 = ORIENTED_EDGE('',*,*,#140776,.T.); +#140776 = EDGE_CURVE('',#140777,#140779,#140781,.T.); +#140777 = VERTEX_POINT('',#140778); +#140778 = CARTESIAN_POINT('',(84.81702,-114.846861,1.585)); +#140779 = VERTEX_POINT('',#140780); +#140780 = CARTESIAN_POINT('',(85.036922,-115.066763,1.585)); +#140781 = LINE('',#140782,#140783); +#140782 = CARTESIAN_POINT('',(84.81702,-114.846861,1.585)); +#140783 = VECTOR('',#140784,1.); +#140784 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140785 = ORIENTED_EDGE('',*,*,#140786,.T.); +#140786 = EDGE_CURVE('',#140779,#140787,#140789,.T.); +#140787 = VERTEX_POINT('',#140788); +#140788 = CARTESIAN_POINT('',(85.418746,-115.324776,1.585)); +#140789 = LINE('',#140790,#140791); +#140790 = CARTESIAN_POINT('',(85.036922,-115.066763,1.585)); +#140791 = VECTOR('',#140792,1.); +#140792 = DIRECTION('',(0.8285649987,-0.559892885229,0.)); +#140793 = ORIENTED_EDGE('',*,*,#140794,.T.); +#140794 = EDGE_CURVE('',#140787,#140795,#140797,.T.); +#140795 = VERTEX_POINT('',#140796); +#140796 = CARTESIAN_POINT('',(85.31279,-115.580953,1.585)); +#140797 = CIRCLE('',#140798,0.150000684187); +#140798 = AXIS2_PLACEMENT_3D('',#140799,#140800,#140801); +#140799 = CARTESIAN_POINT('',(85.312789427684,-115.4309523158,1.585)); +#140800 = DIRECTION('',(0.,0.,-1.)); +#140801 = DIRECTION('',(0.706373926824,0.707838876796,0.)); +#140802 = ORIENTED_EDGE('',*,*,#140803,.T.); +#140803 = EDGE_CURVE('',#140795,#140804,#140806,.T.); +#140804 = VERTEX_POINT('',#140805); +#140805 = CARTESIAN_POINT('',(82.86279,-115.580953,1.585)); +#140806 = LINE('',#140807,#140808); +#140807 = CARTESIAN_POINT('',(85.31279,-115.580953,1.585)); +#140808 = VECTOR('',#140809,1.); +#140809 = DIRECTION('',(-1.,0.,0.)); +#140810 = ORIENTED_EDGE('',*,*,#140811,.T.); +#140811 = EDGE_CURVE('',#140804,#140812,#140814,.T.); +#140812 = VERTEX_POINT('',#140813); +#140813 = CARTESIAN_POINT('',(82.859908,-116.203074,1.585)); +#140814 = LINE('',#140815,#140816); +#140815 = CARTESIAN_POINT('',(82.86279,-115.580953,1.585)); +#140816 = VECTOR('',#140817,1.); +#140817 = DIRECTION('',(-4.632489621844E-03,-0.999989269962,0.)); +#140818 = ORIENTED_EDGE('',*,*,#140819,.T.); +#140819 = EDGE_CURVE('',#140812,#140820,#140822,.T.); +#140820 = VERTEX_POINT('',#140821); +#140821 = CARTESIAN_POINT('',(82.565672,-116.203074,1.585)); +#140822 = CIRCLE('',#140823,0.150000292066); +#140823 = AXIS2_PLACEMENT_3D('',#140824,#140825,#140826); +#140824 = CARTESIAN_POINT('',(82.71279,-116.17381,1.585)); +#140825 = DIRECTION('',(-0.,0.,-1.)); +#140826 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#140827 = ORIENTED_EDGE('',*,*,#140828,.T.); +#140828 = EDGE_CURVE('',#140820,#140829,#140831,.T.); +#140829 = VERTEX_POINT('',#140830); +#140830 = CARTESIAN_POINT('',(82.565672,-114.658832,1.585)); +#140831 = LINE('',#140832,#140833); +#140832 = CARTESIAN_POINT('',(82.565672,-116.203074,1.585)); +#140833 = VECTOR('',#140834,1.); +#140834 = DIRECTION('',(0.,1.,0.)); +#140835 = ORIENTED_EDGE('',*,*,#140836,.T.); +#140836 = EDGE_CURVE('',#140829,#140837,#140839,.T.); +#140837 = VERTEX_POINT('',#140838); +#140838 = CARTESIAN_POINT('',(82.859908,-114.658832,1.585)); +#140839 = CIRCLE('',#140840,0.150000292066); +#140840 = AXIS2_PLACEMENT_3D('',#140841,#140842,#140843); +#140841 = CARTESIAN_POINT('',(82.71279,-114.688096,1.585)); +#140842 = DIRECTION('',(0.,0.,-1.)); +#140843 = DIRECTION('',(-0.980784756972,0.195092953466,0.)); +#140844 = ORIENTED_EDGE('',*,*,#140845,.T.); +#140845 = EDGE_CURVE('',#140837,#140846,#140848,.T.); +#140846 = VERTEX_POINT('',#140847); +#140847 = CARTESIAN_POINT('',(82.86279,-115.280953,1.585)); +#140848 = LINE('',#140849,#140850); +#140849 = CARTESIAN_POINT('',(82.859908,-114.658832,1.585)); +#140850 = VECTOR('',#140851,1.); +#140851 = DIRECTION('',(4.632489621844E-03,-0.999989269962,0.)); +#140852 = ORIENTED_EDGE('',*,*,#140853,.T.); +#140853 = EDGE_CURVE('',#140846,#140854,#140856,.T.); +#140854 = VERTEX_POINT('',#140855); +#140855 = CARTESIAN_POINT('',(84.826848,-115.280953,1.585)); +#140856 = LINE('',#140857,#140858); +#140857 = CARTESIAN_POINT('',(82.86279,-115.280953,1.585)); +#140858 = VECTOR('',#140859,1.); +#140859 = DIRECTION('',(1.,0.,0.)); +#140860 = ORIENTED_EDGE('',*,*,#140861,.T.); +#140861 = EDGE_CURVE('',#140854,#140862,#140864,.T.); +#140862 = VERTEX_POINT('',#140863); +#140863 = CARTESIAN_POINT('',(84.569021,-115.01905,1.585)); +#140864 = LINE('',#140865,#140866); +#140865 = CARTESIAN_POINT('',(84.826848,-115.280953,1.585)); +#140866 = VECTOR('',#140867,1.); +#140867 = DIRECTION('',(-0.701539698595,0.712630374946,0.)); +#140868 = ORIENTED_EDGE('',*,*,#140869,.T.); +#140869 = EDGE_CURVE('',#140862,#140870,#140872,.T.); +#140870 = VERTEX_POINT('',#140871); +#140871 = CARTESIAN_POINT('',(84.425259,-114.727714,1.585)); +#140872 = LINE('',#140873,#140874); +#140873 = CARTESIAN_POINT('',(84.569021,-115.01905,1.585)); +#140874 = VECTOR('',#140875,1.); +#140875 = DIRECTION('',(-0.442513949871,0.896761620593,0.)); +#140876 = ORIENTED_EDGE('',*,*,#140877,.T.); +#140877 = EDGE_CURVE('',#140870,#140878,#140880,.T.); +#140878 = VERTEX_POINT('',#140879); +#140879 = CARTESIAN_POINT('',(84.688432,-114.596129,1.585)); +#140880 = CIRCLE('',#140881,0.150000402282); +#140881 = AXIS2_PLACEMENT_3D('',#140882,#140883,#140884); +#140882 = CARTESIAN_POINT('',(84.56993324255,-114.6880972834,1.585)); +#140883 = DIRECTION('',(0.,0.,-1.)); +#140884 = DIRECTION('',(-0.96449236368,-0.264110735115,-0.)); +#140885 = ORIENTED_EDGE('',*,*,#140886,.T.); +#140886 = EDGE_CURVE('',#140878,#140777,#140887,.T.); +#140887 = LINE('',#140888,#140889); +#140888 = CARTESIAN_POINT('',(84.688432,-114.596129,1.585)); +#140889 = VECTOR('',#140890,1.); +#140890 = DIRECTION('',(0.456337685543,-0.889806673808,0.)); +#140891 = PLANE('',#140892); +#140892 = AXIS2_PLACEMENT_3D('',#140893,#140894,#140895); +#140893 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140894 = DIRECTION('',(0.,0.,1.)); +#140895 = DIRECTION('',(1.,0.,-0.)); +#140896 = SHELL_BASED_SURFACE_MODEL('',(#140897)); +#140897 = OPEN_SHELL('',(#140898)); +#140898 = ADVANCED_FACE('',(#140899),#140935,.T.); +#140899 = FACE_BOUND('',#140900,.F.); +#140900 = EDGE_LOOP('',(#140901,#140912,#140920,#140929)); +#140901 = ORIENTED_EDGE('',*,*,#140902,.T.); +#140902 = EDGE_CURVE('',#140903,#140905,#140907,.T.); +#140903 = VERTEX_POINT('',#140904); +#140904 = CARTESIAN_POINT('',(92.05107,-115.8731,1.585)); +#140905 = VERTEX_POINT('',#140906); +#140906 = CARTESIAN_POINT('',(92.05107,-115.7531,1.585)); +#140907 = CIRCLE('',#140908,6.000000000042E-02); +#140908 = AXIS2_PLACEMENT_3D('',#140909,#140910,#140911); +#140909 = CARTESIAN_POINT('',(92.051069774412,-115.8131,1.585)); +#140910 = DIRECTION('',(0.,0.,-1.)); +#140911 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140912 = ORIENTED_EDGE('',*,*,#140913,.T.); +#140913 = EDGE_CURVE('',#140905,#140914,#140916,.T.); +#140914 = VERTEX_POINT('',#140915); +#140915 = CARTESIAN_POINT('',(92.33223,-115.7531,1.585)); +#140916 = LINE('',#140917,#140918); +#140917 = CARTESIAN_POINT('',(92.05107,-115.7531,1.585)); +#140918 = VECTOR('',#140919,1.); +#140919 = DIRECTION('',(1.,0.,0.)); +#140920 = ORIENTED_EDGE('',*,*,#140921,.T.); +#140921 = EDGE_CURVE('',#140914,#140922,#140924,.T.); +#140922 = VERTEX_POINT('',#140923); +#140923 = CARTESIAN_POINT('',(92.33223,-115.8731,1.585)); +#140924 = CIRCLE('',#140925,6.000000000042E-02); +#140925 = AXIS2_PLACEMENT_3D('',#140926,#140927,#140928); +#140926 = CARTESIAN_POINT('',(92.332230225588,-115.8131,1.585)); +#140927 = DIRECTION('',(0.,0.,-1.)); +#140928 = DIRECTION('',(-3.759794490532E-06,0.999999999993,-0.)); +#140929 = ORIENTED_EDGE('',*,*,#140930,.T.); +#140930 = EDGE_CURVE('',#140922,#140903,#140931,.T.); +#140931 = LINE('',#140932,#140933); +#140932 = CARTESIAN_POINT('',(92.33223,-115.8731,1.585)); +#140933 = VECTOR('',#140934,1.); +#140934 = DIRECTION('',(-1.,0.,0.)); +#140935 = PLANE('',#140936); +#140936 = AXIS2_PLACEMENT_3D('',#140937,#140938,#140939); +#140937 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140938 = DIRECTION('',(0.,0.,1.)); +#140939 = DIRECTION('',(1.,0.,-0.)); +#140940 = SHELL_BASED_SURFACE_MODEL('',(#140941)); +#140941 = OPEN_SHELL('',(#140942)); +#140942 = ADVANCED_FACE('',(#140943),#140979,.T.); +#140943 = FACE_BOUND('',#140944,.F.); +#140944 = EDGE_LOOP('',(#140945,#140956,#140964,#140973)); +#140945 = ORIENTED_EDGE('',*,*,#140946,.T.); +#140946 = EDGE_CURVE('',#140947,#140949,#140951,.T.); +#140947 = VERTEX_POINT('',#140948); +#140948 = CARTESIAN_POINT('',(96.05107,-115.8731,1.585)); +#140949 = VERTEX_POINT('',#140950); +#140950 = CARTESIAN_POINT('',(96.05107,-115.7531,1.585)); +#140951 = CIRCLE('',#140952,6.000000000042E-02); +#140952 = AXIS2_PLACEMENT_3D('',#140953,#140954,#140955); +#140953 = CARTESIAN_POINT('',(96.051069774412,-115.8131,1.585)); +#140954 = DIRECTION('',(0.,0.,-1.)); +#140955 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#140956 = ORIENTED_EDGE('',*,*,#140957,.T.); +#140957 = EDGE_CURVE('',#140949,#140958,#140960,.T.); +#140958 = VERTEX_POINT('',#140959); +#140959 = CARTESIAN_POINT('',(96.33223,-115.7531,1.585)); +#140960 = LINE('',#140961,#140962); +#140961 = CARTESIAN_POINT('',(96.05107,-115.7531,1.585)); +#140962 = VECTOR('',#140963,1.); +#140963 = DIRECTION('',(1.,0.,0.)); +#140964 = ORIENTED_EDGE('',*,*,#140965,.T.); +#140965 = EDGE_CURVE('',#140958,#140966,#140968,.T.); +#140966 = VERTEX_POINT('',#140967); +#140967 = CARTESIAN_POINT('',(96.33223,-115.8731,1.585)); +#140968 = CIRCLE('',#140969,6.000000000042E-02); +#140969 = AXIS2_PLACEMENT_3D('',#140970,#140971,#140972); +#140970 = CARTESIAN_POINT('',(96.332230225588,-115.8131,1.585)); +#140971 = DIRECTION('',(0.,0.,-1.)); +#140972 = DIRECTION('',(-3.759794490532E-06,0.999999999993,-0.)); +#140973 = ORIENTED_EDGE('',*,*,#140974,.T.); +#140974 = EDGE_CURVE('',#140966,#140947,#140975,.T.); +#140975 = LINE('',#140976,#140977); +#140976 = CARTESIAN_POINT('',(96.33223,-115.8731,1.585)); +#140977 = VECTOR('',#140978,1.); +#140978 = DIRECTION('',(-1.,0.,0.)); +#140979 = PLANE('',#140980); +#140980 = AXIS2_PLACEMENT_3D('',#140981,#140982,#140983); +#140981 = CARTESIAN_POINT('',(0.,0.,1.585)); +#140982 = DIRECTION('',(0.,0.,1.)); +#140983 = DIRECTION('',(1.,0.,-0.)); +#140984 = SHELL_BASED_SURFACE_MODEL('',(#140985)); +#140985 = OPEN_SHELL('',(#140986)); +#140986 = ADVANCED_FACE('',(#140987),#141023,.T.); +#140987 = FACE_BOUND('',#140988,.F.); +#140988 = EDGE_LOOP('',(#140989,#141000,#141008,#141017)); +#140989 = ORIENTED_EDGE('',*,*,#140990,.T.); +#140990 = EDGE_CURVE('',#140991,#140993,#140995,.T.); +#140991 = VERTEX_POINT('',#140992); +#140992 = CARTESIAN_POINT('',(179.454392,-115.8606,1.585)); +#140993 = VERTEX_POINT('',#140994); +#140994 = CARTESIAN_POINT('',(179.454392,-115.7406,1.585)); +#140995 = CIRCLE('',#140996,6.000000000042E-02); +#140996 = AXIS2_PLACEMENT_3D('',#140997,#140998,#140999); +#140997 = CARTESIAN_POINT('',(179.45439177441,-115.8006,1.585)); +#140998 = DIRECTION('',(0.,0.,-1.)); +#140999 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#141000 = ORIENTED_EDGE('',*,*,#141001,.T.); +#141001 = EDGE_CURVE('',#140993,#141002,#141004,.T.); +#141002 = VERTEX_POINT('',#141003); +#141003 = CARTESIAN_POINT('',(179.928908,-115.7406,1.585)); +#141004 = LINE('',#141005,#141006); +#141005 = CARTESIAN_POINT('',(179.454392,-115.7406,1.585)); +#141006 = VECTOR('',#141007,1.); +#141007 = DIRECTION('',(1.,0.,0.)); +#141008 = ORIENTED_EDGE('',*,*,#141009,.T.); +#141009 = EDGE_CURVE('',#141002,#141010,#141012,.T.); +#141010 = VERTEX_POINT('',#141011); +#141011 = CARTESIAN_POINT('',(179.928908,-115.8606,1.585)); +#141012 = CIRCLE('',#141013,6.000000000042E-02); +#141013 = AXIS2_PLACEMENT_3D('',#141014,#141015,#141016); +#141014 = CARTESIAN_POINT('',(179.92890822558,-115.8006,1.585)); +#141015 = DIRECTION('',(0.,0.,-1.)); +#141016 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#141017 = ORIENTED_EDGE('',*,*,#141018,.T.); +#141018 = EDGE_CURVE('',#141010,#140991,#141019,.T.); +#141019 = LINE('',#141020,#141021); +#141020 = CARTESIAN_POINT('',(179.928908,-115.8606,1.585)); +#141021 = VECTOR('',#141022,1.); +#141022 = DIRECTION('',(-1.,0.,0.)); +#141023 = PLANE('',#141024); +#141024 = AXIS2_PLACEMENT_3D('',#141025,#141026,#141027); +#141025 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141026 = DIRECTION('',(0.,0.,1.)); +#141027 = DIRECTION('',(1.,0.,-0.)); +#141028 = SHELL_BASED_SURFACE_MODEL('',(#141029)); +#141029 = OPEN_SHELL('',(#141030)); +#141030 = ADVANCED_FACE('',(#141031,#141133),#141201,.T.); +#141031 = FACE_BOUND('',#141032,.F.); +#141032 = EDGE_LOOP('',(#141033,#141044,#141052,#141060,#141069,#141077, + #141086,#141094,#141102,#141111,#141119,#141127)); +#141033 = ORIENTED_EDGE('',*,*,#141034,.T.); +#141034 = EDGE_CURVE('',#141035,#141037,#141039,.T.); +#141035 = VERTEX_POINT('',#141036); +#141036 = CARTESIAN_POINT('',(181.007125,-114.618892,1.585)); +#141037 = VERTEX_POINT('',#141038); +#141038 = CARTESIAN_POINT('',(181.093989,-114.62242,1.585)); +#141039 = CIRCLE('',#141040,7.226649079677E-02); +#141040 = AXIS2_PLACEMENT_3D('',#141041,#141042,#141043); +#141041 = CARTESIAN_POINT('',(181.04821412996,-114.6783405415,1.585)); +#141042 = DIRECTION('',(0.,0.,-1.)); +#141043 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#141044 = ORIENTED_EDGE('',*,*,#141045,.T.); +#141045 = EDGE_CURVE('',#141037,#141046,#141048,.T.); +#141046 = VERTEX_POINT('',#141047); +#141047 = CARTESIAN_POINT('',(181.129399,-114.607693,1.585)); +#141048 = LINE('',#141049,#141050); +#141049 = CARTESIAN_POINT('',(181.093989,-114.62242,1.585)); +#141050 = VECTOR('',#141051,1.); +#141051 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#141052 = ORIENTED_EDGE('',*,*,#141053,.T.); +#141053 = EDGE_CURVE('',#141046,#141054,#141056,.T.); +#141054 = VERTEX_POINT('',#141055); +#141055 = CARTESIAN_POINT('',(181.349139,-114.607693,1.585)); +#141056 = LINE('',#141057,#141058); +#141057 = CARTESIAN_POINT('',(181.129399,-114.607693,1.585)); +#141058 = VECTOR('',#141059,1.); +#141059 = DIRECTION('',(1.,0.,0.)); +#141060 = ORIENTED_EDGE('',*,*,#141061,.T.); +#141061 = EDGE_CURVE('',#141054,#141062,#141064,.T.); +#141062 = VERTEX_POINT('',#141063); +#141063 = CARTESIAN_POINT('',(181.598542,-114.857096,1.585)); +#141064 = CIRCLE('',#141065,0.347870264855); +#141065 = AXIS2_PLACEMENT_3D('',#141066,#141067,#141068); +#141066 = CARTESIAN_POINT('',(181.26181126502,-114.9444237349,1.585)); +#141067 = DIRECTION('',(0.,0.,-1.)); +#141068 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#141069 = ORIENTED_EDGE('',*,*,#141070,.T.); +#141070 = EDGE_CURVE('',#141062,#141071,#141073,.T.); +#141071 = VERTEX_POINT('',#141072); +#141072 = CARTESIAN_POINT('',(181.59732,-115.177252,1.585)); +#141073 = LINE('',#141074,#141075); +#141074 = CARTESIAN_POINT('',(181.598542,-114.857096,1.585)); +#141075 = VECTOR('',#141076,1.); +#141076 = DIRECTION('',(-3.816861463376E-03,-0.999992715758,0.)); +#141077 = ORIENTED_EDGE('',*,*,#141078,.T.); +#141078 = EDGE_CURVE('',#141071,#141079,#141081,.T.); +#141079 = VERTEX_POINT('',#141080); +#141080 = CARTESIAN_POINT('',(181.349139,-115.421478,1.585)); +#141081 = CIRCLE('',#141082,0.348635327447); +#141082 = AXIS2_PLACEMENT_3D('',#141083,#141084,#141085); +#141083 = CARTESIAN_POINT('',(181.26136748129,-115.0840720841,1.585)); +#141084 = DIRECTION('',(0.,0.,-1.)); +#141085 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#141086 = ORIENTED_EDGE('',*,*,#141087,.T.); +#141087 = EDGE_CURVE('',#141079,#141088,#141090,.T.); +#141088 = VERTEX_POINT('',#141089); +#141089 = CARTESIAN_POINT('',(181.123793,-115.420092,1.585)); +#141090 = LINE('',#141091,#141092); +#141091 = CARTESIAN_POINT('',(181.349139,-115.421478,1.585)); +#141092 = VECTOR('',#141093,1.); +#141093 = DIRECTION('',(-0.999981085954,6.150425501802E-03,0.)); +#141094 = ORIENTED_EDGE('',*,*,#141095,.T.); +#141095 = EDGE_CURVE('',#141088,#141096,#141098,.T.); +#141096 = VERTEX_POINT('',#141097); +#141097 = CARTESIAN_POINT('',(181.122352,-115.695884,1.585)); +#141098 = LINE('',#141099,#141100); +#141099 = CARTESIAN_POINT('',(181.123793,-115.420092,1.585)); +#141100 = VECTOR('',#141101,1.); +#141101 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#141102 = ORIENTED_EDGE('',*,*,#141103,.T.); +#141103 = EDGE_CURVE('',#141096,#141104,#141106,.T.); +#141104 = VERTEX_POINT('',#141105); +#141105 = CARTESIAN_POINT('',(180.973793,-115.681252,1.585)); +#141106 = CIRCLE('',#141107,7.500006711465E-02); +#141107 = AXIS2_PLACEMENT_3D('',#141108,#141109,#141110); +#141108 = CARTESIAN_POINT('',(181.04879306711,-115.6812520671,1.585)); +#141109 = DIRECTION('',(-0.,0.,-1.)); +#141110 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#141111 = ORIENTED_EDGE('',*,*,#141112,.T.); +#141112 = EDGE_CURVE('',#141104,#141113,#141115,.T.); +#141113 = VERTEX_POINT('',#141114); +#141114 = CARTESIAN_POINT('',(180.975234,-114.66662,1.585)); +#141115 = LINE('',#141116,#141117); +#141116 = CARTESIAN_POINT('',(180.973793,-115.681252,1.585)); +#141117 = VECTOR('',#141118,1.); +#141118 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#141119 = ORIENTED_EDGE('',*,*,#141120,.T.); +#141120 = EDGE_CURVE('',#141113,#141121,#141123,.T.); +#141121 = VERTEX_POINT('',#141122); +#141122 = CARTESIAN_POINT('',(180.986433,-114.639584,1.585)); +#141123 = LINE('',#141124,#141125); +#141124 = CARTESIAN_POINT('',(180.975234,-114.66662,1.585)); +#141125 = VECTOR('',#141126,1.); +#141126 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#141127 = ORIENTED_EDGE('',*,*,#141128,.T.); +#141128 = EDGE_CURVE('',#141121,#141035,#141129,.T.); +#141129 = LINE('',#141130,#141131); +#141130 = CARTESIAN_POINT('',(180.986433,-114.639584,1.585)); +#141131 = VECTOR('',#141132,1.); +#141132 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#141133 = FACE_BOUND('',#141134,.F.); +#141134 = EDGE_LOOP('',(#141135,#141146,#141154,#141162,#141170,#141178, + #141186,#141195)); +#141135 = ORIENTED_EDGE('',*,*,#141136,.T.); +#141136 = EDGE_CURVE('',#141137,#141139,#141141,.T.); +#141137 = VERTEX_POINT('',#141138); +#141138 = CARTESIAN_POINT('',(181.449983,-114.889433,1.585)); +#141139 = VERTEX_POINT('',#141140); +#141140 = CARTESIAN_POINT('',(181.316802,-114.756252,1.585)); +#141141 = CIRCLE('',#141142,0.18686440374); +#141142 = AXIS2_PLACEMENT_3D('',#141143,#141144,#141145); +#141143 = CARTESIAN_POINT('',(181.269266,-114.936969,1.585)); +#141144 = DIRECTION('',(0.,0.,1.)); +#141145 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#141146 = ORIENTED_EDGE('',*,*,#141147,.T.); +#141147 = EDGE_CURVE('',#141139,#141148,#141150,.T.); +#141148 = VERTEX_POINT('',#141149); +#141149 = CARTESIAN_POINT('',(181.161736,-114.756252,1.585)); +#141150 = LINE('',#141151,#141152); +#141151 = CARTESIAN_POINT('',(181.316802,-114.756252,1.585)); +#141152 = VECTOR('',#141153,1.); +#141153 = DIRECTION('',(-1.,0.,0.)); +#141154 = ORIENTED_EDGE('',*,*,#141155,.T.); +#141155 = EDGE_CURVE('',#141148,#141156,#141158,.T.); +#141156 = VERTEX_POINT('',#141157); +#141157 = CARTESIAN_POINT('',(181.123793,-114.775223,1.585)); +#141158 = LINE('',#141159,#141160); +#141159 = CARTESIAN_POINT('',(181.161736,-114.756252,1.585)); +#141160 = VECTOR('',#141161,1.); +#141161 = DIRECTION('',(-0.894431905558,-0.447204166259,0.)); +#141162 = ORIENTED_EDGE('',*,*,#141163,.T.); +#141163 = EDGE_CURVE('',#141156,#141164,#141166,.T.); +#141164 = VERTEX_POINT('',#141165); +#141165 = CARTESIAN_POINT('',(181.123793,-115.253947,1.585)); +#141166 = LINE('',#141167,#141168); +#141167 = CARTESIAN_POINT('',(181.123793,-114.775223,1.585)); +#141168 = VECTOR('',#141169,1.); +#141169 = DIRECTION('',(0.,-1.,0.)); +#141170 = ORIENTED_EDGE('',*,*,#141171,.T.); +#141171 = EDGE_CURVE('',#141164,#141172,#141174,.T.); +#141172 = VERTEX_POINT('',#141173); +#141173 = CARTESIAN_POINT('',(181.161736,-115.272919,1.585)); +#141174 = LINE('',#141175,#141176); +#141175 = CARTESIAN_POINT('',(181.123793,-115.253947,1.585)); +#141176 = VECTOR('',#141177,1.); +#141177 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#141178 = ORIENTED_EDGE('',*,*,#141179,.T.); +#141179 = EDGE_CURVE('',#141172,#141180,#141182,.T.); +#141180 = VERTEX_POINT('',#141181); +#141181 = CARTESIAN_POINT('',(181.316802,-115.272919,1.585)); +#141182 = LINE('',#141183,#141184); +#141183 = CARTESIAN_POINT('',(181.161736,-115.272919,1.585)); +#141184 = VECTOR('',#141185,1.); +#141185 = DIRECTION('',(1.,0.,0.)); +#141186 = ORIENTED_EDGE('',*,*,#141187,.T.); +#141187 = EDGE_CURVE('',#141180,#141188,#141190,.T.); +#141188 = VERTEX_POINT('',#141189); +#141189 = CARTESIAN_POINT('',(181.449983,-115.139737,1.585)); +#141190 = CIRCLE('',#141191,0.186867760544); +#141191 = AXIS2_PLACEMENT_3D('',#141192,#141193,#141194); +#141192 = CARTESIAN_POINT('',(181.26926296928,-115.0921993262,1.585)); +#141193 = DIRECTION('',(0.,0.,1.)); +#141194 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#141195 = ORIENTED_EDGE('',*,*,#141196,.T.); +#141196 = EDGE_CURVE('',#141188,#141137,#141197,.T.); +#141197 = LINE('',#141198,#141199); +#141198 = CARTESIAN_POINT('',(181.449983,-115.139737,1.585)); +#141199 = VECTOR('',#141200,1.); +#141200 = DIRECTION('',(0.,1.,0.)); +#141201 = PLANE('',#141202); +#141202 = AXIS2_PLACEMENT_3D('',#141203,#141204,#141205); +#141203 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141204 = DIRECTION('',(0.,0.,1.)); +#141205 = DIRECTION('',(1.,0.,-0.)); +#141206 = SHELL_BASED_SURFACE_MODEL('',(#141207)); +#141207 = OPEN_SHELL('',(#141208)); +#141208 = ADVANCED_FACE('',(#141209),#141269,.T.); +#141209 = FACE_BOUND('',#141210,.F.); +#141210 = EDGE_LOOP('',(#141211,#141222,#141230,#141238,#141246,#141254, + #141263)); +#141211 = ORIENTED_EDGE('',*,*,#141212,.T.); +#141212 = EDGE_CURVE('',#141213,#141215,#141217,.T.); +#141213 = VERTEX_POINT('',#141214); +#141214 = CARTESIAN_POINT('',(199.98165,-115.4331,1.585)); +#141215 = VERTEX_POINT('',#141216); +#141216 = CARTESIAN_POINT('',(199.933126,-115.33781,1.585)); +#141217 = CIRCLE('',#141218,6.000027696175E-02); +#141218 = AXIS2_PLACEMENT_3D('',#141219,#141220,#141221); +#141219 = CARTESIAN_POINT('',(199.98165092846,-115.373099723,1.585)); +#141220 = DIRECTION('',(0.,0.,-1.)); +#141221 = DIRECTION('',(-1.54744015912E-05,-0.99999999988,-0.)); +#141222 = ORIENTED_EDGE('',*,*,#141223,.T.); +#141223 = EDGE_CURVE('',#141215,#141224,#141226,.T.); +#141224 = VERTEX_POINT('',#141225); +#141225 = CARTESIAN_POINT('',(200.173126,-115.00781,1.585)); +#141226 = LINE('',#141227,#141228); +#141227 = CARTESIAN_POINT('',(199.933126,-115.33781,1.585)); +#141228 = VECTOR('',#141229,1.); +#141229 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#141230 = ORIENTED_EDGE('',*,*,#141231,.T.); +#141231 = EDGE_CURVE('',#141224,#141232,#141234,.T.); +#141232 = VERTEX_POINT('',#141233); +#141233 = CARTESIAN_POINT('',(200.212292,-114.983834,1.585)); +#141234 = LINE('',#141235,#141236); +#141235 = CARTESIAN_POINT('',(200.173126,-115.00781,1.585)); +#141236 = VECTOR('',#141237,1.); +#141237 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#141238 = ORIENTED_EDGE('',*,*,#141239,.T.); +#141239 = EDGE_CURVE('',#141232,#141240,#141242,.T.); +#141240 = VERTEX_POINT('',#141241); +#141241 = CARTESIAN_POINT('',(200.25694,-114.994576,1.585)); +#141242 = LINE('',#141243,#141244); +#141243 = CARTESIAN_POINT('',(200.212292,-114.983834,1.585)); +#141244 = VECTOR('',#141245,1.); +#141245 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#141246 = ORIENTED_EDGE('',*,*,#141247,.T.); +#141247 = EDGE_CURVE('',#141240,#141248,#141250,.T.); +#141248 = VERTEX_POINT('',#141249); +#141249 = CARTESIAN_POINT('',(200.510174,-115.33781,1.585)); +#141250 = LINE('',#141251,#141252); +#141251 = CARTESIAN_POINT('',(200.25694,-114.994576,1.585)); +#141252 = VECTOR('',#141253,1.); +#141253 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#141254 = ORIENTED_EDGE('',*,*,#141255,.T.); +#141255 = EDGE_CURVE('',#141248,#141256,#141258,.T.); +#141256 = VERTEX_POINT('',#141257); +#141257 = CARTESIAN_POINT('',(200.46165,-115.4331,1.585)); +#141258 = CIRCLE('',#141259,5.999941814202E-02); +#141259 = AXIS2_PLACEMENT_3D('',#141260,#141261,#141262); +#141260 = CARTESIAN_POINT('',(200.46165075805,-115.3731005818,1.585)); +#141261 = DIRECTION('',(0.,0.,-1.)); +#141262 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#141263 = ORIENTED_EDGE('',*,*,#141264,.T.); +#141264 = EDGE_CURVE('',#141256,#141213,#141265,.T.); +#141265 = LINE('',#141266,#141267); +#141266 = CARTESIAN_POINT('',(200.46165,-115.4331,1.585)); +#141267 = VECTOR('',#141268,1.); +#141268 = DIRECTION('',(-1.,0.,0.)); +#141269 = PLANE('',#141270); +#141270 = AXIS2_PLACEMENT_3D('',#141271,#141272,#141273); +#141271 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141272 = DIRECTION('',(0.,0.,1.)); +#141273 = DIRECTION('',(1.,0.,-0.)); +#141274 = SHELL_BASED_SURFACE_MODEL('',(#141275)); +#141275 = OPEN_SHELL('',(#141276)); +#141276 = ADVANCED_FACE('',(#141277),#141436,.T.); +#141277 = FACE_BOUND('',#141278,.F.); +#141278 = EDGE_LOOP('',(#141279,#141290,#141298,#141306,#141314,#141322, + #141330,#141338,#141347,#141355,#141364,#141372,#141380,#141388, + #141397,#141405,#141413,#141421,#141430)); +#141279 = ORIENTED_EDGE('',*,*,#141280,.T.); +#141280 = EDGE_CURVE('',#141281,#141283,#141285,.T.); +#141281 = VERTEX_POINT('',#141282); +#141282 = CARTESIAN_POINT('',(181.920014,-114.328456,1.585)); +#141283 = VERTEX_POINT('',#141284); +#141284 = CARTESIAN_POINT('',(182.429409,-114.337786,1.585)); +#141285 = CIRCLE('',#141286,0.450326844012); +#141286 = AXIS2_PLACEMENT_3D('',#141287,#141288,#141289); +#141287 = CARTESIAN_POINT('',(182.1679110301,-114.7044098919,1.585)); +#141288 = DIRECTION('',(0.,0.,-1.)); +#141289 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#141290 = ORIENTED_EDGE('',*,*,#141291,.T.); +#141291 = EDGE_CURVE('',#141283,#141292,#141294,.T.); +#141292 = VERTEX_POINT('',#141293); +#141293 = CARTESIAN_POINT('',(182.492862,-114.403316,1.585)); +#141294 = LINE('',#141295,#141296); +#141295 = CARTESIAN_POINT('',(182.429409,-114.337786,1.585)); +#141296 = VECTOR('',#141297,1.); +#141297 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#141298 = ORIENTED_EDGE('',*,*,#141299,.T.); +#141299 = EDGE_CURVE('',#141292,#141300,#141302,.T.); +#141300 = VERTEX_POINT('',#141301); +#141301 = CARTESIAN_POINT('',(182.550923,-114.523763,1.585)); +#141302 = LINE('',#141303,#141304); +#141303 = CARTESIAN_POINT('',(182.492862,-114.403316,1.585)); +#141304 = VECTOR('',#141305,1.); +#141305 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#141306 = ORIENTED_EDGE('',*,*,#141307,.T.); +#141307 = EDGE_CURVE('',#141300,#141308,#141310,.T.); +#141308 = VERTEX_POINT('',#141309); +#141309 = CARTESIAN_POINT('',(182.550164,-114.650095,1.585)); +#141310 = LINE('',#141311,#141312); +#141311 = CARTESIAN_POINT('',(182.550923,-114.523763,1.585)); +#141312 = VECTOR('',#141313,1.); +#141313 = DIRECTION('',(-6.007870547659E-03,-0.999981952583,0.)); +#141314 = ORIENTED_EDGE('',*,*,#141315,.T.); +#141315 = EDGE_CURVE('',#141308,#141316,#141318,.T.); +#141316 = VERTEX_POINT('',#141317); +#141317 = CARTESIAN_POINT('',(182.492106,-114.818158,1.585)); +#141318 = LINE('',#141319,#141320); +#141319 = CARTESIAN_POINT('',(182.550164,-114.650095,1.585)); +#141320 = VECTOR('',#141321,1.); +#141321 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#141322 = ORIENTED_EDGE('',*,*,#141323,.T.); +#141323 = EDGE_CURVE('',#141316,#141324,#141326,.T.); +#141324 = VERTEX_POINT('',#141325); +#141325 = CARTESIAN_POINT('',(182.039383,-115.272919,1.585)); +#141326 = LINE('',#141327,#141328); +#141327 = CARTESIAN_POINT('',(182.492106,-114.818158,1.585)); +#141328 = VECTOR('',#141329,1.); +#141329 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#141330 = ORIENTED_EDGE('',*,*,#141331,.T.); +#141331 = EDGE_CURVE('',#141324,#141332,#141334,.T.); +#141332 = VERTEX_POINT('',#141333); +#141333 = CARTESIAN_POINT('',(182.491996,-115.27436,1.585)); +#141334 = LINE('',#141335,#141336); +#141335 = CARTESIAN_POINT('',(182.039383,-115.272919,1.585)); +#141336 = VECTOR('',#141337,1.); +#141337 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#141338 = ORIENTED_EDGE('',*,*,#141339,.T.); +#141339 = EDGE_CURVE('',#141332,#141340,#141342,.T.); +#141340 = VERTEX_POINT('',#141341); +#141341 = CARTESIAN_POINT('',(182.477364,-115.422919,1.585)); +#141342 = CIRCLE('',#141343,7.500006711463E-02); +#141343 = AXIS2_PLACEMENT_3D('',#141344,#141345,#141346); +#141344 = CARTESIAN_POINT('',(182.47736406711,-115.3479189328,1.585)); +#141345 = DIRECTION('',(0.,0.,-1.)); +#141346 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#141347 = ORIENTED_EDGE('',*,*,#141348,.T.); +#141348 = EDGE_CURVE('',#141340,#141349,#141351,.T.); +#141349 = VERTEX_POINT('',#141350); +#141350 = CARTESIAN_POINT('',(181.843685,-115.421478,1.585)); +#141351 = LINE('',#141352,#141353); +#141352 = CARTESIAN_POINT('',(182.477364,-115.422919,1.585)); +#141353 = VECTOR('',#141354,1.); +#141354 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#141355 = ORIENTED_EDGE('',*,*,#141356,.T.); +#141356 = EDGE_CURVE('',#141349,#141357,#141359,.T.); +#141357 = VERTEX_POINT('',#141358); +#141358 = CARTESIAN_POINT('',(181.805284,-115.294886,1.585)); +#141359 = CIRCLE('',#141360,7.500021013107E-02); +#141360 = AXIS2_PLACEMENT_3D('',#141361,#141362,#141363); +#141361 = CARTESIAN_POINT('',(181.8583173167,-115.3479189976,1.585)); +#141362 = DIRECTION('',(0.,0.,-1.)); +#141363 = DIRECTION('',(-0.195097009435,-0.980783950169,-0.)); +#141364 = ORIENTED_EDGE('',*,*,#141365,.T.); +#141365 = EDGE_CURVE('',#141357,#141366,#141368,.T.); +#141366 = VERTEX_POINT('',#141367); +#141367 = CARTESIAN_POINT('',(182.364192,-114.735976,1.585)); +#141368 = LINE('',#141369,#141370); +#141369 = CARTESIAN_POINT('',(181.805284,-115.294886,1.585)); +#141370 = VECTOR('',#141371,1.); +#141371 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#141372 = ORIENTED_EDGE('',*,*,#141373,.T.); +#141373 = EDGE_CURVE('',#141366,#141374,#141376,.T.); +#141374 = VERTEX_POINT('',#141375); +#141375 = CARTESIAN_POINT('',(182.402364,-114.621463,1.585)); +#141376 = LINE('',#141377,#141378); +#141377 = CARTESIAN_POINT('',(182.364192,-114.735976,1.585)); +#141378 = VECTOR('',#141379,1.); +#141379 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#141380 = ORIENTED_EDGE('',*,*,#141381,.T.); +#141381 = EDGE_CURVE('',#141374,#141382,#141384,.T.); +#141382 = VERTEX_POINT('',#141383); +#141383 = CARTESIAN_POINT('',(182.402364,-114.5561,1.585)); +#141384 = LINE('',#141385,#141386); +#141385 = CARTESIAN_POINT('',(182.402364,-114.621463,1.585)); +#141386 = VECTOR('',#141387,1.); +#141387 = DIRECTION('',(0.,1.,0.)); +#141388 = ORIENTED_EDGE('',*,*,#141389,.T.); +#141389 = EDGE_CURVE('',#141382,#141390,#141392,.T.); +#141390 = VERTEX_POINT('',#141391); +#141391 = CARTESIAN_POINT('',(182.269183,-114.422919,1.585)); +#141392 = CIRCLE('',#141393,0.18686440374); +#141393 = AXIS2_PLACEMENT_3D('',#141394,#141395,#141396); +#141394 = CARTESIAN_POINT('',(182.221647,-114.603636,1.585)); +#141395 = DIRECTION('',(0.,0.,1.)); +#141396 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#141397 = ORIENTED_EDGE('',*,*,#141398,.T.); +#141398 = EDGE_CURVE('',#141390,#141399,#141401,.T.); +#141399 = VERTEX_POINT('',#141400); +#141400 = CARTESIAN_POINT('',(182.066498,-114.422919,1.585)); +#141401 = LINE('',#141402,#141403); +#141402 = CARTESIAN_POINT('',(182.269183,-114.422919,1.585)); +#141403 = VECTOR('',#141404,1.); +#141404 = DIRECTION('',(-1.,0.,0.)); +#141405 = ORIENTED_EDGE('',*,*,#141406,.T.); +#141406 = EDGE_CURVE('',#141399,#141407,#141409,.T.); +#141407 = VERTEX_POINT('',#141408); +#141408 = CARTESIAN_POINT('',(181.997982,-114.457177,1.585)); +#141409 = LINE('',#141410,#141411); +#141410 = CARTESIAN_POINT('',(182.066498,-114.422919,1.585)); +#141411 = VECTOR('',#141412,1.); +#141412 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#141413 = ORIENTED_EDGE('',*,*,#141414,.T.); +#141414 = EDGE_CURVE('',#141407,#141415,#141417,.T.); +#141415 = VERTEX_POINT('',#141416); +#141416 = CARTESIAN_POINT('',(181.947604,-114.505517,1.585)); +#141417 = LINE('',#141418,#141419); +#141418 = CARTESIAN_POINT('',(181.997982,-114.457177,1.585)); +#141419 = VECTOR('',#141420,1.); +#141420 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#141421 = ORIENTED_EDGE('',*,*,#141422,.T.); +#141422 = EDGE_CURVE('',#141415,#141423,#141425,.T.); +#141423 = VERTEX_POINT('',#141424); +#141424 = CARTESIAN_POINT('',(181.852903,-114.390124,1.585)); +#141425 = CIRCLE('',#141426,7.499996838527E-02); +#141426 = AXIS2_PLACEMENT_3D('',#141427,#141428,#141429); +#141427 = CARTESIAN_POINT('',(181.905936,-114.4431569724,1.585)); +#141428 = DIRECTION('',(0.,0.,-1.)); +#141429 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#141430 = ORIENTED_EDGE('',*,*,#141431,.T.); +#141431 = EDGE_CURVE('',#141423,#141281,#141432,.T.); +#141432 = LINE('',#141433,#141434); +#141433 = CARTESIAN_POINT('',(181.852903,-114.390124,1.585)); +#141434 = VECTOR('',#141435,1.); +#141435 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#141436 = PLANE('',#141437); +#141437 = AXIS2_PLACEMENT_3D('',#141438,#141439,#141440); +#141438 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141439 = DIRECTION('',(0.,0.,1.)); +#141440 = DIRECTION('',(1.,0.,-0.)); +#141441 = SHELL_BASED_SURFACE_MODEL('',(#141442)); +#141442 = OPEN_SHELL('',(#141443)); +#141443 = ADVANCED_FACE('',(#141444,#141555),#141607,.T.); +#141444 = FACE_BOUND('',#141445,.F.); +#141445 = EDGE_LOOP('',(#141446,#141457,#141465,#141474,#141482,#141491, + #141499,#141507,#141516,#141524,#141532,#141540,#141549)); +#141446 = ORIENTED_EDGE('',*,*,#141447,.T.); +#141447 = EDGE_CURVE('',#141448,#141450,#141452,.T.); +#141448 = VERTEX_POINT('',#141449); +#141449 = CARTESIAN_POINT('',(176.879996,-114.333287,1.585)); +#141450 = VERTEX_POINT('',#141451); +#141451 = CARTESIAN_POINT('',(176.953555,-114.272919,1.585)); +#141452 = CIRCLE('',#141453,7.500074938986E-02); +#141453 = AXIS2_PLACEMENT_3D('',#141454,#141455,#141456); +#141454 = CARTESIAN_POINT('',(176.95355546611,-114.3479197493,1.585)); +#141455 = DIRECTION('',(0.,0.,-1.)); +#141456 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#141457 = ORIENTED_EDGE('',*,*,#141458,.T.); +#141458 = EDGE_CURVE('',#141450,#141459,#141461,.T.); +#141459 = VERTEX_POINT('',#141460); +#141460 = CARTESIAN_POINT('',(177.349139,-114.27436,1.585)); +#141461 = LINE('',#141462,#141463); +#141462 = CARTESIAN_POINT('',(176.953555,-114.272919,1.585)); +#141463 = VECTOR('',#141464,1.); +#141464 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#141465 = ORIENTED_EDGE('',*,*,#141466,.T.); +#141466 = EDGE_CURVE('',#141459,#141467,#141469,.T.); +#141467 = VERTEX_POINT('',#141468); +#141468 = CARTESIAN_POINT('',(177.598542,-114.523763,1.585)); +#141469 = CIRCLE('',#141470,0.347870264855); +#141470 = AXIS2_PLACEMENT_3D('',#141471,#141472,#141473); +#141471 = CARTESIAN_POINT('',(177.26181126502,-114.6110907349,1.585)); +#141472 = DIRECTION('',(0.,0.,-1.)); +#141473 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#141474 = ORIENTED_EDGE('',*,*,#141475,.T.); +#141475 = EDGE_CURVE('',#141467,#141476,#141478,.T.); +#141476 = VERTEX_POINT('',#141477); +#141477 = CARTESIAN_POINT('',(177.59732,-114.701062,1.585)); +#141478 = LINE('',#141479,#141480); +#141479 = CARTESIAN_POINT('',(177.598542,-114.523763,1.585)); +#141480 = VECTOR('',#141481,1.); +#141481 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#141482 = ORIENTED_EDGE('',*,*,#141483,.T.); +#141483 = EDGE_CURVE('',#141476,#141484,#141486,.T.); +#141484 = VERTEX_POINT('',#141485); +#141485 = CARTESIAN_POINT('',(177.349139,-114.945287,1.585)); +#141486 = CIRCLE('',#141487,0.348632345849); +#141487 = AXIS2_PLACEMENT_3D('',#141488,#141489,#141490); +#141488 = CARTESIAN_POINT('',(177.26137019403,-114.6078834593,1.585)); +#141489 = DIRECTION('',(0.,0.,-1.)); +#141490 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#141491 = ORIENTED_EDGE('',*,*,#141492,.T.); +#141492 = EDGE_CURVE('',#141484,#141493,#141495,.T.); +#141493 = VERTEX_POINT('',#141494); +#141494 = CARTESIAN_POINT('',(177.335622,-114.946618,1.585)); +#141495 = LINE('',#141496,#141497); +#141496 = CARTESIAN_POINT('',(177.349139,-114.945287,1.585)); +#141497 = VECTOR('',#141498,1.); +#141498 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#141499 = ORIENTED_EDGE('',*,*,#141500,.T.); +#141500 = EDGE_CURVE('',#141493,#141501,#141503,.T.); +#141501 = VERTEX_POINT('',#141502); +#141502 = CARTESIAN_POINT('',(177.593636,-115.317723,1.585)); +#141503 = LINE('',#141504,#141505); +#141504 = CARTESIAN_POINT('',(177.335622,-114.946618,1.585)); +#141505 = VECTOR('',#141506,1.); +#141506 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#141507 = ORIENTED_EDGE('',*,*,#141508,.T.); +#141508 = EDGE_CURVE('',#141501,#141509,#141511,.T.); +#141509 = VERTEX_POINT('',#141510); +#141510 = CARTESIAN_POINT('',(177.463541,-115.390929,1.585)); +#141511 = CIRCLE('',#141512,7.500005951703E-02); +#141512 = AXIS2_PLACEMENT_3D('',#141513,#141514,#141515); +#141513 = CARTESIAN_POINT('',(177.52498306294,-115.3479187473,1.585)); +#141514 = DIRECTION('',(0.,0.,-1.)); +#141515 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#141516 = ORIENTED_EDGE('',*,*,#141517,.T.); +#141517 = EDGE_CURVE('',#141509,#141518,#141520,.T.); +#141518 = VERTEX_POINT('',#141519); +#141519 = CARTESIAN_POINT('',(177.152601,-114.946728,1.585)); +#141520 = LINE('',#141521,#141522); +#141521 = CARTESIAN_POINT('',(177.463541,-115.390929,1.585)); +#141522 = VECTOR('',#141523,1.); +#141523 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#141524 = ORIENTED_EDGE('',*,*,#141525,.T.); +#141525 = EDGE_CURVE('',#141518,#141526,#141528,.T.); +#141526 = VERTEX_POINT('',#141527); +#141527 = CARTESIAN_POINT('',(177.028555,-114.946728,1.585)); +#141528 = LINE('',#141529,#141530); +#141529 = CARTESIAN_POINT('',(177.152601,-114.946728,1.585)); +#141530 = VECTOR('',#141531,1.); +#141531 = DIRECTION('',(-1.,0.,0.)); +#141532 = ORIENTED_EDGE('',*,*,#141533,.T.); +#141533 = EDGE_CURVE('',#141526,#141534,#141536,.T.); +#141534 = VERTEX_POINT('',#141535); +#141535 = CARTESIAN_POINT('',(177.027114,-115.362551,1.585)); +#141536 = LINE('',#141537,#141538); +#141537 = CARTESIAN_POINT('',(177.028555,-114.946728,1.585)); +#141538 = VECTOR('',#141539,1.); +#141539 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#141540 = ORIENTED_EDGE('',*,*,#141541,.T.); +#141541 = EDGE_CURVE('',#141534,#141542,#141544,.T.); +#141542 = VERTEX_POINT('',#141543); +#141543 = CARTESIAN_POINT('',(176.878555,-115.347919,1.585)); +#141544 = CIRCLE('',#141545,7.500006711464E-02); +#141545 = AXIS2_PLACEMENT_3D('',#141546,#141547,#141548); +#141546 = CARTESIAN_POINT('',(176.95355506711,-115.3479190671,1.585)); +#141547 = DIRECTION('',(-0.,0.,-1.)); +#141548 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#141549 = ORIENTED_EDGE('',*,*,#141550,.T.); +#141550 = EDGE_CURVE('',#141542,#141448,#141551,.T.); +#141551 = LINE('',#141552,#141553); +#141552 = CARTESIAN_POINT('',(176.878555,-115.347919,1.585)); +#141553 = VECTOR('',#141554,1.); +#141554 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#141555 = FACE_BOUND('',#141556,.F.); +#141556 = EDGE_LOOP('',(#141557,#141568,#141576,#141584,#141592,#141601) + ); +#141557 = ORIENTED_EDGE('',*,*,#141558,.T.); +#141558 = EDGE_CURVE('',#141559,#141561,#141563,.T.); +#141559 = VERTEX_POINT('',#141560); +#141560 = CARTESIAN_POINT('',(177.449983,-114.5561,1.585)); +#141561 = VERTEX_POINT('',#141562); +#141562 = CARTESIAN_POINT('',(177.316802,-114.422919,1.585)); +#141563 = CIRCLE('',#141564,0.18686440374); +#141564 = AXIS2_PLACEMENT_3D('',#141565,#141566,#141567); +#141565 = CARTESIAN_POINT('',(177.269266,-114.603636,1.585)); +#141566 = DIRECTION('',(0.,0.,1.)); +#141567 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#141568 = ORIENTED_EDGE('',*,*,#141569,.T.); +#141569 = EDGE_CURVE('',#141561,#141570,#141572,.T.); +#141570 = VERTEX_POINT('',#141571); +#141571 = CARTESIAN_POINT('',(177.028555,-114.422919,1.585)); +#141572 = LINE('',#141573,#141574); +#141573 = CARTESIAN_POINT('',(177.316802,-114.422919,1.585)); +#141574 = VECTOR('',#141575,1.); +#141575 = DIRECTION('',(-1.,0.,0.)); +#141576 = ORIENTED_EDGE('',*,*,#141577,.T.); +#141577 = EDGE_CURVE('',#141570,#141578,#141580,.T.); +#141578 = VERTEX_POINT('',#141579); +#141579 = CARTESIAN_POINT('',(177.028555,-114.796728,1.585)); +#141580 = LINE('',#141581,#141582); +#141581 = CARTESIAN_POINT('',(177.028555,-114.422919,1.585)); +#141582 = VECTOR('',#141583,1.); +#141583 = DIRECTION('',(0.,-1.,0.)); +#141584 = ORIENTED_EDGE('',*,*,#141585,.T.); +#141585 = EDGE_CURVE('',#141578,#141586,#141588,.T.); +#141586 = VERTEX_POINT('',#141587); +#141587 = CARTESIAN_POINT('',(177.316802,-114.796728,1.585)); +#141588 = LINE('',#141589,#141590); +#141589 = CARTESIAN_POINT('',(177.028555,-114.796728,1.585)); +#141590 = VECTOR('',#141591,1.); +#141591 = DIRECTION('',(1.,0.,0.)); +#141592 = ORIENTED_EDGE('',*,*,#141593,.T.); +#141593 = EDGE_CURVE('',#141586,#141594,#141596,.T.); +#141594 = VERTEX_POINT('',#141595); +#141595 = CARTESIAN_POINT('',(177.449983,-114.663547,1.585)); +#141596 = CIRCLE('',#141597,0.18686440374); +#141597 = AXIS2_PLACEMENT_3D('',#141598,#141599,#141600); +#141598 = CARTESIAN_POINT('',(177.269266,-114.616011,1.585)); +#141599 = DIRECTION('',(0.,0.,1.)); +#141600 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#141601 = ORIENTED_EDGE('',*,*,#141602,.T.); +#141602 = EDGE_CURVE('',#141594,#141559,#141603,.T.); +#141603 = LINE('',#141604,#141605); +#141604 = CARTESIAN_POINT('',(177.449983,-114.663547,1.585)); +#141605 = VECTOR('',#141606,1.); +#141606 = DIRECTION('',(0.,1.,0.)); +#141607 = PLANE('',#141608); +#141608 = AXIS2_PLACEMENT_3D('',#141609,#141610,#141611); +#141609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141610 = DIRECTION('',(0.,0.,1.)); +#141611 = DIRECTION('',(1.,0.,-0.)); +#141612 = SHELL_BASED_SURFACE_MODEL('',(#141613)); +#141613 = OPEN_SHELL('',(#141614)); +#141614 = ADVANCED_FACE('',(#141615),#141800,.T.); +#141615 = FACE_BOUND('',#141616,.F.); +#141616 = EDGE_LOOP('',(#141617,#141628,#141636,#141645,#141653,#141662, + #141670,#141679,#141687,#141695,#141703,#141712,#141720,#141729, + #141737,#141746,#141754,#141762,#141770,#141778,#141786,#141794)); +#141617 = ORIENTED_EDGE('',*,*,#141618,.T.); +#141618 = EDGE_CURVE('',#141619,#141621,#141623,.T.); +#141619 = VERTEX_POINT('',#141620); +#141620 = CARTESIAN_POINT('',(91.559269,-114.330381,1.585)); +#141621 = VERTEX_POINT('',#141622); +#141622 = CARTESIAN_POINT('',(92.019032,-114.333178,1.585)); +#141623 = CIRCLE('',#141624,0.460785175821); +#141624 = AXIS2_PLACEMENT_3D('',#141625,#141626,#141627); +#141625 = CARTESIAN_POINT('',(91.786721108972,-114.7311159702,1.585)); +#141626 = DIRECTION('',(0.,0.,-1.)); +#141627 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#141628 = ORIENTED_EDGE('',*,*,#141629,.T.); +#141629 = EDGE_CURVE('',#141621,#141630,#141632,.T.); +#141630 = VERTEX_POINT('',#141631); +#141631 = CARTESIAN_POINT('',(92.087343,-114.401489,1.585)); +#141632 = LINE('',#141633,#141634); +#141633 = CARTESIAN_POINT('',(92.019032,-114.333178,1.585)); +#141634 = VECTOR('',#141635,1.); +#141635 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#141636 = ORIENTED_EDGE('',*,*,#141637,.T.); +#141637 = EDGE_CURVE('',#141630,#141638,#141640,.T.); +#141638 = VERTEX_POINT('',#141639); +#141639 = CARTESIAN_POINT('',(91.97195,-114.49619,1.585)); +#141640 = CIRCLE('',#141641,7.500003178655E-02); +#141641 = AXIS2_PLACEMENT_3D('',#141642,#141643,#141644); +#141642 = CARTESIAN_POINT('',(92.024982562127,-114.4431565,1.585)); +#141643 = DIRECTION('',(0.,0.,-1.)); +#141644 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#141645 = ORIENTED_EDGE('',*,*,#141646,.T.); +#141646 = EDGE_CURVE('',#141638,#141647,#141649,.T.); +#141647 = VERTEX_POINT('',#141648); +#141648 = CARTESIAN_POINT('',(91.93685,-114.46109,1.585)); +#141649 = LINE('',#141650,#141651); +#141650 = CARTESIAN_POINT('',(91.97195,-114.49619,1.585)); +#141651 = VECTOR('',#141652,1.); +#141652 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#141653 = ORIENTED_EDGE('',*,*,#141654,.T.); +#141654 = EDGE_CURVE('',#141647,#141655,#141657,.T.); +#141655 = VERTEX_POINT('',#141656); +#141656 = CARTESIAN_POINT('',(91.636926,-114.46109,1.585)); +#141657 = CIRCLE('',#141658,0.299308637371); +#141658 = AXIS2_PLACEMENT_3D('',#141659,#141660,#141661); +#141659 = CARTESIAN_POINT('',(91.786888,-114.720121,1.585)); +#141660 = DIRECTION('',(0.,0.,1.)); +#141661 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#141662 = ORIENTED_EDGE('',*,*,#141663,.T.); +#141663 = EDGE_CURVE('',#141655,#141664,#141666,.T.); +#141664 = VERTEX_POINT('',#141665); +#141665 = CARTESIAN_POINT('',(91.562813,-114.535203,1.585)); +#141666 = LINE('',#141667,#141668); +#141667 = CARTESIAN_POINT('',(91.636926,-114.46109,1.585)); +#141668 = VECTOR('',#141669,1.); +#141669 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#141670 = ORIENTED_EDGE('',*,*,#141671,.T.); +#141671 = EDGE_CURVE('',#141664,#141672,#141674,.T.); +#141672 = VERTEX_POINT('',#141673); +#141673 = CARTESIAN_POINT('',(91.480936,-114.910113,1.585)); +#141674 = CIRCLE('',#141675,0.611712714363); +#141675 = AXIS2_PLACEMENT_3D('',#141676,#141677,#141678); +#141676 = CARTESIAN_POINT('',(92.089341275217,-114.8465876822,1.585)); +#141677 = DIRECTION('',(0.,0.,1.)); +#141678 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#141679 = ORIENTED_EDGE('',*,*,#141680,.T.); +#141680 = EDGE_CURVE('',#141672,#141681,#141683,.T.); +#141681 = VERTEX_POINT('',#141682); +#141682 = CARTESIAN_POINT('',(91.524319,-115.083647,1.585)); +#141683 = LINE('',#141684,#141685); +#141684 = CARTESIAN_POINT('',(91.480936,-114.910113,1.585)); +#141685 = VECTOR('',#141686,1.); +#141686 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#141687 = ORIENTED_EDGE('',*,*,#141688,.T.); +#141688 = EDGE_CURVE('',#141681,#141689,#141691,.T.); +#141689 = VERTEX_POINT('',#141690); +#141690 = CARTESIAN_POINT('',(91.562813,-115.160634,1.585)); +#141691 = LINE('',#141692,#141693); +#141692 = CARTESIAN_POINT('',(91.524319,-115.083647,1.585)); +#141693 = VECTOR('',#141694,1.); +#141694 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#141695 = ORIENTED_EDGE('',*,*,#141696,.T.); +#141696 = EDGE_CURVE('',#141689,#141697,#141699,.T.); +#141697 = VERTEX_POINT('',#141698); +#141698 = CARTESIAN_POINT('',(91.636926,-115.234748,1.585)); +#141699 = LINE('',#141700,#141701); +#141700 = CARTESIAN_POINT('',(91.562813,-115.160634,1.585)); +#141701 = VECTOR('',#141702,1.); +#141702 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#141703 = ORIENTED_EDGE('',*,*,#141704,.T.); +#141704 = EDGE_CURVE('',#141697,#141705,#141707,.T.); +#141705 = VERTEX_POINT('',#141706); +#141706 = CARTESIAN_POINT('',(91.93685,-115.234747,1.585)); +#141707 = CIRCLE('',#141708,0.299305962385); +#141708 = AXIS2_PLACEMENT_3D('',#141709,#141710,#141711); +#141709 = CARTESIAN_POINT('',(91.786887136355,-114.9757195909,1.585)); +#141710 = DIRECTION('',(0.,0.,1.)); +#141711 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#141712 = ORIENTED_EDGE('',*,*,#141713,.T.); +#141713 = EDGE_CURVE('',#141705,#141714,#141716,.T.); +#141714 = VERTEX_POINT('',#141715); +#141715 = CARTESIAN_POINT('',(91.983315,-115.19032,1.585)); +#141716 = LINE('',#141717,#141718); +#141717 = CARTESIAN_POINT('',(91.93685,-115.234747,1.585)); +#141718 = VECTOR('',#141719,1.); +#141719 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#141720 = ORIENTED_EDGE('',*,*,#141721,.T.); +#141721 = EDGE_CURVE('',#141714,#141722,#141724,.T.); +#141722 = VERTEX_POINT('',#141723); +#141723 = CARTESIAN_POINT('',(92.078016,-115.305713,1.585)); +#141724 = CIRCLE('',#141725,7.499993690112E-02); +#141725 = AXIS2_PLACEMENT_3D('',#141726,#141727,#141728); +#141726 = CARTESIAN_POINT('',(92.024983248309,-115.2526798237,1.585)); +#141727 = DIRECTION('',(0.,0.,-1.)); +#141728 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#141729 = ORIENTED_EDGE('',*,*,#141730,.T.); +#141730 = EDGE_CURVE('',#141722,#141731,#141733,.T.); +#141731 = VERTEX_POINT('',#141732); +#141732 = CARTESIAN_POINT('',(92.014506,-115.365457,1.585)); +#141733 = LINE('',#141734,#141735); +#141734 = CARTESIAN_POINT('',(92.078016,-115.305713,1.585)); +#141735 = VECTOR('',#141736,1.); +#141736 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#141737 = ORIENTED_EDGE('',*,*,#141738,.T.); +#141738 = EDGE_CURVE('',#141731,#141739,#141741,.T.); +#141739 = VERTEX_POINT('',#141740); +#141740 = CARTESIAN_POINT('',(91.554744,-115.362661,1.585)); +#141741 = CIRCLE('',#141742,0.461067828848); +#141742 = AXIS2_PLACEMENT_3D('',#141743,#141744,#141745); +#141743 = CARTESIAN_POINT('',(91.787055512688,-114.9643961335,1.585)); +#141744 = DIRECTION('',(-0.,0.,-1.)); +#141745 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#141746 = ORIENTED_EDGE('',*,*,#141747,.T.); +#141747 = EDGE_CURVE('',#141739,#141748,#141750,.T.); +#141748 = VERTEX_POINT('',#141749); +#141749 = CARTESIAN_POINT('',(91.438055,-115.244898,1.585)); +#141750 = LINE('',#141751,#141752); +#141751 = CARTESIAN_POINT('',(91.554744,-115.362661,1.585)); +#141752 = VECTOR('',#141753,1.); +#141753 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#141754 = ORIENTED_EDGE('',*,*,#141755,.T.); +#141755 = EDGE_CURVE('',#141748,#141756,#141758,.T.); +#141756 = VERTEX_POINT('',#141757); +#141757 = CARTESIAN_POINT('',(91.380794,-115.128013,1.585)); +#141758 = LINE('',#141759,#141760); +#141759 = CARTESIAN_POINT('',(91.438055,-115.244898,1.585)); +#141760 = VECTOR('',#141761,1.); +#141761 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#141762 = ORIENTED_EDGE('',*,*,#141763,.T.); +#141763 = EDGE_CURVE('',#141756,#141764,#141766,.T.); +#141764 = VERTEX_POINT('',#141765); +#141765 = CARTESIAN_POINT('',(91.330936,-114.919347,1.585)); +#141766 = LINE('',#141767,#141768); +#141767 = CARTESIAN_POINT('',(91.380794,-115.128013,1.585)); +#141768 = VECTOR('',#141769,1.); +#141769 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#141770 = ORIENTED_EDGE('',*,*,#141771,.T.); +#141771 = EDGE_CURVE('',#141764,#141772,#141774,.T.); +#141772 = VERTEX_POINT('',#141773); +#141773 = CARTESIAN_POINT('',(91.333175,-114.7583,1.585)); +#141774 = LINE('',#141775,#141776); +#141775 = CARTESIAN_POINT('',(91.330936,-114.919347,1.585)); +#141776 = VECTOR('',#141777,1.); +#141777 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#141778 = ORIENTED_EDGE('',*,*,#141779,.T.); +#141779 = EDGE_CURVE('',#141772,#141780,#141782,.T.); +#141780 = VERTEX_POINT('',#141781); +#141781 = CARTESIAN_POINT('',(91.386473,-114.552473,1.585)); +#141782 = LINE('',#141783,#141784); +#141783 = CARTESIAN_POINT('',(91.333175,-114.7583,1.585)); +#141784 = VECTOR('',#141785,1.); +#141785 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#141786 = ORIENTED_EDGE('',*,*,#141787,.T.); +#141787 = EDGE_CURVE('',#141780,#141788,#141790,.T.); +#141788 = VERTEX_POINT('',#141789); +#141789 = CARTESIAN_POINT('',(91.443422,-114.443492,1.585)); +#141790 = LINE('',#141791,#141792); +#141791 = CARTESIAN_POINT('',(91.386473,-114.552473,1.585)); +#141792 = VECTOR('',#141793,1.); +#141793 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#141794 = ORIENTED_EDGE('',*,*,#141795,.T.); +#141795 = EDGE_CURVE('',#141788,#141619,#141796,.T.); +#141796 = LINE('',#141797,#141798); +#141797 = CARTESIAN_POINT('',(91.443422,-114.443492,1.585)); +#141798 = VECTOR('',#141799,1.); +#141799 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#141800 = PLANE('',#141801); +#141801 = AXIS2_PLACEMENT_3D('',#141802,#141803,#141804); +#141802 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141803 = DIRECTION('',(0.,0.,1.)); +#141804 = DIRECTION('',(1.,0.,-0.)); +#141805 = SHELL_BASED_SURFACE_MODEL('',(#141806)); +#141806 = OPEN_SHELL('',(#141807)); +#141807 = ADVANCED_FACE('',(#141808),#141993,.T.); +#141808 = FACE_BOUND('',#141809,.F.); +#141809 = EDGE_LOOP('',(#141810,#141821,#141829,#141838,#141846,#141855, + #141863,#141872,#141880,#141888,#141896,#141905,#141913,#141922, + #141930,#141939,#141947,#141955,#141963,#141971,#141979,#141987)); +#141810 = ORIENTED_EDGE('',*,*,#141811,.T.); +#141811 = EDGE_CURVE('',#141812,#141814,#141816,.T.); +#141812 = VERTEX_POINT('',#141813); +#141813 = CARTESIAN_POINT('',(95.559269,-114.330381,1.585)); +#141814 = VERTEX_POINT('',#141815); +#141815 = CARTESIAN_POINT('',(96.019032,-114.333178,1.585)); +#141816 = CIRCLE('',#141817,0.460785175821); +#141817 = AXIS2_PLACEMENT_3D('',#141818,#141819,#141820); +#141818 = CARTESIAN_POINT('',(95.786721108972,-114.7311159702,1.585)); +#141819 = DIRECTION('',(0.,0.,-1.)); +#141820 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#141821 = ORIENTED_EDGE('',*,*,#141822,.T.); +#141822 = EDGE_CURVE('',#141814,#141823,#141825,.T.); +#141823 = VERTEX_POINT('',#141824); +#141824 = CARTESIAN_POINT('',(96.087343,-114.401489,1.585)); +#141825 = LINE('',#141826,#141827); +#141826 = CARTESIAN_POINT('',(96.019032,-114.333178,1.585)); +#141827 = VECTOR('',#141828,1.); +#141828 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#141829 = ORIENTED_EDGE('',*,*,#141830,.T.); +#141830 = EDGE_CURVE('',#141823,#141831,#141833,.T.); +#141831 = VERTEX_POINT('',#141832); +#141832 = CARTESIAN_POINT('',(95.97195,-114.49619,1.585)); +#141833 = CIRCLE('',#141834,7.500003178655E-02); +#141834 = AXIS2_PLACEMENT_3D('',#141835,#141836,#141837); +#141835 = CARTESIAN_POINT('',(96.024982562127,-114.4431565,1.585)); +#141836 = DIRECTION('',(0.,0.,-1.)); +#141837 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#141838 = ORIENTED_EDGE('',*,*,#141839,.T.); +#141839 = EDGE_CURVE('',#141831,#141840,#141842,.T.); +#141840 = VERTEX_POINT('',#141841); +#141841 = CARTESIAN_POINT('',(95.93685,-114.46109,1.585)); +#141842 = LINE('',#141843,#141844); +#141843 = CARTESIAN_POINT('',(95.97195,-114.49619,1.585)); +#141844 = VECTOR('',#141845,1.); +#141845 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#141846 = ORIENTED_EDGE('',*,*,#141847,.T.); +#141847 = EDGE_CURVE('',#141840,#141848,#141850,.T.); +#141848 = VERTEX_POINT('',#141849); +#141849 = CARTESIAN_POINT('',(95.636926,-114.46109,1.585)); +#141850 = CIRCLE('',#141851,0.299308637371); +#141851 = AXIS2_PLACEMENT_3D('',#141852,#141853,#141854); +#141852 = CARTESIAN_POINT('',(95.786888,-114.720121,1.585)); +#141853 = DIRECTION('',(0.,0.,1.)); +#141854 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#141855 = ORIENTED_EDGE('',*,*,#141856,.T.); +#141856 = EDGE_CURVE('',#141848,#141857,#141859,.T.); +#141857 = VERTEX_POINT('',#141858); +#141858 = CARTESIAN_POINT('',(95.562813,-114.535203,1.585)); +#141859 = LINE('',#141860,#141861); +#141860 = CARTESIAN_POINT('',(95.636926,-114.46109,1.585)); +#141861 = VECTOR('',#141862,1.); +#141862 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#141863 = ORIENTED_EDGE('',*,*,#141864,.T.); +#141864 = EDGE_CURVE('',#141857,#141865,#141867,.T.); +#141865 = VERTEX_POINT('',#141866); +#141866 = CARTESIAN_POINT('',(95.480936,-114.910113,1.585)); +#141867 = CIRCLE('',#141868,0.611712714363); +#141868 = AXIS2_PLACEMENT_3D('',#141869,#141870,#141871); +#141869 = CARTESIAN_POINT('',(96.089341275217,-114.8465876822,1.585)); +#141870 = DIRECTION('',(0.,0.,1.)); +#141871 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#141872 = ORIENTED_EDGE('',*,*,#141873,.T.); +#141873 = EDGE_CURVE('',#141865,#141874,#141876,.T.); +#141874 = VERTEX_POINT('',#141875); +#141875 = CARTESIAN_POINT('',(95.524319,-115.083647,1.585)); +#141876 = LINE('',#141877,#141878); +#141877 = CARTESIAN_POINT('',(95.480936,-114.910113,1.585)); +#141878 = VECTOR('',#141879,1.); +#141879 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#141880 = ORIENTED_EDGE('',*,*,#141881,.T.); +#141881 = EDGE_CURVE('',#141874,#141882,#141884,.T.); +#141882 = VERTEX_POINT('',#141883); +#141883 = CARTESIAN_POINT('',(95.562813,-115.160634,1.585)); +#141884 = LINE('',#141885,#141886); +#141885 = CARTESIAN_POINT('',(95.524319,-115.083647,1.585)); +#141886 = VECTOR('',#141887,1.); +#141887 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#141888 = ORIENTED_EDGE('',*,*,#141889,.T.); +#141889 = EDGE_CURVE('',#141882,#141890,#141892,.T.); +#141890 = VERTEX_POINT('',#141891); +#141891 = CARTESIAN_POINT('',(95.636926,-115.234748,1.585)); +#141892 = LINE('',#141893,#141894); +#141893 = CARTESIAN_POINT('',(95.562813,-115.160634,1.585)); +#141894 = VECTOR('',#141895,1.); +#141895 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#141896 = ORIENTED_EDGE('',*,*,#141897,.T.); +#141897 = EDGE_CURVE('',#141890,#141898,#141900,.T.); +#141898 = VERTEX_POINT('',#141899); +#141899 = CARTESIAN_POINT('',(95.93685,-115.234747,1.585)); +#141900 = CIRCLE('',#141901,0.299305962385); +#141901 = AXIS2_PLACEMENT_3D('',#141902,#141903,#141904); +#141902 = CARTESIAN_POINT('',(95.786887136355,-114.9757195909,1.585)); +#141903 = DIRECTION('',(0.,0.,1.)); +#141904 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#141905 = ORIENTED_EDGE('',*,*,#141906,.T.); +#141906 = EDGE_CURVE('',#141898,#141907,#141909,.T.); +#141907 = VERTEX_POINT('',#141908); +#141908 = CARTESIAN_POINT('',(95.983315,-115.19032,1.585)); +#141909 = LINE('',#141910,#141911); +#141910 = CARTESIAN_POINT('',(95.93685,-115.234747,1.585)); +#141911 = VECTOR('',#141912,1.); +#141912 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#141913 = ORIENTED_EDGE('',*,*,#141914,.T.); +#141914 = EDGE_CURVE('',#141907,#141915,#141917,.T.); +#141915 = VERTEX_POINT('',#141916); +#141916 = CARTESIAN_POINT('',(96.078016,-115.305713,1.585)); +#141917 = CIRCLE('',#141918,7.499993690112E-02); +#141918 = AXIS2_PLACEMENT_3D('',#141919,#141920,#141921); +#141919 = CARTESIAN_POINT('',(96.024983248309,-115.2526798237,1.585)); +#141920 = DIRECTION('',(0.,0.,-1.)); +#141921 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#141922 = ORIENTED_EDGE('',*,*,#141923,.T.); +#141923 = EDGE_CURVE('',#141915,#141924,#141926,.T.); +#141924 = VERTEX_POINT('',#141925); +#141925 = CARTESIAN_POINT('',(96.014506,-115.365457,1.585)); +#141926 = LINE('',#141927,#141928); +#141927 = CARTESIAN_POINT('',(96.078016,-115.305713,1.585)); +#141928 = VECTOR('',#141929,1.); +#141929 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#141930 = ORIENTED_EDGE('',*,*,#141931,.T.); +#141931 = EDGE_CURVE('',#141924,#141932,#141934,.T.); +#141932 = VERTEX_POINT('',#141933); +#141933 = CARTESIAN_POINT('',(95.554744,-115.362661,1.585)); +#141934 = CIRCLE('',#141935,0.461067828848); +#141935 = AXIS2_PLACEMENT_3D('',#141936,#141937,#141938); +#141936 = CARTESIAN_POINT('',(95.787055512688,-114.9643961335,1.585)); +#141937 = DIRECTION('',(-0.,0.,-1.)); +#141938 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#141939 = ORIENTED_EDGE('',*,*,#141940,.T.); +#141940 = EDGE_CURVE('',#141932,#141941,#141943,.T.); +#141941 = VERTEX_POINT('',#141942); +#141942 = CARTESIAN_POINT('',(95.438055,-115.244898,1.585)); +#141943 = LINE('',#141944,#141945); +#141944 = CARTESIAN_POINT('',(95.554744,-115.362661,1.585)); +#141945 = VECTOR('',#141946,1.); +#141946 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#141947 = ORIENTED_EDGE('',*,*,#141948,.T.); +#141948 = EDGE_CURVE('',#141941,#141949,#141951,.T.); +#141949 = VERTEX_POINT('',#141950); +#141950 = CARTESIAN_POINT('',(95.380794,-115.128013,1.585)); +#141951 = LINE('',#141952,#141953); +#141952 = CARTESIAN_POINT('',(95.438055,-115.244898,1.585)); +#141953 = VECTOR('',#141954,1.); +#141954 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#141955 = ORIENTED_EDGE('',*,*,#141956,.T.); +#141956 = EDGE_CURVE('',#141949,#141957,#141959,.T.); +#141957 = VERTEX_POINT('',#141958); +#141958 = CARTESIAN_POINT('',(95.330936,-114.919347,1.585)); +#141959 = LINE('',#141960,#141961); +#141960 = CARTESIAN_POINT('',(95.380794,-115.128013,1.585)); +#141961 = VECTOR('',#141962,1.); +#141962 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#141963 = ORIENTED_EDGE('',*,*,#141964,.T.); +#141964 = EDGE_CURVE('',#141957,#141965,#141967,.T.); +#141965 = VERTEX_POINT('',#141966); +#141966 = CARTESIAN_POINT('',(95.333175,-114.7583,1.585)); +#141967 = LINE('',#141968,#141969); +#141968 = CARTESIAN_POINT('',(95.330936,-114.919347,1.585)); +#141969 = VECTOR('',#141970,1.); +#141970 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#141971 = ORIENTED_EDGE('',*,*,#141972,.T.); +#141972 = EDGE_CURVE('',#141965,#141973,#141975,.T.); +#141973 = VERTEX_POINT('',#141974); +#141974 = CARTESIAN_POINT('',(95.386473,-114.552473,1.585)); +#141975 = LINE('',#141976,#141977); +#141976 = CARTESIAN_POINT('',(95.333175,-114.7583,1.585)); +#141977 = VECTOR('',#141978,1.); +#141978 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#141979 = ORIENTED_EDGE('',*,*,#141980,.T.); +#141980 = EDGE_CURVE('',#141973,#141981,#141983,.T.); +#141981 = VERTEX_POINT('',#141982); +#141982 = CARTESIAN_POINT('',(95.443422,-114.443492,1.585)); +#141983 = LINE('',#141984,#141985); +#141984 = CARTESIAN_POINT('',(95.386473,-114.552473,1.585)); +#141985 = VECTOR('',#141986,1.); +#141986 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#141987 = ORIENTED_EDGE('',*,*,#141988,.T.); +#141988 = EDGE_CURVE('',#141981,#141812,#141989,.T.); +#141989 = LINE('',#141990,#141991); +#141990 = CARTESIAN_POINT('',(95.443422,-114.443492,1.585)); +#141991 = VECTOR('',#141992,1.); +#141992 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#141993 = PLANE('',#141994); +#141994 = AXIS2_PLACEMENT_3D('',#141995,#141996,#141997); +#141995 = CARTESIAN_POINT('',(0.,0.,1.585)); +#141996 = DIRECTION('',(0.,0.,1.)); +#141997 = DIRECTION('',(1.,0.,-0.)); +#141998 = SHELL_BASED_SURFACE_MODEL('',(#141999)); +#141999 = OPEN_SHELL('',(#142000)); +#142000 = ADVANCED_FACE('',(#142001),#142062,.T.); +#142001 = FACE_BOUND('',#142002,.F.); +#142002 = EDGE_LOOP('',(#142003,#142014,#142022,#142031,#142039,#142048, + #142056)); +#142003 = ORIENTED_EDGE('',*,*,#142004,.T.); +#142004 = EDGE_CURVE('',#142005,#142007,#142009,.T.); +#142005 = VERTEX_POINT('',#142006); +#142006 = CARTESIAN_POINT('',(96.343685,-114.421478,1.585)); +#142007 = VERTEX_POINT('',#142008); +#142008 = CARTESIAN_POINT('',(96.358317,-114.272919,1.585)); +#142009 = CIRCLE('',#142010,7.500006711464E-02); +#142010 = AXIS2_PLACEMENT_3D('',#142011,#142012,#142013); +#142011 = CARTESIAN_POINT('',(96.358316932885,-114.3479190671,1.585)); +#142012 = DIRECTION('',(0.,0.,-1.)); +#142013 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#142014 = ORIENTED_EDGE('',*,*,#142015,.T.); +#142015 = EDGE_CURVE('',#142007,#142016,#142018,.T.); +#142016 = VERTEX_POINT('',#142017); +#142017 = CARTESIAN_POINT('',(97.039615,-114.27436,1.585)); +#142018 = LINE('',#142019,#142020); +#142019 = CARTESIAN_POINT('',(96.358317,-114.272919,1.585)); +#142020 = VECTOR('',#142021,1.); +#142021 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#142022 = ORIENTED_EDGE('',*,*,#142023,.T.); +#142023 = EDGE_CURVE('',#142016,#142024,#142026,.T.); +#142024 = VERTEX_POINT('',#142025); +#142025 = CARTESIAN_POINT('',(97.093919,-114.377463,1.585)); +#142026 = CIRCLE('',#142027,7.500015546835E-02); +#142027 = AXIS2_PLACEMENT_3D('',#142028,#142029,#142030); +#142028 = CARTESIAN_POINT('',(97.024982974224,-114.3479190044,1.585)); +#142029 = DIRECTION('',(0.,0.,-1.)); +#142030 = DIRECTION('',(0.195093272598,0.980784693491,0.)); +#142031 = ORIENTED_EDGE('',*,*,#142032,.T.); +#142032 = EDGE_CURVE('',#142024,#142033,#142035,.T.); +#142033 = VERTEX_POINT('',#142034); +#142034 = CARTESIAN_POINT('',(96.65826,-115.390344,1.585)); +#142035 = LINE('',#142036,#142037); +#142036 = CARTESIAN_POINT('',(97.093919,-114.377463,1.585)); +#142037 = VECTOR('',#142038,1.); +#142038 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#142039 = ORIENTED_EDGE('',*,*,#142040,.T.); +#142040 = EDGE_CURVE('',#142033,#142041,#142043,.T.); +#142041 = VERTEX_POINT('',#142042); +#142042 = CARTESIAN_POINT('',(96.527476,-115.318375,1.585)); +#142043 = CIRCLE('',#142044,7.500030178421E-02); +#142044 = AXIS2_PLACEMENT_3D('',#142045,#142046,#142047); +#142045 = CARTESIAN_POINT('',(96.596412346983,-115.3479186174,1.585)); +#142046 = DIRECTION('',(-0.,0.,-1.)); +#142047 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#142048 = ORIENTED_EDGE('',*,*,#142049,.T.); +#142049 = EDGE_CURVE('',#142041,#142050,#142052,.T.); +#142050 = VERTEX_POINT('',#142051); +#142051 = CARTESIAN_POINT('',(96.911242,-114.422919,1.585)); +#142052 = LINE('',#142053,#142054); +#142053 = CARTESIAN_POINT('',(96.527476,-115.318375,1.585)); +#142054 = VECTOR('',#142055,1.); +#142055 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#142056 = ORIENTED_EDGE('',*,*,#142057,.T.); +#142057 = EDGE_CURVE('',#142050,#142005,#142058,.T.); +#142058 = LINE('',#142059,#142060); +#142059 = CARTESIAN_POINT('',(96.911242,-114.422919,1.585)); +#142060 = VECTOR('',#142061,1.); +#142061 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#142062 = PLANE('',#142063); +#142063 = AXIS2_PLACEMENT_3D('',#142064,#142065,#142066); +#142064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142065 = DIRECTION('',(0.,0.,1.)); +#142066 = DIRECTION('',(1.,0.,-0.)); +#142067 = SHELL_BASED_SURFACE_MODEL('',(#142068)); +#142068 = OPEN_SHELL('',(#142069)); +#142069 = ADVANCED_FACE('',(#142070),#142265,.T.); +#142070 = FACE_BOUND('',#142071,.F.); +#142071 = EDGE_LOOP('',(#142072,#142083,#142091,#142100,#142108,#142116, + #142124,#142132,#142141,#142149,#142158,#142166,#142174,#142182, + #142191,#142199,#142208,#142216,#142225,#142233,#142242,#142250, + #142259)); +#142072 = ORIENTED_EDGE('',*,*,#142073,.T.); +#142073 = EDGE_CURVE('',#142074,#142076,#142078,.T.); +#142074 = VERTEX_POINT('',#142075); +#142075 = CARTESIAN_POINT('',(92.381817,-114.32604,1.585)); +#142076 = VERTEX_POINT('',#142077); +#142077 = CARTESIAN_POINT('',(92.453555,-114.272919,1.585)); +#142078 = CIRCLE('',#142079,7.500336100769E-02); +#142079 = AXIS2_PLACEMENT_3D('',#142080,#142081,#142082); +#142080 = CARTESIAN_POINT('',(92.453557270704,-114.3479223609,1.585)); +#142081 = DIRECTION('',(0.,0.,-1.)); +#142082 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#142083 = ORIENTED_EDGE('',*,*,#142084,.T.); +#142084 = EDGE_CURVE('',#142076,#142085,#142087,.T.); +#142085 = VERTEX_POINT('',#142086); +#142086 = CARTESIAN_POINT('',(92.944377,-114.27436,1.585)); +#142087 = LINE('',#142088,#142089); +#142088 = CARTESIAN_POINT('',(92.453555,-114.272919,1.585)); +#142089 = VECTOR('',#142090,1.); +#142090 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#142091 = ORIENTED_EDGE('',*,*,#142092,.T.); +#142092 = EDGE_CURVE('',#142085,#142093,#142095,.T.); +#142093 = VERTEX_POINT('',#142094); +#142094 = CARTESIAN_POINT('',(92.929745,-114.422919,1.585)); +#142095 = CIRCLE('',#142096,7.500006711464E-02); +#142096 = AXIS2_PLACEMENT_3D('',#142097,#142098,#142099); +#142097 = CARTESIAN_POINT('',(92.929745067115,-114.3479189328,1.585)); +#142098 = DIRECTION('',(0.,0.,-1.)); +#142099 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#142100 = ORIENTED_EDGE('',*,*,#142101,.T.); +#142101 = EDGE_CURVE('',#142093,#142102,#142104,.T.); +#142102 = VERTEX_POINT('',#142103); +#142103 = CARTESIAN_POINT('',(92.521429,-114.422919,1.585)); +#142104 = LINE('',#142105,#142106); +#142105 = CARTESIAN_POINT('',(92.929745,-114.422919,1.585)); +#142106 = VECTOR('',#142107,1.); +#142107 = DIRECTION('',(-1.,0.,0.)); +#142108 = ORIENTED_EDGE('',*,*,#142109,.T.); +#142109 = EDGE_CURVE('',#142102,#142110,#142112,.T.); +#142110 = VERTEX_POINT('',#142111); +#142111 = CARTESIAN_POINT('',(92.49661,-114.671109,1.585)); +#142112 = LINE('',#142113,#142114); +#142113 = CARTESIAN_POINT('',(92.521429,-114.422919,1.585)); +#142114 = VECTOR('',#142115,1.); +#142115 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#142116 = ORIENTED_EDGE('',*,*,#142117,.T.); +#142117 = EDGE_CURVE('',#142110,#142118,#142120,.T.); +#142118 = VERTEX_POINT('',#142119); +#142119 = CARTESIAN_POINT('',(92.534161,-114.655312,1.585)); +#142120 = LINE('',#142121,#142122); +#142121 = CARTESIAN_POINT('',(92.49661,-114.671109,1.585)); +#142122 = VECTOR('',#142123,1.); +#142123 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#142124 = ORIENTED_EDGE('',*,*,#142125,.T.); +#142125 = EDGE_CURVE('',#142118,#142126,#142128,.T.); +#142126 = VERTEX_POINT('',#142127); +#142127 = CARTESIAN_POINT('',(92.806697,-114.656534,1.585)); +#142128 = LINE('',#142129,#142130); +#142129 = CARTESIAN_POINT('',(92.534161,-114.655312,1.585)); +#142130 = VECTOR('',#142131,1.); +#142131 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#142132 = ORIENTED_EDGE('',*,*,#142133,.T.); +#142133 = EDGE_CURVE('',#142126,#142134,#142136,.T.); +#142134 = VERTEX_POINT('',#142135); +#142135 = CARTESIAN_POINT('',(93.050923,-114.904715,1.585)); +#142136 = CIRCLE('',#142137,0.348625649748); +#142137 = AXIS2_PLACEMENT_3D('',#142138,#142139,#142140); +#142138 = CARTESIAN_POINT('',(92.713525045865,-114.9924786838,1.585)); +#142139 = DIRECTION('',(0.,0.,-1.)); +#142140 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#142141 = ORIENTED_EDGE('',*,*,#142142,.T.); +#142142 = EDGE_CURVE('',#142134,#142143,#142145,.T.); +#142143 = VERTEX_POINT('',#142144); +#142144 = CARTESIAN_POINT('',(93.049701,-115.177252,1.585)); +#142145 = LINE('',#142146,#142147); +#142146 = CARTESIAN_POINT('',(93.050923,-114.904715,1.585)); +#142147 = VECTOR('',#142148,1.); +#142148 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#142149 = ORIENTED_EDGE('',*,*,#142150,.T.); +#142150 = EDGE_CURVE('',#142143,#142151,#142153,.T.); +#142151 = VERTEX_POINT('',#142152); +#142152 = CARTESIAN_POINT('',(92.80152,-115.421478,1.585)); +#142153 = CIRCLE('',#142154,0.348635327447); +#142154 = AXIS2_PLACEMENT_3D('',#142155,#142156,#142157); +#142155 = CARTESIAN_POINT('',(92.713748481291,-115.0840720841,1.585)); +#142156 = DIRECTION('',(0.,0.,-1.)); +#142157 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#142158 = ORIENTED_EDGE('',*,*,#142159,.T.); +#142159 = EDGE_CURVE('',#142151,#142160,#142162,.T.); +#142160 = VERTEX_POINT('',#142161); +#142161 = CARTESIAN_POINT('',(92.528983,-115.420256,1.585)); +#142162 = LINE('',#142163,#142164); +#142163 = CARTESIAN_POINT('',(92.80152,-115.421478,1.585)); +#142164 = VECTOR('',#142165,1.); +#142165 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#142166 = ORIENTED_EDGE('',*,*,#142167,.T.); +#142167 = EDGE_CURVE('',#142160,#142168,#142170,.T.); +#142168 = VERTEX_POINT('',#142169); +#142169 = CARTESIAN_POINT('',(92.40627,-115.35805,1.585)); +#142170 = LINE('',#142171,#142172); +#142171 = CARTESIAN_POINT('',(92.528983,-115.420256,1.585)); +#142172 = VECTOR('',#142173,1.); +#142173 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#142174 = ORIENTED_EDGE('',*,*,#142175,.T.); +#142175 = EDGE_CURVE('',#142168,#142176,#142178,.T.); +#142176 = VERTEX_POINT('',#142177); +#142177 = CARTESIAN_POINT('',(92.343575,-115.294347,1.585)); +#142178 = LINE('',#142179,#142180); +#142179 = CARTESIAN_POINT('',(92.40627,-115.35805,1.585)); +#142180 = VECTOR('',#142181,1.); +#142181 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#142182 = ORIENTED_EDGE('',*,*,#142183,.T.); +#142183 = EDGE_CURVE('',#142176,#142184,#142186,.T.); +#142184 = VERTEX_POINT('',#142185); +#142185 = CARTESIAN_POINT('',(92.45897,-115.199648,1.585)); +#142186 = CIRCLE('',#142187,7.50001266804E-02); +#142187 = AXIS2_PLACEMENT_3D('',#142188,#142189,#142190); +#142188 = CARTESIAN_POINT('',(92.405936051994,-115.2526802483,1.585)); +#142189 = DIRECTION('',(0.,0.,-1.)); +#142190 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#142191 = ORIENTED_EDGE('',*,*,#142192,.T.); +#142192 = EDGE_CURVE('',#142184,#142193,#142195,.T.); +#142193 = VERTEX_POINT('',#142194); +#142194 = CARTESIAN_POINT('',(92.497982,-115.238661,1.585)); +#142195 = LINE('',#142196,#142197); +#142196 = CARTESIAN_POINT('',(92.45897,-115.199648,1.585)); +#142197 = VECTOR('',#142198,1.); +#142198 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#142199 = ORIENTED_EDGE('',*,*,#142200,.T.); +#142200 = EDGE_CURVE('',#142193,#142201,#142203,.T.); +#142201 = VERTEX_POINT('',#142202); +#142202 = CARTESIAN_POINT('',(92.837698,-115.238661,1.585)); +#142203 = CIRCLE('',#142204,0.305620374329); +#142204 = AXIS2_PLACEMENT_3D('',#142205,#142206,#142207); +#142205 = CARTESIAN_POINT('',(92.66784,-114.98459,1.585)); +#142206 = DIRECTION('',(0.,0.,1.)); +#142207 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#142208 = ORIENTED_EDGE('',*,*,#142209,.T.); +#142209 = EDGE_CURVE('',#142201,#142210,#142212,.T.); +#142210 = VERTEX_POINT('',#142211); +#142211 = CARTESIAN_POINT('',(92.868105,-115.208253,1.585)); +#142212 = LINE('',#142213,#142214); +#142213 = CARTESIAN_POINT('',(92.837698,-115.238661,1.585)); +#142214 = VECTOR('',#142215,1.); +#142215 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#142216 = ORIENTED_EDGE('',*,*,#142217,.T.); +#142217 = EDGE_CURVE('',#142210,#142218,#142220,.T.); +#142218 = VERTEX_POINT('',#142219); +#142219 = CARTESIAN_POINT('',(92.868106,-114.868536,1.585)); +#142220 = CIRCLE('',#142221,0.305616146029); +#142221 = AXIS2_PLACEMENT_3D('',#142222,#142223,#142224); +#142222 = CARTESIAN_POINT('',(92.614039920493,-115.0383937521,1.585)); +#142223 = DIRECTION('',(0.,-0.,1.)); +#142224 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#142225 = ORIENTED_EDGE('',*,*,#142226,.T.); +#142226 = EDGE_CURVE('',#142218,#142227,#142229,.T.); +#142227 = VERTEX_POINT('',#142228); +#142228 = CARTESIAN_POINT('',(92.837699,-114.838129,1.585)); +#142229 = LINE('',#142230,#142231); +#142230 = CARTESIAN_POINT('',(92.868106,-114.868536,1.585)); +#142231 = VECTOR('',#142232,1.); +#142232 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#142233 = ORIENTED_EDGE('',*,*,#142234,.T.); +#142234 = EDGE_CURVE('',#142227,#142235,#142237,.T.); +#142235 = VERTEX_POINT('',#142236); +#142236 = CARTESIAN_POINT('',(92.497982,-114.838129,1.585)); +#142237 = CIRCLE('',#142238,0.305621483548); +#142238 = AXIS2_PLACEMENT_3D('',#142239,#142240,#142241); +#142239 = CARTESIAN_POINT('',(92.6678405,-115.092201,1.585)); +#142240 = DIRECTION('',(0.,0.,1.)); +#142241 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#142242 = ORIENTED_EDGE('',*,*,#142243,.T.); +#142243 = EDGE_CURVE('',#142235,#142244,#142246,.T.); +#142244 = VERTEX_POINT('',#142245); +#142245 = CARTESIAN_POINT('',(92.441192,-114.890306,1.585)); +#142246 = LINE('',#142247,#142248); +#142247 = CARTESIAN_POINT('',(92.497982,-114.838129,1.585)); +#142248 = VECTOR('',#142249,1.); +#142249 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#142250 = ORIENTED_EDGE('',*,*,#142251,.T.); +#142251 = EDGE_CURVE('',#142244,#142252,#142254,.T.); +#142252 = VERTEX_POINT('',#142253); +#142253 = CARTESIAN_POINT('',(92.331286,-114.831349,1.585)); +#142254 = CIRCLE('',#142255,7.500024172469E-02); +#142255 = AXIS2_PLACEMENT_3D('',#142256,#142257,#142258); +#142256 = CARTESIAN_POINT('',(92.405935970023,-114.8241089561,1.585)); +#142257 = DIRECTION('',(-0.,0.,-1.)); +#142258 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#142259 = ORIENTED_EDGE('',*,*,#142260,.T.); +#142260 = EDGE_CURVE('',#142252,#142074,#142261,.T.); +#142261 = LINE('',#142262,#142263); +#142262 = CARTESIAN_POINT('',(92.331286,-114.831349,1.585)); +#142263 = VECTOR('',#142264,1.); +#142264 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#142265 = PLANE('',#142266); +#142266 = AXIS2_PLACEMENT_3D('',#142267,#142268,#142269); +#142267 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142268 = DIRECTION('',(0.,0.,1.)); +#142269 = DIRECTION('',(1.,0.,-0.)); +#142270 = SHELL_BASED_SURFACE_MODEL('',(#142271)); +#142271 = OPEN_SHELL('',(#142272)); +#142272 = ADVANCED_FACE('',(#142273),#142417,.T.); +#142273 = FACE_BOUND('',#142274,.F.); +#142274 = EDGE_LOOP('',(#142275,#142286,#142294,#142303,#142311,#142319, + #142328,#142336,#142345,#142353,#142361,#142370,#142378,#142386, + #142395,#142403,#142411)); +#142275 = ORIENTED_EDGE('',*,*,#142276,.T.); +#142276 = EDGE_CURVE('',#142277,#142279,#142281,.T.); +#142277 = VERTEX_POINT('',#142278); +#142278 = CARTESIAN_POINT('',(177.961333,-114.665753,1.585)); +#142279 = VERTEX_POINT('',#142280); +#142280 = CARTESIAN_POINT('',(178.42811,-114.669621,1.585)); +#142281 = CIRCLE('',#142282,0.399448428941); +#142282 = AXIS2_PLACEMENT_3D('',#142283,#142284,#142285); +#142283 = CARTESIAN_POINT('',(178.19203533486,-114.9918442143,1.585)); +#142284 = DIRECTION('',(0.,0.,-1.)); +#142285 = DIRECTION('',(-0.577552239904,0.816353728589,0.)); +#142286 = ORIENTED_EDGE('',*,*,#142287,.T.); +#142287 = EDGE_CURVE('',#142279,#142288,#142290,.T.); +#142288 = VERTEX_POINT('',#142289); +#142289 = CARTESIAN_POINT('',(178.447283,-114.691729,1.585)); +#142290 = LINE('',#142291,#142292); +#142291 = CARTESIAN_POINT('',(178.42811,-114.669621,1.585)); +#142292 = VECTOR('',#142293,1.); +#142293 = DIRECTION('',(0.655178986934,-0.755473689205,0.)); +#142294 = ORIENTED_EDGE('',*,*,#142295,.T.); +#142295 = EDGE_CURVE('',#142288,#142296,#142298,.T.); +#142296 = VERTEX_POINT('',#142297); +#142297 = CARTESIAN_POINT('',(178.348585,-114.795953,1.585)); +#142298 = CIRCLE('',#142299,7.499986582492E-02); +#142299 = AXIS2_PLACEMENT_3D('',#142300,#142301,#142302); +#142300 = CARTESIAN_POINT('',(178.3821258973,-114.7288710495,1.585)); +#142301 = DIRECTION('',(0.,0.,-1.)); +#142302 = DIRECTION('',(0.868762923549,0.495228212713,0.)); +#142303 = ORIENTED_EDGE('',*,*,#142304,.T.); +#142304 = EDGE_CURVE('',#142296,#142305,#142307,.T.); +#142305 = VERTEX_POINT('',#142306); +#142306 = CARTESIAN_POINT('',(178.269183,-114.756252,1.585)); +#142307 = LINE('',#142308,#142309); +#142308 = CARTESIAN_POINT('',(178.348585,-114.795953,1.585)); +#142309 = VECTOR('',#142310,1.); +#142310 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#142311 = ORIENTED_EDGE('',*,*,#142312,.T.); +#142312 = EDGE_CURVE('',#142305,#142313,#142315,.T.); +#142313 = VERTEX_POINT('',#142314); +#142314 = CARTESIAN_POINT('',(178.114117,-114.756252,1.585)); +#142315 = LINE('',#142316,#142317); +#142316 = CARTESIAN_POINT('',(178.269183,-114.756252,1.585)); +#142317 = VECTOR('',#142318,1.); +#142318 = DIRECTION('',(-1.,0.,0.)); +#142319 = ORIENTED_EDGE('',*,*,#142320,.T.); +#142320 = EDGE_CURVE('',#142313,#142321,#142323,.T.); +#142321 = VERTEX_POINT('',#142322); +#142322 = CARTESIAN_POINT('',(177.980936,-114.889433,1.585)); +#142323 = CIRCLE('',#142324,0.18686440374); +#142324 = AXIS2_PLACEMENT_3D('',#142325,#142326,#142327); +#142325 = CARTESIAN_POINT('',(178.161653,-114.936969,1.585)); +#142326 = DIRECTION('',(0.,0.,1.)); +#142327 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#142328 = ORIENTED_EDGE('',*,*,#142329,.T.); +#142329 = EDGE_CURVE('',#142321,#142330,#142332,.T.); +#142330 = VERTEX_POINT('',#142331); +#142331 = CARTESIAN_POINT('',(177.980936,-115.139737,1.585)); +#142332 = LINE('',#142333,#142334); +#142333 = CARTESIAN_POINT('',(177.980936,-114.889433,1.585)); +#142334 = VECTOR('',#142335,1.); +#142335 = DIRECTION('',(0.,-1.,0.)); +#142336 = ORIENTED_EDGE('',*,*,#142337,.T.); +#142337 = EDGE_CURVE('',#142330,#142338,#142340,.T.); +#142338 = VERTEX_POINT('',#142339); +#142339 = CARTESIAN_POINT('',(178.114117,-115.272919,1.585)); +#142340 = CIRCLE('',#142341,0.186867373533); +#142341 = AXIS2_PLACEMENT_3D('',#142342,#142343,#142344); +#142342 = CARTESIAN_POINT('',(178.16165571388,-115.092199643,1.585)); +#142343 = DIRECTION('',(0.,0.,1.)); +#142344 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#142345 = ORIENTED_EDGE('',*,*,#142346,.T.); +#142346 = EDGE_CURVE('',#142338,#142347,#142349,.T.); +#142347 = VERTEX_POINT('',#142348); +#142348 = CARTESIAN_POINT('',(178.269183,-115.272919,1.585)); +#142349 = LINE('',#142350,#142351); +#142350 = CARTESIAN_POINT('',(178.114117,-115.272919,1.585)); +#142351 = VECTOR('',#142352,1.); +#142352 = DIRECTION('',(1.,0.,0.)); +#142353 = ORIENTED_EDGE('',*,*,#142354,.T.); +#142354 = EDGE_CURVE('',#142347,#142355,#142357,.T.); +#142355 = VERTEX_POINT('',#142356); +#142356 = CARTESIAN_POINT('',(178.362316,-115.227963,1.585)); +#142357 = LINE('',#142358,#142359); +#142358 = CARTESIAN_POINT('',(178.269183,-115.272919,1.585)); +#142359 = VECTOR('',#142360,1.); +#142360 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#142361 = ORIENTED_EDGE('',*,*,#142362,.T.); +#142362 = EDGE_CURVE('',#142355,#142363,#142365,.T.); +#142363 = VERTEX_POINT('',#142364); +#142364 = CARTESIAN_POINT('',(178.415667,-115.367382,1.585)); +#142365 = CIRCLE('',#142366,7.50002944047E-02); +#142366 = AXIS2_PLACEMENT_3D('',#142367,#142368,#142369); +#142367 = CARTESIAN_POINT('',(178.38212535132,-115.300299946,1.585)); +#142368 = DIRECTION('',(0.,0.,-1.)); +#142369 = DIRECTION('',(-0.264123647521,0.964488827732,-0.)); +#142370 = ORIENTED_EDGE('',*,*,#142371,.T.); +#142371 = EDGE_CURVE('',#142363,#142372,#142374,.T.); +#142372 = VERTEX_POINT('',#142373); +#142373 = CARTESIAN_POINT('',(178.30152,-115.421478,1.585)); +#142374 = LINE('',#142375,#142376); +#142375 = CARTESIAN_POINT('',(178.415667,-115.367382,1.585)); +#142376 = VECTOR('',#142377,1.); +#142377 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#142378 = ORIENTED_EDGE('',*,*,#142379,.T.); +#142379 = EDGE_CURVE('',#142372,#142380,#142382,.T.); +#142380 = VERTEX_POINT('',#142381); +#142381 = CARTESIAN_POINT('',(178.076602,-115.420256,1.585)); +#142382 = LINE('',#142383,#142384); +#142383 = CARTESIAN_POINT('',(178.30152,-115.421478,1.585)); +#142384 = VECTOR('',#142385,1.); +#142385 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#142386 = ORIENTED_EDGE('',*,*,#142387,.T.); +#142387 = EDGE_CURVE('',#142380,#142388,#142390,.T.); +#142388 = VERTEX_POINT('',#142389); +#142389 = CARTESIAN_POINT('',(177.832377,-115.172074,1.585)); +#142390 = CIRCLE('',#142391,0.348628446661); +#142391 = AXIS2_PLACEMENT_3D('',#142392,#142393,#142394); +#142392 = CARTESIAN_POINT('',(178.16977761322,-115.0843094284,1.585)); +#142393 = DIRECTION('',(0.,0.,-1.)); +#142394 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#142395 = ORIENTED_EDGE('',*,*,#142396,.T.); +#142396 = EDGE_CURVE('',#142388,#142397,#142399,.T.); +#142397 = VERTEX_POINT('',#142398); +#142398 = CARTESIAN_POINT('',(177.833599,-114.851919,1.585)); +#142399 = LINE('',#142400,#142401); +#142400 = CARTESIAN_POINT('',(177.832377,-115.172074,1.585)); +#142401 = VECTOR('',#142402,1.); +#142402 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#142403 = ORIENTED_EDGE('',*,*,#142404,.T.); +#142404 = EDGE_CURVE('',#142397,#142405,#142407,.T.); +#142405 = VERTEX_POINT('',#142406); +#142406 = CARTESIAN_POINT('',(177.895803,-114.729206,1.585)); +#142407 = LINE('',#142408,#142409); +#142408 = CARTESIAN_POINT('',(177.833599,-114.851919,1.585)); +#142409 = VECTOR('',#142410,1.); +#142410 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#142411 = ORIENTED_EDGE('',*,*,#142412,.T.); +#142412 = EDGE_CURVE('',#142405,#142277,#142413,.T.); +#142413 = LINE('',#142414,#142415); +#142414 = CARTESIAN_POINT('',(177.895803,-114.729206,1.585)); +#142415 = VECTOR('',#142416,1.); +#142416 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#142417 = PLANE('',#142418); +#142418 = AXIS2_PLACEMENT_3D('',#142419,#142420,#142421); +#142419 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142420 = DIRECTION('',(0.,0.,1.)); +#142421 = DIRECTION('',(1.,0.,-0.)); +#142422 = SHELL_BASED_SURFACE_MODEL('',(#142423)); +#142423 = OPEN_SHELL('',(#142424)); +#142424 = ADVANCED_FACE('',(#142425,#142502),#142579,.T.); +#142425 = FACE_BOUND('',#142426,.F.); +#142426 = EDGE_LOOP('',(#142427,#142438,#142446,#142454,#142463,#142471, + #142480,#142488,#142496)); +#142427 = ORIENTED_EDGE('',*,*,#142428,.T.); +#142428 = EDGE_CURVE('',#142429,#142431,#142433,.T.); +#142429 = VERTEX_POINT('',#142430); +#142430 = CARTESIAN_POINT('',(178.818476,-114.665753,1.585)); +#142431 = VERTEX_POINT('',#142432); +#142432 = CARTESIAN_POINT('',(179.302386,-114.736649,1.585)); +#142433 = CIRCLE('',#142434,0.34461174713); +#142434 = AXIS2_PLACEMENT_3D('',#142435,#142436,#142437); +#142435 = CARTESIAN_POINT('',(179.02523294377,-114.9414499757,1.585)); +#142436 = DIRECTION('',(0.,0.,-1.)); +#142437 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#142438 = ORIENTED_EDGE('',*,*,#142439,.T.); +#142439 = EDGE_CURVE('',#142431,#142440,#142442,.T.); +#142440 = VERTEX_POINT('',#142441); +#142441 = CARTESIAN_POINT('',(179.360447,-114.857096,1.585)); +#142442 = LINE('',#142443,#142444); +#142443 = CARTESIAN_POINT('',(179.302386,-114.736649,1.585)); +#142444 = VECTOR('',#142445,1.); +#142445 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#142446 = ORIENTED_EDGE('',*,*,#142447,.T.); +#142447 = EDGE_CURVE('',#142440,#142448,#142450,.T.); +#142448 = VERTEX_POINT('',#142449); +#142449 = CARTESIAN_POINT('',(179.359225,-115.177252,1.585)); +#142450 = LINE('',#142451,#142452); +#142451 = CARTESIAN_POINT('',(179.360447,-114.857096,1.585)); +#142452 = VECTOR('',#142453,1.); +#142453 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#142454 = ORIENTED_EDGE('',*,*,#142455,.T.); +#142455 = EDGE_CURVE('',#142448,#142456,#142458,.T.); +#142456 = VERTEX_POINT('',#142457); +#142457 = CARTESIAN_POINT('',(179.111044,-115.421478,1.585)); +#142458 = CIRCLE('',#142459,0.348635327447); +#142459 = AXIS2_PLACEMENT_3D('',#142460,#142461,#142462); +#142460 = CARTESIAN_POINT('',(179.02327248129,-115.0840720841,1.585)); +#142461 = DIRECTION('',(0.,0.,-1.)); +#142462 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#142463 = ORIENTED_EDGE('',*,*,#142464,.T.); +#142464 = EDGE_CURVE('',#142456,#142465,#142467,.T.); +#142465 = VERTEX_POINT('',#142466); +#142466 = CARTESIAN_POINT('',(178.933745,-115.420256,1.585)); +#142467 = LINE('',#142468,#142469); +#142468 = CARTESIAN_POINT('',(179.111044,-115.421478,1.585)); +#142469 = VECTOR('',#142470,1.); +#142470 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#142471 = ORIENTED_EDGE('',*,*,#142472,.T.); +#142472 = EDGE_CURVE('',#142465,#142473,#142475,.T.); +#142473 = VERTEX_POINT('',#142474); +#142474 = CARTESIAN_POINT('',(178.68952,-115.172074,1.585)); +#142475 = CIRCLE('',#142476,0.348628446662); +#142476 = AXIS2_PLACEMENT_3D('',#142477,#142478,#142479); +#142477 = CARTESIAN_POINT('',(179.02692061322,-115.0843094284,1.585)); +#142478 = DIRECTION('',(0.,0.,-1.)); +#142479 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#142480 = ORIENTED_EDGE('',*,*,#142481,.T.); +#142481 = EDGE_CURVE('',#142473,#142482,#142484,.T.); +#142482 = VERTEX_POINT('',#142483); +#142483 = CARTESIAN_POINT('',(178.690742,-114.851919,1.585)); +#142484 = LINE('',#142485,#142486); +#142485 = CARTESIAN_POINT('',(178.68952,-115.172074,1.585)); +#142486 = VECTOR('',#142487,1.); +#142487 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#142488 = ORIENTED_EDGE('',*,*,#142489,.T.); +#142489 = EDGE_CURVE('',#142482,#142490,#142492,.T.); +#142490 = VERTEX_POINT('',#142491); +#142491 = CARTESIAN_POINT('',(178.752946,-114.729206,1.585)); +#142492 = LINE('',#142493,#142494); +#142493 = CARTESIAN_POINT('',(178.690742,-114.851919,1.585)); +#142494 = VECTOR('',#142495,1.); +#142495 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#142496 = ORIENTED_EDGE('',*,*,#142497,.T.); +#142497 = EDGE_CURVE('',#142490,#142429,#142498,.T.); +#142498 = LINE('',#142499,#142500); +#142499 = CARTESIAN_POINT('',(178.752946,-114.729206,1.585)); +#142500 = VECTOR('',#142501,1.); +#142501 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#142502 = FACE_BOUND('',#142503,.F.); +#142503 = EDGE_LOOP('',(#142504,#142515,#142523,#142531,#142540,#142548, + #142557,#142565,#142573)); +#142504 = ORIENTED_EDGE('',*,*,#142505,.T.); +#142505 = EDGE_CURVE('',#142506,#142508,#142510,.T.); +#142506 = VERTEX_POINT('',#142507); +#142507 = CARTESIAN_POINT('',(179.147223,-114.79051,1.585)); +#142508 = VERTEX_POINT('',#142509); +#142509 = CARTESIAN_POINT('',(178.872337,-114.820917,1.585)); +#142510 = CIRCLE('',#142511,0.198386215365); +#142511 = AXIS2_PLACEMENT_3D('',#142512,#142513,#142514); +#142512 = CARTESIAN_POINT('',(179.02541995783,-114.9471021753,1.585)); +#142513 = DIRECTION('',(0.,0.,1.)); +#142514 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#142515 = ORIENTED_EDGE('',*,*,#142516,.T.); +#142516 = EDGE_CURVE('',#142508,#142517,#142519,.T.); +#142517 = VERTEX_POINT('',#142518); +#142518 = CARTESIAN_POINT('',(178.838079,-114.889433,1.585)); +#142519 = LINE('',#142520,#142521); +#142520 = CARTESIAN_POINT('',(178.872337,-114.820917,1.585)); +#142521 = VECTOR('',#142522,1.); +#142522 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#142523 = ORIENTED_EDGE('',*,*,#142524,.T.); +#142524 = EDGE_CURVE('',#142517,#142525,#142527,.T.); +#142525 = VERTEX_POINT('',#142526); +#142526 = CARTESIAN_POINT('',(178.838079,-115.139737,1.585)); +#142527 = LINE('',#142528,#142529); +#142528 = CARTESIAN_POINT('',(178.838079,-114.889433,1.585)); +#142529 = VECTOR('',#142530,1.); +#142530 = DIRECTION('',(0.,-1.,0.)); +#142531 = ORIENTED_EDGE('',*,*,#142532,.T.); +#142532 = EDGE_CURVE('',#142525,#142533,#142535,.T.); +#142533 = VERTEX_POINT('',#142534); +#142534 = CARTESIAN_POINT('',(178.97126,-115.272919,1.585)); +#142535 = CIRCLE('',#142536,0.186867373533); +#142536 = AXIS2_PLACEMENT_3D('',#142537,#142538,#142539); +#142537 = CARTESIAN_POINT('',(179.01879871388,-115.092199643,1.585)); +#142538 = DIRECTION('',(0.,0.,1.)); +#142539 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#142540 = ORIENTED_EDGE('',*,*,#142541,.T.); +#142541 = EDGE_CURVE('',#142533,#142542,#142544,.T.); +#142542 = VERTEX_POINT('',#142543); +#142543 = CARTESIAN_POINT('',(179.078707,-115.272919,1.585)); +#142544 = LINE('',#142545,#142546); +#142545 = CARTESIAN_POINT('',(178.97126,-115.272919,1.585)); +#142546 = VECTOR('',#142547,1.); +#142547 = DIRECTION('',(1.,0.,0.)); +#142548 = ORIENTED_EDGE('',*,*,#142549,.T.); +#142549 = EDGE_CURVE('',#142542,#142550,#142552,.T.); +#142550 = VERTEX_POINT('',#142551); +#142551 = CARTESIAN_POINT('',(179.211888,-115.139737,1.585)); +#142552 = CIRCLE('',#142553,0.186867760544); +#142553 = AXIS2_PLACEMENT_3D('',#142554,#142555,#142556); +#142554 = CARTESIAN_POINT('',(179.03116796928,-115.0921993262,1.585)); +#142555 = DIRECTION('',(0.,0.,1.)); +#142556 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#142557 = ORIENTED_EDGE('',*,*,#142558,.T.); +#142558 = EDGE_CURVE('',#142550,#142559,#142561,.T.); +#142559 = VERTEX_POINT('',#142560); +#142560 = CARTESIAN_POINT('',(179.211888,-114.889433,1.585)); +#142561 = LINE('',#142562,#142563); +#142562 = CARTESIAN_POINT('',(179.211888,-115.139737,1.585)); +#142563 = VECTOR('',#142564,1.); +#142564 = DIRECTION('',(0.,1.,0.)); +#142565 = ORIENTED_EDGE('',*,*,#142566,.T.); +#142566 = EDGE_CURVE('',#142559,#142567,#142569,.T.); +#142567 = VERTEX_POINT('',#142568); +#142568 = CARTESIAN_POINT('',(179.17763,-114.820917,1.585)); +#142569 = LINE('',#142570,#142571); +#142570 = CARTESIAN_POINT('',(179.211888,-114.889433,1.585)); +#142571 = VECTOR('',#142572,1.); +#142572 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#142573 = ORIENTED_EDGE('',*,*,#142574,.T.); +#142574 = EDGE_CURVE('',#142567,#142506,#142575,.T.); +#142575 = LINE('',#142576,#142577); +#142576 = CARTESIAN_POINT('',(179.17763,-114.820917,1.585)); +#142577 = VECTOR('',#142578,1.); +#142578 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#142579 = PLANE('',#142580); +#142580 = AXIS2_PLACEMENT_3D('',#142581,#142582,#142583); +#142581 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142582 = DIRECTION('',(0.,0.,1.)); +#142583 = DIRECTION('',(1.,0.,-0.)); +#142584 = SHELL_BASED_SURFACE_MODEL('',(#142585)); +#142585 = OPEN_SHELL('',(#142586)); +#142586 = ADVANCED_FACE('',(#142587),#142804,.T.); +#142587 = FACE_BOUND('',#142588,.F.); +#142588 = EDGE_LOOP('',(#142589,#142600,#142608,#142616,#142624,#142633, + #142641,#142650,#142658,#142667,#142675,#142683,#142692,#142700, + #142708,#142717,#142725,#142733,#142741,#142749,#142757,#142765, + #142773,#142782,#142790,#142798)); +#142589 = ORIENTED_EDGE('',*,*,#142590,.T.); +#142590 = EDGE_CURVE('',#142591,#142593,#142595,.T.); +#142591 = VERTEX_POINT('',#142592); +#142592 = CARTESIAN_POINT('',(179.673792,-114.618892,1.585)); +#142593 = VERTEX_POINT('',#142594); +#142594 = CARTESIAN_POINT('',(179.776529,-114.638293,1.585)); +#142595 = CIRCLE('',#142596,7.440760172328E-02); +#142596 = AXIS2_PLACEMENT_3D('',#142597,#142598,#142599); +#142597 = CARTESIAN_POINT('',(179.71533506572,-114.680622583,1.585)); +#142598 = DIRECTION('',(0.,0.,-1.)); +#142599 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#142600 = ORIENTED_EDGE('',*,*,#142601,.T.); +#142601 = EDGE_CURVE('',#142593,#142602,#142604,.T.); +#142602 = VERTEX_POINT('',#142603); +#142603 = CARTESIAN_POINT('',(179.843685,-114.607693,1.585)); +#142604 = LINE('',#142605,#142606); +#142605 = CARTESIAN_POINT('',(179.776529,-114.638293,1.585)); +#142606 = VECTOR('',#142607,1.); +#142607 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#142608 = ORIENTED_EDGE('',*,*,#142609,.T.); +#142609 = EDGE_CURVE('',#142602,#142610,#142612,.T.); +#142610 = VERTEX_POINT('',#142611); +#142611 = CARTESIAN_POINT('',(180.015806,-114.607693,1.585)); +#142612 = LINE('',#142613,#142614); +#142613 = CARTESIAN_POINT('',(179.843685,-114.607693,1.585)); +#142614 = VECTOR('',#142615,1.); +#142615 = DIRECTION('',(1.,0.,0.)); +#142616 = ORIENTED_EDGE('',*,*,#142617,.T.); +#142617 = EDGE_CURVE('',#142610,#142618,#142620,.T.); +#142618 = VERTEX_POINT('',#142619); +#142619 = CARTESIAN_POINT('',(180.145666,-114.669621,1.585)); +#142620 = LINE('',#142621,#142622); +#142621 = CARTESIAN_POINT('',(180.015806,-114.607693,1.585)); +#142622 = VECTOR('',#142623,1.); +#142623 = DIRECTION('',(0.902617807283,-0.430442904431,0.)); +#142624 = ORIENTED_EDGE('',*,*,#142625,.T.); +#142625 = EDGE_CURVE('',#142618,#142626,#142628,.T.); +#142626 = VERTEX_POINT('',#142627); +#142627 = CARTESIAN_POINT('',(180.570967,-114.669621,1.585)); +#142628 = CIRCLE('',#142629,0.347106732746); +#142629 = AXIS2_PLACEMENT_3D('',#142630,#142631,#142632); +#142630 = CARTESIAN_POINT('',(180.3583165,-114.943961753,1.585)); +#142631 = DIRECTION('',(0.,0.,-1.)); +#142632 = DIRECTION('',(-0.612637209073,0.790364251506,0.)); +#142633 = ORIENTED_EDGE('',*,*,#142634,.T.); +#142634 = EDGE_CURVE('',#142626,#142635,#142637,.T.); +#142635 = VERTEX_POINT('',#142636); +#142636 = CARTESIAN_POINT('',(180.592066,-114.69533,1.585)); +#142637 = LINE('',#142638,#142639); +#142638 = CARTESIAN_POINT('',(180.570967,-114.669621,1.585)); +#142639 = VECTOR('',#142640,1.); +#142640 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#142641 = ORIENTED_EDGE('',*,*,#142642,.T.); +#142642 = EDGE_CURVE('',#142635,#142643,#142645,.T.); +#142643 = VERTEX_POINT('',#142644); +#142644 = CARTESIAN_POINT('',(180.634963,-115.389587,1.585)); +#142645 = CIRCLE('',#142646,0.780466291444); +#142646 = AXIS2_PLACEMENT_3D('',#142647,#142648,#142649); +#142647 = CARTESIAN_POINT('',(179.9161532213,-115.0855473082,1.585)); +#142648 = DIRECTION('',(0.,0.,-1.)); +#142649 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#142650 = ORIENTED_EDGE('',*,*,#142651,.T.); +#142651 = EDGE_CURVE('',#142643,#142652,#142654,.T.); +#142652 = VERTEX_POINT('',#142653); +#142653 = CARTESIAN_POINT('',(180.614271,-115.410279,1.585)); +#142654 = LINE('',#142655,#142656); +#142655 = CARTESIAN_POINT('',(180.634963,-115.389587,1.585)); +#142656 = VECTOR('',#142657,1.); +#142657 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#142658 = ORIENTED_EDGE('',*,*,#142659,.T.); +#142659 = EDGE_CURVE('',#142652,#142660,#142662,.T.); +#142660 = VERTEX_POINT('',#142661); +#142661 = CARTESIAN_POINT('',(180.497603,-115.347919,1.585)); +#142662 = CIRCLE('',#142663,7.499979580331E-02); +#142663 = AXIS2_PLACEMENT_3D('',#142664,#142665,#142666); +#142664 = CARTESIAN_POINT('',(180.5726027958,-115.3479193164,1.585)); +#142665 = DIRECTION('',(-0.,0.,-1.)); +#142666 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#142667 = ORIENTED_EDGE('',*,*,#142668,.T.); +#142668 = EDGE_CURVE('',#142660,#142669,#142671,.T.); +#142669 = VERTEX_POINT('',#142670); +#142670 = CARTESIAN_POINT('',(180.497603,-114.841814,1.585)); +#142671 = LINE('',#142672,#142673); +#142672 = CARTESIAN_POINT('',(180.497603,-115.347919,1.585)); +#142673 = VECTOR('',#142674,1.); +#142674 = DIRECTION('',(0.,1.,0.)); +#142675 = ORIENTED_EDGE('',*,*,#142676,.T.); +#142676 = EDGE_CURVE('',#142669,#142677,#142679,.T.); +#142677 = VERTEX_POINT('',#142678); +#142678 = CARTESIAN_POINT('',(180.469082,-114.784772,1.585)); +#142679 = LINE('',#142680,#142681); +#142680 = CARTESIAN_POINT('',(180.497603,-114.841814,1.585)); +#142681 = VECTOR('',#142682,1.); +#142682 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#142683 = ORIENTED_EDGE('',*,*,#142684,.T.); +#142684 = EDGE_CURVE('',#142677,#142685,#142687,.T.); +#142685 = VERTEX_POINT('',#142686); +#142686 = CARTESIAN_POINT('',(180.247551,-114.784772,1.585)); +#142687 = CIRCLE('',#142688,0.186653372204); +#142688 = AXIS2_PLACEMENT_3D('',#142689,#142690,#142691); +#142689 = CARTESIAN_POINT('',(180.3583165,-114.9350067674,1.585)); +#142690 = DIRECTION('',(0.,0.,1.)); +#142691 = DIRECTION('',(0.593428871348,0.804886435872,-0.)); +#142692 = ORIENTED_EDGE('',*,*,#142693,.T.); +#142693 = EDGE_CURVE('',#142685,#142694,#142696,.T.); +#142694 = VERTEX_POINT('',#142695); +#142695 = CARTESIAN_POINT('',(180.219031,-114.841814,1.585)); +#142696 = LINE('',#142697,#142698); +#142697 = CARTESIAN_POINT('',(180.247551,-114.784772,1.585)); +#142698 = VECTOR('',#142699,1.); +#142699 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#142700 = ORIENTED_EDGE('',*,*,#142701,.T.); +#142701 = EDGE_CURVE('',#142694,#142702,#142704,.T.); +#142702 = VERTEX_POINT('',#142703); +#142703 = CARTESIAN_POINT('',(180.21759,-115.362551,1.585)); +#142704 = LINE('',#142705,#142706); +#142705 = CARTESIAN_POINT('',(180.219031,-114.841814,1.585)); +#142706 = VECTOR('',#142707,1.); +#142707 = DIRECTION('',(-2.767221232121E-03,-0.999996171236,0.)); +#142708 = ORIENTED_EDGE('',*,*,#142709,.T.); +#142709 = EDGE_CURVE('',#142702,#142710,#142712,.T.); +#142710 = VERTEX_POINT('',#142711); +#142711 = CARTESIAN_POINT('',(180.069031,-115.347919,1.585)); +#142712 = CIRCLE('',#142713,7.500006711464E-02); +#142713 = AXIS2_PLACEMENT_3D('',#142714,#142715,#142716); +#142714 = CARTESIAN_POINT('',(180.14403106711,-115.3479190671,1.585)); +#142715 = DIRECTION('',(-0.,0.,-1.)); +#142716 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#142717 = ORIENTED_EDGE('',*,*,#142718,.T.); +#142718 = EDGE_CURVE('',#142710,#142719,#142721,.T.); +#142719 = VERTEX_POINT('',#142720); +#142720 = CARTESIAN_POINT('',(180.069031,-114.841814,1.585)); +#142721 = LINE('',#142722,#142723); +#142722 = CARTESIAN_POINT('',(180.069031,-115.347919,1.585)); +#142723 = VECTOR('',#142724,1.); +#142724 = DIRECTION('',(0.,1.,0.)); +#142725 = ORIENTED_EDGE('',*,*,#142726,.T.); +#142726 = EDGE_CURVE('',#142719,#142727,#142729,.T.); +#142727 = VERTEX_POINT('',#142728); +#142728 = CARTESIAN_POINT('',(180.04051,-114.784772,1.585)); +#142729 = LINE('',#142730,#142731); +#142730 = CARTESIAN_POINT('',(180.069031,-114.841814,1.585)); +#142731 = VECTOR('',#142732,1.); +#142732 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#142733 = ORIENTED_EDGE('',*,*,#142734,.T.); +#142734 = EDGE_CURVE('',#142727,#142735,#142737,.T.); +#142735 = VERTEX_POINT('',#142736); +#142736 = CARTESIAN_POINT('',(179.983469,-114.756252,1.585)); +#142737 = LINE('',#142738,#142739); +#142738 = CARTESIAN_POINT('',(180.04051,-114.784772,1.585)); +#142739 = VECTOR('',#142740,1.); +#142740 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#142741 = ORIENTED_EDGE('',*,*,#142742,.T.); +#142742 = EDGE_CURVE('',#142735,#142743,#142745,.T.); +#142743 = VERTEX_POINT('',#142744); +#142744 = CARTESIAN_POINT('',(179.876022,-114.756252,1.585)); +#142745 = LINE('',#142746,#142747); +#142746 = CARTESIAN_POINT('',(179.983469,-114.756252,1.585)); +#142747 = VECTOR('',#142748,1.); +#142748 = DIRECTION('',(-1.,0.,0.)); +#142749 = ORIENTED_EDGE('',*,*,#142750,.T.); +#142750 = EDGE_CURVE('',#142743,#142751,#142753,.T.); +#142751 = VERTEX_POINT('',#142752); +#142752 = CARTESIAN_POINT('',(179.807506,-114.79051,1.585)); +#142753 = LINE('',#142754,#142755); +#142754 = CARTESIAN_POINT('',(179.876022,-114.756252,1.585)); +#142755 = VECTOR('',#142756,1.); +#142756 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#142757 = ORIENTED_EDGE('',*,*,#142758,.T.); +#142758 = EDGE_CURVE('',#142751,#142759,#142761,.T.); +#142759 = VERTEX_POINT('',#142760); +#142760 = CARTESIAN_POINT('',(179.79046,-114.807556,1.585)); +#142761 = LINE('',#142762,#142763); +#142762 = CARTESIAN_POINT('',(179.807506,-114.79051,1.585)); +#142763 = VECTOR('',#142764,1.); +#142764 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#142765 = ORIENTED_EDGE('',*,*,#142766,.T.); +#142766 = EDGE_CURVE('',#142759,#142767,#142769,.T.); +#142767 = VERTEX_POINT('',#142768); +#142768 = CARTESIAN_POINT('',(179.789019,-115.362551,1.585)); +#142769 = LINE('',#142770,#142771); +#142770 = CARTESIAN_POINT('',(179.79046,-114.807556,1.585)); +#142771 = VECTOR('',#142772,1.); +#142772 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#142773 = ORIENTED_EDGE('',*,*,#142774,.T.); +#142774 = EDGE_CURVE('',#142767,#142775,#142777,.T.); +#142775 = VERTEX_POINT('',#142776); +#142776 = CARTESIAN_POINT('',(179.64046,-115.347919,1.585)); +#142777 = CIRCLE('',#142778,7.500006711465E-02); +#142778 = AXIS2_PLACEMENT_3D('',#142779,#142780,#142781); +#142779 = CARTESIAN_POINT('',(179.71546006711,-115.3479190671,1.585)); +#142780 = DIRECTION('',(-0.,0.,-1.)); +#142781 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#142782 = ORIENTED_EDGE('',*,*,#142783,.T.); +#142783 = EDGE_CURVE('',#142775,#142784,#142786,.T.); +#142784 = VERTEX_POINT('',#142785); +#142785 = CARTESIAN_POINT('',(179.641901,-114.66662,1.585)); +#142786 = LINE('',#142787,#142788); +#142787 = CARTESIAN_POINT('',(179.64046,-115.347919,1.585)); +#142788 = VECTOR('',#142789,1.); +#142789 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#142790 = ORIENTED_EDGE('',*,*,#142791,.T.); +#142791 = EDGE_CURVE('',#142784,#142792,#142794,.T.); +#142792 = VERTEX_POINT('',#142793); +#142793 = CARTESIAN_POINT('',(179.6531,-114.639584,1.585)); +#142794 = LINE('',#142795,#142796); +#142795 = CARTESIAN_POINT('',(179.641901,-114.66662,1.585)); +#142796 = VECTOR('',#142797,1.); +#142797 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#142798 = ORIENTED_EDGE('',*,*,#142799,.T.); +#142799 = EDGE_CURVE('',#142792,#142591,#142800,.T.); +#142800 = LINE('',#142801,#142802); +#142801 = CARTESIAN_POINT('',(179.6531,-114.639584,1.585)); +#142802 = VECTOR('',#142803,1.); +#142803 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#142804 = PLANE('',#142805); +#142805 = AXIS2_PLACEMENT_3D('',#142806,#142807,#142808); +#142806 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142807 = DIRECTION('',(0.,0.,1.)); +#142808 = DIRECTION('',(1.,0.,-0.)); +#142809 = SHELL_BASED_SURFACE_MODEL('',(#142810)); +#142810 = OPEN_SHELL('',(#142811)); +#142811 = ADVANCED_FACE('',(#142812),#142848,.T.); +#142812 = FACE_BOUND('',#142813,.F.); +#142813 = EDGE_LOOP('',(#142814,#142825,#142833,#142842)); +#142814 = ORIENTED_EDGE('',*,*,#142815,.T.); +#142815 = EDGE_CURVE('',#142816,#142818,#142820,.T.); +#142816 = VERTEX_POINT('',#142817); +#142817 = CARTESIAN_POINT('',(187.82607,-115.3931,1.585)); +#142818 = VERTEX_POINT('',#142819); +#142819 = CARTESIAN_POINT('',(187.82607,-115.2731,1.585)); +#142820 = CIRCLE('',#142821,6.000000000043E-02); +#142821 = AXIS2_PLACEMENT_3D('',#142822,#142823,#142824); +#142822 = CARTESIAN_POINT('',(187.82606977441,-115.3331,1.585)); +#142823 = DIRECTION('',(0.,0.,-1.)); +#142824 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#142825 = ORIENTED_EDGE('',*,*,#142826,.T.); +#142826 = EDGE_CURVE('',#142818,#142827,#142829,.T.); +#142827 = VERTEX_POINT('',#142828); +#142828 = CARTESIAN_POINT('',(188.10723,-115.2731,1.585)); +#142829 = LINE('',#142830,#142831); +#142830 = CARTESIAN_POINT('',(187.82607,-115.2731,1.585)); +#142831 = VECTOR('',#142832,1.); +#142832 = DIRECTION('',(1.,0.,0.)); +#142833 = ORIENTED_EDGE('',*,*,#142834,.T.); +#142834 = EDGE_CURVE('',#142827,#142835,#142837,.T.); +#142835 = VERTEX_POINT('',#142836); +#142836 = CARTESIAN_POINT('',(188.10723,-115.3931,1.585)); +#142837 = CIRCLE('',#142838,6.000000000042E-02); +#142838 = AXIS2_PLACEMENT_3D('',#142839,#142840,#142841); +#142839 = CARTESIAN_POINT('',(188.10723022558,-115.3331,1.585)); +#142840 = DIRECTION('',(0.,0.,-1.)); +#142841 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#142842 = ORIENTED_EDGE('',*,*,#142843,.T.); +#142843 = EDGE_CURVE('',#142835,#142816,#142844,.T.); +#142844 = LINE('',#142845,#142846); +#142845 = CARTESIAN_POINT('',(188.10723,-115.3931,1.585)); +#142846 = VECTOR('',#142847,1.); +#142847 = DIRECTION('',(-1.,0.,0.)); +#142848 = PLANE('',#142849); +#142849 = AXIS2_PLACEMENT_3D('',#142850,#142851,#142852); +#142850 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142851 = DIRECTION('',(0.,0.,1.)); +#142852 = DIRECTION('',(1.,0.,-0.)); +#142853 = SHELL_BASED_SURFACE_MODEL('',(#142854)); +#142854 = OPEN_SHELL('',(#142855)); +#142855 = ADVANCED_FACE('',(#142856),#142950,.T.); +#142856 = FACE_BOUND('',#142857,.F.); +#142857 = EDGE_LOOP('',(#142858,#142869,#142877,#142885,#142893,#142902, + #142910,#142919,#142927,#142936,#142944)); +#142858 = ORIENTED_EDGE('',*,*,#142859,.T.); +#142859 = EDGE_CURVE('',#142860,#142862,#142864,.T.); +#142860 = VERTEX_POINT('',#142861); +#142861 = CARTESIAN_POINT('',(195.506217,-115.015139,1.585)); +#142862 = VERTEX_POINT('',#142863); +#142863 = CARTESIAN_POINT('',(195.617083,-115.015139,1.585)); +#142864 = CIRCLE('',#142865,6.000020841632E-02); +#142865 = AXIS2_PLACEMENT_3D('',#142866,#142867,#142868); +#142866 = CARTESIAN_POINT('',(195.56165,-115.0381,1.585)); +#142867 = DIRECTION('',(0.,0.,-1.)); +#142868 = DIRECTION('',(-0.923880124139,0.382682004047,0.)); +#142869 = ORIENTED_EDGE('',*,*,#142870,.T.); +#142870 = EDGE_CURVE('',#142862,#142871,#142873,.T.); +#142871 = VERTEX_POINT('',#142872); +#142872 = CARTESIAN_POINT('',(195.62165,-115.0731,1.585)); +#142873 = LINE('',#142874,#142875); +#142874 = CARTESIAN_POINT('',(195.617083,-115.015139,1.585)); +#142875 = VECTOR('',#142876,1.); +#142876 = DIRECTION('',(7.855089539688E-02,-0.99691010469,0.)); +#142877 = ORIENTED_EDGE('',*,*,#142878,.T.); +#142878 = EDGE_CURVE('',#142871,#142879,#142881,.T.); +#142879 = VERTEX_POINT('',#142880); +#142880 = CARTESIAN_POINT('',(199.62165,-115.0731,1.585)); +#142881 = LINE('',#142882,#142883); +#142882 = CARTESIAN_POINT('',(195.62165,-115.0731,1.585)); +#142883 = VECTOR('',#142884,1.); +#142884 = DIRECTION('',(1.,0.,0.)); +#142885 = ORIENTED_EDGE('',*,*,#142886,.T.); +#142886 = EDGE_CURVE('',#142879,#142887,#142889,.T.); +#142887 = VERTEX_POINT('',#142888); +#142888 = CARTESIAN_POINT('',(199.626217,-115.015139,1.585)); +#142889 = LINE('',#142890,#142891); +#142890 = CARTESIAN_POINT('',(199.62165,-115.0731,1.585)); +#142891 = VECTOR('',#142892,1.); +#142892 = DIRECTION('',(7.855089539737E-02,0.99691010469,0.)); +#142893 = ORIENTED_EDGE('',*,*,#142894,.T.); +#142894 = EDGE_CURVE('',#142887,#142895,#142897,.T.); +#142895 = VERTEX_POINT('',#142896); +#142896 = CARTESIAN_POINT('',(199.74165,-115.0381,1.585)); +#142897 = CIRCLE('',#142898,6.000007318647E-02); +#142898 = AXIS2_PLACEMENT_3D('',#142899,#142900,#142901); +#142899 = CARTESIAN_POINT('',(199.68164992681,-115.0380998233,1.585)); +#142900 = DIRECTION('',(0.,0.,-1.)); +#142901 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#142902 = ORIENTED_EDGE('',*,*,#142903,.T.); +#142903 = EDGE_CURVE('',#142895,#142904,#142906,.T.); +#142904 = VERTEX_POINT('',#142905); +#142905 = CARTESIAN_POINT('',(199.74165,-115.1331,1.585)); +#142906 = LINE('',#142907,#142908); +#142907 = CARTESIAN_POINT('',(199.74165,-115.0381,1.585)); +#142908 = VECTOR('',#142909,1.); +#142909 = DIRECTION('',(0.,-1.,0.)); +#142910 = ORIENTED_EDGE('',*,*,#142911,.T.); +#142911 = EDGE_CURVE('',#142904,#142912,#142914,.T.); +#142912 = VERTEX_POINT('',#142913); +#142913 = CARTESIAN_POINT('',(199.68165,-115.1931,1.585)); +#142914 = CIRCLE('',#142915,5.999932016256E-02); +#142915 = AXIS2_PLACEMENT_3D('',#142916,#142917,#142918); +#142916 = CARTESIAN_POINT('',(199.68165067984,-115.1331006798,1.585)); +#142917 = DIRECTION('',(0.,0.,-1.)); +#142918 = DIRECTION('',(0.999999999936,1.133081659513E-05,0.)); +#142919 = ORIENTED_EDGE('',*,*,#142920,.T.); +#142920 = EDGE_CURVE('',#142912,#142921,#142923,.T.); +#142921 = VERTEX_POINT('',#142922); +#142922 = CARTESIAN_POINT('',(195.56165,-115.1931,1.585)); +#142923 = LINE('',#142924,#142925); +#142924 = CARTESIAN_POINT('',(199.68165,-115.1931,1.585)); +#142925 = VECTOR('',#142926,1.); +#142926 = DIRECTION('',(-1.,0.,0.)); +#142927 = ORIENTED_EDGE('',*,*,#142928,.T.); +#142928 = EDGE_CURVE('',#142921,#142929,#142931,.T.); +#142929 = VERTEX_POINT('',#142930); +#142930 = CARTESIAN_POINT('',(195.50165,-115.1331,1.585)); +#142931 = CIRCLE('',#142932,5.999932016256E-02); +#142932 = AXIS2_PLACEMENT_3D('',#142933,#142934,#142935); +#142933 = CARTESIAN_POINT('',(195.56164932015,-115.1331006798,1.585)); +#142934 = DIRECTION('',(0.,0.,-1.)); +#142935 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#142936 = ORIENTED_EDGE('',*,*,#142937,.T.); +#142937 = EDGE_CURVE('',#142929,#142938,#142940,.T.); +#142938 = VERTEX_POINT('',#142939); +#142939 = CARTESIAN_POINT('',(195.50165,-115.0381,1.585)); +#142940 = LINE('',#142941,#142942); +#142941 = CARTESIAN_POINT('',(195.50165,-115.1331,1.585)); +#142942 = VECTOR('',#142943,1.); +#142943 = DIRECTION('',(0.,1.,0.)); +#142944 = ORIENTED_EDGE('',*,*,#142945,.T.); +#142945 = EDGE_CURVE('',#142938,#142860,#142946,.T.); +#142946 = LINE('',#142947,#142948); +#142947 = CARTESIAN_POINT('',(195.50165,-115.0381,1.585)); +#142948 = VECTOR('',#142949,1.); +#142949 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#142950 = PLANE('',#142951); +#142951 = AXIS2_PLACEMENT_3D('',#142952,#142953,#142954); +#142952 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142953 = DIRECTION('',(0.,0.,1.)); +#142954 = DIRECTION('',(1.,0.,-0.)); +#142955 = SHELL_BASED_SURFACE_MODEL('',(#142956)); +#142956 = OPEN_SHELL('',(#142957)); +#142957 = ADVANCED_FACE('',(#142958),#142994,.T.); +#142958 = FACE_BOUND('',#142959,.F.); +#142959 = EDGE_LOOP('',(#142960,#142971,#142979,#142988)); +#142960 = ORIENTED_EDGE('',*,*,#142961,.T.); +#142961 = EDGE_CURVE('',#142962,#142964,#142966,.T.); +#142962 = VERTEX_POINT('',#142963); +#142963 = CARTESIAN_POINT('',(187.82607,-114.3731,1.585)); +#142964 = VERTEX_POINT('',#142965); +#142965 = CARTESIAN_POINT('',(187.82607,-114.2531,1.585)); +#142966 = CIRCLE('',#142967,6.000000000042E-02); +#142967 = AXIS2_PLACEMENT_3D('',#142968,#142969,#142970); +#142968 = CARTESIAN_POINT('',(187.82606977441,-114.3131,1.585)); +#142969 = DIRECTION('',(0.,0.,-1.)); +#142970 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#142971 = ORIENTED_EDGE('',*,*,#142972,.T.); +#142972 = EDGE_CURVE('',#142964,#142973,#142975,.T.); +#142973 = VERTEX_POINT('',#142974); +#142974 = CARTESIAN_POINT('',(188.10723,-114.2531,1.585)); +#142975 = LINE('',#142976,#142977); +#142976 = CARTESIAN_POINT('',(187.82607,-114.2531,1.585)); +#142977 = VECTOR('',#142978,1.); +#142978 = DIRECTION('',(1.,0.,0.)); +#142979 = ORIENTED_EDGE('',*,*,#142980,.T.); +#142980 = EDGE_CURVE('',#142973,#142981,#142983,.T.); +#142981 = VERTEX_POINT('',#142982); +#142982 = CARTESIAN_POINT('',(188.10723,-114.3731,1.585)); +#142983 = CIRCLE('',#142984,6.000000000042E-02); +#142984 = AXIS2_PLACEMENT_3D('',#142985,#142986,#142987); +#142985 = CARTESIAN_POINT('',(188.10723022558,-114.3131,1.585)); +#142986 = DIRECTION('',(0.,0.,-1.)); +#142987 = DIRECTION('',(-3.75979472738E-06,0.999999999993,-0.)); +#142988 = ORIENTED_EDGE('',*,*,#142989,.T.); +#142989 = EDGE_CURVE('',#142981,#142962,#142990,.T.); +#142990 = LINE('',#142991,#142992); +#142991 = CARTESIAN_POINT('',(188.10723,-114.3731,1.585)); +#142992 = VECTOR('',#142993,1.); +#142993 = DIRECTION('',(-1.,0.,0.)); +#142994 = PLANE('',#142995); +#142995 = AXIS2_PLACEMENT_3D('',#142996,#142997,#142998); +#142996 = CARTESIAN_POINT('',(0.,0.,1.585)); +#142997 = DIRECTION('',(0.,0.,1.)); +#142998 = DIRECTION('',(1.,0.,-0.)); +#142999 = SHELL_BASED_SURFACE_MODEL('',(#143000)); +#143000 = OPEN_SHELL('',(#143001)); +#143001 = ADVANCED_FACE('',(#143002,#143104),#143172,.T.); +#143002 = FACE_BOUND('',#143003,.F.); +#143003 = EDGE_LOOP('',(#143004,#143015,#143023,#143031,#143040,#143048, + #143057,#143065,#143073,#143082,#143090,#143098)); +#143004 = ORIENTED_EDGE('',*,*,#143005,.T.); +#143005 = EDGE_CURVE('',#143006,#143008,#143010,.T.); +#143006 = VERTEX_POINT('',#143007); +#143007 = CARTESIAN_POINT('',(189.282125,-113.118892,1.585)); +#143008 = VERTEX_POINT('',#143009); +#143009 = CARTESIAN_POINT('',(189.368989,-113.12242,1.585)); +#143010 = CIRCLE('',#143011,7.226649079677E-02); +#143011 = AXIS2_PLACEMENT_3D('',#143012,#143013,#143014); +#143012 = CARTESIAN_POINT('',(189.32321412996,-113.1783405415,1.585)); +#143013 = DIRECTION('',(0.,0.,-1.)); +#143014 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#143015 = ORIENTED_EDGE('',*,*,#143016,.T.); +#143016 = EDGE_CURVE('',#143008,#143017,#143019,.T.); +#143017 = VERTEX_POINT('',#143018); +#143018 = CARTESIAN_POINT('',(189.404399,-113.107693,1.585)); +#143019 = LINE('',#143020,#143021); +#143020 = CARTESIAN_POINT('',(189.368989,-113.12242,1.585)); +#143021 = VECTOR('',#143022,1.); +#143022 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#143023 = ORIENTED_EDGE('',*,*,#143024,.T.); +#143024 = EDGE_CURVE('',#143017,#143025,#143027,.T.); +#143025 = VERTEX_POINT('',#143026); +#143026 = CARTESIAN_POINT('',(189.624139,-113.107693,1.585)); +#143027 = LINE('',#143028,#143029); +#143028 = CARTESIAN_POINT('',(189.404399,-113.107693,1.585)); +#143029 = VECTOR('',#143030,1.); +#143030 = DIRECTION('',(1.,0.,0.)); +#143031 = ORIENTED_EDGE('',*,*,#143032,.T.); +#143032 = EDGE_CURVE('',#143025,#143033,#143035,.T.); +#143033 = VERTEX_POINT('',#143034); +#143034 = CARTESIAN_POINT('',(189.873542,-113.357096,1.585)); +#143035 = CIRCLE('',#143036,0.347870264855); +#143036 = AXIS2_PLACEMENT_3D('',#143037,#143038,#143039); +#143037 = CARTESIAN_POINT('',(189.53681126502,-113.4444237349,1.585)); +#143038 = DIRECTION('',(0.,0.,-1.)); +#143039 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#143040 = ORIENTED_EDGE('',*,*,#143041,.T.); +#143041 = EDGE_CURVE('',#143033,#143042,#143044,.T.); +#143042 = VERTEX_POINT('',#143043); +#143043 = CARTESIAN_POINT('',(189.87232,-113.677252,1.585)); +#143044 = LINE('',#143045,#143046); +#143045 = CARTESIAN_POINT('',(189.873542,-113.357096,1.585)); +#143046 = VECTOR('',#143047,1.); +#143047 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#143048 = ORIENTED_EDGE('',*,*,#143049,.T.); +#143049 = EDGE_CURVE('',#143042,#143050,#143052,.T.); +#143050 = VERTEX_POINT('',#143051); +#143051 = CARTESIAN_POINT('',(189.624139,-113.921478,1.585)); +#143052 = CIRCLE('',#143053,0.348635327447); +#143053 = AXIS2_PLACEMENT_3D('',#143054,#143055,#143056); +#143054 = CARTESIAN_POINT('',(189.53636748129,-113.5840720841,1.585)); +#143055 = DIRECTION('',(0.,0.,-1.)); +#143056 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#143057 = ORIENTED_EDGE('',*,*,#143058,.T.); +#143058 = EDGE_CURVE('',#143050,#143059,#143061,.T.); +#143059 = VERTEX_POINT('',#143060); +#143060 = CARTESIAN_POINT('',(189.398793,-113.920092,1.585)); +#143061 = LINE('',#143062,#143063); +#143062 = CARTESIAN_POINT('',(189.624139,-113.921478,1.585)); +#143063 = VECTOR('',#143064,1.); +#143064 = DIRECTION('',(-0.999981085954,6.150425501802E-03,0.)); +#143065 = ORIENTED_EDGE('',*,*,#143066,.T.); +#143066 = EDGE_CURVE('',#143059,#143067,#143069,.T.); +#143067 = VERTEX_POINT('',#143068); +#143068 = CARTESIAN_POINT('',(189.397352,-114.195884,1.585)); +#143069 = LINE('',#143070,#143071); +#143070 = CARTESIAN_POINT('',(189.398793,-113.920092,1.585)); +#143071 = VECTOR('',#143072,1.); +#143072 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#143073 = ORIENTED_EDGE('',*,*,#143074,.T.); +#143074 = EDGE_CURVE('',#143067,#143075,#143077,.T.); +#143075 = VERTEX_POINT('',#143076); +#143076 = CARTESIAN_POINT('',(189.248793,-114.181252,1.585)); +#143077 = CIRCLE('',#143078,7.500006711464E-02); +#143078 = AXIS2_PLACEMENT_3D('',#143079,#143080,#143081); +#143079 = CARTESIAN_POINT('',(189.32379306711,-114.1812520671,1.585)); +#143080 = DIRECTION('',(-0.,0.,-1.)); +#143081 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#143082 = ORIENTED_EDGE('',*,*,#143083,.T.); +#143083 = EDGE_CURVE('',#143075,#143084,#143086,.T.); +#143084 = VERTEX_POINT('',#143085); +#143085 = CARTESIAN_POINT('',(189.250234,-113.16662,1.585)); +#143086 = LINE('',#143087,#143088); +#143087 = CARTESIAN_POINT('',(189.248793,-114.181252,1.585)); +#143088 = VECTOR('',#143089,1.); +#143089 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#143090 = ORIENTED_EDGE('',*,*,#143091,.T.); +#143091 = EDGE_CURVE('',#143084,#143092,#143094,.T.); +#143092 = VERTEX_POINT('',#143093); +#143093 = CARTESIAN_POINT('',(189.261433,-113.139584,1.585)); +#143094 = LINE('',#143095,#143096); +#143095 = CARTESIAN_POINT('',(189.250234,-113.16662,1.585)); +#143096 = VECTOR('',#143097,1.); +#143097 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#143098 = ORIENTED_EDGE('',*,*,#143099,.T.); +#143099 = EDGE_CURVE('',#143092,#143006,#143100,.T.); +#143100 = LINE('',#143101,#143102); +#143101 = CARTESIAN_POINT('',(189.261433,-113.139584,1.585)); +#143102 = VECTOR('',#143103,1.); +#143103 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#143104 = FACE_BOUND('',#143105,.F.); +#143105 = EDGE_LOOP('',(#143106,#143117,#143125,#143133,#143141,#143149, + #143157,#143166)); +#143106 = ORIENTED_EDGE('',*,*,#143107,.T.); +#143107 = EDGE_CURVE('',#143108,#143110,#143112,.T.); +#143108 = VERTEX_POINT('',#143109); +#143109 = CARTESIAN_POINT('',(189.724983,-113.389433,1.585)); +#143110 = VERTEX_POINT('',#143111); +#143111 = CARTESIAN_POINT('',(189.591802,-113.256252,1.585)); +#143112 = CIRCLE('',#143113,0.18686440374); +#143113 = AXIS2_PLACEMENT_3D('',#143114,#143115,#143116); +#143114 = CARTESIAN_POINT('',(189.544266,-113.436969,1.585)); +#143115 = DIRECTION('',(0.,0.,1.)); +#143116 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#143117 = ORIENTED_EDGE('',*,*,#143118,.T.); +#143118 = EDGE_CURVE('',#143110,#143119,#143121,.T.); +#143119 = VERTEX_POINT('',#143120); +#143120 = CARTESIAN_POINT('',(189.436736,-113.256252,1.585)); +#143121 = LINE('',#143122,#143123); +#143122 = CARTESIAN_POINT('',(189.591802,-113.256252,1.585)); +#143123 = VECTOR('',#143124,1.); +#143124 = DIRECTION('',(-1.,0.,0.)); +#143125 = ORIENTED_EDGE('',*,*,#143126,.T.); +#143126 = EDGE_CURVE('',#143119,#143127,#143129,.T.); +#143127 = VERTEX_POINT('',#143128); +#143128 = CARTESIAN_POINT('',(189.398793,-113.275223,1.585)); +#143129 = LINE('',#143130,#143131); +#143130 = CARTESIAN_POINT('',(189.436736,-113.256252,1.585)); +#143131 = VECTOR('',#143132,1.); +#143132 = DIRECTION('',(-0.894431905558,-0.447204166259,0.)); +#143133 = ORIENTED_EDGE('',*,*,#143134,.T.); +#143134 = EDGE_CURVE('',#143127,#143135,#143137,.T.); +#143135 = VERTEX_POINT('',#143136); +#143136 = CARTESIAN_POINT('',(189.398793,-113.753947,1.585)); +#143137 = LINE('',#143138,#143139); +#143138 = CARTESIAN_POINT('',(189.398793,-113.275223,1.585)); +#143139 = VECTOR('',#143140,1.); +#143140 = DIRECTION('',(0.,-1.,0.)); +#143141 = ORIENTED_EDGE('',*,*,#143142,.T.); +#143142 = EDGE_CURVE('',#143135,#143143,#143145,.T.); +#143143 = VERTEX_POINT('',#143144); +#143144 = CARTESIAN_POINT('',(189.436736,-113.772919,1.585)); +#143145 = LINE('',#143146,#143147); +#143146 = CARTESIAN_POINT('',(189.398793,-113.753947,1.585)); +#143147 = VECTOR('',#143148,1.); +#143148 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#143149 = ORIENTED_EDGE('',*,*,#143150,.T.); +#143150 = EDGE_CURVE('',#143143,#143151,#143153,.T.); +#143151 = VERTEX_POINT('',#143152); +#143152 = CARTESIAN_POINT('',(189.591802,-113.772919,1.585)); +#143153 = LINE('',#143154,#143155); +#143154 = CARTESIAN_POINT('',(189.436736,-113.772919,1.585)); +#143155 = VECTOR('',#143156,1.); +#143156 = DIRECTION('',(1.,0.,0.)); +#143157 = ORIENTED_EDGE('',*,*,#143158,.T.); +#143158 = EDGE_CURVE('',#143151,#143159,#143161,.T.); +#143159 = VERTEX_POINT('',#143160); +#143160 = CARTESIAN_POINT('',(189.724983,-113.639737,1.585)); +#143161 = CIRCLE('',#143162,0.186867760544); +#143162 = AXIS2_PLACEMENT_3D('',#143163,#143164,#143165); +#143163 = CARTESIAN_POINT('',(189.54426296928,-113.5921993262,1.585)); +#143164 = DIRECTION('',(0.,0.,1.)); +#143165 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#143166 = ORIENTED_EDGE('',*,*,#143167,.T.); +#143167 = EDGE_CURVE('',#143159,#143108,#143168,.T.); +#143168 = LINE('',#143169,#143170); +#143169 = CARTESIAN_POINT('',(189.724983,-113.639737,1.585)); +#143170 = VECTOR('',#143171,1.); +#143171 = DIRECTION('',(0.,1.,0.)); +#143172 = PLANE('',#143173); +#143173 = AXIS2_PLACEMENT_3D('',#143174,#143175,#143176); +#143174 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143175 = DIRECTION('',(0.,0.,1.)); +#143176 = DIRECTION('',(1.,0.,-0.)); +#143177 = SHELL_BASED_SURFACE_MODEL('',(#143178)); +#143178 = OPEN_SHELL('',(#143179)); +#143179 = ADVANCED_FACE('',(#143180),#143224,.T.); +#143180 = FACE_BOUND('',#143181,.F.); +#143181 = EDGE_LOOP('',(#143182,#143193,#143201,#143209,#143218)); +#143182 = ORIENTED_EDGE('',*,*,#143183,.T.); +#143183 = EDGE_CURVE('',#143184,#143186,#143188,.T.); +#143184 = VERTEX_POINT('',#143185); +#143185 = CARTESIAN_POINT('',(165.64165,-114.2331,1.585)); +#143186 = VERTEX_POINT('',#143187); +#143187 = CARTESIAN_POINT('',(165.64165,-114.1131,1.585)); +#143188 = CIRCLE('',#143189,6.000000000042E-02); +#143189 = AXIS2_PLACEMENT_3D('',#143190,#143191,#143192); +#143190 = CARTESIAN_POINT('',(165.64164977441,-114.1731,1.585)); +#143191 = DIRECTION('',(0.,0.,-1.)); +#143192 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#143193 = ORIENTED_EDGE('',*,*,#143194,.T.); +#143194 = EDGE_CURVE('',#143186,#143195,#143197,.T.); +#143195 = VERTEX_POINT('',#143196); +#143196 = CARTESIAN_POINT('',(169.590132,-114.1131,1.585)); +#143197 = LINE('',#143198,#143199); +#143198 = CARTESIAN_POINT('',(165.64165,-114.1131,1.585)); +#143199 = VECTOR('',#143200,1.); +#143200 = DIRECTION('',(1.,0.,0.)); +#143201 = ORIENTED_EDGE('',*,*,#143202,.T.); +#143202 = EDGE_CURVE('',#143195,#143203,#143205,.T.); +#143203 = VERTEX_POINT('',#143204); +#143204 = CARTESIAN_POINT('',(169.590132,-114.116464,1.585)); +#143205 = LINE('',#143206,#143207); +#143206 = CARTESIAN_POINT('',(169.590132,-114.1131,1.585)); +#143207 = VECTOR('',#143208,1.); +#143208 = DIRECTION('',(0.,-1.,0.)); +#143209 = ORIENTED_EDGE('',*,*,#143210,.T.); +#143210 = EDGE_CURVE('',#143203,#143211,#143213,.T.); +#143211 = VERTEX_POINT('',#143212); +#143212 = CARTESIAN_POINT('',(169.705046,-114.2331,1.585)); +#143213 = CIRCLE('',#143214,0.148598700063); +#143214 = AXIS2_PLACEMENT_3D('',#143215,#143216,#143217); +#143215 = CARTESIAN_POINT('',(169.73592928371,-114.0877459617,1.585)); +#143216 = DIRECTION('',(0.,0.,1.)); +#143217 = DIRECTION('',(-0.981147773484,-0.193259014244,0.)); +#143218 = ORIENTED_EDGE('',*,*,#143219,.T.); +#143219 = EDGE_CURVE('',#143211,#143184,#143220,.T.); +#143220 = LINE('',#143221,#143222); +#143221 = CARTESIAN_POINT('',(169.705046,-114.2331,1.585)); +#143222 = VECTOR('',#143223,1.); +#143223 = DIRECTION('',(-1.,0.,0.)); +#143224 = PLANE('',#143225); +#143225 = AXIS2_PLACEMENT_3D('',#143226,#143227,#143228); +#143226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143227 = DIRECTION('',(0.,0.,1.)); +#143228 = DIRECTION('',(1.,0.,-0.)); +#143229 = SHELL_BASED_SURFACE_MODEL('',(#143230)); +#143230 = OPEN_SHELL('',(#143231)); +#143231 = ADVANCED_FACE('',(#143232),#143391,.T.); +#143232 = FACE_BOUND('',#143233,.F.); +#143233 = EDGE_LOOP('',(#143234,#143245,#143253,#143261,#143269,#143277, + #143285,#143293,#143302,#143310,#143319,#143327,#143335,#143343, + #143352,#143360,#143368,#143376,#143385)); +#143234 = ORIENTED_EDGE('',*,*,#143235,.T.); +#143235 = EDGE_CURVE('',#143236,#143238,#143240,.T.); +#143236 = VERTEX_POINT('',#143237); +#143237 = CARTESIAN_POINT('',(190.195014,-112.828456,1.585)); +#143238 = VERTEX_POINT('',#143239); +#143239 = CARTESIAN_POINT('',(190.704409,-112.837786,1.585)); +#143240 = CIRCLE('',#143241,0.450326844012); +#143241 = AXIS2_PLACEMENT_3D('',#143242,#143243,#143244); +#143242 = CARTESIAN_POINT('',(190.4429110301,-113.2044098919,1.585)); +#143243 = DIRECTION('',(0.,0.,-1.)); +#143244 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#143245 = ORIENTED_EDGE('',*,*,#143246,.T.); +#143246 = EDGE_CURVE('',#143238,#143247,#143249,.T.); +#143247 = VERTEX_POINT('',#143248); +#143248 = CARTESIAN_POINT('',(190.767862,-112.903316,1.585)); +#143249 = LINE('',#143250,#143251); +#143250 = CARTESIAN_POINT('',(190.704409,-112.837786,1.585)); +#143251 = VECTOR('',#143252,1.); +#143252 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#143253 = ORIENTED_EDGE('',*,*,#143254,.T.); +#143254 = EDGE_CURVE('',#143247,#143255,#143257,.T.); +#143255 = VERTEX_POINT('',#143256); +#143256 = CARTESIAN_POINT('',(190.825923,-113.023763,1.585)); +#143257 = LINE('',#143258,#143259); +#143258 = CARTESIAN_POINT('',(190.767862,-112.903316,1.585)); +#143259 = VECTOR('',#143260,1.); +#143260 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#143261 = ORIENTED_EDGE('',*,*,#143262,.T.); +#143262 = EDGE_CURVE('',#143255,#143263,#143265,.T.); +#143263 = VERTEX_POINT('',#143264); +#143264 = CARTESIAN_POINT('',(190.825164,-113.150095,1.585)); +#143265 = LINE('',#143266,#143267); +#143266 = CARTESIAN_POINT('',(190.825923,-113.023763,1.585)); +#143267 = VECTOR('',#143268,1.); +#143268 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#143269 = ORIENTED_EDGE('',*,*,#143270,.T.); +#143270 = EDGE_CURVE('',#143263,#143271,#143273,.T.); +#143271 = VERTEX_POINT('',#143272); +#143272 = CARTESIAN_POINT('',(190.767106,-113.318158,1.585)); +#143273 = LINE('',#143274,#143275); +#143274 = CARTESIAN_POINT('',(190.825164,-113.150095,1.585)); +#143275 = VECTOR('',#143276,1.); +#143276 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#143277 = ORIENTED_EDGE('',*,*,#143278,.T.); +#143278 = EDGE_CURVE('',#143271,#143279,#143281,.T.); +#143279 = VERTEX_POINT('',#143280); +#143280 = CARTESIAN_POINT('',(190.314383,-113.772919,1.585)); +#143281 = LINE('',#143282,#143283); +#143282 = CARTESIAN_POINT('',(190.767106,-113.318158,1.585)); +#143283 = VECTOR('',#143284,1.); +#143284 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#143285 = ORIENTED_EDGE('',*,*,#143286,.T.); +#143286 = EDGE_CURVE('',#143279,#143287,#143289,.T.); +#143287 = VERTEX_POINT('',#143288); +#143288 = CARTESIAN_POINT('',(190.766996,-113.77436,1.585)); +#143289 = LINE('',#143290,#143291); +#143290 = CARTESIAN_POINT('',(190.314383,-113.772919,1.585)); +#143291 = VECTOR('',#143292,1.); +#143292 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#143293 = ORIENTED_EDGE('',*,*,#143294,.T.); +#143294 = EDGE_CURVE('',#143287,#143295,#143297,.T.); +#143295 = VERTEX_POINT('',#143296); +#143296 = CARTESIAN_POINT('',(190.752364,-113.922919,1.585)); +#143297 = CIRCLE('',#143298,7.500006711464E-02); +#143298 = AXIS2_PLACEMENT_3D('',#143299,#143300,#143301); +#143299 = CARTESIAN_POINT('',(190.75236406711,-113.8479189328,1.585)); +#143300 = DIRECTION('',(0.,0.,-1.)); +#143301 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#143302 = ORIENTED_EDGE('',*,*,#143303,.T.); +#143303 = EDGE_CURVE('',#143295,#143304,#143306,.T.); +#143304 = VERTEX_POINT('',#143305); +#143305 = CARTESIAN_POINT('',(190.118685,-113.921478,1.585)); +#143306 = LINE('',#143307,#143308); +#143307 = CARTESIAN_POINT('',(190.752364,-113.922919,1.585)); +#143308 = VECTOR('',#143309,1.); +#143309 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#143310 = ORIENTED_EDGE('',*,*,#143311,.T.); +#143311 = EDGE_CURVE('',#143304,#143312,#143314,.T.); +#143312 = VERTEX_POINT('',#143313); +#143313 = CARTESIAN_POINT('',(190.080284,-113.794886,1.585)); +#143314 = CIRCLE('',#143315,7.500021013107E-02); +#143315 = AXIS2_PLACEMENT_3D('',#143316,#143317,#143318); +#143316 = CARTESIAN_POINT('',(190.1333173167,-113.8479189976,1.585)); +#143317 = DIRECTION('',(0.,0.,-1.)); +#143318 = DIRECTION('',(-0.195097009435,-0.980783950169,-0.)); +#143319 = ORIENTED_EDGE('',*,*,#143320,.T.); +#143320 = EDGE_CURVE('',#143312,#143321,#143323,.T.); +#143321 = VERTEX_POINT('',#143322); +#143322 = CARTESIAN_POINT('',(190.639192,-113.235976,1.585)); +#143323 = LINE('',#143324,#143325); +#143324 = CARTESIAN_POINT('',(190.080284,-113.794886,1.585)); +#143325 = VECTOR('',#143326,1.); +#143326 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#143327 = ORIENTED_EDGE('',*,*,#143328,.T.); +#143328 = EDGE_CURVE('',#143321,#143329,#143331,.T.); +#143329 = VERTEX_POINT('',#143330); +#143330 = CARTESIAN_POINT('',(190.677364,-113.121463,1.585)); +#143331 = LINE('',#143332,#143333); +#143332 = CARTESIAN_POINT('',(190.639192,-113.235976,1.585)); +#143333 = VECTOR('',#143334,1.); +#143334 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#143335 = ORIENTED_EDGE('',*,*,#143336,.T.); +#143336 = EDGE_CURVE('',#143329,#143337,#143339,.T.); +#143337 = VERTEX_POINT('',#143338); +#143338 = CARTESIAN_POINT('',(190.677364,-113.0561,1.585)); +#143339 = LINE('',#143340,#143341); +#143340 = CARTESIAN_POINT('',(190.677364,-113.121463,1.585)); +#143341 = VECTOR('',#143342,1.); +#143342 = DIRECTION('',(0.,1.,0.)); +#143343 = ORIENTED_EDGE('',*,*,#143344,.T.); +#143344 = EDGE_CURVE('',#143337,#143345,#143347,.T.); +#143345 = VERTEX_POINT('',#143346); +#143346 = CARTESIAN_POINT('',(190.544183,-112.922919,1.585)); +#143347 = CIRCLE('',#143348,0.18686440374); +#143348 = AXIS2_PLACEMENT_3D('',#143349,#143350,#143351); +#143349 = CARTESIAN_POINT('',(190.496647,-113.103636,1.585)); +#143350 = DIRECTION('',(0.,0.,1.)); +#143351 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#143352 = ORIENTED_EDGE('',*,*,#143353,.T.); +#143353 = EDGE_CURVE('',#143345,#143354,#143356,.T.); +#143354 = VERTEX_POINT('',#143355); +#143355 = CARTESIAN_POINT('',(190.341498,-112.922919,1.585)); +#143356 = LINE('',#143357,#143358); +#143357 = CARTESIAN_POINT('',(190.544183,-112.922919,1.585)); +#143358 = VECTOR('',#143359,1.); +#143359 = DIRECTION('',(-1.,0.,0.)); +#143360 = ORIENTED_EDGE('',*,*,#143361,.T.); +#143361 = EDGE_CURVE('',#143354,#143362,#143364,.T.); +#143362 = VERTEX_POINT('',#143363); +#143363 = CARTESIAN_POINT('',(190.272982,-112.957177,1.585)); +#143364 = LINE('',#143365,#143366); +#143365 = CARTESIAN_POINT('',(190.341498,-112.922919,1.585)); +#143366 = VECTOR('',#143367,1.); +#143367 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#143368 = ORIENTED_EDGE('',*,*,#143369,.T.); +#143369 = EDGE_CURVE('',#143362,#143370,#143372,.T.); +#143370 = VERTEX_POINT('',#143371); +#143371 = CARTESIAN_POINT('',(190.222604,-113.005517,1.585)); +#143372 = LINE('',#143373,#143374); +#143373 = CARTESIAN_POINT('',(190.272982,-112.957177,1.585)); +#143374 = VECTOR('',#143375,1.); +#143375 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#143376 = ORIENTED_EDGE('',*,*,#143377,.T.); +#143377 = EDGE_CURVE('',#143370,#143378,#143380,.T.); +#143378 = VERTEX_POINT('',#143379); +#143379 = CARTESIAN_POINT('',(190.127903,-112.890124,1.585)); +#143380 = CIRCLE('',#143381,7.499996838526E-02); +#143381 = AXIS2_PLACEMENT_3D('',#143382,#143383,#143384); +#143382 = CARTESIAN_POINT('',(190.180936,-112.9431569724,1.585)); +#143383 = DIRECTION('',(0.,0.,-1.)); +#143384 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#143385 = ORIENTED_EDGE('',*,*,#143386,.T.); +#143386 = EDGE_CURVE('',#143378,#143236,#143387,.T.); +#143387 = LINE('',#143388,#143389); +#143388 = CARTESIAN_POINT('',(190.127903,-112.890124,1.585)); +#143389 = VECTOR('',#143390,1.); +#143390 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#143391 = PLANE('',#143392); +#143392 = AXIS2_PLACEMENT_3D('',#143393,#143394,#143395); +#143393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143394 = DIRECTION('',(0.,0.,1.)); +#143395 = DIRECTION('',(1.,0.,-0.)); +#143396 = SHELL_BASED_SURFACE_MODEL('',(#143397)); +#143397 = OPEN_SHELL('',(#143398)); +#143398 = ADVANCED_FACE('',(#143399),#143584,.T.); +#143399 = FACE_BOUND('',#143400,.F.); +#143400 = EDGE_LOOP('',(#143401,#143412,#143420,#143429,#143437,#143446, + #143454,#143463,#143471,#143479,#143487,#143496,#143504,#143513, + #143521,#143530,#143538,#143546,#143554,#143562,#143570,#143578)); +#143401 = ORIENTED_EDGE('',*,*,#143402,.T.); +#143402 = EDGE_CURVE('',#143403,#143405,#143407,.T.); +#143403 = VERTEX_POINT('',#143404); +#143404 = CARTESIAN_POINT('',(185.334269,-112.830381,1.585)); +#143405 = VERTEX_POINT('',#143406); +#143406 = CARTESIAN_POINT('',(185.794032,-112.833178,1.585)); +#143407 = CIRCLE('',#143408,0.46078517582); +#143408 = AXIS2_PLACEMENT_3D('',#143409,#143410,#143411); +#143409 = CARTESIAN_POINT('',(185.56172110897,-113.2311159702,1.585)); +#143410 = DIRECTION('',(0.,0.,-1.)); +#143411 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#143412 = ORIENTED_EDGE('',*,*,#143413,.T.); +#143413 = EDGE_CURVE('',#143405,#143414,#143416,.T.); +#143414 = VERTEX_POINT('',#143415); +#143415 = CARTESIAN_POINT('',(185.862343,-112.901489,1.585)); +#143416 = LINE('',#143417,#143418); +#143417 = CARTESIAN_POINT('',(185.794032,-112.833178,1.585)); +#143418 = VECTOR('',#143419,1.); +#143419 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#143420 = ORIENTED_EDGE('',*,*,#143421,.T.); +#143421 = EDGE_CURVE('',#143414,#143422,#143424,.T.); +#143422 = VERTEX_POINT('',#143423); +#143423 = CARTESIAN_POINT('',(185.74695,-112.99619,1.585)); +#143424 = CIRCLE('',#143425,7.500003178657E-02); +#143425 = AXIS2_PLACEMENT_3D('',#143426,#143427,#143428); +#143426 = CARTESIAN_POINT('',(185.79998256212,-112.9431565,1.585)); +#143427 = DIRECTION('',(0.,0.,-1.)); +#143428 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#143429 = ORIENTED_EDGE('',*,*,#143430,.T.); +#143430 = EDGE_CURVE('',#143422,#143431,#143433,.T.); +#143431 = VERTEX_POINT('',#143432); +#143432 = CARTESIAN_POINT('',(185.71185,-112.96109,1.585)); +#143433 = LINE('',#143434,#143435); +#143434 = CARTESIAN_POINT('',(185.74695,-112.99619,1.585)); +#143435 = VECTOR('',#143436,1.); +#143436 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#143437 = ORIENTED_EDGE('',*,*,#143438,.T.); +#143438 = EDGE_CURVE('',#143431,#143439,#143441,.T.); +#143439 = VERTEX_POINT('',#143440); +#143440 = CARTESIAN_POINT('',(185.411926,-112.96109,1.585)); +#143441 = CIRCLE('',#143442,0.299308637371); +#143442 = AXIS2_PLACEMENT_3D('',#143443,#143444,#143445); +#143443 = CARTESIAN_POINT('',(185.561888,-113.220121,1.585)); +#143444 = DIRECTION('',(0.,0.,1.)); +#143445 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#143446 = ORIENTED_EDGE('',*,*,#143447,.T.); +#143447 = EDGE_CURVE('',#143439,#143448,#143450,.T.); +#143448 = VERTEX_POINT('',#143449); +#143449 = CARTESIAN_POINT('',(185.337813,-113.035203,1.585)); +#143450 = LINE('',#143451,#143452); +#143451 = CARTESIAN_POINT('',(185.411926,-112.96109,1.585)); +#143452 = VECTOR('',#143453,1.); +#143453 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#143454 = ORIENTED_EDGE('',*,*,#143455,.T.); +#143455 = EDGE_CURVE('',#143448,#143456,#143458,.T.); +#143456 = VERTEX_POINT('',#143457); +#143457 = CARTESIAN_POINT('',(185.255936,-113.410113,1.585)); +#143458 = CIRCLE('',#143459,0.611712714363); +#143459 = AXIS2_PLACEMENT_3D('',#143460,#143461,#143462); +#143460 = CARTESIAN_POINT('',(185.86434127521,-113.3465876822,1.585)); +#143461 = DIRECTION('',(0.,0.,1.)); +#143462 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#143463 = ORIENTED_EDGE('',*,*,#143464,.T.); +#143464 = EDGE_CURVE('',#143456,#143465,#143467,.T.); +#143465 = VERTEX_POINT('',#143466); +#143466 = CARTESIAN_POINT('',(185.299319,-113.583647,1.585)); +#143467 = LINE('',#143468,#143469); +#143468 = CARTESIAN_POINT('',(185.255936,-113.410113,1.585)); +#143469 = VECTOR('',#143470,1.); +#143470 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#143471 = ORIENTED_EDGE('',*,*,#143472,.T.); +#143472 = EDGE_CURVE('',#143465,#143473,#143475,.T.); +#143473 = VERTEX_POINT('',#143474); +#143474 = CARTESIAN_POINT('',(185.337813,-113.660634,1.585)); +#143475 = LINE('',#143476,#143477); +#143476 = CARTESIAN_POINT('',(185.299319,-113.583647,1.585)); +#143477 = VECTOR('',#143478,1.); +#143478 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#143479 = ORIENTED_EDGE('',*,*,#143480,.T.); +#143480 = EDGE_CURVE('',#143473,#143481,#143483,.T.); +#143481 = VERTEX_POINT('',#143482); +#143482 = CARTESIAN_POINT('',(185.411926,-113.734748,1.585)); +#143483 = LINE('',#143484,#143485); +#143484 = CARTESIAN_POINT('',(185.337813,-113.660634,1.585)); +#143485 = VECTOR('',#143486,1.); +#143486 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#143487 = ORIENTED_EDGE('',*,*,#143488,.T.); +#143488 = EDGE_CURVE('',#143481,#143489,#143491,.T.); +#143489 = VERTEX_POINT('',#143490); +#143490 = CARTESIAN_POINT('',(185.71185,-113.734747,1.585)); +#143491 = CIRCLE('',#143492,0.299305962385); +#143492 = AXIS2_PLACEMENT_3D('',#143493,#143494,#143495); +#143493 = CARTESIAN_POINT('',(185.56188713635,-113.4757195909,1.585)); +#143494 = DIRECTION('',(0.,0.,1.)); +#143495 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#143496 = ORIENTED_EDGE('',*,*,#143497,.T.); +#143497 = EDGE_CURVE('',#143489,#143498,#143500,.T.); +#143498 = VERTEX_POINT('',#143499); +#143499 = CARTESIAN_POINT('',(185.758315,-113.69032,1.585)); +#143500 = LINE('',#143501,#143502); +#143501 = CARTESIAN_POINT('',(185.71185,-113.734747,1.585)); +#143502 = VECTOR('',#143503,1.); +#143503 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#143504 = ORIENTED_EDGE('',*,*,#143505,.T.); +#143505 = EDGE_CURVE('',#143498,#143506,#143508,.T.); +#143506 = VERTEX_POINT('',#143507); +#143507 = CARTESIAN_POINT('',(185.853016,-113.805713,1.585)); +#143508 = CIRCLE('',#143509,7.499993690112E-02); +#143509 = AXIS2_PLACEMENT_3D('',#143510,#143511,#143512); +#143510 = CARTESIAN_POINT('',(185.7999832483,-113.7526798237,1.585)); +#143511 = DIRECTION('',(0.,0.,-1.)); +#143512 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#143513 = ORIENTED_EDGE('',*,*,#143514,.T.); +#143514 = EDGE_CURVE('',#143506,#143515,#143517,.T.); +#143515 = VERTEX_POINT('',#143516); +#143516 = CARTESIAN_POINT('',(185.789506,-113.865457,1.585)); +#143517 = LINE('',#143518,#143519); +#143518 = CARTESIAN_POINT('',(185.853016,-113.805713,1.585)); +#143519 = VECTOR('',#143520,1.); +#143520 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#143521 = ORIENTED_EDGE('',*,*,#143522,.T.); +#143522 = EDGE_CURVE('',#143515,#143523,#143525,.T.); +#143523 = VERTEX_POINT('',#143524); +#143524 = CARTESIAN_POINT('',(185.329744,-113.862661,1.585)); +#143525 = CIRCLE('',#143526,0.461067828848); +#143526 = AXIS2_PLACEMENT_3D('',#143527,#143528,#143529); +#143527 = CARTESIAN_POINT('',(185.56205551268,-113.4643961335,1.585)); +#143528 = DIRECTION('',(-0.,0.,-1.)); +#143529 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#143530 = ORIENTED_EDGE('',*,*,#143531,.T.); +#143531 = EDGE_CURVE('',#143523,#143532,#143534,.T.); +#143532 = VERTEX_POINT('',#143533); +#143533 = CARTESIAN_POINT('',(185.213055,-113.744898,1.585)); +#143534 = LINE('',#143535,#143536); +#143535 = CARTESIAN_POINT('',(185.329744,-113.862661,1.585)); +#143536 = VECTOR('',#143537,1.); +#143537 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#143538 = ORIENTED_EDGE('',*,*,#143539,.T.); +#143539 = EDGE_CURVE('',#143532,#143540,#143542,.T.); +#143540 = VERTEX_POINT('',#143541); +#143541 = CARTESIAN_POINT('',(185.155794,-113.628013,1.585)); +#143542 = LINE('',#143543,#143544); +#143543 = CARTESIAN_POINT('',(185.213055,-113.744898,1.585)); +#143544 = VECTOR('',#143545,1.); +#143545 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#143546 = ORIENTED_EDGE('',*,*,#143547,.T.); +#143547 = EDGE_CURVE('',#143540,#143548,#143550,.T.); +#143548 = VERTEX_POINT('',#143549); +#143549 = CARTESIAN_POINT('',(185.105936,-113.419347,1.585)); +#143550 = LINE('',#143551,#143552); +#143551 = CARTESIAN_POINT('',(185.155794,-113.628013,1.585)); +#143552 = VECTOR('',#143553,1.); +#143553 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#143554 = ORIENTED_EDGE('',*,*,#143555,.T.); +#143555 = EDGE_CURVE('',#143548,#143556,#143558,.T.); +#143556 = VERTEX_POINT('',#143557); +#143557 = CARTESIAN_POINT('',(185.108175,-113.2583,1.585)); +#143558 = LINE('',#143559,#143560); +#143559 = CARTESIAN_POINT('',(185.105936,-113.419347,1.585)); +#143560 = VECTOR('',#143561,1.); +#143561 = DIRECTION('',(1.39014303055E-02,0.999903370449,0.)); +#143562 = ORIENTED_EDGE('',*,*,#143563,.T.); +#143563 = EDGE_CURVE('',#143556,#143564,#143566,.T.); +#143564 = VERTEX_POINT('',#143565); +#143565 = CARTESIAN_POINT('',(185.161473,-113.052473,1.585)); +#143566 = LINE('',#143567,#143568); +#143567 = CARTESIAN_POINT('',(185.108175,-113.2583,1.585)); +#143568 = VECTOR('',#143569,1.); +#143569 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#143570 = ORIENTED_EDGE('',*,*,#143571,.T.); +#143571 = EDGE_CURVE('',#143564,#143572,#143574,.T.); +#143572 = VERTEX_POINT('',#143573); +#143573 = CARTESIAN_POINT('',(185.218422,-112.943492,1.585)); +#143574 = LINE('',#143575,#143576); +#143575 = CARTESIAN_POINT('',(185.161473,-113.052473,1.585)); +#143576 = VECTOR('',#143577,1.); +#143577 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#143578 = ORIENTED_EDGE('',*,*,#143579,.T.); +#143579 = EDGE_CURVE('',#143572,#143403,#143580,.T.); +#143580 = LINE('',#143581,#143582); +#143581 = CARTESIAN_POINT('',(185.218422,-112.943492,1.585)); +#143582 = VECTOR('',#143583,1.); +#143583 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#143584 = PLANE('',#143585); +#143585 = AXIS2_PLACEMENT_3D('',#143586,#143587,#143588); +#143586 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143587 = DIRECTION('',(0.,0.,1.)); +#143588 = DIRECTION('',(1.,0.,-0.)); +#143589 = SHELL_BASED_SURFACE_MODEL('',(#143590)); +#143590 = OPEN_SHELL('',(#143591)); +#143591 = ADVANCED_FACE('',(#143592),#143736,.T.); +#143592 = FACE_BOUND('',#143593,.F.); +#143593 = EDGE_LOOP('',(#143594,#143605,#143613,#143622,#143630,#143638, + #143647,#143655,#143664,#143672,#143680,#143689,#143697,#143705, + #143714,#143722,#143730)); +#143594 = ORIENTED_EDGE('',*,*,#143595,.T.); +#143595 = EDGE_CURVE('',#143596,#143598,#143600,.T.); +#143596 = VERTEX_POINT('',#143597); +#143597 = CARTESIAN_POINT('',(186.236333,-113.165753,1.585)); +#143598 = VERTEX_POINT('',#143599); +#143599 = CARTESIAN_POINT('',(186.70311,-113.169621,1.585)); +#143600 = CIRCLE('',#143601,0.399448428941); +#143601 = AXIS2_PLACEMENT_3D('',#143602,#143603,#143604); +#143602 = CARTESIAN_POINT('',(186.46703533486,-113.4918442143,1.585)); +#143603 = DIRECTION('',(0.,0.,-1.)); +#143604 = DIRECTION('',(-0.577552239904,0.816353728589,0.)); +#143605 = ORIENTED_EDGE('',*,*,#143606,.T.); +#143606 = EDGE_CURVE('',#143598,#143607,#143609,.T.); +#143607 = VERTEX_POINT('',#143608); +#143608 = CARTESIAN_POINT('',(186.722283,-113.191729,1.585)); +#143609 = LINE('',#143610,#143611); +#143610 = CARTESIAN_POINT('',(186.70311,-113.169621,1.585)); +#143611 = VECTOR('',#143612,1.); +#143612 = DIRECTION('',(0.655178986934,-0.755473689205,0.)); +#143613 = ORIENTED_EDGE('',*,*,#143614,.T.); +#143614 = EDGE_CURVE('',#143607,#143615,#143617,.T.); +#143615 = VERTEX_POINT('',#143616); +#143616 = CARTESIAN_POINT('',(186.623585,-113.295953,1.585)); +#143617 = CIRCLE('',#143618,7.499986582492E-02); +#143618 = AXIS2_PLACEMENT_3D('',#143619,#143620,#143621); +#143619 = CARTESIAN_POINT('',(186.6571258973,-113.2288710495,1.585)); +#143620 = DIRECTION('',(0.,0.,-1.)); +#143621 = DIRECTION('',(0.868762923549,0.495228212713,0.)); +#143622 = ORIENTED_EDGE('',*,*,#143623,.T.); +#143623 = EDGE_CURVE('',#143615,#143624,#143626,.T.); +#143624 = VERTEX_POINT('',#143625); +#143625 = CARTESIAN_POINT('',(186.544183,-113.256252,1.585)); +#143626 = LINE('',#143627,#143628); +#143627 = CARTESIAN_POINT('',(186.623585,-113.295953,1.585)); +#143628 = VECTOR('',#143629,1.); +#143629 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#143630 = ORIENTED_EDGE('',*,*,#143631,.T.); +#143631 = EDGE_CURVE('',#143624,#143632,#143634,.T.); +#143632 = VERTEX_POINT('',#143633); +#143633 = CARTESIAN_POINT('',(186.389117,-113.256252,1.585)); +#143634 = LINE('',#143635,#143636); +#143635 = CARTESIAN_POINT('',(186.544183,-113.256252,1.585)); +#143636 = VECTOR('',#143637,1.); +#143637 = DIRECTION('',(-1.,0.,0.)); +#143638 = ORIENTED_EDGE('',*,*,#143639,.T.); +#143639 = EDGE_CURVE('',#143632,#143640,#143642,.T.); +#143640 = VERTEX_POINT('',#143641); +#143641 = CARTESIAN_POINT('',(186.255936,-113.389433,1.585)); +#143642 = CIRCLE('',#143643,0.18686440374); +#143643 = AXIS2_PLACEMENT_3D('',#143644,#143645,#143646); +#143644 = CARTESIAN_POINT('',(186.436653,-113.436969,1.585)); +#143645 = DIRECTION('',(0.,0.,1.)); +#143646 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#143647 = ORIENTED_EDGE('',*,*,#143648,.T.); +#143648 = EDGE_CURVE('',#143640,#143649,#143651,.T.); +#143649 = VERTEX_POINT('',#143650); +#143650 = CARTESIAN_POINT('',(186.255936,-113.639737,1.585)); +#143651 = LINE('',#143652,#143653); +#143652 = CARTESIAN_POINT('',(186.255936,-113.389433,1.585)); +#143653 = VECTOR('',#143654,1.); +#143654 = DIRECTION('',(0.,-1.,0.)); +#143655 = ORIENTED_EDGE('',*,*,#143656,.T.); +#143656 = EDGE_CURVE('',#143649,#143657,#143659,.T.); +#143657 = VERTEX_POINT('',#143658); +#143658 = CARTESIAN_POINT('',(186.389117,-113.772919,1.585)); +#143659 = CIRCLE('',#143660,0.186867373533); +#143660 = AXIS2_PLACEMENT_3D('',#143661,#143662,#143663); +#143661 = CARTESIAN_POINT('',(186.43665571388,-113.592199643,1.585)); +#143662 = DIRECTION('',(0.,0.,1.)); +#143663 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#143664 = ORIENTED_EDGE('',*,*,#143665,.T.); +#143665 = EDGE_CURVE('',#143657,#143666,#143668,.T.); +#143666 = VERTEX_POINT('',#143667); +#143667 = CARTESIAN_POINT('',(186.544183,-113.772919,1.585)); +#143668 = LINE('',#143669,#143670); +#143669 = CARTESIAN_POINT('',(186.389117,-113.772919,1.585)); +#143670 = VECTOR('',#143671,1.); +#143671 = DIRECTION('',(1.,0.,0.)); +#143672 = ORIENTED_EDGE('',*,*,#143673,.T.); +#143673 = EDGE_CURVE('',#143666,#143674,#143676,.T.); +#143674 = VERTEX_POINT('',#143675); +#143675 = CARTESIAN_POINT('',(186.637316,-113.727963,1.585)); +#143676 = LINE('',#143677,#143678); +#143677 = CARTESIAN_POINT('',(186.544183,-113.772919,1.585)); +#143678 = VECTOR('',#143679,1.); +#143679 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#143680 = ORIENTED_EDGE('',*,*,#143681,.T.); +#143681 = EDGE_CURVE('',#143674,#143682,#143684,.T.); +#143682 = VERTEX_POINT('',#143683); +#143683 = CARTESIAN_POINT('',(186.690667,-113.867382,1.585)); +#143684 = CIRCLE('',#143685,7.500029440468E-02); +#143685 = AXIS2_PLACEMENT_3D('',#143686,#143687,#143688); +#143686 = CARTESIAN_POINT('',(186.65712535132,-113.800299946,1.585)); +#143687 = DIRECTION('',(0.,0.,-1.)); +#143688 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#143689 = ORIENTED_EDGE('',*,*,#143690,.T.); +#143690 = EDGE_CURVE('',#143682,#143691,#143693,.T.); +#143691 = VERTEX_POINT('',#143692); +#143692 = CARTESIAN_POINT('',(186.57652,-113.921478,1.585)); +#143693 = LINE('',#143694,#143695); +#143694 = CARTESIAN_POINT('',(186.690667,-113.867382,1.585)); +#143695 = VECTOR('',#143696,1.); +#143696 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#143697 = ORIENTED_EDGE('',*,*,#143698,.T.); +#143698 = EDGE_CURVE('',#143691,#143699,#143701,.T.); +#143699 = VERTEX_POINT('',#143700); +#143700 = CARTESIAN_POINT('',(186.351602,-113.920256,1.585)); +#143701 = LINE('',#143702,#143703); +#143702 = CARTESIAN_POINT('',(186.57652,-113.921478,1.585)); +#143703 = VECTOR('',#143704,1.); +#143704 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#143705 = ORIENTED_EDGE('',*,*,#143706,.T.); +#143706 = EDGE_CURVE('',#143699,#143707,#143709,.T.); +#143707 = VERTEX_POINT('',#143708); +#143708 = CARTESIAN_POINT('',(186.107377,-113.672074,1.585)); +#143709 = CIRCLE('',#143710,0.348628446662); +#143710 = AXIS2_PLACEMENT_3D('',#143711,#143712,#143713); +#143711 = CARTESIAN_POINT('',(186.44477761322,-113.5843094284,1.585)); +#143712 = DIRECTION('',(0.,0.,-1.)); +#143713 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#143714 = ORIENTED_EDGE('',*,*,#143715,.T.); +#143715 = EDGE_CURVE('',#143707,#143716,#143718,.T.); +#143716 = VERTEX_POINT('',#143717); +#143717 = CARTESIAN_POINT('',(186.108599,-113.351919,1.585)); +#143718 = LINE('',#143719,#143720); +#143719 = CARTESIAN_POINT('',(186.107377,-113.672074,1.585)); +#143720 = VECTOR('',#143721,1.); +#143721 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#143722 = ORIENTED_EDGE('',*,*,#143723,.T.); +#143723 = EDGE_CURVE('',#143716,#143724,#143726,.T.); +#143724 = VERTEX_POINT('',#143725); +#143725 = CARTESIAN_POINT('',(186.170803,-113.229206,1.585)); +#143726 = LINE('',#143727,#143728); +#143727 = CARTESIAN_POINT('',(186.108599,-113.351919,1.585)); +#143728 = VECTOR('',#143729,1.); +#143729 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#143730 = ORIENTED_EDGE('',*,*,#143731,.T.); +#143731 = EDGE_CURVE('',#143724,#143596,#143732,.T.); +#143732 = LINE('',#143733,#143734); +#143733 = CARTESIAN_POINT('',(186.170803,-113.229206,1.585)); +#143734 = VECTOR('',#143735,1.); +#143735 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#143736 = PLANE('',#143737); +#143737 = AXIS2_PLACEMENT_3D('',#143738,#143739,#143740); +#143738 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143739 = DIRECTION('',(0.,0.,1.)); +#143740 = DIRECTION('',(1.,0.,-0.)); +#143741 = SHELL_BASED_SURFACE_MODEL('',(#143742)); +#143742 = OPEN_SHELL('',(#143743)); +#143743 = ADVANCED_FACE('',(#143744,#143821),#143898,.T.); +#143744 = FACE_BOUND('',#143745,.F.); +#143745 = EDGE_LOOP('',(#143746,#143757,#143765,#143773,#143782,#143790, + #143799,#143807,#143815)); +#143746 = ORIENTED_EDGE('',*,*,#143747,.T.); +#143747 = EDGE_CURVE('',#143748,#143750,#143752,.T.); +#143748 = VERTEX_POINT('',#143749); +#143749 = CARTESIAN_POINT('',(187.093476,-113.165753,1.585)); +#143750 = VERTEX_POINT('',#143751); +#143751 = CARTESIAN_POINT('',(187.577386,-113.236649,1.585)); +#143752 = CIRCLE('',#143753,0.34461174713); +#143753 = AXIS2_PLACEMENT_3D('',#143754,#143755,#143756); +#143754 = CARTESIAN_POINT('',(187.30023294377,-113.4414499757,1.585)); +#143755 = DIRECTION('',(0.,0.,-1.)); +#143756 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#143757 = ORIENTED_EDGE('',*,*,#143758,.T.); +#143758 = EDGE_CURVE('',#143750,#143759,#143761,.T.); +#143759 = VERTEX_POINT('',#143760); +#143760 = CARTESIAN_POINT('',(187.635447,-113.357096,1.585)); +#143761 = LINE('',#143762,#143763); +#143762 = CARTESIAN_POINT('',(187.577386,-113.236649,1.585)); +#143763 = VECTOR('',#143764,1.); +#143764 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#143765 = ORIENTED_EDGE('',*,*,#143766,.T.); +#143766 = EDGE_CURVE('',#143759,#143767,#143769,.T.); +#143767 = VERTEX_POINT('',#143768); +#143768 = CARTESIAN_POINT('',(187.634225,-113.677252,1.585)); +#143769 = LINE('',#143770,#143771); +#143770 = CARTESIAN_POINT('',(187.635447,-113.357096,1.585)); +#143771 = VECTOR('',#143772,1.); +#143772 = DIRECTION('',(-3.816861463376E-03,-0.999992715758,0.)); +#143773 = ORIENTED_EDGE('',*,*,#143774,.T.); +#143774 = EDGE_CURVE('',#143767,#143775,#143777,.T.); +#143775 = VERTEX_POINT('',#143776); +#143776 = CARTESIAN_POINT('',(187.386044,-113.921478,1.585)); +#143777 = CIRCLE('',#143778,0.348635327447); +#143778 = AXIS2_PLACEMENT_3D('',#143779,#143780,#143781); +#143779 = CARTESIAN_POINT('',(187.29827248129,-113.5840720841,1.585)); +#143780 = DIRECTION('',(0.,0.,-1.)); +#143781 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#143782 = ORIENTED_EDGE('',*,*,#143783,.T.); +#143783 = EDGE_CURVE('',#143775,#143784,#143786,.T.); +#143784 = VERTEX_POINT('',#143785); +#143785 = CARTESIAN_POINT('',(187.208745,-113.920256,1.585)); +#143786 = LINE('',#143787,#143788); +#143787 = CARTESIAN_POINT('',(187.386044,-113.921478,1.585)); +#143788 = VECTOR('',#143789,1.); +#143789 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#143790 = ORIENTED_EDGE('',*,*,#143791,.T.); +#143791 = EDGE_CURVE('',#143784,#143792,#143794,.T.); +#143792 = VERTEX_POINT('',#143793); +#143793 = CARTESIAN_POINT('',(186.96452,-113.672074,1.585)); +#143794 = CIRCLE('',#143795,0.348628446661); +#143795 = AXIS2_PLACEMENT_3D('',#143796,#143797,#143798); +#143796 = CARTESIAN_POINT('',(187.30192061322,-113.5843094284,1.585)); +#143797 = DIRECTION('',(0.,0.,-1.)); +#143798 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#143799 = ORIENTED_EDGE('',*,*,#143800,.T.); +#143800 = EDGE_CURVE('',#143792,#143801,#143803,.T.); +#143801 = VERTEX_POINT('',#143802); +#143802 = CARTESIAN_POINT('',(186.965742,-113.351919,1.585)); +#143803 = LINE('',#143804,#143805); +#143804 = CARTESIAN_POINT('',(186.96452,-113.672074,1.585)); +#143805 = VECTOR('',#143806,1.); +#143806 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#143807 = ORIENTED_EDGE('',*,*,#143808,.T.); +#143808 = EDGE_CURVE('',#143801,#143809,#143811,.T.); +#143809 = VERTEX_POINT('',#143810); +#143810 = CARTESIAN_POINT('',(187.027946,-113.229206,1.585)); +#143811 = LINE('',#143812,#143813); +#143812 = CARTESIAN_POINT('',(186.965742,-113.351919,1.585)); +#143813 = VECTOR('',#143814,1.); +#143814 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#143815 = ORIENTED_EDGE('',*,*,#143816,.T.); +#143816 = EDGE_CURVE('',#143809,#143748,#143817,.T.); +#143817 = LINE('',#143818,#143819); +#143818 = CARTESIAN_POINT('',(187.027946,-113.229206,1.585)); +#143819 = VECTOR('',#143820,1.); +#143820 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#143821 = FACE_BOUND('',#143822,.F.); +#143822 = EDGE_LOOP('',(#143823,#143834,#143842,#143850,#143859,#143867, + #143876,#143884,#143892)); +#143823 = ORIENTED_EDGE('',*,*,#143824,.T.); +#143824 = EDGE_CURVE('',#143825,#143827,#143829,.T.); +#143825 = VERTEX_POINT('',#143826); +#143826 = CARTESIAN_POINT('',(187.422223,-113.29051,1.585)); +#143827 = VERTEX_POINT('',#143828); +#143828 = CARTESIAN_POINT('',(187.147337,-113.320917,1.585)); +#143829 = CIRCLE('',#143830,0.198386215365); +#143830 = AXIS2_PLACEMENT_3D('',#143831,#143832,#143833); +#143831 = CARTESIAN_POINT('',(187.30041995783,-113.4471021753,1.585)); +#143832 = DIRECTION('',(0.,0.,1.)); +#143833 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#143834 = ORIENTED_EDGE('',*,*,#143835,.T.); +#143835 = EDGE_CURVE('',#143827,#143836,#143838,.T.); +#143836 = VERTEX_POINT('',#143837); +#143837 = CARTESIAN_POINT('',(187.113079,-113.389433,1.585)); +#143838 = LINE('',#143839,#143840); +#143839 = CARTESIAN_POINT('',(187.147337,-113.320917,1.585)); +#143840 = VECTOR('',#143841,1.); +#143841 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#143842 = ORIENTED_EDGE('',*,*,#143843,.T.); +#143843 = EDGE_CURVE('',#143836,#143844,#143846,.T.); +#143844 = VERTEX_POINT('',#143845); +#143845 = CARTESIAN_POINT('',(187.113079,-113.639737,1.585)); +#143846 = LINE('',#143847,#143848); +#143847 = CARTESIAN_POINT('',(187.113079,-113.389433,1.585)); +#143848 = VECTOR('',#143849,1.); +#143849 = DIRECTION('',(0.,-1.,0.)); +#143850 = ORIENTED_EDGE('',*,*,#143851,.T.); +#143851 = EDGE_CURVE('',#143844,#143852,#143854,.T.); +#143852 = VERTEX_POINT('',#143853); +#143853 = CARTESIAN_POINT('',(187.24626,-113.772919,1.585)); +#143854 = CIRCLE('',#143855,0.186867373533); +#143855 = AXIS2_PLACEMENT_3D('',#143856,#143857,#143858); +#143856 = CARTESIAN_POINT('',(187.29379871388,-113.592199643,1.585)); +#143857 = DIRECTION('',(0.,0.,1.)); +#143858 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#143859 = ORIENTED_EDGE('',*,*,#143860,.T.); +#143860 = EDGE_CURVE('',#143852,#143861,#143863,.T.); +#143861 = VERTEX_POINT('',#143862); +#143862 = CARTESIAN_POINT('',(187.353707,-113.772919,1.585)); +#143863 = LINE('',#143864,#143865); +#143864 = CARTESIAN_POINT('',(187.24626,-113.772919,1.585)); +#143865 = VECTOR('',#143866,1.); +#143866 = DIRECTION('',(1.,0.,0.)); +#143867 = ORIENTED_EDGE('',*,*,#143868,.T.); +#143868 = EDGE_CURVE('',#143861,#143869,#143871,.T.); +#143869 = VERTEX_POINT('',#143870); +#143870 = CARTESIAN_POINT('',(187.486888,-113.639737,1.585)); +#143871 = CIRCLE('',#143872,0.186867760544); +#143872 = AXIS2_PLACEMENT_3D('',#143873,#143874,#143875); +#143873 = CARTESIAN_POINT('',(187.30616796928,-113.5921993262,1.585)); +#143874 = DIRECTION('',(0.,0.,1.)); +#143875 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#143876 = ORIENTED_EDGE('',*,*,#143877,.T.); +#143877 = EDGE_CURVE('',#143869,#143878,#143880,.T.); +#143878 = VERTEX_POINT('',#143879); +#143879 = CARTESIAN_POINT('',(187.486888,-113.389433,1.585)); +#143880 = LINE('',#143881,#143882); +#143881 = CARTESIAN_POINT('',(187.486888,-113.639737,1.585)); +#143882 = VECTOR('',#143883,1.); +#143883 = DIRECTION('',(0.,1.,0.)); +#143884 = ORIENTED_EDGE('',*,*,#143885,.T.); +#143885 = EDGE_CURVE('',#143878,#143886,#143888,.T.); +#143886 = VERTEX_POINT('',#143887); +#143887 = CARTESIAN_POINT('',(187.45263,-113.320917,1.585)); +#143888 = LINE('',#143889,#143890); +#143889 = CARTESIAN_POINT('',(187.486888,-113.389433,1.585)); +#143890 = VECTOR('',#143891,1.); +#143891 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#143892 = ORIENTED_EDGE('',*,*,#143893,.T.); +#143893 = EDGE_CURVE('',#143886,#143825,#143894,.T.); +#143894 = LINE('',#143895,#143896); +#143895 = CARTESIAN_POINT('',(187.45263,-113.320917,1.585)); +#143896 = VECTOR('',#143897,1.); +#143897 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#143898 = PLANE('',#143899); +#143899 = AXIS2_PLACEMENT_3D('',#143900,#143901,#143902); +#143900 = CARTESIAN_POINT('',(0.,0.,1.585)); +#143901 = DIRECTION('',(0.,0.,1.)); +#143902 = DIRECTION('',(1.,0.,-0.)); +#143903 = SHELL_BASED_SURFACE_MODEL('',(#143904)); +#143904 = OPEN_SHELL('',(#143905)); +#143905 = ADVANCED_FACE('',(#143906),#144123,.T.); +#143906 = FACE_BOUND('',#143907,.F.); +#143907 = EDGE_LOOP('',(#143908,#143919,#143927,#143935,#143943,#143952, + #143960,#143969,#143977,#143986,#143994,#144002,#144011,#144019, + #144027,#144036,#144044,#144052,#144060,#144068,#144076,#144084, + #144092,#144101,#144109,#144117)); +#143908 = ORIENTED_EDGE('',*,*,#143909,.T.); +#143909 = EDGE_CURVE('',#143910,#143912,#143914,.T.); +#143910 = VERTEX_POINT('',#143911); +#143911 = CARTESIAN_POINT('',(187.948792,-113.118892,1.585)); +#143912 = VERTEX_POINT('',#143913); +#143913 = CARTESIAN_POINT('',(188.051529,-113.138293,1.585)); +#143914 = CIRCLE('',#143915,7.440760172324E-02); +#143915 = AXIS2_PLACEMENT_3D('',#143916,#143917,#143918); +#143916 = CARTESIAN_POINT('',(187.99033506572,-113.180622583,1.585)); +#143917 = DIRECTION('',(0.,0.,-1.)); +#143918 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#143919 = ORIENTED_EDGE('',*,*,#143920,.T.); +#143920 = EDGE_CURVE('',#143912,#143921,#143923,.T.); +#143921 = VERTEX_POINT('',#143922); +#143922 = CARTESIAN_POINT('',(188.118685,-113.107693,1.585)); +#143923 = LINE('',#143924,#143925); +#143924 = CARTESIAN_POINT('',(188.051529,-113.138293,1.585)); +#143925 = VECTOR('',#143926,1.); +#143926 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#143927 = ORIENTED_EDGE('',*,*,#143928,.T.); +#143928 = EDGE_CURVE('',#143921,#143929,#143931,.T.); +#143929 = VERTEX_POINT('',#143930); +#143930 = CARTESIAN_POINT('',(188.290806,-113.107693,1.585)); +#143931 = LINE('',#143932,#143933); +#143932 = CARTESIAN_POINT('',(188.118685,-113.107693,1.585)); +#143933 = VECTOR('',#143934,1.); +#143934 = DIRECTION('',(1.,0.,0.)); +#143935 = ORIENTED_EDGE('',*,*,#143936,.T.); +#143936 = EDGE_CURVE('',#143929,#143937,#143939,.T.); +#143937 = VERTEX_POINT('',#143938); +#143938 = CARTESIAN_POINT('',(188.420666,-113.169621,1.585)); +#143939 = LINE('',#143940,#143941); +#143940 = CARTESIAN_POINT('',(188.290806,-113.107693,1.585)); +#143941 = VECTOR('',#143942,1.); +#143942 = DIRECTION('',(0.902617807283,-0.430442904431,0.)); +#143943 = ORIENTED_EDGE('',*,*,#143944,.T.); +#143944 = EDGE_CURVE('',#143937,#143945,#143947,.T.); +#143945 = VERTEX_POINT('',#143946); +#143946 = CARTESIAN_POINT('',(188.845967,-113.169621,1.585)); +#143947 = CIRCLE('',#143948,0.347106732746); +#143948 = AXIS2_PLACEMENT_3D('',#143949,#143950,#143951); +#143949 = CARTESIAN_POINT('',(188.6333165,-113.443961753,1.585)); +#143950 = DIRECTION('',(0.,0.,-1.)); +#143951 = DIRECTION('',(-0.612637209073,0.790364251506,0.)); +#143952 = ORIENTED_EDGE('',*,*,#143953,.T.); +#143953 = EDGE_CURVE('',#143945,#143954,#143956,.T.); +#143954 = VERTEX_POINT('',#143955); +#143955 = CARTESIAN_POINT('',(188.867066,-113.19533,1.585)); +#143956 = LINE('',#143957,#143958); +#143957 = CARTESIAN_POINT('',(188.845967,-113.169621,1.585)); +#143958 = VECTOR('',#143959,1.); +#143959 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#143960 = ORIENTED_EDGE('',*,*,#143961,.T.); +#143961 = EDGE_CURVE('',#143954,#143962,#143964,.T.); +#143962 = VERTEX_POINT('',#143963); +#143963 = CARTESIAN_POINT('',(188.909963,-113.889587,1.585)); +#143964 = CIRCLE('',#143965,0.780466291444); +#143965 = AXIS2_PLACEMENT_3D('',#143966,#143967,#143968); +#143966 = CARTESIAN_POINT('',(188.1911532213,-113.5855473082,1.585)); +#143967 = DIRECTION('',(0.,0.,-1.)); +#143968 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#143969 = ORIENTED_EDGE('',*,*,#143970,.T.); +#143970 = EDGE_CURVE('',#143962,#143971,#143973,.T.); +#143971 = VERTEX_POINT('',#143972); +#143972 = CARTESIAN_POINT('',(188.889271,-113.910279,1.585)); +#143973 = LINE('',#143974,#143975); +#143974 = CARTESIAN_POINT('',(188.909963,-113.889587,1.585)); +#143975 = VECTOR('',#143976,1.); +#143976 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#143977 = ORIENTED_EDGE('',*,*,#143978,.T.); +#143978 = EDGE_CURVE('',#143971,#143979,#143981,.T.); +#143979 = VERTEX_POINT('',#143980); +#143980 = CARTESIAN_POINT('',(188.772603,-113.847919,1.585)); +#143981 = CIRCLE('',#143982,7.499979580332E-02); +#143982 = AXIS2_PLACEMENT_3D('',#143983,#143984,#143985); +#143983 = CARTESIAN_POINT('',(188.8476027958,-113.8479193164,1.585)); +#143984 = DIRECTION('',(-0.,0.,-1.)); +#143985 = DIRECTION('',(0.555577568593,-0.831464710783,-0.)); +#143986 = ORIENTED_EDGE('',*,*,#143987,.T.); +#143987 = EDGE_CURVE('',#143979,#143988,#143990,.T.); +#143988 = VERTEX_POINT('',#143989); +#143989 = CARTESIAN_POINT('',(188.772603,-113.341814,1.585)); +#143990 = LINE('',#143991,#143992); +#143991 = CARTESIAN_POINT('',(188.772603,-113.847919,1.585)); +#143992 = VECTOR('',#143993,1.); +#143993 = DIRECTION('',(0.,1.,0.)); +#143994 = ORIENTED_EDGE('',*,*,#143995,.T.); +#143995 = EDGE_CURVE('',#143988,#143996,#143998,.T.); +#143996 = VERTEX_POINT('',#143997); +#143997 = CARTESIAN_POINT('',(188.744082,-113.284772,1.585)); +#143998 = LINE('',#143999,#144000); +#143999 = CARTESIAN_POINT('',(188.772603,-113.341814,1.585)); +#144000 = VECTOR('',#144001,1.); +#144001 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#144002 = ORIENTED_EDGE('',*,*,#144003,.T.); +#144003 = EDGE_CURVE('',#143996,#144004,#144006,.T.); +#144004 = VERTEX_POINT('',#144005); +#144005 = CARTESIAN_POINT('',(188.522551,-113.284772,1.585)); +#144006 = CIRCLE('',#144007,0.186653372204); +#144007 = AXIS2_PLACEMENT_3D('',#144008,#144009,#144010); +#144008 = CARTESIAN_POINT('',(188.6333165,-113.4350067674,1.585)); +#144009 = DIRECTION('',(0.,0.,1.)); +#144010 = DIRECTION('',(0.593428871348,0.804886435872,-0.)); +#144011 = ORIENTED_EDGE('',*,*,#144012,.T.); +#144012 = EDGE_CURVE('',#144004,#144013,#144015,.T.); +#144013 = VERTEX_POINT('',#144014); +#144014 = CARTESIAN_POINT('',(188.494031,-113.341814,1.585)); +#144015 = LINE('',#144016,#144017); +#144016 = CARTESIAN_POINT('',(188.522551,-113.284772,1.585)); +#144017 = VECTOR('',#144018,1.); +#144018 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#144019 = ORIENTED_EDGE('',*,*,#144020,.T.); +#144020 = EDGE_CURVE('',#144013,#144021,#144023,.T.); +#144021 = VERTEX_POINT('',#144022); +#144022 = CARTESIAN_POINT('',(188.49259,-113.862551,1.585)); +#144023 = LINE('',#144024,#144025); +#144024 = CARTESIAN_POINT('',(188.494031,-113.341814,1.585)); +#144025 = VECTOR('',#144026,1.); +#144026 = DIRECTION('',(-2.767221232121E-03,-0.999996171236,0.)); +#144027 = ORIENTED_EDGE('',*,*,#144028,.T.); +#144028 = EDGE_CURVE('',#144021,#144029,#144031,.T.); +#144029 = VERTEX_POINT('',#144030); +#144030 = CARTESIAN_POINT('',(188.344031,-113.847919,1.585)); +#144031 = CIRCLE('',#144032,7.500006711464E-02); +#144032 = AXIS2_PLACEMENT_3D('',#144033,#144034,#144035); +#144033 = CARTESIAN_POINT('',(188.41903106711,-113.8479190671,1.585)); +#144034 = DIRECTION('',(-0.,0.,-1.)); +#144035 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#144036 = ORIENTED_EDGE('',*,*,#144037,.T.); +#144037 = EDGE_CURVE('',#144029,#144038,#144040,.T.); +#144038 = VERTEX_POINT('',#144039); +#144039 = CARTESIAN_POINT('',(188.344031,-113.341814,1.585)); +#144040 = LINE('',#144041,#144042); +#144041 = CARTESIAN_POINT('',(188.344031,-113.847919,1.585)); +#144042 = VECTOR('',#144043,1.); +#144043 = DIRECTION('',(0.,1.,0.)); +#144044 = ORIENTED_EDGE('',*,*,#144045,.T.); +#144045 = EDGE_CURVE('',#144038,#144046,#144048,.T.); +#144046 = VERTEX_POINT('',#144047); +#144047 = CARTESIAN_POINT('',(188.31551,-113.284772,1.585)); +#144048 = LINE('',#144049,#144050); +#144049 = CARTESIAN_POINT('',(188.344031,-113.341814,1.585)); +#144050 = VECTOR('',#144051,1.); +#144051 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#144052 = ORIENTED_EDGE('',*,*,#144053,.T.); +#144053 = EDGE_CURVE('',#144046,#144054,#144056,.T.); +#144054 = VERTEX_POINT('',#144055); +#144055 = CARTESIAN_POINT('',(188.258469,-113.256252,1.585)); +#144056 = LINE('',#144057,#144058); +#144057 = CARTESIAN_POINT('',(188.31551,-113.284772,1.585)); +#144058 = VECTOR('',#144059,1.); +#144059 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#144060 = ORIENTED_EDGE('',*,*,#144061,.T.); +#144061 = EDGE_CURVE('',#144054,#144062,#144064,.T.); +#144062 = VERTEX_POINT('',#144063); +#144063 = CARTESIAN_POINT('',(188.151022,-113.256252,1.585)); +#144064 = LINE('',#144065,#144066); +#144065 = CARTESIAN_POINT('',(188.258469,-113.256252,1.585)); +#144066 = VECTOR('',#144067,1.); +#144067 = DIRECTION('',(-1.,0.,0.)); +#144068 = ORIENTED_EDGE('',*,*,#144069,.T.); +#144069 = EDGE_CURVE('',#144062,#144070,#144072,.T.); +#144070 = VERTEX_POINT('',#144071); +#144071 = CARTESIAN_POINT('',(188.082506,-113.29051,1.585)); +#144072 = LINE('',#144073,#144074); +#144073 = CARTESIAN_POINT('',(188.151022,-113.256252,1.585)); +#144074 = VECTOR('',#144075,1.); +#144075 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#144076 = ORIENTED_EDGE('',*,*,#144077,.T.); +#144077 = EDGE_CURVE('',#144070,#144078,#144080,.T.); +#144078 = VERTEX_POINT('',#144079); +#144079 = CARTESIAN_POINT('',(188.06546,-113.307556,1.585)); +#144080 = LINE('',#144081,#144082); +#144081 = CARTESIAN_POINT('',(188.082506,-113.29051,1.585)); +#144082 = VECTOR('',#144083,1.); +#144083 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#144084 = ORIENTED_EDGE('',*,*,#144085,.T.); +#144085 = EDGE_CURVE('',#144078,#144086,#144088,.T.); +#144086 = VERTEX_POINT('',#144087); +#144087 = CARTESIAN_POINT('',(188.064019,-113.862551,1.585)); +#144088 = LINE('',#144089,#144090); +#144089 = CARTESIAN_POINT('',(188.06546,-113.307556,1.585)); +#144090 = VECTOR('',#144091,1.); +#144091 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#144092 = ORIENTED_EDGE('',*,*,#144093,.T.); +#144093 = EDGE_CURVE('',#144086,#144094,#144096,.T.); +#144094 = VERTEX_POINT('',#144095); +#144095 = CARTESIAN_POINT('',(187.91546,-113.847919,1.585)); +#144096 = CIRCLE('',#144097,7.500006711464E-02); +#144097 = AXIS2_PLACEMENT_3D('',#144098,#144099,#144100); +#144098 = CARTESIAN_POINT('',(187.99046006711,-113.8479190671,1.585)); +#144099 = DIRECTION('',(-0.,0.,-1.)); +#144100 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#144101 = ORIENTED_EDGE('',*,*,#144102,.T.); +#144102 = EDGE_CURVE('',#144094,#144103,#144105,.T.); +#144103 = VERTEX_POINT('',#144104); +#144104 = CARTESIAN_POINT('',(187.916901,-113.16662,1.585)); +#144105 = LINE('',#144106,#144107); +#144106 = CARTESIAN_POINT('',(187.91546,-113.847919,1.585)); +#144107 = VECTOR('',#144108,1.); +#144108 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#144109 = ORIENTED_EDGE('',*,*,#144110,.T.); +#144110 = EDGE_CURVE('',#144103,#144111,#144113,.T.); +#144111 = VERTEX_POINT('',#144112); +#144112 = CARTESIAN_POINT('',(187.9281,-113.139584,1.585)); +#144113 = LINE('',#144114,#144115); +#144114 = CARTESIAN_POINT('',(187.916901,-113.16662,1.585)); +#144115 = VECTOR('',#144116,1.); +#144116 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#144117 = ORIENTED_EDGE('',*,*,#144118,.T.); +#144118 = EDGE_CURVE('',#144111,#143910,#144119,.T.); +#144119 = LINE('',#144120,#144121); +#144120 = CARTESIAN_POINT('',(187.9281,-113.139584,1.585)); +#144121 = VECTOR('',#144122,1.); +#144122 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#144123 = PLANE('',#144124); +#144124 = AXIS2_PLACEMENT_3D('',#144125,#144126,#144127); +#144125 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144126 = DIRECTION('',(0.,0.,1.)); +#144127 = DIRECTION('',(1.,0.,-0.)); +#144128 = SHELL_BASED_SURFACE_MODEL('',(#144129)); +#144129 = OPEN_SHELL('',(#144130)); +#144130 = ADVANCED_FACE('',(#144131),#144167,.T.); +#144131 = FACE_BOUND('',#144132,.F.); +#144132 = EDGE_LOOP('',(#144133,#144144,#144152,#144161)); +#144133 = ORIENTED_EDGE('',*,*,#144134,.T.); +#144134 = EDGE_CURVE('',#144135,#144137,#144139,.T.); +#144135 = VERTEX_POINT('',#144136); +#144136 = CARTESIAN_POINT('',(92.004392,-112.9056,1.585)); +#144137 = VERTEX_POINT('',#144138); +#144138 = CARTESIAN_POINT('',(92.004392,-112.7856,1.585)); +#144139 = CIRCLE('',#144140,6.000000000043E-02); +#144140 = AXIS2_PLACEMENT_3D('',#144141,#144142,#144143); +#144141 = CARTESIAN_POINT('',(92.004391774412,-112.8456,1.585)); +#144142 = DIRECTION('',(0.,0.,-1.)); +#144143 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144144 = ORIENTED_EDGE('',*,*,#144145,.T.); +#144145 = EDGE_CURVE('',#144137,#144146,#144148,.T.); +#144146 = VERTEX_POINT('',#144147); +#144147 = CARTESIAN_POINT('',(92.478908,-112.7856,1.585)); +#144148 = LINE('',#144149,#144150); +#144149 = CARTESIAN_POINT('',(92.004392,-112.7856,1.585)); +#144150 = VECTOR('',#144151,1.); +#144151 = DIRECTION('',(1.,0.,0.)); +#144152 = ORIENTED_EDGE('',*,*,#144153,.T.); +#144153 = EDGE_CURVE('',#144146,#144154,#144156,.T.); +#144154 = VERTEX_POINT('',#144155); +#144155 = CARTESIAN_POINT('',(92.478908,-112.9056,1.585)); +#144156 = CIRCLE('',#144157,6.000000000043E-02); +#144157 = AXIS2_PLACEMENT_3D('',#144158,#144159,#144160); +#144158 = CARTESIAN_POINT('',(92.478908225588,-112.8456,1.585)); +#144159 = DIRECTION('',(0.,0.,-1.)); +#144160 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144161 = ORIENTED_EDGE('',*,*,#144162,.T.); +#144162 = EDGE_CURVE('',#144154,#144135,#144163,.T.); +#144163 = LINE('',#144164,#144165); +#144164 = CARTESIAN_POINT('',(92.478908,-112.9056,1.585)); +#144165 = VECTOR('',#144166,1.); +#144166 = DIRECTION('',(-1.,0.,0.)); +#144167 = PLANE('',#144168); +#144168 = AXIS2_PLACEMENT_3D('',#144169,#144170,#144171); +#144169 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144170 = DIRECTION('',(0.,0.,1.)); +#144171 = DIRECTION('',(1.,0.,-0.)); +#144172 = SHELL_BASED_SURFACE_MODEL('',(#144173)); +#144173 = OPEN_SHELL('',(#144174)); +#144174 = ADVANCED_FACE('',(#144175),#144211,.T.); +#144175 = FACE_BOUND('',#144176,.F.); +#144176 = EDGE_LOOP('',(#144177,#144188,#144196,#144205)); +#144177 = ORIENTED_EDGE('',*,*,#144178,.T.); +#144178 = EDGE_CURVE('',#144179,#144181,#144183,.T.); +#144179 = VERTEX_POINT('',#144180); +#144180 = CARTESIAN_POINT('',(95.179392,-112.9056,1.585)); +#144181 = VERTEX_POINT('',#144182); +#144182 = CARTESIAN_POINT('',(95.179392,-112.7856,1.585)); +#144183 = CIRCLE('',#144184,6.000000000043E-02); +#144184 = AXIS2_PLACEMENT_3D('',#144185,#144186,#144187); +#144185 = CARTESIAN_POINT('',(95.179391774412,-112.8456,1.585)); +#144186 = DIRECTION('',(0.,0.,-1.)); +#144187 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144188 = ORIENTED_EDGE('',*,*,#144189,.T.); +#144189 = EDGE_CURVE('',#144181,#144190,#144192,.T.); +#144190 = VERTEX_POINT('',#144191); +#144191 = CARTESIAN_POINT('',(95.653908,-112.7856,1.585)); +#144192 = LINE('',#144193,#144194); +#144193 = CARTESIAN_POINT('',(95.179392,-112.7856,1.585)); +#144194 = VECTOR('',#144195,1.); +#144195 = DIRECTION('',(1.,0.,0.)); +#144196 = ORIENTED_EDGE('',*,*,#144197,.T.); +#144197 = EDGE_CURVE('',#144190,#144198,#144200,.T.); +#144198 = VERTEX_POINT('',#144199); +#144199 = CARTESIAN_POINT('',(95.653908,-112.9056,1.585)); +#144200 = CIRCLE('',#144201,6.000000000043E-02); +#144201 = AXIS2_PLACEMENT_3D('',#144202,#144203,#144204); +#144202 = CARTESIAN_POINT('',(95.653908225588,-112.8456,1.585)); +#144203 = DIRECTION('',(0.,0.,-1.)); +#144204 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144205 = ORIENTED_EDGE('',*,*,#144206,.T.); +#144206 = EDGE_CURVE('',#144198,#144179,#144207,.T.); +#144207 = LINE('',#144208,#144209); +#144208 = CARTESIAN_POINT('',(95.653908,-112.9056,1.585)); +#144209 = VECTOR('',#144210,1.); +#144210 = DIRECTION('',(-1.,0.,0.)); +#144211 = PLANE('',#144212); +#144212 = AXIS2_PLACEMENT_3D('',#144213,#144214,#144215); +#144213 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144214 = DIRECTION('',(0.,0.,1.)); +#144215 = DIRECTION('',(1.,0.,-0.)); +#144216 = SHELL_BASED_SURFACE_MODEL('',(#144217)); +#144217 = OPEN_SHELL('',(#144218)); +#144218 = ADVANCED_FACE('',(#144219),#144255,.T.); +#144219 = FACE_BOUND('',#144220,.F.); +#144220 = EDGE_LOOP('',(#144221,#144232,#144240,#144249)); +#144221 = ORIENTED_EDGE('',*,*,#144222,.T.); +#144222 = EDGE_CURVE('',#144223,#144225,#144227,.T.); +#144223 = VERTEX_POINT('',#144224); +#144224 = CARTESIAN_POINT('',(98.504392,-112.9056,1.585)); +#144225 = VERTEX_POINT('',#144226); +#144226 = CARTESIAN_POINT('',(98.504392,-112.7856,1.585)); +#144227 = CIRCLE('',#144228,6.000000000043E-02); +#144228 = AXIS2_PLACEMENT_3D('',#144229,#144230,#144231); +#144229 = CARTESIAN_POINT('',(98.504391774412,-112.8456,1.585)); +#144230 = DIRECTION('',(0.,0.,-1.)); +#144231 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144232 = ORIENTED_EDGE('',*,*,#144233,.T.); +#144233 = EDGE_CURVE('',#144225,#144234,#144236,.T.); +#144234 = VERTEX_POINT('',#144235); +#144235 = CARTESIAN_POINT('',(98.978908,-112.7856,1.585)); +#144236 = LINE('',#144237,#144238); +#144237 = CARTESIAN_POINT('',(98.504392,-112.7856,1.585)); +#144238 = VECTOR('',#144239,1.); +#144239 = DIRECTION('',(1.,0.,0.)); +#144240 = ORIENTED_EDGE('',*,*,#144241,.T.); +#144241 = EDGE_CURVE('',#144234,#144242,#144244,.T.); +#144242 = VERTEX_POINT('',#144243); +#144243 = CARTESIAN_POINT('',(98.978908,-112.9056,1.585)); +#144244 = CIRCLE('',#144245,6.000000000043E-02); +#144245 = AXIS2_PLACEMENT_3D('',#144246,#144247,#144248); +#144246 = CARTESIAN_POINT('',(98.978908225588,-112.8456,1.585)); +#144247 = DIRECTION('',(0.,0.,-1.)); +#144248 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144249 = ORIENTED_EDGE('',*,*,#144250,.T.); +#144250 = EDGE_CURVE('',#144242,#144223,#144251,.T.); +#144251 = LINE('',#144252,#144253); +#144252 = CARTESIAN_POINT('',(98.978908,-112.9056,1.585)); +#144253 = VECTOR('',#144254,1.); +#144254 = DIRECTION('',(-1.,0.,0.)); +#144255 = PLANE('',#144256); +#144256 = AXIS2_PLACEMENT_3D('',#144257,#144258,#144259); +#144257 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144258 = DIRECTION('',(0.,0.,1.)); +#144259 = DIRECTION('',(1.,0.,-0.)); +#144260 = SHELL_BASED_SURFACE_MODEL('',(#144261)); +#144261 = OPEN_SHELL('',(#144262)); +#144262 = ADVANCED_FACE('',(#144263),#144299,.T.); +#144263 = FACE_BOUND('',#144264,.F.); +#144264 = EDGE_LOOP('',(#144265,#144276,#144284,#144293)); +#144265 = ORIENTED_EDGE('',*,*,#144266,.T.); +#144266 = EDGE_CURVE('',#144267,#144269,#144271,.T.); +#144267 = VERTEX_POINT('',#144268); +#144268 = CARTESIAN_POINT('',(102.679392,-112.9056,1.585)); +#144269 = VERTEX_POINT('',#144270); +#144270 = CARTESIAN_POINT('',(102.679392,-112.7856,1.585)); +#144271 = CIRCLE('',#144272,6.000000000043E-02); +#144272 = AXIS2_PLACEMENT_3D('',#144273,#144274,#144275); +#144273 = CARTESIAN_POINT('',(102.67939177441,-112.8456,1.585)); +#144274 = DIRECTION('',(0.,0.,-1.)); +#144275 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144276 = ORIENTED_EDGE('',*,*,#144277,.T.); +#144277 = EDGE_CURVE('',#144269,#144278,#144280,.T.); +#144278 = VERTEX_POINT('',#144279); +#144279 = CARTESIAN_POINT('',(103.153908,-112.7856,1.585)); +#144280 = LINE('',#144281,#144282); +#144281 = CARTESIAN_POINT('',(102.679392,-112.7856,1.585)); +#144282 = VECTOR('',#144283,1.); +#144283 = DIRECTION('',(1.,0.,0.)); +#144284 = ORIENTED_EDGE('',*,*,#144285,.T.); +#144285 = EDGE_CURVE('',#144278,#144286,#144288,.T.); +#144286 = VERTEX_POINT('',#144287); +#144287 = CARTESIAN_POINT('',(103.153908,-112.9056,1.585)); +#144288 = CIRCLE('',#144289,6.000000000043E-02); +#144289 = AXIS2_PLACEMENT_3D('',#144290,#144291,#144292); +#144290 = CARTESIAN_POINT('',(103.15390822558,-112.8456,1.585)); +#144291 = DIRECTION('',(0.,0.,-1.)); +#144292 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144293 = ORIENTED_EDGE('',*,*,#144294,.T.); +#144294 = EDGE_CURVE('',#144286,#144267,#144295,.T.); +#144295 = LINE('',#144296,#144297); +#144296 = CARTESIAN_POINT('',(103.153908,-112.9056,1.585)); +#144297 = VECTOR('',#144298,1.); +#144298 = DIRECTION('',(-1.,0.,0.)); +#144299 = PLANE('',#144300); +#144300 = AXIS2_PLACEMENT_3D('',#144301,#144302,#144303); +#144301 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144302 = DIRECTION('',(0.,0.,1.)); +#144303 = DIRECTION('',(1.,0.,-0.)); +#144304 = SHELL_BASED_SURFACE_MODEL('',(#144305)); +#144305 = OPEN_SHELL('',(#144306)); +#144306 = ADVANCED_FACE('',(#144307),#144343,.T.); +#144307 = FACE_BOUND('',#144308,.F.); +#144308 = EDGE_LOOP('',(#144309,#144320,#144328,#144337)); +#144309 = ORIENTED_EDGE('',*,*,#144310,.T.); +#144310 = EDGE_CURVE('',#144311,#144313,#144315,.T.); +#144311 = VERTEX_POINT('',#144312); +#144312 = CARTESIAN_POINT('',(106.679392,-112.9056,1.585)); +#144313 = VERTEX_POINT('',#144314); +#144314 = CARTESIAN_POINT('',(106.679392,-112.7856,1.585)); +#144315 = CIRCLE('',#144316,6.000000000043E-02); +#144316 = AXIS2_PLACEMENT_3D('',#144317,#144318,#144319); +#144317 = CARTESIAN_POINT('',(106.67939177441,-112.8456,1.585)); +#144318 = DIRECTION('',(0.,0.,-1.)); +#144319 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144320 = ORIENTED_EDGE('',*,*,#144321,.T.); +#144321 = EDGE_CURVE('',#144313,#144322,#144324,.T.); +#144322 = VERTEX_POINT('',#144323); +#144323 = CARTESIAN_POINT('',(107.153908,-112.7856,1.585)); +#144324 = LINE('',#144325,#144326); +#144325 = CARTESIAN_POINT('',(106.679392,-112.7856,1.585)); +#144326 = VECTOR('',#144327,1.); +#144327 = DIRECTION('',(1.,0.,0.)); +#144328 = ORIENTED_EDGE('',*,*,#144329,.T.); +#144329 = EDGE_CURVE('',#144322,#144330,#144332,.T.); +#144330 = VERTEX_POINT('',#144331); +#144331 = CARTESIAN_POINT('',(107.153908,-112.9056,1.585)); +#144332 = CIRCLE('',#144333,6.000000000043E-02); +#144333 = AXIS2_PLACEMENT_3D('',#144334,#144335,#144336); +#144334 = CARTESIAN_POINT('',(107.15390822558,-112.8456,1.585)); +#144335 = DIRECTION('',(0.,0.,-1.)); +#144336 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144337 = ORIENTED_EDGE('',*,*,#144338,.T.); +#144338 = EDGE_CURVE('',#144330,#144311,#144339,.T.); +#144339 = LINE('',#144340,#144341); +#144340 = CARTESIAN_POINT('',(107.153908,-112.9056,1.585)); +#144341 = VECTOR('',#144342,1.); +#144342 = DIRECTION('',(-1.,0.,0.)); +#144343 = PLANE('',#144344); +#144344 = AXIS2_PLACEMENT_3D('',#144345,#144346,#144347); +#144345 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144346 = DIRECTION('',(0.,0.,1.)); +#144347 = DIRECTION('',(1.,0.,-0.)); +#144348 = SHELL_BASED_SURFACE_MODEL('',(#144349)); +#144349 = OPEN_SHELL('',(#144350)); +#144350 = ADVANCED_FACE('',(#144351),#144387,.T.); +#144351 = FACE_BOUND('',#144352,.F.); +#144352 = EDGE_LOOP('',(#144353,#144364,#144372,#144381)); +#144353 = ORIENTED_EDGE('',*,*,#144354,.T.); +#144354 = EDGE_CURVE('',#144355,#144357,#144359,.T.); +#144355 = VERTEX_POINT('',#144356); +#144356 = CARTESIAN_POINT('',(110.679392,-112.9056,1.585)); +#144357 = VERTEX_POINT('',#144358); +#144358 = CARTESIAN_POINT('',(110.679392,-112.7856,1.585)); +#144359 = CIRCLE('',#144360,6.000000000043E-02); +#144360 = AXIS2_PLACEMENT_3D('',#144361,#144362,#144363); +#144361 = CARTESIAN_POINT('',(110.67939177441,-112.8456,1.585)); +#144362 = DIRECTION('',(0.,0.,-1.)); +#144363 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144364 = ORIENTED_EDGE('',*,*,#144365,.T.); +#144365 = EDGE_CURVE('',#144357,#144366,#144368,.T.); +#144366 = VERTEX_POINT('',#144367); +#144367 = CARTESIAN_POINT('',(111.153908,-112.7856,1.585)); +#144368 = LINE('',#144369,#144370); +#144369 = CARTESIAN_POINT('',(110.679392,-112.7856,1.585)); +#144370 = VECTOR('',#144371,1.); +#144371 = DIRECTION('',(1.,0.,0.)); +#144372 = ORIENTED_EDGE('',*,*,#144373,.T.); +#144373 = EDGE_CURVE('',#144366,#144374,#144376,.T.); +#144374 = VERTEX_POINT('',#144375); +#144375 = CARTESIAN_POINT('',(111.153908,-112.9056,1.585)); +#144376 = CIRCLE('',#144377,6.000000000043E-02); +#144377 = AXIS2_PLACEMENT_3D('',#144378,#144379,#144380); +#144378 = CARTESIAN_POINT('',(111.15390822558,-112.8456,1.585)); +#144379 = DIRECTION('',(0.,0.,-1.)); +#144380 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144381 = ORIENTED_EDGE('',*,*,#144382,.T.); +#144382 = EDGE_CURVE('',#144374,#144355,#144383,.T.); +#144383 = LINE('',#144384,#144385); +#144384 = CARTESIAN_POINT('',(111.153908,-112.9056,1.585)); +#144385 = VECTOR('',#144386,1.); +#144386 = DIRECTION('',(-1.,0.,0.)); +#144387 = PLANE('',#144388); +#144388 = AXIS2_PLACEMENT_3D('',#144389,#144390,#144391); +#144389 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144390 = DIRECTION('',(0.,0.,1.)); +#144391 = DIRECTION('',(1.,0.,-0.)); +#144392 = SHELL_BASED_SURFACE_MODEL('',(#144393)); +#144393 = OPEN_SHELL('',(#144394)); +#144394 = ADVANCED_FACE('',(#144395),#144431,.T.); +#144395 = FACE_BOUND('',#144396,.F.); +#144396 = EDGE_LOOP('',(#144397,#144408,#144416,#144425)); +#144397 = ORIENTED_EDGE('',*,*,#144398,.T.); +#144398 = EDGE_CURVE('',#144399,#144401,#144403,.T.); +#144399 = VERTEX_POINT('',#144400); +#144400 = CARTESIAN_POINT('',(114.679392,-112.9056,1.585)); +#144401 = VERTEX_POINT('',#144402); +#144402 = CARTESIAN_POINT('',(114.679392,-112.7856,1.585)); +#144403 = CIRCLE('',#144404,6.000000000043E-02); +#144404 = AXIS2_PLACEMENT_3D('',#144405,#144406,#144407); +#144405 = CARTESIAN_POINT('',(114.67939177441,-112.8456,1.585)); +#144406 = DIRECTION('',(0.,0.,-1.)); +#144407 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144408 = ORIENTED_EDGE('',*,*,#144409,.T.); +#144409 = EDGE_CURVE('',#144401,#144410,#144412,.T.); +#144410 = VERTEX_POINT('',#144411); +#144411 = CARTESIAN_POINT('',(115.153908,-112.7856,1.585)); +#144412 = LINE('',#144413,#144414); +#144413 = CARTESIAN_POINT('',(114.679392,-112.7856,1.585)); +#144414 = VECTOR('',#144415,1.); +#144415 = DIRECTION('',(1.,0.,0.)); +#144416 = ORIENTED_EDGE('',*,*,#144417,.T.); +#144417 = EDGE_CURVE('',#144410,#144418,#144420,.T.); +#144418 = VERTEX_POINT('',#144419); +#144419 = CARTESIAN_POINT('',(115.153908,-112.9056,1.585)); +#144420 = CIRCLE('',#144421,6.000000000043E-02); +#144421 = AXIS2_PLACEMENT_3D('',#144422,#144423,#144424); +#144422 = CARTESIAN_POINT('',(115.15390822558,-112.8456,1.585)); +#144423 = DIRECTION('',(0.,0.,-1.)); +#144424 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144425 = ORIENTED_EDGE('',*,*,#144426,.T.); +#144426 = EDGE_CURVE('',#144418,#144399,#144427,.T.); +#144427 = LINE('',#144428,#144429); +#144428 = CARTESIAN_POINT('',(115.153908,-112.9056,1.585)); +#144429 = VECTOR('',#144430,1.); +#144430 = DIRECTION('',(-1.,0.,0.)); +#144431 = PLANE('',#144432); +#144432 = AXIS2_PLACEMENT_3D('',#144433,#144434,#144435); +#144433 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144434 = DIRECTION('',(0.,0.,1.)); +#144435 = DIRECTION('',(1.,0.,-0.)); +#144436 = SHELL_BASED_SURFACE_MODEL('',(#144437)); +#144437 = OPEN_SHELL('',(#144438)); +#144438 = ADVANCED_FACE('',(#144439),#144475,.T.); +#144439 = FACE_BOUND('',#144440,.F.); +#144440 = EDGE_LOOP('',(#144441,#144452,#144460,#144469)); +#144441 = ORIENTED_EDGE('',*,*,#144442,.T.); +#144442 = EDGE_CURVE('',#144443,#144445,#144447,.T.); +#144443 = VERTEX_POINT('',#144444); +#144444 = CARTESIAN_POINT('',(124.679392,-112.9056,1.585)); +#144445 = VERTEX_POINT('',#144446); +#144446 = CARTESIAN_POINT('',(124.679392,-112.7856,1.585)); +#144447 = CIRCLE('',#144448,6.000000000043E-02); +#144448 = AXIS2_PLACEMENT_3D('',#144449,#144450,#144451); +#144449 = CARTESIAN_POINT('',(124.67939177441,-112.8456,1.585)); +#144450 = DIRECTION('',(0.,0.,-1.)); +#144451 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#144452 = ORIENTED_EDGE('',*,*,#144453,.T.); +#144453 = EDGE_CURVE('',#144445,#144454,#144456,.T.); +#144454 = VERTEX_POINT('',#144455); +#144455 = CARTESIAN_POINT('',(125.153908,-112.7856,1.585)); +#144456 = LINE('',#144457,#144458); +#144457 = CARTESIAN_POINT('',(124.679392,-112.7856,1.585)); +#144458 = VECTOR('',#144459,1.); +#144459 = DIRECTION('',(1.,0.,0.)); +#144460 = ORIENTED_EDGE('',*,*,#144461,.T.); +#144461 = EDGE_CURVE('',#144454,#144462,#144464,.T.); +#144462 = VERTEX_POINT('',#144463); +#144463 = CARTESIAN_POINT('',(125.153908,-112.9056,1.585)); +#144464 = CIRCLE('',#144465,6.000000000043E-02); +#144465 = AXIS2_PLACEMENT_3D('',#144466,#144467,#144468); +#144466 = CARTESIAN_POINT('',(125.15390822558,-112.8456,1.585)); +#144467 = DIRECTION('',(0.,0.,-1.)); +#144468 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144469 = ORIENTED_EDGE('',*,*,#144470,.T.); +#144470 = EDGE_CURVE('',#144462,#144443,#144471,.T.); +#144471 = LINE('',#144472,#144473); +#144472 = CARTESIAN_POINT('',(125.153908,-112.9056,1.585)); +#144473 = VECTOR('',#144474,1.); +#144474 = DIRECTION('',(-1.,0.,0.)); +#144475 = PLANE('',#144476); +#144476 = AXIS2_PLACEMENT_3D('',#144477,#144478,#144479); +#144477 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144478 = DIRECTION('',(0.,0.,1.)); +#144479 = DIRECTION('',(1.,0.,-0.)); +#144480 = SHELL_BASED_SURFACE_MODEL('',(#144481)); +#144481 = OPEN_SHELL('',(#144482)); +#144482 = ADVANCED_FACE('',(#144483),#144519,.T.); +#144483 = FACE_BOUND('',#144484,.F.); +#144484 = EDGE_LOOP('',(#144485,#144496,#144504,#144513)); +#144485 = ORIENTED_EDGE('',*,*,#144486,.T.); +#144486 = EDGE_CURVE('',#144487,#144489,#144491,.T.); +#144487 = VERTEX_POINT('',#144488); +#144488 = CARTESIAN_POINT('',(128.679392,-112.9056,1.585)); +#144489 = VERTEX_POINT('',#144490); +#144490 = CARTESIAN_POINT('',(128.679392,-112.7856,1.585)); +#144491 = CIRCLE('',#144492,6.000000000043E-02); +#144492 = AXIS2_PLACEMENT_3D('',#144493,#144494,#144495); +#144493 = CARTESIAN_POINT('',(128.67939177441,-112.8456,1.585)); +#144494 = DIRECTION('',(0.,0.,-1.)); +#144495 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#144496 = ORIENTED_EDGE('',*,*,#144497,.T.); +#144497 = EDGE_CURVE('',#144489,#144498,#144500,.T.); +#144498 = VERTEX_POINT('',#144499); +#144499 = CARTESIAN_POINT('',(129.153908,-112.7856,1.585)); +#144500 = LINE('',#144501,#144502); +#144501 = CARTESIAN_POINT('',(128.679392,-112.7856,1.585)); +#144502 = VECTOR('',#144503,1.); +#144503 = DIRECTION('',(1.,0.,0.)); +#144504 = ORIENTED_EDGE('',*,*,#144505,.T.); +#144505 = EDGE_CURVE('',#144498,#144506,#144508,.T.); +#144506 = VERTEX_POINT('',#144507); +#144507 = CARTESIAN_POINT('',(129.153908,-112.9056,1.585)); +#144508 = CIRCLE('',#144509,6.000000000042E-02); +#144509 = AXIS2_PLACEMENT_3D('',#144510,#144511,#144512); +#144510 = CARTESIAN_POINT('',(129.15390822558,-112.8456,1.585)); +#144511 = DIRECTION('',(0.,0.,-1.)); +#144512 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#144513 = ORIENTED_EDGE('',*,*,#144514,.T.); +#144514 = EDGE_CURVE('',#144506,#144487,#144515,.T.); +#144515 = LINE('',#144516,#144517); +#144516 = CARTESIAN_POINT('',(129.153908,-112.9056,1.585)); +#144517 = VECTOR('',#144518,1.); +#144518 = DIRECTION('',(-1.,0.,0.)); +#144519 = PLANE('',#144520); +#144520 = AXIS2_PLACEMENT_3D('',#144521,#144522,#144523); +#144521 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144522 = DIRECTION('',(0.,0.,1.)); +#144523 = DIRECTION('',(1.,0.,-0.)); +#144524 = SHELL_BASED_SURFACE_MODEL('',(#144525)); +#144525 = OPEN_SHELL('',(#144526)); +#144526 = ADVANCED_FACE('',(#144527),#144563,.T.); +#144527 = FACE_BOUND('',#144528,.F.); +#144528 = EDGE_LOOP('',(#144529,#144540,#144548,#144557)); +#144529 = ORIENTED_EDGE('',*,*,#144530,.T.); +#144530 = EDGE_CURVE('',#144531,#144533,#144535,.T.); +#144531 = VERTEX_POINT('',#144532); +#144532 = CARTESIAN_POINT('',(118.77607,-112.8931,1.585)); +#144533 = VERTEX_POINT('',#144534); +#144534 = CARTESIAN_POINT('',(118.77607,-112.7731,1.585)); +#144535 = CIRCLE('',#144536,6.000000000043E-02); +#144536 = AXIS2_PLACEMENT_3D('',#144537,#144538,#144539); +#144537 = CARTESIAN_POINT('',(118.77606977441,-112.8331,1.585)); +#144538 = DIRECTION('',(0.,0.,-1.)); +#144539 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#144540 = ORIENTED_EDGE('',*,*,#144541,.T.); +#144541 = EDGE_CURVE('',#144533,#144542,#144544,.T.); +#144542 = VERTEX_POINT('',#144543); +#144543 = CARTESIAN_POINT('',(119.05723,-112.7731,1.585)); +#144544 = LINE('',#144545,#144546); +#144545 = CARTESIAN_POINT('',(118.77607,-112.7731,1.585)); +#144546 = VECTOR('',#144547,1.); +#144547 = DIRECTION('',(1.,0.,0.)); +#144548 = ORIENTED_EDGE('',*,*,#144549,.T.); +#144549 = EDGE_CURVE('',#144542,#144550,#144552,.T.); +#144550 = VERTEX_POINT('',#144551); +#144551 = CARTESIAN_POINT('',(119.05723,-112.8931,1.585)); +#144552 = CIRCLE('',#144553,6.000000000042E-02); +#144553 = AXIS2_PLACEMENT_3D('',#144554,#144555,#144556); +#144554 = CARTESIAN_POINT('',(119.05723022558,-112.8331,1.585)); +#144555 = DIRECTION('',(0.,0.,-1.)); +#144556 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144557 = ORIENTED_EDGE('',*,*,#144558,.T.); +#144558 = EDGE_CURVE('',#144550,#144531,#144559,.T.); +#144559 = LINE('',#144560,#144561); +#144560 = CARTESIAN_POINT('',(119.05723,-112.8931,1.585)); +#144561 = VECTOR('',#144562,1.); +#144562 = DIRECTION('',(-1.,0.,0.)); +#144563 = PLANE('',#144564); +#144564 = AXIS2_PLACEMENT_3D('',#144565,#144566,#144567); +#144565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144566 = DIRECTION('',(0.,0.,1.)); +#144567 = DIRECTION('',(1.,0.,-0.)); +#144568 = SHELL_BASED_SURFACE_MODEL('',(#144569)); +#144569 = OPEN_SHELL('',(#144570)); +#144570 = ADVANCED_FACE('',(#144571),#144607,.T.); +#144571 = FACE_BOUND('',#144572,.F.); +#144572 = EDGE_LOOP('',(#144573,#144584,#144592,#144601)); +#144573 = ORIENTED_EDGE('',*,*,#144574,.T.); +#144574 = EDGE_CURVE('',#144575,#144577,#144579,.T.); +#144575 = VERTEX_POINT('',#144576); +#144576 = CARTESIAN_POINT('',(132.77607,-112.8931,1.585)); +#144577 = VERTEX_POINT('',#144578); +#144578 = CARTESIAN_POINT('',(132.77607,-112.7731,1.585)); +#144579 = CIRCLE('',#144580,6.000000000043E-02); +#144580 = AXIS2_PLACEMENT_3D('',#144581,#144582,#144583); +#144581 = CARTESIAN_POINT('',(132.77606977441,-112.8331,1.585)); +#144582 = DIRECTION('',(0.,0.,-1.)); +#144583 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#144584 = ORIENTED_EDGE('',*,*,#144585,.T.); +#144585 = EDGE_CURVE('',#144577,#144586,#144588,.T.); +#144586 = VERTEX_POINT('',#144587); +#144587 = CARTESIAN_POINT('',(133.05723,-112.7731,1.585)); +#144588 = LINE('',#144589,#144590); +#144589 = CARTESIAN_POINT('',(132.77607,-112.7731,1.585)); +#144590 = VECTOR('',#144591,1.); +#144591 = DIRECTION('',(1.,0.,0.)); +#144592 = ORIENTED_EDGE('',*,*,#144593,.T.); +#144593 = EDGE_CURVE('',#144586,#144594,#144596,.T.); +#144594 = VERTEX_POINT('',#144595); +#144595 = CARTESIAN_POINT('',(133.05723,-112.8931,1.585)); +#144596 = CIRCLE('',#144597,6.000000000043E-02); +#144597 = AXIS2_PLACEMENT_3D('',#144598,#144599,#144600); +#144598 = CARTESIAN_POINT('',(133.05723022558,-112.8331,1.585)); +#144599 = DIRECTION('',(0.,0.,-1.)); +#144600 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#144601 = ORIENTED_EDGE('',*,*,#144602,.T.); +#144602 = EDGE_CURVE('',#144594,#144575,#144603,.T.); +#144603 = LINE('',#144604,#144605); +#144604 = CARTESIAN_POINT('',(133.05723,-112.8931,1.585)); +#144605 = VECTOR('',#144606,1.); +#144606 = DIRECTION('',(-1.,0.,0.)); +#144607 = PLANE('',#144608); +#144608 = AXIS2_PLACEMENT_3D('',#144609,#144610,#144611); +#144609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144610 = DIRECTION('',(0.,0.,1.)); +#144611 = DIRECTION('',(1.,0.,-0.)); +#144612 = SHELL_BASED_SURFACE_MODEL('',(#144613)); +#144613 = OPEN_SHELL('',(#144614)); +#144614 = ADVANCED_FACE('',(#144615),#144651,.T.); +#144615 = FACE_BOUND('',#144616,.F.); +#144616 = EDGE_LOOP('',(#144617,#144628,#144636,#144645)); +#144617 = ORIENTED_EDGE('',*,*,#144618,.T.); +#144618 = EDGE_CURVE('',#144619,#144621,#144623,.T.); +#144619 = VERTEX_POINT('',#144620); +#144620 = CARTESIAN_POINT('',(136.77607,-112.8931,1.585)); +#144621 = VERTEX_POINT('',#144622); +#144622 = CARTESIAN_POINT('',(136.77607,-112.7731,1.585)); +#144623 = CIRCLE('',#144624,6.000000000043E-02); +#144624 = AXIS2_PLACEMENT_3D('',#144625,#144626,#144627); +#144625 = CARTESIAN_POINT('',(136.77606977441,-112.8331,1.585)); +#144626 = DIRECTION('',(0.,0.,-1.)); +#144627 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#144628 = ORIENTED_EDGE('',*,*,#144629,.T.); +#144629 = EDGE_CURVE('',#144621,#144630,#144632,.T.); +#144630 = VERTEX_POINT('',#144631); +#144631 = CARTESIAN_POINT('',(137.05723,-112.7731,1.585)); +#144632 = LINE('',#144633,#144634); +#144633 = CARTESIAN_POINT('',(136.77607,-112.7731,1.585)); +#144634 = VECTOR('',#144635,1.); +#144635 = DIRECTION('',(1.,0.,0.)); +#144636 = ORIENTED_EDGE('',*,*,#144637,.T.); +#144637 = EDGE_CURVE('',#144630,#144638,#144640,.T.); +#144638 = VERTEX_POINT('',#144639); +#144639 = CARTESIAN_POINT('',(137.05723,-112.8931,1.585)); +#144640 = CIRCLE('',#144641,6.000000000043E-02); +#144641 = AXIS2_PLACEMENT_3D('',#144642,#144643,#144644); +#144642 = CARTESIAN_POINT('',(137.05723022558,-112.8331,1.585)); +#144643 = DIRECTION('',(0.,0.,-1.)); +#144644 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#144645 = ORIENTED_EDGE('',*,*,#144646,.T.); +#144646 = EDGE_CURVE('',#144638,#144619,#144647,.T.); +#144647 = LINE('',#144648,#144649); +#144648 = CARTESIAN_POINT('',(137.05723,-112.8931,1.585)); +#144649 = VECTOR('',#144650,1.); +#144650 = DIRECTION('',(-1.,0.,0.)); +#144651 = PLANE('',#144652); +#144652 = AXIS2_PLACEMENT_3D('',#144653,#144654,#144655); +#144653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144654 = DIRECTION('',(0.,0.,1.)); +#144655 = DIRECTION('',(1.,0.,-0.)); +#144656 = SHELL_BASED_SURFACE_MODEL('',(#144657)); +#144657 = OPEN_SHELL('',(#144658)); +#144658 = ADVANCED_FACE('',(#144659),#144695,.T.); +#144659 = FACE_BOUND('',#144660,.F.); +#144660 = EDGE_LOOP('',(#144661,#144672,#144680,#144689)); +#144661 = ORIENTED_EDGE('',*,*,#144662,.T.); +#144662 = EDGE_CURVE('',#144663,#144665,#144667,.T.); +#144663 = VERTEX_POINT('',#144664); +#144664 = CARTESIAN_POINT('',(179.279392,-112.4056,1.585)); +#144665 = VERTEX_POINT('',#144666); +#144666 = CARTESIAN_POINT('',(179.279392,-112.2856,1.585)); +#144667 = CIRCLE('',#144668,6.000000000043E-02); +#144668 = AXIS2_PLACEMENT_3D('',#144669,#144670,#144671); +#144669 = CARTESIAN_POINT('',(179.27939177441,-112.3456,1.585)); +#144670 = DIRECTION('',(0.,0.,-1.)); +#144671 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#144672 = ORIENTED_EDGE('',*,*,#144673,.T.); +#144673 = EDGE_CURVE('',#144665,#144674,#144676,.T.); +#144674 = VERTEX_POINT('',#144675); +#144675 = CARTESIAN_POINT('',(179.753908,-112.2856,1.585)); +#144676 = LINE('',#144677,#144678); +#144677 = CARTESIAN_POINT('',(179.279392,-112.2856,1.585)); +#144678 = VECTOR('',#144679,1.); +#144679 = DIRECTION('',(1.,0.,0.)); +#144680 = ORIENTED_EDGE('',*,*,#144681,.T.); +#144681 = EDGE_CURVE('',#144674,#144682,#144684,.T.); +#144682 = VERTEX_POINT('',#144683); +#144683 = CARTESIAN_POINT('',(179.753908,-112.4056,1.585)); +#144684 = CIRCLE('',#144685,6.000000000042E-02); +#144685 = AXIS2_PLACEMENT_3D('',#144686,#144687,#144688); +#144686 = CARTESIAN_POINT('',(179.75390822558,-112.3456,1.585)); +#144687 = DIRECTION('',(0.,0.,-1.)); +#144688 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#144689 = ORIENTED_EDGE('',*,*,#144690,.T.); +#144690 = EDGE_CURVE('',#144682,#144663,#144691,.T.); +#144691 = LINE('',#144692,#144693); +#144692 = CARTESIAN_POINT('',(179.753908,-112.4056,1.585)); +#144693 = VECTOR('',#144694,1.); +#144694 = DIRECTION('',(-1.,0.,0.)); +#144695 = PLANE('',#144696); +#144696 = AXIS2_PLACEMENT_3D('',#144697,#144698,#144699); +#144697 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144698 = DIRECTION('',(0.,0.,1.)); +#144699 = DIRECTION('',(1.,0.,-0.)); +#144700 = SHELL_BASED_SURFACE_MODEL('',(#144701)); +#144701 = OPEN_SHELL('',(#144702)); +#144702 = ADVANCED_FACE('',(#144703),#144805,.T.); +#144703 = FACE_BOUND('',#144704,.F.); +#144704 = EDGE_LOOP('',(#144705,#144715,#144724,#144732,#144740,#144749, + #144757,#144765,#144774,#144782,#144790,#144799)); +#144705 = ORIENTED_EDGE('',*,*,#144706,.T.); +#144706 = EDGE_CURVE('',#144707,#144709,#144711,.T.); +#144707 = VERTEX_POINT('',#144708); +#144708 = CARTESIAN_POINT('',(84.01279,-110.793532,1.585)); +#144709 = VERTEX_POINT('',#144710); +#144710 = CARTESIAN_POINT('',(85.255533,-109.968502,1.585)); +#144711 = LINE('',#144712,#144713); +#144712 = CARTESIAN_POINT('',(84.01279,-110.793532,1.585)); +#144713 = VECTOR('',#144714,1.); +#144714 = DIRECTION('',(0.833120949421,0.553090845735,0.)); +#144715 = ORIENTED_EDGE('',*,*,#144716,.T.); +#144716 = EDGE_CURVE('',#144709,#144717,#144719,.T.); +#144717 = VERTEX_POINT('',#144718); +#144718 = CARTESIAN_POINT('',(85.418746,-110.213321,1.585)); +#144719 = CIRCLE('',#144720,0.150000199605); +#144720 = AXIS2_PLACEMENT_3D('',#144721,#144722,#144723); +#144721 = CARTESIAN_POINT('',(85.31279079848,-110.1071440008,1.585)); +#144722 = DIRECTION('',(0.,0.,-1.)); +#144723 = DIRECTION('',(-0.381718148583,0.92427877561,-0.)); +#144724 = ORIENTED_EDGE('',*,*,#144725,.T.); +#144725 = EDGE_CURVE('',#144717,#144726,#144728,.T.); +#144726 = VERTEX_POINT('',#144727); +#144727 = CARTESIAN_POINT('',(84.283207,-110.97381,1.585)); +#144728 = LINE('',#144729,#144730); +#144729 = CARTESIAN_POINT('',(85.418746,-110.213321,1.585)); +#144730 = VECTOR('',#144731,1.); +#144731 = DIRECTION('',(-0.830878956213,-0.556453196704,0.)); +#144732 = ORIENTED_EDGE('',*,*,#144733,.T.); +#144733 = EDGE_CURVE('',#144726,#144734,#144736,.T.); +#144734 = VERTEX_POINT('',#144735); +#144735 = CARTESIAN_POINT('',(85.418746,-111.7343,1.585)); +#144736 = LINE('',#144737,#144738); +#144737 = CARTESIAN_POINT('',(84.283207,-110.97381,1.585)); +#144738 = VECTOR('',#144739,1.); +#144739 = DIRECTION('',(0.830878617913,-0.556453701843,0.)); +#144740 = ORIENTED_EDGE('',*,*,#144741,.T.); +#144741 = EDGE_CURVE('',#144734,#144742,#144744,.T.); +#144742 = VERTEX_POINT('',#144743); +#144743 = CARTESIAN_POINT('',(85.255533,-111.979119,1.585)); +#144744 = CIRCLE('',#144745,0.150000458656); +#144745 = AXIS2_PLACEMENT_3D('',#144746,#144747,#144748); +#144746 = CARTESIAN_POINT('',(85.31278969366,-111.8404762626,1.585)); +#144747 = DIRECTION('',(0.,0.,-1.)); +#144748 = DIRECTION('',(0.706373215715,0.707839586432,0.)); +#144749 = ORIENTED_EDGE('',*,*,#144750,.T.); +#144750 = EDGE_CURVE('',#144742,#144751,#144753,.T.); +#144751 = VERTEX_POINT('',#144752); +#144752 = CARTESIAN_POINT('',(84.01279,-111.154088,1.585)); +#144753 = LINE('',#144754,#144755); +#144754 = CARTESIAN_POINT('',(85.255533,-111.979119,1.585)); +#144755 = VECTOR('',#144756,1.); +#144756 = DIRECTION('',(-0.833120640512,0.553091311045,0.)); +#144757 = ORIENTED_EDGE('',*,*,#144758,.T.); +#144758 = EDGE_CURVE('',#144751,#144759,#144761,.T.); +#144759 = VERTEX_POINT('',#144760); +#144760 = CARTESIAN_POINT('',(82.770047,-111.979119,1.585)); +#144761 = LINE('',#144762,#144763); +#144762 = CARTESIAN_POINT('',(84.01279,-111.154088,1.585)); +#144763 = VECTOR('',#144764,1.); +#144764 = DIRECTION('',(-0.833120640512,-0.553091311045,0.)); +#144765 = ORIENTED_EDGE('',*,*,#144766,.T.); +#144766 = EDGE_CURVE('',#144759,#144767,#144769,.T.); +#144767 = VERTEX_POINT('',#144768); +#144768 = CARTESIAN_POINT('',(82.606835,-111.7343,1.585)); +#144769 = CIRCLE('',#144770,0.149999951563); +#144770 = AXIS2_PLACEMENT_3D('',#144771,#144772,#144773); +#144771 = CARTESIAN_POINT('',(82.712789849692,-111.8404769998,1.585)); +#144772 = DIRECTION('',(0.,0.,-1.)); +#144773 = DIRECTION('',(0.381714458644,-0.92428029951,0.)); +#144774 = ORIENTED_EDGE('',*,*,#144775,.T.); +#144775 = EDGE_CURVE('',#144767,#144776,#144778,.T.); +#144776 = VERTEX_POINT('',#144777); +#144777 = CARTESIAN_POINT('',(83.742372,-110.97381,1.585)); +#144778 = LINE('',#144779,#144780); +#144779 = CARTESIAN_POINT('',(82.606835,-111.7343,1.585)); +#144780 = VECTOR('',#144781,1.); +#144781 = DIRECTION('',(0.830878164782,0.556454378444,0.)); +#144782 = ORIENTED_EDGE('',*,*,#144783,.T.); +#144783 = EDGE_CURVE('',#144776,#144784,#144786,.T.); +#144784 = VERTEX_POINT('',#144785); +#144785 = CARTESIAN_POINT('',(82.606835,-110.213321,1.585)); +#144786 = LINE('',#144787,#144788); +#144787 = CARTESIAN_POINT('',(83.742372,-110.97381,1.585)); +#144788 = VECTOR('',#144789,1.); +#144789 = DIRECTION('',(-0.830878503082,0.556453873305,0.)); +#144790 = ORIENTED_EDGE('',*,*,#144791,.T.); +#144791 = EDGE_CURVE('',#144784,#144792,#144794,.T.); +#144792 = VERTEX_POINT('',#144793); +#144793 = CARTESIAN_POINT('',(82.770047,-109.968502,1.585)); +#144794 = CIRCLE('',#144795,0.150000000327); +#144795 = AXIS2_PLACEMENT_3D('',#144796,#144797,#144798); +#144796 = CARTESIAN_POINT('',(82.712790057666,-110.1071441388,1.585)); +#144797 = DIRECTION('',(0.,0.,-1.)); +#144798 = DIRECTION('',(-0.706367049567,-0.707845739753,-0.)); +#144799 = ORIENTED_EDGE('',*,*,#144800,.T.); +#144800 = EDGE_CURVE('',#144792,#144707,#144801,.T.); +#144801 = LINE('',#144802,#144803); +#144802 = CARTESIAN_POINT('',(82.770047,-109.968502,1.585)); +#144803 = VECTOR('',#144804,1.); +#144804 = DIRECTION('',(0.833120949421,-0.553090845735,0.)); +#144805 = PLANE('',#144806); +#144806 = AXIS2_PLACEMENT_3D('',#144807,#144808,#144809); +#144807 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144808 = DIRECTION('',(0.,0.,1.)); +#144809 = DIRECTION('',(1.,0.,-0.)); +#144810 = SHELL_BASED_SURFACE_MODEL('',(#144811)); +#144811 = OPEN_SHELL('',(#144812)); +#144812 = ADVANCED_FACE('',(#144813),#144849,.T.); +#144813 = FACE_BOUND('',#144814,.F.); +#144814 = EDGE_LOOP('',(#144815,#144826,#144834,#144843)); +#144815 = ORIENTED_EDGE('',*,*,#144816,.T.); +#144816 = EDGE_CURVE('',#144817,#144819,#144821,.T.); +#144817 = VERTEX_POINT('',#144818); +#144818 = CARTESIAN_POINT('',(118.77607,-111.8731,1.585)); +#144819 = VERTEX_POINT('',#144820); +#144820 = CARTESIAN_POINT('',(118.77607,-111.7531,1.585)); +#144821 = CIRCLE('',#144822,6.000000000042E-02); +#144822 = AXIS2_PLACEMENT_3D('',#144823,#144824,#144825); +#144823 = CARTESIAN_POINT('',(118.77606977441,-111.8131,1.585)); +#144824 = DIRECTION('',(0.,0.,-1.)); +#144825 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#144826 = ORIENTED_EDGE('',*,*,#144827,.T.); +#144827 = EDGE_CURVE('',#144819,#144828,#144830,.T.); +#144828 = VERTEX_POINT('',#144829); +#144829 = CARTESIAN_POINT('',(119.05723,-111.7531,1.585)); +#144830 = LINE('',#144831,#144832); +#144831 = CARTESIAN_POINT('',(118.77607,-111.7531,1.585)); +#144832 = VECTOR('',#144833,1.); +#144833 = DIRECTION('',(1.,0.,0.)); +#144834 = ORIENTED_EDGE('',*,*,#144835,.T.); +#144835 = EDGE_CURVE('',#144828,#144836,#144838,.T.); +#144836 = VERTEX_POINT('',#144837); +#144837 = CARTESIAN_POINT('',(119.05723,-111.8731,1.585)); +#144838 = CIRCLE('',#144839,6.000000000042E-02); +#144839 = AXIS2_PLACEMENT_3D('',#144840,#144841,#144842); +#144840 = CARTESIAN_POINT('',(119.05723022558,-111.8131,1.585)); +#144841 = DIRECTION('',(0.,0.,-1.)); +#144842 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#144843 = ORIENTED_EDGE('',*,*,#144844,.T.); +#144844 = EDGE_CURVE('',#144836,#144817,#144845,.T.); +#144845 = LINE('',#144846,#144847); +#144846 = CARTESIAN_POINT('',(119.05723,-111.8731,1.585)); +#144847 = VECTOR('',#144848,1.); +#144848 = DIRECTION('',(-1.,0.,0.)); +#144849 = PLANE('',#144850); +#144850 = AXIS2_PLACEMENT_3D('',#144851,#144852,#144853); +#144851 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144852 = DIRECTION('',(0.,0.,1.)); +#144853 = DIRECTION('',(1.,0.,-0.)); +#144854 = SHELL_BASED_SURFACE_MODEL('',(#144855)); +#144855 = OPEN_SHELL('',(#144856)); +#144856 = ADVANCED_FACE('',(#144857),#144893,.T.); +#144857 = FACE_BOUND('',#144858,.F.); +#144858 = EDGE_LOOP('',(#144859,#144870,#144878,#144887)); +#144859 = ORIENTED_EDGE('',*,*,#144860,.T.); +#144860 = EDGE_CURVE('',#144861,#144863,#144865,.T.); +#144861 = VERTEX_POINT('',#144862); +#144862 = CARTESIAN_POINT('',(132.77607,-111.8731,1.585)); +#144863 = VERTEX_POINT('',#144864); +#144864 = CARTESIAN_POINT('',(132.77607,-111.7531,1.585)); +#144865 = CIRCLE('',#144866,6.000000000042E-02); +#144866 = AXIS2_PLACEMENT_3D('',#144867,#144868,#144869); +#144867 = CARTESIAN_POINT('',(132.77606977441,-111.8131,1.585)); +#144868 = DIRECTION('',(0.,0.,-1.)); +#144869 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#144870 = ORIENTED_EDGE('',*,*,#144871,.T.); +#144871 = EDGE_CURVE('',#144863,#144872,#144874,.T.); +#144872 = VERTEX_POINT('',#144873); +#144873 = CARTESIAN_POINT('',(133.05723,-111.7531,1.585)); +#144874 = LINE('',#144875,#144876); +#144875 = CARTESIAN_POINT('',(132.77607,-111.7531,1.585)); +#144876 = VECTOR('',#144877,1.); +#144877 = DIRECTION('',(1.,0.,0.)); +#144878 = ORIENTED_EDGE('',*,*,#144879,.T.); +#144879 = EDGE_CURVE('',#144872,#144880,#144882,.T.); +#144880 = VERTEX_POINT('',#144881); +#144881 = CARTESIAN_POINT('',(133.05723,-111.8731,1.585)); +#144882 = CIRCLE('',#144883,6.000000000042E-02); +#144883 = AXIS2_PLACEMENT_3D('',#144884,#144885,#144886); +#144884 = CARTESIAN_POINT('',(133.05723022558,-111.8131,1.585)); +#144885 = DIRECTION('',(0.,0.,-1.)); +#144886 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#144887 = ORIENTED_EDGE('',*,*,#144888,.T.); +#144888 = EDGE_CURVE('',#144880,#144861,#144889,.T.); +#144889 = LINE('',#144890,#144891); +#144890 = CARTESIAN_POINT('',(133.05723,-111.8731,1.585)); +#144891 = VECTOR('',#144892,1.); +#144892 = DIRECTION('',(-1.,0.,0.)); +#144893 = PLANE('',#144894); +#144894 = AXIS2_PLACEMENT_3D('',#144895,#144896,#144897); +#144895 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144896 = DIRECTION('',(0.,0.,1.)); +#144897 = DIRECTION('',(1.,0.,-0.)); +#144898 = SHELL_BASED_SURFACE_MODEL('',(#144899)); +#144899 = OPEN_SHELL('',(#144900)); +#144900 = ADVANCED_FACE('',(#144901),#144937,.T.); +#144901 = FACE_BOUND('',#144902,.F.); +#144902 = EDGE_LOOP('',(#144903,#144914,#144922,#144931)); +#144903 = ORIENTED_EDGE('',*,*,#144904,.T.); +#144904 = EDGE_CURVE('',#144905,#144907,#144909,.T.); +#144905 = VERTEX_POINT('',#144906); +#144906 = CARTESIAN_POINT('',(136.77607,-111.8731,1.585)); +#144907 = VERTEX_POINT('',#144908); +#144908 = CARTESIAN_POINT('',(136.77607,-111.7531,1.585)); +#144909 = CIRCLE('',#144910,6.000000000042E-02); +#144910 = AXIS2_PLACEMENT_3D('',#144911,#144912,#144913); +#144911 = CARTESIAN_POINT('',(136.77606977441,-111.8131,1.585)); +#144912 = DIRECTION('',(0.,0.,-1.)); +#144913 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#144914 = ORIENTED_EDGE('',*,*,#144915,.T.); +#144915 = EDGE_CURVE('',#144907,#144916,#144918,.T.); +#144916 = VERTEX_POINT('',#144917); +#144917 = CARTESIAN_POINT('',(137.05723,-111.7531,1.585)); +#144918 = LINE('',#144919,#144920); +#144919 = CARTESIAN_POINT('',(136.77607,-111.7531,1.585)); +#144920 = VECTOR('',#144921,1.); +#144921 = DIRECTION('',(1.,0.,0.)); +#144922 = ORIENTED_EDGE('',*,*,#144923,.T.); +#144923 = EDGE_CURVE('',#144916,#144924,#144926,.T.); +#144924 = VERTEX_POINT('',#144925); +#144925 = CARTESIAN_POINT('',(137.05723,-111.8731,1.585)); +#144926 = CIRCLE('',#144927,6.000000000042E-02); +#144927 = AXIS2_PLACEMENT_3D('',#144928,#144929,#144930); +#144928 = CARTESIAN_POINT('',(137.05723022558,-111.8131,1.585)); +#144929 = DIRECTION('',(0.,0.,-1.)); +#144930 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#144931 = ORIENTED_EDGE('',*,*,#144932,.T.); +#144932 = EDGE_CURVE('',#144924,#144905,#144933,.T.); +#144933 = LINE('',#144934,#144935); +#144934 = CARTESIAN_POINT('',(137.05723,-111.8731,1.585)); +#144935 = VECTOR('',#144936,1.); +#144936 = DIRECTION('',(-1.,0.,0.)); +#144937 = PLANE('',#144938); +#144938 = AXIS2_PLACEMENT_3D('',#144939,#144940,#144941); +#144939 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144940 = DIRECTION('',(0.,0.,1.)); +#144941 = DIRECTION('',(1.,0.,-0.)); +#144942 = SHELL_BASED_SURFACE_MODEL('',(#144943)); +#144943 = OPEN_SHELL('',(#144944)); +#144944 = ADVANCED_FACE('',(#144945),#144981,.T.); +#144945 = FACE_BOUND('',#144946,.F.); +#144946 = EDGE_LOOP('',(#144947,#144958,#144966,#144975)); +#144947 = ORIENTED_EDGE('',*,*,#144948,.T.); +#144948 = EDGE_CURVE('',#144949,#144951,#144953,.T.); +#144949 = VERTEX_POINT('',#144950); +#144950 = CARTESIAN_POINT('',(92.004392,-111.8606,1.585)); +#144951 = VERTEX_POINT('',#144952); +#144952 = CARTESIAN_POINT('',(92.004392,-111.7406,1.585)); +#144953 = CIRCLE('',#144954,6.000000000042E-02); +#144954 = AXIS2_PLACEMENT_3D('',#144955,#144956,#144957); +#144955 = CARTESIAN_POINT('',(92.004391774412,-111.8006,1.585)); +#144956 = DIRECTION('',(0.,0.,-1.)); +#144957 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#144958 = ORIENTED_EDGE('',*,*,#144959,.T.); +#144959 = EDGE_CURVE('',#144951,#144960,#144962,.T.); +#144960 = VERTEX_POINT('',#144961); +#144961 = CARTESIAN_POINT('',(92.478908,-111.7406,1.585)); +#144962 = LINE('',#144963,#144964); +#144963 = CARTESIAN_POINT('',(92.004392,-111.7406,1.585)); +#144964 = VECTOR('',#144965,1.); +#144965 = DIRECTION('',(1.,0.,0.)); +#144966 = ORIENTED_EDGE('',*,*,#144967,.T.); +#144967 = EDGE_CURVE('',#144960,#144968,#144970,.T.); +#144968 = VERTEX_POINT('',#144969); +#144969 = CARTESIAN_POINT('',(92.478908,-111.8606,1.585)); +#144970 = CIRCLE('',#144971,6.000000000043E-02); +#144971 = AXIS2_PLACEMENT_3D('',#144972,#144973,#144974); +#144972 = CARTESIAN_POINT('',(92.478908225588,-111.8006,1.585)); +#144973 = DIRECTION('',(0.,0.,-1.)); +#144974 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#144975 = ORIENTED_EDGE('',*,*,#144976,.T.); +#144976 = EDGE_CURVE('',#144968,#144949,#144977,.T.); +#144977 = LINE('',#144978,#144979); +#144978 = CARTESIAN_POINT('',(92.478908,-111.8606,1.585)); +#144979 = VECTOR('',#144980,1.); +#144980 = DIRECTION('',(-1.,0.,0.)); +#144981 = PLANE('',#144982); +#144982 = AXIS2_PLACEMENT_3D('',#144983,#144984,#144985); +#144983 = CARTESIAN_POINT('',(0.,0.,1.585)); +#144984 = DIRECTION('',(0.,0.,1.)); +#144985 = DIRECTION('',(1.,0.,-0.)); +#144986 = SHELL_BASED_SURFACE_MODEL('',(#144987)); +#144987 = OPEN_SHELL('',(#144988)); +#144988 = ADVANCED_FACE('',(#144989),#145048,.T.); +#144989 = FACE_BOUND('',#144990,.F.); +#144990 = EDGE_LOOP('',(#144991,#145002,#145010,#145018,#145026,#145034, + #145042)); +#144991 = ORIENTED_EDGE('',*,*,#144992,.T.); +#144992 = EDGE_CURVE('',#144993,#144995,#144997,.T.); +#144993 = VERTEX_POINT('',#144994); +#144994 = CARTESIAN_POINT('',(95.179392,-111.8606,1.585)); +#144995 = VERTEX_POINT('',#144996); +#144996 = CARTESIAN_POINT('',(95.179392,-111.7406,1.585)); +#144997 = CIRCLE('',#144998,6.000000000043E-02); +#144998 = AXIS2_PLACEMENT_3D('',#144999,#145000,#145001); +#144999 = CARTESIAN_POINT('',(95.179391774412,-111.8006,1.585)); +#145000 = DIRECTION('',(0.,0.,-1.)); +#145001 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145002 = ORIENTED_EDGE('',*,*,#145003,.T.); +#145003 = EDGE_CURVE('',#144995,#145004,#145006,.T.); +#145004 = VERTEX_POINT('',#145005); +#145005 = CARTESIAN_POINT('',(95.495872,-111.7406,1.585)); +#145006 = LINE('',#145007,#145008); +#145007 = CARTESIAN_POINT('',(95.179392,-111.7406,1.585)); +#145008 = VECTOR('',#145009,1.); +#145009 = DIRECTION('',(1.,0.,0.)); +#145010 = ORIENTED_EDGE('',*,*,#145011,.T.); +#145011 = EDGE_CURVE('',#145004,#145012,#145014,.T.); +#145012 = VERTEX_POINT('',#145013); +#145013 = CARTESIAN_POINT('',(95.494532,-111.743836,1.585)); +#145014 = LINE('',#145015,#145016); +#145015 = CARTESIAN_POINT('',(95.495872,-111.7406,1.585)); +#145016 = VECTOR('',#145017,1.); +#145017 = DIRECTION('',(-0.382587147216,-0.923919409248,0.)); +#145018 = ORIENTED_EDGE('',*,*,#145019,.T.); +#145019 = EDGE_CURVE('',#145012,#145020,#145022,.T.); +#145020 = VERTEX_POINT('',#145021); +#145021 = CARTESIAN_POINT('',(95.494532,-111.802364,1.585)); +#145022 = LINE('',#145023,#145024); +#145023 = CARTESIAN_POINT('',(95.494532,-111.743836,1.585)); +#145024 = VECTOR('',#145025,1.); +#145025 = DIRECTION('',(0.,-1.,0.)); +#145026 = ORIENTED_EDGE('',*,*,#145027,.T.); +#145027 = EDGE_CURVE('',#145020,#145028,#145030,.T.); +#145028 = VERTEX_POINT('',#145029); +#145029 = CARTESIAN_POINT('',(95.51693,-111.856436,1.585)); +#145030 = LINE('',#145031,#145032); +#145031 = CARTESIAN_POINT('',(95.494532,-111.802364,1.585)); +#145032 = VECTOR('',#145033,1.); +#145033 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#145034 = ORIENTED_EDGE('',*,*,#145035,.T.); +#145035 = EDGE_CURVE('',#145028,#145036,#145038,.T.); +#145036 = VERTEX_POINT('',#145037); +#145037 = CARTESIAN_POINT('',(95.521094,-111.8606,1.585)); +#145038 = LINE('',#145039,#145040); +#145039 = CARTESIAN_POINT('',(95.51693,-111.856436,1.585)); +#145040 = VECTOR('',#145041,1.); +#145041 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#145042 = ORIENTED_EDGE('',*,*,#145043,.T.); +#145043 = EDGE_CURVE('',#145036,#144993,#145044,.T.); +#145044 = LINE('',#145045,#145046); +#145045 = CARTESIAN_POINT('',(95.521094,-111.8606,1.585)); +#145046 = VECTOR('',#145047,1.); +#145047 = DIRECTION('',(-1.,0.,0.)); +#145048 = PLANE('',#145049); +#145049 = AXIS2_PLACEMENT_3D('',#145050,#145051,#145052); +#145050 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145051 = DIRECTION('',(0.,0.,1.)); +#145052 = DIRECTION('',(1.,0.,-0.)); +#145053 = SHELL_BASED_SURFACE_MODEL('',(#145054)); +#145054 = OPEN_SHELL('',(#145055)); +#145055 = ADVANCED_FACE('',(#145056),#145092,.T.); +#145056 = FACE_BOUND('',#145057,.F.); +#145057 = EDGE_LOOP('',(#145058,#145069,#145077,#145086)); +#145058 = ORIENTED_EDGE('',*,*,#145059,.T.); +#145059 = EDGE_CURVE('',#145060,#145062,#145064,.T.); +#145060 = VERTEX_POINT('',#145061); +#145061 = CARTESIAN_POINT('',(98.504392,-111.8606,1.585)); +#145062 = VERTEX_POINT('',#145063); +#145063 = CARTESIAN_POINT('',(98.504392,-111.7406,1.585)); +#145064 = CIRCLE('',#145065,6.000000000042E-02); +#145065 = AXIS2_PLACEMENT_3D('',#145066,#145067,#145068); +#145066 = CARTESIAN_POINT('',(98.504391774412,-111.8006,1.585)); +#145067 = DIRECTION('',(0.,0.,-1.)); +#145068 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145069 = ORIENTED_EDGE('',*,*,#145070,.T.); +#145070 = EDGE_CURVE('',#145062,#145071,#145073,.T.); +#145071 = VERTEX_POINT('',#145072); +#145072 = CARTESIAN_POINT('',(98.978908,-111.7406,1.585)); +#145073 = LINE('',#145074,#145075); +#145074 = CARTESIAN_POINT('',(98.504392,-111.7406,1.585)); +#145075 = VECTOR('',#145076,1.); +#145076 = DIRECTION('',(1.,0.,0.)); +#145077 = ORIENTED_EDGE('',*,*,#145078,.T.); +#145078 = EDGE_CURVE('',#145071,#145079,#145081,.T.); +#145079 = VERTEX_POINT('',#145080); +#145080 = CARTESIAN_POINT('',(98.978908,-111.8606,1.585)); +#145081 = CIRCLE('',#145082,6.000000000043E-02); +#145082 = AXIS2_PLACEMENT_3D('',#145083,#145084,#145085); +#145083 = CARTESIAN_POINT('',(98.978908225588,-111.8006,1.585)); +#145084 = DIRECTION('',(0.,0.,-1.)); +#145085 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145086 = ORIENTED_EDGE('',*,*,#145087,.T.); +#145087 = EDGE_CURVE('',#145079,#145060,#145088,.T.); +#145088 = LINE('',#145089,#145090); +#145089 = CARTESIAN_POINT('',(98.978908,-111.8606,1.585)); +#145090 = VECTOR('',#145091,1.); +#145091 = DIRECTION('',(-1.,0.,0.)); +#145092 = PLANE('',#145093); +#145093 = AXIS2_PLACEMENT_3D('',#145094,#145095,#145096); +#145094 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145095 = DIRECTION('',(0.,0.,1.)); +#145096 = DIRECTION('',(1.,0.,-0.)); +#145097 = SHELL_BASED_SURFACE_MODEL('',(#145098)); +#145098 = OPEN_SHELL('',(#145099)); +#145099 = ADVANCED_FACE('',(#145100),#145136,.T.); +#145100 = FACE_BOUND('',#145101,.F.); +#145101 = EDGE_LOOP('',(#145102,#145113,#145121,#145130)); +#145102 = ORIENTED_EDGE('',*,*,#145103,.T.); +#145103 = EDGE_CURVE('',#145104,#145106,#145108,.T.); +#145104 = VERTEX_POINT('',#145105); +#145105 = CARTESIAN_POINT('',(102.679392,-111.8606,1.585)); +#145106 = VERTEX_POINT('',#145107); +#145107 = CARTESIAN_POINT('',(102.679392,-111.7406,1.585)); +#145108 = CIRCLE('',#145109,6.000000000043E-02); +#145109 = AXIS2_PLACEMENT_3D('',#145110,#145111,#145112); +#145110 = CARTESIAN_POINT('',(102.67939177441,-111.8006,1.585)); +#145111 = DIRECTION('',(0.,0.,-1.)); +#145112 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145113 = ORIENTED_EDGE('',*,*,#145114,.T.); +#145114 = EDGE_CURVE('',#145106,#145115,#145117,.T.); +#145115 = VERTEX_POINT('',#145116); +#145116 = CARTESIAN_POINT('',(103.153908,-111.7406,1.585)); +#145117 = LINE('',#145118,#145119); +#145118 = CARTESIAN_POINT('',(102.679392,-111.7406,1.585)); +#145119 = VECTOR('',#145120,1.); +#145120 = DIRECTION('',(1.,0.,0.)); +#145121 = ORIENTED_EDGE('',*,*,#145122,.T.); +#145122 = EDGE_CURVE('',#145115,#145123,#145125,.T.); +#145123 = VERTEX_POINT('',#145124); +#145124 = CARTESIAN_POINT('',(103.153908,-111.8606,1.585)); +#145125 = CIRCLE('',#145126,6.000000000043E-02); +#145126 = AXIS2_PLACEMENT_3D('',#145127,#145128,#145129); +#145127 = CARTESIAN_POINT('',(103.15390822558,-111.8006,1.585)); +#145128 = DIRECTION('',(0.,0.,-1.)); +#145129 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145130 = ORIENTED_EDGE('',*,*,#145131,.T.); +#145131 = EDGE_CURVE('',#145123,#145104,#145132,.T.); +#145132 = LINE('',#145133,#145134); +#145133 = CARTESIAN_POINT('',(103.153908,-111.8606,1.585)); +#145134 = VECTOR('',#145135,1.); +#145135 = DIRECTION('',(-1.,0.,0.)); +#145136 = PLANE('',#145137); +#145137 = AXIS2_PLACEMENT_3D('',#145138,#145139,#145140); +#145138 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145139 = DIRECTION('',(0.,0.,1.)); +#145140 = DIRECTION('',(1.,0.,-0.)); +#145141 = SHELL_BASED_SURFACE_MODEL('',(#145142)); +#145142 = OPEN_SHELL('',(#145143)); +#145143 = ADVANCED_FACE('',(#145144),#145180,.T.); +#145144 = FACE_BOUND('',#145145,.F.); +#145145 = EDGE_LOOP('',(#145146,#145157,#145165,#145174)); +#145146 = ORIENTED_EDGE('',*,*,#145147,.T.); +#145147 = EDGE_CURVE('',#145148,#145150,#145152,.T.); +#145148 = VERTEX_POINT('',#145149); +#145149 = CARTESIAN_POINT('',(106.679392,-111.8606,1.585)); +#145150 = VERTEX_POINT('',#145151); +#145151 = CARTESIAN_POINT('',(106.679392,-111.7406,1.585)); +#145152 = CIRCLE('',#145153,6.000000000043E-02); +#145153 = AXIS2_PLACEMENT_3D('',#145154,#145155,#145156); +#145154 = CARTESIAN_POINT('',(106.67939177441,-111.8006,1.585)); +#145155 = DIRECTION('',(0.,0.,-1.)); +#145156 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145157 = ORIENTED_EDGE('',*,*,#145158,.T.); +#145158 = EDGE_CURVE('',#145150,#145159,#145161,.T.); +#145159 = VERTEX_POINT('',#145160); +#145160 = CARTESIAN_POINT('',(107.153908,-111.7406,1.585)); +#145161 = LINE('',#145162,#145163); +#145162 = CARTESIAN_POINT('',(106.679392,-111.7406,1.585)); +#145163 = VECTOR('',#145164,1.); +#145164 = DIRECTION('',(1.,0.,0.)); +#145165 = ORIENTED_EDGE('',*,*,#145166,.T.); +#145166 = EDGE_CURVE('',#145159,#145167,#145169,.T.); +#145167 = VERTEX_POINT('',#145168); +#145168 = CARTESIAN_POINT('',(107.153908,-111.8606,1.585)); +#145169 = CIRCLE('',#145170,6.000000000043E-02); +#145170 = AXIS2_PLACEMENT_3D('',#145171,#145172,#145173); +#145171 = CARTESIAN_POINT('',(107.15390822558,-111.8006,1.585)); +#145172 = DIRECTION('',(0.,0.,-1.)); +#145173 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145174 = ORIENTED_EDGE('',*,*,#145175,.T.); +#145175 = EDGE_CURVE('',#145167,#145148,#145176,.T.); +#145176 = LINE('',#145177,#145178); +#145177 = CARTESIAN_POINT('',(107.153908,-111.8606,1.585)); +#145178 = VECTOR('',#145179,1.); +#145179 = DIRECTION('',(-1.,0.,0.)); +#145180 = PLANE('',#145181); +#145181 = AXIS2_PLACEMENT_3D('',#145182,#145183,#145184); +#145182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145183 = DIRECTION('',(0.,0.,1.)); +#145184 = DIRECTION('',(1.,0.,-0.)); +#145185 = SHELL_BASED_SURFACE_MODEL('',(#145186)); +#145186 = OPEN_SHELL('',(#145187)); +#145187 = ADVANCED_FACE('',(#145188),#145224,.T.); +#145188 = FACE_BOUND('',#145189,.F.); +#145189 = EDGE_LOOP('',(#145190,#145201,#145209,#145218)); +#145190 = ORIENTED_EDGE('',*,*,#145191,.T.); +#145191 = EDGE_CURVE('',#145192,#145194,#145196,.T.); +#145192 = VERTEX_POINT('',#145193); +#145193 = CARTESIAN_POINT('',(110.679392,-111.8606,1.585)); +#145194 = VERTEX_POINT('',#145195); +#145195 = CARTESIAN_POINT('',(110.679392,-111.7406,1.585)); +#145196 = CIRCLE('',#145197,6.000000000043E-02); +#145197 = AXIS2_PLACEMENT_3D('',#145198,#145199,#145200); +#145198 = CARTESIAN_POINT('',(110.67939177441,-111.8006,1.585)); +#145199 = DIRECTION('',(0.,0.,-1.)); +#145200 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145201 = ORIENTED_EDGE('',*,*,#145202,.T.); +#145202 = EDGE_CURVE('',#145194,#145203,#145205,.T.); +#145203 = VERTEX_POINT('',#145204); +#145204 = CARTESIAN_POINT('',(111.153908,-111.7406,1.585)); +#145205 = LINE('',#145206,#145207); +#145206 = CARTESIAN_POINT('',(110.679392,-111.7406,1.585)); +#145207 = VECTOR('',#145208,1.); +#145208 = DIRECTION('',(1.,0.,0.)); +#145209 = ORIENTED_EDGE('',*,*,#145210,.T.); +#145210 = EDGE_CURVE('',#145203,#145211,#145213,.T.); +#145211 = VERTEX_POINT('',#145212); +#145212 = CARTESIAN_POINT('',(111.153908,-111.8606,1.585)); +#145213 = CIRCLE('',#145214,6.000000000043E-02); +#145214 = AXIS2_PLACEMENT_3D('',#145215,#145216,#145217); +#145215 = CARTESIAN_POINT('',(111.15390822558,-111.8006,1.585)); +#145216 = DIRECTION('',(0.,0.,-1.)); +#145217 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145218 = ORIENTED_EDGE('',*,*,#145219,.T.); +#145219 = EDGE_CURVE('',#145211,#145192,#145220,.T.); +#145220 = LINE('',#145221,#145222); +#145221 = CARTESIAN_POINT('',(111.153908,-111.8606,1.585)); +#145222 = VECTOR('',#145223,1.); +#145223 = DIRECTION('',(-1.,0.,0.)); +#145224 = PLANE('',#145225); +#145225 = AXIS2_PLACEMENT_3D('',#145226,#145227,#145228); +#145226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145227 = DIRECTION('',(0.,0.,1.)); +#145228 = DIRECTION('',(1.,0.,-0.)); +#145229 = SHELL_BASED_SURFACE_MODEL('',(#145230)); +#145230 = OPEN_SHELL('',(#145231)); +#145231 = ADVANCED_FACE('',(#145232),#145268,.T.); +#145232 = FACE_BOUND('',#145233,.F.); +#145233 = EDGE_LOOP('',(#145234,#145245,#145253,#145262)); +#145234 = ORIENTED_EDGE('',*,*,#145235,.T.); +#145235 = EDGE_CURVE('',#145236,#145238,#145240,.T.); +#145236 = VERTEX_POINT('',#145237); +#145237 = CARTESIAN_POINT('',(114.679392,-111.8606,1.585)); +#145238 = VERTEX_POINT('',#145239); +#145239 = CARTESIAN_POINT('',(114.679392,-111.7406,1.585)); +#145240 = CIRCLE('',#145241,6.000000000043E-02); +#145241 = AXIS2_PLACEMENT_3D('',#145242,#145243,#145244); +#145242 = CARTESIAN_POINT('',(114.67939177441,-111.8006,1.585)); +#145243 = DIRECTION('',(0.,0.,-1.)); +#145244 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145245 = ORIENTED_EDGE('',*,*,#145246,.T.); +#145246 = EDGE_CURVE('',#145238,#145247,#145249,.T.); +#145247 = VERTEX_POINT('',#145248); +#145248 = CARTESIAN_POINT('',(115.153908,-111.7406,1.585)); +#145249 = LINE('',#145250,#145251); +#145250 = CARTESIAN_POINT('',(114.679392,-111.7406,1.585)); +#145251 = VECTOR('',#145252,1.); +#145252 = DIRECTION('',(1.,0.,0.)); +#145253 = ORIENTED_EDGE('',*,*,#145254,.T.); +#145254 = EDGE_CURVE('',#145247,#145255,#145257,.T.); +#145255 = VERTEX_POINT('',#145256); +#145256 = CARTESIAN_POINT('',(115.153908,-111.8606,1.585)); +#145257 = CIRCLE('',#145258,6.000000000043E-02); +#145258 = AXIS2_PLACEMENT_3D('',#145259,#145260,#145261); +#145259 = CARTESIAN_POINT('',(115.15390822558,-111.8006,1.585)); +#145260 = DIRECTION('',(0.,0.,-1.)); +#145261 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145262 = ORIENTED_EDGE('',*,*,#145263,.T.); +#145263 = EDGE_CURVE('',#145255,#145236,#145264,.T.); +#145264 = LINE('',#145265,#145266); +#145265 = CARTESIAN_POINT('',(115.153908,-111.8606,1.585)); +#145266 = VECTOR('',#145267,1.); +#145267 = DIRECTION('',(-1.,0.,0.)); +#145268 = PLANE('',#145269); +#145269 = AXIS2_PLACEMENT_3D('',#145270,#145271,#145272); +#145270 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145271 = DIRECTION('',(0.,0.,1.)); +#145272 = DIRECTION('',(1.,0.,-0.)); +#145273 = SHELL_BASED_SURFACE_MODEL('',(#145274)); +#145274 = OPEN_SHELL('',(#145275)); +#145275 = ADVANCED_FACE('',(#145276),#145312,.T.); +#145276 = FACE_BOUND('',#145277,.F.); +#145277 = EDGE_LOOP('',(#145278,#145289,#145297,#145306)); +#145278 = ORIENTED_EDGE('',*,*,#145279,.T.); +#145279 = EDGE_CURVE('',#145280,#145282,#145284,.T.); +#145280 = VERTEX_POINT('',#145281); +#145281 = CARTESIAN_POINT('',(124.679392,-111.8606,1.585)); +#145282 = VERTEX_POINT('',#145283); +#145283 = CARTESIAN_POINT('',(124.679392,-111.7406,1.585)); +#145284 = CIRCLE('',#145285,6.000000000043E-02); +#145285 = AXIS2_PLACEMENT_3D('',#145286,#145287,#145288); +#145286 = CARTESIAN_POINT('',(124.67939177441,-111.8006,1.585)); +#145287 = DIRECTION('',(0.,0.,-1.)); +#145288 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#145289 = ORIENTED_EDGE('',*,*,#145290,.T.); +#145290 = EDGE_CURVE('',#145282,#145291,#145293,.T.); +#145291 = VERTEX_POINT('',#145292); +#145292 = CARTESIAN_POINT('',(125.153908,-111.7406,1.585)); +#145293 = LINE('',#145294,#145295); +#145294 = CARTESIAN_POINT('',(124.679392,-111.7406,1.585)); +#145295 = VECTOR('',#145296,1.); +#145296 = DIRECTION('',(1.,0.,0.)); +#145297 = ORIENTED_EDGE('',*,*,#145298,.T.); +#145298 = EDGE_CURVE('',#145291,#145299,#145301,.T.); +#145299 = VERTEX_POINT('',#145300); +#145300 = CARTESIAN_POINT('',(125.153908,-111.8606,1.585)); +#145301 = CIRCLE('',#145302,6.000000000043E-02); +#145302 = AXIS2_PLACEMENT_3D('',#145303,#145304,#145305); +#145303 = CARTESIAN_POINT('',(125.15390822558,-111.8006,1.585)); +#145304 = DIRECTION('',(0.,0.,-1.)); +#145305 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#145306 = ORIENTED_EDGE('',*,*,#145307,.T.); +#145307 = EDGE_CURVE('',#145299,#145280,#145308,.T.); +#145308 = LINE('',#145309,#145310); +#145309 = CARTESIAN_POINT('',(125.153908,-111.8606,1.585)); +#145310 = VECTOR('',#145311,1.); +#145311 = DIRECTION('',(-1.,0.,0.)); +#145312 = PLANE('',#145313); +#145313 = AXIS2_PLACEMENT_3D('',#145314,#145315,#145316); +#145314 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145315 = DIRECTION('',(0.,0.,1.)); +#145316 = DIRECTION('',(1.,0.,-0.)); +#145317 = SHELL_BASED_SURFACE_MODEL('',(#145318)); +#145318 = OPEN_SHELL('',(#145319)); +#145319 = ADVANCED_FACE('',(#145320),#145356,.T.); +#145320 = FACE_BOUND('',#145321,.F.); +#145321 = EDGE_LOOP('',(#145322,#145333,#145341,#145350)); +#145322 = ORIENTED_EDGE('',*,*,#145323,.T.); +#145323 = EDGE_CURVE('',#145324,#145326,#145328,.T.); +#145324 = VERTEX_POINT('',#145325); +#145325 = CARTESIAN_POINT('',(128.679392,-111.8606,1.585)); +#145326 = VERTEX_POINT('',#145327); +#145327 = CARTESIAN_POINT('',(128.679392,-111.7406,1.585)); +#145328 = CIRCLE('',#145329,6.000000000043E-02); +#145329 = AXIS2_PLACEMENT_3D('',#145330,#145331,#145332); +#145330 = CARTESIAN_POINT('',(128.67939177441,-111.8006,1.585)); +#145331 = DIRECTION('',(0.,0.,-1.)); +#145332 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#145333 = ORIENTED_EDGE('',*,*,#145334,.T.); +#145334 = EDGE_CURVE('',#145326,#145335,#145337,.T.); +#145335 = VERTEX_POINT('',#145336); +#145336 = CARTESIAN_POINT('',(129.153908,-111.7406,1.585)); +#145337 = LINE('',#145338,#145339); +#145338 = CARTESIAN_POINT('',(128.679392,-111.7406,1.585)); +#145339 = VECTOR('',#145340,1.); +#145340 = DIRECTION('',(1.,0.,0.)); +#145341 = ORIENTED_EDGE('',*,*,#145342,.T.); +#145342 = EDGE_CURVE('',#145335,#145343,#145345,.T.); +#145343 = VERTEX_POINT('',#145344); +#145344 = CARTESIAN_POINT('',(129.153908,-111.8606,1.585)); +#145345 = CIRCLE('',#145346,6.000000000042E-02); +#145346 = AXIS2_PLACEMENT_3D('',#145347,#145348,#145349); +#145347 = CARTESIAN_POINT('',(129.15390822558,-111.8006,1.585)); +#145348 = DIRECTION('',(0.,0.,-1.)); +#145349 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#145350 = ORIENTED_EDGE('',*,*,#145351,.T.); +#145351 = EDGE_CURVE('',#145343,#145324,#145352,.T.); +#145352 = LINE('',#145353,#145354); +#145353 = CARTESIAN_POINT('',(129.153908,-111.8606,1.585)); +#145354 = VECTOR('',#145355,1.); +#145355 = DIRECTION('',(-1.,0.,0.)); +#145356 = PLANE('',#145357); +#145357 = AXIS2_PLACEMENT_3D('',#145358,#145359,#145360); +#145358 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145359 = DIRECTION('',(0.,0.,1.)); +#145360 = DIRECTION('',(1.,0.,-0.)); +#145361 = SHELL_BASED_SURFACE_MODEL('',(#145362)); +#145362 = OPEN_SHELL('',(#145363)); +#145363 = ADVANCED_FACE('',(#145364),#145523,.T.); +#145364 = FACE_BOUND('',#145365,.F.); +#145365 = EDGE_LOOP('',(#145366,#145377,#145385,#145393,#145401,#145409, + #145417,#145425,#145434,#145442,#145451,#145459,#145467,#145475, + #145484,#145492,#145500,#145508,#145517)); +#145366 = ORIENTED_EDGE('',*,*,#145367,.T.); +#145367 = EDGE_CURVE('',#145368,#145370,#145372,.T.); +#145368 = VERTEX_POINT('',#145369); +#145369 = CARTESIAN_POINT('',(115.621204,-110.328456,1.585)); +#145370 = VERTEX_POINT('',#145371); +#145371 = CARTESIAN_POINT('',(116.130599,-110.337786,1.585)); +#145372 = CIRCLE('',#145373,0.450326844012); +#145373 = AXIS2_PLACEMENT_3D('',#145374,#145375,#145376); +#145374 = CARTESIAN_POINT('',(115.8691010301,-110.7044098919,1.585)); +#145375 = DIRECTION('',(0.,0.,-1.)); +#145376 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#145377 = ORIENTED_EDGE('',*,*,#145378,.T.); +#145378 = EDGE_CURVE('',#145370,#145379,#145381,.T.); +#145379 = VERTEX_POINT('',#145380); +#145380 = CARTESIAN_POINT('',(116.194052,-110.403316,1.585)); +#145381 = LINE('',#145382,#145383); +#145382 = CARTESIAN_POINT('',(116.130599,-110.337786,1.585)); +#145383 = VECTOR('',#145384,1.); +#145384 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#145385 = ORIENTED_EDGE('',*,*,#145386,.T.); +#145386 = EDGE_CURVE('',#145379,#145387,#145389,.T.); +#145387 = VERTEX_POINT('',#145388); +#145388 = CARTESIAN_POINT('',(116.252113,-110.523763,1.585)); +#145389 = LINE('',#145390,#145391); +#145390 = CARTESIAN_POINT('',(116.194052,-110.403316,1.585)); +#145391 = VECTOR('',#145392,1.); +#145392 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#145393 = ORIENTED_EDGE('',*,*,#145394,.T.); +#145394 = EDGE_CURVE('',#145387,#145395,#145397,.T.); +#145395 = VERTEX_POINT('',#145396); +#145396 = CARTESIAN_POINT('',(116.251354,-110.650095,1.585)); +#145397 = LINE('',#145398,#145399); +#145398 = CARTESIAN_POINT('',(116.252113,-110.523763,1.585)); +#145399 = VECTOR('',#145400,1.); +#145400 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#145401 = ORIENTED_EDGE('',*,*,#145402,.T.); +#145402 = EDGE_CURVE('',#145395,#145403,#145405,.T.); +#145403 = VERTEX_POINT('',#145404); +#145404 = CARTESIAN_POINT('',(116.193296,-110.818158,1.585)); +#145405 = LINE('',#145406,#145407); +#145406 = CARTESIAN_POINT('',(116.251354,-110.650095,1.585)); +#145407 = VECTOR('',#145408,1.); +#145408 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#145409 = ORIENTED_EDGE('',*,*,#145410,.T.); +#145410 = EDGE_CURVE('',#145403,#145411,#145413,.T.); +#145411 = VERTEX_POINT('',#145412); +#145412 = CARTESIAN_POINT('',(115.740573,-111.272919,1.585)); +#145413 = LINE('',#145414,#145415); +#145414 = CARTESIAN_POINT('',(116.193296,-110.818158,1.585)); +#145415 = VECTOR('',#145416,1.); +#145416 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#145417 = ORIENTED_EDGE('',*,*,#145418,.T.); +#145418 = EDGE_CURVE('',#145411,#145419,#145421,.T.); +#145419 = VERTEX_POINT('',#145420); +#145420 = CARTESIAN_POINT('',(116.193186,-111.27436,1.585)); +#145421 = LINE('',#145422,#145423); +#145422 = CARTESIAN_POINT('',(115.740573,-111.272919,1.585)); +#145423 = VECTOR('',#145424,1.); +#145424 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#145425 = ORIENTED_EDGE('',*,*,#145426,.T.); +#145426 = EDGE_CURVE('',#145419,#145427,#145429,.T.); +#145427 = VERTEX_POINT('',#145428); +#145428 = CARTESIAN_POINT('',(116.178554,-111.422919,1.585)); +#145429 = CIRCLE('',#145430,7.500006711463E-02); +#145430 = AXIS2_PLACEMENT_3D('',#145431,#145432,#145433); +#145431 = CARTESIAN_POINT('',(116.17855406711,-111.3479189328,1.585)); +#145432 = DIRECTION('',(0.,0.,-1.)); +#145433 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#145434 = ORIENTED_EDGE('',*,*,#145435,.T.); +#145435 = EDGE_CURVE('',#145427,#145436,#145438,.T.); +#145436 = VERTEX_POINT('',#145437); +#145437 = CARTESIAN_POINT('',(115.544875,-111.421478,1.585)); +#145438 = LINE('',#145439,#145440); +#145439 = CARTESIAN_POINT('',(116.178554,-111.422919,1.585)); +#145440 = VECTOR('',#145441,1.); +#145441 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#145442 = ORIENTED_EDGE('',*,*,#145443,.T.); +#145443 = EDGE_CURVE('',#145436,#145444,#145446,.T.); +#145444 = VERTEX_POINT('',#145445); +#145445 = CARTESIAN_POINT('',(115.506474,-111.294886,1.585)); +#145446 = CIRCLE('',#145447,7.500021013108E-02); +#145447 = AXIS2_PLACEMENT_3D('',#145448,#145449,#145450); +#145448 = CARTESIAN_POINT('',(115.5595073167,-111.3479189976,1.585)); +#145449 = DIRECTION('',(0.,0.,-1.)); +#145450 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#145451 = ORIENTED_EDGE('',*,*,#145452,.T.); +#145452 = EDGE_CURVE('',#145444,#145453,#145455,.T.); +#145453 = VERTEX_POINT('',#145454); +#145454 = CARTESIAN_POINT('',(116.065382,-110.735976,1.585)); +#145455 = LINE('',#145456,#145457); +#145456 = CARTESIAN_POINT('',(115.506474,-111.294886,1.585)); +#145457 = VECTOR('',#145458,1.); +#145458 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#145459 = ORIENTED_EDGE('',*,*,#145460,.T.); +#145460 = EDGE_CURVE('',#145453,#145461,#145463,.T.); +#145461 = VERTEX_POINT('',#145462); +#145462 = CARTESIAN_POINT('',(116.103554,-110.621463,1.585)); +#145463 = LINE('',#145464,#145465); +#145464 = CARTESIAN_POINT('',(116.065382,-110.735976,1.585)); +#145465 = VECTOR('',#145466,1.); +#145466 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#145467 = ORIENTED_EDGE('',*,*,#145468,.T.); +#145468 = EDGE_CURVE('',#145461,#145469,#145471,.T.); +#145469 = VERTEX_POINT('',#145470); +#145470 = CARTESIAN_POINT('',(116.103554,-110.5561,1.585)); +#145471 = LINE('',#145472,#145473); +#145472 = CARTESIAN_POINT('',(116.103554,-110.621463,1.585)); +#145473 = VECTOR('',#145474,1.); +#145474 = DIRECTION('',(0.,1.,0.)); +#145475 = ORIENTED_EDGE('',*,*,#145476,.T.); +#145476 = EDGE_CURVE('',#145469,#145477,#145479,.T.); +#145477 = VERTEX_POINT('',#145478); +#145478 = CARTESIAN_POINT('',(115.970373,-110.422919,1.585)); +#145479 = CIRCLE('',#145480,0.18686440374); +#145480 = AXIS2_PLACEMENT_3D('',#145481,#145482,#145483); +#145481 = CARTESIAN_POINT('',(115.922837,-110.603636,1.585)); +#145482 = DIRECTION('',(0.,0.,1.)); +#145483 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#145484 = ORIENTED_EDGE('',*,*,#145485,.T.); +#145485 = EDGE_CURVE('',#145477,#145486,#145488,.T.); +#145486 = VERTEX_POINT('',#145487); +#145487 = CARTESIAN_POINT('',(115.767688,-110.422919,1.585)); +#145488 = LINE('',#145489,#145490); +#145489 = CARTESIAN_POINT('',(115.970373,-110.422919,1.585)); +#145490 = VECTOR('',#145491,1.); +#145491 = DIRECTION('',(-1.,0.,0.)); +#145492 = ORIENTED_EDGE('',*,*,#145493,.T.); +#145493 = EDGE_CURVE('',#145486,#145494,#145496,.T.); +#145494 = VERTEX_POINT('',#145495); +#145495 = CARTESIAN_POINT('',(115.699172,-110.457177,1.585)); +#145496 = LINE('',#145497,#145498); +#145497 = CARTESIAN_POINT('',(115.767688,-110.422919,1.585)); +#145498 = VECTOR('',#145499,1.); +#145499 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#145500 = ORIENTED_EDGE('',*,*,#145501,.T.); +#145501 = EDGE_CURVE('',#145494,#145502,#145504,.T.); +#145502 = VERTEX_POINT('',#145503); +#145503 = CARTESIAN_POINT('',(115.648794,-110.505517,1.585)); +#145504 = LINE('',#145505,#145506); +#145505 = CARTESIAN_POINT('',(115.699172,-110.457177,1.585)); +#145506 = VECTOR('',#145507,1.); +#145507 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#145508 = ORIENTED_EDGE('',*,*,#145509,.T.); +#145509 = EDGE_CURVE('',#145502,#145510,#145512,.T.); +#145510 = VERTEX_POINT('',#145511); +#145511 = CARTESIAN_POINT('',(115.554093,-110.390124,1.585)); +#145512 = CIRCLE('',#145513,7.499996838527E-02); +#145513 = AXIS2_PLACEMENT_3D('',#145514,#145515,#145516); +#145514 = CARTESIAN_POINT('',(115.607126,-110.4431569724,1.585)); +#145515 = DIRECTION('',(0.,0.,-1.)); +#145516 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#145517 = ORIENTED_EDGE('',*,*,#145518,.T.); +#145518 = EDGE_CURVE('',#145510,#145368,#145519,.T.); +#145519 = LINE('',#145520,#145521); +#145520 = CARTESIAN_POINT('',(115.554093,-110.390124,1.585)); +#145521 = VECTOR('',#145522,1.); +#145522 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#145523 = PLANE('',#145524); +#145524 = AXIS2_PLACEMENT_3D('',#145525,#145526,#145527); +#145525 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145526 = DIRECTION('',(0.,0.,1.)); +#145527 = DIRECTION('',(1.,0.,-0.)); +#145528 = SHELL_BASED_SURFACE_MODEL('',(#145529)); +#145529 = OPEN_SHELL('',(#145530)); +#145530 = ADVANCED_FACE('',(#145531),#145690,.T.); +#145531 = FACE_BOUND('',#145532,.F.); +#145532 = EDGE_LOOP('',(#145533,#145544,#145552,#145560,#145568,#145576, + #145584,#145592,#145601,#145609,#145618,#145626,#145634,#145642, + #145651,#145659,#145667,#145675,#145684)); +#145533 = ORIENTED_EDGE('',*,*,#145534,.T.); +#145534 = EDGE_CURVE('',#145535,#145537,#145539,.T.); +#145535 = VERTEX_POINT('',#145536); +#145536 = CARTESIAN_POINT('',(118.668823,-110.328456,1.585)); +#145537 = VERTEX_POINT('',#145538); +#145538 = CARTESIAN_POINT('',(119.178218,-110.337786,1.585)); +#145539 = CIRCLE('',#145540,0.450326844012); +#145540 = AXIS2_PLACEMENT_3D('',#145541,#145542,#145543); +#145541 = CARTESIAN_POINT('',(118.9167200301,-110.7044098919,1.585)); +#145542 = DIRECTION('',(0.,0.,-1.)); +#145543 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#145544 = ORIENTED_EDGE('',*,*,#145545,.T.); +#145545 = EDGE_CURVE('',#145537,#145546,#145548,.T.); +#145546 = VERTEX_POINT('',#145547); +#145547 = CARTESIAN_POINT('',(119.241671,-110.403316,1.585)); +#145548 = LINE('',#145549,#145550); +#145549 = CARTESIAN_POINT('',(119.178218,-110.337786,1.585)); +#145550 = VECTOR('',#145551,1.); +#145551 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#145552 = ORIENTED_EDGE('',*,*,#145553,.T.); +#145553 = EDGE_CURVE('',#145546,#145554,#145556,.T.); +#145554 = VERTEX_POINT('',#145555); +#145555 = CARTESIAN_POINT('',(119.299732,-110.523763,1.585)); +#145556 = LINE('',#145557,#145558); +#145557 = CARTESIAN_POINT('',(119.241671,-110.403316,1.585)); +#145558 = VECTOR('',#145559,1.); +#145559 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#145560 = ORIENTED_EDGE('',*,*,#145561,.T.); +#145561 = EDGE_CURVE('',#145554,#145562,#145564,.T.); +#145562 = VERTEX_POINT('',#145563); +#145563 = CARTESIAN_POINT('',(119.298973,-110.650095,1.585)); +#145564 = LINE('',#145565,#145566); +#145565 = CARTESIAN_POINT('',(119.299732,-110.523763,1.585)); +#145566 = VECTOR('',#145567,1.); +#145567 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#145568 = ORIENTED_EDGE('',*,*,#145569,.T.); +#145569 = EDGE_CURVE('',#145562,#145570,#145572,.T.); +#145570 = VERTEX_POINT('',#145571); +#145571 = CARTESIAN_POINT('',(119.240915,-110.818158,1.585)); +#145572 = LINE('',#145573,#145574); +#145573 = CARTESIAN_POINT('',(119.298973,-110.650095,1.585)); +#145574 = VECTOR('',#145575,1.); +#145575 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#145576 = ORIENTED_EDGE('',*,*,#145577,.T.); +#145577 = EDGE_CURVE('',#145570,#145578,#145580,.T.); +#145578 = VERTEX_POINT('',#145579); +#145579 = CARTESIAN_POINT('',(118.788192,-111.272919,1.585)); +#145580 = LINE('',#145581,#145582); +#145581 = CARTESIAN_POINT('',(119.240915,-110.818158,1.585)); +#145582 = VECTOR('',#145583,1.); +#145583 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#145584 = ORIENTED_EDGE('',*,*,#145585,.T.); +#145585 = EDGE_CURVE('',#145578,#145586,#145588,.T.); +#145586 = VERTEX_POINT('',#145587); +#145587 = CARTESIAN_POINT('',(119.240805,-111.27436,1.585)); +#145588 = LINE('',#145589,#145590); +#145589 = CARTESIAN_POINT('',(118.788192,-111.272919,1.585)); +#145590 = VECTOR('',#145591,1.); +#145591 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#145592 = ORIENTED_EDGE('',*,*,#145593,.T.); +#145593 = EDGE_CURVE('',#145586,#145594,#145596,.T.); +#145594 = VERTEX_POINT('',#145595); +#145595 = CARTESIAN_POINT('',(119.226173,-111.422919,1.585)); +#145596 = CIRCLE('',#145597,7.500006711463E-02); +#145597 = AXIS2_PLACEMENT_3D('',#145598,#145599,#145600); +#145598 = CARTESIAN_POINT('',(119.22617306711,-111.3479189328,1.585)); +#145599 = DIRECTION('',(0.,0.,-1.)); +#145600 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#145601 = ORIENTED_EDGE('',*,*,#145602,.T.); +#145602 = EDGE_CURVE('',#145594,#145603,#145605,.T.); +#145603 = VERTEX_POINT('',#145604); +#145604 = CARTESIAN_POINT('',(118.592494,-111.421478,1.585)); +#145605 = LINE('',#145606,#145607); +#145606 = CARTESIAN_POINT('',(119.226173,-111.422919,1.585)); +#145607 = VECTOR('',#145608,1.); +#145608 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#145609 = ORIENTED_EDGE('',*,*,#145610,.T.); +#145610 = EDGE_CURVE('',#145603,#145611,#145613,.T.); +#145611 = VERTEX_POINT('',#145612); +#145612 = CARTESIAN_POINT('',(118.554093,-111.294886,1.585)); +#145613 = CIRCLE('',#145614,7.500021013108E-02); +#145614 = AXIS2_PLACEMENT_3D('',#145615,#145616,#145617); +#145615 = CARTESIAN_POINT('',(118.6071263167,-111.3479189976,1.585)); +#145616 = DIRECTION('',(0.,0.,-1.)); +#145617 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#145618 = ORIENTED_EDGE('',*,*,#145619,.T.); +#145619 = EDGE_CURVE('',#145611,#145620,#145622,.T.); +#145620 = VERTEX_POINT('',#145621); +#145621 = CARTESIAN_POINT('',(119.113001,-110.735976,1.585)); +#145622 = LINE('',#145623,#145624); +#145623 = CARTESIAN_POINT('',(118.554093,-111.294886,1.585)); +#145624 = VECTOR('',#145625,1.); +#145625 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#145626 = ORIENTED_EDGE('',*,*,#145627,.T.); +#145627 = EDGE_CURVE('',#145620,#145628,#145630,.T.); +#145628 = VERTEX_POINT('',#145629); +#145629 = CARTESIAN_POINT('',(119.151173,-110.621463,1.585)); +#145630 = LINE('',#145631,#145632); +#145631 = CARTESIAN_POINT('',(119.113001,-110.735976,1.585)); +#145632 = VECTOR('',#145633,1.); +#145633 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#145634 = ORIENTED_EDGE('',*,*,#145635,.T.); +#145635 = EDGE_CURVE('',#145628,#145636,#145638,.T.); +#145636 = VERTEX_POINT('',#145637); +#145637 = CARTESIAN_POINT('',(119.151173,-110.5561,1.585)); +#145638 = LINE('',#145639,#145640); +#145639 = CARTESIAN_POINT('',(119.151173,-110.621463,1.585)); +#145640 = VECTOR('',#145641,1.); +#145641 = DIRECTION('',(0.,1.,0.)); +#145642 = ORIENTED_EDGE('',*,*,#145643,.T.); +#145643 = EDGE_CURVE('',#145636,#145644,#145646,.T.); +#145644 = VERTEX_POINT('',#145645); +#145645 = CARTESIAN_POINT('',(119.017992,-110.422919,1.585)); +#145646 = CIRCLE('',#145647,0.18686440374); +#145647 = AXIS2_PLACEMENT_3D('',#145648,#145649,#145650); +#145648 = CARTESIAN_POINT('',(118.970456,-110.603636,1.585)); +#145649 = DIRECTION('',(0.,0.,1.)); +#145650 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#145651 = ORIENTED_EDGE('',*,*,#145652,.T.); +#145652 = EDGE_CURVE('',#145644,#145653,#145655,.T.); +#145653 = VERTEX_POINT('',#145654); +#145654 = CARTESIAN_POINT('',(118.815307,-110.422919,1.585)); +#145655 = LINE('',#145656,#145657); +#145656 = CARTESIAN_POINT('',(119.017992,-110.422919,1.585)); +#145657 = VECTOR('',#145658,1.); +#145658 = DIRECTION('',(-1.,0.,0.)); +#145659 = ORIENTED_EDGE('',*,*,#145660,.T.); +#145660 = EDGE_CURVE('',#145653,#145661,#145663,.T.); +#145661 = VERTEX_POINT('',#145662); +#145662 = CARTESIAN_POINT('',(118.746791,-110.457177,1.585)); +#145663 = LINE('',#145664,#145665); +#145664 = CARTESIAN_POINT('',(118.815307,-110.422919,1.585)); +#145665 = VECTOR('',#145666,1.); +#145666 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#145667 = ORIENTED_EDGE('',*,*,#145668,.T.); +#145668 = EDGE_CURVE('',#145661,#145669,#145671,.T.); +#145669 = VERTEX_POINT('',#145670); +#145670 = CARTESIAN_POINT('',(118.696413,-110.505517,1.585)); +#145671 = LINE('',#145672,#145673); +#145672 = CARTESIAN_POINT('',(118.746791,-110.457177,1.585)); +#145673 = VECTOR('',#145674,1.); +#145674 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#145675 = ORIENTED_EDGE('',*,*,#145676,.T.); +#145676 = EDGE_CURVE('',#145669,#145677,#145679,.T.); +#145677 = VERTEX_POINT('',#145678); +#145678 = CARTESIAN_POINT('',(118.601712,-110.390124,1.585)); +#145679 = CIRCLE('',#145680,7.499996838527E-02); +#145680 = AXIS2_PLACEMENT_3D('',#145681,#145682,#145683); +#145681 = CARTESIAN_POINT('',(118.654745,-110.4431569724,1.585)); +#145682 = DIRECTION('',(0.,0.,-1.)); +#145683 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#145684 = ORIENTED_EDGE('',*,*,#145685,.T.); +#145685 = EDGE_CURVE('',#145677,#145535,#145686,.T.); +#145686 = LINE('',#145687,#145688); +#145687 = CARTESIAN_POINT('',(118.601712,-110.390124,1.585)); +#145688 = VECTOR('',#145689,1.); +#145689 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#145690 = PLANE('',#145691); +#145691 = AXIS2_PLACEMENT_3D('',#145692,#145693,#145694); +#145692 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145693 = DIRECTION('',(0.,0.,1.)); +#145694 = DIRECTION('',(1.,0.,-0.)); +#145695 = SHELL_BASED_SURFACE_MODEL('',(#145696)); +#145696 = OPEN_SHELL('',(#145697)); +#145697 = ADVANCED_FACE('',(#145698),#145832,.T.); +#145698 = FACE_BOUND('',#145699,.F.); +#145699 = EDGE_LOOP('',(#145700,#145710,#145718,#145727,#145735,#145743, + #145752,#145760,#145769,#145777,#145785,#145793,#145801,#145810, + #145818,#145826)); +#145700 = ORIENTED_EDGE('',*,*,#145701,.T.); +#145701 = EDGE_CURVE('',#145702,#145704,#145706,.T.); +#145702 = VERTEX_POINT('',#145703); +#145703 = CARTESIAN_POINT('',(129.839752,-110.294941,1.585)); +#145704 = VERTEX_POINT('',#145705); +#145705 = CARTESIAN_POINT('',(129.878208,-110.27436,1.585)); +#145706 = LINE('',#145707,#145708); +#145707 = CARTESIAN_POINT('',(129.839752,-110.294941,1.585)); +#145708 = VECTOR('',#145709,1.); +#145709 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#145710 = ORIENTED_EDGE('',*,*,#145711,.T.); +#145711 = EDGE_CURVE('',#145704,#145712,#145714,.T.); +#145712 = VERTEX_POINT('',#145713); +#145713 = CARTESIAN_POINT('',(129.900045,-110.27436,1.585)); +#145714 = LINE('',#145715,#145716); +#145715 = CARTESIAN_POINT('',(129.878208,-110.27436,1.585)); +#145716 = VECTOR('',#145717,1.); +#145717 = DIRECTION('',(1.,0.,0.)); +#145718 = ORIENTED_EDGE('',*,*,#145719,.T.); +#145719 = EDGE_CURVE('',#145712,#145720,#145722,.T.); +#145720 = VERTEX_POINT('',#145721); +#145721 = CARTESIAN_POINT('',(129.96784,-110.347919,1.585)); +#145722 = CIRCLE('',#145723,7.216898094227E-02); +#145723 = AXIS2_PLACEMENT_3D('',#145724,#145725,#145726); +#145724 = CARTESIAN_POINT('',(129.89568706389,-110.3463972834,1.585)); +#145725 = DIRECTION('',(0.,0.,-1.)); +#145726 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#145727 = ORIENTED_EDGE('',*,*,#145728,.T.); +#145728 = EDGE_CURVE('',#145720,#145729,#145731,.T.); +#145729 = VERTEX_POINT('',#145730); +#145730 = CARTESIAN_POINT('',(129.96784,-111.272919,1.585)); +#145731 = LINE('',#145732,#145733); +#145732 = CARTESIAN_POINT('',(129.96784,-110.347919,1.585)); +#145733 = VECTOR('',#145734,1.); +#145734 = DIRECTION('',(0.,-1.,0.)); +#145735 = ORIENTED_EDGE('',*,*,#145736,.T.); +#145736 = EDGE_CURVE('',#145729,#145737,#145739,.T.); +#145737 = VERTEX_POINT('',#145738); +#145738 = CARTESIAN_POINT('',(130.193186,-111.27436,1.585)); +#145739 = LINE('',#145740,#145741); +#145740 = CARTESIAN_POINT('',(129.96784,-111.272919,1.585)); +#145741 = VECTOR('',#145742,1.); +#145742 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#145743 = ORIENTED_EDGE('',*,*,#145744,.T.); +#145744 = EDGE_CURVE('',#145737,#145745,#145747,.T.); +#145745 = VERTEX_POINT('',#145746); +#145746 = CARTESIAN_POINT('',(130.178554,-111.422919,1.585)); +#145747 = CIRCLE('',#145748,7.500006711463E-02); +#145748 = AXIS2_PLACEMENT_3D('',#145749,#145750,#145751); +#145749 = CARTESIAN_POINT('',(130.17855406711,-111.3479189328,1.585)); +#145750 = DIRECTION('',(0.,0.,-1.)); +#145751 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#145752 = ORIENTED_EDGE('',*,*,#145753,.T.); +#145753 = EDGE_CURVE('',#145745,#145754,#145756,.T.); +#145754 = VERTEX_POINT('',#145755); +#145755 = CARTESIAN_POINT('',(129.592494,-111.421478,1.585)); +#145756 = LINE('',#145757,#145758); +#145757 = CARTESIAN_POINT('',(130.178554,-111.422919,1.585)); +#145758 = VECTOR('',#145759,1.); +#145759 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#145760 = ORIENTED_EDGE('',*,*,#145761,.T.); +#145761 = EDGE_CURVE('',#145754,#145762,#145764,.T.); +#145762 = VERTEX_POINT('',#145763); +#145763 = CARTESIAN_POINT('',(129.607126,-111.272919,1.585)); +#145764 = CIRCLE('',#145765,7.500006711464E-02); +#145765 = AXIS2_PLACEMENT_3D('',#145766,#145767,#145768); +#145766 = CARTESIAN_POINT('',(129.60712593288,-111.3479190671,1.585)); +#145767 = DIRECTION('',(0.,0.,-1.)); +#145768 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#145769 = ORIENTED_EDGE('',*,*,#145770,.T.); +#145770 = EDGE_CURVE('',#145762,#145771,#145773,.T.); +#145771 = VERTEX_POINT('',#145772); +#145772 = CARTESIAN_POINT('',(129.81784,-111.272919,1.585)); +#145773 = LINE('',#145774,#145775); +#145774 = CARTESIAN_POINT('',(129.607126,-111.272919,1.585)); +#145775 = VECTOR('',#145776,1.); +#145776 = DIRECTION('',(1.,0.,0.)); +#145777 = ORIENTED_EDGE('',*,*,#145778,.T.); +#145778 = EDGE_CURVE('',#145771,#145779,#145781,.T.); +#145779 = VERTEX_POINT('',#145780); +#145780 = CARTESIAN_POINT('',(129.81784,-110.576604,1.585)); +#145781 = LINE('',#145782,#145783); +#145782 = CARTESIAN_POINT('',(129.81784,-111.272919,1.585)); +#145783 = VECTOR('',#145784,1.); +#145784 = DIRECTION('',(0.,1.,0.)); +#145785 = ORIENTED_EDGE('',*,*,#145786,.T.); +#145786 = EDGE_CURVE('',#145779,#145787,#145789,.T.); +#145787 = VERTEX_POINT('',#145788); +#145788 = CARTESIAN_POINT('',(129.742204,-110.649131,1.585)); +#145789 = LINE('',#145790,#145791); +#145790 = CARTESIAN_POINT('',(129.81784,-110.576604,1.585)); +#145791 = VECTOR('',#145792,1.); +#145792 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#145793 = ORIENTED_EDGE('',*,*,#145794,.T.); +#145794 = EDGE_CURVE('',#145787,#145795,#145797,.T.); +#145795 = VERTEX_POINT('',#145796); +#145796 = CARTESIAN_POINT('',(129.626935,-110.70597,1.585)); +#145797 = LINE('',#145798,#145799); +#145798 = CARTESIAN_POINT('',(129.742204,-110.649131,1.585)); +#145799 = VECTOR('',#145800,1.); +#145800 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#145801 = ORIENTED_EDGE('',*,*,#145802,.T.); +#145802 = EDGE_CURVE('',#145795,#145803,#145805,.T.); +#145803 = VERTEX_POINT('',#145804); +#145804 = CARTESIAN_POINT('',(129.573585,-110.566551,1.585)); +#145805 = CIRCLE('',#145806,7.50000527236E-02); +#145806 = AXIS2_PLACEMENT_3D('',#145807,#145808,#145809); +#145807 = CARTESIAN_POINT('',(129.60712555676,-110.6336333297,1.585)); +#145808 = DIRECTION('',(0.,0.,-1.)); +#145809 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#145810 = ORIENTED_EDGE('',*,*,#145811,.T.); +#145811 = EDGE_CURVE('',#145803,#145812,#145814,.T.); +#145812 = VERTEX_POINT('',#145813); +#145813 = CARTESIAN_POINT('',(129.657937,-110.524375,1.585)); +#145814 = LINE('',#145815,#145816); +#145815 = CARTESIAN_POINT('',(129.573585,-110.566551,1.585)); +#145816 = VECTOR('',#145817,1.); +#145817 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#145818 = ORIENTED_EDGE('',*,*,#145819,.T.); +#145819 = EDGE_CURVE('',#145812,#145820,#145822,.T.); +#145820 = VERTEX_POINT('',#145821); +#145821 = CARTESIAN_POINT('',(129.739316,-110.442996,1.585)); +#145822 = LINE('',#145823,#145824); +#145823 = CARTESIAN_POINT('',(129.657937,-110.524375,1.585)); +#145824 = VECTOR('',#145825,1.); +#145825 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#145826 = ORIENTED_EDGE('',*,*,#145827,.T.); +#145827 = EDGE_CURVE('',#145820,#145702,#145828,.T.); +#145828 = LINE('',#145829,#145830); +#145829 = CARTESIAN_POINT('',(129.739316,-110.442996,1.585)); +#145830 = VECTOR('',#145831,1.); +#145831 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#145832 = PLANE('',#145833); +#145833 = AXIS2_PLACEMENT_3D('',#145834,#145835,#145836); +#145834 = CARTESIAN_POINT('',(0.,0.,1.585)); +#145835 = DIRECTION('',(0.,0.,1.)); +#145836 = DIRECTION('',(1.,0.,-0.)); +#145837 = SHELL_BASED_SURFACE_MODEL('',(#145838)); +#145838 = OPEN_SHELL('',(#145839)); +#145839 = ADVANCED_FACE('',(#145840,#145951),#146003,.T.); +#145840 = FACE_BOUND('',#145841,.F.); +#145841 = EDGE_LOOP('',(#145842,#145853,#145861,#145870,#145878,#145887, + #145895,#145903,#145912,#145920,#145928,#145936,#145945)); +#145842 = ORIENTED_EDGE('',*,*,#145843,.T.); +#145843 = EDGE_CURVE('',#145844,#145846,#145848,.T.); +#145844 = VERTEX_POINT('',#145845); +#145845 = CARTESIAN_POINT('',(91.429996,-110.333287,1.585)); +#145846 = VERTEX_POINT('',#145847); +#145847 = CARTESIAN_POINT('',(91.503555,-110.272919,1.585)); +#145848 = CIRCLE('',#145849,7.500074938983E-02); +#145849 = AXIS2_PLACEMENT_3D('',#145850,#145851,#145852); +#145850 = CARTESIAN_POINT('',(91.50355546611,-110.3479197493,1.585)); +#145851 = DIRECTION('',(0.,0.,-1.)); +#145852 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#145853 = ORIENTED_EDGE('',*,*,#145854,.T.); +#145854 = EDGE_CURVE('',#145846,#145855,#145857,.T.); +#145855 = VERTEX_POINT('',#145856); +#145856 = CARTESIAN_POINT('',(91.899139,-110.27436,1.585)); +#145857 = LINE('',#145858,#145859); +#145858 = CARTESIAN_POINT('',(91.503555,-110.272919,1.585)); +#145859 = VECTOR('',#145860,1.); +#145860 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#145861 = ORIENTED_EDGE('',*,*,#145862,.T.); +#145862 = EDGE_CURVE('',#145855,#145863,#145865,.T.); +#145863 = VERTEX_POINT('',#145864); +#145864 = CARTESIAN_POINT('',(92.148542,-110.523763,1.585)); +#145865 = CIRCLE('',#145866,0.347870264855); +#145866 = AXIS2_PLACEMENT_3D('',#145867,#145868,#145869); +#145867 = CARTESIAN_POINT('',(91.811811265028,-110.6110907349,1.585)); +#145868 = DIRECTION('',(0.,0.,-1.)); +#145869 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#145870 = ORIENTED_EDGE('',*,*,#145871,.T.); +#145871 = EDGE_CURVE('',#145863,#145872,#145874,.T.); +#145872 = VERTEX_POINT('',#145873); +#145873 = CARTESIAN_POINT('',(92.14732,-110.701062,1.585)); +#145874 = LINE('',#145875,#145876); +#145875 = CARTESIAN_POINT('',(92.148542,-110.523763,1.585)); +#145876 = VECTOR('',#145877,1.); +#145877 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#145878 = ORIENTED_EDGE('',*,*,#145879,.T.); +#145879 = EDGE_CURVE('',#145872,#145880,#145882,.T.); +#145880 = VERTEX_POINT('',#145881); +#145881 = CARTESIAN_POINT('',(91.899139,-110.945287,1.585)); +#145882 = CIRCLE('',#145883,0.348632345848); +#145883 = AXIS2_PLACEMENT_3D('',#145884,#145885,#145886); +#145884 = CARTESIAN_POINT('',(91.811370194038,-110.6078834593,1.585)); +#145885 = DIRECTION('',(0.,0.,-1.)); +#145886 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#145887 = ORIENTED_EDGE('',*,*,#145888,.T.); +#145888 = EDGE_CURVE('',#145880,#145889,#145891,.T.); +#145889 = VERTEX_POINT('',#145890); +#145890 = CARTESIAN_POINT('',(91.885622,-110.946618,1.585)); +#145891 = LINE('',#145892,#145893); +#145892 = CARTESIAN_POINT('',(91.899139,-110.945287,1.585)); +#145893 = VECTOR('',#145894,1.); +#145894 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#145895 = ORIENTED_EDGE('',*,*,#145896,.T.); +#145896 = EDGE_CURVE('',#145889,#145897,#145899,.T.); +#145897 = VERTEX_POINT('',#145898); +#145898 = CARTESIAN_POINT('',(92.143636,-111.317723,1.585)); +#145899 = LINE('',#145900,#145901); +#145900 = CARTESIAN_POINT('',(91.885622,-110.946618,1.585)); +#145901 = VECTOR('',#145902,1.); +#145902 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#145903 = ORIENTED_EDGE('',*,*,#145904,.T.); +#145904 = EDGE_CURVE('',#145897,#145905,#145907,.T.); +#145905 = VERTEX_POINT('',#145906); +#145906 = CARTESIAN_POINT('',(92.013541,-111.390929,1.585)); +#145907 = CIRCLE('',#145908,7.500005951702E-02); +#145908 = AXIS2_PLACEMENT_3D('',#145909,#145910,#145911); +#145909 = CARTESIAN_POINT('',(92.074983062942,-111.3479187473,1.585)); +#145910 = DIRECTION('',(0.,0.,-1.)); +#145911 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#145912 = ORIENTED_EDGE('',*,*,#145913,.T.); +#145913 = EDGE_CURVE('',#145905,#145914,#145916,.T.); +#145914 = VERTEX_POINT('',#145915); +#145915 = CARTESIAN_POINT('',(91.702601,-110.946728,1.585)); +#145916 = LINE('',#145917,#145918); +#145917 = CARTESIAN_POINT('',(92.013541,-111.390929,1.585)); +#145918 = VECTOR('',#145919,1.); +#145919 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#145920 = ORIENTED_EDGE('',*,*,#145921,.T.); +#145921 = EDGE_CURVE('',#145914,#145922,#145924,.T.); +#145922 = VERTEX_POINT('',#145923); +#145923 = CARTESIAN_POINT('',(91.578555,-110.946728,1.585)); +#145924 = LINE('',#145925,#145926); +#145925 = CARTESIAN_POINT('',(91.702601,-110.946728,1.585)); +#145926 = VECTOR('',#145927,1.); +#145927 = DIRECTION('',(-1.,0.,0.)); +#145928 = ORIENTED_EDGE('',*,*,#145929,.T.); +#145929 = EDGE_CURVE('',#145922,#145930,#145932,.T.); +#145930 = VERTEX_POINT('',#145931); +#145931 = CARTESIAN_POINT('',(91.577114,-111.362551,1.585)); +#145932 = LINE('',#145933,#145934); +#145933 = CARTESIAN_POINT('',(91.578555,-110.946728,1.585)); +#145934 = VECTOR('',#145935,1.); +#145935 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#145936 = ORIENTED_EDGE('',*,*,#145937,.T.); +#145937 = EDGE_CURVE('',#145930,#145938,#145940,.T.); +#145938 = VERTEX_POINT('',#145939); +#145939 = CARTESIAN_POINT('',(91.428555,-111.347919,1.585)); +#145940 = CIRCLE('',#145941,7.500006711463E-02); +#145941 = AXIS2_PLACEMENT_3D('',#145942,#145943,#145944); +#145942 = CARTESIAN_POINT('',(91.503555067115,-111.3479190671,1.585)); +#145943 = DIRECTION('',(-0.,0.,-1.)); +#145944 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#145945 = ORIENTED_EDGE('',*,*,#145946,.T.); +#145946 = EDGE_CURVE('',#145938,#145844,#145947,.T.); +#145947 = LINE('',#145948,#145949); +#145948 = CARTESIAN_POINT('',(91.428555,-111.347919,1.585)); +#145949 = VECTOR('',#145950,1.); +#145950 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#145951 = FACE_BOUND('',#145952,.F.); +#145952 = EDGE_LOOP('',(#145953,#145964,#145972,#145980,#145988,#145997) + ); +#145953 = ORIENTED_EDGE('',*,*,#145954,.T.); +#145954 = EDGE_CURVE('',#145955,#145957,#145959,.T.); +#145955 = VERTEX_POINT('',#145956); +#145956 = CARTESIAN_POINT('',(91.999983,-110.5561,1.585)); +#145957 = VERTEX_POINT('',#145958); +#145958 = CARTESIAN_POINT('',(91.866802,-110.422919,1.585)); +#145959 = CIRCLE('',#145960,0.18686440374); +#145960 = AXIS2_PLACEMENT_3D('',#145961,#145962,#145963); +#145961 = CARTESIAN_POINT('',(91.819266,-110.603636,1.585)); +#145962 = DIRECTION('',(0.,0.,1.)); +#145963 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#145964 = ORIENTED_EDGE('',*,*,#145965,.T.); +#145965 = EDGE_CURVE('',#145957,#145966,#145968,.T.); +#145966 = VERTEX_POINT('',#145967); +#145967 = CARTESIAN_POINT('',(91.578555,-110.422919,1.585)); +#145968 = LINE('',#145969,#145970); +#145969 = CARTESIAN_POINT('',(91.866802,-110.422919,1.585)); +#145970 = VECTOR('',#145971,1.); +#145971 = DIRECTION('',(-1.,0.,0.)); +#145972 = ORIENTED_EDGE('',*,*,#145973,.T.); +#145973 = EDGE_CURVE('',#145966,#145974,#145976,.T.); +#145974 = VERTEX_POINT('',#145975); +#145975 = CARTESIAN_POINT('',(91.578555,-110.796728,1.585)); +#145976 = LINE('',#145977,#145978); +#145977 = CARTESIAN_POINT('',(91.578555,-110.422919,1.585)); +#145978 = VECTOR('',#145979,1.); +#145979 = DIRECTION('',(0.,-1.,0.)); +#145980 = ORIENTED_EDGE('',*,*,#145981,.T.); +#145981 = EDGE_CURVE('',#145974,#145982,#145984,.T.); +#145982 = VERTEX_POINT('',#145983); +#145983 = CARTESIAN_POINT('',(91.866802,-110.796728,1.585)); +#145984 = LINE('',#145985,#145986); +#145985 = CARTESIAN_POINT('',(91.578555,-110.796728,1.585)); +#145986 = VECTOR('',#145987,1.); +#145987 = DIRECTION('',(1.,0.,0.)); +#145988 = ORIENTED_EDGE('',*,*,#145989,.T.); +#145989 = EDGE_CURVE('',#145982,#145990,#145992,.T.); +#145990 = VERTEX_POINT('',#145991); +#145991 = CARTESIAN_POINT('',(91.999983,-110.663547,1.585)); +#145992 = CIRCLE('',#145993,0.18686440374); +#145993 = AXIS2_PLACEMENT_3D('',#145994,#145995,#145996); +#145994 = CARTESIAN_POINT('',(91.819266,-110.616011,1.585)); +#145995 = DIRECTION('',(0.,0.,1.)); +#145996 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#145997 = ORIENTED_EDGE('',*,*,#145998,.T.); +#145998 = EDGE_CURVE('',#145990,#145955,#145999,.T.); +#145999 = LINE('',#146000,#146001); +#146000 = CARTESIAN_POINT('',(91.999983,-110.663547,1.585)); +#146001 = VECTOR('',#146002,1.); +#146002 = DIRECTION('',(0.,1.,0.)); +#146003 = PLANE('',#146004); +#146004 = AXIS2_PLACEMENT_3D('',#146005,#146006,#146007); +#146005 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146006 = DIRECTION('',(0.,0.,1.)); +#146007 = DIRECTION('',(1.,0.,-0.)); +#146008 = SHELL_BASED_SURFACE_MODEL('',(#146009)); +#146009 = OPEN_SHELL('',(#146010)); +#146010 = ADVANCED_FACE('',(#146011,#146122),#146174,.T.); +#146011 = FACE_BOUND('',#146012,.F.); +#146012 = EDGE_LOOP('',(#146013,#146024,#146032,#146041,#146049,#146058, + #146066,#146074,#146083,#146091,#146099,#146107,#146116)); +#146013 = ORIENTED_EDGE('',*,*,#146014,.T.); +#146014 = EDGE_CURVE('',#146015,#146017,#146019,.T.); +#146015 = VERTEX_POINT('',#146016); +#146016 = CARTESIAN_POINT('',(93.938329,-110.333287,1.585)); +#146017 = VERTEX_POINT('',#146018); +#146018 = CARTESIAN_POINT('',(94.011888,-110.272919,1.585)); +#146019 = CIRCLE('',#146020,7.500074938988E-02); +#146020 = AXIS2_PLACEMENT_3D('',#146021,#146022,#146023); +#146021 = CARTESIAN_POINT('',(94.01188846611,-110.3479197493,1.585)); +#146022 = DIRECTION('',(0.,0.,-1.)); +#146023 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146024 = ORIENTED_EDGE('',*,*,#146025,.T.); +#146025 = EDGE_CURVE('',#146017,#146026,#146028,.T.); +#146026 = VERTEX_POINT('',#146027); +#146027 = CARTESIAN_POINT('',(94.407472,-110.27436,1.585)); +#146028 = LINE('',#146029,#146030); +#146029 = CARTESIAN_POINT('',(94.011888,-110.272919,1.585)); +#146030 = VECTOR('',#146031,1.); +#146031 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146032 = ORIENTED_EDGE('',*,*,#146033,.T.); +#146033 = EDGE_CURVE('',#146026,#146034,#146036,.T.); +#146034 = VERTEX_POINT('',#146035); +#146035 = CARTESIAN_POINT('',(94.656875,-110.523763,1.585)); +#146036 = CIRCLE('',#146037,0.347870264855); +#146037 = AXIS2_PLACEMENT_3D('',#146038,#146039,#146040); +#146038 = CARTESIAN_POINT('',(94.320144265028,-110.6110907349,1.585)); +#146039 = DIRECTION('',(0.,0.,-1.)); +#146040 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146041 = ORIENTED_EDGE('',*,*,#146042,.T.); +#146042 = EDGE_CURVE('',#146034,#146043,#146045,.T.); +#146043 = VERTEX_POINT('',#146044); +#146044 = CARTESIAN_POINT('',(94.655653,-110.701062,1.585)); +#146045 = LINE('',#146046,#146047); +#146046 = CARTESIAN_POINT('',(94.656875,-110.523763,1.585)); +#146047 = VECTOR('',#146048,1.); +#146048 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146049 = ORIENTED_EDGE('',*,*,#146050,.T.); +#146050 = EDGE_CURVE('',#146043,#146051,#146053,.T.); +#146051 = VERTEX_POINT('',#146052); +#146052 = CARTESIAN_POINT('',(94.407472,-110.945287,1.585)); +#146053 = CIRCLE('',#146054,0.348632345848); +#146054 = AXIS2_PLACEMENT_3D('',#146055,#146056,#146057); +#146055 = CARTESIAN_POINT('',(94.319703194037,-110.6078834593,1.585)); +#146056 = DIRECTION('',(0.,0.,-1.)); +#146057 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146058 = ORIENTED_EDGE('',*,*,#146059,.T.); +#146059 = EDGE_CURVE('',#146051,#146060,#146062,.T.); +#146060 = VERTEX_POINT('',#146061); +#146061 = CARTESIAN_POINT('',(94.393955,-110.946618,1.585)); +#146062 = LINE('',#146063,#146064); +#146063 = CARTESIAN_POINT('',(94.407472,-110.945287,1.585)); +#146064 = VECTOR('',#146065,1.); +#146065 = DIRECTION('',(-0.995186940545,-9.799465990037E-02,0.)); +#146066 = ORIENTED_EDGE('',*,*,#146067,.T.); +#146067 = EDGE_CURVE('',#146060,#146068,#146070,.T.); +#146068 = VERTEX_POINT('',#146069); +#146069 = CARTESIAN_POINT('',(94.651969,-111.317723,1.585)); +#146070 = LINE('',#146071,#146072); +#146071 = CARTESIAN_POINT('',(94.393955,-110.946618,1.585)); +#146072 = VECTOR('',#146073,1.); +#146073 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146074 = ORIENTED_EDGE('',*,*,#146075,.T.); +#146075 = EDGE_CURVE('',#146068,#146076,#146078,.T.); +#146076 = VERTEX_POINT('',#146077); +#146077 = CARTESIAN_POINT('',(94.521874,-111.390929,1.585)); +#146078 = CIRCLE('',#146079,7.500005951702E-02); +#146079 = AXIS2_PLACEMENT_3D('',#146080,#146081,#146082); +#146080 = CARTESIAN_POINT('',(94.583316062942,-111.3479187473,1.585)); +#146081 = DIRECTION('',(0.,0.,-1.)); +#146082 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146083 = ORIENTED_EDGE('',*,*,#146084,.T.); +#146084 = EDGE_CURVE('',#146076,#146085,#146087,.T.); +#146085 = VERTEX_POINT('',#146086); +#146086 = CARTESIAN_POINT('',(94.210934,-110.946728,1.585)); +#146087 = LINE('',#146088,#146089); +#146088 = CARTESIAN_POINT('',(94.521874,-111.390929,1.585)); +#146089 = VECTOR('',#146090,1.); +#146090 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146091 = ORIENTED_EDGE('',*,*,#146092,.T.); +#146092 = EDGE_CURVE('',#146085,#146093,#146095,.T.); +#146093 = VERTEX_POINT('',#146094); +#146094 = CARTESIAN_POINT('',(94.086888,-110.946728,1.585)); +#146095 = LINE('',#146096,#146097); +#146096 = CARTESIAN_POINT('',(94.210934,-110.946728,1.585)); +#146097 = VECTOR('',#146098,1.); +#146098 = DIRECTION('',(-1.,0.,0.)); +#146099 = ORIENTED_EDGE('',*,*,#146100,.T.); +#146100 = EDGE_CURVE('',#146093,#146101,#146103,.T.); +#146101 = VERTEX_POINT('',#146102); +#146102 = CARTESIAN_POINT('',(94.085447,-111.362551,1.585)); +#146103 = LINE('',#146104,#146105); +#146104 = CARTESIAN_POINT('',(94.086888,-110.946728,1.585)); +#146105 = VECTOR('',#146106,1.); +#146106 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146107 = ORIENTED_EDGE('',*,*,#146108,.T.); +#146108 = EDGE_CURVE('',#146101,#146109,#146111,.T.); +#146109 = VERTEX_POINT('',#146110); +#146110 = CARTESIAN_POINT('',(93.936888,-111.347919,1.585)); +#146111 = CIRCLE('',#146112,7.500006711464E-02); +#146112 = AXIS2_PLACEMENT_3D('',#146113,#146114,#146115); +#146113 = CARTESIAN_POINT('',(94.011888067115,-111.3479190671,1.585)); +#146114 = DIRECTION('',(-0.,0.,-1.)); +#146115 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146116 = ORIENTED_EDGE('',*,*,#146117,.T.); +#146117 = EDGE_CURVE('',#146109,#146015,#146118,.T.); +#146118 = LINE('',#146119,#146120); +#146119 = CARTESIAN_POINT('',(93.936888,-111.347919,1.585)); +#146120 = VECTOR('',#146121,1.); +#146121 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146122 = FACE_BOUND('',#146123,.F.); +#146123 = EDGE_LOOP('',(#146124,#146135,#146143,#146151,#146159,#146168) + ); +#146124 = ORIENTED_EDGE('',*,*,#146125,.T.); +#146125 = EDGE_CURVE('',#146126,#146128,#146130,.T.); +#146126 = VERTEX_POINT('',#146127); +#146127 = CARTESIAN_POINT('',(94.508316,-110.5561,1.585)); +#146128 = VERTEX_POINT('',#146129); +#146129 = CARTESIAN_POINT('',(94.375135,-110.422919,1.585)); +#146130 = CIRCLE('',#146131,0.18686440374); +#146131 = AXIS2_PLACEMENT_3D('',#146132,#146133,#146134); +#146132 = CARTESIAN_POINT('',(94.327599,-110.603636,1.585)); +#146133 = DIRECTION('',(0.,0.,1.)); +#146134 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146135 = ORIENTED_EDGE('',*,*,#146136,.T.); +#146136 = EDGE_CURVE('',#146128,#146137,#146139,.T.); +#146137 = VERTEX_POINT('',#146138); +#146138 = CARTESIAN_POINT('',(94.086888,-110.422919,1.585)); +#146139 = LINE('',#146140,#146141); +#146140 = CARTESIAN_POINT('',(94.375135,-110.422919,1.585)); +#146141 = VECTOR('',#146142,1.); +#146142 = DIRECTION('',(-1.,0.,0.)); +#146143 = ORIENTED_EDGE('',*,*,#146144,.T.); +#146144 = EDGE_CURVE('',#146137,#146145,#146147,.T.); +#146145 = VERTEX_POINT('',#146146); +#146146 = CARTESIAN_POINT('',(94.086888,-110.796728,1.585)); +#146147 = LINE('',#146148,#146149); +#146148 = CARTESIAN_POINT('',(94.086888,-110.422919,1.585)); +#146149 = VECTOR('',#146150,1.); +#146150 = DIRECTION('',(0.,-1.,0.)); +#146151 = ORIENTED_EDGE('',*,*,#146152,.T.); +#146152 = EDGE_CURVE('',#146145,#146153,#146155,.T.); +#146153 = VERTEX_POINT('',#146154); +#146154 = CARTESIAN_POINT('',(94.375135,-110.796728,1.585)); +#146155 = LINE('',#146156,#146157); +#146156 = CARTESIAN_POINT('',(94.086888,-110.796728,1.585)); +#146157 = VECTOR('',#146158,1.); +#146158 = DIRECTION('',(1.,0.,0.)); +#146159 = ORIENTED_EDGE('',*,*,#146160,.T.); +#146160 = EDGE_CURVE('',#146153,#146161,#146163,.T.); +#146161 = VERTEX_POINT('',#146162); +#146162 = CARTESIAN_POINT('',(94.508316,-110.663547,1.585)); +#146163 = CIRCLE('',#146164,0.18686440374); +#146164 = AXIS2_PLACEMENT_3D('',#146165,#146166,#146167); +#146165 = CARTESIAN_POINT('',(94.327599,-110.616011,1.585)); +#146166 = DIRECTION('',(0.,0.,1.)); +#146167 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146168 = ORIENTED_EDGE('',*,*,#146169,.T.); +#146169 = EDGE_CURVE('',#146161,#146126,#146170,.T.); +#146170 = LINE('',#146171,#146172); +#146171 = CARTESIAN_POINT('',(94.508316,-110.663547,1.585)); +#146172 = VECTOR('',#146173,1.); +#146173 = DIRECTION('',(0.,1.,0.)); +#146174 = PLANE('',#146175); +#146175 = AXIS2_PLACEMENT_3D('',#146176,#146177,#146178); +#146176 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146177 = DIRECTION('',(0.,0.,1.)); +#146178 = DIRECTION('',(1.,0.,-0.)); +#146179 = SHELL_BASED_SURFACE_MODEL('',(#146180)); +#146180 = OPEN_SHELL('',(#146181)); +#146181 = ADVANCED_FACE('',(#146182,#146293),#146345,.T.); +#146182 = FACE_BOUND('',#146183,.F.); +#146183 = EDGE_LOOP('',(#146184,#146195,#146203,#146212,#146220,#146229, + #146237,#146245,#146254,#146262,#146270,#146278,#146287)); +#146184 = ORIENTED_EDGE('',*,*,#146185,.T.); +#146185 = EDGE_CURVE('',#146186,#146188,#146190,.T.); +#146186 = VERTEX_POINT('',#146187); +#146187 = CARTESIAN_POINT('',(97.929996,-110.333287,1.585)); +#146188 = VERTEX_POINT('',#146189); +#146189 = CARTESIAN_POINT('',(98.003555,-110.272919,1.585)); +#146190 = CIRCLE('',#146191,7.500074938983E-02); +#146191 = AXIS2_PLACEMENT_3D('',#146192,#146193,#146194); +#146192 = CARTESIAN_POINT('',(98.00355546611,-110.3479197493,1.585)); +#146193 = DIRECTION('',(0.,0.,-1.)); +#146194 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#146195 = ORIENTED_EDGE('',*,*,#146196,.T.); +#146196 = EDGE_CURVE('',#146188,#146197,#146199,.T.); +#146197 = VERTEX_POINT('',#146198); +#146198 = CARTESIAN_POINT('',(98.399139,-110.27436,1.585)); +#146199 = LINE('',#146200,#146201); +#146200 = CARTESIAN_POINT('',(98.003555,-110.272919,1.585)); +#146201 = VECTOR('',#146202,1.); +#146202 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146203 = ORIENTED_EDGE('',*,*,#146204,.T.); +#146204 = EDGE_CURVE('',#146197,#146205,#146207,.T.); +#146205 = VERTEX_POINT('',#146206); +#146206 = CARTESIAN_POINT('',(98.648542,-110.523763,1.585)); +#146207 = CIRCLE('',#146208,0.347870264855); +#146208 = AXIS2_PLACEMENT_3D('',#146209,#146210,#146211); +#146209 = CARTESIAN_POINT('',(98.311811265028,-110.6110907349,1.585)); +#146210 = DIRECTION('',(0.,0.,-1.)); +#146211 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146212 = ORIENTED_EDGE('',*,*,#146213,.T.); +#146213 = EDGE_CURVE('',#146205,#146214,#146216,.T.); +#146214 = VERTEX_POINT('',#146215); +#146215 = CARTESIAN_POINT('',(98.64732,-110.701062,1.585)); +#146216 = LINE('',#146217,#146218); +#146217 = CARTESIAN_POINT('',(98.648542,-110.523763,1.585)); +#146218 = VECTOR('',#146219,1.); +#146219 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#146220 = ORIENTED_EDGE('',*,*,#146221,.T.); +#146221 = EDGE_CURVE('',#146214,#146222,#146224,.T.); +#146222 = VERTEX_POINT('',#146223); +#146223 = CARTESIAN_POINT('',(98.399139,-110.945287,1.585)); +#146224 = CIRCLE('',#146225,0.348632345848); +#146225 = AXIS2_PLACEMENT_3D('',#146226,#146227,#146228); +#146226 = CARTESIAN_POINT('',(98.311370194038,-110.6078834593,1.585)); +#146227 = DIRECTION('',(0.,0.,-1.)); +#146228 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146229 = ORIENTED_EDGE('',*,*,#146230,.T.); +#146230 = EDGE_CURVE('',#146222,#146231,#146233,.T.); +#146231 = VERTEX_POINT('',#146232); +#146232 = CARTESIAN_POINT('',(98.385622,-110.946618,1.585)); +#146233 = LINE('',#146234,#146235); +#146234 = CARTESIAN_POINT('',(98.399139,-110.945287,1.585)); +#146235 = VECTOR('',#146236,1.); +#146236 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146237 = ORIENTED_EDGE('',*,*,#146238,.T.); +#146238 = EDGE_CURVE('',#146231,#146239,#146241,.T.); +#146239 = VERTEX_POINT('',#146240); +#146240 = CARTESIAN_POINT('',(98.643636,-111.317723,1.585)); +#146241 = LINE('',#146242,#146243); +#146242 = CARTESIAN_POINT('',(98.385622,-110.946618,1.585)); +#146243 = VECTOR('',#146244,1.); +#146244 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146245 = ORIENTED_EDGE('',*,*,#146246,.T.); +#146246 = EDGE_CURVE('',#146239,#146247,#146249,.T.); +#146247 = VERTEX_POINT('',#146248); +#146248 = CARTESIAN_POINT('',(98.513541,-111.390929,1.585)); +#146249 = CIRCLE('',#146250,7.500005951702E-02); +#146250 = AXIS2_PLACEMENT_3D('',#146251,#146252,#146253); +#146251 = CARTESIAN_POINT('',(98.574983062942,-111.3479187473,1.585)); +#146252 = DIRECTION('',(0.,0.,-1.)); +#146253 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146254 = ORIENTED_EDGE('',*,*,#146255,.T.); +#146255 = EDGE_CURVE('',#146247,#146256,#146258,.T.); +#146256 = VERTEX_POINT('',#146257); +#146257 = CARTESIAN_POINT('',(98.202601,-110.946728,1.585)); +#146258 = LINE('',#146259,#146260); +#146259 = CARTESIAN_POINT('',(98.513541,-111.390929,1.585)); +#146260 = VECTOR('',#146261,1.); +#146261 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146262 = ORIENTED_EDGE('',*,*,#146263,.T.); +#146263 = EDGE_CURVE('',#146256,#146264,#146266,.T.); +#146264 = VERTEX_POINT('',#146265); +#146265 = CARTESIAN_POINT('',(98.078555,-110.946728,1.585)); +#146266 = LINE('',#146267,#146268); +#146267 = CARTESIAN_POINT('',(98.202601,-110.946728,1.585)); +#146268 = VECTOR('',#146269,1.); +#146269 = DIRECTION('',(-1.,0.,0.)); +#146270 = ORIENTED_EDGE('',*,*,#146271,.T.); +#146271 = EDGE_CURVE('',#146264,#146272,#146274,.T.); +#146272 = VERTEX_POINT('',#146273); +#146273 = CARTESIAN_POINT('',(98.077114,-111.362551,1.585)); +#146274 = LINE('',#146275,#146276); +#146275 = CARTESIAN_POINT('',(98.078555,-110.946728,1.585)); +#146276 = VECTOR('',#146277,1.); +#146277 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146278 = ORIENTED_EDGE('',*,*,#146279,.T.); +#146279 = EDGE_CURVE('',#146272,#146280,#146282,.T.); +#146280 = VERTEX_POINT('',#146281); +#146281 = CARTESIAN_POINT('',(97.928555,-111.347919,1.585)); +#146282 = CIRCLE('',#146283,7.500006711463E-02); +#146283 = AXIS2_PLACEMENT_3D('',#146284,#146285,#146286); +#146284 = CARTESIAN_POINT('',(98.003555067115,-111.3479190671,1.585)); +#146285 = DIRECTION('',(-0.,0.,-1.)); +#146286 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146287 = ORIENTED_EDGE('',*,*,#146288,.T.); +#146288 = EDGE_CURVE('',#146280,#146186,#146289,.T.); +#146289 = LINE('',#146290,#146291); +#146290 = CARTESIAN_POINT('',(97.928555,-111.347919,1.585)); +#146291 = VECTOR('',#146292,1.); +#146292 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146293 = FACE_BOUND('',#146294,.F.); +#146294 = EDGE_LOOP('',(#146295,#146306,#146314,#146322,#146330,#146339) + ); +#146295 = ORIENTED_EDGE('',*,*,#146296,.T.); +#146296 = EDGE_CURVE('',#146297,#146299,#146301,.T.); +#146297 = VERTEX_POINT('',#146298); +#146298 = CARTESIAN_POINT('',(98.499983,-110.5561,1.585)); +#146299 = VERTEX_POINT('',#146300); +#146300 = CARTESIAN_POINT('',(98.366802,-110.422919,1.585)); +#146301 = CIRCLE('',#146302,0.18686440374); +#146302 = AXIS2_PLACEMENT_3D('',#146303,#146304,#146305); +#146303 = CARTESIAN_POINT('',(98.319266,-110.603636,1.585)); +#146304 = DIRECTION('',(0.,0.,1.)); +#146305 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146306 = ORIENTED_EDGE('',*,*,#146307,.T.); +#146307 = EDGE_CURVE('',#146299,#146308,#146310,.T.); +#146308 = VERTEX_POINT('',#146309); +#146309 = CARTESIAN_POINT('',(98.078555,-110.422919,1.585)); +#146310 = LINE('',#146311,#146312); +#146311 = CARTESIAN_POINT('',(98.366802,-110.422919,1.585)); +#146312 = VECTOR('',#146313,1.); +#146313 = DIRECTION('',(-1.,0.,0.)); +#146314 = ORIENTED_EDGE('',*,*,#146315,.T.); +#146315 = EDGE_CURVE('',#146308,#146316,#146318,.T.); +#146316 = VERTEX_POINT('',#146317); +#146317 = CARTESIAN_POINT('',(98.078555,-110.796728,1.585)); +#146318 = LINE('',#146319,#146320); +#146319 = CARTESIAN_POINT('',(98.078555,-110.422919,1.585)); +#146320 = VECTOR('',#146321,1.); +#146321 = DIRECTION('',(0.,-1.,0.)); +#146322 = ORIENTED_EDGE('',*,*,#146323,.T.); +#146323 = EDGE_CURVE('',#146316,#146324,#146326,.T.); +#146324 = VERTEX_POINT('',#146325); +#146325 = CARTESIAN_POINT('',(98.366802,-110.796728,1.585)); +#146326 = LINE('',#146327,#146328); +#146327 = CARTESIAN_POINT('',(98.078555,-110.796728,1.585)); +#146328 = VECTOR('',#146329,1.); +#146329 = DIRECTION('',(1.,0.,0.)); +#146330 = ORIENTED_EDGE('',*,*,#146331,.T.); +#146331 = EDGE_CURVE('',#146324,#146332,#146334,.T.); +#146332 = VERTEX_POINT('',#146333); +#146333 = CARTESIAN_POINT('',(98.499983,-110.663547,1.585)); +#146334 = CIRCLE('',#146335,0.18686440374); +#146335 = AXIS2_PLACEMENT_3D('',#146336,#146337,#146338); +#146336 = CARTESIAN_POINT('',(98.319266,-110.616011,1.585)); +#146337 = DIRECTION('',(0.,0.,1.)); +#146338 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146339 = ORIENTED_EDGE('',*,*,#146340,.T.); +#146340 = EDGE_CURVE('',#146332,#146297,#146341,.T.); +#146341 = LINE('',#146342,#146343); +#146342 = CARTESIAN_POINT('',(98.499983,-110.663547,1.585)); +#146343 = VECTOR('',#146344,1.); +#146344 = DIRECTION('',(0.,1.,0.)); +#146345 = PLANE('',#146346); +#146346 = AXIS2_PLACEMENT_3D('',#146347,#146348,#146349); +#146347 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146348 = DIRECTION('',(0.,0.,1.)); +#146349 = DIRECTION('',(1.,0.,-0.)); +#146350 = SHELL_BASED_SURFACE_MODEL('',(#146351)); +#146351 = OPEN_SHELL('',(#146352)); +#146352 = ADVANCED_FACE('',(#146353,#146464),#146516,.T.); +#146353 = FACE_BOUND('',#146354,.F.); +#146354 = EDGE_LOOP('',(#146355,#146366,#146374,#146383,#146391,#146400, + #146408,#146416,#146425,#146433,#146441,#146449,#146458)); +#146355 = ORIENTED_EDGE('',*,*,#146356,.T.); +#146356 = EDGE_CURVE('',#146357,#146359,#146361,.T.); +#146357 = VERTEX_POINT('',#146358); +#146358 = CARTESIAN_POINT('',(102.104996,-110.333287,1.585)); +#146359 = VERTEX_POINT('',#146360); +#146360 = CARTESIAN_POINT('',(102.178555,-110.272919,1.585)); +#146361 = CIRCLE('',#146362,7.500074938989E-02); +#146362 = AXIS2_PLACEMENT_3D('',#146363,#146364,#146365); +#146363 = CARTESIAN_POINT('',(102.17855546611,-110.3479197493,1.585)); +#146364 = DIRECTION('',(0.,0.,-1.)); +#146365 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146366 = ORIENTED_EDGE('',*,*,#146367,.T.); +#146367 = EDGE_CURVE('',#146359,#146368,#146370,.T.); +#146368 = VERTEX_POINT('',#146369); +#146369 = CARTESIAN_POINT('',(102.574139,-110.27436,1.585)); +#146370 = LINE('',#146371,#146372); +#146371 = CARTESIAN_POINT('',(102.178555,-110.272919,1.585)); +#146372 = VECTOR('',#146373,1.); +#146373 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146374 = ORIENTED_EDGE('',*,*,#146375,.T.); +#146375 = EDGE_CURVE('',#146368,#146376,#146378,.T.); +#146376 = VERTEX_POINT('',#146377); +#146377 = CARTESIAN_POINT('',(102.823542,-110.523763,1.585)); +#146378 = CIRCLE('',#146379,0.347870264855); +#146379 = AXIS2_PLACEMENT_3D('',#146380,#146381,#146382); +#146380 = CARTESIAN_POINT('',(102.48681126502,-110.6110907349,1.585)); +#146381 = DIRECTION('',(0.,0.,-1.)); +#146382 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146383 = ORIENTED_EDGE('',*,*,#146384,.T.); +#146384 = EDGE_CURVE('',#146376,#146385,#146387,.T.); +#146385 = VERTEX_POINT('',#146386); +#146386 = CARTESIAN_POINT('',(102.82232,-110.701062,1.585)); +#146387 = LINE('',#146388,#146389); +#146388 = CARTESIAN_POINT('',(102.823542,-110.523763,1.585)); +#146389 = VECTOR('',#146390,1.); +#146390 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146391 = ORIENTED_EDGE('',*,*,#146392,.T.); +#146392 = EDGE_CURVE('',#146385,#146393,#146395,.T.); +#146393 = VERTEX_POINT('',#146394); +#146394 = CARTESIAN_POINT('',(102.574139,-110.945287,1.585)); +#146395 = CIRCLE('',#146396,0.348632345849); +#146396 = AXIS2_PLACEMENT_3D('',#146397,#146398,#146399); +#146397 = CARTESIAN_POINT('',(102.48637019403,-110.6078834593,1.585)); +#146398 = DIRECTION('',(0.,0.,-1.)); +#146399 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146400 = ORIENTED_EDGE('',*,*,#146401,.T.); +#146401 = EDGE_CURVE('',#146393,#146402,#146404,.T.); +#146402 = VERTEX_POINT('',#146403); +#146403 = CARTESIAN_POINT('',(102.560622,-110.946618,1.585)); +#146404 = LINE('',#146405,#146406); +#146405 = CARTESIAN_POINT('',(102.574139,-110.945287,1.585)); +#146406 = VECTOR('',#146407,1.); +#146407 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146408 = ORIENTED_EDGE('',*,*,#146409,.T.); +#146409 = EDGE_CURVE('',#146402,#146410,#146412,.T.); +#146410 = VERTEX_POINT('',#146411); +#146411 = CARTESIAN_POINT('',(102.818636,-111.317723,1.585)); +#146412 = LINE('',#146413,#146414); +#146413 = CARTESIAN_POINT('',(102.560622,-110.946618,1.585)); +#146414 = VECTOR('',#146415,1.); +#146415 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146416 = ORIENTED_EDGE('',*,*,#146417,.T.); +#146417 = EDGE_CURVE('',#146410,#146418,#146420,.T.); +#146418 = VERTEX_POINT('',#146419); +#146419 = CARTESIAN_POINT('',(102.688541,-111.390929,1.585)); +#146420 = CIRCLE('',#146421,7.500005951702E-02); +#146421 = AXIS2_PLACEMENT_3D('',#146422,#146423,#146424); +#146422 = CARTESIAN_POINT('',(102.74998306294,-111.3479187473,1.585)); +#146423 = DIRECTION('',(0.,0.,-1.)); +#146424 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146425 = ORIENTED_EDGE('',*,*,#146426,.T.); +#146426 = EDGE_CURVE('',#146418,#146427,#146429,.T.); +#146427 = VERTEX_POINT('',#146428); +#146428 = CARTESIAN_POINT('',(102.377601,-110.946728,1.585)); +#146429 = LINE('',#146430,#146431); +#146430 = CARTESIAN_POINT('',(102.688541,-111.390929,1.585)); +#146431 = VECTOR('',#146432,1.); +#146432 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146433 = ORIENTED_EDGE('',*,*,#146434,.T.); +#146434 = EDGE_CURVE('',#146427,#146435,#146437,.T.); +#146435 = VERTEX_POINT('',#146436); +#146436 = CARTESIAN_POINT('',(102.253555,-110.946728,1.585)); +#146437 = LINE('',#146438,#146439); +#146438 = CARTESIAN_POINT('',(102.377601,-110.946728,1.585)); +#146439 = VECTOR('',#146440,1.); +#146440 = DIRECTION('',(-1.,0.,0.)); +#146441 = ORIENTED_EDGE('',*,*,#146442,.T.); +#146442 = EDGE_CURVE('',#146435,#146443,#146445,.T.); +#146443 = VERTEX_POINT('',#146444); +#146444 = CARTESIAN_POINT('',(102.252114,-111.362551,1.585)); +#146445 = LINE('',#146446,#146447); +#146446 = CARTESIAN_POINT('',(102.253555,-110.946728,1.585)); +#146447 = VECTOR('',#146448,1.); +#146448 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146449 = ORIENTED_EDGE('',*,*,#146450,.T.); +#146450 = EDGE_CURVE('',#146443,#146451,#146453,.T.); +#146451 = VERTEX_POINT('',#146452); +#146452 = CARTESIAN_POINT('',(102.103555,-111.347919,1.585)); +#146453 = CIRCLE('',#146454,7.500006711464E-02); +#146454 = AXIS2_PLACEMENT_3D('',#146455,#146456,#146457); +#146455 = CARTESIAN_POINT('',(102.17855506711,-111.3479190671,1.585)); +#146456 = DIRECTION('',(-0.,0.,-1.)); +#146457 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146458 = ORIENTED_EDGE('',*,*,#146459,.T.); +#146459 = EDGE_CURVE('',#146451,#146357,#146460,.T.); +#146460 = LINE('',#146461,#146462); +#146461 = CARTESIAN_POINT('',(102.103555,-111.347919,1.585)); +#146462 = VECTOR('',#146463,1.); +#146463 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146464 = FACE_BOUND('',#146465,.F.); +#146465 = EDGE_LOOP('',(#146466,#146477,#146485,#146493,#146501,#146510) + ); +#146466 = ORIENTED_EDGE('',*,*,#146467,.T.); +#146467 = EDGE_CURVE('',#146468,#146470,#146472,.T.); +#146468 = VERTEX_POINT('',#146469); +#146469 = CARTESIAN_POINT('',(102.674983,-110.5561,1.585)); +#146470 = VERTEX_POINT('',#146471); +#146471 = CARTESIAN_POINT('',(102.541802,-110.422919,1.585)); +#146472 = CIRCLE('',#146473,0.18686440374); +#146473 = AXIS2_PLACEMENT_3D('',#146474,#146475,#146476); +#146474 = CARTESIAN_POINT('',(102.494266,-110.603636,1.585)); +#146475 = DIRECTION('',(0.,0.,1.)); +#146476 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146477 = ORIENTED_EDGE('',*,*,#146478,.T.); +#146478 = EDGE_CURVE('',#146470,#146479,#146481,.T.); +#146479 = VERTEX_POINT('',#146480); +#146480 = CARTESIAN_POINT('',(102.253555,-110.422919,1.585)); +#146481 = LINE('',#146482,#146483); +#146482 = CARTESIAN_POINT('',(102.541802,-110.422919,1.585)); +#146483 = VECTOR('',#146484,1.); +#146484 = DIRECTION('',(-1.,0.,0.)); +#146485 = ORIENTED_EDGE('',*,*,#146486,.T.); +#146486 = EDGE_CURVE('',#146479,#146487,#146489,.T.); +#146487 = VERTEX_POINT('',#146488); +#146488 = CARTESIAN_POINT('',(102.253555,-110.796728,1.585)); +#146489 = LINE('',#146490,#146491); +#146490 = CARTESIAN_POINT('',(102.253555,-110.422919,1.585)); +#146491 = VECTOR('',#146492,1.); +#146492 = DIRECTION('',(0.,-1.,0.)); +#146493 = ORIENTED_EDGE('',*,*,#146494,.T.); +#146494 = EDGE_CURVE('',#146487,#146495,#146497,.T.); +#146495 = VERTEX_POINT('',#146496); +#146496 = CARTESIAN_POINT('',(102.541802,-110.796728,1.585)); +#146497 = LINE('',#146498,#146499); +#146498 = CARTESIAN_POINT('',(102.253555,-110.796728,1.585)); +#146499 = VECTOR('',#146500,1.); +#146500 = DIRECTION('',(1.,0.,0.)); +#146501 = ORIENTED_EDGE('',*,*,#146502,.T.); +#146502 = EDGE_CURVE('',#146495,#146503,#146505,.T.); +#146503 = VERTEX_POINT('',#146504); +#146504 = CARTESIAN_POINT('',(102.674983,-110.663547,1.585)); +#146505 = CIRCLE('',#146506,0.18686440374); +#146506 = AXIS2_PLACEMENT_3D('',#146507,#146508,#146509); +#146507 = CARTESIAN_POINT('',(102.494266,-110.616011,1.585)); +#146508 = DIRECTION('',(0.,0.,1.)); +#146509 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146510 = ORIENTED_EDGE('',*,*,#146511,.T.); +#146511 = EDGE_CURVE('',#146503,#146468,#146512,.T.); +#146512 = LINE('',#146513,#146514); +#146513 = CARTESIAN_POINT('',(102.674983,-110.663547,1.585)); +#146514 = VECTOR('',#146515,1.); +#146515 = DIRECTION('',(0.,1.,0.)); +#146516 = PLANE('',#146517); +#146517 = AXIS2_PLACEMENT_3D('',#146518,#146519,#146520); +#146518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146519 = DIRECTION('',(0.,0.,1.)); +#146520 = DIRECTION('',(1.,0.,-0.)); +#146521 = SHELL_BASED_SURFACE_MODEL('',(#146522)); +#146522 = OPEN_SHELL('',(#146523)); +#146523 = ADVANCED_FACE('',(#146524,#146635),#146687,.T.); +#146524 = FACE_BOUND('',#146525,.F.); +#146525 = EDGE_LOOP('',(#146526,#146537,#146545,#146554,#146562,#146571, + #146579,#146587,#146596,#146604,#146612,#146620,#146629)); +#146526 = ORIENTED_EDGE('',*,*,#146527,.T.); +#146527 = EDGE_CURVE('',#146528,#146530,#146532,.T.); +#146528 = VERTEX_POINT('',#146529); +#146529 = CARTESIAN_POINT('',(106.104996,-110.333287,1.585)); +#146530 = VERTEX_POINT('',#146531); +#146531 = CARTESIAN_POINT('',(106.178555,-110.272919,1.585)); +#146532 = CIRCLE('',#146533,7.500074938989E-02); +#146533 = AXIS2_PLACEMENT_3D('',#146534,#146535,#146536); +#146534 = CARTESIAN_POINT('',(106.17855546611,-110.3479197493,1.585)); +#146535 = DIRECTION('',(0.,0.,-1.)); +#146536 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146537 = ORIENTED_EDGE('',*,*,#146538,.T.); +#146538 = EDGE_CURVE('',#146530,#146539,#146541,.T.); +#146539 = VERTEX_POINT('',#146540); +#146540 = CARTESIAN_POINT('',(106.574139,-110.27436,1.585)); +#146541 = LINE('',#146542,#146543); +#146542 = CARTESIAN_POINT('',(106.178555,-110.272919,1.585)); +#146543 = VECTOR('',#146544,1.); +#146544 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146545 = ORIENTED_EDGE('',*,*,#146546,.T.); +#146546 = EDGE_CURVE('',#146539,#146547,#146549,.T.); +#146547 = VERTEX_POINT('',#146548); +#146548 = CARTESIAN_POINT('',(106.823542,-110.523763,1.585)); +#146549 = CIRCLE('',#146550,0.347870264855); +#146550 = AXIS2_PLACEMENT_3D('',#146551,#146552,#146553); +#146551 = CARTESIAN_POINT('',(106.48681126502,-110.6110907349,1.585)); +#146552 = DIRECTION('',(0.,0.,-1.)); +#146553 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146554 = ORIENTED_EDGE('',*,*,#146555,.T.); +#146555 = EDGE_CURVE('',#146547,#146556,#146558,.T.); +#146556 = VERTEX_POINT('',#146557); +#146557 = CARTESIAN_POINT('',(106.82232,-110.701062,1.585)); +#146558 = LINE('',#146559,#146560); +#146559 = CARTESIAN_POINT('',(106.823542,-110.523763,1.585)); +#146560 = VECTOR('',#146561,1.); +#146561 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146562 = ORIENTED_EDGE('',*,*,#146563,.T.); +#146563 = EDGE_CURVE('',#146556,#146564,#146566,.T.); +#146564 = VERTEX_POINT('',#146565); +#146565 = CARTESIAN_POINT('',(106.574139,-110.945287,1.585)); +#146566 = CIRCLE('',#146567,0.348632345849); +#146567 = AXIS2_PLACEMENT_3D('',#146568,#146569,#146570); +#146568 = CARTESIAN_POINT('',(106.48637019403,-110.6078834593,1.585)); +#146569 = DIRECTION('',(0.,0.,-1.)); +#146570 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146571 = ORIENTED_EDGE('',*,*,#146572,.T.); +#146572 = EDGE_CURVE('',#146564,#146573,#146575,.T.); +#146573 = VERTEX_POINT('',#146574); +#146574 = CARTESIAN_POINT('',(106.560622,-110.946618,1.585)); +#146575 = LINE('',#146576,#146577); +#146576 = CARTESIAN_POINT('',(106.574139,-110.945287,1.585)); +#146577 = VECTOR('',#146578,1.); +#146578 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146579 = ORIENTED_EDGE('',*,*,#146580,.T.); +#146580 = EDGE_CURVE('',#146573,#146581,#146583,.T.); +#146581 = VERTEX_POINT('',#146582); +#146582 = CARTESIAN_POINT('',(106.818636,-111.317723,1.585)); +#146583 = LINE('',#146584,#146585); +#146584 = CARTESIAN_POINT('',(106.560622,-110.946618,1.585)); +#146585 = VECTOR('',#146586,1.); +#146586 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146587 = ORIENTED_EDGE('',*,*,#146588,.T.); +#146588 = EDGE_CURVE('',#146581,#146589,#146591,.T.); +#146589 = VERTEX_POINT('',#146590); +#146590 = CARTESIAN_POINT('',(106.688541,-111.390929,1.585)); +#146591 = CIRCLE('',#146592,7.500005951702E-02); +#146592 = AXIS2_PLACEMENT_3D('',#146593,#146594,#146595); +#146593 = CARTESIAN_POINT('',(106.74998306294,-111.3479187473,1.585)); +#146594 = DIRECTION('',(0.,0.,-1.)); +#146595 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146596 = ORIENTED_EDGE('',*,*,#146597,.T.); +#146597 = EDGE_CURVE('',#146589,#146598,#146600,.T.); +#146598 = VERTEX_POINT('',#146599); +#146599 = CARTESIAN_POINT('',(106.377601,-110.946728,1.585)); +#146600 = LINE('',#146601,#146602); +#146601 = CARTESIAN_POINT('',(106.688541,-111.390929,1.585)); +#146602 = VECTOR('',#146603,1.); +#146603 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146604 = ORIENTED_EDGE('',*,*,#146605,.T.); +#146605 = EDGE_CURVE('',#146598,#146606,#146608,.T.); +#146606 = VERTEX_POINT('',#146607); +#146607 = CARTESIAN_POINT('',(106.253555,-110.946728,1.585)); +#146608 = LINE('',#146609,#146610); +#146609 = CARTESIAN_POINT('',(106.377601,-110.946728,1.585)); +#146610 = VECTOR('',#146611,1.); +#146611 = DIRECTION('',(-1.,0.,0.)); +#146612 = ORIENTED_EDGE('',*,*,#146613,.T.); +#146613 = EDGE_CURVE('',#146606,#146614,#146616,.T.); +#146614 = VERTEX_POINT('',#146615); +#146615 = CARTESIAN_POINT('',(106.252114,-111.362551,1.585)); +#146616 = LINE('',#146617,#146618); +#146617 = CARTESIAN_POINT('',(106.253555,-110.946728,1.585)); +#146618 = VECTOR('',#146619,1.); +#146619 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146620 = ORIENTED_EDGE('',*,*,#146621,.T.); +#146621 = EDGE_CURVE('',#146614,#146622,#146624,.T.); +#146622 = VERTEX_POINT('',#146623); +#146623 = CARTESIAN_POINT('',(106.103555,-111.347919,1.585)); +#146624 = CIRCLE('',#146625,7.500006711464E-02); +#146625 = AXIS2_PLACEMENT_3D('',#146626,#146627,#146628); +#146626 = CARTESIAN_POINT('',(106.17855506711,-111.3479190671,1.585)); +#146627 = DIRECTION('',(-0.,0.,-1.)); +#146628 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146629 = ORIENTED_EDGE('',*,*,#146630,.T.); +#146630 = EDGE_CURVE('',#146622,#146528,#146631,.T.); +#146631 = LINE('',#146632,#146633); +#146632 = CARTESIAN_POINT('',(106.103555,-111.347919,1.585)); +#146633 = VECTOR('',#146634,1.); +#146634 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146635 = FACE_BOUND('',#146636,.F.); +#146636 = EDGE_LOOP('',(#146637,#146648,#146656,#146664,#146672,#146681) + ); +#146637 = ORIENTED_EDGE('',*,*,#146638,.T.); +#146638 = EDGE_CURVE('',#146639,#146641,#146643,.T.); +#146639 = VERTEX_POINT('',#146640); +#146640 = CARTESIAN_POINT('',(106.674983,-110.5561,1.585)); +#146641 = VERTEX_POINT('',#146642); +#146642 = CARTESIAN_POINT('',(106.541802,-110.422919,1.585)); +#146643 = CIRCLE('',#146644,0.18686440374); +#146644 = AXIS2_PLACEMENT_3D('',#146645,#146646,#146647); +#146645 = CARTESIAN_POINT('',(106.494266,-110.603636,1.585)); +#146646 = DIRECTION('',(0.,0.,1.)); +#146647 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146648 = ORIENTED_EDGE('',*,*,#146649,.T.); +#146649 = EDGE_CURVE('',#146641,#146650,#146652,.T.); +#146650 = VERTEX_POINT('',#146651); +#146651 = CARTESIAN_POINT('',(106.253555,-110.422919,1.585)); +#146652 = LINE('',#146653,#146654); +#146653 = CARTESIAN_POINT('',(106.541802,-110.422919,1.585)); +#146654 = VECTOR('',#146655,1.); +#146655 = DIRECTION('',(-1.,0.,0.)); +#146656 = ORIENTED_EDGE('',*,*,#146657,.T.); +#146657 = EDGE_CURVE('',#146650,#146658,#146660,.T.); +#146658 = VERTEX_POINT('',#146659); +#146659 = CARTESIAN_POINT('',(106.253555,-110.796728,1.585)); +#146660 = LINE('',#146661,#146662); +#146661 = CARTESIAN_POINT('',(106.253555,-110.422919,1.585)); +#146662 = VECTOR('',#146663,1.); +#146663 = DIRECTION('',(0.,-1.,0.)); +#146664 = ORIENTED_EDGE('',*,*,#146665,.T.); +#146665 = EDGE_CURVE('',#146658,#146666,#146668,.T.); +#146666 = VERTEX_POINT('',#146667); +#146667 = CARTESIAN_POINT('',(106.541802,-110.796728,1.585)); +#146668 = LINE('',#146669,#146670); +#146669 = CARTESIAN_POINT('',(106.253555,-110.796728,1.585)); +#146670 = VECTOR('',#146671,1.); +#146671 = DIRECTION('',(1.,0.,0.)); +#146672 = ORIENTED_EDGE('',*,*,#146673,.T.); +#146673 = EDGE_CURVE('',#146666,#146674,#146676,.T.); +#146674 = VERTEX_POINT('',#146675); +#146675 = CARTESIAN_POINT('',(106.674983,-110.663547,1.585)); +#146676 = CIRCLE('',#146677,0.18686440374); +#146677 = AXIS2_PLACEMENT_3D('',#146678,#146679,#146680); +#146678 = CARTESIAN_POINT('',(106.494266,-110.616011,1.585)); +#146679 = DIRECTION('',(0.,0.,1.)); +#146680 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146681 = ORIENTED_EDGE('',*,*,#146682,.T.); +#146682 = EDGE_CURVE('',#146674,#146639,#146683,.T.); +#146683 = LINE('',#146684,#146685); +#146684 = CARTESIAN_POINT('',(106.674983,-110.663547,1.585)); +#146685 = VECTOR('',#146686,1.); +#146686 = DIRECTION('',(0.,1.,0.)); +#146687 = PLANE('',#146688); +#146688 = AXIS2_PLACEMENT_3D('',#146689,#146690,#146691); +#146689 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146690 = DIRECTION('',(0.,0.,1.)); +#146691 = DIRECTION('',(1.,0.,-0.)); +#146692 = SHELL_BASED_SURFACE_MODEL('',(#146693)); +#146693 = OPEN_SHELL('',(#146694)); +#146694 = ADVANCED_FACE('',(#146695,#146806),#146858,.T.); +#146695 = FACE_BOUND('',#146696,.F.); +#146696 = EDGE_LOOP('',(#146697,#146708,#146716,#146725,#146733,#146742, + #146750,#146758,#146767,#146775,#146783,#146791,#146800)); +#146697 = ORIENTED_EDGE('',*,*,#146698,.T.); +#146698 = EDGE_CURVE('',#146699,#146701,#146703,.T.); +#146699 = VERTEX_POINT('',#146700); +#146700 = CARTESIAN_POINT('',(109.39071,-110.333287,1.585)); +#146701 = VERTEX_POINT('',#146702); +#146702 = CARTESIAN_POINT('',(109.464269,-110.272919,1.585)); +#146703 = CIRCLE('',#146704,7.500074938988E-02); +#146704 = AXIS2_PLACEMENT_3D('',#146705,#146706,#146707); +#146705 = CARTESIAN_POINT('',(109.46426946611,-110.3479197493,1.585)); +#146706 = DIRECTION('',(0.,0.,-1.)); +#146707 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146708 = ORIENTED_EDGE('',*,*,#146709,.T.); +#146709 = EDGE_CURVE('',#146701,#146710,#146712,.T.); +#146710 = VERTEX_POINT('',#146711); +#146711 = CARTESIAN_POINT('',(109.859853,-110.27436,1.585)); +#146712 = LINE('',#146713,#146714); +#146713 = CARTESIAN_POINT('',(109.464269,-110.272919,1.585)); +#146714 = VECTOR('',#146715,1.); +#146715 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146716 = ORIENTED_EDGE('',*,*,#146717,.T.); +#146717 = EDGE_CURVE('',#146710,#146718,#146720,.T.); +#146718 = VERTEX_POINT('',#146719); +#146719 = CARTESIAN_POINT('',(110.109256,-110.523763,1.585)); +#146720 = CIRCLE('',#146721,0.347870264855); +#146721 = AXIS2_PLACEMENT_3D('',#146722,#146723,#146724); +#146722 = CARTESIAN_POINT('',(109.77252526502,-110.6110907349,1.585)); +#146723 = DIRECTION('',(0.,0.,-1.)); +#146724 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146725 = ORIENTED_EDGE('',*,*,#146726,.T.); +#146726 = EDGE_CURVE('',#146718,#146727,#146729,.T.); +#146727 = VERTEX_POINT('',#146728); +#146728 = CARTESIAN_POINT('',(110.108034,-110.701062,1.585)); +#146729 = LINE('',#146730,#146731); +#146730 = CARTESIAN_POINT('',(110.109256,-110.523763,1.585)); +#146731 = VECTOR('',#146732,1.); +#146732 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146733 = ORIENTED_EDGE('',*,*,#146734,.T.); +#146734 = EDGE_CURVE('',#146727,#146735,#146737,.T.); +#146735 = VERTEX_POINT('',#146736); +#146736 = CARTESIAN_POINT('',(109.859853,-110.945287,1.585)); +#146737 = CIRCLE('',#146738,0.348632345848); +#146738 = AXIS2_PLACEMENT_3D('',#146739,#146740,#146741); +#146739 = CARTESIAN_POINT('',(109.77208419403,-110.6078834593,1.585)); +#146740 = DIRECTION('',(0.,0.,-1.)); +#146741 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146742 = ORIENTED_EDGE('',*,*,#146743,.T.); +#146743 = EDGE_CURVE('',#146735,#146744,#146746,.T.); +#146744 = VERTEX_POINT('',#146745); +#146745 = CARTESIAN_POINT('',(109.846336,-110.946618,1.585)); +#146746 = LINE('',#146747,#146748); +#146747 = CARTESIAN_POINT('',(109.859853,-110.945287,1.585)); +#146748 = VECTOR('',#146749,1.); +#146749 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146750 = ORIENTED_EDGE('',*,*,#146751,.T.); +#146751 = EDGE_CURVE('',#146744,#146752,#146754,.T.); +#146752 = VERTEX_POINT('',#146753); +#146753 = CARTESIAN_POINT('',(110.10435,-111.317723,1.585)); +#146754 = LINE('',#146755,#146756); +#146755 = CARTESIAN_POINT('',(109.846336,-110.946618,1.585)); +#146756 = VECTOR('',#146757,1.); +#146757 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146758 = ORIENTED_EDGE('',*,*,#146759,.T.); +#146759 = EDGE_CURVE('',#146752,#146760,#146762,.T.); +#146760 = VERTEX_POINT('',#146761); +#146761 = CARTESIAN_POINT('',(109.974255,-111.390929,1.585)); +#146762 = CIRCLE('',#146763,7.500005951702E-02); +#146763 = AXIS2_PLACEMENT_3D('',#146764,#146765,#146766); +#146764 = CARTESIAN_POINT('',(110.03569706294,-111.3479187473,1.585)); +#146765 = DIRECTION('',(0.,0.,-1.)); +#146766 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146767 = ORIENTED_EDGE('',*,*,#146768,.T.); +#146768 = EDGE_CURVE('',#146760,#146769,#146771,.T.); +#146769 = VERTEX_POINT('',#146770); +#146770 = CARTESIAN_POINT('',(109.663315,-110.946728,1.585)); +#146771 = LINE('',#146772,#146773); +#146772 = CARTESIAN_POINT('',(109.974255,-111.390929,1.585)); +#146773 = VECTOR('',#146774,1.); +#146774 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146775 = ORIENTED_EDGE('',*,*,#146776,.T.); +#146776 = EDGE_CURVE('',#146769,#146777,#146779,.T.); +#146777 = VERTEX_POINT('',#146778); +#146778 = CARTESIAN_POINT('',(109.539269,-110.946728,1.585)); +#146779 = LINE('',#146780,#146781); +#146780 = CARTESIAN_POINT('',(109.663315,-110.946728,1.585)); +#146781 = VECTOR('',#146782,1.); +#146782 = DIRECTION('',(-1.,0.,0.)); +#146783 = ORIENTED_EDGE('',*,*,#146784,.T.); +#146784 = EDGE_CURVE('',#146777,#146785,#146787,.T.); +#146785 = VERTEX_POINT('',#146786); +#146786 = CARTESIAN_POINT('',(109.537828,-111.362551,1.585)); +#146787 = LINE('',#146788,#146789); +#146788 = CARTESIAN_POINT('',(109.539269,-110.946728,1.585)); +#146789 = VECTOR('',#146790,1.); +#146790 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146791 = ORIENTED_EDGE('',*,*,#146792,.T.); +#146792 = EDGE_CURVE('',#146785,#146793,#146795,.T.); +#146793 = VERTEX_POINT('',#146794); +#146794 = CARTESIAN_POINT('',(109.389269,-111.347919,1.585)); +#146795 = CIRCLE('',#146796,7.500006711464E-02); +#146796 = AXIS2_PLACEMENT_3D('',#146797,#146798,#146799); +#146797 = CARTESIAN_POINT('',(109.46426906711,-111.3479190671,1.585)); +#146798 = DIRECTION('',(-0.,0.,-1.)); +#146799 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146800 = ORIENTED_EDGE('',*,*,#146801,.T.); +#146801 = EDGE_CURVE('',#146793,#146699,#146802,.T.); +#146802 = LINE('',#146803,#146804); +#146803 = CARTESIAN_POINT('',(109.389269,-111.347919,1.585)); +#146804 = VECTOR('',#146805,1.); +#146805 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146806 = FACE_BOUND('',#146807,.F.); +#146807 = EDGE_LOOP('',(#146808,#146819,#146827,#146835,#146843,#146852) + ); +#146808 = ORIENTED_EDGE('',*,*,#146809,.T.); +#146809 = EDGE_CURVE('',#146810,#146812,#146814,.T.); +#146810 = VERTEX_POINT('',#146811); +#146811 = CARTESIAN_POINT('',(109.960697,-110.5561,1.585)); +#146812 = VERTEX_POINT('',#146813); +#146813 = CARTESIAN_POINT('',(109.827516,-110.422919,1.585)); +#146814 = CIRCLE('',#146815,0.18686440374); +#146815 = AXIS2_PLACEMENT_3D('',#146816,#146817,#146818); +#146816 = CARTESIAN_POINT('',(109.77998,-110.603636,1.585)); +#146817 = DIRECTION('',(0.,0.,1.)); +#146818 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146819 = ORIENTED_EDGE('',*,*,#146820,.T.); +#146820 = EDGE_CURVE('',#146812,#146821,#146823,.T.); +#146821 = VERTEX_POINT('',#146822); +#146822 = CARTESIAN_POINT('',(109.539269,-110.422919,1.585)); +#146823 = LINE('',#146824,#146825); +#146824 = CARTESIAN_POINT('',(109.827516,-110.422919,1.585)); +#146825 = VECTOR('',#146826,1.); +#146826 = DIRECTION('',(-1.,0.,0.)); +#146827 = ORIENTED_EDGE('',*,*,#146828,.T.); +#146828 = EDGE_CURVE('',#146821,#146829,#146831,.T.); +#146829 = VERTEX_POINT('',#146830); +#146830 = CARTESIAN_POINT('',(109.539269,-110.796728,1.585)); +#146831 = LINE('',#146832,#146833); +#146832 = CARTESIAN_POINT('',(109.539269,-110.422919,1.585)); +#146833 = VECTOR('',#146834,1.); +#146834 = DIRECTION('',(0.,-1.,0.)); +#146835 = ORIENTED_EDGE('',*,*,#146836,.T.); +#146836 = EDGE_CURVE('',#146829,#146837,#146839,.T.); +#146837 = VERTEX_POINT('',#146838); +#146838 = CARTESIAN_POINT('',(109.827516,-110.796728,1.585)); +#146839 = LINE('',#146840,#146841); +#146840 = CARTESIAN_POINT('',(109.539269,-110.796728,1.585)); +#146841 = VECTOR('',#146842,1.); +#146842 = DIRECTION('',(1.,0.,0.)); +#146843 = ORIENTED_EDGE('',*,*,#146844,.T.); +#146844 = EDGE_CURVE('',#146837,#146845,#146847,.T.); +#146845 = VERTEX_POINT('',#146846); +#146846 = CARTESIAN_POINT('',(109.960697,-110.663547,1.585)); +#146847 = CIRCLE('',#146848,0.18686440374); +#146848 = AXIS2_PLACEMENT_3D('',#146849,#146850,#146851); +#146849 = CARTESIAN_POINT('',(109.77998,-110.616011,1.585)); +#146850 = DIRECTION('',(0.,0.,1.)); +#146851 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#146852 = ORIENTED_EDGE('',*,*,#146853,.T.); +#146853 = EDGE_CURVE('',#146845,#146810,#146854,.T.); +#146854 = LINE('',#146855,#146856); +#146855 = CARTESIAN_POINT('',(109.960697,-110.663547,1.585)); +#146856 = VECTOR('',#146857,1.); +#146857 = DIRECTION('',(0.,1.,0.)); +#146858 = PLANE('',#146859); +#146859 = AXIS2_PLACEMENT_3D('',#146860,#146861,#146862); +#146860 = CARTESIAN_POINT('',(0.,0.,1.585)); +#146861 = DIRECTION('',(0.,0.,1.)); +#146862 = DIRECTION('',(1.,0.,-0.)); +#146863 = SHELL_BASED_SURFACE_MODEL('',(#146864)); +#146864 = OPEN_SHELL('',(#146865)); +#146865 = ADVANCED_FACE('',(#146866,#146977),#147029,.T.); +#146866 = FACE_BOUND('',#146867,.F.); +#146867 = EDGE_LOOP('',(#146868,#146879,#146887,#146896,#146904,#146913, + #146921,#146929,#146938,#146946,#146954,#146962,#146971)); +#146868 = ORIENTED_EDGE('',*,*,#146869,.T.); +#146869 = EDGE_CURVE('',#146870,#146872,#146874,.T.); +#146870 = VERTEX_POINT('',#146871); +#146871 = CARTESIAN_POINT('',(113.628805,-110.333287,1.585)); +#146872 = VERTEX_POINT('',#146873); +#146873 = CARTESIAN_POINT('',(113.702364,-110.272919,1.585)); +#146874 = CIRCLE('',#146875,7.500074938989E-02); +#146875 = AXIS2_PLACEMENT_3D('',#146876,#146877,#146878); +#146876 = CARTESIAN_POINT('',(113.70236446611,-110.3479197493,1.585)); +#146877 = DIRECTION('',(0.,0.,-1.)); +#146878 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#146879 = ORIENTED_EDGE('',*,*,#146880,.T.); +#146880 = EDGE_CURVE('',#146872,#146881,#146883,.T.); +#146881 = VERTEX_POINT('',#146882); +#146882 = CARTESIAN_POINT('',(114.097948,-110.27436,1.585)); +#146883 = LINE('',#146884,#146885); +#146884 = CARTESIAN_POINT('',(113.702364,-110.272919,1.585)); +#146885 = VECTOR('',#146886,1.); +#146886 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#146887 = ORIENTED_EDGE('',*,*,#146888,.T.); +#146888 = EDGE_CURVE('',#146881,#146889,#146891,.T.); +#146889 = VERTEX_POINT('',#146890); +#146890 = CARTESIAN_POINT('',(114.347351,-110.523763,1.585)); +#146891 = CIRCLE('',#146892,0.347870264855); +#146892 = AXIS2_PLACEMENT_3D('',#146893,#146894,#146895); +#146893 = CARTESIAN_POINT('',(114.01062026502,-110.6110907349,1.585)); +#146894 = DIRECTION('',(0.,0.,-1.)); +#146895 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#146896 = ORIENTED_EDGE('',*,*,#146897,.T.); +#146897 = EDGE_CURVE('',#146889,#146898,#146900,.T.); +#146898 = VERTEX_POINT('',#146899); +#146899 = CARTESIAN_POINT('',(114.346129,-110.701062,1.585)); +#146900 = LINE('',#146901,#146902); +#146901 = CARTESIAN_POINT('',(114.347351,-110.523763,1.585)); +#146902 = VECTOR('',#146903,1.); +#146903 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#146904 = ORIENTED_EDGE('',*,*,#146905,.T.); +#146905 = EDGE_CURVE('',#146898,#146906,#146908,.T.); +#146906 = VERTEX_POINT('',#146907); +#146907 = CARTESIAN_POINT('',(114.097948,-110.945287,1.585)); +#146908 = CIRCLE('',#146909,0.348632345849); +#146909 = AXIS2_PLACEMENT_3D('',#146910,#146911,#146912); +#146910 = CARTESIAN_POINT('',(114.01017919403,-110.6078834593,1.585)); +#146911 = DIRECTION('',(0.,0.,-1.)); +#146912 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#146913 = ORIENTED_EDGE('',*,*,#146914,.T.); +#146914 = EDGE_CURVE('',#146906,#146915,#146917,.T.); +#146915 = VERTEX_POINT('',#146916); +#146916 = CARTESIAN_POINT('',(114.084431,-110.946618,1.585)); +#146917 = LINE('',#146918,#146919); +#146918 = CARTESIAN_POINT('',(114.097948,-110.945287,1.585)); +#146919 = VECTOR('',#146920,1.); +#146920 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#146921 = ORIENTED_EDGE('',*,*,#146922,.T.); +#146922 = EDGE_CURVE('',#146915,#146923,#146925,.T.); +#146923 = VERTEX_POINT('',#146924); +#146924 = CARTESIAN_POINT('',(114.342445,-111.317723,1.585)); +#146925 = LINE('',#146926,#146927); +#146926 = CARTESIAN_POINT('',(114.084431,-110.946618,1.585)); +#146927 = VECTOR('',#146928,1.); +#146928 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#146929 = ORIENTED_EDGE('',*,*,#146930,.T.); +#146930 = EDGE_CURVE('',#146923,#146931,#146933,.T.); +#146931 = VERTEX_POINT('',#146932); +#146932 = CARTESIAN_POINT('',(114.21235,-111.390929,1.585)); +#146933 = CIRCLE('',#146934,7.500005951702E-02); +#146934 = AXIS2_PLACEMENT_3D('',#146935,#146936,#146937); +#146935 = CARTESIAN_POINT('',(114.27379206294,-111.3479187473,1.585)); +#146936 = DIRECTION('',(0.,0.,-1.)); +#146937 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#146938 = ORIENTED_EDGE('',*,*,#146939,.T.); +#146939 = EDGE_CURVE('',#146931,#146940,#146942,.T.); +#146940 = VERTEX_POINT('',#146941); +#146941 = CARTESIAN_POINT('',(113.90141,-110.946728,1.585)); +#146942 = LINE('',#146943,#146944); +#146943 = CARTESIAN_POINT('',(114.21235,-111.390929,1.585)); +#146944 = VECTOR('',#146945,1.); +#146945 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#146946 = ORIENTED_EDGE('',*,*,#146947,.T.); +#146947 = EDGE_CURVE('',#146940,#146948,#146950,.T.); +#146948 = VERTEX_POINT('',#146949); +#146949 = CARTESIAN_POINT('',(113.777364,-110.946728,1.585)); +#146950 = LINE('',#146951,#146952); +#146951 = CARTESIAN_POINT('',(113.90141,-110.946728,1.585)); +#146952 = VECTOR('',#146953,1.); +#146953 = DIRECTION('',(-1.,0.,0.)); +#146954 = ORIENTED_EDGE('',*,*,#146955,.T.); +#146955 = EDGE_CURVE('',#146948,#146956,#146958,.T.); +#146956 = VERTEX_POINT('',#146957); +#146957 = CARTESIAN_POINT('',(113.775923,-111.362551,1.585)); +#146958 = LINE('',#146959,#146960); +#146959 = CARTESIAN_POINT('',(113.777364,-110.946728,1.585)); +#146960 = VECTOR('',#146961,1.); +#146961 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#146962 = ORIENTED_EDGE('',*,*,#146963,.T.); +#146963 = EDGE_CURVE('',#146956,#146964,#146966,.T.); +#146964 = VERTEX_POINT('',#146965); +#146965 = CARTESIAN_POINT('',(113.627364,-111.347919,1.585)); +#146966 = CIRCLE('',#146967,7.500006711464E-02); +#146967 = AXIS2_PLACEMENT_3D('',#146968,#146969,#146970); +#146968 = CARTESIAN_POINT('',(113.70236406711,-111.3479190671,1.585)); +#146969 = DIRECTION('',(-0.,0.,-1.)); +#146970 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#146971 = ORIENTED_EDGE('',*,*,#146972,.T.); +#146972 = EDGE_CURVE('',#146964,#146870,#146973,.T.); +#146973 = LINE('',#146974,#146975); +#146974 = CARTESIAN_POINT('',(113.627364,-111.347919,1.585)); +#146975 = VECTOR('',#146976,1.); +#146976 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#146977 = FACE_BOUND('',#146978,.F.); +#146978 = EDGE_LOOP('',(#146979,#146990,#146998,#147006,#147014,#147023) + ); +#146979 = ORIENTED_EDGE('',*,*,#146980,.T.); +#146980 = EDGE_CURVE('',#146981,#146983,#146985,.T.); +#146981 = VERTEX_POINT('',#146982); +#146982 = CARTESIAN_POINT('',(114.198792,-110.5561,1.585)); +#146983 = VERTEX_POINT('',#146984); +#146984 = CARTESIAN_POINT('',(114.065611,-110.422919,1.585)); +#146985 = CIRCLE('',#146986,0.18686440374); +#146986 = AXIS2_PLACEMENT_3D('',#146987,#146988,#146989); +#146987 = CARTESIAN_POINT('',(114.018075,-110.603636,1.585)); +#146988 = DIRECTION('',(0.,0.,1.)); +#146989 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#146990 = ORIENTED_EDGE('',*,*,#146991,.T.); +#146991 = EDGE_CURVE('',#146983,#146992,#146994,.T.); +#146992 = VERTEX_POINT('',#146993); +#146993 = CARTESIAN_POINT('',(113.777364,-110.422919,1.585)); +#146994 = LINE('',#146995,#146996); +#146995 = CARTESIAN_POINT('',(114.065611,-110.422919,1.585)); +#146996 = VECTOR('',#146997,1.); +#146997 = DIRECTION('',(-1.,0.,0.)); +#146998 = ORIENTED_EDGE('',*,*,#146999,.T.); +#146999 = EDGE_CURVE('',#146992,#147000,#147002,.T.); +#147000 = VERTEX_POINT('',#147001); +#147001 = CARTESIAN_POINT('',(113.777364,-110.796728,1.585)); +#147002 = LINE('',#147003,#147004); +#147003 = CARTESIAN_POINT('',(113.777364,-110.422919,1.585)); +#147004 = VECTOR('',#147005,1.); +#147005 = DIRECTION('',(0.,-1.,0.)); +#147006 = ORIENTED_EDGE('',*,*,#147007,.T.); +#147007 = EDGE_CURVE('',#147000,#147008,#147010,.T.); +#147008 = VERTEX_POINT('',#147009); +#147009 = CARTESIAN_POINT('',(114.065611,-110.796728,1.585)); +#147010 = LINE('',#147011,#147012); +#147011 = CARTESIAN_POINT('',(113.777364,-110.796728,1.585)); +#147012 = VECTOR('',#147013,1.); +#147013 = DIRECTION('',(1.,0.,0.)); +#147014 = ORIENTED_EDGE('',*,*,#147015,.T.); +#147015 = EDGE_CURVE('',#147008,#147016,#147018,.T.); +#147016 = VERTEX_POINT('',#147017); +#147017 = CARTESIAN_POINT('',(114.198792,-110.663547,1.585)); +#147018 = CIRCLE('',#147019,0.18686440374); +#147019 = AXIS2_PLACEMENT_3D('',#147020,#147021,#147022); +#147020 = CARTESIAN_POINT('',(114.018075,-110.616011,1.585)); +#147021 = DIRECTION('',(0.,0.,1.)); +#147022 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#147023 = ORIENTED_EDGE('',*,*,#147024,.T.); +#147024 = EDGE_CURVE('',#147016,#146981,#147025,.T.); +#147025 = LINE('',#147026,#147027); +#147026 = CARTESIAN_POINT('',(114.198792,-110.663547,1.585)); +#147027 = VECTOR('',#147028,1.); +#147028 = DIRECTION('',(0.,1.,0.)); +#147029 = PLANE('',#147030); +#147030 = AXIS2_PLACEMENT_3D('',#147031,#147032,#147033); +#147031 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147032 = DIRECTION('',(0.,0.,1.)); +#147033 = DIRECTION('',(1.,0.,-0.)); +#147034 = SHELL_BASED_SURFACE_MODEL('',(#147035)); +#147035 = OPEN_SHELL('',(#147036)); +#147036 = ADVANCED_FACE('',(#147037,#147148),#147200,.T.); +#147037 = FACE_BOUND('',#147038,.F.); +#147038 = EDGE_LOOP('',(#147039,#147050,#147058,#147067,#147075,#147084, + #147092,#147100,#147109,#147117,#147125,#147133,#147142)); +#147039 = ORIENTED_EDGE('',*,*,#147040,.T.); +#147040 = EDGE_CURVE('',#147041,#147043,#147045,.T.); +#147041 = VERTEX_POINT('',#147042); +#147042 = CARTESIAN_POINT('',(123.628805,-110.333287,1.585)); +#147043 = VERTEX_POINT('',#147044); +#147044 = CARTESIAN_POINT('',(123.702364,-110.272919,1.585)); +#147045 = CIRCLE('',#147046,7.500074938989E-02); +#147046 = AXIS2_PLACEMENT_3D('',#147047,#147048,#147049); +#147047 = CARTESIAN_POINT('',(123.70236446611,-110.3479197493,1.585)); +#147048 = DIRECTION('',(0.,0.,-1.)); +#147049 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#147050 = ORIENTED_EDGE('',*,*,#147051,.T.); +#147051 = EDGE_CURVE('',#147043,#147052,#147054,.T.); +#147052 = VERTEX_POINT('',#147053); +#147053 = CARTESIAN_POINT('',(124.097948,-110.27436,1.585)); +#147054 = LINE('',#147055,#147056); +#147055 = CARTESIAN_POINT('',(123.702364,-110.272919,1.585)); +#147056 = VECTOR('',#147057,1.); +#147057 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#147058 = ORIENTED_EDGE('',*,*,#147059,.T.); +#147059 = EDGE_CURVE('',#147052,#147060,#147062,.T.); +#147060 = VERTEX_POINT('',#147061); +#147061 = CARTESIAN_POINT('',(124.347351,-110.523763,1.585)); +#147062 = CIRCLE('',#147063,0.347870264855); +#147063 = AXIS2_PLACEMENT_3D('',#147064,#147065,#147066); +#147064 = CARTESIAN_POINT('',(124.01062026502,-110.6110907349,1.585)); +#147065 = DIRECTION('',(0.,0.,-1.)); +#147066 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#147067 = ORIENTED_EDGE('',*,*,#147068,.T.); +#147068 = EDGE_CURVE('',#147060,#147069,#147071,.T.); +#147069 = VERTEX_POINT('',#147070); +#147070 = CARTESIAN_POINT('',(124.346129,-110.701062,1.585)); +#147071 = LINE('',#147072,#147073); +#147072 = CARTESIAN_POINT('',(124.347351,-110.523763,1.585)); +#147073 = VECTOR('',#147074,1.); +#147074 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#147075 = ORIENTED_EDGE('',*,*,#147076,.T.); +#147076 = EDGE_CURVE('',#147069,#147077,#147079,.T.); +#147077 = VERTEX_POINT('',#147078); +#147078 = CARTESIAN_POINT('',(124.097948,-110.945287,1.585)); +#147079 = CIRCLE('',#147080,0.348632345849); +#147080 = AXIS2_PLACEMENT_3D('',#147081,#147082,#147083); +#147081 = CARTESIAN_POINT('',(124.01017919403,-110.6078834593,1.585)); +#147082 = DIRECTION('',(0.,0.,-1.)); +#147083 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#147084 = ORIENTED_EDGE('',*,*,#147085,.T.); +#147085 = EDGE_CURVE('',#147077,#147086,#147088,.T.); +#147086 = VERTEX_POINT('',#147087); +#147087 = CARTESIAN_POINT('',(124.084431,-110.946618,1.585)); +#147088 = LINE('',#147089,#147090); +#147089 = CARTESIAN_POINT('',(124.097948,-110.945287,1.585)); +#147090 = VECTOR('',#147091,1.); +#147091 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#147092 = ORIENTED_EDGE('',*,*,#147093,.T.); +#147093 = EDGE_CURVE('',#147086,#147094,#147096,.T.); +#147094 = VERTEX_POINT('',#147095); +#147095 = CARTESIAN_POINT('',(124.342445,-111.317723,1.585)); +#147096 = LINE('',#147097,#147098); +#147097 = CARTESIAN_POINT('',(124.084431,-110.946618,1.585)); +#147098 = VECTOR('',#147099,1.); +#147099 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#147100 = ORIENTED_EDGE('',*,*,#147101,.T.); +#147101 = EDGE_CURVE('',#147094,#147102,#147104,.T.); +#147102 = VERTEX_POINT('',#147103); +#147103 = CARTESIAN_POINT('',(124.21235,-111.390929,1.585)); +#147104 = CIRCLE('',#147105,7.500005951702E-02); +#147105 = AXIS2_PLACEMENT_3D('',#147106,#147107,#147108); +#147106 = CARTESIAN_POINT('',(124.27379206294,-111.3479187473,1.585)); +#147107 = DIRECTION('',(0.,0.,-1.)); +#147108 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#147109 = ORIENTED_EDGE('',*,*,#147110,.T.); +#147110 = EDGE_CURVE('',#147102,#147111,#147113,.T.); +#147111 = VERTEX_POINT('',#147112); +#147112 = CARTESIAN_POINT('',(123.90141,-110.946728,1.585)); +#147113 = LINE('',#147114,#147115); +#147114 = CARTESIAN_POINT('',(124.21235,-111.390929,1.585)); +#147115 = VECTOR('',#147116,1.); +#147116 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#147117 = ORIENTED_EDGE('',*,*,#147118,.T.); +#147118 = EDGE_CURVE('',#147111,#147119,#147121,.T.); +#147119 = VERTEX_POINT('',#147120); +#147120 = CARTESIAN_POINT('',(123.777364,-110.946728,1.585)); +#147121 = LINE('',#147122,#147123); +#147122 = CARTESIAN_POINT('',(123.90141,-110.946728,1.585)); +#147123 = VECTOR('',#147124,1.); +#147124 = DIRECTION('',(-1.,0.,0.)); +#147125 = ORIENTED_EDGE('',*,*,#147126,.T.); +#147126 = EDGE_CURVE('',#147119,#147127,#147129,.T.); +#147127 = VERTEX_POINT('',#147128); +#147128 = CARTESIAN_POINT('',(123.775923,-111.362551,1.585)); +#147129 = LINE('',#147130,#147131); +#147130 = CARTESIAN_POINT('',(123.777364,-110.946728,1.585)); +#147131 = VECTOR('',#147132,1.); +#147132 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#147133 = ORIENTED_EDGE('',*,*,#147134,.T.); +#147134 = EDGE_CURVE('',#147127,#147135,#147137,.T.); +#147135 = VERTEX_POINT('',#147136); +#147136 = CARTESIAN_POINT('',(123.627364,-111.347919,1.585)); +#147137 = CIRCLE('',#147138,7.500006711464E-02); +#147138 = AXIS2_PLACEMENT_3D('',#147139,#147140,#147141); +#147139 = CARTESIAN_POINT('',(123.70236406711,-111.3479190671,1.585)); +#147140 = DIRECTION('',(-0.,0.,-1.)); +#147141 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#147142 = ORIENTED_EDGE('',*,*,#147143,.T.); +#147143 = EDGE_CURVE('',#147135,#147041,#147144,.T.); +#147144 = LINE('',#147145,#147146); +#147145 = CARTESIAN_POINT('',(123.627364,-111.347919,1.585)); +#147146 = VECTOR('',#147147,1.); +#147147 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#147148 = FACE_BOUND('',#147149,.F.); +#147149 = EDGE_LOOP('',(#147150,#147161,#147169,#147177,#147185,#147194) + ); +#147150 = ORIENTED_EDGE('',*,*,#147151,.T.); +#147151 = EDGE_CURVE('',#147152,#147154,#147156,.T.); +#147152 = VERTEX_POINT('',#147153); +#147153 = CARTESIAN_POINT('',(124.198792,-110.5561,1.585)); +#147154 = VERTEX_POINT('',#147155); +#147155 = CARTESIAN_POINT('',(124.065611,-110.422919,1.585)); +#147156 = CIRCLE('',#147157,0.18686440374); +#147157 = AXIS2_PLACEMENT_3D('',#147158,#147159,#147160); +#147158 = CARTESIAN_POINT('',(124.018075,-110.603636,1.585)); +#147159 = DIRECTION('',(0.,0.,1.)); +#147160 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#147161 = ORIENTED_EDGE('',*,*,#147162,.T.); +#147162 = EDGE_CURVE('',#147154,#147163,#147165,.T.); +#147163 = VERTEX_POINT('',#147164); +#147164 = CARTESIAN_POINT('',(123.777364,-110.422919,1.585)); +#147165 = LINE('',#147166,#147167); +#147166 = CARTESIAN_POINT('',(124.065611,-110.422919,1.585)); +#147167 = VECTOR('',#147168,1.); +#147168 = DIRECTION('',(-1.,0.,0.)); +#147169 = ORIENTED_EDGE('',*,*,#147170,.T.); +#147170 = EDGE_CURVE('',#147163,#147171,#147173,.T.); +#147171 = VERTEX_POINT('',#147172); +#147172 = CARTESIAN_POINT('',(123.777364,-110.796728,1.585)); +#147173 = LINE('',#147174,#147175); +#147174 = CARTESIAN_POINT('',(123.777364,-110.422919,1.585)); +#147175 = VECTOR('',#147176,1.); +#147176 = DIRECTION('',(0.,-1.,0.)); +#147177 = ORIENTED_EDGE('',*,*,#147178,.T.); +#147178 = EDGE_CURVE('',#147171,#147179,#147181,.T.); +#147179 = VERTEX_POINT('',#147180); +#147180 = CARTESIAN_POINT('',(124.065611,-110.796728,1.585)); +#147181 = LINE('',#147182,#147183); +#147182 = CARTESIAN_POINT('',(123.777364,-110.796728,1.585)); +#147183 = VECTOR('',#147184,1.); +#147184 = DIRECTION('',(1.,0.,0.)); +#147185 = ORIENTED_EDGE('',*,*,#147186,.T.); +#147186 = EDGE_CURVE('',#147179,#147187,#147189,.T.); +#147187 = VERTEX_POINT('',#147188); +#147188 = CARTESIAN_POINT('',(124.198792,-110.663547,1.585)); +#147189 = CIRCLE('',#147190,0.18686440374); +#147190 = AXIS2_PLACEMENT_3D('',#147191,#147192,#147193); +#147191 = CARTESIAN_POINT('',(124.018075,-110.616011,1.585)); +#147192 = DIRECTION('',(0.,0.,1.)); +#147193 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#147194 = ORIENTED_EDGE('',*,*,#147195,.T.); +#147195 = EDGE_CURVE('',#147187,#147152,#147196,.T.); +#147196 = LINE('',#147197,#147198); +#147197 = CARTESIAN_POINT('',(124.198792,-110.663547,1.585)); +#147198 = VECTOR('',#147199,1.); +#147199 = DIRECTION('',(0.,1.,0.)); +#147200 = PLANE('',#147201); +#147201 = AXIS2_PLACEMENT_3D('',#147202,#147203,#147204); +#147202 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147203 = DIRECTION('',(0.,0.,1.)); +#147204 = DIRECTION('',(1.,0.,-0.)); +#147205 = SHELL_BASED_SURFACE_MODEL('',(#147206)); +#147206 = OPEN_SHELL('',(#147207)); +#147207 = ADVANCED_FACE('',(#147208,#147319),#147371,.T.); +#147208 = FACE_BOUND('',#147209,.F.); +#147209 = EDGE_LOOP('',(#147210,#147221,#147229,#147238,#147246,#147255, + #147263,#147271,#147280,#147288,#147296,#147304,#147313)); +#147210 = ORIENTED_EDGE('',*,*,#147211,.T.); +#147211 = EDGE_CURVE('',#147212,#147214,#147216,.T.); +#147212 = VERTEX_POINT('',#147213); +#147213 = CARTESIAN_POINT('',(127.628805,-110.333287,1.585)); +#147214 = VERTEX_POINT('',#147215); +#147215 = CARTESIAN_POINT('',(127.702364,-110.272919,1.585)); +#147216 = CIRCLE('',#147217,7.500074938989E-02); +#147217 = AXIS2_PLACEMENT_3D('',#147218,#147219,#147220); +#147218 = CARTESIAN_POINT('',(127.70236446611,-110.3479197493,1.585)); +#147219 = DIRECTION('',(0.,0.,-1.)); +#147220 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#147221 = ORIENTED_EDGE('',*,*,#147222,.T.); +#147222 = EDGE_CURVE('',#147214,#147223,#147225,.T.); +#147223 = VERTEX_POINT('',#147224); +#147224 = CARTESIAN_POINT('',(128.097948,-110.27436,1.585)); +#147225 = LINE('',#147226,#147227); +#147226 = CARTESIAN_POINT('',(127.702364,-110.272919,1.585)); +#147227 = VECTOR('',#147228,1.); +#147228 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#147229 = ORIENTED_EDGE('',*,*,#147230,.T.); +#147230 = EDGE_CURVE('',#147223,#147231,#147233,.T.); +#147231 = VERTEX_POINT('',#147232); +#147232 = CARTESIAN_POINT('',(128.347351,-110.523763,1.585)); +#147233 = CIRCLE('',#147234,0.347870264855); +#147234 = AXIS2_PLACEMENT_3D('',#147235,#147236,#147237); +#147235 = CARTESIAN_POINT('',(128.01062026502,-110.6110907349,1.585)); +#147236 = DIRECTION('',(0.,0.,-1.)); +#147237 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#147238 = ORIENTED_EDGE('',*,*,#147239,.T.); +#147239 = EDGE_CURVE('',#147231,#147240,#147242,.T.); +#147240 = VERTEX_POINT('',#147241); +#147241 = CARTESIAN_POINT('',(128.346129,-110.701062,1.585)); +#147242 = LINE('',#147243,#147244); +#147243 = CARTESIAN_POINT('',(128.347351,-110.523763,1.585)); +#147244 = VECTOR('',#147245,1.); +#147245 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#147246 = ORIENTED_EDGE('',*,*,#147247,.T.); +#147247 = EDGE_CURVE('',#147240,#147248,#147250,.T.); +#147248 = VERTEX_POINT('',#147249); +#147249 = CARTESIAN_POINT('',(128.097948,-110.945287,1.585)); +#147250 = CIRCLE('',#147251,0.348632345848); +#147251 = AXIS2_PLACEMENT_3D('',#147252,#147253,#147254); +#147252 = CARTESIAN_POINT('',(128.01017919403,-110.6078834593,1.585)); +#147253 = DIRECTION('',(0.,0.,-1.)); +#147254 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#147255 = ORIENTED_EDGE('',*,*,#147256,.T.); +#147256 = EDGE_CURVE('',#147248,#147257,#147259,.T.); +#147257 = VERTEX_POINT('',#147258); +#147258 = CARTESIAN_POINT('',(128.084431,-110.946618,1.585)); +#147259 = LINE('',#147260,#147261); +#147260 = CARTESIAN_POINT('',(128.097948,-110.945287,1.585)); +#147261 = VECTOR('',#147262,1.); +#147262 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#147263 = ORIENTED_EDGE('',*,*,#147264,.T.); +#147264 = EDGE_CURVE('',#147257,#147265,#147267,.T.); +#147265 = VERTEX_POINT('',#147266); +#147266 = CARTESIAN_POINT('',(128.342445,-111.317723,1.585)); +#147267 = LINE('',#147268,#147269); +#147268 = CARTESIAN_POINT('',(128.084431,-110.946618,1.585)); +#147269 = VECTOR('',#147270,1.); +#147270 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#147271 = ORIENTED_EDGE('',*,*,#147272,.T.); +#147272 = EDGE_CURVE('',#147265,#147273,#147275,.T.); +#147273 = VERTEX_POINT('',#147274); +#147274 = CARTESIAN_POINT('',(128.21235,-111.390929,1.585)); +#147275 = CIRCLE('',#147276,7.500005951703E-02); +#147276 = AXIS2_PLACEMENT_3D('',#147277,#147278,#147279); +#147277 = CARTESIAN_POINT('',(128.27379206294,-111.3479187473,1.585)); +#147278 = DIRECTION('',(0.,0.,-1.)); +#147279 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#147280 = ORIENTED_EDGE('',*,*,#147281,.T.); +#147281 = EDGE_CURVE('',#147273,#147282,#147284,.T.); +#147282 = VERTEX_POINT('',#147283); +#147283 = CARTESIAN_POINT('',(127.90141,-110.946728,1.585)); +#147284 = LINE('',#147285,#147286); +#147285 = CARTESIAN_POINT('',(128.21235,-111.390929,1.585)); +#147286 = VECTOR('',#147287,1.); +#147287 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#147288 = ORIENTED_EDGE('',*,*,#147289,.T.); +#147289 = EDGE_CURVE('',#147282,#147290,#147292,.T.); +#147290 = VERTEX_POINT('',#147291); +#147291 = CARTESIAN_POINT('',(127.777364,-110.946728,1.585)); +#147292 = LINE('',#147293,#147294); +#147293 = CARTESIAN_POINT('',(127.90141,-110.946728,1.585)); +#147294 = VECTOR('',#147295,1.); +#147295 = DIRECTION('',(-1.,0.,0.)); +#147296 = ORIENTED_EDGE('',*,*,#147297,.T.); +#147297 = EDGE_CURVE('',#147290,#147298,#147300,.T.); +#147298 = VERTEX_POINT('',#147299); +#147299 = CARTESIAN_POINT('',(127.775923,-111.362551,1.585)); +#147300 = LINE('',#147301,#147302); +#147301 = CARTESIAN_POINT('',(127.777364,-110.946728,1.585)); +#147302 = VECTOR('',#147303,1.); +#147303 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#147304 = ORIENTED_EDGE('',*,*,#147305,.T.); +#147305 = EDGE_CURVE('',#147298,#147306,#147308,.T.); +#147306 = VERTEX_POINT('',#147307); +#147307 = CARTESIAN_POINT('',(127.627364,-111.347919,1.585)); +#147308 = CIRCLE('',#147309,7.500006711464E-02); +#147309 = AXIS2_PLACEMENT_3D('',#147310,#147311,#147312); +#147310 = CARTESIAN_POINT('',(127.70236406711,-111.3479190671,1.585)); +#147311 = DIRECTION('',(-0.,0.,-1.)); +#147312 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#147313 = ORIENTED_EDGE('',*,*,#147314,.T.); +#147314 = EDGE_CURVE('',#147306,#147212,#147315,.T.); +#147315 = LINE('',#147316,#147317); +#147316 = CARTESIAN_POINT('',(127.627364,-111.347919,1.585)); +#147317 = VECTOR('',#147318,1.); +#147318 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#147319 = FACE_BOUND('',#147320,.F.); +#147320 = EDGE_LOOP('',(#147321,#147332,#147340,#147348,#147356,#147365) + ); +#147321 = ORIENTED_EDGE('',*,*,#147322,.T.); +#147322 = EDGE_CURVE('',#147323,#147325,#147327,.T.); +#147323 = VERTEX_POINT('',#147324); +#147324 = CARTESIAN_POINT('',(128.198792,-110.5561,1.585)); +#147325 = VERTEX_POINT('',#147326); +#147326 = CARTESIAN_POINT('',(128.065611,-110.422919,1.585)); +#147327 = CIRCLE('',#147328,0.18686440374); +#147328 = AXIS2_PLACEMENT_3D('',#147329,#147330,#147331); +#147329 = CARTESIAN_POINT('',(128.018075,-110.603636,1.585)); +#147330 = DIRECTION('',(0.,0.,1.)); +#147331 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#147332 = ORIENTED_EDGE('',*,*,#147333,.T.); +#147333 = EDGE_CURVE('',#147325,#147334,#147336,.T.); +#147334 = VERTEX_POINT('',#147335); +#147335 = CARTESIAN_POINT('',(127.777364,-110.422919,1.585)); +#147336 = LINE('',#147337,#147338); +#147337 = CARTESIAN_POINT('',(128.065611,-110.422919,1.585)); +#147338 = VECTOR('',#147339,1.); +#147339 = DIRECTION('',(-1.,0.,0.)); +#147340 = ORIENTED_EDGE('',*,*,#147341,.T.); +#147341 = EDGE_CURVE('',#147334,#147342,#147344,.T.); +#147342 = VERTEX_POINT('',#147343); +#147343 = CARTESIAN_POINT('',(127.777364,-110.796728,1.585)); +#147344 = LINE('',#147345,#147346); +#147345 = CARTESIAN_POINT('',(127.777364,-110.422919,1.585)); +#147346 = VECTOR('',#147347,1.); +#147347 = DIRECTION('',(0.,-1.,0.)); +#147348 = ORIENTED_EDGE('',*,*,#147349,.T.); +#147349 = EDGE_CURVE('',#147342,#147350,#147352,.T.); +#147350 = VERTEX_POINT('',#147351); +#147351 = CARTESIAN_POINT('',(128.065611,-110.796728,1.585)); +#147352 = LINE('',#147353,#147354); +#147353 = CARTESIAN_POINT('',(127.777364,-110.796728,1.585)); +#147354 = VECTOR('',#147355,1.); +#147355 = DIRECTION('',(1.,0.,0.)); +#147356 = ORIENTED_EDGE('',*,*,#147357,.T.); +#147357 = EDGE_CURVE('',#147350,#147358,#147360,.T.); +#147358 = VERTEX_POINT('',#147359); +#147359 = CARTESIAN_POINT('',(128.198792,-110.663547,1.585)); +#147360 = CIRCLE('',#147361,0.18686440374); +#147361 = AXIS2_PLACEMENT_3D('',#147362,#147363,#147364); +#147362 = CARTESIAN_POINT('',(128.018075,-110.616011,1.585)); +#147363 = DIRECTION('',(0.,0.,1.)); +#147364 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#147365 = ORIENTED_EDGE('',*,*,#147366,.T.); +#147366 = EDGE_CURVE('',#147358,#147323,#147367,.T.); +#147367 = LINE('',#147368,#147369); +#147368 = CARTESIAN_POINT('',(128.198792,-110.663547,1.585)); +#147369 = VECTOR('',#147370,1.); +#147370 = DIRECTION('',(0.,1.,0.)); +#147371 = PLANE('',#147372); +#147372 = AXIS2_PLACEMENT_3D('',#147373,#147374,#147375); +#147373 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147374 = DIRECTION('',(0.,0.,1.)); +#147375 = DIRECTION('',(1.,0.,-0.)); +#147376 = SHELL_BASED_SURFACE_MODEL('',(#147377)); +#147377 = OPEN_SHELL('',(#147378)); +#147378 = ADVANCED_FACE('',(#147379),#147471,.T.); +#147379 = FACE_BOUND('',#147380,.F.); +#147380 = EDGE_LOOP('',(#147381,#147392,#147400,#147408,#147416,#147425, + #147433,#147441,#147449,#147457,#147465)); +#147381 = ORIENTED_EDGE('',*,*,#147382,.T.); +#147382 = EDGE_CURVE('',#147383,#147385,#147387,.T.); +#147383 = VERTEX_POINT('',#147384); +#147384 = CARTESIAN_POINT('',(94.97022,-110.285559,1.585)); +#147385 = VERTEX_POINT('',#147386); +#147386 = CARTESIAN_POINT('',(95.086888,-110.347919,1.585)); +#147387 = CIRCLE('',#147388,7.500000000004E-02); +#147388 = AXIS2_PLACEMENT_3D('',#147389,#147390,#147391); +#147389 = CARTESIAN_POINT('',(95.011888,-110.3479190655,1.585)); +#147390 = DIRECTION('',(0.,0.,-1.)); +#147391 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#147392 = ORIENTED_EDGE('',*,*,#147393,.T.); +#147393 = EDGE_CURVE('',#147385,#147394,#147396,.T.); +#147394 = VERTEX_POINT('',#147395); +#147395 = CARTESIAN_POINT('',(95.086888,-111.187356,1.585)); +#147396 = LINE('',#147397,#147398); +#147397 = CARTESIAN_POINT('',(95.086888,-110.347919,1.585)); +#147398 = VECTOR('',#147399,1.); +#147399 = DIRECTION('',(0.,-1.,0.)); +#147400 = ORIENTED_EDGE('',*,*,#147401,.T.); +#147401 = EDGE_CURVE('',#147394,#147402,#147404,.T.); +#147402 = VERTEX_POINT('',#147403); +#147403 = CARTESIAN_POINT('',(95.115408,-111.244398,1.585)); +#147404 = LINE('',#147405,#147406); +#147405 = CARTESIAN_POINT('',(95.086888,-111.187356,1.585)); +#147406 = VECTOR('',#147407,1.); +#147407 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#147408 = ORIENTED_EDGE('',*,*,#147409,.T.); +#147409 = EDGE_CURVE('',#147402,#147410,#147412,.T.); +#147410 = VERTEX_POINT('',#147411); +#147411 = CARTESIAN_POINT('',(95.200729,-111.288669,1.585)); +#147412 = LINE('',#147413,#147414); +#147413 = CARTESIAN_POINT('',(95.115408,-111.244398,1.585)); +#147414 = VECTOR('',#147415,1.); +#147415 = DIRECTION('',(0.887624909794,-0.460567062992,0.)); +#147416 = ORIENTED_EDGE('',*,*,#147417,.T.); +#147417 = EDGE_CURVE('',#147410,#147418,#147420,.T.); +#147418 = VERTEX_POINT('',#147419); +#147419 = CARTESIAN_POINT('',(95.121204,-111.415001,1.585)); +#147420 = CIRCLE('',#147421,7.500029440362E-02); +#147421 = AXIS2_PLACEMENT_3D('',#147422,#147423,#147424); +#147422 = CARTESIAN_POINT('',(95.154745053971,-111.3479186486,1.585)); +#147423 = DIRECTION('',(0.,0.,-1.)); +#147424 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#147425 = ORIENTED_EDGE('',*,*,#147426,.T.); +#147426 = EDGE_CURVE('',#147418,#147427,#147429,.T.); +#147427 = VERTEX_POINT('',#147428); +#147428 = CARTESIAN_POINT('',(95.013523,-111.35955,1.585)); +#147429 = LINE('',#147430,#147431); +#147430 = CARTESIAN_POINT('',(95.121204,-111.415001,1.585)); +#147431 = VECTOR('',#147432,1.); +#147432 = DIRECTION('',(-0.889045233553,0.457819366887,0.)); +#147433 = ORIENTED_EDGE('',*,*,#147434,.T.); +#147434 = EDGE_CURVE('',#147427,#147435,#147437,.T.); +#147435 = VERTEX_POINT('',#147436); +#147436 = CARTESIAN_POINT('',(94.992425,-111.333841,1.585)); +#147437 = LINE('',#147438,#147439); +#147438 = CARTESIAN_POINT('',(95.013523,-111.35955,1.585)); +#147439 = VECTOR('',#147440,1.); +#147440 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#147441 = ORIENTED_EDGE('',*,*,#147442,.T.); +#147442 = EDGE_CURVE('',#147435,#147443,#147445,.T.); +#147443 = VERTEX_POINT('',#147444); +#147444 = CARTESIAN_POINT('',(94.938329,-111.219693,1.585)); +#147445 = LINE('',#147446,#147447); +#147446 = CARTESIAN_POINT('',(94.992425,-111.333841,1.585)); +#147447 = VECTOR('',#147448,1.); +#147448 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#147449 = ORIENTED_EDGE('',*,*,#147450,.T.); +#147450 = EDGE_CURVE('',#147443,#147451,#147453,.T.); +#147451 = VERTEX_POINT('',#147452); +#147452 = CARTESIAN_POINT('',(94.938329,-110.333287,1.585)); +#147453 = LINE('',#147454,#147455); +#147454 = CARTESIAN_POINT('',(94.938329,-111.219693,1.585)); +#147455 = VECTOR('',#147456,1.); +#147456 = DIRECTION('',(0.,1.,0.)); +#147457 = ORIENTED_EDGE('',*,*,#147458,.T.); +#147458 = EDGE_CURVE('',#147451,#147459,#147461,.T.); +#147459 = VERTEX_POINT('',#147460); +#147460 = CARTESIAN_POINT('',(94.949528,-110.306251,1.585)); +#147461 = LINE('',#147462,#147463); +#147462 = CARTESIAN_POINT('',(94.938329,-110.333287,1.585)); +#147463 = VECTOR('',#147464,1.); +#147464 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#147465 = ORIENTED_EDGE('',*,*,#147466,.T.); +#147466 = EDGE_CURVE('',#147459,#147383,#147467,.T.); +#147467 = LINE('',#147468,#147469); +#147468 = CARTESIAN_POINT('',(94.949528,-110.306251,1.585)); +#147469 = VECTOR('',#147470,1.); +#147470 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#147471 = PLANE('',#147472); +#147472 = AXIS2_PLACEMENT_3D('',#147473,#147474,#147475); +#147473 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147474 = DIRECTION('',(0.,0.,1.)); +#147475 = DIRECTION('',(1.,0.,-0.)); +#147476 = SHELL_BASED_SURFACE_MODEL('',(#147477)); +#147477 = OPEN_SHELL('',(#147478)); +#147478 = ADVANCED_FACE('',(#147479),#147664,.T.); +#147479 = FACE_BOUND('',#147480,.F.); +#147480 = EDGE_LOOP('',(#147481,#147492,#147500,#147509,#147517,#147526, + #147534,#147543,#147551,#147559,#147567,#147576,#147584,#147593, + #147601,#147610,#147618,#147626,#147634,#147642,#147650,#147658)); +#147481 = ORIENTED_EDGE('',*,*,#147482,.T.); +#147482 = EDGE_CURVE('',#147483,#147485,#147487,.T.); +#147483 = VERTEX_POINT('',#147484); +#147484 = CARTESIAN_POINT('',(117.808078,-110.330381,1.585)); +#147485 = VERTEX_POINT('',#147486); +#147486 = CARTESIAN_POINT('',(118.267841,-110.333178,1.585)); +#147487 = CIRCLE('',#147488,0.460785175821); +#147488 = AXIS2_PLACEMENT_3D('',#147489,#147490,#147491); +#147489 = CARTESIAN_POINT('',(118.03553010897,-110.7311159702,1.585)); +#147490 = DIRECTION('',(0.,0.,-1.)); +#147491 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#147492 = ORIENTED_EDGE('',*,*,#147493,.T.); +#147493 = EDGE_CURVE('',#147485,#147494,#147496,.T.); +#147494 = VERTEX_POINT('',#147495); +#147495 = CARTESIAN_POINT('',(118.336152,-110.401489,1.585)); +#147496 = LINE('',#147497,#147498); +#147497 = CARTESIAN_POINT('',(118.267841,-110.333178,1.585)); +#147498 = VECTOR('',#147499,1.); +#147499 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#147500 = ORIENTED_EDGE('',*,*,#147501,.T.); +#147501 = EDGE_CURVE('',#147494,#147502,#147504,.T.); +#147502 = VERTEX_POINT('',#147503); +#147503 = CARTESIAN_POINT('',(118.220759,-110.49619,1.585)); +#147504 = CIRCLE('',#147505,7.500003178655E-02); +#147505 = AXIS2_PLACEMENT_3D('',#147506,#147507,#147508); +#147506 = CARTESIAN_POINT('',(118.27379156212,-110.4431565,1.585)); +#147507 = DIRECTION('',(0.,0.,-1.)); +#147508 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#147509 = ORIENTED_EDGE('',*,*,#147510,.T.); +#147510 = EDGE_CURVE('',#147502,#147511,#147513,.T.); +#147511 = VERTEX_POINT('',#147512); +#147512 = CARTESIAN_POINT('',(118.185659,-110.46109,1.585)); +#147513 = LINE('',#147514,#147515); +#147514 = CARTESIAN_POINT('',(118.220759,-110.49619,1.585)); +#147515 = VECTOR('',#147516,1.); +#147516 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#147517 = ORIENTED_EDGE('',*,*,#147518,.T.); +#147518 = EDGE_CURVE('',#147511,#147519,#147521,.T.); +#147519 = VERTEX_POINT('',#147520); +#147520 = CARTESIAN_POINT('',(117.885735,-110.46109,1.585)); +#147521 = CIRCLE('',#147522,0.299308637371); +#147522 = AXIS2_PLACEMENT_3D('',#147523,#147524,#147525); +#147523 = CARTESIAN_POINT('',(118.035697,-110.720121,1.585)); +#147524 = DIRECTION('',(0.,0.,1.)); +#147525 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#147526 = ORIENTED_EDGE('',*,*,#147527,.T.); +#147527 = EDGE_CURVE('',#147519,#147528,#147530,.T.); +#147528 = VERTEX_POINT('',#147529); +#147529 = CARTESIAN_POINT('',(117.811622,-110.535203,1.585)); +#147530 = LINE('',#147531,#147532); +#147531 = CARTESIAN_POINT('',(117.885735,-110.46109,1.585)); +#147532 = VECTOR('',#147533,1.); +#147533 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#147534 = ORIENTED_EDGE('',*,*,#147535,.T.); +#147535 = EDGE_CURVE('',#147528,#147536,#147538,.T.); +#147536 = VERTEX_POINT('',#147537); +#147537 = CARTESIAN_POINT('',(117.729745,-110.910113,1.585)); +#147538 = CIRCLE('',#147539,0.611712714363); +#147539 = AXIS2_PLACEMENT_3D('',#147540,#147541,#147542); +#147540 = CARTESIAN_POINT('',(118.33815027521,-110.8465876822,1.585)); +#147541 = DIRECTION('',(0.,0.,1.)); +#147542 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#147543 = ORIENTED_EDGE('',*,*,#147544,.T.); +#147544 = EDGE_CURVE('',#147536,#147545,#147547,.T.); +#147545 = VERTEX_POINT('',#147546); +#147546 = CARTESIAN_POINT('',(117.773128,-111.083647,1.585)); +#147547 = LINE('',#147548,#147549); +#147548 = CARTESIAN_POINT('',(117.729745,-110.910113,1.585)); +#147549 = VECTOR('',#147550,1.); +#147550 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#147551 = ORIENTED_EDGE('',*,*,#147552,.T.); +#147552 = EDGE_CURVE('',#147545,#147553,#147555,.T.); +#147553 = VERTEX_POINT('',#147554); +#147554 = CARTESIAN_POINT('',(117.811622,-111.160634,1.585)); +#147555 = LINE('',#147556,#147557); +#147556 = CARTESIAN_POINT('',(117.773128,-111.083647,1.585)); +#147557 = VECTOR('',#147558,1.); +#147558 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#147559 = ORIENTED_EDGE('',*,*,#147560,.T.); +#147560 = EDGE_CURVE('',#147553,#147561,#147563,.T.); +#147561 = VERTEX_POINT('',#147562); +#147562 = CARTESIAN_POINT('',(117.885735,-111.234748,1.585)); +#147563 = LINE('',#147564,#147565); +#147564 = CARTESIAN_POINT('',(117.811622,-111.160634,1.585)); +#147565 = VECTOR('',#147566,1.); +#147566 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#147567 = ORIENTED_EDGE('',*,*,#147568,.T.); +#147568 = EDGE_CURVE('',#147561,#147569,#147571,.T.); +#147569 = VERTEX_POINT('',#147570); +#147570 = CARTESIAN_POINT('',(118.185659,-111.234747,1.585)); +#147571 = CIRCLE('',#147572,0.299305962385); +#147572 = AXIS2_PLACEMENT_3D('',#147573,#147574,#147575); +#147573 = CARTESIAN_POINT('',(118.03569613635,-110.9757195909,1.585)); +#147574 = DIRECTION('',(0.,0.,1.)); +#147575 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#147576 = ORIENTED_EDGE('',*,*,#147577,.T.); +#147577 = EDGE_CURVE('',#147569,#147578,#147580,.T.); +#147578 = VERTEX_POINT('',#147579); +#147579 = CARTESIAN_POINT('',(118.232124,-111.19032,1.585)); +#147580 = LINE('',#147581,#147582); +#147581 = CARTESIAN_POINT('',(118.185659,-111.234747,1.585)); +#147582 = VECTOR('',#147583,1.); +#147583 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#147584 = ORIENTED_EDGE('',*,*,#147585,.T.); +#147585 = EDGE_CURVE('',#147578,#147586,#147588,.T.); +#147586 = VERTEX_POINT('',#147587); +#147587 = CARTESIAN_POINT('',(118.326825,-111.305713,1.585)); +#147588 = CIRCLE('',#147589,7.499993690112E-02); +#147589 = AXIS2_PLACEMENT_3D('',#147590,#147591,#147592); +#147590 = CARTESIAN_POINT('',(118.2737922483,-111.2526798237,1.585)); +#147591 = DIRECTION('',(0.,0.,-1.)); +#147592 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#147593 = ORIENTED_EDGE('',*,*,#147594,.T.); +#147594 = EDGE_CURVE('',#147586,#147595,#147597,.T.); +#147595 = VERTEX_POINT('',#147596); +#147596 = CARTESIAN_POINT('',(118.263315,-111.365457,1.585)); +#147597 = LINE('',#147598,#147599); +#147598 = CARTESIAN_POINT('',(118.326825,-111.305713,1.585)); +#147599 = VECTOR('',#147600,1.); +#147600 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#147601 = ORIENTED_EDGE('',*,*,#147602,.T.); +#147602 = EDGE_CURVE('',#147595,#147603,#147605,.T.); +#147603 = VERTEX_POINT('',#147604); +#147604 = CARTESIAN_POINT('',(117.803553,-111.362661,1.585)); +#147605 = CIRCLE('',#147606,0.461067828848); +#147606 = AXIS2_PLACEMENT_3D('',#147607,#147608,#147609); +#147607 = CARTESIAN_POINT('',(118.03586451268,-110.9643961335,1.585)); +#147608 = DIRECTION('',(-0.,0.,-1.)); +#147609 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#147610 = ORIENTED_EDGE('',*,*,#147611,.T.); +#147611 = EDGE_CURVE('',#147603,#147612,#147614,.T.); +#147612 = VERTEX_POINT('',#147613); +#147613 = CARTESIAN_POINT('',(117.686864,-111.244898,1.585)); +#147614 = LINE('',#147615,#147616); +#147615 = CARTESIAN_POINT('',(117.803553,-111.362661,1.585)); +#147616 = VECTOR('',#147617,1.); +#147617 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#147618 = ORIENTED_EDGE('',*,*,#147619,.T.); +#147619 = EDGE_CURVE('',#147612,#147620,#147622,.T.); +#147620 = VERTEX_POINT('',#147621); +#147621 = CARTESIAN_POINT('',(117.629603,-111.128013,1.585)); +#147622 = LINE('',#147623,#147624); +#147623 = CARTESIAN_POINT('',(117.686864,-111.244898,1.585)); +#147624 = VECTOR('',#147625,1.); +#147625 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#147626 = ORIENTED_EDGE('',*,*,#147627,.T.); +#147627 = EDGE_CURVE('',#147620,#147628,#147630,.T.); +#147628 = VERTEX_POINT('',#147629); +#147629 = CARTESIAN_POINT('',(117.579745,-110.919347,1.585)); +#147630 = LINE('',#147631,#147632); +#147631 = CARTESIAN_POINT('',(117.629603,-111.128013,1.585)); +#147632 = VECTOR('',#147633,1.); +#147633 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#147634 = ORIENTED_EDGE('',*,*,#147635,.T.); +#147635 = EDGE_CURVE('',#147628,#147636,#147638,.T.); +#147636 = VERTEX_POINT('',#147637); +#147637 = CARTESIAN_POINT('',(117.581984,-110.7583,1.585)); +#147638 = LINE('',#147639,#147640); +#147639 = CARTESIAN_POINT('',(117.579745,-110.919347,1.585)); +#147640 = VECTOR('',#147641,1.); +#147641 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#147642 = ORIENTED_EDGE('',*,*,#147643,.T.); +#147643 = EDGE_CURVE('',#147636,#147644,#147646,.T.); +#147644 = VERTEX_POINT('',#147645); +#147645 = CARTESIAN_POINT('',(117.635282,-110.552473,1.585)); +#147646 = LINE('',#147647,#147648); +#147647 = CARTESIAN_POINT('',(117.581984,-110.7583,1.585)); +#147648 = VECTOR('',#147649,1.); +#147649 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#147650 = ORIENTED_EDGE('',*,*,#147651,.T.); +#147651 = EDGE_CURVE('',#147644,#147652,#147654,.T.); +#147652 = VERTEX_POINT('',#147653); +#147653 = CARTESIAN_POINT('',(117.692231,-110.443492,1.585)); +#147654 = LINE('',#147655,#147656); +#147655 = CARTESIAN_POINT('',(117.635282,-110.552473,1.585)); +#147656 = VECTOR('',#147657,1.); +#147657 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#147658 = ORIENTED_EDGE('',*,*,#147659,.T.); +#147659 = EDGE_CURVE('',#147652,#147483,#147660,.T.); +#147660 = LINE('',#147661,#147662); +#147661 = CARTESIAN_POINT('',(117.692231,-110.443492,1.585)); +#147662 = VECTOR('',#147663,1.); +#147663 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#147664 = PLANE('',#147665); +#147665 = AXIS2_PLACEMENT_3D('',#147666,#147667,#147668); +#147666 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147667 = DIRECTION('',(0.,0.,1.)); +#147668 = DIRECTION('',(1.,0.,-0.)); +#147669 = SHELL_BASED_SURFACE_MODEL('',(#147670)); +#147670 = OPEN_SHELL('',(#147671)); +#147671 = ADVANCED_FACE('',(#147672),#147857,.T.); +#147672 = FACE_BOUND('',#147673,.F.); +#147673 = EDGE_LOOP('',(#147674,#147685,#147693,#147702,#147710,#147719, + #147727,#147736,#147744,#147752,#147760,#147769,#147777,#147786, + #147794,#147803,#147811,#147819,#147827,#147835,#147843,#147851)); +#147674 = ORIENTED_EDGE('',*,*,#147675,.T.); +#147675 = EDGE_CURVE('',#147676,#147678,#147680,.T.); +#147676 = VERTEX_POINT('',#147677); +#147677 = CARTESIAN_POINT('',(135.831888,-110.330381,1.585)); +#147678 = VERTEX_POINT('',#147679); +#147679 = CARTESIAN_POINT('',(136.291651,-110.333178,1.585)); +#147680 = CIRCLE('',#147681,0.460785175821); +#147681 = AXIS2_PLACEMENT_3D('',#147682,#147683,#147684); +#147682 = CARTESIAN_POINT('',(136.05934010897,-110.7311159702,1.585)); +#147683 = DIRECTION('',(0.,0.,-1.)); +#147684 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#147685 = ORIENTED_EDGE('',*,*,#147686,.T.); +#147686 = EDGE_CURVE('',#147678,#147687,#147689,.T.); +#147687 = VERTEX_POINT('',#147688); +#147688 = CARTESIAN_POINT('',(136.359962,-110.401489,1.585)); +#147689 = LINE('',#147690,#147691); +#147690 = CARTESIAN_POINT('',(136.291651,-110.333178,1.585)); +#147691 = VECTOR('',#147692,1.); +#147692 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#147693 = ORIENTED_EDGE('',*,*,#147694,.T.); +#147694 = EDGE_CURVE('',#147687,#147695,#147697,.T.); +#147695 = VERTEX_POINT('',#147696); +#147696 = CARTESIAN_POINT('',(136.244569,-110.49619,1.585)); +#147697 = CIRCLE('',#147698,7.500003178655E-02); +#147698 = AXIS2_PLACEMENT_3D('',#147699,#147700,#147701); +#147699 = CARTESIAN_POINT('',(136.29760156212,-110.4431565,1.585)); +#147700 = DIRECTION('',(0.,0.,-1.)); +#147701 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#147702 = ORIENTED_EDGE('',*,*,#147703,.T.); +#147703 = EDGE_CURVE('',#147695,#147704,#147706,.T.); +#147704 = VERTEX_POINT('',#147705); +#147705 = CARTESIAN_POINT('',(136.209469,-110.46109,1.585)); +#147706 = LINE('',#147707,#147708); +#147707 = CARTESIAN_POINT('',(136.244569,-110.49619,1.585)); +#147708 = VECTOR('',#147709,1.); +#147709 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#147710 = ORIENTED_EDGE('',*,*,#147711,.T.); +#147711 = EDGE_CURVE('',#147704,#147712,#147714,.T.); +#147712 = VERTEX_POINT('',#147713); +#147713 = CARTESIAN_POINT('',(135.909545,-110.46109,1.585)); +#147714 = CIRCLE('',#147715,0.299308637371); +#147715 = AXIS2_PLACEMENT_3D('',#147716,#147717,#147718); +#147716 = CARTESIAN_POINT('',(136.059507,-110.720121,1.585)); +#147717 = DIRECTION('',(0.,0.,1.)); +#147718 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#147719 = ORIENTED_EDGE('',*,*,#147720,.T.); +#147720 = EDGE_CURVE('',#147712,#147721,#147723,.T.); +#147721 = VERTEX_POINT('',#147722); +#147722 = CARTESIAN_POINT('',(135.835432,-110.535203,1.585)); +#147723 = LINE('',#147724,#147725); +#147724 = CARTESIAN_POINT('',(135.909545,-110.46109,1.585)); +#147725 = VECTOR('',#147726,1.); +#147726 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#147727 = ORIENTED_EDGE('',*,*,#147728,.T.); +#147728 = EDGE_CURVE('',#147721,#147729,#147731,.T.); +#147729 = VERTEX_POINT('',#147730); +#147730 = CARTESIAN_POINT('',(135.753555,-110.910113,1.585)); +#147731 = CIRCLE('',#147732,0.611712714363); +#147732 = AXIS2_PLACEMENT_3D('',#147733,#147734,#147735); +#147733 = CARTESIAN_POINT('',(136.36196027521,-110.8465876822,1.585)); +#147734 = DIRECTION('',(0.,0.,1.)); +#147735 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#147736 = ORIENTED_EDGE('',*,*,#147737,.T.); +#147737 = EDGE_CURVE('',#147729,#147738,#147740,.T.); +#147738 = VERTEX_POINT('',#147739); +#147739 = CARTESIAN_POINT('',(135.796938,-111.083647,1.585)); +#147740 = LINE('',#147741,#147742); +#147741 = CARTESIAN_POINT('',(135.753555,-110.910113,1.585)); +#147742 = VECTOR('',#147743,1.); +#147743 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#147744 = ORIENTED_EDGE('',*,*,#147745,.T.); +#147745 = EDGE_CURVE('',#147738,#147746,#147748,.T.); +#147746 = VERTEX_POINT('',#147747); +#147747 = CARTESIAN_POINT('',(135.835432,-111.160634,1.585)); +#147748 = LINE('',#147749,#147750); +#147749 = CARTESIAN_POINT('',(135.796938,-111.083647,1.585)); +#147750 = VECTOR('',#147751,1.); +#147751 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#147752 = ORIENTED_EDGE('',*,*,#147753,.T.); +#147753 = EDGE_CURVE('',#147746,#147754,#147756,.T.); +#147754 = VERTEX_POINT('',#147755); +#147755 = CARTESIAN_POINT('',(135.909545,-111.234748,1.585)); +#147756 = LINE('',#147757,#147758); +#147757 = CARTESIAN_POINT('',(135.835432,-111.160634,1.585)); +#147758 = VECTOR('',#147759,1.); +#147759 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#147760 = ORIENTED_EDGE('',*,*,#147761,.T.); +#147761 = EDGE_CURVE('',#147754,#147762,#147764,.T.); +#147762 = VERTEX_POINT('',#147763); +#147763 = CARTESIAN_POINT('',(136.209469,-111.234747,1.585)); +#147764 = CIRCLE('',#147765,0.299305962385); +#147765 = AXIS2_PLACEMENT_3D('',#147766,#147767,#147768); +#147766 = CARTESIAN_POINT('',(136.05950613635,-110.9757195909,1.585)); +#147767 = DIRECTION('',(0.,0.,1.)); +#147768 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#147769 = ORIENTED_EDGE('',*,*,#147770,.T.); +#147770 = EDGE_CURVE('',#147762,#147771,#147773,.T.); +#147771 = VERTEX_POINT('',#147772); +#147772 = CARTESIAN_POINT('',(136.255934,-111.19032,1.585)); +#147773 = LINE('',#147774,#147775); +#147774 = CARTESIAN_POINT('',(136.209469,-111.234747,1.585)); +#147775 = VECTOR('',#147776,1.); +#147776 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#147777 = ORIENTED_EDGE('',*,*,#147778,.T.); +#147778 = EDGE_CURVE('',#147771,#147779,#147781,.T.); +#147779 = VERTEX_POINT('',#147780); +#147780 = CARTESIAN_POINT('',(136.350635,-111.305713,1.585)); +#147781 = CIRCLE('',#147782,7.499993690113E-02); +#147782 = AXIS2_PLACEMENT_3D('',#147783,#147784,#147785); +#147783 = CARTESIAN_POINT('',(136.2976022483,-111.2526798237,1.585)); +#147784 = DIRECTION('',(0.,0.,-1.)); +#147785 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#147786 = ORIENTED_EDGE('',*,*,#147787,.T.); +#147787 = EDGE_CURVE('',#147779,#147788,#147790,.T.); +#147788 = VERTEX_POINT('',#147789); +#147789 = CARTESIAN_POINT('',(136.287125,-111.365457,1.585)); +#147790 = LINE('',#147791,#147792); +#147791 = CARTESIAN_POINT('',(136.350635,-111.305713,1.585)); +#147792 = VECTOR('',#147793,1.); +#147793 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#147794 = ORIENTED_EDGE('',*,*,#147795,.T.); +#147795 = EDGE_CURVE('',#147788,#147796,#147798,.T.); +#147796 = VERTEX_POINT('',#147797); +#147797 = CARTESIAN_POINT('',(135.827363,-111.362661,1.585)); +#147798 = CIRCLE('',#147799,0.461067828848); +#147799 = AXIS2_PLACEMENT_3D('',#147800,#147801,#147802); +#147800 = CARTESIAN_POINT('',(136.05967451268,-110.9643961335,1.585)); +#147801 = DIRECTION('',(-0.,0.,-1.)); +#147802 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#147803 = ORIENTED_EDGE('',*,*,#147804,.T.); +#147804 = EDGE_CURVE('',#147796,#147805,#147807,.T.); +#147805 = VERTEX_POINT('',#147806); +#147806 = CARTESIAN_POINT('',(135.710674,-111.244898,1.585)); +#147807 = LINE('',#147808,#147809); +#147808 = CARTESIAN_POINT('',(135.827363,-111.362661,1.585)); +#147809 = VECTOR('',#147810,1.); +#147810 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#147811 = ORIENTED_EDGE('',*,*,#147812,.T.); +#147812 = EDGE_CURVE('',#147805,#147813,#147815,.T.); +#147813 = VERTEX_POINT('',#147814); +#147814 = CARTESIAN_POINT('',(135.653413,-111.128013,1.585)); +#147815 = LINE('',#147816,#147817); +#147816 = CARTESIAN_POINT('',(135.710674,-111.244898,1.585)); +#147817 = VECTOR('',#147818,1.); +#147818 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#147819 = ORIENTED_EDGE('',*,*,#147820,.T.); +#147820 = EDGE_CURVE('',#147813,#147821,#147823,.T.); +#147821 = VERTEX_POINT('',#147822); +#147822 = CARTESIAN_POINT('',(135.603555,-110.919347,1.585)); +#147823 = LINE('',#147824,#147825); +#147824 = CARTESIAN_POINT('',(135.653413,-111.128013,1.585)); +#147825 = VECTOR('',#147826,1.); +#147826 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#147827 = ORIENTED_EDGE('',*,*,#147828,.T.); +#147828 = EDGE_CURVE('',#147821,#147829,#147831,.T.); +#147829 = VERTEX_POINT('',#147830); +#147830 = CARTESIAN_POINT('',(135.605794,-110.7583,1.585)); +#147831 = LINE('',#147832,#147833); +#147832 = CARTESIAN_POINT('',(135.603555,-110.919347,1.585)); +#147833 = VECTOR('',#147834,1.); +#147834 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#147835 = ORIENTED_EDGE('',*,*,#147836,.T.); +#147836 = EDGE_CURVE('',#147829,#147837,#147839,.T.); +#147837 = VERTEX_POINT('',#147838); +#147838 = CARTESIAN_POINT('',(135.659092,-110.552473,1.585)); +#147839 = LINE('',#147840,#147841); +#147840 = CARTESIAN_POINT('',(135.605794,-110.7583,1.585)); +#147841 = VECTOR('',#147842,1.); +#147842 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#147843 = ORIENTED_EDGE('',*,*,#147844,.T.); +#147844 = EDGE_CURVE('',#147837,#147845,#147847,.T.); +#147845 = VERTEX_POINT('',#147846); +#147846 = CARTESIAN_POINT('',(135.716041,-110.443492,1.585)); +#147847 = LINE('',#147848,#147849); +#147848 = CARTESIAN_POINT('',(135.659092,-110.552473,1.585)); +#147849 = VECTOR('',#147850,1.); +#147850 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#147851 = ORIENTED_EDGE('',*,*,#147852,.T.); +#147852 = EDGE_CURVE('',#147845,#147676,#147853,.T.); +#147853 = LINE('',#147854,#147855); +#147854 = CARTESIAN_POINT('',(135.716041,-110.443492,1.585)); +#147855 = VECTOR('',#147856,1.); +#147856 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#147857 = PLANE('',#147858); +#147858 = AXIS2_PLACEMENT_3D('',#147859,#147860,#147861); +#147859 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147860 = DIRECTION('',(0.,0.,1.)); +#147861 = DIRECTION('',(1.,0.,-0.)); +#147862 = SHELL_BASED_SURFACE_MODEL('',(#147863)); +#147863 = OPEN_SHELL('',(#147864)); +#147864 = ADVANCED_FACE('',(#147865),#147926,.T.); +#147865 = FACE_BOUND('',#147866,.F.); +#147866 = EDGE_LOOP('',(#147867,#147878,#147886,#147895,#147903,#147912, + #147920)); +#147867 = ORIENTED_EDGE('',*,*,#147868,.T.); +#147868 = EDGE_CURVE('',#147869,#147871,#147873,.T.); +#147869 = VERTEX_POINT('',#147870); +#147870 = CARTESIAN_POINT('',(103.068685,-110.421478,1.585)); +#147871 = VERTEX_POINT('',#147872); +#147872 = CARTESIAN_POINT('',(103.083317,-110.272919,1.585)); +#147873 = CIRCLE('',#147874,7.500006711463E-02); +#147874 = AXIS2_PLACEMENT_3D('',#147875,#147876,#147877); +#147875 = CARTESIAN_POINT('',(103.08331693288,-110.3479190671,1.585)); +#147876 = DIRECTION('',(0.,0.,-1.)); +#147877 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#147878 = ORIENTED_EDGE('',*,*,#147879,.T.); +#147879 = EDGE_CURVE('',#147871,#147880,#147882,.T.); +#147880 = VERTEX_POINT('',#147881); +#147881 = CARTESIAN_POINT('',(103.764615,-110.27436,1.585)); +#147882 = LINE('',#147883,#147884); +#147883 = CARTESIAN_POINT('',(103.083317,-110.272919,1.585)); +#147884 = VECTOR('',#147885,1.); +#147885 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#147886 = ORIENTED_EDGE('',*,*,#147887,.T.); +#147887 = EDGE_CURVE('',#147880,#147888,#147890,.T.); +#147888 = VERTEX_POINT('',#147889); +#147889 = CARTESIAN_POINT('',(103.818919,-110.377463,1.585)); +#147890 = CIRCLE('',#147891,7.500015546833E-02); +#147891 = AXIS2_PLACEMENT_3D('',#147892,#147893,#147894); +#147892 = CARTESIAN_POINT('',(103.74998297422,-110.3479190044,1.585)); +#147893 = DIRECTION('',(0.,0.,-1.)); +#147894 = DIRECTION('',(0.195093272598,0.980784693491,0.)); +#147895 = ORIENTED_EDGE('',*,*,#147896,.T.); +#147896 = EDGE_CURVE('',#147888,#147897,#147899,.T.); +#147897 = VERTEX_POINT('',#147898); +#147898 = CARTESIAN_POINT('',(103.38326,-111.390344,1.585)); +#147899 = LINE('',#147900,#147901); +#147900 = CARTESIAN_POINT('',(103.818919,-110.377463,1.585)); +#147901 = VECTOR('',#147902,1.); +#147902 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#147903 = ORIENTED_EDGE('',*,*,#147904,.T.); +#147904 = EDGE_CURVE('',#147897,#147905,#147907,.T.); +#147905 = VERTEX_POINT('',#147906); +#147906 = CARTESIAN_POINT('',(103.252476,-111.318375,1.585)); +#147907 = CIRCLE('',#147908,7.500030178421E-02); +#147908 = AXIS2_PLACEMENT_3D('',#147909,#147910,#147911); +#147909 = CARTESIAN_POINT('',(103.32141234698,-111.3479186174,1.585)); +#147910 = DIRECTION('',(-0.,0.,-1.)); +#147911 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#147912 = ORIENTED_EDGE('',*,*,#147913,.T.); +#147913 = EDGE_CURVE('',#147905,#147914,#147916,.T.); +#147914 = VERTEX_POINT('',#147915); +#147915 = CARTESIAN_POINT('',(103.636242,-110.422919,1.585)); +#147916 = LINE('',#147917,#147918); +#147917 = CARTESIAN_POINT('',(103.252476,-111.318375,1.585)); +#147918 = VECTOR('',#147919,1.); +#147919 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#147920 = ORIENTED_EDGE('',*,*,#147921,.T.); +#147921 = EDGE_CURVE('',#147914,#147869,#147922,.T.); +#147922 = LINE('',#147923,#147924); +#147923 = CARTESIAN_POINT('',(103.636242,-110.422919,1.585)); +#147924 = VECTOR('',#147925,1.); +#147925 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#147926 = PLANE('',#147927); +#147927 = AXIS2_PLACEMENT_3D('',#147928,#147929,#147930); +#147928 = CARTESIAN_POINT('',(0.,0.,1.585)); +#147929 = DIRECTION('',(0.,0.,1.)); +#147930 = DIRECTION('',(1.,0.,-0.)); +#147931 = SHELL_BASED_SURFACE_MODEL('',(#147932)); +#147932 = OPEN_SHELL('',(#147933)); +#147933 = ADVANCED_FACE('',(#147934),#148129,.T.); +#147934 = FACE_BOUND('',#147935,.F.); +#147935 = EDGE_LOOP('',(#147936,#147947,#147955,#147964,#147972,#147980, + #147988,#147996,#148005,#148013,#148022,#148030,#148038,#148046, + #148055,#148063,#148072,#148080,#148089,#148097,#148106,#148114, + #148123)); +#147936 = ORIENTED_EDGE('',*,*,#147937,.T.); +#147937 = EDGE_CURVE('',#147938,#147940,#147942,.T.); +#147938 = VERTEX_POINT('',#147939); +#147939 = CARTESIAN_POINT('',(92.431817,-110.32604,1.585)); +#147940 = VERTEX_POINT('',#147941); +#147941 = CARTESIAN_POINT('',(92.503555,-110.272919,1.585)); +#147942 = CIRCLE('',#147943,7.50033610077E-02); +#147943 = AXIS2_PLACEMENT_3D('',#147944,#147945,#147946); +#147944 = CARTESIAN_POINT('',(92.503557270704,-110.3479223609,1.585)); +#147945 = DIRECTION('',(0.,0.,-1.)); +#147946 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#147947 = ORIENTED_EDGE('',*,*,#147948,.T.); +#147948 = EDGE_CURVE('',#147940,#147949,#147951,.T.); +#147949 = VERTEX_POINT('',#147950); +#147950 = CARTESIAN_POINT('',(92.994377,-110.27436,1.585)); +#147951 = LINE('',#147952,#147953); +#147952 = CARTESIAN_POINT('',(92.503555,-110.272919,1.585)); +#147953 = VECTOR('',#147954,1.); +#147954 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#147955 = ORIENTED_EDGE('',*,*,#147956,.T.); +#147956 = EDGE_CURVE('',#147949,#147957,#147959,.T.); +#147957 = VERTEX_POINT('',#147958); +#147958 = CARTESIAN_POINT('',(92.979745,-110.422919,1.585)); +#147959 = CIRCLE('',#147960,7.500006711464E-02); +#147960 = AXIS2_PLACEMENT_3D('',#147961,#147962,#147963); +#147961 = CARTESIAN_POINT('',(92.979745067115,-110.3479189328,1.585)); +#147962 = DIRECTION('',(0.,0.,-1.)); +#147963 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#147964 = ORIENTED_EDGE('',*,*,#147965,.T.); +#147965 = EDGE_CURVE('',#147957,#147966,#147968,.T.); +#147966 = VERTEX_POINT('',#147967); +#147967 = CARTESIAN_POINT('',(92.571429,-110.422919,1.585)); +#147968 = LINE('',#147969,#147970); +#147969 = CARTESIAN_POINT('',(92.979745,-110.422919,1.585)); +#147970 = VECTOR('',#147971,1.); +#147971 = DIRECTION('',(-1.,0.,0.)); +#147972 = ORIENTED_EDGE('',*,*,#147973,.T.); +#147973 = EDGE_CURVE('',#147966,#147974,#147976,.T.); +#147974 = VERTEX_POINT('',#147975); +#147975 = CARTESIAN_POINT('',(92.54661,-110.671109,1.585)); +#147976 = LINE('',#147977,#147978); +#147977 = CARTESIAN_POINT('',(92.571429,-110.422919,1.585)); +#147978 = VECTOR('',#147979,1.); +#147979 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#147980 = ORIENTED_EDGE('',*,*,#147981,.T.); +#147981 = EDGE_CURVE('',#147974,#147982,#147984,.T.); +#147982 = VERTEX_POINT('',#147983); +#147983 = CARTESIAN_POINT('',(92.584161,-110.655312,1.585)); +#147984 = LINE('',#147985,#147986); +#147985 = CARTESIAN_POINT('',(92.54661,-110.671109,1.585)); +#147986 = VECTOR('',#147987,1.); +#147987 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#147988 = ORIENTED_EDGE('',*,*,#147989,.T.); +#147989 = EDGE_CURVE('',#147982,#147990,#147992,.T.); +#147990 = VERTEX_POINT('',#147991); +#147991 = CARTESIAN_POINT('',(92.856697,-110.656534,1.585)); +#147992 = LINE('',#147993,#147994); +#147993 = CARTESIAN_POINT('',(92.584161,-110.655312,1.585)); +#147994 = VECTOR('',#147995,1.); +#147995 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#147996 = ORIENTED_EDGE('',*,*,#147997,.T.); +#147997 = EDGE_CURVE('',#147990,#147998,#148000,.T.); +#147998 = VERTEX_POINT('',#147999); +#147999 = CARTESIAN_POINT('',(93.100923,-110.904715,1.585)); +#148000 = CIRCLE('',#148001,0.348625649748); +#148001 = AXIS2_PLACEMENT_3D('',#148002,#148003,#148004); +#148002 = CARTESIAN_POINT('',(92.763525045865,-110.9924786838,1.585)); +#148003 = DIRECTION('',(0.,0.,-1.)); +#148004 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#148005 = ORIENTED_EDGE('',*,*,#148006,.T.); +#148006 = EDGE_CURVE('',#147998,#148007,#148009,.T.); +#148007 = VERTEX_POINT('',#148008); +#148008 = CARTESIAN_POINT('',(93.099701,-111.177252,1.585)); +#148009 = LINE('',#148010,#148011); +#148010 = CARTESIAN_POINT('',(93.100923,-110.904715,1.585)); +#148011 = VECTOR('',#148012,1.); +#148012 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#148013 = ORIENTED_EDGE('',*,*,#148014,.T.); +#148014 = EDGE_CURVE('',#148007,#148015,#148017,.T.); +#148015 = VERTEX_POINT('',#148016); +#148016 = CARTESIAN_POINT('',(92.85152,-111.421478,1.585)); +#148017 = CIRCLE('',#148018,0.348635327447); +#148018 = AXIS2_PLACEMENT_3D('',#148019,#148020,#148021); +#148019 = CARTESIAN_POINT('',(92.763748481291,-111.0840720841,1.585)); +#148020 = DIRECTION('',(0.,0.,-1.)); +#148021 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#148022 = ORIENTED_EDGE('',*,*,#148023,.T.); +#148023 = EDGE_CURVE('',#148015,#148024,#148026,.T.); +#148024 = VERTEX_POINT('',#148025); +#148025 = CARTESIAN_POINT('',(92.578983,-111.420256,1.585)); +#148026 = LINE('',#148027,#148028); +#148027 = CARTESIAN_POINT('',(92.85152,-111.421478,1.585)); +#148028 = VECTOR('',#148029,1.); +#148029 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#148030 = ORIENTED_EDGE('',*,*,#148031,.T.); +#148031 = EDGE_CURVE('',#148024,#148032,#148034,.T.); +#148032 = VERTEX_POINT('',#148033); +#148033 = CARTESIAN_POINT('',(92.45627,-111.35805,1.585)); +#148034 = LINE('',#148035,#148036); +#148035 = CARTESIAN_POINT('',(92.578983,-111.420256,1.585)); +#148036 = VECTOR('',#148037,1.); +#148037 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#148038 = ORIENTED_EDGE('',*,*,#148039,.T.); +#148039 = EDGE_CURVE('',#148032,#148040,#148042,.T.); +#148040 = VERTEX_POINT('',#148041); +#148041 = CARTESIAN_POINT('',(92.393575,-111.294347,1.585)); +#148042 = LINE('',#148043,#148044); +#148043 = CARTESIAN_POINT('',(92.45627,-111.35805,1.585)); +#148044 = VECTOR('',#148045,1.); +#148045 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#148046 = ORIENTED_EDGE('',*,*,#148047,.T.); +#148047 = EDGE_CURVE('',#148040,#148048,#148050,.T.); +#148048 = VERTEX_POINT('',#148049); +#148049 = CARTESIAN_POINT('',(92.50897,-111.199648,1.585)); +#148050 = CIRCLE('',#148051,7.50001266804E-02); +#148051 = AXIS2_PLACEMENT_3D('',#148052,#148053,#148054); +#148052 = CARTESIAN_POINT('',(92.455936051994,-111.2526802483,1.585)); +#148053 = DIRECTION('',(0.,0.,-1.)); +#148054 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#148055 = ORIENTED_EDGE('',*,*,#148056,.T.); +#148056 = EDGE_CURVE('',#148048,#148057,#148059,.T.); +#148057 = VERTEX_POINT('',#148058); +#148058 = CARTESIAN_POINT('',(92.547982,-111.238661,1.585)); +#148059 = LINE('',#148060,#148061); +#148060 = CARTESIAN_POINT('',(92.50897,-111.199648,1.585)); +#148061 = VECTOR('',#148062,1.); +#148062 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#148063 = ORIENTED_EDGE('',*,*,#148064,.T.); +#148064 = EDGE_CURVE('',#148057,#148065,#148067,.T.); +#148065 = VERTEX_POINT('',#148066); +#148066 = CARTESIAN_POINT('',(92.887698,-111.238661,1.585)); +#148067 = CIRCLE('',#148068,0.305620374329); +#148068 = AXIS2_PLACEMENT_3D('',#148069,#148070,#148071); +#148069 = CARTESIAN_POINT('',(92.71784,-110.98459,1.585)); +#148070 = DIRECTION('',(0.,0.,1.)); +#148071 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#148072 = ORIENTED_EDGE('',*,*,#148073,.T.); +#148073 = EDGE_CURVE('',#148065,#148074,#148076,.T.); +#148074 = VERTEX_POINT('',#148075); +#148075 = CARTESIAN_POINT('',(92.918105,-111.208253,1.585)); +#148076 = LINE('',#148077,#148078); +#148077 = CARTESIAN_POINT('',(92.887698,-111.238661,1.585)); +#148078 = VECTOR('',#148079,1.); +#148079 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#148080 = ORIENTED_EDGE('',*,*,#148081,.T.); +#148081 = EDGE_CURVE('',#148074,#148082,#148084,.T.); +#148082 = VERTEX_POINT('',#148083); +#148083 = CARTESIAN_POINT('',(92.918106,-110.868536,1.585)); +#148084 = CIRCLE('',#148085,0.305616146029); +#148085 = AXIS2_PLACEMENT_3D('',#148086,#148087,#148088); +#148086 = CARTESIAN_POINT('',(92.664039920493,-111.0383937521,1.585)); +#148087 = DIRECTION('',(0.,-0.,1.)); +#148088 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#148089 = ORIENTED_EDGE('',*,*,#148090,.T.); +#148090 = EDGE_CURVE('',#148082,#148091,#148093,.T.); +#148091 = VERTEX_POINT('',#148092); +#148092 = CARTESIAN_POINT('',(92.887699,-110.838129,1.585)); +#148093 = LINE('',#148094,#148095); +#148094 = CARTESIAN_POINT('',(92.918106,-110.868536,1.585)); +#148095 = VECTOR('',#148096,1.); +#148096 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#148097 = ORIENTED_EDGE('',*,*,#148098,.T.); +#148098 = EDGE_CURVE('',#148091,#148099,#148101,.T.); +#148099 = VERTEX_POINT('',#148100); +#148100 = CARTESIAN_POINT('',(92.547982,-110.838129,1.585)); +#148101 = CIRCLE('',#148102,0.305621483548); +#148102 = AXIS2_PLACEMENT_3D('',#148103,#148104,#148105); +#148103 = CARTESIAN_POINT('',(92.7178405,-111.092201,1.585)); +#148104 = DIRECTION('',(0.,0.,1.)); +#148105 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#148106 = ORIENTED_EDGE('',*,*,#148107,.T.); +#148107 = EDGE_CURVE('',#148099,#148108,#148110,.T.); +#148108 = VERTEX_POINT('',#148109); +#148109 = CARTESIAN_POINT('',(92.491192,-110.890306,1.585)); +#148110 = LINE('',#148111,#148112); +#148111 = CARTESIAN_POINT('',(92.547982,-110.838129,1.585)); +#148112 = VECTOR('',#148113,1.); +#148113 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#148114 = ORIENTED_EDGE('',*,*,#148115,.T.); +#148115 = EDGE_CURVE('',#148108,#148116,#148118,.T.); +#148116 = VERTEX_POINT('',#148117); +#148117 = CARTESIAN_POINT('',(92.381286,-110.831349,1.585)); +#148118 = CIRCLE('',#148119,7.500024172471E-02); +#148119 = AXIS2_PLACEMENT_3D('',#148120,#148121,#148122); +#148120 = CARTESIAN_POINT('',(92.455935970023,-110.8241089561,1.585)); +#148121 = DIRECTION('',(-0.,0.,-1.)); +#148122 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#148123 = ORIENTED_EDGE('',*,*,#148124,.T.); +#148124 = EDGE_CURVE('',#148116,#147938,#148125,.T.); +#148125 = LINE('',#148126,#148127); +#148126 = CARTESIAN_POINT('',(92.381286,-110.831349,1.585)); +#148127 = VECTOR('',#148128,1.); +#148128 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#148129 = PLANE('',#148130); +#148130 = AXIS2_PLACEMENT_3D('',#148131,#148132,#148133); +#148131 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148132 = DIRECTION('',(0.,0.,1.)); +#148133 = DIRECTION('',(1.,0.,-0.)); +#148134 = SHELL_BASED_SURFACE_MODEL('',(#148135)); +#148135 = OPEN_SHELL('',(#148136)); +#148136 = ADVANCED_FACE('',(#148137,#148309),#148360,.T.); +#148137 = FACE_BOUND('',#148138,.F.); +#148138 = EDGE_LOOP('',(#148139,#148150,#148158,#148166,#148174,#148182, + #148190,#148198,#148206,#148214,#148222,#148230,#148238,#148247, + #148255,#148263,#148271,#148279,#148287,#148295,#148303)); +#148139 = ORIENTED_EDGE('',*,*,#148140,.T.); +#148140 = EDGE_CURVE('',#148141,#148143,#148145,.T.); +#148141 = VERTEX_POINT('',#148142); +#148142 = CARTESIAN_POINT('',(95.502157,-110.661789,1.585)); +#148143 = VERTEX_POINT('',#148144); +#148144 = CARTESIAN_POINT('',(95.962634,-110.669621,1.585)); +#148145 = CIRCLE('',#148146,0.398777683503); +#148146 = AXIS2_PLACEMENT_3D('',#148147,#148148,#148149); +#148147 = CARTESIAN_POINT('',(95.726858788855,-110.991232086,1.585)); +#148148 = DIRECTION('',(0.,0.,-1.)); +#148149 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#148150 = ORIENTED_EDGE('',*,*,#148151,.T.); +#148151 = EDGE_CURVE('',#148143,#148152,#148154,.T.); +#148152 = VERTEX_POINT('',#148153); +#148153 = CARTESIAN_POINT('',(95.983732,-110.69533,1.585)); +#148154 = LINE('',#148155,#148156); +#148155 = CARTESIAN_POINT('',(95.962634,-110.669621,1.585)); +#148156 = VECTOR('',#148157,1.); +#148157 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#148158 = ORIENTED_EDGE('',*,*,#148159,.T.); +#148159 = EDGE_CURVE('',#148152,#148160,#148162,.T.); +#148160 = VERTEX_POINT('',#148161); +#148161 = CARTESIAN_POINT('',(96.037828,-110.809477,1.585)); +#148162 = LINE('',#148163,#148164); +#148163 = CARTESIAN_POINT('',(95.983732,-110.69533,1.585)); +#148164 = VECTOR('',#148165,1.); +#148165 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#148166 = ORIENTED_EDGE('',*,*,#148167,.T.); +#148167 = EDGE_CURVE('',#148160,#148168,#148170,.T.); +#148168 = VERTEX_POINT('',#148169); +#148169 = CARTESIAN_POINT('',(96.037828,-110.933979,1.585)); +#148170 = LINE('',#148171,#148172); +#148171 = CARTESIAN_POINT('',(96.037828,-110.809477,1.585)); +#148172 = VECTOR('',#148173,1.); +#148173 = DIRECTION('',(0.,-1.,0.)); +#148174 = ORIENTED_EDGE('',*,*,#148175,.T.); +#148175 = EDGE_CURVE('',#148168,#148176,#148178,.T.); +#148176 = VERTEX_POINT('',#148177); +#148177 = CARTESIAN_POINT('',(96.017357,-110.972324,1.585)); +#148178 = LINE('',#148179,#148180); +#148179 = CARTESIAN_POINT('',(96.037828,-110.933979,1.585)); +#148180 = VECTOR('',#148181,1.); +#148181 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#148182 = ORIENTED_EDGE('',*,*,#148183,.T.); +#148183 = EDGE_CURVE('',#148176,#148184,#148186,.T.); +#148184 = VERTEX_POINT('',#148185); +#148185 = CARTESIAN_POINT('',(95.978977,-110.992891,1.585)); +#148186 = LINE('',#148187,#148188); +#148187 = CARTESIAN_POINT('',(96.017357,-110.972324,1.585)); +#148188 = VECTOR('',#148189,1.); +#148189 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#148190 = ORIENTED_EDGE('',*,*,#148191,.T.); +#148191 = EDGE_CURVE('',#148184,#148192,#148194,.T.); +#148192 = VERTEX_POINT('',#148193); +#148193 = CARTESIAN_POINT('',(95.563079,-111.07607,1.585)); +#148194 = LINE('',#148195,#148196); +#148195 = CARTESIAN_POINT('',(95.978977,-110.992891,1.585)); +#148196 = VECTOR('',#148197,1.); +#148197 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#148198 = ORIENTED_EDGE('',*,*,#148199,.T.); +#148199 = EDGE_CURVE('',#148192,#148200,#148202,.T.); +#148200 = VERTEX_POINT('',#148201); +#148201 = CARTESIAN_POINT('',(95.563079,-111.187356,1.585)); +#148202 = LINE('',#148203,#148204); +#148203 = CARTESIAN_POINT('',(95.563079,-111.07607,1.585)); +#148204 = VECTOR('',#148205,1.); +#148205 = DIRECTION('',(0.,-1.,0.)); +#148206 = ORIENTED_EDGE('',*,*,#148207,.T.); +#148207 = EDGE_CURVE('',#148200,#148208,#148210,.T.); +#148208 = VERTEX_POINT('',#148209); +#148209 = CARTESIAN_POINT('',(95.591599,-111.244398,1.585)); +#148210 = LINE('',#148211,#148212); +#148211 = CARTESIAN_POINT('',(95.563079,-111.187356,1.585)); +#148212 = VECTOR('',#148213,1.); +#148213 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#148214 = ORIENTED_EDGE('',*,*,#148215,.T.); +#148215 = EDGE_CURVE('',#148208,#148216,#148218,.T.); +#148216 = VERTEX_POINT('',#148217); +#148217 = CARTESIAN_POINT('',(95.648641,-111.272919,1.585)); +#148218 = LINE('',#148219,#148220); +#148219 = CARTESIAN_POINT('',(95.591599,-111.244398,1.585)); +#148220 = VECTOR('',#148221,1.); +#148221 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#148222 = ORIENTED_EDGE('',*,*,#148223,.T.); +#148223 = EDGE_CURVE('',#148216,#148224,#148226,.T.); +#148224 = VERTEX_POINT('',#148225); +#148225 = CARTESIAN_POINT('',(95.803707,-111.272919,1.585)); +#148226 = LINE('',#148227,#148228); +#148227 = CARTESIAN_POINT('',(95.648641,-111.272919,1.585)); +#148228 = VECTOR('',#148229,1.); +#148229 = DIRECTION('',(1.,0.,0.)); +#148230 = ORIENTED_EDGE('',*,*,#148231,.T.); +#148231 = EDGE_CURVE('',#148224,#148232,#148234,.T.); +#148232 = VERTEX_POINT('',#148233); +#148233 = CARTESIAN_POINT('',(95.89684,-111.227963,1.585)); +#148234 = LINE('',#148235,#148236); +#148235 = CARTESIAN_POINT('',(95.803707,-111.272919,1.585)); +#148236 = VECTOR('',#148237,1.); +#148237 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#148238 = ORIENTED_EDGE('',*,*,#148239,.T.); +#148239 = EDGE_CURVE('',#148232,#148240,#148242,.T.); +#148240 = VERTEX_POINT('',#148241); +#148241 = CARTESIAN_POINT('',(95.950191,-111.367382,1.585)); +#148242 = CIRCLE('',#148243,7.500029440469E-02); +#148243 = AXIS2_PLACEMENT_3D('',#148244,#148245,#148246); +#148244 = CARTESIAN_POINT('',(95.916649351323,-111.300299946,1.585)); +#148245 = DIRECTION('',(0.,0.,-1.)); +#148246 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#148247 = ORIENTED_EDGE('',*,*,#148248,.T.); +#148248 = EDGE_CURVE('',#148240,#148249,#148251,.T.); +#148249 = VERTEX_POINT('',#148250); +#148250 = CARTESIAN_POINT('',(95.836044,-111.421478,1.585)); +#148251 = LINE('',#148252,#148253); +#148252 = CARTESIAN_POINT('',(95.950191,-111.367382,1.585)); +#148253 = VECTOR('',#148254,1.); +#148254 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#148255 = ORIENTED_EDGE('',*,*,#148256,.T.); +#148256 = EDGE_CURVE('',#148249,#148257,#148259,.T.); +#148257 = VERTEX_POINT('',#148258); +#148258 = CARTESIAN_POINT('',(95.611126,-111.420256,1.585)); +#148259 = LINE('',#148260,#148261); +#148260 = CARTESIAN_POINT('',(95.836044,-111.421478,1.585)); +#148261 = VECTOR('',#148262,1.); +#148262 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#148263 = ORIENTED_EDGE('',*,*,#148264,.T.); +#148264 = EDGE_CURVE('',#148257,#148265,#148267,.T.); +#148265 = VERTEX_POINT('',#148266); +#148266 = CARTESIAN_POINT('',(95.489714,-111.35955,1.585)); +#148267 = LINE('',#148268,#148269); +#148268 = CARTESIAN_POINT('',(95.611126,-111.420256,1.585)); +#148269 = VECTOR('',#148270,1.); +#148270 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#148271 = ORIENTED_EDGE('',*,*,#148272,.T.); +#148272 = EDGE_CURVE('',#148265,#148273,#148275,.T.); +#148273 = VERTEX_POINT('',#148274); +#148274 = CARTESIAN_POINT('',(95.468616,-111.333841,1.585)); +#148275 = LINE('',#148276,#148277); +#148276 = CARTESIAN_POINT('',(95.489714,-111.35955,1.585)); +#148277 = VECTOR('',#148278,1.); +#148278 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#148279 = ORIENTED_EDGE('',*,*,#148280,.T.); +#148280 = EDGE_CURVE('',#148273,#148281,#148283,.T.); +#148281 = VERTEX_POINT('',#148282); +#148282 = CARTESIAN_POINT('',(95.41452,-111.219693,1.585)); +#148283 = LINE('',#148284,#148285); +#148284 = CARTESIAN_POINT('',(95.468616,-111.333841,1.585)); +#148285 = VECTOR('',#148286,1.); +#148286 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#148287 = ORIENTED_EDGE('',*,*,#148288,.T.); +#148288 = EDGE_CURVE('',#148281,#148289,#148291,.T.); +#148289 = VERTEX_POINT('',#148290); +#148290 = CARTESIAN_POINT('',(95.415742,-110.8043,1.585)); +#148291 = LINE('',#148292,#148293); +#148292 = CARTESIAN_POINT('',(95.41452,-111.219693,1.585)); +#148293 = VECTOR('',#148294,1.); +#148294 = DIRECTION('',(2.941779741959E-03,0.999995672957,0.)); +#148295 = ORIENTED_EDGE('',*,*,#148296,.T.); +#148296 = EDGE_CURVE('',#148289,#148297,#148299,.T.); +#148297 = VERTEX_POINT('',#148298); +#148298 = CARTESIAN_POINT('',(95.476448,-110.682887,1.585)); +#148299 = LINE('',#148300,#148301); +#148300 = CARTESIAN_POINT('',(95.415742,-110.8043,1.585)); +#148301 = VECTOR('',#148302,1.); +#148302 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#148303 = ORIENTED_EDGE('',*,*,#148304,.T.); +#148304 = EDGE_CURVE('',#148297,#148141,#148305,.T.); +#148305 = LINE('',#148306,#148307); +#148306 = CARTESIAN_POINT('',(95.476448,-110.682887,1.585)); +#148307 = VECTOR('',#148308,1.); +#148308 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#148309 = FACE_BOUND('',#148310,.F.); +#148310 = EDGE_LOOP('',(#148311,#148322,#148330,#148338,#148346,#148354) + ); +#148311 = ORIENTED_EDGE('',*,*,#148312,.T.); +#148312 = EDGE_CURVE('',#148313,#148315,#148317,.T.); +#148313 = VERTEX_POINT('',#148314); +#148314 = CARTESIAN_POINT('',(95.860748,-110.784772,1.585)); +#148315 = VERTEX_POINT('',#148316); +#148316 = CARTESIAN_POINT('',(95.591599,-110.784772,1.585)); +#148317 = CIRCLE('',#148318,0.239283669194); +#148318 = AXIS2_PLACEMENT_3D('',#148319,#148320,#148321); +#148319 = CARTESIAN_POINT('',(95.7261735,-110.9826264371,1.585)); +#148320 = DIRECTION('',(0.,0.,1.)); +#148321 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#148322 = ORIENTED_EDGE('',*,*,#148323,.T.); +#148323 = EDGE_CURVE('',#148315,#148324,#148326,.T.); +#148324 = VERTEX_POINT('',#148325); +#148325 = CARTESIAN_POINT('',(95.563079,-110.841814,1.585)); +#148326 = LINE('',#148327,#148328); +#148327 = CARTESIAN_POINT('',(95.591599,-110.784772,1.585)); +#148328 = VECTOR('',#148329,1.); +#148329 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#148330 = ORIENTED_EDGE('',*,*,#148331,.T.); +#148331 = EDGE_CURVE('',#148324,#148332,#148334,.T.); +#148332 = VERTEX_POINT('',#148333); +#148333 = CARTESIAN_POINT('',(95.563079,-110.923099,1.585)); +#148334 = LINE('',#148335,#148336); +#148335 = CARTESIAN_POINT('',(95.563079,-110.841814,1.585)); +#148336 = VECTOR('',#148337,1.); +#148337 = DIRECTION('',(0.,-1.,0.)); +#148338 = ORIENTED_EDGE('',*,*,#148339,.T.); +#148339 = EDGE_CURVE('',#148332,#148340,#148342,.T.); +#148340 = VERTEX_POINT('',#148341); +#148341 = CARTESIAN_POINT('',(95.889269,-110.857862,1.585)); +#148342 = LINE('',#148343,#148344); +#148343 = CARTESIAN_POINT('',(95.563079,-110.923099,1.585)); +#148344 = VECTOR('',#148345,1.); +#148345 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#148346 = ORIENTED_EDGE('',*,*,#148347,.T.); +#148347 = EDGE_CURVE('',#148340,#148348,#148350,.T.); +#148348 = VERTEX_POINT('',#148349); +#148349 = CARTESIAN_POINT('',(95.889269,-110.841814,1.585)); +#148350 = LINE('',#148351,#148352); +#148351 = CARTESIAN_POINT('',(95.889269,-110.857862,1.585)); +#148352 = VECTOR('',#148353,1.); +#148353 = DIRECTION('',(0.,1.,0.)); +#148354 = ORIENTED_EDGE('',*,*,#148355,.T.); +#148355 = EDGE_CURVE('',#148348,#148313,#148356,.T.); +#148356 = LINE('',#148357,#148358); +#148357 = CARTESIAN_POINT('',(95.889269,-110.841814,1.585)); +#148358 = VECTOR('',#148359,1.); +#148359 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#148360 = PLANE('',#148361); +#148361 = AXIS2_PLACEMENT_3D('',#148362,#148363,#148364); +#148362 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148363 = DIRECTION('',(0.,0.,1.)); +#148364 = DIRECTION('',(1.,0.,-0.)); +#148365 = SHELL_BASED_SURFACE_MODEL('',(#148366)); +#148366 = OPEN_SHELL('',(#148367)); +#148367 = ADVANCED_FACE('',(#148368,#148470),#148538,.T.); +#148368 = FACE_BOUND('',#148369,.F.); +#148369 = EDGE_LOOP('',(#148370,#148381,#148389,#148398,#148406,#148414, + #148423,#148431,#148440,#148448,#148456,#148464)); +#148370 = ORIENTED_EDGE('',*,*,#148371,.T.); +#148371 = EDGE_CURVE('',#148372,#148374,#148376,.T.); +#148372 = VERTEX_POINT('',#148373); +#148373 = CARTESIAN_POINT('',(96.779744,-110.285559,1.585)); +#148374 = VERTEX_POINT('',#148375); +#148375 = CARTESIAN_POINT('',(96.896412,-110.347919,1.585)); +#148376 = CIRCLE('',#148377,7.500000000004E-02); +#148377 = AXIS2_PLACEMENT_3D('',#148378,#148379,#148380); +#148378 = CARTESIAN_POINT('',(96.821412,-110.3479190655,1.585)); +#148379 = DIRECTION('',(0.,0.,-1.)); +#148380 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#148381 = ORIENTED_EDGE('',*,*,#148382,.T.); +#148382 = EDGE_CURVE('',#148374,#148383,#148385,.T.); +#148383 = VERTEX_POINT('',#148384); +#148384 = CARTESIAN_POINT('',(96.894971,-111.362551,1.585)); +#148385 = LINE('',#148386,#148387); +#148386 = CARTESIAN_POINT('',(96.896412,-110.347919,1.585)); +#148387 = VECTOR('',#148388,1.); +#148388 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#148389 = ORIENTED_EDGE('',*,*,#148390,.T.); +#148390 = EDGE_CURVE('',#148383,#148391,#148393,.T.); +#148391 = VERTEX_POINT('',#148392); +#148392 = CARTESIAN_POINT('',(96.776215,-111.40675,1.585)); +#148393 = CIRCLE('',#148394,7.424656092701E-02); +#148394 = AXIS2_PLACEMENT_3D('',#148395,#148396,#148397); +#148395 = CARTESIAN_POINT('',(96.82209085331,-111.3483722825,1.585)); +#148396 = DIRECTION('',(-0.,0.,-1.)); +#148397 = DIRECTION('',(0.981596262232,-0.190968002485,-0.)); +#148398 = ORIENTED_EDGE('',*,*,#148399,.T.); +#148399 = EDGE_CURVE('',#148391,#148400,#148402,.T.); +#148400 = VERTEX_POINT('',#148401); +#148401 = CARTESIAN_POINT('',(96.740806,-111.421478,1.585)); +#148402 = LINE('',#148403,#148404); +#148403 = CARTESIAN_POINT('',(96.776215,-111.40675,1.585)); +#148404 = VECTOR('',#148405,1.); +#148405 = DIRECTION('',(-0.923315130307,-0.384043187866,0.)); +#148406 = ORIENTED_EDGE('',*,*,#148407,.T.); +#148407 = EDGE_CURVE('',#148400,#148408,#148410,.T.); +#148408 = VERTEX_POINT('',#148409); +#148409 = CARTESIAN_POINT('',(96.515888,-111.420256,1.585)); +#148410 = LINE('',#148411,#148412); +#148411 = CARTESIAN_POINT('',(96.740806,-111.421478,1.585)); +#148412 = VECTOR('',#148413,1.); +#148413 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#148414 = ORIENTED_EDGE('',*,*,#148415,.T.); +#148415 = EDGE_CURVE('',#148408,#148416,#148418,.T.); +#148416 = VERTEX_POINT('',#148417); +#148417 = CARTESIAN_POINT('',(96.271663,-111.172074,1.585)); +#148418 = CIRCLE('',#148419,0.348628446662); +#148419 = AXIS2_PLACEMENT_3D('',#148420,#148421,#148422); +#148420 = CARTESIAN_POINT('',(96.609063613227,-111.0843094284,1.585)); +#148421 = DIRECTION('',(0.,0.,-1.)); +#148422 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#148423 = ORIENTED_EDGE('',*,*,#148424,.T.); +#148424 = EDGE_CURVE('',#148416,#148425,#148427,.T.); +#148425 = VERTEX_POINT('',#148426); +#148426 = CARTESIAN_POINT('',(96.272885,-110.851919,1.585)); +#148427 = LINE('',#148428,#148429); +#148428 = CARTESIAN_POINT('',(96.271663,-111.172074,1.585)); +#148429 = VECTOR('',#148430,1.); +#148430 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#148431 = ORIENTED_EDGE('',*,*,#148432,.T.); +#148432 = EDGE_CURVE('',#148425,#148433,#148435,.T.); +#148433 = VERTEX_POINT('',#148434); +#148434 = CARTESIAN_POINT('',(96.521066,-110.607693,1.585)); +#148435 = CIRCLE('',#148436,0.3486213829); +#148436 = AXIS2_PLACEMENT_3D('',#148437,#148438,#148439); +#148437 = CARTESIAN_POINT('',(96.608826229516,-110.9450874438,1.585)); +#148438 = DIRECTION('',(0.,0.,-1.)); +#148439 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#148440 = ORIENTED_EDGE('',*,*,#148441,.T.); +#148441 = EDGE_CURVE('',#148433,#148442,#148444,.T.); +#148442 = VERTEX_POINT('',#148443); +#148443 = CARTESIAN_POINT('',(96.746412,-110.609079,1.585)); +#148444 = LINE('',#148445,#148446); +#148445 = CARTESIAN_POINT('',(96.521066,-110.607693,1.585)); +#148446 = VECTOR('',#148447,1.); +#148447 = DIRECTION('',(0.999981085954,-6.150425501802E-03,0.)); +#148448 = ORIENTED_EDGE('',*,*,#148449,.T.); +#148449 = EDGE_CURVE('',#148442,#148450,#148452,.T.); +#148450 = VERTEX_POINT('',#148451); +#148451 = CARTESIAN_POINT('',(96.747853,-110.333287,1.585)); +#148452 = LINE('',#148453,#148454); +#148453 = CARTESIAN_POINT('',(96.746412,-110.609079,1.585)); +#148454 = VECTOR('',#148455,1.); +#148455 = DIRECTION('',(5.22488081838E-03,0.999986350217,0.)); +#148456 = ORIENTED_EDGE('',*,*,#148457,.T.); +#148457 = EDGE_CURVE('',#148450,#148458,#148460,.T.); +#148458 = VERTEX_POINT('',#148459); +#148459 = CARTESIAN_POINT('',(96.759052,-110.306251,1.585)); +#148460 = LINE('',#148461,#148462); +#148461 = CARTESIAN_POINT('',(96.747853,-110.333287,1.585)); +#148462 = VECTOR('',#148463,1.); +#148463 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#148464 = ORIENTED_EDGE('',*,*,#148465,.T.); +#148465 = EDGE_CURVE('',#148458,#148372,#148466,.T.); +#148466 = LINE('',#148467,#148468); +#148467 = CARTESIAN_POINT('',(96.759052,-110.306251,1.585)); +#148468 = VECTOR('',#148469,1.); +#148469 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#148470 = FACE_BOUND('',#148471,.F.); +#148471 = EDGE_LOOP('',(#148472,#148482,#148490,#148499,#148507,#148516, + #148524,#148532)); +#148472 = ORIENTED_EDGE('',*,*,#148473,.T.); +#148473 = EDGE_CURVE('',#148474,#148476,#148478,.T.); +#148474 = VERTEX_POINT('',#148475); +#148475 = CARTESIAN_POINT('',(96.746412,-110.775223,1.585)); +#148476 = VERTEX_POINT('',#148477); +#148477 = CARTESIAN_POINT('',(96.708469,-110.756252,1.585)); +#148478 = LINE('',#148479,#148480); +#148479 = CARTESIAN_POINT('',(96.746412,-110.775223,1.585)); +#148480 = VECTOR('',#148481,1.); +#148481 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#148482 = ORIENTED_EDGE('',*,*,#148483,.T.); +#148483 = EDGE_CURVE('',#148476,#148484,#148486,.T.); +#148484 = VERTEX_POINT('',#148485); +#148485 = CARTESIAN_POINT('',(96.553403,-110.756252,1.585)); +#148486 = LINE('',#148487,#148488); +#148487 = CARTESIAN_POINT('',(96.708469,-110.756252,1.585)); +#148488 = VECTOR('',#148489,1.); +#148489 = DIRECTION('',(-1.,0.,0.)); +#148490 = ORIENTED_EDGE('',*,*,#148491,.T.); +#148491 = EDGE_CURVE('',#148484,#148492,#148494,.T.); +#148492 = VERTEX_POINT('',#148493); +#148493 = CARTESIAN_POINT('',(96.420222,-110.889433,1.585)); +#148494 = CIRCLE('',#148495,0.18686440374); +#148495 = AXIS2_PLACEMENT_3D('',#148496,#148497,#148498); +#148496 = CARTESIAN_POINT('',(96.600939,-110.936969,1.585)); +#148497 = DIRECTION('',(0.,0.,1.)); +#148498 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#148499 = ORIENTED_EDGE('',*,*,#148500,.T.); +#148500 = EDGE_CURVE('',#148492,#148501,#148503,.T.); +#148501 = VERTEX_POINT('',#148502); +#148502 = CARTESIAN_POINT('',(96.420222,-111.139737,1.585)); +#148503 = LINE('',#148504,#148505); +#148504 = CARTESIAN_POINT('',(96.420222,-110.889433,1.585)); +#148505 = VECTOR('',#148506,1.); +#148506 = DIRECTION('',(0.,-1.,0.)); +#148507 = ORIENTED_EDGE('',*,*,#148508,.T.); +#148508 = EDGE_CURVE('',#148501,#148509,#148511,.T.); +#148509 = VERTEX_POINT('',#148510); +#148510 = CARTESIAN_POINT('',(96.553403,-111.272919,1.585)); +#148511 = CIRCLE('',#148512,0.186867373533); +#148512 = AXIS2_PLACEMENT_3D('',#148513,#148514,#148515); +#148513 = CARTESIAN_POINT('',(96.600941713884,-111.092199643,1.585)); +#148514 = DIRECTION('',(0.,0.,1.)); +#148515 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#148516 = ORIENTED_EDGE('',*,*,#148517,.T.); +#148517 = EDGE_CURVE('',#148509,#148518,#148520,.T.); +#148518 = VERTEX_POINT('',#148519); +#148519 = CARTESIAN_POINT('',(96.708469,-111.272919,1.585)); +#148520 = LINE('',#148521,#148522); +#148521 = CARTESIAN_POINT('',(96.553403,-111.272919,1.585)); +#148522 = VECTOR('',#148523,1.); +#148523 = DIRECTION('',(1.,0.,0.)); +#148524 = ORIENTED_EDGE('',*,*,#148525,.T.); +#148525 = EDGE_CURVE('',#148518,#148526,#148528,.T.); +#148526 = VERTEX_POINT('',#148527); +#148527 = CARTESIAN_POINT('',(96.746412,-111.253947,1.585)); +#148528 = LINE('',#148529,#148530); +#148529 = CARTESIAN_POINT('',(96.708469,-111.272919,1.585)); +#148530 = VECTOR('',#148531,1.); +#148531 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#148532 = ORIENTED_EDGE('',*,*,#148533,.T.); +#148533 = EDGE_CURVE('',#148526,#148474,#148534,.T.); +#148534 = LINE('',#148535,#148536); +#148535 = CARTESIAN_POINT('',(96.746412,-111.253947,1.585)); +#148536 = VECTOR('',#148537,1.); +#148537 = DIRECTION('',(0.,1.,0.)); +#148538 = PLANE('',#148539); +#148539 = AXIS2_PLACEMENT_3D('',#148540,#148541,#148542); +#148540 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148541 = DIRECTION('',(0.,0.,1.)); +#148542 = DIRECTION('',(1.,0.,-0.)); +#148543 = SHELL_BASED_SURFACE_MODEL('',(#148544)); +#148544 = OPEN_SHELL('',(#148545)); +#148545 = ADVANCED_FACE('',(#148546,#148689),#148759,.T.); +#148546 = FACE_BOUND('',#148547,.F.); +#148547 = EDGE_LOOP('',(#148548,#148559,#148567,#148575,#148584,#148592, + #148600,#148608,#148616,#148624,#148632,#148640,#148649,#148657, + #148666,#148674,#148683)); +#148548 = ORIENTED_EDGE('',*,*,#148549,.T.); +#148549 = EDGE_CURVE('',#148550,#148552,#148554,.T.); +#148550 = VERTEX_POINT('',#148551); +#148551 = CARTESIAN_POINT('',(98.883175,-110.7583,1.585)); +#148552 = VERTEX_POINT('',#148553); +#148553 = CARTESIAN_POINT('',(99.112871,-110.328456,1.585)); +#148554 = CIRCLE('',#148555,0.610092147705); +#148555 = AXIS2_PLACEMENT_3D('',#148556,#148557,#148558); +#148556 = CARTESIAN_POINT('',(99.491321740242,-110.8069823481,1.585)); +#148557 = DIRECTION('',(0.,0.,-1.)); +#148558 = DIRECTION('',(-0.99681128913,7.97950741736E-02,0.)); +#148559 = ORIENTED_EDGE('',*,*,#148560,.T.); +#148560 = EDGE_CURVE('',#148552,#148561,#148563,.T.); +#148561 = VERTEX_POINT('',#148562); +#148562 = CARTESIAN_POINT('',(99.227018,-110.27436,1.585)); +#148563 = LINE('',#148564,#148565); +#148564 = CARTESIAN_POINT('',(99.112871,-110.328456,1.585)); +#148565 = VECTOR('',#148566,1.); +#148566 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#148567 = ORIENTED_EDGE('',*,*,#148568,.T.); +#148568 = EDGE_CURVE('',#148561,#148569,#148571,.T.); +#148569 = VERTEX_POINT('',#148570); +#148570 = CARTESIAN_POINT('',(99.446758,-110.27436,1.585)); +#148571 = LINE('',#148572,#148573); +#148572 = CARTESIAN_POINT('',(99.227018,-110.27436,1.585)); +#148573 = VECTOR('',#148574,1.); +#148574 = DIRECTION('',(1.,0.,0.)); +#148575 = ORIENTED_EDGE('',*,*,#148576,.T.); +#148576 = EDGE_CURVE('',#148569,#148577,#148579,.T.); +#148577 = VERTEX_POINT('',#148578); +#148578 = CARTESIAN_POINT('',(99.432126,-110.422919,1.585)); +#148579 = CIRCLE('',#148580,7.500006711464E-02); +#148580 = AXIS2_PLACEMENT_3D('',#148581,#148582,#148583); +#148581 = CARTESIAN_POINT('',(99.432126067115,-110.3479189328,1.585)); +#148582 = DIRECTION('',(0.,0.,-1.)); +#148583 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#148584 = ORIENTED_EDGE('',*,*,#148585,.T.); +#148585 = EDGE_CURVE('',#148577,#148586,#148588,.T.); +#148586 = VERTEX_POINT('',#148587); +#148587 = CARTESIAN_POINT('',(99.259355,-110.422919,1.585)); +#148588 = LINE('',#148589,#148590); +#148589 = CARTESIAN_POINT('',(99.432126,-110.422919,1.585)); +#148590 = VECTOR('',#148591,1.); +#148591 = DIRECTION('',(-1.,0.,0.)); +#148592 = ORIENTED_EDGE('',*,*,#148593,.T.); +#148593 = EDGE_CURVE('',#148586,#148594,#148596,.T.); +#148594 = VERTEX_POINT('',#148595); +#148595 = CARTESIAN_POINT('',(99.190839,-110.457177,1.585)); +#148596 = LINE('',#148597,#148598); +#148597 = CARTESIAN_POINT('',(99.259355,-110.422919,1.585)); +#148598 = VECTOR('',#148599,1.); +#148599 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#148600 = ORIENTED_EDGE('',*,*,#148601,.T.); +#148601 = EDGE_CURVE('',#148594,#148602,#148604,.T.); +#148602 = VERTEX_POINT('',#148603); +#148603 = CARTESIAN_POINT('',(99.157077,-110.490938,1.585)); +#148604 = LINE('',#148605,#148606); +#148605 = CARTESIAN_POINT('',(99.190839,-110.457177,1.585)); +#148606 = VECTOR('',#148607,1.); +#148607 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#148608 = ORIENTED_EDGE('',*,*,#148609,.T.); +#148609 = EDGE_CURVE('',#148602,#148610,#148612,.T.); +#148610 = VERTEX_POINT('',#148611); +#148611 = CARTESIAN_POINT('',(99.073165,-110.616807,1.585)); +#148612 = LINE('',#148613,#148614); +#148613 = CARTESIAN_POINT('',(99.157077,-110.490938,1.585)); +#148614 = VECTOR('',#148615,1.); +#148615 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#148616 = ORIENTED_EDGE('',*,*,#148617,.T.); +#148617 = EDGE_CURVE('',#148610,#148618,#148620,.T.); +#148618 = VERTEX_POINT('',#148619); +#148619 = CARTESIAN_POINT('',(99.054641,-110.690904,1.585)); +#148620 = LINE('',#148621,#148622); +#148621 = CARTESIAN_POINT('',(99.073165,-110.616807,1.585)); +#148622 = VECTOR('',#148623,1.); +#148623 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#148624 = ORIENTED_EDGE('',*,*,#148625,.T.); +#148625 = EDGE_CURVE('',#148618,#148626,#148628,.T.); +#148626 = VERTEX_POINT('',#148627); +#148627 = CARTESIAN_POINT('',(99.13178,-110.655312,1.585)); +#148628 = LINE('',#148629,#148630); +#148629 = CARTESIAN_POINT('',(99.054641,-110.690904,1.585)); +#148630 = VECTOR('',#148631,1.); +#148631 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#148632 = ORIENTED_EDGE('',*,*,#148633,.T.); +#148633 = EDGE_CURVE('',#148626,#148634,#148636,.T.); +#148634 = VERTEX_POINT('',#148635); +#148635 = CARTESIAN_POINT('',(99.356697,-110.656534,1.585)); +#148636 = LINE('',#148637,#148638); +#148637 = CARTESIAN_POINT('',(99.13178,-110.655312,1.585)); +#148638 = VECTOR('',#148639,1.); +#148639 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#148640 = ORIENTED_EDGE('',*,*,#148641,.T.); +#148641 = EDGE_CURVE('',#148634,#148642,#148644,.T.); +#148642 = VERTEX_POINT('',#148643); +#148643 = CARTESIAN_POINT('',(99.600923,-110.904715,1.585)); +#148644 = CIRCLE('',#148645,0.348625649748); +#148645 = AXIS2_PLACEMENT_3D('',#148646,#148647,#148648); +#148646 = CARTESIAN_POINT('',(99.263525045865,-110.9924786838,1.585)); +#148647 = DIRECTION('',(0.,0.,-1.)); +#148648 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#148649 = ORIENTED_EDGE('',*,*,#148650,.T.); +#148650 = EDGE_CURVE('',#148642,#148651,#148653,.T.); +#148651 = VERTEX_POINT('',#148652); +#148652 = CARTESIAN_POINT('',(99.599701,-111.177252,1.585)); +#148653 = LINE('',#148654,#148655); +#148654 = CARTESIAN_POINT('',(99.600923,-110.904715,1.585)); +#148655 = VECTOR('',#148656,1.); +#148656 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#148657 = ORIENTED_EDGE('',*,*,#148658,.T.); +#148658 = EDGE_CURVE('',#148651,#148659,#148661,.T.); +#148659 = VERTEX_POINT('',#148660); +#148660 = CARTESIAN_POINT('',(99.35152,-111.421478,1.585)); +#148661 = CIRCLE('',#148662,0.348635327447); +#148662 = AXIS2_PLACEMENT_3D('',#148663,#148664,#148665); +#148663 = CARTESIAN_POINT('',(99.263748481291,-111.0840720841,1.585)); +#148664 = DIRECTION('',(0.,0.,-1.)); +#148665 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#148666 = ORIENTED_EDGE('',*,*,#148667,.T.); +#148667 = EDGE_CURVE('',#148659,#148668,#148670,.T.); +#148668 = VERTEX_POINT('',#148669); +#148669 = CARTESIAN_POINT('',(99.126602,-111.420256,1.585)); +#148670 = LINE('',#148671,#148672); +#148671 = CARTESIAN_POINT('',(99.35152,-111.421478,1.585)); +#148672 = VECTOR('',#148673,1.); +#148673 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#148674 = ORIENTED_EDGE('',*,*,#148675,.T.); +#148675 = EDGE_CURVE('',#148668,#148676,#148678,.T.); +#148676 = VERTEX_POINT('',#148677); +#148677 = CARTESIAN_POINT('',(98.882377,-111.172074,1.585)); +#148678 = CIRCLE('',#148679,0.348628446662); +#148679 = AXIS2_PLACEMENT_3D('',#148680,#148681,#148682); +#148680 = CARTESIAN_POINT('',(99.219777613227,-111.0843094284,1.585)); +#148681 = DIRECTION('',(0.,0.,-1.)); +#148682 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#148683 = ORIENTED_EDGE('',*,*,#148684,.T.); +#148684 = EDGE_CURVE('',#148676,#148550,#148685,.T.); +#148685 = LINE('',#148686,#148687); +#148686 = CARTESIAN_POINT('',(98.882377,-111.172074,1.585)); +#148687 = VECTOR('',#148688,1.); +#148688 = DIRECTION('',(1.92858544986E-03,0.999998140277,0.)); +#148689 = FACE_BOUND('',#148690,.F.); +#148690 = EDGE_LOOP('',(#148691,#148702,#148710,#148719,#148727,#148736, + #148744,#148753)); +#148691 = ORIENTED_EDGE('',*,*,#148692,.T.); +#148692 = EDGE_CURVE('',#148693,#148695,#148697,.T.); +#148693 = VERTEX_POINT('',#148694); +#148694 = CARTESIAN_POINT('',(99.387699,-110.838129,1.585)); +#148695 = VERTEX_POINT('',#148696); +#148696 = CARTESIAN_POINT('',(99.095601,-110.838129,1.585)); +#148697 = CIRCLE('',#148698,0.252889603602); +#148698 = AXIS2_PLACEMENT_3D('',#148699,#148700,#148701); +#148699 = CARTESIAN_POINT('',(99.24165,-111.044582,1.585)); +#148700 = DIRECTION('',(0.,0.,1.)); +#148701 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#148702 = ORIENTED_EDGE('',*,*,#148703,.T.); +#148703 = EDGE_CURVE('',#148695,#148704,#148706,.T.); +#148704 = VERTEX_POINT('',#148705); +#148705 = CARTESIAN_POINT('',(99.065194,-110.868536,1.585)); +#148706 = LINE('',#148707,#148708); +#148707 = CARTESIAN_POINT('',(99.095601,-110.838129,1.585)); +#148708 = VECTOR('',#148709,1.); +#148709 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#148710 = ORIENTED_EDGE('',*,*,#148711,.T.); +#148711 = EDGE_CURVE('',#148704,#148712,#148714,.T.); +#148712 = VERTEX_POINT('',#148713); +#148713 = CARTESIAN_POINT('',(99.065194,-111.208253,1.585)); +#148714 = CIRCLE('',#148715,0.305621483548); +#148715 = AXIS2_PLACEMENT_3D('',#148716,#148717,#148718); +#148716 = CARTESIAN_POINT('',(99.319266,-111.0383945,1.585)); +#148717 = DIRECTION('',(0.,0.,1.)); +#148718 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#148719 = ORIENTED_EDGE('',*,*,#148720,.T.); +#148720 = EDGE_CURVE('',#148712,#148721,#148723,.T.); +#148721 = VERTEX_POINT('',#148722); +#148722 = CARTESIAN_POINT('',(99.095601,-111.238661,1.585)); +#148723 = LINE('',#148724,#148725); +#148724 = CARTESIAN_POINT('',(99.065194,-111.208253,1.585)); +#148725 = VECTOR('',#148726,1.); +#148726 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#148727 = ORIENTED_EDGE('',*,*,#148728,.T.); +#148728 = EDGE_CURVE('',#148721,#148729,#148731,.T.); +#148729 = VERTEX_POINT('',#148730); +#148730 = CARTESIAN_POINT('',(99.387698,-111.238661,1.585)); +#148731 = CIRCLE('',#148732,0.252888498466); +#148732 = AXIS2_PLACEMENT_3D('',#148733,#148734,#148735); +#148733 = CARTESIAN_POINT('',(99.2416495,-111.032209,1.585)); +#148734 = DIRECTION('',(0.,0.,1.)); +#148735 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#148736 = ORIENTED_EDGE('',*,*,#148737,.T.); +#148737 = EDGE_CURVE('',#148729,#148738,#148740,.T.); +#148738 = VERTEX_POINT('',#148739); +#148739 = CARTESIAN_POINT('',(99.418105,-111.208253,1.585)); +#148740 = LINE('',#148741,#148742); +#148741 = CARTESIAN_POINT('',(99.387698,-111.238661,1.585)); +#148742 = VECTOR('',#148743,1.); +#148743 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#148744 = ORIENTED_EDGE('',*,*,#148745,.T.); +#148745 = EDGE_CURVE('',#148738,#148746,#148748,.T.); +#148746 = VERTEX_POINT('',#148747); +#148747 = CARTESIAN_POINT('',(99.418106,-110.868536,1.585)); +#148748 = CIRCLE('',#148749,0.305616146029); +#148749 = AXIS2_PLACEMENT_3D('',#148750,#148751,#148752); +#148750 = CARTESIAN_POINT('',(99.164039920493,-111.0383937521,1.585)); +#148751 = DIRECTION('',(0.,-0.,1.)); +#148752 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#148753 = ORIENTED_EDGE('',*,*,#148754,.T.); +#148754 = EDGE_CURVE('',#148746,#148693,#148755,.T.); +#148755 = LINE('',#148756,#148757); +#148756 = CARTESIAN_POINT('',(99.418106,-110.868536,1.585)); +#148757 = VECTOR('',#148758,1.); +#148758 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#148759 = PLANE('',#148760); +#148760 = AXIS2_PLACEMENT_3D('',#148761,#148762,#148763); +#148761 = CARTESIAN_POINT('',(0.,0.,1.585)); +#148762 = DIRECTION('',(0.,0.,1.)); +#148763 = DIRECTION('',(1.,0.,-0.)); +#148764 = SHELL_BASED_SURFACE_MODEL('',(#148765)); +#148765 = OPEN_SHELL('',(#148766)); +#148766 = ADVANCED_FACE('',(#148767,#148917,#148987),#149072,.T.); +#148767 = FACE_BOUND('',#148768,.F.); +#148768 = EDGE_LOOP('',(#148769,#148780,#148788,#148796,#148804,#148812, + #148820,#148828,#148837,#148845,#148854,#148862,#148871,#148879, + #148887,#148895,#148903,#148911)); +#148769 = ORIENTED_EDGE('',*,*,#148770,.T.); +#148770 = EDGE_CURVE('',#148771,#148773,#148775,.T.); +#148771 = VERTEX_POINT('',#148772); +#148772 = CARTESIAN_POINT('',(107.186333,-110.33242,1.585)); +#148773 = VERTEX_POINT('',#148774); +#148774 = CARTESIAN_POINT('',(107.654409,-110.337786,1.585)); +#148775 = CIRCLE('',#148776,0.397581403297); +#148776 = AXIS2_PLACEMENT_3D('',#148777,#148778,#148779); +#148777 = CARTESIAN_POINT('',(107.41668687062,-110.6564694816,1.585)); +#148778 = DIRECTION('',(0.,0.,-1.)); +#148779 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#148780 = ORIENTED_EDGE('',*,*,#148781,.T.); +#148781 = EDGE_CURVE('',#148773,#148782,#148784,.T.); +#148782 = VERTEX_POINT('',#148783); +#148783 = CARTESIAN_POINT('',(107.717862,-110.403316,1.585)); +#148784 = LINE('',#148785,#148786); +#148785 = CARTESIAN_POINT('',(107.654409,-110.337786,1.585)); +#148786 = VECTOR('',#148787,1.); +#148787 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#148788 = ORIENTED_EDGE('',*,*,#148789,.T.); +#148789 = EDGE_CURVE('',#148782,#148790,#148792,.T.); +#148790 = VERTEX_POINT('',#148791); +#148791 = CARTESIAN_POINT('',(107.775923,-110.523763,1.585)); +#148792 = LINE('',#148793,#148794); +#148793 = CARTESIAN_POINT('',(107.717862,-110.403316,1.585)); +#148794 = VECTOR('',#148795,1.); +#148795 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#148796 = ORIENTED_EDGE('',*,*,#148797,.T.); +#148797 = EDGE_CURVE('',#148790,#148798,#148800,.T.); +#148798 = VERTEX_POINT('',#148799); +#148799 = CARTESIAN_POINT('',(107.774701,-110.605824,1.585)); +#148800 = LINE('',#148801,#148802); +#148801 = CARTESIAN_POINT('',(107.775923,-110.523763,1.585)); +#148802 = VECTOR('',#148803,1.); +#148803 = DIRECTION('',(-1.488971047975E-02,-0.999889142116,0.)); +#148804 = ORIENTED_EDGE('',*,*,#148805,.T.); +#148805 = EDGE_CURVE('',#148798,#148806,#148808,.T.); +#148806 = VERTEX_POINT('',#148807); +#148807 = CARTESIAN_POINT('',(107.712496,-110.728535,1.585)); +#148808 = LINE('',#148809,#148810); +#148809 = CARTESIAN_POINT('',(107.774701,-110.605824,1.585)); +#148810 = VECTOR('',#148811,1.); +#148811 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#148812 = ORIENTED_EDGE('',*,*,#148813,.T.); +#148813 = EDGE_CURVE('',#148806,#148814,#148816,.T.); +#148814 = VERTEX_POINT('',#148815); +#148815 = CARTESIAN_POINT('',(107.665573,-110.77649,1.585)); +#148816 = LINE('',#148817,#148818); +#148817 = CARTESIAN_POINT('',(107.712496,-110.728535,1.585)); +#148818 = VECTOR('',#148819,1.); +#148819 = DIRECTION('',(-0.699374120429,-0.714755790235,0.)); +#148820 = ORIENTED_EDGE('',*,*,#148821,.T.); +#148821 = EDGE_CURVE('',#148814,#148822,#148824,.T.); +#148822 = VERTEX_POINT('',#148823); +#148823 = CARTESIAN_POINT('',(107.721827,-110.838187,1.585)); +#148824 = LINE('',#148825,#148826); +#148825 = CARTESIAN_POINT('',(107.665573,-110.77649,1.585)); +#148826 = VECTOR('',#148827,1.); +#148827 = DIRECTION('',(0.673759436039,-0.738950757729,0.)); +#148828 = ORIENTED_EDGE('',*,*,#148829,.T.); +#148829 = EDGE_CURVE('',#148822,#148830,#148832,.T.); +#148830 = VERTEX_POINT('',#148831); +#148831 = CARTESIAN_POINT('',(107.712496,-111.299963,1.585)); +#148832 = CIRCLE('',#148833,0.395774657874); +#148833 = AXIS2_PLACEMENT_3D('',#148834,#148835,#148836); +#148834 = CARTESIAN_POINT('',(107.39581374421,-111.0625816007,1.585)); +#148835 = DIRECTION('',(0.,0.,-1.)); +#148836 = DIRECTION('',(0.823734540094,0.566975667428,0.)); +#148837 = ORIENTED_EDGE('',*,*,#148838,.T.); +#148838 = EDGE_CURVE('',#148830,#148839,#148841,.T.); +#148839 = VERTEX_POINT('',#148840); +#148840 = CARTESIAN_POINT('',(107.646966,-111.363417,1.585)); +#148841 = LINE('',#148842,#148843); +#148842 = CARTESIAN_POINT('',(107.712496,-111.299963,1.585)); +#148843 = VECTOR('',#148844,1.); +#148844 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#148845 = ORIENTED_EDGE('',*,*,#148846,.T.); +#148846 = EDGE_CURVE('',#148839,#148847,#148849,.T.); +#148847 = VERTEX_POINT('',#148848); +#148848 = CARTESIAN_POINT('',(107.178889,-111.35805,1.585)); +#148849 = CIRCLE('',#148850,0.397464151365); +#148850 = AXIS2_PLACEMENT_3D('',#148851,#148852,#148853); +#148851 = CARTESIAN_POINT('',(107.41661064058,-111.0395124461,1.585)); +#148852 = DIRECTION('',(-0.,0.,-1.)); +#148853 = DIRECTION('',(0.579562606145,-0.814927717996,-0.)); +#148854 = ORIENTED_EDGE('',*,*,#148855,.T.); +#148855 = EDGE_CURVE('',#148847,#148856,#148858,.T.); +#148856 = VERTEX_POINT('',#148857); +#148857 = CARTESIAN_POINT('',(107.115436,-111.292517,1.585)); +#148858 = LINE('',#148859,#148860); +#148859 = CARTESIAN_POINT('',(107.178889,-111.35805,1.585)); +#148860 = VECTOR('',#148861,1.); +#148861 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#148862 = ORIENTED_EDGE('',*,*,#148863,.T.); +#148863 = EDGE_CURVE('',#148856,#148864,#148866,.T.); +#148864 = VERTEX_POINT('',#148865); +#148865 = CARTESIAN_POINT('',(107.120803,-110.824444,1.585)); +#148866 = CIRCLE('',#148867,0.397465551155); +#148867 = AXIS2_PLACEMENT_3D('',#148868,#148869,#148870); +#148868 = CARTESIAN_POINT('',(107.43934374227,-111.0621637086,1.585)); +#148869 = DIRECTION('',(0.,0.,-1.)); +#148870 = DIRECTION('',(-0.814932869863,-0.579555361995,-0.)); +#148871 = ORIENTED_EDGE('',*,*,#148872,.T.); +#148872 = EDGE_CURVE('',#148864,#148873,#148875,.T.); +#148873 = VERTEX_POINT('',#148874); +#148874 = CARTESIAN_POINT('',(107.167727,-110.77649,1.585)); +#148875 = LINE('',#148876,#148877); +#148876 = CARTESIAN_POINT('',(107.120803,-110.824444,1.585)); +#148877 = VECTOR('',#148878,1.); +#148878 = DIRECTION('',(0.699389185334,0.714741049218,0.)); +#148879 = ORIENTED_EDGE('',*,*,#148880,.T.); +#148880 = EDGE_CURVE('',#148873,#148881,#148883,.T.); +#148881 = VERTEX_POINT('',#148882); +#148882 = CARTESIAN_POINT('',(107.111473,-110.714793,1.585)); +#148883 = LINE('',#148884,#148885); +#148884 = CARTESIAN_POINT('',(107.167727,-110.77649,1.585)); +#148885 = VECTOR('',#148886,1.); +#148886 = DIRECTION('',(-0.673759436039,0.738950757729,0.)); +#148887 = ORIENTED_EDGE('',*,*,#148888,.T.); +#148888 = EDGE_CURVE('',#148881,#148889,#148891,.T.); +#148889 = VERTEX_POINT('',#148890); +#148890 = CARTESIAN_POINT('',(107.057377,-110.600646,1.585)); +#148891 = LINE('',#148892,#148893); +#148892 = CARTESIAN_POINT('',(107.111473,-110.714793,1.585)); +#148893 = VECTOR('',#148894,1.); +#148894 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#148895 = ORIENTED_EDGE('',*,*,#148896,.T.); +#148896 = EDGE_CURVE('',#148889,#148897,#148899,.T.); +#148897 = VERTEX_POINT('',#148898); +#148898 = CARTESIAN_POINT('',(107.058599,-110.518586,1.585)); +#148899 = LINE('',#148900,#148901); +#148900 = CARTESIAN_POINT('',(107.057377,-110.600646,1.585)); +#148901 = VECTOR('',#148902,1.); +#148902 = DIRECTION('',(1.488989188842E-02,0.999889139415,0.)); +#148903 = ORIENTED_EDGE('',*,*,#148904,.T.); +#148904 = EDGE_CURVE('',#148897,#148905,#148907,.T.); +#148905 = VERTEX_POINT('',#148906); +#148906 = CARTESIAN_POINT('',(107.120803,-110.395873,1.585)); +#148907 = LINE('',#148908,#148909); +#148908 = CARTESIAN_POINT('',(107.058599,-110.518586,1.585)); +#148909 = VECTOR('',#148910,1.); +#148910 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#148911 = ORIENTED_EDGE('',*,*,#148912,.T.); +#148912 = EDGE_CURVE('',#148905,#148771,#148913,.T.); +#148913 = LINE('',#148914,#148915); +#148914 = CARTESIAN_POINT('',(107.120803,-110.395873,1.585)); +#148915 = VECTOR('',#148916,1.); +#148916 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#148917 = FACE_BOUND('',#148918,.F.); +#148918 = EDGE_LOOP('',(#148919,#148930,#148938,#148947,#148955,#148964, + #148972,#148981)); +#148919 = ORIENTED_EDGE('',*,*,#148920,.T.); +#148920 = EDGE_CURVE('',#148921,#148923,#148925,.T.); +#148921 = VERTEX_POINT('',#148922); +#148922 = CARTESIAN_POINT('',(107.562699,-110.885748,1.585)); +#148923 = VERTEX_POINT('',#148924); +#148924 = CARTESIAN_POINT('',(107.270601,-110.885748,1.585)); +#148925 = CIRCLE('',#148926,0.252889603602); +#148926 = AXIS2_PLACEMENT_3D('',#148927,#148928,#148929); +#148927 = CARTESIAN_POINT('',(107.41665,-111.092201,1.585)); +#148928 = DIRECTION('',(0.,0.,1.)); +#148929 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#148930 = ORIENTED_EDGE('',*,*,#148931,.T.); +#148931 = EDGE_CURVE('',#148923,#148932,#148934,.T.); +#148932 = VERTEX_POINT('',#148933); +#148933 = CARTESIAN_POINT('',(107.240194,-110.916155,1.585)); +#148934 = LINE('',#148935,#148936); +#148935 = CARTESIAN_POINT('',(107.270601,-110.885748,1.585)); +#148936 = VECTOR('',#148937,1.); +#148937 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#148938 = ORIENTED_EDGE('',*,*,#148939,.T.); +#148939 = EDGE_CURVE('',#148932,#148940,#148942,.T.); +#148940 = VERTEX_POINT('',#148941); +#148941 = CARTESIAN_POINT('',(107.240194,-111.208253,1.585)); +#148942 = CIRCLE('',#148943,0.252889603602); +#148943 = AXIS2_PLACEMENT_3D('',#148944,#148945,#148946); +#148944 = CARTESIAN_POINT('',(107.446647,-111.062204,1.585)); +#148945 = DIRECTION('',(0.,0.,1.)); +#148946 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#148947 = ORIENTED_EDGE('',*,*,#148948,.T.); +#148948 = EDGE_CURVE('',#148940,#148949,#148951,.T.); +#148949 = VERTEX_POINT('',#148950); +#148950 = CARTESIAN_POINT('',(107.270601,-111.238661,1.585)); +#148951 = LINE('',#148952,#148953); +#148952 = CARTESIAN_POINT('',(107.240194,-111.208253,1.585)); +#148953 = VECTOR('',#148954,1.); +#148954 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#148955 = ORIENTED_EDGE('',*,*,#148956,.T.); +#148956 = EDGE_CURVE('',#148949,#148957,#148959,.T.); +#148957 = VERTEX_POINT('',#148958); +#148958 = CARTESIAN_POINT('',(107.562698,-111.238661,1.585)); +#148959 = CIRCLE('',#148960,0.252888498466); +#148960 = AXIS2_PLACEMENT_3D('',#148961,#148962,#148963); +#148961 = CARTESIAN_POINT('',(107.4166495,-111.032209,1.585)); +#148962 = DIRECTION('',(0.,0.,1.)); +#148963 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#148964 = ORIENTED_EDGE('',*,*,#148965,.T.); +#148965 = EDGE_CURVE('',#148957,#148966,#148968,.T.); +#148966 = VERTEX_POINT('',#148967); +#148967 = CARTESIAN_POINT('',(107.593105,-111.208253,1.585)); +#148968 = LINE('',#148969,#148970); +#148969 = CARTESIAN_POINT('',(107.562698,-111.238661,1.585)); +#148970 = VECTOR('',#148971,1.); +#148971 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#148972 = ORIENTED_EDGE('',*,*,#148973,.T.); +#148973 = EDGE_CURVE('',#148966,#148974,#148976,.T.); +#148974 = VERTEX_POINT('',#148975); +#148975 = CARTESIAN_POINT('',(107.593106,-110.916155,1.585)); +#148976 = CIRCLE('',#148977,0.252885429722); +#148977 = AXIS2_PLACEMENT_3D('',#148978,#148979,#148980); +#148978 = CARTESIAN_POINT('',(107.38665761271,-111.0622032932,1.585)); +#148979 = DIRECTION('',(0.,-0.,1.)); +#148980 = DIRECTION('',(0.816367267623,-0.577533102387,-0.)); +#148981 = ORIENTED_EDGE('',*,*,#148982,.T.); +#148982 = EDGE_CURVE('',#148974,#148921,#148983,.T.); +#148983 = LINE('',#148984,#148985); +#148984 = CARTESIAN_POINT('',(107.593106,-110.916155,1.585)); +#148985 = VECTOR('',#148986,1.); +#148986 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#148987 = FACE_BOUND('',#148988,.F.); +#148988 = EDGE_LOOP('',(#148989,#149000,#149008,#149016,#149024,#149033, + #149041,#149050,#149058,#149066)); +#148989 = ORIENTED_EDGE('',*,*,#148990,.T.); +#148990 = EDGE_CURVE('',#148991,#148993,#148995,.T.); +#148991 = VERTEX_POINT('',#148992); +#148992 = CARTESIAN_POINT('',(107.562699,-110.457177,1.585)); +#148993 = VERTEX_POINT('',#148994); +#148994 = CARTESIAN_POINT('',(107.270601,-110.457177,1.585)); +#148995 = CIRCLE('',#148996,0.252889603602); +#148996 = AXIS2_PLACEMENT_3D('',#148997,#148998,#148999); +#148997 = CARTESIAN_POINT('',(107.41665,-110.66363,1.585)); +#148998 = DIRECTION('',(0.,0.,1.)); +#148999 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#149000 = ORIENTED_EDGE('',*,*,#149001,.T.); +#149001 = EDGE_CURVE('',#148993,#149002,#149004,.T.); +#149002 = VERTEX_POINT('',#149003); +#149003 = CARTESIAN_POINT('',(107.240194,-110.487584,1.585)); +#149004 = LINE('',#149005,#149006); +#149005 = CARTESIAN_POINT('',(107.270601,-110.457177,1.585)); +#149006 = VECTOR('',#149007,1.); +#149007 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#149008 = ORIENTED_EDGE('',*,*,#149009,.T.); +#149009 = EDGE_CURVE('',#149002,#149010,#149012,.T.); +#149010 = VERTEX_POINT('',#149011); +#149011 = CARTESIAN_POINT('',(107.205936,-110.5561,1.585)); +#149012 = LINE('',#149013,#149014); +#149013 = CARTESIAN_POINT('',(107.240194,-110.487584,1.585)); +#149014 = VECTOR('',#149015,1.); +#149015 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#149016 = ORIENTED_EDGE('',*,*,#149017,.T.); +#149017 = EDGE_CURVE('',#149010,#149018,#149020,.T.); +#149018 = VERTEX_POINT('',#149019); +#149019 = CARTESIAN_POINT('',(107.205936,-110.568309,1.585)); +#149020 = LINE('',#149021,#149022); +#149021 = CARTESIAN_POINT('',(107.205936,-110.5561,1.585)); +#149022 = VECTOR('',#149023,1.); +#149023 = DIRECTION('',(0.,-1.,0.)); +#149024 = ORIENTED_EDGE('',*,*,#149025,.T.); +#149025 = EDGE_CURVE('',#149018,#149026,#149028,.T.); +#149026 = VERTEX_POINT('',#149027); +#149027 = CARTESIAN_POINT('',(107.339117,-110.70149,1.585)); +#149028 = CIRCLE('',#149029,0.18686440374); +#149029 = AXIS2_PLACEMENT_3D('',#149030,#149031,#149032); +#149030 = CARTESIAN_POINT('',(107.386653,-110.520773,1.585)); +#149031 = DIRECTION('',(0.,0.,1.)); +#149032 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#149033 = ORIENTED_EDGE('',*,*,#149034,.T.); +#149034 = EDGE_CURVE('',#149026,#149035,#149037,.T.); +#149035 = VERTEX_POINT('',#149036); +#149036 = CARTESIAN_POINT('',(107.494183,-110.70149,1.585)); +#149037 = LINE('',#149038,#149039); +#149038 = CARTESIAN_POINT('',(107.339117,-110.70149,1.585)); +#149039 = VECTOR('',#149040,1.); +#149040 = DIRECTION('',(1.,0.,0.)); +#149041 = ORIENTED_EDGE('',*,*,#149042,.T.); +#149042 = EDGE_CURVE('',#149035,#149043,#149045,.T.); +#149043 = VERTEX_POINT('',#149044); +#149044 = CARTESIAN_POINT('',(107.627364,-110.568309,1.585)); +#149045 = CIRCLE('',#149046,0.18686440374); +#149046 = AXIS2_PLACEMENT_3D('',#149047,#149048,#149049); +#149047 = CARTESIAN_POINT('',(107.446647,-110.520773,1.585)); +#149048 = DIRECTION('',(0.,0.,1.)); +#149049 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#149050 = ORIENTED_EDGE('',*,*,#149051,.T.); +#149051 = EDGE_CURVE('',#149043,#149052,#149054,.T.); +#149052 = VERTEX_POINT('',#149053); +#149053 = CARTESIAN_POINT('',(107.627364,-110.5561,1.585)); +#149054 = LINE('',#149055,#149056); +#149055 = CARTESIAN_POINT('',(107.627364,-110.568309,1.585)); +#149056 = VECTOR('',#149057,1.); +#149057 = DIRECTION('',(0.,1.,0.)); +#149058 = ORIENTED_EDGE('',*,*,#149059,.T.); +#149059 = EDGE_CURVE('',#149052,#149060,#149062,.T.); +#149060 = VERTEX_POINT('',#149061); +#149061 = CARTESIAN_POINT('',(107.593106,-110.487584,1.585)); +#149062 = LINE('',#149063,#149064); +#149063 = CARTESIAN_POINT('',(107.627364,-110.5561,1.585)); +#149064 = VECTOR('',#149065,1.); +#149065 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#149066 = ORIENTED_EDGE('',*,*,#149067,.T.); +#149067 = EDGE_CURVE('',#149060,#148991,#149068,.T.); +#149068 = LINE('',#149069,#149070); +#149069 = CARTESIAN_POINT('',(107.593106,-110.487584,1.585)); +#149070 = VECTOR('',#149071,1.); +#149071 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#149072 = PLANE('',#149073); +#149073 = AXIS2_PLACEMENT_3D('',#149074,#149075,#149076); +#149074 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149075 = DIRECTION('',(0.,0.,1.)); +#149076 = DIRECTION('',(1.,0.,-0.)); +#149077 = SHELL_BASED_SURFACE_MODEL('',(#149078)); +#149078 = OPEN_SHELL('',(#149079)); +#149079 = ADVANCED_FACE('',(#149080,#149207),#149275,.T.); +#149080 = FACE_BOUND('',#149081,.F.); +#149081 = EDGE_LOOP('',(#149082,#149093,#149101,#149110,#149118,#149126, + #149135,#149143,#149151,#149160,#149168,#149177,#149185,#149193, + #149201)); +#149082 = ORIENTED_EDGE('',*,*,#149083,.T.); +#149083 = EDGE_CURVE('',#149084,#149086,#149088,.T.); +#149084 = VERTEX_POINT('',#149085); +#149085 = CARTESIAN_POINT('',(110.851172,-110.285559,1.585)); +#149086 = VERTEX_POINT('',#149087); +#149087 = CARTESIAN_POINT('',(110.96784,-110.347919,1.585)); +#149088 = CIRCLE('',#149089,7.500000000002E-02); +#149089 = AXIS2_PLACEMENT_3D('',#149090,#149091,#149092); +#149090 = CARTESIAN_POINT('',(110.89284,-110.3479190655,1.585)); +#149091 = DIRECTION('',(0.,0.,-1.)); +#149092 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#149093 = ORIENTED_EDGE('',*,*,#149094,.T.); +#149094 = EDGE_CURVE('',#149086,#149095,#149097,.T.); +#149095 = VERTEX_POINT('',#149096); +#149096 = CARTESIAN_POINT('',(110.966399,-111.362551,1.585)); +#149097 = LINE('',#149098,#149099); +#149098 = CARTESIAN_POINT('',(110.96784,-110.347919,1.585)); +#149099 = VECTOR('',#149100,1.); +#149100 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#149101 = ORIENTED_EDGE('',*,*,#149102,.T.); +#149102 = EDGE_CURVE('',#149095,#149103,#149105,.T.); +#149103 = VERTEX_POINT('',#149104); +#149104 = CARTESIAN_POINT('',(110.847643,-111.40675,1.585)); +#149105 = CIRCLE('',#149106,7.4246560927E-02); +#149106 = AXIS2_PLACEMENT_3D('',#149107,#149108,#149109); +#149107 = CARTESIAN_POINT('',(110.89351885331,-111.3483722825,1.585)); +#149108 = DIRECTION('',(-0.,0.,-1.)); +#149109 = DIRECTION('',(0.981596262232,-0.190968002485,-0.)); +#149110 = ORIENTED_EDGE('',*,*,#149111,.T.); +#149111 = EDGE_CURVE('',#149103,#149112,#149114,.T.); +#149112 = VERTEX_POINT('',#149113); +#149113 = CARTESIAN_POINT('',(110.84491,-111.407886,1.585)); +#149114 = LINE('',#149115,#149116); +#149115 = CARTESIAN_POINT('',(110.847643,-111.40675,1.585)); +#149116 = VECTOR('',#149117,1.); +#149117 = DIRECTION('',(-0.92340645941,-0.383823541123,0.)); +#149118 = ORIENTED_EDGE('',*,*,#149119,.T.); +#149119 = EDGE_CURVE('',#149112,#149120,#149122,.T.); +#149120 = VERTEX_POINT('',#149121); +#149121 = CARTESIAN_POINT('',(110.806514,-111.391982,1.585)); +#149122 = LINE('',#149123,#149124); +#149123 = CARTESIAN_POINT('',(110.84491,-111.407886,1.585)); +#149124 = VECTOR('',#149125,1.); +#149125 = DIRECTION('',(-0.923880757036,0.382680476089,0.)); +#149126 = ORIENTED_EDGE('',*,*,#149127,.T.); +#149127 = EDGE_CURVE('',#149120,#149128,#149130,.T.); +#149128 = VERTEX_POINT('',#149129); +#149129 = CARTESIAN_POINT('',(110.693914,-111.41438,1.585)); +#149130 = CIRCLE('',#149131,0.150003237278); +#149131 = AXIS2_PLACEMENT_3D('',#149132,#149133,#149134); +#149132 = CARTESIAN_POINT('',(110.77725117824,-111.5391032372,1.585)); +#149133 = DIRECTION('',(0.,0.,1.)); +#149134 = DIRECTION('',(0.195081268148,0.980787081286,-0.)); +#149135 = ORIENTED_EDGE('',*,*,#149136,.T.); +#149136 = EDGE_CURVE('',#149128,#149137,#149139,.T.); +#149137 = VERTEX_POINT('',#149138); +#149138 = CARTESIAN_POINT('',(110.687493,-111.4208,1.585)); +#149139 = LINE('',#149140,#149141); +#149140 = CARTESIAN_POINT('',(110.693914,-111.41438,1.585)); +#149141 = VECTOR('',#149142,1.); +#149142 = DIRECTION('',(-0.707161845375,-0.70705171271,0.)); +#149143 = ORIENTED_EDGE('',*,*,#149144,.T.); +#149144 = EDGE_CURVE('',#149137,#149145,#149147,.T.); +#149145 = VERTEX_POINT('',#149146); +#149146 = CARTESIAN_POINT('',(110.587316,-111.420256,1.585)); +#149147 = LINE('',#149148,#149149); +#149148 = CARTESIAN_POINT('',(110.687493,-111.4208,1.585)); +#149149 = VECTOR('',#149150,1.); +#149150 = DIRECTION('',(-0.999985255768,5.430308146009E-03,0.)); +#149151 = ORIENTED_EDGE('',*,*,#149152,.T.); +#149152 = EDGE_CURVE('',#149145,#149153,#149155,.T.); +#149153 = VERTEX_POINT('',#149154); +#149154 = CARTESIAN_POINT('',(110.343091,-111.172074,1.585)); +#149155 = CIRCLE('',#149156,0.348628446662); +#149156 = AXIS2_PLACEMENT_3D('',#149157,#149158,#149159); +#149157 = CARTESIAN_POINT('',(110.68049161322,-111.0843094284,1.585)); +#149158 = DIRECTION('',(0.,0.,-1.)); +#149159 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#149160 = ORIENTED_EDGE('',*,*,#149161,.T.); +#149161 = EDGE_CURVE('',#149153,#149162,#149164,.T.); +#149162 = VERTEX_POINT('',#149163); +#149163 = CARTESIAN_POINT('',(110.344313,-110.851919,1.585)); +#149164 = LINE('',#149165,#149166); +#149165 = CARTESIAN_POINT('',(110.343091,-111.172074,1.585)); +#149166 = VECTOR('',#149167,1.); +#149167 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#149168 = ORIENTED_EDGE('',*,*,#149169,.T.); +#149169 = EDGE_CURVE('',#149162,#149170,#149172,.T.); +#149170 = VERTEX_POINT('',#149171); +#149171 = CARTESIAN_POINT('',(110.592494,-110.607693,1.585)); +#149172 = CIRCLE('',#149173,0.3486213829); +#149173 = AXIS2_PLACEMENT_3D('',#149174,#149175,#149176); +#149174 = CARTESIAN_POINT('',(110.68025422951,-110.9450874438,1.585)); +#149175 = DIRECTION('',(0.,0.,-1.)); +#149176 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#149177 = ORIENTED_EDGE('',*,*,#149178,.T.); +#149178 = EDGE_CURVE('',#149170,#149179,#149181,.T.); +#149179 = VERTEX_POINT('',#149180); +#149180 = CARTESIAN_POINT('',(110.81784,-110.609079,1.585)); +#149181 = LINE('',#149182,#149183); +#149182 = CARTESIAN_POINT('',(110.592494,-110.607693,1.585)); +#149183 = VECTOR('',#149184,1.); +#149184 = DIRECTION('',(0.999981085954,-6.150425501802E-03,0.)); +#149185 = ORIENTED_EDGE('',*,*,#149186,.T.); +#149186 = EDGE_CURVE('',#149179,#149187,#149189,.T.); +#149187 = VERTEX_POINT('',#149188); +#149188 = CARTESIAN_POINT('',(110.819281,-110.333287,1.585)); +#149189 = LINE('',#149190,#149191); +#149190 = CARTESIAN_POINT('',(110.81784,-110.609079,1.585)); +#149191 = VECTOR('',#149192,1.); +#149192 = DIRECTION('',(5.22488081838E-03,0.999986350217,0.)); +#149193 = ORIENTED_EDGE('',*,*,#149194,.T.); +#149194 = EDGE_CURVE('',#149187,#149195,#149197,.T.); +#149195 = VERTEX_POINT('',#149196); +#149196 = CARTESIAN_POINT('',(110.83048,-110.306251,1.585)); +#149197 = LINE('',#149198,#149199); +#149198 = CARTESIAN_POINT('',(110.819281,-110.333287,1.585)); +#149199 = VECTOR('',#149200,1.); +#149200 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#149201 = ORIENTED_EDGE('',*,*,#149202,.T.); +#149202 = EDGE_CURVE('',#149195,#149084,#149203,.T.); +#149203 = LINE('',#149204,#149205); +#149204 = CARTESIAN_POINT('',(110.83048,-110.306251,1.585)); +#149205 = VECTOR('',#149206,1.); +#149206 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#149207 = FACE_BOUND('',#149208,.F.); +#149208 = EDGE_LOOP('',(#149209,#149219,#149227,#149236,#149244,#149253, + #149261,#149269)); +#149209 = ORIENTED_EDGE('',*,*,#149210,.T.); +#149210 = EDGE_CURVE('',#149211,#149213,#149215,.T.); +#149211 = VERTEX_POINT('',#149212); +#149212 = CARTESIAN_POINT('',(110.81784,-110.775223,1.585)); +#149213 = VERTEX_POINT('',#149214); +#149214 = CARTESIAN_POINT('',(110.779897,-110.756252,1.585)); +#149215 = LINE('',#149216,#149217); +#149216 = CARTESIAN_POINT('',(110.81784,-110.775223,1.585)); +#149217 = VECTOR('',#149218,1.); +#149218 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#149219 = ORIENTED_EDGE('',*,*,#149220,.T.); +#149220 = EDGE_CURVE('',#149213,#149221,#149223,.T.); +#149221 = VERTEX_POINT('',#149222); +#149222 = CARTESIAN_POINT('',(110.624831,-110.756252,1.585)); +#149223 = LINE('',#149224,#149225); +#149224 = CARTESIAN_POINT('',(110.779897,-110.756252,1.585)); +#149225 = VECTOR('',#149226,1.); +#149226 = DIRECTION('',(-1.,0.,0.)); +#149227 = ORIENTED_EDGE('',*,*,#149228,.T.); +#149228 = EDGE_CURVE('',#149221,#149229,#149231,.T.); +#149229 = VERTEX_POINT('',#149230); +#149230 = CARTESIAN_POINT('',(110.49165,-110.889433,1.585)); +#149231 = CIRCLE('',#149232,0.18686440374); +#149232 = AXIS2_PLACEMENT_3D('',#149233,#149234,#149235); +#149233 = CARTESIAN_POINT('',(110.672367,-110.936969,1.585)); +#149234 = DIRECTION('',(0.,0.,1.)); +#149235 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#149236 = ORIENTED_EDGE('',*,*,#149237,.T.); +#149237 = EDGE_CURVE('',#149229,#149238,#149240,.T.); +#149238 = VERTEX_POINT('',#149239); +#149239 = CARTESIAN_POINT('',(110.49165,-111.139737,1.585)); +#149240 = LINE('',#149241,#149242); +#149241 = CARTESIAN_POINT('',(110.49165,-110.889433,1.585)); +#149242 = VECTOR('',#149243,1.); +#149243 = DIRECTION('',(0.,-1.,0.)); +#149244 = ORIENTED_EDGE('',*,*,#149245,.T.); +#149245 = EDGE_CURVE('',#149238,#149246,#149248,.T.); +#149246 = VERTEX_POINT('',#149247); +#149247 = CARTESIAN_POINT('',(110.624831,-111.272919,1.585)); +#149248 = CIRCLE('',#149249,0.186867373533); +#149249 = AXIS2_PLACEMENT_3D('',#149250,#149251,#149252); +#149250 = CARTESIAN_POINT('',(110.67236971388,-111.092199643,1.585)); +#149251 = DIRECTION('',(0.,0.,1.)); +#149252 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#149253 = ORIENTED_EDGE('',*,*,#149254,.T.); +#149254 = EDGE_CURVE('',#149246,#149255,#149257,.T.); +#149255 = VERTEX_POINT('',#149256); +#149256 = CARTESIAN_POINT('',(110.779897,-111.272919,1.585)); +#149257 = LINE('',#149258,#149259); +#149258 = CARTESIAN_POINT('',(110.624831,-111.272919,1.585)); +#149259 = VECTOR('',#149260,1.); +#149260 = DIRECTION('',(1.,0.,0.)); +#149261 = ORIENTED_EDGE('',*,*,#149262,.T.); +#149262 = EDGE_CURVE('',#149255,#149263,#149265,.T.); +#149263 = VERTEX_POINT('',#149264); +#149264 = CARTESIAN_POINT('',(110.81784,-111.253947,1.585)); +#149265 = LINE('',#149266,#149267); +#149266 = CARTESIAN_POINT('',(110.779897,-111.272919,1.585)); +#149267 = VECTOR('',#149268,1.); +#149268 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#149269 = ORIENTED_EDGE('',*,*,#149270,.T.); +#149270 = EDGE_CURVE('',#149263,#149211,#149271,.T.); +#149271 = LINE('',#149272,#149273); +#149272 = CARTESIAN_POINT('',(110.81784,-111.253947,1.585)); +#149273 = VECTOR('',#149274,1.); +#149274 = DIRECTION('',(0.,1.,0.)); +#149275 = PLANE('',#149276); +#149276 = AXIS2_PLACEMENT_3D('',#149277,#149278,#149279); +#149277 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149278 = DIRECTION('',(0.,0.,1.)); +#149279 = DIRECTION('',(1.,0.,-0.)); +#149280 = SHELL_BASED_SURFACE_MODEL('',(#149281)); +#149281 = OPEN_SHELL('',(#149282)); +#149282 = ADVANCED_FACE('',(#149283),#149441,.T.); +#149283 = FACE_BOUND('',#149284,.F.); +#149284 = EDGE_LOOP('',(#149285,#149295,#149303,#149312,#149320,#149328, + #149336,#149344,#149352,#149361,#149369,#149377,#149386,#149394, + #149402,#149411,#149419,#149427,#149435)); +#149285 = ORIENTED_EDGE('',*,*,#149286,.T.); +#149286 = EDGE_CURVE('',#149287,#149289,#149291,.T.); +#149287 = VERTEX_POINT('',#149288); +#149288 = CARTESIAN_POINT('',(111.383109,-110.328456,1.585)); +#149289 = VERTEX_POINT('',#149290); +#149290 = CARTESIAN_POINT('',(111.497256,-110.27436,1.585)); +#149291 = LINE('',#149292,#149293); +#149292 = CARTESIAN_POINT('',(111.383109,-110.328456,1.585)); +#149293 = VECTOR('',#149294,1.); +#149294 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#149295 = ORIENTED_EDGE('',*,*,#149296,.T.); +#149296 = EDGE_CURVE('',#149289,#149297,#149299,.T.); +#149297 = VERTEX_POINT('',#149298); +#149298 = CARTESIAN_POINT('',(111.621758,-110.27436,1.585)); +#149299 = LINE('',#149300,#149301); +#149300 = CARTESIAN_POINT('',(111.497256,-110.27436,1.585)); +#149301 = VECTOR('',#149302,1.); +#149302 = DIRECTION('',(1.,0.,0.)); +#149303 = ORIENTED_EDGE('',*,*,#149304,.T.); +#149304 = EDGE_CURVE('',#149297,#149305,#149307,.T.); +#149305 = VERTEX_POINT('',#149306); +#149306 = CARTESIAN_POINT('',(111.607126,-110.422919,1.585)); +#149307 = CIRCLE('',#149308,7.500006711464E-02); +#149308 = AXIS2_PLACEMENT_3D('',#149309,#149310,#149311); +#149309 = CARTESIAN_POINT('',(111.60712606711,-110.3479189328,1.585)); +#149310 = DIRECTION('',(0.,0.,-1.)); +#149311 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149312 = ORIENTED_EDGE('',*,*,#149313,.T.); +#149313 = EDGE_CURVE('',#149305,#149314,#149316,.T.); +#149314 = VERTEX_POINT('',#149315); +#149315 = CARTESIAN_POINT('',(111.529593,-110.422919,1.585)); +#149316 = LINE('',#149317,#149318); +#149317 = CARTESIAN_POINT('',(111.607126,-110.422919,1.585)); +#149318 = VECTOR('',#149319,1.); +#149319 = DIRECTION('',(-1.,0.,0.)); +#149320 = ORIENTED_EDGE('',*,*,#149321,.T.); +#149321 = EDGE_CURVE('',#149314,#149322,#149324,.T.); +#149322 = VERTEX_POINT('',#149323); +#149323 = CARTESIAN_POINT('',(111.472551,-110.451439,1.585)); +#149324 = LINE('',#149325,#149326); +#149325 = CARTESIAN_POINT('',(111.529593,-110.422919,1.585)); +#149326 = VECTOR('',#149327,1.); +#149327 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#149328 = ORIENTED_EDGE('',*,*,#149329,.T.); +#149329 = EDGE_CURVE('',#149322,#149330,#149332,.T.); +#149330 = VERTEX_POINT('',#149331); +#149331 = CARTESIAN_POINT('',(111.444031,-110.508481,1.585)); +#149332 = LINE('',#149333,#149334); +#149333 = CARTESIAN_POINT('',(111.472551,-110.451439,1.585)); +#149334 = VECTOR('',#149335,1.); +#149335 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#149336 = ORIENTED_EDGE('',*,*,#149337,.T.); +#149337 = EDGE_CURVE('',#149330,#149338,#149340,.T.); +#149338 = VERTEX_POINT('',#149339); +#149339 = CARTESIAN_POINT('',(111.444031,-110.606252,1.585)); +#149340 = LINE('',#149341,#149342); +#149341 = CARTESIAN_POINT('',(111.444031,-110.508481,1.585)); +#149342 = VECTOR('',#149343,1.); +#149343 = DIRECTION('',(0.,-1.,0.)); +#149344 = ORIENTED_EDGE('',*,*,#149345,.T.); +#149345 = EDGE_CURVE('',#149338,#149346,#149348,.T.); +#149346 = VERTEX_POINT('',#149347); +#149347 = CARTESIAN_POINT('',(111.621758,-110.607693,1.585)); +#149348 = LINE('',#149349,#149350); +#149349 = CARTESIAN_POINT('',(111.444031,-110.606252,1.585)); +#149350 = VECTOR('',#149351,1.); +#149351 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#149352 = ORIENTED_EDGE('',*,*,#149353,.T.); +#149353 = EDGE_CURVE('',#149346,#149354,#149356,.T.); +#149354 = VERTEX_POINT('',#149355); +#149355 = CARTESIAN_POINT('',(111.607126,-110.756252,1.585)); +#149356 = CIRCLE('',#149357,7.500006711464E-02); +#149357 = AXIS2_PLACEMENT_3D('',#149358,#149359,#149360); +#149358 = CARTESIAN_POINT('',(111.60712606711,-110.6812519328,1.585)); +#149359 = DIRECTION('',(0.,0.,-1.)); +#149360 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149361 = ORIENTED_EDGE('',*,*,#149362,.T.); +#149362 = EDGE_CURVE('',#149354,#149363,#149365,.T.); +#149363 = VERTEX_POINT('',#149364); +#149364 = CARTESIAN_POINT('',(111.444031,-110.756252,1.585)); +#149365 = LINE('',#149366,#149367); +#149366 = CARTESIAN_POINT('',(111.607126,-110.756252,1.585)); +#149367 = VECTOR('',#149368,1.); +#149368 = DIRECTION('',(-1.,0.,0.)); +#149369 = ORIENTED_EDGE('',*,*,#149370,.T.); +#149370 = EDGE_CURVE('',#149363,#149371,#149373,.T.); +#149371 = VERTEX_POINT('',#149372); +#149372 = CARTESIAN_POINT('',(111.44259,-111.362551,1.585)); +#149373 = LINE('',#149374,#149375); +#149374 = CARTESIAN_POINT('',(111.444031,-110.756252,1.585)); +#149375 = VECTOR('',#149376,1.); +#149376 = DIRECTION('',(-2.376708406372E-03,-0.999997175625,0.)); +#149377 = ORIENTED_EDGE('',*,*,#149378,.T.); +#149378 = EDGE_CURVE('',#149371,#149379,#149381,.T.); +#149379 = VERTEX_POINT('',#149380); +#149380 = CARTESIAN_POINT('',(111.294031,-111.347919,1.585)); +#149381 = CIRCLE('',#149382,7.500006711463E-02); +#149382 = AXIS2_PLACEMENT_3D('',#149383,#149384,#149385); +#149383 = CARTESIAN_POINT('',(111.36903106711,-111.3479190671,1.585)); +#149384 = DIRECTION('',(-0.,0.,-1.)); +#149385 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#149386 = ORIENTED_EDGE('',*,*,#149387,.T.); +#149387 = EDGE_CURVE('',#149379,#149388,#149390,.T.); +#149388 = VERTEX_POINT('',#149389); +#149389 = CARTESIAN_POINT('',(111.294031,-110.756252,1.585)); +#149390 = LINE('',#149391,#149392); +#149391 = CARTESIAN_POINT('',(111.294031,-111.347919,1.585)); +#149392 = VECTOR('',#149393,1.); +#149393 = DIRECTION('',(0.,1.,0.)); +#149394 = ORIENTED_EDGE('',*,*,#149395,.T.); +#149395 = EDGE_CURVE('',#149388,#149396,#149398,.T.); +#149396 = VERTEX_POINT('',#149397); +#149397 = CARTESIAN_POINT('',(111.211542,-110.754811,1.585)); +#149398 = LINE('',#149399,#149400); +#149399 = CARTESIAN_POINT('',(111.294031,-110.756252,1.585)); +#149400 = VECTOR('',#149401,1.); +#149401 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#149402 = ORIENTED_EDGE('',*,*,#149403,.T.); +#149403 = EDGE_CURVE('',#149396,#149404,#149406,.T.); +#149404 = VERTEX_POINT('',#149405); +#149405 = CARTESIAN_POINT('',(111.226174,-110.606252,1.585)); +#149406 = CIRCLE('',#149407,7.500006711463E-02); +#149407 = AXIS2_PLACEMENT_3D('',#149408,#149409,#149410); +#149408 = CARTESIAN_POINT('',(111.22617393288,-110.6812520671,1.585)); +#149409 = DIRECTION('',(0.,0.,-1.)); +#149410 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#149411 = ORIENTED_EDGE('',*,*,#149412,.T.); +#149412 = EDGE_CURVE('',#149404,#149413,#149415,.T.); +#149413 = VERTEX_POINT('',#149414); +#149414 = CARTESIAN_POINT('',(111.294031,-110.606252,1.585)); +#149415 = LINE('',#149416,#149417); +#149416 = CARTESIAN_POINT('',(111.226174,-110.606252,1.585)); +#149417 = VECTOR('',#149418,1.); +#149418 = DIRECTION('',(1.,0.,0.)); +#149419 = ORIENTED_EDGE('',*,*,#149420,.T.); +#149420 = EDGE_CURVE('',#149413,#149421,#149423,.T.); +#149421 = VERTEX_POINT('',#149422); +#149422 = CARTESIAN_POINT('',(111.296694,-110.470967,1.585)); +#149423 = LINE('',#149424,#149425); +#149424 = CARTESIAN_POINT('',(111.294031,-110.606252,1.585)); +#149425 = VECTOR('',#149426,1.); +#149426 = DIRECTION('',(1.968055754655E-02,0.999806319071,0.)); +#149427 = ORIENTED_EDGE('',*,*,#149428,.T.); +#149428 = EDGE_CURVE('',#149421,#149429,#149431,.T.); +#149429 = VERTEX_POINT('',#149430); +#149430 = CARTESIAN_POINT('',(111.3574,-110.349554,1.585)); +#149431 = LINE('',#149432,#149433); +#149432 = CARTESIAN_POINT('',(111.296694,-110.470967,1.585)); +#149433 = VECTOR('',#149434,1.); +#149434 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#149435 = ORIENTED_EDGE('',*,*,#149436,.T.); +#149436 = EDGE_CURVE('',#149429,#149287,#149437,.T.); +#149437 = LINE('',#149438,#149439); +#149438 = CARTESIAN_POINT('',(111.3574,-110.349554,1.585)); +#149439 = VECTOR('',#149440,1.); +#149440 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#149441 = PLANE('',#149442); +#149442 = AXIS2_PLACEMENT_3D('',#149443,#149444,#149445); +#149443 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149444 = DIRECTION('',(0.,0.,1.)); +#149445 = DIRECTION('',(1.,0.,-0.)); +#149446 = SHELL_BASED_SURFACE_MODEL('',(#149447)); +#149447 = OPEN_SHELL('',(#149448)); +#149448 = ADVANCED_FACE('',(#149449),#149591,.T.); +#149449 = FACE_BOUND('',#149450,.F.); +#149450 = EDGE_LOOP('',(#149451,#149462,#149470,#149478,#149486,#149494, + #149502,#149510,#149518,#149527,#149535,#149544,#149552,#149560, + #149568,#149576,#149585)); +#149451 = ORIENTED_EDGE('',*,*,#149452,.T.); +#149452 = EDGE_CURVE('',#149453,#149455,#149457,.T.); +#149453 = VERTEX_POINT('',#149454); +#149454 = CARTESIAN_POINT('',(111.898792,-110.618892,1.585)); +#149455 = VERTEX_POINT('',#149456); +#149456 = CARTESIAN_POINT('',(112.01546,-110.681252,1.585)); +#149457 = CIRCLE('',#149458,7.500000000003E-02); +#149458 = AXIS2_PLACEMENT_3D('',#149459,#149460,#149461); +#149459 = CARTESIAN_POINT('',(111.94046,-110.6812520655,1.585)); +#149460 = DIRECTION('',(0.,0.,-1.)); +#149461 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#149462 = ORIENTED_EDGE('',*,*,#149463,.T.); +#149463 = EDGE_CURVE('',#149455,#149464,#149466,.T.); +#149464 = VERTEX_POINT('',#149465); +#149465 = CARTESIAN_POINT('',(112.01546,-111.187356,1.585)); +#149466 = LINE('',#149467,#149468); +#149467 = CARTESIAN_POINT('',(112.01546,-110.681252,1.585)); +#149468 = VECTOR('',#149469,1.); +#149469 = DIRECTION('',(0.,-1.,0.)); +#149470 = ORIENTED_EDGE('',*,*,#149471,.T.); +#149471 = EDGE_CURVE('',#149464,#149472,#149474,.T.); +#149472 = VERTEX_POINT('',#149473); +#149473 = CARTESIAN_POINT('',(112.04398,-111.244398,1.585)); +#149474 = LINE('',#149475,#149476); +#149475 = CARTESIAN_POINT('',(112.01546,-111.187356,1.585)); +#149476 = VECTOR('',#149477,1.); +#149477 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#149478 = ORIENTED_EDGE('',*,*,#149479,.T.); +#149479 = EDGE_CURVE('',#149472,#149480,#149482,.T.); +#149480 = VERTEX_POINT('',#149481); +#149481 = CARTESIAN_POINT('',(112.101022,-111.272919,1.585)); +#149482 = LINE('',#149483,#149484); +#149483 = CARTESIAN_POINT('',(112.04398,-111.244398,1.585)); +#149484 = VECTOR('',#149485,1.); +#149485 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#149486 = ORIENTED_EDGE('',*,*,#149487,.T.); +#149487 = EDGE_CURVE('',#149480,#149488,#149490,.T.); +#149488 = VERTEX_POINT('',#149489); +#149489 = CARTESIAN_POINT('',(112.208469,-111.272919,1.585)); +#149490 = LINE('',#149491,#149492); +#149491 = CARTESIAN_POINT('',(112.101022,-111.272919,1.585)); +#149492 = VECTOR('',#149493,1.); +#149493 = DIRECTION('',(1.,0.,0.)); +#149494 = ORIENTED_EDGE('',*,*,#149495,.T.); +#149495 = EDGE_CURVE('',#149488,#149496,#149498,.T.); +#149496 = VERTEX_POINT('',#149497); +#149497 = CARTESIAN_POINT('',(112.276984,-111.238661,1.585)); +#149498 = LINE('',#149499,#149500); +#149499 = CARTESIAN_POINT('',(112.208469,-111.272919,1.585)); +#149500 = VECTOR('',#149501,1.); +#149501 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#149502 = ORIENTED_EDGE('',*,*,#149503,.T.); +#149503 = EDGE_CURVE('',#149496,#149504,#149506,.T.); +#149504 = VERTEX_POINT('',#149505); +#149505 = CARTESIAN_POINT('',(112.294031,-111.221614,1.585)); +#149506 = LINE('',#149507,#149508); +#149507 = CARTESIAN_POINT('',(112.276984,-111.238661,1.585)); +#149508 = VECTOR('',#149509,1.); +#149509 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#149510 = ORIENTED_EDGE('',*,*,#149511,.T.); +#149511 = EDGE_CURVE('',#149504,#149512,#149514,.T.); +#149512 = VERTEX_POINT('',#149513); +#149513 = CARTESIAN_POINT('',(112.295472,-110.66662,1.585)); +#149514 = LINE('',#149515,#149516); +#149515 = CARTESIAN_POINT('',(112.294031,-111.221614,1.585)); +#149516 = VECTOR('',#149517,1.); +#149517 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#149518 = ORIENTED_EDGE('',*,*,#149519,.T.); +#149519 = EDGE_CURVE('',#149512,#149520,#149522,.T.); +#149520 = VERTEX_POINT('',#149521); +#149521 = CARTESIAN_POINT('',(112.444031,-110.681252,1.585)); +#149522 = CIRCLE('',#149523,7.500006711464E-02); +#149523 = AXIS2_PLACEMENT_3D('',#149524,#149525,#149526); +#149524 = CARTESIAN_POINT('',(112.36903093288,-110.6812519328,1.585)); +#149525 = DIRECTION('',(0.,0.,-1.)); +#149526 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#149527 = ORIENTED_EDGE('',*,*,#149528,.T.); +#149528 = EDGE_CURVE('',#149520,#149529,#149531,.T.); +#149529 = VERTEX_POINT('',#149530); +#149530 = CARTESIAN_POINT('',(112.44259,-111.362551,1.585)); +#149531 = LINE('',#149532,#149533); +#149532 = CARTESIAN_POINT('',(112.444031,-110.681252,1.585)); +#149533 = VECTOR('',#149534,1.); +#149534 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#149535 = ORIENTED_EDGE('',*,*,#149536,.T.); +#149536 = EDGE_CURVE('',#149529,#149537,#149539,.T.); +#149537 = VERTEX_POINT('',#149538); +#149538 = CARTESIAN_POINT('',(112.307961,-111.390877,1.585)); +#149539 = CIRCLE('',#149540,7.472335361469E-02); +#149540 = AXIS2_PLACEMENT_3D('',#149541,#149542,#149543); +#149541 = CARTESIAN_POINT('',(112.36926658714,-111.3481545871,1.585)); +#149542 = DIRECTION('',(-0.,0.,-1.)); +#149543 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#149544 = ORIENTED_EDGE('',*,*,#149545,.T.); +#149545 = EDGE_CURVE('',#149537,#149546,#149548,.T.); +#149546 = VERTEX_POINT('',#149547); +#149547 = CARTESIAN_POINT('',(112.240806,-111.421478,1.585)); +#149548 = LINE('',#149549,#149550); +#149549 = CARTESIAN_POINT('',(112.307961,-111.390877,1.585)); +#149550 = VECTOR('',#149551,1.); +#149551 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#149552 = ORIENTED_EDGE('',*,*,#149553,.T.); +#149553 = EDGE_CURVE('',#149546,#149554,#149556,.T.); +#149554 = VERTEX_POINT('',#149555); +#149555 = CARTESIAN_POINT('',(112.063507,-111.420256,1.585)); +#149556 = LINE('',#149557,#149558); +#149557 = CARTESIAN_POINT('',(112.240806,-111.421478,1.585)); +#149558 = VECTOR('',#149559,1.); +#149559 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#149560 = ORIENTED_EDGE('',*,*,#149561,.T.); +#149561 = EDGE_CURVE('',#149554,#149562,#149564,.T.); +#149562 = VERTEX_POINT('',#149563); +#149563 = CARTESIAN_POINT('',(111.942095,-111.35955,1.585)); +#149564 = LINE('',#149565,#149566); +#149565 = CARTESIAN_POINT('',(112.063507,-111.420256,1.585)); +#149566 = VECTOR('',#149567,1.); +#149567 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#149568 = ORIENTED_EDGE('',*,*,#149569,.T.); +#149569 = EDGE_CURVE('',#149562,#149570,#149572,.T.); +#149570 = VERTEX_POINT('',#149571); +#149571 = CARTESIAN_POINT('',(111.920997,-111.333841,1.585)); +#149572 = LINE('',#149573,#149574); +#149573 = CARTESIAN_POINT('',(111.942095,-111.35955,1.585)); +#149574 = VECTOR('',#149575,1.); +#149575 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#149576 = ORIENTED_EDGE('',*,*,#149577,.T.); +#149577 = EDGE_CURVE('',#149570,#149578,#149580,.T.); +#149578 = VERTEX_POINT('',#149579); +#149579 = CARTESIAN_POINT('',(111.8781,-110.639584,1.585)); +#149580 = CIRCLE('',#149581,0.780471555046); +#149581 = AXIS2_PLACEMENT_3D('',#149582,#149583,#149584); +#149582 = CARTESIAN_POINT('',(112.59691564715,-110.9436233291,1.585)); +#149583 = DIRECTION('',(0.,0.,-1.)); +#149584 = DIRECTION('',(-0.866038797673,-0.499976800387,-0.)); +#149585 = ORIENTED_EDGE('',*,*,#149586,.T.); +#149586 = EDGE_CURVE('',#149578,#149453,#149587,.T.); +#149587 = LINE('',#149588,#149589); +#149588 = CARTESIAN_POINT('',(111.8781,-110.639584,1.585)); +#149589 = VECTOR('',#149590,1.); +#149590 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#149591 = PLANE('',#149592); +#149592 = AXIS2_PLACEMENT_3D('',#149593,#149594,#149595); +#149593 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149594 = DIRECTION('',(0.,0.,1.)); +#149595 = DIRECTION('',(1.,0.,-0.)); +#149596 = SHELL_BASED_SURFACE_MODEL('',(#149597)); +#149597 = OPEN_SHELL('',(#149598)); +#149598 = ADVANCED_FACE('',(#149599),#149734,.T.); +#149599 = FACE_BOUND('',#149600,.F.); +#149600 = EDGE_LOOP('',(#149601,#149612,#149620,#149628,#149636,#149645, + #149653,#149661,#149670,#149678,#149686,#149695,#149703,#149711, + #149720,#149728)); +#149601 = ORIENTED_EDGE('',*,*,#149602,.T.); +#149602 = EDGE_CURVE('',#149603,#149605,#149607,.T.); +#149603 = VERTEX_POINT('',#149604); +#149604 = CARTESIAN_POINT('',(114.846857,-110.241051,1.585)); +#149605 = VERTEX_POINT('',#149606); +#149606 = CARTESIAN_POINT('',(114.963991,-110.324018,1.585)); +#149607 = CIRCLE('',#149608,7.499955990671E-02); +#149608 = AXIS2_PLACEMENT_3D('',#149609,#149610,#149611); +#149609 = CARTESIAN_POINT('',(114.89284050095,-110.3003000643,1.585)); +#149610 = DIRECTION('',(0.,0.,-1.)); +#149611 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#149612 = ORIENTED_EDGE('',*,*,#149613,.T.); +#149613 = EDGE_CURVE('',#149605,#149614,#149616,.T.); +#149614 = VERTEX_POINT('',#149615); +#149615 = CARTESIAN_POINT('',(114.758802,-110.939585,1.585)); +#149616 = LINE('',#149617,#149618); +#149617 = CARTESIAN_POINT('',(114.963991,-110.324018,1.585)); +#149618 = VECTOR('',#149619,1.); +#149619 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#149620 = ORIENTED_EDGE('',*,*,#149621,.T.); +#149621 = EDGE_CURVE('',#149614,#149622,#149624,.T.); +#149622 = VERTEX_POINT('',#149623); +#149623 = CARTESIAN_POINT('',(115.055935,-110.939585,1.585)); +#149624 = LINE('',#149625,#149626); +#149625 = CARTESIAN_POINT('',(114.758802,-110.939585,1.585)); +#149626 = VECTOR('',#149627,1.); +#149627 = DIRECTION('',(1.,0.,0.)); +#149628 = ORIENTED_EDGE('',*,*,#149629,.T.); +#149629 = EDGE_CURVE('',#149622,#149630,#149632,.T.); +#149630 = VERTEX_POINT('',#149631); +#149631 = CARTESIAN_POINT('',(115.057376,-110.66662,1.585)); +#149632 = LINE('',#149633,#149634); +#149633 = CARTESIAN_POINT('',(115.055935,-110.939585,1.585)); +#149634 = VECTOR('',#149635,1.); +#149635 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#149636 = ORIENTED_EDGE('',*,*,#149637,.T.); +#149637 = EDGE_CURVE('',#149630,#149638,#149640,.T.); +#149638 = VERTEX_POINT('',#149639); +#149639 = CARTESIAN_POINT('',(115.205935,-110.681252,1.585)); +#149640 = CIRCLE('',#149641,7.500006711464E-02); +#149641 = AXIS2_PLACEMENT_3D('',#149642,#149643,#149644); +#149642 = CARTESIAN_POINT('',(115.13093493288,-110.6812519328,1.585)); +#149643 = DIRECTION('',(0.,0.,-1.)); +#149644 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#149645 = ORIENTED_EDGE('',*,*,#149646,.T.); +#149646 = EDGE_CURVE('',#149638,#149647,#149649,.T.); +#149647 = VERTEX_POINT('',#149648); +#149648 = CARTESIAN_POINT('',(115.205935,-110.939585,1.585)); +#149649 = LINE('',#149650,#149651); +#149650 = CARTESIAN_POINT('',(115.205935,-110.681252,1.585)); +#149651 = VECTOR('',#149652,1.); +#149652 = DIRECTION('',(0.,-1.,0.)); +#149653 = ORIENTED_EDGE('',*,*,#149654,.T.); +#149654 = EDGE_CURVE('',#149647,#149655,#149657,.T.); +#149655 = VERTEX_POINT('',#149656); +#149656 = CARTESIAN_POINT('',(115.288424,-110.941026,1.585)); +#149657 = LINE('',#149658,#149659); +#149658 = CARTESIAN_POINT('',(115.205935,-110.939585,1.585)); +#149659 = VECTOR('',#149660,1.); +#149660 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#149661 = ORIENTED_EDGE('',*,*,#149662,.T.); +#149662 = EDGE_CURVE('',#149655,#149663,#149665,.T.); +#149663 = VERTEX_POINT('',#149664); +#149664 = CARTESIAN_POINT('',(115.273792,-111.089585,1.585)); +#149665 = CIRCLE('',#149666,7.500006711464E-02); +#149666 = AXIS2_PLACEMENT_3D('',#149667,#149668,#149669); +#149667 = CARTESIAN_POINT('',(115.27379206711,-111.0145849328,1.585)); +#149668 = DIRECTION('',(0.,0.,-1.)); +#149669 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149670 = ORIENTED_EDGE('',*,*,#149671,.T.); +#149671 = EDGE_CURVE('',#149663,#149672,#149674,.T.); +#149672 = VERTEX_POINT('',#149673); +#149673 = CARTESIAN_POINT('',(115.205935,-111.089585,1.585)); +#149674 = LINE('',#149675,#149676); +#149675 = CARTESIAN_POINT('',(115.273792,-111.089585,1.585)); +#149676 = VECTOR('',#149677,1.); +#149677 = DIRECTION('',(-1.,0.,0.)); +#149678 = ORIENTED_EDGE('',*,*,#149679,.T.); +#149679 = EDGE_CURVE('',#149672,#149680,#149682,.T.); +#149680 = VERTEX_POINT('',#149681); +#149681 = CARTESIAN_POINT('',(115.204494,-111.362551,1.585)); +#149682 = LINE('',#149683,#149684); +#149683 = CARTESIAN_POINT('',(115.205935,-111.089585,1.585)); +#149684 = VECTOR('',#149685,1.); +#149685 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#149686 = ORIENTED_EDGE('',*,*,#149687,.T.); +#149687 = EDGE_CURVE('',#149680,#149688,#149690,.T.); +#149688 = VERTEX_POINT('',#149689); +#149689 = CARTESIAN_POINT('',(115.055935,-111.347919,1.585)); +#149690 = CIRCLE('',#149691,7.500006711464E-02); +#149691 = AXIS2_PLACEMENT_3D('',#149692,#149693,#149694); +#149692 = CARTESIAN_POINT('',(115.13093506711,-111.3479190671,1.585)); +#149693 = DIRECTION('',(-0.,0.,-1.)); +#149694 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#149695 = ORIENTED_EDGE('',*,*,#149696,.T.); +#149696 = EDGE_CURVE('',#149688,#149697,#149699,.T.); +#149697 = VERTEX_POINT('',#149698); +#149698 = CARTESIAN_POINT('',(115.055935,-111.089585,1.585)); +#149699 = LINE('',#149700,#149701); +#149700 = CARTESIAN_POINT('',(115.055935,-111.347919,1.585)); +#149701 = VECTOR('',#149702,1.); +#149702 = DIRECTION('',(0.,1.,0.)); +#149703 = ORIENTED_EDGE('',*,*,#149704,.T.); +#149704 = EDGE_CURVE('',#149697,#149705,#149707,.T.); +#149705 = VERTEX_POINT('',#149706); +#149706 = CARTESIAN_POINT('',(114.640113,-111.088144,1.585)); +#149707 = LINE('',#149708,#149709); +#149708 = CARTESIAN_POINT('',(115.055935,-111.089585,1.585)); +#149709 = VECTOR('',#149710,1.); +#149710 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#149711 = ORIENTED_EDGE('',*,*,#149712,.T.); +#149712 = EDGE_CURVE('',#149705,#149713,#149715,.T.); +#149713 = VERTEX_POINT('',#149714); +#149714 = CARTESIAN_POINT('',(114.583594,-110.990868,1.585)); +#149715 = CIRCLE('',#149716,7.499997045036E-02); +#149716 = AXIS2_PLACEMENT_3D('',#149717,#149718,#149719); +#149717 = CARTESIAN_POINT('',(114.65474517257,-111.0145852133,1.585)); +#149718 = DIRECTION('',(0.,0.,-1.)); +#149719 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#149720 = ORIENTED_EDGE('',*,*,#149721,.T.); +#149721 = EDGE_CURVE('',#149713,#149722,#149724,.T.); +#149722 = VERTEX_POINT('',#149723); +#149723 = CARTESIAN_POINT('',(114.827683,-110.263158,1.585)); +#149724 = LINE('',#149725,#149726); +#149725 = CARTESIAN_POINT('',(114.583594,-110.990868,1.585)); +#149726 = VECTOR('',#149727,1.); +#149727 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#149728 = ORIENTED_EDGE('',*,*,#149729,.T.); +#149729 = EDGE_CURVE('',#149722,#149603,#149730,.T.); +#149730 = LINE('',#149731,#149732); +#149731 = CARTESIAN_POINT('',(114.827683,-110.263158,1.585)); +#149732 = VECTOR('',#149733,1.); +#149733 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#149734 = PLANE('',#149735); +#149735 = AXIS2_PLACEMENT_3D('',#149736,#149737,#149738); +#149736 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149737 = DIRECTION('',(0.,0.,1.)); +#149738 = DIRECTION('',(1.,0.,-0.)); +#149739 = SHELL_BASED_SURFACE_MODEL('',(#149740)); +#149740 = OPEN_SHELL('',(#149741)); +#149741 = ADVANCED_FACE('',(#149742),#149877,.T.); +#149742 = FACE_BOUND('',#149743,.F.); +#149743 = EDGE_LOOP('',(#149744,#149755,#149763,#149771,#149779,#149788, + #149796,#149804,#149813,#149821,#149829,#149838,#149846,#149854, + #149863,#149871)); +#149744 = ORIENTED_EDGE('',*,*,#149745,.T.); +#149745 = EDGE_CURVE('',#149746,#149748,#149750,.T.); +#149746 = VERTEX_POINT('',#149747); +#149747 = CARTESIAN_POINT('',(119.799238,-110.241051,1.585)); +#149748 = VERTEX_POINT('',#149749); +#149749 = CARTESIAN_POINT('',(119.916372,-110.324018,1.585)); +#149750 = CIRCLE('',#149751,7.499955990671E-02); +#149751 = AXIS2_PLACEMENT_3D('',#149752,#149753,#149754); +#149752 = CARTESIAN_POINT('',(119.84522150095,-110.3003000643,1.585)); +#149753 = DIRECTION('',(0.,0.,-1.)); +#149754 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#149755 = ORIENTED_EDGE('',*,*,#149756,.T.); +#149756 = EDGE_CURVE('',#149748,#149757,#149759,.T.); +#149757 = VERTEX_POINT('',#149758); +#149758 = CARTESIAN_POINT('',(119.711183,-110.939585,1.585)); +#149759 = LINE('',#149760,#149761); +#149760 = CARTESIAN_POINT('',(119.916372,-110.324018,1.585)); +#149761 = VECTOR('',#149762,1.); +#149762 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#149763 = ORIENTED_EDGE('',*,*,#149764,.T.); +#149764 = EDGE_CURVE('',#149757,#149765,#149767,.T.); +#149765 = VERTEX_POINT('',#149766); +#149766 = CARTESIAN_POINT('',(120.008316,-110.939585,1.585)); +#149767 = LINE('',#149768,#149769); +#149768 = CARTESIAN_POINT('',(119.711183,-110.939585,1.585)); +#149769 = VECTOR('',#149770,1.); +#149770 = DIRECTION('',(1.,0.,0.)); +#149771 = ORIENTED_EDGE('',*,*,#149772,.T.); +#149772 = EDGE_CURVE('',#149765,#149773,#149775,.T.); +#149773 = VERTEX_POINT('',#149774); +#149774 = CARTESIAN_POINT('',(120.009757,-110.66662,1.585)); +#149775 = LINE('',#149776,#149777); +#149776 = CARTESIAN_POINT('',(120.008316,-110.939585,1.585)); +#149777 = VECTOR('',#149778,1.); +#149778 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#149779 = ORIENTED_EDGE('',*,*,#149780,.T.); +#149780 = EDGE_CURVE('',#149773,#149781,#149783,.T.); +#149781 = VERTEX_POINT('',#149782); +#149782 = CARTESIAN_POINT('',(120.158316,-110.681252,1.585)); +#149783 = CIRCLE('',#149784,7.500006711464E-02); +#149784 = AXIS2_PLACEMENT_3D('',#149785,#149786,#149787); +#149785 = CARTESIAN_POINT('',(120.08331593288,-110.6812519328,1.585)); +#149786 = DIRECTION('',(0.,0.,-1.)); +#149787 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#149788 = ORIENTED_EDGE('',*,*,#149789,.T.); +#149789 = EDGE_CURVE('',#149781,#149790,#149792,.T.); +#149790 = VERTEX_POINT('',#149791); +#149791 = CARTESIAN_POINT('',(120.158316,-110.939585,1.585)); +#149792 = LINE('',#149793,#149794); +#149793 = CARTESIAN_POINT('',(120.158316,-110.681252,1.585)); +#149794 = VECTOR('',#149795,1.); +#149795 = DIRECTION('',(0.,-1.,0.)); +#149796 = ORIENTED_EDGE('',*,*,#149797,.T.); +#149797 = EDGE_CURVE('',#149790,#149798,#149800,.T.); +#149798 = VERTEX_POINT('',#149799); +#149799 = CARTESIAN_POINT('',(120.240805,-110.941026,1.585)); +#149800 = LINE('',#149801,#149802); +#149801 = CARTESIAN_POINT('',(120.158316,-110.939585,1.585)); +#149802 = VECTOR('',#149803,1.); +#149803 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#149804 = ORIENTED_EDGE('',*,*,#149805,.T.); +#149805 = EDGE_CURVE('',#149798,#149806,#149808,.T.); +#149806 = VERTEX_POINT('',#149807); +#149807 = CARTESIAN_POINT('',(120.226173,-111.089585,1.585)); +#149808 = CIRCLE('',#149809,7.500006711464E-02); +#149809 = AXIS2_PLACEMENT_3D('',#149810,#149811,#149812); +#149810 = CARTESIAN_POINT('',(120.22617306711,-111.0145849328,1.585)); +#149811 = DIRECTION('',(0.,0.,-1.)); +#149812 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#149813 = ORIENTED_EDGE('',*,*,#149814,.T.); +#149814 = EDGE_CURVE('',#149806,#149815,#149817,.T.); +#149815 = VERTEX_POINT('',#149816); +#149816 = CARTESIAN_POINT('',(120.158316,-111.089585,1.585)); +#149817 = LINE('',#149818,#149819); +#149818 = CARTESIAN_POINT('',(120.226173,-111.089585,1.585)); +#149819 = VECTOR('',#149820,1.); +#149820 = DIRECTION('',(-1.,0.,0.)); +#149821 = ORIENTED_EDGE('',*,*,#149822,.T.); +#149822 = EDGE_CURVE('',#149815,#149823,#149825,.T.); +#149823 = VERTEX_POINT('',#149824); +#149824 = CARTESIAN_POINT('',(120.156875,-111.362551,1.585)); +#149825 = LINE('',#149826,#149827); +#149826 = CARTESIAN_POINT('',(120.158316,-111.089585,1.585)); +#149827 = VECTOR('',#149828,1.); +#149828 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#149829 = ORIENTED_EDGE('',*,*,#149830,.T.); +#149830 = EDGE_CURVE('',#149823,#149831,#149833,.T.); +#149831 = VERTEX_POINT('',#149832); +#149832 = CARTESIAN_POINT('',(120.008316,-111.347919,1.585)); +#149833 = CIRCLE('',#149834,7.500006711464E-02); +#149834 = AXIS2_PLACEMENT_3D('',#149835,#149836,#149837); +#149835 = CARTESIAN_POINT('',(120.08331606711,-111.3479190671,1.585)); +#149836 = DIRECTION('',(-0.,0.,-1.)); +#149837 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#149838 = ORIENTED_EDGE('',*,*,#149839,.T.); +#149839 = EDGE_CURVE('',#149831,#149840,#149842,.T.); +#149840 = VERTEX_POINT('',#149841); +#149841 = CARTESIAN_POINT('',(120.008316,-111.089585,1.585)); +#149842 = LINE('',#149843,#149844); +#149843 = CARTESIAN_POINT('',(120.008316,-111.347919,1.585)); +#149844 = VECTOR('',#149845,1.); +#149845 = DIRECTION('',(0.,1.,0.)); +#149846 = ORIENTED_EDGE('',*,*,#149847,.T.); +#149847 = EDGE_CURVE('',#149840,#149848,#149850,.T.); +#149848 = VERTEX_POINT('',#149849); +#149849 = CARTESIAN_POINT('',(119.592494,-111.088144,1.585)); +#149850 = LINE('',#149851,#149852); +#149851 = CARTESIAN_POINT('',(120.008316,-111.089585,1.585)); +#149852 = VECTOR('',#149853,1.); +#149853 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#149854 = ORIENTED_EDGE('',*,*,#149855,.T.); +#149855 = EDGE_CURVE('',#149848,#149856,#149858,.T.); +#149856 = VERTEX_POINT('',#149857); +#149857 = CARTESIAN_POINT('',(119.535975,-110.990868,1.585)); +#149858 = CIRCLE('',#149859,7.499997045038E-02); +#149859 = AXIS2_PLACEMENT_3D('',#149860,#149861,#149862); +#149860 = CARTESIAN_POINT('',(119.60712617257,-111.0145852133,1.585)); +#149861 = DIRECTION('',(0.,0.,-1.)); +#149862 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#149863 = ORIENTED_EDGE('',*,*,#149864,.T.); +#149864 = EDGE_CURVE('',#149856,#149865,#149867,.T.); +#149865 = VERTEX_POINT('',#149866); +#149866 = CARTESIAN_POINT('',(119.780064,-110.263158,1.585)); +#149867 = LINE('',#149868,#149869); +#149868 = CARTESIAN_POINT('',(119.535975,-110.990868,1.585)); +#149869 = VECTOR('',#149870,1.); +#149870 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#149871 = ORIENTED_EDGE('',*,*,#149872,.T.); +#149872 = EDGE_CURVE('',#149865,#149746,#149873,.T.); +#149873 = LINE('',#149874,#149875); +#149874 = CARTESIAN_POINT('',(119.780064,-110.263158,1.585)); +#149875 = VECTOR('',#149876,1.); +#149876 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#149877 = PLANE('',#149878); +#149878 = AXIS2_PLACEMENT_3D('',#149879,#149880,#149881); +#149879 = CARTESIAN_POINT('',(0.,0.,1.585)); +#149880 = DIRECTION('',(0.,0.,1.)); +#149881 = DIRECTION('',(1.,0.,-0.)); +#149882 = SHELL_BASED_SURFACE_MODEL('',(#149883)); +#149883 = OPEN_SHELL('',(#149884)); +#149884 = ADVANCED_FACE('',(#149885),#150071,.T.); +#149885 = FACE_BOUND('',#149886,.F.); +#149886 = EDGE_LOOP('',(#149887,#149898,#149906,#149915,#149923,#149931, + #149940,#149948,#149957,#149965,#149973,#149981,#149990,#149998, + #150007,#150015,#150024,#150032,#150040,#150048,#150057,#150065)); +#149887 = ORIENTED_EDGE('',*,*,#149888,.T.); +#149888 = EDGE_CURVE('',#149889,#149891,#149893,.T.); +#149889 = VERTEX_POINT('',#149890); +#149890 = CARTESIAN_POINT('',(124.592494,-110.421478,1.585)); +#149891 = VERTEX_POINT('',#149892); +#149892 = CARTESIAN_POINT('',(124.607126,-110.272919,1.585)); +#149893 = CIRCLE('',#149894,7.500006711463E-02); +#149894 = AXIS2_PLACEMENT_3D('',#149895,#149896,#149897); +#149895 = CARTESIAN_POINT('',(124.60712593288,-110.3479190671,1.585)); +#149896 = DIRECTION('',(0.,0.,-1.)); +#149897 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#149898 = ORIENTED_EDGE('',*,*,#149899,.T.); +#149899 = EDGE_CURVE('',#149891,#149900,#149902,.T.); +#149900 = VERTEX_POINT('',#149901); +#149901 = CARTESIAN_POINT('',(125.233911,-110.273681,1.585)); +#149902 = LINE('',#149903,#149904); +#149903 = CARTESIAN_POINT('',(124.607126,-110.272919,1.585)); +#149904 = VECTOR('',#149905,1.); +#149905 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#149906 = ORIENTED_EDGE('',*,*,#149907,.T.); +#149907 = EDGE_CURVE('',#149900,#149908,#149910,.T.); +#149908 = VERTEX_POINT('',#149909); +#149909 = CARTESIAN_POINT('',(125.299732,-110.362551,1.585)); +#149910 = CIRCLE('',#149911,7.447391611627E-02); +#149911 = AXIS2_PLACEMENT_3D('',#149912,#149913,#149914); +#149912 = CARTESIAN_POINT('',(125.22673192664,-110.3478080874,1.585)); +#149913 = DIRECTION('',(0.,0.,-1.)); +#149914 = DIRECTION('',(9.639715124831E-02,0.995342950561,0.)); +#149915 = ORIENTED_EDGE('',*,*,#149916,.T.); +#149916 = EDGE_CURVE('',#149908,#149917,#149919,.T.); +#149917 = VERTEX_POINT('',#149918); +#149918 = CARTESIAN_POINT('',(125.282616,-110.397307,1.585)); +#149919 = LINE('',#149920,#149921); +#149920 = CARTESIAN_POINT('',(125.299732,-110.362551,1.585)); +#149921 = VECTOR('',#149922,1.); +#149922 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#149923 = ORIENTED_EDGE('',*,*,#149924,.T.); +#149924 = EDGE_CURVE('',#149917,#149925,#149927,.T.); +#149925 = VERTEX_POINT('',#149926); +#149926 = CARTESIAN_POINT('',(125.05572,-110.656616,1.585)); +#149927 = LINE('',#149928,#149929); +#149928 = CARTESIAN_POINT('',(125.282616,-110.397307,1.585)); +#149929 = VECTOR('',#149930,1.); +#149930 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#149931 = ORIENTED_EDGE('',*,*,#149932,.T.); +#149932 = EDGE_CURVE('',#149925,#149933,#149935,.T.); +#149933 = VERTEX_POINT('',#149934); +#149934 = CARTESIAN_POINT('',(125.299732,-110.904715,1.585)); +#149935 = CIRCLE('',#149936,0.348520834816); +#149936 = AXIS2_PLACEMENT_3D('',#149937,#149938,#149939); +#149937 = CARTESIAN_POINT('',(124.9624266174,-110.9924181993,1.585)); +#149938 = DIRECTION('',(0.,0.,-1.)); +#149939 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#149940 = ORIENTED_EDGE('',*,*,#149941,.T.); +#149941 = EDGE_CURVE('',#149933,#149942,#149944,.T.); +#149942 = VERTEX_POINT('',#149943); +#149943 = CARTESIAN_POINT('',(125.29851,-111.177252,1.585)); +#149944 = LINE('',#149945,#149946); +#149945 = CARTESIAN_POINT('',(125.299732,-110.904715,1.585)); +#149946 = VECTOR('',#149947,1.); +#149947 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#149948 = ORIENTED_EDGE('',*,*,#149949,.T.); +#149949 = EDGE_CURVE('',#149942,#149950,#149952,.T.); +#149950 = VERTEX_POINT('',#149951); +#149951 = CARTESIAN_POINT('',(125.050329,-111.421478,1.585)); +#149952 = CIRCLE('',#149953,0.348635327447); +#149953 = AXIS2_PLACEMENT_3D('',#149954,#149955,#149956); +#149954 = CARTESIAN_POINT('',(124.96255748129,-111.0840720841,1.585)); +#149955 = DIRECTION('',(0.,0.,-1.)); +#149956 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#149957 = ORIENTED_EDGE('',*,*,#149958,.T.); +#149958 = EDGE_CURVE('',#149950,#149959,#149961,.T.); +#149959 = VERTEX_POINT('',#149960); +#149960 = CARTESIAN_POINT('',(124.730173,-111.420256,1.585)); +#149961 = LINE('',#149962,#149963); +#149962 = CARTESIAN_POINT('',(125.050329,-111.421478,1.585)); +#149963 = VECTOR('',#149964,1.); +#149964 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#149965 = ORIENTED_EDGE('',*,*,#149966,.T.); +#149966 = EDGE_CURVE('',#149959,#149967,#149969,.T.); +#149967 = VERTEX_POINT('',#149968); +#149968 = CARTESIAN_POINT('',(124.60746,-111.35805,1.585)); +#149969 = LINE('',#149970,#149971); +#149970 = CARTESIAN_POINT('',(124.730173,-111.420256,1.585)); +#149971 = VECTOR('',#149972,1.); +#149972 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#149973 = ORIENTED_EDGE('',*,*,#149974,.T.); +#149974 = EDGE_CURVE('',#149967,#149975,#149977,.T.); +#149975 = VERTEX_POINT('',#149976); +#149976 = CARTESIAN_POINT('',(124.544765,-111.294347,1.585)); +#149977 = LINE('',#149978,#149979); +#149978 = CARTESIAN_POINT('',(124.60746,-111.35805,1.585)); +#149979 = VECTOR('',#149980,1.); +#149980 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#149981 = ORIENTED_EDGE('',*,*,#149982,.T.); +#149982 = EDGE_CURVE('',#149975,#149983,#149985,.T.); +#149983 = VERTEX_POINT('',#149984); +#149984 = CARTESIAN_POINT('',(124.66016,-111.199648,1.585)); +#149985 = CIRCLE('',#149986,7.50001266804E-02); +#149986 = AXIS2_PLACEMENT_3D('',#149987,#149988,#149989); +#149987 = CARTESIAN_POINT('',(124.60712605199,-111.2526802483,1.585)); +#149988 = DIRECTION('',(0.,0.,-1.)); +#149989 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#149990 = ORIENTED_EDGE('',*,*,#149991,.T.); +#149991 = EDGE_CURVE('',#149983,#149992,#149994,.T.); +#149992 = VERTEX_POINT('',#149993); +#149993 = CARTESIAN_POINT('',(124.699172,-111.238661,1.585)); +#149994 = LINE('',#149995,#149996); +#149995 = CARTESIAN_POINT('',(124.66016,-111.199648,1.585)); +#149996 = VECTOR('',#149997,1.); +#149997 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#149998 = ORIENTED_EDGE('',*,*,#149999,.T.); +#149999 = EDGE_CURVE('',#149992,#150000,#150002,.T.); +#150000 = VERTEX_POINT('',#150001); +#150001 = CARTESIAN_POINT('',(125.086507,-111.238661,1.585)); +#150002 = CIRCLE('',#150003,0.358502380266); +#150003 = AXIS2_PLACEMENT_3D('',#150004,#150005,#150006); +#150004 = CARTESIAN_POINT('',(124.8928395,-110.936971,1.585)); +#150005 = DIRECTION('',(0.,0.,1.)); +#150006 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#150007 = ORIENTED_EDGE('',*,*,#150008,.T.); +#150008 = EDGE_CURVE('',#150000,#150009,#150011,.T.); +#150009 = VERTEX_POINT('',#150010); +#150010 = CARTESIAN_POINT('',(125.116914,-111.208253,1.585)); +#150011 = LINE('',#150012,#150013); +#150012 = CARTESIAN_POINT('',(125.086507,-111.238661,1.585)); +#150013 = VECTOR('',#150014,1.); +#150014 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150015 = ORIENTED_EDGE('',*,*,#150016,.T.); +#150016 = EDGE_CURVE('',#150009,#150017,#150019,.T.); +#150017 = VERTEX_POINT('',#150018); +#150018 = CARTESIAN_POINT('',(125.116915,-110.868536,1.585)); +#150019 = CIRCLE('',#150020,0.305616146029); +#150020 = AXIS2_PLACEMENT_3D('',#150021,#150022,#150023); +#150021 = CARTESIAN_POINT('',(124.86284892049,-111.0383937521,1.585)); +#150022 = DIRECTION('',(0.,-0.,1.)); +#150023 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#150024 = ORIENTED_EDGE('',*,*,#150025,.T.); +#150025 = EDGE_CURVE('',#150017,#150026,#150028,.T.); +#150026 = VERTEX_POINT('',#150027); +#150027 = CARTESIAN_POINT('',(125.086508,-110.838129,1.585)); +#150028 = LINE('',#150029,#150030); +#150029 = CARTESIAN_POINT('',(125.116915,-110.868536,1.585)); +#150030 = VECTOR('',#150031,1.); +#150031 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#150032 = ORIENTED_EDGE('',*,*,#150033,.T.); +#150033 = EDGE_CURVE('',#150026,#150034,#150036,.T.); +#150034 = VERTEX_POINT('',#150035); +#150035 = CARTESIAN_POINT('',(125.017992,-110.803871,1.585)); +#150036 = LINE('',#150037,#150038); +#150037 = CARTESIAN_POINT('',(125.086508,-110.838129,1.585)); +#150038 = VECTOR('',#150039,1.); +#150039 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150040 = ORIENTED_EDGE('',*,*,#150041,.T.); +#150041 = EDGE_CURVE('',#150034,#150042,#150044,.T.); +#150042 = VERTEX_POINT('',#150043); +#150043 = CARTESIAN_POINT('',(124.878208,-110.80243,1.585)); +#150044 = LINE('',#150045,#150046); +#150045 = CARTESIAN_POINT('',(125.017992,-110.803871,1.585)); +#150046 = VECTOR('',#150047,1.); +#150047 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#150048 = ORIENTED_EDGE('',*,*,#150049,.T.); +#150049 = EDGE_CURVE('',#150042,#150050,#150052,.T.); +#150050 = VERTEX_POINT('',#150051); +#150051 = CARTESIAN_POINT('',(124.836397,-110.679483,1.585)); +#150052 = CIRCLE('',#150053,7.500015628755E-02); +#150053 = AXIS2_PLACEMENT_3D('',#150054,#150055,#150056); +#150054 = CARTESIAN_POINT('',(124.89284028432,-110.7288710461,1.585)); +#150055 = DIRECTION('',(0.,0.,-1.)); +#150056 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#150057 = ORIENTED_EDGE('',*,*,#150058,.T.); +#150058 = EDGE_CURVE('',#150050,#150059,#150061,.T.); +#150059 = VERTEX_POINT('',#150060); +#150060 = CARTESIAN_POINT('',(125.060891,-110.422919,1.585)); +#150061 = LINE('',#150062,#150063); +#150062 = CARTESIAN_POINT('',(124.836397,-110.679483,1.585)); +#150063 = VECTOR('',#150064,1.); +#150064 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#150065 = ORIENTED_EDGE('',*,*,#150066,.T.); +#150066 = EDGE_CURVE('',#150059,#149889,#150067,.T.); +#150067 = LINE('',#150068,#150069); +#150068 = CARTESIAN_POINT('',(125.060891,-110.422919,1.585)); +#150069 = VECTOR('',#150070,1.); +#150070 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#150071 = PLANE('',#150072); +#150072 = AXIS2_PLACEMENT_3D('',#150073,#150074,#150075); +#150073 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150074 = DIRECTION('',(0.,0.,1.)); +#150075 = DIRECTION('',(1.,0.,-0.)); +#150076 = SHELL_BASED_SURFACE_MODEL('',(#150077)); +#150077 = OPEN_SHELL('',(#150078)); +#150078 = ADVANCED_FACE('',(#150079,#150181),#150283,.T.); +#150079 = FACE_BOUND('',#150080,.F.); +#150080 = EDGE_LOOP('',(#150081,#150092,#150100,#150108,#150117,#150125, + #150133,#150142,#150150,#150158,#150167,#150175)); +#150081 = ORIENTED_EDGE('',*,*,#150082,.T.); +#150082 = EDGE_CURVE('',#150083,#150085,#150087,.T.); +#150083 = VERTEX_POINT('',#150084); +#150084 = CARTESIAN_POINT('',(125.710142,-110.33242,1.585)); +#150085 = VERTEX_POINT('',#150086); +#150086 = CARTESIAN_POINT('',(126.08298,-110.337786,1.585)); +#150087 = CIRCLE('',#150088,0.291788488016); +#150088 = AXIS2_PLACEMENT_3D('',#150089,#150090,#150091); +#150089 = CARTESIAN_POINT('',(125.89333086911,-110.5595375025,1.585)); +#150090 = DIRECTION('',(0.,0.,-1.)); +#150091 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#150092 = ORIENTED_EDGE('',*,*,#150093,.T.); +#150093 = EDGE_CURVE('',#150085,#150094,#150096,.T.); +#150094 = VERTEX_POINT('',#150095); +#150095 = CARTESIAN_POINT('',(126.146433,-110.403316,1.585)); +#150096 = LINE('',#150097,#150098); +#150097 = CARTESIAN_POINT('',(126.08298,-110.337786,1.585)); +#150098 = VECTOR('',#150099,1.); +#150099 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#150100 = ORIENTED_EDGE('',*,*,#150101,.T.); +#150101 = EDGE_CURVE('',#150094,#150102,#150104,.T.); +#150102 = VERTEX_POINT('',#150103); +#150103 = CARTESIAN_POINT('',(126.203696,-110.520205,1.585)); +#150104 = LINE('',#150105,#150106); +#150105 = CARTESIAN_POINT('',(126.146433,-110.403316,1.585)); +#150106 = VECTOR('',#150107,1.); +#150107 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#150108 = ORIENTED_EDGE('',*,*,#150109,.T.); +#150109 = EDGE_CURVE('',#150102,#150110,#150112,.T.); +#150110 = VERTEX_POINT('',#150111); +#150111 = CARTESIAN_POINT('',(126.198017,-111.190983,1.585)); +#150112 = CIRCLE('',#150113,0.967158496826); +#150113 = AXIS2_PLACEMENT_3D('',#150114,#150115,#150116); +#150114 = CARTESIAN_POINT('',(125.29374970686,-110.8479141722,1.585)); +#150115 = DIRECTION('',(0.,0.,-1.)); +#150116 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#150117 = ORIENTED_EDGE('',*,*,#150118,.T.); +#150118 = EDGE_CURVE('',#150110,#150119,#150121,.T.); +#150119 = VERTEX_POINT('',#150120); +#150120 = CARTESIAN_POINT('',(126.141067,-111.299963,1.585)); +#150121 = LINE('',#150122,#150123); +#150122 = CARTESIAN_POINT('',(126.198017,-111.190983,1.585)); +#150123 = VECTOR('',#150124,1.); +#150124 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#150125 = ORIENTED_EDGE('',*,*,#150126,.T.); +#150126 = EDGE_CURVE('',#150119,#150127,#150129,.T.); +#150127 = VERTEX_POINT('',#150128); +#150128 = CARTESIAN_POINT('',(126.075537,-111.363417,1.585)); +#150129 = LINE('',#150130,#150131); +#150130 = CARTESIAN_POINT('',(126.141067,-111.299963,1.585)); +#150131 = VECTOR('',#150132,1.); +#150132 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#150133 = ORIENTED_EDGE('',*,*,#150134,.T.); +#150134 = EDGE_CURVE('',#150127,#150135,#150137,.T.); +#150135 = VERTEX_POINT('',#150136); +#150136 = CARTESIAN_POINT('',(125.702698,-111.35805,1.585)); +#150137 = CIRCLE('',#150138,0.290998264264); +#150138 = AXIS2_PLACEMENT_3D('',#150139,#150140,#150141); +#150139 = CARTESIAN_POINT('',(125.89233341815,-111.1373275544,1.585)); +#150140 = DIRECTION('',(-0.,0.,-1.)); +#150141 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#150142 = ORIENTED_EDGE('',*,*,#150143,.T.); +#150143 = EDGE_CURVE('',#150135,#150144,#150146,.T.); +#150144 = VERTEX_POINT('',#150145); +#150145 = CARTESIAN_POINT('',(125.639245,-111.292517,1.585)); +#150146 = LINE('',#150147,#150148); +#150147 = CARTESIAN_POINT('',(125.702698,-111.35805,1.585)); +#150148 = VECTOR('',#150149,1.); +#150149 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#150150 = ORIENTED_EDGE('',*,*,#150151,.T.); +#150151 = EDGE_CURVE('',#150144,#150152,#150154,.T.); +#150152 = VERTEX_POINT('',#150153); +#150153 = CARTESIAN_POINT('',(125.581984,-111.175632,1.585)); +#150154 = LINE('',#150155,#150156); +#150155 = CARTESIAN_POINT('',(125.639245,-111.292517,1.585)); +#150156 = VECTOR('',#150157,1.); +#150157 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#150158 = ORIENTED_EDGE('',*,*,#150159,.T.); +#150159 = EDGE_CURVE('',#150152,#150160,#150162,.T.); +#150160 = VERTEX_POINT('',#150161); +#150161 = CARTESIAN_POINT('',(125.587663,-110.504854,1.585)); +#150162 = CIRCLE('',#150163,0.967158496826); +#150163 = AXIS2_PLACEMENT_3D('',#150164,#150165,#150166); +#150164 = CARTESIAN_POINT('',(126.49193029313,-110.8479228277,1.585)); +#150165 = DIRECTION('',(0.,0.,-1.)); +#150166 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#150167 = ORIENTED_EDGE('',*,*,#150168,.T.); +#150168 = EDGE_CURVE('',#150160,#150169,#150171,.T.); +#150169 = VERTEX_POINT('',#150170); +#150170 = CARTESIAN_POINT('',(125.644612,-110.395873,1.585)); +#150171 = LINE('',#150172,#150173); +#150172 = CARTESIAN_POINT('',(125.587663,-110.504854,1.585)); +#150173 = VECTOR('',#150174,1.); +#150174 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#150175 = ORIENTED_EDGE('',*,*,#150176,.T.); +#150176 = EDGE_CURVE('',#150169,#150083,#150177,.T.); +#150177 = LINE('',#150178,#150179); +#150178 = CARTESIAN_POINT('',(125.644612,-110.395873,1.585)); +#150179 = VECTOR('',#150180,1.); +#150180 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#150181 = FACE_BOUND('',#150182,.F.); +#150182 = EDGE_LOOP('',(#150183,#150194,#150202,#150210,#150219,#150227, + #150235,#150244,#150252,#150260,#150269,#150277)); +#150183 = ORIENTED_EDGE('',*,*,#150184,.T.); +#150184 = EDGE_CURVE('',#150185,#150187,#150189,.T.); +#150185 = VERTEX_POINT('',#150186); +#150186 = CARTESIAN_POINT('',(125.99127,-110.457177,1.585)); +#150187 = VERTEX_POINT('',#150188); +#150188 = CARTESIAN_POINT('',(125.79441,-110.457177,1.585)); +#150189 = CIRCLE('',#150190,0.148516804184); +#150190 = AXIS2_PLACEMENT_3D('',#150191,#150192,#150193); +#150191 = CARTESIAN_POINT('',(125.89284,-110.568392,1.585)); +#150192 = DIRECTION('',(0.,0.,1.)); +#150193 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#150194 = ORIENTED_EDGE('',*,*,#150195,.T.); +#150195 = EDGE_CURVE('',#150187,#150196,#150198,.T.); +#150196 = VERTEX_POINT('',#150197); +#150197 = CARTESIAN_POINT('',(125.764003,-110.487584,1.585)); +#150198 = LINE('',#150199,#150200); +#150199 = CARTESIAN_POINT('',(125.79441,-110.457177,1.585)); +#150200 = VECTOR('',#150201,1.); +#150201 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#150202 = ORIENTED_EDGE('',*,*,#150203,.T.); +#150203 = EDGE_CURVE('',#150196,#150204,#150206,.T.); +#150204 = VERTEX_POINT('',#150205); +#150205 = CARTESIAN_POINT('',(125.725509,-110.564571,1.585)); +#150206 = LINE('',#150207,#150208); +#150207 = CARTESIAN_POINT('',(125.764003,-110.487584,1.585)); +#150208 = VECTOR('',#150209,1.); +#150209 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#150210 = ORIENTED_EDGE('',*,*,#150211,.T.); +#150211 = EDGE_CURVE('',#150204,#150212,#150214,.T.); +#150212 = VERTEX_POINT('',#150213); +#150213 = CARTESIAN_POINT('',(125.725509,-111.131266,1.585)); +#150214 = CIRCLE('',#150215,0.815450468383); +#150215 = AXIS2_PLACEMENT_3D('',#150216,#150217,#150218); +#150216 = CARTESIAN_POINT('',(126.49014856255,-110.8479185,1.585)); +#150217 = DIRECTION('',(0.,0.,1.)); +#150218 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#150219 = ORIENTED_EDGE('',*,*,#150220,.T.); +#150220 = EDGE_CURVE('',#150212,#150221,#150223,.T.); +#150221 = VERTEX_POINT('',#150222); +#150222 = CARTESIAN_POINT('',(125.764003,-111.208253,1.585)); +#150223 = LINE('',#150224,#150225); +#150224 = CARTESIAN_POINT('',(125.725509,-111.131266,1.585)); +#150225 = VECTOR('',#150226,1.); +#150226 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#150227 = ORIENTED_EDGE('',*,*,#150228,.T.); +#150228 = EDGE_CURVE('',#150221,#150229,#150231,.T.); +#150229 = VERTEX_POINT('',#150230); +#150230 = CARTESIAN_POINT('',(125.79441,-111.238661,1.585)); +#150231 = LINE('',#150232,#150233); +#150232 = CARTESIAN_POINT('',(125.764003,-111.208253,1.585)); +#150233 = VECTOR('',#150234,1.); +#150234 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#150235 = ORIENTED_EDGE('',*,*,#150236,.T.); +#150236 = EDGE_CURVE('',#150229,#150237,#150239,.T.); +#150237 = VERTEX_POINT('',#150238); +#150238 = CARTESIAN_POINT('',(125.991269,-111.238661,1.585)); +#150239 = CIRCLE('',#150240,0.14851572397); +#150240 = AXIS2_PLACEMENT_3D('',#150241,#150242,#150243); +#150241 = CARTESIAN_POINT('',(125.8928395,-111.127447,1.585)); +#150242 = DIRECTION('',(0.,0.,1.)); +#150243 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#150244 = ORIENTED_EDGE('',*,*,#150245,.T.); +#150245 = EDGE_CURVE('',#150237,#150246,#150248,.T.); +#150246 = VERTEX_POINT('',#150247); +#150247 = CARTESIAN_POINT('',(126.021676,-111.208253,1.585)); +#150248 = LINE('',#150249,#150250); +#150249 = CARTESIAN_POINT('',(125.991269,-111.238661,1.585)); +#150250 = VECTOR('',#150251,1.); +#150251 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150252 = ORIENTED_EDGE('',*,*,#150253,.T.); +#150253 = EDGE_CURVE('',#150246,#150254,#150256,.T.); +#150254 = VERTEX_POINT('',#150255); +#150255 = CARTESIAN_POINT('',(126.06017,-111.131266,1.585)); +#150256 = LINE('',#150257,#150258); +#150257 = CARTESIAN_POINT('',(126.021676,-111.208253,1.585)); +#150258 = VECTOR('',#150259,1.); +#150259 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#150260 = ORIENTED_EDGE('',*,*,#150261,.T.); +#150261 = EDGE_CURVE('',#150254,#150262,#150264,.T.); +#150262 = VERTEX_POINT('',#150263); +#150263 = CARTESIAN_POINT('',(126.06017,-110.564571,1.585)); +#150264 = CIRCLE('',#150265,0.815433004022); +#150265 = AXIS2_PLACEMENT_3D('',#150266,#150267,#150268); +#150266 = CARTESIAN_POINT('',(125.29554906235,-110.8479185,1.585)); +#150267 = DIRECTION('',(0.,-0.,1.)); +#150268 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#150269 = ORIENTED_EDGE('',*,*,#150270,.T.); +#150270 = EDGE_CURVE('',#150262,#150271,#150273,.T.); +#150271 = VERTEX_POINT('',#150272); +#150272 = CARTESIAN_POINT('',(126.021677,-110.487584,1.585)); +#150273 = LINE('',#150274,#150275); +#150274 = CARTESIAN_POINT('',(126.06017,-110.564571,1.585)); +#150275 = VECTOR('',#150276,1.); +#150276 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#150277 = ORIENTED_EDGE('',*,*,#150278,.T.); +#150278 = EDGE_CURVE('',#150271,#150185,#150279,.T.); +#150279 = LINE('',#150280,#150281); +#150280 = CARTESIAN_POINT('',(126.021677,-110.487584,1.585)); +#150281 = VECTOR('',#150282,1.); +#150282 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#150283 = PLANE('',#150284); +#150284 = AXIS2_PLACEMENT_3D('',#150285,#150286,#150287); +#150285 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150286 = DIRECTION('',(0.,0.,1.)); +#150287 = DIRECTION('',(1.,0.,-0.)); +#150288 = SHELL_BASED_SURFACE_MODEL('',(#150289)); +#150289 = OPEN_SHELL('',(#150290)); +#150290 = ADVANCED_FACE('',(#150291),#150477,.T.); +#150291 = FACE_BOUND('',#150292,.F.); +#150292 = EDGE_LOOP('',(#150293,#150304,#150312,#150321,#150329,#150337, + #150346,#150354,#150363,#150371,#150379,#150387,#150396,#150404, + #150413,#150421,#150430,#150438,#150446,#150454,#150463,#150471)); +#150293 = ORIENTED_EDGE('',*,*,#150294,.T.); +#150294 = EDGE_CURVE('',#150295,#150297,#150299,.T.); +#150295 = VERTEX_POINT('',#150296); +#150296 = CARTESIAN_POINT('',(128.592494,-110.421478,1.585)); +#150297 = VERTEX_POINT('',#150298); +#150298 = CARTESIAN_POINT('',(128.607126,-110.272919,1.585)); +#150299 = CIRCLE('',#150300,7.500006711464E-02); +#150300 = AXIS2_PLACEMENT_3D('',#150301,#150302,#150303); +#150301 = CARTESIAN_POINT('',(128.60712593288,-110.3479190671,1.585)); +#150302 = DIRECTION('',(0.,0.,-1.)); +#150303 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#150304 = ORIENTED_EDGE('',*,*,#150305,.T.); +#150305 = EDGE_CURVE('',#150297,#150306,#150308,.T.); +#150306 = VERTEX_POINT('',#150307); +#150307 = CARTESIAN_POINT('',(129.233911,-110.273681,1.585)); +#150308 = LINE('',#150309,#150310); +#150309 = CARTESIAN_POINT('',(128.607126,-110.272919,1.585)); +#150310 = VECTOR('',#150311,1.); +#150311 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#150312 = ORIENTED_EDGE('',*,*,#150313,.T.); +#150313 = EDGE_CURVE('',#150306,#150314,#150316,.T.); +#150314 = VERTEX_POINT('',#150315); +#150315 = CARTESIAN_POINT('',(129.299732,-110.362551,1.585)); +#150316 = CIRCLE('',#150317,7.447391611626E-02); +#150317 = AXIS2_PLACEMENT_3D('',#150318,#150319,#150320); +#150318 = CARTESIAN_POINT('',(129.22673192664,-110.3478080874,1.585)); +#150319 = DIRECTION('',(0.,0.,-1.)); +#150320 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#150321 = ORIENTED_EDGE('',*,*,#150322,.T.); +#150322 = EDGE_CURVE('',#150314,#150323,#150325,.T.); +#150323 = VERTEX_POINT('',#150324); +#150324 = CARTESIAN_POINT('',(129.282616,-110.397307,1.585)); +#150325 = LINE('',#150326,#150327); +#150326 = CARTESIAN_POINT('',(129.299732,-110.362551,1.585)); +#150327 = VECTOR('',#150328,1.); +#150328 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#150329 = ORIENTED_EDGE('',*,*,#150330,.T.); +#150330 = EDGE_CURVE('',#150323,#150331,#150333,.T.); +#150331 = VERTEX_POINT('',#150332); +#150332 = CARTESIAN_POINT('',(129.05572,-110.656616,1.585)); +#150333 = LINE('',#150334,#150335); +#150334 = CARTESIAN_POINT('',(129.282616,-110.397307,1.585)); +#150335 = VECTOR('',#150336,1.); +#150336 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#150337 = ORIENTED_EDGE('',*,*,#150338,.T.); +#150338 = EDGE_CURVE('',#150331,#150339,#150341,.T.); +#150339 = VERTEX_POINT('',#150340); +#150340 = CARTESIAN_POINT('',(129.299732,-110.904715,1.585)); +#150341 = CIRCLE('',#150342,0.348520834816); +#150342 = AXIS2_PLACEMENT_3D('',#150343,#150344,#150345); +#150343 = CARTESIAN_POINT('',(128.9624266174,-110.9924181993,1.585)); +#150344 = DIRECTION('',(0.,0.,-1.)); +#150345 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#150346 = ORIENTED_EDGE('',*,*,#150347,.T.); +#150347 = EDGE_CURVE('',#150339,#150348,#150350,.T.); +#150348 = VERTEX_POINT('',#150349); +#150349 = CARTESIAN_POINT('',(129.29851,-111.177252,1.585)); +#150350 = LINE('',#150351,#150352); +#150351 = CARTESIAN_POINT('',(129.299732,-110.904715,1.585)); +#150352 = VECTOR('',#150353,1.); +#150353 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#150354 = ORIENTED_EDGE('',*,*,#150355,.T.); +#150355 = EDGE_CURVE('',#150348,#150356,#150358,.T.); +#150356 = VERTEX_POINT('',#150357); +#150357 = CARTESIAN_POINT('',(129.050329,-111.421478,1.585)); +#150358 = CIRCLE('',#150359,0.348635327447); +#150359 = AXIS2_PLACEMENT_3D('',#150360,#150361,#150362); +#150360 = CARTESIAN_POINT('',(128.96255748129,-111.0840720841,1.585)); +#150361 = DIRECTION('',(0.,0.,-1.)); +#150362 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#150363 = ORIENTED_EDGE('',*,*,#150364,.T.); +#150364 = EDGE_CURVE('',#150356,#150365,#150367,.T.); +#150365 = VERTEX_POINT('',#150366); +#150366 = CARTESIAN_POINT('',(128.730173,-111.420256,1.585)); +#150367 = LINE('',#150368,#150369); +#150368 = CARTESIAN_POINT('',(129.050329,-111.421478,1.585)); +#150369 = VECTOR('',#150370,1.); +#150370 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#150371 = ORIENTED_EDGE('',*,*,#150372,.T.); +#150372 = EDGE_CURVE('',#150365,#150373,#150375,.T.); +#150373 = VERTEX_POINT('',#150374); +#150374 = CARTESIAN_POINT('',(128.60746,-111.35805,1.585)); +#150375 = LINE('',#150376,#150377); +#150376 = CARTESIAN_POINT('',(128.730173,-111.420256,1.585)); +#150377 = VECTOR('',#150378,1.); +#150378 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#150379 = ORIENTED_EDGE('',*,*,#150380,.T.); +#150380 = EDGE_CURVE('',#150373,#150381,#150383,.T.); +#150381 = VERTEX_POINT('',#150382); +#150382 = CARTESIAN_POINT('',(128.544765,-111.294347,1.585)); +#150383 = LINE('',#150384,#150385); +#150384 = CARTESIAN_POINT('',(128.60746,-111.35805,1.585)); +#150385 = VECTOR('',#150386,1.); +#150386 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#150387 = ORIENTED_EDGE('',*,*,#150388,.T.); +#150388 = EDGE_CURVE('',#150381,#150389,#150391,.T.); +#150389 = VERTEX_POINT('',#150390); +#150390 = CARTESIAN_POINT('',(128.66016,-111.199648,1.585)); +#150391 = CIRCLE('',#150392,7.500012668039E-02); +#150392 = AXIS2_PLACEMENT_3D('',#150393,#150394,#150395); +#150393 = CARTESIAN_POINT('',(128.60712605199,-111.2526802483,1.585)); +#150394 = DIRECTION('',(0.,0.,-1.)); +#150395 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#150396 = ORIENTED_EDGE('',*,*,#150397,.T.); +#150397 = EDGE_CURVE('',#150389,#150398,#150400,.T.); +#150398 = VERTEX_POINT('',#150399); +#150399 = CARTESIAN_POINT('',(128.699172,-111.238661,1.585)); +#150400 = LINE('',#150401,#150402); +#150401 = CARTESIAN_POINT('',(128.66016,-111.199648,1.585)); +#150402 = VECTOR('',#150403,1.); +#150403 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#150404 = ORIENTED_EDGE('',*,*,#150405,.T.); +#150405 = EDGE_CURVE('',#150398,#150406,#150408,.T.); +#150406 = VERTEX_POINT('',#150407); +#150407 = CARTESIAN_POINT('',(129.086507,-111.238661,1.585)); +#150408 = CIRCLE('',#150409,0.358502380266); +#150409 = AXIS2_PLACEMENT_3D('',#150410,#150411,#150412); +#150410 = CARTESIAN_POINT('',(128.8928395,-110.936971,1.585)); +#150411 = DIRECTION('',(0.,0.,1.)); +#150412 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#150413 = ORIENTED_EDGE('',*,*,#150414,.T.); +#150414 = EDGE_CURVE('',#150406,#150415,#150417,.T.); +#150415 = VERTEX_POINT('',#150416); +#150416 = CARTESIAN_POINT('',(129.116914,-111.208253,1.585)); +#150417 = LINE('',#150418,#150419); +#150418 = CARTESIAN_POINT('',(129.086507,-111.238661,1.585)); +#150419 = VECTOR('',#150420,1.); +#150420 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150421 = ORIENTED_EDGE('',*,*,#150422,.T.); +#150422 = EDGE_CURVE('',#150415,#150423,#150425,.T.); +#150423 = VERTEX_POINT('',#150424); +#150424 = CARTESIAN_POINT('',(129.116915,-110.868536,1.585)); +#150425 = CIRCLE('',#150426,0.305616146029); +#150426 = AXIS2_PLACEMENT_3D('',#150427,#150428,#150429); +#150427 = CARTESIAN_POINT('',(128.86284892049,-111.0383937521,1.585)); +#150428 = DIRECTION('',(0.,-0.,1.)); +#150429 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#150430 = ORIENTED_EDGE('',*,*,#150431,.T.); +#150431 = EDGE_CURVE('',#150423,#150432,#150434,.T.); +#150432 = VERTEX_POINT('',#150433); +#150433 = CARTESIAN_POINT('',(129.086508,-110.838129,1.585)); +#150434 = LINE('',#150435,#150436); +#150435 = CARTESIAN_POINT('',(129.116915,-110.868536,1.585)); +#150436 = VECTOR('',#150437,1.); +#150437 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#150438 = ORIENTED_EDGE('',*,*,#150439,.T.); +#150439 = EDGE_CURVE('',#150432,#150440,#150442,.T.); +#150440 = VERTEX_POINT('',#150441); +#150441 = CARTESIAN_POINT('',(129.017992,-110.803871,1.585)); +#150442 = LINE('',#150443,#150444); +#150443 = CARTESIAN_POINT('',(129.086508,-110.838129,1.585)); +#150444 = VECTOR('',#150445,1.); +#150445 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150446 = ORIENTED_EDGE('',*,*,#150447,.T.); +#150447 = EDGE_CURVE('',#150440,#150448,#150450,.T.); +#150448 = VERTEX_POINT('',#150449); +#150449 = CARTESIAN_POINT('',(128.878208,-110.80243,1.585)); +#150450 = LINE('',#150451,#150452); +#150451 = CARTESIAN_POINT('',(129.017992,-110.803871,1.585)); +#150452 = VECTOR('',#150453,1.); +#150453 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#150454 = ORIENTED_EDGE('',*,*,#150455,.T.); +#150455 = EDGE_CURVE('',#150448,#150456,#150458,.T.); +#150456 = VERTEX_POINT('',#150457); +#150457 = CARTESIAN_POINT('',(128.836397,-110.679483,1.585)); +#150458 = CIRCLE('',#150459,7.500015628756E-02); +#150459 = AXIS2_PLACEMENT_3D('',#150460,#150461,#150462); +#150460 = CARTESIAN_POINT('',(128.89284028432,-110.7288710461,1.585)); +#150461 = DIRECTION('',(0.,0.,-1.)); +#150462 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#150463 = ORIENTED_EDGE('',*,*,#150464,.T.); +#150464 = EDGE_CURVE('',#150456,#150465,#150467,.T.); +#150465 = VERTEX_POINT('',#150466); +#150466 = CARTESIAN_POINT('',(129.060891,-110.422919,1.585)); +#150467 = LINE('',#150468,#150469); +#150468 = CARTESIAN_POINT('',(128.836397,-110.679483,1.585)); +#150469 = VECTOR('',#150470,1.); +#150470 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#150471 = ORIENTED_EDGE('',*,*,#150472,.T.); +#150472 = EDGE_CURVE('',#150465,#150295,#150473,.T.); +#150473 = LINE('',#150474,#150475); +#150474 = CARTESIAN_POINT('',(129.060891,-110.422919,1.585)); +#150475 = VECTOR('',#150476,1.); +#150476 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#150477 = PLANE('',#150478); +#150478 = AXIS2_PLACEMENT_3D('',#150479,#150480,#150481); +#150479 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150480 = DIRECTION('',(0.,0.,1.)); +#150481 = DIRECTION('',(1.,0.,-0.)); +#150482 = SHELL_BASED_SURFACE_MODEL('',(#150483)); +#150483 = OPEN_SHELL('',(#150484)); +#150484 = ADVANCED_FACE('',(#150485),#150627,.T.); +#150485 = FACE_BOUND('',#150486,.F.); +#150486 = EDGE_LOOP('',(#150487,#150498,#150506,#150514,#150522,#150530, + #150538,#150546,#150554,#150563,#150571,#150580,#150588,#150596, + #150604,#150612,#150621)); +#150487 = ORIENTED_EDGE('',*,*,#150488,.T.); +#150488 = EDGE_CURVE('',#150489,#150491,#150493,.T.); +#150489 = VERTEX_POINT('',#150490); +#150490 = CARTESIAN_POINT('',(132.684506,-110.618892,1.585)); +#150491 = VERTEX_POINT('',#150492); +#150492 = CARTESIAN_POINT('',(132.801174,-110.681252,1.585)); +#150493 = CIRCLE('',#150494,7.500000000002E-02); +#150494 = AXIS2_PLACEMENT_3D('',#150495,#150496,#150497); +#150495 = CARTESIAN_POINT('',(132.726174,-110.6812520655,1.585)); +#150496 = DIRECTION('',(0.,0.,-1.)); +#150497 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#150498 = ORIENTED_EDGE('',*,*,#150499,.T.); +#150499 = EDGE_CURVE('',#150491,#150500,#150502,.T.); +#150500 = VERTEX_POINT('',#150501); +#150501 = CARTESIAN_POINT('',(132.801174,-111.187356,1.585)); +#150502 = LINE('',#150503,#150504); +#150503 = CARTESIAN_POINT('',(132.801174,-110.681252,1.585)); +#150504 = VECTOR('',#150505,1.); +#150505 = DIRECTION('',(0.,-1.,0.)); +#150506 = ORIENTED_EDGE('',*,*,#150507,.T.); +#150507 = EDGE_CURVE('',#150500,#150508,#150510,.T.); +#150508 = VERTEX_POINT('',#150509); +#150509 = CARTESIAN_POINT('',(132.829694,-111.244398,1.585)); +#150510 = LINE('',#150511,#150512); +#150511 = CARTESIAN_POINT('',(132.801174,-111.187356,1.585)); +#150512 = VECTOR('',#150513,1.); +#150513 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#150514 = ORIENTED_EDGE('',*,*,#150515,.T.); +#150515 = EDGE_CURVE('',#150508,#150516,#150518,.T.); +#150516 = VERTEX_POINT('',#150517); +#150517 = CARTESIAN_POINT('',(132.886736,-111.272919,1.585)); +#150518 = LINE('',#150519,#150520); +#150519 = CARTESIAN_POINT('',(132.829694,-111.244398,1.585)); +#150520 = VECTOR('',#150521,1.); +#150521 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#150522 = ORIENTED_EDGE('',*,*,#150523,.T.); +#150523 = EDGE_CURVE('',#150516,#150524,#150526,.T.); +#150524 = VERTEX_POINT('',#150525); +#150525 = CARTESIAN_POINT('',(132.994183,-111.272919,1.585)); +#150526 = LINE('',#150527,#150528); +#150527 = CARTESIAN_POINT('',(132.886736,-111.272919,1.585)); +#150528 = VECTOR('',#150529,1.); +#150529 = DIRECTION('',(1.,0.,0.)); +#150530 = ORIENTED_EDGE('',*,*,#150531,.T.); +#150531 = EDGE_CURVE('',#150524,#150532,#150534,.T.); +#150532 = VERTEX_POINT('',#150533); +#150533 = CARTESIAN_POINT('',(133.062698,-111.238661,1.585)); +#150534 = LINE('',#150535,#150536); +#150535 = CARTESIAN_POINT('',(132.994183,-111.272919,1.585)); +#150536 = VECTOR('',#150537,1.); +#150537 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#150538 = ORIENTED_EDGE('',*,*,#150539,.T.); +#150539 = EDGE_CURVE('',#150532,#150540,#150542,.T.); +#150540 = VERTEX_POINT('',#150541); +#150541 = CARTESIAN_POINT('',(133.079745,-111.221614,1.585)); +#150542 = LINE('',#150543,#150544); +#150543 = CARTESIAN_POINT('',(133.062698,-111.238661,1.585)); +#150544 = VECTOR('',#150545,1.); +#150545 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150546 = ORIENTED_EDGE('',*,*,#150547,.T.); +#150547 = EDGE_CURVE('',#150540,#150548,#150550,.T.); +#150548 = VERTEX_POINT('',#150549); +#150549 = CARTESIAN_POINT('',(133.081186,-110.66662,1.585)); +#150550 = LINE('',#150551,#150552); +#150551 = CARTESIAN_POINT('',(133.079745,-111.221614,1.585)); +#150552 = VECTOR('',#150553,1.); +#150553 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#150554 = ORIENTED_EDGE('',*,*,#150555,.T.); +#150555 = EDGE_CURVE('',#150548,#150556,#150558,.T.); +#150556 = VERTEX_POINT('',#150557); +#150557 = CARTESIAN_POINT('',(133.229745,-110.681252,1.585)); +#150558 = CIRCLE('',#150559,7.500006711464E-02); +#150559 = AXIS2_PLACEMENT_3D('',#150560,#150561,#150562); +#150560 = CARTESIAN_POINT('',(133.15474493288,-110.6812519328,1.585)); +#150561 = DIRECTION('',(0.,0.,-1.)); +#150562 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#150563 = ORIENTED_EDGE('',*,*,#150564,.T.); +#150564 = EDGE_CURVE('',#150556,#150565,#150567,.T.); +#150565 = VERTEX_POINT('',#150566); +#150566 = CARTESIAN_POINT('',(133.228304,-111.362551,1.585)); +#150567 = LINE('',#150568,#150569); +#150568 = CARTESIAN_POINT('',(133.229745,-110.681252,1.585)); +#150569 = VECTOR('',#150570,1.); +#150570 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#150571 = ORIENTED_EDGE('',*,*,#150572,.T.); +#150572 = EDGE_CURVE('',#150565,#150573,#150575,.T.); +#150573 = VERTEX_POINT('',#150574); +#150574 = CARTESIAN_POINT('',(133.093675,-111.390877,1.585)); +#150575 = CIRCLE('',#150576,7.47233536147E-02); +#150576 = AXIS2_PLACEMENT_3D('',#150577,#150578,#150579); +#150577 = CARTESIAN_POINT('',(133.15498058714,-111.3481545871,1.585)); +#150578 = DIRECTION('',(-0.,0.,-1.)); +#150579 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#150580 = ORIENTED_EDGE('',*,*,#150581,.T.); +#150581 = EDGE_CURVE('',#150573,#150582,#150584,.T.); +#150582 = VERTEX_POINT('',#150583); +#150583 = CARTESIAN_POINT('',(133.02652,-111.421478,1.585)); +#150584 = LINE('',#150585,#150586); +#150585 = CARTESIAN_POINT('',(133.093675,-111.390877,1.585)); +#150586 = VECTOR('',#150587,1.); +#150587 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#150588 = ORIENTED_EDGE('',*,*,#150589,.T.); +#150589 = EDGE_CURVE('',#150582,#150590,#150592,.T.); +#150590 = VERTEX_POINT('',#150591); +#150591 = CARTESIAN_POINT('',(132.849221,-111.420256,1.585)); +#150592 = LINE('',#150593,#150594); +#150593 = CARTESIAN_POINT('',(133.02652,-111.421478,1.585)); +#150594 = VECTOR('',#150595,1.); +#150595 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#150596 = ORIENTED_EDGE('',*,*,#150597,.T.); +#150597 = EDGE_CURVE('',#150590,#150598,#150600,.T.); +#150598 = VERTEX_POINT('',#150599); +#150599 = CARTESIAN_POINT('',(132.727809,-111.35955,1.585)); +#150600 = LINE('',#150601,#150602); +#150601 = CARTESIAN_POINT('',(132.849221,-111.420256,1.585)); +#150602 = VECTOR('',#150603,1.); +#150603 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150604 = ORIENTED_EDGE('',*,*,#150605,.T.); +#150605 = EDGE_CURVE('',#150598,#150606,#150608,.T.); +#150606 = VERTEX_POINT('',#150607); +#150607 = CARTESIAN_POINT('',(132.706711,-111.333841,1.585)); +#150608 = LINE('',#150609,#150610); +#150609 = CARTESIAN_POINT('',(132.727809,-111.35955,1.585)); +#150610 = VECTOR('',#150611,1.); +#150611 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#150612 = ORIENTED_EDGE('',*,*,#150613,.T.); +#150613 = EDGE_CURVE('',#150606,#150614,#150616,.T.); +#150614 = VERTEX_POINT('',#150615); +#150615 = CARTESIAN_POINT('',(132.663814,-110.639584,1.585)); +#150616 = CIRCLE('',#150617,0.780471555046); +#150617 = AXIS2_PLACEMENT_3D('',#150618,#150619,#150620); +#150618 = CARTESIAN_POINT('',(133.38262964714,-110.9436233291,1.585)); +#150619 = DIRECTION('',(0.,0.,-1.)); +#150620 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#150621 = ORIENTED_EDGE('',*,*,#150622,.T.); +#150622 = EDGE_CURVE('',#150614,#150489,#150623,.T.); +#150623 = LINE('',#150624,#150625); +#150624 = CARTESIAN_POINT('',(132.663814,-110.639584,1.585)); +#150625 = VECTOR('',#150626,1.); +#150626 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150627 = PLANE('',#150628); +#150628 = AXIS2_PLACEMENT_3D('',#150629,#150630,#150631); +#150629 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150630 = DIRECTION('',(0.,0.,1.)); +#150631 = DIRECTION('',(1.,0.,-0.)); +#150632 = SHELL_BASED_SURFACE_MODEL('',(#150633)); +#150633 = OPEN_SHELL('',(#150634)); +#150634 = ADVANCED_FACE('',(#150635),#150821,.T.); +#150635 = FACE_BOUND('',#150636,.F.); +#150636 = EDGE_LOOP('',(#150637,#150648,#150656,#150665,#150673,#150681, + #150690,#150698,#150707,#150715,#150723,#150731,#150740,#150748, + #150757,#150765,#150774,#150782,#150790,#150798,#150807,#150815)); +#150637 = ORIENTED_EDGE('',*,*,#150638,.T.); +#150638 = EDGE_CURVE('',#150639,#150641,#150643,.T.); +#150639 = VERTEX_POINT('',#150640); +#150640 = CARTESIAN_POINT('',(133.521066,-110.421478,1.585)); +#150641 = VERTEX_POINT('',#150642); +#150642 = CARTESIAN_POINT('',(133.535698,-110.272919,1.585)); +#150643 = CIRCLE('',#150644,7.500006711464E-02); +#150644 = AXIS2_PLACEMENT_3D('',#150645,#150646,#150647); +#150645 = CARTESIAN_POINT('',(133.53569793288,-110.3479190671,1.585)); +#150646 = DIRECTION('',(0.,0.,-1.)); +#150647 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#150648 = ORIENTED_EDGE('',*,*,#150649,.T.); +#150649 = EDGE_CURVE('',#150641,#150650,#150652,.T.); +#150650 = VERTEX_POINT('',#150651); +#150651 = CARTESIAN_POINT('',(134.162483,-110.273681,1.585)); +#150652 = LINE('',#150653,#150654); +#150653 = CARTESIAN_POINT('',(133.535698,-110.272919,1.585)); +#150654 = VECTOR('',#150655,1.); +#150655 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#150656 = ORIENTED_EDGE('',*,*,#150657,.T.); +#150657 = EDGE_CURVE('',#150650,#150658,#150660,.T.); +#150658 = VERTEX_POINT('',#150659); +#150659 = CARTESIAN_POINT('',(134.228304,-110.362551,1.585)); +#150660 = CIRCLE('',#150661,7.447391611627E-02); +#150661 = AXIS2_PLACEMENT_3D('',#150662,#150663,#150664); +#150662 = CARTESIAN_POINT('',(134.15530392664,-110.3478080874,1.585)); +#150663 = DIRECTION('',(0.,0.,-1.)); +#150664 = DIRECTION('',(9.639715124812E-02,0.995342950561,0.)); +#150665 = ORIENTED_EDGE('',*,*,#150666,.T.); +#150666 = EDGE_CURVE('',#150658,#150667,#150669,.T.); +#150667 = VERTEX_POINT('',#150668); +#150668 = CARTESIAN_POINT('',(134.211188,-110.397307,1.585)); +#150669 = LINE('',#150670,#150671); +#150670 = CARTESIAN_POINT('',(134.228304,-110.362551,1.585)); +#150671 = VECTOR('',#150672,1.); +#150672 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#150673 = ORIENTED_EDGE('',*,*,#150674,.T.); +#150674 = EDGE_CURVE('',#150667,#150675,#150677,.T.); +#150675 = VERTEX_POINT('',#150676); +#150676 = CARTESIAN_POINT('',(133.984292,-110.656616,1.585)); +#150677 = LINE('',#150678,#150679); +#150678 = CARTESIAN_POINT('',(134.211188,-110.397307,1.585)); +#150679 = VECTOR('',#150680,1.); +#150680 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#150681 = ORIENTED_EDGE('',*,*,#150682,.T.); +#150682 = EDGE_CURVE('',#150675,#150683,#150685,.T.); +#150683 = VERTEX_POINT('',#150684); +#150684 = CARTESIAN_POINT('',(134.228304,-110.904715,1.585)); +#150685 = CIRCLE('',#150686,0.348520834816); +#150686 = AXIS2_PLACEMENT_3D('',#150687,#150688,#150689); +#150687 = CARTESIAN_POINT('',(133.8909986174,-110.9924181993,1.585)); +#150688 = DIRECTION('',(0.,0.,-1.)); +#150689 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#150690 = ORIENTED_EDGE('',*,*,#150691,.T.); +#150691 = EDGE_CURVE('',#150683,#150692,#150694,.T.); +#150692 = VERTEX_POINT('',#150693); +#150693 = CARTESIAN_POINT('',(134.227082,-111.177252,1.585)); +#150694 = LINE('',#150695,#150696); +#150695 = CARTESIAN_POINT('',(134.228304,-110.904715,1.585)); +#150696 = VECTOR('',#150697,1.); +#150697 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#150698 = ORIENTED_EDGE('',*,*,#150699,.T.); +#150699 = EDGE_CURVE('',#150692,#150700,#150702,.T.); +#150700 = VERTEX_POINT('',#150701); +#150701 = CARTESIAN_POINT('',(133.978901,-111.421478,1.585)); +#150702 = CIRCLE('',#150703,0.348635327447); +#150703 = AXIS2_PLACEMENT_3D('',#150704,#150705,#150706); +#150704 = CARTESIAN_POINT('',(133.89112948129,-111.0840720841,1.585)); +#150705 = DIRECTION('',(0.,0.,-1.)); +#150706 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#150707 = ORIENTED_EDGE('',*,*,#150708,.T.); +#150708 = EDGE_CURVE('',#150700,#150709,#150711,.T.); +#150709 = VERTEX_POINT('',#150710); +#150710 = CARTESIAN_POINT('',(133.658745,-111.420256,1.585)); +#150711 = LINE('',#150712,#150713); +#150712 = CARTESIAN_POINT('',(133.978901,-111.421478,1.585)); +#150713 = VECTOR('',#150714,1.); +#150714 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#150715 = ORIENTED_EDGE('',*,*,#150716,.T.); +#150716 = EDGE_CURVE('',#150709,#150717,#150719,.T.); +#150717 = VERTEX_POINT('',#150718); +#150718 = CARTESIAN_POINT('',(133.536032,-111.35805,1.585)); +#150719 = LINE('',#150720,#150721); +#150720 = CARTESIAN_POINT('',(133.658745,-111.420256,1.585)); +#150721 = VECTOR('',#150722,1.); +#150722 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#150723 = ORIENTED_EDGE('',*,*,#150724,.T.); +#150724 = EDGE_CURVE('',#150717,#150725,#150727,.T.); +#150725 = VERTEX_POINT('',#150726); +#150726 = CARTESIAN_POINT('',(133.473337,-111.294347,1.585)); +#150727 = LINE('',#150728,#150729); +#150728 = CARTESIAN_POINT('',(133.536032,-111.35805,1.585)); +#150729 = VECTOR('',#150730,1.); +#150730 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#150731 = ORIENTED_EDGE('',*,*,#150732,.T.); +#150732 = EDGE_CURVE('',#150725,#150733,#150735,.T.); +#150733 = VERTEX_POINT('',#150734); +#150734 = CARTESIAN_POINT('',(133.588732,-111.199648,1.585)); +#150735 = CIRCLE('',#150736,7.50001266804E-02); +#150736 = AXIS2_PLACEMENT_3D('',#150737,#150738,#150739); +#150737 = CARTESIAN_POINT('',(133.53569805199,-111.2526802483,1.585)); +#150738 = DIRECTION('',(0.,0.,-1.)); +#150739 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#150740 = ORIENTED_EDGE('',*,*,#150741,.T.); +#150741 = EDGE_CURVE('',#150733,#150742,#150744,.T.); +#150742 = VERTEX_POINT('',#150743); +#150743 = CARTESIAN_POINT('',(133.627744,-111.238661,1.585)); +#150744 = LINE('',#150745,#150746); +#150745 = CARTESIAN_POINT('',(133.588732,-111.199648,1.585)); +#150746 = VECTOR('',#150747,1.); +#150747 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#150748 = ORIENTED_EDGE('',*,*,#150749,.T.); +#150749 = EDGE_CURVE('',#150742,#150750,#150752,.T.); +#150750 = VERTEX_POINT('',#150751); +#150751 = CARTESIAN_POINT('',(134.015079,-111.238661,1.585)); +#150752 = CIRCLE('',#150753,0.358502380266); +#150753 = AXIS2_PLACEMENT_3D('',#150754,#150755,#150756); +#150754 = CARTESIAN_POINT('',(133.8214115,-110.936971,1.585)); +#150755 = DIRECTION('',(0.,0.,1.)); +#150756 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#150757 = ORIENTED_EDGE('',*,*,#150758,.T.); +#150758 = EDGE_CURVE('',#150750,#150759,#150761,.T.); +#150759 = VERTEX_POINT('',#150760); +#150760 = CARTESIAN_POINT('',(134.045486,-111.208253,1.585)); +#150761 = LINE('',#150762,#150763); +#150762 = CARTESIAN_POINT('',(134.015079,-111.238661,1.585)); +#150763 = VECTOR('',#150764,1.); +#150764 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#150765 = ORIENTED_EDGE('',*,*,#150766,.T.); +#150766 = EDGE_CURVE('',#150759,#150767,#150769,.T.); +#150767 = VERTEX_POINT('',#150768); +#150768 = CARTESIAN_POINT('',(134.045487,-110.868536,1.585)); +#150769 = CIRCLE('',#150770,0.305616146029); +#150770 = AXIS2_PLACEMENT_3D('',#150771,#150772,#150773); +#150771 = CARTESIAN_POINT('',(133.79142092049,-111.0383937521,1.585)); +#150772 = DIRECTION('',(0.,-0.,1.)); +#150773 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#150774 = ORIENTED_EDGE('',*,*,#150775,.T.); +#150775 = EDGE_CURVE('',#150767,#150776,#150778,.T.); +#150776 = VERTEX_POINT('',#150777); +#150777 = CARTESIAN_POINT('',(134.01508,-110.838129,1.585)); +#150778 = LINE('',#150779,#150780); +#150779 = CARTESIAN_POINT('',(134.045487,-110.868536,1.585)); +#150780 = VECTOR('',#150781,1.); +#150781 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#150782 = ORIENTED_EDGE('',*,*,#150783,.T.); +#150783 = EDGE_CURVE('',#150776,#150784,#150786,.T.); +#150784 = VERTEX_POINT('',#150785); +#150785 = CARTESIAN_POINT('',(133.946564,-110.803871,1.585)); +#150786 = LINE('',#150787,#150788); +#150787 = CARTESIAN_POINT('',(134.01508,-110.838129,1.585)); +#150788 = VECTOR('',#150789,1.); +#150789 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150790 = ORIENTED_EDGE('',*,*,#150791,.T.); +#150791 = EDGE_CURVE('',#150784,#150792,#150794,.T.); +#150792 = VERTEX_POINT('',#150793); +#150793 = CARTESIAN_POINT('',(133.80678,-110.80243,1.585)); +#150794 = LINE('',#150795,#150796); +#150795 = CARTESIAN_POINT('',(133.946564,-110.803871,1.585)); +#150796 = VECTOR('',#150797,1.); +#150797 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#150798 = ORIENTED_EDGE('',*,*,#150799,.T.); +#150799 = EDGE_CURVE('',#150792,#150800,#150802,.T.); +#150800 = VERTEX_POINT('',#150801); +#150801 = CARTESIAN_POINT('',(133.764969,-110.679483,1.585)); +#150802 = CIRCLE('',#150803,7.500015628756E-02); +#150803 = AXIS2_PLACEMENT_3D('',#150804,#150805,#150806); +#150804 = CARTESIAN_POINT('',(133.82141228432,-110.7288710461,1.585)); +#150805 = DIRECTION('',(0.,0.,-1.)); +#150806 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#150807 = ORIENTED_EDGE('',*,*,#150808,.T.); +#150808 = EDGE_CURVE('',#150800,#150809,#150811,.T.); +#150809 = VERTEX_POINT('',#150810); +#150810 = CARTESIAN_POINT('',(133.989463,-110.422919,1.585)); +#150811 = LINE('',#150812,#150813); +#150812 = CARTESIAN_POINT('',(133.764969,-110.679483,1.585)); +#150813 = VECTOR('',#150814,1.); +#150814 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#150815 = ORIENTED_EDGE('',*,*,#150816,.T.); +#150816 = EDGE_CURVE('',#150809,#150639,#150817,.T.); +#150817 = LINE('',#150818,#150819); +#150818 = CARTESIAN_POINT('',(133.989463,-110.422919,1.585)); +#150819 = VECTOR('',#150820,1.); +#150820 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#150821 = PLANE('',#150822); +#150822 = AXIS2_PLACEMENT_3D('',#150823,#150824,#150825); +#150823 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150824 = DIRECTION('',(0.,0.,1.)); +#150825 = DIRECTION('',(1.,0.,-0.)); +#150826 = SHELL_BASED_SURFACE_MODEL('',(#150827)); +#150827 = OPEN_SHELL('',(#150828)); +#150828 = ADVANCED_FACE('',(#150829),#150971,.T.); +#150829 = FACE_BOUND('',#150830,.F.); +#150830 = EDGE_LOOP('',(#150831,#150842,#150850,#150858,#150866,#150874, + #150882,#150890,#150898,#150907,#150915,#150924,#150932,#150940, + #150948,#150956,#150965)); +#150831 = ORIENTED_EDGE('',*,*,#150832,.T.); +#150832 = EDGE_CURVE('',#150833,#150835,#150837,.T.); +#150833 = VERTEX_POINT('',#150834); +#150834 = CARTESIAN_POINT('',(136.684506,-110.618892,1.585)); +#150835 = VERTEX_POINT('',#150836); +#150836 = CARTESIAN_POINT('',(136.801174,-110.681252,1.585)); +#150837 = CIRCLE('',#150838,7.500000000002E-02); +#150838 = AXIS2_PLACEMENT_3D('',#150839,#150840,#150841); +#150839 = CARTESIAN_POINT('',(136.726174,-110.6812520655,1.585)); +#150840 = DIRECTION('',(0.,0.,-1.)); +#150841 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#150842 = ORIENTED_EDGE('',*,*,#150843,.T.); +#150843 = EDGE_CURVE('',#150835,#150844,#150846,.T.); +#150844 = VERTEX_POINT('',#150845); +#150845 = CARTESIAN_POINT('',(136.801174,-111.187356,1.585)); +#150846 = LINE('',#150847,#150848); +#150847 = CARTESIAN_POINT('',(136.801174,-110.681252,1.585)); +#150848 = VECTOR('',#150849,1.); +#150849 = DIRECTION('',(0.,-1.,0.)); +#150850 = ORIENTED_EDGE('',*,*,#150851,.T.); +#150851 = EDGE_CURVE('',#150844,#150852,#150854,.T.); +#150852 = VERTEX_POINT('',#150853); +#150853 = CARTESIAN_POINT('',(136.829694,-111.244398,1.585)); +#150854 = LINE('',#150855,#150856); +#150855 = CARTESIAN_POINT('',(136.801174,-111.187356,1.585)); +#150856 = VECTOR('',#150857,1.); +#150857 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#150858 = ORIENTED_EDGE('',*,*,#150859,.T.); +#150859 = EDGE_CURVE('',#150852,#150860,#150862,.T.); +#150860 = VERTEX_POINT('',#150861); +#150861 = CARTESIAN_POINT('',(136.886736,-111.272919,1.585)); +#150862 = LINE('',#150863,#150864); +#150863 = CARTESIAN_POINT('',(136.829694,-111.244398,1.585)); +#150864 = VECTOR('',#150865,1.); +#150865 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#150866 = ORIENTED_EDGE('',*,*,#150867,.T.); +#150867 = EDGE_CURVE('',#150860,#150868,#150870,.T.); +#150868 = VERTEX_POINT('',#150869); +#150869 = CARTESIAN_POINT('',(136.994183,-111.272919,1.585)); +#150870 = LINE('',#150871,#150872); +#150871 = CARTESIAN_POINT('',(136.886736,-111.272919,1.585)); +#150872 = VECTOR('',#150873,1.); +#150873 = DIRECTION('',(1.,0.,0.)); +#150874 = ORIENTED_EDGE('',*,*,#150875,.T.); +#150875 = EDGE_CURVE('',#150868,#150876,#150878,.T.); +#150876 = VERTEX_POINT('',#150877); +#150877 = CARTESIAN_POINT('',(137.062698,-111.238661,1.585)); +#150878 = LINE('',#150879,#150880); +#150879 = CARTESIAN_POINT('',(136.994183,-111.272919,1.585)); +#150880 = VECTOR('',#150881,1.); +#150881 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#150882 = ORIENTED_EDGE('',*,*,#150883,.T.); +#150883 = EDGE_CURVE('',#150876,#150884,#150886,.T.); +#150884 = VERTEX_POINT('',#150885); +#150885 = CARTESIAN_POINT('',(137.079745,-111.221614,1.585)); +#150886 = LINE('',#150887,#150888); +#150887 = CARTESIAN_POINT('',(137.062698,-111.238661,1.585)); +#150888 = VECTOR('',#150889,1.); +#150889 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150890 = ORIENTED_EDGE('',*,*,#150891,.T.); +#150891 = EDGE_CURVE('',#150884,#150892,#150894,.T.); +#150892 = VERTEX_POINT('',#150893); +#150893 = CARTESIAN_POINT('',(137.081186,-110.66662,1.585)); +#150894 = LINE('',#150895,#150896); +#150895 = CARTESIAN_POINT('',(137.079745,-111.221614,1.585)); +#150896 = VECTOR('',#150897,1.); +#150897 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#150898 = ORIENTED_EDGE('',*,*,#150899,.T.); +#150899 = EDGE_CURVE('',#150892,#150900,#150902,.T.); +#150900 = VERTEX_POINT('',#150901); +#150901 = CARTESIAN_POINT('',(137.229745,-110.681252,1.585)); +#150902 = CIRCLE('',#150903,7.500006711464E-02); +#150903 = AXIS2_PLACEMENT_3D('',#150904,#150905,#150906); +#150904 = CARTESIAN_POINT('',(137.15474493288,-110.6812519328,1.585)); +#150905 = DIRECTION('',(0.,0.,-1.)); +#150906 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#150907 = ORIENTED_EDGE('',*,*,#150908,.T.); +#150908 = EDGE_CURVE('',#150900,#150909,#150911,.T.); +#150909 = VERTEX_POINT('',#150910); +#150910 = CARTESIAN_POINT('',(137.228304,-111.362551,1.585)); +#150911 = LINE('',#150912,#150913); +#150912 = CARTESIAN_POINT('',(137.229745,-110.681252,1.585)); +#150913 = VECTOR('',#150914,1.); +#150914 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#150915 = ORIENTED_EDGE('',*,*,#150916,.T.); +#150916 = EDGE_CURVE('',#150909,#150917,#150919,.T.); +#150917 = VERTEX_POINT('',#150918); +#150918 = CARTESIAN_POINT('',(137.093675,-111.390877,1.585)); +#150919 = CIRCLE('',#150920,7.47233536147E-02); +#150920 = AXIS2_PLACEMENT_3D('',#150921,#150922,#150923); +#150921 = CARTESIAN_POINT('',(137.15498058714,-111.3481545871,1.585)); +#150922 = DIRECTION('',(-0.,0.,-1.)); +#150923 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#150924 = ORIENTED_EDGE('',*,*,#150925,.T.); +#150925 = EDGE_CURVE('',#150917,#150926,#150928,.T.); +#150926 = VERTEX_POINT('',#150927); +#150927 = CARTESIAN_POINT('',(137.02652,-111.421478,1.585)); +#150928 = LINE('',#150929,#150930); +#150929 = CARTESIAN_POINT('',(137.093675,-111.390877,1.585)); +#150930 = VECTOR('',#150931,1.); +#150931 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#150932 = ORIENTED_EDGE('',*,*,#150933,.T.); +#150933 = EDGE_CURVE('',#150926,#150934,#150936,.T.); +#150934 = VERTEX_POINT('',#150935); +#150935 = CARTESIAN_POINT('',(136.849221,-111.420256,1.585)); +#150936 = LINE('',#150937,#150938); +#150937 = CARTESIAN_POINT('',(137.02652,-111.421478,1.585)); +#150938 = VECTOR('',#150939,1.); +#150939 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#150940 = ORIENTED_EDGE('',*,*,#150941,.T.); +#150941 = EDGE_CURVE('',#150934,#150942,#150944,.T.); +#150942 = VERTEX_POINT('',#150943); +#150943 = CARTESIAN_POINT('',(136.727809,-111.35955,1.585)); +#150944 = LINE('',#150945,#150946); +#150945 = CARTESIAN_POINT('',(136.849221,-111.420256,1.585)); +#150946 = VECTOR('',#150947,1.); +#150947 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#150948 = ORIENTED_EDGE('',*,*,#150949,.T.); +#150949 = EDGE_CURVE('',#150942,#150950,#150952,.T.); +#150950 = VERTEX_POINT('',#150951); +#150951 = CARTESIAN_POINT('',(136.706711,-111.333841,1.585)); +#150952 = LINE('',#150953,#150954); +#150953 = CARTESIAN_POINT('',(136.727809,-111.35955,1.585)); +#150954 = VECTOR('',#150955,1.); +#150955 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#150956 = ORIENTED_EDGE('',*,*,#150957,.T.); +#150957 = EDGE_CURVE('',#150950,#150958,#150960,.T.); +#150958 = VERTEX_POINT('',#150959); +#150959 = CARTESIAN_POINT('',(136.663814,-110.639584,1.585)); +#150960 = CIRCLE('',#150961,0.780471555046); +#150961 = AXIS2_PLACEMENT_3D('',#150962,#150963,#150964); +#150962 = CARTESIAN_POINT('',(137.38262964714,-110.9436233291,1.585)); +#150963 = DIRECTION('',(0.,0.,-1.)); +#150964 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#150965 = ORIENTED_EDGE('',*,*,#150966,.T.); +#150966 = EDGE_CURVE('',#150958,#150833,#150967,.T.); +#150967 = LINE('',#150968,#150969); +#150968 = CARTESIAN_POINT('',(136.663814,-110.639584,1.585)); +#150969 = VECTOR('',#150970,1.); +#150970 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#150971 = PLANE('',#150972); +#150972 = AXIS2_PLACEMENT_3D('',#150973,#150974,#150975); +#150973 = CARTESIAN_POINT('',(0.,0.,1.585)); +#150974 = DIRECTION('',(0.,0.,1.)); +#150975 = DIRECTION('',(1.,0.,-0.)); +#150976 = SHELL_BASED_SURFACE_MODEL('',(#150977)); +#150977 = OPEN_SHELL('',(#150978)); +#150978 = ADVANCED_FACE('',(#150979),#151114,.T.); +#150979 = FACE_BOUND('',#150980,.F.); +#150980 = EDGE_LOOP('',(#150981,#150992,#151000,#151008,#151016,#151025, + #151033,#151041,#151050,#151058,#151066,#151075,#151083,#151091, + #151100,#151108)); +#150981 = ORIENTED_EDGE('',*,*,#150982,.T.); +#150982 = EDGE_CURVE('',#150983,#150985,#150987,.T.); +#150983 = VERTEX_POINT('',#150984); +#150984 = CARTESIAN_POINT('',(137.775429,-110.241051,1.585)); +#150985 = VERTEX_POINT('',#150986); +#150986 = CARTESIAN_POINT('',(137.892563,-110.324018,1.585)); +#150987 = CIRCLE('',#150988,7.499955990671E-02); +#150988 = AXIS2_PLACEMENT_3D('',#150989,#150990,#150991); +#150989 = CARTESIAN_POINT('',(137.82141250095,-110.3003000643,1.585)); +#150990 = DIRECTION('',(0.,0.,-1.)); +#150991 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#150992 = ORIENTED_EDGE('',*,*,#150993,.T.); +#150993 = EDGE_CURVE('',#150985,#150994,#150996,.T.); +#150994 = VERTEX_POINT('',#150995); +#150995 = CARTESIAN_POINT('',(137.687374,-110.939585,1.585)); +#150996 = LINE('',#150997,#150998); +#150997 = CARTESIAN_POINT('',(137.892563,-110.324018,1.585)); +#150998 = VECTOR('',#150999,1.); +#150999 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#151000 = ORIENTED_EDGE('',*,*,#151001,.T.); +#151001 = EDGE_CURVE('',#150994,#151002,#151004,.T.); +#151002 = VERTEX_POINT('',#151003); +#151003 = CARTESIAN_POINT('',(137.984507,-110.939585,1.585)); +#151004 = LINE('',#151005,#151006); +#151005 = CARTESIAN_POINT('',(137.687374,-110.939585,1.585)); +#151006 = VECTOR('',#151007,1.); +#151007 = DIRECTION('',(1.,0.,0.)); +#151008 = ORIENTED_EDGE('',*,*,#151009,.T.); +#151009 = EDGE_CURVE('',#151002,#151010,#151012,.T.); +#151010 = VERTEX_POINT('',#151011); +#151011 = CARTESIAN_POINT('',(137.985948,-110.66662,1.585)); +#151012 = LINE('',#151013,#151014); +#151013 = CARTESIAN_POINT('',(137.984507,-110.939585,1.585)); +#151014 = VECTOR('',#151015,1.); +#151015 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#151016 = ORIENTED_EDGE('',*,*,#151017,.T.); +#151017 = EDGE_CURVE('',#151010,#151018,#151020,.T.); +#151018 = VERTEX_POINT('',#151019); +#151019 = CARTESIAN_POINT('',(138.134507,-110.681252,1.585)); +#151020 = CIRCLE('',#151021,7.500006711465E-02); +#151021 = AXIS2_PLACEMENT_3D('',#151022,#151023,#151024); +#151022 = CARTESIAN_POINT('',(138.05950693288,-110.6812519328,1.585)); +#151023 = DIRECTION('',(0.,0.,-1.)); +#151024 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#151025 = ORIENTED_EDGE('',*,*,#151026,.T.); +#151026 = EDGE_CURVE('',#151018,#151027,#151029,.T.); +#151027 = VERTEX_POINT('',#151028); +#151028 = CARTESIAN_POINT('',(138.134507,-110.939585,1.585)); +#151029 = LINE('',#151030,#151031); +#151030 = CARTESIAN_POINT('',(138.134507,-110.681252,1.585)); +#151031 = VECTOR('',#151032,1.); +#151032 = DIRECTION('',(0.,-1.,0.)); +#151033 = ORIENTED_EDGE('',*,*,#151034,.T.); +#151034 = EDGE_CURVE('',#151027,#151035,#151037,.T.); +#151035 = VERTEX_POINT('',#151036); +#151036 = CARTESIAN_POINT('',(138.216996,-110.941026,1.585)); +#151037 = LINE('',#151038,#151039); +#151038 = CARTESIAN_POINT('',(138.134507,-110.939585,1.585)); +#151039 = VECTOR('',#151040,1.); +#151040 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#151041 = ORIENTED_EDGE('',*,*,#151042,.T.); +#151042 = EDGE_CURVE('',#151035,#151043,#151045,.T.); +#151043 = VERTEX_POINT('',#151044); +#151044 = CARTESIAN_POINT('',(138.202364,-111.089585,1.585)); +#151045 = CIRCLE('',#151046,7.500006711464E-02); +#151046 = AXIS2_PLACEMENT_3D('',#151047,#151048,#151049); +#151047 = CARTESIAN_POINT('',(138.20236406711,-111.0145849328,1.585)); +#151048 = DIRECTION('',(0.,0.,-1.)); +#151049 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#151050 = ORIENTED_EDGE('',*,*,#151051,.T.); +#151051 = EDGE_CURVE('',#151043,#151052,#151054,.T.); +#151052 = VERTEX_POINT('',#151053); +#151053 = CARTESIAN_POINT('',(138.134507,-111.089585,1.585)); +#151054 = LINE('',#151055,#151056); +#151055 = CARTESIAN_POINT('',(138.202364,-111.089585,1.585)); +#151056 = VECTOR('',#151057,1.); +#151057 = DIRECTION('',(-1.,0.,0.)); +#151058 = ORIENTED_EDGE('',*,*,#151059,.T.); +#151059 = EDGE_CURVE('',#151052,#151060,#151062,.T.); +#151060 = VERTEX_POINT('',#151061); +#151061 = CARTESIAN_POINT('',(138.133066,-111.362551,1.585)); +#151062 = LINE('',#151063,#151064); +#151063 = CARTESIAN_POINT('',(138.134507,-111.089585,1.585)); +#151064 = VECTOR('',#151065,1.); +#151065 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#151066 = ORIENTED_EDGE('',*,*,#151067,.T.); +#151067 = EDGE_CURVE('',#151060,#151068,#151070,.T.); +#151068 = VERTEX_POINT('',#151069); +#151069 = CARTESIAN_POINT('',(137.984507,-111.347919,1.585)); +#151070 = CIRCLE('',#151071,7.500006711464E-02); +#151071 = AXIS2_PLACEMENT_3D('',#151072,#151073,#151074); +#151072 = CARTESIAN_POINT('',(138.05950706711,-111.3479190671,1.585)); +#151073 = DIRECTION('',(-0.,0.,-1.)); +#151074 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#151075 = ORIENTED_EDGE('',*,*,#151076,.T.); +#151076 = EDGE_CURVE('',#151068,#151077,#151079,.T.); +#151077 = VERTEX_POINT('',#151078); +#151078 = CARTESIAN_POINT('',(137.984507,-111.089585,1.585)); +#151079 = LINE('',#151080,#151081); +#151080 = CARTESIAN_POINT('',(137.984507,-111.347919,1.585)); +#151081 = VECTOR('',#151082,1.); +#151082 = DIRECTION('',(0.,1.,0.)); +#151083 = ORIENTED_EDGE('',*,*,#151084,.T.); +#151084 = EDGE_CURVE('',#151077,#151085,#151087,.T.); +#151085 = VERTEX_POINT('',#151086); +#151086 = CARTESIAN_POINT('',(137.568685,-111.088144,1.585)); +#151087 = LINE('',#151088,#151089); +#151088 = CARTESIAN_POINT('',(137.984507,-111.089585,1.585)); +#151089 = VECTOR('',#151090,1.); +#151090 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#151091 = ORIENTED_EDGE('',*,*,#151092,.T.); +#151092 = EDGE_CURVE('',#151085,#151093,#151095,.T.); +#151093 = VERTEX_POINT('',#151094); +#151094 = CARTESIAN_POINT('',(137.512166,-110.990868,1.585)); +#151095 = CIRCLE('',#151096,7.499997045039E-02); +#151096 = AXIS2_PLACEMENT_3D('',#151097,#151098,#151099); +#151097 = CARTESIAN_POINT('',(137.58331717257,-111.0145852133,1.585)); +#151098 = DIRECTION('',(0.,0.,-1.)); +#151099 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#151100 = ORIENTED_EDGE('',*,*,#151101,.T.); +#151101 = EDGE_CURVE('',#151093,#151102,#151104,.T.); +#151102 = VERTEX_POINT('',#151103); +#151103 = CARTESIAN_POINT('',(137.756255,-110.263158,1.585)); +#151104 = LINE('',#151105,#151106); +#151105 = CARTESIAN_POINT('',(137.512166,-110.990868,1.585)); +#151106 = VECTOR('',#151107,1.); +#151107 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#151108 = ORIENTED_EDGE('',*,*,#151109,.T.); +#151109 = EDGE_CURVE('',#151102,#150983,#151110,.T.); +#151110 = LINE('',#151111,#151112); +#151111 = CARTESIAN_POINT('',(137.756255,-110.263158,1.585)); +#151112 = VECTOR('',#151113,1.); +#151113 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#151114 = PLANE('',#151115); +#151115 = AXIS2_PLACEMENT_3D('',#151116,#151117,#151118); +#151116 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151117 = DIRECTION('',(0.,0.,1.)); +#151118 = DIRECTION('',(1.,0.,-0.)); +#151119 = SHELL_BASED_SURFACE_MODEL('',(#151120)); +#151120 = OPEN_SHELL('',(#151121)); +#151121 = ADVANCED_FACE('',(#151122),#151320,.T.); +#151122 = FACE_BOUND('',#151123,.F.); +#151123 = EDGE_LOOP('',(#151124,#151135,#151143,#151152,#151160,#151169, + #151177,#151186,#151194,#151202,#151210,#151218,#151226,#151234, + #151242,#151250,#151258,#151266,#151274,#151282,#151290,#151298, + #151306,#151314)); +#151124 = ORIENTED_EDGE('',*,*,#151125,.T.); +#151125 = EDGE_CURVE('',#151126,#151128,#151130,.T.); +#151126 = VERTEX_POINT('',#151127); +#151127 = CARTESIAN_POINT('',(131.831888,-110.330381,1.585)); +#151128 = VERTEX_POINT('',#151129); +#151129 = CARTESIAN_POINT('',(132.291651,-110.333178,1.585)); +#151130 = CIRCLE('',#151131,0.460785175821); +#151131 = AXIS2_PLACEMENT_3D('',#151132,#151133,#151134); +#151132 = CARTESIAN_POINT('',(132.05934010897,-110.7311159702,1.585)); +#151133 = DIRECTION('',(0.,0.,-1.)); +#151134 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#151135 = ORIENTED_EDGE('',*,*,#151136,.T.); +#151136 = EDGE_CURVE('',#151128,#151137,#151139,.T.); +#151137 = VERTEX_POINT('',#151138); +#151138 = CARTESIAN_POINT('',(132.359962,-110.401489,1.585)); +#151139 = LINE('',#151140,#151141); +#151140 = CARTESIAN_POINT('',(132.291651,-110.333178,1.585)); +#151141 = VECTOR('',#151142,1.); +#151142 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#151143 = ORIENTED_EDGE('',*,*,#151144,.T.); +#151144 = EDGE_CURVE('',#151137,#151145,#151147,.T.); +#151145 = VERTEX_POINT('',#151146); +#151146 = CARTESIAN_POINT('',(132.244569,-110.49619,1.585)); +#151147 = CIRCLE('',#151148,7.500003178655E-02); +#151148 = AXIS2_PLACEMENT_3D('',#151149,#151150,#151151); +#151149 = CARTESIAN_POINT('',(132.29760156212,-110.4431565,1.585)); +#151150 = DIRECTION('',(0.,0.,-1.)); +#151151 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#151152 = ORIENTED_EDGE('',*,*,#151153,.T.); +#151153 = EDGE_CURVE('',#151145,#151154,#151156,.T.); +#151154 = VERTEX_POINT('',#151155); +#151155 = CARTESIAN_POINT('',(132.209469,-110.46109,1.585)); +#151156 = LINE('',#151157,#151158); +#151157 = CARTESIAN_POINT('',(132.244569,-110.49619,1.585)); +#151158 = VECTOR('',#151159,1.); +#151159 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#151160 = ORIENTED_EDGE('',*,*,#151161,.T.); +#151161 = EDGE_CURVE('',#151154,#151162,#151164,.T.); +#151162 = VERTEX_POINT('',#151163); +#151163 = CARTESIAN_POINT('',(131.909545,-110.46109,1.585)); +#151164 = CIRCLE('',#151165,0.299308637371); +#151165 = AXIS2_PLACEMENT_3D('',#151166,#151167,#151168); +#151166 = CARTESIAN_POINT('',(132.059507,-110.720121,1.585)); +#151167 = DIRECTION('',(0.,0.,1.)); +#151168 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#151169 = ORIENTED_EDGE('',*,*,#151170,.T.); +#151170 = EDGE_CURVE('',#151162,#151171,#151173,.T.); +#151171 = VERTEX_POINT('',#151172); +#151172 = CARTESIAN_POINT('',(131.835432,-110.535203,1.585)); +#151173 = LINE('',#151174,#151175); +#151174 = CARTESIAN_POINT('',(131.909545,-110.46109,1.585)); +#151175 = VECTOR('',#151176,1.); +#151176 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#151177 = ORIENTED_EDGE('',*,*,#151178,.T.); +#151178 = EDGE_CURVE('',#151171,#151179,#151181,.T.); +#151179 = VERTEX_POINT('',#151180); +#151180 = CARTESIAN_POINT('',(131.753555,-110.910113,1.585)); +#151181 = CIRCLE('',#151182,0.611712714363); +#151182 = AXIS2_PLACEMENT_3D('',#151183,#151184,#151185); +#151183 = CARTESIAN_POINT('',(132.36196027521,-110.8465876822,1.585)); +#151184 = DIRECTION('',(0.,0.,1.)); +#151185 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#151186 = ORIENTED_EDGE('',*,*,#151187,.T.); +#151187 = EDGE_CURVE('',#151179,#151188,#151190,.T.); +#151188 = VERTEX_POINT('',#151189); +#151189 = CARTESIAN_POINT('',(131.796938,-111.083647,1.585)); +#151190 = LINE('',#151191,#151192); +#151191 = CARTESIAN_POINT('',(131.753555,-110.910113,1.585)); +#151192 = VECTOR('',#151193,1.); +#151193 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#151194 = ORIENTED_EDGE('',*,*,#151195,.T.); +#151195 = EDGE_CURVE('',#151188,#151196,#151198,.T.); +#151196 = VERTEX_POINT('',#151197); +#151197 = CARTESIAN_POINT('',(131.835432,-111.160634,1.585)); +#151198 = LINE('',#151199,#151200); +#151199 = CARTESIAN_POINT('',(131.796938,-111.083647,1.585)); +#151200 = VECTOR('',#151201,1.); +#151201 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#151202 = ORIENTED_EDGE('',*,*,#151203,.T.); +#151203 = EDGE_CURVE('',#151196,#151204,#151206,.T.); +#151204 = VERTEX_POINT('',#151205); +#151205 = CARTESIAN_POINT('',(131.909545,-111.234748,1.585)); +#151206 = LINE('',#151207,#151208); +#151207 = CARTESIAN_POINT('',(131.835432,-111.160634,1.585)); +#151208 = VECTOR('',#151209,1.); +#151209 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#151210 = ORIENTED_EDGE('',*,*,#151211,.T.); +#151211 = EDGE_CURVE('',#151204,#151212,#151214,.T.); +#151212 = VERTEX_POINT('',#151213); +#151213 = CARTESIAN_POINT('',(132.003943,-111.266214,1.585)); +#151214 = LINE('',#151215,#151216); +#151215 = CARTESIAN_POINT('',(131.909545,-111.234748,1.585)); +#151216 = VECTOR('',#151217,1.); +#151217 = DIRECTION('',(0.94868329805,-0.316227766017,0.)); +#151218 = ORIENTED_EDGE('',*,*,#151219,.T.); +#151219 = EDGE_CURVE('',#151212,#151220,#151222,.T.); +#151220 = VERTEX_POINT('',#151221); +#151221 = CARTESIAN_POINT('',(131.994532,-111.288936,1.585)); +#151222 = LINE('',#151223,#151224); +#151223 = CARTESIAN_POINT('',(132.003943,-111.266214,1.585)); +#151224 = VECTOR('',#151225,1.); +#151225 = DIRECTION('',(-0.382657036063,-0.923890465776,0.)); +#151226 = ORIENTED_EDGE('',*,*,#151227,.T.); +#151227 = EDGE_CURVE('',#151220,#151228,#151230,.T.); +#151228 = VERTEX_POINT('',#151229); +#151229 = CARTESIAN_POINT('',(131.994532,-111.347464,1.585)); +#151230 = LINE('',#151231,#151232); +#151231 = CARTESIAN_POINT('',(131.994532,-111.288936,1.585)); +#151232 = VECTOR('',#151233,1.); +#151233 = DIRECTION('',(0.,-1.,0.)); +#151234 = ORIENTED_EDGE('',*,*,#151235,.T.); +#151235 = EDGE_CURVE('',#151228,#151236,#151238,.T.); +#151236 = VERTEX_POINT('',#151237); +#151237 = CARTESIAN_POINT('',(132.01693,-111.401536,1.585)); +#151238 = LINE('',#151239,#151240); +#151239 = CARTESIAN_POINT('',(131.994532,-111.347464,1.585)); +#151240 = VECTOR('',#151241,1.); +#151241 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#151242 = ORIENTED_EDGE('',*,*,#151243,.T.); +#151243 = EDGE_CURVE('',#151236,#151244,#151246,.T.); +#151244 = VERTEX_POINT('',#151245); +#151245 = CARTESIAN_POINT('',(132.036621,-111.421227,1.585)); +#151246 = LINE('',#151247,#151248); +#151247 = CARTESIAN_POINT('',(132.01693,-111.401536,1.585)); +#151248 = VECTOR('',#151249,1.); +#151249 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#151250 = ORIENTED_EDGE('',*,*,#151251,.T.); +#151251 = EDGE_CURVE('',#151244,#151252,#151254,.T.); +#151252 = VERTEX_POINT('',#151253); +#151253 = CARTESIAN_POINT('',(131.995425,-111.420719,1.585)); +#151254 = LINE('',#151255,#151256); +#151255 = CARTESIAN_POINT('',(132.036621,-111.421227,1.585)); +#151256 = VECTOR('',#151257,1.); +#151257 = DIRECTION('',(-0.99992397826,1.233035685389E-02,0.)); +#151258 = ORIENTED_EDGE('',*,*,#151259,.T.); +#151259 = EDGE_CURVE('',#151252,#151260,#151262,.T.); +#151260 = VERTEX_POINT('',#151261); +#151261 = CARTESIAN_POINT('',(131.827363,-111.362661,1.585)); +#151262 = LINE('',#151263,#151264); +#151263 = CARTESIAN_POINT('',(131.995425,-111.420719,1.585)); +#151264 = VECTOR('',#151265,1.); +#151265 = DIRECTION('',(-0.945189826766,0.32652134904,0.)); +#151266 = ORIENTED_EDGE('',*,*,#151267,.T.); +#151267 = EDGE_CURVE('',#151260,#151268,#151270,.T.); +#151268 = VERTEX_POINT('',#151269); +#151269 = CARTESIAN_POINT('',(131.710674,-111.244898,1.585)); +#151270 = LINE('',#151271,#151272); +#151271 = CARTESIAN_POINT('',(131.827363,-111.362661,1.585)); +#151272 = VECTOR('',#151273,1.); +#151273 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#151274 = ORIENTED_EDGE('',*,*,#151275,.T.); +#151275 = EDGE_CURVE('',#151268,#151276,#151278,.T.); +#151276 = VERTEX_POINT('',#151277); +#151277 = CARTESIAN_POINT('',(131.653413,-111.128013,1.585)); +#151278 = LINE('',#151279,#151280); +#151279 = CARTESIAN_POINT('',(131.710674,-111.244898,1.585)); +#151280 = VECTOR('',#151281,1.); +#151281 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#151282 = ORIENTED_EDGE('',*,*,#151283,.T.); +#151283 = EDGE_CURVE('',#151276,#151284,#151286,.T.); +#151284 = VERTEX_POINT('',#151285); +#151285 = CARTESIAN_POINT('',(131.603555,-110.919347,1.585)); +#151286 = LINE('',#151287,#151288); +#151287 = CARTESIAN_POINT('',(131.653413,-111.128013,1.585)); +#151288 = VECTOR('',#151289,1.); +#151289 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#151290 = ORIENTED_EDGE('',*,*,#151291,.T.); +#151291 = EDGE_CURVE('',#151284,#151292,#151294,.T.); +#151292 = VERTEX_POINT('',#151293); +#151293 = CARTESIAN_POINT('',(131.605794,-110.7583,1.585)); +#151294 = LINE('',#151295,#151296); +#151295 = CARTESIAN_POINT('',(131.603555,-110.919347,1.585)); +#151296 = VECTOR('',#151297,1.); +#151297 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#151298 = ORIENTED_EDGE('',*,*,#151299,.T.); +#151299 = EDGE_CURVE('',#151292,#151300,#151302,.T.); +#151300 = VERTEX_POINT('',#151301); +#151301 = CARTESIAN_POINT('',(131.659092,-110.552473,1.585)); +#151302 = LINE('',#151303,#151304); +#151303 = CARTESIAN_POINT('',(131.605794,-110.7583,1.585)); +#151304 = VECTOR('',#151305,1.); +#151305 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#151306 = ORIENTED_EDGE('',*,*,#151307,.T.); +#151307 = EDGE_CURVE('',#151300,#151308,#151310,.T.); +#151308 = VERTEX_POINT('',#151309); +#151309 = CARTESIAN_POINT('',(131.716041,-110.443492,1.585)); +#151310 = LINE('',#151311,#151312); +#151311 = CARTESIAN_POINT('',(131.659092,-110.552473,1.585)); +#151312 = VECTOR('',#151313,1.); +#151313 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#151314 = ORIENTED_EDGE('',*,*,#151315,.T.); +#151315 = EDGE_CURVE('',#151308,#151126,#151316,.T.); +#151316 = LINE('',#151317,#151318); +#151317 = CARTESIAN_POINT('',(131.716041,-110.443492,1.585)); +#151318 = VECTOR('',#151319,1.); +#151319 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#151320 = PLANE('',#151321); +#151321 = AXIS2_PLACEMENT_3D('',#151322,#151323,#151324); +#151322 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151323 = DIRECTION('',(0.,0.,1.)); +#151324 = DIRECTION('',(1.,0.,-0.)); +#151325 = SHELL_BASED_SURFACE_MODEL('',(#151326)); +#151326 = OPEN_SHELL('',(#151327)); +#151327 = ADVANCED_FACE('',(#151328),#151395,.T.); +#151328 = FACE_BOUND('',#151329,.F.); +#151329 = EDGE_LOOP('',(#151330,#151341,#151349,#151357,#151365,#151373, + #151381,#151389)); +#151330 = ORIENTED_EDGE('',*,*,#151331,.T.); +#151331 = EDGE_CURVE('',#151332,#151334,#151336,.T.); +#151332 = VERTEX_POINT('',#151333); +#151333 = CARTESIAN_POINT('',(132.255934,-111.19032,1.585)); +#151334 = VERTEX_POINT('',#151335); +#151335 = CARTESIAN_POINT('',(132.350635,-111.305713,1.585)); +#151336 = CIRCLE('',#151337,7.499993690113E-02); +#151337 = AXIS2_PLACEMENT_3D('',#151338,#151339,#151340); +#151338 = CARTESIAN_POINT('',(132.2976022483,-111.2526798237,1.585)); +#151339 = DIRECTION('',(0.,0.,-1.)); +#151340 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#151341 = ORIENTED_EDGE('',*,*,#151342,.T.); +#151342 = EDGE_CURVE('',#151334,#151343,#151345,.T.); +#151343 = VERTEX_POINT('',#151344); +#151344 = CARTESIAN_POINT('',(132.287125,-111.365457,1.585)); +#151345 = LINE('',#151346,#151347); +#151346 = CARTESIAN_POINT('',(132.350635,-111.305713,1.585)); +#151347 = VECTOR('',#151348,1.); +#151348 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#151349 = ORIENTED_EDGE('',*,*,#151350,.T.); +#151350 = EDGE_CURVE('',#151343,#151351,#151353,.T.); +#151351 = VERTEX_POINT('',#151352); +#151352 = CARTESIAN_POINT('',(132.280399,-111.367667,1.585)); +#151353 = LINE('',#151354,#151355); +#151354 = CARTESIAN_POINT('',(132.287125,-111.365457,1.585)); +#151355 = VECTOR('',#151356,1.); +#151356 = DIRECTION('',(-0.950030552242,-0.312156931377,0.)); +#151357 = ORIENTED_EDGE('',*,*,#151358,.T.); +#151358 = EDGE_CURVE('',#151351,#151359,#151361,.T.); +#151359 = VERTEX_POINT('',#151360); +#151360 = CARTESIAN_POINT('',(132.288768,-111.347464,1.585)); +#151361 = LINE('',#151362,#151363); +#151362 = CARTESIAN_POINT('',(132.280399,-111.367667,1.585)); +#151363 = VECTOR('',#151364,1.); +#151364 = DIRECTION('',(0.382708545648,0.923869129849,0.)); +#151365 = ORIENTED_EDGE('',*,*,#151366,.T.); +#151366 = EDGE_CURVE('',#151359,#151367,#151369,.T.); +#151367 = VERTEX_POINT('',#151368); +#151368 = CARTESIAN_POINT('',(132.288768,-111.288936,1.585)); +#151369 = LINE('',#151370,#151371); +#151370 = CARTESIAN_POINT('',(132.288768,-111.347464,1.585)); +#151371 = VECTOR('',#151372,1.); +#151372 = DIRECTION('',(0.,1.,0.)); +#151373 = ORIENTED_EDGE('',*,*,#151374,.T.); +#151374 = EDGE_CURVE('',#151367,#151375,#151377,.T.); +#151375 = VERTEX_POINT('',#151376); +#151376 = CARTESIAN_POINT('',(132.26637,-111.234864,1.585)); +#151377 = LINE('',#151378,#151379); +#151378 = CARTESIAN_POINT('',(132.288768,-111.288936,1.585)); +#151379 = VECTOR('',#151380,1.); +#151380 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#151381 = ORIENTED_EDGE('',*,*,#151382,.T.); +#151382 = EDGE_CURVE('',#151375,#151383,#151385,.T.); +#151383 = VERTEX_POINT('',#151384); +#151384 = CARTESIAN_POINT('',(132.238497,-111.206991,1.585)); +#151385 = LINE('',#151386,#151387); +#151386 = CARTESIAN_POINT('',(132.26637,-111.234864,1.585)); +#151387 = VECTOR('',#151388,1.); +#151388 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#151389 = ORIENTED_EDGE('',*,*,#151390,.T.); +#151390 = EDGE_CURVE('',#151383,#151332,#151391,.T.); +#151391 = LINE('',#151392,#151393); +#151392 = CARTESIAN_POINT('',(132.238497,-111.206991,1.585)); +#151393 = VECTOR('',#151394,1.); +#151394 = DIRECTION('',(0.722804782077,0.691052275162,0.)); +#151395 = PLANE('',#151396); +#151396 = AXIS2_PLACEMENT_3D('',#151397,#151398,#151399); +#151397 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151398 = DIRECTION('',(0.,0.,1.)); +#151399 = DIRECTION('',(1.,0.,-0.)); +#151400 = SHELL_BASED_SURFACE_MODEL('',(#151401)); +#151401 = OPEN_SHELL('',(#151402)); +#151402 = ADVANCED_FACE('',(#151403),#151439,.T.); +#151403 = FACE_BOUND('',#151404,.F.); +#151404 = EDGE_LOOP('',(#151405,#151416,#151424,#151433)); +#151405 = ORIENTED_EDGE('',*,*,#151406,.T.); +#151406 = EDGE_CURVE('',#151407,#151409,#151411,.T.); +#151407 = VERTEX_POINT('',#151408); +#151408 = CARTESIAN_POINT('',(179.279392,-111.3606,1.585)); +#151409 = VERTEX_POINT('',#151410); +#151410 = CARTESIAN_POINT('',(179.279392,-111.2406,1.585)); +#151411 = CIRCLE('',#151412,6.000000000043E-02); +#151412 = AXIS2_PLACEMENT_3D('',#151413,#151414,#151415); +#151413 = CARTESIAN_POINT('',(179.27939177441,-111.3006,1.585)); +#151414 = DIRECTION('',(0.,0.,-1.)); +#151415 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#151416 = ORIENTED_EDGE('',*,*,#151417,.T.); +#151417 = EDGE_CURVE('',#151409,#151418,#151420,.T.); +#151418 = VERTEX_POINT('',#151419); +#151419 = CARTESIAN_POINT('',(179.753908,-111.2406,1.585)); +#151420 = LINE('',#151421,#151422); +#151421 = CARTESIAN_POINT('',(179.279392,-111.2406,1.585)); +#151422 = VECTOR('',#151423,1.); +#151423 = DIRECTION('',(1.,0.,0.)); +#151424 = ORIENTED_EDGE('',*,*,#151425,.T.); +#151425 = EDGE_CURVE('',#151418,#151426,#151428,.T.); +#151426 = VERTEX_POINT('',#151427); +#151427 = CARTESIAN_POINT('',(179.753908,-111.3606,1.585)); +#151428 = CIRCLE('',#151429,6.000000000042E-02); +#151429 = AXIS2_PLACEMENT_3D('',#151430,#151431,#151432); +#151430 = CARTESIAN_POINT('',(179.75390822558,-111.3006,1.585)); +#151431 = DIRECTION('',(0.,0.,-1.)); +#151432 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#151433 = ORIENTED_EDGE('',*,*,#151434,.T.); +#151434 = EDGE_CURVE('',#151426,#151407,#151435,.T.); +#151435 = LINE('',#151436,#151437); +#151436 = CARTESIAN_POINT('',(179.753908,-111.3606,1.585)); +#151437 = VECTOR('',#151438,1.); +#151438 = DIRECTION('',(-1.,0.,0.)); +#151439 = PLANE('',#151440); +#151440 = AXIS2_PLACEMENT_3D('',#151441,#151442,#151443); +#151441 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151442 = DIRECTION('',(0.,0.,1.)); +#151443 = DIRECTION('',(1.,0.,-0.)); +#151444 = SHELL_BASED_SURFACE_MODEL('',(#151445)); +#151445 = OPEN_SHELL('',(#151446)); +#151446 = ADVANCED_FACE('',(#151447,#151549),#151617,.T.); +#151447 = FACE_BOUND('',#151448,.F.); +#151448 = EDGE_LOOP('',(#151449,#151460,#151468,#151476,#151485,#151493, + #151501,#151509,#151518,#151526,#151534,#151543)); +#151449 = ORIENTED_EDGE('',*,*,#151450,.T.); +#151450 = EDGE_CURVE('',#151451,#151453,#151455,.T.); +#151451 = VERTEX_POINT('',#151452); +#151452 = CARTESIAN_POINT('',(180.230028,-110.351919,1.585)); +#151453 = VERTEX_POINT('',#151454); +#151454 = CARTESIAN_POINT('',(180.478209,-110.107693,1.585)); +#151455 = CIRCLE('',#151456,0.348621382901); +#151456 = AXIS2_PLACEMENT_3D('',#151457,#151458,#151459); +#151457 = CARTESIAN_POINT('',(180.56596922951,-110.4450874438,1.585)); +#151458 = DIRECTION('',(0.,0.,-1.)); +#151459 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#151460 = ORIENTED_EDGE('',*,*,#151461,.T.); +#151461 = EDGE_CURVE('',#151453,#151462,#151464,.T.); +#151462 = VERTEX_POINT('',#151463); +#151463 = CARTESIAN_POINT('',(180.697949,-110.107693,1.585)); +#151464 = LINE('',#151465,#151466); +#151465 = CARTESIAN_POINT('',(180.478209,-110.107693,1.585)); +#151466 = VECTOR('',#151467,1.); +#151467 = DIRECTION('',(1.,0.,0.)); +#151468 = ORIENTED_EDGE('',*,*,#151469,.T.); +#151469 = EDGE_CURVE('',#151462,#151470,#151472,.T.); +#151470 = VERTEX_POINT('',#151471); +#151471 = CARTESIAN_POINT('',(180.733358,-110.12242,1.585)); +#151472 = LINE('',#151473,#151474); +#151473 = CARTESIAN_POINT('',(180.697949,-110.107693,1.585)); +#151474 = VECTOR('',#151475,1.); +#151475 = DIRECTION('',(0.923324376396,-0.3840209577,0.)); +#151476 = ORIENTED_EDGE('',*,*,#151477,.T.); +#151477 = EDGE_CURVE('',#151470,#151478,#151480,.T.); +#151478 = VERTEX_POINT('',#151479); +#151479 = CARTESIAN_POINT('',(180.820223,-110.118892,1.585)); +#151480 = CIRCLE('',#151481,7.226854941615E-02); +#151481 = AXIS2_PLACEMENT_3D('',#151482,#151483,#151484); +#151482 = CARTESIAN_POINT('',(180.77913343241,-110.1783427415,1.585)); +#151483 = DIRECTION('',(0.,0.,-1.)); +#151484 = DIRECTION('',(-0.633407378233,0.773818514382,0.)); +#151485 = ORIENTED_EDGE('',*,*,#151486,.T.); +#151486 = EDGE_CURVE('',#151478,#151487,#151489,.T.); +#151487 = VERTEX_POINT('',#151488); +#151488 = CARTESIAN_POINT('',(180.840915,-110.139584,1.585)); +#151489 = LINE('',#151490,#151491); +#151490 = CARTESIAN_POINT('',(180.820223,-110.118892,1.585)); +#151491 = VECTOR('',#151492,1.); +#151492 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#151493 = ORIENTED_EDGE('',*,*,#151494,.T.); +#151494 = EDGE_CURVE('',#151487,#151495,#151497,.T.); +#151495 = VERTEX_POINT('',#151496); +#151496 = CARTESIAN_POINT('',(180.853555,-110.181252,1.585)); +#151497 = LINE('',#151498,#151499); +#151498 = CARTESIAN_POINT('',(180.840915,-110.139584,1.585)); +#151499 = VECTOR('',#151500,1.); +#151500 = DIRECTION('',(0.29028783999,-0.956939376321,0.)); +#151501 = ORIENTED_EDGE('',*,*,#151502,.T.); +#151502 = EDGE_CURVE('',#151495,#151503,#151505,.T.); +#151503 = VERTEX_POINT('',#151504); +#151504 = CARTESIAN_POINT('',(180.852114,-111.195884,1.585)); +#151505 = LINE('',#151506,#151507); +#151506 = CARTESIAN_POINT('',(180.853555,-110.181252,1.585)); +#151507 = VECTOR('',#151508,1.); +#151508 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#151509 = ORIENTED_EDGE('',*,*,#151510,.T.); +#151510 = EDGE_CURVE('',#151503,#151511,#151513,.T.); +#151511 = VERTEX_POINT('',#151512); +#151512 = CARTESIAN_POINT('',(180.703555,-111.181252,1.585)); +#151513 = CIRCLE('',#151514,7.500006711465E-02); +#151514 = AXIS2_PLACEMENT_3D('',#151515,#151516,#151517); +#151515 = CARTESIAN_POINT('',(180.77855506711,-111.1812520671,1.585)); +#151516 = DIRECTION('',(-0.,0.,-1.)); +#151517 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#151518 = ORIENTED_EDGE('',*,*,#151519,.T.); +#151519 = EDGE_CURVE('',#151511,#151520,#151522,.T.); +#151520 = VERTEX_POINT('',#151521); +#151521 = CARTESIAN_POINT('',(180.703126,-110.920256,1.585)); +#151522 = LINE('',#151523,#151524); +#151523 = CARTESIAN_POINT('',(180.703555,-111.181252,1.585)); +#151524 = VECTOR('',#151525,1.); +#151525 = DIRECTION('',(-1.643701131322E-03,0.999998649122,0.)); +#151526 = ORIENTED_EDGE('',*,*,#151527,.T.); +#151527 = EDGE_CURVE('',#151520,#151528,#151530,.T.); +#151528 = VERTEX_POINT('',#151529); +#151529 = CARTESIAN_POINT('',(180.473031,-110.920256,1.585)); +#151530 = LINE('',#151531,#151532); +#151531 = CARTESIAN_POINT('',(180.703126,-110.920256,1.585)); +#151532 = VECTOR('',#151533,1.); +#151533 = DIRECTION('',(-1.,0.,0.)); +#151534 = ORIENTED_EDGE('',*,*,#151535,.T.); +#151535 = EDGE_CURVE('',#151528,#151536,#151538,.T.); +#151536 = VERTEX_POINT('',#151537); +#151537 = CARTESIAN_POINT('',(180.228806,-110.672074,1.585)); +#151538 = CIRCLE('',#151539,0.348628446662); +#151539 = AXIS2_PLACEMENT_3D('',#151540,#151541,#151542); +#151540 = CARTESIAN_POINT('',(180.56620661322,-110.5843094284,1.585)); +#151541 = DIRECTION('',(0.,0.,-1.)); +#151542 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#151543 = ORIENTED_EDGE('',*,*,#151544,.T.); +#151544 = EDGE_CURVE('',#151536,#151451,#151545,.T.); +#151545 = LINE('',#151546,#151547); +#151546 = CARTESIAN_POINT('',(180.228806,-110.672074,1.585)); +#151547 = VECTOR('',#151548,1.); +#151548 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#151549 = FACE_BOUND('',#151550,.F.); +#151550 = EDGE_LOOP('',(#151551,#151561,#151569,#151578,#151586,#151595, + #151603,#151611)); +#151551 = ORIENTED_EDGE('',*,*,#151552,.T.); +#151552 = EDGE_CURVE('',#151553,#151555,#151557,.T.); +#151553 = VERTEX_POINT('',#151554); +#151554 = CARTESIAN_POINT('',(180.703555,-110.275223,1.585)); +#151555 = VERTEX_POINT('',#151556); +#151556 = CARTESIAN_POINT('',(180.665612,-110.256252,1.585)); +#151557 = LINE('',#151558,#151559); +#151558 = CARTESIAN_POINT('',(180.703555,-110.275223,1.585)); +#151559 = VECTOR('',#151560,1.); +#151560 = DIRECTION('',(-0.894431905558,0.447204166259,0.)); +#151561 = ORIENTED_EDGE('',*,*,#151562,.T.); +#151562 = EDGE_CURVE('',#151555,#151563,#151565,.T.); +#151563 = VERTEX_POINT('',#151564); +#151564 = CARTESIAN_POINT('',(180.510546,-110.256252,1.585)); +#151565 = LINE('',#151566,#151567); +#151566 = CARTESIAN_POINT('',(180.665612,-110.256252,1.585)); +#151567 = VECTOR('',#151568,1.); +#151568 = DIRECTION('',(-1.,0.,0.)); +#151569 = ORIENTED_EDGE('',*,*,#151570,.T.); +#151570 = EDGE_CURVE('',#151563,#151571,#151573,.T.); +#151571 = VERTEX_POINT('',#151572); +#151572 = CARTESIAN_POINT('',(180.377365,-110.389433,1.585)); +#151573 = CIRCLE('',#151574,0.18686440374); +#151574 = AXIS2_PLACEMENT_3D('',#151575,#151576,#151577); +#151575 = CARTESIAN_POINT('',(180.558082,-110.436969,1.585)); +#151576 = DIRECTION('',(0.,0.,1.)); +#151577 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#151578 = ORIENTED_EDGE('',*,*,#151579,.T.); +#151579 = EDGE_CURVE('',#151571,#151580,#151582,.T.); +#151580 = VERTEX_POINT('',#151581); +#151581 = CARTESIAN_POINT('',(180.377365,-110.639737,1.585)); +#151582 = LINE('',#151583,#151584); +#151583 = CARTESIAN_POINT('',(180.377365,-110.389433,1.585)); +#151584 = VECTOR('',#151585,1.); +#151585 = DIRECTION('',(0.,-1.,0.)); +#151586 = ORIENTED_EDGE('',*,*,#151587,.T.); +#151587 = EDGE_CURVE('',#151580,#151588,#151590,.T.); +#151588 = VERTEX_POINT('',#151589); +#151589 = CARTESIAN_POINT('',(180.510546,-110.772919,1.585)); +#151590 = CIRCLE('',#151591,0.186867373533); +#151591 = AXIS2_PLACEMENT_3D('',#151592,#151593,#151594); +#151592 = CARTESIAN_POINT('',(180.55808471388,-110.592199643,1.585)); +#151593 = DIRECTION('',(0.,0.,1.)); +#151594 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#151595 = ORIENTED_EDGE('',*,*,#151596,.T.); +#151596 = EDGE_CURVE('',#151588,#151597,#151599,.T.); +#151597 = VERTEX_POINT('',#151598); +#151598 = CARTESIAN_POINT('',(180.665612,-110.772919,1.585)); +#151599 = LINE('',#151600,#151601); +#151600 = CARTESIAN_POINT('',(180.510546,-110.772919,1.585)); +#151601 = VECTOR('',#151602,1.); +#151602 = DIRECTION('',(1.,0.,0.)); +#151603 = ORIENTED_EDGE('',*,*,#151604,.T.); +#151604 = EDGE_CURVE('',#151597,#151605,#151607,.T.); +#151605 = VERTEX_POINT('',#151606); +#151606 = CARTESIAN_POINT('',(180.703555,-110.753947,1.585)); +#151607 = LINE('',#151608,#151609); +#151608 = CARTESIAN_POINT('',(180.665612,-110.772919,1.585)); +#151609 = VECTOR('',#151610,1.); +#151610 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#151611 = ORIENTED_EDGE('',*,*,#151612,.T.); +#151612 = EDGE_CURVE('',#151605,#151553,#151613,.T.); +#151613 = LINE('',#151614,#151615); +#151614 = CARTESIAN_POINT('',(180.703555,-110.753947,1.585)); +#151615 = VECTOR('',#151616,1.); +#151616 = DIRECTION('',(0.,1.,0.)); +#151617 = PLANE('',#151618); +#151618 = AXIS2_PLACEMENT_3D('',#151619,#151620,#151621); +#151619 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151620 = DIRECTION('',(0.,0.,1.)); +#151621 = DIRECTION('',(1.,0.,-0.)); +#151622 = SHELL_BASED_SURFACE_MODEL('',(#151623)); +#151623 = OPEN_SHELL('',(#151624)); +#151624 = ADVANCED_FACE('',(#151625),#151694,.T.); +#151625 = FACE_BOUND('',#151626,.F.); +#151626 = EDGE_LOOP('',(#151627,#151638,#151646,#151654,#151663,#151671, + #151680,#151688)); +#151627 = ORIENTED_EDGE('',*,*,#151628,.T.); +#151628 = EDGE_CURVE('',#151629,#151631,#151633,.T.); +#151629 = VERTEX_POINT('',#151630); +#151630 = CARTESIAN_POINT('',(207.386217,-109.900139,1.585)); +#151631 = VERTEX_POINT('',#151632); +#151632 = CARTESIAN_POINT('',(207.50165,-109.9231,1.585)); +#151633 = CIRCLE('',#151634,6.000007318649E-02); +#151634 = AXIS2_PLACEMENT_3D('',#151635,#151636,#151637); +#151635 = CARTESIAN_POINT('',(207.44164992681,-109.9230998233,1.585)); +#151636 = DIRECTION('',(0.,0.,-1.)); +#151637 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#151638 = ORIENTED_EDGE('',*,*,#151639,.T.); +#151639 = EDGE_CURVE('',#151631,#151640,#151642,.T.); +#151640 = VERTEX_POINT('',#151641); +#151641 = CARTESIAN_POINT('',(207.50165,-111.1131,1.585)); +#151642 = LINE('',#151643,#151644); +#151643 = CARTESIAN_POINT('',(207.50165,-109.9231,1.585)); +#151644 = VECTOR('',#151645,1.); +#151645 = DIRECTION('',(0.,-1.,0.)); +#151646 = ORIENTED_EDGE('',*,*,#151647,.T.); +#151647 = EDGE_CURVE('',#151640,#151648,#151650,.T.); +#151648 = VERTEX_POINT('',#151649); +#151649 = CARTESIAN_POINT('',(208.69165,-111.1131,1.585)); +#151650 = LINE('',#151651,#151652); +#151651 = CARTESIAN_POINT('',(207.50165,-111.1131,1.585)); +#151652 = VECTOR('',#151653,1.); +#151653 = DIRECTION('',(1.,0.,0.)); +#151654 = ORIENTED_EDGE('',*,*,#151655,.T.); +#151655 = EDGE_CURVE('',#151648,#151656,#151658,.T.); +#151656 = VERTEX_POINT('',#151657); +#151657 = CARTESIAN_POINT('',(208.69165,-111.2331,1.585)); +#151658 = CIRCLE('',#151659,6.000000000042E-02); +#151659 = AXIS2_PLACEMENT_3D('',#151660,#151661,#151662); +#151660 = CARTESIAN_POINT('',(208.69165022558,-111.1731,1.585)); +#151661 = DIRECTION('',(0.,0.,-1.)); +#151662 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#151663 = ORIENTED_EDGE('',*,*,#151664,.T.); +#151664 = EDGE_CURVE('',#151656,#151665,#151667,.T.); +#151665 = VERTEX_POINT('',#151666); +#151666 = CARTESIAN_POINT('',(207.44165,-111.2331,1.585)); +#151667 = LINE('',#151668,#151669); +#151668 = CARTESIAN_POINT('',(208.69165,-111.2331,1.585)); +#151669 = VECTOR('',#151670,1.); +#151670 = DIRECTION('',(-1.,0.,0.)); +#151671 = ORIENTED_EDGE('',*,*,#151672,.T.); +#151672 = EDGE_CURVE('',#151665,#151673,#151675,.T.); +#151673 = VERTEX_POINT('',#151674); +#151674 = CARTESIAN_POINT('',(207.38165,-111.1731,1.585)); +#151675 = CIRCLE('',#151676,5.999932016257E-02); +#151676 = AXIS2_PLACEMENT_3D('',#151677,#151678,#151679); +#151677 = CARTESIAN_POINT('',(207.44164932015,-111.1731006798,1.585)); +#151678 = DIRECTION('',(0.,0.,-1.)); +#151679 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#151680 = ORIENTED_EDGE('',*,*,#151681,.T.); +#151681 = EDGE_CURVE('',#151673,#151682,#151684,.T.); +#151682 = VERTEX_POINT('',#151683); +#151683 = CARTESIAN_POINT('',(207.38165,-109.9231,1.585)); +#151684 = LINE('',#151685,#151686); +#151685 = CARTESIAN_POINT('',(207.38165,-111.1731,1.585)); +#151686 = VECTOR('',#151687,1.); +#151687 = DIRECTION('',(0.,1.,0.)); +#151688 = ORIENTED_EDGE('',*,*,#151689,.T.); +#151689 = EDGE_CURVE('',#151682,#151629,#151690,.T.); +#151690 = LINE('',#151691,#151692); +#151691 = CARTESIAN_POINT('',(207.38165,-109.9231,1.585)); +#151692 = VECTOR('',#151693,1.); +#151693 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#151694 = PLANE('',#151695); +#151695 = AXIS2_PLACEMENT_3D('',#151696,#151697,#151698); +#151696 = CARTESIAN_POINT('',(0.,0.,1.585)); +#151697 = DIRECTION('',(0.,0.,1.)); +#151698 = DIRECTION('',(1.,0.,-0.)); +#151699 = SHELL_BASED_SURFACE_MODEL('',(#151700)); +#151700 = OPEN_SHELL('',(#151701)); +#151701 = ADVANCED_FACE('',(#151702,#151772,#151956,#152040,#152074, + #152108),#152142,.T.); +#151702 = FACE_BOUND('',#151703,.F.); +#151703 = EDGE_LOOP('',(#151704,#151715,#151723,#151732,#151740,#151749, + #151757,#151766)); +#151704 = ORIENTED_EDGE('',*,*,#151705,.T.); +#151705 = EDGE_CURVE('',#151706,#151708,#151710,.T.); +#151706 = VERTEX_POINT('',#151707); +#151707 = CARTESIAN_POINT('',(207.67165,-100.7631,1.585)); +#151708 = VERTEX_POINT('',#151709); +#151709 = CARTESIAN_POINT('',(207.73165,-100.7031,1.585)); +#151710 = CIRCLE('',#151711,5.999932016262E-02); +#151711 = AXIS2_PLACEMENT_3D('',#151712,#151713,#151714); +#151712 = CARTESIAN_POINT('',(207.73164932015,-100.7630993201,1.585)); +#151713 = DIRECTION('',(0.,0.,-1.)); +#151714 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#151715 = ORIENTED_EDGE('',*,*,#151716,.T.); +#151716 = EDGE_CURVE('',#151708,#151717,#151719,.T.); +#151717 = VERTEX_POINT('',#151718); +#151718 = CARTESIAN_POINT('',(213.70165,-100.7031,1.585)); +#151719 = LINE('',#151720,#151721); +#151720 = CARTESIAN_POINT('',(207.73165,-100.7031,1.585)); +#151721 = VECTOR('',#151722,1.); +#151722 = DIRECTION('',(1.,0.,0.)); +#151723 = ORIENTED_EDGE('',*,*,#151724,.T.); +#151724 = EDGE_CURVE('',#151717,#151725,#151727,.T.); +#151725 = VERTEX_POINT('',#151726); +#151726 = CARTESIAN_POINT('',(213.76165,-100.7631,1.585)); +#151727 = CIRCLE('',#151728,5.999932016257E-02); +#151728 = AXIS2_PLACEMENT_3D('',#151729,#151730,#151731); +#151729 = CARTESIAN_POINT('',(213.70165067984,-100.7630993201,1.585)); +#151730 = DIRECTION('',(0.,0.,-1.)); +#151731 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#151732 = ORIENTED_EDGE('',*,*,#151733,.T.); +#151733 = EDGE_CURVE('',#151725,#151734,#151736,.T.); +#151734 = VERTEX_POINT('',#151735); +#151735 = CARTESIAN_POINT('',(213.76165,-110.8831,1.585)); +#151736 = LINE('',#151737,#151738); +#151737 = CARTESIAN_POINT('',(213.76165,-100.7631,1.585)); +#151738 = VECTOR('',#151739,1.); +#151739 = DIRECTION('',(0.,-1.,0.)); +#151740 = ORIENTED_EDGE('',*,*,#151741,.T.); +#151741 = EDGE_CURVE('',#151734,#151742,#151744,.T.); +#151742 = VERTEX_POINT('',#151743); +#151743 = CARTESIAN_POINT('',(213.70165,-110.9431,1.585)); +#151744 = CIRCLE('',#151745,5.999932016265E-02); +#151745 = AXIS2_PLACEMENT_3D('',#151746,#151747,#151748); +#151746 = CARTESIAN_POINT('',(213.70165067984,-110.8831006798,1.585)); +#151747 = DIRECTION('',(0.,0.,-1.)); +#151748 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#151749 = ORIENTED_EDGE('',*,*,#151750,.T.); +#151750 = EDGE_CURVE('',#151742,#151751,#151753,.T.); +#151751 = VERTEX_POINT('',#151752); +#151752 = CARTESIAN_POINT('',(207.73165,-110.9431,1.585)); +#151753 = LINE('',#151754,#151755); +#151754 = CARTESIAN_POINT('',(213.70165,-110.9431,1.585)); +#151755 = VECTOR('',#151756,1.); +#151756 = DIRECTION('',(-1.,0.,0.)); +#151757 = ORIENTED_EDGE('',*,*,#151758,.T.); +#151758 = EDGE_CURVE('',#151751,#151759,#151761,.T.); +#151759 = VERTEX_POINT('',#151760); +#151760 = CARTESIAN_POINT('',(207.67165,-110.8831,1.585)); +#151761 = CIRCLE('',#151762,5.999932016256E-02); +#151762 = AXIS2_PLACEMENT_3D('',#151763,#151764,#151765); +#151763 = CARTESIAN_POINT('',(207.73164932015,-110.8831006798,1.585)); +#151764 = DIRECTION('',(0.,0.,-1.)); +#151765 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#151766 = ORIENTED_EDGE('',*,*,#151767,.T.); +#151767 = EDGE_CURVE('',#151759,#151706,#151768,.T.); +#151768 = LINE('',#151769,#151770); +#151769 = CARTESIAN_POINT('',(207.67165,-110.8831,1.585)); +#151770 = VECTOR('',#151771,1.); +#151771 = DIRECTION('',(0.,1.,0.)); +#151772 = FACE_BOUND('',#151773,.F.); +#151773 = EDGE_LOOP('',(#151774,#151785,#151793,#151801,#151809,#151818, + #151826,#151834,#151842,#151851,#151859,#151868,#151876,#151884, + #151892,#151901,#151909,#151917,#151925,#151934,#151942,#151950)); +#151774 = ORIENTED_EDGE('',*,*,#151775,.T.); +#151775 = EDGE_CURVE('',#151776,#151778,#151780,.T.); +#151776 = VERTEX_POINT('',#151777); +#151777 = CARTESIAN_POINT('',(209.99165,-101.5831,1.585)); +#151778 = VERTEX_POINT('',#151779); +#151779 = CARTESIAN_POINT('',(209.93165,-101.5231,1.585)); +#151780 = CIRCLE('',#151781,5.999932016264E-02); +#151781 = AXIS2_PLACEMENT_3D('',#151782,#151783,#151784); +#151782 = CARTESIAN_POINT('',(209.99164932015,-101.5231006798,1.585)); +#151783 = DIRECTION('',(0.,0.,-1.)); +#151784 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#151785 = ORIENTED_EDGE('',*,*,#151786,.T.); +#151786 = EDGE_CURVE('',#151778,#151787,#151789,.T.); +#151787 = VERTEX_POINT('',#151788); +#151788 = CARTESIAN_POINT('',(209.93165,-100.8231,1.585)); +#151789 = LINE('',#151790,#151791); +#151790 = CARTESIAN_POINT('',(209.93165,-101.5231,1.585)); +#151791 = VECTOR('',#151792,1.); +#151792 = DIRECTION('',(0.,1.,0.)); +#151793 = ORIENTED_EDGE('',*,*,#151794,.T.); +#151794 = EDGE_CURVE('',#151787,#151795,#151797,.T.); +#151795 = VERTEX_POINT('',#151796); +#151796 = CARTESIAN_POINT('',(208.55165,-100.8231,1.585)); +#151797 = LINE('',#151798,#151799); +#151798 = CARTESIAN_POINT('',(209.93165,-100.8231,1.585)); +#151799 = VECTOR('',#151800,1.); +#151800 = DIRECTION('',(-1.,0.,0.)); +#151801 = ORIENTED_EDGE('',*,*,#151802,.T.); +#151802 = EDGE_CURVE('',#151795,#151803,#151805,.T.); +#151803 = VERTEX_POINT('',#151804); +#151804 = CARTESIAN_POINT('',(208.55165,-102.5731,1.585)); +#151805 = LINE('',#151806,#151807); +#151806 = CARTESIAN_POINT('',(208.55165,-100.8231,1.585)); +#151807 = VECTOR('',#151808,1.); +#151808 = DIRECTION('',(0.,-1.,0.)); +#151809 = ORIENTED_EDGE('',*,*,#151810,.T.); +#151810 = EDGE_CURVE('',#151803,#151811,#151813,.T.); +#151811 = VERTEX_POINT('',#151812); +#151812 = CARTESIAN_POINT('',(208.49165,-102.6331,1.585)); +#151813 = CIRCLE('',#151814,5.999932016262E-02); +#151814 = AXIS2_PLACEMENT_3D('',#151815,#151816,#151817); +#151815 = CARTESIAN_POINT('',(208.49165067984,-102.5731006798,1.585)); +#151816 = DIRECTION('',(0.,0.,-1.)); +#151817 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#151818 = ORIENTED_EDGE('',*,*,#151819,.T.); +#151819 = EDGE_CURVE('',#151811,#151820,#151822,.T.); +#151820 = VERTEX_POINT('',#151821); +#151821 = CARTESIAN_POINT('',(207.79165,-102.6331,1.585)); +#151822 = LINE('',#151823,#151824); +#151823 = CARTESIAN_POINT('',(208.49165,-102.6331,1.585)); +#151824 = VECTOR('',#151825,1.); +#151825 = DIRECTION('',(-1.,0.,0.)); +#151826 = ORIENTED_EDGE('',*,*,#151827,.T.); +#151827 = EDGE_CURVE('',#151820,#151828,#151830,.T.); +#151828 = VERTEX_POINT('',#151829); +#151829 = CARTESIAN_POINT('',(207.79165,-104.0131,1.585)); +#151830 = LINE('',#151831,#151832); +#151831 = CARTESIAN_POINT('',(207.79165,-102.6331,1.585)); +#151832 = VECTOR('',#151833,1.); +#151833 = DIRECTION('',(0.,-1.,0.)); +#151834 = ORIENTED_EDGE('',*,*,#151835,.T.); +#151835 = EDGE_CURVE('',#151828,#151836,#151838,.T.); +#151836 = VERTEX_POINT('',#151837); +#151837 = CARTESIAN_POINT('',(208.49165,-104.0131,1.585)); +#151838 = LINE('',#151839,#151840); +#151839 = CARTESIAN_POINT('',(207.79165,-104.0131,1.585)); +#151840 = VECTOR('',#151841,1.); +#151841 = DIRECTION('',(1.,0.,0.)); +#151842 = ORIENTED_EDGE('',*,*,#151843,.T.); +#151843 = EDGE_CURVE('',#151836,#151844,#151846,.T.); +#151844 = VERTEX_POINT('',#151845); +#151845 = CARTESIAN_POINT('',(208.55165,-104.0731,1.585)); +#151846 = CIRCLE('',#151847,5.999932016262E-02); +#151847 = AXIS2_PLACEMENT_3D('',#151848,#151849,#151850); +#151848 = CARTESIAN_POINT('',(208.49165067984,-104.0730993201,1.585)); +#151849 = DIRECTION('',(0.,0.,-1.)); +#151850 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#151851 = ORIENTED_EDGE('',*,*,#151852,.T.); +#151852 = EDGE_CURVE('',#151844,#151853,#151855,.T.); +#151853 = VERTEX_POINT('',#151854); +#151854 = CARTESIAN_POINT('',(208.55165,-107.5731,1.585)); +#151855 = LINE('',#151856,#151857); +#151856 = CARTESIAN_POINT('',(208.55165,-104.0731,1.585)); +#151857 = VECTOR('',#151858,1.); +#151858 = DIRECTION('',(0.,-1.,0.)); +#151859 = ORIENTED_EDGE('',*,*,#151860,.T.); +#151860 = EDGE_CURVE('',#151853,#151861,#151863,.T.); +#151861 = VERTEX_POINT('',#151862); +#151862 = CARTESIAN_POINT('',(208.49165,-107.6331,1.585)); +#151863 = CIRCLE('',#151864,5.999932016262E-02); +#151864 = AXIS2_PLACEMENT_3D('',#151865,#151866,#151867); +#151865 = CARTESIAN_POINT('',(208.49165067984,-107.5731006798,1.585)); +#151866 = DIRECTION('',(0.,0.,-1.)); +#151867 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#151868 = ORIENTED_EDGE('',*,*,#151869,.T.); +#151869 = EDGE_CURVE('',#151861,#151870,#151872,.T.); +#151870 = VERTEX_POINT('',#151871); +#151871 = CARTESIAN_POINT('',(207.79165,-107.6331,1.585)); +#151872 = LINE('',#151873,#151874); +#151873 = CARTESIAN_POINT('',(208.49165,-107.6331,1.585)); +#151874 = VECTOR('',#151875,1.); +#151875 = DIRECTION('',(-1.,0.,0.)); +#151876 = ORIENTED_EDGE('',*,*,#151877,.T.); +#151877 = EDGE_CURVE('',#151870,#151878,#151880,.T.); +#151878 = VERTEX_POINT('',#151879); +#151879 = CARTESIAN_POINT('',(207.79165,-109.0131,1.585)); +#151880 = LINE('',#151881,#151882); +#151881 = CARTESIAN_POINT('',(207.79165,-107.6331,1.585)); +#151882 = VECTOR('',#151883,1.); +#151883 = DIRECTION('',(0.,-1.,0.)); +#151884 = ORIENTED_EDGE('',*,*,#151885,.T.); +#151885 = EDGE_CURVE('',#151878,#151886,#151888,.T.); +#151886 = VERTEX_POINT('',#151887); +#151887 = CARTESIAN_POINT('',(208.49165,-109.0131,1.585)); +#151888 = LINE('',#151889,#151890); +#151889 = CARTESIAN_POINT('',(207.79165,-109.0131,1.585)); +#151890 = VECTOR('',#151891,1.); +#151891 = DIRECTION('',(1.,0.,0.)); +#151892 = ORIENTED_EDGE('',*,*,#151893,.T.); +#151893 = EDGE_CURVE('',#151886,#151894,#151896,.T.); +#151894 = VERTEX_POINT('',#151895); +#151895 = CARTESIAN_POINT('',(208.55165,-109.0731,1.585)); +#151896 = CIRCLE('',#151897,5.999932016262E-02); +#151897 = AXIS2_PLACEMENT_3D('',#151898,#151899,#151900); +#151898 = CARTESIAN_POINT('',(208.49165067984,-109.0730993201,1.585)); +#151899 = DIRECTION('',(0.,0.,-1.)); +#151900 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#151901 = ORIENTED_EDGE('',*,*,#151902,.T.); +#151902 = EDGE_CURVE('',#151894,#151903,#151905,.T.); +#151903 = VERTEX_POINT('',#151904); +#151904 = CARTESIAN_POINT('',(208.55165,-110.8231,1.585)); +#151905 = LINE('',#151906,#151907); +#151906 = CARTESIAN_POINT('',(208.55165,-109.0731,1.585)); +#151907 = VECTOR('',#151908,1.); +#151908 = DIRECTION('',(0.,-1.,0.)); +#151909 = ORIENTED_EDGE('',*,*,#151910,.T.); +#151910 = EDGE_CURVE('',#151903,#151911,#151913,.T.); +#151911 = VERTEX_POINT('',#151912); +#151912 = CARTESIAN_POINT('',(209.93165,-110.8231,1.585)); +#151913 = LINE('',#151914,#151915); +#151914 = CARTESIAN_POINT('',(208.55165,-110.8231,1.585)); +#151915 = VECTOR('',#151916,1.); +#151916 = DIRECTION('',(1.,0.,0.)); +#151917 = ORIENTED_EDGE('',*,*,#151918,.T.); +#151918 = EDGE_CURVE('',#151911,#151919,#151921,.T.); +#151919 = VERTEX_POINT('',#151920); +#151920 = CARTESIAN_POINT('',(209.93165,-110.1231,1.585)); +#151921 = LINE('',#151922,#151923); +#151922 = CARTESIAN_POINT('',(209.93165,-110.8231,1.585)); +#151923 = VECTOR('',#151924,1.); +#151924 = DIRECTION('',(0.,1.,0.)); +#151925 = ORIENTED_EDGE('',*,*,#151926,.T.); +#151926 = EDGE_CURVE('',#151919,#151927,#151929,.T.); +#151927 = VERTEX_POINT('',#151928); +#151928 = CARTESIAN_POINT('',(209.99165,-110.0631,1.585)); +#151929 = CIRCLE('',#151930,5.999932016261E-02); +#151930 = AXIS2_PLACEMENT_3D('',#151931,#151932,#151933); +#151931 = CARTESIAN_POINT('',(209.99164932015,-110.1230993201,1.585)); +#151932 = DIRECTION('',(0.,0.,-1.)); +#151933 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#151934 = ORIENTED_EDGE('',*,*,#151935,.T.); +#151935 = EDGE_CURVE('',#151927,#151936,#151938,.T.); +#151936 = VERTEX_POINT('',#151937); +#151937 = CARTESIAN_POINT('',(212.88165,-110.0631,1.585)); +#151938 = LINE('',#151939,#151940); +#151939 = CARTESIAN_POINT('',(209.99165,-110.0631,1.585)); +#151940 = VECTOR('',#151941,1.); +#151941 = DIRECTION('',(1.,0.,0.)); +#151942 = ORIENTED_EDGE('',*,*,#151943,.T.); +#151943 = EDGE_CURVE('',#151936,#151944,#151946,.T.); +#151944 = VERTEX_POINT('',#151945); +#151945 = CARTESIAN_POINT('',(212.88165,-101.5831,1.585)); +#151946 = LINE('',#151947,#151948); +#151947 = CARTESIAN_POINT('',(212.88165,-110.0631,1.585)); +#151948 = VECTOR('',#151949,1.); +#151949 = DIRECTION('',(0.,1.,0.)); +#151950 = ORIENTED_EDGE('',*,*,#151951,.T.); +#151951 = EDGE_CURVE('',#151944,#151776,#151952,.T.); +#151952 = LINE('',#151953,#151954); +#151953 = CARTESIAN_POINT('',(212.88165,-101.5831,1.585)); +#151954 = VECTOR('',#151955,1.); +#151955 = DIRECTION('',(-1.,0.,0.)); +#151956 = FACE_BOUND('',#151957,.F.); +#151957 = EDGE_LOOP('',(#151958,#151968,#151976,#151984,#151992,#152001, + #152009,#152018,#152026,#152034)); +#151958 = ORIENTED_EDGE('',*,*,#151959,.T.); +#151959 = EDGE_CURVE('',#151960,#151962,#151964,.T.); +#151960 = VERTEX_POINT('',#151961); +#151961 = CARTESIAN_POINT('',(213.64165,-110.8231,1.585)); +#151962 = VERTEX_POINT('',#151963); +#151963 = CARTESIAN_POINT('',(213.64165,-100.8231,1.585)); +#151964 = LINE('',#151965,#151966); +#151965 = CARTESIAN_POINT('',(213.64165,-110.8231,1.585)); +#151966 = VECTOR('',#151967,1.); +#151967 = DIRECTION('',(0.,1.,0.)); +#151968 = ORIENTED_EDGE('',*,*,#151969,.T.); +#151969 = EDGE_CURVE('',#151962,#151970,#151972,.T.); +#151970 = VERTEX_POINT('',#151971); +#151971 = CARTESIAN_POINT('',(210.05165,-100.8231,1.585)); +#151972 = LINE('',#151973,#151974); +#151973 = CARTESIAN_POINT('',(213.64165,-100.8231,1.585)); +#151974 = VECTOR('',#151975,1.); +#151975 = DIRECTION('',(-1.,0.,0.)); +#151976 = ORIENTED_EDGE('',*,*,#151977,.T.); +#151977 = EDGE_CURVE('',#151970,#151978,#151980,.T.); +#151978 = VERTEX_POINT('',#151979); +#151979 = CARTESIAN_POINT('',(210.05165,-101.4631,1.585)); +#151980 = LINE('',#151981,#151982); +#151981 = CARTESIAN_POINT('',(210.05165,-100.8231,1.585)); +#151982 = VECTOR('',#151983,1.); +#151983 = DIRECTION('',(0.,-1.,0.)); +#151984 = ORIENTED_EDGE('',*,*,#151985,.T.); +#151985 = EDGE_CURVE('',#151978,#151986,#151988,.T.); +#151986 = VERTEX_POINT('',#151987); +#151987 = CARTESIAN_POINT('',(212.94165,-101.4631,1.585)); +#151988 = LINE('',#151989,#151990); +#151989 = CARTESIAN_POINT('',(210.05165,-101.4631,1.585)); +#151990 = VECTOR('',#151991,1.); +#151991 = DIRECTION('',(1.,0.,0.)); +#151992 = ORIENTED_EDGE('',*,*,#151993,.T.); +#151993 = EDGE_CURVE('',#151986,#151994,#151996,.T.); +#151994 = VERTEX_POINT('',#151995); +#151995 = CARTESIAN_POINT('',(213.00165,-101.5231,1.585)); +#151996 = CIRCLE('',#151997,5.999932016268E-02); +#151997 = AXIS2_PLACEMENT_3D('',#151998,#151999,#152000); +#151998 = CARTESIAN_POINT('',(212.94165067984,-101.5230993201,1.585)); +#151999 = DIRECTION('',(0.,0.,-1.)); +#152000 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#152001 = ORIENTED_EDGE('',*,*,#152002,.T.); +#152002 = EDGE_CURVE('',#151994,#152003,#152005,.T.); +#152003 = VERTEX_POINT('',#152004); +#152004 = CARTESIAN_POINT('',(213.00165,-110.1231,1.585)); +#152005 = LINE('',#152006,#152007); +#152006 = CARTESIAN_POINT('',(213.00165,-101.5231,1.585)); +#152007 = VECTOR('',#152008,1.); +#152008 = DIRECTION('',(0.,-1.,0.)); +#152009 = ORIENTED_EDGE('',*,*,#152010,.T.); +#152010 = EDGE_CURVE('',#152003,#152011,#152013,.T.); +#152011 = VERTEX_POINT('',#152012); +#152012 = CARTESIAN_POINT('',(212.94165,-110.1831,1.585)); +#152013 = CIRCLE('',#152014,5.999932016262E-02); +#152014 = AXIS2_PLACEMENT_3D('',#152015,#152016,#152017); +#152015 = CARTESIAN_POINT('',(212.94165067984,-110.1231006798,1.585)); +#152016 = DIRECTION('',(0.,0.,-1.)); +#152017 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#152018 = ORIENTED_EDGE('',*,*,#152019,.T.); +#152019 = EDGE_CURVE('',#152011,#152020,#152022,.T.); +#152020 = VERTEX_POINT('',#152021); +#152021 = CARTESIAN_POINT('',(210.05165,-110.1831,1.585)); +#152022 = LINE('',#152023,#152024); +#152023 = CARTESIAN_POINT('',(212.94165,-110.1831,1.585)); +#152024 = VECTOR('',#152025,1.); +#152025 = DIRECTION('',(-1.,0.,0.)); +#152026 = ORIENTED_EDGE('',*,*,#152027,.T.); +#152027 = EDGE_CURVE('',#152020,#152028,#152030,.T.); +#152028 = VERTEX_POINT('',#152029); +#152029 = CARTESIAN_POINT('',(210.05165,-110.8231,1.585)); +#152030 = LINE('',#152031,#152032); +#152031 = CARTESIAN_POINT('',(210.05165,-110.1831,1.585)); +#152032 = VECTOR('',#152033,1.); +#152033 = DIRECTION('',(0.,-1.,0.)); +#152034 = ORIENTED_EDGE('',*,*,#152035,.T.); +#152035 = EDGE_CURVE('',#152028,#151960,#152036,.T.); +#152036 = LINE('',#152037,#152038); +#152037 = CARTESIAN_POINT('',(210.05165,-110.8231,1.585)); +#152038 = VECTOR('',#152039,1.); +#152039 = DIRECTION('',(1.,0.,0.)); +#152040 = FACE_BOUND('',#152041,.F.); +#152041 = EDGE_LOOP('',(#152042,#152052,#152060,#152068)); +#152042 = ORIENTED_EDGE('',*,*,#152043,.T.); +#152043 = EDGE_CURVE('',#152044,#152046,#152048,.T.); +#152044 = VERTEX_POINT('',#152045); +#152045 = CARTESIAN_POINT('',(208.43165,-110.8131,1.585)); +#152046 = VERTEX_POINT('',#152047); +#152047 = CARTESIAN_POINT('',(208.43165,-109.1331,1.585)); +#152048 = LINE('',#152049,#152050); +#152049 = CARTESIAN_POINT('',(208.43165,-110.8131,1.585)); +#152050 = VECTOR('',#152051,1.); +#152051 = DIRECTION('',(0.,1.,0.)); +#152052 = ORIENTED_EDGE('',*,*,#152053,.T.); +#152053 = EDGE_CURVE('',#152046,#152054,#152056,.T.); +#152054 = VERTEX_POINT('',#152055); +#152055 = CARTESIAN_POINT('',(207.80165,-109.1331,1.585)); +#152056 = LINE('',#152057,#152058); +#152057 = CARTESIAN_POINT('',(208.43165,-109.1331,1.585)); +#152058 = VECTOR('',#152059,1.); +#152059 = DIRECTION('',(-1.,0.,0.)); +#152060 = ORIENTED_EDGE('',*,*,#152061,.T.); +#152061 = EDGE_CURVE('',#152054,#152062,#152064,.T.); +#152062 = VERTEX_POINT('',#152063); +#152063 = CARTESIAN_POINT('',(207.80165,-110.8131,1.585)); +#152064 = LINE('',#152065,#152066); +#152065 = CARTESIAN_POINT('',(207.80165,-109.1331,1.585)); +#152066 = VECTOR('',#152067,1.); +#152067 = DIRECTION('',(0.,-1.,0.)); +#152068 = ORIENTED_EDGE('',*,*,#152069,.T.); +#152069 = EDGE_CURVE('',#152062,#152044,#152070,.T.); +#152070 = LINE('',#152071,#152072); +#152071 = CARTESIAN_POINT('',(207.80165,-110.8131,1.585)); +#152072 = VECTOR('',#152073,1.); +#152073 = DIRECTION('',(1.,0.,0.)); +#152074 = FACE_BOUND('',#152075,.F.); +#152075 = EDGE_LOOP('',(#152076,#152086,#152094,#152102)); +#152076 = ORIENTED_EDGE('',*,*,#152077,.T.); +#152077 = EDGE_CURVE('',#152078,#152080,#152082,.T.); +#152078 = VERTEX_POINT('',#152079); +#152079 = CARTESIAN_POINT('',(208.43165,-107.5131,1.585)); +#152080 = VERTEX_POINT('',#152081); +#152081 = CARTESIAN_POINT('',(208.43165,-104.1331,1.585)); +#152082 = LINE('',#152083,#152084); +#152083 = CARTESIAN_POINT('',(208.43165,-107.5131,1.585)); +#152084 = VECTOR('',#152085,1.); +#152085 = DIRECTION('',(0.,1.,0.)); +#152086 = ORIENTED_EDGE('',*,*,#152087,.T.); +#152087 = EDGE_CURVE('',#152080,#152088,#152090,.T.); +#152088 = VERTEX_POINT('',#152089); +#152089 = CARTESIAN_POINT('',(207.80165,-104.1331,1.585)); +#152090 = LINE('',#152091,#152092); +#152091 = CARTESIAN_POINT('',(208.43165,-104.1331,1.585)); +#152092 = VECTOR('',#152093,1.); +#152093 = DIRECTION('',(-1.,0.,0.)); +#152094 = ORIENTED_EDGE('',*,*,#152095,.T.); +#152095 = EDGE_CURVE('',#152088,#152096,#152098,.T.); +#152096 = VERTEX_POINT('',#152097); +#152097 = CARTESIAN_POINT('',(207.80165,-107.5131,1.585)); +#152098 = LINE('',#152099,#152100); +#152099 = CARTESIAN_POINT('',(207.80165,-104.1331,1.585)); +#152100 = VECTOR('',#152101,1.); +#152101 = DIRECTION('',(0.,-1.,0.)); +#152102 = ORIENTED_EDGE('',*,*,#152103,.T.); +#152103 = EDGE_CURVE('',#152096,#152078,#152104,.T.); +#152104 = LINE('',#152105,#152106); +#152105 = CARTESIAN_POINT('',(207.80165,-107.5131,1.585)); +#152106 = VECTOR('',#152107,1.); +#152107 = DIRECTION('',(1.,0.,0.)); +#152108 = FACE_BOUND('',#152109,.F.); +#152109 = EDGE_LOOP('',(#152110,#152120,#152128,#152136)); +#152110 = ORIENTED_EDGE('',*,*,#152111,.T.); +#152111 = EDGE_CURVE('',#152112,#152114,#152116,.T.); +#152112 = VERTEX_POINT('',#152113); +#152113 = CARTESIAN_POINT('',(208.43165,-102.5131,1.585)); +#152114 = VERTEX_POINT('',#152115); +#152115 = CARTESIAN_POINT('',(208.43165,-100.8331,1.585)); +#152116 = LINE('',#152117,#152118); +#152117 = CARTESIAN_POINT('',(208.43165,-102.5131,1.585)); +#152118 = VECTOR('',#152119,1.); +#152119 = DIRECTION('',(0.,1.,0.)); +#152120 = ORIENTED_EDGE('',*,*,#152121,.T.); +#152121 = EDGE_CURVE('',#152114,#152122,#152124,.T.); +#152122 = VERTEX_POINT('',#152123); +#152123 = CARTESIAN_POINT('',(207.80165,-100.8331,1.585)); +#152124 = LINE('',#152125,#152126); +#152125 = CARTESIAN_POINT('',(208.43165,-100.8331,1.585)); +#152126 = VECTOR('',#152127,1.); +#152127 = DIRECTION('',(-1.,0.,0.)); +#152128 = ORIENTED_EDGE('',*,*,#152129,.T.); +#152129 = EDGE_CURVE('',#152122,#152130,#152132,.T.); +#152130 = VERTEX_POINT('',#152131); +#152131 = CARTESIAN_POINT('',(207.80165,-102.5131,1.585)); +#152132 = LINE('',#152133,#152134); +#152133 = CARTESIAN_POINT('',(207.80165,-100.8331,1.585)); +#152134 = VECTOR('',#152135,1.); +#152135 = DIRECTION('',(0.,-1.,0.)); +#152136 = ORIENTED_EDGE('',*,*,#152137,.T.); +#152137 = EDGE_CURVE('',#152130,#152112,#152138,.T.); +#152138 = LINE('',#152139,#152140); +#152139 = CARTESIAN_POINT('',(207.80165,-102.5131,1.585)); +#152140 = VECTOR('',#152141,1.); +#152141 = DIRECTION('',(1.,0.,0.)); +#152142 = PLANE('',#152143); +#152143 = AXIS2_PLACEMENT_3D('',#152144,#152145,#152146); +#152144 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152145 = DIRECTION('',(0.,0.,1.)); +#152146 = DIRECTION('',(1.,0.,-0.)); +#152147 = SHELL_BASED_SURFACE_MODEL('',(#152148)); +#152148 = OPEN_SHELL('',(#152149)); +#152149 = ADVANCED_FACE('',(#152150),#152309,.T.); +#152150 = FACE_BOUND('',#152151,.F.); +#152151 = EDGE_LOOP('',(#152152,#152163,#152171,#152179,#152187,#152195, + #152203,#152211,#152220,#152228,#152237,#152245,#152253,#152261, + #152270,#152278,#152286,#152294,#152303)); +#152152 = ORIENTED_EDGE('',*,*,#152153,.T.); +#152153 = EDGE_CURVE('',#152154,#152156,#152158,.T.); +#152154 = VERTEX_POINT('',#152155); +#152155 = CARTESIAN_POINT('',(181.221205,-109.828456,1.585)); +#152156 = VERTEX_POINT('',#152157); +#152157 = CARTESIAN_POINT('',(181.7306,-109.837786,1.585)); +#152158 = CIRCLE('',#152159,0.450326844012); +#152159 = AXIS2_PLACEMENT_3D('',#152160,#152161,#152162); +#152160 = CARTESIAN_POINT('',(181.4691020301,-110.2044098919,1.585)); +#152161 = DIRECTION('',(0.,0.,-1.)); +#152162 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#152163 = ORIENTED_EDGE('',*,*,#152164,.T.); +#152164 = EDGE_CURVE('',#152156,#152165,#152167,.T.); +#152165 = VERTEX_POINT('',#152166); +#152166 = CARTESIAN_POINT('',(181.794053,-109.903316,1.585)); +#152167 = LINE('',#152168,#152169); +#152168 = CARTESIAN_POINT('',(181.7306,-109.837786,1.585)); +#152169 = VECTOR('',#152170,1.); +#152170 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#152171 = ORIENTED_EDGE('',*,*,#152172,.T.); +#152172 = EDGE_CURVE('',#152165,#152173,#152175,.T.); +#152173 = VERTEX_POINT('',#152174); +#152174 = CARTESIAN_POINT('',(181.852114,-110.023763,1.585)); +#152175 = LINE('',#152176,#152177); +#152176 = CARTESIAN_POINT('',(181.794053,-109.903316,1.585)); +#152177 = VECTOR('',#152178,1.); +#152178 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#152179 = ORIENTED_EDGE('',*,*,#152180,.T.); +#152180 = EDGE_CURVE('',#152173,#152181,#152183,.T.); +#152181 = VERTEX_POINT('',#152182); +#152182 = CARTESIAN_POINT('',(181.851355,-110.150095,1.585)); +#152183 = LINE('',#152184,#152185); +#152184 = CARTESIAN_POINT('',(181.852114,-110.023763,1.585)); +#152185 = VECTOR('',#152186,1.); +#152186 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#152187 = ORIENTED_EDGE('',*,*,#152188,.T.); +#152188 = EDGE_CURVE('',#152181,#152189,#152191,.T.); +#152189 = VERTEX_POINT('',#152190); +#152190 = CARTESIAN_POINT('',(181.793297,-110.318158,1.585)); +#152191 = LINE('',#152192,#152193); +#152192 = CARTESIAN_POINT('',(181.851355,-110.150095,1.585)); +#152193 = VECTOR('',#152194,1.); +#152194 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#152195 = ORIENTED_EDGE('',*,*,#152196,.T.); +#152196 = EDGE_CURVE('',#152189,#152197,#152199,.T.); +#152197 = VERTEX_POINT('',#152198); +#152198 = CARTESIAN_POINT('',(181.340574,-110.772919,1.585)); +#152199 = LINE('',#152200,#152201); +#152200 = CARTESIAN_POINT('',(181.793297,-110.318158,1.585)); +#152201 = VECTOR('',#152202,1.); +#152202 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#152203 = ORIENTED_EDGE('',*,*,#152204,.T.); +#152204 = EDGE_CURVE('',#152197,#152205,#152207,.T.); +#152205 = VERTEX_POINT('',#152206); +#152206 = CARTESIAN_POINT('',(181.793187,-110.77436,1.585)); +#152207 = LINE('',#152208,#152209); +#152208 = CARTESIAN_POINT('',(181.340574,-110.772919,1.585)); +#152209 = VECTOR('',#152210,1.); +#152210 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#152211 = ORIENTED_EDGE('',*,*,#152212,.T.); +#152212 = EDGE_CURVE('',#152205,#152213,#152215,.T.); +#152213 = VERTEX_POINT('',#152214); +#152214 = CARTESIAN_POINT('',(181.778555,-110.922919,1.585)); +#152215 = CIRCLE('',#152216,7.500006711463E-02); +#152216 = AXIS2_PLACEMENT_3D('',#152217,#152218,#152219); +#152217 = CARTESIAN_POINT('',(181.77855506711,-110.8479189328,1.585)); +#152218 = DIRECTION('',(0.,0.,-1.)); +#152219 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#152220 = ORIENTED_EDGE('',*,*,#152221,.T.); +#152221 = EDGE_CURVE('',#152213,#152222,#152224,.T.); +#152222 = VERTEX_POINT('',#152223); +#152223 = CARTESIAN_POINT('',(181.144876,-110.921478,1.585)); +#152224 = LINE('',#152225,#152226); +#152225 = CARTESIAN_POINT('',(181.778555,-110.922919,1.585)); +#152226 = VECTOR('',#152227,1.); +#152227 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#152228 = ORIENTED_EDGE('',*,*,#152229,.T.); +#152229 = EDGE_CURVE('',#152222,#152230,#152232,.T.); +#152230 = VERTEX_POINT('',#152231); +#152231 = CARTESIAN_POINT('',(181.106475,-110.794886,1.585)); +#152232 = CIRCLE('',#152233,7.500021013109E-02); +#152233 = AXIS2_PLACEMENT_3D('',#152234,#152235,#152236); +#152234 = CARTESIAN_POINT('',(181.1595083167,-110.8479189976,1.585)); +#152235 = DIRECTION('',(0.,0.,-1.)); +#152236 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#152237 = ORIENTED_EDGE('',*,*,#152238,.T.); +#152238 = EDGE_CURVE('',#152230,#152239,#152241,.T.); +#152239 = VERTEX_POINT('',#152240); +#152240 = CARTESIAN_POINT('',(181.665383,-110.235976,1.585)); +#152241 = LINE('',#152242,#152243); +#152242 = CARTESIAN_POINT('',(181.106475,-110.794886,1.585)); +#152243 = VECTOR('',#152244,1.); +#152244 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#152245 = ORIENTED_EDGE('',*,*,#152246,.T.); +#152246 = EDGE_CURVE('',#152239,#152247,#152249,.T.); +#152247 = VERTEX_POINT('',#152248); +#152248 = CARTESIAN_POINT('',(181.703555,-110.121463,1.585)); +#152249 = LINE('',#152250,#152251); +#152250 = CARTESIAN_POINT('',(181.665383,-110.235976,1.585)); +#152251 = VECTOR('',#152252,1.); +#152252 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#152253 = ORIENTED_EDGE('',*,*,#152254,.T.); +#152254 = EDGE_CURVE('',#152247,#152255,#152257,.T.); +#152255 = VERTEX_POINT('',#152256); +#152256 = CARTESIAN_POINT('',(181.703555,-110.0561,1.585)); +#152257 = LINE('',#152258,#152259); +#152258 = CARTESIAN_POINT('',(181.703555,-110.121463,1.585)); +#152259 = VECTOR('',#152260,1.); +#152260 = DIRECTION('',(0.,1.,0.)); +#152261 = ORIENTED_EDGE('',*,*,#152262,.T.); +#152262 = EDGE_CURVE('',#152255,#152263,#152265,.T.); +#152263 = VERTEX_POINT('',#152264); +#152264 = CARTESIAN_POINT('',(181.570374,-109.922919,1.585)); +#152265 = CIRCLE('',#152266,0.18686440374); +#152266 = AXIS2_PLACEMENT_3D('',#152267,#152268,#152269); +#152267 = CARTESIAN_POINT('',(181.522838,-110.103636,1.585)); +#152268 = DIRECTION('',(0.,0.,1.)); +#152269 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#152270 = ORIENTED_EDGE('',*,*,#152271,.T.); +#152271 = EDGE_CURVE('',#152263,#152272,#152274,.T.); +#152272 = VERTEX_POINT('',#152273); +#152273 = CARTESIAN_POINT('',(181.367689,-109.922919,1.585)); +#152274 = LINE('',#152275,#152276); +#152275 = CARTESIAN_POINT('',(181.570374,-109.922919,1.585)); +#152276 = VECTOR('',#152277,1.); +#152277 = DIRECTION('',(-1.,0.,0.)); +#152278 = ORIENTED_EDGE('',*,*,#152279,.T.); +#152279 = EDGE_CURVE('',#152272,#152280,#152282,.T.); +#152280 = VERTEX_POINT('',#152281); +#152281 = CARTESIAN_POINT('',(181.299173,-109.957177,1.585)); +#152282 = LINE('',#152283,#152284); +#152283 = CARTESIAN_POINT('',(181.367689,-109.922919,1.585)); +#152284 = VECTOR('',#152285,1.); +#152285 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#152286 = ORIENTED_EDGE('',*,*,#152287,.T.); +#152287 = EDGE_CURVE('',#152280,#152288,#152290,.T.); +#152288 = VERTEX_POINT('',#152289); +#152289 = CARTESIAN_POINT('',(181.248795,-110.005517,1.585)); +#152290 = LINE('',#152291,#152292); +#152291 = CARTESIAN_POINT('',(181.299173,-109.957177,1.585)); +#152292 = VECTOR('',#152293,1.); +#152293 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#152294 = ORIENTED_EDGE('',*,*,#152295,.T.); +#152295 = EDGE_CURVE('',#152288,#152296,#152298,.T.); +#152296 = VERTEX_POINT('',#152297); +#152297 = CARTESIAN_POINT('',(181.154094,-109.890124,1.585)); +#152298 = CIRCLE('',#152299,7.499996838528E-02); +#152299 = AXIS2_PLACEMENT_3D('',#152300,#152301,#152302); +#152300 = CARTESIAN_POINT('',(181.207127,-109.9431569724,1.585)); +#152301 = DIRECTION('',(0.,0.,-1.)); +#152302 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#152303 = ORIENTED_EDGE('',*,*,#152304,.T.); +#152304 = EDGE_CURVE('',#152296,#152154,#152305,.T.); +#152305 = LINE('',#152306,#152307); +#152306 = CARTESIAN_POINT('',(181.154094,-109.890124,1.585)); +#152307 = VECTOR('',#152308,1.); +#152308 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#152309 = PLANE('',#152310); +#152310 = AXIS2_PLACEMENT_3D('',#152311,#152312,#152313); +#152311 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152312 = DIRECTION('',(0.,0.,1.)); +#152313 = DIRECTION('',(1.,0.,-0.)); +#152314 = SHELL_BASED_SURFACE_MODEL('',(#152315)); +#152315 = OPEN_SHELL('',(#152316)); +#152316 = ADVANCED_FACE('',(#152317,#152428),#152480,.T.); +#152317 = FACE_BOUND('',#152318,.F.); +#152318 = EDGE_LOOP('',(#152319,#152330,#152338,#152347,#152355,#152364, + #152372,#152380,#152389,#152397,#152405,#152413,#152422)); +#152319 = ORIENTED_EDGE('',*,*,#152320,.T.); +#152320 = EDGE_CURVE('',#152321,#152323,#152325,.T.); +#152321 = VERTEX_POINT('',#152322); +#152322 = CARTESIAN_POINT('',(177.228805,-109.833287,1.585)); +#152323 = VERTEX_POINT('',#152324); +#152324 = CARTESIAN_POINT('',(177.302364,-109.772919,1.585)); +#152325 = CIRCLE('',#152326,7.500074938989E-02); +#152326 = AXIS2_PLACEMENT_3D('',#152327,#152328,#152329); +#152327 = CARTESIAN_POINT('',(177.30236446611,-109.8479197493,1.585)); +#152328 = DIRECTION('',(0.,0.,-1.)); +#152329 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#152330 = ORIENTED_EDGE('',*,*,#152331,.T.); +#152331 = EDGE_CURVE('',#152323,#152332,#152334,.T.); +#152332 = VERTEX_POINT('',#152333); +#152333 = CARTESIAN_POINT('',(177.697948,-109.77436,1.585)); +#152334 = LINE('',#152335,#152336); +#152335 = CARTESIAN_POINT('',(177.302364,-109.772919,1.585)); +#152336 = VECTOR('',#152337,1.); +#152337 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#152338 = ORIENTED_EDGE('',*,*,#152339,.T.); +#152339 = EDGE_CURVE('',#152332,#152340,#152342,.T.); +#152340 = VERTEX_POINT('',#152341); +#152341 = CARTESIAN_POINT('',(177.947351,-110.023763,1.585)); +#152342 = CIRCLE('',#152343,0.347870264855); +#152343 = AXIS2_PLACEMENT_3D('',#152344,#152345,#152346); +#152344 = CARTESIAN_POINT('',(177.61062026502,-110.1110907349,1.585)); +#152345 = DIRECTION('',(0.,0.,-1.)); +#152346 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#152347 = ORIENTED_EDGE('',*,*,#152348,.T.); +#152348 = EDGE_CURVE('',#152340,#152349,#152351,.T.); +#152349 = VERTEX_POINT('',#152350); +#152350 = CARTESIAN_POINT('',(177.946129,-110.201062,1.585)); +#152351 = LINE('',#152352,#152353); +#152352 = CARTESIAN_POINT('',(177.947351,-110.023763,1.585)); +#152353 = VECTOR('',#152354,1.); +#152354 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#152355 = ORIENTED_EDGE('',*,*,#152356,.T.); +#152356 = EDGE_CURVE('',#152349,#152357,#152359,.T.); +#152357 = VERTEX_POINT('',#152358); +#152358 = CARTESIAN_POINT('',(177.697948,-110.445287,1.585)); +#152359 = CIRCLE('',#152360,0.348632345849); +#152360 = AXIS2_PLACEMENT_3D('',#152361,#152362,#152363); +#152361 = CARTESIAN_POINT('',(177.61017919403,-110.1078834593,1.585)); +#152362 = DIRECTION('',(0.,0.,-1.)); +#152363 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#152364 = ORIENTED_EDGE('',*,*,#152365,.T.); +#152365 = EDGE_CURVE('',#152357,#152366,#152368,.T.); +#152366 = VERTEX_POINT('',#152367); +#152367 = CARTESIAN_POINT('',(177.684431,-110.446618,1.585)); +#152368 = LINE('',#152369,#152370); +#152369 = CARTESIAN_POINT('',(177.697948,-110.445287,1.585)); +#152370 = VECTOR('',#152371,1.); +#152371 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#152372 = ORIENTED_EDGE('',*,*,#152373,.T.); +#152373 = EDGE_CURVE('',#152366,#152374,#152376,.T.); +#152374 = VERTEX_POINT('',#152375); +#152375 = CARTESIAN_POINT('',(177.942445,-110.817723,1.585)); +#152376 = LINE('',#152377,#152378); +#152377 = CARTESIAN_POINT('',(177.684431,-110.446618,1.585)); +#152378 = VECTOR('',#152379,1.); +#152379 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#152380 = ORIENTED_EDGE('',*,*,#152381,.T.); +#152381 = EDGE_CURVE('',#152374,#152382,#152384,.T.); +#152382 = VERTEX_POINT('',#152383); +#152383 = CARTESIAN_POINT('',(177.81235,-110.890929,1.585)); +#152384 = CIRCLE('',#152385,7.500005951702E-02); +#152385 = AXIS2_PLACEMENT_3D('',#152386,#152387,#152388); +#152386 = CARTESIAN_POINT('',(177.87379206294,-110.8479187473,1.585)); +#152387 = DIRECTION('',(0.,0.,-1.)); +#152388 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#152389 = ORIENTED_EDGE('',*,*,#152390,.T.); +#152390 = EDGE_CURVE('',#152382,#152391,#152393,.T.); +#152391 = VERTEX_POINT('',#152392); +#152392 = CARTESIAN_POINT('',(177.50141,-110.446728,1.585)); +#152393 = LINE('',#152394,#152395); +#152394 = CARTESIAN_POINT('',(177.81235,-110.890929,1.585)); +#152395 = VECTOR('',#152396,1.); +#152396 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#152397 = ORIENTED_EDGE('',*,*,#152398,.T.); +#152398 = EDGE_CURVE('',#152391,#152399,#152401,.T.); +#152399 = VERTEX_POINT('',#152400); +#152400 = CARTESIAN_POINT('',(177.377364,-110.446728,1.585)); +#152401 = LINE('',#152402,#152403); +#152402 = CARTESIAN_POINT('',(177.50141,-110.446728,1.585)); +#152403 = VECTOR('',#152404,1.); +#152404 = DIRECTION('',(-1.,0.,0.)); +#152405 = ORIENTED_EDGE('',*,*,#152406,.T.); +#152406 = EDGE_CURVE('',#152399,#152407,#152409,.T.); +#152407 = VERTEX_POINT('',#152408); +#152408 = CARTESIAN_POINT('',(177.375923,-110.862551,1.585)); +#152409 = LINE('',#152410,#152411); +#152410 = CARTESIAN_POINT('',(177.377364,-110.446728,1.585)); +#152411 = VECTOR('',#152412,1.); +#152412 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#152413 = ORIENTED_EDGE('',*,*,#152414,.T.); +#152414 = EDGE_CURVE('',#152407,#152415,#152417,.T.); +#152415 = VERTEX_POINT('',#152416); +#152416 = CARTESIAN_POINT('',(177.227364,-110.847919,1.585)); +#152417 = CIRCLE('',#152418,7.500006711464E-02); +#152418 = AXIS2_PLACEMENT_3D('',#152419,#152420,#152421); +#152419 = CARTESIAN_POINT('',(177.30236406711,-110.8479190671,1.585)); +#152420 = DIRECTION('',(-0.,0.,-1.)); +#152421 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#152422 = ORIENTED_EDGE('',*,*,#152423,.T.); +#152423 = EDGE_CURVE('',#152415,#152321,#152424,.T.); +#152424 = LINE('',#152425,#152426); +#152425 = CARTESIAN_POINT('',(177.227364,-110.847919,1.585)); +#152426 = VECTOR('',#152427,1.); +#152427 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#152428 = FACE_BOUND('',#152429,.F.); +#152429 = EDGE_LOOP('',(#152430,#152441,#152449,#152457,#152465,#152474) + ); +#152430 = ORIENTED_EDGE('',*,*,#152431,.T.); +#152431 = EDGE_CURVE('',#152432,#152434,#152436,.T.); +#152432 = VERTEX_POINT('',#152433); +#152433 = CARTESIAN_POINT('',(177.798792,-110.0561,1.585)); +#152434 = VERTEX_POINT('',#152435); +#152435 = CARTESIAN_POINT('',(177.665611,-109.922919,1.585)); +#152436 = CIRCLE('',#152437,0.18686440374); +#152437 = AXIS2_PLACEMENT_3D('',#152438,#152439,#152440); +#152438 = CARTESIAN_POINT('',(177.618075,-110.103636,1.585)); +#152439 = DIRECTION('',(0.,0.,1.)); +#152440 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#152441 = ORIENTED_EDGE('',*,*,#152442,.T.); +#152442 = EDGE_CURVE('',#152434,#152443,#152445,.T.); +#152443 = VERTEX_POINT('',#152444); +#152444 = CARTESIAN_POINT('',(177.377364,-109.922919,1.585)); +#152445 = LINE('',#152446,#152447); +#152446 = CARTESIAN_POINT('',(177.665611,-109.922919,1.585)); +#152447 = VECTOR('',#152448,1.); +#152448 = DIRECTION('',(-1.,0.,0.)); +#152449 = ORIENTED_EDGE('',*,*,#152450,.T.); +#152450 = EDGE_CURVE('',#152443,#152451,#152453,.T.); +#152451 = VERTEX_POINT('',#152452); +#152452 = CARTESIAN_POINT('',(177.377364,-110.296728,1.585)); +#152453 = LINE('',#152454,#152455); +#152454 = CARTESIAN_POINT('',(177.377364,-109.922919,1.585)); +#152455 = VECTOR('',#152456,1.); +#152456 = DIRECTION('',(0.,-1.,0.)); +#152457 = ORIENTED_EDGE('',*,*,#152458,.T.); +#152458 = EDGE_CURVE('',#152451,#152459,#152461,.T.); +#152459 = VERTEX_POINT('',#152460); +#152460 = CARTESIAN_POINT('',(177.665611,-110.296728,1.585)); +#152461 = LINE('',#152462,#152463); +#152462 = CARTESIAN_POINT('',(177.377364,-110.296728,1.585)); +#152463 = VECTOR('',#152464,1.); +#152464 = DIRECTION('',(1.,0.,0.)); +#152465 = ORIENTED_EDGE('',*,*,#152466,.T.); +#152466 = EDGE_CURVE('',#152459,#152467,#152469,.T.); +#152467 = VERTEX_POINT('',#152468); +#152468 = CARTESIAN_POINT('',(177.798792,-110.163547,1.585)); +#152469 = CIRCLE('',#152470,0.18686440374); +#152470 = AXIS2_PLACEMENT_3D('',#152471,#152472,#152473); +#152471 = CARTESIAN_POINT('',(177.618075,-110.116011,1.585)); +#152472 = DIRECTION('',(0.,0.,1.)); +#152473 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#152474 = ORIENTED_EDGE('',*,*,#152475,.T.); +#152475 = EDGE_CURVE('',#152467,#152432,#152476,.T.); +#152476 = LINE('',#152477,#152478); +#152477 = CARTESIAN_POINT('',(177.798792,-110.163547,1.585)); +#152478 = VECTOR('',#152479,1.); +#152479 = DIRECTION('',(0.,1.,0.)); +#152480 = PLANE('',#152481); +#152481 = AXIS2_PLACEMENT_3D('',#152482,#152483,#152484); +#152482 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152483 = DIRECTION('',(0.,0.,1.)); +#152484 = DIRECTION('',(1.,0.,-0.)); +#152485 = SHELL_BASED_SURFACE_MODEL('',(#152486)); +#152486 = OPEN_SHELL('',(#152487)); +#152487 = ADVANCED_FACE('',(#152488),#152646,.T.); +#152488 = FACE_BOUND('',#152489,.F.); +#152489 = EDGE_LOOP('',(#152490,#152500,#152508,#152517,#152525,#152533, + #152541,#152549,#152557,#152566,#152574,#152582,#152591,#152599, + #152607,#152616,#152624,#152632,#152640)); +#152490 = ORIENTED_EDGE('',*,*,#152491,.T.); +#152491 = EDGE_CURVE('',#152492,#152494,#152496,.T.); +#152492 = VERTEX_POINT('',#152493); +#152493 = CARTESIAN_POINT('',(178.316442,-109.828456,1.585)); +#152494 = VERTEX_POINT('',#152495); +#152495 = CARTESIAN_POINT('',(178.430589,-109.77436,1.585)); +#152496 = LINE('',#152497,#152498); +#152497 = CARTESIAN_POINT('',(178.316442,-109.828456,1.585)); +#152498 = VECTOR('',#152499,1.); +#152499 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#152500 = ORIENTED_EDGE('',*,*,#152501,.T.); +#152501 = EDGE_CURVE('',#152494,#152502,#152504,.T.); +#152502 = VERTEX_POINT('',#152503); +#152503 = CARTESIAN_POINT('',(178.555091,-109.77436,1.585)); +#152504 = LINE('',#152505,#152506); +#152505 = CARTESIAN_POINT('',(178.430589,-109.77436,1.585)); +#152506 = VECTOR('',#152507,1.); +#152507 = DIRECTION('',(1.,0.,0.)); +#152508 = ORIENTED_EDGE('',*,*,#152509,.T.); +#152509 = EDGE_CURVE('',#152502,#152510,#152512,.T.); +#152510 = VERTEX_POINT('',#152511); +#152511 = CARTESIAN_POINT('',(178.540459,-109.922919,1.585)); +#152512 = CIRCLE('',#152513,7.500006711464E-02); +#152513 = AXIS2_PLACEMENT_3D('',#152514,#152515,#152516); +#152514 = CARTESIAN_POINT('',(178.54045906711,-109.8479189328,1.585)); +#152515 = DIRECTION('',(0.,0.,-1.)); +#152516 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#152517 = ORIENTED_EDGE('',*,*,#152518,.T.); +#152518 = EDGE_CURVE('',#152510,#152519,#152521,.T.); +#152519 = VERTEX_POINT('',#152520); +#152520 = CARTESIAN_POINT('',(178.462926,-109.922919,1.585)); +#152521 = LINE('',#152522,#152523); +#152522 = CARTESIAN_POINT('',(178.540459,-109.922919,1.585)); +#152523 = VECTOR('',#152524,1.); +#152524 = DIRECTION('',(-1.,0.,0.)); +#152525 = ORIENTED_EDGE('',*,*,#152526,.T.); +#152526 = EDGE_CURVE('',#152519,#152527,#152529,.T.); +#152527 = VERTEX_POINT('',#152528); +#152528 = CARTESIAN_POINT('',(178.405884,-109.951439,1.585)); +#152529 = LINE('',#152530,#152531); +#152530 = CARTESIAN_POINT('',(178.462926,-109.922919,1.585)); +#152531 = VECTOR('',#152532,1.); +#152532 = DIRECTION('',(-0.894433463017,-0.447201051247,0.)); +#152533 = ORIENTED_EDGE('',*,*,#152534,.T.); +#152534 = EDGE_CURVE('',#152527,#152535,#152537,.T.); +#152535 = VERTEX_POINT('',#152536); +#152536 = CARTESIAN_POINT('',(178.377364,-110.008481,1.585)); +#152537 = LINE('',#152538,#152539); +#152538 = CARTESIAN_POINT('',(178.405884,-109.951439,1.585)); +#152539 = VECTOR('',#152540,1.); +#152540 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#152541 = ORIENTED_EDGE('',*,*,#152542,.T.); +#152542 = EDGE_CURVE('',#152535,#152543,#152545,.T.); +#152543 = VERTEX_POINT('',#152544); +#152544 = CARTESIAN_POINT('',(178.377364,-110.106252,1.585)); +#152545 = LINE('',#152546,#152547); +#152546 = CARTESIAN_POINT('',(178.377364,-110.008481,1.585)); +#152547 = VECTOR('',#152548,1.); +#152548 = DIRECTION('',(0.,-1.,0.)); +#152549 = ORIENTED_EDGE('',*,*,#152550,.T.); +#152550 = EDGE_CURVE('',#152543,#152551,#152553,.T.); +#152551 = VERTEX_POINT('',#152552); +#152552 = CARTESIAN_POINT('',(178.555091,-110.107693,1.585)); +#152553 = LINE('',#152554,#152555); +#152554 = CARTESIAN_POINT('',(178.377364,-110.106252,1.585)); +#152555 = VECTOR('',#152556,1.); +#152556 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#152557 = ORIENTED_EDGE('',*,*,#152558,.T.); +#152558 = EDGE_CURVE('',#152551,#152559,#152561,.T.); +#152559 = VERTEX_POINT('',#152560); +#152560 = CARTESIAN_POINT('',(178.540459,-110.256252,1.585)); +#152561 = CIRCLE('',#152562,7.500006711464E-02); +#152562 = AXIS2_PLACEMENT_3D('',#152563,#152564,#152565); +#152563 = CARTESIAN_POINT('',(178.54045906711,-110.1812519328,1.585)); +#152564 = DIRECTION('',(0.,0.,-1.)); +#152565 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#152566 = ORIENTED_EDGE('',*,*,#152567,.T.); +#152567 = EDGE_CURVE('',#152559,#152568,#152570,.T.); +#152568 = VERTEX_POINT('',#152569); +#152569 = CARTESIAN_POINT('',(178.377364,-110.256252,1.585)); +#152570 = LINE('',#152571,#152572); +#152571 = CARTESIAN_POINT('',(178.540459,-110.256252,1.585)); +#152572 = VECTOR('',#152573,1.); +#152573 = DIRECTION('',(-1.,0.,0.)); +#152574 = ORIENTED_EDGE('',*,*,#152575,.T.); +#152575 = EDGE_CURVE('',#152568,#152576,#152578,.T.); +#152576 = VERTEX_POINT('',#152577); +#152577 = CARTESIAN_POINT('',(178.375923,-110.862551,1.585)); +#152578 = LINE('',#152579,#152580); +#152579 = CARTESIAN_POINT('',(178.377364,-110.256252,1.585)); +#152580 = VECTOR('',#152581,1.); +#152581 = DIRECTION('',(-2.376708406372E-03,-0.999997175625,0.)); +#152582 = ORIENTED_EDGE('',*,*,#152583,.T.); +#152583 = EDGE_CURVE('',#152576,#152584,#152586,.T.); +#152584 = VERTEX_POINT('',#152585); +#152585 = CARTESIAN_POINT('',(178.227364,-110.847919,1.585)); +#152586 = CIRCLE('',#152587,7.500006711464E-02); +#152587 = AXIS2_PLACEMENT_3D('',#152588,#152589,#152590); +#152588 = CARTESIAN_POINT('',(178.30236406711,-110.8479190671,1.585)); +#152589 = DIRECTION('',(-0.,0.,-1.)); +#152590 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#152591 = ORIENTED_EDGE('',*,*,#152592,.T.); +#152592 = EDGE_CURVE('',#152584,#152593,#152595,.T.); +#152593 = VERTEX_POINT('',#152594); +#152594 = CARTESIAN_POINT('',(178.227364,-110.256252,1.585)); +#152595 = LINE('',#152596,#152597); +#152596 = CARTESIAN_POINT('',(178.227364,-110.847919,1.585)); +#152597 = VECTOR('',#152598,1.); +#152598 = DIRECTION('',(0.,1.,0.)); +#152599 = ORIENTED_EDGE('',*,*,#152600,.T.); +#152600 = EDGE_CURVE('',#152593,#152601,#152603,.T.); +#152601 = VERTEX_POINT('',#152602); +#152602 = CARTESIAN_POINT('',(178.144875,-110.254811,1.585)); +#152603 = LINE('',#152604,#152605); +#152604 = CARTESIAN_POINT('',(178.227364,-110.256252,1.585)); +#152605 = VECTOR('',#152606,1.); +#152606 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#152607 = ORIENTED_EDGE('',*,*,#152608,.T.); +#152608 = EDGE_CURVE('',#152601,#152609,#152611,.T.); +#152609 = VERTEX_POINT('',#152610); +#152610 = CARTESIAN_POINT('',(178.159507,-110.106252,1.585)); +#152611 = CIRCLE('',#152612,7.500006711464E-02); +#152612 = AXIS2_PLACEMENT_3D('',#152613,#152614,#152615); +#152613 = CARTESIAN_POINT('',(178.15950693288,-110.1812520671,1.585)); +#152614 = DIRECTION('',(0.,0.,-1.)); +#152615 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#152616 = ORIENTED_EDGE('',*,*,#152617,.T.); +#152617 = EDGE_CURVE('',#152609,#152618,#152620,.T.); +#152618 = VERTEX_POINT('',#152619); +#152619 = CARTESIAN_POINT('',(178.227364,-110.106252,1.585)); +#152620 = LINE('',#152621,#152622); +#152621 = CARTESIAN_POINT('',(178.159507,-110.106252,1.585)); +#152622 = VECTOR('',#152623,1.); +#152623 = DIRECTION('',(1.,0.,0.)); +#152624 = ORIENTED_EDGE('',*,*,#152625,.T.); +#152625 = EDGE_CURVE('',#152618,#152626,#152628,.T.); +#152626 = VERTEX_POINT('',#152627); +#152627 = CARTESIAN_POINT('',(178.230027,-109.970967,1.585)); +#152628 = LINE('',#152629,#152630); +#152629 = CARTESIAN_POINT('',(178.227364,-110.106252,1.585)); +#152630 = VECTOR('',#152631,1.); +#152631 = DIRECTION('',(1.968055754665E-02,0.999806319071,0.)); +#152632 = ORIENTED_EDGE('',*,*,#152633,.T.); +#152633 = EDGE_CURVE('',#152626,#152634,#152636,.T.); +#152634 = VERTEX_POINT('',#152635); +#152635 = CARTESIAN_POINT('',(178.290733,-109.849554,1.585)); +#152636 = LINE('',#152637,#152638); +#152637 = CARTESIAN_POINT('',(178.230027,-109.970967,1.585)); +#152638 = VECTOR('',#152639,1.); +#152639 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#152640 = ORIENTED_EDGE('',*,*,#152641,.T.); +#152641 = EDGE_CURVE('',#152634,#152492,#152642,.T.); +#152642 = LINE('',#152643,#152644); +#152643 = CARTESIAN_POINT('',(178.290733,-109.849554,1.585)); +#152644 = VECTOR('',#152645,1.); +#152645 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#152646 = PLANE('',#152647); +#152647 = AXIS2_PLACEMENT_3D('',#152648,#152649,#152650); +#152648 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152649 = DIRECTION('',(0.,0.,1.)); +#152650 = DIRECTION('',(1.,0.,-0.)); +#152651 = SHELL_BASED_SURFACE_MODEL('',(#152652)); +#152652 = OPEN_SHELL('',(#152653)); +#152653 = ADVANCED_FACE('',(#152654),#152756,.T.); +#152654 = FACE_BOUND('',#152655,.F.); +#152655 = EDGE_LOOP('',(#152656,#152667,#152675,#152683,#152691,#152700, + #152708,#152717,#152725,#152734,#152742,#152750)); +#152656 = ORIENTED_EDGE('',*,*,#152657,.T.); +#152657 = EDGE_CURVE('',#152658,#152660,#152662,.T.); +#152658 = VERTEX_POINT('',#152659); +#152659 = CARTESIAN_POINT('',(178.832125,-110.118892,1.585)); +#152660 = VERTEX_POINT('',#152661); +#152661 = CARTESIAN_POINT('',(178.936153,-110.139584,1.585)); +#152662 = CIRCLE('',#152663,7.499946135252E-02); +#152663 = AXIS2_PLACEMENT_3D('',#152664,#152665,#152666); +#152664 = CARTESIAN_POINT('',(178.87379313357,-110.1812513284,1.585)); +#152665 = DIRECTION('',(0.,0.,-1.)); +#152666 = DIRECTION('',(-0.55557910444,0.83146368454,0.)); +#152667 = ORIENTED_EDGE('',*,*,#152668,.T.); +#152668 = EDGE_CURVE('',#152660,#152669,#152671,.T.); +#152669 = VERTEX_POINT('',#152670); +#152670 = CARTESIAN_POINT('',(178.943658,-110.157704,1.585)); +#152671 = LINE('',#152672,#152673); +#152672 = CARTESIAN_POINT('',(178.936153,-110.139584,1.585)); +#152673 = VECTOR('',#152674,1.); +#152674 = DIRECTION('',(0.382659506909,-0.923889442397,0.)); +#152675 = ORIENTED_EDGE('',*,*,#152676,.T.); +#152676 = EDGE_CURVE('',#152669,#152677,#152679,.T.); +#152677 = VERTEX_POINT('',#152678); +#152678 = CARTESIAN_POINT('',(179.049637,-110.107693,1.585)); +#152679 = LINE('',#152680,#152681); +#152680 = CARTESIAN_POINT('',(178.943658,-110.157704,1.585)); +#152681 = VECTOR('',#152682,1.); +#152682 = DIRECTION('',(0.904362746847,0.426764598011,0.)); +#152683 = ORIENTED_EDGE('',*,*,#152684,.T.); +#152684 = EDGE_CURVE('',#152677,#152685,#152687,.T.); +#152685 = VERTEX_POINT('',#152686); +#152686 = CARTESIAN_POINT('',(179.174139,-110.107693,1.585)); +#152687 = LINE('',#152688,#152689); +#152688 = CARTESIAN_POINT('',(179.049637,-110.107693,1.585)); +#152689 = VECTOR('',#152690,1.); +#152690 = DIRECTION('',(1.,0.,0.)); +#152691 = ORIENTED_EDGE('',*,*,#152692,.T.); +#152692 = EDGE_CURVE('',#152685,#152693,#152695,.T.); +#152693 = VERTEX_POINT('',#152694); +#152694 = CARTESIAN_POINT('',(179.159507,-110.256252,1.585)); +#152695 = CIRCLE('',#152696,7.500006711464E-02); +#152696 = AXIS2_PLACEMENT_3D('',#152697,#152698,#152699); +#152697 = CARTESIAN_POINT('',(179.15950706711,-110.1812519328,1.585)); +#152698 = DIRECTION('',(0.,0.,-1.)); +#152699 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#152700 = ORIENTED_EDGE('',*,*,#152701,.T.); +#152701 = EDGE_CURVE('',#152693,#152702,#152704,.T.); +#152702 = VERTEX_POINT('',#152703); +#152703 = CARTESIAN_POINT('',(179.081974,-110.256252,1.585)); +#152704 = LINE('',#152705,#152706); +#152705 = CARTESIAN_POINT('',(179.159507,-110.256252,1.585)); +#152706 = VECTOR('',#152707,1.); +#152707 = DIRECTION('',(-1.,0.,0.)); +#152708 = ORIENTED_EDGE('',*,*,#152709,.T.); +#152709 = EDGE_CURVE('',#152702,#152710,#152712,.T.); +#152710 = VERTEX_POINT('',#152711); +#152711 = CARTESIAN_POINT('',(178.948793,-110.389433,1.585)); +#152712 = CIRCLE('',#152713,0.18686440374); +#152713 = AXIS2_PLACEMENT_3D('',#152714,#152715,#152716); +#152714 = CARTESIAN_POINT('',(179.12951,-110.436969,1.585)); +#152715 = DIRECTION('',(0.,0.,1.)); +#152716 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#152717 = ORIENTED_EDGE('',*,*,#152718,.T.); +#152718 = EDGE_CURVE('',#152710,#152719,#152721,.T.); +#152719 = VERTEX_POINT('',#152720); +#152720 = CARTESIAN_POINT('',(178.947352,-110.862551,1.585)); +#152721 = LINE('',#152722,#152723); +#152722 = CARTESIAN_POINT('',(178.948793,-110.389433,1.585)); +#152723 = VECTOR('',#152724,1.); +#152724 = DIRECTION('',(-3.045737672744E-03,-0.99999536173,0.)); +#152725 = ORIENTED_EDGE('',*,*,#152726,.T.); +#152726 = EDGE_CURVE('',#152719,#152727,#152729,.T.); +#152727 = VERTEX_POINT('',#152728); +#152728 = CARTESIAN_POINT('',(178.798793,-110.847919,1.585)); +#152729 = CIRCLE('',#152730,7.500006711464E-02); +#152730 = AXIS2_PLACEMENT_3D('',#152731,#152732,#152733); +#152731 = CARTESIAN_POINT('',(178.87379306711,-110.8479190671,1.585)); +#152732 = DIRECTION('',(-0.,0.,-1.)); +#152733 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#152734 = ORIENTED_EDGE('',*,*,#152735,.T.); +#152735 = EDGE_CURVE('',#152727,#152736,#152738,.T.); +#152736 = VERTEX_POINT('',#152737); +#152737 = CARTESIAN_POINT('',(178.800234,-110.16662,1.585)); +#152738 = LINE('',#152739,#152740); +#152739 = CARTESIAN_POINT('',(178.798793,-110.847919,1.585)); +#152740 = VECTOR('',#152741,1.); +#152741 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#152742 = ORIENTED_EDGE('',*,*,#152743,.T.); +#152743 = EDGE_CURVE('',#152736,#152744,#152746,.T.); +#152744 = VERTEX_POINT('',#152745); +#152745 = CARTESIAN_POINT('',(178.811433,-110.139584,1.585)); +#152746 = LINE('',#152747,#152748); +#152747 = CARTESIAN_POINT('',(178.800234,-110.16662,1.585)); +#152748 = VECTOR('',#152749,1.); +#152749 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#152750 = ORIENTED_EDGE('',*,*,#152751,.T.); +#152751 = EDGE_CURVE('',#152744,#152658,#152752,.T.); +#152752 = LINE('',#152753,#152754); +#152753 = CARTESIAN_POINT('',(178.811433,-110.139584,1.585)); +#152754 = VECTOR('',#152755,1.); +#152755 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#152756 = PLANE('',#152757); +#152757 = AXIS2_PLACEMENT_3D('',#152758,#152759,#152760); +#152758 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152759 = DIRECTION('',(0.,0.,1.)); +#152760 = DIRECTION('',(1.,0.,-0.)); +#152761 = SHELL_BASED_SURFACE_MODEL('',(#152762)); +#152762 = OPEN_SHELL('',(#152763)); +#152763 = ADVANCED_FACE('',(#152764,#152936),#152987,.T.); +#152764 = FACE_BOUND('',#152765,.F.); +#152765 = EDGE_LOOP('',(#152766,#152777,#152785,#152793,#152801,#152809, + #152817,#152825,#152833,#152841,#152849,#152857,#152865,#152874, + #152882,#152890,#152898,#152906,#152914,#152922,#152930)); +#152766 = ORIENTED_EDGE('',*,*,#152767,.T.); +#152767 = EDGE_CURVE('',#152768,#152770,#152772,.T.); +#152768 = VERTEX_POINT('',#152769); +#152769 = CARTESIAN_POINT('',(179.4593,-110.161789,1.585)); +#152770 = VERTEX_POINT('',#152771); +#152771 = CARTESIAN_POINT('',(179.919777,-110.169621,1.585)); +#152772 = CIRCLE('',#152773,0.398777683503); +#152773 = AXIS2_PLACEMENT_3D('',#152774,#152775,#152776); +#152774 = CARTESIAN_POINT('',(179.68400178885,-110.491232086,1.585)); +#152775 = DIRECTION('',(0.,0.,-1.)); +#152776 = DIRECTION('',(-0.563476338197,0.826132202673,0.)); +#152777 = ORIENTED_EDGE('',*,*,#152778,.T.); +#152778 = EDGE_CURVE('',#152770,#152779,#152781,.T.); +#152779 = VERTEX_POINT('',#152780); +#152780 = CARTESIAN_POINT('',(179.940875,-110.19533,1.585)); +#152781 = LINE('',#152782,#152783); +#152782 = CARTESIAN_POINT('',(179.919777,-110.169621,1.585)); +#152783 = VECTOR('',#152784,1.); +#152784 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#152785 = ORIENTED_EDGE('',*,*,#152786,.T.); +#152786 = EDGE_CURVE('',#152779,#152787,#152789,.T.); +#152787 = VERTEX_POINT('',#152788); +#152788 = CARTESIAN_POINT('',(179.994971,-110.309477,1.585)); +#152789 = LINE('',#152790,#152791); +#152790 = CARTESIAN_POINT('',(179.940875,-110.19533,1.585)); +#152791 = VECTOR('',#152792,1.); +#152792 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#152793 = ORIENTED_EDGE('',*,*,#152794,.T.); +#152794 = EDGE_CURVE('',#152787,#152795,#152797,.T.); +#152795 = VERTEX_POINT('',#152796); +#152796 = CARTESIAN_POINT('',(179.994971,-110.433979,1.585)); +#152797 = LINE('',#152798,#152799); +#152798 = CARTESIAN_POINT('',(179.994971,-110.309477,1.585)); +#152799 = VECTOR('',#152800,1.); +#152800 = DIRECTION('',(0.,-1.,0.)); +#152801 = ORIENTED_EDGE('',*,*,#152802,.T.); +#152802 = EDGE_CURVE('',#152795,#152803,#152805,.T.); +#152803 = VERTEX_POINT('',#152804); +#152804 = CARTESIAN_POINT('',(179.9745,-110.472324,1.585)); +#152805 = LINE('',#152806,#152807); +#152806 = CARTESIAN_POINT('',(179.994971,-110.433979,1.585)); +#152807 = VECTOR('',#152808,1.); +#152808 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#152809 = ORIENTED_EDGE('',*,*,#152810,.T.); +#152810 = EDGE_CURVE('',#152803,#152811,#152813,.T.); +#152811 = VERTEX_POINT('',#152812); +#152812 = CARTESIAN_POINT('',(179.93612,-110.492891,1.585)); +#152813 = LINE('',#152814,#152815); +#152814 = CARTESIAN_POINT('',(179.9745,-110.472324,1.585)); +#152815 = VECTOR('',#152816,1.); +#152816 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#152817 = ORIENTED_EDGE('',*,*,#152818,.T.); +#152818 = EDGE_CURVE('',#152811,#152819,#152821,.T.); +#152819 = VERTEX_POINT('',#152820); +#152820 = CARTESIAN_POINT('',(179.520222,-110.57607,1.585)); +#152821 = LINE('',#152822,#152823); +#152822 = CARTESIAN_POINT('',(179.93612,-110.492891,1.585)); +#152823 = VECTOR('',#152824,1.); +#152824 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#152825 = ORIENTED_EDGE('',*,*,#152826,.T.); +#152826 = EDGE_CURVE('',#152819,#152827,#152829,.T.); +#152827 = VERTEX_POINT('',#152828); +#152828 = CARTESIAN_POINT('',(179.520222,-110.687356,1.585)); +#152829 = LINE('',#152830,#152831); +#152830 = CARTESIAN_POINT('',(179.520222,-110.57607,1.585)); +#152831 = VECTOR('',#152832,1.); +#152832 = DIRECTION('',(0.,-1.,0.)); +#152833 = ORIENTED_EDGE('',*,*,#152834,.T.); +#152834 = EDGE_CURVE('',#152827,#152835,#152837,.T.); +#152835 = VERTEX_POINT('',#152836); +#152836 = CARTESIAN_POINT('',(179.548742,-110.744398,1.585)); +#152837 = LINE('',#152838,#152839); +#152838 = CARTESIAN_POINT('',(179.520222,-110.687356,1.585)); +#152839 = VECTOR('',#152840,1.); +#152840 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#152841 = ORIENTED_EDGE('',*,*,#152842,.T.); +#152842 = EDGE_CURVE('',#152835,#152843,#152845,.T.); +#152843 = VERTEX_POINT('',#152844); +#152844 = CARTESIAN_POINT('',(179.605784,-110.772919,1.585)); +#152845 = LINE('',#152846,#152847); +#152846 = CARTESIAN_POINT('',(179.548742,-110.744398,1.585)); +#152847 = VECTOR('',#152848,1.); +#152848 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#152849 = ORIENTED_EDGE('',*,*,#152850,.T.); +#152850 = EDGE_CURVE('',#152843,#152851,#152853,.T.); +#152851 = VERTEX_POINT('',#152852); +#152852 = CARTESIAN_POINT('',(179.76085,-110.772919,1.585)); +#152853 = LINE('',#152854,#152855); +#152854 = CARTESIAN_POINT('',(179.605784,-110.772919,1.585)); +#152855 = VECTOR('',#152856,1.); +#152856 = DIRECTION('',(1.,0.,0.)); +#152857 = ORIENTED_EDGE('',*,*,#152858,.T.); +#152858 = EDGE_CURVE('',#152851,#152859,#152861,.T.); +#152859 = VERTEX_POINT('',#152860); +#152860 = CARTESIAN_POINT('',(179.853983,-110.727963,1.585)); +#152861 = LINE('',#152862,#152863); +#152862 = CARTESIAN_POINT('',(179.76085,-110.772919,1.585)); +#152863 = VECTOR('',#152864,1.); +#152864 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#152865 = ORIENTED_EDGE('',*,*,#152866,.T.); +#152866 = EDGE_CURVE('',#152859,#152867,#152869,.T.); +#152867 = VERTEX_POINT('',#152868); +#152868 = CARTESIAN_POINT('',(179.907334,-110.867382,1.585)); +#152869 = CIRCLE('',#152870,7.500029440469E-02); +#152870 = AXIS2_PLACEMENT_3D('',#152871,#152872,#152873); +#152871 = CARTESIAN_POINT('',(179.87379235132,-110.800299946,1.585)); +#152872 = DIRECTION('',(0.,0.,-1.)); +#152873 = DIRECTION('',(-0.264123647521,0.964488827732,-0.)); +#152874 = ORIENTED_EDGE('',*,*,#152875,.T.); +#152875 = EDGE_CURVE('',#152867,#152876,#152878,.T.); +#152876 = VERTEX_POINT('',#152877); +#152877 = CARTESIAN_POINT('',(179.793187,-110.921478,1.585)); +#152878 = LINE('',#152879,#152880); +#152879 = CARTESIAN_POINT('',(179.907334,-110.867382,1.585)); +#152880 = VECTOR('',#152881,1.); +#152881 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#152882 = ORIENTED_EDGE('',*,*,#152883,.T.); +#152883 = EDGE_CURVE('',#152876,#152884,#152886,.T.); +#152884 = VERTEX_POINT('',#152885); +#152885 = CARTESIAN_POINT('',(179.568269,-110.920256,1.585)); +#152886 = LINE('',#152887,#152888); +#152887 = CARTESIAN_POINT('',(179.793187,-110.921478,1.585)); +#152888 = VECTOR('',#152889,1.); +#152889 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#152890 = ORIENTED_EDGE('',*,*,#152891,.T.); +#152891 = EDGE_CURVE('',#152884,#152892,#152894,.T.); +#152892 = VERTEX_POINT('',#152893); +#152893 = CARTESIAN_POINT('',(179.446857,-110.85955,1.585)); +#152894 = LINE('',#152895,#152896); +#152895 = CARTESIAN_POINT('',(179.568269,-110.920256,1.585)); +#152896 = VECTOR('',#152897,1.); +#152897 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#152898 = ORIENTED_EDGE('',*,*,#152899,.T.); +#152899 = EDGE_CURVE('',#152892,#152900,#152902,.T.); +#152900 = VERTEX_POINT('',#152901); +#152901 = CARTESIAN_POINT('',(179.425759,-110.833841,1.585)); +#152902 = LINE('',#152903,#152904); +#152903 = CARTESIAN_POINT('',(179.446857,-110.85955,1.585)); +#152904 = VECTOR('',#152905,1.); +#152905 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#152906 = ORIENTED_EDGE('',*,*,#152907,.T.); +#152907 = EDGE_CURVE('',#152900,#152908,#152910,.T.); +#152908 = VERTEX_POINT('',#152909); +#152909 = CARTESIAN_POINT('',(179.371663,-110.719693,1.585)); +#152910 = LINE('',#152911,#152912); +#152911 = CARTESIAN_POINT('',(179.425759,-110.833841,1.585)); +#152912 = VECTOR('',#152913,1.); +#152913 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#152914 = ORIENTED_EDGE('',*,*,#152915,.T.); +#152915 = EDGE_CURVE('',#152908,#152916,#152918,.T.); +#152916 = VERTEX_POINT('',#152917); +#152917 = CARTESIAN_POINT('',(179.372885,-110.3043,1.585)); +#152918 = LINE('',#152919,#152920); +#152919 = CARTESIAN_POINT('',(179.371663,-110.719693,1.585)); +#152920 = VECTOR('',#152921,1.); +#152921 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#152922 = ORIENTED_EDGE('',*,*,#152923,.T.); +#152923 = EDGE_CURVE('',#152916,#152924,#152926,.T.); +#152924 = VERTEX_POINT('',#152925); +#152925 = CARTESIAN_POINT('',(179.433591,-110.182887,1.585)); +#152926 = LINE('',#152927,#152928); +#152927 = CARTESIAN_POINT('',(179.372885,-110.3043,1.585)); +#152928 = VECTOR('',#152929,1.); +#152929 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#152930 = ORIENTED_EDGE('',*,*,#152931,.T.); +#152931 = EDGE_CURVE('',#152924,#152768,#152932,.T.); +#152932 = LINE('',#152933,#152934); +#152933 = CARTESIAN_POINT('',(179.433591,-110.182887,1.585)); +#152934 = VECTOR('',#152935,1.); +#152935 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#152936 = FACE_BOUND('',#152937,.F.); +#152937 = EDGE_LOOP('',(#152938,#152949,#152957,#152965,#152973,#152981) + ); +#152938 = ORIENTED_EDGE('',*,*,#152939,.T.); +#152939 = EDGE_CURVE('',#152940,#152942,#152944,.T.); +#152940 = VERTEX_POINT('',#152941); +#152941 = CARTESIAN_POINT('',(179.817891,-110.284772,1.585)); +#152942 = VERTEX_POINT('',#152943); +#152943 = CARTESIAN_POINT('',(179.548742,-110.284772,1.585)); +#152944 = CIRCLE('',#152945,0.239283669194); +#152945 = AXIS2_PLACEMENT_3D('',#152946,#152947,#152948); +#152946 = CARTESIAN_POINT('',(179.6833165,-110.4826264371,1.585)); +#152947 = DIRECTION('',(0.,0.,1.)); +#152948 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#152949 = ORIENTED_EDGE('',*,*,#152950,.T.); +#152950 = EDGE_CURVE('',#152942,#152951,#152953,.T.); +#152951 = VERTEX_POINT('',#152952); +#152952 = CARTESIAN_POINT('',(179.520222,-110.341814,1.585)); +#152953 = LINE('',#152954,#152955); +#152954 = CARTESIAN_POINT('',(179.548742,-110.284772,1.585)); +#152955 = VECTOR('',#152956,1.); +#152956 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#152957 = ORIENTED_EDGE('',*,*,#152958,.T.); +#152958 = EDGE_CURVE('',#152951,#152959,#152961,.T.); +#152959 = VERTEX_POINT('',#152960); +#152960 = CARTESIAN_POINT('',(179.520222,-110.423099,1.585)); +#152961 = LINE('',#152962,#152963); +#152962 = CARTESIAN_POINT('',(179.520222,-110.341814,1.585)); +#152963 = VECTOR('',#152964,1.); +#152964 = DIRECTION('',(0.,-1.,0.)); +#152965 = ORIENTED_EDGE('',*,*,#152966,.T.); +#152966 = EDGE_CURVE('',#152959,#152967,#152969,.T.); +#152967 = VERTEX_POINT('',#152968); +#152968 = CARTESIAN_POINT('',(179.846412,-110.357862,1.585)); +#152969 = LINE('',#152970,#152971); +#152970 = CARTESIAN_POINT('',(179.520222,-110.423099,1.585)); +#152971 = VECTOR('',#152972,1.); +#152972 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#152973 = ORIENTED_EDGE('',*,*,#152974,.T.); +#152974 = EDGE_CURVE('',#152967,#152975,#152977,.T.); +#152975 = VERTEX_POINT('',#152976); +#152976 = CARTESIAN_POINT('',(179.846412,-110.341814,1.585)); +#152977 = LINE('',#152978,#152979); +#152978 = CARTESIAN_POINT('',(179.846412,-110.357862,1.585)); +#152979 = VECTOR('',#152980,1.); +#152980 = DIRECTION('',(0.,1.,0.)); +#152981 = ORIENTED_EDGE('',*,*,#152982,.T.); +#152982 = EDGE_CURVE('',#152975,#152940,#152983,.T.); +#152983 = LINE('',#152984,#152985); +#152984 = CARTESIAN_POINT('',(179.846412,-110.341814,1.585)); +#152985 = VECTOR('',#152986,1.); +#152986 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#152987 = PLANE('',#152988); +#152988 = AXIS2_PLACEMENT_3D('',#152989,#152990,#152991); +#152989 = CARTESIAN_POINT('',(0.,0.,1.585)); +#152990 = DIRECTION('',(0.,0.,1.)); +#152991 = DIRECTION('',(1.,0.,-0.)); +#152992 = SHELL_BASED_SURFACE_MODEL('',(#152993)); +#152993 = OPEN_SHELL('',(#152994)); +#152994 = ADVANCED_FACE('',(#152995),#153072,.T.); +#152995 = FACE_BOUND('',#152996,.F.); +#152996 = EDGE_LOOP('',(#152997,#153008,#153016,#153024,#153033,#153041, + #153050,#153058,#153066)); +#152997 = ORIENTED_EDGE('',*,*,#152998,.T.); +#152998 = EDGE_CURVE('',#152999,#153001,#153003,.T.); +#152999 = VERTEX_POINT('',#153000); +#153000 = CARTESIAN_POINT('',(167.007125,-109.415559,1.585)); +#153001 = VERTEX_POINT('',#153002); +#153002 = CARTESIAN_POINT('',(167.123793,-109.477919,1.585)); +#153003 = CIRCLE('',#153004,7.500000000004E-02); +#153004 = AXIS2_PLACEMENT_3D('',#153005,#153006,#153007); +#153005 = CARTESIAN_POINT('',(167.048793,-109.4779190655,1.585)); +#153006 = DIRECTION('',(0.,0.,-1.)); +#153007 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#153008 = ORIENTED_EDGE('',*,*,#153009,.T.); +#153009 = EDGE_CURVE('',#153001,#153010,#153012,.T.); +#153010 = VERTEX_POINT('',#153011); +#153011 = CARTESIAN_POINT('',(167.123793,-110.402919,1.585)); +#153012 = LINE('',#153013,#153014); +#153013 = CARTESIAN_POINT('',(167.123793,-109.477919,1.585)); +#153014 = VECTOR('',#153015,1.); +#153015 = DIRECTION('',(0.,-1.,0.)); +#153016 = ORIENTED_EDGE('',*,*,#153017,.T.); +#153017 = EDGE_CURVE('',#153010,#153018,#153020,.T.); +#153018 = VERTEX_POINT('',#153019); +#153019 = CARTESIAN_POINT('',(167.539615,-110.40436,1.585)); +#153020 = LINE('',#153021,#153022); +#153021 = CARTESIAN_POINT('',(167.123793,-110.402919,1.585)); +#153022 = VECTOR('',#153023,1.); +#153023 = DIRECTION('',(0.999993995468,-3.465404301528E-03,0.)); +#153024 = ORIENTED_EDGE('',*,*,#153025,.T.); +#153025 = EDGE_CURVE('',#153018,#153026,#153028,.T.); +#153026 = VERTEX_POINT('',#153027); +#153027 = CARTESIAN_POINT('',(167.524983,-110.552919,1.585)); +#153028 = CIRCLE('',#153029,7.500006711465E-02); +#153029 = AXIS2_PLACEMENT_3D('',#153030,#153031,#153032); +#153030 = CARTESIAN_POINT('',(167.52498306711,-110.4779189328,1.585)); +#153031 = DIRECTION('',(0.,0.,-1.)); +#153032 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#153033 = ORIENTED_EDGE('',*,*,#153034,.T.); +#153034 = EDGE_CURVE('',#153026,#153035,#153037,.T.); +#153035 = VERTEX_POINT('',#153036); +#153036 = CARTESIAN_POINT('',(167.034161,-110.551478,1.585)); +#153037 = LINE('',#153038,#153039); +#153038 = CARTESIAN_POINT('',(167.524983,-110.552919,1.585)); +#153039 = VECTOR('',#153040,1.); +#153040 = DIRECTION('',(-0.999995690299,2.935878566407E-03,0.)); +#153041 = ORIENTED_EDGE('',*,*,#153042,.T.); +#153042 = EDGE_CURVE('',#153035,#153043,#153045,.T.); +#153043 = VERTEX_POINT('',#153044); +#153044 = CARTESIAN_POINT('',(166.973793,-110.477919,1.585)); +#153045 = CIRCLE('',#153046,7.500074938989E-02); +#153046 = AXIS2_PLACEMENT_3D('',#153047,#153048,#153049); +#153047 = CARTESIAN_POINT('',(167.04879374938,-110.4779185338,1.585)); +#153048 = DIRECTION('',(0.,0.,-1.)); +#153049 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#153050 = ORIENTED_EDGE('',*,*,#153051,.T.); +#153051 = EDGE_CURVE('',#153043,#153052,#153054,.T.); +#153052 = VERTEX_POINT('',#153053); +#153053 = CARTESIAN_POINT('',(166.975234,-109.463287,1.585)); +#153054 = LINE('',#153055,#153056); +#153055 = CARTESIAN_POINT('',(166.973793,-110.477919,1.585)); +#153056 = VECTOR('',#153057,1.); +#153057 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#153058 = ORIENTED_EDGE('',*,*,#153059,.T.); +#153059 = EDGE_CURVE('',#153052,#153060,#153062,.T.); +#153060 = VERTEX_POINT('',#153061); +#153061 = CARTESIAN_POINT('',(166.986433,-109.436251,1.585)); +#153062 = LINE('',#153063,#153064); +#153063 = CARTESIAN_POINT('',(166.975234,-109.463287,1.585)); +#153064 = VECTOR('',#153065,1.); +#153065 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#153066 = ORIENTED_EDGE('',*,*,#153067,.T.); +#153067 = EDGE_CURVE('',#153060,#152999,#153068,.T.); +#153068 = LINE('',#153069,#153070); +#153069 = CARTESIAN_POINT('',(166.986433,-109.436251,1.585)); +#153070 = VECTOR('',#153071,1.); +#153071 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#153072 = PLANE('',#153073); +#153073 = AXIS2_PLACEMENT_3D('',#153074,#153075,#153076); +#153074 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153075 = DIRECTION('',(0.,0.,1.)); +#153076 = DIRECTION('',(1.,0.,-0.)); +#153077 = SHELL_BASED_SURFACE_MODEL('',(#153078)); +#153078 = OPEN_SHELL('',(#153079)); +#153079 = ADVANCED_FACE('',(#153080,#153223),#153293,.T.); +#153080 = FACE_BOUND('',#153081,.F.); +#153081 = EDGE_LOOP('',(#153082,#153093,#153101,#153109,#153118,#153126, + #153134,#153142,#153150,#153158,#153166,#153174,#153183,#153191, + #153200,#153208,#153217)); +#153082 = ORIENTED_EDGE('',*,*,#153083,.T.); +#153083 = EDGE_CURVE('',#153084,#153086,#153088,.T.); +#153084 = VERTEX_POINT('',#153085); +#153085 = CARTESIAN_POINT('',(167.737937,-109.8883,1.585)); +#153086 = VERTEX_POINT('',#153087); +#153087 = CARTESIAN_POINT('',(167.967633,-109.458456,1.585)); +#153088 = CIRCLE('',#153089,0.610092147705); +#153089 = AXIS2_PLACEMENT_3D('',#153090,#153091,#153092); +#153090 = CARTESIAN_POINT('',(168.34608374024,-109.9369823481,1.585)); +#153091 = DIRECTION('',(0.,0.,-1.)); +#153092 = DIRECTION('',(-0.99681128913,7.979507417375E-02,0.)); +#153093 = ORIENTED_EDGE('',*,*,#153094,.T.); +#153094 = EDGE_CURVE('',#153086,#153095,#153097,.T.); +#153095 = VERTEX_POINT('',#153096); +#153096 = CARTESIAN_POINT('',(168.08178,-109.40436,1.585)); +#153097 = LINE('',#153098,#153099); +#153098 = CARTESIAN_POINT('',(167.967633,-109.458456,1.585)); +#153099 = VECTOR('',#153100,1.); +#153100 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#153101 = ORIENTED_EDGE('',*,*,#153102,.T.); +#153102 = EDGE_CURVE('',#153095,#153103,#153105,.T.); +#153103 = VERTEX_POINT('',#153104); +#153104 = CARTESIAN_POINT('',(168.30152,-109.40436,1.585)); +#153105 = LINE('',#153106,#153107); +#153106 = CARTESIAN_POINT('',(168.08178,-109.40436,1.585)); +#153107 = VECTOR('',#153108,1.); +#153108 = DIRECTION('',(1.,0.,0.)); +#153109 = ORIENTED_EDGE('',*,*,#153110,.T.); +#153110 = EDGE_CURVE('',#153103,#153111,#153113,.T.); +#153111 = VERTEX_POINT('',#153112); +#153112 = CARTESIAN_POINT('',(168.286888,-109.552919,1.585)); +#153113 = CIRCLE('',#153114,7.500006711464E-02); +#153114 = AXIS2_PLACEMENT_3D('',#153115,#153116,#153117); +#153115 = CARTESIAN_POINT('',(168.28688806711,-109.4779189328,1.585)); +#153116 = DIRECTION('',(0.,0.,-1.)); +#153117 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#153118 = ORIENTED_EDGE('',*,*,#153119,.T.); +#153119 = EDGE_CURVE('',#153111,#153120,#153122,.T.); +#153120 = VERTEX_POINT('',#153121); +#153121 = CARTESIAN_POINT('',(168.114117,-109.552919,1.585)); +#153122 = LINE('',#153123,#153124); +#153123 = CARTESIAN_POINT('',(168.286888,-109.552919,1.585)); +#153124 = VECTOR('',#153125,1.); +#153125 = DIRECTION('',(-1.,0.,0.)); +#153126 = ORIENTED_EDGE('',*,*,#153127,.T.); +#153127 = EDGE_CURVE('',#153120,#153128,#153130,.T.); +#153128 = VERTEX_POINT('',#153129); +#153129 = CARTESIAN_POINT('',(168.045601,-109.587177,1.585)); +#153130 = LINE('',#153131,#153132); +#153131 = CARTESIAN_POINT('',(168.114117,-109.552919,1.585)); +#153132 = VECTOR('',#153133,1.); +#153133 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#153134 = ORIENTED_EDGE('',*,*,#153135,.T.); +#153135 = EDGE_CURVE('',#153128,#153136,#153138,.T.); +#153136 = VERTEX_POINT('',#153137); +#153137 = CARTESIAN_POINT('',(168.011839,-109.620938,1.585)); +#153138 = LINE('',#153139,#153140); +#153139 = CARTESIAN_POINT('',(168.045601,-109.587177,1.585)); +#153140 = VECTOR('',#153141,1.); +#153141 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#153142 = ORIENTED_EDGE('',*,*,#153143,.T.); +#153143 = EDGE_CURVE('',#153136,#153144,#153146,.T.); +#153144 = VERTEX_POINT('',#153145); +#153145 = CARTESIAN_POINT('',(167.927927,-109.746807,1.585)); +#153146 = LINE('',#153147,#153148); +#153147 = CARTESIAN_POINT('',(168.011839,-109.620938,1.585)); +#153148 = VECTOR('',#153149,1.); +#153149 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#153150 = ORIENTED_EDGE('',*,*,#153151,.T.); +#153151 = EDGE_CURVE('',#153144,#153152,#153154,.T.); +#153152 = VERTEX_POINT('',#153153); +#153153 = CARTESIAN_POINT('',(167.909403,-109.820904,1.585)); +#153154 = LINE('',#153155,#153156); +#153155 = CARTESIAN_POINT('',(167.927927,-109.746807,1.585)); +#153156 = VECTOR('',#153157,1.); +#153157 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#153158 = ORIENTED_EDGE('',*,*,#153159,.T.); +#153159 = EDGE_CURVE('',#153152,#153160,#153162,.T.); +#153160 = VERTEX_POINT('',#153161); +#153161 = CARTESIAN_POINT('',(167.986542,-109.785312,1.585)); +#153162 = LINE('',#153163,#153164); +#153163 = CARTESIAN_POINT('',(167.909403,-109.820904,1.585)); +#153164 = VECTOR('',#153165,1.); +#153165 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#153166 = ORIENTED_EDGE('',*,*,#153167,.T.); +#153167 = EDGE_CURVE('',#153160,#153168,#153170,.T.); +#153168 = VERTEX_POINT('',#153169); +#153169 = CARTESIAN_POINT('',(168.211459,-109.786534,1.585)); +#153170 = LINE('',#153171,#153172); +#153171 = CARTESIAN_POINT('',(167.986542,-109.785312,1.585)); +#153172 = VECTOR('',#153173,1.); +#153173 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#153174 = ORIENTED_EDGE('',*,*,#153175,.T.); +#153175 = EDGE_CURVE('',#153168,#153176,#153178,.T.); +#153176 = VERTEX_POINT('',#153177); +#153177 = CARTESIAN_POINT('',(168.455685,-110.034715,1.585)); +#153178 = CIRCLE('',#153179,0.348625649748); +#153179 = AXIS2_PLACEMENT_3D('',#153180,#153181,#153182); +#153180 = CARTESIAN_POINT('',(168.11828704586,-110.1224786838,1.585)); +#153181 = DIRECTION('',(0.,0.,-1.)); +#153182 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#153183 = ORIENTED_EDGE('',*,*,#153184,.T.); +#153184 = EDGE_CURVE('',#153176,#153185,#153187,.T.); +#153185 = VERTEX_POINT('',#153186); +#153186 = CARTESIAN_POINT('',(168.454463,-110.307252,1.585)); +#153187 = LINE('',#153188,#153189); +#153188 = CARTESIAN_POINT('',(168.455685,-110.034715,1.585)); +#153189 = VECTOR('',#153190,1.); +#153190 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#153191 = ORIENTED_EDGE('',*,*,#153192,.T.); +#153192 = EDGE_CURVE('',#153185,#153193,#153195,.T.); +#153193 = VERTEX_POINT('',#153194); +#153194 = CARTESIAN_POINT('',(168.206282,-110.551478,1.585)); +#153195 = CIRCLE('',#153196,0.348635327447); +#153196 = AXIS2_PLACEMENT_3D('',#153197,#153198,#153199); +#153197 = CARTESIAN_POINT('',(168.11851048129,-110.2140720841,1.585)); +#153198 = DIRECTION('',(0.,0.,-1.)); +#153199 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#153200 = ORIENTED_EDGE('',*,*,#153201,.T.); +#153201 = EDGE_CURVE('',#153193,#153202,#153204,.T.); +#153202 = VERTEX_POINT('',#153203); +#153203 = CARTESIAN_POINT('',(167.981364,-110.550256,1.585)); +#153204 = LINE('',#153205,#153206); +#153205 = CARTESIAN_POINT('',(168.206282,-110.551478,1.585)); +#153206 = VECTOR('',#153207,1.); +#153207 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#153208 = ORIENTED_EDGE('',*,*,#153209,.T.); +#153209 = EDGE_CURVE('',#153202,#153210,#153212,.T.); +#153210 = VERTEX_POINT('',#153211); +#153211 = CARTESIAN_POINT('',(167.737139,-110.302074,1.585)); +#153212 = CIRCLE('',#153213,0.348628446662); +#153213 = AXIS2_PLACEMENT_3D('',#153214,#153215,#153216); +#153214 = CARTESIAN_POINT('',(168.07453961322,-110.2143094284,1.585)); +#153215 = DIRECTION('',(0.,0.,-1.)); +#153216 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#153217 = ORIENTED_EDGE('',*,*,#153218,.T.); +#153218 = EDGE_CURVE('',#153210,#153084,#153219,.T.); +#153219 = LINE('',#153220,#153221); +#153220 = CARTESIAN_POINT('',(167.737139,-110.302074,1.585)); +#153221 = VECTOR('',#153222,1.); +#153222 = DIRECTION('',(1.928585449825E-03,0.999998140277,0.)); +#153223 = FACE_BOUND('',#153224,.F.); +#153224 = EDGE_LOOP('',(#153225,#153236,#153244,#153253,#153261,#153270, + #153278,#153287)); +#153225 = ORIENTED_EDGE('',*,*,#153226,.T.); +#153226 = EDGE_CURVE('',#153227,#153229,#153231,.T.); +#153227 = VERTEX_POINT('',#153228); +#153228 = CARTESIAN_POINT('',(168.242461,-109.968129,1.585)); +#153229 = VERTEX_POINT('',#153230); +#153230 = CARTESIAN_POINT('',(167.950363,-109.968129,1.585)); +#153231 = CIRCLE('',#153232,0.252889603602); +#153232 = AXIS2_PLACEMENT_3D('',#153233,#153234,#153235); +#153233 = CARTESIAN_POINT('',(168.096412,-110.174582,1.585)); +#153234 = DIRECTION('',(0.,0.,1.)); +#153235 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#153236 = ORIENTED_EDGE('',*,*,#153237,.T.); +#153237 = EDGE_CURVE('',#153229,#153238,#153240,.T.); +#153238 = VERTEX_POINT('',#153239); +#153239 = CARTESIAN_POINT('',(167.919956,-109.998536,1.585)); +#153240 = LINE('',#153241,#153242); +#153241 = CARTESIAN_POINT('',(167.950363,-109.968129,1.585)); +#153242 = VECTOR('',#153243,1.); +#153243 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#153244 = ORIENTED_EDGE('',*,*,#153245,.T.); +#153245 = EDGE_CURVE('',#153238,#153246,#153248,.T.); +#153246 = VERTEX_POINT('',#153247); +#153247 = CARTESIAN_POINT('',(167.919956,-110.338253,1.585)); +#153248 = CIRCLE('',#153249,0.305621483548); +#153249 = AXIS2_PLACEMENT_3D('',#153250,#153251,#153252); +#153250 = CARTESIAN_POINT('',(168.174028,-110.1683945,1.585)); +#153251 = DIRECTION('',(0.,0.,1.)); +#153252 = DIRECTION('',(-0.831328992485,0.555780627815,0.)); +#153253 = ORIENTED_EDGE('',*,*,#153254,.T.); +#153254 = EDGE_CURVE('',#153246,#153255,#153257,.T.); +#153255 = VERTEX_POINT('',#153256); +#153256 = CARTESIAN_POINT('',(167.950363,-110.368661,1.585)); +#153257 = LINE('',#153258,#153259); +#153258 = CARTESIAN_POINT('',(167.919956,-110.338253,1.585)); +#153259 = VECTOR('',#153260,1.); +#153260 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#153261 = ORIENTED_EDGE('',*,*,#153262,.T.); +#153262 = EDGE_CURVE('',#153255,#153263,#153265,.T.); +#153263 = VERTEX_POINT('',#153264); +#153264 = CARTESIAN_POINT('',(168.24246,-110.368661,1.585)); +#153265 = CIRCLE('',#153266,0.252888498466); +#153266 = AXIS2_PLACEMENT_3D('',#153267,#153268,#153269); +#153267 = CARTESIAN_POINT('',(168.0964115,-110.162209,1.585)); +#153268 = DIRECTION('',(0.,0.,1.)); +#153269 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#153270 = ORIENTED_EDGE('',*,*,#153271,.T.); +#153271 = EDGE_CURVE('',#153263,#153272,#153274,.T.); +#153272 = VERTEX_POINT('',#153273); +#153273 = CARTESIAN_POINT('',(168.272867,-110.338253,1.585)); +#153274 = LINE('',#153275,#153276); +#153275 = CARTESIAN_POINT('',(168.24246,-110.368661,1.585)); +#153276 = VECTOR('',#153277,1.); +#153277 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#153278 = ORIENTED_EDGE('',*,*,#153279,.T.); +#153279 = EDGE_CURVE('',#153272,#153280,#153282,.T.); +#153280 = VERTEX_POINT('',#153281); +#153281 = CARTESIAN_POINT('',(168.272868,-109.998536,1.585)); +#153282 = CIRCLE('',#153283,0.305616146029); +#153283 = AXIS2_PLACEMENT_3D('',#153284,#153285,#153286); +#153284 = CARTESIAN_POINT('',(168.01880192049,-110.1683937521,1.585)); +#153285 = DIRECTION('',(0.,-0.,1.)); +#153286 = DIRECTION('',(0.83132086707,-0.555792781505,-0.)); +#153287 = ORIENTED_EDGE('',*,*,#153288,.T.); +#153288 = EDGE_CURVE('',#153280,#153227,#153289,.T.); +#153289 = LINE('',#153290,#153291); +#153290 = CARTESIAN_POINT('',(168.272868,-109.998536,1.585)); +#153291 = VECTOR('',#153292,1.); +#153292 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#153293 = PLANE('',#153294); +#153294 = AXIS2_PLACEMENT_3D('',#153295,#153296,#153297); +#153295 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153296 = DIRECTION('',(0.,0.,1.)); +#153297 = DIRECTION('',(1.,0.,-0.)); +#153298 = SHELL_BASED_SURFACE_MODEL('',(#153299)); +#153299 = OPEN_SHELL('',(#153300)); +#153300 = ADVANCED_FACE('',(#153301),#153337,.T.); +#153301 = FACE_BOUND('',#153302,.F.); +#153302 = EDGE_LOOP('',(#153303,#153314,#153322,#153331)); +#153303 = ORIENTED_EDGE('',*,*,#153304,.T.); +#153304 = EDGE_CURVE('',#153305,#153307,#153309,.T.); +#153305 = VERTEX_POINT('',#153306); +#153306 = CARTESIAN_POINT('',(187.77607,-110.3931,1.585)); +#153307 = VERTEX_POINT('',#153308); +#153308 = CARTESIAN_POINT('',(187.77607,-110.2731,1.585)); +#153309 = CIRCLE('',#153310,6.000000000043E-02); +#153310 = AXIS2_PLACEMENT_3D('',#153311,#153312,#153313); +#153311 = CARTESIAN_POINT('',(187.77606977441,-110.3331,1.585)); +#153312 = DIRECTION('',(0.,0.,-1.)); +#153313 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#153314 = ORIENTED_EDGE('',*,*,#153315,.T.); +#153315 = EDGE_CURVE('',#153307,#153316,#153318,.T.); +#153316 = VERTEX_POINT('',#153317); +#153317 = CARTESIAN_POINT('',(188.05723,-110.2731,1.585)); +#153318 = LINE('',#153319,#153320); +#153319 = CARTESIAN_POINT('',(187.77607,-110.2731,1.585)); +#153320 = VECTOR('',#153321,1.); +#153321 = DIRECTION('',(1.,0.,0.)); +#153322 = ORIENTED_EDGE('',*,*,#153323,.T.); +#153323 = EDGE_CURVE('',#153316,#153324,#153326,.T.); +#153324 = VERTEX_POINT('',#153325); +#153325 = CARTESIAN_POINT('',(188.05723,-110.3931,1.585)); +#153326 = CIRCLE('',#153327,6.000000000043E-02); +#153327 = AXIS2_PLACEMENT_3D('',#153328,#153329,#153330); +#153328 = CARTESIAN_POINT('',(188.05723022558,-110.3331,1.585)); +#153329 = DIRECTION('',(0.,0.,-1.)); +#153330 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#153331 = ORIENTED_EDGE('',*,*,#153332,.T.); +#153332 = EDGE_CURVE('',#153324,#153305,#153333,.T.); +#153333 = LINE('',#153334,#153335); +#153334 = CARTESIAN_POINT('',(188.05723,-110.3931,1.585)); +#153335 = VECTOR('',#153336,1.); +#153336 = DIRECTION('',(-1.,0.,0.)); +#153337 = PLANE('',#153338); +#153338 = AXIS2_PLACEMENT_3D('',#153339,#153340,#153341); +#153339 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153340 = DIRECTION('',(0.,0.,1.)); +#153341 = DIRECTION('',(1.,0.,-0.)); +#153342 = SHELL_BASED_SURFACE_MODEL('',(#153343)); +#153343 = OPEN_SHELL('',(#153344)); +#153344 = ADVANCED_FACE('',(#153345),#153431,.T.); +#153345 = FACE_BOUND('',#153346,.F.); +#153346 = EDGE_LOOP('',(#153347,#153358,#153366,#153375,#153383,#153392, + #153400,#153408,#153416,#153425)); +#153347 = ORIENTED_EDGE('',*,*,#153348,.T.); +#153348 = EDGE_CURVE('',#153349,#153351,#153353,.T.); +#153349 = VERTEX_POINT('',#153350); +#153350 = CARTESIAN_POINT('',(195.50165,-110.0131,1.585)); +#153351 = VERTEX_POINT('',#153352); +#153352 = CARTESIAN_POINT('',(195.56165,-109.9531,1.585)); +#153353 = CIRCLE('',#153354,5.999932016253E-02); +#153354 = AXIS2_PLACEMENT_3D('',#153355,#153356,#153357); +#153355 = CARTESIAN_POINT('',(195.56164932015,-110.0130993201,1.585)); +#153356 = DIRECTION('',(0.,0.,-1.)); +#153357 = DIRECTION('',(-0.999999999936,-1.133081683199E-05,-0.)); +#153358 = ORIENTED_EDGE('',*,*,#153359,.T.); +#153359 = EDGE_CURVE('',#153351,#153360,#153362,.T.); +#153360 = VERTEX_POINT('',#153361); +#153361 = CARTESIAN_POINT('',(199.68165,-109.9531,1.585)); +#153362 = LINE('',#153363,#153364); +#153363 = CARTESIAN_POINT('',(195.56165,-109.9531,1.585)); +#153364 = VECTOR('',#153365,1.); +#153365 = DIRECTION('',(1.,0.,0.)); +#153366 = ORIENTED_EDGE('',*,*,#153367,.T.); +#153367 = EDGE_CURVE('',#153360,#153368,#153370,.T.); +#153368 = VERTEX_POINT('',#153369); +#153369 = CARTESIAN_POINT('',(199.74165,-110.0131,1.585)); +#153370 = CIRCLE('',#153371,5.999932016257E-02); +#153371 = AXIS2_PLACEMENT_3D('',#153372,#153373,#153374); +#153372 = CARTESIAN_POINT('',(199.68165067984,-110.0130993201,1.585)); +#153373 = DIRECTION('',(0.,0.,-1.)); +#153374 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#153375 = ORIENTED_EDGE('',*,*,#153376,.T.); +#153376 = EDGE_CURVE('',#153368,#153377,#153379,.T.); +#153377 = VERTEX_POINT('',#153378); +#153378 = CARTESIAN_POINT('',(199.74165,-110.1081,1.585)); +#153379 = LINE('',#153380,#153381); +#153380 = CARTESIAN_POINT('',(199.74165,-110.0131,1.585)); +#153381 = VECTOR('',#153382,1.); +#153382 = DIRECTION('',(0.,-1.,0.)); +#153383 = ORIENTED_EDGE('',*,*,#153384,.T.); +#153384 = EDGE_CURVE('',#153377,#153385,#153387,.T.); +#153385 = VERTEX_POINT('',#153386); +#153386 = CARTESIAN_POINT('',(199.626217,-110.131061,1.585)); +#153387 = CIRCLE('',#153388,6.000007318647E-02); +#153388 = AXIS2_PLACEMENT_3D('',#153389,#153390,#153391); +#153389 = CARTESIAN_POINT('',(199.68164992681,-110.1081001766,1.585)); +#153390 = DIRECTION('',(0.,0.,-1.)); +#153391 = DIRECTION('',(0.999999999996,2.944769722129E-06,0.)); +#153392 = ORIENTED_EDGE('',*,*,#153393,.T.); +#153393 = EDGE_CURVE('',#153385,#153394,#153396,.T.); +#153394 = VERTEX_POINT('',#153395); +#153395 = CARTESIAN_POINT('',(199.62165,-110.0731,1.585)); +#153396 = LINE('',#153397,#153398); +#153397 = CARTESIAN_POINT('',(199.626217,-110.131061,1.585)); +#153398 = VECTOR('',#153399,1.); +#153399 = DIRECTION('',(-7.855089539735E-02,0.99691010469,0.)); +#153400 = ORIENTED_EDGE('',*,*,#153401,.T.); +#153401 = EDGE_CURVE('',#153394,#153402,#153404,.T.); +#153402 = VERTEX_POINT('',#153403); +#153403 = CARTESIAN_POINT('',(195.62165,-110.0731,1.585)); +#153404 = LINE('',#153405,#153406); +#153405 = CARTESIAN_POINT('',(199.62165,-110.0731,1.585)); +#153406 = VECTOR('',#153407,1.); +#153407 = DIRECTION('',(-1.,0.,0.)); +#153408 = ORIENTED_EDGE('',*,*,#153409,.T.); +#153409 = EDGE_CURVE('',#153402,#153410,#153412,.T.); +#153410 = VERTEX_POINT('',#153411); +#153411 = CARTESIAN_POINT('',(195.617083,-110.131061,1.585)); +#153412 = LINE('',#153413,#153414); +#153413 = CARTESIAN_POINT('',(195.62165,-110.0731,1.585)); +#153414 = VECTOR('',#153415,1.); +#153415 = DIRECTION('',(-7.855089539686E-02,-0.99691010469,0.)); +#153416 = ORIENTED_EDGE('',*,*,#153417,.T.); +#153417 = EDGE_CURVE('',#153410,#153418,#153420,.T.); +#153418 = VERTEX_POINT('',#153419); +#153419 = CARTESIAN_POINT('',(195.50165,-110.1081,1.585)); +#153420 = CIRCLE('',#153421,6.000007318647E-02); +#153421 = AXIS2_PLACEMENT_3D('',#153422,#153423,#153424); +#153422 = CARTESIAN_POINT('',(195.56165007318,-110.1081001766,1.585)); +#153423 = DIRECTION('',(-0.,0.,-1.)); +#153424 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#153425 = ORIENTED_EDGE('',*,*,#153426,.T.); +#153426 = EDGE_CURVE('',#153418,#153349,#153427,.T.); +#153427 = LINE('',#153428,#153429); +#153428 = CARTESIAN_POINT('',(195.50165,-110.1081,1.585)); +#153429 = VECTOR('',#153430,1.); +#153430 = DIRECTION('',(0.,1.,0.)); +#153431 = PLANE('',#153432); +#153432 = AXIS2_PLACEMENT_3D('',#153433,#153434,#153435); +#153433 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153434 = DIRECTION('',(0.,0.,1.)); +#153435 = DIRECTION('',(1.,0.,-0.)); +#153436 = SHELL_BASED_SURFACE_MODEL('',(#153437)); +#153437 = OPEN_SHELL('',(#153438)); +#153438 = ADVANCED_FACE('',(#153439,#153619),#153687,.T.); +#153439 = FACE_BOUND('',#153440,.F.); +#153440 = EDGE_LOOP('',(#153441,#153452,#153460,#153468,#153476,#153484, + #153492,#153500,#153508,#153516,#153524,#153532,#153540,#153548, + #153556,#153564,#153572,#153580,#153588,#153597,#153605,#153613)); +#153441 = ORIENTED_EDGE('',*,*,#153442,.T.); +#153442 = EDGE_CURVE('',#153443,#153445,#153447,.T.); +#153443 = VERTEX_POINT('',#153444); +#153444 = CARTESIAN_POINT('',(126.086489,-107.53888,1.585)); +#153445 = VERTEX_POINT('',#153446); +#153446 = CARTESIAN_POINT('',(126.225381,-107.53888,1.585)); +#153447 = CIRCLE('',#153448,0.125001800942); +#153448 = AXIS2_PLACEMENT_3D('',#153449,#153450,#153451); +#153449 = CARTESIAN_POINT('',(126.155935,-107.642816054,1.585)); +#153450 = DIRECTION('',(0.,0.,-1.)); +#153451 = DIRECTION('',(-0.55555999575,0.831476452536,0.)); +#153452 = ORIENTED_EDGE('',*,*,#153453,.T.); +#153453 = EDGE_CURVE('',#153445,#153454,#153456,.T.); +#153454 = VERTEX_POINT('',#153455); +#153455 = CARTESIAN_POINT('',(126.235495,-107.548994,1.585)); +#153456 = LINE('',#153457,#153458); +#153457 = CARTESIAN_POINT('',(126.225381,-107.53888,1.585)); +#153458 = VECTOR('',#153459,1.); +#153459 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#153460 = ORIENTED_EDGE('',*,*,#153461,.T.); +#153461 = EDGE_CURVE('',#153454,#153462,#153464,.T.); +#153462 = VERTEX_POINT('',#153463); +#153463 = CARTESIAN_POINT('',(126.302978,-107.520216,1.585)); +#153464 = LINE('',#153465,#153466); +#153465 = CARTESIAN_POINT('',(126.235495,-107.548994,1.585)); +#153466 = VECTOR('',#153467,1.); +#153467 = DIRECTION('',(0.919850708094,0.39226862584,0.)); +#153468 = ORIENTED_EDGE('',*,*,#153469,.T.); +#153469 = EDGE_CURVE('',#153462,#153470,#153472,.T.); +#153470 = VERTEX_POINT('',#153471); +#153471 = CARTESIAN_POINT('',(126.694607,-107.520216,1.585)); +#153472 = LINE('',#153473,#153474); +#153473 = CARTESIAN_POINT('',(126.302978,-107.520216,1.585)); +#153474 = VECTOR('',#153475,1.); +#153475 = DIRECTION('',(1.,0.,0.)); +#153476 = ORIENTED_EDGE('',*,*,#153477,.T.); +#153477 = EDGE_CURVE('',#153470,#153478,#153480,.T.); +#153478 = VERTEX_POINT('',#153479); +#153479 = CARTESIAN_POINT('',(126.726123,-107.531011,1.585)); +#153480 = LINE('',#153481,#153482); +#153481 = CARTESIAN_POINT('',(126.694607,-107.520216,1.585)); +#153482 = VECTOR('',#153483,1.); +#153483 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#153484 = ORIENTED_EDGE('',*,*,#153485,.T.); +#153485 = EDGE_CURVE('',#153478,#153486,#153488,.T.); +#153486 = VERTEX_POINT('',#153487); +#153487 = CARTESIAN_POINT('',(126.918288,-107.629779,1.585)); +#153488 = LINE('',#153489,#153490); +#153489 = CARTESIAN_POINT('',(126.726123,-107.531011,1.585)); +#153490 = VECTOR('',#153491,1.); +#153491 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#153492 = ORIENTED_EDGE('',*,*,#153493,.T.); +#153493 = EDGE_CURVE('',#153486,#153494,#153496,.T.); +#153494 = VERTEX_POINT('',#153495); +#153495 = CARTESIAN_POINT('',(127.031297,-107.744795,1.585)); +#153496 = LINE('',#153497,#153498); +#153497 = CARTESIAN_POINT('',(126.918288,-107.629779,1.585)); +#153498 = VECTOR('',#153499,1.); +#153499 = DIRECTION('',(0.700855916236,-0.713302870229,0.)); +#153500 = ORIENTED_EDGE('',*,*,#153501,.T.); +#153501 = EDGE_CURVE('',#153494,#153502,#153504,.T.); +#153502 = VERTEX_POINT('',#153503); +#153503 = CARTESIAN_POINT('',(127.133639,-107.952655,1.585)); +#153504 = LINE('',#153505,#153506); +#153505 = CARTESIAN_POINT('',(127.031297,-107.744795,1.585)); +#153506 = VECTOR('',#153507,1.); +#153507 = DIRECTION('',(0.44172197285,-0.897151993088,0.)); +#153508 = ORIENTED_EDGE('',*,*,#153509,.T.); +#153509 = EDGE_CURVE('',#153502,#153510,#153512,.T.); +#153510 = VERTEX_POINT('',#153511); +#153511 = CARTESIAN_POINT('',(127.138078,-107.985671,1.585)); +#153512 = LINE('',#153513,#153514); +#153513 = CARTESIAN_POINT('',(127.133639,-107.952655,1.585)); +#153514 = VECTOR('',#153515,1.); +#153515 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#153516 = ORIENTED_EDGE('',*,*,#153517,.T.); +#153517 = EDGE_CURVE('',#153510,#153518,#153520,.T.); +#153518 = VERTEX_POINT('',#153519); +#153519 = CARTESIAN_POINT('',(127.135676,-108.524343,1.585)); +#153520 = LINE('',#153521,#153522); +#153521 = CARTESIAN_POINT('',(127.138078,-107.985671,1.585)); +#153522 = VECTOR('',#153523,1.); +#153523 = DIRECTION('',(-4.459069934991E-03,-0.999990058298,0.)); +#153524 = ORIENTED_EDGE('',*,*,#153525,.T.); +#153525 = EDGE_CURVE('',#153518,#153526,#153528,.T.); +#153526 = VERTEX_POINT('',#153527); +#153527 = CARTESIAN_POINT('',(127.124881,-108.555859,1.585)); +#153528 = LINE('',#153529,#153530); +#153529 = CARTESIAN_POINT('',(127.135676,-108.524343,1.585)); +#153530 = VECTOR('',#153531,1.); +#153531 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#153532 = ORIENTED_EDGE('',*,*,#153533,.T.); +#153533 = EDGE_CURVE('',#153526,#153534,#153536,.T.); +#153534 = VERTEX_POINT('',#153535); +#153535 = CARTESIAN_POINT('',(127.026113,-108.748024,1.585)); +#153536 = LINE('',#153537,#153538); +#153537 = CARTESIAN_POINT('',(127.124881,-108.555859,1.585)); +#153538 = VECTOR('',#153539,1.); +#153539 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#153540 = ORIENTED_EDGE('',*,*,#153541,.T.); +#153541 = EDGE_CURVE('',#153534,#153542,#153544,.T.); +#153542 = VERTEX_POINT('',#153543); +#153543 = CARTESIAN_POINT('',(126.911095,-108.861033,1.585)); +#153544 = LINE('',#153545,#153546); +#153545 = CARTESIAN_POINT('',(127.026113,-108.748024,1.585)); +#153546 = VECTOR('',#153547,1.); +#153547 = DIRECTION('',(-0.713308962756,-0.700849715454,0.)); +#153548 = ORIENTED_EDGE('',*,*,#153549,.T.); +#153549 = EDGE_CURVE('',#153542,#153550,#153552,.T.); +#153550 = VERTEX_POINT('',#153551); +#153551 = CARTESIAN_POINT('',(126.703237,-108.963375,1.585)); +#153552 = LINE('',#153553,#153554); +#153553 = CARTESIAN_POINT('',(126.911095,-108.861033,1.585)); +#153554 = VECTOR('',#153555,1.); +#153555 = DIRECTION('',(-0.897150308754,-0.441725393771,0.)); +#153556 = ORIENTED_EDGE('',*,*,#153557,.T.); +#153557 = EDGE_CURVE('',#153550,#153558,#153560,.T.); +#153558 = VERTEX_POINT('',#153559); +#153559 = CARTESIAN_POINT('',(126.670221,-108.967814,1.585)); +#153560 = LINE('',#153561,#153562); +#153561 = CARTESIAN_POINT('',(126.703237,-108.963375,1.585)); +#153562 = VECTOR('',#153563,1.); +#153563 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#153564 = ORIENTED_EDGE('',*,*,#153565,.T.); +#153565 = EDGE_CURVE('',#153558,#153566,#153568,.T.); +#153566 = VERTEX_POINT('',#153567); +#153567 = CARTESIAN_POINT('',(126.302978,-108.965412,1.585)); +#153568 = LINE('',#153569,#153570); +#153569 = CARTESIAN_POINT('',(126.670221,-108.967814,1.585)); +#153570 = VECTOR('',#153571,1.); +#153571 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#153572 = ORIENTED_EDGE('',*,*,#153573,.T.); +#153573 = EDGE_CURVE('',#153566,#153574,#153576,.T.); +#153574 = VERTEX_POINT('',#153575); +#153575 = CARTESIAN_POINT('',(126.280935,-108.958242,1.585)); +#153576 = LINE('',#153577,#153578); +#153577 = CARTESIAN_POINT('',(126.302978,-108.965412,1.585)); +#153578 = VECTOR('',#153579,1.); +#153579 = DIRECTION('',(-0.950957634454,0.309321155879,0.)); +#153580 = ORIENTED_EDGE('',*,*,#153581,.T.); +#153581 = EDGE_CURVE('',#153574,#153582,#153584,.T.); +#153582 = VERTEX_POINT('',#153583); +#153583 = CARTESIAN_POINT('',(126.278533,-109.4672,1.585)); +#153584 = LINE('',#153585,#153586); +#153585 = CARTESIAN_POINT('',(126.280935,-108.958242,1.585)); +#153586 = VECTOR('',#153587,1.); +#153587 = DIRECTION('',(-4.719393840686E-03,-0.999988863599,0.)); +#153588 = ORIENTED_EDGE('',*,*,#153589,.T.); +#153589 = EDGE_CURVE('',#153582,#153590,#153592,.T.); +#153590 = VERTEX_POINT('',#153591); +#153591 = CARTESIAN_POINT('',(126.033337,-109.4672,1.585)); +#153592 = CIRCLE('',#153593,0.1249997864); +#153593 = AXIS2_PLACEMENT_3D('',#153594,#153595,#153596); +#153594 = CARTESIAN_POINT('',(126.155935,-109.442814,1.585)); +#153595 = DIRECTION('',(-0.,0.,-1.)); +#153596 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#153597 = ORIENTED_EDGE('',*,*,#153598,.T.); +#153598 = EDGE_CURVE('',#153590,#153599,#153601,.T.); +#153599 = VERTEX_POINT('',#153600); +#153600 = CARTESIAN_POINT('',(126.033337,-107.618428,1.585)); +#153601 = LINE('',#153602,#153603); +#153602 = CARTESIAN_POINT('',(126.033337,-109.4672,1.585)); +#153603 = VECTOR('',#153604,1.); +#153604 = DIRECTION('',(0.,1.,0.)); +#153605 = ORIENTED_EDGE('',*,*,#153606,.T.); +#153606 = EDGE_CURVE('',#153599,#153607,#153609,.T.); +#153607 = VERTEX_POINT('',#153608); +#153608 = CARTESIAN_POINT('',(126.052001,-107.573368,1.585)); +#153609 = LINE('',#153610,#153611); +#153610 = CARTESIAN_POINT('',(126.033337,-107.618428,1.585)); +#153611 = VECTOR('',#153612,1.); +#153612 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#153613 = ORIENTED_EDGE('',*,*,#153614,.T.); +#153614 = EDGE_CURVE('',#153607,#153443,#153615,.T.); +#153615 = LINE('',#153616,#153617); +#153616 = CARTESIAN_POINT('',(126.052001,-107.573368,1.585)); +#153617 = VECTOR('',#153618,1.); +#153618 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#153619 = FACE_BOUND('',#153620,.F.); +#153620 = EDGE_LOOP('',(#153621,#153632,#153640,#153648,#153656,#153664, + #153672,#153681)); +#153621 = ORIENTED_EDGE('',*,*,#153622,.T.); +#153622 = EDGE_CURVE('',#153623,#153625,#153627,.T.); +#153623 = VERTEX_POINT('',#153624); +#153624 = CARTESIAN_POINT('',(126.888078,-108.015179,1.585)); +#153625 = VERTEX_POINT('',#153626); +#153626 = CARTESIAN_POINT('',(126.640713,-107.767814,1.585)); +#153627 = CIRCLE('',#153628,0.347634658406); +#153628 = AXIS2_PLACEMENT_3D('',#153629,#153630,#153631); +#153629 = CARTESIAN_POINT('',(126.551963,-108.103929,1.585)); +#153630 = DIRECTION('',(0.,0.,1.)); +#153631 = DIRECTION('',(0.96686274476,0.255296754377,-0.)); +#153632 = ORIENTED_EDGE('',*,*,#153633,.T.); +#153633 = EDGE_CURVE('',#153625,#153634,#153636,.T.); +#153634 = VERTEX_POINT('',#153635); +#153635 = CARTESIAN_POINT('',(126.356873,-107.767814,1.585)); +#153636 = LINE('',#153637,#153638); +#153637 = CARTESIAN_POINT('',(126.640713,-107.767814,1.585)); +#153638 = VECTOR('',#153639,1.); +#153639 = DIRECTION('',(-1.,0.,0.)); +#153640 = ORIENTED_EDGE('',*,*,#153641,.T.); +#153641 = EDGE_CURVE('',#153634,#153642,#153644,.T.); +#153642 = VERTEX_POINT('',#153643); +#153643 = CARTESIAN_POINT('',(126.280935,-107.805782,1.585)); +#153644 = LINE('',#153645,#153646); +#153645 = CARTESIAN_POINT('',(126.356873,-107.767814,1.585)); +#153646 = VECTOR('',#153647,1.); +#153647 = DIRECTION('',(-0.89443190233,-0.447204172715,0.)); +#153648 = ORIENTED_EDGE('',*,*,#153649,.T.); +#153649 = EDGE_CURVE('',#153642,#153650,#153652,.T.); +#153650 = VERTEX_POINT('',#153651); +#153651 = CARTESIAN_POINT('',(126.280935,-108.679845,1.585)); +#153652 = LINE('',#153653,#153654); +#153653 = CARTESIAN_POINT('',(126.280935,-107.805782,1.585)); +#153654 = VECTOR('',#153655,1.); +#153655 = DIRECTION('',(0.,-1.,0.)); +#153656 = ORIENTED_EDGE('',*,*,#153657,.T.); +#153657 = EDGE_CURVE('',#153650,#153658,#153660,.T.); +#153658 = VERTEX_POINT('',#153659); +#153659 = CARTESIAN_POINT('',(126.356873,-108.717814,1.585)); +#153660 = LINE('',#153661,#153662); +#153661 = CARTESIAN_POINT('',(126.280935,-108.679845,1.585)); +#153662 = VECTOR('',#153663,1.); +#153663 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#153664 = ORIENTED_EDGE('',*,*,#153665,.T.); +#153665 = EDGE_CURVE('',#153658,#153666,#153668,.T.); +#153666 = VERTEX_POINT('',#153667); +#153667 = CARTESIAN_POINT('',(126.640713,-108.717814,1.585)); +#153668 = LINE('',#153669,#153670); +#153669 = CARTESIAN_POINT('',(126.356873,-108.717814,1.585)); +#153670 = VECTOR('',#153671,1.); +#153671 = DIRECTION('',(1.,0.,0.)); +#153672 = ORIENTED_EDGE('',*,*,#153673,.T.); +#153673 = EDGE_CURVE('',#153666,#153674,#153676,.T.); +#153674 = VERTEX_POINT('',#153675); +#153675 = CARTESIAN_POINT('',(126.888078,-108.470448,1.585)); +#153676 = CIRCLE('',#153677,0.347638026971); +#153677 = AXIS2_PLACEMENT_3D('',#153678,#153679,#153680); +#153678 = CARTESIAN_POINT('',(126.55195995992,-108.3816963187,1.585)); +#153679 = DIRECTION('',(0.,0.,1.)); +#153680 = DIRECTION('',(0.255303025536,-0.96686108886,0.)); +#153681 = ORIENTED_EDGE('',*,*,#153682,.T.); +#153682 = EDGE_CURVE('',#153674,#153623,#153683,.T.); +#153683 = LINE('',#153684,#153685); +#153684 = CARTESIAN_POINT('',(126.888078,-108.470448,1.585)); +#153685 = VECTOR('',#153686,1.); +#153686 = DIRECTION('',(0.,1.,0.)); +#153687 = PLANE('',#153688); +#153688 = AXIS2_PLACEMENT_3D('',#153689,#153690,#153691); +#153689 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153690 = DIRECTION('',(0.,0.,1.)); +#153691 = DIRECTION('',(1.,0.,-0.)); +#153692 = SHELL_BASED_SURFACE_MODEL('',(#153693)); +#153693 = OPEN_SHELL('',(#153694)); +#153694 = ADVANCED_FACE('',(#153695,#153875),#153943,.T.); +#153695 = FACE_BOUND('',#153696,.F.); +#153696 = EDGE_LOOP('',(#153697,#153708,#153716,#153724,#153732,#153740, + #153748,#153756,#153764,#153772,#153780,#153788,#153796,#153804, + #153812,#153820,#153828,#153836,#153844,#153853,#153861,#153869)); +#153697 = ORIENTED_EDGE('',*,*,#153698,.T.); +#153698 = EDGE_CURVE('',#153699,#153701,#153703,.T.); +#153699 = VERTEX_POINT('',#153700); +#153700 = CARTESIAN_POINT('',(136.286489,-107.53888,1.585)); +#153701 = VERTEX_POINT('',#153702); +#153702 = CARTESIAN_POINT('',(136.425381,-107.53888,1.585)); +#153703 = CIRCLE('',#153704,0.125001800942); +#153704 = AXIS2_PLACEMENT_3D('',#153705,#153706,#153707); +#153705 = CARTESIAN_POINT('',(136.355935,-107.642816054,1.585)); +#153706 = DIRECTION('',(0.,0.,-1.)); +#153707 = DIRECTION('',(-0.55555999575,0.831476452536,0.)); +#153708 = ORIENTED_EDGE('',*,*,#153709,.T.); +#153709 = EDGE_CURVE('',#153701,#153710,#153712,.T.); +#153710 = VERTEX_POINT('',#153711); +#153711 = CARTESIAN_POINT('',(136.435495,-107.548994,1.585)); +#153712 = LINE('',#153713,#153714); +#153713 = CARTESIAN_POINT('',(136.425381,-107.53888,1.585)); +#153714 = VECTOR('',#153715,1.); +#153715 = DIRECTION('',(0.707106781188,-0.707106781186,0.)); +#153716 = ORIENTED_EDGE('',*,*,#153717,.T.); +#153717 = EDGE_CURVE('',#153710,#153718,#153720,.T.); +#153718 = VERTEX_POINT('',#153719); +#153719 = CARTESIAN_POINT('',(136.502978,-107.520216,1.585)); +#153720 = LINE('',#153721,#153722); +#153721 = CARTESIAN_POINT('',(136.435495,-107.548994,1.585)); +#153722 = VECTOR('',#153723,1.); +#153723 = DIRECTION('',(0.919850708095,0.39226862584,0.)); +#153724 = ORIENTED_EDGE('',*,*,#153725,.T.); +#153725 = EDGE_CURVE('',#153718,#153726,#153728,.T.); +#153726 = VERTEX_POINT('',#153727); +#153727 = CARTESIAN_POINT('',(136.894607,-107.520216,1.585)); +#153728 = LINE('',#153729,#153730); +#153729 = CARTESIAN_POINT('',(136.502978,-107.520216,1.585)); +#153730 = VECTOR('',#153731,1.); +#153731 = DIRECTION('',(1.,0.,0.)); +#153732 = ORIENTED_EDGE('',*,*,#153733,.T.); +#153733 = EDGE_CURVE('',#153726,#153734,#153736,.T.); +#153734 = VERTEX_POINT('',#153735); +#153735 = CARTESIAN_POINT('',(136.926123,-107.531011,1.585)); +#153736 = LINE('',#153737,#153738); +#153737 = CARTESIAN_POINT('',(136.894607,-107.520216,1.585)); +#153738 = VECTOR('',#153739,1.); +#153739 = DIRECTION('',(0.946042469829,-0.324042659659,0.)); +#153740 = ORIENTED_EDGE('',*,*,#153741,.T.); +#153741 = EDGE_CURVE('',#153734,#153742,#153744,.T.); +#153742 = VERTEX_POINT('',#153743); +#153743 = CARTESIAN_POINT('',(137.118288,-107.629779,1.585)); +#153744 = LINE('',#153745,#153746); +#153745 = CARTESIAN_POINT('',(136.926123,-107.531011,1.585)); +#153746 = VECTOR('',#153747,1.); +#153747 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#153748 = ORIENTED_EDGE('',*,*,#153749,.T.); +#153749 = EDGE_CURVE('',#153742,#153750,#153752,.T.); +#153750 = VERTEX_POINT('',#153751); +#153751 = CARTESIAN_POINT('',(137.231297,-107.744795,1.585)); +#153752 = LINE('',#153753,#153754); +#153753 = CARTESIAN_POINT('',(137.118288,-107.629779,1.585)); +#153754 = VECTOR('',#153755,1.); +#153755 = DIRECTION('',(0.700855916236,-0.713302870229,0.)); +#153756 = ORIENTED_EDGE('',*,*,#153757,.T.); +#153757 = EDGE_CURVE('',#153750,#153758,#153760,.T.); +#153758 = VERTEX_POINT('',#153759); +#153759 = CARTESIAN_POINT('',(137.333639,-107.952655,1.585)); +#153760 = LINE('',#153761,#153762); +#153761 = CARTESIAN_POINT('',(137.231297,-107.744795,1.585)); +#153762 = VECTOR('',#153763,1.); +#153763 = DIRECTION('',(0.44172197285,-0.897151993088,0.)); +#153764 = ORIENTED_EDGE('',*,*,#153765,.T.); +#153765 = EDGE_CURVE('',#153758,#153766,#153768,.T.); +#153766 = VERTEX_POINT('',#153767); +#153767 = CARTESIAN_POINT('',(137.338078,-107.985671,1.585)); +#153768 = LINE('',#153769,#153770); +#153769 = CARTESIAN_POINT('',(137.333639,-107.952655,1.585)); +#153770 = VECTOR('',#153771,1.); +#153771 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#153772 = ORIENTED_EDGE('',*,*,#153773,.T.); +#153773 = EDGE_CURVE('',#153766,#153774,#153776,.T.); +#153774 = VERTEX_POINT('',#153775); +#153775 = CARTESIAN_POINT('',(137.335676,-108.524343,1.585)); +#153776 = LINE('',#153777,#153778); +#153777 = CARTESIAN_POINT('',(137.338078,-107.985671,1.585)); +#153778 = VECTOR('',#153779,1.); +#153779 = DIRECTION('',(-4.459069934991E-03,-0.999990058298,0.)); +#153780 = ORIENTED_EDGE('',*,*,#153781,.T.); +#153781 = EDGE_CURVE('',#153774,#153782,#153784,.T.); +#153782 = VERTEX_POINT('',#153783); +#153783 = CARTESIAN_POINT('',(137.324881,-108.555859,1.585)); +#153784 = LINE('',#153785,#153786); +#153785 = CARTESIAN_POINT('',(137.335676,-108.524343,1.585)); +#153786 = VECTOR('',#153787,1.); +#153787 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#153788 = ORIENTED_EDGE('',*,*,#153789,.T.); +#153789 = EDGE_CURVE('',#153782,#153790,#153792,.T.); +#153790 = VERTEX_POINT('',#153791); +#153791 = CARTESIAN_POINT('',(137.226113,-108.748024,1.585)); +#153792 = LINE('',#153793,#153794); +#153793 = CARTESIAN_POINT('',(137.324881,-108.555859,1.585)); +#153794 = VECTOR('',#153795,1.); +#153795 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#153796 = ORIENTED_EDGE('',*,*,#153797,.T.); +#153797 = EDGE_CURVE('',#153790,#153798,#153800,.T.); +#153798 = VERTEX_POINT('',#153799); +#153799 = CARTESIAN_POINT('',(137.111095,-108.861033,1.585)); +#153800 = LINE('',#153801,#153802); +#153801 = CARTESIAN_POINT('',(137.226113,-108.748024,1.585)); +#153802 = VECTOR('',#153803,1.); +#153803 = DIRECTION('',(-0.713308962756,-0.700849715454,0.)); +#153804 = ORIENTED_EDGE('',*,*,#153805,.T.); +#153805 = EDGE_CURVE('',#153798,#153806,#153808,.T.); +#153806 = VERTEX_POINT('',#153807); +#153807 = CARTESIAN_POINT('',(136.903237,-108.963375,1.585)); +#153808 = LINE('',#153809,#153810); +#153809 = CARTESIAN_POINT('',(137.111095,-108.861033,1.585)); +#153810 = VECTOR('',#153811,1.); +#153811 = DIRECTION('',(-0.897150308754,-0.441725393771,0.)); +#153812 = ORIENTED_EDGE('',*,*,#153813,.T.); +#153813 = EDGE_CURVE('',#153806,#153814,#153816,.T.); +#153814 = VERTEX_POINT('',#153815); +#153815 = CARTESIAN_POINT('',(136.870221,-108.967814,1.585)); +#153816 = LINE('',#153817,#153818); +#153817 = CARTESIAN_POINT('',(136.903237,-108.963375,1.585)); +#153818 = VECTOR('',#153819,1.); +#153819 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#153820 = ORIENTED_EDGE('',*,*,#153821,.T.); +#153821 = EDGE_CURVE('',#153814,#153822,#153824,.T.); +#153822 = VERTEX_POINT('',#153823); +#153823 = CARTESIAN_POINT('',(136.502978,-108.965412,1.585)); +#153824 = LINE('',#153825,#153826); +#153825 = CARTESIAN_POINT('',(136.870221,-108.967814,1.585)); +#153826 = VECTOR('',#153827,1.); +#153827 = DIRECTION('',(-0.999978610776,6.540488513296E-03,0.)); +#153828 = ORIENTED_EDGE('',*,*,#153829,.T.); +#153829 = EDGE_CURVE('',#153822,#153830,#153832,.T.); +#153830 = VERTEX_POINT('',#153831); +#153831 = CARTESIAN_POINT('',(136.480935,-108.958242,1.585)); +#153832 = LINE('',#153833,#153834); +#153833 = CARTESIAN_POINT('',(136.502978,-108.965412,1.585)); +#153834 = VECTOR('',#153835,1.); +#153835 = DIRECTION('',(-0.950957634454,0.309321155878,0.)); +#153836 = ORIENTED_EDGE('',*,*,#153837,.T.); +#153837 = EDGE_CURVE('',#153830,#153838,#153840,.T.); +#153838 = VERTEX_POINT('',#153839); +#153839 = CARTESIAN_POINT('',(136.478533,-109.4672,1.585)); +#153840 = LINE('',#153841,#153842); +#153841 = CARTESIAN_POINT('',(136.480935,-108.958242,1.585)); +#153842 = VECTOR('',#153843,1.); +#153843 = DIRECTION('',(-4.719393840658E-03,-0.999988863599,0.)); +#153844 = ORIENTED_EDGE('',*,*,#153845,.T.); +#153845 = EDGE_CURVE('',#153838,#153846,#153848,.T.); +#153846 = VERTEX_POINT('',#153847); +#153847 = CARTESIAN_POINT('',(136.233337,-109.4672,1.585)); +#153848 = CIRCLE('',#153849,0.1249997864); +#153849 = AXIS2_PLACEMENT_3D('',#153850,#153851,#153852); +#153850 = CARTESIAN_POINT('',(136.355935,-109.442814,1.585)); +#153851 = DIRECTION('',(-0.,0.,-1.)); +#153852 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#153853 = ORIENTED_EDGE('',*,*,#153854,.T.); +#153854 = EDGE_CURVE('',#153846,#153855,#153857,.T.); +#153855 = VERTEX_POINT('',#153856); +#153856 = CARTESIAN_POINT('',(136.233337,-107.618428,1.585)); +#153857 = LINE('',#153858,#153859); +#153858 = CARTESIAN_POINT('',(136.233337,-109.4672,1.585)); +#153859 = VECTOR('',#153860,1.); +#153860 = DIRECTION('',(0.,1.,0.)); +#153861 = ORIENTED_EDGE('',*,*,#153862,.T.); +#153862 = EDGE_CURVE('',#153855,#153863,#153865,.T.); +#153863 = VERTEX_POINT('',#153864); +#153864 = CARTESIAN_POINT('',(136.252001,-107.573368,1.585)); +#153865 = LINE('',#153866,#153867); +#153866 = CARTESIAN_POINT('',(136.233337,-107.618428,1.585)); +#153867 = VECTOR('',#153868,1.); +#153868 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#153869 = ORIENTED_EDGE('',*,*,#153870,.T.); +#153870 = EDGE_CURVE('',#153863,#153699,#153871,.T.); +#153871 = LINE('',#153872,#153873); +#153872 = CARTESIAN_POINT('',(136.252001,-107.573368,1.585)); +#153873 = VECTOR('',#153874,1.); +#153874 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#153875 = FACE_BOUND('',#153876,.F.); +#153876 = EDGE_LOOP('',(#153877,#153888,#153896,#153904,#153912,#153920, + #153928,#153937)); +#153877 = ORIENTED_EDGE('',*,*,#153878,.T.); +#153878 = EDGE_CURVE('',#153879,#153881,#153883,.T.); +#153879 = VERTEX_POINT('',#153880); +#153880 = CARTESIAN_POINT('',(137.088078,-108.015179,1.585)); +#153881 = VERTEX_POINT('',#153882); +#153882 = CARTESIAN_POINT('',(136.840713,-107.767814,1.585)); +#153883 = CIRCLE('',#153884,0.347634658406); +#153884 = AXIS2_PLACEMENT_3D('',#153885,#153886,#153887); +#153885 = CARTESIAN_POINT('',(136.751963,-108.103929,1.585)); +#153886 = DIRECTION('',(0.,0.,1.)); +#153887 = DIRECTION('',(0.96686274476,0.255296754377,-0.)); +#153888 = ORIENTED_EDGE('',*,*,#153889,.T.); +#153889 = EDGE_CURVE('',#153881,#153890,#153892,.T.); +#153890 = VERTEX_POINT('',#153891); +#153891 = CARTESIAN_POINT('',(136.556873,-107.767814,1.585)); +#153892 = LINE('',#153893,#153894); +#153893 = CARTESIAN_POINT('',(136.840713,-107.767814,1.585)); +#153894 = VECTOR('',#153895,1.); +#153895 = DIRECTION('',(-1.,0.,0.)); +#153896 = ORIENTED_EDGE('',*,*,#153897,.T.); +#153897 = EDGE_CURVE('',#153890,#153898,#153900,.T.); +#153898 = VERTEX_POINT('',#153899); +#153899 = CARTESIAN_POINT('',(136.480935,-107.805782,1.585)); +#153900 = LINE('',#153901,#153902); +#153901 = CARTESIAN_POINT('',(136.556873,-107.767814,1.585)); +#153902 = VECTOR('',#153903,1.); +#153903 = DIRECTION('',(-0.89443190233,-0.447204172715,0.)); +#153904 = ORIENTED_EDGE('',*,*,#153905,.T.); +#153905 = EDGE_CURVE('',#153898,#153906,#153908,.T.); +#153906 = VERTEX_POINT('',#153907); +#153907 = CARTESIAN_POINT('',(136.480935,-108.679845,1.585)); +#153908 = LINE('',#153909,#153910); +#153909 = CARTESIAN_POINT('',(136.480935,-107.805782,1.585)); +#153910 = VECTOR('',#153911,1.); +#153911 = DIRECTION('',(0.,-1.,0.)); +#153912 = ORIENTED_EDGE('',*,*,#153913,.T.); +#153913 = EDGE_CURVE('',#153906,#153914,#153916,.T.); +#153914 = VERTEX_POINT('',#153915); +#153915 = CARTESIAN_POINT('',(136.556873,-108.717814,1.585)); +#153916 = LINE('',#153917,#153918); +#153917 = CARTESIAN_POINT('',(136.480935,-108.679845,1.585)); +#153918 = VECTOR('',#153919,1.); +#153919 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#153920 = ORIENTED_EDGE('',*,*,#153921,.T.); +#153921 = EDGE_CURVE('',#153914,#153922,#153924,.T.); +#153922 = VERTEX_POINT('',#153923); +#153923 = CARTESIAN_POINT('',(136.840713,-108.717814,1.585)); +#153924 = LINE('',#153925,#153926); +#153925 = CARTESIAN_POINT('',(136.556873,-108.717814,1.585)); +#153926 = VECTOR('',#153927,1.); +#153927 = DIRECTION('',(1.,0.,0.)); +#153928 = ORIENTED_EDGE('',*,*,#153929,.T.); +#153929 = EDGE_CURVE('',#153922,#153930,#153932,.T.); +#153930 = VERTEX_POINT('',#153931); +#153931 = CARTESIAN_POINT('',(137.088078,-108.470448,1.585)); +#153932 = CIRCLE('',#153933,0.347638026971); +#153933 = AXIS2_PLACEMENT_3D('',#153934,#153935,#153936); +#153934 = CARTESIAN_POINT('',(136.75195995992,-108.3816963187,1.585)); +#153935 = DIRECTION('',(0.,0.,1.)); +#153936 = DIRECTION('',(0.255303025536,-0.96686108886,0.)); +#153937 = ORIENTED_EDGE('',*,*,#153938,.T.); +#153938 = EDGE_CURVE('',#153930,#153879,#153939,.T.); +#153939 = LINE('',#153940,#153941); +#153940 = CARTESIAN_POINT('',(137.088078,-108.470448,1.585)); +#153941 = VECTOR('',#153942,1.); +#153942 = DIRECTION('',(0.,1.,0.)); +#153943 = PLANE('',#153944); +#153944 = AXIS2_PLACEMENT_3D('',#153945,#153946,#153947); +#153945 = CARTESIAN_POINT('',(0.,0.,1.585)); +#153946 = DIRECTION('',(0.,0.,1.)); +#153947 = DIRECTION('',(1.,0.,-0.)); +#153948 = SHELL_BASED_SURFACE_MODEL('',(#153949)); +#153949 = OPEN_SHELL('',(#153950)); +#153950 = ADVANCED_FACE('',(#153951,#154153),#154223,.T.); +#153951 = FACE_BOUND('',#153952,.F.); +#153952 = EDGE_LOOP('',(#153953,#153963,#153971,#153979,#153987,#153995, + #154003,#154011,#154019,#154027,#154035,#154043,#154051,#154059, + #154067,#154075,#154083,#154091,#154099,#154107,#154115,#154123, + #154131,#154139,#154147)); +#153953 = ORIENTED_EDGE('',*,*,#153954,.T.); +#153954 = EDGE_CURVE('',#153955,#153957,#153959,.T.); +#153955 = VERTEX_POINT('',#153956); +#153956 = CARTESIAN_POINT('',(83.000884,-107.506232,1.585)); +#153957 = VERTEX_POINT('',#153958); +#153958 = CARTESIAN_POINT('',(83.047839,-107.485432,1.585)); +#153959 = LINE('',#153960,#153961); +#153960 = CARTESIAN_POINT('',(83.000884,-107.506232,1.585)); +#153961 = VECTOR('',#153962,1.); +#153962 = DIRECTION('',(0.914308703427,0.405018017917,0.)); +#153963 = ORIENTED_EDGE('',*,*,#153964,.T.); +#153964 = EDGE_CURVE('',#153957,#153965,#153967,.T.); +#153965 = VERTEX_POINT('',#153966); +#153966 = CARTESIAN_POINT('',(83.572166,-107.357321,1.585)); +#153967 = LINE('',#153968,#153969); +#153968 = CARTESIAN_POINT('',(83.047839,-107.485432,1.585)); +#153969 = VECTOR('',#153970,1.); +#153970 = DIRECTION('',(0.971423711464,0.237352001898,0.)); +#153971 = ORIENTED_EDGE('',*,*,#153972,.T.); +#153972 = EDGE_CURVE('',#153965,#153973,#153975,.T.); +#153973 = VERTEX_POINT('',#153974); +#153974 = CARTESIAN_POINT('',(84.451226,-107.357646,1.585)); +#153975 = LINE('',#153976,#153977); +#153976 = CARTESIAN_POINT('',(83.572166,-107.357321,1.585)); +#153977 = VECTOR('',#153978,1.); +#153978 = DIRECTION('',(0.999999931656,-3.697130773689E-04,0.)); +#153979 = ORIENTED_EDGE('',*,*,#153980,.T.); +#153980 = EDGE_CURVE('',#153973,#153981,#153983,.T.); +#153981 = VERTEX_POINT('',#153982); +#153982 = CARTESIAN_POINT('',(84.482503,-107.361623,1.585)); +#153983 = LINE('',#153984,#153985); +#153984 = CARTESIAN_POINT('',(84.451226,-107.357646,1.585)); +#153985 = VECTOR('',#153986,1.); +#153986 = DIRECTION('',(0.992012638826,-0.126138512792,0.)); +#153987 = ORIENTED_EDGE('',*,*,#153988,.T.); +#153988 = EDGE_CURVE('',#153981,#153989,#153991,.T.); +#153989 = VERTEX_POINT('',#153990); +#153990 = CARTESIAN_POINT('',(85.005433,-107.495325,1.585)); +#153991 = LINE('',#153992,#153993); +#153992 = CARTESIAN_POINT('',(84.482503,-107.361623,1.585)); +#153993 = VECTOR('',#153994,1.); +#153994 = DIRECTION('',(0.968834186972,-0.247710149478,0.)); +#153995 = ORIENTED_EDGE('',*,*,#153996,.T.); +#153996 = EDGE_CURVE('',#153989,#153997,#153999,.T.); +#153997 = VERTEX_POINT('',#153998); +#153998 = CARTESIAN_POINT('',(85.047427,-107.524887,1.585)); +#153999 = LINE('',#154000,#154001); +#154000 = CARTESIAN_POINT('',(85.005433,-107.495325,1.585)); +#154001 = VECTOR('',#154002,1.); +#154002 = DIRECTION('',(0.817708654312,-0.575632310301,0.)); +#154003 = ORIENTED_EDGE('',*,*,#154004,.T.); +#154004 = EDGE_CURVE('',#153997,#154005,#154007,.T.); +#154005 = VERTEX_POINT('',#154006); +#154006 = CARTESIAN_POINT('',(85.313701,-107.795237,1.585)); +#154007 = LINE('',#154008,#154009); +#154008 = CARTESIAN_POINT('',(85.047427,-107.524887,1.585)); +#154009 = VECTOR('',#154010,1.); +#154010 = DIRECTION('',(0.701715614236,-0.712457154317,0.)); +#154011 = ORIENTED_EDGE('',*,*,#154012,.T.); +#154012 = EDGE_CURVE('',#154005,#154013,#154015,.T.); +#154013 = VERTEX_POINT('',#154014); +#154014 = CARTESIAN_POINT('',(85.457464,-108.086572,1.585)); +#154015 = LINE('',#154016,#154017); +#154016 = CARTESIAN_POINT('',(85.313701,-107.795237,1.585)); +#154017 = VECTOR('',#154018,1.); +#154018 = DIRECTION('',(0.442517646706,-0.896759796352,0.)); +#154019 = ORIENTED_EDGE('',*,*,#154020,.T.); +#154020 = EDGE_CURVE('',#154013,#154021,#154023,.T.); +#154021 = VERTEX_POINT('',#154022); +#154022 = CARTESIAN_POINT('',(85.46279,-108.126191,1.585)); +#154023 = LINE('',#154024,#154025); +#154024 = CARTESIAN_POINT('',(85.457464,-108.086572,1.585)); +#154025 = VECTOR('',#154026,1.); +#154026 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#154027 = ORIENTED_EDGE('',*,*,#154028,.T.); +#154028 = EDGE_CURVE('',#154021,#154029,#154031,.T.); +#154029 = VERTEX_POINT('',#154030); +#154030 = CARTESIAN_POINT('',(85.459908,-108.650693,1.585)); +#154031 = LINE('',#154032,#154033); +#154032 = CARTESIAN_POINT('',(85.46279,-108.126191,1.585)); +#154033 = VECTOR('',#154034,1.); +#154034 = DIRECTION('',(-5.494653012067E-03,-0.99998490428,0.)); +#154035 = ORIENTED_EDGE('',*,*,#154036,.T.); +#154036 = EDGE_CURVE('',#154029,#154037,#154039,.T.); +#154037 = VERTEX_POINT('',#154038); +#154038 = CARTESIAN_POINT('',(85.446954,-108.688511,1.585)); +#154039 = LINE('',#154040,#154041); +#154040 = CARTESIAN_POINT('',(85.459908,-108.650693,1.585)); +#154041 = VECTOR('',#154042,1.); +#154042 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#154043 = ORIENTED_EDGE('',*,*,#154044,.T.); +#154044 = EDGE_CURVE('',#154037,#154045,#154047,.T.); +#154045 = VERTEX_POINT('',#154046); +#154046 = CARTESIAN_POINT('',(85.307479,-108.961016,1.585)); +#154047 = LINE('',#154048,#154049); +#154048 = CARTESIAN_POINT('',(85.446954,-108.688511,1.585)); +#154049 = VECTOR('',#154050,1.); +#154050 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#154051 = ORIENTED_EDGE('',*,*,#154052,.T.); +#154052 = EDGE_CURVE('',#154045,#154053,#154055,.T.); +#154053 = VERTEX_POINT('',#154054); +#154054 = CARTESIAN_POINT('',(85.024696,-109.241388,1.585)); +#154055 = LINE('',#154056,#154057); +#154056 = CARTESIAN_POINT('',(85.307479,-108.961016,1.585)); +#154057 = VECTOR('',#154058,1.); +#154058 = DIRECTION('',(-0.710127564942,-0.704073037056,0.)); +#154059 = ORIENTED_EDGE('',*,*,#154060,.T.); +#154060 = EDGE_CURVE('',#154053,#154061,#154063,.T.); +#154061 = VERTEX_POINT('',#154062); +#154062 = CARTESIAN_POINT('',(84.977742,-109.262188,1.585)); +#154063 = LINE('',#154064,#154065); +#154064 = CARTESIAN_POINT('',(85.024696,-109.241388,1.585)); +#154065 = VECTOR('',#154066,1.); +#154066 = DIRECTION('',(-0.91430550916,-0.405025228745,0.)); +#154067 = ORIENTED_EDGE('',*,*,#154068,.T.); +#154068 = EDGE_CURVE('',#154061,#154069,#154071,.T.); +#154069 = VERTEX_POINT('',#154070); +#154070 = CARTESIAN_POINT('',(84.453414,-109.3903,1.585)); +#154071 = LINE('',#154072,#154073); +#154072 = CARTESIAN_POINT('',(84.977742,-109.262188,1.585)); +#154073 = VECTOR('',#154074,1.); +#154074 = DIRECTION('',(-0.971423388661,-0.23735332305,0.)); +#154075 = ORIENTED_EDGE('',*,*,#154076,.T.); +#154076 = EDGE_CURVE('',#154069,#154077,#154079,.T.); +#154077 = VERTEX_POINT('',#154078); +#154078 = CARTESIAN_POINT('',(83.550193,-109.387595,1.585)); +#154079 = LINE('',#154080,#154081); +#154080 = CARTESIAN_POINT('',(84.453414,-109.3903,1.585)); +#154081 = VECTOR('',#154082,1.); +#154082 = DIRECTION('',(-0.999995515505,2.994823935041E-03,0.)); +#154083 = ORIENTED_EDGE('',*,*,#154084,.T.); +#154084 = EDGE_CURVE('',#154077,#154085,#154087,.T.); +#154085 = VERTEX_POINT('',#154086); +#154086 = CARTESIAN_POINT('',(83.020147,-109.252295,1.585)); +#154087 = LINE('',#154088,#154089); +#154088 = CARTESIAN_POINT('',(83.550193,-109.387595,1.585)); +#154089 = VECTOR('',#154090,1.); +#154090 = DIRECTION('',(-0.968931245641,0.247330227066,0.)); +#154091 = ORIENTED_EDGE('',*,*,#154092,.T.); +#154092 = EDGE_CURVE('',#154085,#154093,#154095,.T.); +#154093 = VERTEX_POINT('',#154094); +#154094 = CARTESIAN_POINT('',(82.978153,-109.222733,1.585)); +#154095 = LINE('',#154096,#154097); +#154096 = CARTESIAN_POINT('',(83.020147,-109.252295,1.585)); +#154097 = VECTOR('',#154098,1.); +#154098 = DIRECTION('',(-0.817708654312,0.575632310301,0.)); +#154099 = ORIENTED_EDGE('',*,*,#154100,.T.); +#154100 = EDGE_CURVE('',#154093,#154101,#154103,.T.); +#154101 = VERTEX_POINT('',#154102); +#154102 = CARTESIAN_POINT('',(82.711879,-108.952383,1.585)); +#154103 = LINE('',#154104,#154105); +#154104 = CARTESIAN_POINT('',(82.978153,-109.222733,1.585)); +#154105 = VECTOR('',#154106,1.); +#154106 = DIRECTION('',(-0.701715614236,0.712457154317,0.)); +#154107 = ORIENTED_EDGE('',*,*,#154108,.T.); +#154108 = EDGE_CURVE('',#154101,#154109,#154111,.T.); +#154109 = VERTEX_POINT('',#154110); +#154110 = CARTESIAN_POINT('',(82.568116,-108.661048,1.585)); +#154111 = LINE('',#154112,#154113); +#154112 = CARTESIAN_POINT('',(82.711879,-108.952383,1.585)); +#154113 = VECTOR('',#154114,1.); +#154114 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#154115 = ORIENTED_EDGE('',*,*,#154116,.T.); +#154116 = EDGE_CURVE('',#154109,#154117,#154119,.T.); +#154117 = VERTEX_POINT('',#154118); +#154118 = CARTESIAN_POINT('',(82.56279,-108.621429,1.585)); +#154119 = LINE('',#154120,#154121); +#154120 = CARTESIAN_POINT('',(82.568116,-108.661048,1.585)); +#154121 = VECTOR('',#154122,1.); +#154122 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#154123 = ORIENTED_EDGE('',*,*,#154124,.T.); +#154124 = EDGE_CURVE('',#154117,#154125,#154127,.T.); +#154125 = VERTEX_POINT('',#154126); +#154126 = CARTESIAN_POINT('',(82.565672,-108.096927,1.585)); +#154127 = LINE('',#154128,#154129); +#154128 = CARTESIAN_POINT('',(82.56279,-108.621429,1.585)); +#154129 = VECTOR('',#154130,1.); +#154130 = DIRECTION('',(5.494653012067E-03,0.99998490428,0.)); +#154131 = ORIENTED_EDGE('',*,*,#154132,.T.); +#154132 = EDGE_CURVE('',#154125,#154133,#154135,.T.); +#154133 = VERTEX_POINT('',#154134); +#154134 = CARTESIAN_POINT('',(82.578626,-108.059109,1.585)); +#154135 = LINE('',#154136,#154137); +#154136 = CARTESIAN_POINT('',(82.565672,-108.096927,1.585)); +#154137 = VECTOR('',#154138,1.); +#154138 = DIRECTION('',(0.32405186212,0.946039317712,0.)); +#154139 = ORIENTED_EDGE('',*,*,#154140,.T.); +#154140 = EDGE_CURVE('',#154133,#154141,#154143,.T.); +#154141 = VERTEX_POINT('',#154142); +#154142 = CARTESIAN_POINT('',(82.718101,-107.786604,1.585)); +#154143 = LINE('',#154144,#154145); +#154144 = CARTESIAN_POINT('',(82.578626,-108.059109,1.585)); +#154145 = VECTOR('',#154146,1.); +#154146 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#154147 = ORIENTED_EDGE('',*,*,#154148,.T.); +#154148 = EDGE_CURVE('',#154141,#153955,#154149,.T.); +#154149 = LINE('',#154150,#154151); +#154150 = CARTESIAN_POINT('',(82.718101,-107.786604,1.585)); +#154151 = VECTOR('',#154152,1.); +#154152 = DIRECTION('',(0.710127564942,0.704073037056,0.)); +#154153 = FACE_BOUND('',#154154,.F.); +#154154 = EDGE_LOOP('',(#154155,#154166,#154174,#154183,#154191,#154200, + #154208,#154217)); +#154155 = ORIENTED_EDGE('',*,*,#154156,.T.); +#154156 = EDGE_CURVE('',#154157,#154159,#154161,.T.); +#154157 = VERTEX_POINT('',#154158); +#154158 = CARTESIAN_POINT('',(84.864674,-107.766398,1.585)); +#154159 = VERTEX_POINT('',#154160); +#154160 = CARTESIAN_POINT('',(83.160906,-107.766397,1.585)); +#154161 = CIRCLE('',#154162,2.621187449329); +#154162 = AXIS2_PLACEMENT_3D('',#154163,#154164,#154165); +#154163 = CARTESIAN_POINT('',(84.012788545052,-110.2452918694,1.585)); +#154164 = DIRECTION('',(0.,0.,1.)); +#154165 = DIRECTION('',(0.324999822186,0.945714077076,-0.)); +#154166 = ORIENTED_EDGE('',*,*,#154167,.T.); +#154167 = EDGE_CURVE('',#154159,#154168,#154170,.T.); +#154168 = VERTEX_POINT('',#154169); +#154169 = CARTESIAN_POINT('',(82.959877,-107.967426,1.585)); +#154170 = LINE('',#154171,#154172); +#154171 = CARTESIAN_POINT('',(83.160906,-107.766397,1.585)); +#154172 = VECTOR('',#154173,1.); +#154173 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#154174 = ORIENTED_EDGE('',*,*,#154175,.T.); +#154175 = EDGE_CURVE('',#154168,#154176,#154178,.T.); +#154176 = VERTEX_POINT('',#154177); +#154177 = CARTESIAN_POINT('',(82.959877,-108.780193,1.585)); +#154178 = CIRCLE('',#154179,0.700076048377); +#154179 = AXIS2_PLACEMENT_3D('',#154180,#154181,#154182); +#154180 = CARTESIAN_POINT('',(83.529928685761,-108.3738095,1.585)); +#154181 = DIRECTION('',(0.,0.,1.)); +#154182 = DIRECTION('',(-0.814271088238,0.580484792962,0.)); +#154183 = ORIENTED_EDGE('',*,*,#154184,.T.); +#154184 = EDGE_CURVE('',#154176,#154185,#154187,.T.); +#154185 = VERTEX_POINT('',#154186); +#154186 = CARTESIAN_POINT('',(83.160907,-108.981223,1.585)); +#154187 = LINE('',#154188,#154189); +#154188 = CARTESIAN_POINT('',(82.959877,-108.780193,1.585)); +#154189 = VECTOR('',#154190,1.); +#154190 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#154191 = ORIENTED_EDGE('',*,*,#154192,.T.); +#154192 = EDGE_CURVE('',#154185,#154193,#154195,.T.); +#154193 = VERTEX_POINT('',#154194); +#154194 = CARTESIAN_POINT('',(84.864672,-108.981223,1.585)); +#154195 = CIRCLE('',#154196,2.621161269852); +#154196 = AXIS2_PLACEMENT_3D('',#154197,#154198,#154199); +#154197 = CARTESIAN_POINT('',(84.0127895,-106.5023557972,1.585)); +#154198 = DIRECTION('',(0.,0.,1.)); +#154199 = DIRECTION('',(-0.325001940857,-0.94571334898,0.)); +#154200 = ORIENTED_EDGE('',*,*,#154201,.T.); +#154201 = EDGE_CURVE('',#154193,#154202,#154204,.T.); +#154202 = VERTEX_POINT('',#154203); +#154203 = CARTESIAN_POINT('',(85.065702,-108.780194,1.585)); +#154204 = LINE('',#154205,#154206); +#154205 = CARTESIAN_POINT('',(84.864672,-108.981223,1.585)); +#154206 = VECTOR('',#154207,1.); +#154207 = DIRECTION('',(0.707108539898,0.70710502247,0.)); +#154208 = ORIENTED_EDGE('',*,*,#154209,.T.); +#154209 = EDGE_CURVE('',#154202,#154210,#154212,.T.); +#154210 = VERTEX_POINT('',#154211); +#154211 = CARTESIAN_POINT('',(85.065702,-107.967426,1.585)); +#154212 = CIRCLE('',#154213,0.700073337415); +#154213 = AXIS2_PLACEMENT_3D('',#154214,#154215,#154216); +#154214 = CARTESIAN_POINT('',(84.495654,-108.37381,1.585)); +#154215 = DIRECTION('',(0.,-0.,1.)); +#154216 = DIRECTION('',(0.814268976597,-0.580487755041,-0.)); +#154217 = ORIENTED_EDGE('',*,*,#154218,.T.); +#154218 = EDGE_CURVE('',#154210,#154157,#154219,.T.); +#154219 = LINE('',#154220,#154221); +#154220 = CARTESIAN_POINT('',(85.065702,-107.967426,1.585)); +#154221 = VECTOR('',#154222,1.); +#154222 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#154223 = PLANE('',#154224); +#154224 = AXIS2_PLACEMENT_3D('',#154225,#154226,#154227); +#154225 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154226 = DIRECTION('',(0.,0.,1.)); +#154227 = DIRECTION('',(1.,0.,-0.)); +#154228 = SHELL_BASED_SURFACE_MODEL('',(#154229)); +#154229 = OPEN_SHELL('',(#154230)); +#154230 = ADVANCED_FACE('',(#154231),#154267,.T.); +#154231 = FACE_BOUND('',#154232,.F.); +#154232 = EDGE_LOOP('',(#154233,#154244,#154252,#154261)); +#154233 = ORIENTED_EDGE('',*,*,#154234,.T.); +#154234 = EDGE_CURVE('',#154235,#154237,#154239,.T.); +#154235 = VERTEX_POINT('',#154236); +#154236 = CARTESIAN_POINT('',(187.77607,-109.3731,1.585)); +#154237 = VERTEX_POINT('',#154238); +#154238 = CARTESIAN_POINT('',(187.77607,-109.2531,1.585)); +#154239 = CIRCLE('',#154240,6.000000000042E-02); +#154240 = AXIS2_PLACEMENT_3D('',#154241,#154242,#154243); +#154241 = CARTESIAN_POINT('',(187.77606977441,-109.3131,1.585)); +#154242 = DIRECTION('',(0.,0.,-1.)); +#154243 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#154244 = ORIENTED_EDGE('',*,*,#154245,.T.); +#154245 = EDGE_CURVE('',#154237,#154246,#154248,.T.); +#154246 = VERTEX_POINT('',#154247); +#154247 = CARTESIAN_POINT('',(188.05723,-109.2531,1.585)); +#154248 = LINE('',#154249,#154250); +#154249 = CARTESIAN_POINT('',(187.77607,-109.2531,1.585)); +#154250 = VECTOR('',#154251,1.); +#154251 = DIRECTION('',(1.,0.,0.)); +#154252 = ORIENTED_EDGE('',*,*,#154253,.T.); +#154253 = EDGE_CURVE('',#154246,#154254,#154256,.T.); +#154254 = VERTEX_POINT('',#154255); +#154255 = CARTESIAN_POINT('',(188.05723,-109.3731,1.585)); +#154256 = CIRCLE('',#154257,6.000000000042E-02); +#154257 = AXIS2_PLACEMENT_3D('',#154258,#154259,#154260); +#154258 = CARTESIAN_POINT('',(188.05723022558,-109.3131,1.585)); +#154259 = DIRECTION('',(0.,0.,-1.)); +#154260 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#154261 = ORIENTED_EDGE('',*,*,#154262,.T.); +#154262 = EDGE_CURVE('',#154254,#154235,#154263,.T.); +#154263 = LINE('',#154264,#154265); +#154264 = CARTESIAN_POINT('',(188.05723,-109.3731,1.585)); +#154265 = VECTOR('',#154266,1.); +#154266 = DIRECTION('',(-1.,0.,0.)); +#154267 = PLANE('',#154268); +#154268 = AXIS2_PLACEMENT_3D('',#154269,#154270,#154271); +#154269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154270 = DIRECTION('',(0.,0.,1.)); +#154271 = DIRECTION('',(1.,0.,-0.)); +#154272 = SHELL_BASED_SURFACE_MODEL('',(#154273)); +#154273 = OPEN_SHELL('',(#154274)); +#154274 = ADVANCED_FACE('',(#154275),#154391,.T.); +#154275 = FACE_BOUND('',#154276,.F.); +#154276 = EDGE_LOOP('',(#154277,#154288,#154296,#154304,#154312,#154321, + #154329,#154337,#154345,#154353,#154361,#154369,#154377,#154385)); +#154277 = ORIENTED_EDGE('',*,*,#154278,.T.); +#154278 = EDGE_CURVE('',#154279,#154281,#154283,.T.); +#154279 = VERTEX_POINT('',#154280); +#154280 = CARTESIAN_POINT('',(163.486217,-106.850139,1.585)); +#154281 = VERTEX_POINT('',#154282); +#154282 = CARTESIAN_POINT('',(163.584076,-106.830674,1.585)); +#154283 = CIRCLE('',#154284,5.999850008893E-02); +#154284 = AXIS2_PLACEMENT_3D('',#154285,#154286,#154287); +#154285 = CARTESIAN_POINT('',(163.54164907544,-106.8730977679,1.585)); +#154286 = DIRECTION('',(0.,0.,-1.)); +#154287 = DIRECTION('',(-0.923891019961,0.382655698031,0.)); +#154288 = ORIENTED_EDGE('',*,*,#154289,.T.); +#154289 = EDGE_CURVE('',#154281,#154290,#154292,.T.); +#154290 = VERTEX_POINT('',#154291); +#154291 = CARTESIAN_POINT('',(165.666503,-108.9131,1.585)); +#154292 = LINE('',#154293,#154294); +#154293 = CARTESIAN_POINT('',(163.584076,-106.830674,1.585)); +#154294 = VECTOR('',#154295,1.); +#154295 = DIRECTION('',(0.707106950966,-0.707106611407,0.)); +#154296 = ORIENTED_EDGE('',*,*,#154297,.T.); +#154297 = EDGE_CURVE('',#154290,#154298,#154300,.T.); +#154298 = VERTEX_POINT('',#154299); +#154299 = CARTESIAN_POINT('',(169.716798,-108.9131,1.585)); +#154300 = LINE('',#154301,#154302); +#154301 = CARTESIAN_POINT('',(165.666503,-108.9131,1.585)); +#154302 = VECTOR('',#154303,1.); +#154303 = DIRECTION('',(1.,0.,0.)); +#154304 = ORIENTED_EDGE('',*,*,#154305,.T.); +#154305 = EDGE_CURVE('',#154298,#154306,#154308,.T.); +#154306 = VERTEX_POINT('',#154307); +#154307 = CARTESIAN_POINT('',(171.799223,-106.830674,1.585)); +#154308 = LINE('',#154309,#154310); +#154309 = CARTESIAN_POINT('',(169.716798,-108.9131,1.585)); +#154310 = VECTOR('',#154311,1.); +#154311 = DIRECTION('',(0.707106611407,0.707106950966,0.)); +#154312 = ORIENTED_EDGE('',*,*,#154313,.T.); +#154313 = EDGE_CURVE('',#154306,#154314,#154316,.T.); +#154314 = VERTEX_POINT('',#154315); +#154315 = CARTESIAN_POINT('',(171.884076,-106.915527,1.585)); +#154316 = CIRCLE('',#154317,6.000013170922E-02); +#154317 = AXIS2_PLACEMENT_3D('',#154318,#154319,#154320); +#154318 = CARTESIAN_POINT('',(171.8416500587,-106.8730999412,1.585)); +#154319 = DIRECTION('',(0.,0.,-1.)); +#154320 = DIRECTION('',(-0.707116092923,0.707097469327,0.)); +#154321 = ORIENTED_EDGE('',*,*,#154322,.T.); +#154322 = EDGE_CURVE('',#154314,#154323,#154325,.T.); +#154323 = VERTEX_POINT('',#154324); +#154324 = CARTESIAN_POINT('',(169.784076,-109.015526,1.585)); +#154325 = LINE('',#154326,#154327); +#154326 = CARTESIAN_POINT('',(171.884076,-106.915527,1.585)); +#154327 = VECTOR('',#154328,1.); +#154328 = DIRECTION('',(-0.707106949545,-0.707106612828,0.)); +#154329 = ORIENTED_EDGE('',*,*,#154330,.T.); +#154330 = EDGE_CURVE('',#154323,#154331,#154333,.T.); +#154331 = VERTEX_POINT('',#154332); +#154332 = CARTESIAN_POINT('',(169.764611,-109.028533,1.585)); +#154333 = LINE('',#154334,#154335); +#154334 = CARTESIAN_POINT('',(169.784076,-109.015526,1.585)); +#154335 = VECTOR('',#154336,1.); +#154336 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#154337 = ORIENTED_EDGE('',*,*,#154338,.T.); +#154338 = EDGE_CURVE('',#154331,#154339,#154341,.T.); +#154339 = VERTEX_POINT('',#154340); +#154340 = CARTESIAN_POINT('',(169.74165,-109.0331,1.585)); +#154341 = LINE('',#154342,#154343); +#154342 = CARTESIAN_POINT('',(169.764611,-109.028533,1.585)); +#154343 = VECTOR('',#154344,1.); +#154344 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#154345 = ORIENTED_EDGE('',*,*,#154346,.T.); +#154346 = EDGE_CURVE('',#154339,#154347,#154349,.T.); +#154347 = VERTEX_POINT('',#154348); +#154348 = CARTESIAN_POINT('',(165.64165,-109.0331,1.585)); +#154349 = LINE('',#154350,#154351); +#154350 = CARTESIAN_POINT('',(169.74165,-109.0331,1.585)); +#154351 = VECTOR('',#154352,1.); +#154352 = DIRECTION('',(-1.,0.,0.)); +#154353 = ORIENTED_EDGE('',*,*,#154354,.T.); +#154354 = EDGE_CURVE('',#154347,#154355,#154357,.T.); +#154355 = VERTEX_POINT('',#154356); +#154356 = CARTESIAN_POINT('',(165.618688,-109.028533,1.585)); +#154357 = LINE('',#154358,#154359); +#154358 = CARTESIAN_POINT('',(165.64165,-109.0331,1.585)); +#154359 = VECTOR('',#154360,1.); +#154360 = DIRECTION('',(-0.980788760097,0.195072827601,0.)); +#154361 = ORIENTED_EDGE('',*,*,#154362,.T.); +#154362 = EDGE_CURVE('',#154355,#154363,#154365,.T.); +#154363 = VERTEX_POINT('',#154364); +#154364 = CARTESIAN_POINT('',(165.599223,-109.015526,1.585)); +#154365 = LINE('',#154366,#154367); +#154366 = CARTESIAN_POINT('',(165.618688,-109.028533,1.585)); +#154367 = VECTOR('',#154368,1.); +#154368 = DIRECTION('',(-0.831451797698,0.555596893535,0.)); +#154369 = ORIENTED_EDGE('',*,*,#154370,.T.); +#154370 = EDGE_CURVE('',#154363,#154371,#154373,.T.); +#154371 = VERTEX_POINT('',#154372); +#154372 = CARTESIAN_POINT('',(163.499224,-106.915526,1.585)); +#154373 = LINE('',#154374,#154375); +#154374 = CARTESIAN_POINT('',(165.599223,-109.015526,1.585)); +#154375 = VECTOR('',#154376,1.); +#154376 = DIRECTION('',(-0.707106612828,0.707106949545,0.)); +#154377 = ORIENTED_EDGE('',*,*,#154378,.T.); +#154378 = EDGE_CURVE('',#154371,#154379,#154381,.T.); +#154379 = VERTEX_POINT('',#154380); +#154380 = CARTESIAN_POINT('',(163.486217,-106.896061,1.585)); +#154381 = LINE('',#154382,#154383); +#154382 = CARTESIAN_POINT('',(163.499224,-106.915526,1.585)); +#154383 = VECTOR('',#154384,1.); +#154384 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#154385 = ORIENTED_EDGE('',*,*,#154386,.T.); +#154386 = EDGE_CURVE('',#154379,#154279,#154387,.T.); +#154387 = LINE('',#154388,#154389); +#154388 = CARTESIAN_POINT('',(163.486217,-106.896061,1.585)); +#154389 = VECTOR('',#154390,1.); +#154390 = DIRECTION('',(0.,1.,0.)); +#154391 = PLANE('',#154392); +#154392 = AXIS2_PLACEMENT_3D('',#154393,#154394,#154395); +#154393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154394 = DIRECTION('',(0.,0.,1.)); +#154395 = DIRECTION('',(1.,0.,-0.)); +#154396 = SHELL_BASED_SURFACE_MODEL('',(#154397)); +#154397 = OPEN_SHELL('',(#154398)); +#154398 = ADVANCED_FACE('',(#154399),#154580,.T.); +#154399 = FACE_BOUND('',#154400,.F.); +#154400 = EDGE_LOOP('',(#154401,#154412,#154420,#154428,#154436,#154444, + #154452,#154460,#154468,#154477,#154485,#154494,#154502,#154510, + #154518,#154526,#154534,#154542,#154550,#154558,#154566,#154574)); +#154401 = ORIENTED_EDGE('',*,*,#154402,.T.); +#154402 = EDGE_CURVE('',#154403,#154405,#154407,.T.); +#154403 = VERTEX_POINT('',#154404); +#154404 = CARTESIAN_POINT('',(119.486489,-107.53888,1.585)); +#154405 = VERTEX_POINT('',#154406); +#154406 = CARTESIAN_POINT('',(119.678533,-107.618428,1.585)); +#154407 = CIRCLE('',#154408,0.124999692383); +#154408 = AXIS2_PLACEMENT_3D('',#154409,#154410,#154411); +#154409 = CARTESIAN_POINT('',(119.555935,-107.642813518,1.585)); +#154410 = DIRECTION('',(0.,0.,-1.)); +#154411 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#154412 = ORIENTED_EDGE('',*,*,#154413,.T.); +#154413 = EDGE_CURVE('',#154405,#154414,#154416,.T.); +#154414 = VERTEX_POINT('',#154415); +#154415 = CARTESIAN_POINT('',(119.680935,-108.556162,1.585)); +#154416 = LINE('',#154417,#154418); +#154417 = CARTESIAN_POINT('',(119.678533,-107.618428,1.585)); +#154418 = VECTOR('',#154419,1.); +#154419 = DIRECTION('',(2.561485581177E-03,-0.99999671939,0.)); +#154420 = ORIENTED_EDGE('',*,*,#154421,.T.); +#154421 = EDGE_CURVE('',#154414,#154422,#154424,.T.); +#154422 = VERTEX_POINT('',#154423); +#154423 = CARTESIAN_POINT('',(119.734818,-108.66393,1.585)); +#154424 = LINE('',#154425,#154426); +#154425 = CARTESIAN_POINT('',(119.680935,-108.556162,1.585)); +#154426 = VECTOR('',#154427,1.); +#154427 = DIRECTION('',(0.447206955813,-0.894430510812,0.)); +#154428 = ORIENTED_EDGE('',*,*,#154429,.T.); +#154429 = EDGE_CURVE('',#154422,#154430,#154432,.T.); +#154430 = VERTEX_POINT('',#154431); +#154431 = CARTESIAN_POINT('',(119.842587,-108.717814,1.585)); +#154432 = LINE('',#154433,#154434); +#154433 = CARTESIAN_POINT('',(119.734818,-108.66393,1.585)); +#154434 = VECTOR('',#154435,1.); +#154435 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#154436 = ORIENTED_EDGE('',*,*,#154437,.T.); +#154437 = EDGE_CURVE('',#154430,#154438,#154440,.T.); +#154438 = VERTEX_POINT('',#154439); +#154439 = CARTESIAN_POINT('',(120.040713,-108.717814,1.585)); +#154440 = LINE('',#154441,#154442); +#154441 = CARTESIAN_POINT('',(119.842587,-108.717814,1.585)); +#154442 = VECTOR('',#154443,1.); +#154443 = DIRECTION('',(1.,0.,0.)); +#154444 = ORIENTED_EDGE('',*,*,#154445,.T.); +#154445 = EDGE_CURVE('',#154438,#154446,#154448,.T.); +#154446 = VERTEX_POINT('',#154447); +#154447 = CARTESIAN_POINT('',(120.167604,-108.654368,1.585)); +#154448 = LINE('',#154449,#154450); +#154449 = CARTESIAN_POINT('',(120.040713,-108.717814,1.585)); +#154450 = VECTOR('',#154451,1.); +#154451 = DIRECTION('',(0.894425781241,0.447216415007,0.)); +#154452 = ORIENTED_EDGE('',*,*,#154453,.T.); +#154453 = EDGE_CURVE('',#154446,#154454,#154456,.T.); +#154454 = VERTEX_POINT('',#154455); +#154455 = CARTESIAN_POINT('',(120.202364,-108.619608,1.585)); +#154456 = LINE('',#154457,#154458); +#154457 = CARTESIAN_POINT('',(120.167604,-108.654368,1.585)); +#154458 = VECTOR('',#154459,1.); +#154459 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#154460 = ORIENTED_EDGE('',*,*,#154461,.T.); +#154461 = EDGE_CURVE('',#154454,#154462,#154464,.T.); +#154462 = VERTEX_POINT('',#154463); +#154463 = CARTESIAN_POINT('',(120.204766,-107.618428,1.585)); +#154464 = LINE('',#154465,#154466); +#154465 = CARTESIAN_POINT('',(120.202364,-108.619608,1.585)); +#154466 = VECTOR('',#154467,1.); +#154467 = DIRECTION('',(2.399162075814E-03,0.999997122007,0.)); +#154468 = ORIENTED_EDGE('',*,*,#154469,.T.); +#154469 = EDGE_CURVE('',#154462,#154470,#154472,.T.); +#154470 = VERTEX_POINT('',#154471); +#154471 = CARTESIAN_POINT('',(120.449962,-107.618428,1.585)); +#154472 = CIRCLE('',#154473,0.1249997864); +#154473 = AXIS2_PLACEMENT_3D('',#154474,#154475,#154476); +#154474 = CARTESIAN_POINT('',(120.327364,-107.642814,1.585)); +#154475 = DIRECTION('',(0.,0.,-1.)); +#154476 = DIRECTION('',(-0.980785675968,0.195088333367,0.)); +#154477 = ORIENTED_EDGE('',*,*,#154478,.T.); +#154478 = EDGE_CURVE('',#154470,#154479,#154481,.T.); +#154479 = VERTEX_POINT('',#154480); +#154480 = CARTESIAN_POINT('',(120.449962,-108.8672,1.585)); +#154481 = LINE('',#154482,#154483); +#154482 = CARTESIAN_POINT('',(120.449962,-107.618428,1.585)); +#154483 = VECTOR('',#154484,1.); +#154484 = DIRECTION('',(0.,-1.,0.)); +#154485 = ORIENTED_EDGE('',*,*,#154486,.T.); +#154486 = EDGE_CURVE('',#154479,#154487,#154489,.T.); +#154487 = VERTEX_POINT('',#154488); +#154488 = CARTESIAN_POINT('',(120.221269,-108.907044,1.585)); +#154489 = CIRCLE('',#154490,0.124243345352); +#154490 = AXIS2_PLACEMENT_3D('',#154491,#154492,#154493); +#154491 = CARTESIAN_POINT('',(120.32800817782,-108.8434581778,1.585)); +#154492 = DIRECTION('',(-0.,0.,-1.)); +#154493 = DIRECTION('',(0.981572267174,-0.191091298378,-0.)); +#154494 = ORIENTED_EDGE('',*,*,#154495,.T.); +#154495 = EDGE_CURVE('',#154487,#154496,#154498,.T.); +#154496 = VERTEX_POINT('',#154497); +#154497 = CARTESIAN_POINT('',(120.103237,-108.963375,1.585)); +#154498 = LINE('',#154499,#154500); +#154499 = CARTESIAN_POINT('',(120.221269,-108.907044,1.585)); +#154500 = VECTOR('',#154501,1.); +#154501 = DIRECTION('',(-0.902488333165,-0.430714300321,0.)); +#154502 = ORIENTED_EDGE('',*,*,#154503,.T.); +#154503 = EDGE_CURVE('',#154496,#154504,#154506,.T.); +#154504 = VERTEX_POINT('',#154505); +#154505 = CARTESIAN_POINT('',(120.070221,-108.967814,1.585)); +#154506 = LINE('',#154507,#154508); +#154507 = CARTESIAN_POINT('',(120.103237,-108.963375,1.585)); +#154508 = VECTOR('',#154509,1.); +#154509 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#154510 = ORIENTED_EDGE('',*,*,#154511,.T.); +#154511 = EDGE_CURVE('',#154504,#154512,#154514,.T.); +#154512 = VERTEX_POINT('',#154513); +#154513 = CARTESIAN_POINT('',(119.788692,-108.965412,1.585)); +#154514 = LINE('',#154515,#154516); +#154515 = CARTESIAN_POINT('',(120.070221,-108.967814,1.585)); +#154516 = VECTOR('',#154517,1.); +#154517 = DIRECTION('',(-0.99996360464,8.531670195069E-03,0.)); +#154518 = ORIENTED_EDGE('',*,*,#154519,.T.); +#154519 = EDGE_CURVE('',#154512,#154520,#154522,.T.); +#154520 = VERTEX_POINT('',#154521); +#154521 = CARTESIAN_POINT('',(119.757176,-108.954617,1.585)); +#154522 = LINE('',#154523,#154524); +#154523 = CARTESIAN_POINT('',(119.788692,-108.965412,1.585)); +#154524 = VECTOR('',#154525,1.); +#154525 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#154526 = ORIENTED_EDGE('',*,*,#154527,.T.); +#154527 = EDGE_CURVE('',#154520,#154528,#154530,.T.); +#154528 = VERTEX_POINT('',#154529); +#154529 = CARTESIAN_POINT('',(119.56501,-108.855849,1.585)); +#154530 = LINE('',#154531,#154532); +#154531 = CARTESIAN_POINT('',(119.757176,-108.954617,1.585)); +#154532 = VECTOR('',#154533,1.); +#154533 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#154534 = ORIENTED_EDGE('',*,*,#154535,.T.); +#154535 = EDGE_CURVE('',#154528,#154536,#154538,.T.); +#154536 = VERTEX_POINT('',#154537); +#154537 = CARTESIAN_POINT('',(119.532412,-108.81708,1.585)); +#154538 = LINE('',#154539,#154540); +#154539 = CARTESIAN_POINT('',(119.56501,-108.855849,1.585)); +#154540 = VECTOR('',#154541,1.); +#154541 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#154542 = ORIENTED_EDGE('',*,*,#154543,.T.); +#154543 = EDGE_CURVE('',#154536,#154544,#154546,.T.); +#154544 = VERTEX_POINT('',#154545); +#154545 = CARTESIAN_POINT('',(119.435374,-108.618687,1.585)); +#154546 = LINE('',#154547,#154548); +#154547 = CARTESIAN_POINT('',(119.532412,-108.81708,1.585)); +#154548 = VECTOR('',#154549,1.); +#154549 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#154550 = ORIENTED_EDGE('',*,*,#154551,.T.); +#154551 = EDGE_CURVE('',#154544,#154552,#154554,.T.); +#154552 = VERTEX_POINT('',#154553); +#154553 = CARTESIAN_POINT('',(119.430935,-108.585671,1.585)); +#154554 = LINE('',#154555,#154556); +#154555 = CARTESIAN_POINT('',(119.435374,-108.618687,1.585)); +#154556 = VECTOR('',#154557,1.); +#154557 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#154558 = ORIENTED_EDGE('',*,*,#154559,.T.); +#154559 = EDGE_CURVE('',#154552,#154560,#154562,.T.); +#154560 = VERTEX_POINT('',#154561); +#154561 = CARTESIAN_POINT('',(119.433337,-107.618428,1.585)); +#154562 = LINE('',#154563,#154564); +#154563 = CARTESIAN_POINT('',(119.430935,-108.585671,1.585)); +#154564 = VECTOR('',#154565,1.); +#154565 = DIRECTION('',(2.483339340209E-03,0.999996916508,0.)); +#154566 = ORIENTED_EDGE('',*,*,#154567,.T.); +#154567 = EDGE_CURVE('',#154560,#154568,#154570,.T.); +#154568 = VERTEX_POINT('',#154569); +#154569 = CARTESIAN_POINT('',(119.452001,-107.573368,1.585)); +#154570 = LINE('',#154571,#154572); +#154571 = CARTESIAN_POINT('',(119.433337,-107.618428,1.585)); +#154572 = VECTOR('',#154573,1.); +#154573 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#154574 = ORIENTED_EDGE('',*,*,#154575,.T.); +#154575 = EDGE_CURVE('',#154568,#154403,#154576,.T.); +#154576 = LINE('',#154577,#154578); +#154577 = CARTESIAN_POINT('',(119.452001,-107.573368,1.585)); +#154578 = VECTOR('',#154579,1.); +#154579 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#154580 = PLANE('',#154581); +#154581 = AXIS2_PLACEMENT_3D('',#154582,#154583,#154584); +#154582 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154583 = DIRECTION('',(0.,0.,1.)); +#154584 = DIRECTION('',(1.,0.,-0.)); +#154585 = SHELL_BASED_SURFACE_MODEL('',(#154586)); +#154586 = OPEN_SHELL('',(#154587)); +#154587 = ADVANCED_FACE('',(#154588),#154938,.T.); +#154588 = FACE_BOUND('',#154589,.F.); +#154589 = EDGE_LOOP('',(#154590,#154600,#154608,#154616,#154624,#154632, + #154641,#154649,#154657,#154666,#154674,#154682,#154690,#154698, + #154706,#154714,#154722,#154730,#154738,#154746,#154754,#154762, + #154770,#154778,#154786,#154794,#154802,#154811,#154819,#154827, + #154836,#154844,#154852,#154860,#154868,#154876,#154884,#154892, + #154900,#154908,#154916,#154924,#154932)); +#154590 = ORIENTED_EDGE('',*,*,#154591,.T.); +#154591 = EDGE_CURVE('',#154592,#154594,#154596,.T.); +#154592 = VERTEX_POINT('',#154593); +#154593 = CARTESIAN_POINT('',(121.200774,-107.024595,1.585)); +#154594 = VERTEX_POINT('',#154595); +#154595 = CARTESIAN_POINT('',(121.408633,-106.922253,1.585)); +#154596 = LINE('',#154597,#154598); +#154597 = CARTESIAN_POINT('',(121.200774,-107.024595,1.585)); +#154598 = VECTOR('',#154599,1.); +#154599 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#154600 = ORIENTED_EDGE('',*,*,#154601,.T.); +#154601 = EDGE_CURVE('',#154594,#154602,#154604,.T.); +#154602 = VERTEX_POINT('',#154603); +#154603 = CARTESIAN_POINT('',(121.441649,-106.917814,1.585)); +#154604 = LINE('',#154605,#154606); +#154605 = CARTESIAN_POINT('',(121.408633,-106.922253,1.585)); +#154606 = VECTOR('',#154607,1.); +#154607 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#154608 = ORIENTED_EDGE('',*,*,#154609,.T.); +#154609 = EDGE_CURVE('',#154602,#154610,#154612,.T.); +#154610 = VERTEX_POINT('',#154611); +#154611 = CARTESIAN_POINT('',(121.882563,-106.919029,1.585)); +#154612 = LINE('',#154613,#154614); +#154613 = CARTESIAN_POINT('',(121.441649,-106.917814,1.585)); +#154614 = VECTOR('',#154615,1.); +#154615 = DIRECTION('',(0.999996203247,-2.755628959237E-03,0.)); +#154616 = ORIENTED_EDGE('',*,*,#154617,.T.); +#154617 = EDGE_CURVE('',#154610,#154618,#154620,.T.); +#154618 = VERTEX_POINT('',#154619); +#154619 = CARTESIAN_POINT('',(121.909748,-106.924229,1.585)); +#154620 = LINE('',#154621,#154622); +#154621 = CARTESIAN_POINT('',(121.882563,-106.919029,1.585)); +#154622 = VECTOR('',#154623,1.); +#154623 = DIRECTION('',(0.982192801029,-0.187875761095,0.)); +#154624 = ORIENTED_EDGE('',*,*,#154625,.T.); +#154625 = EDGE_CURVE('',#154618,#154626,#154628,.T.); +#154626 = VERTEX_POINT('',#154627); +#154627 = CARTESIAN_POINT('',(122.189266,-107.019933,1.585)); +#154628 = LINE('',#154629,#154630); +#154629 = CARTESIAN_POINT('',(121.909748,-106.924229,1.585)); +#154630 = VECTOR('',#154631,1.); +#154631 = DIRECTION('',(0.946081626447,-0.323928319384,0.)); +#154632 = ORIENTED_EDGE('',*,*,#154633,.T.); +#154633 = EDGE_CURVE('',#154626,#154634,#154636,.T.); +#154634 = VERTEX_POINT('',#154635); +#154635 = CARTESIAN_POINT('',(122.111728,-107.252546,1.585)); +#154636 = CIRCLE('',#154637,0.12499954004); +#154637 = AXIS2_PLACEMENT_3D('',#154638,#154639,#154640); +#154638 = CARTESIAN_POINT('',(122.12736298876,-107.1285281297,1.585)); +#154639 = DIRECTION('',(0.,0.,-1.)); +#154640 = DIRECTION('',(0.495225912188,0.868764234932,0.)); +#154641 = ORIENTED_EDGE('',*,*,#154642,.T.); +#154642 = EDGE_CURVE('',#154634,#154643,#154645,.T.); +#154643 = VERTEX_POINT('',#154644); +#154644 = CARTESIAN_POINT('',(121.849937,-107.167814,1.585)); +#154645 = LINE('',#154646,#154647); +#154646 = CARTESIAN_POINT('',(122.111728,-107.252546,1.585)); +#154647 = VECTOR('',#154648,1.); +#154648 = DIRECTION('',(-0.951407352598,0.307935138337,0.)); +#154649 = ORIENTED_EDGE('',*,*,#154650,.T.); +#154650 = EDGE_CURVE('',#154643,#154651,#154653,.T.); +#154651 = VERTEX_POINT('',#154652); +#154652 = CARTESIAN_POINT('',(121.471158,-107.167814,1.585)); +#154653 = LINE('',#154654,#154655); +#154654 = CARTESIAN_POINT('',(121.849937,-107.167814,1.585)); +#154655 = VECTOR('',#154656,1.); +#154656 = DIRECTION('',(-1.,0.,0.)); +#154657 = ORIENTED_EDGE('',*,*,#154658,.T.); +#154658 = EDGE_CURVE('',#154651,#154659,#154661,.T.); +#154659 = VERTEX_POINT('',#154660); +#154660 = CARTESIAN_POINT('',(121.223792,-107.415179,1.585)); +#154661 = CIRCLE('',#154662,0.347626269899); +#154662 = AXIS2_PLACEMENT_3D('',#154663,#154664,#154665); +#154663 = CARTESIAN_POINT('',(121.55990006136,-107.5039224201,1.585)); +#154664 = DIRECTION('',(0.,0.,1.)); +#154665 = DIRECTION('',(-0.255280078187,0.966867147896,0.)); +#154666 = ORIENTED_EDGE('',*,*,#154667,.T.); +#154667 = EDGE_CURVE('',#154659,#154668,#154670,.T.); +#154668 = VERTEX_POINT('',#154669); +#154669 = CARTESIAN_POINT('',(121.223792,-107.527592,1.585)); +#154670 = LINE('',#154671,#154672); +#154671 = CARTESIAN_POINT('',(121.223792,-107.415179,1.585)); +#154672 = VECTOR('',#154673,1.); +#154673 = DIRECTION('',(0.,-1.,0.)); +#154674 = ORIENTED_EDGE('',*,*,#154675,.T.); +#154675 = EDGE_CURVE('',#154668,#154676,#154678,.T.); +#154676 = VERTEX_POINT('',#154677); +#154677 = CARTESIAN_POINT('',(121.287238,-107.654484,1.585)); +#154678 = LINE('',#154679,#154680); +#154679 = CARTESIAN_POINT('',(121.223792,-107.527592,1.585)); +#154680 = VECTOR('',#154681,1.); +#154681 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#154682 = ORIENTED_EDGE('',*,*,#154683,.T.); +#154683 = EDGE_CURVE('',#154676,#154684,#154686,.T.); +#154684 = VERTEX_POINT('',#154685); +#154685 = CARTESIAN_POINT('',(121.344264,-107.71151,1.585)); +#154686 = LINE('',#154687,#154688); +#154687 = CARTESIAN_POINT('',(121.287238,-107.654484,1.585)); +#154688 = VECTOR('',#154689,1.); +#154689 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#154690 = ORIENTED_EDGE('',*,*,#154691,.T.); +#154691 = EDGE_CURVE('',#154684,#154692,#154694,.T.); +#154692 = VERTEX_POINT('',#154693); +#154693 = CARTESIAN_POINT('',(121.485276,-107.782016,1.585)); +#154694 = LINE('',#154695,#154696); +#154695 = CARTESIAN_POINT('',(121.344264,-107.71151,1.585)); +#154696 = VECTOR('',#154697,1.); +#154697 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#154698 = ORIENTED_EDGE('',*,*,#154699,.T.); +#154699 = EDGE_CURVE('',#154692,#154700,#154702,.T.); +#154700 = VERTEX_POINT('',#154701); +#154701 = CARTESIAN_POINT('',(121.840407,-107.873867,1.585)); +#154702 = LINE('',#154703,#154704); +#154703 = CARTESIAN_POINT('',(121.485276,-107.782016,1.585)); +#154704 = VECTOR('',#154705,1.); +#154705 = DIRECTION('',(0.968142433695,-0.250400135942,0.)); +#154706 = ORIENTED_EDGE('',*,*,#154707,.T.); +#154707 = EDGE_CURVE('',#154700,#154708,#154710,.T.); +#154708 = VERTEX_POINT('',#154709); +#154709 = CARTESIAN_POINT('',(122.032574,-107.972635,1.585)); +#154710 = LINE('',#154711,#154712); +#154711 = CARTESIAN_POINT('',(121.840407,-107.873867,1.585)); +#154712 = VECTOR('',#154713,1.); +#154713 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#154714 = ORIENTED_EDGE('',*,*,#154715,.T.); +#154715 = EDGE_CURVE('',#154708,#154716,#154718,.T.); +#154716 = VERTEX_POINT('',#154717); +#154717 = CARTESIAN_POINT('',(122.145583,-108.087655,1.585)); +#154718 = LINE('',#154719,#154720); +#154719 = CARTESIAN_POINT('',(122.032574,-107.972635,1.585)); +#154720 = VECTOR('',#154721,1.); +#154721 = DIRECTION('',(0.700843514729,-0.713315055121,0.)); +#154722 = ORIENTED_EDGE('',*,*,#154723,.T.); +#154723 = EDGE_CURVE('',#154716,#154724,#154726,.T.); +#154724 = VERTEX_POINT('',#154725); +#154725 = CARTESIAN_POINT('',(122.247924,-108.295512,1.585)); +#154726 = LINE('',#154727,#154728); +#154727 = CARTESIAN_POINT('',(122.145583,-108.087655,1.585)); +#154728 = VECTOR('',#154729,1.); +#154729 = DIRECTION('',(0.44172363024,-0.897151177053,0.)); +#154730 = ORIENTED_EDGE('',*,*,#154731,.T.); +#154731 = EDGE_CURVE('',#154724,#154732,#154734,.T.); +#154732 = VERTEX_POINT('',#154733); +#154733 = CARTESIAN_POINT('',(122.252363,-108.328528,1.585)); +#154734 = LINE('',#154735,#154736); +#154735 = CARTESIAN_POINT('',(122.247924,-108.295512,1.585)); +#154736 = VECTOR('',#154737,1.); +#154737 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#154738 = ORIENTED_EDGE('',*,*,#154739,.T.); +#154739 = EDGE_CURVE('',#154732,#154740,#154742,.T.); +#154740 = VERTEX_POINT('',#154741); +#154741 = CARTESIAN_POINT('',(122.249961,-108.524343,1.585)); +#154742 = LINE('',#154743,#154744); +#154743 = CARTESIAN_POINT('',(122.252363,-108.328528,1.585)); +#154744 = VECTOR('',#154745,1.); +#154745 = DIRECTION('',(-1.226575749656E-02,-0.999924772767,0.)); +#154746 = ORIENTED_EDGE('',*,*,#154747,.T.); +#154747 = EDGE_CURVE('',#154740,#154748,#154750,.T.); +#154748 = VERTEX_POINT('',#154749); +#154749 = CARTESIAN_POINT('',(122.239166,-108.555859,1.585)); +#154750 = LINE('',#154751,#154752); +#154751 = CARTESIAN_POINT('',(122.249961,-108.524343,1.585)); +#154752 = VECTOR('',#154753,1.); +#154753 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#154754 = ORIENTED_EDGE('',*,*,#154755,.T.); +#154755 = EDGE_CURVE('',#154748,#154756,#154758,.T.); +#154756 = VERTEX_POINT('',#154757); +#154757 = CARTESIAN_POINT('',(122.140398,-108.748024,1.585)); +#154758 = LINE('',#154759,#154760); +#154759 = CARTESIAN_POINT('',(122.239166,-108.555859,1.585)); +#154760 = VECTOR('',#154761,1.); +#154761 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#154762 = ORIENTED_EDGE('',*,*,#154763,.T.); +#154763 = EDGE_CURVE('',#154756,#154764,#154766,.T.); +#154764 = VERTEX_POINT('',#154765); +#154765 = CARTESIAN_POINT('',(122.025382,-108.861033,1.585)); +#154766 = LINE('',#154767,#154768); +#154767 = CARTESIAN_POINT('',(122.140398,-108.748024,1.585)); +#154768 = VECTOR('',#154769,1.); +#154769 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#154770 = ORIENTED_EDGE('',*,*,#154771,.T.); +#154771 = EDGE_CURVE('',#154764,#154772,#154774,.T.); +#154772 = VERTEX_POINT('',#154773); +#154773 = CARTESIAN_POINT('',(121.817522,-108.963375,1.585)); +#154774 = LINE('',#154775,#154776); +#154775 = CARTESIAN_POINT('',(122.025382,-108.861033,1.585)); +#154776 = VECTOR('',#154777,1.); +#154777 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#154778 = ORIENTED_EDGE('',*,*,#154779,.T.); +#154779 = EDGE_CURVE('',#154772,#154780,#154782,.T.); +#154780 = VERTEX_POINT('',#154781); +#154781 = CARTESIAN_POINT('',(121.784506,-108.967814,1.585)); +#154782 = LINE('',#154783,#154784); +#154783 = CARTESIAN_POINT('',(121.817522,-108.963375,1.585)); +#154784 = VECTOR('',#154785,1.); +#154785 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#154786 = ORIENTED_EDGE('',*,*,#154787,.T.); +#154787 = EDGE_CURVE('',#154780,#154788,#154790,.T.); +#154788 = VERTEX_POINT('',#154789); +#154789 = CARTESIAN_POINT('',(121.331549,-108.965412,1.585)); +#154790 = LINE('',#154791,#154792); +#154791 = CARTESIAN_POINT('',(121.784506,-108.967814,1.585)); +#154792 = VECTOR('',#154793,1.); +#154793 = DIRECTION('',(-0.999985939755,5.302857064344E-03,0.)); +#154794 = ORIENTED_EDGE('',*,*,#154795,.T.); +#154795 = EDGE_CURVE('',#154788,#154796,#154798,.T.); +#154796 = VERTEX_POINT('',#154797); +#154797 = CARTESIAN_POINT('',(121.036889,-108.865695,1.585)); +#154798 = LINE('',#154799,#154800); +#154799 = CARTESIAN_POINT('',(121.331549,-108.965412,1.585)); +#154800 = VECTOR('',#154801,1.); +#154801 = DIRECTION('',(-0.947229710679,0.320555572727,0.)); +#154802 = ORIENTED_EDGE('',*,*,#154803,.T.); +#154803 = EDGE_CURVE('',#154796,#154804,#154806,.T.); +#154804 = VERTEX_POINT('',#154805); +#154805 = CARTESIAN_POINT('',(121.114426,-108.633082,1.585)); +#154806 = CIRCLE('',#154807,0.124999465062); +#154807 = AXIS2_PLACEMENT_3D('',#154808,#154809,#154810); +#154808 = CARTESIAN_POINT('',(121.09879193058,-108.7570999105,1.585)); +#154809 = DIRECTION('',(0.,0.,-1.)); +#154810 = DIRECTION('',(-0.495225563995,-0.868764433415,-0.)); +#154811 = ORIENTED_EDGE('',*,*,#154812,.T.); +#154812 = EDGE_CURVE('',#154804,#154813,#154815,.T.); +#154813 = VERTEX_POINT('',#154814); +#154814 = CARTESIAN_POINT('',(121.376221,-108.717814,1.585)); +#154815 = LINE('',#154816,#154817); +#154816 = CARTESIAN_POINT('',(121.114426,-108.633082,1.585)); +#154817 = VECTOR('',#154818,1.); +#154818 = DIRECTION('',(0.951408731017,-0.307930879492,0.)); +#154819 = ORIENTED_EDGE('',*,*,#154820,.T.); +#154820 = EDGE_CURVE('',#154813,#154821,#154823,.T.); +#154821 = VERTEX_POINT('',#154822); +#154822 = CARTESIAN_POINT('',(121.754997,-108.717814,1.585)); +#154823 = LINE('',#154824,#154825); +#154824 = CARTESIAN_POINT('',(121.376221,-108.717814,1.585)); +#154825 = VECTOR('',#154826,1.); +#154826 = DIRECTION('',(1.,0.,0.)); +#154827 = ORIENTED_EDGE('',*,*,#154828,.T.); +#154828 = EDGE_CURVE('',#154821,#154829,#154831,.T.); +#154829 = VERTEX_POINT('',#154830); +#154830 = CARTESIAN_POINT('',(122.002363,-108.470448,1.585)); +#154831 = CIRCLE('',#154832,0.347641001424); +#154832 = AXIS2_PLACEMENT_3D('',#154833,#154834,#154835); +#154833 = CARTESIAN_POINT('',(121.66624260111,-108.3816936011,1.585)); +#154834 = DIRECTION('',(0.,0.,1.)); +#154835 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#154836 = ORIENTED_EDGE('',*,*,#154837,.T.); +#154837 = EDGE_CURVE('',#154829,#154838,#154840,.T.); +#154838 = VERTEX_POINT('',#154839); +#154839 = CARTESIAN_POINT('',(122.002363,-108.358036,1.585)); +#154840 = LINE('',#154841,#154842); +#154841 = CARTESIAN_POINT('',(122.002363,-108.470448,1.585)); +#154842 = VECTOR('',#154843,1.); +#154843 = DIRECTION('',(0.,1.,0.)); +#154844 = ORIENTED_EDGE('',*,*,#154845,.T.); +#154845 = EDGE_CURVE('',#154838,#154846,#154848,.T.); +#154846 = VERTEX_POINT('',#154847); +#154847 = CARTESIAN_POINT('',(121.938917,-108.231145,1.585)); +#154848 = LINE('',#154849,#154850); +#154849 = CARTESIAN_POINT('',(122.002363,-108.358036,1.585)); +#154850 = VECTOR('',#154851,1.); +#154851 = DIRECTION('',(-0.447216415007,0.894425781241,0.)); +#154852 = ORIENTED_EDGE('',*,*,#154853,.T.); +#154853 = EDGE_CURVE('',#154846,#154854,#154856,.T.); +#154854 = VERTEX_POINT('',#154855); +#154855 = CARTESIAN_POINT('',(121.881888,-108.174116,1.585)); +#154856 = LINE('',#154857,#154858); +#154857 = CARTESIAN_POINT('',(121.938917,-108.231145,1.585)); +#154858 = VECTOR('',#154859,1.); +#154859 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#154860 = ORIENTED_EDGE('',*,*,#154861,.T.); +#154861 = EDGE_CURVE('',#154854,#154862,#154864,.T.); +#154862 = VERTEX_POINT('',#154863); +#154863 = CARTESIAN_POINT('',(121.740877,-108.103611,1.585)); +#154864 = LINE('',#154865,#154866); +#154865 = CARTESIAN_POINT('',(121.881888,-108.174116,1.585)); +#154866 = VECTOR('',#154867,1.); +#154867 = DIRECTION('',(-0.89442845959,0.44721105831,0.)); +#154868 = ORIENTED_EDGE('',*,*,#154869,.T.); +#154869 = EDGE_CURVE('',#154862,#154870,#154872,.T.); +#154870 = VERTEX_POINT('',#154871); +#154871 = CARTESIAN_POINT('',(121.385747,-108.01176,1.585)); +#154872 = LINE('',#154873,#154874); +#154873 = CARTESIAN_POINT('',(121.740877,-108.103611,1.585)); +#154874 = VECTOR('',#154875,1.); +#154875 = DIRECTION('',(-0.968142262763,0.250400796827,0.)); +#154876 = ORIENTED_EDGE('',*,*,#154877,.T.); +#154877 = EDGE_CURVE('',#154870,#154878,#154880,.T.); +#154878 = VERTEX_POINT('',#154879); +#154879 = CARTESIAN_POINT('',(121.193581,-107.912991,1.585)); +#154880 = LINE('',#154881,#154882); +#154881 = CARTESIAN_POINT('',(121.385747,-108.01176,1.585)); +#154882 = VECTOR('',#154883,1.); +#154883 = DIRECTION('',(-0.889399267098,0.457131210578,0.)); +#154884 = ORIENTED_EDGE('',*,*,#154885,.T.); +#154885 = EDGE_CURVE('',#154878,#154886,#154888,.T.); +#154886 = VERTEX_POINT('',#154887); +#154887 = CARTESIAN_POINT('',(121.080573,-107.797974,1.585)); +#154888 = LINE('',#154889,#154890); +#154889 = CARTESIAN_POINT('',(121.193581,-107.912991,1.585)); +#154890 = VECTOR('',#154891,1.); +#154891 = DIRECTION('',(-0.700849660337,0.71330901691,0.)); +#154892 = ORIENTED_EDGE('',*,*,#154893,.T.); +#154893 = EDGE_CURVE('',#154886,#154894,#154896,.T.); +#154894 = VERTEX_POINT('',#154895); +#154895 = CARTESIAN_POINT('',(120.978231,-107.590116,1.585)); +#154896 = LINE('',#154897,#154898); +#154897 = CARTESIAN_POINT('',(121.080573,-107.797974,1.585)); +#154898 = VECTOR('',#154899,1.); +#154899 = DIRECTION('',(-0.441725393771,0.897150308754,0.)); +#154900 = ORIENTED_EDGE('',*,*,#154901,.T.); +#154901 = EDGE_CURVE('',#154894,#154902,#154904,.T.); +#154902 = VERTEX_POINT('',#154903); +#154903 = CARTESIAN_POINT('',(120.973792,-107.5571,1.585)); +#154904 = LINE('',#154905,#154906); +#154905 = CARTESIAN_POINT('',(120.978231,-107.590116,1.585)); +#154906 = VECTOR('',#154907,1.); +#154907 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#154908 = ORIENTED_EDGE('',*,*,#154909,.T.); +#154909 = EDGE_CURVE('',#154902,#154910,#154912,.T.); +#154910 = VERTEX_POINT('',#154911); +#154911 = CARTESIAN_POINT('',(120.976194,-107.361285,1.585)); +#154912 = LINE('',#154913,#154914); +#154913 = CARTESIAN_POINT('',(120.973792,-107.5571,1.585)); +#154914 = VECTOR('',#154915,1.); +#154915 = DIRECTION('',(1.226575749656E-02,0.999924772767,0.)); +#154916 = ORIENTED_EDGE('',*,*,#154917,.T.); +#154917 = EDGE_CURVE('',#154910,#154918,#154920,.T.); +#154918 = VERTEX_POINT('',#154919); +#154919 = CARTESIAN_POINT('',(120.986988,-107.32977,1.585)); +#154920 = LINE('',#154921,#154922); +#154921 = CARTESIAN_POINT('',(120.976194,-107.361285,1.585)); +#154922 = VECTOR('',#154923,1.); +#154923 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#154924 = ORIENTED_EDGE('',*,*,#154925,.T.); +#154925 = EDGE_CURVE('',#154918,#154926,#154928,.T.); +#154926 = VERTEX_POINT('',#154927); +#154927 = CARTESIAN_POINT('',(121.085756,-107.137603,1.585)); +#154928 = LINE('',#154929,#154930); +#154929 = CARTESIAN_POINT('',(120.986988,-107.32977,1.585)); +#154930 = VECTOR('',#154931,1.); +#154931 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#154932 = ORIENTED_EDGE('',*,*,#154933,.T.); +#154933 = EDGE_CURVE('',#154926,#154592,#154934,.T.); +#154934 = LINE('',#154935,#154936); +#154935 = CARTESIAN_POINT('',(121.085756,-107.137603,1.585)); +#154936 = VECTOR('',#154937,1.); +#154937 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#154938 = PLANE('',#154939); +#154939 = AXIS2_PLACEMENT_3D('',#154940,#154941,#154942); +#154940 = CARTESIAN_POINT('',(0.,0.,1.585)); +#154941 = DIRECTION('',(0.,0.,1.)); +#154942 = DIRECTION('',(1.,0.,-0.)); +#154943 = SHELL_BASED_SURFACE_MODEL('',(#154944)); +#154944 = OPEN_SHELL('',(#154945)); +#154945 = ADVANCED_FACE('',(#154946,#155182),#155233,.T.); +#154946 = FACE_BOUND('',#154947,.F.); +#154947 = EDGE_LOOP('',(#154948,#154958,#154966,#154974,#154982,#154990, + #154998,#155006,#155014,#155022,#155031,#155039,#155047,#155055, + #155063,#155071,#155079,#155088,#155096,#155104,#155112,#155120, + #155128,#155136,#155144,#155152,#155160,#155168,#155176)); +#154948 = ORIENTED_EDGE('',*,*,#154949,.T.); +#154949 = EDGE_CURVE('',#154950,#154952,#154954,.T.); +#154950 = VERTEX_POINT('',#154951); +#154951 = CARTESIAN_POINT('',(128.667384,-107.61929,1.585)); +#154952 = VERTEX_POINT('',#154953); +#154953 = CARTESIAN_POINT('',(128.865776,-107.522253,1.585)); +#154954 = LINE('',#154955,#154956); +#154955 = CARTESIAN_POINT('',(128.667384,-107.61929,1.585)); +#154956 = VECTOR('',#154957,1.); +#154957 = DIRECTION('',(0.898303312265,0.439375874593,0.)); +#154958 = ORIENTED_EDGE('',*,*,#154959,.T.); +#154959 = EDGE_CURVE('',#154952,#154960,#154962,.T.); +#154960 = VERTEX_POINT('',#154961); +#154961 = CARTESIAN_POINT('',(128.898792,-107.517814,1.585)); +#154962 = LINE('',#154963,#154964); +#154963 = CARTESIAN_POINT('',(128.865776,-107.522253,1.585)); +#154964 = VECTOR('',#154965,1.); +#154965 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#154966 = ORIENTED_EDGE('',*,*,#154967,.T.); +#154967 = EDGE_CURVE('',#154960,#154968,#154970,.T.); +#154968 = VERTEX_POINT('',#154969); +#154969 = CARTESIAN_POINT('',(129.266035,-107.520216,1.585)); +#154970 = LINE('',#154971,#154972); +#154971 = CARTESIAN_POINT('',(128.898792,-107.517814,1.585)); +#154972 = VECTOR('',#154973,1.); +#154973 = DIRECTION('',(0.999978610776,-6.540488513295E-03,0.)); +#154974 = ORIENTED_EDGE('',*,*,#154975,.T.); +#154975 = EDGE_CURVE('',#154968,#154976,#154978,.T.); +#154976 = VERTEX_POINT('',#154977); +#154977 = CARTESIAN_POINT('',(129.297551,-107.531011,1.585)); +#154978 = LINE('',#154979,#154980); +#154979 = CARTESIAN_POINT('',(129.266035,-107.520216,1.585)); +#154980 = VECTOR('',#154981,1.); +#154981 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#154982 = ORIENTED_EDGE('',*,*,#154983,.T.); +#154983 = EDGE_CURVE('',#154976,#154984,#154986,.T.); +#154984 = VERTEX_POINT('',#154985); +#154985 = CARTESIAN_POINT('',(129.489716,-107.629779,1.585)); +#154986 = LINE('',#154987,#154988); +#154987 = CARTESIAN_POINT('',(129.297551,-107.531011,1.585)); +#154988 = VECTOR('',#154989,1.); +#154989 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#154990 = ORIENTED_EDGE('',*,*,#154991,.T.); +#154991 = EDGE_CURVE('',#154984,#154992,#154994,.T.); +#154992 = VERTEX_POINT('',#154993); +#154993 = CARTESIAN_POINT('',(129.522313,-107.668549,1.585)); +#154994 = LINE('',#154995,#154996); +#154995 = CARTESIAN_POINT('',(129.489716,-107.629779,1.585)); +#154996 = VECTOR('',#154997,1.); +#154997 = DIRECTION('',(0.643541585038,-0.765411149858,0.)); +#154998 = ORIENTED_EDGE('',*,*,#154999,.T.); +#154999 = EDGE_CURVE('',#154992,#155000,#155002,.T.); +#155000 = VERTEX_POINT('',#155001); +#155001 = CARTESIAN_POINT('',(129.619353,-107.866941,1.585)); +#155002 = LINE('',#155003,#155004); +#155003 = CARTESIAN_POINT('',(129.522313,-107.668549,1.585)); +#155004 = VECTOR('',#155005,1.); +#155005 = DIRECTION('',(0.439386835897,-0.898297950816,0.)); +#155006 = ORIENTED_EDGE('',*,*,#155007,.T.); +#155007 = EDGE_CURVE('',#155000,#155008,#155010,.T.); +#155008 = VERTEX_POINT('',#155009); +#155009 = CARTESIAN_POINT('',(129.623792,-107.899957,1.585)); +#155010 = LINE('',#155011,#155012); +#155011 = CARTESIAN_POINT('',(129.619353,-107.866941,1.585)); +#155012 = VECTOR('',#155013,1.); +#155013 = DIRECTION('',(0.133250982623,-0.991082325355,0.)); +#155014 = ORIENTED_EDGE('',*,*,#155015,.T.); +#155015 = EDGE_CURVE('',#155008,#155016,#155018,.T.); +#155016 = VERTEX_POINT('',#155017); +#155017 = CARTESIAN_POINT('',(129.62139,-108.095771,1.585)); +#155018 = LINE('',#155019,#155020); +#155019 = CARTESIAN_POINT('',(129.623792,-107.899957,1.585)); +#155020 = VECTOR('',#155021,1.); +#155021 = DIRECTION('',(-1.226582012705E-02,-0.999924771999,0.)); +#155022 = ORIENTED_EDGE('',*,*,#155023,.T.); +#155023 = EDGE_CURVE('',#155016,#155024,#155026,.T.); +#155024 = VERTEX_POINT('',#155025); +#155025 = CARTESIAN_POINT('',(129.523307,-108.193958,1.585)); +#155026 = CIRCLE('',#155027,0.124999730291); +#155027 = AXIS2_PLACEMENT_3D('',#155028,#155029,#155030); +#155028 = CARTESIAN_POINT('',(129.4987918965,-108.0713858079,1.585)); +#155029 = DIRECTION('',(0.,0.,-1.)); +#155030 = DIRECTION('',(0.980786944144,-0.195081957639,0.)); +#155031 = ORIENTED_EDGE('',*,*,#155032,.T.); +#155032 = EDGE_CURVE('',#155024,#155033,#155035,.T.); +#155033 = VERTEX_POINT('',#155034); +#155034 = CARTESIAN_POINT('',(128.766649,-108.345289,1.585)); +#155035 = LINE('',#155036,#155037); +#155036 = CARTESIAN_POINT('',(129.523307,-108.193958,1.585)); +#155037 = VECTOR('',#155038,1.); +#155038 = DIRECTION('',(-0.980580825222,-0.196115387482,0.)); +#155039 = ORIENTED_EDGE('',*,*,#155040,.T.); +#155040 = EDGE_CURVE('',#155033,#155041,#155043,.T.); +#155041 = VERTEX_POINT('',#155042); +#155042 = CARTESIAN_POINT('',(128.766649,-108.556162,1.585)); +#155043 = LINE('',#155044,#155045); +#155044 = CARTESIAN_POINT('',(128.766649,-108.345289,1.585)); +#155045 = VECTOR('',#155046,1.); +#155046 = DIRECTION('',(0.,-1.,0.)); +#155047 = ORIENTED_EDGE('',*,*,#155048,.T.); +#155048 = EDGE_CURVE('',#155041,#155049,#155051,.T.); +#155049 = VERTEX_POINT('',#155050); +#155050 = CARTESIAN_POINT('',(128.820532,-108.66393,1.585)); +#155051 = LINE('',#155052,#155053); +#155052 = CARTESIAN_POINT('',(128.766649,-108.556162,1.585)); +#155053 = VECTOR('',#155054,1.); +#155054 = DIRECTION('',(0.447206955813,-0.894430510812,0.)); +#155055 = ORIENTED_EDGE('',*,*,#155056,.T.); +#155056 = EDGE_CURVE('',#155049,#155057,#155059,.T.); +#155057 = VERTEX_POINT('',#155058); +#155058 = CARTESIAN_POINT('',(128.928301,-108.717814,1.585)); +#155059 = LINE('',#155060,#155061); +#155060 = CARTESIAN_POINT('',(128.820532,-108.66393,1.585)); +#155061 = VECTOR('',#155062,1.); +#155062 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#155063 = ORIENTED_EDGE('',*,*,#155064,.T.); +#155064 = EDGE_CURVE('',#155057,#155065,#155067,.T.); +#155065 = VERTEX_POINT('',#155066); +#155066 = CARTESIAN_POINT('',(129.212141,-108.717814,1.585)); +#155067 = LINE('',#155068,#155069); +#155068 = CARTESIAN_POINT('',(128.928301,-108.717814,1.585)); +#155069 = VECTOR('',#155070,1.); +#155070 = DIRECTION('',(1.,0.,0.)); +#155071 = ORIENTED_EDGE('',*,*,#155072,.T.); +#155072 = EDGE_CURVE('',#155065,#155073,#155075,.T.); +#155073 = VERTEX_POINT('',#155074); +#155074 = CARTESIAN_POINT('',(129.380061,-108.636539,1.585)); +#155075 = LINE('',#155076,#155077); +#155076 = CARTESIAN_POINT('',(129.212141,-108.717814,1.585)); +#155077 = VECTOR('',#155078,1.); +#155078 = DIRECTION('',(0.90011009407,0.435662505333,0.)); +#155079 = ORIENTED_EDGE('',*,*,#155080,.T.); +#155080 = EDGE_CURVE('',#155073,#155081,#155083,.T.); +#155081 = VERTEX_POINT('',#155082); +#155082 = CARTESIAN_POINT('',(129.489716,-108.855849,1.585)); +#155083 = CIRCLE('',#155084,0.124999889885); +#155084 = AXIS2_PLACEMENT_3D('',#155085,#155086,#155087); +#155085 = CARTESIAN_POINT('',(129.41307660067,-108.7570999496,1.585)); +#155086 = DIRECTION('',(0.,0.,-1.)); +#155087 = DIRECTION('',(-0.264125038109,0.964488446921,-0.)); +#155088 = ORIENTED_EDGE('',*,*,#155089,.T.); +#155089 = EDGE_CURVE('',#155081,#155090,#155092,.T.); +#155090 = VERTEX_POINT('',#155091); +#155091 = CARTESIAN_POINT('',(129.274665,-108.963375,1.585)); +#155092 = LINE('',#155093,#155094); +#155093 = CARTESIAN_POINT('',(129.489716,-108.855849,1.585)); +#155094 = VECTOR('',#155095,1.); +#155095 = DIRECTION('',(-0.894426359171,-0.447215259154,0.)); +#155096 = ORIENTED_EDGE('',*,*,#155097,.T.); +#155097 = EDGE_CURVE('',#155090,#155098,#155100,.T.); +#155098 = VERTEX_POINT('',#155099); +#155099 = CARTESIAN_POINT('',(129.241649,-108.967814,1.585)); +#155100 = LINE('',#155101,#155102); +#155101 = CARTESIAN_POINT('',(129.274665,-108.963375,1.585)); +#155102 = VECTOR('',#155103,1.); +#155103 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#155104 = ORIENTED_EDGE('',*,*,#155105,.T.); +#155105 = EDGE_CURVE('',#155098,#155106,#155108,.T.); +#155106 = VERTEX_POINT('',#155107); +#155107 = CARTESIAN_POINT('',(128.874406,-108.965412,1.585)); +#155108 = LINE('',#155109,#155110); +#155109 = CARTESIAN_POINT('',(129.241649,-108.967814,1.585)); +#155110 = VECTOR('',#155111,1.); +#155111 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#155112 = ORIENTED_EDGE('',*,*,#155113,.T.); +#155113 = EDGE_CURVE('',#155106,#155114,#155116,.T.); +#155114 = VERTEX_POINT('',#155115); +#155115 = CARTESIAN_POINT('',(128.84289,-108.954617,1.585)); +#155116 = LINE('',#155117,#155118); +#155117 = CARTESIAN_POINT('',(128.874406,-108.965412,1.585)); +#155118 = VECTOR('',#155119,1.); +#155119 = DIRECTION('',(-0.946042469829,0.324042659659,0.)); +#155120 = ORIENTED_EDGE('',*,*,#155121,.T.); +#155121 = EDGE_CURVE('',#155114,#155122,#155124,.T.); +#155122 = VERTEX_POINT('',#155123); +#155123 = CARTESIAN_POINT('',(128.650724,-108.855849,1.585)); +#155124 = LINE('',#155125,#155126); +#155125 = CARTESIAN_POINT('',(128.84289,-108.954617,1.585)); +#155126 = VECTOR('',#155127,1.); +#155127 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#155128 = ORIENTED_EDGE('',*,*,#155129,.T.); +#155129 = EDGE_CURVE('',#155122,#155130,#155132,.T.); +#155130 = VERTEX_POINT('',#155131); +#155131 = CARTESIAN_POINT('',(128.618126,-108.81708,1.585)); +#155132 = LINE('',#155133,#155134); +#155133 = CARTESIAN_POINT('',(128.650724,-108.855849,1.585)); +#155134 = VECTOR('',#155135,1.); +#155135 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#155136 = ORIENTED_EDGE('',*,*,#155137,.T.); +#155137 = EDGE_CURVE('',#155130,#155138,#155140,.T.); +#155138 = VERTEX_POINT('',#155139); +#155139 = CARTESIAN_POINT('',(128.521088,-108.618687,1.585)); +#155140 = LINE('',#155141,#155142); +#155141 = CARTESIAN_POINT('',(128.618126,-108.81708,1.585)); +#155142 = VECTOR('',#155143,1.); +#155143 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#155144 = ORIENTED_EDGE('',*,*,#155145,.T.); +#155145 = EDGE_CURVE('',#155138,#155146,#155148,.T.); +#155146 = VERTEX_POINT('',#155147); +#155147 = CARTESIAN_POINT('',(128.516649,-108.585671,1.585)); +#155148 = LINE('',#155149,#155150); +#155149 = CARTESIAN_POINT('',(128.521088,-108.618687,1.585)); +#155150 = VECTOR('',#155151,1.); +#155151 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#155152 = ORIENTED_EDGE('',*,*,#155153,.T.); +#155153 = EDGE_CURVE('',#155146,#155154,#155156,.T.); +#155154 = VERTEX_POINT('',#155155); +#155155 = CARTESIAN_POINT('',(128.519051,-107.875571,1.585)); +#155156 = LINE('',#155157,#155158); +#155157 = CARTESIAN_POINT('',(128.516649,-108.585671,1.585)); +#155158 = VECTOR('',#155159,1.); +#155159 = DIRECTION('',(3.382602813837E-03,0.999994278983,0.)); +#155160 = ORIENTED_EDGE('',*,*,#155161,.T.); +#155161 = EDGE_CURVE('',#155154,#155162,#155164,.T.); +#155162 = VERTEX_POINT('',#155163); +#155163 = CARTESIAN_POINT('',(128.529845,-107.844056,1.585)); +#155164 = LINE('',#155165,#155166); +#155165 = CARTESIAN_POINT('',(128.519051,-107.875571,1.585)); +#155166 = VECTOR('',#155167,1.); +#155167 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#155168 = ORIENTED_EDGE('',*,*,#155169,.T.); +#155169 = EDGE_CURVE('',#155162,#155170,#155172,.T.); +#155170 = VERTEX_POINT('',#155171); +#155171 = CARTESIAN_POINT('',(128.628613,-107.651889,1.585)); +#155172 = LINE('',#155173,#155174); +#155173 = CARTESIAN_POINT('',(128.529845,-107.844056,1.585)); +#155174 = VECTOR('',#155175,1.); +#155175 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#155176 = ORIENTED_EDGE('',*,*,#155177,.T.); +#155177 = EDGE_CURVE('',#155170,#154950,#155178,.T.); +#155178 = LINE('',#155179,#155180); +#155179 = CARTESIAN_POINT('',(128.628613,-107.651889,1.585)); +#155180 = VECTOR('',#155181,1.); +#155181 = DIRECTION('',(0.765399877272,0.643554992112,0.)); +#155182 = FACE_BOUND('',#155183,.F.); +#155183 = EDGE_LOOP('',(#155184,#155195,#155203,#155211,#155219,#155227) + ); +#155184 = ORIENTED_EDGE('',*,*,#155185,.T.); +#155185 = EDGE_CURVE('',#155186,#155188,#155190,.T.); +#155186 = VERTEX_POINT('',#155187); +#155187 = CARTESIAN_POINT('',(129.319907,-107.821697,1.585)); +#155188 = VERTEX_POINT('',#155189); +#155189 = CARTESIAN_POINT('',(128.820532,-107.821698,1.585)); +#155190 = CIRCLE('',#155191,0.441959003379); +#155191 = AXIS2_PLACEMENT_3D('',#155192,#155193,#155194); +#155192 = CARTESIAN_POINT('',(129.07022023025,-108.1863670943,1.585)); +#155193 = DIRECTION('',(0.,0.,1.)); +#155194 = DIRECTION('',(0.564954594972,0.825121994386,-0.)); +#155195 = ORIENTED_EDGE('',*,*,#155196,.T.); +#155196 = EDGE_CURVE('',#155188,#155197,#155199,.T.); +#155197 = VERTEX_POINT('',#155198); +#155198 = CARTESIAN_POINT('',(128.766649,-107.929465,1.585)); +#155199 = LINE('',#155200,#155201); +#155200 = CARTESIAN_POINT('',(128.820532,-107.821698,1.585)); +#155201 = VECTOR('',#155202,1.); +#155202 = DIRECTION('',(-0.447210275635,-0.894428850925,0.)); +#155203 = ORIENTED_EDGE('',*,*,#155204,.T.); +#155204 = EDGE_CURVE('',#155197,#155205,#155207,.T.); +#155205 = VERTEX_POINT('',#155206); +#155206 = CARTESIAN_POINT('',(128.766649,-108.090337,1.585)); +#155207 = LINE('',#155208,#155209); +#155208 = CARTESIAN_POINT('',(128.766649,-107.929465,1.585)); +#155209 = VECTOR('',#155210,1.); +#155210 = DIRECTION('',(0.,-1.,0.)); +#155211 = ORIENTED_EDGE('',*,*,#155212,.T.); +#155212 = EDGE_CURVE('',#155205,#155213,#155215,.T.); +#155213 = VERTEX_POINT('',#155214); +#155214 = CARTESIAN_POINT('',(129.373792,-107.968909,1.585)); +#155215 = LINE('',#155216,#155217); +#155216 = CARTESIAN_POINT('',(128.766649,-108.090337,1.585)); +#155217 = VECTOR('',#155218,1.); +#155218 = DIRECTION('',(0.980580862045,0.196115203365,0.)); +#155219 = ORIENTED_EDGE('',*,*,#155220,.T.); +#155220 = EDGE_CURVE('',#155213,#155221,#155223,.T.); +#155221 = VERTEX_POINT('',#155222); +#155222 = CARTESIAN_POINT('',(129.373792,-107.929465,1.585)); +#155223 = LINE('',#155224,#155225); +#155224 = CARTESIAN_POINT('',(129.373792,-107.968909,1.585)); +#155225 = VECTOR('',#155226,1.); +#155226 = DIRECTION('',(0.,1.,0.)); +#155227 = ORIENTED_EDGE('',*,*,#155228,.T.); +#155228 = EDGE_CURVE('',#155221,#155186,#155229,.T.); +#155229 = LINE('',#155230,#155231); +#155230 = CARTESIAN_POINT('',(129.373792,-107.929465,1.585)); +#155231 = VECTOR('',#155232,1.); +#155232 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#155233 = PLANE('',#155234); +#155234 = AXIS2_PLACEMENT_3D('',#155235,#155236,#155237); +#155235 = CARTESIAN_POINT('',(0.,0.,1.585)); +#155236 = DIRECTION('',(0.,0.,1.)); +#155237 = DIRECTION('',(1.,0.,-0.)); +#155238 = SHELL_BASED_SURFACE_MODEL('',(#155239)); +#155239 = OPEN_SHELL('',(#155240)); +#155240 = ADVANCED_FACE('',(#155241),#155583,.T.); +#155241 = FACE_BOUND('',#155242,.F.); +#155242 = EDGE_LOOP('',(#155243,#155253,#155261,#155269,#155277,#155285, + #155294,#155302,#155310,#155318,#155327,#155335,#155343,#155351, + #155359,#155367,#155375,#155383,#155391,#155399,#155407,#155415, + #155423,#155431,#155439,#155447,#155455,#155464,#155472,#155480, + #155488,#155497,#155505,#155513,#155521,#155529,#155537,#155545, + #155553,#155561,#155569,#155577)); +#155243 = ORIENTED_EDGE('',*,*,#155244,.T.); +#155244 = EDGE_CURVE('',#155245,#155247,#155249,.T.); +#155245 = VERTEX_POINT('',#155246); +#155246 = CARTESIAN_POINT('',(131.58167,-107.61929,1.585)); +#155247 = VERTEX_POINT('',#155248); +#155248 = CARTESIAN_POINT('',(131.780062,-107.522253,1.585)); +#155249 = LINE('',#155250,#155251); +#155250 = CARTESIAN_POINT('',(131.58167,-107.61929,1.585)); +#155251 = VECTOR('',#155252,1.); +#155252 = DIRECTION('',(0.898303312265,0.439375874593,0.)); +#155253 = ORIENTED_EDGE('',*,*,#155254,.T.); +#155254 = EDGE_CURVE('',#155247,#155255,#155257,.T.); +#155255 = VERTEX_POINT('',#155256); +#155256 = CARTESIAN_POINT('',(131.813078,-107.517814,1.585)); +#155257 = LINE('',#155258,#155259); +#155258 = CARTESIAN_POINT('',(131.780062,-107.522253,1.585)); +#155259 = VECTOR('',#155260,1.); +#155260 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#155261 = ORIENTED_EDGE('',*,*,#155262,.T.); +#155262 = EDGE_CURVE('',#155255,#155263,#155265,.T.); +#155263 = VERTEX_POINT('',#155264); +#155264 = CARTESIAN_POINT('',(132.094606,-107.520216,1.585)); +#155265 = LINE('',#155266,#155267); +#155266 = CARTESIAN_POINT('',(131.813078,-107.517814,1.585)); +#155267 = VECTOR('',#155268,1.); +#155268 = DIRECTION('',(0.999963604381,-8.531700497736E-03,0.)); +#155269 = ORIENTED_EDGE('',*,*,#155270,.T.); +#155270 = EDGE_CURVE('',#155263,#155271,#155273,.T.); +#155271 = VERTEX_POINT('',#155272); +#155272 = CARTESIAN_POINT('',(132.126121,-107.53101,1.585)); +#155273 = LINE('',#155274,#155275); +#155274 = CARTESIAN_POINT('',(132.094606,-107.520216,1.585)); +#155275 = VECTOR('',#155276,1.); +#155276 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#155277 = ORIENTED_EDGE('',*,*,#155278,.T.); +#155278 = EDGE_CURVE('',#155271,#155279,#155281,.T.); +#155279 = VERTEX_POINT('',#155280); +#155280 = CARTESIAN_POINT('',(132.318288,-107.629778,1.585)); +#155281 = LINE('',#155282,#155283); +#155282 = CARTESIAN_POINT('',(132.126121,-107.53101,1.585)); +#155283 = VECTOR('',#155284,1.); +#155284 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#155285 = ORIENTED_EDGE('',*,*,#155286,.T.); +#155286 = EDGE_CURVE('',#155279,#155287,#155289,.T.); +#155287 = VERTEX_POINT('',#155288); +#155288 = CARTESIAN_POINT('',(132.208633,-107.849089,1.585)); +#155289 = CIRCLE('',#155290,0.125000271896); +#155290 = AXIS2_PLACEMENT_3D('',#155291,#155292,#155293); +#155291 = CARTESIAN_POINT('',(132.24164884032,-107.7285277198,1.585)); +#155292 = DIRECTION('',(0.,0.,-1.)); +#155293 = DIRECTION('',(0.613111943766,0.789996040757,0.)); +#155294 = ORIENTED_EDGE('',*,*,#155295,.T.); +#155295 = EDGE_CURVE('',#155287,#155296,#155298,.T.); +#155296 = VERTEX_POINT('',#155297); +#155297 = CARTESIAN_POINT('',(132.040711,-107.767814,1.585)); +#155298 = LINE('',#155299,#155300); +#155299 = CARTESIAN_POINT('',(132.208633,-107.849089,1.585)); +#155300 = VECTOR('',#155301,1.); +#155301 = DIRECTION('',(-0.900112128849,0.435658301308,0.)); +#155302 = ORIENTED_EDGE('',*,*,#155303,.T.); +#155303 = EDGE_CURVE('',#155296,#155304,#155306,.T.); +#155304 = VERTEX_POINT('',#155305); +#155305 = CARTESIAN_POINT('',(131.842587,-107.767814,1.585)); +#155306 = LINE('',#155307,#155308); +#155307 = CARTESIAN_POINT('',(132.040711,-107.767814,1.585)); +#155308 = VECTOR('',#155309,1.); +#155309 = DIRECTION('',(-1.,0.,0.)); +#155310 = ORIENTED_EDGE('',*,*,#155311,.T.); +#155311 = EDGE_CURVE('',#155304,#155312,#155314,.T.); +#155312 = VERTEX_POINT('',#155313); +#155313 = CARTESIAN_POINT('',(131.734818,-107.821698,1.585)); +#155314 = LINE('',#155315,#155316); +#155315 = CARTESIAN_POINT('',(131.842587,-107.767814,1.585)); +#155316 = VECTOR('',#155317,1.); +#155317 = DIRECTION('',(-0.894428850894,-0.447210275697,0.)); +#155318 = ORIENTED_EDGE('',*,*,#155319,.T.); +#155319 = EDGE_CURVE('',#155312,#155320,#155322,.T.); +#155320 = VERTEX_POINT('',#155321); +#155321 = CARTESIAN_POINT('',(131.734818,-108.06393,1.585)); +#155322 = CIRCLE('',#155323,0.161958812155); +#155323 = AXIS2_PLACEMENT_3D('',#155324,#155325,#155326); +#155324 = CARTESIAN_POINT('',(131.84234274775,-107.942814,1.585)); +#155325 = DIRECTION('',(0.,0.,1.)); +#155326 = DIRECTION('',(-0.663901805151,0.74781975978,0.)); +#155327 = ORIENTED_EDGE('',*,*,#155328,.T.); +#155328 = EDGE_CURVE('',#155320,#155329,#155331,.T.); +#155329 = VERTEX_POINT('',#155330); +#155330 = CARTESIAN_POINT('',(131.842587,-108.117814,1.585)); +#155331 = LINE('',#155332,#155333); +#155332 = CARTESIAN_POINT('',(131.734818,-108.06393,1.585)); +#155333 = VECTOR('',#155334,1.); +#155334 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#155335 = ORIENTED_EDGE('',*,*,#155336,.T.); +#155336 = EDGE_CURVE('',#155329,#155337,#155339,.T.); +#155337 = VERTEX_POINT('',#155338); +#155338 = CARTESIAN_POINT('',(132.094606,-108.120216,1.585)); +#155339 = LINE('',#155340,#155341); +#155340 = CARTESIAN_POINT('',(131.842587,-108.117814,1.585)); +#155341 = VECTOR('',#155342,1.); +#155342 = DIRECTION('',(0.999954582852,-9.530594550471E-03,0.)); +#155343 = ORIENTED_EDGE('',*,*,#155344,.T.); +#155344 = EDGE_CURVE('',#155337,#155345,#155347,.T.); +#155345 = VERTEX_POINT('',#155346); +#155346 = CARTESIAN_POINT('',(132.126121,-108.13101,1.585)); +#155347 = LINE('',#155348,#155349); +#155348 = CARTESIAN_POINT('',(132.094606,-108.120216,1.585)); +#155349 = VECTOR('',#155350,1.); +#155350 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#155351 = ORIENTED_EDGE('',*,*,#155352,.T.); +#155352 = EDGE_CURVE('',#155345,#155353,#155355,.T.); +#155353 = VERTEX_POINT('',#155354); +#155354 = CARTESIAN_POINT('',(132.318288,-108.229778,1.585)); +#155355 = LINE('',#155356,#155357); +#155356 = CARTESIAN_POINT('',(132.126121,-108.13101,1.585)); +#155357 = VECTOR('',#155358,1.); +#155358 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#155359 = ORIENTED_EDGE('',*,*,#155360,.T.); +#155360 = EDGE_CURVE('',#155353,#155361,#155363,.T.); +#155361 = VERTEX_POINT('',#155362); +#155362 = CARTESIAN_POINT('',(132.350886,-108.268549,1.585)); +#155363 = LINE('',#155364,#155365); +#155364 = CARTESIAN_POINT('',(132.318288,-108.229778,1.585)); +#155365 = VECTOR('',#155366,1.); +#155366 = DIRECTION('',(0.643543426558,-0.765409601543,0.)); +#155367 = ORIENTED_EDGE('',*,*,#155368,.T.); +#155368 = EDGE_CURVE('',#155361,#155369,#155371,.T.); +#155369 = VERTEX_POINT('',#155370); +#155370 = CARTESIAN_POINT('',(132.447924,-108.466941,1.585)); +#155371 = LINE('',#155372,#155373); +#155372 = CARTESIAN_POINT('',(132.350886,-108.268549,1.585)); +#155373 = VECTOR('',#155374,1.); +#155374 = DIRECTION('',(0.439379528383,-0.898301525123,0.)); +#155375 = ORIENTED_EDGE('',*,*,#155376,.T.); +#155376 = EDGE_CURVE('',#155369,#155377,#155379,.T.); +#155377 = VERTEX_POINT('',#155378); +#155378 = CARTESIAN_POINT('',(132.452363,-108.499957,1.585)); +#155379 = LINE('',#155380,#155381); +#155380 = CARTESIAN_POINT('',(132.447924,-108.466941,1.585)); +#155381 = VECTOR('',#155382,1.); +#155382 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#155383 = ORIENTED_EDGE('',*,*,#155384,.T.); +#155384 = EDGE_CURVE('',#155377,#155385,#155387,.T.); +#155385 = VERTEX_POINT('',#155386); +#155386 = CARTESIAN_POINT('',(132.449961,-108.610057,1.585)); +#155387 = LINE('',#155388,#155389); +#155388 = CARTESIAN_POINT('',(132.452363,-108.499957,1.585)); +#155389 = VECTOR('',#155390,1.); +#155390 = DIRECTION('',(-2.181134037059E-02,-0.999762104418,0.)); +#155391 = ORIENTED_EDGE('',*,*,#155392,.T.); +#155392 = EDGE_CURVE('',#155385,#155393,#155395,.T.); +#155393 = VERTEX_POINT('',#155394); +#155394 = CARTESIAN_POINT('',(132.439166,-108.641573,1.585)); +#155395 = LINE('',#155396,#155397); +#155396 = CARTESIAN_POINT('',(132.449961,-108.610057,1.585)); +#155397 = VECTOR('',#155398,1.); +#155398 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#155399 = ORIENTED_EDGE('',*,*,#155400,.T.); +#155400 = EDGE_CURVE('',#155393,#155401,#155403,.T.); +#155401 = VERTEX_POINT('',#155402); +#155402 = CARTESIAN_POINT('',(132.340398,-108.833739,1.585)); +#155403 = LINE('',#155404,#155405); +#155404 = CARTESIAN_POINT('',(132.439166,-108.641573,1.585)); +#155405 = VECTOR('',#155406,1.); +#155406 = DIRECTION('',(-0.457127549449,-0.889401148827,0.)); +#155407 = ORIENTED_EDGE('',*,*,#155408,.T.); +#155408 = EDGE_CURVE('',#155401,#155409,#155411,.T.); +#155409 = VERTEX_POINT('',#155410); +#155410 = CARTESIAN_POINT('',(132.301629,-108.866336,1.585)); +#155411 = LINE('',#155412,#155413); +#155412 = CARTESIAN_POINT('',(132.340398,-108.833739,1.585)); +#155413 = VECTOR('',#155414,1.); +#155414 = DIRECTION('',(-0.765402973459,-0.643551309702,0.)); +#155415 = ORIENTED_EDGE('',*,*,#155416,.T.); +#155416 = EDGE_CURVE('',#155409,#155417,#155419,.T.); +#155417 = VERTEX_POINT('',#155418); +#155418 = CARTESIAN_POINT('',(132.103236,-108.963375,1.585)); +#155419 = LINE('',#155420,#155421); +#155420 = CARTESIAN_POINT('',(132.301629,-108.866336,1.585)); +#155421 = VECTOR('',#155422,1.); +#155422 = DIRECTION('',(-0.898300612114,-0.439381395004,0.)); +#155423 = ORIENTED_EDGE('',*,*,#155424,.T.); +#155424 = EDGE_CURVE('',#155417,#155425,#155427,.T.); +#155425 = VERTEX_POINT('',#155426); +#155426 = CARTESIAN_POINT('',(132.07022,-108.967814,1.585)); +#155427 = LINE('',#155428,#155429); +#155428 = CARTESIAN_POINT('',(132.103236,-108.963375,1.585)); +#155429 = VECTOR('',#155430,1.); +#155430 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#155431 = ORIENTED_EDGE('',*,*,#155432,.T.); +#155432 = EDGE_CURVE('',#155425,#155433,#155435,.T.); +#155433 = VERTEX_POINT('',#155434); +#155434 = CARTESIAN_POINT('',(131.702977,-108.965412,1.585)); +#155435 = LINE('',#155436,#155437); +#155436 = CARTESIAN_POINT('',(132.07022,-108.967814,1.585)); +#155437 = VECTOR('',#155438,1.); +#155438 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#155439 = ORIENTED_EDGE('',*,*,#155440,.T.); +#155440 = EDGE_CURVE('',#155433,#155441,#155443,.T.); +#155441 = VERTEX_POINT('',#155442); +#155442 = CARTESIAN_POINT('',(131.671461,-108.954617,1.585)); +#155443 = LINE('',#155444,#155445); +#155444 = CARTESIAN_POINT('',(131.702977,-108.965412,1.585)); +#155445 = VECTOR('',#155446,1.); +#155446 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#155447 = ORIENTED_EDGE('',*,*,#155448,.T.); +#155448 = EDGE_CURVE('',#155441,#155449,#155451,.T.); +#155449 = VERTEX_POINT('',#155450); +#155450 = CARTESIAN_POINT('',(131.479296,-108.855849,1.585)); +#155451 = LINE('',#155452,#155453); +#155452 = CARTESIAN_POINT('',(131.671461,-108.954617,1.585)); +#155453 = VECTOR('',#155454,1.); +#155454 = DIRECTION('',(-0.889400181667,0.457129431181,0.)); +#155455 = ORIENTED_EDGE('',*,*,#155456,.T.); +#155456 = EDGE_CURVE('',#155449,#155457,#155459,.T.); +#155457 = VERTEX_POINT('',#155458); +#155458 = CARTESIAN_POINT('',(131.588951,-108.636539,1.585)); +#155459 = CIRCLE('',#155460,0.124999759312); +#155460 = AXIS2_PLACEMENT_3D('',#155461,#155462,#155463); +#155461 = CARTESIAN_POINT('',(131.55593480068,-108.7570996503,1.585)); +#155462 = DIRECTION('',(0.,0.,-1.)); +#155463 = DIRECTION('',(-0.61311158599,-0.789996318425,-0.)); +#155464 = ORIENTED_EDGE('',*,*,#155465,.T.); +#155465 = EDGE_CURVE('',#155457,#155466,#155468,.T.); +#155466 = VERTEX_POINT('',#155467); +#155467 = CARTESIAN_POINT('',(131.756872,-108.717814,1.585)); +#155468 = LINE('',#155469,#155470); +#155469 = CARTESIAN_POINT('',(131.588951,-108.636539,1.585)); +#155470 = VECTOR('',#155471,1.); +#155471 = DIRECTION('',(0.900111111467,-0.435660403312,0.)); +#155472 = ORIENTED_EDGE('',*,*,#155473,.T.); +#155473 = EDGE_CURVE('',#155466,#155474,#155476,.T.); +#155474 = VERTEX_POINT('',#155475); +#155475 = CARTESIAN_POINT('',(132.040711,-108.717814,1.585)); +#155476 = LINE('',#155477,#155478); +#155477 = CARTESIAN_POINT('',(131.756872,-108.717814,1.585)); +#155478 = VECTOR('',#155479,1.); +#155479 = DIRECTION('',(1.,0.,0.)); +#155480 = ORIENTED_EDGE('',*,*,#155481,.T.); +#155481 = EDGE_CURVE('',#155474,#155482,#155484,.T.); +#155482 = VERTEX_POINT('',#155483); +#155483 = CARTESIAN_POINT('',(132.148479,-108.66393,1.585)); +#155484 = LINE('',#155485,#155486); +#155485 = CARTESIAN_POINT('',(132.040711,-108.717814,1.585)); +#155486 = VECTOR('',#155487,1.); +#155487 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#155488 = ORIENTED_EDGE('',*,*,#155489,.T.); +#155489 = EDGE_CURVE('',#155482,#155490,#155492,.T.); +#155490 = VERTEX_POINT('',#155491); +#155491 = CARTESIAN_POINT('',(132.148479,-108.421697,1.585)); +#155492 = CIRCLE('',#155493,0.161958025739); +#155493 = AXIS2_PLACEMENT_3D('',#155494,#155495,#155496); +#155494 = CARTESIAN_POINT('',(132.040956,-108.5428135,1.585)); +#155495 = DIRECTION('',(0.,-0.,1.)); +#155496 = DIRECTION('',(0.66389423747,-0.747826478172,-0.)); +#155497 = ORIENTED_EDGE('',*,*,#155498,.T.); +#155498 = EDGE_CURVE('',#155490,#155499,#155501,.T.); +#155499 = VERTEX_POINT('',#155500); +#155500 = CARTESIAN_POINT('',(132.040711,-108.367814,1.585)); +#155501 = LINE('',#155502,#155503); +#155502 = CARTESIAN_POINT('',(132.148479,-108.421697,1.585)); +#155503 = VECTOR('',#155504,1.); +#155504 = DIRECTION('',(-0.894430510812,0.447206955813,0.)); +#155505 = ORIENTED_EDGE('',*,*,#155506,.T.); +#155506 = EDGE_CURVE('',#155499,#155507,#155509,.T.); +#155507 = VERTEX_POINT('',#155508); +#155508 = CARTESIAN_POINT('',(131.788692,-108.365412,1.585)); +#155509 = LINE('',#155510,#155511); +#155510 = CARTESIAN_POINT('',(132.040711,-108.367814,1.585)); +#155511 = VECTOR('',#155512,1.); +#155512 = DIRECTION('',(-0.999954582852,9.530594550415E-03,0.)); +#155513 = ORIENTED_EDGE('',*,*,#155514,.T.); +#155514 = EDGE_CURVE('',#155507,#155515,#155517,.T.); +#155515 = VERTEX_POINT('',#155516); +#155516 = CARTESIAN_POINT('',(131.757176,-108.354617,1.585)); +#155517 = LINE('',#155518,#155519); +#155518 = CARTESIAN_POINT('',(131.788692,-108.365412,1.585)); +#155519 = VECTOR('',#155520,1.); +#155520 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#155521 = ORIENTED_EDGE('',*,*,#155522,.T.); +#155522 = EDGE_CURVE('',#155515,#155523,#155525,.T.); +#155523 = VERTEX_POINT('',#155524); +#155524 = CARTESIAN_POINT('',(131.56501,-108.255849,1.585)); +#155525 = LINE('',#155526,#155527); +#155526 = CARTESIAN_POINT('',(131.757176,-108.354617,1.585)); +#155527 = VECTOR('',#155528,1.); +#155528 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#155529 = ORIENTED_EDGE('',*,*,#155530,.T.); +#155530 = EDGE_CURVE('',#155523,#155531,#155533,.T.); +#155531 = VERTEX_POINT('',#155532); +#155532 = CARTESIAN_POINT('',(131.532412,-108.21708,1.585)); +#155533 = LINE('',#155534,#155535); +#155534 = CARTESIAN_POINT('',(131.56501,-108.255849,1.585)); +#155535 = VECTOR('',#155536,1.); +#155536 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#155537 = ORIENTED_EDGE('',*,*,#155538,.T.); +#155538 = EDGE_CURVE('',#155531,#155539,#155541,.T.); +#155539 = VERTEX_POINT('',#155540); +#155540 = CARTESIAN_POINT('',(131.435374,-108.018687,1.585)); +#155541 = LINE('',#155542,#155543); +#155542 = CARTESIAN_POINT('',(131.532412,-108.21708,1.585)); +#155543 = VECTOR('',#155544,1.); +#155544 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#155545 = ORIENTED_EDGE('',*,*,#155546,.T.); +#155546 = EDGE_CURVE('',#155539,#155547,#155549,.T.); +#155547 = VERTEX_POINT('',#155548); +#155548 = CARTESIAN_POINT('',(131.430935,-107.985671,1.585)); +#155549 = LINE('',#155550,#155551); +#155550 = CARTESIAN_POINT('',(131.435374,-108.018687,1.585)); +#155551 = VECTOR('',#155552,1.); +#155552 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#155553 = ORIENTED_EDGE('',*,*,#155554,.T.); +#155554 = EDGE_CURVE('',#155547,#155555,#155557,.T.); +#155555 = VERTEX_POINT('',#155556); +#155556 = CARTESIAN_POINT('',(131.433337,-107.875571,1.585)); +#155557 = LINE('',#155558,#155559); +#155558 = CARTESIAN_POINT('',(131.430935,-107.985671,1.585)); +#155559 = VECTOR('',#155560,1.); +#155560 = DIRECTION('',(2.181134037059E-02,0.999762104418,0.)); +#155561 = ORIENTED_EDGE('',*,*,#155562,.T.); +#155562 = EDGE_CURVE('',#155555,#155563,#155565,.T.); +#155563 = VERTEX_POINT('',#155564); +#155564 = CARTESIAN_POINT('',(131.444131,-107.844056,1.585)); +#155565 = LINE('',#155566,#155567); +#155566 = CARTESIAN_POINT('',(131.433337,-107.875571,1.585)); +#155567 = VECTOR('',#155568,1.); +#155568 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#155569 = ORIENTED_EDGE('',*,*,#155570,.T.); +#155570 = EDGE_CURVE('',#155563,#155571,#155573,.T.); +#155571 = VERTEX_POINT('',#155572); +#155572 = CARTESIAN_POINT('',(131.542899,-107.651889,1.585)); +#155573 = LINE('',#155574,#155575); +#155574 = CARTESIAN_POINT('',(131.444131,-107.844056,1.585)); +#155575 = VECTOR('',#155576,1.); +#155576 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#155577 = ORIENTED_EDGE('',*,*,#155578,.T.); +#155578 = EDGE_CURVE('',#155571,#155245,#155579,.T.); +#155579 = LINE('',#155580,#155581); +#155580 = CARTESIAN_POINT('',(131.542899,-107.651889,1.585)); +#155581 = VECTOR('',#155582,1.); +#155582 = DIRECTION('',(0.765399877272,0.643554992112,0.)); +#155583 = PLANE('',#155584); +#155584 = AXIS2_PLACEMENT_3D('',#155585,#155586,#155587); +#155585 = CARTESIAN_POINT('',(0.,0.,1.585)); +#155586 = DIRECTION('',(0.,0.,1.)); +#155587 = DIRECTION('',(1.,0.,-0.)); +#155588 = SHELL_BASED_SURFACE_MODEL('',(#155589)); +#155589 = OPEN_SHELL('',(#155590)); +#155590 = ADVANCED_FACE('',(#155591,#155827),#155878,.T.); +#155591 = FACE_BOUND('',#155592,.F.); +#155592 = EDGE_LOOP('',(#155593,#155603,#155611,#155619,#155627,#155635, + #155643,#155651,#155659,#155667,#155676,#155684,#155692,#155700, + #155708,#155716,#155724,#155733,#155741,#155749,#155757,#155765, + #155773,#155781,#155789,#155797,#155805,#155813,#155821)); +#155593 = ORIENTED_EDGE('',*,*,#155594,.T.); +#155594 = EDGE_CURVE('',#155595,#155597,#155599,.T.); +#155595 = VERTEX_POINT('',#155596); +#155596 = CARTESIAN_POINT('',(138.867384,-107.61929,1.585)); +#155597 = VERTEX_POINT('',#155598); +#155598 = CARTESIAN_POINT('',(139.065776,-107.522253,1.585)); +#155599 = LINE('',#155600,#155601); +#155600 = CARTESIAN_POINT('',(138.867384,-107.61929,1.585)); +#155601 = VECTOR('',#155602,1.); +#155602 = DIRECTION('',(0.898303312265,0.439375874593,0.)); +#155603 = ORIENTED_EDGE('',*,*,#155604,.T.); +#155604 = EDGE_CURVE('',#155597,#155605,#155607,.T.); +#155605 = VERTEX_POINT('',#155606); +#155606 = CARTESIAN_POINT('',(139.098792,-107.517814,1.585)); +#155607 = LINE('',#155608,#155609); +#155608 = CARTESIAN_POINT('',(139.065776,-107.522253,1.585)); +#155609 = VECTOR('',#155610,1.); +#155610 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#155611 = ORIENTED_EDGE('',*,*,#155612,.T.); +#155612 = EDGE_CURVE('',#155605,#155613,#155615,.T.); +#155613 = VERTEX_POINT('',#155614); +#155614 = CARTESIAN_POINT('',(139.466035,-107.520216,1.585)); +#155615 = LINE('',#155616,#155617); +#155616 = CARTESIAN_POINT('',(139.098792,-107.517814,1.585)); +#155617 = VECTOR('',#155618,1.); +#155618 = DIRECTION('',(0.999978610776,-6.540488513295E-03,0.)); +#155619 = ORIENTED_EDGE('',*,*,#155620,.T.); +#155620 = EDGE_CURVE('',#155613,#155621,#155623,.T.); +#155621 = VERTEX_POINT('',#155622); +#155622 = CARTESIAN_POINT('',(139.497551,-107.531011,1.585)); +#155623 = LINE('',#155624,#155625); +#155624 = CARTESIAN_POINT('',(139.466035,-107.520216,1.585)); +#155625 = VECTOR('',#155626,1.); +#155626 = DIRECTION('',(0.946042469829,-0.324042659659,0.)); +#155627 = ORIENTED_EDGE('',*,*,#155628,.T.); +#155628 = EDGE_CURVE('',#155621,#155629,#155631,.T.); +#155629 = VERTEX_POINT('',#155630); +#155630 = CARTESIAN_POINT('',(139.689716,-107.629779,1.585)); +#155631 = LINE('',#155632,#155633); +#155632 = CARTESIAN_POINT('',(139.497551,-107.531011,1.585)); +#155633 = VECTOR('',#155634,1.); +#155634 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#155635 = ORIENTED_EDGE('',*,*,#155636,.T.); +#155636 = EDGE_CURVE('',#155629,#155637,#155639,.T.); +#155637 = VERTEX_POINT('',#155638); +#155638 = CARTESIAN_POINT('',(139.722313,-107.668549,1.585)); +#155639 = LINE('',#155640,#155641); +#155640 = CARTESIAN_POINT('',(139.689716,-107.629779,1.585)); +#155641 = VECTOR('',#155642,1.); +#155642 = DIRECTION('',(0.643541585038,-0.765411149858,0.)); +#155643 = ORIENTED_EDGE('',*,*,#155644,.T.); +#155644 = EDGE_CURVE('',#155637,#155645,#155647,.T.); +#155645 = VERTEX_POINT('',#155646); +#155646 = CARTESIAN_POINT('',(139.819353,-107.866941,1.585)); +#155647 = LINE('',#155648,#155649); +#155648 = CARTESIAN_POINT('',(139.722313,-107.668549,1.585)); +#155649 = VECTOR('',#155650,1.); +#155650 = DIRECTION('',(0.439386835897,-0.898297950816,0.)); +#155651 = ORIENTED_EDGE('',*,*,#155652,.T.); +#155652 = EDGE_CURVE('',#155645,#155653,#155655,.T.); +#155653 = VERTEX_POINT('',#155654); +#155654 = CARTESIAN_POINT('',(139.823792,-107.899957,1.585)); +#155655 = LINE('',#155656,#155657); +#155656 = CARTESIAN_POINT('',(139.819353,-107.866941,1.585)); +#155657 = VECTOR('',#155658,1.); +#155658 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#155659 = ORIENTED_EDGE('',*,*,#155660,.T.); +#155660 = EDGE_CURVE('',#155653,#155661,#155663,.T.); +#155661 = VERTEX_POINT('',#155662); +#155662 = CARTESIAN_POINT('',(139.82139,-108.095771,1.585)); +#155663 = LINE('',#155664,#155665); +#155664 = CARTESIAN_POINT('',(139.823792,-107.899957,1.585)); +#155665 = VECTOR('',#155666,1.); +#155666 = DIRECTION('',(-1.226582012691E-02,-0.999924771999,0.)); +#155667 = ORIENTED_EDGE('',*,*,#155668,.T.); +#155668 = EDGE_CURVE('',#155661,#155669,#155671,.T.); +#155669 = VERTEX_POINT('',#155670); +#155670 = CARTESIAN_POINT('',(139.723307,-108.193958,1.585)); +#155671 = CIRCLE('',#155672,0.124999730291); +#155672 = AXIS2_PLACEMENT_3D('',#155673,#155674,#155675); +#155673 = CARTESIAN_POINT('',(139.6987918965,-108.0713858079,1.585)); +#155674 = DIRECTION('',(0.,0.,-1.)); +#155675 = DIRECTION('',(0.980786944144,-0.195081957639,0.)); +#155676 = ORIENTED_EDGE('',*,*,#155677,.T.); +#155677 = EDGE_CURVE('',#155669,#155678,#155680,.T.); +#155678 = VERTEX_POINT('',#155679); +#155679 = CARTESIAN_POINT('',(138.966649,-108.345289,1.585)); +#155680 = LINE('',#155681,#155682); +#155681 = CARTESIAN_POINT('',(139.723307,-108.193958,1.585)); +#155682 = VECTOR('',#155683,1.); +#155683 = DIRECTION('',(-0.980580825222,-0.196115387482,0.)); +#155684 = ORIENTED_EDGE('',*,*,#155685,.T.); +#155685 = EDGE_CURVE('',#155678,#155686,#155688,.T.); +#155686 = VERTEX_POINT('',#155687); +#155687 = CARTESIAN_POINT('',(138.966649,-108.556162,1.585)); +#155688 = LINE('',#155689,#155690); +#155689 = CARTESIAN_POINT('',(138.966649,-108.345289,1.585)); +#155690 = VECTOR('',#155691,1.); +#155691 = DIRECTION('',(0.,-1.,0.)); +#155692 = ORIENTED_EDGE('',*,*,#155693,.T.); +#155693 = EDGE_CURVE('',#155686,#155694,#155696,.T.); +#155694 = VERTEX_POINT('',#155695); +#155695 = CARTESIAN_POINT('',(139.020532,-108.66393,1.585)); +#155696 = LINE('',#155697,#155698); +#155697 = CARTESIAN_POINT('',(138.966649,-108.556162,1.585)); +#155698 = VECTOR('',#155699,1.); +#155699 = DIRECTION('',(0.447206955814,-0.894430510812,0.)); +#155700 = ORIENTED_EDGE('',*,*,#155701,.T.); +#155701 = EDGE_CURVE('',#155694,#155702,#155704,.T.); +#155702 = VERTEX_POINT('',#155703); +#155703 = CARTESIAN_POINT('',(139.128301,-108.717814,1.585)); +#155704 = LINE('',#155705,#155706); +#155705 = CARTESIAN_POINT('',(139.020532,-108.66393,1.585)); +#155706 = VECTOR('',#155707,1.); +#155707 = DIRECTION('',(0.894428850894,-0.447210275697,0.)); +#155708 = ORIENTED_EDGE('',*,*,#155709,.T.); +#155709 = EDGE_CURVE('',#155702,#155710,#155712,.T.); +#155710 = VERTEX_POINT('',#155711); +#155711 = CARTESIAN_POINT('',(139.412141,-108.717814,1.585)); +#155712 = LINE('',#155713,#155714); +#155713 = CARTESIAN_POINT('',(139.128301,-108.717814,1.585)); +#155714 = VECTOR('',#155715,1.); +#155715 = DIRECTION('',(1.,0.,0.)); +#155716 = ORIENTED_EDGE('',*,*,#155717,.T.); +#155717 = EDGE_CURVE('',#155710,#155718,#155720,.T.); +#155718 = VERTEX_POINT('',#155719); +#155719 = CARTESIAN_POINT('',(139.580061,-108.636539,1.585)); +#155720 = LINE('',#155721,#155722); +#155721 = CARTESIAN_POINT('',(139.412141,-108.717814,1.585)); +#155722 = VECTOR('',#155723,1.); +#155723 = DIRECTION('',(0.90011009407,0.435662505333,0.)); +#155724 = ORIENTED_EDGE('',*,*,#155725,.T.); +#155725 = EDGE_CURVE('',#155718,#155726,#155728,.T.); +#155726 = VERTEX_POINT('',#155727); +#155727 = CARTESIAN_POINT('',(139.689716,-108.855849,1.585)); +#155728 = CIRCLE('',#155729,0.124999889885); +#155729 = AXIS2_PLACEMENT_3D('',#155730,#155731,#155732); +#155730 = CARTESIAN_POINT('',(139.61307660067,-108.7570999496,1.585)); +#155731 = DIRECTION('',(0.,0.,-1.)); +#155732 = DIRECTION('',(-0.264125038109,0.964488446921,-0.)); +#155733 = ORIENTED_EDGE('',*,*,#155734,.T.); +#155734 = EDGE_CURVE('',#155726,#155735,#155737,.T.); +#155735 = VERTEX_POINT('',#155736); +#155736 = CARTESIAN_POINT('',(139.474665,-108.963375,1.585)); +#155737 = LINE('',#155738,#155739); +#155738 = CARTESIAN_POINT('',(139.689716,-108.855849,1.585)); +#155739 = VECTOR('',#155740,1.); +#155740 = DIRECTION('',(-0.894426359171,-0.447215259154,0.)); +#155741 = ORIENTED_EDGE('',*,*,#155742,.T.); +#155742 = EDGE_CURVE('',#155735,#155743,#155745,.T.); +#155743 = VERTEX_POINT('',#155744); +#155744 = CARTESIAN_POINT('',(139.441649,-108.967814,1.585)); +#155745 = LINE('',#155746,#155747); +#155746 = CARTESIAN_POINT('',(139.474665,-108.963375,1.585)); +#155747 = VECTOR('',#155748,1.); +#155748 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#155749 = ORIENTED_EDGE('',*,*,#155750,.T.); +#155750 = EDGE_CURVE('',#155743,#155751,#155753,.T.); +#155751 = VERTEX_POINT('',#155752); +#155752 = CARTESIAN_POINT('',(139.074406,-108.965412,1.585)); +#155753 = LINE('',#155754,#155755); +#155754 = CARTESIAN_POINT('',(139.441649,-108.967814,1.585)); +#155755 = VECTOR('',#155756,1.); +#155756 = DIRECTION('',(-0.999978610776,6.540488513295E-03,0.)); +#155757 = ORIENTED_EDGE('',*,*,#155758,.T.); +#155758 = EDGE_CURVE('',#155751,#155759,#155761,.T.); +#155759 = VERTEX_POINT('',#155760); +#155760 = CARTESIAN_POINT('',(139.04289,-108.954617,1.585)); +#155761 = LINE('',#155762,#155763); +#155762 = CARTESIAN_POINT('',(139.074406,-108.965412,1.585)); +#155763 = VECTOR('',#155764,1.); +#155764 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#155765 = ORIENTED_EDGE('',*,*,#155766,.T.); +#155766 = EDGE_CURVE('',#155759,#155767,#155769,.T.); +#155767 = VERTEX_POINT('',#155768); +#155768 = CARTESIAN_POINT('',(138.850724,-108.855849,1.585)); +#155769 = LINE('',#155770,#155771); +#155770 = CARTESIAN_POINT('',(139.04289,-108.954617,1.585)); +#155771 = VECTOR('',#155772,1.); +#155772 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#155773 = ORIENTED_EDGE('',*,*,#155774,.T.); +#155774 = EDGE_CURVE('',#155767,#155775,#155777,.T.); +#155775 = VERTEX_POINT('',#155776); +#155776 = CARTESIAN_POINT('',(138.818126,-108.81708,1.585)); +#155777 = LINE('',#155778,#155779); +#155778 = CARTESIAN_POINT('',(138.850724,-108.855849,1.585)); +#155779 = VECTOR('',#155780,1.); +#155780 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#155781 = ORIENTED_EDGE('',*,*,#155782,.T.); +#155782 = EDGE_CURVE('',#155775,#155783,#155785,.T.); +#155783 = VERTEX_POINT('',#155784); +#155784 = CARTESIAN_POINT('',(138.721088,-108.618687,1.585)); +#155785 = LINE('',#155786,#155787); +#155786 = CARTESIAN_POINT('',(138.818126,-108.81708,1.585)); +#155787 = VECTOR('',#155788,1.); +#155788 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#155789 = ORIENTED_EDGE('',*,*,#155790,.T.); +#155790 = EDGE_CURVE('',#155783,#155791,#155793,.T.); +#155791 = VERTEX_POINT('',#155792); +#155792 = CARTESIAN_POINT('',(138.716649,-108.585671,1.585)); +#155793 = LINE('',#155794,#155795); +#155794 = CARTESIAN_POINT('',(138.721088,-108.618687,1.585)); +#155795 = VECTOR('',#155796,1.); +#155796 = DIRECTION('',(-0.133250982623,0.991082325355,0.)); +#155797 = ORIENTED_EDGE('',*,*,#155798,.T.); +#155798 = EDGE_CURVE('',#155791,#155799,#155801,.T.); +#155799 = VERTEX_POINT('',#155800); +#155800 = CARTESIAN_POINT('',(138.719051,-107.875571,1.585)); +#155801 = LINE('',#155802,#155803); +#155802 = CARTESIAN_POINT('',(138.716649,-108.585671,1.585)); +#155803 = VECTOR('',#155804,1.); +#155804 = DIRECTION('',(3.382602813877E-03,0.999994278983,0.)); +#155805 = ORIENTED_EDGE('',*,*,#155806,.T.); +#155806 = EDGE_CURVE('',#155799,#155807,#155809,.T.); +#155807 = VERTEX_POINT('',#155808); +#155808 = CARTESIAN_POINT('',(138.729845,-107.844056,1.585)); +#155809 = LINE('',#155810,#155811); +#155810 = CARTESIAN_POINT('',(138.719051,-107.875571,1.585)); +#155811 = VECTOR('',#155812,1.); +#155812 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#155813 = ORIENTED_EDGE('',*,*,#155814,.T.); +#155814 = EDGE_CURVE('',#155807,#155815,#155817,.T.); +#155815 = VERTEX_POINT('',#155816); +#155816 = CARTESIAN_POINT('',(138.828613,-107.651889,1.585)); +#155817 = LINE('',#155818,#155819); +#155818 = CARTESIAN_POINT('',(138.729845,-107.844056,1.585)); +#155819 = VECTOR('',#155820,1.); +#155820 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#155821 = ORIENTED_EDGE('',*,*,#155822,.T.); +#155822 = EDGE_CURVE('',#155815,#155595,#155823,.T.); +#155823 = LINE('',#155824,#155825); +#155824 = CARTESIAN_POINT('',(138.828613,-107.651889,1.585)); +#155825 = VECTOR('',#155826,1.); +#155826 = DIRECTION('',(0.765399877272,0.643554992112,0.)); +#155827 = FACE_BOUND('',#155828,.F.); +#155828 = EDGE_LOOP('',(#155829,#155840,#155848,#155856,#155864,#155872) + ); +#155829 = ORIENTED_EDGE('',*,*,#155830,.T.); +#155830 = EDGE_CURVE('',#155831,#155833,#155835,.T.); +#155831 = VERTEX_POINT('',#155832); +#155832 = CARTESIAN_POINT('',(139.519907,-107.821697,1.585)); +#155833 = VERTEX_POINT('',#155834); +#155834 = CARTESIAN_POINT('',(139.020532,-107.821698,1.585)); +#155835 = CIRCLE('',#155836,0.441959003379); +#155836 = AXIS2_PLACEMENT_3D('',#155837,#155838,#155839); +#155837 = CARTESIAN_POINT('',(139.27022023025,-108.1863670943,1.585)); +#155838 = DIRECTION('',(0.,0.,1.)); +#155839 = DIRECTION('',(0.564954594972,0.825121994386,-0.)); +#155840 = ORIENTED_EDGE('',*,*,#155841,.T.); +#155841 = EDGE_CURVE('',#155833,#155842,#155844,.T.); +#155842 = VERTEX_POINT('',#155843); +#155843 = CARTESIAN_POINT('',(138.966649,-107.929465,1.585)); +#155844 = LINE('',#155845,#155846); +#155845 = CARTESIAN_POINT('',(139.020532,-107.821698,1.585)); +#155846 = VECTOR('',#155847,1.); +#155847 = DIRECTION('',(-0.447210275635,-0.894428850925,0.)); +#155848 = ORIENTED_EDGE('',*,*,#155849,.T.); +#155849 = EDGE_CURVE('',#155842,#155850,#155852,.T.); +#155850 = VERTEX_POINT('',#155851); +#155851 = CARTESIAN_POINT('',(138.966649,-108.090337,1.585)); +#155852 = LINE('',#155853,#155854); +#155853 = CARTESIAN_POINT('',(138.966649,-107.929465,1.585)); +#155854 = VECTOR('',#155855,1.); +#155855 = DIRECTION('',(0.,-1.,0.)); +#155856 = ORIENTED_EDGE('',*,*,#155857,.T.); +#155857 = EDGE_CURVE('',#155850,#155858,#155860,.T.); +#155858 = VERTEX_POINT('',#155859); +#155859 = CARTESIAN_POINT('',(139.573792,-107.968909,1.585)); +#155860 = LINE('',#155861,#155862); +#155861 = CARTESIAN_POINT('',(138.966649,-108.090337,1.585)); +#155862 = VECTOR('',#155863,1.); +#155863 = DIRECTION('',(0.980580862045,0.196115203365,0.)); +#155864 = ORIENTED_EDGE('',*,*,#155865,.T.); +#155865 = EDGE_CURVE('',#155858,#155866,#155868,.T.); +#155866 = VERTEX_POINT('',#155867); +#155867 = CARTESIAN_POINT('',(139.573792,-107.929465,1.585)); +#155868 = LINE('',#155869,#155870); +#155869 = CARTESIAN_POINT('',(139.573792,-107.968909,1.585)); +#155870 = VECTOR('',#155871,1.); +#155871 = DIRECTION('',(0.,1.,0.)); +#155872 = ORIENTED_EDGE('',*,*,#155873,.T.); +#155873 = EDGE_CURVE('',#155866,#155831,#155874,.T.); +#155874 = LINE('',#155875,#155876); +#155875 = CARTESIAN_POINT('',(139.573792,-107.929465,1.585)); +#155876 = VECTOR('',#155877,1.); +#155877 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#155878 = PLANE('',#155879); +#155879 = AXIS2_PLACEMENT_3D('',#155880,#155881,#155882); +#155880 = CARTESIAN_POINT('',(0.,0.,1.585)); +#155881 = DIRECTION('',(0.,0.,1.)); +#155882 = DIRECTION('',(1.,0.,-0.)); +#155883 = SHELL_BASED_SURFACE_MODEL('',(#155884)); +#155884 = OPEN_SHELL('',(#155885)); +#155885 = ADVANCED_FACE('',(#155886,#156082,#156149),#156201,.T.); +#155886 = FACE_BOUND('',#155887,.F.); +#155887 = EDGE_LOOP('',(#155888,#155899,#155907,#155915,#155923,#155931, + #155939,#155947,#155955,#155963,#155971,#155979,#155987,#155995, + #156003,#156011,#156019,#156027,#156035,#156043,#156051,#156059, + #156067,#156076)); +#155888 = ORIENTED_EDGE('',*,*,#155889,.T.); +#155889 = EDGE_CURVE('',#155890,#155892,#155894,.T.); +#155890 = VERTEX_POINT('',#155891); +#155891 = CARTESIAN_POINT('',(147.033337,-107.018428,1.585)); +#155892 = VERTEX_POINT('',#155893); +#155893 = CARTESIAN_POINT('',(147.131549,-106.920216,1.585)); +#155894 = CIRCLE('',#155895,0.124998078635); +#155895 = AXIS2_PLACEMENT_3D('',#155896,#155897,#155898); +#155896 = CARTESIAN_POINT('',(147.15593354765,-107.0428125476,1.585)); +#155897 = DIRECTION('',(0.,0.,-1.)); +#155898 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#155899 = ORIENTED_EDGE('',*,*,#155900,.T.); +#155900 = EDGE_CURVE('',#155892,#155901,#155903,.T.); +#155901 = VERTEX_POINT('',#155902); +#155902 = CARTESIAN_POINT('',(147.780321,-106.920216,1.585)); +#155903 = LINE('',#155904,#155905); +#155904 = CARTESIAN_POINT('',(147.131549,-106.920216,1.585)); +#155905 = VECTOR('',#155906,1.); +#155906 = DIRECTION('',(1.,0.,0.)); +#155907 = ORIENTED_EDGE('',*,*,#155908,.T.); +#155908 = EDGE_CURVE('',#155901,#155909,#155911,.T.); +#155909 = VERTEX_POINT('',#155910); +#155910 = CARTESIAN_POINT('',(147.811836,-106.93101,1.585)); +#155911 = LINE('',#155912,#155913); +#155912 = CARTESIAN_POINT('',(147.780321,-106.920216,1.585)); +#155913 = VECTOR('',#155914,1.); +#155914 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#155915 = ORIENTED_EDGE('',*,*,#155916,.T.); +#155916 = EDGE_CURVE('',#155909,#155917,#155919,.T.); +#155917 = VERTEX_POINT('',#155918); +#155918 = CARTESIAN_POINT('',(148.004003,-107.029778,1.585)); +#155919 = LINE('',#155920,#155921); +#155920 = CARTESIAN_POINT('',(147.811836,-106.93101,1.585)); +#155921 = VECTOR('',#155922,1.); +#155922 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#155923 = ORIENTED_EDGE('',*,*,#155924,.T.); +#155924 = EDGE_CURVE('',#155917,#155925,#155927,.T.); +#155925 = VERTEX_POINT('',#155926); +#155926 = CARTESIAN_POINT('',(148.117011,-107.144796,1.585)); +#155927 = LINE('',#155928,#155929); +#155928 = CARTESIAN_POINT('',(148.004003,-107.029778,1.585)); +#155929 = VECTOR('',#155930,1.); +#155930 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#155931 = ORIENTED_EDGE('',*,*,#155932,.T.); +#155932 = EDGE_CURVE('',#155925,#155933,#155935,.T.); +#155933 = VERTEX_POINT('',#155934); +#155934 = CARTESIAN_POINT('',(148.219353,-107.352655,1.585)); +#155935 = LINE('',#155936,#155937); +#155936 = CARTESIAN_POINT('',(148.117011,-107.144796,1.585)); +#155937 = VECTOR('',#155938,1.); +#155938 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#155939 = ORIENTED_EDGE('',*,*,#155940,.T.); +#155940 = EDGE_CURVE('',#155933,#155941,#155943,.T.); +#155941 = VERTEX_POINT('',#155942); +#155942 = CARTESIAN_POINT('',(148.223792,-107.385671,1.585)); +#155943 = LINE('',#155944,#155945); +#155944 = CARTESIAN_POINT('',(148.219353,-107.352655,1.585)); +#155945 = VECTOR('',#155946,1.); +#155946 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#155947 = ORIENTED_EDGE('',*,*,#155948,.T.); +#155948 = EDGE_CURVE('',#155941,#155949,#155951,.T.); +#155949 = VERTEX_POINT('',#155950); +#155950 = CARTESIAN_POINT('',(148.22139,-107.581486,1.585)); +#155951 = LINE('',#155952,#155953); +#155952 = CARTESIAN_POINT('',(148.223792,-107.385671,1.585)); +#155953 = VECTOR('',#155954,1.); +#155954 = DIRECTION('',(-1.226575749649E-02,-0.999924772767,0.)); +#155955 = ORIENTED_EDGE('',*,*,#155956,.T.); +#155956 = EDGE_CURVE('',#155949,#155957,#155959,.T.); +#155957 = VERTEX_POINT('',#155958); +#155958 = CARTESIAN_POINT('',(148.210595,-107.613002,1.585)); +#155959 = LINE('',#155960,#155961); +#155960 = CARTESIAN_POINT('',(148.22139,-107.581486,1.585)); +#155961 = VECTOR('',#155962,1.); +#155962 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#155963 = ORIENTED_EDGE('',*,*,#155964,.T.); +#155964 = EDGE_CURVE('',#155957,#155965,#155967,.T.); +#155965 = VERTEX_POINT('',#155966); +#155966 = CARTESIAN_POINT('',(148.111827,-107.805167,1.585)); +#155967 = LINE('',#155968,#155969); +#155968 = CARTESIAN_POINT('',(148.210595,-107.613002,1.585)); +#155969 = VECTOR('',#155970,1.); +#155970 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#155971 = ORIENTED_EDGE('',*,*,#155972,.T.); +#155972 = EDGE_CURVE('',#155965,#155973,#155975,.T.); +#155973 = VERTEX_POINT('',#155974); +#155974 = CARTESIAN_POINT('',(148.052606,-107.867085,1.585)); +#155975 = LINE('',#155976,#155977); +#155976 = CARTESIAN_POINT('',(148.111827,-107.805167,1.585)); +#155977 = VECTOR('',#155978,1.); +#155978 = DIRECTION('',(-0.691192700655,-0.722670499302,0.)); +#155979 = ORIENTED_EDGE('',*,*,#155980,.T.); +#155980 = EDGE_CURVE('',#155973,#155981,#155983,.T.); +#155981 = VERTEX_POINT('',#155982); +#155982 = CARTESIAN_POINT('',(148.082524,-107.881738,1.585)); +#155983 = LINE('',#155984,#155985); +#155984 = CARTESIAN_POINT('',(148.052606,-107.867085,1.585)); +#155985 = VECTOR('',#155986,1.); +#155986 = DIRECTION('',(0.898071177728,-0.439850156001,0.)); +#155987 = ORIENTED_EDGE('',*,*,#155988,.T.); +#155988 = EDGE_CURVE('',#155981,#155989,#155991,.T.); +#155989 = VERTEX_POINT('',#155990); +#155990 = CARTESIAN_POINT('',(148.202725,-108.001939,1.585)); +#155991 = LINE('',#155992,#155993); +#155992 = CARTESIAN_POINT('',(148.082524,-107.881738,1.585)); +#155993 = VECTOR('',#155994,1.); +#155994 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#155995 = ORIENTED_EDGE('',*,*,#155996,.T.); +#155996 = EDGE_CURVE('',#155989,#155997,#155999,.T.); +#155997 = VERTEX_POINT('',#155998); +#155998 = CARTESIAN_POINT('',(148.305067,-108.209798,1.585)); +#155999 = LINE('',#156000,#156001); +#156000 = CARTESIAN_POINT('',(148.202725,-108.001939,1.585)); +#156001 = VECTOR('',#156002,1.); +#156002 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#156003 = ORIENTED_EDGE('',*,*,#156004,.T.); +#156004 = EDGE_CURVE('',#155997,#156005,#156007,.T.); +#156005 = VERTEX_POINT('',#156006); +#156006 = CARTESIAN_POINT('',(148.309506,-108.242814,1.585)); +#156007 = LINE('',#156008,#156009); +#156008 = CARTESIAN_POINT('',(148.305067,-108.209798,1.585)); +#156009 = VECTOR('',#156010,1.); +#156010 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#156011 = ORIENTED_EDGE('',*,*,#156012,.T.); +#156012 = EDGE_CURVE('',#156005,#156013,#156015,.T.); +#156013 = VERTEX_POINT('',#156014); +#156014 = CARTESIAN_POINT('',(148.307104,-108.524343,1.585)); +#156015 = LINE('',#156016,#156017); +#156016 = CARTESIAN_POINT('',(148.309506,-108.242814,1.585)); +#156017 = VECTOR('',#156018,1.); +#156018 = DIRECTION('',(-8.531670195019E-03,-0.99996360464,0.)); +#156019 = ORIENTED_EDGE('',*,*,#156020,.T.); +#156020 = EDGE_CURVE('',#156013,#156021,#156023,.T.); +#156021 = VERTEX_POINT('',#156022); +#156022 = CARTESIAN_POINT('',(148.296309,-108.555859,1.585)); +#156023 = LINE('',#156024,#156025); +#156024 = CARTESIAN_POINT('',(148.307104,-108.524343,1.585)); +#156025 = VECTOR('',#156026,1.); +#156026 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#156027 = ORIENTED_EDGE('',*,*,#156028,.T.); +#156028 = EDGE_CURVE('',#156021,#156029,#156031,.T.); +#156029 = VERTEX_POINT('',#156030); +#156030 = CARTESIAN_POINT('',(148.197541,-108.748024,1.585)); +#156031 = LINE('',#156032,#156033); +#156032 = CARTESIAN_POINT('',(148.296309,-108.555859,1.585)); +#156033 = VECTOR('',#156034,1.); +#156034 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#156035 = ORIENTED_EDGE('',*,*,#156036,.T.); +#156036 = EDGE_CURVE('',#156029,#156037,#156039,.T.); +#156037 = VERTEX_POINT('',#156038); +#156038 = CARTESIAN_POINT('',(148.082525,-108.861033,1.585)); +#156039 = LINE('',#156040,#156041); +#156040 = CARTESIAN_POINT('',(148.197541,-108.748024,1.585)); +#156041 = VECTOR('',#156042,1.); +#156042 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#156043 = ORIENTED_EDGE('',*,*,#156044,.T.); +#156044 = EDGE_CURVE('',#156037,#156045,#156047,.T.); +#156045 = VERTEX_POINT('',#156046); +#156046 = CARTESIAN_POINT('',(147.874665,-108.963375,1.585)); +#156047 = LINE('',#156048,#156049); +#156048 = CARTESIAN_POINT('',(148.082525,-108.861033,1.585)); +#156049 = VECTOR('',#156050,1.); +#156050 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#156051 = ORIENTED_EDGE('',*,*,#156052,.T.); +#156052 = EDGE_CURVE('',#156045,#156053,#156055,.T.); +#156053 = VERTEX_POINT('',#156054); +#156054 = CARTESIAN_POINT('',(147.841649,-108.967814,1.585)); +#156055 = LINE('',#156056,#156057); +#156056 = CARTESIAN_POINT('',(147.874665,-108.963375,1.585)); +#156057 = VECTOR('',#156058,1.); +#156058 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#156059 = ORIENTED_EDGE('',*,*,#156060,.T.); +#156060 = EDGE_CURVE('',#156053,#156061,#156063,.T.); +#156061 = VERTEX_POINT('',#156062); +#156062 = CARTESIAN_POINT('',(147.131549,-108.965412,1.585)); +#156063 = LINE('',#156064,#156065); +#156064 = CARTESIAN_POINT('',(147.841649,-108.967814,1.585)); +#156065 = VECTOR('',#156066,1.); +#156066 = DIRECTION('',(-0.999994278983,3.382602813857E-03,0.)); +#156067 = ORIENTED_EDGE('',*,*,#156068,.T.); +#156068 = EDGE_CURVE('',#156061,#156069,#156071,.T.); +#156069 = VERTEX_POINT('',#156070); +#156070 = CARTESIAN_POINT('',(147.033337,-108.8672,1.585)); +#156071 = CIRCLE('',#156072,0.124998078635); +#156072 = AXIS2_PLACEMENT_3D('',#156073,#156074,#156075); +#156073 = CARTESIAN_POINT('',(147.15593354765,-108.8428154523,1.585)); +#156074 = DIRECTION('',(0.,0.,-1.)); +#156075 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#156076 = ORIENTED_EDGE('',*,*,#156077,.T.); +#156077 = EDGE_CURVE('',#156069,#155890,#156078,.T.); +#156078 = LINE('',#156079,#156080); +#156079 = CARTESIAN_POINT('',(147.033337,-108.8672,1.585)); +#156080 = VECTOR('',#156081,1.); +#156081 = DIRECTION('',(0.,1.,0.)); +#156082 = FACE_BOUND('',#156083,.F.); +#156083 = EDGE_LOOP('',(#156084,#156094,#156102,#156110,#156118,#156127, + #156135,#156143)); +#156084 = ORIENTED_EDGE('',*,*,#156085,.T.); +#156085 = EDGE_CURVE('',#156086,#156088,#156090,.T.); +#156086 = VERTEX_POINT('',#156087); +#156087 = CARTESIAN_POINT('',(147.945556,-108.094925,1.585)); +#156088 = VERTEX_POINT('',#156089); +#156089 = CARTESIAN_POINT('',(147.735652,-108.024957,1.585)); +#156090 = LINE('',#156091,#156092); +#156091 = CARTESIAN_POINT('',(147.945556,-108.094925,1.585)); +#156092 = VECTOR('',#156093,1.); +#156093 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#156094 = ORIENTED_EDGE('',*,*,#156095,.T.); +#156095 = EDGE_CURVE('',#156088,#156096,#156098,.T.); +#156096 = VERTEX_POINT('',#156097); +#156097 = CARTESIAN_POINT('',(147.280935,-108.024957,1.585)); +#156098 = LINE('',#156099,#156100); +#156099 = CARTESIAN_POINT('',(147.735652,-108.024957,1.585)); +#156100 = VECTOR('',#156101,1.); +#156101 = DIRECTION('',(-1.,0.,0.)); +#156102 = ORIENTED_EDGE('',*,*,#156103,.T.); +#156103 = EDGE_CURVE('',#156096,#156104,#156106,.T.); +#156104 = VERTEX_POINT('',#156105); +#156105 = CARTESIAN_POINT('',(147.280935,-108.717814,1.585)); +#156106 = LINE('',#156107,#156108); +#156107 = CARTESIAN_POINT('',(147.280935,-108.024957,1.585)); +#156108 = VECTOR('',#156109,1.); +#156109 = DIRECTION('',(0.,-1.,0.)); +#156110 = ORIENTED_EDGE('',*,*,#156111,.T.); +#156111 = EDGE_CURVE('',#156104,#156112,#156114,.T.); +#156112 = VERTEX_POINT('',#156113); +#156113 = CARTESIAN_POINT('',(147.81214,-108.717814,1.585)); +#156114 = LINE('',#156115,#156116); +#156115 = CARTESIAN_POINT('',(147.280935,-108.717814,1.585)); +#156116 = VECTOR('',#156117,1.); +#156117 = DIRECTION('',(1.,0.,0.)); +#156118 = ORIENTED_EDGE('',*,*,#156119,.T.); +#156119 = EDGE_CURVE('',#156112,#156120,#156122,.T.); +#156120 = VERTEX_POINT('',#156121); +#156121 = CARTESIAN_POINT('',(148.059506,-108.470448,1.585)); +#156122 = CIRCLE('',#156123,0.347641001424); +#156123 = AXIS2_PLACEMENT_3D('',#156124,#156125,#156126); +#156124 = CARTESIAN_POINT('',(147.72338560111,-108.3816936011,1.585)); +#156125 = DIRECTION('',(0.,0.,1.)); +#156126 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#156127 = ORIENTED_EDGE('',*,*,#156128,.T.); +#156128 = EDGE_CURVE('',#156120,#156129,#156131,.T.); +#156129 = VERTEX_POINT('',#156130); +#156130 = CARTESIAN_POINT('',(148.059506,-108.272322,1.585)); +#156131 = LINE('',#156132,#156133); +#156132 = CARTESIAN_POINT('',(148.059506,-108.470448,1.585)); +#156133 = VECTOR('',#156134,1.); +#156134 = DIRECTION('',(0.,1.,0.)); +#156135 = ORIENTED_EDGE('',*,*,#156136,.T.); +#156136 = EDGE_CURVE('',#156129,#156137,#156139,.T.); +#156137 = VERTEX_POINT('',#156138); +#156138 = CARTESIAN_POINT('',(147.996058,-108.145427,1.585)); +#156139 = LINE('',#156140,#156141); +#156140 = CARTESIAN_POINT('',(148.059506,-108.272322,1.585)); +#156141 = VECTOR('',#156142,1.); +#156142 = DIRECTION('',(-0.447216414918,0.894425781285,0.)); +#156143 = ORIENTED_EDGE('',*,*,#156144,.T.); +#156144 = EDGE_CURVE('',#156137,#156086,#156145,.T.); +#156145 = LINE('',#156146,#156147); +#156146 = CARTESIAN_POINT('',(147.996058,-108.145427,1.585)); +#156147 = VECTOR('',#156148,1.); +#156148 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#156149 = FACE_BOUND('',#156150,.F.); +#156150 = EDGE_LOOP('',(#156151,#156162,#156170,#156178,#156186,#156195) + ); +#156151 = ORIENTED_EDGE('',*,*,#156152,.T.); +#156152 = EDGE_CURVE('',#156153,#156155,#156157,.T.); +#156153 = VERTEX_POINT('',#156154); +#156154 = CARTESIAN_POINT('',(147.973792,-107.415179,1.585)); +#156155 = VERTEX_POINT('',#156156); +#156156 = CARTESIAN_POINT('',(147.726426,-107.167814,1.585)); +#156157 = CIRCLE('',#156158,0.347631916063); +#156158 = AXIS2_PLACEMENT_3D('',#156159,#156160,#156161); +#156159 = CARTESIAN_POINT('',(147.63767931879,-107.5039270399,1.585)); +#156160 = DIRECTION('',(0.,0.,1.)); +#156161 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#156162 = ORIENTED_EDGE('',*,*,#156163,.T.); +#156163 = EDGE_CURVE('',#156155,#156164,#156166,.T.); +#156164 = VERTEX_POINT('',#156165); +#156165 = CARTESIAN_POINT('',(147.280935,-107.167814,1.585)); +#156166 = LINE('',#156167,#156168); +#156167 = CARTESIAN_POINT('',(147.726426,-107.167814,1.585)); +#156168 = VECTOR('',#156169,1.); +#156169 = DIRECTION('',(-1.,0.,0.)); +#156170 = ORIENTED_EDGE('',*,*,#156171,.T.); +#156171 = EDGE_CURVE('',#156164,#156172,#156174,.T.); +#156172 = VERTEX_POINT('',#156173); +#156173 = CARTESIAN_POINT('',(147.280935,-107.774957,1.585)); +#156174 = LINE('',#156175,#156176); +#156175 = CARTESIAN_POINT('',(147.280935,-107.167814,1.585)); +#156176 = VECTOR('',#156177,1.); +#156177 = DIRECTION('',(0.,-1.,0.)); +#156178 = ORIENTED_EDGE('',*,*,#156179,.T.); +#156179 = EDGE_CURVE('',#156172,#156180,#156182,.T.); +#156180 = VERTEX_POINT('',#156181); +#156181 = CARTESIAN_POINT('',(147.726427,-107.774957,1.585)); +#156182 = LINE('',#156183,#156184); +#156183 = CARTESIAN_POINT('',(147.280935,-107.774957,1.585)); +#156184 = VECTOR('',#156185,1.); +#156185 = DIRECTION('',(1.,0.,0.)); +#156186 = ORIENTED_EDGE('',*,*,#156187,.T.); +#156187 = EDGE_CURVE('',#156180,#156188,#156190,.T.); +#156188 = VERTEX_POINT('',#156189); +#156189 = CARTESIAN_POINT('',(147.973792,-107.527591,1.585)); +#156190 = CIRCLE('',#156191,0.347639125489); +#156191 = AXIS2_PLACEMENT_3D('',#156192,#156193,#156194); +#156192 = CARTESIAN_POINT('',(147.63767306109,-107.4388384198,1.585)); +#156193 = DIRECTION('',(0.,0.,1.)); +#156194 = DIRECTION('',(0.255304804327,-0.966860619163,0.)); +#156195 = ORIENTED_EDGE('',*,*,#156196,.T.); +#156196 = EDGE_CURVE('',#156188,#156153,#156197,.T.); +#156197 = LINE('',#156198,#156199); +#156198 = CARTESIAN_POINT('',(147.973792,-107.527591,1.585)); +#156199 = VECTOR('',#156200,1.); +#156200 = DIRECTION('',(0.,1.,0.)); +#156201 = PLANE('',#156202); +#156202 = AXIS2_PLACEMENT_3D('',#156203,#156204,#156205); +#156203 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156204 = DIRECTION('',(0.,0.,1.)); +#156205 = DIRECTION('',(1.,0.,-0.)); +#156206 = SHELL_BASED_SURFACE_MODEL('',(#156207)); +#156207 = OPEN_SHELL('',(#156208)); +#156208 = ADVANCED_FACE('',(#156209,#156403),#156473,.T.); +#156209 = FACE_BOUND('',#156210,.F.); +#156210 = EDGE_LOOP('',(#156211,#156221,#156229,#156237,#156245,#156253, + #156261,#156269,#156277,#156285,#156293,#156301,#156309,#156317, + #156325,#156333,#156341,#156349,#156357,#156365,#156373,#156381, + #156389,#156397)); +#156211 = ORIENTED_EDGE('',*,*,#156212,.T.); +#156212 = EDGE_CURVE('',#156213,#156215,#156217,.T.); +#156213 = VERTEX_POINT('',#156214); +#156214 = CARTESIAN_POINT('',(153.257918,-107.624595,1.585)); +#156215 = VERTEX_POINT('',#156216); +#156216 = CARTESIAN_POINT('',(153.465777,-107.522253,1.585)); +#156217 = LINE('',#156218,#156219); +#156218 = CARTESIAN_POINT('',(153.257918,-107.624595,1.585)); +#156219 = VECTOR('',#156220,1.); +#156220 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#156221 = ORIENTED_EDGE('',*,*,#156222,.T.); +#156222 = EDGE_CURVE('',#156215,#156223,#156225,.T.); +#156223 = VERTEX_POINT('',#156224); +#156224 = CARTESIAN_POINT('',(153.498793,-107.517814,1.585)); +#156225 = LINE('',#156226,#156227); +#156226 = CARTESIAN_POINT('',(153.465777,-107.522253,1.585)); +#156227 = VECTOR('',#156228,1.); +#156228 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#156229 = ORIENTED_EDGE('',*,*,#156230,.T.); +#156230 = EDGE_CURVE('',#156223,#156231,#156233,.T.); +#156231 = VERTEX_POINT('',#156232); +#156232 = CARTESIAN_POINT('',(153.780322,-107.520216,1.585)); +#156233 = LINE('',#156234,#156235); +#156234 = CARTESIAN_POINT('',(153.498793,-107.517814,1.585)); +#156235 = VECTOR('',#156236,1.); +#156236 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#156237 = ORIENTED_EDGE('',*,*,#156238,.T.); +#156238 = EDGE_CURVE('',#156231,#156239,#156241,.T.); +#156239 = VERTEX_POINT('',#156240); +#156240 = CARTESIAN_POINT('',(153.811838,-107.531011,1.585)); +#156241 = LINE('',#156242,#156243); +#156242 = CARTESIAN_POINT('',(153.780322,-107.520216,1.585)); +#156243 = VECTOR('',#156244,1.); +#156244 = DIRECTION('',(0.946042469829,-0.324042659659,0.)); +#156245 = ORIENTED_EDGE('',*,*,#156246,.T.); +#156246 = EDGE_CURVE('',#156239,#156247,#156249,.T.); +#156247 = VERTEX_POINT('',#156248); +#156248 = CARTESIAN_POINT('',(154.004003,-107.629779,1.585)); +#156249 = LINE('',#156250,#156251); +#156250 = CARTESIAN_POINT('',(153.811838,-107.531011,1.585)); +#156251 = VECTOR('',#156252,1.); +#156252 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#156253 = ORIENTED_EDGE('',*,*,#156254,.T.); +#156254 = EDGE_CURVE('',#156247,#156255,#156257,.T.); +#156255 = VERTEX_POINT('',#156256); +#156256 = CARTESIAN_POINT('',(154.117012,-107.744795,1.585)); +#156257 = LINE('',#156258,#156259); +#156258 = CARTESIAN_POINT('',(154.004003,-107.629779,1.585)); +#156259 = VECTOR('',#156260,1.); +#156260 = DIRECTION('',(0.700855916236,-0.713302870229,0.)); +#156261 = ORIENTED_EDGE('',*,*,#156262,.T.); +#156262 = EDGE_CURVE('',#156255,#156263,#156265,.T.); +#156263 = VERTEX_POINT('',#156264); +#156264 = CARTESIAN_POINT('',(154.219354,-107.952655,1.585)); +#156265 = LINE('',#156266,#156267); +#156266 = CARTESIAN_POINT('',(154.117012,-107.744795,1.585)); +#156267 = VECTOR('',#156268,1.); +#156268 = DIRECTION('',(0.44172197285,-0.897151993088,0.)); +#156269 = ORIENTED_EDGE('',*,*,#156270,.T.); +#156270 = EDGE_CURVE('',#156263,#156271,#156273,.T.); +#156271 = VERTEX_POINT('',#156272); +#156272 = CARTESIAN_POINT('',(154.223793,-107.985671,1.585)); +#156273 = LINE('',#156274,#156275); +#156274 = CARTESIAN_POINT('',(154.219354,-107.952655,1.585)); +#156275 = VECTOR('',#156276,1.); +#156276 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#156277 = ORIENTED_EDGE('',*,*,#156278,.T.); +#156278 = EDGE_CURVE('',#156271,#156279,#156281,.T.); +#156279 = VERTEX_POINT('',#156280); +#156280 = CARTESIAN_POINT('',(154.221391,-108.524343,1.585)); +#156281 = LINE('',#156282,#156283); +#156282 = CARTESIAN_POINT('',(154.223793,-107.985671,1.585)); +#156283 = VECTOR('',#156284,1.); +#156284 = DIRECTION('',(-4.459069934991E-03,-0.999990058298,0.)); +#156285 = ORIENTED_EDGE('',*,*,#156286,.T.); +#156286 = EDGE_CURVE('',#156279,#156287,#156289,.T.); +#156287 = VERTEX_POINT('',#156288); +#156288 = CARTESIAN_POINT('',(154.210596,-108.555859,1.585)); +#156289 = LINE('',#156290,#156291); +#156290 = CARTESIAN_POINT('',(154.221391,-108.524343,1.585)); +#156291 = VECTOR('',#156292,1.); +#156292 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#156293 = ORIENTED_EDGE('',*,*,#156294,.T.); +#156294 = EDGE_CURVE('',#156287,#156295,#156297,.T.); +#156295 = VERTEX_POINT('',#156296); +#156296 = CARTESIAN_POINT('',(154.111828,-108.748024,1.585)); +#156297 = LINE('',#156298,#156299); +#156298 = CARTESIAN_POINT('',(154.210596,-108.555859,1.585)); +#156299 = VECTOR('',#156300,1.); +#156300 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#156301 = ORIENTED_EDGE('',*,*,#156302,.T.); +#156302 = EDGE_CURVE('',#156295,#156303,#156305,.T.); +#156303 = VERTEX_POINT('',#156304); +#156304 = CARTESIAN_POINT('',(153.99681,-108.861033,1.585)); +#156305 = LINE('',#156306,#156307); +#156306 = CARTESIAN_POINT('',(154.111828,-108.748024,1.585)); +#156307 = VECTOR('',#156308,1.); +#156308 = DIRECTION('',(-0.713308962756,-0.700849715454,0.)); +#156309 = ORIENTED_EDGE('',*,*,#156310,.T.); +#156310 = EDGE_CURVE('',#156303,#156311,#156313,.T.); +#156311 = VERTEX_POINT('',#156312); +#156312 = CARTESIAN_POINT('',(153.788952,-108.963375,1.585)); +#156313 = LINE('',#156314,#156315); +#156314 = CARTESIAN_POINT('',(153.99681,-108.861033,1.585)); +#156315 = VECTOR('',#156316,1.); +#156316 = DIRECTION('',(-0.897150308754,-0.441725393771,0.)); +#156317 = ORIENTED_EDGE('',*,*,#156318,.T.); +#156318 = EDGE_CURVE('',#156311,#156319,#156321,.T.); +#156319 = VERTEX_POINT('',#156320); +#156320 = CARTESIAN_POINT('',(153.755936,-108.967814,1.585)); +#156321 = LINE('',#156322,#156323); +#156322 = CARTESIAN_POINT('',(153.788952,-108.963375,1.585)); +#156323 = VECTOR('',#156324,1.); +#156324 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#156325 = ORIENTED_EDGE('',*,*,#156326,.T.); +#156326 = EDGE_CURVE('',#156319,#156327,#156329,.T.); +#156327 = VERTEX_POINT('',#156328); +#156328 = CARTESIAN_POINT('',(153.474407,-108.965412,1.585)); +#156329 = LINE('',#156330,#156331); +#156330 = CARTESIAN_POINT('',(153.755936,-108.967814,1.585)); +#156331 = VECTOR('',#156332,1.); +#156332 = DIRECTION('',(-0.99996360464,8.53167019507E-03,0.)); +#156333 = ORIENTED_EDGE('',*,*,#156334,.T.); +#156334 = EDGE_CURVE('',#156327,#156335,#156337,.T.); +#156335 = VERTEX_POINT('',#156336); +#156336 = CARTESIAN_POINT('',(153.442891,-108.954617,1.585)); +#156337 = LINE('',#156338,#156339); +#156338 = CARTESIAN_POINT('',(153.474407,-108.965412,1.585)); +#156339 = VECTOR('',#156340,1.); +#156340 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#156341 = ORIENTED_EDGE('',*,*,#156342,.T.); +#156342 = EDGE_CURVE('',#156335,#156343,#156345,.T.); +#156343 = VERTEX_POINT('',#156344); +#156344 = CARTESIAN_POINT('',(153.250725,-108.855849,1.585)); +#156345 = LINE('',#156346,#156347); +#156346 = CARTESIAN_POINT('',(153.442891,-108.954617,1.585)); +#156347 = VECTOR('',#156348,1.); +#156348 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#156349 = ORIENTED_EDGE('',*,*,#156350,.T.); +#156350 = EDGE_CURVE('',#156343,#156351,#156353,.T.); +#156351 = VERTEX_POINT('',#156352); +#156352 = CARTESIAN_POINT('',(153.137716,-108.740831,1.585)); +#156353 = LINE('',#156354,#156355); +#156354 = CARTESIAN_POINT('',(153.250725,-108.855849,1.585)); +#156355 = VECTOR('',#156356,1.); +#156356 = DIRECTION('',(-0.700849715454,0.713308962756,0.)); +#156357 = ORIENTED_EDGE('',*,*,#156358,.T.); +#156358 = EDGE_CURVE('',#156351,#156359,#156361,.T.); +#156359 = VERTEX_POINT('',#156360); +#156360 = CARTESIAN_POINT('',(153.035375,-108.532973,1.585)); +#156361 = LINE('',#156362,#156363); +#156362 = CARTESIAN_POINT('',(153.137716,-108.740831,1.585)); +#156363 = VECTOR('',#156364,1.); +#156364 = DIRECTION('',(-0.441721919769,0.897152019223,0.)); +#156365 = ORIENTED_EDGE('',*,*,#156366,.T.); +#156366 = EDGE_CURVE('',#156359,#156367,#156369,.T.); +#156367 = VERTEX_POINT('',#156368); +#156368 = CARTESIAN_POINT('',(153.030936,-108.499957,1.585)); +#156369 = LINE('',#156370,#156371); +#156370 = CARTESIAN_POINT('',(153.035375,-108.532973,1.585)); +#156371 = VECTOR('',#156372,1.); +#156372 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#156373 = ORIENTED_EDGE('',*,*,#156374,.T.); +#156374 = EDGE_CURVE('',#156367,#156375,#156377,.T.); +#156375 = VERTEX_POINT('',#156376); +#156376 = CARTESIAN_POINT('',(153.033338,-107.961285,1.585)); +#156377 = LINE('',#156378,#156379); +#156378 = CARTESIAN_POINT('',(153.030936,-108.499957,1.585)); +#156379 = VECTOR('',#156380,1.); +#156380 = DIRECTION('',(4.459069934992E-03,0.999990058298,0.)); +#156381 = ORIENTED_EDGE('',*,*,#156382,.T.); +#156382 = EDGE_CURVE('',#156375,#156383,#156385,.T.); +#156383 = VERTEX_POINT('',#156384); +#156384 = CARTESIAN_POINT('',(153.044132,-107.92977,1.585)); +#156385 = LINE('',#156386,#156387); +#156386 = CARTESIAN_POINT('',(153.033338,-107.961285,1.585)); +#156387 = VECTOR('',#156388,1.); +#156388 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#156389 = ORIENTED_EDGE('',*,*,#156390,.T.); +#156390 = EDGE_CURVE('',#156383,#156391,#156393,.T.); +#156391 = VERTEX_POINT('',#156392); +#156392 = CARTESIAN_POINT('',(153.1429,-107.737603,1.585)); +#156393 = LINE('',#156394,#156395); +#156394 = CARTESIAN_POINT('',(153.044132,-107.92977,1.585)); +#156395 = VECTOR('',#156396,1.); +#156396 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#156397 = ORIENTED_EDGE('',*,*,#156398,.T.); +#156398 = EDGE_CURVE('',#156391,#156213,#156399,.T.); +#156399 = LINE('',#156400,#156401); +#156400 = CARTESIAN_POINT('',(153.1429,-107.737603,1.585)); +#156401 = VECTOR('',#156402,1.); +#156402 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#156403 = FACE_BOUND('',#156404,.F.); +#156404 = EDGE_LOOP('',(#156405,#156416,#156424,#156433,#156441,#156450, + #156458,#156467)); +#156405 = ORIENTED_EDGE('',*,*,#156406,.T.); +#156406 = EDGE_CURVE('',#156407,#156409,#156411,.T.); +#156407 = VERTEX_POINT('',#156408); +#156408 = CARTESIAN_POINT('',(153.853318,-107.831259,1.585)); +#156409 = VERTEX_POINT('',#156410); +#156410 = CARTESIAN_POINT('',(153.401406,-107.831261,1.585)); +#156411 = CIRCLE('',#156412,0.370245484605); +#156412 = AXIS2_PLACEMENT_3D('',#156413,#156414,#156415); +#156413 = CARTESIAN_POINT('',(153.62736329804,-108.1245612187,1.585)); +#156414 = DIRECTION('',(0.,0.,1.)); +#156415 = DIRECTION('',(0.610283477718,0.792183108142,-0.)); +#156416 = ORIENTED_EDGE('',*,*,#156417,.T.); +#156417 = EDGE_CURVE('',#156409,#156418,#156420,.T.); +#156418 = VERTEX_POINT('',#156419); +#156419 = CARTESIAN_POINT('',(153.344382,-107.888285,1.585)); +#156420 = LINE('',#156421,#156422); +#156421 = CARTESIAN_POINT('',(153.401406,-107.831261,1.585)); +#156422 = VECTOR('',#156423,1.); +#156423 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#156424 = ORIENTED_EDGE('',*,*,#156425,.T.); +#156425 = EDGE_CURVE('',#156418,#156426,#156428,.T.); +#156426 = VERTEX_POINT('',#156427); +#156427 = CARTESIAN_POINT('',(153.344381,-108.597339,1.585)); +#156428 = CIRCLE('',#156429,0.654738608759); +#156429 = AXIS2_PLACEMENT_3D('',#156430,#156431,#156432); +#156430 = CARTESIAN_POINT('',(153.89482972832,-108.2428127763,1.585)); +#156431 = DIRECTION('',(0.,0.,1.)); +#156432 = DIRECTION('',(-0.840713715313,0.541479869326,0.)); +#156433 = ORIENTED_EDGE('',*,*,#156434,.T.); +#156434 = EDGE_CURVE('',#156426,#156435,#156437,.T.); +#156435 = VERTEX_POINT('',#156436); +#156436 = CARTESIAN_POINT('',(153.401409,-108.654368,1.585)); +#156437 = LINE('',#156438,#156439); +#156438 = CARTESIAN_POINT('',(153.344381,-108.597339,1.585)); +#156439 = VECTOR('',#156440,1.); +#156440 = DIRECTION('',(0.707100581568,-0.707112980751,0.)); +#156441 = ORIENTED_EDGE('',*,*,#156442,.T.); +#156442 = EDGE_CURVE('',#156435,#156443,#156445,.T.); +#156443 = VERTEX_POINT('',#156444); +#156444 = CARTESIAN_POINT('',(153.853319,-108.654368,1.585)); +#156445 = CIRCLE('',#156446,0.370241184817); +#156446 = AXIS2_PLACEMENT_3D('',#156447,#156448,#156449); +#156447 = CARTESIAN_POINT('',(153.627364,-108.3610714386,1.585)); +#156448 = DIRECTION('',(0.,0.,1.)); +#156449 = DIRECTION('',(-0.610291370236,-0.792177027826,0.)); +#156450 = ORIENTED_EDGE('',*,*,#156451,.T.); +#156451 = EDGE_CURVE('',#156443,#156452,#156454,.T.); +#156452 = VERTEX_POINT('',#156453); +#156453 = CARTESIAN_POINT('',(153.910347,-108.597339,1.585)); +#156454 = LINE('',#156455,#156456); +#156455 = CARTESIAN_POINT('',(153.853319,-108.654368,1.585)); +#156456 = VECTOR('',#156457,1.); +#156457 = DIRECTION('',(0.707100581568,0.707112980751,0.)); +#156458 = ORIENTED_EDGE('',*,*,#156459,.T.); +#156459 = EDGE_CURVE('',#156452,#156460,#156462,.T.); +#156460 = VERTEX_POINT('',#156461); +#156461 = CARTESIAN_POINT('',(153.910347,-107.888287,1.585)); +#156462 = CIRCLE('',#156463,0.654725611146); +#156463 = AXIS2_PLACEMENT_3D('',#156464,#156465,#156466); +#156464 = CARTESIAN_POINT('',(153.35991358784,-108.242813,1.585)); +#156465 = DIRECTION('',(0.,-0.,1.)); +#156466 = DIRECTION('',(0.840708539246,-0.541487905719,-0.)); +#156467 = ORIENTED_EDGE('',*,*,#156468,.T.); +#156468 = EDGE_CURVE('',#156460,#156407,#156469,.T.); +#156469 = LINE('',#156470,#156471); +#156470 = CARTESIAN_POINT('',(153.910347,-107.888287,1.585)); +#156471 = VECTOR('',#156472,1.); +#156472 = DIRECTION('',(-0.707112980751,0.707100581568,0.)); +#156473 = PLANE('',#156474); +#156474 = AXIS2_PLACEMENT_3D('',#156475,#156476,#156477); +#156475 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156476 = DIRECTION('',(0.,0.,1.)); +#156477 = DIRECTION('',(1.,0.,-0.)); +#156478 = SHELL_BASED_SURFACE_MODEL('',(#156479)); +#156479 = OPEN_SHELL('',(#156480)); +#156480 = ADVANCED_FACE('',(#156481,#156646),#156698,.T.); +#156481 = FACE_BOUND('',#156482,.F.); +#156482 = EDGE_LOOP('',(#156483,#156494,#156502,#156510,#156518,#156526, + #156534,#156542,#156550,#156558,#156566,#156574,#156582,#156590, + #156598,#156607,#156615,#156623,#156631,#156640)); +#156483 = ORIENTED_EDGE('',*,*,#156484,.T.); +#156484 = EDGE_CURVE('',#156485,#156487,#156489,.T.); +#156485 = VERTEX_POINT('',#156486); +#156486 = CARTESIAN_POINT('',(140.347622,-107.018428,1.585)); +#156487 = VERTEX_POINT('',#156488); +#156488 = CARTESIAN_POINT('',(140.445834,-106.920216,1.585)); +#156489 = CIRCLE('',#156490,0.124998078635); +#156490 = AXIS2_PLACEMENT_3D('',#156491,#156492,#156493); +#156491 = CARTESIAN_POINT('',(140.47021854765,-107.0428125476,1.585)); +#156492 = DIRECTION('',(0.,0.,-1.)); +#156493 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#156494 = ORIENTED_EDGE('',*,*,#156495,.T.); +#156495 = EDGE_CURVE('',#156487,#156496,#156498,.T.); +#156496 = VERTEX_POINT('',#156497); +#156497 = CARTESIAN_POINT('',(141.18032,-106.920216,1.585)); +#156498 = LINE('',#156499,#156500); +#156499 = CARTESIAN_POINT('',(140.445834,-106.920216,1.585)); +#156500 = VECTOR('',#156501,1.); +#156501 = DIRECTION('',(1.,0.,0.)); +#156502 = ORIENTED_EDGE('',*,*,#156503,.T.); +#156503 = EDGE_CURVE('',#156496,#156504,#156506,.T.); +#156504 = VERTEX_POINT('',#156505); +#156505 = CARTESIAN_POINT('',(141.211835,-106.93101,1.585)); +#156506 = LINE('',#156507,#156508); +#156507 = CARTESIAN_POINT('',(141.18032,-106.920216,1.585)); +#156508 = VECTOR('',#156509,1.); +#156509 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#156510 = ORIENTED_EDGE('',*,*,#156511,.T.); +#156511 = EDGE_CURVE('',#156504,#156512,#156514,.T.); +#156512 = VERTEX_POINT('',#156513); +#156513 = CARTESIAN_POINT('',(141.404002,-107.029778,1.585)); +#156514 = LINE('',#156515,#156516); +#156515 = CARTESIAN_POINT('',(141.211835,-106.93101,1.585)); +#156516 = VECTOR('',#156517,1.); +#156517 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#156518 = ORIENTED_EDGE('',*,*,#156519,.T.); +#156519 = EDGE_CURVE('',#156512,#156520,#156522,.T.); +#156520 = VERTEX_POINT('',#156521); +#156521 = CARTESIAN_POINT('',(141.51701,-107.144796,1.585)); +#156522 = LINE('',#156523,#156524); +#156523 = CARTESIAN_POINT('',(141.404002,-107.029778,1.585)); +#156524 = VECTOR('',#156525,1.); +#156525 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#156526 = ORIENTED_EDGE('',*,*,#156527,.T.); +#156527 = EDGE_CURVE('',#156520,#156528,#156530,.T.); +#156528 = VERTEX_POINT('',#156529); +#156529 = CARTESIAN_POINT('',(141.619352,-107.352655,1.585)); +#156530 = LINE('',#156531,#156532); +#156531 = CARTESIAN_POINT('',(141.51701,-107.144796,1.585)); +#156532 = VECTOR('',#156533,1.); +#156533 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#156534 = ORIENTED_EDGE('',*,*,#156535,.T.); +#156535 = EDGE_CURVE('',#156528,#156536,#156538,.T.); +#156536 = VERTEX_POINT('',#156537); +#156537 = CARTESIAN_POINT('',(141.623791,-107.385671,1.585)); +#156538 = LINE('',#156539,#156540); +#156539 = CARTESIAN_POINT('',(141.619352,-107.352655,1.585)); +#156540 = VECTOR('',#156541,1.); +#156541 = DIRECTION('',(0.133250982623,-0.991082325355,0.)); +#156542 = ORIENTED_EDGE('',*,*,#156543,.T.); +#156543 = EDGE_CURVE('',#156536,#156544,#156546,.T.); +#156544 = VERTEX_POINT('',#156545); +#156545 = CARTESIAN_POINT('',(141.621389,-107.6672,1.585)); +#156546 = LINE('',#156547,#156548); +#156547 = CARTESIAN_POINT('',(141.623791,-107.385671,1.585)); +#156548 = VECTOR('',#156549,1.); +#156549 = DIRECTION('',(-8.53167019512E-03,-0.99996360464,0.)); +#156550 = ORIENTED_EDGE('',*,*,#156551,.T.); +#156551 = EDGE_CURVE('',#156544,#156552,#156554,.T.); +#156552 = VERTEX_POINT('',#156553); +#156553 = CARTESIAN_POINT('',(141.610594,-107.698716,1.585)); +#156554 = LINE('',#156555,#156556); +#156555 = CARTESIAN_POINT('',(141.621389,-107.6672,1.585)); +#156556 = VECTOR('',#156557,1.); +#156557 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#156558 = ORIENTED_EDGE('',*,*,#156559,.T.); +#156559 = EDGE_CURVE('',#156552,#156560,#156562,.T.); +#156560 = VERTEX_POINT('',#156561); +#156561 = CARTESIAN_POINT('',(141.511826,-107.890881,1.585)); +#156562 = LINE('',#156563,#156564); +#156563 = CARTESIAN_POINT('',(141.610594,-107.698716,1.585)); +#156564 = VECTOR('',#156565,1.); +#156565 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#156566 = ORIENTED_EDGE('',*,*,#156567,.T.); +#156567 = EDGE_CURVE('',#156560,#156568,#156570,.T.); +#156568 = VERTEX_POINT('',#156569); +#156569 = CARTESIAN_POINT('',(141.39681,-108.00389,1.585)); +#156570 = LINE('',#156571,#156572); +#156571 = CARTESIAN_POINT('',(141.511826,-107.890881,1.585)); +#156572 = VECTOR('',#156573,1.); +#156573 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#156574 = ORIENTED_EDGE('',*,*,#156575,.T.); +#156575 = EDGE_CURVE('',#156568,#156576,#156578,.T.); +#156576 = VERTEX_POINT('',#156577); +#156577 = CARTESIAN_POINT('',(141.18895,-108.106232,1.585)); +#156578 = LINE('',#156579,#156580); +#156579 = CARTESIAN_POINT('',(141.39681,-108.00389,1.585)); +#156580 = VECTOR('',#156581,1.); +#156581 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#156582 = ORIENTED_EDGE('',*,*,#156583,.T.); +#156583 = EDGE_CURVE('',#156576,#156584,#156586,.T.); +#156584 = VERTEX_POINT('',#156585); +#156585 = CARTESIAN_POINT('',(141.138873,-108.110671,1.585)); +#156586 = LINE('',#156587,#156588); +#156587 = CARTESIAN_POINT('',(141.18895,-108.106232,1.585)); +#156588 = VECTOR('',#156589,1.); +#156589 = DIRECTION('',(-0.996094168956,-8.829726253542E-02,0.)); +#156590 = ORIENTED_EDGE('',*,*,#156591,.T.); +#156591 = EDGE_CURVE('',#156584,#156592,#156594,.T.); +#156592 = VERTEX_POINT('',#156593); +#156593 = CARTESIAN_POINT('',(141.613211,-108.792486,1.585)); +#156594 = LINE('',#156595,#156596); +#156595 = CARTESIAN_POINT('',(141.138873,-108.110671,1.585)); +#156596 = VECTOR('',#156597,1.); +#156597 = DIRECTION('',(0.571090380246,-0.82088718932,0.)); +#156598 = ORIENTED_EDGE('',*,*,#156599,.T.); +#156599 = EDGE_CURVE('',#156592,#156600,#156602,.T.); +#156600 = VERTEX_POINT('',#156601); +#156601 = CARTESIAN_POINT('',(141.412339,-108.933097,1.585)); +#156602 = CIRCLE('',#156603,0.124999722409); +#156603 = AXIS2_PLACEMENT_3D('',#156604,#156605,#156606); +#156604 = CARTESIAN_POINT('',(141.4987905051,-108.8428137353,1.585)); +#156605 = DIRECTION('',(0.,0.,-1.)); +#156606 = DIRECTION('',(0.915365991948,0.402622777281,0.)); +#156607 = ORIENTED_EDGE('',*,*,#156608,.T.); +#156608 = EDGE_CURVE('',#156600,#156609,#156611,.T.); +#156609 = VERTEX_POINT('',#156610); +#156610 = CARTESIAN_POINT('',(140.833709,-108.110671,1.585)); +#156611 = LINE('',#156612,#156613); +#156612 = CARTESIAN_POINT('',(141.412339,-108.933097,1.585)); +#156613 = VECTOR('',#156614,1.); +#156614 = DIRECTION('',(-0.575417435165,0.817859875106,0.)); +#156615 = ORIENTED_EDGE('',*,*,#156616,.T.); +#156616 = EDGE_CURVE('',#156609,#156617,#156619,.T.); +#156617 = VERTEX_POINT('',#156618); +#156618 = CARTESIAN_POINT('',(140.59522,-108.110671,1.585)); +#156619 = LINE('',#156620,#156621); +#156620 = CARTESIAN_POINT('',(140.833709,-108.110671,1.585)); +#156621 = VECTOR('',#156622,1.); +#156622 = DIRECTION('',(-1.,0.,0.)); +#156623 = ORIENTED_EDGE('',*,*,#156624,.T.); +#156624 = EDGE_CURVE('',#156617,#156625,#156627,.T.); +#156625 = VERTEX_POINT('',#156626); +#156626 = CARTESIAN_POINT('',(140.592818,-108.8672,1.585)); +#156627 = LINE('',#156628,#156629); +#156628 = CARTESIAN_POINT('',(140.59522,-108.110671,1.585)); +#156629 = VECTOR('',#156630,1.); +#156630 = DIRECTION('',(-3.175010995048E-03,-0.99999495964,0.)); +#156631 = ORIENTED_EDGE('',*,*,#156632,.T.); +#156632 = EDGE_CURVE('',#156625,#156633,#156635,.T.); +#156633 = VERTEX_POINT('',#156634); +#156634 = CARTESIAN_POINT('',(140.347622,-108.8672,1.585)); +#156635 = CIRCLE('',#156636,0.1249997864); +#156636 = AXIS2_PLACEMENT_3D('',#156637,#156638,#156639); +#156637 = CARTESIAN_POINT('',(140.47022,-108.842814,1.585)); +#156638 = DIRECTION('',(-0.,0.,-1.)); +#156639 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#156640 = ORIENTED_EDGE('',*,*,#156641,.T.); +#156641 = EDGE_CURVE('',#156633,#156485,#156642,.T.); +#156642 = LINE('',#156643,#156644); +#156643 = CARTESIAN_POINT('',(140.347622,-108.8672,1.585)); +#156644 = VECTOR('',#156645,1.); +#156645 = DIRECTION('',(0.,1.,0.)); +#156646 = FACE_BOUND('',#156647,.F.); +#156647 = EDGE_LOOP('',(#156648,#156659,#156667,#156675,#156683,#156692) + ); +#156648 = ORIENTED_EDGE('',*,*,#156649,.T.); +#156649 = EDGE_CURVE('',#156650,#156652,#156654,.T.); +#156650 = VERTEX_POINT('',#156651); +#156651 = CARTESIAN_POINT('',(141.373791,-107.415179,1.585)); +#156652 = VERTEX_POINT('',#156653); +#156653 = CARTESIAN_POINT('',(141.126425,-107.167814,1.585)); +#156654 = CIRCLE('',#156655,0.347631916063); +#156655 = AXIS2_PLACEMENT_3D('',#156656,#156657,#156658); +#156656 = CARTESIAN_POINT('',(141.03767831879,-107.5039270399,1.585)); +#156657 = DIRECTION('',(0.,0.,1.)); +#156658 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#156659 = ORIENTED_EDGE('',*,*,#156660,.T.); +#156660 = EDGE_CURVE('',#156652,#156661,#156663,.T.); +#156661 = VERTEX_POINT('',#156662); +#156662 = CARTESIAN_POINT('',(140.59522,-107.167814,1.585)); +#156663 = LINE('',#156664,#156665); +#156664 = CARTESIAN_POINT('',(141.126425,-107.167814,1.585)); +#156665 = VECTOR('',#156666,1.); +#156666 = DIRECTION('',(-1.,0.,0.)); +#156667 = ORIENTED_EDGE('',*,*,#156668,.T.); +#156668 = EDGE_CURVE('',#156661,#156669,#156671,.T.); +#156669 = VERTEX_POINT('',#156670); +#156670 = CARTESIAN_POINT('',(140.59522,-107.860671,1.585)); +#156671 = LINE('',#156672,#156673); +#156672 = CARTESIAN_POINT('',(140.59522,-107.167814,1.585)); +#156673 = VECTOR('',#156674,1.); +#156674 = DIRECTION('',(0.,-1.,0.)); +#156675 = ORIENTED_EDGE('',*,*,#156676,.T.); +#156676 = EDGE_CURVE('',#156669,#156677,#156679,.T.); +#156677 = VERTEX_POINT('',#156678); +#156678 = CARTESIAN_POINT('',(141.126425,-107.860671,1.585)); +#156679 = LINE('',#156680,#156681); +#156680 = CARTESIAN_POINT('',(140.59522,-107.860671,1.585)); +#156681 = VECTOR('',#156682,1.); +#156682 = DIRECTION('',(1.,0.,0.)); +#156683 = ORIENTED_EDGE('',*,*,#156684,.T.); +#156684 = EDGE_CURVE('',#156677,#156685,#156687,.T.); +#156685 = VERTEX_POINT('',#156686); +#156686 = CARTESIAN_POINT('',(141.373791,-107.613305,1.585)); +#156687 = CIRCLE('',#156688,0.347641001424); +#156688 = AXIS2_PLACEMENT_3D('',#156689,#156690,#156691); +#156689 = CARTESIAN_POINT('',(141.03767060111,-107.5245506011,1.585)); +#156690 = DIRECTION('',(0.,0.,1.)); +#156691 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#156692 = ORIENTED_EDGE('',*,*,#156693,.T.); +#156693 = EDGE_CURVE('',#156685,#156650,#156694,.T.); +#156694 = LINE('',#156695,#156696); +#156695 = CARTESIAN_POINT('',(141.373791,-107.613305,1.585)); +#156696 = VECTOR('',#156697,1.); +#156697 = DIRECTION('',(0.,1.,0.)); +#156698 = PLANE('',#156699); +#156699 = AXIS2_PLACEMENT_3D('',#156700,#156701,#156702); +#156700 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156701 = DIRECTION('',(0.,0.,1.)); +#156702 = DIRECTION('',(1.,0.,-0.)); +#156703 = SHELL_BASED_SURFACE_MODEL('',(#156704)); +#156704 = OPEN_SHELL('',(#156705)); +#156705 = ADVANCED_FACE('',(#156706),#156824,.T.); +#156706 = FACE_BOUND('',#156707,.F.); +#156707 = EDGE_LOOP('',(#156708,#156719,#156727,#156735,#156744,#156752, + #156760,#156769,#156777,#156785,#156793,#156802,#156810,#156818)); +#156708 = ORIENTED_EDGE('',*,*,#156709,.T.); +#156709 = EDGE_CURVE('',#156710,#156712,#156714,.T.); +#156710 = VERTEX_POINT('',#156711); +#156711 = CARTESIAN_POINT('',(143.572203,-106.93888,1.585)); +#156712 = VERTEX_POINT('',#156713); +#156713 = CARTESIAN_POINT('',(143.764247,-107.018428,1.585)); +#156714 = CIRCLE('',#156715,0.124999692383); +#156715 = AXIS2_PLACEMENT_3D('',#156716,#156717,#156718); +#156716 = CARTESIAN_POINT('',(143.641649,-107.042813518,1.585)); +#156717 = DIRECTION('',(0.,0.,-1.)); +#156718 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#156719 = ORIENTED_EDGE('',*,*,#156720,.T.); +#156720 = EDGE_CURVE('',#156712,#156721,#156723,.T.); +#156721 = VERTEX_POINT('',#156722); +#156722 = CARTESIAN_POINT('',(143.766649,-107.769609,1.585)); +#156723 = LINE('',#156724,#156725); +#156724 = CARTESIAN_POINT('',(143.764247,-107.018428,1.585)); +#156725 = VECTOR('',#156726,1.); +#156726 = DIRECTION('',(3.197615115455E-03,-0.999994887616,0.)); +#156727 = ORIENTED_EDGE('',*,*,#156728,.T.); +#156728 = EDGE_CURVE('',#156721,#156729,#156731,.T.); +#156729 = VERTEX_POINT('',#156730); +#156730 = CARTESIAN_POINT('',(144.600774,-106.938881,1.585)); +#156731 = LINE('',#156732,#156733); +#156732 = CARTESIAN_POINT('',(143.766649,-107.769609,1.585)); +#156733 = VECTOR('',#156734,1.); +#156734 = DIRECTION('',(0.708548101325,0.705662517149,0.)); +#156735 = ORIENTED_EDGE('',*,*,#156736,.T.); +#156736 = EDGE_CURVE('',#156729,#156737,#156739,.T.); +#156737 = VERTEX_POINT('',#156738); +#156738 = CARTESIAN_POINT('',(144.774153,-107.11226,1.585)); +#156739 = CIRCLE('',#156740,0.124999261618); +#156740 = AXIS2_PLACEMENT_3D('',#156741,#156742,#156743); +#156741 = CARTESIAN_POINT('',(144.67022,-107.042814,1.585)); +#156742 = DIRECTION('',(0.,0.,-1.)); +#156743 = DIRECTION('',(-0.555571281791,0.831468911535,0.)); +#156744 = ORIENTED_EDGE('',*,*,#156745,.T.); +#156745 = EDGE_CURVE('',#156737,#156746,#156748,.T.); +#156746 = VERTEX_POINT('',#156747); +#156747 = CARTESIAN_POINT('',(144.063838,-107.825971,1.585)); +#156748 = LINE('',#156749,#156750); +#156749 = CARTESIAN_POINT('',(144.774153,-107.11226,1.585)); +#156750 = VECTOR('',#156751,1.); +#156751 = DIRECTION('',(-0.705418475548,-0.708791065375,0.)); +#156752 = ORIENTED_EDGE('',*,*,#156753,.T.); +#156753 = EDGE_CURVE('',#156746,#156754,#156756,.T.); +#156754 = VERTEX_POINT('',#156755); +#156755 = CARTESIAN_POINT('',(144.78293,-108.788764,1.585)); +#156756 = LINE('',#156757,#156758); +#156757 = CARTESIAN_POINT('',(144.063838,-107.825971,1.585)); +#156758 = VECTOR('',#156759,1.); +#156759 = DIRECTION('',(0.598399589404,-0.801197810407,0.)); +#156760 = ORIENTED_EDGE('',*,*,#156761,.T.); +#156761 = EDGE_CURVE('',#156754,#156762,#156764,.T.); +#156762 = VERTEX_POINT('',#156763); +#156763 = CARTESIAN_POINT('',(144.586773,-108.935881,1.585)); +#156764 = CIRCLE('',#156765,0.124999676414); +#156765 = AXIS2_PLACEMENT_3D('',#156766,#156767,#156768); +#156766 = CARTESIAN_POINT('',(144.67021998436,-108.842813713,1.585)); +#156767 = DIRECTION('',(0.,0.,-1.)); +#156768 = DIRECTION('',(0.901682459294,0.432398823544,0.)); +#156769 = ORIENTED_EDGE('',*,*,#156770,.T.); +#156770 = EDGE_CURVE('',#156762,#156771,#156773,.T.); +#156771 = VERTEX_POINT('',#156772); +#156772 = CARTESIAN_POINT('',(143.885267,-108.004542,1.585)); +#156773 = LINE('',#156774,#156775); +#156774 = CARTESIAN_POINT('',(144.586773,-108.935881,1.585)); +#156775 = VECTOR('',#156776,1.); +#156776 = DIRECTION('',(-0.601646375358,0.798762567362,0.)); +#156777 = ORIENTED_EDGE('',*,*,#156778,.T.); +#156778 = EDGE_CURVE('',#156771,#156779,#156781,.T.); +#156779 = VERTEX_POINT('',#156780); +#156780 = CARTESIAN_POINT('',(143.766649,-108.123161,1.585)); +#156781 = LINE('',#156782,#156783); +#156782 = CARTESIAN_POINT('',(143.885267,-108.004542,1.585)); +#156783 = VECTOR('',#156784,1.); +#156784 = DIRECTION('',(-0.707103800588,-0.707109761773,0.)); +#156785 = ORIENTED_EDGE('',*,*,#156786,.T.); +#156786 = EDGE_CURVE('',#156779,#156787,#156789,.T.); +#156787 = VERTEX_POINT('',#156788); +#156788 = CARTESIAN_POINT('',(143.764247,-108.8672,1.585)); +#156789 = LINE('',#156790,#156791); +#156790 = CARTESIAN_POINT('',(143.766649,-108.123161,1.585)); +#156791 = VECTOR('',#156792,1.); +#156792 = DIRECTION('',(-3.228308574098E-03,-0.999994788998,0.)); +#156793 = ORIENTED_EDGE('',*,*,#156794,.T.); +#156794 = EDGE_CURVE('',#156787,#156795,#156797,.T.); +#156795 = VERTEX_POINT('',#156796); +#156796 = CARTESIAN_POINT('',(143.519051,-108.8672,1.585)); +#156797 = CIRCLE('',#156798,0.1249997864); +#156798 = AXIS2_PLACEMENT_3D('',#156799,#156800,#156801); +#156799 = CARTESIAN_POINT('',(143.641649,-108.842814,1.585)); +#156800 = DIRECTION('',(-0.,0.,-1.)); +#156801 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#156802 = ORIENTED_EDGE('',*,*,#156803,.T.); +#156803 = EDGE_CURVE('',#156795,#156804,#156806,.T.); +#156804 = VERTEX_POINT('',#156805); +#156805 = CARTESIAN_POINT('',(143.519051,-107.018428,1.585)); +#156806 = LINE('',#156807,#156808); +#156807 = CARTESIAN_POINT('',(143.519051,-108.8672,1.585)); +#156808 = VECTOR('',#156809,1.); +#156809 = DIRECTION('',(0.,1.,0.)); +#156810 = ORIENTED_EDGE('',*,*,#156811,.T.); +#156811 = EDGE_CURVE('',#156804,#156812,#156814,.T.); +#156812 = VERTEX_POINT('',#156813); +#156813 = CARTESIAN_POINT('',(143.537715,-106.973368,1.585)); +#156814 = LINE('',#156815,#156816); +#156815 = CARTESIAN_POINT('',(143.519051,-107.018428,1.585)); +#156816 = VECTOR('',#156817,1.); +#156817 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#156818 = ORIENTED_EDGE('',*,*,#156819,.T.); +#156819 = EDGE_CURVE('',#156812,#156710,#156820,.T.); +#156820 = LINE('',#156821,#156822); +#156821 = CARTESIAN_POINT('',(143.537715,-106.973368,1.585)); +#156822 = VECTOR('',#156823,1.); +#156823 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#156824 = PLANE('',#156825); +#156825 = AXIS2_PLACEMENT_3D('',#156826,#156827,#156828); +#156826 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156827 = DIRECTION('',(0.,0.,1.)); +#156828 = DIRECTION('',(1.,0.,-0.)); +#156829 = SHELL_BASED_SURFACE_MODEL('',(#156830)); +#156830 = OPEN_SHELL('',(#156831)); +#156831 = ADVANCED_FACE('',(#156832,#156933),#156959,.T.); +#156832 = FACE_BOUND('',#156833,.F.); +#156833 = EDGE_LOOP('',(#156834,#156845,#156853,#156861,#156869,#156877, + #156885,#156894,#156902,#156910,#156918,#156927)); +#156834 = ORIENTED_EDGE('',*,*,#156835,.T.); +#156835 = EDGE_CURVE('',#156836,#156838,#156840,.T.); +#156836 = VERTEX_POINT('',#156837); +#156837 = CARTESIAN_POINT('',(115.504483,-106.98091,1.585)); +#156838 = VERTEX_POINT('',#156839); +#156839 = CARTESIAN_POINT('',(115.628712,-106.918795,1.585)); +#156840 = CIRCLE('',#156841,0.124999669127); +#156841 = AXIS2_PLACEMENT_3D('',#156842,#156843,#156844); +#156842 = CARTESIAN_POINT('',(115.6130781992,-107.0428131501,1.585)); +#156843 = DIRECTION('',(0.,0.,-1.)); +#156844 = DIRECTION('',(-0.868763893211,0.495226511663,0.)); +#156845 = ORIENTED_EDGE('',*,*,#156846,.T.); +#156846 = EDGE_CURVE('',#156838,#156847,#156849,.T.); +#156847 = VERTEX_POINT('',#156848); +#156848 = CARTESIAN_POINT('',(115.637187,-106.92162,1.585)); +#156849 = LINE('',#156850,#156851); +#156850 = CARTESIAN_POINT('',(115.628712,-106.918795,1.585)); +#156851 = VECTOR('',#156852,1.); +#156852 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#156853 = ORIENTED_EDGE('',*,*,#156854,.T.); +#156854 = EDGE_CURVE('',#156847,#156855,#156857,.T.); +#156855 = VERTEX_POINT('',#156856); +#156856 = CARTESIAN_POINT('',(115.681731,-106.940071,1.585)); +#156857 = LINE('',#156858,#156859); +#156858 = CARTESIAN_POINT('',(115.637187,-106.92162,1.585)); +#156859 = VECTOR('',#156860,1.); +#156860 = DIRECTION('',(0.923877544693,-0.382688231347,0.)); +#156861 = ORIENTED_EDGE('',*,*,#156862,.T.); +#156862 = EDGE_CURVE('',#156855,#156863,#156865,.T.); +#156863 = VERTEX_POINT('',#156864); +#156864 = CARTESIAN_POINT('',(115.715822,-106.974165,1.585)); +#156865 = LINE('',#156866,#156867); +#156866 = CARTESIAN_POINT('',(115.681731,-106.940071,1.585)); +#156867 = VECTOR('',#156868,1.); +#156868 = DIRECTION('',(0.707075669256,-0.707137891749,0.)); +#156869 = ORIENTED_EDGE('',*,*,#156870,.T.); +#156870 = EDGE_CURVE('',#156863,#156871,#156873,.T.); +#156871 = VERTEX_POINT('',#156872); +#156872 = CARTESIAN_POINT('',(115.731663,-107.003286,1.585)); +#156873 = LINE('',#156874,#156875); +#156874 = CARTESIAN_POINT('',(115.715822,-106.974165,1.585)); +#156875 = VECTOR('',#156876,1.); +#156876 = DIRECTION('',(0.477847909994,-0.878442584871,0.)); +#156877 = ORIENTED_EDGE('',*,*,#156878,.T.); +#156878 = EDGE_CURVE('',#156871,#156879,#156881,.T.); +#156879 = VERTEX_POINT('',#156880); +#156880 = CARTESIAN_POINT('',(116.337096,-108.82718,1.585)); +#156881 = LINE('',#156882,#156883); +#156882 = CARTESIAN_POINT('',(115.731663,-107.003286,1.585)); +#156883 = VECTOR('',#156884,1.); +#156884 = DIRECTION('',(0.315041883433,-0.949077769038,0.)); +#156885 = ORIENTED_EDGE('',*,*,#156886,.T.); +#156886 = EDGE_CURVE('',#156879,#156887,#156889,.T.); +#156887 = VERTEX_POINT('',#156888); +#156888 = CARTESIAN_POINT('',(116.104483,-108.904718,1.585)); +#156889 = CIRCLE('',#156890,0.124999459985); +#156890 = AXIS2_PLACEMENT_3D('',#156891,#156892,#156893); +#156891 = CARTESIAN_POINT('',(116.21307825953,-108.842815378,1.585)); +#156892 = DIRECTION('',(0.,0.,-1.)); +#156893 = DIRECTION('',(0.992146209888,0.12508356489,0.)); +#156894 = ORIENTED_EDGE('',*,*,#156895,.T.); +#156895 = EDGE_CURVE('',#156887,#156896,#156898,.T.); +#156896 = VERTEX_POINT('',#156897); +#156897 = CARTESIAN_POINT('',(115.951555,-108.453528,1.585)); +#156898 = LINE('',#156899,#156900); +#156899 = CARTESIAN_POINT('',(116.104483,-108.904718,1.585)); +#156900 = VECTOR('',#156901,1.); +#156901 = DIRECTION('',(-0.321005838701,0.947077215184,0.)); +#156902 = ORIENTED_EDGE('',*,*,#156903,.T.); +#156903 = EDGE_CURVE('',#156896,#156904,#156906,.T.); +#156904 = VERTEX_POINT('',#156905); +#156905 = CARTESIAN_POINT('',(115.274601,-108.453528,1.585)); +#156906 = LINE('',#156907,#156908); +#156907 = CARTESIAN_POINT('',(115.951555,-108.453528,1.585)); +#156908 = VECTOR('',#156909,1.); +#156909 = DIRECTION('',(-1.,0.,0.)); +#156910 = ORIENTED_EDGE('',*,*,#156911,.T.); +#156911 = EDGE_CURVE('',#156904,#156912,#156914,.T.); +#156912 = VERTEX_POINT('',#156913); +#156913 = CARTESIAN_POINT('',(115.121673,-108.904717,1.585)); +#156914 = LINE('',#156915,#156916); +#156915 = CARTESIAN_POINT('',(115.274601,-108.453528,1.585)); +#156916 = VECTOR('',#156917,1.); +#156917 = DIRECTION('',(-0.321006476855,-0.947076998885,0.)); +#156918 = ORIENTED_EDGE('',*,*,#156919,.T.); +#156919 = EDGE_CURVE('',#156912,#156920,#156922,.T.); +#156920 = VERTEX_POINT('',#156921); +#156921 = CARTESIAN_POINT('',(114.88906,-108.82718,1.585)); +#156922 = CIRCLE('',#156923,0.124999465062); +#156923 = AXIS2_PLACEMENT_3D('',#156924,#156925,#156926); +#156924 = CARTESIAN_POINT('',(115.01307791055,-108.8428140694,1.585)); +#156925 = DIRECTION('',(-0.,0.,-1.)); +#156926 = DIRECTION('',(0.868764433415,-0.495225563995,-0.)); +#156927 = ORIENTED_EDGE('',*,*,#156928,.T.); +#156928 = EDGE_CURVE('',#156920,#156836,#156929,.T.); +#156929 = LINE('',#156930,#156931); +#156930 = CARTESIAN_POINT('',(114.88906,-108.82718,1.585)); +#156931 = VECTOR('',#156932,1.); +#156932 = DIRECTION('',(0.316227611865,0.948683349434,0.)); +#156933 = FACE_BOUND('',#156934,.F.); +#156934 = EDGE_LOOP('',(#156935,#156945,#156953)); +#156935 = ORIENTED_EDGE('',*,*,#156936,.T.); +#156936 = EDGE_CURVE('',#156937,#156939,#156941,.T.); +#156937 = VERTEX_POINT('',#156938); +#156938 = CARTESIAN_POINT('',(115.357935,-108.203528,1.585)); +#156939 = VERTEX_POINT('',#156940); +#156940 = CARTESIAN_POINT('',(115.868221,-108.203528,1.585)); +#156941 = LINE('',#156942,#156943); +#156942 = CARTESIAN_POINT('',(115.357935,-108.203528,1.585)); +#156943 = VECTOR('',#156944,1.); +#156944 = DIRECTION('',(1.,0.,0.)); +#156945 = ORIENTED_EDGE('',*,*,#156946,.T.); +#156946 = EDGE_CURVE('',#156939,#156947,#156949,.T.); +#156947 = VERTEX_POINT('',#156948); +#156948 = CARTESIAN_POINT('',(115.613078,-107.438098,1.585)); +#156949 = LINE('',#156950,#156951); +#156950 = CARTESIAN_POINT('',(115.868221,-108.203528,1.585)); +#156951 = VECTOR('',#156952,1.); +#156952 = DIRECTION('',(-0.316227394193,0.948683421992,0.)); +#156953 = ORIENTED_EDGE('',*,*,#156954,.T.); +#156954 = EDGE_CURVE('',#156947,#156937,#156955,.T.); +#156955 = LINE('',#156956,#156957); +#156956 = CARTESIAN_POINT('',(115.613078,-107.438098,1.585)); +#156957 = VECTOR('',#156958,1.); +#156958 = DIRECTION('',(-0.316227394193,-0.948683421992,0.)); +#156959 = PLANE('',#156960); +#156960 = AXIS2_PLACEMENT_3D('',#156961,#156962,#156963); +#156961 = CARTESIAN_POINT('',(0.,0.,1.585)); +#156962 = DIRECTION('',(0.,0.,1.)); +#156963 = DIRECTION('',(1.,0.,-0.)); +#156964 = SHELL_BASED_SURFACE_MODEL('',(#156965)); +#156965 = OPEN_SHELL('',(#156966)); +#156966 = ADVANCED_FACE('',(#156967),#157067,.T.); +#156967 = FACE_BOUND('',#156968,.F.); +#156968 = EDGE_LOOP('',(#156969,#156980,#156988,#156996,#157004,#157013, + #157021,#157029,#157037,#157045,#157053,#157061)); +#156969 = ORIENTED_EDGE('',*,*,#156970,.T.); +#156970 = EDGE_CURVE('',#156971,#156973,#156975,.T.); +#156971 = VERTEX_POINT('',#156972); +#156972 = CARTESIAN_POINT('',(127.71506,-106.93888,1.585)); +#156973 = VERTEX_POINT('',#156974); +#156974 = CARTESIAN_POINT('',(127.907104,-107.018428,1.585)); +#156975 = CIRCLE('',#156976,0.124999692383); +#156976 = AXIS2_PLACEMENT_3D('',#156977,#156978,#156979); +#156977 = CARTESIAN_POINT('',(127.784506,-107.042813518,1.585)); +#156978 = DIRECTION('',(0.,0.,-1.)); +#156979 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#156980 = ORIENTED_EDGE('',*,*,#156981,.T.); +#156981 = EDGE_CURVE('',#156973,#156982,#156984,.T.); +#156982 = VERTEX_POINT('',#156983); +#156983 = CARTESIAN_POINT('',(127.909506,-108.556162,1.585)); +#156984 = LINE('',#156985,#156986); +#156985 = CARTESIAN_POINT('',(127.907104,-107.018428,1.585)); +#156986 = VECTOR('',#156987,1.); +#156987 = DIRECTION('',(1.562036782432E-03,-0.99999878002,0.)); +#156988 = ORIENTED_EDGE('',*,*,#156989,.T.); +#156989 = EDGE_CURVE('',#156982,#156990,#156992,.T.); +#156990 = VERTEX_POINT('',#156991); +#156991 = CARTESIAN_POINT('',(127.963389,-108.66393,1.585)); +#156992 = LINE('',#156993,#156994); +#156993 = CARTESIAN_POINT('',(127.909506,-108.556162,1.585)); +#156994 = VECTOR('',#156995,1.); +#156995 = DIRECTION('',(0.447206955814,-0.894430510812,0.)); +#156996 = ORIENTED_EDGE('',*,*,#156997,.T.); +#156997 = EDGE_CURVE('',#156990,#156998,#157000,.T.); +#156998 = VERTEX_POINT('',#156999); +#156999 = CARTESIAN_POINT('',(128.118288,-108.744064,1.585)); +#157000 = LINE('',#157001,#157002); +#157001 = CARTESIAN_POINT('',(127.963389,-108.66393,1.585)); +#157002 = VECTOR('',#157003,1.); +#157003 = DIRECTION('',(0.888185286551,-0.45948546958,0.)); +#157004 = ORIENTED_EDGE('',*,*,#157005,.T.); +#157005 = EDGE_CURVE('',#156998,#157006,#157008,.T.); +#157006 = VERTEX_POINT('',#157007); +#157007 = CARTESIAN_POINT('',(128.008633,-108.963375,1.585)); +#157008 = CIRCLE('',#157009,0.125000271896); +#157009 = AXIS2_PLACEMENT_3D('',#157010,#157011,#157012); +#157010 = CARTESIAN_POINT('',(128.04164884032,-108.8428137198,1.585)); +#157011 = DIRECTION('',(0.,0.,-1.)); +#157012 = DIRECTION('',(0.613111943766,0.789996040757,0.)); +#157013 = ORIENTED_EDGE('',*,*,#157014,.T.); +#157014 = EDGE_CURVE('',#157006,#157015,#157017,.T.); +#157015 = VERTEX_POINT('',#157016); +#157016 = CARTESIAN_POINT('',(127.793581,-108.855849,1.585)); +#157017 = LINE('',#157018,#157019); +#157018 = CARTESIAN_POINT('',(128.008633,-108.963375,1.585)); +#157019 = VECTOR('',#157020,1.); +#157020 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#157021 = ORIENTED_EDGE('',*,*,#157022,.T.); +#157022 = EDGE_CURVE('',#157015,#157023,#157025,.T.); +#157023 = VERTEX_POINT('',#157024); +#157024 = CARTESIAN_POINT('',(127.760983,-108.81708,1.585)); +#157025 = LINE('',#157026,#157027); +#157026 = CARTESIAN_POINT('',(127.793581,-108.855849,1.585)); +#157027 = VECTOR('',#157028,1.); +#157028 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#157029 = ORIENTED_EDGE('',*,*,#157030,.T.); +#157030 = EDGE_CURVE('',#157023,#157031,#157033,.T.); +#157031 = VERTEX_POINT('',#157032); +#157032 = CARTESIAN_POINT('',(127.663945,-108.618687,1.585)); +#157033 = LINE('',#157034,#157035); +#157034 = CARTESIAN_POINT('',(127.760983,-108.81708,1.585)); +#157035 = VECTOR('',#157036,1.); +#157036 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#157037 = ORIENTED_EDGE('',*,*,#157038,.T.); +#157038 = EDGE_CURVE('',#157031,#157039,#157041,.T.); +#157039 = VERTEX_POINT('',#157040); +#157040 = CARTESIAN_POINT('',(127.659506,-108.585671,1.585)); +#157041 = LINE('',#157042,#157043); +#157042 = CARTESIAN_POINT('',(127.663945,-108.618687,1.585)); +#157043 = VECTOR('',#157044,1.); +#157044 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#157045 = ORIENTED_EDGE('',*,*,#157046,.T.); +#157046 = EDGE_CURVE('',#157039,#157047,#157049,.T.); +#157047 = VERTEX_POINT('',#157048); +#157048 = CARTESIAN_POINT('',(127.661908,-107.018428,1.585)); +#157049 = LINE('',#157050,#157051); +#157050 = CARTESIAN_POINT('',(127.659506,-108.585671,1.585)); +#157051 = VECTOR('',#157052,1.); +#157052 = DIRECTION('',(1.532625878005E-03,0.999998825528,0.)); +#157053 = ORIENTED_EDGE('',*,*,#157054,.T.); +#157054 = EDGE_CURVE('',#157047,#157055,#157057,.T.); +#157055 = VERTEX_POINT('',#157056); +#157056 = CARTESIAN_POINT('',(127.680572,-106.973368,1.585)); +#157057 = LINE('',#157058,#157059); +#157058 = CARTESIAN_POINT('',(127.661908,-107.018428,1.585)); +#157059 = VECTOR('',#157060,1.); +#157060 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157061 = ORIENTED_EDGE('',*,*,#157062,.T.); +#157062 = EDGE_CURVE('',#157055,#156971,#157063,.T.); +#157063 = LINE('',#157064,#157065); +#157064 = CARTESIAN_POINT('',(127.680572,-106.973368,1.585)); +#157065 = VECTOR('',#157066,1.); +#157066 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157067 = PLANE('',#157068); +#157068 = AXIS2_PLACEMENT_3D('',#157069,#157070,#157071); +#157069 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157070 = DIRECTION('',(0.,0.,1.)); +#157071 = DIRECTION('',(1.,0.,-0.)); +#157072 = SHELL_BASED_SURFACE_MODEL('',(#157073)); +#157073 = OPEN_SHELL('',(#157074)); +#157074 = ADVANCED_FACE('',(#157075),#157175,.T.); +#157075 = FACE_BOUND('',#157076,.F.); +#157076 = EDGE_LOOP('',(#157077,#157088,#157096,#157104,#157112,#157121, + #157129,#157137,#157145,#157153,#157161,#157169)); +#157077 = ORIENTED_EDGE('',*,*,#157078,.T.); +#157078 = EDGE_CURVE('',#157079,#157081,#157083,.T.); +#157079 = VERTEX_POINT('',#157080); +#157080 = CARTESIAN_POINT('',(137.91506,-106.93888,1.585)); +#157081 = VERTEX_POINT('',#157082); +#157082 = CARTESIAN_POINT('',(138.107104,-107.018428,1.585)); +#157083 = CIRCLE('',#157084,0.124999692383); +#157084 = AXIS2_PLACEMENT_3D('',#157085,#157086,#157087); +#157085 = CARTESIAN_POINT('',(137.984506,-107.042813518,1.585)); +#157086 = DIRECTION('',(0.,0.,-1.)); +#157087 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157088 = ORIENTED_EDGE('',*,*,#157089,.T.); +#157089 = EDGE_CURVE('',#157081,#157090,#157092,.T.); +#157090 = VERTEX_POINT('',#157091); +#157091 = CARTESIAN_POINT('',(138.109506,-108.556162,1.585)); +#157092 = LINE('',#157093,#157094); +#157093 = CARTESIAN_POINT('',(138.107104,-107.018428,1.585)); +#157094 = VECTOR('',#157095,1.); +#157095 = DIRECTION('',(1.562036782451E-03,-0.99999878002,0.)); +#157096 = ORIENTED_EDGE('',*,*,#157097,.T.); +#157097 = EDGE_CURVE('',#157090,#157098,#157100,.T.); +#157098 = VERTEX_POINT('',#157099); +#157099 = CARTESIAN_POINT('',(138.163389,-108.66393,1.585)); +#157100 = LINE('',#157101,#157102); +#157101 = CARTESIAN_POINT('',(138.109506,-108.556162,1.585)); +#157102 = VECTOR('',#157103,1.); +#157103 = DIRECTION('',(0.447206955813,-0.894430510812,0.)); +#157104 = ORIENTED_EDGE('',*,*,#157105,.T.); +#157105 = EDGE_CURVE('',#157098,#157106,#157108,.T.); +#157106 = VERTEX_POINT('',#157107); +#157107 = CARTESIAN_POINT('',(138.318288,-108.744064,1.585)); +#157108 = LINE('',#157109,#157110); +#157109 = CARTESIAN_POINT('',(138.163389,-108.66393,1.585)); +#157110 = VECTOR('',#157111,1.); +#157111 = DIRECTION('',(0.888185286551,-0.45948546958,0.)); +#157112 = ORIENTED_EDGE('',*,*,#157113,.T.); +#157113 = EDGE_CURVE('',#157106,#157114,#157116,.T.); +#157114 = VERTEX_POINT('',#157115); +#157115 = CARTESIAN_POINT('',(138.208633,-108.963375,1.585)); +#157116 = CIRCLE('',#157117,0.125000271896); +#157117 = AXIS2_PLACEMENT_3D('',#157118,#157119,#157120); +#157118 = CARTESIAN_POINT('',(138.24164884032,-108.8428137198,1.585)); +#157119 = DIRECTION('',(0.,0.,-1.)); +#157120 = DIRECTION('',(0.613111943766,0.789996040757,0.)); +#157121 = ORIENTED_EDGE('',*,*,#157122,.T.); +#157122 = EDGE_CURVE('',#157114,#157123,#157125,.T.); +#157123 = VERTEX_POINT('',#157124); +#157124 = CARTESIAN_POINT('',(137.993581,-108.855849,1.585)); +#157125 = LINE('',#157126,#157127); +#157126 = CARTESIAN_POINT('',(138.208633,-108.963375,1.585)); +#157127 = VECTOR('',#157128,1.); +#157128 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#157129 = ORIENTED_EDGE('',*,*,#157130,.T.); +#157130 = EDGE_CURVE('',#157123,#157131,#157133,.T.); +#157131 = VERTEX_POINT('',#157132); +#157132 = CARTESIAN_POINT('',(137.960983,-108.81708,1.585)); +#157133 = LINE('',#157134,#157135); +#157134 = CARTESIAN_POINT('',(137.993581,-108.855849,1.585)); +#157135 = VECTOR('',#157136,1.); +#157136 = DIRECTION('',(-0.643562875553,0.765393248736,0.)); +#157137 = ORIENTED_EDGE('',*,*,#157138,.T.); +#157138 = EDGE_CURVE('',#157131,#157139,#157141,.T.); +#157139 = VERTEX_POINT('',#157140); +#157140 = CARTESIAN_POINT('',(137.863945,-108.618687,1.585)); +#157141 = LINE('',#157142,#157143); +#157142 = CARTESIAN_POINT('',(137.960983,-108.81708,1.585)); +#157143 = VECTOR('',#157144,1.); +#157144 = DIRECTION('',(-0.439377741243,0.898302399251,0.)); +#157145 = ORIENTED_EDGE('',*,*,#157146,.T.); +#157146 = EDGE_CURVE('',#157139,#157147,#157149,.T.); +#157147 = VERTEX_POINT('',#157148); +#157148 = CARTESIAN_POINT('',(137.859506,-108.585671,1.585)); +#157149 = LINE('',#157150,#157151); +#157150 = CARTESIAN_POINT('',(137.863945,-108.618687,1.585)); +#157151 = VECTOR('',#157152,1.); +#157152 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#157153 = ORIENTED_EDGE('',*,*,#157154,.T.); +#157154 = EDGE_CURVE('',#157147,#157155,#157157,.T.); +#157155 = VERTEX_POINT('',#157156); +#157156 = CARTESIAN_POINT('',(137.861908,-107.018428,1.585)); +#157157 = LINE('',#157158,#157159); +#157158 = CARTESIAN_POINT('',(137.859506,-108.585671,1.585)); +#157159 = VECTOR('',#157160,1.); +#157160 = DIRECTION('',(1.532625877996E-03,0.999998825528,0.)); +#157161 = ORIENTED_EDGE('',*,*,#157162,.T.); +#157162 = EDGE_CURVE('',#157155,#157163,#157165,.T.); +#157163 = VERTEX_POINT('',#157164); +#157164 = CARTESIAN_POINT('',(137.880572,-106.973368,1.585)); +#157165 = LINE('',#157166,#157167); +#157166 = CARTESIAN_POINT('',(137.861908,-107.018428,1.585)); +#157167 = VECTOR('',#157168,1.); +#157168 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157169 = ORIENTED_EDGE('',*,*,#157170,.T.); +#157170 = EDGE_CURVE('',#157163,#157079,#157171,.T.); +#157171 = LINE('',#157172,#157173); +#157172 = CARTESIAN_POINT('',(137.880572,-106.973368,1.585)); +#157173 = VECTOR('',#157174,1.); +#157174 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#157175 = PLANE('',#157176); +#157176 = AXIS2_PLACEMENT_3D('',#157177,#157178,#157179); +#157177 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157178 = DIRECTION('',(0.,0.,1.)); +#157179 = DIRECTION('',(1.,0.,-0.)); +#157180 = SHELL_BASED_SURFACE_MODEL('',(#157181)); +#157181 = OPEN_SHELL('',(#157182)); +#157182 = ADVANCED_FACE('',(#157183),#157269,.T.); +#157183 = FACE_BOUND('',#157184,.F.); +#157184 = EDGE_LOOP('',(#157185,#157196,#157204,#157212,#157220,#157229, + #157237,#157246,#157254,#157263)); +#157185 = ORIENTED_EDGE('',*,*,#157186,.T.); +#157186 = EDGE_CURVE('',#157187,#157189,#157191,.T.); +#157187 = VERTEX_POINT('',#157188); +#157188 = CARTESIAN_POINT('',(116.69048,-107.618428,1.585)); +#157189 = VERTEX_POINT('',#157190); +#157190 = CARTESIAN_POINT('',(116.933878,-107.614088,1.585)); +#157191 = CIRCLE('',#157192,0.12449085405); +#157192 = AXIS2_PLACEMENT_3D('',#157193,#157194,#157195); +#157193 = CARTESIAN_POINT('',(116.81264479231,-107.6423807923,1.585)); +#157194 = DIRECTION('',(0.,0.,-1.)); +#157195 = DIRECTION('',(-0.981315400644,0.192406040597,0.)); +#157196 = ORIENTED_EDGE('',*,*,#157197,.T.); +#157197 = EDGE_CURVE('',#157189,#157198,#157200,.T.); +#157198 = VERTEX_POINT('',#157199); +#157199 = CARTESIAN_POINT('',(117.122919,-107.522253,1.585)); +#157200 = LINE('',#157201,#157202); +#157201 = CARTESIAN_POINT('',(116.933878,-107.614088,1.585)); +#157202 = VECTOR('',#157203,1.); +#157203 = DIRECTION('',(0.899479947392,0.436962039815,0.)); +#157204 = ORIENTED_EDGE('',*,*,#157205,.T.); +#157205 = EDGE_CURVE('',#157198,#157206,#157208,.T.); +#157206 = VERTEX_POINT('',#157207); +#157207 = CARTESIAN_POINT('',(117.155935,-107.517814,1.585)); +#157208 = LINE('',#157209,#157210); +#157209 = CARTESIAN_POINT('',(117.122919,-107.522253,1.585)); +#157210 = VECTOR('',#157211,1.); +#157211 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157212 = ORIENTED_EDGE('',*,*,#157213,.T.); +#157213 = EDGE_CURVE('',#157206,#157214,#157216,.T.); +#157214 = VERTEX_POINT('',#157215); +#157215 = CARTESIAN_POINT('',(117.35175,-107.520216,1.585)); +#157216 = LINE('',#157217,#157218); +#157217 = CARTESIAN_POINT('',(117.155935,-107.517814,1.585)); +#157218 = VECTOR('',#157219,1.); +#157219 = DIRECTION('',(0.999924772767,-1.226575749656E-02,0.)); +#157220 = ORIENTED_EDGE('',*,*,#157221,.T.); +#157221 = EDGE_CURVE('',#157214,#157222,#157224,.T.); +#157222 = VERTEX_POINT('',#157223); +#157223 = CARTESIAN_POINT('',(117.35175,-107.765412,1.585)); +#157224 = CIRCLE('',#157225,0.1249997864); +#157225 = AXIS2_PLACEMENT_3D('',#157226,#157227,#157228); +#157226 = CARTESIAN_POINT('',(117.327364,-107.642814,1.585)); +#157227 = DIRECTION('',(0.,0.,-1.)); +#157228 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#157229 = ORIENTED_EDGE('',*,*,#157230,.T.); +#157230 = EDGE_CURVE('',#157222,#157231,#157233,.T.); +#157231 = VERTEX_POINT('',#157232); +#157232 = CARTESIAN_POINT('',(117.185444,-107.767814,1.585)); +#157233 = LINE('',#157234,#157235); +#157234 = CARTESIAN_POINT('',(117.35175,-107.765412,1.585)); +#157235 = VECTOR('',#157236,1.); +#157236 = DIRECTION('',(-0.999895712506,-1.444174895339E-02,0.)); +#157237 = ORIENTED_EDGE('',*,*,#157238,.T.); +#157238 = EDGE_CURVE('',#157231,#157239,#157241,.T.); +#157239 = VERTEX_POINT('',#157240); +#157240 = CARTESIAN_POINT('',(116.938078,-108.015179,1.585)); +#157241 = CIRCLE('',#157242,0.347632380397); +#157242 = AXIS2_PLACEMENT_3D('',#157243,#157244,#157245); +#157243 = CARTESIAN_POINT('',(117.27419106113,-108.1039274199,1.585)); +#157244 = DIRECTION('',(0.,0.,1.)); +#157245 = DIRECTION('',(-0.25528997337,0.966864535236,0.)); +#157246 = ORIENTED_EDGE('',*,*,#157247,.T.); +#157247 = EDGE_CURVE('',#157239,#157248,#157250,.T.); +#157248 = VERTEX_POINT('',#157249); +#157249 = CARTESIAN_POINT('',(116.935676,-108.8672,1.585)); +#157250 = LINE('',#157251,#157252); +#157251 = CARTESIAN_POINT('',(116.938078,-108.015179,1.585)); +#157252 = VECTOR('',#157253,1.); +#157253 = DIRECTION('',(-2.81916813645E-03,-0.999996026138,0.)); +#157254 = ORIENTED_EDGE('',*,*,#157255,.T.); +#157255 = EDGE_CURVE('',#157248,#157256,#157258,.T.); +#157256 = VERTEX_POINT('',#157257); +#157257 = CARTESIAN_POINT('',(116.69048,-108.8672,1.585)); +#157258 = CIRCLE('',#157259,0.1249997864); +#157259 = AXIS2_PLACEMENT_3D('',#157260,#157261,#157262); +#157260 = CARTESIAN_POINT('',(116.813078,-108.842814,1.585)); +#157261 = DIRECTION('',(-0.,0.,-1.)); +#157262 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157263 = ORIENTED_EDGE('',*,*,#157264,.T.); +#157264 = EDGE_CURVE('',#157256,#157187,#157265,.T.); +#157265 = LINE('',#157266,#157267); +#157266 = CARTESIAN_POINT('',(116.69048,-108.8672,1.585)); +#157267 = VECTOR('',#157268,1.); +#157268 = DIRECTION('',(0.,1.,0.)); +#157269 = PLANE('',#157270); +#157270 = AXIS2_PLACEMENT_3D('',#157271,#157272,#157273); +#157271 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157272 = DIRECTION('',(0.,0.,1.)); +#157273 = DIRECTION('',(1.,0.,-0.)); +#157274 = SHELL_BASED_SURFACE_MODEL('',(#157275)); +#157275 = OPEN_SHELL('',(#157276)); +#157276 = ADVANCED_FACE('',(#157277,#157457),#157525,.T.); +#157277 = FACE_BOUND('',#157278,.F.); +#157278 = EDGE_LOOP('',(#157279,#157290,#157298,#157307,#157315,#157323, + #157331,#157339,#157347,#157355,#157363,#157371,#157379,#157387, + #157395,#157403,#157411,#157419,#157427,#157435,#157443,#157451)); +#157279 = ORIENTED_EDGE('',*,*,#157280,.T.); +#157280 = EDGE_CURVE('',#157281,#157283,#157285,.T.); +#157281 = VERTEX_POINT('',#157282); +#157282 = CARTESIAN_POINT('',(118.629347,-106.93888,1.585)); +#157283 = VERTEX_POINT('',#157284); +#157284 = CARTESIAN_POINT('',(118.821391,-107.018428,1.585)); +#157285 = CIRCLE('',#157286,0.124999692383); +#157286 = AXIS2_PLACEMENT_3D('',#157287,#157288,#157289); +#157287 = CARTESIAN_POINT('',(118.698793,-107.042813518,1.585)); +#157288 = DIRECTION('',(0.,0.,-1.)); +#157289 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157290 = ORIENTED_EDGE('',*,*,#157291,.T.); +#157291 = EDGE_CURVE('',#157283,#157292,#157294,.T.); +#157292 = VERTEX_POINT('',#157293); +#157293 = CARTESIAN_POINT('',(118.821391,-108.8672,1.585)); +#157294 = LINE('',#157295,#157296); +#157295 = CARTESIAN_POINT('',(118.821391,-107.018428,1.585)); +#157296 = VECTOR('',#157297,1.); +#157297 = DIRECTION('',(0.,-1.,0.)); +#157298 = ORIENTED_EDGE('',*,*,#157299,.T.); +#157299 = EDGE_CURVE('',#157292,#157300,#157302,.T.); +#157300 = VERTEX_POINT('',#157301); +#157301 = CARTESIAN_POINT('',(118.629347,-108.946748,1.585)); +#157302 = CIRCLE('',#157303,0.124999692383); +#157303 = AXIS2_PLACEMENT_3D('',#157304,#157305,#157306); +#157304 = CARTESIAN_POINT('',(118.698793,-108.8428144819,1.585)); +#157305 = DIRECTION('',(-0.,0.,-1.)); +#157306 = DIRECTION('',(0.980786413651,-0.195084624708,-0.)); +#157307 = ORIENTED_EDGE('',*,*,#157308,.T.); +#157308 = EDGE_CURVE('',#157300,#157309,#157311,.T.); +#157309 = VERTEX_POINT('',#157310); +#157310 = CARTESIAN_POINT('',(118.619233,-108.936634,1.585)); +#157311 = LINE('',#157312,#157313); +#157312 = CARTESIAN_POINT('',(118.629347,-108.946748,1.585)); +#157313 = VECTOR('',#157314,1.); +#157314 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#157315 = ORIENTED_EDGE('',*,*,#157316,.T.); +#157316 = EDGE_CURVE('',#157309,#157317,#157319,.T.); +#157317 = VERTEX_POINT('',#157318); +#157318 = CARTESIAN_POINT('',(118.55175,-108.965412,1.585)); +#157319 = LINE('',#157320,#157321); +#157320 = CARTESIAN_POINT('',(118.619233,-108.936634,1.585)); +#157321 = VECTOR('',#157322,1.); +#157322 = DIRECTION('',(-0.919850708094,-0.39226862584,0.)); +#157323 = ORIENTED_EDGE('',*,*,#157324,.T.); +#157324 = EDGE_CURVE('',#157317,#157325,#157327,.T.); +#157325 = VERTEX_POINT('',#157326); +#157326 = CARTESIAN_POINT('',(118.160121,-108.965412,1.585)); +#157327 = LINE('',#157328,#157329); +#157328 = CARTESIAN_POINT('',(118.55175,-108.965412,1.585)); +#157329 = VECTOR('',#157330,1.); +#157330 = DIRECTION('',(-1.,0.,0.)); +#157331 = ORIENTED_EDGE('',*,*,#157332,.T.); +#157332 = EDGE_CURVE('',#157325,#157333,#157335,.T.); +#157333 = VERTEX_POINT('',#157334); +#157334 = CARTESIAN_POINT('',(118.128605,-108.954617,1.585)); +#157335 = LINE('',#157336,#157337); +#157336 = CARTESIAN_POINT('',(118.160121,-108.965412,1.585)); +#157337 = VECTOR('',#157338,1.); +#157338 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#157339 = ORIENTED_EDGE('',*,*,#157340,.T.); +#157340 = EDGE_CURVE('',#157333,#157341,#157343,.T.); +#157341 = VERTEX_POINT('',#157342); +#157342 = CARTESIAN_POINT('',(117.936439,-108.855849,1.585)); +#157343 = LINE('',#157344,#157345); +#157344 = CARTESIAN_POINT('',(118.128605,-108.954617,1.585)); +#157345 = VECTOR('',#157346,1.); +#157346 = DIRECTION('',(-0.889401148827,0.457127549449,0.)); +#157347 = ORIENTED_EDGE('',*,*,#157348,.T.); +#157348 = EDGE_CURVE('',#157341,#157349,#157351,.T.); +#157349 = VERTEX_POINT('',#157350); +#157350 = CARTESIAN_POINT('',(117.82343,-108.740831,1.585)); +#157351 = LINE('',#157352,#157353); +#157352 = CARTESIAN_POINT('',(117.936439,-108.855849,1.585)); +#157353 = VECTOR('',#157354,1.); +#157354 = DIRECTION('',(-0.700849715454,0.713308962756,0.)); +#157355 = ORIENTED_EDGE('',*,*,#157356,.T.); +#157356 = EDGE_CURVE('',#157349,#157357,#157359,.T.); +#157357 = VERTEX_POINT('',#157358); +#157358 = CARTESIAN_POINT('',(117.721089,-108.532973,1.585)); +#157359 = LINE('',#157360,#157361); +#157360 = CARTESIAN_POINT('',(117.82343,-108.740831,1.585)); +#157361 = VECTOR('',#157362,1.); +#157362 = DIRECTION('',(-0.441721919769,0.897152019223,0.)); +#157363 = ORIENTED_EDGE('',*,*,#157364,.T.); +#157364 = EDGE_CURVE('',#157357,#157365,#157367,.T.); +#157365 = VERTEX_POINT('',#157366); +#157366 = CARTESIAN_POINT('',(117.71665,-108.499957,1.585)); +#157367 = LINE('',#157368,#157369); +#157368 = CARTESIAN_POINT('',(117.721089,-108.532973,1.585)); +#157369 = VECTOR('',#157370,1.); +#157370 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#157371 = ORIENTED_EDGE('',*,*,#157372,.T.); +#157372 = EDGE_CURVE('',#157365,#157373,#157375,.T.); +#157373 = VERTEX_POINT('',#157374); +#157374 = CARTESIAN_POINT('',(117.719052,-107.961285,1.585)); +#157375 = LINE('',#157376,#157377); +#157376 = CARTESIAN_POINT('',(117.71665,-108.499957,1.585)); +#157377 = VECTOR('',#157378,1.); +#157378 = DIRECTION('',(4.459069935018E-03,0.999990058298,0.)); +#157379 = ORIENTED_EDGE('',*,*,#157380,.T.); +#157380 = EDGE_CURVE('',#157373,#157381,#157383,.T.); +#157381 = VERTEX_POINT('',#157382); +#157382 = CARTESIAN_POINT('',(117.729846,-107.92977,1.585)); +#157383 = LINE('',#157384,#157385); +#157384 = CARTESIAN_POINT('',(117.719052,-107.961285,1.585)); +#157385 = VECTOR('',#157386,1.); +#157386 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#157387 = ORIENTED_EDGE('',*,*,#157388,.T.); +#157388 = EDGE_CURVE('',#157381,#157389,#157391,.T.); +#157389 = VERTEX_POINT('',#157390); +#157390 = CARTESIAN_POINT('',(117.828614,-107.737603,1.585)); +#157391 = LINE('',#157392,#157393); +#157392 = CARTESIAN_POINT('',(117.729846,-107.92977,1.585)); +#157393 = VECTOR('',#157394,1.); +#157394 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#157395 = ORIENTED_EDGE('',*,*,#157396,.T.); +#157396 = EDGE_CURVE('',#157389,#157397,#157399,.T.); +#157397 = VERTEX_POINT('',#157398); +#157398 = CARTESIAN_POINT('',(117.943632,-107.624595,1.585)); +#157399 = LINE('',#157400,#157401); +#157400 = CARTESIAN_POINT('',(117.828614,-107.737603,1.585)); +#157401 = VECTOR('',#157402,1.); +#157402 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#157403 = ORIENTED_EDGE('',*,*,#157404,.T.); +#157404 = EDGE_CURVE('',#157397,#157405,#157407,.T.); +#157405 = VERTEX_POINT('',#157406); +#157406 = CARTESIAN_POINT('',(118.151491,-107.522253,1.585)); +#157407 = LINE('',#157408,#157409); +#157408 = CARTESIAN_POINT('',(117.943632,-107.624595,1.585)); +#157409 = VECTOR('',#157410,1.); +#157410 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#157411 = ORIENTED_EDGE('',*,*,#157412,.T.); +#157412 = EDGE_CURVE('',#157405,#157413,#157415,.T.); +#157413 = VERTEX_POINT('',#157414); +#157414 = CARTESIAN_POINT('',(118.184507,-107.517814,1.585)); +#157415 = LINE('',#157416,#157417); +#157416 = CARTESIAN_POINT('',(118.151491,-107.522253,1.585)); +#157417 = VECTOR('',#157418,1.); +#157418 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157419 = ORIENTED_EDGE('',*,*,#157420,.T.); +#157420 = EDGE_CURVE('',#157413,#157421,#157423,.T.); +#157421 = VERTEX_POINT('',#157422); +#157422 = CARTESIAN_POINT('',(118.55175,-107.520216,1.585)); +#157423 = LINE('',#157424,#157425); +#157424 = CARTESIAN_POINT('',(118.184507,-107.517814,1.585)); +#157425 = VECTOR('',#157426,1.); +#157426 = DIRECTION('',(0.999978610776,-6.540488513295E-03,0.)); +#157427 = ORIENTED_EDGE('',*,*,#157428,.T.); +#157428 = EDGE_CURVE('',#157421,#157429,#157431,.T.); +#157429 = VERTEX_POINT('',#157430); +#157430 = CARTESIAN_POINT('',(118.573793,-107.527385,1.585)); +#157431 = LINE('',#157432,#157433); +#157432 = CARTESIAN_POINT('',(118.55175,-107.520216,1.585)); +#157433 = VECTOR('',#157434,1.); +#157434 = DIRECTION('',(0.950970323812,-0.309282141787,0.)); +#157435 = ORIENTED_EDGE('',*,*,#157436,.T.); +#157436 = EDGE_CURVE('',#157429,#157437,#157439,.T.); +#157437 = VERTEX_POINT('',#157438); +#157438 = CARTESIAN_POINT('',(118.576195,-107.018428,1.585)); +#157439 = LINE('',#157440,#157441); +#157440 = CARTESIAN_POINT('',(118.573793,-107.527385,1.585)); +#157441 = VECTOR('',#157442,1.); +#157442 = DIRECTION('',(4.719403113157E-03,0.999988863555,0.)); +#157443 = ORIENTED_EDGE('',*,*,#157444,.T.); +#157444 = EDGE_CURVE('',#157437,#157445,#157447,.T.); +#157445 = VERTEX_POINT('',#157446); +#157446 = CARTESIAN_POINT('',(118.594859,-106.973368,1.585)); +#157447 = LINE('',#157448,#157449); +#157448 = CARTESIAN_POINT('',(118.576195,-107.018428,1.585)); +#157449 = VECTOR('',#157450,1.); +#157450 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157451 = ORIENTED_EDGE('',*,*,#157452,.T.); +#157452 = EDGE_CURVE('',#157445,#157281,#157453,.T.); +#157453 = LINE('',#157454,#157455); +#157454 = CARTESIAN_POINT('',(118.594859,-106.973368,1.585)); +#157455 = VECTOR('',#157456,1.); +#157456 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157457 = FACE_BOUND('',#157458,.F.); +#157458 = EDGE_LOOP('',(#157459,#157469,#157477,#157486,#157494,#157503, + #157511,#157519)); +#157459 = ORIENTED_EDGE('',*,*,#157460,.T.); +#157460 = EDGE_CURVE('',#157461,#157463,#157465,.T.); +#157461 = VERTEX_POINT('',#157462); +#157462 = CARTESIAN_POINT('',(118.573793,-107.805782,1.585)); +#157463 = VERTEX_POINT('',#157464); +#157464 = CARTESIAN_POINT('',(118.497855,-107.767814,1.585)); +#157465 = LINE('',#157466,#157467); +#157466 = CARTESIAN_POINT('',(118.573793,-107.805782,1.585)); +#157467 = VECTOR('',#157468,1.); +#157468 = DIRECTION('',(-0.89443190233,0.447204172715,0.)); +#157469 = ORIENTED_EDGE('',*,*,#157470,.T.); +#157470 = EDGE_CURVE('',#157463,#157471,#157473,.T.); +#157471 = VERTEX_POINT('',#157472); +#157472 = CARTESIAN_POINT('',(118.214016,-107.767814,1.585)); +#157473 = LINE('',#157474,#157475); +#157474 = CARTESIAN_POINT('',(118.497855,-107.767814,1.585)); +#157475 = VECTOR('',#157476,1.); +#157476 = DIRECTION('',(-1.,0.,0.)); +#157477 = ORIENTED_EDGE('',*,*,#157478,.T.); +#157478 = EDGE_CURVE('',#157471,#157479,#157481,.T.); +#157479 = VERTEX_POINT('',#157480); +#157480 = CARTESIAN_POINT('',(117.96665,-108.015179,1.585)); +#157481 = CIRCLE('',#157482,0.347626269899); +#157482 = AXIS2_PLACEMENT_3D('',#157483,#157484,#157485); +#157483 = CARTESIAN_POINT('',(118.30275806136,-108.1039224201,1.585)); +#157484 = DIRECTION('',(0.,0.,1.)); +#157485 = DIRECTION('',(-0.255280078187,0.966867147896,0.)); +#157486 = ORIENTED_EDGE('',*,*,#157487,.T.); +#157487 = EDGE_CURVE('',#157479,#157488,#157490,.T.); +#157488 = VERTEX_POINT('',#157489); +#157489 = CARTESIAN_POINT('',(117.96665,-108.470449,1.585)); +#157490 = LINE('',#157491,#157492); +#157491 = CARTESIAN_POINT('',(117.96665,-108.015179,1.585)); +#157492 = VECTOR('',#157493,1.); +#157493 = DIRECTION('',(0.,-1.,0.)); +#157494 = ORIENTED_EDGE('',*,*,#157495,.T.); +#157495 = EDGE_CURVE('',#157488,#157496,#157498,.T.); +#157496 = VERTEX_POINT('',#157497); +#157497 = CARTESIAN_POINT('',(118.214016,-108.717814,1.585)); +#157498 = CIRCLE('',#157499,0.347636928416); +#157499 = AXIS2_PLACEMENT_3D('',#157500,#157501,#157502); +#157500 = CARTESIAN_POINT('',(118.30276678242,-108.3816968587,1.585)); +#157501 = DIRECTION('',(0.,0.,1.)); +#157502 = DIRECTION('',(-0.966861558574,-0.25530124667,0.)); +#157503 = ORIENTED_EDGE('',*,*,#157504,.T.); +#157504 = EDGE_CURVE('',#157496,#157505,#157507,.T.); +#157505 = VERTEX_POINT('',#157506); +#157506 = CARTESIAN_POINT('',(118.497855,-108.717814,1.585)); +#157507 = LINE('',#157508,#157509); +#157508 = CARTESIAN_POINT('',(118.214016,-108.717814,1.585)); +#157509 = VECTOR('',#157510,1.); +#157510 = DIRECTION('',(1.,0.,0.)); +#157511 = ORIENTED_EDGE('',*,*,#157512,.T.); +#157512 = EDGE_CURVE('',#157505,#157513,#157515,.T.); +#157513 = VERTEX_POINT('',#157514); +#157514 = CARTESIAN_POINT('',(118.573793,-108.679845,1.585)); +#157515 = LINE('',#157516,#157517); +#157516 = CARTESIAN_POINT('',(118.497855,-108.717814,1.585)); +#157517 = VECTOR('',#157518,1.); +#157518 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#157519 = ORIENTED_EDGE('',*,*,#157520,.T.); +#157520 = EDGE_CURVE('',#157513,#157461,#157521,.T.); +#157521 = LINE('',#157522,#157523); +#157522 = CARTESIAN_POINT('',(118.573793,-108.679845,1.585)); +#157523 = VECTOR('',#157524,1.); +#157524 = DIRECTION('',(0.,1.,0.)); +#157525 = PLANE('',#157526); +#157526 = AXIS2_PLACEMENT_3D('',#157527,#157528,#157529); +#157527 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157528 = DIRECTION('',(0.,0.,1.)); +#157529 = DIRECTION('',(1.,0.,-0.)); +#157530 = SHELL_BASED_SURFACE_MODEL('',(#157531)); +#157531 = OPEN_SHELL('',(#157532)); +#157532 = ADVANCED_FACE('',(#157533),#157585,.T.); +#157533 = FACE_BOUND('',#157534,.F.); +#157534 = EDGE_LOOP('',(#157535,#157546,#157554,#157563,#157571,#157579) + ); +#157535 = ORIENTED_EDGE('',*,*,#157536,.T.); +#157536 = EDGE_CURVE('',#157537,#157539,#157541,.T.); +#157537 = VERTEX_POINT('',#157538); +#157538 = CARTESIAN_POINT('',(122.829346,-107.53888,1.585)); +#157539 = VERTEX_POINT('',#157540); +#157540 = CARTESIAN_POINT('',(123.02139,-107.618428,1.585)); +#157541 = CIRCLE('',#157542,0.124999692383); +#157542 = AXIS2_PLACEMENT_3D('',#157543,#157544,#157545); +#157543 = CARTESIAN_POINT('',(122.898792,-107.642813518,1.585)); +#157544 = DIRECTION('',(0.,0.,-1.)); +#157545 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157546 = ORIENTED_EDGE('',*,*,#157547,.T.); +#157547 = EDGE_CURVE('',#157539,#157548,#157550,.T.); +#157548 = VERTEX_POINT('',#157549); +#157549 = CARTESIAN_POINT('',(123.02139,-108.8672,1.585)); +#157550 = LINE('',#157551,#157552); +#157551 = CARTESIAN_POINT('',(123.02139,-107.618428,1.585)); +#157552 = VECTOR('',#157553,1.); +#157553 = DIRECTION('',(0.,-1.,0.)); +#157554 = ORIENTED_EDGE('',*,*,#157555,.T.); +#157555 = EDGE_CURVE('',#157548,#157556,#157558,.T.); +#157556 = VERTEX_POINT('',#157557); +#157557 = CARTESIAN_POINT('',(122.776194,-108.8672,1.585)); +#157558 = CIRCLE('',#157559,0.1249997864); +#157559 = AXIS2_PLACEMENT_3D('',#157560,#157561,#157562); +#157560 = CARTESIAN_POINT('',(122.898792,-108.842814,1.585)); +#157561 = DIRECTION('',(-0.,0.,-1.)); +#157562 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157563 = ORIENTED_EDGE('',*,*,#157564,.T.); +#157564 = EDGE_CURVE('',#157556,#157565,#157567,.T.); +#157565 = VERTEX_POINT('',#157566); +#157566 = CARTESIAN_POINT('',(122.776194,-107.618428,1.585)); +#157567 = LINE('',#157568,#157569); +#157568 = CARTESIAN_POINT('',(122.776194,-108.8672,1.585)); +#157569 = VECTOR('',#157570,1.); +#157570 = DIRECTION('',(0.,1.,0.)); +#157571 = ORIENTED_EDGE('',*,*,#157572,.T.); +#157572 = EDGE_CURVE('',#157565,#157573,#157575,.T.); +#157573 = VERTEX_POINT('',#157574); +#157574 = CARTESIAN_POINT('',(122.794858,-107.573368,1.585)); +#157575 = LINE('',#157576,#157577); +#157576 = CARTESIAN_POINT('',(122.776194,-107.618428,1.585)); +#157577 = VECTOR('',#157578,1.); +#157578 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157579 = ORIENTED_EDGE('',*,*,#157580,.T.); +#157580 = EDGE_CURVE('',#157573,#157537,#157581,.T.); +#157581 = LINE('',#157582,#157583); +#157582 = CARTESIAN_POINT('',(122.794858,-107.573368,1.585)); +#157583 = VECTOR('',#157584,1.); +#157584 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157585 = PLANE('',#157586); +#157586 = AXIS2_PLACEMENT_3D('',#157587,#157588,#157589); +#157587 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157588 = DIRECTION('',(0.,0.,1.)); +#157589 = DIRECTION('',(1.,0.,-0.)); +#157590 = SHELL_BASED_SURFACE_MODEL('',(#157591)); +#157591 = OPEN_SHELL('',(#157592)); +#157592 = ADVANCED_FACE('',(#157593),#157864,.T.); +#157593 = FACE_BOUND('',#157594,.F.); +#157594 = EDGE_LOOP('',(#157595,#157605,#157613,#157621,#157629,#157637, + #157645,#157653,#157661,#157669,#157678,#157686,#157694,#157703, + #157711,#157719,#157728,#157736,#157744,#157752,#157760,#157768, + #157776,#157784,#157793,#157801,#157810,#157818,#157826,#157834, + #157842,#157850,#157858)); +#157595 = ORIENTED_EDGE('',*,*,#157596,.T.); +#157596 = EDGE_CURVE('',#157597,#157599,#157601,.T.); +#157597 = VERTEX_POINT('',#157598); +#157598 = CARTESIAN_POINT('',(124.557176,-107.616725,1.585)); +#157599 = VERTEX_POINT('',#157600); +#157600 = CARTESIAN_POINT('',(124.75149,-107.522253,1.585)); +#157601 = LINE('',#157602,#157603); +#157602 = CARTESIAN_POINT('',(124.557176,-107.616725,1.585)); +#157603 = VECTOR('',#157604,1.); +#157604 = DIRECTION('',(0.899342728855,0.437244389392,0.)); +#157605 = ORIENTED_EDGE('',*,*,#157606,.T.); +#157606 = EDGE_CURVE('',#157599,#157607,#157609,.T.); +#157607 = VERTEX_POINT('',#157608); +#157608 = CARTESIAN_POINT('',(124.784506,-107.517814,1.585)); +#157609 = LINE('',#157610,#157611); +#157610 = CARTESIAN_POINT('',(124.75149,-107.522253,1.585)); +#157611 = VECTOR('',#157612,1.); +#157612 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157613 = ORIENTED_EDGE('',*,*,#157614,.T.); +#157614 = EDGE_CURVE('',#157607,#157615,#157617,.T.); +#157615 = VERTEX_POINT('',#157616); +#157616 = CARTESIAN_POINT('',(125.066035,-107.520216,1.585)); +#157617 = LINE('',#157618,#157619); +#157618 = CARTESIAN_POINT('',(124.784506,-107.517814,1.585)); +#157619 = VECTOR('',#157620,1.); +#157620 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#157621 = ORIENTED_EDGE('',*,*,#157622,.T.); +#157622 = EDGE_CURVE('',#157615,#157623,#157625,.T.); +#157623 = VERTEX_POINT('',#157624); +#157624 = CARTESIAN_POINT('',(125.09755,-107.53101,1.585)); +#157625 = LINE('',#157626,#157627); +#157626 = CARTESIAN_POINT('',(125.066035,-107.520216,1.585)); +#157627 = VECTOR('',#157628,1.); +#157628 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#157629 = ORIENTED_EDGE('',*,*,#157630,.T.); +#157630 = EDGE_CURVE('',#157623,#157631,#157633,.T.); +#157631 = VERTEX_POINT('',#157632); +#157632 = CARTESIAN_POINT('',(125.289717,-107.629778,1.585)); +#157633 = LINE('',#157634,#157635); +#157634 = CARTESIAN_POINT('',(125.09755,-107.53101,1.585)); +#157635 = VECTOR('',#157636,1.); +#157636 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#157637 = ORIENTED_EDGE('',*,*,#157638,.T.); +#157638 = EDGE_CURVE('',#157631,#157639,#157641,.T.); +#157639 = VERTEX_POINT('',#157640); +#157640 = CARTESIAN_POINT('',(125.322315,-107.668549,1.585)); +#157641 = LINE('',#157642,#157643); +#157642 = CARTESIAN_POINT('',(125.289717,-107.629778,1.585)); +#157643 = VECTOR('',#157644,1.); +#157644 = DIRECTION('',(0.643543426558,-0.765409601543,0.)); +#157645 = ORIENTED_EDGE('',*,*,#157646,.T.); +#157646 = EDGE_CURVE('',#157639,#157647,#157649,.T.); +#157647 = VERTEX_POINT('',#157648); +#157648 = CARTESIAN_POINT('',(125.419353,-107.866941,1.585)); +#157649 = LINE('',#157650,#157651); +#157650 = CARTESIAN_POINT('',(125.322315,-107.668549,1.585)); +#157651 = VECTOR('',#157652,1.); +#157652 = DIRECTION('',(0.439379528383,-0.898301525123,0.)); +#157653 = ORIENTED_EDGE('',*,*,#157654,.T.); +#157654 = EDGE_CURVE('',#157647,#157655,#157657,.T.); +#157655 = VERTEX_POINT('',#157656); +#157656 = CARTESIAN_POINT('',(125.423792,-107.899957,1.585)); +#157657 = LINE('',#157658,#157659); +#157658 = CARTESIAN_POINT('',(125.419353,-107.866941,1.585)); +#157659 = VECTOR('',#157660,1.); +#157660 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#157661 = ORIENTED_EDGE('',*,*,#157662,.T.); +#157662 = EDGE_CURVE('',#157655,#157663,#157665,.T.); +#157663 = VERTEX_POINT('',#157664); +#157664 = CARTESIAN_POINT('',(125.42139,-108.8672,1.585)); +#157665 = LINE('',#157666,#157667); +#157666 = CARTESIAN_POINT('',(125.423792,-107.899957,1.585)); +#157667 = VECTOR('',#157668,1.); +#157668 = DIRECTION('',(-2.483339340224E-03,-0.999996916508,0.)); +#157669 = ORIENTED_EDGE('',*,*,#157670,.T.); +#157670 = EDGE_CURVE('',#157663,#157671,#157673,.T.); +#157671 = VERTEX_POINT('',#157672); +#157672 = CARTESIAN_POINT('',(125.176194,-108.8672,1.585)); +#157673 = CIRCLE('',#157674,0.1249997864); +#157674 = AXIS2_PLACEMENT_3D('',#157675,#157676,#157677); +#157675 = CARTESIAN_POINT('',(125.298792,-108.842814,1.585)); +#157676 = DIRECTION('',(-0.,0.,-1.)); +#157677 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157678 = ORIENTED_EDGE('',*,*,#157679,.T.); +#157679 = EDGE_CURVE('',#157671,#157680,#157682,.T.); +#157680 = VERTEX_POINT('',#157681); +#157681 = CARTESIAN_POINT('',(125.173792,-107.929465,1.585)); +#157682 = LINE('',#157683,#157684); +#157683 = CARTESIAN_POINT('',(125.176194,-108.8672,1.585)); +#157684 = VECTOR('',#157685,1.); +#157685 = DIRECTION('',(-2.561482849613E-03,0.999996719397,0.)); +#157686 = ORIENTED_EDGE('',*,*,#157687,.T.); +#157687 = EDGE_CURVE('',#157680,#157688,#157690,.T.); +#157688 = VERTEX_POINT('',#157689); +#157689 = CARTESIAN_POINT('',(125.119908,-107.821697,1.585)); +#157690 = LINE('',#157691,#157692); +#157691 = CARTESIAN_POINT('',(125.173792,-107.929465,1.585)); +#157692 = VECTOR('',#157693,1.); +#157693 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#157694 = ORIENTED_EDGE('',*,*,#157695,.T.); +#157695 = EDGE_CURVE('',#157688,#157696,#157698,.T.); +#157696 = VERTEX_POINT('',#157697); +#157697 = CARTESIAN_POINT('',(124.706247,-107.821697,1.585)); +#157698 = CIRCLE('',#157699,0.347269293664); +#157699 = AXIS2_PLACEMENT_3D('',#157700,#157701,#157702); +#157700 = CARTESIAN_POINT('',(124.9130775,-108.1006541769,1.585)); +#157701 = DIRECTION('',(0.,0.,1.)); +#157702 = DIRECTION('',(0.595591098245,0.803287771407,-0.)); +#157703 = ORIENTED_EDGE('',*,*,#157704,.T.); +#157704 = EDGE_CURVE('',#157696,#157705,#157707,.T.); +#157705 = VERTEX_POINT('',#157706); +#157706 = CARTESIAN_POINT('',(124.652364,-107.929465,1.585)); +#157707 = LINE('',#157708,#157709); +#157708 = CARTESIAN_POINT('',(124.706247,-107.821697,1.585)); +#157709 = VECTOR('',#157710,1.); +#157710 = DIRECTION('',(-0.447206955813,-0.894430510812,0.)); +#157711 = ORIENTED_EDGE('',*,*,#157712,.T.); +#157712 = EDGE_CURVE('',#157705,#157713,#157715,.T.); +#157713 = VERTEX_POINT('',#157714); +#157714 = CARTESIAN_POINT('',(124.649962,-108.8672,1.585)); +#157715 = LINE('',#157716,#157717); +#157716 = CARTESIAN_POINT('',(124.652364,-107.929465,1.585)); +#157717 = VECTOR('',#157718,1.); +#157718 = DIRECTION('',(-2.561482849628E-03,-0.999996719397,0.)); +#157719 = ORIENTED_EDGE('',*,*,#157720,.T.); +#157720 = EDGE_CURVE('',#157713,#157721,#157723,.T.); +#157721 = VERTEX_POINT('',#157722); +#157722 = CARTESIAN_POINT('',(124.404766,-108.8672,1.585)); +#157723 = CIRCLE('',#157724,0.1249997864); +#157724 = AXIS2_PLACEMENT_3D('',#157725,#157726,#157727); +#157725 = CARTESIAN_POINT('',(124.527364,-108.842814,1.585)); +#157726 = DIRECTION('',(-0.,0.,-1.)); +#157727 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157728 = ORIENTED_EDGE('',*,*,#157729,.T.); +#157729 = EDGE_CURVE('',#157721,#157730,#157732,.T.); +#157730 = VERTEX_POINT('',#157731); +#157731 = CARTESIAN_POINT('',(124.402364,-107.929465,1.585)); +#157732 = LINE('',#157733,#157734); +#157733 = CARTESIAN_POINT('',(124.404766,-108.8672,1.585)); +#157734 = VECTOR('',#157735,1.); +#157735 = DIRECTION('',(-2.561482849613E-03,0.999996719397,0.)); +#157736 = ORIENTED_EDGE('',*,*,#157737,.T.); +#157737 = EDGE_CURVE('',#157730,#157738,#157740,.T.); +#157738 = VERTEX_POINT('',#157739); +#157739 = CARTESIAN_POINT('',(124.348479,-107.821697,1.585)); +#157740 = LINE('',#157741,#157742); +#157741 = CARTESIAN_POINT('',(124.402364,-107.929465,1.585)); +#157742 = VECTOR('',#157743,1.); +#157743 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#157744 = ORIENTED_EDGE('',*,*,#157745,.T.); +#157745 = EDGE_CURVE('',#157738,#157746,#157748,.T.); +#157746 = VERTEX_POINT('',#157747); +#157747 = CARTESIAN_POINT('',(124.240713,-107.767814,1.585)); +#157748 = LINE('',#157749,#157750); +#157749 = CARTESIAN_POINT('',(124.348479,-107.821697,1.585)); +#157750 = VECTOR('',#157751,1.); +#157751 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#157752 = ORIENTED_EDGE('',*,*,#157753,.T.); +#157753 = EDGE_CURVE('',#157746,#157754,#157756,.T.); +#157754 = VERTEX_POINT('',#157755); +#157755 = CARTESIAN_POINT('',(124.042587,-107.767814,1.585)); +#157756 = LINE('',#157757,#157758); +#157757 = CARTESIAN_POINT('',(124.240713,-107.767814,1.585)); +#157758 = VECTOR('',#157759,1.); +#157759 = DIRECTION('',(-1.,0.,0.)); +#157760 = ORIENTED_EDGE('',*,*,#157761,.T.); +#157761 = EDGE_CURVE('',#157754,#157762,#157764,.T.); +#157762 = VERTEX_POINT('',#157763); +#157763 = CARTESIAN_POINT('',(123.915691,-107.831261,1.585)); +#157764 = LINE('',#157765,#157766); +#157765 = CARTESIAN_POINT('',(124.042587,-107.767814,1.585)); +#157766 = VECTOR('',#157767,1.); +#157767 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#157768 = ORIENTED_EDGE('',*,*,#157769,.T.); +#157769 = EDGE_CURVE('',#157762,#157770,#157772,.T.); +#157770 = VERTEX_POINT('',#157771); +#157771 = CARTESIAN_POINT('',(123.880935,-107.866018,1.585)); +#157772 = LINE('',#157773,#157774); +#157773 = CARTESIAN_POINT('',(123.915691,-107.831261,1.585)); +#157774 = VECTOR('',#157775,1.); +#157775 = DIRECTION('',(-0.707096608818,-0.707116953409,0.)); +#157776 = ORIENTED_EDGE('',*,*,#157777,.T.); +#157777 = EDGE_CURVE('',#157770,#157778,#157780,.T.); +#157778 = VERTEX_POINT('',#157779); +#157779 = CARTESIAN_POINT('',(123.878533,-108.8672,1.585)); +#157780 = LINE('',#157781,#157782); +#157781 = CARTESIAN_POINT('',(123.880935,-107.866018,1.585)); +#157782 = VECTOR('',#157783,1.); +#157783 = DIRECTION('',(-2.399157283168E-03,-0.999997122018,0.)); +#157784 = ORIENTED_EDGE('',*,*,#157785,.T.); +#157785 = EDGE_CURVE('',#157778,#157786,#157788,.T.); +#157786 = VERTEX_POINT('',#157787); +#157787 = CARTESIAN_POINT('',(123.633337,-108.8672,1.585)); +#157788 = CIRCLE('',#157789,0.1249997864); +#157789 = AXIS2_PLACEMENT_3D('',#157790,#157791,#157792); +#157790 = CARTESIAN_POINT('',(123.755935,-108.842814,1.585)); +#157791 = DIRECTION('',(-0.,0.,-1.)); +#157792 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157793 = ORIENTED_EDGE('',*,*,#157794,.T.); +#157794 = EDGE_CURVE('',#157786,#157795,#157797,.T.); +#157795 = VERTEX_POINT('',#157796); +#157796 = CARTESIAN_POINT('',(123.633337,-107.618428,1.585)); +#157797 = LINE('',#157798,#157799); +#157798 = CARTESIAN_POINT('',(123.633337,-108.8672,1.585)); +#157799 = VECTOR('',#157800,1.); +#157800 = DIRECTION('',(0.,1.,0.)); +#157801 = ORIENTED_EDGE('',*,*,#157802,.T.); +#157802 = EDGE_CURVE('',#157795,#157803,#157805,.T.); +#157803 = VERTEX_POINT('',#157804); +#157804 = CARTESIAN_POINT('',(123.862029,-107.578583,1.585)); +#157805 = CIRCLE('',#157806,0.124243077393); +#157806 = AXIS2_PLACEMENT_3D('',#157807,#157808,#157809); +#157807 = CARTESIAN_POINT('',(123.75529059367,-107.6421695936,1.585)); +#157808 = DIRECTION('',(0.,0.,-1.)); +#157809 = DIRECTION('',(-0.981572544987,0.191089871338,0.)); +#157810 = ORIENTED_EDGE('',*,*,#157811,.T.); +#157811 = EDGE_CURVE('',#157803,#157812,#157814,.T.); +#157812 = VERTEX_POINT('',#157813); +#157813 = CARTESIAN_POINT('',(123.980062,-107.522253,1.585)); +#157814 = LINE('',#157815,#157816); +#157815 = CARTESIAN_POINT('',(123.862029,-107.578583,1.585)); +#157816 = VECTOR('',#157817,1.); +#157817 = DIRECTION('',(0.902492723737,0.430705100506,0.)); +#157818 = ORIENTED_EDGE('',*,*,#157819,.T.); +#157819 = EDGE_CURVE('',#157812,#157820,#157822,.T.); +#157820 = VERTEX_POINT('',#157821); +#157821 = CARTESIAN_POINT('',(124.013078,-107.517814,1.585)); +#157822 = LINE('',#157823,#157824); +#157823 = CARTESIAN_POINT('',(123.980062,-107.522253,1.585)); +#157824 = VECTOR('',#157825,1.); +#157825 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157826 = ORIENTED_EDGE('',*,*,#157827,.T.); +#157827 = EDGE_CURVE('',#157820,#157828,#157830,.T.); +#157828 = VERTEX_POINT('',#157829); +#157829 = CARTESIAN_POINT('',(124.294607,-107.520216,1.585)); +#157830 = LINE('',#157831,#157832); +#157831 = CARTESIAN_POINT('',(124.013078,-107.517814,1.585)); +#157832 = VECTOR('',#157833,1.); +#157833 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#157834 = ORIENTED_EDGE('',*,*,#157835,.T.); +#157835 = EDGE_CURVE('',#157828,#157836,#157838,.T.); +#157836 = VERTEX_POINT('',#157837); +#157837 = CARTESIAN_POINT('',(124.326123,-107.531011,1.585)); +#157838 = LINE('',#157839,#157840); +#157839 = CARTESIAN_POINT('',(124.294607,-107.520216,1.585)); +#157840 = VECTOR('',#157841,1.); +#157841 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#157842 = ORIENTED_EDGE('',*,*,#157843,.T.); +#157843 = EDGE_CURVE('',#157836,#157844,#157846,.T.); +#157844 = VERTEX_POINT('',#157845); +#157845 = CARTESIAN_POINT('',(124.518288,-107.629779,1.585)); +#157846 = LINE('',#157847,#157848); +#157847 = CARTESIAN_POINT('',(124.326123,-107.531011,1.585)); +#157848 = VECTOR('',#157849,1.); +#157849 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#157850 = ORIENTED_EDGE('',*,*,#157851,.T.); +#157851 = EDGE_CURVE('',#157844,#157852,#157854,.T.); +#157852 = VERTEX_POINT('',#157853); +#157853 = CARTESIAN_POINT('',(124.527363,-107.640242,1.585)); +#157854 = LINE('',#157855,#157856); +#157855 = CARTESIAN_POINT('',(124.518288,-107.629779,1.585)); +#157856 = VECTOR('',#157857,1.); +#157857 = DIRECTION('',(0.655221858268,-0.755436507225,0.)); +#157858 = ORIENTED_EDGE('',*,*,#157859,.T.); +#157859 = EDGE_CURVE('',#157852,#157597,#157860,.T.); +#157860 = LINE('',#157861,#157862); +#157861 = CARTESIAN_POINT('',(124.527363,-107.640242,1.585)); +#157862 = VECTOR('',#157863,1.); +#157863 = DIRECTION('',(0.785133470575,0.619326596703,0.)); +#157864 = PLANE('',#157865); +#157865 = AXIS2_PLACEMENT_3D('',#157866,#157867,#157868); +#157866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157867 = DIRECTION('',(0.,0.,1.)); +#157868 = DIRECTION('',(1.,0.,-0.)); +#157869 = SHELL_BASED_SURFACE_MODEL('',(#157870)); +#157870 = OPEN_SHELL('',(#157871)); +#157871 = ADVANCED_FACE('',(#157872),#157924,.T.); +#157872 = FACE_BOUND('',#157873,.F.); +#157873 = EDGE_LOOP('',(#157874,#157885,#157893,#157902,#157910,#157918) + ); +#157874 = ORIENTED_EDGE('',*,*,#157875,.T.); +#157875 = EDGE_CURVE('',#157876,#157878,#157880,.T.); +#157876 = VERTEX_POINT('',#157877); +#157877 = CARTESIAN_POINT('',(133.029346,-107.53888,1.585)); +#157878 = VERTEX_POINT('',#157879); +#157879 = CARTESIAN_POINT('',(133.22139,-107.618428,1.585)); +#157880 = CIRCLE('',#157881,0.124999692383); +#157881 = AXIS2_PLACEMENT_3D('',#157882,#157883,#157884); +#157882 = CARTESIAN_POINT('',(133.098792,-107.642813518,1.585)); +#157883 = DIRECTION('',(0.,0.,-1.)); +#157884 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#157885 = ORIENTED_EDGE('',*,*,#157886,.T.); +#157886 = EDGE_CURVE('',#157878,#157887,#157889,.T.); +#157887 = VERTEX_POINT('',#157888); +#157888 = CARTESIAN_POINT('',(133.22139,-108.8672,1.585)); +#157889 = LINE('',#157890,#157891); +#157890 = CARTESIAN_POINT('',(133.22139,-107.618428,1.585)); +#157891 = VECTOR('',#157892,1.); +#157892 = DIRECTION('',(0.,-1.,0.)); +#157893 = ORIENTED_EDGE('',*,*,#157894,.T.); +#157894 = EDGE_CURVE('',#157887,#157895,#157897,.T.); +#157895 = VERTEX_POINT('',#157896); +#157896 = CARTESIAN_POINT('',(132.976194,-108.8672,1.585)); +#157897 = CIRCLE('',#157898,0.1249997864); +#157898 = AXIS2_PLACEMENT_3D('',#157899,#157900,#157901); +#157899 = CARTESIAN_POINT('',(133.098792,-108.842814,1.585)); +#157900 = DIRECTION('',(-0.,0.,-1.)); +#157901 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#157902 = ORIENTED_EDGE('',*,*,#157903,.T.); +#157903 = EDGE_CURVE('',#157895,#157904,#157906,.T.); +#157904 = VERTEX_POINT('',#157905); +#157905 = CARTESIAN_POINT('',(132.976194,-107.618428,1.585)); +#157906 = LINE('',#157907,#157908); +#157907 = CARTESIAN_POINT('',(132.976194,-108.8672,1.585)); +#157908 = VECTOR('',#157909,1.); +#157909 = DIRECTION('',(0.,1.,0.)); +#157910 = ORIENTED_EDGE('',*,*,#157911,.T.); +#157911 = EDGE_CURVE('',#157904,#157912,#157914,.T.); +#157912 = VERTEX_POINT('',#157913); +#157913 = CARTESIAN_POINT('',(132.994858,-107.573368,1.585)); +#157914 = LINE('',#157915,#157916); +#157915 = CARTESIAN_POINT('',(132.976194,-107.618428,1.585)); +#157916 = VECTOR('',#157917,1.); +#157917 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#157918 = ORIENTED_EDGE('',*,*,#157919,.T.); +#157919 = EDGE_CURVE('',#157912,#157876,#157920,.T.); +#157920 = LINE('',#157921,#157922); +#157921 = CARTESIAN_POINT('',(132.994858,-107.573368,1.585)); +#157922 = VECTOR('',#157923,1.); +#157923 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#157924 = PLANE('',#157925); +#157925 = AXIS2_PLACEMENT_3D('',#157926,#157927,#157928); +#157926 = CARTESIAN_POINT('',(0.,0.,1.585)); +#157927 = DIRECTION('',(0.,0.,1.)); +#157928 = DIRECTION('',(1.,0.,-0.)); +#157929 = SHELL_BASED_SURFACE_MODEL('',(#157930)); +#157930 = OPEN_SHELL('',(#157931)); +#157931 = ADVANCED_FACE('',(#157932),#158203,.T.); +#157932 = FACE_BOUND('',#157933,.F.); +#157933 = EDGE_LOOP('',(#157934,#157944,#157952,#157960,#157968,#157976, + #157984,#157992,#158000,#158008,#158017,#158025,#158033,#158042, + #158050,#158058,#158067,#158075,#158083,#158091,#158099,#158107, + #158115,#158123,#158132,#158140,#158149,#158157,#158165,#158173, + #158181,#158189,#158197)); +#157934 = ORIENTED_EDGE('',*,*,#157935,.T.); +#157935 = EDGE_CURVE('',#157936,#157938,#157940,.T.); +#157936 = VERTEX_POINT('',#157937); +#157937 = CARTESIAN_POINT('',(134.757176,-107.616725,1.585)); +#157938 = VERTEX_POINT('',#157939); +#157939 = CARTESIAN_POINT('',(134.95149,-107.522253,1.585)); +#157940 = LINE('',#157941,#157942); +#157941 = CARTESIAN_POINT('',(134.757176,-107.616725,1.585)); +#157942 = VECTOR('',#157943,1.); +#157943 = DIRECTION('',(0.899342728855,0.437244389392,0.)); +#157944 = ORIENTED_EDGE('',*,*,#157945,.T.); +#157945 = EDGE_CURVE('',#157938,#157946,#157948,.T.); +#157946 = VERTEX_POINT('',#157947); +#157947 = CARTESIAN_POINT('',(134.984506,-107.517814,1.585)); +#157948 = LINE('',#157949,#157950); +#157949 = CARTESIAN_POINT('',(134.95149,-107.522253,1.585)); +#157950 = VECTOR('',#157951,1.); +#157951 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#157952 = ORIENTED_EDGE('',*,*,#157953,.T.); +#157953 = EDGE_CURVE('',#157946,#157954,#157956,.T.); +#157954 = VERTEX_POINT('',#157955); +#157955 = CARTESIAN_POINT('',(135.266035,-107.520216,1.585)); +#157956 = LINE('',#157957,#157958); +#157957 = CARTESIAN_POINT('',(134.984506,-107.517814,1.585)); +#157958 = VECTOR('',#157959,1.); +#157959 = DIRECTION('',(0.99996360464,-8.53167019507E-03,0.)); +#157960 = ORIENTED_EDGE('',*,*,#157961,.T.); +#157961 = EDGE_CURVE('',#157954,#157962,#157964,.T.); +#157962 = VERTEX_POINT('',#157963); +#157963 = CARTESIAN_POINT('',(135.29755,-107.53101,1.585)); +#157964 = LINE('',#157965,#157966); +#157965 = CARTESIAN_POINT('',(135.266035,-107.520216,1.585)); +#157966 = VECTOR('',#157967,1.); +#157967 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#157968 = ORIENTED_EDGE('',*,*,#157969,.T.); +#157969 = EDGE_CURVE('',#157962,#157970,#157972,.T.); +#157970 = VERTEX_POINT('',#157971); +#157971 = CARTESIAN_POINT('',(135.489717,-107.629778,1.585)); +#157972 = LINE('',#157973,#157974); +#157973 = CARTESIAN_POINT('',(135.29755,-107.53101,1.585)); +#157974 = VECTOR('',#157975,1.); +#157975 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#157976 = ORIENTED_EDGE('',*,*,#157977,.T.); +#157977 = EDGE_CURVE('',#157970,#157978,#157980,.T.); +#157978 = VERTEX_POINT('',#157979); +#157979 = CARTESIAN_POINT('',(135.522315,-107.668549,1.585)); +#157980 = LINE('',#157981,#157982); +#157981 = CARTESIAN_POINT('',(135.489717,-107.629778,1.585)); +#157982 = VECTOR('',#157983,1.); +#157983 = DIRECTION('',(0.643543426558,-0.765409601543,0.)); +#157984 = ORIENTED_EDGE('',*,*,#157985,.T.); +#157985 = EDGE_CURVE('',#157978,#157986,#157988,.T.); +#157986 = VERTEX_POINT('',#157987); +#157987 = CARTESIAN_POINT('',(135.619353,-107.866941,1.585)); +#157988 = LINE('',#157989,#157990); +#157989 = CARTESIAN_POINT('',(135.522315,-107.668549,1.585)); +#157990 = VECTOR('',#157991,1.); +#157991 = DIRECTION('',(0.439379528383,-0.898301525123,0.)); +#157992 = ORIENTED_EDGE('',*,*,#157993,.T.); +#157993 = EDGE_CURVE('',#157986,#157994,#157996,.T.); +#157994 = VERTEX_POINT('',#157995); +#157995 = CARTESIAN_POINT('',(135.623792,-107.899957,1.585)); +#157996 = LINE('',#157997,#157998); +#157997 = CARTESIAN_POINT('',(135.619353,-107.866941,1.585)); +#157998 = VECTOR('',#157999,1.); +#157999 = DIRECTION('',(0.133250982623,-0.991082325355,0.)); +#158000 = ORIENTED_EDGE('',*,*,#158001,.T.); +#158001 = EDGE_CURVE('',#157994,#158002,#158004,.T.); +#158002 = VERTEX_POINT('',#158003); +#158003 = CARTESIAN_POINT('',(135.62139,-108.8672,1.585)); +#158004 = LINE('',#158005,#158006); +#158005 = CARTESIAN_POINT('',(135.623792,-107.899957,1.585)); +#158006 = VECTOR('',#158007,1.); +#158007 = DIRECTION('',(-2.483339340238E-03,-0.999996916508,0.)); +#158008 = ORIENTED_EDGE('',*,*,#158009,.T.); +#158009 = EDGE_CURVE('',#158002,#158010,#158012,.T.); +#158010 = VERTEX_POINT('',#158011); +#158011 = CARTESIAN_POINT('',(135.376194,-108.8672,1.585)); +#158012 = CIRCLE('',#158013,0.1249997864); +#158013 = AXIS2_PLACEMENT_3D('',#158014,#158015,#158016); +#158014 = CARTESIAN_POINT('',(135.498792,-108.842814,1.585)); +#158015 = DIRECTION('',(-0.,0.,-1.)); +#158016 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158017 = ORIENTED_EDGE('',*,*,#158018,.T.); +#158018 = EDGE_CURVE('',#158010,#158019,#158021,.T.); +#158019 = VERTEX_POINT('',#158020); +#158020 = CARTESIAN_POINT('',(135.373792,-107.929465,1.585)); +#158021 = LINE('',#158022,#158023); +#158022 = CARTESIAN_POINT('',(135.376194,-108.8672,1.585)); +#158023 = VECTOR('',#158024,1.); +#158024 = DIRECTION('',(-2.561482849613E-03,0.999996719397,0.)); +#158025 = ORIENTED_EDGE('',*,*,#158026,.T.); +#158026 = EDGE_CURVE('',#158019,#158027,#158029,.T.); +#158027 = VERTEX_POINT('',#158028); +#158028 = CARTESIAN_POINT('',(135.319908,-107.821697,1.585)); +#158029 = LINE('',#158030,#158031); +#158030 = CARTESIAN_POINT('',(135.373792,-107.929465,1.585)); +#158031 = VECTOR('',#158032,1.); +#158032 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#158033 = ORIENTED_EDGE('',*,*,#158034,.T.); +#158034 = EDGE_CURVE('',#158027,#158035,#158037,.T.); +#158035 = VERTEX_POINT('',#158036); +#158036 = CARTESIAN_POINT('',(134.906247,-107.821697,1.585)); +#158037 = CIRCLE('',#158038,0.347269293664); +#158038 = AXIS2_PLACEMENT_3D('',#158039,#158040,#158041); +#158039 = CARTESIAN_POINT('',(135.1130775,-108.1006541769,1.585)); +#158040 = DIRECTION('',(0.,0.,1.)); +#158041 = DIRECTION('',(0.595591098245,0.803287771407,-0.)); +#158042 = ORIENTED_EDGE('',*,*,#158043,.T.); +#158043 = EDGE_CURVE('',#158035,#158044,#158046,.T.); +#158044 = VERTEX_POINT('',#158045); +#158045 = CARTESIAN_POINT('',(134.852364,-107.929465,1.585)); +#158046 = LINE('',#158047,#158048); +#158047 = CARTESIAN_POINT('',(134.906247,-107.821697,1.585)); +#158048 = VECTOR('',#158049,1.); +#158049 = DIRECTION('',(-0.447206955814,-0.894430510812,0.)); +#158050 = ORIENTED_EDGE('',*,*,#158051,.T.); +#158051 = EDGE_CURVE('',#158044,#158052,#158054,.T.); +#158052 = VERTEX_POINT('',#158053); +#158053 = CARTESIAN_POINT('',(134.849962,-108.8672,1.585)); +#158054 = LINE('',#158055,#158056); +#158055 = CARTESIAN_POINT('',(134.852364,-107.929465,1.585)); +#158056 = VECTOR('',#158057,1.); +#158057 = DIRECTION('',(-2.561482849613E-03,-0.999996719397,0.)); +#158058 = ORIENTED_EDGE('',*,*,#158059,.T.); +#158059 = EDGE_CURVE('',#158052,#158060,#158062,.T.); +#158060 = VERTEX_POINT('',#158061); +#158061 = CARTESIAN_POINT('',(134.604766,-108.8672,1.585)); +#158062 = CIRCLE('',#158063,0.1249997864); +#158063 = AXIS2_PLACEMENT_3D('',#158064,#158065,#158066); +#158064 = CARTESIAN_POINT('',(134.727364,-108.842814,1.585)); +#158065 = DIRECTION('',(-0.,0.,-1.)); +#158066 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158067 = ORIENTED_EDGE('',*,*,#158068,.T.); +#158068 = EDGE_CURVE('',#158060,#158069,#158071,.T.); +#158069 = VERTEX_POINT('',#158070); +#158070 = CARTESIAN_POINT('',(134.602364,-107.929465,1.585)); +#158071 = LINE('',#158072,#158073); +#158072 = CARTESIAN_POINT('',(134.604766,-108.8672,1.585)); +#158073 = VECTOR('',#158074,1.); +#158074 = DIRECTION('',(-2.561482849643E-03,0.999996719397,0.)); +#158075 = ORIENTED_EDGE('',*,*,#158076,.T.); +#158076 = EDGE_CURVE('',#158069,#158077,#158079,.T.); +#158077 = VERTEX_POINT('',#158078); +#158078 = CARTESIAN_POINT('',(134.548479,-107.821697,1.585)); +#158079 = LINE('',#158080,#158081); +#158080 = CARTESIAN_POINT('',(134.602364,-107.929465,1.585)); +#158081 = VECTOR('',#158082,1.); +#158082 = DIRECTION('',(-0.447220235113,0.894423871163,0.)); +#158083 = ORIENTED_EDGE('',*,*,#158084,.T.); +#158084 = EDGE_CURVE('',#158077,#158085,#158087,.T.); +#158085 = VERTEX_POINT('',#158086); +#158086 = CARTESIAN_POINT('',(134.440713,-107.767814,1.585)); +#158087 = LINE('',#158088,#158089); +#158088 = CARTESIAN_POINT('',(134.548479,-107.821697,1.585)); +#158089 = VECTOR('',#158090,1.); +#158090 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#158091 = ORIENTED_EDGE('',*,*,#158092,.T.); +#158092 = EDGE_CURVE('',#158085,#158093,#158095,.T.); +#158093 = VERTEX_POINT('',#158094); +#158094 = CARTESIAN_POINT('',(134.242587,-107.767814,1.585)); +#158095 = LINE('',#158096,#158097); +#158096 = CARTESIAN_POINT('',(134.440713,-107.767814,1.585)); +#158097 = VECTOR('',#158098,1.); +#158098 = DIRECTION('',(-1.,0.,0.)); +#158099 = ORIENTED_EDGE('',*,*,#158100,.T.); +#158100 = EDGE_CURVE('',#158093,#158101,#158103,.T.); +#158101 = VERTEX_POINT('',#158102); +#158102 = CARTESIAN_POINT('',(134.115691,-107.831261,1.585)); +#158103 = LINE('',#158104,#158105); +#158104 = CARTESIAN_POINT('',(134.242587,-107.767814,1.585)); +#158105 = VECTOR('',#158106,1.); +#158106 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#158107 = ORIENTED_EDGE('',*,*,#158108,.T.); +#158108 = EDGE_CURVE('',#158101,#158109,#158111,.T.); +#158109 = VERTEX_POINT('',#158110); +#158110 = CARTESIAN_POINT('',(134.080935,-107.866018,1.585)); +#158111 = LINE('',#158112,#158113); +#158112 = CARTESIAN_POINT('',(134.115691,-107.831261,1.585)); +#158113 = VECTOR('',#158114,1.); +#158114 = DIRECTION('',(-0.707096608818,-0.707116953409,0.)); +#158115 = ORIENTED_EDGE('',*,*,#158116,.T.); +#158116 = EDGE_CURVE('',#158109,#158117,#158119,.T.); +#158117 = VERTEX_POINT('',#158118); +#158118 = CARTESIAN_POINT('',(134.078533,-108.8672,1.585)); +#158119 = LINE('',#158120,#158121); +#158120 = CARTESIAN_POINT('',(134.080935,-107.866018,1.585)); +#158121 = VECTOR('',#158122,1.); +#158122 = DIRECTION('',(-2.399157283196E-03,-0.999997122018,0.)); +#158123 = ORIENTED_EDGE('',*,*,#158124,.T.); +#158124 = EDGE_CURVE('',#158117,#158125,#158127,.T.); +#158125 = VERTEX_POINT('',#158126); +#158126 = CARTESIAN_POINT('',(133.833337,-108.8672,1.585)); +#158127 = CIRCLE('',#158128,0.1249997864); +#158128 = AXIS2_PLACEMENT_3D('',#158129,#158130,#158131); +#158129 = CARTESIAN_POINT('',(133.955935,-108.842814,1.585)); +#158130 = DIRECTION('',(-0.,0.,-1.)); +#158131 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158132 = ORIENTED_EDGE('',*,*,#158133,.T.); +#158133 = EDGE_CURVE('',#158125,#158134,#158136,.T.); +#158134 = VERTEX_POINT('',#158135); +#158135 = CARTESIAN_POINT('',(133.833337,-107.618428,1.585)); +#158136 = LINE('',#158137,#158138); +#158137 = CARTESIAN_POINT('',(133.833337,-108.8672,1.585)); +#158138 = VECTOR('',#158139,1.); +#158139 = DIRECTION('',(0.,1.,0.)); +#158140 = ORIENTED_EDGE('',*,*,#158141,.T.); +#158141 = EDGE_CURVE('',#158134,#158142,#158144,.T.); +#158142 = VERTEX_POINT('',#158143); +#158143 = CARTESIAN_POINT('',(134.062029,-107.578583,1.585)); +#158144 = CIRCLE('',#158145,0.124243077393); +#158145 = AXIS2_PLACEMENT_3D('',#158146,#158147,#158148); +#158146 = CARTESIAN_POINT('',(133.95529059367,-107.6421695936,1.585)); +#158147 = DIRECTION('',(0.,0.,-1.)); +#158148 = DIRECTION('',(-0.981572544987,0.191089871338,0.)); +#158149 = ORIENTED_EDGE('',*,*,#158150,.T.); +#158150 = EDGE_CURVE('',#158142,#158151,#158153,.T.); +#158151 = VERTEX_POINT('',#158152); +#158152 = CARTESIAN_POINT('',(134.180062,-107.522253,1.585)); +#158153 = LINE('',#158154,#158155); +#158154 = CARTESIAN_POINT('',(134.062029,-107.578583,1.585)); +#158155 = VECTOR('',#158156,1.); +#158156 = DIRECTION('',(0.902492723737,0.430705100506,0.)); +#158157 = ORIENTED_EDGE('',*,*,#158158,.T.); +#158158 = EDGE_CURVE('',#158151,#158159,#158161,.T.); +#158159 = VERTEX_POINT('',#158160); +#158160 = CARTESIAN_POINT('',(134.213078,-107.517814,1.585)); +#158161 = LINE('',#158162,#158163); +#158162 = CARTESIAN_POINT('',(134.180062,-107.522253,1.585)); +#158163 = VECTOR('',#158164,1.); +#158164 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#158165 = ORIENTED_EDGE('',*,*,#158166,.T.); +#158166 = EDGE_CURVE('',#158159,#158167,#158169,.T.); +#158167 = VERTEX_POINT('',#158168); +#158168 = CARTESIAN_POINT('',(134.494607,-107.520216,1.585)); +#158169 = LINE('',#158170,#158171); +#158170 = CARTESIAN_POINT('',(134.213078,-107.517814,1.585)); +#158171 = VECTOR('',#158172,1.); +#158172 = DIRECTION('',(0.99996360464,-8.531670195069E-03,0.)); +#158173 = ORIENTED_EDGE('',*,*,#158174,.T.); +#158174 = EDGE_CURVE('',#158167,#158175,#158177,.T.); +#158175 = VERTEX_POINT('',#158176); +#158176 = CARTESIAN_POINT('',(134.526123,-107.531011,1.585)); +#158177 = LINE('',#158178,#158179); +#158178 = CARTESIAN_POINT('',(134.494607,-107.520216,1.585)); +#158179 = VECTOR('',#158180,1.); +#158180 = DIRECTION('',(0.94604246983,-0.324042659659,0.)); +#158181 = ORIENTED_EDGE('',*,*,#158182,.T.); +#158182 = EDGE_CURVE('',#158175,#158183,#158185,.T.); +#158183 = VERTEX_POINT('',#158184); +#158184 = CARTESIAN_POINT('',(134.718288,-107.629779,1.585)); +#158185 = LINE('',#158186,#158187); +#158186 = CARTESIAN_POINT('',(134.526123,-107.531011,1.585)); +#158187 = VECTOR('',#158188,1.); +#158188 = DIRECTION('',(0.889400181667,-0.457129431181,0.)); +#158189 = ORIENTED_EDGE('',*,*,#158190,.T.); +#158190 = EDGE_CURVE('',#158183,#158191,#158193,.T.); +#158191 = VERTEX_POINT('',#158192); +#158192 = CARTESIAN_POINT('',(134.727363,-107.640242,1.585)); +#158193 = LINE('',#158194,#158195); +#158194 = CARTESIAN_POINT('',(134.718288,-107.629779,1.585)); +#158195 = VECTOR('',#158196,1.); +#158196 = DIRECTION('',(0.655221858268,-0.755436507225,0.)); +#158197 = ORIENTED_EDGE('',*,*,#158198,.T.); +#158198 = EDGE_CURVE('',#158191,#157936,#158199,.T.); +#158199 = LINE('',#158200,#158201); +#158200 = CARTESIAN_POINT('',(134.727363,-107.640242,1.585)); +#158201 = VECTOR('',#158202,1.); +#158202 = DIRECTION('',(0.785133470574,0.619326596703,0.)); +#158203 = PLANE('',#158204); +#158204 = AXIS2_PLACEMENT_3D('',#158205,#158206,#158207); +#158205 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158206 = DIRECTION('',(0.,0.,1.)); +#158207 = DIRECTION('',(1.,0.,-0.)); +#158208 = SHELL_BASED_SURFACE_MODEL('',(#158209)); +#158209 = OPEN_SHELL('',(#158210)); +#158210 = ADVANCED_FACE('',(#158211),#158280,.T.); +#158211 = FACE_BOUND('',#158212,.F.); +#158212 = EDGE_LOOP('',(#158213,#158224,#158232,#158241,#158249,#158257, + #158266,#158274)); +#158213 = ORIENTED_EDGE('',*,*,#158214,.T.); +#158214 = EDGE_CURVE('',#158215,#158217,#158219,.T.); +#158215 = VERTEX_POINT('',#158216); +#158216 = CARTESIAN_POINT('',(141.988691,-107.165412,1.585)); +#158217 = VERTEX_POINT('',#158218); +#158218 = CARTESIAN_POINT('',(141.988691,-106.920216,1.585)); +#158219 = CIRCLE('',#158220,0.1249997864); +#158220 = AXIS2_PLACEMENT_3D('',#158221,#158222,#158223); +#158221 = CARTESIAN_POINT('',(142.013077,-107.042814,1.585)); +#158222 = DIRECTION('',(0.,0.,-1.)); +#158223 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#158224 = ORIENTED_EDGE('',*,*,#158225,.T.); +#158225 = EDGE_CURVE('',#158217,#158226,#158228,.T.); +#158226 = VERTEX_POINT('',#158227); +#158227 = CARTESIAN_POINT('',(143.066035,-106.920216,1.585)); +#158228 = LINE('',#158229,#158230); +#158229 = CARTESIAN_POINT('',(141.988691,-106.920216,1.585)); +#158230 = VECTOR('',#158231,1.); +#158231 = DIRECTION('',(1.,0.,0.)); +#158232 = ORIENTED_EDGE('',*,*,#158233,.T.); +#158233 = EDGE_CURVE('',#158226,#158234,#158236,.T.); +#158234 = VERTEX_POINT('',#158235); +#158235 = CARTESIAN_POINT('',(143.066035,-107.165412,1.585)); +#158236 = CIRCLE('',#158237,0.1249997864); +#158237 = AXIS2_PLACEMENT_3D('',#158238,#158239,#158240); +#158238 = CARTESIAN_POINT('',(143.041649,-107.042814,1.585)); +#158239 = DIRECTION('',(0.,0.,-1.)); +#158240 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#158241 = ORIENTED_EDGE('',*,*,#158242,.T.); +#158242 = EDGE_CURVE('',#158234,#158243,#158245,.T.); +#158243 = VERTEX_POINT('',#158244); +#158244 = CARTESIAN_POINT('',(142.652363,-107.167814,1.585)); +#158245 = LINE('',#158246,#158247); +#158246 = CARTESIAN_POINT('',(143.066035,-107.165412,1.585)); +#158247 = VECTOR('',#158248,1.); +#158248 = DIRECTION('',(-0.999983142515,-5.806434828379E-03,0.)); +#158249 = ORIENTED_EDGE('',*,*,#158250,.T.); +#158250 = EDGE_CURVE('',#158243,#158251,#158253,.T.); +#158251 = VERTEX_POINT('',#158252); +#158252 = CARTESIAN_POINT('',(142.649961,-108.8672,1.585)); +#158253 = LINE('',#158254,#158255); +#158254 = CARTESIAN_POINT('',(142.652363,-107.167814,1.585)); +#158255 = VECTOR('',#158256,1.); +#158256 = DIRECTION('',(-1.413450270044E-03,-0.999999001079,0.)); +#158257 = ORIENTED_EDGE('',*,*,#158258,.T.); +#158258 = EDGE_CURVE('',#158251,#158259,#158261,.T.); +#158259 = VERTEX_POINT('',#158260); +#158260 = CARTESIAN_POINT('',(142.404765,-108.8672,1.585)); +#158261 = CIRCLE('',#158262,0.1249997864); +#158262 = AXIS2_PLACEMENT_3D('',#158263,#158264,#158265); +#158263 = CARTESIAN_POINT('',(142.527363,-108.842814,1.585)); +#158264 = DIRECTION('',(-0.,0.,-1.)); +#158265 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158266 = ORIENTED_EDGE('',*,*,#158267,.T.); +#158267 = EDGE_CURVE('',#158259,#158268,#158270,.T.); +#158268 = VERTEX_POINT('',#158269); +#158269 = CARTESIAN_POINT('',(142.402363,-107.167814,1.585)); +#158270 = LINE('',#158271,#158272); +#158271 = CARTESIAN_POINT('',(142.404765,-108.8672,1.585)); +#158272 = VECTOR('',#158273,1.); +#158273 = DIRECTION('',(-1.413450270027E-03,0.999999001079,0.)); +#158274 = ORIENTED_EDGE('',*,*,#158275,.T.); +#158275 = EDGE_CURVE('',#158268,#158215,#158276,.T.); +#158276 = LINE('',#158277,#158278); +#158277 = CARTESIAN_POINT('',(142.402363,-107.167814,1.585)); +#158278 = VECTOR('',#158279,1.); +#158279 = DIRECTION('',(-0.999983142515,5.806434828378E-03,0.)); +#158280 = PLANE('',#158281); +#158281 = AXIS2_PLACEMENT_3D('',#158282,#158283,#158284); +#158282 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158283 = DIRECTION('',(0.,0.,1.)); +#158284 = DIRECTION('',(1.,0.,-0.)); +#158285 = SHELL_BASED_SURFACE_MODEL('',(#158286)); +#158286 = OPEN_SHELL('',(#158287)); +#158287 = ADVANCED_FACE('',(#158288),#158494,.T.); +#158288 = FACE_BOUND('',#158289,.F.); +#158289 = EDGE_LOOP('',(#158290,#158300,#158308,#158316,#158324,#158332, + #158340,#158348,#158356,#158364,#158372,#158380,#158388,#158396, + #158405,#158413,#158422,#158430,#158438,#158446,#158455,#158463, + #158471,#158479,#158488)); +#158290 = ORIENTED_EDGE('',*,*,#158291,.T.); +#158291 = EDGE_CURVE('',#158292,#158294,#158296,.T.); +#158292 = VERTEX_POINT('',#158293); +#158293 = CARTESIAN_POINT('',(145.372203,-107.024595,1.585)); +#158294 = VERTEX_POINT('',#158295); +#158295 = CARTESIAN_POINT('',(145.580062,-106.922253,1.585)); +#158296 = LINE('',#158297,#158298); +#158297 = CARTESIAN_POINT('',(145.372203,-107.024595,1.585)); +#158298 = VECTOR('',#158299,1.); +#158299 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#158300 = ORIENTED_EDGE('',*,*,#158301,.T.); +#158301 = EDGE_CURVE('',#158294,#158302,#158304,.T.); +#158302 = VERTEX_POINT('',#158303); +#158303 = CARTESIAN_POINT('',(145.613078,-106.917814,1.585)); +#158304 = LINE('',#158305,#158306); +#158305 = CARTESIAN_POINT('',(145.580062,-106.922253,1.585)); +#158306 = VECTOR('',#158307,1.); +#158307 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#158308 = ORIENTED_EDGE('',*,*,#158309,.T.); +#158309 = EDGE_CURVE('',#158302,#158310,#158312,.T.); +#158310 = VERTEX_POINT('',#158311); +#158311 = CARTESIAN_POINT('',(146.066035,-106.920216,1.585)); +#158312 = LINE('',#158313,#158314); +#158313 = CARTESIAN_POINT('',(145.613078,-106.917814,1.585)); +#158314 = VECTOR('',#158315,1.); +#158315 = DIRECTION('',(0.999985939755,-5.302857064313E-03,0.)); +#158316 = ORIENTED_EDGE('',*,*,#158317,.T.); +#158317 = EDGE_CURVE('',#158310,#158318,#158320,.T.); +#158318 = VERTEX_POINT('',#158319); +#158319 = CARTESIAN_POINT('',(146.09755,-106.93101,1.585)); +#158320 = LINE('',#158321,#158322); +#158321 = CARTESIAN_POINT('',(146.066035,-106.920216,1.585)); +#158322 = VECTOR('',#158323,1.); +#158323 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#158324 = ORIENTED_EDGE('',*,*,#158325,.T.); +#158325 = EDGE_CURVE('',#158318,#158326,#158328,.T.); +#158326 = VERTEX_POINT('',#158327); +#158327 = CARTESIAN_POINT('',(146.289717,-107.029778,1.585)); +#158328 = LINE('',#158329,#158330); +#158329 = CARTESIAN_POINT('',(146.09755,-106.93101,1.585)); +#158330 = VECTOR('',#158331,1.); +#158331 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#158332 = ORIENTED_EDGE('',*,*,#158333,.T.); +#158333 = EDGE_CURVE('',#158326,#158334,#158336,.T.); +#158334 = VERTEX_POINT('',#158335); +#158335 = CARTESIAN_POINT('',(146.402725,-107.144796,1.585)); +#158336 = LINE('',#158337,#158338); +#158337 = CARTESIAN_POINT('',(146.289717,-107.029778,1.585)); +#158338 = VECTOR('',#158339,1.); +#158339 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#158340 = ORIENTED_EDGE('',*,*,#158341,.T.); +#158341 = EDGE_CURVE('',#158334,#158342,#158344,.T.); +#158342 = VERTEX_POINT('',#158343); +#158343 = CARTESIAN_POINT('',(146.505067,-107.352655,1.585)); +#158344 = LINE('',#158345,#158346); +#158345 = CARTESIAN_POINT('',(146.402725,-107.144796,1.585)); +#158346 = VECTOR('',#158347,1.); +#158347 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#158348 = ORIENTED_EDGE('',*,*,#158349,.T.); +#158349 = EDGE_CURVE('',#158342,#158350,#158352,.T.); +#158350 = VERTEX_POINT('',#158351); +#158351 = CARTESIAN_POINT('',(146.509506,-107.385671,1.585)); +#158352 = LINE('',#158353,#158354); +#158353 = CARTESIAN_POINT('',(146.505067,-107.352655,1.585)); +#158354 = VECTOR('',#158355,1.); +#158355 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#158356 = ORIENTED_EDGE('',*,*,#158357,.T.); +#158357 = EDGE_CURVE('',#158350,#158358,#158360,.T.); +#158358 = VERTEX_POINT('',#158359); +#158359 = CARTESIAN_POINT('',(146.507104,-107.581486,1.585)); +#158360 = LINE('',#158361,#158362); +#158361 = CARTESIAN_POINT('',(146.509506,-107.385671,1.585)); +#158362 = VECTOR('',#158363,1.); +#158363 = DIRECTION('',(-1.226575749649E-02,-0.999924772767,0.)); +#158364 = ORIENTED_EDGE('',*,*,#158365,.T.); +#158365 = EDGE_CURVE('',#158358,#158366,#158368,.T.); +#158366 = VERTEX_POINT('',#158367); +#158367 = CARTESIAN_POINT('',(146.407387,-107.876145,1.585)); +#158368 = LINE('',#158369,#158370); +#158369 = CARTESIAN_POINT('',(146.507104,-107.581486,1.585)); +#158370 = VECTOR('',#158371,1.); +#158371 = DIRECTION('',(-0.320556548827,-0.947229380353,0.)); +#158372 = ORIENTED_EDGE('',*,*,#158373,.T.); +#158373 = EDGE_CURVE('',#158366,#158374,#158376,.T.); +#158374 = VERTEX_POINT('',#158375); +#158375 = CARTESIAN_POINT('',(146.38718,-107.902631,1.585)); +#158376 = LINE('',#158377,#158378); +#158377 = CARTESIAN_POINT('',(146.407387,-107.876145,1.585)); +#158378 = VECTOR('',#158379,1.); +#158379 = DIRECTION('',(-0.606559497005,-0.795038097574,0.)); +#158380 = ORIENTED_EDGE('',*,*,#158381,.T.); +#158381 = EDGE_CURVE('',#158374,#158382,#158384,.T.); +#158382 = VERTEX_POINT('',#158383); +#158383 = CARTESIAN_POINT('',(145.571996,-108.717814,1.585)); +#158384 = LINE('',#158385,#158386); +#158385 = CARTESIAN_POINT('',(146.38718,-107.902631,1.585)); +#158386 = VECTOR('',#158387,1.); +#158387 = DIRECTION('',(-0.707107214897,-0.707106347476,0.)); +#158388 = ORIENTED_EDGE('',*,*,#158389,.T.); +#158389 = EDGE_CURVE('',#158382,#158390,#158392,.T.); +#158390 = VERTEX_POINT('',#158391); +#158391 = CARTESIAN_POINT('',(146.408892,-108.720216,1.585)); +#158392 = LINE('',#158393,#158394); +#158393 = CARTESIAN_POINT('',(145.571996,-108.717814,1.585)); +#158394 = VECTOR('',#158395,1.); +#158395 = DIRECTION('',(0.999995881203,-2.870117800348E-03,0.)); +#158396 = ORIENTED_EDGE('',*,*,#158397,.T.); +#158397 = EDGE_CURVE('',#158390,#158398,#158400,.T.); +#158398 = VERTEX_POINT('',#158399); +#158399 = CARTESIAN_POINT('',(146.408892,-108.965412,1.585)); +#158400 = CIRCLE('',#158401,0.1249997864); +#158401 = AXIS2_PLACEMENT_3D('',#158402,#158403,#158404); +#158402 = CARTESIAN_POINT('',(146.384506,-108.842814,1.585)); +#158403 = DIRECTION('',(0.,0.,-1.)); +#158404 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#158405 = ORIENTED_EDGE('',*,*,#158406,.T.); +#158406 = EDGE_CURVE('',#158398,#158407,#158409,.T.); +#158407 = VERTEX_POINT('',#158408); +#158408 = CARTESIAN_POINT('',(145.245833,-108.965412,1.585)); +#158409 = LINE('',#158410,#158411); +#158410 = CARTESIAN_POINT('',(146.408892,-108.965412,1.585)); +#158411 = VECTOR('',#158412,1.); +#158412 = DIRECTION('',(-1.,0.,0.)); +#158413 = ORIENTED_EDGE('',*,*,#158414,.T.); +#158414 = EDGE_CURVE('',#158407,#158415,#158417,.T.); +#158415 = VERTEX_POINT('',#158416); +#158416 = CARTESIAN_POINT('',(145.166291,-108.773362,1.585)); +#158417 = CIRCLE('',#158418,0.124999123629); +#158418 = AXIS2_PLACEMENT_3D('',#158419,#158420,#158421); +#158419 = CARTESIAN_POINT('',(145.27021932933,-108.8428147412,1.585)); +#158420 = DIRECTION('',(0.,0.,-1.)); +#158421 = DIRECTION('',(-0.195092002484,-0.980784946136,-0.)); +#158422 = ORIENTED_EDGE('',*,*,#158423,.T.); +#158423 = EDGE_CURVE('',#158415,#158424,#158426,.T.); +#158424 = VERTEX_POINT('',#158425); +#158425 = CARTESIAN_POINT('',(146.189538,-107.746718,1.585)); +#158426 = LINE('',#158427,#158428); +#158427 = CARTESIAN_POINT('',(145.166291,-108.773362,1.585)); +#158428 = VECTOR('',#158429,1.); +#158429 = DIRECTION('',(0.705934021894,0.708277598638,0.)); +#158430 = ORIENTED_EDGE('',*,*,#158431,.T.); +#158431 = EDGE_CURVE('',#158424,#158432,#158434,.T.); +#158432 = VERTEX_POINT('',#158433); +#158433 = CARTESIAN_POINT('',(146.259506,-107.536814,1.585)); +#158434 = LINE('',#158435,#158436); +#158435 = CARTESIAN_POINT('',(146.189538,-107.746718,1.585)); +#158436 = VECTOR('',#158437,1.); +#158437 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#158438 = ORIENTED_EDGE('',*,*,#158439,.T.); +#158439 = EDGE_CURVE('',#158432,#158440,#158442,.T.); +#158440 = VERTEX_POINT('',#158441); +#158441 = CARTESIAN_POINT('',(146.259506,-107.415179,1.585)); +#158442 = LINE('',#158443,#158444); +#158443 = CARTESIAN_POINT('',(146.259506,-107.536814,1.585)); +#158444 = VECTOR('',#158445,1.); +#158445 = DIRECTION('',(0.,1.,0.)); +#158446 = ORIENTED_EDGE('',*,*,#158447,.T.); +#158447 = EDGE_CURVE('',#158440,#158448,#158450,.T.); +#158448 = VERTEX_POINT('',#158449); +#158449 = CARTESIAN_POINT('',(146.01214,-107.167814,1.585)); +#158450 = CIRCLE('',#158451,0.347631916063); +#158451 = AXIS2_PLACEMENT_3D('',#158452,#158453,#158454); +#158452 = CARTESIAN_POINT('',(145.92339331879,-107.5039270399,1.585)); +#158453 = DIRECTION('',(0.,0.,1.)); +#158454 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#158455 = ORIENTED_EDGE('',*,*,#158456,.T.); +#158456 = EDGE_CURVE('',#158448,#158457,#158459,.T.); +#158457 = VERTEX_POINT('',#158458); +#158458 = CARTESIAN_POINT('',(145.642587,-107.167814,1.585)); +#158459 = LINE('',#158460,#158461); +#158460 = CARTESIAN_POINT('',(146.01214,-107.167814,1.585)); +#158461 = VECTOR('',#158462,1.); +#158462 = DIRECTION('',(-1.,0.,0.)); +#158463 = ORIENTED_EDGE('',*,*,#158464,.T.); +#158464 = EDGE_CURVE('',#158457,#158465,#158467,.T.); +#158465 = VERTEX_POINT('',#158466); +#158466 = CARTESIAN_POINT('',(145.515691,-107.231261,1.585)); +#158467 = LINE('',#158468,#158469); +#158468 = CARTESIAN_POINT('',(145.642587,-107.167814,1.585)); +#158469 = VECTOR('',#158470,1.); +#158470 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#158471 = ORIENTED_EDGE('',*,*,#158472,.T.); +#158472 = EDGE_CURVE('',#158465,#158473,#158475,.T.); +#158473 = VERTEX_POINT('',#158474); +#158474 = CARTESIAN_POINT('',(145.425381,-107.318175,1.585)); +#158475 = LINE('',#158476,#158477); +#158476 = CARTESIAN_POINT('',(145.515691,-107.231261,1.585)); +#158477 = VECTOR('',#158478,1.); +#158478 = DIRECTION('',(-0.7205242235,-0.693429768146,0.)); +#158479 = ORIENTED_EDGE('',*,*,#158480,.T.); +#158480 = EDGE_CURVE('',#158473,#158481,#158483,.T.); +#158481 = VERTEX_POINT('',#158482); +#158482 = CARTESIAN_POINT('',(145.252002,-107.144796,1.585)); +#158483 = CIRCLE('',#158484,0.124999261618); +#158484 = AXIS2_PLACEMENT_3D('',#158485,#158486,#158487); +#158485 = CARTESIAN_POINT('',(145.355935,-107.214242,1.585)); +#158486 = DIRECTION('',(0.,0.,-1.)); +#158487 = DIRECTION('',(0.555571281791,-0.831468911535,0.)); +#158488 = ORIENTED_EDGE('',*,*,#158489,.T.); +#158489 = EDGE_CURVE('',#158481,#158292,#158490,.T.); +#158490 = LINE('',#158491,#158492); +#158491 = CARTESIAN_POINT('',(145.252002,-107.144796,1.585)); +#158492 = VECTOR('',#158493,1.); +#158493 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158494 = PLANE('',#158495); +#158495 = AXIS2_PLACEMENT_3D('',#158496,#158497,#158498); +#158496 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158497 = DIRECTION('',(0.,0.,1.)); +#158498 = DIRECTION('',(1.,0.,-0.)); +#158499 = SHELL_BASED_SURFACE_MODEL('',(#158500)); +#158500 = OPEN_SHELL('',(#158501)); +#158501 = ADVANCED_FACE('',(#158502,#158642),#158694,.T.); +#158502 = FACE_BOUND('',#158503,.F.); +#158503 = EDGE_LOOP('',(#158504,#158515,#158523,#158531,#158539,#158547, + #158555,#158563,#158571,#158579,#158587,#158595,#158603,#158611, + #158619,#158627,#158636)); +#158504 = ORIENTED_EDGE('',*,*,#158505,.T.); +#158505 = EDGE_CURVE('',#158506,#158508,#158510,.T.); +#158506 = VERTEX_POINT('',#158507); +#158507 = CARTESIAN_POINT('',(150.204766,-107.018428,1.585)); +#158508 = VERTEX_POINT('',#158509); +#158509 = CARTESIAN_POINT('',(150.302978,-106.920216,1.585)); +#158510 = CIRCLE('',#158511,0.124998078635); +#158511 = AXIS2_PLACEMENT_3D('',#158512,#158513,#158514); +#158512 = CARTESIAN_POINT('',(150.32736254765,-107.0428125476,1.585)); +#158513 = DIRECTION('',(0.,0.,-1.)); +#158514 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#158515 = ORIENTED_EDGE('',*,*,#158516,.T.); +#158516 = EDGE_CURVE('',#158508,#158517,#158519,.T.); +#158517 = VERTEX_POINT('',#158518); +#158518 = CARTESIAN_POINT('',(151.037464,-106.920216,1.585)); +#158519 = LINE('',#158520,#158521); +#158520 = CARTESIAN_POINT('',(150.302978,-106.920216,1.585)); +#158521 = VECTOR('',#158522,1.); +#158522 = DIRECTION('',(1.,0.,0.)); +#158523 = ORIENTED_EDGE('',*,*,#158524,.T.); +#158524 = EDGE_CURVE('',#158517,#158525,#158527,.T.); +#158525 = VERTEX_POINT('',#158526); +#158526 = CARTESIAN_POINT('',(151.068979,-106.93101,1.585)); +#158527 = LINE('',#158528,#158529); +#158528 = CARTESIAN_POINT('',(151.037464,-106.920216,1.585)); +#158529 = VECTOR('',#158530,1.); +#158530 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#158531 = ORIENTED_EDGE('',*,*,#158532,.T.); +#158532 = EDGE_CURVE('',#158525,#158533,#158535,.T.); +#158533 = VERTEX_POINT('',#158534); +#158534 = CARTESIAN_POINT('',(151.261146,-107.029778,1.585)); +#158535 = LINE('',#158536,#158537); +#158536 = CARTESIAN_POINT('',(151.068979,-106.93101,1.585)); +#158537 = VECTOR('',#158538,1.); +#158538 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#158539 = ORIENTED_EDGE('',*,*,#158540,.T.); +#158540 = EDGE_CURVE('',#158533,#158541,#158543,.T.); +#158541 = VERTEX_POINT('',#158542); +#158542 = CARTESIAN_POINT('',(151.374154,-107.144796,1.585)); +#158543 = LINE('',#158544,#158545); +#158544 = CARTESIAN_POINT('',(151.261146,-107.029778,1.585)); +#158545 = VECTOR('',#158546,1.); +#158546 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#158547 = ORIENTED_EDGE('',*,*,#158548,.T.); +#158548 = EDGE_CURVE('',#158541,#158549,#158551,.T.); +#158549 = VERTEX_POINT('',#158550); +#158550 = CARTESIAN_POINT('',(151.476496,-107.352655,1.585)); +#158551 = LINE('',#158552,#158553); +#158552 = CARTESIAN_POINT('',(151.374154,-107.144796,1.585)); +#158553 = VECTOR('',#158554,1.); +#158554 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#158555 = ORIENTED_EDGE('',*,*,#158556,.T.); +#158556 = EDGE_CURVE('',#158549,#158557,#158559,.T.); +#158557 = VERTEX_POINT('',#158558); +#158558 = CARTESIAN_POINT('',(151.480935,-107.385671,1.585)); +#158559 = LINE('',#158560,#158561); +#158560 = CARTESIAN_POINT('',(151.476496,-107.352655,1.585)); +#158561 = VECTOR('',#158562,1.); +#158562 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#158563 = ORIENTED_EDGE('',*,*,#158564,.T.); +#158564 = EDGE_CURVE('',#158557,#158565,#158567,.T.); +#158565 = VERTEX_POINT('',#158566); +#158566 = CARTESIAN_POINT('',(151.478533,-107.6672,1.585)); +#158567 = LINE('',#158568,#158569); +#158568 = CARTESIAN_POINT('',(151.480935,-107.385671,1.585)); +#158569 = VECTOR('',#158570,1.); +#158570 = DIRECTION('',(-8.531670195019E-03,-0.99996360464,0.)); +#158571 = ORIENTED_EDGE('',*,*,#158572,.T.); +#158572 = EDGE_CURVE('',#158565,#158573,#158575,.T.); +#158573 = VERTEX_POINT('',#158574); +#158574 = CARTESIAN_POINT('',(151.467738,-107.698716,1.585)); +#158575 = LINE('',#158576,#158577); +#158576 = CARTESIAN_POINT('',(151.478533,-107.6672,1.585)); +#158577 = VECTOR('',#158578,1.); +#158578 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#158579 = ORIENTED_EDGE('',*,*,#158580,.T.); +#158580 = EDGE_CURVE('',#158573,#158581,#158583,.T.); +#158581 = VERTEX_POINT('',#158582); +#158582 = CARTESIAN_POINT('',(151.36897,-107.890881,1.585)); +#158583 = LINE('',#158584,#158585); +#158584 = CARTESIAN_POINT('',(151.467738,-107.698716,1.585)); +#158585 = VECTOR('',#158586,1.); +#158586 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#158587 = ORIENTED_EDGE('',*,*,#158588,.T.); +#158588 = EDGE_CURVE('',#158581,#158589,#158591,.T.); +#158589 = VERTEX_POINT('',#158590); +#158590 = CARTESIAN_POINT('',(151.253954,-108.00389,1.585)); +#158591 = LINE('',#158592,#158593); +#158592 = CARTESIAN_POINT('',(151.36897,-107.890881,1.585)); +#158593 = VECTOR('',#158594,1.); +#158594 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#158595 = ORIENTED_EDGE('',*,*,#158596,.T.); +#158596 = EDGE_CURVE('',#158589,#158597,#158599,.T.); +#158597 = VERTEX_POINT('',#158598); +#158598 = CARTESIAN_POINT('',(151.046094,-108.106232,1.585)); +#158599 = LINE('',#158600,#158601); +#158600 = CARTESIAN_POINT('',(151.253954,-108.00389,1.585)); +#158601 = VECTOR('',#158602,1.); +#158602 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#158603 = ORIENTED_EDGE('',*,*,#158604,.T.); +#158604 = EDGE_CURVE('',#158597,#158605,#158607,.T.); +#158605 = VERTEX_POINT('',#158606); +#158606 = CARTESIAN_POINT('',(151.013078,-108.110671,1.585)); +#158607 = LINE('',#158608,#158609); +#158608 = CARTESIAN_POINT('',(151.046094,-108.106232,1.585)); +#158609 = VECTOR('',#158610,1.); +#158610 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#158611 = ORIENTED_EDGE('',*,*,#158612,.T.); +#158612 = EDGE_CURVE('',#158605,#158613,#158615,.T.); +#158613 = VERTEX_POINT('',#158614); +#158614 = CARTESIAN_POINT('',(150.452364,-108.110671,1.585)); +#158615 = LINE('',#158616,#158617); +#158616 = CARTESIAN_POINT('',(151.013078,-108.110671,1.585)); +#158617 = VECTOR('',#158618,1.); +#158618 = DIRECTION('',(-1.,0.,0.)); +#158619 = ORIENTED_EDGE('',*,*,#158620,.T.); +#158620 = EDGE_CURVE('',#158613,#158621,#158623,.T.); +#158621 = VERTEX_POINT('',#158622); +#158622 = CARTESIAN_POINT('',(150.449962,-108.8672,1.585)); +#158623 = LINE('',#158624,#158625); +#158624 = CARTESIAN_POINT('',(150.452364,-108.110671,1.585)); +#158625 = VECTOR('',#158626,1.); +#158626 = DIRECTION('',(-3.175010995011E-03,-0.99999495964,0.)); +#158627 = ORIENTED_EDGE('',*,*,#158628,.T.); +#158628 = EDGE_CURVE('',#158621,#158629,#158631,.T.); +#158629 = VERTEX_POINT('',#158630); +#158630 = CARTESIAN_POINT('',(150.204766,-108.8672,1.585)); +#158631 = CIRCLE('',#158632,0.1249997864); +#158632 = AXIS2_PLACEMENT_3D('',#158633,#158634,#158635); +#158633 = CARTESIAN_POINT('',(150.327364,-108.842814,1.585)); +#158634 = DIRECTION('',(-0.,0.,-1.)); +#158635 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158636 = ORIENTED_EDGE('',*,*,#158637,.T.); +#158637 = EDGE_CURVE('',#158629,#158506,#158638,.T.); +#158638 = LINE('',#158639,#158640); +#158639 = CARTESIAN_POINT('',(150.204766,-108.8672,1.585)); +#158640 = VECTOR('',#158641,1.); +#158641 = DIRECTION('',(0.,1.,0.)); +#158642 = FACE_BOUND('',#158643,.F.); +#158643 = EDGE_LOOP('',(#158644,#158655,#158663,#158671,#158679,#158688) + ); +#158644 = ORIENTED_EDGE('',*,*,#158645,.T.); +#158645 = EDGE_CURVE('',#158646,#158648,#158650,.T.); +#158646 = VERTEX_POINT('',#158647); +#158647 = CARTESIAN_POINT('',(151.230935,-107.415179,1.585)); +#158648 = VERTEX_POINT('',#158649); +#158649 = CARTESIAN_POINT('',(150.983569,-107.167814,1.585)); +#158650 = CIRCLE('',#158651,0.347631916063); +#158651 = AXIS2_PLACEMENT_3D('',#158652,#158653,#158654); +#158652 = CARTESIAN_POINT('',(150.89482231879,-107.5039270399,1.585)); +#158653 = DIRECTION('',(0.,0.,1.)); +#158654 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#158655 = ORIENTED_EDGE('',*,*,#158656,.T.); +#158656 = EDGE_CURVE('',#158648,#158657,#158659,.T.); +#158657 = VERTEX_POINT('',#158658); +#158658 = CARTESIAN_POINT('',(150.452364,-107.167814,1.585)); +#158659 = LINE('',#158660,#158661); +#158660 = CARTESIAN_POINT('',(150.983569,-107.167814,1.585)); +#158661 = VECTOR('',#158662,1.); +#158662 = DIRECTION('',(-1.,0.,0.)); +#158663 = ORIENTED_EDGE('',*,*,#158664,.T.); +#158664 = EDGE_CURVE('',#158657,#158665,#158667,.T.); +#158665 = VERTEX_POINT('',#158666); +#158666 = CARTESIAN_POINT('',(150.452364,-107.860671,1.585)); +#158667 = LINE('',#158668,#158669); +#158668 = CARTESIAN_POINT('',(150.452364,-107.167814,1.585)); +#158669 = VECTOR('',#158670,1.); +#158670 = DIRECTION('',(0.,-1.,0.)); +#158671 = ORIENTED_EDGE('',*,*,#158672,.T.); +#158672 = EDGE_CURVE('',#158665,#158673,#158675,.T.); +#158673 = VERTEX_POINT('',#158674); +#158674 = CARTESIAN_POINT('',(150.983569,-107.860671,1.585)); +#158675 = LINE('',#158676,#158677); +#158676 = CARTESIAN_POINT('',(150.452364,-107.860671,1.585)); +#158677 = VECTOR('',#158678,1.); +#158678 = DIRECTION('',(1.,0.,0.)); +#158679 = ORIENTED_EDGE('',*,*,#158680,.T.); +#158680 = EDGE_CURVE('',#158673,#158681,#158683,.T.); +#158681 = VERTEX_POINT('',#158682); +#158682 = CARTESIAN_POINT('',(151.230935,-107.613305,1.585)); +#158683 = CIRCLE('',#158684,0.347641001424); +#158684 = AXIS2_PLACEMENT_3D('',#158685,#158686,#158687); +#158685 = CARTESIAN_POINT('',(150.89481460111,-107.5245506011,1.585)); +#158686 = DIRECTION('',(0.,0.,1.)); +#158687 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#158688 = ORIENTED_EDGE('',*,*,#158689,.T.); +#158689 = EDGE_CURVE('',#158681,#158646,#158690,.T.); +#158690 = LINE('',#158691,#158692); +#158691 = CARTESIAN_POINT('',(151.230935,-107.613305,1.585)); +#158692 = VECTOR('',#158693,1.); +#158693 = DIRECTION('',(0.,1.,0.)); +#158694 = PLANE('',#158695); +#158695 = AXIS2_PLACEMENT_3D('',#158696,#158697,#158698); +#158696 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158697 = DIRECTION('',(0.,0.,1.)); +#158698 = DIRECTION('',(1.,0.,-0.)); +#158699 = SHELL_BASED_SURFACE_MODEL('',(#158700)); +#158700 = OPEN_SHELL('',(#158701)); +#158701 = ADVANCED_FACE('',(#158702),#158788,.T.); +#158702 = FACE_BOUND('',#158703,.F.); +#158703 = EDGE_LOOP('',(#158704,#158715,#158723,#158731,#158739,#158748, + #158756,#158765,#158773,#158782)); +#158704 = ORIENTED_EDGE('',*,*,#158705,.T.); +#158705 = EDGE_CURVE('',#158706,#158708,#158710,.T.); +#158706 = VERTEX_POINT('',#158707); +#158707 = CARTESIAN_POINT('',(152.004766,-107.618428,1.585)); +#158708 = VERTEX_POINT('',#158709); +#158709 = CARTESIAN_POINT('',(152.248164,-107.614088,1.585)); +#158710 = CIRCLE('',#158711,0.12449085405); +#158711 = AXIS2_PLACEMENT_3D('',#158712,#158713,#158714); +#158712 = CARTESIAN_POINT('',(152.12693079231,-107.6423807923,1.585)); +#158713 = DIRECTION('',(0.,0.,-1.)); +#158714 = DIRECTION('',(-0.981315400644,0.192406040597,0.)); +#158715 = ORIENTED_EDGE('',*,*,#158716,.T.); +#158716 = EDGE_CURVE('',#158708,#158717,#158719,.T.); +#158717 = VERTEX_POINT('',#158718); +#158718 = CARTESIAN_POINT('',(152.437205,-107.522253,1.585)); +#158719 = LINE('',#158720,#158721); +#158720 = CARTESIAN_POINT('',(152.248164,-107.614088,1.585)); +#158721 = VECTOR('',#158722,1.); +#158722 = DIRECTION('',(0.899479947392,0.436962039815,0.)); +#158723 = ORIENTED_EDGE('',*,*,#158724,.T.); +#158724 = EDGE_CURVE('',#158717,#158725,#158727,.T.); +#158725 = VERTEX_POINT('',#158726); +#158726 = CARTESIAN_POINT('',(152.470221,-107.517814,1.585)); +#158727 = LINE('',#158728,#158729); +#158728 = CARTESIAN_POINT('',(152.437205,-107.522253,1.585)); +#158729 = VECTOR('',#158730,1.); +#158730 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#158731 = ORIENTED_EDGE('',*,*,#158732,.T.); +#158732 = EDGE_CURVE('',#158725,#158733,#158735,.T.); +#158733 = VERTEX_POINT('',#158734); +#158734 = CARTESIAN_POINT('',(152.666036,-107.520216,1.585)); +#158735 = LINE('',#158736,#158737); +#158736 = CARTESIAN_POINT('',(152.470221,-107.517814,1.585)); +#158737 = VECTOR('',#158738,1.); +#158738 = DIRECTION('',(0.999924772767,-1.226575749657E-02,0.)); +#158739 = ORIENTED_EDGE('',*,*,#158740,.T.); +#158740 = EDGE_CURVE('',#158733,#158741,#158743,.T.); +#158741 = VERTEX_POINT('',#158742); +#158742 = CARTESIAN_POINT('',(152.666036,-107.765412,1.585)); +#158743 = CIRCLE('',#158744,0.1249997864); +#158744 = AXIS2_PLACEMENT_3D('',#158745,#158746,#158747); +#158745 = CARTESIAN_POINT('',(152.64165,-107.642814,1.585)); +#158746 = DIRECTION('',(0.,0.,-1.)); +#158747 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#158748 = ORIENTED_EDGE('',*,*,#158749,.T.); +#158749 = EDGE_CURVE('',#158741,#158750,#158752,.T.); +#158750 = VERTEX_POINT('',#158751); +#158751 = CARTESIAN_POINT('',(152.49973,-107.767814,1.585)); +#158752 = LINE('',#158753,#158754); +#158753 = CARTESIAN_POINT('',(152.666036,-107.765412,1.585)); +#158754 = VECTOR('',#158755,1.); +#158755 = DIRECTION('',(-0.999895712506,-1.444174895339E-02,0.)); +#158756 = ORIENTED_EDGE('',*,*,#158757,.T.); +#158757 = EDGE_CURVE('',#158750,#158758,#158760,.T.); +#158758 = VERTEX_POINT('',#158759); +#158759 = CARTESIAN_POINT('',(152.252364,-108.015179,1.585)); +#158760 = CIRCLE('',#158761,0.347632380397); +#158761 = AXIS2_PLACEMENT_3D('',#158762,#158763,#158764); +#158762 = CARTESIAN_POINT('',(152.58847706113,-108.1039274199,1.585)); +#158763 = DIRECTION('',(0.,0.,1.)); +#158764 = DIRECTION('',(-0.25528997337,0.966864535236,0.)); +#158765 = ORIENTED_EDGE('',*,*,#158766,.T.); +#158766 = EDGE_CURVE('',#158758,#158767,#158769,.T.); +#158767 = VERTEX_POINT('',#158768); +#158768 = CARTESIAN_POINT('',(152.249962,-108.8672,1.585)); +#158769 = LINE('',#158770,#158771); +#158770 = CARTESIAN_POINT('',(152.252364,-108.015179,1.585)); +#158771 = VECTOR('',#158772,1.); +#158772 = DIRECTION('',(-2.819168136433E-03,-0.999996026138,0.)); +#158773 = ORIENTED_EDGE('',*,*,#158774,.T.); +#158774 = EDGE_CURVE('',#158767,#158775,#158777,.T.); +#158775 = VERTEX_POINT('',#158776); +#158776 = CARTESIAN_POINT('',(152.004766,-108.8672,1.585)); +#158777 = CIRCLE('',#158778,0.1249997864); +#158778 = AXIS2_PLACEMENT_3D('',#158779,#158780,#158781); +#158779 = CARTESIAN_POINT('',(152.127364,-108.842814,1.585)); +#158780 = DIRECTION('',(-0.,0.,-1.)); +#158781 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#158782 = ORIENTED_EDGE('',*,*,#158783,.T.); +#158783 = EDGE_CURVE('',#158775,#158706,#158784,.T.); +#158784 = LINE('',#158785,#158786); +#158785 = CARTESIAN_POINT('',(152.004766,-108.8672,1.585)); +#158786 = VECTOR('',#158787,1.); +#158787 = DIRECTION('',(0.,1.,0.)); +#158788 = PLANE('',#158789); +#158789 = AXIS2_PLACEMENT_3D('',#158790,#158791,#158792); +#158790 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158791 = DIRECTION('',(0.,0.,1.)); +#158792 = DIRECTION('',(1.,0.,-0.)); +#158793 = SHELL_BASED_SURFACE_MODEL('',(#158794)); +#158794 = OPEN_SHELL('',(#158795)); +#158795 = ADVANCED_FACE('',(#158796),#158970,.T.); +#158796 = FACE_BOUND('',#158797,.F.); +#158797 = EDGE_LOOP('',(#158798,#158809,#158817,#158825,#158834,#158842, + #158850,#158858,#158866,#158874,#158883,#158891,#158899,#158907, + #158915,#158923,#158931,#158940,#158948,#158956,#158964)); +#158798 = ORIENTED_EDGE('',*,*,#158799,.T.); +#158799 = EDGE_CURVE('',#158800,#158802,#158804,.T.); +#158800 = VERTEX_POINT('',#158801); +#158801 = CARTESIAN_POINT('',(188.708315,-107.785559,1.585)); +#158802 = VERTEX_POINT('',#158803); +#158803 = CARTESIAN_POINT('',(188.824983,-107.847919,1.585)); +#158804 = CIRCLE('',#158805,7.500000000004E-02); +#158805 = AXIS2_PLACEMENT_3D('',#158806,#158807,#158808); +#158806 = CARTESIAN_POINT('',(188.749983,-107.8479190655,1.585)); +#158807 = DIRECTION('',(0.,0.,-1.)); +#158808 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#158809 = ORIENTED_EDGE('',*,*,#158810,.T.); +#158810 = EDGE_CURVE('',#158802,#158811,#158813,.T.); +#158811 = VERTEX_POINT('',#158812); +#158812 = CARTESIAN_POINT('',(188.824983,-108.106252,1.585)); +#158813 = LINE('',#158814,#158815); +#158814 = CARTESIAN_POINT('',(188.824983,-107.847919,1.585)); +#158815 = VECTOR('',#158816,1.); +#158816 = DIRECTION('',(0.,-1.,0.)); +#158817 = ORIENTED_EDGE('',*,*,#158818,.T.); +#158818 = EDGE_CURVE('',#158811,#158819,#158821,.T.); +#158819 = VERTEX_POINT('',#158820); +#158820 = CARTESIAN_POINT('',(189.00271,-108.107693,1.585)); +#158821 = LINE('',#158822,#158823); +#158822 = CARTESIAN_POINT('',(188.824983,-108.106252,1.585)); +#158823 = VECTOR('',#158824,1.); +#158824 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#158825 = ORIENTED_EDGE('',*,*,#158826,.T.); +#158826 = EDGE_CURVE('',#158819,#158827,#158829,.T.); +#158827 = VERTEX_POINT('',#158828); +#158828 = CARTESIAN_POINT('',(188.988078,-108.256252,1.585)); +#158829 = CIRCLE('',#158830,7.500006711464E-02); +#158830 = AXIS2_PLACEMENT_3D('',#158831,#158832,#158833); +#158831 = CARTESIAN_POINT('',(188.98807806711,-108.1812519328,1.585)); +#158832 = DIRECTION('',(0.,0.,-1.)); +#158833 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#158834 = ORIENTED_EDGE('',*,*,#158835,.T.); +#158835 = EDGE_CURVE('',#158827,#158836,#158838,.T.); +#158836 = VERTEX_POINT('',#158837); +#158837 = CARTESIAN_POINT('',(188.824983,-108.256252,1.585)); +#158838 = LINE('',#158839,#158840); +#158839 = CARTESIAN_POINT('',(188.988078,-108.256252,1.585)); +#158840 = VECTOR('',#158841,1.); +#158841 = DIRECTION('',(-1.,0.,0.)); +#158842 = ORIENTED_EDGE('',*,*,#158843,.T.); +#158843 = EDGE_CURVE('',#158836,#158844,#158846,.T.); +#158844 = VERTEX_POINT('',#158845); +#158845 = CARTESIAN_POINT('',(188.824983,-108.687356,1.585)); +#158846 = LINE('',#158847,#158848); +#158847 = CARTESIAN_POINT('',(188.824983,-108.256252,1.585)); +#158848 = VECTOR('',#158849,1.); +#158849 = DIRECTION('',(0.,-1.,0.)); +#158850 = ORIENTED_EDGE('',*,*,#158851,.T.); +#158851 = EDGE_CURVE('',#158844,#158852,#158854,.T.); +#158852 = VERTEX_POINT('',#158853); +#158853 = CARTESIAN_POINT('',(188.853503,-108.744398,1.585)); +#158854 = LINE('',#158855,#158856); +#158855 = CARTESIAN_POINT('',(188.824983,-108.687356,1.585)); +#158856 = VECTOR('',#158857,1.); +#158857 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#158858 = ORIENTED_EDGE('',*,*,#158859,.T.); +#158859 = EDGE_CURVE('',#158852,#158860,#158862,.T.); +#158860 = VERTEX_POINT('',#158861); +#158861 = CARTESIAN_POINT('',(188.910545,-108.772919,1.585)); +#158862 = LINE('',#158863,#158864); +#158863 = CARTESIAN_POINT('',(188.853503,-108.744398,1.585)); +#158864 = VECTOR('',#158865,1.); +#158865 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#158866 = ORIENTED_EDGE('',*,*,#158867,.T.); +#158867 = EDGE_CURVE('',#158860,#158868,#158870,.T.); +#158868 = VERTEX_POINT('',#158869); +#158869 = CARTESIAN_POINT('',(189.00271,-108.77436,1.585)); +#158870 = LINE('',#158871,#158872); +#158871 = CARTESIAN_POINT('',(188.910545,-108.772919,1.585)); +#158872 = VECTOR('',#158873,1.); +#158873 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#158874 = ORIENTED_EDGE('',*,*,#158875,.T.); +#158875 = EDGE_CURVE('',#158868,#158876,#158878,.T.); +#158876 = VERTEX_POINT('',#158877); +#158877 = CARTESIAN_POINT('',(188.988078,-108.922919,1.585)); +#158878 = CIRCLE('',#158879,7.500006711464E-02); +#158879 = AXIS2_PLACEMENT_3D('',#158880,#158881,#158882); +#158880 = CARTESIAN_POINT('',(188.98807806711,-108.8479189328,1.585)); +#158881 = DIRECTION('',(0.,0.,-1.)); +#158882 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#158883 = ORIENTED_EDGE('',*,*,#158884,.T.); +#158884 = EDGE_CURVE('',#158876,#158885,#158887,.T.); +#158885 = VERTEX_POINT('',#158886); +#158886 = CARTESIAN_POINT('',(188.87303,-108.920256,1.585)); +#158887 = LINE('',#158888,#158889); +#158888 = CARTESIAN_POINT('',(188.988078,-108.922919,1.585)); +#158889 = VECTOR('',#158890,1.); +#158890 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#158891 = ORIENTED_EDGE('',*,*,#158892,.T.); +#158892 = EDGE_CURVE('',#158885,#158893,#158895,.T.); +#158893 = VERTEX_POINT('',#158894); +#158894 = CARTESIAN_POINT('',(188.751618,-108.85955,1.585)); +#158895 = LINE('',#158896,#158897); +#158896 = CARTESIAN_POINT('',(188.87303,-108.920256,1.585)); +#158897 = VECTOR('',#158898,1.); +#158898 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#158899 = ORIENTED_EDGE('',*,*,#158900,.T.); +#158900 = EDGE_CURVE('',#158893,#158901,#158903,.T.); +#158901 = VERTEX_POINT('',#158902); +#158902 = CARTESIAN_POINT('',(188.73052,-108.833841,1.585)); +#158903 = LINE('',#158904,#158905); +#158904 = CARTESIAN_POINT('',(188.751618,-108.85955,1.585)); +#158905 = VECTOR('',#158906,1.); +#158906 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#158907 = ORIENTED_EDGE('',*,*,#158908,.T.); +#158908 = EDGE_CURVE('',#158901,#158909,#158911,.T.); +#158909 = VERTEX_POINT('',#158910); +#158910 = CARTESIAN_POINT('',(188.676424,-108.719693,1.585)); +#158911 = LINE('',#158912,#158913); +#158912 = CARTESIAN_POINT('',(188.73052,-108.833841,1.585)); +#158913 = VECTOR('',#158914,1.); +#158914 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#158915 = ORIENTED_EDGE('',*,*,#158916,.T.); +#158916 = EDGE_CURVE('',#158909,#158917,#158919,.T.); +#158917 = VERTEX_POINT('',#158918); +#158918 = CARTESIAN_POINT('',(188.674983,-108.256252,1.585)); +#158919 = LINE('',#158920,#158921); +#158920 = CARTESIAN_POINT('',(188.676424,-108.719693,1.585)); +#158921 = VECTOR('',#158922,1.); +#158922 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#158923 = ORIENTED_EDGE('',*,*,#158924,.T.); +#158924 = EDGE_CURVE('',#158917,#158925,#158927,.T.); +#158925 = VERTEX_POINT('',#158926); +#158926 = CARTESIAN_POINT('',(188.592494,-108.254811,1.585)); +#158927 = LINE('',#158928,#158929); +#158928 = CARTESIAN_POINT('',(188.674983,-108.256252,1.585)); +#158929 = VECTOR('',#158930,1.); +#158930 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#158931 = ORIENTED_EDGE('',*,*,#158932,.T.); +#158932 = EDGE_CURVE('',#158925,#158933,#158935,.T.); +#158933 = VERTEX_POINT('',#158934); +#158934 = CARTESIAN_POINT('',(188.607126,-108.106252,1.585)); +#158935 = CIRCLE('',#158936,7.500006711464E-02); +#158936 = AXIS2_PLACEMENT_3D('',#158937,#158938,#158939); +#158937 = CARTESIAN_POINT('',(188.60712593288,-108.1812520671,1.585)); +#158938 = DIRECTION('',(0.,0.,-1.)); +#158939 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#158940 = ORIENTED_EDGE('',*,*,#158941,.T.); +#158941 = EDGE_CURVE('',#158933,#158942,#158944,.T.); +#158942 = VERTEX_POINT('',#158943); +#158943 = CARTESIAN_POINT('',(188.674983,-108.106252,1.585)); +#158944 = LINE('',#158945,#158946); +#158945 = CARTESIAN_POINT('',(188.607126,-108.106252,1.585)); +#158946 = VECTOR('',#158947,1.); +#158947 = DIRECTION('',(1.,0.,0.)); +#158948 = ORIENTED_EDGE('',*,*,#158949,.T.); +#158949 = EDGE_CURVE('',#158942,#158950,#158952,.T.); +#158950 = VERTEX_POINT('',#158951); +#158951 = CARTESIAN_POINT('',(188.676424,-107.833287,1.585)); +#158952 = LINE('',#158953,#158954); +#158953 = CARTESIAN_POINT('',(188.674983,-108.106252,1.585)); +#158954 = VECTOR('',#158955,1.); +#158955 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#158956 = ORIENTED_EDGE('',*,*,#158957,.T.); +#158957 = EDGE_CURVE('',#158950,#158958,#158960,.T.); +#158958 = VERTEX_POINT('',#158959); +#158959 = CARTESIAN_POINT('',(188.687623,-107.806251,1.585)); +#158960 = LINE('',#158961,#158962); +#158961 = CARTESIAN_POINT('',(188.676424,-107.833287,1.585)); +#158962 = VECTOR('',#158963,1.); +#158963 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#158964 = ORIENTED_EDGE('',*,*,#158965,.T.); +#158965 = EDGE_CURVE('',#158958,#158800,#158966,.T.); +#158966 = LINE('',#158967,#158968); +#158967 = CARTESIAN_POINT('',(188.687623,-107.806251,1.585)); +#158968 = VECTOR('',#158969,1.); +#158969 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158970 = PLANE('',#158971); +#158971 = AXIS2_PLACEMENT_3D('',#158972,#158973,#158974); +#158972 = CARTESIAN_POINT('',(0.,0.,1.585)); +#158973 = DIRECTION('',(0.,0.,1.)); +#158974 = DIRECTION('',(1.,0.,-0.)); +#158975 = SHELL_BASED_SURFACE_MODEL('',(#158976)); +#158976 = OPEN_SHELL('',(#158977)); +#158977 = ADVANCED_FACE('',(#158978),#159137,.T.); +#158978 = FACE_BOUND('',#158979,.F.); +#158979 = EDGE_LOOP('',(#158980,#158991,#158999,#159007,#159015,#159023, + #159031,#159039,#159048,#159056,#159065,#159073,#159081,#159089, + #159098,#159106,#159114,#159122,#159131)); +#158980 = ORIENTED_EDGE('',*,*,#158981,.T.); +#158981 = EDGE_CURVE('',#158982,#158984,#158986,.T.); +#158982 = VERTEX_POINT('',#158983); +#158983 = CARTESIAN_POINT('',(189.287871,-107.828456,1.585)); +#158984 = VERTEX_POINT('',#158985); +#158985 = CARTESIAN_POINT('',(189.797266,-107.837786,1.585)); +#158986 = CIRCLE('',#158987,0.450326844012); +#158987 = AXIS2_PLACEMENT_3D('',#158988,#158989,#158990); +#158988 = CARTESIAN_POINT('',(189.5357680301,-108.2044098919,1.585)); +#158989 = DIRECTION('',(0.,0.,-1.)); +#158990 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#158991 = ORIENTED_EDGE('',*,*,#158992,.T.); +#158992 = EDGE_CURVE('',#158984,#158993,#158995,.T.); +#158993 = VERTEX_POINT('',#158994); +#158994 = CARTESIAN_POINT('',(189.860719,-107.903316,1.585)); +#158995 = LINE('',#158996,#158997); +#158996 = CARTESIAN_POINT('',(189.797266,-107.837786,1.585)); +#158997 = VECTOR('',#158998,1.); +#158998 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#158999 = ORIENTED_EDGE('',*,*,#159000,.T.); +#159000 = EDGE_CURVE('',#158993,#159001,#159003,.T.); +#159001 = VERTEX_POINT('',#159002); +#159002 = CARTESIAN_POINT('',(189.91878,-108.023763,1.585)); +#159003 = LINE('',#159004,#159005); +#159004 = CARTESIAN_POINT('',(189.860719,-107.903316,1.585)); +#159005 = VECTOR('',#159006,1.); +#159006 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#159007 = ORIENTED_EDGE('',*,*,#159008,.T.); +#159008 = EDGE_CURVE('',#159001,#159009,#159011,.T.); +#159009 = VERTEX_POINT('',#159010); +#159010 = CARTESIAN_POINT('',(189.918021,-108.150095,1.585)); +#159011 = LINE('',#159012,#159013); +#159012 = CARTESIAN_POINT('',(189.91878,-108.023763,1.585)); +#159013 = VECTOR('',#159014,1.); +#159014 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#159015 = ORIENTED_EDGE('',*,*,#159016,.T.); +#159016 = EDGE_CURVE('',#159009,#159017,#159019,.T.); +#159017 = VERTEX_POINT('',#159018); +#159018 = CARTESIAN_POINT('',(189.859963,-108.318158,1.585)); +#159019 = LINE('',#159020,#159021); +#159020 = CARTESIAN_POINT('',(189.918021,-108.150095,1.585)); +#159021 = VECTOR('',#159022,1.); +#159022 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#159023 = ORIENTED_EDGE('',*,*,#159024,.T.); +#159024 = EDGE_CURVE('',#159017,#159025,#159027,.T.); +#159025 = VERTEX_POINT('',#159026); +#159026 = CARTESIAN_POINT('',(189.40724,-108.772919,1.585)); +#159027 = LINE('',#159028,#159029); +#159028 = CARTESIAN_POINT('',(189.859963,-108.318158,1.585)); +#159029 = VECTOR('',#159030,1.); +#159030 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#159031 = ORIENTED_EDGE('',*,*,#159032,.T.); +#159032 = EDGE_CURVE('',#159025,#159033,#159035,.T.); +#159033 = VERTEX_POINT('',#159034); +#159034 = CARTESIAN_POINT('',(189.859853,-108.77436,1.585)); +#159035 = LINE('',#159036,#159037); +#159036 = CARTESIAN_POINT('',(189.40724,-108.772919,1.585)); +#159037 = VECTOR('',#159038,1.); +#159038 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#159039 = ORIENTED_EDGE('',*,*,#159040,.T.); +#159040 = EDGE_CURVE('',#159033,#159041,#159043,.T.); +#159041 = VERTEX_POINT('',#159042); +#159042 = CARTESIAN_POINT('',(189.845221,-108.922919,1.585)); +#159043 = CIRCLE('',#159044,7.500006711463E-02); +#159044 = AXIS2_PLACEMENT_3D('',#159045,#159046,#159047); +#159045 = CARTESIAN_POINT('',(189.84522106711,-108.8479189328,1.585)); +#159046 = DIRECTION('',(0.,0.,-1.)); +#159047 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#159048 = ORIENTED_EDGE('',*,*,#159049,.T.); +#159049 = EDGE_CURVE('',#159041,#159050,#159052,.T.); +#159050 = VERTEX_POINT('',#159051); +#159051 = CARTESIAN_POINT('',(189.211542,-108.921478,1.585)); +#159052 = LINE('',#159053,#159054); +#159053 = CARTESIAN_POINT('',(189.845221,-108.922919,1.585)); +#159054 = VECTOR('',#159055,1.); +#159055 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#159056 = ORIENTED_EDGE('',*,*,#159057,.T.); +#159057 = EDGE_CURVE('',#159050,#159058,#159060,.T.); +#159058 = VERTEX_POINT('',#159059); +#159059 = CARTESIAN_POINT('',(189.173141,-108.794886,1.585)); +#159060 = CIRCLE('',#159061,7.500021013109E-02); +#159061 = AXIS2_PLACEMENT_3D('',#159062,#159063,#159064); +#159062 = CARTESIAN_POINT('',(189.2261743167,-108.8479189976,1.585)); +#159063 = DIRECTION('',(0.,0.,-1.)); +#159064 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#159065 = ORIENTED_EDGE('',*,*,#159066,.T.); +#159066 = EDGE_CURVE('',#159058,#159067,#159069,.T.); +#159067 = VERTEX_POINT('',#159068); +#159068 = CARTESIAN_POINT('',(189.732049,-108.235976,1.585)); +#159069 = LINE('',#159070,#159071); +#159070 = CARTESIAN_POINT('',(189.173141,-108.794886,1.585)); +#159071 = VECTOR('',#159072,1.); +#159072 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#159073 = ORIENTED_EDGE('',*,*,#159074,.T.); +#159074 = EDGE_CURVE('',#159067,#159075,#159077,.T.); +#159075 = VERTEX_POINT('',#159076); +#159076 = CARTESIAN_POINT('',(189.770221,-108.121463,1.585)); +#159077 = LINE('',#159078,#159079); +#159078 = CARTESIAN_POINT('',(189.732049,-108.235976,1.585)); +#159079 = VECTOR('',#159080,1.); +#159080 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#159081 = ORIENTED_EDGE('',*,*,#159082,.T.); +#159082 = EDGE_CURVE('',#159075,#159083,#159085,.T.); +#159083 = VERTEX_POINT('',#159084); +#159084 = CARTESIAN_POINT('',(189.770221,-108.0561,1.585)); +#159085 = LINE('',#159086,#159087); +#159086 = CARTESIAN_POINT('',(189.770221,-108.121463,1.585)); +#159087 = VECTOR('',#159088,1.); +#159088 = DIRECTION('',(0.,1.,0.)); +#159089 = ORIENTED_EDGE('',*,*,#159090,.T.); +#159090 = EDGE_CURVE('',#159083,#159091,#159093,.T.); +#159091 = VERTEX_POINT('',#159092); +#159092 = CARTESIAN_POINT('',(189.63704,-107.922919,1.585)); +#159093 = CIRCLE('',#159094,0.18686440374); +#159094 = AXIS2_PLACEMENT_3D('',#159095,#159096,#159097); +#159095 = CARTESIAN_POINT('',(189.589504,-108.103636,1.585)); +#159096 = DIRECTION('',(0.,0.,1.)); +#159097 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#159098 = ORIENTED_EDGE('',*,*,#159099,.T.); +#159099 = EDGE_CURVE('',#159091,#159100,#159102,.T.); +#159100 = VERTEX_POINT('',#159101); +#159101 = CARTESIAN_POINT('',(189.434355,-107.922919,1.585)); +#159102 = LINE('',#159103,#159104); +#159103 = CARTESIAN_POINT('',(189.63704,-107.922919,1.585)); +#159104 = VECTOR('',#159105,1.); +#159105 = DIRECTION('',(-1.,0.,0.)); +#159106 = ORIENTED_EDGE('',*,*,#159107,.T.); +#159107 = EDGE_CURVE('',#159100,#159108,#159110,.T.); +#159108 = VERTEX_POINT('',#159109); +#159109 = CARTESIAN_POINT('',(189.365839,-107.957177,1.585)); +#159110 = LINE('',#159111,#159112); +#159111 = CARTESIAN_POINT('',(189.434355,-107.922919,1.585)); +#159112 = VECTOR('',#159113,1.); +#159113 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#159114 = ORIENTED_EDGE('',*,*,#159115,.T.); +#159115 = EDGE_CURVE('',#159108,#159116,#159118,.T.); +#159116 = VERTEX_POINT('',#159117); +#159117 = CARTESIAN_POINT('',(189.315461,-108.005517,1.585)); +#159118 = LINE('',#159119,#159120); +#159119 = CARTESIAN_POINT('',(189.365839,-107.957177,1.585)); +#159120 = VECTOR('',#159121,1.); +#159121 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#159122 = ORIENTED_EDGE('',*,*,#159123,.T.); +#159123 = EDGE_CURVE('',#159116,#159124,#159126,.T.); +#159124 = VERTEX_POINT('',#159125); +#159125 = CARTESIAN_POINT('',(189.22076,-107.890124,1.585)); +#159126 = CIRCLE('',#159127,7.499996838527E-02); +#159127 = AXIS2_PLACEMENT_3D('',#159128,#159129,#159130); +#159128 = CARTESIAN_POINT('',(189.273793,-107.9431569724,1.585)); +#159129 = DIRECTION('',(0.,0.,-1.)); +#159130 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#159131 = ORIENTED_EDGE('',*,*,#159132,.T.); +#159132 = EDGE_CURVE('',#159124,#158982,#159133,.T.); +#159133 = LINE('',#159134,#159135); +#159134 = CARTESIAN_POINT('',(189.22076,-107.890124,1.585)); +#159135 = VECTOR('',#159136,1.); +#159136 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#159137 = PLANE('',#159138); +#159138 = AXIS2_PLACEMENT_3D('',#159139,#159140,#159141); +#159139 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159140 = DIRECTION('',(0.,0.,1.)); +#159141 = DIRECTION('',(1.,0.,-0.)); +#159142 = SHELL_BASED_SURFACE_MODEL('',(#159143)); +#159143 = OPEN_SHELL('',(#159144)); +#159144 = ADVANCED_FACE('',(#159145),#159330,.T.); +#159145 = FACE_BOUND('',#159146,.F.); +#159146 = EDGE_LOOP('',(#159147,#159158,#159166,#159175,#159183,#159192, + #159200,#159209,#159217,#159225,#159233,#159242,#159250,#159259, + #159267,#159276,#159284,#159292,#159300,#159308,#159316,#159324)); +#159147 = ORIENTED_EDGE('',*,*,#159148,.T.); +#159148 = EDGE_CURVE('',#159149,#159151,#159153,.T.); +#159149 = VERTEX_POINT('',#159150); +#159150 = CARTESIAN_POINT('',(186.141411,-107.830381,1.585)); +#159151 = VERTEX_POINT('',#159152); +#159152 = CARTESIAN_POINT('',(186.601174,-107.833178,1.585)); +#159153 = CIRCLE('',#159154,0.46078517582); +#159154 = AXIS2_PLACEMENT_3D('',#159155,#159156,#159157); +#159155 = CARTESIAN_POINT('',(186.36886310897,-108.2311159702,1.585)); +#159156 = DIRECTION('',(0.,0.,-1.)); +#159157 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#159158 = ORIENTED_EDGE('',*,*,#159159,.T.); +#159159 = EDGE_CURVE('',#159151,#159160,#159162,.T.); +#159160 = VERTEX_POINT('',#159161); +#159161 = CARTESIAN_POINT('',(186.669485,-107.901489,1.585)); +#159162 = LINE('',#159163,#159164); +#159163 = CARTESIAN_POINT('',(186.601174,-107.833178,1.585)); +#159164 = VECTOR('',#159165,1.); +#159165 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#159166 = ORIENTED_EDGE('',*,*,#159167,.T.); +#159167 = EDGE_CURVE('',#159160,#159168,#159170,.T.); +#159168 = VERTEX_POINT('',#159169); +#159169 = CARTESIAN_POINT('',(186.554092,-107.99619,1.585)); +#159170 = CIRCLE('',#159171,7.500003178657E-02); +#159171 = AXIS2_PLACEMENT_3D('',#159172,#159173,#159174); +#159172 = CARTESIAN_POINT('',(186.60712456212,-107.9431565,1.585)); +#159173 = DIRECTION('',(0.,0.,-1.)); +#159174 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#159175 = ORIENTED_EDGE('',*,*,#159176,.T.); +#159176 = EDGE_CURVE('',#159168,#159177,#159179,.T.); +#159177 = VERTEX_POINT('',#159178); +#159178 = CARTESIAN_POINT('',(186.518992,-107.96109,1.585)); +#159179 = LINE('',#159180,#159181); +#159180 = CARTESIAN_POINT('',(186.554092,-107.99619,1.585)); +#159181 = VECTOR('',#159182,1.); +#159182 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#159183 = ORIENTED_EDGE('',*,*,#159184,.T.); +#159184 = EDGE_CURVE('',#159177,#159185,#159187,.T.); +#159185 = VERTEX_POINT('',#159186); +#159186 = CARTESIAN_POINT('',(186.219068,-107.96109,1.585)); +#159187 = CIRCLE('',#159188,0.299308637371); +#159188 = AXIS2_PLACEMENT_3D('',#159189,#159190,#159191); +#159189 = CARTESIAN_POINT('',(186.36903,-108.220121,1.585)); +#159190 = DIRECTION('',(0.,0.,1.)); +#159191 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#159192 = ORIENTED_EDGE('',*,*,#159193,.T.); +#159193 = EDGE_CURVE('',#159185,#159194,#159196,.T.); +#159194 = VERTEX_POINT('',#159195); +#159195 = CARTESIAN_POINT('',(186.144955,-108.035203,1.585)); +#159196 = LINE('',#159197,#159198); +#159197 = CARTESIAN_POINT('',(186.219068,-107.96109,1.585)); +#159198 = VECTOR('',#159199,1.); +#159199 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#159200 = ORIENTED_EDGE('',*,*,#159201,.T.); +#159201 = EDGE_CURVE('',#159194,#159202,#159204,.T.); +#159202 = VERTEX_POINT('',#159203); +#159203 = CARTESIAN_POINT('',(186.063078,-108.410113,1.585)); +#159204 = CIRCLE('',#159205,0.611712714363); +#159205 = AXIS2_PLACEMENT_3D('',#159206,#159207,#159208); +#159206 = CARTESIAN_POINT('',(186.67148327521,-108.3465876822,1.585)); +#159207 = DIRECTION('',(0.,0.,1.)); +#159208 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#159209 = ORIENTED_EDGE('',*,*,#159210,.T.); +#159210 = EDGE_CURVE('',#159202,#159211,#159213,.T.); +#159211 = VERTEX_POINT('',#159212); +#159212 = CARTESIAN_POINT('',(186.106461,-108.583647,1.585)); +#159213 = LINE('',#159214,#159215); +#159214 = CARTESIAN_POINT('',(186.063078,-108.410113,1.585)); +#159215 = VECTOR('',#159216,1.); +#159216 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#159217 = ORIENTED_EDGE('',*,*,#159218,.T.); +#159218 = EDGE_CURVE('',#159211,#159219,#159221,.T.); +#159219 = VERTEX_POINT('',#159220); +#159220 = CARTESIAN_POINT('',(186.144955,-108.660634,1.585)); +#159221 = LINE('',#159222,#159223); +#159222 = CARTESIAN_POINT('',(186.106461,-108.583647,1.585)); +#159223 = VECTOR('',#159224,1.); +#159224 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#159225 = ORIENTED_EDGE('',*,*,#159226,.T.); +#159226 = EDGE_CURVE('',#159219,#159227,#159229,.T.); +#159227 = VERTEX_POINT('',#159228); +#159228 = CARTESIAN_POINT('',(186.219068,-108.734748,1.585)); +#159229 = LINE('',#159230,#159231); +#159230 = CARTESIAN_POINT('',(186.144955,-108.660634,1.585)); +#159231 = VECTOR('',#159232,1.); +#159232 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#159233 = ORIENTED_EDGE('',*,*,#159234,.T.); +#159234 = EDGE_CURVE('',#159227,#159235,#159237,.T.); +#159235 = VERTEX_POINT('',#159236); +#159236 = CARTESIAN_POINT('',(186.518992,-108.734747,1.585)); +#159237 = CIRCLE('',#159238,0.299305962385); +#159238 = AXIS2_PLACEMENT_3D('',#159239,#159240,#159241); +#159239 = CARTESIAN_POINT('',(186.36902913635,-108.4757195909,1.585)); +#159240 = DIRECTION('',(0.,0.,1.)); +#159241 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#159242 = ORIENTED_EDGE('',*,*,#159243,.T.); +#159243 = EDGE_CURVE('',#159235,#159244,#159246,.T.); +#159244 = VERTEX_POINT('',#159245); +#159245 = CARTESIAN_POINT('',(186.565457,-108.69032,1.585)); +#159246 = LINE('',#159247,#159248); +#159247 = CARTESIAN_POINT('',(186.518992,-108.734747,1.585)); +#159248 = VECTOR('',#159249,1.); +#159249 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#159250 = ORIENTED_EDGE('',*,*,#159251,.T.); +#159251 = EDGE_CURVE('',#159244,#159252,#159254,.T.); +#159252 = VERTEX_POINT('',#159253); +#159253 = CARTESIAN_POINT('',(186.660158,-108.805713,1.585)); +#159254 = CIRCLE('',#159255,7.499993690112E-02); +#159255 = AXIS2_PLACEMENT_3D('',#159256,#159257,#159258); +#159256 = CARTESIAN_POINT('',(186.6071252483,-108.7526798237,1.585)); +#159257 = DIRECTION('',(0.,0.,-1.)); +#159258 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#159259 = ORIENTED_EDGE('',*,*,#159260,.T.); +#159260 = EDGE_CURVE('',#159252,#159261,#159263,.T.); +#159261 = VERTEX_POINT('',#159262); +#159262 = CARTESIAN_POINT('',(186.596648,-108.865457,1.585)); +#159263 = LINE('',#159264,#159265); +#159264 = CARTESIAN_POINT('',(186.660158,-108.805713,1.585)); +#159265 = VECTOR('',#159266,1.); +#159266 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#159267 = ORIENTED_EDGE('',*,*,#159268,.T.); +#159268 = EDGE_CURVE('',#159261,#159269,#159271,.T.); +#159269 = VERTEX_POINT('',#159270); +#159270 = CARTESIAN_POINT('',(186.136886,-108.862661,1.585)); +#159271 = CIRCLE('',#159272,0.461067828848); +#159272 = AXIS2_PLACEMENT_3D('',#159273,#159274,#159275); +#159273 = CARTESIAN_POINT('',(186.36919751268,-108.4643961335,1.585)); +#159274 = DIRECTION('',(-0.,0.,-1.)); +#159275 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#159276 = ORIENTED_EDGE('',*,*,#159277,.T.); +#159277 = EDGE_CURVE('',#159269,#159278,#159280,.T.); +#159278 = VERTEX_POINT('',#159279); +#159279 = CARTESIAN_POINT('',(186.020197,-108.744898,1.585)); +#159280 = LINE('',#159281,#159282); +#159281 = CARTESIAN_POINT('',(186.136886,-108.862661,1.585)); +#159282 = VECTOR('',#159283,1.); +#159283 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#159284 = ORIENTED_EDGE('',*,*,#159285,.T.); +#159285 = EDGE_CURVE('',#159278,#159286,#159288,.T.); +#159286 = VERTEX_POINT('',#159287); +#159287 = CARTESIAN_POINT('',(185.962936,-108.628013,1.585)); +#159288 = LINE('',#159289,#159290); +#159289 = CARTESIAN_POINT('',(186.020197,-108.744898,1.585)); +#159290 = VECTOR('',#159291,1.); +#159291 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#159292 = ORIENTED_EDGE('',*,*,#159293,.T.); +#159293 = EDGE_CURVE('',#159286,#159294,#159296,.T.); +#159294 = VERTEX_POINT('',#159295); +#159295 = CARTESIAN_POINT('',(185.913078,-108.419347,1.585)); +#159296 = LINE('',#159297,#159298); +#159297 = CARTESIAN_POINT('',(185.962936,-108.628013,1.585)); +#159298 = VECTOR('',#159299,1.); +#159299 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#159300 = ORIENTED_EDGE('',*,*,#159301,.T.); +#159301 = EDGE_CURVE('',#159294,#159302,#159304,.T.); +#159302 = VERTEX_POINT('',#159303); +#159303 = CARTESIAN_POINT('',(185.915317,-108.2583,1.585)); +#159304 = LINE('',#159305,#159306); +#159305 = CARTESIAN_POINT('',(185.913078,-108.419347,1.585)); +#159306 = VECTOR('',#159307,1.); +#159307 = DIRECTION('',(1.39014303055E-02,0.999903370449,0.)); +#159308 = ORIENTED_EDGE('',*,*,#159309,.T.); +#159309 = EDGE_CURVE('',#159302,#159310,#159312,.T.); +#159310 = VERTEX_POINT('',#159311); +#159311 = CARTESIAN_POINT('',(185.968615,-108.052473,1.585)); +#159312 = LINE('',#159313,#159314); +#159313 = CARTESIAN_POINT('',(185.915317,-108.2583,1.585)); +#159314 = VECTOR('',#159315,1.); +#159315 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#159316 = ORIENTED_EDGE('',*,*,#159317,.T.); +#159317 = EDGE_CURVE('',#159310,#159318,#159320,.T.); +#159318 = VERTEX_POINT('',#159319); +#159319 = CARTESIAN_POINT('',(186.025564,-107.943492,1.585)); +#159320 = LINE('',#159321,#159322); +#159321 = CARTESIAN_POINT('',(185.968615,-108.052473,1.585)); +#159322 = VECTOR('',#159323,1.); +#159323 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#159324 = ORIENTED_EDGE('',*,*,#159325,.T.); +#159325 = EDGE_CURVE('',#159318,#159149,#159326,.T.); +#159326 = LINE('',#159327,#159328); +#159327 = CARTESIAN_POINT('',(186.025564,-107.943492,1.585)); +#159328 = VECTOR('',#159329,1.); +#159329 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#159330 = PLANE('',#159331); +#159331 = AXIS2_PLACEMENT_3D('',#159332,#159333,#159334); +#159332 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159333 = DIRECTION('',(0.,0.,1.)); +#159334 = DIRECTION('',(1.,0.,-0.)); +#159335 = SHELL_BASED_SURFACE_MODEL('',(#159336)); +#159336 = OPEN_SHELL('',(#159337)); +#159337 = ADVANCED_FACE('',(#159338,#159479),#159547,.T.); +#159338 = FACE_BOUND('',#159339,.F.); +#159339 = EDGE_LOOP('',(#159340,#159350,#159358,#159366,#159374,#159382, + #159390,#159398,#159407,#159415,#159424,#159432,#159440,#159449, + #159457,#159465,#159473)); +#159340 = ORIENTED_EDGE('',*,*,#159341,.T.); +#159341 = EDGE_CURVE('',#159342,#159344,#159346,.T.); +#159342 = VERTEX_POINT('',#159343); +#159343 = CARTESIAN_POINT('',(186.973337,-107.806251,1.585)); +#159344 = VERTEX_POINT('',#159345); +#159345 = CARTESIAN_POINT('',(186.994029,-107.785559,1.585)); +#159346 = LINE('',#159347,#159348); +#159347 = CARTESIAN_POINT('',(186.973337,-107.806251,1.585)); +#159348 = VECTOR('',#159349,1.); +#159349 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#159350 = ORIENTED_EDGE('',*,*,#159351,.T.); +#159351 = EDGE_CURVE('',#159344,#159352,#159354,.T.); +#159352 = VERTEX_POINT('',#159353); +#159353 = CARTESIAN_POINT('',(187.008174,-107.779699,1.585)); +#159354 = LINE('',#159355,#159356); +#159355 = CARTESIAN_POINT('',(186.994029,-107.785559,1.585)); +#159356 = VECTOR('',#159357,1.); +#159357 = DIRECTION('',(0.923857613212,0.382736345948,0.)); +#159358 = ORIENTED_EDGE('',*,*,#159359,.T.); +#159359 = EDGE_CURVE('',#159352,#159360,#159362,.T.); +#159360 = VERTEX_POINT('',#159361); +#159361 = CARTESIAN_POINT('',(187.01693,-107.800836,1.585)); +#159362 = LINE('',#159363,#159364); +#159363 = CARTESIAN_POINT('',(187.008174,-107.779699,1.585)); +#159364 = VECTOR('',#159365,1.); +#159365 = DIRECTION('',(0.382712081872,-0.923867664976,0.)); +#159366 = ORIENTED_EDGE('',*,*,#159367,.T.); +#159367 = EDGE_CURVE('',#159360,#159368,#159370,.T.); +#159368 = VERTEX_POINT('',#159369); +#159369 = CARTESIAN_POINT('',(187.058314,-107.84222,1.585)); +#159370 = LINE('',#159371,#159372); +#159371 = CARTESIAN_POINT('',(187.01693,-107.800836,1.585)); +#159372 = VECTOR('',#159373,1.); +#159373 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#159374 = ORIENTED_EDGE('',*,*,#159375,.T.); +#159375 = EDGE_CURVE('',#159368,#159376,#159378,.T.); +#159376 = VERTEX_POINT('',#159377); +#159377 = CARTESIAN_POINT('',(187.110723,-107.863929,1.585)); +#159378 = LINE('',#159379,#159380); +#159379 = CARTESIAN_POINT('',(187.058314,-107.84222,1.585)); +#159380 = VECTOR('',#159381,1.); +#159381 = DIRECTION('',(0.923876532092,-0.382690675937,0.)); +#159382 = ORIENTED_EDGE('',*,*,#159383,.T.); +#159383 = EDGE_CURVE('',#159376,#159384,#159386,.T.); +#159384 = VERTEX_POINT('',#159385); +#159385 = CARTESIAN_POINT('',(187.111125,-108.108915,1.585)); +#159386 = LINE('',#159387,#159388); +#159387 = CARTESIAN_POINT('',(187.110723,-107.863929,1.585)); +#159388 = VECTOR('',#159389,1.); +#159389 = DIRECTION('',(1.640907883598E-03,-0.99999865371,0.)); +#159390 = ORIENTED_EDGE('',*,*,#159391,.T.); +#159391 = EDGE_CURVE('',#159384,#159392,#159394,.T.); +#159392 = VERTEX_POINT('',#159393); +#159393 = CARTESIAN_POINT('',(187.34122,-108.108915,1.585)); +#159394 = LINE('',#159395,#159396); +#159395 = CARTESIAN_POINT('',(187.111125,-108.108915,1.585)); +#159396 = VECTOR('',#159397,1.); +#159397 = DIRECTION('',(1.,0.,0.)); +#159398 = ORIENTED_EDGE('',*,*,#159399,.T.); +#159399 = EDGE_CURVE('',#159392,#159400,#159402,.T.); +#159400 = VERTEX_POINT('',#159401); +#159401 = CARTESIAN_POINT('',(187.585446,-108.357096,1.585)); +#159402 = CIRCLE('',#159403,0.348625649748); +#159403 = AXIS2_PLACEMENT_3D('',#159404,#159405,#159406); +#159404 = CARTESIAN_POINT('',(187.24804804586,-108.4448596838,1.585)); +#159405 = DIRECTION('',(0.,0.,-1.)); +#159406 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#159407 = ORIENTED_EDGE('',*,*,#159408,.T.); +#159408 = EDGE_CURVE('',#159400,#159409,#159411,.T.); +#159409 = VERTEX_POINT('',#159410); +#159410 = CARTESIAN_POINT('',(187.584224,-108.677252,1.585)); +#159411 = LINE('',#159412,#159413); +#159412 = CARTESIAN_POINT('',(187.585446,-108.357096,1.585)); +#159413 = VECTOR('',#159414,1.); +#159414 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#159415 = ORIENTED_EDGE('',*,*,#159416,.T.); +#159416 = EDGE_CURVE('',#159409,#159417,#159419,.T.); +#159417 = VERTEX_POINT('',#159418); +#159418 = CARTESIAN_POINT('',(187.336043,-108.921478,1.585)); +#159419 = CIRCLE('',#159420,0.348635327447); +#159420 = AXIS2_PLACEMENT_3D('',#159421,#159422,#159423); +#159421 = CARTESIAN_POINT('',(187.24827148129,-108.5840720841,1.585)); +#159422 = DIRECTION('',(0.,0.,-1.)); +#159423 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#159424 = ORIENTED_EDGE('',*,*,#159425,.T.); +#159425 = EDGE_CURVE('',#159417,#159426,#159428,.T.); +#159426 = VERTEX_POINT('',#159427); +#159427 = CARTESIAN_POINT('',(187.111125,-108.920256,1.585)); +#159428 = LINE('',#159429,#159430); +#159429 = CARTESIAN_POINT('',(187.336043,-108.921478,1.585)); +#159430 = VECTOR('',#159431,1.); +#159431 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#159432 = ORIENTED_EDGE('',*,*,#159433,.T.); +#159433 = EDGE_CURVE('',#159426,#159434,#159436,.T.); +#159434 = VERTEX_POINT('',#159435); +#159435 = CARTESIAN_POINT('',(187.080893,-108.90675,1.585)); +#159436 = LINE('',#159437,#159438); +#159437 = CARTESIAN_POINT('',(187.111125,-108.920256,1.585)); +#159438 = VECTOR('',#159439,1.); +#159439 = DIRECTION('',(-0.913030248774,0.407891854324,0.)); +#159440 = ORIENTED_EDGE('',*,*,#159441,.T.); +#159441 = EDGE_CURVE('',#159434,#159442,#159444,.T.); +#159442 = VERTEX_POINT('',#159443); +#159443 = CARTESIAN_POINT('',(186.994029,-108.910279,1.585)); +#159444 = CIRCLE('',#159445,7.22639760609E-02); +#159445 = AXIS2_PLACEMENT_3D('',#159446,#159447,#159448); +#159446 = CARTESIAN_POINT('',(187.03511759538,-108.8508331459,1.585)); +#159447 = DIRECTION('',(-0.,0.,-1.)); +#159448 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#159449 = ORIENTED_EDGE('',*,*,#159450,.T.); +#159450 = EDGE_CURVE('',#159442,#159451,#159453,.T.); +#159451 = VERTEX_POINT('',#159452); +#159452 = CARTESIAN_POINT('',(186.973337,-108.889587,1.585)); +#159453 = LINE('',#159454,#159455); +#159454 = CARTESIAN_POINT('',(186.994029,-108.910279,1.585)); +#159455 = VECTOR('',#159456,1.); +#159456 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#159457 = ORIENTED_EDGE('',*,*,#159458,.T.); +#159458 = EDGE_CURVE('',#159451,#159459,#159461,.T.); +#159459 = VERTEX_POINT('',#159460); +#159460 = CARTESIAN_POINT('',(186.960697,-108.847919,1.585)); +#159461 = LINE('',#159462,#159463); +#159462 = CARTESIAN_POINT('',(186.973337,-108.889587,1.585)); +#159463 = VECTOR('',#159464,1.); +#159464 = DIRECTION('',(-0.290287839989,0.956939376321,0.)); +#159465 = ORIENTED_EDGE('',*,*,#159466,.T.); +#159466 = EDGE_CURVE('',#159459,#159467,#159469,.T.); +#159467 = VERTEX_POINT('',#159468); +#159468 = CARTESIAN_POINT('',(186.962138,-107.833287,1.585)); +#159469 = LINE('',#159470,#159471); +#159470 = CARTESIAN_POINT('',(186.960697,-108.847919,1.585)); +#159471 = VECTOR('',#159472,1.); +#159472 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#159473 = ORIENTED_EDGE('',*,*,#159474,.T.); +#159474 = EDGE_CURVE('',#159467,#159342,#159475,.T.); +#159475 = LINE('',#159476,#159477); +#159476 = CARTESIAN_POINT('',(186.962138,-107.833287,1.585)); +#159477 = VECTOR('',#159478,1.); +#159478 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#159479 = FACE_BOUND('',#159480,.F.); +#159480 = EDGE_LOOP('',(#159481,#159492,#159500,#159508,#159516,#159524, + #159532,#159541)); +#159481 = ORIENTED_EDGE('',*,*,#159482,.T.); +#159482 = EDGE_CURVE('',#159483,#159485,#159487,.T.); +#159483 = VERTEX_POINT('',#159484); +#159484 = CARTESIAN_POINT('',(187.436887,-108.389433,1.585)); +#159485 = VERTEX_POINT('',#159486); +#159486 = CARTESIAN_POINT('',(187.303706,-108.256252,1.585)); +#159487 = CIRCLE('',#159488,0.18686440374); +#159488 = AXIS2_PLACEMENT_3D('',#159489,#159490,#159491); +#159489 = CARTESIAN_POINT('',(187.25617,-108.436969,1.585)); +#159490 = DIRECTION('',(0.,0.,1.)); +#159491 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#159492 = ORIENTED_EDGE('',*,*,#159493,.T.); +#159493 = EDGE_CURVE('',#159485,#159494,#159496,.T.); +#159494 = VERTEX_POINT('',#159495); +#159495 = CARTESIAN_POINT('',(187.14864,-108.256252,1.585)); +#159496 = LINE('',#159497,#159498); +#159497 = CARTESIAN_POINT('',(187.303706,-108.256252,1.585)); +#159498 = VECTOR('',#159499,1.); +#159499 = DIRECTION('',(-1.,0.,0.)); +#159500 = ORIENTED_EDGE('',*,*,#159501,.T.); +#159501 = EDGE_CURVE('',#159494,#159502,#159504,.T.); +#159502 = VERTEX_POINT('',#159503); +#159503 = CARTESIAN_POINT('',(187.110697,-108.275223,1.585)); +#159504 = LINE('',#159505,#159506); +#159505 = CARTESIAN_POINT('',(187.14864,-108.256252,1.585)); +#159506 = VECTOR('',#159507,1.); +#159507 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#159508 = ORIENTED_EDGE('',*,*,#159509,.T.); +#159509 = EDGE_CURVE('',#159502,#159510,#159512,.T.); +#159510 = VERTEX_POINT('',#159511); +#159511 = CARTESIAN_POINT('',(187.110697,-108.753947,1.585)); +#159512 = LINE('',#159513,#159514); +#159513 = CARTESIAN_POINT('',(187.110697,-108.275223,1.585)); +#159514 = VECTOR('',#159515,1.); +#159515 = DIRECTION('',(0.,-1.,0.)); +#159516 = ORIENTED_EDGE('',*,*,#159517,.T.); +#159517 = EDGE_CURVE('',#159510,#159518,#159520,.T.); +#159518 = VERTEX_POINT('',#159519); +#159519 = CARTESIAN_POINT('',(187.14864,-108.772919,1.585)); +#159520 = LINE('',#159521,#159522); +#159521 = CARTESIAN_POINT('',(187.110697,-108.753947,1.585)); +#159522 = VECTOR('',#159523,1.); +#159523 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#159524 = ORIENTED_EDGE('',*,*,#159525,.T.); +#159525 = EDGE_CURVE('',#159518,#159526,#159528,.T.); +#159526 = VERTEX_POINT('',#159527); +#159527 = CARTESIAN_POINT('',(187.303706,-108.772919,1.585)); +#159528 = LINE('',#159529,#159530); +#159529 = CARTESIAN_POINT('',(187.14864,-108.772919,1.585)); +#159530 = VECTOR('',#159531,1.); +#159531 = DIRECTION('',(1.,0.,0.)); +#159532 = ORIENTED_EDGE('',*,*,#159533,.T.); +#159533 = EDGE_CURVE('',#159526,#159534,#159536,.T.); +#159534 = VERTEX_POINT('',#159535); +#159535 = CARTESIAN_POINT('',(187.436887,-108.639737,1.585)); +#159536 = CIRCLE('',#159537,0.186867760544); +#159537 = AXIS2_PLACEMENT_3D('',#159538,#159539,#159540); +#159538 = CARTESIAN_POINT('',(187.25616696928,-108.5921993262,1.585)); +#159539 = DIRECTION('',(0.,0.,1.)); +#159540 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#159541 = ORIENTED_EDGE('',*,*,#159542,.T.); +#159542 = EDGE_CURVE('',#159534,#159483,#159543,.T.); +#159543 = LINE('',#159544,#159545); +#159544 = CARTESIAN_POINT('',(187.436887,-108.639737,1.585)); +#159545 = VECTOR('',#159546,1.); +#159546 = DIRECTION('',(0.,1.,0.)); +#159547 = PLANE('',#159548); +#159548 = AXIS2_PLACEMENT_3D('',#159549,#159550,#159551); +#159549 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159550 = DIRECTION('',(0.,0.,1.)); +#159551 = DIRECTION('',(1.,0.,-0.)); +#159552 = SHELL_BASED_SURFACE_MODEL('',(#159553)); +#159553 = OPEN_SHELL('',(#159554)); +#159554 = ADVANCED_FACE('',(#159555),#159840,.T.); +#159555 = FACE_BOUND('',#159556,.F.); +#159556 = EDGE_LOOP('',(#159557,#159567,#159575,#159583,#159592,#159600, + #159608,#159616,#159624,#159632,#159640,#159648,#159656,#159664, + #159672,#159680,#159688,#159696,#159704,#159713,#159721,#159730, + #159738,#159746,#159754,#159762,#159770,#159778,#159786,#159794, + #159802,#159810,#159818,#159826,#159834)); +#159557 = ORIENTED_EDGE('',*,*,#159558,.T.); +#159558 = EDGE_CURVE('',#159559,#159561,#159563,.T.); +#159559 = VERTEX_POINT('',#159560); +#159560 = CARTESIAN_POINT('',(187.906918,-108.161789,1.585)); +#159561 = VERTEX_POINT('',#159562); +#159562 = CARTESIAN_POINT('',(188.021065,-108.107693,1.585)); +#159563 = LINE('',#159564,#159565); +#159564 = CARTESIAN_POINT('',(187.906918,-108.161789,1.585)); +#159565 = VECTOR('',#159566,1.); +#159566 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#159567 = ORIENTED_EDGE('',*,*,#159568,.T.); +#159568 = EDGE_CURVE('',#159561,#159569,#159571,.T.); +#159569 = VERTEX_POINT('',#159570); +#159570 = CARTESIAN_POINT('',(188.193186,-108.107693,1.585)); +#159571 = LINE('',#159572,#159573); +#159572 = CARTESIAN_POINT('',(188.021065,-108.107693,1.585)); +#159573 = VECTOR('',#159574,1.); +#159574 = DIRECTION('',(1.,0.,0.)); +#159575 = ORIENTED_EDGE('',*,*,#159576,.T.); +#159576 = EDGE_CURVE('',#159569,#159577,#159579,.T.); +#159577 = VERTEX_POINT('',#159578); +#159578 = CARTESIAN_POINT('',(188.319776,-108.169621,1.585)); +#159579 = LINE('',#159580,#159581); +#159580 = CARTESIAN_POINT('',(188.193186,-108.107693,1.585)); +#159581 = VECTOR('',#159582,1.); +#159582 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#159583 = ORIENTED_EDGE('',*,*,#159584,.T.); +#159584 = EDGE_CURVE('',#159577,#159585,#159587,.T.); +#159585 = VERTEX_POINT('',#159586); +#159586 = CARTESIAN_POINT('',(188.240251,-108.295953,1.585)); +#159587 = CIRCLE('',#159588,7.500029440361E-02); +#159588 = AXIS2_PLACEMENT_3D('',#159589,#159590,#159591); +#159589 = CARTESIAN_POINT('',(188.27379205397,-108.2288706486,1.585)); +#159590 = DIRECTION('',(0.,0.,-1.)); +#159591 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#159592 = ORIENTED_EDGE('',*,*,#159593,.T.); +#159593 = EDGE_CURVE('',#159585,#159594,#159596,.T.); +#159594 = VERTEX_POINT('',#159595); +#159595 = CARTESIAN_POINT('',(188.160849,-108.256252,1.585)); +#159596 = LINE('',#159597,#159598); +#159597 = CARTESIAN_POINT('',(188.240251,-108.295953,1.585)); +#159598 = VECTOR('',#159599,1.); +#159599 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#159600 = ORIENTED_EDGE('',*,*,#159601,.T.); +#159601 = EDGE_CURVE('',#159594,#159602,#159604,.T.); +#159602 = VERTEX_POINT('',#159603); +#159603 = CARTESIAN_POINT('',(188.053402,-108.256252,1.585)); +#159604 = LINE('',#159605,#159606); +#159605 = CARTESIAN_POINT('',(188.160849,-108.256252,1.585)); +#159606 = VECTOR('',#159607,1.); +#159607 = DIRECTION('',(-1.,0.,0.)); +#159608 = ORIENTED_EDGE('',*,*,#159609,.T.); +#159609 = EDGE_CURVE('',#159602,#159610,#159612,.T.); +#159610 = VERTEX_POINT('',#159611); +#159611 = CARTESIAN_POINT('',(187.99636,-108.284772,1.585)); +#159612 = LINE('',#159613,#159614); +#159613 = CARTESIAN_POINT('',(188.053402,-108.256252,1.585)); +#159614 = VECTOR('',#159615,1.); +#159615 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#159616 = ORIENTED_EDGE('',*,*,#159617,.T.); +#159617 = EDGE_CURVE('',#159610,#159618,#159620,.T.); +#159618 = VERTEX_POINT('',#159619); +#159619 = CARTESIAN_POINT('',(187.96784,-108.341814,1.585)); +#159620 = LINE('',#159621,#159622); +#159621 = CARTESIAN_POINT('',(187.99636,-108.284772,1.585)); +#159622 = VECTOR('',#159623,1.); +#159623 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#159624 = ORIENTED_EDGE('',*,*,#159625,.T.); +#159625 = EDGE_CURVE('',#159618,#159626,#159628,.T.); +#159626 = VERTEX_POINT('',#159627); +#159627 = CARTESIAN_POINT('',(187.96784,-108.354023,1.585)); +#159628 = LINE('',#159629,#159630); +#159629 = CARTESIAN_POINT('',(187.96784,-108.341814,1.585)); +#159630 = VECTOR('',#159631,1.); +#159631 = DIRECTION('',(0.,-1.,0.)); +#159632 = ORIENTED_EDGE('',*,*,#159633,.T.); +#159633 = EDGE_CURVE('',#159626,#159634,#159636,.T.); +#159634 = VERTEX_POINT('',#159635); +#159635 = CARTESIAN_POINT('',(187.99636,-108.411064,1.585)); +#159636 = LINE('',#159637,#159638); +#159637 = CARTESIAN_POINT('',(187.96784,-108.354023,1.585)); +#159638 = VECTOR('',#159639,1.); +#159639 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#159640 = ORIENTED_EDGE('',*,*,#159641,.T.); +#159641 = EDGE_CURVE('',#159634,#159642,#159644,.T.); +#159642 = VERTEX_POINT('',#159643); +#159643 = CARTESIAN_POINT('',(188.053402,-108.439585,1.585)); +#159644 = LINE('',#159645,#159646); +#159645 = CARTESIAN_POINT('',(187.99636,-108.411064,1.585)); +#159646 = VECTOR('',#159647,1.); +#159647 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#159648 = ORIENTED_EDGE('',*,*,#159649,.T.); +#159649 = EDGE_CURVE('',#159642,#159650,#159652,.T.); +#159650 = VERTEX_POINT('',#159651); +#159651 = CARTESIAN_POINT('',(188.198363,-108.442248,1.585)); +#159652 = LINE('',#159653,#159654); +#159653 = CARTESIAN_POINT('',(188.053402,-108.439585,1.585)); +#159654 = VECTOR('',#159655,1.); +#159655 = DIRECTION('',(0.999831305828,-1.836735927203E-02,0.)); +#159656 = ORIENTED_EDGE('',*,*,#159657,.T.); +#159657 = EDGE_CURVE('',#159650,#159658,#159660,.T.); +#159658 = VERTEX_POINT('',#159659); +#159659 = CARTESIAN_POINT('',(188.319776,-108.502954,1.585)); +#159660 = LINE('',#159661,#159662); +#159661 = CARTESIAN_POINT('',(188.198363,-108.442248,1.585)); +#159662 = VECTOR('',#159663,1.); +#159663 = DIRECTION('',(0.894428664361,-0.447210648766,0.)); +#159664 = ORIENTED_EDGE('',*,*,#159665,.T.); +#159665 = EDGE_CURVE('',#159658,#159666,#159668,.T.); +#159666 = VERTEX_POINT('',#159667); +#159667 = CARTESIAN_POINT('',(188.340874,-108.528663,1.585)); +#159668 = LINE('',#159669,#159670); +#159669 = CARTESIAN_POINT('',(188.319776,-108.502954,1.585)); +#159670 = VECTOR('',#159671,1.); +#159671 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#159672 = ORIENTED_EDGE('',*,*,#159673,.T.); +#159673 = EDGE_CURVE('',#159666,#159674,#159676,.T.); +#159674 = VERTEX_POINT('',#159675); +#159675 = CARTESIAN_POINT('',(188.39497,-108.64281,1.585)); +#159676 = LINE('',#159677,#159678); +#159677 = CARTESIAN_POINT('',(188.340874,-108.528663,1.585)); +#159678 = VECTOR('',#159679,1.); +#159679 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#159680 = ORIENTED_EDGE('',*,*,#159681,.T.); +#159681 = EDGE_CURVE('',#159674,#159682,#159684,.T.); +#159682 = VERTEX_POINT('',#159683); +#159683 = CARTESIAN_POINT('',(188.393748,-108.72487,1.585)); +#159684 = LINE('',#159685,#159686); +#159685 = CARTESIAN_POINT('',(188.39497,-108.64281,1.585)); +#159686 = VECTOR('',#159687,1.); +#159687 = DIRECTION('',(-1.488989188859E-02,-0.999889139415,0.)); +#159688 = ORIENTED_EDGE('',*,*,#159689,.T.); +#159689 = EDGE_CURVE('',#159682,#159690,#159692,.T.); +#159690 = VERTEX_POINT('',#159691); +#159691 = CARTESIAN_POINT('',(188.333042,-108.846284,1.585)); +#159692 = LINE('',#159693,#159694); +#159693 = CARTESIAN_POINT('',(188.393748,-108.72487,1.585)); +#159694 = VECTOR('',#159695,1.); +#159695 = DIRECTION('',(-0.447207702067,-0.894430137692,0.)); +#159696 = ORIENTED_EDGE('',*,*,#159697,.T.); +#159697 = EDGE_CURVE('',#159690,#159698,#159700,.T.); +#159698 = VERTEX_POINT('',#159699); +#159699 = CARTESIAN_POINT('',(188.307333,-108.867382,1.585)); +#159700 = LINE('',#159701,#159702); +#159701 = CARTESIAN_POINT('',(188.333042,-108.846284,1.585)); +#159702 = VECTOR('',#159703,1.); +#159703 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#159704 = ORIENTED_EDGE('',*,*,#159705,.T.); +#159705 = EDGE_CURVE('',#159698,#159706,#159708,.T.); +#159706 = VERTEX_POINT('',#159707); +#159707 = CARTESIAN_POINT('',(187.846856,-108.85955,1.585)); +#159708 = CIRCLE('',#159709,0.396588066051); +#159709 = AXIS2_PLACEMENT_3D('',#159710,#159711,#159712); +#159710 = CARTESIAN_POINT('',(188.08258553893,-108.54062418,1.585)); +#159711 = DIRECTION('',(-0.,0.,-1.)); +#159712 = DIRECTION('',(0.566702531691,-0.82392247243,-0.)); +#159713 = ORIENTED_EDGE('',*,*,#159714,.T.); +#159714 = EDGE_CURVE('',#159706,#159715,#159717,.T.); +#159715 = VERTEX_POINT('',#159716); +#159716 = CARTESIAN_POINT('',(187.827683,-108.837442,1.585)); +#159717 = LINE('',#159718,#159719); +#159718 = CARTESIAN_POINT('',(187.846856,-108.85955,1.585)); +#159719 = VECTOR('',#159720,1.); +#159720 = DIRECTION('',(-0.655178986933,0.755473689205,0.)); +#159721 = ORIENTED_EDGE('',*,*,#159722,.T.); +#159722 = EDGE_CURVE('',#159715,#159723,#159725,.T.); +#159723 = VERTEX_POINT('',#159724); +#159724 = CARTESIAN_POINT('',(187.926381,-108.733218,1.585)); +#159725 = CIRCLE('',#159726,7.499954050661E-02); +#159726 = AXIS2_PLACEMENT_3D('',#159727,#159728,#159729); +#159727 = CARTESIAN_POINT('',(187.89283928896,-108.8002991799,1.585)); +#159728 = DIRECTION('',(0.,0.,-1.)); +#159729 = DIRECTION('',(-0.868755841989,-0.495240635459,-0.)); +#159730 = ORIENTED_EDGE('',*,*,#159731,.T.); +#159731 = EDGE_CURVE('',#159723,#159732,#159734,.T.); +#159732 = VERTEX_POINT('',#159733); +#159733 = CARTESIAN_POINT('',(188.005783,-108.772919,1.585)); +#159734 = LINE('',#159735,#159736); +#159735 = CARTESIAN_POINT('',(187.926381,-108.733218,1.585)); +#159736 = VECTOR('',#159737,1.); +#159737 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#159738 = ORIENTED_EDGE('',*,*,#159739,.T.); +#159739 = EDGE_CURVE('',#159732,#159740,#159742,.T.); +#159740 = VERTEX_POINT('',#159741); +#159741 = CARTESIAN_POINT('',(188.160849,-108.772919,1.585)); +#159742 = LINE('',#159743,#159744); +#159743 = CARTESIAN_POINT('',(188.005783,-108.772919,1.585)); +#159744 = VECTOR('',#159745,1.); +#159745 = DIRECTION('',(1.,0.,0.)); +#159746 = ORIENTED_EDGE('',*,*,#159747,.T.); +#159747 = EDGE_CURVE('',#159740,#159748,#159750,.T.); +#159748 = VERTEX_POINT('',#159749); +#159749 = CARTESIAN_POINT('',(188.21789,-108.744398,1.585)); +#159750 = LINE('',#159751,#159752); +#159751 = CARTESIAN_POINT('',(188.160849,-108.772919,1.585)); +#159752 = VECTOR('',#159753,1.); +#159753 = DIRECTION('',(0.894424054904,0.447219867637,0.)); +#159754 = ORIENTED_EDGE('',*,*,#159755,.T.); +#159755 = EDGE_CURVE('',#159748,#159756,#159758,.T.); +#159756 = VERTEX_POINT('',#159757); +#159757 = CARTESIAN_POINT('',(188.246411,-108.687356,1.585)); +#159758 = LINE('',#159759,#159760); +#159759 = CARTESIAN_POINT('',(188.21789,-108.744398,1.585)); +#159760 = VECTOR('',#159761,1.); +#159761 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#159762 = ORIENTED_EDGE('',*,*,#159763,.T.); +#159763 = EDGE_CURVE('',#159756,#159764,#159766,.T.); +#159764 = VERTEX_POINT('',#159765); +#159765 = CARTESIAN_POINT('',(188.246411,-108.675147,1.585)); +#159766 = LINE('',#159767,#159768); +#159767 = CARTESIAN_POINT('',(188.246411,-108.687356,1.585)); +#159768 = VECTOR('',#159769,1.); +#159769 = DIRECTION('',(0.,1.,0.)); +#159770 = ORIENTED_EDGE('',*,*,#159771,.T.); +#159771 = EDGE_CURVE('',#159764,#159772,#159774,.T.); +#159772 = VERTEX_POINT('',#159773); +#159773 = CARTESIAN_POINT('',(188.21789,-108.618105,1.585)); +#159774 = LINE('',#159775,#159776); +#159775 = CARTESIAN_POINT('',(188.246411,-108.675147,1.585)); +#159776 = VECTOR('',#159777,1.); +#159777 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#159778 = ORIENTED_EDGE('',*,*,#159779,.T.); +#159779 = EDGE_CURVE('',#159772,#159780,#159782,.T.); +#159780 = VERTEX_POINT('',#159781); +#159781 = CARTESIAN_POINT('',(188.160849,-108.589585,1.585)); +#159782 = LINE('',#159783,#159784); +#159783 = CARTESIAN_POINT('',(188.21789,-108.618105,1.585)); +#159784 = VECTOR('',#159785,1.); +#159785 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#159786 = ORIENTED_EDGE('',*,*,#159787,.T.); +#159787 = EDGE_CURVE('',#159780,#159788,#159790,.T.); +#159788 = VERTEX_POINT('',#159789); +#159789 = CARTESIAN_POINT('',(188.015887,-108.586922,1.585)); +#159790 = LINE('',#159791,#159792); +#159791 = CARTESIAN_POINT('',(188.160849,-108.589585,1.585)); +#159792 = VECTOR('',#159793,1.); +#159793 = DIRECTION('',(-0.999831308155,1.836723261002E-02,0.)); +#159794 = ORIENTED_EDGE('',*,*,#159795,.T.); +#159795 = EDGE_CURVE('',#159788,#159796,#159798,.T.); +#159796 = VERTEX_POINT('',#159797); +#159797 = CARTESIAN_POINT('',(187.894475,-108.526216,1.585)); +#159798 = LINE('',#159799,#159800); +#159799 = CARTESIAN_POINT('',(188.015887,-108.586922,1.585)); +#159800 = VECTOR('',#159801,1.); +#159801 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#159802 = ORIENTED_EDGE('',*,*,#159803,.T.); +#159803 = EDGE_CURVE('',#159796,#159804,#159806,.T.); +#159804 = VERTEX_POINT('',#159805); +#159805 = CARTESIAN_POINT('',(187.873377,-108.500507,1.585)); +#159806 = LINE('',#159807,#159808); +#159807 = CARTESIAN_POINT('',(187.894475,-108.526216,1.585)); +#159808 = VECTOR('',#159809,1.); +#159809 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#159810 = ORIENTED_EDGE('',*,*,#159811,.T.); +#159811 = EDGE_CURVE('',#159804,#159812,#159814,.T.); +#159812 = VERTEX_POINT('',#159813); +#159813 = CARTESIAN_POINT('',(187.819281,-108.38636,1.585)); +#159814 = LINE('',#159815,#159816); +#159815 = CARTESIAN_POINT('',(187.873377,-108.500507,1.585)); +#159816 = VECTOR('',#159817,1.); +#159817 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#159818 = ORIENTED_EDGE('',*,*,#159819,.T.); +#159819 = EDGE_CURVE('',#159812,#159820,#159822,.T.); +#159820 = VERTEX_POINT('',#159821); +#159821 = CARTESIAN_POINT('',(187.820503,-108.3043,1.585)); +#159822 = LINE('',#159823,#159824); +#159823 = CARTESIAN_POINT('',(187.819281,-108.38636,1.585)); +#159824 = VECTOR('',#159825,1.); +#159825 = DIRECTION('',(1.488989188859E-02,0.999889139415,0.)); +#159826 = ORIENTED_EDGE('',*,*,#159827,.T.); +#159827 = EDGE_CURVE('',#159820,#159828,#159830,.T.); +#159828 = VERTEX_POINT('',#159829); +#159829 = CARTESIAN_POINT('',(187.881209,-108.182887,1.585)); +#159830 = LINE('',#159831,#159832); +#159831 = CARTESIAN_POINT('',(187.820503,-108.3043,1.585)); +#159832 = VECTOR('',#159833,1.); +#159833 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#159834 = ORIENTED_EDGE('',*,*,#159835,.T.); +#159835 = EDGE_CURVE('',#159828,#159559,#159836,.T.); +#159836 = LINE('',#159837,#159838); +#159837 = CARTESIAN_POINT('',(187.881209,-108.182887,1.585)); +#159838 = VECTOR('',#159839,1.); +#159839 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#159840 = PLANE('',#159841); +#159841 = AXIS2_PLACEMENT_3D('',#159842,#159843,#159844); +#159842 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159843 = DIRECTION('',(0.,0.,1.)); +#159844 = DIRECTION('',(1.,0.,-0.)); +#159845 = SHELL_BASED_SURFACE_MODEL('',(#159846)); +#159846 = OPEN_SHELL('',(#159847)); +#159847 = ADVANCED_FACE('',(#159848,#159859),#159870,.T.); +#159848 = FACE_BOUND('',#159849,.T.); +#159849 = EDGE_LOOP('',(#159850)); +#159850 = ORIENTED_EDGE('',*,*,#159851,.T.); +#159851 = EDGE_CURVE('',#159852,#159852,#159854,.T.); +#159852 = VERTEX_POINT('',#159853); +#159853 = CARTESIAN_POINT('',(114.20165,-107.3231,1.585)); +#159854 = CIRCLE('',#159855,1.01); +#159855 = AXIS2_PLACEMENT_3D('',#159856,#159857,#159858); +#159856 = CARTESIAN_POINT('',(113.19165,-107.3231,1.585)); +#159857 = DIRECTION('',(0.,0.,1.)); +#159858 = DIRECTION('',(1.,0.,-0.)); +#159859 = FACE_BOUND('',#159860,.F.); +#159860 = EDGE_LOOP('',(#159861)); +#159861 = ORIENTED_EDGE('',*,*,#159862,.T.); +#159862 = EDGE_CURVE('',#159863,#159863,#159865,.T.); +#159863 = VERTEX_POINT('',#159864); +#159864 = CARTESIAN_POINT('',(114.085955,-107.3231,1.585)); +#159865 = CIRCLE('',#159866,0.894305); +#159866 = AXIS2_PLACEMENT_3D('',#159867,#159868,#159869); +#159867 = CARTESIAN_POINT('',(113.19165,-107.3231,1.585)); +#159868 = DIRECTION('',(0.,0.,1.)); +#159869 = DIRECTION('',(1.,0.,-0.)); +#159870 = PLANE('',#159871); +#159871 = AXIS2_PLACEMENT_3D('',#159872,#159873,#159874); +#159872 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159873 = DIRECTION('',(0.,0.,1.)); +#159874 = DIRECTION('',(1.,0.,-0.)); +#159875 = SHELL_BASED_SURFACE_MODEL('',(#159876)); +#159876 = OPEN_SHELL('',(#159877)); +#159877 = ADVANCED_FACE('',(#159878),#159914,.T.); +#159878 = FACE_BOUND('',#159879,.F.); +#159879 = EDGE_LOOP('',(#159880,#159891,#159899,#159908)); +#159880 = ORIENTED_EDGE('',*,*,#159881,.T.); +#159881 = EDGE_CURVE('',#159882,#159884,#159886,.T.); +#159882 = VERTEX_POINT('',#159883); +#159883 = CARTESIAN_POINT('',(97.629392,-107.9056,1.585)); +#159884 = VERTEX_POINT('',#159885); +#159885 = CARTESIAN_POINT('',(97.629392,-107.7856,1.585)); +#159886 = CIRCLE('',#159887,6.000000000043E-02); +#159887 = AXIS2_PLACEMENT_3D('',#159888,#159889,#159890); +#159888 = CARTESIAN_POINT('',(97.629391774412,-107.8456,1.585)); +#159889 = DIRECTION('',(0.,0.,-1.)); +#159890 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#159891 = ORIENTED_EDGE('',*,*,#159892,.T.); +#159892 = EDGE_CURVE('',#159884,#159893,#159895,.T.); +#159893 = VERTEX_POINT('',#159894); +#159894 = CARTESIAN_POINT('',(98.103908,-107.7856,1.585)); +#159895 = LINE('',#159896,#159897); +#159896 = CARTESIAN_POINT('',(97.629392,-107.7856,1.585)); +#159897 = VECTOR('',#159898,1.); +#159898 = DIRECTION('',(1.,0.,0.)); +#159899 = ORIENTED_EDGE('',*,*,#159900,.T.); +#159900 = EDGE_CURVE('',#159893,#159901,#159903,.T.); +#159901 = VERTEX_POINT('',#159902); +#159902 = CARTESIAN_POINT('',(98.103908,-107.9056,1.585)); +#159903 = CIRCLE('',#159904,6.000000000043E-02); +#159904 = AXIS2_PLACEMENT_3D('',#159905,#159906,#159907); +#159905 = CARTESIAN_POINT('',(98.103908225588,-107.8456,1.585)); +#159906 = DIRECTION('',(0.,0.,-1.)); +#159907 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#159908 = ORIENTED_EDGE('',*,*,#159909,.T.); +#159909 = EDGE_CURVE('',#159901,#159882,#159910,.T.); +#159910 = LINE('',#159911,#159912); +#159911 = CARTESIAN_POINT('',(98.103908,-107.9056,1.585)); +#159912 = VECTOR('',#159913,1.); +#159913 = DIRECTION('',(-1.,0.,0.)); +#159914 = PLANE('',#159915); +#159915 = AXIS2_PLACEMENT_3D('',#159916,#159917,#159918); +#159916 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159917 = DIRECTION('',(0.,0.,1.)); +#159918 = DIRECTION('',(1.,0.,-0.)); +#159919 = SHELL_BASED_SURFACE_MODEL('',(#159920)); +#159920 = OPEN_SHELL('',(#159921)); +#159921 = ADVANCED_FACE('',(#159922),#159958,.T.); +#159922 = FACE_BOUND('',#159923,.F.); +#159923 = EDGE_LOOP('',(#159924,#159935,#159943,#159952)); +#159924 = ORIENTED_EDGE('',*,*,#159925,.T.); +#159925 = EDGE_CURVE('',#159926,#159928,#159930,.T.); +#159926 = VERTEX_POINT('',#159927); +#159927 = CARTESIAN_POINT('',(101.629392,-107.9056,1.585)); +#159928 = VERTEX_POINT('',#159929); +#159929 = CARTESIAN_POINT('',(101.629392,-107.7856,1.585)); +#159930 = CIRCLE('',#159931,6.000000000043E-02); +#159931 = AXIS2_PLACEMENT_3D('',#159932,#159933,#159934); +#159932 = CARTESIAN_POINT('',(101.62939177441,-107.8456,1.585)); +#159933 = DIRECTION('',(0.,0.,-1.)); +#159934 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#159935 = ORIENTED_EDGE('',*,*,#159936,.T.); +#159936 = EDGE_CURVE('',#159928,#159937,#159939,.T.); +#159937 = VERTEX_POINT('',#159938); +#159938 = CARTESIAN_POINT('',(102.103908,-107.7856,1.585)); +#159939 = LINE('',#159940,#159941); +#159940 = CARTESIAN_POINT('',(101.629392,-107.7856,1.585)); +#159941 = VECTOR('',#159942,1.); +#159942 = DIRECTION('',(1.,0.,0.)); +#159943 = ORIENTED_EDGE('',*,*,#159944,.T.); +#159944 = EDGE_CURVE('',#159937,#159945,#159947,.T.); +#159945 = VERTEX_POINT('',#159946); +#159946 = CARTESIAN_POINT('',(102.103908,-107.9056,1.585)); +#159947 = CIRCLE('',#159948,6.000000000043E-02); +#159948 = AXIS2_PLACEMENT_3D('',#159949,#159950,#159951); +#159949 = CARTESIAN_POINT('',(102.10390822558,-107.8456,1.585)); +#159950 = DIRECTION('',(0.,0.,-1.)); +#159951 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#159952 = ORIENTED_EDGE('',*,*,#159953,.T.); +#159953 = EDGE_CURVE('',#159945,#159926,#159954,.T.); +#159954 = LINE('',#159955,#159956); +#159955 = CARTESIAN_POINT('',(102.103908,-107.9056,1.585)); +#159956 = VECTOR('',#159957,1.); +#159957 = DIRECTION('',(-1.,0.,0.)); +#159958 = PLANE('',#159959); +#159959 = AXIS2_PLACEMENT_3D('',#159960,#159961,#159962); +#159960 = CARTESIAN_POINT('',(0.,0.,1.585)); +#159961 = DIRECTION('',(0.,0.,1.)); +#159962 = DIRECTION('',(1.,0.,-0.)); +#159963 = SHELL_BASED_SURFACE_MODEL('',(#159964)); +#159964 = OPEN_SHELL('',(#159965)); +#159965 = ADVANCED_FACE('',(#159966),#160002,.T.); +#159966 = FACE_BOUND('',#159967,.F.); +#159967 = EDGE_LOOP('',(#159968,#159979,#159987,#159996)); +#159968 = ORIENTED_EDGE('',*,*,#159969,.T.); +#159969 = EDGE_CURVE('',#159970,#159972,#159974,.T.); +#159970 = VERTEX_POINT('',#159971); +#159971 = CARTESIAN_POINT('',(105.629392,-107.9056,1.585)); +#159972 = VERTEX_POINT('',#159973); +#159973 = CARTESIAN_POINT('',(105.629392,-107.7856,1.585)); +#159974 = CIRCLE('',#159975,6.000000000043E-02); +#159975 = AXIS2_PLACEMENT_3D('',#159976,#159977,#159978); +#159976 = CARTESIAN_POINT('',(105.62939177441,-107.8456,1.585)); +#159977 = DIRECTION('',(0.,0.,-1.)); +#159978 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#159979 = ORIENTED_EDGE('',*,*,#159980,.T.); +#159980 = EDGE_CURVE('',#159972,#159981,#159983,.T.); +#159981 = VERTEX_POINT('',#159982); +#159982 = CARTESIAN_POINT('',(106.103908,-107.7856,1.585)); +#159983 = LINE('',#159984,#159985); +#159984 = CARTESIAN_POINT('',(105.629392,-107.7856,1.585)); +#159985 = VECTOR('',#159986,1.); +#159986 = DIRECTION('',(1.,0.,0.)); +#159987 = ORIENTED_EDGE('',*,*,#159988,.T.); +#159988 = EDGE_CURVE('',#159981,#159989,#159991,.T.); +#159989 = VERTEX_POINT('',#159990); +#159990 = CARTESIAN_POINT('',(106.103908,-107.9056,1.585)); +#159991 = CIRCLE('',#159992,6.000000000043E-02); +#159992 = AXIS2_PLACEMENT_3D('',#159993,#159994,#159995); +#159993 = CARTESIAN_POINT('',(106.10390822558,-107.8456,1.585)); +#159994 = DIRECTION('',(0.,0.,-1.)); +#159995 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#159996 = ORIENTED_EDGE('',*,*,#159997,.T.); +#159997 = EDGE_CURVE('',#159989,#159970,#159998,.T.); +#159998 = LINE('',#159999,#160000); +#159999 = CARTESIAN_POINT('',(106.103908,-107.9056,1.585)); +#160000 = VECTOR('',#160001,1.); +#160001 = DIRECTION('',(-1.,0.,0.)); +#160002 = PLANE('',#160003); +#160003 = AXIS2_PLACEMENT_3D('',#160004,#160005,#160006); +#160004 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160005 = DIRECTION('',(0.,0.,1.)); +#160006 = DIRECTION('',(1.,0.,-0.)); +#160007 = SHELL_BASED_SURFACE_MODEL('',(#160008)); +#160008 = OPEN_SHELL('',(#160009)); +#160009 = ADVANCED_FACE('',(#160010),#160046,.T.); +#160010 = FACE_BOUND('',#160011,.F.); +#160011 = EDGE_LOOP('',(#160012,#160023,#160031,#160040)); +#160012 = ORIENTED_EDGE('',*,*,#160013,.T.); +#160013 = EDGE_CURVE('',#160014,#160016,#160018,.T.); +#160014 = VERTEX_POINT('',#160015); +#160015 = CARTESIAN_POINT('',(179.279392,-107.9056,1.585)); +#160016 = VERTEX_POINT('',#160017); +#160017 = CARTESIAN_POINT('',(179.279392,-107.7856,1.585)); +#160018 = CIRCLE('',#160019,6.000000000043E-02); +#160019 = AXIS2_PLACEMENT_3D('',#160020,#160021,#160022); +#160020 = CARTESIAN_POINT('',(179.27939177441,-107.8456,1.585)); +#160021 = DIRECTION('',(0.,0.,-1.)); +#160022 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#160023 = ORIENTED_EDGE('',*,*,#160024,.T.); +#160024 = EDGE_CURVE('',#160016,#160025,#160027,.T.); +#160025 = VERTEX_POINT('',#160026); +#160026 = CARTESIAN_POINT('',(179.753908,-107.7856,1.585)); +#160027 = LINE('',#160028,#160029); +#160028 = CARTESIAN_POINT('',(179.279392,-107.7856,1.585)); +#160029 = VECTOR('',#160030,1.); +#160030 = DIRECTION('',(1.,0.,0.)); +#160031 = ORIENTED_EDGE('',*,*,#160032,.T.); +#160032 = EDGE_CURVE('',#160025,#160033,#160035,.T.); +#160033 = VERTEX_POINT('',#160034); +#160034 = CARTESIAN_POINT('',(179.753908,-107.9056,1.585)); +#160035 = CIRCLE('',#160036,6.000000000042E-02); +#160036 = AXIS2_PLACEMENT_3D('',#160037,#160038,#160039); +#160037 = CARTESIAN_POINT('',(179.75390822558,-107.8456,1.585)); +#160038 = DIRECTION('',(0.,0.,-1.)); +#160039 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#160040 = ORIENTED_EDGE('',*,*,#160041,.T.); +#160041 = EDGE_CURVE('',#160033,#160014,#160042,.T.); +#160042 = LINE('',#160043,#160044); +#160043 = CARTESIAN_POINT('',(179.753908,-107.9056,1.585)); +#160044 = VECTOR('',#160045,1.); +#160045 = DIRECTION('',(-1.,0.,0.)); +#160046 = PLANE('',#160047); +#160047 = AXIS2_PLACEMENT_3D('',#160048,#160049,#160050); +#160048 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160049 = DIRECTION('',(0.,0.,1.)); +#160050 = DIRECTION('',(1.,0.,-0.)); +#160051 = SHELL_BASED_SURFACE_MODEL('',(#160052)); +#160052 = OPEN_SHELL('',(#160053)); +#160053 = ADVANCED_FACE('',(#160054),#160148,.T.); +#160054 = FACE_BOUND('',#160055,.F.); +#160055 = EDGE_LOOP('',(#160056,#160067,#160075,#160084,#160092,#160101, + #160109,#160118,#160126,#160134,#160142)); +#160056 = ORIENTED_EDGE('',*,*,#160057,.T.); +#160057 = EDGE_CURVE('',#160058,#160060,#160062,.T.); +#160058 = VERTEX_POINT('',#160059); +#160059 = CARTESIAN_POINT('',(93.458717,-106.360139,1.585)); +#160060 = VERTEX_POINT('',#160061); +#160061 = CARTESIAN_POINT('',(93.57415,-106.3831,1.585)); +#160062 = CIRCLE('',#160063,6.000007318648E-02); +#160063 = AXIS2_PLACEMENT_3D('',#160064,#160065,#160066); +#160064 = CARTESIAN_POINT('',(93.514149926814,-106.3830998233,1.585)); +#160065 = DIRECTION('',(0.,0.,-1.)); +#160066 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#160067 = ORIENTED_EDGE('',*,*,#160068,.T.); +#160068 = EDGE_CURVE('',#160060,#160069,#160071,.T.); +#160069 = VERTEX_POINT('',#160070); +#160070 = CARTESIAN_POINT('',(93.57415,-107.3831,1.585)); +#160071 = LINE('',#160072,#160073); +#160072 = CARTESIAN_POINT('',(93.57415,-106.3831,1.585)); +#160073 = VECTOR('',#160074,1.); +#160074 = DIRECTION('',(0.,-1.,0.)); +#160075 = ORIENTED_EDGE('',*,*,#160076,.T.); +#160076 = EDGE_CURVE('',#160069,#160077,#160079,.T.); +#160077 = VERTEX_POINT('',#160078); +#160078 = CARTESIAN_POINT('',(93.51415,-107.4431,1.585)); +#160079 = CIRCLE('',#160080,5.999932016264E-02); +#160080 = AXIS2_PLACEMENT_3D('',#160081,#160082,#160083); +#160081 = CARTESIAN_POINT('',(93.514150679841,-107.3831006798,1.585)); +#160082 = DIRECTION('',(0.,0.,-1.)); +#160083 = DIRECTION('',(0.999999999936,1.133081517402E-05,0.)); +#160084 = ORIENTED_EDGE('',*,*,#160085,.T.); +#160085 = EDGE_CURVE('',#160077,#160086,#160088,.T.); +#160086 = VERTEX_POINT('',#160087); +#160087 = CARTESIAN_POINT('',(91.99415,-107.4431,1.585)); +#160088 = LINE('',#160089,#160090); +#160089 = CARTESIAN_POINT('',(93.51415,-107.4431,1.585)); +#160090 = VECTOR('',#160091,1.); +#160091 = DIRECTION('',(-1.,0.,0.)); +#160092 = ORIENTED_EDGE('',*,*,#160093,.T.); +#160093 = EDGE_CURVE('',#160086,#160094,#160096,.T.); +#160094 = VERTEX_POINT('',#160095); +#160095 = CARTESIAN_POINT('',(91.93415,-107.3831,1.585)); +#160096 = CIRCLE('',#160097,5.999932016257E-02); +#160097 = AXIS2_PLACEMENT_3D('',#160098,#160099,#160100); +#160098 = CARTESIAN_POINT('',(91.994149320159,-107.3831006798,1.585)); +#160099 = DIRECTION('',(0.,0.,-1.)); +#160100 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#160101 = ORIENTED_EDGE('',*,*,#160102,.T.); +#160102 = EDGE_CURVE('',#160094,#160103,#160105,.T.); +#160103 = VERTEX_POINT('',#160104); +#160104 = CARTESIAN_POINT('',(91.93415,-107.3331,1.585)); +#160105 = LINE('',#160106,#160107); +#160106 = CARTESIAN_POINT('',(91.93415,-107.3831,1.585)); +#160107 = VECTOR('',#160108,1.); +#160108 = DIRECTION('',(0.,1.,0.)); +#160109 = ORIENTED_EDGE('',*,*,#160110,.T.); +#160110 = EDGE_CURVE('',#160103,#160111,#160113,.T.); +#160111 = VERTEX_POINT('',#160112); +#160112 = CARTESIAN_POINT('',(92.049583,-107.310139,1.585)); +#160113 = CIRCLE('',#160114,6.000007318647E-02); +#160114 = AXIS2_PLACEMENT_3D('',#160115,#160116,#160117); +#160115 = CARTESIAN_POINT('',(91.994150073186,-107.3330998233,1.585)); +#160116 = DIRECTION('',(0.,0.,-1.)); +#160117 = DIRECTION('',(-0.999999999996,-2.944769485282E-06,-0.)); +#160118 = ORIENTED_EDGE('',*,*,#160119,.T.); +#160119 = EDGE_CURVE('',#160111,#160120,#160122,.T.); +#160120 = VERTEX_POINT('',#160121); +#160121 = CARTESIAN_POINT('',(92.052161,-107.3231,1.585)); +#160122 = LINE('',#160123,#160124); +#160123 = CARTESIAN_POINT('',(92.049583,-107.310139,1.585)); +#160124 = VECTOR('',#160125,1.); +#160125 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#160126 = ORIENTED_EDGE('',*,*,#160127,.T.); +#160127 = EDGE_CURVE('',#160120,#160128,#160130,.T.); +#160128 = VERTEX_POINT('',#160129); +#160129 = CARTESIAN_POINT('',(93.45415,-107.3231,1.585)); +#160130 = LINE('',#160131,#160132); +#160131 = CARTESIAN_POINT('',(92.052161,-107.3231,1.585)); +#160132 = VECTOR('',#160133,1.); +#160133 = DIRECTION('',(1.,0.,0.)); +#160134 = ORIENTED_EDGE('',*,*,#160135,.T.); +#160135 = EDGE_CURVE('',#160128,#160136,#160138,.T.); +#160136 = VERTEX_POINT('',#160137); +#160137 = CARTESIAN_POINT('',(93.45415,-106.3831,1.585)); +#160138 = LINE('',#160139,#160140); +#160139 = CARTESIAN_POINT('',(93.45415,-107.3231,1.585)); +#160140 = VECTOR('',#160141,1.); +#160141 = DIRECTION('',(0.,1.,0.)); +#160142 = ORIENTED_EDGE('',*,*,#160143,.T.); +#160143 = EDGE_CURVE('',#160136,#160058,#160144,.T.); +#160144 = LINE('',#160145,#160146); +#160145 = CARTESIAN_POINT('',(93.45415,-106.3831,1.585)); +#160146 = VECTOR('',#160147,1.); +#160147 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#160148 = PLANE('',#160149); +#160149 = AXIS2_PLACEMENT_3D('',#160150,#160151,#160152); +#160150 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160151 = DIRECTION('',(0.,0.,1.)); +#160152 = DIRECTION('',(1.,0.,-0.)); +#160153 = SHELL_BASED_SURFACE_MODEL('',(#160154)); +#160154 = OPEN_SHELL('',(#160155)); +#160155 = ADVANCED_FACE('',(#160156),#160249,.T.); +#160156 = FACE_BOUND('',#160157,.F.); +#160157 = EDGE_LOOP('',(#160158,#160168,#160176,#160184,#160192,#160200, + #160209,#160217,#160226,#160234,#160243)); +#160158 = ORIENTED_EDGE('',*,*,#160159,.T.); +#160159 = EDGE_CURVE('',#160160,#160162,#160164,.T.); +#160160 = VERTEX_POINT('',#160161); +#160161 = CARTESIAN_POINT('',(122.829346,-106.93888,1.585)); +#160162 = VERTEX_POINT('',#160163); +#160163 = CARTESIAN_POINT('',(122.874405,-106.920216,1.585)); +#160164 = LINE('',#160165,#160166); +#160165 = CARTESIAN_POINT('',(122.829346,-106.93888,1.585)); +#160166 = VECTOR('',#160167,1.); +#160167 = DIRECTION('',(0.923879887046,0.382682576441,0.)); +#160168 = ORIENTED_EDGE('',*,*,#160169,.T.); +#160169 = EDGE_CURVE('',#160162,#160170,#160172,.T.); +#160170 = VERTEX_POINT('',#160171); +#160171 = CARTESIAN_POINT('',(122.923179,-106.920216,1.585)); +#160172 = LINE('',#160173,#160174); +#160173 = CARTESIAN_POINT('',(122.874405,-106.920216,1.585)); +#160174 = VECTOR('',#160175,1.); +#160175 = DIRECTION('',(1.,0.,0.)); +#160176 = ORIENTED_EDGE('',*,*,#160177,.T.); +#160177 = EDGE_CURVE('',#160170,#160178,#160180,.T.); +#160178 = VERTEX_POINT('',#160179); +#160179 = CARTESIAN_POINT('',(122.936376,-106.925682,1.585)); +#160180 = LINE('',#160181,#160182); +#160181 = CARTESIAN_POINT('',(122.923179,-106.920216,1.585)); +#160182 = VECTOR('',#160183,1.); +#160183 = DIRECTION('',(0.923888848229,-0.382660941458,0.)); +#160184 = ORIENTED_EDGE('',*,*,#160185,.T.); +#160185 = EDGE_CURVE('',#160178,#160186,#160188,.T.); +#160186 = VERTEX_POINT('',#160187); +#160187 = CARTESIAN_POINT('',(122.968243,-106.938885,1.585)); +#160188 = LINE('',#160189,#160190); +#160189 = CARTESIAN_POINT('',(122.936376,-106.925682,1.585)); +#160190 = VECTOR('',#160191,1.); +#160191 = DIRECTION('',(0.923846151615,-0.382764011039,0.)); +#160192 = ORIENTED_EDGE('',*,*,#160193,.T.); +#160193 = EDGE_CURVE('',#160186,#160194,#160196,.T.); +#160194 = VERTEX_POINT('',#160195); +#160195 = CARTESIAN_POINT('',(123.088439,-107.059082,1.585)); +#160196 = LINE('',#160197,#160198); +#160197 = CARTESIAN_POINT('',(122.968243,-106.938885,1.585)); +#160198 = VECTOR('',#160199,1.); +#160199 = DIRECTION('',(0.707103839719,-0.707109722642,0.)); +#160200 = ORIENTED_EDGE('',*,*,#160201,.T.); +#160201 = EDGE_CURVE('',#160194,#160202,#160204,.T.); +#160202 = VERTEX_POINT('',#160203); +#160203 = CARTESIAN_POINT('',(123.088439,-107.197974,1.585)); +#160204 = CIRCLE('',#160205,0.124995253133); +#160205 = AXIS2_PLACEMENT_3D('',#160206,#160207,#160208); +#160206 = CARTESIAN_POINT('',(122.984510821,-107.128528,1.585)); +#160207 = DIRECTION('',(0.,0.,-1.)); +#160208 = DIRECTION('',(0.831457006509,0.555589098459,0.)); +#160209 = ORIENTED_EDGE('',*,*,#160210,.T.); +#160210 = EDGE_CURVE('',#160202,#160211,#160213,.T.); +#160211 = VERTEX_POINT('',#160212); +#160212 = CARTESIAN_POINT('',(122.968238,-107.318176,1.585)); +#160213 = LINE('',#160214,#160215); +#160214 = CARTESIAN_POINT('',(123.088439,-107.197974,1.585)); +#160215 = VECTOR('',#160216,1.); +#160216 = DIRECTION('',(-0.707103839841,-0.70710972252,0.)); +#160217 = ORIENTED_EDGE('',*,*,#160218,.T.); +#160218 = EDGE_CURVE('',#160211,#160219,#160221,.T.); +#160219 = VERTEX_POINT('',#160220); +#160220 = CARTESIAN_POINT('',(122.82934,-107.31817,1.585)); +#160221 = CIRCLE('',#160222,0.124997983505); +#160222 = AXIS2_PLACEMENT_3D('',#160223,#160224,#160225); +#160223 = CARTESIAN_POINT('',(122.89879348945,-107.2142435419,1.585)); +#160224 = DIRECTION('',(-0.,0.,-1.)); +#160225 = DIRECTION('',(0.555565046686,-0.831473077676,-0.)); +#160226 = ORIENTED_EDGE('',*,*,#160227,.T.); +#160227 = EDGE_CURVE('',#160219,#160228,#160230,.T.); +#160228 = VERTEX_POINT('',#160229); +#160229 = CARTESIAN_POINT('',(122.709145,-107.197974,1.585)); +#160230 = LINE('',#160231,#160232); +#160231 = CARTESIAN_POINT('',(122.82934,-107.31817,1.585)); +#160232 = VECTOR('',#160233,1.); +#160233 = DIRECTION('',(-0.707103839694,0.707109722667,0.)); +#160234 = ORIENTED_EDGE('',*,*,#160235,.T.); +#160235 = EDGE_CURVE('',#160228,#160236,#160238,.T.); +#160236 = VERTEX_POINT('',#160237); +#160237 = CARTESIAN_POINT('',(122.709145,-107.059082,1.585)); +#160238 = CIRCLE('',#160239,0.124995253133); +#160239 = AXIS2_PLACEMENT_3D('',#160240,#160241,#160242); +#160240 = CARTESIAN_POINT('',(122.81307317899,-107.128528,1.585)); +#160241 = DIRECTION('',(0.,0.,-1.)); +#160242 = DIRECTION('',(-0.831457006509,-0.555589098459,-0.)); +#160243 = ORIENTED_EDGE('',*,*,#160244,.T.); +#160244 = EDGE_CURVE('',#160236,#160160,#160245,.T.); +#160245 = LINE('',#160246,#160247); +#160246 = CARTESIAN_POINT('',(122.709145,-107.059082,1.585)); +#160247 = VECTOR('',#160248,1.); +#160248 = DIRECTION('',(0.707103839841,0.70710972252,0.)); +#160249 = PLANE('',#160250); +#160250 = AXIS2_PLACEMENT_3D('',#160251,#160252,#160253); +#160251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160252 = DIRECTION('',(0.,0.,1.)); +#160253 = DIRECTION('',(1.,0.,-0.)); +#160254 = SHELL_BASED_SURFACE_MODEL('',(#160255)); +#160255 = OPEN_SHELL('',(#160256)); +#160256 = ADVANCED_FACE('',(#160257),#160350,.T.); +#160257 = FACE_BOUND('',#160258,.F.); +#160258 = EDGE_LOOP('',(#160259,#160269,#160277,#160285,#160293,#160301, + #160310,#160318,#160327,#160335,#160344)); +#160259 = ORIENTED_EDGE('',*,*,#160260,.T.); +#160260 = EDGE_CURVE('',#160261,#160263,#160265,.T.); +#160261 = VERTEX_POINT('',#160262); +#160262 = CARTESIAN_POINT('',(133.029346,-106.93888,1.585)); +#160263 = VERTEX_POINT('',#160264); +#160264 = CARTESIAN_POINT('',(133.074405,-106.920216,1.585)); +#160265 = LINE('',#160266,#160267); +#160266 = CARTESIAN_POINT('',(133.029346,-106.93888,1.585)); +#160267 = VECTOR('',#160268,1.); +#160268 = DIRECTION('',(0.923879887046,0.38268257644,0.)); +#160269 = ORIENTED_EDGE('',*,*,#160270,.T.); +#160270 = EDGE_CURVE('',#160263,#160271,#160273,.T.); +#160271 = VERTEX_POINT('',#160272); +#160272 = CARTESIAN_POINT('',(133.123179,-106.920216,1.585)); +#160273 = LINE('',#160274,#160275); +#160274 = CARTESIAN_POINT('',(133.074405,-106.920216,1.585)); +#160275 = VECTOR('',#160276,1.); +#160276 = DIRECTION('',(1.,0.,0.)); +#160277 = ORIENTED_EDGE('',*,*,#160278,.T.); +#160278 = EDGE_CURVE('',#160271,#160279,#160281,.T.); +#160279 = VERTEX_POINT('',#160280); +#160280 = CARTESIAN_POINT('',(133.136376,-106.925682,1.585)); +#160281 = LINE('',#160282,#160283); +#160282 = CARTESIAN_POINT('',(133.123179,-106.920216,1.585)); +#160283 = VECTOR('',#160284,1.); +#160284 = DIRECTION('',(0.92388884823,-0.382660941457,0.)); +#160285 = ORIENTED_EDGE('',*,*,#160286,.T.); +#160286 = EDGE_CURVE('',#160279,#160287,#160289,.T.); +#160287 = VERTEX_POINT('',#160288); +#160288 = CARTESIAN_POINT('',(133.168243,-106.938885,1.585)); +#160289 = LINE('',#160290,#160291); +#160290 = CARTESIAN_POINT('',(133.136376,-106.925682,1.585)); +#160291 = VECTOR('',#160292,1.); +#160292 = DIRECTION('',(0.923846151615,-0.382764011039,0.)); +#160293 = ORIENTED_EDGE('',*,*,#160294,.T.); +#160294 = EDGE_CURVE('',#160287,#160295,#160297,.T.); +#160295 = VERTEX_POINT('',#160296); +#160296 = CARTESIAN_POINT('',(133.288439,-107.059082,1.585)); +#160297 = LINE('',#160298,#160299); +#160298 = CARTESIAN_POINT('',(133.168243,-106.938885,1.585)); +#160299 = VECTOR('',#160300,1.); +#160300 = DIRECTION('',(0.707103839719,-0.707109722642,0.)); +#160301 = ORIENTED_EDGE('',*,*,#160302,.T.); +#160302 = EDGE_CURVE('',#160295,#160303,#160305,.T.); +#160303 = VERTEX_POINT('',#160304); +#160304 = CARTESIAN_POINT('',(133.288439,-107.197974,1.585)); +#160305 = CIRCLE('',#160306,0.124995253133); +#160306 = AXIS2_PLACEMENT_3D('',#160307,#160308,#160309); +#160307 = CARTESIAN_POINT('',(133.184510821,-107.128528,1.585)); +#160308 = DIRECTION('',(0.,0.,-1.)); +#160309 = DIRECTION('',(0.831457006509,0.555589098459,0.)); +#160310 = ORIENTED_EDGE('',*,*,#160311,.T.); +#160311 = EDGE_CURVE('',#160303,#160312,#160314,.T.); +#160312 = VERTEX_POINT('',#160313); +#160313 = CARTESIAN_POINT('',(133.168238,-107.318176,1.585)); +#160314 = LINE('',#160315,#160316); +#160315 = CARTESIAN_POINT('',(133.288439,-107.197974,1.585)); +#160316 = VECTOR('',#160317,1.); +#160317 = DIRECTION('',(-0.707103839841,-0.70710972252,0.)); +#160318 = ORIENTED_EDGE('',*,*,#160319,.T.); +#160319 = EDGE_CURVE('',#160312,#160320,#160322,.T.); +#160320 = VERTEX_POINT('',#160321); +#160321 = CARTESIAN_POINT('',(133.02934,-107.31817,1.585)); +#160322 = CIRCLE('',#160323,0.124997983505); +#160323 = AXIS2_PLACEMENT_3D('',#160324,#160325,#160326); +#160324 = CARTESIAN_POINT('',(133.09879348945,-107.2142435419,1.585)); +#160325 = DIRECTION('',(-0.,0.,-1.)); +#160326 = DIRECTION('',(0.555565046686,-0.831473077676,-0.)); +#160327 = ORIENTED_EDGE('',*,*,#160328,.T.); +#160328 = EDGE_CURVE('',#160320,#160329,#160331,.T.); +#160329 = VERTEX_POINT('',#160330); +#160330 = CARTESIAN_POINT('',(132.909145,-107.197974,1.585)); +#160331 = LINE('',#160332,#160333); +#160332 = CARTESIAN_POINT('',(133.02934,-107.31817,1.585)); +#160333 = VECTOR('',#160334,1.); +#160334 = DIRECTION('',(-0.707103839694,0.707109722667,0.)); +#160335 = ORIENTED_EDGE('',*,*,#160336,.T.); +#160336 = EDGE_CURVE('',#160329,#160337,#160339,.T.); +#160337 = VERTEX_POINT('',#160338); +#160338 = CARTESIAN_POINT('',(132.909145,-107.059082,1.585)); +#160339 = CIRCLE('',#160340,0.124995253133); +#160340 = AXIS2_PLACEMENT_3D('',#160341,#160342,#160343); +#160341 = CARTESIAN_POINT('',(133.01307317899,-107.128528,1.585)); +#160342 = DIRECTION('',(0.,0.,-1.)); +#160343 = DIRECTION('',(-0.831457006509,-0.555589098459,-0.)); +#160344 = ORIENTED_EDGE('',*,*,#160345,.T.); +#160345 = EDGE_CURVE('',#160337,#160261,#160346,.T.); +#160346 = LINE('',#160347,#160348); +#160347 = CARTESIAN_POINT('',(132.909145,-107.059082,1.585)); +#160348 = VECTOR('',#160349,1.); +#160349 = DIRECTION('',(0.707103839841,0.70710972252,0.)); +#160350 = PLANE('',#160351); +#160351 = AXIS2_PLACEMENT_3D('',#160352,#160353,#160354); +#160352 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160353 = DIRECTION('',(0.,0.,1.)); +#160354 = DIRECTION('',(1.,0.,-0.)); +#160355 = SHELL_BASED_SURFACE_MODEL('',(#160356)); +#160356 = OPEN_SHELL('',(#160357)); +#160357 = ADVANCED_FACE('',(#160358),#160394,.T.); +#160358 = FACE_BOUND('',#160359,.F.); +#160359 = EDGE_LOOP('',(#160360,#160371,#160379,#160388)); +#160360 = ORIENTED_EDGE('',*,*,#160361,.T.); +#160361 = EDGE_CURVE('',#160362,#160364,#160366,.T.); +#160362 = VERTEX_POINT('',#160363); +#160363 = CARTESIAN_POINT('',(97.629392,-106.8606,1.585)); +#160364 = VERTEX_POINT('',#160365); +#160365 = CARTESIAN_POINT('',(97.629392,-106.7406,1.585)); +#160366 = CIRCLE('',#160367,6.000000000042E-02); +#160367 = AXIS2_PLACEMENT_3D('',#160368,#160369,#160370); +#160368 = CARTESIAN_POINT('',(97.629391774412,-106.8006,1.585)); +#160369 = DIRECTION('',(0.,0.,-1.)); +#160370 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#160371 = ORIENTED_EDGE('',*,*,#160372,.T.); +#160372 = EDGE_CURVE('',#160364,#160373,#160375,.T.); +#160373 = VERTEX_POINT('',#160374); +#160374 = CARTESIAN_POINT('',(98.103908,-106.7406,1.585)); +#160375 = LINE('',#160376,#160377); +#160376 = CARTESIAN_POINT('',(97.629392,-106.7406,1.585)); +#160377 = VECTOR('',#160378,1.); +#160378 = DIRECTION('',(1.,0.,0.)); +#160379 = ORIENTED_EDGE('',*,*,#160380,.T.); +#160380 = EDGE_CURVE('',#160373,#160381,#160383,.T.); +#160381 = VERTEX_POINT('',#160382); +#160382 = CARTESIAN_POINT('',(98.103908,-106.8606,1.585)); +#160383 = CIRCLE('',#160384,6.000000000043E-02); +#160384 = AXIS2_PLACEMENT_3D('',#160385,#160386,#160387); +#160385 = CARTESIAN_POINT('',(98.103908225588,-106.8006,1.585)); +#160386 = DIRECTION('',(0.,0.,-1.)); +#160387 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#160388 = ORIENTED_EDGE('',*,*,#160389,.T.); +#160389 = EDGE_CURVE('',#160381,#160362,#160390,.T.); +#160390 = LINE('',#160391,#160392); +#160391 = CARTESIAN_POINT('',(98.103908,-106.8606,1.585)); +#160392 = VECTOR('',#160393,1.); +#160393 = DIRECTION('',(-1.,0.,0.)); +#160394 = PLANE('',#160395); +#160395 = AXIS2_PLACEMENT_3D('',#160396,#160397,#160398); +#160396 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160397 = DIRECTION('',(0.,0.,1.)); +#160398 = DIRECTION('',(1.,0.,-0.)); +#160399 = SHELL_BASED_SURFACE_MODEL('',(#160400)); +#160400 = OPEN_SHELL('',(#160401)); +#160401 = ADVANCED_FACE('',(#160402),#160438,.T.); +#160402 = FACE_BOUND('',#160403,.F.); +#160403 = EDGE_LOOP('',(#160404,#160415,#160423,#160432)); +#160404 = ORIENTED_EDGE('',*,*,#160405,.T.); +#160405 = EDGE_CURVE('',#160406,#160408,#160410,.T.); +#160406 = VERTEX_POINT('',#160407); +#160407 = CARTESIAN_POINT('',(101.629392,-106.8606,1.585)); +#160408 = VERTEX_POINT('',#160409); +#160409 = CARTESIAN_POINT('',(101.629392,-106.7406,1.585)); +#160410 = CIRCLE('',#160411,6.000000000042E-02); +#160411 = AXIS2_PLACEMENT_3D('',#160412,#160413,#160414); +#160412 = CARTESIAN_POINT('',(101.62939177441,-106.8006,1.585)); +#160413 = DIRECTION('',(0.,0.,-1.)); +#160414 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#160415 = ORIENTED_EDGE('',*,*,#160416,.T.); +#160416 = EDGE_CURVE('',#160408,#160417,#160419,.T.); +#160417 = VERTEX_POINT('',#160418); +#160418 = CARTESIAN_POINT('',(102.103908,-106.7406,1.585)); +#160419 = LINE('',#160420,#160421); +#160420 = CARTESIAN_POINT('',(101.629392,-106.7406,1.585)); +#160421 = VECTOR('',#160422,1.); +#160422 = DIRECTION('',(1.,0.,0.)); +#160423 = ORIENTED_EDGE('',*,*,#160424,.T.); +#160424 = EDGE_CURVE('',#160417,#160425,#160427,.T.); +#160425 = VERTEX_POINT('',#160426); +#160426 = CARTESIAN_POINT('',(102.103908,-106.8606,1.585)); +#160427 = CIRCLE('',#160428,6.000000000043E-02); +#160428 = AXIS2_PLACEMENT_3D('',#160429,#160430,#160431); +#160429 = CARTESIAN_POINT('',(102.10390822558,-106.8006,1.585)); +#160430 = DIRECTION('',(0.,0.,-1.)); +#160431 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#160432 = ORIENTED_EDGE('',*,*,#160433,.T.); +#160433 = EDGE_CURVE('',#160425,#160406,#160434,.T.); +#160434 = LINE('',#160435,#160436); +#160435 = CARTESIAN_POINT('',(102.103908,-106.8606,1.585)); +#160436 = VECTOR('',#160437,1.); +#160437 = DIRECTION('',(-1.,0.,0.)); +#160438 = PLANE('',#160439); +#160439 = AXIS2_PLACEMENT_3D('',#160440,#160441,#160442); +#160440 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160441 = DIRECTION('',(0.,0.,1.)); +#160442 = DIRECTION('',(1.,0.,-0.)); +#160443 = SHELL_BASED_SURFACE_MODEL('',(#160444)); +#160444 = OPEN_SHELL('',(#160445)); +#160445 = ADVANCED_FACE('',(#160446),#160482,.T.); +#160446 = FACE_BOUND('',#160447,.F.); +#160447 = EDGE_LOOP('',(#160448,#160459,#160467,#160476)); +#160448 = ORIENTED_EDGE('',*,*,#160449,.T.); +#160449 = EDGE_CURVE('',#160450,#160452,#160454,.T.); +#160450 = VERTEX_POINT('',#160451); +#160451 = CARTESIAN_POINT('',(105.629392,-106.8606,1.585)); +#160452 = VERTEX_POINT('',#160453); +#160453 = CARTESIAN_POINT('',(105.629392,-106.7406,1.585)); +#160454 = CIRCLE('',#160455,6.000000000042E-02); +#160455 = AXIS2_PLACEMENT_3D('',#160456,#160457,#160458); +#160456 = CARTESIAN_POINT('',(105.62939177441,-106.8006,1.585)); +#160457 = DIRECTION('',(0.,0.,-1.)); +#160458 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#160459 = ORIENTED_EDGE('',*,*,#160460,.T.); +#160460 = EDGE_CURVE('',#160452,#160461,#160463,.T.); +#160461 = VERTEX_POINT('',#160462); +#160462 = CARTESIAN_POINT('',(106.103908,-106.7406,1.585)); +#160463 = LINE('',#160464,#160465); +#160464 = CARTESIAN_POINT('',(105.629392,-106.7406,1.585)); +#160465 = VECTOR('',#160466,1.); +#160466 = DIRECTION('',(1.,0.,0.)); +#160467 = ORIENTED_EDGE('',*,*,#160468,.T.); +#160468 = EDGE_CURVE('',#160461,#160469,#160471,.T.); +#160469 = VERTEX_POINT('',#160470); +#160470 = CARTESIAN_POINT('',(106.103908,-106.8606,1.585)); +#160471 = CIRCLE('',#160472,6.000000000043E-02); +#160472 = AXIS2_PLACEMENT_3D('',#160473,#160474,#160475); +#160473 = CARTESIAN_POINT('',(106.10390822558,-106.8006,1.585)); +#160474 = DIRECTION('',(0.,0.,-1.)); +#160475 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#160476 = ORIENTED_EDGE('',*,*,#160477,.T.); +#160477 = EDGE_CURVE('',#160469,#160450,#160478,.T.); +#160478 = LINE('',#160479,#160480); +#160479 = CARTESIAN_POINT('',(106.103908,-106.8606,1.585)); +#160480 = VECTOR('',#160481,1.); +#160481 = DIRECTION('',(-1.,0.,0.)); +#160482 = PLANE('',#160483); +#160483 = AXIS2_PLACEMENT_3D('',#160484,#160485,#160486); +#160484 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160485 = DIRECTION('',(0.,0.,1.)); +#160486 = DIRECTION('',(1.,0.,-0.)); +#160487 = SHELL_BASED_SURFACE_MODEL('',(#160488)); +#160488 = OPEN_SHELL('',(#160489)); +#160489 = ADVANCED_FACE('',(#160490),#160526,.T.); +#160490 = FACE_BOUND('',#160491,.F.); +#160491 = EDGE_LOOP('',(#160492,#160503,#160511,#160520)); +#160492 = ORIENTED_EDGE('',*,*,#160493,.T.); +#160493 = EDGE_CURVE('',#160494,#160496,#160498,.T.); +#160494 = VERTEX_POINT('',#160495); +#160495 = CARTESIAN_POINT('',(179.279392,-106.8606,1.585)); +#160496 = VERTEX_POINT('',#160497); +#160497 = CARTESIAN_POINT('',(179.279392,-106.7406,1.585)); +#160498 = CIRCLE('',#160499,6.000000000043E-02); +#160499 = AXIS2_PLACEMENT_3D('',#160500,#160501,#160502); +#160500 = CARTESIAN_POINT('',(179.27939177441,-106.8006,1.585)); +#160501 = DIRECTION('',(0.,0.,-1.)); +#160502 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#160503 = ORIENTED_EDGE('',*,*,#160504,.T.); +#160504 = EDGE_CURVE('',#160496,#160505,#160507,.T.); +#160505 = VERTEX_POINT('',#160506); +#160506 = CARTESIAN_POINT('',(179.753908,-106.7406,1.585)); +#160507 = LINE('',#160508,#160509); +#160508 = CARTESIAN_POINT('',(179.279392,-106.7406,1.585)); +#160509 = VECTOR('',#160510,1.); +#160510 = DIRECTION('',(1.,0.,0.)); +#160511 = ORIENTED_EDGE('',*,*,#160512,.T.); +#160512 = EDGE_CURVE('',#160505,#160513,#160515,.T.); +#160513 = VERTEX_POINT('',#160514); +#160514 = CARTESIAN_POINT('',(179.753908,-106.8606,1.585)); +#160515 = CIRCLE('',#160516,6.000000000042E-02); +#160516 = AXIS2_PLACEMENT_3D('',#160517,#160518,#160519); +#160517 = CARTESIAN_POINT('',(179.75390822558,-106.8006,1.585)); +#160518 = DIRECTION('',(0.,0.,-1.)); +#160519 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#160520 = ORIENTED_EDGE('',*,*,#160521,.T.); +#160521 = EDGE_CURVE('',#160513,#160494,#160522,.T.); +#160522 = LINE('',#160523,#160524); +#160523 = CARTESIAN_POINT('',(179.753908,-106.8606,1.585)); +#160524 = VECTOR('',#160525,1.); +#160525 = DIRECTION('',(-1.,0.,0.)); +#160526 = PLANE('',#160527); +#160527 = AXIS2_PLACEMENT_3D('',#160528,#160529,#160530); +#160528 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160529 = DIRECTION('',(0.,0.,1.)); +#160530 = DIRECTION('',(1.,0.,-0.)); +#160531 = SHELL_BASED_SURFACE_MODEL('',(#160532)); +#160532 = OPEN_SHELL('',(#160533)); +#160533 = ADVANCED_FACE('',(#160534,#160730,#160797),#160849,.T.); +#160534 = FACE_BOUND('',#160535,.F.); +#160535 = EDGE_LOOP('',(#160536,#160547,#160555,#160564,#160572,#160580, + #160588,#160596,#160604,#160612,#160620,#160628,#160636,#160644, + #160652,#160660,#160668,#160676,#160684,#160692,#160700,#160708, + #160716,#160724)); +#160536 = ORIENTED_EDGE('',*,*,#160537,.T.); +#160537 = EDGE_CURVE('',#160538,#160540,#160542,.T.); +#160538 = VERTEX_POINT('',#160539); +#160539 = CARTESIAN_POINT('',(82.565672,-105.001689,1.585)); +#160540 = VERTEX_POINT('',#160541); +#160541 = CARTESIAN_POINT('',(82.683526,-104.883835,1.585)); +#160542 = CIRCLE('',#160543,0.150002525551); +#160543 = AXIS2_PLACEMENT_3D('',#160544,#160545,#160546); +#160544 = CARTESIAN_POINT('',(82.712791899413,-105.0309548994,1.585)); +#160545 = DIRECTION('',(0.,0.,-1.)); +#160546 = DIRECTION('',(-0.980782815972,0.195102711139,0.)); +#160547 = ORIENTED_EDGE('',*,*,#160548,.T.); +#160548 = EDGE_CURVE('',#160540,#160549,#160551,.T.); +#160549 = VERTEX_POINT('',#160550); +#160550 = CARTESIAN_POINT('',(85.342054,-104.883835,1.585)); +#160551 = LINE('',#160552,#160553); +#160552 = CARTESIAN_POINT('',(82.683526,-104.883835,1.585)); +#160553 = VECTOR('',#160554,1.); +#160554 = DIRECTION('',(1.,0.,0.)); +#160555 = ORIENTED_EDGE('',*,*,#160556,.T.); +#160556 = EDGE_CURVE('',#160549,#160557,#160559,.T.); +#160557 = VERTEX_POINT('',#160558); +#160558 = CARTESIAN_POINT('',(85.459908,-105.001689,1.585)); +#160559 = CIRCLE('',#160560,0.150002525551); +#160560 = AXIS2_PLACEMENT_3D('',#160561,#160562,#160563); +#160561 = CARTESIAN_POINT('',(85.312788100587,-105.0309548994,1.585)); +#160562 = DIRECTION('',(0.,0.,-1.)); +#160563 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#160564 = ORIENTED_EDGE('',*,*,#160565,.T.); +#160565 = EDGE_CURVE('',#160557,#160566,#160568,.T.); +#160566 = VERTEX_POINT('',#160567); +#160567 = CARTESIAN_POINT('',(85.459908,-105.926884,1.585)); +#160568 = LINE('',#160569,#160570); +#160569 = CARTESIAN_POINT('',(85.459908,-105.001689,1.585)); +#160570 = VECTOR('',#160571,1.); +#160571 = DIRECTION('',(0.,-1.,0.)); +#160572 = ORIENTED_EDGE('',*,*,#160573,.T.); +#160573 = EDGE_CURVE('',#160566,#160574,#160576,.T.); +#160574 = VERTEX_POINT('',#160575); +#160575 = CARTESIAN_POINT('',(85.446954,-105.964702,1.585)); +#160576 = LINE('',#160577,#160578); +#160577 = CARTESIAN_POINT('',(85.459908,-105.926884,1.585)); +#160578 = VECTOR('',#160579,1.); +#160579 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#160580 = ORIENTED_EDGE('',*,*,#160581,.T.); +#160581 = EDGE_CURVE('',#160574,#160582,#160584,.T.); +#160582 = VERTEX_POINT('',#160583); +#160583 = CARTESIAN_POINT('',(85.307479,-106.237207,1.585)); +#160584 = LINE('',#160585,#160586); +#160585 = CARTESIAN_POINT('',(85.446954,-105.964702,1.585)); +#160586 = VECTOR('',#160587,1.); +#160587 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#160588 = ORIENTED_EDGE('',*,*,#160589,.T.); +#160589 = EDGE_CURVE('',#160582,#160590,#160592,.T.); +#160590 = VERTEX_POINT('',#160591); +#160591 = CARTESIAN_POINT('',(85.148506,-106.393769,1.585)); +#160592 = LINE('',#160593,#160594); +#160593 = CARTESIAN_POINT('',(85.307479,-106.237207,1.585)); +#160594 = VECTOR('',#160595,1.); +#160595 = DIRECTION('',(-0.712488978586,-0.70168330135,0.)); +#160596 = ORIENTED_EDGE('',*,*,#160597,.T.); +#160597 = EDGE_CURVE('',#160590,#160598,#160600,.T.); +#160598 = VERTEX_POINT('',#160599); +#160599 = CARTESIAN_POINT('',(84.857171,-106.537532,1.585)); +#160600 = LINE('',#160601,#160602); +#160601 = CARTESIAN_POINT('',(85.148506,-106.393769,1.585)); +#160602 = VECTOR('',#160603,1.); +#160603 = DIRECTION('',(-0.896759796352,-0.442517646706,0.)); +#160604 = ORIENTED_EDGE('',*,*,#160605,.T.); +#160605 = EDGE_CURVE('',#160598,#160606,#160608,.T.); +#160606 = VERTEX_POINT('',#160607); +#160607 = CARTESIAN_POINT('',(84.817552,-106.542858,1.585)); +#160608 = LINE('',#160609,#160610); +#160609 = CARTESIAN_POINT('',(84.857171,-106.537532,1.585)); +#160610 = VECTOR('',#160611,1.); +#160611 = DIRECTION('',(-0.991084879219,-0.133231986338,0.)); +#160612 = ORIENTED_EDGE('',*,*,#160613,.T.); +#160613 = EDGE_CURVE('',#160606,#160614,#160616,.T.); +#160614 = VERTEX_POINT('',#160615); +#160615 = CARTESIAN_POINT('',(84.540669,-106.539976,1.585)); +#160616 = LINE('',#160617,#160618); +#160617 = CARTESIAN_POINT('',(84.817552,-106.542858,1.585)); +#160618 = VECTOR('',#160619,1.); +#160619 = DIRECTION('',(-0.999945833586,1.040816479305E-02,0.)); +#160620 = ORIENTED_EDGE('',*,*,#160621,.T.); +#160621 = EDGE_CURVE('',#160614,#160622,#160624,.T.); +#160622 = VERTEX_POINT('',#160623); +#160623 = CARTESIAN_POINT('',(84.502851,-106.527022,1.585)); +#160624 = LINE('',#160625,#160626); +#160625 = CARTESIAN_POINT('',(84.540669,-106.539976,1.585)); +#160626 = VECTOR('',#160627,1.); +#160627 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#160628 = ORIENTED_EDGE('',*,*,#160629,.T.); +#160629 = EDGE_CURVE('',#160622,#160630,#160632,.T.); +#160630 = VERTEX_POINT('',#160631); +#160631 = CARTESIAN_POINT('',(84.230346,-106.387547,1.585)); +#160632 = LINE('',#160633,#160634); +#160633 = CARTESIAN_POINT('',(84.502851,-106.527022,1.585)); +#160634 = VECTOR('',#160635,1.); +#160635 = DIRECTION('',(-0.890176840372,0.455615180679,0.)); +#160636 = ORIENTED_EDGE('',*,*,#160637,.T.); +#160637 = EDGE_CURVE('',#160630,#160638,#160640,.T.); +#160638 = VERTEX_POINT('',#160639); +#160639 = CARTESIAN_POINT('',(84.109294,-106.268161,1.585)); +#160640 = LINE('',#160641,#160642); +#160641 = CARTESIAN_POINT('',(84.230346,-106.387547,1.585)); +#160642 = VECTOR('',#160643,1.); +#160643 = DIRECTION('',(-0.711989247494,0.702190366961,0.)); +#160644 = ORIENTED_EDGE('',*,*,#160645,.T.); +#160645 = EDGE_CURVE('',#160638,#160646,#160648,.T.); +#160646 = VERTEX_POINT('',#160647); +#160647 = CARTESIAN_POINT('',(84.075606,-106.352383,1.585)); +#160648 = LINE('',#160649,#160650); +#160649 = CARTESIAN_POINT('',(84.109294,-106.268161,1.585)); +#160650 = VECTOR('',#160651,1.); +#160651 = DIRECTION('',(-0.371383073449,-0.928479732011,0.)); +#160652 = ORIENTED_EDGE('',*,*,#160653,.T.); +#160653 = EDGE_CURVE('',#160646,#160654,#160656,.T.); +#160654 = VERTEX_POINT('',#160655); +#160655 = CARTESIAN_POINT('',(83.910412,-106.517579,1.585)); +#160656 = LINE('',#160657,#160658); +#160657 = CARTESIAN_POINT('',(84.075606,-106.352383,1.585)); +#160658 = VECTOR('',#160659,1.); +#160659 = DIRECTION('',(-0.707102500737,-0.707111061611,0.)); +#160660 = ORIENTED_EDGE('',*,*,#160661,.T.); +#160661 = EDGE_CURVE('',#160654,#160662,#160664,.T.); +#160662 = VERTEX_POINT('',#160663); +#160663 = CARTESIAN_POINT('',(83.619075,-106.661341,1.585)); +#160664 = LINE('',#160665,#160666); +#160665 = CARTESIAN_POINT('',(83.910412,-106.517579,1.585)); +#160666 = VECTOR('',#160667,1.); +#160667 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#160668 = ORIENTED_EDGE('',*,*,#160669,.T.); +#160669 = EDGE_CURVE('',#160662,#160670,#160672,.T.); +#160670 = VERTEX_POINT('',#160671); +#160671 = CARTESIAN_POINT('',(83.579457,-106.666667,1.585)); +#160672 = LINE('',#160673,#160674); +#160673 = CARTESIAN_POINT('',(83.619075,-106.661341,1.585)); +#160674 = VECTOR('',#160675,1.); +#160675 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#160676 = ORIENTED_EDGE('',*,*,#160677,.T.); +#160677 = EDGE_CURVE('',#160670,#160678,#160680,.T.); +#160678 = VERTEX_POINT('',#160679); +#160679 = CARTESIAN_POINT('',(83.178764,-106.663785,1.585)); +#160680 = LINE('',#160681,#160682); +#160681 = CARTESIAN_POINT('',(83.579457,-106.666667,1.585)); +#160682 = VECTOR('',#160683,1.); +#160683 = DIRECTION('',(-0.999974134695,7.192352889099E-03,0.)); +#160684 = ORIENTED_EDGE('',*,*,#160685,.T.); +#160685 = EDGE_CURVE('',#160678,#160686,#160688,.T.); +#160686 = VERTEX_POINT('',#160687); +#160687 = CARTESIAN_POINT('',(83.140946,-106.650831,1.585)); +#160688 = LINE('',#160689,#160690); +#160689 = CARTESIAN_POINT('',(83.178764,-106.663785,1.585)); +#160690 = VECTOR('',#160691,1.); +#160691 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#160692 = ORIENTED_EDGE('',*,*,#160693,.T.); +#160693 = EDGE_CURVE('',#160686,#160694,#160696,.T.); +#160694 = VERTEX_POINT('',#160695); +#160695 = CARTESIAN_POINT('',(82.868442,-106.511357,1.585)); +#160696 = LINE('',#160697,#160698); +#160697 = CARTESIAN_POINT('',(83.140946,-106.650831,1.585)); +#160698 = VECTOR('',#160699,1.); +#160699 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#160700 = ORIENTED_EDGE('',*,*,#160701,.T.); +#160701 = EDGE_CURVE('',#160694,#160702,#160704,.T.); +#160702 = VERTEX_POINT('',#160703); +#160703 = CARTESIAN_POINT('',(82.711879,-106.352383,1.585)); +#160704 = LINE('',#160705,#160706); +#160705 = CARTESIAN_POINT('',(82.868442,-106.511357,1.585)); +#160706 = VECTOR('',#160707,1.); +#160707 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#160708 = ORIENTED_EDGE('',*,*,#160709,.T.); +#160709 = EDGE_CURVE('',#160702,#160710,#160712,.T.); +#160710 = VERTEX_POINT('',#160711); +#160711 = CARTESIAN_POINT('',(82.568116,-106.061048,1.585)); +#160712 = LINE('',#160713,#160714); +#160713 = CARTESIAN_POINT('',(82.711879,-106.352383,1.585)); +#160714 = VECTOR('',#160715,1.); +#160715 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#160716 = ORIENTED_EDGE('',*,*,#160717,.T.); +#160717 = EDGE_CURVE('',#160710,#160718,#160720,.T.); +#160718 = VERTEX_POINT('',#160719); +#160719 = CARTESIAN_POINT('',(82.56279,-106.021429,1.585)); +#160720 = LINE('',#160721,#160722); +#160721 = CARTESIAN_POINT('',(82.568116,-106.061048,1.585)); +#160722 = VECTOR('',#160723,1.); +#160723 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#160724 = ORIENTED_EDGE('',*,*,#160725,.T.); +#160725 = EDGE_CURVE('',#160718,#160538,#160726,.T.); +#160726 = LINE('',#160727,#160728); +#160727 = CARTESIAN_POINT('',(82.56279,-106.021429,1.585)); +#160728 = VECTOR('',#160729,1.); +#160729 = DIRECTION('',(2.826199315639E-03,0.999996006291,0.)); +#160730 = FACE_BOUND('',#160731,.F.); +#160731 = EDGE_LOOP('',(#160732,#160742,#160750,#160758,#160767,#160775, + #160783,#160791)); +#160732 = ORIENTED_EDGE('',*,*,#160733,.T.); +#160733 = EDGE_CURVE('',#160734,#160736,#160738,.T.); +#160734 = VERTEX_POINT('',#160735); +#160735 = CARTESIAN_POINT('',(83.924695,-105.873278,1.585)); +#160736 = VERTEX_POINT('',#160737); +#160737 = CARTESIAN_POINT('',(83.924695,-105.180953,1.585)); +#160738 = LINE('',#160739,#160740); +#160739 = CARTESIAN_POINT('',(83.924695,-105.873278,1.585)); +#160740 = VECTOR('',#160741,1.); +#160741 = DIRECTION('',(0.,1.,0.)); +#160742 = ORIENTED_EDGE('',*,*,#160743,.T.); +#160743 = EDGE_CURVE('',#160736,#160744,#160746,.T.); +#160744 = VERTEX_POINT('',#160745); +#160745 = CARTESIAN_POINT('',(82.86279,-105.180953,1.585)); +#160746 = LINE('',#160747,#160748); +#160747 = CARTESIAN_POINT('',(83.924695,-105.180953,1.585)); +#160748 = VECTOR('',#160749,1.); +#160749 = DIRECTION('',(-1.,0.,0.)); +#160750 = ORIENTED_EDGE('',*,*,#160751,.T.); +#160751 = EDGE_CURVE('',#160744,#160752,#160754,.T.); +#160752 = VERTEX_POINT('',#160753); +#160753 = CARTESIAN_POINT('',(82.86279,-105.986018,1.585)); +#160754 = LINE('',#160755,#160756); +#160755 = CARTESIAN_POINT('',(82.86279,-105.180953,1.585)); +#160756 = VECTOR('',#160757,1.); +#160757 = DIRECTION('',(0.,-1.,0.)); +#160758 = ORIENTED_EDGE('',*,*,#160759,.T.); +#160759 = EDGE_CURVE('',#160752,#160760,#160762,.T.); +#160760 = VERTEX_POINT('',#160761); +#160761 = CARTESIAN_POINT('',(83.243438,-106.366667,1.585)); +#160762 = CIRCLE('',#160763,0.536608239522); +#160763 = AXIS2_PLACEMENT_3D('',#160764,#160765,#160766); +#160764 = CARTESIAN_POINT('',(83.381368724711,-105.8480886376,1.585)); +#160765 = DIRECTION('',(0.,0.,1.)); +#160766 = DIRECTION('',(-0.966400972846,-0.25703921818,0.)); +#160767 = ORIENTED_EDGE('',*,*,#160768,.T.); +#160768 = EDGE_CURVE('',#160760,#160769,#160771,.T.); +#160769 = VERTEX_POINT('',#160770); +#160770 = CARTESIAN_POINT('',(83.544047,-106.366667,1.585)); +#160771 = LINE('',#160772,#160773); +#160772 = CARTESIAN_POINT('',(83.243438,-106.366667,1.585)); +#160773 = VECTOR('',#160774,1.); +#160774 = DIRECTION('',(1.,0.,0.)); +#160775 = ORIENTED_EDGE('',*,*,#160776,.T.); +#160776 = EDGE_CURVE('',#160769,#160777,#160779,.T.); +#160777 = VERTEX_POINT('',#160778); +#160778 = CARTESIAN_POINT('',(83.738221,-106.26958,1.585)); +#160779 = LINE('',#160780,#160781); +#160780 = CARTESIAN_POINT('',(83.544047,-106.366667,1.585)); +#160781 = VECTOR('',#160782,1.); +#160782 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#160783 = ORIENTED_EDGE('',*,*,#160784,.T.); +#160784 = EDGE_CURVE('',#160777,#160785,#160787,.T.); +#160785 = VERTEX_POINT('',#160786); +#160786 = CARTESIAN_POINT('',(83.81978,-106.18802,1.585)); +#160787 = LINE('',#160788,#160789); +#160788 = CARTESIAN_POINT('',(83.738221,-106.26958,1.585)); +#160789 = VECTOR('',#160790,1.); +#160790 = DIRECTION('',(0.70710244626,0.707111116087,0.)); +#160791 = ORIENTED_EDGE('',*,*,#160792,.T.); +#160792 = EDGE_CURVE('',#160785,#160734,#160793,.T.); +#160793 = LINE('',#160794,#160795); +#160794 = CARTESIAN_POINT('',(83.81978,-106.18802,1.585)); +#160795 = VECTOR('',#160796,1.); +#160796 = DIRECTION('',(0.316230478759,0.948682393799,0.)); +#160797 = FACE_BOUND('',#160798,.F.); +#160798 = EDGE_LOOP('',(#160799,#160810,#160818,#160826,#160834,#160843) + ); +#160799 = ORIENTED_EDGE('',*,*,#160800,.T.); +#160800 = EDGE_CURVE('',#160801,#160803,#160805,.T.); +#160801 = VERTEX_POINT('',#160802); +#160802 = CARTESIAN_POINT('',(84.782142,-106.242858,1.585)); +#160803 = VERTEX_POINT('',#160804); +#160804 = CARTESIAN_POINT('',(85.16279,-105.862209,1.585)); +#160805 = CIRCLE('',#160806,0.53661283273); +#160806 = AXIS2_PLACEMENT_3D('',#160807,#160808,#160809); +#160807 = CARTESIAN_POINT('',(84.644207520954,-105.7242758833,1.585)); +#160808 = DIRECTION('',(0.,0.,1.)); +#160809 = DIRECTION('',(0.257046553181,-0.966399021884,0.)); +#160810 = ORIENTED_EDGE('',*,*,#160811,.T.); +#160811 = EDGE_CURVE('',#160803,#160812,#160814,.T.); +#160812 = VERTEX_POINT('',#160813); +#160813 = CARTESIAN_POINT('',(85.16279,-105.180953,1.585)); +#160814 = LINE('',#160815,#160816); +#160815 = CARTESIAN_POINT('',(85.16279,-105.862209,1.585)); +#160816 = VECTOR('',#160817,1.); +#160817 = DIRECTION('',(0.,1.,0.)); +#160818 = ORIENTED_EDGE('',*,*,#160819,.T.); +#160819 = EDGE_CURVE('',#160812,#160820,#160822,.T.); +#160820 = VERTEX_POINT('',#160821); +#160821 = CARTESIAN_POINT('',(84.224695,-105.180953,1.585)); +#160822 = LINE('',#160823,#160824); +#160823 = CARTESIAN_POINT('',(85.16279,-105.180953,1.585)); +#160824 = VECTOR('',#160825,1.); +#160825 = DIRECTION('',(-1.,0.,0.)); +#160826 = ORIENTED_EDGE('',*,*,#160827,.T.); +#160827 = EDGE_CURVE('',#160820,#160828,#160830,.T.); +#160828 = VERTEX_POINT('',#160829); +#160829 = CARTESIAN_POINT('',(84.224695,-105.86221,1.585)); +#160830 = LINE('',#160831,#160832); +#160831 = CARTESIAN_POINT('',(84.224695,-105.180953,1.585)); +#160832 = VECTOR('',#160833,1.); +#160833 = DIRECTION('',(0.,-1.,0.)); +#160834 = ORIENTED_EDGE('',*,*,#160835,.T.); +#160835 = EDGE_CURVE('',#160828,#160836,#160838,.T.); +#160836 = VERTEX_POINT('',#160837); +#160837 = CARTESIAN_POINT('',(84.605344,-106.242858,1.585)); +#160838 = CIRCLE('',#160839,0.536602209951); +#160839 = AXIS2_PLACEMENT_3D('',#160840,#160841,#160842); +#160840 = CARTESIAN_POINT('',(84.743268433983,-105.7242842036,1.585)); +#160841 = DIRECTION('',(0.,0.,1.)); +#160842 = DIRECTION('',(-0.966401972198,-0.257035460845,0.)); +#160843 = ORIENTED_EDGE('',*,*,#160844,.T.); +#160844 = EDGE_CURVE('',#160836,#160801,#160845,.T.); +#160845 = LINE('',#160846,#160847); +#160846 = CARTESIAN_POINT('',(84.605344,-106.242858,1.585)); +#160847 = VECTOR('',#160848,1.); +#160848 = DIRECTION('',(1.,0.,0.)); +#160849 = PLANE('',#160850); +#160850 = AXIS2_PLACEMENT_3D('',#160851,#160852,#160853); +#160851 = CARTESIAN_POINT('',(0.,0.,1.585)); +#160852 = DIRECTION('',(0.,0.,1.)); +#160853 = DIRECTION('',(1.,0.,-0.)); +#160854 = SHELL_BASED_SURFACE_MODEL('',(#160855)); +#160855 = OPEN_SHELL('',(#160856)); +#160856 = ADVANCED_FACE('',(#160857,#160942),#161001,.T.); +#160857 = FACE_BOUND('',#160858,.F.); +#160858 = EDGE_LOOP('',(#160859,#160870,#160878,#160886,#160894,#160903, + #160911,#160920,#160928,#160936)); +#160859 = ORIENTED_EDGE('',*,*,#160860,.T.); +#160860 = EDGE_CURVE('',#160861,#160863,#160865,.T.); +#160861 = VERTEX_POINT('',#160862); +#160862 = CARTESIAN_POINT('',(206.151866,-105.974267,1.585)); +#160863 = VERTEX_POINT('',#160864); +#160864 = CARTESIAN_POINT('',(206.635776,-106.045163,1.585)); +#160865 = CIRCLE('',#160866,0.34461174713); +#160866 = AXIS2_PLACEMENT_3D('',#160867,#160868,#160869); +#160867 = CARTESIAN_POINT('',(206.35862294377,-106.2499639757,1.585)); +#160868 = DIRECTION('',(0.,0.,-1.)); +#160869 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#160870 = ORIENTED_EDGE('',*,*,#160871,.T.); +#160871 = EDGE_CURVE('',#160863,#160872,#160874,.T.); +#160872 = VERTEX_POINT('',#160873); +#160873 = CARTESIAN_POINT('',(206.693837,-106.16561,1.585)); +#160874 = LINE('',#160875,#160876); +#160875 = CARTESIAN_POINT('',(206.635776,-106.045163,1.585)); +#160876 = VECTOR('',#160877,1.); +#160877 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#160878 = ORIENTED_EDGE('',*,*,#160879,.T.); +#160879 = EDGE_CURVE('',#160872,#160880,#160882,.T.); +#160880 = VERTEX_POINT('',#160881); +#160881 = CARTESIAN_POINT('',(206.695278,-106.486194,1.585)); +#160882 = LINE('',#160883,#160884); +#160883 = CARTESIAN_POINT('',(206.693837,-106.16561,1.585)); +#160884 = VECTOR('',#160885,1.); +#160885 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#160886 = ORIENTED_EDGE('',*,*,#160887,.T.); +#160887 = EDGE_CURVE('',#160880,#160888,#160890,.T.); +#160888 = VERTEX_POINT('',#160889); +#160889 = CARTESIAN_POINT('',(207.111101,-106.487635,1.585)); +#160890 = LINE('',#160891,#160892); +#160891 = CARTESIAN_POINT('',(206.695278,-106.486194,1.585)); +#160892 = VECTOR('',#160893,1.); +#160893 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#160894 = ORIENTED_EDGE('',*,*,#160895,.T.); +#160895 = EDGE_CURVE('',#160888,#160896,#160898,.T.); +#160896 = VERTEX_POINT('',#160897); +#160897 = CARTESIAN_POINT('',(207.096469,-106.636194,1.585)); +#160898 = CIRCLE('',#160899,7.500006711464E-02); +#160899 = AXIS2_PLACEMENT_3D('',#160900,#160901,#160902); +#160900 = CARTESIAN_POINT('',(207.09646906711,-106.5611939328,1.585)); +#160901 = DIRECTION('',(0.,0.,-1.)); +#160902 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#160903 = ORIENTED_EDGE('',*,*,#160904,.T.); +#160904 = EDGE_CURVE('',#160896,#160905,#160907,.T.); +#160905 = VERTEX_POINT('',#160906); +#160906 = CARTESIAN_POINT('',(206.081837,-106.634753,1.585)); +#160907 = LINE('',#160908,#160909); +#160908 = CARTESIAN_POINT('',(207.096469,-106.636194,1.585)); +#160909 = VECTOR('',#160910,1.); +#160910 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#160911 = ORIENTED_EDGE('',*,*,#160912,.T.); +#160912 = EDGE_CURVE('',#160905,#160913,#160915,.T.); +#160913 = VERTEX_POINT('',#160914); +#160914 = CARTESIAN_POINT('',(206.021469,-106.561194,1.585)); +#160915 = CIRCLE('',#160916,7.500074938985E-02); +#160916 = AXIS2_PLACEMENT_3D('',#160917,#160918,#160919); +#160917 = CARTESIAN_POINT('',(206.09646974938,-106.5611935338,1.585)); +#160918 = DIRECTION('',(0.,0.,-1.)); +#160919 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#160920 = ORIENTED_EDGE('',*,*,#160921,.T.); +#160921 = EDGE_CURVE('',#160913,#160922,#160924,.T.); +#160922 = VERTEX_POINT('',#160923); +#160923 = CARTESIAN_POINT('',(206.024132,-106.160433,1.585)); +#160924 = LINE('',#160925,#160926); +#160925 = CARTESIAN_POINT('',(206.021469,-106.561194,1.585)); +#160926 = VECTOR('',#160927,1.); +#160927 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#160928 = ORIENTED_EDGE('',*,*,#160929,.T.); +#160929 = EDGE_CURVE('',#160922,#160930,#160932,.T.); +#160930 = VERTEX_POINT('',#160931); +#160931 = CARTESIAN_POINT('',(206.086336,-106.03772,1.585)); +#160932 = LINE('',#160933,#160934); +#160933 = CARTESIAN_POINT('',(206.024132,-106.160433,1.585)); +#160934 = VECTOR('',#160935,1.); +#160935 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#160936 = ORIENTED_EDGE('',*,*,#160937,.T.); +#160937 = EDGE_CURVE('',#160930,#160861,#160938,.T.); +#160938 = LINE('',#160939,#160940); +#160939 = CARTESIAN_POINT('',(206.086336,-106.03772,1.585)); +#160940 = VECTOR('',#160941,1.); +#160941 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#160942 = FACE_BOUND('',#160943,.F.); +#160943 = EDGE_LOOP('',(#160944,#160955,#160963,#160971,#160979,#160987, + #160995)); +#160944 = ORIENTED_EDGE('',*,*,#160945,.T.); +#160945 = EDGE_CURVE('',#160946,#160948,#160950,.T.); +#160946 = VERTEX_POINT('',#160947); +#160947 = CARTESIAN_POINT('',(206.480613,-106.099024,1.585)); +#160948 = VERTEX_POINT('',#160949); +#160949 = CARTESIAN_POINT('',(206.205727,-106.129431,1.585)); +#160950 = CIRCLE('',#160951,0.198386215365); +#160951 = AXIS2_PLACEMENT_3D('',#160952,#160953,#160954); +#160952 = CARTESIAN_POINT('',(206.35880995783,-106.2556161753,1.585)); +#160953 = DIRECTION('',(0.,0.,1.)); +#160954 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#160955 = ORIENTED_EDGE('',*,*,#160956,.T.); +#160956 = EDGE_CURVE('',#160948,#160957,#160959,.T.); +#160957 = VERTEX_POINT('',#160958); +#160958 = CARTESIAN_POINT('',(206.171469,-106.197947,1.585)); +#160959 = LINE('',#160960,#160961); +#160960 = CARTESIAN_POINT('',(206.205727,-106.129431,1.585)); +#160961 = VECTOR('',#160962,1.); +#160962 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#160963 = ORIENTED_EDGE('',*,*,#160964,.T.); +#160964 = EDGE_CURVE('',#160957,#160965,#160967,.T.); +#160965 = VERTEX_POINT('',#160966); +#160966 = CARTESIAN_POINT('',(206.171469,-106.486194,1.585)); +#160967 = LINE('',#160968,#160969); +#160968 = CARTESIAN_POINT('',(206.171469,-106.197947,1.585)); +#160969 = VECTOR('',#160970,1.); +#160970 = DIRECTION('',(0.,-1.,0.)); +#160971 = ORIENTED_EDGE('',*,*,#160972,.T.); +#160972 = EDGE_CURVE('',#160965,#160973,#160975,.T.); +#160973 = VERTEX_POINT('',#160974); +#160974 = CARTESIAN_POINT('',(206.545278,-106.486194,1.585)); +#160975 = LINE('',#160976,#160977); +#160976 = CARTESIAN_POINT('',(206.171469,-106.486194,1.585)); +#160977 = VECTOR('',#160978,1.); +#160978 = DIRECTION('',(1.,0.,0.)); +#160979 = ORIENTED_EDGE('',*,*,#160980,.T.); +#160980 = EDGE_CURVE('',#160973,#160981,#160983,.T.); +#160981 = VERTEX_POINT('',#160982); +#160982 = CARTESIAN_POINT('',(206.545278,-106.197947,1.585)); +#160983 = LINE('',#160984,#160985); +#160984 = CARTESIAN_POINT('',(206.545278,-106.486194,1.585)); +#160985 = VECTOR('',#160986,1.); +#160986 = DIRECTION('',(0.,1.,0.)); +#160987 = ORIENTED_EDGE('',*,*,#160988,.T.); +#160988 = EDGE_CURVE('',#160981,#160989,#160991,.T.); +#160989 = VERTEX_POINT('',#160990); +#160990 = CARTESIAN_POINT('',(206.51102,-106.129431,1.585)); +#160991 = LINE('',#160992,#160993); +#160992 = CARTESIAN_POINT('',(206.545278,-106.197947,1.585)); +#160993 = VECTOR('',#160994,1.); +#160994 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#160995 = ORIENTED_EDGE('',*,*,#160996,.T.); +#160996 = EDGE_CURVE('',#160989,#160946,#160997,.T.); +#160997 = LINE('',#160998,#160999); +#160998 = CARTESIAN_POINT('',(206.51102,-106.129431,1.585)); +#160999 = VECTOR('',#161000,1.); +#161000 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#161001 = PLANE('',#161002); +#161002 = AXIS2_PLACEMENT_3D('',#161003,#161004,#161005); +#161003 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161004 = DIRECTION('',(0.,0.,1.)); +#161005 = DIRECTION('',(1.,0.,-0.)); +#161006 = SHELL_BASED_SURFACE_MODEL('',(#161007)); +#161007 = OPEN_SHELL('',(#161008)); +#161008 = ADVANCED_FACE('',(#161009),#161143,.T.); +#161009 = FACE_BOUND('',#161010,.F.); +#161010 = EDGE_LOOP('',(#161011,#161021,#161029,#161038,#161046,#161054, + #161063,#161071,#161080,#161088,#161096,#161104,#161112,#161121, + #161129,#161137)); +#161011 = ORIENTED_EDGE('',*,*,#161012,.T.); +#161012 = EDGE_CURVE('',#161013,#161015,#161017,.T.); +#161013 = VERTEX_POINT('',#161014); +#161014 = CARTESIAN_POINT('',(180.439752,-105.294941,1.585)); +#161015 = VERTEX_POINT('',#161016); +#161016 = CARTESIAN_POINT('',(180.478208,-105.27436,1.585)); +#161017 = LINE('',#161018,#161019); +#161018 = CARTESIAN_POINT('',(180.439752,-105.294941,1.585)); +#161019 = VECTOR('',#161020,1.); +#161020 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#161021 = ORIENTED_EDGE('',*,*,#161022,.T.); +#161022 = EDGE_CURVE('',#161015,#161023,#161025,.T.); +#161023 = VERTEX_POINT('',#161024); +#161024 = CARTESIAN_POINT('',(180.500045,-105.27436,1.585)); +#161025 = LINE('',#161026,#161027); +#161026 = CARTESIAN_POINT('',(180.478208,-105.27436,1.585)); +#161027 = VECTOR('',#161028,1.); +#161028 = DIRECTION('',(1.,0.,0.)); +#161029 = ORIENTED_EDGE('',*,*,#161030,.T.); +#161030 = EDGE_CURVE('',#161023,#161031,#161033,.T.); +#161031 = VERTEX_POINT('',#161032); +#161032 = CARTESIAN_POINT('',(180.56784,-105.347919,1.585)); +#161033 = CIRCLE('',#161034,7.216898094231E-02); +#161034 = AXIS2_PLACEMENT_3D('',#161035,#161036,#161037); +#161035 = CARTESIAN_POINT('',(180.49568706389,-105.3463972834,1.585)); +#161036 = DIRECTION('',(0.,0.,-1.)); +#161037 = DIRECTION('',(6.038516895301E-02,0.998175150648,0.)); +#161038 = ORIENTED_EDGE('',*,*,#161039,.T.); +#161039 = EDGE_CURVE('',#161031,#161040,#161042,.T.); +#161040 = VERTEX_POINT('',#161041); +#161041 = CARTESIAN_POINT('',(180.56784,-106.272919,1.585)); +#161042 = LINE('',#161043,#161044); +#161043 = CARTESIAN_POINT('',(180.56784,-105.347919,1.585)); +#161044 = VECTOR('',#161045,1.); +#161045 = DIRECTION('',(0.,-1.,0.)); +#161046 = ORIENTED_EDGE('',*,*,#161047,.T.); +#161047 = EDGE_CURVE('',#161040,#161048,#161050,.T.); +#161048 = VERTEX_POINT('',#161049); +#161049 = CARTESIAN_POINT('',(180.793186,-106.27436,1.585)); +#161050 = LINE('',#161051,#161052); +#161051 = CARTESIAN_POINT('',(180.56784,-106.272919,1.585)); +#161052 = VECTOR('',#161053,1.); +#161053 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#161054 = ORIENTED_EDGE('',*,*,#161055,.T.); +#161055 = EDGE_CURVE('',#161048,#161056,#161058,.T.); +#161056 = VERTEX_POINT('',#161057); +#161057 = CARTESIAN_POINT('',(180.778554,-106.422919,1.585)); +#161058 = CIRCLE('',#161059,7.500006711463E-02); +#161059 = AXIS2_PLACEMENT_3D('',#161060,#161061,#161062); +#161060 = CARTESIAN_POINT('',(180.77855406711,-106.3479189328,1.585)); +#161061 = DIRECTION('',(0.,0.,-1.)); +#161062 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#161063 = ORIENTED_EDGE('',*,*,#161064,.T.); +#161064 = EDGE_CURVE('',#161056,#161065,#161067,.T.); +#161065 = VERTEX_POINT('',#161066); +#161066 = CARTESIAN_POINT('',(180.192494,-106.421478,1.585)); +#161067 = LINE('',#161068,#161069); +#161068 = CARTESIAN_POINT('',(180.778554,-106.422919,1.585)); +#161069 = VECTOR('',#161070,1.); +#161070 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#161071 = ORIENTED_EDGE('',*,*,#161072,.T.); +#161072 = EDGE_CURVE('',#161065,#161073,#161075,.T.); +#161073 = VERTEX_POINT('',#161074); +#161074 = CARTESIAN_POINT('',(180.207126,-106.272919,1.585)); +#161075 = CIRCLE('',#161076,7.500006711462E-02); +#161076 = AXIS2_PLACEMENT_3D('',#161077,#161078,#161079); +#161077 = CARTESIAN_POINT('',(180.20712593288,-106.3479190671,1.585)); +#161078 = DIRECTION('',(0.,0.,-1.)); +#161079 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#161080 = ORIENTED_EDGE('',*,*,#161081,.T.); +#161081 = EDGE_CURVE('',#161073,#161082,#161084,.T.); +#161082 = VERTEX_POINT('',#161083); +#161083 = CARTESIAN_POINT('',(180.41784,-106.272919,1.585)); +#161084 = LINE('',#161085,#161086); +#161085 = CARTESIAN_POINT('',(180.207126,-106.272919,1.585)); +#161086 = VECTOR('',#161087,1.); +#161087 = DIRECTION('',(1.,0.,0.)); +#161088 = ORIENTED_EDGE('',*,*,#161089,.T.); +#161089 = EDGE_CURVE('',#161082,#161090,#161092,.T.); +#161090 = VERTEX_POINT('',#161091); +#161091 = CARTESIAN_POINT('',(180.41784,-105.576604,1.585)); +#161092 = LINE('',#161093,#161094); +#161093 = CARTESIAN_POINT('',(180.41784,-106.272919,1.585)); +#161094 = VECTOR('',#161095,1.); +#161095 = DIRECTION('',(0.,1.,0.)); +#161096 = ORIENTED_EDGE('',*,*,#161097,.T.); +#161097 = EDGE_CURVE('',#161090,#161098,#161100,.T.); +#161098 = VERTEX_POINT('',#161099); +#161099 = CARTESIAN_POINT('',(180.342204,-105.649131,1.585)); +#161100 = LINE('',#161101,#161102); +#161101 = CARTESIAN_POINT('',(180.41784,-105.576604,1.585)); +#161102 = VECTOR('',#161103,1.); +#161103 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#161104 = ORIENTED_EDGE('',*,*,#161105,.T.); +#161105 = EDGE_CURVE('',#161098,#161106,#161108,.T.); +#161106 = VERTEX_POINT('',#161107); +#161107 = CARTESIAN_POINT('',(180.226935,-105.70597,1.585)); +#161108 = LINE('',#161109,#161110); +#161109 = CARTESIAN_POINT('',(180.342204,-105.649131,1.585)); +#161110 = VECTOR('',#161111,1.); +#161111 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#161112 = ORIENTED_EDGE('',*,*,#161113,.T.); +#161113 = EDGE_CURVE('',#161106,#161114,#161116,.T.); +#161114 = VERTEX_POINT('',#161115); +#161115 = CARTESIAN_POINT('',(180.173585,-105.566551,1.585)); +#161116 = CIRCLE('',#161117,7.500005272361E-02); +#161117 = AXIS2_PLACEMENT_3D('',#161118,#161119,#161120); +#161118 = CARTESIAN_POINT('',(180.20712555676,-105.6336333297,1.585)); +#161119 = DIRECTION('',(0.,0.,-1.)); +#161120 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#161121 = ORIENTED_EDGE('',*,*,#161122,.T.); +#161122 = EDGE_CURVE('',#161114,#161123,#161125,.T.); +#161123 = VERTEX_POINT('',#161124); +#161124 = CARTESIAN_POINT('',(180.257937,-105.524375,1.585)); +#161125 = LINE('',#161126,#161127); +#161126 = CARTESIAN_POINT('',(180.173585,-105.566551,1.585)); +#161127 = VECTOR('',#161128,1.); +#161128 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#161129 = ORIENTED_EDGE('',*,*,#161130,.T.); +#161130 = EDGE_CURVE('',#161123,#161131,#161133,.T.); +#161131 = VERTEX_POINT('',#161132); +#161132 = CARTESIAN_POINT('',(180.339316,-105.442996,1.585)); +#161133 = LINE('',#161134,#161135); +#161134 = CARTESIAN_POINT('',(180.257937,-105.524375,1.585)); +#161135 = VECTOR('',#161136,1.); +#161136 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#161137 = ORIENTED_EDGE('',*,*,#161138,.T.); +#161138 = EDGE_CURVE('',#161131,#161013,#161139,.T.); +#161139 = LINE('',#161140,#161141); +#161140 = CARTESIAN_POINT('',(180.339316,-105.442996,1.585)); +#161141 = VECTOR('',#161142,1.); +#161142 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#161143 = PLANE('',#161144); +#161144 = AXIS2_PLACEMENT_3D('',#161145,#161146,#161147); +#161145 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161146 = DIRECTION('',(0.,0.,1.)); +#161147 = DIRECTION('',(1.,0.,-0.)); +#161148 = SHELL_BASED_SURFACE_MODEL('',(#161149)); +#161149 = OPEN_SHELL('',(#161150)); +#161150 = ADVANCED_FACE('',(#161151,#161262),#161314,.T.); +#161151 = FACE_BOUND('',#161152,.F.); +#161152 = EDGE_LOOP('',(#161153,#161164,#161172,#161181,#161189,#161198, + #161206,#161214,#161223,#161231,#161239,#161247,#161256)); +#161153 = ORIENTED_EDGE('',*,*,#161154,.T.); +#161154 = EDGE_CURVE('',#161155,#161157,#161159,.T.); +#161155 = VERTEX_POINT('',#161156); +#161156 = CARTESIAN_POINT('',(97.054996,-105.333287,1.585)); +#161157 = VERTEX_POINT('',#161158); +#161158 = CARTESIAN_POINT('',(97.128555,-105.272919,1.585)); +#161159 = CIRCLE('',#161160,7.500074938983E-02); +#161160 = AXIS2_PLACEMENT_3D('',#161161,#161162,#161163); +#161161 = CARTESIAN_POINT('',(97.12855546611,-105.3479197493,1.585)); +#161162 = DIRECTION('',(0.,0.,-1.)); +#161163 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#161164 = ORIENTED_EDGE('',*,*,#161165,.T.); +#161165 = EDGE_CURVE('',#161157,#161166,#161168,.T.); +#161166 = VERTEX_POINT('',#161167); +#161167 = CARTESIAN_POINT('',(97.524139,-105.27436,1.585)); +#161168 = LINE('',#161169,#161170); +#161169 = CARTESIAN_POINT('',(97.128555,-105.272919,1.585)); +#161170 = VECTOR('',#161171,1.); +#161171 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#161172 = ORIENTED_EDGE('',*,*,#161173,.T.); +#161173 = EDGE_CURVE('',#161166,#161174,#161176,.T.); +#161174 = VERTEX_POINT('',#161175); +#161175 = CARTESIAN_POINT('',(97.773542,-105.523763,1.585)); +#161176 = CIRCLE('',#161177,0.347870264855); +#161177 = AXIS2_PLACEMENT_3D('',#161178,#161179,#161180); +#161178 = CARTESIAN_POINT('',(97.436811265028,-105.6110907349,1.585)); +#161179 = DIRECTION('',(0.,0.,-1.)); +#161180 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161181 = ORIENTED_EDGE('',*,*,#161182,.T.); +#161182 = EDGE_CURVE('',#161174,#161183,#161185,.T.); +#161183 = VERTEX_POINT('',#161184); +#161184 = CARTESIAN_POINT('',(97.77232,-105.701062,1.585)); +#161185 = LINE('',#161186,#161187); +#161186 = CARTESIAN_POINT('',(97.773542,-105.523763,1.585)); +#161187 = VECTOR('',#161188,1.); +#161188 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#161189 = ORIENTED_EDGE('',*,*,#161190,.T.); +#161190 = EDGE_CURVE('',#161183,#161191,#161193,.T.); +#161191 = VERTEX_POINT('',#161192); +#161192 = CARTESIAN_POINT('',(97.524139,-105.945287,1.585)); +#161193 = CIRCLE('',#161194,0.348632345848); +#161194 = AXIS2_PLACEMENT_3D('',#161195,#161196,#161197); +#161195 = CARTESIAN_POINT('',(97.436370194038,-105.6078834593,1.585)); +#161196 = DIRECTION('',(0.,0.,-1.)); +#161197 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161198 = ORIENTED_EDGE('',*,*,#161199,.T.); +#161199 = EDGE_CURVE('',#161191,#161200,#161202,.T.); +#161200 = VERTEX_POINT('',#161201); +#161201 = CARTESIAN_POINT('',(97.510622,-105.946618,1.585)); +#161202 = LINE('',#161203,#161204); +#161203 = CARTESIAN_POINT('',(97.524139,-105.945287,1.585)); +#161204 = VECTOR('',#161205,1.); +#161205 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161206 = ORIENTED_EDGE('',*,*,#161207,.T.); +#161207 = EDGE_CURVE('',#161200,#161208,#161210,.T.); +#161208 = VERTEX_POINT('',#161209); +#161209 = CARTESIAN_POINT('',(97.768636,-106.317723,1.585)); +#161210 = LINE('',#161211,#161212); +#161211 = CARTESIAN_POINT('',(97.510622,-105.946618,1.585)); +#161212 = VECTOR('',#161213,1.); +#161213 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161214 = ORIENTED_EDGE('',*,*,#161215,.T.); +#161215 = EDGE_CURVE('',#161208,#161216,#161218,.T.); +#161216 = VERTEX_POINT('',#161217); +#161217 = CARTESIAN_POINT('',(97.638541,-106.390929,1.585)); +#161218 = CIRCLE('',#161219,7.500005951702E-02); +#161219 = AXIS2_PLACEMENT_3D('',#161220,#161221,#161222); +#161220 = CARTESIAN_POINT('',(97.699983062942,-106.3479187473,1.585)); +#161221 = DIRECTION('',(0.,0.,-1.)); +#161222 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161223 = ORIENTED_EDGE('',*,*,#161224,.T.); +#161224 = EDGE_CURVE('',#161216,#161225,#161227,.T.); +#161225 = VERTEX_POINT('',#161226); +#161226 = CARTESIAN_POINT('',(97.327601,-105.946728,1.585)); +#161227 = LINE('',#161228,#161229); +#161228 = CARTESIAN_POINT('',(97.638541,-106.390929,1.585)); +#161229 = VECTOR('',#161230,1.); +#161230 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161231 = ORIENTED_EDGE('',*,*,#161232,.T.); +#161232 = EDGE_CURVE('',#161225,#161233,#161235,.T.); +#161233 = VERTEX_POINT('',#161234); +#161234 = CARTESIAN_POINT('',(97.203555,-105.946728,1.585)); +#161235 = LINE('',#161236,#161237); +#161236 = CARTESIAN_POINT('',(97.327601,-105.946728,1.585)); +#161237 = VECTOR('',#161238,1.); +#161238 = DIRECTION('',(-1.,0.,0.)); +#161239 = ORIENTED_EDGE('',*,*,#161240,.T.); +#161240 = EDGE_CURVE('',#161233,#161241,#161243,.T.); +#161241 = VERTEX_POINT('',#161242); +#161242 = CARTESIAN_POINT('',(97.202114,-106.362551,1.585)); +#161243 = LINE('',#161244,#161245); +#161244 = CARTESIAN_POINT('',(97.203555,-105.946728,1.585)); +#161245 = VECTOR('',#161246,1.); +#161246 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161247 = ORIENTED_EDGE('',*,*,#161248,.T.); +#161248 = EDGE_CURVE('',#161241,#161249,#161251,.T.); +#161249 = VERTEX_POINT('',#161250); +#161250 = CARTESIAN_POINT('',(97.053555,-106.347919,1.585)); +#161251 = CIRCLE('',#161252,7.500006711463E-02); +#161252 = AXIS2_PLACEMENT_3D('',#161253,#161254,#161255); +#161253 = CARTESIAN_POINT('',(97.128555067115,-106.3479190671,1.585)); +#161254 = DIRECTION('',(-0.,0.,-1.)); +#161255 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161256 = ORIENTED_EDGE('',*,*,#161257,.T.); +#161257 = EDGE_CURVE('',#161249,#161155,#161258,.T.); +#161258 = LINE('',#161259,#161260); +#161259 = CARTESIAN_POINT('',(97.053555,-106.347919,1.585)); +#161260 = VECTOR('',#161261,1.); +#161261 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161262 = FACE_BOUND('',#161263,.F.); +#161263 = EDGE_LOOP('',(#161264,#161275,#161283,#161291,#161299,#161308) + ); +#161264 = ORIENTED_EDGE('',*,*,#161265,.T.); +#161265 = EDGE_CURVE('',#161266,#161268,#161270,.T.); +#161266 = VERTEX_POINT('',#161267); +#161267 = CARTESIAN_POINT('',(97.624983,-105.5561,1.585)); +#161268 = VERTEX_POINT('',#161269); +#161269 = CARTESIAN_POINT('',(97.491802,-105.422919,1.585)); +#161270 = CIRCLE('',#161271,0.18686440374); +#161271 = AXIS2_PLACEMENT_3D('',#161272,#161273,#161274); +#161272 = CARTESIAN_POINT('',(97.444266,-105.603636,1.585)); +#161273 = DIRECTION('',(0.,0.,1.)); +#161274 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161275 = ORIENTED_EDGE('',*,*,#161276,.T.); +#161276 = EDGE_CURVE('',#161268,#161277,#161279,.T.); +#161277 = VERTEX_POINT('',#161278); +#161278 = CARTESIAN_POINT('',(97.203555,-105.422919,1.585)); +#161279 = LINE('',#161280,#161281); +#161280 = CARTESIAN_POINT('',(97.491802,-105.422919,1.585)); +#161281 = VECTOR('',#161282,1.); +#161282 = DIRECTION('',(-1.,0.,0.)); +#161283 = ORIENTED_EDGE('',*,*,#161284,.T.); +#161284 = EDGE_CURVE('',#161277,#161285,#161287,.T.); +#161285 = VERTEX_POINT('',#161286); +#161286 = CARTESIAN_POINT('',(97.203555,-105.796728,1.585)); +#161287 = LINE('',#161288,#161289); +#161288 = CARTESIAN_POINT('',(97.203555,-105.422919,1.585)); +#161289 = VECTOR('',#161290,1.); +#161290 = DIRECTION('',(0.,-1.,0.)); +#161291 = ORIENTED_EDGE('',*,*,#161292,.T.); +#161292 = EDGE_CURVE('',#161285,#161293,#161295,.T.); +#161293 = VERTEX_POINT('',#161294); +#161294 = CARTESIAN_POINT('',(97.491802,-105.796728,1.585)); +#161295 = LINE('',#161296,#161297); +#161296 = CARTESIAN_POINT('',(97.203555,-105.796728,1.585)); +#161297 = VECTOR('',#161298,1.); +#161298 = DIRECTION('',(1.,0.,0.)); +#161299 = ORIENTED_EDGE('',*,*,#161300,.T.); +#161300 = EDGE_CURVE('',#161293,#161301,#161303,.T.); +#161301 = VERTEX_POINT('',#161302); +#161302 = CARTESIAN_POINT('',(97.624983,-105.663547,1.585)); +#161303 = CIRCLE('',#161304,0.18686440374); +#161304 = AXIS2_PLACEMENT_3D('',#161305,#161306,#161307); +#161305 = CARTESIAN_POINT('',(97.444266,-105.616011,1.585)); +#161306 = DIRECTION('',(0.,0.,1.)); +#161307 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161308 = ORIENTED_EDGE('',*,*,#161309,.T.); +#161309 = EDGE_CURVE('',#161301,#161266,#161310,.T.); +#161310 = LINE('',#161311,#161312); +#161311 = CARTESIAN_POINT('',(97.624983,-105.663547,1.585)); +#161312 = VECTOR('',#161313,1.); +#161313 = DIRECTION('',(0.,1.,0.)); +#161314 = PLANE('',#161315); +#161315 = AXIS2_PLACEMENT_3D('',#161316,#161317,#161318); +#161316 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161317 = DIRECTION('',(0.,0.,1.)); +#161318 = DIRECTION('',(1.,0.,-0.)); +#161319 = SHELL_BASED_SURFACE_MODEL('',(#161320)); +#161320 = OPEN_SHELL('',(#161321)); +#161321 = ADVANCED_FACE('',(#161322,#161433),#161485,.T.); +#161322 = FACE_BOUND('',#161323,.F.); +#161323 = EDGE_LOOP('',(#161324,#161335,#161343,#161352,#161360,#161369, + #161377,#161385,#161394,#161402,#161410,#161418,#161427)); +#161324 = ORIENTED_EDGE('',*,*,#161325,.T.); +#161325 = EDGE_CURVE('',#161326,#161328,#161330,.T.); +#161326 = VERTEX_POINT('',#161327); +#161327 = CARTESIAN_POINT('',(100.578805,-105.333287,1.585)); +#161328 = VERTEX_POINT('',#161329); +#161329 = CARTESIAN_POINT('',(100.652364,-105.272919,1.585)); +#161330 = CIRCLE('',#161331,7.500074938983E-02); +#161331 = AXIS2_PLACEMENT_3D('',#161332,#161333,#161334); +#161332 = CARTESIAN_POINT('',(100.65236446611,-105.3479197493,1.585)); +#161333 = DIRECTION('',(0.,0.,-1.)); +#161334 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#161335 = ORIENTED_EDGE('',*,*,#161336,.T.); +#161336 = EDGE_CURVE('',#161328,#161337,#161339,.T.); +#161337 = VERTEX_POINT('',#161338); +#161338 = CARTESIAN_POINT('',(101.047948,-105.27436,1.585)); +#161339 = LINE('',#161340,#161341); +#161340 = CARTESIAN_POINT('',(100.652364,-105.272919,1.585)); +#161341 = VECTOR('',#161342,1.); +#161342 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#161343 = ORIENTED_EDGE('',*,*,#161344,.T.); +#161344 = EDGE_CURVE('',#161337,#161345,#161347,.T.); +#161345 = VERTEX_POINT('',#161346); +#161346 = CARTESIAN_POINT('',(101.297351,-105.523763,1.585)); +#161347 = CIRCLE('',#161348,0.347870264855); +#161348 = AXIS2_PLACEMENT_3D('',#161349,#161350,#161351); +#161349 = CARTESIAN_POINT('',(100.96062026502,-105.6110907349,1.585)); +#161350 = DIRECTION('',(0.,0.,-1.)); +#161351 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161352 = ORIENTED_EDGE('',*,*,#161353,.T.); +#161353 = EDGE_CURVE('',#161345,#161354,#161356,.T.); +#161354 = VERTEX_POINT('',#161355); +#161355 = CARTESIAN_POINT('',(101.296129,-105.701062,1.585)); +#161356 = LINE('',#161357,#161358); +#161357 = CARTESIAN_POINT('',(101.297351,-105.523763,1.585)); +#161358 = VECTOR('',#161359,1.); +#161359 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#161360 = ORIENTED_EDGE('',*,*,#161361,.T.); +#161361 = EDGE_CURVE('',#161354,#161362,#161364,.T.); +#161362 = VERTEX_POINT('',#161363); +#161363 = CARTESIAN_POINT('',(101.047948,-105.945287,1.585)); +#161364 = CIRCLE('',#161365,0.348632345848); +#161365 = AXIS2_PLACEMENT_3D('',#161366,#161367,#161368); +#161366 = CARTESIAN_POINT('',(100.96017919403,-105.6078834593,1.585)); +#161367 = DIRECTION('',(0.,0.,-1.)); +#161368 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161369 = ORIENTED_EDGE('',*,*,#161370,.T.); +#161370 = EDGE_CURVE('',#161362,#161371,#161373,.T.); +#161371 = VERTEX_POINT('',#161372); +#161372 = CARTESIAN_POINT('',(101.034431,-105.946618,1.585)); +#161373 = LINE('',#161374,#161375); +#161374 = CARTESIAN_POINT('',(101.047948,-105.945287,1.585)); +#161375 = VECTOR('',#161376,1.); +#161376 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161377 = ORIENTED_EDGE('',*,*,#161378,.T.); +#161378 = EDGE_CURVE('',#161371,#161379,#161381,.T.); +#161379 = VERTEX_POINT('',#161380); +#161380 = CARTESIAN_POINT('',(101.292445,-106.317723,1.585)); +#161381 = LINE('',#161382,#161383); +#161382 = CARTESIAN_POINT('',(101.034431,-105.946618,1.585)); +#161383 = VECTOR('',#161384,1.); +#161384 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161385 = ORIENTED_EDGE('',*,*,#161386,.T.); +#161386 = EDGE_CURVE('',#161379,#161387,#161389,.T.); +#161387 = VERTEX_POINT('',#161388); +#161388 = CARTESIAN_POINT('',(101.16235,-106.390929,1.585)); +#161389 = CIRCLE('',#161390,7.500005951702E-02); +#161390 = AXIS2_PLACEMENT_3D('',#161391,#161392,#161393); +#161391 = CARTESIAN_POINT('',(101.22379206294,-106.3479187473,1.585)); +#161392 = DIRECTION('',(0.,0.,-1.)); +#161393 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161394 = ORIENTED_EDGE('',*,*,#161395,.T.); +#161395 = EDGE_CURVE('',#161387,#161396,#161398,.T.); +#161396 = VERTEX_POINT('',#161397); +#161397 = CARTESIAN_POINT('',(100.85141,-105.946728,1.585)); +#161398 = LINE('',#161399,#161400); +#161399 = CARTESIAN_POINT('',(101.16235,-106.390929,1.585)); +#161400 = VECTOR('',#161401,1.); +#161401 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161402 = ORIENTED_EDGE('',*,*,#161403,.T.); +#161403 = EDGE_CURVE('',#161396,#161404,#161406,.T.); +#161404 = VERTEX_POINT('',#161405); +#161405 = CARTESIAN_POINT('',(100.727364,-105.946728,1.585)); +#161406 = LINE('',#161407,#161408); +#161407 = CARTESIAN_POINT('',(100.85141,-105.946728,1.585)); +#161408 = VECTOR('',#161409,1.); +#161409 = DIRECTION('',(-1.,0.,0.)); +#161410 = ORIENTED_EDGE('',*,*,#161411,.T.); +#161411 = EDGE_CURVE('',#161404,#161412,#161414,.T.); +#161412 = VERTEX_POINT('',#161413); +#161413 = CARTESIAN_POINT('',(100.725923,-106.362551,1.585)); +#161414 = LINE('',#161415,#161416); +#161415 = CARTESIAN_POINT('',(100.727364,-105.946728,1.585)); +#161416 = VECTOR('',#161417,1.); +#161417 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161418 = ORIENTED_EDGE('',*,*,#161419,.T.); +#161419 = EDGE_CURVE('',#161412,#161420,#161422,.T.); +#161420 = VERTEX_POINT('',#161421); +#161421 = CARTESIAN_POINT('',(100.577364,-106.347919,1.585)); +#161422 = CIRCLE('',#161423,7.500006711463E-02); +#161423 = AXIS2_PLACEMENT_3D('',#161424,#161425,#161426); +#161424 = CARTESIAN_POINT('',(100.65236406711,-106.3479190671,1.585)); +#161425 = DIRECTION('',(-0.,0.,-1.)); +#161426 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161427 = ORIENTED_EDGE('',*,*,#161428,.T.); +#161428 = EDGE_CURVE('',#161420,#161326,#161429,.T.); +#161429 = LINE('',#161430,#161431); +#161430 = CARTESIAN_POINT('',(100.577364,-106.347919,1.585)); +#161431 = VECTOR('',#161432,1.); +#161432 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161433 = FACE_BOUND('',#161434,.F.); +#161434 = EDGE_LOOP('',(#161435,#161446,#161454,#161462,#161470,#161479) + ); +#161435 = ORIENTED_EDGE('',*,*,#161436,.T.); +#161436 = EDGE_CURVE('',#161437,#161439,#161441,.T.); +#161437 = VERTEX_POINT('',#161438); +#161438 = CARTESIAN_POINT('',(101.148792,-105.5561,1.585)); +#161439 = VERTEX_POINT('',#161440); +#161440 = CARTESIAN_POINT('',(101.015611,-105.422919,1.585)); +#161441 = CIRCLE('',#161442,0.18686440374); +#161442 = AXIS2_PLACEMENT_3D('',#161443,#161444,#161445); +#161443 = CARTESIAN_POINT('',(100.968075,-105.603636,1.585)); +#161444 = DIRECTION('',(0.,0.,1.)); +#161445 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161446 = ORIENTED_EDGE('',*,*,#161447,.T.); +#161447 = EDGE_CURVE('',#161439,#161448,#161450,.T.); +#161448 = VERTEX_POINT('',#161449); +#161449 = CARTESIAN_POINT('',(100.727364,-105.422919,1.585)); +#161450 = LINE('',#161451,#161452); +#161451 = CARTESIAN_POINT('',(101.015611,-105.422919,1.585)); +#161452 = VECTOR('',#161453,1.); +#161453 = DIRECTION('',(-1.,0.,0.)); +#161454 = ORIENTED_EDGE('',*,*,#161455,.T.); +#161455 = EDGE_CURVE('',#161448,#161456,#161458,.T.); +#161456 = VERTEX_POINT('',#161457); +#161457 = CARTESIAN_POINT('',(100.727364,-105.796728,1.585)); +#161458 = LINE('',#161459,#161460); +#161459 = CARTESIAN_POINT('',(100.727364,-105.422919,1.585)); +#161460 = VECTOR('',#161461,1.); +#161461 = DIRECTION('',(0.,-1.,0.)); +#161462 = ORIENTED_EDGE('',*,*,#161463,.T.); +#161463 = EDGE_CURVE('',#161456,#161464,#161466,.T.); +#161464 = VERTEX_POINT('',#161465); +#161465 = CARTESIAN_POINT('',(101.015611,-105.796728,1.585)); +#161466 = LINE('',#161467,#161468); +#161467 = CARTESIAN_POINT('',(100.727364,-105.796728,1.585)); +#161468 = VECTOR('',#161469,1.); +#161469 = DIRECTION('',(1.,0.,0.)); +#161470 = ORIENTED_EDGE('',*,*,#161471,.T.); +#161471 = EDGE_CURVE('',#161464,#161472,#161474,.T.); +#161472 = VERTEX_POINT('',#161473); +#161473 = CARTESIAN_POINT('',(101.148792,-105.663547,1.585)); +#161474 = CIRCLE('',#161475,0.18686440374); +#161475 = AXIS2_PLACEMENT_3D('',#161476,#161477,#161478); +#161476 = CARTESIAN_POINT('',(100.968075,-105.616011,1.585)); +#161477 = DIRECTION('',(0.,0.,1.)); +#161478 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161479 = ORIENTED_EDGE('',*,*,#161480,.T.); +#161480 = EDGE_CURVE('',#161472,#161437,#161481,.T.); +#161481 = LINE('',#161482,#161483); +#161482 = CARTESIAN_POINT('',(101.148792,-105.663547,1.585)); +#161483 = VECTOR('',#161484,1.); +#161484 = DIRECTION('',(0.,1.,0.)); +#161485 = PLANE('',#161486); +#161486 = AXIS2_PLACEMENT_3D('',#161487,#161488,#161489); +#161487 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161488 = DIRECTION('',(0.,0.,1.)); +#161489 = DIRECTION('',(1.,0.,-0.)); +#161490 = SHELL_BASED_SURFACE_MODEL('',(#161491)); +#161491 = OPEN_SHELL('',(#161492)); +#161492 = ADVANCED_FACE('',(#161493,#161604),#161656,.T.); +#161493 = FACE_BOUND('',#161494,.F.); +#161494 = EDGE_LOOP('',(#161495,#161506,#161514,#161523,#161531,#161540, + #161548,#161556,#161565,#161573,#161581,#161589,#161598)); +#161495 = ORIENTED_EDGE('',*,*,#161496,.T.); +#161496 = EDGE_CURVE('',#161497,#161499,#161501,.T.); +#161497 = VERTEX_POINT('',#161498); +#161498 = CARTESIAN_POINT('',(104.578805,-105.333287,1.585)); +#161499 = VERTEX_POINT('',#161500); +#161500 = CARTESIAN_POINT('',(104.652364,-105.272919,1.585)); +#161501 = CIRCLE('',#161502,7.500074938983E-02); +#161502 = AXIS2_PLACEMENT_3D('',#161503,#161504,#161505); +#161503 = CARTESIAN_POINT('',(104.65236446611,-105.3479197493,1.585)); +#161504 = DIRECTION('',(0.,0.,-1.)); +#161505 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#161506 = ORIENTED_EDGE('',*,*,#161507,.T.); +#161507 = EDGE_CURVE('',#161499,#161508,#161510,.T.); +#161508 = VERTEX_POINT('',#161509); +#161509 = CARTESIAN_POINT('',(105.047948,-105.27436,1.585)); +#161510 = LINE('',#161511,#161512); +#161511 = CARTESIAN_POINT('',(104.652364,-105.272919,1.585)); +#161512 = VECTOR('',#161513,1.); +#161513 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#161514 = ORIENTED_EDGE('',*,*,#161515,.T.); +#161515 = EDGE_CURVE('',#161508,#161516,#161518,.T.); +#161516 = VERTEX_POINT('',#161517); +#161517 = CARTESIAN_POINT('',(105.297351,-105.523763,1.585)); +#161518 = CIRCLE('',#161519,0.347870264855); +#161519 = AXIS2_PLACEMENT_3D('',#161520,#161521,#161522); +#161520 = CARTESIAN_POINT('',(104.96062026502,-105.6110907349,1.585)); +#161521 = DIRECTION('',(0.,0.,-1.)); +#161522 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161523 = ORIENTED_EDGE('',*,*,#161524,.T.); +#161524 = EDGE_CURVE('',#161516,#161525,#161527,.T.); +#161525 = VERTEX_POINT('',#161526); +#161526 = CARTESIAN_POINT('',(105.296129,-105.701062,1.585)); +#161527 = LINE('',#161528,#161529); +#161528 = CARTESIAN_POINT('',(105.297351,-105.523763,1.585)); +#161529 = VECTOR('',#161530,1.); +#161530 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#161531 = ORIENTED_EDGE('',*,*,#161532,.T.); +#161532 = EDGE_CURVE('',#161525,#161533,#161535,.T.); +#161533 = VERTEX_POINT('',#161534); +#161534 = CARTESIAN_POINT('',(105.047948,-105.945287,1.585)); +#161535 = CIRCLE('',#161536,0.348632345848); +#161536 = AXIS2_PLACEMENT_3D('',#161537,#161538,#161539); +#161537 = CARTESIAN_POINT('',(104.96017919403,-105.6078834593,1.585)); +#161538 = DIRECTION('',(0.,0.,-1.)); +#161539 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161540 = ORIENTED_EDGE('',*,*,#161541,.T.); +#161541 = EDGE_CURVE('',#161533,#161542,#161544,.T.); +#161542 = VERTEX_POINT('',#161543); +#161543 = CARTESIAN_POINT('',(105.034431,-105.946618,1.585)); +#161544 = LINE('',#161545,#161546); +#161545 = CARTESIAN_POINT('',(105.047948,-105.945287,1.585)); +#161546 = VECTOR('',#161547,1.); +#161547 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161548 = ORIENTED_EDGE('',*,*,#161549,.T.); +#161549 = EDGE_CURVE('',#161542,#161550,#161552,.T.); +#161550 = VERTEX_POINT('',#161551); +#161551 = CARTESIAN_POINT('',(105.292445,-106.317723,1.585)); +#161552 = LINE('',#161553,#161554); +#161553 = CARTESIAN_POINT('',(105.034431,-105.946618,1.585)); +#161554 = VECTOR('',#161555,1.); +#161555 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161556 = ORIENTED_EDGE('',*,*,#161557,.T.); +#161557 = EDGE_CURVE('',#161550,#161558,#161560,.T.); +#161558 = VERTEX_POINT('',#161559); +#161559 = CARTESIAN_POINT('',(105.16235,-106.390929,1.585)); +#161560 = CIRCLE('',#161561,7.500005951702E-02); +#161561 = AXIS2_PLACEMENT_3D('',#161562,#161563,#161564); +#161562 = CARTESIAN_POINT('',(105.22379206294,-106.3479187473,1.585)); +#161563 = DIRECTION('',(0.,0.,-1.)); +#161564 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161565 = ORIENTED_EDGE('',*,*,#161566,.T.); +#161566 = EDGE_CURVE('',#161558,#161567,#161569,.T.); +#161567 = VERTEX_POINT('',#161568); +#161568 = CARTESIAN_POINT('',(104.85141,-105.946728,1.585)); +#161569 = LINE('',#161570,#161571); +#161570 = CARTESIAN_POINT('',(105.16235,-106.390929,1.585)); +#161571 = VECTOR('',#161572,1.); +#161572 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161573 = ORIENTED_EDGE('',*,*,#161574,.T.); +#161574 = EDGE_CURVE('',#161567,#161575,#161577,.T.); +#161575 = VERTEX_POINT('',#161576); +#161576 = CARTESIAN_POINT('',(104.727364,-105.946728,1.585)); +#161577 = LINE('',#161578,#161579); +#161578 = CARTESIAN_POINT('',(104.85141,-105.946728,1.585)); +#161579 = VECTOR('',#161580,1.); +#161580 = DIRECTION('',(-1.,0.,0.)); +#161581 = ORIENTED_EDGE('',*,*,#161582,.T.); +#161582 = EDGE_CURVE('',#161575,#161583,#161585,.T.); +#161583 = VERTEX_POINT('',#161584); +#161584 = CARTESIAN_POINT('',(104.725923,-106.362551,1.585)); +#161585 = LINE('',#161586,#161587); +#161586 = CARTESIAN_POINT('',(104.727364,-105.946728,1.585)); +#161587 = VECTOR('',#161588,1.); +#161588 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161589 = ORIENTED_EDGE('',*,*,#161590,.T.); +#161590 = EDGE_CURVE('',#161583,#161591,#161593,.T.); +#161591 = VERTEX_POINT('',#161592); +#161592 = CARTESIAN_POINT('',(104.577364,-106.347919,1.585)); +#161593 = CIRCLE('',#161594,7.500006711463E-02); +#161594 = AXIS2_PLACEMENT_3D('',#161595,#161596,#161597); +#161595 = CARTESIAN_POINT('',(104.65236406711,-106.3479190671,1.585)); +#161596 = DIRECTION('',(-0.,0.,-1.)); +#161597 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161598 = ORIENTED_EDGE('',*,*,#161599,.T.); +#161599 = EDGE_CURVE('',#161591,#161497,#161600,.T.); +#161600 = LINE('',#161601,#161602); +#161601 = CARTESIAN_POINT('',(104.577364,-106.347919,1.585)); +#161602 = VECTOR('',#161603,1.); +#161603 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161604 = FACE_BOUND('',#161605,.F.); +#161605 = EDGE_LOOP('',(#161606,#161617,#161625,#161633,#161641,#161650) + ); +#161606 = ORIENTED_EDGE('',*,*,#161607,.T.); +#161607 = EDGE_CURVE('',#161608,#161610,#161612,.T.); +#161608 = VERTEX_POINT('',#161609); +#161609 = CARTESIAN_POINT('',(105.148792,-105.5561,1.585)); +#161610 = VERTEX_POINT('',#161611); +#161611 = CARTESIAN_POINT('',(105.015611,-105.422919,1.585)); +#161612 = CIRCLE('',#161613,0.18686440374); +#161613 = AXIS2_PLACEMENT_3D('',#161614,#161615,#161616); +#161614 = CARTESIAN_POINT('',(104.968075,-105.603636,1.585)); +#161615 = DIRECTION('',(0.,0.,1.)); +#161616 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161617 = ORIENTED_EDGE('',*,*,#161618,.T.); +#161618 = EDGE_CURVE('',#161610,#161619,#161621,.T.); +#161619 = VERTEX_POINT('',#161620); +#161620 = CARTESIAN_POINT('',(104.727364,-105.422919,1.585)); +#161621 = LINE('',#161622,#161623); +#161622 = CARTESIAN_POINT('',(105.015611,-105.422919,1.585)); +#161623 = VECTOR('',#161624,1.); +#161624 = DIRECTION('',(-1.,0.,0.)); +#161625 = ORIENTED_EDGE('',*,*,#161626,.T.); +#161626 = EDGE_CURVE('',#161619,#161627,#161629,.T.); +#161627 = VERTEX_POINT('',#161628); +#161628 = CARTESIAN_POINT('',(104.727364,-105.796728,1.585)); +#161629 = LINE('',#161630,#161631); +#161630 = CARTESIAN_POINT('',(104.727364,-105.422919,1.585)); +#161631 = VECTOR('',#161632,1.); +#161632 = DIRECTION('',(0.,-1.,0.)); +#161633 = ORIENTED_EDGE('',*,*,#161634,.T.); +#161634 = EDGE_CURVE('',#161627,#161635,#161637,.T.); +#161635 = VERTEX_POINT('',#161636); +#161636 = CARTESIAN_POINT('',(105.015611,-105.796728,1.585)); +#161637 = LINE('',#161638,#161639); +#161638 = CARTESIAN_POINT('',(104.727364,-105.796728,1.585)); +#161639 = VECTOR('',#161640,1.); +#161640 = DIRECTION('',(1.,0.,0.)); +#161641 = ORIENTED_EDGE('',*,*,#161642,.T.); +#161642 = EDGE_CURVE('',#161635,#161643,#161645,.T.); +#161643 = VERTEX_POINT('',#161644); +#161644 = CARTESIAN_POINT('',(105.148792,-105.663547,1.585)); +#161645 = CIRCLE('',#161646,0.18686440374); +#161646 = AXIS2_PLACEMENT_3D('',#161647,#161648,#161649); +#161647 = CARTESIAN_POINT('',(104.968075,-105.616011,1.585)); +#161648 = DIRECTION('',(0.,0.,1.)); +#161649 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161650 = ORIENTED_EDGE('',*,*,#161651,.T.); +#161651 = EDGE_CURVE('',#161643,#161608,#161652,.T.); +#161652 = LINE('',#161653,#161654); +#161653 = CARTESIAN_POINT('',(105.148792,-105.663547,1.585)); +#161654 = VECTOR('',#161655,1.); +#161655 = DIRECTION('',(0.,1.,0.)); +#161656 = PLANE('',#161657); +#161657 = AXIS2_PLACEMENT_3D('',#161658,#161659,#161660); +#161658 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161659 = DIRECTION('',(0.,0.,1.)); +#161660 = DIRECTION('',(1.,0.,-0.)); +#161661 = SHELL_BASED_SURFACE_MODEL('',(#161662)); +#161662 = OPEN_SHELL('',(#161663)); +#161663 = ADVANCED_FACE('',(#161664,#161775),#161827,.T.); +#161664 = FACE_BOUND('',#161665,.F.); +#161665 = EDGE_LOOP('',(#161666,#161677,#161685,#161694,#161702,#161711, + #161719,#161727,#161736,#161744,#161752,#161760,#161769)); +#161666 = ORIENTED_EDGE('',*,*,#161667,.T.); +#161667 = EDGE_CURVE('',#161668,#161670,#161672,.T.); +#161668 = VERTEX_POINT('',#161669); +#161669 = CARTESIAN_POINT('',(178.228805,-105.333287,1.585)); +#161670 = VERTEX_POINT('',#161671); +#161671 = CARTESIAN_POINT('',(178.302364,-105.272919,1.585)); +#161672 = CIRCLE('',#161673,7.500074938989E-02); +#161673 = AXIS2_PLACEMENT_3D('',#161674,#161675,#161676); +#161674 = CARTESIAN_POINT('',(178.30236446611,-105.3479197493,1.585)); +#161675 = DIRECTION('',(0.,0.,-1.)); +#161676 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#161677 = ORIENTED_EDGE('',*,*,#161678,.T.); +#161678 = EDGE_CURVE('',#161670,#161679,#161681,.T.); +#161679 = VERTEX_POINT('',#161680); +#161680 = CARTESIAN_POINT('',(178.697948,-105.27436,1.585)); +#161681 = LINE('',#161682,#161683); +#161682 = CARTESIAN_POINT('',(178.302364,-105.272919,1.585)); +#161683 = VECTOR('',#161684,1.); +#161684 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#161685 = ORIENTED_EDGE('',*,*,#161686,.T.); +#161686 = EDGE_CURVE('',#161679,#161687,#161689,.T.); +#161687 = VERTEX_POINT('',#161688); +#161688 = CARTESIAN_POINT('',(178.947351,-105.523763,1.585)); +#161689 = CIRCLE('',#161690,0.347870264855); +#161690 = AXIS2_PLACEMENT_3D('',#161691,#161692,#161693); +#161691 = CARTESIAN_POINT('',(178.61062026502,-105.6110907349,1.585)); +#161692 = DIRECTION('',(0.,0.,-1.)); +#161693 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#161694 = ORIENTED_EDGE('',*,*,#161695,.T.); +#161695 = EDGE_CURVE('',#161687,#161696,#161698,.T.); +#161696 = VERTEX_POINT('',#161697); +#161697 = CARTESIAN_POINT('',(178.946129,-105.701062,1.585)); +#161698 = LINE('',#161699,#161700); +#161699 = CARTESIAN_POINT('',(178.947351,-105.523763,1.585)); +#161700 = VECTOR('',#161701,1.); +#161701 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#161702 = ORIENTED_EDGE('',*,*,#161703,.T.); +#161703 = EDGE_CURVE('',#161696,#161704,#161706,.T.); +#161704 = VERTEX_POINT('',#161705); +#161705 = CARTESIAN_POINT('',(178.697948,-105.945287,1.585)); +#161706 = CIRCLE('',#161707,0.348632345849); +#161707 = AXIS2_PLACEMENT_3D('',#161708,#161709,#161710); +#161708 = CARTESIAN_POINT('',(178.61017919403,-105.6078834593,1.585)); +#161709 = DIRECTION('',(0.,0.,-1.)); +#161710 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#161711 = ORIENTED_EDGE('',*,*,#161712,.T.); +#161712 = EDGE_CURVE('',#161704,#161713,#161715,.T.); +#161713 = VERTEX_POINT('',#161714); +#161714 = CARTESIAN_POINT('',(178.684431,-105.946618,1.585)); +#161715 = LINE('',#161716,#161717); +#161716 = CARTESIAN_POINT('',(178.697948,-105.945287,1.585)); +#161717 = VECTOR('',#161718,1.); +#161718 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#161719 = ORIENTED_EDGE('',*,*,#161720,.T.); +#161720 = EDGE_CURVE('',#161713,#161721,#161723,.T.); +#161721 = VERTEX_POINT('',#161722); +#161722 = CARTESIAN_POINT('',(178.942445,-106.317723,1.585)); +#161723 = LINE('',#161724,#161725); +#161724 = CARTESIAN_POINT('',(178.684431,-105.946618,1.585)); +#161725 = VECTOR('',#161726,1.); +#161726 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#161727 = ORIENTED_EDGE('',*,*,#161728,.T.); +#161728 = EDGE_CURVE('',#161721,#161729,#161731,.T.); +#161729 = VERTEX_POINT('',#161730); +#161730 = CARTESIAN_POINT('',(178.81235,-106.390929,1.585)); +#161731 = CIRCLE('',#161732,7.500005951702E-02); +#161732 = AXIS2_PLACEMENT_3D('',#161733,#161734,#161735); +#161733 = CARTESIAN_POINT('',(178.87379206294,-106.3479187473,1.585)); +#161734 = DIRECTION('',(0.,0.,-1.)); +#161735 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#161736 = ORIENTED_EDGE('',*,*,#161737,.T.); +#161737 = EDGE_CURVE('',#161729,#161738,#161740,.T.); +#161738 = VERTEX_POINT('',#161739); +#161739 = CARTESIAN_POINT('',(178.50141,-105.946728,1.585)); +#161740 = LINE('',#161741,#161742); +#161741 = CARTESIAN_POINT('',(178.81235,-106.390929,1.585)); +#161742 = VECTOR('',#161743,1.); +#161743 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#161744 = ORIENTED_EDGE('',*,*,#161745,.T.); +#161745 = EDGE_CURVE('',#161738,#161746,#161748,.T.); +#161746 = VERTEX_POINT('',#161747); +#161747 = CARTESIAN_POINT('',(178.377364,-105.946728,1.585)); +#161748 = LINE('',#161749,#161750); +#161749 = CARTESIAN_POINT('',(178.50141,-105.946728,1.585)); +#161750 = VECTOR('',#161751,1.); +#161751 = DIRECTION('',(-1.,0.,0.)); +#161752 = ORIENTED_EDGE('',*,*,#161753,.T.); +#161753 = EDGE_CURVE('',#161746,#161754,#161756,.T.); +#161754 = VERTEX_POINT('',#161755); +#161755 = CARTESIAN_POINT('',(178.375923,-106.362551,1.585)); +#161756 = LINE('',#161757,#161758); +#161757 = CARTESIAN_POINT('',(178.377364,-105.946728,1.585)); +#161758 = VECTOR('',#161759,1.); +#161759 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#161760 = ORIENTED_EDGE('',*,*,#161761,.T.); +#161761 = EDGE_CURVE('',#161754,#161762,#161764,.T.); +#161762 = VERTEX_POINT('',#161763); +#161763 = CARTESIAN_POINT('',(178.227364,-106.347919,1.585)); +#161764 = CIRCLE('',#161765,7.500006711464E-02); +#161765 = AXIS2_PLACEMENT_3D('',#161766,#161767,#161768); +#161766 = CARTESIAN_POINT('',(178.30236406711,-106.3479190671,1.585)); +#161767 = DIRECTION('',(-0.,0.,-1.)); +#161768 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#161769 = ORIENTED_EDGE('',*,*,#161770,.T.); +#161770 = EDGE_CURVE('',#161762,#161668,#161771,.T.); +#161771 = LINE('',#161772,#161773); +#161772 = CARTESIAN_POINT('',(178.227364,-106.347919,1.585)); +#161773 = VECTOR('',#161774,1.); +#161774 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#161775 = FACE_BOUND('',#161776,.F.); +#161776 = EDGE_LOOP('',(#161777,#161788,#161796,#161804,#161812,#161821) + ); +#161777 = ORIENTED_EDGE('',*,*,#161778,.T.); +#161778 = EDGE_CURVE('',#161779,#161781,#161783,.T.); +#161779 = VERTEX_POINT('',#161780); +#161780 = CARTESIAN_POINT('',(178.798792,-105.5561,1.585)); +#161781 = VERTEX_POINT('',#161782); +#161782 = CARTESIAN_POINT('',(178.665611,-105.422919,1.585)); +#161783 = CIRCLE('',#161784,0.18686440374); +#161784 = AXIS2_PLACEMENT_3D('',#161785,#161786,#161787); +#161785 = CARTESIAN_POINT('',(178.618075,-105.603636,1.585)); +#161786 = DIRECTION('',(0.,0.,1.)); +#161787 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#161788 = ORIENTED_EDGE('',*,*,#161789,.T.); +#161789 = EDGE_CURVE('',#161781,#161790,#161792,.T.); +#161790 = VERTEX_POINT('',#161791); +#161791 = CARTESIAN_POINT('',(178.377364,-105.422919,1.585)); +#161792 = LINE('',#161793,#161794); +#161793 = CARTESIAN_POINT('',(178.665611,-105.422919,1.585)); +#161794 = VECTOR('',#161795,1.); +#161795 = DIRECTION('',(-1.,0.,0.)); +#161796 = ORIENTED_EDGE('',*,*,#161797,.T.); +#161797 = EDGE_CURVE('',#161790,#161798,#161800,.T.); +#161798 = VERTEX_POINT('',#161799); +#161799 = CARTESIAN_POINT('',(178.377364,-105.796728,1.585)); +#161800 = LINE('',#161801,#161802); +#161801 = CARTESIAN_POINT('',(178.377364,-105.422919,1.585)); +#161802 = VECTOR('',#161803,1.); +#161803 = DIRECTION('',(0.,-1.,0.)); +#161804 = ORIENTED_EDGE('',*,*,#161805,.T.); +#161805 = EDGE_CURVE('',#161798,#161806,#161808,.T.); +#161806 = VERTEX_POINT('',#161807); +#161807 = CARTESIAN_POINT('',(178.665611,-105.796728,1.585)); +#161808 = LINE('',#161809,#161810); +#161809 = CARTESIAN_POINT('',(178.377364,-105.796728,1.585)); +#161810 = VECTOR('',#161811,1.); +#161811 = DIRECTION('',(1.,0.,0.)); +#161812 = ORIENTED_EDGE('',*,*,#161813,.T.); +#161813 = EDGE_CURVE('',#161806,#161814,#161816,.T.); +#161814 = VERTEX_POINT('',#161815); +#161815 = CARTESIAN_POINT('',(178.798792,-105.663547,1.585)); +#161816 = CIRCLE('',#161817,0.18686440374); +#161817 = AXIS2_PLACEMENT_3D('',#161818,#161819,#161820); +#161818 = CARTESIAN_POINT('',(178.618075,-105.616011,1.585)); +#161819 = DIRECTION('',(0.,0.,1.)); +#161820 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#161821 = ORIENTED_EDGE('',*,*,#161822,.T.); +#161822 = EDGE_CURVE('',#161814,#161779,#161823,.T.); +#161823 = LINE('',#161824,#161825); +#161824 = CARTESIAN_POINT('',(178.798792,-105.663547,1.585)); +#161825 = VECTOR('',#161826,1.); +#161826 = DIRECTION('',(0.,1.,0.)); +#161827 = PLANE('',#161828); +#161828 = AXIS2_PLACEMENT_3D('',#161829,#161830,#161831); +#161829 = CARTESIAN_POINT('',(0.,0.,1.585)); +#161830 = DIRECTION('',(0.,0.,1.)); +#161831 = DIRECTION('',(1.,0.,-0.)); +#161832 = SHELL_BASED_SURFACE_MODEL('',(#161833)); +#161833 = OPEN_SHELL('',(#161834)); +#161834 = ADVANCED_FACE('',(#161835),#162021,.T.); +#161835 = FACE_BOUND('',#161836,.F.); +#161836 = EDGE_LOOP('',(#161837,#161848,#161856,#161865,#161873,#161881, + #161890,#161898,#161907,#161915,#161923,#161931,#161940,#161948, + #161957,#161965,#161974,#161982,#161990,#161998,#162007,#162015)); +#161837 = ORIENTED_EDGE('',*,*,#161838,.T.); +#161838 = EDGE_CURVE('',#161839,#161841,#161843,.T.); +#161839 = VERTEX_POINT('',#161840); +#161840 = CARTESIAN_POINT('',(98.018685,-105.421478,1.585)); +#161841 = VERTEX_POINT('',#161842); +#161842 = CARTESIAN_POINT('',(98.033317,-105.272919,1.585)); +#161843 = CIRCLE('',#161844,7.500006711463E-02); +#161844 = AXIS2_PLACEMENT_3D('',#161845,#161846,#161847); +#161845 = CARTESIAN_POINT('',(98.033316932885,-105.3479190671,1.585)); +#161846 = DIRECTION('',(0.,0.,-1.)); +#161847 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#161848 = ORIENTED_EDGE('',*,*,#161849,.T.); +#161849 = EDGE_CURVE('',#161841,#161850,#161852,.T.); +#161850 = VERTEX_POINT('',#161851); +#161851 = CARTESIAN_POINT('',(98.660102,-105.273681,1.585)); +#161852 = LINE('',#161853,#161854); +#161853 = CARTESIAN_POINT('',(98.033317,-105.272919,1.585)); +#161854 = VECTOR('',#161855,1.); +#161855 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#161856 = ORIENTED_EDGE('',*,*,#161857,.T.); +#161857 = EDGE_CURVE('',#161850,#161858,#161860,.T.); +#161858 = VERTEX_POINT('',#161859); +#161859 = CARTESIAN_POINT('',(98.725923,-105.362551,1.585)); +#161860 = CIRCLE('',#161861,7.447391611625E-02); +#161861 = AXIS2_PLACEMENT_3D('',#161862,#161863,#161864); +#161862 = CARTESIAN_POINT('',(98.652922926644,-105.3478080874,1.585)); +#161863 = DIRECTION('',(0.,0.,-1.)); +#161864 = DIRECTION('',(9.639715124797E-02,0.995342950561,0.)); +#161865 = ORIENTED_EDGE('',*,*,#161866,.T.); +#161866 = EDGE_CURVE('',#161858,#161867,#161869,.T.); +#161867 = VERTEX_POINT('',#161868); +#161868 = CARTESIAN_POINT('',(98.708807,-105.397307,1.585)); +#161869 = LINE('',#161870,#161871); +#161870 = CARTESIAN_POINT('',(98.725923,-105.362551,1.585)); +#161871 = VECTOR('',#161872,1.); +#161872 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#161873 = ORIENTED_EDGE('',*,*,#161874,.T.); +#161874 = EDGE_CURVE('',#161867,#161875,#161877,.T.); +#161875 = VERTEX_POINT('',#161876); +#161876 = CARTESIAN_POINT('',(98.481911,-105.656616,1.585)); +#161877 = LINE('',#161878,#161879); +#161878 = CARTESIAN_POINT('',(98.708807,-105.397307,1.585)); +#161879 = VECTOR('',#161880,1.); +#161880 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#161881 = ORIENTED_EDGE('',*,*,#161882,.T.); +#161882 = EDGE_CURVE('',#161875,#161883,#161885,.T.); +#161883 = VERTEX_POINT('',#161884); +#161884 = CARTESIAN_POINT('',(98.725923,-105.904715,1.585)); +#161885 = CIRCLE('',#161886,0.348520834816); +#161886 = AXIS2_PLACEMENT_3D('',#161887,#161888,#161889); +#161887 = CARTESIAN_POINT('',(98.3886176174,-105.9924181993,1.585)); +#161888 = DIRECTION('',(0.,0.,-1.)); +#161889 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#161890 = ORIENTED_EDGE('',*,*,#161891,.T.); +#161891 = EDGE_CURVE('',#161883,#161892,#161894,.T.); +#161892 = VERTEX_POINT('',#161893); +#161893 = CARTESIAN_POINT('',(98.724701,-106.177252,1.585)); +#161894 = LINE('',#161895,#161896); +#161895 = CARTESIAN_POINT('',(98.725923,-105.904715,1.585)); +#161896 = VECTOR('',#161897,1.); +#161897 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#161898 = ORIENTED_EDGE('',*,*,#161899,.T.); +#161899 = EDGE_CURVE('',#161892,#161900,#161902,.T.); +#161900 = VERTEX_POINT('',#161901); +#161901 = CARTESIAN_POINT('',(98.47652,-106.421478,1.585)); +#161902 = CIRCLE('',#161903,0.348635327447); +#161903 = AXIS2_PLACEMENT_3D('',#161904,#161905,#161906); +#161904 = CARTESIAN_POINT('',(98.388748481291,-106.0840720841,1.585)); +#161905 = DIRECTION('',(0.,0.,-1.)); +#161906 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#161907 = ORIENTED_EDGE('',*,*,#161908,.T.); +#161908 = EDGE_CURVE('',#161900,#161909,#161911,.T.); +#161909 = VERTEX_POINT('',#161910); +#161910 = CARTESIAN_POINT('',(98.156364,-106.420256,1.585)); +#161911 = LINE('',#161912,#161913); +#161912 = CARTESIAN_POINT('',(98.47652,-106.421478,1.585)); +#161913 = VECTOR('',#161914,1.); +#161914 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#161915 = ORIENTED_EDGE('',*,*,#161916,.T.); +#161916 = EDGE_CURVE('',#161909,#161917,#161919,.T.); +#161917 = VERTEX_POINT('',#161918); +#161918 = CARTESIAN_POINT('',(98.033651,-106.35805,1.585)); +#161919 = LINE('',#161920,#161921); +#161920 = CARTESIAN_POINT('',(98.156364,-106.420256,1.585)); +#161921 = VECTOR('',#161922,1.); +#161922 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#161923 = ORIENTED_EDGE('',*,*,#161924,.T.); +#161924 = EDGE_CURVE('',#161917,#161925,#161927,.T.); +#161925 = VERTEX_POINT('',#161926); +#161926 = CARTESIAN_POINT('',(97.970956,-106.294347,1.585)); +#161927 = LINE('',#161928,#161929); +#161928 = CARTESIAN_POINT('',(98.033651,-106.35805,1.585)); +#161929 = VECTOR('',#161930,1.); +#161930 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#161931 = ORIENTED_EDGE('',*,*,#161932,.T.); +#161932 = EDGE_CURVE('',#161925,#161933,#161935,.T.); +#161933 = VERTEX_POINT('',#161934); +#161934 = CARTESIAN_POINT('',(98.086351,-106.199648,1.585)); +#161935 = CIRCLE('',#161936,7.500012668039E-02); +#161936 = AXIS2_PLACEMENT_3D('',#161937,#161938,#161939); +#161937 = CARTESIAN_POINT('',(98.033317051994,-106.2526802483,1.585)); +#161938 = DIRECTION('',(0.,0.,-1.)); +#161939 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#161940 = ORIENTED_EDGE('',*,*,#161941,.T.); +#161941 = EDGE_CURVE('',#161933,#161942,#161944,.T.); +#161942 = VERTEX_POINT('',#161943); +#161943 = CARTESIAN_POINT('',(98.125363,-106.238661,1.585)); +#161944 = LINE('',#161945,#161946); +#161945 = CARTESIAN_POINT('',(98.086351,-106.199648,1.585)); +#161946 = VECTOR('',#161947,1.); +#161947 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#161948 = ORIENTED_EDGE('',*,*,#161949,.T.); +#161949 = EDGE_CURVE('',#161942,#161950,#161952,.T.); +#161950 = VERTEX_POINT('',#161951); +#161951 = CARTESIAN_POINT('',(98.512698,-106.238661,1.585)); +#161952 = CIRCLE('',#161953,0.358502380266); +#161953 = AXIS2_PLACEMENT_3D('',#161954,#161955,#161956); +#161954 = CARTESIAN_POINT('',(98.3190305,-105.936971,1.585)); +#161955 = DIRECTION('',(0.,0.,1.)); +#161956 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#161957 = ORIENTED_EDGE('',*,*,#161958,.T.); +#161958 = EDGE_CURVE('',#161950,#161959,#161961,.T.); +#161959 = VERTEX_POINT('',#161960); +#161960 = CARTESIAN_POINT('',(98.543105,-106.208253,1.585)); +#161961 = LINE('',#161962,#161963); +#161962 = CARTESIAN_POINT('',(98.512698,-106.238661,1.585)); +#161963 = VECTOR('',#161964,1.); +#161964 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#161965 = ORIENTED_EDGE('',*,*,#161966,.T.); +#161966 = EDGE_CURVE('',#161959,#161967,#161969,.T.); +#161967 = VERTEX_POINT('',#161968); +#161968 = CARTESIAN_POINT('',(98.543106,-105.868536,1.585)); +#161969 = CIRCLE('',#161970,0.305616146029); +#161970 = AXIS2_PLACEMENT_3D('',#161971,#161972,#161973); +#161971 = CARTESIAN_POINT('',(98.289039920493,-106.0383937521,1.585)); +#161972 = DIRECTION('',(0.,-0.,1.)); +#161973 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#161974 = ORIENTED_EDGE('',*,*,#161975,.T.); +#161975 = EDGE_CURVE('',#161967,#161976,#161978,.T.); +#161976 = VERTEX_POINT('',#161977); +#161977 = CARTESIAN_POINT('',(98.512699,-105.838129,1.585)); +#161978 = LINE('',#161979,#161980); +#161979 = CARTESIAN_POINT('',(98.543106,-105.868536,1.585)); +#161980 = VECTOR('',#161981,1.); +#161981 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#161982 = ORIENTED_EDGE('',*,*,#161983,.T.); +#161983 = EDGE_CURVE('',#161976,#161984,#161986,.T.); +#161984 = VERTEX_POINT('',#161985); +#161985 = CARTESIAN_POINT('',(98.444183,-105.803871,1.585)); +#161986 = LINE('',#161987,#161988); +#161987 = CARTESIAN_POINT('',(98.512699,-105.838129,1.585)); +#161988 = VECTOR('',#161989,1.); +#161989 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#161990 = ORIENTED_EDGE('',*,*,#161991,.T.); +#161991 = EDGE_CURVE('',#161984,#161992,#161994,.T.); +#161992 = VERTEX_POINT('',#161993); +#161993 = CARTESIAN_POINT('',(98.304399,-105.80243,1.585)); +#161994 = LINE('',#161995,#161996); +#161995 = CARTESIAN_POINT('',(98.444183,-105.803871,1.585)); +#161996 = VECTOR('',#161997,1.); +#161997 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#161998 = ORIENTED_EDGE('',*,*,#161999,.T.); +#161999 = EDGE_CURVE('',#161992,#162000,#162002,.T.); +#162000 = VERTEX_POINT('',#162001); +#162001 = CARTESIAN_POINT('',(98.262588,-105.679483,1.585)); +#162002 = CIRCLE('',#162003,7.500015628755E-02); +#162003 = AXIS2_PLACEMENT_3D('',#162004,#162005,#162006); +#162004 = CARTESIAN_POINT('',(98.319031284325,-105.7288710461,1.585)); +#162005 = DIRECTION('',(0.,0.,-1.)); +#162006 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#162007 = ORIENTED_EDGE('',*,*,#162008,.T.); +#162008 = EDGE_CURVE('',#162000,#162009,#162011,.T.); +#162009 = VERTEX_POINT('',#162010); +#162010 = CARTESIAN_POINT('',(98.487082,-105.422919,1.585)); +#162011 = LINE('',#162012,#162013); +#162012 = CARTESIAN_POINT('',(98.262588,-105.679483,1.585)); +#162013 = VECTOR('',#162014,1.); +#162014 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#162015 = ORIENTED_EDGE('',*,*,#162016,.T.); +#162016 = EDGE_CURVE('',#162009,#161839,#162017,.T.); +#162017 = LINE('',#162018,#162019); +#162018 = CARTESIAN_POINT('',(98.487082,-105.422919,1.585)); +#162019 = VECTOR('',#162020,1.); +#162020 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#162021 = PLANE('',#162022); +#162022 = AXIS2_PLACEMENT_3D('',#162023,#162024,#162025); +#162023 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162024 = DIRECTION('',(0.,0.,1.)); +#162025 = DIRECTION('',(1.,0.,-0.)); +#162026 = SHELL_BASED_SURFACE_MODEL('',(#162027)); +#162027 = OPEN_SHELL('',(#162028)); +#162028 = ADVANCED_FACE('',(#162029),#162224,.T.); +#162029 = FACE_BOUND('',#162030,.F.); +#162030 = EDGE_LOOP('',(#162031,#162042,#162050,#162059,#162067,#162075, + #162083,#162091,#162100,#162108,#162117,#162125,#162133,#162141, + #162150,#162158,#162167,#162175,#162184,#162192,#162201,#162209, + #162218)); +#162031 = ORIENTED_EDGE('',*,*,#162032,.T.); +#162032 = EDGE_CURVE('',#162033,#162035,#162037,.T.); +#162033 = VERTEX_POINT('',#162034); +#162034 = CARTESIAN_POINT('',(101.580626,-105.32604,1.585)); +#162035 = VERTEX_POINT('',#162036); +#162036 = CARTESIAN_POINT('',(101.652364,-105.272919,1.585)); +#162037 = CIRCLE('',#162038,7.50033610077E-02); +#162038 = AXIS2_PLACEMENT_3D('',#162039,#162040,#162041); +#162039 = CARTESIAN_POINT('',(101.6523662707,-105.3479223609,1.585)); +#162040 = DIRECTION('',(0.,0.,-1.)); +#162041 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#162042 = ORIENTED_EDGE('',*,*,#162043,.T.); +#162043 = EDGE_CURVE('',#162035,#162044,#162046,.T.); +#162044 = VERTEX_POINT('',#162045); +#162045 = CARTESIAN_POINT('',(102.143186,-105.27436,1.585)); +#162046 = LINE('',#162047,#162048); +#162047 = CARTESIAN_POINT('',(101.652364,-105.272919,1.585)); +#162048 = VECTOR('',#162049,1.); +#162049 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#162050 = ORIENTED_EDGE('',*,*,#162051,.T.); +#162051 = EDGE_CURVE('',#162044,#162052,#162054,.T.); +#162052 = VERTEX_POINT('',#162053); +#162053 = CARTESIAN_POINT('',(102.128554,-105.422919,1.585)); +#162054 = CIRCLE('',#162055,7.500006711464E-02); +#162055 = AXIS2_PLACEMENT_3D('',#162056,#162057,#162058); +#162056 = CARTESIAN_POINT('',(102.12855406711,-105.3479189328,1.585)); +#162057 = DIRECTION('',(0.,0.,-1.)); +#162058 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162059 = ORIENTED_EDGE('',*,*,#162060,.T.); +#162060 = EDGE_CURVE('',#162052,#162061,#162063,.T.); +#162061 = VERTEX_POINT('',#162062); +#162062 = CARTESIAN_POINT('',(101.720238,-105.422919,1.585)); +#162063 = LINE('',#162064,#162065); +#162064 = CARTESIAN_POINT('',(102.128554,-105.422919,1.585)); +#162065 = VECTOR('',#162066,1.); +#162066 = DIRECTION('',(-1.,0.,0.)); +#162067 = ORIENTED_EDGE('',*,*,#162068,.T.); +#162068 = EDGE_CURVE('',#162061,#162069,#162071,.T.); +#162069 = VERTEX_POINT('',#162070); +#162070 = CARTESIAN_POINT('',(101.695419,-105.671109,1.585)); +#162071 = LINE('',#162072,#162073); +#162072 = CARTESIAN_POINT('',(101.720238,-105.422919,1.585)); +#162073 = VECTOR('',#162074,1.); +#162074 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#162075 = ORIENTED_EDGE('',*,*,#162076,.T.); +#162076 = EDGE_CURVE('',#162069,#162077,#162079,.T.); +#162077 = VERTEX_POINT('',#162078); +#162078 = CARTESIAN_POINT('',(101.73297,-105.655312,1.585)); +#162079 = LINE('',#162080,#162081); +#162080 = CARTESIAN_POINT('',(101.695419,-105.671109,1.585)); +#162081 = VECTOR('',#162082,1.); +#162082 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#162083 = ORIENTED_EDGE('',*,*,#162084,.T.); +#162084 = EDGE_CURVE('',#162077,#162085,#162087,.T.); +#162085 = VERTEX_POINT('',#162086); +#162086 = CARTESIAN_POINT('',(102.005506,-105.656534,1.585)); +#162087 = LINE('',#162088,#162089); +#162088 = CARTESIAN_POINT('',(101.73297,-105.655312,1.585)); +#162089 = VECTOR('',#162090,1.); +#162090 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#162091 = ORIENTED_EDGE('',*,*,#162092,.T.); +#162092 = EDGE_CURVE('',#162085,#162093,#162095,.T.); +#162093 = VERTEX_POINT('',#162094); +#162094 = CARTESIAN_POINT('',(102.249732,-105.904715,1.585)); +#162095 = CIRCLE('',#162096,0.348625649748); +#162096 = AXIS2_PLACEMENT_3D('',#162097,#162098,#162099); +#162097 = CARTESIAN_POINT('',(101.91233404586,-105.9924786838,1.585)); +#162098 = DIRECTION('',(0.,0.,-1.)); +#162099 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162100 = ORIENTED_EDGE('',*,*,#162101,.T.); +#162101 = EDGE_CURVE('',#162093,#162102,#162104,.T.); +#162102 = VERTEX_POINT('',#162103); +#162103 = CARTESIAN_POINT('',(102.24851,-106.177252,1.585)); +#162104 = LINE('',#162105,#162106); +#162105 = CARTESIAN_POINT('',(102.249732,-105.904715,1.585)); +#162106 = VECTOR('',#162107,1.); +#162107 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162108 = ORIENTED_EDGE('',*,*,#162109,.T.); +#162109 = EDGE_CURVE('',#162102,#162110,#162112,.T.); +#162110 = VERTEX_POINT('',#162111); +#162111 = CARTESIAN_POINT('',(102.000329,-106.421478,1.585)); +#162112 = CIRCLE('',#162113,0.348635327447); +#162113 = AXIS2_PLACEMENT_3D('',#162114,#162115,#162116); +#162114 = CARTESIAN_POINT('',(101.91255748129,-106.0840720841,1.585)); +#162115 = DIRECTION('',(0.,0.,-1.)); +#162116 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162117 = ORIENTED_EDGE('',*,*,#162118,.T.); +#162118 = EDGE_CURVE('',#162110,#162119,#162121,.T.); +#162119 = VERTEX_POINT('',#162120); +#162120 = CARTESIAN_POINT('',(101.727792,-106.420256,1.585)); +#162121 = LINE('',#162122,#162123); +#162122 = CARTESIAN_POINT('',(102.000329,-106.421478,1.585)); +#162123 = VECTOR('',#162124,1.); +#162124 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#162125 = ORIENTED_EDGE('',*,*,#162126,.T.); +#162126 = EDGE_CURVE('',#162119,#162127,#162129,.T.); +#162127 = VERTEX_POINT('',#162128); +#162128 = CARTESIAN_POINT('',(101.605079,-106.35805,1.585)); +#162129 = LINE('',#162130,#162131); +#162130 = CARTESIAN_POINT('',(101.727792,-106.420256,1.585)); +#162131 = VECTOR('',#162132,1.); +#162132 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#162133 = ORIENTED_EDGE('',*,*,#162134,.T.); +#162134 = EDGE_CURVE('',#162127,#162135,#162137,.T.); +#162135 = VERTEX_POINT('',#162136); +#162136 = CARTESIAN_POINT('',(101.542384,-106.294347,1.585)); +#162137 = LINE('',#162138,#162139); +#162138 = CARTESIAN_POINT('',(101.605079,-106.35805,1.585)); +#162139 = VECTOR('',#162140,1.); +#162140 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#162141 = ORIENTED_EDGE('',*,*,#162142,.T.); +#162142 = EDGE_CURVE('',#162135,#162143,#162145,.T.); +#162143 = VERTEX_POINT('',#162144); +#162144 = CARTESIAN_POINT('',(101.657779,-106.199648,1.585)); +#162145 = CIRCLE('',#162146,7.50001266804E-02); +#162146 = AXIS2_PLACEMENT_3D('',#162147,#162148,#162149); +#162147 = CARTESIAN_POINT('',(101.60474505199,-106.2526802483,1.585)); +#162148 = DIRECTION('',(0.,0.,-1.)); +#162149 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#162150 = ORIENTED_EDGE('',*,*,#162151,.T.); +#162151 = EDGE_CURVE('',#162143,#162152,#162154,.T.); +#162152 = VERTEX_POINT('',#162153); +#162153 = CARTESIAN_POINT('',(101.696791,-106.238661,1.585)); +#162154 = LINE('',#162155,#162156); +#162155 = CARTESIAN_POINT('',(101.657779,-106.199648,1.585)); +#162156 = VECTOR('',#162157,1.); +#162157 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#162158 = ORIENTED_EDGE('',*,*,#162159,.T.); +#162159 = EDGE_CURVE('',#162152,#162160,#162162,.T.); +#162160 = VERTEX_POINT('',#162161); +#162161 = CARTESIAN_POINT('',(102.036507,-106.238661,1.585)); +#162162 = CIRCLE('',#162163,0.305620374329); +#162163 = AXIS2_PLACEMENT_3D('',#162164,#162165,#162166); +#162164 = CARTESIAN_POINT('',(101.866649,-105.98459,1.585)); +#162165 = DIRECTION('',(0.,0.,1.)); +#162166 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#162167 = ORIENTED_EDGE('',*,*,#162168,.T.); +#162168 = EDGE_CURVE('',#162160,#162169,#162171,.T.); +#162169 = VERTEX_POINT('',#162170); +#162170 = CARTESIAN_POINT('',(102.066914,-106.208253,1.585)); +#162171 = LINE('',#162172,#162173); +#162172 = CARTESIAN_POINT('',(102.036507,-106.238661,1.585)); +#162173 = VECTOR('',#162174,1.); +#162174 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162175 = ORIENTED_EDGE('',*,*,#162176,.T.); +#162176 = EDGE_CURVE('',#162169,#162177,#162179,.T.); +#162177 = VERTEX_POINT('',#162178); +#162178 = CARTESIAN_POINT('',(102.066915,-105.868536,1.585)); +#162179 = CIRCLE('',#162180,0.305616146029); +#162180 = AXIS2_PLACEMENT_3D('',#162181,#162182,#162183); +#162181 = CARTESIAN_POINT('',(101.81284892049,-106.0383937521,1.585)); +#162182 = DIRECTION('',(0.,-0.,1.)); +#162183 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162184 = ORIENTED_EDGE('',*,*,#162185,.T.); +#162185 = EDGE_CURVE('',#162177,#162186,#162188,.T.); +#162186 = VERTEX_POINT('',#162187); +#162187 = CARTESIAN_POINT('',(102.036508,-105.838129,1.585)); +#162188 = LINE('',#162189,#162190); +#162189 = CARTESIAN_POINT('',(102.066915,-105.868536,1.585)); +#162190 = VECTOR('',#162191,1.); +#162191 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162192 = ORIENTED_EDGE('',*,*,#162193,.T.); +#162193 = EDGE_CURVE('',#162186,#162194,#162196,.T.); +#162194 = VERTEX_POINT('',#162195); +#162195 = CARTESIAN_POINT('',(101.696791,-105.838129,1.585)); +#162196 = CIRCLE('',#162197,0.305621483548); +#162197 = AXIS2_PLACEMENT_3D('',#162198,#162199,#162200); +#162198 = CARTESIAN_POINT('',(101.8666495,-106.092201,1.585)); +#162199 = DIRECTION('',(0.,0.,1.)); +#162200 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#162201 = ORIENTED_EDGE('',*,*,#162202,.T.); +#162202 = EDGE_CURVE('',#162194,#162203,#162205,.T.); +#162203 = VERTEX_POINT('',#162204); +#162204 = CARTESIAN_POINT('',(101.640001,-105.890306,1.585)); +#162205 = LINE('',#162206,#162207); +#162206 = CARTESIAN_POINT('',(101.696791,-105.838129,1.585)); +#162207 = VECTOR('',#162208,1.); +#162208 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#162209 = ORIENTED_EDGE('',*,*,#162210,.T.); +#162210 = EDGE_CURVE('',#162203,#162211,#162213,.T.); +#162211 = VERTEX_POINT('',#162212); +#162212 = CARTESIAN_POINT('',(101.530095,-105.831349,1.585)); +#162213 = CIRCLE('',#162214,7.500024172471E-02); +#162214 = AXIS2_PLACEMENT_3D('',#162215,#162216,#162217); +#162215 = CARTESIAN_POINT('',(101.60474497002,-105.8241089561,1.585)); +#162216 = DIRECTION('',(-0.,0.,-1.)); +#162217 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#162218 = ORIENTED_EDGE('',*,*,#162219,.T.); +#162219 = EDGE_CURVE('',#162211,#162033,#162220,.T.); +#162220 = LINE('',#162221,#162222); +#162221 = CARTESIAN_POINT('',(101.530095,-105.831349,1.585)); +#162222 = VECTOR('',#162223,1.); +#162223 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#162224 = PLANE('',#162225); +#162225 = AXIS2_PLACEMENT_3D('',#162226,#162227,#162228); +#162226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162227 = DIRECTION('',(0.,0.,1.)); +#162228 = DIRECTION('',(1.,0.,-0.)); +#162229 = SHELL_BASED_SURFACE_MODEL('',(#162230)); +#162230 = OPEN_SHELL('',(#162231)); +#162231 = ADVANCED_FACE('',(#162232),#162427,.T.); +#162232 = FACE_BOUND('',#162233,.F.); +#162233 = EDGE_LOOP('',(#162234,#162245,#162253,#162262,#162270,#162278, + #162286,#162294,#162303,#162311,#162320,#162328,#162336,#162344, + #162353,#162361,#162370,#162378,#162387,#162395,#162404,#162412, + #162421)); +#162234 = ORIENTED_EDGE('',*,*,#162235,.T.); +#162235 = EDGE_CURVE('',#162236,#162238,#162240,.T.); +#162236 = VERTEX_POINT('',#162237); +#162237 = CARTESIAN_POINT('',(102.533007,-105.32604,1.585)); +#162238 = VERTEX_POINT('',#162239); +#162239 = CARTESIAN_POINT('',(102.604745,-105.272919,1.585)); +#162240 = CIRCLE('',#162241,7.50033610077E-02); +#162241 = AXIS2_PLACEMENT_3D('',#162242,#162243,#162244); +#162242 = CARTESIAN_POINT('',(102.6047472707,-105.3479223609,1.585)); +#162243 = DIRECTION('',(0.,0.,-1.)); +#162244 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#162245 = ORIENTED_EDGE('',*,*,#162246,.T.); +#162246 = EDGE_CURVE('',#162238,#162247,#162249,.T.); +#162247 = VERTEX_POINT('',#162248); +#162248 = CARTESIAN_POINT('',(103.095567,-105.27436,1.585)); +#162249 = LINE('',#162250,#162251); +#162250 = CARTESIAN_POINT('',(102.604745,-105.272919,1.585)); +#162251 = VECTOR('',#162252,1.); +#162252 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#162253 = ORIENTED_EDGE('',*,*,#162254,.T.); +#162254 = EDGE_CURVE('',#162247,#162255,#162257,.T.); +#162255 = VERTEX_POINT('',#162256); +#162256 = CARTESIAN_POINT('',(103.080935,-105.422919,1.585)); +#162257 = CIRCLE('',#162258,7.500006711464E-02); +#162258 = AXIS2_PLACEMENT_3D('',#162259,#162260,#162261); +#162259 = CARTESIAN_POINT('',(103.08093506711,-105.3479189328,1.585)); +#162260 = DIRECTION('',(0.,0.,-1.)); +#162261 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162262 = ORIENTED_EDGE('',*,*,#162263,.T.); +#162263 = EDGE_CURVE('',#162255,#162264,#162266,.T.); +#162264 = VERTEX_POINT('',#162265); +#162265 = CARTESIAN_POINT('',(102.672619,-105.422919,1.585)); +#162266 = LINE('',#162267,#162268); +#162267 = CARTESIAN_POINT('',(103.080935,-105.422919,1.585)); +#162268 = VECTOR('',#162269,1.); +#162269 = DIRECTION('',(-1.,0.,0.)); +#162270 = ORIENTED_EDGE('',*,*,#162271,.T.); +#162271 = EDGE_CURVE('',#162264,#162272,#162274,.T.); +#162272 = VERTEX_POINT('',#162273); +#162273 = CARTESIAN_POINT('',(102.6478,-105.671109,1.585)); +#162274 = LINE('',#162275,#162276); +#162275 = CARTESIAN_POINT('',(102.672619,-105.422919,1.585)); +#162276 = VECTOR('',#162277,1.); +#162277 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#162278 = ORIENTED_EDGE('',*,*,#162279,.T.); +#162279 = EDGE_CURVE('',#162272,#162280,#162282,.T.); +#162280 = VERTEX_POINT('',#162281); +#162281 = CARTESIAN_POINT('',(102.685351,-105.655312,1.585)); +#162282 = LINE('',#162283,#162284); +#162283 = CARTESIAN_POINT('',(102.6478,-105.671109,1.585)); +#162284 = VECTOR('',#162285,1.); +#162285 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#162286 = ORIENTED_EDGE('',*,*,#162287,.T.); +#162287 = EDGE_CURVE('',#162280,#162288,#162290,.T.); +#162288 = VERTEX_POINT('',#162289); +#162289 = CARTESIAN_POINT('',(102.957887,-105.656534,1.585)); +#162290 = LINE('',#162291,#162292); +#162291 = CARTESIAN_POINT('',(102.685351,-105.655312,1.585)); +#162292 = VECTOR('',#162293,1.); +#162293 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#162294 = ORIENTED_EDGE('',*,*,#162295,.T.); +#162295 = EDGE_CURVE('',#162288,#162296,#162298,.T.); +#162296 = VERTEX_POINT('',#162297); +#162297 = CARTESIAN_POINT('',(103.202113,-105.904715,1.585)); +#162298 = CIRCLE('',#162299,0.348625649748); +#162299 = AXIS2_PLACEMENT_3D('',#162300,#162301,#162302); +#162300 = CARTESIAN_POINT('',(102.86471504586,-105.9924786838,1.585)); +#162301 = DIRECTION('',(0.,0.,-1.)); +#162302 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162303 = ORIENTED_EDGE('',*,*,#162304,.T.); +#162304 = EDGE_CURVE('',#162296,#162305,#162307,.T.); +#162305 = VERTEX_POINT('',#162306); +#162306 = CARTESIAN_POINT('',(103.200891,-106.177252,1.585)); +#162307 = LINE('',#162308,#162309); +#162308 = CARTESIAN_POINT('',(103.202113,-105.904715,1.585)); +#162309 = VECTOR('',#162310,1.); +#162310 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162311 = ORIENTED_EDGE('',*,*,#162312,.T.); +#162312 = EDGE_CURVE('',#162305,#162313,#162315,.T.); +#162313 = VERTEX_POINT('',#162314); +#162314 = CARTESIAN_POINT('',(102.95271,-106.421478,1.585)); +#162315 = CIRCLE('',#162316,0.348635327447); +#162316 = AXIS2_PLACEMENT_3D('',#162317,#162318,#162319); +#162317 = CARTESIAN_POINT('',(102.86493848129,-106.0840720841,1.585)); +#162318 = DIRECTION('',(0.,0.,-1.)); +#162319 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162320 = ORIENTED_EDGE('',*,*,#162321,.T.); +#162321 = EDGE_CURVE('',#162313,#162322,#162324,.T.); +#162322 = VERTEX_POINT('',#162323); +#162323 = CARTESIAN_POINT('',(102.680173,-106.420256,1.585)); +#162324 = LINE('',#162325,#162326); +#162325 = CARTESIAN_POINT('',(102.95271,-106.421478,1.585)); +#162326 = VECTOR('',#162327,1.); +#162327 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#162328 = ORIENTED_EDGE('',*,*,#162329,.T.); +#162329 = EDGE_CURVE('',#162322,#162330,#162332,.T.); +#162330 = VERTEX_POINT('',#162331); +#162331 = CARTESIAN_POINT('',(102.55746,-106.35805,1.585)); +#162332 = LINE('',#162333,#162334); +#162333 = CARTESIAN_POINT('',(102.680173,-106.420256,1.585)); +#162334 = VECTOR('',#162335,1.); +#162335 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#162336 = ORIENTED_EDGE('',*,*,#162337,.T.); +#162337 = EDGE_CURVE('',#162330,#162338,#162340,.T.); +#162338 = VERTEX_POINT('',#162339); +#162339 = CARTESIAN_POINT('',(102.494765,-106.294347,1.585)); +#162340 = LINE('',#162341,#162342); +#162341 = CARTESIAN_POINT('',(102.55746,-106.35805,1.585)); +#162342 = VECTOR('',#162343,1.); +#162343 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#162344 = ORIENTED_EDGE('',*,*,#162345,.T.); +#162345 = EDGE_CURVE('',#162338,#162346,#162348,.T.); +#162346 = VERTEX_POINT('',#162347); +#162347 = CARTESIAN_POINT('',(102.61016,-106.199648,1.585)); +#162348 = CIRCLE('',#162349,7.500012668039E-02); +#162349 = AXIS2_PLACEMENT_3D('',#162350,#162351,#162352); +#162350 = CARTESIAN_POINT('',(102.55712605199,-106.2526802483,1.585)); +#162351 = DIRECTION('',(0.,0.,-1.)); +#162352 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#162353 = ORIENTED_EDGE('',*,*,#162354,.T.); +#162354 = EDGE_CURVE('',#162346,#162355,#162357,.T.); +#162355 = VERTEX_POINT('',#162356); +#162356 = CARTESIAN_POINT('',(102.649172,-106.238661,1.585)); +#162357 = LINE('',#162358,#162359); +#162358 = CARTESIAN_POINT('',(102.61016,-106.199648,1.585)); +#162359 = VECTOR('',#162360,1.); +#162360 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#162361 = ORIENTED_EDGE('',*,*,#162362,.T.); +#162362 = EDGE_CURVE('',#162355,#162363,#162365,.T.); +#162363 = VERTEX_POINT('',#162364); +#162364 = CARTESIAN_POINT('',(102.988888,-106.238661,1.585)); +#162365 = CIRCLE('',#162366,0.305620374329); +#162366 = AXIS2_PLACEMENT_3D('',#162367,#162368,#162369); +#162367 = CARTESIAN_POINT('',(102.81903,-105.98459,1.585)); +#162368 = DIRECTION('',(0.,0.,1.)); +#162369 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#162370 = ORIENTED_EDGE('',*,*,#162371,.T.); +#162371 = EDGE_CURVE('',#162363,#162372,#162374,.T.); +#162372 = VERTEX_POINT('',#162373); +#162373 = CARTESIAN_POINT('',(103.019295,-106.208253,1.585)); +#162374 = LINE('',#162375,#162376); +#162375 = CARTESIAN_POINT('',(102.988888,-106.238661,1.585)); +#162376 = VECTOR('',#162377,1.); +#162377 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162378 = ORIENTED_EDGE('',*,*,#162379,.T.); +#162379 = EDGE_CURVE('',#162372,#162380,#162382,.T.); +#162380 = VERTEX_POINT('',#162381); +#162381 = CARTESIAN_POINT('',(103.019296,-105.868536,1.585)); +#162382 = CIRCLE('',#162383,0.305616146029); +#162383 = AXIS2_PLACEMENT_3D('',#162384,#162385,#162386); +#162384 = CARTESIAN_POINT('',(102.76522992049,-106.0383937521,1.585)); +#162385 = DIRECTION('',(0.,-0.,1.)); +#162386 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162387 = ORIENTED_EDGE('',*,*,#162388,.T.); +#162388 = EDGE_CURVE('',#162380,#162389,#162391,.T.); +#162389 = VERTEX_POINT('',#162390); +#162390 = CARTESIAN_POINT('',(102.988889,-105.838129,1.585)); +#162391 = LINE('',#162392,#162393); +#162392 = CARTESIAN_POINT('',(103.019296,-105.868536,1.585)); +#162393 = VECTOR('',#162394,1.); +#162394 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162395 = ORIENTED_EDGE('',*,*,#162396,.T.); +#162396 = EDGE_CURVE('',#162389,#162397,#162399,.T.); +#162397 = VERTEX_POINT('',#162398); +#162398 = CARTESIAN_POINT('',(102.649172,-105.838129,1.585)); +#162399 = CIRCLE('',#162400,0.305621483548); +#162400 = AXIS2_PLACEMENT_3D('',#162401,#162402,#162403); +#162401 = CARTESIAN_POINT('',(102.8190305,-106.092201,1.585)); +#162402 = DIRECTION('',(0.,0.,1.)); +#162403 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#162404 = ORIENTED_EDGE('',*,*,#162405,.T.); +#162405 = EDGE_CURVE('',#162397,#162406,#162408,.T.); +#162406 = VERTEX_POINT('',#162407); +#162407 = CARTESIAN_POINT('',(102.592382,-105.890306,1.585)); +#162408 = LINE('',#162409,#162410); +#162409 = CARTESIAN_POINT('',(102.649172,-105.838129,1.585)); +#162410 = VECTOR('',#162411,1.); +#162411 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#162412 = ORIENTED_EDGE('',*,*,#162413,.T.); +#162413 = EDGE_CURVE('',#162406,#162414,#162416,.T.); +#162414 = VERTEX_POINT('',#162415); +#162415 = CARTESIAN_POINT('',(102.482476,-105.831349,1.585)); +#162416 = CIRCLE('',#162417,7.500024172471E-02); +#162417 = AXIS2_PLACEMENT_3D('',#162418,#162419,#162420); +#162418 = CARTESIAN_POINT('',(102.55712597002,-105.8241089561,1.585)); +#162419 = DIRECTION('',(-0.,0.,-1.)); +#162420 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#162421 = ORIENTED_EDGE('',*,*,#162422,.T.); +#162422 = EDGE_CURVE('',#162414,#162236,#162423,.T.); +#162423 = LINE('',#162424,#162425); +#162424 = CARTESIAN_POINT('',(102.482476,-105.831349,1.585)); +#162425 = VECTOR('',#162426,1.); +#162426 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#162427 = PLANE('',#162428); +#162428 = AXIS2_PLACEMENT_3D('',#162429,#162430,#162431); +#162429 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162430 = DIRECTION('',(0.,0.,1.)); +#162431 = DIRECTION('',(1.,0.,-0.)); +#162432 = SHELL_BASED_SURFACE_MODEL('',(#162433)); +#162433 = OPEN_SHELL('',(#162434)); +#162434 = ADVANCED_FACE('',(#162435),#162655,.T.); +#162435 = FACE_BOUND('',#162436,.F.); +#162436 = EDGE_LOOP('',(#162437,#162448,#162456,#162465,#162473,#162481, + #162489,#162497,#162506,#162514,#162523,#162531,#162539,#162547, + #162556,#162564,#162572,#162581,#162589,#162598,#162606,#162615, + #162623,#162632,#162640,#162649)); +#162437 = ORIENTED_EDGE('',*,*,#162438,.T.); +#162438 = EDGE_CURVE('',#162439,#162441,#162443,.T.); +#162439 = VERTEX_POINT('',#162440); +#162440 = CARTESIAN_POINT('',(105.580626,-105.32604,1.585)); +#162441 = VERTEX_POINT('',#162442); +#162442 = CARTESIAN_POINT('',(105.652364,-105.272919,1.585)); +#162443 = CIRCLE('',#162444,7.50033610077E-02); +#162444 = AXIS2_PLACEMENT_3D('',#162445,#162446,#162447); +#162445 = CARTESIAN_POINT('',(105.6523662707,-105.3479223609,1.585)); +#162446 = DIRECTION('',(0.,0.,-1.)); +#162447 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#162448 = ORIENTED_EDGE('',*,*,#162449,.T.); +#162449 = EDGE_CURVE('',#162441,#162450,#162452,.T.); +#162450 = VERTEX_POINT('',#162451); +#162451 = CARTESIAN_POINT('',(106.143186,-105.27436,1.585)); +#162452 = LINE('',#162453,#162454); +#162453 = CARTESIAN_POINT('',(105.652364,-105.272919,1.585)); +#162454 = VECTOR('',#162455,1.); +#162455 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#162456 = ORIENTED_EDGE('',*,*,#162457,.T.); +#162457 = EDGE_CURVE('',#162450,#162458,#162460,.T.); +#162458 = VERTEX_POINT('',#162459); +#162459 = CARTESIAN_POINT('',(106.128554,-105.422919,1.585)); +#162460 = CIRCLE('',#162461,7.500006711464E-02); +#162461 = AXIS2_PLACEMENT_3D('',#162462,#162463,#162464); +#162462 = CARTESIAN_POINT('',(106.12855406711,-105.3479189328,1.585)); +#162463 = DIRECTION('',(0.,0.,-1.)); +#162464 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162465 = ORIENTED_EDGE('',*,*,#162466,.T.); +#162466 = EDGE_CURVE('',#162458,#162467,#162469,.T.); +#162467 = VERTEX_POINT('',#162468); +#162468 = CARTESIAN_POINT('',(105.720238,-105.422919,1.585)); +#162469 = LINE('',#162470,#162471); +#162470 = CARTESIAN_POINT('',(106.128554,-105.422919,1.585)); +#162471 = VECTOR('',#162472,1.); +#162472 = DIRECTION('',(-1.,0.,0.)); +#162473 = ORIENTED_EDGE('',*,*,#162474,.T.); +#162474 = EDGE_CURVE('',#162467,#162475,#162477,.T.); +#162475 = VERTEX_POINT('',#162476); +#162476 = CARTESIAN_POINT('',(105.695419,-105.671109,1.585)); +#162477 = LINE('',#162478,#162479); +#162478 = CARTESIAN_POINT('',(105.720238,-105.422919,1.585)); +#162479 = VECTOR('',#162480,1.); +#162480 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#162481 = ORIENTED_EDGE('',*,*,#162482,.T.); +#162482 = EDGE_CURVE('',#162475,#162483,#162485,.T.); +#162483 = VERTEX_POINT('',#162484); +#162484 = CARTESIAN_POINT('',(105.73297,-105.655312,1.585)); +#162485 = LINE('',#162486,#162487); +#162486 = CARTESIAN_POINT('',(105.695419,-105.671109,1.585)); +#162487 = VECTOR('',#162488,1.); +#162488 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#162489 = ORIENTED_EDGE('',*,*,#162490,.T.); +#162490 = EDGE_CURVE('',#162483,#162491,#162493,.T.); +#162491 = VERTEX_POINT('',#162492); +#162492 = CARTESIAN_POINT('',(106.005506,-105.656534,1.585)); +#162493 = LINE('',#162494,#162495); +#162494 = CARTESIAN_POINT('',(105.73297,-105.655312,1.585)); +#162495 = VECTOR('',#162496,1.); +#162496 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#162497 = ORIENTED_EDGE('',*,*,#162498,.T.); +#162498 = EDGE_CURVE('',#162491,#162499,#162501,.T.); +#162499 = VERTEX_POINT('',#162500); +#162500 = CARTESIAN_POINT('',(106.249732,-105.904715,1.585)); +#162501 = CIRCLE('',#162502,0.348625649748); +#162502 = AXIS2_PLACEMENT_3D('',#162503,#162504,#162505); +#162503 = CARTESIAN_POINT('',(105.91233404586,-105.9924786838,1.585)); +#162504 = DIRECTION('',(0.,0.,-1.)); +#162505 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162506 = ORIENTED_EDGE('',*,*,#162507,.T.); +#162507 = EDGE_CURVE('',#162499,#162508,#162510,.T.); +#162508 = VERTEX_POINT('',#162509); +#162509 = CARTESIAN_POINT('',(106.24851,-106.177252,1.585)); +#162510 = LINE('',#162511,#162512); +#162511 = CARTESIAN_POINT('',(106.249732,-105.904715,1.585)); +#162512 = VECTOR('',#162513,1.); +#162513 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162514 = ORIENTED_EDGE('',*,*,#162515,.T.); +#162515 = EDGE_CURVE('',#162508,#162516,#162518,.T.); +#162516 = VERTEX_POINT('',#162517); +#162517 = CARTESIAN_POINT('',(106.000329,-106.421478,1.585)); +#162518 = CIRCLE('',#162519,0.348635327447); +#162519 = AXIS2_PLACEMENT_3D('',#162520,#162521,#162522); +#162520 = CARTESIAN_POINT('',(105.91255748129,-106.0840720841,1.585)); +#162521 = DIRECTION('',(0.,0.,-1.)); +#162522 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162523 = ORIENTED_EDGE('',*,*,#162524,.T.); +#162524 = EDGE_CURVE('',#162516,#162525,#162527,.T.); +#162525 = VERTEX_POINT('',#162526); +#162526 = CARTESIAN_POINT('',(105.727792,-106.420256,1.585)); +#162527 = LINE('',#162528,#162529); +#162528 = CARTESIAN_POINT('',(106.000329,-106.421478,1.585)); +#162529 = VECTOR('',#162530,1.); +#162530 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#162531 = ORIENTED_EDGE('',*,*,#162532,.T.); +#162532 = EDGE_CURVE('',#162525,#162533,#162535,.T.); +#162533 = VERTEX_POINT('',#162534); +#162534 = CARTESIAN_POINT('',(105.626787,-106.369054,1.585)); +#162535 = LINE('',#162536,#162537); +#162536 = CARTESIAN_POINT('',(105.727792,-106.420256,1.585)); +#162537 = VECTOR('',#162538,1.); +#162538 = DIRECTION('',(-0.891942715827,0.452148417759,0.)); +#162539 = ORIENTED_EDGE('',*,*,#162540,.T.); +#162540 = EDGE_CURVE('',#162533,#162541,#162543,.T.); +#162541 = VERTEX_POINT('',#162542); +#162542 = CARTESIAN_POINT('',(105.628068,-106.365964,1.585)); +#162543 = LINE('',#162544,#162545); +#162544 = CARTESIAN_POINT('',(105.626787,-106.369054,1.585)); +#162545 = VECTOR('',#162546,1.); +#162546 = DIRECTION('',(0.382959025184,0.923765330065,0.)); +#162547 = ORIENTED_EDGE('',*,*,#162548,.T.); +#162548 = EDGE_CURVE('',#162541,#162549,#162551,.T.); +#162549 = VERTEX_POINT('',#162550); +#162550 = CARTESIAN_POINT('',(105.564286,-106.21198,1.585)); +#162551 = CIRCLE('',#162552,0.149999366947); +#162552 = AXIS2_PLACEMENT_3D('',#162553,#162554,#162555); +#162553 = CARTESIAN_POINT('',(105.48095094324,-106.3367,1.585)); +#162554 = DIRECTION('',(0.,-0.,1.)); +#162555 = DIRECTION('',(0.980784517629,-0.1950941567,-0.)); +#162556 = ORIENTED_EDGE('',*,*,#162557,.T.); +#162557 = EDGE_CURVE('',#162549,#162558,#162560,.T.); +#162558 = VERTEX_POINT('',#162559); +#162559 = CARTESIAN_POINT('',(105.548115,-106.205281,1.585)); +#162560 = LINE('',#162561,#162562); +#162561 = CARTESIAN_POINT('',(105.564286,-106.21198,1.585)); +#162562 = VECTOR('',#162563,1.); +#162563 = DIRECTION('',(-0.923864332505,0.382720126365,0.)); +#162564 = ORIENTED_EDGE('',*,*,#162565,.T.); +#162565 = EDGE_CURVE('',#162558,#162566,#162568,.T.); +#162566 = VERTEX_POINT('',#162567); +#162567 = CARTESIAN_POINT('',(105.563078,-106.190319,1.585)); +#162568 = LINE('',#162569,#162570); +#162569 = CARTESIAN_POINT('',(105.548115,-106.205281,1.585)); +#162570 = VECTOR('',#162571,1.); +#162571 = DIRECTION('',(0.707130410091,0.707083151492,0.)); +#162572 = ORIENTED_EDGE('',*,*,#162573,.T.); +#162573 = EDGE_CURVE('',#162566,#162574,#162576,.T.); +#162574 = VERTEX_POINT('',#162575); +#162575 = CARTESIAN_POINT('',(105.657779,-106.199648,1.585)); +#162576 = CIRCLE('',#162577,7.500097510826E-02); +#162577 = AXIS2_PLACEMENT_3D('',#162578,#162579,#162580); +#162578 = CARTESIAN_POINT('',(105.60474470643,-106.2526811026,1.585)); +#162579 = DIRECTION('',(0.,0.,-1.)); +#162580 = DIRECTION('',(-0.555548862809,0.831483891024,0.)); +#162581 = ORIENTED_EDGE('',*,*,#162582,.T.); +#162582 = EDGE_CURVE('',#162574,#162583,#162585,.T.); +#162583 = VERTEX_POINT('',#162584); +#162584 = CARTESIAN_POINT('',(105.696791,-106.238661,1.585)); +#162585 = LINE('',#162586,#162587); +#162586 = CARTESIAN_POINT('',(105.657779,-106.199648,1.585)); +#162587 = VECTOR('',#162588,1.); +#162588 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#162589 = ORIENTED_EDGE('',*,*,#162590,.T.); +#162590 = EDGE_CURVE('',#162583,#162591,#162593,.T.); +#162591 = VERTEX_POINT('',#162592); +#162592 = CARTESIAN_POINT('',(106.036507,-106.238661,1.585)); +#162593 = CIRCLE('',#162594,0.305620374329); +#162594 = AXIS2_PLACEMENT_3D('',#162595,#162596,#162597); +#162595 = CARTESIAN_POINT('',(105.866649,-105.98459,1.585)); +#162596 = DIRECTION('',(0.,0.,1.)); +#162597 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#162598 = ORIENTED_EDGE('',*,*,#162599,.T.); +#162599 = EDGE_CURVE('',#162591,#162600,#162602,.T.); +#162600 = VERTEX_POINT('',#162601); +#162601 = CARTESIAN_POINT('',(106.066914,-106.208253,1.585)); +#162602 = LINE('',#162603,#162604); +#162603 = CARTESIAN_POINT('',(106.036507,-106.238661,1.585)); +#162604 = VECTOR('',#162605,1.); +#162605 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162606 = ORIENTED_EDGE('',*,*,#162607,.T.); +#162607 = EDGE_CURVE('',#162600,#162608,#162610,.T.); +#162608 = VERTEX_POINT('',#162609); +#162609 = CARTESIAN_POINT('',(106.066915,-105.868536,1.585)); +#162610 = CIRCLE('',#162611,0.305616146029); +#162611 = AXIS2_PLACEMENT_3D('',#162612,#162613,#162614); +#162612 = CARTESIAN_POINT('',(105.81284892049,-106.0383937521,1.585)); +#162613 = DIRECTION('',(0.,-0.,1.)); +#162614 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162615 = ORIENTED_EDGE('',*,*,#162616,.T.); +#162616 = EDGE_CURVE('',#162608,#162617,#162619,.T.); +#162617 = VERTEX_POINT('',#162618); +#162618 = CARTESIAN_POINT('',(106.036508,-105.838129,1.585)); +#162619 = LINE('',#162620,#162621); +#162620 = CARTESIAN_POINT('',(106.066915,-105.868536,1.585)); +#162621 = VECTOR('',#162622,1.); +#162622 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162623 = ORIENTED_EDGE('',*,*,#162624,.T.); +#162624 = EDGE_CURVE('',#162617,#162625,#162627,.T.); +#162625 = VERTEX_POINT('',#162626); +#162626 = CARTESIAN_POINT('',(105.696791,-105.838129,1.585)); +#162627 = CIRCLE('',#162628,0.305621483548); +#162628 = AXIS2_PLACEMENT_3D('',#162629,#162630,#162631); +#162629 = CARTESIAN_POINT('',(105.8666495,-106.092201,1.585)); +#162630 = DIRECTION('',(0.,0.,1.)); +#162631 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#162632 = ORIENTED_EDGE('',*,*,#162633,.T.); +#162633 = EDGE_CURVE('',#162625,#162634,#162636,.T.); +#162634 = VERTEX_POINT('',#162635); +#162635 = CARTESIAN_POINT('',(105.640001,-105.890306,1.585)); +#162636 = LINE('',#162637,#162638); +#162637 = CARTESIAN_POINT('',(105.696791,-105.838129,1.585)); +#162638 = VECTOR('',#162639,1.); +#162639 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#162640 = ORIENTED_EDGE('',*,*,#162641,.T.); +#162641 = EDGE_CURVE('',#162634,#162642,#162644,.T.); +#162642 = VERTEX_POINT('',#162643); +#162643 = CARTESIAN_POINT('',(105.530095,-105.831349,1.585)); +#162644 = CIRCLE('',#162645,7.500024172471E-02); +#162645 = AXIS2_PLACEMENT_3D('',#162646,#162647,#162648); +#162646 = CARTESIAN_POINT('',(105.60474497002,-105.8241089561,1.585)); +#162647 = DIRECTION('',(-0.,0.,-1.)); +#162648 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#162649 = ORIENTED_EDGE('',*,*,#162650,.T.); +#162650 = EDGE_CURVE('',#162642,#162439,#162651,.T.); +#162651 = LINE('',#162652,#162653); +#162652 = CARTESIAN_POINT('',(105.530095,-105.831349,1.585)); +#162653 = VECTOR('',#162654,1.); +#162654 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#162655 = PLANE('',#162656); +#162656 = AXIS2_PLACEMENT_3D('',#162657,#162658,#162659); +#162657 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162658 = DIRECTION('',(0.,0.,1.)); +#162659 = DIRECTION('',(1.,0.,-0.)); +#162660 = SHELL_BASED_SURFACE_MODEL('',(#162661)); +#162661 = OPEN_SHELL('',(#162662)); +#162662 = ADVANCED_FACE('',(#162663,#162806),#162876,.T.); +#162663 = FACE_BOUND('',#162664,.F.); +#162664 = EDGE_LOOP('',(#162665,#162676,#162684,#162692,#162701,#162709, + #162717,#162725,#162733,#162741,#162749,#162757,#162766,#162774, + #162783,#162791,#162800)); +#162665 = ORIENTED_EDGE('',*,*,#162666,.T.); +#162666 = EDGE_CURVE('',#162667,#162669,#162671,.T.); +#162667 = VERTEX_POINT('',#162668); +#162668 = CARTESIAN_POINT('',(106.484365,-105.7583,1.585)); +#162669 = VERTEX_POINT('',#162670); +#162670 = CARTESIAN_POINT('',(106.714061,-105.328456,1.585)); +#162671 = CIRCLE('',#162672,0.610092147705); +#162672 = AXIS2_PLACEMENT_3D('',#162673,#162674,#162675); +#162673 = CARTESIAN_POINT('',(107.09251174024,-105.8069823481,1.585)); +#162674 = DIRECTION('',(0.,0.,-1.)); +#162675 = DIRECTION('',(-0.99681128913,7.97950741736E-02,0.)); +#162676 = ORIENTED_EDGE('',*,*,#162677,.T.); +#162677 = EDGE_CURVE('',#162669,#162678,#162680,.T.); +#162678 = VERTEX_POINT('',#162679); +#162679 = CARTESIAN_POINT('',(106.828208,-105.27436,1.585)); +#162680 = LINE('',#162681,#162682); +#162681 = CARTESIAN_POINT('',(106.714061,-105.328456,1.585)); +#162682 = VECTOR('',#162683,1.); +#162683 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#162684 = ORIENTED_EDGE('',*,*,#162685,.T.); +#162685 = EDGE_CURVE('',#162678,#162686,#162688,.T.); +#162686 = VERTEX_POINT('',#162687); +#162687 = CARTESIAN_POINT('',(107.047948,-105.27436,1.585)); +#162688 = LINE('',#162689,#162690); +#162689 = CARTESIAN_POINT('',(106.828208,-105.27436,1.585)); +#162690 = VECTOR('',#162691,1.); +#162691 = DIRECTION('',(1.,0.,0.)); +#162692 = ORIENTED_EDGE('',*,*,#162693,.T.); +#162693 = EDGE_CURVE('',#162686,#162694,#162696,.T.); +#162694 = VERTEX_POINT('',#162695); +#162695 = CARTESIAN_POINT('',(107.033316,-105.422919,1.585)); +#162696 = CIRCLE('',#162697,7.500006711464E-02); +#162697 = AXIS2_PLACEMENT_3D('',#162698,#162699,#162700); +#162698 = CARTESIAN_POINT('',(107.03331606711,-105.3479189328,1.585)); +#162699 = DIRECTION('',(0.,0.,-1.)); +#162700 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162701 = ORIENTED_EDGE('',*,*,#162702,.T.); +#162702 = EDGE_CURVE('',#162694,#162703,#162705,.T.); +#162703 = VERTEX_POINT('',#162704); +#162704 = CARTESIAN_POINT('',(106.860545,-105.422919,1.585)); +#162705 = LINE('',#162706,#162707); +#162706 = CARTESIAN_POINT('',(107.033316,-105.422919,1.585)); +#162707 = VECTOR('',#162708,1.); +#162708 = DIRECTION('',(-1.,0.,0.)); +#162709 = ORIENTED_EDGE('',*,*,#162710,.T.); +#162710 = EDGE_CURVE('',#162703,#162711,#162713,.T.); +#162711 = VERTEX_POINT('',#162712); +#162712 = CARTESIAN_POINT('',(106.792029,-105.457177,1.585)); +#162713 = LINE('',#162714,#162715); +#162714 = CARTESIAN_POINT('',(106.860545,-105.422919,1.585)); +#162715 = VECTOR('',#162716,1.); +#162716 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#162717 = ORIENTED_EDGE('',*,*,#162718,.T.); +#162718 = EDGE_CURVE('',#162711,#162719,#162721,.T.); +#162719 = VERTEX_POINT('',#162720); +#162720 = CARTESIAN_POINT('',(106.758267,-105.490938,1.585)); +#162721 = LINE('',#162722,#162723); +#162722 = CARTESIAN_POINT('',(106.792029,-105.457177,1.585)); +#162723 = VECTOR('',#162724,1.); +#162724 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#162725 = ORIENTED_EDGE('',*,*,#162726,.T.); +#162726 = EDGE_CURVE('',#162719,#162727,#162729,.T.); +#162727 = VERTEX_POINT('',#162728); +#162728 = CARTESIAN_POINT('',(106.674355,-105.616807,1.585)); +#162729 = LINE('',#162730,#162731); +#162730 = CARTESIAN_POINT('',(106.758267,-105.490938,1.585)); +#162731 = VECTOR('',#162732,1.); +#162732 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#162733 = ORIENTED_EDGE('',*,*,#162734,.T.); +#162734 = EDGE_CURVE('',#162727,#162735,#162737,.T.); +#162735 = VERTEX_POINT('',#162736); +#162736 = CARTESIAN_POINT('',(106.655831,-105.690904,1.585)); +#162737 = LINE('',#162738,#162739); +#162738 = CARTESIAN_POINT('',(106.674355,-105.616807,1.585)); +#162739 = VECTOR('',#162740,1.); +#162740 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#162741 = ORIENTED_EDGE('',*,*,#162742,.T.); +#162742 = EDGE_CURVE('',#162735,#162743,#162745,.T.); +#162743 = VERTEX_POINT('',#162744); +#162744 = CARTESIAN_POINT('',(106.73297,-105.655312,1.585)); +#162745 = LINE('',#162746,#162747); +#162746 = CARTESIAN_POINT('',(106.655831,-105.690904,1.585)); +#162747 = VECTOR('',#162748,1.); +#162748 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#162749 = ORIENTED_EDGE('',*,*,#162750,.T.); +#162750 = EDGE_CURVE('',#162743,#162751,#162753,.T.); +#162751 = VERTEX_POINT('',#162752); +#162752 = CARTESIAN_POINT('',(106.957887,-105.656534,1.585)); +#162753 = LINE('',#162754,#162755); +#162754 = CARTESIAN_POINT('',(106.73297,-105.655312,1.585)); +#162755 = VECTOR('',#162756,1.); +#162756 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#162757 = ORIENTED_EDGE('',*,*,#162758,.T.); +#162758 = EDGE_CURVE('',#162751,#162759,#162761,.T.); +#162759 = VERTEX_POINT('',#162760); +#162760 = CARTESIAN_POINT('',(107.202113,-105.904715,1.585)); +#162761 = CIRCLE('',#162762,0.348625649748); +#162762 = AXIS2_PLACEMENT_3D('',#162763,#162764,#162765); +#162763 = CARTESIAN_POINT('',(106.86471504586,-105.9924786838,1.585)); +#162764 = DIRECTION('',(0.,0.,-1.)); +#162765 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162766 = ORIENTED_EDGE('',*,*,#162767,.T.); +#162767 = EDGE_CURVE('',#162759,#162768,#162770,.T.); +#162768 = VERTEX_POINT('',#162769); +#162769 = CARTESIAN_POINT('',(107.200891,-106.177252,1.585)); +#162770 = LINE('',#162771,#162772); +#162771 = CARTESIAN_POINT('',(107.202113,-105.904715,1.585)); +#162772 = VECTOR('',#162773,1.); +#162773 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#162774 = ORIENTED_EDGE('',*,*,#162775,.T.); +#162775 = EDGE_CURVE('',#162768,#162776,#162778,.T.); +#162776 = VERTEX_POINT('',#162777); +#162777 = CARTESIAN_POINT('',(106.95271,-106.421478,1.585)); +#162778 = CIRCLE('',#162779,0.348635327447); +#162779 = AXIS2_PLACEMENT_3D('',#162780,#162781,#162782); +#162780 = CARTESIAN_POINT('',(106.86493848129,-106.0840720841,1.585)); +#162781 = DIRECTION('',(0.,0.,-1.)); +#162782 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#162783 = ORIENTED_EDGE('',*,*,#162784,.T.); +#162784 = EDGE_CURVE('',#162776,#162785,#162787,.T.); +#162785 = VERTEX_POINT('',#162786); +#162786 = CARTESIAN_POINT('',(106.727792,-106.420256,1.585)); +#162787 = LINE('',#162788,#162789); +#162788 = CARTESIAN_POINT('',(106.95271,-106.421478,1.585)); +#162789 = VECTOR('',#162790,1.); +#162790 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#162791 = ORIENTED_EDGE('',*,*,#162792,.T.); +#162792 = EDGE_CURVE('',#162785,#162793,#162795,.T.); +#162793 = VERTEX_POINT('',#162794); +#162794 = CARTESIAN_POINT('',(106.483567,-106.172074,1.585)); +#162795 = CIRCLE('',#162796,0.348628446662); +#162796 = AXIS2_PLACEMENT_3D('',#162797,#162798,#162799); +#162797 = CARTESIAN_POINT('',(106.82096761322,-106.0843094284,1.585)); +#162798 = DIRECTION('',(0.,0.,-1.)); +#162799 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#162800 = ORIENTED_EDGE('',*,*,#162801,.T.); +#162801 = EDGE_CURVE('',#162793,#162667,#162802,.T.); +#162802 = LINE('',#162803,#162804); +#162803 = CARTESIAN_POINT('',(106.483567,-106.172074,1.585)); +#162804 = VECTOR('',#162805,1.); +#162805 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#162806 = FACE_BOUND('',#162807,.F.); +#162807 = EDGE_LOOP('',(#162808,#162819,#162827,#162836,#162844,#162853, + #162861,#162870)); +#162808 = ORIENTED_EDGE('',*,*,#162809,.T.); +#162809 = EDGE_CURVE('',#162810,#162812,#162814,.T.); +#162810 = VERTEX_POINT('',#162811); +#162811 = CARTESIAN_POINT('',(106.988889,-105.838129,1.585)); +#162812 = VERTEX_POINT('',#162813); +#162813 = CARTESIAN_POINT('',(106.696791,-105.838129,1.585)); +#162814 = CIRCLE('',#162815,0.252889603602); +#162815 = AXIS2_PLACEMENT_3D('',#162816,#162817,#162818); +#162816 = CARTESIAN_POINT('',(106.84284,-106.044582,1.585)); +#162817 = DIRECTION('',(0.,0.,1.)); +#162818 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#162819 = ORIENTED_EDGE('',*,*,#162820,.T.); +#162820 = EDGE_CURVE('',#162812,#162821,#162823,.T.); +#162821 = VERTEX_POINT('',#162822); +#162822 = CARTESIAN_POINT('',(106.666384,-105.868536,1.585)); +#162823 = LINE('',#162824,#162825); +#162824 = CARTESIAN_POINT('',(106.696791,-105.838129,1.585)); +#162825 = VECTOR('',#162826,1.); +#162826 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#162827 = ORIENTED_EDGE('',*,*,#162828,.T.); +#162828 = EDGE_CURVE('',#162821,#162829,#162831,.T.); +#162829 = VERTEX_POINT('',#162830); +#162830 = CARTESIAN_POINT('',(106.666384,-106.208253,1.585)); +#162831 = CIRCLE('',#162832,0.305621483548); +#162832 = AXIS2_PLACEMENT_3D('',#162833,#162834,#162835); +#162833 = CARTESIAN_POINT('',(106.920456,-106.0383945,1.585)); +#162834 = DIRECTION('',(0.,0.,1.)); +#162835 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#162836 = ORIENTED_EDGE('',*,*,#162837,.T.); +#162837 = EDGE_CURVE('',#162829,#162838,#162840,.T.); +#162838 = VERTEX_POINT('',#162839); +#162839 = CARTESIAN_POINT('',(106.696791,-106.238661,1.585)); +#162840 = LINE('',#162841,#162842); +#162841 = CARTESIAN_POINT('',(106.666384,-106.208253,1.585)); +#162842 = VECTOR('',#162843,1.); +#162843 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#162844 = ORIENTED_EDGE('',*,*,#162845,.T.); +#162845 = EDGE_CURVE('',#162838,#162846,#162848,.T.); +#162846 = VERTEX_POINT('',#162847); +#162847 = CARTESIAN_POINT('',(106.988888,-106.238661,1.585)); +#162848 = CIRCLE('',#162849,0.252888498466); +#162849 = AXIS2_PLACEMENT_3D('',#162850,#162851,#162852); +#162850 = CARTESIAN_POINT('',(106.8428395,-106.032209,1.585)); +#162851 = DIRECTION('',(0.,0.,1.)); +#162852 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#162853 = ORIENTED_EDGE('',*,*,#162854,.T.); +#162854 = EDGE_CURVE('',#162846,#162855,#162857,.T.); +#162855 = VERTEX_POINT('',#162856); +#162856 = CARTESIAN_POINT('',(107.019295,-106.208253,1.585)); +#162857 = LINE('',#162858,#162859); +#162858 = CARTESIAN_POINT('',(106.988888,-106.238661,1.585)); +#162859 = VECTOR('',#162860,1.); +#162860 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#162861 = ORIENTED_EDGE('',*,*,#162862,.T.); +#162862 = EDGE_CURVE('',#162855,#162863,#162865,.T.); +#162863 = VERTEX_POINT('',#162864); +#162864 = CARTESIAN_POINT('',(107.019296,-105.868536,1.585)); +#162865 = CIRCLE('',#162866,0.305616146029); +#162866 = AXIS2_PLACEMENT_3D('',#162867,#162868,#162869); +#162867 = CARTESIAN_POINT('',(106.76522992049,-106.0383937521,1.585)); +#162868 = DIRECTION('',(0.,-0.,1.)); +#162869 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#162870 = ORIENTED_EDGE('',*,*,#162871,.T.); +#162871 = EDGE_CURVE('',#162863,#162810,#162872,.T.); +#162872 = LINE('',#162873,#162874); +#162873 = CARTESIAN_POINT('',(107.019296,-105.868536,1.585)); +#162874 = VECTOR('',#162875,1.); +#162875 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#162876 = PLANE('',#162877); +#162877 = AXIS2_PLACEMENT_3D('',#162878,#162879,#162880); +#162878 = CARTESIAN_POINT('',(0.,0.,1.585)); +#162879 = DIRECTION('',(0.,0.,1.)); +#162880 = DIRECTION('',(1.,0.,-0.)); +#162881 = SHELL_BASED_SURFACE_MODEL('',(#162882)); +#162882 = OPEN_SHELL('',(#162883)); +#162883 = ADVANCED_FACE('',(#162884,#163027),#163097,.T.); +#162884 = FACE_BOUND('',#162885,.F.); +#162885 = EDGE_LOOP('',(#162886,#162897,#162905,#162913,#162922,#162930, + #162938,#162946,#162954,#162962,#162970,#162978,#162987,#162995, + #163004,#163012,#163021)); +#162886 = ORIENTED_EDGE('',*,*,#162887,.T.); +#162887 = EDGE_CURVE('',#162888,#162890,#162892,.T.); +#162888 = VERTEX_POINT('',#162889); +#162889 = CARTESIAN_POINT('',(179.181984,-105.7583,1.585)); +#162890 = VERTEX_POINT('',#162891); +#162891 = CARTESIAN_POINT('',(179.41168,-105.328456,1.585)); +#162892 = CIRCLE('',#162893,0.610092147705); +#162893 = AXIS2_PLACEMENT_3D('',#162894,#162895,#162896); +#162894 = CARTESIAN_POINT('',(179.79013074024,-105.8069823481,1.585)); +#162895 = DIRECTION('',(0.,0.,-1.)); +#162896 = DIRECTION('',(-0.99681128913,7.979507417374E-02,0.)); +#162897 = ORIENTED_EDGE('',*,*,#162898,.T.); +#162898 = EDGE_CURVE('',#162890,#162899,#162901,.T.); +#162899 = VERTEX_POINT('',#162900); +#162900 = CARTESIAN_POINT('',(179.525827,-105.27436,1.585)); +#162901 = LINE('',#162902,#162903); +#162902 = CARTESIAN_POINT('',(179.41168,-105.328456,1.585)); +#162903 = VECTOR('',#162904,1.); +#162904 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#162905 = ORIENTED_EDGE('',*,*,#162906,.T.); +#162906 = EDGE_CURVE('',#162899,#162907,#162909,.T.); +#162907 = VERTEX_POINT('',#162908); +#162908 = CARTESIAN_POINT('',(179.745567,-105.27436,1.585)); +#162909 = LINE('',#162910,#162911); +#162910 = CARTESIAN_POINT('',(179.525827,-105.27436,1.585)); +#162911 = VECTOR('',#162912,1.); +#162912 = DIRECTION('',(1.,0.,0.)); +#162913 = ORIENTED_EDGE('',*,*,#162914,.T.); +#162914 = EDGE_CURVE('',#162907,#162915,#162917,.T.); +#162915 = VERTEX_POINT('',#162916); +#162916 = CARTESIAN_POINT('',(179.730935,-105.422919,1.585)); +#162917 = CIRCLE('',#162918,7.500006711462E-02); +#162918 = AXIS2_PLACEMENT_3D('',#162919,#162920,#162921); +#162919 = CARTESIAN_POINT('',(179.73093506711,-105.3479189328,1.585)); +#162920 = DIRECTION('',(0.,0.,-1.)); +#162921 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#162922 = ORIENTED_EDGE('',*,*,#162923,.T.); +#162923 = EDGE_CURVE('',#162915,#162924,#162926,.T.); +#162924 = VERTEX_POINT('',#162925); +#162925 = CARTESIAN_POINT('',(179.558164,-105.422919,1.585)); +#162926 = LINE('',#162927,#162928); +#162927 = CARTESIAN_POINT('',(179.730935,-105.422919,1.585)); +#162928 = VECTOR('',#162929,1.); +#162929 = DIRECTION('',(-1.,0.,0.)); +#162930 = ORIENTED_EDGE('',*,*,#162931,.T.); +#162931 = EDGE_CURVE('',#162924,#162932,#162934,.T.); +#162932 = VERTEX_POINT('',#162933); +#162933 = CARTESIAN_POINT('',(179.489648,-105.457177,1.585)); +#162934 = LINE('',#162935,#162936); +#162935 = CARTESIAN_POINT('',(179.558164,-105.422919,1.585)); +#162936 = VECTOR('',#162937,1.); +#162937 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#162938 = ORIENTED_EDGE('',*,*,#162939,.T.); +#162939 = EDGE_CURVE('',#162932,#162940,#162942,.T.); +#162940 = VERTEX_POINT('',#162941); +#162941 = CARTESIAN_POINT('',(179.455886,-105.490938,1.585)); +#162942 = LINE('',#162943,#162944); +#162943 = CARTESIAN_POINT('',(179.489648,-105.457177,1.585)); +#162944 = VECTOR('',#162945,1.); +#162945 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#162946 = ORIENTED_EDGE('',*,*,#162947,.T.); +#162947 = EDGE_CURVE('',#162940,#162948,#162950,.T.); +#162948 = VERTEX_POINT('',#162949); +#162949 = CARTESIAN_POINT('',(179.371974,-105.616807,1.585)); +#162950 = LINE('',#162951,#162952); +#162951 = CARTESIAN_POINT('',(179.455886,-105.490938,1.585)); +#162952 = VECTOR('',#162953,1.); +#162953 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#162954 = ORIENTED_EDGE('',*,*,#162955,.T.); +#162955 = EDGE_CURVE('',#162948,#162956,#162958,.T.); +#162956 = VERTEX_POINT('',#162957); +#162957 = CARTESIAN_POINT('',(179.35345,-105.690904,1.585)); +#162958 = LINE('',#162959,#162960); +#162959 = CARTESIAN_POINT('',(179.371974,-105.616807,1.585)); +#162960 = VECTOR('',#162961,1.); +#162961 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#162962 = ORIENTED_EDGE('',*,*,#162963,.T.); +#162963 = EDGE_CURVE('',#162956,#162964,#162966,.T.); +#162964 = VERTEX_POINT('',#162965); +#162965 = CARTESIAN_POINT('',(179.430589,-105.655312,1.585)); +#162966 = LINE('',#162967,#162968); +#162967 = CARTESIAN_POINT('',(179.35345,-105.690904,1.585)); +#162968 = VECTOR('',#162969,1.); +#162969 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#162970 = ORIENTED_EDGE('',*,*,#162971,.T.); +#162971 = EDGE_CURVE('',#162964,#162972,#162974,.T.); +#162972 = VERTEX_POINT('',#162973); +#162973 = CARTESIAN_POINT('',(179.655506,-105.656534,1.585)); +#162974 = LINE('',#162975,#162976); +#162975 = CARTESIAN_POINT('',(179.430589,-105.655312,1.585)); +#162976 = VECTOR('',#162977,1.); +#162977 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#162978 = ORIENTED_EDGE('',*,*,#162979,.T.); +#162979 = EDGE_CURVE('',#162972,#162980,#162982,.T.); +#162980 = VERTEX_POINT('',#162981); +#162981 = CARTESIAN_POINT('',(179.899732,-105.904715,1.585)); +#162982 = CIRCLE('',#162983,0.348625649748); +#162983 = AXIS2_PLACEMENT_3D('',#162984,#162985,#162986); +#162984 = CARTESIAN_POINT('',(179.56233404586,-105.9924786838,1.585)); +#162985 = DIRECTION('',(0.,0.,-1.)); +#162986 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#162987 = ORIENTED_EDGE('',*,*,#162988,.T.); +#162988 = EDGE_CURVE('',#162980,#162989,#162991,.T.); +#162989 = VERTEX_POINT('',#162990); +#162990 = CARTESIAN_POINT('',(179.89851,-106.177252,1.585)); +#162991 = LINE('',#162992,#162993); +#162992 = CARTESIAN_POINT('',(179.899732,-105.904715,1.585)); +#162993 = VECTOR('',#162994,1.); +#162994 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#162995 = ORIENTED_EDGE('',*,*,#162996,.T.); +#162996 = EDGE_CURVE('',#162989,#162997,#162999,.T.); +#162997 = VERTEX_POINT('',#162998); +#162998 = CARTESIAN_POINT('',(179.650329,-106.421478,1.585)); +#162999 = CIRCLE('',#163000,0.348635327447); +#163000 = AXIS2_PLACEMENT_3D('',#163001,#163002,#163003); +#163001 = CARTESIAN_POINT('',(179.56255748129,-106.0840720841,1.585)); +#163002 = DIRECTION('',(0.,0.,-1.)); +#163003 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#163004 = ORIENTED_EDGE('',*,*,#163005,.T.); +#163005 = EDGE_CURVE('',#162997,#163006,#163008,.T.); +#163006 = VERTEX_POINT('',#163007); +#163007 = CARTESIAN_POINT('',(179.425411,-106.420256,1.585)); +#163008 = LINE('',#163009,#163010); +#163009 = CARTESIAN_POINT('',(179.650329,-106.421478,1.585)); +#163010 = VECTOR('',#163011,1.); +#163011 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#163012 = ORIENTED_EDGE('',*,*,#163013,.T.); +#163013 = EDGE_CURVE('',#163006,#163014,#163016,.T.); +#163014 = VERTEX_POINT('',#163015); +#163015 = CARTESIAN_POINT('',(179.181186,-106.172074,1.585)); +#163016 = CIRCLE('',#163017,0.348628446662); +#163017 = AXIS2_PLACEMENT_3D('',#163018,#163019,#163020); +#163018 = CARTESIAN_POINT('',(179.51858661322,-106.0843094284,1.585)); +#163019 = DIRECTION('',(0.,0.,-1.)); +#163020 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#163021 = ORIENTED_EDGE('',*,*,#163022,.T.); +#163022 = EDGE_CURVE('',#163014,#162888,#163023,.T.); +#163023 = LINE('',#163024,#163025); +#163024 = CARTESIAN_POINT('',(179.181186,-106.172074,1.585)); +#163025 = VECTOR('',#163026,1.); +#163026 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#163027 = FACE_BOUND('',#163028,.F.); +#163028 = EDGE_LOOP('',(#163029,#163040,#163048,#163057,#163065,#163074, + #163082,#163091)); +#163029 = ORIENTED_EDGE('',*,*,#163030,.T.); +#163030 = EDGE_CURVE('',#163031,#163033,#163035,.T.); +#163031 = VERTEX_POINT('',#163032); +#163032 = CARTESIAN_POINT('',(179.686508,-105.838129,1.585)); +#163033 = VERTEX_POINT('',#163034); +#163034 = CARTESIAN_POINT('',(179.39441,-105.838129,1.585)); +#163035 = CIRCLE('',#163036,0.252889603602); +#163036 = AXIS2_PLACEMENT_3D('',#163037,#163038,#163039); +#163037 = CARTESIAN_POINT('',(179.540459,-106.044582,1.585)); +#163038 = DIRECTION('',(0.,0.,1.)); +#163039 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#163040 = ORIENTED_EDGE('',*,*,#163041,.T.); +#163041 = EDGE_CURVE('',#163033,#163042,#163044,.T.); +#163042 = VERTEX_POINT('',#163043); +#163043 = CARTESIAN_POINT('',(179.364003,-105.868536,1.585)); +#163044 = LINE('',#163045,#163046); +#163045 = CARTESIAN_POINT('',(179.39441,-105.838129,1.585)); +#163046 = VECTOR('',#163047,1.); +#163047 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#163048 = ORIENTED_EDGE('',*,*,#163049,.T.); +#163049 = EDGE_CURVE('',#163042,#163050,#163052,.T.); +#163050 = VERTEX_POINT('',#163051); +#163051 = CARTESIAN_POINT('',(179.364003,-106.208253,1.585)); +#163052 = CIRCLE('',#163053,0.305621483548); +#163053 = AXIS2_PLACEMENT_3D('',#163054,#163055,#163056); +#163054 = CARTESIAN_POINT('',(179.618075,-106.0383945,1.585)); +#163055 = DIRECTION('',(0.,0.,1.)); +#163056 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#163057 = ORIENTED_EDGE('',*,*,#163058,.T.); +#163058 = EDGE_CURVE('',#163050,#163059,#163061,.T.); +#163059 = VERTEX_POINT('',#163060); +#163060 = CARTESIAN_POINT('',(179.39441,-106.238661,1.585)); +#163061 = LINE('',#163062,#163063); +#163062 = CARTESIAN_POINT('',(179.364003,-106.208253,1.585)); +#163063 = VECTOR('',#163064,1.); +#163064 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#163065 = ORIENTED_EDGE('',*,*,#163066,.T.); +#163066 = EDGE_CURVE('',#163059,#163067,#163069,.T.); +#163067 = VERTEX_POINT('',#163068); +#163068 = CARTESIAN_POINT('',(179.686507,-106.238661,1.585)); +#163069 = CIRCLE('',#163070,0.252888498466); +#163070 = AXIS2_PLACEMENT_3D('',#163071,#163072,#163073); +#163071 = CARTESIAN_POINT('',(179.5404585,-106.032209,1.585)); +#163072 = DIRECTION('',(0.,0.,1.)); +#163073 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#163074 = ORIENTED_EDGE('',*,*,#163075,.T.); +#163075 = EDGE_CURVE('',#163067,#163076,#163078,.T.); +#163076 = VERTEX_POINT('',#163077); +#163077 = CARTESIAN_POINT('',(179.716914,-106.208253,1.585)); +#163078 = LINE('',#163079,#163080); +#163079 = CARTESIAN_POINT('',(179.686507,-106.238661,1.585)); +#163080 = VECTOR('',#163081,1.); +#163081 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#163082 = ORIENTED_EDGE('',*,*,#163083,.T.); +#163083 = EDGE_CURVE('',#163076,#163084,#163086,.T.); +#163084 = VERTEX_POINT('',#163085); +#163085 = CARTESIAN_POINT('',(179.716915,-105.868536,1.585)); +#163086 = CIRCLE('',#163087,0.305616146029); +#163087 = AXIS2_PLACEMENT_3D('',#163088,#163089,#163090); +#163088 = CARTESIAN_POINT('',(179.46284892049,-106.0383937521,1.585)); +#163089 = DIRECTION('',(0.,-0.,1.)); +#163090 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#163091 = ORIENTED_EDGE('',*,*,#163092,.T.); +#163092 = EDGE_CURVE('',#163084,#163031,#163093,.T.); +#163093 = LINE('',#163094,#163095); +#163094 = CARTESIAN_POINT('',(179.716915,-105.868536,1.585)); +#163095 = VECTOR('',#163096,1.); +#163096 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#163097 = PLANE('',#163098); +#163098 = AXIS2_PLACEMENT_3D('',#163099,#163100,#163101); +#163099 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163100 = DIRECTION('',(0.,0.,1.)); +#163101 = DIRECTION('',(1.,0.,-0.)); +#163102 = SHELL_BASED_SURFACE_MODEL('',(#163103)); +#163103 = OPEN_SHELL('',(#163104)); +#163104 = ADVANCED_FACE('',(#163105),#163149,.T.); +#163105 = FACE_BOUND('',#163106,.F.); +#163106 = EDGE_LOOP('',(#163107,#163118,#163126,#163135,#163143)); +#163107 = ORIENTED_EDGE('',*,*,#163108,.T.); +#163108 = EDGE_CURVE('',#163109,#163111,#163113,.T.); +#163109 = VERTEX_POINT('',#163110); +#163110 = CARTESIAN_POINT('',(91.938717,-105.410139,1.585)); +#163111 = VERTEX_POINT('',#163112); +#163112 = CARTESIAN_POINT('',(92.05415,-105.4331,1.585)); +#163113 = CIRCLE('',#163114,6.000007318648E-02); +#163114 = AXIS2_PLACEMENT_3D('',#163115,#163116,#163117); +#163115 = CARTESIAN_POINT('',(91.994149926814,-105.4330998233,1.585)); +#163116 = DIRECTION('',(0.,0.,-1.)); +#163117 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#163118 = ORIENTED_EDGE('',*,*,#163119,.T.); +#163119 = EDGE_CURVE('',#163111,#163120,#163122,.T.); +#163120 = VERTEX_POINT('',#163121); +#163121 = CARTESIAN_POINT('',(92.05415,-106.2131,1.585)); +#163122 = LINE('',#163123,#163124); +#163123 = CARTESIAN_POINT('',(92.05415,-105.4331,1.585)); +#163124 = VECTOR('',#163125,1.); +#163125 = DIRECTION('',(0.,-1.,0.)); +#163126 = ORIENTED_EDGE('',*,*,#163127,.T.); +#163127 = EDGE_CURVE('',#163120,#163128,#163130,.T.); +#163128 = VERTEX_POINT('',#163129); +#163129 = CARTESIAN_POINT('',(91.93415,-106.2131,1.585)); +#163130 = CIRCLE('',#163131,6.000000000043E-02); +#163131 = AXIS2_PLACEMENT_3D('',#163132,#163133,#163134); +#163132 = CARTESIAN_POINT('',(91.99415,-106.2131002255,1.585)); +#163133 = DIRECTION('',(0.,0.,-1.)); +#163134 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#163135 = ORIENTED_EDGE('',*,*,#163136,.T.); +#163136 = EDGE_CURVE('',#163128,#163137,#163139,.T.); +#163137 = VERTEX_POINT('',#163138); +#163138 = CARTESIAN_POINT('',(91.93415,-105.4331,1.585)); +#163139 = LINE('',#163140,#163141); +#163140 = CARTESIAN_POINT('',(91.93415,-106.2131,1.585)); +#163141 = VECTOR('',#163142,1.); +#163142 = DIRECTION('',(0.,1.,0.)); +#163143 = ORIENTED_EDGE('',*,*,#163144,.T.); +#163144 = EDGE_CURVE('',#163137,#163109,#163145,.T.); +#163145 = LINE('',#163146,#163147); +#163146 = CARTESIAN_POINT('',(91.93415,-105.4331,1.585)); +#163147 = VECTOR('',#163148,1.); +#163148 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#163149 = PLANE('',#163150); +#163150 = AXIS2_PLACEMENT_3D('',#163151,#163152,#163153); +#163151 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163152 = DIRECTION('',(0.,0.,1.)); +#163153 = DIRECTION('',(1.,0.,-0.)); +#163154 = SHELL_BASED_SURFACE_MODEL('',(#163155)); +#163155 = OPEN_SHELL('',(#163156)); +#163156 = ADVANCED_FACE('',(#163157),#163291,.T.); +#163157 = FACE_BOUND('',#163158,.F.); +#163158 = EDGE_LOOP('',(#163159,#163169,#163177,#163186,#163194,#163202, + #163211,#163219,#163228,#163236,#163244,#163252,#163260,#163269, + #163277,#163285)); +#163159 = ORIENTED_EDGE('',*,*,#163160,.T.); +#163160 = EDGE_CURVE('',#163161,#163163,#163165,.T.); +#163161 = VERTEX_POINT('',#163162); +#163162 = CARTESIAN_POINT('',(114.019514,-105.076941,1.585)); +#163163 = VERTEX_POINT('',#163164); +#163164 = CARTESIAN_POINT('',(114.05797,-105.05636,1.585)); +#163165 = LINE('',#163166,#163167); +#163166 = CARTESIAN_POINT('',(114.019514,-105.076941,1.585)); +#163167 = VECTOR('',#163168,1.); +#163168 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#163169 = ORIENTED_EDGE('',*,*,#163170,.T.); +#163170 = EDGE_CURVE('',#163163,#163171,#163173,.T.); +#163171 = VERTEX_POINT('',#163172); +#163172 = CARTESIAN_POINT('',(114.079807,-105.05636,1.585)); +#163173 = LINE('',#163174,#163175); +#163174 = CARTESIAN_POINT('',(114.05797,-105.05636,1.585)); +#163175 = VECTOR('',#163176,1.); +#163176 = DIRECTION('',(1.,0.,0.)); +#163177 = ORIENTED_EDGE('',*,*,#163178,.T.); +#163178 = EDGE_CURVE('',#163171,#163179,#163181,.T.); +#163179 = VERTEX_POINT('',#163180); +#163180 = CARTESIAN_POINT('',(114.147602,-105.129919,1.585)); +#163181 = CIRCLE('',#163182,7.216898094229E-02); +#163182 = AXIS2_PLACEMENT_3D('',#163183,#163184,#163185); +#163183 = CARTESIAN_POINT('',(114.07544906389,-105.1283972834,1.585)); +#163184 = DIRECTION('',(0.,0.,-1.)); +#163185 = DIRECTION('',(6.038516895284E-02,0.998175150648,0.)); +#163186 = ORIENTED_EDGE('',*,*,#163187,.T.); +#163187 = EDGE_CURVE('',#163179,#163188,#163190,.T.); +#163188 = VERTEX_POINT('',#163189); +#163189 = CARTESIAN_POINT('',(114.147602,-106.054919,1.585)); +#163190 = LINE('',#163191,#163192); +#163191 = CARTESIAN_POINT('',(114.147602,-105.129919,1.585)); +#163192 = VECTOR('',#163193,1.); +#163193 = DIRECTION('',(0.,-1.,0.)); +#163194 = ORIENTED_EDGE('',*,*,#163195,.T.); +#163195 = EDGE_CURVE('',#163188,#163196,#163198,.T.); +#163196 = VERTEX_POINT('',#163197); +#163197 = CARTESIAN_POINT('',(114.372948,-106.05636,1.585)); +#163198 = LINE('',#163199,#163200); +#163199 = CARTESIAN_POINT('',(114.147602,-106.054919,1.585)); +#163200 = VECTOR('',#163201,1.); +#163201 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#163202 = ORIENTED_EDGE('',*,*,#163203,.T.); +#163203 = EDGE_CURVE('',#163196,#163204,#163206,.T.); +#163204 = VERTEX_POINT('',#163205); +#163205 = CARTESIAN_POINT('',(114.358316,-106.204919,1.585)); +#163206 = CIRCLE('',#163207,7.500006711464E-02); +#163207 = AXIS2_PLACEMENT_3D('',#163208,#163209,#163210); +#163208 = CARTESIAN_POINT('',(114.35831606711,-106.1299189328,1.585)); +#163209 = DIRECTION('',(0.,0.,-1.)); +#163210 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#163211 = ORIENTED_EDGE('',*,*,#163212,.T.); +#163212 = EDGE_CURVE('',#163204,#163213,#163215,.T.); +#163213 = VERTEX_POINT('',#163214); +#163214 = CARTESIAN_POINT('',(113.772256,-106.203478,1.585)); +#163215 = LINE('',#163216,#163217); +#163216 = CARTESIAN_POINT('',(114.358316,-106.204919,1.585)); +#163217 = VECTOR('',#163218,1.); +#163218 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#163219 = ORIENTED_EDGE('',*,*,#163220,.T.); +#163220 = EDGE_CURVE('',#163213,#163221,#163223,.T.); +#163221 = VERTEX_POINT('',#163222); +#163222 = CARTESIAN_POINT('',(113.786888,-106.054919,1.585)); +#163223 = CIRCLE('',#163224,7.500006711464E-02); +#163224 = AXIS2_PLACEMENT_3D('',#163225,#163226,#163227); +#163225 = CARTESIAN_POINT('',(113.78688793288,-106.1299190671,1.585)); +#163226 = DIRECTION('',(0.,0.,-1.)); +#163227 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#163228 = ORIENTED_EDGE('',*,*,#163229,.T.); +#163229 = EDGE_CURVE('',#163221,#163230,#163232,.T.); +#163230 = VERTEX_POINT('',#163231); +#163231 = CARTESIAN_POINT('',(113.997602,-106.054919,1.585)); +#163232 = LINE('',#163233,#163234); +#163233 = CARTESIAN_POINT('',(113.786888,-106.054919,1.585)); +#163234 = VECTOR('',#163235,1.); +#163235 = DIRECTION('',(1.,0.,0.)); +#163236 = ORIENTED_EDGE('',*,*,#163237,.T.); +#163237 = EDGE_CURVE('',#163230,#163238,#163240,.T.); +#163238 = VERTEX_POINT('',#163239); +#163239 = CARTESIAN_POINT('',(113.997602,-105.358604,1.585)); +#163240 = LINE('',#163241,#163242); +#163241 = CARTESIAN_POINT('',(113.997602,-106.054919,1.585)); +#163242 = VECTOR('',#163243,1.); +#163243 = DIRECTION('',(0.,1.,0.)); +#163244 = ORIENTED_EDGE('',*,*,#163245,.T.); +#163245 = EDGE_CURVE('',#163238,#163246,#163248,.T.); +#163246 = VERTEX_POINT('',#163247); +#163247 = CARTESIAN_POINT('',(113.921966,-105.431131,1.585)); +#163248 = LINE('',#163249,#163250); +#163249 = CARTESIAN_POINT('',(113.997602,-105.358604,1.585)); +#163250 = VECTOR('',#163251,1.); +#163251 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#163252 = ORIENTED_EDGE('',*,*,#163253,.T.); +#163253 = EDGE_CURVE('',#163246,#163254,#163256,.T.); +#163254 = VERTEX_POINT('',#163255); +#163255 = CARTESIAN_POINT('',(113.806697,-105.48797,1.585)); +#163256 = LINE('',#163257,#163258); +#163257 = CARTESIAN_POINT('',(113.921966,-105.431131,1.585)); +#163258 = VECTOR('',#163259,1.); +#163259 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#163260 = ORIENTED_EDGE('',*,*,#163261,.T.); +#163261 = EDGE_CURVE('',#163254,#163262,#163264,.T.); +#163262 = VERTEX_POINT('',#163263); +#163263 = CARTESIAN_POINT('',(113.753347,-105.348551,1.585)); +#163264 = CIRCLE('',#163265,7.500005272361E-02); +#163265 = AXIS2_PLACEMENT_3D('',#163266,#163267,#163268); +#163266 = CARTESIAN_POINT('',(113.78688755676,-105.4156333297,1.585)); +#163267 = DIRECTION('',(0.,0.,-1.)); +#163268 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#163269 = ORIENTED_EDGE('',*,*,#163270,.T.); +#163270 = EDGE_CURVE('',#163262,#163271,#163273,.T.); +#163271 = VERTEX_POINT('',#163272); +#163272 = CARTESIAN_POINT('',(113.837699,-105.306375,1.585)); +#163273 = LINE('',#163274,#163275); +#163274 = CARTESIAN_POINT('',(113.753347,-105.348551,1.585)); +#163275 = VECTOR('',#163276,1.); +#163276 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#163277 = ORIENTED_EDGE('',*,*,#163278,.T.); +#163278 = EDGE_CURVE('',#163271,#163279,#163281,.T.); +#163279 = VERTEX_POINT('',#163280); +#163280 = CARTESIAN_POINT('',(113.919078,-105.224996,1.585)); +#163281 = LINE('',#163282,#163283); +#163282 = CARTESIAN_POINT('',(113.837699,-105.306375,1.585)); +#163283 = VECTOR('',#163284,1.); +#163284 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163285 = ORIENTED_EDGE('',*,*,#163286,.T.); +#163286 = EDGE_CURVE('',#163279,#163161,#163287,.T.); +#163287 = LINE('',#163288,#163289); +#163288 = CARTESIAN_POINT('',(113.919078,-105.224996,1.585)); +#163289 = VECTOR('',#163290,1.); +#163290 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#163291 = PLANE('',#163292); +#163292 = AXIS2_PLACEMENT_3D('',#163293,#163294,#163295); +#163293 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163294 = DIRECTION('',(0.,0.,1.)); +#163295 = DIRECTION('',(1.,0.,-0.)); +#163296 = SHELL_BASED_SURFACE_MODEL('',(#163297)); +#163297 = OPEN_SHELL('',(#163298)); +#163298 = ADVANCED_FACE('',(#163299),#163368,.T.); +#163299 = FACE_BOUND('',#163300,.F.); +#163300 = EDGE_LOOP('',(#163301,#163312,#163320,#163329,#163337,#163345, + #163354,#163362)); +#163301 = ORIENTED_EDGE('',*,*,#163302,.T.); +#163302 = EDGE_CURVE('',#163303,#163305,#163307,.T.); +#163303 = VERTEX_POINT('',#163304); +#163304 = CARTESIAN_POINT('',(111.915113,-105.203478,1.585)); +#163305 = VERTEX_POINT('',#163306); +#163306 = CARTESIAN_POINT('',(111.929745,-105.054919,1.585)); +#163307 = CIRCLE('',#163308,7.500006711464E-02); +#163308 = AXIS2_PLACEMENT_3D('',#163309,#163310,#163311); +#163309 = CARTESIAN_POINT('',(111.92974493288,-105.1299190671,1.585)); +#163310 = DIRECTION('',(0.,0.,-1.)); +#163311 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#163312 = ORIENTED_EDGE('',*,*,#163313,.T.); +#163313 = EDGE_CURVE('',#163305,#163314,#163316,.T.); +#163314 = VERTEX_POINT('',#163315); +#163315 = CARTESIAN_POINT('',(112.515805,-105.05636,1.585)); +#163316 = LINE('',#163317,#163318); +#163317 = CARTESIAN_POINT('',(111.929745,-105.054919,1.585)); +#163318 = VECTOR('',#163319,1.); +#163319 = DIRECTION('',(0.999996977183,-2.45878518261E-03,0.)); +#163320 = ORIENTED_EDGE('',*,*,#163321,.T.); +#163321 = EDGE_CURVE('',#163314,#163322,#163324,.T.); +#163322 = VERTEX_POINT('',#163323); +#163323 = CARTESIAN_POINT('',(112.501173,-105.204919,1.585)); +#163324 = CIRCLE('',#163325,7.500006711464E-02); +#163325 = AXIS2_PLACEMENT_3D('',#163326,#163327,#163328); +#163326 = CARTESIAN_POINT('',(112.50117306711,-105.1299189328,1.585)); +#163327 = DIRECTION('',(0.,0.,-1.)); +#163328 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#163329 = ORIENTED_EDGE('',*,*,#163330,.T.); +#163330 = EDGE_CURVE('',#163322,#163331,#163333,.T.); +#163331 = VERTEX_POINT('',#163332); +#163332 = CARTESIAN_POINT('',(112.290459,-105.204919,1.585)); +#163333 = LINE('',#163334,#163335); +#163334 = CARTESIAN_POINT('',(112.501173,-105.204919,1.585)); +#163335 = VECTOR('',#163336,1.); +#163336 = DIRECTION('',(-1.,0.,0.)); +#163337 = ORIENTED_EDGE('',*,*,#163338,.T.); +#163338 = EDGE_CURVE('',#163331,#163339,#163341,.T.); +#163339 = VERTEX_POINT('',#163340); +#163340 = CARTESIAN_POINT('',(112.289018,-106.144551,1.585)); +#163341 = LINE('',#163342,#163343); +#163342 = CARTESIAN_POINT('',(112.290459,-105.204919,1.585)); +#163343 = VECTOR('',#163344,1.); +#163344 = DIRECTION('',(-1.533577299926E-03,-0.99999882407,0.)); +#163345 = ORIENTED_EDGE('',*,*,#163346,.T.); +#163346 = EDGE_CURVE('',#163339,#163347,#163349,.T.); +#163347 = VERTEX_POINT('',#163348); +#163348 = CARTESIAN_POINT('',(112.140459,-106.129919,1.585)); +#163349 = CIRCLE('',#163350,7.500006711464E-02); +#163350 = AXIS2_PLACEMENT_3D('',#163351,#163352,#163353); +#163351 = CARTESIAN_POINT('',(112.21545906711,-106.1299190671,1.585)); +#163352 = DIRECTION('',(-0.,0.,-1.)); +#163353 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#163354 = ORIENTED_EDGE('',*,*,#163355,.T.); +#163355 = EDGE_CURVE('',#163347,#163356,#163358,.T.); +#163356 = VERTEX_POINT('',#163357); +#163357 = CARTESIAN_POINT('',(112.140459,-105.204919,1.585)); +#163358 = LINE('',#163359,#163360); +#163359 = CARTESIAN_POINT('',(112.140459,-106.129919,1.585)); +#163360 = VECTOR('',#163361,1.); +#163361 = DIRECTION('',(0.,1.,0.)); +#163362 = ORIENTED_EDGE('',*,*,#163363,.T.); +#163363 = EDGE_CURVE('',#163356,#163303,#163364,.T.); +#163364 = LINE('',#163365,#163366); +#163365 = CARTESIAN_POINT('',(112.140459,-105.204919,1.585)); +#163366 = VECTOR('',#163367,1.); +#163367 = DIRECTION('',(-0.999979555102,6.394480216655E-03,0.)); +#163368 = PLANE('',#163369); +#163369 = AXIS2_PLACEMENT_3D('',#163370,#163371,#163372); +#163370 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163371 = DIRECTION('',(0.,0.,1.)); +#163372 = DIRECTION('',(1.,0.,-0.)); +#163373 = SHELL_BASED_SURFACE_MODEL('',(#163374)); +#163374 = OPEN_SHELL('',(#163375)); +#163375 = ADVANCED_FACE('',(#163376,#163454),#163506,.T.); +#163376 = FACE_BOUND('',#163377,.F.); +#163377 = EDGE_LOOP('',(#163378,#163389,#163397,#163406,#163414,#163423, + #163431,#163439,#163448)); +#163378 = ORIENTED_EDGE('',*,*,#163379,.T.); +#163379 = EDGE_CURVE('',#163380,#163382,#163384,.T.); +#163380 = VERTEX_POINT('',#163381); +#163381 = CARTESIAN_POINT('',(112.760948,-105.115287,1.585)); +#163382 = VERTEX_POINT('',#163383); +#163383 = CARTESIAN_POINT('',(112.834507,-105.054919,1.585)); +#163384 = CIRCLE('',#163385,7.500074938986E-02); +#163385 = AXIS2_PLACEMENT_3D('',#163386,#163387,#163388); +#163386 = CARTESIAN_POINT('',(112.83450746611,-105.1299197493,1.585)); +#163387 = DIRECTION('',(0.,0.,-1.)); +#163388 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#163389 = ORIENTED_EDGE('',*,*,#163390,.T.); +#163390 = EDGE_CURVE('',#163382,#163391,#163393,.T.); +#163391 = VERTEX_POINT('',#163392); +#163392 = CARTESIAN_POINT('',(113.230091,-105.05636,1.585)); +#163393 = LINE('',#163394,#163395); +#163394 = CARTESIAN_POINT('',(112.834507,-105.054919,1.585)); +#163395 = VECTOR('',#163396,1.); +#163396 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#163397 = ORIENTED_EDGE('',*,*,#163398,.T.); +#163398 = EDGE_CURVE('',#163391,#163399,#163401,.T.); +#163399 = VERTEX_POINT('',#163400); +#163400 = CARTESIAN_POINT('',(113.479494,-105.305763,1.585)); +#163401 = CIRCLE('',#163402,0.347870264855); +#163402 = AXIS2_PLACEMENT_3D('',#163403,#163404,#163405); +#163403 = CARTESIAN_POINT('',(113.14276326502,-105.3930907349,1.585)); +#163404 = DIRECTION('',(0.,0.,-1.)); +#163405 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#163406 = ORIENTED_EDGE('',*,*,#163407,.T.); +#163407 = EDGE_CURVE('',#163399,#163408,#163410,.T.); +#163408 = VERTEX_POINT('',#163409); +#163409 = CARTESIAN_POINT('',(113.478272,-105.483062,1.585)); +#163410 = LINE('',#163411,#163412); +#163411 = CARTESIAN_POINT('',(113.479494,-105.305763,1.585)); +#163412 = VECTOR('',#163413,1.); +#163413 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#163414 = ORIENTED_EDGE('',*,*,#163415,.T.); +#163415 = EDGE_CURVE('',#163408,#163416,#163418,.T.); +#163416 = VERTEX_POINT('',#163417); +#163417 = CARTESIAN_POINT('',(113.230091,-105.727287,1.585)); +#163418 = CIRCLE('',#163419,0.348632345849); +#163419 = AXIS2_PLACEMENT_3D('',#163420,#163421,#163422); +#163420 = CARTESIAN_POINT('',(113.14232219403,-105.3898834593,1.585)); +#163421 = DIRECTION('',(0.,0.,-1.)); +#163422 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#163423 = ORIENTED_EDGE('',*,*,#163424,.T.); +#163424 = EDGE_CURVE('',#163416,#163425,#163427,.T.); +#163425 = VERTEX_POINT('',#163426); +#163426 = CARTESIAN_POINT('',(112.909507,-105.728728,1.585)); +#163427 = LINE('',#163428,#163429); +#163428 = CARTESIAN_POINT('',(113.230091,-105.727287,1.585)); +#163429 = VECTOR('',#163430,1.); +#163430 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#163431 = ORIENTED_EDGE('',*,*,#163432,.T.); +#163432 = EDGE_CURVE('',#163425,#163433,#163435,.T.); +#163433 = VERTEX_POINT('',#163434); +#163434 = CARTESIAN_POINT('',(112.908066,-106.144551,1.585)); +#163435 = LINE('',#163436,#163437); +#163436 = CARTESIAN_POINT('',(112.909507,-105.728728,1.585)); +#163437 = VECTOR('',#163438,1.); +#163438 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#163439 = ORIENTED_EDGE('',*,*,#163440,.T.); +#163440 = EDGE_CURVE('',#163433,#163441,#163443,.T.); +#163441 = VERTEX_POINT('',#163442); +#163442 = CARTESIAN_POINT('',(112.759507,-106.129919,1.585)); +#163443 = CIRCLE('',#163444,7.500006711464E-02); +#163444 = AXIS2_PLACEMENT_3D('',#163445,#163446,#163447); +#163445 = CARTESIAN_POINT('',(112.83450706711,-106.1299190671,1.585)); +#163446 = DIRECTION('',(-0.,0.,-1.)); +#163447 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#163448 = ORIENTED_EDGE('',*,*,#163449,.T.); +#163449 = EDGE_CURVE('',#163441,#163380,#163450,.T.); +#163450 = LINE('',#163451,#163452); +#163451 = CARTESIAN_POINT('',(112.759507,-106.129919,1.585)); +#163452 = VECTOR('',#163453,1.); +#163453 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#163454 = FACE_BOUND('',#163455,.F.); +#163455 = EDGE_LOOP('',(#163456,#163467,#163475,#163483,#163491,#163500) + ); +#163456 = ORIENTED_EDGE('',*,*,#163457,.T.); +#163457 = EDGE_CURVE('',#163458,#163460,#163462,.T.); +#163458 = VERTEX_POINT('',#163459); +#163459 = CARTESIAN_POINT('',(113.330935,-105.3381,1.585)); +#163460 = VERTEX_POINT('',#163461); +#163461 = CARTESIAN_POINT('',(113.197754,-105.204919,1.585)); +#163462 = CIRCLE('',#163463,0.18686440374); +#163463 = AXIS2_PLACEMENT_3D('',#163464,#163465,#163466); +#163464 = CARTESIAN_POINT('',(113.150218,-105.385636,1.585)); +#163465 = DIRECTION('',(0.,0.,1.)); +#163466 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#163467 = ORIENTED_EDGE('',*,*,#163468,.T.); +#163468 = EDGE_CURVE('',#163460,#163469,#163471,.T.); +#163469 = VERTEX_POINT('',#163470); +#163470 = CARTESIAN_POINT('',(112.909507,-105.204919,1.585)); +#163471 = LINE('',#163472,#163473); +#163472 = CARTESIAN_POINT('',(113.197754,-105.204919,1.585)); +#163473 = VECTOR('',#163474,1.); +#163474 = DIRECTION('',(-1.,0.,0.)); +#163475 = ORIENTED_EDGE('',*,*,#163476,.T.); +#163476 = EDGE_CURVE('',#163469,#163477,#163479,.T.); +#163477 = VERTEX_POINT('',#163478); +#163478 = CARTESIAN_POINT('',(112.909507,-105.578728,1.585)); +#163479 = LINE('',#163480,#163481); +#163480 = CARTESIAN_POINT('',(112.909507,-105.204919,1.585)); +#163481 = VECTOR('',#163482,1.); +#163482 = DIRECTION('',(0.,-1.,0.)); +#163483 = ORIENTED_EDGE('',*,*,#163484,.T.); +#163484 = EDGE_CURVE('',#163477,#163485,#163487,.T.); +#163485 = VERTEX_POINT('',#163486); +#163486 = CARTESIAN_POINT('',(113.197754,-105.578728,1.585)); +#163487 = LINE('',#163488,#163489); +#163488 = CARTESIAN_POINT('',(112.909507,-105.578728,1.585)); +#163489 = VECTOR('',#163490,1.); +#163490 = DIRECTION('',(1.,0.,0.)); +#163491 = ORIENTED_EDGE('',*,*,#163492,.T.); +#163492 = EDGE_CURVE('',#163485,#163493,#163495,.T.); +#163493 = VERTEX_POINT('',#163494); +#163494 = CARTESIAN_POINT('',(113.330935,-105.445547,1.585)); +#163495 = CIRCLE('',#163496,0.18686440374); +#163496 = AXIS2_PLACEMENT_3D('',#163497,#163498,#163499); +#163497 = CARTESIAN_POINT('',(113.150218,-105.398011,1.585)); +#163498 = DIRECTION('',(0.,0.,1.)); +#163499 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#163500 = ORIENTED_EDGE('',*,*,#163501,.T.); +#163501 = EDGE_CURVE('',#163493,#163458,#163502,.T.); +#163502 = LINE('',#163503,#163504); +#163503 = CARTESIAN_POINT('',(113.330935,-105.445547,1.585)); +#163504 = VECTOR('',#163505,1.); +#163505 = DIRECTION('',(0.,1.,0.)); +#163506 = PLANE('',#163507); +#163507 = AXIS2_PLACEMENT_3D('',#163508,#163509,#163510); +#163508 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163509 = DIRECTION('',(0.,0.,1.)); +#163510 = DIRECTION('',(1.,0.,-0.)); +#163511 = SHELL_BASED_SURFACE_MODEL('',(#163512)); +#163512 = OPEN_SHELL('',(#163513)); +#163513 = ADVANCED_FACE('',(#163514),#163574,.T.); +#163514 = FACE_BOUND('',#163515,.F.); +#163515 = EDGE_LOOP('',(#163516,#163527,#163535,#163543,#163551,#163559, + #163568)); +#163516 = ORIENTED_EDGE('',*,*,#163517,.T.); +#163517 = EDGE_CURVE('',#163518,#163520,#163522,.T.); +#163518 = VERTEX_POINT('',#163519); +#163519 = CARTESIAN_POINT('',(91.21415,-105.8331,1.585)); +#163520 = VERTEX_POINT('',#163521); +#163521 = CARTESIAN_POINT('',(91.165626,-105.73781,1.585)); +#163522 = CIRCLE('',#163523,6.000027696174E-02); +#163523 = AXIS2_PLACEMENT_3D('',#163524,#163525,#163526); +#163524 = CARTESIAN_POINT('',(91.214150928468,-105.773099723,1.585)); +#163525 = DIRECTION('',(0.,0.,-1.)); +#163526 = DIRECTION('',(-1.547440135436E-05,-0.99999999988,-0.)); +#163527 = ORIENTED_EDGE('',*,*,#163528,.T.); +#163528 = EDGE_CURVE('',#163520,#163529,#163531,.T.); +#163529 = VERTEX_POINT('',#163530); +#163530 = CARTESIAN_POINT('',(91.405626,-105.40781,1.585)); +#163531 = LINE('',#163532,#163533); +#163532 = CARTESIAN_POINT('',(91.165626,-105.73781,1.585)); +#163533 = VECTOR('',#163534,1.); +#163534 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#163535 = ORIENTED_EDGE('',*,*,#163536,.T.); +#163536 = EDGE_CURVE('',#163529,#163537,#163539,.T.); +#163537 = VERTEX_POINT('',#163538); +#163538 = CARTESIAN_POINT('',(91.444792,-105.383834,1.585)); +#163539 = LINE('',#163540,#163541); +#163540 = CARTESIAN_POINT('',(91.405626,-105.40781,1.585)); +#163541 = VECTOR('',#163542,1.); +#163542 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#163543 = ORIENTED_EDGE('',*,*,#163544,.T.); +#163544 = EDGE_CURVE('',#163537,#163545,#163547,.T.); +#163545 = VERTEX_POINT('',#163546); +#163546 = CARTESIAN_POINT('',(91.48944,-105.394576,1.585)); +#163547 = LINE('',#163548,#163549); +#163548 = CARTESIAN_POINT('',(91.444792,-105.383834,1.585)); +#163549 = VECTOR('',#163550,1.); +#163550 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#163551 = ORIENTED_EDGE('',*,*,#163552,.T.); +#163552 = EDGE_CURVE('',#163545,#163553,#163555,.T.); +#163553 = VERTEX_POINT('',#163554); +#163554 = CARTESIAN_POINT('',(91.742674,-105.73781,1.585)); +#163555 = LINE('',#163556,#163557); +#163556 = CARTESIAN_POINT('',(91.48944,-105.394576,1.585)); +#163557 = VECTOR('',#163558,1.); +#163558 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#163559 = ORIENTED_EDGE('',*,*,#163560,.T.); +#163560 = EDGE_CURVE('',#163553,#163561,#163563,.T.); +#163561 = VERTEX_POINT('',#163562); +#163562 = CARTESIAN_POINT('',(91.69415,-105.8331,1.585)); +#163563 = CIRCLE('',#163564,5.999941814204E-02); +#163564 = AXIS2_PLACEMENT_3D('',#163565,#163566,#163567); +#163565 = CARTESIAN_POINT('',(91.694150758052,-105.7731005818,1.585)); +#163566 = DIRECTION('',(0.,0.,-1.)); +#163567 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#163568 = ORIENTED_EDGE('',*,*,#163569,.T.); +#163569 = EDGE_CURVE('',#163561,#163518,#163570,.T.); +#163570 = LINE('',#163571,#163572); +#163571 = CARTESIAN_POINT('',(91.69415,-105.8331,1.585)); +#163572 = VECTOR('',#163573,1.); +#163573 = DIRECTION('',(-1.,0.,0.)); +#163574 = PLANE('',#163575); +#163575 = AXIS2_PLACEMENT_3D('',#163576,#163577,#163578); +#163576 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163577 = DIRECTION('',(0.,0.,1.)); +#163578 = DIRECTION('',(1.,0.,-0.)); +#163579 = SHELL_BASED_SURFACE_MODEL('',(#163580)); +#163580 = OPEN_SHELL('',(#163581)); +#163581 = ADVANCED_FACE('',(#163582),#163618,.T.); +#163582 = FACE_BOUND('',#163583,.F.); +#163583 = EDGE_LOOP('',(#163584,#163595,#163603,#163612)); +#163584 = ORIENTED_EDGE('',*,*,#163585,.T.); +#163585 = EDGE_CURVE('',#163586,#163588,#163590,.T.); +#163586 = VERTEX_POINT('',#163587); +#163587 = CARTESIAN_POINT('',(119.955398,-105.7431,1.585)); +#163588 = VERTEX_POINT('',#163589); +#163589 = CARTESIAN_POINT('',(119.955398,-105.6231,1.585)); +#163590 = CIRCLE('',#163591,6.000000000043E-02); +#163591 = AXIS2_PLACEMENT_3D('',#163592,#163593,#163594); +#163592 = CARTESIAN_POINT('',(119.95539777441,-105.6831,1.585)); +#163593 = DIRECTION('',(0.,0.,-1.)); +#163594 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#163595 = ORIENTED_EDGE('',*,*,#163596,.T.); +#163596 = EDGE_CURVE('',#163588,#163597,#163599,.T.); +#163597 = VERTEX_POINT('',#163598); +#163598 = CARTESIAN_POINT('',(121.377902,-105.6231,1.585)); +#163599 = LINE('',#163600,#163601); +#163600 = CARTESIAN_POINT('',(119.955398,-105.6231,1.585)); +#163601 = VECTOR('',#163602,1.); +#163602 = DIRECTION('',(1.,0.,0.)); +#163603 = ORIENTED_EDGE('',*,*,#163604,.T.); +#163604 = EDGE_CURVE('',#163597,#163605,#163607,.T.); +#163605 = VERTEX_POINT('',#163606); +#163606 = CARTESIAN_POINT('',(121.377902,-105.7431,1.585)); +#163607 = CIRCLE('',#163608,6.000000000042E-02); +#163608 = AXIS2_PLACEMENT_3D('',#163609,#163610,#163611); +#163609 = CARTESIAN_POINT('',(121.37790222558,-105.6831,1.585)); +#163610 = DIRECTION('',(0.,0.,-1.)); +#163611 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#163612 = ORIENTED_EDGE('',*,*,#163613,.T.); +#163613 = EDGE_CURVE('',#163605,#163586,#163614,.T.); +#163614 = LINE('',#163615,#163616); +#163615 = CARTESIAN_POINT('',(121.377902,-105.7431,1.585)); +#163616 = VECTOR('',#163617,1.); +#163617 = DIRECTION('',(-1.,0.,0.)); +#163618 = PLANE('',#163619); +#163619 = AXIS2_PLACEMENT_3D('',#163620,#163621,#163622); +#163620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163621 = DIRECTION('',(0.,0.,1.)); +#163622 = DIRECTION('',(1.,0.,-0.)); +#163623 = SHELL_BASED_SURFACE_MODEL('',(#163624)); +#163624 = OPEN_SHELL('',(#163625)); +#163625 = ADVANCED_FACE('',(#163626),#163662,.T.); +#163626 = FACE_BOUND('',#163627,.F.); +#163627 = EDGE_LOOP('',(#163628,#163639,#163647,#163656)); +#163628 = ORIENTED_EDGE('',*,*,#163629,.T.); +#163629 = EDGE_CURVE('',#163630,#163632,#163634,.T.); +#163630 = VERTEX_POINT('',#163631); +#163631 = CARTESIAN_POINT('',(125.455398,-105.7431,1.585)); +#163632 = VERTEX_POINT('',#163633); +#163633 = CARTESIAN_POINT('',(125.455398,-105.6231,1.585)); +#163634 = CIRCLE('',#163635,6.000000000043E-02); +#163635 = AXIS2_PLACEMENT_3D('',#163636,#163637,#163638); +#163636 = CARTESIAN_POINT('',(125.45539777441,-105.6831,1.585)); +#163637 = DIRECTION('',(0.,0.,-1.)); +#163638 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#163639 = ORIENTED_EDGE('',*,*,#163640,.T.); +#163640 = EDGE_CURVE('',#163632,#163641,#163643,.T.); +#163641 = VERTEX_POINT('',#163642); +#163642 = CARTESIAN_POINT('',(126.877902,-105.6231,1.585)); +#163643 = LINE('',#163644,#163645); +#163644 = CARTESIAN_POINT('',(125.455398,-105.6231,1.585)); +#163645 = VECTOR('',#163646,1.); +#163646 = DIRECTION('',(1.,0.,0.)); +#163647 = ORIENTED_EDGE('',*,*,#163648,.T.); +#163648 = EDGE_CURVE('',#163641,#163649,#163651,.T.); +#163649 = VERTEX_POINT('',#163650); +#163650 = CARTESIAN_POINT('',(126.877902,-105.7431,1.585)); +#163651 = CIRCLE('',#163652,6.000000000042E-02); +#163652 = AXIS2_PLACEMENT_3D('',#163653,#163654,#163655); +#163653 = CARTESIAN_POINT('',(126.87790222558,-105.6831,1.585)); +#163654 = DIRECTION('',(0.,0.,-1.)); +#163655 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#163656 = ORIENTED_EDGE('',*,*,#163657,.T.); +#163657 = EDGE_CURVE('',#163649,#163630,#163658,.T.); +#163658 = LINE('',#163659,#163660); +#163659 = CARTESIAN_POINT('',(126.877902,-105.7431,1.585)); +#163660 = VECTOR('',#163661,1.); +#163661 = DIRECTION('',(-1.,0.,0.)); +#163662 = PLANE('',#163663); +#163663 = AXIS2_PLACEMENT_3D('',#163664,#163665,#163666); +#163664 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163665 = DIRECTION('',(0.,0.,1.)); +#163666 = DIRECTION('',(1.,0.,-0.)); +#163667 = SHELL_BASED_SURFACE_MODEL('',(#163668)); +#163668 = OPEN_SHELL('',(#163669)); +#163669 = ADVANCED_FACE('',(#163670),#163813,.T.); +#163670 = FACE_BOUND('',#163671,.F.); +#163671 = EDGE_LOOP('',(#163672,#163683,#163691,#163699,#163708,#163716, + #163724,#163733,#163741,#163750,#163758,#163766,#163774,#163783, + #163791,#163799,#163807)); +#163672 = ORIENTED_EDGE('',*,*,#163673,.T.); +#163673 = EDGE_CURVE('',#163674,#163676,#163678,.T.); +#163674 = VERTEX_POINT('',#163675); +#163675 = CARTESIAN_POINT('',(206.721467,-104.927406,1.585)); +#163676 = VERTEX_POINT('',#163677); +#163677 = CARTESIAN_POINT('',(206.838135,-104.989766,1.585)); +#163678 = CIRCLE('',#163679,7.500000000003E-02); +#163679 = AXIS2_PLACEMENT_3D('',#163680,#163681,#163682); +#163680 = CARTESIAN_POINT('',(206.763135,-104.9897660655,1.585)); +#163681 = DIRECTION('',(0.,0.,-1.)); +#163682 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#163683 = ORIENTED_EDGE('',*,*,#163684,.T.); +#163684 = EDGE_CURVE('',#163676,#163685,#163687,.T.); +#163685 = VERTEX_POINT('',#163686); +#163686 = CARTESIAN_POINT('',(206.838135,-105.057623,1.585)); +#163687 = LINE('',#163688,#163689); +#163688 = CARTESIAN_POINT('',(206.838135,-104.989766,1.585)); +#163689 = VECTOR('',#163690,1.); +#163690 = DIRECTION('',(0.,-1.,0.)); +#163691 = ORIENTED_EDGE('',*,*,#163692,.T.); +#163692 = EDGE_CURVE('',#163685,#163693,#163695,.T.); +#163693 = VERTEX_POINT('',#163694); +#163694 = CARTESIAN_POINT('',(207.111101,-105.059064,1.585)); +#163695 = LINE('',#163696,#163697); +#163696 = CARTESIAN_POINT('',(206.838135,-105.057623,1.585)); +#163697 = VECTOR('',#163698,1.); +#163698 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#163699 = ORIENTED_EDGE('',*,*,#163700,.T.); +#163700 = EDGE_CURVE('',#163693,#163701,#163703,.T.); +#163701 = VERTEX_POINT('',#163702); +#163702 = CARTESIAN_POINT('',(207.096469,-105.207623,1.585)); +#163703 = CIRCLE('',#163704,7.500006711463E-02); +#163704 = AXIS2_PLACEMENT_3D('',#163705,#163706,#163707); +#163705 = CARTESIAN_POINT('',(207.09646906711,-105.1326229328,1.585)); +#163706 = DIRECTION('',(0.,0.,-1.)); +#163707 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#163708 = ORIENTED_EDGE('',*,*,#163709,.T.); +#163709 = EDGE_CURVE('',#163701,#163710,#163712,.T.); +#163710 = VERTEX_POINT('',#163711); +#163711 = CARTESIAN_POINT('',(206.838135,-105.207623,1.585)); +#163712 = LINE('',#163713,#163714); +#163713 = CARTESIAN_POINT('',(207.096469,-105.207623,1.585)); +#163714 = VECTOR('',#163715,1.); +#163715 = DIRECTION('',(-1.,0.,0.)); +#163716 = ORIENTED_EDGE('',*,*,#163717,.T.); +#163717 = EDGE_CURVE('',#163710,#163718,#163720,.T.); +#163718 = VERTEX_POINT('',#163719); +#163719 = CARTESIAN_POINT('',(206.836694,-105.623445,1.585)); +#163720 = LINE('',#163721,#163722); +#163721 = CARTESIAN_POINT('',(206.838135,-105.207623,1.585)); +#163722 = VECTOR('',#163723,1.); +#163723 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#163724 = ORIENTED_EDGE('',*,*,#163725,.T.); +#163725 = EDGE_CURVE('',#163718,#163726,#163728,.T.); +#163726 = VERTEX_POINT('',#163727); +#163727 = CARTESIAN_POINT('',(206.739417,-105.679964,1.585)); +#163728 = CIRCLE('',#163729,7.500041328201E-02); +#163729 = AXIS2_PLACEMENT_3D('',#163730,#163731,#163732); +#163730 = CARTESIAN_POINT('',(206.76313481481,-105.6088125611,1.585)); +#163731 = DIRECTION('',(0.,0.,-1.)); +#163732 = DIRECTION('',(0.980783731279,-0.195098109828,0.)); +#163733 = ORIENTED_EDGE('',*,*,#163734,.T.); +#163734 = EDGE_CURVE('',#163726,#163735,#163737,.T.); +#163735 = VERTEX_POINT('',#163736); +#163736 = CARTESIAN_POINT('',(206.011707,-105.435875,1.585)); +#163737 = LINE('',#163738,#163739); +#163738 = CARTESIAN_POINT('',(206.739417,-105.679964,1.585)); +#163739 = VECTOR('',#163740,1.); +#163740 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#163741 = ORIENTED_EDGE('',*,*,#163742,.T.); +#163742 = EDGE_CURVE('',#163735,#163743,#163745,.T.); +#163743 = VERTEX_POINT('',#163744); +#163744 = CARTESIAN_POINT('',(206.072567,-105.299567,1.585)); +#163745 = CIRCLE('',#163746,7.50000151955E-02); +#163746 = AXIS2_PLACEMENT_3D('',#163747,#163748,#163749); +#163747 = CARTESIAN_POINT('',(206.04885009996,-105.3707183241,1.585)); +#163748 = DIRECTION('',(0.,0.,-1.)); +#163749 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#163750 = ORIENTED_EDGE('',*,*,#163751,.T.); +#163751 = EDGE_CURVE('',#163743,#163752,#163754,.T.); +#163752 = VERTEX_POINT('',#163753); +#163753 = CARTESIAN_POINT('',(206.688135,-105.504756,1.585)); +#163754 = LINE('',#163755,#163756); +#163755 = CARTESIAN_POINT('',(206.072567,-105.299567,1.585)); +#163756 = VECTOR('',#163757,1.); +#163757 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#163758 = ORIENTED_EDGE('',*,*,#163759,.T.); +#163759 = EDGE_CURVE('',#163752,#163760,#163762,.T.); +#163760 = VERTEX_POINT('',#163761); +#163761 = CARTESIAN_POINT('',(206.688135,-105.207623,1.585)); +#163762 = LINE('',#163763,#163764); +#163763 = CARTESIAN_POINT('',(206.688135,-105.504756,1.585)); +#163764 = VECTOR('',#163765,1.); +#163765 = DIRECTION('',(0.,1.,0.)); +#163766 = ORIENTED_EDGE('',*,*,#163767,.T.); +#163767 = EDGE_CURVE('',#163760,#163768,#163770,.T.); +#163768 = VERTEX_POINT('',#163769); +#163769 = CARTESIAN_POINT('',(206.41517,-105.206182,1.585)); +#163770 = LINE('',#163771,#163772); +#163771 = CARTESIAN_POINT('',(206.688135,-105.207623,1.585)); +#163772 = VECTOR('',#163773,1.); +#163773 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#163774 = ORIENTED_EDGE('',*,*,#163775,.T.); +#163775 = EDGE_CURVE('',#163768,#163776,#163778,.T.); +#163776 = VERTEX_POINT('',#163777); +#163777 = CARTESIAN_POINT('',(206.429802,-105.057623,1.585)); +#163778 = CIRCLE('',#163779,7.500006711464E-02); +#163779 = AXIS2_PLACEMENT_3D('',#163780,#163781,#163782); +#163780 = CARTESIAN_POINT('',(206.42980193288,-105.1326230671,1.585)); +#163781 = DIRECTION('',(0.,0.,-1.)); +#163782 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#163783 = ORIENTED_EDGE('',*,*,#163784,.T.); +#163784 = EDGE_CURVE('',#163776,#163785,#163787,.T.); +#163785 = VERTEX_POINT('',#163786); +#163786 = CARTESIAN_POINT('',(206.688135,-105.057623,1.585)); +#163787 = LINE('',#163788,#163789); +#163788 = CARTESIAN_POINT('',(206.429802,-105.057623,1.585)); +#163789 = VECTOR('',#163790,1.); +#163790 = DIRECTION('',(1.,0.,0.)); +#163791 = ORIENTED_EDGE('',*,*,#163792,.T.); +#163792 = EDGE_CURVE('',#163785,#163793,#163795,.T.); +#163793 = VERTEX_POINT('',#163794); +#163794 = CARTESIAN_POINT('',(206.689576,-104.975134,1.585)); +#163795 = LINE('',#163796,#163797); +#163796 = CARTESIAN_POINT('',(206.688135,-105.057623,1.585)); +#163797 = VECTOR('',#163798,1.); +#163798 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#163799 = ORIENTED_EDGE('',*,*,#163800,.T.); +#163800 = EDGE_CURVE('',#163793,#163801,#163803,.T.); +#163801 = VERTEX_POINT('',#163802); +#163802 = CARTESIAN_POINT('',(206.700775,-104.948098,1.585)); +#163803 = LINE('',#163804,#163805); +#163804 = CARTESIAN_POINT('',(206.689576,-104.975134,1.585)); +#163805 = VECTOR('',#163806,1.); +#163806 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#163807 = ORIENTED_EDGE('',*,*,#163808,.T.); +#163808 = EDGE_CURVE('',#163801,#163674,#163809,.T.); +#163809 = LINE('',#163810,#163811); +#163810 = CARTESIAN_POINT('',(206.700775,-104.948098,1.585)); +#163811 = VECTOR('',#163812,1.); +#163812 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163813 = PLANE('',#163814); +#163814 = AXIS2_PLACEMENT_3D('',#163815,#163816,#163817); +#163815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163816 = DIRECTION('',(0.,0.,1.)); +#163817 = DIRECTION('',(1.,0.,-0.)); +#163818 = SHELL_BASED_SURFACE_MODEL('',(#163819)); +#163819 = OPEN_SHELL('',(#163820)); +#163820 = ADVANCED_FACE('',(#163821),#163948,.T.); +#163821 = FACE_BOUND('',#163822,.F.); +#163822 = EDGE_LOOP('',(#163823,#163834,#163842,#163851,#163859,#163868, + #163876,#163884,#163892,#163900,#163908,#163916,#163925,#163933, + #163942)); +#163823 = ORIENTED_EDGE('',*,*,#163824,.T.); +#163824 = EDGE_CURVE('',#163825,#163827,#163829,.T.); +#163825 = VERTEX_POINT('',#163826); +#163826 = CARTESIAN_POINT('',(184.92165,-102.1731,1.585)); +#163827 = VERTEX_POINT('',#163828); +#163828 = CARTESIAN_POINT('',(184.98165,-102.1131,1.585)); +#163829 = CIRCLE('',#163830,5.999932016262E-02); +#163830 = AXIS2_PLACEMENT_3D('',#163831,#163832,#163833); +#163831 = CARTESIAN_POINT('',(184.98164932015,-102.1730993201,1.585)); +#163832 = DIRECTION('',(0.,0.,-1.)); +#163833 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#163834 = ORIENTED_EDGE('',*,*,#163835,.T.); +#163835 = EDGE_CURVE('',#163827,#163836,#163838,.T.); +#163836 = VERTEX_POINT('',#163837); +#163837 = CARTESIAN_POINT('',(190.49165,-102.1131,1.585)); +#163838 = LINE('',#163839,#163840); +#163839 = CARTESIAN_POINT('',(184.98165,-102.1131,1.585)); +#163840 = VECTOR('',#163841,1.); +#163841 = DIRECTION('',(1.,0.,0.)); +#163842 = ORIENTED_EDGE('',*,*,#163843,.T.); +#163843 = EDGE_CURVE('',#163836,#163844,#163846,.T.); +#163844 = VERTEX_POINT('',#163845); +#163845 = CARTESIAN_POINT('',(190.49165,-102.2331,1.585)); +#163846 = CIRCLE('',#163847,6.000000000042E-02); +#163847 = AXIS2_PLACEMENT_3D('',#163848,#163849,#163850); +#163848 = CARTESIAN_POINT('',(190.49165022558,-102.1731,1.585)); +#163849 = DIRECTION('',(0.,0.,-1.)); +#163850 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#163851 = ORIENTED_EDGE('',*,*,#163852,.T.); +#163852 = EDGE_CURVE('',#163844,#163853,#163855,.T.); +#163853 = VERTEX_POINT('',#163854); +#163854 = CARTESIAN_POINT('',(188.787806,-102.2331,1.585)); +#163855 = LINE('',#163856,#163857); +#163856 = CARTESIAN_POINT('',(190.49165,-102.2331,1.585)); +#163857 = VECTOR('',#163858,1.); +#163858 = DIRECTION('',(-1.,0.,0.)); +#163859 = ORIENTED_EDGE('',*,*,#163860,.T.); +#163860 = EDGE_CURVE('',#163853,#163861,#163863,.T.); +#163861 = VERTEX_POINT('',#163862); +#163862 = CARTESIAN_POINT('',(188.66975,-102.1731,1.585)); +#163863 = CIRCLE('',#163864,0.140464469153); +#163864 = AXIS2_PLACEMENT_3D('',#163865,#163866,#163867); +#163865 = CARTESIAN_POINT('',(188.67265150144,-102.3135344985,1.585)); +#163866 = DIRECTION('',(0.,0.,1.)); +#163867 = DIRECTION('',(0.819812293082,0.572632346372,-0.)); +#163868 = ORIENTED_EDGE('',*,*,#163869,.T.); +#163869 = EDGE_CURVE('',#163861,#163870,#163872,.T.); +#163870 = VERTEX_POINT('',#163871); +#163871 = CARTESIAN_POINT('',(188.640486,-102.175982,1.585)); +#163872 = LINE('',#163873,#163874); +#163873 = CARTESIAN_POINT('',(188.66975,-102.1731,1.585)); +#163874 = VECTOR('',#163875,1.); +#163875 = DIRECTION('',(-0.995185563998,-9.800863844463E-02,0.)); +#163876 = ORIENTED_EDGE('',*,*,#163877,.T.); +#163877 = EDGE_CURVE('',#163870,#163878,#163880,.T.); +#163878 = VERTEX_POINT('',#163879); +#163879 = CARTESIAN_POINT('',(188.586414,-102.19838,1.585)); +#163880 = LINE('',#163881,#163882); +#163881 = CARTESIAN_POINT('',(188.640486,-102.175982,1.585)); +#163882 = VECTOR('',#163883,1.); +#163883 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#163884 = ORIENTED_EDGE('',*,*,#163885,.T.); +#163885 = EDGE_CURVE('',#163878,#163886,#163888,.T.); +#163886 = VERTEX_POINT('',#163887); +#163887 = CARTESIAN_POINT('',(188.551694,-102.2331,1.585)); +#163888 = LINE('',#163889,#163890); +#163889 = CARTESIAN_POINT('',(188.586414,-102.19838,1.585)); +#163890 = VECTOR('',#163891,1.); +#163891 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#163892 = ORIENTED_EDGE('',*,*,#163893,.T.); +#163893 = EDGE_CURVE('',#163886,#163894,#163896,.T.); +#163894 = VERTEX_POINT('',#163895); +#163895 = CARTESIAN_POINT('',(185.04165,-102.2331,1.585)); +#163896 = LINE('',#163897,#163898); +#163897 = CARTESIAN_POINT('',(188.551694,-102.2331,1.585)); +#163898 = VECTOR('',#163899,1.); +#163899 = DIRECTION('',(-1.,0.,0.)); +#163900 = ORIENTED_EDGE('',*,*,#163901,.T.); +#163901 = EDGE_CURVE('',#163894,#163902,#163904,.T.); +#163902 = VERTEX_POINT('',#163903); +#163903 = CARTESIAN_POINT('',(185.04165,-105.4131,1.585)); +#163904 = LINE('',#163905,#163906); +#163905 = CARTESIAN_POINT('',(185.04165,-102.2331,1.585)); +#163906 = VECTOR('',#163907,1.); +#163907 = DIRECTION('',(0.,-1.,0.)); +#163908 = ORIENTED_EDGE('',*,*,#163909,.T.); +#163909 = EDGE_CURVE('',#163902,#163910,#163912,.T.); +#163910 = VERTEX_POINT('',#163911); +#163911 = CARTESIAN_POINT('',(190.49165,-105.4131,1.585)); +#163912 = LINE('',#163913,#163914); +#163913 = CARTESIAN_POINT('',(185.04165,-105.4131,1.585)); +#163914 = VECTOR('',#163915,1.); +#163915 = DIRECTION('',(1.,0.,0.)); +#163916 = ORIENTED_EDGE('',*,*,#163917,.T.); +#163917 = EDGE_CURVE('',#163910,#163918,#163920,.T.); +#163918 = VERTEX_POINT('',#163919); +#163919 = CARTESIAN_POINT('',(190.49165,-105.5331,1.585)); +#163920 = CIRCLE('',#163921,6.000000000042E-02); +#163921 = AXIS2_PLACEMENT_3D('',#163922,#163923,#163924); +#163922 = CARTESIAN_POINT('',(190.49165022558,-105.4731,1.585)); +#163923 = DIRECTION('',(0.,0.,-1.)); +#163924 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#163925 = ORIENTED_EDGE('',*,*,#163926,.T.); +#163926 = EDGE_CURVE('',#163918,#163927,#163929,.T.); +#163927 = VERTEX_POINT('',#163928); +#163928 = CARTESIAN_POINT('',(184.98165,-105.5331,1.585)); +#163929 = LINE('',#163930,#163931); +#163930 = CARTESIAN_POINT('',(190.49165,-105.5331,1.585)); +#163931 = VECTOR('',#163932,1.); +#163932 = DIRECTION('',(-1.,0.,0.)); +#163933 = ORIENTED_EDGE('',*,*,#163934,.T.); +#163934 = EDGE_CURVE('',#163927,#163935,#163937,.T.); +#163935 = VERTEX_POINT('',#163936); +#163936 = CARTESIAN_POINT('',(184.92165,-105.4731,1.585)); +#163937 = CIRCLE('',#163938,5.999932016262E-02); +#163938 = AXIS2_PLACEMENT_3D('',#163939,#163940,#163941); +#163939 = CARTESIAN_POINT('',(184.98164932015,-105.4731006798,1.585)); +#163940 = DIRECTION('',(0.,0.,-1.)); +#163941 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#163942 = ORIENTED_EDGE('',*,*,#163943,.T.); +#163943 = EDGE_CURVE('',#163935,#163825,#163944,.T.); +#163944 = LINE('',#163945,#163946); +#163945 = CARTESIAN_POINT('',(184.92165,-105.4731,1.585)); +#163946 = VECTOR('',#163947,1.); +#163947 = DIRECTION('',(0.,1.,0.)); +#163948 = PLANE('',#163949); +#163949 = AXIS2_PLACEMENT_3D('',#163950,#163951,#163952); +#163950 = CARTESIAN_POINT('',(0.,0.,1.585)); +#163951 = DIRECTION('',(0.,0.,1.)); +#163952 = DIRECTION('',(1.,0.,-0.)); +#163953 = SHELL_BASED_SURFACE_MODEL('',(#163954)); +#163954 = OPEN_SHELL('',(#163955)); +#163955 = ADVANCED_FACE('',(#163956),#164042,.T.); +#163956 = FACE_BOUND('',#163957,.F.); +#163957 = EDGE_LOOP('',(#163958,#163969,#163977,#163986,#163994,#164003, + #164011,#164019,#164027,#164036)); +#163958 = ORIENTED_EDGE('',*,*,#163959,.T.); +#163959 = EDGE_CURVE('',#163960,#163962,#163964,.T.); +#163960 = VERTEX_POINT('',#163961); +#163961 = CARTESIAN_POINT('',(91.93415,-104.2631,1.585)); +#163962 = VERTEX_POINT('',#163963); +#163963 = CARTESIAN_POINT('',(91.99415,-104.2031,1.585)); +#163964 = CIRCLE('',#163965,5.999932016258E-02); +#163965 = AXIS2_PLACEMENT_3D('',#163966,#163967,#163968); +#163966 = CARTESIAN_POINT('',(91.994149320159,-104.2630993201,1.585)); +#163967 = DIRECTION('',(0.,0.,-1.)); +#163968 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#163969 = ORIENTED_EDGE('',*,*,#163970,.T.); +#163970 = EDGE_CURVE('',#163962,#163971,#163973,.T.); +#163971 = VERTEX_POINT('',#163972); +#163972 = CARTESIAN_POINT('',(93.51415,-104.2031,1.585)); +#163973 = LINE('',#163974,#163975); +#163974 = CARTESIAN_POINT('',(91.99415,-104.2031,1.585)); +#163975 = VECTOR('',#163976,1.); +#163976 = DIRECTION('',(1.,0.,0.)); +#163977 = ORIENTED_EDGE('',*,*,#163978,.T.); +#163978 = EDGE_CURVE('',#163971,#163979,#163981,.T.); +#163979 = VERTEX_POINT('',#163980); +#163980 = CARTESIAN_POINT('',(93.57415,-104.2631,1.585)); +#163981 = CIRCLE('',#163982,5.999932016258E-02); +#163982 = AXIS2_PLACEMENT_3D('',#163983,#163984,#163985); +#163983 = CARTESIAN_POINT('',(93.514150679841,-104.2630993201,1.585)); +#163984 = DIRECTION('',(0.,0.,-1.)); +#163985 = DIRECTION('',(-1.133081635828E-05,0.999999999936,0.)); +#163986 = ORIENTED_EDGE('',*,*,#163987,.T.); +#163987 = EDGE_CURVE('',#163979,#163988,#163990,.T.); +#163988 = VERTEX_POINT('',#163989); +#163989 = CARTESIAN_POINT('',(93.57415,-105.2631,1.585)); +#163990 = LINE('',#163991,#163992); +#163991 = CARTESIAN_POINT('',(93.57415,-104.2631,1.585)); +#163992 = VECTOR('',#163993,1.); +#163993 = DIRECTION('',(0.,-1.,0.)); +#163994 = ORIENTED_EDGE('',*,*,#163995,.T.); +#163995 = EDGE_CURVE('',#163988,#163996,#163998,.T.); +#163996 = VERTEX_POINT('',#163997); +#163997 = CARTESIAN_POINT('',(93.45415,-105.2631,1.585)); +#163998 = CIRCLE('',#163999,6.000000000042E-02); +#163999 = AXIS2_PLACEMENT_3D('',#164000,#164001,#164002); +#164000 = CARTESIAN_POINT('',(93.51415,-105.2631002255,1.585)); +#164001 = DIRECTION('',(0.,0.,-1.)); +#164002 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#164003 = ORIENTED_EDGE('',*,*,#164004,.T.); +#164004 = EDGE_CURVE('',#163996,#164005,#164007,.T.); +#164005 = VERTEX_POINT('',#164006); +#164006 = CARTESIAN_POINT('',(93.45415,-104.3231,1.585)); +#164007 = LINE('',#164008,#164009); +#164008 = CARTESIAN_POINT('',(93.45415,-105.2631,1.585)); +#164009 = VECTOR('',#164010,1.); +#164010 = DIRECTION('',(0.,1.,0.)); +#164011 = ORIENTED_EDGE('',*,*,#164012,.T.); +#164012 = EDGE_CURVE('',#164005,#164013,#164015,.T.); +#164013 = VERTEX_POINT('',#164014); +#164014 = CARTESIAN_POINT('',(92.052161,-104.3231,1.585)); +#164015 = LINE('',#164016,#164017); +#164016 = CARTESIAN_POINT('',(93.45415,-104.3231,1.585)); +#164017 = VECTOR('',#164018,1.); +#164018 = DIRECTION('',(-1.,0.,0.)); +#164019 = ORIENTED_EDGE('',*,*,#164020,.T.); +#164020 = EDGE_CURVE('',#164013,#164021,#164023,.T.); +#164021 = VERTEX_POINT('',#164022); +#164022 = CARTESIAN_POINT('',(92.049583,-104.336061,1.585)); +#164023 = LINE('',#164024,#164025); +#164024 = CARTESIAN_POINT('',(92.052161,-104.3231,1.585)); +#164025 = VECTOR('',#164026,1.); +#164026 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#164027 = ORIENTED_EDGE('',*,*,#164028,.T.); +#164028 = EDGE_CURVE('',#164021,#164029,#164031,.T.); +#164029 = VERTEX_POINT('',#164030); +#164030 = CARTESIAN_POINT('',(91.93415,-104.3131,1.585)); +#164031 = CIRCLE('',#164032,6.000007318647E-02); +#164032 = AXIS2_PLACEMENT_3D('',#164033,#164034,#164035); +#164033 = CARTESIAN_POINT('',(91.994150073186,-104.3131001766,1.585)); +#164034 = DIRECTION('',(-0.,0.,-1.)); +#164035 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#164036 = ORIENTED_EDGE('',*,*,#164037,.T.); +#164037 = EDGE_CURVE('',#164029,#163960,#164038,.T.); +#164038 = LINE('',#164039,#164040); +#164039 = CARTESIAN_POINT('',(91.93415,-104.3131,1.585)); +#164040 = VECTOR('',#164041,1.); +#164041 = DIRECTION('',(0.,1.,0.)); +#164042 = PLANE('',#164043); +#164043 = AXIS2_PLACEMENT_3D('',#164044,#164045,#164046); +#164044 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164045 = DIRECTION('',(0.,0.,1.)); +#164046 = DIRECTION('',(1.,0.,-0.)); +#164047 = SHELL_BASED_SURFACE_MODEL('',(#164048)); +#164048 = OPEN_SHELL('',(#164049)); +#164049 = ADVANCED_FACE('',(#164050),#164086,.T.); +#164050 = FACE_BOUND('',#164051,.F.); +#164051 = EDGE_LOOP('',(#164052,#164063,#164071,#164080)); +#164052 = ORIENTED_EDGE('',*,*,#164053,.T.); +#164053 = EDGE_CURVE('',#164054,#164056,#164058,.T.); +#164054 = VERTEX_POINT('',#164055); +#164055 = CARTESIAN_POINT('',(130.730398,-105.1181,1.585)); +#164056 = VERTEX_POINT('',#164057); +#164057 = CARTESIAN_POINT('',(130.730398,-104.9981,1.585)); +#164058 = CIRCLE('',#164059,6.000000000042E-02); +#164059 = AXIS2_PLACEMENT_3D('',#164060,#164061,#164062); +#164060 = CARTESIAN_POINT('',(130.73039777441,-105.0581,1.585)); +#164061 = DIRECTION('',(0.,0.,-1.)); +#164062 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#164063 = ORIENTED_EDGE('',*,*,#164064,.T.); +#164064 = EDGE_CURVE('',#164056,#164065,#164067,.T.); +#164065 = VERTEX_POINT('',#164066); +#164066 = CARTESIAN_POINT('',(131.252902,-104.9981,1.585)); +#164067 = LINE('',#164068,#164069); +#164068 = CARTESIAN_POINT('',(130.730398,-104.9981,1.585)); +#164069 = VECTOR('',#164070,1.); +#164070 = DIRECTION('',(1.,0.,0.)); +#164071 = ORIENTED_EDGE('',*,*,#164072,.T.); +#164072 = EDGE_CURVE('',#164065,#164073,#164075,.T.); +#164073 = VERTEX_POINT('',#164074); +#164074 = CARTESIAN_POINT('',(131.252902,-105.1181,1.585)); +#164075 = CIRCLE('',#164076,6.000000000043E-02); +#164076 = AXIS2_PLACEMENT_3D('',#164077,#164078,#164079); +#164077 = CARTESIAN_POINT('',(131.25290222558,-105.0581,1.585)); +#164078 = DIRECTION('',(0.,0.,-1.)); +#164079 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#164080 = ORIENTED_EDGE('',*,*,#164081,.T.); +#164081 = EDGE_CURVE('',#164073,#164054,#164082,.T.); +#164082 = LINE('',#164083,#164084); +#164083 = CARTESIAN_POINT('',(131.252902,-105.1181,1.585)); +#164084 = VECTOR('',#164085,1.); +#164085 = DIRECTION('',(-1.,0.,0.)); +#164086 = PLANE('',#164087); +#164087 = AXIS2_PLACEMENT_3D('',#164088,#164089,#164090); +#164088 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164089 = DIRECTION('',(0.,0.,1.)); +#164090 = DIRECTION('',(1.,0.,-0.)); +#164091 = SHELL_BASED_SURFACE_MODEL('',(#164092)); +#164092 = OPEN_SHELL('',(#164093)); +#164093 = ADVANCED_FACE('',(#164094),#164130,.T.); +#164094 = FACE_BOUND('',#164095,.F.); +#164095 = EDGE_LOOP('',(#164096,#164107,#164115,#164124)); +#164096 = ORIENTED_EDGE('',*,*,#164097,.T.); +#164097 = EDGE_CURVE('',#164098,#164100,#164102,.T.); +#164098 = VERTEX_POINT('',#164099); +#164099 = CARTESIAN_POINT('',(134.754392,-104.9056,1.585)); +#164100 = VERTEX_POINT('',#164101); +#164101 = CARTESIAN_POINT('',(134.754392,-104.7856,1.585)); +#164102 = CIRCLE('',#164103,6.000000000043E-02); +#164103 = AXIS2_PLACEMENT_3D('',#164104,#164105,#164106); +#164104 = CARTESIAN_POINT('',(134.75439177441,-104.8456,1.585)); +#164105 = DIRECTION('',(0.,0.,-1.)); +#164106 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#164107 = ORIENTED_EDGE('',*,*,#164108,.T.); +#164108 = EDGE_CURVE('',#164100,#164109,#164111,.T.); +#164109 = VERTEX_POINT('',#164110); +#164110 = CARTESIAN_POINT('',(135.228908,-104.7856,1.585)); +#164111 = LINE('',#164112,#164113); +#164112 = CARTESIAN_POINT('',(134.754392,-104.7856,1.585)); +#164113 = VECTOR('',#164114,1.); +#164114 = DIRECTION('',(1.,0.,0.)); +#164115 = ORIENTED_EDGE('',*,*,#164116,.T.); +#164116 = EDGE_CURVE('',#164109,#164117,#164119,.T.); +#164117 = VERTEX_POINT('',#164118); +#164118 = CARTESIAN_POINT('',(135.228908,-104.9056,1.585)); +#164119 = CIRCLE('',#164120,6.000000000043E-02); +#164120 = AXIS2_PLACEMENT_3D('',#164121,#164122,#164123); +#164121 = CARTESIAN_POINT('',(135.22890822558,-104.8456,1.585)); +#164122 = DIRECTION('',(0.,0.,-1.)); +#164123 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#164124 = ORIENTED_EDGE('',*,*,#164125,.T.); +#164125 = EDGE_CURVE('',#164117,#164098,#164126,.T.); +#164126 = LINE('',#164127,#164128); +#164127 = CARTESIAN_POINT('',(135.228908,-104.9056,1.585)); +#164128 = VECTOR('',#164129,1.); +#164129 = DIRECTION('',(-1.,0.,0.)); +#164130 = PLANE('',#164131); +#164131 = AXIS2_PLACEMENT_3D('',#164132,#164133,#164134); +#164132 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164133 = DIRECTION('',(0.,0.,1.)); +#164134 = DIRECTION('',(1.,0.,-0.)); +#164135 = SHELL_BASED_SURFACE_MODEL('',(#164136)); +#164136 = OPEN_SHELL('',(#164137)); +#164137 = ADVANCED_FACE('',(#164138),#164323,.T.); +#164138 = FACE_BOUND('',#164139,.F.); +#164139 = EDGE_LOOP('',(#164140,#164151,#164159,#164168,#164176,#164185, + #164193,#164201,#164209,#164218,#164226,#164235,#164243,#164252, + #164260,#164268,#164276,#164284,#164292,#164300,#164308,#164317)); +#164140 = ORIENTED_EDGE('',*,*,#164141,.T.); +#164141 = EDGE_CURVE('',#164142,#164144,#164146,.T.); +#164142 = VERTEX_POINT('',#164143); +#164143 = CARTESIAN_POINT('',(199.880039,-103.853597,1.585)); +#164144 = VERTEX_POINT('',#164145); +#164145 = CARTESIAN_POINT('',(199.97474,-103.96899,1.585)); +#164146 = CIRCLE('',#164147,7.500003178656E-02); +#164147 = AXIS2_PLACEMENT_3D('',#164148,#164149,#164150); +#164148 = CARTESIAN_POINT('',(199.9217065,-103.9159574378,1.585)); +#164149 = DIRECTION('',(0.,0.,-1.)); +#164150 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#164151 = ORIENTED_EDGE('',*,*,#164152,.T.); +#164152 = EDGE_CURVE('',#164144,#164153,#164155,.T.); +#164153 = VERTEX_POINT('',#164154); +#164154 = CARTESIAN_POINT('',(199.93964,-104.004089,1.585)); +#164155 = LINE('',#164156,#164157); +#164156 = CARTESIAN_POINT('',(199.97474,-103.96899,1.585)); +#164157 = VECTOR('',#164158,1.); +#164158 = DIRECTION('',(-0.707116854005,-0.707096708225,0.)); +#164159 = ORIENTED_EDGE('',*,*,#164160,.T.); +#164160 = EDGE_CURVE('',#164153,#164161,#164163,.T.); +#164161 = VERTEX_POINT('',#164162); +#164162 = CARTESIAN_POINT('',(199.93964,-104.304014,1.585)); +#164163 = CIRCLE('',#164164,0.299310989749); +#164164 = AXIS2_PLACEMENT_3D('',#164165,#164166,#164167); +#164165 = CARTESIAN_POINT('',(200.19867342868,-104.1540515,1.585)); +#164166 = DIRECTION('',(0.,0.,1.)); +#164167 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#164168 = ORIENTED_EDGE('',*,*,#164169,.T.); +#164169 = EDGE_CURVE('',#164161,#164170,#164172,.T.); +#164170 = VERTEX_POINT('',#164171); +#164171 = CARTESIAN_POINT('',(200.013753,-104.378127,1.585)); +#164172 = LINE('',#164173,#164174); +#164173 = CARTESIAN_POINT('',(199.93964,-104.304014,1.585)); +#164174 = VECTOR('',#164175,1.); +#164175 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#164176 = ORIENTED_EDGE('',*,*,#164177,.T.); +#164177 = EDGE_CURVE('',#164170,#164178,#164180,.T.); +#164178 = VERTEX_POINT('',#164179); +#164179 = CARTESIAN_POINT('',(200.388663,-104.460004,1.585)); +#164180 = CIRCLE('',#164181,0.611738044646); +#164181 = AXIS2_PLACEMENT_3D('',#164182,#164183,#164184); +#164182 = CARTESIAN_POINT('',(200.32514337395,-103.8515726625,1.585)); +#164183 = DIRECTION('',(0.,0.,1.)); +#164184 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#164185 = ORIENTED_EDGE('',*,*,#164186,.T.); +#164186 = EDGE_CURVE('',#164178,#164187,#164189,.T.); +#164187 = VERTEX_POINT('',#164188); +#164188 = CARTESIAN_POINT('',(200.562197,-104.41662,1.585)); +#164189 = LINE('',#164190,#164191); +#164190 = CARTESIAN_POINT('',(200.388663,-104.460004,1.585)); +#164191 = VECTOR('',#164192,1.); +#164192 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#164193 = ORIENTED_EDGE('',*,*,#164194,.T.); +#164194 = EDGE_CURVE('',#164187,#164195,#164197,.T.); +#164195 = VERTEX_POINT('',#164196); +#164196 = CARTESIAN_POINT('',(200.639184,-104.378126,1.585)); +#164197 = LINE('',#164198,#164199); +#164198 = CARTESIAN_POINT('',(200.562197,-104.41662,1.585)); +#164199 = VECTOR('',#164200,1.); +#164200 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#164201 = ORIENTED_EDGE('',*,*,#164202,.T.); +#164202 = EDGE_CURVE('',#164195,#164203,#164205,.T.); +#164203 = VERTEX_POINT('',#164204); +#164204 = CARTESIAN_POINT('',(200.713298,-104.304013,1.585)); +#164205 = LINE('',#164206,#164207); +#164206 = CARTESIAN_POINT('',(200.639184,-104.378126,1.585)); +#164207 = VECTOR('',#164208,1.); +#164208 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#164209 = ORIENTED_EDGE('',*,*,#164210,.T.); +#164210 = EDGE_CURVE('',#164203,#164211,#164213,.T.); +#164211 = VERTEX_POINT('',#164212); +#164212 = CARTESIAN_POINT('',(200.713298,-104.00409,1.585)); +#164213 = CIRCLE('',#164214,0.299306284995); +#164214 = AXIS2_PLACEMENT_3D('',#164215,#164216,#164217); +#164215 = CARTESIAN_POINT('',(200.45426942868,-104.1540515,1.585)); +#164216 = DIRECTION('',(0.,-0.,1.)); +#164217 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#164218 = ORIENTED_EDGE('',*,*,#164219,.T.); +#164219 = EDGE_CURVE('',#164211,#164220,#164222,.T.); +#164220 = VERTEX_POINT('',#164221); +#164221 = CARTESIAN_POINT('',(200.66887,-103.957625,1.585)); +#164222 = LINE('',#164223,#164224); +#164223 = CARTESIAN_POINT('',(200.713298,-104.00409,1.585)); +#164224 = VECTOR('',#164225,1.); +#164225 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#164226 = ORIENTED_EDGE('',*,*,#164227,.T.); +#164227 = EDGE_CURVE('',#164220,#164228,#164230,.T.); +#164228 = VERTEX_POINT('',#164229); +#164229 = CARTESIAN_POINT('',(200.784262,-103.862923,1.585)); +#164230 = CIRCLE('',#164231,7.499993690526E-02); +#164231 = AXIS2_PLACEMENT_3D('',#164232,#164233,#164234); +#164232 = CARTESIAN_POINT('',(200.73122982375,-103.9159567516,1.585)); +#164233 = DIRECTION('',(0.,0.,-1.)); +#164234 = DIRECTION('',(-0.831465016204,-0.555577111506,-0.)); +#164235 = ORIENTED_EDGE('',*,*,#164236,.T.); +#164236 = EDGE_CURVE('',#164228,#164237,#164239,.T.); +#164237 = VERTEX_POINT('',#164238); +#164238 = CARTESIAN_POINT('',(200.844007,-103.926433,1.585)); +#164239 = LINE('',#164240,#164241); +#164240 = CARTESIAN_POINT('',(200.784262,-103.862923,1.585)); +#164241 = VECTOR('',#164242,1.); +#164242 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#164243 = ORIENTED_EDGE('',*,*,#164244,.T.); +#164244 = EDGE_CURVE('',#164237,#164245,#164247,.T.); +#164245 = VERTEX_POINT('',#164246); +#164246 = CARTESIAN_POINT('',(200.841211,-104.386196,1.585)); +#164247 = CIRCLE('',#164248,0.461068563463); +#164248 = AXIS2_PLACEMENT_3D('',#164249,#164250,#164251); +#164249 = CARTESIAN_POINT('',(200.44294557362,-104.1538839891,1.585)); +#164250 = DIRECTION('',(0.,0.,-1.)); +#164251 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#164252 = ORIENTED_EDGE('',*,*,#164253,.T.); +#164253 = EDGE_CURVE('',#164245,#164254,#164256,.T.); +#164254 = VERTEX_POINT('',#164255); +#164255 = CARTESIAN_POINT('',(200.723448,-104.502884,1.585)); +#164256 = LINE('',#164257,#164258); +#164257 = CARTESIAN_POINT('',(200.841211,-104.386196,1.585)); +#164258 = VECTOR('',#164259,1.); +#164259 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#164260 = ORIENTED_EDGE('',*,*,#164261,.T.); +#164261 = EDGE_CURVE('',#164254,#164262,#164264,.T.); +#164262 = VERTEX_POINT('',#164263); +#164263 = CARTESIAN_POINT('',(200.606563,-104.560146,1.585)); +#164264 = LINE('',#164265,#164266); +#164265 = CARTESIAN_POINT('',(200.723448,-104.502884,1.585)); +#164266 = VECTOR('',#164267,1.); +#164267 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#164268 = ORIENTED_EDGE('',*,*,#164269,.T.); +#164269 = EDGE_CURVE('',#164262,#164270,#164272,.T.); +#164270 = VERTEX_POINT('',#164271); +#164271 = CARTESIAN_POINT('',(200.397897,-104.610004,1.585)); +#164272 = LINE('',#164273,#164274); +#164273 = CARTESIAN_POINT('',(200.606563,-104.560146,1.585)); +#164274 = VECTOR('',#164275,1.); +#164275 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#164276 = ORIENTED_EDGE('',*,*,#164277,.T.); +#164277 = EDGE_CURVE('',#164270,#164278,#164280,.T.); +#164278 = VERTEX_POINT('',#164279); +#164279 = CARTESIAN_POINT('',(200.23685,-104.607765,1.585)); +#164280 = LINE('',#164281,#164282); +#164281 = CARTESIAN_POINT('',(200.397897,-104.610004,1.585)); +#164282 = VECTOR('',#164283,1.); +#164283 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#164284 = ORIENTED_EDGE('',*,*,#164285,.T.); +#164285 = EDGE_CURVE('',#164278,#164286,#164288,.T.); +#164286 = VERTEX_POINT('',#164287); +#164287 = CARTESIAN_POINT('',(200.031023,-104.554467,1.585)); +#164288 = LINE('',#164289,#164290); +#164289 = CARTESIAN_POINT('',(200.23685,-104.607765,1.585)); +#164290 = VECTOR('',#164291,1.); +#164291 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#164292 = ORIENTED_EDGE('',*,*,#164293,.T.); +#164293 = EDGE_CURVE('',#164286,#164294,#164296,.T.); +#164294 = VERTEX_POINT('',#164295); +#164295 = CARTESIAN_POINT('',(199.922043,-104.497519,1.585)); +#164296 = LINE('',#164297,#164298); +#164297 = CARTESIAN_POINT('',(200.031023,-104.554467,1.585)); +#164298 = VECTOR('',#164299,1.); +#164299 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#164300 = ORIENTED_EDGE('',*,*,#164301,.T.); +#164301 = EDGE_CURVE('',#164294,#164302,#164304,.T.); +#164302 = VERTEX_POINT('',#164303); +#164303 = CARTESIAN_POINT('',(199.808931,-104.38167,1.585)); +#164304 = LINE('',#164305,#164306); +#164305 = CARTESIAN_POINT('',(199.922043,-104.497519,1.585)); +#164306 = VECTOR('',#164307,1.); +#164307 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#164308 = ORIENTED_EDGE('',*,*,#164309,.T.); +#164309 = EDGE_CURVE('',#164302,#164310,#164312,.T.); +#164310 = VERTEX_POINT('',#164311); +#164311 = CARTESIAN_POINT('',(199.811728,-103.921908,1.585)); +#164312 = CIRCLE('',#164313,0.461058290907); +#164313 = AXIS2_PLACEMENT_3D('',#164314,#164315,#164316); +#164314 = CARTESIAN_POINT('',(200.20998135644,-104.1542203149,1.585)); +#164315 = DIRECTION('',(0.,0.,-1.)); +#164316 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#164317 = ORIENTED_EDGE('',*,*,#164318,.T.); +#164318 = EDGE_CURVE('',#164310,#164142,#164319,.T.); +#164319 = LINE('',#164320,#164321); +#164320 = CARTESIAN_POINT('',(199.811728,-103.921908,1.585)); +#164321 = VECTOR('',#164322,1.); +#164322 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#164323 = PLANE('',#164324); +#164324 = AXIS2_PLACEMENT_3D('',#164325,#164326,#164327); +#164325 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164326 = DIRECTION('',(0.,0.,1.)); +#164327 = DIRECTION('',(1.,0.,-0.)); +#164328 = SHELL_BASED_SURFACE_MODEL('',(#164329)); +#164329 = OPEN_SHELL('',(#164330)); +#164330 = ADVANCED_FACE('',(#164331,#164519),#164653,.T.); +#164331 = FACE_BOUND('',#164332,.F.); +#164332 = EDGE_LOOP('',(#164333,#164344,#164352,#164360,#164368,#164376, + #164384,#164392,#164400,#164408,#164416,#164425,#164433,#164441, + #164449,#164457,#164465,#164473,#164481,#164489,#164497,#164505, + #164513)); +#164333 = ORIENTED_EDGE('',*,*,#164334,.T.); +#164334 = EDGE_CURVE('',#164335,#164337,#164339,.T.); +#164335 = VERTEX_POINT('',#164336); +#164336 = CARTESIAN_POINT('',(92.047647,-102.862418,1.585)); +#164337 = VERTEX_POINT('',#164338); +#164338 = CARTESIAN_POINT('',(92.515718,-102.867786,1.585)); +#164339 = CIRCLE('',#164340,0.397578964435); +#164340 = AXIS2_PLACEMENT_3D('',#164341,#164342,#164343); +#164341 = CARTESIAN_POINT('',(92.277996972123,-103.1864672606,1.585)); +#164342 = DIRECTION('',(0.,0.,-1.)); +#164343 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#164344 = ORIENTED_EDGE('',*,*,#164345,.T.); +#164345 = EDGE_CURVE('',#164337,#164346,#164348,.T.); +#164346 = VERTEX_POINT('',#164347); +#164347 = CARTESIAN_POINT('',(92.626034,-102.979108,1.585)); +#164348 = LINE('',#164349,#164350); +#164349 = CARTESIAN_POINT('',(92.515718,-102.867786,1.585)); +#164350 = VECTOR('',#164351,1.); +#164351 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#164352 = ORIENTED_EDGE('',*,*,#164353,.T.); +#164353 = EDGE_CURVE('',#164346,#164354,#164356,.T.); +#164354 = VERTEX_POINT('',#164355); +#164355 = CARTESIAN_POINT('',(92.636434,-103.002586,1.585)); +#164356 = LINE('',#164357,#164358); +#164357 = CARTESIAN_POINT('',(92.626034,-102.979108,1.585)); +#164358 = VECTOR('',#164359,1.); +#164359 = DIRECTION('',(0.405010807319,-0.914311897524,0.)); +#164360 = ORIENTED_EDGE('',*,*,#164361,.T.); +#164361 = EDGE_CURVE('',#164354,#164362,#164364,.T.); +#164362 = VERTEX_POINT('',#164363); +#164363 = CARTESIAN_POINT('',(92.686292,-103.211252,1.585)); +#164364 = LINE('',#164365,#164366); +#164365 = CARTESIAN_POINT('',(92.636434,-103.002586,1.585)); +#164366 = VECTOR('',#164367,1.); +#164367 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#164368 = ORIENTED_EDGE('',*,*,#164369,.T.); +#164369 = EDGE_CURVE('',#164362,#164370,#164372,.T.); +#164370 = VERTEX_POINT('',#164371); +#164371 = CARTESIAN_POINT('',(92.684053,-103.562775,1.585)); +#164372 = LINE('',#164373,#164374); +#164373 = CARTESIAN_POINT('',(92.686292,-103.211252,1.585)); +#164374 = VECTOR('',#164375,1.); +#164375 = DIRECTION('',(-6.369297552953E-03,-0.999979715819,0.)); +#164376 = ORIENTED_EDGE('',*,*,#164377,.T.); +#164377 = EDGE_CURVE('',#164370,#164378,#164380,.T.); +#164378 = VERTEX_POINT('',#164379); +#164379 = CARTESIAN_POINT('',(92.631487,-103.767097,1.585)); +#164380 = LINE('',#164381,#164382); +#164381 = CARTESIAN_POINT('',(92.684053,-103.562775,1.585)); +#164382 = VECTOR('',#164383,1.); +#164383 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#164384 = ORIENTED_EDGE('',*,*,#164385,.T.); +#164385 = EDGE_CURVE('',#164378,#164386,#164388,.T.); +#164386 = VERTEX_POINT('',#164387); +#164387 = CARTESIAN_POINT('',(92.616707,-103.788093,1.585)); +#164388 = LINE('',#164389,#164390); +#164389 = CARTESIAN_POINT('',(92.631487,-103.767097,1.585)); +#164390 = VECTOR('',#164391,1.); +#164391 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#164392 = ORIENTED_EDGE('',*,*,#164393,.T.); +#164393 = EDGE_CURVE('',#164386,#164394,#164396,.T.); +#164394 = VERTEX_POINT('',#164395); +#164395 = CARTESIAN_POINT('',(92.5745,-103.830299,1.585)); +#164396 = LINE('',#164397,#164398); +#164397 = CARTESIAN_POINT('',(92.616707,-103.788093,1.585)); +#164398 = VECTOR('',#164399,1.); +#164399 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#164400 = ORIENTED_EDGE('',*,*,#164401,.T.); +#164401 = EDGE_CURVE('',#164394,#164402,#164404,.T.); +#164402 = VERTEX_POINT('',#164403); +#164403 = CARTESIAN_POINT('',(92.6081,-103.863899,1.585)); +#164404 = LINE('',#164405,#164406); +#164405 = CARTESIAN_POINT('',(92.5745,-103.830299,1.585)); +#164406 = VECTOR('',#164407,1.); +#164407 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#164408 = ORIENTED_EDGE('',*,*,#164409,.T.); +#164409 = EDGE_CURVE('',#164402,#164410,#164412,.T.); +#164410 = VERTEX_POINT('',#164411); +#164411 = CARTESIAN_POINT('',(92.704895,-103.913907,1.585)); +#164412 = LINE('',#164413,#164414); +#164413 = CARTESIAN_POINT('',(92.6081,-103.863899,1.585)); +#164414 = VECTOR('',#164415,1.); +#164415 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#164416 = ORIENTED_EDGE('',*,*,#164417,.T.); +#164417 = EDGE_CURVE('',#164410,#164418,#164420,.T.); +#164418 = VERTEX_POINT('',#164419); +#164419 = CARTESIAN_POINT('',(92.62537,-104.040239,1.585)); +#164420 = CIRCLE('',#164421,7.500029440362E-02); +#164421 = AXIS2_PLACEMENT_3D('',#164422,#164423,#164424); +#164422 = CARTESIAN_POINT('',(92.658911053971,-103.9731566486,1.585)); +#164423 = DIRECTION('',(0.,0.,-1.)); +#164424 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#164425 = ORIENTED_EDGE('',*,*,#164426,.T.); +#164426 = EDGE_CURVE('',#164418,#164427,#164429,.T.); +#164427 = VERTEX_POINT('',#164428); +#164428 = CARTESIAN_POINT('',(92.51639,-103.983291,1.585)); +#164429 = LINE('',#164430,#164431); +#164430 = CARTESIAN_POINT('',(92.62537,-104.040239,1.585)); +#164431 = VECTOR('',#164432,1.); +#164432 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#164433 = ORIENTED_EDGE('',*,*,#164434,.T.); +#164434 = EDGE_CURVE('',#164427,#164435,#164437,.T.); +#164435 = VERTEX_POINT('',#164436); +#164436 = CARTESIAN_POINT('',(92.453626,-103.921557,1.585)); +#164437 = LINE('',#164438,#164439); +#164438 = CARTESIAN_POINT('',(92.51639,-103.983291,1.585)); +#164439 = VECTOR('',#164440,1.); +#164440 = DIRECTION('',(-0.712932436519,0.701232729527,0.)); +#164441 = ORIENTED_EDGE('',*,*,#164442,.T.); +#164442 = EDGE_CURVE('',#164435,#164443,#164445,.T.); +#164443 = VERTEX_POINT('',#164444); +#164444 = CARTESIAN_POINT('',(92.387829,-103.951478,1.585)); +#164445 = LINE('',#164446,#164447); +#164446 = CARTESIAN_POINT('',(92.453626,-103.921557,1.585)); +#164447 = VECTOR('',#164448,1.); +#164448 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#164449 = ORIENTED_EDGE('',*,*,#164450,.T.); +#164450 = EDGE_CURVE('',#164443,#164451,#164453,.T.); +#164451 = VERTEX_POINT('',#164452); +#164452 = CARTESIAN_POINT('',(92.162911,-103.950256,1.585)); +#164453 = LINE('',#164454,#164455); +#164454 = CARTESIAN_POINT('',(92.387829,-103.951478,1.585)); +#164455 = VECTOR('',#164456,1.); +#164456 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#164457 = ORIENTED_EDGE('',*,*,#164458,.T.); +#164458 = EDGE_CURVE('',#164451,#164459,#164461,.T.); +#164459 = VERTEX_POINT('',#164460); +#164460 = CARTESIAN_POINT('',(92.0402,-103.888053,1.585)); +#164461 = LINE('',#164462,#164463); +#164462 = CARTESIAN_POINT('',(92.162911,-103.950256,1.585)); +#164463 = VECTOR('',#164464,1.); +#164464 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#164465 = ORIENTED_EDGE('',*,*,#164466,.T.); +#164466 = EDGE_CURVE('',#164459,#164467,#164469,.T.); +#164467 = VERTEX_POINT('',#164468); +#164468 = CARTESIAN_POINT('',(91.929884,-103.776728,1.585)); +#164469 = LINE('',#164470,#164471); +#164470 = CARTESIAN_POINT('',(92.0402,-103.888053,1.585)); +#164471 = VECTOR('',#164472,1.); +#164472 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#164473 = ORIENTED_EDGE('',*,*,#164474,.T.); +#164474 = EDGE_CURVE('',#164467,#164475,#164477,.T.); +#164475 = VERTEX_POINT('',#164476); +#164476 = CARTESIAN_POINT('',(91.919484,-103.753251,1.585)); +#164477 = LINE('',#164478,#164479); +#164478 = CARTESIAN_POINT('',(91.929884,-103.776728,1.585)); +#164479 = VECTOR('',#164480,1.); +#164480 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#164481 = ORIENTED_EDGE('',*,*,#164482,.T.); +#164482 = EDGE_CURVE('',#164475,#164483,#164485,.T.); +#164483 = VERTEX_POINT('',#164484); +#164484 = CARTESIAN_POINT('',(91.869626,-103.544585,1.585)); +#164485 = LINE('',#164486,#164487); +#164486 = CARTESIAN_POINT('',(91.919484,-103.753251,1.585)); +#164487 = VECTOR('',#164488,1.); +#164488 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#164489 = ORIENTED_EDGE('',*,*,#164490,.T.); +#164490 = EDGE_CURVE('',#164483,#164491,#164493,.T.); +#164491 = VERTEX_POINT('',#164492); +#164492 = CARTESIAN_POINT('',(91.871865,-103.193062,1.585)); +#164493 = LINE('',#164494,#164495); +#164494 = CARTESIAN_POINT('',(91.869626,-103.544585,1.585)); +#164495 = VECTOR('',#164496,1.); +#164496 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#164497 = ORIENTED_EDGE('',*,*,#164498,.T.); +#164498 = EDGE_CURVE('',#164491,#164499,#164501,.T.); +#164499 = VERTEX_POINT('',#164500); +#164500 = CARTESIAN_POINT('',(91.924431,-102.98874,1.585)); +#164501 = LINE('',#164502,#164503); +#164502 = CARTESIAN_POINT('',(91.871865,-103.193062,1.585)); +#164503 = VECTOR('',#164504,1.); +#164504 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#164505 = ORIENTED_EDGE('',*,*,#164506,.T.); +#164506 = EDGE_CURVE('',#164499,#164507,#164509,.T.); +#164507 = VERTEX_POINT('',#164508); +#164508 = CARTESIAN_POINT('',(91.939212,-102.967743,1.585)); +#164509 = LINE('',#164510,#164511); +#164510 = CARTESIAN_POINT('',(91.924431,-102.98874,1.585)); +#164511 = VECTOR('',#164512,1.); +#164512 = DIRECTION('',(0.575632310301,0.817708654313,0.)); +#164513 = ORIENTED_EDGE('',*,*,#164514,.T.); +#164514 = EDGE_CURVE('',#164507,#164335,#164515,.T.); +#164515 = LINE('',#164516,#164517); +#164516 = CARTESIAN_POINT('',(91.939212,-102.967743,1.585)); +#164517 = VECTOR('',#164518,1.); +#164518 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#164519 = FACE_BOUND('',#164520,.F.); +#164520 = EDGE_LOOP('',(#164521,#164532,#164540,#164549,#164557,#164565, + #164573,#164581,#164589,#164597,#164606,#164614,#164622,#164630, + #164638,#164647)); +#164521 = ORIENTED_EDGE('',*,*,#164522,.T.); +#164522 = EDGE_CURVE('',#164523,#164525,#164527,.T.); +#164523 = VERTEX_POINT('',#164524); +#164524 = CARTESIAN_POINT('',(92.424008,-102.987177,1.585)); +#164525 = VERTEX_POINT('',#164526); +#164526 = CARTESIAN_POINT('',(92.13191,-102.987177,1.585)); +#164527 = CIRCLE('',#164528,0.252889603602); +#164528 = AXIS2_PLACEMENT_3D('',#164529,#164530,#164531); +#164529 = CARTESIAN_POINT('',(92.277959,-103.19363,1.585)); +#164530 = DIRECTION('',(0.,0.,1.)); +#164531 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#164532 = ORIENTED_EDGE('',*,*,#164533,.T.); +#164533 = EDGE_CURVE('',#164525,#164534,#164536,.T.); +#164534 = VERTEX_POINT('',#164535); +#164535 = CARTESIAN_POINT('',(92.059967,-103.059119,1.585)); +#164536 = LINE('',#164537,#164538); +#164537 = CARTESIAN_POINT('',(92.13191,-102.987177,1.585)); +#164538 = VECTOR('',#164539,1.); +#164539 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#164540 = ORIENTED_EDGE('',*,*,#164541,.T.); +#164541 = EDGE_CURVE('',#164534,#164542,#164544,.T.); +#164542 = VERTEX_POINT('',#164543); +#164543 = CARTESIAN_POINT('',(92.059967,-103.696717,1.585)); +#164544 = CIRCLE('',#164545,0.985308713638); +#164545 = AXIS2_PLACEMENT_3D('',#164546,#164547,#164548); +#164546 = CARTESIAN_POINT('',(92.992276207704,-103.377918,1.585)); +#164547 = DIRECTION('',(0.,0.,1.)); +#164548 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#164549 = ORIENTED_EDGE('',*,*,#164550,.T.); +#164550 = EDGE_CURVE('',#164542,#164551,#164553,.T.); +#164551 = VERTEX_POINT('',#164552); +#164552 = CARTESIAN_POINT('',(92.13191,-103.768661,1.585)); +#164553 = LINE('',#164554,#164555); +#164554 = CARTESIAN_POINT('',(92.059967,-103.696717,1.585)); +#164555 = VECTOR('',#164556,1.); +#164556 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#164557 = ORIENTED_EDGE('',*,*,#164558,.T.); +#164558 = EDGE_CURVE('',#164551,#164559,#164561,.T.); +#164559 = VERTEX_POINT('',#164560); +#164560 = CARTESIAN_POINT('',(92.200426,-103.802919,1.585)); +#164561 = LINE('',#164562,#164563); +#164562 = CARTESIAN_POINT('',(92.13191,-103.768661,1.585)); +#164563 = VECTOR('',#164564,1.); +#164564 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#164565 = ORIENTED_EDGE('',*,*,#164566,.T.); +#164566 = EDGE_CURVE('',#164559,#164567,#164569,.T.); +#164567 = VERTEX_POINT('',#164568); +#164568 = CARTESIAN_POINT('',(92.334989,-103.802919,1.585)); +#164569 = LINE('',#164570,#164571); +#164570 = CARTESIAN_POINT('',(92.200426,-103.802919,1.585)); +#164571 = VECTOR('',#164572,1.); +#164572 = DIRECTION('',(1.,0.,0.)); +#164573 = ORIENTED_EDGE('',*,*,#164574,.T.); +#164574 = EDGE_CURVE('',#164567,#164575,#164577,.T.); +#164575 = VERTEX_POINT('',#164576); +#164576 = CARTESIAN_POINT('',(92.28115,-103.74908,1.585)); +#164577 = LINE('',#164578,#164579); +#164578 = CARTESIAN_POINT('',(92.334989,-103.802919,1.585)); +#164579 = VECTOR('',#164580,1.); +#164580 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164581 = ORIENTED_EDGE('',*,*,#164582,.T.); +#164582 = EDGE_CURVE('',#164575,#164583,#164585,.T.); +#164583 = VERTEX_POINT('',#164584); +#164584 = CARTESIAN_POINT('',(92.212635,-103.714823,1.585)); +#164585 = LINE('',#164586,#164587); +#164586 = CARTESIAN_POINT('',(92.28115,-103.74908,1.585)); +#164587 = VECTOR('',#164588,1.); +#164588 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#164589 = ORIENTED_EDGE('',*,*,#164590,.T.); +#164590 = EDGE_CURVE('',#164583,#164591,#164593,.T.); +#164591 = VERTEX_POINT('',#164592); +#164592 = CARTESIAN_POINT('',(92.12047,-103.713382,1.585)); +#164593 = LINE('',#164594,#164595); +#164594 = CARTESIAN_POINT('',(92.212635,-103.714823,1.585)); +#164595 = VECTOR('',#164596,1.); +#164596 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#164597 = ORIENTED_EDGE('',*,*,#164598,.T.); +#164598 = EDGE_CURVE('',#164591,#164599,#164601,.T.); +#164599 = VERTEX_POINT('',#164600); +#164600 = CARTESIAN_POINT('',(92.135102,-103.564823,1.585)); +#164601 = CIRCLE('',#164602,7.500006711464E-02); +#164602 = AXIS2_PLACEMENT_3D('',#164603,#164604,#164605); +#164603 = CARTESIAN_POINT('',(92.135101932885,-103.6398230671,1.585)); +#164604 = DIRECTION('',(0.,0.,-1.)); +#164605 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#164606 = ORIENTED_EDGE('',*,*,#164607,.T.); +#164607 = EDGE_CURVE('',#164599,#164608,#164610,.T.); +#164608 = VERTEX_POINT('',#164609); +#164609 = CARTESIAN_POINT('',(92.250149,-103.567486,1.585)); +#164610 = LINE('',#164611,#164612); +#164611 = CARTESIAN_POINT('',(92.135102,-103.564823,1.585)); +#164612 = VECTOR('',#164613,1.); +#164613 = DIRECTION('',(0.999732214371,-2.314086318521E-02,0.)); +#164614 = ORIENTED_EDGE('',*,*,#164615,.T.); +#164615 = EDGE_CURVE('',#164608,#164616,#164618,.T.); +#164616 = VERTEX_POINT('',#164617); +#164617 = CARTESIAN_POINT('',(92.372861,-103.62969,1.585)); +#164618 = LINE('',#164619,#164620); +#164619 = CARTESIAN_POINT('',(92.250149,-103.567486,1.585)); +#164620 = VECTOR('',#164621,1.); +#164621 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#164622 = ORIENTED_EDGE('',*,*,#164623,.T.); +#164623 = EDGE_CURVE('',#164616,#164624,#164626,.T.); +#164624 = VERTEX_POINT('',#164625); +#164625 = CARTESIAN_POINT('',(92.468434,-103.724233,1.585)); +#164626 = LINE('',#164627,#164628); +#164627 = CARTESIAN_POINT('',(92.372861,-103.62969,1.585)); +#164628 = VECTOR('',#164629,1.); +#164629 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#164630 = ORIENTED_EDGE('',*,*,#164631,.T.); +#164631 = EDGE_CURVE('',#164624,#164632,#164634,.T.); +#164632 = VERTEX_POINT('',#164633); +#164633 = CARTESIAN_POINT('',(92.49595,-103.696717,1.585)); +#164634 = LINE('',#164635,#164636); +#164635 = CARTESIAN_POINT('',(92.468434,-103.724233,1.585)); +#164636 = VECTOR('',#164637,1.); +#164637 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#164638 = ORIENTED_EDGE('',*,*,#164639,.T.); +#164639 = EDGE_CURVE('',#164632,#164640,#164642,.T.); +#164640 = VERTEX_POINT('',#164641); +#164641 = CARTESIAN_POINT('',(92.49595,-103.059119,1.585)); +#164642 = CIRCLE('',#164643,0.985282207896); +#164643 = AXIS2_PLACEMENT_3D('',#164644,#164645,#164646); +#164644 = CARTESIAN_POINT('',(91.563668804869,-103.377918,1.585)); +#164645 = DIRECTION('',(0.,-0.,1.)); +#164646 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#164647 = ORIENTED_EDGE('',*,*,#164648,.T.); +#164648 = EDGE_CURVE('',#164640,#164523,#164649,.T.); +#164649 = LINE('',#164650,#164651); +#164650 = CARTESIAN_POINT('',(92.49595,-103.059119,1.585)); +#164651 = VECTOR('',#164652,1.); +#164652 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164653 = PLANE('',#164654); +#164654 = AXIS2_PLACEMENT_3D('',#164655,#164656,#164657); +#164655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164656 = DIRECTION('',(0.,0.,1.)); +#164657 = DIRECTION('',(1.,0.,-0.)); +#164658 = SHELL_BASED_SURFACE_MODEL('',(#164659)); +#164659 = OPEN_SHELL('',(#164660)); +#164660 = ADVANCED_FACE('',(#164661),#164796,.T.); +#164661 = FACE_BOUND('',#164662,.F.); +#164662 = EDGE_LOOP('',(#164663,#164674,#164682,#164690,#164698,#164707, + #164715,#164723,#164732,#164740,#164748,#164757,#164765,#164773, + #164782,#164790)); +#164663 = ORIENTED_EDGE('',*,*,#164664,.T.); +#164664 = EDGE_CURVE('',#164665,#164667,#164669,.T.); +#164665 = VERTEX_POINT('',#164666); +#164666 = CARTESIAN_POINT('',(93.184357,-102.771051,1.585)); +#164667 = VERTEX_POINT('',#164668); +#164668 = CARTESIAN_POINT('',(93.301491,-102.854018,1.585)); +#164669 = CIRCLE('',#164670,7.499955990671E-02); +#164670 = AXIS2_PLACEMENT_3D('',#164671,#164672,#164673); +#164671 = CARTESIAN_POINT('',(93.230340500953,-102.8303000643,1.585)); +#164672 = DIRECTION('',(0.,0.,-1.)); +#164673 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#164674 = ORIENTED_EDGE('',*,*,#164675,.T.); +#164675 = EDGE_CURVE('',#164667,#164676,#164678,.T.); +#164676 = VERTEX_POINT('',#164677); +#164677 = CARTESIAN_POINT('',(93.096302,-103.469585,1.585)); +#164678 = LINE('',#164679,#164680); +#164679 = CARTESIAN_POINT('',(93.301491,-102.854018,1.585)); +#164680 = VECTOR('',#164681,1.); +#164681 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#164682 = ORIENTED_EDGE('',*,*,#164683,.T.); +#164683 = EDGE_CURVE('',#164676,#164684,#164686,.T.); +#164684 = VERTEX_POINT('',#164685); +#164685 = CARTESIAN_POINT('',(93.393435,-103.469585,1.585)); +#164686 = LINE('',#164687,#164688); +#164687 = CARTESIAN_POINT('',(93.096302,-103.469585,1.585)); +#164688 = VECTOR('',#164689,1.); +#164689 = DIRECTION('',(1.,0.,0.)); +#164690 = ORIENTED_EDGE('',*,*,#164691,.T.); +#164691 = EDGE_CURVE('',#164684,#164692,#164694,.T.); +#164692 = VERTEX_POINT('',#164693); +#164693 = CARTESIAN_POINT('',(93.394876,-103.19662,1.585)); +#164694 = LINE('',#164695,#164696); +#164695 = CARTESIAN_POINT('',(93.393435,-103.469585,1.585)); +#164696 = VECTOR('',#164697,1.); +#164697 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#164698 = ORIENTED_EDGE('',*,*,#164699,.T.); +#164699 = EDGE_CURVE('',#164692,#164700,#164702,.T.); +#164700 = VERTEX_POINT('',#164701); +#164701 = CARTESIAN_POINT('',(93.543435,-103.211252,1.585)); +#164702 = CIRCLE('',#164703,7.500006711464E-02); +#164703 = AXIS2_PLACEMENT_3D('',#164704,#164705,#164706); +#164704 = CARTESIAN_POINT('',(93.468434932885,-103.2112519328,1.585)); +#164705 = DIRECTION('',(0.,0.,-1.)); +#164706 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#164707 = ORIENTED_EDGE('',*,*,#164708,.T.); +#164708 = EDGE_CURVE('',#164700,#164709,#164711,.T.); +#164709 = VERTEX_POINT('',#164710); +#164710 = CARTESIAN_POINT('',(93.543435,-103.469585,1.585)); +#164711 = LINE('',#164712,#164713); +#164712 = CARTESIAN_POINT('',(93.543435,-103.211252,1.585)); +#164713 = VECTOR('',#164714,1.); +#164714 = DIRECTION('',(0.,-1.,0.)); +#164715 = ORIENTED_EDGE('',*,*,#164716,.T.); +#164716 = EDGE_CURVE('',#164709,#164717,#164719,.T.); +#164717 = VERTEX_POINT('',#164718); +#164718 = CARTESIAN_POINT('',(93.625924,-103.471026,1.585)); +#164719 = LINE('',#164720,#164721); +#164720 = CARTESIAN_POINT('',(93.543435,-103.469585,1.585)); +#164721 = VECTOR('',#164722,1.); +#164722 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#164723 = ORIENTED_EDGE('',*,*,#164724,.T.); +#164724 = EDGE_CURVE('',#164717,#164725,#164727,.T.); +#164725 = VERTEX_POINT('',#164726); +#164726 = CARTESIAN_POINT('',(93.611292,-103.619585,1.585)); +#164727 = CIRCLE('',#164728,7.500006711464E-02); +#164728 = AXIS2_PLACEMENT_3D('',#164729,#164730,#164731); +#164729 = CARTESIAN_POINT('',(93.611292067115,-103.5445849328,1.585)); +#164730 = DIRECTION('',(0.,0.,-1.)); +#164731 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#164732 = ORIENTED_EDGE('',*,*,#164733,.T.); +#164733 = EDGE_CURVE('',#164725,#164734,#164736,.T.); +#164734 = VERTEX_POINT('',#164735); +#164735 = CARTESIAN_POINT('',(93.543435,-103.619585,1.585)); +#164736 = LINE('',#164737,#164738); +#164737 = CARTESIAN_POINT('',(93.611292,-103.619585,1.585)); +#164738 = VECTOR('',#164739,1.); +#164739 = DIRECTION('',(-1.,0.,0.)); +#164740 = ORIENTED_EDGE('',*,*,#164741,.T.); +#164741 = EDGE_CURVE('',#164734,#164742,#164744,.T.); +#164742 = VERTEX_POINT('',#164743); +#164743 = CARTESIAN_POINT('',(93.541994,-103.892551,1.585)); +#164744 = LINE('',#164745,#164746); +#164745 = CARTESIAN_POINT('',(93.543435,-103.619585,1.585)); +#164746 = VECTOR('',#164747,1.); +#164747 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#164748 = ORIENTED_EDGE('',*,*,#164749,.T.); +#164749 = EDGE_CURVE('',#164742,#164750,#164752,.T.); +#164750 = VERTEX_POINT('',#164751); +#164751 = CARTESIAN_POINT('',(93.393435,-103.877919,1.585)); +#164752 = CIRCLE('',#164753,7.500006711464E-02); +#164753 = AXIS2_PLACEMENT_3D('',#164754,#164755,#164756); +#164754 = CARTESIAN_POINT('',(93.468435067115,-103.8779190671,1.585)); +#164755 = DIRECTION('',(-0.,0.,-1.)); +#164756 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#164757 = ORIENTED_EDGE('',*,*,#164758,.T.); +#164758 = EDGE_CURVE('',#164750,#164759,#164761,.T.); +#164759 = VERTEX_POINT('',#164760); +#164760 = CARTESIAN_POINT('',(93.393435,-103.619585,1.585)); +#164761 = LINE('',#164762,#164763); +#164762 = CARTESIAN_POINT('',(93.393435,-103.877919,1.585)); +#164763 = VECTOR('',#164764,1.); +#164764 = DIRECTION('',(0.,1.,0.)); +#164765 = ORIENTED_EDGE('',*,*,#164766,.T.); +#164766 = EDGE_CURVE('',#164759,#164767,#164769,.T.); +#164767 = VERTEX_POINT('',#164768); +#164768 = CARTESIAN_POINT('',(92.977613,-103.618144,1.585)); +#164769 = LINE('',#164770,#164771); +#164770 = CARTESIAN_POINT('',(93.393435,-103.619585,1.585)); +#164771 = VECTOR('',#164772,1.); +#164772 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#164773 = ORIENTED_EDGE('',*,*,#164774,.T.); +#164774 = EDGE_CURVE('',#164767,#164775,#164777,.T.); +#164775 = VERTEX_POINT('',#164776); +#164776 = CARTESIAN_POINT('',(92.921094,-103.520868,1.585)); +#164777 = CIRCLE('',#164778,7.499997045037E-02); +#164778 = AXIS2_PLACEMENT_3D('',#164779,#164780,#164781); +#164779 = CARTESIAN_POINT('',(92.992245172573,-103.5445852133,1.585)); +#164780 = DIRECTION('',(0.,0.,-1.)); +#164781 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#164782 = ORIENTED_EDGE('',*,*,#164783,.T.); +#164783 = EDGE_CURVE('',#164775,#164784,#164786,.T.); +#164784 = VERTEX_POINT('',#164785); +#164785 = CARTESIAN_POINT('',(93.165183,-102.793158,1.585)); +#164786 = LINE('',#164787,#164788); +#164787 = CARTESIAN_POINT('',(92.921094,-103.520868,1.585)); +#164788 = VECTOR('',#164789,1.); +#164789 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#164790 = ORIENTED_EDGE('',*,*,#164791,.T.); +#164791 = EDGE_CURVE('',#164784,#164665,#164792,.T.); +#164792 = LINE('',#164793,#164794); +#164793 = CARTESIAN_POINT('',(93.165183,-102.793158,1.585)); +#164794 = VECTOR('',#164795,1.); +#164795 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#164796 = PLANE('',#164797); +#164797 = AXIS2_PLACEMENT_3D('',#164798,#164799,#164800); +#164798 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164799 = DIRECTION('',(0.,0.,1.)); +#164800 = DIRECTION('',(1.,0.,-0.)); +#164801 = SHELL_BASED_SURFACE_MODEL('',(#164802)); +#164802 = OPEN_SHELL('',(#164803)); +#164803 = ADVANCED_FACE('',(#164804),#164906,.T.); +#164804 = FACE_BOUND('',#164805,.F.); +#164805 = EDGE_LOOP('',(#164806,#164817,#164825,#164834,#164842,#164850, + #164858,#164867,#164875,#164884,#164892,#164900)); +#164806 = ORIENTED_EDGE('',*,*,#164807,.T.); +#164807 = EDGE_CURVE('',#164808,#164810,#164812,.T.); +#164808 = VERTEX_POINT('',#164809); +#164809 = CARTESIAN_POINT('',(82.683526,-102.454261,1.585)); +#164810 = VERTEX_POINT('',#164811); +#164811 = CARTESIAN_POINT('',(82.683526,-102.160025,1.585)); +#164812 = CIRCLE('',#164813,0.150000292066); +#164813 = AXIS2_PLACEMENT_3D('',#164814,#164815,#164816); +#164814 = CARTESIAN_POINT('',(82.71279,-102.307143,1.585)); +#164815 = DIRECTION('',(0.,0.,-1.)); +#164816 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#164817 = ORIENTED_EDGE('',*,*,#164818,.T.); +#164818 = EDGE_CURVE('',#164810,#164819,#164821,.T.); +#164819 = VERTEX_POINT('',#164820); +#164820 = CARTESIAN_POINT('',(85.342054,-102.160025,1.585)); +#164821 = LINE('',#164822,#164823); +#164822 = CARTESIAN_POINT('',(82.683526,-102.160025,1.585)); +#164823 = VECTOR('',#164824,1.); +#164824 = DIRECTION('',(1.,0.,0.)); +#164825 = ORIENTED_EDGE('',*,*,#164826,.T.); +#164826 = EDGE_CURVE('',#164819,#164827,#164829,.T.); +#164827 = VERTEX_POINT('',#164828); +#164828 = CARTESIAN_POINT('',(85.342054,-102.454261,1.585)); +#164829 = CIRCLE('',#164830,0.150000292066); +#164830 = AXIS2_PLACEMENT_3D('',#164831,#164832,#164833); +#164831 = CARTESIAN_POINT('',(85.31279,-102.307143,1.585)); +#164832 = DIRECTION('',(0.,0.,-1.)); +#164833 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#164834 = ORIENTED_EDGE('',*,*,#164835,.T.); +#164835 = EDGE_CURVE('',#164827,#164836,#164838,.T.); +#164836 = VERTEX_POINT('',#164837); +#164837 = CARTESIAN_POINT('',(84.224695,-102.457143,1.585)); +#164838 = LINE('',#164839,#164840); +#164839 = CARTESIAN_POINT('',(85.342054,-102.454261,1.585)); +#164840 = VECTOR('',#164841,1.); +#164841 = DIRECTION('',(-0.999996673632,-2.579287778956E-03,0.)); +#164842 = ORIENTED_EDGE('',*,*,#164843,.T.); +#164843 = EDGE_CURVE('',#164836,#164844,#164846,.T.); +#164844 = VERTEX_POINT('',#164845); +#164845 = CARTESIAN_POINT('',(84.224695,-103.642857,1.585)); +#164846 = LINE('',#164847,#164848); +#164847 = CARTESIAN_POINT('',(84.224695,-102.457143,1.585)); +#164848 = VECTOR('',#164849,1.); +#164849 = DIRECTION('',(0.,-1.,0.)); +#164850 = ORIENTED_EDGE('',*,*,#164851,.T.); +#164851 = EDGE_CURVE('',#164844,#164852,#164854,.T.); +#164852 = VERTEX_POINT('',#164853); +#164853 = CARTESIAN_POINT('',(85.342054,-103.645739,1.585)); +#164854 = LINE('',#164855,#164856); +#164855 = CARTESIAN_POINT('',(84.224695,-103.642857,1.585)); +#164856 = VECTOR('',#164857,1.); +#164857 = DIRECTION('',(0.999996673632,-2.579287778956E-03,0.)); +#164858 = ORIENTED_EDGE('',*,*,#164859,.T.); +#164859 = EDGE_CURVE('',#164852,#164860,#164862,.T.); +#164860 = VERTEX_POINT('',#164861); +#164861 = CARTESIAN_POINT('',(85.342054,-103.939975,1.585)); +#164862 = CIRCLE('',#164863,0.150000292066); +#164863 = AXIS2_PLACEMENT_3D('',#164864,#164865,#164866); +#164864 = CARTESIAN_POINT('',(85.31279,-103.792857,1.585)); +#164865 = DIRECTION('',(0.,0.,-1.)); +#164866 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#164867 = ORIENTED_EDGE('',*,*,#164868,.T.); +#164868 = EDGE_CURVE('',#164860,#164869,#164871,.T.); +#164869 = VERTEX_POINT('',#164870); +#164870 = CARTESIAN_POINT('',(82.683526,-103.939975,1.585)); +#164871 = LINE('',#164872,#164873); +#164872 = CARTESIAN_POINT('',(85.342054,-103.939975,1.585)); +#164873 = VECTOR('',#164874,1.); +#164874 = DIRECTION('',(-1.,0.,0.)); +#164875 = ORIENTED_EDGE('',*,*,#164876,.T.); +#164876 = EDGE_CURVE('',#164869,#164877,#164879,.T.); +#164877 = VERTEX_POINT('',#164878); +#164878 = CARTESIAN_POINT('',(82.683526,-103.645739,1.585)); +#164879 = CIRCLE('',#164880,0.150000292066); +#164880 = AXIS2_PLACEMENT_3D('',#164881,#164882,#164883); +#164881 = CARTESIAN_POINT('',(82.71279,-103.792857,1.585)); +#164882 = DIRECTION('',(0.,0.,-1.)); +#164883 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#164884 = ORIENTED_EDGE('',*,*,#164885,.T.); +#164885 = EDGE_CURVE('',#164877,#164886,#164888,.T.); +#164886 = VERTEX_POINT('',#164887); +#164887 = CARTESIAN_POINT('',(83.924695,-103.642857,1.585)); +#164888 = LINE('',#164889,#164890); +#164889 = CARTESIAN_POINT('',(82.683526,-103.645739,1.585)); +#164890 = VECTOR('',#164891,1.); +#164891 = DIRECTION('',(0.999997304158,2.321998237617E-03,0.)); +#164892 = ORIENTED_EDGE('',*,*,#164893,.T.); +#164893 = EDGE_CURVE('',#164886,#164894,#164896,.T.); +#164894 = VERTEX_POINT('',#164895); +#164895 = CARTESIAN_POINT('',(83.924695,-102.457143,1.585)); +#164896 = LINE('',#164897,#164898); +#164897 = CARTESIAN_POINT('',(83.924695,-103.642857,1.585)); +#164898 = VECTOR('',#164899,1.); +#164899 = DIRECTION('',(0.,1.,0.)); +#164900 = ORIENTED_EDGE('',*,*,#164901,.T.); +#164901 = EDGE_CURVE('',#164894,#164808,#164902,.T.); +#164902 = LINE('',#164903,#164904); +#164903 = CARTESIAN_POINT('',(83.924695,-102.457143,1.585)); +#164904 = VECTOR('',#164905,1.); +#164905 = DIRECTION('',(-0.999997304158,2.321998237617E-03,0.)); +#164906 = PLANE('',#164907); +#164907 = AXIS2_PLACEMENT_3D('',#164908,#164909,#164910); +#164908 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164909 = DIRECTION('',(0.,0.,1.)); +#164910 = DIRECTION('',(1.,0.,-0.)); +#164911 = SHELL_BASED_SURFACE_MODEL('',(#164912)); +#164912 = OPEN_SHELL('',(#164913)); +#164913 = ADVANCED_FACE('',(#164914),#164950,.T.); +#164914 = FACE_BOUND('',#164915,.F.); +#164915 = EDGE_LOOP('',(#164916,#164927,#164935,#164944)); +#164916 = ORIENTED_EDGE('',*,*,#164917,.T.); +#164917 = EDGE_CURVE('',#164918,#164920,#164922,.T.); +#164918 = VERTEX_POINT('',#164919); +#164919 = CARTESIAN_POINT('',(134.754392,-103.8606,1.585)); +#164920 = VERTEX_POINT('',#164921); +#164921 = CARTESIAN_POINT('',(134.754392,-103.7406,1.585)); +#164922 = CIRCLE('',#164923,6.000000000043E-02); +#164923 = AXIS2_PLACEMENT_3D('',#164924,#164925,#164926); +#164924 = CARTESIAN_POINT('',(134.75439177441,-103.8006,1.585)); +#164925 = DIRECTION('',(0.,0.,-1.)); +#164926 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#164927 = ORIENTED_EDGE('',*,*,#164928,.T.); +#164928 = EDGE_CURVE('',#164920,#164929,#164931,.T.); +#164929 = VERTEX_POINT('',#164930); +#164930 = CARTESIAN_POINT('',(135.228908,-103.7406,1.585)); +#164931 = LINE('',#164932,#164933); +#164932 = CARTESIAN_POINT('',(134.754392,-103.7406,1.585)); +#164933 = VECTOR('',#164934,1.); +#164934 = DIRECTION('',(1.,0.,0.)); +#164935 = ORIENTED_EDGE('',*,*,#164936,.T.); +#164936 = EDGE_CURVE('',#164929,#164937,#164939,.T.); +#164937 = VERTEX_POINT('',#164938); +#164938 = CARTESIAN_POINT('',(135.228908,-103.8606,1.585)); +#164939 = CIRCLE('',#164940,6.000000000043E-02); +#164940 = AXIS2_PLACEMENT_3D('',#164941,#164942,#164943); +#164941 = CARTESIAN_POINT('',(135.22890822558,-103.8006,1.585)); +#164942 = DIRECTION('',(0.,0.,-1.)); +#164943 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#164944 = ORIENTED_EDGE('',*,*,#164945,.T.); +#164945 = EDGE_CURVE('',#164937,#164918,#164946,.T.); +#164946 = LINE('',#164947,#164948); +#164947 = CARTESIAN_POINT('',(135.228908,-103.8606,1.585)); +#164948 = VECTOR('',#164949,1.); +#164949 = DIRECTION('',(-1.,0.,0.)); +#164950 = PLANE('',#164951); +#164951 = AXIS2_PLACEMENT_3D('',#164952,#164953,#164954); +#164952 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164953 = DIRECTION('',(0.,0.,1.)); +#164954 = DIRECTION('',(1.,0.,-0.)); +#164955 = SHELL_BASED_SURFACE_MODEL('',(#164956)); +#164956 = OPEN_SHELL('',(#164957)); +#164957 = ADVANCED_FACE('',(#164958),#164994,.T.); +#164958 = FACE_BOUND('',#164959,.F.); +#164959 = EDGE_LOOP('',(#164960,#164971,#164979,#164988)); +#164960 = ORIENTED_EDGE('',*,*,#164961,.T.); +#164961 = EDGE_CURVE('',#164962,#164964,#164966,.T.); +#164962 = VERTEX_POINT('',#164963); +#164963 = CARTESIAN_POINT('',(130.730398,-103.6481,1.585)); +#164964 = VERTEX_POINT('',#164965); +#164965 = CARTESIAN_POINT('',(130.730398,-103.5281,1.585)); +#164966 = CIRCLE('',#164967,6.000000000042E-02); +#164967 = AXIS2_PLACEMENT_3D('',#164968,#164969,#164970); +#164968 = CARTESIAN_POINT('',(130.73039777441,-103.5881,1.585)); +#164969 = DIRECTION('',(0.,0.,-1.)); +#164970 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#164971 = ORIENTED_EDGE('',*,*,#164972,.T.); +#164972 = EDGE_CURVE('',#164964,#164973,#164975,.T.); +#164973 = VERTEX_POINT('',#164974); +#164974 = CARTESIAN_POINT('',(131.252902,-103.5281,1.585)); +#164975 = LINE('',#164976,#164977); +#164976 = CARTESIAN_POINT('',(130.730398,-103.5281,1.585)); +#164977 = VECTOR('',#164978,1.); +#164978 = DIRECTION('',(1.,0.,0.)); +#164979 = ORIENTED_EDGE('',*,*,#164980,.T.); +#164980 = EDGE_CURVE('',#164973,#164981,#164983,.T.); +#164981 = VERTEX_POINT('',#164982); +#164982 = CARTESIAN_POINT('',(131.252902,-103.6481,1.585)); +#164983 = CIRCLE('',#164984,6.000000000043E-02); +#164984 = AXIS2_PLACEMENT_3D('',#164985,#164986,#164987); +#164985 = CARTESIAN_POINT('',(131.25290222558,-103.5881,1.585)); +#164986 = DIRECTION('',(0.,0.,-1.)); +#164987 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#164988 = ORIENTED_EDGE('',*,*,#164989,.T.); +#164989 = EDGE_CURVE('',#164981,#164962,#164990,.T.); +#164990 = LINE('',#164991,#164992); +#164991 = CARTESIAN_POINT('',(131.252902,-103.6481,1.585)); +#164992 = VECTOR('',#164993,1.); +#164993 = DIRECTION('',(-1.,0.,0.)); +#164994 = PLANE('',#164995); +#164995 = AXIS2_PLACEMENT_3D('',#164996,#164997,#164998); +#164996 = CARTESIAN_POINT('',(0.,0.,1.585)); +#164997 = DIRECTION('',(0.,0.,1.)); +#164998 = DIRECTION('',(1.,0.,-0.)); +#164999 = SHELL_BASED_SURFACE_MODEL('',(#165000)); +#165000 = OPEN_SHELL('',(#165001)); +#165001 = ADVANCED_FACE('',(#165002),#165145,.T.); +#165002 = FACE_BOUND('',#165003,.F.); +#165003 = EDGE_LOOP('',(#165004,#165015,#165023,#165031,#165040,#165048, + #165056,#165065,#165073,#165082,#165090,#165098,#165106,#165115, + #165123,#165131,#165139)); +#165004 = ORIENTED_EDGE('',*,*,#165005,.T.); +#165005 = EDGE_CURVE('',#165006,#165008,#165010,.T.); +#165006 = VERTEX_POINT('',#165007); +#165007 = CARTESIAN_POINT('',(200.451467,-102.853597,1.585)); +#165008 = VERTEX_POINT('',#165009); +#165009 = CARTESIAN_POINT('',(200.568135,-102.915957,1.585)); +#165010 = CIRCLE('',#165011,7.500000000003E-02); +#165011 = AXIS2_PLACEMENT_3D('',#165012,#165013,#165014); +#165012 = CARTESIAN_POINT('',(200.493135,-102.9159570655,1.585)); +#165013 = DIRECTION('',(0.,0.,-1.)); +#165014 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#165015 = ORIENTED_EDGE('',*,*,#165016,.T.); +#165016 = EDGE_CURVE('',#165008,#165017,#165019,.T.); +#165017 = VERTEX_POINT('',#165018); +#165018 = CARTESIAN_POINT('',(200.568135,-102.983814,1.585)); +#165019 = LINE('',#165020,#165021); +#165020 = CARTESIAN_POINT('',(200.568135,-102.915957,1.585)); +#165021 = VECTOR('',#165022,1.); +#165022 = DIRECTION('',(0.,-1.,0.)); +#165023 = ORIENTED_EDGE('',*,*,#165024,.T.); +#165024 = EDGE_CURVE('',#165017,#165025,#165027,.T.); +#165025 = VERTEX_POINT('',#165026); +#165026 = CARTESIAN_POINT('',(200.841101,-102.985255,1.585)); +#165027 = LINE('',#165028,#165029); +#165028 = CARTESIAN_POINT('',(200.568135,-102.983814,1.585)); +#165029 = VECTOR('',#165030,1.); +#165030 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#165031 = ORIENTED_EDGE('',*,*,#165032,.T.); +#165032 = EDGE_CURVE('',#165025,#165033,#165035,.T.); +#165033 = VERTEX_POINT('',#165034); +#165034 = CARTESIAN_POINT('',(200.826469,-103.133814,1.585)); +#165035 = CIRCLE('',#165036,7.500006711464E-02); +#165036 = AXIS2_PLACEMENT_3D('',#165037,#165038,#165039); +#165037 = CARTESIAN_POINT('',(200.82646906711,-103.0588139328,1.585)); +#165038 = DIRECTION('',(0.,0.,-1.)); +#165039 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#165040 = ORIENTED_EDGE('',*,*,#165041,.T.); +#165041 = EDGE_CURVE('',#165033,#165042,#165044,.T.); +#165042 = VERTEX_POINT('',#165043); +#165043 = CARTESIAN_POINT('',(200.568135,-103.133814,1.585)); +#165044 = LINE('',#165045,#165046); +#165045 = CARTESIAN_POINT('',(200.826469,-103.133814,1.585)); +#165046 = VECTOR('',#165047,1.); +#165047 = DIRECTION('',(-1.,0.,0.)); +#165048 = ORIENTED_EDGE('',*,*,#165049,.T.); +#165049 = EDGE_CURVE('',#165042,#165050,#165052,.T.); +#165050 = VERTEX_POINT('',#165051); +#165051 = CARTESIAN_POINT('',(200.566694,-103.549636,1.585)); +#165052 = LINE('',#165053,#165054); +#165053 = CARTESIAN_POINT('',(200.568135,-103.133814,1.585)); +#165054 = VECTOR('',#165055,1.); +#165055 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#165056 = ORIENTED_EDGE('',*,*,#165057,.T.); +#165057 = EDGE_CURVE('',#165050,#165058,#165060,.T.); +#165058 = VERTEX_POINT('',#165059); +#165059 = CARTESIAN_POINT('',(200.469417,-103.606155,1.585)); +#165060 = CIRCLE('',#165061,7.500041328202E-02); +#165061 = AXIS2_PLACEMENT_3D('',#165062,#165063,#165064); +#165062 = CARTESIAN_POINT('',(200.49313481481,-103.5350035611,1.585)); +#165063 = DIRECTION('',(0.,0.,-1.)); +#165064 = DIRECTION('',(0.980783731279,-0.195098109828,0.)); +#165065 = ORIENTED_EDGE('',*,*,#165066,.T.); +#165066 = EDGE_CURVE('',#165058,#165067,#165069,.T.); +#165067 = VERTEX_POINT('',#165068); +#165068 = CARTESIAN_POINT('',(199.741707,-103.362066,1.585)); +#165069 = LINE('',#165070,#165071); +#165070 = CARTESIAN_POINT('',(200.469417,-103.606155,1.585)); +#165071 = VECTOR('',#165072,1.); +#165072 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#165073 = ORIENTED_EDGE('',*,*,#165074,.T.); +#165074 = EDGE_CURVE('',#165067,#165075,#165077,.T.); +#165075 = VERTEX_POINT('',#165076); +#165076 = CARTESIAN_POINT('',(199.802567,-103.225758,1.585)); +#165077 = CIRCLE('',#165078,7.500001519552E-02); +#165078 = AXIS2_PLACEMENT_3D('',#165079,#165080,#165081); +#165079 = CARTESIAN_POINT('',(199.77885009996,-103.2969093241,1.585)); +#165080 = DIRECTION('',(0.,0.,-1.)); +#165081 = DIRECTION('',(-0.4952412325,-0.868755501641,-0.)); +#165082 = ORIENTED_EDGE('',*,*,#165083,.T.); +#165083 = EDGE_CURVE('',#165075,#165084,#165086,.T.); +#165084 = VERTEX_POINT('',#165085); +#165085 = CARTESIAN_POINT('',(200.418135,-103.430947,1.585)); +#165086 = LINE('',#165087,#165088); +#165087 = CARTESIAN_POINT('',(199.802567,-103.225758,1.585)); +#165088 = VECTOR('',#165089,1.); +#165089 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#165090 = ORIENTED_EDGE('',*,*,#165091,.T.); +#165091 = EDGE_CURVE('',#165084,#165092,#165094,.T.); +#165092 = VERTEX_POINT('',#165093); +#165093 = CARTESIAN_POINT('',(200.418135,-103.133814,1.585)); +#165094 = LINE('',#165095,#165096); +#165095 = CARTESIAN_POINT('',(200.418135,-103.430947,1.585)); +#165096 = VECTOR('',#165097,1.); +#165097 = DIRECTION('',(0.,1.,0.)); +#165098 = ORIENTED_EDGE('',*,*,#165099,.T.); +#165099 = EDGE_CURVE('',#165092,#165100,#165102,.T.); +#165100 = VERTEX_POINT('',#165101); +#165101 = CARTESIAN_POINT('',(200.14517,-103.132373,1.585)); +#165102 = LINE('',#165103,#165104); +#165103 = CARTESIAN_POINT('',(200.418135,-103.133814,1.585)); +#165104 = VECTOR('',#165105,1.); +#165105 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#165106 = ORIENTED_EDGE('',*,*,#165107,.T.); +#165107 = EDGE_CURVE('',#165100,#165108,#165110,.T.); +#165108 = VERTEX_POINT('',#165109); +#165109 = CARTESIAN_POINT('',(200.159802,-102.983814,1.585)); +#165110 = CIRCLE('',#165111,7.500006711464E-02); +#165111 = AXIS2_PLACEMENT_3D('',#165112,#165113,#165114); +#165112 = CARTESIAN_POINT('',(200.15980193288,-103.0588140671,1.585)); +#165113 = DIRECTION('',(0.,0.,-1.)); +#165114 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#165115 = ORIENTED_EDGE('',*,*,#165116,.T.); +#165116 = EDGE_CURVE('',#165108,#165117,#165119,.T.); +#165117 = VERTEX_POINT('',#165118); +#165118 = CARTESIAN_POINT('',(200.418135,-102.983814,1.585)); +#165119 = LINE('',#165120,#165121); +#165120 = CARTESIAN_POINT('',(200.159802,-102.983814,1.585)); +#165121 = VECTOR('',#165122,1.); +#165122 = DIRECTION('',(1.,0.,0.)); +#165123 = ORIENTED_EDGE('',*,*,#165124,.T.); +#165124 = EDGE_CURVE('',#165117,#165125,#165127,.T.); +#165125 = VERTEX_POINT('',#165126); +#165126 = CARTESIAN_POINT('',(200.419576,-102.901325,1.585)); +#165127 = LINE('',#165128,#165129); +#165128 = CARTESIAN_POINT('',(200.418135,-102.983814,1.585)); +#165129 = VECTOR('',#165130,1.); +#165130 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#165131 = ORIENTED_EDGE('',*,*,#165132,.T.); +#165132 = EDGE_CURVE('',#165125,#165133,#165135,.T.); +#165133 = VERTEX_POINT('',#165134); +#165134 = CARTESIAN_POINT('',(200.430775,-102.874289,1.585)); +#165135 = LINE('',#165136,#165137); +#165136 = CARTESIAN_POINT('',(200.419576,-102.901325,1.585)); +#165137 = VECTOR('',#165138,1.); +#165138 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#165139 = ORIENTED_EDGE('',*,*,#165140,.T.); +#165140 = EDGE_CURVE('',#165133,#165006,#165141,.T.); +#165141 = LINE('',#165142,#165143); +#165142 = CARTESIAN_POINT('',(200.430775,-102.874289,1.585)); +#165143 = VECTOR('',#165144,1.); +#165144 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#165145 = PLANE('',#165146); +#165146 = AXIS2_PLACEMENT_3D('',#165147,#165148,#165149); +#165147 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165148 = DIRECTION('',(0.,0.,1.)); +#165149 = DIRECTION('',(1.,0.,-0.)); +#165150 = SHELL_BASED_SURFACE_MODEL('',(#165151)); +#165151 = OPEN_SHELL('',(#165152)); +#165152 = ADVANCED_FACE('',(#165153),#165197,.T.); +#165153 = FACE_BOUND('',#165154,.F.); +#165154 = EDGE_LOOP('',(#165155,#165166,#165174,#165183,#165191)); +#165155 = ORIENTED_EDGE('',*,*,#165156,.T.); +#165156 = EDGE_CURVE('',#165157,#165159,#165161,.T.); +#165157 = VERTEX_POINT('',#165158); +#165158 = CARTESIAN_POINT('',(197.901217,-102.988887,1.585)); +#165159 = VERTEX_POINT('',#165160); +#165160 = CARTESIAN_POINT('',(198.01665,-103.011848,1.585)); +#165161 = CIRCLE('',#165162,6.000007318647E-02); +#165162 = AXIS2_PLACEMENT_3D('',#165163,#165164,#165165); +#165163 = CARTESIAN_POINT('',(197.95664992681,-103.0118478233,1.585)); +#165164 = DIRECTION('',(0.,0.,-1.)); +#165165 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#165166 = ORIENTED_EDGE('',*,*,#165167,.T.); +#165167 = EDGE_CURVE('',#165159,#165168,#165170,.T.); +#165168 = VERTEX_POINT('',#165169); +#165169 = CARTESIAN_POINT('',(198.01665,-103.534352,1.585)); +#165170 = LINE('',#165171,#165172); +#165171 = CARTESIAN_POINT('',(198.01665,-103.011848,1.585)); +#165172 = VECTOR('',#165173,1.); +#165173 = DIRECTION('',(0.,-1.,0.)); +#165174 = ORIENTED_EDGE('',*,*,#165175,.T.); +#165175 = EDGE_CURVE('',#165168,#165176,#165178,.T.); +#165176 = VERTEX_POINT('',#165177); +#165177 = CARTESIAN_POINT('',(197.89665,-103.534352,1.585)); +#165178 = CIRCLE('',#165179,6.000000000042E-02); +#165179 = AXIS2_PLACEMENT_3D('',#165180,#165181,#165182); +#165180 = CARTESIAN_POINT('',(197.95665,-103.5343522255,1.585)); +#165181 = DIRECTION('',(0.,0.,-1.)); +#165182 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#165183 = ORIENTED_EDGE('',*,*,#165184,.T.); +#165184 = EDGE_CURVE('',#165176,#165185,#165187,.T.); +#165185 = VERTEX_POINT('',#165186); +#165186 = CARTESIAN_POINT('',(197.89665,-103.011848,1.585)); +#165187 = LINE('',#165188,#165189); +#165188 = CARTESIAN_POINT('',(197.89665,-103.534352,1.585)); +#165189 = VECTOR('',#165190,1.); +#165190 = DIRECTION('',(0.,1.,0.)); +#165191 = ORIENTED_EDGE('',*,*,#165192,.T.); +#165192 = EDGE_CURVE('',#165185,#165157,#165193,.T.); +#165193 = LINE('',#165194,#165195); +#165194 = CARTESIAN_POINT('',(197.89665,-103.011848,1.585)); +#165195 = VECTOR('',#165196,1.); +#165196 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#165197 = PLANE('',#165198); +#165198 = AXIS2_PLACEMENT_3D('',#165199,#165200,#165201); +#165199 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165200 = DIRECTION('',(0.,0.,1.)); +#165201 = DIRECTION('',(1.,0.,-0.)); +#165202 = SHELL_BASED_SURFACE_MODEL('',(#165203)); +#165203 = OPEN_SHELL('',(#165204)); +#165204 = ADVANCED_FACE('',(#165205),#165249,.T.); +#165205 = FACE_BOUND('',#165206,.F.); +#165206 = EDGE_LOOP('',(#165207,#165218,#165226,#165235,#165243)); +#165207 = ORIENTED_EDGE('',*,*,#165208,.T.); +#165208 = EDGE_CURVE('',#165209,#165211,#165213,.T.); +#165209 = VERTEX_POINT('',#165210); +#165210 = CARTESIAN_POINT('',(199.371217,-102.988887,1.585)); +#165211 = VERTEX_POINT('',#165212); +#165212 = CARTESIAN_POINT('',(199.48665,-103.011848,1.585)); +#165213 = CIRCLE('',#165214,6.000007318647E-02); +#165214 = AXIS2_PLACEMENT_3D('',#165215,#165216,#165217); +#165215 = CARTESIAN_POINT('',(199.42664992681,-103.0118478233,1.585)); +#165216 = DIRECTION('',(0.,0.,-1.)); +#165217 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#165218 = ORIENTED_EDGE('',*,*,#165219,.T.); +#165219 = EDGE_CURVE('',#165211,#165220,#165222,.T.); +#165220 = VERTEX_POINT('',#165221); +#165221 = CARTESIAN_POINT('',(199.48665,-103.534352,1.585)); +#165222 = LINE('',#165223,#165224); +#165223 = CARTESIAN_POINT('',(199.48665,-103.011848,1.585)); +#165224 = VECTOR('',#165225,1.); +#165225 = DIRECTION('',(0.,-1.,0.)); +#165226 = ORIENTED_EDGE('',*,*,#165227,.T.); +#165227 = EDGE_CURVE('',#165220,#165228,#165230,.T.); +#165228 = VERTEX_POINT('',#165229); +#165229 = CARTESIAN_POINT('',(199.36665,-103.534352,1.585)); +#165230 = CIRCLE('',#165231,6.000000000042E-02); +#165231 = AXIS2_PLACEMENT_3D('',#165232,#165233,#165234); +#165232 = CARTESIAN_POINT('',(199.42665,-103.5343522255,1.585)); +#165233 = DIRECTION('',(0.,0.,-1.)); +#165234 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#165235 = ORIENTED_EDGE('',*,*,#165236,.T.); +#165236 = EDGE_CURVE('',#165228,#165237,#165239,.T.); +#165237 = VERTEX_POINT('',#165238); +#165238 = CARTESIAN_POINT('',(199.36665,-103.011848,1.585)); +#165239 = LINE('',#165240,#165241); +#165240 = CARTESIAN_POINT('',(199.36665,-103.534352,1.585)); +#165241 = VECTOR('',#165242,1.); +#165242 = DIRECTION('',(0.,1.,0.)); +#165243 = ORIENTED_EDGE('',*,*,#165244,.T.); +#165244 = EDGE_CURVE('',#165237,#165209,#165245,.T.); +#165245 = LINE('',#165246,#165247); +#165246 = CARTESIAN_POINT('',(199.36665,-103.011848,1.585)); +#165247 = VECTOR('',#165248,1.); +#165248 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#165249 = PLANE('',#165250); +#165250 = AXIS2_PLACEMENT_3D('',#165251,#165252,#165253); +#165251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165252 = DIRECTION('',(0.,0.,1.)); +#165253 = DIRECTION('',(1.,0.,-0.)); +#165254 = SHELL_BASED_SURFACE_MODEL('',(#165255)); +#165255 = OPEN_SHELL('',(#165256)); +#165256 = ADVANCED_FACE('',(#165257,#165368),#165420,.T.); +#165257 = FACE_BOUND('',#165258,.F.); +#165258 = EDGE_LOOP('',(#165259,#165270,#165278,#165287,#165295,#165304, + #165312,#165320,#165329,#165337,#165345,#165353,#165362)); +#165259 = ORIENTED_EDGE('',*,*,#165260,.T.); +#165260 = EDGE_CURVE('',#165261,#165263,#165265,.T.); +#165261 = VERTEX_POINT('',#165262); +#165262 = CARTESIAN_POINT('',(133.703805,-102.333287,1.585)); +#165263 = VERTEX_POINT('',#165264); +#165264 = CARTESIAN_POINT('',(133.777364,-102.272919,1.585)); +#165265 = CIRCLE('',#165266,7.500074938989E-02); +#165266 = AXIS2_PLACEMENT_3D('',#165267,#165268,#165269); +#165267 = CARTESIAN_POINT('',(133.77736446611,-102.3479197493,1.585)); +#165268 = DIRECTION('',(0.,0.,-1.)); +#165269 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#165270 = ORIENTED_EDGE('',*,*,#165271,.T.); +#165271 = EDGE_CURVE('',#165263,#165272,#165274,.T.); +#165272 = VERTEX_POINT('',#165273); +#165273 = CARTESIAN_POINT('',(134.172948,-102.27436,1.585)); +#165274 = LINE('',#165275,#165276); +#165275 = CARTESIAN_POINT('',(133.777364,-102.272919,1.585)); +#165276 = VECTOR('',#165277,1.); +#165277 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#165278 = ORIENTED_EDGE('',*,*,#165279,.T.); +#165279 = EDGE_CURVE('',#165272,#165280,#165282,.T.); +#165280 = VERTEX_POINT('',#165281); +#165281 = CARTESIAN_POINT('',(134.422351,-102.523763,1.585)); +#165282 = CIRCLE('',#165283,0.347870264855); +#165283 = AXIS2_PLACEMENT_3D('',#165284,#165285,#165286); +#165284 = CARTESIAN_POINT('',(134.08562026502,-102.6110907349,1.585)); +#165285 = DIRECTION('',(0.,0.,-1.)); +#165286 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#165287 = ORIENTED_EDGE('',*,*,#165288,.T.); +#165288 = EDGE_CURVE('',#165280,#165289,#165291,.T.); +#165289 = VERTEX_POINT('',#165290); +#165290 = CARTESIAN_POINT('',(134.421129,-102.701062,1.585)); +#165291 = LINE('',#165292,#165293); +#165292 = CARTESIAN_POINT('',(134.422351,-102.523763,1.585)); +#165293 = VECTOR('',#165294,1.); +#165294 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#165295 = ORIENTED_EDGE('',*,*,#165296,.T.); +#165296 = EDGE_CURVE('',#165289,#165297,#165299,.T.); +#165297 = VERTEX_POINT('',#165298); +#165298 = CARTESIAN_POINT('',(134.172948,-102.945287,1.585)); +#165299 = CIRCLE('',#165300,0.348632345848); +#165300 = AXIS2_PLACEMENT_3D('',#165301,#165302,#165303); +#165301 = CARTESIAN_POINT('',(134.08517919403,-102.6078834593,1.585)); +#165302 = DIRECTION('',(0.,0.,-1.)); +#165303 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#165304 = ORIENTED_EDGE('',*,*,#165305,.T.); +#165305 = EDGE_CURVE('',#165297,#165306,#165308,.T.); +#165306 = VERTEX_POINT('',#165307); +#165307 = CARTESIAN_POINT('',(134.159431,-102.946618,1.585)); +#165308 = LINE('',#165309,#165310); +#165309 = CARTESIAN_POINT('',(134.172948,-102.945287,1.585)); +#165310 = VECTOR('',#165311,1.); +#165311 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#165312 = ORIENTED_EDGE('',*,*,#165313,.T.); +#165313 = EDGE_CURVE('',#165306,#165314,#165316,.T.); +#165314 = VERTEX_POINT('',#165315); +#165315 = CARTESIAN_POINT('',(134.417445,-103.317723,1.585)); +#165316 = LINE('',#165317,#165318); +#165317 = CARTESIAN_POINT('',(134.159431,-102.946618,1.585)); +#165318 = VECTOR('',#165319,1.); +#165319 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#165320 = ORIENTED_EDGE('',*,*,#165321,.T.); +#165321 = EDGE_CURVE('',#165314,#165322,#165324,.T.); +#165322 = VERTEX_POINT('',#165323); +#165323 = CARTESIAN_POINT('',(134.28735,-103.390929,1.585)); +#165324 = CIRCLE('',#165325,7.500005951702E-02); +#165325 = AXIS2_PLACEMENT_3D('',#165326,#165327,#165328); +#165326 = CARTESIAN_POINT('',(134.34879206294,-103.3479187473,1.585)); +#165327 = DIRECTION('',(0.,0.,-1.)); +#165328 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#165329 = ORIENTED_EDGE('',*,*,#165330,.T.); +#165330 = EDGE_CURVE('',#165322,#165331,#165333,.T.); +#165331 = VERTEX_POINT('',#165332); +#165332 = CARTESIAN_POINT('',(133.97641,-102.946728,1.585)); +#165333 = LINE('',#165334,#165335); +#165334 = CARTESIAN_POINT('',(134.28735,-103.390929,1.585)); +#165335 = VECTOR('',#165336,1.); +#165336 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#165337 = ORIENTED_EDGE('',*,*,#165338,.T.); +#165338 = EDGE_CURVE('',#165331,#165339,#165341,.T.); +#165339 = VERTEX_POINT('',#165340); +#165340 = CARTESIAN_POINT('',(133.852364,-102.946728,1.585)); +#165341 = LINE('',#165342,#165343); +#165342 = CARTESIAN_POINT('',(133.97641,-102.946728,1.585)); +#165343 = VECTOR('',#165344,1.); +#165344 = DIRECTION('',(-1.,0.,0.)); +#165345 = ORIENTED_EDGE('',*,*,#165346,.T.); +#165346 = EDGE_CURVE('',#165339,#165347,#165349,.T.); +#165347 = VERTEX_POINT('',#165348); +#165348 = CARTESIAN_POINT('',(133.850923,-103.362551,1.585)); +#165349 = LINE('',#165350,#165351); +#165350 = CARTESIAN_POINT('',(133.852364,-102.946728,1.585)); +#165351 = VECTOR('',#165352,1.); +#165352 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#165353 = ORIENTED_EDGE('',*,*,#165354,.T.); +#165354 = EDGE_CURVE('',#165347,#165355,#165357,.T.); +#165355 = VERTEX_POINT('',#165356); +#165356 = CARTESIAN_POINT('',(133.702364,-103.347919,1.585)); +#165357 = CIRCLE('',#165358,7.500006711464E-02); +#165358 = AXIS2_PLACEMENT_3D('',#165359,#165360,#165361); +#165359 = CARTESIAN_POINT('',(133.77736406711,-103.3479190671,1.585)); +#165360 = DIRECTION('',(-0.,0.,-1.)); +#165361 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#165362 = ORIENTED_EDGE('',*,*,#165363,.T.); +#165363 = EDGE_CURVE('',#165355,#165261,#165364,.T.); +#165364 = LINE('',#165365,#165366); +#165365 = CARTESIAN_POINT('',(133.702364,-103.347919,1.585)); +#165366 = VECTOR('',#165367,1.); +#165367 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#165368 = FACE_BOUND('',#165369,.F.); +#165369 = EDGE_LOOP('',(#165370,#165381,#165389,#165397,#165405,#165414) + ); +#165370 = ORIENTED_EDGE('',*,*,#165371,.T.); +#165371 = EDGE_CURVE('',#165372,#165374,#165376,.T.); +#165372 = VERTEX_POINT('',#165373); +#165373 = CARTESIAN_POINT('',(134.273792,-102.5561,1.585)); +#165374 = VERTEX_POINT('',#165375); +#165375 = CARTESIAN_POINT('',(134.140611,-102.422919,1.585)); +#165376 = CIRCLE('',#165377,0.18686440374); +#165377 = AXIS2_PLACEMENT_3D('',#165378,#165379,#165380); +#165378 = CARTESIAN_POINT('',(134.093075,-102.603636,1.585)); +#165379 = DIRECTION('',(0.,0.,1.)); +#165380 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#165381 = ORIENTED_EDGE('',*,*,#165382,.T.); +#165382 = EDGE_CURVE('',#165374,#165383,#165385,.T.); +#165383 = VERTEX_POINT('',#165384); +#165384 = CARTESIAN_POINT('',(133.852364,-102.422919,1.585)); +#165385 = LINE('',#165386,#165387); +#165386 = CARTESIAN_POINT('',(134.140611,-102.422919,1.585)); +#165387 = VECTOR('',#165388,1.); +#165388 = DIRECTION('',(-1.,0.,0.)); +#165389 = ORIENTED_EDGE('',*,*,#165390,.T.); +#165390 = EDGE_CURVE('',#165383,#165391,#165393,.T.); +#165391 = VERTEX_POINT('',#165392); +#165392 = CARTESIAN_POINT('',(133.852364,-102.796728,1.585)); +#165393 = LINE('',#165394,#165395); +#165394 = CARTESIAN_POINT('',(133.852364,-102.422919,1.585)); +#165395 = VECTOR('',#165396,1.); +#165396 = DIRECTION('',(0.,-1.,0.)); +#165397 = ORIENTED_EDGE('',*,*,#165398,.T.); +#165398 = EDGE_CURVE('',#165391,#165399,#165401,.T.); +#165399 = VERTEX_POINT('',#165400); +#165400 = CARTESIAN_POINT('',(134.140611,-102.796728,1.585)); +#165401 = LINE('',#165402,#165403); +#165402 = CARTESIAN_POINT('',(133.852364,-102.796728,1.585)); +#165403 = VECTOR('',#165404,1.); +#165404 = DIRECTION('',(1.,0.,0.)); +#165405 = ORIENTED_EDGE('',*,*,#165406,.T.); +#165406 = EDGE_CURVE('',#165399,#165407,#165409,.T.); +#165407 = VERTEX_POINT('',#165408); +#165408 = CARTESIAN_POINT('',(134.273792,-102.663547,1.585)); +#165409 = CIRCLE('',#165410,0.18686440374); +#165410 = AXIS2_PLACEMENT_3D('',#165411,#165412,#165413); +#165411 = CARTESIAN_POINT('',(134.093075,-102.616011,1.585)); +#165412 = DIRECTION('',(0.,0.,1.)); +#165413 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#165414 = ORIENTED_EDGE('',*,*,#165415,.T.); +#165415 = EDGE_CURVE('',#165407,#165372,#165416,.T.); +#165416 = LINE('',#165417,#165418); +#165417 = CARTESIAN_POINT('',(134.273792,-102.663547,1.585)); +#165418 = VECTOR('',#165419,1.); +#165419 = DIRECTION('',(0.,1.,0.)); +#165420 = PLANE('',#165421); +#165421 = AXIS2_PLACEMENT_3D('',#165422,#165423,#165424); +#165422 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165423 = DIRECTION('',(0.,0.,1.)); +#165424 = DIRECTION('',(1.,0.,-0.)); +#165425 = SHELL_BASED_SURFACE_MODEL('',(#165426)); +#165426 = OPEN_SHELL('',(#165427)); +#165427 = ADVANCED_FACE('',(#165428),#165623,.T.); +#165428 = FACE_BOUND('',#165429,.F.); +#165429 = EDGE_LOOP('',(#165430,#165441,#165449,#165458,#165466,#165474, + #165482,#165490,#165499,#165507,#165516,#165524,#165532,#165540, + #165549,#165557,#165566,#165574,#165583,#165591,#165600,#165608, + #165617)); +#165430 = ORIENTED_EDGE('',*,*,#165431,.T.); +#165431 = EDGE_CURVE('',#165432,#165434,#165436,.T.); +#165432 = VERTEX_POINT('',#165433); +#165433 = CARTESIAN_POINT('',(134.705626,-102.32604,1.585)); +#165434 = VERTEX_POINT('',#165435); +#165435 = CARTESIAN_POINT('',(134.777364,-102.272919,1.585)); +#165436 = CIRCLE('',#165437,7.50033610077E-02); +#165437 = AXIS2_PLACEMENT_3D('',#165438,#165439,#165440); +#165438 = CARTESIAN_POINT('',(134.7773662707,-102.3479223609,1.585)); +#165439 = DIRECTION('',(0.,0.,-1.)); +#165440 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#165441 = ORIENTED_EDGE('',*,*,#165442,.T.); +#165442 = EDGE_CURVE('',#165434,#165443,#165445,.T.); +#165443 = VERTEX_POINT('',#165444); +#165444 = CARTESIAN_POINT('',(135.268186,-102.27436,1.585)); +#165445 = LINE('',#165446,#165447); +#165446 = CARTESIAN_POINT('',(134.777364,-102.272919,1.585)); +#165447 = VECTOR('',#165448,1.); +#165448 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#165449 = ORIENTED_EDGE('',*,*,#165450,.T.); +#165450 = EDGE_CURVE('',#165443,#165451,#165453,.T.); +#165451 = VERTEX_POINT('',#165452); +#165452 = CARTESIAN_POINT('',(135.253554,-102.422919,1.585)); +#165453 = CIRCLE('',#165454,7.500006711463E-02); +#165454 = AXIS2_PLACEMENT_3D('',#165455,#165456,#165457); +#165455 = CARTESIAN_POINT('',(135.25355406711,-102.3479189328,1.585)); +#165456 = DIRECTION('',(0.,0.,-1.)); +#165457 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#165458 = ORIENTED_EDGE('',*,*,#165459,.T.); +#165459 = EDGE_CURVE('',#165451,#165460,#165462,.T.); +#165460 = VERTEX_POINT('',#165461); +#165461 = CARTESIAN_POINT('',(134.845238,-102.422919,1.585)); +#165462 = LINE('',#165463,#165464); +#165463 = CARTESIAN_POINT('',(135.253554,-102.422919,1.585)); +#165464 = VECTOR('',#165465,1.); +#165465 = DIRECTION('',(-1.,0.,0.)); +#165466 = ORIENTED_EDGE('',*,*,#165467,.T.); +#165467 = EDGE_CURVE('',#165460,#165468,#165470,.T.); +#165468 = VERTEX_POINT('',#165469); +#165469 = CARTESIAN_POINT('',(134.820419,-102.671109,1.585)); +#165470 = LINE('',#165471,#165472); +#165471 = CARTESIAN_POINT('',(134.845238,-102.422919,1.585)); +#165472 = VECTOR('',#165473,1.); +#165473 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#165474 = ORIENTED_EDGE('',*,*,#165475,.T.); +#165475 = EDGE_CURVE('',#165468,#165476,#165478,.T.); +#165476 = VERTEX_POINT('',#165477); +#165477 = CARTESIAN_POINT('',(134.85797,-102.655312,1.585)); +#165478 = LINE('',#165479,#165480); +#165479 = CARTESIAN_POINT('',(134.820419,-102.671109,1.585)); +#165480 = VECTOR('',#165481,1.); +#165481 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#165482 = ORIENTED_EDGE('',*,*,#165483,.T.); +#165483 = EDGE_CURVE('',#165476,#165484,#165486,.T.); +#165484 = VERTEX_POINT('',#165485); +#165485 = CARTESIAN_POINT('',(135.130506,-102.656534,1.585)); +#165486 = LINE('',#165487,#165488); +#165487 = CARTESIAN_POINT('',(134.85797,-102.655312,1.585)); +#165488 = VECTOR('',#165489,1.); +#165489 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#165490 = ORIENTED_EDGE('',*,*,#165491,.T.); +#165491 = EDGE_CURVE('',#165484,#165492,#165494,.T.); +#165492 = VERTEX_POINT('',#165493); +#165493 = CARTESIAN_POINT('',(135.374732,-102.904715,1.585)); +#165494 = CIRCLE('',#165495,0.348625649748); +#165495 = AXIS2_PLACEMENT_3D('',#165496,#165497,#165498); +#165496 = CARTESIAN_POINT('',(135.03733404586,-102.9924786838,1.585)); +#165497 = DIRECTION('',(0.,0.,-1.)); +#165498 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#165499 = ORIENTED_EDGE('',*,*,#165500,.T.); +#165500 = EDGE_CURVE('',#165492,#165501,#165503,.T.); +#165501 = VERTEX_POINT('',#165502); +#165502 = CARTESIAN_POINT('',(135.37351,-103.177252,1.585)); +#165503 = LINE('',#165504,#165505); +#165504 = CARTESIAN_POINT('',(135.374732,-102.904715,1.585)); +#165505 = VECTOR('',#165506,1.); +#165506 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#165507 = ORIENTED_EDGE('',*,*,#165508,.T.); +#165508 = EDGE_CURVE('',#165501,#165509,#165511,.T.); +#165509 = VERTEX_POINT('',#165510); +#165510 = CARTESIAN_POINT('',(135.125329,-103.421478,1.585)); +#165511 = CIRCLE('',#165512,0.348635327447); +#165512 = AXIS2_PLACEMENT_3D('',#165513,#165514,#165515); +#165513 = CARTESIAN_POINT('',(135.03755748129,-103.0840720841,1.585)); +#165514 = DIRECTION('',(0.,0.,-1.)); +#165515 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#165516 = ORIENTED_EDGE('',*,*,#165517,.T.); +#165517 = EDGE_CURVE('',#165509,#165518,#165520,.T.); +#165518 = VERTEX_POINT('',#165519); +#165519 = CARTESIAN_POINT('',(134.852792,-103.420256,1.585)); +#165520 = LINE('',#165521,#165522); +#165521 = CARTESIAN_POINT('',(135.125329,-103.421478,1.585)); +#165522 = VECTOR('',#165523,1.); +#165523 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#165524 = ORIENTED_EDGE('',*,*,#165525,.T.); +#165525 = EDGE_CURVE('',#165518,#165526,#165528,.T.); +#165526 = VERTEX_POINT('',#165527); +#165527 = CARTESIAN_POINT('',(134.730079,-103.35805,1.585)); +#165528 = LINE('',#165529,#165530); +#165529 = CARTESIAN_POINT('',(134.852792,-103.420256,1.585)); +#165530 = VECTOR('',#165531,1.); +#165531 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#165532 = ORIENTED_EDGE('',*,*,#165533,.T.); +#165533 = EDGE_CURVE('',#165526,#165534,#165536,.T.); +#165534 = VERTEX_POINT('',#165535); +#165535 = CARTESIAN_POINT('',(134.667384,-103.294347,1.585)); +#165536 = LINE('',#165537,#165538); +#165537 = CARTESIAN_POINT('',(134.730079,-103.35805,1.585)); +#165538 = VECTOR('',#165539,1.); +#165539 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#165540 = ORIENTED_EDGE('',*,*,#165541,.T.); +#165541 = EDGE_CURVE('',#165534,#165542,#165544,.T.); +#165542 = VERTEX_POINT('',#165543); +#165543 = CARTESIAN_POINT('',(134.782779,-103.199648,1.585)); +#165544 = CIRCLE('',#165545,7.50001266804E-02); +#165545 = AXIS2_PLACEMENT_3D('',#165546,#165547,#165548); +#165546 = CARTESIAN_POINT('',(134.72974505199,-103.2526802483,1.585)); +#165547 = DIRECTION('',(0.,0.,-1.)); +#165548 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#165549 = ORIENTED_EDGE('',*,*,#165550,.T.); +#165550 = EDGE_CURVE('',#165542,#165551,#165553,.T.); +#165551 = VERTEX_POINT('',#165552); +#165552 = CARTESIAN_POINT('',(134.821791,-103.238661,1.585)); +#165553 = LINE('',#165554,#165555); +#165554 = CARTESIAN_POINT('',(134.782779,-103.199648,1.585)); +#165555 = VECTOR('',#165556,1.); +#165556 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#165557 = ORIENTED_EDGE('',*,*,#165558,.T.); +#165558 = EDGE_CURVE('',#165551,#165559,#165561,.T.); +#165559 = VERTEX_POINT('',#165560); +#165560 = CARTESIAN_POINT('',(135.161507,-103.238661,1.585)); +#165561 = CIRCLE('',#165562,0.305620374329); +#165562 = AXIS2_PLACEMENT_3D('',#165563,#165564,#165565); +#165563 = CARTESIAN_POINT('',(134.991649,-102.98459,1.585)); +#165564 = DIRECTION('',(0.,0.,1.)); +#165565 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#165566 = ORIENTED_EDGE('',*,*,#165567,.T.); +#165567 = EDGE_CURVE('',#165559,#165568,#165570,.T.); +#165568 = VERTEX_POINT('',#165569); +#165569 = CARTESIAN_POINT('',(135.191914,-103.208253,1.585)); +#165570 = LINE('',#165571,#165572); +#165571 = CARTESIAN_POINT('',(135.161507,-103.238661,1.585)); +#165572 = VECTOR('',#165573,1.); +#165573 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#165574 = ORIENTED_EDGE('',*,*,#165575,.T.); +#165575 = EDGE_CURVE('',#165568,#165576,#165578,.T.); +#165576 = VERTEX_POINT('',#165577); +#165577 = CARTESIAN_POINT('',(135.191915,-102.868536,1.585)); +#165578 = CIRCLE('',#165579,0.305616146029); +#165579 = AXIS2_PLACEMENT_3D('',#165580,#165581,#165582); +#165580 = CARTESIAN_POINT('',(134.93784892049,-103.0383937521,1.585)); +#165581 = DIRECTION('',(0.,-0.,1.)); +#165582 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#165583 = ORIENTED_EDGE('',*,*,#165584,.T.); +#165584 = EDGE_CURVE('',#165576,#165585,#165587,.T.); +#165585 = VERTEX_POINT('',#165586); +#165586 = CARTESIAN_POINT('',(135.161508,-102.838129,1.585)); +#165587 = LINE('',#165588,#165589); +#165588 = CARTESIAN_POINT('',(135.191915,-102.868536,1.585)); +#165589 = VECTOR('',#165590,1.); +#165590 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#165591 = ORIENTED_EDGE('',*,*,#165592,.T.); +#165592 = EDGE_CURVE('',#165585,#165593,#165595,.T.); +#165593 = VERTEX_POINT('',#165594); +#165594 = CARTESIAN_POINT('',(134.821791,-102.838129,1.585)); +#165595 = CIRCLE('',#165596,0.305621483548); +#165596 = AXIS2_PLACEMENT_3D('',#165597,#165598,#165599); +#165597 = CARTESIAN_POINT('',(134.9916495,-103.092201,1.585)); +#165598 = DIRECTION('',(0.,0.,1.)); +#165599 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#165600 = ORIENTED_EDGE('',*,*,#165601,.T.); +#165601 = EDGE_CURVE('',#165593,#165602,#165604,.T.); +#165602 = VERTEX_POINT('',#165603); +#165603 = CARTESIAN_POINT('',(134.765001,-102.890306,1.585)); +#165604 = LINE('',#165605,#165606); +#165605 = CARTESIAN_POINT('',(134.821791,-102.838129,1.585)); +#165606 = VECTOR('',#165607,1.); +#165607 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#165608 = ORIENTED_EDGE('',*,*,#165609,.T.); +#165609 = EDGE_CURVE('',#165602,#165610,#165612,.T.); +#165610 = VERTEX_POINT('',#165611); +#165611 = CARTESIAN_POINT('',(134.655095,-102.831349,1.585)); +#165612 = CIRCLE('',#165613,7.500024172472E-02); +#165613 = AXIS2_PLACEMENT_3D('',#165614,#165615,#165616); +#165614 = CARTESIAN_POINT('',(134.72974497002,-102.8241089561,1.585)); +#165615 = DIRECTION('',(-0.,0.,-1.)); +#165616 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#165617 = ORIENTED_EDGE('',*,*,#165618,.T.); +#165618 = EDGE_CURVE('',#165610,#165432,#165619,.T.); +#165619 = LINE('',#165620,#165621); +#165620 = CARTESIAN_POINT('',(134.655095,-102.831349,1.585)); +#165621 = VECTOR('',#165622,1.); +#165622 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#165623 = PLANE('',#165624); +#165624 = AXIS2_PLACEMENT_3D('',#165625,#165626,#165627); +#165625 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165626 = DIRECTION('',(0.,0.,1.)); +#165627 = DIRECTION('',(1.,0.,-0.)); +#165628 = SHELL_BASED_SURFACE_MODEL('',(#165629)); +#165629 = OPEN_SHELL('',(#165630)); +#165630 = ADVANCED_FACE('',(#165631,#165781,#165851),#165936,.T.); +#165631 = FACE_BOUND('',#165632,.F.); +#165632 = EDGE_LOOP('',(#165633,#165644,#165652,#165660,#165668,#165676, + #165684,#165692,#165701,#165709,#165718,#165726,#165735,#165743, + #165751,#165759,#165767,#165775)); +#165633 = ORIENTED_EDGE('',*,*,#165634,.T.); +#165634 = EDGE_CURVE('',#165635,#165637,#165639,.T.); +#165635 = VERTEX_POINT('',#165636); +#165636 = CARTESIAN_POINT('',(135.737523,-102.33242,1.585)); +#165637 = VERTEX_POINT('',#165638); +#165638 = CARTESIAN_POINT('',(136.205599,-102.337786,1.585)); +#165639 = CIRCLE('',#165640,0.397581403297); +#165640 = AXIS2_PLACEMENT_3D('',#165641,#165642,#165643); +#165641 = CARTESIAN_POINT('',(135.96787687062,-102.6564694816,1.585)); +#165642 = DIRECTION('',(0.,0.,-1.)); +#165643 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#165644 = ORIENTED_EDGE('',*,*,#165645,.T.); +#165645 = EDGE_CURVE('',#165637,#165646,#165648,.T.); +#165646 = VERTEX_POINT('',#165647); +#165647 = CARTESIAN_POINT('',(136.269052,-102.403316,1.585)); +#165648 = LINE('',#165649,#165650); +#165649 = CARTESIAN_POINT('',(136.205599,-102.337786,1.585)); +#165650 = VECTOR('',#165651,1.); +#165651 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#165652 = ORIENTED_EDGE('',*,*,#165653,.T.); +#165653 = EDGE_CURVE('',#165646,#165654,#165656,.T.); +#165654 = VERTEX_POINT('',#165655); +#165655 = CARTESIAN_POINT('',(136.327113,-102.523763,1.585)); +#165656 = LINE('',#165657,#165658); +#165657 = CARTESIAN_POINT('',(136.269052,-102.403316,1.585)); +#165658 = VECTOR('',#165659,1.); +#165659 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#165660 = ORIENTED_EDGE('',*,*,#165661,.T.); +#165661 = EDGE_CURVE('',#165654,#165662,#165664,.T.); +#165662 = VERTEX_POINT('',#165663); +#165663 = CARTESIAN_POINT('',(136.325891,-102.605824,1.585)); +#165664 = LINE('',#165665,#165666); +#165665 = CARTESIAN_POINT('',(136.327113,-102.523763,1.585)); +#165666 = VECTOR('',#165667,1.); +#165667 = DIRECTION('',(-1.48897104794E-02,-0.999889142116,0.)); +#165668 = ORIENTED_EDGE('',*,*,#165669,.T.); +#165669 = EDGE_CURVE('',#165662,#165670,#165672,.T.); +#165670 = VERTEX_POINT('',#165671); +#165671 = CARTESIAN_POINT('',(136.263686,-102.728535,1.585)); +#165672 = LINE('',#165673,#165674); +#165673 = CARTESIAN_POINT('',(136.325891,-102.605824,1.585)); +#165674 = VECTOR('',#165675,1.); +#165675 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#165676 = ORIENTED_EDGE('',*,*,#165677,.T.); +#165677 = EDGE_CURVE('',#165670,#165678,#165680,.T.); +#165678 = VERTEX_POINT('',#165679); +#165679 = CARTESIAN_POINT('',(136.216763,-102.77649,1.585)); +#165680 = LINE('',#165681,#165682); +#165681 = CARTESIAN_POINT('',(136.263686,-102.728535,1.585)); +#165682 = VECTOR('',#165683,1.); +#165683 = DIRECTION('',(-0.699374120429,-0.714755790234,0.)); +#165684 = ORIENTED_EDGE('',*,*,#165685,.T.); +#165685 = EDGE_CURVE('',#165678,#165686,#165688,.T.); +#165686 = VERTEX_POINT('',#165687); +#165687 = CARTESIAN_POINT('',(136.273017,-102.838187,1.585)); +#165688 = LINE('',#165689,#165690); +#165689 = CARTESIAN_POINT('',(136.216763,-102.77649,1.585)); +#165690 = VECTOR('',#165691,1.); +#165691 = DIRECTION('',(0.673759436039,-0.738950757729,0.)); +#165692 = ORIENTED_EDGE('',*,*,#165693,.T.); +#165693 = EDGE_CURVE('',#165686,#165694,#165696,.T.); +#165694 = VERTEX_POINT('',#165695); +#165695 = CARTESIAN_POINT('',(136.263686,-103.299963,1.585)); +#165696 = CIRCLE('',#165697,0.395774657874); +#165697 = AXIS2_PLACEMENT_3D('',#165698,#165699,#165700); +#165698 = CARTESIAN_POINT('',(135.94700374421,-103.0625816007,1.585)); +#165699 = DIRECTION('',(0.,0.,-1.)); +#165700 = DIRECTION('',(0.823734540094,0.566975667428,0.)); +#165701 = ORIENTED_EDGE('',*,*,#165702,.T.); +#165702 = EDGE_CURVE('',#165694,#165703,#165705,.T.); +#165703 = VERTEX_POINT('',#165704); +#165704 = CARTESIAN_POINT('',(136.198156,-103.363417,1.585)); +#165705 = LINE('',#165706,#165707); +#165706 = CARTESIAN_POINT('',(136.263686,-103.299963,1.585)); +#165707 = VECTOR('',#165708,1.); +#165708 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#165709 = ORIENTED_EDGE('',*,*,#165710,.T.); +#165710 = EDGE_CURVE('',#165703,#165711,#165713,.T.); +#165711 = VERTEX_POINT('',#165712); +#165712 = CARTESIAN_POINT('',(135.730079,-103.35805,1.585)); +#165713 = CIRCLE('',#165714,0.397464151365); +#165714 = AXIS2_PLACEMENT_3D('',#165715,#165716,#165717); +#165715 = CARTESIAN_POINT('',(135.96780064058,-103.0395124461,1.585)); +#165716 = DIRECTION('',(-0.,0.,-1.)); +#165717 = DIRECTION('',(0.579562606145,-0.814927717996,-0.)); +#165718 = ORIENTED_EDGE('',*,*,#165719,.T.); +#165719 = EDGE_CURVE('',#165711,#165720,#165722,.T.); +#165720 = VERTEX_POINT('',#165721); +#165721 = CARTESIAN_POINT('',(135.666626,-103.292517,1.585)); +#165722 = LINE('',#165723,#165724); +#165723 = CARTESIAN_POINT('',(135.730079,-103.35805,1.585)); +#165724 = VECTOR('',#165725,1.); +#165725 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#165726 = ORIENTED_EDGE('',*,*,#165727,.T.); +#165727 = EDGE_CURVE('',#165720,#165728,#165730,.T.); +#165728 = VERTEX_POINT('',#165729); +#165729 = CARTESIAN_POINT('',(135.671993,-102.824444,1.585)); +#165730 = CIRCLE('',#165731,0.397465551155); +#165731 = AXIS2_PLACEMENT_3D('',#165732,#165733,#165734); +#165732 = CARTESIAN_POINT('',(135.99053374227,-103.0621637086,1.585)); +#165733 = DIRECTION('',(0.,0.,-1.)); +#165734 = DIRECTION('',(-0.814932869863,-0.579555361995,-0.)); +#165735 = ORIENTED_EDGE('',*,*,#165736,.T.); +#165736 = EDGE_CURVE('',#165728,#165737,#165739,.T.); +#165737 = VERTEX_POINT('',#165738); +#165738 = CARTESIAN_POINT('',(135.718917,-102.77649,1.585)); +#165739 = LINE('',#165740,#165741); +#165740 = CARTESIAN_POINT('',(135.671993,-102.824444,1.585)); +#165741 = VECTOR('',#165742,1.); +#165742 = DIRECTION('',(0.699389185334,0.714741049218,0.)); +#165743 = ORIENTED_EDGE('',*,*,#165744,.T.); +#165744 = EDGE_CURVE('',#165737,#165745,#165747,.T.); +#165745 = VERTEX_POINT('',#165746); +#165746 = CARTESIAN_POINT('',(135.662663,-102.714793,1.585)); +#165747 = LINE('',#165748,#165749); +#165748 = CARTESIAN_POINT('',(135.718917,-102.77649,1.585)); +#165749 = VECTOR('',#165750,1.); +#165750 = DIRECTION('',(-0.673759436039,0.738950757729,0.)); +#165751 = ORIENTED_EDGE('',*,*,#165752,.T.); +#165752 = EDGE_CURVE('',#165745,#165753,#165755,.T.); +#165753 = VERTEX_POINT('',#165754); +#165754 = CARTESIAN_POINT('',(135.608567,-102.600646,1.585)); +#165755 = LINE('',#165756,#165757); +#165756 = CARTESIAN_POINT('',(135.662663,-102.714793,1.585)); +#165757 = VECTOR('',#165758,1.); +#165758 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#165759 = ORIENTED_EDGE('',*,*,#165760,.T.); +#165760 = EDGE_CURVE('',#165753,#165761,#165763,.T.); +#165761 = VERTEX_POINT('',#165762); +#165762 = CARTESIAN_POINT('',(135.609789,-102.518586,1.585)); +#165763 = LINE('',#165764,#165765); +#165764 = CARTESIAN_POINT('',(135.608567,-102.600646,1.585)); +#165765 = VECTOR('',#165766,1.); +#165766 = DIRECTION('',(1.488989188859E-02,0.999889139415,0.)); +#165767 = ORIENTED_EDGE('',*,*,#165768,.T.); +#165768 = EDGE_CURVE('',#165761,#165769,#165771,.T.); +#165769 = VERTEX_POINT('',#165770); +#165770 = CARTESIAN_POINT('',(135.671993,-102.395873,1.585)); +#165771 = LINE('',#165772,#165773); +#165772 = CARTESIAN_POINT('',(135.609789,-102.518586,1.585)); +#165773 = VECTOR('',#165774,1.); +#165774 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#165775 = ORIENTED_EDGE('',*,*,#165776,.T.); +#165776 = EDGE_CURVE('',#165769,#165635,#165777,.T.); +#165777 = LINE('',#165778,#165779); +#165778 = CARTESIAN_POINT('',(135.671993,-102.395873,1.585)); +#165779 = VECTOR('',#165780,1.); +#165780 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#165781 = FACE_BOUND('',#165782,.F.); +#165782 = EDGE_LOOP('',(#165783,#165794,#165802,#165811,#165819,#165828, + #165836,#165845)); +#165783 = ORIENTED_EDGE('',*,*,#165784,.T.); +#165784 = EDGE_CURVE('',#165785,#165787,#165789,.T.); +#165785 = VERTEX_POINT('',#165786); +#165786 = CARTESIAN_POINT('',(136.113889,-102.885748,1.585)); +#165787 = VERTEX_POINT('',#165788); +#165788 = CARTESIAN_POINT('',(135.821791,-102.885748,1.585)); +#165789 = CIRCLE('',#165790,0.252889603602); +#165790 = AXIS2_PLACEMENT_3D('',#165791,#165792,#165793); +#165791 = CARTESIAN_POINT('',(135.96784,-103.092201,1.585)); +#165792 = DIRECTION('',(0.,0.,1.)); +#165793 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#165794 = ORIENTED_EDGE('',*,*,#165795,.T.); +#165795 = EDGE_CURVE('',#165787,#165796,#165798,.T.); +#165796 = VERTEX_POINT('',#165797); +#165797 = CARTESIAN_POINT('',(135.791384,-102.916155,1.585)); +#165798 = LINE('',#165799,#165800); +#165799 = CARTESIAN_POINT('',(135.821791,-102.885748,1.585)); +#165800 = VECTOR('',#165801,1.); +#165801 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#165802 = ORIENTED_EDGE('',*,*,#165803,.T.); +#165803 = EDGE_CURVE('',#165796,#165804,#165806,.T.); +#165804 = VERTEX_POINT('',#165805); +#165805 = CARTESIAN_POINT('',(135.791384,-103.208253,1.585)); +#165806 = CIRCLE('',#165807,0.252889603602); +#165807 = AXIS2_PLACEMENT_3D('',#165808,#165809,#165810); +#165808 = CARTESIAN_POINT('',(135.997837,-103.062204,1.585)); +#165809 = DIRECTION('',(0.,0.,1.)); +#165810 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#165811 = ORIENTED_EDGE('',*,*,#165812,.T.); +#165812 = EDGE_CURVE('',#165804,#165813,#165815,.T.); +#165813 = VERTEX_POINT('',#165814); +#165814 = CARTESIAN_POINT('',(135.821791,-103.238661,1.585)); +#165815 = LINE('',#165816,#165817); +#165816 = CARTESIAN_POINT('',(135.791384,-103.208253,1.585)); +#165817 = VECTOR('',#165818,1.); +#165818 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#165819 = ORIENTED_EDGE('',*,*,#165820,.T.); +#165820 = EDGE_CURVE('',#165813,#165821,#165823,.T.); +#165821 = VERTEX_POINT('',#165822); +#165822 = CARTESIAN_POINT('',(136.113888,-103.238661,1.585)); +#165823 = CIRCLE('',#165824,0.252888498466); +#165824 = AXIS2_PLACEMENT_3D('',#165825,#165826,#165827); +#165825 = CARTESIAN_POINT('',(135.9678395,-103.032209,1.585)); +#165826 = DIRECTION('',(0.,0.,1.)); +#165827 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#165828 = ORIENTED_EDGE('',*,*,#165829,.T.); +#165829 = EDGE_CURVE('',#165821,#165830,#165832,.T.); +#165830 = VERTEX_POINT('',#165831); +#165831 = CARTESIAN_POINT('',(136.144295,-103.208253,1.585)); +#165832 = LINE('',#165833,#165834); +#165833 = CARTESIAN_POINT('',(136.113888,-103.238661,1.585)); +#165834 = VECTOR('',#165835,1.); +#165835 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#165836 = ORIENTED_EDGE('',*,*,#165837,.T.); +#165837 = EDGE_CURVE('',#165830,#165838,#165840,.T.); +#165838 = VERTEX_POINT('',#165839); +#165839 = CARTESIAN_POINT('',(136.144296,-102.916155,1.585)); +#165840 = CIRCLE('',#165841,0.252885429722); +#165841 = AXIS2_PLACEMENT_3D('',#165842,#165843,#165844); +#165842 = CARTESIAN_POINT('',(135.93784761271,-103.0622032932,1.585)); +#165843 = DIRECTION('',(0.,-0.,1.)); +#165844 = DIRECTION('',(0.816367267623,-0.577533102387,-0.)); +#165845 = ORIENTED_EDGE('',*,*,#165846,.T.); +#165846 = EDGE_CURVE('',#165838,#165785,#165847,.T.); +#165847 = LINE('',#165848,#165849); +#165848 = CARTESIAN_POINT('',(136.144296,-102.916155,1.585)); +#165849 = VECTOR('',#165850,1.); +#165850 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165851 = FACE_BOUND('',#165852,.F.); +#165852 = EDGE_LOOP('',(#165853,#165864,#165872,#165880,#165888,#165897, + #165905,#165914,#165922,#165930)); +#165853 = ORIENTED_EDGE('',*,*,#165854,.T.); +#165854 = EDGE_CURVE('',#165855,#165857,#165859,.T.); +#165855 = VERTEX_POINT('',#165856); +#165856 = CARTESIAN_POINT('',(136.113889,-102.457177,1.585)); +#165857 = VERTEX_POINT('',#165858); +#165858 = CARTESIAN_POINT('',(135.821791,-102.457177,1.585)); +#165859 = CIRCLE('',#165860,0.252889603602); +#165860 = AXIS2_PLACEMENT_3D('',#165861,#165862,#165863); +#165861 = CARTESIAN_POINT('',(135.96784,-102.66363,1.585)); +#165862 = DIRECTION('',(0.,0.,1.)); +#165863 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#165864 = ORIENTED_EDGE('',*,*,#165865,.T.); +#165865 = EDGE_CURVE('',#165857,#165866,#165868,.T.); +#165866 = VERTEX_POINT('',#165867); +#165867 = CARTESIAN_POINT('',(135.791384,-102.487584,1.585)); +#165868 = LINE('',#165869,#165870); +#165869 = CARTESIAN_POINT('',(135.821791,-102.457177,1.585)); +#165870 = VECTOR('',#165871,1.); +#165871 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#165872 = ORIENTED_EDGE('',*,*,#165873,.T.); +#165873 = EDGE_CURVE('',#165866,#165874,#165876,.T.); +#165874 = VERTEX_POINT('',#165875); +#165875 = CARTESIAN_POINT('',(135.757126,-102.5561,1.585)); +#165876 = LINE('',#165877,#165878); +#165877 = CARTESIAN_POINT('',(135.791384,-102.487584,1.585)); +#165878 = VECTOR('',#165879,1.); +#165879 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#165880 = ORIENTED_EDGE('',*,*,#165881,.T.); +#165881 = EDGE_CURVE('',#165874,#165882,#165884,.T.); +#165882 = VERTEX_POINT('',#165883); +#165883 = CARTESIAN_POINT('',(135.757126,-102.568309,1.585)); +#165884 = LINE('',#165885,#165886); +#165885 = CARTESIAN_POINT('',(135.757126,-102.5561,1.585)); +#165886 = VECTOR('',#165887,1.); +#165887 = DIRECTION('',(0.,-1.,0.)); +#165888 = ORIENTED_EDGE('',*,*,#165889,.T.); +#165889 = EDGE_CURVE('',#165882,#165890,#165892,.T.); +#165890 = VERTEX_POINT('',#165891); +#165891 = CARTESIAN_POINT('',(135.890307,-102.70149,1.585)); +#165892 = CIRCLE('',#165893,0.18686440374); +#165893 = AXIS2_PLACEMENT_3D('',#165894,#165895,#165896); +#165894 = CARTESIAN_POINT('',(135.937843,-102.520773,1.585)); +#165895 = DIRECTION('',(0.,0.,1.)); +#165896 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#165897 = ORIENTED_EDGE('',*,*,#165898,.T.); +#165898 = EDGE_CURVE('',#165890,#165899,#165901,.T.); +#165899 = VERTEX_POINT('',#165900); +#165900 = CARTESIAN_POINT('',(136.045373,-102.70149,1.585)); +#165901 = LINE('',#165902,#165903); +#165902 = CARTESIAN_POINT('',(135.890307,-102.70149,1.585)); +#165903 = VECTOR('',#165904,1.); +#165904 = DIRECTION('',(1.,0.,0.)); +#165905 = ORIENTED_EDGE('',*,*,#165906,.T.); +#165906 = EDGE_CURVE('',#165899,#165907,#165909,.T.); +#165907 = VERTEX_POINT('',#165908); +#165908 = CARTESIAN_POINT('',(136.178554,-102.568309,1.585)); +#165909 = CIRCLE('',#165910,0.18686440374); +#165910 = AXIS2_PLACEMENT_3D('',#165911,#165912,#165913); +#165911 = CARTESIAN_POINT('',(135.997837,-102.520773,1.585)); +#165912 = DIRECTION('',(0.,0.,1.)); +#165913 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#165914 = ORIENTED_EDGE('',*,*,#165915,.T.); +#165915 = EDGE_CURVE('',#165907,#165916,#165918,.T.); +#165916 = VERTEX_POINT('',#165917); +#165917 = CARTESIAN_POINT('',(136.178554,-102.5561,1.585)); +#165918 = LINE('',#165919,#165920); +#165919 = CARTESIAN_POINT('',(136.178554,-102.568309,1.585)); +#165920 = VECTOR('',#165921,1.); +#165921 = DIRECTION('',(0.,1.,0.)); +#165922 = ORIENTED_EDGE('',*,*,#165923,.T.); +#165923 = EDGE_CURVE('',#165916,#165924,#165926,.T.); +#165924 = VERTEX_POINT('',#165925); +#165925 = CARTESIAN_POINT('',(136.144296,-102.487584,1.585)); +#165926 = LINE('',#165927,#165928); +#165927 = CARTESIAN_POINT('',(136.178554,-102.5561,1.585)); +#165928 = VECTOR('',#165929,1.); +#165929 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#165930 = ORIENTED_EDGE('',*,*,#165931,.T.); +#165931 = EDGE_CURVE('',#165924,#165855,#165932,.T.); +#165932 = LINE('',#165933,#165934); +#165933 = CARTESIAN_POINT('',(136.144296,-102.487584,1.585)); +#165934 = VECTOR('',#165935,1.); +#165935 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165936 = PLANE('',#165937); +#165937 = AXIS2_PLACEMENT_3D('',#165938,#165939,#165940); +#165938 = CARTESIAN_POINT('',(0.,0.,1.585)); +#165939 = DIRECTION('',(0.,0.,1.)); +#165940 = DIRECTION('',(1.,0.,-0.)); +#165941 = SHELL_BASED_SURFACE_MODEL('',(#165942)); +#165942 = OPEN_SHELL('',(#165943)); +#165943 = ADVANCED_FACE('',(#165944),#166129,.T.); +#165944 = FACE_BOUND('',#165945,.F.); +#165945 = EDGE_LOOP('',(#165946,#165957,#165965,#165974,#165982,#165991, + #165999,#166008,#166016,#166024,#166032,#166041,#166049,#166058, + #166066,#166075,#166083,#166091,#166099,#166107,#166115,#166123)); +#165946 = ORIENTED_EDGE('',*,*,#165947,.T.); +#165947 = EDGE_CURVE('',#165948,#165950,#165952,.T.); +#165948 = VERTEX_POINT('',#165949); +#165949 = CARTESIAN_POINT('',(129.883078,-102.080381,1.585)); +#165950 = VERTEX_POINT('',#165951); +#165951 = CARTESIAN_POINT('',(130.342841,-102.083178,1.585)); +#165952 = CIRCLE('',#165953,0.46078517582); +#165953 = AXIS2_PLACEMENT_3D('',#165954,#165955,#165956); +#165954 = CARTESIAN_POINT('',(130.11053010897,-102.4811159702,1.585)); +#165955 = DIRECTION('',(0.,0.,-1.)); +#165956 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#165957 = ORIENTED_EDGE('',*,*,#165958,.T.); +#165958 = EDGE_CURVE('',#165950,#165959,#165961,.T.); +#165959 = VERTEX_POINT('',#165960); +#165960 = CARTESIAN_POINT('',(130.411152,-102.151489,1.585)); +#165961 = LINE('',#165962,#165963); +#165962 = CARTESIAN_POINT('',(130.342841,-102.083178,1.585)); +#165963 = VECTOR('',#165964,1.); +#165964 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#165965 = ORIENTED_EDGE('',*,*,#165966,.T.); +#165966 = EDGE_CURVE('',#165959,#165967,#165969,.T.); +#165967 = VERTEX_POINT('',#165968); +#165968 = CARTESIAN_POINT('',(130.295759,-102.24619,1.585)); +#165969 = CIRCLE('',#165970,7.500003178655E-02); +#165970 = AXIS2_PLACEMENT_3D('',#165971,#165972,#165973); +#165971 = CARTESIAN_POINT('',(130.34879156212,-102.1931565,1.585)); +#165972 = DIRECTION('',(0.,0.,-1.)); +#165973 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#165974 = ORIENTED_EDGE('',*,*,#165975,.T.); +#165975 = EDGE_CURVE('',#165967,#165976,#165978,.T.); +#165976 = VERTEX_POINT('',#165977); +#165977 = CARTESIAN_POINT('',(130.260659,-102.21109,1.585)); +#165978 = LINE('',#165979,#165980); +#165979 = CARTESIAN_POINT('',(130.295759,-102.24619,1.585)); +#165980 = VECTOR('',#165981,1.); +#165981 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165982 = ORIENTED_EDGE('',*,*,#165983,.T.); +#165983 = EDGE_CURVE('',#165976,#165984,#165986,.T.); +#165984 = VERTEX_POINT('',#165985); +#165985 = CARTESIAN_POINT('',(129.960735,-102.21109,1.585)); +#165986 = CIRCLE('',#165987,0.299308637371); +#165987 = AXIS2_PLACEMENT_3D('',#165988,#165989,#165990); +#165988 = CARTESIAN_POINT('',(130.110697,-102.470121,1.585)); +#165989 = DIRECTION('',(0.,0.,1.)); +#165990 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#165991 = ORIENTED_EDGE('',*,*,#165992,.T.); +#165992 = EDGE_CURVE('',#165984,#165993,#165995,.T.); +#165993 = VERTEX_POINT('',#165994); +#165994 = CARTESIAN_POINT('',(129.886622,-102.285203,1.585)); +#165995 = LINE('',#165996,#165997); +#165996 = CARTESIAN_POINT('',(129.960735,-102.21109,1.585)); +#165997 = VECTOR('',#165998,1.); +#165998 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#165999 = ORIENTED_EDGE('',*,*,#166000,.T.); +#166000 = EDGE_CURVE('',#165993,#166001,#166003,.T.); +#166001 = VERTEX_POINT('',#166002); +#166002 = CARTESIAN_POINT('',(129.804745,-102.660113,1.585)); +#166003 = CIRCLE('',#166004,0.611712714363); +#166004 = AXIS2_PLACEMENT_3D('',#166005,#166006,#166007); +#166005 = CARTESIAN_POINT('',(130.41315027521,-102.5965876822,1.585)); +#166006 = DIRECTION('',(0.,0.,1.)); +#166007 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#166008 = ORIENTED_EDGE('',*,*,#166009,.T.); +#166009 = EDGE_CURVE('',#166001,#166010,#166012,.T.); +#166010 = VERTEX_POINT('',#166011); +#166011 = CARTESIAN_POINT('',(129.848128,-102.833647,1.585)); +#166012 = LINE('',#166013,#166014); +#166013 = CARTESIAN_POINT('',(129.804745,-102.660113,1.585)); +#166014 = VECTOR('',#166015,1.); +#166015 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#166016 = ORIENTED_EDGE('',*,*,#166017,.T.); +#166017 = EDGE_CURVE('',#166010,#166018,#166020,.T.); +#166018 = VERTEX_POINT('',#166019); +#166019 = CARTESIAN_POINT('',(129.886622,-102.910634,1.585)); +#166020 = LINE('',#166021,#166022); +#166021 = CARTESIAN_POINT('',(129.848128,-102.833647,1.585)); +#166022 = VECTOR('',#166023,1.); +#166023 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#166024 = ORIENTED_EDGE('',*,*,#166025,.T.); +#166025 = EDGE_CURVE('',#166018,#166026,#166028,.T.); +#166026 = VERTEX_POINT('',#166027); +#166027 = CARTESIAN_POINT('',(129.960735,-102.984748,1.585)); +#166028 = LINE('',#166029,#166030); +#166029 = CARTESIAN_POINT('',(129.886622,-102.910634,1.585)); +#166030 = VECTOR('',#166031,1.); +#166031 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#166032 = ORIENTED_EDGE('',*,*,#166033,.T.); +#166033 = EDGE_CURVE('',#166026,#166034,#166036,.T.); +#166034 = VERTEX_POINT('',#166035); +#166035 = CARTESIAN_POINT('',(130.260659,-102.984747,1.585)); +#166036 = CIRCLE('',#166037,0.299305962385); +#166037 = AXIS2_PLACEMENT_3D('',#166038,#166039,#166040); +#166038 = CARTESIAN_POINT('',(130.11069613635,-102.7257195909,1.585)); +#166039 = DIRECTION('',(0.,0.,1.)); +#166040 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#166041 = ORIENTED_EDGE('',*,*,#166042,.T.); +#166042 = EDGE_CURVE('',#166034,#166043,#166045,.T.); +#166043 = VERTEX_POINT('',#166044); +#166044 = CARTESIAN_POINT('',(130.307124,-102.94032,1.585)); +#166045 = LINE('',#166046,#166047); +#166046 = CARTESIAN_POINT('',(130.260659,-102.984747,1.585)); +#166047 = VECTOR('',#166048,1.); +#166048 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#166049 = ORIENTED_EDGE('',*,*,#166050,.T.); +#166050 = EDGE_CURVE('',#166043,#166051,#166053,.T.); +#166051 = VERTEX_POINT('',#166052); +#166052 = CARTESIAN_POINT('',(130.401825,-103.055713,1.585)); +#166053 = CIRCLE('',#166054,7.499993690112E-02); +#166054 = AXIS2_PLACEMENT_3D('',#166055,#166056,#166057); +#166055 = CARTESIAN_POINT('',(130.3487922483,-103.0026798237,1.585)); +#166056 = DIRECTION('',(0.,0.,-1.)); +#166057 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#166058 = ORIENTED_EDGE('',*,*,#166059,.T.); +#166059 = EDGE_CURVE('',#166051,#166060,#166062,.T.); +#166060 = VERTEX_POINT('',#166061); +#166061 = CARTESIAN_POINT('',(130.338315,-103.115457,1.585)); +#166062 = LINE('',#166063,#166064); +#166063 = CARTESIAN_POINT('',(130.401825,-103.055713,1.585)); +#166064 = VECTOR('',#166065,1.); +#166065 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#166066 = ORIENTED_EDGE('',*,*,#166067,.T.); +#166067 = EDGE_CURVE('',#166060,#166068,#166070,.T.); +#166068 = VERTEX_POINT('',#166069); +#166069 = CARTESIAN_POINT('',(129.878553,-103.112661,1.585)); +#166070 = CIRCLE('',#166071,0.461067828848); +#166071 = AXIS2_PLACEMENT_3D('',#166072,#166073,#166074); +#166072 = CARTESIAN_POINT('',(130.11086451268,-102.7143961335,1.585)); +#166073 = DIRECTION('',(-0.,0.,-1.)); +#166074 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#166075 = ORIENTED_EDGE('',*,*,#166076,.T.); +#166076 = EDGE_CURVE('',#166068,#166077,#166079,.T.); +#166077 = VERTEX_POINT('',#166078); +#166078 = CARTESIAN_POINT('',(129.761864,-102.994898,1.585)); +#166079 = LINE('',#166080,#166081); +#166080 = CARTESIAN_POINT('',(129.878553,-103.112661,1.585)); +#166081 = VECTOR('',#166082,1.); +#166082 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#166083 = ORIENTED_EDGE('',*,*,#166084,.T.); +#166084 = EDGE_CURVE('',#166077,#166085,#166087,.T.); +#166085 = VERTEX_POINT('',#166086); +#166086 = CARTESIAN_POINT('',(129.704603,-102.878013,1.585)); +#166087 = LINE('',#166088,#166089); +#166088 = CARTESIAN_POINT('',(129.761864,-102.994898,1.585)); +#166089 = VECTOR('',#166090,1.); +#166090 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#166091 = ORIENTED_EDGE('',*,*,#166092,.T.); +#166092 = EDGE_CURVE('',#166085,#166093,#166095,.T.); +#166093 = VERTEX_POINT('',#166094); +#166094 = CARTESIAN_POINT('',(129.654745,-102.669347,1.585)); +#166095 = LINE('',#166096,#166097); +#166096 = CARTESIAN_POINT('',(129.704603,-102.878013,1.585)); +#166097 = VECTOR('',#166098,1.); +#166098 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#166099 = ORIENTED_EDGE('',*,*,#166100,.T.); +#166100 = EDGE_CURVE('',#166093,#166101,#166103,.T.); +#166101 = VERTEX_POINT('',#166102); +#166102 = CARTESIAN_POINT('',(129.656984,-102.5083,1.585)); +#166103 = LINE('',#166104,#166105); +#166104 = CARTESIAN_POINT('',(129.654745,-102.669347,1.585)); +#166105 = VECTOR('',#166106,1.); +#166106 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#166107 = ORIENTED_EDGE('',*,*,#166108,.T.); +#166108 = EDGE_CURVE('',#166101,#166109,#166111,.T.); +#166109 = VERTEX_POINT('',#166110); +#166110 = CARTESIAN_POINT('',(129.710282,-102.302473,1.585)); +#166111 = LINE('',#166112,#166113); +#166112 = CARTESIAN_POINT('',(129.656984,-102.5083,1.585)); +#166113 = VECTOR('',#166114,1.); +#166114 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#166115 = ORIENTED_EDGE('',*,*,#166116,.T.); +#166116 = EDGE_CURVE('',#166109,#166117,#166119,.T.); +#166117 = VERTEX_POINT('',#166118); +#166118 = CARTESIAN_POINT('',(129.767231,-102.193492,1.585)); +#166119 = LINE('',#166120,#166121); +#166120 = CARTESIAN_POINT('',(129.710282,-102.302473,1.585)); +#166121 = VECTOR('',#166122,1.); +#166122 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#166123 = ORIENTED_EDGE('',*,*,#166124,.T.); +#166124 = EDGE_CURVE('',#166117,#165948,#166125,.T.); +#166125 = LINE('',#166126,#166127); +#166126 = CARTESIAN_POINT('',(129.767231,-102.193492,1.585)); +#166127 = VECTOR('',#166128,1.); +#166128 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#166129 = PLANE('',#166130); +#166130 = AXIS2_PLACEMENT_3D('',#166131,#166132,#166133); +#166131 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166132 = DIRECTION('',(0.,0.,1.)); +#166133 = DIRECTION('',(1.,0.,-0.)); +#166134 = SHELL_BASED_SURFACE_MODEL('',(#166135)); +#166135 = OPEN_SHELL('',(#166136)); +#166136 = ADVANCED_FACE('',(#166137),#166323,.T.); +#166137 = FACE_BOUND('',#166138,.F.); +#166138 = EDGE_LOOP('',(#166139,#166150,#166158,#166167,#166175,#166183, + #166192,#166200,#166209,#166217,#166225,#166233,#166242,#166250, + #166259,#166267,#166276,#166284,#166292,#166300,#166309,#166317)); +#166139 = ORIENTED_EDGE('',*,*,#166140,.T.); +#166140 = EDGE_CURVE('',#166141,#166143,#166145,.T.); +#166141 = VERTEX_POINT('',#166142); +#166142 = CARTESIAN_POINT('',(130.667494,-102.171478,1.585)); +#166143 = VERTEX_POINT('',#166144); +#166144 = CARTESIAN_POINT('',(130.682126,-102.022919,1.585)); +#166145 = CIRCLE('',#166146,7.500006711463E-02); +#166146 = AXIS2_PLACEMENT_3D('',#166147,#166148,#166149); +#166147 = CARTESIAN_POINT('',(130.68212593288,-102.0979190671,1.585)); +#166148 = DIRECTION('',(0.,0.,-1.)); +#166149 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#166150 = ORIENTED_EDGE('',*,*,#166151,.T.); +#166151 = EDGE_CURVE('',#166143,#166152,#166154,.T.); +#166152 = VERTEX_POINT('',#166153); +#166153 = CARTESIAN_POINT('',(131.308911,-102.023681,1.585)); +#166154 = LINE('',#166155,#166156); +#166155 = CARTESIAN_POINT('',(130.682126,-102.022919,1.585)); +#166156 = VECTOR('',#166157,1.); +#166157 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#166158 = ORIENTED_EDGE('',*,*,#166159,.T.); +#166159 = EDGE_CURVE('',#166152,#166160,#166162,.T.); +#166160 = VERTEX_POINT('',#166161); +#166161 = CARTESIAN_POINT('',(131.374732,-102.112551,1.585)); +#166162 = CIRCLE('',#166163,7.447391611626E-02); +#166163 = AXIS2_PLACEMENT_3D('',#166164,#166165,#166166); +#166164 = CARTESIAN_POINT('',(131.30173192664,-102.0978080874,1.585)); +#166165 = DIRECTION('',(0.,0.,-1.)); +#166166 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#166167 = ORIENTED_EDGE('',*,*,#166168,.T.); +#166168 = EDGE_CURVE('',#166160,#166169,#166171,.T.); +#166169 = VERTEX_POINT('',#166170); +#166170 = CARTESIAN_POINT('',(131.357616,-102.147307,1.585)); +#166171 = LINE('',#166172,#166173); +#166172 = CARTESIAN_POINT('',(131.374732,-102.112551,1.585)); +#166173 = VECTOR('',#166174,1.); +#166174 = DIRECTION('',(-0.441795255026,-0.897115908139,0.)); +#166175 = ORIENTED_EDGE('',*,*,#166176,.T.); +#166176 = EDGE_CURVE('',#166169,#166177,#166179,.T.); +#166177 = VERTEX_POINT('',#166178); +#166178 = CARTESIAN_POINT('',(131.13072,-102.406616,1.585)); +#166179 = LINE('',#166180,#166181); +#166180 = CARTESIAN_POINT('',(131.357616,-102.147307,1.585)); +#166181 = VECTOR('',#166182,1.); +#166182 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#166183 = ORIENTED_EDGE('',*,*,#166184,.T.); +#166184 = EDGE_CURVE('',#166177,#166185,#166187,.T.); +#166185 = VERTEX_POINT('',#166186); +#166186 = CARTESIAN_POINT('',(131.374732,-102.654715,1.585)); +#166187 = CIRCLE('',#166188,0.348520834816); +#166188 = AXIS2_PLACEMENT_3D('',#166189,#166190,#166191); +#166189 = CARTESIAN_POINT('',(131.0374266174,-102.7424181993,1.585)); +#166190 = DIRECTION('',(0.,0.,-1.)); +#166191 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#166192 = ORIENTED_EDGE('',*,*,#166193,.T.); +#166193 = EDGE_CURVE('',#166185,#166194,#166196,.T.); +#166194 = VERTEX_POINT('',#166195); +#166195 = CARTESIAN_POINT('',(131.37351,-102.927252,1.585)); +#166196 = LINE('',#166197,#166198); +#166197 = CARTESIAN_POINT('',(131.374732,-102.654715,1.585)); +#166198 = VECTOR('',#166199,1.); +#166199 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#166200 = ORIENTED_EDGE('',*,*,#166201,.T.); +#166201 = EDGE_CURVE('',#166194,#166202,#166204,.T.); +#166202 = VERTEX_POINT('',#166203); +#166203 = CARTESIAN_POINT('',(131.125329,-103.171478,1.585)); +#166204 = CIRCLE('',#166205,0.348635327447); +#166205 = AXIS2_PLACEMENT_3D('',#166206,#166207,#166208); +#166206 = CARTESIAN_POINT('',(131.03755748129,-102.8340720841,1.585)); +#166207 = DIRECTION('',(0.,0.,-1.)); +#166208 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#166209 = ORIENTED_EDGE('',*,*,#166210,.T.); +#166210 = EDGE_CURVE('',#166202,#166211,#166213,.T.); +#166211 = VERTEX_POINT('',#166212); +#166212 = CARTESIAN_POINT('',(130.805173,-103.170256,1.585)); +#166213 = LINE('',#166214,#166215); +#166214 = CARTESIAN_POINT('',(131.125329,-103.171478,1.585)); +#166215 = VECTOR('',#166216,1.); +#166216 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#166217 = ORIENTED_EDGE('',*,*,#166218,.T.); +#166218 = EDGE_CURVE('',#166211,#166219,#166221,.T.); +#166219 = VERTEX_POINT('',#166220); +#166220 = CARTESIAN_POINT('',(130.68246,-103.10805,1.585)); +#166221 = LINE('',#166222,#166223); +#166222 = CARTESIAN_POINT('',(130.805173,-103.170256,1.585)); +#166223 = VECTOR('',#166224,1.); +#166224 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#166225 = ORIENTED_EDGE('',*,*,#166226,.T.); +#166226 = EDGE_CURVE('',#166219,#166227,#166229,.T.); +#166227 = VERTEX_POINT('',#166228); +#166228 = CARTESIAN_POINT('',(130.619765,-103.044347,1.585)); +#166229 = LINE('',#166230,#166231); +#166230 = CARTESIAN_POINT('',(130.68246,-103.10805,1.585)); +#166231 = VECTOR('',#166232,1.); +#166232 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#166233 = ORIENTED_EDGE('',*,*,#166234,.T.); +#166234 = EDGE_CURVE('',#166227,#166235,#166237,.T.); +#166235 = VERTEX_POINT('',#166236); +#166236 = CARTESIAN_POINT('',(130.73516,-102.949648,1.585)); +#166237 = CIRCLE('',#166238,7.50001266804E-02); +#166238 = AXIS2_PLACEMENT_3D('',#166239,#166240,#166241); +#166239 = CARTESIAN_POINT('',(130.68212605199,-103.0026802483,1.585)); +#166240 = DIRECTION('',(0.,0.,-1.)); +#166241 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#166242 = ORIENTED_EDGE('',*,*,#166243,.T.); +#166243 = EDGE_CURVE('',#166235,#166244,#166246,.T.); +#166244 = VERTEX_POINT('',#166245); +#166245 = CARTESIAN_POINT('',(130.774172,-102.988661,1.585)); +#166246 = LINE('',#166247,#166248); +#166247 = CARTESIAN_POINT('',(130.73516,-102.949648,1.585)); +#166248 = VECTOR('',#166249,1.); +#166249 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#166250 = ORIENTED_EDGE('',*,*,#166251,.T.); +#166251 = EDGE_CURVE('',#166244,#166252,#166254,.T.); +#166252 = VERTEX_POINT('',#166253); +#166253 = CARTESIAN_POINT('',(131.161507,-102.988661,1.585)); +#166254 = CIRCLE('',#166255,0.358502380266); +#166255 = AXIS2_PLACEMENT_3D('',#166256,#166257,#166258); +#166256 = CARTESIAN_POINT('',(130.9678395,-102.686971,1.585)); +#166257 = DIRECTION('',(0.,0.,1.)); +#166258 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#166259 = ORIENTED_EDGE('',*,*,#166260,.T.); +#166260 = EDGE_CURVE('',#166252,#166261,#166263,.T.); +#166261 = VERTEX_POINT('',#166262); +#166262 = CARTESIAN_POINT('',(131.191914,-102.958253,1.585)); +#166263 = LINE('',#166264,#166265); +#166264 = CARTESIAN_POINT('',(131.161507,-102.988661,1.585)); +#166265 = VECTOR('',#166266,1.); +#166266 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#166267 = ORIENTED_EDGE('',*,*,#166268,.T.); +#166268 = EDGE_CURVE('',#166261,#166269,#166271,.T.); +#166269 = VERTEX_POINT('',#166270); +#166270 = CARTESIAN_POINT('',(131.191915,-102.618536,1.585)); +#166271 = CIRCLE('',#166272,0.305616146029); +#166272 = AXIS2_PLACEMENT_3D('',#166273,#166274,#166275); +#166273 = CARTESIAN_POINT('',(130.93784892049,-102.7883937521,1.585)); +#166274 = DIRECTION('',(0.,-0.,1.)); +#166275 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#166276 = ORIENTED_EDGE('',*,*,#166277,.T.); +#166277 = EDGE_CURVE('',#166269,#166278,#166280,.T.); +#166278 = VERTEX_POINT('',#166279); +#166279 = CARTESIAN_POINT('',(131.161508,-102.588129,1.585)); +#166280 = LINE('',#166281,#166282); +#166281 = CARTESIAN_POINT('',(131.191915,-102.618536,1.585)); +#166282 = VECTOR('',#166283,1.); +#166283 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#166284 = ORIENTED_EDGE('',*,*,#166285,.T.); +#166285 = EDGE_CURVE('',#166278,#166286,#166288,.T.); +#166286 = VERTEX_POINT('',#166287); +#166287 = CARTESIAN_POINT('',(131.092992,-102.553871,1.585)); +#166288 = LINE('',#166289,#166290); +#166289 = CARTESIAN_POINT('',(131.161508,-102.588129,1.585)); +#166290 = VECTOR('',#166291,1.); +#166291 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#166292 = ORIENTED_EDGE('',*,*,#166293,.T.); +#166293 = EDGE_CURVE('',#166286,#166294,#166296,.T.); +#166294 = VERTEX_POINT('',#166295); +#166295 = CARTESIAN_POINT('',(130.953208,-102.55243,1.585)); +#166296 = LINE('',#166297,#166298); +#166297 = CARTESIAN_POINT('',(131.092992,-102.553871,1.585)); +#166298 = VECTOR('',#166299,1.); +#166299 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#166300 = ORIENTED_EDGE('',*,*,#166301,.T.); +#166301 = EDGE_CURVE('',#166294,#166302,#166304,.T.); +#166302 = VERTEX_POINT('',#166303); +#166303 = CARTESIAN_POINT('',(130.911397,-102.429483,1.585)); +#166304 = CIRCLE('',#166305,7.500015628759E-02); +#166305 = AXIS2_PLACEMENT_3D('',#166306,#166307,#166308); +#166306 = CARTESIAN_POINT('',(130.96784028432,-102.4788710461,1.585)); +#166307 = DIRECTION('',(0.,0.,-1.)); +#166308 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#166309 = ORIENTED_EDGE('',*,*,#166310,.T.); +#166310 = EDGE_CURVE('',#166302,#166311,#166313,.T.); +#166311 = VERTEX_POINT('',#166312); +#166312 = CARTESIAN_POINT('',(131.135891,-102.172919,1.585)); +#166313 = LINE('',#166314,#166315); +#166314 = CARTESIAN_POINT('',(130.911397,-102.429483,1.585)); +#166315 = VECTOR('',#166316,1.); +#166316 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#166317 = ORIENTED_EDGE('',*,*,#166318,.T.); +#166318 = EDGE_CURVE('',#166311,#166141,#166319,.T.); +#166319 = LINE('',#166320,#166321); +#166320 = CARTESIAN_POINT('',(131.135891,-102.172919,1.585)); +#166321 = VECTOR('',#166322,1.); +#166322 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#166323 = PLANE('',#166324); +#166324 = AXIS2_PLACEMENT_3D('',#166325,#166326,#166327); +#166325 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166326 = DIRECTION('',(0.,0.,1.)); +#166327 = DIRECTION('',(1.,0.,-0.)); +#166328 = SHELL_BASED_SURFACE_MODEL('',(#166329)); +#166329 = OPEN_SHELL('',(#166330)); +#166330 = ADVANCED_FACE('',(#166331),#166466,.T.); +#166331 = FACE_BOUND('',#166332,.F.); +#166332 = EDGE_LOOP('',(#166333,#166344,#166352,#166360,#166368,#166377, + #166385,#166393,#166402,#166410,#166418,#166427,#166435,#166443, + #166452,#166460)); +#166333 = ORIENTED_EDGE('',*,*,#166334,.T.); +#166334 = EDGE_CURVE('',#166335,#166337,#166339,.T.); +#166335 = VERTEX_POINT('',#166336); +#166336 = CARTESIAN_POINT('',(131.874238,-101.991051,1.585)); +#166337 = VERTEX_POINT('',#166338); +#166338 = CARTESIAN_POINT('',(131.991372,-102.074018,1.585)); +#166339 = CIRCLE('',#166340,7.499955990673E-02); +#166340 = AXIS2_PLACEMENT_3D('',#166341,#166342,#166343); +#166341 = CARTESIAN_POINT('',(131.92022150095,-102.0503000643,1.585)); +#166342 = DIRECTION('',(0.,0.,-1.)); +#166343 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#166344 = ORIENTED_EDGE('',*,*,#166345,.T.); +#166345 = EDGE_CURVE('',#166337,#166346,#166348,.T.); +#166346 = VERTEX_POINT('',#166347); +#166347 = CARTESIAN_POINT('',(131.786183,-102.689585,1.585)); +#166348 = LINE('',#166349,#166350); +#166349 = CARTESIAN_POINT('',(131.991372,-102.074018,1.585)); +#166350 = VECTOR('',#166351,1.); +#166351 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#166352 = ORIENTED_EDGE('',*,*,#166353,.T.); +#166353 = EDGE_CURVE('',#166346,#166354,#166356,.T.); +#166354 = VERTEX_POINT('',#166355); +#166355 = CARTESIAN_POINT('',(132.083316,-102.689585,1.585)); +#166356 = LINE('',#166357,#166358); +#166357 = CARTESIAN_POINT('',(131.786183,-102.689585,1.585)); +#166358 = VECTOR('',#166359,1.); +#166359 = DIRECTION('',(1.,0.,0.)); +#166360 = ORIENTED_EDGE('',*,*,#166361,.T.); +#166361 = EDGE_CURVE('',#166354,#166362,#166364,.T.); +#166362 = VERTEX_POINT('',#166363); +#166363 = CARTESIAN_POINT('',(132.084757,-102.41662,1.585)); +#166364 = LINE('',#166365,#166366); +#166365 = CARTESIAN_POINT('',(132.083316,-102.689585,1.585)); +#166366 = VECTOR('',#166367,1.); +#166367 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#166368 = ORIENTED_EDGE('',*,*,#166369,.T.); +#166369 = EDGE_CURVE('',#166362,#166370,#166372,.T.); +#166370 = VERTEX_POINT('',#166371); +#166371 = CARTESIAN_POINT('',(132.233316,-102.431252,1.585)); +#166372 = CIRCLE('',#166373,7.500006711465E-02); +#166373 = AXIS2_PLACEMENT_3D('',#166374,#166375,#166376); +#166374 = CARTESIAN_POINT('',(132.15831593288,-102.4312519328,1.585)); +#166375 = DIRECTION('',(0.,0.,-1.)); +#166376 = DIRECTION('',(-0.980784894138,0.195092263892,0.)); +#166377 = ORIENTED_EDGE('',*,*,#166378,.T.); +#166378 = EDGE_CURVE('',#166370,#166379,#166381,.T.); +#166379 = VERTEX_POINT('',#166380); +#166380 = CARTESIAN_POINT('',(132.233316,-102.689585,1.585)); +#166381 = LINE('',#166382,#166383); +#166382 = CARTESIAN_POINT('',(132.233316,-102.431252,1.585)); +#166383 = VECTOR('',#166384,1.); +#166384 = DIRECTION('',(0.,-1.,0.)); +#166385 = ORIENTED_EDGE('',*,*,#166386,.T.); +#166386 = EDGE_CURVE('',#166379,#166387,#166389,.T.); +#166387 = VERTEX_POINT('',#166388); +#166388 = CARTESIAN_POINT('',(132.315805,-102.691026,1.585)); +#166389 = LINE('',#166390,#166391); +#166390 = CARTESIAN_POINT('',(132.233316,-102.689585,1.585)); +#166391 = VECTOR('',#166392,1.); +#166392 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#166393 = ORIENTED_EDGE('',*,*,#166394,.T.); +#166394 = EDGE_CURVE('',#166387,#166395,#166397,.T.); +#166395 = VERTEX_POINT('',#166396); +#166396 = CARTESIAN_POINT('',(132.301173,-102.839585,1.585)); +#166397 = CIRCLE('',#166398,7.500006711464E-02); +#166398 = AXIS2_PLACEMENT_3D('',#166399,#166400,#166401); +#166399 = CARTESIAN_POINT('',(132.30117306711,-102.7645849328,1.585)); +#166400 = DIRECTION('',(0.,0.,-1.)); +#166401 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#166402 = ORIENTED_EDGE('',*,*,#166403,.T.); +#166403 = EDGE_CURVE('',#166395,#166404,#166406,.T.); +#166404 = VERTEX_POINT('',#166405); +#166405 = CARTESIAN_POINT('',(132.233316,-102.839585,1.585)); +#166406 = LINE('',#166407,#166408); +#166407 = CARTESIAN_POINT('',(132.301173,-102.839585,1.585)); +#166408 = VECTOR('',#166409,1.); +#166409 = DIRECTION('',(-1.,0.,0.)); +#166410 = ORIENTED_EDGE('',*,*,#166411,.T.); +#166411 = EDGE_CURVE('',#166404,#166412,#166414,.T.); +#166412 = VERTEX_POINT('',#166413); +#166413 = CARTESIAN_POINT('',(132.231875,-103.112551,1.585)); +#166414 = LINE('',#166415,#166416); +#166415 = CARTESIAN_POINT('',(132.233316,-102.839585,1.585)); +#166416 = VECTOR('',#166417,1.); +#166417 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#166418 = ORIENTED_EDGE('',*,*,#166419,.T.); +#166419 = EDGE_CURVE('',#166412,#166420,#166422,.T.); +#166420 = VERTEX_POINT('',#166421); +#166421 = CARTESIAN_POINT('',(132.083316,-103.097919,1.585)); +#166422 = CIRCLE('',#166423,7.500006711464E-02); +#166423 = AXIS2_PLACEMENT_3D('',#166424,#166425,#166426); +#166424 = CARTESIAN_POINT('',(132.15831606711,-103.0979190671,1.585)); +#166425 = DIRECTION('',(-0.,0.,-1.)); +#166426 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#166427 = ORIENTED_EDGE('',*,*,#166428,.T.); +#166428 = EDGE_CURVE('',#166420,#166429,#166431,.T.); +#166429 = VERTEX_POINT('',#166430); +#166430 = CARTESIAN_POINT('',(132.083316,-102.839585,1.585)); +#166431 = LINE('',#166432,#166433); +#166432 = CARTESIAN_POINT('',(132.083316,-103.097919,1.585)); +#166433 = VECTOR('',#166434,1.); +#166434 = DIRECTION('',(0.,1.,0.)); +#166435 = ORIENTED_EDGE('',*,*,#166436,.T.); +#166436 = EDGE_CURVE('',#166429,#166437,#166439,.T.); +#166437 = VERTEX_POINT('',#166438); +#166438 = CARTESIAN_POINT('',(131.667494,-102.838144,1.585)); +#166439 = LINE('',#166440,#166441); +#166440 = CARTESIAN_POINT('',(132.083316,-102.839585,1.585)); +#166441 = VECTOR('',#166442,1.); +#166442 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#166443 = ORIENTED_EDGE('',*,*,#166444,.T.); +#166444 = EDGE_CURVE('',#166437,#166445,#166447,.T.); +#166445 = VERTEX_POINT('',#166446); +#166446 = CARTESIAN_POINT('',(131.610975,-102.740868,1.585)); +#166447 = CIRCLE('',#166448,7.499997045039E-02); +#166448 = AXIS2_PLACEMENT_3D('',#166449,#166450,#166451); +#166449 = CARTESIAN_POINT('',(131.68212617257,-102.7645852133,1.585)); +#166450 = DIRECTION('',(0.,0.,-1.)); +#166451 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#166452 = ORIENTED_EDGE('',*,*,#166453,.T.); +#166453 = EDGE_CURVE('',#166445,#166454,#166456,.T.); +#166454 = VERTEX_POINT('',#166455); +#166455 = CARTESIAN_POINT('',(131.855064,-102.013158,1.585)); +#166456 = LINE('',#166457,#166458); +#166457 = CARTESIAN_POINT('',(131.610975,-102.740868,1.585)); +#166458 = VECTOR('',#166459,1.); +#166459 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#166460 = ORIENTED_EDGE('',*,*,#166461,.T.); +#166461 = EDGE_CURVE('',#166454,#166335,#166462,.T.); +#166462 = LINE('',#166463,#166464); +#166463 = CARTESIAN_POINT('',(131.855064,-102.013158,1.585)); +#166464 = VECTOR('',#166465,1.); +#166465 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#166466 = PLANE('',#166467); +#166467 = AXIS2_PLACEMENT_3D('',#166468,#166469,#166470); +#166468 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166469 = DIRECTION('',(0.,0.,1.)); +#166470 = DIRECTION('',(1.,0.,-0.)); +#166471 = SHELL_BASED_SURFACE_MODEL('',(#166472)); +#166472 = OPEN_SHELL('',(#166473)); +#166473 = ADVANCED_FACE('',(#166474),#166510,.T.); +#166474 = FACE_BOUND('',#166475,.F.); +#166475 = EDGE_LOOP('',(#166476,#166487,#166495,#166504)); +#166476 = ORIENTED_EDGE('',*,*,#166477,.T.); +#166477 = EDGE_CURVE('',#166478,#166480,#166482,.T.); +#166478 = VERTEX_POINT('',#166479); +#166479 = CARTESIAN_POINT('',(119.955398,-103.0231,1.585)); +#166480 = VERTEX_POINT('',#166481); +#166481 = CARTESIAN_POINT('',(119.955398,-102.9031,1.585)); +#166482 = CIRCLE('',#166483,6.000000000043E-02); +#166483 = AXIS2_PLACEMENT_3D('',#166484,#166485,#166486); +#166484 = CARTESIAN_POINT('',(119.95539777441,-102.9631,1.585)); +#166485 = DIRECTION('',(0.,0.,-1.)); +#166486 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#166487 = ORIENTED_EDGE('',*,*,#166488,.T.); +#166488 = EDGE_CURVE('',#166480,#166489,#166491,.T.); +#166489 = VERTEX_POINT('',#166490); +#166490 = CARTESIAN_POINT('',(121.377902,-102.9031,1.585)); +#166491 = LINE('',#166492,#166493); +#166492 = CARTESIAN_POINT('',(119.955398,-102.9031,1.585)); +#166493 = VECTOR('',#166494,1.); +#166494 = DIRECTION('',(1.,0.,0.)); +#166495 = ORIENTED_EDGE('',*,*,#166496,.T.); +#166496 = EDGE_CURVE('',#166489,#166497,#166499,.T.); +#166497 = VERTEX_POINT('',#166498); +#166498 = CARTESIAN_POINT('',(121.377902,-103.0231,1.585)); +#166499 = CIRCLE('',#166500,6.000000000042E-02); +#166500 = AXIS2_PLACEMENT_3D('',#166501,#166502,#166503); +#166501 = CARTESIAN_POINT('',(121.37790222558,-102.9631,1.585)); +#166502 = DIRECTION('',(0.,0.,-1.)); +#166503 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166504 = ORIENTED_EDGE('',*,*,#166505,.T.); +#166505 = EDGE_CURVE('',#166497,#166478,#166506,.T.); +#166506 = LINE('',#166507,#166508); +#166507 = CARTESIAN_POINT('',(121.377902,-103.0231,1.585)); +#166508 = VECTOR('',#166509,1.); +#166509 = DIRECTION('',(-1.,0.,0.)); +#166510 = PLANE('',#166511); +#166511 = AXIS2_PLACEMENT_3D('',#166512,#166513,#166514); +#166512 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166513 = DIRECTION('',(0.,0.,1.)); +#166514 = DIRECTION('',(1.,0.,-0.)); +#166515 = SHELL_BASED_SURFACE_MODEL('',(#166516)); +#166516 = OPEN_SHELL('',(#166517)); +#166517 = ADVANCED_FACE('',(#166518),#166554,.T.); +#166518 = FACE_BOUND('',#166519,.F.); +#166519 = EDGE_LOOP('',(#166520,#166531,#166539,#166548)); +#166520 = ORIENTED_EDGE('',*,*,#166521,.T.); +#166521 = EDGE_CURVE('',#166522,#166524,#166526,.T.); +#166522 = VERTEX_POINT('',#166523); +#166523 = CARTESIAN_POINT('',(125.455398,-103.0231,1.585)); +#166524 = VERTEX_POINT('',#166525); +#166525 = CARTESIAN_POINT('',(125.455398,-102.9031,1.585)); +#166526 = CIRCLE('',#166527,6.000000000043E-02); +#166527 = AXIS2_PLACEMENT_3D('',#166528,#166529,#166530); +#166528 = CARTESIAN_POINT('',(125.45539777441,-102.9631,1.585)); +#166529 = DIRECTION('',(0.,0.,-1.)); +#166530 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#166531 = ORIENTED_EDGE('',*,*,#166532,.T.); +#166532 = EDGE_CURVE('',#166524,#166533,#166535,.T.); +#166533 = VERTEX_POINT('',#166534); +#166534 = CARTESIAN_POINT('',(126.877902,-102.9031,1.585)); +#166535 = LINE('',#166536,#166537); +#166536 = CARTESIAN_POINT('',(125.455398,-102.9031,1.585)); +#166537 = VECTOR('',#166538,1.); +#166538 = DIRECTION('',(1.,0.,0.)); +#166539 = ORIENTED_EDGE('',*,*,#166540,.T.); +#166540 = EDGE_CURVE('',#166533,#166541,#166543,.T.); +#166541 = VERTEX_POINT('',#166542); +#166542 = CARTESIAN_POINT('',(126.877902,-103.0231,1.585)); +#166543 = CIRCLE('',#166544,6.000000000042E-02); +#166544 = AXIS2_PLACEMENT_3D('',#166545,#166546,#166547); +#166545 = CARTESIAN_POINT('',(126.87790222558,-102.9631,1.585)); +#166546 = DIRECTION('',(0.,0.,-1.)); +#166547 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166548 = ORIENTED_EDGE('',*,*,#166549,.T.); +#166549 = EDGE_CURVE('',#166541,#166522,#166550,.T.); +#166550 = LINE('',#166551,#166552); +#166551 = CARTESIAN_POINT('',(126.877902,-103.0231,1.585)); +#166552 = VECTOR('',#166553,1.); +#166553 = DIRECTION('',(-1.,0.,0.)); +#166554 = PLANE('',#166555); +#166555 = AXIS2_PLACEMENT_3D('',#166556,#166557,#166558); +#166556 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166557 = DIRECTION('',(0.,0.,1.)); +#166558 = DIRECTION('',(1.,0.,-0.)); +#166559 = SHELL_BASED_SURFACE_MODEL('',(#166560)); +#166560 = OPEN_SHELL('',(#166561)); +#166561 = ADVANCED_FACE('',(#166562),#166598,.T.); +#166562 = FACE_BOUND('',#166563,.F.); +#166563 = EDGE_LOOP('',(#166564,#166575,#166583,#166592)); +#166564 = ORIENTED_EDGE('',*,*,#166565,.T.); +#166565 = EDGE_CURVE('',#166566,#166568,#166570,.T.); +#166566 = VERTEX_POINT('',#166567); +#166567 = CARTESIAN_POINT('',(96.629392,-102.9056,1.585)); +#166568 = VERTEX_POINT('',#166569); +#166569 = CARTESIAN_POINT('',(96.629392,-102.7856,1.585)); +#166570 = CIRCLE('',#166571,6.000000000043E-02); +#166571 = AXIS2_PLACEMENT_3D('',#166572,#166573,#166574); +#166572 = CARTESIAN_POINT('',(96.629391774412,-102.8456,1.585)); +#166573 = DIRECTION('',(0.,0.,-1.)); +#166574 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166575 = ORIENTED_EDGE('',*,*,#166576,.T.); +#166576 = EDGE_CURVE('',#166568,#166577,#166579,.T.); +#166577 = VERTEX_POINT('',#166578); +#166578 = CARTESIAN_POINT('',(97.103908,-102.7856,1.585)); +#166579 = LINE('',#166580,#166581); +#166580 = CARTESIAN_POINT('',(96.629392,-102.7856,1.585)); +#166581 = VECTOR('',#166582,1.); +#166582 = DIRECTION('',(1.,0.,0.)); +#166583 = ORIENTED_EDGE('',*,*,#166584,.T.); +#166584 = EDGE_CURVE('',#166577,#166585,#166587,.T.); +#166585 = VERTEX_POINT('',#166586); +#166586 = CARTESIAN_POINT('',(97.103908,-102.9056,1.585)); +#166587 = CIRCLE('',#166588,6.000000000043E-02); +#166588 = AXIS2_PLACEMENT_3D('',#166589,#166590,#166591); +#166589 = CARTESIAN_POINT('',(97.103908225588,-102.8456,1.585)); +#166590 = DIRECTION('',(0.,0.,-1.)); +#166591 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166592 = ORIENTED_EDGE('',*,*,#166593,.T.); +#166593 = EDGE_CURVE('',#166585,#166566,#166594,.T.); +#166594 = LINE('',#166595,#166596); +#166595 = CARTESIAN_POINT('',(97.103908,-102.9056,1.585)); +#166596 = VECTOR('',#166597,1.); +#166597 = DIRECTION('',(-1.,0.,0.)); +#166598 = PLANE('',#166599); +#166599 = AXIS2_PLACEMENT_3D('',#166600,#166601,#166602); +#166600 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166601 = DIRECTION('',(0.,0.,1.)); +#166602 = DIRECTION('',(1.,0.,-0.)); +#166603 = SHELL_BASED_SURFACE_MODEL('',(#166604)); +#166604 = OPEN_SHELL('',(#166605)); +#166605 = ADVANCED_FACE('',(#166606),#166642,.T.); +#166606 = FACE_BOUND('',#166607,.F.); +#166607 = EDGE_LOOP('',(#166608,#166619,#166627,#166636)); +#166608 = ORIENTED_EDGE('',*,*,#166609,.T.); +#166609 = EDGE_CURVE('',#166610,#166612,#166614,.T.); +#166610 = VERTEX_POINT('',#166611); +#166611 = CARTESIAN_POINT('',(100.629392,-102.9056,1.585)); +#166612 = VERTEX_POINT('',#166613); +#166613 = CARTESIAN_POINT('',(100.629392,-102.7856,1.585)); +#166614 = CIRCLE('',#166615,6.000000000043E-02); +#166615 = AXIS2_PLACEMENT_3D('',#166616,#166617,#166618); +#166616 = CARTESIAN_POINT('',(100.62939177441,-102.8456,1.585)); +#166617 = DIRECTION('',(0.,0.,-1.)); +#166618 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166619 = ORIENTED_EDGE('',*,*,#166620,.T.); +#166620 = EDGE_CURVE('',#166612,#166621,#166623,.T.); +#166621 = VERTEX_POINT('',#166622); +#166622 = CARTESIAN_POINT('',(101.103908,-102.7856,1.585)); +#166623 = LINE('',#166624,#166625); +#166624 = CARTESIAN_POINT('',(100.629392,-102.7856,1.585)); +#166625 = VECTOR('',#166626,1.); +#166626 = DIRECTION('',(1.,0.,0.)); +#166627 = ORIENTED_EDGE('',*,*,#166628,.T.); +#166628 = EDGE_CURVE('',#166621,#166629,#166631,.T.); +#166629 = VERTEX_POINT('',#166630); +#166630 = CARTESIAN_POINT('',(101.103908,-102.9056,1.585)); +#166631 = CIRCLE('',#166632,6.000000000043E-02); +#166632 = AXIS2_PLACEMENT_3D('',#166633,#166634,#166635); +#166633 = CARTESIAN_POINT('',(101.10390822558,-102.8456,1.585)); +#166634 = DIRECTION('',(0.,0.,-1.)); +#166635 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166636 = ORIENTED_EDGE('',*,*,#166637,.T.); +#166637 = EDGE_CURVE('',#166629,#166610,#166638,.T.); +#166638 = LINE('',#166639,#166640); +#166639 = CARTESIAN_POINT('',(101.103908,-102.9056,1.585)); +#166640 = VECTOR('',#166641,1.); +#166641 = DIRECTION('',(-1.,0.,0.)); +#166642 = PLANE('',#166643); +#166643 = AXIS2_PLACEMENT_3D('',#166644,#166645,#166646); +#166644 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166645 = DIRECTION('',(0.,0.,1.)); +#166646 = DIRECTION('',(1.,0.,-0.)); +#166647 = SHELL_BASED_SURFACE_MODEL('',(#166648)); +#166648 = OPEN_SHELL('',(#166649)); +#166649 = ADVANCED_FACE('',(#166650),#166686,.T.); +#166650 = FACE_BOUND('',#166651,.F.); +#166651 = EDGE_LOOP('',(#166652,#166663,#166671,#166680)); +#166652 = ORIENTED_EDGE('',*,*,#166653,.T.); +#166653 = EDGE_CURVE('',#166654,#166656,#166658,.T.); +#166654 = VERTEX_POINT('',#166655); +#166655 = CARTESIAN_POINT('',(104.629392,-102.9056,1.585)); +#166656 = VERTEX_POINT('',#166657); +#166657 = CARTESIAN_POINT('',(104.629392,-102.7856,1.585)); +#166658 = CIRCLE('',#166659,6.000000000043E-02); +#166659 = AXIS2_PLACEMENT_3D('',#166660,#166661,#166662); +#166660 = CARTESIAN_POINT('',(104.62939177441,-102.8456,1.585)); +#166661 = DIRECTION('',(0.,0.,-1.)); +#166662 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166663 = ORIENTED_EDGE('',*,*,#166664,.T.); +#166664 = EDGE_CURVE('',#166656,#166665,#166667,.T.); +#166665 = VERTEX_POINT('',#166666); +#166666 = CARTESIAN_POINT('',(105.103908,-102.7856,1.585)); +#166667 = LINE('',#166668,#166669); +#166668 = CARTESIAN_POINT('',(104.629392,-102.7856,1.585)); +#166669 = VECTOR('',#166670,1.); +#166670 = DIRECTION('',(1.,0.,0.)); +#166671 = ORIENTED_EDGE('',*,*,#166672,.T.); +#166672 = EDGE_CURVE('',#166665,#166673,#166675,.T.); +#166673 = VERTEX_POINT('',#166674); +#166674 = CARTESIAN_POINT('',(105.103908,-102.9056,1.585)); +#166675 = CIRCLE('',#166676,6.000000000043E-02); +#166676 = AXIS2_PLACEMENT_3D('',#166677,#166678,#166679); +#166677 = CARTESIAN_POINT('',(105.10390822558,-102.8456,1.585)); +#166678 = DIRECTION('',(0.,0.,-1.)); +#166679 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166680 = ORIENTED_EDGE('',*,*,#166681,.T.); +#166681 = EDGE_CURVE('',#166673,#166654,#166682,.T.); +#166682 = LINE('',#166683,#166684); +#166683 = CARTESIAN_POINT('',(105.103908,-102.9056,1.585)); +#166684 = VECTOR('',#166685,1.); +#166685 = DIRECTION('',(-1.,0.,0.)); +#166686 = PLANE('',#166687); +#166687 = AXIS2_PLACEMENT_3D('',#166688,#166689,#166690); +#166688 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166689 = DIRECTION('',(0.,0.,1.)); +#166690 = DIRECTION('',(1.,0.,-0.)); +#166691 = SHELL_BASED_SURFACE_MODEL('',(#166692)); +#166692 = OPEN_SHELL('',(#166693)); +#166693 = ADVANCED_FACE('',(#166694),#166730,.T.); +#166694 = FACE_BOUND('',#166695,.F.); +#166695 = EDGE_LOOP('',(#166696,#166707,#166715,#166724)); +#166696 = ORIENTED_EDGE('',*,*,#166697,.T.); +#166697 = EDGE_CURVE('',#166698,#166700,#166702,.T.); +#166698 = VERTEX_POINT('',#166699); +#166699 = CARTESIAN_POINT('',(108.129392,-102.9056,1.585)); +#166700 = VERTEX_POINT('',#166701); +#166701 = CARTESIAN_POINT('',(108.129392,-102.7856,1.585)); +#166702 = CIRCLE('',#166703,6.000000000043E-02); +#166703 = AXIS2_PLACEMENT_3D('',#166704,#166705,#166706); +#166704 = CARTESIAN_POINT('',(108.12939177441,-102.8456,1.585)); +#166705 = DIRECTION('',(0.,0.,-1.)); +#166706 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166707 = ORIENTED_EDGE('',*,*,#166708,.T.); +#166708 = EDGE_CURVE('',#166700,#166709,#166711,.T.); +#166709 = VERTEX_POINT('',#166710); +#166710 = CARTESIAN_POINT('',(108.603908,-102.7856,1.585)); +#166711 = LINE('',#166712,#166713); +#166712 = CARTESIAN_POINT('',(108.129392,-102.7856,1.585)); +#166713 = VECTOR('',#166714,1.); +#166714 = DIRECTION('',(1.,0.,0.)); +#166715 = ORIENTED_EDGE('',*,*,#166716,.T.); +#166716 = EDGE_CURVE('',#166709,#166717,#166719,.T.); +#166717 = VERTEX_POINT('',#166718); +#166718 = CARTESIAN_POINT('',(108.603908,-102.9056,1.585)); +#166719 = CIRCLE('',#166720,6.000000000043E-02); +#166720 = AXIS2_PLACEMENT_3D('',#166721,#166722,#166723); +#166721 = CARTESIAN_POINT('',(108.60390822558,-102.8456,1.585)); +#166722 = DIRECTION('',(0.,0.,-1.)); +#166723 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166724 = ORIENTED_EDGE('',*,*,#166725,.T.); +#166725 = EDGE_CURVE('',#166717,#166698,#166726,.T.); +#166726 = LINE('',#166727,#166728); +#166727 = CARTESIAN_POINT('',(108.603908,-102.9056,1.585)); +#166728 = VECTOR('',#166729,1.); +#166729 = DIRECTION('',(-1.,0.,0.)); +#166730 = PLANE('',#166731); +#166731 = AXIS2_PLACEMENT_3D('',#166732,#166733,#166734); +#166732 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166733 = DIRECTION('',(0.,0.,1.)); +#166734 = DIRECTION('',(1.,0.,-0.)); +#166735 = SHELL_BASED_SURFACE_MODEL('',(#166736)); +#166736 = OPEN_SHELL('',(#166737)); +#166737 = ADVANCED_FACE('',(#166738),#166774,.T.); +#166738 = FACE_BOUND('',#166739,.F.); +#166739 = EDGE_LOOP('',(#166740,#166751,#166759,#166768)); +#166740 = ORIENTED_EDGE('',*,*,#166741,.T.); +#166741 = EDGE_CURVE('',#166742,#166744,#166746,.T.); +#166742 = VERTEX_POINT('',#166743); +#166743 = CARTESIAN_POINT('',(112.129392,-102.9056,1.585)); +#166744 = VERTEX_POINT('',#166745); +#166745 = CARTESIAN_POINT('',(112.129392,-102.7856,1.585)); +#166746 = CIRCLE('',#166747,6.000000000043E-02); +#166747 = AXIS2_PLACEMENT_3D('',#166748,#166749,#166750); +#166748 = CARTESIAN_POINT('',(112.12939177441,-102.8456,1.585)); +#166749 = DIRECTION('',(0.,0.,-1.)); +#166750 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#166751 = ORIENTED_EDGE('',*,*,#166752,.T.); +#166752 = EDGE_CURVE('',#166744,#166753,#166755,.T.); +#166753 = VERTEX_POINT('',#166754); +#166754 = CARTESIAN_POINT('',(112.603908,-102.7856,1.585)); +#166755 = LINE('',#166756,#166757); +#166756 = CARTESIAN_POINT('',(112.129392,-102.7856,1.585)); +#166757 = VECTOR('',#166758,1.); +#166758 = DIRECTION('',(1.,0.,0.)); +#166759 = ORIENTED_EDGE('',*,*,#166760,.T.); +#166760 = EDGE_CURVE('',#166753,#166761,#166763,.T.); +#166761 = VERTEX_POINT('',#166762); +#166762 = CARTESIAN_POINT('',(112.603908,-102.9056,1.585)); +#166763 = CIRCLE('',#166764,6.000000000043E-02); +#166764 = AXIS2_PLACEMENT_3D('',#166765,#166766,#166767); +#166765 = CARTESIAN_POINT('',(112.60390822558,-102.8456,1.585)); +#166766 = DIRECTION('',(0.,0.,-1.)); +#166767 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#166768 = ORIENTED_EDGE('',*,*,#166769,.T.); +#166769 = EDGE_CURVE('',#166761,#166742,#166770,.T.); +#166770 = LINE('',#166771,#166772); +#166771 = CARTESIAN_POINT('',(112.603908,-102.9056,1.585)); +#166772 = VECTOR('',#166773,1.); +#166773 = DIRECTION('',(-1.,0.,0.)); +#166774 = PLANE('',#166775); +#166775 = AXIS2_PLACEMENT_3D('',#166776,#166777,#166778); +#166776 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166777 = DIRECTION('',(0.,0.,1.)); +#166778 = DIRECTION('',(1.,0.,-0.)); +#166779 = SHELL_BASED_SURFACE_MODEL('',(#166780)); +#166780 = OPEN_SHELL('',(#166781)); +#166781 = ADVANCED_FACE('',(#166782),#166818,.T.); +#166782 = FACE_BOUND('',#166783,.F.); +#166783 = EDGE_LOOP('',(#166784,#166795,#166803,#166812)); +#166784 = ORIENTED_EDGE('',*,*,#166785,.T.); +#166785 = EDGE_CURVE('',#166786,#166788,#166790,.T.); +#166786 = VERTEX_POINT('',#166787); +#166787 = CARTESIAN_POINT('',(179.279392,-102.9056,1.585)); +#166788 = VERTEX_POINT('',#166789); +#166789 = CARTESIAN_POINT('',(179.279392,-102.7856,1.585)); +#166790 = CIRCLE('',#166791,6.000000000043E-02); +#166791 = AXIS2_PLACEMENT_3D('',#166792,#166793,#166794); +#166792 = CARTESIAN_POINT('',(179.27939177441,-102.8456,1.585)); +#166793 = DIRECTION('',(0.,0.,-1.)); +#166794 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#166795 = ORIENTED_EDGE('',*,*,#166796,.T.); +#166796 = EDGE_CURVE('',#166788,#166797,#166799,.T.); +#166797 = VERTEX_POINT('',#166798); +#166798 = CARTESIAN_POINT('',(179.753908,-102.7856,1.585)); +#166799 = LINE('',#166800,#166801); +#166800 = CARTESIAN_POINT('',(179.279392,-102.7856,1.585)); +#166801 = VECTOR('',#166802,1.); +#166802 = DIRECTION('',(1.,0.,0.)); +#166803 = ORIENTED_EDGE('',*,*,#166804,.T.); +#166804 = EDGE_CURVE('',#166797,#166805,#166807,.T.); +#166805 = VERTEX_POINT('',#166806); +#166806 = CARTESIAN_POINT('',(179.753908,-102.9056,1.585)); +#166807 = CIRCLE('',#166808,6.000000000042E-02); +#166808 = AXIS2_PLACEMENT_3D('',#166809,#166810,#166811); +#166809 = CARTESIAN_POINT('',(179.75390822558,-102.8456,1.585)); +#166810 = DIRECTION('',(0.,0.,-1.)); +#166811 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#166812 = ORIENTED_EDGE('',*,*,#166813,.T.); +#166813 = EDGE_CURVE('',#166805,#166786,#166814,.T.); +#166814 = LINE('',#166815,#166816); +#166815 = CARTESIAN_POINT('',(179.753908,-102.9056,1.585)); +#166816 = VECTOR('',#166817,1.); +#166817 = DIRECTION('',(-1.,0.,0.)); +#166818 = PLANE('',#166819); +#166819 = AXIS2_PLACEMENT_3D('',#166820,#166821,#166822); +#166820 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166821 = DIRECTION('',(0.,0.,1.)); +#166822 = DIRECTION('',(1.,0.,-0.)); +#166823 = SHELL_BASED_SURFACE_MODEL('',(#166824)); +#166824 = OPEN_SHELL('',(#166825)); +#166825 = ADVANCED_FACE('',(#166826),#166894,.T.); +#166826 = FACE_BOUND('',#166827,.F.); +#166827 = EDGE_LOOP('',(#166828,#166839,#166847,#166855,#166863,#166871, + #166880,#166888)); +#166828 = ORIENTED_EDGE('',*,*,#166829,.T.); +#166829 = EDGE_CURVE('',#166830,#166832,#166834,.T.); +#166830 = VERTEX_POINT('',#166831); +#166831 = CARTESIAN_POINT('',(165.64165,-100.7331,1.585)); +#166832 = VERTEX_POINT('',#166833); +#166833 = CARTESIAN_POINT('',(165.64165,-100.6131,1.585)); +#166834 = CIRCLE('',#166835,6.000000000042E-02); +#166835 = AXIS2_PLACEMENT_3D('',#166836,#166837,#166838); +#166836 = CARTESIAN_POINT('',(165.64164977441,-100.6731,1.585)); +#166837 = DIRECTION('',(0.,0.,-1.)); +#166838 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#166839 = ORIENTED_EDGE('',*,*,#166840,.T.); +#166840 = EDGE_CURVE('',#166832,#166841,#166843,.T.); +#166841 = VERTEX_POINT('',#166842); +#166842 = CARTESIAN_POINT('',(169.74165,-100.6131,1.585)); +#166843 = LINE('',#166844,#166845); +#166844 = CARTESIAN_POINT('',(165.64165,-100.6131,1.585)); +#166845 = VECTOR('',#166846,1.); +#166846 = DIRECTION('',(1.,0.,0.)); +#166847 = ORIENTED_EDGE('',*,*,#166848,.T.); +#166848 = EDGE_CURVE('',#166841,#166849,#166851,.T.); +#166849 = VERTEX_POINT('',#166850); +#166850 = CARTESIAN_POINT('',(169.764611,-100.617667,1.585)); +#166851 = LINE('',#166852,#166853); +#166852 = CARTESIAN_POINT('',(169.74165,-100.6131,1.585)); +#166853 = VECTOR('',#166854,1.); +#166854 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#166855 = ORIENTED_EDGE('',*,*,#166856,.T.); +#166856 = EDGE_CURVE('',#166849,#166857,#166859,.T.); +#166857 = VERTEX_POINT('',#166858); +#166858 = CARTESIAN_POINT('',(169.784076,-100.630674,1.585)); +#166859 = LINE('',#166860,#166861); +#166860 = CARTESIAN_POINT('',(169.764611,-100.617667,1.585)); +#166861 = VECTOR('',#166862,1.); +#166862 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#166863 = ORIENTED_EDGE('',*,*,#166864,.T.); +#166864 = EDGE_CURVE('',#166857,#166865,#166867,.T.); +#166865 = VERTEX_POINT('',#166866); +#166866 = CARTESIAN_POINT('',(171.884076,-102.730673,1.585)); +#166867 = LINE('',#166868,#166869); +#166868 = CARTESIAN_POINT('',(169.784076,-100.630674,1.585)); +#166869 = VECTOR('',#166870,1.); +#166870 = DIRECTION('',(0.707106949545,-0.707106612828,0.)); +#166871 = ORIENTED_EDGE('',*,*,#166872,.T.); +#166872 = EDGE_CURVE('',#166865,#166873,#166875,.T.); +#166873 = VERTEX_POINT('',#166874); +#166874 = CARTESIAN_POINT('',(171.799223,-102.815526,1.585)); +#166875 = CIRCLE('',#166876,6.000013170922E-02); +#166876 = AXIS2_PLACEMENT_3D('',#166877,#166878,#166879); +#166877 = CARTESIAN_POINT('',(171.8416500587,-102.7731000587,1.585)); +#166878 = DIRECTION('',(0.,0.,-1.)); +#166879 = DIRECTION('',(0.707097469327,0.707116092923,0.)); +#166880 = ORIENTED_EDGE('',*,*,#166881,.T.); +#166881 = EDGE_CURVE('',#166873,#166882,#166884,.T.); +#166882 = VERTEX_POINT('',#166883); +#166883 = CARTESIAN_POINT('',(169.716798,-100.7331,1.585)); +#166884 = LINE('',#166885,#166886); +#166885 = CARTESIAN_POINT('',(171.799223,-102.815526,1.585)); +#166886 = VECTOR('',#166887,1.); +#166887 = DIRECTION('',(-0.707106611407,0.707106950966,0.)); +#166888 = ORIENTED_EDGE('',*,*,#166889,.T.); +#166889 = EDGE_CURVE('',#166882,#166830,#166890,.T.); +#166890 = LINE('',#166891,#166892); +#166891 = CARTESIAN_POINT('',(169.716798,-100.7331,1.585)); +#166892 = VECTOR('',#166893,1.); +#166893 = DIRECTION('',(-1.,0.,0.)); +#166894 = PLANE('',#166895); +#166895 = AXIS2_PLACEMENT_3D('',#166896,#166897,#166898); +#166896 = CARTESIAN_POINT('',(0.,0.,1.585)); +#166897 = DIRECTION('',(0.,0.,1.)); +#166898 = DIRECTION('',(1.,0.,-0.)); +#166899 = SHELL_BASED_SURFACE_MODEL('',(#166900)); +#166900 = OPEN_SHELL('',(#166901)); +#166901 = ADVANCED_FACE('',(#166902),#167036,.T.); +#166902 = FACE_BOUND('',#166903,.F.); +#166903 = EDGE_LOOP('',(#166904,#166915,#166923,#166932,#166940,#166948, + #166956,#166964,#166973,#166981,#166989,#166997,#167006,#167014, + #167022,#167030)); +#166904 = ORIENTED_EDGE('',*,*,#166905,.T.); +#166905 = EDGE_CURVE('',#166906,#166908,#166910,.T.); +#166906 = VERTEX_POINT('',#166907); +#166907 = CARTESIAN_POINT('',(200.784801,-101.948835,1.585)); +#166908 = VERTEX_POINT('',#166909); +#166909 = CARTESIAN_POINT('',(200.901469,-102.011195,1.585)); +#166910 = CIRCLE('',#166911,7.500000000004E-02); +#166911 = AXIS2_PLACEMENT_3D('',#166912,#166913,#166914); +#166912 = CARTESIAN_POINT('',(200.826469,-102.0111950655,1.585)); +#166913 = DIRECTION('',(0.,0.,-1.)); +#166914 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#166915 = ORIENTED_EDGE('',*,*,#166916,.T.); +#166916 = EDGE_CURVE('',#166908,#166917,#166919,.T.); +#166917 = VERTEX_POINT('',#166918); +#166918 = CARTESIAN_POINT('',(200.900028,-102.597255,1.585)); +#166919 = LINE('',#166920,#166921); +#166920 = CARTESIAN_POINT('',(200.901469,-102.011195,1.585)); +#166921 = VECTOR('',#166922,1.); +#166922 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#166923 = ORIENTED_EDGE('',*,*,#166924,.T.); +#166924 = EDGE_CURVE('',#166917,#166925,#166927,.T.); +#166925 = VERTEX_POINT('',#166926); +#166926 = CARTESIAN_POINT('',(200.751469,-102.582623,1.585)); +#166927 = CIRCLE('',#166928,7.500006711464E-02); +#166928 = AXIS2_PLACEMENT_3D('',#166929,#166930,#166931); +#166929 = CARTESIAN_POINT('',(200.82646906711,-102.5826230671,1.585)); +#166930 = DIRECTION('',(-0.,0.,-1.)); +#166931 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#166932 = ORIENTED_EDGE('',*,*,#166933,.T.); +#166933 = EDGE_CURVE('',#166925,#166934,#166936,.T.); +#166934 = VERTEX_POINT('',#166935); +#166935 = CARTESIAN_POINT('',(200.751469,-102.371909,1.585)); +#166936 = LINE('',#166937,#166938); +#166937 = CARTESIAN_POINT('',(200.751469,-102.582623,1.585)); +#166938 = VECTOR('',#166939,1.); +#166939 = DIRECTION('',(0.,1.,0.)); +#166940 = ORIENTED_EDGE('',*,*,#166941,.T.); +#166941 = EDGE_CURVE('',#166934,#166942,#166944,.T.); +#166942 = VERTEX_POINT('',#166943); +#166943 = CARTESIAN_POINT('',(200.055154,-102.371909,1.585)); +#166944 = LINE('',#166945,#166946); +#166945 = CARTESIAN_POINT('',(200.751469,-102.371909,1.585)); +#166946 = VECTOR('',#166947,1.); +#166947 = DIRECTION('',(-1.,0.,0.)); +#166948 = ORIENTED_EDGE('',*,*,#166949,.T.); +#166949 = EDGE_CURVE('',#166942,#166950,#166952,.T.); +#166950 = VERTEX_POINT('',#166951); +#166951 = CARTESIAN_POINT('',(200.127683,-102.447549,1.585)); +#166952 = LINE('',#166953,#166954); +#166953 = CARTESIAN_POINT('',(200.055154,-102.371909,1.585)); +#166954 = VECTOR('',#166955,1.); +#166955 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#166956 = ORIENTED_EDGE('',*,*,#166957,.T.); +#166957 = EDGE_CURVE('',#166950,#166958,#166960,.T.); +#166958 = VERTEX_POINT('',#166959); +#166959 = CARTESIAN_POINT('',(200.18452,-102.562813,1.585)); +#166960 = LINE('',#166961,#166962); +#166961 = CARTESIAN_POINT('',(200.127683,-102.447549,1.585)); +#166962 = VECTOR('',#166963,1.); +#166963 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#166964 = ORIENTED_EDGE('',*,*,#166965,.T.); +#166965 = EDGE_CURVE('',#166958,#166966,#166968,.T.); +#166966 = VERTEX_POINT('',#166967); +#166967 = CARTESIAN_POINT('',(200.045101,-102.616164,1.585)); +#166968 = CIRCLE('',#166969,7.500029440469E-02); +#166969 = AXIS2_PLACEMENT_3D('',#166970,#166971,#166972); +#166970 = CARTESIAN_POINT('',(200.11218305397,-102.5826223513,1.585)); +#166971 = DIRECTION('',(0.,0.,-1.)); +#166972 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#166973 = ORIENTED_EDGE('',*,*,#166974,.T.); +#166974 = EDGE_CURVE('',#166966,#166975,#166977,.T.); +#166975 = VERTEX_POINT('',#166976); +#166976 = CARTESIAN_POINT('',(200.002925,-102.531812,1.585)); +#166977 = LINE('',#166978,#166979); +#166978 = CARTESIAN_POINT('',(200.045101,-102.616164,1.585)); +#166979 = VECTOR('',#166980,1.); +#166980 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#166981 = ORIENTED_EDGE('',*,*,#166982,.T.); +#166982 = EDGE_CURVE('',#166975,#166983,#166985,.T.); +#166983 = VERTEX_POINT('',#166984); +#166984 = CARTESIAN_POINT('',(199.921544,-102.450431,1.585)); +#166985 = LINE('',#166986,#166987); +#166986 = CARTESIAN_POINT('',(200.002925,-102.531812,1.585)); +#166987 = VECTOR('',#166988,1.); +#166988 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#166989 = ORIENTED_EDGE('',*,*,#166990,.T.); +#166990 = EDGE_CURVE('',#166983,#166991,#166993,.T.); +#166991 = VERTEX_POINT('',#166992); +#166992 = CARTESIAN_POINT('',(199.773491,-102.349997,1.585)); +#166993 = LINE('',#166994,#166995); +#166994 = CARTESIAN_POINT('',(199.921544,-102.450431,1.585)); +#166995 = VECTOR('',#166996,1.); +#166996 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#166997 = ORIENTED_EDGE('',*,*,#166998,.T.); +#166998 = EDGE_CURVE('',#166991,#166999,#167001,.T.); +#166999 = VERTEX_POINT('',#167000); +#167000 = CARTESIAN_POINT('',(199.826469,-102.221909,1.585)); +#167001 = CIRCLE('',#167002,7.499993751709E-02); +#167002 = AXIS2_PLACEMENT_3D('',#167003,#167004,#167005); +#167003 = CARTESIAN_POINT('',(199.82646880902,-102.2969089375,1.585)); +#167004 = DIRECTION('',(0.,0.,-1.)); +#167005 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#167006 = ORIENTED_EDGE('',*,*,#167007,.T.); +#167007 = EDGE_CURVE('',#166999,#167008,#167010,.T.); +#167008 = VERTEX_POINT('',#167009); +#167009 = CARTESIAN_POINT('',(200.751469,-102.221909,1.585)); +#167010 = LINE('',#167011,#167012); +#167011 = CARTESIAN_POINT('',(199.826469,-102.221909,1.585)); +#167012 = VECTOR('',#167013,1.); +#167013 = DIRECTION('',(1.,0.,0.)); +#167014 = ORIENTED_EDGE('',*,*,#167015,.T.); +#167015 = EDGE_CURVE('',#167008,#167016,#167018,.T.); +#167016 = VERTEX_POINT('',#167017); +#167017 = CARTESIAN_POINT('',(200.75291,-101.996563,1.585)); +#167018 = LINE('',#167019,#167020); +#167019 = CARTESIAN_POINT('',(200.751469,-102.221909,1.585)); +#167020 = VECTOR('',#167021,1.); +#167021 = DIRECTION('',(6.394480216781E-03,0.999979555102,0.)); +#167022 = ORIENTED_EDGE('',*,*,#167023,.T.); +#167023 = EDGE_CURVE('',#167016,#167024,#167026,.T.); +#167024 = VERTEX_POINT('',#167025); +#167025 = CARTESIAN_POINT('',(200.764109,-101.969527,1.585)); +#167026 = LINE('',#167027,#167028); +#167027 = CARTESIAN_POINT('',(200.75291,-101.996563,1.585)); +#167028 = VECTOR('',#167029,1.); +#167029 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#167030 = ORIENTED_EDGE('',*,*,#167031,.T.); +#167031 = EDGE_CURVE('',#167024,#166906,#167032,.T.); +#167032 = LINE('',#167033,#167034); +#167033 = CARTESIAN_POINT('',(200.764109,-101.969527,1.585)); +#167034 = VECTOR('',#167035,1.); +#167035 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#167036 = PLANE('',#167037); +#167037 = AXIS2_PLACEMENT_3D('',#167038,#167039,#167040); +#167038 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167039 = DIRECTION('',(0.,0.,1.)); +#167040 = DIRECTION('',(1.,0.,-0.)); +#167041 = SHELL_BASED_SURFACE_MODEL('',(#167042)); +#167042 = OPEN_SHELL('',(#167043)); +#167043 = ADVANCED_FACE('',(#167044),#167203,.T.); +#167044 = FACE_BOUND('',#167045,.F.); +#167045 = EDGE_LOOP('',(#167046,#167057,#167065,#167073,#167081,#167089, + #167097,#167105,#167114,#167122,#167131,#167139,#167147,#167155, + #167164,#167172,#167180,#167188,#167197)); +#167046 = ORIENTED_EDGE('',*,*,#167047,.T.); +#167047 = EDGE_CURVE('',#167048,#167050,#167052,.T.); +#167048 = VERTEX_POINT('',#167049); +#167049 = CARTESIAN_POINT('',(121.371204,-101.458456,1.585)); +#167050 = VERTEX_POINT('',#167051); +#167051 = CARTESIAN_POINT('',(121.880599,-101.467786,1.585)); +#167052 = CIRCLE('',#167053,0.450326844012); +#167053 = AXIS2_PLACEMENT_3D('',#167054,#167055,#167056); +#167054 = CARTESIAN_POINT('',(121.6191010301,-101.8344098919,1.585)); +#167055 = DIRECTION('',(0.,0.,-1.)); +#167056 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#167057 = ORIENTED_EDGE('',*,*,#167058,.T.); +#167058 = EDGE_CURVE('',#167050,#167059,#167061,.T.); +#167059 = VERTEX_POINT('',#167060); +#167060 = CARTESIAN_POINT('',(121.944052,-101.533316,1.585)); +#167061 = LINE('',#167062,#167063); +#167062 = CARTESIAN_POINT('',(121.880599,-101.467786,1.585)); +#167063 = VECTOR('',#167064,1.); +#167064 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#167065 = ORIENTED_EDGE('',*,*,#167066,.T.); +#167066 = EDGE_CURVE('',#167059,#167067,#167069,.T.); +#167067 = VERTEX_POINT('',#167068); +#167068 = CARTESIAN_POINT('',(122.002113,-101.653763,1.585)); +#167069 = LINE('',#167070,#167071); +#167070 = CARTESIAN_POINT('',(121.944052,-101.533316,1.585)); +#167071 = VECTOR('',#167072,1.); +#167072 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#167073 = ORIENTED_EDGE('',*,*,#167074,.T.); +#167074 = EDGE_CURVE('',#167067,#167075,#167077,.T.); +#167075 = VERTEX_POINT('',#167076); +#167076 = CARTESIAN_POINT('',(122.001354,-101.780095,1.585)); +#167077 = LINE('',#167078,#167079); +#167078 = CARTESIAN_POINT('',(122.002113,-101.653763,1.585)); +#167079 = VECTOR('',#167080,1.); +#167080 = DIRECTION('',(-6.007870547433E-03,-0.999981952583,0.)); +#167081 = ORIENTED_EDGE('',*,*,#167082,.T.); +#167082 = EDGE_CURVE('',#167075,#167083,#167085,.T.); +#167083 = VERTEX_POINT('',#167084); +#167084 = CARTESIAN_POINT('',(121.943296,-101.948158,1.585)); +#167085 = LINE('',#167086,#167087); +#167086 = CARTESIAN_POINT('',(122.001354,-101.780095,1.585)); +#167087 = VECTOR('',#167088,1.); +#167088 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#167089 = ORIENTED_EDGE('',*,*,#167090,.T.); +#167090 = EDGE_CURVE('',#167083,#167091,#167093,.T.); +#167091 = VERTEX_POINT('',#167092); +#167092 = CARTESIAN_POINT('',(121.490573,-102.402919,1.585)); +#167093 = LINE('',#167094,#167095); +#167094 = CARTESIAN_POINT('',(121.943296,-101.948158,1.585)); +#167095 = VECTOR('',#167096,1.); +#167096 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#167097 = ORIENTED_EDGE('',*,*,#167098,.T.); +#167098 = EDGE_CURVE('',#167091,#167099,#167101,.T.); +#167099 = VERTEX_POINT('',#167100); +#167100 = CARTESIAN_POINT('',(121.943186,-102.40436,1.585)); +#167101 = LINE('',#167102,#167103); +#167102 = CARTESIAN_POINT('',(121.490573,-102.402919,1.585)); +#167103 = VECTOR('',#167104,1.); +#167104 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#167105 = ORIENTED_EDGE('',*,*,#167106,.T.); +#167106 = EDGE_CURVE('',#167099,#167107,#167109,.T.); +#167107 = VERTEX_POINT('',#167108); +#167108 = CARTESIAN_POINT('',(121.928554,-102.552919,1.585)); +#167109 = CIRCLE('',#167110,7.500006711465E-02); +#167110 = AXIS2_PLACEMENT_3D('',#167111,#167112,#167113); +#167111 = CARTESIAN_POINT('',(121.92855406711,-102.4779189328,1.585)); +#167112 = DIRECTION('',(0.,0.,-1.)); +#167113 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#167114 = ORIENTED_EDGE('',*,*,#167115,.T.); +#167115 = EDGE_CURVE('',#167107,#167116,#167118,.T.); +#167116 = VERTEX_POINT('',#167117); +#167117 = CARTESIAN_POINT('',(121.294875,-102.551478,1.585)); +#167118 = LINE('',#167119,#167120); +#167119 = CARTESIAN_POINT('',(121.928554,-102.552919,1.585)); +#167120 = VECTOR('',#167121,1.); +#167121 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#167122 = ORIENTED_EDGE('',*,*,#167123,.T.); +#167123 = EDGE_CURVE('',#167116,#167124,#167126,.T.); +#167124 = VERTEX_POINT('',#167125); +#167125 = CARTESIAN_POINT('',(121.256474,-102.424886,1.585)); +#167126 = CIRCLE('',#167127,7.50002101311E-02); +#167127 = AXIS2_PLACEMENT_3D('',#167128,#167129,#167130); +#167128 = CARTESIAN_POINT('',(121.3095073167,-102.4779189976,1.585)); +#167129 = DIRECTION('',(0.,0.,-1.)); +#167130 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#167131 = ORIENTED_EDGE('',*,*,#167132,.T.); +#167132 = EDGE_CURVE('',#167124,#167133,#167135,.T.); +#167133 = VERTEX_POINT('',#167134); +#167134 = CARTESIAN_POINT('',(121.815382,-101.865976,1.585)); +#167135 = LINE('',#167136,#167137); +#167136 = CARTESIAN_POINT('',(121.256474,-102.424886,1.585)); +#167137 = VECTOR('',#167138,1.); +#167138 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#167139 = ORIENTED_EDGE('',*,*,#167140,.T.); +#167140 = EDGE_CURVE('',#167133,#167141,#167143,.T.); +#167141 = VERTEX_POINT('',#167142); +#167142 = CARTESIAN_POINT('',(121.853554,-101.751463,1.585)); +#167143 = LINE('',#167144,#167145); +#167144 = CARTESIAN_POINT('',(121.815382,-101.865976,1.585)); +#167145 = VECTOR('',#167146,1.); +#167146 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#167147 = ORIENTED_EDGE('',*,*,#167148,.T.); +#167148 = EDGE_CURVE('',#167141,#167149,#167151,.T.); +#167149 = VERTEX_POINT('',#167150); +#167150 = CARTESIAN_POINT('',(121.853554,-101.6861,1.585)); +#167151 = LINE('',#167152,#167153); +#167152 = CARTESIAN_POINT('',(121.853554,-101.751463,1.585)); +#167153 = VECTOR('',#167154,1.); +#167154 = DIRECTION('',(0.,1.,0.)); +#167155 = ORIENTED_EDGE('',*,*,#167156,.T.); +#167156 = EDGE_CURVE('',#167149,#167157,#167159,.T.); +#167157 = VERTEX_POINT('',#167158); +#167158 = CARTESIAN_POINT('',(121.720373,-101.552919,1.585)); +#167159 = CIRCLE('',#167160,0.18686440374); +#167160 = AXIS2_PLACEMENT_3D('',#167161,#167162,#167163); +#167161 = CARTESIAN_POINT('',(121.672837,-101.733636,1.585)); +#167162 = DIRECTION('',(0.,0.,1.)); +#167163 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#167164 = ORIENTED_EDGE('',*,*,#167165,.T.); +#167165 = EDGE_CURVE('',#167157,#167166,#167168,.T.); +#167166 = VERTEX_POINT('',#167167); +#167167 = CARTESIAN_POINT('',(121.517688,-101.552919,1.585)); +#167168 = LINE('',#167169,#167170); +#167169 = CARTESIAN_POINT('',(121.720373,-101.552919,1.585)); +#167170 = VECTOR('',#167171,1.); +#167171 = DIRECTION('',(-1.,0.,0.)); +#167172 = ORIENTED_EDGE('',*,*,#167173,.T.); +#167173 = EDGE_CURVE('',#167166,#167174,#167176,.T.); +#167174 = VERTEX_POINT('',#167175); +#167175 = CARTESIAN_POINT('',(121.449172,-101.587177,1.585)); +#167176 = LINE('',#167177,#167178); +#167177 = CARTESIAN_POINT('',(121.517688,-101.552919,1.585)); +#167178 = VECTOR('',#167179,1.); +#167179 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#167180 = ORIENTED_EDGE('',*,*,#167181,.T.); +#167181 = EDGE_CURVE('',#167174,#167182,#167184,.T.); +#167182 = VERTEX_POINT('',#167183); +#167183 = CARTESIAN_POINT('',(121.398794,-101.635517,1.585)); +#167184 = LINE('',#167185,#167186); +#167185 = CARTESIAN_POINT('',(121.449172,-101.587177,1.585)); +#167186 = VECTOR('',#167187,1.); +#167187 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#167188 = ORIENTED_EDGE('',*,*,#167189,.T.); +#167189 = EDGE_CURVE('',#167182,#167190,#167192,.T.); +#167190 = VERTEX_POINT('',#167191); +#167191 = CARTESIAN_POINT('',(121.304093,-101.520124,1.585)); +#167192 = CIRCLE('',#167193,7.499996838527E-02); +#167193 = AXIS2_PLACEMENT_3D('',#167194,#167195,#167196); +#167194 = CARTESIAN_POINT('',(121.357126,-101.5731569724,1.585)); +#167195 = DIRECTION('',(0.,0.,-1.)); +#167196 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#167197 = ORIENTED_EDGE('',*,*,#167198,.T.); +#167198 = EDGE_CURVE('',#167190,#167048,#167199,.T.); +#167199 = LINE('',#167200,#167201); +#167200 = CARTESIAN_POINT('',(121.304093,-101.520124,1.585)); +#167201 = VECTOR('',#167202,1.); +#167202 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#167203 = PLANE('',#167204); +#167204 = AXIS2_PLACEMENT_3D('',#167205,#167206,#167207); +#167205 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167206 = DIRECTION('',(0.,0.,1.)); +#167207 = DIRECTION('',(1.,0.,-0.)); +#167208 = SHELL_BASED_SURFACE_MODEL('',(#167209)); +#167209 = OPEN_SHELL('',(#167210)); +#167210 = ADVANCED_FACE('',(#167211),#167396,.T.); +#167211 = FACE_BOUND('',#167212,.F.); +#167212 = EDGE_LOOP('',(#167213,#167224,#167232,#167241,#167249,#167258, + #167266,#167275,#167283,#167291,#167299,#167308,#167316,#167325, + #167333,#167342,#167350,#167358,#167366,#167374,#167382,#167390)); +#167213 = ORIENTED_EDGE('',*,*,#167214,.T.); +#167214 = EDGE_CURVE('',#167215,#167217,#167219,.T.); +#167215 = VERTEX_POINT('',#167216); +#167216 = CARTESIAN_POINT('',(119.558078,-101.460381,1.585)); +#167217 = VERTEX_POINT('',#167218); +#167218 = CARTESIAN_POINT('',(120.017841,-101.463178,1.585)); +#167219 = CIRCLE('',#167220,0.460785175821); +#167220 = AXIS2_PLACEMENT_3D('',#167221,#167222,#167223); +#167221 = CARTESIAN_POINT('',(119.78553010897,-101.8611159702,1.585)); +#167222 = DIRECTION('',(0.,0.,-1.)); +#167223 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#167224 = ORIENTED_EDGE('',*,*,#167225,.T.); +#167225 = EDGE_CURVE('',#167217,#167226,#167228,.T.); +#167226 = VERTEX_POINT('',#167227); +#167227 = CARTESIAN_POINT('',(120.086152,-101.531489,1.585)); +#167228 = LINE('',#167229,#167230); +#167229 = CARTESIAN_POINT('',(120.017841,-101.463178,1.585)); +#167230 = VECTOR('',#167231,1.); +#167231 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#167232 = ORIENTED_EDGE('',*,*,#167233,.T.); +#167233 = EDGE_CURVE('',#167226,#167234,#167236,.T.); +#167234 = VERTEX_POINT('',#167235); +#167235 = CARTESIAN_POINT('',(119.970759,-101.62619,1.585)); +#167236 = CIRCLE('',#167237,7.500003178655E-02); +#167237 = AXIS2_PLACEMENT_3D('',#167238,#167239,#167240); +#167238 = CARTESIAN_POINT('',(120.02379156212,-101.5731565,1.585)); +#167239 = DIRECTION('',(0.,0.,-1.)); +#167240 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#167241 = ORIENTED_EDGE('',*,*,#167242,.T.); +#167242 = EDGE_CURVE('',#167234,#167243,#167245,.T.); +#167243 = VERTEX_POINT('',#167244); +#167244 = CARTESIAN_POINT('',(119.935659,-101.59109,1.585)); +#167245 = LINE('',#167246,#167247); +#167246 = CARTESIAN_POINT('',(119.970759,-101.62619,1.585)); +#167247 = VECTOR('',#167248,1.); +#167248 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#167249 = ORIENTED_EDGE('',*,*,#167250,.T.); +#167250 = EDGE_CURVE('',#167243,#167251,#167253,.T.); +#167251 = VERTEX_POINT('',#167252); +#167252 = CARTESIAN_POINT('',(119.635735,-101.59109,1.585)); +#167253 = CIRCLE('',#167254,0.299308637371); +#167254 = AXIS2_PLACEMENT_3D('',#167255,#167256,#167257); +#167255 = CARTESIAN_POINT('',(119.785697,-101.850121,1.585)); +#167256 = DIRECTION('',(0.,0.,1.)); +#167257 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#167258 = ORIENTED_EDGE('',*,*,#167259,.T.); +#167259 = EDGE_CURVE('',#167251,#167260,#167262,.T.); +#167260 = VERTEX_POINT('',#167261); +#167261 = CARTESIAN_POINT('',(119.561622,-101.665203,1.585)); +#167262 = LINE('',#167263,#167264); +#167263 = CARTESIAN_POINT('',(119.635735,-101.59109,1.585)); +#167264 = VECTOR('',#167265,1.); +#167265 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#167266 = ORIENTED_EDGE('',*,*,#167267,.T.); +#167267 = EDGE_CURVE('',#167260,#167268,#167270,.T.); +#167268 = VERTEX_POINT('',#167269); +#167269 = CARTESIAN_POINT('',(119.479745,-102.040113,1.585)); +#167270 = CIRCLE('',#167271,0.611712714363); +#167271 = AXIS2_PLACEMENT_3D('',#167272,#167273,#167274); +#167272 = CARTESIAN_POINT('',(120.08815027521,-101.9765876822,1.585)); +#167273 = DIRECTION('',(0.,0.,1.)); +#167274 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#167275 = ORIENTED_EDGE('',*,*,#167276,.T.); +#167276 = EDGE_CURVE('',#167268,#167277,#167279,.T.); +#167277 = VERTEX_POINT('',#167278); +#167278 = CARTESIAN_POINT('',(119.523128,-102.213647,1.585)); +#167279 = LINE('',#167280,#167281); +#167280 = CARTESIAN_POINT('',(119.479745,-102.040113,1.585)); +#167281 = VECTOR('',#167282,1.); +#167282 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#167283 = ORIENTED_EDGE('',*,*,#167284,.T.); +#167284 = EDGE_CURVE('',#167277,#167285,#167287,.T.); +#167285 = VERTEX_POINT('',#167286); +#167286 = CARTESIAN_POINT('',(119.561622,-102.290634,1.585)); +#167287 = LINE('',#167288,#167289); +#167288 = CARTESIAN_POINT('',(119.523128,-102.213647,1.585)); +#167289 = VECTOR('',#167290,1.); +#167290 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#167291 = ORIENTED_EDGE('',*,*,#167292,.T.); +#167292 = EDGE_CURVE('',#167285,#167293,#167295,.T.); +#167293 = VERTEX_POINT('',#167294); +#167294 = CARTESIAN_POINT('',(119.635735,-102.364748,1.585)); +#167295 = LINE('',#167296,#167297); +#167296 = CARTESIAN_POINT('',(119.561622,-102.290634,1.585)); +#167297 = VECTOR('',#167298,1.); +#167298 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#167299 = ORIENTED_EDGE('',*,*,#167300,.T.); +#167300 = EDGE_CURVE('',#167293,#167301,#167303,.T.); +#167301 = VERTEX_POINT('',#167302); +#167302 = CARTESIAN_POINT('',(119.935659,-102.364747,1.585)); +#167303 = CIRCLE('',#167304,0.299305962385); +#167304 = AXIS2_PLACEMENT_3D('',#167305,#167306,#167307); +#167305 = CARTESIAN_POINT('',(119.78569613635,-102.1057195909,1.585)); +#167306 = DIRECTION('',(0.,0.,1.)); +#167307 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#167308 = ORIENTED_EDGE('',*,*,#167309,.T.); +#167309 = EDGE_CURVE('',#167301,#167310,#167312,.T.); +#167310 = VERTEX_POINT('',#167311); +#167311 = CARTESIAN_POINT('',(119.982124,-102.32032,1.585)); +#167312 = LINE('',#167313,#167314); +#167313 = CARTESIAN_POINT('',(119.935659,-102.364747,1.585)); +#167314 = VECTOR('',#167315,1.); +#167315 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#167316 = ORIENTED_EDGE('',*,*,#167317,.T.); +#167317 = EDGE_CURVE('',#167310,#167318,#167320,.T.); +#167318 = VERTEX_POINT('',#167319); +#167319 = CARTESIAN_POINT('',(120.076825,-102.435713,1.585)); +#167320 = CIRCLE('',#167321,7.499993690112E-02); +#167321 = AXIS2_PLACEMENT_3D('',#167322,#167323,#167324); +#167322 = CARTESIAN_POINT('',(120.0237922483,-102.3826798237,1.585)); +#167323 = DIRECTION('',(0.,0.,-1.)); +#167324 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#167325 = ORIENTED_EDGE('',*,*,#167326,.T.); +#167326 = EDGE_CURVE('',#167318,#167327,#167329,.T.); +#167327 = VERTEX_POINT('',#167328); +#167328 = CARTESIAN_POINT('',(120.013315,-102.495457,1.585)); +#167329 = LINE('',#167330,#167331); +#167330 = CARTESIAN_POINT('',(120.076825,-102.435713,1.585)); +#167331 = VECTOR('',#167332,1.); +#167332 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#167333 = ORIENTED_EDGE('',*,*,#167334,.T.); +#167334 = EDGE_CURVE('',#167327,#167335,#167337,.T.); +#167335 = VERTEX_POINT('',#167336); +#167336 = CARTESIAN_POINT('',(119.553553,-102.492661,1.585)); +#167337 = CIRCLE('',#167338,0.461067828848); +#167338 = AXIS2_PLACEMENT_3D('',#167339,#167340,#167341); +#167339 = CARTESIAN_POINT('',(119.78586451268,-102.0943961335,1.585)); +#167340 = DIRECTION('',(-0.,0.,-1.)); +#167341 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#167342 = ORIENTED_EDGE('',*,*,#167343,.T.); +#167343 = EDGE_CURVE('',#167335,#167344,#167346,.T.); +#167344 = VERTEX_POINT('',#167345); +#167345 = CARTESIAN_POINT('',(119.436864,-102.374898,1.585)); +#167346 = LINE('',#167347,#167348); +#167347 = CARTESIAN_POINT('',(119.553553,-102.492661,1.585)); +#167348 = VECTOR('',#167349,1.); +#167349 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#167350 = ORIENTED_EDGE('',*,*,#167351,.T.); +#167351 = EDGE_CURVE('',#167344,#167352,#167354,.T.); +#167352 = VERTEX_POINT('',#167353); +#167353 = CARTESIAN_POINT('',(119.379603,-102.258013,1.585)); +#167354 = LINE('',#167355,#167356); +#167355 = CARTESIAN_POINT('',(119.436864,-102.374898,1.585)); +#167356 = VECTOR('',#167357,1.); +#167357 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#167358 = ORIENTED_EDGE('',*,*,#167359,.T.); +#167359 = EDGE_CURVE('',#167352,#167360,#167362,.T.); +#167360 = VERTEX_POINT('',#167361); +#167361 = CARTESIAN_POINT('',(119.329745,-102.049347,1.585)); +#167362 = LINE('',#167363,#167364); +#167363 = CARTESIAN_POINT('',(119.379603,-102.258013,1.585)); +#167364 = VECTOR('',#167365,1.); +#167365 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#167366 = ORIENTED_EDGE('',*,*,#167367,.T.); +#167367 = EDGE_CURVE('',#167360,#167368,#167370,.T.); +#167368 = VERTEX_POINT('',#167369); +#167369 = CARTESIAN_POINT('',(119.331984,-101.8883,1.585)); +#167370 = LINE('',#167371,#167372); +#167371 = CARTESIAN_POINT('',(119.329745,-102.049347,1.585)); +#167372 = VECTOR('',#167373,1.); +#167373 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#167374 = ORIENTED_EDGE('',*,*,#167375,.T.); +#167375 = EDGE_CURVE('',#167368,#167376,#167378,.T.); +#167376 = VERTEX_POINT('',#167377); +#167377 = CARTESIAN_POINT('',(119.385282,-101.682473,1.585)); +#167378 = LINE('',#167379,#167380); +#167379 = CARTESIAN_POINT('',(119.331984,-101.8883,1.585)); +#167380 = VECTOR('',#167381,1.); +#167381 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#167382 = ORIENTED_EDGE('',*,*,#167383,.T.); +#167383 = EDGE_CURVE('',#167376,#167384,#167386,.T.); +#167384 = VERTEX_POINT('',#167385); +#167385 = CARTESIAN_POINT('',(119.442231,-101.573492,1.585)); +#167386 = LINE('',#167387,#167388); +#167387 = CARTESIAN_POINT('',(119.385282,-101.682473,1.585)); +#167388 = VECTOR('',#167389,1.); +#167389 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#167390 = ORIENTED_EDGE('',*,*,#167391,.T.); +#167391 = EDGE_CURVE('',#167384,#167215,#167392,.T.); +#167392 = LINE('',#167393,#167394); +#167393 = CARTESIAN_POINT('',(119.442231,-101.573492,1.585)); +#167394 = VECTOR('',#167395,1.); +#167395 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#167396 = PLANE('',#167397); +#167397 = AXIS2_PLACEMENT_3D('',#167398,#167399,#167400); +#167398 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167399 = DIRECTION('',(0.,0.,1.)); +#167400 = DIRECTION('',(1.,0.,-0.)); +#167401 = SHELL_BASED_SURFACE_MODEL('',(#167402)); +#167402 = OPEN_SHELL('',(#167403)); +#167403 = ADVANCED_FACE('',(#167404),#167589,.T.); +#167404 = FACE_BOUND('',#167405,.F.); +#167405 = EDGE_LOOP('',(#167406,#167417,#167425,#167434,#167442,#167451, + #167459,#167468,#167476,#167484,#167492,#167501,#167509,#167518, + #167526,#167535,#167543,#167551,#167559,#167567,#167575,#167583)); +#167406 = ORIENTED_EDGE('',*,*,#167407,.T.); +#167407 = EDGE_CURVE('',#167408,#167410,#167412,.T.); +#167408 = VERTEX_POINT('',#167409); +#167409 = CARTESIAN_POINT('',(125.058078,-101.460381,1.585)); +#167410 = VERTEX_POINT('',#167411); +#167411 = CARTESIAN_POINT('',(125.517841,-101.463178,1.585)); +#167412 = CIRCLE('',#167413,0.460785175821); +#167413 = AXIS2_PLACEMENT_3D('',#167414,#167415,#167416); +#167414 = CARTESIAN_POINT('',(125.28553010897,-101.8611159702,1.585)); +#167415 = DIRECTION('',(0.,0.,-1.)); +#167416 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#167417 = ORIENTED_EDGE('',*,*,#167418,.T.); +#167418 = EDGE_CURVE('',#167410,#167419,#167421,.T.); +#167419 = VERTEX_POINT('',#167420); +#167420 = CARTESIAN_POINT('',(125.586152,-101.531489,1.585)); +#167421 = LINE('',#167422,#167423); +#167422 = CARTESIAN_POINT('',(125.517841,-101.463178,1.585)); +#167423 = VECTOR('',#167424,1.); +#167424 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#167425 = ORIENTED_EDGE('',*,*,#167426,.T.); +#167426 = EDGE_CURVE('',#167419,#167427,#167429,.T.); +#167427 = VERTEX_POINT('',#167428); +#167428 = CARTESIAN_POINT('',(125.470759,-101.62619,1.585)); +#167429 = CIRCLE('',#167430,7.500003178655E-02); +#167430 = AXIS2_PLACEMENT_3D('',#167431,#167432,#167433); +#167431 = CARTESIAN_POINT('',(125.52379156212,-101.5731565,1.585)); +#167432 = DIRECTION('',(0.,0.,-1.)); +#167433 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#167434 = ORIENTED_EDGE('',*,*,#167435,.T.); +#167435 = EDGE_CURVE('',#167427,#167436,#167438,.T.); +#167436 = VERTEX_POINT('',#167437); +#167437 = CARTESIAN_POINT('',(125.435659,-101.59109,1.585)); +#167438 = LINE('',#167439,#167440); +#167439 = CARTESIAN_POINT('',(125.470759,-101.62619,1.585)); +#167440 = VECTOR('',#167441,1.); +#167441 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#167442 = ORIENTED_EDGE('',*,*,#167443,.T.); +#167443 = EDGE_CURVE('',#167436,#167444,#167446,.T.); +#167444 = VERTEX_POINT('',#167445); +#167445 = CARTESIAN_POINT('',(125.135735,-101.59109,1.585)); +#167446 = CIRCLE('',#167447,0.299308637371); +#167447 = AXIS2_PLACEMENT_3D('',#167448,#167449,#167450); +#167448 = CARTESIAN_POINT('',(125.285697,-101.850121,1.585)); +#167449 = DIRECTION('',(0.,0.,1.)); +#167450 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#167451 = ORIENTED_EDGE('',*,*,#167452,.T.); +#167452 = EDGE_CURVE('',#167444,#167453,#167455,.T.); +#167453 = VERTEX_POINT('',#167454); +#167454 = CARTESIAN_POINT('',(125.061622,-101.665203,1.585)); +#167455 = LINE('',#167456,#167457); +#167456 = CARTESIAN_POINT('',(125.135735,-101.59109,1.585)); +#167457 = VECTOR('',#167458,1.); +#167458 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#167459 = ORIENTED_EDGE('',*,*,#167460,.T.); +#167460 = EDGE_CURVE('',#167453,#167461,#167463,.T.); +#167461 = VERTEX_POINT('',#167462); +#167462 = CARTESIAN_POINT('',(124.979745,-102.040113,1.585)); +#167463 = CIRCLE('',#167464,0.611712714363); +#167464 = AXIS2_PLACEMENT_3D('',#167465,#167466,#167467); +#167465 = CARTESIAN_POINT('',(125.58815027521,-101.9765876822,1.585)); +#167466 = DIRECTION('',(0.,0.,1.)); +#167467 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#167468 = ORIENTED_EDGE('',*,*,#167469,.T.); +#167469 = EDGE_CURVE('',#167461,#167470,#167472,.T.); +#167470 = VERTEX_POINT('',#167471); +#167471 = CARTESIAN_POINT('',(125.023128,-102.213647,1.585)); +#167472 = LINE('',#167473,#167474); +#167473 = CARTESIAN_POINT('',(124.979745,-102.040113,1.585)); +#167474 = VECTOR('',#167475,1.); +#167475 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#167476 = ORIENTED_EDGE('',*,*,#167477,.T.); +#167477 = EDGE_CURVE('',#167470,#167478,#167480,.T.); +#167478 = VERTEX_POINT('',#167479); +#167479 = CARTESIAN_POINT('',(125.061622,-102.290634,1.585)); +#167480 = LINE('',#167481,#167482); +#167481 = CARTESIAN_POINT('',(125.023128,-102.213647,1.585)); +#167482 = VECTOR('',#167483,1.); +#167483 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#167484 = ORIENTED_EDGE('',*,*,#167485,.T.); +#167485 = EDGE_CURVE('',#167478,#167486,#167488,.T.); +#167486 = VERTEX_POINT('',#167487); +#167487 = CARTESIAN_POINT('',(125.135735,-102.364748,1.585)); +#167488 = LINE('',#167489,#167490); +#167489 = CARTESIAN_POINT('',(125.061622,-102.290634,1.585)); +#167490 = VECTOR('',#167491,1.); +#167491 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#167492 = ORIENTED_EDGE('',*,*,#167493,.T.); +#167493 = EDGE_CURVE('',#167486,#167494,#167496,.T.); +#167494 = VERTEX_POINT('',#167495); +#167495 = CARTESIAN_POINT('',(125.435659,-102.364747,1.585)); +#167496 = CIRCLE('',#167497,0.299305962385); +#167497 = AXIS2_PLACEMENT_3D('',#167498,#167499,#167500); +#167498 = CARTESIAN_POINT('',(125.28569613635,-102.1057195909,1.585)); +#167499 = DIRECTION('',(0.,0.,1.)); +#167500 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#167501 = ORIENTED_EDGE('',*,*,#167502,.T.); +#167502 = EDGE_CURVE('',#167494,#167503,#167505,.T.); +#167503 = VERTEX_POINT('',#167504); +#167504 = CARTESIAN_POINT('',(125.482124,-102.32032,1.585)); +#167505 = LINE('',#167506,#167507); +#167506 = CARTESIAN_POINT('',(125.435659,-102.364747,1.585)); +#167507 = VECTOR('',#167508,1.); +#167508 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#167509 = ORIENTED_EDGE('',*,*,#167510,.T.); +#167510 = EDGE_CURVE('',#167503,#167511,#167513,.T.); +#167511 = VERTEX_POINT('',#167512); +#167512 = CARTESIAN_POINT('',(125.576825,-102.435713,1.585)); +#167513 = CIRCLE('',#167514,7.499993690112E-02); +#167514 = AXIS2_PLACEMENT_3D('',#167515,#167516,#167517); +#167515 = CARTESIAN_POINT('',(125.5237922483,-102.3826798237,1.585)); +#167516 = DIRECTION('',(0.,0.,-1.)); +#167517 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#167518 = ORIENTED_EDGE('',*,*,#167519,.T.); +#167519 = EDGE_CURVE('',#167511,#167520,#167522,.T.); +#167520 = VERTEX_POINT('',#167521); +#167521 = CARTESIAN_POINT('',(125.513315,-102.495457,1.585)); +#167522 = LINE('',#167523,#167524); +#167523 = CARTESIAN_POINT('',(125.576825,-102.435713,1.585)); +#167524 = VECTOR('',#167525,1.); +#167525 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#167526 = ORIENTED_EDGE('',*,*,#167527,.T.); +#167527 = EDGE_CURVE('',#167520,#167528,#167530,.T.); +#167528 = VERTEX_POINT('',#167529); +#167529 = CARTESIAN_POINT('',(125.053553,-102.492661,1.585)); +#167530 = CIRCLE('',#167531,0.461067828848); +#167531 = AXIS2_PLACEMENT_3D('',#167532,#167533,#167534); +#167532 = CARTESIAN_POINT('',(125.28586451268,-102.0943961335,1.585)); +#167533 = DIRECTION('',(-0.,0.,-1.)); +#167534 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#167535 = ORIENTED_EDGE('',*,*,#167536,.T.); +#167536 = EDGE_CURVE('',#167528,#167537,#167539,.T.); +#167537 = VERTEX_POINT('',#167538); +#167538 = CARTESIAN_POINT('',(124.936864,-102.374898,1.585)); +#167539 = LINE('',#167540,#167541); +#167540 = CARTESIAN_POINT('',(125.053553,-102.492661,1.585)); +#167541 = VECTOR('',#167542,1.); +#167542 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#167543 = ORIENTED_EDGE('',*,*,#167544,.T.); +#167544 = EDGE_CURVE('',#167537,#167545,#167547,.T.); +#167545 = VERTEX_POINT('',#167546); +#167546 = CARTESIAN_POINT('',(124.879603,-102.258013,1.585)); +#167547 = LINE('',#167548,#167549); +#167548 = CARTESIAN_POINT('',(124.936864,-102.374898,1.585)); +#167549 = VECTOR('',#167550,1.); +#167550 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#167551 = ORIENTED_EDGE('',*,*,#167552,.T.); +#167552 = EDGE_CURVE('',#167545,#167553,#167555,.T.); +#167553 = VERTEX_POINT('',#167554); +#167554 = CARTESIAN_POINT('',(124.829745,-102.049347,1.585)); +#167555 = LINE('',#167556,#167557); +#167556 = CARTESIAN_POINT('',(124.879603,-102.258013,1.585)); +#167557 = VECTOR('',#167558,1.); +#167558 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#167559 = ORIENTED_EDGE('',*,*,#167560,.T.); +#167560 = EDGE_CURVE('',#167553,#167561,#167563,.T.); +#167561 = VERTEX_POINT('',#167562); +#167562 = CARTESIAN_POINT('',(124.831984,-101.8883,1.585)); +#167563 = LINE('',#167564,#167565); +#167564 = CARTESIAN_POINT('',(124.829745,-102.049347,1.585)); +#167565 = VECTOR('',#167566,1.); +#167566 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#167567 = ORIENTED_EDGE('',*,*,#167568,.T.); +#167568 = EDGE_CURVE('',#167561,#167569,#167571,.T.); +#167569 = VERTEX_POINT('',#167570); +#167570 = CARTESIAN_POINT('',(124.885282,-101.682473,1.585)); +#167571 = LINE('',#167572,#167573); +#167572 = CARTESIAN_POINT('',(124.831984,-101.8883,1.585)); +#167573 = VECTOR('',#167574,1.); +#167574 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#167575 = ORIENTED_EDGE('',*,*,#167576,.T.); +#167576 = EDGE_CURVE('',#167569,#167577,#167579,.T.); +#167577 = VERTEX_POINT('',#167578); +#167578 = CARTESIAN_POINT('',(124.942231,-101.573492,1.585)); +#167579 = LINE('',#167580,#167581); +#167580 = CARTESIAN_POINT('',(124.885282,-101.682473,1.585)); +#167581 = VECTOR('',#167582,1.); +#167582 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#167583 = ORIENTED_EDGE('',*,*,#167584,.T.); +#167584 = EDGE_CURVE('',#167577,#167408,#167585,.T.); +#167585 = LINE('',#167586,#167587); +#167586 = CARTESIAN_POINT('',(124.942231,-101.573492,1.585)); +#167587 = VECTOR('',#167588,1.); +#167588 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#167589 = PLANE('',#167590); +#167590 = AXIS2_PLACEMENT_3D('',#167591,#167592,#167593); +#167591 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167592 = DIRECTION('',(0.,0.,1.)); +#167593 = DIRECTION('',(1.,0.,-0.)); +#167594 = SHELL_BASED_SURFACE_MODEL('',(#167595)); +#167595 = OPEN_SHELL('',(#167596)); +#167596 = ADVANCED_FACE('',(#167597),#167783,.T.); +#167597 = FACE_BOUND('',#167598,.F.); +#167598 = EDGE_LOOP('',(#167599,#167610,#167618,#167627,#167635,#167643, + #167652,#167660,#167669,#167677,#167685,#167693,#167702,#167710, + #167719,#167727,#167736,#167744,#167752,#167760,#167769,#167777)); +#167599 = ORIENTED_EDGE('',*,*,#167600,.T.); +#167600 = EDGE_CURVE('',#167601,#167603,#167605,.T.); +#167601 = VERTEX_POINT('',#167602); +#167602 = CARTESIAN_POINT('',(120.342494,-101.551478,1.585)); +#167603 = VERTEX_POINT('',#167604); +#167604 = CARTESIAN_POINT('',(120.357126,-101.402919,1.585)); +#167605 = CIRCLE('',#167606,7.500006711465E-02); +#167606 = AXIS2_PLACEMENT_3D('',#167607,#167608,#167609); +#167607 = CARTESIAN_POINT('',(120.35712593288,-101.4779190671,1.585)); +#167608 = DIRECTION('',(0.,0.,-1.)); +#167609 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#167610 = ORIENTED_EDGE('',*,*,#167611,.T.); +#167611 = EDGE_CURVE('',#167603,#167612,#167614,.T.); +#167612 = VERTEX_POINT('',#167613); +#167613 = CARTESIAN_POINT('',(120.983911,-101.403681,1.585)); +#167614 = LINE('',#167615,#167616); +#167615 = CARTESIAN_POINT('',(120.357126,-101.402919,1.585)); +#167616 = VECTOR('',#167617,1.); +#167617 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#167618 = ORIENTED_EDGE('',*,*,#167619,.T.); +#167619 = EDGE_CURVE('',#167612,#167620,#167622,.T.); +#167620 = VERTEX_POINT('',#167621); +#167621 = CARTESIAN_POINT('',(121.049732,-101.492551,1.585)); +#167622 = CIRCLE('',#167623,7.447391611625E-02); +#167623 = AXIS2_PLACEMENT_3D('',#167624,#167625,#167626); +#167624 = CARTESIAN_POINT('',(120.97673192664,-101.4778080874,1.585)); +#167625 = DIRECTION('',(0.,0.,-1.)); +#167626 = DIRECTION('',(9.639715124795E-02,0.995342950561,0.)); +#167627 = ORIENTED_EDGE('',*,*,#167628,.T.); +#167628 = EDGE_CURVE('',#167620,#167629,#167631,.T.); +#167629 = VERTEX_POINT('',#167630); +#167630 = CARTESIAN_POINT('',(121.032616,-101.527307,1.585)); +#167631 = LINE('',#167632,#167633); +#167632 = CARTESIAN_POINT('',(121.049732,-101.492551,1.585)); +#167633 = VECTOR('',#167634,1.); +#167634 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#167635 = ORIENTED_EDGE('',*,*,#167636,.T.); +#167636 = EDGE_CURVE('',#167629,#167637,#167639,.T.); +#167637 = VERTEX_POINT('',#167638); +#167638 = CARTESIAN_POINT('',(120.80572,-101.786616,1.585)); +#167639 = LINE('',#167640,#167641); +#167640 = CARTESIAN_POINT('',(121.032616,-101.527307,1.585)); +#167641 = VECTOR('',#167642,1.); +#167642 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#167643 = ORIENTED_EDGE('',*,*,#167644,.T.); +#167644 = EDGE_CURVE('',#167637,#167645,#167647,.T.); +#167645 = VERTEX_POINT('',#167646); +#167646 = CARTESIAN_POINT('',(121.049732,-102.034715,1.585)); +#167647 = CIRCLE('',#167648,0.348520834816); +#167648 = AXIS2_PLACEMENT_3D('',#167649,#167650,#167651); +#167649 = CARTESIAN_POINT('',(120.7124266174,-102.1224181993,1.585)); +#167650 = DIRECTION('',(0.,0.,-1.)); +#167651 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#167652 = ORIENTED_EDGE('',*,*,#167653,.T.); +#167653 = EDGE_CURVE('',#167645,#167654,#167656,.T.); +#167654 = VERTEX_POINT('',#167655); +#167655 = CARTESIAN_POINT('',(121.04851,-102.307252,1.585)); +#167656 = LINE('',#167657,#167658); +#167657 = CARTESIAN_POINT('',(121.049732,-102.034715,1.585)); +#167658 = VECTOR('',#167659,1.); +#167659 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#167660 = ORIENTED_EDGE('',*,*,#167661,.T.); +#167661 = EDGE_CURVE('',#167654,#167662,#167664,.T.); +#167662 = VERTEX_POINT('',#167663); +#167663 = CARTESIAN_POINT('',(120.800329,-102.551478,1.585)); +#167664 = CIRCLE('',#167665,0.348635327447); +#167665 = AXIS2_PLACEMENT_3D('',#167666,#167667,#167668); +#167666 = CARTESIAN_POINT('',(120.71255748129,-102.2140720841,1.585)); +#167667 = DIRECTION('',(0.,0.,-1.)); +#167668 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#167669 = ORIENTED_EDGE('',*,*,#167670,.T.); +#167670 = EDGE_CURVE('',#167662,#167671,#167673,.T.); +#167671 = VERTEX_POINT('',#167672); +#167672 = CARTESIAN_POINT('',(120.480173,-102.550256,1.585)); +#167673 = LINE('',#167674,#167675); +#167674 = CARTESIAN_POINT('',(120.800329,-102.551478,1.585)); +#167675 = VECTOR('',#167676,1.); +#167676 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#167677 = ORIENTED_EDGE('',*,*,#167678,.T.); +#167678 = EDGE_CURVE('',#167671,#167679,#167681,.T.); +#167679 = VERTEX_POINT('',#167680); +#167680 = CARTESIAN_POINT('',(120.35746,-102.48805,1.585)); +#167681 = LINE('',#167682,#167683); +#167682 = CARTESIAN_POINT('',(120.480173,-102.550256,1.585)); +#167683 = VECTOR('',#167684,1.); +#167684 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#167685 = ORIENTED_EDGE('',*,*,#167686,.T.); +#167686 = EDGE_CURVE('',#167679,#167687,#167689,.T.); +#167687 = VERTEX_POINT('',#167688); +#167688 = CARTESIAN_POINT('',(120.294765,-102.424347,1.585)); +#167689 = LINE('',#167690,#167691); +#167690 = CARTESIAN_POINT('',(120.35746,-102.48805,1.585)); +#167691 = VECTOR('',#167692,1.); +#167692 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#167693 = ORIENTED_EDGE('',*,*,#167694,.T.); +#167694 = EDGE_CURVE('',#167687,#167695,#167697,.T.); +#167695 = VERTEX_POINT('',#167696); +#167696 = CARTESIAN_POINT('',(120.41016,-102.329648,1.585)); +#167697 = CIRCLE('',#167698,7.50001266804E-02); +#167698 = AXIS2_PLACEMENT_3D('',#167699,#167700,#167701); +#167699 = CARTESIAN_POINT('',(120.35712605199,-102.3826802483,1.585)); +#167700 = DIRECTION('',(0.,0.,-1.)); +#167701 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#167702 = ORIENTED_EDGE('',*,*,#167703,.T.); +#167703 = EDGE_CURVE('',#167695,#167704,#167706,.T.); +#167704 = VERTEX_POINT('',#167705); +#167705 = CARTESIAN_POINT('',(120.449172,-102.368661,1.585)); +#167706 = LINE('',#167707,#167708); +#167707 = CARTESIAN_POINT('',(120.41016,-102.329648,1.585)); +#167708 = VECTOR('',#167709,1.); +#167709 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#167710 = ORIENTED_EDGE('',*,*,#167711,.T.); +#167711 = EDGE_CURVE('',#167704,#167712,#167714,.T.); +#167712 = VERTEX_POINT('',#167713); +#167713 = CARTESIAN_POINT('',(120.836507,-102.368661,1.585)); +#167714 = CIRCLE('',#167715,0.358502380266); +#167715 = AXIS2_PLACEMENT_3D('',#167716,#167717,#167718); +#167716 = CARTESIAN_POINT('',(120.6428395,-102.066971,1.585)); +#167717 = DIRECTION('',(0.,0.,1.)); +#167718 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#167719 = ORIENTED_EDGE('',*,*,#167720,.T.); +#167720 = EDGE_CURVE('',#167712,#167721,#167723,.T.); +#167721 = VERTEX_POINT('',#167722); +#167722 = CARTESIAN_POINT('',(120.866914,-102.338253,1.585)); +#167723 = LINE('',#167724,#167725); +#167724 = CARTESIAN_POINT('',(120.836507,-102.368661,1.585)); +#167725 = VECTOR('',#167726,1.); +#167726 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#167727 = ORIENTED_EDGE('',*,*,#167728,.T.); +#167728 = EDGE_CURVE('',#167721,#167729,#167731,.T.); +#167729 = VERTEX_POINT('',#167730); +#167730 = CARTESIAN_POINT('',(120.866915,-101.998536,1.585)); +#167731 = CIRCLE('',#167732,0.305616146029); +#167732 = AXIS2_PLACEMENT_3D('',#167733,#167734,#167735); +#167733 = CARTESIAN_POINT('',(120.61284892049,-102.1683937521,1.585)); +#167734 = DIRECTION('',(0.,-0.,1.)); +#167735 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#167736 = ORIENTED_EDGE('',*,*,#167737,.T.); +#167737 = EDGE_CURVE('',#167729,#167738,#167740,.T.); +#167738 = VERTEX_POINT('',#167739); +#167739 = CARTESIAN_POINT('',(120.836508,-101.968129,1.585)); +#167740 = LINE('',#167741,#167742); +#167741 = CARTESIAN_POINT('',(120.866915,-101.998536,1.585)); +#167742 = VECTOR('',#167743,1.); +#167743 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#167744 = ORIENTED_EDGE('',*,*,#167745,.T.); +#167745 = EDGE_CURVE('',#167738,#167746,#167748,.T.); +#167746 = VERTEX_POINT('',#167747); +#167747 = CARTESIAN_POINT('',(120.767992,-101.933871,1.585)); +#167748 = LINE('',#167749,#167750); +#167749 = CARTESIAN_POINT('',(120.836508,-101.968129,1.585)); +#167750 = VECTOR('',#167751,1.); +#167751 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#167752 = ORIENTED_EDGE('',*,*,#167753,.T.); +#167753 = EDGE_CURVE('',#167746,#167754,#167756,.T.); +#167754 = VERTEX_POINT('',#167755); +#167755 = CARTESIAN_POINT('',(120.628208,-101.93243,1.585)); +#167756 = LINE('',#167757,#167758); +#167757 = CARTESIAN_POINT('',(120.767992,-101.933871,1.585)); +#167758 = VECTOR('',#167759,1.); +#167759 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#167760 = ORIENTED_EDGE('',*,*,#167761,.T.); +#167761 = EDGE_CURVE('',#167754,#167762,#167764,.T.); +#167762 = VERTEX_POINT('',#167763); +#167763 = CARTESIAN_POINT('',(120.586397,-101.809483,1.585)); +#167764 = CIRCLE('',#167765,7.500015628755E-02); +#167765 = AXIS2_PLACEMENT_3D('',#167766,#167767,#167768); +#167766 = CARTESIAN_POINT('',(120.64284028432,-101.8588710461,1.585)); +#167767 = DIRECTION('',(0.,0.,-1.)); +#167768 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#167769 = ORIENTED_EDGE('',*,*,#167770,.T.); +#167770 = EDGE_CURVE('',#167762,#167771,#167773,.T.); +#167771 = VERTEX_POINT('',#167772); +#167772 = CARTESIAN_POINT('',(120.810891,-101.552919,1.585)); +#167773 = LINE('',#167774,#167775); +#167774 = CARTESIAN_POINT('',(120.586397,-101.809483,1.585)); +#167775 = VECTOR('',#167776,1.); +#167776 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#167777 = ORIENTED_EDGE('',*,*,#167778,.T.); +#167778 = EDGE_CURVE('',#167771,#167601,#167779,.T.); +#167779 = LINE('',#167780,#167781); +#167780 = CARTESIAN_POINT('',(120.810891,-101.552919,1.585)); +#167781 = VECTOR('',#167782,1.); +#167782 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#167783 = PLANE('',#167784); +#167784 = AXIS2_PLACEMENT_3D('',#167785,#167786,#167787); +#167785 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167786 = DIRECTION('',(0.,0.,1.)); +#167787 = DIRECTION('',(1.,0.,-0.)); +#167788 = SHELL_BASED_SURFACE_MODEL('',(#167789)); +#167789 = OPEN_SHELL('',(#167790)); +#167790 = ADVANCED_FACE('',(#167791),#167977,.T.); +#167791 = FACE_BOUND('',#167792,.F.); +#167792 = EDGE_LOOP('',(#167793,#167804,#167812,#167821,#167829,#167837, + #167846,#167854,#167863,#167871,#167879,#167887,#167896,#167904, + #167913,#167921,#167930,#167938,#167946,#167954,#167963,#167971)); +#167793 = ORIENTED_EDGE('',*,*,#167794,.T.); +#167794 = EDGE_CURVE('',#167795,#167797,#167799,.T.); +#167795 = VERTEX_POINT('',#167796); +#167796 = CARTESIAN_POINT('',(125.842494,-101.551478,1.585)); +#167797 = VERTEX_POINT('',#167798); +#167798 = CARTESIAN_POINT('',(125.857126,-101.402919,1.585)); +#167799 = CIRCLE('',#167800,7.500006711465E-02); +#167800 = AXIS2_PLACEMENT_3D('',#167801,#167802,#167803); +#167801 = CARTESIAN_POINT('',(125.85712593288,-101.4779190671,1.585)); +#167802 = DIRECTION('',(0.,0.,-1.)); +#167803 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#167804 = ORIENTED_EDGE('',*,*,#167805,.T.); +#167805 = EDGE_CURVE('',#167797,#167806,#167808,.T.); +#167806 = VERTEX_POINT('',#167807); +#167807 = CARTESIAN_POINT('',(126.483911,-101.403681,1.585)); +#167808 = LINE('',#167809,#167810); +#167809 = CARTESIAN_POINT('',(125.857126,-101.402919,1.585)); +#167810 = VECTOR('',#167811,1.); +#167811 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#167812 = ORIENTED_EDGE('',*,*,#167813,.T.); +#167813 = EDGE_CURVE('',#167806,#167814,#167816,.T.); +#167814 = VERTEX_POINT('',#167815); +#167815 = CARTESIAN_POINT('',(126.549732,-101.492551,1.585)); +#167816 = CIRCLE('',#167817,7.447391611625E-02); +#167817 = AXIS2_PLACEMENT_3D('',#167818,#167819,#167820); +#167818 = CARTESIAN_POINT('',(126.47673192664,-101.4778080874,1.585)); +#167819 = DIRECTION('',(0.,0.,-1.)); +#167820 = DIRECTION('',(9.639715124795E-02,0.995342950561,0.)); +#167821 = ORIENTED_EDGE('',*,*,#167822,.T.); +#167822 = EDGE_CURVE('',#167814,#167823,#167825,.T.); +#167823 = VERTEX_POINT('',#167824); +#167824 = CARTESIAN_POINT('',(126.532616,-101.527307,1.585)); +#167825 = LINE('',#167826,#167827); +#167826 = CARTESIAN_POINT('',(126.549732,-101.492551,1.585)); +#167827 = VECTOR('',#167828,1.); +#167828 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#167829 = ORIENTED_EDGE('',*,*,#167830,.T.); +#167830 = EDGE_CURVE('',#167823,#167831,#167833,.T.); +#167831 = VERTEX_POINT('',#167832); +#167832 = CARTESIAN_POINT('',(126.30572,-101.786616,1.585)); +#167833 = LINE('',#167834,#167835); +#167834 = CARTESIAN_POINT('',(126.532616,-101.527307,1.585)); +#167835 = VECTOR('',#167836,1.); +#167836 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#167837 = ORIENTED_EDGE('',*,*,#167838,.T.); +#167838 = EDGE_CURVE('',#167831,#167839,#167841,.T.); +#167839 = VERTEX_POINT('',#167840); +#167840 = CARTESIAN_POINT('',(126.549732,-102.034715,1.585)); +#167841 = CIRCLE('',#167842,0.348520834816); +#167842 = AXIS2_PLACEMENT_3D('',#167843,#167844,#167845); +#167843 = CARTESIAN_POINT('',(126.2124266174,-102.1224181993,1.585)); +#167844 = DIRECTION('',(0.,0.,-1.)); +#167845 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#167846 = ORIENTED_EDGE('',*,*,#167847,.T.); +#167847 = EDGE_CURVE('',#167839,#167848,#167850,.T.); +#167848 = VERTEX_POINT('',#167849); +#167849 = CARTESIAN_POINT('',(126.54851,-102.307252,1.585)); +#167850 = LINE('',#167851,#167852); +#167851 = CARTESIAN_POINT('',(126.549732,-102.034715,1.585)); +#167852 = VECTOR('',#167853,1.); +#167853 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#167854 = ORIENTED_EDGE('',*,*,#167855,.T.); +#167855 = EDGE_CURVE('',#167848,#167856,#167858,.T.); +#167856 = VERTEX_POINT('',#167857); +#167857 = CARTESIAN_POINT('',(126.300329,-102.551478,1.585)); +#167858 = CIRCLE('',#167859,0.348635327447); +#167859 = AXIS2_PLACEMENT_3D('',#167860,#167861,#167862); +#167860 = CARTESIAN_POINT('',(126.21255748129,-102.2140720841,1.585)); +#167861 = DIRECTION('',(0.,0.,-1.)); +#167862 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#167863 = ORIENTED_EDGE('',*,*,#167864,.T.); +#167864 = EDGE_CURVE('',#167856,#167865,#167867,.T.); +#167865 = VERTEX_POINT('',#167866); +#167866 = CARTESIAN_POINT('',(125.980173,-102.550256,1.585)); +#167867 = LINE('',#167868,#167869); +#167868 = CARTESIAN_POINT('',(126.300329,-102.551478,1.585)); +#167869 = VECTOR('',#167870,1.); +#167870 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#167871 = ORIENTED_EDGE('',*,*,#167872,.T.); +#167872 = EDGE_CURVE('',#167865,#167873,#167875,.T.); +#167873 = VERTEX_POINT('',#167874); +#167874 = CARTESIAN_POINT('',(125.85746,-102.48805,1.585)); +#167875 = LINE('',#167876,#167877); +#167876 = CARTESIAN_POINT('',(125.980173,-102.550256,1.585)); +#167877 = VECTOR('',#167878,1.); +#167878 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#167879 = ORIENTED_EDGE('',*,*,#167880,.T.); +#167880 = EDGE_CURVE('',#167873,#167881,#167883,.T.); +#167881 = VERTEX_POINT('',#167882); +#167882 = CARTESIAN_POINT('',(125.794765,-102.424347,1.585)); +#167883 = LINE('',#167884,#167885); +#167884 = CARTESIAN_POINT('',(125.85746,-102.48805,1.585)); +#167885 = VECTOR('',#167886,1.); +#167886 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#167887 = ORIENTED_EDGE('',*,*,#167888,.T.); +#167888 = EDGE_CURVE('',#167881,#167889,#167891,.T.); +#167889 = VERTEX_POINT('',#167890); +#167890 = CARTESIAN_POINT('',(125.91016,-102.329648,1.585)); +#167891 = CIRCLE('',#167892,7.50001266804E-02); +#167892 = AXIS2_PLACEMENT_3D('',#167893,#167894,#167895); +#167893 = CARTESIAN_POINT('',(125.85712605199,-102.3826802483,1.585)); +#167894 = DIRECTION('',(0.,0.,-1.)); +#167895 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#167896 = ORIENTED_EDGE('',*,*,#167897,.T.); +#167897 = EDGE_CURVE('',#167889,#167898,#167900,.T.); +#167898 = VERTEX_POINT('',#167899); +#167899 = CARTESIAN_POINT('',(125.949172,-102.368661,1.585)); +#167900 = LINE('',#167901,#167902); +#167901 = CARTESIAN_POINT('',(125.91016,-102.329648,1.585)); +#167902 = VECTOR('',#167903,1.); +#167903 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#167904 = ORIENTED_EDGE('',*,*,#167905,.T.); +#167905 = EDGE_CURVE('',#167898,#167906,#167908,.T.); +#167906 = VERTEX_POINT('',#167907); +#167907 = CARTESIAN_POINT('',(126.336507,-102.368661,1.585)); +#167908 = CIRCLE('',#167909,0.358502380266); +#167909 = AXIS2_PLACEMENT_3D('',#167910,#167911,#167912); +#167910 = CARTESIAN_POINT('',(126.1428395,-102.066971,1.585)); +#167911 = DIRECTION('',(0.,0.,1.)); +#167912 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#167913 = ORIENTED_EDGE('',*,*,#167914,.T.); +#167914 = EDGE_CURVE('',#167906,#167915,#167917,.T.); +#167915 = VERTEX_POINT('',#167916); +#167916 = CARTESIAN_POINT('',(126.366914,-102.338253,1.585)); +#167917 = LINE('',#167918,#167919); +#167918 = CARTESIAN_POINT('',(126.336507,-102.368661,1.585)); +#167919 = VECTOR('',#167920,1.); +#167920 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#167921 = ORIENTED_EDGE('',*,*,#167922,.T.); +#167922 = EDGE_CURVE('',#167915,#167923,#167925,.T.); +#167923 = VERTEX_POINT('',#167924); +#167924 = CARTESIAN_POINT('',(126.366915,-101.998536,1.585)); +#167925 = CIRCLE('',#167926,0.305616146029); +#167926 = AXIS2_PLACEMENT_3D('',#167927,#167928,#167929); +#167927 = CARTESIAN_POINT('',(126.11284892049,-102.1683937521,1.585)); +#167928 = DIRECTION('',(0.,-0.,1.)); +#167929 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#167930 = ORIENTED_EDGE('',*,*,#167931,.T.); +#167931 = EDGE_CURVE('',#167923,#167932,#167934,.T.); +#167932 = VERTEX_POINT('',#167933); +#167933 = CARTESIAN_POINT('',(126.336508,-101.968129,1.585)); +#167934 = LINE('',#167935,#167936); +#167935 = CARTESIAN_POINT('',(126.366915,-101.998536,1.585)); +#167936 = VECTOR('',#167937,1.); +#167937 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#167938 = ORIENTED_EDGE('',*,*,#167939,.T.); +#167939 = EDGE_CURVE('',#167932,#167940,#167942,.T.); +#167940 = VERTEX_POINT('',#167941); +#167941 = CARTESIAN_POINT('',(126.267992,-101.933871,1.585)); +#167942 = LINE('',#167943,#167944); +#167943 = CARTESIAN_POINT('',(126.336508,-101.968129,1.585)); +#167944 = VECTOR('',#167945,1.); +#167945 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#167946 = ORIENTED_EDGE('',*,*,#167947,.T.); +#167947 = EDGE_CURVE('',#167940,#167948,#167950,.T.); +#167948 = VERTEX_POINT('',#167949); +#167949 = CARTESIAN_POINT('',(126.128208,-101.93243,1.585)); +#167950 = LINE('',#167951,#167952); +#167951 = CARTESIAN_POINT('',(126.267992,-101.933871,1.585)); +#167952 = VECTOR('',#167953,1.); +#167953 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#167954 = ORIENTED_EDGE('',*,*,#167955,.T.); +#167955 = EDGE_CURVE('',#167948,#167956,#167958,.T.); +#167956 = VERTEX_POINT('',#167957); +#167957 = CARTESIAN_POINT('',(126.086397,-101.809483,1.585)); +#167958 = CIRCLE('',#167959,7.500015628755E-02); +#167959 = AXIS2_PLACEMENT_3D('',#167960,#167961,#167962); +#167960 = CARTESIAN_POINT('',(126.14284028432,-101.8588710461,1.585)); +#167961 = DIRECTION('',(0.,0.,-1.)); +#167962 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#167963 = ORIENTED_EDGE('',*,*,#167964,.T.); +#167964 = EDGE_CURVE('',#167956,#167965,#167967,.T.); +#167965 = VERTEX_POINT('',#167966); +#167966 = CARTESIAN_POINT('',(126.310891,-101.552919,1.585)); +#167967 = LINE('',#167968,#167969); +#167968 = CARTESIAN_POINT('',(126.086397,-101.809483,1.585)); +#167969 = VECTOR('',#167970,1.); +#167970 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#167971 = ORIENTED_EDGE('',*,*,#167972,.T.); +#167972 = EDGE_CURVE('',#167965,#167795,#167973,.T.); +#167973 = LINE('',#167974,#167975); +#167974 = CARTESIAN_POINT('',(126.310891,-101.552919,1.585)); +#167975 = VECTOR('',#167976,1.); +#167976 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#167977 = PLANE('',#167978); +#167978 = AXIS2_PLACEMENT_3D('',#167979,#167980,#167981); +#167979 = CARTESIAN_POINT('',(0.,0.,1.585)); +#167980 = DIRECTION('',(0.,0.,1.)); +#167981 = DIRECTION('',(1.,0.,-0.)); +#167982 = SHELL_BASED_SURFACE_MODEL('',(#167983)); +#167983 = OPEN_SHELL('',(#167984)); +#167984 = ADVANCED_FACE('',(#167985),#168171,.T.); +#167985 = FACE_BOUND('',#167986,.F.); +#167986 = EDGE_LOOP('',(#167987,#167998,#168006,#168015,#168023,#168031, + #168040,#168048,#168057,#168065,#168073,#168081,#168090,#168098, + #168107,#168115,#168124,#168132,#168140,#168148,#168157,#168165)); +#167987 = ORIENTED_EDGE('',*,*,#167988,.T.); +#167988 = EDGE_CURVE('',#167989,#167991,#167993,.T.); +#167989 = VERTEX_POINT('',#167990); +#167990 = CARTESIAN_POINT('',(126.794875,-101.551478,1.585)); +#167991 = VERTEX_POINT('',#167992); +#167992 = CARTESIAN_POINT('',(126.809507,-101.402919,1.585)); +#167993 = CIRCLE('',#167994,7.500006711465E-02); +#167994 = AXIS2_PLACEMENT_3D('',#167995,#167996,#167997); +#167995 = CARTESIAN_POINT('',(126.80950693288,-101.4779190671,1.585)); +#167996 = DIRECTION('',(0.,0.,-1.)); +#167997 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#167998 = ORIENTED_EDGE('',*,*,#167999,.T.); +#167999 = EDGE_CURVE('',#167991,#168000,#168002,.T.); +#168000 = VERTEX_POINT('',#168001); +#168001 = CARTESIAN_POINT('',(127.436292,-101.403681,1.585)); +#168002 = LINE('',#168003,#168004); +#168003 = CARTESIAN_POINT('',(126.809507,-101.402919,1.585)); +#168004 = VECTOR('',#168005,1.); +#168005 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#168006 = ORIENTED_EDGE('',*,*,#168007,.T.); +#168007 = EDGE_CURVE('',#168000,#168008,#168010,.T.); +#168008 = VERTEX_POINT('',#168009); +#168009 = CARTESIAN_POINT('',(127.502113,-101.492551,1.585)); +#168010 = CIRCLE('',#168011,7.447391611623E-02); +#168011 = AXIS2_PLACEMENT_3D('',#168012,#168013,#168014); +#168012 = CARTESIAN_POINT('',(127.42911292664,-101.4778080874,1.585)); +#168013 = DIRECTION('',(0.,0.,-1.)); +#168014 = DIRECTION('',(9.639715124761E-02,0.995342950561,0.)); +#168015 = ORIENTED_EDGE('',*,*,#168016,.T.); +#168016 = EDGE_CURVE('',#168008,#168017,#168019,.T.); +#168017 = VERTEX_POINT('',#168018); +#168018 = CARTESIAN_POINT('',(127.484997,-101.527307,1.585)); +#168019 = LINE('',#168020,#168021); +#168020 = CARTESIAN_POINT('',(127.502113,-101.492551,1.585)); +#168021 = VECTOR('',#168022,1.); +#168022 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#168023 = ORIENTED_EDGE('',*,*,#168024,.T.); +#168024 = EDGE_CURVE('',#168017,#168025,#168027,.T.); +#168025 = VERTEX_POINT('',#168026); +#168026 = CARTESIAN_POINT('',(127.258101,-101.786616,1.585)); +#168027 = LINE('',#168028,#168029); +#168028 = CARTESIAN_POINT('',(127.484997,-101.527307,1.585)); +#168029 = VECTOR('',#168030,1.); +#168030 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#168031 = ORIENTED_EDGE('',*,*,#168032,.T.); +#168032 = EDGE_CURVE('',#168025,#168033,#168035,.T.); +#168033 = VERTEX_POINT('',#168034); +#168034 = CARTESIAN_POINT('',(127.502113,-102.034715,1.585)); +#168035 = CIRCLE('',#168036,0.348520834816); +#168036 = AXIS2_PLACEMENT_3D('',#168037,#168038,#168039); +#168037 = CARTESIAN_POINT('',(127.1648076174,-102.1224181993,1.585)); +#168038 = DIRECTION('',(0.,0.,-1.)); +#168039 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#168040 = ORIENTED_EDGE('',*,*,#168041,.T.); +#168041 = EDGE_CURVE('',#168033,#168042,#168044,.T.); +#168042 = VERTEX_POINT('',#168043); +#168043 = CARTESIAN_POINT('',(127.500891,-102.307252,1.585)); +#168044 = LINE('',#168045,#168046); +#168045 = CARTESIAN_POINT('',(127.502113,-102.034715,1.585)); +#168046 = VECTOR('',#168047,1.); +#168047 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#168048 = ORIENTED_EDGE('',*,*,#168049,.T.); +#168049 = EDGE_CURVE('',#168042,#168050,#168052,.T.); +#168050 = VERTEX_POINT('',#168051); +#168051 = CARTESIAN_POINT('',(127.25271,-102.551478,1.585)); +#168052 = CIRCLE('',#168053,0.348635327447); +#168053 = AXIS2_PLACEMENT_3D('',#168054,#168055,#168056); +#168054 = CARTESIAN_POINT('',(127.16493848129,-102.2140720841,1.585)); +#168055 = DIRECTION('',(0.,0.,-1.)); +#168056 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#168057 = ORIENTED_EDGE('',*,*,#168058,.T.); +#168058 = EDGE_CURVE('',#168050,#168059,#168061,.T.); +#168059 = VERTEX_POINT('',#168060); +#168060 = CARTESIAN_POINT('',(126.932554,-102.550256,1.585)); +#168061 = LINE('',#168062,#168063); +#168062 = CARTESIAN_POINT('',(127.25271,-102.551478,1.585)); +#168063 = VECTOR('',#168064,1.); +#168064 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#168065 = ORIENTED_EDGE('',*,*,#168066,.T.); +#168066 = EDGE_CURVE('',#168059,#168067,#168069,.T.); +#168067 = VERTEX_POINT('',#168068); +#168068 = CARTESIAN_POINT('',(126.809841,-102.48805,1.585)); +#168069 = LINE('',#168070,#168071); +#168070 = CARTESIAN_POINT('',(126.932554,-102.550256,1.585)); +#168071 = VECTOR('',#168072,1.); +#168072 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#168073 = ORIENTED_EDGE('',*,*,#168074,.T.); +#168074 = EDGE_CURVE('',#168067,#168075,#168077,.T.); +#168075 = VERTEX_POINT('',#168076); +#168076 = CARTESIAN_POINT('',(126.747146,-102.424347,1.585)); +#168077 = LINE('',#168078,#168079); +#168078 = CARTESIAN_POINT('',(126.809841,-102.48805,1.585)); +#168079 = VECTOR('',#168080,1.); +#168080 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#168081 = ORIENTED_EDGE('',*,*,#168082,.T.); +#168082 = EDGE_CURVE('',#168075,#168083,#168085,.T.); +#168083 = VERTEX_POINT('',#168084); +#168084 = CARTESIAN_POINT('',(126.862541,-102.329648,1.585)); +#168085 = CIRCLE('',#168086,7.500012668039E-02); +#168086 = AXIS2_PLACEMENT_3D('',#168087,#168088,#168089); +#168087 = CARTESIAN_POINT('',(126.80950705199,-102.3826802483,1.585)); +#168088 = DIRECTION('',(0.,0.,-1.)); +#168089 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#168090 = ORIENTED_EDGE('',*,*,#168091,.T.); +#168091 = EDGE_CURVE('',#168083,#168092,#168094,.T.); +#168092 = VERTEX_POINT('',#168093); +#168093 = CARTESIAN_POINT('',(126.901553,-102.368661,1.585)); +#168094 = LINE('',#168095,#168096); +#168095 = CARTESIAN_POINT('',(126.862541,-102.329648,1.585)); +#168096 = VECTOR('',#168097,1.); +#168097 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#168098 = ORIENTED_EDGE('',*,*,#168099,.T.); +#168099 = EDGE_CURVE('',#168092,#168100,#168102,.T.); +#168100 = VERTEX_POINT('',#168101); +#168101 = CARTESIAN_POINT('',(127.288888,-102.368661,1.585)); +#168102 = CIRCLE('',#168103,0.358502380266); +#168103 = AXIS2_PLACEMENT_3D('',#168104,#168105,#168106); +#168104 = CARTESIAN_POINT('',(127.0952205,-102.066971,1.585)); +#168105 = DIRECTION('',(0.,0.,1.)); +#168106 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#168107 = ORIENTED_EDGE('',*,*,#168108,.T.); +#168108 = EDGE_CURVE('',#168100,#168109,#168111,.T.); +#168109 = VERTEX_POINT('',#168110); +#168110 = CARTESIAN_POINT('',(127.319295,-102.338253,1.585)); +#168111 = LINE('',#168112,#168113); +#168112 = CARTESIAN_POINT('',(127.288888,-102.368661,1.585)); +#168113 = VECTOR('',#168114,1.); +#168114 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#168115 = ORIENTED_EDGE('',*,*,#168116,.T.); +#168116 = EDGE_CURVE('',#168109,#168117,#168119,.T.); +#168117 = VERTEX_POINT('',#168118); +#168118 = CARTESIAN_POINT('',(127.319296,-101.998536,1.585)); +#168119 = CIRCLE('',#168120,0.305616146029); +#168120 = AXIS2_PLACEMENT_3D('',#168121,#168122,#168123); +#168121 = CARTESIAN_POINT('',(127.06522992049,-102.1683937521,1.585)); +#168122 = DIRECTION('',(0.,-0.,1.)); +#168123 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#168124 = ORIENTED_EDGE('',*,*,#168125,.T.); +#168125 = EDGE_CURVE('',#168117,#168126,#168128,.T.); +#168126 = VERTEX_POINT('',#168127); +#168127 = CARTESIAN_POINT('',(127.288889,-101.968129,1.585)); +#168128 = LINE('',#168129,#168130); +#168129 = CARTESIAN_POINT('',(127.319296,-101.998536,1.585)); +#168130 = VECTOR('',#168131,1.); +#168131 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#168132 = ORIENTED_EDGE('',*,*,#168133,.T.); +#168133 = EDGE_CURVE('',#168126,#168134,#168136,.T.); +#168134 = VERTEX_POINT('',#168135); +#168135 = CARTESIAN_POINT('',(127.220373,-101.933871,1.585)); +#168136 = LINE('',#168137,#168138); +#168137 = CARTESIAN_POINT('',(127.288889,-101.968129,1.585)); +#168138 = VECTOR('',#168139,1.); +#168139 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#168140 = ORIENTED_EDGE('',*,*,#168141,.T.); +#168141 = EDGE_CURVE('',#168134,#168142,#168144,.T.); +#168142 = VERTEX_POINT('',#168143); +#168143 = CARTESIAN_POINT('',(127.080589,-101.93243,1.585)); +#168144 = LINE('',#168145,#168146); +#168145 = CARTESIAN_POINT('',(127.220373,-101.933871,1.585)); +#168146 = VECTOR('',#168147,1.); +#168147 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#168148 = ORIENTED_EDGE('',*,*,#168149,.T.); +#168149 = EDGE_CURVE('',#168142,#168150,#168152,.T.); +#168150 = VERTEX_POINT('',#168151); +#168151 = CARTESIAN_POINT('',(127.038778,-101.809483,1.585)); +#168152 = CIRCLE('',#168153,7.500015628755E-02); +#168153 = AXIS2_PLACEMENT_3D('',#168154,#168155,#168156); +#168154 = CARTESIAN_POINT('',(127.09522128432,-101.8588710461,1.585)); +#168155 = DIRECTION('',(0.,0.,-1.)); +#168156 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#168157 = ORIENTED_EDGE('',*,*,#168158,.T.); +#168158 = EDGE_CURVE('',#168150,#168159,#168161,.T.); +#168159 = VERTEX_POINT('',#168160); +#168160 = CARTESIAN_POINT('',(127.263272,-101.552919,1.585)); +#168161 = LINE('',#168162,#168163); +#168162 = CARTESIAN_POINT('',(127.038778,-101.809483,1.585)); +#168163 = VECTOR('',#168164,1.); +#168164 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#168165 = ORIENTED_EDGE('',*,*,#168166,.T.); +#168166 = EDGE_CURVE('',#168159,#167989,#168167,.T.); +#168167 = LINE('',#168168,#168169); +#168168 = CARTESIAN_POINT('',(127.263272,-101.552919,1.585)); +#168169 = VECTOR('',#168170,1.); +#168170 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#168171 = PLANE('',#168172); +#168172 = AXIS2_PLACEMENT_3D('',#168173,#168174,#168175); +#168173 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168174 = DIRECTION('',(0.,0.,1.)); +#168175 = DIRECTION('',(1.,0.,-0.)); +#168176 = SHELL_BASED_SURFACE_MODEL('',(#168177)); +#168177 = OPEN_SHELL('',(#168178)); +#168178 = ADVANCED_FACE('',(#168179),#168215,.T.); +#168179 = FACE_BOUND('',#168180,.F.); +#168180 = EDGE_LOOP('',(#168181,#168192,#168200,#168209)); +#168181 = ORIENTED_EDGE('',*,*,#168182,.T.); +#168182 = EDGE_CURVE('',#168183,#168185,#168187,.T.); +#168183 = VERTEX_POINT('',#168184); +#168184 = CARTESIAN_POINT('',(96.629392,-101.8606,1.585)); +#168185 = VERTEX_POINT('',#168186); +#168186 = CARTESIAN_POINT('',(96.629392,-101.7406,1.585)); +#168187 = CIRCLE('',#168188,6.000000000042E-02); +#168188 = AXIS2_PLACEMENT_3D('',#168189,#168190,#168191); +#168189 = CARTESIAN_POINT('',(96.629391774412,-101.8006,1.585)); +#168190 = DIRECTION('',(0.,0.,-1.)); +#168191 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168192 = ORIENTED_EDGE('',*,*,#168193,.T.); +#168193 = EDGE_CURVE('',#168185,#168194,#168196,.T.); +#168194 = VERTEX_POINT('',#168195); +#168195 = CARTESIAN_POINT('',(97.103908,-101.7406,1.585)); +#168196 = LINE('',#168197,#168198); +#168197 = CARTESIAN_POINT('',(96.629392,-101.7406,1.585)); +#168198 = VECTOR('',#168199,1.); +#168199 = DIRECTION('',(1.,0.,0.)); +#168200 = ORIENTED_EDGE('',*,*,#168201,.T.); +#168201 = EDGE_CURVE('',#168194,#168202,#168204,.T.); +#168202 = VERTEX_POINT('',#168203); +#168203 = CARTESIAN_POINT('',(97.103908,-101.8606,1.585)); +#168204 = CIRCLE('',#168205,6.000000000043E-02); +#168205 = AXIS2_PLACEMENT_3D('',#168206,#168207,#168208); +#168206 = CARTESIAN_POINT('',(97.103908225588,-101.8006,1.585)); +#168207 = DIRECTION('',(0.,0.,-1.)); +#168208 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168209 = ORIENTED_EDGE('',*,*,#168210,.T.); +#168210 = EDGE_CURVE('',#168202,#168183,#168211,.T.); +#168211 = LINE('',#168212,#168213); +#168212 = CARTESIAN_POINT('',(97.103908,-101.8606,1.585)); +#168213 = VECTOR('',#168214,1.); +#168214 = DIRECTION('',(-1.,0.,0.)); +#168215 = PLANE('',#168216); +#168216 = AXIS2_PLACEMENT_3D('',#168217,#168218,#168219); +#168217 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168218 = DIRECTION('',(0.,0.,1.)); +#168219 = DIRECTION('',(1.,0.,-0.)); +#168220 = SHELL_BASED_SURFACE_MODEL('',(#168221)); +#168221 = OPEN_SHELL('',(#168222)); +#168222 = ADVANCED_FACE('',(#168223),#168259,.T.); +#168223 = FACE_BOUND('',#168224,.F.); +#168224 = EDGE_LOOP('',(#168225,#168236,#168244,#168253)); +#168225 = ORIENTED_EDGE('',*,*,#168226,.T.); +#168226 = EDGE_CURVE('',#168227,#168229,#168231,.T.); +#168227 = VERTEX_POINT('',#168228); +#168228 = CARTESIAN_POINT('',(100.629392,-101.8606,1.585)); +#168229 = VERTEX_POINT('',#168230); +#168230 = CARTESIAN_POINT('',(100.629392,-101.7406,1.585)); +#168231 = CIRCLE('',#168232,6.000000000042E-02); +#168232 = AXIS2_PLACEMENT_3D('',#168233,#168234,#168235); +#168233 = CARTESIAN_POINT('',(100.62939177441,-101.8006,1.585)); +#168234 = DIRECTION('',(0.,0.,-1.)); +#168235 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168236 = ORIENTED_EDGE('',*,*,#168237,.T.); +#168237 = EDGE_CURVE('',#168229,#168238,#168240,.T.); +#168238 = VERTEX_POINT('',#168239); +#168239 = CARTESIAN_POINT('',(101.103908,-101.7406,1.585)); +#168240 = LINE('',#168241,#168242); +#168241 = CARTESIAN_POINT('',(100.629392,-101.7406,1.585)); +#168242 = VECTOR('',#168243,1.); +#168243 = DIRECTION('',(1.,0.,0.)); +#168244 = ORIENTED_EDGE('',*,*,#168245,.T.); +#168245 = EDGE_CURVE('',#168238,#168246,#168248,.T.); +#168246 = VERTEX_POINT('',#168247); +#168247 = CARTESIAN_POINT('',(101.103908,-101.8606,1.585)); +#168248 = CIRCLE('',#168249,6.000000000043E-02); +#168249 = AXIS2_PLACEMENT_3D('',#168250,#168251,#168252); +#168250 = CARTESIAN_POINT('',(101.10390822558,-101.8006,1.585)); +#168251 = DIRECTION('',(0.,0.,-1.)); +#168252 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168253 = ORIENTED_EDGE('',*,*,#168254,.T.); +#168254 = EDGE_CURVE('',#168246,#168227,#168255,.T.); +#168255 = LINE('',#168256,#168257); +#168256 = CARTESIAN_POINT('',(101.103908,-101.8606,1.585)); +#168257 = VECTOR('',#168258,1.); +#168258 = DIRECTION('',(-1.,0.,0.)); +#168259 = PLANE('',#168260); +#168260 = AXIS2_PLACEMENT_3D('',#168261,#168262,#168263); +#168261 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168262 = DIRECTION('',(0.,0.,1.)); +#168263 = DIRECTION('',(1.,0.,-0.)); +#168264 = SHELL_BASED_SURFACE_MODEL('',(#168265)); +#168265 = OPEN_SHELL('',(#168266)); +#168266 = ADVANCED_FACE('',(#168267),#168303,.T.); +#168267 = FACE_BOUND('',#168268,.F.); +#168268 = EDGE_LOOP('',(#168269,#168280,#168288,#168297)); +#168269 = ORIENTED_EDGE('',*,*,#168270,.T.); +#168270 = EDGE_CURVE('',#168271,#168273,#168275,.T.); +#168271 = VERTEX_POINT('',#168272); +#168272 = CARTESIAN_POINT('',(104.629392,-101.8606,1.585)); +#168273 = VERTEX_POINT('',#168274); +#168274 = CARTESIAN_POINT('',(104.629392,-101.7406,1.585)); +#168275 = CIRCLE('',#168276,6.000000000042E-02); +#168276 = AXIS2_PLACEMENT_3D('',#168277,#168278,#168279); +#168277 = CARTESIAN_POINT('',(104.62939177441,-101.8006,1.585)); +#168278 = DIRECTION('',(0.,0.,-1.)); +#168279 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168280 = ORIENTED_EDGE('',*,*,#168281,.T.); +#168281 = EDGE_CURVE('',#168273,#168282,#168284,.T.); +#168282 = VERTEX_POINT('',#168283); +#168283 = CARTESIAN_POINT('',(105.103908,-101.7406,1.585)); +#168284 = LINE('',#168285,#168286); +#168285 = CARTESIAN_POINT('',(104.629392,-101.7406,1.585)); +#168286 = VECTOR('',#168287,1.); +#168287 = DIRECTION('',(1.,0.,0.)); +#168288 = ORIENTED_EDGE('',*,*,#168289,.T.); +#168289 = EDGE_CURVE('',#168282,#168290,#168292,.T.); +#168290 = VERTEX_POINT('',#168291); +#168291 = CARTESIAN_POINT('',(105.103908,-101.8606,1.585)); +#168292 = CIRCLE('',#168293,6.000000000043E-02); +#168293 = AXIS2_PLACEMENT_3D('',#168294,#168295,#168296); +#168294 = CARTESIAN_POINT('',(105.10390822558,-101.8006,1.585)); +#168295 = DIRECTION('',(0.,0.,-1.)); +#168296 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168297 = ORIENTED_EDGE('',*,*,#168298,.T.); +#168298 = EDGE_CURVE('',#168290,#168271,#168299,.T.); +#168299 = LINE('',#168300,#168301); +#168300 = CARTESIAN_POINT('',(105.103908,-101.8606,1.585)); +#168301 = VECTOR('',#168302,1.); +#168302 = DIRECTION('',(-1.,0.,0.)); +#168303 = PLANE('',#168304); +#168304 = AXIS2_PLACEMENT_3D('',#168305,#168306,#168307); +#168305 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168306 = DIRECTION('',(0.,0.,1.)); +#168307 = DIRECTION('',(1.,0.,-0.)); +#168308 = SHELL_BASED_SURFACE_MODEL('',(#168309)); +#168309 = OPEN_SHELL('',(#168310)); +#168310 = ADVANCED_FACE('',(#168311),#168347,.T.); +#168311 = FACE_BOUND('',#168312,.F.); +#168312 = EDGE_LOOP('',(#168313,#168324,#168332,#168341)); +#168313 = ORIENTED_EDGE('',*,*,#168314,.T.); +#168314 = EDGE_CURVE('',#168315,#168317,#168319,.T.); +#168315 = VERTEX_POINT('',#168316); +#168316 = CARTESIAN_POINT('',(108.129392,-101.8606,1.585)); +#168317 = VERTEX_POINT('',#168318); +#168318 = CARTESIAN_POINT('',(108.129392,-101.7406,1.585)); +#168319 = CIRCLE('',#168320,6.000000000042E-02); +#168320 = AXIS2_PLACEMENT_3D('',#168321,#168322,#168323); +#168321 = CARTESIAN_POINT('',(108.12939177441,-101.8006,1.585)); +#168322 = DIRECTION('',(0.,0.,-1.)); +#168323 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168324 = ORIENTED_EDGE('',*,*,#168325,.T.); +#168325 = EDGE_CURVE('',#168317,#168326,#168328,.T.); +#168326 = VERTEX_POINT('',#168327); +#168327 = CARTESIAN_POINT('',(108.603908,-101.7406,1.585)); +#168328 = LINE('',#168329,#168330); +#168329 = CARTESIAN_POINT('',(108.129392,-101.7406,1.585)); +#168330 = VECTOR('',#168331,1.); +#168331 = DIRECTION('',(1.,0.,0.)); +#168332 = ORIENTED_EDGE('',*,*,#168333,.T.); +#168333 = EDGE_CURVE('',#168326,#168334,#168336,.T.); +#168334 = VERTEX_POINT('',#168335); +#168335 = CARTESIAN_POINT('',(108.603908,-101.8606,1.585)); +#168336 = CIRCLE('',#168337,6.000000000043E-02); +#168337 = AXIS2_PLACEMENT_3D('',#168338,#168339,#168340); +#168338 = CARTESIAN_POINT('',(108.60390822558,-101.8006,1.585)); +#168339 = DIRECTION('',(0.,0.,-1.)); +#168340 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168341 = ORIENTED_EDGE('',*,*,#168342,.T.); +#168342 = EDGE_CURVE('',#168334,#168315,#168343,.T.); +#168343 = LINE('',#168344,#168345); +#168344 = CARTESIAN_POINT('',(108.603908,-101.8606,1.585)); +#168345 = VECTOR('',#168346,1.); +#168346 = DIRECTION('',(-1.,0.,0.)); +#168347 = PLANE('',#168348); +#168348 = AXIS2_PLACEMENT_3D('',#168349,#168350,#168351); +#168349 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168350 = DIRECTION('',(0.,0.,1.)); +#168351 = DIRECTION('',(1.,0.,-0.)); +#168352 = SHELL_BASED_SURFACE_MODEL('',(#168353)); +#168353 = OPEN_SHELL('',(#168354)); +#168354 = ADVANCED_FACE('',(#168355),#168391,.T.); +#168355 = FACE_BOUND('',#168356,.F.); +#168356 = EDGE_LOOP('',(#168357,#168368,#168376,#168385)); +#168357 = ORIENTED_EDGE('',*,*,#168358,.T.); +#168358 = EDGE_CURVE('',#168359,#168361,#168363,.T.); +#168359 = VERTEX_POINT('',#168360); +#168360 = CARTESIAN_POINT('',(112.129392,-101.8606,1.585)); +#168361 = VERTEX_POINT('',#168362); +#168362 = CARTESIAN_POINT('',(112.129392,-101.7406,1.585)); +#168363 = CIRCLE('',#168364,6.000000000042E-02); +#168364 = AXIS2_PLACEMENT_3D('',#168365,#168366,#168367); +#168365 = CARTESIAN_POINT('',(112.12939177441,-101.8006,1.585)); +#168366 = DIRECTION('',(0.,0.,-1.)); +#168367 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#168368 = ORIENTED_EDGE('',*,*,#168369,.T.); +#168369 = EDGE_CURVE('',#168361,#168370,#168372,.T.); +#168370 = VERTEX_POINT('',#168371); +#168371 = CARTESIAN_POINT('',(112.603908,-101.7406,1.585)); +#168372 = LINE('',#168373,#168374); +#168373 = CARTESIAN_POINT('',(112.129392,-101.7406,1.585)); +#168374 = VECTOR('',#168375,1.); +#168375 = DIRECTION('',(1.,0.,0.)); +#168376 = ORIENTED_EDGE('',*,*,#168377,.T.); +#168377 = EDGE_CURVE('',#168370,#168378,#168380,.T.); +#168378 = VERTEX_POINT('',#168379); +#168379 = CARTESIAN_POINT('',(112.603908,-101.8606,1.585)); +#168380 = CIRCLE('',#168381,6.000000000043E-02); +#168381 = AXIS2_PLACEMENT_3D('',#168382,#168383,#168384); +#168382 = CARTESIAN_POINT('',(112.60390822558,-101.8006,1.585)); +#168383 = DIRECTION('',(0.,0.,-1.)); +#168384 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#168385 = ORIENTED_EDGE('',*,*,#168386,.T.); +#168386 = EDGE_CURVE('',#168378,#168359,#168387,.T.); +#168387 = LINE('',#168388,#168389); +#168388 = CARTESIAN_POINT('',(112.603908,-101.8606,1.585)); +#168389 = VECTOR('',#168390,1.); +#168390 = DIRECTION('',(-1.,0.,0.)); +#168391 = PLANE('',#168392); +#168392 = AXIS2_PLACEMENT_3D('',#168393,#168394,#168395); +#168393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168394 = DIRECTION('',(0.,0.,1.)); +#168395 = DIRECTION('',(1.,0.,-0.)); +#168396 = SHELL_BASED_SURFACE_MODEL('',(#168397)); +#168397 = OPEN_SHELL('',(#168398)); +#168398 = ADVANCED_FACE('',(#168399),#168435,.T.); +#168399 = FACE_BOUND('',#168400,.F.); +#168400 = EDGE_LOOP('',(#168401,#168412,#168420,#168429)); +#168401 = ORIENTED_EDGE('',*,*,#168402,.T.); +#168402 = EDGE_CURVE('',#168403,#168405,#168407,.T.); +#168403 = VERTEX_POINT('',#168404); +#168404 = CARTESIAN_POINT('',(179.279392,-101.8606,1.585)); +#168405 = VERTEX_POINT('',#168406); +#168406 = CARTESIAN_POINT('',(179.279392,-101.7406,1.585)); +#168407 = CIRCLE('',#168408,6.000000000043E-02); +#168408 = AXIS2_PLACEMENT_3D('',#168409,#168410,#168411); +#168409 = CARTESIAN_POINT('',(179.27939177441,-101.8006,1.585)); +#168410 = DIRECTION('',(0.,0.,-1.)); +#168411 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#168412 = ORIENTED_EDGE('',*,*,#168413,.T.); +#168413 = EDGE_CURVE('',#168405,#168414,#168416,.T.); +#168414 = VERTEX_POINT('',#168415); +#168415 = CARTESIAN_POINT('',(179.753908,-101.7406,1.585)); +#168416 = LINE('',#168417,#168418); +#168417 = CARTESIAN_POINT('',(179.279392,-101.7406,1.585)); +#168418 = VECTOR('',#168419,1.); +#168419 = DIRECTION('',(1.,0.,0.)); +#168420 = ORIENTED_EDGE('',*,*,#168421,.T.); +#168421 = EDGE_CURVE('',#168414,#168422,#168424,.T.); +#168422 = VERTEX_POINT('',#168423); +#168423 = CARTESIAN_POINT('',(179.753908,-101.8606,1.585)); +#168424 = CIRCLE('',#168425,6.000000000042E-02); +#168425 = AXIS2_PLACEMENT_3D('',#168426,#168427,#168428); +#168426 = CARTESIAN_POINT('',(179.75390822558,-101.8006,1.585)); +#168427 = DIRECTION('',(0.,0.,-1.)); +#168428 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#168429 = ORIENTED_EDGE('',*,*,#168430,.T.); +#168430 = EDGE_CURVE('',#168422,#168403,#168431,.T.); +#168431 = LINE('',#168432,#168433); +#168432 = CARTESIAN_POINT('',(179.753908,-101.8606,1.585)); +#168433 = VECTOR('',#168434,1.); +#168434 = DIRECTION('',(-1.,0.,0.)); +#168435 = PLANE('',#168436); +#168436 = AXIS2_PLACEMENT_3D('',#168437,#168438,#168439); +#168437 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168438 = DIRECTION('',(0.,0.,1.)); +#168439 = DIRECTION('',(1.,0.,-0.)); +#168440 = SHELL_BASED_SURFACE_MODEL('',(#168441)); +#168441 = OPEN_SHELL('',(#168442)); +#168442 = ADVANCED_FACE('',(#168443),#168602,.T.); +#168443 = FACE_BOUND('',#168444,.F.); +#168444 = EDGE_LOOP('',(#168445,#168456,#168464,#168472,#168480,#168488, + #168496,#168504,#168513,#168521,#168530,#168538,#168546,#168554, + #168563,#168571,#168579,#168587,#168596)); +#168445 = ORIENTED_EDGE('',*,*,#168446,.T.); +#168446 = EDGE_CURVE('',#168447,#168449,#168451,.T.); +#168447 = VERTEX_POINT('',#168448); +#168448 = CARTESIAN_POINT('',(189.577157,-100.758456,1.585)); +#168449 = VERTEX_POINT('',#168450); +#168450 = CARTESIAN_POINT('',(190.086552,-100.767786,1.585)); +#168451 = CIRCLE('',#168452,0.450326844012); +#168452 = AXIS2_PLACEMENT_3D('',#168453,#168454,#168455); +#168453 = CARTESIAN_POINT('',(189.8250540301,-101.1344098919,1.585)); +#168454 = DIRECTION('',(0.,0.,-1.)); +#168455 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#168456 = ORIENTED_EDGE('',*,*,#168457,.T.); +#168457 = EDGE_CURVE('',#168449,#168458,#168460,.T.); +#168458 = VERTEX_POINT('',#168459); +#168459 = CARTESIAN_POINT('',(190.150005,-100.833316,1.585)); +#168460 = LINE('',#168461,#168462); +#168461 = CARTESIAN_POINT('',(190.086552,-100.767786,1.585)); +#168462 = VECTOR('',#168463,1.); +#168463 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#168464 = ORIENTED_EDGE('',*,*,#168465,.T.); +#168465 = EDGE_CURVE('',#168458,#168466,#168468,.T.); +#168466 = VERTEX_POINT('',#168467); +#168467 = CARTESIAN_POINT('',(190.208066,-100.953763,1.585)); +#168468 = LINE('',#168469,#168470); +#168469 = CARTESIAN_POINT('',(190.150005,-100.833316,1.585)); +#168470 = VECTOR('',#168471,1.); +#168471 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#168472 = ORIENTED_EDGE('',*,*,#168473,.T.); +#168473 = EDGE_CURVE('',#168466,#168474,#168476,.T.); +#168474 = VERTEX_POINT('',#168475); +#168475 = CARTESIAN_POINT('',(190.207307,-101.080095,1.585)); +#168476 = LINE('',#168477,#168478); +#168477 = CARTESIAN_POINT('',(190.208066,-100.953763,1.585)); +#168478 = VECTOR('',#168479,1.); +#168479 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#168480 = ORIENTED_EDGE('',*,*,#168481,.T.); +#168481 = EDGE_CURVE('',#168474,#168482,#168484,.T.); +#168482 = VERTEX_POINT('',#168483); +#168483 = CARTESIAN_POINT('',(190.149249,-101.248158,1.585)); +#168484 = LINE('',#168485,#168486); +#168485 = CARTESIAN_POINT('',(190.207307,-101.080095,1.585)); +#168486 = VECTOR('',#168487,1.); +#168487 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#168488 = ORIENTED_EDGE('',*,*,#168489,.T.); +#168489 = EDGE_CURVE('',#168482,#168490,#168492,.T.); +#168490 = VERTEX_POINT('',#168491); +#168491 = CARTESIAN_POINT('',(189.696526,-101.702919,1.585)); +#168492 = LINE('',#168493,#168494); +#168493 = CARTESIAN_POINT('',(190.149249,-101.248158,1.585)); +#168494 = VECTOR('',#168495,1.); +#168495 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#168496 = ORIENTED_EDGE('',*,*,#168497,.T.); +#168497 = EDGE_CURVE('',#168490,#168498,#168500,.T.); +#168498 = VERTEX_POINT('',#168499); +#168499 = CARTESIAN_POINT('',(190.149139,-101.70436,1.585)); +#168500 = LINE('',#168501,#168502); +#168501 = CARTESIAN_POINT('',(189.696526,-101.702919,1.585)); +#168502 = VECTOR('',#168503,1.); +#168503 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#168504 = ORIENTED_EDGE('',*,*,#168505,.T.); +#168505 = EDGE_CURVE('',#168498,#168506,#168508,.T.); +#168506 = VERTEX_POINT('',#168507); +#168507 = CARTESIAN_POINT('',(190.134507,-101.852919,1.585)); +#168508 = CIRCLE('',#168509,7.500006711464E-02); +#168509 = AXIS2_PLACEMENT_3D('',#168510,#168511,#168512); +#168510 = CARTESIAN_POINT('',(190.13450706711,-101.7779189328,1.585)); +#168511 = DIRECTION('',(0.,0.,-1.)); +#168512 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#168513 = ORIENTED_EDGE('',*,*,#168514,.T.); +#168514 = EDGE_CURVE('',#168506,#168515,#168517,.T.); +#168515 = VERTEX_POINT('',#168516); +#168516 = CARTESIAN_POINT('',(189.500828,-101.851478,1.585)); +#168517 = LINE('',#168518,#168519); +#168518 = CARTESIAN_POINT('',(190.134507,-101.852919,1.585)); +#168519 = VECTOR('',#168520,1.); +#168520 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#168521 = ORIENTED_EDGE('',*,*,#168522,.T.); +#168522 = EDGE_CURVE('',#168515,#168523,#168525,.T.); +#168523 = VERTEX_POINT('',#168524); +#168524 = CARTESIAN_POINT('',(189.462427,-101.724886,1.585)); +#168525 = CIRCLE('',#168526,7.500021013112E-02); +#168526 = AXIS2_PLACEMENT_3D('',#168527,#168528,#168529); +#168527 = CARTESIAN_POINT('',(189.5154603167,-101.7779189976,1.585)); +#168528 = DIRECTION('',(0.,0.,-1.)); +#168529 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#168530 = ORIENTED_EDGE('',*,*,#168531,.T.); +#168531 = EDGE_CURVE('',#168523,#168532,#168534,.T.); +#168532 = VERTEX_POINT('',#168533); +#168533 = CARTESIAN_POINT('',(190.021335,-101.165976,1.585)); +#168534 = LINE('',#168535,#168536); +#168535 = CARTESIAN_POINT('',(189.462427,-101.724886,1.585)); +#168536 = VECTOR('',#168537,1.); +#168537 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#168538 = ORIENTED_EDGE('',*,*,#168539,.T.); +#168539 = EDGE_CURVE('',#168532,#168540,#168542,.T.); +#168540 = VERTEX_POINT('',#168541); +#168541 = CARTESIAN_POINT('',(190.059507,-101.051463,1.585)); +#168542 = LINE('',#168543,#168544); +#168543 = CARTESIAN_POINT('',(190.021335,-101.165976,1.585)); +#168544 = VECTOR('',#168545,1.); +#168545 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#168546 = ORIENTED_EDGE('',*,*,#168547,.T.); +#168547 = EDGE_CURVE('',#168540,#168548,#168550,.T.); +#168548 = VERTEX_POINT('',#168549); +#168549 = CARTESIAN_POINT('',(190.059507,-100.9861,1.585)); +#168550 = LINE('',#168551,#168552); +#168551 = CARTESIAN_POINT('',(190.059507,-101.051463,1.585)); +#168552 = VECTOR('',#168553,1.); +#168553 = DIRECTION('',(0.,1.,0.)); +#168554 = ORIENTED_EDGE('',*,*,#168555,.T.); +#168555 = EDGE_CURVE('',#168548,#168556,#168558,.T.); +#168556 = VERTEX_POINT('',#168557); +#168557 = CARTESIAN_POINT('',(189.926326,-100.852919,1.585)); +#168558 = CIRCLE('',#168559,0.18686440374); +#168559 = AXIS2_PLACEMENT_3D('',#168560,#168561,#168562); +#168560 = CARTESIAN_POINT('',(189.87879,-101.033636,1.585)); +#168561 = DIRECTION('',(0.,0.,1.)); +#168562 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#168563 = ORIENTED_EDGE('',*,*,#168564,.T.); +#168564 = EDGE_CURVE('',#168556,#168565,#168567,.T.); +#168565 = VERTEX_POINT('',#168566); +#168566 = CARTESIAN_POINT('',(189.723641,-100.852919,1.585)); +#168567 = LINE('',#168568,#168569); +#168568 = CARTESIAN_POINT('',(189.926326,-100.852919,1.585)); +#168569 = VECTOR('',#168570,1.); +#168570 = DIRECTION('',(-1.,0.,0.)); +#168571 = ORIENTED_EDGE('',*,*,#168572,.T.); +#168572 = EDGE_CURVE('',#168565,#168573,#168575,.T.); +#168573 = VERTEX_POINT('',#168574); +#168574 = CARTESIAN_POINT('',(189.655125,-100.887177,1.585)); +#168575 = LINE('',#168576,#168577); +#168576 = CARTESIAN_POINT('',(189.723641,-100.852919,1.585)); +#168577 = VECTOR('',#168578,1.); +#168578 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#168579 = ORIENTED_EDGE('',*,*,#168580,.T.); +#168580 = EDGE_CURVE('',#168573,#168581,#168583,.T.); +#168581 = VERTEX_POINT('',#168582); +#168582 = CARTESIAN_POINT('',(189.604747,-100.935517,1.585)); +#168583 = LINE('',#168584,#168585); +#168584 = CARTESIAN_POINT('',(189.655125,-100.887177,1.585)); +#168585 = VECTOR('',#168586,1.); +#168586 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#168587 = ORIENTED_EDGE('',*,*,#168588,.T.); +#168588 = EDGE_CURVE('',#168581,#168589,#168591,.T.); +#168589 = VERTEX_POINT('',#168590); +#168590 = CARTESIAN_POINT('',(189.510046,-100.820124,1.585)); +#168591 = CIRCLE('',#168592,7.499996838528E-02); +#168592 = AXIS2_PLACEMENT_3D('',#168593,#168594,#168595); +#168593 = CARTESIAN_POINT('',(189.563079,-100.8731569724,1.585)); +#168594 = DIRECTION('',(0.,0.,-1.)); +#168595 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#168596 = ORIENTED_EDGE('',*,*,#168597,.T.); +#168597 = EDGE_CURVE('',#168589,#168447,#168598,.T.); +#168598 = LINE('',#168599,#168600); +#168599 = CARTESIAN_POINT('',(189.510046,-100.820124,1.585)); +#168600 = VECTOR('',#168601,1.); +#168601 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#168602 = PLANE('',#168603); +#168603 = AXIS2_PLACEMENT_3D('',#168604,#168605,#168606); +#168604 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168605 = DIRECTION('',(0.,0.,1.)); +#168606 = DIRECTION('',(1.,0.,-0.)); +#168607 = SHELL_BASED_SURFACE_MODEL('',(#168608)); +#168608 = OPEN_SHELL('',(#168609)); +#168609 = ADVANCED_FACE('',(#168610),#168728,.T.); +#168610 = FACE_BOUND('',#168611,.F.); +#168611 = EDGE_LOOP('',(#168612,#168623,#168631,#168639,#168648,#168656, + #168664,#168673,#168681,#168689,#168697,#168706,#168714,#168722)); +#168612 = ORIENTED_EDGE('',*,*,#168613,.T.); +#168613 = EDGE_CURVE('',#168614,#168616,#168618,.T.); +#168614 = VERTEX_POINT('',#168615); +#168615 = CARTESIAN_POINT('',(188.759506,-100.715559,1.585)); +#168616 = VERTEX_POINT('',#168617); +#168617 = CARTESIAN_POINT('',(188.876174,-100.777919,1.585)); +#168618 = CIRCLE('',#168619,7.500000000002E-02); +#168619 = AXIS2_PLACEMENT_3D('',#168620,#168621,#168622); +#168620 = CARTESIAN_POINT('',(188.801174,-100.7779190655,1.585)); +#168621 = DIRECTION('',(0.,0.,-1.)); +#168622 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#168623 = ORIENTED_EDGE('',*,*,#168624,.T.); +#168624 = EDGE_CURVE('',#168616,#168625,#168627,.T.); +#168625 = VERTEX_POINT('',#168626); +#168626 = CARTESIAN_POINT('',(188.876174,-101.311138,1.585)); +#168627 = LINE('',#168628,#168629); +#168628 = CARTESIAN_POINT('',(188.876174,-100.777919,1.585)); +#168629 = VECTOR('',#168630,1.); +#168630 = DIRECTION('',(0.,-1.,0.)); +#168631 = ORIENTED_EDGE('',*,*,#168632,.T.); +#168632 = EDGE_CURVE('',#168625,#168633,#168635,.T.); +#168633 = VERTEX_POINT('',#168634); +#168634 = CARTESIAN_POINT('',(189.140458,-101.048892,1.585)); +#168635 = LINE('',#168636,#168637); +#168636 = CARTESIAN_POINT('',(188.876174,-101.311138,1.585)); +#168637 = VECTOR('',#168638,1.); +#168638 = DIRECTION('',(0.709838408842,0.704364559963,0.)); +#168639 = ORIENTED_EDGE('',*,*,#168640,.T.); +#168640 = EDGE_CURVE('',#168633,#168641,#168643,.T.); +#168641 = VERTEX_POINT('',#168642); +#168642 = CARTESIAN_POINT('',(189.235159,-101.164285,1.585)); +#168643 = CIRCLE('',#168644,7.500003178657E-02); +#168644 = AXIS2_PLACEMENT_3D('',#168645,#168646,#168647); +#168645 = CARTESIAN_POINT('',(189.1821255,-101.1112524378,1.585)); +#168646 = DIRECTION('',(0.,0.,-1.)); +#168647 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#168648 = ORIENTED_EDGE('',*,*,#168649,.T.); +#168649 = EDGE_CURVE('',#168641,#168650,#168652,.T.); +#168650 = VERTEX_POINT('',#168651); +#168651 = CARTESIAN_POINT('',(188.99544,-101.404003,1.585)); +#168652 = LINE('',#168653,#168654); +#168653 = CARTESIAN_POINT('',(189.235159,-101.164285,1.585)); +#168654 = VECTOR('',#168655,1.); +#168655 = DIRECTION('',(-0.707108256054,-0.707105306316,0.)); +#168656 = ORIENTED_EDGE('',*,*,#168657,.T.); +#168657 = EDGE_CURVE('',#168650,#168658,#168660,.T.); +#168658 = VERTEX_POINT('',#168659); +#168659 = CARTESIAN_POINT('',(189.249753,-101.745489,1.585)); +#168660 = LINE('',#168661,#168662); +#168661 = CARTESIAN_POINT('',(188.99544,-101.404003,1.585)); +#168662 = VECTOR('',#168663,1.); +#168663 = DIRECTION('',(0.5972886794,-0.802026329655,0.)); +#168664 = ORIENTED_EDGE('',*,*,#168665,.T.); +#168665 = EDGE_CURVE('',#168658,#168666,#168668,.T.); +#168666 = VERTEX_POINT('',#168667); +#168667 = CARTESIAN_POINT('',(189.122126,-101.822919,1.585)); +#168668 = CIRCLE('',#168669,7.500042710846E-02); +#168669 = AXIS2_PLACEMENT_3D('',#168670,#168671,#168672); +#168670 = CARTESIAN_POINT('',(189.18212611876,-101.7779184465,1.585)); +#168671 = DIRECTION('',(0.,0.,-1.)); +#168672 = DIRECTION('',(0.901686614921,0.432390157695,0.)); +#168673 = ORIENTED_EDGE('',*,*,#168674,.T.); +#168674 = EDGE_CURVE('',#168666,#168675,#168677,.T.); +#168675 = VERTEX_POINT('',#168676); +#168676 = CARTESIAN_POINT('',(188.888297,-101.511146,1.585)); +#168677 = LINE('',#168678,#168679); +#168678 = CARTESIAN_POINT('',(189.122126,-101.822919,1.585)); +#168679 = VECTOR('',#168680,1.); +#168680 = DIRECTION('',(-0.599998768333,0.800000923749,0.)); +#168681 = ORIENTED_EDGE('',*,*,#168682,.T.); +#168682 = EDGE_CURVE('',#168675,#168683,#168685,.T.); +#168683 = VERTEX_POINT('',#168684); +#168684 = CARTESIAN_POINT('',(188.876174,-101.52327,1.585)); +#168685 = LINE('',#168686,#168687); +#168686 = CARTESIAN_POINT('',(188.888297,-101.511146,1.585)); +#168687 = VECTOR('',#168688,1.); +#168688 = DIRECTION('',(-0.707077617935,-0.707135943235,0.)); +#168689 = ORIENTED_EDGE('',*,*,#168690,.T.); +#168690 = EDGE_CURVE('',#168683,#168691,#168693,.T.); +#168691 = VERTEX_POINT('',#168692); +#168692 = CARTESIAN_POINT('',(188.874733,-101.792551,1.585)); +#168693 = LINE('',#168694,#168695); +#168694 = CARTESIAN_POINT('',(188.876174,-101.52327,1.585)); +#168695 = VECTOR('',#168696,1.); +#168696 = DIRECTION('',(-5.351210698141E-03,-0.99998568217,0.)); +#168697 = ORIENTED_EDGE('',*,*,#168698,.T.); +#168698 = EDGE_CURVE('',#168691,#168699,#168701,.T.); +#168699 = VERTEX_POINT('',#168700); +#168700 = CARTESIAN_POINT('',(188.726174,-101.777919,1.585)); +#168701 = CIRCLE('',#168702,7.500006711465E-02); +#168702 = AXIS2_PLACEMENT_3D('',#168703,#168704,#168705); +#168703 = CARTESIAN_POINT('',(188.80117406711,-101.7779190671,1.585)); +#168704 = DIRECTION('',(-0.,0.,-1.)); +#168705 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#168706 = ORIENTED_EDGE('',*,*,#168707,.T.); +#168707 = EDGE_CURVE('',#168699,#168708,#168710,.T.); +#168708 = VERTEX_POINT('',#168709); +#168709 = CARTESIAN_POINT('',(188.727615,-100.763287,1.585)); +#168710 = LINE('',#168711,#168712); +#168711 = CARTESIAN_POINT('',(188.726174,-101.777919,1.585)); +#168712 = VECTOR('',#168713,1.); +#168713 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#168714 = ORIENTED_EDGE('',*,*,#168715,.T.); +#168715 = EDGE_CURVE('',#168708,#168716,#168718,.T.); +#168716 = VERTEX_POINT('',#168717); +#168717 = CARTESIAN_POINT('',(188.738814,-100.736251,1.585)); +#168718 = LINE('',#168719,#168720); +#168719 = CARTESIAN_POINT('',(188.727615,-100.763287,1.585)); +#168720 = VECTOR('',#168721,1.); +#168721 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#168722 = ORIENTED_EDGE('',*,*,#168723,.T.); +#168723 = EDGE_CURVE('',#168716,#168614,#168724,.T.); +#168724 = LINE('',#168725,#168726); +#168725 = CARTESIAN_POINT('',(188.738814,-100.736251,1.585)); +#168726 = VECTOR('',#168727,1.); +#168727 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#168728 = PLANE('',#168729); +#168729 = AXIS2_PLACEMENT_3D('',#168730,#168731,#168732); +#168730 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168731 = DIRECTION('',(0.,0.,1.)); +#168732 = DIRECTION('',(1.,0.,-0.)); +#168733 = SHELL_BASED_SURFACE_MODEL('',(#168734)); +#168734 = OPEN_SHELL('',(#168735)); +#168735 = ADVANCED_FACE('',(#168736,#168852),#168935,.T.); +#168736 = FACE_BOUND('',#168737,.F.); +#168737 = EDGE_LOOP('',(#168738,#168749,#168757,#168765,#168773,#168781, + #168789,#168797,#168805,#168813,#168821,#168829,#168837,#168846)); +#168738 = ORIENTED_EDGE('',*,*,#168739,.T.); +#168739 = EDGE_CURVE('',#168740,#168742,#168744,.T.); +#168740 = VERTEX_POINT('',#168741); +#168741 = CARTESIAN_POINT('',(186.822853,-100.763287,1.585)); +#168742 = VERTEX_POINT('',#168743); +#168743 = CARTESIAN_POINT('',(186.896412,-100.702919,1.585)); +#168744 = CIRCLE('',#168745,7.500074938985E-02); +#168745 = AXIS2_PLACEMENT_3D('',#168746,#168747,#168748); +#168746 = CARTESIAN_POINT('',(186.89641246611,-100.7779197493,1.585)); +#168747 = DIRECTION('',(0.,0.,-1.)); +#168748 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#168749 = ORIENTED_EDGE('',*,*,#168750,.T.); +#168750 = EDGE_CURVE('',#168742,#168751,#168753,.T.); +#168751 = VERTEX_POINT('',#168752); +#168752 = CARTESIAN_POINT('',(187.141912,-100.703648,1.585)); +#168753 = LINE('',#168754,#168755); +#168754 = CARTESIAN_POINT('',(186.896412,-100.702919,1.585)); +#168755 = VECTOR('',#168756,1.); +#168756 = DIRECTION('',(0.999995591212,-2.969437010186E-03,0.)); +#168757 = ORIENTED_EDGE('',*,*,#168758,.T.); +#168758 = EDGE_CURVE('',#168751,#168759,#168761,.T.); +#168759 = VERTEX_POINT('',#168760); +#168760 = CARTESIAN_POINT('',(187.319032,-100.763178,1.585)); +#168761 = LINE('',#168762,#168763); +#168762 = CARTESIAN_POINT('',(187.141912,-100.703648,1.585)); +#168763 = VECTOR('',#168764,1.); +#168764 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#168765 = ORIENTED_EDGE('',*,*,#168766,.T.); +#168766 = EDGE_CURVE('',#168759,#168767,#168769,.T.); +#168767 = VERTEX_POINT('',#168768); +#168768 = CARTESIAN_POINT('',(187.435721,-100.88094,1.585)); +#168769 = LINE('',#168770,#168771); +#168770 = CARTESIAN_POINT('',(187.319032,-100.763178,1.585)); +#168771 = VECTOR('',#168772,1.); +#168772 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#168773 = ORIENTED_EDGE('',*,*,#168774,.T.); +#168774 = EDGE_CURVE('',#168767,#168775,#168777,.T.); +#168775 = VERTEX_POINT('',#168776); +#168776 = CARTESIAN_POINT('',(187.492982,-100.997824,1.585)); +#168777 = LINE('',#168778,#168779); +#168778 = CARTESIAN_POINT('',(187.435721,-100.88094,1.585)); +#168779 = VECTOR('',#168780,1.); +#168780 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#168781 = ORIENTED_EDGE('',*,*,#168782,.T.); +#168782 = EDGE_CURVE('',#168775,#168783,#168785,.T.); +#168783 = VERTEX_POINT('',#168784); +#168784 = CARTESIAN_POINT('',(187.54284,-101.20649,1.585)); +#168785 = LINE('',#168786,#168787); +#168786 = CARTESIAN_POINT('',(187.492982,-100.997824,1.585)); +#168787 = VECTOR('',#168788,1.); +#168788 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#168789 = ORIENTED_EDGE('',*,*,#168790,.T.); +#168790 = EDGE_CURVE('',#168783,#168791,#168793,.T.); +#168791 = VERTEX_POINT('',#168792); +#168792 = CARTESIAN_POINT('',(187.540601,-101.367537,1.585)); +#168793 = LINE('',#168794,#168795); +#168794 = CARTESIAN_POINT('',(187.54284,-101.20649,1.585)); +#168795 = VECTOR('',#168796,1.); +#168796 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#168797 = ORIENTED_EDGE('',*,*,#168798,.T.); +#168798 = EDGE_CURVE('',#168791,#168799,#168801,.T.); +#168799 = VERTEX_POINT('',#168800); +#168800 = CARTESIAN_POINT('',(187.487303,-101.573364,1.585)); +#168801 = LINE('',#168802,#168803); +#168802 = CARTESIAN_POINT('',(187.540601,-101.367537,1.585)); +#168803 = VECTOR('',#168804,1.); +#168804 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#168805 = ORIENTED_EDGE('',*,*,#168806,.T.); +#168806 = EDGE_CURVE('',#168799,#168807,#168809,.T.); +#168807 = VERTEX_POINT('',#168808); +#168808 = CARTESIAN_POINT('',(187.430353,-101.682344,1.585)); +#168809 = LINE('',#168810,#168811); +#168810 = CARTESIAN_POINT('',(187.487303,-101.573364,1.585)); +#168811 = VECTOR('',#168812,1.); +#168812 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#168813 = ORIENTED_EDGE('',*,*,#168814,.T.); +#168814 = EDGE_CURVE('',#168807,#168815,#168817,.T.); +#168815 = VERTEX_POINT('',#168816); +#168816 = CARTESIAN_POINT('',(187.314506,-101.795457,1.585)); +#168817 = LINE('',#168818,#168819); +#168818 = CARTESIAN_POINT('',(187.430353,-101.682344,1.585)); +#168819 = VECTOR('',#168820,1.); +#168820 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#168821 = ORIENTED_EDGE('',*,*,#168822,.T.); +#168822 = EDGE_CURVE('',#168815,#168823,#168825,.T.); +#168823 = VERTEX_POINT('',#168824); +#168824 = CARTESIAN_POINT('',(187.141912,-101.852189,1.585)); +#168825 = LINE('',#168826,#168827); +#168826 = CARTESIAN_POINT('',(187.314506,-101.795457,1.585)); +#168827 = VECTOR('',#168828,1.); +#168828 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#168829 = ORIENTED_EDGE('',*,*,#168830,.T.); +#168830 = EDGE_CURVE('',#168823,#168831,#168833,.T.); +#168831 = VERTEX_POINT('',#168832); +#168832 = CARTESIAN_POINT('',(186.88178,-101.851478,1.585)); +#168833 = LINE('',#168834,#168835); +#168834 = CARTESIAN_POINT('',(187.141912,-101.852189,1.585)); +#168835 = VECTOR('',#168836,1.); +#168836 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#168837 = ORIENTED_EDGE('',*,*,#168838,.T.); +#168838 = EDGE_CURVE('',#168831,#168839,#168841,.T.); +#168839 = VERTEX_POINT('',#168840); +#168840 = CARTESIAN_POINT('',(186.821412,-101.777919,1.585)); +#168841 = CIRCLE('',#168842,7.500074938991E-02); +#168842 = AXIS2_PLACEMENT_3D('',#168843,#168844,#168845); +#168843 = CARTESIAN_POINT('',(186.89641274938,-101.7779185338,1.585)); +#168844 = DIRECTION('',(0.,0.,-1.)); +#168845 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#168846 = ORIENTED_EDGE('',*,*,#168847,.T.); +#168847 = EDGE_CURVE('',#168839,#168740,#168848,.T.); +#168848 = LINE('',#168849,#168850); +#168849 = CARTESIAN_POINT('',(186.821412,-101.777919,1.585)); +#168850 = VECTOR('',#168851,1.); +#168851 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#168852 = FACE_BOUND('',#168853,.F.); +#168853 = EDGE_LOOP('',(#168854,#168864,#168872,#168880,#168888,#168896, + #168904,#168913,#168921,#168929)); +#168854 = ORIENTED_EDGE('',*,*,#168855,.T.); +#168855 = EDGE_CURVE('',#168856,#168858,#168860,.T.); +#168856 = VERTEX_POINT('',#168857); +#168857 = CARTESIAN_POINT('',(187.23685,-100.89109,1.585)); +#168858 = VERTEX_POINT('',#168859); +#168859 = CARTESIAN_POINT('',(187.122337,-100.852919,1.585)); +#168860 = LINE('',#168861,#168862); +#168861 = CARTESIAN_POINT('',(187.23685,-100.89109,1.585)); +#168862 = VECTOR('',#168863,1.); +#168863 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#168864 = ORIENTED_EDGE('',*,*,#168865,.T.); +#168865 = EDGE_CURVE('',#168858,#168866,#168868,.T.); +#168866 = VERTEX_POINT('',#168867); +#168867 = CARTESIAN_POINT('',(186.971412,-100.852919,1.585)); +#168868 = LINE('',#168869,#168870); +#168869 = CARTESIAN_POINT('',(187.122337,-100.852919,1.585)); +#168870 = VECTOR('',#168871,1.); +#168871 = DIRECTION('',(-1.,0.,0.)); +#168872 = ORIENTED_EDGE('',*,*,#168873,.T.); +#168873 = EDGE_CURVE('',#168866,#168874,#168876,.T.); +#168874 = VERTEX_POINT('',#168875); +#168875 = CARTESIAN_POINT('',(186.971412,-101.702919,1.585)); +#168876 = LINE('',#168877,#168878); +#168877 = CARTESIAN_POINT('',(186.971412,-100.852919,1.585)); +#168878 = VECTOR('',#168879,1.); +#168879 = DIRECTION('',(0.,-1.,0.)); +#168880 = ORIENTED_EDGE('',*,*,#168881,.T.); +#168881 = EDGE_CURVE('',#168874,#168882,#168884,.T.); +#168882 = VERTEX_POINT('',#168883); +#168883 = CARTESIAN_POINT('',(187.122337,-101.702919,1.585)); +#168884 = LINE('',#168885,#168886); +#168885 = CARTESIAN_POINT('',(186.971412,-101.702919,1.585)); +#168886 = VECTOR('',#168887,1.); +#168887 = DIRECTION('',(1.,0.,0.)); +#168888 = ORIENTED_EDGE('',*,*,#168889,.T.); +#168889 = EDGE_CURVE('',#168882,#168890,#168892,.T.); +#168890 = VERTEX_POINT('',#168891); +#168891 = CARTESIAN_POINT('',(187.23685,-101.664747,1.585)); +#168892 = LINE('',#168893,#168894); +#168893 = CARTESIAN_POINT('',(187.122337,-101.702919,1.585)); +#168894 = VECTOR('',#168895,1.); +#168895 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#168896 = ORIENTED_EDGE('',*,*,#168897,.T.); +#168897 = EDGE_CURVE('',#168890,#168898,#168900,.T.); +#168898 = VERTEX_POINT('',#168899); +#168899 = CARTESIAN_POINT('',(187.310962,-101.590634,1.585)); +#168900 = LINE('',#168901,#168902); +#168901 = CARTESIAN_POINT('',(187.23685,-101.664747,1.585)); +#168902 = VECTOR('',#168903,1.); +#168903 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#168904 = ORIENTED_EDGE('',*,*,#168905,.T.); +#168905 = EDGE_CURVE('',#168898,#168906,#168908,.T.); +#168906 = VERTEX_POINT('',#168907); +#168907 = CARTESIAN_POINT('',(187.39284,-101.215724,1.585)); +#168908 = CIRCLE('',#168909,0.611719141131); +#168909 = AXIS2_PLACEMENT_3D('',#168910,#168911,#168912); +#168910 = CARTESIAN_POINT('',(186.78442796224,-101.2792464364,1.585)); +#168911 = DIRECTION('',(0.,0.,1.)); +#168912 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#168913 = ORIENTED_EDGE('',*,*,#168914,.T.); +#168914 = EDGE_CURVE('',#168906,#168915,#168917,.T.); +#168915 = VERTEX_POINT('',#168916); +#168916 = CARTESIAN_POINT('',(187.349456,-101.04219,1.585)); +#168917 = LINE('',#168918,#168919); +#168918 = CARTESIAN_POINT('',(187.39284,-101.215724,1.585)); +#168919 = VECTOR('',#168920,1.); +#168920 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#168921 = ORIENTED_EDGE('',*,*,#168922,.T.); +#168922 = EDGE_CURVE('',#168915,#168923,#168925,.T.); +#168923 = VERTEX_POINT('',#168924); +#168924 = CARTESIAN_POINT('',(187.310963,-100.965203,1.585)); +#168925 = LINE('',#168926,#168927); +#168926 = CARTESIAN_POINT('',(187.349456,-101.04219,1.585)); +#168927 = VECTOR('',#168928,1.); +#168928 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#168929 = ORIENTED_EDGE('',*,*,#168930,.T.); +#168930 = EDGE_CURVE('',#168923,#168856,#168931,.T.); +#168931 = LINE('',#168932,#168933); +#168932 = CARTESIAN_POINT('',(187.310963,-100.965203,1.585)); +#168933 = VECTOR('',#168934,1.); +#168934 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#168935 = PLANE('',#168936); +#168936 = AXIS2_PLACEMENT_3D('',#168937,#168938,#168939); +#168937 = CARTESIAN_POINT('',(0.,0.,1.585)); +#168938 = DIRECTION('',(0.,0.,1.)); +#168939 = DIRECTION('',(1.,0.,-0.)); +#168940 = SHELL_BASED_SURFACE_MODEL('',(#168941)); +#168941 = OPEN_SHELL('',(#168942)); +#168942 = ADVANCED_FACE('',(#168943,#169061),#169129,.T.); +#168943 = FACE_BOUND('',#168944,.F.); +#168944 = EDGE_LOOP('',(#168945,#168956,#168964,#168972,#168981,#168989, + #168998,#169006,#169014,#169023,#169031,#169039,#169047,#169055)); +#168945 = ORIENTED_EDGE('',*,*,#168946,.T.); +#168946 = EDGE_CURVE('',#168947,#168949,#168951,.T.); +#168947 = VERTEX_POINT('',#168948); +#168948 = CARTESIAN_POINT('',(187.854744,-100.715559,1.585)); +#168949 = VERTEX_POINT('',#168950); +#168950 = CARTESIAN_POINT('',(187.971412,-100.777919,1.585)); +#168951 = CIRCLE('',#168952,7.500000000001E-02); +#168952 = AXIS2_PLACEMENT_3D('',#168953,#168954,#168955); +#168953 = CARTESIAN_POINT('',(187.896412,-100.7779190655,1.585)); +#168954 = DIRECTION('',(0.,0.,-1.)); +#168955 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#168956 = ORIENTED_EDGE('',*,*,#168957,.T.); +#168957 = EDGE_CURVE('',#168949,#168958,#168960,.T.); +#168958 = VERTEX_POINT('',#168959); +#168959 = CARTESIAN_POINT('',(187.97184,-101.038915,1.585)); +#168960 = LINE('',#168961,#168962); +#168961 = CARTESIAN_POINT('',(187.971412,-100.777919,1.585)); +#168962 = VECTOR('',#168963,1.); +#168963 = DIRECTION('',(1.639869670478E-03,-0.999998655413,0.)); +#168964 = ORIENTED_EDGE('',*,*,#168965,.T.); +#168965 = EDGE_CURVE('',#168958,#168966,#168968,.T.); +#168966 = VERTEX_POINT('',#168967); +#168967 = CARTESIAN_POINT('',(188.201935,-101.038915,1.585)); +#168968 = LINE('',#168969,#168970); +#168969 = CARTESIAN_POINT('',(187.97184,-101.038915,1.585)); +#168970 = VECTOR('',#168971,1.); +#168971 = DIRECTION('',(1.,0.,0.)); +#168972 = ORIENTED_EDGE('',*,*,#168973,.T.); +#168973 = EDGE_CURVE('',#168966,#168974,#168976,.T.); +#168974 = VERTEX_POINT('',#168975); +#168975 = CARTESIAN_POINT('',(188.446161,-101.287096,1.585)); +#168976 = CIRCLE('',#168977,0.348625649748); +#168977 = AXIS2_PLACEMENT_3D('',#168978,#168979,#168980); +#168978 = CARTESIAN_POINT('',(188.10876304586,-101.3748596838,1.585)); +#168979 = DIRECTION('',(0.,0.,-1.)); +#168980 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#168981 = ORIENTED_EDGE('',*,*,#168982,.T.); +#168982 = EDGE_CURVE('',#168974,#168983,#168985,.T.); +#168983 = VERTEX_POINT('',#168984); +#168984 = CARTESIAN_POINT('',(188.444939,-101.607252,1.585)); +#168985 = LINE('',#168986,#168987); +#168986 = CARTESIAN_POINT('',(188.446161,-101.287096,1.585)); +#168987 = VECTOR('',#168988,1.); +#168988 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#168989 = ORIENTED_EDGE('',*,*,#168990,.T.); +#168990 = EDGE_CURVE('',#168983,#168991,#168993,.T.); +#168991 = VERTEX_POINT('',#168992); +#168992 = CARTESIAN_POINT('',(188.196758,-101.851478,1.585)); +#168993 = CIRCLE('',#168994,0.348635327447); +#168994 = AXIS2_PLACEMENT_3D('',#168995,#168996,#168997); +#168995 = CARTESIAN_POINT('',(188.10898648129,-101.5140720841,1.585)); +#168996 = DIRECTION('',(0.,0.,-1.)); +#168997 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#168998 = ORIENTED_EDGE('',*,*,#168999,.T.); +#168999 = EDGE_CURVE('',#168991,#169000,#169002,.T.); +#169000 = VERTEX_POINT('',#169001); +#169001 = CARTESIAN_POINT('',(187.97184,-101.850256,1.585)); +#169002 = LINE('',#169003,#169004); +#169003 = CARTESIAN_POINT('',(188.196758,-101.851478,1.585)); +#169004 = VECTOR('',#169005,1.); +#169005 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#169006 = ORIENTED_EDGE('',*,*,#169007,.T.); +#169007 = EDGE_CURVE('',#169000,#169008,#169010,.T.); +#169008 = VERTEX_POINT('',#169009); +#169009 = CARTESIAN_POINT('',(187.941608,-101.83675,1.585)); +#169010 = LINE('',#169011,#169012); +#169011 = CARTESIAN_POINT('',(187.97184,-101.850256,1.585)); +#169012 = VECTOR('',#169013,1.); +#169013 = DIRECTION('',(-0.913030248774,0.407891854325,0.)); +#169014 = ORIENTED_EDGE('',*,*,#169015,.T.); +#169015 = EDGE_CURVE('',#169008,#169016,#169018,.T.); +#169016 = VERTEX_POINT('',#169017); +#169017 = CARTESIAN_POINT('',(187.854744,-101.840279,1.585)); +#169018 = CIRCLE('',#169019,7.226397606084E-02); +#169019 = AXIS2_PLACEMENT_3D('',#169020,#169021,#169022); +#169020 = CARTESIAN_POINT('',(187.89583259538,-101.7808331459,1.585)); +#169021 = DIRECTION('',(-0.,0.,-1.)); +#169022 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#169023 = ORIENTED_EDGE('',*,*,#169024,.T.); +#169024 = EDGE_CURVE('',#169016,#169025,#169027,.T.); +#169025 = VERTEX_POINT('',#169026); +#169026 = CARTESIAN_POINT('',(187.834052,-101.819587,1.585)); +#169027 = LINE('',#169028,#169029); +#169028 = CARTESIAN_POINT('',(187.854744,-101.840279,1.585)); +#169029 = VECTOR('',#169030,1.); +#169030 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#169031 = ORIENTED_EDGE('',*,*,#169032,.T.); +#169032 = EDGE_CURVE('',#169025,#169033,#169035,.T.); +#169033 = VERTEX_POINT('',#169034); +#169034 = CARTESIAN_POINT('',(187.821412,-101.777919,1.585)); +#169035 = LINE('',#169036,#169037); +#169036 = CARTESIAN_POINT('',(187.834052,-101.819587,1.585)); +#169037 = VECTOR('',#169038,1.); +#169038 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#169039 = ORIENTED_EDGE('',*,*,#169040,.T.); +#169040 = EDGE_CURVE('',#169033,#169041,#169043,.T.); +#169041 = VERTEX_POINT('',#169042); +#169042 = CARTESIAN_POINT('',(187.822853,-100.763287,1.585)); +#169043 = LINE('',#169044,#169045); +#169044 = CARTESIAN_POINT('',(187.821412,-101.777919,1.585)); +#169045 = VECTOR('',#169046,1.); +#169046 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#169047 = ORIENTED_EDGE('',*,*,#169048,.T.); +#169048 = EDGE_CURVE('',#169041,#169049,#169051,.T.); +#169049 = VERTEX_POINT('',#169050); +#169050 = CARTESIAN_POINT('',(187.834052,-100.736251,1.585)); +#169051 = LINE('',#169052,#169053); +#169052 = CARTESIAN_POINT('',(187.822853,-100.763287,1.585)); +#169053 = VECTOR('',#169054,1.); +#169054 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169055 = ORIENTED_EDGE('',*,*,#169056,.T.); +#169056 = EDGE_CURVE('',#169049,#168947,#169057,.T.); +#169057 = LINE('',#169058,#169059); +#169058 = CARTESIAN_POINT('',(187.834052,-100.736251,1.585)); +#169059 = VECTOR('',#169060,1.); +#169060 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#169061 = FACE_BOUND('',#169062,.F.); +#169062 = EDGE_LOOP('',(#169063,#169074,#169082,#169090,#169098,#169106, + #169114,#169123)); +#169063 = ORIENTED_EDGE('',*,*,#169064,.T.); +#169064 = EDGE_CURVE('',#169065,#169067,#169069,.T.); +#169065 = VERTEX_POINT('',#169066); +#169066 = CARTESIAN_POINT('',(188.297602,-101.319433,1.585)); +#169067 = VERTEX_POINT('',#169068); +#169068 = CARTESIAN_POINT('',(188.164421,-101.186252,1.585)); +#169069 = CIRCLE('',#169070,0.18686440374); +#169070 = AXIS2_PLACEMENT_3D('',#169071,#169072,#169073); +#169071 = CARTESIAN_POINT('',(188.116885,-101.366969,1.585)); +#169072 = DIRECTION('',(0.,0.,1.)); +#169073 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#169074 = ORIENTED_EDGE('',*,*,#169075,.T.); +#169075 = EDGE_CURVE('',#169067,#169076,#169078,.T.); +#169076 = VERTEX_POINT('',#169077); +#169077 = CARTESIAN_POINT('',(188.009355,-101.186252,1.585)); +#169078 = LINE('',#169079,#169080); +#169079 = CARTESIAN_POINT('',(188.164421,-101.186252,1.585)); +#169080 = VECTOR('',#169081,1.); +#169081 = DIRECTION('',(-1.,0.,0.)); +#169082 = ORIENTED_EDGE('',*,*,#169083,.T.); +#169083 = EDGE_CURVE('',#169076,#169084,#169086,.T.); +#169084 = VERTEX_POINT('',#169085); +#169085 = CARTESIAN_POINT('',(187.971412,-101.205223,1.585)); +#169086 = LINE('',#169087,#169088); +#169087 = CARTESIAN_POINT('',(188.009355,-101.186252,1.585)); +#169088 = VECTOR('',#169089,1.); +#169089 = DIRECTION('',(-0.894431905558,-0.447204166259,0.)); +#169090 = ORIENTED_EDGE('',*,*,#169091,.T.); +#169091 = EDGE_CURVE('',#169084,#169092,#169094,.T.); +#169092 = VERTEX_POINT('',#169093); +#169093 = CARTESIAN_POINT('',(187.971412,-101.683947,1.585)); +#169094 = LINE('',#169095,#169096); +#169095 = CARTESIAN_POINT('',(187.971412,-101.205223,1.585)); +#169096 = VECTOR('',#169097,1.); +#169097 = DIRECTION('',(0.,-1.,0.)); +#169098 = ORIENTED_EDGE('',*,*,#169099,.T.); +#169099 = EDGE_CURVE('',#169092,#169100,#169102,.T.); +#169100 = VERTEX_POINT('',#169101); +#169101 = CARTESIAN_POINT('',(188.009355,-101.702919,1.585)); +#169102 = LINE('',#169103,#169104); +#169103 = CARTESIAN_POINT('',(187.971412,-101.683947,1.585)); +#169104 = VECTOR('',#169105,1.); +#169105 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#169106 = ORIENTED_EDGE('',*,*,#169107,.T.); +#169107 = EDGE_CURVE('',#169100,#169108,#169110,.T.); +#169108 = VERTEX_POINT('',#169109); +#169109 = CARTESIAN_POINT('',(188.164421,-101.702919,1.585)); +#169110 = LINE('',#169111,#169112); +#169111 = CARTESIAN_POINT('',(188.009355,-101.702919,1.585)); +#169112 = VECTOR('',#169113,1.); +#169113 = DIRECTION('',(1.,0.,0.)); +#169114 = ORIENTED_EDGE('',*,*,#169115,.T.); +#169115 = EDGE_CURVE('',#169108,#169116,#169118,.T.); +#169116 = VERTEX_POINT('',#169117); +#169117 = CARTESIAN_POINT('',(188.297602,-101.569737,1.585)); +#169118 = CIRCLE('',#169119,0.186867760544); +#169119 = AXIS2_PLACEMENT_3D('',#169120,#169121,#169122); +#169120 = CARTESIAN_POINT('',(188.11688196928,-101.5221993262,1.585)); +#169121 = DIRECTION('',(0.,0.,1.)); +#169122 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#169123 = ORIENTED_EDGE('',*,*,#169124,.T.); +#169124 = EDGE_CURVE('',#169116,#169065,#169125,.T.); +#169125 = LINE('',#169126,#169127); +#169126 = CARTESIAN_POINT('',(188.297602,-101.569737,1.585)); +#169127 = VECTOR('',#169128,1.); +#169128 = DIRECTION('',(0.,1.,0.)); +#169129 = PLANE('',#169130); +#169130 = AXIS2_PLACEMENT_3D('',#169131,#169132,#169133); +#169131 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169132 = DIRECTION('',(0.,0.,1.)); +#169133 = DIRECTION('',(1.,0.,-0.)); +#169134 = SHELL_BASED_SURFACE_MODEL('',(#169135)); +#169135 = OPEN_SHELL('',(#169136)); +#169136 = ADVANCED_FACE('',(#169137,#169239),#169307,.T.); +#169137 = FACE_BOUND('',#169138,.F.); +#169138 = EDGE_LOOP('',(#169139,#169150,#169158,#169166,#169175,#169183, + #169192,#169200,#169208,#169217,#169225,#169233)); +#169139 = ORIENTED_EDGE('',*,*,#169140,.T.); +#169140 = EDGE_CURVE('',#169141,#169143,#169145,.T.); +#169141 = VERTEX_POINT('',#169142); +#169142 = CARTESIAN_POINT('',(101.396411,-100.618892,1.585)); +#169143 = VERTEX_POINT('',#169144); +#169144 = CARTESIAN_POINT('',(101.483275,-100.62242,1.585)); +#169145 = CIRCLE('',#169146,7.22664907968E-02); +#169146 = AXIS2_PLACEMENT_3D('',#169147,#169148,#169149); +#169147 = CARTESIAN_POINT('',(101.43750012996,-100.6783405415,1.585)); +#169148 = DIRECTION('',(0.,0.,-1.)); +#169149 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#169150 = ORIENTED_EDGE('',*,*,#169151,.T.); +#169151 = EDGE_CURVE('',#169143,#169152,#169154,.T.); +#169152 = VERTEX_POINT('',#169153); +#169153 = CARTESIAN_POINT('',(101.518685,-100.607693,1.585)); +#169154 = LINE('',#169155,#169156); +#169155 = CARTESIAN_POINT('',(101.483275,-100.62242,1.585)); +#169156 = VECTOR('',#169157,1.); +#169157 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#169158 = ORIENTED_EDGE('',*,*,#169159,.T.); +#169159 = EDGE_CURVE('',#169152,#169160,#169162,.T.); +#169160 = VERTEX_POINT('',#169161); +#169161 = CARTESIAN_POINT('',(101.738425,-100.607693,1.585)); +#169162 = LINE('',#169163,#169164); +#169163 = CARTESIAN_POINT('',(101.518685,-100.607693,1.585)); +#169164 = VECTOR('',#169165,1.); +#169165 = DIRECTION('',(1.,0.,0.)); +#169166 = ORIENTED_EDGE('',*,*,#169167,.T.); +#169167 = EDGE_CURVE('',#169160,#169168,#169170,.T.); +#169168 = VERTEX_POINT('',#169169); +#169169 = CARTESIAN_POINT('',(101.987828,-100.857096,1.585)); +#169170 = CIRCLE('',#169171,0.347870264855); +#169171 = AXIS2_PLACEMENT_3D('',#169172,#169173,#169174); +#169172 = CARTESIAN_POINT('',(101.65109726502,-100.9444237349,1.585)); +#169173 = DIRECTION('',(0.,0.,-1.)); +#169174 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#169175 = ORIENTED_EDGE('',*,*,#169176,.T.); +#169176 = EDGE_CURVE('',#169168,#169177,#169179,.T.); +#169177 = VERTEX_POINT('',#169178); +#169178 = CARTESIAN_POINT('',(101.986606,-101.177252,1.585)); +#169179 = LINE('',#169180,#169181); +#169180 = CARTESIAN_POINT('',(101.987828,-100.857096,1.585)); +#169181 = VECTOR('',#169182,1.); +#169182 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#169183 = ORIENTED_EDGE('',*,*,#169184,.T.); +#169184 = EDGE_CURVE('',#169177,#169185,#169187,.T.); +#169185 = VERTEX_POINT('',#169186); +#169186 = CARTESIAN_POINT('',(101.738425,-101.421478,1.585)); +#169187 = CIRCLE('',#169188,0.348635327447); +#169188 = AXIS2_PLACEMENT_3D('',#169189,#169190,#169191); +#169189 = CARTESIAN_POINT('',(101.65065348129,-101.0840720841,1.585)); +#169190 = DIRECTION('',(0.,0.,-1.)); +#169191 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#169192 = ORIENTED_EDGE('',*,*,#169193,.T.); +#169193 = EDGE_CURVE('',#169185,#169194,#169196,.T.); +#169194 = VERTEX_POINT('',#169195); +#169195 = CARTESIAN_POINT('',(101.513079,-101.420092,1.585)); +#169196 = LINE('',#169197,#169198); +#169197 = CARTESIAN_POINT('',(101.738425,-101.421478,1.585)); +#169198 = VECTOR('',#169199,1.); +#169199 = DIRECTION('',(-0.999981085954,6.150425501802E-03,0.)); +#169200 = ORIENTED_EDGE('',*,*,#169201,.T.); +#169201 = EDGE_CURVE('',#169194,#169202,#169204,.T.); +#169202 = VERTEX_POINT('',#169203); +#169203 = CARTESIAN_POINT('',(101.511638,-101.695884,1.585)); +#169204 = LINE('',#169205,#169206); +#169205 = CARTESIAN_POINT('',(101.513079,-101.420092,1.585)); +#169206 = VECTOR('',#169207,1.); +#169207 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#169208 = ORIENTED_EDGE('',*,*,#169209,.T.); +#169209 = EDGE_CURVE('',#169202,#169210,#169212,.T.); +#169210 = VERTEX_POINT('',#169211); +#169211 = CARTESIAN_POINT('',(101.363079,-101.681252,1.585)); +#169212 = CIRCLE('',#169213,7.500006711464E-02); +#169213 = AXIS2_PLACEMENT_3D('',#169214,#169215,#169216); +#169214 = CARTESIAN_POINT('',(101.43807906711,-101.6812520671,1.585)); +#169215 = DIRECTION('',(-0.,0.,-1.)); +#169216 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#169217 = ORIENTED_EDGE('',*,*,#169218,.T.); +#169218 = EDGE_CURVE('',#169210,#169219,#169221,.T.); +#169219 = VERTEX_POINT('',#169220); +#169220 = CARTESIAN_POINT('',(101.36452,-100.66662,1.585)); +#169221 = LINE('',#169222,#169223); +#169222 = CARTESIAN_POINT('',(101.363079,-101.681252,1.585)); +#169223 = VECTOR('',#169224,1.); +#169224 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#169225 = ORIENTED_EDGE('',*,*,#169226,.T.); +#169226 = EDGE_CURVE('',#169219,#169227,#169229,.T.); +#169227 = VERTEX_POINT('',#169228); +#169228 = CARTESIAN_POINT('',(101.375719,-100.639584,1.585)); +#169229 = LINE('',#169230,#169231); +#169230 = CARTESIAN_POINT('',(101.36452,-100.66662,1.585)); +#169231 = VECTOR('',#169232,1.); +#169232 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169233 = ORIENTED_EDGE('',*,*,#169234,.T.); +#169234 = EDGE_CURVE('',#169227,#169141,#169235,.T.); +#169235 = LINE('',#169236,#169237); +#169236 = CARTESIAN_POINT('',(101.375719,-100.639584,1.585)); +#169237 = VECTOR('',#169238,1.); +#169238 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#169239 = FACE_BOUND('',#169240,.F.); +#169240 = EDGE_LOOP('',(#169241,#169252,#169260,#169268,#169276,#169284, + #169292,#169301)); +#169241 = ORIENTED_EDGE('',*,*,#169242,.T.); +#169242 = EDGE_CURVE('',#169243,#169245,#169247,.T.); +#169243 = VERTEX_POINT('',#169244); +#169244 = CARTESIAN_POINT('',(101.839269,-100.889433,1.585)); +#169245 = VERTEX_POINT('',#169246); +#169246 = CARTESIAN_POINT('',(101.706088,-100.756252,1.585)); +#169247 = CIRCLE('',#169248,0.18686440374); +#169248 = AXIS2_PLACEMENT_3D('',#169249,#169250,#169251); +#169249 = CARTESIAN_POINT('',(101.658552,-100.936969,1.585)); +#169250 = DIRECTION('',(0.,0.,1.)); +#169251 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#169252 = ORIENTED_EDGE('',*,*,#169253,.T.); +#169253 = EDGE_CURVE('',#169245,#169254,#169256,.T.); +#169254 = VERTEX_POINT('',#169255); +#169255 = CARTESIAN_POINT('',(101.551022,-100.756252,1.585)); +#169256 = LINE('',#169257,#169258); +#169257 = CARTESIAN_POINT('',(101.706088,-100.756252,1.585)); +#169258 = VECTOR('',#169259,1.); +#169259 = DIRECTION('',(-1.,0.,0.)); +#169260 = ORIENTED_EDGE('',*,*,#169261,.T.); +#169261 = EDGE_CURVE('',#169254,#169262,#169264,.T.); +#169262 = VERTEX_POINT('',#169263); +#169263 = CARTESIAN_POINT('',(101.513079,-100.775223,1.585)); +#169264 = LINE('',#169265,#169266); +#169265 = CARTESIAN_POINT('',(101.551022,-100.756252,1.585)); +#169266 = VECTOR('',#169267,1.); +#169267 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#169268 = ORIENTED_EDGE('',*,*,#169269,.T.); +#169269 = EDGE_CURVE('',#169262,#169270,#169272,.T.); +#169270 = VERTEX_POINT('',#169271); +#169271 = CARTESIAN_POINT('',(101.513079,-101.253947,1.585)); +#169272 = LINE('',#169273,#169274); +#169273 = CARTESIAN_POINT('',(101.513079,-100.775223,1.585)); +#169274 = VECTOR('',#169275,1.); +#169275 = DIRECTION('',(0.,-1.,0.)); +#169276 = ORIENTED_EDGE('',*,*,#169277,.T.); +#169277 = EDGE_CURVE('',#169270,#169278,#169280,.T.); +#169278 = VERTEX_POINT('',#169279); +#169279 = CARTESIAN_POINT('',(101.551022,-101.272919,1.585)); +#169280 = LINE('',#169281,#169282); +#169281 = CARTESIAN_POINT('',(101.513079,-101.253947,1.585)); +#169282 = VECTOR('',#169283,1.); +#169283 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#169284 = ORIENTED_EDGE('',*,*,#169285,.T.); +#169285 = EDGE_CURVE('',#169278,#169286,#169288,.T.); +#169286 = VERTEX_POINT('',#169287); +#169287 = CARTESIAN_POINT('',(101.706088,-101.272919,1.585)); +#169288 = LINE('',#169289,#169290); +#169289 = CARTESIAN_POINT('',(101.551022,-101.272919,1.585)); +#169290 = VECTOR('',#169291,1.); +#169291 = DIRECTION('',(1.,0.,0.)); +#169292 = ORIENTED_EDGE('',*,*,#169293,.T.); +#169293 = EDGE_CURVE('',#169286,#169294,#169296,.T.); +#169294 = VERTEX_POINT('',#169295); +#169295 = CARTESIAN_POINT('',(101.839269,-101.139737,1.585)); +#169296 = CIRCLE('',#169297,0.186867760544); +#169297 = AXIS2_PLACEMENT_3D('',#169298,#169299,#169300); +#169298 = CARTESIAN_POINT('',(101.65854896928,-101.0921993262,1.585)); +#169299 = DIRECTION('',(0.,0.,1.)); +#169300 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#169301 = ORIENTED_EDGE('',*,*,#169302,.T.); +#169302 = EDGE_CURVE('',#169294,#169243,#169303,.T.); +#169303 = LINE('',#169304,#169305); +#169304 = CARTESIAN_POINT('',(101.839269,-101.139737,1.585)); +#169305 = VECTOR('',#169306,1.); +#169306 = DIRECTION('',(0.,1.,0.)); +#169307 = PLANE('',#169308); +#169308 = AXIS2_PLACEMENT_3D('',#169309,#169310,#169311); +#169309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169310 = DIRECTION('',(0.,0.,1.)); +#169311 = DIRECTION('',(1.,0.,-0.)); +#169312 = SHELL_BASED_SURFACE_MODEL('',(#169313)); +#169313 = OPEN_SHELL('',(#169314)); +#169314 = ADVANCED_FACE('',(#169315),#169489,.T.); +#169315 = FACE_BOUND('',#169316,.F.); +#169316 = EDGE_LOOP('',(#169317,#169328,#169336,#169344,#169353,#169361, + #169369,#169377,#169385,#169393,#169402,#169410,#169418,#169426, + #169434,#169442,#169450,#169459,#169467,#169475,#169483)); +#169317 = ORIENTED_EDGE('',*,*,#169318,.T.); +#169318 = EDGE_CURVE('',#169319,#169321,#169323,.T.); +#169319 = VERTEX_POINT('',#169320); +#169320 = CARTESIAN_POINT('',(96.872601,-100.285559,1.585)); +#169321 = VERTEX_POINT('',#169322); +#169322 = CARTESIAN_POINT('',(96.989269,-100.347919,1.585)); +#169323 = CIRCLE('',#169324,7.500000000002E-02); +#169324 = AXIS2_PLACEMENT_3D('',#169325,#169326,#169327); +#169325 = CARTESIAN_POINT('',(96.914269,-100.3479190655,1.585)); +#169326 = DIRECTION('',(0.,0.,-1.)); +#169327 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#169328 = ORIENTED_EDGE('',*,*,#169329,.T.); +#169329 = EDGE_CURVE('',#169321,#169330,#169332,.T.); +#169330 = VERTEX_POINT('',#169331); +#169331 = CARTESIAN_POINT('',(96.989269,-100.606252,1.585)); +#169332 = LINE('',#169333,#169334); +#169333 = CARTESIAN_POINT('',(96.989269,-100.347919,1.585)); +#169334 = VECTOR('',#169335,1.); +#169335 = DIRECTION('',(0.,-1.,0.)); +#169336 = ORIENTED_EDGE('',*,*,#169337,.T.); +#169337 = EDGE_CURVE('',#169330,#169338,#169340,.T.); +#169338 = VERTEX_POINT('',#169339); +#169339 = CARTESIAN_POINT('',(97.166996,-100.607693,1.585)); +#169340 = LINE('',#169341,#169342); +#169341 = CARTESIAN_POINT('',(96.989269,-100.606252,1.585)); +#169342 = VECTOR('',#169343,1.); +#169343 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#169344 = ORIENTED_EDGE('',*,*,#169345,.T.); +#169345 = EDGE_CURVE('',#169338,#169346,#169348,.T.); +#169346 = VERTEX_POINT('',#169347); +#169347 = CARTESIAN_POINT('',(97.152364,-100.756252,1.585)); +#169348 = CIRCLE('',#169349,7.500006711463E-02); +#169349 = AXIS2_PLACEMENT_3D('',#169350,#169351,#169352); +#169350 = CARTESIAN_POINT('',(97.152364067115,-100.6812519328,1.585)); +#169351 = DIRECTION('',(0.,0.,-1.)); +#169352 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169353 = ORIENTED_EDGE('',*,*,#169354,.T.); +#169354 = EDGE_CURVE('',#169346,#169355,#169357,.T.); +#169355 = VERTEX_POINT('',#169356); +#169356 = CARTESIAN_POINT('',(96.989269,-100.756252,1.585)); +#169357 = LINE('',#169358,#169359); +#169358 = CARTESIAN_POINT('',(97.152364,-100.756252,1.585)); +#169359 = VECTOR('',#169360,1.); +#169360 = DIRECTION('',(-1.,0.,0.)); +#169361 = ORIENTED_EDGE('',*,*,#169362,.T.); +#169362 = EDGE_CURVE('',#169355,#169363,#169365,.T.); +#169363 = VERTEX_POINT('',#169364); +#169364 = CARTESIAN_POINT('',(96.989269,-101.187356,1.585)); +#169365 = LINE('',#169366,#169367); +#169366 = CARTESIAN_POINT('',(96.989269,-100.756252,1.585)); +#169367 = VECTOR('',#169368,1.); +#169368 = DIRECTION('',(0.,-1.,0.)); +#169369 = ORIENTED_EDGE('',*,*,#169370,.T.); +#169370 = EDGE_CURVE('',#169363,#169371,#169373,.T.); +#169371 = VERTEX_POINT('',#169372); +#169372 = CARTESIAN_POINT('',(97.017789,-101.244398,1.585)); +#169373 = LINE('',#169374,#169375); +#169374 = CARTESIAN_POINT('',(96.989269,-101.187356,1.585)); +#169375 = VECTOR('',#169376,1.); +#169376 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#169377 = ORIENTED_EDGE('',*,*,#169378,.T.); +#169378 = EDGE_CURVE('',#169371,#169379,#169381,.T.); +#169379 = VERTEX_POINT('',#169380); +#169380 = CARTESIAN_POINT('',(97.074831,-101.272919,1.585)); +#169381 = LINE('',#169382,#169383); +#169382 = CARTESIAN_POINT('',(97.017789,-101.244398,1.585)); +#169383 = VECTOR('',#169384,1.); +#169384 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#169385 = ORIENTED_EDGE('',*,*,#169386,.T.); +#169386 = EDGE_CURVE('',#169379,#169387,#169389,.T.); +#169387 = VERTEX_POINT('',#169388); +#169388 = CARTESIAN_POINT('',(97.166996,-101.27436,1.585)); +#169389 = LINE('',#169390,#169391); +#169390 = CARTESIAN_POINT('',(97.074831,-101.272919,1.585)); +#169391 = VECTOR('',#169392,1.); +#169392 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#169393 = ORIENTED_EDGE('',*,*,#169394,.T.); +#169394 = EDGE_CURVE('',#169387,#169395,#169397,.T.); +#169395 = VERTEX_POINT('',#169396); +#169396 = CARTESIAN_POINT('',(97.152364,-101.422919,1.585)); +#169397 = CIRCLE('',#169398,7.500006711464E-02); +#169398 = AXIS2_PLACEMENT_3D('',#169399,#169400,#169401); +#169399 = CARTESIAN_POINT('',(97.152364067115,-101.3479189328,1.585)); +#169400 = DIRECTION('',(0.,0.,-1.)); +#169401 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169402 = ORIENTED_EDGE('',*,*,#169403,.T.); +#169403 = EDGE_CURVE('',#169395,#169404,#169406,.T.); +#169404 = VERTEX_POINT('',#169405); +#169405 = CARTESIAN_POINT('',(97.037316,-101.420256,1.585)); +#169406 = LINE('',#169407,#169408); +#169407 = CARTESIAN_POINT('',(97.152364,-101.422919,1.585)); +#169408 = VECTOR('',#169409,1.); +#169409 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#169410 = ORIENTED_EDGE('',*,*,#169411,.T.); +#169411 = EDGE_CURVE('',#169404,#169412,#169414,.T.); +#169412 = VERTEX_POINT('',#169413); +#169413 = CARTESIAN_POINT('',(96.915904,-101.35955,1.585)); +#169414 = LINE('',#169415,#169416); +#169415 = CARTESIAN_POINT('',(97.037316,-101.420256,1.585)); +#169416 = VECTOR('',#169417,1.); +#169417 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#169418 = ORIENTED_EDGE('',*,*,#169419,.T.); +#169419 = EDGE_CURVE('',#169412,#169420,#169422,.T.); +#169420 = VERTEX_POINT('',#169421); +#169421 = CARTESIAN_POINT('',(96.894806,-101.333841,1.585)); +#169422 = LINE('',#169423,#169424); +#169423 = CARTESIAN_POINT('',(96.915904,-101.35955,1.585)); +#169424 = VECTOR('',#169425,1.); +#169425 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#169426 = ORIENTED_EDGE('',*,*,#169427,.T.); +#169427 = EDGE_CURVE('',#169420,#169428,#169430,.T.); +#169428 = VERTEX_POINT('',#169429); +#169429 = CARTESIAN_POINT('',(96.84071,-101.219693,1.585)); +#169430 = LINE('',#169431,#169432); +#169431 = CARTESIAN_POINT('',(96.894806,-101.333841,1.585)); +#169432 = VECTOR('',#169433,1.); +#169433 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#169434 = ORIENTED_EDGE('',*,*,#169435,.T.); +#169435 = EDGE_CURVE('',#169428,#169436,#169438,.T.); +#169436 = VERTEX_POINT('',#169437); +#169437 = CARTESIAN_POINT('',(96.839269,-100.756252,1.585)); +#169438 = LINE('',#169439,#169440); +#169439 = CARTESIAN_POINT('',(96.84071,-101.219693,1.585)); +#169440 = VECTOR('',#169441,1.); +#169441 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#169442 = ORIENTED_EDGE('',*,*,#169443,.T.); +#169443 = EDGE_CURVE('',#169436,#169444,#169446,.T.); +#169444 = VERTEX_POINT('',#169445); +#169445 = CARTESIAN_POINT('',(96.75678,-100.754811,1.585)); +#169446 = LINE('',#169447,#169448); +#169447 = CARTESIAN_POINT('',(96.839269,-100.756252,1.585)); +#169448 = VECTOR('',#169449,1.); +#169449 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#169450 = ORIENTED_EDGE('',*,*,#169451,.T.); +#169451 = EDGE_CURVE('',#169444,#169452,#169454,.T.); +#169452 = VERTEX_POINT('',#169453); +#169453 = CARTESIAN_POINT('',(96.771412,-100.606252,1.585)); +#169454 = CIRCLE('',#169455,7.500006711464E-02); +#169455 = AXIS2_PLACEMENT_3D('',#169456,#169457,#169458); +#169456 = CARTESIAN_POINT('',(96.771411932885,-100.6812520671,1.585)); +#169457 = DIRECTION('',(0.,0.,-1.)); +#169458 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#169459 = ORIENTED_EDGE('',*,*,#169460,.T.); +#169460 = EDGE_CURVE('',#169452,#169461,#169463,.T.); +#169461 = VERTEX_POINT('',#169462); +#169462 = CARTESIAN_POINT('',(96.839269,-100.606252,1.585)); +#169463 = LINE('',#169464,#169465); +#169464 = CARTESIAN_POINT('',(96.771412,-100.606252,1.585)); +#169465 = VECTOR('',#169466,1.); +#169466 = DIRECTION('',(1.,0.,0.)); +#169467 = ORIENTED_EDGE('',*,*,#169468,.T.); +#169468 = EDGE_CURVE('',#169461,#169469,#169471,.T.); +#169469 = VERTEX_POINT('',#169470); +#169470 = CARTESIAN_POINT('',(96.84071,-100.333287,1.585)); +#169471 = LINE('',#169472,#169473); +#169472 = CARTESIAN_POINT('',(96.839269,-100.606252,1.585)); +#169473 = VECTOR('',#169474,1.); +#169474 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#169475 = ORIENTED_EDGE('',*,*,#169476,.T.); +#169476 = EDGE_CURVE('',#169469,#169477,#169479,.T.); +#169477 = VERTEX_POINT('',#169478); +#169478 = CARTESIAN_POINT('',(96.851909,-100.306251,1.585)); +#169479 = LINE('',#169480,#169481); +#169480 = CARTESIAN_POINT('',(96.84071,-100.333287,1.585)); +#169481 = VECTOR('',#169482,1.); +#169482 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169483 = ORIENTED_EDGE('',*,*,#169484,.T.); +#169484 = EDGE_CURVE('',#169477,#169319,#169485,.T.); +#169485 = LINE('',#169486,#169487); +#169486 = CARTESIAN_POINT('',(96.851909,-100.306251,1.585)); +#169487 = VECTOR('',#169488,1.); +#169488 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#169489 = PLANE('',#169490); +#169490 = AXIS2_PLACEMENT_3D('',#169491,#169492,#169493); +#169491 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169492 = DIRECTION('',(0.,0.,1.)); +#169493 = DIRECTION('',(1.,0.,-0.)); +#169494 = SHELL_BASED_SURFACE_MODEL('',(#169495)); +#169495 = OPEN_SHELL('',(#169496)); +#169496 = ADVANCED_FACE('',(#169497),#169671,.T.); +#169497 = FACE_BOUND('',#169498,.F.); +#169498 = EDGE_LOOP('',(#169499,#169510,#169518,#169526,#169535,#169543, + #169551,#169559,#169567,#169575,#169584,#169592,#169600,#169608, + #169616,#169624,#169632,#169641,#169649,#169657,#169665)); +#169499 = ORIENTED_EDGE('',*,*,#169500,.T.); +#169500 = EDGE_CURVE('',#169501,#169503,#169505,.T.); +#169501 = VERTEX_POINT('',#169502); +#169502 = CARTESIAN_POINT('',(100.824982,-100.285559,1.585)); +#169503 = VERTEX_POINT('',#169504); +#169504 = CARTESIAN_POINT('',(100.94165,-100.347919,1.585)); +#169505 = CIRCLE('',#169506,7.500000000003E-02); +#169506 = AXIS2_PLACEMENT_3D('',#169507,#169508,#169509); +#169507 = CARTESIAN_POINT('',(100.86665,-100.3479190655,1.585)); +#169508 = DIRECTION('',(0.,0.,-1.)); +#169509 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#169510 = ORIENTED_EDGE('',*,*,#169511,.T.); +#169511 = EDGE_CURVE('',#169503,#169512,#169514,.T.); +#169512 = VERTEX_POINT('',#169513); +#169513 = CARTESIAN_POINT('',(100.94165,-100.606252,1.585)); +#169514 = LINE('',#169515,#169516); +#169515 = CARTESIAN_POINT('',(100.94165,-100.347919,1.585)); +#169516 = VECTOR('',#169517,1.); +#169517 = DIRECTION('',(0.,-1.,0.)); +#169518 = ORIENTED_EDGE('',*,*,#169519,.T.); +#169519 = EDGE_CURVE('',#169512,#169520,#169522,.T.); +#169520 = VERTEX_POINT('',#169521); +#169521 = CARTESIAN_POINT('',(101.119377,-100.607693,1.585)); +#169522 = LINE('',#169523,#169524); +#169523 = CARTESIAN_POINT('',(100.94165,-100.606252,1.585)); +#169524 = VECTOR('',#169525,1.); +#169525 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#169526 = ORIENTED_EDGE('',*,*,#169527,.T.); +#169527 = EDGE_CURVE('',#169520,#169528,#169530,.T.); +#169528 = VERTEX_POINT('',#169529); +#169529 = CARTESIAN_POINT('',(101.104745,-100.756252,1.585)); +#169530 = CIRCLE('',#169531,7.500006711463E-02); +#169531 = AXIS2_PLACEMENT_3D('',#169532,#169533,#169534); +#169532 = CARTESIAN_POINT('',(101.10474506711,-100.6812519328,1.585)); +#169533 = DIRECTION('',(0.,0.,-1.)); +#169534 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169535 = ORIENTED_EDGE('',*,*,#169536,.T.); +#169536 = EDGE_CURVE('',#169528,#169537,#169539,.T.); +#169537 = VERTEX_POINT('',#169538); +#169538 = CARTESIAN_POINT('',(100.94165,-100.756252,1.585)); +#169539 = LINE('',#169540,#169541); +#169540 = CARTESIAN_POINT('',(101.104745,-100.756252,1.585)); +#169541 = VECTOR('',#169542,1.); +#169542 = DIRECTION('',(-1.,0.,0.)); +#169543 = ORIENTED_EDGE('',*,*,#169544,.T.); +#169544 = EDGE_CURVE('',#169537,#169545,#169547,.T.); +#169545 = VERTEX_POINT('',#169546); +#169546 = CARTESIAN_POINT('',(100.94165,-101.187356,1.585)); +#169547 = LINE('',#169548,#169549); +#169548 = CARTESIAN_POINT('',(100.94165,-100.756252,1.585)); +#169549 = VECTOR('',#169550,1.); +#169550 = DIRECTION('',(0.,-1.,0.)); +#169551 = ORIENTED_EDGE('',*,*,#169552,.T.); +#169552 = EDGE_CURVE('',#169545,#169553,#169555,.T.); +#169553 = VERTEX_POINT('',#169554); +#169554 = CARTESIAN_POINT('',(100.97017,-101.244398,1.585)); +#169555 = LINE('',#169556,#169557); +#169556 = CARTESIAN_POINT('',(100.94165,-101.187356,1.585)); +#169557 = VECTOR('',#169558,1.); +#169558 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#169559 = ORIENTED_EDGE('',*,*,#169560,.T.); +#169560 = EDGE_CURVE('',#169553,#169561,#169563,.T.); +#169561 = VERTEX_POINT('',#169562); +#169562 = CARTESIAN_POINT('',(101.027212,-101.272919,1.585)); +#169563 = LINE('',#169564,#169565); +#169564 = CARTESIAN_POINT('',(100.97017,-101.244398,1.585)); +#169565 = VECTOR('',#169566,1.); +#169566 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#169567 = ORIENTED_EDGE('',*,*,#169568,.T.); +#169568 = EDGE_CURVE('',#169561,#169569,#169571,.T.); +#169569 = VERTEX_POINT('',#169570); +#169570 = CARTESIAN_POINT('',(101.119377,-101.27436,1.585)); +#169571 = LINE('',#169572,#169573); +#169572 = CARTESIAN_POINT('',(101.027212,-101.272919,1.585)); +#169573 = VECTOR('',#169574,1.); +#169574 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#169575 = ORIENTED_EDGE('',*,*,#169576,.T.); +#169576 = EDGE_CURVE('',#169569,#169577,#169579,.T.); +#169577 = VERTEX_POINT('',#169578); +#169578 = CARTESIAN_POINT('',(101.104745,-101.422919,1.585)); +#169579 = CIRCLE('',#169580,7.500006711464E-02); +#169580 = AXIS2_PLACEMENT_3D('',#169581,#169582,#169583); +#169581 = CARTESIAN_POINT('',(101.10474506711,-101.3479189328,1.585)); +#169582 = DIRECTION('',(0.,0.,-1.)); +#169583 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169584 = ORIENTED_EDGE('',*,*,#169585,.T.); +#169585 = EDGE_CURVE('',#169577,#169586,#169588,.T.); +#169586 = VERTEX_POINT('',#169587); +#169587 = CARTESIAN_POINT('',(100.989697,-101.420256,1.585)); +#169588 = LINE('',#169589,#169590); +#169589 = CARTESIAN_POINT('',(101.104745,-101.422919,1.585)); +#169590 = VECTOR('',#169591,1.); +#169591 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#169592 = ORIENTED_EDGE('',*,*,#169593,.T.); +#169593 = EDGE_CURVE('',#169586,#169594,#169596,.T.); +#169594 = VERTEX_POINT('',#169595); +#169595 = CARTESIAN_POINT('',(100.868285,-101.35955,1.585)); +#169596 = LINE('',#169597,#169598); +#169597 = CARTESIAN_POINT('',(100.989697,-101.420256,1.585)); +#169598 = VECTOR('',#169599,1.); +#169599 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#169600 = ORIENTED_EDGE('',*,*,#169601,.T.); +#169601 = EDGE_CURVE('',#169594,#169602,#169604,.T.); +#169602 = VERTEX_POINT('',#169603); +#169603 = CARTESIAN_POINT('',(100.847187,-101.333841,1.585)); +#169604 = LINE('',#169605,#169606); +#169605 = CARTESIAN_POINT('',(100.868285,-101.35955,1.585)); +#169606 = VECTOR('',#169607,1.); +#169607 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#169608 = ORIENTED_EDGE('',*,*,#169609,.T.); +#169609 = EDGE_CURVE('',#169602,#169610,#169612,.T.); +#169610 = VERTEX_POINT('',#169611); +#169611 = CARTESIAN_POINT('',(100.793091,-101.219693,1.585)); +#169612 = LINE('',#169613,#169614); +#169613 = CARTESIAN_POINT('',(100.847187,-101.333841,1.585)); +#169614 = VECTOR('',#169615,1.); +#169615 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#169616 = ORIENTED_EDGE('',*,*,#169617,.T.); +#169617 = EDGE_CURVE('',#169610,#169618,#169620,.T.); +#169618 = VERTEX_POINT('',#169619); +#169619 = CARTESIAN_POINT('',(100.79165,-100.756252,1.585)); +#169620 = LINE('',#169621,#169622); +#169621 = CARTESIAN_POINT('',(100.793091,-101.219693,1.585)); +#169622 = VECTOR('',#169623,1.); +#169623 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#169624 = ORIENTED_EDGE('',*,*,#169625,.T.); +#169625 = EDGE_CURVE('',#169618,#169626,#169628,.T.); +#169626 = VERTEX_POINT('',#169627); +#169627 = CARTESIAN_POINT('',(100.709161,-100.754811,1.585)); +#169628 = LINE('',#169629,#169630); +#169629 = CARTESIAN_POINT('',(100.79165,-100.756252,1.585)); +#169630 = VECTOR('',#169631,1.); +#169631 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#169632 = ORIENTED_EDGE('',*,*,#169633,.T.); +#169633 = EDGE_CURVE('',#169626,#169634,#169636,.T.); +#169634 = VERTEX_POINT('',#169635); +#169635 = CARTESIAN_POINT('',(100.723793,-100.606252,1.585)); +#169636 = CIRCLE('',#169637,7.500006711464E-02); +#169637 = AXIS2_PLACEMENT_3D('',#169638,#169639,#169640); +#169638 = CARTESIAN_POINT('',(100.72379293288,-100.6812520671,1.585)); +#169639 = DIRECTION('',(0.,0.,-1.)); +#169640 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#169641 = ORIENTED_EDGE('',*,*,#169642,.T.); +#169642 = EDGE_CURVE('',#169634,#169643,#169645,.T.); +#169643 = VERTEX_POINT('',#169644); +#169644 = CARTESIAN_POINT('',(100.79165,-100.606252,1.585)); +#169645 = LINE('',#169646,#169647); +#169646 = CARTESIAN_POINT('',(100.723793,-100.606252,1.585)); +#169647 = VECTOR('',#169648,1.); +#169648 = DIRECTION('',(1.,0.,0.)); +#169649 = ORIENTED_EDGE('',*,*,#169650,.T.); +#169650 = EDGE_CURVE('',#169643,#169651,#169653,.T.); +#169651 = VERTEX_POINT('',#169652); +#169652 = CARTESIAN_POINT('',(100.793091,-100.333287,1.585)); +#169653 = LINE('',#169654,#169655); +#169654 = CARTESIAN_POINT('',(100.79165,-100.606252,1.585)); +#169655 = VECTOR('',#169656,1.); +#169656 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#169657 = ORIENTED_EDGE('',*,*,#169658,.T.); +#169658 = EDGE_CURVE('',#169651,#169659,#169661,.T.); +#169659 = VERTEX_POINT('',#169660); +#169660 = CARTESIAN_POINT('',(100.80429,-100.306251,1.585)); +#169661 = LINE('',#169662,#169663); +#169662 = CARTESIAN_POINT('',(100.793091,-100.333287,1.585)); +#169663 = VECTOR('',#169664,1.); +#169664 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#169665 = ORIENTED_EDGE('',*,*,#169666,.T.); +#169666 = EDGE_CURVE('',#169659,#169501,#169667,.T.); +#169667 = LINE('',#169668,#169669); +#169668 = CARTESIAN_POINT('',(100.80429,-100.306251,1.585)); +#169669 = VECTOR('',#169670,1.); +#169670 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#169671 = PLANE('',#169672); +#169672 = AXIS2_PLACEMENT_3D('',#169673,#169674,#169675); +#169673 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169674 = DIRECTION('',(0.,0.,1.)); +#169675 = DIRECTION('',(1.,0.,-0.)); +#169676 = SHELL_BASED_SURFACE_MODEL('',(#169677)); +#169677 = OPEN_SHELL('',(#169678)); +#169678 = ADVANCED_FACE('',(#169679),#169813,.T.); +#169679 = FACE_BOUND('',#169680,.F.); +#169680 = EDGE_LOOP('',(#169681,#169691,#169699,#169708,#169716,#169724, + #169733,#169741,#169750,#169758,#169766,#169774,#169782,#169791, + #169799,#169807)); +#169681 = ORIENTED_EDGE('',*,*,#169682,.T.); +#169682 = EDGE_CURVE('',#169683,#169685,#169687,.T.); +#169683 = VERTEX_POINT('',#169684); +#169684 = CARTESIAN_POINT('',(105.789752,-100.294941,1.585)); +#169685 = VERTEX_POINT('',#169686); +#169686 = CARTESIAN_POINT('',(105.828208,-100.27436,1.585)); +#169687 = LINE('',#169688,#169689); +#169688 = CARTESIAN_POINT('',(105.789752,-100.294941,1.585)); +#169689 = VECTOR('',#169690,1.); +#169690 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#169691 = ORIENTED_EDGE('',*,*,#169692,.T.); +#169692 = EDGE_CURVE('',#169685,#169693,#169695,.T.); +#169693 = VERTEX_POINT('',#169694); +#169694 = CARTESIAN_POINT('',(105.850045,-100.27436,1.585)); +#169695 = LINE('',#169696,#169697); +#169696 = CARTESIAN_POINT('',(105.828208,-100.27436,1.585)); +#169697 = VECTOR('',#169698,1.); +#169698 = DIRECTION('',(1.,0.,0.)); +#169699 = ORIENTED_EDGE('',*,*,#169700,.T.); +#169700 = EDGE_CURVE('',#169693,#169701,#169703,.T.); +#169701 = VERTEX_POINT('',#169702); +#169702 = CARTESIAN_POINT('',(105.91784,-100.347919,1.585)); +#169703 = CIRCLE('',#169704,7.216898094229E-02); +#169704 = AXIS2_PLACEMENT_3D('',#169705,#169706,#169707); +#169705 = CARTESIAN_POINT('',(105.84568706389,-100.3463972834,1.585)); +#169706 = DIRECTION('',(0.,0.,-1.)); +#169707 = DIRECTION('',(6.038516895263E-02,0.998175150648,0.)); +#169708 = ORIENTED_EDGE('',*,*,#169709,.T.); +#169709 = EDGE_CURVE('',#169701,#169710,#169712,.T.); +#169710 = VERTEX_POINT('',#169711); +#169711 = CARTESIAN_POINT('',(105.91784,-101.272919,1.585)); +#169712 = LINE('',#169713,#169714); +#169713 = CARTESIAN_POINT('',(105.91784,-100.347919,1.585)); +#169714 = VECTOR('',#169715,1.); +#169715 = DIRECTION('',(0.,-1.,0.)); +#169716 = ORIENTED_EDGE('',*,*,#169717,.T.); +#169717 = EDGE_CURVE('',#169710,#169718,#169720,.T.); +#169718 = VERTEX_POINT('',#169719); +#169719 = CARTESIAN_POINT('',(106.143186,-101.27436,1.585)); +#169720 = LINE('',#169721,#169722); +#169721 = CARTESIAN_POINT('',(105.91784,-101.272919,1.585)); +#169722 = VECTOR('',#169723,1.); +#169723 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#169724 = ORIENTED_EDGE('',*,*,#169725,.T.); +#169725 = EDGE_CURVE('',#169718,#169726,#169728,.T.); +#169726 = VERTEX_POINT('',#169727); +#169727 = CARTESIAN_POINT('',(106.128554,-101.422919,1.585)); +#169728 = CIRCLE('',#169729,7.500006711464E-02); +#169729 = AXIS2_PLACEMENT_3D('',#169730,#169731,#169732); +#169730 = CARTESIAN_POINT('',(106.12855406711,-101.3479189328,1.585)); +#169731 = DIRECTION('',(0.,0.,-1.)); +#169732 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169733 = ORIENTED_EDGE('',*,*,#169734,.T.); +#169734 = EDGE_CURVE('',#169726,#169735,#169737,.T.); +#169735 = VERTEX_POINT('',#169736); +#169736 = CARTESIAN_POINT('',(105.542494,-101.421478,1.585)); +#169737 = LINE('',#169738,#169739); +#169738 = CARTESIAN_POINT('',(106.128554,-101.422919,1.585)); +#169739 = VECTOR('',#169740,1.); +#169740 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#169741 = ORIENTED_EDGE('',*,*,#169742,.T.); +#169742 = EDGE_CURVE('',#169735,#169743,#169745,.T.); +#169743 = VERTEX_POINT('',#169744); +#169744 = CARTESIAN_POINT('',(105.557126,-101.272919,1.585)); +#169745 = CIRCLE('',#169746,7.500006711463E-02); +#169746 = AXIS2_PLACEMENT_3D('',#169747,#169748,#169749); +#169747 = CARTESIAN_POINT('',(105.55712593288,-101.3479190671,1.585)); +#169748 = DIRECTION('',(0.,0.,-1.)); +#169749 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#169750 = ORIENTED_EDGE('',*,*,#169751,.T.); +#169751 = EDGE_CURVE('',#169743,#169752,#169754,.T.); +#169752 = VERTEX_POINT('',#169753); +#169753 = CARTESIAN_POINT('',(105.76784,-101.272919,1.585)); +#169754 = LINE('',#169755,#169756); +#169755 = CARTESIAN_POINT('',(105.557126,-101.272919,1.585)); +#169756 = VECTOR('',#169757,1.); +#169757 = DIRECTION('',(1.,0.,0.)); +#169758 = ORIENTED_EDGE('',*,*,#169759,.T.); +#169759 = EDGE_CURVE('',#169752,#169760,#169762,.T.); +#169760 = VERTEX_POINT('',#169761); +#169761 = CARTESIAN_POINT('',(105.76784,-100.576604,1.585)); +#169762 = LINE('',#169763,#169764); +#169763 = CARTESIAN_POINT('',(105.76784,-101.272919,1.585)); +#169764 = VECTOR('',#169765,1.); +#169765 = DIRECTION('',(0.,1.,0.)); +#169766 = ORIENTED_EDGE('',*,*,#169767,.T.); +#169767 = EDGE_CURVE('',#169760,#169768,#169770,.T.); +#169768 = VERTEX_POINT('',#169769); +#169769 = CARTESIAN_POINT('',(105.692204,-100.649131,1.585)); +#169770 = LINE('',#169771,#169772); +#169771 = CARTESIAN_POINT('',(105.76784,-100.576604,1.585)); +#169772 = VECTOR('',#169773,1.); +#169773 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#169774 = ORIENTED_EDGE('',*,*,#169775,.T.); +#169775 = EDGE_CURVE('',#169768,#169776,#169778,.T.); +#169776 = VERTEX_POINT('',#169777); +#169777 = CARTESIAN_POINT('',(105.576935,-100.70597,1.585)); +#169778 = LINE('',#169779,#169780); +#169779 = CARTESIAN_POINT('',(105.692204,-100.649131,1.585)); +#169780 = VECTOR('',#169781,1.); +#169781 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#169782 = ORIENTED_EDGE('',*,*,#169783,.T.); +#169783 = EDGE_CURVE('',#169776,#169784,#169786,.T.); +#169784 = VERTEX_POINT('',#169785); +#169785 = CARTESIAN_POINT('',(105.523585,-100.566551,1.585)); +#169786 = CIRCLE('',#169787,7.500005272361E-02); +#169787 = AXIS2_PLACEMENT_3D('',#169788,#169789,#169790); +#169788 = CARTESIAN_POINT('',(105.55712555676,-100.6336333297,1.585)); +#169789 = DIRECTION('',(0.,0.,-1.)); +#169790 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#169791 = ORIENTED_EDGE('',*,*,#169792,.T.); +#169792 = EDGE_CURVE('',#169784,#169793,#169795,.T.); +#169793 = VERTEX_POINT('',#169794); +#169794 = CARTESIAN_POINT('',(105.607937,-100.524375,1.585)); +#169795 = LINE('',#169796,#169797); +#169796 = CARTESIAN_POINT('',(105.523585,-100.566551,1.585)); +#169797 = VECTOR('',#169798,1.); +#169798 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#169799 = ORIENTED_EDGE('',*,*,#169800,.T.); +#169800 = EDGE_CURVE('',#169793,#169801,#169803,.T.); +#169801 = VERTEX_POINT('',#169802); +#169802 = CARTESIAN_POINT('',(105.689316,-100.442996,1.585)); +#169803 = LINE('',#169804,#169805); +#169804 = CARTESIAN_POINT('',(105.607937,-100.524375,1.585)); +#169805 = VECTOR('',#169806,1.); +#169806 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#169807 = ORIENTED_EDGE('',*,*,#169808,.T.); +#169808 = EDGE_CURVE('',#169801,#169683,#169809,.T.); +#169809 = LINE('',#169810,#169811); +#169810 = CARTESIAN_POINT('',(105.689316,-100.442996,1.585)); +#169811 = VECTOR('',#169812,1.); +#169812 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#169813 = PLANE('',#169814); +#169814 = AXIS2_PLACEMENT_3D('',#169815,#169816,#169817); +#169815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169816 = DIRECTION('',(0.,0.,1.)); +#169817 = DIRECTION('',(1.,0.,-0.)); +#169818 = SHELL_BASED_SURFACE_MODEL('',(#169819)); +#169819 = OPEN_SHELL('',(#169820)); +#169820 = ADVANCED_FACE('',(#169821),#169980,.T.); +#169821 = FACE_BOUND('',#169822,.F.); +#169822 = EDGE_LOOP('',(#169823,#169834,#169842,#169850,#169858,#169866, + #169874,#169882,#169891,#169899,#169908,#169916,#169924,#169932, + #169941,#169949,#169957,#169965,#169974)); +#169823 = ORIENTED_EDGE('',*,*,#169824,.T.); +#169824 = EDGE_CURVE('',#169825,#169827,#169829,.T.); +#169825 = VERTEX_POINT('',#169826); +#169826 = CARTESIAN_POINT('',(109.071204,-100.328456,1.585)); +#169827 = VERTEX_POINT('',#169828); +#169828 = CARTESIAN_POINT('',(109.580599,-100.337786,1.585)); +#169829 = CIRCLE('',#169830,0.450326844012); +#169830 = AXIS2_PLACEMENT_3D('',#169831,#169832,#169833); +#169831 = CARTESIAN_POINT('',(109.3191010301,-100.7044098919,1.585)); +#169832 = DIRECTION('',(0.,0.,-1.)); +#169833 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#169834 = ORIENTED_EDGE('',*,*,#169835,.T.); +#169835 = EDGE_CURVE('',#169827,#169836,#169838,.T.); +#169836 = VERTEX_POINT('',#169837); +#169837 = CARTESIAN_POINT('',(109.644052,-100.403316,1.585)); +#169838 = LINE('',#169839,#169840); +#169839 = CARTESIAN_POINT('',(109.580599,-100.337786,1.585)); +#169840 = VECTOR('',#169841,1.); +#169841 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#169842 = ORIENTED_EDGE('',*,*,#169843,.T.); +#169843 = EDGE_CURVE('',#169836,#169844,#169846,.T.); +#169844 = VERTEX_POINT('',#169845); +#169845 = CARTESIAN_POINT('',(109.702113,-100.523763,1.585)); +#169846 = LINE('',#169847,#169848); +#169847 = CARTESIAN_POINT('',(109.644052,-100.403316,1.585)); +#169848 = VECTOR('',#169849,1.); +#169849 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#169850 = ORIENTED_EDGE('',*,*,#169851,.T.); +#169851 = EDGE_CURVE('',#169844,#169852,#169854,.T.); +#169852 = VERTEX_POINT('',#169853); +#169853 = CARTESIAN_POINT('',(109.701354,-100.650095,1.585)); +#169854 = LINE('',#169855,#169856); +#169855 = CARTESIAN_POINT('',(109.702113,-100.523763,1.585)); +#169856 = VECTOR('',#169857,1.); +#169857 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#169858 = ORIENTED_EDGE('',*,*,#169859,.T.); +#169859 = EDGE_CURVE('',#169852,#169860,#169862,.T.); +#169860 = VERTEX_POINT('',#169861); +#169861 = CARTESIAN_POINT('',(109.643296,-100.818158,1.585)); +#169862 = LINE('',#169863,#169864); +#169863 = CARTESIAN_POINT('',(109.701354,-100.650095,1.585)); +#169864 = VECTOR('',#169865,1.); +#169865 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#169866 = ORIENTED_EDGE('',*,*,#169867,.T.); +#169867 = EDGE_CURVE('',#169860,#169868,#169870,.T.); +#169868 = VERTEX_POINT('',#169869); +#169869 = CARTESIAN_POINT('',(109.190573,-101.272919,1.585)); +#169870 = LINE('',#169871,#169872); +#169871 = CARTESIAN_POINT('',(109.643296,-100.818158,1.585)); +#169872 = VECTOR('',#169873,1.); +#169873 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#169874 = ORIENTED_EDGE('',*,*,#169875,.T.); +#169875 = EDGE_CURVE('',#169868,#169876,#169878,.T.); +#169876 = VERTEX_POINT('',#169877); +#169877 = CARTESIAN_POINT('',(109.643186,-101.27436,1.585)); +#169878 = LINE('',#169879,#169880); +#169879 = CARTESIAN_POINT('',(109.190573,-101.272919,1.585)); +#169880 = VECTOR('',#169881,1.); +#169881 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#169882 = ORIENTED_EDGE('',*,*,#169883,.T.); +#169883 = EDGE_CURVE('',#169876,#169884,#169886,.T.); +#169884 = VERTEX_POINT('',#169885); +#169885 = CARTESIAN_POINT('',(109.628554,-101.422919,1.585)); +#169886 = CIRCLE('',#169887,7.500006711464E-02); +#169887 = AXIS2_PLACEMENT_3D('',#169888,#169889,#169890); +#169888 = CARTESIAN_POINT('',(109.62855406711,-101.3479189328,1.585)); +#169889 = DIRECTION('',(0.,0.,-1.)); +#169890 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#169891 = ORIENTED_EDGE('',*,*,#169892,.T.); +#169892 = EDGE_CURVE('',#169884,#169893,#169895,.T.); +#169893 = VERTEX_POINT('',#169894); +#169894 = CARTESIAN_POINT('',(108.994875,-101.421478,1.585)); +#169895 = LINE('',#169896,#169897); +#169896 = CARTESIAN_POINT('',(109.628554,-101.422919,1.585)); +#169897 = VECTOR('',#169898,1.); +#169898 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#169899 = ORIENTED_EDGE('',*,*,#169900,.T.); +#169900 = EDGE_CURVE('',#169893,#169901,#169903,.T.); +#169901 = VERTEX_POINT('',#169902); +#169902 = CARTESIAN_POINT('',(108.956474,-101.294886,1.585)); +#169903 = CIRCLE('',#169904,7.500021013109E-02); +#169904 = AXIS2_PLACEMENT_3D('',#169905,#169906,#169907); +#169905 = CARTESIAN_POINT('',(109.0095073167,-101.3479189976,1.585)); +#169906 = DIRECTION('',(0.,0.,-1.)); +#169907 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#169908 = ORIENTED_EDGE('',*,*,#169909,.T.); +#169909 = EDGE_CURVE('',#169901,#169910,#169912,.T.); +#169910 = VERTEX_POINT('',#169911); +#169911 = CARTESIAN_POINT('',(109.515382,-100.735976,1.585)); +#169912 = LINE('',#169913,#169914); +#169913 = CARTESIAN_POINT('',(108.956474,-101.294886,1.585)); +#169914 = VECTOR('',#169915,1.); +#169915 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#169916 = ORIENTED_EDGE('',*,*,#169917,.T.); +#169917 = EDGE_CURVE('',#169910,#169918,#169920,.T.); +#169918 = VERTEX_POINT('',#169919); +#169919 = CARTESIAN_POINT('',(109.553554,-100.621463,1.585)); +#169920 = LINE('',#169921,#169922); +#169921 = CARTESIAN_POINT('',(109.515382,-100.735976,1.585)); +#169922 = VECTOR('',#169923,1.); +#169923 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#169924 = ORIENTED_EDGE('',*,*,#169925,.T.); +#169925 = EDGE_CURVE('',#169918,#169926,#169928,.T.); +#169926 = VERTEX_POINT('',#169927); +#169927 = CARTESIAN_POINT('',(109.553554,-100.5561,1.585)); +#169928 = LINE('',#169929,#169930); +#169929 = CARTESIAN_POINT('',(109.553554,-100.621463,1.585)); +#169930 = VECTOR('',#169931,1.); +#169931 = DIRECTION('',(0.,1.,0.)); +#169932 = ORIENTED_EDGE('',*,*,#169933,.T.); +#169933 = EDGE_CURVE('',#169926,#169934,#169936,.T.); +#169934 = VERTEX_POINT('',#169935); +#169935 = CARTESIAN_POINT('',(109.420373,-100.422919,1.585)); +#169936 = CIRCLE('',#169937,0.18686440374); +#169937 = AXIS2_PLACEMENT_3D('',#169938,#169939,#169940); +#169938 = CARTESIAN_POINT('',(109.372837,-100.603636,1.585)); +#169939 = DIRECTION('',(0.,0.,1.)); +#169940 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#169941 = ORIENTED_EDGE('',*,*,#169942,.T.); +#169942 = EDGE_CURVE('',#169934,#169943,#169945,.T.); +#169943 = VERTEX_POINT('',#169944); +#169944 = CARTESIAN_POINT('',(109.217688,-100.422919,1.585)); +#169945 = LINE('',#169946,#169947); +#169946 = CARTESIAN_POINT('',(109.420373,-100.422919,1.585)); +#169947 = VECTOR('',#169948,1.); +#169948 = DIRECTION('',(-1.,0.,0.)); +#169949 = ORIENTED_EDGE('',*,*,#169950,.T.); +#169950 = EDGE_CURVE('',#169943,#169951,#169953,.T.); +#169951 = VERTEX_POINT('',#169952); +#169952 = CARTESIAN_POINT('',(109.149172,-100.457177,1.585)); +#169953 = LINE('',#169954,#169955); +#169954 = CARTESIAN_POINT('',(109.217688,-100.422919,1.585)); +#169955 = VECTOR('',#169956,1.); +#169956 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#169957 = ORIENTED_EDGE('',*,*,#169958,.T.); +#169958 = EDGE_CURVE('',#169951,#169959,#169961,.T.); +#169959 = VERTEX_POINT('',#169960); +#169960 = CARTESIAN_POINT('',(109.098794,-100.505517,1.585)); +#169961 = LINE('',#169962,#169963); +#169962 = CARTESIAN_POINT('',(109.149172,-100.457177,1.585)); +#169963 = VECTOR('',#169964,1.); +#169964 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#169965 = ORIENTED_EDGE('',*,*,#169966,.T.); +#169966 = EDGE_CURVE('',#169959,#169967,#169969,.T.); +#169967 = VERTEX_POINT('',#169968); +#169968 = CARTESIAN_POINT('',(109.004093,-100.390124,1.585)); +#169969 = CIRCLE('',#169970,7.499996838527E-02); +#169970 = AXIS2_PLACEMENT_3D('',#169971,#169972,#169973); +#169971 = CARTESIAN_POINT('',(109.057126,-100.4431569724,1.585)); +#169972 = DIRECTION('',(0.,0.,-1.)); +#169973 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#169974 = ORIENTED_EDGE('',*,*,#169975,.T.); +#169975 = EDGE_CURVE('',#169967,#169825,#169976,.T.); +#169976 = LINE('',#169977,#169978); +#169977 = CARTESIAN_POINT('',(109.004093,-100.390124,1.585)); +#169978 = VECTOR('',#169979,1.); +#169979 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#169980 = PLANE('',#169981); +#169981 = AXIS2_PLACEMENT_3D('',#169982,#169983,#169984); +#169982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#169983 = DIRECTION('',(0.,0.,1.)); +#169984 = DIRECTION('',(1.,0.,-0.)); +#169985 = SHELL_BASED_SURFACE_MODEL('',(#169986)); +#169986 = OPEN_SHELL('',(#169987)); +#169987 = ADVANCED_FACE('',(#169988,#170099),#170151,.T.); +#169988 = FACE_BOUND('',#169989,.F.); +#169989 = EDGE_LOOP('',(#169990,#170001,#170009,#170018,#170026,#170035, + #170043,#170051,#170060,#170068,#170076,#170084,#170093)); +#169990 = ORIENTED_EDGE('',*,*,#169991,.T.); +#169991 = EDGE_CURVE('',#169992,#169994,#169996,.T.); +#169992 = VERTEX_POINT('',#169993); +#169993 = CARTESIAN_POINT('',(95.84071,-100.333287,1.585)); +#169994 = VERTEX_POINT('',#169995); +#169995 = CARTESIAN_POINT('',(95.914269,-100.272919,1.585)); +#169996 = CIRCLE('',#169997,7.500074938989E-02); +#169997 = AXIS2_PLACEMENT_3D('',#169998,#169999,#170000); +#169998 = CARTESIAN_POINT('',(95.91426946611,-100.3479197493,1.585)); +#169999 = DIRECTION('',(0.,0.,-1.)); +#170000 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#170001 = ORIENTED_EDGE('',*,*,#170002,.T.); +#170002 = EDGE_CURVE('',#169994,#170003,#170005,.T.); +#170003 = VERTEX_POINT('',#170004); +#170004 = CARTESIAN_POINT('',(96.309853,-100.27436,1.585)); +#170005 = LINE('',#170006,#170007); +#170006 = CARTESIAN_POINT('',(95.914269,-100.272919,1.585)); +#170007 = VECTOR('',#170008,1.); +#170008 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170009 = ORIENTED_EDGE('',*,*,#170010,.T.); +#170010 = EDGE_CURVE('',#170003,#170011,#170013,.T.); +#170011 = VERTEX_POINT('',#170012); +#170012 = CARTESIAN_POINT('',(96.559256,-100.523763,1.585)); +#170013 = CIRCLE('',#170014,0.347870264855); +#170014 = AXIS2_PLACEMENT_3D('',#170015,#170016,#170017); +#170015 = CARTESIAN_POINT('',(96.222525265028,-100.6110907349,1.585)); +#170016 = DIRECTION('',(0.,0.,-1.)); +#170017 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170018 = ORIENTED_EDGE('',*,*,#170019,.T.); +#170019 = EDGE_CURVE('',#170011,#170020,#170022,.T.); +#170020 = VERTEX_POINT('',#170021); +#170021 = CARTESIAN_POINT('',(96.558034,-100.701062,1.585)); +#170022 = LINE('',#170023,#170024); +#170023 = CARTESIAN_POINT('',(96.559256,-100.523763,1.585)); +#170024 = VECTOR('',#170025,1.); +#170025 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#170026 = ORIENTED_EDGE('',*,*,#170027,.T.); +#170027 = EDGE_CURVE('',#170020,#170028,#170030,.T.); +#170028 = VERTEX_POINT('',#170029); +#170029 = CARTESIAN_POINT('',(96.309853,-100.945287,1.585)); +#170030 = CIRCLE('',#170031,0.348632345849); +#170031 = AXIS2_PLACEMENT_3D('',#170032,#170033,#170034); +#170032 = CARTESIAN_POINT('',(96.222084194037,-100.6078834593,1.585)); +#170033 = DIRECTION('',(0.,0.,-1.)); +#170034 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170035 = ORIENTED_EDGE('',*,*,#170036,.T.); +#170036 = EDGE_CURVE('',#170028,#170037,#170039,.T.); +#170037 = VERTEX_POINT('',#170038); +#170038 = CARTESIAN_POINT('',(96.296336,-100.946618,1.585)); +#170039 = LINE('',#170040,#170041); +#170040 = CARTESIAN_POINT('',(96.309853,-100.945287,1.585)); +#170041 = VECTOR('',#170042,1.); +#170042 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170043 = ORIENTED_EDGE('',*,*,#170044,.T.); +#170044 = EDGE_CURVE('',#170037,#170045,#170047,.T.); +#170045 = VERTEX_POINT('',#170046); +#170046 = CARTESIAN_POINT('',(96.55435,-101.317723,1.585)); +#170047 = LINE('',#170048,#170049); +#170048 = CARTESIAN_POINT('',(96.296336,-100.946618,1.585)); +#170049 = VECTOR('',#170050,1.); +#170050 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170051 = ORIENTED_EDGE('',*,*,#170052,.T.); +#170052 = EDGE_CURVE('',#170045,#170053,#170055,.T.); +#170053 = VERTEX_POINT('',#170054); +#170054 = CARTESIAN_POINT('',(96.424255,-101.390929,1.585)); +#170055 = CIRCLE('',#170056,7.500005951702E-02); +#170056 = AXIS2_PLACEMENT_3D('',#170057,#170058,#170059); +#170057 = CARTESIAN_POINT('',(96.485697062942,-101.3479187473,1.585)); +#170058 = DIRECTION('',(0.,0.,-1.)); +#170059 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170060 = ORIENTED_EDGE('',*,*,#170061,.T.); +#170061 = EDGE_CURVE('',#170053,#170062,#170064,.T.); +#170062 = VERTEX_POINT('',#170063); +#170063 = CARTESIAN_POINT('',(96.113315,-100.946728,1.585)); +#170064 = LINE('',#170065,#170066); +#170065 = CARTESIAN_POINT('',(96.424255,-101.390929,1.585)); +#170066 = VECTOR('',#170067,1.); +#170067 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170068 = ORIENTED_EDGE('',*,*,#170069,.T.); +#170069 = EDGE_CURVE('',#170062,#170070,#170072,.T.); +#170070 = VERTEX_POINT('',#170071); +#170071 = CARTESIAN_POINT('',(95.989269,-100.946728,1.585)); +#170072 = LINE('',#170073,#170074); +#170073 = CARTESIAN_POINT('',(96.113315,-100.946728,1.585)); +#170074 = VECTOR('',#170075,1.); +#170075 = DIRECTION('',(-1.,0.,0.)); +#170076 = ORIENTED_EDGE('',*,*,#170077,.T.); +#170077 = EDGE_CURVE('',#170070,#170078,#170080,.T.); +#170078 = VERTEX_POINT('',#170079); +#170079 = CARTESIAN_POINT('',(95.987828,-101.362551,1.585)); +#170080 = LINE('',#170081,#170082); +#170081 = CARTESIAN_POINT('',(95.989269,-100.946728,1.585)); +#170082 = VECTOR('',#170083,1.); +#170083 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170084 = ORIENTED_EDGE('',*,*,#170085,.T.); +#170085 = EDGE_CURVE('',#170078,#170086,#170088,.T.); +#170086 = VERTEX_POINT('',#170087); +#170087 = CARTESIAN_POINT('',(95.839269,-101.347919,1.585)); +#170088 = CIRCLE('',#170089,7.500006711464E-02); +#170089 = AXIS2_PLACEMENT_3D('',#170090,#170091,#170092); +#170090 = CARTESIAN_POINT('',(95.914269067115,-101.3479190671,1.585)); +#170091 = DIRECTION('',(-0.,0.,-1.)); +#170092 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170093 = ORIENTED_EDGE('',*,*,#170094,.T.); +#170094 = EDGE_CURVE('',#170086,#169992,#170095,.T.); +#170095 = LINE('',#170096,#170097); +#170096 = CARTESIAN_POINT('',(95.839269,-101.347919,1.585)); +#170097 = VECTOR('',#170098,1.); +#170098 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170099 = FACE_BOUND('',#170100,.F.); +#170100 = EDGE_LOOP('',(#170101,#170112,#170120,#170128,#170136,#170145) + ); +#170101 = ORIENTED_EDGE('',*,*,#170102,.T.); +#170102 = EDGE_CURVE('',#170103,#170105,#170107,.T.); +#170103 = VERTEX_POINT('',#170104); +#170104 = CARTESIAN_POINT('',(96.410697,-100.5561,1.585)); +#170105 = VERTEX_POINT('',#170106); +#170106 = CARTESIAN_POINT('',(96.277516,-100.422919,1.585)); +#170107 = CIRCLE('',#170108,0.18686440374); +#170108 = AXIS2_PLACEMENT_3D('',#170109,#170110,#170111); +#170109 = CARTESIAN_POINT('',(96.22998,-100.603636,1.585)); +#170110 = DIRECTION('',(0.,0.,1.)); +#170111 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170112 = ORIENTED_EDGE('',*,*,#170113,.T.); +#170113 = EDGE_CURVE('',#170105,#170114,#170116,.T.); +#170114 = VERTEX_POINT('',#170115); +#170115 = CARTESIAN_POINT('',(95.989269,-100.422919,1.585)); +#170116 = LINE('',#170117,#170118); +#170117 = CARTESIAN_POINT('',(96.277516,-100.422919,1.585)); +#170118 = VECTOR('',#170119,1.); +#170119 = DIRECTION('',(-1.,0.,0.)); +#170120 = ORIENTED_EDGE('',*,*,#170121,.T.); +#170121 = EDGE_CURVE('',#170114,#170122,#170124,.T.); +#170122 = VERTEX_POINT('',#170123); +#170123 = CARTESIAN_POINT('',(95.989269,-100.796728,1.585)); +#170124 = LINE('',#170125,#170126); +#170125 = CARTESIAN_POINT('',(95.989269,-100.422919,1.585)); +#170126 = VECTOR('',#170127,1.); +#170127 = DIRECTION('',(0.,-1.,0.)); +#170128 = ORIENTED_EDGE('',*,*,#170129,.T.); +#170129 = EDGE_CURVE('',#170122,#170130,#170132,.T.); +#170130 = VERTEX_POINT('',#170131); +#170131 = CARTESIAN_POINT('',(96.277516,-100.796728,1.585)); +#170132 = LINE('',#170133,#170134); +#170133 = CARTESIAN_POINT('',(95.989269,-100.796728,1.585)); +#170134 = VECTOR('',#170135,1.); +#170135 = DIRECTION('',(1.,0.,0.)); +#170136 = ORIENTED_EDGE('',*,*,#170137,.T.); +#170137 = EDGE_CURVE('',#170130,#170138,#170140,.T.); +#170138 = VERTEX_POINT('',#170139); +#170139 = CARTESIAN_POINT('',(96.410697,-100.663547,1.585)); +#170140 = CIRCLE('',#170141,0.18686440374); +#170141 = AXIS2_PLACEMENT_3D('',#170142,#170143,#170144); +#170142 = CARTESIAN_POINT('',(96.22998,-100.616011,1.585)); +#170143 = DIRECTION('',(0.,0.,1.)); +#170144 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170145 = ORIENTED_EDGE('',*,*,#170146,.T.); +#170146 = EDGE_CURVE('',#170138,#170103,#170147,.T.); +#170147 = LINE('',#170148,#170149); +#170148 = CARTESIAN_POINT('',(96.410697,-100.663547,1.585)); +#170149 = VECTOR('',#170150,1.); +#170150 = DIRECTION('',(0.,1.,0.)); +#170151 = PLANE('',#170152); +#170152 = AXIS2_PLACEMENT_3D('',#170153,#170154,#170155); +#170153 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170154 = DIRECTION('',(0.,0.,1.)); +#170155 = DIRECTION('',(1.,0.,-0.)); +#170156 = SHELL_BASED_SURFACE_MODEL('',(#170157)); +#170157 = OPEN_SHELL('',(#170158)); +#170158 = ADVANCED_FACE('',(#170159,#170270),#170322,.T.); +#170159 = FACE_BOUND('',#170160,.F.); +#170160 = EDGE_LOOP('',(#170161,#170172,#170180,#170189,#170197,#170206, + #170214,#170222,#170231,#170239,#170247,#170255,#170264)); +#170161 = ORIENTED_EDGE('',*,*,#170162,.T.); +#170162 = EDGE_CURVE('',#170163,#170165,#170167,.T.); +#170163 = VERTEX_POINT('',#170164); +#170164 = CARTESIAN_POINT('',(99.793091,-100.333287,1.585)); +#170165 = VERTEX_POINT('',#170166); +#170166 = CARTESIAN_POINT('',(99.86665,-100.272919,1.585)); +#170167 = CIRCLE('',#170168,7.500074938984E-02); +#170168 = AXIS2_PLACEMENT_3D('',#170169,#170170,#170171); +#170169 = CARTESIAN_POINT('',(99.86665046611,-100.3479197493,1.585)); +#170170 = DIRECTION('',(0.,0.,-1.)); +#170171 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170172 = ORIENTED_EDGE('',*,*,#170173,.T.); +#170173 = EDGE_CURVE('',#170165,#170174,#170176,.T.); +#170174 = VERTEX_POINT('',#170175); +#170175 = CARTESIAN_POINT('',(100.262234,-100.27436,1.585)); +#170176 = LINE('',#170177,#170178); +#170177 = CARTESIAN_POINT('',(99.86665,-100.272919,1.585)); +#170178 = VECTOR('',#170179,1.); +#170179 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170180 = ORIENTED_EDGE('',*,*,#170181,.T.); +#170181 = EDGE_CURVE('',#170174,#170182,#170184,.T.); +#170182 = VERTEX_POINT('',#170183); +#170183 = CARTESIAN_POINT('',(100.511637,-100.523763,1.585)); +#170184 = CIRCLE('',#170185,0.347870264855); +#170185 = AXIS2_PLACEMENT_3D('',#170186,#170187,#170188); +#170186 = CARTESIAN_POINT('',(100.17490626502,-100.6110907349,1.585)); +#170187 = DIRECTION('',(0.,0.,-1.)); +#170188 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170189 = ORIENTED_EDGE('',*,*,#170190,.T.); +#170190 = EDGE_CURVE('',#170182,#170191,#170193,.T.); +#170191 = VERTEX_POINT('',#170192); +#170192 = CARTESIAN_POINT('',(100.510415,-100.701062,1.585)); +#170193 = LINE('',#170194,#170195); +#170194 = CARTESIAN_POINT('',(100.511637,-100.523763,1.585)); +#170195 = VECTOR('',#170196,1.); +#170196 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#170197 = ORIENTED_EDGE('',*,*,#170198,.T.); +#170198 = EDGE_CURVE('',#170191,#170199,#170201,.T.); +#170199 = VERTEX_POINT('',#170200); +#170200 = CARTESIAN_POINT('',(100.262234,-100.945287,1.585)); +#170201 = CIRCLE('',#170202,0.348632345848); +#170202 = AXIS2_PLACEMENT_3D('',#170203,#170204,#170205); +#170203 = CARTESIAN_POINT('',(100.17446519403,-100.6078834593,1.585)); +#170204 = DIRECTION('',(0.,0.,-1.)); +#170205 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170206 = ORIENTED_EDGE('',*,*,#170207,.T.); +#170207 = EDGE_CURVE('',#170199,#170208,#170210,.T.); +#170208 = VERTEX_POINT('',#170209); +#170209 = CARTESIAN_POINT('',(100.248717,-100.946618,1.585)); +#170210 = LINE('',#170211,#170212); +#170211 = CARTESIAN_POINT('',(100.262234,-100.945287,1.585)); +#170212 = VECTOR('',#170213,1.); +#170213 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170214 = ORIENTED_EDGE('',*,*,#170215,.T.); +#170215 = EDGE_CURVE('',#170208,#170216,#170218,.T.); +#170216 = VERTEX_POINT('',#170217); +#170217 = CARTESIAN_POINT('',(100.506731,-101.317723,1.585)); +#170218 = LINE('',#170219,#170220); +#170219 = CARTESIAN_POINT('',(100.248717,-100.946618,1.585)); +#170220 = VECTOR('',#170221,1.); +#170221 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170222 = ORIENTED_EDGE('',*,*,#170223,.T.); +#170223 = EDGE_CURVE('',#170216,#170224,#170226,.T.); +#170224 = VERTEX_POINT('',#170225); +#170225 = CARTESIAN_POINT('',(100.376636,-101.390929,1.585)); +#170226 = CIRCLE('',#170227,7.500005951702E-02); +#170227 = AXIS2_PLACEMENT_3D('',#170228,#170229,#170230); +#170228 = CARTESIAN_POINT('',(100.43807806294,-101.3479187473,1.585)); +#170229 = DIRECTION('',(0.,0.,-1.)); +#170230 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170231 = ORIENTED_EDGE('',*,*,#170232,.T.); +#170232 = EDGE_CURVE('',#170224,#170233,#170235,.T.); +#170233 = VERTEX_POINT('',#170234); +#170234 = CARTESIAN_POINT('',(100.065696,-100.946728,1.585)); +#170235 = LINE('',#170236,#170237); +#170236 = CARTESIAN_POINT('',(100.376636,-101.390929,1.585)); +#170237 = VECTOR('',#170238,1.); +#170238 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170239 = ORIENTED_EDGE('',*,*,#170240,.T.); +#170240 = EDGE_CURVE('',#170233,#170241,#170243,.T.); +#170241 = VERTEX_POINT('',#170242); +#170242 = CARTESIAN_POINT('',(99.94165,-100.946728,1.585)); +#170243 = LINE('',#170244,#170245); +#170244 = CARTESIAN_POINT('',(100.065696,-100.946728,1.585)); +#170245 = VECTOR('',#170246,1.); +#170246 = DIRECTION('',(-1.,0.,0.)); +#170247 = ORIENTED_EDGE('',*,*,#170248,.T.); +#170248 = EDGE_CURVE('',#170241,#170249,#170251,.T.); +#170249 = VERTEX_POINT('',#170250); +#170250 = CARTESIAN_POINT('',(99.940209,-101.362551,1.585)); +#170251 = LINE('',#170252,#170253); +#170252 = CARTESIAN_POINT('',(99.94165,-100.946728,1.585)); +#170253 = VECTOR('',#170254,1.); +#170254 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170255 = ORIENTED_EDGE('',*,*,#170256,.T.); +#170256 = EDGE_CURVE('',#170249,#170257,#170259,.T.); +#170257 = VERTEX_POINT('',#170258); +#170258 = CARTESIAN_POINT('',(99.79165,-101.347919,1.585)); +#170259 = CIRCLE('',#170260,7.500006711464E-02); +#170260 = AXIS2_PLACEMENT_3D('',#170261,#170262,#170263); +#170261 = CARTESIAN_POINT('',(99.866650067115,-101.3479190671,1.585)); +#170262 = DIRECTION('',(-0.,0.,-1.)); +#170263 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170264 = ORIENTED_EDGE('',*,*,#170265,.T.); +#170265 = EDGE_CURVE('',#170257,#170163,#170266,.T.); +#170266 = LINE('',#170267,#170268); +#170267 = CARTESIAN_POINT('',(99.79165,-101.347919,1.585)); +#170268 = VECTOR('',#170269,1.); +#170269 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170270 = FACE_BOUND('',#170271,.F.); +#170271 = EDGE_LOOP('',(#170272,#170283,#170291,#170299,#170307,#170316) + ); +#170272 = ORIENTED_EDGE('',*,*,#170273,.T.); +#170273 = EDGE_CURVE('',#170274,#170276,#170278,.T.); +#170274 = VERTEX_POINT('',#170275); +#170275 = CARTESIAN_POINT('',(100.363078,-100.5561,1.585)); +#170276 = VERTEX_POINT('',#170277); +#170277 = CARTESIAN_POINT('',(100.229897,-100.422919,1.585)); +#170278 = CIRCLE('',#170279,0.18686440374); +#170279 = AXIS2_PLACEMENT_3D('',#170280,#170281,#170282); +#170280 = CARTESIAN_POINT('',(100.182361,-100.603636,1.585)); +#170281 = DIRECTION('',(0.,0.,1.)); +#170282 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#170283 = ORIENTED_EDGE('',*,*,#170284,.T.); +#170284 = EDGE_CURVE('',#170276,#170285,#170287,.T.); +#170285 = VERTEX_POINT('',#170286); +#170286 = CARTESIAN_POINT('',(99.94165,-100.422919,1.585)); +#170287 = LINE('',#170288,#170289); +#170288 = CARTESIAN_POINT('',(100.229897,-100.422919,1.585)); +#170289 = VECTOR('',#170290,1.); +#170290 = DIRECTION('',(-1.,0.,0.)); +#170291 = ORIENTED_EDGE('',*,*,#170292,.T.); +#170292 = EDGE_CURVE('',#170285,#170293,#170295,.T.); +#170293 = VERTEX_POINT('',#170294); +#170294 = CARTESIAN_POINT('',(99.94165,-100.796728,1.585)); +#170295 = LINE('',#170296,#170297); +#170296 = CARTESIAN_POINT('',(99.94165,-100.422919,1.585)); +#170297 = VECTOR('',#170298,1.); +#170298 = DIRECTION('',(0.,-1.,0.)); +#170299 = ORIENTED_EDGE('',*,*,#170300,.T.); +#170300 = EDGE_CURVE('',#170293,#170301,#170303,.T.); +#170301 = VERTEX_POINT('',#170302); +#170302 = CARTESIAN_POINT('',(100.229897,-100.796728,1.585)); +#170303 = LINE('',#170304,#170305); +#170304 = CARTESIAN_POINT('',(99.94165,-100.796728,1.585)); +#170305 = VECTOR('',#170306,1.); +#170306 = DIRECTION('',(1.,0.,0.)); +#170307 = ORIENTED_EDGE('',*,*,#170308,.T.); +#170308 = EDGE_CURVE('',#170301,#170309,#170311,.T.); +#170309 = VERTEX_POINT('',#170310); +#170310 = CARTESIAN_POINT('',(100.363078,-100.663547,1.585)); +#170311 = CIRCLE('',#170312,0.18686440374); +#170312 = AXIS2_PLACEMENT_3D('',#170313,#170314,#170315); +#170313 = CARTESIAN_POINT('',(100.182361,-100.616011,1.585)); +#170314 = DIRECTION('',(0.,0.,1.)); +#170315 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170316 = ORIENTED_EDGE('',*,*,#170317,.T.); +#170317 = EDGE_CURVE('',#170309,#170274,#170318,.T.); +#170318 = LINE('',#170319,#170320); +#170319 = CARTESIAN_POINT('',(100.363078,-100.663547,1.585)); +#170320 = VECTOR('',#170321,1.); +#170321 = DIRECTION('',(0.,1.,0.)); +#170322 = PLANE('',#170323); +#170323 = AXIS2_PLACEMENT_3D('',#170324,#170325,#170326); +#170324 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170325 = DIRECTION('',(0.,0.,1.)); +#170326 = DIRECTION('',(1.,0.,-0.)); +#170327 = SHELL_BASED_SURFACE_MODEL('',(#170328)); +#170328 = OPEN_SHELL('',(#170329)); +#170329 = ADVANCED_FACE('',(#170330,#170441),#170493,.T.); +#170330 = FACE_BOUND('',#170331,.F.); +#170331 = EDGE_LOOP('',(#170332,#170343,#170351,#170360,#170368,#170377, + #170385,#170393,#170402,#170410,#170418,#170426,#170435)); +#170332 = ORIENTED_EDGE('',*,*,#170333,.T.); +#170333 = EDGE_CURVE('',#170334,#170336,#170338,.T.); +#170334 = VERTEX_POINT('',#170335); +#170335 = CARTESIAN_POINT('',(103.578805,-100.333287,1.585)); +#170336 = VERTEX_POINT('',#170337); +#170337 = CARTESIAN_POINT('',(103.652364,-100.272919,1.585)); +#170338 = CIRCLE('',#170339,7.500074938983E-02); +#170339 = AXIS2_PLACEMENT_3D('',#170340,#170341,#170342); +#170340 = CARTESIAN_POINT('',(103.65236446611,-100.3479197493,1.585)); +#170341 = DIRECTION('',(0.,0.,-1.)); +#170342 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170343 = ORIENTED_EDGE('',*,*,#170344,.T.); +#170344 = EDGE_CURVE('',#170336,#170345,#170347,.T.); +#170345 = VERTEX_POINT('',#170346); +#170346 = CARTESIAN_POINT('',(104.047948,-100.27436,1.585)); +#170347 = LINE('',#170348,#170349); +#170348 = CARTESIAN_POINT('',(103.652364,-100.272919,1.585)); +#170349 = VECTOR('',#170350,1.); +#170350 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170351 = ORIENTED_EDGE('',*,*,#170352,.T.); +#170352 = EDGE_CURVE('',#170345,#170353,#170355,.T.); +#170353 = VERTEX_POINT('',#170354); +#170354 = CARTESIAN_POINT('',(104.297351,-100.523763,1.585)); +#170355 = CIRCLE('',#170356,0.347870264855); +#170356 = AXIS2_PLACEMENT_3D('',#170357,#170358,#170359); +#170357 = CARTESIAN_POINT('',(103.96062026502,-100.6110907349,1.585)); +#170358 = DIRECTION('',(0.,0.,-1.)); +#170359 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170360 = ORIENTED_EDGE('',*,*,#170361,.T.); +#170361 = EDGE_CURVE('',#170353,#170362,#170364,.T.); +#170362 = VERTEX_POINT('',#170363); +#170363 = CARTESIAN_POINT('',(104.296129,-100.701062,1.585)); +#170364 = LINE('',#170365,#170366); +#170365 = CARTESIAN_POINT('',(104.297351,-100.523763,1.585)); +#170366 = VECTOR('',#170367,1.); +#170367 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#170368 = ORIENTED_EDGE('',*,*,#170369,.T.); +#170369 = EDGE_CURVE('',#170362,#170370,#170372,.T.); +#170370 = VERTEX_POINT('',#170371); +#170371 = CARTESIAN_POINT('',(104.047948,-100.945287,1.585)); +#170372 = CIRCLE('',#170373,0.348632345848); +#170373 = AXIS2_PLACEMENT_3D('',#170374,#170375,#170376); +#170374 = CARTESIAN_POINT('',(103.96017919403,-100.6078834593,1.585)); +#170375 = DIRECTION('',(0.,0.,-1.)); +#170376 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170377 = ORIENTED_EDGE('',*,*,#170378,.T.); +#170378 = EDGE_CURVE('',#170370,#170379,#170381,.T.); +#170379 = VERTEX_POINT('',#170380); +#170380 = CARTESIAN_POINT('',(104.034431,-100.946618,1.585)); +#170381 = LINE('',#170382,#170383); +#170382 = CARTESIAN_POINT('',(104.047948,-100.945287,1.585)); +#170383 = VECTOR('',#170384,1.); +#170384 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170385 = ORIENTED_EDGE('',*,*,#170386,.T.); +#170386 = EDGE_CURVE('',#170379,#170387,#170389,.T.); +#170387 = VERTEX_POINT('',#170388); +#170388 = CARTESIAN_POINT('',(104.292445,-101.317723,1.585)); +#170389 = LINE('',#170390,#170391); +#170390 = CARTESIAN_POINT('',(104.034431,-100.946618,1.585)); +#170391 = VECTOR('',#170392,1.); +#170392 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170393 = ORIENTED_EDGE('',*,*,#170394,.T.); +#170394 = EDGE_CURVE('',#170387,#170395,#170397,.T.); +#170395 = VERTEX_POINT('',#170396); +#170396 = CARTESIAN_POINT('',(104.16235,-101.390929,1.585)); +#170397 = CIRCLE('',#170398,7.500005951702E-02); +#170398 = AXIS2_PLACEMENT_3D('',#170399,#170400,#170401); +#170399 = CARTESIAN_POINT('',(104.22379206294,-101.3479187473,1.585)); +#170400 = DIRECTION('',(0.,0.,-1.)); +#170401 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170402 = ORIENTED_EDGE('',*,*,#170403,.T.); +#170403 = EDGE_CURVE('',#170395,#170404,#170406,.T.); +#170404 = VERTEX_POINT('',#170405); +#170405 = CARTESIAN_POINT('',(103.85141,-100.946728,1.585)); +#170406 = LINE('',#170407,#170408); +#170407 = CARTESIAN_POINT('',(104.16235,-101.390929,1.585)); +#170408 = VECTOR('',#170409,1.); +#170409 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170410 = ORIENTED_EDGE('',*,*,#170411,.T.); +#170411 = EDGE_CURVE('',#170404,#170412,#170414,.T.); +#170412 = VERTEX_POINT('',#170413); +#170413 = CARTESIAN_POINT('',(103.727364,-100.946728,1.585)); +#170414 = LINE('',#170415,#170416); +#170415 = CARTESIAN_POINT('',(103.85141,-100.946728,1.585)); +#170416 = VECTOR('',#170417,1.); +#170417 = DIRECTION('',(-1.,0.,0.)); +#170418 = ORIENTED_EDGE('',*,*,#170419,.T.); +#170419 = EDGE_CURVE('',#170412,#170420,#170422,.T.); +#170420 = VERTEX_POINT('',#170421); +#170421 = CARTESIAN_POINT('',(103.725923,-101.362551,1.585)); +#170422 = LINE('',#170423,#170424); +#170423 = CARTESIAN_POINT('',(103.727364,-100.946728,1.585)); +#170424 = VECTOR('',#170425,1.); +#170425 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170426 = ORIENTED_EDGE('',*,*,#170427,.T.); +#170427 = EDGE_CURVE('',#170420,#170428,#170430,.T.); +#170428 = VERTEX_POINT('',#170429); +#170429 = CARTESIAN_POINT('',(103.577364,-101.347919,1.585)); +#170430 = CIRCLE('',#170431,7.500006711463E-02); +#170431 = AXIS2_PLACEMENT_3D('',#170432,#170433,#170434); +#170432 = CARTESIAN_POINT('',(103.65236406711,-101.3479190671,1.585)); +#170433 = DIRECTION('',(-0.,0.,-1.)); +#170434 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170435 = ORIENTED_EDGE('',*,*,#170436,.T.); +#170436 = EDGE_CURVE('',#170428,#170334,#170437,.T.); +#170437 = LINE('',#170438,#170439); +#170438 = CARTESIAN_POINT('',(103.577364,-101.347919,1.585)); +#170439 = VECTOR('',#170440,1.); +#170440 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170441 = FACE_BOUND('',#170442,.F.); +#170442 = EDGE_LOOP('',(#170443,#170454,#170462,#170470,#170478,#170487) + ); +#170443 = ORIENTED_EDGE('',*,*,#170444,.T.); +#170444 = EDGE_CURVE('',#170445,#170447,#170449,.T.); +#170445 = VERTEX_POINT('',#170446); +#170446 = CARTESIAN_POINT('',(104.148792,-100.5561,1.585)); +#170447 = VERTEX_POINT('',#170448); +#170448 = CARTESIAN_POINT('',(104.015611,-100.422919,1.585)); +#170449 = CIRCLE('',#170450,0.18686440374); +#170450 = AXIS2_PLACEMENT_3D('',#170451,#170452,#170453); +#170451 = CARTESIAN_POINT('',(103.968075,-100.603636,1.585)); +#170452 = DIRECTION('',(0.,0.,1.)); +#170453 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170454 = ORIENTED_EDGE('',*,*,#170455,.T.); +#170455 = EDGE_CURVE('',#170447,#170456,#170458,.T.); +#170456 = VERTEX_POINT('',#170457); +#170457 = CARTESIAN_POINT('',(103.727364,-100.422919,1.585)); +#170458 = LINE('',#170459,#170460); +#170459 = CARTESIAN_POINT('',(104.015611,-100.422919,1.585)); +#170460 = VECTOR('',#170461,1.); +#170461 = DIRECTION('',(-1.,0.,0.)); +#170462 = ORIENTED_EDGE('',*,*,#170463,.T.); +#170463 = EDGE_CURVE('',#170456,#170464,#170466,.T.); +#170464 = VERTEX_POINT('',#170465); +#170465 = CARTESIAN_POINT('',(103.727364,-100.796728,1.585)); +#170466 = LINE('',#170467,#170468); +#170467 = CARTESIAN_POINT('',(103.727364,-100.422919,1.585)); +#170468 = VECTOR('',#170469,1.); +#170469 = DIRECTION('',(0.,-1.,0.)); +#170470 = ORIENTED_EDGE('',*,*,#170471,.T.); +#170471 = EDGE_CURVE('',#170464,#170472,#170474,.T.); +#170472 = VERTEX_POINT('',#170473); +#170473 = CARTESIAN_POINT('',(104.015611,-100.796728,1.585)); +#170474 = LINE('',#170475,#170476); +#170475 = CARTESIAN_POINT('',(103.727364,-100.796728,1.585)); +#170476 = VECTOR('',#170477,1.); +#170477 = DIRECTION('',(1.,0.,0.)); +#170478 = ORIENTED_EDGE('',*,*,#170479,.T.); +#170479 = EDGE_CURVE('',#170472,#170480,#170482,.T.); +#170480 = VERTEX_POINT('',#170481); +#170481 = CARTESIAN_POINT('',(104.148792,-100.663547,1.585)); +#170482 = CIRCLE('',#170483,0.18686440374); +#170483 = AXIS2_PLACEMENT_3D('',#170484,#170485,#170486); +#170484 = CARTESIAN_POINT('',(103.968075,-100.616011,1.585)); +#170485 = DIRECTION('',(0.,0.,1.)); +#170486 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170487 = ORIENTED_EDGE('',*,*,#170488,.T.); +#170488 = EDGE_CURVE('',#170480,#170445,#170489,.T.); +#170489 = LINE('',#170490,#170491); +#170490 = CARTESIAN_POINT('',(104.148792,-100.663547,1.585)); +#170491 = VECTOR('',#170492,1.); +#170492 = DIRECTION('',(0.,1.,0.)); +#170493 = PLANE('',#170494); +#170494 = AXIS2_PLACEMENT_3D('',#170495,#170496,#170497); +#170495 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170496 = DIRECTION('',(0.,0.,1.)); +#170497 = DIRECTION('',(1.,0.,-0.)); +#170498 = SHELL_BASED_SURFACE_MODEL('',(#170499)); +#170499 = OPEN_SHELL('',(#170500)); +#170500 = ADVANCED_FACE('',(#170501,#170612),#170664,.T.); +#170501 = FACE_BOUND('',#170502,.F.); +#170502 = EDGE_LOOP('',(#170503,#170514,#170522,#170531,#170539,#170548, + #170556,#170564,#170573,#170581,#170589,#170597,#170606)); +#170503 = ORIENTED_EDGE('',*,*,#170504,.T.); +#170504 = EDGE_CURVE('',#170505,#170507,#170509,.T.); +#170505 = VERTEX_POINT('',#170506); +#170506 = CARTESIAN_POINT('',(107.078805,-100.333287,1.585)); +#170507 = VERTEX_POINT('',#170508); +#170508 = CARTESIAN_POINT('',(107.152364,-100.272919,1.585)); +#170509 = CIRCLE('',#170510,7.500074938983E-02); +#170510 = AXIS2_PLACEMENT_3D('',#170511,#170512,#170513); +#170511 = CARTESIAN_POINT('',(107.15236446611,-100.3479197493,1.585)); +#170512 = DIRECTION('',(0.,0.,-1.)); +#170513 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170514 = ORIENTED_EDGE('',*,*,#170515,.T.); +#170515 = EDGE_CURVE('',#170507,#170516,#170518,.T.); +#170516 = VERTEX_POINT('',#170517); +#170517 = CARTESIAN_POINT('',(107.547948,-100.27436,1.585)); +#170518 = LINE('',#170519,#170520); +#170519 = CARTESIAN_POINT('',(107.152364,-100.272919,1.585)); +#170520 = VECTOR('',#170521,1.); +#170521 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170522 = ORIENTED_EDGE('',*,*,#170523,.T.); +#170523 = EDGE_CURVE('',#170516,#170524,#170526,.T.); +#170524 = VERTEX_POINT('',#170525); +#170525 = CARTESIAN_POINT('',(107.797351,-100.523763,1.585)); +#170526 = CIRCLE('',#170527,0.347870264855); +#170527 = AXIS2_PLACEMENT_3D('',#170528,#170529,#170530); +#170528 = CARTESIAN_POINT('',(107.46062026502,-100.6110907349,1.585)); +#170529 = DIRECTION('',(0.,0.,-1.)); +#170530 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170531 = ORIENTED_EDGE('',*,*,#170532,.T.); +#170532 = EDGE_CURVE('',#170524,#170533,#170535,.T.); +#170533 = VERTEX_POINT('',#170534); +#170534 = CARTESIAN_POINT('',(107.796129,-100.701062,1.585)); +#170535 = LINE('',#170536,#170537); +#170536 = CARTESIAN_POINT('',(107.797351,-100.523763,1.585)); +#170537 = VECTOR('',#170538,1.); +#170538 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#170539 = ORIENTED_EDGE('',*,*,#170540,.T.); +#170540 = EDGE_CURVE('',#170533,#170541,#170543,.T.); +#170541 = VERTEX_POINT('',#170542); +#170542 = CARTESIAN_POINT('',(107.547948,-100.945287,1.585)); +#170543 = CIRCLE('',#170544,0.348632345848); +#170544 = AXIS2_PLACEMENT_3D('',#170545,#170546,#170547); +#170545 = CARTESIAN_POINT('',(107.46017919403,-100.6078834593,1.585)); +#170546 = DIRECTION('',(0.,0.,-1.)); +#170547 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170548 = ORIENTED_EDGE('',*,*,#170549,.T.); +#170549 = EDGE_CURVE('',#170541,#170550,#170552,.T.); +#170550 = VERTEX_POINT('',#170551); +#170551 = CARTESIAN_POINT('',(107.534431,-100.946618,1.585)); +#170552 = LINE('',#170553,#170554); +#170553 = CARTESIAN_POINT('',(107.547948,-100.945287,1.585)); +#170554 = VECTOR('',#170555,1.); +#170555 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170556 = ORIENTED_EDGE('',*,*,#170557,.T.); +#170557 = EDGE_CURVE('',#170550,#170558,#170560,.T.); +#170558 = VERTEX_POINT('',#170559); +#170559 = CARTESIAN_POINT('',(107.792445,-101.317723,1.585)); +#170560 = LINE('',#170561,#170562); +#170561 = CARTESIAN_POINT('',(107.534431,-100.946618,1.585)); +#170562 = VECTOR('',#170563,1.); +#170563 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170564 = ORIENTED_EDGE('',*,*,#170565,.T.); +#170565 = EDGE_CURVE('',#170558,#170566,#170568,.T.); +#170566 = VERTEX_POINT('',#170567); +#170567 = CARTESIAN_POINT('',(107.66235,-101.390929,1.585)); +#170568 = CIRCLE('',#170569,7.500005951702E-02); +#170569 = AXIS2_PLACEMENT_3D('',#170570,#170571,#170572); +#170570 = CARTESIAN_POINT('',(107.72379206294,-101.3479187473,1.585)); +#170571 = DIRECTION('',(0.,0.,-1.)); +#170572 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170573 = ORIENTED_EDGE('',*,*,#170574,.T.); +#170574 = EDGE_CURVE('',#170566,#170575,#170577,.T.); +#170575 = VERTEX_POINT('',#170576); +#170576 = CARTESIAN_POINT('',(107.35141,-100.946728,1.585)); +#170577 = LINE('',#170578,#170579); +#170578 = CARTESIAN_POINT('',(107.66235,-101.390929,1.585)); +#170579 = VECTOR('',#170580,1.); +#170580 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170581 = ORIENTED_EDGE('',*,*,#170582,.T.); +#170582 = EDGE_CURVE('',#170575,#170583,#170585,.T.); +#170583 = VERTEX_POINT('',#170584); +#170584 = CARTESIAN_POINT('',(107.227364,-100.946728,1.585)); +#170585 = LINE('',#170586,#170587); +#170586 = CARTESIAN_POINT('',(107.35141,-100.946728,1.585)); +#170587 = VECTOR('',#170588,1.); +#170588 = DIRECTION('',(-1.,0.,0.)); +#170589 = ORIENTED_EDGE('',*,*,#170590,.T.); +#170590 = EDGE_CURVE('',#170583,#170591,#170593,.T.); +#170591 = VERTEX_POINT('',#170592); +#170592 = CARTESIAN_POINT('',(107.225923,-101.362551,1.585)); +#170593 = LINE('',#170594,#170595); +#170594 = CARTESIAN_POINT('',(107.227364,-100.946728,1.585)); +#170595 = VECTOR('',#170596,1.); +#170596 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170597 = ORIENTED_EDGE('',*,*,#170598,.T.); +#170598 = EDGE_CURVE('',#170591,#170599,#170601,.T.); +#170599 = VERTEX_POINT('',#170600); +#170600 = CARTESIAN_POINT('',(107.077364,-101.347919,1.585)); +#170601 = CIRCLE('',#170602,7.500006711463E-02); +#170602 = AXIS2_PLACEMENT_3D('',#170603,#170604,#170605); +#170603 = CARTESIAN_POINT('',(107.15236406711,-101.3479190671,1.585)); +#170604 = DIRECTION('',(-0.,0.,-1.)); +#170605 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170606 = ORIENTED_EDGE('',*,*,#170607,.T.); +#170607 = EDGE_CURVE('',#170599,#170505,#170608,.T.); +#170608 = LINE('',#170609,#170610); +#170609 = CARTESIAN_POINT('',(107.077364,-101.347919,1.585)); +#170610 = VECTOR('',#170611,1.); +#170611 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170612 = FACE_BOUND('',#170613,.F.); +#170613 = EDGE_LOOP('',(#170614,#170625,#170633,#170641,#170649,#170658) + ); +#170614 = ORIENTED_EDGE('',*,*,#170615,.T.); +#170615 = EDGE_CURVE('',#170616,#170618,#170620,.T.); +#170616 = VERTEX_POINT('',#170617); +#170617 = CARTESIAN_POINT('',(107.648792,-100.5561,1.585)); +#170618 = VERTEX_POINT('',#170619); +#170619 = CARTESIAN_POINT('',(107.515611,-100.422919,1.585)); +#170620 = CIRCLE('',#170621,0.18686440374); +#170621 = AXIS2_PLACEMENT_3D('',#170622,#170623,#170624); +#170622 = CARTESIAN_POINT('',(107.468075,-100.603636,1.585)); +#170623 = DIRECTION('',(0.,0.,1.)); +#170624 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170625 = ORIENTED_EDGE('',*,*,#170626,.T.); +#170626 = EDGE_CURVE('',#170618,#170627,#170629,.T.); +#170627 = VERTEX_POINT('',#170628); +#170628 = CARTESIAN_POINT('',(107.227364,-100.422919,1.585)); +#170629 = LINE('',#170630,#170631); +#170630 = CARTESIAN_POINT('',(107.515611,-100.422919,1.585)); +#170631 = VECTOR('',#170632,1.); +#170632 = DIRECTION('',(-1.,0.,0.)); +#170633 = ORIENTED_EDGE('',*,*,#170634,.T.); +#170634 = EDGE_CURVE('',#170627,#170635,#170637,.T.); +#170635 = VERTEX_POINT('',#170636); +#170636 = CARTESIAN_POINT('',(107.227364,-100.796728,1.585)); +#170637 = LINE('',#170638,#170639); +#170638 = CARTESIAN_POINT('',(107.227364,-100.422919,1.585)); +#170639 = VECTOR('',#170640,1.); +#170640 = DIRECTION('',(0.,-1.,0.)); +#170641 = ORIENTED_EDGE('',*,*,#170642,.T.); +#170642 = EDGE_CURVE('',#170635,#170643,#170645,.T.); +#170643 = VERTEX_POINT('',#170644); +#170644 = CARTESIAN_POINT('',(107.515611,-100.796728,1.585)); +#170645 = LINE('',#170646,#170647); +#170646 = CARTESIAN_POINT('',(107.227364,-100.796728,1.585)); +#170647 = VECTOR('',#170648,1.); +#170648 = DIRECTION('',(1.,0.,0.)); +#170649 = ORIENTED_EDGE('',*,*,#170650,.T.); +#170650 = EDGE_CURVE('',#170643,#170651,#170653,.T.); +#170651 = VERTEX_POINT('',#170652); +#170652 = CARTESIAN_POINT('',(107.648792,-100.663547,1.585)); +#170653 = CIRCLE('',#170654,0.18686440374); +#170654 = AXIS2_PLACEMENT_3D('',#170655,#170656,#170657); +#170655 = CARTESIAN_POINT('',(107.468075,-100.616011,1.585)); +#170656 = DIRECTION('',(0.,0.,1.)); +#170657 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170658 = ORIENTED_EDGE('',*,*,#170659,.T.); +#170659 = EDGE_CURVE('',#170651,#170616,#170660,.T.); +#170660 = LINE('',#170661,#170662); +#170661 = CARTESIAN_POINT('',(107.648792,-100.663547,1.585)); +#170662 = VECTOR('',#170663,1.); +#170663 = DIRECTION('',(0.,1.,0.)); +#170664 = PLANE('',#170665); +#170665 = AXIS2_PLACEMENT_3D('',#170666,#170667,#170668); +#170666 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170667 = DIRECTION('',(0.,0.,1.)); +#170668 = DIRECTION('',(1.,0.,-0.)); +#170669 = SHELL_BASED_SURFACE_MODEL('',(#170670)); +#170670 = OPEN_SHELL('',(#170671)); +#170671 = ADVANCED_FACE('',(#170672,#170783),#170835,.T.); +#170672 = FACE_BOUND('',#170673,.F.); +#170673 = EDGE_LOOP('',(#170674,#170685,#170693,#170702,#170710,#170719, + #170727,#170735,#170744,#170752,#170760,#170768,#170777)); +#170674 = ORIENTED_EDGE('',*,*,#170675,.T.); +#170675 = EDGE_CURVE('',#170676,#170678,#170680,.T.); +#170676 = VERTEX_POINT('',#170677); +#170677 = CARTESIAN_POINT('',(111.078805,-100.333287,1.585)); +#170678 = VERTEX_POINT('',#170679); +#170679 = CARTESIAN_POINT('',(111.152364,-100.272919,1.585)); +#170680 = CIRCLE('',#170681,7.500074938983E-02); +#170681 = AXIS2_PLACEMENT_3D('',#170682,#170683,#170684); +#170682 = CARTESIAN_POINT('',(111.15236446611,-100.3479197493,1.585)); +#170683 = DIRECTION('',(0.,0.,-1.)); +#170684 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#170685 = ORIENTED_EDGE('',*,*,#170686,.T.); +#170686 = EDGE_CURVE('',#170678,#170687,#170689,.T.); +#170687 = VERTEX_POINT('',#170688); +#170688 = CARTESIAN_POINT('',(111.547948,-100.27436,1.585)); +#170689 = LINE('',#170690,#170691); +#170690 = CARTESIAN_POINT('',(111.152364,-100.272919,1.585)); +#170691 = VECTOR('',#170692,1.); +#170692 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#170693 = ORIENTED_EDGE('',*,*,#170694,.T.); +#170694 = EDGE_CURVE('',#170687,#170695,#170697,.T.); +#170695 = VERTEX_POINT('',#170696); +#170696 = CARTESIAN_POINT('',(111.797351,-100.523763,1.585)); +#170697 = CIRCLE('',#170698,0.347870264855); +#170698 = AXIS2_PLACEMENT_3D('',#170699,#170700,#170701); +#170699 = CARTESIAN_POINT('',(111.46062026502,-100.6110907349,1.585)); +#170700 = DIRECTION('',(0.,0.,-1.)); +#170701 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170702 = ORIENTED_EDGE('',*,*,#170703,.T.); +#170703 = EDGE_CURVE('',#170695,#170704,#170706,.T.); +#170704 = VERTEX_POINT('',#170705); +#170705 = CARTESIAN_POINT('',(111.796129,-100.701062,1.585)); +#170706 = LINE('',#170707,#170708); +#170707 = CARTESIAN_POINT('',(111.797351,-100.523763,1.585)); +#170708 = VECTOR('',#170709,1.); +#170709 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#170710 = ORIENTED_EDGE('',*,*,#170711,.T.); +#170711 = EDGE_CURVE('',#170704,#170712,#170714,.T.); +#170712 = VERTEX_POINT('',#170713); +#170713 = CARTESIAN_POINT('',(111.547948,-100.945287,1.585)); +#170714 = CIRCLE('',#170715,0.348632345848); +#170715 = AXIS2_PLACEMENT_3D('',#170716,#170717,#170718); +#170716 = CARTESIAN_POINT('',(111.46017919403,-100.6078834593,1.585)); +#170717 = DIRECTION('',(0.,0.,-1.)); +#170718 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170719 = ORIENTED_EDGE('',*,*,#170720,.T.); +#170720 = EDGE_CURVE('',#170712,#170721,#170723,.T.); +#170721 = VERTEX_POINT('',#170722); +#170722 = CARTESIAN_POINT('',(111.534431,-100.946618,1.585)); +#170723 = LINE('',#170724,#170725); +#170724 = CARTESIAN_POINT('',(111.547948,-100.945287,1.585)); +#170725 = VECTOR('',#170726,1.); +#170726 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170727 = ORIENTED_EDGE('',*,*,#170728,.T.); +#170728 = EDGE_CURVE('',#170721,#170729,#170731,.T.); +#170729 = VERTEX_POINT('',#170730); +#170730 = CARTESIAN_POINT('',(111.792445,-101.317723,1.585)); +#170731 = LINE('',#170732,#170733); +#170732 = CARTESIAN_POINT('',(111.534431,-100.946618,1.585)); +#170733 = VECTOR('',#170734,1.); +#170734 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170735 = ORIENTED_EDGE('',*,*,#170736,.T.); +#170736 = EDGE_CURVE('',#170729,#170737,#170739,.T.); +#170737 = VERTEX_POINT('',#170738); +#170738 = CARTESIAN_POINT('',(111.66235,-101.390929,1.585)); +#170739 = CIRCLE('',#170740,7.500005951702E-02); +#170740 = AXIS2_PLACEMENT_3D('',#170741,#170742,#170743); +#170741 = CARTESIAN_POINT('',(111.72379206294,-101.3479187473,1.585)); +#170742 = DIRECTION('',(0.,0.,-1.)); +#170743 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170744 = ORIENTED_EDGE('',*,*,#170745,.T.); +#170745 = EDGE_CURVE('',#170737,#170746,#170748,.T.); +#170746 = VERTEX_POINT('',#170747); +#170747 = CARTESIAN_POINT('',(111.35141,-100.946728,1.585)); +#170748 = LINE('',#170749,#170750); +#170749 = CARTESIAN_POINT('',(111.66235,-101.390929,1.585)); +#170750 = VECTOR('',#170751,1.); +#170751 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170752 = ORIENTED_EDGE('',*,*,#170753,.T.); +#170753 = EDGE_CURVE('',#170746,#170754,#170756,.T.); +#170754 = VERTEX_POINT('',#170755); +#170755 = CARTESIAN_POINT('',(111.227364,-100.946728,1.585)); +#170756 = LINE('',#170757,#170758); +#170757 = CARTESIAN_POINT('',(111.35141,-100.946728,1.585)); +#170758 = VECTOR('',#170759,1.); +#170759 = DIRECTION('',(-1.,0.,0.)); +#170760 = ORIENTED_EDGE('',*,*,#170761,.T.); +#170761 = EDGE_CURVE('',#170754,#170762,#170764,.T.); +#170762 = VERTEX_POINT('',#170763); +#170763 = CARTESIAN_POINT('',(111.225923,-101.362551,1.585)); +#170764 = LINE('',#170765,#170766); +#170765 = CARTESIAN_POINT('',(111.227364,-100.946728,1.585)); +#170766 = VECTOR('',#170767,1.); +#170767 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170768 = ORIENTED_EDGE('',*,*,#170769,.T.); +#170769 = EDGE_CURVE('',#170762,#170770,#170772,.T.); +#170770 = VERTEX_POINT('',#170771); +#170771 = CARTESIAN_POINT('',(111.077364,-101.347919,1.585)); +#170772 = CIRCLE('',#170773,7.500006711463E-02); +#170773 = AXIS2_PLACEMENT_3D('',#170774,#170775,#170776); +#170774 = CARTESIAN_POINT('',(111.15236406711,-101.3479190671,1.585)); +#170775 = DIRECTION('',(-0.,0.,-1.)); +#170776 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170777 = ORIENTED_EDGE('',*,*,#170778,.T.); +#170778 = EDGE_CURVE('',#170770,#170676,#170779,.T.); +#170779 = LINE('',#170780,#170781); +#170780 = CARTESIAN_POINT('',(111.077364,-101.347919,1.585)); +#170781 = VECTOR('',#170782,1.); +#170782 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170783 = FACE_BOUND('',#170784,.F.); +#170784 = EDGE_LOOP('',(#170785,#170796,#170804,#170812,#170820,#170829) + ); +#170785 = ORIENTED_EDGE('',*,*,#170786,.T.); +#170786 = EDGE_CURVE('',#170787,#170789,#170791,.T.); +#170787 = VERTEX_POINT('',#170788); +#170788 = CARTESIAN_POINT('',(111.648792,-100.5561,1.585)); +#170789 = VERTEX_POINT('',#170790); +#170790 = CARTESIAN_POINT('',(111.515611,-100.422919,1.585)); +#170791 = CIRCLE('',#170792,0.18686440374); +#170792 = AXIS2_PLACEMENT_3D('',#170793,#170794,#170795); +#170793 = CARTESIAN_POINT('',(111.468075,-100.603636,1.585)); +#170794 = DIRECTION('',(0.,0.,1.)); +#170795 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170796 = ORIENTED_EDGE('',*,*,#170797,.T.); +#170797 = EDGE_CURVE('',#170789,#170798,#170800,.T.); +#170798 = VERTEX_POINT('',#170799); +#170799 = CARTESIAN_POINT('',(111.227364,-100.422919,1.585)); +#170800 = LINE('',#170801,#170802); +#170801 = CARTESIAN_POINT('',(111.515611,-100.422919,1.585)); +#170802 = VECTOR('',#170803,1.); +#170803 = DIRECTION('',(-1.,0.,0.)); +#170804 = ORIENTED_EDGE('',*,*,#170805,.T.); +#170805 = EDGE_CURVE('',#170798,#170806,#170808,.T.); +#170806 = VERTEX_POINT('',#170807); +#170807 = CARTESIAN_POINT('',(111.227364,-100.796728,1.585)); +#170808 = LINE('',#170809,#170810); +#170809 = CARTESIAN_POINT('',(111.227364,-100.422919,1.585)); +#170810 = VECTOR('',#170811,1.); +#170811 = DIRECTION('',(0.,-1.,0.)); +#170812 = ORIENTED_EDGE('',*,*,#170813,.T.); +#170813 = EDGE_CURVE('',#170806,#170814,#170816,.T.); +#170814 = VERTEX_POINT('',#170815); +#170815 = CARTESIAN_POINT('',(111.515611,-100.796728,1.585)); +#170816 = LINE('',#170817,#170818); +#170817 = CARTESIAN_POINT('',(111.227364,-100.796728,1.585)); +#170818 = VECTOR('',#170819,1.); +#170819 = DIRECTION('',(1.,0.,0.)); +#170820 = ORIENTED_EDGE('',*,*,#170821,.T.); +#170821 = EDGE_CURVE('',#170814,#170822,#170824,.T.); +#170822 = VERTEX_POINT('',#170823); +#170823 = CARTESIAN_POINT('',(111.648792,-100.663547,1.585)); +#170824 = CIRCLE('',#170825,0.18686440374); +#170825 = AXIS2_PLACEMENT_3D('',#170826,#170827,#170828); +#170826 = CARTESIAN_POINT('',(111.468075,-100.616011,1.585)); +#170827 = DIRECTION('',(0.,0.,1.)); +#170828 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#170829 = ORIENTED_EDGE('',*,*,#170830,.T.); +#170830 = EDGE_CURVE('',#170822,#170787,#170831,.T.); +#170831 = LINE('',#170832,#170833); +#170832 = CARTESIAN_POINT('',(111.648792,-100.663547,1.585)); +#170833 = VECTOR('',#170834,1.); +#170834 = DIRECTION('',(0.,1.,0.)); +#170835 = PLANE('',#170836); +#170836 = AXIS2_PLACEMENT_3D('',#170837,#170838,#170839); +#170837 = CARTESIAN_POINT('',(0.,0.,1.585)); +#170838 = DIRECTION('',(0.,0.,1.)); +#170839 = DIRECTION('',(1.,0.,-0.)); +#170840 = SHELL_BASED_SURFACE_MODEL('',(#170841)); +#170841 = OPEN_SHELL('',(#170842)); +#170842 = ADVANCED_FACE('',(#170843,#170954),#171006,.T.); +#170843 = FACE_BOUND('',#170844,.F.); +#170844 = EDGE_LOOP('',(#170845,#170856,#170864,#170873,#170881,#170890, + #170898,#170906,#170915,#170923,#170931,#170939,#170948)); +#170845 = ORIENTED_EDGE('',*,*,#170846,.T.); +#170846 = EDGE_CURVE('',#170847,#170849,#170851,.T.); +#170847 = VERTEX_POINT('',#170848); +#170848 = CARTESIAN_POINT('',(178.228805,-100.333287,1.585)); +#170849 = VERTEX_POINT('',#170850); +#170850 = CARTESIAN_POINT('',(178.302364,-100.272919,1.585)); +#170851 = CIRCLE('',#170852,7.500074938989E-02); +#170852 = AXIS2_PLACEMENT_3D('',#170853,#170854,#170855); +#170853 = CARTESIAN_POINT('',(178.30236446611,-100.3479197493,1.585)); +#170854 = DIRECTION('',(0.,0.,-1.)); +#170855 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#170856 = ORIENTED_EDGE('',*,*,#170857,.T.); +#170857 = EDGE_CURVE('',#170849,#170858,#170860,.T.); +#170858 = VERTEX_POINT('',#170859); +#170859 = CARTESIAN_POINT('',(178.697948,-100.27436,1.585)); +#170860 = LINE('',#170861,#170862); +#170861 = CARTESIAN_POINT('',(178.302364,-100.272919,1.585)); +#170862 = VECTOR('',#170863,1.); +#170863 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#170864 = ORIENTED_EDGE('',*,*,#170865,.T.); +#170865 = EDGE_CURVE('',#170858,#170866,#170868,.T.); +#170866 = VERTEX_POINT('',#170867); +#170867 = CARTESIAN_POINT('',(178.947351,-100.523763,1.585)); +#170868 = CIRCLE('',#170869,0.347870264855); +#170869 = AXIS2_PLACEMENT_3D('',#170870,#170871,#170872); +#170870 = CARTESIAN_POINT('',(178.61062026502,-100.6110907349,1.585)); +#170871 = DIRECTION('',(0.,0.,-1.)); +#170872 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#170873 = ORIENTED_EDGE('',*,*,#170874,.T.); +#170874 = EDGE_CURVE('',#170866,#170875,#170877,.T.); +#170875 = VERTEX_POINT('',#170876); +#170876 = CARTESIAN_POINT('',(178.946129,-100.701062,1.585)); +#170877 = LINE('',#170878,#170879); +#170878 = CARTESIAN_POINT('',(178.947351,-100.523763,1.585)); +#170879 = VECTOR('',#170880,1.); +#170880 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#170881 = ORIENTED_EDGE('',*,*,#170882,.T.); +#170882 = EDGE_CURVE('',#170875,#170883,#170885,.T.); +#170883 = VERTEX_POINT('',#170884); +#170884 = CARTESIAN_POINT('',(178.697948,-100.945287,1.585)); +#170885 = CIRCLE('',#170886,0.348632345849); +#170886 = AXIS2_PLACEMENT_3D('',#170887,#170888,#170889); +#170887 = CARTESIAN_POINT('',(178.61017919403,-100.6078834593,1.585)); +#170888 = DIRECTION('',(0.,0.,-1.)); +#170889 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#170890 = ORIENTED_EDGE('',*,*,#170891,.T.); +#170891 = EDGE_CURVE('',#170883,#170892,#170894,.T.); +#170892 = VERTEX_POINT('',#170893); +#170893 = CARTESIAN_POINT('',(178.684431,-100.946618,1.585)); +#170894 = LINE('',#170895,#170896); +#170895 = CARTESIAN_POINT('',(178.697948,-100.945287,1.585)); +#170896 = VECTOR('',#170897,1.); +#170897 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#170898 = ORIENTED_EDGE('',*,*,#170899,.T.); +#170899 = EDGE_CURVE('',#170892,#170900,#170902,.T.); +#170900 = VERTEX_POINT('',#170901); +#170901 = CARTESIAN_POINT('',(178.942445,-101.317723,1.585)); +#170902 = LINE('',#170903,#170904); +#170903 = CARTESIAN_POINT('',(178.684431,-100.946618,1.585)); +#170904 = VECTOR('',#170905,1.); +#170905 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#170906 = ORIENTED_EDGE('',*,*,#170907,.T.); +#170907 = EDGE_CURVE('',#170900,#170908,#170910,.T.); +#170908 = VERTEX_POINT('',#170909); +#170909 = CARTESIAN_POINT('',(178.81235,-101.390929,1.585)); +#170910 = CIRCLE('',#170911,7.500005951702E-02); +#170911 = AXIS2_PLACEMENT_3D('',#170912,#170913,#170914); +#170912 = CARTESIAN_POINT('',(178.87379206294,-101.3479187473,1.585)); +#170913 = DIRECTION('',(0.,0.,-1.)); +#170914 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#170915 = ORIENTED_EDGE('',*,*,#170916,.T.); +#170916 = EDGE_CURVE('',#170908,#170917,#170919,.T.); +#170917 = VERTEX_POINT('',#170918); +#170918 = CARTESIAN_POINT('',(178.50141,-100.946728,1.585)); +#170919 = LINE('',#170920,#170921); +#170920 = CARTESIAN_POINT('',(178.81235,-101.390929,1.585)); +#170921 = VECTOR('',#170922,1.); +#170922 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#170923 = ORIENTED_EDGE('',*,*,#170924,.T.); +#170924 = EDGE_CURVE('',#170917,#170925,#170927,.T.); +#170925 = VERTEX_POINT('',#170926); +#170926 = CARTESIAN_POINT('',(178.377364,-100.946728,1.585)); +#170927 = LINE('',#170928,#170929); +#170928 = CARTESIAN_POINT('',(178.50141,-100.946728,1.585)); +#170929 = VECTOR('',#170930,1.); +#170930 = DIRECTION('',(-1.,0.,0.)); +#170931 = ORIENTED_EDGE('',*,*,#170932,.T.); +#170932 = EDGE_CURVE('',#170925,#170933,#170935,.T.); +#170933 = VERTEX_POINT('',#170934); +#170934 = CARTESIAN_POINT('',(178.375923,-101.362551,1.585)); +#170935 = LINE('',#170936,#170937); +#170936 = CARTESIAN_POINT('',(178.377364,-100.946728,1.585)); +#170937 = VECTOR('',#170938,1.); +#170938 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#170939 = ORIENTED_EDGE('',*,*,#170940,.T.); +#170940 = EDGE_CURVE('',#170933,#170941,#170943,.T.); +#170941 = VERTEX_POINT('',#170942); +#170942 = CARTESIAN_POINT('',(178.227364,-101.347919,1.585)); +#170943 = CIRCLE('',#170944,7.500006711464E-02); +#170944 = AXIS2_PLACEMENT_3D('',#170945,#170946,#170947); +#170945 = CARTESIAN_POINT('',(178.30236406711,-101.3479190671,1.585)); +#170946 = DIRECTION('',(-0.,0.,-1.)); +#170947 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#170948 = ORIENTED_EDGE('',*,*,#170949,.T.); +#170949 = EDGE_CURVE('',#170941,#170847,#170950,.T.); +#170950 = LINE('',#170951,#170952); +#170951 = CARTESIAN_POINT('',(178.227364,-101.347919,1.585)); +#170952 = VECTOR('',#170953,1.); +#170953 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#170954 = FACE_BOUND('',#170955,.F.); +#170955 = EDGE_LOOP('',(#170956,#170967,#170975,#170983,#170991,#171000) + ); +#170956 = ORIENTED_EDGE('',*,*,#170957,.T.); +#170957 = EDGE_CURVE('',#170958,#170960,#170962,.T.); +#170958 = VERTEX_POINT('',#170959); +#170959 = CARTESIAN_POINT('',(178.798792,-100.5561,1.585)); +#170960 = VERTEX_POINT('',#170961); +#170961 = CARTESIAN_POINT('',(178.665611,-100.422919,1.585)); +#170962 = CIRCLE('',#170963,0.18686440374); +#170963 = AXIS2_PLACEMENT_3D('',#170964,#170965,#170966); +#170964 = CARTESIAN_POINT('',(178.618075,-100.603636,1.585)); +#170965 = DIRECTION('',(0.,0.,1.)); +#170966 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#170967 = ORIENTED_EDGE('',*,*,#170968,.T.); +#170968 = EDGE_CURVE('',#170960,#170969,#170971,.T.); +#170969 = VERTEX_POINT('',#170970); +#170970 = CARTESIAN_POINT('',(178.377364,-100.422919,1.585)); +#170971 = LINE('',#170972,#170973); +#170972 = CARTESIAN_POINT('',(178.665611,-100.422919,1.585)); +#170973 = VECTOR('',#170974,1.); +#170974 = DIRECTION('',(-1.,0.,0.)); +#170975 = ORIENTED_EDGE('',*,*,#170976,.T.); +#170976 = EDGE_CURVE('',#170969,#170977,#170979,.T.); +#170977 = VERTEX_POINT('',#170978); +#170978 = CARTESIAN_POINT('',(178.377364,-100.796728,1.585)); +#170979 = LINE('',#170980,#170981); +#170980 = CARTESIAN_POINT('',(178.377364,-100.422919,1.585)); +#170981 = VECTOR('',#170982,1.); +#170982 = DIRECTION('',(0.,-1.,0.)); +#170983 = ORIENTED_EDGE('',*,*,#170984,.T.); +#170984 = EDGE_CURVE('',#170977,#170985,#170987,.T.); +#170985 = VERTEX_POINT('',#170986); +#170986 = CARTESIAN_POINT('',(178.665611,-100.796728,1.585)); +#170987 = LINE('',#170988,#170989); +#170988 = CARTESIAN_POINT('',(178.377364,-100.796728,1.585)); +#170989 = VECTOR('',#170990,1.); +#170990 = DIRECTION('',(1.,0.,0.)); +#170991 = ORIENTED_EDGE('',*,*,#170992,.T.); +#170992 = EDGE_CURVE('',#170985,#170993,#170995,.T.); +#170993 = VERTEX_POINT('',#170994); +#170994 = CARTESIAN_POINT('',(178.798792,-100.663547,1.585)); +#170995 = CIRCLE('',#170996,0.18686440374); +#170996 = AXIS2_PLACEMENT_3D('',#170997,#170998,#170999); +#170997 = CARTESIAN_POINT('',(178.618075,-100.616011,1.585)); +#170998 = DIRECTION('',(0.,0.,1.)); +#170999 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#171000 = ORIENTED_EDGE('',*,*,#171001,.T.); +#171001 = EDGE_CURVE('',#170993,#170958,#171002,.T.); +#171002 = LINE('',#171003,#171004); +#171003 = CARTESIAN_POINT('',(178.798792,-100.663547,1.585)); +#171004 = VECTOR('',#171005,1.); +#171005 = DIRECTION('',(0.,1.,0.)); +#171006 = PLANE('',#171007); +#171007 = AXIS2_PLACEMENT_3D('',#171008,#171009,#171010); +#171008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171009 = DIRECTION('',(0.,0.,1.)); +#171010 = DIRECTION('',(1.,0.,-0.)); +#171011 = SHELL_BASED_SURFACE_MODEL('',(#171012)); +#171012 = OPEN_SHELL('',(#171013)); +#171013 = ADVANCED_FACE('',(#171014),#171299,.T.); +#171014 = FACE_BOUND('',#171015,.F.); +#171015 = EDGE_LOOP('',(#171016,#171026,#171034,#171042,#171051,#171059, + #171067,#171075,#171083,#171091,#171099,#171107,#171115,#171123, + #171131,#171139,#171147,#171155,#171163,#171172,#171180,#171189, + #171197,#171205,#171213,#171221,#171229,#171237,#171245,#171253, + #171261,#171269,#171277,#171285,#171293)); +#171016 = ORIENTED_EDGE('',*,*,#171017,.T.); +#171017 = EDGE_CURVE('',#171018,#171020,#171022,.T.); +#171018 = VERTEX_POINT('',#171019); +#171019 = CARTESIAN_POINT('',(97.452157,-100.661789,1.585)); +#171020 = VERTEX_POINT('',#171021); +#171021 = CARTESIAN_POINT('',(97.566304,-100.607693,1.585)); +#171022 = LINE('',#171023,#171024); +#171023 = CARTESIAN_POINT('',(97.452157,-100.661789,1.585)); +#171024 = VECTOR('',#171025,1.); +#171025 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#171026 = ORIENTED_EDGE('',*,*,#171027,.T.); +#171027 = EDGE_CURVE('',#171020,#171028,#171030,.T.); +#171028 = VERTEX_POINT('',#171029); +#171029 = CARTESIAN_POINT('',(97.738425,-100.607693,1.585)); +#171030 = LINE('',#171031,#171032); +#171031 = CARTESIAN_POINT('',(97.566304,-100.607693,1.585)); +#171032 = VECTOR('',#171033,1.); +#171033 = DIRECTION('',(1.,0.,0.)); +#171034 = ORIENTED_EDGE('',*,*,#171035,.T.); +#171035 = EDGE_CURVE('',#171028,#171036,#171038,.T.); +#171036 = VERTEX_POINT('',#171037); +#171037 = CARTESIAN_POINT('',(97.865015,-100.669621,1.585)); +#171038 = LINE('',#171039,#171040); +#171039 = CARTESIAN_POINT('',(97.738425,-100.607693,1.585)); +#171040 = VECTOR('',#171041,1.); +#171041 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#171042 = ORIENTED_EDGE('',*,*,#171043,.T.); +#171043 = EDGE_CURVE('',#171036,#171044,#171046,.T.); +#171044 = VERTEX_POINT('',#171045); +#171045 = CARTESIAN_POINT('',(97.78549,-100.795953,1.585)); +#171046 = CIRCLE('',#171047,7.500029440362E-02); +#171047 = AXIS2_PLACEMENT_3D('',#171048,#171049,#171050); +#171048 = CARTESIAN_POINT('',(97.819031053971,-100.7288706486,1.585)); +#171049 = DIRECTION('',(0.,0.,-1.)); +#171050 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#171051 = ORIENTED_EDGE('',*,*,#171052,.T.); +#171052 = EDGE_CURVE('',#171044,#171053,#171055,.T.); +#171053 = VERTEX_POINT('',#171054); +#171054 = CARTESIAN_POINT('',(97.706088,-100.756252,1.585)); +#171055 = LINE('',#171056,#171057); +#171056 = CARTESIAN_POINT('',(97.78549,-100.795953,1.585)); +#171057 = VECTOR('',#171058,1.); +#171058 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#171059 = ORIENTED_EDGE('',*,*,#171060,.T.); +#171060 = EDGE_CURVE('',#171053,#171061,#171063,.T.); +#171061 = VERTEX_POINT('',#171062); +#171062 = CARTESIAN_POINT('',(97.598641,-100.756252,1.585)); +#171063 = LINE('',#171064,#171065); +#171064 = CARTESIAN_POINT('',(97.706088,-100.756252,1.585)); +#171065 = VECTOR('',#171066,1.); +#171066 = DIRECTION('',(-1.,0.,0.)); +#171067 = ORIENTED_EDGE('',*,*,#171068,.T.); +#171068 = EDGE_CURVE('',#171061,#171069,#171071,.T.); +#171069 = VERTEX_POINT('',#171070); +#171070 = CARTESIAN_POINT('',(97.541599,-100.784772,1.585)); +#171071 = LINE('',#171072,#171073); +#171072 = CARTESIAN_POINT('',(97.598641,-100.756252,1.585)); +#171073 = VECTOR('',#171074,1.); +#171074 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#171075 = ORIENTED_EDGE('',*,*,#171076,.T.); +#171076 = EDGE_CURVE('',#171069,#171077,#171079,.T.); +#171077 = VERTEX_POINT('',#171078); +#171078 = CARTESIAN_POINT('',(97.513079,-100.841814,1.585)); +#171079 = LINE('',#171080,#171081); +#171080 = CARTESIAN_POINT('',(97.541599,-100.784772,1.585)); +#171081 = VECTOR('',#171082,1.); +#171082 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#171083 = ORIENTED_EDGE('',*,*,#171084,.T.); +#171084 = EDGE_CURVE('',#171077,#171085,#171087,.T.); +#171085 = VERTEX_POINT('',#171086); +#171086 = CARTESIAN_POINT('',(97.513079,-100.854023,1.585)); +#171087 = LINE('',#171088,#171089); +#171088 = CARTESIAN_POINT('',(97.513079,-100.841814,1.585)); +#171089 = VECTOR('',#171090,1.); +#171090 = DIRECTION('',(0.,-1.,0.)); +#171091 = ORIENTED_EDGE('',*,*,#171092,.T.); +#171092 = EDGE_CURVE('',#171085,#171093,#171095,.T.); +#171093 = VERTEX_POINT('',#171094); +#171094 = CARTESIAN_POINT('',(97.541599,-100.911064,1.585)); +#171095 = LINE('',#171096,#171097); +#171096 = CARTESIAN_POINT('',(97.513079,-100.854023,1.585)); +#171097 = VECTOR('',#171098,1.); +#171098 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#171099 = ORIENTED_EDGE('',*,*,#171100,.T.); +#171100 = EDGE_CURVE('',#171093,#171101,#171103,.T.); +#171101 = VERTEX_POINT('',#171102); +#171102 = CARTESIAN_POINT('',(97.598641,-100.939585,1.585)); +#171103 = LINE('',#171104,#171105); +#171104 = CARTESIAN_POINT('',(97.541599,-100.911064,1.585)); +#171105 = VECTOR('',#171106,1.); +#171106 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#171107 = ORIENTED_EDGE('',*,*,#171108,.T.); +#171108 = EDGE_CURVE('',#171101,#171109,#171111,.T.); +#171109 = VERTEX_POINT('',#171110); +#171110 = CARTESIAN_POINT('',(97.743602,-100.942248,1.585)); +#171111 = LINE('',#171112,#171113); +#171112 = CARTESIAN_POINT('',(97.598641,-100.939585,1.585)); +#171113 = VECTOR('',#171114,1.); +#171114 = DIRECTION('',(0.999831305828,-1.836735927203E-02,0.)); +#171115 = ORIENTED_EDGE('',*,*,#171116,.T.); +#171116 = EDGE_CURVE('',#171109,#171117,#171119,.T.); +#171117 = VERTEX_POINT('',#171118); +#171118 = CARTESIAN_POINT('',(97.865015,-101.002954,1.585)); +#171119 = LINE('',#171120,#171121); +#171120 = CARTESIAN_POINT('',(97.743602,-100.942248,1.585)); +#171121 = VECTOR('',#171122,1.); +#171122 = DIRECTION('',(0.894428664361,-0.447210648766,0.)); +#171123 = ORIENTED_EDGE('',*,*,#171124,.T.); +#171124 = EDGE_CURVE('',#171117,#171125,#171127,.T.); +#171125 = VERTEX_POINT('',#171126); +#171126 = CARTESIAN_POINT('',(97.886113,-101.028663,1.585)); +#171127 = LINE('',#171128,#171129); +#171128 = CARTESIAN_POINT('',(97.865015,-101.002954,1.585)); +#171129 = VECTOR('',#171130,1.); +#171130 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#171131 = ORIENTED_EDGE('',*,*,#171132,.T.); +#171132 = EDGE_CURVE('',#171125,#171133,#171135,.T.); +#171133 = VERTEX_POINT('',#171134); +#171134 = CARTESIAN_POINT('',(97.940209,-101.14281,1.585)); +#171135 = LINE('',#171136,#171137); +#171136 = CARTESIAN_POINT('',(97.886113,-101.028663,1.585)); +#171137 = VECTOR('',#171138,1.); +#171138 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#171139 = ORIENTED_EDGE('',*,*,#171140,.T.); +#171140 = EDGE_CURVE('',#171133,#171141,#171143,.T.); +#171141 = VERTEX_POINT('',#171142); +#171142 = CARTESIAN_POINT('',(97.938987,-101.22487,1.585)); +#171143 = LINE('',#171144,#171145); +#171144 = CARTESIAN_POINT('',(97.940209,-101.14281,1.585)); +#171145 = VECTOR('',#171146,1.); +#171146 = DIRECTION('',(-1.488989188842E-02,-0.999889139415,0.)); +#171147 = ORIENTED_EDGE('',*,*,#171148,.T.); +#171148 = EDGE_CURVE('',#171141,#171149,#171151,.T.); +#171149 = VERTEX_POINT('',#171150); +#171150 = CARTESIAN_POINT('',(97.878281,-101.346284,1.585)); +#171151 = LINE('',#171152,#171153); +#171152 = CARTESIAN_POINT('',(97.938987,-101.22487,1.585)); +#171153 = VECTOR('',#171154,1.); +#171154 = DIRECTION('',(-0.447207702067,-0.894430137692,0.)); +#171155 = ORIENTED_EDGE('',*,*,#171156,.T.); +#171156 = EDGE_CURVE('',#171149,#171157,#171159,.T.); +#171157 = VERTEX_POINT('',#171158); +#171158 = CARTESIAN_POINT('',(97.852572,-101.367382,1.585)); +#171159 = LINE('',#171160,#171161); +#171160 = CARTESIAN_POINT('',(97.878281,-101.346284,1.585)); +#171161 = VECTOR('',#171162,1.); +#171162 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#171163 = ORIENTED_EDGE('',*,*,#171164,.T.); +#171164 = EDGE_CURVE('',#171157,#171165,#171167,.T.); +#171165 = VERTEX_POINT('',#171166); +#171166 = CARTESIAN_POINT('',(97.392095,-101.35955,1.585)); +#171167 = CIRCLE('',#171168,0.396588066051); +#171168 = AXIS2_PLACEMENT_3D('',#171169,#171170,#171171); +#171169 = CARTESIAN_POINT('',(97.62782453893,-101.04062418,1.585)); +#171170 = DIRECTION('',(-0.,0.,-1.)); +#171171 = DIRECTION('',(0.566702531691,-0.82392247243,-0.)); +#171172 = ORIENTED_EDGE('',*,*,#171173,.T.); +#171173 = EDGE_CURVE('',#171165,#171174,#171176,.T.); +#171174 = VERTEX_POINT('',#171175); +#171175 = CARTESIAN_POINT('',(97.372922,-101.337442,1.585)); +#171176 = LINE('',#171177,#171178); +#171177 = CARTESIAN_POINT('',(97.392095,-101.35955,1.585)); +#171178 = VECTOR('',#171179,1.); +#171179 = DIRECTION('',(-0.655178986933,0.755473689205,0.)); +#171180 = ORIENTED_EDGE('',*,*,#171181,.T.); +#171181 = EDGE_CURVE('',#171174,#171182,#171184,.T.); +#171182 = VERTEX_POINT('',#171183); +#171183 = CARTESIAN_POINT('',(97.47162,-101.233218,1.585)); +#171184 = CIRCLE('',#171185,7.499954050662E-02); +#171185 = AXIS2_PLACEMENT_3D('',#171186,#171187,#171188); +#171186 = CARTESIAN_POINT('',(97.438078288962,-101.3002991799,1.585)); +#171187 = DIRECTION('',(0.,0.,-1.)); +#171188 = DIRECTION('',(-0.868755841989,-0.495240635459,-0.)); +#171189 = ORIENTED_EDGE('',*,*,#171190,.T.); +#171190 = EDGE_CURVE('',#171182,#171191,#171193,.T.); +#171191 = VERTEX_POINT('',#171192); +#171192 = CARTESIAN_POINT('',(97.551022,-101.272919,1.585)); +#171193 = LINE('',#171194,#171195); +#171194 = CARTESIAN_POINT('',(97.47162,-101.233218,1.585)); +#171195 = VECTOR('',#171196,1.); +#171196 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#171197 = ORIENTED_EDGE('',*,*,#171198,.T.); +#171198 = EDGE_CURVE('',#171191,#171199,#171201,.T.); +#171199 = VERTEX_POINT('',#171200); +#171200 = CARTESIAN_POINT('',(97.706088,-101.272919,1.585)); +#171201 = LINE('',#171202,#171203); +#171202 = CARTESIAN_POINT('',(97.551022,-101.272919,1.585)); +#171203 = VECTOR('',#171204,1.); +#171204 = DIRECTION('',(1.,0.,0.)); +#171205 = ORIENTED_EDGE('',*,*,#171206,.T.); +#171206 = EDGE_CURVE('',#171199,#171207,#171209,.T.); +#171207 = VERTEX_POINT('',#171208); +#171208 = CARTESIAN_POINT('',(97.763129,-101.244398,1.585)); +#171209 = LINE('',#171210,#171211); +#171210 = CARTESIAN_POINT('',(97.706088,-101.272919,1.585)); +#171211 = VECTOR('',#171212,1.); +#171212 = DIRECTION('',(0.894424054904,0.447219867637,0.)); +#171213 = ORIENTED_EDGE('',*,*,#171214,.T.); +#171214 = EDGE_CURVE('',#171207,#171215,#171217,.T.); +#171215 = VERTEX_POINT('',#171216); +#171216 = CARTESIAN_POINT('',(97.79165,-101.187356,1.585)); +#171217 = LINE('',#171218,#171219); +#171218 = CARTESIAN_POINT('',(97.763129,-101.244398,1.585)); +#171219 = VECTOR('',#171220,1.); +#171220 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#171221 = ORIENTED_EDGE('',*,*,#171222,.T.); +#171222 = EDGE_CURVE('',#171215,#171223,#171225,.T.); +#171223 = VERTEX_POINT('',#171224); +#171224 = CARTESIAN_POINT('',(97.79165,-101.175147,1.585)); +#171225 = LINE('',#171226,#171227); +#171226 = CARTESIAN_POINT('',(97.79165,-101.187356,1.585)); +#171227 = VECTOR('',#171228,1.); +#171228 = DIRECTION('',(0.,1.,0.)); +#171229 = ORIENTED_EDGE('',*,*,#171230,.T.); +#171230 = EDGE_CURVE('',#171223,#171231,#171233,.T.); +#171231 = VERTEX_POINT('',#171232); +#171232 = CARTESIAN_POINT('',(97.763129,-101.118105,1.585)); +#171233 = LINE('',#171234,#171235); +#171234 = CARTESIAN_POINT('',(97.79165,-101.175147,1.585)); +#171235 = VECTOR('',#171236,1.); +#171236 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#171237 = ORIENTED_EDGE('',*,*,#171238,.T.); +#171238 = EDGE_CURVE('',#171231,#171239,#171241,.T.); +#171239 = VERTEX_POINT('',#171240); +#171240 = CARTESIAN_POINT('',(97.706088,-101.089585,1.585)); +#171241 = LINE('',#171242,#171243); +#171242 = CARTESIAN_POINT('',(97.763129,-101.118105,1.585)); +#171243 = VECTOR('',#171244,1.); +#171244 = DIRECTION('',(-0.894430327074,0.447207323296,0.)); +#171245 = ORIENTED_EDGE('',*,*,#171246,.T.); +#171246 = EDGE_CURVE('',#171239,#171247,#171249,.T.); +#171247 = VERTEX_POINT('',#171248); +#171248 = CARTESIAN_POINT('',(97.561126,-101.086922,1.585)); +#171249 = LINE('',#171250,#171251); +#171250 = CARTESIAN_POINT('',(97.706088,-101.089585,1.585)); +#171251 = VECTOR('',#171252,1.); +#171252 = DIRECTION('',(-0.999831308155,1.836723261002E-02,0.)); +#171253 = ORIENTED_EDGE('',*,*,#171254,.T.); +#171254 = EDGE_CURVE('',#171247,#171255,#171257,.T.); +#171255 = VERTEX_POINT('',#171256); +#171256 = CARTESIAN_POINT('',(97.439714,-101.026216,1.585)); +#171257 = LINE('',#171258,#171259); +#171258 = CARTESIAN_POINT('',(97.561126,-101.086922,1.585)); +#171259 = VECTOR('',#171260,1.); +#171260 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#171261 = ORIENTED_EDGE('',*,*,#171262,.T.); +#171262 = EDGE_CURVE('',#171255,#171263,#171265,.T.); +#171263 = VERTEX_POINT('',#171264); +#171264 = CARTESIAN_POINT('',(97.418616,-101.000507,1.585)); +#171265 = LINE('',#171266,#171267); +#171266 = CARTESIAN_POINT('',(97.439714,-101.026216,1.585)); +#171267 = VECTOR('',#171268,1.); +#171268 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#171269 = ORIENTED_EDGE('',*,*,#171270,.T.); +#171270 = EDGE_CURVE('',#171263,#171271,#171273,.T.); +#171271 = VERTEX_POINT('',#171272); +#171272 = CARTESIAN_POINT('',(97.36452,-100.88636,1.585)); +#171273 = LINE('',#171274,#171275); +#171274 = CARTESIAN_POINT('',(97.418616,-101.000507,1.585)); +#171275 = VECTOR('',#171276,1.); +#171276 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#171277 = ORIENTED_EDGE('',*,*,#171278,.T.); +#171278 = EDGE_CURVE('',#171271,#171279,#171281,.T.); +#171279 = VERTEX_POINT('',#171280); +#171280 = CARTESIAN_POINT('',(97.365742,-100.8043,1.585)); +#171281 = LINE('',#171282,#171283); +#171282 = CARTESIAN_POINT('',(97.36452,-100.88636,1.585)); +#171283 = VECTOR('',#171284,1.); +#171284 = DIRECTION('',(1.488989188842E-02,0.999889139415,0.)); +#171285 = ORIENTED_EDGE('',*,*,#171286,.T.); +#171286 = EDGE_CURVE('',#171279,#171287,#171289,.T.); +#171287 = VERTEX_POINT('',#171288); +#171288 = CARTESIAN_POINT('',(97.426448,-100.682887,1.585)); +#171289 = LINE('',#171290,#171291); +#171290 = CARTESIAN_POINT('',(97.365742,-100.8043,1.585)); +#171291 = VECTOR('',#171292,1.); +#171292 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#171293 = ORIENTED_EDGE('',*,*,#171294,.T.); +#171294 = EDGE_CURVE('',#171287,#171018,#171295,.T.); +#171295 = LINE('',#171296,#171297); +#171296 = CARTESIAN_POINT('',(97.426448,-100.682887,1.585)); +#171297 = VECTOR('',#171298,1.); +#171298 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#171299 = PLANE('',#171300); +#171300 = AXIS2_PLACEMENT_3D('',#171301,#171302,#171303); +#171301 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171302 = DIRECTION('',(0.,0.,1.)); +#171303 = DIRECTION('',(1.,0.,-0.)); +#171304 = SHELL_BASED_SURFACE_MODEL('',(#171305)); +#171305 = OPEN_SHELL('',(#171306)); +#171306 = ADVANCED_FACE('',(#171307),#171502,.T.); +#171307 = FACE_BOUND('',#171308,.F.); +#171308 = EDGE_LOOP('',(#171309,#171320,#171328,#171337,#171345,#171353, + #171361,#171369,#171378,#171386,#171395,#171403,#171411,#171419, + #171428,#171436,#171445,#171453,#171462,#171470,#171479,#171487, + #171496)); +#171309 = ORIENTED_EDGE('',*,*,#171310,.T.); +#171310 = EDGE_CURVE('',#171311,#171313,#171315,.T.); +#171311 = VERTEX_POINT('',#171312); +#171312 = CARTESIAN_POINT('',(104.580626,-100.32604,1.585)); +#171313 = VERTEX_POINT('',#171314); +#171314 = CARTESIAN_POINT('',(104.652364,-100.272919,1.585)); +#171315 = CIRCLE('',#171316,7.50033610077E-02); +#171316 = AXIS2_PLACEMENT_3D('',#171317,#171318,#171319); +#171317 = CARTESIAN_POINT('',(104.6523662707,-100.3479223609,1.585)); +#171318 = DIRECTION('',(0.,0.,-1.)); +#171319 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#171320 = ORIENTED_EDGE('',*,*,#171321,.T.); +#171321 = EDGE_CURVE('',#171313,#171322,#171324,.T.); +#171322 = VERTEX_POINT('',#171323); +#171323 = CARTESIAN_POINT('',(105.143186,-100.27436,1.585)); +#171324 = LINE('',#171325,#171326); +#171325 = CARTESIAN_POINT('',(104.652364,-100.272919,1.585)); +#171326 = VECTOR('',#171327,1.); +#171327 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#171328 = ORIENTED_EDGE('',*,*,#171329,.T.); +#171329 = EDGE_CURVE('',#171322,#171330,#171332,.T.); +#171330 = VERTEX_POINT('',#171331); +#171331 = CARTESIAN_POINT('',(105.128554,-100.422919,1.585)); +#171332 = CIRCLE('',#171333,7.500006711464E-02); +#171333 = AXIS2_PLACEMENT_3D('',#171334,#171335,#171336); +#171334 = CARTESIAN_POINT('',(105.12855406711,-100.3479189328,1.585)); +#171335 = DIRECTION('',(0.,0.,-1.)); +#171336 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#171337 = ORIENTED_EDGE('',*,*,#171338,.T.); +#171338 = EDGE_CURVE('',#171330,#171339,#171341,.T.); +#171339 = VERTEX_POINT('',#171340); +#171340 = CARTESIAN_POINT('',(104.720238,-100.422919,1.585)); +#171341 = LINE('',#171342,#171343); +#171342 = CARTESIAN_POINT('',(105.128554,-100.422919,1.585)); +#171343 = VECTOR('',#171344,1.); +#171344 = DIRECTION('',(-1.,0.,0.)); +#171345 = ORIENTED_EDGE('',*,*,#171346,.T.); +#171346 = EDGE_CURVE('',#171339,#171347,#171349,.T.); +#171347 = VERTEX_POINT('',#171348); +#171348 = CARTESIAN_POINT('',(104.695419,-100.671109,1.585)); +#171349 = LINE('',#171350,#171351); +#171350 = CARTESIAN_POINT('',(104.720238,-100.422919,1.585)); +#171351 = VECTOR('',#171352,1.); +#171352 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#171353 = ORIENTED_EDGE('',*,*,#171354,.T.); +#171354 = EDGE_CURVE('',#171347,#171355,#171357,.T.); +#171355 = VERTEX_POINT('',#171356); +#171356 = CARTESIAN_POINT('',(104.73297,-100.655312,1.585)); +#171357 = LINE('',#171358,#171359); +#171358 = CARTESIAN_POINT('',(104.695419,-100.671109,1.585)); +#171359 = VECTOR('',#171360,1.); +#171360 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#171361 = ORIENTED_EDGE('',*,*,#171362,.T.); +#171362 = EDGE_CURVE('',#171355,#171363,#171365,.T.); +#171363 = VERTEX_POINT('',#171364); +#171364 = CARTESIAN_POINT('',(105.005506,-100.656534,1.585)); +#171365 = LINE('',#171366,#171367); +#171366 = CARTESIAN_POINT('',(104.73297,-100.655312,1.585)); +#171367 = VECTOR('',#171368,1.); +#171368 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#171369 = ORIENTED_EDGE('',*,*,#171370,.T.); +#171370 = EDGE_CURVE('',#171363,#171371,#171373,.T.); +#171371 = VERTEX_POINT('',#171372); +#171372 = CARTESIAN_POINT('',(105.249732,-100.904715,1.585)); +#171373 = CIRCLE('',#171374,0.348625649748); +#171374 = AXIS2_PLACEMENT_3D('',#171375,#171376,#171377); +#171375 = CARTESIAN_POINT('',(104.91233404586,-100.9924786838,1.585)); +#171376 = DIRECTION('',(0.,0.,-1.)); +#171377 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#171378 = ORIENTED_EDGE('',*,*,#171379,.T.); +#171379 = EDGE_CURVE('',#171371,#171380,#171382,.T.); +#171380 = VERTEX_POINT('',#171381); +#171381 = CARTESIAN_POINT('',(105.24851,-101.177252,1.585)); +#171382 = LINE('',#171383,#171384); +#171383 = CARTESIAN_POINT('',(105.249732,-100.904715,1.585)); +#171384 = VECTOR('',#171385,1.); +#171385 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#171386 = ORIENTED_EDGE('',*,*,#171387,.T.); +#171387 = EDGE_CURVE('',#171380,#171388,#171390,.T.); +#171388 = VERTEX_POINT('',#171389); +#171389 = CARTESIAN_POINT('',(105.000329,-101.421478,1.585)); +#171390 = CIRCLE('',#171391,0.348635327447); +#171391 = AXIS2_PLACEMENT_3D('',#171392,#171393,#171394); +#171392 = CARTESIAN_POINT('',(104.91255748129,-101.0840720841,1.585)); +#171393 = DIRECTION('',(0.,0.,-1.)); +#171394 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#171395 = ORIENTED_EDGE('',*,*,#171396,.T.); +#171396 = EDGE_CURVE('',#171388,#171397,#171399,.T.); +#171397 = VERTEX_POINT('',#171398); +#171398 = CARTESIAN_POINT('',(104.727792,-101.420256,1.585)); +#171399 = LINE('',#171400,#171401); +#171400 = CARTESIAN_POINT('',(105.000329,-101.421478,1.585)); +#171401 = VECTOR('',#171402,1.); +#171402 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#171403 = ORIENTED_EDGE('',*,*,#171404,.T.); +#171404 = EDGE_CURVE('',#171397,#171405,#171407,.T.); +#171405 = VERTEX_POINT('',#171406); +#171406 = CARTESIAN_POINT('',(104.605079,-101.35805,1.585)); +#171407 = LINE('',#171408,#171409); +#171408 = CARTESIAN_POINT('',(104.727792,-101.420256,1.585)); +#171409 = VECTOR('',#171410,1.); +#171410 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#171411 = ORIENTED_EDGE('',*,*,#171412,.T.); +#171412 = EDGE_CURVE('',#171405,#171413,#171415,.T.); +#171413 = VERTEX_POINT('',#171414); +#171414 = CARTESIAN_POINT('',(104.542384,-101.294347,1.585)); +#171415 = LINE('',#171416,#171417); +#171416 = CARTESIAN_POINT('',(104.605079,-101.35805,1.585)); +#171417 = VECTOR('',#171418,1.); +#171418 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#171419 = ORIENTED_EDGE('',*,*,#171420,.T.); +#171420 = EDGE_CURVE('',#171413,#171421,#171423,.T.); +#171421 = VERTEX_POINT('',#171422); +#171422 = CARTESIAN_POINT('',(104.657779,-101.199648,1.585)); +#171423 = CIRCLE('',#171424,7.50001266804E-02); +#171424 = AXIS2_PLACEMENT_3D('',#171425,#171426,#171427); +#171425 = CARTESIAN_POINT('',(104.60474505199,-101.2526802483,1.585)); +#171426 = DIRECTION('',(0.,0.,-1.)); +#171427 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#171428 = ORIENTED_EDGE('',*,*,#171429,.T.); +#171429 = EDGE_CURVE('',#171421,#171430,#171432,.T.); +#171430 = VERTEX_POINT('',#171431); +#171431 = CARTESIAN_POINT('',(104.696791,-101.238661,1.585)); +#171432 = LINE('',#171433,#171434); +#171433 = CARTESIAN_POINT('',(104.657779,-101.199648,1.585)); +#171434 = VECTOR('',#171435,1.); +#171435 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#171436 = ORIENTED_EDGE('',*,*,#171437,.T.); +#171437 = EDGE_CURVE('',#171430,#171438,#171440,.T.); +#171438 = VERTEX_POINT('',#171439); +#171439 = CARTESIAN_POINT('',(105.036507,-101.238661,1.585)); +#171440 = CIRCLE('',#171441,0.305620374329); +#171441 = AXIS2_PLACEMENT_3D('',#171442,#171443,#171444); +#171442 = CARTESIAN_POINT('',(104.866649,-100.98459,1.585)); +#171443 = DIRECTION('',(0.,0.,1.)); +#171444 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#171445 = ORIENTED_EDGE('',*,*,#171446,.T.); +#171446 = EDGE_CURVE('',#171438,#171447,#171449,.T.); +#171447 = VERTEX_POINT('',#171448); +#171448 = CARTESIAN_POINT('',(105.066914,-101.208253,1.585)); +#171449 = LINE('',#171450,#171451); +#171450 = CARTESIAN_POINT('',(105.036507,-101.238661,1.585)); +#171451 = VECTOR('',#171452,1.); +#171452 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#171453 = ORIENTED_EDGE('',*,*,#171454,.T.); +#171454 = EDGE_CURVE('',#171447,#171455,#171457,.T.); +#171455 = VERTEX_POINT('',#171456); +#171456 = CARTESIAN_POINT('',(105.066915,-100.868536,1.585)); +#171457 = CIRCLE('',#171458,0.305616146029); +#171458 = AXIS2_PLACEMENT_3D('',#171459,#171460,#171461); +#171459 = CARTESIAN_POINT('',(104.81284892049,-101.0383937521,1.585)); +#171460 = DIRECTION('',(0.,-0.,1.)); +#171461 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#171462 = ORIENTED_EDGE('',*,*,#171463,.T.); +#171463 = EDGE_CURVE('',#171455,#171464,#171466,.T.); +#171464 = VERTEX_POINT('',#171465); +#171465 = CARTESIAN_POINT('',(105.036508,-100.838129,1.585)); +#171466 = LINE('',#171467,#171468); +#171467 = CARTESIAN_POINT('',(105.066915,-100.868536,1.585)); +#171468 = VECTOR('',#171469,1.); +#171469 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#171470 = ORIENTED_EDGE('',*,*,#171471,.T.); +#171471 = EDGE_CURVE('',#171464,#171472,#171474,.T.); +#171472 = VERTEX_POINT('',#171473); +#171473 = CARTESIAN_POINT('',(104.696791,-100.838129,1.585)); +#171474 = CIRCLE('',#171475,0.305621483548); +#171475 = AXIS2_PLACEMENT_3D('',#171476,#171477,#171478); +#171476 = CARTESIAN_POINT('',(104.8666495,-101.092201,1.585)); +#171477 = DIRECTION('',(0.,0.,1.)); +#171478 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#171479 = ORIENTED_EDGE('',*,*,#171480,.T.); +#171480 = EDGE_CURVE('',#171472,#171481,#171483,.T.); +#171481 = VERTEX_POINT('',#171482); +#171482 = CARTESIAN_POINT('',(104.640001,-100.890306,1.585)); +#171483 = LINE('',#171484,#171485); +#171484 = CARTESIAN_POINT('',(104.696791,-100.838129,1.585)); +#171485 = VECTOR('',#171486,1.); +#171486 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#171487 = ORIENTED_EDGE('',*,*,#171488,.T.); +#171488 = EDGE_CURVE('',#171481,#171489,#171491,.T.); +#171489 = VERTEX_POINT('',#171490); +#171490 = CARTESIAN_POINT('',(104.530095,-100.831349,1.585)); +#171491 = CIRCLE('',#171492,7.500024172471E-02); +#171492 = AXIS2_PLACEMENT_3D('',#171493,#171494,#171495); +#171493 = CARTESIAN_POINT('',(104.60474497002,-100.8241089561,1.585)); +#171494 = DIRECTION('',(-0.,0.,-1.)); +#171495 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#171496 = ORIENTED_EDGE('',*,*,#171497,.T.); +#171497 = EDGE_CURVE('',#171489,#171311,#171498,.T.); +#171498 = LINE('',#171499,#171500); +#171499 = CARTESIAN_POINT('',(104.530095,-100.831349,1.585)); +#171500 = VECTOR('',#171501,1.); +#171501 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#171502 = PLANE('',#171503); +#171503 = AXIS2_PLACEMENT_3D('',#171504,#171505,#171506); +#171504 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171505 = DIRECTION('',(0.,0.,1.)); +#171506 = DIRECTION('',(1.,0.,-0.)); +#171507 = SHELL_BASED_SURFACE_MODEL('',(#171508)); +#171508 = OPEN_SHELL('',(#171509)); +#171509 = ADVANCED_FACE('',(#171510),#171705,.T.); +#171510 = FACE_BOUND('',#171511,.F.); +#171511 = EDGE_LOOP('',(#171512,#171523,#171531,#171540,#171548,#171556, + #171564,#171572,#171581,#171589,#171598,#171606,#171614,#171622, + #171631,#171639,#171648,#171656,#171665,#171673,#171682,#171690, + #171699)); +#171512 = ORIENTED_EDGE('',*,*,#171513,.T.); +#171513 = EDGE_CURVE('',#171514,#171516,#171518,.T.); +#171514 = VERTEX_POINT('',#171515); +#171515 = CARTESIAN_POINT('',(108.080626,-100.32604,1.585)); +#171516 = VERTEX_POINT('',#171517); +#171517 = CARTESIAN_POINT('',(108.152364,-100.272919,1.585)); +#171518 = CIRCLE('',#171519,7.50033610077E-02); +#171519 = AXIS2_PLACEMENT_3D('',#171520,#171521,#171522); +#171520 = CARTESIAN_POINT('',(108.1523662707,-100.3479223609,1.585)); +#171521 = DIRECTION('',(0.,0.,-1.)); +#171522 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#171523 = ORIENTED_EDGE('',*,*,#171524,.T.); +#171524 = EDGE_CURVE('',#171516,#171525,#171527,.T.); +#171525 = VERTEX_POINT('',#171526); +#171526 = CARTESIAN_POINT('',(108.643186,-100.27436,1.585)); +#171527 = LINE('',#171528,#171529); +#171528 = CARTESIAN_POINT('',(108.152364,-100.272919,1.585)); +#171529 = VECTOR('',#171530,1.); +#171530 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#171531 = ORIENTED_EDGE('',*,*,#171532,.T.); +#171532 = EDGE_CURVE('',#171525,#171533,#171535,.T.); +#171533 = VERTEX_POINT('',#171534); +#171534 = CARTESIAN_POINT('',(108.628554,-100.422919,1.585)); +#171535 = CIRCLE('',#171536,7.500006711464E-02); +#171536 = AXIS2_PLACEMENT_3D('',#171537,#171538,#171539); +#171537 = CARTESIAN_POINT('',(108.62855406711,-100.3479189328,1.585)); +#171538 = DIRECTION('',(0.,0.,-1.)); +#171539 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#171540 = ORIENTED_EDGE('',*,*,#171541,.T.); +#171541 = EDGE_CURVE('',#171533,#171542,#171544,.T.); +#171542 = VERTEX_POINT('',#171543); +#171543 = CARTESIAN_POINT('',(108.220238,-100.422919,1.585)); +#171544 = LINE('',#171545,#171546); +#171545 = CARTESIAN_POINT('',(108.628554,-100.422919,1.585)); +#171546 = VECTOR('',#171547,1.); +#171547 = DIRECTION('',(-1.,0.,0.)); +#171548 = ORIENTED_EDGE('',*,*,#171549,.T.); +#171549 = EDGE_CURVE('',#171542,#171550,#171552,.T.); +#171550 = VERTEX_POINT('',#171551); +#171551 = CARTESIAN_POINT('',(108.195419,-100.671109,1.585)); +#171552 = LINE('',#171553,#171554); +#171553 = CARTESIAN_POINT('',(108.220238,-100.422919,1.585)); +#171554 = VECTOR('',#171555,1.); +#171555 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#171556 = ORIENTED_EDGE('',*,*,#171557,.T.); +#171557 = EDGE_CURVE('',#171550,#171558,#171560,.T.); +#171558 = VERTEX_POINT('',#171559); +#171559 = CARTESIAN_POINT('',(108.23297,-100.655312,1.585)); +#171560 = LINE('',#171561,#171562); +#171561 = CARTESIAN_POINT('',(108.195419,-100.671109,1.585)); +#171562 = VECTOR('',#171563,1.); +#171563 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#171564 = ORIENTED_EDGE('',*,*,#171565,.T.); +#171565 = EDGE_CURVE('',#171558,#171566,#171568,.T.); +#171566 = VERTEX_POINT('',#171567); +#171567 = CARTESIAN_POINT('',(108.505506,-100.656534,1.585)); +#171568 = LINE('',#171569,#171570); +#171569 = CARTESIAN_POINT('',(108.23297,-100.655312,1.585)); +#171570 = VECTOR('',#171571,1.); +#171571 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#171572 = ORIENTED_EDGE('',*,*,#171573,.T.); +#171573 = EDGE_CURVE('',#171566,#171574,#171576,.T.); +#171574 = VERTEX_POINT('',#171575); +#171575 = CARTESIAN_POINT('',(108.749732,-100.904715,1.585)); +#171576 = CIRCLE('',#171577,0.348625649748); +#171577 = AXIS2_PLACEMENT_3D('',#171578,#171579,#171580); +#171578 = CARTESIAN_POINT('',(108.41233404586,-100.9924786838,1.585)); +#171579 = DIRECTION('',(0.,0.,-1.)); +#171580 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#171581 = ORIENTED_EDGE('',*,*,#171582,.T.); +#171582 = EDGE_CURVE('',#171574,#171583,#171585,.T.); +#171583 = VERTEX_POINT('',#171584); +#171584 = CARTESIAN_POINT('',(108.74851,-101.177252,1.585)); +#171585 = LINE('',#171586,#171587); +#171586 = CARTESIAN_POINT('',(108.749732,-100.904715,1.585)); +#171587 = VECTOR('',#171588,1.); +#171588 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#171589 = ORIENTED_EDGE('',*,*,#171590,.T.); +#171590 = EDGE_CURVE('',#171583,#171591,#171593,.T.); +#171591 = VERTEX_POINT('',#171592); +#171592 = CARTESIAN_POINT('',(108.500329,-101.421478,1.585)); +#171593 = CIRCLE('',#171594,0.348635327447); +#171594 = AXIS2_PLACEMENT_3D('',#171595,#171596,#171597); +#171595 = CARTESIAN_POINT('',(108.41255748129,-101.0840720841,1.585)); +#171596 = DIRECTION('',(0.,0.,-1.)); +#171597 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#171598 = ORIENTED_EDGE('',*,*,#171599,.T.); +#171599 = EDGE_CURVE('',#171591,#171600,#171602,.T.); +#171600 = VERTEX_POINT('',#171601); +#171601 = CARTESIAN_POINT('',(108.227792,-101.420256,1.585)); +#171602 = LINE('',#171603,#171604); +#171603 = CARTESIAN_POINT('',(108.500329,-101.421478,1.585)); +#171604 = VECTOR('',#171605,1.); +#171605 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#171606 = ORIENTED_EDGE('',*,*,#171607,.T.); +#171607 = EDGE_CURVE('',#171600,#171608,#171610,.T.); +#171608 = VERTEX_POINT('',#171609); +#171609 = CARTESIAN_POINT('',(108.105079,-101.35805,1.585)); +#171610 = LINE('',#171611,#171612); +#171611 = CARTESIAN_POINT('',(108.227792,-101.420256,1.585)); +#171612 = VECTOR('',#171613,1.); +#171613 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#171614 = ORIENTED_EDGE('',*,*,#171615,.T.); +#171615 = EDGE_CURVE('',#171608,#171616,#171618,.T.); +#171616 = VERTEX_POINT('',#171617); +#171617 = CARTESIAN_POINT('',(108.042384,-101.294347,1.585)); +#171618 = LINE('',#171619,#171620); +#171619 = CARTESIAN_POINT('',(108.105079,-101.35805,1.585)); +#171620 = VECTOR('',#171621,1.); +#171621 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#171622 = ORIENTED_EDGE('',*,*,#171623,.T.); +#171623 = EDGE_CURVE('',#171616,#171624,#171626,.T.); +#171624 = VERTEX_POINT('',#171625); +#171625 = CARTESIAN_POINT('',(108.157779,-101.199648,1.585)); +#171626 = CIRCLE('',#171627,7.50001266804E-02); +#171627 = AXIS2_PLACEMENT_3D('',#171628,#171629,#171630); +#171628 = CARTESIAN_POINT('',(108.10474505199,-101.2526802483,1.585)); +#171629 = DIRECTION('',(0.,0.,-1.)); +#171630 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#171631 = ORIENTED_EDGE('',*,*,#171632,.T.); +#171632 = EDGE_CURVE('',#171624,#171633,#171635,.T.); +#171633 = VERTEX_POINT('',#171634); +#171634 = CARTESIAN_POINT('',(108.196791,-101.238661,1.585)); +#171635 = LINE('',#171636,#171637); +#171636 = CARTESIAN_POINT('',(108.157779,-101.199648,1.585)); +#171637 = VECTOR('',#171638,1.); +#171638 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#171639 = ORIENTED_EDGE('',*,*,#171640,.T.); +#171640 = EDGE_CURVE('',#171633,#171641,#171643,.T.); +#171641 = VERTEX_POINT('',#171642); +#171642 = CARTESIAN_POINT('',(108.536507,-101.238661,1.585)); +#171643 = CIRCLE('',#171644,0.305620374329); +#171644 = AXIS2_PLACEMENT_3D('',#171645,#171646,#171647); +#171645 = CARTESIAN_POINT('',(108.366649,-100.98459,1.585)); +#171646 = DIRECTION('',(0.,0.,1.)); +#171647 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#171648 = ORIENTED_EDGE('',*,*,#171649,.T.); +#171649 = EDGE_CURVE('',#171641,#171650,#171652,.T.); +#171650 = VERTEX_POINT('',#171651); +#171651 = CARTESIAN_POINT('',(108.566914,-101.208253,1.585)); +#171652 = LINE('',#171653,#171654); +#171653 = CARTESIAN_POINT('',(108.536507,-101.238661,1.585)); +#171654 = VECTOR('',#171655,1.); +#171655 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#171656 = ORIENTED_EDGE('',*,*,#171657,.T.); +#171657 = EDGE_CURVE('',#171650,#171658,#171660,.T.); +#171658 = VERTEX_POINT('',#171659); +#171659 = CARTESIAN_POINT('',(108.566915,-100.868536,1.585)); +#171660 = CIRCLE('',#171661,0.305616146029); +#171661 = AXIS2_PLACEMENT_3D('',#171662,#171663,#171664); +#171662 = CARTESIAN_POINT('',(108.31284892049,-101.0383937521,1.585)); +#171663 = DIRECTION('',(0.,-0.,1.)); +#171664 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#171665 = ORIENTED_EDGE('',*,*,#171666,.T.); +#171666 = EDGE_CURVE('',#171658,#171667,#171669,.T.); +#171667 = VERTEX_POINT('',#171668); +#171668 = CARTESIAN_POINT('',(108.536508,-100.838129,1.585)); +#171669 = LINE('',#171670,#171671); +#171670 = CARTESIAN_POINT('',(108.566915,-100.868536,1.585)); +#171671 = VECTOR('',#171672,1.); +#171672 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#171673 = ORIENTED_EDGE('',*,*,#171674,.T.); +#171674 = EDGE_CURVE('',#171667,#171675,#171677,.T.); +#171675 = VERTEX_POINT('',#171676); +#171676 = CARTESIAN_POINT('',(108.196791,-100.838129,1.585)); +#171677 = CIRCLE('',#171678,0.305621483548); +#171678 = AXIS2_PLACEMENT_3D('',#171679,#171680,#171681); +#171679 = CARTESIAN_POINT('',(108.3666495,-101.092201,1.585)); +#171680 = DIRECTION('',(0.,0.,1.)); +#171681 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#171682 = ORIENTED_EDGE('',*,*,#171683,.T.); +#171683 = EDGE_CURVE('',#171675,#171684,#171686,.T.); +#171684 = VERTEX_POINT('',#171685); +#171685 = CARTESIAN_POINT('',(108.140001,-100.890306,1.585)); +#171686 = LINE('',#171687,#171688); +#171687 = CARTESIAN_POINT('',(108.196791,-100.838129,1.585)); +#171688 = VECTOR('',#171689,1.); +#171689 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#171690 = ORIENTED_EDGE('',*,*,#171691,.T.); +#171691 = EDGE_CURVE('',#171684,#171692,#171694,.T.); +#171692 = VERTEX_POINT('',#171693); +#171693 = CARTESIAN_POINT('',(108.030095,-100.831349,1.585)); +#171694 = CIRCLE('',#171695,7.500024172471E-02); +#171695 = AXIS2_PLACEMENT_3D('',#171696,#171697,#171698); +#171696 = CARTESIAN_POINT('',(108.10474497002,-100.8241089561,1.585)); +#171697 = DIRECTION('',(-0.,0.,-1.)); +#171698 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#171699 = ORIENTED_EDGE('',*,*,#171700,.T.); +#171700 = EDGE_CURVE('',#171692,#171514,#171701,.T.); +#171701 = LINE('',#171702,#171703); +#171702 = CARTESIAN_POINT('',(108.030095,-100.831349,1.585)); +#171703 = VECTOR('',#171704,1.); +#171704 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#171705 = PLANE('',#171706); +#171706 = AXIS2_PLACEMENT_3D('',#171707,#171708,#171709); +#171707 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171708 = DIRECTION('',(0.,0.,1.)); +#171709 = DIRECTION('',(1.,0.,-0.)); +#171710 = SHELL_BASED_SURFACE_MODEL('',(#171711)); +#171711 = OPEN_SHELL('',(#171712)); +#171712 = ADVANCED_FACE('',(#171713),#171908,.T.); +#171713 = FACE_BOUND('',#171714,.F.); +#171714 = EDGE_LOOP('',(#171715,#171726,#171734,#171743,#171751,#171759, + #171767,#171775,#171784,#171792,#171801,#171809,#171817,#171825, + #171834,#171842,#171851,#171859,#171868,#171876,#171885,#171893, + #171902)); +#171715 = ORIENTED_EDGE('',*,*,#171716,.T.); +#171716 = EDGE_CURVE('',#171717,#171719,#171721,.T.); +#171717 = VERTEX_POINT('',#171718); +#171718 = CARTESIAN_POINT('',(112.080626,-100.32604,1.585)); +#171719 = VERTEX_POINT('',#171720); +#171720 = CARTESIAN_POINT('',(112.152364,-100.272919,1.585)); +#171721 = CIRCLE('',#171722,7.50033610077E-02); +#171722 = AXIS2_PLACEMENT_3D('',#171723,#171724,#171725); +#171723 = CARTESIAN_POINT('',(112.1523662707,-100.3479223609,1.585)); +#171724 = DIRECTION('',(0.,0.,-1.)); +#171725 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#171726 = ORIENTED_EDGE('',*,*,#171727,.T.); +#171727 = EDGE_CURVE('',#171719,#171728,#171730,.T.); +#171728 = VERTEX_POINT('',#171729); +#171729 = CARTESIAN_POINT('',(112.643186,-100.27436,1.585)); +#171730 = LINE('',#171731,#171732); +#171731 = CARTESIAN_POINT('',(112.152364,-100.272919,1.585)); +#171732 = VECTOR('',#171733,1.); +#171733 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#171734 = ORIENTED_EDGE('',*,*,#171735,.T.); +#171735 = EDGE_CURVE('',#171728,#171736,#171738,.T.); +#171736 = VERTEX_POINT('',#171737); +#171737 = CARTESIAN_POINT('',(112.628554,-100.422919,1.585)); +#171738 = CIRCLE('',#171739,7.500006711464E-02); +#171739 = AXIS2_PLACEMENT_3D('',#171740,#171741,#171742); +#171740 = CARTESIAN_POINT('',(112.62855406711,-100.3479189328,1.585)); +#171741 = DIRECTION('',(0.,0.,-1.)); +#171742 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#171743 = ORIENTED_EDGE('',*,*,#171744,.T.); +#171744 = EDGE_CURVE('',#171736,#171745,#171747,.T.); +#171745 = VERTEX_POINT('',#171746); +#171746 = CARTESIAN_POINT('',(112.220238,-100.422919,1.585)); +#171747 = LINE('',#171748,#171749); +#171748 = CARTESIAN_POINT('',(112.628554,-100.422919,1.585)); +#171749 = VECTOR('',#171750,1.); +#171750 = DIRECTION('',(-1.,0.,0.)); +#171751 = ORIENTED_EDGE('',*,*,#171752,.T.); +#171752 = EDGE_CURVE('',#171745,#171753,#171755,.T.); +#171753 = VERTEX_POINT('',#171754); +#171754 = CARTESIAN_POINT('',(112.195419,-100.671109,1.585)); +#171755 = LINE('',#171756,#171757); +#171756 = CARTESIAN_POINT('',(112.220238,-100.422919,1.585)); +#171757 = VECTOR('',#171758,1.); +#171758 = DIRECTION('',(-9.950371902097E-02,-0.99503719021,0.)); +#171759 = ORIENTED_EDGE('',*,*,#171760,.T.); +#171760 = EDGE_CURVE('',#171753,#171761,#171763,.T.); +#171761 = VERTEX_POINT('',#171762); +#171762 = CARTESIAN_POINT('',(112.23297,-100.655312,1.585)); +#171763 = LINE('',#171764,#171765); +#171764 = CARTESIAN_POINT('',(112.195419,-100.671109,1.585)); +#171765 = VECTOR('',#171766,1.); +#171766 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#171767 = ORIENTED_EDGE('',*,*,#171768,.T.); +#171768 = EDGE_CURVE('',#171761,#171769,#171771,.T.); +#171769 = VERTEX_POINT('',#171770); +#171770 = CARTESIAN_POINT('',(112.505506,-100.656534,1.585)); +#171771 = LINE('',#171772,#171773); +#171772 = CARTESIAN_POINT('',(112.23297,-100.655312,1.585)); +#171773 = VECTOR('',#171774,1.); +#171774 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#171775 = ORIENTED_EDGE('',*,*,#171776,.T.); +#171776 = EDGE_CURVE('',#171769,#171777,#171779,.T.); +#171777 = VERTEX_POINT('',#171778); +#171778 = CARTESIAN_POINT('',(112.749732,-100.904715,1.585)); +#171779 = CIRCLE('',#171780,0.348625649748); +#171780 = AXIS2_PLACEMENT_3D('',#171781,#171782,#171783); +#171781 = CARTESIAN_POINT('',(112.41233404586,-100.9924786838,1.585)); +#171782 = DIRECTION('',(0.,0.,-1.)); +#171783 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#171784 = ORIENTED_EDGE('',*,*,#171785,.T.); +#171785 = EDGE_CURVE('',#171777,#171786,#171788,.T.); +#171786 = VERTEX_POINT('',#171787); +#171787 = CARTESIAN_POINT('',(112.74851,-101.177252,1.585)); +#171788 = LINE('',#171789,#171790); +#171789 = CARTESIAN_POINT('',(112.749732,-100.904715,1.585)); +#171790 = VECTOR('',#171791,1.); +#171791 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#171792 = ORIENTED_EDGE('',*,*,#171793,.T.); +#171793 = EDGE_CURVE('',#171786,#171794,#171796,.T.); +#171794 = VERTEX_POINT('',#171795); +#171795 = CARTESIAN_POINT('',(112.500329,-101.421478,1.585)); +#171796 = CIRCLE('',#171797,0.348635327447); +#171797 = AXIS2_PLACEMENT_3D('',#171798,#171799,#171800); +#171798 = CARTESIAN_POINT('',(112.41255748129,-101.0840720841,1.585)); +#171799 = DIRECTION('',(0.,0.,-1.)); +#171800 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#171801 = ORIENTED_EDGE('',*,*,#171802,.T.); +#171802 = EDGE_CURVE('',#171794,#171803,#171805,.T.); +#171803 = VERTEX_POINT('',#171804); +#171804 = CARTESIAN_POINT('',(112.227792,-101.420256,1.585)); +#171805 = LINE('',#171806,#171807); +#171806 = CARTESIAN_POINT('',(112.500329,-101.421478,1.585)); +#171807 = VECTOR('',#171808,1.); +#171808 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#171809 = ORIENTED_EDGE('',*,*,#171810,.T.); +#171810 = EDGE_CURVE('',#171803,#171811,#171813,.T.); +#171811 = VERTEX_POINT('',#171812); +#171812 = CARTESIAN_POINT('',(112.105079,-101.35805,1.585)); +#171813 = LINE('',#171814,#171815); +#171814 = CARTESIAN_POINT('',(112.227792,-101.420256,1.585)); +#171815 = VECTOR('',#171816,1.); +#171816 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#171817 = ORIENTED_EDGE('',*,*,#171818,.T.); +#171818 = EDGE_CURVE('',#171811,#171819,#171821,.T.); +#171819 = VERTEX_POINT('',#171820); +#171820 = CARTESIAN_POINT('',(112.042384,-101.294347,1.585)); +#171821 = LINE('',#171822,#171823); +#171822 = CARTESIAN_POINT('',(112.105079,-101.35805,1.585)); +#171823 = VECTOR('',#171824,1.); +#171824 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#171825 = ORIENTED_EDGE('',*,*,#171826,.T.); +#171826 = EDGE_CURVE('',#171819,#171827,#171829,.T.); +#171827 = VERTEX_POINT('',#171828); +#171828 = CARTESIAN_POINT('',(112.157779,-101.199648,1.585)); +#171829 = CIRCLE('',#171830,7.50001266804E-02); +#171830 = AXIS2_PLACEMENT_3D('',#171831,#171832,#171833); +#171831 = CARTESIAN_POINT('',(112.10474505199,-101.2526802483,1.585)); +#171832 = DIRECTION('',(0.,0.,-1.)); +#171833 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#171834 = ORIENTED_EDGE('',*,*,#171835,.T.); +#171835 = EDGE_CURVE('',#171827,#171836,#171838,.T.); +#171836 = VERTEX_POINT('',#171837); +#171837 = CARTESIAN_POINT('',(112.196791,-101.238661,1.585)); +#171838 = LINE('',#171839,#171840); +#171839 = CARTESIAN_POINT('',(112.157779,-101.199648,1.585)); +#171840 = VECTOR('',#171841,1.); +#171841 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#171842 = ORIENTED_EDGE('',*,*,#171843,.T.); +#171843 = EDGE_CURVE('',#171836,#171844,#171846,.T.); +#171844 = VERTEX_POINT('',#171845); +#171845 = CARTESIAN_POINT('',(112.536507,-101.238661,1.585)); +#171846 = CIRCLE('',#171847,0.305620374329); +#171847 = AXIS2_PLACEMENT_3D('',#171848,#171849,#171850); +#171848 = CARTESIAN_POINT('',(112.366649,-100.98459,1.585)); +#171849 = DIRECTION('',(0.,0.,1.)); +#171850 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#171851 = ORIENTED_EDGE('',*,*,#171852,.T.); +#171852 = EDGE_CURVE('',#171844,#171853,#171855,.T.); +#171853 = VERTEX_POINT('',#171854); +#171854 = CARTESIAN_POINT('',(112.566914,-101.208253,1.585)); +#171855 = LINE('',#171856,#171857); +#171856 = CARTESIAN_POINT('',(112.536507,-101.238661,1.585)); +#171857 = VECTOR('',#171858,1.); +#171858 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#171859 = ORIENTED_EDGE('',*,*,#171860,.T.); +#171860 = EDGE_CURVE('',#171853,#171861,#171863,.T.); +#171861 = VERTEX_POINT('',#171862); +#171862 = CARTESIAN_POINT('',(112.566915,-100.868536,1.585)); +#171863 = CIRCLE('',#171864,0.305616146029); +#171864 = AXIS2_PLACEMENT_3D('',#171865,#171866,#171867); +#171865 = CARTESIAN_POINT('',(112.31284892049,-101.0383937521,1.585)); +#171866 = DIRECTION('',(0.,-0.,1.)); +#171867 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#171868 = ORIENTED_EDGE('',*,*,#171869,.T.); +#171869 = EDGE_CURVE('',#171861,#171870,#171872,.T.); +#171870 = VERTEX_POINT('',#171871); +#171871 = CARTESIAN_POINT('',(112.536508,-100.838129,1.585)); +#171872 = LINE('',#171873,#171874); +#171873 = CARTESIAN_POINT('',(112.566915,-100.868536,1.585)); +#171874 = VECTOR('',#171875,1.); +#171875 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#171876 = ORIENTED_EDGE('',*,*,#171877,.T.); +#171877 = EDGE_CURVE('',#171870,#171878,#171880,.T.); +#171878 = VERTEX_POINT('',#171879); +#171879 = CARTESIAN_POINT('',(112.196791,-100.838129,1.585)); +#171880 = CIRCLE('',#171881,0.305621483548); +#171881 = AXIS2_PLACEMENT_3D('',#171882,#171883,#171884); +#171882 = CARTESIAN_POINT('',(112.3666495,-101.092201,1.585)); +#171883 = DIRECTION('',(0.,0.,1.)); +#171884 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#171885 = ORIENTED_EDGE('',*,*,#171886,.T.); +#171886 = EDGE_CURVE('',#171878,#171887,#171889,.T.); +#171887 = VERTEX_POINT('',#171888); +#171888 = CARTESIAN_POINT('',(112.140001,-100.890306,1.585)); +#171889 = LINE('',#171890,#171891); +#171890 = CARTESIAN_POINT('',(112.196791,-100.838129,1.585)); +#171891 = VECTOR('',#171892,1.); +#171892 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#171893 = ORIENTED_EDGE('',*,*,#171894,.T.); +#171894 = EDGE_CURVE('',#171887,#171895,#171897,.T.); +#171895 = VERTEX_POINT('',#171896); +#171896 = CARTESIAN_POINT('',(112.030095,-100.831349,1.585)); +#171897 = CIRCLE('',#171898,7.500024172471E-02); +#171898 = AXIS2_PLACEMENT_3D('',#171899,#171900,#171901); +#171899 = CARTESIAN_POINT('',(112.10474497002,-100.8241089561,1.585)); +#171900 = DIRECTION('',(-0.,0.,-1.)); +#171901 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#171902 = ORIENTED_EDGE('',*,*,#171903,.T.); +#171903 = EDGE_CURVE('',#171895,#171717,#171904,.T.); +#171904 = LINE('',#171905,#171906); +#171905 = CARTESIAN_POINT('',(112.030095,-100.831349,1.585)); +#171906 = VECTOR('',#171907,1.); +#171907 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#171908 = PLANE('',#171909); +#171909 = AXIS2_PLACEMENT_3D('',#171910,#171911,#171912); +#171910 = CARTESIAN_POINT('',(0.,0.,1.585)); +#171911 = DIRECTION('',(0.,0.,1.)); +#171912 = DIRECTION('',(1.,0.,-0.)); +#171913 = SHELL_BASED_SURFACE_MODEL('',(#171914)); +#171914 = OPEN_SHELL('',(#171915)); +#171915 = ADVANCED_FACE('',(#171916,#172018),#172120,.T.); +#171916 = FACE_BOUND('',#171917,.F.); +#171917 = EDGE_LOOP('',(#171918,#171929,#171937,#171945,#171954,#171962, + #171970,#171979,#171987,#171995,#172004,#172012)); +#171918 = ORIENTED_EDGE('',*,*,#171919,.T.); +#171919 = EDGE_CURVE('',#171920,#171922,#171924,.T.); +#171920 = VERTEX_POINT('',#171921); +#171921 = CARTESIAN_POINT('',(113.160142,-100.33242,1.585)); +#171922 = VERTEX_POINT('',#171923); +#171923 = CARTESIAN_POINT('',(113.53298,-100.337786,1.585)); +#171924 = CIRCLE('',#171925,0.291788488016); +#171925 = AXIS2_PLACEMENT_3D('',#171926,#171927,#171928); +#171926 = CARTESIAN_POINT('',(113.34333086911,-100.5595375025,1.585)); +#171927 = DIRECTION('',(0.,0.,-1.)); +#171928 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#171929 = ORIENTED_EDGE('',*,*,#171930,.T.); +#171930 = EDGE_CURVE('',#171922,#171931,#171933,.T.); +#171931 = VERTEX_POINT('',#171932); +#171932 = CARTESIAN_POINT('',(113.596433,-100.403316,1.585)); +#171933 = LINE('',#171934,#171935); +#171934 = CARTESIAN_POINT('',(113.53298,-100.337786,1.585)); +#171935 = VECTOR('',#171936,1.); +#171936 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#171937 = ORIENTED_EDGE('',*,*,#171938,.T.); +#171938 = EDGE_CURVE('',#171931,#171939,#171941,.T.); +#171939 = VERTEX_POINT('',#171940); +#171940 = CARTESIAN_POINT('',(113.653696,-100.520205,1.585)); +#171941 = LINE('',#171942,#171943); +#171942 = CARTESIAN_POINT('',(113.596433,-100.403316,1.585)); +#171943 = VECTOR('',#171944,1.); +#171944 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#171945 = ORIENTED_EDGE('',*,*,#171946,.T.); +#171946 = EDGE_CURVE('',#171939,#171947,#171949,.T.); +#171947 = VERTEX_POINT('',#171948); +#171948 = CARTESIAN_POINT('',(113.648017,-101.190983,1.585)); +#171949 = CIRCLE('',#171950,0.967158496826); +#171950 = AXIS2_PLACEMENT_3D('',#171951,#171952,#171953); +#171951 = CARTESIAN_POINT('',(112.74374970686,-100.8479141722,1.585)); +#171952 = DIRECTION('',(0.,0.,-1.)); +#171953 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#171954 = ORIENTED_EDGE('',*,*,#171955,.T.); +#171955 = EDGE_CURVE('',#171947,#171956,#171958,.T.); +#171956 = VERTEX_POINT('',#171957); +#171957 = CARTESIAN_POINT('',(113.591067,-101.299963,1.585)); +#171958 = LINE('',#171959,#171960); +#171959 = CARTESIAN_POINT('',(113.648017,-101.190983,1.585)); +#171960 = VECTOR('',#171961,1.); +#171961 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#171962 = ORIENTED_EDGE('',*,*,#171963,.T.); +#171963 = EDGE_CURVE('',#171956,#171964,#171966,.T.); +#171964 = VERTEX_POINT('',#171965); +#171965 = CARTESIAN_POINT('',(113.525537,-101.363417,1.585)); +#171966 = LINE('',#171967,#171968); +#171967 = CARTESIAN_POINT('',(113.591067,-101.299963,1.585)); +#171968 = VECTOR('',#171969,1.); +#171969 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#171970 = ORIENTED_EDGE('',*,*,#171971,.T.); +#171971 = EDGE_CURVE('',#171964,#171972,#171974,.T.); +#171972 = VERTEX_POINT('',#171973); +#171973 = CARTESIAN_POINT('',(113.152698,-101.35805,1.585)); +#171974 = CIRCLE('',#171975,0.290998264264); +#171975 = AXIS2_PLACEMENT_3D('',#171976,#171977,#171978); +#171976 = CARTESIAN_POINT('',(113.34233341815,-101.1373275544,1.585)); +#171977 = DIRECTION('',(-0.,0.,-1.)); +#171978 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#171979 = ORIENTED_EDGE('',*,*,#171980,.T.); +#171980 = EDGE_CURVE('',#171972,#171981,#171983,.T.); +#171981 = VERTEX_POINT('',#171982); +#171982 = CARTESIAN_POINT('',(113.089245,-101.292517,1.585)); +#171983 = LINE('',#171984,#171985); +#171984 = CARTESIAN_POINT('',(113.152698,-101.35805,1.585)); +#171985 = VECTOR('',#171986,1.); +#171986 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#171987 = ORIENTED_EDGE('',*,*,#171988,.T.); +#171988 = EDGE_CURVE('',#171981,#171989,#171991,.T.); +#171989 = VERTEX_POINT('',#171990); +#171990 = CARTESIAN_POINT('',(113.031984,-101.175632,1.585)); +#171991 = LINE('',#171992,#171993); +#171992 = CARTESIAN_POINT('',(113.089245,-101.292517,1.585)); +#171993 = VECTOR('',#171994,1.); +#171994 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#171995 = ORIENTED_EDGE('',*,*,#171996,.T.); +#171996 = EDGE_CURVE('',#171989,#171997,#171999,.T.); +#171997 = VERTEX_POINT('',#171998); +#171998 = CARTESIAN_POINT('',(113.037663,-100.504854,1.585)); +#171999 = CIRCLE('',#172000,0.967158496826); +#172000 = AXIS2_PLACEMENT_3D('',#172001,#172002,#172003); +#172001 = CARTESIAN_POINT('',(113.94193029313,-100.8479228277,1.585)); +#172002 = DIRECTION('',(0.,0.,-1.)); +#172003 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#172004 = ORIENTED_EDGE('',*,*,#172005,.T.); +#172005 = EDGE_CURVE('',#171997,#172006,#172008,.T.); +#172006 = VERTEX_POINT('',#172007); +#172007 = CARTESIAN_POINT('',(113.094612,-100.395873,1.585)); +#172008 = LINE('',#172009,#172010); +#172009 = CARTESIAN_POINT('',(113.037663,-100.504854,1.585)); +#172010 = VECTOR('',#172011,1.); +#172011 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#172012 = ORIENTED_EDGE('',*,*,#172013,.T.); +#172013 = EDGE_CURVE('',#172006,#171920,#172014,.T.); +#172014 = LINE('',#172015,#172016); +#172015 = CARTESIAN_POINT('',(113.094612,-100.395873,1.585)); +#172016 = VECTOR('',#172017,1.); +#172017 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#172018 = FACE_BOUND('',#172019,.F.); +#172019 = EDGE_LOOP('',(#172020,#172031,#172039,#172047,#172056,#172064, + #172072,#172081,#172089,#172097,#172106,#172114)); +#172020 = ORIENTED_EDGE('',*,*,#172021,.T.); +#172021 = EDGE_CURVE('',#172022,#172024,#172026,.T.); +#172022 = VERTEX_POINT('',#172023); +#172023 = CARTESIAN_POINT('',(113.44127,-100.457177,1.585)); +#172024 = VERTEX_POINT('',#172025); +#172025 = CARTESIAN_POINT('',(113.24441,-100.457177,1.585)); +#172026 = CIRCLE('',#172027,0.148516804184); +#172027 = AXIS2_PLACEMENT_3D('',#172028,#172029,#172030); +#172028 = CARTESIAN_POINT('',(113.34284,-100.568392,1.585)); +#172029 = DIRECTION('',(0.,0.,1.)); +#172030 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#172031 = ORIENTED_EDGE('',*,*,#172032,.T.); +#172032 = EDGE_CURVE('',#172024,#172033,#172035,.T.); +#172033 = VERTEX_POINT('',#172034); +#172034 = CARTESIAN_POINT('',(113.214003,-100.487584,1.585)); +#172035 = LINE('',#172036,#172037); +#172036 = CARTESIAN_POINT('',(113.24441,-100.457177,1.585)); +#172037 = VECTOR('',#172038,1.); +#172038 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#172039 = ORIENTED_EDGE('',*,*,#172040,.T.); +#172040 = EDGE_CURVE('',#172033,#172041,#172043,.T.); +#172041 = VERTEX_POINT('',#172042); +#172042 = CARTESIAN_POINT('',(113.175509,-100.564571,1.585)); +#172043 = LINE('',#172044,#172045); +#172044 = CARTESIAN_POINT('',(113.214003,-100.487584,1.585)); +#172045 = VECTOR('',#172046,1.); +#172046 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#172047 = ORIENTED_EDGE('',*,*,#172048,.T.); +#172048 = EDGE_CURVE('',#172041,#172049,#172051,.T.); +#172049 = VERTEX_POINT('',#172050); +#172050 = CARTESIAN_POINT('',(113.175509,-101.131266,1.585)); +#172051 = CIRCLE('',#172052,0.815450468383); +#172052 = AXIS2_PLACEMENT_3D('',#172053,#172054,#172055); +#172053 = CARTESIAN_POINT('',(113.94014856255,-100.8479185,1.585)); +#172054 = DIRECTION('',(0.,0.,1.)); +#172055 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#172056 = ORIENTED_EDGE('',*,*,#172057,.T.); +#172057 = EDGE_CURVE('',#172049,#172058,#172060,.T.); +#172058 = VERTEX_POINT('',#172059); +#172059 = CARTESIAN_POINT('',(113.214003,-101.208253,1.585)); +#172060 = LINE('',#172061,#172062); +#172061 = CARTESIAN_POINT('',(113.175509,-101.131266,1.585)); +#172062 = VECTOR('',#172063,1.); +#172063 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#172064 = ORIENTED_EDGE('',*,*,#172065,.T.); +#172065 = EDGE_CURVE('',#172058,#172066,#172068,.T.); +#172066 = VERTEX_POINT('',#172067); +#172067 = CARTESIAN_POINT('',(113.24441,-101.238661,1.585)); +#172068 = LINE('',#172069,#172070); +#172069 = CARTESIAN_POINT('',(113.214003,-101.208253,1.585)); +#172070 = VECTOR('',#172071,1.); +#172071 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#172072 = ORIENTED_EDGE('',*,*,#172073,.T.); +#172073 = EDGE_CURVE('',#172066,#172074,#172076,.T.); +#172074 = VERTEX_POINT('',#172075); +#172075 = CARTESIAN_POINT('',(113.441269,-101.238661,1.585)); +#172076 = CIRCLE('',#172077,0.14851572397); +#172077 = AXIS2_PLACEMENT_3D('',#172078,#172079,#172080); +#172078 = CARTESIAN_POINT('',(113.3428395,-101.127447,1.585)); +#172079 = DIRECTION('',(0.,0.,1.)); +#172080 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#172081 = ORIENTED_EDGE('',*,*,#172082,.T.); +#172082 = EDGE_CURVE('',#172074,#172083,#172085,.T.); +#172083 = VERTEX_POINT('',#172084); +#172084 = CARTESIAN_POINT('',(113.471676,-101.208253,1.585)); +#172085 = LINE('',#172086,#172087); +#172086 = CARTESIAN_POINT('',(113.441269,-101.238661,1.585)); +#172087 = VECTOR('',#172088,1.); +#172088 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#172089 = ORIENTED_EDGE('',*,*,#172090,.T.); +#172090 = EDGE_CURVE('',#172083,#172091,#172093,.T.); +#172091 = VERTEX_POINT('',#172092); +#172092 = CARTESIAN_POINT('',(113.51017,-101.131266,1.585)); +#172093 = LINE('',#172094,#172095); +#172094 = CARTESIAN_POINT('',(113.471676,-101.208253,1.585)); +#172095 = VECTOR('',#172096,1.); +#172096 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#172097 = ORIENTED_EDGE('',*,*,#172098,.T.); +#172098 = EDGE_CURVE('',#172091,#172099,#172101,.T.); +#172099 = VERTEX_POINT('',#172100); +#172100 = CARTESIAN_POINT('',(113.51017,-100.564571,1.585)); +#172101 = CIRCLE('',#172102,0.815433004022); +#172102 = AXIS2_PLACEMENT_3D('',#172103,#172104,#172105); +#172103 = CARTESIAN_POINT('',(112.74554906235,-100.8479185,1.585)); +#172104 = DIRECTION('',(0.,-0.,1.)); +#172105 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#172106 = ORIENTED_EDGE('',*,*,#172107,.T.); +#172107 = EDGE_CURVE('',#172099,#172108,#172110,.T.); +#172108 = VERTEX_POINT('',#172109); +#172109 = CARTESIAN_POINT('',(113.471677,-100.487584,1.585)); +#172110 = LINE('',#172111,#172112); +#172111 = CARTESIAN_POINT('',(113.51017,-100.564571,1.585)); +#172112 = VECTOR('',#172113,1.); +#172113 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#172114 = ORIENTED_EDGE('',*,*,#172115,.T.); +#172115 = EDGE_CURVE('',#172108,#172022,#172116,.T.); +#172116 = LINE('',#172117,#172118); +#172117 = CARTESIAN_POINT('',(113.471677,-100.487584,1.585)); +#172118 = VECTOR('',#172119,1.); +#172119 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#172120 = PLANE('',#172121); +#172121 = AXIS2_PLACEMENT_3D('',#172122,#172123,#172124); +#172122 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172123 = DIRECTION('',(0.,0.,1.)); +#172124 = DIRECTION('',(1.,0.,-0.)); +#172125 = SHELL_BASED_SURFACE_MODEL('',(#172126)); +#172126 = OPEN_SHELL('',(#172127)); +#172127 = ADVANCED_FACE('',(#172128,#172271),#172341,.T.); +#172128 = FACE_BOUND('',#172129,.F.); +#172129 = EDGE_LOOP('',(#172130,#172141,#172149,#172157,#172166,#172174, + #172182,#172190,#172198,#172206,#172214,#172222,#172231,#172239, + #172248,#172256,#172265)); +#172130 = ORIENTED_EDGE('',*,*,#172131,.T.); +#172131 = EDGE_CURVE('',#172132,#172134,#172136,.T.); +#172132 = VERTEX_POINT('',#172133); +#172133 = CARTESIAN_POINT('',(179.181984,-100.7583,1.585)); +#172134 = VERTEX_POINT('',#172135); +#172135 = CARTESIAN_POINT('',(179.41168,-100.328456,1.585)); +#172136 = CIRCLE('',#172137,0.610092147705); +#172137 = AXIS2_PLACEMENT_3D('',#172138,#172139,#172140); +#172138 = CARTESIAN_POINT('',(179.79013074024,-100.8069823481,1.585)); +#172139 = DIRECTION('',(0.,0.,-1.)); +#172140 = DIRECTION('',(-0.99681128913,7.979507417374E-02,0.)); +#172141 = ORIENTED_EDGE('',*,*,#172142,.T.); +#172142 = EDGE_CURVE('',#172134,#172143,#172145,.T.); +#172143 = VERTEX_POINT('',#172144); +#172144 = CARTESIAN_POINT('',(179.525827,-100.27436,1.585)); +#172145 = LINE('',#172146,#172147); +#172146 = CARTESIAN_POINT('',(179.41168,-100.328456,1.585)); +#172147 = VECTOR('',#172148,1.); +#172148 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#172149 = ORIENTED_EDGE('',*,*,#172150,.T.); +#172150 = EDGE_CURVE('',#172143,#172151,#172153,.T.); +#172151 = VERTEX_POINT('',#172152); +#172152 = CARTESIAN_POINT('',(179.745567,-100.27436,1.585)); +#172153 = LINE('',#172154,#172155); +#172154 = CARTESIAN_POINT('',(179.525827,-100.27436,1.585)); +#172155 = VECTOR('',#172156,1.); +#172156 = DIRECTION('',(1.,0.,0.)); +#172157 = ORIENTED_EDGE('',*,*,#172158,.T.); +#172158 = EDGE_CURVE('',#172151,#172159,#172161,.T.); +#172159 = VERTEX_POINT('',#172160); +#172160 = CARTESIAN_POINT('',(179.730935,-100.422919,1.585)); +#172161 = CIRCLE('',#172162,7.500006711462E-02); +#172162 = AXIS2_PLACEMENT_3D('',#172163,#172164,#172165); +#172163 = CARTESIAN_POINT('',(179.73093506711,-100.3479189328,1.585)); +#172164 = DIRECTION('',(0.,0.,-1.)); +#172165 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#172166 = ORIENTED_EDGE('',*,*,#172167,.T.); +#172167 = EDGE_CURVE('',#172159,#172168,#172170,.T.); +#172168 = VERTEX_POINT('',#172169); +#172169 = CARTESIAN_POINT('',(179.558164,-100.422919,1.585)); +#172170 = LINE('',#172171,#172172); +#172171 = CARTESIAN_POINT('',(179.730935,-100.422919,1.585)); +#172172 = VECTOR('',#172173,1.); +#172173 = DIRECTION('',(-1.,0.,0.)); +#172174 = ORIENTED_EDGE('',*,*,#172175,.T.); +#172175 = EDGE_CURVE('',#172168,#172176,#172178,.T.); +#172176 = VERTEX_POINT('',#172177); +#172177 = CARTESIAN_POINT('',(179.489648,-100.457177,1.585)); +#172178 = LINE('',#172179,#172180); +#172179 = CARTESIAN_POINT('',(179.558164,-100.422919,1.585)); +#172180 = VECTOR('',#172181,1.); +#172181 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#172182 = ORIENTED_EDGE('',*,*,#172183,.T.); +#172183 = EDGE_CURVE('',#172176,#172184,#172186,.T.); +#172184 = VERTEX_POINT('',#172185); +#172185 = CARTESIAN_POINT('',(179.455886,-100.490938,1.585)); +#172186 = LINE('',#172187,#172188); +#172187 = CARTESIAN_POINT('',(179.489648,-100.457177,1.585)); +#172188 = VECTOR('',#172189,1.); +#172189 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#172190 = ORIENTED_EDGE('',*,*,#172191,.T.); +#172191 = EDGE_CURVE('',#172184,#172192,#172194,.T.); +#172192 = VERTEX_POINT('',#172193); +#172193 = CARTESIAN_POINT('',(179.371974,-100.616807,1.585)); +#172194 = LINE('',#172195,#172196); +#172195 = CARTESIAN_POINT('',(179.455886,-100.490938,1.585)); +#172196 = VECTOR('',#172197,1.); +#172197 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#172198 = ORIENTED_EDGE('',*,*,#172199,.T.); +#172199 = EDGE_CURVE('',#172192,#172200,#172202,.T.); +#172200 = VERTEX_POINT('',#172201); +#172201 = CARTESIAN_POINT('',(179.35345,-100.690904,1.585)); +#172202 = LINE('',#172203,#172204); +#172203 = CARTESIAN_POINT('',(179.371974,-100.616807,1.585)); +#172204 = VECTOR('',#172205,1.); +#172205 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#172206 = ORIENTED_EDGE('',*,*,#172207,.T.); +#172207 = EDGE_CURVE('',#172200,#172208,#172210,.T.); +#172208 = VERTEX_POINT('',#172209); +#172209 = CARTESIAN_POINT('',(179.430589,-100.655312,1.585)); +#172210 = LINE('',#172211,#172212); +#172211 = CARTESIAN_POINT('',(179.35345,-100.690904,1.585)); +#172212 = VECTOR('',#172213,1.); +#172213 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#172214 = ORIENTED_EDGE('',*,*,#172215,.T.); +#172215 = EDGE_CURVE('',#172208,#172216,#172218,.T.); +#172216 = VERTEX_POINT('',#172217); +#172217 = CARTESIAN_POINT('',(179.655506,-100.656534,1.585)); +#172218 = LINE('',#172219,#172220); +#172219 = CARTESIAN_POINT('',(179.430589,-100.655312,1.585)); +#172220 = VECTOR('',#172221,1.); +#172221 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#172222 = ORIENTED_EDGE('',*,*,#172223,.T.); +#172223 = EDGE_CURVE('',#172216,#172224,#172226,.T.); +#172224 = VERTEX_POINT('',#172225); +#172225 = CARTESIAN_POINT('',(179.899732,-100.904715,1.585)); +#172226 = CIRCLE('',#172227,0.348625649748); +#172227 = AXIS2_PLACEMENT_3D('',#172228,#172229,#172230); +#172228 = CARTESIAN_POINT('',(179.56233404586,-100.9924786838,1.585)); +#172229 = DIRECTION('',(0.,0.,-1.)); +#172230 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#172231 = ORIENTED_EDGE('',*,*,#172232,.T.); +#172232 = EDGE_CURVE('',#172224,#172233,#172235,.T.); +#172233 = VERTEX_POINT('',#172234); +#172234 = CARTESIAN_POINT('',(179.89851,-101.177252,1.585)); +#172235 = LINE('',#172236,#172237); +#172236 = CARTESIAN_POINT('',(179.899732,-100.904715,1.585)); +#172237 = VECTOR('',#172238,1.); +#172238 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#172239 = ORIENTED_EDGE('',*,*,#172240,.T.); +#172240 = EDGE_CURVE('',#172233,#172241,#172243,.T.); +#172241 = VERTEX_POINT('',#172242); +#172242 = CARTESIAN_POINT('',(179.650329,-101.421478,1.585)); +#172243 = CIRCLE('',#172244,0.348635327447); +#172244 = AXIS2_PLACEMENT_3D('',#172245,#172246,#172247); +#172245 = CARTESIAN_POINT('',(179.56255748129,-101.0840720841,1.585)); +#172246 = DIRECTION('',(0.,0.,-1.)); +#172247 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#172248 = ORIENTED_EDGE('',*,*,#172249,.T.); +#172249 = EDGE_CURVE('',#172241,#172250,#172252,.T.); +#172250 = VERTEX_POINT('',#172251); +#172251 = CARTESIAN_POINT('',(179.425411,-101.420256,1.585)); +#172252 = LINE('',#172253,#172254); +#172253 = CARTESIAN_POINT('',(179.650329,-101.421478,1.585)); +#172254 = VECTOR('',#172255,1.); +#172255 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#172256 = ORIENTED_EDGE('',*,*,#172257,.T.); +#172257 = EDGE_CURVE('',#172250,#172258,#172260,.T.); +#172258 = VERTEX_POINT('',#172259); +#172259 = CARTESIAN_POINT('',(179.181186,-101.172074,1.585)); +#172260 = CIRCLE('',#172261,0.348628446662); +#172261 = AXIS2_PLACEMENT_3D('',#172262,#172263,#172264); +#172262 = CARTESIAN_POINT('',(179.51858661322,-101.0843094284,1.585)); +#172263 = DIRECTION('',(0.,0.,-1.)); +#172264 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#172265 = ORIENTED_EDGE('',*,*,#172266,.T.); +#172266 = EDGE_CURVE('',#172258,#172132,#172267,.T.); +#172267 = LINE('',#172268,#172269); +#172268 = CARTESIAN_POINT('',(179.181186,-101.172074,1.585)); +#172269 = VECTOR('',#172270,1.); +#172270 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#172271 = FACE_BOUND('',#172272,.F.); +#172272 = EDGE_LOOP('',(#172273,#172284,#172292,#172301,#172309,#172318, + #172326,#172335)); +#172273 = ORIENTED_EDGE('',*,*,#172274,.T.); +#172274 = EDGE_CURVE('',#172275,#172277,#172279,.T.); +#172275 = VERTEX_POINT('',#172276); +#172276 = CARTESIAN_POINT('',(179.686508,-100.838129,1.585)); +#172277 = VERTEX_POINT('',#172278); +#172278 = CARTESIAN_POINT('',(179.39441,-100.838129,1.585)); +#172279 = CIRCLE('',#172280,0.252889603602); +#172280 = AXIS2_PLACEMENT_3D('',#172281,#172282,#172283); +#172281 = CARTESIAN_POINT('',(179.540459,-101.044582,1.585)); +#172282 = DIRECTION('',(0.,0.,1.)); +#172283 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#172284 = ORIENTED_EDGE('',*,*,#172285,.T.); +#172285 = EDGE_CURVE('',#172277,#172286,#172288,.T.); +#172286 = VERTEX_POINT('',#172287); +#172287 = CARTESIAN_POINT('',(179.364003,-100.868536,1.585)); +#172288 = LINE('',#172289,#172290); +#172289 = CARTESIAN_POINT('',(179.39441,-100.838129,1.585)); +#172290 = VECTOR('',#172291,1.); +#172291 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#172292 = ORIENTED_EDGE('',*,*,#172293,.T.); +#172293 = EDGE_CURVE('',#172286,#172294,#172296,.T.); +#172294 = VERTEX_POINT('',#172295); +#172295 = CARTESIAN_POINT('',(179.364003,-101.208253,1.585)); +#172296 = CIRCLE('',#172297,0.305621483548); +#172297 = AXIS2_PLACEMENT_3D('',#172298,#172299,#172300); +#172298 = CARTESIAN_POINT('',(179.618075,-101.0383945,1.585)); +#172299 = DIRECTION('',(0.,0.,1.)); +#172300 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#172301 = ORIENTED_EDGE('',*,*,#172302,.T.); +#172302 = EDGE_CURVE('',#172294,#172303,#172305,.T.); +#172303 = VERTEX_POINT('',#172304); +#172304 = CARTESIAN_POINT('',(179.39441,-101.238661,1.585)); +#172305 = LINE('',#172306,#172307); +#172306 = CARTESIAN_POINT('',(179.364003,-101.208253,1.585)); +#172307 = VECTOR('',#172308,1.); +#172308 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#172309 = ORIENTED_EDGE('',*,*,#172310,.T.); +#172310 = EDGE_CURVE('',#172303,#172311,#172313,.T.); +#172311 = VERTEX_POINT('',#172312); +#172312 = CARTESIAN_POINT('',(179.686507,-101.238661,1.585)); +#172313 = CIRCLE('',#172314,0.252888498466); +#172314 = AXIS2_PLACEMENT_3D('',#172315,#172316,#172317); +#172315 = CARTESIAN_POINT('',(179.5404585,-101.032209,1.585)); +#172316 = DIRECTION('',(0.,0.,1.)); +#172317 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#172318 = ORIENTED_EDGE('',*,*,#172319,.T.); +#172319 = EDGE_CURVE('',#172311,#172320,#172322,.T.); +#172320 = VERTEX_POINT('',#172321); +#172321 = CARTESIAN_POINT('',(179.716914,-101.208253,1.585)); +#172322 = LINE('',#172323,#172324); +#172323 = CARTESIAN_POINT('',(179.686507,-101.238661,1.585)); +#172324 = VECTOR('',#172325,1.); +#172325 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#172326 = ORIENTED_EDGE('',*,*,#172327,.T.); +#172327 = EDGE_CURVE('',#172320,#172328,#172330,.T.); +#172328 = VERTEX_POINT('',#172329); +#172329 = CARTESIAN_POINT('',(179.716915,-100.868536,1.585)); +#172330 = CIRCLE('',#172331,0.305616146029); +#172331 = AXIS2_PLACEMENT_3D('',#172332,#172333,#172334); +#172332 = CARTESIAN_POINT('',(179.46284892049,-101.0383937521,1.585)); +#172333 = DIRECTION('',(0.,-0.,1.)); +#172334 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#172335 = ORIENTED_EDGE('',*,*,#172336,.T.); +#172336 = EDGE_CURVE('',#172328,#172275,#172337,.T.); +#172337 = LINE('',#172338,#172339); +#172338 = CARTESIAN_POINT('',(179.716915,-100.868536,1.585)); +#172339 = VECTOR('',#172340,1.); +#172340 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#172341 = PLANE('',#172342); +#172342 = AXIS2_PLACEMENT_3D('',#172343,#172344,#172345); +#172343 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172344 = DIRECTION('',(0.,0.,1.)); +#172345 = DIRECTION('',(1.,0.,-0.)); +#172346 = SHELL_BASED_SURFACE_MODEL('',(#172347)); +#172347 = OPEN_SHELL('',(#172348)); +#172348 = ADVANCED_FACE('',(#172349,#172451),#172553,.T.); +#172349 = FACE_BOUND('',#172350,.F.); +#172350 = EDGE_LOOP('',(#172351,#172362,#172370,#172378,#172387,#172395, + #172403,#172412,#172420,#172428,#172437,#172445)); +#172351 = ORIENTED_EDGE('',*,*,#172352,.T.); +#172352 = EDGE_CURVE('',#172353,#172355,#172357,.T.); +#172353 = VERTEX_POINT('',#172354); +#172354 = CARTESIAN_POINT('',(180.310142,-100.33242,1.585)); +#172355 = VERTEX_POINT('',#172356); +#172356 = CARTESIAN_POINT('',(180.68298,-100.337786,1.585)); +#172357 = CIRCLE('',#172358,0.291788488016); +#172358 = AXIS2_PLACEMENT_3D('',#172359,#172360,#172361); +#172359 = CARTESIAN_POINT('',(180.49333086911,-100.5595375025,1.585)); +#172360 = DIRECTION('',(0.,0.,-1.)); +#172361 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#172362 = ORIENTED_EDGE('',*,*,#172363,.T.); +#172363 = EDGE_CURVE('',#172355,#172364,#172366,.T.); +#172364 = VERTEX_POINT('',#172365); +#172365 = CARTESIAN_POINT('',(180.746433,-100.403316,1.585)); +#172366 = LINE('',#172367,#172368); +#172367 = CARTESIAN_POINT('',(180.68298,-100.337786,1.585)); +#172368 = VECTOR('',#172369,1.); +#172369 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#172370 = ORIENTED_EDGE('',*,*,#172371,.T.); +#172371 = EDGE_CURVE('',#172364,#172372,#172374,.T.); +#172372 = VERTEX_POINT('',#172373); +#172373 = CARTESIAN_POINT('',(180.803696,-100.520205,1.585)); +#172374 = LINE('',#172375,#172376); +#172375 = CARTESIAN_POINT('',(180.746433,-100.403316,1.585)); +#172376 = VECTOR('',#172377,1.); +#172377 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#172378 = ORIENTED_EDGE('',*,*,#172379,.T.); +#172379 = EDGE_CURVE('',#172372,#172380,#172382,.T.); +#172380 = VERTEX_POINT('',#172381); +#172381 = CARTESIAN_POINT('',(180.798017,-101.190983,1.585)); +#172382 = CIRCLE('',#172383,0.967158496826); +#172383 = AXIS2_PLACEMENT_3D('',#172384,#172385,#172386); +#172384 = CARTESIAN_POINT('',(179.89374970686,-100.8479141722,1.585)); +#172385 = DIRECTION('',(0.,0.,-1.)); +#172386 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#172387 = ORIENTED_EDGE('',*,*,#172388,.T.); +#172388 = EDGE_CURVE('',#172380,#172389,#172391,.T.); +#172389 = VERTEX_POINT('',#172390); +#172390 = CARTESIAN_POINT('',(180.741067,-101.299963,1.585)); +#172391 = LINE('',#172392,#172393); +#172392 = CARTESIAN_POINT('',(180.798017,-101.190983,1.585)); +#172393 = VECTOR('',#172394,1.); +#172394 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#172395 = ORIENTED_EDGE('',*,*,#172396,.T.); +#172396 = EDGE_CURVE('',#172389,#172397,#172399,.T.); +#172397 = VERTEX_POINT('',#172398); +#172398 = CARTESIAN_POINT('',(180.675537,-101.363417,1.585)); +#172399 = LINE('',#172400,#172401); +#172400 = CARTESIAN_POINT('',(180.741067,-101.299963,1.585)); +#172401 = VECTOR('',#172402,1.); +#172402 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#172403 = ORIENTED_EDGE('',*,*,#172404,.T.); +#172404 = EDGE_CURVE('',#172397,#172405,#172407,.T.); +#172405 = VERTEX_POINT('',#172406); +#172406 = CARTESIAN_POINT('',(180.302698,-101.35805,1.585)); +#172407 = CIRCLE('',#172408,0.290998264264); +#172408 = AXIS2_PLACEMENT_3D('',#172409,#172410,#172411); +#172409 = CARTESIAN_POINT('',(180.49233341815,-101.1373275544,1.585)); +#172410 = DIRECTION('',(-0.,0.,-1.)); +#172411 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#172412 = ORIENTED_EDGE('',*,*,#172413,.T.); +#172413 = EDGE_CURVE('',#172405,#172414,#172416,.T.); +#172414 = VERTEX_POINT('',#172415); +#172415 = CARTESIAN_POINT('',(180.239245,-101.292517,1.585)); +#172416 = LINE('',#172417,#172418); +#172417 = CARTESIAN_POINT('',(180.302698,-101.35805,1.585)); +#172418 = VECTOR('',#172419,1.); +#172419 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#172420 = ORIENTED_EDGE('',*,*,#172421,.T.); +#172421 = EDGE_CURVE('',#172414,#172422,#172424,.T.); +#172422 = VERTEX_POINT('',#172423); +#172423 = CARTESIAN_POINT('',(180.181984,-101.175632,1.585)); +#172424 = LINE('',#172425,#172426); +#172425 = CARTESIAN_POINT('',(180.239245,-101.292517,1.585)); +#172426 = VECTOR('',#172427,1.); +#172427 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#172428 = ORIENTED_EDGE('',*,*,#172429,.T.); +#172429 = EDGE_CURVE('',#172422,#172430,#172432,.T.); +#172430 = VERTEX_POINT('',#172431); +#172431 = CARTESIAN_POINT('',(180.187663,-100.504854,1.585)); +#172432 = CIRCLE('',#172433,0.967158496826); +#172433 = AXIS2_PLACEMENT_3D('',#172434,#172435,#172436); +#172434 = CARTESIAN_POINT('',(181.09193029313,-100.8479228277,1.585)); +#172435 = DIRECTION('',(0.,0.,-1.)); +#172436 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#172437 = ORIENTED_EDGE('',*,*,#172438,.T.); +#172438 = EDGE_CURVE('',#172430,#172439,#172441,.T.); +#172439 = VERTEX_POINT('',#172440); +#172440 = CARTESIAN_POINT('',(180.244612,-100.395873,1.585)); +#172441 = LINE('',#172442,#172443); +#172442 = CARTESIAN_POINT('',(180.187663,-100.504854,1.585)); +#172443 = VECTOR('',#172444,1.); +#172444 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#172445 = ORIENTED_EDGE('',*,*,#172446,.T.); +#172446 = EDGE_CURVE('',#172439,#172353,#172447,.T.); +#172447 = LINE('',#172448,#172449); +#172448 = CARTESIAN_POINT('',(180.244612,-100.395873,1.585)); +#172449 = VECTOR('',#172450,1.); +#172450 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#172451 = FACE_BOUND('',#172452,.F.); +#172452 = EDGE_LOOP('',(#172453,#172464,#172472,#172480,#172489,#172497, + #172505,#172514,#172522,#172530,#172539,#172547)); +#172453 = ORIENTED_EDGE('',*,*,#172454,.T.); +#172454 = EDGE_CURVE('',#172455,#172457,#172459,.T.); +#172455 = VERTEX_POINT('',#172456); +#172456 = CARTESIAN_POINT('',(180.59127,-100.457177,1.585)); +#172457 = VERTEX_POINT('',#172458); +#172458 = CARTESIAN_POINT('',(180.39441,-100.457177,1.585)); +#172459 = CIRCLE('',#172460,0.148516804184); +#172460 = AXIS2_PLACEMENT_3D('',#172461,#172462,#172463); +#172461 = CARTESIAN_POINT('',(180.49284,-100.568392,1.585)); +#172462 = DIRECTION('',(0.,0.,1.)); +#172463 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#172464 = ORIENTED_EDGE('',*,*,#172465,.T.); +#172465 = EDGE_CURVE('',#172457,#172466,#172468,.T.); +#172466 = VERTEX_POINT('',#172467); +#172467 = CARTESIAN_POINT('',(180.364003,-100.487584,1.585)); +#172468 = LINE('',#172469,#172470); +#172469 = CARTESIAN_POINT('',(180.39441,-100.457177,1.585)); +#172470 = VECTOR('',#172471,1.); +#172471 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#172472 = ORIENTED_EDGE('',*,*,#172473,.T.); +#172473 = EDGE_CURVE('',#172466,#172474,#172476,.T.); +#172474 = VERTEX_POINT('',#172475); +#172475 = CARTESIAN_POINT('',(180.325509,-100.564571,1.585)); +#172476 = LINE('',#172477,#172478); +#172477 = CARTESIAN_POINT('',(180.364003,-100.487584,1.585)); +#172478 = VECTOR('',#172479,1.); +#172479 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#172480 = ORIENTED_EDGE('',*,*,#172481,.T.); +#172481 = EDGE_CURVE('',#172474,#172482,#172484,.T.); +#172482 = VERTEX_POINT('',#172483); +#172483 = CARTESIAN_POINT('',(180.325509,-101.131266,1.585)); +#172484 = CIRCLE('',#172485,0.815450468383); +#172485 = AXIS2_PLACEMENT_3D('',#172486,#172487,#172488); +#172486 = CARTESIAN_POINT('',(181.09014856255,-100.8479185,1.585)); +#172487 = DIRECTION('',(0.,0.,1.)); +#172488 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#172489 = ORIENTED_EDGE('',*,*,#172490,.T.); +#172490 = EDGE_CURVE('',#172482,#172491,#172493,.T.); +#172491 = VERTEX_POINT('',#172492); +#172492 = CARTESIAN_POINT('',(180.364003,-101.208253,1.585)); +#172493 = LINE('',#172494,#172495); +#172494 = CARTESIAN_POINT('',(180.325509,-101.131266,1.585)); +#172495 = VECTOR('',#172496,1.); +#172496 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#172497 = ORIENTED_EDGE('',*,*,#172498,.T.); +#172498 = EDGE_CURVE('',#172491,#172499,#172501,.T.); +#172499 = VERTEX_POINT('',#172500); +#172500 = CARTESIAN_POINT('',(180.39441,-101.238661,1.585)); +#172501 = LINE('',#172502,#172503); +#172502 = CARTESIAN_POINT('',(180.364003,-101.208253,1.585)); +#172503 = VECTOR('',#172504,1.); +#172504 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#172505 = ORIENTED_EDGE('',*,*,#172506,.T.); +#172506 = EDGE_CURVE('',#172499,#172507,#172509,.T.); +#172507 = VERTEX_POINT('',#172508); +#172508 = CARTESIAN_POINT('',(180.591269,-101.238661,1.585)); +#172509 = CIRCLE('',#172510,0.14851572397); +#172510 = AXIS2_PLACEMENT_3D('',#172511,#172512,#172513); +#172511 = CARTESIAN_POINT('',(180.4928395,-101.127447,1.585)); +#172512 = DIRECTION('',(0.,0.,1.)); +#172513 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#172514 = ORIENTED_EDGE('',*,*,#172515,.T.); +#172515 = EDGE_CURVE('',#172507,#172516,#172518,.T.); +#172516 = VERTEX_POINT('',#172517); +#172517 = CARTESIAN_POINT('',(180.621676,-101.208253,1.585)); +#172518 = LINE('',#172519,#172520); +#172519 = CARTESIAN_POINT('',(180.591269,-101.238661,1.585)); +#172520 = VECTOR('',#172521,1.); +#172521 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#172522 = ORIENTED_EDGE('',*,*,#172523,.T.); +#172523 = EDGE_CURVE('',#172516,#172524,#172526,.T.); +#172524 = VERTEX_POINT('',#172525); +#172525 = CARTESIAN_POINT('',(180.66017,-101.131266,1.585)); +#172526 = LINE('',#172527,#172528); +#172527 = CARTESIAN_POINT('',(180.621676,-101.208253,1.585)); +#172528 = VECTOR('',#172529,1.); +#172529 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#172530 = ORIENTED_EDGE('',*,*,#172531,.T.); +#172531 = EDGE_CURVE('',#172524,#172532,#172534,.T.); +#172532 = VERTEX_POINT('',#172533); +#172533 = CARTESIAN_POINT('',(180.66017,-100.564571,1.585)); +#172534 = CIRCLE('',#172535,0.815433004022); +#172535 = AXIS2_PLACEMENT_3D('',#172536,#172537,#172538); +#172536 = CARTESIAN_POINT('',(179.89554906235,-100.8479185,1.585)); +#172537 = DIRECTION('',(0.,-0.,1.)); +#172538 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#172539 = ORIENTED_EDGE('',*,*,#172540,.T.); +#172540 = EDGE_CURVE('',#172532,#172541,#172543,.T.); +#172541 = VERTEX_POINT('',#172542); +#172542 = CARTESIAN_POINT('',(180.621677,-100.487584,1.585)); +#172543 = LINE('',#172544,#172545); +#172544 = CARTESIAN_POINT('',(180.66017,-100.564571,1.585)); +#172545 = VECTOR('',#172546,1.); +#172546 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#172547 = ORIENTED_EDGE('',*,*,#172548,.T.); +#172548 = EDGE_CURVE('',#172541,#172455,#172549,.T.); +#172549 = LINE('',#172550,#172551); +#172550 = CARTESIAN_POINT('',(180.621677,-100.487584,1.585)); +#172551 = VECTOR('',#172552,1.); +#172552 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#172553 = PLANE('',#172554); +#172554 = AXIS2_PLACEMENT_3D('',#172555,#172556,#172557); +#172555 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172556 = DIRECTION('',(0.,0.,1.)); +#172557 = DIRECTION('',(1.,0.,-0.)); +#172558 = SHELL_BASED_SURFACE_MODEL('',(#172559)); +#172559 = OPEN_SHELL('',(#172560)); +#172560 = ADVANCED_FACE('',(#172561,#172614),#172640,.T.); +#172561 = FACE_BOUND('',#172562,.F.); +#172562 = EDGE_LOOP('',(#172563,#172574,#172582,#172591,#172599,#172608) + ); +#172563 = ORIENTED_EDGE('',*,*,#172564,.T.); +#172564 = EDGE_CURVE('',#172565,#172567,#172569,.T.); +#172565 = VERTEX_POINT('',#172566); +#172566 = CARTESIAN_POINT('',(140.149224,-100.980674,1.585)); +#172567 = VERTEX_POINT('',#172568); +#172568 = CARTESIAN_POINT('',(140.234076,-100.980674,1.585)); +#172569 = CIRCLE('',#172570,5.999686798802E-02); +#172570 = AXIS2_PLACEMENT_3D('',#172571,#172572,#172573); +#172571 = CARTESIAN_POINT('',(140.19165,-101.0230963843,1.585)); +#172572 = DIRECTION('',(0.,0.,-1.)); +#172573 = DIRECTION('',(-0.707136912688,0.707076648401,0.)); +#172574 = ORIENTED_EDGE('',*,*,#172575,.T.); +#172575 = EDGE_CURVE('',#172567,#172576,#172578,.T.); +#172576 = VERTEX_POINT('',#172577); +#172577 = CARTESIAN_POINT('',(140.534076,-101.280674,1.585)); +#172578 = LINE('',#172579,#172580); +#172579 = CARTESIAN_POINT('',(140.234076,-100.980674,1.585)); +#172580 = VECTOR('',#172581,1.); +#172581 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#172582 = ORIENTED_EDGE('',*,*,#172583,.T.); +#172583 = EDGE_CURVE('',#172576,#172584,#172586,.T.); +#172584 = VERTEX_POINT('',#172585); +#172585 = CARTESIAN_POINT('',(140.49165,-101.3831,1.585)); +#172586 = CIRCLE('',#172587,5.999940475497E-02); +#172587 = AXIS2_PLACEMENT_3D('',#172588,#172589,#172590); +#172588 = CARTESIAN_POINT('',(140.49165062331,-101.3231005952,1.585)); +#172589 = DIRECTION('',(0.,0.,-1.)); +#172590 = DIRECTION('',(0.707096626292,0.707116935935,0.)); +#172591 = ORIENTED_EDGE('',*,*,#172592,.T.); +#172592 = EDGE_CURVE('',#172584,#172593,#172595,.T.); +#172593 = VERTEX_POINT('',#172594); +#172594 = CARTESIAN_POINT('',(139.89165,-101.3831,1.585)); +#172595 = LINE('',#172596,#172597); +#172596 = CARTESIAN_POINT('',(140.49165,-101.3831,1.585)); +#172597 = VECTOR('',#172598,1.); +#172598 = DIRECTION('',(-1.,0.,0.)); +#172599 = ORIENTED_EDGE('',*,*,#172600,.T.); +#172600 = EDGE_CURVE('',#172593,#172601,#172603,.T.); +#172601 = VERTEX_POINT('',#172602); +#172602 = CARTESIAN_POINT('',(139.849224,-101.280674,1.585)); +#172603 = CIRCLE('',#172604,5.999940475496E-02); +#172604 = AXIS2_PLACEMENT_3D('',#172605,#172606,#172607); +#172605 = CARTESIAN_POINT('',(139.89164937668,-101.3231005952,1.585)); +#172606 = DIRECTION('',(0.,0.,-1.)); +#172607 = DIRECTION('',(1.038874045148E-05,-0.999999999946,0.)); +#172608 = ORIENTED_EDGE('',*,*,#172609,.T.); +#172609 = EDGE_CURVE('',#172601,#172565,#172610,.T.); +#172610 = LINE('',#172611,#172612); +#172611 = CARTESIAN_POINT('',(139.849224,-101.280674,1.585)); +#172612 = VECTOR('',#172613,1.); +#172613 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#172614 = FACE_BOUND('',#172615,.F.); +#172615 = EDGE_LOOP('',(#172616,#172626,#172634)); +#172616 = ORIENTED_EDGE('',*,*,#172617,.T.); +#172617 = EDGE_CURVE('',#172618,#172620,#172622,.T.); +#172618 = VERTEX_POINT('',#172619); +#172619 = CARTESIAN_POINT('',(140.036502,-101.2631,1.585)); +#172620 = VERTEX_POINT('',#172621); +#172621 = CARTESIAN_POINT('',(140.346798,-101.2631,1.585)); +#172622 = LINE('',#172623,#172624); +#172623 = CARTESIAN_POINT('',(140.036502,-101.2631,1.585)); +#172624 = VECTOR('',#172625,1.); +#172625 = DIRECTION('',(1.,0.,0.)); +#172626 = ORIENTED_EDGE('',*,*,#172627,.T.); +#172627 = EDGE_CURVE('',#172620,#172628,#172630,.T.); +#172628 = VERTEX_POINT('',#172629); +#172629 = CARTESIAN_POINT('',(140.19165,-101.107952,1.585)); +#172630 = LINE('',#172631,#172632); +#172631 = CARTESIAN_POINT('',(140.346798,-101.2631,1.585)); +#172632 = VECTOR('',#172633,1.); +#172633 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#172634 = ORIENTED_EDGE('',*,*,#172635,.T.); +#172635 = EDGE_CURVE('',#172628,#172618,#172636,.T.); +#172636 = LINE('',#172637,#172638); +#172637 = CARTESIAN_POINT('',(140.19165,-101.107952,1.585)); +#172638 = VECTOR('',#172639,1.); +#172639 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#172640 = PLANE('',#172641); +#172641 = AXIS2_PLACEMENT_3D('',#172642,#172643,#172644); +#172642 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172643 = DIRECTION('',(0.,0.,1.)); +#172644 = DIRECTION('',(1.,0.,-0.)); +#172645 = SHELL_BASED_SURFACE_MODEL('',(#172646)); +#172646 = OPEN_SHELL('',(#172647)); +#172647 = ADVANCED_FACE('',(#172648,#172782),#172860,.T.); +#172648 = FACE_BOUND('',#172649,.F.); +#172649 = EDGE_LOOP('',(#172650,#172660,#172668,#172676,#172684,#172693, + #172701,#172710,#172718,#172726,#172734,#172742,#172750,#172759, + #172767,#172776)); +#172650 = ORIENTED_EDGE('',*,*,#172651,.T.); +#172651 = EDGE_CURVE('',#172652,#172654,#172656,.T.); +#172652 = VERTEX_POINT('',#172653); +#172653 = CARTESIAN_POINT('',(139.968689,-98.767667,1.585)); +#172654 = VERTEX_POINT('',#172655); +#172655 = CARTESIAN_POINT('',(139.99165,-98.7631,1.585)); +#172656 = LINE('',#172657,#172658); +#172657 = CARTESIAN_POINT('',(139.968689,-98.767667,1.585)); +#172658 = VECTOR('',#172659,1.); +#172659 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#172660 = ORIENTED_EDGE('',*,*,#172661,.T.); +#172661 = EDGE_CURVE('',#172654,#172662,#172664,.T.); +#172662 = VERTEX_POINT('',#172663); +#172663 = CARTESIAN_POINT('',(142.79165,-98.7631,1.585)); +#172664 = LINE('',#172665,#172666); +#172665 = CARTESIAN_POINT('',(139.99165,-98.7631,1.585)); +#172666 = VECTOR('',#172667,1.); +#172667 = DIRECTION('',(1.,0.,0.)); +#172668 = ORIENTED_EDGE('',*,*,#172669,.T.); +#172669 = EDGE_CURVE('',#172662,#172670,#172672,.T.); +#172670 = VERTEX_POINT('',#172671); +#172671 = CARTESIAN_POINT('',(142.814611,-98.767667,1.585)); +#172672 = LINE('',#172673,#172674); +#172673 = CARTESIAN_POINT('',(142.79165,-98.7631,1.585)); +#172674 = VECTOR('',#172675,1.); +#172675 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#172676 = ORIENTED_EDGE('',*,*,#172677,.T.); +#172677 = EDGE_CURVE('',#172670,#172678,#172680,.T.); +#172678 = VERTEX_POINT('',#172679); +#172679 = CARTESIAN_POINT('',(142.889919,-98.777703,1.585)); +#172680 = LINE('',#172681,#172682); +#172681 = CARTESIAN_POINT('',(142.814611,-98.767667,1.585)); +#172682 = VECTOR('',#172683,1.); +#172683 = DIRECTION('',(0.991236635155,-0.132098195018,0.)); +#172684 = ORIENTED_EDGE('',*,*,#172685,.T.); +#172685 = EDGE_CURVE('',#172678,#172686,#172688,.T.); +#172686 = VERTEX_POINT('',#172687); +#172687 = CARTESIAN_POINT('',(143.50165,-99.5231,1.585)); +#172688 = CIRCLE('',#172689,0.760001389949); +#172689 = AXIS2_PLACEMENT_3D('',#172690,#172691,#172692); +#172690 = CARTESIAN_POINT('',(142.74164861005,-99.52310088314,1.585)); +#172691 = DIRECTION('',(0.,0.,-1.)); +#172692 = DIRECTION('',(0.195092261553,0.980784894603,0.)); +#172693 = ORIENTED_EDGE('',*,*,#172694,.T.); +#172694 = EDGE_CURVE('',#172686,#172695,#172697,.T.); +#172695 = VERTEX_POINT('',#172696); +#172696 = CARTESIAN_POINT('',(143.50165,-100.1231,1.585)); +#172697 = LINE('',#172698,#172699); +#172698 = CARTESIAN_POINT('',(143.50165,-99.5231,1.585)); +#172699 = VECTOR('',#172700,1.); +#172700 = DIRECTION('',(0.,-1.,0.)); +#172701 = ORIENTED_EDGE('',*,*,#172702,.T.); +#172702 = EDGE_CURVE('',#172695,#172703,#172705,.T.); +#172703 = VERTEX_POINT('',#172704); +#172704 = CARTESIAN_POINT('',(142.889919,-100.868497,1.585)); +#172705 = CIRCLE('',#172706,0.759999019977); +#172706 = AXIS2_PLACEMENT_3D('',#172707,#172708,#172709); +#172707 = CARTESIAN_POINT('',(142.74165098002,-100.1231010618,1.585)); +#172708 = DIRECTION('',(0.,0.,-1.)); +#172709 = DIRECTION('',(0.999999999999,1.397165543076E-06,0.)); +#172710 = ORIENTED_EDGE('',*,*,#172711,.T.); +#172711 = EDGE_CURVE('',#172703,#172712,#172714,.T.); +#172712 = VERTEX_POINT('',#172713); +#172713 = CARTESIAN_POINT('',(142.814611,-100.878533,1.585)); +#172714 = LINE('',#172715,#172716); +#172715 = CARTESIAN_POINT('',(142.889919,-100.868497,1.585)); +#172716 = VECTOR('',#172717,1.); +#172717 = DIRECTION('',(-0.991236635155,-0.132098195018,0.)); +#172718 = ORIENTED_EDGE('',*,*,#172719,.T.); +#172719 = EDGE_CURVE('',#172712,#172720,#172722,.T.); +#172720 = VERTEX_POINT('',#172721); +#172721 = CARTESIAN_POINT('',(142.79165,-100.8831,1.585)); +#172722 = LINE('',#172723,#172724); +#172723 = CARTESIAN_POINT('',(142.814611,-100.878533,1.585)); +#172724 = VECTOR('',#172725,1.); +#172725 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#172726 = ORIENTED_EDGE('',*,*,#172727,.T.); +#172727 = EDGE_CURVE('',#172720,#172728,#172730,.T.); +#172728 = VERTEX_POINT('',#172729); +#172729 = CARTESIAN_POINT('',(139.99165,-100.8831,1.585)); +#172730 = LINE('',#172731,#172732); +#172731 = CARTESIAN_POINT('',(142.79165,-100.8831,1.585)); +#172732 = VECTOR('',#172733,1.); +#172733 = DIRECTION('',(-1.,0.,0.)); +#172734 = ORIENTED_EDGE('',*,*,#172735,.T.); +#172735 = EDGE_CURVE('',#172728,#172736,#172738,.T.); +#172736 = VERTEX_POINT('',#172737); +#172737 = CARTESIAN_POINT('',(139.965783,-100.875627,1.585)); +#172738 = LINE('',#172739,#172740); +#172739 = CARTESIAN_POINT('',(139.99165,-100.8831,1.585)); +#172740 = VECTOR('',#172741,1.); +#172741 = DIRECTION('',(-0.960711101854,0.277550317554,0.)); +#172742 = ORIENTED_EDGE('',*,*,#172743,.T.); +#172743 = EDGE_CURVE('',#172736,#172744,#172746,.T.); +#172744 = VERTEX_POINT('',#172745); +#172745 = CARTESIAN_POINT('',(139.893381,-100.868497,1.585)); +#172746 = LINE('',#172747,#172748); +#172747 = CARTESIAN_POINT('',(139.965783,-100.875627,1.585)); +#172748 = VECTOR('',#172749,1.); +#172749 = DIRECTION('',(-0.995186033295,9.800387306128E-02,0.)); +#172750 = ORIENTED_EDGE('',*,*,#172751,.T.); +#172751 = EDGE_CURVE('',#172744,#172752,#172754,.T.); +#172752 = VERTEX_POINT('',#172753); +#172753 = CARTESIAN_POINT('',(139.28165,-100.1231,1.585)); +#172754 = CIRCLE('',#172755,0.760001389949); +#172755 = AXIS2_PLACEMENT_3D('',#172756,#172757,#172758); +#172756 = CARTESIAN_POINT('',(140.04165138994,-100.1230991168,1.585)); +#172757 = DIRECTION('',(0.,0.,-1.)); +#172758 = DIRECTION('',(-0.195092261553,-0.980784894603,-0.)); +#172759 = ORIENTED_EDGE('',*,*,#172760,.T.); +#172760 = EDGE_CURVE('',#172752,#172761,#172763,.T.); +#172761 = VERTEX_POINT('',#172762); +#172762 = CARTESIAN_POINT('',(139.28165,-99.5231,1.585)); +#172763 = LINE('',#172764,#172765); +#172764 = CARTESIAN_POINT('',(139.28165,-100.1231,1.585)); +#172765 = VECTOR('',#172766,1.); +#172766 = DIRECTION('',(0.,1.,0.)); +#172767 = ORIENTED_EDGE('',*,*,#172768,.T.); +#172768 = EDGE_CURVE('',#172761,#172769,#172771,.T.); +#172769 = VERTEX_POINT('',#172770); +#172770 = CARTESIAN_POINT('',(139.893381,-98.777703,1.585)); +#172771 = CIRCLE('',#172772,0.759999019977); +#172772 = AXIS2_PLACEMENT_3D('',#172773,#172774,#172775); +#172773 = CARTESIAN_POINT('',(140.04164901997,-99.52309893815,1.585)); +#172774 = DIRECTION('',(0.,0.,-1.)); +#172775 = DIRECTION('',(-0.999999999999,-1.397165636569E-06,-0.)); +#172776 = ORIENTED_EDGE('',*,*,#172777,.T.); +#172777 = EDGE_CURVE('',#172769,#172652,#172778,.T.); +#172778 = LINE('',#172779,#172780); +#172779 = CARTESIAN_POINT('',(139.893381,-98.777703,1.585)); +#172780 = VECTOR('',#172781,1.); +#172781 = DIRECTION('',(0.991236635155,0.132098195018,0.)); +#172782 = FACE_BOUND('',#172783,.F.); +#172783 = EDGE_LOOP('',(#172784,#172795,#172803,#172811,#172820,#172828, + #172837,#172845,#172854)); +#172784 = ORIENTED_EDGE('',*,*,#172785,.T.); +#172785 = EDGE_CURVE('',#172786,#172788,#172790,.T.); +#172786 = VERTEX_POINT('',#172787); +#172787 = CARTESIAN_POINT('',(143.38165,-99.450989,1.585)); +#172788 = VERTEX_POINT('',#172789); +#172789 = CARTESIAN_POINT('',(142.813761,-98.8831,1.585)); +#172790 = CIRCLE('',#172791,0.64404917508); +#172791 = AXIS2_PLACEMENT_3D('',#172792,#172793,#172794); +#172792 = CARTESIAN_POINT('',(142.74165046088,-99.52309953911,1.585)); +#172793 = DIRECTION('',(0.,0.,1.)); +#172794 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#172795 = ORIENTED_EDGE('',*,*,#172796,.T.); +#172796 = EDGE_CURVE('',#172788,#172797,#172799,.T.); +#172797 = VERTEX_POINT('',#172798); +#172798 = CARTESIAN_POINT('',(140.04165,-98.8831,1.585)); +#172799 = LINE('',#172800,#172801); +#172800 = CARTESIAN_POINT('',(142.813761,-98.8831,1.585)); +#172801 = VECTOR('',#172802,1.); +#172802 = DIRECTION('',(-1.,0.,0.)); +#172803 = ORIENTED_EDGE('',*,*,#172804,.T.); +#172804 = EDGE_CURVE('',#172797,#172805,#172807,.T.); +#172805 = VERTEX_POINT('',#172806); +#172806 = CARTESIAN_POINT('',(139.969539,-98.8831,1.585)); +#172807 = LINE('',#172808,#172809); +#172808 = CARTESIAN_POINT('',(140.04165,-98.8831,1.585)); +#172809 = VECTOR('',#172810,1.); +#172810 = DIRECTION('',(-1.,0.,0.)); +#172811 = ORIENTED_EDGE('',*,*,#172812,.T.); +#172812 = EDGE_CURVE('',#172805,#172813,#172815,.T.); +#172813 = VERTEX_POINT('',#172814); +#172814 = CARTESIAN_POINT('',(139.40165,-99.450989,1.585)); +#172815 = CIRCLE('',#172816,0.64404917508); +#172816 = AXIS2_PLACEMENT_3D('',#172817,#172818,#172819); +#172817 = CARTESIAN_POINT('',(140.04164953911,-99.52309953911,1.585)); +#172818 = DIRECTION('',(0.,0.,1.)); +#172819 = DIRECTION('',(-0.111964337363,0.993712225526,0.)); +#172820 = ORIENTED_EDGE('',*,*,#172821,.T.); +#172821 = EDGE_CURVE('',#172813,#172822,#172824,.T.); +#172822 = VERTEX_POINT('',#172823); +#172823 = CARTESIAN_POINT('',(139.40165,-100.195211,1.585)); +#172824 = LINE('',#172825,#172826); +#172825 = CARTESIAN_POINT('',(139.40165,-99.450989,1.585)); +#172826 = VECTOR('',#172827,1.); +#172827 = DIRECTION('',(0.,-1.,0.)); +#172828 = ORIENTED_EDGE('',*,*,#172829,.T.); +#172829 = EDGE_CURVE('',#172822,#172830,#172832,.T.); +#172830 = VERTEX_POINT('',#172831); +#172831 = CARTESIAN_POINT('',(139.969539,-100.7631,1.585)); +#172832 = CIRCLE('',#172833,0.64404917508); +#172833 = AXIS2_PLACEMENT_3D('',#172834,#172835,#172836); +#172834 = CARTESIAN_POINT('',(140.04164953911,-100.1231004608,1.585)); +#172835 = DIRECTION('',(0.,0.,1.)); +#172836 = DIRECTION('',(-0.993712225526,-0.111964337363,0.)); +#172837 = ORIENTED_EDGE('',*,*,#172838,.T.); +#172838 = EDGE_CURVE('',#172830,#172839,#172841,.T.); +#172839 = VERTEX_POINT('',#172840); +#172840 = CARTESIAN_POINT('',(142.813761,-100.7631,1.585)); +#172841 = LINE('',#172842,#172843); +#172842 = CARTESIAN_POINT('',(139.969539,-100.7631,1.585)); +#172843 = VECTOR('',#172844,1.); +#172844 = DIRECTION('',(1.,0.,0.)); +#172845 = ORIENTED_EDGE('',*,*,#172846,.T.); +#172846 = EDGE_CURVE('',#172839,#172847,#172849,.T.); +#172847 = VERTEX_POINT('',#172848); +#172848 = CARTESIAN_POINT('',(143.38165,-100.195211,1.585)); +#172849 = CIRCLE('',#172850,0.64404917508); +#172850 = AXIS2_PLACEMENT_3D('',#172851,#172852,#172853); +#172851 = CARTESIAN_POINT('',(142.74165046088,-100.1231004608,1.585)); +#172852 = DIRECTION('',(0.,0.,1.)); +#172853 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#172854 = ORIENTED_EDGE('',*,*,#172855,.T.); +#172855 = EDGE_CURVE('',#172847,#172786,#172856,.T.); +#172856 = LINE('',#172857,#172858); +#172857 = CARTESIAN_POINT('',(143.38165,-100.195211,1.585)); +#172858 = VECTOR('',#172859,1.); +#172859 = DIRECTION('',(0.,1.,0.)); +#172860 = PLANE('',#172861); +#172861 = AXIS2_PLACEMENT_3D('',#172862,#172863,#172864); +#172862 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172863 = DIRECTION('',(0.,0.,1.)); +#172864 = DIRECTION('',(1.,0.,-0.)); +#172865 = SHELL_BASED_SURFACE_MODEL('',(#172866)); +#172866 = OPEN_SHELL('',(#172867)); +#172867 = ADVANCED_FACE('',(#172868),#172904,.T.); +#172868 = FACE_BOUND('',#172869,.F.); +#172869 = EDGE_LOOP('',(#172870,#172881,#172889,#172898)); +#172870 = ORIENTED_EDGE('',*,*,#172871,.T.); +#172871 = EDGE_CURVE('',#172872,#172874,#172876,.T.); +#172872 = VERTEX_POINT('',#172873); +#172873 = CARTESIAN_POINT('',(134.629392,-100.4056,1.585)); +#172874 = VERTEX_POINT('',#172875); +#172875 = CARTESIAN_POINT('',(134.629392,-100.2856,1.585)); +#172876 = CIRCLE('',#172877,6.000000000043E-02); +#172877 = AXIS2_PLACEMENT_3D('',#172878,#172879,#172880); +#172878 = CARTESIAN_POINT('',(134.62939177441,-100.3456,1.585)); +#172879 = DIRECTION('',(0.,0.,-1.)); +#172880 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#172881 = ORIENTED_EDGE('',*,*,#172882,.T.); +#172882 = EDGE_CURVE('',#172874,#172883,#172885,.T.); +#172883 = VERTEX_POINT('',#172884); +#172884 = CARTESIAN_POINT('',(135.103908,-100.2856,1.585)); +#172885 = LINE('',#172886,#172887); +#172886 = CARTESIAN_POINT('',(134.629392,-100.2856,1.585)); +#172887 = VECTOR('',#172888,1.); +#172888 = DIRECTION('',(1.,0.,0.)); +#172889 = ORIENTED_EDGE('',*,*,#172890,.T.); +#172890 = EDGE_CURVE('',#172883,#172891,#172893,.T.); +#172891 = VERTEX_POINT('',#172892); +#172892 = CARTESIAN_POINT('',(135.103908,-100.4056,1.585)); +#172893 = CIRCLE('',#172894,6.000000000043E-02); +#172894 = AXIS2_PLACEMENT_3D('',#172895,#172896,#172897); +#172895 = CARTESIAN_POINT('',(135.10390822558,-100.3456,1.585)); +#172896 = DIRECTION('',(0.,0.,-1.)); +#172897 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#172898 = ORIENTED_EDGE('',*,*,#172899,.T.); +#172899 = EDGE_CURVE('',#172891,#172872,#172900,.T.); +#172900 = LINE('',#172901,#172902); +#172901 = CARTESIAN_POINT('',(135.103908,-100.4056,1.585)); +#172902 = VECTOR('',#172903,1.); +#172903 = DIRECTION('',(-1.,0.,0.)); +#172904 = PLANE('',#172905); +#172905 = AXIS2_PLACEMENT_3D('',#172906,#172907,#172908); +#172906 = CARTESIAN_POINT('',(0.,0.,1.585)); +#172907 = DIRECTION('',(0.,0.,1.)); +#172908 = DIRECTION('',(1.,0.,-0.)); +#172909 = SHELL_BASED_SURFACE_MODEL('',(#172910)); +#172910 = OPEN_SHELL('',(#172911)); +#172911 = ADVANCED_FACE('',(#172912),#172998,.T.); +#172912 = FACE_BOUND('',#172913,.F.); +#172913 = EDGE_LOOP('',(#172914,#172925,#172933,#172942,#172950,#172958, + #172966,#172975,#172983,#172992)); +#172914 = ORIENTED_EDGE('',*,*,#172915,.T.); +#172915 = EDGE_CURVE('',#172916,#172918,#172920,.T.); +#172916 = VERTEX_POINT('',#172917); +#172917 = CARTESIAN_POINT('',(90.62165,-96.6731,1.585)); +#172918 = VERTEX_POINT('',#172919); +#172919 = CARTESIAN_POINT('',(90.68165,-96.6131,1.585)); +#172920 = CIRCLE('',#172921,5.999932016257E-02); +#172921 = AXIS2_PLACEMENT_3D('',#172922,#172923,#172924); +#172922 = CARTESIAN_POINT('',(90.681649320159,-96.67309932015,1.585)); +#172923 = DIRECTION('',(0.,0.,-1.)); +#172924 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#172925 = ORIENTED_EDGE('',*,*,#172926,.T.); +#172926 = EDGE_CURVE('',#172918,#172927,#172929,.T.); +#172927 = VERTEX_POINT('',#172928); +#172928 = CARTESIAN_POINT('',(96.19165,-96.6131,1.585)); +#172929 = LINE('',#172930,#172931); +#172930 = CARTESIAN_POINT('',(90.68165,-96.6131,1.585)); +#172931 = VECTOR('',#172932,1.); +#172932 = DIRECTION('',(1.,0.,0.)); +#172933 = ORIENTED_EDGE('',*,*,#172934,.T.); +#172934 = EDGE_CURVE('',#172927,#172935,#172937,.T.); +#172935 = VERTEX_POINT('',#172936); +#172936 = CARTESIAN_POINT('',(96.19165,-96.7331,1.585)); +#172937 = CIRCLE('',#172938,6.000000000042E-02); +#172938 = AXIS2_PLACEMENT_3D('',#172939,#172940,#172941); +#172939 = CARTESIAN_POINT('',(96.191650225588,-96.6731,1.585)); +#172940 = DIRECTION('',(0.,0.,-1.)); +#172941 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#172942 = ORIENTED_EDGE('',*,*,#172943,.T.); +#172943 = EDGE_CURVE('',#172935,#172944,#172946,.T.); +#172944 = VERTEX_POINT('',#172945); +#172945 = CARTESIAN_POINT('',(90.74165,-96.7331,1.585)); +#172946 = LINE('',#172947,#172948); +#172947 = CARTESIAN_POINT('',(96.19165,-96.7331,1.585)); +#172948 = VECTOR('',#172949,1.); +#172949 = DIRECTION('',(-1.,0.,0.)); +#172950 = ORIENTED_EDGE('',*,*,#172951,.T.); +#172951 = EDGE_CURVE('',#172944,#172952,#172954,.T.); +#172952 = VERTEX_POINT('',#172953); +#172953 = CARTESIAN_POINT('',(90.74165,-99.9131,1.585)); +#172954 = LINE('',#172955,#172956); +#172955 = CARTESIAN_POINT('',(90.74165,-96.7331,1.585)); +#172956 = VECTOR('',#172957,1.); +#172957 = DIRECTION('',(0.,-1.,0.)); +#172958 = ORIENTED_EDGE('',*,*,#172959,.T.); +#172959 = EDGE_CURVE('',#172952,#172960,#172962,.T.); +#172960 = VERTEX_POINT('',#172961); +#172961 = CARTESIAN_POINT('',(96.19165,-99.9131,1.585)); +#172962 = LINE('',#172963,#172964); +#172963 = CARTESIAN_POINT('',(90.74165,-99.9131,1.585)); +#172964 = VECTOR('',#172965,1.); +#172965 = DIRECTION('',(1.,0.,0.)); +#172966 = ORIENTED_EDGE('',*,*,#172967,.T.); +#172967 = EDGE_CURVE('',#172960,#172968,#172970,.T.); +#172968 = VERTEX_POINT('',#172969); +#172969 = CARTESIAN_POINT('',(96.19165,-100.0331,1.585)); +#172970 = CIRCLE('',#172971,6.000000000042E-02); +#172971 = AXIS2_PLACEMENT_3D('',#172972,#172973,#172974); +#172972 = CARTESIAN_POINT('',(96.191650225588,-99.9731,1.585)); +#172973 = DIRECTION('',(0.,0.,-1.)); +#172974 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#172975 = ORIENTED_EDGE('',*,*,#172976,.T.); +#172976 = EDGE_CURVE('',#172968,#172977,#172979,.T.); +#172977 = VERTEX_POINT('',#172978); +#172978 = CARTESIAN_POINT('',(90.68165,-100.0331,1.585)); +#172979 = LINE('',#172980,#172981); +#172980 = CARTESIAN_POINT('',(96.19165,-100.0331,1.585)); +#172981 = VECTOR('',#172982,1.); +#172982 = DIRECTION('',(-1.,0.,0.)); +#172983 = ORIENTED_EDGE('',*,*,#172984,.T.); +#172984 = EDGE_CURVE('',#172977,#172985,#172987,.T.); +#172985 = VERTEX_POINT('',#172986); +#172986 = CARTESIAN_POINT('',(90.62165,-99.9731,1.585)); +#172987 = CIRCLE('',#172988,5.999932016262E-02); +#172988 = AXIS2_PLACEMENT_3D('',#172989,#172990,#172991); +#172989 = CARTESIAN_POINT('',(90.681649320159,-99.97310067984,1.585)); +#172990 = DIRECTION('',(0.,0.,-1.)); +#172991 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#172992 = ORIENTED_EDGE('',*,*,#172993,.T.); +#172993 = EDGE_CURVE('',#172985,#172916,#172994,.T.); +#172994 = LINE('',#172995,#172996); +#172995 = CARTESIAN_POINT('',(90.62165,-99.9731,1.585)); +#172996 = VECTOR('',#172997,1.); +#172997 = DIRECTION('',(0.,1.,0.)); +#172998 = PLANE('',#172999); +#172999 = AXIS2_PLACEMENT_3D('',#173000,#173001,#173002); +#173000 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173001 = DIRECTION('',(0.,0.,1.)); +#173002 = DIRECTION('',(1.,0.,-0.)); +#173003 = SHELL_BASED_SURFACE_MODEL('',(#173004)); +#173004 = OPEN_SHELL('',(#173005)); +#173005 = ADVANCED_FACE('',(#173006),#173042,.T.); +#173006 = FACE_BOUND('',#173007,.F.); +#173007 = EDGE_LOOP('',(#173008,#173019,#173027,#173036)); +#173008 = ORIENTED_EDGE('',*,*,#173009,.T.); +#173009 = EDGE_CURVE('',#173010,#173012,#173014,.T.); +#173010 = VERTEX_POINT('',#173011); +#173011 = CARTESIAN_POINT('',(134.629392,-99.3606,1.585)); +#173012 = VERTEX_POINT('',#173013); +#173013 = CARTESIAN_POINT('',(134.629392,-99.2406,1.585)); +#173014 = CIRCLE('',#173015,6.000000000043E-02); +#173015 = AXIS2_PLACEMENT_3D('',#173016,#173017,#173018); +#173016 = CARTESIAN_POINT('',(134.62939177441,-99.3006,1.585)); +#173017 = DIRECTION('',(0.,0.,-1.)); +#173018 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#173019 = ORIENTED_EDGE('',*,*,#173020,.T.); +#173020 = EDGE_CURVE('',#173012,#173021,#173023,.T.); +#173021 = VERTEX_POINT('',#173022); +#173022 = CARTESIAN_POINT('',(135.103908,-99.2406,1.585)); +#173023 = LINE('',#173024,#173025); +#173024 = CARTESIAN_POINT('',(134.629392,-99.2406,1.585)); +#173025 = VECTOR('',#173026,1.); +#173026 = DIRECTION('',(1.,0.,0.)); +#173027 = ORIENTED_EDGE('',*,*,#173028,.T.); +#173028 = EDGE_CURVE('',#173021,#173029,#173031,.T.); +#173029 = VERTEX_POINT('',#173030); +#173030 = CARTESIAN_POINT('',(135.103908,-99.3606,1.585)); +#173031 = CIRCLE('',#173032,6.000000000043E-02); +#173032 = AXIS2_PLACEMENT_3D('',#173033,#173034,#173035); +#173033 = CARTESIAN_POINT('',(135.10390822558,-99.3006,1.585)); +#173034 = DIRECTION('',(0.,0.,-1.)); +#173035 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#173036 = ORIENTED_EDGE('',*,*,#173037,.T.); +#173037 = EDGE_CURVE('',#173029,#173010,#173038,.T.); +#173038 = LINE('',#173039,#173040); +#173039 = CARTESIAN_POINT('',(135.103908,-99.3606,1.585)); +#173040 = VECTOR('',#173041,1.); +#173041 = DIRECTION('',(-1.,0.,0.)); +#173042 = PLANE('',#173043); +#173043 = AXIS2_PLACEMENT_3D('',#173044,#173045,#173046); +#173044 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173045 = DIRECTION('',(0.,0.,1.)); +#173046 = DIRECTION('',(1.,0.,-0.)); +#173047 = SHELL_BASED_SURFACE_MODEL('',(#173048)); +#173048 = OPEN_SHELL('',(#173049)); +#173049 = ADVANCED_FACE('',(#173050),#173086,.T.); +#173050 = FACE_BOUND('',#173051,.F.); +#173051 = EDGE_LOOP('',(#173052,#173063,#173071,#173080)); +#173052 = ORIENTED_EDGE('',*,*,#173053,.T.); +#173053 = EDGE_CURVE('',#173054,#173056,#173058,.T.); +#173054 = VERTEX_POINT('',#173055); +#173055 = CARTESIAN_POINT('',(99.930398,-99.1181,1.585)); +#173056 = VERTEX_POINT('',#173057); +#173057 = CARTESIAN_POINT('',(99.930398,-98.9981,1.585)); +#173058 = CIRCLE('',#173059,6.000000000043E-02); +#173059 = AXIS2_PLACEMENT_3D('',#173060,#173061,#173062); +#173060 = CARTESIAN_POINT('',(99.930397774412,-99.0581,1.585)); +#173061 = DIRECTION('',(0.,0.,-1.)); +#173062 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#173063 = ORIENTED_EDGE('',*,*,#173064,.T.); +#173064 = EDGE_CURVE('',#173056,#173065,#173067,.T.); +#173065 = VERTEX_POINT('',#173066); +#173066 = CARTESIAN_POINT('',(100.452902,-98.9981,1.585)); +#173067 = LINE('',#173068,#173069); +#173068 = CARTESIAN_POINT('',(99.930398,-98.9981,1.585)); +#173069 = VECTOR('',#173070,1.); +#173070 = DIRECTION('',(1.,0.,0.)); +#173071 = ORIENTED_EDGE('',*,*,#173072,.T.); +#173072 = EDGE_CURVE('',#173065,#173073,#173075,.T.); +#173073 = VERTEX_POINT('',#173074); +#173074 = CARTESIAN_POINT('',(100.452902,-99.1181,1.585)); +#173075 = CIRCLE('',#173076,6.000000000043E-02); +#173076 = AXIS2_PLACEMENT_3D('',#173077,#173078,#173079); +#173077 = CARTESIAN_POINT('',(100.45290222558,-99.0581,1.585)); +#173078 = DIRECTION('',(0.,0.,-1.)); +#173079 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#173080 = ORIENTED_EDGE('',*,*,#173081,.T.); +#173081 = EDGE_CURVE('',#173073,#173054,#173082,.T.); +#173082 = LINE('',#173083,#173084); +#173083 = CARTESIAN_POINT('',(100.452902,-99.1181,1.585)); +#173084 = VECTOR('',#173085,1.); +#173085 = DIRECTION('',(-1.,0.,0.)); +#173086 = PLANE('',#173087); +#173087 = AXIS2_PLACEMENT_3D('',#173088,#173089,#173090); +#173088 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173089 = DIRECTION('',(0.,0.,1.)); +#173090 = DIRECTION('',(1.,0.,-0.)); +#173091 = SHELL_BASED_SURFACE_MODEL('',(#173092)); +#173092 = OPEN_SHELL('',(#173093)); +#173093 = ADVANCED_FACE('',(#173094,#173205),#173257,.T.); +#173094 = FACE_BOUND('',#173095,.F.); +#173095 = EDGE_LOOP('',(#173096,#173107,#173115,#173124,#173132,#173141, + #173149,#173157,#173166,#173174,#173182,#173190,#173199)); +#173096 = ORIENTED_EDGE('',*,*,#173097,.T.); +#173097 = EDGE_CURVE('',#173098,#173100,#173102,.T.); +#173098 = VERTEX_POINT('',#173099); +#173099 = CARTESIAN_POINT('',(133.578805,-97.833287,1.585)); +#173100 = VERTEX_POINT('',#173101); +#173101 = CARTESIAN_POINT('',(133.652364,-97.772919,1.585)); +#173102 = CIRCLE('',#173103,7.500074938989E-02); +#173103 = AXIS2_PLACEMENT_3D('',#173104,#173105,#173106); +#173104 = CARTESIAN_POINT('',(133.65236446611,-97.84791974938,1.585)); +#173105 = DIRECTION('',(0.,0.,-1.)); +#173106 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#173107 = ORIENTED_EDGE('',*,*,#173108,.T.); +#173108 = EDGE_CURVE('',#173100,#173109,#173111,.T.); +#173109 = VERTEX_POINT('',#173110); +#173110 = CARTESIAN_POINT('',(134.047948,-97.77436,1.585)); +#173111 = LINE('',#173112,#173113); +#173112 = CARTESIAN_POINT('',(133.652364,-97.772919,1.585)); +#173113 = VECTOR('',#173114,1.); +#173114 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#173115 = ORIENTED_EDGE('',*,*,#173116,.T.); +#173116 = EDGE_CURVE('',#173109,#173117,#173119,.T.); +#173117 = VERTEX_POINT('',#173118); +#173118 = CARTESIAN_POINT('',(134.297351,-98.023763,1.585)); +#173119 = CIRCLE('',#173120,0.347870264855); +#173120 = AXIS2_PLACEMENT_3D('',#173121,#173122,#173123); +#173121 = CARTESIAN_POINT('',(133.96062026502,-98.11109073497,1.585)); +#173122 = DIRECTION('',(0.,0.,-1.)); +#173123 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#173124 = ORIENTED_EDGE('',*,*,#173125,.T.); +#173125 = EDGE_CURVE('',#173117,#173126,#173128,.T.); +#173126 = VERTEX_POINT('',#173127); +#173127 = CARTESIAN_POINT('',(134.296129,-98.201062,1.585)); +#173128 = LINE('',#173129,#173130); +#173129 = CARTESIAN_POINT('',(134.297351,-98.023763,1.585)); +#173130 = VECTOR('',#173131,1.); +#173131 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#173132 = ORIENTED_EDGE('',*,*,#173133,.T.); +#173133 = EDGE_CURVE('',#173126,#173134,#173136,.T.); +#173134 = VERTEX_POINT('',#173135); +#173135 = CARTESIAN_POINT('',(134.047948,-98.445287,1.585)); +#173136 = CIRCLE('',#173137,0.348632345848); +#173137 = AXIS2_PLACEMENT_3D('',#173138,#173139,#173140); +#173138 = CARTESIAN_POINT('',(133.96017919403,-98.1078834593,1.585)); +#173139 = DIRECTION('',(0.,0.,-1.)); +#173140 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#173141 = ORIENTED_EDGE('',*,*,#173142,.T.); +#173142 = EDGE_CURVE('',#173134,#173143,#173145,.T.); +#173143 = VERTEX_POINT('',#173144); +#173144 = CARTESIAN_POINT('',(134.034431,-98.446618,1.585)); +#173145 = LINE('',#173146,#173147); +#173146 = CARTESIAN_POINT('',(134.047948,-98.445287,1.585)); +#173147 = VECTOR('',#173148,1.); +#173148 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#173149 = ORIENTED_EDGE('',*,*,#173150,.T.); +#173150 = EDGE_CURVE('',#173143,#173151,#173153,.T.); +#173151 = VERTEX_POINT('',#173152); +#173152 = CARTESIAN_POINT('',(134.292445,-98.817723,1.585)); +#173153 = LINE('',#173154,#173155); +#173154 = CARTESIAN_POINT('',(134.034431,-98.446618,1.585)); +#173155 = VECTOR('',#173156,1.); +#173156 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#173157 = ORIENTED_EDGE('',*,*,#173158,.T.); +#173158 = EDGE_CURVE('',#173151,#173159,#173161,.T.); +#173159 = VERTEX_POINT('',#173160); +#173160 = CARTESIAN_POINT('',(134.16235,-98.890929,1.585)); +#173161 = CIRCLE('',#173162,7.500005951702E-02); +#173162 = AXIS2_PLACEMENT_3D('',#173163,#173164,#173165); +#173163 = CARTESIAN_POINT('',(134.22379206294,-98.84791874739,1.585)); +#173164 = DIRECTION('',(0.,0.,-1.)); +#173165 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#173166 = ORIENTED_EDGE('',*,*,#173167,.T.); +#173167 = EDGE_CURVE('',#173159,#173168,#173170,.T.); +#173168 = VERTEX_POINT('',#173169); +#173169 = CARTESIAN_POINT('',(133.85141,-98.446728,1.585)); +#173170 = LINE('',#173171,#173172); +#173171 = CARTESIAN_POINT('',(134.16235,-98.890929,1.585)); +#173172 = VECTOR('',#173173,1.); +#173173 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#173174 = ORIENTED_EDGE('',*,*,#173175,.T.); +#173175 = EDGE_CURVE('',#173168,#173176,#173178,.T.); +#173176 = VERTEX_POINT('',#173177); +#173177 = CARTESIAN_POINT('',(133.727364,-98.446728,1.585)); +#173178 = LINE('',#173179,#173180); +#173179 = CARTESIAN_POINT('',(133.85141,-98.446728,1.585)); +#173180 = VECTOR('',#173181,1.); +#173181 = DIRECTION('',(-1.,0.,0.)); +#173182 = ORIENTED_EDGE('',*,*,#173183,.T.); +#173183 = EDGE_CURVE('',#173176,#173184,#173186,.T.); +#173184 = VERTEX_POINT('',#173185); +#173185 = CARTESIAN_POINT('',(133.725923,-98.862551,1.585)); +#173186 = LINE('',#173187,#173188); +#173187 = CARTESIAN_POINT('',(133.727364,-98.446728,1.585)); +#173188 = VECTOR('',#173189,1.); +#173189 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#173190 = ORIENTED_EDGE('',*,*,#173191,.T.); +#173191 = EDGE_CURVE('',#173184,#173192,#173194,.T.); +#173192 = VERTEX_POINT('',#173193); +#173193 = CARTESIAN_POINT('',(133.577364,-98.847919,1.585)); +#173194 = CIRCLE('',#173195,7.500006711464E-02); +#173195 = AXIS2_PLACEMENT_3D('',#173196,#173197,#173198); +#173196 = CARTESIAN_POINT('',(133.65236406711,-98.84791906711,1.585)); +#173197 = DIRECTION('',(-0.,0.,-1.)); +#173198 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#173199 = ORIENTED_EDGE('',*,*,#173200,.T.); +#173200 = EDGE_CURVE('',#173192,#173098,#173201,.T.); +#173201 = LINE('',#173202,#173203); +#173202 = CARTESIAN_POINT('',(133.577364,-98.847919,1.585)); +#173203 = VECTOR('',#173204,1.); +#173204 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#173205 = FACE_BOUND('',#173206,.F.); +#173206 = EDGE_LOOP('',(#173207,#173218,#173226,#173234,#173242,#173251) + ); +#173207 = ORIENTED_EDGE('',*,*,#173208,.T.); +#173208 = EDGE_CURVE('',#173209,#173211,#173213,.T.); +#173209 = VERTEX_POINT('',#173210); +#173210 = CARTESIAN_POINT('',(134.148792,-98.0561,1.585)); +#173211 = VERTEX_POINT('',#173212); +#173212 = CARTESIAN_POINT('',(134.015611,-97.922919,1.585)); +#173213 = CIRCLE('',#173214,0.18686440374); +#173214 = AXIS2_PLACEMENT_3D('',#173215,#173216,#173217); +#173215 = CARTESIAN_POINT('',(133.968075,-98.103636,1.585)); +#173216 = DIRECTION('',(0.,0.,1.)); +#173217 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#173218 = ORIENTED_EDGE('',*,*,#173219,.T.); +#173219 = EDGE_CURVE('',#173211,#173220,#173222,.T.); +#173220 = VERTEX_POINT('',#173221); +#173221 = CARTESIAN_POINT('',(133.727364,-97.922919,1.585)); +#173222 = LINE('',#173223,#173224); +#173223 = CARTESIAN_POINT('',(134.015611,-97.922919,1.585)); +#173224 = VECTOR('',#173225,1.); +#173225 = DIRECTION('',(-1.,0.,0.)); +#173226 = ORIENTED_EDGE('',*,*,#173227,.T.); +#173227 = EDGE_CURVE('',#173220,#173228,#173230,.T.); +#173228 = VERTEX_POINT('',#173229); +#173229 = CARTESIAN_POINT('',(133.727364,-98.296728,1.585)); +#173230 = LINE('',#173231,#173232); +#173231 = CARTESIAN_POINT('',(133.727364,-97.922919,1.585)); +#173232 = VECTOR('',#173233,1.); +#173233 = DIRECTION('',(0.,-1.,0.)); +#173234 = ORIENTED_EDGE('',*,*,#173235,.T.); +#173235 = EDGE_CURVE('',#173228,#173236,#173238,.T.); +#173236 = VERTEX_POINT('',#173237); +#173237 = CARTESIAN_POINT('',(134.015611,-98.296728,1.585)); +#173238 = LINE('',#173239,#173240); +#173239 = CARTESIAN_POINT('',(133.727364,-98.296728,1.585)); +#173240 = VECTOR('',#173241,1.); +#173241 = DIRECTION('',(1.,0.,0.)); +#173242 = ORIENTED_EDGE('',*,*,#173243,.T.); +#173243 = EDGE_CURVE('',#173236,#173244,#173246,.T.); +#173244 = VERTEX_POINT('',#173245); +#173245 = CARTESIAN_POINT('',(134.148792,-98.163547,1.585)); +#173246 = CIRCLE('',#173247,0.18686440374); +#173247 = AXIS2_PLACEMENT_3D('',#173248,#173249,#173250); +#173248 = CARTESIAN_POINT('',(133.968075,-98.116011,1.585)); +#173249 = DIRECTION('',(0.,0.,1.)); +#173250 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#173251 = ORIENTED_EDGE('',*,*,#173252,.T.); +#173252 = EDGE_CURVE('',#173244,#173209,#173253,.T.); +#173253 = LINE('',#173254,#173255); +#173254 = CARTESIAN_POINT('',(134.148792,-98.163547,1.585)); +#173255 = VECTOR('',#173256,1.); +#173256 = DIRECTION('',(0.,1.,0.)); +#173257 = PLANE('',#173258); +#173258 = AXIS2_PLACEMENT_3D('',#173259,#173260,#173261); +#173259 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173260 = DIRECTION('',(0.,0.,1.)); +#173261 = DIRECTION('',(1.,0.,-0.)); +#173262 = SHELL_BASED_SURFACE_MODEL('',(#173263)); +#173263 = OPEN_SHELL('',(#173264)); +#173264 = ADVANCED_FACE('',(#173265),#173326,.T.); +#173265 = FACE_BOUND('',#173266,.F.); +#173266 = EDGE_LOOP('',(#173267,#173278,#173286,#173295,#173303,#173312, + #173320)); +#173267 = ORIENTED_EDGE('',*,*,#173268,.T.); +#173268 = EDGE_CURVE('',#173269,#173271,#173273,.T.); +#173269 = VERTEX_POINT('',#173270); +#173270 = CARTESIAN_POINT('',(135.494875,-97.921478,1.585)); +#173271 = VERTEX_POINT('',#173272); +#173272 = CARTESIAN_POINT('',(135.509507,-97.772919,1.585)); +#173273 = CIRCLE('',#173274,7.500006711463E-02); +#173274 = AXIS2_PLACEMENT_3D('',#173275,#173276,#173277); +#173275 = CARTESIAN_POINT('',(135.50950693288,-97.84791906711,1.585)); +#173276 = DIRECTION('',(0.,0.,-1.)); +#173277 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#173278 = ORIENTED_EDGE('',*,*,#173279,.T.); +#173279 = EDGE_CURVE('',#173271,#173280,#173282,.T.); +#173280 = VERTEX_POINT('',#173281); +#173281 = CARTESIAN_POINT('',(136.190805,-97.77436,1.585)); +#173282 = LINE('',#173283,#173284); +#173283 = CARTESIAN_POINT('',(135.509507,-97.772919,1.585)); +#173284 = VECTOR('',#173285,1.); +#173285 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#173286 = ORIENTED_EDGE('',*,*,#173287,.T.); +#173287 = EDGE_CURVE('',#173280,#173288,#173290,.T.); +#173288 = VERTEX_POINT('',#173289); +#173289 = CARTESIAN_POINT('',(136.245109,-97.877463,1.585)); +#173290 = CIRCLE('',#173291,7.500015546837E-02); +#173291 = AXIS2_PLACEMENT_3D('',#173292,#173293,#173294); +#173292 = CARTESIAN_POINT('',(136.17617297422,-97.84791900449,1.585)); +#173293 = DIRECTION('',(0.,0.,-1.)); +#173294 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#173295 = ORIENTED_EDGE('',*,*,#173296,.T.); +#173296 = EDGE_CURVE('',#173288,#173297,#173299,.T.); +#173297 = VERTEX_POINT('',#173298); +#173298 = CARTESIAN_POINT('',(135.80945,-98.890344,1.585)); +#173299 = LINE('',#173300,#173301); +#173300 = CARTESIAN_POINT('',(136.245109,-97.877463,1.585)); +#173301 = VECTOR('',#173302,1.); +#173302 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#173303 = ORIENTED_EDGE('',*,*,#173304,.T.); +#173304 = EDGE_CURVE('',#173297,#173305,#173307,.T.); +#173305 = VERTEX_POINT('',#173306); +#173306 = CARTESIAN_POINT('',(135.678666,-98.818375,1.585)); +#173307 = CIRCLE('',#173308,7.50003017842E-02); +#173308 = AXIS2_PLACEMENT_3D('',#173309,#173310,#173311); +#173309 = CARTESIAN_POINT('',(135.74760234698,-98.84791861745,1.585)); +#173310 = DIRECTION('',(-0.,0.,-1.)); +#173311 = DIRECTION('',(0.82463205542,-0.565669491111,-0.)); +#173312 = ORIENTED_EDGE('',*,*,#173313,.T.); +#173313 = EDGE_CURVE('',#173305,#173314,#173316,.T.); +#173314 = VERTEX_POINT('',#173315); +#173315 = CARTESIAN_POINT('',(136.062432,-97.922919,1.585)); +#173316 = LINE('',#173317,#173318); +#173317 = CARTESIAN_POINT('',(135.678666,-98.818375,1.585)); +#173318 = VECTOR('',#173319,1.); +#173319 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#173320 = ORIENTED_EDGE('',*,*,#173321,.T.); +#173321 = EDGE_CURVE('',#173314,#173269,#173322,.T.); +#173322 = LINE('',#173323,#173324); +#173323 = CARTESIAN_POINT('',(136.062432,-97.922919,1.585)); +#173324 = VECTOR('',#173325,1.); +#173325 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#173326 = PLANE('',#173327); +#173327 = AXIS2_PLACEMENT_3D('',#173328,#173329,#173330); +#173328 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173329 = DIRECTION('',(0.,0.,1.)); +#173330 = DIRECTION('',(1.,0.,-0.)); +#173331 = SHELL_BASED_SURFACE_MODEL('',(#173332)); +#173332 = OPEN_SHELL('',(#173333)); +#173333 = ADVANCED_FACE('',(#173334),#173570,.T.); +#173334 = FACE_BOUND('',#173335,.F.); +#173335 = EDGE_LOOP('',(#173336,#173347,#173355,#173364,#173372,#173380, + #173388,#173396,#173404,#173412,#173420,#173429,#173437,#173446, + #173454,#173462,#173470,#173479,#173487,#173496,#173504,#173513, + #173521,#173530,#173538,#173547,#173555,#173564)); +#173336 = ORIENTED_EDGE('',*,*,#173337,.T.); +#173337 = EDGE_CURVE('',#173338,#173340,#173342,.T.); +#173338 = VERTEX_POINT('',#173339); +#173339 = CARTESIAN_POINT('',(134.580626,-97.82604,1.585)); +#173340 = VERTEX_POINT('',#173341); +#173341 = CARTESIAN_POINT('',(134.652364,-97.772919,1.585)); +#173342 = CIRCLE('',#173343,7.50033610077E-02); +#173343 = AXIS2_PLACEMENT_3D('',#173344,#173345,#173346); +#173344 = CARTESIAN_POINT('',(134.6523662707,-97.84792236097,1.585)); +#173345 = DIRECTION('',(0.,0.,-1.)); +#173346 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#173347 = ORIENTED_EDGE('',*,*,#173348,.T.); +#173348 = EDGE_CURVE('',#173340,#173349,#173351,.T.); +#173349 = VERTEX_POINT('',#173350); +#173350 = CARTESIAN_POINT('',(135.143186,-97.77436,1.585)); +#173351 = LINE('',#173352,#173353); +#173352 = CARTESIAN_POINT('',(134.652364,-97.772919,1.585)); +#173353 = VECTOR('',#173354,1.); +#173354 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#173355 = ORIENTED_EDGE('',*,*,#173356,.T.); +#173356 = EDGE_CURVE('',#173349,#173357,#173359,.T.); +#173357 = VERTEX_POINT('',#173358); +#173358 = CARTESIAN_POINT('',(135.202113,-97.862551,1.585)); +#173359 = CIRCLE('',#173360,7.500063018462E-02); +#173360 = AXIS2_PLACEMENT_3D('',#173361,#173362,#173363); +#173361 = CARTESIAN_POINT('',(135.12855343069,-97.84791938039,1.585)); +#173362 = DIRECTION('',(0.,0.,-1.)); +#173363 = DIRECTION('',(0.195099284699,0.980783497572,0.)); +#173364 = ORIENTED_EDGE('',*,*,#173365,.T.); +#173365 = EDGE_CURVE('',#173357,#173366,#173368,.T.); +#173366 = VERTEX_POINT('',#173367); +#173367 = CARTESIAN_POINT('',(135.200211,-97.867141,1.585)); +#173368 = LINE('',#173369,#173370); +#173369 = CARTESIAN_POINT('',(135.202113,-97.862551,1.585)); +#173370 = VECTOR('',#173371,1.); +#173371 = DIRECTION('',(-0.382813948798,-0.923825460033,0.)); +#173372 = ORIENTED_EDGE('',*,*,#173373,.T.); +#173373 = EDGE_CURVE('',#173366,#173374,#173376,.T.); +#173374 = VERTEX_POINT('',#173375); +#173375 = CARTESIAN_POINT('',(135.148214,-97.88868,1.585)); +#173376 = LINE('',#173377,#173378); +#173377 = CARTESIAN_POINT('',(135.200211,-97.867141,1.585)); +#173378 = VECTOR('',#173379,1.); +#173379 = DIRECTION('',(-0.923872387372,-0.382700681801,0.)); +#173380 = ORIENTED_EDGE('',*,*,#173381,.T.); +#173381 = EDGE_CURVE('',#173374,#173382,#173384,.T.); +#173382 = VERTEX_POINT('',#173383); +#173383 = CARTESIAN_POINT('',(135.113975,-97.922919,1.585)); +#173384 = LINE('',#173385,#173386); +#173385 = CARTESIAN_POINT('',(135.148214,-97.88868,1.585)); +#173386 = VECTOR('',#173387,1.); +#173387 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#173388 = ORIENTED_EDGE('',*,*,#173389,.T.); +#173389 = EDGE_CURVE('',#173382,#173390,#173392,.T.); +#173390 = VERTEX_POINT('',#173391); +#173391 = CARTESIAN_POINT('',(134.720238,-97.922919,1.585)); +#173392 = LINE('',#173393,#173394); +#173393 = CARTESIAN_POINT('',(135.113975,-97.922919,1.585)); +#173394 = VECTOR('',#173395,1.); +#173395 = DIRECTION('',(-1.,0.,0.)); +#173396 = ORIENTED_EDGE('',*,*,#173397,.T.); +#173397 = EDGE_CURVE('',#173390,#173398,#173400,.T.); +#173398 = VERTEX_POINT('',#173399); +#173399 = CARTESIAN_POINT('',(134.695419,-98.171109,1.585)); +#173400 = LINE('',#173401,#173402); +#173401 = CARTESIAN_POINT('',(134.720238,-97.922919,1.585)); +#173402 = VECTOR('',#173403,1.); +#173403 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#173404 = ORIENTED_EDGE('',*,*,#173405,.T.); +#173405 = EDGE_CURVE('',#173398,#173406,#173408,.T.); +#173406 = VERTEX_POINT('',#173407); +#173407 = CARTESIAN_POINT('',(134.73297,-98.155312,1.585)); +#173408 = LINE('',#173409,#173410); +#173409 = CARTESIAN_POINT('',(134.695419,-98.171109,1.585)); +#173410 = VECTOR('',#173411,1.); +#173411 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#173412 = ORIENTED_EDGE('',*,*,#173413,.T.); +#173413 = EDGE_CURVE('',#173406,#173414,#173416,.T.); +#173414 = VERTEX_POINT('',#173415); +#173415 = CARTESIAN_POINT('',(135.005506,-98.156534,1.585)); +#173416 = LINE('',#173417,#173418); +#173417 = CARTESIAN_POINT('',(134.73297,-98.155312,1.585)); +#173418 = VECTOR('',#173419,1.); +#173419 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#173420 = ORIENTED_EDGE('',*,*,#173421,.T.); +#173421 = EDGE_CURVE('',#173414,#173422,#173424,.T.); +#173422 = VERTEX_POINT('',#173423); +#173423 = CARTESIAN_POINT('',(135.249732,-98.404715,1.585)); +#173424 = CIRCLE('',#173425,0.348625649748); +#173425 = AXIS2_PLACEMENT_3D('',#173426,#173427,#173428); +#173426 = CARTESIAN_POINT('',(134.91233404586,-98.49247868387,1.585)); +#173427 = DIRECTION('',(0.,0.,-1.)); +#173428 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#173429 = ORIENTED_EDGE('',*,*,#173430,.T.); +#173430 = EDGE_CURVE('',#173422,#173431,#173433,.T.); +#173431 = VERTEX_POINT('',#173432); +#173432 = CARTESIAN_POINT('',(135.24851,-98.677252,1.585)); +#173433 = LINE('',#173434,#173435); +#173434 = CARTESIAN_POINT('',(135.249732,-98.404715,1.585)); +#173435 = VECTOR('',#173436,1.); +#173436 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#173437 = ORIENTED_EDGE('',*,*,#173438,.T.); +#173438 = EDGE_CURVE('',#173431,#173439,#173441,.T.); +#173439 = VERTEX_POINT('',#173440); +#173440 = CARTESIAN_POINT('',(135.000329,-98.921478,1.585)); +#173441 = CIRCLE('',#173442,0.348635327447); +#173442 = AXIS2_PLACEMENT_3D('',#173443,#173444,#173445); +#173443 = CARTESIAN_POINT('',(134.91255748129,-98.58407208415,1.585)); +#173444 = DIRECTION('',(0.,0.,-1.)); +#173445 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#173446 = ORIENTED_EDGE('',*,*,#173447,.T.); +#173447 = EDGE_CURVE('',#173439,#173448,#173450,.T.); +#173448 = VERTEX_POINT('',#173449); +#173449 = CARTESIAN_POINT('',(134.727792,-98.920256,1.585)); +#173450 = LINE('',#173451,#173452); +#173451 = CARTESIAN_POINT('',(135.000329,-98.921478,1.585)); +#173452 = VECTOR('',#173453,1.); +#173453 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#173454 = ORIENTED_EDGE('',*,*,#173455,.T.); +#173455 = EDGE_CURVE('',#173448,#173456,#173458,.T.); +#173456 = VERTEX_POINT('',#173457); +#173457 = CARTESIAN_POINT('',(134.629996,-98.870681,1.585)); +#173458 = LINE('',#173459,#173460); +#173459 = CARTESIAN_POINT('',(134.727792,-98.920256,1.585)); +#173460 = VECTOR('',#173461,1.); +#173461 = DIRECTION('',(-0.891943732449,0.452146412288,0.)); +#173462 = ORIENTED_EDGE('',*,*,#173463,.T.); +#173463 = EDGE_CURVE('',#173456,#173464,#173466,.T.); +#173464 = VERTEX_POINT('',#173465); +#173465 = CARTESIAN_POINT('',(134.638868,-98.849264,1.585)); +#173466 = LINE('',#173467,#173468); +#173467 = CARTESIAN_POINT('',(134.629996,-98.870681,1.585)); +#173468 = VECTOR('',#173469,1.); +#173469 = DIRECTION('',(0.382712451158,0.923867512,0.)); +#173470 = ORIENTED_EDGE('',*,*,#173471,.T.); +#173471 = EDGE_CURVE('',#173464,#173472,#173474,.T.); +#173472 = VERTEX_POINT('',#173473); +#173473 = CARTESIAN_POINT('',(134.575086,-98.69528,1.585)); +#173474 = CIRCLE('',#173475,0.149999366947); +#173475 = AXIS2_PLACEMENT_3D('',#173476,#173477,#173478); +#173476 = CARTESIAN_POINT('',(134.49175094324,-98.82,1.585)); +#173477 = DIRECTION('',(0.,-0.,1.)); +#173478 = DIRECTION('',(0.980784517629,-0.1950941567,-0.)); +#173479 = ORIENTED_EDGE('',*,*,#173480,.T.); +#173480 = EDGE_CURVE('',#173472,#173481,#173483,.T.); +#173481 = VERTEX_POINT('',#173482); +#173482 = CARTESIAN_POINT('',(134.563093,-98.690312,1.585)); +#173483 = LINE('',#173484,#173485); +#173484 = CARTESIAN_POINT('',(134.575086,-98.69528,1.585)); +#173485 = VECTOR('',#173486,1.); +#173486 = DIRECTION('',(-0.923870360728,0.382705574259,0.)); +#173487 = ORIENTED_EDGE('',*,*,#173488,.T.); +#173488 = EDGE_CURVE('',#173481,#173489,#173491,.T.); +#173489 = VERTEX_POINT('',#173490); +#173490 = CARTESIAN_POINT('',(134.657779,-98.699648,1.585)); +#173491 = CIRCLE('',#173492,7.499202309587E-02); +#173492 = AXIS2_PLACEMENT_3D('',#173493,#173494,#173495); +#173493 = CARTESIAN_POINT('',(134.60474765317,-98.752671389,1.585)); +#173494 = DIRECTION('',(0.,0.,-1.)); +#173495 = DIRECTION('',(-0.555454453052,0.831546962344,0.)); +#173496 = ORIENTED_EDGE('',*,*,#173497,.T.); +#173497 = EDGE_CURVE('',#173489,#173498,#173500,.T.); +#173498 = VERTEX_POINT('',#173499); +#173499 = CARTESIAN_POINT('',(134.696791,-98.738661,1.585)); +#173500 = LINE('',#173501,#173502); +#173501 = CARTESIAN_POINT('',(134.657779,-98.699648,1.585)); +#173502 = VECTOR('',#173503,1.); +#173503 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#173504 = ORIENTED_EDGE('',*,*,#173505,.T.); +#173505 = EDGE_CURVE('',#173498,#173506,#173508,.T.); +#173506 = VERTEX_POINT('',#173507); +#173507 = CARTESIAN_POINT('',(135.036507,-98.738661,1.585)); +#173508 = CIRCLE('',#173509,0.305620374329); +#173509 = AXIS2_PLACEMENT_3D('',#173510,#173511,#173512); +#173510 = CARTESIAN_POINT('',(134.866649,-98.48459,1.585)); +#173511 = DIRECTION('',(0.,0.,1.)); +#173512 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#173513 = ORIENTED_EDGE('',*,*,#173514,.T.); +#173514 = EDGE_CURVE('',#173506,#173515,#173517,.T.); +#173515 = VERTEX_POINT('',#173516); +#173516 = CARTESIAN_POINT('',(135.066914,-98.708253,1.585)); +#173517 = LINE('',#173518,#173519); +#173518 = CARTESIAN_POINT('',(135.036507,-98.738661,1.585)); +#173519 = VECTOR('',#173520,1.); +#173520 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#173521 = ORIENTED_EDGE('',*,*,#173522,.T.); +#173522 = EDGE_CURVE('',#173515,#173523,#173525,.T.); +#173523 = VERTEX_POINT('',#173524); +#173524 = CARTESIAN_POINT('',(135.066915,-98.368536,1.585)); +#173525 = CIRCLE('',#173526,0.305616146029); +#173526 = AXIS2_PLACEMENT_3D('',#173527,#173528,#173529); +#173527 = CARTESIAN_POINT('',(134.81284892049,-98.53839375212,1.585)); +#173528 = DIRECTION('',(0.,-0.,1.)); +#173529 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#173530 = ORIENTED_EDGE('',*,*,#173531,.T.); +#173531 = EDGE_CURVE('',#173523,#173532,#173534,.T.); +#173532 = VERTEX_POINT('',#173533); +#173533 = CARTESIAN_POINT('',(135.036508,-98.338129,1.585)); +#173534 = LINE('',#173535,#173536); +#173535 = CARTESIAN_POINT('',(135.066915,-98.368536,1.585)); +#173536 = VECTOR('',#173537,1.); +#173537 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#173538 = ORIENTED_EDGE('',*,*,#173539,.T.); +#173539 = EDGE_CURVE('',#173532,#173540,#173542,.T.); +#173540 = VERTEX_POINT('',#173541); +#173541 = CARTESIAN_POINT('',(134.696791,-98.338129,1.585)); +#173542 = CIRCLE('',#173543,0.305621483548); +#173543 = AXIS2_PLACEMENT_3D('',#173544,#173545,#173546); +#173544 = CARTESIAN_POINT('',(134.8666495,-98.592201,1.585)); +#173545 = DIRECTION('',(0.,0.,1.)); +#173546 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#173547 = ORIENTED_EDGE('',*,*,#173548,.T.); +#173548 = EDGE_CURVE('',#173540,#173549,#173551,.T.); +#173549 = VERTEX_POINT('',#173550); +#173550 = CARTESIAN_POINT('',(134.640001,-98.390306,1.585)); +#173551 = LINE('',#173552,#173553); +#173552 = CARTESIAN_POINT('',(134.696791,-98.338129,1.585)); +#173553 = VECTOR('',#173554,1.); +#173554 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#173555 = ORIENTED_EDGE('',*,*,#173556,.T.); +#173556 = EDGE_CURVE('',#173549,#173557,#173559,.T.); +#173557 = VERTEX_POINT('',#173558); +#173558 = CARTESIAN_POINT('',(134.530095,-98.331349,1.585)); +#173559 = CIRCLE('',#173560,7.500024172472E-02); +#173560 = AXIS2_PLACEMENT_3D('',#173561,#173562,#173563); +#173561 = CARTESIAN_POINT('',(134.60474497002,-98.32410895619,1.585)); +#173562 = DIRECTION('',(-0.,0.,-1.)); +#173563 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#173564 = ORIENTED_EDGE('',*,*,#173565,.T.); +#173565 = EDGE_CURVE('',#173557,#173338,#173566,.T.); +#173566 = LINE('',#173567,#173568); +#173567 = CARTESIAN_POINT('',(134.530095,-98.331349,1.585)); +#173568 = VECTOR('',#173569,1.); +#173569 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#173570 = PLANE('',#173571); +#173571 = AXIS2_PLACEMENT_3D('',#173572,#173573,#173574); +#173572 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173573 = DIRECTION('',(0.,0.,1.)); +#173574 = DIRECTION('',(1.,0.,-0.)); +#173575 = SHELL_BASED_SURFACE_MODEL('',(#173576)); +#173576 = OPEN_SHELL('',(#173577)); +#173577 = ADVANCED_FACE('',(#173578),#173737,.T.); +#173578 = FACE_BOUND('',#173579,.F.); +#173579 = EDGE_LOOP('',(#173580,#173591,#173599,#173607,#173615,#173623, + #173631,#173639,#173648,#173656,#173665,#173673,#173681,#173689, + #173698,#173706,#173714,#173722,#173731)); +#173580 = ORIENTED_EDGE('',*,*,#173581,.T.); +#173581 = EDGE_CURVE('',#173582,#173584,#173586,.T.); +#173582 = VERTEX_POINT('',#173583); +#173583 = CARTESIAN_POINT('',(89.778364,-97.635356,1.585)); +#173584 = VERTEX_POINT('',#173585); +#173585 = CARTESIAN_POINT('',(90.287759,-97.644686,1.585)); +#173586 = CIRCLE('',#173587,0.450326844012); +#173587 = AXIS2_PLACEMENT_3D('',#173588,#173589,#173590); +#173588 = CARTESIAN_POINT('',(90.026261030105,-98.01130989199,1.585)); +#173589 = DIRECTION('',(0.,0.,-1.)); +#173590 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#173591 = ORIENTED_EDGE('',*,*,#173592,.T.); +#173592 = EDGE_CURVE('',#173584,#173593,#173595,.T.); +#173593 = VERTEX_POINT('',#173594); +#173594 = CARTESIAN_POINT('',(90.351212,-97.710216,1.585)); +#173595 = LINE('',#173596,#173597); +#173596 = CARTESIAN_POINT('',(90.287759,-97.644686,1.585)); +#173597 = VECTOR('',#173598,1.); +#173598 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#173599 = ORIENTED_EDGE('',*,*,#173600,.T.); +#173600 = EDGE_CURVE('',#173593,#173601,#173603,.T.); +#173601 = VERTEX_POINT('',#173602); +#173602 = CARTESIAN_POINT('',(90.409273,-97.830663,1.585)); +#173603 = LINE('',#173604,#173605); +#173604 = CARTESIAN_POINT('',(90.351212,-97.710216,1.585)); +#173605 = VECTOR('',#173606,1.); +#173606 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#173607 = ORIENTED_EDGE('',*,*,#173608,.T.); +#173608 = EDGE_CURVE('',#173601,#173609,#173611,.T.); +#173609 = VERTEX_POINT('',#173610); +#173610 = CARTESIAN_POINT('',(90.408514,-97.956995,1.585)); +#173611 = LINE('',#173612,#173613); +#173612 = CARTESIAN_POINT('',(90.409273,-97.830663,1.585)); +#173613 = VECTOR('',#173614,1.); +#173614 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#173615 = ORIENTED_EDGE('',*,*,#173616,.T.); +#173616 = EDGE_CURVE('',#173609,#173617,#173619,.T.); +#173617 = VERTEX_POINT('',#173618); +#173618 = CARTESIAN_POINT('',(90.350456,-98.125058,1.585)); +#173619 = LINE('',#173620,#173621); +#173620 = CARTESIAN_POINT('',(90.408514,-97.956995,1.585)); +#173621 = VECTOR('',#173622,1.); +#173622 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#173623 = ORIENTED_EDGE('',*,*,#173624,.T.); +#173624 = EDGE_CURVE('',#173617,#173625,#173627,.T.); +#173625 = VERTEX_POINT('',#173626); +#173626 = CARTESIAN_POINT('',(89.897733,-98.579819,1.585)); +#173627 = LINE('',#173628,#173629); +#173628 = CARTESIAN_POINT('',(90.350456,-98.125058,1.585)); +#173629 = VECTOR('',#173630,1.); +#173630 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#173631 = ORIENTED_EDGE('',*,*,#173632,.T.); +#173632 = EDGE_CURVE('',#173625,#173633,#173635,.T.); +#173633 = VERTEX_POINT('',#173634); +#173634 = CARTESIAN_POINT('',(90.350346,-98.58126,1.585)); +#173635 = LINE('',#173636,#173637); +#173636 = CARTESIAN_POINT('',(89.897733,-98.579819,1.585)); +#173637 = VECTOR('',#173638,1.); +#173638 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#173639 = ORIENTED_EDGE('',*,*,#173640,.T.); +#173640 = EDGE_CURVE('',#173633,#173641,#173643,.T.); +#173641 = VERTEX_POINT('',#173642); +#173642 = CARTESIAN_POINT('',(90.335714,-98.729819,1.585)); +#173643 = CIRCLE('',#173644,7.500006711464E-02); +#173644 = AXIS2_PLACEMENT_3D('',#173645,#173646,#173647); +#173645 = CARTESIAN_POINT('',(90.335714067115,-98.65481893288,1.585)); +#173646 = DIRECTION('',(0.,0.,-1.)); +#173647 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#173648 = ORIENTED_EDGE('',*,*,#173649,.T.); +#173649 = EDGE_CURVE('',#173641,#173650,#173652,.T.); +#173650 = VERTEX_POINT('',#173651); +#173651 = CARTESIAN_POINT('',(89.702035,-98.728378,1.585)); +#173652 = LINE('',#173653,#173654); +#173653 = CARTESIAN_POINT('',(90.335714,-98.729819,1.585)); +#173654 = VECTOR('',#173655,1.); +#173655 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#173656 = ORIENTED_EDGE('',*,*,#173657,.T.); +#173657 = EDGE_CURVE('',#173650,#173658,#173660,.T.); +#173658 = VERTEX_POINT('',#173659); +#173659 = CARTESIAN_POINT('',(89.663634,-98.601786,1.585)); +#173660 = CIRCLE('',#173661,7.50002101311E-02); +#173661 = AXIS2_PLACEMENT_3D('',#173662,#173663,#173664); +#173662 = CARTESIAN_POINT('',(89.716667316704,-98.65481899764,1.585)); +#173663 = DIRECTION('',(0.,0.,-1.)); +#173664 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#173665 = ORIENTED_EDGE('',*,*,#173666,.T.); +#173666 = EDGE_CURVE('',#173658,#173667,#173669,.T.); +#173667 = VERTEX_POINT('',#173668); +#173668 = CARTESIAN_POINT('',(90.222542,-98.042876,1.585)); +#173669 = LINE('',#173670,#173671); +#173670 = CARTESIAN_POINT('',(89.663634,-98.601786,1.585)); +#173671 = VECTOR('',#173672,1.); +#173672 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#173673 = ORIENTED_EDGE('',*,*,#173674,.T.); +#173674 = EDGE_CURVE('',#173667,#173675,#173677,.T.); +#173675 = VERTEX_POINT('',#173676); +#173676 = CARTESIAN_POINT('',(90.260714,-97.928363,1.585)); +#173677 = LINE('',#173678,#173679); +#173678 = CARTESIAN_POINT('',(90.222542,-98.042876,1.585)); +#173679 = VECTOR('',#173680,1.); +#173680 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#173681 = ORIENTED_EDGE('',*,*,#173682,.T.); +#173682 = EDGE_CURVE('',#173675,#173683,#173685,.T.); +#173683 = VERTEX_POINT('',#173684); +#173684 = CARTESIAN_POINT('',(90.260714,-97.863,1.585)); +#173685 = LINE('',#173686,#173687); +#173686 = CARTESIAN_POINT('',(90.260714,-97.928363,1.585)); +#173687 = VECTOR('',#173688,1.); +#173688 = DIRECTION('',(0.,1.,0.)); +#173689 = ORIENTED_EDGE('',*,*,#173690,.T.); +#173690 = EDGE_CURVE('',#173683,#173691,#173693,.T.); +#173691 = VERTEX_POINT('',#173692); +#173692 = CARTESIAN_POINT('',(90.127533,-97.729819,1.585)); +#173693 = CIRCLE('',#173694,0.18686440374); +#173694 = AXIS2_PLACEMENT_3D('',#173695,#173696,#173697); +#173695 = CARTESIAN_POINT('',(90.079997,-97.910536,1.585)); +#173696 = DIRECTION('',(0.,0.,1.)); +#173697 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#173698 = ORIENTED_EDGE('',*,*,#173699,.T.); +#173699 = EDGE_CURVE('',#173691,#173700,#173702,.T.); +#173700 = VERTEX_POINT('',#173701); +#173701 = CARTESIAN_POINT('',(89.924848,-97.729819,1.585)); +#173702 = LINE('',#173703,#173704); +#173703 = CARTESIAN_POINT('',(90.127533,-97.729819,1.585)); +#173704 = VECTOR('',#173705,1.); +#173705 = DIRECTION('',(-1.,0.,0.)); +#173706 = ORIENTED_EDGE('',*,*,#173707,.T.); +#173707 = EDGE_CURVE('',#173700,#173708,#173710,.T.); +#173708 = VERTEX_POINT('',#173709); +#173709 = CARTESIAN_POINT('',(89.856332,-97.764077,1.585)); +#173710 = LINE('',#173711,#173712); +#173711 = CARTESIAN_POINT('',(89.924848,-97.729819,1.585)); +#173712 = VECTOR('',#173713,1.); +#173713 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#173714 = ORIENTED_EDGE('',*,*,#173715,.T.); +#173715 = EDGE_CURVE('',#173708,#173716,#173718,.T.); +#173716 = VERTEX_POINT('',#173717); +#173717 = CARTESIAN_POINT('',(89.805954,-97.812417,1.585)); +#173718 = LINE('',#173719,#173720); +#173719 = CARTESIAN_POINT('',(89.856332,-97.764077,1.585)); +#173720 = VECTOR('',#173721,1.); +#173721 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#173722 = ORIENTED_EDGE('',*,*,#173723,.T.); +#173723 = EDGE_CURVE('',#173716,#173724,#173726,.T.); +#173724 = VERTEX_POINT('',#173725); +#173725 = CARTESIAN_POINT('',(89.711253,-97.697024,1.585)); +#173726 = CIRCLE('',#173727,7.499996838527E-02); +#173727 = AXIS2_PLACEMENT_3D('',#173728,#173729,#173730); +#173728 = CARTESIAN_POINT('',(89.764286,-97.75005697246,1.585)); +#173729 = DIRECTION('',(0.,0.,-1.)); +#173730 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#173731 = ORIENTED_EDGE('',*,*,#173732,.T.); +#173732 = EDGE_CURVE('',#173724,#173582,#173733,.T.); +#173733 = LINE('',#173734,#173735); +#173734 = CARTESIAN_POINT('',(89.711253,-97.697024,1.585)); +#173735 = VECTOR('',#173736,1.); +#173736 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#173737 = PLANE('',#173738); +#173738 = AXIS2_PLACEMENT_3D('',#173739,#173740,#173741); +#173739 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173740 = DIRECTION('',(0.,0.,1.)); +#173741 = DIRECTION('',(1.,0.,-0.)); +#173742 = SHELL_BASED_SURFACE_MODEL('',(#173743)); +#173743 = OPEN_SHELL('',(#173744)); +#173744 = ADVANCED_FACE('',(#173745,#173894),#173977,.T.); +#173745 = FACE_BOUND('',#173746,.F.); +#173746 = EDGE_LOOP('',(#173747,#173758,#173766,#173774,#173782,#173790, + #173798,#173806,#173814,#173822,#173830,#173838,#173846,#173855, + #173863,#173871,#173880,#173888)); +#173747 = ORIENTED_EDGE('',*,*,#173748,.T.); +#173748 = EDGE_CURVE('',#173749,#173751,#173753,.T.); +#173749 = VERTEX_POINT('',#173750); +#173750 = CARTESIAN_POINT('',(88.738346,-97.640187,1.585)); +#173751 = VERTEX_POINT('',#173752); +#173752 = CARTESIAN_POINT('',(88.811905,-97.579819,1.585)); +#173753 = CIRCLE('',#173754,7.500074938981E-02); +#173754 = AXIS2_PLACEMENT_3D('',#173755,#173756,#173757); +#173755 = CARTESIAN_POINT('',(88.81190546611,-97.65481974938,1.585)); +#173756 = DIRECTION('',(0.,0.,-1.)); +#173757 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#173758 = ORIENTED_EDGE('',*,*,#173759,.T.); +#173759 = EDGE_CURVE('',#173751,#173760,#173762,.T.); +#173760 = VERTEX_POINT('',#173761); +#173761 = CARTESIAN_POINT('',(89.057405,-97.580548,1.585)); +#173762 = LINE('',#173763,#173764); +#173763 = CARTESIAN_POINT('',(88.811905,-97.579819,1.585)); +#173764 = VECTOR('',#173765,1.); +#173765 = DIRECTION('',(0.999995591212,-2.969437010128E-03,0.)); +#173766 = ORIENTED_EDGE('',*,*,#173767,.T.); +#173767 = EDGE_CURVE('',#173760,#173768,#173770,.T.); +#173768 = VERTEX_POINT('',#173769); +#173769 = CARTESIAN_POINT('',(89.234525,-97.640078,1.585)); +#173770 = LINE('',#173771,#173772); +#173771 = CARTESIAN_POINT('',(89.057405,-97.580548,1.585)); +#173772 = VECTOR('',#173773,1.); +#173773 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#173774 = ORIENTED_EDGE('',*,*,#173775,.T.); +#173775 = EDGE_CURVE('',#173768,#173776,#173778,.T.); +#173776 = VERTEX_POINT('',#173777); +#173777 = CARTESIAN_POINT('',(89.351214,-97.75784,1.585)); +#173778 = LINE('',#173779,#173780); +#173779 = CARTESIAN_POINT('',(89.234525,-97.640078,1.585)); +#173780 = VECTOR('',#173781,1.); +#173781 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#173782 = ORIENTED_EDGE('',*,*,#173783,.T.); +#173783 = EDGE_CURVE('',#173776,#173784,#173786,.T.); +#173784 = VERTEX_POINT('',#173785); +#173785 = CARTESIAN_POINT('',(89.408475,-97.874724,1.585)); +#173786 = LINE('',#173787,#173788); +#173787 = CARTESIAN_POINT('',(89.351214,-97.75784,1.585)); +#173788 = VECTOR('',#173789,1.); +#173789 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#173790 = ORIENTED_EDGE('',*,*,#173791,.T.); +#173791 = EDGE_CURVE('',#173784,#173792,#173794,.T.); +#173792 = VERTEX_POINT('',#173793); +#173793 = CARTESIAN_POINT('',(89.458333,-98.08339,1.585)); +#173794 = LINE('',#173795,#173796); +#173795 = CARTESIAN_POINT('',(89.408475,-97.874724,1.585)); +#173796 = VECTOR('',#173797,1.); +#173797 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#173798 = ORIENTED_EDGE('',*,*,#173799,.T.); +#173799 = EDGE_CURVE('',#173792,#173800,#173802,.T.); +#173800 = VERTEX_POINT('',#173801); +#173801 = CARTESIAN_POINT('',(89.456094,-98.244437,1.585)); +#173802 = LINE('',#173803,#173804); +#173803 = CARTESIAN_POINT('',(89.458333,-98.08339,1.585)); +#173804 = VECTOR('',#173805,1.); +#173805 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#173806 = ORIENTED_EDGE('',*,*,#173807,.T.); +#173807 = EDGE_CURVE('',#173800,#173808,#173810,.T.); +#173808 = VERTEX_POINT('',#173809); +#173809 = CARTESIAN_POINT('',(89.402796,-98.450264,1.585)); +#173810 = LINE('',#173811,#173812); +#173811 = CARTESIAN_POINT('',(89.456094,-98.244437,1.585)); +#173812 = VECTOR('',#173813,1.); +#173813 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#173814 = ORIENTED_EDGE('',*,*,#173815,.T.); +#173815 = EDGE_CURVE('',#173808,#173816,#173818,.T.); +#173816 = VERTEX_POINT('',#173817); +#173817 = CARTESIAN_POINT('',(89.345846,-98.559244,1.585)); +#173818 = LINE('',#173819,#173820); +#173819 = CARTESIAN_POINT('',(89.402796,-98.450264,1.585)); +#173820 = VECTOR('',#173821,1.); +#173821 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#173822 = ORIENTED_EDGE('',*,*,#173823,.T.); +#173823 = EDGE_CURVE('',#173816,#173824,#173826,.T.); +#173824 = VERTEX_POINT('',#173825); +#173825 = CARTESIAN_POINT('',(89.229999,-98.672357,1.585)); +#173826 = LINE('',#173827,#173828); +#173827 = CARTESIAN_POINT('',(89.345846,-98.559244,1.585)); +#173828 = VECTOR('',#173829,1.); +#173829 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#173830 = ORIENTED_EDGE('',*,*,#173831,.T.); +#173831 = EDGE_CURVE('',#173824,#173832,#173834,.T.); +#173832 = VERTEX_POINT('',#173833); +#173833 = CARTESIAN_POINT('',(89.057405,-98.729089,1.585)); +#173834 = LINE('',#173835,#173836); +#173835 = CARTESIAN_POINT('',(89.229999,-98.672357,1.585)); +#173836 = VECTOR('',#173837,1.); +#173837 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#173838 = ORIENTED_EDGE('',*,*,#173839,.T.); +#173839 = EDGE_CURVE('',#173832,#173840,#173842,.T.); +#173840 = VERTEX_POINT('',#173841); +#173841 = CARTESIAN_POINT('',(88.797273,-98.728378,1.585)); +#173842 = LINE('',#173843,#173844); +#173843 = CARTESIAN_POINT('',(89.057405,-98.729089,1.585)); +#173844 = VECTOR('',#173845,1.); +#173845 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#173846 = ORIENTED_EDGE('',*,*,#173847,.T.); +#173847 = EDGE_CURVE('',#173840,#173848,#173850,.T.); +#173848 = VERTEX_POINT('',#173849); +#173849 = CARTESIAN_POINT('',(88.736905,-98.654819,1.585)); +#173850 = CIRCLE('',#173851,7.500074938985E-02); +#173851 = AXIS2_PLACEMENT_3D('',#173852,#173853,#173854); +#173852 = CARTESIAN_POINT('',(88.811905749388,-98.65481853389,1.585)); +#173853 = DIRECTION('',(0.,0.,-1.)); +#173854 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#173855 = ORIENTED_EDGE('',*,*,#173856,.T.); +#173856 = EDGE_CURVE('',#173848,#173857,#173859,.T.); +#173857 = VERTEX_POINT('',#173858); +#173858 = CARTESIAN_POINT('',(88.737998,-97.884807,1.585)); +#173859 = LINE('',#173860,#173861); +#173860 = CARTESIAN_POINT('',(88.736905,-98.654819,1.585)); +#173861 = VECTOR('',#173862,1.); +#173862 = DIRECTION('',(1.419456968062E-03,0.99999899257,0.)); +#173863 = ORIENTED_EDGE('',*,*,#173864,.T.); +#173864 = EDGE_CURVE('',#173857,#173865,#173867,.T.); +#173865 = VERTEX_POINT('',#173866); +#173866 = CARTESIAN_POINT('',(88.76637,-97.856436,1.585)); +#173867 = LINE('',#173868,#173869); +#173868 = CARTESIAN_POINT('',(88.737998,-97.884807,1.585)); +#173869 = VECTOR('',#173870,1.); +#173870 = DIRECTION('',(0.707119242645,0.707094319508,0.)); +#173871 = ORIENTED_EDGE('',*,*,#173872,.T.); +#173872 = EDGE_CURVE('',#173865,#173873,#173875,.T.); +#173873 = VERTEX_POINT('',#173874); +#173874 = CARTESIAN_POINT('',(88.76637,-97.689764,1.585)); +#173875 = CIRCLE('',#173876,0.149997657637); +#173876 = AXIS2_PLACEMENT_3D('',#173877,#173878,#173879); +#173877 = CARTESIAN_POINT('',(88.641652686043,-97.7731,1.585)); +#173878 = DIRECTION('',(0.,-0.,1.)); +#173879 = DIRECTION('',(0.831461743613,-0.555582009166,-0.)); +#173880 = ORIENTED_EDGE('',*,*,#173881,.T.); +#173881 = EDGE_CURVE('',#173873,#173882,#173884,.T.); +#173882 = VERTEX_POINT('',#173883); +#173883 = CARTESIAN_POINT('',(88.738315,-97.661709,1.585)); +#173884 = LINE('',#173885,#173886); +#173885 = CARTESIAN_POINT('',(88.76637,-97.689764,1.585)); +#173886 = VECTOR('',#173887,1.); +#173887 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#173888 = ORIENTED_EDGE('',*,*,#173889,.T.); +#173889 = EDGE_CURVE('',#173882,#173749,#173890,.T.); +#173890 = LINE('',#173891,#173892); +#173891 = CARTESIAN_POINT('',(88.738315,-97.661709,1.585)); +#173892 = VECTOR('',#173893,1.); +#173893 = DIRECTION('',(1.440385087305E-03,0.999998962645,0.)); +#173894 = FACE_BOUND('',#173895,.F.); +#173895 = EDGE_LOOP('',(#173896,#173906,#173914,#173922,#173930,#173938, + #173946,#173955,#173963,#173971)); +#173896 = ORIENTED_EDGE('',*,*,#173897,.T.); +#173897 = EDGE_CURVE('',#173898,#173900,#173902,.T.); +#173898 = VERTEX_POINT('',#173899); +#173899 = CARTESIAN_POINT('',(89.152343,-97.76799,1.585)); +#173900 = VERTEX_POINT('',#173901); +#173901 = CARTESIAN_POINT('',(89.03783,-97.729819,1.585)); +#173902 = LINE('',#173903,#173904); +#173903 = CARTESIAN_POINT('',(89.152343,-97.76799,1.585)); +#173904 = VECTOR('',#173905,1.); +#173905 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#173906 = ORIENTED_EDGE('',*,*,#173907,.T.); +#173907 = EDGE_CURVE('',#173900,#173908,#173910,.T.); +#173908 = VERTEX_POINT('',#173909); +#173909 = CARTESIAN_POINT('',(88.886905,-97.729819,1.585)); +#173910 = LINE('',#173911,#173912); +#173911 = CARTESIAN_POINT('',(89.03783,-97.729819,1.585)); +#173912 = VECTOR('',#173913,1.); +#173913 = DIRECTION('',(-1.,0.,0.)); +#173914 = ORIENTED_EDGE('',*,*,#173915,.T.); +#173915 = EDGE_CURVE('',#173908,#173916,#173918,.T.); +#173916 = VERTEX_POINT('',#173917); +#173917 = CARTESIAN_POINT('',(88.886905,-98.579819,1.585)); +#173918 = LINE('',#173919,#173920); +#173919 = CARTESIAN_POINT('',(88.886905,-97.729819,1.585)); +#173920 = VECTOR('',#173921,1.); +#173921 = DIRECTION('',(0.,-1.,0.)); +#173922 = ORIENTED_EDGE('',*,*,#173923,.T.); +#173923 = EDGE_CURVE('',#173916,#173924,#173926,.T.); +#173924 = VERTEX_POINT('',#173925); +#173925 = CARTESIAN_POINT('',(89.03783,-98.579819,1.585)); +#173926 = LINE('',#173927,#173928); +#173927 = CARTESIAN_POINT('',(88.886905,-98.579819,1.585)); +#173928 = VECTOR('',#173929,1.); +#173929 = DIRECTION('',(1.,0.,0.)); +#173930 = ORIENTED_EDGE('',*,*,#173931,.T.); +#173931 = EDGE_CURVE('',#173924,#173932,#173934,.T.); +#173932 = VERTEX_POINT('',#173933); +#173933 = CARTESIAN_POINT('',(89.152343,-98.541647,1.585)); +#173934 = LINE('',#173935,#173936); +#173935 = CARTESIAN_POINT('',(89.03783,-98.579819,1.585)); +#173936 = VECTOR('',#173937,1.); +#173937 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#173938 = ORIENTED_EDGE('',*,*,#173939,.T.); +#173939 = EDGE_CURVE('',#173932,#173940,#173942,.T.); +#173940 = VERTEX_POINT('',#173941); +#173941 = CARTESIAN_POINT('',(89.226455,-98.467534,1.585)); +#173942 = LINE('',#173943,#173944); +#173943 = CARTESIAN_POINT('',(89.152343,-98.541647,1.585)); +#173944 = VECTOR('',#173945,1.); +#173945 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#173946 = ORIENTED_EDGE('',*,*,#173947,.T.); +#173947 = EDGE_CURVE('',#173940,#173948,#173950,.T.); +#173948 = VERTEX_POINT('',#173949); +#173949 = CARTESIAN_POINT('',(89.308333,-98.092624,1.585)); +#173950 = CIRCLE('',#173951,0.611719141131); +#173951 = AXIS2_PLACEMENT_3D('',#173952,#173953,#173954); +#173952 = CARTESIAN_POINT('',(88.699920962242,-98.15614643649,1.585)); +#173953 = DIRECTION('',(0.,0.,1.)); +#173954 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#173955 = ORIENTED_EDGE('',*,*,#173956,.T.); +#173956 = EDGE_CURVE('',#173948,#173957,#173959,.T.); +#173957 = VERTEX_POINT('',#173958); +#173958 = CARTESIAN_POINT('',(89.264949,-97.91909,1.585)); +#173959 = LINE('',#173960,#173961); +#173960 = CARTESIAN_POINT('',(89.308333,-98.092624,1.585)); +#173961 = VECTOR('',#173962,1.); +#173962 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#173963 = ORIENTED_EDGE('',*,*,#173964,.T.); +#173964 = EDGE_CURVE('',#173957,#173965,#173967,.T.); +#173965 = VERTEX_POINT('',#173966); +#173966 = CARTESIAN_POINT('',(89.226456,-97.842103,1.585)); +#173967 = LINE('',#173968,#173969); +#173968 = CARTESIAN_POINT('',(89.264949,-97.91909,1.585)); +#173969 = VECTOR('',#173970,1.); +#173970 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#173971 = ORIENTED_EDGE('',*,*,#173972,.T.); +#173972 = EDGE_CURVE('',#173965,#173898,#173973,.T.); +#173973 = LINE('',#173974,#173975); +#173974 = CARTESIAN_POINT('',(89.226456,-97.842103,1.585)); +#173975 = VECTOR('',#173976,1.); +#173976 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#173977 = PLANE('',#173978); +#173978 = AXIS2_PLACEMENT_3D('',#173979,#173980,#173981); +#173979 = CARTESIAN_POINT('',(0.,0.,1.585)); +#173980 = DIRECTION('',(0.,0.,1.)); +#173981 = DIRECTION('',(1.,0.,-0.)); +#173982 = SHELL_BASED_SURFACE_MODEL('',(#173983)); +#173983 = OPEN_SHELL('',(#173984)); +#173984 = ADVANCED_FACE('',(#173985),#174071,.T.); +#173985 = FACE_BOUND('',#173986,.F.); +#173986 = EDGE_LOOP('',(#173987,#173998,#174006,#174015,#174023,#174032, + #174040,#174049,#174057,#174065)); +#173987 = ORIENTED_EDGE('',*,*,#173988,.T.); +#173988 = EDGE_CURVE('',#173989,#173991,#173993,.T.); +#173989 = VERTEX_POINT('',#173990); +#173990 = CARTESIAN_POINT('',(140.516648,-97.415559,1.585)); +#173991 = VERTEX_POINT('',#173992); +#173992 = CARTESIAN_POINT('',(140.633316,-97.477919,1.585)); +#173993 = CIRCLE('',#173994,7.500000000004E-02); +#173994 = AXIS2_PLACEMENT_3D('',#173995,#173996,#173997); +#173995 = CARTESIAN_POINT('',(140.558316,-97.47791906555,1.585)); +#173996 = DIRECTION('',(0.,0.,-1.)); +#173997 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#173998 = ORIENTED_EDGE('',*,*,#173999,.T.); +#173999 = EDGE_CURVE('',#173991,#174000,#174002,.T.); +#174000 = VERTEX_POINT('',#174001); +#174001 = CARTESIAN_POINT('',(140.631116,-98.208666,1.585)); +#174002 = LINE('',#174003,#174004); +#174003 = CARTESIAN_POINT('',(140.633316,-97.477919,1.585)); +#174004 = VECTOR('',#174005,1.); +#174005 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#174006 = ORIENTED_EDGE('',*,*,#174007,.T.); +#174007 = EDGE_CURVE('',#174000,#174008,#174010,.T.); +#174008 = VERTEX_POINT('',#174009); +#174009 = CARTESIAN_POINT('',(140.280007,-98.552189,1.585)); +#174010 = CIRCLE('',#174011,0.38184101318); +#174011 = AXIS2_PLACEMENT_3D('',#174012,#174013,#174014); +#174012 = CARTESIAN_POINT('',(140.25109350032,-98.17144424444,1.585)); +#174013 = DIRECTION('',(0.,0.,-1.)); +#174014 = DIRECTION('',(0.995237511316,-9.747972132576E-02,0.)); +#174015 = ORIENTED_EDGE('',*,*,#174016,.T.); +#174016 = EDGE_CURVE('',#174008,#174017,#174019,.T.); +#174017 = VERTEX_POINT('',#174018); +#174018 = CARTESIAN_POINT('',(140.162732,-98.551478,1.585)); +#174019 = LINE('',#174020,#174021); +#174020 = CARTESIAN_POINT('',(140.280007,-98.552189,1.585)); +#174021 = VECTOR('',#174022,1.); +#174022 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#174023 = ORIENTED_EDGE('',*,*,#174024,.T.); +#174024 = EDGE_CURVE('',#174017,#174025,#174027,.T.); +#174025 = VERTEX_POINT('',#174026); +#174026 = CARTESIAN_POINT('',(140.177364,-98.402919,1.585)); +#174027 = CIRCLE('',#174028,7.500006711464E-02); +#174028 = AXIS2_PLACEMENT_3D('',#174029,#174030,#174031); +#174029 = CARTESIAN_POINT('',(140.17736393288,-98.47791906711,1.585)); +#174030 = DIRECTION('',(0.,0.,-1.)); +#174031 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#174032 = ORIENTED_EDGE('',*,*,#174033,.T.); +#174033 = EDGE_CURVE('',#174025,#174034,#174036,.T.); +#174034 = VERTEX_POINT('',#174035); +#174035 = CARTESIAN_POINT('',(140.260432,-98.402919,1.585)); +#174036 = LINE('',#174037,#174038); +#174037 = CARTESIAN_POINT('',(140.177364,-98.402919,1.585)); +#174038 = VECTOR('',#174039,1.); +#174039 = DIRECTION('',(1.,0.,0.)); +#174040 = ORIENTED_EDGE('',*,*,#174041,.T.); +#174041 = EDGE_CURVE('',#174034,#174042,#174044,.T.); +#174042 = VERTEX_POINT('',#174043); +#174043 = CARTESIAN_POINT('',(140.483316,-98.180034,1.585)); +#174044 = CIRCLE('',#174045,0.239437351684); +#174045 = AXIS2_PLACEMENT_3D('',#174046,#174047,#174048); +#174046 = CARTESIAN_POINT('',(140.24441490658,-98.16401797844,1.585)); +#174047 = DIRECTION('',(0.,0.,1.)); +#174048 = DIRECTION('',(6.689471506024E-02,-0.997760039838,0.)); +#174049 = ORIENTED_EDGE('',*,*,#174050,.T.); +#174050 = EDGE_CURVE('',#174042,#174051,#174053,.T.); +#174051 = VERTEX_POINT('',#174052); +#174052 = CARTESIAN_POINT('',(140.484757,-97.463287,1.585)); +#174053 = LINE('',#174054,#174055); +#174054 = CARTESIAN_POINT('',(140.483316,-98.180034,1.585)); +#174055 = VECTOR('',#174056,1.); +#174056 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#174057 = ORIENTED_EDGE('',*,*,#174058,.T.); +#174058 = EDGE_CURVE('',#174051,#174059,#174061,.T.); +#174059 = VERTEX_POINT('',#174060); +#174060 = CARTESIAN_POINT('',(140.495956,-97.436251,1.585)); +#174061 = LINE('',#174062,#174063); +#174062 = CARTESIAN_POINT('',(140.484757,-97.463287,1.585)); +#174063 = VECTOR('',#174064,1.); +#174064 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#174065 = ORIENTED_EDGE('',*,*,#174066,.T.); +#174066 = EDGE_CURVE('',#174059,#173989,#174067,.T.); +#174067 = LINE('',#174068,#174069); +#174068 = CARTESIAN_POINT('',(140.495956,-97.436251,1.585)); +#174069 = VECTOR('',#174070,1.); +#174070 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#174071 = PLANE('',#174072); +#174072 = AXIS2_PLACEMENT_3D('',#174073,#174074,#174075); +#174073 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174074 = DIRECTION('',(0.,0.,1.)); +#174075 = DIRECTION('',(1.,0.,-0.)); +#174076 = SHELL_BASED_SURFACE_MODEL('',(#174077)); +#174077 = OPEN_SHELL('',(#174078)); +#174078 = ADVANCED_FACE('',(#174079,#174157),#174209,.T.); +#174079 = FACE_BOUND('',#174080,.F.); +#174080 = EDGE_LOOP('',(#174081,#174092,#174100,#174109,#174117,#174126, + #174134,#174142,#174151)); +#174081 = ORIENTED_EDGE('',*,*,#174082,.T.); +#174082 = EDGE_CURVE('',#174083,#174085,#174087,.T.); +#174083 = VERTEX_POINT('',#174084); +#174084 = CARTESIAN_POINT('',(140.960948,-97.463287,1.585)); +#174085 = VERTEX_POINT('',#174086); +#174086 = CARTESIAN_POINT('',(141.034507,-97.402919,1.585)); +#174087 = CIRCLE('',#174088,7.500074938991E-02); +#174088 = AXIS2_PLACEMENT_3D('',#174089,#174090,#174091); +#174089 = CARTESIAN_POINT('',(141.03450746611,-97.47791974938,1.585)); +#174090 = DIRECTION('',(0.,0.,-1.)); +#174091 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#174092 = ORIENTED_EDGE('',*,*,#174093,.T.); +#174093 = EDGE_CURVE('',#174085,#174094,#174096,.T.); +#174094 = VERTEX_POINT('',#174095); +#174095 = CARTESIAN_POINT('',(141.430091,-97.40436,1.585)); +#174096 = LINE('',#174097,#174098); +#174097 = CARTESIAN_POINT('',(141.034507,-97.402919,1.585)); +#174098 = VECTOR('',#174099,1.); +#174099 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#174100 = ORIENTED_EDGE('',*,*,#174101,.T.); +#174101 = EDGE_CURVE('',#174094,#174102,#174104,.T.); +#174102 = VERTEX_POINT('',#174103); +#174103 = CARTESIAN_POINT('',(141.679494,-97.653763,1.585)); +#174104 = CIRCLE('',#174105,0.347870264855); +#174105 = AXIS2_PLACEMENT_3D('',#174106,#174107,#174108); +#174106 = CARTESIAN_POINT('',(141.34276326502,-97.74109073497,1.585)); +#174107 = DIRECTION('',(0.,0.,-1.)); +#174108 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#174109 = ORIENTED_EDGE('',*,*,#174110,.T.); +#174110 = EDGE_CURVE('',#174102,#174111,#174113,.T.); +#174111 = VERTEX_POINT('',#174112); +#174112 = CARTESIAN_POINT('',(141.678272,-97.831062,1.585)); +#174113 = LINE('',#174114,#174115); +#174114 = CARTESIAN_POINT('',(141.679494,-97.653763,1.585)); +#174115 = VECTOR('',#174116,1.); +#174116 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#174117 = ORIENTED_EDGE('',*,*,#174118,.T.); +#174118 = EDGE_CURVE('',#174111,#174119,#174121,.T.); +#174119 = VERTEX_POINT('',#174120); +#174120 = CARTESIAN_POINT('',(141.430091,-98.075287,1.585)); +#174121 = CIRCLE('',#174122,0.348632345849); +#174122 = AXIS2_PLACEMENT_3D('',#174123,#174124,#174125); +#174123 = CARTESIAN_POINT('',(141.34232219403,-97.7378834593,1.585)); +#174124 = DIRECTION('',(0.,0.,-1.)); +#174125 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#174126 = ORIENTED_EDGE('',*,*,#174127,.T.); +#174127 = EDGE_CURVE('',#174119,#174128,#174130,.T.); +#174128 = VERTEX_POINT('',#174129); +#174129 = CARTESIAN_POINT('',(141.109507,-98.076728,1.585)); +#174130 = LINE('',#174131,#174132); +#174131 = CARTESIAN_POINT('',(141.430091,-98.075287,1.585)); +#174132 = VECTOR('',#174133,1.); +#174133 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#174134 = ORIENTED_EDGE('',*,*,#174135,.T.); +#174135 = EDGE_CURVE('',#174128,#174136,#174138,.T.); +#174136 = VERTEX_POINT('',#174137); +#174137 = CARTESIAN_POINT('',(141.108066,-98.492551,1.585)); +#174138 = LINE('',#174139,#174140); +#174139 = CARTESIAN_POINT('',(141.109507,-98.076728,1.585)); +#174140 = VECTOR('',#174141,1.); +#174141 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#174142 = ORIENTED_EDGE('',*,*,#174143,.T.); +#174143 = EDGE_CURVE('',#174136,#174144,#174146,.T.); +#174144 = VERTEX_POINT('',#174145); +#174145 = CARTESIAN_POINT('',(140.959507,-98.477919,1.585)); +#174146 = CIRCLE('',#174147,7.500006711463E-02); +#174147 = AXIS2_PLACEMENT_3D('',#174148,#174149,#174150); +#174148 = CARTESIAN_POINT('',(141.03450706711,-98.47791906711,1.585)); +#174149 = DIRECTION('',(-0.,0.,-1.)); +#174150 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#174151 = ORIENTED_EDGE('',*,*,#174152,.T.); +#174152 = EDGE_CURVE('',#174144,#174083,#174153,.T.); +#174153 = LINE('',#174154,#174155); +#174154 = CARTESIAN_POINT('',(140.959507,-98.477919,1.585)); +#174155 = VECTOR('',#174156,1.); +#174156 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#174157 = FACE_BOUND('',#174158,.F.); +#174158 = EDGE_LOOP('',(#174159,#174170,#174178,#174186,#174194,#174203) + ); +#174159 = ORIENTED_EDGE('',*,*,#174160,.T.); +#174160 = EDGE_CURVE('',#174161,#174163,#174165,.T.); +#174161 = VERTEX_POINT('',#174162); +#174162 = CARTESIAN_POINT('',(141.530935,-97.6861,1.585)); +#174163 = VERTEX_POINT('',#174164); +#174164 = CARTESIAN_POINT('',(141.397754,-97.552919,1.585)); +#174165 = CIRCLE('',#174166,0.18686440374); +#174166 = AXIS2_PLACEMENT_3D('',#174167,#174168,#174169); +#174167 = CARTESIAN_POINT('',(141.350218,-97.733636,1.585)); +#174168 = DIRECTION('',(0.,0.,1.)); +#174169 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#174170 = ORIENTED_EDGE('',*,*,#174171,.T.); +#174171 = EDGE_CURVE('',#174163,#174172,#174174,.T.); +#174172 = VERTEX_POINT('',#174173); +#174173 = CARTESIAN_POINT('',(141.109507,-97.552919,1.585)); +#174174 = LINE('',#174175,#174176); +#174175 = CARTESIAN_POINT('',(141.397754,-97.552919,1.585)); +#174176 = VECTOR('',#174177,1.); +#174177 = DIRECTION('',(-1.,0.,0.)); +#174178 = ORIENTED_EDGE('',*,*,#174179,.T.); +#174179 = EDGE_CURVE('',#174172,#174180,#174182,.T.); +#174180 = VERTEX_POINT('',#174181); +#174181 = CARTESIAN_POINT('',(141.109507,-97.926728,1.585)); +#174182 = LINE('',#174183,#174184); +#174183 = CARTESIAN_POINT('',(141.109507,-97.552919,1.585)); +#174184 = VECTOR('',#174185,1.); +#174185 = DIRECTION('',(0.,-1.,0.)); +#174186 = ORIENTED_EDGE('',*,*,#174187,.T.); +#174187 = EDGE_CURVE('',#174180,#174188,#174190,.T.); +#174188 = VERTEX_POINT('',#174189); +#174189 = CARTESIAN_POINT('',(141.397754,-97.926728,1.585)); +#174190 = LINE('',#174191,#174192); +#174191 = CARTESIAN_POINT('',(141.109507,-97.926728,1.585)); +#174192 = VECTOR('',#174193,1.); +#174193 = DIRECTION('',(1.,0.,0.)); +#174194 = ORIENTED_EDGE('',*,*,#174195,.T.); +#174195 = EDGE_CURVE('',#174188,#174196,#174198,.T.); +#174196 = VERTEX_POINT('',#174197); +#174197 = CARTESIAN_POINT('',(141.530935,-97.793547,1.585)); +#174198 = CIRCLE('',#174199,0.18686440374); +#174199 = AXIS2_PLACEMENT_3D('',#174200,#174201,#174202); +#174200 = CARTESIAN_POINT('',(141.350218,-97.746011,1.585)); +#174201 = DIRECTION('',(0.,0.,1.)); +#174202 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#174203 = ORIENTED_EDGE('',*,*,#174204,.T.); +#174204 = EDGE_CURVE('',#174196,#174161,#174205,.T.); +#174205 = LINE('',#174206,#174207); +#174206 = CARTESIAN_POINT('',(141.530935,-97.793547,1.585)); +#174207 = VECTOR('',#174208,1.); +#174208 = DIRECTION('',(0.,1.,0.)); +#174209 = PLANE('',#174210); +#174210 = AXIS2_PLACEMENT_3D('',#174211,#174212,#174213); +#174211 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174212 = DIRECTION('',(0.,0.,1.)); +#174213 = DIRECTION('',(1.,0.,-0.)); +#174214 = SHELL_BASED_SURFACE_MODEL('',(#174215)); +#174215 = OPEN_SHELL('',(#174216)); +#174216 = ADVANCED_FACE('',(#174217),#174352,.T.); +#174217 = FACE_BOUND('',#174218,.F.); +#174218 = EDGE_LOOP('',(#174219,#174230,#174238,#174246,#174254,#174263, + #174271,#174279,#174288,#174296,#174304,#174313,#174321,#174329, + #174338,#174346)); +#174219 = ORIENTED_EDGE('',*,*,#174220,.T.); +#174220 = EDGE_CURVE('',#174221,#174223,#174225,.T.); +#174221 = VERTEX_POINT('',#174222); +#174222 = CARTESIAN_POINT('',(142.179,-97.371051,1.585)); +#174223 = VERTEX_POINT('',#174224); +#174224 = CARTESIAN_POINT('',(142.296134,-97.454018,1.585)); +#174225 = CIRCLE('',#174226,7.499955990672E-02); +#174226 = AXIS2_PLACEMENT_3D('',#174227,#174228,#174229); +#174227 = CARTESIAN_POINT('',(142.22498350095,-97.43030006435,1.585)); +#174228 = DIRECTION('',(0.,0.,-1.)); +#174229 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#174230 = ORIENTED_EDGE('',*,*,#174231,.T.); +#174231 = EDGE_CURVE('',#174223,#174232,#174234,.T.); +#174232 = VERTEX_POINT('',#174233); +#174233 = CARTESIAN_POINT('',(142.090945,-98.069585,1.585)); +#174234 = LINE('',#174235,#174236); +#174235 = CARTESIAN_POINT('',(142.296134,-97.454018,1.585)); +#174236 = VECTOR('',#174237,1.); +#174237 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#174238 = ORIENTED_EDGE('',*,*,#174239,.T.); +#174239 = EDGE_CURVE('',#174232,#174240,#174242,.T.); +#174240 = VERTEX_POINT('',#174241); +#174241 = CARTESIAN_POINT('',(142.388078,-98.069585,1.585)); +#174242 = LINE('',#174243,#174244); +#174243 = CARTESIAN_POINT('',(142.090945,-98.069585,1.585)); +#174244 = VECTOR('',#174245,1.); +#174245 = DIRECTION('',(1.,0.,0.)); +#174246 = ORIENTED_EDGE('',*,*,#174247,.T.); +#174247 = EDGE_CURVE('',#174240,#174248,#174250,.T.); +#174248 = VERTEX_POINT('',#174249); +#174249 = CARTESIAN_POINT('',(142.389519,-97.79662,1.585)); +#174250 = LINE('',#174251,#174252); +#174251 = CARTESIAN_POINT('',(142.388078,-98.069585,1.585)); +#174252 = VECTOR('',#174253,1.); +#174253 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#174254 = ORIENTED_EDGE('',*,*,#174255,.T.); +#174255 = EDGE_CURVE('',#174248,#174256,#174258,.T.); +#174256 = VERTEX_POINT('',#174257); +#174257 = CARTESIAN_POINT('',(142.538078,-97.811252,1.585)); +#174258 = CIRCLE('',#174259,7.500006711465E-02); +#174259 = AXIS2_PLACEMENT_3D('',#174260,#174261,#174262); +#174260 = CARTESIAN_POINT('',(142.46307793288,-97.81125193288,1.585)); +#174261 = DIRECTION('',(0.,0.,-1.)); +#174262 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#174263 = ORIENTED_EDGE('',*,*,#174264,.T.); +#174264 = EDGE_CURVE('',#174256,#174265,#174267,.T.); +#174265 = VERTEX_POINT('',#174266); +#174266 = CARTESIAN_POINT('',(142.538078,-98.069585,1.585)); +#174267 = LINE('',#174268,#174269); +#174268 = CARTESIAN_POINT('',(142.538078,-97.811252,1.585)); +#174269 = VECTOR('',#174270,1.); +#174270 = DIRECTION('',(0.,-1.,0.)); +#174271 = ORIENTED_EDGE('',*,*,#174272,.T.); +#174272 = EDGE_CURVE('',#174265,#174273,#174275,.T.); +#174273 = VERTEX_POINT('',#174274); +#174274 = CARTESIAN_POINT('',(142.620567,-98.071026,1.585)); +#174275 = LINE('',#174276,#174277); +#174276 = CARTESIAN_POINT('',(142.538078,-98.069585,1.585)); +#174277 = VECTOR('',#174278,1.); +#174278 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#174279 = ORIENTED_EDGE('',*,*,#174280,.T.); +#174280 = EDGE_CURVE('',#174273,#174281,#174283,.T.); +#174281 = VERTEX_POINT('',#174282); +#174282 = CARTESIAN_POINT('',(142.605935,-98.219585,1.585)); +#174283 = CIRCLE('',#174284,7.500006711462E-02); +#174284 = AXIS2_PLACEMENT_3D('',#174285,#174286,#174287); +#174285 = CARTESIAN_POINT('',(142.60593506711,-98.14458493288,1.585)); +#174286 = DIRECTION('',(0.,0.,-1.)); +#174287 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#174288 = ORIENTED_EDGE('',*,*,#174289,.T.); +#174289 = EDGE_CURVE('',#174281,#174290,#174292,.T.); +#174290 = VERTEX_POINT('',#174291); +#174291 = CARTESIAN_POINT('',(142.538078,-98.219585,1.585)); +#174292 = LINE('',#174293,#174294); +#174293 = CARTESIAN_POINT('',(142.605935,-98.219585,1.585)); +#174294 = VECTOR('',#174295,1.); +#174295 = DIRECTION('',(-1.,0.,0.)); +#174296 = ORIENTED_EDGE('',*,*,#174297,.T.); +#174297 = EDGE_CURVE('',#174290,#174298,#174300,.T.); +#174298 = VERTEX_POINT('',#174299); +#174299 = CARTESIAN_POINT('',(142.536637,-98.492551,1.585)); +#174300 = LINE('',#174301,#174302); +#174301 = CARTESIAN_POINT('',(142.538078,-98.219585,1.585)); +#174302 = VECTOR('',#174303,1.); +#174303 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#174304 = ORIENTED_EDGE('',*,*,#174305,.T.); +#174305 = EDGE_CURVE('',#174298,#174306,#174308,.T.); +#174306 = VERTEX_POINT('',#174307); +#174307 = CARTESIAN_POINT('',(142.388078,-98.477919,1.585)); +#174308 = CIRCLE('',#174309,7.500006711464E-02); +#174309 = AXIS2_PLACEMENT_3D('',#174310,#174311,#174312); +#174310 = CARTESIAN_POINT('',(142.46307806711,-98.47791906711,1.585)); +#174311 = DIRECTION('',(-0.,0.,-1.)); +#174312 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#174313 = ORIENTED_EDGE('',*,*,#174314,.T.); +#174314 = EDGE_CURVE('',#174306,#174315,#174317,.T.); +#174315 = VERTEX_POINT('',#174316); +#174316 = CARTESIAN_POINT('',(142.388078,-98.219585,1.585)); +#174317 = LINE('',#174318,#174319); +#174318 = CARTESIAN_POINT('',(142.388078,-98.477919,1.585)); +#174319 = VECTOR('',#174320,1.); +#174320 = DIRECTION('',(0.,1.,0.)); +#174321 = ORIENTED_EDGE('',*,*,#174322,.T.); +#174322 = EDGE_CURVE('',#174315,#174323,#174325,.T.); +#174323 = VERTEX_POINT('',#174324); +#174324 = CARTESIAN_POINT('',(141.972256,-98.218144,1.585)); +#174325 = LINE('',#174326,#174327); +#174326 = CARTESIAN_POINT('',(142.388078,-98.219585,1.585)); +#174327 = VECTOR('',#174328,1.); +#174328 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#174329 = ORIENTED_EDGE('',*,*,#174330,.T.); +#174330 = EDGE_CURVE('',#174323,#174331,#174333,.T.); +#174331 = VERTEX_POINT('',#174332); +#174332 = CARTESIAN_POINT('',(141.915737,-98.120868,1.585)); +#174333 = CIRCLE('',#174334,7.499997045039E-02); +#174334 = AXIS2_PLACEMENT_3D('',#174335,#174336,#174337); +#174335 = CARTESIAN_POINT('',(141.98688817257,-98.14458521335,1.585)); +#174336 = DIRECTION('',(0.,0.,-1.)); +#174337 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#174338 = ORIENTED_EDGE('',*,*,#174339,.T.); +#174339 = EDGE_CURVE('',#174331,#174340,#174342,.T.); +#174340 = VERTEX_POINT('',#174341); +#174341 = CARTESIAN_POINT('',(142.159826,-97.393158,1.585)); +#174342 = LINE('',#174343,#174344); +#174343 = CARTESIAN_POINT('',(141.915737,-98.120868,1.585)); +#174344 = VECTOR('',#174345,1.); +#174345 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#174346 = ORIENTED_EDGE('',*,*,#174347,.T.); +#174347 = EDGE_CURVE('',#174340,#174221,#174348,.T.); +#174348 = LINE('',#174349,#174350); +#174349 = CARTESIAN_POINT('',(142.159826,-97.393158,1.585)); +#174350 = VECTOR('',#174351,1.); +#174351 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#174352 = PLANE('',#174353); +#174353 = AXIS2_PLACEMENT_3D('',#174354,#174355,#174356); +#174354 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174355 = DIRECTION('',(0.,0.,1.)); +#174356 = DIRECTION('',(1.,0.,-0.)); +#174357 = SHELL_BASED_SURFACE_MODEL('',(#174358)); +#174358 = OPEN_SHELL('',(#174359)); +#174359 = ADVANCED_FACE('',(#174360),#174429,.T.); +#174360 = FACE_BOUND('',#174361,.F.); +#174361 = EDGE_LOOP('',(#174362,#174373,#174381,#174389,#174398,#174406, + #174415,#174423)); +#174362 = ORIENTED_EDGE('',*,*,#174363,.T.); +#174363 = EDGE_CURVE('',#174364,#174366,#174368,.T.); +#174364 = VERTEX_POINT('',#174365); +#174365 = CARTESIAN_POINT('',(207.386217,-96.900139,1.585)); +#174366 = VERTEX_POINT('',#174367); +#174367 = CARTESIAN_POINT('',(207.50165,-96.9231,1.585)); +#174368 = CIRCLE('',#174369,6.000007318649E-02); +#174369 = AXIS2_PLACEMENT_3D('',#174370,#174371,#174372); +#174370 = CARTESIAN_POINT('',(207.44164992681,-96.92309982331,1.585)); +#174371 = DIRECTION('',(0.,0.,-1.)); +#174372 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#174373 = ORIENTED_EDGE('',*,*,#174374,.T.); +#174374 = EDGE_CURVE('',#174366,#174375,#174377,.T.); +#174375 = VERTEX_POINT('',#174376); +#174376 = CARTESIAN_POINT('',(207.50165,-98.1131,1.585)); +#174377 = LINE('',#174378,#174379); +#174378 = CARTESIAN_POINT('',(207.50165,-96.9231,1.585)); +#174379 = VECTOR('',#174380,1.); +#174380 = DIRECTION('',(0.,-1.,0.)); +#174381 = ORIENTED_EDGE('',*,*,#174382,.T.); +#174382 = EDGE_CURVE('',#174375,#174383,#174385,.T.); +#174383 = VERTEX_POINT('',#174384); +#174384 = CARTESIAN_POINT('',(208.69165,-98.1131,1.585)); +#174385 = LINE('',#174386,#174387); +#174386 = CARTESIAN_POINT('',(207.50165,-98.1131,1.585)); +#174387 = VECTOR('',#174388,1.); +#174388 = DIRECTION('',(1.,0.,0.)); +#174389 = ORIENTED_EDGE('',*,*,#174390,.T.); +#174390 = EDGE_CURVE('',#174383,#174391,#174393,.T.); +#174391 = VERTEX_POINT('',#174392); +#174392 = CARTESIAN_POINT('',(208.69165,-98.2331,1.585)); +#174393 = CIRCLE('',#174394,6.000000000042E-02); +#174394 = AXIS2_PLACEMENT_3D('',#174395,#174396,#174397); +#174395 = CARTESIAN_POINT('',(208.69165022558,-98.1731,1.585)); +#174396 = DIRECTION('',(0.,0.,-1.)); +#174397 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#174398 = ORIENTED_EDGE('',*,*,#174399,.T.); +#174399 = EDGE_CURVE('',#174391,#174400,#174402,.T.); +#174400 = VERTEX_POINT('',#174401); +#174401 = CARTESIAN_POINT('',(207.44165,-98.2331,1.585)); +#174402 = LINE('',#174403,#174404); +#174403 = CARTESIAN_POINT('',(208.69165,-98.2331,1.585)); +#174404 = VECTOR('',#174405,1.); +#174405 = DIRECTION('',(-1.,0.,0.)); +#174406 = ORIENTED_EDGE('',*,*,#174407,.T.); +#174407 = EDGE_CURVE('',#174400,#174408,#174410,.T.); +#174408 = VERTEX_POINT('',#174409); +#174409 = CARTESIAN_POINT('',(207.38165,-98.1731,1.585)); +#174410 = CIRCLE('',#174411,5.999932016257E-02); +#174411 = AXIS2_PLACEMENT_3D('',#174412,#174413,#174414); +#174412 = CARTESIAN_POINT('',(207.44164932015,-98.17310067984,1.585)); +#174413 = DIRECTION('',(0.,0.,-1.)); +#174414 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#174415 = ORIENTED_EDGE('',*,*,#174416,.T.); +#174416 = EDGE_CURVE('',#174408,#174417,#174419,.T.); +#174417 = VERTEX_POINT('',#174418); +#174418 = CARTESIAN_POINT('',(207.38165,-96.9231,1.585)); +#174419 = LINE('',#174420,#174421); +#174420 = CARTESIAN_POINT('',(207.38165,-98.1731,1.585)); +#174421 = VECTOR('',#174422,1.); +#174422 = DIRECTION('',(0.,1.,0.)); +#174423 = ORIENTED_EDGE('',*,*,#174424,.T.); +#174424 = EDGE_CURVE('',#174417,#174364,#174425,.T.); +#174425 = LINE('',#174426,#174427); +#174426 = CARTESIAN_POINT('',(207.38165,-96.9231,1.585)); +#174427 = VECTOR('',#174428,1.); +#174428 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#174429 = PLANE('',#174430); +#174430 = AXIS2_PLACEMENT_3D('',#174431,#174432,#174433); +#174431 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174432 = DIRECTION('',(0.,0.,1.)); +#174433 = DIRECTION('',(1.,0.,-0.)); +#174434 = SHELL_BASED_SURFACE_MODEL('',(#174435)); +#174435 = OPEN_SHELL('',(#174436)); +#174436 = ADVANCED_FACE('',(#174437),#174531,.T.); +#174437 = FACE_BOUND('',#174438,.F.); +#174438 = EDGE_LOOP('',(#174439,#174450,#174458,#174467,#174475,#174484, + #174492,#174501,#174509,#174517,#174525)); +#174439 = ORIENTED_EDGE('',*,*,#174440,.T.); +#174440 = EDGE_CURVE('',#174441,#174443,#174445,.T.); +#174441 = VERTEX_POINT('',#174442); +#174442 = CARTESIAN_POINT('',(106.896217,-96.860139,1.585)); +#174443 = VERTEX_POINT('',#174444); +#174444 = CARTESIAN_POINT('',(107.01165,-96.8831,1.585)); +#174445 = CIRCLE('',#174446,6.000007318648E-02); +#174446 = AXIS2_PLACEMENT_3D('',#174447,#174448,#174449); +#174447 = CARTESIAN_POINT('',(106.95164992681,-96.88309982331,1.585)); +#174448 = DIRECTION('',(0.,0.,-1.)); +#174449 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#174450 = ORIENTED_EDGE('',*,*,#174451,.T.); +#174451 = EDGE_CURVE('',#174443,#174452,#174454,.T.); +#174452 = VERTEX_POINT('',#174453); +#174453 = CARTESIAN_POINT('',(107.01165,-97.8831,1.585)); +#174454 = LINE('',#174455,#174456); +#174455 = CARTESIAN_POINT('',(107.01165,-96.8831,1.585)); +#174456 = VECTOR('',#174457,1.); +#174457 = DIRECTION('',(0.,-1.,0.)); +#174458 = ORIENTED_EDGE('',*,*,#174459,.T.); +#174459 = EDGE_CURVE('',#174452,#174460,#174462,.T.); +#174460 = VERTEX_POINT('',#174461); +#174461 = CARTESIAN_POINT('',(106.95165,-97.9431,1.585)); +#174462 = CIRCLE('',#174463,5.999932016264E-02); +#174463 = AXIS2_PLACEMENT_3D('',#174464,#174465,#174466); +#174464 = CARTESIAN_POINT('',(106.95165067984,-97.88310067984,1.585)); +#174465 = DIRECTION('',(0.,0.,-1.)); +#174466 = DIRECTION('',(0.999999999936,1.133081517402E-05,0.)); +#174467 = ORIENTED_EDGE('',*,*,#174468,.T.); +#174468 = EDGE_CURVE('',#174460,#174469,#174471,.T.); +#174469 = VERTEX_POINT('',#174470); +#174470 = CARTESIAN_POINT('',(105.43165,-97.9431,1.585)); +#174471 = LINE('',#174472,#174473); +#174472 = CARTESIAN_POINT('',(106.95165,-97.9431,1.585)); +#174473 = VECTOR('',#174474,1.); +#174474 = DIRECTION('',(-1.,0.,0.)); +#174475 = ORIENTED_EDGE('',*,*,#174476,.T.); +#174476 = EDGE_CURVE('',#174469,#174477,#174479,.T.); +#174477 = VERTEX_POINT('',#174478); +#174478 = CARTESIAN_POINT('',(105.37165,-97.8831,1.585)); +#174479 = CIRCLE('',#174480,5.999932016257E-02); +#174480 = AXIS2_PLACEMENT_3D('',#174481,#174482,#174483); +#174481 = CARTESIAN_POINT('',(105.43164932015,-97.88310067984,1.585)); +#174482 = DIRECTION('',(0.,0.,-1.)); +#174483 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#174484 = ORIENTED_EDGE('',*,*,#174485,.T.); +#174485 = EDGE_CURVE('',#174477,#174486,#174488,.T.); +#174486 = VERTEX_POINT('',#174487); +#174487 = CARTESIAN_POINT('',(105.37165,-97.8331,1.585)); +#174488 = LINE('',#174489,#174490); +#174489 = CARTESIAN_POINT('',(105.37165,-97.8831,1.585)); +#174490 = VECTOR('',#174491,1.); +#174491 = DIRECTION('',(0.,1.,0.)); +#174492 = ORIENTED_EDGE('',*,*,#174493,.T.); +#174493 = EDGE_CURVE('',#174486,#174494,#174496,.T.); +#174494 = VERTEX_POINT('',#174495); +#174495 = CARTESIAN_POINT('',(105.487083,-97.810139,1.585)); +#174496 = CIRCLE('',#174497,6.000007318647E-02); +#174497 = AXIS2_PLACEMENT_3D('',#174498,#174499,#174500); +#174498 = CARTESIAN_POINT('',(105.43165007318,-97.83309982331,1.585)); +#174499 = DIRECTION('',(0.,0.,-1.)); +#174500 = DIRECTION('',(-0.999999999996,-2.944769485282E-06,-0.)); +#174501 = ORIENTED_EDGE('',*,*,#174502,.T.); +#174502 = EDGE_CURVE('',#174494,#174503,#174505,.T.); +#174503 = VERTEX_POINT('',#174504); +#174504 = CARTESIAN_POINT('',(105.489661,-97.8231,1.585)); +#174505 = LINE('',#174506,#174507); +#174506 = CARTESIAN_POINT('',(105.487083,-97.810139,1.585)); +#174507 = VECTOR('',#174508,1.); +#174508 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#174509 = ORIENTED_EDGE('',*,*,#174510,.T.); +#174510 = EDGE_CURVE('',#174503,#174511,#174513,.T.); +#174511 = VERTEX_POINT('',#174512); +#174512 = CARTESIAN_POINT('',(106.89165,-97.8231,1.585)); +#174513 = LINE('',#174514,#174515); +#174514 = CARTESIAN_POINT('',(105.489661,-97.8231,1.585)); +#174515 = VECTOR('',#174516,1.); +#174516 = DIRECTION('',(1.,0.,0.)); +#174517 = ORIENTED_EDGE('',*,*,#174518,.T.); +#174518 = EDGE_CURVE('',#174511,#174519,#174521,.T.); +#174519 = VERTEX_POINT('',#174520); +#174520 = CARTESIAN_POINT('',(106.89165,-96.8831,1.585)); +#174521 = LINE('',#174522,#174523); +#174522 = CARTESIAN_POINT('',(106.89165,-97.8231,1.585)); +#174523 = VECTOR('',#174524,1.); +#174524 = DIRECTION('',(0.,1.,0.)); +#174525 = ORIENTED_EDGE('',*,*,#174526,.T.); +#174526 = EDGE_CURVE('',#174519,#174441,#174527,.T.); +#174527 = LINE('',#174528,#174529); +#174528 = CARTESIAN_POINT('',(106.89165,-96.8831,1.585)); +#174529 = VECTOR('',#174530,1.); +#174530 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#174531 = PLANE('',#174532); +#174532 = AXIS2_PLACEMENT_3D('',#174533,#174534,#174535); +#174533 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174534 = DIRECTION('',(0.,0.,1.)); +#174535 = DIRECTION('',(1.,0.,-0.)); +#174536 = SHELL_BASED_SURFACE_MODEL('',(#174537)); +#174537 = OPEN_SHELL('',(#174538)); +#174538 = ADVANCED_FACE('',(#174539,#174609,#174793,#174877,#174911, + #174945),#174979,.T.); +#174539 = FACE_BOUND('',#174540,.F.); +#174540 = EDGE_LOOP('',(#174541,#174552,#174560,#174569,#174577,#174586, + #174594,#174603)); +#174541 = ORIENTED_EDGE('',*,*,#174542,.T.); +#174542 = EDGE_CURVE('',#174543,#174545,#174547,.T.); +#174543 = VERTEX_POINT('',#174544); +#174544 = CARTESIAN_POINT('',(207.67165,-85.2631,1.585)); +#174545 = VERTEX_POINT('',#174546); +#174546 = CARTESIAN_POINT('',(207.73165,-85.2031,1.585)); +#174547 = CIRCLE('',#174548,5.999932016262E-02); +#174548 = AXIS2_PLACEMENT_3D('',#174549,#174550,#174551); +#174549 = CARTESIAN_POINT('',(207.73164932015,-85.26309932015,1.585)); +#174550 = DIRECTION('',(0.,0.,-1.)); +#174551 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#174552 = ORIENTED_EDGE('',*,*,#174553,.T.); +#174553 = EDGE_CURVE('',#174545,#174554,#174556,.T.); +#174554 = VERTEX_POINT('',#174555); +#174555 = CARTESIAN_POINT('',(213.70165,-85.2031,1.585)); +#174556 = LINE('',#174557,#174558); +#174557 = CARTESIAN_POINT('',(207.73165,-85.2031,1.585)); +#174558 = VECTOR('',#174559,1.); +#174559 = DIRECTION('',(1.,0.,0.)); +#174560 = ORIENTED_EDGE('',*,*,#174561,.T.); +#174561 = EDGE_CURVE('',#174554,#174562,#174564,.T.); +#174562 = VERTEX_POINT('',#174563); +#174563 = CARTESIAN_POINT('',(213.76165,-85.2631,1.585)); +#174564 = CIRCLE('',#174565,5.999932016257E-02); +#174565 = AXIS2_PLACEMENT_3D('',#174566,#174567,#174568); +#174566 = CARTESIAN_POINT('',(213.70165067984,-85.26309932015,1.585)); +#174567 = DIRECTION('',(0.,0.,-1.)); +#174568 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#174569 = ORIENTED_EDGE('',*,*,#174570,.T.); +#174570 = EDGE_CURVE('',#174562,#174571,#174573,.T.); +#174571 = VERTEX_POINT('',#174572); +#174572 = CARTESIAN_POINT('',(213.76165,-97.8831,1.585)); +#174573 = LINE('',#174574,#174575); +#174574 = CARTESIAN_POINT('',(213.76165,-85.2631,1.585)); +#174575 = VECTOR('',#174576,1.); +#174576 = DIRECTION('',(0.,-1.,0.)); +#174577 = ORIENTED_EDGE('',*,*,#174578,.T.); +#174578 = EDGE_CURVE('',#174571,#174579,#174581,.T.); +#174579 = VERTEX_POINT('',#174580); +#174580 = CARTESIAN_POINT('',(213.70165,-97.9431,1.585)); +#174581 = CIRCLE('',#174582,5.999932016265E-02); +#174582 = AXIS2_PLACEMENT_3D('',#174583,#174584,#174585); +#174583 = CARTESIAN_POINT('',(213.70165067984,-97.88310067984,1.585)); +#174584 = DIRECTION('',(0.,0.,-1.)); +#174585 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#174586 = ORIENTED_EDGE('',*,*,#174587,.T.); +#174587 = EDGE_CURVE('',#174579,#174588,#174590,.T.); +#174588 = VERTEX_POINT('',#174589); +#174589 = CARTESIAN_POINT('',(207.73165,-97.9431,1.585)); +#174590 = LINE('',#174591,#174592); +#174591 = CARTESIAN_POINT('',(213.70165,-97.9431,1.585)); +#174592 = VECTOR('',#174593,1.); +#174593 = DIRECTION('',(-1.,0.,0.)); +#174594 = ORIENTED_EDGE('',*,*,#174595,.T.); +#174595 = EDGE_CURVE('',#174588,#174596,#174598,.T.); +#174596 = VERTEX_POINT('',#174597); +#174597 = CARTESIAN_POINT('',(207.67165,-97.8831,1.585)); +#174598 = CIRCLE('',#174599,5.999932016256E-02); +#174599 = AXIS2_PLACEMENT_3D('',#174600,#174601,#174602); +#174600 = CARTESIAN_POINT('',(207.73164932015,-97.88310067984,1.585)); +#174601 = DIRECTION('',(0.,0.,-1.)); +#174602 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#174603 = ORIENTED_EDGE('',*,*,#174604,.T.); +#174604 = EDGE_CURVE('',#174596,#174543,#174605,.T.); +#174605 = LINE('',#174606,#174607); +#174606 = CARTESIAN_POINT('',(207.67165,-97.8831,1.585)); +#174607 = VECTOR('',#174608,1.); +#174608 = DIRECTION('',(0.,1.,0.)); +#174609 = FACE_BOUND('',#174610,.F.); +#174610 = EDGE_LOOP('',(#174611,#174622,#174630,#174638,#174646,#174655, + #174663,#174671,#174679,#174688,#174696,#174705,#174713,#174721, + #174729,#174738,#174746,#174754,#174762,#174771,#174779,#174787)); +#174611 = ORIENTED_EDGE('',*,*,#174612,.T.); +#174612 = EDGE_CURVE('',#174613,#174615,#174617,.T.); +#174613 = VERTEX_POINT('',#174614); +#174614 = CARTESIAN_POINT('',(209.99165,-86.0831,1.585)); +#174615 = VERTEX_POINT('',#174616); +#174616 = CARTESIAN_POINT('',(209.93165,-86.0231,1.585)); +#174617 = CIRCLE('',#174618,5.999932016264E-02); +#174618 = AXIS2_PLACEMENT_3D('',#174619,#174620,#174621); +#174619 = CARTESIAN_POINT('',(209.99164932015,-86.02310067984,1.585)); +#174620 = DIRECTION('',(0.,0.,-1.)); +#174621 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#174622 = ORIENTED_EDGE('',*,*,#174623,.T.); +#174623 = EDGE_CURVE('',#174615,#174624,#174626,.T.); +#174624 = VERTEX_POINT('',#174625); +#174625 = CARTESIAN_POINT('',(209.93165,-85.3231,1.585)); +#174626 = LINE('',#174627,#174628); +#174627 = CARTESIAN_POINT('',(209.93165,-86.0231,1.585)); +#174628 = VECTOR('',#174629,1.); +#174629 = DIRECTION('',(0.,1.,0.)); +#174630 = ORIENTED_EDGE('',*,*,#174631,.T.); +#174631 = EDGE_CURVE('',#174624,#174632,#174634,.T.); +#174632 = VERTEX_POINT('',#174633); +#174633 = CARTESIAN_POINT('',(208.55165,-85.3231,1.585)); +#174634 = LINE('',#174635,#174636); +#174635 = CARTESIAN_POINT('',(209.93165,-85.3231,1.585)); +#174636 = VECTOR('',#174637,1.); +#174637 = DIRECTION('',(-1.,0.,0.)); +#174638 = ORIENTED_EDGE('',*,*,#174639,.T.); +#174639 = EDGE_CURVE('',#174632,#174640,#174642,.T.); +#174640 = VERTEX_POINT('',#174641); +#174641 = CARTESIAN_POINT('',(208.55165,-87.0731,1.585)); +#174642 = LINE('',#174643,#174644); +#174643 = CARTESIAN_POINT('',(208.55165,-85.3231,1.585)); +#174644 = VECTOR('',#174645,1.); +#174645 = DIRECTION('',(0.,-1.,0.)); +#174646 = ORIENTED_EDGE('',*,*,#174647,.T.); +#174647 = EDGE_CURVE('',#174640,#174648,#174650,.T.); +#174648 = VERTEX_POINT('',#174649); +#174649 = CARTESIAN_POINT('',(208.49165,-87.1331,1.585)); +#174650 = CIRCLE('',#174651,5.999932016262E-02); +#174651 = AXIS2_PLACEMENT_3D('',#174652,#174653,#174654); +#174652 = CARTESIAN_POINT('',(208.49165067984,-87.07310067984,1.585)); +#174653 = DIRECTION('',(0.,0.,-1.)); +#174654 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#174655 = ORIENTED_EDGE('',*,*,#174656,.T.); +#174656 = EDGE_CURVE('',#174648,#174657,#174659,.T.); +#174657 = VERTEX_POINT('',#174658); +#174658 = CARTESIAN_POINT('',(207.79165,-87.1331,1.585)); +#174659 = LINE('',#174660,#174661); +#174660 = CARTESIAN_POINT('',(208.49165,-87.1331,1.585)); +#174661 = VECTOR('',#174662,1.); +#174662 = DIRECTION('',(-1.,0.,0.)); +#174663 = ORIENTED_EDGE('',*,*,#174664,.T.); +#174664 = EDGE_CURVE('',#174657,#174665,#174667,.T.); +#174665 = VERTEX_POINT('',#174666); +#174666 = CARTESIAN_POINT('',(207.79165,-88.5131,1.585)); +#174667 = LINE('',#174668,#174669); +#174668 = CARTESIAN_POINT('',(207.79165,-87.1331,1.585)); +#174669 = VECTOR('',#174670,1.); +#174670 = DIRECTION('',(0.,-1.,0.)); +#174671 = ORIENTED_EDGE('',*,*,#174672,.T.); +#174672 = EDGE_CURVE('',#174665,#174673,#174675,.T.); +#174673 = VERTEX_POINT('',#174674); +#174674 = CARTESIAN_POINT('',(208.49165,-88.5131,1.585)); +#174675 = LINE('',#174676,#174677); +#174676 = CARTESIAN_POINT('',(207.79165,-88.5131,1.585)); +#174677 = VECTOR('',#174678,1.); +#174678 = DIRECTION('',(1.,0.,0.)); +#174679 = ORIENTED_EDGE('',*,*,#174680,.T.); +#174680 = EDGE_CURVE('',#174673,#174681,#174683,.T.); +#174681 = VERTEX_POINT('',#174682); +#174682 = CARTESIAN_POINT('',(208.55165,-88.5731,1.585)); +#174683 = CIRCLE('',#174684,5.999932016262E-02); +#174684 = AXIS2_PLACEMENT_3D('',#174685,#174686,#174687); +#174685 = CARTESIAN_POINT('',(208.49165067984,-88.57309932015,1.585)); +#174686 = DIRECTION('',(0.,0.,-1.)); +#174687 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#174688 = ORIENTED_EDGE('',*,*,#174689,.T.); +#174689 = EDGE_CURVE('',#174681,#174690,#174692,.T.); +#174690 = VERTEX_POINT('',#174691); +#174691 = CARTESIAN_POINT('',(208.55165,-94.5731,1.585)); +#174692 = LINE('',#174693,#174694); +#174693 = CARTESIAN_POINT('',(208.55165,-88.5731,1.585)); +#174694 = VECTOR('',#174695,1.); +#174695 = DIRECTION('',(0.,-1.,0.)); +#174696 = ORIENTED_EDGE('',*,*,#174697,.T.); +#174697 = EDGE_CURVE('',#174690,#174698,#174700,.T.); +#174698 = VERTEX_POINT('',#174699); +#174699 = CARTESIAN_POINT('',(208.49165,-94.6331,1.585)); +#174700 = CIRCLE('',#174701,5.999932016262E-02); +#174701 = AXIS2_PLACEMENT_3D('',#174702,#174703,#174704); +#174702 = CARTESIAN_POINT('',(208.49165067984,-94.57310067984,1.585)); +#174703 = DIRECTION('',(0.,0.,-1.)); +#174704 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#174705 = ORIENTED_EDGE('',*,*,#174706,.T.); +#174706 = EDGE_CURVE('',#174698,#174707,#174709,.T.); +#174707 = VERTEX_POINT('',#174708); +#174708 = CARTESIAN_POINT('',(207.79165,-94.6331,1.585)); +#174709 = LINE('',#174710,#174711); +#174710 = CARTESIAN_POINT('',(208.49165,-94.6331,1.585)); +#174711 = VECTOR('',#174712,1.); +#174712 = DIRECTION('',(-1.,0.,0.)); +#174713 = ORIENTED_EDGE('',*,*,#174714,.T.); +#174714 = EDGE_CURVE('',#174707,#174715,#174717,.T.); +#174715 = VERTEX_POINT('',#174716); +#174716 = CARTESIAN_POINT('',(207.79165,-96.0131,1.585)); +#174717 = LINE('',#174718,#174719); +#174718 = CARTESIAN_POINT('',(207.79165,-94.6331,1.585)); +#174719 = VECTOR('',#174720,1.); +#174720 = DIRECTION('',(0.,-1.,0.)); +#174721 = ORIENTED_EDGE('',*,*,#174722,.T.); +#174722 = EDGE_CURVE('',#174715,#174723,#174725,.T.); +#174723 = VERTEX_POINT('',#174724); +#174724 = CARTESIAN_POINT('',(208.49165,-96.0131,1.585)); +#174725 = LINE('',#174726,#174727); +#174726 = CARTESIAN_POINT('',(207.79165,-96.0131,1.585)); +#174727 = VECTOR('',#174728,1.); +#174728 = DIRECTION('',(1.,0.,0.)); +#174729 = ORIENTED_EDGE('',*,*,#174730,.T.); +#174730 = EDGE_CURVE('',#174723,#174731,#174733,.T.); +#174731 = VERTEX_POINT('',#174732); +#174732 = CARTESIAN_POINT('',(208.55165,-96.0731,1.585)); +#174733 = CIRCLE('',#174734,5.999932016262E-02); +#174734 = AXIS2_PLACEMENT_3D('',#174735,#174736,#174737); +#174735 = CARTESIAN_POINT('',(208.49165067984,-96.07309932015,1.585)); +#174736 = DIRECTION('',(0.,0.,-1.)); +#174737 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#174738 = ORIENTED_EDGE('',*,*,#174739,.T.); +#174739 = EDGE_CURVE('',#174731,#174740,#174742,.T.); +#174740 = VERTEX_POINT('',#174741); +#174741 = CARTESIAN_POINT('',(208.55165,-97.8231,1.585)); +#174742 = LINE('',#174743,#174744); +#174743 = CARTESIAN_POINT('',(208.55165,-96.0731,1.585)); +#174744 = VECTOR('',#174745,1.); +#174745 = DIRECTION('',(0.,-1.,0.)); +#174746 = ORIENTED_EDGE('',*,*,#174747,.T.); +#174747 = EDGE_CURVE('',#174740,#174748,#174750,.T.); +#174748 = VERTEX_POINT('',#174749); +#174749 = CARTESIAN_POINT('',(209.93165,-97.8231,1.585)); +#174750 = LINE('',#174751,#174752); +#174751 = CARTESIAN_POINT('',(208.55165,-97.8231,1.585)); +#174752 = VECTOR('',#174753,1.); +#174753 = DIRECTION('',(1.,0.,0.)); +#174754 = ORIENTED_EDGE('',*,*,#174755,.T.); +#174755 = EDGE_CURVE('',#174748,#174756,#174758,.T.); +#174756 = VERTEX_POINT('',#174757); +#174757 = CARTESIAN_POINT('',(209.93165,-97.1231,1.585)); +#174758 = LINE('',#174759,#174760); +#174759 = CARTESIAN_POINT('',(209.93165,-97.8231,1.585)); +#174760 = VECTOR('',#174761,1.); +#174761 = DIRECTION('',(0.,1.,0.)); +#174762 = ORIENTED_EDGE('',*,*,#174763,.T.); +#174763 = EDGE_CURVE('',#174756,#174764,#174766,.T.); +#174764 = VERTEX_POINT('',#174765); +#174765 = CARTESIAN_POINT('',(209.99165,-97.0631,1.585)); +#174766 = CIRCLE('',#174767,5.999932016261E-02); +#174767 = AXIS2_PLACEMENT_3D('',#174768,#174769,#174770); +#174768 = CARTESIAN_POINT('',(209.99164932015,-97.12309932015,1.585)); +#174769 = DIRECTION('',(0.,0.,-1.)); +#174770 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#174771 = ORIENTED_EDGE('',*,*,#174772,.T.); +#174772 = EDGE_CURVE('',#174764,#174773,#174775,.T.); +#174773 = VERTEX_POINT('',#174774); +#174774 = CARTESIAN_POINT('',(212.88165,-97.0631,1.585)); +#174775 = LINE('',#174776,#174777); +#174776 = CARTESIAN_POINT('',(209.99165,-97.0631,1.585)); +#174777 = VECTOR('',#174778,1.); +#174778 = DIRECTION('',(1.,0.,0.)); +#174779 = ORIENTED_EDGE('',*,*,#174780,.T.); +#174780 = EDGE_CURVE('',#174773,#174781,#174783,.T.); +#174781 = VERTEX_POINT('',#174782); +#174782 = CARTESIAN_POINT('',(212.88165,-86.0831,1.585)); +#174783 = LINE('',#174784,#174785); +#174784 = CARTESIAN_POINT('',(212.88165,-97.0631,1.585)); +#174785 = VECTOR('',#174786,1.); +#174786 = DIRECTION('',(0.,1.,0.)); +#174787 = ORIENTED_EDGE('',*,*,#174788,.T.); +#174788 = EDGE_CURVE('',#174781,#174613,#174789,.T.); +#174789 = LINE('',#174790,#174791); +#174790 = CARTESIAN_POINT('',(212.88165,-86.0831,1.585)); +#174791 = VECTOR('',#174792,1.); +#174792 = DIRECTION('',(-1.,0.,0.)); +#174793 = FACE_BOUND('',#174794,.F.); +#174794 = EDGE_LOOP('',(#174795,#174805,#174813,#174821,#174829,#174838, + #174846,#174855,#174863,#174871)); +#174795 = ORIENTED_EDGE('',*,*,#174796,.T.); +#174796 = EDGE_CURVE('',#174797,#174799,#174801,.T.); +#174797 = VERTEX_POINT('',#174798); +#174798 = CARTESIAN_POINT('',(213.64165,-97.8231,1.585)); +#174799 = VERTEX_POINT('',#174800); +#174800 = CARTESIAN_POINT('',(213.64165,-85.3231,1.585)); +#174801 = LINE('',#174802,#174803); +#174802 = CARTESIAN_POINT('',(213.64165,-97.8231,1.585)); +#174803 = VECTOR('',#174804,1.); +#174804 = DIRECTION('',(0.,1.,0.)); +#174805 = ORIENTED_EDGE('',*,*,#174806,.T.); +#174806 = EDGE_CURVE('',#174799,#174807,#174809,.T.); +#174807 = VERTEX_POINT('',#174808); +#174808 = CARTESIAN_POINT('',(210.05165,-85.3231,1.585)); +#174809 = LINE('',#174810,#174811); +#174810 = CARTESIAN_POINT('',(213.64165,-85.3231,1.585)); +#174811 = VECTOR('',#174812,1.); +#174812 = DIRECTION('',(-1.,0.,0.)); +#174813 = ORIENTED_EDGE('',*,*,#174814,.T.); +#174814 = EDGE_CURVE('',#174807,#174815,#174817,.T.); +#174815 = VERTEX_POINT('',#174816); +#174816 = CARTESIAN_POINT('',(210.05165,-85.9631,1.585)); +#174817 = LINE('',#174818,#174819); +#174818 = CARTESIAN_POINT('',(210.05165,-85.3231,1.585)); +#174819 = VECTOR('',#174820,1.); +#174820 = DIRECTION('',(0.,-1.,0.)); +#174821 = ORIENTED_EDGE('',*,*,#174822,.T.); +#174822 = EDGE_CURVE('',#174815,#174823,#174825,.T.); +#174823 = VERTEX_POINT('',#174824); +#174824 = CARTESIAN_POINT('',(212.94165,-85.9631,1.585)); +#174825 = LINE('',#174826,#174827); +#174826 = CARTESIAN_POINT('',(210.05165,-85.9631,1.585)); +#174827 = VECTOR('',#174828,1.); +#174828 = DIRECTION('',(1.,0.,0.)); +#174829 = ORIENTED_EDGE('',*,*,#174830,.T.); +#174830 = EDGE_CURVE('',#174823,#174831,#174833,.T.); +#174831 = VERTEX_POINT('',#174832); +#174832 = CARTESIAN_POINT('',(213.00165,-86.0231,1.585)); +#174833 = CIRCLE('',#174834,5.999932016268E-02); +#174834 = AXIS2_PLACEMENT_3D('',#174835,#174836,#174837); +#174835 = CARTESIAN_POINT('',(212.94165067984,-86.02309932015,1.585)); +#174836 = DIRECTION('',(0.,0.,-1.)); +#174837 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#174838 = ORIENTED_EDGE('',*,*,#174839,.T.); +#174839 = EDGE_CURVE('',#174831,#174840,#174842,.T.); +#174840 = VERTEX_POINT('',#174841); +#174841 = CARTESIAN_POINT('',(213.00165,-97.1231,1.585)); +#174842 = LINE('',#174843,#174844); +#174843 = CARTESIAN_POINT('',(213.00165,-86.0231,1.585)); +#174844 = VECTOR('',#174845,1.); +#174845 = DIRECTION('',(0.,-1.,0.)); +#174846 = ORIENTED_EDGE('',*,*,#174847,.T.); +#174847 = EDGE_CURVE('',#174840,#174848,#174850,.T.); +#174848 = VERTEX_POINT('',#174849); +#174849 = CARTESIAN_POINT('',(212.94165,-97.1831,1.585)); +#174850 = CIRCLE('',#174851,5.999932016262E-02); +#174851 = AXIS2_PLACEMENT_3D('',#174852,#174853,#174854); +#174852 = CARTESIAN_POINT('',(212.94165067984,-97.12310067984,1.585)); +#174853 = DIRECTION('',(0.,0.,-1.)); +#174854 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#174855 = ORIENTED_EDGE('',*,*,#174856,.T.); +#174856 = EDGE_CURVE('',#174848,#174857,#174859,.T.); +#174857 = VERTEX_POINT('',#174858); +#174858 = CARTESIAN_POINT('',(210.05165,-97.1831,1.585)); +#174859 = LINE('',#174860,#174861); +#174860 = CARTESIAN_POINT('',(212.94165,-97.1831,1.585)); +#174861 = VECTOR('',#174862,1.); +#174862 = DIRECTION('',(-1.,0.,0.)); +#174863 = ORIENTED_EDGE('',*,*,#174864,.T.); +#174864 = EDGE_CURVE('',#174857,#174865,#174867,.T.); +#174865 = VERTEX_POINT('',#174866); +#174866 = CARTESIAN_POINT('',(210.05165,-97.8231,1.585)); +#174867 = LINE('',#174868,#174869); +#174868 = CARTESIAN_POINT('',(210.05165,-97.1831,1.585)); +#174869 = VECTOR('',#174870,1.); +#174870 = DIRECTION('',(0.,-1.,0.)); +#174871 = ORIENTED_EDGE('',*,*,#174872,.T.); +#174872 = EDGE_CURVE('',#174865,#174797,#174873,.T.); +#174873 = LINE('',#174874,#174875); +#174874 = CARTESIAN_POINT('',(210.05165,-97.8231,1.585)); +#174875 = VECTOR('',#174876,1.); +#174876 = DIRECTION('',(1.,0.,0.)); +#174877 = FACE_BOUND('',#174878,.F.); +#174878 = EDGE_LOOP('',(#174879,#174889,#174897,#174905)); +#174879 = ORIENTED_EDGE('',*,*,#174880,.T.); +#174880 = EDGE_CURVE('',#174881,#174883,#174885,.T.); +#174881 = VERTEX_POINT('',#174882); +#174882 = CARTESIAN_POINT('',(208.43165,-97.8131,1.585)); +#174883 = VERTEX_POINT('',#174884); +#174884 = CARTESIAN_POINT('',(208.43165,-96.1331,1.585)); +#174885 = LINE('',#174886,#174887); +#174886 = CARTESIAN_POINT('',(208.43165,-97.8131,1.585)); +#174887 = VECTOR('',#174888,1.); +#174888 = DIRECTION('',(0.,1.,0.)); +#174889 = ORIENTED_EDGE('',*,*,#174890,.T.); +#174890 = EDGE_CURVE('',#174883,#174891,#174893,.T.); +#174891 = VERTEX_POINT('',#174892); +#174892 = CARTESIAN_POINT('',(207.80165,-96.1331,1.585)); +#174893 = LINE('',#174894,#174895); +#174894 = CARTESIAN_POINT('',(208.43165,-96.1331,1.585)); +#174895 = VECTOR('',#174896,1.); +#174896 = DIRECTION('',(-1.,0.,0.)); +#174897 = ORIENTED_EDGE('',*,*,#174898,.T.); +#174898 = EDGE_CURVE('',#174891,#174899,#174901,.T.); +#174899 = VERTEX_POINT('',#174900); +#174900 = CARTESIAN_POINT('',(207.80165,-97.8131,1.585)); +#174901 = LINE('',#174902,#174903); +#174902 = CARTESIAN_POINT('',(207.80165,-96.1331,1.585)); +#174903 = VECTOR('',#174904,1.); +#174904 = DIRECTION('',(0.,-1.,0.)); +#174905 = ORIENTED_EDGE('',*,*,#174906,.T.); +#174906 = EDGE_CURVE('',#174899,#174881,#174907,.T.); +#174907 = LINE('',#174908,#174909); +#174908 = CARTESIAN_POINT('',(207.80165,-97.8131,1.585)); +#174909 = VECTOR('',#174910,1.); +#174910 = DIRECTION('',(1.,0.,0.)); +#174911 = FACE_BOUND('',#174912,.F.); +#174912 = EDGE_LOOP('',(#174913,#174923,#174931,#174939)); +#174913 = ORIENTED_EDGE('',*,*,#174914,.T.); +#174914 = EDGE_CURVE('',#174915,#174917,#174919,.T.); +#174915 = VERTEX_POINT('',#174916); +#174916 = CARTESIAN_POINT('',(208.43165,-94.5131,1.585)); +#174917 = VERTEX_POINT('',#174918); +#174918 = CARTESIAN_POINT('',(208.43165,-88.6331,1.585)); +#174919 = LINE('',#174920,#174921); +#174920 = CARTESIAN_POINT('',(208.43165,-94.5131,1.585)); +#174921 = VECTOR('',#174922,1.); +#174922 = DIRECTION('',(0.,1.,0.)); +#174923 = ORIENTED_EDGE('',*,*,#174924,.T.); +#174924 = EDGE_CURVE('',#174917,#174925,#174927,.T.); +#174925 = VERTEX_POINT('',#174926); +#174926 = CARTESIAN_POINT('',(207.80165,-88.6331,1.585)); +#174927 = LINE('',#174928,#174929); +#174928 = CARTESIAN_POINT('',(208.43165,-88.6331,1.585)); +#174929 = VECTOR('',#174930,1.); +#174930 = DIRECTION('',(-1.,0.,0.)); +#174931 = ORIENTED_EDGE('',*,*,#174932,.T.); +#174932 = EDGE_CURVE('',#174925,#174933,#174935,.T.); +#174933 = VERTEX_POINT('',#174934); +#174934 = CARTESIAN_POINT('',(207.80165,-94.5131,1.585)); +#174935 = LINE('',#174936,#174937); +#174936 = CARTESIAN_POINT('',(207.80165,-88.6331,1.585)); +#174937 = VECTOR('',#174938,1.); +#174938 = DIRECTION('',(0.,-1.,0.)); +#174939 = ORIENTED_EDGE('',*,*,#174940,.T.); +#174940 = EDGE_CURVE('',#174933,#174915,#174941,.T.); +#174941 = LINE('',#174942,#174943); +#174942 = CARTESIAN_POINT('',(207.80165,-94.5131,1.585)); +#174943 = VECTOR('',#174944,1.); +#174944 = DIRECTION('',(1.,0.,0.)); +#174945 = FACE_BOUND('',#174946,.F.); +#174946 = EDGE_LOOP('',(#174947,#174957,#174965,#174973)); +#174947 = ORIENTED_EDGE('',*,*,#174948,.T.); +#174948 = EDGE_CURVE('',#174949,#174951,#174953,.T.); +#174949 = VERTEX_POINT('',#174950); +#174950 = CARTESIAN_POINT('',(208.43165,-87.0131,1.585)); +#174951 = VERTEX_POINT('',#174952); +#174952 = CARTESIAN_POINT('',(208.43165,-85.3331,1.585)); +#174953 = LINE('',#174954,#174955); +#174954 = CARTESIAN_POINT('',(208.43165,-87.0131,1.585)); +#174955 = VECTOR('',#174956,1.); +#174956 = DIRECTION('',(0.,1.,0.)); +#174957 = ORIENTED_EDGE('',*,*,#174958,.T.); +#174958 = EDGE_CURVE('',#174951,#174959,#174961,.T.); +#174959 = VERTEX_POINT('',#174960); +#174960 = CARTESIAN_POINT('',(207.80165,-85.3331,1.585)); +#174961 = LINE('',#174962,#174963); +#174962 = CARTESIAN_POINT('',(208.43165,-85.3331,1.585)); +#174963 = VECTOR('',#174964,1.); +#174964 = DIRECTION('',(-1.,0.,0.)); +#174965 = ORIENTED_EDGE('',*,*,#174966,.T.); +#174966 = EDGE_CURVE('',#174959,#174967,#174969,.T.); +#174967 = VERTEX_POINT('',#174968); +#174968 = CARTESIAN_POINT('',(207.80165,-87.0131,1.585)); +#174969 = LINE('',#174970,#174971); +#174970 = CARTESIAN_POINT('',(207.80165,-85.3331,1.585)); +#174971 = VECTOR('',#174972,1.); +#174972 = DIRECTION('',(0.,-1.,0.)); +#174973 = ORIENTED_EDGE('',*,*,#174974,.T.); +#174974 = EDGE_CURVE('',#174967,#174949,#174975,.T.); +#174975 = LINE('',#174976,#174977); +#174976 = CARTESIAN_POINT('',(207.80165,-87.0131,1.585)); +#174977 = VECTOR('',#174978,1.); +#174978 = DIRECTION('',(1.,0.,0.)); +#174979 = PLANE('',#174980); +#174980 = AXIS2_PLACEMENT_3D('',#174981,#174982,#174983); +#174981 = CARTESIAN_POINT('',(0.,0.,1.585)); +#174982 = DIRECTION('',(0.,0.,1.)); +#174983 = DIRECTION('',(1.,0.,-0.)); +#174984 = SHELL_BASED_SURFACE_MODEL('',(#174985)); +#174985 = OPEN_SHELL('',(#174986)); +#174986 = ADVANCED_FACE('',(#174987),#175023,.T.); +#174987 = FACE_BOUND('',#174988,.F.); +#174988 = EDGE_LOOP('',(#174989,#175000,#175008,#175017)); +#174989 = ORIENTED_EDGE('',*,*,#174990,.T.); +#174990 = EDGE_CURVE('',#174991,#174993,#174995,.T.); +#174991 = VERTEX_POINT('',#174992); +#174992 = CARTESIAN_POINT('',(112.27607,-97.8931,1.585)); +#174993 = VERTEX_POINT('',#174994); +#174994 = CARTESIAN_POINT('',(112.27607,-97.7731,1.585)); +#174995 = CIRCLE('',#174996,6.000000000043E-02); +#174996 = AXIS2_PLACEMENT_3D('',#174997,#174998,#174999); +#174997 = CARTESIAN_POINT('',(112.27606977441,-97.8331,1.585)); +#174998 = DIRECTION('',(0.,0.,-1.)); +#174999 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#175000 = ORIENTED_EDGE('',*,*,#175001,.T.); +#175001 = EDGE_CURVE('',#174993,#175002,#175004,.T.); +#175002 = VERTEX_POINT('',#175003); +#175003 = CARTESIAN_POINT('',(112.55723,-97.7731,1.585)); +#175004 = LINE('',#175005,#175006); +#175005 = CARTESIAN_POINT('',(112.27607,-97.7731,1.585)); +#175006 = VECTOR('',#175007,1.); +#175007 = DIRECTION('',(1.,0.,0.)); +#175008 = ORIENTED_EDGE('',*,*,#175009,.T.); +#175009 = EDGE_CURVE('',#175002,#175010,#175012,.T.); +#175010 = VERTEX_POINT('',#175011); +#175011 = CARTESIAN_POINT('',(112.55723,-97.8931,1.585)); +#175012 = CIRCLE('',#175013,6.000000000042E-02); +#175013 = AXIS2_PLACEMENT_3D('',#175014,#175015,#175016); +#175014 = CARTESIAN_POINT('',(112.55723022558,-97.8331,1.585)); +#175015 = DIRECTION('',(0.,0.,-1.)); +#175016 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#175017 = ORIENTED_EDGE('',*,*,#175018,.T.); +#175018 = EDGE_CURVE('',#175010,#174991,#175019,.T.); +#175019 = LINE('',#175020,#175021); +#175020 = CARTESIAN_POINT('',(112.55723,-97.8931,1.585)); +#175021 = VECTOR('',#175022,1.); +#175022 = DIRECTION('',(-1.,0.,0.)); +#175023 = PLANE('',#175024); +#175024 = AXIS2_PLACEMENT_3D('',#175025,#175026,#175027); +#175025 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175026 = DIRECTION('',(0.,0.,1.)); +#175027 = DIRECTION('',(1.,0.,-0.)); +#175028 = SHELL_BASED_SURFACE_MODEL('',(#175029)); +#175029 = OPEN_SHELL('',(#175030)); +#175030 = ADVANCED_FACE('',(#175031),#175216,.T.); +#175031 = FACE_BOUND('',#175032,.F.); +#175032 = EDGE_LOOP('',(#175033,#175044,#175052,#175061,#175069,#175078, + #175086,#175094,#175102,#175111,#175119,#175128,#175136,#175145, + #175153,#175161,#175169,#175177,#175185,#175193,#175201,#175210)); +#175033 = ORIENTED_EDGE('',*,*,#175034,.T.); +#175034 = EDGE_CURVE('',#175035,#175037,#175039,.T.); +#175035 = VERTEX_POINT('',#175036); +#175036 = CARTESIAN_POINT('',(180.880039,-96.903597,1.585)); +#175037 = VERTEX_POINT('',#175038); +#175038 = CARTESIAN_POINT('',(180.97474,-97.01899,1.585)); +#175039 = CIRCLE('',#175040,7.500003178656E-02); +#175040 = AXIS2_PLACEMENT_3D('',#175041,#175042,#175043); +#175041 = CARTESIAN_POINT('',(180.9217065,-96.96595743787,1.585)); +#175042 = DIRECTION('',(0.,0.,-1.)); +#175043 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#175044 = ORIENTED_EDGE('',*,*,#175045,.T.); +#175045 = EDGE_CURVE('',#175037,#175046,#175048,.T.); +#175046 = VERTEX_POINT('',#175047); +#175047 = CARTESIAN_POINT('',(180.93964,-97.054089,1.585)); +#175048 = LINE('',#175049,#175050); +#175049 = CARTESIAN_POINT('',(180.97474,-97.01899,1.585)); +#175050 = VECTOR('',#175051,1.); +#175051 = DIRECTION('',(-0.707116854004,-0.707096708225,0.)); +#175052 = ORIENTED_EDGE('',*,*,#175053,.T.); +#175053 = EDGE_CURVE('',#175046,#175054,#175056,.T.); +#175054 = VERTEX_POINT('',#175055); +#175055 = CARTESIAN_POINT('',(180.93964,-97.354014,1.585)); +#175056 = CIRCLE('',#175057,0.299310989749); +#175057 = AXIS2_PLACEMENT_3D('',#175058,#175059,#175060); +#175058 = CARTESIAN_POINT('',(181.19867342868,-97.2040515,1.585)); +#175059 = DIRECTION('',(0.,0.,1.)); +#175060 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#175061 = ORIENTED_EDGE('',*,*,#175062,.T.); +#175062 = EDGE_CURVE('',#175054,#175063,#175065,.T.); +#175063 = VERTEX_POINT('',#175064); +#175064 = CARTESIAN_POINT('',(181.013753,-97.428127,1.585)); +#175065 = LINE('',#175066,#175067); +#175066 = CARTESIAN_POINT('',(180.93964,-97.354014,1.585)); +#175067 = VECTOR('',#175068,1.); +#175068 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#175069 = ORIENTED_EDGE('',*,*,#175070,.T.); +#175070 = EDGE_CURVE('',#175063,#175071,#175073,.T.); +#175071 = VERTEX_POINT('',#175072); +#175072 = CARTESIAN_POINT('',(181.388663,-97.510004,1.585)); +#175073 = CIRCLE('',#175074,0.611738044646); +#175074 = AXIS2_PLACEMENT_3D('',#175075,#175076,#175077); +#175075 = CARTESIAN_POINT('',(181.32514337395,-96.90157266256,1.585)); +#175076 = DIRECTION('',(0.,0.,1.)); +#175077 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#175078 = ORIENTED_EDGE('',*,*,#175079,.T.); +#175079 = EDGE_CURVE('',#175071,#175080,#175082,.T.); +#175080 = VERTEX_POINT('',#175081); +#175081 = CARTESIAN_POINT('',(181.562197,-97.46662,1.585)); +#175082 = LINE('',#175083,#175084); +#175083 = CARTESIAN_POINT('',(181.388663,-97.510004,1.585)); +#175084 = VECTOR('',#175085,1.); +#175085 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#175086 = ORIENTED_EDGE('',*,*,#175087,.T.); +#175087 = EDGE_CURVE('',#175080,#175088,#175090,.T.); +#175088 = VERTEX_POINT('',#175089); +#175089 = CARTESIAN_POINT('',(181.639184,-97.428126,1.585)); +#175090 = LINE('',#175091,#175092); +#175091 = CARTESIAN_POINT('',(181.562197,-97.46662,1.585)); +#175092 = VECTOR('',#175093,1.); +#175093 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#175094 = ORIENTED_EDGE('',*,*,#175095,.T.); +#175095 = EDGE_CURVE('',#175088,#175096,#175098,.T.); +#175096 = VERTEX_POINT('',#175097); +#175097 = CARTESIAN_POINT('',(181.713298,-97.354013,1.585)); +#175098 = LINE('',#175099,#175100); +#175099 = CARTESIAN_POINT('',(181.639184,-97.428126,1.585)); +#175100 = VECTOR('',#175101,1.); +#175101 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#175102 = ORIENTED_EDGE('',*,*,#175103,.T.); +#175103 = EDGE_CURVE('',#175096,#175104,#175106,.T.); +#175104 = VERTEX_POINT('',#175105); +#175105 = CARTESIAN_POINT('',(181.713298,-97.05409,1.585)); +#175106 = CIRCLE('',#175107,0.299306284995); +#175107 = AXIS2_PLACEMENT_3D('',#175108,#175109,#175110); +#175108 = CARTESIAN_POINT('',(181.45426942868,-97.2040515,1.585)); +#175109 = DIRECTION('',(0.,-0.,1.)); +#175110 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#175111 = ORIENTED_EDGE('',*,*,#175112,.T.); +#175112 = EDGE_CURVE('',#175104,#175113,#175115,.T.); +#175113 = VERTEX_POINT('',#175114); +#175114 = CARTESIAN_POINT('',(181.66887,-97.007625,1.585)); +#175115 = LINE('',#175116,#175117); +#175116 = CARTESIAN_POINT('',(181.713298,-97.05409,1.585)); +#175117 = VECTOR('',#175118,1.); +#175118 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#175119 = ORIENTED_EDGE('',*,*,#175120,.T.); +#175120 = EDGE_CURVE('',#175113,#175121,#175123,.T.); +#175121 = VERTEX_POINT('',#175122); +#175122 = CARTESIAN_POINT('',(181.784262,-96.912923,1.585)); +#175123 = CIRCLE('',#175124,7.499993690526E-02); +#175124 = AXIS2_PLACEMENT_3D('',#175125,#175126,#175127); +#175125 = CARTESIAN_POINT('',(181.73122982375,-96.96595675169,1.585)); +#175126 = DIRECTION('',(0.,0.,-1.)); +#175127 = DIRECTION('',(-0.831465016204,-0.555577111506,-0.)); +#175128 = ORIENTED_EDGE('',*,*,#175129,.T.); +#175129 = EDGE_CURVE('',#175121,#175130,#175132,.T.); +#175130 = VERTEX_POINT('',#175131); +#175131 = CARTESIAN_POINT('',(181.844007,-96.976433,1.585)); +#175132 = LINE('',#175133,#175134); +#175133 = CARTESIAN_POINT('',(181.784262,-96.912923,1.585)); +#175134 = VECTOR('',#175135,1.); +#175135 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#175136 = ORIENTED_EDGE('',*,*,#175137,.T.); +#175137 = EDGE_CURVE('',#175130,#175138,#175140,.T.); +#175138 = VERTEX_POINT('',#175139); +#175139 = CARTESIAN_POINT('',(181.841211,-97.436196,1.585)); +#175140 = CIRCLE('',#175141,0.461068563463); +#175141 = AXIS2_PLACEMENT_3D('',#175142,#175143,#175144); +#175142 = CARTESIAN_POINT('',(181.44294557362,-97.20388398919,1.585)); +#175143 = DIRECTION('',(0.,0.,-1.)); +#175144 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#175145 = ORIENTED_EDGE('',*,*,#175146,.T.); +#175146 = EDGE_CURVE('',#175138,#175147,#175149,.T.); +#175147 = VERTEX_POINT('',#175148); +#175148 = CARTESIAN_POINT('',(181.723448,-97.552884,1.585)); +#175149 = LINE('',#175150,#175151); +#175150 = CARTESIAN_POINT('',(181.841211,-97.436196,1.585)); +#175151 = VECTOR('',#175152,1.); +#175152 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#175153 = ORIENTED_EDGE('',*,*,#175154,.T.); +#175154 = EDGE_CURVE('',#175147,#175155,#175157,.T.); +#175155 = VERTEX_POINT('',#175156); +#175156 = CARTESIAN_POINT('',(181.606563,-97.610146,1.585)); +#175157 = LINE('',#175158,#175159); +#175158 = CARTESIAN_POINT('',(181.723448,-97.552884,1.585)); +#175159 = VECTOR('',#175160,1.); +#175160 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#175161 = ORIENTED_EDGE('',*,*,#175162,.T.); +#175162 = EDGE_CURVE('',#175155,#175163,#175165,.T.); +#175163 = VERTEX_POINT('',#175164); +#175164 = CARTESIAN_POINT('',(181.397897,-97.660004,1.585)); +#175165 = LINE('',#175166,#175167); +#175166 = CARTESIAN_POINT('',(181.606563,-97.610146,1.585)); +#175167 = VECTOR('',#175168,1.); +#175168 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#175169 = ORIENTED_EDGE('',*,*,#175170,.T.); +#175170 = EDGE_CURVE('',#175163,#175171,#175173,.T.); +#175171 = VERTEX_POINT('',#175172); +#175172 = CARTESIAN_POINT('',(181.23685,-97.657765,1.585)); +#175173 = LINE('',#175174,#175175); +#175174 = CARTESIAN_POINT('',(181.397897,-97.660004,1.585)); +#175175 = VECTOR('',#175176,1.); +#175176 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#175177 = ORIENTED_EDGE('',*,*,#175178,.T.); +#175178 = EDGE_CURVE('',#175171,#175179,#175181,.T.); +#175179 = VERTEX_POINT('',#175180); +#175180 = CARTESIAN_POINT('',(181.031023,-97.604467,1.585)); +#175181 = LINE('',#175182,#175183); +#175182 = CARTESIAN_POINT('',(181.23685,-97.657765,1.585)); +#175183 = VECTOR('',#175184,1.); +#175184 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#175185 = ORIENTED_EDGE('',*,*,#175186,.T.); +#175186 = EDGE_CURVE('',#175179,#175187,#175189,.T.); +#175187 = VERTEX_POINT('',#175188); +#175188 = CARTESIAN_POINT('',(180.922043,-97.547519,1.585)); +#175189 = LINE('',#175190,#175191); +#175190 = CARTESIAN_POINT('',(181.031023,-97.604467,1.585)); +#175191 = VECTOR('',#175192,1.); +#175192 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#175193 = ORIENTED_EDGE('',*,*,#175194,.T.); +#175194 = EDGE_CURVE('',#175187,#175195,#175197,.T.); +#175195 = VERTEX_POINT('',#175196); +#175196 = CARTESIAN_POINT('',(180.808931,-97.43167,1.585)); +#175197 = LINE('',#175198,#175199); +#175198 = CARTESIAN_POINT('',(180.922043,-97.547519,1.585)); +#175199 = VECTOR('',#175200,1.); +#175200 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#175201 = ORIENTED_EDGE('',*,*,#175202,.T.); +#175202 = EDGE_CURVE('',#175195,#175203,#175205,.T.); +#175203 = VERTEX_POINT('',#175204); +#175204 = CARTESIAN_POINT('',(180.811728,-96.971908,1.585)); +#175205 = CIRCLE('',#175206,0.461058290907); +#175206 = AXIS2_PLACEMENT_3D('',#175207,#175208,#175209); +#175207 = CARTESIAN_POINT('',(181.20998135644,-97.20422031499,1.585)); +#175208 = DIRECTION('',(0.,0.,-1.)); +#175209 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#175210 = ORIENTED_EDGE('',*,*,#175211,.T.); +#175211 = EDGE_CURVE('',#175203,#175035,#175212,.T.); +#175212 = LINE('',#175213,#175214); +#175213 = CARTESIAN_POINT('',(180.811728,-96.971908,1.585)); +#175214 = VECTOR('',#175215,1.); +#175215 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#175216 = PLANE('',#175217); +#175217 = AXIS2_PLACEMENT_3D('',#175218,#175219,#175220); +#175218 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175219 = DIRECTION('',(0.,0.,1.)); +#175220 = DIRECTION('',(1.,0.,-0.)); +#175221 = SHELL_BASED_SURFACE_MODEL('',(#175222)); +#175222 = OPEN_SHELL('',(#175223)); +#175223 = ADVANCED_FACE('',(#175224),#175260,.T.); +#175224 = FACE_BOUND('',#175225,.F.); +#175225 = EDGE_LOOP('',(#175226,#175237,#175245,#175254)); +#175226 = ORIENTED_EDGE('',*,*,#175227,.T.); +#175227 = EDGE_CURVE('',#175228,#175230,#175232,.T.); +#175228 = VERTEX_POINT('',#175229); +#175229 = CARTESIAN_POINT('',(99.930398,-97.6481,1.585)); +#175230 = VERTEX_POINT('',#175231); +#175231 = CARTESIAN_POINT('',(99.930398,-97.5281,1.585)); +#175232 = CIRCLE('',#175233,6.000000000043E-02); +#175233 = AXIS2_PLACEMENT_3D('',#175234,#175235,#175236); +#175234 = CARTESIAN_POINT('',(99.930397774412,-97.5881,1.585)); +#175235 = DIRECTION('',(0.,0.,-1.)); +#175236 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#175237 = ORIENTED_EDGE('',*,*,#175238,.T.); +#175238 = EDGE_CURVE('',#175230,#175239,#175241,.T.); +#175239 = VERTEX_POINT('',#175240); +#175240 = CARTESIAN_POINT('',(100.452902,-97.5281,1.585)); +#175241 = LINE('',#175242,#175243); +#175242 = CARTESIAN_POINT('',(99.930398,-97.5281,1.585)); +#175243 = VECTOR('',#175244,1.); +#175244 = DIRECTION('',(1.,0.,0.)); +#175245 = ORIENTED_EDGE('',*,*,#175246,.T.); +#175246 = EDGE_CURVE('',#175239,#175247,#175249,.T.); +#175247 = VERTEX_POINT('',#175248); +#175248 = CARTESIAN_POINT('',(100.452902,-97.6481,1.585)); +#175249 = CIRCLE('',#175250,6.000000000043E-02); +#175250 = AXIS2_PLACEMENT_3D('',#175251,#175252,#175253); +#175251 = CARTESIAN_POINT('',(100.45290222558,-97.5881,1.585)); +#175252 = DIRECTION('',(0.,0.,-1.)); +#175253 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#175254 = ORIENTED_EDGE('',*,*,#175255,.T.); +#175255 = EDGE_CURVE('',#175247,#175228,#175256,.T.); +#175256 = LINE('',#175257,#175258); +#175257 = CARTESIAN_POINT('',(100.452902,-97.6481,1.585)); +#175258 = VECTOR('',#175259,1.); +#175259 = DIRECTION('',(-1.,0.,0.)); +#175260 = PLANE('',#175261); +#175261 = AXIS2_PLACEMENT_3D('',#175262,#175263,#175264); +#175262 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175263 = DIRECTION('',(0.,0.,1.)); +#175264 = DIRECTION('',(1.,0.,-0.)); +#175265 = SHELL_BASED_SURFACE_MODEL('',(#175266)); +#175266 = OPEN_SHELL('',(#175267)); +#175267 = ADVANCED_FACE('',(#175268,#175440),#175523,.T.); +#175268 = FACE_BOUND('',#175269,.F.); +#175269 = EDGE_LOOP('',(#175270,#175280,#175288,#175296,#175304,#175312, + #175320,#175328,#175336,#175344,#175352,#175360,#175369,#175377, + #175386,#175394,#175402,#175410,#175418,#175426,#175434)); +#175270 = ORIENTED_EDGE('',*,*,#175271,.T.); +#175271 = EDGE_CURVE('',#175272,#175274,#175276,.T.); +#175272 = VERTEX_POINT('',#175273); +#175273 = CARTESIAN_POINT('',(82.877073,-95.868137,1.585)); +#175274 = VERTEX_POINT('',#175275); +#175275 = CARTESIAN_POINT('',(83.168409,-95.724375,1.585)); +#175276 = LINE('',#175277,#175278); +#175277 = CARTESIAN_POINT('',(82.877073,-95.868137,1.585)); +#175278 = VECTOR('',#175279,1.); +#175279 = DIRECTION('',(0.896761620593,0.442513949871,0.)); +#175280 = ORIENTED_EDGE('',*,*,#175281,.T.); +#175281 = EDGE_CURVE('',#175274,#175282,#175284,.T.); +#175282 = VERTEX_POINT('',#175283); +#175283 = CARTESIAN_POINT('',(83.208028,-95.719049,1.585)); +#175284 = LINE('',#175285,#175286); +#175285 = CARTESIAN_POINT('',(83.168409,-95.724375,1.585)); +#175286 = VECTOR('',#175287,1.); +#175287 = DIRECTION('',(0.991084879219,0.133231986338,0.)); +#175288 = ORIENTED_EDGE('',*,*,#175289,.T.); +#175289 = EDGE_CURVE('',#175282,#175290,#175292,.T.); +#175290 = VERTEX_POINT('',#175291); +#175291 = CARTESIAN_POINT('',(83.980149,-95.721931,1.585)); +#175292 = LINE('',#175293,#175294); +#175293 = CARTESIAN_POINT('',(83.208028,-95.719049,1.585)); +#175294 = VECTOR('',#175295,1.); +#175295 = DIRECTION('',(0.999993034013,-3.732549592646E-03,0.)); +#175296 = ORIENTED_EDGE('',*,*,#175297,.T.); +#175297 = EDGE_CURVE('',#175290,#175298,#175300,.T.); +#175298 = VERTEX_POINT('',#175299); +#175299 = CARTESIAN_POINT('',(84.017967,-95.734885,1.585)); +#175300 = LINE('',#175301,#175302); +#175301 = CARTESIAN_POINT('',(83.980149,-95.721931,1.585)); +#175302 = VECTOR('',#175303,1.); +#175303 = DIRECTION('',(0.946039317712,-0.32405186212,0.)); +#175304 = ORIENTED_EDGE('',*,*,#175305,.T.); +#175305 = EDGE_CURVE('',#175298,#175306,#175308,.T.); +#175306 = VERTEX_POINT('',#175307); +#175307 = CARTESIAN_POINT('',(84.290471,-95.874359,1.585)); +#175308 = LINE('',#175309,#175310); +#175309 = CARTESIAN_POINT('',(84.017967,-95.734885,1.585)); +#175310 = VECTOR('',#175311,1.); +#175311 = DIRECTION('',(0.890177487146,-0.455613917015,0.)); +#175312 = ORIENTED_EDGE('',*,*,#175313,.T.); +#175313 = EDGE_CURVE('',#175306,#175314,#175316,.T.); +#175314 = VERTEX_POINT('',#175315); +#175315 = CARTESIAN_POINT('',(84.447035,-96.033333,1.585)); +#175316 = LINE('',#175317,#175318); +#175317 = CARTESIAN_POINT('',(84.290471,-95.874359,1.585)); +#175318 = VECTOR('',#175319,1.); +#175319 = DIRECTION('',(0.701685610985,-0.712486703972,0.)); +#175320 = ORIENTED_EDGE('',*,*,#175321,.T.); +#175321 = EDGE_CURVE('',#175314,#175322,#175324,.T.); +#175322 = VERTEX_POINT('',#175323); +#175323 = CARTESIAN_POINT('',(84.590797,-96.324668,1.585)); +#175324 = LINE('',#175325,#175326); +#175325 = CARTESIAN_POINT('',(84.447035,-96.033333,1.585)); +#175326 = VECTOR('',#175327,1.); +#175327 = DIRECTION('',(0.442515171356,-0.896761017841,0.)); +#175328 = ORIENTED_EDGE('',*,*,#175329,.T.); +#175329 = EDGE_CURVE('',#175322,#175330,#175332,.T.); +#175330 = VERTEX_POINT('',#175331); +#175331 = CARTESIAN_POINT('',(84.596123,-96.364287,1.585)); +#175332 = LINE('',#175333,#175334); +#175333 = CARTESIAN_POINT('',(84.590797,-96.324668,1.585)); +#175334 = VECTOR('',#175335,1.); +#175335 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#175336 = ORIENTED_EDGE('',*,*,#175337,.T.); +#175337 = EDGE_CURVE('',#175330,#175338,#175340,.T.); +#175338 = VERTEX_POINT('',#175339); +#175339 = CARTESIAN_POINT('',(84.593241,-96.888789,1.585)); +#175340 = LINE('',#175341,#175342); +#175341 = CARTESIAN_POINT('',(84.596123,-96.364287,1.585)); +#175342 = VECTOR('',#175343,1.); +#175343 = DIRECTION('',(-5.494653012067E-03,-0.99998490428,0.)); +#175344 = ORIENTED_EDGE('',*,*,#175345,.T.); +#175345 = EDGE_CURVE('',#175338,#175346,#175348,.T.); +#175346 = VERTEX_POINT('',#175347); +#175347 = CARTESIAN_POINT('',(84.565019,-96.957144,1.585)); +#175348 = LINE('',#175349,#175350); +#175349 = CARTESIAN_POINT('',(84.593241,-96.888789,1.585)); +#175350 = VECTOR('',#175351,1.); +#175351 = DIRECTION('',(-0.381626303138,-0.924316701544,0.)); +#175352 = ORIENTED_EDGE('',*,*,#175353,.T.); +#175353 = EDGE_CURVE('',#175346,#175354,#175356,.T.); +#175354 = VERTEX_POINT('',#175355); +#175355 = CARTESIAN_POINT('',(85.342054,-96.960026,1.585)); +#175356 = LINE('',#175357,#175358); +#175357 = CARTESIAN_POINT('',(84.565019,-96.957144,1.585)); +#175358 = VECTOR('',#175359,1.); +#175359 = DIRECTION('',(0.999993121839,-3.708945127492E-03,0.)); +#175360 = ORIENTED_EDGE('',*,*,#175361,.T.); +#175361 = EDGE_CURVE('',#175354,#175362,#175364,.T.); +#175362 = VERTEX_POINT('',#175363); +#175363 = CARTESIAN_POINT('',(85.342054,-97.254262,1.585)); +#175364 = CIRCLE('',#175365,0.150000292066); +#175365 = AXIS2_PLACEMENT_3D('',#175366,#175367,#175368); +#175366 = CARTESIAN_POINT('',(85.31279,-97.107144,1.585)); +#175367 = DIRECTION('',(0.,0.,-1.)); +#175368 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#175369 = ORIENTED_EDGE('',*,*,#175370,.T.); +#175370 = EDGE_CURVE('',#175362,#175371,#175373,.T.); +#175371 = VERTEX_POINT('',#175372); +#175372 = CARTESIAN_POINT('',(82.683526,-97.254262,1.585)); +#175373 = LINE('',#175374,#175375); +#175374 = CARTESIAN_POINT('',(85.342054,-97.254262,1.585)); +#175375 = VECTOR('',#175376,1.); +#175376 = DIRECTION('',(-1.,0.,0.)); +#175377 = ORIENTED_EDGE('',*,*,#175378,.T.); +#175378 = EDGE_CURVE('',#175371,#175379,#175381,.T.); +#175379 = VERTEX_POINT('',#175380); +#175380 = CARTESIAN_POINT('',(82.58807,-97.023808,1.585)); +#175381 = CIRCLE('',#175382,0.150000415027); +#175382 = AXIS2_PLACEMENT_3D('',#175383,#175384,#175385); +#175383 = CARTESIAN_POINT('',(82.712790630259,-97.107144,1.585)); +#175384 = DIRECTION('',(0.,0.,-1.)); +#175385 = DIRECTION('',(-0.195096995257,-0.98078395299,-0.)); +#175386 = ORIENTED_EDGE('',*,*,#175387,.T.); +#175387 = EDGE_CURVE('',#175379,#175388,#175390,.T.); +#175388 = VERTEX_POINT('',#175389); +#175389 = CARTESIAN_POINT('',(82.614174,-96.997703,1.585)); +#175390 = LINE('',#175391,#175392); +#175391 = CARTESIAN_POINT('',(82.58807,-97.023808,1.585)); +#175392 = VECTOR('',#175393,1.); +#175393 = DIRECTION('',(0.707093237285,0.707120324829,0.)); +#175394 = ORIENTED_EDGE('',*,*,#175395,.T.); +#175395 = EDGE_CURVE('',#175388,#175396,#175398,.T.); +#175396 = VERTEX_POINT('',#175397); +#175397 = CARTESIAN_POINT('',(82.568116,-96.899144,1.585)); +#175398 = LINE('',#175399,#175400); +#175399 = CARTESIAN_POINT('',(82.614174,-96.997703,1.585)); +#175400 = VECTOR('',#175401,1.); +#175401 = DIRECTION('',(-0.423366981291,0.905958276717,0.)); +#175402 = ORIENTED_EDGE('',*,*,#175403,.T.); +#175403 = EDGE_CURVE('',#175396,#175404,#175406,.T.); +#175404 = VERTEX_POINT('',#175405); +#175405 = CARTESIAN_POINT('',(82.56279,-96.859525,1.585)); +#175406 = LINE('',#175407,#175408); +#175407 = CARTESIAN_POINT('',(82.568116,-96.899144,1.585)); +#175408 = VECTOR('',#175409,1.); +#175409 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#175410 = ORIENTED_EDGE('',*,*,#175411,.T.); +#175411 = EDGE_CURVE('',#175404,#175412,#175414,.T.); +#175412 = VERTEX_POINT('',#175413); +#175413 = CARTESIAN_POINT('',(82.565672,-96.335023,1.585)); +#175414 = LINE('',#175415,#175416); +#175415 = CARTESIAN_POINT('',(82.56279,-96.859525,1.585)); +#175416 = VECTOR('',#175417,1.); +#175417 = DIRECTION('',(5.494653012067E-03,0.99998490428,0.)); +#175418 = ORIENTED_EDGE('',*,*,#175419,.T.); +#175419 = EDGE_CURVE('',#175412,#175420,#175422,.T.); +#175420 = VERTEX_POINT('',#175421); +#175421 = CARTESIAN_POINT('',(82.578626,-96.297205,1.585)); +#175422 = LINE('',#175423,#175424); +#175423 = CARTESIAN_POINT('',(82.565672,-96.335023,1.585)); +#175424 = VECTOR('',#175425,1.); +#175425 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#175426 = ORIENTED_EDGE('',*,*,#175427,.T.); +#175427 = EDGE_CURVE('',#175420,#175428,#175430,.T.); +#175428 = VERTEX_POINT('',#175429); +#175429 = CARTESIAN_POINT('',(82.718101,-96.0247,1.585)); +#175430 = LINE('',#175431,#175432); +#175431 = CARTESIAN_POINT('',(82.578626,-96.297205,1.585)); +#175432 = VECTOR('',#175433,1.); +#175433 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#175434 = ORIENTED_EDGE('',*,*,#175435,.T.); +#175435 = EDGE_CURVE('',#175428,#175272,#175436,.T.); +#175436 = LINE('',#175437,#175438); +#175437 = CARTESIAN_POINT('',(82.718101,-96.0247,1.585)); +#175438 = VECTOR('',#175439,1.); +#175439 = DIRECTION('',(0.712484531253,0.701687817141,0.)); +#175440 = FACE_BOUND('',#175441,.F.); +#175441 = EDGE_LOOP('',(#175442,#175453,#175461,#175469,#175477,#175485, + #175493,#175501,#175509,#175517)); +#175442 = ORIENTED_EDGE('',*,*,#175443,.T.); +#175443 = EDGE_CURVE('',#175444,#175446,#175448,.T.); +#175444 = VERTEX_POINT('',#175445); +#175445 = CARTESIAN_POINT('',(84.10965,-96.116136,1.585)); +#175446 = VERTEX_POINT('',#175447); +#175447 = CARTESIAN_POINT('',(83.049263,-96.116135,1.585)); +#175448 = CIRCLE('',#175449,0.974528751426); +#175449 = AXIS2_PLACEMENT_3D('',#175450,#175451,#175452); +#175450 = CARTESIAN_POINT('',(83.579455728885,-96.93381584091,1.585)); +#175451 = DIRECTION('',(0.,0.,1.)); +#175452 = DIRECTION('',(0.544051953664,0.839051531025,-0.)); +#175453 = ORIENTED_EDGE('',*,*,#175454,.T.); +#175454 = EDGE_CURVE('',#175446,#175455,#175457,.T.); +#175455 = VERTEX_POINT('',#175456); +#175456 = CARTESIAN_POINT('',(82.959878,-96.205521,1.585)); +#175457 = LINE('',#175458,#175459); +#175458 = CARTESIAN_POINT('',(83.049263,-96.116135,1.585)); +#175459 = VECTOR('',#175460,1.); +#175460 = DIRECTION('',(-0.707102825798,-0.707110736553,0.)); +#175461 = ORIENTED_EDGE('',*,*,#175462,.T.); +#175462 = EDGE_CURVE('',#175455,#175463,#175465,.T.); +#175463 = VERTEX_POINT('',#175464); +#175464 = CARTESIAN_POINT('',(82.86279,-96.399697,1.585)); +#175465 = LINE('',#175466,#175467); +#175466 = CARTESIAN_POINT('',(82.959878,-96.205521,1.585)); +#175467 = VECTOR('',#175468,1.); +#175468 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#175469 = ORIENTED_EDGE('',*,*,#175470,.T.); +#175470 = EDGE_CURVE('',#175463,#175471,#175473,.T.); +#175471 = VERTEX_POINT('',#175472); +#175472 = CARTESIAN_POINT('',(82.86279,-96.824114,1.585)); +#175473 = LINE('',#175474,#175475); +#175474 = CARTESIAN_POINT('',(82.86279,-96.399697,1.585)); +#175475 = VECTOR('',#175476,1.); +#175476 = DIRECTION('',(0.,-1.,0.)); +#175477 = ORIENTED_EDGE('',*,*,#175478,.T.); +#175478 = EDGE_CURVE('',#175471,#175479,#175481,.T.); +#175479 = VERTEX_POINT('',#175480); +#175480 = CARTESIAN_POINT('',(82.929305,-96.957144,1.585)); +#175481 = LINE('',#175482,#175483); +#175482 = CARTESIAN_POINT('',(82.86279,-96.824114,1.585)); +#175483 = VECTOR('',#175484,1.); +#175484 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#175485 = ORIENTED_EDGE('',*,*,#175486,.T.); +#175486 = EDGE_CURVE('',#175479,#175487,#175489,.T.); +#175487 = VERTEX_POINT('',#175488); +#175488 = CARTESIAN_POINT('',(84.229609,-96.957144,1.585)); +#175489 = LINE('',#175490,#175491); +#175490 = CARTESIAN_POINT('',(82.929305,-96.957144,1.585)); +#175491 = VECTOR('',#175492,1.); +#175492 = DIRECTION('',(1.,0.,0.)); +#175493 = ORIENTED_EDGE('',*,*,#175494,.T.); +#175494 = EDGE_CURVE('',#175487,#175495,#175497,.T.); +#175495 = VERTEX_POINT('',#175496); +#175496 = CARTESIAN_POINT('',(84.296123,-96.824115,1.585)); +#175497 = LINE('',#175498,#175499); +#175498 = CARTESIAN_POINT('',(84.229609,-96.957144,1.585)); +#175499 = VECTOR('',#175500,1.); +#175500 = DIRECTION('',(0.447210906074,0.894428535708,0.)); +#175501 = ORIENTED_EDGE('',*,*,#175502,.T.); +#175502 = EDGE_CURVE('',#175495,#175503,#175505,.T.); +#175503 = VERTEX_POINT('',#175504); +#175504 = CARTESIAN_POINT('',(84.296123,-96.399696,1.585)); +#175505 = LINE('',#175506,#175507); +#175506 = CARTESIAN_POINT('',(84.296123,-96.824115,1.585)); +#175507 = VECTOR('',#175508,1.); +#175508 = DIRECTION('',(0.,1.,0.)); +#175509 = ORIENTED_EDGE('',*,*,#175510,.T.); +#175510 = EDGE_CURVE('',#175503,#175511,#175513,.T.); +#175511 = VERTEX_POINT('',#175512); +#175512 = CARTESIAN_POINT('',(84.199035,-96.205521,1.585)); +#175513 = LINE('',#175514,#175515); +#175514 = CARTESIAN_POINT('',(84.296123,-96.399696,1.585)); +#175515 = VECTOR('',#175516,1.); +#175516 = DIRECTION('',(-0.447215438015,0.89442626974,0.)); +#175517 = ORIENTED_EDGE('',*,*,#175518,.T.); +#175518 = EDGE_CURVE('',#175511,#175444,#175519,.T.); +#175519 = LINE('',#175520,#175521); +#175520 = CARTESIAN_POINT('',(84.199035,-96.205521,1.585)); +#175521 = VECTOR('',#175522,1.); +#175522 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#175523 = PLANE('',#175524); +#175524 = AXIS2_PLACEMENT_3D('',#175525,#175526,#175527); +#175525 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175526 = DIRECTION('',(0.,0.,1.)); +#175527 = DIRECTION('',(1.,0.,-0.)); +#175528 = SHELL_BASED_SURFACE_MODEL('',(#175529)); +#175529 = OPEN_SHELL('',(#175530)); +#175530 = ADVANCED_FACE('',(#175531),#175716,.T.); +#175531 = FACE_BOUND('',#175532,.F.); +#175532 = EDGE_LOOP('',(#175533,#175544,#175552,#175561,#175569,#175578, + #175586,#175595,#175603,#175611,#175619,#175628,#175636,#175645, + #175653,#175662,#175670,#175678,#175686,#175694,#175702,#175710)); +#175533 = ORIENTED_EDGE('',*,*,#175534,.T.); +#175534 = EDGE_CURVE('',#175535,#175537,#175539,.T.); +#175535 = VERTEX_POINT('',#175536); +#175536 = CARTESIAN_POINT('',(99.083078,-96.080381,1.585)); +#175537 = VERTEX_POINT('',#175538); +#175538 = CARTESIAN_POINT('',(99.542841,-96.083178,1.585)); +#175539 = CIRCLE('',#175540,0.460785175821); +#175540 = AXIS2_PLACEMENT_3D('',#175541,#175542,#175543); +#175541 = CARTESIAN_POINT('',(99.310530108972,-96.48111597024,1.585)); +#175542 = DIRECTION('',(0.,0.,-1.)); +#175543 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#175544 = ORIENTED_EDGE('',*,*,#175545,.T.); +#175545 = EDGE_CURVE('',#175537,#175546,#175548,.T.); +#175546 = VERTEX_POINT('',#175547); +#175547 = CARTESIAN_POINT('',(99.611152,-96.151489,1.585)); +#175548 = LINE('',#175549,#175550); +#175549 = CARTESIAN_POINT('',(99.542841,-96.083178,1.585)); +#175550 = VECTOR('',#175551,1.); +#175551 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#175552 = ORIENTED_EDGE('',*,*,#175553,.T.); +#175553 = EDGE_CURVE('',#175546,#175554,#175556,.T.); +#175554 = VERTEX_POINT('',#175555); +#175555 = CARTESIAN_POINT('',(99.495759,-96.24619,1.585)); +#175556 = CIRCLE('',#175557,7.500003178655E-02); +#175557 = AXIS2_PLACEMENT_3D('',#175558,#175559,#175560); +#175558 = CARTESIAN_POINT('',(99.548791562127,-96.1931565,1.585)); +#175559 = DIRECTION('',(0.,0.,-1.)); +#175560 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#175561 = ORIENTED_EDGE('',*,*,#175562,.T.); +#175562 = EDGE_CURVE('',#175554,#175563,#175565,.T.); +#175563 = VERTEX_POINT('',#175564); +#175564 = CARTESIAN_POINT('',(99.460659,-96.21109,1.585)); +#175565 = LINE('',#175566,#175567); +#175566 = CARTESIAN_POINT('',(99.495759,-96.24619,1.585)); +#175567 = VECTOR('',#175568,1.); +#175568 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#175569 = ORIENTED_EDGE('',*,*,#175570,.T.); +#175570 = EDGE_CURVE('',#175563,#175571,#175573,.T.); +#175571 = VERTEX_POINT('',#175572); +#175572 = CARTESIAN_POINT('',(99.160735,-96.21109,1.585)); +#175573 = CIRCLE('',#175574,0.299308637371); +#175574 = AXIS2_PLACEMENT_3D('',#175575,#175576,#175577); +#175575 = CARTESIAN_POINT('',(99.310697,-96.470121,1.585)); +#175576 = DIRECTION('',(0.,0.,1.)); +#175577 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#175578 = ORIENTED_EDGE('',*,*,#175579,.T.); +#175579 = EDGE_CURVE('',#175571,#175580,#175582,.T.); +#175580 = VERTEX_POINT('',#175581); +#175581 = CARTESIAN_POINT('',(99.086622,-96.285203,1.585)); +#175582 = LINE('',#175583,#175584); +#175583 = CARTESIAN_POINT('',(99.160735,-96.21109,1.585)); +#175584 = VECTOR('',#175585,1.); +#175585 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#175586 = ORIENTED_EDGE('',*,*,#175587,.T.); +#175587 = EDGE_CURVE('',#175580,#175588,#175590,.T.); +#175588 = VERTEX_POINT('',#175589); +#175589 = CARTESIAN_POINT('',(99.004745,-96.660113,1.585)); +#175590 = CIRCLE('',#175591,0.611712714363); +#175591 = AXIS2_PLACEMENT_3D('',#175592,#175593,#175594); +#175592 = CARTESIAN_POINT('',(99.613150275217,-96.5965876822,1.585)); +#175593 = DIRECTION('',(0.,0.,1.)); +#175594 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#175595 = ORIENTED_EDGE('',*,*,#175596,.T.); +#175596 = EDGE_CURVE('',#175588,#175597,#175599,.T.); +#175597 = VERTEX_POINT('',#175598); +#175598 = CARTESIAN_POINT('',(99.048128,-96.833647,1.585)); +#175599 = LINE('',#175600,#175601); +#175600 = CARTESIAN_POINT('',(99.004745,-96.660113,1.585)); +#175601 = VECTOR('',#175602,1.); +#175602 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#175603 = ORIENTED_EDGE('',*,*,#175604,.T.); +#175604 = EDGE_CURVE('',#175597,#175605,#175607,.T.); +#175605 = VERTEX_POINT('',#175606); +#175606 = CARTESIAN_POINT('',(99.086622,-96.910634,1.585)); +#175607 = LINE('',#175608,#175609); +#175608 = CARTESIAN_POINT('',(99.048128,-96.833647,1.585)); +#175609 = VECTOR('',#175610,1.); +#175610 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#175611 = ORIENTED_EDGE('',*,*,#175612,.T.); +#175612 = EDGE_CURVE('',#175605,#175613,#175615,.T.); +#175613 = VERTEX_POINT('',#175614); +#175614 = CARTESIAN_POINT('',(99.160735,-96.984748,1.585)); +#175615 = LINE('',#175616,#175617); +#175616 = CARTESIAN_POINT('',(99.086622,-96.910634,1.585)); +#175617 = VECTOR('',#175618,1.); +#175618 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#175619 = ORIENTED_EDGE('',*,*,#175620,.T.); +#175620 = EDGE_CURVE('',#175613,#175621,#175623,.T.); +#175621 = VERTEX_POINT('',#175622); +#175622 = CARTESIAN_POINT('',(99.460659,-96.984747,1.585)); +#175623 = CIRCLE('',#175624,0.299305962385); +#175624 = AXIS2_PLACEMENT_3D('',#175625,#175626,#175627); +#175625 = CARTESIAN_POINT('',(99.310696136355,-96.72571959093,1.585)); +#175626 = DIRECTION('',(0.,0.,1.)); +#175627 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#175628 = ORIENTED_EDGE('',*,*,#175629,.T.); +#175629 = EDGE_CURVE('',#175621,#175630,#175632,.T.); +#175630 = VERTEX_POINT('',#175631); +#175631 = CARTESIAN_POINT('',(99.507124,-96.94032,1.585)); +#175632 = LINE('',#175633,#175634); +#175633 = CARTESIAN_POINT('',(99.460659,-96.984747,1.585)); +#175634 = VECTOR('',#175635,1.); +#175635 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#175636 = ORIENTED_EDGE('',*,*,#175637,.T.); +#175637 = EDGE_CURVE('',#175630,#175638,#175640,.T.); +#175638 = VERTEX_POINT('',#175639); +#175639 = CARTESIAN_POINT('',(99.601825,-97.055713,1.585)); +#175640 = CIRCLE('',#175641,7.499993690112E-02); +#175641 = AXIS2_PLACEMENT_3D('',#175642,#175643,#175644); +#175642 = CARTESIAN_POINT('',(99.548792248309,-97.00267982374,1.585)); +#175643 = DIRECTION('',(0.,0.,-1.)); +#175644 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#175645 = ORIENTED_EDGE('',*,*,#175646,.T.); +#175646 = EDGE_CURVE('',#175638,#175647,#175649,.T.); +#175647 = VERTEX_POINT('',#175648); +#175648 = CARTESIAN_POINT('',(99.538315,-97.115457,1.585)); +#175649 = LINE('',#175650,#175651); +#175650 = CARTESIAN_POINT('',(99.601825,-97.055713,1.585)); +#175651 = VECTOR('',#175652,1.); +#175652 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#175653 = ORIENTED_EDGE('',*,*,#175654,.T.); +#175654 = EDGE_CURVE('',#175647,#175655,#175657,.T.); +#175655 = VERTEX_POINT('',#175656); +#175656 = CARTESIAN_POINT('',(99.078553,-97.112661,1.585)); +#175657 = CIRCLE('',#175658,0.461067828848); +#175658 = AXIS2_PLACEMENT_3D('',#175659,#175660,#175661); +#175659 = CARTESIAN_POINT('',(99.310864512688,-96.71439613352,1.585)); +#175660 = DIRECTION('',(-0.,0.,-1.)); +#175661 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#175662 = ORIENTED_EDGE('',*,*,#175663,.T.); +#175663 = EDGE_CURVE('',#175655,#175664,#175666,.T.); +#175664 = VERTEX_POINT('',#175665); +#175665 = CARTESIAN_POINT('',(98.961864,-96.994898,1.585)); +#175666 = LINE('',#175667,#175668); +#175667 = CARTESIAN_POINT('',(99.078553,-97.112661,1.585)); +#175668 = VECTOR('',#175669,1.); +#175669 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#175670 = ORIENTED_EDGE('',*,*,#175671,.T.); +#175671 = EDGE_CURVE('',#175664,#175672,#175674,.T.); +#175672 = VERTEX_POINT('',#175673); +#175673 = CARTESIAN_POINT('',(98.904603,-96.878013,1.585)); +#175674 = LINE('',#175675,#175676); +#175675 = CARTESIAN_POINT('',(98.961864,-96.994898,1.585)); +#175676 = VECTOR('',#175677,1.); +#175677 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#175678 = ORIENTED_EDGE('',*,*,#175679,.T.); +#175679 = EDGE_CURVE('',#175672,#175680,#175682,.T.); +#175680 = VERTEX_POINT('',#175681); +#175681 = CARTESIAN_POINT('',(98.854745,-96.669347,1.585)); +#175682 = LINE('',#175683,#175684); +#175683 = CARTESIAN_POINT('',(98.904603,-96.878013,1.585)); +#175684 = VECTOR('',#175685,1.); +#175685 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#175686 = ORIENTED_EDGE('',*,*,#175687,.T.); +#175687 = EDGE_CURVE('',#175680,#175688,#175690,.T.); +#175688 = VERTEX_POINT('',#175689); +#175689 = CARTESIAN_POINT('',(98.856984,-96.5083,1.585)); +#175690 = LINE('',#175691,#175692); +#175691 = CARTESIAN_POINT('',(98.854745,-96.669347,1.585)); +#175692 = VECTOR('',#175693,1.); +#175693 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#175694 = ORIENTED_EDGE('',*,*,#175695,.T.); +#175695 = EDGE_CURVE('',#175688,#175696,#175698,.T.); +#175696 = VERTEX_POINT('',#175697); +#175697 = CARTESIAN_POINT('',(98.910282,-96.302473,1.585)); +#175698 = LINE('',#175699,#175700); +#175699 = CARTESIAN_POINT('',(98.856984,-96.5083,1.585)); +#175700 = VECTOR('',#175701,1.); +#175701 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#175702 = ORIENTED_EDGE('',*,*,#175703,.T.); +#175703 = EDGE_CURVE('',#175696,#175704,#175706,.T.); +#175704 = VERTEX_POINT('',#175705); +#175705 = CARTESIAN_POINT('',(98.967231,-96.193492,1.585)); +#175706 = LINE('',#175707,#175708); +#175707 = CARTESIAN_POINT('',(98.910282,-96.302473,1.585)); +#175708 = VECTOR('',#175709,1.); +#175709 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#175710 = ORIENTED_EDGE('',*,*,#175711,.T.); +#175711 = EDGE_CURVE('',#175704,#175535,#175712,.T.); +#175712 = LINE('',#175713,#175714); +#175713 = CARTESIAN_POINT('',(98.967231,-96.193492,1.585)); +#175714 = VECTOR('',#175715,1.); +#175715 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#175716 = PLANE('',#175717); +#175717 = AXIS2_PLACEMENT_3D('',#175718,#175719,#175720); +#175718 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175719 = DIRECTION('',(0.,0.,1.)); +#175720 = DIRECTION('',(1.,0.,-0.)); +#175721 = SHELL_BASED_SURFACE_MODEL('',(#175722)); +#175722 = OPEN_SHELL('',(#175723)); +#175723 = ADVANCED_FACE('',(#175724),#175910,.T.); +#175724 = FACE_BOUND('',#175725,.F.); +#175725 = EDGE_LOOP('',(#175726,#175737,#175745,#175754,#175762,#175770, + #175779,#175787,#175796,#175804,#175812,#175820,#175829,#175837, + #175846,#175854,#175863,#175871,#175879,#175887,#175896,#175904)); +#175726 = ORIENTED_EDGE('',*,*,#175727,.T.); +#175727 = EDGE_CURVE('',#175728,#175730,#175732,.T.); +#175728 = VERTEX_POINT('',#175729); +#175729 = CARTESIAN_POINT('',(99.867494,-96.171478,1.585)); +#175730 = VERTEX_POINT('',#175731); +#175731 = CARTESIAN_POINT('',(99.882126,-96.022919,1.585)); +#175732 = CIRCLE('',#175733,7.500006711464E-02); +#175733 = AXIS2_PLACEMENT_3D('',#175734,#175735,#175736); +#175734 = CARTESIAN_POINT('',(99.882125932885,-96.09791906711,1.585)); +#175735 = DIRECTION('',(0.,0.,-1.)); +#175736 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#175737 = ORIENTED_EDGE('',*,*,#175738,.T.); +#175738 = EDGE_CURVE('',#175730,#175739,#175741,.T.); +#175739 = VERTEX_POINT('',#175740); +#175740 = CARTESIAN_POINT('',(100.508911,-96.023681,1.585)); +#175741 = LINE('',#175742,#175743); +#175742 = CARTESIAN_POINT('',(99.882126,-96.022919,1.585)); +#175743 = VECTOR('',#175744,1.); +#175744 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#175745 = ORIENTED_EDGE('',*,*,#175746,.T.); +#175746 = EDGE_CURVE('',#175739,#175747,#175749,.T.); +#175747 = VERTEX_POINT('',#175748); +#175748 = CARTESIAN_POINT('',(100.574732,-96.112551,1.585)); +#175749 = CIRCLE('',#175750,7.447391611624E-02); +#175750 = AXIS2_PLACEMENT_3D('',#175751,#175752,#175753); +#175751 = CARTESIAN_POINT('',(100.50173192664,-96.0978080874,1.585)); +#175752 = DIRECTION('',(0.,0.,-1.)); +#175753 = DIRECTION('',(9.639715124778E-02,0.995342950561,0.)); +#175754 = ORIENTED_EDGE('',*,*,#175755,.T.); +#175755 = EDGE_CURVE('',#175747,#175756,#175758,.T.); +#175756 = VERTEX_POINT('',#175757); +#175757 = CARTESIAN_POINT('',(100.557616,-96.147307,1.585)); +#175758 = LINE('',#175759,#175760); +#175759 = CARTESIAN_POINT('',(100.574732,-96.112551,1.585)); +#175760 = VECTOR('',#175761,1.); +#175761 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#175762 = ORIENTED_EDGE('',*,*,#175763,.T.); +#175763 = EDGE_CURVE('',#175756,#175764,#175766,.T.); +#175764 = VERTEX_POINT('',#175765); +#175765 = CARTESIAN_POINT('',(100.33072,-96.406616,1.585)); +#175766 = LINE('',#175767,#175768); +#175767 = CARTESIAN_POINT('',(100.557616,-96.147307,1.585)); +#175768 = VECTOR('',#175769,1.); +#175769 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#175770 = ORIENTED_EDGE('',*,*,#175771,.T.); +#175771 = EDGE_CURVE('',#175764,#175772,#175774,.T.); +#175772 = VERTEX_POINT('',#175773); +#175773 = CARTESIAN_POINT('',(100.574732,-96.654715,1.585)); +#175774 = CIRCLE('',#175775,0.348520834816); +#175775 = AXIS2_PLACEMENT_3D('',#175776,#175777,#175778); +#175776 = CARTESIAN_POINT('',(100.2374266174,-96.74241819931,1.585)); +#175777 = DIRECTION('',(0.,0.,-1.)); +#175778 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#175779 = ORIENTED_EDGE('',*,*,#175780,.T.); +#175780 = EDGE_CURVE('',#175772,#175781,#175783,.T.); +#175781 = VERTEX_POINT('',#175782); +#175782 = CARTESIAN_POINT('',(100.57351,-96.927252,1.585)); +#175783 = LINE('',#175784,#175785); +#175784 = CARTESIAN_POINT('',(100.574732,-96.654715,1.585)); +#175785 = VECTOR('',#175786,1.); +#175786 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#175787 = ORIENTED_EDGE('',*,*,#175788,.T.); +#175788 = EDGE_CURVE('',#175781,#175789,#175791,.T.); +#175789 = VERTEX_POINT('',#175790); +#175790 = CARTESIAN_POINT('',(100.325329,-97.171478,1.585)); +#175791 = CIRCLE('',#175792,0.348635327447); +#175792 = AXIS2_PLACEMENT_3D('',#175793,#175794,#175795); +#175793 = CARTESIAN_POINT('',(100.23755748129,-96.83407208415,1.585)); +#175794 = DIRECTION('',(0.,0.,-1.)); +#175795 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#175796 = ORIENTED_EDGE('',*,*,#175797,.T.); +#175797 = EDGE_CURVE('',#175789,#175798,#175800,.T.); +#175798 = VERTEX_POINT('',#175799); +#175799 = CARTESIAN_POINT('',(100.005173,-97.170256,1.585)); +#175800 = LINE('',#175801,#175802); +#175801 = CARTESIAN_POINT('',(100.325329,-97.171478,1.585)); +#175802 = VECTOR('',#175803,1.); +#175803 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#175804 = ORIENTED_EDGE('',*,*,#175805,.T.); +#175805 = EDGE_CURVE('',#175798,#175806,#175808,.T.); +#175806 = VERTEX_POINT('',#175807); +#175807 = CARTESIAN_POINT('',(99.88246,-97.10805,1.585)); +#175808 = LINE('',#175809,#175810); +#175809 = CARTESIAN_POINT('',(100.005173,-97.170256,1.585)); +#175810 = VECTOR('',#175811,1.); +#175811 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#175812 = ORIENTED_EDGE('',*,*,#175813,.T.); +#175813 = EDGE_CURVE('',#175806,#175814,#175816,.T.); +#175814 = VERTEX_POINT('',#175815); +#175815 = CARTESIAN_POINT('',(99.819765,-97.044347,1.585)); +#175816 = LINE('',#175817,#175818); +#175817 = CARTESIAN_POINT('',(99.88246,-97.10805,1.585)); +#175818 = VECTOR('',#175819,1.); +#175819 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#175820 = ORIENTED_EDGE('',*,*,#175821,.T.); +#175821 = EDGE_CURVE('',#175814,#175822,#175824,.T.); +#175822 = VERTEX_POINT('',#175823); +#175823 = CARTESIAN_POINT('',(99.93516,-96.949648,1.585)); +#175824 = CIRCLE('',#175825,7.50001266804E-02); +#175825 = AXIS2_PLACEMENT_3D('',#175826,#175827,#175828); +#175826 = CARTESIAN_POINT('',(99.882126051994,-97.00268024831,1.585)); +#175827 = DIRECTION('',(0.,0.,-1.)); +#175828 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#175829 = ORIENTED_EDGE('',*,*,#175830,.T.); +#175830 = EDGE_CURVE('',#175822,#175831,#175833,.T.); +#175831 = VERTEX_POINT('',#175832); +#175832 = CARTESIAN_POINT('',(99.974172,-96.988661,1.585)); +#175833 = LINE('',#175834,#175835); +#175834 = CARTESIAN_POINT('',(99.93516,-96.949648,1.585)); +#175835 = VECTOR('',#175836,1.); +#175836 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#175837 = ORIENTED_EDGE('',*,*,#175838,.T.); +#175838 = EDGE_CURVE('',#175831,#175839,#175841,.T.); +#175839 = VERTEX_POINT('',#175840); +#175840 = CARTESIAN_POINT('',(100.361507,-96.988661,1.585)); +#175841 = CIRCLE('',#175842,0.358502380266); +#175842 = AXIS2_PLACEMENT_3D('',#175843,#175844,#175845); +#175843 = CARTESIAN_POINT('',(100.1678395,-96.686971,1.585)); +#175844 = DIRECTION('',(0.,0.,1.)); +#175845 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#175846 = ORIENTED_EDGE('',*,*,#175847,.T.); +#175847 = EDGE_CURVE('',#175839,#175848,#175850,.T.); +#175848 = VERTEX_POINT('',#175849); +#175849 = CARTESIAN_POINT('',(100.391914,-96.958253,1.585)); +#175850 = LINE('',#175851,#175852); +#175851 = CARTESIAN_POINT('',(100.361507,-96.988661,1.585)); +#175852 = VECTOR('',#175853,1.); +#175853 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#175854 = ORIENTED_EDGE('',*,*,#175855,.T.); +#175855 = EDGE_CURVE('',#175848,#175856,#175858,.T.); +#175856 = VERTEX_POINT('',#175857); +#175857 = CARTESIAN_POINT('',(100.391915,-96.618536,1.585)); +#175858 = CIRCLE('',#175859,0.305616146029); +#175859 = AXIS2_PLACEMENT_3D('',#175860,#175861,#175862); +#175860 = CARTESIAN_POINT('',(100.13784892049,-96.78839375212,1.585)); +#175861 = DIRECTION('',(0.,-0.,1.)); +#175862 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#175863 = ORIENTED_EDGE('',*,*,#175864,.T.); +#175864 = EDGE_CURVE('',#175856,#175865,#175867,.T.); +#175865 = VERTEX_POINT('',#175866); +#175866 = CARTESIAN_POINT('',(100.361508,-96.588129,1.585)); +#175867 = LINE('',#175868,#175869); +#175868 = CARTESIAN_POINT('',(100.391915,-96.618536,1.585)); +#175869 = VECTOR('',#175870,1.); +#175870 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#175871 = ORIENTED_EDGE('',*,*,#175872,.T.); +#175872 = EDGE_CURVE('',#175865,#175873,#175875,.T.); +#175873 = VERTEX_POINT('',#175874); +#175874 = CARTESIAN_POINT('',(100.292992,-96.553871,1.585)); +#175875 = LINE('',#175876,#175877); +#175876 = CARTESIAN_POINT('',(100.361508,-96.588129,1.585)); +#175877 = VECTOR('',#175878,1.); +#175878 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#175879 = ORIENTED_EDGE('',*,*,#175880,.T.); +#175880 = EDGE_CURVE('',#175873,#175881,#175883,.T.); +#175881 = VERTEX_POINT('',#175882); +#175882 = CARTESIAN_POINT('',(100.153208,-96.55243,1.585)); +#175883 = LINE('',#175884,#175885); +#175884 = CARTESIAN_POINT('',(100.292992,-96.553871,1.585)); +#175885 = VECTOR('',#175886,1.); +#175886 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#175887 = ORIENTED_EDGE('',*,*,#175888,.T.); +#175888 = EDGE_CURVE('',#175881,#175889,#175891,.T.); +#175889 = VERTEX_POINT('',#175890); +#175890 = CARTESIAN_POINT('',(100.111397,-96.429483,1.585)); +#175891 = CIRCLE('',#175892,7.500015628755E-02); +#175892 = AXIS2_PLACEMENT_3D('',#175893,#175894,#175895); +#175893 = CARTESIAN_POINT('',(100.16784028432,-96.4788710461,1.585)); +#175894 = DIRECTION('',(0.,0.,-1.)); +#175895 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#175896 = ORIENTED_EDGE('',*,*,#175897,.T.); +#175897 = EDGE_CURVE('',#175889,#175898,#175900,.T.); +#175898 = VERTEX_POINT('',#175899); +#175899 = CARTESIAN_POINT('',(100.335891,-96.172919,1.585)); +#175900 = LINE('',#175901,#175902); +#175901 = CARTESIAN_POINT('',(100.111397,-96.429483,1.585)); +#175902 = VECTOR('',#175903,1.); +#175903 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#175904 = ORIENTED_EDGE('',*,*,#175905,.T.); +#175905 = EDGE_CURVE('',#175898,#175728,#175906,.T.); +#175906 = LINE('',#175907,#175908); +#175907 = CARTESIAN_POINT('',(100.335891,-96.172919,1.585)); +#175908 = VECTOR('',#175909,1.); +#175909 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#175910 = PLANE('',#175911); +#175911 = AXIS2_PLACEMENT_3D('',#175912,#175913,#175914); +#175912 = CARTESIAN_POINT('',(0.,0.,1.585)); +#175913 = DIRECTION('',(0.,0.,1.)); +#175914 = DIRECTION('',(1.,0.,-0.)); +#175915 = SHELL_BASED_SURFACE_MODEL('',(#175916)); +#175916 = OPEN_SHELL('',(#175917)); +#175917 = ADVANCED_FACE('',(#175918,#176020),#176122,.T.); +#175918 = FACE_BOUND('',#175919,.F.); +#175919 = EDGE_LOOP('',(#175920,#175931,#175939,#175947,#175956,#175964, + #175972,#175981,#175989,#175997,#176006,#176014)); +#175920 = ORIENTED_EDGE('',*,*,#175921,.T.); +#175921 = EDGE_CURVE('',#175922,#175924,#175926,.T.); +#175922 = VERTEX_POINT('',#175923); +#175923 = CARTESIAN_POINT('',(100.985142,-96.08242,1.585)); +#175924 = VERTEX_POINT('',#175925); +#175925 = CARTESIAN_POINT('',(101.35798,-96.087786,1.585)); +#175926 = CIRCLE('',#175927,0.291788488016); +#175927 = AXIS2_PLACEMENT_3D('',#175928,#175929,#175930); +#175928 = CARTESIAN_POINT('',(101.16833086911,-96.30953750256,1.585)); +#175929 = DIRECTION('',(0.,0.,-1.)); +#175930 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#175931 = ORIENTED_EDGE('',*,*,#175932,.T.); +#175932 = EDGE_CURVE('',#175924,#175933,#175935,.T.); +#175933 = VERTEX_POINT('',#175934); +#175934 = CARTESIAN_POINT('',(101.421433,-96.153316,1.585)); +#175935 = LINE('',#175936,#175937); +#175936 = CARTESIAN_POINT('',(101.35798,-96.087786,1.585)); +#175937 = VECTOR('',#175938,1.); +#175938 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#175939 = ORIENTED_EDGE('',*,*,#175940,.T.); +#175940 = EDGE_CURVE('',#175933,#175941,#175943,.T.); +#175941 = VERTEX_POINT('',#175942); +#175942 = CARTESIAN_POINT('',(101.478696,-96.270205,1.585)); +#175943 = LINE('',#175944,#175945); +#175944 = CARTESIAN_POINT('',(101.421433,-96.153316,1.585)); +#175945 = VECTOR('',#175946,1.); +#175946 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#175947 = ORIENTED_EDGE('',*,*,#175948,.T.); +#175948 = EDGE_CURVE('',#175941,#175949,#175951,.T.); +#175949 = VERTEX_POINT('',#175950); +#175950 = CARTESIAN_POINT('',(101.473017,-96.940983,1.585)); +#175951 = CIRCLE('',#175952,0.967158496826); +#175952 = AXIS2_PLACEMENT_3D('',#175953,#175954,#175955); +#175953 = CARTESIAN_POINT('',(100.56874970686,-96.59791417228,1.585)); +#175954 = DIRECTION('',(0.,0.,-1.)); +#175955 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#175956 = ORIENTED_EDGE('',*,*,#175957,.T.); +#175957 = EDGE_CURVE('',#175949,#175958,#175960,.T.); +#175958 = VERTEX_POINT('',#175959); +#175959 = CARTESIAN_POINT('',(101.416067,-97.049963,1.585)); +#175960 = LINE('',#175961,#175962); +#175961 = CARTESIAN_POINT('',(101.473017,-96.940983,1.585)); +#175962 = VECTOR('',#175963,1.); +#175963 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#175964 = ORIENTED_EDGE('',*,*,#175965,.T.); +#175965 = EDGE_CURVE('',#175958,#175966,#175968,.T.); +#175966 = VERTEX_POINT('',#175967); +#175967 = CARTESIAN_POINT('',(101.350537,-97.113417,1.585)); +#175968 = LINE('',#175969,#175970); +#175969 = CARTESIAN_POINT('',(101.416067,-97.049963,1.585)); +#175970 = VECTOR('',#175971,1.); +#175971 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#175972 = ORIENTED_EDGE('',*,*,#175973,.T.); +#175973 = EDGE_CURVE('',#175966,#175974,#175976,.T.); +#175974 = VERTEX_POINT('',#175975); +#175975 = CARTESIAN_POINT('',(100.977698,-97.10805,1.585)); +#175976 = CIRCLE('',#175977,0.290998264264); +#175977 = AXIS2_PLACEMENT_3D('',#175978,#175979,#175980); +#175978 = CARTESIAN_POINT('',(101.16733341815,-96.88732755441,1.585)); +#175979 = DIRECTION('',(-0.,0.,-1.)); +#175980 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#175981 = ORIENTED_EDGE('',*,*,#175982,.T.); +#175982 = EDGE_CURVE('',#175974,#175983,#175985,.T.); +#175983 = VERTEX_POINT('',#175984); +#175984 = CARTESIAN_POINT('',(100.914245,-97.042517,1.585)); +#175985 = LINE('',#175986,#175987); +#175986 = CARTESIAN_POINT('',(100.977698,-97.10805,1.585)); +#175987 = VECTOR('',#175988,1.); +#175988 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#175989 = ORIENTED_EDGE('',*,*,#175990,.T.); +#175990 = EDGE_CURVE('',#175983,#175991,#175993,.T.); +#175991 = VERTEX_POINT('',#175992); +#175992 = CARTESIAN_POINT('',(100.856984,-96.925632,1.585)); +#175993 = LINE('',#175994,#175995); +#175994 = CARTESIAN_POINT('',(100.914245,-97.042517,1.585)); +#175995 = VECTOR('',#175996,1.); +#175996 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#175997 = ORIENTED_EDGE('',*,*,#175998,.T.); +#175998 = EDGE_CURVE('',#175991,#175999,#176001,.T.); +#175999 = VERTEX_POINT('',#176000); +#176000 = CARTESIAN_POINT('',(100.862663,-96.254854,1.585)); +#176001 = CIRCLE('',#176002,0.967158496826); +#176002 = AXIS2_PLACEMENT_3D('',#176003,#176004,#176005); +#176003 = CARTESIAN_POINT('',(101.76693029313,-96.59792282772,1.585)); +#176004 = DIRECTION('',(0.,0.,-1.)); +#176005 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#176006 = ORIENTED_EDGE('',*,*,#176007,.T.); +#176007 = EDGE_CURVE('',#175999,#176008,#176010,.T.); +#176008 = VERTEX_POINT('',#176009); +#176009 = CARTESIAN_POINT('',(100.919612,-96.145873,1.585)); +#176010 = LINE('',#176011,#176012); +#176011 = CARTESIAN_POINT('',(100.862663,-96.254854,1.585)); +#176012 = VECTOR('',#176013,1.); +#176013 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#176014 = ORIENTED_EDGE('',*,*,#176015,.T.); +#176015 = EDGE_CURVE('',#176008,#175922,#176016,.T.); +#176016 = LINE('',#176017,#176018); +#176017 = CARTESIAN_POINT('',(100.919612,-96.145873,1.585)); +#176018 = VECTOR('',#176019,1.); +#176019 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#176020 = FACE_BOUND('',#176021,.F.); +#176021 = EDGE_LOOP('',(#176022,#176033,#176041,#176049,#176058,#176066, + #176074,#176083,#176091,#176099,#176108,#176116)); +#176022 = ORIENTED_EDGE('',*,*,#176023,.T.); +#176023 = EDGE_CURVE('',#176024,#176026,#176028,.T.); +#176024 = VERTEX_POINT('',#176025); +#176025 = CARTESIAN_POINT('',(101.26627,-96.207177,1.585)); +#176026 = VERTEX_POINT('',#176027); +#176027 = CARTESIAN_POINT('',(101.06941,-96.207177,1.585)); +#176028 = CIRCLE('',#176029,0.148516804184); +#176029 = AXIS2_PLACEMENT_3D('',#176030,#176031,#176032); +#176030 = CARTESIAN_POINT('',(101.16784,-96.318392,1.585)); +#176031 = DIRECTION('',(0.,0.,1.)); +#176032 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#176033 = ORIENTED_EDGE('',*,*,#176034,.T.); +#176034 = EDGE_CURVE('',#176026,#176035,#176037,.T.); +#176035 = VERTEX_POINT('',#176036); +#176036 = CARTESIAN_POINT('',(101.039003,-96.237584,1.585)); +#176037 = LINE('',#176038,#176039); +#176038 = CARTESIAN_POINT('',(101.06941,-96.207177,1.585)); +#176039 = VECTOR('',#176040,1.); +#176040 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#176041 = ORIENTED_EDGE('',*,*,#176042,.T.); +#176042 = EDGE_CURVE('',#176035,#176043,#176045,.T.); +#176043 = VERTEX_POINT('',#176044); +#176044 = CARTESIAN_POINT('',(101.000509,-96.314571,1.585)); +#176045 = LINE('',#176046,#176047); +#176046 = CARTESIAN_POINT('',(101.039003,-96.237584,1.585)); +#176047 = VECTOR('',#176048,1.); +#176048 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#176049 = ORIENTED_EDGE('',*,*,#176050,.T.); +#176050 = EDGE_CURVE('',#176043,#176051,#176053,.T.); +#176051 = VERTEX_POINT('',#176052); +#176052 = CARTESIAN_POINT('',(101.000509,-96.881266,1.585)); +#176053 = CIRCLE('',#176054,0.815450468384); +#176054 = AXIS2_PLACEMENT_3D('',#176055,#176056,#176057); +#176055 = CARTESIAN_POINT('',(101.76514856255,-96.5979185,1.585)); +#176056 = DIRECTION('',(0.,0.,1.)); +#176057 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#176058 = ORIENTED_EDGE('',*,*,#176059,.T.); +#176059 = EDGE_CURVE('',#176051,#176060,#176062,.T.); +#176060 = VERTEX_POINT('',#176061); +#176061 = CARTESIAN_POINT('',(101.039003,-96.958253,1.585)); +#176062 = LINE('',#176063,#176064); +#176063 = CARTESIAN_POINT('',(101.000509,-96.881266,1.585)); +#176064 = VECTOR('',#176065,1.); +#176065 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#176066 = ORIENTED_EDGE('',*,*,#176067,.T.); +#176067 = EDGE_CURVE('',#176060,#176068,#176070,.T.); +#176068 = VERTEX_POINT('',#176069); +#176069 = CARTESIAN_POINT('',(101.06941,-96.988661,1.585)); +#176070 = LINE('',#176071,#176072); +#176071 = CARTESIAN_POINT('',(101.039003,-96.958253,1.585)); +#176072 = VECTOR('',#176073,1.); +#176073 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#176074 = ORIENTED_EDGE('',*,*,#176075,.T.); +#176075 = EDGE_CURVE('',#176068,#176076,#176078,.T.); +#176076 = VERTEX_POINT('',#176077); +#176077 = CARTESIAN_POINT('',(101.266269,-96.988661,1.585)); +#176078 = CIRCLE('',#176079,0.14851572397); +#176079 = AXIS2_PLACEMENT_3D('',#176080,#176081,#176082); +#176080 = CARTESIAN_POINT('',(101.1678395,-96.877447,1.585)); +#176081 = DIRECTION('',(0.,0.,1.)); +#176082 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#176083 = ORIENTED_EDGE('',*,*,#176084,.T.); +#176084 = EDGE_CURVE('',#176076,#176085,#176087,.T.); +#176085 = VERTEX_POINT('',#176086); +#176086 = CARTESIAN_POINT('',(101.296676,-96.958253,1.585)); +#176087 = LINE('',#176088,#176089); +#176088 = CARTESIAN_POINT('',(101.266269,-96.988661,1.585)); +#176089 = VECTOR('',#176090,1.); +#176090 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#176091 = ORIENTED_EDGE('',*,*,#176092,.T.); +#176092 = EDGE_CURVE('',#176085,#176093,#176095,.T.); +#176093 = VERTEX_POINT('',#176094); +#176094 = CARTESIAN_POINT('',(101.33517,-96.881266,1.585)); +#176095 = LINE('',#176096,#176097); +#176096 = CARTESIAN_POINT('',(101.296676,-96.958253,1.585)); +#176097 = VECTOR('',#176098,1.); +#176098 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#176099 = ORIENTED_EDGE('',*,*,#176100,.T.); +#176100 = EDGE_CURVE('',#176093,#176101,#176103,.T.); +#176101 = VERTEX_POINT('',#176102); +#176102 = CARTESIAN_POINT('',(101.33517,-96.314571,1.585)); +#176103 = CIRCLE('',#176104,0.815433004022); +#176104 = AXIS2_PLACEMENT_3D('',#176105,#176106,#176107); +#176105 = CARTESIAN_POINT('',(100.57054906235,-96.5979185,1.585)); +#176106 = DIRECTION('',(0.,-0.,1.)); +#176107 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#176108 = ORIENTED_EDGE('',*,*,#176109,.T.); +#176109 = EDGE_CURVE('',#176101,#176110,#176112,.T.); +#176110 = VERTEX_POINT('',#176111); +#176111 = CARTESIAN_POINT('',(101.296677,-96.237584,1.585)); +#176112 = LINE('',#176113,#176114); +#176113 = CARTESIAN_POINT('',(101.33517,-96.314571,1.585)); +#176114 = VECTOR('',#176115,1.); +#176115 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#176116 = ORIENTED_EDGE('',*,*,#176117,.T.); +#176117 = EDGE_CURVE('',#176110,#176024,#176118,.T.); +#176118 = LINE('',#176119,#176120); +#176119 = CARTESIAN_POINT('',(101.296677,-96.237584,1.585)); +#176120 = VECTOR('',#176121,1.); +#176121 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176122 = PLANE('',#176123); +#176123 = AXIS2_PLACEMENT_3D('',#176124,#176125,#176126); +#176124 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176125 = DIRECTION('',(0.,0.,1.)); +#176126 = DIRECTION('',(1.,0.,-0.)); +#176127 = SHELL_BASED_SURFACE_MODEL('',(#176128)); +#176128 = OPEN_SHELL('',(#176129)); +#176129 = ADVANCED_FACE('',(#176130),#176166,.T.); +#176130 = FACE_BOUND('',#176131,.F.); +#176131 = EDGE_LOOP('',(#176132,#176143,#176151,#176160)); +#176132 = ORIENTED_EDGE('',*,*,#176133,.T.); +#176133 = EDGE_CURVE('',#176134,#176136,#176138,.T.); +#176134 = VERTEX_POINT('',#176135); +#176135 = CARTESIAN_POINT('',(129.930398,-97.1181,1.585)); +#176136 = VERTEX_POINT('',#176137); +#176137 = CARTESIAN_POINT('',(129.930398,-96.9981,1.585)); +#176138 = CIRCLE('',#176139,6.000000000042E-02); +#176139 = AXIS2_PLACEMENT_3D('',#176140,#176141,#176142); +#176140 = CARTESIAN_POINT('',(129.93039777441,-97.0581,1.585)); +#176141 = DIRECTION('',(0.,0.,-1.)); +#176142 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#176143 = ORIENTED_EDGE('',*,*,#176144,.T.); +#176144 = EDGE_CURVE('',#176136,#176145,#176147,.T.); +#176145 = VERTEX_POINT('',#176146); +#176146 = CARTESIAN_POINT('',(130.452902,-96.9981,1.585)); +#176147 = LINE('',#176148,#176149); +#176148 = CARTESIAN_POINT('',(129.930398,-96.9981,1.585)); +#176149 = VECTOR('',#176150,1.); +#176150 = DIRECTION('',(1.,0.,0.)); +#176151 = ORIENTED_EDGE('',*,*,#176152,.T.); +#176152 = EDGE_CURVE('',#176145,#176153,#176155,.T.); +#176153 = VERTEX_POINT('',#176154); +#176154 = CARTESIAN_POINT('',(130.452902,-97.1181,1.585)); +#176155 = CIRCLE('',#176156,6.000000000043E-02); +#176156 = AXIS2_PLACEMENT_3D('',#176157,#176158,#176159); +#176157 = CARTESIAN_POINT('',(130.45290222558,-97.0581,1.585)); +#176158 = DIRECTION('',(0.,0.,-1.)); +#176159 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#176160 = ORIENTED_EDGE('',*,*,#176161,.T.); +#176161 = EDGE_CURVE('',#176153,#176134,#176162,.T.); +#176162 = LINE('',#176163,#176164); +#176163 = CARTESIAN_POINT('',(130.452902,-97.1181,1.585)); +#176164 = VECTOR('',#176165,1.); +#176165 = DIRECTION('',(-1.,0.,0.)); +#176166 = PLANE('',#176167); +#176167 = AXIS2_PLACEMENT_3D('',#176168,#176169,#176170); +#176168 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176169 = DIRECTION('',(0.,0.,1.)); +#176170 = DIRECTION('',(1.,0.,-0.)); +#176171 = SHELL_BASED_SURFACE_MODEL('',(#176172)); +#176172 = OPEN_SHELL('',(#176173)); +#176173 = ADVANCED_FACE('',(#176174),#176243,.T.); +#176174 = FACE_BOUND('',#176175,.F.); +#176175 = EDGE_LOOP('',(#176176,#176187,#176195,#176203,#176212,#176220, + #176229,#176237)); +#176176 = ORIENTED_EDGE('',*,*,#176177,.T.); +#176177 = EDGE_CURVE('',#176178,#176180,#176182,.T.); +#176178 = VERTEX_POINT('',#176179); +#176179 = CARTESIAN_POINT('',(119.576217,-96.185139,1.585)); +#176180 = VERTEX_POINT('',#176181); +#176181 = CARTESIAN_POINT('',(119.69165,-96.2081,1.585)); +#176182 = CIRCLE('',#176183,6.000007318647E-02); +#176183 = AXIS2_PLACEMENT_3D('',#176184,#176185,#176186); +#176184 = CARTESIAN_POINT('',(119.63164992681,-96.20809982331,1.585)); +#176185 = DIRECTION('',(0.,0.,-1.)); +#176186 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176187 = ORIENTED_EDGE('',*,*,#176188,.T.); +#176188 = EDGE_CURVE('',#176180,#176189,#176191,.T.); +#176189 = VERTEX_POINT('',#176190); +#176190 = CARTESIAN_POINT('',(119.69165,-96.8731,1.585)); +#176191 = LINE('',#176192,#176193); +#176192 = CARTESIAN_POINT('',(119.69165,-96.2081,1.585)); +#176193 = VECTOR('',#176194,1.); +#176194 = DIRECTION('',(0.,-1.,0.)); +#176195 = ORIENTED_EDGE('',*,*,#176196,.T.); +#176196 = EDGE_CURVE('',#176189,#176197,#176199,.T.); +#176197 = VERTEX_POINT('',#176198); +#176198 = CARTESIAN_POINT('',(120.35665,-96.8731,1.585)); +#176199 = LINE('',#176200,#176201); +#176200 = CARTESIAN_POINT('',(119.69165,-96.8731,1.585)); +#176201 = VECTOR('',#176202,1.); +#176202 = DIRECTION('',(1.,0.,0.)); +#176203 = ORIENTED_EDGE('',*,*,#176204,.T.); +#176204 = EDGE_CURVE('',#176197,#176205,#176207,.T.); +#176205 = VERTEX_POINT('',#176206); +#176206 = CARTESIAN_POINT('',(120.35665,-96.9931,1.585)); +#176207 = CIRCLE('',#176208,6.000000000042E-02); +#176208 = AXIS2_PLACEMENT_3D('',#176209,#176210,#176211); +#176209 = CARTESIAN_POINT('',(120.35665022558,-96.9331,1.585)); +#176210 = DIRECTION('',(0.,0.,-1.)); +#176211 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#176212 = ORIENTED_EDGE('',*,*,#176213,.T.); +#176213 = EDGE_CURVE('',#176205,#176214,#176216,.T.); +#176214 = VERTEX_POINT('',#176215); +#176215 = CARTESIAN_POINT('',(119.63165,-96.9931,1.585)); +#176216 = LINE('',#176217,#176218); +#176217 = CARTESIAN_POINT('',(120.35665,-96.9931,1.585)); +#176218 = VECTOR('',#176219,1.); +#176219 = DIRECTION('',(-1.,0.,0.)); +#176220 = ORIENTED_EDGE('',*,*,#176221,.T.); +#176221 = EDGE_CURVE('',#176214,#176222,#176224,.T.); +#176222 = VERTEX_POINT('',#176223); +#176223 = CARTESIAN_POINT('',(119.57165,-96.9331,1.585)); +#176224 = CIRCLE('',#176225,5.999932016258E-02); +#176225 = AXIS2_PLACEMENT_3D('',#176226,#176227,#176228); +#176226 = CARTESIAN_POINT('',(119.63164932015,-96.93310067984,1.585)); +#176227 = DIRECTION('',(0.,0.,-1.)); +#176228 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#176229 = ORIENTED_EDGE('',*,*,#176230,.T.); +#176230 = EDGE_CURVE('',#176222,#176231,#176233,.T.); +#176231 = VERTEX_POINT('',#176232); +#176232 = CARTESIAN_POINT('',(119.57165,-96.2081,1.585)); +#176233 = LINE('',#176234,#176235); +#176234 = CARTESIAN_POINT('',(119.57165,-96.9331,1.585)); +#176235 = VECTOR('',#176236,1.); +#176236 = DIRECTION('',(0.,1.,0.)); +#176237 = ORIENTED_EDGE('',*,*,#176238,.T.); +#176238 = EDGE_CURVE('',#176231,#176178,#176239,.T.); +#176239 = LINE('',#176240,#176241); +#176240 = CARTESIAN_POINT('',(119.57165,-96.2081,1.585)); +#176241 = VECTOR('',#176242,1.); +#176242 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176243 = PLANE('',#176244); +#176244 = AXIS2_PLACEMENT_3D('',#176245,#176246,#176247); +#176245 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176246 = DIRECTION('',(0.,0.,1.)); +#176247 = DIRECTION('',(1.,0.,-0.)); +#176248 = SHELL_BASED_SURFACE_MODEL('',(#176249)); +#176249 = OPEN_SHELL('',(#176250)); +#176250 = ADVANCED_FACE('',(#176251),#176320,.T.); +#176251 = FACE_BOUND('',#176252,.F.); +#176252 = EDGE_LOOP('',(#176253,#176264,#176272,#176281,#176289,#176298, + #176306,#176314)); +#176253 = ORIENTED_EDGE('',*,*,#176254,.T.); +#176254 = EDGE_CURVE('',#176255,#176257,#176259,.T.); +#176255 = VERTEX_POINT('',#176256); +#176256 = CARTESIAN_POINT('',(123.796217,-96.185139,1.585)); +#176257 = VERTEX_POINT('',#176258); +#176258 = CARTESIAN_POINT('',(123.91165,-96.2081,1.585)); +#176259 = CIRCLE('',#176260,6.000007318647E-02); +#176260 = AXIS2_PLACEMENT_3D('',#176261,#176262,#176263); +#176261 = CARTESIAN_POINT('',(123.85164992681,-96.20809982331,1.585)); +#176262 = DIRECTION('',(0.,0.,-1.)); +#176263 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176264 = ORIENTED_EDGE('',*,*,#176265,.T.); +#176265 = EDGE_CURVE('',#176257,#176266,#176268,.T.); +#176266 = VERTEX_POINT('',#176267); +#176267 = CARTESIAN_POINT('',(123.91165,-96.9331,1.585)); +#176268 = LINE('',#176269,#176270); +#176269 = CARTESIAN_POINT('',(123.91165,-96.2081,1.585)); +#176270 = VECTOR('',#176271,1.); +#176271 = DIRECTION('',(0.,-1.,0.)); +#176272 = ORIENTED_EDGE('',*,*,#176273,.T.); +#176273 = EDGE_CURVE('',#176266,#176274,#176276,.T.); +#176274 = VERTEX_POINT('',#176275); +#176275 = CARTESIAN_POINT('',(123.85165,-96.9931,1.585)); +#176276 = CIRCLE('',#176277,5.999932016258E-02); +#176277 = AXIS2_PLACEMENT_3D('',#176278,#176279,#176280); +#176278 = CARTESIAN_POINT('',(123.85165067984,-96.93310067984,1.585)); +#176279 = DIRECTION('',(0.,0.,-1.)); +#176280 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#176281 = ORIENTED_EDGE('',*,*,#176282,.T.); +#176282 = EDGE_CURVE('',#176274,#176283,#176285,.T.); +#176283 = VERTEX_POINT('',#176284); +#176284 = CARTESIAN_POINT('',(123.12665,-96.9931,1.585)); +#176285 = LINE('',#176286,#176287); +#176286 = CARTESIAN_POINT('',(123.85165,-96.9931,1.585)); +#176287 = VECTOR('',#176288,1.); +#176288 = DIRECTION('',(-1.,0.,0.)); +#176289 = ORIENTED_EDGE('',*,*,#176290,.T.); +#176290 = EDGE_CURVE('',#176283,#176291,#176293,.T.); +#176291 = VERTEX_POINT('',#176292); +#176292 = CARTESIAN_POINT('',(123.12665,-96.8731,1.585)); +#176293 = CIRCLE('',#176294,6.000000000043E-02); +#176294 = AXIS2_PLACEMENT_3D('',#176295,#176296,#176297); +#176295 = CARTESIAN_POINT('',(123.12664977441,-96.9331,1.585)); +#176296 = DIRECTION('',(0.,0.,-1.)); +#176297 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#176298 = ORIENTED_EDGE('',*,*,#176299,.T.); +#176299 = EDGE_CURVE('',#176291,#176300,#176302,.T.); +#176300 = VERTEX_POINT('',#176301); +#176301 = CARTESIAN_POINT('',(123.79165,-96.8731,1.585)); +#176302 = LINE('',#176303,#176304); +#176303 = CARTESIAN_POINT('',(123.12665,-96.8731,1.585)); +#176304 = VECTOR('',#176305,1.); +#176305 = DIRECTION('',(1.,0.,0.)); +#176306 = ORIENTED_EDGE('',*,*,#176307,.T.); +#176307 = EDGE_CURVE('',#176300,#176308,#176310,.T.); +#176308 = VERTEX_POINT('',#176309); +#176309 = CARTESIAN_POINT('',(123.79165,-96.2081,1.585)); +#176310 = LINE('',#176311,#176312); +#176311 = CARTESIAN_POINT('',(123.79165,-96.8731,1.585)); +#176312 = VECTOR('',#176313,1.); +#176313 = DIRECTION('',(0.,1.,0.)); +#176314 = ORIENTED_EDGE('',*,*,#176315,.T.); +#176315 = EDGE_CURVE('',#176308,#176255,#176316,.T.); +#176316 = LINE('',#176317,#176318); +#176317 = CARTESIAN_POINT('',(123.79165,-96.2081,1.585)); +#176318 = VECTOR('',#176319,1.); +#176319 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176320 = PLANE('',#176321); +#176321 = AXIS2_PLACEMENT_3D('',#176322,#176323,#176324); +#176322 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176323 = DIRECTION('',(0.,0.,1.)); +#176324 = DIRECTION('',(1.,0.,-0.)); +#176325 = SHELL_BASED_SURFACE_MODEL('',(#176326)); +#176326 = OPEN_SHELL('',(#176327)); +#176327 = ADVANCED_FACE('',(#176328),#176364,.T.); +#176328 = FACE_BOUND('',#176329,.F.); +#176329 = EDGE_LOOP('',(#176330,#176341,#176349,#176358)); +#176330 = ORIENTED_EDGE('',*,*,#176331,.T.); +#176331 = EDGE_CURVE('',#176332,#176334,#176336,.T.); +#176332 = VERTEX_POINT('',#176333); +#176333 = CARTESIAN_POINT('',(112.27607,-96.8731,1.585)); +#176334 = VERTEX_POINT('',#176335); +#176335 = CARTESIAN_POINT('',(112.27607,-96.7531,1.585)); +#176336 = CIRCLE('',#176337,6.000000000042E-02); +#176337 = AXIS2_PLACEMENT_3D('',#176338,#176339,#176340); +#176338 = CARTESIAN_POINT('',(112.27606977441,-96.8131,1.585)); +#176339 = DIRECTION('',(0.,0.,-1.)); +#176340 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#176341 = ORIENTED_EDGE('',*,*,#176342,.T.); +#176342 = EDGE_CURVE('',#176334,#176343,#176345,.T.); +#176343 = VERTEX_POINT('',#176344); +#176344 = CARTESIAN_POINT('',(112.55723,-96.7531,1.585)); +#176345 = LINE('',#176346,#176347); +#176346 = CARTESIAN_POINT('',(112.27607,-96.7531,1.585)); +#176347 = VECTOR('',#176348,1.); +#176348 = DIRECTION('',(1.,0.,0.)); +#176349 = ORIENTED_EDGE('',*,*,#176350,.T.); +#176350 = EDGE_CURVE('',#176343,#176351,#176353,.T.); +#176351 = VERTEX_POINT('',#176352); +#176352 = CARTESIAN_POINT('',(112.55723,-96.8731,1.585)); +#176353 = CIRCLE('',#176354,6.000000000042E-02); +#176354 = AXIS2_PLACEMENT_3D('',#176355,#176356,#176357); +#176355 = CARTESIAN_POINT('',(112.55723022558,-96.8131,1.585)); +#176356 = DIRECTION('',(0.,0.,-1.)); +#176357 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#176358 = ORIENTED_EDGE('',*,*,#176359,.T.); +#176359 = EDGE_CURVE('',#176351,#176332,#176360,.T.); +#176360 = LINE('',#176361,#176362); +#176361 = CARTESIAN_POINT('',(112.55723,-96.8731,1.585)); +#176362 = VECTOR('',#176363,1.); +#176363 = DIRECTION('',(-1.,0.,0.)); +#176364 = PLANE('',#176365); +#176365 = AXIS2_PLACEMENT_3D('',#176366,#176367,#176368); +#176366 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176367 = DIRECTION('',(0.,0.,1.)); +#176368 = DIRECTION('',(1.,0.,-0.)); +#176369 = SHELL_BASED_SURFACE_MODEL('',(#176370)); +#176370 = OPEN_SHELL('',(#176371)); +#176371 = ADVANCED_FACE('',(#176372),#176416,.T.); +#176372 = FACE_BOUND('',#176373,.F.); +#176373 = EDGE_LOOP('',(#176374,#176385,#176393,#176402,#176410)); +#176374 = ORIENTED_EDGE('',*,*,#176375,.T.); +#176375 = EDGE_CURVE('',#176376,#176378,#176380,.T.); +#176376 = VERTEX_POINT('',#176377); +#176377 = CARTESIAN_POINT('',(105.376217,-95.910139,1.585)); +#176378 = VERTEX_POINT('',#176379); +#176379 = CARTESIAN_POINT('',(105.49165,-95.9331,1.585)); +#176380 = CIRCLE('',#176381,6.000007318648E-02); +#176381 = AXIS2_PLACEMENT_3D('',#176382,#176383,#176384); +#176382 = CARTESIAN_POINT('',(105.43164992681,-95.93309982331,1.585)); +#176383 = DIRECTION('',(0.,0.,-1.)); +#176384 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176385 = ORIENTED_EDGE('',*,*,#176386,.T.); +#176386 = EDGE_CURVE('',#176378,#176387,#176389,.T.); +#176387 = VERTEX_POINT('',#176388); +#176388 = CARTESIAN_POINT('',(105.49165,-96.7131,1.585)); +#176389 = LINE('',#176390,#176391); +#176390 = CARTESIAN_POINT('',(105.49165,-95.9331,1.585)); +#176391 = VECTOR('',#176392,1.); +#176392 = DIRECTION('',(0.,-1.,0.)); +#176393 = ORIENTED_EDGE('',*,*,#176394,.T.); +#176394 = EDGE_CURVE('',#176387,#176395,#176397,.T.); +#176395 = VERTEX_POINT('',#176396); +#176396 = CARTESIAN_POINT('',(105.37165,-96.7131,1.585)); +#176397 = CIRCLE('',#176398,6.000000000043E-02); +#176398 = AXIS2_PLACEMENT_3D('',#176399,#176400,#176401); +#176399 = CARTESIAN_POINT('',(105.43165,-96.71310022558,1.585)); +#176400 = DIRECTION('',(0.,0.,-1.)); +#176401 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#176402 = ORIENTED_EDGE('',*,*,#176403,.T.); +#176403 = EDGE_CURVE('',#176395,#176404,#176406,.T.); +#176404 = VERTEX_POINT('',#176405); +#176405 = CARTESIAN_POINT('',(105.37165,-95.9331,1.585)); +#176406 = LINE('',#176407,#176408); +#176407 = CARTESIAN_POINT('',(105.37165,-96.7131,1.585)); +#176408 = VECTOR('',#176409,1.); +#176409 = DIRECTION('',(0.,1.,0.)); +#176410 = ORIENTED_EDGE('',*,*,#176411,.T.); +#176411 = EDGE_CURVE('',#176404,#176376,#176412,.T.); +#176412 = LINE('',#176413,#176414); +#176413 = CARTESIAN_POINT('',(105.37165,-95.9331,1.585)); +#176414 = VECTOR('',#176415,1.); +#176415 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176416 = PLANE('',#176417); +#176417 = AXIS2_PLACEMENT_3D('',#176418,#176419,#176420); +#176418 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176419 = DIRECTION('',(0.,0.,1.)); +#176420 = DIRECTION('',(1.,0.,-0.)); +#176421 = SHELL_BASED_SURFACE_MODEL('',(#176422)); +#176422 = OPEN_SHELL('',(#176423)); +#176423 = ADVANCED_FACE('',(#176424),#176567,.T.); +#176424 = FACE_BOUND('',#176425,.F.); +#176425 = EDGE_LOOP('',(#176426,#176437,#176445,#176453,#176462,#176470, + #176478,#176487,#176495,#176504,#176512,#176520,#176528,#176537, + #176545,#176553,#176561)); +#176426 = ORIENTED_EDGE('',*,*,#176427,.T.); +#176427 = EDGE_CURVE('',#176428,#176430,#176432,.T.); +#176428 = VERTEX_POINT('',#176429); +#176429 = CARTESIAN_POINT('',(181.451467,-95.903597,1.585)); +#176430 = VERTEX_POINT('',#176431); +#176431 = CARTESIAN_POINT('',(181.568135,-95.965957,1.585)); +#176432 = CIRCLE('',#176433,7.500000000003E-02); +#176433 = AXIS2_PLACEMENT_3D('',#176434,#176435,#176436); +#176434 = CARTESIAN_POINT('',(181.493135,-95.96595706555,1.585)); +#176435 = DIRECTION('',(0.,0.,-1.)); +#176436 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#176437 = ORIENTED_EDGE('',*,*,#176438,.T.); +#176438 = EDGE_CURVE('',#176430,#176439,#176441,.T.); +#176439 = VERTEX_POINT('',#176440); +#176440 = CARTESIAN_POINT('',(181.568135,-96.033814,1.585)); +#176441 = LINE('',#176442,#176443); +#176442 = CARTESIAN_POINT('',(181.568135,-95.965957,1.585)); +#176443 = VECTOR('',#176444,1.); +#176444 = DIRECTION('',(0.,-1.,0.)); +#176445 = ORIENTED_EDGE('',*,*,#176446,.T.); +#176446 = EDGE_CURVE('',#176439,#176447,#176449,.T.); +#176447 = VERTEX_POINT('',#176448); +#176448 = CARTESIAN_POINT('',(181.841101,-96.035255,1.585)); +#176449 = LINE('',#176450,#176451); +#176450 = CARTESIAN_POINT('',(181.568135,-96.033814,1.585)); +#176451 = VECTOR('',#176452,1.); +#176452 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#176453 = ORIENTED_EDGE('',*,*,#176454,.T.); +#176454 = EDGE_CURVE('',#176447,#176455,#176457,.T.); +#176455 = VERTEX_POINT('',#176456); +#176456 = CARTESIAN_POINT('',(181.826469,-96.183814,1.585)); +#176457 = CIRCLE('',#176458,7.500006711464E-02); +#176458 = AXIS2_PLACEMENT_3D('',#176459,#176460,#176461); +#176459 = CARTESIAN_POINT('',(181.82646906711,-96.10881393288,1.585)); +#176460 = DIRECTION('',(0.,0.,-1.)); +#176461 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#176462 = ORIENTED_EDGE('',*,*,#176463,.T.); +#176463 = EDGE_CURVE('',#176455,#176464,#176466,.T.); +#176464 = VERTEX_POINT('',#176465); +#176465 = CARTESIAN_POINT('',(181.568135,-96.183814,1.585)); +#176466 = LINE('',#176467,#176468); +#176467 = CARTESIAN_POINT('',(181.826469,-96.183814,1.585)); +#176468 = VECTOR('',#176469,1.); +#176469 = DIRECTION('',(-1.,0.,0.)); +#176470 = ORIENTED_EDGE('',*,*,#176471,.T.); +#176471 = EDGE_CURVE('',#176464,#176472,#176474,.T.); +#176472 = VERTEX_POINT('',#176473); +#176473 = CARTESIAN_POINT('',(181.566694,-96.599636,1.585)); +#176474 = LINE('',#176475,#176476); +#176475 = CARTESIAN_POINT('',(181.568135,-96.183814,1.585)); +#176476 = VECTOR('',#176477,1.); +#176477 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#176478 = ORIENTED_EDGE('',*,*,#176479,.T.); +#176479 = EDGE_CURVE('',#176472,#176480,#176482,.T.); +#176480 = VERTEX_POINT('',#176481); +#176481 = CARTESIAN_POINT('',(181.469417,-96.656155,1.585)); +#176482 = CIRCLE('',#176483,7.5000413282E-02); +#176483 = AXIS2_PLACEMENT_3D('',#176484,#176485,#176486); +#176484 = CARTESIAN_POINT('',(181.49313481481,-96.58500356113,1.585)); +#176485 = DIRECTION('',(0.,0.,-1.)); +#176486 = DIRECTION('',(0.980783731279,-0.195098109827,0.)); +#176487 = ORIENTED_EDGE('',*,*,#176488,.T.); +#176488 = EDGE_CURVE('',#176480,#176489,#176491,.T.); +#176489 = VERTEX_POINT('',#176490); +#176490 = CARTESIAN_POINT('',(180.741707,-96.412066,1.585)); +#176491 = LINE('',#176492,#176493); +#176492 = CARTESIAN_POINT('',(181.469417,-96.656155,1.585)); +#176493 = VECTOR('',#176494,1.); +#176494 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#176495 = ORIENTED_EDGE('',*,*,#176496,.T.); +#176496 = EDGE_CURVE('',#176489,#176497,#176499,.T.); +#176497 = VERTEX_POINT('',#176498); +#176498 = CARTESIAN_POINT('',(180.802567,-96.275758,1.585)); +#176499 = CIRCLE('',#176500,7.500001519551E-02); +#176500 = AXIS2_PLACEMENT_3D('',#176501,#176502,#176503); +#176501 = CARTESIAN_POINT('',(180.77885009996,-96.34690932417,1.585)); +#176502 = DIRECTION('',(0.,0.,-1.)); +#176503 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#176504 = ORIENTED_EDGE('',*,*,#176505,.T.); +#176505 = EDGE_CURVE('',#176497,#176506,#176508,.T.); +#176506 = VERTEX_POINT('',#176507); +#176507 = CARTESIAN_POINT('',(181.418135,-96.480947,1.585)); +#176508 = LINE('',#176509,#176510); +#176509 = CARTESIAN_POINT('',(180.802567,-96.275758,1.585)); +#176510 = VECTOR('',#176511,1.); +#176511 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#176512 = ORIENTED_EDGE('',*,*,#176513,.T.); +#176513 = EDGE_CURVE('',#176506,#176514,#176516,.T.); +#176514 = VERTEX_POINT('',#176515); +#176515 = CARTESIAN_POINT('',(181.418135,-96.183814,1.585)); +#176516 = LINE('',#176517,#176518); +#176517 = CARTESIAN_POINT('',(181.418135,-96.480947,1.585)); +#176518 = VECTOR('',#176519,1.); +#176519 = DIRECTION('',(0.,1.,0.)); +#176520 = ORIENTED_EDGE('',*,*,#176521,.T.); +#176521 = EDGE_CURVE('',#176514,#176522,#176524,.T.); +#176522 = VERTEX_POINT('',#176523); +#176523 = CARTESIAN_POINT('',(181.14517,-96.182373,1.585)); +#176524 = LINE('',#176525,#176526); +#176525 = CARTESIAN_POINT('',(181.418135,-96.183814,1.585)); +#176526 = VECTOR('',#176527,1.); +#176527 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#176528 = ORIENTED_EDGE('',*,*,#176529,.T.); +#176529 = EDGE_CURVE('',#176522,#176530,#176532,.T.); +#176530 = VERTEX_POINT('',#176531); +#176531 = CARTESIAN_POINT('',(181.159802,-96.033814,1.585)); +#176532 = CIRCLE('',#176533,7.500006711462E-02); +#176533 = AXIS2_PLACEMENT_3D('',#176534,#176535,#176536); +#176534 = CARTESIAN_POINT('',(181.15980193288,-96.10881406711,1.585)); +#176535 = DIRECTION('',(0.,0.,-1.)); +#176536 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#176537 = ORIENTED_EDGE('',*,*,#176538,.T.); +#176538 = EDGE_CURVE('',#176530,#176539,#176541,.T.); +#176539 = VERTEX_POINT('',#176540); +#176540 = CARTESIAN_POINT('',(181.418135,-96.033814,1.585)); +#176541 = LINE('',#176542,#176543); +#176542 = CARTESIAN_POINT('',(181.159802,-96.033814,1.585)); +#176543 = VECTOR('',#176544,1.); +#176544 = DIRECTION('',(1.,0.,0.)); +#176545 = ORIENTED_EDGE('',*,*,#176546,.T.); +#176546 = EDGE_CURVE('',#176539,#176547,#176549,.T.); +#176547 = VERTEX_POINT('',#176548); +#176548 = CARTESIAN_POINT('',(181.419576,-95.951325,1.585)); +#176549 = LINE('',#176550,#176551); +#176550 = CARTESIAN_POINT('',(181.418135,-96.033814,1.585)); +#176551 = VECTOR('',#176552,1.); +#176552 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#176553 = ORIENTED_EDGE('',*,*,#176554,.T.); +#176554 = EDGE_CURVE('',#176547,#176555,#176557,.T.); +#176555 = VERTEX_POINT('',#176556); +#176556 = CARTESIAN_POINT('',(181.430775,-95.924289,1.585)); +#176557 = LINE('',#176558,#176559); +#176558 = CARTESIAN_POINT('',(181.419576,-95.951325,1.585)); +#176559 = VECTOR('',#176560,1.); +#176560 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#176561 = ORIENTED_EDGE('',*,*,#176562,.T.); +#176562 = EDGE_CURVE('',#176555,#176428,#176563,.T.); +#176563 = LINE('',#176564,#176565); +#176564 = CARTESIAN_POINT('',(181.430775,-95.924289,1.585)); +#176565 = VECTOR('',#176566,1.); +#176566 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176567 = PLANE('',#176568); +#176568 = AXIS2_PLACEMENT_3D('',#176569,#176570,#176571); +#176569 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176570 = DIRECTION('',(0.,0.,1.)); +#176571 = DIRECTION('',(1.,0.,-0.)); +#176572 = SHELL_BASED_SURFACE_MODEL('',(#176573)); +#176573 = OPEN_SHELL('',(#176574)); +#176574 = ADVANCED_FACE('',(#176575),#176619,.T.); +#176575 = FACE_BOUND('',#176576,.F.); +#176576 = EDGE_LOOP('',(#176577,#176588,#176596,#176605,#176613)); +#176577 = ORIENTED_EDGE('',*,*,#176578,.T.); +#176578 = EDGE_CURVE('',#176579,#176581,#176583,.T.); +#176579 = VERTEX_POINT('',#176580); +#176580 = CARTESIAN_POINT('',(178.901217,-96.038887,1.585)); +#176581 = VERTEX_POINT('',#176582); +#176582 = CARTESIAN_POINT('',(179.01665,-96.061848,1.585)); +#176583 = CIRCLE('',#176584,6.000007318647E-02); +#176584 = AXIS2_PLACEMENT_3D('',#176585,#176586,#176587); +#176585 = CARTESIAN_POINT('',(178.95664992681,-96.06184782331,1.585)); +#176586 = DIRECTION('',(0.,0.,-1.)); +#176587 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176588 = ORIENTED_EDGE('',*,*,#176589,.T.); +#176589 = EDGE_CURVE('',#176581,#176590,#176592,.T.); +#176590 = VERTEX_POINT('',#176591); +#176591 = CARTESIAN_POINT('',(179.01665,-96.584352,1.585)); +#176592 = LINE('',#176593,#176594); +#176593 = CARTESIAN_POINT('',(179.01665,-96.061848,1.585)); +#176594 = VECTOR('',#176595,1.); +#176595 = DIRECTION('',(0.,-1.,0.)); +#176596 = ORIENTED_EDGE('',*,*,#176597,.T.); +#176597 = EDGE_CURVE('',#176590,#176598,#176600,.T.); +#176598 = VERTEX_POINT('',#176599); +#176599 = CARTESIAN_POINT('',(178.89665,-96.584352,1.585)); +#176600 = CIRCLE('',#176601,6.000000000043E-02); +#176601 = AXIS2_PLACEMENT_3D('',#176602,#176603,#176604); +#176602 = CARTESIAN_POINT('',(178.95665,-96.58435222558,1.585)); +#176603 = DIRECTION('',(0.,0.,-1.)); +#176604 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#176605 = ORIENTED_EDGE('',*,*,#176606,.T.); +#176606 = EDGE_CURVE('',#176598,#176607,#176609,.T.); +#176607 = VERTEX_POINT('',#176608); +#176608 = CARTESIAN_POINT('',(178.89665,-96.061848,1.585)); +#176609 = LINE('',#176610,#176611); +#176610 = CARTESIAN_POINT('',(178.89665,-96.584352,1.585)); +#176611 = VECTOR('',#176612,1.); +#176612 = DIRECTION('',(0.,1.,0.)); +#176613 = ORIENTED_EDGE('',*,*,#176614,.T.); +#176614 = EDGE_CURVE('',#176607,#176579,#176615,.T.); +#176615 = LINE('',#176616,#176617); +#176616 = CARTESIAN_POINT('',(178.89665,-96.061848,1.585)); +#176617 = VECTOR('',#176618,1.); +#176618 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176619 = PLANE('',#176620); +#176620 = AXIS2_PLACEMENT_3D('',#176621,#176622,#176623); +#176621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176622 = DIRECTION('',(0.,0.,1.)); +#176623 = DIRECTION('',(1.,0.,-0.)); +#176624 = SHELL_BASED_SURFACE_MODEL('',(#176625)); +#176625 = OPEN_SHELL('',(#176626)); +#176626 = ADVANCED_FACE('',(#176627),#176671,.T.); +#176627 = FACE_BOUND('',#176628,.F.); +#176628 = EDGE_LOOP('',(#176629,#176640,#176648,#176657,#176665)); +#176629 = ORIENTED_EDGE('',*,*,#176630,.T.); +#176630 = EDGE_CURVE('',#176631,#176633,#176635,.T.); +#176631 = VERTEX_POINT('',#176632); +#176632 = CARTESIAN_POINT('',(180.371217,-96.038887,1.585)); +#176633 = VERTEX_POINT('',#176634); +#176634 = CARTESIAN_POINT('',(180.48665,-96.061848,1.585)); +#176635 = CIRCLE('',#176636,6.000007318647E-02); +#176636 = AXIS2_PLACEMENT_3D('',#176637,#176638,#176639); +#176637 = CARTESIAN_POINT('',(180.42664992681,-96.06184782331,1.585)); +#176638 = DIRECTION('',(0.,0.,-1.)); +#176639 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#176640 = ORIENTED_EDGE('',*,*,#176641,.T.); +#176641 = EDGE_CURVE('',#176633,#176642,#176644,.T.); +#176642 = VERTEX_POINT('',#176643); +#176643 = CARTESIAN_POINT('',(180.48665,-96.584352,1.585)); +#176644 = LINE('',#176645,#176646); +#176645 = CARTESIAN_POINT('',(180.48665,-96.061848,1.585)); +#176646 = VECTOR('',#176647,1.); +#176647 = DIRECTION('',(0.,-1.,0.)); +#176648 = ORIENTED_EDGE('',*,*,#176649,.T.); +#176649 = EDGE_CURVE('',#176642,#176650,#176652,.T.); +#176650 = VERTEX_POINT('',#176651); +#176651 = CARTESIAN_POINT('',(180.36665,-96.584352,1.585)); +#176652 = CIRCLE('',#176653,6.000000000043E-02); +#176653 = AXIS2_PLACEMENT_3D('',#176654,#176655,#176656); +#176654 = CARTESIAN_POINT('',(180.42665,-96.58435222558,1.585)); +#176655 = DIRECTION('',(0.,0.,-1.)); +#176656 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#176657 = ORIENTED_EDGE('',*,*,#176658,.T.); +#176658 = EDGE_CURVE('',#176650,#176659,#176661,.T.); +#176659 = VERTEX_POINT('',#176660); +#176660 = CARTESIAN_POINT('',(180.36665,-96.061848,1.585)); +#176661 = LINE('',#176662,#176663); +#176662 = CARTESIAN_POINT('',(180.36665,-96.584352,1.585)); +#176663 = VECTOR('',#176664,1.); +#176664 = DIRECTION('',(0.,1.,0.)); +#176665 = ORIENTED_EDGE('',*,*,#176666,.T.); +#176666 = EDGE_CURVE('',#176659,#176631,#176667,.T.); +#176667 = LINE('',#176668,#176669); +#176668 = CARTESIAN_POINT('',(180.36665,-96.061848,1.585)); +#176669 = VECTOR('',#176670,1.); +#176670 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#176671 = PLANE('',#176672); +#176672 = AXIS2_PLACEMENT_3D('',#176673,#176674,#176675); +#176673 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176674 = DIRECTION('',(0.,0.,1.)); +#176675 = DIRECTION('',(1.,0.,-0.)); +#176676 = SHELL_BASED_SURFACE_MODEL('',(#176677)); +#176677 = OPEN_SHELL('',(#176678)); +#176678 = ADVANCED_FACE('',(#176679),#176813,.T.); +#176679 = FACE_BOUND('',#176680,.F.); +#176680 = EDGE_LOOP('',(#176681,#176691,#176699,#176708,#176716,#176724, + #176733,#176741,#176750,#176758,#176766,#176774,#176782,#176791, + #176799,#176807)); +#176681 = ORIENTED_EDGE('',*,*,#176682,.T.); +#176682 = EDGE_CURVE('',#176683,#176685,#176687,.T.); +#176683 = VERTEX_POINT('',#176684); +#176684 = CARTESIAN_POINT('',(113.339752,-95.294941,1.585)); +#176685 = VERTEX_POINT('',#176686); +#176686 = CARTESIAN_POINT('',(113.378208,-95.27436,1.585)); +#176687 = LINE('',#176688,#176689); +#176688 = CARTESIAN_POINT('',(113.339752,-95.294941,1.585)); +#176689 = VECTOR('',#176690,1.); +#176690 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#176691 = ORIENTED_EDGE('',*,*,#176692,.T.); +#176692 = EDGE_CURVE('',#176685,#176693,#176695,.T.); +#176693 = VERTEX_POINT('',#176694); +#176694 = CARTESIAN_POINT('',(113.400045,-95.27436,1.585)); +#176695 = LINE('',#176696,#176697); +#176696 = CARTESIAN_POINT('',(113.378208,-95.27436,1.585)); +#176697 = VECTOR('',#176698,1.); +#176698 = DIRECTION('',(1.,0.,0.)); +#176699 = ORIENTED_EDGE('',*,*,#176700,.T.); +#176700 = EDGE_CURVE('',#176693,#176701,#176703,.T.); +#176701 = VERTEX_POINT('',#176702); +#176702 = CARTESIAN_POINT('',(113.46784,-95.347919,1.585)); +#176703 = CIRCLE('',#176704,7.21689809423E-02); +#176704 = AXIS2_PLACEMENT_3D('',#176705,#176706,#176707); +#176705 = CARTESIAN_POINT('',(113.39568706389,-95.34639728342,1.585)); +#176706 = DIRECTION('',(0.,0.,-1.)); +#176707 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#176708 = ORIENTED_EDGE('',*,*,#176709,.T.); +#176709 = EDGE_CURVE('',#176701,#176710,#176712,.T.); +#176710 = VERTEX_POINT('',#176711); +#176711 = CARTESIAN_POINT('',(113.46784,-96.272919,1.585)); +#176712 = LINE('',#176713,#176714); +#176713 = CARTESIAN_POINT('',(113.46784,-95.347919,1.585)); +#176714 = VECTOR('',#176715,1.); +#176715 = DIRECTION('',(0.,-1.,0.)); +#176716 = ORIENTED_EDGE('',*,*,#176717,.T.); +#176717 = EDGE_CURVE('',#176710,#176718,#176720,.T.); +#176718 = VERTEX_POINT('',#176719); +#176719 = CARTESIAN_POINT('',(113.693186,-96.27436,1.585)); +#176720 = LINE('',#176721,#176722); +#176721 = CARTESIAN_POINT('',(113.46784,-96.272919,1.585)); +#176722 = VECTOR('',#176723,1.); +#176723 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#176724 = ORIENTED_EDGE('',*,*,#176725,.T.); +#176725 = EDGE_CURVE('',#176718,#176726,#176728,.T.); +#176726 = VERTEX_POINT('',#176727); +#176727 = CARTESIAN_POINT('',(113.678554,-96.422919,1.585)); +#176728 = CIRCLE('',#176729,7.500006711463E-02); +#176729 = AXIS2_PLACEMENT_3D('',#176730,#176731,#176732); +#176730 = CARTESIAN_POINT('',(113.67855406711,-96.34791893288,1.585)); +#176731 = DIRECTION('',(0.,0.,-1.)); +#176732 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#176733 = ORIENTED_EDGE('',*,*,#176734,.T.); +#176734 = EDGE_CURVE('',#176726,#176735,#176737,.T.); +#176735 = VERTEX_POINT('',#176736); +#176736 = CARTESIAN_POINT('',(113.092494,-96.421478,1.585)); +#176737 = LINE('',#176738,#176739); +#176738 = CARTESIAN_POINT('',(113.678554,-96.422919,1.585)); +#176739 = VECTOR('',#176740,1.); +#176740 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#176741 = ORIENTED_EDGE('',*,*,#176742,.T.); +#176742 = EDGE_CURVE('',#176735,#176743,#176745,.T.); +#176743 = VERTEX_POINT('',#176744); +#176744 = CARTESIAN_POINT('',(113.107126,-96.272919,1.585)); +#176745 = CIRCLE('',#176746,7.500006711463E-02); +#176746 = AXIS2_PLACEMENT_3D('',#176747,#176748,#176749); +#176747 = CARTESIAN_POINT('',(113.10712593288,-96.34791906711,1.585)); +#176748 = DIRECTION('',(0.,0.,-1.)); +#176749 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#176750 = ORIENTED_EDGE('',*,*,#176751,.T.); +#176751 = EDGE_CURVE('',#176743,#176752,#176754,.T.); +#176752 = VERTEX_POINT('',#176753); +#176753 = CARTESIAN_POINT('',(113.31784,-96.272919,1.585)); +#176754 = LINE('',#176755,#176756); +#176755 = CARTESIAN_POINT('',(113.107126,-96.272919,1.585)); +#176756 = VECTOR('',#176757,1.); +#176757 = DIRECTION('',(1.,0.,0.)); +#176758 = ORIENTED_EDGE('',*,*,#176759,.T.); +#176759 = EDGE_CURVE('',#176752,#176760,#176762,.T.); +#176760 = VERTEX_POINT('',#176761); +#176761 = CARTESIAN_POINT('',(113.31784,-95.576604,1.585)); +#176762 = LINE('',#176763,#176764); +#176763 = CARTESIAN_POINT('',(113.31784,-96.272919,1.585)); +#176764 = VECTOR('',#176765,1.); +#176765 = DIRECTION('',(0.,1.,0.)); +#176766 = ORIENTED_EDGE('',*,*,#176767,.T.); +#176767 = EDGE_CURVE('',#176760,#176768,#176770,.T.); +#176768 = VERTEX_POINT('',#176769); +#176769 = CARTESIAN_POINT('',(113.242204,-95.649131,1.585)); +#176770 = LINE('',#176771,#176772); +#176771 = CARTESIAN_POINT('',(113.31784,-95.576604,1.585)); +#176772 = VECTOR('',#176773,1.); +#176773 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#176774 = ORIENTED_EDGE('',*,*,#176775,.T.); +#176775 = EDGE_CURVE('',#176768,#176776,#176778,.T.); +#176776 = VERTEX_POINT('',#176777); +#176777 = CARTESIAN_POINT('',(113.126935,-95.70597,1.585)); +#176778 = LINE('',#176779,#176780); +#176779 = CARTESIAN_POINT('',(113.242204,-95.649131,1.585)); +#176780 = VECTOR('',#176781,1.); +#176781 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#176782 = ORIENTED_EDGE('',*,*,#176783,.T.); +#176783 = EDGE_CURVE('',#176776,#176784,#176786,.T.); +#176784 = VERTEX_POINT('',#176785); +#176785 = CARTESIAN_POINT('',(113.073585,-95.566551,1.585)); +#176786 = CIRCLE('',#176787,7.500005272361E-02); +#176787 = AXIS2_PLACEMENT_3D('',#176788,#176789,#176790); +#176788 = CARTESIAN_POINT('',(113.10712555676,-95.63363332972,1.585)); +#176789 = DIRECTION('',(0.,0.,-1.)); +#176790 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#176791 = ORIENTED_EDGE('',*,*,#176792,.T.); +#176792 = EDGE_CURVE('',#176784,#176793,#176795,.T.); +#176793 = VERTEX_POINT('',#176794); +#176794 = CARTESIAN_POINT('',(113.157937,-95.524375,1.585)); +#176795 = LINE('',#176796,#176797); +#176796 = CARTESIAN_POINT('',(113.073585,-95.566551,1.585)); +#176797 = VECTOR('',#176798,1.); +#176798 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#176799 = ORIENTED_EDGE('',*,*,#176800,.T.); +#176800 = EDGE_CURVE('',#176793,#176801,#176803,.T.); +#176801 = VERTEX_POINT('',#176802); +#176802 = CARTESIAN_POINT('',(113.239316,-95.442996,1.585)); +#176803 = LINE('',#176804,#176805); +#176804 = CARTESIAN_POINT('',(113.157937,-95.524375,1.585)); +#176805 = VECTOR('',#176806,1.); +#176806 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#176807 = ORIENTED_EDGE('',*,*,#176808,.T.); +#176808 = EDGE_CURVE('',#176801,#176683,#176809,.T.); +#176809 = LINE('',#176810,#176811); +#176810 = CARTESIAN_POINT('',(113.239316,-95.442996,1.585)); +#176811 = VECTOR('',#176812,1.); +#176812 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#176813 = PLANE('',#176814); +#176814 = AXIS2_PLACEMENT_3D('',#176815,#176816,#176817); +#176815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#176816 = DIRECTION('',(0.,0.,1.)); +#176817 = DIRECTION('',(1.,0.,-0.)); +#176818 = SHELL_BASED_SURFACE_MODEL('',(#176819)); +#176819 = OPEN_SHELL('',(#176820)); +#176820 = ADVANCED_FACE('',(#176821),#177006,.T.); +#176821 = FACE_BOUND('',#176822,.F.); +#176822 = EDGE_LOOP('',(#176823,#176834,#176842,#176851,#176859,#176868, + #176876,#176885,#176893,#176901,#176909,#176918,#176926,#176935, + #176943,#176952,#176960,#176968,#176976,#176984,#176992,#177000)); +#176823 = ORIENTED_EDGE('',*,*,#176824,.T.); +#176824 = EDGE_CURVE('',#176825,#176827,#176829,.T.); +#176825 = VERTEX_POINT('',#176826); +#176826 = CARTESIAN_POINT('',(111.308078,-95.330381,1.585)); +#176827 = VERTEX_POINT('',#176828); +#176828 = CARTESIAN_POINT('',(111.767841,-95.333178,1.585)); +#176829 = CIRCLE('',#176830,0.460785175821); +#176830 = AXIS2_PLACEMENT_3D('',#176831,#176832,#176833); +#176831 = CARTESIAN_POINT('',(111.53553010897,-95.73111597024,1.585)); +#176832 = DIRECTION('',(0.,0.,-1.)); +#176833 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#176834 = ORIENTED_EDGE('',*,*,#176835,.T.); +#176835 = EDGE_CURVE('',#176827,#176836,#176838,.T.); +#176836 = VERTEX_POINT('',#176837); +#176837 = CARTESIAN_POINT('',(111.836152,-95.401489,1.585)); +#176838 = LINE('',#176839,#176840); +#176839 = CARTESIAN_POINT('',(111.767841,-95.333178,1.585)); +#176840 = VECTOR('',#176841,1.); +#176841 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176842 = ORIENTED_EDGE('',*,*,#176843,.T.); +#176843 = EDGE_CURVE('',#176836,#176844,#176846,.T.); +#176844 = VERTEX_POINT('',#176845); +#176845 = CARTESIAN_POINT('',(111.720759,-95.49619,1.585)); +#176846 = CIRCLE('',#176847,7.500003178655E-02); +#176847 = AXIS2_PLACEMENT_3D('',#176848,#176849,#176850); +#176848 = CARTESIAN_POINT('',(111.77379156212,-95.4431565,1.585)); +#176849 = DIRECTION('',(0.,0.,-1.)); +#176850 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#176851 = ORIENTED_EDGE('',*,*,#176852,.T.); +#176852 = EDGE_CURVE('',#176844,#176853,#176855,.T.); +#176853 = VERTEX_POINT('',#176854); +#176854 = CARTESIAN_POINT('',(111.685659,-95.46109,1.585)); +#176855 = LINE('',#176856,#176857); +#176856 = CARTESIAN_POINT('',(111.720759,-95.49619,1.585)); +#176857 = VECTOR('',#176858,1.); +#176858 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176859 = ORIENTED_EDGE('',*,*,#176860,.T.); +#176860 = EDGE_CURVE('',#176853,#176861,#176863,.T.); +#176861 = VERTEX_POINT('',#176862); +#176862 = CARTESIAN_POINT('',(111.385735,-95.46109,1.585)); +#176863 = CIRCLE('',#176864,0.299308637371); +#176864 = AXIS2_PLACEMENT_3D('',#176865,#176866,#176867); +#176865 = CARTESIAN_POINT('',(111.535697,-95.720121,1.585)); +#176866 = DIRECTION('',(0.,0.,1.)); +#176867 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#176868 = ORIENTED_EDGE('',*,*,#176869,.T.); +#176869 = EDGE_CURVE('',#176861,#176870,#176872,.T.); +#176870 = VERTEX_POINT('',#176871); +#176871 = CARTESIAN_POINT('',(111.311622,-95.535203,1.585)); +#176872 = LINE('',#176873,#176874); +#176873 = CARTESIAN_POINT('',(111.385735,-95.46109,1.585)); +#176874 = VECTOR('',#176875,1.); +#176875 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#176876 = ORIENTED_EDGE('',*,*,#176877,.T.); +#176877 = EDGE_CURVE('',#176870,#176878,#176880,.T.); +#176878 = VERTEX_POINT('',#176879); +#176879 = CARTESIAN_POINT('',(111.229745,-95.910113,1.585)); +#176880 = CIRCLE('',#176881,0.611712714363); +#176881 = AXIS2_PLACEMENT_3D('',#176882,#176883,#176884); +#176882 = CARTESIAN_POINT('',(111.83815027521,-95.8465876822,1.585)); +#176883 = DIRECTION('',(0.,0.,1.)); +#176884 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#176885 = ORIENTED_EDGE('',*,*,#176886,.T.); +#176886 = EDGE_CURVE('',#176878,#176887,#176889,.T.); +#176887 = VERTEX_POINT('',#176888); +#176888 = CARTESIAN_POINT('',(111.273128,-96.083647,1.585)); +#176889 = LINE('',#176890,#176891); +#176890 = CARTESIAN_POINT('',(111.229745,-95.910113,1.585)); +#176891 = VECTOR('',#176892,1.); +#176892 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#176893 = ORIENTED_EDGE('',*,*,#176894,.T.); +#176894 = EDGE_CURVE('',#176887,#176895,#176897,.T.); +#176895 = VERTEX_POINT('',#176896); +#176896 = CARTESIAN_POINT('',(111.311622,-96.160634,1.585)); +#176897 = LINE('',#176898,#176899); +#176898 = CARTESIAN_POINT('',(111.273128,-96.083647,1.585)); +#176899 = VECTOR('',#176900,1.); +#176900 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#176901 = ORIENTED_EDGE('',*,*,#176902,.T.); +#176902 = EDGE_CURVE('',#176895,#176903,#176905,.T.); +#176903 = VERTEX_POINT('',#176904); +#176904 = CARTESIAN_POINT('',(111.385735,-96.234748,1.585)); +#176905 = LINE('',#176906,#176907); +#176906 = CARTESIAN_POINT('',(111.311622,-96.160634,1.585)); +#176907 = VECTOR('',#176908,1.); +#176908 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#176909 = ORIENTED_EDGE('',*,*,#176910,.T.); +#176910 = EDGE_CURVE('',#176903,#176911,#176913,.T.); +#176911 = VERTEX_POINT('',#176912); +#176912 = CARTESIAN_POINT('',(111.685659,-96.234747,1.585)); +#176913 = CIRCLE('',#176914,0.299305962385); +#176914 = AXIS2_PLACEMENT_3D('',#176915,#176916,#176917); +#176915 = CARTESIAN_POINT('',(111.53569613635,-95.97571959093,1.585)); +#176916 = DIRECTION('',(0.,0.,1.)); +#176917 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#176918 = ORIENTED_EDGE('',*,*,#176919,.T.); +#176919 = EDGE_CURVE('',#176911,#176920,#176922,.T.); +#176920 = VERTEX_POINT('',#176921); +#176921 = CARTESIAN_POINT('',(111.732124,-96.19032,1.585)); +#176922 = LINE('',#176923,#176924); +#176923 = CARTESIAN_POINT('',(111.685659,-96.234747,1.585)); +#176924 = VECTOR('',#176925,1.); +#176925 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#176926 = ORIENTED_EDGE('',*,*,#176927,.T.); +#176927 = EDGE_CURVE('',#176920,#176928,#176930,.T.); +#176928 = VERTEX_POINT('',#176929); +#176929 = CARTESIAN_POINT('',(111.826825,-96.305713,1.585)); +#176930 = CIRCLE('',#176931,7.499993690112E-02); +#176931 = AXIS2_PLACEMENT_3D('',#176932,#176933,#176934); +#176932 = CARTESIAN_POINT('',(111.7737922483,-96.25267982374,1.585)); +#176933 = DIRECTION('',(0.,0.,-1.)); +#176934 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#176935 = ORIENTED_EDGE('',*,*,#176936,.T.); +#176936 = EDGE_CURVE('',#176928,#176937,#176939,.T.); +#176937 = VERTEX_POINT('',#176938); +#176938 = CARTESIAN_POINT('',(111.763315,-96.365457,1.585)); +#176939 = LINE('',#176940,#176941); +#176940 = CARTESIAN_POINT('',(111.826825,-96.305713,1.585)); +#176941 = VECTOR('',#176942,1.); +#176942 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#176943 = ORIENTED_EDGE('',*,*,#176944,.T.); +#176944 = EDGE_CURVE('',#176937,#176945,#176947,.T.); +#176945 = VERTEX_POINT('',#176946); +#176946 = CARTESIAN_POINT('',(111.303553,-96.362661,1.585)); +#176947 = CIRCLE('',#176948,0.461067828848); +#176948 = AXIS2_PLACEMENT_3D('',#176949,#176950,#176951); +#176949 = CARTESIAN_POINT('',(111.53586451268,-95.96439613352,1.585)); +#176950 = DIRECTION('',(-0.,0.,-1.)); +#176951 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#176952 = ORIENTED_EDGE('',*,*,#176953,.T.); +#176953 = EDGE_CURVE('',#176945,#176954,#176956,.T.); +#176954 = VERTEX_POINT('',#176955); +#176955 = CARTESIAN_POINT('',(111.186864,-96.244898,1.585)); +#176956 = LINE('',#176957,#176958); +#176957 = CARTESIAN_POINT('',(111.303553,-96.362661,1.585)); +#176958 = VECTOR('',#176959,1.); +#176959 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#176960 = ORIENTED_EDGE('',*,*,#176961,.T.); +#176961 = EDGE_CURVE('',#176954,#176962,#176964,.T.); +#176962 = VERTEX_POINT('',#176963); +#176963 = CARTESIAN_POINT('',(111.129603,-96.128013,1.585)); +#176964 = LINE('',#176965,#176966); +#176965 = CARTESIAN_POINT('',(111.186864,-96.244898,1.585)); +#176966 = VECTOR('',#176967,1.); +#176967 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#176968 = ORIENTED_EDGE('',*,*,#176969,.T.); +#176969 = EDGE_CURVE('',#176962,#176970,#176972,.T.); +#176970 = VERTEX_POINT('',#176971); +#176971 = CARTESIAN_POINT('',(111.079745,-95.919347,1.585)); +#176972 = LINE('',#176973,#176974); +#176973 = CARTESIAN_POINT('',(111.129603,-96.128013,1.585)); +#176974 = VECTOR('',#176975,1.); +#176975 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#176976 = ORIENTED_EDGE('',*,*,#176977,.T.); +#176977 = EDGE_CURVE('',#176970,#176978,#176980,.T.); +#176978 = VERTEX_POINT('',#176979); +#176979 = CARTESIAN_POINT('',(111.081984,-95.7583,1.585)); +#176980 = LINE('',#176981,#176982); +#176981 = CARTESIAN_POINT('',(111.079745,-95.919347,1.585)); +#176982 = VECTOR('',#176983,1.); +#176983 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#176984 = ORIENTED_EDGE('',*,*,#176985,.T.); +#176985 = EDGE_CURVE('',#176978,#176986,#176988,.T.); +#176986 = VERTEX_POINT('',#176987); +#176987 = CARTESIAN_POINT('',(111.135282,-95.552473,1.585)); +#176988 = LINE('',#176989,#176990); +#176989 = CARTESIAN_POINT('',(111.081984,-95.7583,1.585)); +#176990 = VECTOR('',#176991,1.); +#176991 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#176992 = ORIENTED_EDGE('',*,*,#176993,.T.); +#176993 = EDGE_CURVE('',#176986,#176994,#176996,.T.); +#176994 = VERTEX_POINT('',#176995); +#176995 = CARTESIAN_POINT('',(111.192231,-95.443492,1.585)); +#176996 = LINE('',#176997,#176998); +#176997 = CARTESIAN_POINT('',(111.135282,-95.552473,1.585)); +#176998 = VECTOR('',#176999,1.); +#176999 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#177000 = ORIENTED_EDGE('',*,*,#177001,.T.); +#177001 = EDGE_CURVE('',#176994,#176825,#177002,.T.); +#177002 = LINE('',#177003,#177004); +#177003 = CARTESIAN_POINT('',(111.192231,-95.443492,1.585)); +#177004 = VECTOR('',#177005,1.); +#177005 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#177006 = PLANE('',#177007); +#177007 = AXIS2_PLACEMENT_3D('',#177008,#177009,#177010); +#177008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177009 = DIRECTION('',(0.,0.,1.)); +#177010 = DIRECTION('',(1.,0.,-0.)); +#177011 = SHELL_BASED_SURFACE_MODEL('',(#177012)); +#177012 = OPEN_SHELL('',(#177013)); +#177013 = ADVANCED_FACE('',(#177014),#177200,.T.); +#177014 = FACE_BOUND('',#177015,.F.); +#177015 = EDGE_LOOP('',(#177016,#177027,#177035,#177044,#177052,#177060, + #177069,#177077,#177086,#177094,#177102,#177110,#177119,#177127, + #177136,#177144,#177153,#177161,#177169,#177177,#177186,#177194)); +#177016 = ORIENTED_EDGE('',*,*,#177017,.T.); +#177017 = EDGE_CURVE('',#177018,#177020,#177022,.T.); +#177018 = VERTEX_POINT('',#177019); +#177019 = CARTESIAN_POINT('',(112.092494,-95.421478,1.585)); +#177020 = VERTEX_POINT('',#177021); +#177021 = CARTESIAN_POINT('',(112.107126,-95.272919,1.585)); +#177022 = CIRCLE('',#177023,7.500006711463E-02); +#177023 = AXIS2_PLACEMENT_3D('',#177024,#177025,#177026); +#177024 = CARTESIAN_POINT('',(112.10712593288,-95.34791906711,1.585)); +#177025 = DIRECTION('',(0.,0.,-1.)); +#177026 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#177027 = ORIENTED_EDGE('',*,*,#177028,.T.); +#177028 = EDGE_CURVE('',#177020,#177029,#177031,.T.); +#177029 = VERTEX_POINT('',#177030); +#177030 = CARTESIAN_POINT('',(112.733911,-95.273681,1.585)); +#177031 = LINE('',#177032,#177033); +#177032 = CARTESIAN_POINT('',(112.107126,-95.272919,1.585)); +#177033 = VECTOR('',#177034,1.); +#177034 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#177035 = ORIENTED_EDGE('',*,*,#177036,.T.); +#177036 = EDGE_CURVE('',#177029,#177037,#177039,.T.); +#177037 = VERTEX_POINT('',#177038); +#177038 = CARTESIAN_POINT('',(112.799732,-95.362551,1.585)); +#177039 = CIRCLE('',#177040,7.447391611627E-02); +#177040 = AXIS2_PLACEMENT_3D('',#177041,#177042,#177043); +#177041 = CARTESIAN_POINT('',(112.72673192664,-95.3478080874,1.585)); +#177042 = DIRECTION('',(0.,0.,-1.)); +#177043 = DIRECTION('',(9.639715124831E-02,0.995342950561,0.)); +#177044 = ORIENTED_EDGE('',*,*,#177045,.T.); +#177045 = EDGE_CURVE('',#177037,#177046,#177048,.T.); +#177046 = VERTEX_POINT('',#177047); +#177047 = CARTESIAN_POINT('',(112.782616,-95.397307,1.585)); +#177048 = LINE('',#177049,#177050); +#177049 = CARTESIAN_POINT('',(112.799732,-95.362551,1.585)); +#177050 = VECTOR('',#177051,1.); +#177051 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#177052 = ORIENTED_EDGE('',*,*,#177053,.T.); +#177053 = EDGE_CURVE('',#177046,#177054,#177056,.T.); +#177054 = VERTEX_POINT('',#177055); +#177055 = CARTESIAN_POINT('',(112.55572,-95.656616,1.585)); +#177056 = LINE('',#177057,#177058); +#177057 = CARTESIAN_POINT('',(112.782616,-95.397307,1.585)); +#177058 = VECTOR('',#177059,1.); +#177059 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#177060 = ORIENTED_EDGE('',*,*,#177061,.T.); +#177061 = EDGE_CURVE('',#177054,#177062,#177064,.T.); +#177062 = VERTEX_POINT('',#177063); +#177063 = CARTESIAN_POINT('',(112.799732,-95.904715,1.585)); +#177064 = CIRCLE('',#177065,0.348520834816); +#177065 = AXIS2_PLACEMENT_3D('',#177066,#177067,#177068); +#177066 = CARTESIAN_POINT('',(112.4624266174,-95.99241819931,1.585)); +#177067 = DIRECTION('',(0.,0.,-1.)); +#177068 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#177069 = ORIENTED_EDGE('',*,*,#177070,.T.); +#177070 = EDGE_CURVE('',#177062,#177071,#177073,.T.); +#177071 = VERTEX_POINT('',#177072); +#177072 = CARTESIAN_POINT('',(112.79851,-96.177252,1.585)); +#177073 = LINE('',#177074,#177075); +#177074 = CARTESIAN_POINT('',(112.799732,-95.904715,1.585)); +#177075 = VECTOR('',#177076,1.); +#177076 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#177077 = ORIENTED_EDGE('',*,*,#177078,.T.); +#177078 = EDGE_CURVE('',#177071,#177079,#177081,.T.); +#177079 = VERTEX_POINT('',#177080); +#177080 = CARTESIAN_POINT('',(112.550329,-96.421478,1.585)); +#177081 = CIRCLE('',#177082,0.348635327447); +#177082 = AXIS2_PLACEMENT_3D('',#177083,#177084,#177085); +#177083 = CARTESIAN_POINT('',(112.46255748129,-96.08407208415,1.585)); +#177084 = DIRECTION('',(0.,0.,-1.)); +#177085 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#177086 = ORIENTED_EDGE('',*,*,#177087,.T.); +#177087 = EDGE_CURVE('',#177079,#177088,#177090,.T.); +#177088 = VERTEX_POINT('',#177089); +#177089 = CARTESIAN_POINT('',(112.230173,-96.420256,1.585)); +#177090 = LINE('',#177091,#177092); +#177091 = CARTESIAN_POINT('',(112.550329,-96.421478,1.585)); +#177092 = VECTOR('',#177093,1.); +#177093 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#177094 = ORIENTED_EDGE('',*,*,#177095,.T.); +#177095 = EDGE_CURVE('',#177088,#177096,#177098,.T.); +#177096 = VERTEX_POINT('',#177097); +#177097 = CARTESIAN_POINT('',(112.10746,-96.35805,1.585)); +#177098 = LINE('',#177099,#177100); +#177099 = CARTESIAN_POINT('',(112.230173,-96.420256,1.585)); +#177100 = VECTOR('',#177101,1.); +#177101 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#177102 = ORIENTED_EDGE('',*,*,#177103,.T.); +#177103 = EDGE_CURVE('',#177096,#177104,#177106,.T.); +#177104 = VERTEX_POINT('',#177105); +#177105 = CARTESIAN_POINT('',(112.044765,-96.294347,1.585)); +#177106 = LINE('',#177107,#177108); +#177107 = CARTESIAN_POINT('',(112.10746,-96.35805,1.585)); +#177108 = VECTOR('',#177109,1.); +#177109 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#177110 = ORIENTED_EDGE('',*,*,#177111,.T.); +#177111 = EDGE_CURVE('',#177104,#177112,#177114,.T.); +#177112 = VERTEX_POINT('',#177113); +#177113 = CARTESIAN_POINT('',(112.16016,-96.199648,1.585)); +#177114 = CIRCLE('',#177115,7.50001266804E-02); +#177115 = AXIS2_PLACEMENT_3D('',#177116,#177117,#177118); +#177116 = CARTESIAN_POINT('',(112.10712605199,-96.25268024831,1.585)); +#177117 = DIRECTION('',(0.,0.,-1.)); +#177118 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#177119 = ORIENTED_EDGE('',*,*,#177120,.T.); +#177120 = EDGE_CURVE('',#177112,#177121,#177123,.T.); +#177121 = VERTEX_POINT('',#177122); +#177122 = CARTESIAN_POINT('',(112.199172,-96.238661,1.585)); +#177123 = LINE('',#177124,#177125); +#177124 = CARTESIAN_POINT('',(112.16016,-96.199648,1.585)); +#177125 = VECTOR('',#177126,1.); +#177126 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#177127 = ORIENTED_EDGE('',*,*,#177128,.T.); +#177128 = EDGE_CURVE('',#177121,#177129,#177131,.T.); +#177129 = VERTEX_POINT('',#177130); +#177130 = CARTESIAN_POINT('',(112.586507,-96.238661,1.585)); +#177131 = CIRCLE('',#177132,0.358502380266); +#177132 = AXIS2_PLACEMENT_3D('',#177133,#177134,#177135); +#177133 = CARTESIAN_POINT('',(112.3928395,-95.936971,1.585)); +#177134 = DIRECTION('',(0.,0.,1.)); +#177135 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#177136 = ORIENTED_EDGE('',*,*,#177137,.T.); +#177137 = EDGE_CURVE('',#177129,#177138,#177140,.T.); +#177138 = VERTEX_POINT('',#177139); +#177139 = CARTESIAN_POINT('',(112.616914,-96.208253,1.585)); +#177140 = LINE('',#177141,#177142); +#177141 = CARTESIAN_POINT('',(112.586507,-96.238661,1.585)); +#177142 = VECTOR('',#177143,1.); +#177143 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#177144 = ORIENTED_EDGE('',*,*,#177145,.T.); +#177145 = EDGE_CURVE('',#177138,#177146,#177148,.T.); +#177146 = VERTEX_POINT('',#177147); +#177147 = CARTESIAN_POINT('',(112.616915,-95.868536,1.585)); +#177148 = CIRCLE('',#177149,0.305616146029); +#177149 = AXIS2_PLACEMENT_3D('',#177150,#177151,#177152); +#177150 = CARTESIAN_POINT('',(112.36284892049,-96.03839375212,1.585)); +#177151 = DIRECTION('',(0.,-0.,1.)); +#177152 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#177153 = ORIENTED_EDGE('',*,*,#177154,.T.); +#177154 = EDGE_CURVE('',#177146,#177155,#177157,.T.); +#177155 = VERTEX_POINT('',#177156); +#177156 = CARTESIAN_POINT('',(112.586508,-95.838129,1.585)); +#177157 = LINE('',#177158,#177159); +#177158 = CARTESIAN_POINT('',(112.616915,-95.868536,1.585)); +#177159 = VECTOR('',#177160,1.); +#177160 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#177161 = ORIENTED_EDGE('',*,*,#177162,.T.); +#177162 = EDGE_CURVE('',#177155,#177163,#177165,.T.); +#177163 = VERTEX_POINT('',#177164); +#177164 = CARTESIAN_POINT('',(112.517992,-95.803871,1.585)); +#177165 = LINE('',#177166,#177167); +#177166 = CARTESIAN_POINT('',(112.586508,-95.838129,1.585)); +#177167 = VECTOR('',#177168,1.); +#177168 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#177169 = ORIENTED_EDGE('',*,*,#177170,.T.); +#177170 = EDGE_CURVE('',#177163,#177171,#177173,.T.); +#177171 = VERTEX_POINT('',#177172); +#177172 = CARTESIAN_POINT('',(112.378208,-95.80243,1.585)); +#177173 = LINE('',#177174,#177175); +#177174 = CARTESIAN_POINT('',(112.517992,-95.803871,1.585)); +#177175 = VECTOR('',#177176,1.); +#177176 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#177177 = ORIENTED_EDGE('',*,*,#177178,.T.); +#177178 = EDGE_CURVE('',#177171,#177179,#177181,.T.); +#177179 = VERTEX_POINT('',#177180); +#177180 = CARTESIAN_POINT('',(112.336397,-95.679483,1.585)); +#177181 = CIRCLE('',#177182,7.500015628755E-02); +#177182 = AXIS2_PLACEMENT_3D('',#177183,#177184,#177185); +#177183 = CARTESIAN_POINT('',(112.39284028432,-95.7288710461,1.585)); +#177184 = DIRECTION('',(0.,0.,-1.)); +#177185 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#177186 = ORIENTED_EDGE('',*,*,#177187,.T.); +#177187 = EDGE_CURVE('',#177179,#177188,#177190,.T.); +#177188 = VERTEX_POINT('',#177189); +#177189 = CARTESIAN_POINT('',(112.560891,-95.422919,1.585)); +#177190 = LINE('',#177191,#177192); +#177191 = CARTESIAN_POINT('',(112.336397,-95.679483,1.585)); +#177192 = VECTOR('',#177193,1.); +#177193 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#177194 = ORIENTED_EDGE('',*,*,#177195,.T.); +#177195 = EDGE_CURVE('',#177188,#177018,#177196,.T.); +#177196 = LINE('',#177197,#177198); +#177197 = CARTESIAN_POINT('',(112.560891,-95.422919,1.585)); +#177198 = VECTOR('',#177199,1.); +#177199 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#177200 = PLANE('',#177201); +#177201 = AXIS2_PLACEMENT_3D('',#177202,#177203,#177204); +#177202 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177203 = DIRECTION('',(0.,0.,1.)); +#177204 = DIRECTION('',(1.,0.,-0.)); +#177205 = SHELL_BASED_SURFACE_MODEL('',(#177206)); +#177206 = OPEN_SHELL('',(#177207)); +#177207 = ADVANCED_FACE('',(#177208,#177261),#177287,.T.); +#177208 = FACE_BOUND('',#177209,.F.); +#177209 = EDGE_LOOP('',(#177210,#177221,#177229,#177238,#177246,#177255) + ); +#177210 = ORIENTED_EDGE('',*,*,#177211,.T.); +#177211 = EDGE_CURVE('',#177212,#177214,#177216,.T.); +#177212 = VERTEX_POINT('',#177213); +#177213 = CARTESIAN_POINT('',(140.149224,-95.980674,1.585)); +#177214 = VERTEX_POINT('',#177215); +#177215 = CARTESIAN_POINT('',(140.234076,-95.980674,1.585)); +#177216 = CIRCLE('',#177217,5.999686798802E-02); +#177217 = AXIS2_PLACEMENT_3D('',#177218,#177219,#177220); +#177218 = CARTESIAN_POINT('',(140.19165,-96.02309638433,1.585)); +#177219 = DIRECTION('',(0.,0.,-1.)); +#177220 = DIRECTION('',(-0.707136912688,0.707076648401,0.)); +#177221 = ORIENTED_EDGE('',*,*,#177222,.T.); +#177222 = EDGE_CURVE('',#177214,#177223,#177225,.T.); +#177223 = VERTEX_POINT('',#177224); +#177224 = CARTESIAN_POINT('',(140.534076,-96.280674,1.585)); +#177225 = LINE('',#177226,#177227); +#177226 = CARTESIAN_POINT('',(140.234076,-95.980674,1.585)); +#177227 = VECTOR('',#177228,1.); +#177228 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#177229 = ORIENTED_EDGE('',*,*,#177230,.T.); +#177230 = EDGE_CURVE('',#177223,#177231,#177233,.T.); +#177231 = VERTEX_POINT('',#177232); +#177232 = CARTESIAN_POINT('',(140.49165,-96.3831,1.585)); +#177233 = CIRCLE('',#177234,5.999940475497E-02); +#177234 = AXIS2_PLACEMENT_3D('',#177235,#177236,#177237); +#177235 = CARTESIAN_POINT('',(140.49165062331,-96.32310059524,1.585)); +#177236 = DIRECTION('',(0.,0.,-1.)); +#177237 = DIRECTION('',(0.707096626292,0.707116935935,0.)); +#177238 = ORIENTED_EDGE('',*,*,#177239,.T.); +#177239 = EDGE_CURVE('',#177231,#177240,#177242,.T.); +#177240 = VERTEX_POINT('',#177241); +#177241 = CARTESIAN_POINT('',(139.89165,-96.3831,1.585)); +#177242 = LINE('',#177243,#177244); +#177243 = CARTESIAN_POINT('',(140.49165,-96.3831,1.585)); +#177244 = VECTOR('',#177245,1.); +#177245 = DIRECTION('',(-1.,0.,0.)); +#177246 = ORIENTED_EDGE('',*,*,#177247,.T.); +#177247 = EDGE_CURVE('',#177240,#177248,#177250,.T.); +#177248 = VERTEX_POINT('',#177249); +#177249 = CARTESIAN_POINT('',(139.849224,-96.280674,1.585)); +#177250 = CIRCLE('',#177251,5.999940475496E-02); +#177251 = AXIS2_PLACEMENT_3D('',#177252,#177253,#177254); +#177252 = CARTESIAN_POINT('',(139.89164937668,-96.32310059524,1.585)); +#177253 = DIRECTION('',(0.,0.,-1.)); +#177254 = DIRECTION('',(1.038874045148E-05,-0.999999999946,0.)); +#177255 = ORIENTED_EDGE('',*,*,#177256,.T.); +#177256 = EDGE_CURVE('',#177248,#177212,#177257,.T.); +#177257 = LINE('',#177258,#177259); +#177258 = CARTESIAN_POINT('',(139.849224,-96.280674,1.585)); +#177259 = VECTOR('',#177260,1.); +#177260 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#177261 = FACE_BOUND('',#177262,.F.); +#177262 = EDGE_LOOP('',(#177263,#177273,#177281)); +#177263 = ORIENTED_EDGE('',*,*,#177264,.T.); +#177264 = EDGE_CURVE('',#177265,#177267,#177269,.T.); +#177265 = VERTEX_POINT('',#177266); +#177266 = CARTESIAN_POINT('',(140.036502,-96.2631,1.585)); +#177267 = VERTEX_POINT('',#177268); +#177268 = CARTESIAN_POINT('',(140.346798,-96.2631,1.585)); +#177269 = LINE('',#177270,#177271); +#177270 = CARTESIAN_POINT('',(140.036502,-96.2631,1.585)); +#177271 = VECTOR('',#177272,1.); +#177272 = DIRECTION('',(1.,0.,0.)); +#177273 = ORIENTED_EDGE('',*,*,#177274,.T.); +#177274 = EDGE_CURVE('',#177267,#177275,#177277,.T.); +#177275 = VERTEX_POINT('',#177276); +#177276 = CARTESIAN_POINT('',(140.19165,-96.107952,1.585)); +#177277 = LINE('',#177278,#177279); +#177278 = CARTESIAN_POINT('',(140.346798,-96.2631,1.585)); +#177279 = VECTOR('',#177280,1.); +#177280 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#177281 = ORIENTED_EDGE('',*,*,#177282,.T.); +#177282 = EDGE_CURVE('',#177275,#177265,#177283,.T.); +#177283 = LINE('',#177284,#177285); +#177284 = CARTESIAN_POINT('',(140.19165,-96.107952,1.585)); +#177285 = VECTOR('',#177286,1.); +#177286 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#177287 = PLANE('',#177288); +#177288 = AXIS2_PLACEMENT_3D('',#177289,#177290,#177291); +#177289 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177290 = DIRECTION('',(0.,0.,1.)); +#177291 = DIRECTION('',(1.,0.,-0.)); +#177292 = SHELL_BASED_SURFACE_MODEL('',(#177293)); +#177293 = OPEN_SHELL('',(#177294)); +#177294 = ADVANCED_FACE('',(#177295),#177355,.T.); +#177295 = FACE_BOUND('',#177296,.F.); +#177296 = EDGE_LOOP('',(#177297,#177308,#177316,#177324,#177332,#177340, + #177349)); +#177297 = ORIENTED_EDGE('',*,*,#177298,.T.); +#177298 = EDGE_CURVE('',#177299,#177301,#177303,.T.); +#177299 = VERTEX_POINT('',#177300); +#177300 = CARTESIAN_POINT('',(104.65165,-96.3331,1.585)); +#177301 = VERTEX_POINT('',#177302); +#177302 = CARTESIAN_POINT('',(104.603126,-96.23781,1.585)); +#177303 = CIRCLE('',#177304,6.000027696174E-02); +#177304 = AXIS2_PLACEMENT_3D('',#177305,#177306,#177307); +#177305 = CARTESIAN_POINT('',(104.65165092846,-96.27309972304,1.585)); +#177306 = DIRECTION('',(0.,0.,-1.)); +#177307 = DIRECTION('',(-1.547440135436E-05,-0.99999999988,-0.)); +#177308 = ORIENTED_EDGE('',*,*,#177309,.T.); +#177309 = EDGE_CURVE('',#177301,#177310,#177312,.T.); +#177310 = VERTEX_POINT('',#177311); +#177311 = CARTESIAN_POINT('',(104.843126,-95.90781,1.585)); +#177312 = LINE('',#177313,#177314); +#177313 = CARTESIAN_POINT('',(104.603126,-96.23781,1.585)); +#177314 = VECTOR('',#177315,1.); +#177315 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#177316 = ORIENTED_EDGE('',*,*,#177317,.T.); +#177317 = EDGE_CURVE('',#177310,#177318,#177320,.T.); +#177318 = VERTEX_POINT('',#177319); +#177319 = CARTESIAN_POINT('',(104.882292,-95.883834,1.585)); +#177320 = LINE('',#177321,#177322); +#177321 = CARTESIAN_POINT('',(104.843126,-95.90781,1.585)); +#177322 = VECTOR('',#177323,1.); +#177323 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#177324 = ORIENTED_EDGE('',*,*,#177325,.T.); +#177325 = EDGE_CURVE('',#177318,#177326,#177328,.T.); +#177326 = VERTEX_POINT('',#177327); +#177327 = CARTESIAN_POINT('',(104.92694,-95.894576,1.585)); +#177328 = LINE('',#177329,#177330); +#177329 = CARTESIAN_POINT('',(104.882292,-95.883834,1.585)); +#177330 = VECTOR('',#177331,1.); +#177331 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#177332 = ORIENTED_EDGE('',*,*,#177333,.T.); +#177333 = EDGE_CURVE('',#177326,#177334,#177336,.T.); +#177334 = VERTEX_POINT('',#177335); +#177335 = CARTESIAN_POINT('',(105.180174,-96.23781,1.585)); +#177336 = LINE('',#177337,#177338); +#177337 = CARTESIAN_POINT('',(104.92694,-95.894576,1.585)); +#177338 = VECTOR('',#177339,1.); +#177339 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#177340 = ORIENTED_EDGE('',*,*,#177341,.T.); +#177341 = EDGE_CURVE('',#177334,#177342,#177344,.T.); +#177342 = VERTEX_POINT('',#177343); +#177343 = CARTESIAN_POINT('',(105.13165,-96.3331,1.585)); +#177344 = CIRCLE('',#177345,5.999941814204E-02); +#177345 = AXIS2_PLACEMENT_3D('',#177346,#177347,#177348); +#177346 = CARTESIAN_POINT('',(105.13165075805,-96.27310058186,1.585)); +#177347 = DIRECTION('',(0.,0.,-1.)); +#177348 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#177349 = ORIENTED_EDGE('',*,*,#177350,.T.); +#177350 = EDGE_CURVE('',#177342,#177299,#177351,.T.); +#177351 = LINE('',#177352,#177353); +#177352 = CARTESIAN_POINT('',(105.13165,-96.3331,1.585)); +#177353 = VECTOR('',#177354,1.); +#177354 = DIRECTION('',(-1.,0.,0.)); +#177355 = PLANE('',#177356); +#177356 = AXIS2_PLACEMENT_3D('',#177357,#177358,#177359); +#177357 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177358 = DIRECTION('',(0.,0.,1.)); +#177359 = DIRECTION('',(1.,0.,-0.)); +#177360 = SHELL_BASED_SURFACE_MODEL('',(#177361)); +#177361 = OPEN_SHELL('',(#177362)); +#177362 = ADVANCED_FACE('',(#177363),#177399,.T.); +#177363 = FACE_BOUND('',#177364,.F.); +#177364 = EDGE_LOOP('',(#177365,#177376,#177384,#177393)); +#177365 = ORIENTED_EDGE('',*,*,#177366,.T.); +#177366 = EDGE_CURVE('',#177367,#177369,#177371,.T.); +#177367 = VERTEX_POINT('',#177368); +#177368 = CARTESIAN_POINT('',(134.629392,-95.9056,1.585)); +#177369 = VERTEX_POINT('',#177370); +#177370 = CARTESIAN_POINT('',(134.629392,-95.7856,1.585)); +#177371 = CIRCLE('',#177372,6.000000000043E-02); +#177372 = AXIS2_PLACEMENT_3D('',#177373,#177374,#177375); +#177373 = CARTESIAN_POINT('',(134.62939177441,-95.8456,1.585)); +#177374 = DIRECTION('',(0.,0.,-1.)); +#177375 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#177376 = ORIENTED_EDGE('',*,*,#177377,.T.); +#177377 = EDGE_CURVE('',#177369,#177378,#177380,.T.); +#177378 = VERTEX_POINT('',#177379); +#177379 = CARTESIAN_POINT('',(135.103908,-95.7856,1.585)); +#177380 = LINE('',#177381,#177382); +#177381 = CARTESIAN_POINT('',(134.629392,-95.7856,1.585)); +#177382 = VECTOR('',#177383,1.); +#177383 = DIRECTION('',(1.,0.,0.)); +#177384 = ORIENTED_EDGE('',*,*,#177385,.T.); +#177385 = EDGE_CURVE('',#177378,#177386,#177388,.T.); +#177386 = VERTEX_POINT('',#177387); +#177387 = CARTESIAN_POINT('',(135.103908,-95.9056,1.585)); +#177388 = CIRCLE('',#177389,6.000000000043E-02); +#177389 = AXIS2_PLACEMENT_3D('',#177390,#177391,#177392); +#177390 = CARTESIAN_POINT('',(135.10390822558,-95.8456,1.585)); +#177391 = DIRECTION('',(0.,0.,-1.)); +#177392 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#177393 = ORIENTED_EDGE('',*,*,#177394,.T.); +#177394 = EDGE_CURVE('',#177386,#177367,#177395,.T.); +#177395 = LINE('',#177396,#177397); +#177396 = CARTESIAN_POINT('',(135.103908,-95.9056,1.585)); +#177397 = VECTOR('',#177398,1.); +#177398 = DIRECTION('',(-1.,0.,0.)); +#177399 = PLANE('',#177400); +#177400 = AXIS2_PLACEMENT_3D('',#177401,#177402,#177403); +#177401 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177402 = DIRECTION('',(0.,0.,1.)); +#177403 = DIRECTION('',(1.,0.,-0.)); +#177404 = SHELL_BASED_SURFACE_MODEL('',(#177405)); +#177405 = OPEN_SHELL('',(#177406)); +#177406 = ADVANCED_FACE('',(#177407,#177541),#177619,.T.); +#177407 = FACE_BOUND('',#177408,.F.); +#177408 = EDGE_LOOP('',(#177409,#177419,#177427,#177435,#177443,#177452, + #177460,#177469,#177477,#177485,#177493,#177501,#177509,#177518, + #177526,#177535)); +#177409 = ORIENTED_EDGE('',*,*,#177410,.T.); +#177410 = EDGE_CURVE('',#177411,#177413,#177415,.T.); +#177411 = VERTEX_POINT('',#177412); +#177412 = CARTESIAN_POINT('',(139.968689,-93.767667,1.585)); +#177413 = VERTEX_POINT('',#177414); +#177414 = CARTESIAN_POINT('',(139.99165,-93.7631,1.585)); +#177415 = LINE('',#177416,#177417); +#177416 = CARTESIAN_POINT('',(139.968689,-93.767667,1.585)); +#177417 = VECTOR('',#177418,1.); +#177418 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#177419 = ORIENTED_EDGE('',*,*,#177420,.T.); +#177420 = EDGE_CURVE('',#177413,#177421,#177423,.T.); +#177421 = VERTEX_POINT('',#177422); +#177422 = CARTESIAN_POINT('',(142.79165,-93.7631,1.585)); +#177423 = LINE('',#177424,#177425); +#177424 = CARTESIAN_POINT('',(139.99165,-93.7631,1.585)); +#177425 = VECTOR('',#177426,1.); +#177426 = DIRECTION('',(1.,0.,0.)); +#177427 = ORIENTED_EDGE('',*,*,#177428,.T.); +#177428 = EDGE_CURVE('',#177421,#177429,#177431,.T.); +#177429 = VERTEX_POINT('',#177430); +#177430 = CARTESIAN_POINT('',(142.814611,-93.767667,1.585)); +#177431 = LINE('',#177432,#177433); +#177432 = CARTESIAN_POINT('',(142.79165,-93.7631,1.585)); +#177433 = VECTOR('',#177434,1.); +#177434 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#177435 = ORIENTED_EDGE('',*,*,#177436,.T.); +#177436 = EDGE_CURVE('',#177429,#177437,#177439,.T.); +#177437 = VERTEX_POINT('',#177438); +#177438 = CARTESIAN_POINT('',(142.889919,-93.777703,1.585)); +#177439 = LINE('',#177440,#177441); +#177440 = CARTESIAN_POINT('',(142.814611,-93.767667,1.585)); +#177441 = VECTOR('',#177442,1.); +#177442 = DIRECTION('',(0.991236635155,-0.132098195018,0.)); +#177443 = ORIENTED_EDGE('',*,*,#177444,.T.); +#177444 = EDGE_CURVE('',#177437,#177445,#177447,.T.); +#177445 = VERTEX_POINT('',#177446); +#177446 = CARTESIAN_POINT('',(143.50165,-94.5231,1.585)); +#177447 = CIRCLE('',#177448,0.760001389949); +#177448 = AXIS2_PLACEMENT_3D('',#177449,#177450,#177451); +#177449 = CARTESIAN_POINT('',(142.74164861005,-94.52310088314,1.585)); +#177450 = DIRECTION('',(0.,0.,-1.)); +#177451 = DIRECTION('',(0.195092261553,0.980784894603,0.)); +#177452 = ORIENTED_EDGE('',*,*,#177453,.T.); +#177453 = EDGE_CURVE('',#177445,#177454,#177456,.T.); +#177454 = VERTEX_POINT('',#177455); +#177455 = CARTESIAN_POINT('',(143.50165,-95.1231,1.585)); +#177456 = LINE('',#177457,#177458); +#177457 = CARTESIAN_POINT('',(143.50165,-94.5231,1.585)); +#177458 = VECTOR('',#177459,1.); +#177459 = DIRECTION('',(0.,-1.,0.)); +#177460 = ORIENTED_EDGE('',*,*,#177461,.T.); +#177461 = EDGE_CURVE('',#177454,#177462,#177464,.T.); +#177462 = VERTEX_POINT('',#177463); +#177463 = CARTESIAN_POINT('',(142.889919,-95.868497,1.585)); +#177464 = CIRCLE('',#177465,0.759999019977); +#177465 = AXIS2_PLACEMENT_3D('',#177466,#177467,#177468); +#177466 = CARTESIAN_POINT('',(142.74165098002,-95.12310106184,1.585)); +#177467 = DIRECTION('',(0.,0.,-1.)); +#177468 = DIRECTION('',(0.999999999999,1.397165543076E-06,0.)); +#177469 = ORIENTED_EDGE('',*,*,#177470,.T.); +#177470 = EDGE_CURVE('',#177462,#177471,#177473,.T.); +#177471 = VERTEX_POINT('',#177472); +#177472 = CARTESIAN_POINT('',(142.814611,-95.878533,1.585)); +#177473 = LINE('',#177474,#177475); +#177474 = CARTESIAN_POINT('',(142.889919,-95.868497,1.585)); +#177475 = VECTOR('',#177476,1.); +#177476 = DIRECTION('',(-0.991236635155,-0.132098195018,0.)); +#177477 = ORIENTED_EDGE('',*,*,#177478,.T.); +#177478 = EDGE_CURVE('',#177471,#177479,#177481,.T.); +#177479 = VERTEX_POINT('',#177480); +#177480 = CARTESIAN_POINT('',(142.79165,-95.8831,1.585)); +#177481 = LINE('',#177482,#177483); +#177482 = CARTESIAN_POINT('',(142.814611,-95.878533,1.585)); +#177483 = VECTOR('',#177484,1.); +#177484 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#177485 = ORIENTED_EDGE('',*,*,#177486,.T.); +#177486 = EDGE_CURVE('',#177479,#177487,#177489,.T.); +#177487 = VERTEX_POINT('',#177488); +#177488 = CARTESIAN_POINT('',(139.99165,-95.8831,1.585)); +#177489 = LINE('',#177490,#177491); +#177490 = CARTESIAN_POINT('',(142.79165,-95.8831,1.585)); +#177491 = VECTOR('',#177492,1.); +#177492 = DIRECTION('',(-1.,0.,0.)); +#177493 = ORIENTED_EDGE('',*,*,#177494,.T.); +#177494 = EDGE_CURVE('',#177487,#177495,#177497,.T.); +#177495 = VERTEX_POINT('',#177496); +#177496 = CARTESIAN_POINT('',(139.965783,-95.875627,1.585)); +#177497 = LINE('',#177498,#177499); +#177498 = CARTESIAN_POINT('',(139.99165,-95.8831,1.585)); +#177499 = VECTOR('',#177500,1.); +#177500 = DIRECTION('',(-0.960711101854,0.277550317554,0.)); +#177501 = ORIENTED_EDGE('',*,*,#177502,.T.); +#177502 = EDGE_CURVE('',#177495,#177503,#177505,.T.); +#177503 = VERTEX_POINT('',#177504); +#177504 = CARTESIAN_POINT('',(139.893381,-95.868497,1.585)); +#177505 = LINE('',#177506,#177507); +#177506 = CARTESIAN_POINT('',(139.965783,-95.875627,1.585)); +#177507 = VECTOR('',#177508,1.); +#177508 = DIRECTION('',(-0.995186033295,9.800387306128E-02,0.)); +#177509 = ORIENTED_EDGE('',*,*,#177510,.T.); +#177510 = EDGE_CURVE('',#177503,#177511,#177513,.T.); +#177511 = VERTEX_POINT('',#177512); +#177512 = CARTESIAN_POINT('',(139.28165,-95.1231,1.585)); +#177513 = CIRCLE('',#177514,0.760001389949); +#177514 = AXIS2_PLACEMENT_3D('',#177515,#177516,#177517); +#177515 = CARTESIAN_POINT('',(140.04165138994,-95.12309911686,1.585)); +#177516 = DIRECTION('',(0.,0.,-1.)); +#177517 = DIRECTION('',(-0.195092261553,-0.980784894603,-0.)); +#177518 = ORIENTED_EDGE('',*,*,#177519,.T.); +#177519 = EDGE_CURVE('',#177511,#177520,#177522,.T.); +#177520 = VERTEX_POINT('',#177521); +#177521 = CARTESIAN_POINT('',(139.28165,-94.5231,1.585)); +#177522 = LINE('',#177523,#177524); +#177523 = CARTESIAN_POINT('',(139.28165,-95.1231,1.585)); +#177524 = VECTOR('',#177525,1.); +#177525 = DIRECTION('',(0.,1.,0.)); +#177526 = ORIENTED_EDGE('',*,*,#177527,.T.); +#177527 = EDGE_CURVE('',#177520,#177528,#177530,.T.); +#177528 = VERTEX_POINT('',#177529); +#177529 = CARTESIAN_POINT('',(139.893381,-93.777703,1.585)); +#177530 = CIRCLE('',#177531,0.759999019977); +#177531 = AXIS2_PLACEMENT_3D('',#177532,#177533,#177534); +#177532 = CARTESIAN_POINT('',(140.04164901997,-94.52309893815,1.585)); +#177533 = DIRECTION('',(0.,0.,-1.)); +#177534 = DIRECTION('',(-0.999999999999,-1.397165636569E-06,-0.)); +#177535 = ORIENTED_EDGE('',*,*,#177536,.T.); +#177536 = EDGE_CURVE('',#177528,#177411,#177537,.T.); +#177537 = LINE('',#177538,#177539); +#177538 = CARTESIAN_POINT('',(139.893381,-93.777703,1.585)); +#177539 = VECTOR('',#177540,1.); +#177540 = DIRECTION('',(0.991236635155,0.132098195018,0.)); +#177541 = FACE_BOUND('',#177542,.F.); +#177542 = EDGE_LOOP('',(#177543,#177554,#177562,#177570,#177579,#177587, + #177596,#177604,#177613)); +#177543 = ORIENTED_EDGE('',*,*,#177544,.T.); +#177544 = EDGE_CURVE('',#177545,#177547,#177549,.T.); +#177545 = VERTEX_POINT('',#177546); +#177546 = CARTESIAN_POINT('',(143.38165,-94.450989,1.585)); +#177547 = VERTEX_POINT('',#177548); +#177548 = CARTESIAN_POINT('',(142.813761,-93.8831,1.585)); +#177549 = CIRCLE('',#177550,0.64404917508); +#177550 = AXIS2_PLACEMENT_3D('',#177551,#177552,#177553); +#177551 = CARTESIAN_POINT('',(142.74165046088,-94.52309953911,1.585)); +#177552 = DIRECTION('',(0.,0.,1.)); +#177553 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#177554 = ORIENTED_EDGE('',*,*,#177555,.T.); +#177555 = EDGE_CURVE('',#177547,#177556,#177558,.T.); +#177556 = VERTEX_POINT('',#177557); +#177557 = CARTESIAN_POINT('',(140.04165,-93.8831,1.585)); +#177558 = LINE('',#177559,#177560); +#177559 = CARTESIAN_POINT('',(142.813761,-93.8831,1.585)); +#177560 = VECTOR('',#177561,1.); +#177561 = DIRECTION('',(-1.,0.,0.)); +#177562 = ORIENTED_EDGE('',*,*,#177563,.T.); +#177563 = EDGE_CURVE('',#177556,#177564,#177566,.T.); +#177564 = VERTEX_POINT('',#177565); +#177565 = CARTESIAN_POINT('',(139.969539,-93.8831,1.585)); +#177566 = LINE('',#177567,#177568); +#177567 = CARTESIAN_POINT('',(140.04165,-93.8831,1.585)); +#177568 = VECTOR('',#177569,1.); +#177569 = DIRECTION('',(-1.,0.,0.)); +#177570 = ORIENTED_EDGE('',*,*,#177571,.T.); +#177571 = EDGE_CURVE('',#177564,#177572,#177574,.T.); +#177572 = VERTEX_POINT('',#177573); +#177573 = CARTESIAN_POINT('',(139.40165,-94.450989,1.585)); +#177574 = CIRCLE('',#177575,0.64404917508); +#177575 = AXIS2_PLACEMENT_3D('',#177576,#177577,#177578); +#177576 = CARTESIAN_POINT('',(140.04164953911,-94.52309953911,1.585)); +#177577 = DIRECTION('',(0.,0.,1.)); +#177578 = DIRECTION('',(-0.111964337363,0.993712225526,0.)); +#177579 = ORIENTED_EDGE('',*,*,#177580,.T.); +#177580 = EDGE_CURVE('',#177572,#177581,#177583,.T.); +#177581 = VERTEX_POINT('',#177582); +#177582 = CARTESIAN_POINT('',(139.40165,-95.195211,1.585)); +#177583 = LINE('',#177584,#177585); +#177584 = CARTESIAN_POINT('',(139.40165,-94.450989,1.585)); +#177585 = VECTOR('',#177586,1.); +#177586 = DIRECTION('',(0.,-1.,0.)); +#177587 = ORIENTED_EDGE('',*,*,#177588,.T.); +#177588 = EDGE_CURVE('',#177581,#177589,#177591,.T.); +#177589 = VERTEX_POINT('',#177590); +#177590 = CARTESIAN_POINT('',(139.969539,-95.7631,1.585)); +#177591 = CIRCLE('',#177592,0.64404917508); +#177592 = AXIS2_PLACEMENT_3D('',#177593,#177594,#177595); +#177593 = CARTESIAN_POINT('',(140.04164953911,-95.12310046088,1.585)); +#177594 = DIRECTION('',(0.,0.,1.)); +#177595 = DIRECTION('',(-0.993712225526,-0.111964337363,0.)); +#177596 = ORIENTED_EDGE('',*,*,#177597,.T.); +#177597 = EDGE_CURVE('',#177589,#177598,#177600,.T.); +#177598 = VERTEX_POINT('',#177599); +#177599 = CARTESIAN_POINT('',(142.813761,-95.7631,1.585)); +#177600 = LINE('',#177601,#177602); +#177601 = CARTESIAN_POINT('',(139.969539,-95.7631,1.585)); +#177602 = VECTOR('',#177603,1.); +#177603 = DIRECTION('',(1.,0.,0.)); +#177604 = ORIENTED_EDGE('',*,*,#177605,.T.); +#177605 = EDGE_CURVE('',#177598,#177606,#177608,.T.); +#177606 = VERTEX_POINT('',#177607); +#177607 = CARTESIAN_POINT('',(143.38165,-95.195211,1.585)); +#177608 = CIRCLE('',#177609,0.64404917508); +#177609 = AXIS2_PLACEMENT_3D('',#177610,#177611,#177612); +#177610 = CARTESIAN_POINT('',(142.74165046088,-95.12310046088,1.585)); +#177611 = DIRECTION('',(0.,0.,1.)); +#177612 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#177613 = ORIENTED_EDGE('',*,*,#177614,.T.); +#177614 = EDGE_CURVE('',#177606,#177545,#177615,.T.); +#177615 = LINE('',#177616,#177617); +#177616 = CARTESIAN_POINT('',(143.38165,-95.195211,1.585)); +#177617 = VECTOR('',#177618,1.); +#177618 = DIRECTION('',(0.,1.,0.)); +#177619 = PLANE('',#177620); +#177620 = AXIS2_PLACEMENT_3D('',#177621,#177622,#177623); +#177621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177622 = DIRECTION('',(0.,0.,1.)); +#177623 = DIRECTION('',(1.,0.,-0.)); +#177624 = SHELL_BASED_SURFACE_MODEL('',(#177625)); +#177625 = OPEN_SHELL('',(#177626)); +#177626 = ADVANCED_FACE('',(#177627),#177713,.T.); +#177627 = FACE_BOUND('',#177628,.F.); +#177628 = EDGE_LOOP('',(#177629,#177640,#177648,#177657,#177665,#177674, + #177682,#177690,#177698,#177707)); +#177629 = ORIENTED_EDGE('',*,*,#177630,.T.); +#177630 = EDGE_CURVE('',#177631,#177633,#177635,.T.); +#177631 = VERTEX_POINT('',#177632); +#177632 = CARTESIAN_POINT('',(105.37165,-94.7631,1.585)); +#177633 = VERTEX_POINT('',#177634); +#177634 = CARTESIAN_POINT('',(105.43165,-94.7031,1.585)); +#177635 = CIRCLE('',#177636,5.999932016258E-02); +#177636 = AXIS2_PLACEMENT_3D('',#177637,#177638,#177639); +#177637 = CARTESIAN_POINT('',(105.43164932015,-94.76309932015,1.585)); +#177638 = DIRECTION('',(0.,0.,-1.)); +#177639 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#177640 = ORIENTED_EDGE('',*,*,#177641,.T.); +#177641 = EDGE_CURVE('',#177633,#177642,#177644,.T.); +#177642 = VERTEX_POINT('',#177643); +#177643 = CARTESIAN_POINT('',(106.95165,-94.7031,1.585)); +#177644 = LINE('',#177645,#177646); +#177645 = CARTESIAN_POINT('',(105.43165,-94.7031,1.585)); +#177646 = VECTOR('',#177647,1.); +#177647 = DIRECTION('',(1.,0.,0.)); +#177648 = ORIENTED_EDGE('',*,*,#177649,.T.); +#177649 = EDGE_CURVE('',#177642,#177650,#177652,.T.); +#177650 = VERTEX_POINT('',#177651); +#177651 = CARTESIAN_POINT('',(107.01165,-94.7631,1.585)); +#177652 = CIRCLE('',#177653,5.999932016258E-02); +#177653 = AXIS2_PLACEMENT_3D('',#177654,#177655,#177656); +#177654 = CARTESIAN_POINT('',(106.95165067984,-94.76309932015,1.585)); +#177655 = DIRECTION('',(0.,0.,-1.)); +#177656 = DIRECTION('',(-1.133081635828E-05,0.999999999936,0.)); +#177657 = ORIENTED_EDGE('',*,*,#177658,.T.); +#177658 = EDGE_CURVE('',#177650,#177659,#177661,.T.); +#177659 = VERTEX_POINT('',#177660); +#177660 = CARTESIAN_POINT('',(107.01165,-95.7631,1.585)); +#177661 = LINE('',#177662,#177663); +#177662 = CARTESIAN_POINT('',(107.01165,-94.7631,1.585)); +#177663 = VECTOR('',#177664,1.); +#177664 = DIRECTION('',(0.,-1.,0.)); +#177665 = ORIENTED_EDGE('',*,*,#177666,.T.); +#177666 = EDGE_CURVE('',#177659,#177667,#177669,.T.); +#177667 = VERTEX_POINT('',#177668); +#177668 = CARTESIAN_POINT('',(106.89165,-95.7631,1.585)); +#177669 = CIRCLE('',#177670,6.000000000042E-02); +#177670 = AXIS2_PLACEMENT_3D('',#177671,#177672,#177673); +#177671 = CARTESIAN_POINT('',(106.95165,-95.76310022558,1.585)); +#177672 = DIRECTION('',(0.,0.,-1.)); +#177673 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#177674 = ORIENTED_EDGE('',*,*,#177675,.T.); +#177675 = EDGE_CURVE('',#177667,#177676,#177678,.T.); +#177676 = VERTEX_POINT('',#177677); +#177677 = CARTESIAN_POINT('',(106.89165,-94.8231,1.585)); +#177678 = LINE('',#177679,#177680); +#177679 = CARTESIAN_POINT('',(106.89165,-95.7631,1.585)); +#177680 = VECTOR('',#177681,1.); +#177681 = DIRECTION('',(0.,1.,0.)); +#177682 = ORIENTED_EDGE('',*,*,#177683,.T.); +#177683 = EDGE_CURVE('',#177676,#177684,#177686,.T.); +#177684 = VERTEX_POINT('',#177685); +#177685 = CARTESIAN_POINT('',(105.489661,-94.8231,1.585)); +#177686 = LINE('',#177687,#177688); +#177687 = CARTESIAN_POINT('',(106.89165,-94.8231,1.585)); +#177688 = VECTOR('',#177689,1.); +#177689 = DIRECTION('',(-1.,0.,0.)); +#177690 = ORIENTED_EDGE('',*,*,#177691,.T.); +#177691 = EDGE_CURVE('',#177684,#177692,#177694,.T.); +#177692 = VERTEX_POINT('',#177693); +#177693 = CARTESIAN_POINT('',(105.487083,-94.836061,1.585)); +#177694 = LINE('',#177695,#177696); +#177695 = CARTESIAN_POINT('',(105.489661,-94.8231,1.585)); +#177696 = VECTOR('',#177697,1.); +#177697 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#177698 = ORIENTED_EDGE('',*,*,#177699,.T.); +#177699 = EDGE_CURVE('',#177692,#177700,#177702,.T.); +#177700 = VERTEX_POINT('',#177701); +#177701 = CARTESIAN_POINT('',(105.37165,-94.8131,1.585)); +#177702 = CIRCLE('',#177703,6.000007318647E-02); +#177703 = AXIS2_PLACEMENT_3D('',#177704,#177705,#177706); +#177704 = CARTESIAN_POINT('',(105.43165007318,-94.81310017668,1.585)); +#177705 = DIRECTION('',(-0.,0.,-1.)); +#177706 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#177707 = ORIENTED_EDGE('',*,*,#177708,.T.); +#177708 = EDGE_CURVE('',#177700,#177631,#177709,.T.); +#177709 = LINE('',#177710,#177711); +#177710 = CARTESIAN_POINT('',(105.37165,-94.8131,1.585)); +#177711 = VECTOR('',#177712,1.); +#177712 = DIRECTION('',(0.,1.,0.)); +#177713 = PLANE('',#177714); +#177714 = AXIS2_PLACEMENT_3D('',#177715,#177716,#177717); +#177715 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177716 = DIRECTION('',(0.,0.,1.)); +#177717 = DIRECTION('',(1.,0.,-0.)); +#177718 = SHELL_BASED_SURFACE_MODEL('',(#177719)); +#177719 = OPEN_SHELL('',(#177720)); +#177720 = ADVANCED_FACE('',(#177721,#177823),#177925,.T.); +#177721 = FACE_BOUND('',#177722,.F.); +#177722 = EDGE_LOOP('',(#177723,#177733,#177742,#177750,#177758,#177767, + #177775,#177783,#177792,#177800,#177808,#177817)); +#177723 = ORIENTED_EDGE('',*,*,#177724,.T.); +#177724 = EDGE_CURVE('',#177725,#177727,#177729,.T.); +#177725 = VERTEX_POINT('',#177726); +#177726 = CARTESIAN_POINT('',(180.881866,-95.093315,1.585)); +#177727 = VERTEX_POINT('',#177728); +#177728 = CARTESIAN_POINT('',(180.998755,-95.036053,1.585)); +#177729 = LINE('',#177730,#177731); +#177730 = CARTESIAN_POINT('',(180.881866,-95.093315,1.585)); +#177731 = VECTOR('',#177732,1.); +#177732 = DIRECTION('',(0.898031613354,0.439930928007,0.)); +#177733 = ORIENTED_EDGE('',*,*,#177734,.T.); +#177734 = EDGE_CURVE('',#177727,#177735,#177737,.T.); +#177735 = VERTEX_POINT('',#177736); +#177736 = CARTESIAN_POINT('',(181.669533,-95.041732,1.585)); +#177737 = CIRCLE('',#177738,0.965975843555); +#177738 = AXIS2_PLACEMENT_3D('',#177739,#177740,#177741); +#177739 = CARTESIAN_POINT('',(181.32647484794,-95.94473833145,1.585)); +#177740 = DIRECTION('',(0.,0.,-1.)); +#177741 = DIRECTION('',(-0.339262984817,0.940691568546,0.)); +#177742 = ORIENTED_EDGE('',*,*,#177743,.T.); +#177743 = EDGE_CURVE('',#177735,#177744,#177746,.T.); +#177744 = VERTEX_POINT('',#177745); +#177745 = CARTESIAN_POINT('',(181.778513,-95.098681,1.585)); +#177746 = LINE('',#177747,#177748); +#177747 = CARTESIAN_POINT('',(181.669533,-95.041732,1.585)); +#177748 = VECTOR('',#177749,1.); +#177749 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#177750 = ORIENTED_EDGE('',*,*,#177751,.T.); +#177751 = EDGE_CURVE('',#177744,#177752,#177754,.T.); +#177752 = VERTEX_POINT('',#177753); +#177753 = CARTESIAN_POINT('',(181.841967,-95.164211,1.585)); +#177754 = LINE('',#177755,#177756); +#177755 = CARTESIAN_POINT('',(181.778513,-95.098681,1.585)); +#177756 = VECTOR('',#177757,1.); +#177757 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#177758 = ORIENTED_EDGE('',*,*,#177759,.T.); +#177759 = EDGE_CURVE('',#177752,#177760,#177762,.T.); +#177760 = VERTEX_POINT('',#177761); +#177761 = CARTESIAN_POINT('',(181.8366,-95.53705,1.585)); +#177762 = CIRCLE('',#177763,0.290999070188); +#177763 = AXIS2_PLACEMENT_3D('',#177764,#177765,#177766); +#177764 = CARTESIAN_POINT('',(181.61587650487,-95.34741456673,1.585)); +#177765 = DIRECTION('',(0.,0.,-1.)); +#177766 = DIRECTION('',(0.776945764738,0.629567533038,0.)); +#177767 = ORIENTED_EDGE('',*,*,#177768,.T.); +#177768 = EDGE_CURVE('',#177760,#177769,#177771,.T.); +#177769 = VERTEX_POINT('',#177770); +#177770 = CARTESIAN_POINT('',(181.771067,-95.600503,1.585)); +#177771 = LINE('',#177772,#177773); +#177772 = CARTESIAN_POINT('',(181.8366,-95.53705,1.585)); +#177773 = VECTOR('',#177774,1.); +#177774 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#177775 = ORIENTED_EDGE('',*,*,#177776,.T.); +#177776 = EDGE_CURVE('',#177769,#177777,#177779,.T.); +#177777 = VERTEX_POINT('',#177778); +#177778 = CARTESIAN_POINT('',(181.654182,-95.657765,1.585)); +#177779 = LINE('',#177780,#177781); +#177780 = CARTESIAN_POINT('',(181.771067,-95.600503,1.585)); +#177781 = VECTOR('',#177782,1.); +#177782 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#177783 = ORIENTED_EDGE('',*,*,#177784,.T.); +#177784 = EDGE_CURVE('',#177777,#177785,#177787,.T.); +#177785 = VERTEX_POINT('',#177786); +#177786 = CARTESIAN_POINT('',(180.983404,-95.652086,1.585)); +#177787 = CIRCLE('',#177788,0.967158496826); +#177788 = AXIS2_PLACEMENT_3D('',#177789,#177790,#177791); +#177789 = CARTESIAN_POINT('',(181.32647282772,-94.74781870686,1.585)); +#177790 = DIRECTION('',(-0.,0.,-1.)); +#177791 = DIRECTION('',(0.338837091703,-0.940845059128,-0.)); +#177792 = ORIENTED_EDGE('',*,*,#177793,.T.); +#177793 = EDGE_CURVE('',#177785,#177794,#177796,.T.); +#177794 = VERTEX_POINT('',#177795); +#177795 = CARTESIAN_POINT('',(180.874423,-95.595136,1.585)); +#177796 = LINE('',#177797,#177798); +#177797 = CARTESIAN_POINT('',(180.983404,-95.652086,1.585)); +#177798 = VECTOR('',#177799,1.); +#177799 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#177800 = ORIENTED_EDGE('',*,*,#177801,.T.); +#177801 = EDGE_CURVE('',#177794,#177802,#177804,.T.); +#177802 = VERTEX_POINT('',#177803); +#177803 = CARTESIAN_POINT('',(180.81097,-95.529606,1.585)); +#177804 = LINE('',#177805,#177806); +#177805 = CARTESIAN_POINT('',(180.874423,-95.595136,1.585)); +#177806 = VECTOR('',#177807,1.); +#177807 = DIRECTION('',(-0.695630129574,0.718400113327,0.)); +#177808 = ORIENTED_EDGE('',*,*,#177809,.T.); +#177809 = EDGE_CURVE('',#177802,#177810,#177812,.T.); +#177810 = VERTEX_POINT('',#177811); +#177811 = CARTESIAN_POINT('',(180.816336,-95.156768,1.585)); +#177812 = CIRCLE('',#177813,0.291002094877); +#177813 = AXIS2_PLACEMENT_3D('',#177814,#177815,#177816); +#177814 = CARTESIAN_POINT('',(181.03706436573,-95.34640240558,1.585)); +#177815 = DIRECTION('',(0.,0.,-1.)); +#177816 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#177817 = ORIENTED_EDGE('',*,*,#177818,.T.); +#177818 = EDGE_CURVE('',#177810,#177725,#177819,.T.); +#177819 = LINE('',#177820,#177821); +#177820 = CARTESIAN_POINT('',(180.816336,-95.156768,1.585)); +#177821 = VECTOR('',#177822,1.); +#177822 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#177823 = FACE_BOUND('',#177824,.F.); +#177824 = EDGE_LOOP('',(#177825,#177836,#177844,#177852,#177861,#177869, + #177877,#177886,#177894,#177902,#177911,#177919)); +#177825 = ORIENTED_EDGE('',*,*,#177826,.T.); +#177826 = EDGE_CURVE('',#177827,#177829,#177831,.T.); +#177827 = VERTEX_POINT('',#177828); +#177828 = CARTESIAN_POINT('',(181.609816,-95.179578,1.585)); +#177829 = VERTEX_POINT('',#177830); +#177830 = CARTESIAN_POINT('',(181.043121,-95.179578,1.585)); +#177831 = CIRCLE('',#177832,0.815450468383); +#177832 = AXIS2_PLACEMENT_3D('',#177833,#177834,#177835); +#177833 = CARTESIAN_POINT('',(181.3264685,-95.94421756255,1.585)); +#177834 = DIRECTION('',(0.,0.,1.)); +#177835 = DIRECTION('',(0.347473587895,0.937689770508,-0.)); +#177836 = ORIENTED_EDGE('',*,*,#177837,.T.); +#177837 = EDGE_CURVE('',#177829,#177838,#177840,.T.); +#177838 = VERTEX_POINT('',#177839); +#177839 = CARTESIAN_POINT('',(180.966134,-95.218072,1.585)); +#177840 = LINE('',#177841,#177842); +#177841 = CARTESIAN_POINT('',(181.043121,-95.179578,1.585)); +#177842 = VECTOR('',#177843,1.); +#177843 = DIRECTION('',(-0.894424867414,-0.447218242641,0.)); +#177844 = ORIENTED_EDGE('',*,*,#177845,.T.); +#177845 = EDGE_CURVE('',#177838,#177846,#177848,.T.); +#177846 = VERTEX_POINT('',#177847); +#177847 = CARTESIAN_POINT('',(180.935727,-95.248479,1.585)); +#177848 = LINE('',#177849,#177850); +#177849 = CARTESIAN_POINT('',(180.966134,-95.218072,1.585)); +#177850 = VECTOR('',#177851,1.); +#177851 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#177852 = ORIENTED_EDGE('',*,*,#177853,.T.); +#177853 = EDGE_CURVE('',#177846,#177854,#177856,.T.); +#177854 = VERTEX_POINT('',#177855); +#177855 = CARTESIAN_POINT('',(180.935727,-95.445339,1.585)); +#177856 = CIRCLE('',#177857,0.148516804184); +#177857 = AXIS2_PLACEMENT_3D('',#177858,#177859,#177860); +#177858 = CARTESIAN_POINT('',(181.046942,-95.346909,1.585)); +#177859 = DIRECTION('',(0.,0.,1.)); +#177860 = DIRECTION('',(-0.748837820818,0.662753286006,0.)); +#177861 = ORIENTED_EDGE('',*,*,#177862,.T.); +#177862 = EDGE_CURVE('',#177854,#177863,#177865,.T.); +#177863 = VERTEX_POINT('',#177864); +#177864 = CARTESIAN_POINT('',(180.966134,-95.475746,1.585)); +#177865 = LINE('',#177866,#177867); +#177866 = CARTESIAN_POINT('',(180.935727,-95.445339,1.585)); +#177867 = VECTOR('',#177868,1.); +#177868 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#177869 = ORIENTED_EDGE('',*,*,#177870,.T.); +#177870 = EDGE_CURVE('',#177863,#177871,#177873,.T.); +#177871 = VERTEX_POINT('',#177872); +#177872 = CARTESIAN_POINT('',(181.043121,-95.514239,1.585)); +#177873 = LINE('',#177874,#177875); +#177874 = CARTESIAN_POINT('',(180.966134,-95.475746,1.585)); +#177875 = VECTOR('',#177876,1.); +#177876 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#177877 = ORIENTED_EDGE('',*,*,#177878,.T.); +#177878 = EDGE_CURVE('',#177871,#177879,#177881,.T.); +#177879 = VERTEX_POINT('',#177880); +#177880 = CARTESIAN_POINT('',(181.609816,-95.514239,1.585)); +#177881 = CIRCLE('',#177882,0.815433004022); +#177882 = AXIS2_PLACEMENT_3D('',#177883,#177884,#177885); +#177883 = CARTESIAN_POINT('',(181.3264685,-94.74961806235,1.585)); +#177884 = DIRECTION('',(0.,0.,1.)); +#177885 = DIRECTION('',(-0.347481029836,-0.937687012763,0.)); +#177886 = ORIENTED_EDGE('',*,*,#177887,.T.); +#177887 = EDGE_CURVE('',#177879,#177888,#177890,.T.); +#177888 = VERTEX_POINT('',#177889); +#177889 = CARTESIAN_POINT('',(181.686803,-95.475745,1.585)); +#177890 = LINE('',#177891,#177892); +#177891 = CARTESIAN_POINT('',(181.609816,-95.514239,1.585)); +#177892 = VECTOR('',#177893,1.); +#177893 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#177894 = ORIENTED_EDGE('',*,*,#177895,.T.); +#177895 = EDGE_CURVE('',#177888,#177896,#177898,.T.); +#177896 = VERTEX_POINT('',#177897); +#177897 = CARTESIAN_POINT('',(181.717211,-95.445338,1.585)); +#177898 = LINE('',#177899,#177900); +#177899 = CARTESIAN_POINT('',(181.686803,-95.475745,1.585)); +#177900 = VECTOR('',#177901,1.); +#177901 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#177902 = ORIENTED_EDGE('',*,*,#177903,.T.); +#177903 = EDGE_CURVE('',#177896,#177904,#177906,.T.); +#177904 = VERTEX_POINT('',#177905); +#177905 = CARTESIAN_POINT('',(181.717211,-95.248479,1.585)); +#177906 = CIRCLE('',#177907,0.148515070089); +#177907 = AXIS2_PLACEMENT_3D('',#177908,#177909,#177910); +#177908 = CARTESIAN_POINT('',(181.60599787319,-95.3469085,1.585)); +#177909 = DIRECTION('',(0.,-0.,1.)); +#177910 = DIRECTION('',(0.748833951572,-0.6627576578,-0.)); +#177911 = ORIENTED_EDGE('',*,*,#177912,.T.); +#177912 = EDGE_CURVE('',#177904,#177913,#177915,.T.); +#177913 = VERTEX_POINT('',#177914); +#177914 = CARTESIAN_POINT('',(181.686803,-95.218072,1.585)); +#177915 = LINE('',#177916,#177917); +#177916 = CARTESIAN_POINT('',(181.717211,-95.248479,1.585)); +#177917 = VECTOR('',#177918,1.); +#177918 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#177919 = ORIENTED_EDGE('',*,*,#177920,.T.); +#177920 = EDGE_CURVE('',#177913,#177827,#177921,.T.); +#177921 = LINE('',#177922,#177923); +#177922 = CARTESIAN_POINT('',(181.686803,-95.218072,1.585)); +#177923 = VECTOR('',#177924,1.); +#177924 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#177925 = PLANE('',#177926); +#177926 = AXIS2_PLACEMENT_3D('',#177927,#177928,#177929); +#177927 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177928 = DIRECTION('',(0.,0.,1.)); +#177929 = DIRECTION('',(1.,0.,-0.)); +#177930 = SHELL_BASED_SURFACE_MODEL('',(#177931)); +#177931 = OPEN_SHELL('',(#177932)); +#177932 = ADVANCED_FACE('',(#177933),#177969,.T.); +#177933 = FACE_BOUND('',#177934,.F.); +#177934 = EDGE_LOOP('',(#177935,#177946,#177954,#177963)); +#177935 = ORIENTED_EDGE('',*,*,#177936,.T.); +#177936 = EDGE_CURVE('',#177937,#177939,#177941,.T.); +#177937 = VERTEX_POINT('',#177938); +#177938 = CARTESIAN_POINT('',(129.930398,-95.6481,1.585)); +#177939 = VERTEX_POINT('',#177940); +#177940 = CARTESIAN_POINT('',(129.930398,-95.5281,1.585)); +#177941 = CIRCLE('',#177942,6.000000000042E-02); +#177942 = AXIS2_PLACEMENT_3D('',#177943,#177944,#177945); +#177943 = CARTESIAN_POINT('',(129.93039777441,-95.5881,1.585)); +#177944 = DIRECTION('',(0.,0.,-1.)); +#177945 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#177946 = ORIENTED_EDGE('',*,*,#177947,.T.); +#177947 = EDGE_CURVE('',#177939,#177948,#177950,.T.); +#177948 = VERTEX_POINT('',#177949); +#177949 = CARTESIAN_POINT('',(130.452902,-95.5281,1.585)); +#177950 = LINE('',#177951,#177952); +#177951 = CARTESIAN_POINT('',(129.930398,-95.5281,1.585)); +#177952 = VECTOR('',#177953,1.); +#177953 = DIRECTION('',(1.,0.,0.)); +#177954 = ORIENTED_EDGE('',*,*,#177955,.T.); +#177955 = EDGE_CURVE('',#177948,#177956,#177958,.T.); +#177956 = VERTEX_POINT('',#177957); +#177957 = CARTESIAN_POINT('',(130.452902,-95.6481,1.585)); +#177958 = CIRCLE('',#177959,6.000000000043E-02); +#177959 = AXIS2_PLACEMENT_3D('',#177960,#177961,#177962); +#177960 = CARTESIAN_POINT('',(130.45290222558,-95.5881,1.585)); +#177961 = DIRECTION('',(0.,0.,-1.)); +#177962 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#177963 = ORIENTED_EDGE('',*,*,#177964,.T.); +#177964 = EDGE_CURVE('',#177956,#177937,#177965,.T.); +#177965 = LINE('',#177966,#177967); +#177966 = CARTESIAN_POINT('',(130.452902,-95.6481,1.585)); +#177967 = VECTOR('',#177968,1.); +#177968 = DIRECTION('',(-1.,0.,0.)); +#177969 = PLANE('',#177970); +#177970 = AXIS2_PLACEMENT_3D('',#177971,#177972,#177973); +#177971 = CARTESIAN_POINT('',(0.,0.,1.585)); +#177972 = DIRECTION('',(0.,0.,1.)); +#177973 = DIRECTION('',(1.,0.,-0.)); +#177974 = SHELL_BASED_SURFACE_MODEL('',(#177975)); +#177975 = OPEN_SHELL('',(#177976)); +#177976 = ADVANCED_FACE('',(#177977,#178088),#178147,.T.); +#177977 = FACE_BOUND('',#177978,.F.); +#177978 = EDGE_LOOP('',(#177979,#177989,#177998,#178006,#178014,#178022, + #178031,#178039,#178048,#178056,#178065,#178073,#178082)); +#177979 = ORIENTED_EDGE('',*,*,#177980,.T.); +#177980 = EDGE_CURVE('',#177981,#177983,#177985,.T.); +#177981 = VERTEX_POINT('',#177982); +#177982 = CARTESIAN_POINT('',(96.803518,-95.086979,1.585)); +#177983 = VERTEX_POINT('',#177984); +#177984 = CARTESIAN_POINT('',(97.174623,-94.828966,1.585)); +#177985 = LINE('',#177986,#177987); +#177986 = CARTESIAN_POINT('',(96.803518,-95.086979,1.585)); +#177987 = VECTOR('',#177988,1.); +#177988 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#177989 = ORIENTED_EDGE('',*,*,#177990,.T.); +#177990 = EDGE_CURVE('',#177983,#177991,#177993,.T.); +#177991 = VERTEX_POINT('',#177992); +#177992 = CARTESIAN_POINT('',(97.247829,-94.959061,1.585)); +#177993 = CIRCLE('',#177994,7.500005951703E-02); +#177994 = AXIS2_PLACEMENT_3D('',#177995,#177996,#177997); +#177995 = CARTESIAN_POINT('',(97.204818747396,-94.89761893705,1.585)); +#177996 = DIRECTION('',(0.,0.,-1.)); +#177997 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#177998 = ORIENTED_EDGE('',*,*,#177999,.T.); +#177999 = EDGE_CURVE('',#177991,#178000,#178002,.T.); +#178000 = VERTEX_POINT('',#178001); +#178001 = CARTESIAN_POINT('',(96.803628,-95.270001,1.585)); +#178002 = LINE('',#178003,#178004); +#178003 = CARTESIAN_POINT('',(97.247829,-94.959061,1.585)); +#178004 = VECTOR('',#178005,1.); +#178005 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#178006 = ORIENTED_EDGE('',*,*,#178007,.T.); +#178007 = EDGE_CURVE('',#178000,#178008,#178010,.T.); +#178008 = VERTEX_POINT('',#178009); +#178009 = CARTESIAN_POINT('',(96.803628,-95.394047,1.585)); +#178010 = LINE('',#178011,#178012); +#178011 = CARTESIAN_POINT('',(96.803628,-95.270001,1.585)); +#178012 = VECTOR('',#178013,1.); +#178013 = DIRECTION('',(0.,-1.,0.)); +#178014 = ORIENTED_EDGE('',*,*,#178015,.T.); +#178015 = EDGE_CURVE('',#178008,#178016,#178018,.T.); +#178016 = VERTEX_POINT('',#178017); +#178017 = CARTESIAN_POINT('',(97.219451,-95.395488,1.585)); +#178018 = LINE('',#178019,#178020); +#178019 = CARTESIAN_POINT('',(96.803628,-95.394047,1.585)); +#178020 = VECTOR('',#178021,1.); +#178021 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#178022 = ORIENTED_EDGE('',*,*,#178023,.T.); +#178023 = EDGE_CURVE('',#178016,#178024,#178026,.T.); +#178024 = VERTEX_POINT('',#178025); +#178025 = CARTESIAN_POINT('',(97.204819,-95.544047,1.585)); +#178026 = CIRCLE('',#178027,7.500006711464E-02); +#178027 = AXIS2_PLACEMENT_3D('',#178028,#178029,#178030); +#178028 = CARTESIAN_POINT('',(97.204819067115,-95.46904693288,1.585)); +#178029 = DIRECTION('',(0.,0.,-1.)); +#178030 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#178031 = ORIENTED_EDGE('',*,*,#178032,.T.); +#178032 = EDGE_CURVE('',#178024,#178033,#178035,.T.); +#178033 = VERTEX_POINT('',#178034); +#178034 = CARTESIAN_POINT('',(96.190187,-95.542606,1.585)); +#178035 = LINE('',#178036,#178037); +#178036 = CARTESIAN_POINT('',(97.204819,-95.544047,1.585)); +#178037 = VECTOR('',#178038,1.); +#178038 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#178039 = ORIENTED_EDGE('',*,*,#178040,.T.); +#178040 = EDGE_CURVE('',#178033,#178041,#178043,.T.); +#178041 = VERTEX_POINT('',#178042); +#178042 = CARTESIAN_POINT('',(96.129819,-95.469047,1.585)); +#178043 = CIRCLE('',#178044,7.500074938989E-02); +#178044 = AXIS2_PLACEMENT_3D('',#178045,#178046,#178047); +#178045 = CARTESIAN_POINT('',(96.204819749388,-95.46904653389,1.585)); +#178046 = DIRECTION('',(0.,0.,-1.)); +#178047 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#178048 = ORIENTED_EDGE('',*,*,#178049,.T.); +#178049 = EDGE_CURVE('',#178041,#178050,#178052,.T.); +#178050 = VERTEX_POINT('',#178051); +#178051 = CARTESIAN_POINT('',(96.132482,-95.068286,1.585)); +#178052 = LINE('',#178053,#178054); +#178053 = CARTESIAN_POINT('',(96.129819,-95.469047,1.585)); +#178054 = VECTOR('',#178055,1.); +#178055 = DIRECTION('',(6.644711463211E-03,0.999977923661,0.)); +#178056 = ORIENTED_EDGE('',*,*,#178057,.T.); +#178057 = EDGE_CURVE('',#178050,#178058,#178060,.T.); +#178058 = VERTEX_POINT('',#178059); +#178059 = CARTESIAN_POINT('',(96.380663,-94.82406,1.585)); +#178060 = CIRCLE('',#178061,0.3486213829); +#178061 = AXIS2_PLACEMENT_3D('',#178062,#178063,#178064); +#178062 = CARTESIAN_POINT('',(96.468423229516,-95.16145444383,1.585)); +#178063 = DIRECTION('',(0.,0.,-1.)); +#178064 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#178065 = ORIENTED_EDGE('',*,*,#178066,.T.); +#178066 = EDGE_CURVE('',#178058,#178067,#178069,.T.); +#178067 = VERTEX_POINT('',#178068); +#178068 = CARTESIAN_POINT('',(96.552784,-94.82406,1.585)); +#178069 = LINE('',#178070,#178071); +#178070 = CARTESIAN_POINT('',(96.380663,-94.82406,1.585)); +#178071 = VECTOR('',#178072,1.); +#178072 = DIRECTION('',(1.,0.,0.)); +#178073 = ORIENTED_EDGE('',*,*,#178074,.T.); +#178074 = EDGE_CURVE('',#178067,#178075,#178077,.T.); +#178075 = VERTEX_POINT('',#178076); +#178076 = CARTESIAN_POINT('',(96.802187,-95.073463,1.585)); +#178077 = CIRCLE('',#178078,0.347870264855); +#178078 = AXIS2_PLACEMENT_3D('',#178079,#178080,#178081); +#178079 = CARTESIAN_POINT('',(96.465456265028,-95.16079073497,1.585)); +#178080 = DIRECTION('',(0.,0.,-1.)); +#178081 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#178082 = ORIENTED_EDGE('',*,*,#178083,.T.); +#178083 = EDGE_CURVE('',#178075,#177981,#178084,.T.); +#178084 = LINE('',#178085,#178086); +#178085 = CARTESIAN_POINT('',(96.802187,-95.073463,1.585)); +#178086 = VECTOR('',#178087,1.); +#178087 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#178088 = FACE_BOUND('',#178089,.F.); +#178089 = EDGE_LOOP('',(#178090,#178101,#178109,#178117,#178125,#178133, + #178141)); +#178090 = ORIENTED_EDGE('',*,*,#178091,.T.); +#178091 = EDGE_CURVE('',#178092,#178094,#178096,.T.); +#178092 = VERTEX_POINT('',#178093); +#178093 = CARTESIAN_POINT('',(96.588963,-95.006877,1.585)); +#178094 = VERTEX_POINT('',#178095); +#178095 = CARTESIAN_POINT('',(96.314077,-95.037284,1.585)); +#178096 = CIRCLE('',#178097,0.198386215365); +#178097 = AXIS2_PLACEMENT_3D('',#178098,#178099,#178100); +#178098 = CARTESIAN_POINT('',(96.467159957837,-95.1634691753,1.585)); +#178099 = DIRECTION('',(0.,0.,1.)); +#178100 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#178101 = ORIENTED_EDGE('',*,*,#178102,.T.); +#178102 = EDGE_CURVE('',#178094,#178103,#178105,.T.); +#178103 = VERTEX_POINT('',#178104); +#178104 = CARTESIAN_POINT('',(96.279819,-95.1058,1.585)); +#178105 = LINE('',#178106,#178107); +#178106 = CARTESIAN_POINT('',(96.314077,-95.037284,1.585)); +#178107 = VECTOR('',#178108,1.); +#178108 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#178109 = ORIENTED_EDGE('',*,*,#178110,.T.); +#178110 = EDGE_CURVE('',#178103,#178111,#178113,.T.); +#178111 = VERTEX_POINT('',#178112); +#178112 = CARTESIAN_POINT('',(96.279819,-95.394047,1.585)); +#178113 = LINE('',#178114,#178115); +#178114 = CARTESIAN_POINT('',(96.279819,-95.1058,1.585)); +#178115 = VECTOR('',#178116,1.); +#178116 = DIRECTION('',(0.,-1.,0.)); +#178117 = ORIENTED_EDGE('',*,*,#178118,.T.); +#178118 = EDGE_CURVE('',#178111,#178119,#178121,.T.); +#178119 = VERTEX_POINT('',#178120); +#178120 = CARTESIAN_POINT('',(96.653628,-95.394047,1.585)); +#178121 = LINE('',#178122,#178123); +#178122 = CARTESIAN_POINT('',(96.279819,-95.394047,1.585)); +#178123 = VECTOR('',#178124,1.); +#178124 = DIRECTION('',(1.,0.,0.)); +#178125 = ORIENTED_EDGE('',*,*,#178126,.T.); +#178126 = EDGE_CURVE('',#178119,#178127,#178129,.T.); +#178127 = VERTEX_POINT('',#178128); +#178128 = CARTESIAN_POINT('',(96.653628,-95.1058,1.585)); +#178129 = LINE('',#178130,#178131); +#178130 = CARTESIAN_POINT('',(96.653628,-95.394047,1.585)); +#178131 = VECTOR('',#178132,1.); +#178132 = DIRECTION('',(0.,1.,0.)); +#178133 = ORIENTED_EDGE('',*,*,#178134,.T.); +#178134 = EDGE_CURVE('',#178127,#178135,#178137,.T.); +#178135 = VERTEX_POINT('',#178136); +#178136 = CARTESIAN_POINT('',(96.61937,-95.037284,1.585)); +#178137 = LINE('',#178138,#178139); +#178138 = CARTESIAN_POINT('',(96.653628,-95.1058,1.585)); +#178139 = VECTOR('',#178140,1.); +#178140 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#178141 = ORIENTED_EDGE('',*,*,#178142,.T.); +#178142 = EDGE_CURVE('',#178135,#178092,#178143,.T.); +#178143 = LINE('',#178144,#178145); +#178144 = CARTESIAN_POINT('',(96.61937,-95.037284,1.585)); +#178145 = VECTOR('',#178146,1.); +#178146 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#178147 = PLANE('',#178148); +#178148 = AXIS2_PLACEMENT_3D('',#178149,#178150,#178151); +#178149 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178150 = DIRECTION('',(0.,0.,1.)); +#178151 = DIRECTION('',(1.,0.,-0.)); +#178152 = SHELL_BASED_SURFACE_MODEL('',(#178153)); +#178153 = OPEN_SHELL('',(#178154)); +#178154 = ADVANCED_FACE('',(#178155),#178249,.T.); +#178155 = FACE_BOUND('',#178156,.F.); +#178156 = EDGE_LOOP('',(#178157,#178168,#178176,#178185,#178193,#178201, + #178209,#178217,#178226,#178234,#178243)); +#178157 = ORIENTED_EDGE('',*,*,#178158,.T.); +#178158 = EDGE_CURVE('',#178159,#178161,#178163,.T.); +#178159 = VERTEX_POINT('',#178160); +#178160 = CARTESIAN_POINT('',(82.683526,-94.530452,1.585)); +#178161 = VERTEX_POINT('',#178162); +#178162 = CARTESIAN_POINT('',(82.683526,-94.236216,1.585)); +#178163 = CIRCLE('',#178164,0.150000292066); +#178164 = AXIS2_PLACEMENT_3D('',#178165,#178166,#178167); +#178165 = CARTESIAN_POINT('',(82.71279,-94.383334,1.585)); +#178166 = DIRECTION('',(0.,0.,-1.)); +#178167 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#178168 = ORIENTED_EDGE('',*,*,#178169,.T.); +#178169 = EDGE_CURVE('',#178161,#178170,#178172,.T.); +#178170 = VERTEX_POINT('',#178171); +#178171 = CARTESIAN_POINT('',(84.475387,-94.236216,1.585)); +#178172 = LINE('',#178173,#178174); +#178173 = CARTESIAN_POINT('',(82.683526,-94.236216,1.585)); +#178174 = VECTOR('',#178175,1.); +#178175 = DIRECTION('',(1.,0.,0.)); +#178176 = ORIENTED_EDGE('',*,*,#178177,.T.); +#178177 = EDGE_CURVE('',#178170,#178178,#178180,.T.); +#178178 = VERTEX_POINT('',#178179); +#178179 = CARTESIAN_POINT('',(84.435313,-94.533334,1.585)); +#178180 = CIRCLE('',#178181,0.150208531225); +#178181 = AXIS2_PLACEMENT_3D('',#178182,#178183,#178184); +#178182 = CARTESIAN_POINT('',(84.445878305712,-94.38349749854,1.585)); +#178183 = DIRECTION('',(0.,0.,-1.)); +#178184 = DIRECTION('',(0.196451520079,0.980513539049,0.)); +#178185 = ORIENTED_EDGE('',*,*,#178186,.T.); +#178186 = EDGE_CURVE('',#178178,#178187,#178189,.T.); +#178187 = VERTEX_POINT('',#178188); +#178188 = CARTESIAN_POINT('',(84.456478,-94.563871,1.585)); +#178189 = LINE('',#178190,#178191); +#178190 = CARTESIAN_POINT('',(84.435313,-94.533334,1.585)); +#178191 = VECTOR('',#178192,1.); +#178192 = DIRECTION('',(0.569646560297,-0.821889771406,0.)); +#178193 = ORIENTED_EDGE('',*,*,#178194,.T.); +#178194 = EDGE_CURVE('',#178187,#178195,#178197,.T.); +#178195 = VERTEX_POINT('',#178196); +#178196 = CARTESIAN_POINT('',(84.590797,-94.838953,1.585)); +#178197 = LINE('',#178198,#178199); +#178198 = CARTESIAN_POINT('',(84.456478,-94.563871,1.585)); +#178199 = VECTOR('',#178200,1.); +#178200 = DIRECTION('',(0.438773651866,-0.898597619865,0.)); +#178201 = ORIENTED_EDGE('',*,*,#178202,.T.); +#178202 = EDGE_CURVE('',#178195,#178203,#178205,.T.); +#178203 = VERTEX_POINT('',#178204); +#178204 = CARTESIAN_POINT('',(84.596123,-94.878572,1.585)); +#178205 = LINE('',#178206,#178207); +#178206 = CARTESIAN_POINT('',(84.590797,-94.838953,1.585)); +#178207 = VECTOR('',#178208,1.); +#178208 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#178209 = ORIENTED_EDGE('',*,*,#178210,.T.); +#178210 = EDGE_CURVE('',#178203,#178211,#178213,.T.); +#178211 = VERTEX_POINT('',#178212); +#178212 = CARTESIAN_POINT('',(84.593241,-95.155455,1.585)); +#178213 = LINE('',#178214,#178215); +#178214 = CARTESIAN_POINT('',(84.596123,-94.878572,1.585)); +#178215 = VECTOR('',#178216,1.); +#178216 = DIRECTION('',(-1.040816479305E-02,-0.999945833586,0.)); +#178217 = ORIENTED_EDGE('',*,*,#178218,.T.); +#178218 = EDGE_CURVE('',#178211,#178219,#178221,.T.); +#178219 = VERTEX_POINT('',#178220); +#178220 = CARTESIAN_POINT('',(84.299005,-95.155455,1.585)); +#178221 = CIRCLE('',#178222,0.150000292066); +#178222 = AXIS2_PLACEMENT_3D('',#178223,#178224,#178225); +#178223 = CARTESIAN_POINT('',(84.446123,-95.126191,1.585)); +#178224 = DIRECTION('',(-0.,0.,-1.)); +#178225 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#178226 = ORIENTED_EDGE('',*,*,#178227,.T.); +#178227 = EDGE_CURVE('',#178219,#178228,#178230,.T.); +#178228 = VERTEX_POINT('',#178229); +#178229 = CARTESIAN_POINT('',(84.296123,-94.913981,1.585)); +#178230 = LINE('',#178231,#178232); +#178231 = CARTESIAN_POINT('',(84.299005,-95.155455,1.585)); +#178232 = VECTOR('',#178233,1.); +#178233 = DIRECTION('',(-1.1934182391E-02,0.99992878511,0.)); +#178234 = ORIENTED_EDGE('',*,*,#178235,.T.); +#178235 = EDGE_CURVE('',#178228,#178236,#178238,.T.); +#178236 = VERTEX_POINT('',#178237); +#178237 = CARTESIAN_POINT('',(83.915475,-94.533334,1.585)); +#178238 = CIRCLE('',#178239,0.536605331445); +#178239 = AXIS2_PLACEMENT_3D('',#178240,#178241,#178242); +#178240 = CARTESIAN_POINT('',(83.777547224704,-95.05191013764,1.585)); +#178241 = DIRECTION('',(0.,0.,1.)); +#178242 = DIRECTION('',(0.966400713721,0.257040192419,-0.)); +#178243 = ORIENTED_EDGE('',*,*,#178244,.T.); +#178244 = EDGE_CURVE('',#178236,#178159,#178245,.T.); +#178245 = LINE('',#178246,#178247); +#178246 = CARTESIAN_POINT('',(83.915475,-94.533334,1.585)); +#178247 = VECTOR('',#178248,1.); +#178248 = DIRECTION('',(-0.999997263656,2.339376154253E-03,0.)); +#178249 = PLANE('',#178250); +#178250 = AXIS2_PLACEMENT_3D('',#178251,#178252,#178253); +#178251 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178252 = DIRECTION('',(0.,0.,1.)); +#178253 = DIRECTION('',(1.,0.,-0.)); +#178254 = SHELL_BASED_SURFACE_MODEL('',(#178255)); +#178255 = OPEN_SHELL('',(#178256)); +#178256 = ADVANCED_FACE('',(#178257),#178442,.T.); +#178257 = FACE_BOUND('',#178258,.F.); +#178258 = EDGE_LOOP('',(#178259,#178270,#178278,#178287,#178295,#178304, + #178312,#178321,#178329,#178337,#178345,#178354,#178362,#178371, + #178379,#178388,#178396,#178404,#178412,#178420,#178428,#178436)); +#178259 = ORIENTED_EDGE('',*,*,#178260,.T.); +#178260 = EDGE_CURVE('',#178261,#178263,#178265,.T.); +#178261 = VERTEX_POINT('',#178262); +#178262 = CARTESIAN_POINT('',(129.083078,-94.080381,1.585)); +#178263 = VERTEX_POINT('',#178264); +#178264 = CARTESIAN_POINT('',(129.542841,-94.083178,1.585)); +#178265 = CIRCLE('',#178266,0.460785175821); +#178266 = AXIS2_PLACEMENT_3D('',#178267,#178268,#178269); +#178267 = CARTESIAN_POINT('',(129.31053010897,-94.48111597024,1.585)); +#178268 = DIRECTION('',(0.,0.,-1.)); +#178269 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#178270 = ORIENTED_EDGE('',*,*,#178271,.T.); +#178271 = EDGE_CURVE('',#178263,#178272,#178274,.T.); +#178272 = VERTEX_POINT('',#178273); +#178273 = CARTESIAN_POINT('',(129.611152,-94.151489,1.585)); +#178274 = LINE('',#178275,#178276); +#178275 = CARTESIAN_POINT('',(129.542841,-94.083178,1.585)); +#178276 = VECTOR('',#178277,1.); +#178277 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#178278 = ORIENTED_EDGE('',*,*,#178279,.T.); +#178279 = EDGE_CURVE('',#178272,#178280,#178282,.T.); +#178280 = VERTEX_POINT('',#178281); +#178281 = CARTESIAN_POINT('',(129.495759,-94.24619,1.585)); +#178282 = CIRCLE('',#178283,7.500003178657E-02); +#178283 = AXIS2_PLACEMENT_3D('',#178284,#178285,#178286); +#178284 = CARTESIAN_POINT('',(129.54879156212,-94.1931565,1.585)); +#178285 = DIRECTION('',(0.,0.,-1.)); +#178286 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#178287 = ORIENTED_EDGE('',*,*,#178288,.T.); +#178288 = EDGE_CURVE('',#178280,#178289,#178291,.T.); +#178289 = VERTEX_POINT('',#178290); +#178290 = CARTESIAN_POINT('',(129.460659,-94.21109,1.585)); +#178291 = LINE('',#178292,#178293); +#178292 = CARTESIAN_POINT('',(129.495759,-94.24619,1.585)); +#178293 = VECTOR('',#178294,1.); +#178294 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#178295 = ORIENTED_EDGE('',*,*,#178296,.T.); +#178296 = EDGE_CURVE('',#178289,#178297,#178299,.T.); +#178297 = VERTEX_POINT('',#178298); +#178298 = CARTESIAN_POINT('',(129.160735,-94.21109,1.585)); +#178299 = CIRCLE('',#178300,0.299308637371); +#178300 = AXIS2_PLACEMENT_3D('',#178301,#178302,#178303); +#178301 = CARTESIAN_POINT('',(129.310697,-94.470121,1.585)); +#178302 = DIRECTION('',(0.,0.,1.)); +#178303 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#178304 = ORIENTED_EDGE('',*,*,#178305,.T.); +#178305 = EDGE_CURVE('',#178297,#178306,#178308,.T.); +#178306 = VERTEX_POINT('',#178307); +#178307 = CARTESIAN_POINT('',(129.086622,-94.285203,1.585)); +#178308 = LINE('',#178309,#178310); +#178309 = CARTESIAN_POINT('',(129.160735,-94.21109,1.585)); +#178310 = VECTOR('',#178311,1.); +#178311 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#178312 = ORIENTED_EDGE('',*,*,#178313,.T.); +#178313 = EDGE_CURVE('',#178306,#178314,#178316,.T.); +#178314 = VERTEX_POINT('',#178315); +#178315 = CARTESIAN_POINT('',(129.004745,-94.660113,1.585)); +#178316 = CIRCLE('',#178317,0.611712714363); +#178317 = AXIS2_PLACEMENT_3D('',#178318,#178319,#178320); +#178318 = CARTESIAN_POINT('',(129.61315027521,-94.5965876822,1.585)); +#178319 = DIRECTION('',(0.,0.,1.)); +#178320 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#178321 = ORIENTED_EDGE('',*,*,#178322,.T.); +#178322 = EDGE_CURVE('',#178314,#178323,#178325,.T.); +#178323 = VERTEX_POINT('',#178324); +#178324 = CARTESIAN_POINT('',(129.048128,-94.833647,1.585)); +#178325 = LINE('',#178326,#178327); +#178326 = CARTESIAN_POINT('',(129.004745,-94.660113,1.585)); +#178327 = VECTOR('',#178328,1.); +#178328 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#178329 = ORIENTED_EDGE('',*,*,#178330,.T.); +#178330 = EDGE_CURVE('',#178323,#178331,#178333,.T.); +#178331 = VERTEX_POINT('',#178332); +#178332 = CARTESIAN_POINT('',(129.086622,-94.910634,1.585)); +#178333 = LINE('',#178334,#178335); +#178334 = CARTESIAN_POINT('',(129.048128,-94.833647,1.585)); +#178335 = VECTOR('',#178336,1.); +#178336 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#178337 = ORIENTED_EDGE('',*,*,#178338,.T.); +#178338 = EDGE_CURVE('',#178331,#178339,#178341,.T.); +#178339 = VERTEX_POINT('',#178340); +#178340 = CARTESIAN_POINT('',(129.160735,-94.984748,1.585)); +#178341 = LINE('',#178342,#178343); +#178342 = CARTESIAN_POINT('',(129.086622,-94.910634,1.585)); +#178343 = VECTOR('',#178344,1.); +#178344 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#178345 = ORIENTED_EDGE('',*,*,#178346,.T.); +#178346 = EDGE_CURVE('',#178339,#178347,#178349,.T.); +#178347 = VERTEX_POINT('',#178348); +#178348 = CARTESIAN_POINT('',(129.460659,-94.984747,1.585)); +#178349 = CIRCLE('',#178350,0.299305962385); +#178350 = AXIS2_PLACEMENT_3D('',#178351,#178352,#178353); +#178351 = CARTESIAN_POINT('',(129.31069613635,-94.72571959093,1.585)); +#178352 = DIRECTION('',(0.,0.,1.)); +#178353 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#178354 = ORIENTED_EDGE('',*,*,#178355,.T.); +#178355 = EDGE_CURVE('',#178347,#178356,#178358,.T.); +#178356 = VERTEX_POINT('',#178357); +#178357 = CARTESIAN_POINT('',(129.507124,-94.94032,1.585)); +#178358 = LINE('',#178359,#178360); +#178359 = CARTESIAN_POINT('',(129.460659,-94.984747,1.585)); +#178360 = VECTOR('',#178361,1.); +#178361 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#178362 = ORIENTED_EDGE('',*,*,#178363,.T.); +#178363 = EDGE_CURVE('',#178356,#178364,#178366,.T.); +#178364 = VERTEX_POINT('',#178365); +#178365 = CARTESIAN_POINT('',(129.601825,-95.055713,1.585)); +#178366 = CIRCLE('',#178367,7.499993690112E-02); +#178367 = AXIS2_PLACEMENT_3D('',#178368,#178369,#178370); +#178368 = CARTESIAN_POINT('',(129.5487922483,-95.00267982374,1.585)); +#178369 = DIRECTION('',(0.,0.,-1.)); +#178370 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#178371 = ORIENTED_EDGE('',*,*,#178372,.T.); +#178372 = EDGE_CURVE('',#178364,#178373,#178375,.T.); +#178373 = VERTEX_POINT('',#178374); +#178374 = CARTESIAN_POINT('',(129.538315,-95.115457,1.585)); +#178375 = LINE('',#178376,#178377); +#178376 = CARTESIAN_POINT('',(129.601825,-95.055713,1.585)); +#178377 = VECTOR('',#178378,1.); +#178378 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#178379 = ORIENTED_EDGE('',*,*,#178380,.T.); +#178380 = EDGE_CURVE('',#178373,#178381,#178383,.T.); +#178381 = VERTEX_POINT('',#178382); +#178382 = CARTESIAN_POINT('',(129.078553,-95.112661,1.585)); +#178383 = CIRCLE('',#178384,0.461067828848); +#178384 = AXIS2_PLACEMENT_3D('',#178385,#178386,#178387); +#178385 = CARTESIAN_POINT('',(129.31086451268,-94.71439613352,1.585)); +#178386 = DIRECTION('',(-0.,0.,-1.)); +#178387 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#178388 = ORIENTED_EDGE('',*,*,#178389,.T.); +#178389 = EDGE_CURVE('',#178381,#178390,#178392,.T.); +#178390 = VERTEX_POINT('',#178391); +#178391 = CARTESIAN_POINT('',(128.961864,-94.994898,1.585)); +#178392 = LINE('',#178393,#178394); +#178393 = CARTESIAN_POINT('',(129.078553,-95.112661,1.585)); +#178394 = VECTOR('',#178395,1.); +#178395 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#178396 = ORIENTED_EDGE('',*,*,#178397,.T.); +#178397 = EDGE_CURVE('',#178390,#178398,#178400,.T.); +#178398 = VERTEX_POINT('',#178399); +#178399 = CARTESIAN_POINT('',(128.904603,-94.878013,1.585)); +#178400 = LINE('',#178401,#178402); +#178401 = CARTESIAN_POINT('',(128.961864,-94.994898,1.585)); +#178402 = VECTOR('',#178403,1.); +#178403 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#178404 = ORIENTED_EDGE('',*,*,#178405,.T.); +#178405 = EDGE_CURVE('',#178398,#178406,#178408,.T.); +#178406 = VERTEX_POINT('',#178407); +#178407 = CARTESIAN_POINT('',(128.854745,-94.669347,1.585)); +#178408 = LINE('',#178409,#178410); +#178409 = CARTESIAN_POINT('',(128.904603,-94.878013,1.585)); +#178410 = VECTOR('',#178411,1.); +#178411 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#178412 = ORIENTED_EDGE('',*,*,#178413,.T.); +#178413 = EDGE_CURVE('',#178406,#178414,#178416,.T.); +#178414 = VERTEX_POINT('',#178415); +#178415 = CARTESIAN_POINT('',(128.856984,-94.5083,1.585)); +#178416 = LINE('',#178417,#178418); +#178417 = CARTESIAN_POINT('',(128.854745,-94.669347,1.585)); +#178418 = VECTOR('',#178419,1.); +#178419 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#178420 = ORIENTED_EDGE('',*,*,#178421,.T.); +#178421 = EDGE_CURVE('',#178414,#178422,#178424,.T.); +#178422 = VERTEX_POINT('',#178423); +#178423 = CARTESIAN_POINT('',(128.910282,-94.302473,1.585)); +#178424 = LINE('',#178425,#178426); +#178425 = CARTESIAN_POINT('',(128.856984,-94.5083,1.585)); +#178426 = VECTOR('',#178427,1.); +#178427 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#178428 = ORIENTED_EDGE('',*,*,#178429,.T.); +#178429 = EDGE_CURVE('',#178422,#178430,#178432,.T.); +#178430 = VERTEX_POINT('',#178431); +#178431 = CARTESIAN_POINT('',(128.967231,-94.193492,1.585)); +#178432 = LINE('',#178433,#178434); +#178433 = CARTESIAN_POINT('',(128.910282,-94.302473,1.585)); +#178434 = VECTOR('',#178435,1.); +#178435 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#178436 = ORIENTED_EDGE('',*,*,#178437,.T.); +#178437 = EDGE_CURVE('',#178430,#178261,#178438,.T.); +#178438 = LINE('',#178439,#178440); +#178439 = CARTESIAN_POINT('',(128.967231,-94.193492,1.585)); +#178440 = VECTOR('',#178441,1.); +#178441 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#178442 = PLANE('',#178443); +#178443 = AXIS2_PLACEMENT_3D('',#178444,#178445,#178446); +#178444 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178445 = DIRECTION('',(0.,0.,1.)); +#178446 = DIRECTION('',(1.,0.,-0.)); +#178447 = SHELL_BASED_SURFACE_MODEL('',(#178448)); +#178448 = OPEN_SHELL('',(#178449)); +#178449 = ADVANCED_FACE('',(#178450),#178636,.T.); +#178450 = FACE_BOUND('',#178451,.F.); +#178451 = EDGE_LOOP('',(#178452,#178463,#178471,#178480,#178488,#178496, + #178505,#178513,#178522,#178530,#178538,#178546,#178555,#178563, + #178572,#178580,#178589,#178597,#178605,#178613,#178622,#178630)); +#178452 = ORIENTED_EDGE('',*,*,#178453,.T.); +#178453 = EDGE_CURVE('',#178454,#178456,#178458,.T.); +#178454 = VERTEX_POINT('',#178455); +#178455 = CARTESIAN_POINT('',(129.867494,-94.171478,1.585)); +#178456 = VERTEX_POINT('',#178457); +#178457 = CARTESIAN_POINT('',(129.882126,-94.022919,1.585)); +#178458 = CIRCLE('',#178459,7.500006711464E-02); +#178459 = AXIS2_PLACEMENT_3D('',#178460,#178461,#178462); +#178460 = CARTESIAN_POINT('',(129.88212593288,-94.09791906711,1.585)); +#178461 = DIRECTION('',(0.,0.,-1.)); +#178462 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#178463 = ORIENTED_EDGE('',*,*,#178464,.T.); +#178464 = EDGE_CURVE('',#178456,#178465,#178467,.T.); +#178465 = VERTEX_POINT('',#178466); +#178466 = CARTESIAN_POINT('',(130.508911,-94.023681,1.585)); +#178467 = LINE('',#178468,#178469); +#178468 = CARTESIAN_POINT('',(129.882126,-94.022919,1.585)); +#178469 = VECTOR('',#178470,1.); +#178470 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#178471 = ORIENTED_EDGE('',*,*,#178472,.T.); +#178472 = EDGE_CURVE('',#178465,#178473,#178475,.T.); +#178473 = VERTEX_POINT('',#178474); +#178474 = CARTESIAN_POINT('',(130.574732,-94.112551,1.585)); +#178475 = CIRCLE('',#178476,7.447391611627E-02); +#178476 = AXIS2_PLACEMENT_3D('',#178477,#178478,#178479); +#178477 = CARTESIAN_POINT('',(130.50173192664,-94.0978080874,1.585)); +#178478 = DIRECTION('',(0.,0.,-1.)); +#178479 = DIRECTION('',(9.639715124812E-02,0.995342950561,0.)); +#178480 = ORIENTED_EDGE('',*,*,#178481,.T.); +#178481 = EDGE_CURVE('',#178473,#178482,#178484,.T.); +#178482 = VERTEX_POINT('',#178483); +#178483 = CARTESIAN_POINT('',(130.557616,-94.147307,1.585)); +#178484 = LINE('',#178485,#178486); +#178485 = CARTESIAN_POINT('',(130.574732,-94.112551,1.585)); +#178486 = VECTOR('',#178487,1.); +#178487 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#178488 = ORIENTED_EDGE('',*,*,#178489,.T.); +#178489 = EDGE_CURVE('',#178482,#178490,#178492,.T.); +#178490 = VERTEX_POINT('',#178491); +#178491 = CARTESIAN_POINT('',(130.33072,-94.406616,1.585)); +#178492 = LINE('',#178493,#178494); +#178493 = CARTESIAN_POINT('',(130.557616,-94.147307,1.585)); +#178494 = VECTOR('',#178495,1.); +#178495 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#178496 = ORIENTED_EDGE('',*,*,#178497,.T.); +#178497 = EDGE_CURVE('',#178490,#178498,#178500,.T.); +#178498 = VERTEX_POINT('',#178499); +#178499 = CARTESIAN_POINT('',(130.574732,-94.654715,1.585)); +#178500 = CIRCLE('',#178501,0.348520834816); +#178501 = AXIS2_PLACEMENT_3D('',#178502,#178503,#178504); +#178502 = CARTESIAN_POINT('',(130.2374266174,-94.74241819931,1.585)); +#178503 = DIRECTION('',(0.,0.,-1.)); +#178504 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#178505 = ORIENTED_EDGE('',*,*,#178506,.T.); +#178506 = EDGE_CURVE('',#178498,#178507,#178509,.T.); +#178507 = VERTEX_POINT('',#178508); +#178508 = CARTESIAN_POINT('',(130.57351,-94.927252,1.585)); +#178509 = LINE('',#178510,#178511); +#178510 = CARTESIAN_POINT('',(130.574732,-94.654715,1.585)); +#178511 = VECTOR('',#178512,1.); +#178512 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#178513 = ORIENTED_EDGE('',*,*,#178514,.T.); +#178514 = EDGE_CURVE('',#178507,#178515,#178517,.T.); +#178515 = VERTEX_POINT('',#178516); +#178516 = CARTESIAN_POINT('',(130.325329,-95.171478,1.585)); +#178517 = CIRCLE('',#178518,0.348635327447); +#178518 = AXIS2_PLACEMENT_3D('',#178519,#178520,#178521); +#178519 = CARTESIAN_POINT('',(130.23755748129,-94.83407208415,1.585)); +#178520 = DIRECTION('',(0.,0.,-1.)); +#178521 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#178522 = ORIENTED_EDGE('',*,*,#178523,.T.); +#178523 = EDGE_CURVE('',#178515,#178524,#178526,.T.); +#178524 = VERTEX_POINT('',#178525); +#178525 = CARTESIAN_POINT('',(130.005173,-95.170256,1.585)); +#178526 = LINE('',#178527,#178528); +#178527 = CARTESIAN_POINT('',(130.325329,-95.171478,1.585)); +#178528 = VECTOR('',#178529,1.); +#178529 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#178530 = ORIENTED_EDGE('',*,*,#178531,.T.); +#178531 = EDGE_CURVE('',#178524,#178532,#178534,.T.); +#178532 = VERTEX_POINT('',#178533); +#178533 = CARTESIAN_POINT('',(129.88246,-95.10805,1.585)); +#178534 = LINE('',#178535,#178536); +#178535 = CARTESIAN_POINT('',(130.005173,-95.170256,1.585)); +#178536 = VECTOR('',#178537,1.); +#178537 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#178538 = ORIENTED_EDGE('',*,*,#178539,.T.); +#178539 = EDGE_CURVE('',#178532,#178540,#178542,.T.); +#178540 = VERTEX_POINT('',#178541); +#178541 = CARTESIAN_POINT('',(129.819765,-95.044347,1.585)); +#178542 = LINE('',#178543,#178544); +#178543 = CARTESIAN_POINT('',(129.88246,-95.10805,1.585)); +#178544 = VECTOR('',#178545,1.); +#178545 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#178546 = ORIENTED_EDGE('',*,*,#178547,.T.); +#178547 = EDGE_CURVE('',#178540,#178548,#178550,.T.); +#178548 = VERTEX_POINT('',#178549); +#178549 = CARTESIAN_POINT('',(129.93516,-94.949648,1.585)); +#178550 = CIRCLE('',#178551,7.50001266804E-02); +#178551 = AXIS2_PLACEMENT_3D('',#178552,#178553,#178554); +#178552 = CARTESIAN_POINT('',(129.88212605199,-95.00268024831,1.585)); +#178553 = DIRECTION('',(0.,0.,-1.)); +#178554 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#178555 = ORIENTED_EDGE('',*,*,#178556,.T.); +#178556 = EDGE_CURVE('',#178548,#178557,#178559,.T.); +#178557 = VERTEX_POINT('',#178558); +#178558 = CARTESIAN_POINT('',(129.974172,-94.988661,1.585)); +#178559 = LINE('',#178560,#178561); +#178560 = CARTESIAN_POINT('',(129.93516,-94.949648,1.585)); +#178561 = VECTOR('',#178562,1.); +#178562 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#178563 = ORIENTED_EDGE('',*,*,#178564,.T.); +#178564 = EDGE_CURVE('',#178557,#178565,#178567,.T.); +#178565 = VERTEX_POINT('',#178566); +#178566 = CARTESIAN_POINT('',(130.361507,-94.988661,1.585)); +#178567 = CIRCLE('',#178568,0.358502380266); +#178568 = AXIS2_PLACEMENT_3D('',#178569,#178570,#178571); +#178569 = CARTESIAN_POINT('',(130.1678395,-94.686971,1.585)); +#178570 = DIRECTION('',(0.,0.,1.)); +#178571 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#178572 = ORIENTED_EDGE('',*,*,#178573,.T.); +#178573 = EDGE_CURVE('',#178565,#178574,#178576,.T.); +#178574 = VERTEX_POINT('',#178575); +#178575 = CARTESIAN_POINT('',(130.391914,-94.958253,1.585)); +#178576 = LINE('',#178577,#178578); +#178577 = CARTESIAN_POINT('',(130.361507,-94.988661,1.585)); +#178578 = VECTOR('',#178579,1.); +#178579 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#178580 = ORIENTED_EDGE('',*,*,#178581,.T.); +#178581 = EDGE_CURVE('',#178574,#178582,#178584,.T.); +#178582 = VERTEX_POINT('',#178583); +#178583 = CARTESIAN_POINT('',(130.391915,-94.618536,1.585)); +#178584 = CIRCLE('',#178585,0.305616146029); +#178585 = AXIS2_PLACEMENT_3D('',#178586,#178587,#178588); +#178586 = CARTESIAN_POINT('',(130.13784892049,-94.78839375212,1.585)); +#178587 = DIRECTION('',(0.,-0.,1.)); +#178588 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#178589 = ORIENTED_EDGE('',*,*,#178590,.T.); +#178590 = EDGE_CURVE('',#178582,#178591,#178593,.T.); +#178591 = VERTEX_POINT('',#178592); +#178592 = CARTESIAN_POINT('',(130.361508,-94.588129,1.585)); +#178593 = LINE('',#178594,#178595); +#178594 = CARTESIAN_POINT('',(130.391915,-94.618536,1.585)); +#178595 = VECTOR('',#178596,1.); +#178596 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#178597 = ORIENTED_EDGE('',*,*,#178598,.T.); +#178598 = EDGE_CURVE('',#178591,#178599,#178601,.T.); +#178599 = VERTEX_POINT('',#178600); +#178600 = CARTESIAN_POINT('',(130.292992,-94.553871,1.585)); +#178601 = LINE('',#178602,#178603); +#178602 = CARTESIAN_POINT('',(130.361508,-94.588129,1.585)); +#178603 = VECTOR('',#178604,1.); +#178604 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#178605 = ORIENTED_EDGE('',*,*,#178606,.T.); +#178606 = EDGE_CURVE('',#178599,#178607,#178609,.T.); +#178607 = VERTEX_POINT('',#178608); +#178608 = CARTESIAN_POINT('',(130.153208,-94.55243,1.585)); +#178609 = LINE('',#178610,#178611); +#178610 = CARTESIAN_POINT('',(130.292992,-94.553871,1.585)); +#178611 = VECTOR('',#178612,1.); +#178612 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#178613 = ORIENTED_EDGE('',*,*,#178614,.T.); +#178614 = EDGE_CURVE('',#178607,#178615,#178617,.T.); +#178615 = VERTEX_POINT('',#178616); +#178616 = CARTESIAN_POINT('',(130.111397,-94.429483,1.585)); +#178617 = CIRCLE('',#178618,7.500015628756E-02); +#178618 = AXIS2_PLACEMENT_3D('',#178619,#178620,#178621); +#178619 = CARTESIAN_POINT('',(130.16784028432,-94.4788710461,1.585)); +#178620 = DIRECTION('',(0.,0.,-1.)); +#178621 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#178622 = ORIENTED_EDGE('',*,*,#178623,.T.); +#178623 = EDGE_CURVE('',#178615,#178624,#178626,.T.); +#178624 = VERTEX_POINT('',#178625); +#178625 = CARTESIAN_POINT('',(130.335891,-94.172919,1.585)); +#178626 = LINE('',#178627,#178628); +#178627 = CARTESIAN_POINT('',(130.111397,-94.429483,1.585)); +#178628 = VECTOR('',#178629,1.); +#178629 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#178630 = ORIENTED_EDGE('',*,*,#178631,.T.); +#178631 = EDGE_CURVE('',#178624,#178454,#178632,.T.); +#178632 = LINE('',#178633,#178634); +#178633 = CARTESIAN_POINT('',(130.335891,-94.172919,1.585)); +#178634 = VECTOR('',#178635,1.); +#178635 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#178636 = PLANE('',#178637); +#178637 = AXIS2_PLACEMENT_3D('',#178638,#178639,#178640); +#178638 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178639 = DIRECTION('',(0.,0.,1.)); +#178640 = DIRECTION('',(1.,0.,-0.)); +#178641 = SHELL_BASED_SURFACE_MODEL('',(#178642)); +#178642 = OPEN_SHELL('',(#178643)); +#178643 = ADVANCED_FACE('',(#178644),#178839,.T.); +#178644 = FACE_BOUND('',#178645,.F.); +#178645 = EDGE_LOOP('',(#178646,#178657,#178665,#178674,#178682,#178690, + #178698,#178706,#178715,#178723,#178732,#178740,#178748,#178756, + #178765,#178773,#178782,#178790,#178799,#178807,#178816,#178824, + #178833)); +#178646 = ORIENTED_EDGE('',*,*,#178647,.T.); +#178647 = EDGE_CURVE('',#178648,#178650,#178652,.T.); +#178648 = VERTEX_POINT('',#178649); +#178649 = CARTESIAN_POINT('',(130.858007,-94.07604,1.585)); +#178650 = VERTEX_POINT('',#178651); +#178651 = CARTESIAN_POINT('',(130.929745,-94.022919,1.585)); +#178652 = CIRCLE('',#178653,7.50033610077E-02); +#178653 = AXIS2_PLACEMENT_3D('',#178654,#178655,#178656); +#178654 = CARTESIAN_POINT('',(130.9297472707,-94.09792236097,1.585)); +#178655 = DIRECTION('',(0.,0.,-1.)); +#178656 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#178657 = ORIENTED_EDGE('',*,*,#178658,.T.); +#178658 = EDGE_CURVE('',#178650,#178659,#178661,.T.); +#178659 = VERTEX_POINT('',#178660); +#178660 = CARTESIAN_POINT('',(131.420567,-94.02436,1.585)); +#178661 = LINE('',#178662,#178663); +#178662 = CARTESIAN_POINT('',(130.929745,-94.022919,1.585)); +#178663 = VECTOR('',#178664,1.); +#178664 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#178665 = ORIENTED_EDGE('',*,*,#178666,.T.); +#178666 = EDGE_CURVE('',#178659,#178667,#178669,.T.); +#178667 = VERTEX_POINT('',#178668); +#178668 = CARTESIAN_POINT('',(131.405935,-94.172919,1.585)); +#178669 = CIRCLE('',#178670,7.500006711464E-02); +#178670 = AXIS2_PLACEMENT_3D('',#178671,#178672,#178673); +#178671 = CARTESIAN_POINT('',(131.40593506711,-94.09791893288,1.585)); +#178672 = DIRECTION('',(0.,0.,-1.)); +#178673 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#178674 = ORIENTED_EDGE('',*,*,#178675,.T.); +#178675 = EDGE_CURVE('',#178667,#178676,#178678,.T.); +#178676 = VERTEX_POINT('',#178677); +#178677 = CARTESIAN_POINT('',(130.997619,-94.172919,1.585)); +#178678 = LINE('',#178679,#178680); +#178679 = CARTESIAN_POINT('',(131.405935,-94.172919,1.585)); +#178680 = VECTOR('',#178681,1.); +#178681 = DIRECTION('',(-1.,0.,0.)); +#178682 = ORIENTED_EDGE('',*,*,#178683,.T.); +#178683 = EDGE_CURVE('',#178676,#178684,#178686,.T.); +#178684 = VERTEX_POINT('',#178685); +#178685 = CARTESIAN_POINT('',(130.9728,-94.421109,1.585)); +#178686 = LINE('',#178687,#178688); +#178687 = CARTESIAN_POINT('',(130.997619,-94.172919,1.585)); +#178688 = VECTOR('',#178689,1.); +#178689 = DIRECTION('',(-9.950371902091E-02,-0.99503719021,0.)); +#178690 = ORIENTED_EDGE('',*,*,#178691,.T.); +#178691 = EDGE_CURVE('',#178684,#178692,#178694,.T.); +#178692 = VERTEX_POINT('',#178693); +#178693 = CARTESIAN_POINT('',(131.010351,-94.405312,1.585)); +#178694 = LINE('',#178695,#178696); +#178695 = CARTESIAN_POINT('',(130.9728,-94.421109,1.585)); +#178696 = VECTOR('',#178697,1.); +#178697 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#178698 = ORIENTED_EDGE('',*,*,#178699,.T.); +#178699 = EDGE_CURVE('',#178692,#178700,#178702,.T.); +#178700 = VERTEX_POINT('',#178701); +#178701 = CARTESIAN_POINT('',(131.282887,-94.406534,1.585)); +#178702 = LINE('',#178703,#178704); +#178703 = CARTESIAN_POINT('',(131.010351,-94.405312,1.585)); +#178704 = VECTOR('',#178705,1.); +#178705 = DIRECTION('',(0.99998994787,-4.48376624114E-03,0.)); +#178706 = ORIENTED_EDGE('',*,*,#178707,.T.); +#178707 = EDGE_CURVE('',#178700,#178708,#178710,.T.); +#178708 = VERTEX_POINT('',#178709); +#178709 = CARTESIAN_POINT('',(131.527113,-94.654715,1.585)); +#178710 = CIRCLE('',#178711,0.348625649748); +#178711 = AXIS2_PLACEMENT_3D('',#178712,#178713,#178714); +#178712 = CARTESIAN_POINT('',(131.18971504586,-94.74247868387,1.585)); +#178713 = DIRECTION('',(0.,0.,-1.)); +#178714 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#178715 = ORIENTED_EDGE('',*,*,#178716,.T.); +#178716 = EDGE_CURVE('',#178708,#178717,#178719,.T.); +#178717 = VERTEX_POINT('',#178718); +#178718 = CARTESIAN_POINT('',(131.525891,-94.927252,1.585)); +#178719 = LINE('',#178720,#178721); +#178720 = CARTESIAN_POINT('',(131.527113,-94.654715,1.585)); +#178721 = VECTOR('',#178722,1.); +#178722 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#178723 = ORIENTED_EDGE('',*,*,#178724,.T.); +#178724 = EDGE_CURVE('',#178717,#178725,#178727,.T.); +#178725 = VERTEX_POINT('',#178726); +#178726 = CARTESIAN_POINT('',(131.27771,-95.171478,1.585)); +#178727 = CIRCLE('',#178728,0.348635327447); +#178728 = AXIS2_PLACEMENT_3D('',#178729,#178730,#178731); +#178729 = CARTESIAN_POINT('',(131.18993848129,-94.83407208415,1.585)); +#178730 = DIRECTION('',(0.,0.,-1.)); +#178731 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#178732 = ORIENTED_EDGE('',*,*,#178733,.T.); +#178733 = EDGE_CURVE('',#178725,#178734,#178736,.T.); +#178734 = VERTEX_POINT('',#178735); +#178735 = CARTESIAN_POINT('',(131.005173,-95.170256,1.585)); +#178736 = LINE('',#178737,#178738); +#178737 = CARTESIAN_POINT('',(131.27771,-95.171478,1.585)); +#178738 = VECTOR('',#178739,1.); +#178739 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#178740 = ORIENTED_EDGE('',*,*,#178741,.T.); +#178741 = EDGE_CURVE('',#178734,#178742,#178744,.T.); +#178742 = VERTEX_POINT('',#178743); +#178743 = CARTESIAN_POINT('',(130.88246,-95.10805,1.585)); +#178744 = LINE('',#178745,#178746); +#178745 = CARTESIAN_POINT('',(131.005173,-95.170256,1.585)); +#178746 = VECTOR('',#178747,1.); +#178747 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#178748 = ORIENTED_EDGE('',*,*,#178749,.T.); +#178749 = EDGE_CURVE('',#178742,#178750,#178752,.T.); +#178750 = VERTEX_POINT('',#178751); +#178751 = CARTESIAN_POINT('',(130.819765,-95.044347,1.585)); +#178752 = LINE('',#178753,#178754); +#178753 = CARTESIAN_POINT('',(130.88246,-95.10805,1.585)); +#178754 = VECTOR('',#178755,1.); +#178755 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#178756 = ORIENTED_EDGE('',*,*,#178757,.T.); +#178757 = EDGE_CURVE('',#178750,#178758,#178760,.T.); +#178758 = VERTEX_POINT('',#178759); +#178759 = CARTESIAN_POINT('',(130.93516,-94.949648,1.585)); +#178760 = CIRCLE('',#178761,7.50001266804E-02); +#178761 = AXIS2_PLACEMENT_3D('',#178762,#178763,#178764); +#178762 = CARTESIAN_POINT('',(130.88212605199,-95.00268024831,1.585)); +#178763 = DIRECTION('',(0.,0.,-1.)); +#178764 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#178765 = ORIENTED_EDGE('',*,*,#178766,.T.); +#178766 = EDGE_CURVE('',#178758,#178767,#178769,.T.); +#178767 = VERTEX_POINT('',#178768); +#178768 = CARTESIAN_POINT('',(130.974172,-94.988661,1.585)); +#178769 = LINE('',#178770,#178771); +#178770 = CARTESIAN_POINT('',(130.93516,-94.949648,1.585)); +#178771 = VECTOR('',#178772,1.); +#178772 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#178773 = ORIENTED_EDGE('',*,*,#178774,.T.); +#178774 = EDGE_CURVE('',#178767,#178775,#178777,.T.); +#178775 = VERTEX_POINT('',#178776); +#178776 = CARTESIAN_POINT('',(131.313888,-94.988661,1.585)); +#178777 = CIRCLE('',#178778,0.305620374329); +#178778 = AXIS2_PLACEMENT_3D('',#178779,#178780,#178781); +#178779 = CARTESIAN_POINT('',(131.14403,-94.73459,1.585)); +#178780 = DIRECTION('',(0.,0.,1.)); +#178781 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#178782 = ORIENTED_EDGE('',*,*,#178783,.T.); +#178783 = EDGE_CURVE('',#178775,#178784,#178786,.T.); +#178784 = VERTEX_POINT('',#178785); +#178785 = CARTESIAN_POINT('',(131.344295,-94.958253,1.585)); +#178786 = LINE('',#178787,#178788); +#178787 = CARTESIAN_POINT('',(131.313888,-94.988661,1.585)); +#178788 = VECTOR('',#178789,1.); +#178789 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#178790 = ORIENTED_EDGE('',*,*,#178791,.T.); +#178791 = EDGE_CURVE('',#178784,#178792,#178794,.T.); +#178792 = VERTEX_POINT('',#178793); +#178793 = CARTESIAN_POINT('',(131.344296,-94.618536,1.585)); +#178794 = CIRCLE('',#178795,0.305616146029); +#178795 = AXIS2_PLACEMENT_3D('',#178796,#178797,#178798); +#178796 = CARTESIAN_POINT('',(131.09022992049,-94.78839375212,1.585)); +#178797 = DIRECTION('',(0.,-0.,1.)); +#178798 = DIRECTION('',(0.83132086707,-0.555792781505,-0.)); +#178799 = ORIENTED_EDGE('',*,*,#178800,.T.); +#178800 = EDGE_CURVE('',#178792,#178801,#178803,.T.); +#178801 = VERTEX_POINT('',#178802); +#178802 = CARTESIAN_POINT('',(131.313889,-94.588129,1.585)); +#178803 = LINE('',#178804,#178805); +#178804 = CARTESIAN_POINT('',(131.344296,-94.618536,1.585)); +#178805 = VECTOR('',#178806,1.); +#178806 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#178807 = ORIENTED_EDGE('',*,*,#178808,.T.); +#178808 = EDGE_CURVE('',#178801,#178809,#178811,.T.); +#178809 = VERTEX_POINT('',#178810); +#178810 = CARTESIAN_POINT('',(130.974172,-94.588129,1.585)); +#178811 = CIRCLE('',#178812,0.305621483548); +#178812 = AXIS2_PLACEMENT_3D('',#178813,#178814,#178815); +#178813 = CARTESIAN_POINT('',(131.1440305,-94.842201,1.585)); +#178814 = DIRECTION('',(0.,0.,1.)); +#178815 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#178816 = ORIENTED_EDGE('',*,*,#178817,.T.); +#178817 = EDGE_CURVE('',#178809,#178818,#178820,.T.); +#178818 = VERTEX_POINT('',#178819); +#178819 = CARTESIAN_POINT('',(130.917382,-94.640306,1.585)); +#178820 = LINE('',#178821,#178822); +#178821 = CARTESIAN_POINT('',(130.974172,-94.588129,1.585)); +#178822 = VECTOR('',#178823,1.); +#178823 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#178824 = ORIENTED_EDGE('',*,*,#178825,.T.); +#178825 = EDGE_CURVE('',#178818,#178826,#178828,.T.); +#178826 = VERTEX_POINT('',#178827); +#178827 = CARTESIAN_POINT('',(130.807476,-94.581349,1.585)); +#178828 = CIRCLE('',#178829,7.500024172469E-02); +#178829 = AXIS2_PLACEMENT_3D('',#178830,#178831,#178832); +#178830 = CARTESIAN_POINT('',(130.88212597002,-94.57410895619,1.585)); +#178831 = DIRECTION('',(-0.,0.,-1.)); +#178832 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#178833 = ORIENTED_EDGE('',*,*,#178834,.T.); +#178834 = EDGE_CURVE('',#178826,#178648,#178835,.T.); +#178835 = LINE('',#178836,#178837); +#178836 = CARTESIAN_POINT('',(130.807476,-94.581349,1.585)); +#178837 = VECTOR('',#178838,1.); +#178838 = DIRECTION('',(9.950391398786E-02,0.995037170713,0.)); +#178839 = PLANE('',#178840); +#178840 = AXIS2_PLACEMENT_3D('',#178841,#178842,#178843); +#178841 = CARTESIAN_POINT('',(0.,0.,1.585)); +#178842 = DIRECTION('',(0.,0.,1.)); +#178843 = DIRECTION('',(1.,0.,-0.)); +#178844 = SHELL_BASED_SURFACE_MODEL('',(#178845)); +#178845 = OPEN_SHELL('',(#178846)); +#178846 = ADVANCED_FACE('',(#178847,#178958),#179017,.T.); +#178847 = FACE_BOUND('',#178848,.F.); +#178848 = EDGE_LOOP('',(#178849,#178859,#178868,#178876,#178884,#178892, + #178901,#178909,#178918,#178926,#178935,#178943,#178952)); +#178849 = ORIENTED_EDGE('',*,*,#178850,.T.); +#178850 = EDGE_CURVE('',#178851,#178853,#178855,.T.); +#178851 = VERTEX_POINT('',#178852); +#178852 = CARTESIAN_POINT('',(91.753518,-94.632217,1.585)); +#178853 = VERTEX_POINT('',#178854); +#178854 = CARTESIAN_POINT('',(92.124623,-94.374204,1.585)); +#178855 = LINE('',#178856,#178857); +#178856 = CARTESIAN_POINT('',(91.753518,-94.632217,1.585)); +#178857 = VECTOR('',#178858,1.); +#178858 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#178859 = ORIENTED_EDGE('',*,*,#178860,.T.); +#178860 = EDGE_CURVE('',#178853,#178861,#178863,.T.); +#178861 = VERTEX_POINT('',#178862); +#178862 = CARTESIAN_POINT('',(92.197829,-94.504299,1.585)); +#178863 = CIRCLE('',#178864,7.500005951702E-02); +#178864 = AXIS2_PLACEMENT_3D('',#178865,#178866,#178867); +#178865 = CARTESIAN_POINT('',(92.154818747396,-94.44285693705,1.585)); +#178866 = DIRECTION('',(0.,0.,-1.)); +#178867 = DIRECTION('',(-0.402609645791,0.915371767707,-0.)); +#178868 = ORIENTED_EDGE('',*,*,#178869,.T.); +#178869 = EDGE_CURVE('',#178861,#178870,#178872,.T.); +#178870 = VERTEX_POINT('',#178871); +#178871 = CARTESIAN_POINT('',(91.753628,-94.815239,1.585)); +#178872 = LINE('',#178873,#178874); +#178873 = CARTESIAN_POINT('',(92.197829,-94.504299,1.585)); +#178874 = VECTOR('',#178875,1.); +#178875 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#178876 = ORIENTED_EDGE('',*,*,#178877,.T.); +#178877 = EDGE_CURVE('',#178870,#178878,#178880,.T.); +#178878 = VERTEX_POINT('',#178879); +#178879 = CARTESIAN_POINT('',(91.753628,-94.939285,1.585)); +#178880 = LINE('',#178881,#178882); +#178881 = CARTESIAN_POINT('',(91.753628,-94.815239,1.585)); +#178882 = VECTOR('',#178883,1.); +#178883 = DIRECTION('',(0.,-1.,0.)); +#178884 = ORIENTED_EDGE('',*,*,#178885,.T.); +#178885 = EDGE_CURVE('',#178878,#178886,#178888,.T.); +#178886 = VERTEX_POINT('',#178887); +#178887 = CARTESIAN_POINT('',(92.169451,-94.940726,1.585)); +#178888 = LINE('',#178889,#178890); +#178889 = CARTESIAN_POINT('',(91.753628,-94.939285,1.585)); +#178890 = VECTOR('',#178891,1.); +#178891 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#178892 = ORIENTED_EDGE('',*,*,#178893,.T.); +#178893 = EDGE_CURVE('',#178886,#178894,#178896,.T.); +#178894 = VERTEX_POINT('',#178895); +#178895 = CARTESIAN_POINT('',(92.154819,-95.089285,1.585)); +#178896 = CIRCLE('',#178897,7.500006711464E-02); +#178897 = AXIS2_PLACEMENT_3D('',#178898,#178899,#178900); +#178898 = CARTESIAN_POINT('',(92.154819067115,-95.01428493288,1.585)); +#178899 = DIRECTION('',(0.,0.,-1.)); +#178900 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#178901 = ORIENTED_EDGE('',*,*,#178902,.T.); +#178902 = EDGE_CURVE('',#178894,#178903,#178905,.T.); +#178903 = VERTEX_POINT('',#178904); +#178904 = CARTESIAN_POINT('',(91.140187,-95.087844,1.585)); +#178905 = LINE('',#178906,#178907); +#178906 = CARTESIAN_POINT('',(92.154819,-95.089285,1.585)); +#178907 = VECTOR('',#178908,1.); +#178908 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#178909 = ORIENTED_EDGE('',*,*,#178910,.T.); +#178910 = EDGE_CURVE('',#178903,#178911,#178913,.T.); +#178911 = VERTEX_POINT('',#178912); +#178912 = CARTESIAN_POINT('',(91.079819,-95.014285,1.585)); +#178913 = CIRCLE('',#178914,7.500074938986E-02); +#178914 = AXIS2_PLACEMENT_3D('',#178915,#178916,#178917); +#178915 = CARTESIAN_POINT('',(91.154819749388,-95.01428453389,1.585)); +#178916 = DIRECTION('',(0.,0.,-1.)); +#178917 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#178918 = ORIENTED_EDGE('',*,*,#178919,.T.); +#178919 = EDGE_CURVE('',#178911,#178920,#178922,.T.); +#178920 = VERTEX_POINT('',#178921); +#178921 = CARTESIAN_POINT('',(91.082482,-94.613524,1.585)); +#178922 = LINE('',#178923,#178924); +#178923 = CARTESIAN_POINT('',(91.079819,-95.014285,1.585)); +#178924 = VECTOR('',#178925,1.); +#178925 = DIRECTION('',(6.644711463211E-03,0.999977923661,0.)); +#178926 = ORIENTED_EDGE('',*,*,#178927,.T.); +#178927 = EDGE_CURVE('',#178920,#178928,#178930,.T.); +#178928 = VERTEX_POINT('',#178929); +#178929 = CARTESIAN_POINT('',(91.330663,-94.369298,1.585)); +#178930 = CIRCLE('',#178931,0.3486213829); +#178931 = AXIS2_PLACEMENT_3D('',#178932,#178933,#178934); +#178932 = CARTESIAN_POINT('',(91.418423229516,-94.70669244383,1.585)); +#178933 = DIRECTION('',(0.,0.,-1.)); +#178934 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#178935 = ORIENTED_EDGE('',*,*,#178936,.T.); +#178936 = EDGE_CURVE('',#178928,#178937,#178939,.T.); +#178937 = VERTEX_POINT('',#178938); +#178938 = CARTESIAN_POINT('',(91.502784,-94.369298,1.585)); +#178939 = LINE('',#178940,#178941); +#178940 = CARTESIAN_POINT('',(91.330663,-94.369298,1.585)); +#178941 = VECTOR('',#178942,1.); +#178942 = DIRECTION('',(1.,0.,0.)); +#178943 = ORIENTED_EDGE('',*,*,#178944,.T.); +#178944 = EDGE_CURVE('',#178937,#178945,#178947,.T.); +#178945 = VERTEX_POINT('',#178946); +#178946 = CARTESIAN_POINT('',(91.752187,-94.618701,1.585)); +#178947 = CIRCLE('',#178948,0.347870264855); +#178948 = AXIS2_PLACEMENT_3D('',#178949,#178950,#178951); +#178949 = CARTESIAN_POINT('',(91.415456265028,-94.70602873497,1.585)); +#178950 = DIRECTION('',(0.,0.,-1.)); +#178951 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#178952 = ORIENTED_EDGE('',*,*,#178953,.T.); +#178953 = EDGE_CURVE('',#178945,#178851,#178954,.T.); +#178954 = LINE('',#178955,#178956); +#178955 = CARTESIAN_POINT('',(91.752187,-94.618701,1.585)); +#178956 = VECTOR('',#178957,1.); +#178957 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#178958 = FACE_BOUND('',#178959,.F.); +#178959 = EDGE_LOOP('',(#178960,#178971,#178979,#178987,#178995,#179003, + #179011)); +#178960 = ORIENTED_EDGE('',*,*,#178961,.T.); +#178961 = EDGE_CURVE('',#178962,#178964,#178966,.T.); +#178962 = VERTEX_POINT('',#178963); +#178963 = CARTESIAN_POINT('',(91.538963,-94.552115,1.585)); +#178964 = VERTEX_POINT('',#178965); +#178965 = CARTESIAN_POINT('',(91.264077,-94.582522,1.585)); +#178966 = CIRCLE('',#178967,0.198386215365); +#178967 = AXIS2_PLACEMENT_3D('',#178968,#178969,#178970); +#178968 = CARTESIAN_POINT('',(91.417159957837,-94.7087071753,1.585)); +#178969 = DIRECTION('',(0.,0.,1.)); +#178970 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#178971 = ORIENTED_EDGE('',*,*,#178972,.T.); +#178972 = EDGE_CURVE('',#178964,#178973,#178975,.T.); +#178973 = VERTEX_POINT('',#178974); +#178974 = CARTESIAN_POINT('',(91.229819,-94.651038,1.585)); +#178975 = LINE('',#178976,#178977); +#178976 = CARTESIAN_POINT('',(91.264077,-94.582522,1.585)); +#178977 = VECTOR('',#178978,1.); +#178978 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#178979 = ORIENTED_EDGE('',*,*,#178980,.T.); +#178980 = EDGE_CURVE('',#178973,#178981,#178983,.T.); +#178981 = VERTEX_POINT('',#178982); +#178982 = CARTESIAN_POINT('',(91.229819,-94.939285,1.585)); +#178983 = LINE('',#178984,#178985); +#178984 = CARTESIAN_POINT('',(91.229819,-94.651038,1.585)); +#178985 = VECTOR('',#178986,1.); +#178986 = DIRECTION('',(0.,-1.,0.)); +#178987 = ORIENTED_EDGE('',*,*,#178988,.T.); +#178988 = EDGE_CURVE('',#178981,#178989,#178991,.T.); +#178989 = VERTEX_POINT('',#178990); +#178990 = CARTESIAN_POINT('',(91.603628,-94.939285,1.585)); +#178991 = LINE('',#178992,#178993); +#178992 = CARTESIAN_POINT('',(91.229819,-94.939285,1.585)); +#178993 = VECTOR('',#178994,1.); +#178994 = DIRECTION('',(1.,0.,0.)); +#178995 = ORIENTED_EDGE('',*,*,#178996,.T.); +#178996 = EDGE_CURVE('',#178989,#178997,#178999,.T.); +#178997 = VERTEX_POINT('',#178998); +#178998 = CARTESIAN_POINT('',(91.603628,-94.651038,1.585)); +#178999 = LINE('',#179000,#179001); +#179000 = CARTESIAN_POINT('',(91.603628,-94.939285,1.585)); +#179001 = VECTOR('',#179002,1.); +#179002 = DIRECTION('',(0.,1.,0.)); +#179003 = ORIENTED_EDGE('',*,*,#179004,.T.); +#179004 = EDGE_CURVE('',#178997,#179005,#179007,.T.); +#179005 = VERTEX_POINT('',#179006); +#179006 = CARTESIAN_POINT('',(91.56937,-94.582522,1.585)); +#179007 = LINE('',#179008,#179009); +#179008 = CARTESIAN_POINT('',(91.603628,-94.651038,1.585)); +#179009 = VECTOR('',#179010,1.); +#179010 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#179011 = ORIENTED_EDGE('',*,*,#179012,.T.); +#179012 = EDGE_CURVE('',#179005,#178962,#179013,.T.); +#179013 = LINE('',#179014,#179015); +#179014 = CARTESIAN_POINT('',(91.56937,-94.582522,1.585)); +#179015 = VECTOR('',#179016,1.); +#179016 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#179017 = PLANE('',#179018); +#179018 = AXIS2_PLACEMENT_3D('',#179019,#179020,#179021); +#179019 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179020 = DIRECTION('',(0.,0.,1.)); +#179021 = DIRECTION('',(1.,0.,-0.)); +#179022 = SHELL_BASED_SURFACE_MODEL('',(#179023)); +#179023 = OPEN_SHELL('',(#179024)); +#179024 = ADVANCED_FACE('',(#179025),#179061,.T.); +#179025 = FACE_BOUND('',#179026,.F.); +#179026 = EDGE_LOOP('',(#179027,#179038,#179046,#179055)); +#179027 = ORIENTED_EDGE('',*,*,#179028,.T.); +#179028 = EDGE_CURVE('',#179029,#179031,#179033,.T.); +#179029 = VERTEX_POINT('',#179030); +#179030 = CARTESIAN_POINT('',(93.954392,-94.9056,1.585)); +#179031 = VERTEX_POINT('',#179032); +#179032 = CARTESIAN_POINT('',(93.954392,-94.7856,1.585)); +#179033 = CIRCLE('',#179034,6.000000000043E-02); +#179034 = AXIS2_PLACEMENT_3D('',#179035,#179036,#179037); +#179035 = CARTESIAN_POINT('',(93.954391774412,-94.8456,1.585)); +#179036 = DIRECTION('',(0.,0.,-1.)); +#179037 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#179038 = ORIENTED_EDGE('',*,*,#179039,.T.); +#179039 = EDGE_CURVE('',#179031,#179040,#179042,.T.); +#179040 = VERTEX_POINT('',#179041); +#179041 = CARTESIAN_POINT('',(94.428908,-94.7856,1.585)); +#179042 = LINE('',#179043,#179044); +#179043 = CARTESIAN_POINT('',(93.954392,-94.7856,1.585)); +#179044 = VECTOR('',#179045,1.); +#179045 = DIRECTION('',(1.,0.,0.)); +#179046 = ORIENTED_EDGE('',*,*,#179047,.T.); +#179047 = EDGE_CURVE('',#179040,#179048,#179050,.T.); +#179048 = VERTEX_POINT('',#179049); +#179049 = CARTESIAN_POINT('',(94.428908,-94.9056,1.585)); +#179050 = CIRCLE('',#179051,6.000000000043E-02); +#179051 = AXIS2_PLACEMENT_3D('',#179052,#179053,#179054); +#179052 = CARTESIAN_POINT('',(94.428908225588,-94.8456,1.585)); +#179053 = DIRECTION('',(0.,0.,-1.)); +#179054 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#179055 = ORIENTED_EDGE('',*,*,#179056,.T.); +#179056 = EDGE_CURVE('',#179048,#179029,#179057,.T.); +#179057 = LINE('',#179058,#179059); +#179058 = CARTESIAN_POINT('',(94.428908,-94.9056,1.585)); +#179059 = VECTOR('',#179060,1.); +#179060 = DIRECTION('',(-1.,0.,0.)); +#179061 = PLANE('',#179062); +#179062 = AXIS2_PLACEMENT_3D('',#179063,#179064,#179065); +#179063 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179064 = DIRECTION('',(0.,0.,1.)); +#179065 = DIRECTION('',(1.,0.,-0.)); +#179066 = SHELL_BASED_SURFACE_MODEL('',(#179067)); +#179067 = OPEN_SHELL('',(#179068)); +#179068 = ADVANCED_FACE('',(#179069),#179105,.T.); +#179069 = FACE_BOUND('',#179070,.F.); +#179070 = EDGE_LOOP('',(#179071,#179082,#179090,#179099)); +#179071 = ORIENTED_EDGE('',*,*,#179072,.T.); +#179072 = EDGE_CURVE('',#179073,#179075,#179077,.T.); +#179073 = VERTEX_POINT('',#179074); +#179074 = CARTESIAN_POINT('',(98.954392,-94.9056,1.585)); +#179075 = VERTEX_POINT('',#179076); +#179076 = CARTESIAN_POINT('',(98.954392,-94.7856,1.585)); +#179077 = CIRCLE('',#179078,6.000000000043E-02); +#179078 = AXIS2_PLACEMENT_3D('',#179079,#179080,#179081); +#179079 = CARTESIAN_POINT('',(98.954391774412,-94.8456,1.585)); +#179080 = DIRECTION('',(0.,0.,-1.)); +#179081 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#179082 = ORIENTED_EDGE('',*,*,#179083,.T.); +#179083 = EDGE_CURVE('',#179075,#179084,#179086,.T.); +#179084 = VERTEX_POINT('',#179085); +#179085 = CARTESIAN_POINT('',(99.428908,-94.7856,1.585)); +#179086 = LINE('',#179087,#179088); +#179087 = CARTESIAN_POINT('',(98.954392,-94.7856,1.585)); +#179088 = VECTOR('',#179089,1.); +#179089 = DIRECTION('',(1.,0.,0.)); +#179090 = ORIENTED_EDGE('',*,*,#179091,.T.); +#179091 = EDGE_CURVE('',#179084,#179092,#179094,.T.); +#179092 = VERTEX_POINT('',#179093); +#179093 = CARTESIAN_POINT('',(99.428908,-94.9056,1.585)); +#179094 = CIRCLE('',#179095,6.000000000043E-02); +#179095 = AXIS2_PLACEMENT_3D('',#179096,#179097,#179098); +#179096 = CARTESIAN_POINT('',(99.428908225588,-94.8456,1.585)); +#179097 = DIRECTION('',(0.,0.,-1.)); +#179098 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#179099 = ORIENTED_EDGE('',*,*,#179100,.T.); +#179100 = EDGE_CURVE('',#179092,#179073,#179101,.T.); +#179101 = LINE('',#179102,#179103); +#179102 = CARTESIAN_POINT('',(99.428908,-94.9056,1.585)); +#179103 = VECTOR('',#179104,1.); +#179104 = DIRECTION('',(-1.,0.,0.)); +#179105 = PLANE('',#179106); +#179106 = AXIS2_PLACEMENT_3D('',#179107,#179108,#179109); +#179107 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179108 = DIRECTION('',(0.,0.,1.)); +#179109 = DIRECTION('',(1.,0.,-0.)); +#179110 = SHELL_BASED_SURFACE_MODEL('',(#179111)); +#179111 = OPEN_SHELL('',(#179112)); +#179112 = ADVANCED_FACE('',(#179113),#179149,.T.); +#179113 = FACE_BOUND('',#179114,.F.); +#179114 = EDGE_LOOP('',(#179115,#179126,#179134,#179143)); +#179115 = ORIENTED_EDGE('',*,*,#179116,.T.); +#179116 = EDGE_CURVE('',#179117,#179119,#179121,.T.); +#179117 = VERTEX_POINT('',#179118); +#179118 = CARTESIAN_POINT('',(134.629392,-94.8606,1.585)); +#179119 = VERTEX_POINT('',#179120); +#179120 = CARTESIAN_POINT('',(134.629392,-94.7406,1.585)); +#179121 = CIRCLE('',#179122,6.000000000043E-02); +#179122 = AXIS2_PLACEMENT_3D('',#179123,#179124,#179125); +#179123 = CARTESIAN_POINT('',(134.62939177441,-94.8006,1.585)); +#179124 = DIRECTION('',(0.,0.,-1.)); +#179125 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#179126 = ORIENTED_EDGE('',*,*,#179127,.T.); +#179127 = EDGE_CURVE('',#179119,#179128,#179130,.T.); +#179128 = VERTEX_POINT('',#179129); +#179129 = CARTESIAN_POINT('',(135.103908,-94.7406,1.585)); +#179130 = LINE('',#179131,#179132); +#179131 = CARTESIAN_POINT('',(134.629392,-94.7406,1.585)); +#179132 = VECTOR('',#179133,1.); +#179133 = DIRECTION('',(1.,0.,0.)); +#179134 = ORIENTED_EDGE('',*,*,#179135,.T.); +#179135 = EDGE_CURVE('',#179128,#179136,#179138,.T.); +#179136 = VERTEX_POINT('',#179137); +#179137 = CARTESIAN_POINT('',(135.103908,-94.8606,1.585)); +#179138 = CIRCLE('',#179139,6.000000000043E-02); +#179139 = AXIS2_PLACEMENT_3D('',#179140,#179141,#179142); +#179140 = CARTESIAN_POINT('',(135.10390822558,-94.8006,1.585)); +#179141 = DIRECTION('',(0.,0.,-1.)); +#179142 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#179143 = ORIENTED_EDGE('',*,*,#179144,.T.); +#179144 = EDGE_CURVE('',#179136,#179117,#179145,.T.); +#179145 = LINE('',#179146,#179147); +#179146 = CARTESIAN_POINT('',(135.103908,-94.8606,1.585)); +#179147 = VECTOR('',#179148,1.); +#179148 = DIRECTION('',(-1.,0.,0.)); +#179149 = PLANE('',#179150); +#179150 = AXIS2_PLACEMENT_3D('',#179151,#179152,#179153); +#179151 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179152 = DIRECTION('',(0.,0.,1.)); +#179153 = DIRECTION('',(1.,0.,-0.)); +#179154 = SHELL_BASED_SURFACE_MODEL('',(#179155)); +#179155 = OPEN_SHELL('',(#179156)); +#179156 = ADVANCED_FACE('',(#179157,#179309),#179377,.T.); +#179157 = FACE_BOUND('',#179158,.F.); +#179158 = EDGE_LOOP('',(#179159,#179170,#179178,#179186,#179194,#179203, + #179211,#179219,#179228,#179236,#179245,#179253,#179261,#179269, + #179278,#179286,#179295,#179303)); +#179159 = ORIENTED_EDGE('',*,*,#179160,.T.); +#179160 = EDGE_CURVE('',#179161,#179163,#179165,.T.); +#179161 = VERTEX_POINT('',#179162); +#179162 = CARTESIAN_POINT('',(96.47932,-94.085672,1.585)); +#179163 = VERTEX_POINT('',#179164); +#179164 = CARTESIAN_POINT('',(96.475792,-93.998808,1.585)); +#179165 = CIRCLE('',#179166,7.226649079677E-02); +#179166 = AXIS2_PLACEMENT_3D('',#179167,#179168,#179169); +#179167 = CARTESIAN_POINT('',(96.535240541535,-94.03989712996,1.585)); +#179168 = DIRECTION('',(0.,0.,-1.)); +#179169 = DIRECTION('',(-0.773810114734,-0.633417639741,-0.)); +#179170 = ORIENTED_EDGE('',*,*,#179171,.T.); +#179171 = EDGE_CURVE('',#179163,#179172,#179174,.T.); +#179172 = VERTEX_POINT('',#179173); +#179173 = CARTESIAN_POINT('',(96.496484,-93.978116,1.585)); +#179174 = LINE('',#179175,#179176); +#179175 = CARTESIAN_POINT('',(96.475792,-93.998808,1.585)); +#179176 = VECTOR('',#179177,1.); +#179177 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#179178 = ORIENTED_EDGE('',*,*,#179179,.T.); +#179179 = EDGE_CURVE('',#179172,#179180,#179182,.T.); +#179180 = VERTEX_POINT('',#179181); +#179181 = CARTESIAN_POINT('',(96.538152,-93.965476,1.585)); +#179182 = LINE('',#179183,#179184); +#179183 = CARTESIAN_POINT('',(96.496484,-93.978116,1.585)); +#179184 = VECTOR('',#179185,1.); +#179185 = DIRECTION('',(0.956939376321,0.29028783999,0.)); +#179186 = ORIENTED_EDGE('',*,*,#179187,.T.); +#179187 = EDGE_CURVE('',#179180,#179188,#179190,.T.); +#179188 = VERTEX_POINT('',#179189); +#179189 = CARTESIAN_POINT('',(97.362308,-93.966917,1.585)); +#179190 = LINE('',#179191,#179192); +#179191 = CARTESIAN_POINT('',(96.538152,-93.965476,1.585)); +#179192 = VECTOR('',#179193,1.); +#179193 = DIRECTION('',(0.999998471455,-1.748452716921E-03,0.)); +#179194 = ORIENTED_EDGE('',*,*,#179195,.T.); +#179195 = EDGE_CURVE('',#179188,#179196,#179198,.T.); +#179196 = VERTEX_POINT('',#179197); +#179197 = CARTESIAN_POINT('',(97.611711,-94.21632,1.585)); +#179198 = CIRCLE('',#179199,0.347870264855); +#179199 = AXIS2_PLACEMENT_3D('',#179200,#179201,#179202); +#179200 = CARTESIAN_POINT('',(97.274980265028,-94.30364773497,1.585)); +#179201 = DIRECTION('',(0.,0.,-1.)); +#179202 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#179203 = ORIENTED_EDGE('',*,*,#179204,.T.); +#179204 = EDGE_CURVE('',#179196,#179205,#179207,.T.); +#179205 = VERTEX_POINT('',#179206); +#179206 = CARTESIAN_POINT('',(97.610489,-94.393619,1.585)); +#179207 = LINE('',#179208,#179209); +#179208 = CARTESIAN_POINT('',(97.611711,-94.21632,1.585)); +#179209 = VECTOR('',#179210,1.); +#179210 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#179211 = ORIENTED_EDGE('',*,*,#179212,.T.); +#179212 = EDGE_CURVE('',#179205,#179213,#179215,.T.); +#179213 = VERTEX_POINT('',#179214); +#179214 = CARTESIAN_POINT('',(97.549783,-94.515031,1.585)); +#179215 = LINE('',#179216,#179217); +#179216 = CARTESIAN_POINT('',(97.610489,-94.393619,1.585)); +#179217 = VECTOR('',#179218,1.); +#179218 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#179219 = ORIENTED_EDGE('',*,*,#179220,.T.); +#179220 = EDGE_CURVE('',#179213,#179221,#179223,.T.); +#179221 = VERTEX_POINT('',#179222); +#179222 = CARTESIAN_POINT('',(97.423451,-94.435506,1.585)); +#179223 = CIRCLE('',#179224,7.500029440362E-02); +#179224 = AXIS2_PLACEMENT_3D('',#179225,#179226,#179227); +#179225 = CARTESIAN_POINT('',(97.490533351324,-94.46904705397,1.585)); +#179226 = DIRECTION('',(-0.,0.,-1.)); +#179227 = DIRECTION('',(0.789992214662,-0.613116873665,-0.)); +#179228 = ORIENTED_EDGE('',*,*,#179229,.T.); +#179229 = EDGE_CURVE('',#179221,#179230,#179232,.T.); +#179230 = VERTEX_POINT('',#179231); +#179231 = CARTESIAN_POINT('',(97.463152,-94.356104,1.585)); +#179232 = LINE('',#179233,#179234); +#179233 = CARTESIAN_POINT('',(97.423451,-94.435506,1.585)); +#179234 = VECTOR('',#179235,1.); +#179235 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#179236 = ORIENTED_EDGE('',*,*,#179237,.T.); +#179237 = EDGE_CURVE('',#179230,#179238,#179240,.T.); +#179238 = VERTEX_POINT('',#179239); +#179239 = CARTESIAN_POINT('',(97.398487,-94.149734,1.585)); +#179240 = CIRCLE('',#179241,0.197624884179); +#179241 = AXIS2_PLACEMENT_3D('',#179242,#179243,#179244); +#179242 = CARTESIAN_POINT('',(97.272969507655,-94.3023805,1.585)); +#179243 = DIRECTION('',(0.,-0.,1.)); +#179244 = DIRECTION('',(0.962340816213,-0.271845826618,-0.)); +#179245 = ORIENTED_EDGE('',*,*,#179246,.T.); +#179246 = EDGE_CURVE('',#179238,#179247,#179249,.T.); +#179247 = VERTEX_POINT('',#179248); +#179248 = CARTESIAN_POINT('',(97.329971,-94.115476,1.585)); +#179249 = LINE('',#179250,#179251); +#179250 = CARTESIAN_POINT('',(97.398487,-94.149734,1.585)); +#179251 = VECTOR('',#179252,1.); +#179252 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#179253 = ORIENTED_EDGE('',*,*,#179254,.T.); +#179254 = EDGE_CURVE('',#179247,#179255,#179257,.T.); +#179255 = VERTEX_POINT('',#179256); +#179256 = CARTESIAN_POINT('',(97.277156,-94.115904,1.585)); +#179257 = LINE('',#179258,#179259); +#179258 = CARTESIAN_POINT('',(97.329971,-94.115476,1.585)); +#179259 = VECTOR('',#179260,1.); +#179260 = DIRECTION('',(-0.999967166167,-8.103492324509E-03,0.)); +#179261 = ORIENTED_EDGE('',*,*,#179262,.T.); +#179262 = EDGE_CURVE('',#179255,#179263,#179265,.T.); +#179263 = VERTEX_POINT('',#179264); +#179264 = CARTESIAN_POINT('',(97.277156,-94.346,1.585)); +#179265 = LINE('',#179266,#179267); +#179266 = CARTESIAN_POINT('',(97.277156,-94.115904,1.585)); +#179267 = VECTOR('',#179268,1.); +#179268 = DIRECTION('',(0.,-1.,0.)); +#179269 = ORIENTED_EDGE('',*,*,#179270,.T.); +#179270 = EDGE_CURVE('',#179263,#179271,#179273,.T.); +#179271 = VERTEX_POINT('',#179272); +#179272 = CARTESIAN_POINT('',(97.028974,-94.590225,1.585)); +#179273 = CIRCLE('',#179274,0.348632713765); +#179274 = AXIS2_PLACEMENT_3D('',#179275,#179276,#179277); +#179275 = CARTESIAN_POINT('',(96.941205973942,-94.25282087627,1.585)); +#179276 = DIRECTION('',(0.,0.,-1.)); +#179277 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#179278 = ORIENTED_EDGE('',*,*,#179279,.T.); +#179279 = EDGE_CURVE('',#179271,#179280,#179282,.T.); +#179280 = VERTEX_POINT('',#179281); +#179281 = CARTESIAN_POINT('',(96.708818,-94.589003,1.585)); +#179282 = LINE('',#179283,#179284); +#179283 = CARTESIAN_POINT('',(97.028974,-94.590225,1.585)); +#179284 = VECTOR('',#179285,1.); +#179285 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#179286 = ORIENTED_EDGE('',*,*,#179287,.T.); +#179287 = EDGE_CURVE('',#179280,#179288,#179290,.T.); +#179288 = VERTEX_POINT('',#179289); +#179289 = CARTESIAN_POINT('',(96.464593,-94.340822,1.585)); +#179290 = CIRCLE('',#179291,0.348628078749); +#179291 = AXIS2_PLACEMENT_3D('',#179292,#179293,#179294); +#179292 = CARTESIAN_POINT('',(96.801993030202,-94.25305664857,1.585)); +#179293 = DIRECTION('',(0.,0.,-1.)); +#179294 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#179295 = ORIENTED_EDGE('',*,*,#179296,.T.); +#179296 = EDGE_CURVE('',#179288,#179297,#179299,.T.); +#179297 = VERTEX_POINT('',#179298); +#179298 = CARTESIAN_POINT('',(96.465815,-94.115905,1.585)); +#179299 = LINE('',#179300,#179301); +#179300 = CARTESIAN_POINT('',(96.464593,-94.340822,1.585)); +#179301 = VECTOR('',#179302,1.); +#179302 = DIRECTION('',(5.433035139454E-03,0.999985240956,0.)); +#179303 = ORIENTED_EDGE('',*,*,#179304,.T.); +#179304 = EDGE_CURVE('',#179297,#179161,#179305,.T.); +#179305 = LINE('',#179306,#179307); +#179306 = CARTESIAN_POINT('',(96.465815,-94.115905,1.585)); +#179307 = VECTOR('',#179308,1.); +#179308 = DIRECTION('',(0.407855431141,0.913046519784,0.)); +#179309 = FACE_BOUND('',#179310,.F.); +#179310 = EDGE_LOOP('',(#179311,#179321,#179329,#179337,#179345,#179354, + #179362,#179371)); +#179311 = ORIENTED_EDGE('',*,*,#179312,.T.); +#179312 = EDGE_CURVE('',#179313,#179315,#179317,.T.); +#179313 = VERTEX_POINT('',#179314); +#179314 = CARTESIAN_POINT('',(97.129819,-94.153419,1.585)); +#179315 = VERTEX_POINT('',#179316); +#179316 = CARTESIAN_POINT('',(97.110847,-94.115476,1.585)); +#179317 = LINE('',#179318,#179319); +#179318 = CARTESIAN_POINT('',(97.129819,-94.153419,1.585)); +#179319 = VECTOR('',#179320,1.); +#179320 = DIRECTION('',(-0.447223024592,0.894422476392,0.)); +#179321 = ORIENTED_EDGE('',*,*,#179322,.T.); +#179322 = EDGE_CURVE('',#179315,#179323,#179325,.T.); +#179323 = VERTEX_POINT('',#179324); +#179324 = CARTESIAN_POINT('',(96.632124,-94.115476,1.585)); +#179325 = LINE('',#179326,#179327); +#179326 = CARTESIAN_POINT('',(97.110847,-94.115476,1.585)); +#179327 = VECTOR('',#179328,1.); +#179328 = DIRECTION('',(-1.,0.,0.)); +#179329 = ORIENTED_EDGE('',*,*,#179330,.T.); +#179330 = EDGE_CURVE('',#179323,#179331,#179333,.T.); +#179331 = VERTEX_POINT('',#179332); +#179332 = CARTESIAN_POINT('',(96.613152,-94.153419,1.585)); +#179333 = LINE('',#179334,#179335); +#179334 = CARTESIAN_POINT('',(96.632124,-94.115476,1.585)); +#179335 = VECTOR('',#179336,1.); +#179336 = DIRECTION('',(-0.447223024592,-0.894422476392,0.)); +#179337 = ORIENTED_EDGE('',*,*,#179338,.T.); +#179338 = EDGE_CURVE('',#179331,#179339,#179341,.T.); +#179339 = VERTEX_POINT('',#179340); +#179340 = CARTESIAN_POINT('',(96.613152,-94.308485,1.585)); +#179341 = LINE('',#179342,#179343); +#179342 = CARTESIAN_POINT('',(96.613152,-94.153419,1.585)); +#179343 = VECTOR('',#179344,1.); +#179344 = DIRECTION('',(0.,-1.,0.)); +#179345 = ORIENTED_EDGE('',*,*,#179346,.T.); +#179346 = EDGE_CURVE('',#179339,#179347,#179349,.T.); +#179347 = VERTEX_POINT('',#179348); +#179348 = CARTESIAN_POINT('',(96.746333,-94.441666,1.585)); +#179349 = CIRCLE('',#179350,0.18686440374); +#179350 = AXIS2_PLACEMENT_3D('',#179351,#179352,#179353); +#179351 = CARTESIAN_POINT('',(96.793869,-94.260949,1.585)); +#179352 = DIRECTION('',(0.,0.,1.)); +#179353 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#179354 = ORIENTED_EDGE('',*,*,#179355,.T.); +#179355 = EDGE_CURVE('',#179347,#179356,#179358,.T.); +#179356 = VERTEX_POINT('',#179357); +#179357 = CARTESIAN_POINT('',(96.996637,-94.441666,1.585)); +#179358 = LINE('',#179359,#179360); +#179359 = CARTESIAN_POINT('',(96.746333,-94.441666,1.585)); +#179360 = VECTOR('',#179361,1.); +#179361 = DIRECTION('',(1.,0.,0.)); +#179362 = ORIENTED_EDGE('',*,*,#179363,.T.); +#179363 = EDGE_CURVE('',#179356,#179364,#179366,.T.); +#179364 = VERTEX_POINT('',#179365); +#179365 = CARTESIAN_POINT('',(97.129819,-94.308485,1.585)); +#179366 = CIRCLE('',#179367,0.186872595955); +#179367 = AXIS2_PLACEMENT_3D('',#179368,#179369,#179370); +#179368 = CARTESIAN_POINT('',(96.94909536766,-94.26094201068,1.585)); +#179369 = DIRECTION('',(0.,0.,1.)); +#179370 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#179371 = ORIENTED_EDGE('',*,*,#179372,.T.); +#179372 = EDGE_CURVE('',#179364,#179313,#179373,.T.); +#179373 = LINE('',#179374,#179375); +#179374 = CARTESIAN_POINT('',(97.129819,-94.308485,1.585)); +#179375 = VECTOR('',#179376,1.); +#179376 = DIRECTION('',(0.,1.,0.)); +#179377 = PLANE('',#179378); +#179378 = AXIS2_PLACEMENT_3D('',#179379,#179380,#179381); +#179379 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179380 = DIRECTION('',(0.,0.,1.)); +#179381 = DIRECTION('',(1.,0.,-0.)); +#179382 = SHELL_BASED_SURFACE_MODEL('',(#179383)); +#179383 = OPEN_SHELL('',(#179384)); +#179384 = ADVANCED_FACE('',(#179385,#179573),#179707,.T.); +#179385 = FACE_BOUND('',#179386,.F.); +#179386 = EDGE_LOOP('',(#179387,#179398,#179406,#179414,#179422,#179430, + #179438,#179446,#179454,#179462,#179470,#179479,#179487,#179495, + #179503,#179511,#179519,#179527,#179535,#179543,#179551,#179559, + #179567)); +#179387 = ORIENTED_EDGE('',*,*,#179388,.T.); +#179388 = EDGE_CURVE('',#179389,#179391,#179393,.T.); +#179389 = VERTEX_POINT('',#179390); +#179390 = CARTESIAN_POINT('',(105.485147,-93.362418,1.585)); +#179391 = VERTEX_POINT('',#179392); +#179392 = CARTESIAN_POINT('',(105.953218,-93.367786,1.585)); +#179393 = CIRCLE('',#179394,0.397578964435); +#179394 = AXIS2_PLACEMENT_3D('',#179395,#179396,#179397); +#179395 = CARTESIAN_POINT('',(105.71549697212,-93.68646726061,1.585)); +#179396 = DIRECTION('',(0.,0.,-1.)); +#179397 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#179398 = ORIENTED_EDGE('',*,*,#179399,.T.); +#179399 = EDGE_CURVE('',#179391,#179400,#179402,.T.); +#179400 = VERTEX_POINT('',#179401); +#179401 = CARTESIAN_POINT('',(106.063534,-93.479108,1.585)); +#179402 = LINE('',#179403,#179404); +#179403 = CARTESIAN_POINT('',(105.953218,-93.367786,1.585)); +#179404 = VECTOR('',#179405,1.); +#179405 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#179406 = ORIENTED_EDGE('',*,*,#179407,.T.); +#179407 = EDGE_CURVE('',#179400,#179408,#179410,.T.); +#179408 = VERTEX_POINT('',#179409); +#179409 = CARTESIAN_POINT('',(106.073934,-93.502586,1.585)); +#179410 = LINE('',#179411,#179412); +#179411 = CARTESIAN_POINT('',(106.063534,-93.479108,1.585)); +#179412 = VECTOR('',#179413,1.); +#179413 = DIRECTION('',(0.405010807319,-0.914311897524,0.)); +#179414 = ORIENTED_EDGE('',*,*,#179415,.T.); +#179415 = EDGE_CURVE('',#179408,#179416,#179418,.T.); +#179416 = VERTEX_POINT('',#179417); +#179417 = CARTESIAN_POINT('',(106.123792,-93.711252,1.585)); +#179418 = LINE('',#179419,#179420); +#179419 = CARTESIAN_POINT('',(106.073934,-93.502586,1.585)); +#179420 = VECTOR('',#179421,1.); +#179421 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#179422 = ORIENTED_EDGE('',*,*,#179423,.T.); +#179423 = EDGE_CURVE('',#179416,#179424,#179426,.T.); +#179424 = VERTEX_POINT('',#179425); +#179425 = CARTESIAN_POINT('',(106.121553,-94.062775,1.585)); +#179426 = LINE('',#179427,#179428); +#179427 = CARTESIAN_POINT('',(106.123792,-93.711252,1.585)); +#179428 = VECTOR('',#179429,1.); +#179429 = DIRECTION('',(-6.369297552953E-03,-0.999979715819,0.)); +#179430 = ORIENTED_EDGE('',*,*,#179431,.T.); +#179431 = EDGE_CURVE('',#179424,#179432,#179434,.T.); +#179432 = VERTEX_POINT('',#179433); +#179433 = CARTESIAN_POINT('',(106.068987,-94.267097,1.585)); +#179434 = LINE('',#179435,#179436); +#179435 = CARTESIAN_POINT('',(106.121553,-94.062775,1.585)); +#179436 = VECTOR('',#179437,1.); +#179437 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#179438 = ORIENTED_EDGE('',*,*,#179439,.T.); +#179439 = EDGE_CURVE('',#179432,#179440,#179442,.T.); +#179440 = VERTEX_POINT('',#179441); +#179441 = CARTESIAN_POINT('',(106.054207,-94.288093,1.585)); +#179442 = LINE('',#179443,#179444); +#179443 = CARTESIAN_POINT('',(106.068987,-94.267097,1.585)); +#179444 = VECTOR('',#179445,1.); +#179445 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#179446 = ORIENTED_EDGE('',*,*,#179447,.T.); +#179447 = EDGE_CURVE('',#179440,#179448,#179450,.T.); +#179448 = VERTEX_POINT('',#179449); +#179449 = CARTESIAN_POINT('',(106.012,-94.330299,1.585)); +#179450 = LINE('',#179451,#179452); +#179451 = CARTESIAN_POINT('',(106.054207,-94.288093,1.585)); +#179452 = VECTOR('',#179453,1.); +#179453 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#179454 = ORIENTED_EDGE('',*,*,#179455,.T.); +#179455 = EDGE_CURVE('',#179448,#179456,#179458,.T.); +#179456 = VERTEX_POINT('',#179457); +#179457 = CARTESIAN_POINT('',(106.0456,-94.363899,1.585)); +#179458 = LINE('',#179459,#179460); +#179459 = CARTESIAN_POINT('',(106.012,-94.330299,1.585)); +#179460 = VECTOR('',#179461,1.); +#179461 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#179462 = ORIENTED_EDGE('',*,*,#179463,.T.); +#179463 = EDGE_CURVE('',#179456,#179464,#179466,.T.); +#179464 = VERTEX_POINT('',#179465); +#179465 = CARTESIAN_POINT('',(106.142395,-94.413907,1.585)); +#179466 = LINE('',#179467,#179468); +#179467 = CARTESIAN_POINT('',(106.0456,-94.363899,1.585)); +#179468 = VECTOR('',#179469,1.); +#179469 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#179470 = ORIENTED_EDGE('',*,*,#179471,.T.); +#179471 = EDGE_CURVE('',#179464,#179472,#179474,.T.); +#179472 = VERTEX_POINT('',#179473); +#179473 = CARTESIAN_POINT('',(106.06287,-94.540239,1.585)); +#179474 = CIRCLE('',#179475,7.500029440362E-02); +#179475 = AXIS2_PLACEMENT_3D('',#179476,#179477,#179478); +#179476 = CARTESIAN_POINT('',(106.09641105397,-94.47315664867,1.585)); +#179477 = DIRECTION('',(0.,0.,-1.)); +#179478 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#179479 = ORIENTED_EDGE('',*,*,#179480,.T.); +#179480 = EDGE_CURVE('',#179472,#179481,#179483,.T.); +#179481 = VERTEX_POINT('',#179482); +#179482 = CARTESIAN_POINT('',(105.95389,-94.483291,1.585)); +#179483 = LINE('',#179484,#179485); +#179484 = CARTESIAN_POINT('',(106.06287,-94.540239,1.585)); +#179485 = VECTOR('',#179486,1.); +#179486 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#179487 = ORIENTED_EDGE('',*,*,#179488,.T.); +#179488 = EDGE_CURVE('',#179481,#179489,#179491,.T.); +#179489 = VERTEX_POINT('',#179490); +#179490 = CARTESIAN_POINT('',(105.891126,-94.421557,1.585)); +#179491 = LINE('',#179492,#179493); +#179492 = CARTESIAN_POINT('',(105.95389,-94.483291,1.585)); +#179493 = VECTOR('',#179494,1.); +#179494 = DIRECTION('',(-0.712932436519,0.701232729527,0.)); +#179495 = ORIENTED_EDGE('',*,*,#179496,.T.); +#179496 = EDGE_CURVE('',#179489,#179497,#179499,.T.); +#179497 = VERTEX_POINT('',#179498); +#179498 = CARTESIAN_POINT('',(105.825329,-94.451478,1.585)); +#179499 = LINE('',#179500,#179501); +#179500 = CARTESIAN_POINT('',(105.891126,-94.421557,1.585)); +#179501 = VECTOR('',#179502,1.); +#179502 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#179503 = ORIENTED_EDGE('',*,*,#179504,.T.); +#179504 = EDGE_CURVE('',#179497,#179505,#179507,.T.); +#179505 = VERTEX_POINT('',#179506); +#179506 = CARTESIAN_POINT('',(105.600411,-94.450256,1.585)); +#179507 = LINE('',#179508,#179509); +#179508 = CARTESIAN_POINT('',(105.825329,-94.451478,1.585)); +#179509 = VECTOR('',#179510,1.); +#179510 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#179511 = ORIENTED_EDGE('',*,*,#179512,.T.); +#179512 = EDGE_CURVE('',#179505,#179513,#179515,.T.); +#179513 = VERTEX_POINT('',#179514); +#179514 = CARTESIAN_POINT('',(105.4777,-94.388053,1.585)); +#179515 = LINE('',#179516,#179517); +#179516 = CARTESIAN_POINT('',(105.600411,-94.450256,1.585)); +#179517 = VECTOR('',#179518,1.); +#179518 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#179519 = ORIENTED_EDGE('',*,*,#179520,.T.); +#179520 = EDGE_CURVE('',#179513,#179521,#179523,.T.); +#179521 = VERTEX_POINT('',#179522); +#179522 = CARTESIAN_POINT('',(105.367384,-94.276728,1.585)); +#179523 = LINE('',#179524,#179525); +#179524 = CARTESIAN_POINT('',(105.4777,-94.388053,1.585)); +#179525 = VECTOR('',#179526,1.); +#179526 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#179527 = ORIENTED_EDGE('',*,*,#179528,.T.); +#179528 = EDGE_CURVE('',#179521,#179529,#179531,.T.); +#179529 = VERTEX_POINT('',#179530); +#179530 = CARTESIAN_POINT('',(105.356984,-94.253251,1.585)); +#179531 = LINE('',#179532,#179533); +#179532 = CARTESIAN_POINT('',(105.367384,-94.276728,1.585)); +#179533 = VECTOR('',#179534,1.); +#179534 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#179535 = ORIENTED_EDGE('',*,*,#179536,.T.); +#179536 = EDGE_CURVE('',#179529,#179537,#179539,.T.); +#179537 = VERTEX_POINT('',#179538); +#179538 = CARTESIAN_POINT('',(105.307126,-94.044585,1.585)); +#179539 = LINE('',#179540,#179541); +#179540 = CARTESIAN_POINT('',(105.356984,-94.253251,1.585)); +#179541 = VECTOR('',#179542,1.); +#179542 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#179543 = ORIENTED_EDGE('',*,*,#179544,.T.); +#179544 = EDGE_CURVE('',#179537,#179545,#179547,.T.); +#179545 = VERTEX_POINT('',#179546); +#179546 = CARTESIAN_POINT('',(105.309365,-93.693062,1.585)); +#179547 = LINE('',#179548,#179549); +#179548 = CARTESIAN_POINT('',(105.307126,-94.044585,1.585)); +#179549 = VECTOR('',#179550,1.); +#179550 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#179551 = ORIENTED_EDGE('',*,*,#179552,.T.); +#179552 = EDGE_CURVE('',#179545,#179553,#179555,.T.); +#179553 = VERTEX_POINT('',#179554); +#179554 = CARTESIAN_POINT('',(105.361931,-93.48874,1.585)); +#179555 = LINE('',#179556,#179557); +#179556 = CARTESIAN_POINT('',(105.309365,-93.693062,1.585)); +#179557 = VECTOR('',#179558,1.); +#179558 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#179559 = ORIENTED_EDGE('',*,*,#179560,.T.); +#179560 = EDGE_CURVE('',#179553,#179561,#179563,.T.); +#179561 = VERTEX_POINT('',#179562); +#179562 = CARTESIAN_POINT('',(105.376712,-93.467743,1.585)); +#179563 = LINE('',#179564,#179565); +#179564 = CARTESIAN_POINT('',(105.361931,-93.48874,1.585)); +#179565 = VECTOR('',#179566,1.); +#179566 = DIRECTION('',(0.575632310301,0.817708654313,0.)); +#179567 = ORIENTED_EDGE('',*,*,#179568,.T.); +#179568 = EDGE_CURVE('',#179561,#179389,#179569,.T.); +#179569 = LINE('',#179570,#179571); +#179570 = CARTESIAN_POINT('',(105.376712,-93.467743,1.585)); +#179571 = VECTOR('',#179572,1.); +#179572 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#179573 = FACE_BOUND('',#179574,.F.); +#179574 = EDGE_LOOP('',(#179575,#179586,#179594,#179603,#179611,#179619, + #179627,#179635,#179643,#179651,#179660,#179668,#179676,#179684, + #179692,#179701)); +#179575 = ORIENTED_EDGE('',*,*,#179576,.T.); +#179576 = EDGE_CURVE('',#179577,#179579,#179581,.T.); +#179577 = VERTEX_POINT('',#179578); +#179578 = CARTESIAN_POINT('',(105.861508,-93.487177,1.585)); +#179579 = VERTEX_POINT('',#179580); +#179580 = CARTESIAN_POINT('',(105.56941,-93.487177,1.585)); +#179581 = CIRCLE('',#179582,0.252889603602); +#179582 = AXIS2_PLACEMENT_3D('',#179583,#179584,#179585); +#179583 = CARTESIAN_POINT('',(105.715459,-93.69363,1.585)); +#179584 = DIRECTION('',(0.,0.,1.)); +#179585 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#179586 = ORIENTED_EDGE('',*,*,#179587,.T.); +#179587 = EDGE_CURVE('',#179579,#179588,#179590,.T.); +#179588 = VERTEX_POINT('',#179589); +#179589 = CARTESIAN_POINT('',(105.497467,-93.559119,1.585)); +#179590 = LINE('',#179591,#179592); +#179591 = CARTESIAN_POINT('',(105.56941,-93.487177,1.585)); +#179592 = VECTOR('',#179593,1.); +#179593 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#179594 = ORIENTED_EDGE('',*,*,#179595,.T.); +#179595 = EDGE_CURVE('',#179588,#179596,#179598,.T.); +#179596 = VERTEX_POINT('',#179597); +#179597 = CARTESIAN_POINT('',(105.497467,-94.196717,1.585)); +#179598 = CIRCLE('',#179599,0.985308713638); +#179599 = AXIS2_PLACEMENT_3D('',#179600,#179601,#179602); +#179600 = CARTESIAN_POINT('',(106.4297762077,-93.877918,1.585)); +#179601 = DIRECTION('',(0.,0.,1.)); +#179602 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#179603 = ORIENTED_EDGE('',*,*,#179604,.T.); +#179604 = EDGE_CURVE('',#179596,#179605,#179607,.T.); +#179605 = VERTEX_POINT('',#179606); +#179606 = CARTESIAN_POINT('',(105.56941,-94.268661,1.585)); +#179607 = LINE('',#179608,#179609); +#179608 = CARTESIAN_POINT('',(105.497467,-94.196717,1.585)); +#179609 = VECTOR('',#179610,1.); +#179610 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#179611 = ORIENTED_EDGE('',*,*,#179612,.T.); +#179612 = EDGE_CURVE('',#179605,#179613,#179615,.T.); +#179613 = VERTEX_POINT('',#179614); +#179614 = CARTESIAN_POINT('',(105.637926,-94.302919,1.585)); +#179615 = LINE('',#179616,#179617); +#179616 = CARTESIAN_POINT('',(105.56941,-94.268661,1.585)); +#179617 = VECTOR('',#179618,1.); +#179618 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#179619 = ORIENTED_EDGE('',*,*,#179620,.T.); +#179620 = EDGE_CURVE('',#179613,#179621,#179623,.T.); +#179621 = VERTEX_POINT('',#179622); +#179622 = CARTESIAN_POINT('',(105.772489,-94.302919,1.585)); +#179623 = LINE('',#179624,#179625); +#179624 = CARTESIAN_POINT('',(105.637926,-94.302919,1.585)); +#179625 = VECTOR('',#179626,1.); +#179626 = DIRECTION('',(1.,0.,0.)); +#179627 = ORIENTED_EDGE('',*,*,#179628,.T.); +#179628 = EDGE_CURVE('',#179621,#179629,#179631,.T.); +#179629 = VERTEX_POINT('',#179630); +#179630 = CARTESIAN_POINT('',(105.71865,-94.24908,1.585)); +#179631 = LINE('',#179632,#179633); +#179632 = CARTESIAN_POINT('',(105.772489,-94.302919,1.585)); +#179633 = VECTOR('',#179634,1.); +#179634 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179635 = ORIENTED_EDGE('',*,*,#179636,.T.); +#179636 = EDGE_CURVE('',#179629,#179637,#179639,.T.); +#179637 = VERTEX_POINT('',#179638); +#179638 = CARTESIAN_POINT('',(105.650135,-94.214823,1.585)); +#179639 = LINE('',#179640,#179641); +#179640 = CARTESIAN_POINT('',(105.71865,-94.24908,1.585)); +#179641 = VECTOR('',#179642,1.); +#179642 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#179643 = ORIENTED_EDGE('',*,*,#179644,.T.); +#179644 = EDGE_CURVE('',#179637,#179645,#179647,.T.); +#179645 = VERTEX_POINT('',#179646); +#179646 = CARTESIAN_POINT('',(105.55797,-94.213382,1.585)); +#179647 = LINE('',#179648,#179649); +#179648 = CARTESIAN_POINT('',(105.650135,-94.214823,1.585)); +#179649 = VECTOR('',#179650,1.); +#179650 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#179651 = ORIENTED_EDGE('',*,*,#179652,.T.); +#179652 = EDGE_CURVE('',#179645,#179653,#179655,.T.); +#179653 = VERTEX_POINT('',#179654); +#179654 = CARTESIAN_POINT('',(105.572602,-94.064823,1.585)); +#179655 = CIRCLE('',#179656,7.500006711464E-02); +#179656 = AXIS2_PLACEMENT_3D('',#179657,#179658,#179659); +#179657 = CARTESIAN_POINT('',(105.57260193288,-94.13982306711,1.585)); +#179658 = DIRECTION('',(0.,0.,-1.)); +#179659 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#179660 = ORIENTED_EDGE('',*,*,#179661,.T.); +#179661 = EDGE_CURVE('',#179653,#179662,#179664,.T.); +#179662 = VERTEX_POINT('',#179663); +#179663 = CARTESIAN_POINT('',(105.687649,-94.067486,1.585)); +#179664 = LINE('',#179665,#179666); +#179665 = CARTESIAN_POINT('',(105.572602,-94.064823,1.585)); +#179666 = VECTOR('',#179667,1.); +#179667 = DIRECTION('',(0.999732214371,-2.314086318521E-02,0.)); +#179668 = ORIENTED_EDGE('',*,*,#179669,.T.); +#179669 = EDGE_CURVE('',#179662,#179670,#179672,.T.); +#179670 = VERTEX_POINT('',#179671); +#179671 = CARTESIAN_POINT('',(105.810361,-94.12969,1.585)); +#179672 = LINE('',#179673,#179674); +#179673 = CARTESIAN_POINT('',(105.687649,-94.067486,1.585)); +#179674 = VECTOR('',#179675,1.); +#179675 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#179676 = ORIENTED_EDGE('',*,*,#179677,.T.); +#179677 = EDGE_CURVE('',#179670,#179678,#179680,.T.); +#179678 = VERTEX_POINT('',#179679); +#179679 = CARTESIAN_POINT('',(105.905934,-94.224233,1.585)); +#179680 = LINE('',#179681,#179682); +#179681 = CARTESIAN_POINT('',(105.810361,-94.12969,1.585)); +#179682 = VECTOR('',#179683,1.); +#179683 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#179684 = ORIENTED_EDGE('',*,*,#179685,.T.); +#179685 = EDGE_CURVE('',#179678,#179686,#179688,.T.); +#179686 = VERTEX_POINT('',#179687); +#179687 = CARTESIAN_POINT('',(105.93345,-94.196717,1.585)); +#179688 = LINE('',#179689,#179690); +#179689 = CARTESIAN_POINT('',(105.905934,-94.224233,1.585)); +#179690 = VECTOR('',#179691,1.); +#179691 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#179692 = ORIENTED_EDGE('',*,*,#179693,.T.); +#179693 = EDGE_CURVE('',#179686,#179694,#179696,.T.); +#179694 = VERTEX_POINT('',#179695); +#179695 = CARTESIAN_POINT('',(105.93345,-93.559119,1.585)); +#179696 = CIRCLE('',#179697,0.985282207896); +#179697 = AXIS2_PLACEMENT_3D('',#179698,#179699,#179700); +#179698 = CARTESIAN_POINT('',(105.00116880486,-93.877918,1.585)); +#179699 = DIRECTION('',(0.,-0.,1.)); +#179700 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#179701 = ORIENTED_EDGE('',*,*,#179702,.T.); +#179702 = EDGE_CURVE('',#179694,#179577,#179703,.T.); +#179703 = LINE('',#179704,#179705); +#179704 = CARTESIAN_POINT('',(105.93345,-93.559119,1.585)); +#179705 = VECTOR('',#179706,1.); +#179706 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179707 = PLANE('',#179708); +#179708 = AXIS2_PLACEMENT_3D('',#179709,#179710,#179711); +#179709 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179710 = DIRECTION('',(0.,0.,1.)); +#179711 = DIRECTION('',(1.,0.,-0.)); +#179712 = SHELL_BASED_SURFACE_MODEL('',(#179713)); +#179713 = OPEN_SHELL('',(#179714)); +#179714 = ADVANCED_FACE('',(#179715),#179874,.T.); +#179715 = FACE_BOUND('',#179716,.F.); +#179716 = EDGE_LOOP('',(#179717,#179728,#179736,#179744,#179752,#179760, + #179768,#179776,#179785,#179793,#179802,#179810,#179818,#179826, + #179835,#179843,#179851,#179859,#179868)); +#179717 = ORIENTED_EDGE('',*,*,#179718,.T.); +#179718 = EDGE_CURVE('',#179719,#179721,#179723,.T.); +#179719 = VERTEX_POINT('',#179720); +#179720 = CARTESIAN_POINT('',(106.443823,-93.358456,1.585)); +#179721 = VERTEX_POINT('',#179722); +#179722 = CARTESIAN_POINT('',(106.953218,-93.367786,1.585)); +#179723 = CIRCLE('',#179724,0.450326844012); +#179724 = AXIS2_PLACEMENT_3D('',#179725,#179726,#179727); +#179725 = CARTESIAN_POINT('',(106.6917200301,-93.73440989199,1.585)); +#179726 = DIRECTION('',(0.,0.,-1.)); +#179727 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#179728 = ORIENTED_EDGE('',*,*,#179729,.T.); +#179729 = EDGE_CURVE('',#179721,#179730,#179732,.T.); +#179730 = VERTEX_POINT('',#179731); +#179731 = CARTESIAN_POINT('',(107.016671,-93.433316,1.585)); +#179732 = LINE('',#179733,#179734); +#179733 = CARTESIAN_POINT('',(106.953218,-93.367786,1.585)); +#179734 = VECTOR('',#179735,1.); +#179735 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#179736 = ORIENTED_EDGE('',*,*,#179737,.T.); +#179737 = EDGE_CURVE('',#179730,#179738,#179740,.T.); +#179738 = VERTEX_POINT('',#179739); +#179739 = CARTESIAN_POINT('',(107.074732,-93.553763,1.585)); +#179740 = LINE('',#179741,#179742); +#179741 = CARTESIAN_POINT('',(107.016671,-93.433316,1.585)); +#179742 = VECTOR('',#179743,1.); +#179743 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#179744 = ORIENTED_EDGE('',*,*,#179745,.T.); +#179745 = EDGE_CURVE('',#179738,#179746,#179748,.T.); +#179746 = VERTEX_POINT('',#179747); +#179747 = CARTESIAN_POINT('',(107.073973,-93.680095,1.585)); +#179748 = LINE('',#179749,#179750); +#179749 = CARTESIAN_POINT('',(107.074732,-93.553763,1.585)); +#179750 = VECTOR('',#179751,1.); +#179751 = DIRECTION('',(-6.007870547546E-03,-0.999981952583,0.)); +#179752 = ORIENTED_EDGE('',*,*,#179753,.T.); +#179753 = EDGE_CURVE('',#179746,#179754,#179756,.T.); +#179754 = VERTEX_POINT('',#179755); +#179755 = CARTESIAN_POINT('',(107.015915,-93.848158,1.585)); +#179756 = LINE('',#179757,#179758); +#179757 = CARTESIAN_POINT('',(107.073973,-93.680095,1.585)); +#179758 = VECTOR('',#179759,1.); +#179759 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#179760 = ORIENTED_EDGE('',*,*,#179761,.T.); +#179761 = EDGE_CURVE('',#179754,#179762,#179764,.T.); +#179762 = VERTEX_POINT('',#179763); +#179763 = CARTESIAN_POINT('',(106.563192,-94.302919,1.585)); +#179764 = LINE('',#179765,#179766); +#179765 = CARTESIAN_POINT('',(107.015915,-93.848158,1.585)); +#179766 = VECTOR('',#179767,1.); +#179767 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#179768 = ORIENTED_EDGE('',*,*,#179769,.T.); +#179769 = EDGE_CURVE('',#179762,#179770,#179772,.T.); +#179770 = VERTEX_POINT('',#179771); +#179771 = CARTESIAN_POINT('',(107.015805,-94.30436,1.585)); +#179772 = LINE('',#179773,#179774); +#179773 = CARTESIAN_POINT('',(106.563192,-94.302919,1.585)); +#179774 = VECTOR('',#179775,1.); +#179775 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#179776 = ORIENTED_EDGE('',*,*,#179777,.T.); +#179777 = EDGE_CURVE('',#179770,#179778,#179780,.T.); +#179778 = VERTEX_POINT('',#179779); +#179779 = CARTESIAN_POINT('',(107.001173,-94.452919,1.585)); +#179780 = CIRCLE('',#179781,7.500006711464E-02); +#179781 = AXIS2_PLACEMENT_3D('',#179782,#179783,#179784); +#179782 = CARTESIAN_POINT('',(107.00117306711,-94.37791893288,1.585)); +#179783 = DIRECTION('',(0.,0.,-1.)); +#179784 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#179785 = ORIENTED_EDGE('',*,*,#179786,.T.); +#179786 = EDGE_CURVE('',#179778,#179787,#179789,.T.); +#179787 = VERTEX_POINT('',#179788); +#179788 = CARTESIAN_POINT('',(106.367494,-94.451478,1.585)); +#179789 = LINE('',#179790,#179791); +#179790 = CARTESIAN_POINT('',(107.001173,-94.452919,1.585)); +#179791 = VECTOR('',#179792,1.); +#179792 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#179793 = ORIENTED_EDGE('',*,*,#179794,.T.); +#179794 = EDGE_CURVE('',#179787,#179795,#179797,.T.); +#179795 = VERTEX_POINT('',#179796); +#179796 = CARTESIAN_POINT('',(106.329093,-94.324886,1.585)); +#179797 = CIRCLE('',#179798,7.500021013108E-02); +#179798 = AXIS2_PLACEMENT_3D('',#179799,#179800,#179801); +#179799 = CARTESIAN_POINT('',(106.3821263167,-94.37791899764,1.585)); +#179800 = DIRECTION('',(0.,0.,-1.)); +#179801 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#179802 = ORIENTED_EDGE('',*,*,#179803,.T.); +#179803 = EDGE_CURVE('',#179795,#179804,#179806,.T.); +#179804 = VERTEX_POINT('',#179805); +#179805 = CARTESIAN_POINT('',(106.888001,-93.765976,1.585)); +#179806 = LINE('',#179807,#179808); +#179807 = CARTESIAN_POINT('',(106.329093,-94.324886,1.585)); +#179808 = VECTOR('',#179809,1.); +#179809 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#179810 = ORIENTED_EDGE('',*,*,#179811,.T.); +#179811 = EDGE_CURVE('',#179804,#179812,#179814,.T.); +#179812 = VERTEX_POINT('',#179813); +#179813 = CARTESIAN_POINT('',(106.926173,-93.651463,1.585)); +#179814 = LINE('',#179815,#179816); +#179815 = CARTESIAN_POINT('',(106.888001,-93.765976,1.585)); +#179816 = VECTOR('',#179817,1.); +#179817 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#179818 = ORIENTED_EDGE('',*,*,#179819,.T.); +#179819 = EDGE_CURVE('',#179812,#179820,#179822,.T.); +#179820 = VERTEX_POINT('',#179821); +#179821 = CARTESIAN_POINT('',(106.926173,-93.5861,1.585)); +#179822 = LINE('',#179823,#179824); +#179823 = CARTESIAN_POINT('',(106.926173,-93.651463,1.585)); +#179824 = VECTOR('',#179825,1.); +#179825 = DIRECTION('',(0.,1.,0.)); +#179826 = ORIENTED_EDGE('',*,*,#179827,.T.); +#179827 = EDGE_CURVE('',#179820,#179828,#179830,.T.); +#179828 = VERTEX_POINT('',#179829); +#179829 = CARTESIAN_POINT('',(106.792992,-93.452919,1.585)); +#179830 = CIRCLE('',#179831,0.18686440374); +#179831 = AXIS2_PLACEMENT_3D('',#179832,#179833,#179834); +#179832 = CARTESIAN_POINT('',(106.745456,-93.633636,1.585)); +#179833 = DIRECTION('',(0.,0.,1.)); +#179834 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#179835 = ORIENTED_EDGE('',*,*,#179836,.T.); +#179836 = EDGE_CURVE('',#179828,#179837,#179839,.T.); +#179837 = VERTEX_POINT('',#179838); +#179838 = CARTESIAN_POINT('',(106.590307,-93.452919,1.585)); +#179839 = LINE('',#179840,#179841); +#179840 = CARTESIAN_POINT('',(106.792992,-93.452919,1.585)); +#179841 = VECTOR('',#179842,1.); +#179842 = DIRECTION('',(-1.,0.,0.)); +#179843 = ORIENTED_EDGE('',*,*,#179844,.T.); +#179844 = EDGE_CURVE('',#179837,#179845,#179847,.T.); +#179845 = VERTEX_POINT('',#179846); +#179846 = CARTESIAN_POINT('',(106.521791,-93.487177,1.585)); +#179847 = LINE('',#179848,#179849); +#179848 = CARTESIAN_POINT('',(106.590307,-93.452919,1.585)); +#179849 = VECTOR('',#179850,1.); +#179850 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#179851 = ORIENTED_EDGE('',*,*,#179852,.T.); +#179852 = EDGE_CURVE('',#179845,#179853,#179855,.T.); +#179853 = VERTEX_POINT('',#179854); +#179854 = CARTESIAN_POINT('',(106.471413,-93.535517,1.585)); +#179855 = LINE('',#179856,#179857); +#179856 = CARTESIAN_POINT('',(106.521791,-93.487177,1.585)); +#179857 = VECTOR('',#179858,1.); +#179858 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#179859 = ORIENTED_EDGE('',*,*,#179860,.T.); +#179860 = EDGE_CURVE('',#179853,#179861,#179863,.T.); +#179861 = VERTEX_POINT('',#179862); +#179862 = CARTESIAN_POINT('',(106.376712,-93.420124,1.585)); +#179863 = CIRCLE('',#179864,7.499996838527E-02); +#179864 = AXIS2_PLACEMENT_3D('',#179865,#179866,#179867); +#179865 = CARTESIAN_POINT('',(106.429745,-93.47315697246,1.585)); +#179866 = DIRECTION('',(0.,0.,-1.)); +#179867 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#179868 = ORIENTED_EDGE('',*,*,#179869,.T.); +#179869 = EDGE_CURVE('',#179861,#179719,#179870,.T.); +#179870 = LINE('',#179871,#179872); +#179871 = CARTESIAN_POINT('',(106.376712,-93.420124,1.585)); +#179872 = VECTOR('',#179873,1.); +#179873 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#179874 = PLANE('',#179875); +#179875 = AXIS2_PLACEMENT_3D('',#179876,#179877,#179878); +#179876 = CARTESIAN_POINT('',(0.,0.,1.585)); +#179877 = DIRECTION('',(0.,0.,1.)); +#179878 = DIRECTION('',(1.,0.,-0.)); +#179879 = SHELL_BASED_SURFACE_MODEL('',(#179880)); +#179880 = OPEN_SHELL('',(#179881)); +#179881 = ADVANCED_FACE('',(#179882,#179993),#180045,.T.); +#179882 = FACE_BOUND('',#179883,.F.); +#179883 = EDGE_LOOP('',(#179884,#179895,#179903,#179912,#179920,#179929, + #179937,#179945,#179954,#179962,#179970,#179978,#179987)); +#179884 = ORIENTED_EDGE('',*,*,#179885,.T.); +#179885 = EDGE_CURVE('',#179886,#179888,#179890,.T.); +#179886 = VERTEX_POINT('',#179887); +#179887 = CARTESIAN_POINT('',(133.578805,-93.333287,1.585)); +#179888 = VERTEX_POINT('',#179889); +#179889 = CARTESIAN_POINT('',(133.652364,-93.272919,1.585)); +#179890 = CIRCLE('',#179891,7.500074938989E-02); +#179891 = AXIS2_PLACEMENT_3D('',#179892,#179893,#179894); +#179892 = CARTESIAN_POINT('',(133.65236446611,-93.34791974938,1.585)); +#179893 = DIRECTION('',(0.,0.,-1.)); +#179894 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#179895 = ORIENTED_EDGE('',*,*,#179896,.T.); +#179896 = EDGE_CURVE('',#179888,#179897,#179899,.T.); +#179897 = VERTEX_POINT('',#179898); +#179898 = CARTESIAN_POINT('',(134.047948,-93.27436,1.585)); +#179899 = LINE('',#179900,#179901); +#179900 = CARTESIAN_POINT('',(133.652364,-93.272919,1.585)); +#179901 = VECTOR('',#179902,1.); +#179902 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#179903 = ORIENTED_EDGE('',*,*,#179904,.T.); +#179904 = EDGE_CURVE('',#179897,#179905,#179907,.T.); +#179905 = VERTEX_POINT('',#179906); +#179906 = CARTESIAN_POINT('',(134.297351,-93.523763,1.585)); +#179907 = CIRCLE('',#179908,0.347870264855); +#179908 = AXIS2_PLACEMENT_3D('',#179909,#179910,#179911); +#179909 = CARTESIAN_POINT('',(133.96062026502,-93.61109073497,1.585)); +#179910 = DIRECTION('',(0.,0.,-1.)); +#179911 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#179912 = ORIENTED_EDGE('',*,*,#179913,.T.); +#179913 = EDGE_CURVE('',#179905,#179914,#179916,.T.); +#179914 = VERTEX_POINT('',#179915); +#179915 = CARTESIAN_POINT('',(134.296129,-93.701062,1.585)); +#179916 = LINE('',#179917,#179918); +#179917 = CARTESIAN_POINT('',(134.297351,-93.523763,1.585)); +#179918 = VECTOR('',#179919,1.); +#179919 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#179920 = ORIENTED_EDGE('',*,*,#179921,.T.); +#179921 = EDGE_CURVE('',#179914,#179922,#179924,.T.); +#179922 = VERTEX_POINT('',#179923); +#179923 = CARTESIAN_POINT('',(134.047948,-93.945287,1.585)); +#179924 = CIRCLE('',#179925,0.348632345848); +#179925 = AXIS2_PLACEMENT_3D('',#179926,#179927,#179928); +#179926 = CARTESIAN_POINT('',(133.96017919403,-93.6078834593,1.585)); +#179927 = DIRECTION('',(0.,0.,-1.)); +#179928 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#179929 = ORIENTED_EDGE('',*,*,#179930,.T.); +#179930 = EDGE_CURVE('',#179922,#179931,#179933,.T.); +#179931 = VERTEX_POINT('',#179932); +#179932 = CARTESIAN_POINT('',(134.034431,-93.946618,1.585)); +#179933 = LINE('',#179934,#179935); +#179934 = CARTESIAN_POINT('',(134.047948,-93.945287,1.585)); +#179935 = VECTOR('',#179936,1.); +#179936 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#179937 = ORIENTED_EDGE('',*,*,#179938,.T.); +#179938 = EDGE_CURVE('',#179931,#179939,#179941,.T.); +#179939 = VERTEX_POINT('',#179940); +#179940 = CARTESIAN_POINT('',(134.292445,-94.317723,1.585)); +#179941 = LINE('',#179942,#179943); +#179942 = CARTESIAN_POINT('',(134.034431,-93.946618,1.585)); +#179943 = VECTOR('',#179944,1.); +#179944 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#179945 = ORIENTED_EDGE('',*,*,#179946,.T.); +#179946 = EDGE_CURVE('',#179939,#179947,#179949,.T.); +#179947 = VERTEX_POINT('',#179948); +#179948 = CARTESIAN_POINT('',(134.16235,-94.390929,1.585)); +#179949 = CIRCLE('',#179950,7.500005951702E-02); +#179950 = AXIS2_PLACEMENT_3D('',#179951,#179952,#179953); +#179951 = CARTESIAN_POINT('',(134.22379206294,-94.34791874739,1.585)); +#179952 = DIRECTION('',(0.,0.,-1.)); +#179953 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#179954 = ORIENTED_EDGE('',*,*,#179955,.T.); +#179955 = EDGE_CURVE('',#179947,#179956,#179958,.T.); +#179956 = VERTEX_POINT('',#179957); +#179957 = CARTESIAN_POINT('',(133.85141,-93.946728,1.585)); +#179958 = LINE('',#179959,#179960); +#179959 = CARTESIAN_POINT('',(134.16235,-94.390929,1.585)); +#179960 = VECTOR('',#179961,1.); +#179961 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#179962 = ORIENTED_EDGE('',*,*,#179963,.T.); +#179963 = EDGE_CURVE('',#179956,#179964,#179966,.T.); +#179964 = VERTEX_POINT('',#179965); +#179965 = CARTESIAN_POINT('',(133.727364,-93.946728,1.585)); +#179966 = LINE('',#179967,#179968); +#179967 = CARTESIAN_POINT('',(133.85141,-93.946728,1.585)); +#179968 = VECTOR('',#179969,1.); +#179969 = DIRECTION('',(-1.,0.,0.)); +#179970 = ORIENTED_EDGE('',*,*,#179971,.T.); +#179971 = EDGE_CURVE('',#179964,#179972,#179974,.T.); +#179972 = VERTEX_POINT('',#179973); +#179973 = CARTESIAN_POINT('',(133.725923,-94.362551,1.585)); +#179974 = LINE('',#179975,#179976); +#179975 = CARTESIAN_POINT('',(133.727364,-93.946728,1.585)); +#179976 = VECTOR('',#179977,1.); +#179977 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#179978 = ORIENTED_EDGE('',*,*,#179979,.T.); +#179979 = EDGE_CURVE('',#179972,#179980,#179982,.T.); +#179980 = VERTEX_POINT('',#179981); +#179981 = CARTESIAN_POINT('',(133.577364,-94.347919,1.585)); +#179982 = CIRCLE('',#179983,7.500006711464E-02); +#179983 = AXIS2_PLACEMENT_3D('',#179984,#179985,#179986); +#179984 = CARTESIAN_POINT('',(133.65236406711,-94.34791906711,1.585)); +#179985 = DIRECTION('',(-0.,0.,-1.)); +#179986 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#179987 = ORIENTED_EDGE('',*,*,#179988,.T.); +#179988 = EDGE_CURVE('',#179980,#179886,#179989,.T.); +#179989 = LINE('',#179990,#179991); +#179990 = CARTESIAN_POINT('',(133.577364,-94.347919,1.585)); +#179991 = VECTOR('',#179992,1.); +#179992 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#179993 = FACE_BOUND('',#179994,.F.); +#179994 = EDGE_LOOP('',(#179995,#180006,#180014,#180022,#180030,#180039) + ); +#179995 = ORIENTED_EDGE('',*,*,#179996,.T.); +#179996 = EDGE_CURVE('',#179997,#179999,#180001,.T.); +#179997 = VERTEX_POINT('',#179998); +#179998 = CARTESIAN_POINT('',(134.148792,-93.5561,1.585)); +#179999 = VERTEX_POINT('',#180000); +#180000 = CARTESIAN_POINT('',(134.015611,-93.422919,1.585)); +#180001 = CIRCLE('',#180002,0.18686440374); +#180002 = AXIS2_PLACEMENT_3D('',#180003,#180004,#180005); +#180003 = CARTESIAN_POINT('',(133.968075,-93.603636,1.585)); +#180004 = DIRECTION('',(0.,0.,1.)); +#180005 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#180006 = ORIENTED_EDGE('',*,*,#180007,.T.); +#180007 = EDGE_CURVE('',#179999,#180008,#180010,.T.); +#180008 = VERTEX_POINT('',#180009); +#180009 = CARTESIAN_POINT('',(133.727364,-93.422919,1.585)); +#180010 = LINE('',#180011,#180012); +#180011 = CARTESIAN_POINT('',(134.015611,-93.422919,1.585)); +#180012 = VECTOR('',#180013,1.); +#180013 = DIRECTION('',(-1.,0.,0.)); +#180014 = ORIENTED_EDGE('',*,*,#180015,.T.); +#180015 = EDGE_CURVE('',#180008,#180016,#180018,.T.); +#180016 = VERTEX_POINT('',#180017); +#180017 = CARTESIAN_POINT('',(133.727364,-93.796728,1.585)); +#180018 = LINE('',#180019,#180020); +#180019 = CARTESIAN_POINT('',(133.727364,-93.422919,1.585)); +#180020 = VECTOR('',#180021,1.); +#180021 = DIRECTION('',(0.,-1.,0.)); +#180022 = ORIENTED_EDGE('',*,*,#180023,.T.); +#180023 = EDGE_CURVE('',#180016,#180024,#180026,.T.); +#180024 = VERTEX_POINT('',#180025); +#180025 = CARTESIAN_POINT('',(134.015611,-93.796728,1.585)); +#180026 = LINE('',#180027,#180028); +#180027 = CARTESIAN_POINT('',(133.727364,-93.796728,1.585)); +#180028 = VECTOR('',#180029,1.); +#180029 = DIRECTION('',(1.,0.,0.)); +#180030 = ORIENTED_EDGE('',*,*,#180031,.T.); +#180031 = EDGE_CURVE('',#180024,#180032,#180034,.T.); +#180032 = VERTEX_POINT('',#180033); +#180033 = CARTESIAN_POINT('',(134.148792,-93.663547,1.585)); +#180034 = CIRCLE('',#180035,0.18686440374); +#180035 = AXIS2_PLACEMENT_3D('',#180036,#180037,#180038); +#180036 = CARTESIAN_POINT('',(133.968075,-93.616011,1.585)); +#180037 = DIRECTION('',(0.,0.,1.)); +#180038 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#180039 = ORIENTED_EDGE('',*,*,#180040,.T.); +#180040 = EDGE_CURVE('',#180032,#179997,#180041,.T.); +#180041 = LINE('',#180042,#180043); +#180042 = CARTESIAN_POINT('',(134.148792,-93.663547,1.585)); +#180043 = VECTOR('',#180044,1.); +#180044 = DIRECTION('',(0.,1.,0.)); +#180045 = PLANE('',#180046); +#180046 = AXIS2_PLACEMENT_3D('',#180047,#180048,#180049); +#180047 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180048 = DIRECTION('',(0.,0.,1.)); +#180049 = DIRECTION('',(1.,0.,-0.)); +#180050 = SHELL_BASED_SURFACE_MODEL('',(#180051)); +#180051 = OPEN_SHELL('',(#180052)); +#180052 = ADVANCED_FACE('',(#180053),#180248,.T.); +#180053 = FACE_BOUND('',#180054,.F.); +#180054 = EDGE_LOOP('',(#180055,#180066,#180074,#180083,#180091,#180099, + #180107,#180115,#180124,#180132,#180141,#180149,#180157,#180165, + #180174,#180182,#180191,#180199,#180208,#180216,#180225,#180233, + #180242)); +#180055 = ORIENTED_EDGE('',*,*,#180056,.T.); +#180056 = EDGE_CURVE('',#180057,#180059,#180061,.T.); +#180057 = VERTEX_POINT('',#180058); +#180058 = CARTESIAN_POINT('',(134.580626,-93.32604,1.585)); +#180059 = VERTEX_POINT('',#180060); +#180060 = CARTESIAN_POINT('',(134.652364,-93.272919,1.585)); +#180061 = CIRCLE('',#180062,7.50033610077E-02); +#180062 = AXIS2_PLACEMENT_3D('',#180063,#180064,#180065); +#180063 = CARTESIAN_POINT('',(134.6523662707,-93.34792236097,1.585)); +#180064 = DIRECTION('',(0.,0.,-1.)); +#180065 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#180066 = ORIENTED_EDGE('',*,*,#180067,.T.); +#180067 = EDGE_CURVE('',#180059,#180068,#180070,.T.); +#180068 = VERTEX_POINT('',#180069); +#180069 = CARTESIAN_POINT('',(135.143186,-93.27436,1.585)); +#180070 = LINE('',#180071,#180072); +#180071 = CARTESIAN_POINT('',(134.652364,-93.272919,1.585)); +#180072 = VECTOR('',#180073,1.); +#180073 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#180074 = ORIENTED_EDGE('',*,*,#180075,.T.); +#180075 = EDGE_CURVE('',#180068,#180076,#180078,.T.); +#180076 = VERTEX_POINT('',#180077); +#180077 = CARTESIAN_POINT('',(135.128554,-93.422919,1.585)); +#180078 = CIRCLE('',#180079,7.500006711463E-02); +#180079 = AXIS2_PLACEMENT_3D('',#180080,#180081,#180082); +#180080 = CARTESIAN_POINT('',(135.12855406711,-93.34791893288,1.585)); +#180081 = DIRECTION('',(0.,0.,-1.)); +#180082 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#180083 = ORIENTED_EDGE('',*,*,#180084,.T.); +#180084 = EDGE_CURVE('',#180076,#180085,#180087,.T.); +#180085 = VERTEX_POINT('',#180086); +#180086 = CARTESIAN_POINT('',(134.720238,-93.422919,1.585)); +#180087 = LINE('',#180088,#180089); +#180088 = CARTESIAN_POINT('',(135.128554,-93.422919,1.585)); +#180089 = VECTOR('',#180090,1.); +#180090 = DIRECTION('',(-1.,0.,0.)); +#180091 = ORIENTED_EDGE('',*,*,#180092,.T.); +#180092 = EDGE_CURVE('',#180085,#180093,#180095,.T.); +#180093 = VERTEX_POINT('',#180094); +#180094 = CARTESIAN_POINT('',(134.695419,-93.671109,1.585)); +#180095 = LINE('',#180096,#180097); +#180096 = CARTESIAN_POINT('',(134.720238,-93.422919,1.585)); +#180097 = VECTOR('',#180098,1.); +#180098 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#180099 = ORIENTED_EDGE('',*,*,#180100,.T.); +#180100 = EDGE_CURVE('',#180093,#180101,#180103,.T.); +#180101 = VERTEX_POINT('',#180102); +#180102 = CARTESIAN_POINT('',(134.73297,-93.655312,1.585)); +#180103 = LINE('',#180104,#180105); +#180104 = CARTESIAN_POINT('',(134.695419,-93.671109,1.585)); +#180105 = VECTOR('',#180106,1.); +#180106 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#180107 = ORIENTED_EDGE('',*,*,#180108,.T.); +#180108 = EDGE_CURVE('',#180101,#180109,#180111,.T.); +#180109 = VERTEX_POINT('',#180110); +#180110 = CARTESIAN_POINT('',(135.005506,-93.656534,1.585)); +#180111 = LINE('',#180112,#180113); +#180112 = CARTESIAN_POINT('',(134.73297,-93.655312,1.585)); +#180113 = VECTOR('',#180114,1.); +#180114 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#180115 = ORIENTED_EDGE('',*,*,#180116,.T.); +#180116 = EDGE_CURVE('',#180109,#180117,#180119,.T.); +#180117 = VERTEX_POINT('',#180118); +#180118 = CARTESIAN_POINT('',(135.249732,-93.904715,1.585)); +#180119 = CIRCLE('',#180120,0.348625649748); +#180120 = AXIS2_PLACEMENT_3D('',#180121,#180122,#180123); +#180121 = CARTESIAN_POINT('',(134.91233404586,-93.99247868387,1.585)); +#180122 = DIRECTION('',(0.,0.,-1.)); +#180123 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#180124 = ORIENTED_EDGE('',*,*,#180125,.T.); +#180125 = EDGE_CURVE('',#180117,#180126,#180128,.T.); +#180126 = VERTEX_POINT('',#180127); +#180127 = CARTESIAN_POINT('',(135.24851,-94.177252,1.585)); +#180128 = LINE('',#180129,#180130); +#180129 = CARTESIAN_POINT('',(135.249732,-93.904715,1.585)); +#180130 = VECTOR('',#180131,1.); +#180131 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#180132 = ORIENTED_EDGE('',*,*,#180133,.T.); +#180133 = EDGE_CURVE('',#180126,#180134,#180136,.T.); +#180134 = VERTEX_POINT('',#180135); +#180135 = CARTESIAN_POINT('',(135.000329,-94.421478,1.585)); +#180136 = CIRCLE('',#180137,0.348635327447); +#180137 = AXIS2_PLACEMENT_3D('',#180138,#180139,#180140); +#180138 = CARTESIAN_POINT('',(134.91255748129,-94.08407208415,1.585)); +#180139 = DIRECTION('',(0.,0.,-1.)); +#180140 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#180141 = ORIENTED_EDGE('',*,*,#180142,.T.); +#180142 = EDGE_CURVE('',#180134,#180143,#180145,.T.); +#180143 = VERTEX_POINT('',#180144); +#180144 = CARTESIAN_POINT('',(134.727792,-94.420256,1.585)); +#180145 = LINE('',#180146,#180147); +#180146 = CARTESIAN_POINT('',(135.000329,-94.421478,1.585)); +#180147 = VECTOR('',#180148,1.); +#180148 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#180149 = ORIENTED_EDGE('',*,*,#180150,.T.); +#180150 = EDGE_CURVE('',#180143,#180151,#180153,.T.); +#180151 = VERTEX_POINT('',#180152); +#180152 = CARTESIAN_POINT('',(134.605079,-94.35805,1.585)); +#180153 = LINE('',#180154,#180155); +#180154 = CARTESIAN_POINT('',(134.727792,-94.420256,1.585)); +#180155 = VECTOR('',#180156,1.); +#180156 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#180157 = ORIENTED_EDGE('',*,*,#180158,.T.); +#180158 = EDGE_CURVE('',#180151,#180159,#180161,.T.); +#180159 = VERTEX_POINT('',#180160); +#180160 = CARTESIAN_POINT('',(134.542384,-94.294347,1.585)); +#180161 = LINE('',#180162,#180163); +#180162 = CARTESIAN_POINT('',(134.605079,-94.35805,1.585)); +#180163 = VECTOR('',#180164,1.); +#180164 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#180165 = ORIENTED_EDGE('',*,*,#180166,.T.); +#180166 = EDGE_CURVE('',#180159,#180167,#180169,.T.); +#180167 = VERTEX_POINT('',#180168); +#180168 = CARTESIAN_POINT('',(134.657779,-94.199648,1.585)); +#180169 = CIRCLE('',#180170,7.50001266804E-02); +#180170 = AXIS2_PLACEMENT_3D('',#180171,#180172,#180173); +#180171 = CARTESIAN_POINT('',(134.60474505199,-94.25268024831,1.585)); +#180172 = DIRECTION('',(0.,0.,-1.)); +#180173 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#180174 = ORIENTED_EDGE('',*,*,#180175,.T.); +#180175 = EDGE_CURVE('',#180167,#180176,#180178,.T.); +#180176 = VERTEX_POINT('',#180177); +#180177 = CARTESIAN_POINT('',(134.696791,-94.238661,1.585)); +#180178 = LINE('',#180179,#180180); +#180179 = CARTESIAN_POINT('',(134.657779,-94.199648,1.585)); +#180180 = VECTOR('',#180181,1.); +#180181 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#180182 = ORIENTED_EDGE('',*,*,#180183,.T.); +#180183 = EDGE_CURVE('',#180176,#180184,#180186,.T.); +#180184 = VERTEX_POINT('',#180185); +#180185 = CARTESIAN_POINT('',(135.036507,-94.238661,1.585)); +#180186 = CIRCLE('',#180187,0.305620374329); +#180187 = AXIS2_PLACEMENT_3D('',#180188,#180189,#180190); +#180188 = CARTESIAN_POINT('',(134.866649,-93.98459,1.585)); +#180189 = DIRECTION('',(0.,0.,1.)); +#180190 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#180191 = ORIENTED_EDGE('',*,*,#180192,.T.); +#180192 = EDGE_CURVE('',#180184,#180193,#180195,.T.); +#180193 = VERTEX_POINT('',#180194); +#180194 = CARTESIAN_POINT('',(135.066914,-94.208253,1.585)); +#180195 = LINE('',#180196,#180197); +#180196 = CARTESIAN_POINT('',(135.036507,-94.238661,1.585)); +#180197 = VECTOR('',#180198,1.); +#180198 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#180199 = ORIENTED_EDGE('',*,*,#180200,.T.); +#180200 = EDGE_CURVE('',#180193,#180201,#180203,.T.); +#180201 = VERTEX_POINT('',#180202); +#180202 = CARTESIAN_POINT('',(135.066915,-93.868536,1.585)); +#180203 = CIRCLE('',#180204,0.305616146029); +#180204 = AXIS2_PLACEMENT_3D('',#180205,#180206,#180207); +#180205 = CARTESIAN_POINT('',(134.81284892049,-94.03839375212,1.585)); +#180206 = DIRECTION('',(0.,-0.,1.)); +#180207 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#180208 = ORIENTED_EDGE('',*,*,#180209,.T.); +#180209 = EDGE_CURVE('',#180201,#180210,#180212,.T.); +#180210 = VERTEX_POINT('',#180211); +#180211 = CARTESIAN_POINT('',(135.036508,-93.838129,1.585)); +#180212 = LINE('',#180213,#180214); +#180213 = CARTESIAN_POINT('',(135.066915,-93.868536,1.585)); +#180214 = VECTOR('',#180215,1.); +#180215 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#180216 = ORIENTED_EDGE('',*,*,#180217,.T.); +#180217 = EDGE_CURVE('',#180210,#180218,#180220,.T.); +#180218 = VERTEX_POINT('',#180219); +#180219 = CARTESIAN_POINT('',(134.696791,-93.838129,1.585)); +#180220 = CIRCLE('',#180221,0.305621483548); +#180221 = AXIS2_PLACEMENT_3D('',#180222,#180223,#180224); +#180222 = CARTESIAN_POINT('',(134.8666495,-94.092201,1.585)); +#180223 = DIRECTION('',(0.,0.,1.)); +#180224 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#180225 = ORIENTED_EDGE('',*,*,#180226,.T.); +#180226 = EDGE_CURVE('',#180218,#180227,#180229,.T.); +#180227 = VERTEX_POINT('',#180228); +#180228 = CARTESIAN_POINT('',(134.640001,-93.890306,1.585)); +#180229 = LINE('',#180230,#180231); +#180230 = CARTESIAN_POINT('',(134.696791,-93.838129,1.585)); +#180231 = VECTOR('',#180232,1.); +#180232 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#180233 = ORIENTED_EDGE('',*,*,#180234,.T.); +#180234 = EDGE_CURVE('',#180227,#180235,#180237,.T.); +#180235 = VERTEX_POINT('',#180236); +#180236 = CARTESIAN_POINT('',(134.530095,-93.831349,1.585)); +#180237 = CIRCLE('',#180238,7.500024172472E-02); +#180238 = AXIS2_PLACEMENT_3D('',#180239,#180240,#180241); +#180239 = CARTESIAN_POINT('',(134.60474497002,-93.82410895619,1.585)); +#180240 = DIRECTION('',(-0.,0.,-1.)); +#180241 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#180242 = ORIENTED_EDGE('',*,*,#180243,.T.); +#180243 = EDGE_CURVE('',#180235,#180057,#180244,.T.); +#180244 = LINE('',#180245,#180246); +#180245 = CARTESIAN_POINT('',(134.530095,-93.831349,1.585)); +#180246 = VECTOR('',#180247,1.); +#180247 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#180248 = PLANE('',#180249); +#180249 = AXIS2_PLACEMENT_3D('',#180250,#180251,#180252); +#180250 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180251 = DIRECTION('',(0.,0.,1.)); +#180252 = DIRECTION('',(1.,0.,-0.)); +#180253 = SHELL_BASED_SURFACE_MODEL('',(#180254)); +#180254 = OPEN_SHELL('',(#180255)); +#180255 = ADVANCED_FACE('',(#180256),#180391,.T.); +#180256 = FACE_BOUND('',#180257,.F.); +#180257 = EDGE_LOOP('',(#180258,#180269,#180277,#180285,#180293,#180302, + #180310,#180318,#180327,#180335,#180343,#180352,#180360,#180368, + #180377,#180385)); +#180258 = ORIENTED_EDGE('',*,*,#180259,.T.); +#180259 = EDGE_CURVE('',#180260,#180262,#180264,.T.); +#180260 = VERTEX_POINT('',#180261); +#180261 = CARTESIAN_POINT('',(135.749238,-93.241051,1.585)); +#180262 = VERTEX_POINT('',#180263); +#180263 = CARTESIAN_POINT('',(135.866372,-93.324018,1.585)); +#180264 = CIRCLE('',#180265,7.499955990673E-02); +#180265 = AXIS2_PLACEMENT_3D('',#180266,#180267,#180268); +#180266 = CARTESIAN_POINT('',(135.79522150095,-93.30030006435,1.585)); +#180267 = DIRECTION('',(0.,0.,-1.)); +#180268 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#180269 = ORIENTED_EDGE('',*,*,#180270,.T.); +#180270 = EDGE_CURVE('',#180262,#180271,#180273,.T.); +#180271 = VERTEX_POINT('',#180272); +#180272 = CARTESIAN_POINT('',(135.661183,-93.939585,1.585)); +#180273 = LINE('',#180274,#180275); +#180274 = CARTESIAN_POINT('',(135.866372,-93.324018,1.585)); +#180275 = VECTOR('',#180276,1.); +#180276 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#180277 = ORIENTED_EDGE('',*,*,#180278,.T.); +#180278 = EDGE_CURVE('',#180271,#180279,#180281,.T.); +#180279 = VERTEX_POINT('',#180280); +#180280 = CARTESIAN_POINT('',(135.958316,-93.939585,1.585)); +#180281 = LINE('',#180282,#180283); +#180282 = CARTESIAN_POINT('',(135.661183,-93.939585,1.585)); +#180283 = VECTOR('',#180284,1.); +#180284 = DIRECTION('',(1.,0.,0.)); +#180285 = ORIENTED_EDGE('',*,*,#180286,.T.); +#180286 = EDGE_CURVE('',#180279,#180287,#180289,.T.); +#180287 = VERTEX_POINT('',#180288); +#180288 = CARTESIAN_POINT('',(135.959757,-93.66662,1.585)); +#180289 = LINE('',#180290,#180291); +#180290 = CARTESIAN_POINT('',(135.958316,-93.939585,1.585)); +#180291 = VECTOR('',#180292,1.); +#180292 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#180293 = ORIENTED_EDGE('',*,*,#180294,.T.); +#180294 = EDGE_CURVE('',#180287,#180295,#180297,.T.); +#180295 = VERTEX_POINT('',#180296); +#180296 = CARTESIAN_POINT('',(136.108316,-93.681252,1.585)); +#180297 = CIRCLE('',#180298,7.500006711465E-02); +#180298 = AXIS2_PLACEMENT_3D('',#180299,#180300,#180301); +#180299 = CARTESIAN_POINT('',(136.03331593288,-93.68125193288,1.585)); +#180300 = DIRECTION('',(0.,0.,-1.)); +#180301 = DIRECTION('',(-0.980784894138,0.195092263892,0.)); +#180302 = ORIENTED_EDGE('',*,*,#180303,.T.); +#180303 = EDGE_CURVE('',#180295,#180304,#180306,.T.); +#180304 = VERTEX_POINT('',#180305); +#180305 = CARTESIAN_POINT('',(136.108316,-93.939585,1.585)); +#180306 = LINE('',#180307,#180308); +#180307 = CARTESIAN_POINT('',(136.108316,-93.681252,1.585)); +#180308 = VECTOR('',#180309,1.); +#180309 = DIRECTION('',(0.,-1.,0.)); +#180310 = ORIENTED_EDGE('',*,*,#180311,.T.); +#180311 = EDGE_CURVE('',#180304,#180312,#180314,.T.); +#180312 = VERTEX_POINT('',#180313); +#180313 = CARTESIAN_POINT('',(136.190805,-93.941026,1.585)); +#180314 = LINE('',#180315,#180316); +#180315 = CARTESIAN_POINT('',(136.108316,-93.939585,1.585)); +#180316 = VECTOR('',#180317,1.); +#180317 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#180318 = ORIENTED_EDGE('',*,*,#180319,.T.); +#180319 = EDGE_CURVE('',#180312,#180320,#180322,.T.); +#180320 = VERTEX_POINT('',#180321); +#180321 = CARTESIAN_POINT('',(136.176173,-94.089585,1.585)); +#180322 = CIRCLE('',#180323,7.500006711464E-02); +#180323 = AXIS2_PLACEMENT_3D('',#180324,#180325,#180326); +#180324 = CARTESIAN_POINT('',(136.17617306711,-94.01458493288,1.585)); +#180325 = DIRECTION('',(0.,0.,-1.)); +#180326 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#180327 = ORIENTED_EDGE('',*,*,#180328,.T.); +#180328 = EDGE_CURVE('',#180320,#180329,#180331,.T.); +#180329 = VERTEX_POINT('',#180330); +#180330 = CARTESIAN_POINT('',(136.108316,-94.089585,1.585)); +#180331 = LINE('',#180332,#180333); +#180332 = CARTESIAN_POINT('',(136.176173,-94.089585,1.585)); +#180333 = VECTOR('',#180334,1.); +#180334 = DIRECTION('',(-1.,0.,0.)); +#180335 = ORIENTED_EDGE('',*,*,#180336,.T.); +#180336 = EDGE_CURVE('',#180329,#180337,#180339,.T.); +#180337 = VERTEX_POINT('',#180338); +#180338 = CARTESIAN_POINT('',(136.106875,-94.362551,1.585)); +#180339 = LINE('',#180340,#180341); +#180340 = CARTESIAN_POINT('',(136.108316,-94.089585,1.585)); +#180341 = VECTOR('',#180342,1.); +#180342 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#180343 = ORIENTED_EDGE('',*,*,#180344,.T.); +#180344 = EDGE_CURVE('',#180337,#180345,#180347,.T.); +#180345 = VERTEX_POINT('',#180346); +#180346 = CARTESIAN_POINT('',(135.958316,-94.347919,1.585)); +#180347 = CIRCLE('',#180348,7.500006711464E-02); +#180348 = AXIS2_PLACEMENT_3D('',#180349,#180350,#180351); +#180349 = CARTESIAN_POINT('',(136.03331606711,-94.34791906711,1.585)); +#180350 = DIRECTION('',(-0.,0.,-1.)); +#180351 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#180352 = ORIENTED_EDGE('',*,*,#180353,.T.); +#180353 = EDGE_CURVE('',#180345,#180354,#180356,.T.); +#180354 = VERTEX_POINT('',#180355); +#180355 = CARTESIAN_POINT('',(135.958316,-94.089585,1.585)); +#180356 = LINE('',#180357,#180358); +#180357 = CARTESIAN_POINT('',(135.958316,-94.347919,1.585)); +#180358 = VECTOR('',#180359,1.); +#180359 = DIRECTION('',(0.,1.,0.)); +#180360 = ORIENTED_EDGE('',*,*,#180361,.T.); +#180361 = EDGE_CURVE('',#180354,#180362,#180364,.T.); +#180362 = VERTEX_POINT('',#180363); +#180363 = CARTESIAN_POINT('',(135.542494,-94.088144,1.585)); +#180364 = LINE('',#180365,#180366); +#180365 = CARTESIAN_POINT('',(135.958316,-94.089585,1.585)); +#180366 = VECTOR('',#180367,1.); +#180367 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#180368 = ORIENTED_EDGE('',*,*,#180369,.T.); +#180369 = EDGE_CURVE('',#180362,#180370,#180372,.T.); +#180370 = VERTEX_POINT('',#180371); +#180371 = CARTESIAN_POINT('',(135.485975,-93.990868,1.585)); +#180372 = CIRCLE('',#180373,7.499997045039E-02); +#180373 = AXIS2_PLACEMENT_3D('',#180374,#180375,#180376); +#180374 = CARTESIAN_POINT('',(135.55712617257,-94.01458521335,1.585)); +#180375 = DIRECTION('',(0.,0.,-1.)); +#180376 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#180377 = ORIENTED_EDGE('',*,*,#180378,.T.); +#180378 = EDGE_CURVE('',#180370,#180379,#180381,.T.); +#180379 = VERTEX_POINT('',#180380); +#180380 = CARTESIAN_POINT('',(135.730064,-93.263158,1.585)); +#180381 = LINE('',#180382,#180383); +#180382 = CARTESIAN_POINT('',(135.485975,-93.990868,1.585)); +#180383 = VECTOR('',#180384,1.); +#180384 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#180385 = ORIENTED_EDGE('',*,*,#180386,.T.); +#180386 = EDGE_CURVE('',#180379,#180260,#180387,.T.); +#180387 = LINE('',#180388,#180389); +#180388 = CARTESIAN_POINT('',(135.730064,-93.263158,1.585)); +#180389 = VECTOR('',#180390,1.); +#180390 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#180391 = PLANE('',#180392); +#180392 = AXIS2_PLACEMENT_3D('',#180393,#180394,#180395); +#180393 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180394 = DIRECTION('',(0.,0.,1.)); +#180395 = DIRECTION('',(1.,0.,-0.)); +#180396 = SHELL_BASED_SURFACE_MODEL('',(#180397)); +#180397 = OPEN_SHELL('',(#180398)); +#180398 = ADVANCED_FACE('',(#180399,#180551),#180619,.T.); +#180399 = FACE_BOUND('',#180400,.F.); +#180400 = EDGE_LOOP('',(#180401,#180412,#180420,#180428,#180436,#180445, + #180453,#180461,#180470,#180478,#180487,#180495,#180503,#180511, + #180520,#180528,#180537,#180545)); +#180401 = ORIENTED_EDGE('',*,*,#180402,.T.); +#180402 = EDGE_CURVE('',#180403,#180405,#180407,.T.); +#180403 = VERTEX_POINT('',#180404); +#180404 = CARTESIAN_POINT('',(91.42932,-93.63091,1.585)); +#180405 = VERTEX_POINT('',#180406); +#180406 = CARTESIAN_POINT('',(91.425792,-93.544046,1.585)); +#180407 = CIRCLE('',#180408,7.226649079678E-02); +#180408 = AXIS2_PLACEMENT_3D('',#180409,#180410,#180411); +#180409 = CARTESIAN_POINT('',(91.485240541535,-93.58513512996,1.585)); +#180410 = DIRECTION('',(0.,0.,-1.)); +#180411 = DIRECTION('',(-0.773810114734,-0.633417639741,-0.)); +#180412 = ORIENTED_EDGE('',*,*,#180413,.T.); +#180413 = EDGE_CURVE('',#180405,#180414,#180416,.T.); +#180414 = VERTEX_POINT('',#180415); +#180415 = CARTESIAN_POINT('',(91.446484,-93.523354,1.585)); +#180416 = LINE('',#180417,#180418); +#180417 = CARTESIAN_POINT('',(91.425792,-93.544046,1.585)); +#180418 = VECTOR('',#180419,1.); +#180419 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#180420 = ORIENTED_EDGE('',*,*,#180421,.T.); +#180421 = EDGE_CURVE('',#180414,#180422,#180424,.T.); +#180422 = VERTEX_POINT('',#180423); +#180423 = CARTESIAN_POINT('',(91.488152,-93.510714,1.585)); +#180424 = LINE('',#180425,#180426); +#180425 = CARTESIAN_POINT('',(91.446484,-93.523354,1.585)); +#180426 = VECTOR('',#180427,1.); +#180427 = DIRECTION('',(0.956939376321,0.29028783999,0.)); +#180428 = ORIENTED_EDGE('',*,*,#180429,.T.); +#180429 = EDGE_CURVE('',#180422,#180430,#180432,.T.); +#180430 = VERTEX_POINT('',#180431); +#180431 = CARTESIAN_POINT('',(92.312308,-93.512155,1.585)); +#180432 = LINE('',#180433,#180434); +#180433 = CARTESIAN_POINT('',(91.488152,-93.510714,1.585)); +#180434 = VECTOR('',#180435,1.); +#180435 = DIRECTION('',(0.999998471455,-1.748452716939E-03,0.)); +#180436 = ORIENTED_EDGE('',*,*,#180437,.T.); +#180437 = EDGE_CURVE('',#180430,#180438,#180440,.T.); +#180438 = VERTEX_POINT('',#180439); +#180439 = CARTESIAN_POINT('',(92.561711,-93.761558,1.585)); +#180440 = CIRCLE('',#180441,0.347870264855); +#180441 = AXIS2_PLACEMENT_3D('',#180442,#180443,#180444); +#180442 = CARTESIAN_POINT('',(92.224980265028,-93.84888573497,1.585)); +#180443 = DIRECTION('',(0.,0.,-1.)); +#180444 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#180445 = ORIENTED_EDGE('',*,*,#180446,.T.); +#180446 = EDGE_CURVE('',#180438,#180447,#180449,.T.); +#180447 = VERTEX_POINT('',#180448); +#180448 = CARTESIAN_POINT('',(92.560489,-93.938857,1.585)); +#180449 = LINE('',#180450,#180451); +#180450 = CARTESIAN_POINT('',(92.561711,-93.761558,1.585)); +#180451 = VECTOR('',#180452,1.); +#180452 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#180453 = ORIENTED_EDGE('',*,*,#180454,.T.); +#180454 = EDGE_CURVE('',#180447,#180455,#180457,.T.); +#180455 = VERTEX_POINT('',#180456); +#180456 = CARTESIAN_POINT('',(92.499783,-94.060269,1.585)); +#180457 = LINE('',#180458,#180459); +#180458 = CARTESIAN_POINT('',(92.560489,-93.938857,1.585)); +#180459 = VECTOR('',#180460,1.); +#180460 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#180461 = ORIENTED_EDGE('',*,*,#180462,.T.); +#180462 = EDGE_CURVE('',#180455,#180463,#180465,.T.); +#180463 = VERTEX_POINT('',#180464); +#180464 = CARTESIAN_POINT('',(92.373451,-93.980744,1.585)); +#180465 = CIRCLE('',#180466,7.500029440361E-02); +#180466 = AXIS2_PLACEMENT_3D('',#180467,#180468,#180469); +#180467 = CARTESIAN_POINT('',(92.440533351324,-94.01428505397,1.585)); +#180468 = DIRECTION('',(-0.,0.,-1.)); +#180469 = DIRECTION('',(0.789992214662,-0.613116873665,-0.)); +#180470 = ORIENTED_EDGE('',*,*,#180471,.T.); +#180471 = EDGE_CURVE('',#180463,#180472,#180474,.T.); +#180472 = VERTEX_POINT('',#180473); +#180473 = CARTESIAN_POINT('',(92.413152,-93.901342,1.585)); +#180474 = LINE('',#180475,#180476); +#180475 = CARTESIAN_POINT('',(92.373451,-93.980744,1.585)); +#180476 = VECTOR('',#180477,1.); +#180477 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#180478 = ORIENTED_EDGE('',*,*,#180479,.T.); +#180479 = EDGE_CURVE('',#180472,#180480,#180482,.T.); +#180480 = VERTEX_POINT('',#180481); +#180481 = CARTESIAN_POINT('',(92.348487,-93.694972,1.585)); +#180482 = CIRCLE('',#180483,0.197624884179); +#180483 = AXIS2_PLACEMENT_3D('',#180484,#180485,#180486); +#180484 = CARTESIAN_POINT('',(92.222969507655,-93.8476185,1.585)); +#180485 = DIRECTION('',(0.,-0.,1.)); +#180486 = DIRECTION('',(0.962340816213,-0.271845826618,-0.)); +#180487 = ORIENTED_EDGE('',*,*,#180488,.T.); +#180488 = EDGE_CURVE('',#180480,#180489,#180491,.T.); +#180489 = VERTEX_POINT('',#180490); +#180490 = CARTESIAN_POINT('',(92.279971,-93.660714,1.585)); +#180491 = LINE('',#180492,#180493); +#180492 = CARTESIAN_POINT('',(92.348487,-93.694972,1.585)); +#180493 = VECTOR('',#180494,1.); +#180494 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#180495 = ORIENTED_EDGE('',*,*,#180496,.T.); +#180496 = EDGE_CURVE('',#180489,#180497,#180499,.T.); +#180497 = VERTEX_POINT('',#180498); +#180498 = CARTESIAN_POINT('',(92.227156,-93.661142,1.585)); +#180499 = LINE('',#180500,#180501); +#180500 = CARTESIAN_POINT('',(92.279971,-93.660714,1.585)); +#180501 = VECTOR('',#180502,1.); +#180502 = DIRECTION('',(-0.999967166167,-8.103492324507E-03,0.)); +#180503 = ORIENTED_EDGE('',*,*,#180504,.T.); +#180504 = EDGE_CURVE('',#180497,#180505,#180507,.T.); +#180505 = VERTEX_POINT('',#180506); +#180506 = CARTESIAN_POINT('',(92.227156,-93.891238,1.585)); +#180507 = LINE('',#180508,#180509); +#180508 = CARTESIAN_POINT('',(92.227156,-93.661142,1.585)); +#180509 = VECTOR('',#180510,1.); +#180510 = DIRECTION('',(0.,-1.,0.)); +#180511 = ORIENTED_EDGE('',*,*,#180512,.T.); +#180512 = EDGE_CURVE('',#180505,#180513,#180515,.T.); +#180513 = VERTEX_POINT('',#180514); +#180514 = CARTESIAN_POINT('',(91.978974,-94.135463,1.585)); +#180515 = CIRCLE('',#180516,0.348632713765); +#180516 = AXIS2_PLACEMENT_3D('',#180517,#180518,#180519); +#180517 = CARTESIAN_POINT('',(91.891205973942,-93.79805887627,1.585)); +#180518 = DIRECTION('',(0.,0.,-1.)); +#180519 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#180520 = ORIENTED_EDGE('',*,*,#180521,.T.); +#180521 = EDGE_CURVE('',#180513,#180522,#180524,.T.); +#180522 = VERTEX_POINT('',#180523); +#180523 = CARTESIAN_POINT('',(91.658818,-94.134241,1.585)); +#180524 = LINE('',#180525,#180526); +#180525 = CARTESIAN_POINT('',(91.978974,-94.135463,1.585)); +#180526 = VECTOR('',#180527,1.); +#180527 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#180528 = ORIENTED_EDGE('',*,*,#180529,.T.); +#180529 = EDGE_CURVE('',#180522,#180530,#180532,.T.); +#180530 = VERTEX_POINT('',#180531); +#180531 = CARTESIAN_POINT('',(91.414593,-93.88606,1.585)); +#180532 = CIRCLE('',#180533,0.348628078749); +#180533 = AXIS2_PLACEMENT_3D('',#180534,#180535,#180536); +#180534 = CARTESIAN_POINT('',(91.751993030202,-93.79829464857,1.585)); +#180535 = DIRECTION('',(0.,0.,-1.)); +#180536 = DIRECTION('',(-0.267261978831,-0.963623907275,-0.)); +#180537 = ORIENTED_EDGE('',*,*,#180538,.T.); +#180538 = EDGE_CURVE('',#180530,#180539,#180541,.T.); +#180539 = VERTEX_POINT('',#180540); +#180540 = CARTESIAN_POINT('',(91.415815,-93.661143,1.585)); +#180541 = LINE('',#180542,#180543); +#180542 = CARTESIAN_POINT('',(91.414593,-93.88606,1.585)); +#180543 = VECTOR('',#180544,1.); +#180544 = DIRECTION('',(5.433035139391E-03,0.999985240956,0.)); +#180545 = ORIENTED_EDGE('',*,*,#180546,.T.); +#180546 = EDGE_CURVE('',#180539,#180403,#180547,.T.); +#180547 = LINE('',#180548,#180549); +#180548 = CARTESIAN_POINT('',(91.415815,-93.661143,1.585)); +#180549 = VECTOR('',#180550,1.); +#180550 = DIRECTION('',(0.407855431141,0.913046519784,0.)); +#180551 = FACE_BOUND('',#180552,.F.); +#180552 = EDGE_LOOP('',(#180553,#180563,#180571,#180579,#180587,#180596, + #180604,#180613)); +#180553 = ORIENTED_EDGE('',*,*,#180554,.T.); +#180554 = EDGE_CURVE('',#180555,#180557,#180559,.T.); +#180555 = VERTEX_POINT('',#180556); +#180556 = CARTESIAN_POINT('',(92.079819,-93.698657,1.585)); +#180557 = VERTEX_POINT('',#180558); +#180558 = CARTESIAN_POINT('',(92.060847,-93.660714,1.585)); +#180559 = LINE('',#180560,#180561); +#180560 = CARTESIAN_POINT('',(92.079819,-93.698657,1.585)); +#180561 = VECTOR('',#180562,1.); +#180562 = DIRECTION('',(-0.447223024592,0.894422476392,0.)); +#180563 = ORIENTED_EDGE('',*,*,#180564,.T.); +#180564 = EDGE_CURVE('',#180557,#180565,#180567,.T.); +#180565 = VERTEX_POINT('',#180566); +#180566 = CARTESIAN_POINT('',(91.582124,-93.660714,1.585)); +#180567 = LINE('',#180568,#180569); +#180568 = CARTESIAN_POINT('',(92.060847,-93.660714,1.585)); +#180569 = VECTOR('',#180570,1.); +#180570 = DIRECTION('',(-1.,0.,0.)); +#180571 = ORIENTED_EDGE('',*,*,#180572,.T.); +#180572 = EDGE_CURVE('',#180565,#180573,#180575,.T.); +#180573 = VERTEX_POINT('',#180574); +#180574 = CARTESIAN_POINT('',(91.563152,-93.698657,1.585)); +#180575 = LINE('',#180576,#180577); +#180576 = CARTESIAN_POINT('',(91.582124,-93.660714,1.585)); +#180577 = VECTOR('',#180578,1.); +#180578 = DIRECTION('',(-0.447223024592,-0.894422476392,0.)); +#180579 = ORIENTED_EDGE('',*,*,#180580,.T.); +#180580 = EDGE_CURVE('',#180573,#180581,#180583,.T.); +#180581 = VERTEX_POINT('',#180582); +#180582 = CARTESIAN_POINT('',(91.563152,-93.853723,1.585)); +#180583 = LINE('',#180584,#180585); +#180584 = CARTESIAN_POINT('',(91.563152,-93.698657,1.585)); +#180585 = VECTOR('',#180586,1.); +#180586 = DIRECTION('',(0.,-1.,0.)); +#180587 = ORIENTED_EDGE('',*,*,#180588,.T.); +#180588 = EDGE_CURVE('',#180581,#180589,#180591,.T.); +#180589 = VERTEX_POINT('',#180590); +#180590 = CARTESIAN_POINT('',(91.696333,-93.986904,1.585)); +#180591 = CIRCLE('',#180592,0.18686440374); +#180592 = AXIS2_PLACEMENT_3D('',#180593,#180594,#180595); +#180593 = CARTESIAN_POINT('',(91.743869,-93.806187,1.585)); +#180594 = DIRECTION('',(0.,0.,1.)); +#180595 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#180596 = ORIENTED_EDGE('',*,*,#180597,.T.); +#180597 = EDGE_CURVE('',#180589,#180598,#180600,.T.); +#180598 = VERTEX_POINT('',#180599); +#180599 = CARTESIAN_POINT('',(91.946637,-93.986904,1.585)); +#180600 = LINE('',#180601,#180602); +#180601 = CARTESIAN_POINT('',(91.696333,-93.986904,1.585)); +#180602 = VECTOR('',#180603,1.); +#180603 = DIRECTION('',(1.,0.,0.)); +#180604 = ORIENTED_EDGE('',*,*,#180605,.T.); +#180605 = EDGE_CURVE('',#180598,#180606,#180608,.T.); +#180606 = VERTEX_POINT('',#180607); +#180607 = CARTESIAN_POINT('',(92.079819,-93.853723,1.585)); +#180608 = CIRCLE('',#180609,0.186872595955); +#180609 = AXIS2_PLACEMENT_3D('',#180610,#180611,#180612); +#180610 = CARTESIAN_POINT('',(91.89909536766,-93.80618001068,1.585)); +#180611 = DIRECTION('',(0.,0.,1.)); +#180612 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#180613 = ORIENTED_EDGE('',*,*,#180614,.T.); +#180614 = EDGE_CURVE('',#180606,#180555,#180615,.T.); +#180615 = LINE('',#180616,#180617); +#180616 = CARTESIAN_POINT('',(92.079819,-93.853723,1.585)); +#180617 = VECTOR('',#180618,1.); +#180618 = DIRECTION('',(0.,1.,0.)); +#180619 = PLANE('',#180620); +#180620 = AXIS2_PLACEMENT_3D('',#180621,#180622,#180623); +#180621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180622 = DIRECTION('',(0.,0.,1.)); +#180623 = DIRECTION('',(1.,0.,-0.)); +#180624 = SHELL_BASED_SURFACE_MODEL('',(#180625)); +#180625 = OPEN_SHELL('',(#180626)); +#180626 = ADVANCED_FACE('',(#180627,#180697),#180731,.T.); +#180627 = FACE_BOUND('',#180628,.F.); +#180628 = EDGE_LOOP('',(#180629,#180640,#180648,#180657,#180665,#180674, + #180682,#180691)); +#180629 = ORIENTED_EDGE('',*,*,#180630,.T.); +#180630 = EDGE_CURVE('',#180631,#180633,#180635,.T.); +#180631 = VERTEX_POINT('',#180632); +#180632 = CARTESIAN_POINT('',(173.07165,-75.8231,1.585)); +#180633 = VERTEX_POINT('',#180634); +#180634 = CARTESIAN_POINT('',(173.13165,-75.7631,1.585)); +#180635 = CIRCLE('',#180636,5.999932016265E-02); +#180636 = AXIS2_PLACEMENT_3D('',#180637,#180638,#180639); +#180637 = CARTESIAN_POINT('',(173.13164932015,-75.82309932015,1.585)); +#180638 = DIRECTION('',(0.,0.,-1.)); +#180639 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#180640 = ORIENTED_EDGE('',*,*,#180641,.T.); +#180641 = EDGE_CURVE('',#180633,#180642,#180644,.T.); +#180642 = VERTEX_POINT('',#180643); +#180643 = CARTESIAN_POINT('',(175.25165,-75.7631,1.585)); +#180644 = LINE('',#180645,#180646); +#180645 = CARTESIAN_POINT('',(173.13165,-75.7631,1.585)); +#180646 = VECTOR('',#180647,1.); +#180647 = DIRECTION('',(1.,0.,0.)); +#180648 = ORIENTED_EDGE('',*,*,#180649,.T.); +#180649 = EDGE_CURVE('',#180642,#180650,#180652,.T.); +#180650 = VERTEX_POINT('',#180651); +#180651 = CARTESIAN_POINT('',(175.31165,-75.8231,1.585)); +#180652 = CIRCLE('',#180653,5.999932016264E-02); +#180653 = AXIS2_PLACEMENT_3D('',#180654,#180655,#180656); +#180654 = CARTESIAN_POINT('',(175.25165067984,-75.82309932015,1.585)); +#180655 = DIRECTION('',(0.,0.,-1.)); +#180656 = DIRECTION('',(-1.133081470032E-05,0.999999999936,0.)); +#180657 = ORIENTED_EDGE('',*,*,#180658,.T.); +#180658 = EDGE_CURVE('',#180650,#180659,#180661,.T.); +#180659 = VERTEX_POINT('',#180660); +#180660 = CARTESIAN_POINT('',(175.31165,-93.8831,1.585)); +#180661 = LINE('',#180662,#180663); +#180662 = CARTESIAN_POINT('',(175.31165,-75.8231,1.585)); +#180663 = VECTOR('',#180664,1.); +#180664 = DIRECTION('',(0.,-1.,0.)); +#180665 = ORIENTED_EDGE('',*,*,#180666,.T.); +#180666 = EDGE_CURVE('',#180659,#180667,#180669,.T.); +#180667 = VERTEX_POINT('',#180668); +#180668 = CARTESIAN_POINT('',(175.25165,-93.9431,1.585)); +#180669 = CIRCLE('',#180670,5.999932016256E-02); +#180670 = AXIS2_PLACEMENT_3D('',#180671,#180672,#180673); +#180671 = CARTESIAN_POINT('',(175.25165067984,-93.88310067984,1.585)); +#180672 = DIRECTION('',(0.,0.,-1.)); +#180673 = DIRECTION('',(0.999999999936,1.133081659513E-05,0.)); +#180674 = ORIENTED_EDGE('',*,*,#180675,.T.); +#180675 = EDGE_CURVE('',#180667,#180676,#180678,.T.); +#180676 = VERTEX_POINT('',#180677); +#180677 = CARTESIAN_POINT('',(173.13165,-93.9431,1.585)); +#180678 = LINE('',#180679,#180680); +#180679 = CARTESIAN_POINT('',(175.25165,-93.9431,1.585)); +#180680 = VECTOR('',#180681,1.); +#180681 = DIRECTION('',(-1.,0.,0.)); +#180682 = ORIENTED_EDGE('',*,*,#180683,.T.); +#180683 = EDGE_CURVE('',#180676,#180684,#180686,.T.); +#180684 = VERTEX_POINT('',#180685); +#180685 = CARTESIAN_POINT('',(173.07165,-93.8831,1.585)); +#180686 = CIRCLE('',#180687,5.999932016256E-02); +#180687 = AXIS2_PLACEMENT_3D('',#180688,#180689,#180690); +#180688 = CARTESIAN_POINT('',(173.13164932015,-93.88310067984,1.585)); +#180689 = DIRECTION('',(0.,0.,-1.)); +#180690 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#180691 = ORIENTED_EDGE('',*,*,#180692,.T.); +#180692 = EDGE_CURVE('',#180684,#180631,#180693,.T.); +#180693 = LINE('',#180694,#180695); +#180694 = CARTESIAN_POINT('',(173.07165,-93.8831,1.585)); +#180695 = VECTOR('',#180696,1.); +#180696 = DIRECTION('',(0.,1.,0.)); +#180697 = FACE_BOUND('',#180698,.F.); +#180698 = EDGE_LOOP('',(#180699,#180709,#180717,#180725)); +#180699 = ORIENTED_EDGE('',*,*,#180700,.T.); +#180700 = EDGE_CURVE('',#180701,#180703,#180705,.T.); +#180701 = VERTEX_POINT('',#180702); +#180702 = CARTESIAN_POINT('',(175.19165,-93.8231,1.585)); +#180703 = VERTEX_POINT('',#180704); +#180704 = CARTESIAN_POINT('',(175.19165,-75.8831,1.585)); +#180705 = LINE('',#180706,#180707); +#180706 = CARTESIAN_POINT('',(175.19165,-93.8231,1.585)); +#180707 = VECTOR('',#180708,1.); +#180708 = DIRECTION('',(0.,1.,0.)); +#180709 = ORIENTED_EDGE('',*,*,#180710,.T.); +#180710 = EDGE_CURVE('',#180703,#180711,#180713,.T.); +#180711 = VERTEX_POINT('',#180712); +#180712 = CARTESIAN_POINT('',(173.19165,-75.8831,1.585)); +#180713 = LINE('',#180714,#180715); +#180714 = CARTESIAN_POINT('',(175.19165,-75.8831,1.585)); +#180715 = VECTOR('',#180716,1.); +#180716 = DIRECTION('',(-1.,0.,0.)); +#180717 = ORIENTED_EDGE('',*,*,#180718,.T.); +#180718 = EDGE_CURVE('',#180711,#180719,#180721,.T.); +#180719 = VERTEX_POINT('',#180720); +#180720 = CARTESIAN_POINT('',(173.19165,-93.8231,1.585)); +#180721 = LINE('',#180722,#180723); +#180722 = CARTESIAN_POINT('',(173.19165,-75.8831,1.585)); +#180723 = VECTOR('',#180724,1.); +#180724 = DIRECTION('',(0.,-1.,0.)); +#180725 = ORIENTED_EDGE('',*,*,#180726,.T.); +#180726 = EDGE_CURVE('',#180719,#180701,#180727,.T.); +#180727 = LINE('',#180728,#180729); +#180728 = CARTESIAN_POINT('',(173.19165,-93.8231,1.585)); +#180729 = VECTOR('',#180730,1.); +#180730 = DIRECTION('',(1.,0.,0.)); +#180731 = PLANE('',#180732); +#180732 = AXIS2_PLACEMENT_3D('',#180733,#180734,#180735); +#180733 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180734 = DIRECTION('',(0.,0.,1.)); +#180735 = DIRECTION('',(1.,0.,-0.)); +#180736 = SHELL_BASED_SURFACE_MODEL('',(#180737)); +#180737 = OPEN_SHELL('',(#180738)); +#180738 = ADVANCED_FACE('',(#180739,#180809),#180843,.T.); +#180739 = FACE_BOUND('',#180740,.F.); +#180740 = EDGE_LOOP('',(#180741,#180752,#180760,#180769,#180777,#180786, + #180794,#180803)); +#180741 = ORIENTED_EDGE('',*,*,#180742,.T.); +#180742 = EDGE_CURVE('',#180743,#180745,#180747,.T.); +#180743 = VERTEX_POINT('',#180744); +#180744 = CARTESIAN_POINT('',(195.42165,-75.8231,1.585)); +#180745 = VERTEX_POINT('',#180746); +#180746 = CARTESIAN_POINT('',(195.48165,-75.7631,1.585)); +#180747 = CIRCLE('',#180748,5.999932016265E-02); +#180748 = AXIS2_PLACEMENT_3D('',#180749,#180750,#180751); +#180749 = CARTESIAN_POINT('',(195.48164932015,-75.82309932015,1.585)); +#180750 = DIRECTION('',(0.,0.,-1.)); +#180751 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#180752 = ORIENTED_EDGE('',*,*,#180753,.T.); +#180753 = EDGE_CURVE('',#180745,#180754,#180756,.T.); +#180754 = VERTEX_POINT('',#180755); +#180755 = CARTESIAN_POINT('',(197.60165,-75.7631,1.585)); +#180756 = LINE('',#180757,#180758); +#180757 = CARTESIAN_POINT('',(195.48165,-75.7631,1.585)); +#180758 = VECTOR('',#180759,1.); +#180759 = DIRECTION('',(1.,0.,0.)); +#180760 = ORIENTED_EDGE('',*,*,#180761,.T.); +#180761 = EDGE_CURVE('',#180754,#180762,#180764,.T.); +#180762 = VERTEX_POINT('',#180763); +#180763 = CARTESIAN_POINT('',(197.66165,-75.8231,1.585)); +#180764 = CIRCLE('',#180765,5.999932016264E-02); +#180765 = AXIS2_PLACEMENT_3D('',#180766,#180767,#180768); +#180766 = CARTESIAN_POINT('',(197.60165067984,-75.82309932015,1.585)); +#180767 = DIRECTION('',(0.,0.,-1.)); +#180768 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#180769 = ORIENTED_EDGE('',*,*,#180770,.T.); +#180770 = EDGE_CURVE('',#180762,#180771,#180773,.T.); +#180771 = VERTEX_POINT('',#180772); +#180772 = CARTESIAN_POINT('',(197.66165,-93.8831,1.585)); +#180773 = LINE('',#180774,#180775); +#180774 = CARTESIAN_POINT('',(197.66165,-75.8231,1.585)); +#180775 = VECTOR('',#180776,1.); +#180776 = DIRECTION('',(0.,-1.,0.)); +#180777 = ORIENTED_EDGE('',*,*,#180778,.T.); +#180778 = EDGE_CURVE('',#180771,#180779,#180781,.T.); +#180779 = VERTEX_POINT('',#180780); +#180780 = CARTESIAN_POINT('',(197.60165,-93.9431,1.585)); +#180781 = CIRCLE('',#180782,5.999932016265E-02); +#180782 = AXIS2_PLACEMENT_3D('',#180783,#180784,#180785); +#180783 = CARTESIAN_POINT('',(197.60165067984,-93.88310067984,1.585)); +#180784 = DIRECTION('',(0.,0.,-1.)); +#180785 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#180786 = ORIENTED_EDGE('',*,*,#180787,.T.); +#180787 = EDGE_CURVE('',#180779,#180788,#180790,.T.); +#180788 = VERTEX_POINT('',#180789); +#180789 = CARTESIAN_POINT('',(195.48165,-93.9431,1.585)); +#180790 = LINE('',#180791,#180792); +#180791 = CARTESIAN_POINT('',(197.60165,-93.9431,1.585)); +#180792 = VECTOR('',#180793,1.); +#180793 = DIRECTION('',(-1.,0.,0.)); +#180794 = ORIENTED_EDGE('',*,*,#180795,.T.); +#180795 = EDGE_CURVE('',#180788,#180796,#180798,.T.); +#180796 = VERTEX_POINT('',#180797); +#180797 = CARTESIAN_POINT('',(195.42165,-93.8831,1.585)); +#180798 = CIRCLE('',#180799,5.999932016256E-02); +#180799 = AXIS2_PLACEMENT_3D('',#180800,#180801,#180802); +#180800 = CARTESIAN_POINT('',(195.48164932015,-93.88310067984,1.585)); +#180801 = DIRECTION('',(0.,0.,-1.)); +#180802 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#180803 = ORIENTED_EDGE('',*,*,#180804,.T.); +#180804 = EDGE_CURVE('',#180796,#180743,#180805,.T.); +#180805 = LINE('',#180806,#180807); +#180806 = CARTESIAN_POINT('',(195.42165,-93.8831,1.585)); +#180807 = VECTOR('',#180808,1.); +#180808 = DIRECTION('',(0.,1.,0.)); +#180809 = FACE_BOUND('',#180810,.F.); +#180810 = EDGE_LOOP('',(#180811,#180821,#180829,#180837)); +#180811 = ORIENTED_EDGE('',*,*,#180812,.T.); +#180812 = EDGE_CURVE('',#180813,#180815,#180817,.T.); +#180813 = VERTEX_POINT('',#180814); +#180814 = CARTESIAN_POINT('',(197.54165,-93.8231,1.585)); +#180815 = VERTEX_POINT('',#180816); +#180816 = CARTESIAN_POINT('',(197.54165,-75.8831,1.585)); +#180817 = LINE('',#180818,#180819); +#180818 = CARTESIAN_POINT('',(197.54165,-93.8231,1.585)); +#180819 = VECTOR('',#180820,1.); +#180820 = DIRECTION('',(0.,1.,0.)); +#180821 = ORIENTED_EDGE('',*,*,#180822,.T.); +#180822 = EDGE_CURVE('',#180815,#180823,#180825,.T.); +#180823 = VERTEX_POINT('',#180824); +#180824 = CARTESIAN_POINT('',(195.54165,-75.8831,1.585)); +#180825 = LINE('',#180826,#180827); +#180826 = CARTESIAN_POINT('',(197.54165,-75.8831,1.585)); +#180827 = VECTOR('',#180828,1.); +#180828 = DIRECTION('',(-1.,0.,0.)); +#180829 = ORIENTED_EDGE('',*,*,#180830,.T.); +#180830 = EDGE_CURVE('',#180823,#180831,#180833,.T.); +#180831 = VERTEX_POINT('',#180832); +#180832 = CARTESIAN_POINT('',(195.54165,-93.8231,1.585)); +#180833 = LINE('',#180834,#180835); +#180834 = CARTESIAN_POINT('',(195.54165,-75.8831,1.585)); +#180835 = VECTOR('',#180836,1.); +#180836 = DIRECTION('',(0.,-1.,0.)); +#180837 = ORIENTED_EDGE('',*,*,#180838,.T.); +#180838 = EDGE_CURVE('',#180831,#180813,#180839,.T.); +#180839 = LINE('',#180840,#180841); +#180840 = CARTESIAN_POINT('',(195.54165,-93.8231,1.585)); +#180841 = VECTOR('',#180842,1.); +#180842 = DIRECTION('',(1.,0.,0.)); +#180843 = PLANE('',#180844); +#180844 = AXIS2_PLACEMENT_3D('',#180845,#180846,#180847); +#180845 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180846 = DIRECTION('',(0.,0.,1.)); +#180847 = DIRECTION('',(1.,0.,-0.)); +#180848 = SHELL_BASED_SURFACE_MODEL('',(#180849)); +#180849 = OPEN_SHELL('',(#180850)); +#180850 = ADVANCED_FACE('',(#180851),#180887,.T.); +#180851 = FACE_BOUND('',#180852,.F.); +#180852 = EDGE_LOOP('',(#180853,#180864,#180872,#180881)); +#180853 = ORIENTED_EDGE('',*,*,#180854,.T.); +#180854 = EDGE_CURVE('',#180855,#180857,#180859,.T.); +#180855 = VERTEX_POINT('',#180856); +#180856 = CARTESIAN_POINT('',(93.954392,-93.8606,1.585)); +#180857 = VERTEX_POINT('',#180858); +#180858 = CARTESIAN_POINT('',(93.954392,-93.7406,1.585)); +#180859 = CIRCLE('',#180860,6.000000000042E-02); +#180860 = AXIS2_PLACEMENT_3D('',#180861,#180862,#180863); +#180861 = CARTESIAN_POINT('',(93.954391774412,-93.8006,1.585)); +#180862 = DIRECTION('',(0.,0.,-1.)); +#180863 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#180864 = ORIENTED_EDGE('',*,*,#180865,.T.); +#180865 = EDGE_CURVE('',#180857,#180866,#180868,.T.); +#180866 = VERTEX_POINT('',#180867); +#180867 = CARTESIAN_POINT('',(94.428908,-93.7406,1.585)); +#180868 = LINE('',#180869,#180870); +#180869 = CARTESIAN_POINT('',(93.954392,-93.7406,1.585)); +#180870 = VECTOR('',#180871,1.); +#180871 = DIRECTION('',(1.,0.,0.)); +#180872 = ORIENTED_EDGE('',*,*,#180873,.T.); +#180873 = EDGE_CURVE('',#180866,#180874,#180876,.T.); +#180874 = VERTEX_POINT('',#180875); +#180875 = CARTESIAN_POINT('',(94.428908,-93.8606,1.585)); +#180876 = CIRCLE('',#180877,6.000000000043E-02); +#180877 = AXIS2_PLACEMENT_3D('',#180878,#180879,#180880); +#180878 = CARTESIAN_POINT('',(94.428908225588,-93.8006,1.585)); +#180879 = DIRECTION('',(0.,0.,-1.)); +#180880 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#180881 = ORIENTED_EDGE('',*,*,#180882,.T.); +#180882 = EDGE_CURVE('',#180874,#180855,#180883,.T.); +#180883 = LINE('',#180884,#180885); +#180884 = CARTESIAN_POINT('',(94.428908,-93.8606,1.585)); +#180885 = VECTOR('',#180886,1.); +#180886 = DIRECTION('',(-1.,0.,0.)); +#180887 = PLANE('',#180888); +#180888 = AXIS2_PLACEMENT_3D('',#180889,#180890,#180891); +#180889 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180890 = DIRECTION('',(0.,0.,1.)); +#180891 = DIRECTION('',(1.,0.,-0.)); +#180892 = SHELL_BASED_SURFACE_MODEL('',(#180893)); +#180893 = OPEN_SHELL('',(#180894)); +#180894 = ADVANCED_FACE('',(#180895),#180931,.T.); +#180895 = FACE_BOUND('',#180896,.F.); +#180896 = EDGE_LOOP('',(#180897,#180908,#180916,#180925)); +#180897 = ORIENTED_EDGE('',*,*,#180898,.T.); +#180898 = EDGE_CURVE('',#180899,#180901,#180903,.T.); +#180899 = VERTEX_POINT('',#180900); +#180900 = CARTESIAN_POINT('',(98.954392,-93.8606,1.585)); +#180901 = VERTEX_POINT('',#180902); +#180902 = CARTESIAN_POINT('',(98.954392,-93.7406,1.585)); +#180903 = CIRCLE('',#180904,6.000000000042E-02); +#180904 = AXIS2_PLACEMENT_3D('',#180905,#180906,#180907); +#180905 = CARTESIAN_POINT('',(98.954391774412,-93.8006,1.585)); +#180906 = DIRECTION('',(0.,0.,-1.)); +#180907 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#180908 = ORIENTED_EDGE('',*,*,#180909,.T.); +#180909 = EDGE_CURVE('',#180901,#180910,#180912,.T.); +#180910 = VERTEX_POINT('',#180911); +#180911 = CARTESIAN_POINT('',(99.428908,-93.7406,1.585)); +#180912 = LINE('',#180913,#180914); +#180913 = CARTESIAN_POINT('',(98.954392,-93.7406,1.585)); +#180914 = VECTOR('',#180915,1.); +#180915 = DIRECTION('',(1.,0.,0.)); +#180916 = ORIENTED_EDGE('',*,*,#180917,.T.); +#180917 = EDGE_CURVE('',#180910,#180918,#180920,.T.); +#180918 = VERTEX_POINT('',#180919); +#180919 = CARTESIAN_POINT('',(99.428908,-93.8606,1.585)); +#180920 = CIRCLE('',#180921,6.000000000043E-02); +#180921 = AXIS2_PLACEMENT_3D('',#180922,#180923,#180924); +#180922 = CARTESIAN_POINT('',(99.428908225588,-93.8006,1.585)); +#180923 = DIRECTION('',(0.,0.,-1.)); +#180924 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#180925 = ORIENTED_EDGE('',*,*,#180926,.T.); +#180926 = EDGE_CURVE('',#180918,#180899,#180927,.T.); +#180927 = LINE('',#180928,#180929); +#180928 = CARTESIAN_POINT('',(99.428908,-93.8606,1.585)); +#180929 = VECTOR('',#180930,1.); +#180930 = DIRECTION('',(-1.,0.,0.)); +#180931 = PLANE('',#180932); +#180932 = AXIS2_PLACEMENT_3D('',#180933,#180934,#180935); +#180933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#180934 = DIRECTION('',(0.,0.,1.)); +#180935 = DIRECTION('',(1.,0.,-0.)); +#180936 = SHELL_BASED_SURFACE_MODEL('',(#180937)); +#180937 = OPEN_SHELL('',(#180938)); +#180938 = ADVANCED_FACE('',(#180939),#181217,.T.); +#180939 = FACE_BOUND('',#180940,.F.); +#180940 = EDGE_LOOP('',(#180941,#180951,#180959,#180967,#180975,#180984, + #180992,#181001,#181009,#181017,#181025,#181033,#181041,#181049, + #181057,#181065,#181073,#181081,#181089,#181097,#181105,#181113, + #181122,#181130,#181139,#181147,#181155,#181163,#181171,#181179, + #181187,#181195,#181203,#181211)); +#180941 = ORIENTED_EDGE('',*,*,#180942,.T.); +#180942 = EDGE_CURVE('',#180943,#180945,#180947,.T.); +#180943 = VERTEX_POINT('',#180944); +#180944 = CARTESIAN_POINT('',(96.885563,-93.16387,1.585)); +#180945 = VERTEX_POINT('',#180946); +#180946 = CARTESIAN_POINT('',(96.99971,-93.109774,1.585)); +#180947 = LINE('',#180948,#180949); +#180948 = CARTESIAN_POINT('',(96.885563,-93.16387,1.585)); +#180949 = VECTOR('',#180950,1.); +#180950 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#180951 = ORIENTED_EDGE('',*,*,#180952,.T.); +#180952 = EDGE_CURVE('',#180945,#180953,#180955,.T.); +#180953 = VERTEX_POINT('',#180954); +#180954 = CARTESIAN_POINT('',(97.076593,-93.109774,1.585)); +#180955 = LINE('',#180956,#180957); +#180956 = CARTESIAN_POINT('',(96.99971,-93.109774,1.585)); +#180957 = VECTOR('',#180958,1.); +#180958 = DIRECTION('',(1.,0.,0.)); +#180959 = ORIENTED_EDGE('',*,*,#180960,.T.); +#180960 = EDGE_CURVE('',#180953,#180961,#180963,.T.); +#180961 = VERTEX_POINT('',#180962); +#180962 = CARTESIAN_POINT('',(97.203183,-93.171702,1.585)); +#180963 = LINE('',#180964,#180965); +#180964 = CARTESIAN_POINT('',(97.076593,-93.109774,1.585)); +#180965 = VECTOR('',#180966,1.); +#180966 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#180967 = ORIENTED_EDGE('',*,*,#180968,.T.); +#180968 = EDGE_CURVE('',#180961,#180969,#180971,.T.); +#180969 = VERTEX_POINT('',#180970); +#180970 = CARTESIAN_POINT('',(97.224282,-93.197411,1.585)); +#180971 = LINE('',#180972,#180973); +#180972 = CARTESIAN_POINT('',(97.203183,-93.171702,1.585)); +#180973 = VECTOR('',#180974,1.); +#180974 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#180975 = ORIENTED_EDGE('',*,*,#180976,.T.); +#180976 = EDGE_CURVE('',#180969,#180977,#180979,.T.); +#180977 = VERTEX_POINT('',#180978); +#180978 = CARTESIAN_POINT('',(97.21645,-93.657888,1.585)); +#180979 = CIRCLE('',#180980,0.396588066051); +#180980 = AXIS2_PLACEMENT_3D('',#180981,#180982,#180983); +#180981 = CARTESIAN_POINT('',(96.897524180083,-93.42215846107,1.585)); +#180982 = DIRECTION('',(0.,0.,-1.)); +#180983 = DIRECTION('',(0.82392247243,0.566702531691,0.)); +#180984 = ORIENTED_EDGE('',*,*,#180985,.T.); +#180985 = EDGE_CURVE('',#180977,#180986,#180988,.T.); +#180986 = VERTEX_POINT('',#180987); +#180987 = CARTESIAN_POINT('',(97.194342,-93.677061,1.585)); +#180988 = LINE('',#180989,#180990); +#180989 = CARTESIAN_POINT('',(97.21645,-93.657888,1.585)); +#180990 = VECTOR('',#180991,1.); +#180991 = DIRECTION('',(-0.755473689205,-0.655178986934,0.)); +#180992 = ORIENTED_EDGE('',*,*,#180993,.T.); +#180993 = EDGE_CURVE('',#180986,#180994,#180996,.T.); +#180994 = VERTEX_POINT('',#180995); +#180995 = CARTESIAN_POINT('',(97.090118,-93.578363,1.585)); +#180996 = CIRCLE('',#180997,7.499954050663E-02); +#180997 = AXIS2_PLACEMENT_3D('',#180998,#180999,#181000); +#180998 = CARTESIAN_POINT('',(97.1571991799,-93.61190471103,1.585)); +#180999 = DIRECTION('',(0.,0.,-1.)); +#181000 = DIRECTION('',(0.495240635459,-0.868755841989,0.)); +#181001 = ORIENTED_EDGE('',*,*,#181002,.T.); +#181002 = EDGE_CURVE('',#180994,#181003,#181005,.T.); +#181003 = VERTEX_POINT('',#181004); +#181004 = CARTESIAN_POINT('',(97.129819,-93.498961,1.585)); +#181005 = LINE('',#181006,#181007); +#181006 = CARTESIAN_POINT('',(97.090118,-93.578363,1.585)); +#181007 = VECTOR('',#181008,1.); +#181008 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#181009 = ORIENTED_EDGE('',*,*,#181010,.T.); +#181010 = EDGE_CURVE('',#181003,#181011,#181013,.T.); +#181011 = VERTEX_POINT('',#181012); +#181012 = CARTESIAN_POINT('',(97.129819,-93.343895,1.585)); +#181013 = LINE('',#181014,#181015); +#181014 = CARTESIAN_POINT('',(97.129819,-93.498961,1.585)); +#181015 = VECTOR('',#181016,1.); +#181016 = DIRECTION('',(0.,1.,0.)); +#181017 = ORIENTED_EDGE('',*,*,#181018,.T.); +#181018 = EDGE_CURVE('',#181011,#181019,#181021,.T.); +#181019 = VERTEX_POINT('',#181020); +#181020 = CARTESIAN_POINT('',(97.101298,-93.286853,1.585)); +#181021 = LINE('',#181022,#181023); +#181022 = CARTESIAN_POINT('',(97.129819,-93.343895,1.585)); +#181023 = VECTOR('',#181024,1.); +#181024 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#181025 = ORIENTED_EDGE('',*,*,#181026,.T.); +#181026 = EDGE_CURVE('',#181019,#181027,#181029,.T.); +#181027 = VERTEX_POINT('',#181028); +#181028 = CARTESIAN_POINT('',(97.044256,-93.258333,1.585)); +#181029 = LINE('',#181030,#181031); +#181030 = CARTESIAN_POINT('',(97.101298,-93.286853,1.585)); +#181031 = VECTOR('',#181032,1.); +#181032 = DIRECTION('',(-0.894433463016,0.447201051247,0.)); +#181033 = ORIENTED_EDGE('',*,*,#181034,.T.); +#181034 = EDGE_CURVE('',#181027,#181035,#181037,.T.); +#181035 = VERTEX_POINT('',#181036); +#181036 = CARTESIAN_POINT('',(97.032047,-93.258333,1.585)); +#181037 = LINE('',#181038,#181039); +#181038 = CARTESIAN_POINT('',(97.044256,-93.258333,1.585)); +#181039 = VECTOR('',#181040,1.); +#181040 = DIRECTION('',(-1.,0.,0.)); +#181041 = ORIENTED_EDGE('',*,*,#181042,.T.); +#181042 = EDGE_CURVE('',#181035,#181043,#181045,.T.); +#181043 = VERTEX_POINT('',#181044); +#181044 = CARTESIAN_POINT('',(96.975005,-93.286853,1.585)); +#181045 = LINE('',#181046,#181047); +#181046 = CARTESIAN_POINT('',(97.032047,-93.258333,1.585)); +#181047 = VECTOR('',#181048,1.); +#181048 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#181049 = ORIENTED_EDGE('',*,*,#181050,.T.); +#181050 = EDGE_CURVE('',#181043,#181051,#181053,.T.); +#181051 = VERTEX_POINT('',#181052); +#181052 = CARTESIAN_POINT('',(96.946485,-93.343895,1.585)); +#181053 = LINE('',#181054,#181055); +#181054 = CARTESIAN_POINT('',(96.975005,-93.286853,1.585)); +#181055 = VECTOR('',#181056,1.); +#181056 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#181057 = ORIENTED_EDGE('',*,*,#181058,.T.); +#181058 = EDGE_CURVE('',#181051,#181059,#181061,.T.); +#181059 = VERTEX_POINT('',#181060); +#181060 = CARTESIAN_POINT('',(96.943822,-93.488857,1.585)); +#181061 = LINE('',#181062,#181063); +#181062 = CARTESIAN_POINT('',(96.946485,-93.343895,1.585)); +#181063 = VECTOR('',#181064,1.); +#181064 = DIRECTION('',(-1.836723261002E-02,-0.999831308155,0.)); +#181065 = ORIENTED_EDGE('',*,*,#181066,.T.); +#181066 = EDGE_CURVE('',#181059,#181067,#181069,.T.); +#181067 = VERTEX_POINT('',#181068); +#181068 = CARTESIAN_POINT('',(96.883116,-93.610269,1.585)); +#181069 = LINE('',#181070,#181071); +#181070 = CARTESIAN_POINT('',(96.943822,-93.488857,1.585)); +#181071 = VECTOR('',#181072,1.); +#181072 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#181073 = ORIENTED_EDGE('',*,*,#181074,.T.); +#181074 = EDGE_CURVE('',#181067,#181075,#181077,.T.); +#181075 = VERTEX_POINT('',#181076); +#181076 = CARTESIAN_POINT('',(96.857407,-93.631367,1.585)); +#181077 = LINE('',#181078,#181079); +#181078 = CARTESIAN_POINT('',(96.883116,-93.610269,1.585)); +#181079 = VECTOR('',#181080,1.); +#181080 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#181081 = ORIENTED_EDGE('',*,*,#181082,.T.); +#181082 = EDGE_CURVE('',#181075,#181083,#181085,.T.); +#181083 = VERTEX_POINT('',#181084); +#181084 = CARTESIAN_POINT('',(96.74326,-93.685463,1.585)); +#181085 = LINE('',#181086,#181087); +#181086 = CARTESIAN_POINT('',(96.857407,-93.631367,1.585)); +#181087 = VECTOR('',#181088,1.); +#181088 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#181089 = ORIENTED_EDGE('',*,*,#181090,.T.); +#181090 = EDGE_CURVE('',#181083,#181091,#181093,.T.); +#181091 = VERTEX_POINT('',#181092); +#181092 = CARTESIAN_POINT('',(96.661199,-93.684241,1.585)); +#181093 = LINE('',#181094,#181095); +#181094 = CARTESIAN_POINT('',(96.74326,-93.685463,1.585)); +#181095 = VECTOR('',#181096,1.); +#181096 = DIRECTION('',(-0.999889142116,1.488971047957E-02,0.)); +#181097 = ORIENTED_EDGE('',*,*,#181098,.T.); +#181098 = EDGE_CURVE('',#181091,#181099,#181101,.T.); +#181099 = VERTEX_POINT('',#181100); +#181100 = CARTESIAN_POINT('',(96.539787,-93.623535,1.585)); +#181101 = LINE('',#181102,#181103); +#181102 = CARTESIAN_POINT('',(96.661199,-93.684241,1.585)); +#181103 = VECTOR('',#181104,1.); +#181104 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#181105 = ORIENTED_EDGE('',*,*,#181106,.T.); +#181106 = EDGE_CURVE('',#181099,#181107,#181109,.T.); +#181107 = VERTEX_POINT('',#181108); +#181108 = CARTESIAN_POINT('',(96.518689,-93.597826,1.585)); +#181109 = LINE('',#181110,#181111); +#181110 = CARTESIAN_POINT('',(96.539787,-93.623535,1.585)); +#181111 = VECTOR('',#181112,1.); +#181112 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#181113 = ORIENTED_EDGE('',*,*,#181114,.T.); +#181114 = EDGE_CURVE('',#181107,#181115,#181117,.T.); +#181115 = VERTEX_POINT('',#181116); +#181116 = CARTESIAN_POINT('',(96.526521,-93.184968,1.585)); +#181117 = CIRCLE('',#181118,0.342521496488); +#181118 = AXIS2_PLACEMENT_3D('',#181119,#181120,#181121); +#181119 = CARTESIAN_POINT('',(96.795855505158,-93.3965806175,1.585)); +#181120 = DIRECTION('',(0.,0.,-1.)); +#181121 = DIRECTION('',(-0.809194482681,-0.587540883002,-0.)); +#181122 = ORIENTED_EDGE('',*,*,#181123,.T.); +#181123 = EDGE_CURVE('',#181115,#181124,#181126,.T.); +#181124 = VERTEX_POINT('',#181125); +#181125 = CARTESIAN_POINT('',(96.548629,-93.165795,1.585)); +#181126 = LINE('',#181127,#181128); +#181127 = CARTESIAN_POINT('',(96.526521,-93.184968,1.585)); +#181128 = VECTOR('',#181129,1.); +#181129 = DIRECTION('',(0.755473689205,0.655178986933,0.)); +#181130 = ORIENTED_EDGE('',*,*,#181131,.T.); +#181131 = EDGE_CURVE('',#181124,#181132,#181134,.T.); +#181132 = VERTEX_POINT('',#181133); +#181133 = CARTESIAN_POINT('',(96.652853,-93.264493,1.585)); +#181134 = CIRCLE('',#181135,7.499986582492E-02); +#181135 = AXIS2_PLACEMENT_3D('',#181136,#181137,#181138); +#181136 = CARTESIAN_POINT('',(96.585771049506,-93.2309521027,1.585)); +#181137 = DIRECTION('',(0.,0.,-1.)); +#181138 = DIRECTION('',(-0.495228212713,0.868762923549,0.)); +#181139 = ORIENTED_EDGE('',*,*,#181140,.T.); +#181140 = EDGE_CURVE('',#181132,#181141,#181143,.T.); +#181141 = VERTEX_POINT('',#181142); +#181142 = CARTESIAN_POINT('',(96.613152,-93.343895,1.585)); +#181143 = LINE('',#181144,#181145); +#181144 = CARTESIAN_POINT('',(96.652853,-93.264493,1.585)); +#181145 = VECTOR('',#181146,1.); +#181146 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#181147 = ORIENTED_EDGE('',*,*,#181148,.T.); +#181148 = EDGE_CURVE('',#181141,#181149,#181151,.T.); +#181149 = VERTEX_POINT('',#181150); +#181150 = CARTESIAN_POINT('',(96.613152,-93.451342,1.585)); +#181151 = LINE('',#181152,#181153); +#181152 = CARTESIAN_POINT('',(96.613152,-93.343895,1.585)); +#181153 = VECTOR('',#181154,1.); +#181154 = DIRECTION('',(0.,-1.,0.)); +#181155 = ORIENTED_EDGE('',*,*,#181156,.T.); +#181156 = EDGE_CURVE('',#181149,#181157,#181159,.T.); +#181157 = VERTEX_POINT('',#181158); +#181158 = CARTESIAN_POINT('',(96.641672,-93.508383,1.585)); +#181159 = LINE('',#181160,#181161); +#181160 = CARTESIAN_POINT('',(96.613152,-93.451342,1.585)); +#181161 = VECTOR('',#181162,1.); +#181162 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#181163 = ORIENTED_EDGE('',*,*,#181164,.T.); +#181164 = EDGE_CURVE('',#181157,#181165,#181167,.T.); +#181165 = VERTEX_POINT('',#181166); +#181166 = CARTESIAN_POINT('',(96.698714,-93.536904,1.585)); +#181167 = LINE('',#181168,#181169); +#181168 = CARTESIAN_POINT('',(96.641672,-93.508383,1.585)); +#181169 = VECTOR('',#181170,1.); +#181170 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#181171 = ORIENTED_EDGE('',*,*,#181172,.T.); +#181172 = EDGE_CURVE('',#181165,#181173,#181175,.T.); +#181173 = VERTEX_POINT('',#181174); +#181174 = CARTESIAN_POINT('',(96.710923,-93.536904,1.585)); +#181175 = LINE('',#181176,#181177); +#181176 = CARTESIAN_POINT('',(96.698714,-93.536904,1.585)); +#181177 = VECTOR('',#181178,1.); +#181178 = DIRECTION('',(1.,0.,0.)); +#181179 = ORIENTED_EDGE('',*,*,#181180,.T.); +#181180 = EDGE_CURVE('',#181173,#181181,#181183,.T.); +#181181 = VERTEX_POINT('',#181182); +#181182 = CARTESIAN_POINT('',(96.767964,-93.508383,1.585)); +#181183 = LINE('',#181184,#181185); +#181184 = CARTESIAN_POINT('',(96.710923,-93.536904,1.585)); +#181185 = VECTOR('',#181186,1.); +#181186 = DIRECTION('',(0.894424054904,0.447219867638,0.)); +#181187 = ORIENTED_EDGE('',*,*,#181188,.T.); +#181188 = EDGE_CURVE('',#181181,#181189,#181191,.T.); +#181189 = VERTEX_POINT('',#181190); +#181190 = CARTESIAN_POINT('',(96.796485,-93.451342,1.585)); +#181191 = LINE('',#181192,#181193); +#181192 = CARTESIAN_POINT('',(96.767964,-93.508383,1.585)); +#181193 = VECTOR('',#181194,1.); +#181194 = DIRECTION('',(0.447219867637,0.894424054904,0.)); +#181195 = ORIENTED_EDGE('',*,*,#181196,.T.); +#181196 = EDGE_CURVE('',#181189,#181197,#181199,.T.); +#181197 = VERTEX_POINT('',#181198); +#181198 = CARTESIAN_POINT('',(96.799148,-93.306381,1.585)); +#181199 = LINE('',#181200,#181201); +#181200 = CARTESIAN_POINT('',(96.796485,-93.451342,1.585)); +#181201 = VECTOR('',#181202,1.); +#181202 = DIRECTION('',(1.836735927193E-02,0.999831305828,0.)); +#181203 = ORIENTED_EDGE('',*,*,#181204,.T.); +#181204 = EDGE_CURVE('',#181197,#181205,#181207,.T.); +#181205 = VERTEX_POINT('',#181206); +#181206 = CARTESIAN_POINT('',(96.859854,-93.184968,1.585)); +#181207 = LINE('',#181208,#181209); +#181208 = CARTESIAN_POINT('',(96.799148,-93.306381,1.585)); +#181209 = VECTOR('',#181210,1.); +#181210 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#181211 = ORIENTED_EDGE('',*,*,#181212,.T.); +#181212 = EDGE_CURVE('',#181205,#180943,#181213,.T.); +#181213 = LINE('',#181214,#181215); +#181214 = CARTESIAN_POINT('',(96.859854,-93.184968,1.585)); +#181215 = VECTOR('',#181216,1.); +#181216 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#181217 = PLANE('',#181218); +#181218 = AXIS2_PLACEMENT_3D('',#181219,#181220,#181221); +#181219 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181220 = DIRECTION('',(0.,0.,1.)); +#181221 = DIRECTION('',(1.,0.,-0.)); +#181222 = SHELL_BASED_SURFACE_MODEL('',(#181223)); +#181223 = OPEN_SHELL('',(#181224)); +#181224 = ADVANCED_FACE('',(#181225),#181311,.T.); +#181225 = FACE_BOUND('',#181226,.F.); +#181226 = EDGE_LOOP('',(#181227,#181238,#181246,#181254,#181263,#181271, + #181280,#181288,#181297,#181305)); +#181227 = ORIENTED_EDGE('',*,*,#181228,.T.); +#181228 = EDGE_CURVE('',#181229,#181231,#181233,.T.); +#181229 = VERTEX_POINT('',#181230); +#181230 = CARTESIAN_POINT('',(140.513686,-92.626918,1.585)); +#181231 = VERTEX_POINT('',#181232); +#181232 = CARTESIAN_POINT('',(140.626286,-92.60452,1.585)); +#181233 = CIRCLE('',#181234,0.150003237278); +#181234 = AXIS2_PLACEMENT_3D('',#181235,#181236,#181237); +#181235 = CARTESIAN_POINT('',(140.54294882175,-92.47979676272,1.585)); +#181236 = DIRECTION('',(0.,0.,1.)); +#181237 = DIRECTION('',(-0.195081268148,-0.980787081286,0.)); +#181238 = ORIENTED_EDGE('',*,*,#181239,.T.); +#181239 = EDGE_CURVE('',#181231,#181240,#181242,.T.); +#181240 = VERTEX_POINT('',#181241); +#181241 = CARTESIAN_POINT('',(140.632954,-92.597851,1.585)); +#181242 = LINE('',#181243,#181244); +#181243 = CARTESIAN_POINT('',(140.626286,-92.60452,1.585)); +#181244 = VECTOR('',#181245,1.); +#181245 = DIRECTION('',(0.707053760772,0.707159797626,0.)); +#181246 = ORIENTED_EDGE('',*,*,#181247,.T.); +#181247 = EDGE_CURVE('',#181240,#181248,#181250,.T.); +#181248 = VERTEX_POINT('',#181249); +#181249 = CARTESIAN_POINT('',(140.631116,-93.208666,1.585)); +#181250 = LINE('',#181251,#181252); +#181251 = CARTESIAN_POINT('',(140.632954,-92.597851,1.585)); +#181252 = VECTOR('',#181253,1.); +#181253 = DIRECTION('',(-3.009080783633E-03,-0.999995472706,0.)); +#181254 = ORIENTED_EDGE('',*,*,#181255,.T.); +#181255 = EDGE_CURVE('',#181248,#181256,#181258,.T.); +#181256 = VERTEX_POINT('',#181257); +#181257 = CARTESIAN_POINT('',(140.280007,-93.552189,1.585)); +#181258 = CIRCLE('',#181259,0.38184101318); +#181259 = AXIS2_PLACEMENT_3D('',#181260,#181261,#181262); +#181260 = CARTESIAN_POINT('',(140.25109350032,-93.17144424444,1.585)); +#181261 = DIRECTION('',(0.,0.,-1.)); +#181262 = DIRECTION('',(0.995237511316,-9.747972132576E-02,0.)); +#181263 = ORIENTED_EDGE('',*,*,#181264,.T.); +#181264 = EDGE_CURVE('',#181256,#181265,#181267,.T.); +#181265 = VERTEX_POINT('',#181266); +#181266 = CARTESIAN_POINT('',(140.162732,-93.551478,1.585)); +#181267 = LINE('',#181268,#181269); +#181268 = CARTESIAN_POINT('',(140.280007,-93.552189,1.585)); +#181269 = VECTOR('',#181270,1.); +#181270 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#181271 = ORIENTED_EDGE('',*,*,#181272,.T.); +#181272 = EDGE_CURVE('',#181265,#181273,#181275,.T.); +#181273 = VERTEX_POINT('',#181274); +#181274 = CARTESIAN_POINT('',(140.177364,-93.402919,1.585)); +#181275 = CIRCLE('',#181276,7.500006711464E-02); +#181276 = AXIS2_PLACEMENT_3D('',#181277,#181278,#181279); +#181277 = CARTESIAN_POINT('',(140.17736393288,-93.47791906711,1.585)); +#181278 = DIRECTION('',(0.,0.,-1.)); +#181279 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#181280 = ORIENTED_EDGE('',*,*,#181281,.T.); +#181281 = EDGE_CURVE('',#181273,#181282,#181284,.T.); +#181282 = VERTEX_POINT('',#181283); +#181283 = CARTESIAN_POINT('',(140.260432,-93.402919,1.585)); +#181284 = LINE('',#181285,#181286); +#181285 = CARTESIAN_POINT('',(140.177364,-93.402919,1.585)); +#181286 = VECTOR('',#181287,1.); +#181287 = DIRECTION('',(1.,0.,0.)); +#181288 = ORIENTED_EDGE('',*,*,#181289,.T.); +#181289 = EDGE_CURVE('',#181282,#181290,#181292,.T.); +#181290 = VERTEX_POINT('',#181291); +#181291 = CARTESIAN_POINT('',(140.483316,-93.180034,1.585)); +#181292 = CIRCLE('',#181293,0.239437351684); +#181293 = AXIS2_PLACEMENT_3D('',#181294,#181295,#181296); +#181294 = CARTESIAN_POINT('',(140.24441490658,-93.16401797844,1.585)); +#181295 = DIRECTION('',(0.,0.,1.)); +#181296 = DIRECTION('',(6.689471506024E-02,-0.997760039838,0.)); +#181297 = ORIENTED_EDGE('',*,*,#181298,.T.); +#181298 = EDGE_CURVE('',#181290,#181299,#181301,.T.); +#181299 = VERTEX_POINT('',#181300); +#181300 = CARTESIAN_POINT('',(140.484452,-92.614808,1.585)); +#181301 = LINE('',#181302,#181303); +#181302 = CARTESIAN_POINT('',(140.483316,-93.180034,1.585)); +#181303 = VECTOR('',#181304,1.); +#181304 = DIRECTION('',(2.009811483643E-03,0.999997980327,0.)); +#181305 = ORIENTED_EDGE('',*,*,#181306,.T.); +#181306 = EDGE_CURVE('',#181299,#181229,#181307,.T.); +#181307 = LINE('',#181308,#181309); +#181308 = CARTESIAN_POINT('',(140.484452,-92.614808,1.585)); +#181309 = VECTOR('',#181310,1.); +#181310 = DIRECTION('',(0.923869691774,-0.382707189142,0.)); +#181311 = PLANE('',#181312); +#181312 = AXIS2_PLACEMENT_3D('',#181313,#181314,#181315); +#181313 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181314 = DIRECTION('',(0.,0.,1.)); +#181315 = DIRECTION('',(1.,0.,-0.)); +#181316 = SHELL_BASED_SURFACE_MODEL('',(#181317)); +#181317 = OPEN_SHELL('',(#181318)); +#181318 = ADVANCED_FACE('',(#181319,#181397),#181449,.T.); +#181319 = FACE_BOUND('',#181320,.F.); +#181320 = EDGE_LOOP('',(#181321,#181332,#181340,#181349,#181357,#181366, + #181374,#181382,#181391)); +#181321 = ORIENTED_EDGE('',*,*,#181322,.T.); +#181322 = EDGE_CURVE('',#181323,#181325,#181327,.T.); +#181323 = VERTEX_POINT('',#181324); +#181324 = CARTESIAN_POINT('',(140.960948,-92.463287,1.585)); +#181325 = VERTEX_POINT('',#181326); +#181326 = CARTESIAN_POINT('',(141.034507,-92.402919,1.585)); +#181327 = CIRCLE('',#181328,7.500074938991E-02); +#181328 = AXIS2_PLACEMENT_3D('',#181329,#181330,#181331); +#181329 = CARTESIAN_POINT('',(141.03450746611,-92.47791974938,1.585)); +#181330 = DIRECTION('',(0.,0.,-1.)); +#181331 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#181332 = ORIENTED_EDGE('',*,*,#181333,.T.); +#181333 = EDGE_CURVE('',#181325,#181334,#181336,.T.); +#181334 = VERTEX_POINT('',#181335); +#181335 = CARTESIAN_POINT('',(141.430091,-92.40436,1.585)); +#181336 = LINE('',#181337,#181338); +#181337 = CARTESIAN_POINT('',(141.034507,-92.402919,1.585)); +#181338 = VECTOR('',#181339,1.); +#181339 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#181340 = ORIENTED_EDGE('',*,*,#181341,.T.); +#181341 = EDGE_CURVE('',#181334,#181342,#181344,.T.); +#181342 = VERTEX_POINT('',#181343); +#181343 = CARTESIAN_POINT('',(141.679494,-92.653763,1.585)); +#181344 = CIRCLE('',#181345,0.347870264855); +#181345 = AXIS2_PLACEMENT_3D('',#181346,#181347,#181348); +#181346 = CARTESIAN_POINT('',(141.34276326502,-92.74109073497,1.585)); +#181347 = DIRECTION('',(0.,0.,-1.)); +#181348 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#181349 = ORIENTED_EDGE('',*,*,#181350,.T.); +#181350 = EDGE_CURVE('',#181342,#181351,#181353,.T.); +#181351 = VERTEX_POINT('',#181352); +#181352 = CARTESIAN_POINT('',(141.678272,-92.831062,1.585)); +#181353 = LINE('',#181354,#181355); +#181354 = CARTESIAN_POINT('',(141.679494,-92.653763,1.585)); +#181355 = VECTOR('',#181356,1.); +#181356 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#181357 = ORIENTED_EDGE('',*,*,#181358,.T.); +#181358 = EDGE_CURVE('',#181351,#181359,#181361,.T.); +#181359 = VERTEX_POINT('',#181360); +#181360 = CARTESIAN_POINT('',(141.430091,-93.075287,1.585)); +#181361 = CIRCLE('',#181362,0.348632345849); +#181362 = AXIS2_PLACEMENT_3D('',#181363,#181364,#181365); +#181363 = CARTESIAN_POINT('',(141.34232219403,-92.7378834593,1.585)); +#181364 = DIRECTION('',(0.,0.,-1.)); +#181365 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#181366 = ORIENTED_EDGE('',*,*,#181367,.T.); +#181367 = EDGE_CURVE('',#181359,#181368,#181370,.T.); +#181368 = VERTEX_POINT('',#181369); +#181369 = CARTESIAN_POINT('',(141.109507,-93.076728,1.585)); +#181370 = LINE('',#181371,#181372); +#181371 = CARTESIAN_POINT('',(141.430091,-93.075287,1.585)); +#181372 = VECTOR('',#181373,1.); +#181373 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#181374 = ORIENTED_EDGE('',*,*,#181375,.T.); +#181375 = EDGE_CURVE('',#181368,#181376,#181378,.T.); +#181376 = VERTEX_POINT('',#181377); +#181377 = CARTESIAN_POINT('',(141.108066,-93.492551,1.585)); +#181378 = LINE('',#181379,#181380); +#181379 = CARTESIAN_POINT('',(141.109507,-93.076728,1.585)); +#181380 = VECTOR('',#181381,1.); +#181381 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#181382 = ORIENTED_EDGE('',*,*,#181383,.T.); +#181383 = EDGE_CURVE('',#181376,#181384,#181386,.T.); +#181384 = VERTEX_POINT('',#181385); +#181385 = CARTESIAN_POINT('',(140.959507,-93.477919,1.585)); +#181386 = CIRCLE('',#181387,7.500006711463E-02); +#181387 = AXIS2_PLACEMENT_3D('',#181388,#181389,#181390); +#181388 = CARTESIAN_POINT('',(141.03450706711,-93.47791906711,1.585)); +#181389 = DIRECTION('',(-0.,0.,-1.)); +#181390 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#181391 = ORIENTED_EDGE('',*,*,#181392,.T.); +#181392 = EDGE_CURVE('',#181384,#181323,#181393,.T.); +#181393 = LINE('',#181394,#181395); +#181394 = CARTESIAN_POINT('',(140.959507,-93.477919,1.585)); +#181395 = VECTOR('',#181396,1.); +#181396 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#181397 = FACE_BOUND('',#181398,.F.); +#181398 = EDGE_LOOP('',(#181399,#181410,#181418,#181426,#181434,#181443) + ); +#181399 = ORIENTED_EDGE('',*,*,#181400,.T.); +#181400 = EDGE_CURVE('',#181401,#181403,#181405,.T.); +#181401 = VERTEX_POINT('',#181402); +#181402 = CARTESIAN_POINT('',(141.530935,-92.6861,1.585)); +#181403 = VERTEX_POINT('',#181404); +#181404 = CARTESIAN_POINT('',(141.397754,-92.552919,1.585)); +#181405 = CIRCLE('',#181406,0.18686440374); +#181406 = AXIS2_PLACEMENT_3D('',#181407,#181408,#181409); +#181407 = CARTESIAN_POINT('',(141.350218,-92.733636,1.585)); +#181408 = DIRECTION('',(0.,0.,1.)); +#181409 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#181410 = ORIENTED_EDGE('',*,*,#181411,.T.); +#181411 = EDGE_CURVE('',#181403,#181412,#181414,.T.); +#181412 = VERTEX_POINT('',#181413); +#181413 = CARTESIAN_POINT('',(141.109507,-92.552919,1.585)); +#181414 = LINE('',#181415,#181416); +#181415 = CARTESIAN_POINT('',(141.397754,-92.552919,1.585)); +#181416 = VECTOR('',#181417,1.); +#181417 = DIRECTION('',(-1.,0.,0.)); +#181418 = ORIENTED_EDGE('',*,*,#181419,.T.); +#181419 = EDGE_CURVE('',#181412,#181420,#181422,.T.); +#181420 = VERTEX_POINT('',#181421); +#181421 = CARTESIAN_POINT('',(141.109507,-92.926728,1.585)); +#181422 = LINE('',#181423,#181424); +#181423 = CARTESIAN_POINT('',(141.109507,-92.552919,1.585)); +#181424 = VECTOR('',#181425,1.); +#181425 = DIRECTION('',(0.,-1.,0.)); +#181426 = ORIENTED_EDGE('',*,*,#181427,.T.); +#181427 = EDGE_CURVE('',#181420,#181428,#181430,.T.); +#181428 = VERTEX_POINT('',#181429); +#181429 = CARTESIAN_POINT('',(141.397754,-92.926728,1.585)); +#181430 = LINE('',#181431,#181432); +#181431 = CARTESIAN_POINT('',(141.109507,-92.926728,1.585)); +#181432 = VECTOR('',#181433,1.); +#181433 = DIRECTION('',(1.,0.,0.)); +#181434 = ORIENTED_EDGE('',*,*,#181435,.T.); +#181435 = EDGE_CURVE('',#181428,#181436,#181438,.T.); +#181436 = VERTEX_POINT('',#181437); +#181437 = CARTESIAN_POINT('',(141.530935,-92.793547,1.585)); +#181438 = CIRCLE('',#181439,0.18686440374); +#181439 = AXIS2_PLACEMENT_3D('',#181440,#181441,#181442); +#181440 = CARTESIAN_POINT('',(141.350218,-92.746011,1.585)); +#181441 = DIRECTION('',(0.,0.,1.)); +#181442 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#181443 = ORIENTED_EDGE('',*,*,#181444,.T.); +#181444 = EDGE_CURVE('',#181436,#181401,#181445,.T.); +#181445 = LINE('',#181446,#181447); +#181446 = CARTESIAN_POINT('',(141.530935,-92.793547,1.585)); +#181447 = VECTOR('',#181448,1.); +#181448 = DIRECTION('',(0.,1.,0.)); +#181449 = PLANE('',#181450); +#181450 = AXIS2_PLACEMENT_3D('',#181451,#181452,#181453); +#181451 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181452 = DIRECTION('',(0.,0.,1.)); +#181453 = DIRECTION('',(1.,0.,-0.)); +#181454 = SHELL_BASED_SURFACE_MODEL('',(#181455)); +#181455 = OPEN_SHELL('',(#181456)); +#181456 = ADVANCED_FACE('',(#181457),#181643,.T.); +#181457 = FACE_BOUND('',#181458,.F.); +#181458 = EDGE_LOOP('',(#181459,#181470,#181478,#181487,#181495,#181503, + #181512,#181520,#181529,#181537,#181545,#181553,#181562,#181570, + #181579,#181587,#181596,#181604,#181612,#181620,#181629,#181637)); +#181459 = ORIENTED_EDGE('',*,*,#181460,.T.); +#181460 = EDGE_CURVE('',#181461,#181463,#181465,.T.); +#181461 = VERTEX_POINT('',#181462); +#181462 = CARTESIAN_POINT('',(141.924637,-92.551478,1.585)); +#181463 = VERTEX_POINT('',#181464); +#181464 = CARTESIAN_POINT('',(141.939269,-92.402919,1.585)); +#181465 = CIRCLE('',#181466,7.500006711464E-02); +#181466 = AXIS2_PLACEMENT_3D('',#181467,#181468,#181469); +#181467 = CARTESIAN_POINT('',(141.93926893288,-92.47791906711,1.585)); +#181468 = DIRECTION('',(0.,0.,-1.)); +#181469 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#181470 = ORIENTED_EDGE('',*,*,#181471,.T.); +#181471 = EDGE_CURVE('',#181463,#181472,#181474,.T.); +#181472 = VERTEX_POINT('',#181473); +#181473 = CARTESIAN_POINT('',(142.566054,-92.403681,1.585)); +#181474 = LINE('',#181475,#181476); +#181475 = CARTESIAN_POINT('',(141.939269,-92.402919,1.585)); +#181476 = VECTOR('',#181477,1.); +#181477 = DIRECTION('',(0.999999261004,-1.215726982767E-03,0.)); +#181478 = ORIENTED_EDGE('',*,*,#181479,.T.); +#181479 = EDGE_CURVE('',#181472,#181480,#181482,.T.); +#181480 = VERTEX_POINT('',#181481); +#181481 = CARTESIAN_POINT('',(142.631875,-92.492551,1.585)); +#181482 = CIRCLE('',#181483,7.447391611626E-02); +#181483 = AXIS2_PLACEMENT_3D('',#181484,#181485,#181486); +#181484 = CARTESIAN_POINT('',(142.55887492664,-92.4778080874,1.585)); +#181485 = DIRECTION('',(0.,0.,-1.)); +#181486 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#181487 = ORIENTED_EDGE('',*,*,#181488,.T.); +#181488 = EDGE_CURVE('',#181480,#181489,#181491,.T.); +#181489 = VERTEX_POINT('',#181490); +#181490 = CARTESIAN_POINT('',(142.614759,-92.527307,1.585)); +#181491 = LINE('',#181492,#181493); +#181492 = CARTESIAN_POINT('',(142.631875,-92.492551,1.585)); +#181493 = VECTOR('',#181494,1.); +#181494 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#181495 = ORIENTED_EDGE('',*,*,#181496,.T.); +#181496 = EDGE_CURVE('',#181489,#181497,#181499,.T.); +#181497 = VERTEX_POINT('',#181498); +#181498 = CARTESIAN_POINT('',(142.387863,-92.786616,1.585)); +#181499 = LINE('',#181500,#181501); +#181500 = CARTESIAN_POINT('',(142.614759,-92.527307,1.585)); +#181501 = VECTOR('',#181502,1.); +#181502 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#181503 = ORIENTED_EDGE('',*,*,#181504,.T.); +#181504 = EDGE_CURVE('',#181497,#181505,#181507,.T.); +#181505 = VERTEX_POINT('',#181506); +#181506 = CARTESIAN_POINT('',(142.631875,-93.034715,1.585)); +#181507 = CIRCLE('',#181508,0.348520834816); +#181508 = AXIS2_PLACEMENT_3D('',#181509,#181510,#181511); +#181509 = CARTESIAN_POINT('',(142.2945696174,-93.12241819931,1.585)); +#181510 = DIRECTION('',(0.,0.,-1.)); +#181511 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#181512 = ORIENTED_EDGE('',*,*,#181513,.T.); +#181513 = EDGE_CURVE('',#181505,#181514,#181516,.T.); +#181514 = VERTEX_POINT('',#181515); +#181515 = CARTESIAN_POINT('',(142.630653,-93.307252,1.585)); +#181516 = LINE('',#181517,#181518); +#181517 = CARTESIAN_POINT('',(142.631875,-93.034715,1.585)); +#181518 = VECTOR('',#181519,1.); +#181519 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#181520 = ORIENTED_EDGE('',*,*,#181521,.T.); +#181521 = EDGE_CURVE('',#181514,#181522,#181524,.T.); +#181522 = VERTEX_POINT('',#181523); +#181523 = CARTESIAN_POINT('',(142.382472,-93.551478,1.585)); +#181524 = CIRCLE('',#181525,0.348635327447); +#181525 = AXIS2_PLACEMENT_3D('',#181526,#181527,#181528); +#181526 = CARTESIAN_POINT('',(142.29470048129,-93.21407208415,1.585)); +#181527 = DIRECTION('',(0.,0.,-1.)); +#181528 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#181529 = ORIENTED_EDGE('',*,*,#181530,.T.); +#181530 = EDGE_CURVE('',#181522,#181531,#181533,.T.); +#181531 = VERTEX_POINT('',#181532); +#181532 = CARTESIAN_POINT('',(142.062316,-93.550256,1.585)); +#181533 = LINE('',#181534,#181535); +#181534 = CARTESIAN_POINT('',(142.382472,-93.551478,1.585)); +#181535 = VECTOR('',#181536,1.); +#181536 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#181537 = ORIENTED_EDGE('',*,*,#181538,.T.); +#181538 = EDGE_CURVE('',#181531,#181539,#181541,.T.); +#181539 = VERTEX_POINT('',#181540); +#181540 = CARTESIAN_POINT('',(141.939603,-93.48805,1.585)); +#181541 = LINE('',#181542,#181543); +#181542 = CARTESIAN_POINT('',(142.062316,-93.550256,1.585)); +#181543 = VECTOR('',#181544,1.); +#181544 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#181545 = ORIENTED_EDGE('',*,*,#181546,.T.); +#181546 = EDGE_CURVE('',#181539,#181547,#181549,.T.); +#181547 = VERTEX_POINT('',#181548); +#181548 = CARTESIAN_POINT('',(141.876908,-93.424347,1.585)); +#181549 = LINE('',#181550,#181551); +#181550 = CARTESIAN_POINT('',(141.939603,-93.48805,1.585)); +#181551 = VECTOR('',#181552,1.); +#181552 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#181553 = ORIENTED_EDGE('',*,*,#181554,.T.); +#181554 = EDGE_CURVE('',#181547,#181555,#181557,.T.); +#181555 = VERTEX_POINT('',#181556); +#181556 = CARTESIAN_POINT('',(141.992303,-93.329648,1.585)); +#181557 = CIRCLE('',#181558,7.50001266804E-02); +#181558 = AXIS2_PLACEMENT_3D('',#181559,#181560,#181561); +#181559 = CARTESIAN_POINT('',(141.93926905199,-93.38268024831,1.585)); +#181560 = DIRECTION('',(0.,0.,-1.)); +#181561 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#181562 = ORIENTED_EDGE('',*,*,#181563,.T.); +#181563 = EDGE_CURVE('',#181555,#181564,#181566,.T.); +#181564 = VERTEX_POINT('',#181565); +#181565 = CARTESIAN_POINT('',(142.031315,-93.368661,1.585)); +#181566 = LINE('',#181567,#181568); +#181567 = CARTESIAN_POINT('',(141.992303,-93.329648,1.585)); +#181568 = VECTOR('',#181569,1.); +#181569 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#181570 = ORIENTED_EDGE('',*,*,#181571,.T.); +#181571 = EDGE_CURVE('',#181564,#181572,#181574,.T.); +#181572 = VERTEX_POINT('',#181573); +#181573 = CARTESIAN_POINT('',(142.41865,-93.368661,1.585)); +#181574 = CIRCLE('',#181575,0.358502380266); +#181575 = AXIS2_PLACEMENT_3D('',#181576,#181577,#181578); +#181576 = CARTESIAN_POINT('',(142.2249825,-93.066971,1.585)); +#181577 = DIRECTION('',(0.,0.,1.)); +#181578 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#181579 = ORIENTED_EDGE('',*,*,#181580,.T.); +#181580 = EDGE_CURVE('',#181572,#181581,#181583,.T.); +#181581 = VERTEX_POINT('',#181582); +#181582 = CARTESIAN_POINT('',(142.449057,-93.338253,1.585)); +#181583 = LINE('',#181584,#181585); +#181584 = CARTESIAN_POINT('',(142.41865,-93.368661,1.585)); +#181585 = VECTOR('',#181586,1.); +#181586 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#181587 = ORIENTED_EDGE('',*,*,#181588,.T.); +#181588 = EDGE_CURVE('',#181581,#181589,#181591,.T.); +#181589 = VERTEX_POINT('',#181590); +#181590 = CARTESIAN_POINT('',(142.449058,-92.998536,1.585)); +#181591 = CIRCLE('',#181592,0.305616146029); +#181592 = AXIS2_PLACEMENT_3D('',#181593,#181594,#181595); +#181593 = CARTESIAN_POINT('',(142.19499192049,-93.16839375212,1.585)); +#181594 = DIRECTION('',(0.,-0.,1.)); +#181595 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#181596 = ORIENTED_EDGE('',*,*,#181597,.T.); +#181597 = EDGE_CURVE('',#181589,#181598,#181600,.T.); +#181598 = VERTEX_POINT('',#181599); +#181599 = CARTESIAN_POINT('',(142.418651,-92.968129,1.585)); +#181600 = LINE('',#181601,#181602); +#181601 = CARTESIAN_POINT('',(142.449058,-92.998536,1.585)); +#181602 = VECTOR('',#181603,1.); +#181603 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#181604 = ORIENTED_EDGE('',*,*,#181605,.T.); +#181605 = EDGE_CURVE('',#181598,#181606,#181608,.T.); +#181606 = VERTEX_POINT('',#181607); +#181607 = CARTESIAN_POINT('',(142.350135,-92.933871,1.585)); +#181608 = LINE('',#181609,#181610); +#181609 = CARTESIAN_POINT('',(142.418651,-92.968129,1.585)); +#181610 = VECTOR('',#181611,1.); +#181611 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#181612 = ORIENTED_EDGE('',*,*,#181613,.T.); +#181613 = EDGE_CURVE('',#181606,#181614,#181616,.T.); +#181614 = VERTEX_POINT('',#181615); +#181615 = CARTESIAN_POINT('',(142.210351,-92.93243,1.585)); +#181616 = LINE('',#181617,#181618); +#181617 = CARTESIAN_POINT('',(142.350135,-92.933871,1.585)); +#181618 = VECTOR('',#181619,1.); +#181619 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#181620 = ORIENTED_EDGE('',*,*,#181621,.T.); +#181621 = EDGE_CURVE('',#181614,#181622,#181624,.T.); +#181622 = VERTEX_POINT('',#181623); +#181623 = CARTESIAN_POINT('',(142.16854,-92.809483,1.585)); +#181624 = CIRCLE('',#181625,7.500015628756E-02); +#181625 = AXIS2_PLACEMENT_3D('',#181626,#181627,#181628); +#181626 = CARTESIAN_POINT('',(142.22498328432,-92.8588710461,1.585)); +#181627 = DIRECTION('',(0.,0.,-1.)); +#181628 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#181629 = ORIENTED_EDGE('',*,*,#181630,.T.); +#181630 = EDGE_CURVE('',#181622,#181631,#181633,.T.); +#181631 = VERTEX_POINT('',#181632); +#181632 = CARTESIAN_POINT('',(142.393034,-92.552919,1.585)); +#181633 = LINE('',#181634,#181635); +#181634 = CARTESIAN_POINT('',(142.16854,-92.809483,1.585)); +#181635 = VECTOR('',#181636,1.); +#181636 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#181637 = ORIENTED_EDGE('',*,*,#181638,.T.); +#181638 = EDGE_CURVE('',#181631,#181461,#181639,.T.); +#181639 = LINE('',#181640,#181641); +#181640 = CARTESIAN_POINT('',(142.393034,-92.552919,1.585)); +#181641 = VECTOR('',#181642,1.); +#181642 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#181643 = PLANE('',#181644); +#181644 = AXIS2_PLACEMENT_3D('',#181645,#181646,#181647); +#181645 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181646 = DIRECTION('',(0.,0.,1.)); +#181647 = DIRECTION('',(1.,0.,-0.)); +#181648 = SHELL_BASED_SURFACE_MODEL('',(#181649)); +#181649 = OPEN_SHELL('',(#181650)); +#181650 = ADVANCED_FACE('',(#181651),#181794,.T.); +#181651 = FACE_BOUND('',#181652,.F.); +#181652 = EDGE_LOOP('',(#181653,#181664,#181672,#181680,#181689,#181697, + #181705,#181714,#181722,#181731,#181739,#181747,#181755,#181764, + #181772,#181780,#181788)); +#181653 = ORIENTED_EDGE('',*,*,#181654,.T.); +#181654 = EDGE_CURVE('',#181655,#181657,#181659,.T.); +#181655 = VERTEX_POINT('',#181656); +#181656 = CARTESIAN_POINT('',(186.075954,-92.191162,1.585)); +#181657 = VERTEX_POINT('',#181658); +#181658 = CARTESIAN_POINT('',(186.244953,-92.261164,1.585)); +#181659 = CIRCLE('',#181660,0.109999394362); +#181660 = AXIS2_PLACEMENT_3D('',#181661,#181662,#181663); +#181661 = CARTESIAN_POINT('',(186.137067,-92.28262274562,1.585)); +#181662 = DIRECTION('',(0.,0.,-1.)); +#181663 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#181664 = ORIENTED_EDGE('',*,*,#181665,.T.); +#181665 = EDGE_CURVE('',#181657,#181666,#181668,.T.); +#181666 = VERTEX_POINT('',#181667); +#181667 = CARTESIAN_POINT('',(186.247067,-92.401196,1.585)); +#181668 = LINE('',#181669,#181670); +#181669 = CARTESIAN_POINT('',(186.244953,-92.261164,1.585)); +#181670 = VECTOR('',#181671,1.); +#181671 = DIRECTION('',(1.509482935838E-02,-0.999886066573,0.)); +#181672 = ORIENTED_EDGE('',*,*,#181673,.T.); +#181673 = EDGE_CURVE('',#181666,#181674,#181676,.T.); +#181674 = VERTEX_POINT('',#181675); +#181675 = CARTESIAN_POINT('',(186.69186,-92.40331,1.585)); +#181676 = LINE('',#181677,#181678); +#181677 = CARTESIAN_POINT('',(186.247067,-92.401196,1.585)); +#181678 = VECTOR('',#181679,1.); +#181679 = DIRECTION('',(0.999988705767,-4.752718959153E-03,0.)); +#181680 = ORIENTED_EDGE('',*,*,#181681,.T.); +#181681 = EDGE_CURVE('',#181674,#181682,#181684,.T.); +#181682 = VERTEX_POINT('',#181683); +#181683 = CARTESIAN_POINT('',(186.69186,-92.619082,1.585)); +#181684 = CIRCLE('',#181685,0.109999639072); +#181685 = AXIS2_PLACEMENT_3D('',#181686,#181687,#181688); +#181686 = CARTESIAN_POINT('',(186.6704,-92.511196,1.585)); +#181687 = DIRECTION('',(0.,0.,-1.)); +#181688 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#181689 = ORIENTED_EDGE('',*,*,#181690,.T.); +#181690 = EDGE_CURVE('',#181682,#181691,#181693,.T.); +#181691 = VERTEX_POINT('',#181692); +#181692 = CARTESIAN_POINT('',(186.247067,-92.621196,1.585)); +#181693 = LINE('',#181694,#181695); +#181694 = CARTESIAN_POINT('',(186.69186,-92.619082,1.585)); +#181695 = VECTOR('',#181696,1.); +#181696 = DIRECTION('',(-0.999988705767,-4.752718959121E-03,0.)); +#181697 = ORIENTED_EDGE('',*,*,#181698,.T.); +#181698 = EDGE_CURVE('',#181691,#181699,#181701,.T.); +#181699 = VERTEX_POINT('',#181700); +#181700 = CARTESIAN_POINT('',(186.244953,-93.294561,1.585)); +#181701 = LINE('',#181702,#181703); +#181702 = CARTESIAN_POINT('',(186.247067,-92.621196,1.585)); +#181703 = VECTOR('',#181704,1.); +#181704 = DIRECTION('',(-3.139440841247E-03,-0.999995071943,0.)); +#181705 = ORIENTED_EDGE('',*,*,#181706,.T.); +#181706 = EDGE_CURVE('',#181699,#181707,#181709,.T.); +#181707 = VERTEX_POINT('',#181708); +#181708 = CARTESIAN_POINT('',(186.112923,-93.379875,1.585)); +#181709 = CIRCLE('',#181710,0.109137188848); +#181710 = AXIS2_PLACEMENT_3D('',#181711,#181712,#181713); +#181711 = CARTESIAN_POINT('',(186.1378434959,-93.27362108302,1.585)); +#181712 = DIRECTION('',(0.,0.,-1.)); +#181713 = DIRECTION('',(0.981420771612,-0.191867842664,0.)); +#181714 = ORIENTED_EDGE('',*,*,#181715,.T.); +#181715 = EDGE_CURVE('',#181707,#181716,#181718,.T.); +#181716 = VERTEX_POINT('',#181717); +#181717 = CARTESIAN_POINT('',(184.939735,-92.987711,1.585)); +#181718 = LINE('',#181719,#181720); +#181719 = CARTESIAN_POINT('',(186.112923,-93.379875,1.585)); +#181720 = VECTOR('',#181721,1.); +#181721 = DIRECTION('',(-0.948415861279,0.317028948321,0.)); +#181722 = ORIENTED_EDGE('',*,*,#181723,.T.); +#181723 = EDGE_CURVE('',#181716,#181724,#181726,.T.); +#181724 = VERTEX_POINT('',#181725); +#181725 = CARTESIAN_POINT('',(185.007968,-92.783012,1.585)); +#181726 = CIRCLE('',#181727,0.109999365974); +#181727 = AXIS2_PLACEMENT_3D('',#181728,#181729,#181730); +#181728 = CARTESIAN_POINT('',(184.99420965101,-92.89214755034,1.585)); +#181729 = DIRECTION('',(0.,0.,-1.)); +#181730 = DIRECTION('',(-0.495226954596,-0.868763640723,-0.)); +#181731 = ORIENTED_EDGE('',*,*,#181732,.T.); +#181732 = EDGE_CURVE('',#181724,#181733,#181735,.T.); +#181733 = VERTEX_POINT('',#181734); +#181734 = CARTESIAN_POINT('',(186.027067,-93.120484,1.585)); +#181735 = LINE('',#181736,#181737); +#181736 = CARTESIAN_POINT('',(185.007968,-92.783012,1.585)); +#181737 = VECTOR('',#181738,1.); +#181738 = DIRECTION('',(0.94930398992,-0.314359562797,0.)); +#181739 = ORIENTED_EDGE('',*,*,#181740,.T.); +#181740 = EDGE_CURVE('',#181733,#181741,#181743,.T.); +#181741 = VERTEX_POINT('',#181742); +#181742 = CARTESIAN_POINT('',(186.027067,-92.621196,1.585)); +#181743 = LINE('',#181744,#181745); +#181744 = CARTESIAN_POINT('',(186.027067,-93.120484,1.585)); +#181745 = VECTOR('',#181746,1.); +#181746 = DIRECTION('',(0.,1.,0.)); +#181747 = ORIENTED_EDGE('',*,*,#181748,.T.); +#181748 = EDGE_CURVE('',#181741,#181749,#181751,.T.); +#181749 = VERTEX_POINT('',#181750); +#181750 = CARTESIAN_POINT('',(185.582273,-92.619082,1.585)); +#181751 = LINE('',#181752,#181753); +#181752 = CARTESIAN_POINT('',(186.027067,-92.621196,1.585)); +#181753 = VECTOR('',#181754,1.); +#181754 = DIRECTION('',(-0.999988705818,4.752708274148E-03,0.)); +#181755 = ORIENTED_EDGE('',*,*,#181756,.T.); +#181756 = EDGE_CURVE('',#181749,#181757,#181759,.T.); +#181757 = VERTEX_POINT('',#181758); +#181758 = CARTESIAN_POINT('',(185.582273,-92.40331,1.585)); +#181759 = CIRCLE('',#181760,0.109999639072); +#181760 = AXIS2_PLACEMENT_3D('',#181761,#181762,#181763); +#181761 = CARTESIAN_POINT('',(185.603733,-92.511196,1.585)); +#181762 = DIRECTION('',(0.,0.,-1.)); +#181763 = DIRECTION('',(-0.195091549218,-0.980785036297,-0.)); +#181764 = ORIENTED_EDGE('',*,*,#181765,.T.); +#181765 = EDGE_CURVE('',#181757,#181766,#181768,.T.); +#181766 = VERTEX_POINT('',#181767); +#181767 = CARTESIAN_POINT('',(186.027067,-92.401196,1.585)); +#181768 = LINE('',#181769,#181770); +#181769 = CARTESIAN_POINT('',(185.582273,-92.40331,1.585)); +#181770 = VECTOR('',#181771,1.); +#181771 = DIRECTION('',(0.999988705818,4.75270827418E-03,0.)); +#181772 = ORIENTED_EDGE('',*,*,#181773,.T.); +#181773 = EDGE_CURVE('',#181766,#181774,#181776,.T.); +#181774 = VERTEX_POINT('',#181775); +#181775 = CARTESIAN_POINT('',(186.029181,-92.261164,1.585)); +#181776 = LINE('',#181777,#181778); +#181777 = CARTESIAN_POINT('',(186.027067,-92.401196,1.585)); +#181778 = VECTOR('',#181779,1.); +#181779 = DIRECTION('',(1.509482935858E-02,0.999886066573,0.)); +#181780 = ORIENTED_EDGE('',*,*,#181781,.T.); +#181781 = EDGE_CURVE('',#181774,#181782,#181784,.T.); +#181782 = VERTEX_POINT('',#181783); +#181783 = CARTESIAN_POINT('',(186.045605,-92.221511,1.585)); +#181784 = LINE('',#181785,#181786); +#181785 = CARTESIAN_POINT('',(186.029181,-92.261164,1.585)); +#181786 = VECTOR('',#181787,1.); +#181787 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#181788 = ORIENTED_EDGE('',*,*,#181789,.T.); +#181789 = EDGE_CURVE('',#181782,#181655,#181790,.T.); +#181790 = LINE('',#181791,#181792); +#181791 = CARTESIAN_POINT('',(186.045605,-92.221511,1.585)); +#181792 = VECTOR('',#181793,1.); +#181793 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#181794 = PLANE('',#181795); +#181795 = AXIS2_PLACEMENT_3D('',#181796,#181797,#181798); +#181796 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181797 = DIRECTION('',(0.,0.,1.)); +#181798 = DIRECTION('',(1.,0.,-0.)); +#181799 = SHELL_BASED_SURFACE_MODEL('',(#181800)); +#181800 = OPEN_SHELL('',(#181801)); +#181801 = ADVANCED_FACE('',(#181802,#181903),#181986,.T.); +#181802 = FACE_BOUND('',#181803,.F.); +#181803 = EDGE_LOOP('',(#181804,#181815,#181823,#181831,#181839,#181848, + #181856,#181864,#181872,#181880,#181888,#181897)); +#181804 = ORIENTED_EDGE('',*,*,#181805,.T.); +#181805 = EDGE_CURVE('',#181806,#181808,#181810,.T.); +#181806 = VERTEX_POINT('',#181807); +#181807 = CARTESIAN_POINT('',(199.870714,-92.359597,1.585)); +#181808 = VERTEX_POINT('',#181809); +#181809 = CARTESIAN_POINT('',(199.935714,-92.294597,1.585)); +#181810 = CIRCLE('',#181811,6.500103935393E-02); +#181811 = AXIS2_PLACEMENT_3D('',#181812,#181813,#181814); +#181812 = CARTESIAN_POINT('',(199.93571503934,-92.35959803934,1.585)); +#181813 = DIRECTION('',(0.,0.,-1.)); +#181814 = DIRECTION('',(-0.999999999872,1.598967714806E-05,0.)); +#181815 = ORIENTED_EDGE('',*,*,#181816,.T.); +#181816 = EDGE_CURVE('',#181808,#181817,#181819,.T.); +#181817 = VERTEX_POINT('',#181818); +#181818 = CARTESIAN_POINT('',(200.160222,-92.29663,1.585)); +#181819 = LINE('',#181820,#181821); +#181820 = CARTESIAN_POINT('',(199.935714,-92.294597,1.585)); +#181821 = VECTOR('',#181822,1.); +#181822 = DIRECTION('',(0.99995900278,-9.05498535753E-03,0.)); +#181823 = ORIENTED_EDGE('',*,*,#181824,.T.); +#181824 = EDGE_CURVE('',#181817,#181825,#181827,.T.); +#181825 = VERTEX_POINT('',#181826); +#181826 = CARTESIAN_POINT('',(200.31211,-92.348191,1.585)); +#181827 = LINE('',#181828,#181829); +#181828 = CARTESIAN_POINT('',(200.160222,-92.29663,1.585)); +#181829 = VECTOR('',#181830,1.); +#181830 = DIRECTION('',(0.946926388211,-0.32145048656,0.)); +#181831 = ORIENTED_EDGE('',*,*,#181832,.T.); +#181832 = EDGE_CURVE('',#181825,#181833,#181835,.T.); +#181833 = VERTEX_POINT('',#181834); +#181834 = CARTESIAN_POINT('',(200.416037,-92.45087,1.585)); +#181835 = LINE('',#181836,#181837); +#181836 = CARTESIAN_POINT('',(200.31211,-92.348191,1.585)); +#181837 = VECTOR('',#181838,1.); +#181838 = DIRECTION('',(0.711365069748,-0.70282269282,0.)); +#181839 = ORIENTED_EDGE('',*,*,#181840,.T.); +#181840 = EDGE_CURVE('',#181833,#181841,#181843,.T.); +#181841 = VERTEX_POINT('',#181842); +#181842 = CARTESIAN_POINT('',(200.513059,-92.889647,1.585)); +#181843 = CIRCLE('',#181844,0.67543082859); +#181844 = AXIS2_PLACEMENT_3D('',#181845,#181846,#181847); +#181845 = CARTESIAN_POINT('',(199.84260778858,-92.80778139475,1.585)); +#181846 = DIRECTION('',(0.,0.,-1.)); +#181847 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#181848 = ORIENTED_EDGE('',*,*,#181849,.T.); +#181849 = EDGE_CURVE('',#181841,#181850,#181852,.T.); +#181850 = VERTEX_POINT('',#181851); +#181851 = CARTESIAN_POINT('',(200.465281,-93.07438,1.585)); +#181852 = LINE('',#181853,#181854); +#181853 = CARTESIAN_POINT('',(200.513059,-92.889647,1.585)); +#181854 = VECTOR('',#181855,1.); +#181855 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#181856 = ORIENTED_EDGE('',*,*,#181857,.T.); +#181857 = EDGE_CURVE('',#181850,#181858,#181860,.T.); +#181858 = VERTEX_POINT('',#181859); +#181859 = CARTESIAN_POINT('',(200.410248,-93.176987,1.585)); +#181860 = LINE('',#181861,#181862); +#181861 = CARTESIAN_POINT('',(200.465281,-93.07438,1.585)); +#181862 = VECTOR('',#181863,1.); +#181863 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#181864 = ORIENTED_EDGE('',*,*,#181865,.T.); +#181865 = EDGE_CURVE('',#181858,#181866,#181868,.T.); +#181866 = VERTEX_POINT('',#181867); +#181867 = CARTESIAN_POINT('',(200.312114,-93.270999,1.585)); +#181868 = LINE('',#181869,#181870); +#181869 = CARTESIAN_POINT('',(200.410248,-93.176987,1.585)); +#181870 = VECTOR('',#181871,1.); +#181871 = DIRECTION('',(-0.722109804107,-0.691778455008,0.)); +#181872 = ORIENTED_EDGE('',*,*,#181873,.T.); +#181873 = EDGE_CURVE('',#181866,#181874,#181876,.T.); +#181874 = VERTEX_POINT('',#181875); +#181875 = CARTESIAN_POINT('',(200.160222,-93.322563,1.585)); +#181876 = LINE('',#181877,#181878); +#181877 = CARTESIAN_POINT('',(200.312114,-93.270999,1.585)); +#181878 = VECTOR('',#181879,1.); +#181879 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#181880 = ORIENTED_EDGE('',*,*,#181881,.T.); +#181881 = EDGE_CURVE('',#181874,#181882,#181884,.T.); +#181882 = VERTEX_POINT('',#181883); +#181883 = CARTESIAN_POINT('',(199.935714,-93.324597,1.585)); +#181884 = LINE('',#181885,#181886); +#181885 = CARTESIAN_POINT('',(200.160222,-93.322563,1.585)); +#181886 = VECTOR('',#181887,1.); +#181887 = DIRECTION('',(-0.999958962441,-9.059438993705E-03,0.)); +#181888 = ORIENTED_EDGE('',*,*,#181889,.T.); +#181889 = EDGE_CURVE('',#181882,#181890,#181892,.T.); +#181890 = VERTEX_POINT('',#181891); +#181891 = CARTESIAN_POINT('',(199.870714,-93.259597,1.585)); +#181892 = CIRCLE('',#181893,6.500103935388E-02); +#181893 = AXIS2_PLACEMENT_3D('',#181894,#181895,#181896); +#181894 = CARTESIAN_POINT('',(199.93571503934,-93.25959596065,1.585)); +#181895 = DIRECTION('',(0.,0.,-1.)); +#181896 = DIRECTION('',(-1.59896764922E-05,-0.999999999872,-0.)); +#181897 = ORIENTED_EDGE('',*,*,#181898,.T.); +#181898 = EDGE_CURVE('',#181890,#181806,#181899,.T.); +#181899 = LINE('',#181900,#181901); +#181900 = CARTESIAN_POINT('',(199.870714,-93.259597,1.585)); +#181901 = VECTOR('',#181902,1.); +#181902 = DIRECTION('',(0.,1.,0.)); +#181903 = FACE_BOUND('',#181904,.F.); +#181904 = EDGE_LOOP('',(#181905,#181915,#181923,#181931,#181939,#181947, + #181955,#181964,#181972,#181980)); +#181905 = ORIENTED_EDGE('',*,*,#181906,.T.); +#181906 = EDGE_CURVE('',#181907,#181909,#181911,.T.); +#181907 = VERTEX_POINT('',#181908); +#181908 = CARTESIAN_POINT('',(200.243458,-92.459265,1.585)); +#181909 = VERTEX_POINT('',#181910); +#181910 = CARTESIAN_POINT('',(200.139453,-92.424597,1.585)); +#181911 = LINE('',#181912,#181913); +#181912 = CARTESIAN_POINT('',(200.243458,-92.459265,1.585)); +#181913 = VECTOR('',#181914,1.); +#181914 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#181915 = ORIENTED_EDGE('',*,*,#181916,.T.); +#181916 = EDGE_CURVE('',#181909,#181917,#181919,.T.); +#181917 = VERTEX_POINT('',#181918); +#181918 = CARTESIAN_POINT('',(200.000714,-92.424597,1.585)); +#181919 = LINE('',#181920,#181921); +#181920 = CARTESIAN_POINT('',(200.139453,-92.424597,1.585)); +#181921 = VECTOR('',#181922,1.); +#181922 = DIRECTION('',(-1.,0.,0.)); +#181923 = ORIENTED_EDGE('',*,*,#181924,.T.); +#181924 = EDGE_CURVE('',#181917,#181925,#181927,.T.); +#181925 = VERTEX_POINT('',#181926); +#181926 = CARTESIAN_POINT('',(200.000714,-93.194597,1.585)); +#181927 = LINE('',#181928,#181929); +#181928 = CARTESIAN_POINT('',(200.000714,-92.424597,1.585)); +#181929 = VECTOR('',#181930,1.); +#181930 = DIRECTION('',(0.,-1.,0.)); +#181931 = ORIENTED_EDGE('',*,*,#181932,.T.); +#181932 = EDGE_CURVE('',#181925,#181933,#181935,.T.); +#181933 = VERTEX_POINT('',#181934); +#181934 = CARTESIAN_POINT('',(200.139453,-93.194597,1.585)); +#181935 = LINE('',#181936,#181937); +#181936 = CARTESIAN_POINT('',(200.000714,-93.194597,1.585)); +#181937 = VECTOR('',#181938,1.); +#181938 = DIRECTION('',(1.,0.,0.)); +#181939 = ORIENTED_EDGE('',*,*,#181940,.T.); +#181940 = EDGE_CURVE('',#181933,#181941,#181943,.T.); +#181941 = VERTEX_POINT('',#181942); +#181942 = CARTESIAN_POINT('',(200.243458,-93.159928,1.585)); +#181943 = LINE('',#181944,#181945); +#181944 = CARTESIAN_POINT('',(200.139453,-93.194597,1.585)); +#181945 = VECTOR('',#181946,1.); +#181946 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#181947 = ORIENTED_EDGE('',*,*,#181948,.T.); +#181948 = EDGE_CURVE('',#181941,#181949,#181951,.T.); +#181949 = VERTEX_POINT('',#181950); +#181950 = CARTESIAN_POINT('',(200.310865,-93.092522,1.585)); +#181951 = LINE('',#181952,#181953); +#181952 = CARTESIAN_POINT('',(200.243458,-93.159928,1.585)); +#181953 = VECTOR('',#181954,1.); +#181954 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#181955 = ORIENTED_EDGE('',*,*,#181956,.T.); +#181956 = EDGE_CURVE('',#181949,#181957,#181959,.T.); +#181957 = VERTEX_POINT('',#181958); +#181958 = CARTESIAN_POINT('',(200.385,-92.753311,1.585)); +#181959 = CIRCLE('',#181960,0.553325470753); +#181960 = AXIS2_PLACEMENT_3D('',#181961,#181962,#181963); +#181961 = CARTESIAN_POINT('',(199.83466292366,-92.81074077444,1.585)); +#181962 = DIRECTION('',(0.,0.,1.)); +#181963 = DIRECTION('',(0.860618390997,-0.509250414901,0.)); +#181964 = ORIENTED_EDGE('',*,*,#181965,.T.); +#181965 = EDGE_CURVE('',#181957,#181966,#181968,.T.); +#181966 = VERTEX_POINT('',#181967); +#181967 = CARTESIAN_POINT('',(200.345814,-92.59657,1.585)); +#181968 = LINE('',#181969,#181970); +#181969 = CARTESIAN_POINT('',(200.385,-92.753311,1.585)); +#181970 = VECTOR('',#181971,1.); +#181971 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#181972 = ORIENTED_EDGE('',*,*,#181973,.T.); +#181973 = EDGE_CURVE('',#181966,#181974,#181976,.T.); +#181974 = VERTEX_POINT('',#181975); +#181975 = CARTESIAN_POINT('',(200.310864,-92.526669,1.585)); +#181976 = LINE('',#181977,#181978); +#181977 = CARTESIAN_POINT('',(200.345814,-92.59657,1.585)); +#181978 = VECTOR('',#181979,1.); +#181979 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#181980 = ORIENTED_EDGE('',*,*,#181981,.T.); +#181981 = EDGE_CURVE('',#181974,#181907,#181982,.T.); +#181982 = LINE('',#181983,#181984); +#181983 = CARTESIAN_POINT('',(200.310864,-92.526669,1.585)); +#181984 = VECTOR('',#181985,1.); +#181985 = DIRECTION('',(-0.707117271529,0.707096290688,0.)); +#181986 = PLANE('',#181987); +#181987 = AXIS2_PLACEMENT_3D('',#181988,#181989,#181990); +#181988 = CARTESIAN_POINT('',(0.,0.,1.585)); +#181989 = DIRECTION('',(0.,0.,1.)); +#181990 = DIRECTION('',(1.,0.,-0.)); +#181991 = SHELL_BASED_SURFACE_MODEL('',(#181992)); +#181992 = OPEN_SHELL('',(#181993)); +#181993 = ADVANCED_FACE('',(#181994),#182112,.T.); +#181994 = FACE_BOUND('',#181995,.F.); +#181995 = EDGE_LOOP('',(#181996,#182007,#182015,#182023,#182031,#182039, + #182047,#182055,#182064,#182072,#182081,#182089,#182097,#182106)); +#181996 = ORIENTED_EDGE('',*,*,#181997,.T.); +#181997 = EDGE_CURVE('',#181998,#182000,#182002,.T.); +#181998 = VERTEX_POINT('',#181999); +#181999 = CARTESIAN_POINT('',(198.927857,-92.359597,1.585)); +#182000 = VERTEX_POINT('',#182001); +#182001 = CARTESIAN_POINT('',(198.98466,-92.295116,1.585)); +#182002 = CIRCLE('',#182003,6.499996854975E-02); +#182003 = AXIS2_PLACEMENT_3D('',#182004,#182005,#182006); +#182004 = CARTESIAN_POINT('',(198.99285696855,-92.35959704851,1.585)); +#182005 = DIRECTION('',(0.,0.,-1.)); +#182006 = DIRECTION('',(-1.,7.464412463361E-07,0.)); +#182007 = ORIENTED_EDGE('',*,*,#182008,.T.); +#182008 = EDGE_CURVE('',#182000,#182009,#182011,.T.); +#182009 = VERTEX_POINT('',#182010); +#182010 = CARTESIAN_POINT('',(199.000899,-92.299545,1.585)); +#182011 = LINE('',#182012,#182013); +#182012 = CARTESIAN_POINT('',(198.98466,-92.295116,1.585)); +#182013 = VECTOR('',#182014,1.); +#182014 = DIRECTION('',(0.964761079179,-0.263127459799,0.)); +#182015 = ORIENTED_EDGE('',*,*,#182016,.T.); +#182016 = EDGE_CURVE('',#182009,#182017,#182019,.T.); +#182017 = VERTEX_POINT('',#182018); +#182018 = CARTESIAN_POINT('',(199.017731,-92.299545,1.585)); +#182019 = LINE('',#182020,#182021); +#182020 = CARTESIAN_POINT('',(199.000899,-92.299545,1.585)); +#182021 = VECTOR('',#182022,1.); +#182022 = DIRECTION('',(1.,0.,0.)); +#182023 = ORIENTED_EDGE('',*,*,#182024,.T.); +#182024 = EDGE_CURVE('',#182017,#182025,#182027,.T.); +#182025 = VERTEX_POINT('',#182026); +#182026 = CARTESIAN_POINT('',(199.032656,-92.308206,1.585)); +#182027 = LINE('',#182028,#182029); +#182028 = CARTESIAN_POINT('',(199.017731,-92.299545,1.585)); +#182029 = VECTOR('',#182030,1.); +#182030 = DIRECTION('',(0.864917988571,-0.501913212664,0.)); +#182031 = ORIENTED_EDGE('',*,*,#182032,.T.); +#182032 = EDGE_CURVE('',#182025,#182033,#182035,.T.); +#182033 = VERTEX_POINT('',#182034); +#182034 = CARTESIAN_POINT('',(199.049293,-92.327348,1.585)); +#182035 = LINE('',#182036,#182037); +#182036 = CARTESIAN_POINT('',(199.032656,-92.308206,1.585)); +#182037 = VECTOR('',#182038,1.); +#182038 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#182039 = ORIENTED_EDGE('',*,*,#182040,.T.); +#182040 = EDGE_CURVE('',#182033,#182041,#182043,.T.); +#182041 = VERTEX_POINT('',#182042); +#182042 = CARTESIAN_POINT('',(199.442143,-93.014835,1.585)); +#182043 = LINE('',#182044,#182045); +#182044 = CARTESIAN_POINT('',(199.049293,-92.327348,1.585)); +#182045 = VECTOR('',#182046,1.); +#182046 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#182047 = ORIENTED_EDGE('',*,*,#182048,.T.); +#182048 = EDGE_CURVE('',#182041,#182049,#182051,.T.); +#182049 = VERTEX_POINT('',#182050); +#182050 = CARTESIAN_POINT('',(199.442143,-92.359597,1.585)); +#182051 = LINE('',#182052,#182053); +#182052 = CARTESIAN_POINT('',(199.442143,-93.014835,1.585)); +#182053 = VECTOR('',#182054,1.); +#182054 = DIRECTION('',(0.,1.,0.)); +#182055 = ORIENTED_EDGE('',*,*,#182056,.T.); +#182056 = EDGE_CURVE('',#182049,#182057,#182059,.T.); +#182057 = VERTEX_POINT('',#182058); +#182058 = CARTESIAN_POINT('',(199.572143,-92.359597,1.585)); +#182059 = CIRCLE('',#182060,6.500000000093E-02); +#182060 = AXIS2_PLACEMENT_3D('',#182061,#182062,#182063); +#182061 = CARTESIAN_POINT('',(199.507143,-92.35959734486,1.585)); +#182062 = DIRECTION('',(0.,0.,-1.)); +#182063 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#182064 = ORIENTED_EDGE('',*,*,#182065,.T.); +#182065 = EDGE_CURVE('',#182057,#182066,#182068,.T.); +#182066 = VERTEX_POINT('',#182067); +#182067 = CARTESIAN_POINT('',(199.572143,-93.259597,1.585)); +#182068 = LINE('',#182069,#182070); +#182069 = CARTESIAN_POINT('',(199.572143,-92.359597,1.585)); +#182070 = VECTOR('',#182071,1.); +#182071 = DIRECTION('',(0.,-1.,0.)); +#182072 = ORIENTED_EDGE('',*,*,#182073,.T.); +#182073 = EDGE_CURVE('',#182066,#182074,#182076,.T.); +#182074 = VERTEX_POINT('',#182075); +#182075 = CARTESIAN_POINT('',(199.450707,-93.291846,1.585)); +#182076 = CIRCLE('',#182077,6.500021194143E-02); +#182077 = AXIS2_PLACEMENT_3D('',#182078,#182079,#182080); +#182078 = CARTESIAN_POINT('',(199.50714278806,-93.25959651351,1.585)); +#182079 = DIRECTION('',(-0.,0.,-1.)); +#182080 = DIRECTION('',(0.999999999972,-7.484332334086E-06,-0.)); +#182081 = ORIENTED_EDGE('',*,*,#182082,.T.); +#182082 = EDGE_CURVE('',#182074,#182083,#182085,.T.); +#182083 = VERTEX_POINT('',#182084); +#182084 = CARTESIAN_POINT('',(199.057857,-92.604358,1.585)); +#182085 = LINE('',#182086,#182087); +#182086 = CARTESIAN_POINT('',(199.450707,-93.291846,1.585)); +#182087 = VECTOR('',#182088,1.); +#182088 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#182089 = ORIENTED_EDGE('',*,*,#182090,.T.); +#182090 = EDGE_CURVE('',#182083,#182091,#182093,.T.); +#182091 = VERTEX_POINT('',#182092); +#182092 = CARTESIAN_POINT('',(199.057857,-93.259597,1.585)); +#182093 = LINE('',#182094,#182095); +#182094 = CARTESIAN_POINT('',(199.057857,-92.604358,1.585)); +#182095 = VECTOR('',#182096,1.); +#182096 = DIRECTION('',(0.,-1.,0.)); +#182097 = ORIENTED_EDGE('',*,*,#182098,.T.); +#182098 = EDGE_CURVE('',#182091,#182099,#182101,.T.); +#182099 = VERTEX_POINT('',#182100); +#182100 = CARTESIAN_POINT('',(198.927857,-93.259597,1.585)); +#182101 = CIRCLE('',#182102,6.500000000093E-02); +#182102 = AXIS2_PLACEMENT_3D('',#182103,#182104,#182105); +#182103 = CARTESIAN_POINT('',(198.992857,-93.25959665513,1.585)); +#182104 = DIRECTION('',(-0.,0.,-1.)); +#182105 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#182106 = ORIENTED_EDGE('',*,*,#182107,.T.); +#182107 = EDGE_CURVE('',#182099,#181998,#182108,.T.); +#182108 = LINE('',#182109,#182110); +#182109 = CARTESIAN_POINT('',(198.927857,-93.259597,1.585)); +#182110 = VECTOR('',#182111,1.); +#182111 = DIRECTION('',(0.,1.,0.)); +#182112 = PLANE('',#182113); +#182113 = AXIS2_PLACEMENT_3D('',#182114,#182115,#182116); +#182114 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182115 = DIRECTION('',(0.,0.,1.)); +#182116 = DIRECTION('',(1.,0.,-0.)); +#182117 = SHELL_BASED_SURFACE_MODEL('',(#182118)); +#182118 = OPEN_SHELL('',(#182119)); +#182119 = ADVANCED_FACE('',(#182120),#182370,.T.); +#182120 = FACE_BOUND('',#182121,.F.); +#182121 = EDGE_LOOP('',(#182122,#182132,#182140,#182149,#182157,#182166, + #182174,#182182,#182190,#182198,#182207,#182215,#182223,#182231, + #182240,#182248,#182256,#182264,#182273,#182281,#182290,#182298, + #182306,#182314,#182322,#182331,#182339,#182348,#182356,#182364)); +#182122 = ORIENTED_EDGE('',*,*,#182123,.T.); +#182123 = EDGE_CURVE('',#182124,#182126,#182128,.T.); +#182124 = VERTEX_POINT('',#182125); +#182125 = CARTESIAN_POINT('',(198.187892,-92.34819,1.585)); +#182126 = VERTEX_POINT('',#182127); +#182127 = CARTESIAN_POINT('',(198.339777,-92.29663,1.585)); +#182128 = LINE('',#182129,#182130); +#182129 = CARTESIAN_POINT('',(198.187892,-92.34819,1.585)); +#182130 = VECTOR('',#182131,1.); +#182131 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#182132 = ORIENTED_EDGE('',*,*,#182133,.T.); +#182133 = EDGE_CURVE('',#182126,#182134,#182136,.T.); +#182134 = VERTEX_POINT('',#182135); +#182135 = CARTESIAN_POINT('',(198.481765,-92.295232,1.585)); +#182136 = LINE('',#182137,#182138); +#182137 = CARTESIAN_POINT('',(198.339777,-92.29663,1.585)); +#182138 = VECTOR('',#182139,1.); +#182139 = DIRECTION('',(0.999951532626,9.845425265558E-03,0.)); +#182140 = ORIENTED_EDGE('',*,*,#182141,.T.); +#182141 = EDGE_CURVE('',#182134,#182142,#182144,.T.); +#182142 = VERTEX_POINT('',#182143); +#182143 = CARTESIAN_POINT('',(198.61339,-92.359866,1.585)); +#182144 = CIRCLE('',#182145,0.276414597198); +#182145 = AXIS2_PLACEMENT_3D('',#182146,#182147,#182148); +#182146 = CARTESIAN_POINT('',(198.43010572555,-92.56677637741,1.585)); +#182147 = DIRECTION('',(0.,0.,-1.)); +#182148 = DIRECTION('',(0.186890544038,0.982380743169,0.)); +#182149 = ORIENTED_EDGE('',*,*,#182150,.T.); +#182150 = EDGE_CURVE('',#182142,#182151,#182153,.T.); +#182151 = VERTEX_POINT('',#182152); +#182152 = CARTESIAN_POINT('',(198.629122,-92.407062,1.585)); +#182153 = LINE('',#182154,#182155); +#182154 = CARTESIAN_POINT('',(198.61339,-92.359866,1.585)); +#182155 = VECTOR('',#182156,1.); +#182156 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#182157 = ORIENTED_EDGE('',*,*,#182158,.T.); +#182158 = EDGE_CURVE('',#182151,#182159,#182161,.T.); +#182159 = VERTEX_POINT('',#182160); +#182160 = CARTESIAN_POINT('',(198.535217,-92.460592,1.585)); +#182161 = CIRCLE('',#182162,6.500026004257E-02); +#182162 = AXIS2_PLACEMENT_3D('',#182163,#182164,#182165); +#182163 = CARTESIAN_POINT('',(198.56428530559,-92.40245365279,1.585)); +#182164 = DIRECTION('',(0.,0.,-1.)); +#182165 = DIRECTION('',(0.997483615677,-7.089736565004E-02,0.)); +#182166 = ORIENTED_EDGE('',*,*,#182167,.T.); +#182167 = EDGE_CURVE('',#182159,#182168,#182170,.T.); +#182168 = VERTEX_POINT('',#182169); +#182169 = CARTESIAN_POINT('',(198.463227,-92.424597,1.585)); +#182170 = LINE('',#182171,#182172); +#182171 = CARTESIAN_POINT('',(198.535217,-92.460592,1.585)); +#182172 = VECTOR('',#182173,1.); +#182173 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#182174 = ORIENTED_EDGE('',*,*,#182175,.T.); +#182175 = EDGE_CURVE('',#182168,#182176,#182178,.T.); +#182176 = VERTEX_POINT('',#182177); +#182177 = CARTESIAN_POINT('',(198.360547,-92.424597,1.585)); +#182178 = LINE('',#182179,#182180); +#182179 = CARTESIAN_POINT('',(198.463227,-92.424597,1.585)); +#182180 = VECTOR('',#182181,1.); +#182181 = DIRECTION('',(-1.,0.,0.)); +#182182 = ORIENTED_EDGE('',*,*,#182183,.T.); +#182183 = EDGE_CURVE('',#182176,#182184,#182186,.T.); +#182184 = VERTEX_POINT('',#182185); +#182185 = CARTESIAN_POINT('',(198.256541,-92.459265,1.585)); +#182186 = LINE('',#182187,#182188); +#182187 = CARTESIAN_POINT('',(198.360547,-92.424597,1.585)); +#182188 = VECTOR('',#182189,1.); +#182189 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#182190 = ORIENTED_EDGE('',*,*,#182191,.T.); +#182191 = EDGE_CURVE('',#182184,#182192,#182194,.T.); +#182192 = VERTEX_POINT('',#182193); +#182193 = CARTESIAN_POINT('',(198.189134,-92.526671,1.585)); +#182194 = LINE('',#182195,#182196); +#182195 = CARTESIAN_POINT('',(198.256541,-92.459265,1.585)); +#182196 = VECTOR('',#182197,1.); +#182197 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#182198 = ORIENTED_EDGE('',*,*,#182199,.T.); +#182199 = EDGE_CURVE('',#182192,#182200,#182202,.T.); +#182200 = VERTEX_POINT('',#182201); +#182201 = CARTESIAN_POINT('',(198.115,-92.865881,1.585)); +#182202 = CIRCLE('',#182203,0.553307903116); +#182203 = AXIS2_PLACEMENT_3D('',#182204,#182205,#182206); +#182204 = CARTESIAN_POINT('',(198.66531893982,-92.80844668868,1.585)); +#182205 = DIRECTION('',(0.,0.,1.)); +#182206 = DIRECTION('',(-0.860614744786,0.509256576841,0.)); +#182207 = ORIENTED_EDGE('',*,*,#182208,.T.); +#182208 = EDGE_CURVE('',#182200,#182209,#182211,.T.); +#182209 = VERTEX_POINT('',#182210); +#182210 = CARTESIAN_POINT('',(198.154185,-93.022622,1.585)); +#182211 = LINE('',#182212,#182213); +#182212 = CARTESIAN_POINT('',(198.115,-92.865881,1.585)); +#182213 = VECTOR('',#182214,1.); +#182214 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#182215 = ORIENTED_EDGE('',*,*,#182216,.T.); +#182216 = EDGE_CURVE('',#182209,#182217,#182219,.T.); +#182217 = VERTEX_POINT('',#182218); +#182218 = CARTESIAN_POINT('',(198.189135,-93.092522,1.585)); +#182219 = LINE('',#182220,#182221); +#182220 = CARTESIAN_POINT('',(198.154185,-93.022622,1.585)); +#182221 = VECTOR('',#182222,1.); +#182222 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#182223 = ORIENTED_EDGE('',*,*,#182224,.T.); +#182224 = EDGE_CURVE('',#182217,#182225,#182227,.T.); +#182225 = VERTEX_POINT('',#182226); +#182226 = CARTESIAN_POINT('',(198.256541,-93.159928,1.585)); +#182227 = LINE('',#182228,#182229); +#182228 = CARTESIAN_POINT('',(198.189135,-93.092522,1.585)); +#182229 = VECTOR('',#182230,1.); +#182230 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#182231 = ORIENTED_EDGE('',*,*,#182232,.T.); +#182232 = EDGE_CURVE('',#182225,#182233,#182235,.T.); +#182233 = VERTEX_POINT('',#182234); +#182234 = CARTESIAN_POINT('',(198.529175,-93.159927,1.585)); +#182235 = CIRCLE('',#182236,0.272195913582); +#182236 = AXIS2_PLACEMENT_3D('',#182237,#182238,#182239); +#182237 = CARTESIAN_POINT('',(198.39285713583,-92.92432552445,1.585)); +#182238 = DIRECTION('',(0.,0.,1.)); +#182239 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#182240 = ORIENTED_EDGE('',*,*,#182241,.T.); +#182241 = EDGE_CURVE('',#182233,#182242,#182244,.T.); +#182242 = VERTEX_POINT('',#182243); +#182243 = CARTESIAN_POINT('',(198.542143,-93.146958,1.585)); +#182244 = LINE('',#182245,#182246); +#182245 = CARTESIAN_POINT('',(198.529175,-93.159927,1.585)); +#182246 = VECTOR('',#182247,1.); +#182247 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#182248 = ORIENTED_EDGE('',*,*,#182249,.T.); +#182249 = EDGE_CURVE('',#182242,#182250,#182252,.T.); +#182250 = VERTEX_POINT('',#182251); +#182251 = CARTESIAN_POINT('',(198.542143,-92.938882,1.585)); +#182252 = LINE('',#182253,#182254); +#182253 = CARTESIAN_POINT('',(198.542143,-93.146958,1.585)); +#182254 = VECTOR('',#182255,1.); +#182255 = DIRECTION('',(0.,1.,0.)); +#182256 = ORIENTED_EDGE('',*,*,#182257,.T.); +#182257 = EDGE_CURVE('',#182250,#182258,#182260,.T.); +#182258 = VERTEX_POINT('',#182259); +#182259 = CARTESIAN_POINT('',(198.435714,-92.938882,1.585)); +#182260 = LINE('',#182261,#182262); +#182261 = CARTESIAN_POINT('',(198.542143,-92.938882,1.585)); +#182262 = VECTOR('',#182263,1.); +#182263 = DIRECTION('',(-1.,0.,0.)); +#182264 = ORIENTED_EDGE('',*,*,#182265,.T.); +#182265 = EDGE_CURVE('',#182258,#182266,#182268,.T.); +#182266 = VERTEX_POINT('',#182267); +#182267 = CARTESIAN_POINT('',(198.435714,-92.808882,1.585)); +#182268 = CIRCLE('',#182269,6.500000000092E-02); +#182269 = AXIS2_PLACEMENT_3D('',#182270,#182271,#182272); +#182270 = CARTESIAN_POINT('',(198.43571434486,-92.873882,1.585)); +#182271 = DIRECTION('',(0.,0.,-1.)); +#182272 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#182273 = ORIENTED_EDGE('',*,*,#182274,.T.); +#182274 = EDGE_CURVE('',#182266,#182275,#182277,.T.); +#182275 = VERTEX_POINT('',#182276); +#182276 = CARTESIAN_POINT('',(198.607143,-92.808882,1.585)); +#182277 = LINE('',#182278,#182279); +#182278 = CARTESIAN_POINT('',(198.435714,-92.808882,1.585)); +#182279 = VECTOR('',#182280,1.); +#182280 = DIRECTION('',(1.,0.,0.)); +#182281 = ORIENTED_EDGE('',*,*,#182282,.T.); +#182282 = EDGE_CURVE('',#182275,#182283,#182285,.T.); +#182283 = VERTEX_POINT('',#182284); +#182284 = CARTESIAN_POINT('',(198.672143,-92.873882,1.585)); +#182285 = CIRCLE('',#182286,6.500103935392E-02); +#182286 = AXIS2_PLACEMENT_3D('',#182287,#182288,#182289); +#182287 = CARTESIAN_POINT('',(198.60714196065,-92.87388303934,1.585)); +#182288 = DIRECTION('',(0.,0.,-1.)); +#182289 = DIRECTION('',(1.598967692944E-05,0.999999999872,0.)); +#182290 = ORIENTED_EDGE('',*,*,#182291,.T.); +#182291 = EDGE_CURVE('',#182283,#182292,#182294,.T.); +#182292 = VERTEX_POINT('',#182293); +#182293 = CARTESIAN_POINT('',(198.672143,-93.173882,1.585)); +#182294 = LINE('',#182295,#182296); +#182295 = CARTESIAN_POINT('',(198.672143,-92.873882,1.585)); +#182296 = VECTOR('',#182297,1.); +#182297 = DIRECTION('',(0.,-1.,0.)); +#182298 = ORIENTED_EDGE('',*,*,#182299,.T.); +#182299 = EDGE_CURVE('',#182292,#182300,#182302,.T.); +#182300 = VERTEX_POINT('',#182301); +#182301 = CARTESIAN_POINT('',(198.667195,-93.198756,1.585)); +#182302 = LINE('',#182303,#182304); +#182303 = CARTESIAN_POINT('',(198.672143,-93.173882,1.585)); +#182304 = VECTOR('',#182305,1.); +#182305 = DIRECTION('',(-0.195099947481,-0.98078336573,0.)); +#182306 = ORIENTED_EDGE('',*,*,#182307,.T.); +#182307 = EDGE_CURVE('',#182300,#182308,#182310,.T.); +#182308 = VERTEX_POINT('',#182309); +#182309 = CARTESIAN_POINT('',(198.653106,-93.219843,1.585)); +#182310 = LINE('',#182311,#182312); +#182311 = CARTESIAN_POINT('',(198.667195,-93.198756,1.585)); +#182312 = VECTOR('',#182313,1.); +#182313 = DIRECTION('',(-0.55554616352,-0.831485694524,0.)); +#182314 = ORIENTED_EDGE('',*,*,#182315,.T.); +#182315 = EDGE_CURVE('',#182308,#182316,#182318,.T.); +#182316 = VERTEX_POINT('',#182317); +#182317 = CARTESIAN_POINT('',(198.597819,-93.271005,1.585)); +#182318 = LINE('',#182319,#182320); +#182319 = CARTESIAN_POINT('',(198.653106,-93.219843,1.585)); +#182320 = VECTOR('',#182321,1.); +#182321 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#182322 = ORIENTED_EDGE('',*,*,#182323,.T.); +#182323 = EDGE_CURVE('',#182316,#182324,#182326,.T.); +#182324 = VERTEX_POINT('',#182325); +#182325 = CARTESIAN_POINT('',(198.187885,-93.270999,1.585)); +#182326 = CIRCLE('',#182327,0.409311833232); +#182327 = AXIS2_PLACEMENT_3D('',#182328,#182329,#182330); +#182328 = CARTESIAN_POINT('',(198.39285718563,-92.91670734057,1.585)); +#182329 = DIRECTION('',(-0.,0.,-1.)); +#182330 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#182331 = ORIENTED_EDGE('',*,*,#182332,.T.); +#182332 = EDGE_CURVE('',#182324,#182333,#182335,.T.); +#182333 = VERTEX_POINT('',#182334); +#182334 = CARTESIAN_POINT('',(198.083962,-93.168322,1.585)); +#182335 = LINE('',#182336,#182337); +#182336 = CARTESIAN_POINT('',(198.187885,-93.270999,1.585)); +#182337 = VECTOR('',#182338,1.); +#182338 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#182339 = ORIENTED_EDGE('',*,*,#182340,.T.); +#182340 = EDGE_CURVE('',#182333,#182341,#182343,.T.); +#182341 = VERTEX_POINT('',#182342); +#182342 = CARTESIAN_POINT('',(197.986941,-92.729546,1.585)); +#182343 = CIRCLE('',#182344,0.675436077441); +#182344 = AXIS2_PLACEMENT_3D('',#182345,#182346,#182347); +#182345 = CARTESIAN_POINT('',(198.65739758405,-92.81141091072,1.585)); +#182346 = DIRECTION('',(0.,0.,-1.)); +#182347 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#182348 = ORIENTED_EDGE('',*,*,#182349,.T.); +#182349 = EDGE_CURVE('',#182341,#182350,#182352,.T.); +#182350 = VERTEX_POINT('',#182351); +#182351 = CARTESIAN_POINT('',(198.034719,-92.544813,1.585)); +#182352 = LINE('',#182353,#182354); +#182353 = CARTESIAN_POINT('',(197.986941,-92.729546,1.585)); +#182354 = VECTOR('',#182355,1.); +#182355 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#182356 = ORIENTED_EDGE('',*,*,#182357,.T.); +#182357 = EDGE_CURVE('',#182350,#182358,#182360,.T.); +#182358 = VERTEX_POINT('',#182359); +#182359 = CARTESIAN_POINT('',(198.089752,-92.442206,1.585)); +#182360 = LINE('',#182361,#182362); +#182361 = CARTESIAN_POINT('',(198.034719,-92.544813,1.585)); +#182362 = VECTOR('',#182363,1.); +#182363 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#182364 = ORIENTED_EDGE('',*,*,#182365,.T.); +#182365 = EDGE_CURVE('',#182358,#182124,#182366,.T.); +#182366 = LINE('',#182367,#182368); +#182367 = CARTESIAN_POINT('',(198.089752,-92.442206,1.585)); +#182368 = VECTOR('',#182369,1.); +#182369 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#182370 = PLANE('',#182371); +#182371 = AXIS2_PLACEMENT_3D('',#182372,#182373,#182374); +#182372 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182373 = DIRECTION('',(0.,0.,1.)); +#182374 = DIRECTION('',(1.,0.,-0.)); +#182375 = SHELL_BASED_SURFACE_MODEL('',(#182376)); +#182376 = OPEN_SHELL('',(#182377)); +#182377 = ADVANCED_FACE('',(#182378,#182646),#182713,.T.); +#182378 = FACE_BOUND('',#182379,.F.); +#182379 = EDGE_LOOP('',(#182380,#182390,#182398,#182406,#182414,#182422, + #182430,#182438,#182446,#182454,#182462,#182470,#182478,#182486, + #182494,#182502,#182511,#182519,#182527,#182535,#182543,#182551, + #182559,#182567,#182575,#182583,#182592,#182600,#182608,#182616, + #182624,#182632,#182640)); +#182380 = ORIENTED_EDGE('',*,*,#182381,.T.); +#182381 = EDGE_CURVE('',#182382,#182384,#182386,.T.); +#182382 = VERTEX_POINT('',#182383); +#182383 = CARTESIAN_POINT('',(82.762316,-91.900638,1.585)); +#182384 = VERTEX_POINT('',#182385); +#182385 = CARTESIAN_POINT('',(83.0446,-91.76247,1.585)); +#182386 = LINE('',#182387,#182388); +#182387 = CARTESIAN_POINT('',(82.762316,-91.900638,1.585)); +#182388 = VECTOR('',#182389,1.); +#182389 = DIRECTION('',(0.898180261532,0.439627362427,0.)); +#182390 = ORIENTED_EDGE('',*,*,#182391,.T.); +#182391 = EDGE_CURVE('',#182384,#182392,#182394,.T.); +#182392 = VERTEX_POINT('',#182393); +#182393 = CARTESIAN_POINT('',(83.084219,-91.757144,1.585)); +#182394 = LINE('',#182395,#182396); +#182395 = CARTESIAN_POINT('',(83.0446,-91.76247,1.585)); +#182396 = VECTOR('',#182397,1.); +#182397 = DIRECTION('',(0.991084879219,0.133231986338,0.)); +#182398 = ORIENTED_EDGE('',*,*,#182399,.T.); +#182399 = EDGE_CURVE('',#182392,#182400,#182402,.T.); +#182400 = VERTEX_POINT('',#182401); +#182401 = CARTESIAN_POINT('',(83.361102,-91.760026,1.585)); +#182402 = LINE('',#182403,#182404); +#182403 = CARTESIAN_POINT('',(83.084219,-91.757144,1.585)); +#182404 = VECTOR('',#182405,1.); +#182405 = DIRECTION('',(0.999945833586,-1.040816479305E-02,0.)); +#182406 = ORIENTED_EDGE('',*,*,#182407,.T.); +#182407 = EDGE_CURVE('',#182400,#182408,#182410,.T.); +#182408 = VERTEX_POINT('',#182409); +#182409 = CARTESIAN_POINT('',(83.39892,-91.77298,1.585)); +#182410 = LINE('',#182411,#182412); +#182411 = CARTESIAN_POINT('',(83.361102,-91.760026,1.585)); +#182412 = VECTOR('',#182413,1.); +#182413 = DIRECTION('',(0.946039317712,-0.32405186212,0.)); +#182414 = ORIENTED_EDGE('',*,*,#182415,.T.); +#182415 = EDGE_CURVE('',#182408,#182416,#182418,.T.); +#182416 = VERTEX_POINT('',#182417); +#182417 = CARTESIAN_POINT('',(83.671424,-91.912454,1.585)); +#182418 = LINE('',#182419,#182420); +#182419 = CARTESIAN_POINT('',(83.39892,-91.77298,1.585)); +#182420 = VECTOR('',#182421,1.); +#182421 = DIRECTION('',(0.890177487146,-0.455613917015,0.)); +#182422 = ORIENTED_EDGE('',*,*,#182423,.T.); +#182423 = EDGE_CURVE('',#182416,#182424,#182426,.T.); +#182424 = VERTEX_POINT('',#182425); +#182425 = CARTESIAN_POINT('',(83.709771,-91.956669,1.585)); +#182426 = LINE('',#182427,#182428); +#182427 = CARTESIAN_POINT('',(83.671424,-91.912454,1.585)); +#182428 = VECTOR('',#182429,1.); +#182429 = DIRECTION('',(0.655197195491,-0.755457897583,0.)); +#182430 = ORIENTED_EDGE('',*,*,#182431,.T.); +#182431 = EDGE_CURVE('',#182424,#182432,#182434,.T.); +#182432 = VERTEX_POINT('',#182433); +#182433 = CARTESIAN_POINT('',(83.84794,-92.238953,1.585)); +#182434 = LINE('',#182435,#182436); +#182435 = CARTESIAN_POINT('',(83.709771,-91.956669,1.585)); +#182436 = VECTOR('',#182437,1.); +#182437 = DIRECTION('',(0.439629929294,-0.898179005137,0.)); +#182438 = ORIENTED_EDGE('',*,*,#182439,.T.); +#182439 = EDGE_CURVE('',#182432,#182440,#182442,.T.); +#182440 = VERTEX_POINT('',#182441); +#182441 = CARTESIAN_POINT('',(83.853266,-92.278572,1.585)); +#182442 = LINE('',#182443,#182444); +#182443 = CARTESIAN_POINT('',(83.84794,-92.238953,1.585)); +#182444 = VECTOR('',#182445,1.); +#182445 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#182446 = ORIENTED_EDGE('',*,*,#182447,.T.); +#182447 = EDGE_CURVE('',#182440,#182448,#182450,.T.); +#182448 = VERTEX_POINT('',#182449); +#182449 = CARTESIAN_POINT('',(83.853266,-92.862209,1.585)); +#182450 = LINE('',#182451,#182452); +#182451 = CARTESIAN_POINT('',(83.853266,-92.278572,1.585)); +#182452 = VECTOR('',#182453,1.); +#182453 = DIRECTION('',(0.,-1.,0.)); +#182454 = ORIENTED_EDGE('',*,*,#182455,.T.); +#182455 = EDGE_CURVE('',#182448,#182456,#182458,.T.); +#182456 = VERTEX_POINT('',#182457); +#182457 = CARTESIAN_POINT('',(83.919781,-92.995239,1.585)); +#182458 = LINE('',#182459,#182460); +#182459 = CARTESIAN_POINT('',(83.853266,-92.862209,1.585)); +#182460 = VECTOR('',#182461,1.); +#182461 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#182462 = ORIENTED_EDGE('',*,*,#182463,.T.); +#182463 = EDGE_CURVE('',#182456,#182464,#182466,.T.); +#182464 = VERTEX_POINT('',#182465); +#182465 = CARTESIAN_POINT('',(84.039285,-92.995239,1.585)); +#182466 = LINE('',#182467,#182468); +#182467 = CARTESIAN_POINT('',(83.919781,-92.995239,1.585)); +#182468 = VECTOR('',#182469,1.); +#182469 = DIRECTION('',(1.,0.,0.)); +#182470 = ORIENTED_EDGE('',*,*,#182471,.T.); +#182471 = EDGE_CURVE('',#182464,#182472,#182474,.T.); +#182472 = VERTEX_POINT('',#182473); +#182473 = CARTESIAN_POINT('',(84.21051,-92.909625,1.585)); +#182474 = LINE('',#182475,#182476); +#182475 = CARTESIAN_POINT('',(84.039285,-92.995239,1.585)); +#182476 = VECTOR('',#182477,1.); +#182477 = DIRECTION('',(0.894424056772,0.447219863901,0.)); +#182478 = ORIENTED_EDGE('',*,*,#182479,.T.); +#182479 = EDGE_CURVE('',#182472,#182480,#182482,.T.); +#182480 = VERTEX_POINT('',#182481); +#182481 = CARTESIAN_POINT('',(84.296123,-92.7384,1.585)); +#182482 = LINE('',#182483,#182484); +#182483 = CARTESIAN_POINT('',(84.21051,-92.909625,1.585)); +#182484 = VECTOR('',#182485,1.); +#182485 = DIRECTION('',(0.447215684974,0.89442614626,0.)); +#182486 = ORIENTED_EDGE('',*,*,#182487,.T.); +#182487 = EDGE_CURVE('',#182480,#182488,#182490,.T.); +#182488 = VERTEX_POINT('',#182489); +#182489 = CARTESIAN_POINT('',(84.296123,-92.313981,1.585)); +#182490 = LINE('',#182491,#182492); +#182491 = CARTESIAN_POINT('',(84.296123,-92.7384,1.585)); +#182492 = VECTOR('',#182493,1.); +#182493 = DIRECTION('',(0.,1.,0.)); +#182494 = ORIENTED_EDGE('',*,*,#182495,.T.); +#182495 = EDGE_CURVE('',#182488,#182496,#182498,.T.); +#182496 = VERTEX_POINT('',#182497); +#182497 = CARTESIAN_POINT('',(84.17764,-92.070571,1.585)); +#182498 = LINE('',#182499,#182500); +#182499 = CARTESIAN_POINT('',(84.296123,-92.313981,1.585)); +#182500 = VECTOR('',#182501,1.); +#182501 = DIRECTION('',(-0.437666805127,0.899137235181,0.)); +#182502 = ORIENTED_EDGE('',*,*,#182503,.T.); +#182503 = EDGE_CURVE('',#182496,#182504,#182506,.T.); +#182504 = VERTEX_POINT('',#182505); +#182505 = CARTESIAN_POINT('',(84.440813,-91.938986,1.585)); +#182506 = CIRCLE('',#182507,0.1500002614); +#182507 = AXIS2_PLACEMENT_3D('',#182508,#182509,#182510); +#182508 = CARTESIAN_POINT('',(84.32231391962,-92.03095363761,1.585)); +#182509 = DIRECTION('',(0.,0.,-1.)); +#182510 = DIRECTION('',(-0.964491116676,-0.264115288941,-0.)); +#182511 = ORIENTED_EDGE('',*,*,#182512,.T.); +#182512 = EDGE_CURVE('',#182504,#182513,#182515,.T.); +#182513 = VERTEX_POINT('',#182514); +#182514 = CARTESIAN_POINT('',(84.590797,-92.238953,1.585)); +#182515 = LINE('',#182516,#182517); +#182516 = CARTESIAN_POINT('',(84.440813,-91.938986,1.585)); +#182517 = VECTOR('',#182518,1.); +#182518 = DIRECTION('',(0.4472147882,-0.894426594649,0.)); +#182519 = ORIENTED_EDGE('',*,*,#182520,.T.); +#182520 = EDGE_CURVE('',#182513,#182521,#182523,.T.); +#182521 = VERTEX_POINT('',#182522); +#182522 = CARTESIAN_POINT('',(84.596123,-92.278572,1.585)); +#182523 = LINE('',#182524,#182525); +#182524 = CARTESIAN_POINT('',(84.590797,-92.238953,1.585)); +#182525 = VECTOR('',#182526,1.); +#182526 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#182527 = ORIENTED_EDGE('',*,*,#182528,.T.); +#182528 = EDGE_CURVE('',#182521,#182529,#182531,.T.); +#182529 = VERTEX_POINT('',#182530); +#182530 = CARTESIAN_POINT('',(84.593241,-92.803074,1.585)); +#182531 = LINE('',#182532,#182533); +#182532 = CARTESIAN_POINT('',(84.596123,-92.278572,1.585)); +#182533 = VECTOR('',#182534,1.); +#182534 = DIRECTION('',(-5.494653012067E-03,-0.99998490428,0.)); +#182535 = ORIENTED_EDGE('',*,*,#182536,.T.); +#182536 = EDGE_CURVE('',#182529,#182537,#182539,.T.); +#182537 = VERTEX_POINT('',#182538); +#182538 = CARTESIAN_POINT('',(84.580287,-92.840892,1.585)); +#182539 = LINE('',#182540,#182541); +#182540 = CARTESIAN_POINT('',(84.593241,-92.803074,1.585)); +#182541 = VECTOR('',#182542,1.); +#182542 = DIRECTION('',(-0.32405186212,-0.946039317712,0.)); +#182543 = ORIENTED_EDGE('',*,*,#182544,.T.); +#182544 = EDGE_CURVE('',#182537,#182545,#182547,.T.); +#182545 = VERTEX_POINT('',#182546); +#182546 = CARTESIAN_POINT('',(84.440813,-93.113396,1.585)); +#182547 = LINE('',#182548,#182549); +#182548 = CARTESIAN_POINT('',(84.580287,-92.840892,1.585)); +#182549 = VECTOR('',#182550,1.); +#182550 = DIRECTION('',(-0.455613917015,-0.890177487146,0.)); +#182551 = ORIENTED_EDGE('',*,*,#182552,.T.); +#182552 = EDGE_CURVE('',#182545,#182553,#182555,.T.); +#182553 = VERTEX_POINT('',#182554); +#182554 = CARTESIAN_POINT('',(84.396598,-93.151743,1.585)); +#182555 = LINE('',#182556,#182557); +#182556 = CARTESIAN_POINT('',(84.440813,-93.113396,1.585)); +#182557 = VECTOR('',#182558,1.); +#182558 = DIRECTION('',(-0.755457897583,-0.655197195491,0.)); +#182559 = ORIENTED_EDGE('',*,*,#182560,.T.); +#182560 = EDGE_CURVE('',#182553,#182561,#182563,.T.); +#182561 = VERTEX_POINT('',#182562); +#182562 = CARTESIAN_POINT('',(84.114314,-93.289913,1.585)); +#182563 = LINE('',#182564,#182565); +#182564 = CARTESIAN_POINT('',(84.396598,-93.151743,1.585)); +#182565 = VECTOR('',#182566,1.); +#182566 = DIRECTION('',(-0.898177748738,-0.43963249615,0.)); +#182567 = ORIENTED_EDGE('',*,*,#182568,.T.); +#182568 = EDGE_CURVE('',#182561,#182569,#182571,.T.); +#182569 = VERTEX_POINT('',#182570); +#182570 = CARTESIAN_POINT('',(84.074695,-93.295239,1.585)); +#182571 = LINE('',#182572,#182573); +#182572 = CARTESIAN_POINT('',(84.114314,-93.289913,1.585)); +#182573 = VECTOR('',#182574,1.); +#182574 = DIRECTION('',(-0.991084879219,-0.133231986338,0.)); +#182575 = ORIENTED_EDGE('',*,*,#182576,.T.); +#182576 = EDGE_CURVE('',#182569,#182577,#182579,.T.); +#182577 = VERTEX_POINT('',#182578); +#182578 = CARTESIAN_POINT('',(82.683526,-93.292357,1.585)); +#182579 = LINE('',#182580,#182581); +#182580 = CARTESIAN_POINT('',(84.074695,-93.295239,1.585)); +#182581 = VECTOR('',#182582,1.); +#182582 = DIRECTION('',(-0.999997854163,2.071634586234E-03,0.)); +#182583 = ORIENTED_EDGE('',*,*,#182584,.T.); +#182584 = EDGE_CURVE('',#182577,#182585,#182587,.T.); +#182585 = VERTEX_POINT('',#182586); +#182586 = CARTESIAN_POINT('',(82.58807,-93.061903,1.585)); +#182587 = CIRCLE('',#182588,0.150000415027); +#182588 = AXIS2_PLACEMENT_3D('',#182589,#182590,#182591); +#182589 = CARTESIAN_POINT('',(82.712790630259,-93.145239,1.585)); +#182590 = DIRECTION('',(0.,0.,-1.)); +#182591 = DIRECTION('',(-0.195096995257,-0.98078395299,-0.)); +#182592 = ORIENTED_EDGE('',*,*,#182593,.T.); +#182593 = EDGE_CURVE('',#182585,#182594,#182596,.T.); +#182594 = VERTEX_POINT('',#182595); +#182595 = CARTESIAN_POINT('',(82.614174,-93.035798,1.585)); +#182596 = LINE('',#182597,#182598); +#182597 = CARTESIAN_POINT('',(82.58807,-93.061903,1.585)); +#182598 = VECTOR('',#182599,1.); +#182599 = DIRECTION('',(0.707093237285,0.707120324829,0.)); +#182600 = ORIENTED_EDGE('',*,*,#182601,.T.); +#182601 = EDGE_CURVE('',#182594,#182602,#182604,.T.); +#182602 = VERTEX_POINT('',#182603); +#182603 = CARTESIAN_POINT('',(82.568116,-92.937239,1.585)); +#182604 = LINE('',#182605,#182606); +#182605 = CARTESIAN_POINT('',(82.614174,-93.035798,1.585)); +#182606 = VECTOR('',#182607,1.); +#182607 = DIRECTION('',(-0.423366981291,0.905958276717,0.)); +#182608 = ORIENTED_EDGE('',*,*,#182609,.T.); +#182609 = EDGE_CURVE('',#182602,#182610,#182612,.T.); +#182610 = VERTEX_POINT('',#182611); +#182611 = CARTESIAN_POINT('',(82.56279,-92.89762,1.585)); +#182612 = LINE('',#182613,#182614); +#182613 = CARTESIAN_POINT('',(82.568116,-92.937239,1.585)); +#182614 = VECTOR('',#182615,1.); +#182615 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#182616 = ORIENTED_EDGE('',*,*,#182617,.T.); +#182617 = EDGE_CURVE('',#182610,#182618,#182620,.T.); +#182618 = VERTEX_POINT('',#182619); +#182619 = CARTESIAN_POINT('',(82.565672,-92.249308,1.585)); +#182620 = LINE('',#182621,#182622); +#182621 = CARTESIAN_POINT('',(82.56279,-92.89762,1.585)); +#182622 = VECTOR('',#182623,1.); +#182623 = DIRECTION('',(4.445346567864E-03,0.999990119398,0.)); +#182624 = ORIENTED_EDGE('',*,*,#182625,.T.); +#182625 = EDGE_CURVE('',#182618,#182626,#182628,.T.); +#182626 = VERTEX_POINT('',#182627); +#182627 = CARTESIAN_POINT('',(82.578626,-92.21149,1.585)); +#182628 = LINE('',#182629,#182630); +#182629 = CARTESIAN_POINT('',(82.565672,-92.249308,1.585)); +#182630 = VECTOR('',#182631,1.); +#182631 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#182632 = ORIENTED_EDGE('',*,*,#182633,.T.); +#182633 = EDGE_CURVE('',#182626,#182634,#182636,.T.); +#182634 = VERTEX_POINT('',#182635); +#182635 = CARTESIAN_POINT('',(82.718101,-91.938985,1.585)); +#182636 = LINE('',#182637,#182638); +#182637 = CARTESIAN_POINT('',(82.578626,-92.21149,1.585)); +#182638 = VECTOR('',#182639,1.); +#182639 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#182640 = ORIENTED_EDGE('',*,*,#182641,.T.); +#182641 = EDGE_CURVE('',#182634,#182382,#182642,.T.); +#182642 = LINE('',#182643,#182644); +#182643 = CARTESIAN_POINT('',(82.718101,-91.938985,1.585)); +#182644 = VECTOR('',#182645,1.); +#182645 = DIRECTION('',(0.755457897583,0.655197195491,0.)); +#182646 = FACE_BOUND('',#182647,.F.); +#182647 = EDGE_LOOP('',(#182648,#182659,#182667,#182675,#182683,#182691, + #182699,#182707)); +#182648 = ORIENTED_EDGE('',*,*,#182649,.T.); +#182649 = EDGE_CURVE('',#182650,#182652,#182654,.T.); +#182650 = VERTEX_POINT('',#182651); +#182651 = CARTESIAN_POINT('',(83.467653,-92.142756,1.585)); +#182652 = VERTEX_POINT('',#182653); +#182653 = CARTESIAN_POINT('',(82.948403,-92.142756,1.585)); +#182654 = CIRCLE('',#182655,0.400706438266); +#182655 = AXIS2_PLACEMENT_3D('',#182656,#182657,#182658); +#182656 = CARTESIAN_POINT('',(83.208028,-92.44797806513,1.585)); +#182657 = DIRECTION('',(0.,0.,1.)); +#182658 = DIRECTION('',(0.64791821445,0.761709910257,-0.)); +#182659 = ORIENTED_EDGE('',*,*,#182660,.T.); +#182660 = EDGE_CURVE('',#182652,#182661,#182663,.T.); +#182661 = VERTEX_POINT('',#182662); +#182662 = CARTESIAN_POINT('',(82.86279,-92.313982,1.585)); +#182663 = LINE('',#182664,#182665); +#182664 = CARTESIAN_POINT('',(82.948403,-92.142756,1.585)); +#182665 = VECTOR('',#182666,1.); +#182666 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#182667 = ORIENTED_EDGE('',*,*,#182668,.T.); +#182668 = EDGE_CURVE('',#182661,#182669,#182671,.T.); +#182669 = VERTEX_POINT('',#182670); +#182670 = CARTESIAN_POINT('',(82.86279,-92.862209,1.585)); +#182671 = LINE('',#182672,#182673); +#182672 = CARTESIAN_POINT('',(82.86279,-92.313982,1.585)); +#182673 = VECTOR('',#182674,1.); +#182674 = DIRECTION('',(0.,-1.,0.)); +#182675 = ORIENTED_EDGE('',*,*,#182676,.T.); +#182676 = EDGE_CURVE('',#182669,#182677,#182679,.T.); +#182677 = VERTEX_POINT('',#182678); +#182678 = CARTESIAN_POINT('',(82.929305,-92.995239,1.585)); +#182679 = LINE('',#182680,#182681); +#182680 = CARTESIAN_POINT('',(82.86279,-92.862209,1.585)); +#182681 = VECTOR('',#182682,1.); +#182682 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#182683 = ORIENTED_EDGE('',*,*,#182684,.T.); +#182684 = EDGE_CURVE('',#182677,#182685,#182687,.T.); +#182685 = VERTEX_POINT('',#182686); +#182686 = CARTESIAN_POINT('',(83.58437,-92.995239,1.585)); +#182687 = LINE('',#182688,#182689); +#182688 = CARTESIAN_POINT('',(82.929305,-92.995239,1.585)); +#182689 = VECTOR('',#182690,1.); +#182690 = DIRECTION('',(1.,0.,0.)); +#182691 = ORIENTED_EDGE('',*,*,#182692,.T.); +#182692 = EDGE_CURVE('',#182685,#182693,#182695,.T.); +#182693 = VERTEX_POINT('',#182694); +#182694 = CARTESIAN_POINT('',(83.556148,-92.926884,1.585)); +#182695 = LINE('',#182696,#182697); +#182696 = CARTESIAN_POINT('',(83.58437,-92.995239,1.585)); +#182697 = VECTOR('',#182698,1.); +#182698 = DIRECTION('',(-0.381626303138,0.924316701544,0.)); +#182699 = ORIENTED_EDGE('',*,*,#182700,.T.); +#182700 = EDGE_CURVE('',#182693,#182701,#182703,.T.); +#182701 = VERTEX_POINT('',#182702); +#182702 = CARTESIAN_POINT('',(83.553266,-92.313981,1.585)); +#182703 = LINE('',#182704,#182705); +#182704 = CARTESIAN_POINT('',(83.556148,-92.926884,1.585)); +#182705 = VECTOR('',#182706,1.); +#182706 = DIRECTION('',(-4.702160274733E-03,0.999988944783,0.)); +#182707 = ORIENTED_EDGE('',*,*,#182708,.T.); +#182708 = EDGE_CURVE('',#182701,#182650,#182709,.T.); +#182709 = LINE('',#182710,#182711); +#182710 = CARTESIAN_POINT('',(83.553266,-92.313981,1.585)); +#182711 = VECTOR('',#182712,1.); +#182712 = DIRECTION('',(-0.447215684974,0.89442614626,0.)); +#182713 = PLANE('',#182714); +#182714 = AXIS2_PLACEMENT_3D('',#182715,#182716,#182717); +#182715 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182716 = DIRECTION('',(0.,0.,1.)); +#182717 = DIRECTION('',(1.,0.,-0.)); +#182718 = SHELL_BASED_SURFACE_MODEL('',(#182719)); +#182719 = OPEN_SHELL('',(#182720)); +#182720 = ADVANCED_FACE('',(#182721,#182822),#182905,.T.); +#182721 = FACE_BOUND('',#182722,.F.); +#182722 = EDGE_LOOP('',(#182723,#182734,#182742,#182750,#182758,#182767, + #182775,#182783,#182791,#182799,#182807,#182816)); +#182723 = ORIENTED_EDGE('',*,*,#182724,.T.); +#182724 = EDGE_CURVE('',#182725,#182727,#182729,.T.); +#182725 = VERTEX_POINT('',#182726); +#182726 = CARTESIAN_POINT('',(171.920714,-92.329597,1.585)); +#182727 = VERTEX_POINT('',#182728); +#182728 = CARTESIAN_POINT('',(171.985714,-92.264597,1.585)); +#182729 = CIRCLE('',#182730,6.500103935386E-02); +#182730 = AXIS2_PLACEMENT_3D('',#182731,#182732,#182733); +#182731 = CARTESIAN_POINT('',(171.98571503934,-92.32959803934,1.585)); +#182732 = DIRECTION('',(0.,0.,-1.)); +#182733 = DIRECTION('',(-0.999999999872,1.598967539908E-05,0.)); +#182734 = ORIENTED_EDGE('',*,*,#182735,.T.); +#182735 = EDGE_CURVE('',#182727,#182736,#182738,.T.); +#182736 = VERTEX_POINT('',#182737); +#182737 = CARTESIAN_POINT('',(172.210222,-92.26663,1.585)); +#182738 = LINE('',#182739,#182740); +#182739 = CARTESIAN_POINT('',(171.985714,-92.264597,1.585)); +#182740 = VECTOR('',#182741,1.); +#182741 = DIRECTION('',(0.99995900278,-9.054985357594E-03,0.)); +#182742 = ORIENTED_EDGE('',*,*,#182743,.T.); +#182743 = EDGE_CURVE('',#182736,#182744,#182746,.T.); +#182744 = VERTEX_POINT('',#182745); +#182745 = CARTESIAN_POINT('',(172.36211,-92.318191,1.585)); +#182746 = LINE('',#182747,#182748); +#182747 = CARTESIAN_POINT('',(172.210222,-92.26663,1.585)); +#182748 = VECTOR('',#182749,1.); +#182749 = DIRECTION('',(0.946926388211,-0.321450486559,0.)); +#182750 = ORIENTED_EDGE('',*,*,#182751,.T.); +#182751 = EDGE_CURVE('',#182744,#182752,#182754,.T.); +#182752 = VERTEX_POINT('',#182753); +#182753 = CARTESIAN_POINT('',(172.466037,-92.42087,1.585)); +#182754 = LINE('',#182755,#182756); +#182755 = CARTESIAN_POINT('',(172.36211,-92.318191,1.585)); +#182756 = VECTOR('',#182757,1.); +#182757 = DIRECTION('',(0.711365069748,-0.70282269282,0.)); +#182758 = ORIENTED_EDGE('',*,*,#182759,.T.); +#182759 = EDGE_CURVE('',#182752,#182760,#182762,.T.); +#182760 = VERTEX_POINT('',#182761); +#182761 = CARTESIAN_POINT('',(172.563059,-92.859647,1.585)); +#182762 = CIRCLE('',#182763,0.67543082859); +#182763 = AXIS2_PLACEMENT_3D('',#182764,#182765,#182766); +#182764 = CARTESIAN_POINT('',(171.89260778858,-92.77778139475,1.585)); +#182765 = DIRECTION('',(0.,0.,-1.)); +#182766 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#182767 = ORIENTED_EDGE('',*,*,#182768,.T.); +#182768 = EDGE_CURVE('',#182760,#182769,#182771,.T.); +#182769 = VERTEX_POINT('',#182770); +#182770 = CARTESIAN_POINT('',(172.515281,-93.04438,1.585)); +#182771 = LINE('',#182772,#182773); +#182772 = CARTESIAN_POINT('',(172.563059,-92.859647,1.585)); +#182773 = VECTOR('',#182774,1.); +#182774 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#182775 = ORIENTED_EDGE('',*,*,#182776,.T.); +#182776 = EDGE_CURVE('',#182769,#182777,#182779,.T.); +#182777 = VERTEX_POINT('',#182778); +#182778 = CARTESIAN_POINT('',(172.460248,-93.146987,1.585)); +#182779 = LINE('',#182780,#182781); +#182780 = CARTESIAN_POINT('',(172.515281,-93.04438,1.585)); +#182781 = VECTOR('',#182782,1.); +#182782 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#182783 = ORIENTED_EDGE('',*,*,#182784,.T.); +#182784 = EDGE_CURVE('',#182777,#182785,#182787,.T.); +#182785 = VERTEX_POINT('',#182786); +#182786 = CARTESIAN_POINT('',(172.362114,-93.240999,1.585)); +#182787 = LINE('',#182788,#182789); +#182788 = CARTESIAN_POINT('',(172.460248,-93.146987,1.585)); +#182789 = VECTOR('',#182790,1.); +#182790 = DIRECTION('',(-0.722109804107,-0.691778455007,0.)); +#182791 = ORIENTED_EDGE('',*,*,#182792,.T.); +#182792 = EDGE_CURVE('',#182785,#182793,#182795,.T.); +#182793 = VERTEX_POINT('',#182794); +#182794 = CARTESIAN_POINT('',(172.210222,-93.292563,1.585)); +#182795 = LINE('',#182796,#182797); +#182796 = CARTESIAN_POINT('',(172.362114,-93.240999,1.585)); +#182797 = VECTOR('',#182798,1.); +#182798 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#182799 = ORIENTED_EDGE('',*,*,#182800,.T.); +#182800 = EDGE_CURVE('',#182793,#182801,#182803,.T.); +#182801 = VERTEX_POINT('',#182802); +#182802 = CARTESIAN_POINT('',(171.985714,-93.294597,1.585)); +#182803 = LINE('',#182804,#182805); +#182804 = CARTESIAN_POINT('',(172.210222,-93.292563,1.585)); +#182805 = VECTOR('',#182806,1.); +#182806 = DIRECTION('',(-0.999958962441,-9.059438993706E-03,0.)); +#182807 = ORIENTED_EDGE('',*,*,#182808,.T.); +#182808 = EDGE_CURVE('',#182801,#182809,#182811,.T.); +#182809 = VERTEX_POINT('',#182810); +#182810 = CARTESIAN_POINT('',(171.920714,-93.229597,1.585)); +#182811 = CIRCLE('',#182812,6.500103935386E-02); +#182812 = AXIS2_PLACEMENT_3D('',#182813,#182814,#182815); +#182813 = CARTESIAN_POINT('',(171.98571503934,-93.22959596065,1.585)); +#182814 = DIRECTION('',(0.,0.,-1.)); +#182815 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#182816 = ORIENTED_EDGE('',*,*,#182817,.T.); +#182817 = EDGE_CURVE('',#182809,#182725,#182818,.T.); +#182818 = LINE('',#182819,#182820); +#182819 = CARTESIAN_POINT('',(171.920714,-93.229597,1.585)); +#182820 = VECTOR('',#182821,1.); +#182821 = DIRECTION('',(0.,1.,0.)); +#182822 = FACE_BOUND('',#182823,.F.); +#182823 = EDGE_LOOP('',(#182824,#182834,#182842,#182850,#182858,#182866, + #182874,#182883,#182891,#182899)); +#182824 = ORIENTED_EDGE('',*,*,#182825,.T.); +#182825 = EDGE_CURVE('',#182826,#182828,#182830,.T.); +#182826 = VERTEX_POINT('',#182827); +#182827 = CARTESIAN_POINT('',(172.293458,-92.429265,1.585)); +#182828 = VERTEX_POINT('',#182829); +#182829 = CARTESIAN_POINT('',(172.189453,-92.394597,1.585)); +#182830 = LINE('',#182831,#182832); +#182831 = CARTESIAN_POINT('',(172.293458,-92.429265,1.585)); +#182832 = VECTOR('',#182833,1.); +#182833 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#182834 = ORIENTED_EDGE('',*,*,#182835,.T.); +#182835 = EDGE_CURVE('',#182828,#182836,#182838,.T.); +#182836 = VERTEX_POINT('',#182837); +#182837 = CARTESIAN_POINT('',(172.050714,-92.394597,1.585)); +#182838 = LINE('',#182839,#182840); +#182839 = CARTESIAN_POINT('',(172.189453,-92.394597,1.585)); +#182840 = VECTOR('',#182841,1.); +#182841 = DIRECTION('',(-1.,0.,0.)); +#182842 = ORIENTED_EDGE('',*,*,#182843,.T.); +#182843 = EDGE_CURVE('',#182836,#182844,#182846,.T.); +#182844 = VERTEX_POINT('',#182845); +#182845 = CARTESIAN_POINT('',(172.050714,-93.164597,1.585)); +#182846 = LINE('',#182847,#182848); +#182847 = CARTESIAN_POINT('',(172.050714,-92.394597,1.585)); +#182848 = VECTOR('',#182849,1.); +#182849 = DIRECTION('',(0.,-1.,0.)); +#182850 = ORIENTED_EDGE('',*,*,#182851,.T.); +#182851 = EDGE_CURVE('',#182844,#182852,#182854,.T.); +#182852 = VERTEX_POINT('',#182853); +#182853 = CARTESIAN_POINT('',(172.189453,-93.164597,1.585)); +#182854 = LINE('',#182855,#182856); +#182855 = CARTESIAN_POINT('',(172.050714,-93.164597,1.585)); +#182856 = VECTOR('',#182857,1.); +#182857 = DIRECTION('',(1.,0.,0.)); +#182858 = ORIENTED_EDGE('',*,*,#182859,.T.); +#182859 = EDGE_CURVE('',#182852,#182860,#182862,.T.); +#182860 = VERTEX_POINT('',#182861); +#182861 = CARTESIAN_POINT('',(172.293458,-93.129928,1.585)); +#182862 = LINE('',#182863,#182864); +#182863 = CARTESIAN_POINT('',(172.189453,-93.164597,1.585)); +#182864 = VECTOR('',#182865,1.); +#182865 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#182866 = ORIENTED_EDGE('',*,*,#182867,.T.); +#182867 = EDGE_CURVE('',#182860,#182868,#182870,.T.); +#182868 = VERTEX_POINT('',#182869); +#182869 = CARTESIAN_POINT('',(172.360865,-93.062522,1.585)); +#182870 = LINE('',#182871,#182872); +#182871 = CARTESIAN_POINT('',(172.293458,-93.129928,1.585)); +#182872 = VECTOR('',#182873,1.); +#182873 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#182874 = ORIENTED_EDGE('',*,*,#182875,.T.); +#182875 = EDGE_CURVE('',#182868,#182876,#182878,.T.); +#182876 = VERTEX_POINT('',#182877); +#182877 = CARTESIAN_POINT('',(172.435,-92.723311,1.585)); +#182878 = CIRCLE('',#182879,0.553325470752); +#182879 = AXIS2_PLACEMENT_3D('',#182880,#182881,#182882); +#182880 = CARTESIAN_POINT('',(171.88466292366,-92.78074077444,1.585)); +#182881 = DIRECTION('',(0.,0.,1.)); +#182882 = DIRECTION('',(0.860618390997,-0.509250414902,0.)); +#182883 = ORIENTED_EDGE('',*,*,#182884,.T.); +#182884 = EDGE_CURVE('',#182876,#182885,#182887,.T.); +#182885 = VERTEX_POINT('',#182886); +#182886 = CARTESIAN_POINT('',(172.395814,-92.56657,1.585)); +#182887 = LINE('',#182888,#182889); +#182888 = CARTESIAN_POINT('',(172.435,-92.723311,1.585)); +#182889 = VECTOR('',#182890,1.); +#182890 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#182891 = ORIENTED_EDGE('',*,*,#182892,.T.); +#182892 = EDGE_CURVE('',#182885,#182893,#182895,.T.); +#182893 = VERTEX_POINT('',#182894); +#182894 = CARTESIAN_POINT('',(172.360864,-92.496669,1.585)); +#182895 = LINE('',#182896,#182897); +#182896 = CARTESIAN_POINT('',(172.395814,-92.56657,1.585)); +#182897 = VECTOR('',#182898,1.); +#182898 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#182899 = ORIENTED_EDGE('',*,*,#182900,.T.); +#182900 = EDGE_CURVE('',#182893,#182826,#182901,.T.); +#182901 = LINE('',#182902,#182903); +#182902 = CARTESIAN_POINT('',(172.360864,-92.496669,1.585)); +#182903 = VECTOR('',#182904,1.); +#182904 = DIRECTION('',(-0.707117271529,0.707096290688,0.)); +#182905 = PLANE('',#182906); +#182906 = AXIS2_PLACEMENT_3D('',#182907,#182908,#182909); +#182907 = CARTESIAN_POINT('',(0.,0.,1.585)); +#182908 = DIRECTION('',(0.,0.,1.)); +#182909 = DIRECTION('',(1.,0.,-0.)); +#182910 = SHELL_BASED_SURFACE_MODEL('',(#182911)); +#182911 = OPEN_SHELL('',(#182912)); +#182912 = ADVANCED_FACE('',(#182913),#183031,.T.); +#182913 = FACE_BOUND('',#182914,.F.); +#182914 = EDGE_LOOP('',(#182915,#182926,#182934,#182942,#182950,#182958, + #182966,#182974,#182983,#182991,#183000,#183008,#183016,#183025)); +#182915 = ORIENTED_EDGE('',*,*,#182916,.T.); +#182916 = EDGE_CURVE('',#182917,#182919,#182921,.T.); +#182917 = VERTEX_POINT('',#182918); +#182918 = CARTESIAN_POINT('',(170.977857,-92.329597,1.585)); +#182919 = VERTEX_POINT('',#182920); +#182920 = CARTESIAN_POINT('',(171.03466,-92.265116,1.585)); +#182921 = CIRCLE('',#182922,6.499996854972E-02); +#182922 = AXIS2_PLACEMENT_3D('',#182923,#182924,#182925); +#182923 = CARTESIAN_POINT('',(171.04285696855,-92.32959704851,1.585)); +#182924 = DIRECTION('',(0.,0.,-1.)); +#182925 = DIRECTION('',(-1.,7.464405904505E-07,0.)); +#182926 = ORIENTED_EDGE('',*,*,#182927,.T.); +#182927 = EDGE_CURVE('',#182919,#182928,#182930,.T.); +#182928 = VERTEX_POINT('',#182929); +#182929 = CARTESIAN_POINT('',(171.050899,-92.269545,1.585)); +#182930 = LINE('',#182931,#182932); +#182931 = CARTESIAN_POINT('',(171.03466,-92.265116,1.585)); +#182932 = VECTOR('',#182933,1.); +#182933 = DIRECTION('',(0.96476107918,-0.263127459799,0.)); +#182934 = ORIENTED_EDGE('',*,*,#182935,.T.); +#182935 = EDGE_CURVE('',#182928,#182936,#182938,.T.); +#182936 = VERTEX_POINT('',#182937); +#182937 = CARTESIAN_POINT('',(171.067731,-92.269545,1.585)); +#182938 = LINE('',#182939,#182940); +#182939 = CARTESIAN_POINT('',(171.050899,-92.269545,1.585)); +#182940 = VECTOR('',#182941,1.); +#182941 = DIRECTION('',(1.,0.,0.)); +#182942 = ORIENTED_EDGE('',*,*,#182943,.T.); +#182943 = EDGE_CURVE('',#182936,#182944,#182946,.T.); +#182944 = VERTEX_POINT('',#182945); +#182945 = CARTESIAN_POINT('',(171.082656,-92.278206,1.585)); +#182946 = LINE('',#182947,#182948); +#182947 = CARTESIAN_POINT('',(171.067731,-92.269545,1.585)); +#182948 = VECTOR('',#182949,1.); +#182949 = DIRECTION('',(0.86491798857,-0.501913212665,0.)); +#182950 = ORIENTED_EDGE('',*,*,#182951,.T.); +#182951 = EDGE_CURVE('',#182944,#182952,#182954,.T.); +#182952 = VERTEX_POINT('',#182953); +#182953 = CARTESIAN_POINT('',(171.099293,-92.297348,1.585)); +#182954 = LINE('',#182955,#182956); +#182955 = CARTESIAN_POINT('',(171.082656,-92.278206,1.585)); +#182956 = VECTOR('',#182957,1.); +#182957 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#182958 = ORIENTED_EDGE('',*,*,#182959,.T.); +#182959 = EDGE_CURVE('',#182952,#182960,#182962,.T.); +#182960 = VERTEX_POINT('',#182961); +#182961 = CARTESIAN_POINT('',(171.492143,-92.984835,1.585)); +#182962 = LINE('',#182963,#182964); +#182963 = CARTESIAN_POINT('',(171.099293,-92.297348,1.585)); +#182964 = VECTOR('',#182965,1.); +#182965 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#182966 = ORIENTED_EDGE('',*,*,#182967,.T.); +#182967 = EDGE_CURVE('',#182960,#182968,#182970,.T.); +#182968 = VERTEX_POINT('',#182969); +#182969 = CARTESIAN_POINT('',(171.492143,-92.329597,1.585)); +#182970 = LINE('',#182971,#182972); +#182971 = CARTESIAN_POINT('',(171.492143,-92.984835,1.585)); +#182972 = VECTOR('',#182973,1.); +#182973 = DIRECTION('',(0.,1.,0.)); +#182974 = ORIENTED_EDGE('',*,*,#182975,.T.); +#182975 = EDGE_CURVE('',#182968,#182976,#182978,.T.); +#182976 = VERTEX_POINT('',#182977); +#182977 = CARTESIAN_POINT('',(171.622143,-92.329597,1.585)); +#182978 = CIRCLE('',#182979,6.500000000091E-02); +#182979 = AXIS2_PLACEMENT_3D('',#182980,#182981,#182982); +#182980 = CARTESIAN_POINT('',(171.557143,-92.32959734486,1.585)); +#182981 = DIRECTION('',(0.,0.,-1.)); +#182982 = DIRECTION('',(-0.999999999986,5.305658025669E-06,0.)); +#182983 = ORIENTED_EDGE('',*,*,#182984,.T.); +#182984 = EDGE_CURVE('',#182976,#182985,#182987,.T.); +#182985 = VERTEX_POINT('',#182986); +#182986 = CARTESIAN_POINT('',(171.622143,-93.229597,1.585)); +#182987 = LINE('',#182988,#182989); +#182988 = CARTESIAN_POINT('',(171.622143,-92.329597,1.585)); +#182989 = VECTOR('',#182990,1.); +#182990 = DIRECTION('',(0.,-1.,0.)); +#182991 = ORIENTED_EDGE('',*,*,#182992,.T.); +#182992 = EDGE_CURVE('',#182985,#182993,#182995,.T.); +#182993 = VERTEX_POINT('',#182994); +#182994 = CARTESIAN_POINT('',(171.500707,-93.261846,1.585)); +#182995 = CIRCLE('',#182996,6.500021194141E-02); +#182996 = AXIS2_PLACEMENT_3D('',#182997,#182998,#182999); +#182997 = CARTESIAN_POINT('',(171.55714278806,-93.22959651351,1.585)); +#182998 = DIRECTION('',(-0.,0.,-1.)); +#182999 = DIRECTION('',(0.999999999972,-7.484332115461E-06,-0.)); +#183000 = ORIENTED_EDGE('',*,*,#183001,.T.); +#183001 = EDGE_CURVE('',#182993,#183002,#183004,.T.); +#183002 = VERTEX_POINT('',#183003); +#183003 = CARTESIAN_POINT('',(171.107857,-92.574358,1.585)); +#183004 = LINE('',#183005,#183006); +#183005 = CARTESIAN_POINT('',(171.500707,-93.261846,1.585)); +#183006 = VECTOR('',#183007,1.); +#183007 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#183008 = ORIENTED_EDGE('',*,*,#183009,.T.); +#183009 = EDGE_CURVE('',#183002,#183010,#183012,.T.); +#183010 = VERTEX_POINT('',#183011); +#183011 = CARTESIAN_POINT('',(171.107857,-93.229597,1.585)); +#183012 = LINE('',#183013,#183014); +#183013 = CARTESIAN_POINT('',(171.107857,-92.574358,1.585)); +#183014 = VECTOR('',#183015,1.); +#183015 = DIRECTION('',(0.,-1.,0.)); +#183016 = ORIENTED_EDGE('',*,*,#183017,.T.); +#183017 = EDGE_CURVE('',#183010,#183018,#183020,.T.); +#183018 = VERTEX_POINT('',#183019); +#183019 = CARTESIAN_POINT('',(170.977857,-93.229597,1.585)); +#183020 = CIRCLE('',#183021,6.500000000091E-02); +#183021 = AXIS2_PLACEMENT_3D('',#183022,#183023,#183024); +#183022 = CARTESIAN_POINT('',(171.042857,-93.22959665513,1.585)); +#183023 = DIRECTION('',(-0.,0.,-1.)); +#183024 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#183025 = ORIENTED_EDGE('',*,*,#183026,.T.); +#183026 = EDGE_CURVE('',#183018,#182917,#183027,.T.); +#183027 = LINE('',#183028,#183029); +#183028 = CARTESIAN_POINT('',(170.977857,-93.229597,1.585)); +#183029 = VECTOR('',#183030,1.); +#183030 = DIRECTION('',(0.,1.,0.)); +#183031 = PLANE('',#183032); +#183032 = AXIS2_PLACEMENT_3D('',#183033,#183034,#183035); +#183033 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183034 = DIRECTION('',(0.,0.,1.)); +#183035 = DIRECTION('',(1.,0.,-0.)); +#183036 = SHELL_BASED_SURFACE_MODEL('',(#183037)); +#183037 = OPEN_SHELL('',(#183038)); +#183038 = ADVANCED_FACE('',(#183039),#183289,.T.); +#183039 = FACE_BOUND('',#183040,.F.); +#183040 = EDGE_LOOP('',(#183041,#183051,#183059,#183068,#183076,#183085, + #183093,#183101,#183109,#183117,#183126,#183134,#183142,#183150, + #183159,#183167,#183175,#183183,#183192,#183200,#183209,#183217, + #183225,#183233,#183241,#183250,#183258,#183267,#183275,#183283)); +#183041 = ORIENTED_EDGE('',*,*,#183042,.T.); +#183042 = EDGE_CURVE('',#183043,#183045,#183047,.T.); +#183043 = VERTEX_POINT('',#183044); +#183044 = CARTESIAN_POINT('',(170.237892,-92.31819,1.585)); +#183045 = VERTEX_POINT('',#183046); +#183046 = CARTESIAN_POINT('',(170.389777,-92.26663,1.585)); +#183047 = LINE('',#183048,#183049); +#183048 = CARTESIAN_POINT('',(170.237892,-92.31819,1.585)); +#183049 = VECTOR('',#183050,1.); +#183050 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#183051 = ORIENTED_EDGE('',*,*,#183052,.T.); +#183052 = EDGE_CURVE('',#183045,#183053,#183055,.T.); +#183053 = VERTEX_POINT('',#183054); +#183054 = CARTESIAN_POINT('',(170.531765,-92.265232,1.585)); +#183055 = LINE('',#183056,#183057); +#183056 = CARTESIAN_POINT('',(170.389777,-92.26663,1.585)); +#183057 = VECTOR('',#183058,1.); +#183058 = DIRECTION('',(0.999951532626,9.845425265658E-03,0.)); +#183059 = ORIENTED_EDGE('',*,*,#183060,.T.); +#183060 = EDGE_CURVE('',#183053,#183061,#183063,.T.); +#183061 = VERTEX_POINT('',#183062); +#183062 = CARTESIAN_POINT('',(170.66339,-92.329866,1.585)); +#183063 = CIRCLE('',#183064,0.276414597198); +#183064 = AXIS2_PLACEMENT_3D('',#183065,#183066,#183067); +#183065 = CARTESIAN_POINT('',(170.48010572554,-92.53677637741,1.585)); +#183066 = DIRECTION('',(0.,0.,-1.)); +#183067 = DIRECTION('',(0.186890544039,0.982380743169,0.)); +#183068 = ORIENTED_EDGE('',*,*,#183069,.T.); +#183069 = EDGE_CURVE('',#183061,#183070,#183072,.T.); +#183070 = VERTEX_POINT('',#183071); +#183071 = CARTESIAN_POINT('',(170.679122,-92.377062,1.585)); +#183072 = LINE('',#183073,#183074); +#183073 = CARTESIAN_POINT('',(170.66339,-92.329866,1.585)); +#183074 = VECTOR('',#183075,1.); +#183075 = DIRECTION('',(0.316227766017,-0.94868329805,0.)); +#183076 = ORIENTED_EDGE('',*,*,#183077,.T.); +#183077 = EDGE_CURVE('',#183070,#183078,#183080,.T.); +#183078 = VERTEX_POINT('',#183079); +#183079 = CARTESIAN_POINT('',(170.585217,-92.430592,1.585)); +#183080 = CIRCLE('',#183081,6.50002600426E-02); +#183081 = AXIS2_PLACEMENT_3D('',#183082,#183083,#183084); +#183082 = CARTESIAN_POINT('',(170.61428530559,-92.37245365279,1.585)); +#183083 = DIRECTION('',(0.,0.,-1.)); +#183084 = DIRECTION('',(0.997483615677,-7.089736565066E-02,0.)); +#183085 = ORIENTED_EDGE('',*,*,#183086,.T.); +#183086 = EDGE_CURVE('',#183078,#183087,#183089,.T.); +#183087 = VERTEX_POINT('',#183088); +#183088 = CARTESIAN_POINT('',(170.513227,-92.394597,1.585)); +#183089 = LINE('',#183090,#183091); +#183090 = CARTESIAN_POINT('',(170.585217,-92.430592,1.585)); +#183091 = VECTOR('',#183092,1.); +#183092 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#183093 = ORIENTED_EDGE('',*,*,#183094,.T.); +#183094 = EDGE_CURVE('',#183087,#183095,#183097,.T.); +#183095 = VERTEX_POINT('',#183096); +#183096 = CARTESIAN_POINT('',(170.410547,-92.394597,1.585)); +#183097 = LINE('',#183098,#183099); +#183098 = CARTESIAN_POINT('',(170.513227,-92.394597,1.585)); +#183099 = VECTOR('',#183100,1.); +#183100 = DIRECTION('',(-1.,0.,0.)); +#183101 = ORIENTED_EDGE('',*,*,#183102,.T.); +#183102 = EDGE_CURVE('',#183095,#183103,#183105,.T.); +#183103 = VERTEX_POINT('',#183104); +#183104 = CARTESIAN_POINT('',(170.306541,-92.429265,1.585)); +#183105 = LINE('',#183106,#183107); +#183106 = CARTESIAN_POINT('',(170.410547,-92.394597,1.585)); +#183107 = VECTOR('',#183108,1.); +#183108 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#183109 = ORIENTED_EDGE('',*,*,#183110,.T.); +#183110 = EDGE_CURVE('',#183103,#183111,#183113,.T.); +#183111 = VERTEX_POINT('',#183112); +#183112 = CARTESIAN_POINT('',(170.239134,-92.496671,1.585)); +#183113 = LINE('',#183114,#183115); +#183114 = CARTESIAN_POINT('',(170.306541,-92.429265,1.585)); +#183115 = VECTOR('',#183116,1.); +#183116 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#183117 = ORIENTED_EDGE('',*,*,#183118,.T.); +#183118 = EDGE_CURVE('',#183111,#183119,#183121,.T.); +#183119 = VERTEX_POINT('',#183120); +#183120 = CARTESIAN_POINT('',(170.165,-92.835881,1.585)); +#183121 = CIRCLE('',#183122,0.553307903116); +#183122 = AXIS2_PLACEMENT_3D('',#183123,#183124,#183125); +#183123 = CARTESIAN_POINT('',(170.71531893982,-92.77844668868,1.585)); +#183124 = DIRECTION('',(0.,0.,1.)); +#183125 = DIRECTION('',(-0.860614744786,0.509256576842,0.)); +#183126 = ORIENTED_EDGE('',*,*,#183127,.T.); +#183127 = EDGE_CURVE('',#183119,#183128,#183130,.T.); +#183128 = VERTEX_POINT('',#183129); +#183129 = CARTESIAN_POINT('',(170.204185,-92.992622,1.585)); +#183130 = LINE('',#183131,#183132); +#183131 = CARTESIAN_POINT('',(170.165,-92.835881,1.585)); +#183132 = VECTOR('',#183133,1.); +#183133 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#183134 = ORIENTED_EDGE('',*,*,#183135,.T.); +#183135 = EDGE_CURVE('',#183128,#183136,#183138,.T.); +#183136 = VERTEX_POINT('',#183137); +#183137 = CARTESIAN_POINT('',(170.239135,-93.062522,1.585)); +#183138 = LINE('',#183139,#183140); +#183139 = CARTESIAN_POINT('',(170.204185,-92.992622,1.585)); +#183140 = VECTOR('',#183141,1.); +#183141 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#183142 = ORIENTED_EDGE('',*,*,#183143,.T.); +#183143 = EDGE_CURVE('',#183136,#183144,#183146,.T.); +#183144 = VERTEX_POINT('',#183145); +#183145 = CARTESIAN_POINT('',(170.306541,-93.129928,1.585)); +#183146 = LINE('',#183147,#183148); +#183147 = CARTESIAN_POINT('',(170.239135,-93.062522,1.585)); +#183148 = VECTOR('',#183149,1.); +#183149 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183150 = ORIENTED_EDGE('',*,*,#183151,.T.); +#183151 = EDGE_CURVE('',#183144,#183152,#183154,.T.); +#183152 = VERTEX_POINT('',#183153); +#183153 = CARTESIAN_POINT('',(170.579175,-93.129927,1.585)); +#183154 = CIRCLE('',#183155,0.272195913583); +#183155 = AXIS2_PLACEMENT_3D('',#183156,#183157,#183158); +#183156 = CARTESIAN_POINT('',(170.44285713583,-92.89432552445,1.585)); +#183157 = DIRECTION('',(0.,0.,1.)); +#183158 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#183159 = ORIENTED_EDGE('',*,*,#183160,.T.); +#183160 = EDGE_CURVE('',#183152,#183161,#183163,.T.); +#183161 = VERTEX_POINT('',#183162); +#183162 = CARTESIAN_POINT('',(170.592143,-93.116958,1.585)); +#183163 = LINE('',#183164,#183165); +#183164 = CARTESIAN_POINT('',(170.579175,-93.129927,1.585)); +#183165 = VECTOR('',#183166,1.); +#183166 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#183167 = ORIENTED_EDGE('',*,*,#183168,.T.); +#183168 = EDGE_CURVE('',#183161,#183169,#183171,.T.); +#183169 = VERTEX_POINT('',#183170); +#183170 = CARTESIAN_POINT('',(170.592143,-92.908882,1.585)); +#183171 = LINE('',#183172,#183173); +#183172 = CARTESIAN_POINT('',(170.592143,-93.116958,1.585)); +#183173 = VECTOR('',#183174,1.); +#183174 = DIRECTION('',(0.,1.,0.)); +#183175 = ORIENTED_EDGE('',*,*,#183176,.T.); +#183176 = EDGE_CURVE('',#183169,#183177,#183179,.T.); +#183177 = VERTEX_POINT('',#183178); +#183178 = CARTESIAN_POINT('',(170.485714,-92.908882,1.585)); +#183179 = LINE('',#183180,#183181); +#183180 = CARTESIAN_POINT('',(170.592143,-92.908882,1.585)); +#183181 = VECTOR('',#183182,1.); +#183182 = DIRECTION('',(-1.,0.,0.)); +#183183 = ORIENTED_EDGE('',*,*,#183184,.T.); +#183184 = EDGE_CURVE('',#183177,#183185,#183187,.T.); +#183185 = VERTEX_POINT('',#183186); +#183186 = CARTESIAN_POINT('',(170.485714,-92.778882,1.585)); +#183187 = CIRCLE('',#183188,6.500000000093E-02); +#183188 = AXIS2_PLACEMENT_3D('',#183189,#183190,#183191); +#183189 = CARTESIAN_POINT('',(170.48571434486,-92.843882,1.585)); +#183190 = DIRECTION('',(0.,0.,-1.)); +#183191 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#183192 = ORIENTED_EDGE('',*,*,#183193,.T.); +#183193 = EDGE_CURVE('',#183185,#183194,#183196,.T.); +#183194 = VERTEX_POINT('',#183195); +#183195 = CARTESIAN_POINT('',(170.657143,-92.778882,1.585)); +#183196 = LINE('',#183197,#183198); +#183197 = CARTESIAN_POINT('',(170.485714,-92.778882,1.585)); +#183198 = VECTOR('',#183199,1.); +#183199 = DIRECTION('',(1.,0.,0.)); +#183200 = ORIENTED_EDGE('',*,*,#183201,.T.); +#183201 = EDGE_CURVE('',#183194,#183202,#183204,.T.); +#183202 = VERTEX_POINT('',#183203); +#183203 = CARTESIAN_POINT('',(170.722143,-92.843882,1.585)); +#183204 = CIRCLE('',#183205,6.500103935386E-02); +#183205 = AXIS2_PLACEMENT_3D('',#183206,#183207,#183208); +#183206 = CARTESIAN_POINT('',(170.65714196065,-92.84388303934,1.585)); +#183207 = DIRECTION('',(0.,0.,-1.)); +#183208 = DIRECTION('',(1.598967605495E-05,0.999999999872,0.)); +#183209 = ORIENTED_EDGE('',*,*,#183210,.T.); +#183210 = EDGE_CURVE('',#183202,#183211,#183213,.T.); +#183211 = VERTEX_POINT('',#183212); +#183212 = CARTESIAN_POINT('',(170.722143,-93.143882,1.585)); +#183213 = LINE('',#183214,#183215); +#183214 = CARTESIAN_POINT('',(170.722143,-92.843882,1.585)); +#183215 = VECTOR('',#183216,1.); +#183216 = DIRECTION('',(0.,-1.,0.)); +#183217 = ORIENTED_EDGE('',*,*,#183218,.T.); +#183218 = EDGE_CURVE('',#183211,#183219,#183221,.T.); +#183219 = VERTEX_POINT('',#183220); +#183220 = CARTESIAN_POINT('',(170.717195,-93.168756,1.585)); +#183221 = LINE('',#183222,#183223); +#183222 = CARTESIAN_POINT('',(170.722143,-93.143882,1.585)); +#183223 = VECTOR('',#183224,1.); +#183224 = DIRECTION('',(-0.19509994748,-0.98078336573,0.)); +#183225 = ORIENTED_EDGE('',*,*,#183226,.T.); +#183226 = EDGE_CURVE('',#183219,#183227,#183229,.T.); +#183227 = VERTEX_POINT('',#183228); +#183228 = CARTESIAN_POINT('',(170.703106,-93.189843,1.585)); +#183229 = LINE('',#183230,#183231); +#183230 = CARTESIAN_POINT('',(170.717195,-93.168756,1.585)); +#183231 = VECTOR('',#183232,1.); +#183232 = DIRECTION('',(-0.555546163521,-0.831485694524,0.)); +#183233 = ORIENTED_EDGE('',*,*,#183234,.T.); +#183234 = EDGE_CURVE('',#183227,#183235,#183237,.T.); +#183235 = VERTEX_POINT('',#183236); +#183236 = CARTESIAN_POINT('',(170.647819,-93.241005,1.585)); +#183237 = LINE('',#183238,#183239); +#183238 = CARTESIAN_POINT('',(170.703106,-93.189843,1.585)); +#183239 = VECTOR('',#183240,1.); +#183240 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#183241 = ORIENTED_EDGE('',*,*,#183242,.T.); +#183242 = EDGE_CURVE('',#183235,#183243,#183245,.T.); +#183243 = VERTEX_POINT('',#183244); +#183244 = CARTESIAN_POINT('',(170.237885,-93.240999,1.585)); +#183245 = CIRCLE('',#183246,0.409311833232); +#183246 = AXIS2_PLACEMENT_3D('',#183247,#183248,#183249); +#183247 = CARTESIAN_POINT('',(170.44285718563,-92.88670734057,1.585)); +#183248 = DIRECTION('',(-0.,0.,-1.)); +#183249 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#183250 = ORIENTED_EDGE('',*,*,#183251,.T.); +#183251 = EDGE_CURVE('',#183243,#183252,#183254,.T.); +#183252 = VERTEX_POINT('',#183253); +#183253 = CARTESIAN_POINT('',(170.133962,-93.138322,1.585)); +#183254 = LINE('',#183255,#183256); +#183255 = CARTESIAN_POINT('',(170.237885,-93.240999,1.585)); +#183256 = VECTOR('',#183257,1.); +#183257 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#183258 = ORIENTED_EDGE('',*,*,#183259,.T.); +#183259 = EDGE_CURVE('',#183252,#183260,#183262,.T.); +#183260 = VERTEX_POINT('',#183261); +#183261 = CARTESIAN_POINT('',(170.036941,-92.699546,1.585)); +#183262 = CIRCLE('',#183263,0.675436077441); +#183263 = AXIS2_PLACEMENT_3D('',#183264,#183265,#183266); +#183264 = CARTESIAN_POINT('',(170.70739758405,-92.78141091072,1.585)); +#183265 = DIRECTION('',(0.,0.,-1.)); +#183266 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#183267 = ORIENTED_EDGE('',*,*,#183268,.T.); +#183268 = EDGE_CURVE('',#183260,#183269,#183271,.T.); +#183269 = VERTEX_POINT('',#183270); +#183270 = CARTESIAN_POINT('',(170.084719,-92.514813,1.585)); +#183271 = LINE('',#183272,#183273); +#183272 = CARTESIAN_POINT('',(170.036941,-92.699546,1.585)); +#183273 = VECTOR('',#183274,1.); +#183274 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#183275 = ORIENTED_EDGE('',*,*,#183276,.T.); +#183276 = EDGE_CURVE('',#183269,#183277,#183279,.T.); +#183277 = VERTEX_POINT('',#183278); +#183278 = CARTESIAN_POINT('',(170.139752,-92.412206,1.585)); +#183279 = LINE('',#183280,#183281); +#183280 = CARTESIAN_POINT('',(170.084719,-92.514813,1.585)); +#183281 = VECTOR('',#183282,1.); +#183282 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#183283 = ORIENTED_EDGE('',*,*,#183284,.T.); +#183284 = EDGE_CURVE('',#183277,#183043,#183285,.T.); +#183285 = LINE('',#183286,#183287); +#183286 = CARTESIAN_POINT('',(170.139752,-92.412206,1.585)); +#183287 = VECTOR('',#183288,1.); +#183288 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#183289 = PLANE('',#183290); +#183290 = AXIS2_PLACEMENT_3D('',#183291,#183292,#183293); +#183291 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183292 = DIRECTION('',(0.,0.,1.)); +#183293 = DIRECTION('',(1.,0.,-0.)); +#183294 = SHELL_BASED_SURFACE_MODEL('',(#183295)); +#183295 = OPEN_SHELL('',(#183296)); +#183296 = ADVANCED_FACE('',(#183297),#183357,.T.); +#183297 = FACE_BOUND('',#183298,.F.); +#183298 = EDGE_LOOP('',(#183299,#183310,#183318,#183326,#183334,#183342, + #183351)); +#183299 = ORIENTED_EDGE('',*,*,#183300,.T.); +#183300 = EDGE_CURVE('',#183301,#183303,#183305,.T.); +#183301 = VERTEX_POINT('',#183302); +#183302 = CARTESIAN_POINT('',(118.71165,-92.5831,1.585)); +#183303 = VERTEX_POINT('',#183304); +#183304 = CARTESIAN_POINT('',(118.80694,-92.534576,1.585)); +#183305 = CIRCLE('',#183306,5.999960095073E-02); +#183306 = AXIS2_PLACEMENT_3D('',#183307,#183308,#183309); +#183307 = CARTESIAN_POINT('',(118.77164960094,-92.58309960094,1.585)); +#183308 = DIRECTION('',(0.,0.,-1.)); +#183309 = DIRECTION('',(-0.999999999978,-6.65088742856E-06,-0.)); +#183310 = ORIENTED_EDGE('',*,*,#183311,.T.); +#183311 = EDGE_CURVE('',#183303,#183312,#183314,.T.); +#183312 = VERTEX_POINT('',#183313); +#183313 = CARTESIAN_POINT('',(119.13694,-92.774576,1.585)); +#183314 = LINE('',#183315,#183316); +#183315 = CARTESIAN_POINT('',(118.80694,-92.534576,1.585)); +#183316 = VECTOR('',#183317,1.); +#183317 = DIRECTION('',(0.808736084303,-0.588171697675,0.)); +#183318 = ORIENTED_EDGE('',*,*,#183319,.T.); +#183319 = EDGE_CURVE('',#183312,#183320,#183322,.T.); +#183320 = VERTEX_POINT('',#183321); +#183321 = CARTESIAN_POINT('',(119.160916,-92.813742,1.585)); +#183322 = LINE('',#183323,#183324); +#183323 = CARTESIAN_POINT('',(119.13694,-92.774576,1.585)); +#183324 = VECTOR('',#183325,1.); +#183325 = DIRECTION('',(0.522103432673,-0.852882175679,0.)); +#183326 = ORIENTED_EDGE('',*,*,#183327,.T.); +#183327 = EDGE_CURVE('',#183320,#183328,#183330,.T.); +#183328 = VERTEX_POINT('',#183329); +#183329 = CARTESIAN_POINT('',(119.150174,-92.85839,1.585)); +#183330 = LINE('',#183331,#183332); +#183331 = CARTESIAN_POINT('',(119.160916,-92.813742,1.585)); +#183332 = VECTOR('',#183333,1.); +#183333 = DIRECTION('',(-0.233918140202,-0.972256295266,0.)); +#183334 = ORIENTED_EDGE('',*,*,#183335,.T.); +#183335 = EDGE_CURVE('',#183328,#183336,#183338,.T.); +#183336 = VERTEX_POINT('',#183337); +#183337 = CARTESIAN_POINT('',(118.80694,-93.111624,1.585)); +#183338 = LINE('',#183339,#183340); +#183339 = CARTESIAN_POINT('',(119.150174,-92.85839,1.585)); +#183340 = VECTOR('',#183341,1.); +#183341 = DIRECTION('',(-0.804692108267,-0.593692353743,0.)); +#183342 = ORIENTED_EDGE('',*,*,#183343,.T.); +#183343 = EDGE_CURVE('',#183336,#183344,#183346,.T.); +#183344 = VERTEX_POINT('',#183345); +#183345 = CARTESIAN_POINT('',(118.71165,-93.0631,1.585)); +#183346 = CIRCLE('',#183347,5.999941814203E-02); +#183347 = AXIS2_PLACEMENT_3D('',#183348,#183349,#183350); +#183348 = CARTESIAN_POINT('',(118.77164941813,-93.06310075805,1.585)); +#183349 = DIRECTION('',(-0.,0.,-1.)); +#183350 = DIRECTION('',(0.588182068353,-0.80872854189,-0.)); +#183351 = ORIENTED_EDGE('',*,*,#183352,.T.); +#183352 = EDGE_CURVE('',#183344,#183301,#183353,.T.); +#183353 = LINE('',#183354,#183355); +#183354 = CARTESIAN_POINT('',(118.71165,-93.0631,1.585)); +#183355 = VECTOR('',#183356,1.); +#183356 = DIRECTION('',(0.,1.,0.)); +#183357 = PLANE('',#183358); +#183358 = AXIS2_PLACEMENT_3D('',#183359,#183360,#183361); +#183359 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183360 = DIRECTION('',(0.,0.,1.)); +#183361 = DIRECTION('',(1.,0.,-0.)); +#183362 = SHELL_BASED_SURFACE_MODEL('',(#183363)); +#183363 = OPEN_SHELL('',(#183364)); +#183364 = ADVANCED_FACE('',(#183365),#183451,.T.); +#183365 = FACE_BOUND('',#183366,.F.); +#183366 = EDGE_LOOP('',(#183367,#183378,#183386,#183395,#183403,#183411, + #183419,#183428,#183436,#183445)); +#183367 = ORIENTED_EDGE('',*,*,#183368,.T.); +#183368 = EDGE_CURVE('',#183369,#183371,#183373,.T.); +#183369 = VERTEX_POINT('',#183370); +#183370 = CARTESIAN_POINT('',(201.355,-91.14,1.585)); +#183371 = VERTEX_POINT('',#183372); +#183372 = CARTESIAN_POINT('',(201.415,-91.08,1.585)); +#183373 = CIRCLE('',#183374,5.999932016265E-02); +#183374 = AXIS2_PLACEMENT_3D('',#183375,#183376,#183377); +#183375 = CARTESIAN_POINT('',(201.41499932015,-91.13999932015,1.585)); +#183376 = DIRECTION('',(0.,0.,-1.)); +#183377 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#183378 = ORIENTED_EDGE('',*,*,#183379,.T.); +#183379 = EDGE_CURVE('',#183371,#183380,#183382,.T.); +#183380 = VERTEX_POINT('',#183381); +#183381 = CARTESIAN_POINT('',(204.1,-91.08,1.585)); +#183382 = LINE('',#183383,#183384); +#183383 = CARTESIAN_POINT('',(201.415,-91.08,1.585)); +#183384 = VECTOR('',#183385,1.); +#183385 = DIRECTION('',(1.,0.,0.)); +#183386 = ORIENTED_EDGE('',*,*,#183387,.T.); +#183387 = EDGE_CURVE('',#183380,#183388,#183390,.T.); +#183388 = VERTEX_POINT('',#183389); +#183389 = CARTESIAN_POINT('',(204.1,-91.2,1.585)); +#183390 = CIRCLE('',#183391,6.000000000043E-02); +#183391 = AXIS2_PLACEMENT_3D('',#183392,#183393,#183394); +#183392 = CARTESIAN_POINT('',(204.10000022558,-91.14,1.585)); +#183393 = DIRECTION('',(0.,0.,-1.)); +#183394 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#183395 = ORIENTED_EDGE('',*,*,#183396,.T.); +#183396 = EDGE_CURVE('',#183388,#183397,#183399,.T.); +#183397 = VERTEX_POINT('',#183398); +#183398 = CARTESIAN_POINT('',(201.475,-91.2,1.585)); +#183399 = LINE('',#183400,#183401); +#183400 = CARTESIAN_POINT('',(204.1,-91.2,1.585)); +#183401 = VECTOR('',#183402,1.); +#183402 = DIRECTION('',(-1.,0.,0.)); +#183403 = ORIENTED_EDGE('',*,*,#183404,.T.); +#183404 = EDGE_CURVE('',#183397,#183405,#183407,.T.); +#183405 = VERTEX_POINT('',#183406); +#183406 = CARTESIAN_POINT('',(201.475,-93.,1.585)); +#183407 = LINE('',#183408,#183409); +#183408 = CARTESIAN_POINT('',(201.475,-91.2,1.585)); +#183409 = VECTOR('',#183410,1.); +#183410 = DIRECTION('',(0.,-1.,0.)); +#183411 = ORIENTED_EDGE('',*,*,#183412,.T.); +#183412 = EDGE_CURVE('',#183405,#183413,#183415,.T.); +#183413 = VERTEX_POINT('',#183414); +#183414 = CARTESIAN_POINT('',(204.1,-93.,1.585)); +#183415 = LINE('',#183416,#183417); +#183416 = CARTESIAN_POINT('',(201.475,-93.,1.585)); +#183417 = VECTOR('',#183418,1.); +#183418 = DIRECTION('',(1.,0.,0.)); +#183419 = ORIENTED_EDGE('',*,*,#183420,.T.); +#183420 = EDGE_CURVE('',#183413,#183421,#183423,.T.); +#183421 = VERTEX_POINT('',#183422); +#183422 = CARTESIAN_POINT('',(204.1,-93.12,1.585)); +#183423 = CIRCLE('',#183424,6.000000000042E-02); +#183424 = AXIS2_PLACEMENT_3D('',#183425,#183426,#183427); +#183425 = CARTESIAN_POINT('',(204.10000022558,-93.06,1.585)); +#183426 = DIRECTION('',(0.,0.,-1.)); +#183427 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#183428 = ORIENTED_EDGE('',*,*,#183429,.T.); +#183429 = EDGE_CURVE('',#183421,#183430,#183432,.T.); +#183430 = VERTEX_POINT('',#183431); +#183431 = CARTESIAN_POINT('',(201.415,-93.12,1.585)); +#183432 = LINE('',#183433,#183434); +#183433 = CARTESIAN_POINT('',(204.1,-93.12,1.585)); +#183434 = VECTOR('',#183435,1.); +#183435 = DIRECTION('',(-1.,0.,0.)); +#183436 = ORIENTED_EDGE('',*,*,#183437,.T.); +#183437 = EDGE_CURVE('',#183430,#183438,#183440,.T.); +#183438 = VERTEX_POINT('',#183439); +#183439 = CARTESIAN_POINT('',(201.355,-93.06,1.585)); +#183440 = CIRCLE('',#183441,5.999932016268E-02); +#183441 = AXIS2_PLACEMENT_3D('',#183442,#183443,#183444); +#183442 = CARTESIAN_POINT('',(201.41499932015,-93.06000067984,1.585)); +#183443 = DIRECTION('',(0.,0.,-1.)); +#183444 = DIRECTION('',(1.133081470031E-05,-0.999999999936,0.)); +#183445 = ORIENTED_EDGE('',*,*,#183446,.T.); +#183446 = EDGE_CURVE('',#183438,#183369,#183447,.T.); +#183447 = LINE('',#183448,#183449); +#183448 = CARTESIAN_POINT('',(201.355,-93.06,1.585)); +#183449 = VECTOR('',#183450,1.); +#183450 = DIRECTION('',(0.,1.,0.)); +#183451 = PLANE('',#183452); +#183452 = AXIS2_PLACEMENT_3D('',#183453,#183454,#183455); +#183453 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183454 = DIRECTION('',(0.,0.,1.)); +#183455 = DIRECTION('',(1.,0.,-0.)); +#183456 = SHELL_BASED_SURFACE_MODEL('',(#183457)); +#183457 = OPEN_SHELL('',(#183458)); +#183458 = ADVANCED_FACE('',(#183459),#183520,.T.); +#183459 = FACE_BOUND('',#183460,.F.); +#183460 = EDGE_LOOP('',(#183461,#183472,#183480,#183489,#183497,#183505, + #183514)); +#183461 = ORIENTED_EDGE('',*,*,#183462,.T.); +#183462 = EDGE_CURVE('',#183463,#183465,#183467,.T.); +#183463 = VERTEX_POINT('',#183464); +#183464 = CARTESIAN_POINT('',(119.57165,-91.7131,1.585)); +#183465 = VERTEX_POINT('',#183466); +#183466 = CARTESIAN_POINT('',(119.63165,-91.6531,1.585)); +#183467 = CIRCLE('',#183468,5.999932016258E-02); +#183468 = AXIS2_PLACEMENT_3D('',#183469,#183470,#183471); +#183469 = CARTESIAN_POINT('',(119.63164932015,-91.71309932015,1.585)); +#183470 = DIRECTION('',(0.,0.,-1.)); +#183471 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#183472 = ORIENTED_EDGE('',*,*,#183473,.T.); +#183473 = EDGE_CURVE('',#183465,#183474,#183476,.T.); +#183474 = VERTEX_POINT('',#183475); +#183475 = CARTESIAN_POINT('',(120.35665,-91.6531,1.585)); +#183476 = LINE('',#183477,#183478); +#183477 = CARTESIAN_POINT('',(119.63165,-91.6531,1.585)); +#183478 = VECTOR('',#183479,1.); +#183479 = DIRECTION('',(1.,0.,0.)); +#183480 = ORIENTED_EDGE('',*,*,#183481,.T.); +#183481 = EDGE_CURVE('',#183474,#183482,#183484,.T.); +#183482 = VERTEX_POINT('',#183483); +#183483 = CARTESIAN_POINT('',(120.35665,-91.7731,1.585)); +#183484 = CIRCLE('',#183485,6.000000000042E-02); +#183485 = AXIS2_PLACEMENT_3D('',#183486,#183487,#183488); +#183486 = CARTESIAN_POINT('',(120.35665022558,-91.7131,1.585)); +#183487 = DIRECTION('',(0.,0.,-1.)); +#183488 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#183489 = ORIENTED_EDGE('',*,*,#183490,.T.); +#183490 = EDGE_CURVE('',#183482,#183491,#183493,.T.); +#183491 = VERTEX_POINT('',#183492); +#183492 = CARTESIAN_POINT('',(119.69165,-91.7731,1.585)); +#183493 = LINE('',#183494,#183495); +#183494 = CARTESIAN_POINT('',(120.35665,-91.7731,1.585)); +#183495 = VECTOR('',#183496,1.); +#183496 = DIRECTION('',(-1.,0.,0.)); +#183497 = ORIENTED_EDGE('',*,*,#183498,.T.); +#183498 = EDGE_CURVE('',#183491,#183499,#183501,.T.); +#183499 = VERTEX_POINT('',#183500); +#183500 = CARTESIAN_POINT('',(119.69165,-92.4381,1.585)); +#183501 = LINE('',#183502,#183503); +#183502 = CARTESIAN_POINT('',(119.69165,-91.7731,1.585)); +#183503 = VECTOR('',#183504,1.); +#183504 = DIRECTION('',(0.,-1.,0.)); +#183505 = ORIENTED_EDGE('',*,*,#183506,.T.); +#183506 = EDGE_CURVE('',#183499,#183507,#183509,.T.); +#183507 = VERTEX_POINT('',#183508); +#183508 = CARTESIAN_POINT('',(119.57165,-92.4381,1.585)); +#183509 = CIRCLE('',#183510,6.000000000042E-02); +#183510 = AXIS2_PLACEMENT_3D('',#183511,#183512,#183513); +#183511 = CARTESIAN_POINT('',(119.63165,-92.43810022558,1.585)); +#183512 = DIRECTION('',(0.,0.,-1.)); +#183513 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#183514 = ORIENTED_EDGE('',*,*,#183515,.T.); +#183515 = EDGE_CURVE('',#183507,#183463,#183516,.T.); +#183516 = LINE('',#183517,#183518); +#183517 = CARTESIAN_POINT('',(119.57165,-92.4381,1.585)); +#183518 = VECTOR('',#183519,1.); +#183519 = DIRECTION('',(0.,1.,0.)); +#183520 = PLANE('',#183521); +#183521 = AXIS2_PLACEMENT_3D('',#183522,#183523,#183524); +#183522 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183523 = DIRECTION('',(0.,0.,1.)); +#183524 = DIRECTION('',(1.,0.,-0.)); +#183525 = SHELL_BASED_SURFACE_MODEL('',(#183526)); +#183526 = OPEN_SHELL('',(#183527)); +#183527 = ADVANCED_FACE('',(#183528),#183589,.T.); +#183528 = FACE_BOUND('',#183529,.F.); +#183529 = EDGE_LOOP('',(#183530,#183541,#183549,#183558,#183566,#183575, + #183583)); +#183530 = ORIENTED_EDGE('',*,*,#183531,.T.); +#183531 = EDGE_CURVE('',#183532,#183534,#183536,.T.); +#183532 = VERTEX_POINT('',#183533); +#183533 = CARTESIAN_POINT('',(123.12665,-91.7731,1.585)); +#183534 = VERTEX_POINT('',#183535); +#183535 = CARTESIAN_POINT('',(123.12665,-91.6531,1.585)); +#183536 = CIRCLE('',#183537,6.000000000043E-02); +#183537 = AXIS2_PLACEMENT_3D('',#183538,#183539,#183540); +#183538 = CARTESIAN_POINT('',(123.12664977441,-91.7131,1.585)); +#183539 = DIRECTION('',(0.,0.,-1.)); +#183540 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#183541 = ORIENTED_EDGE('',*,*,#183542,.T.); +#183542 = EDGE_CURVE('',#183534,#183543,#183545,.T.); +#183543 = VERTEX_POINT('',#183544); +#183544 = CARTESIAN_POINT('',(123.85165,-91.6531,1.585)); +#183545 = LINE('',#183546,#183547); +#183546 = CARTESIAN_POINT('',(123.12665,-91.6531,1.585)); +#183547 = VECTOR('',#183548,1.); +#183548 = DIRECTION('',(1.,0.,0.)); +#183549 = ORIENTED_EDGE('',*,*,#183550,.T.); +#183550 = EDGE_CURVE('',#183543,#183551,#183553,.T.); +#183551 = VERTEX_POINT('',#183552); +#183552 = CARTESIAN_POINT('',(123.91165,-91.7131,1.585)); +#183553 = CIRCLE('',#183554,5.99993201626E-02); +#183554 = AXIS2_PLACEMENT_3D('',#183555,#183556,#183557); +#183555 = CARTESIAN_POINT('',(123.85165067984,-91.71309932015,1.585)); +#183556 = DIRECTION('',(0.,0.,-1.)); +#183557 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#183558 = ORIENTED_EDGE('',*,*,#183559,.T.); +#183559 = EDGE_CURVE('',#183551,#183560,#183562,.T.); +#183560 = VERTEX_POINT('',#183561); +#183561 = CARTESIAN_POINT('',(123.91165,-92.4381,1.585)); +#183562 = LINE('',#183563,#183564); +#183563 = CARTESIAN_POINT('',(123.91165,-91.7131,1.585)); +#183564 = VECTOR('',#183565,1.); +#183565 = DIRECTION('',(0.,-1.,0.)); +#183566 = ORIENTED_EDGE('',*,*,#183567,.T.); +#183567 = EDGE_CURVE('',#183560,#183568,#183570,.T.); +#183568 = VERTEX_POINT('',#183569); +#183569 = CARTESIAN_POINT('',(123.79165,-92.4381,1.585)); +#183570 = CIRCLE('',#183571,6.000000000042E-02); +#183571 = AXIS2_PLACEMENT_3D('',#183572,#183573,#183574); +#183572 = CARTESIAN_POINT('',(123.85165,-92.43810022558,1.585)); +#183573 = DIRECTION('',(0.,0.,-1.)); +#183574 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#183575 = ORIENTED_EDGE('',*,*,#183576,.T.); +#183576 = EDGE_CURVE('',#183568,#183577,#183579,.T.); +#183577 = VERTEX_POINT('',#183578); +#183578 = CARTESIAN_POINT('',(123.79165,-91.7731,1.585)); +#183579 = LINE('',#183580,#183581); +#183580 = CARTESIAN_POINT('',(123.79165,-92.4381,1.585)); +#183581 = VECTOR('',#183582,1.); +#183582 = DIRECTION('',(0.,1.,0.)); +#183583 = ORIENTED_EDGE('',*,*,#183584,.T.); +#183584 = EDGE_CURVE('',#183577,#183532,#183585,.T.); +#183585 = LINE('',#183586,#183587); +#183586 = CARTESIAN_POINT('',(123.79165,-91.7731,1.585)); +#183587 = VECTOR('',#183588,1.); +#183588 = DIRECTION('',(-1.,0.,0.)); +#183589 = PLANE('',#183590); +#183590 = AXIS2_PLACEMENT_3D('',#183591,#183592,#183593); +#183591 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183592 = DIRECTION('',(0.,0.,1.)); +#183593 = DIRECTION('',(1.,0.,-0.)); +#183594 = SHELL_BASED_SURFACE_MODEL('',(#183595)); +#183595 = OPEN_SHELL('',(#183596)); +#183596 = ADVANCED_FACE('',(#183597,#183682),#183741,.T.); +#183597 = FACE_BOUND('',#183598,.F.); +#183598 = EDGE_LOOP('',(#183599,#183610,#183618,#183626,#183634,#183643, + #183651,#183660,#183668,#183676)); +#183599 = ORIENTED_EDGE('',*,*,#183600,.T.); +#183600 = EDGE_CURVE('',#183601,#183603,#183605,.T.); +#183601 = VERTEX_POINT('',#183602); +#183602 = CARTESIAN_POINT('',(206.151866,-91.724267,1.585)); +#183603 = VERTEX_POINT('',#183604); +#183604 = CARTESIAN_POINT('',(206.635776,-91.795163,1.585)); +#183605 = CIRCLE('',#183606,0.34461174713); +#183606 = AXIS2_PLACEMENT_3D('',#183607,#183608,#183609); +#183607 = CARTESIAN_POINT('',(206.35862294377,-91.99996397579,1.585)); +#183608 = DIRECTION('',(0.,0.,-1.)); +#183609 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#183610 = ORIENTED_EDGE('',*,*,#183611,.T.); +#183611 = EDGE_CURVE('',#183603,#183612,#183614,.T.); +#183612 = VERTEX_POINT('',#183613); +#183613 = CARTESIAN_POINT('',(206.693837,-91.91561,1.585)); +#183614 = LINE('',#183615,#183616); +#183615 = CARTESIAN_POINT('',(206.635776,-91.795163,1.585)); +#183616 = VECTOR('',#183617,1.); +#183617 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#183618 = ORIENTED_EDGE('',*,*,#183619,.T.); +#183619 = EDGE_CURVE('',#183612,#183620,#183622,.T.); +#183620 = VERTEX_POINT('',#183621); +#183621 = CARTESIAN_POINT('',(206.695278,-92.236194,1.585)); +#183622 = LINE('',#183623,#183624); +#183623 = CARTESIAN_POINT('',(206.693837,-91.91561,1.585)); +#183624 = VECTOR('',#183625,1.); +#183625 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#183626 = ORIENTED_EDGE('',*,*,#183627,.T.); +#183627 = EDGE_CURVE('',#183620,#183628,#183630,.T.); +#183628 = VERTEX_POINT('',#183629); +#183629 = CARTESIAN_POINT('',(207.111101,-92.237635,1.585)); +#183630 = LINE('',#183631,#183632); +#183631 = CARTESIAN_POINT('',(206.695278,-92.236194,1.585)); +#183632 = VECTOR('',#183633,1.); +#183633 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#183634 = ORIENTED_EDGE('',*,*,#183635,.T.); +#183635 = EDGE_CURVE('',#183628,#183636,#183638,.T.); +#183636 = VERTEX_POINT('',#183637); +#183637 = CARTESIAN_POINT('',(207.096469,-92.386194,1.585)); +#183638 = CIRCLE('',#183639,7.500006711464E-02); +#183639 = AXIS2_PLACEMENT_3D('',#183640,#183641,#183642); +#183640 = CARTESIAN_POINT('',(207.09646906711,-92.31119393288,1.585)); +#183641 = DIRECTION('',(0.,0.,-1.)); +#183642 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#183643 = ORIENTED_EDGE('',*,*,#183644,.T.); +#183644 = EDGE_CURVE('',#183636,#183645,#183647,.T.); +#183645 = VERTEX_POINT('',#183646); +#183646 = CARTESIAN_POINT('',(206.081837,-92.384753,1.585)); +#183647 = LINE('',#183648,#183649); +#183648 = CARTESIAN_POINT('',(207.096469,-92.386194,1.585)); +#183649 = VECTOR('',#183650,1.); +#183650 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#183651 = ORIENTED_EDGE('',*,*,#183652,.T.); +#183652 = EDGE_CURVE('',#183645,#183653,#183655,.T.); +#183653 = VERTEX_POINT('',#183654); +#183654 = CARTESIAN_POINT('',(206.021469,-92.311194,1.585)); +#183655 = CIRCLE('',#183656,7.500074938985E-02); +#183656 = AXIS2_PLACEMENT_3D('',#183657,#183658,#183659); +#183657 = CARTESIAN_POINT('',(206.09646974938,-92.31119353389,1.585)); +#183658 = DIRECTION('',(0.,0.,-1.)); +#183659 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#183660 = ORIENTED_EDGE('',*,*,#183661,.T.); +#183661 = EDGE_CURVE('',#183653,#183662,#183664,.T.); +#183662 = VERTEX_POINT('',#183663); +#183663 = CARTESIAN_POINT('',(206.024132,-91.910433,1.585)); +#183664 = LINE('',#183665,#183666); +#183665 = CARTESIAN_POINT('',(206.021469,-92.311194,1.585)); +#183666 = VECTOR('',#183667,1.); +#183667 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#183668 = ORIENTED_EDGE('',*,*,#183669,.T.); +#183669 = EDGE_CURVE('',#183662,#183670,#183672,.T.); +#183670 = VERTEX_POINT('',#183671); +#183671 = CARTESIAN_POINT('',(206.086336,-91.78772,1.585)); +#183672 = LINE('',#183673,#183674); +#183673 = CARTESIAN_POINT('',(206.024132,-91.910433,1.585)); +#183674 = VECTOR('',#183675,1.); +#183675 = DIRECTION('',(0.452134906199,0.891949565052,0.)); +#183676 = ORIENTED_EDGE('',*,*,#183677,.T.); +#183677 = EDGE_CURVE('',#183670,#183601,#183678,.T.); +#183678 = LINE('',#183679,#183680); +#183679 = CARTESIAN_POINT('',(206.086336,-91.78772,1.585)); +#183680 = VECTOR('',#183681,1.); +#183681 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#183682 = FACE_BOUND('',#183683,.F.); +#183683 = EDGE_LOOP('',(#183684,#183695,#183703,#183711,#183719,#183727, + #183735)); +#183684 = ORIENTED_EDGE('',*,*,#183685,.T.); +#183685 = EDGE_CURVE('',#183686,#183688,#183690,.T.); +#183686 = VERTEX_POINT('',#183687); +#183687 = CARTESIAN_POINT('',(206.480613,-91.849024,1.585)); +#183688 = VERTEX_POINT('',#183689); +#183689 = CARTESIAN_POINT('',(206.205727,-91.879431,1.585)); +#183690 = CIRCLE('',#183691,0.198386215365); +#183691 = AXIS2_PLACEMENT_3D('',#183692,#183693,#183694); +#183692 = CARTESIAN_POINT('',(206.35880995783,-92.0056161753,1.585)); +#183693 = DIRECTION('',(0.,0.,1.)); +#183694 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#183695 = ORIENTED_EDGE('',*,*,#183696,.T.); +#183696 = EDGE_CURVE('',#183688,#183697,#183699,.T.); +#183697 = VERTEX_POINT('',#183698); +#183698 = CARTESIAN_POINT('',(206.171469,-91.947947,1.585)); +#183699 = LINE('',#183700,#183701); +#183700 = CARTESIAN_POINT('',(206.205727,-91.879431,1.585)); +#183701 = VECTOR('',#183702,1.); +#183702 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#183703 = ORIENTED_EDGE('',*,*,#183704,.T.); +#183704 = EDGE_CURVE('',#183697,#183705,#183707,.T.); +#183705 = VERTEX_POINT('',#183706); +#183706 = CARTESIAN_POINT('',(206.171469,-92.236194,1.585)); +#183707 = LINE('',#183708,#183709); +#183708 = CARTESIAN_POINT('',(206.171469,-91.947947,1.585)); +#183709 = VECTOR('',#183710,1.); +#183710 = DIRECTION('',(0.,-1.,0.)); +#183711 = ORIENTED_EDGE('',*,*,#183712,.T.); +#183712 = EDGE_CURVE('',#183705,#183713,#183715,.T.); +#183713 = VERTEX_POINT('',#183714); +#183714 = CARTESIAN_POINT('',(206.545278,-92.236194,1.585)); +#183715 = LINE('',#183716,#183717); +#183716 = CARTESIAN_POINT('',(206.171469,-92.236194,1.585)); +#183717 = VECTOR('',#183718,1.); +#183718 = DIRECTION('',(1.,0.,0.)); +#183719 = ORIENTED_EDGE('',*,*,#183720,.T.); +#183720 = EDGE_CURVE('',#183713,#183721,#183723,.T.); +#183721 = VERTEX_POINT('',#183722); +#183722 = CARTESIAN_POINT('',(206.545278,-91.947947,1.585)); +#183723 = LINE('',#183724,#183725); +#183724 = CARTESIAN_POINT('',(206.545278,-92.236194,1.585)); +#183725 = VECTOR('',#183726,1.); +#183726 = DIRECTION('',(0.,1.,0.)); +#183727 = ORIENTED_EDGE('',*,*,#183728,.T.); +#183728 = EDGE_CURVE('',#183721,#183729,#183731,.T.); +#183729 = VERTEX_POINT('',#183730); +#183730 = CARTESIAN_POINT('',(206.51102,-91.879431,1.585)); +#183731 = LINE('',#183732,#183733); +#183732 = CARTESIAN_POINT('',(206.545278,-91.947947,1.585)); +#183733 = VECTOR('',#183734,1.); +#183734 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#183735 = ORIENTED_EDGE('',*,*,#183736,.T.); +#183736 = EDGE_CURVE('',#183729,#183686,#183737,.T.); +#183737 = LINE('',#183738,#183739); +#183738 = CARTESIAN_POINT('',(206.51102,-91.879431,1.585)); +#183739 = VECTOR('',#183740,1.); +#183740 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#183741 = PLANE('',#183742); +#183742 = AXIS2_PLACEMENT_3D('',#183743,#183744,#183745); +#183743 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183744 = DIRECTION('',(0.,0.,1.)); +#183745 = DIRECTION('',(1.,0.,-0.)); +#183746 = SHELL_BASED_SURFACE_MODEL('',(#183747)); +#183747 = OPEN_SHELL('',(#183748)); +#183748 = ADVANCED_FACE('',(#183749),#183785,.T.); +#183749 = FACE_BOUND('',#183750,.F.); +#183750 = EDGE_LOOP('',(#183751,#183762,#183770,#183779)); +#183751 = ORIENTED_EDGE('',*,*,#183752,.T.); +#183752 = EDGE_CURVE('',#183753,#183755,#183757,.T.); +#183753 = VERTEX_POINT('',#183754); +#183754 = CARTESIAN_POINT('',(134.629392,-91.9056,1.585)); +#183755 = VERTEX_POINT('',#183756); +#183756 = CARTESIAN_POINT('',(134.629392,-91.7856,1.585)); +#183757 = CIRCLE('',#183758,6.000000000043E-02); +#183758 = AXIS2_PLACEMENT_3D('',#183759,#183760,#183761); +#183759 = CARTESIAN_POINT('',(134.62939177441,-91.8456,1.585)); +#183760 = DIRECTION('',(0.,0.,-1.)); +#183761 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#183762 = ORIENTED_EDGE('',*,*,#183763,.T.); +#183763 = EDGE_CURVE('',#183755,#183764,#183766,.T.); +#183764 = VERTEX_POINT('',#183765); +#183765 = CARTESIAN_POINT('',(135.103908,-91.7856,1.585)); +#183766 = LINE('',#183767,#183768); +#183767 = CARTESIAN_POINT('',(134.629392,-91.7856,1.585)); +#183768 = VECTOR('',#183769,1.); +#183769 = DIRECTION('',(1.,0.,0.)); +#183770 = ORIENTED_EDGE('',*,*,#183771,.T.); +#183771 = EDGE_CURVE('',#183764,#183772,#183774,.T.); +#183772 = VERTEX_POINT('',#183773); +#183773 = CARTESIAN_POINT('',(135.103908,-91.9056,1.585)); +#183774 = CIRCLE('',#183775,6.000000000043E-02); +#183775 = AXIS2_PLACEMENT_3D('',#183776,#183777,#183778); +#183776 = CARTESIAN_POINT('',(135.10390822558,-91.8456,1.585)); +#183777 = DIRECTION('',(0.,0.,-1.)); +#183778 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#183779 = ORIENTED_EDGE('',*,*,#183780,.T.); +#183780 = EDGE_CURVE('',#183772,#183753,#183781,.T.); +#183781 = LINE('',#183782,#183783); +#183782 = CARTESIAN_POINT('',(135.103908,-91.9056,1.585)); +#183783 = VECTOR('',#183784,1.); +#183784 = DIRECTION('',(-1.,0.,0.)); +#183785 = PLANE('',#183786); +#183786 = AXIS2_PLACEMENT_3D('',#183787,#183788,#183789); +#183787 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183788 = DIRECTION('',(0.,0.,1.)); +#183789 = DIRECTION('',(1.,0.,-0.)); +#183790 = SHELL_BASED_SURFACE_MODEL('',(#183791)); +#183791 = OPEN_SHELL('',(#183792)); +#183792 = ADVANCED_FACE('',(#183793,#183846),#183872,.T.); +#183793 = FACE_BOUND('',#183794,.F.); +#183794 = EDGE_LOOP('',(#183795,#183806,#183814,#183823,#183831,#183840) + ); +#183795 = ORIENTED_EDGE('',*,*,#183796,.T.); +#183796 = EDGE_CURVE('',#183797,#183799,#183801,.T.); +#183797 = VERTEX_POINT('',#183798); +#183798 = CARTESIAN_POINT('',(140.149224,-91.480674,1.585)); +#183799 = VERTEX_POINT('',#183800); +#183800 = CARTESIAN_POINT('',(140.234076,-91.480674,1.585)); +#183801 = CIRCLE('',#183802,5.999686798802E-02); +#183802 = AXIS2_PLACEMENT_3D('',#183803,#183804,#183805); +#183803 = CARTESIAN_POINT('',(140.19165,-91.52309638433,1.585)); +#183804 = DIRECTION('',(0.,0.,-1.)); +#183805 = DIRECTION('',(-0.707136912688,0.707076648401,0.)); +#183806 = ORIENTED_EDGE('',*,*,#183807,.T.); +#183807 = EDGE_CURVE('',#183799,#183808,#183810,.T.); +#183808 = VERTEX_POINT('',#183809); +#183809 = CARTESIAN_POINT('',(140.534076,-91.780674,1.585)); +#183810 = LINE('',#183811,#183812); +#183811 = CARTESIAN_POINT('',(140.234076,-91.480674,1.585)); +#183812 = VECTOR('',#183813,1.); +#183813 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183814 = ORIENTED_EDGE('',*,*,#183815,.T.); +#183815 = EDGE_CURVE('',#183808,#183816,#183818,.T.); +#183816 = VERTEX_POINT('',#183817); +#183817 = CARTESIAN_POINT('',(140.49165,-91.8831,1.585)); +#183818 = CIRCLE('',#183819,5.999940475497E-02); +#183819 = AXIS2_PLACEMENT_3D('',#183820,#183821,#183822); +#183820 = CARTESIAN_POINT('',(140.49165062331,-91.82310059524,1.585)); +#183821 = DIRECTION('',(0.,0.,-1.)); +#183822 = DIRECTION('',(0.707096626292,0.707116935935,0.)); +#183823 = ORIENTED_EDGE('',*,*,#183824,.T.); +#183824 = EDGE_CURVE('',#183816,#183825,#183827,.T.); +#183825 = VERTEX_POINT('',#183826); +#183826 = CARTESIAN_POINT('',(139.89165,-91.8831,1.585)); +#183827 = LINE('',#183828,#183829); +#183828 = CARTESIAN_POINT('',(140.49165,-91.8831,1.585)); +#183829 = VECTOR('',#183830,1.); +#183830 = DIRECTION('',(-1.,0.,0.)); +#183831 = ORIENTED_EDGE('',*,*,#183832,.T.); +#183832 = EDGE_CURVE('',#183825,#183833,#183835,.T.); +#183833 = VERTEX_POINT('',#183834); +#183834 = CARTESIAN_POINT('',(139.849224,-91.780674,1.585)); +#183835 = CIRCLE('',#183836,5.999940475496E-02); +#183836 = AXIS2_PLACEMENT_3D('',#183837,#183838,#183839); +#183837 = CARTESIAN_POINT('',(139.89164937668,-91.82310059524,1.585)); +#183838 = DIRECTION('',(0.,0.,-1.)); +#183839 = DIRECTION('',(1.038874045148E-05,-0.999999999946,0.)); +#183840 = ORIENTED_EDGE('',*,*,#183841,.T.); +#183841 = EDGE_CURVE('',#183833,#183797,#183842,.T.); +#183842 = LINE('',#183843,#183844); +#183843 = CARTESIAN_POINT('',(139.849224,-91.780674,1.585)); +#183844 = VECTOR('',#183845,1.); +#183845 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#183846 = FACE_BOUND('',#183847,.F.); +#183847 = EDGE_LOOP('',(#183848,#183858,#183866)); +#183848 = ORIENTED_EDGE('',*,*,#183849,.T.); +#183849 = EDGE_CURVE('',#183850,#183852,#183854,.T.); +#183850 = VERTEX_POINT('',#183851); +#183851 = CARTESIAN_POINT('',(140.036502,-91.7631,1.585)); +#183852 = VERTEX_POINT('',#183853); +#183853 = CARTESIAN_POINT('',(140.346798,-91.7631,1.585)); +#183854 = LINE('',#183855,#183856); +#183855 = CARTESIAN_POINT('',(140.036502,-91.7631,1.585)); +#183856 = VECTOR('',#183857,1.); +#183857 = DIRECTION('',(1.,0.,0.)); +#183858 = ORIENTED_EDGE('',*,*,#183859,.T.); +#183859 = EDGE_CURVE('',#183852,#183860,#183862,.T.); +#183860 = VERTEX_POINT('',#183861); +#183861 = CARTESIAN_POINT('',(140.19165,-91.607952,1.585)); +#183862 = LINE('',#183863,#183864); +#183863 = CARTESIAN_POINT('',(140.346798,-91.7631,1.585)); +#183864 = VECTOR('',#183865,1.); +#183865 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#183866 = ORIENTED_EDGE('',*,*,#183867,.T.); +#183867 = EDGE_CURVE('',#183860,#183850,#183868,.T.); +#183868 = LINE('',#183869,#183870); +#183869 = CARTESIAN_POINT('',(140.19165,-91.607952,1.585)); +#183870 = VECTOR('',#183871,1.); +#183871 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#183872 = PLANE('',#183873); +#183873 = AXIS2_PLACEMENT_3D('',#183874,#183875,#183876); +#183874 = CARTESIAN_POINT('',(0.,0.,1.585)); +#183875 = DIRECTION('',(0.,0.,1.)); +#183876 = DIRECTION('',(1.,0.,-0.)); +#183877 = SHELL_BASED_SURFACE_MODEL('',(#183878)); +#183878 = OPEN_SHELL('',(#183879)); +#183879 = ADVANCED_FACE('',(#183880),#184175,.T.); +#183880 = FACE_BOUND('',#183881,.F.); +#183881 = EDGE_LOOP('',(#183882,#183893,#183901,#183909,#183917,#183925, + #183933,#183941,#183949,#183957,#183965,#183973,#183981,#183989, + #183997,#184005,#184013,#184021,#184029,#184037,#184045,#184053, + #184062,#184070,#184078,#184086,#184094,#184103,#184111,#184119, + #184127,#184136,#184144,#184152,#184160,#184169)); +#183882 = ORIENTED_EDGE('',*,*,#183883,.T.); +#183883 = EDGE_CURVE('',#183884,#183886,#183888,.T.); +#183884 = VERTEX_POINT('',#183885); +#183885 = CARTESIAN_POINT('',(185.8768,-90.737354,1.585)); +#183886 = VERTEX_POINT('',#183887); +#183887 = CARTESIAN_POINT('',(185.963226,-90.650928,1.585)); +#183888 = CIRCLE('',#183889,0.109995194153); +#183889 = AXIS2_PLACEMENT_3D('',#183890,#183891,#183892); +#183890 = CARTESIAN_POINT('',(185.98468221987,-90.75881021987,1.585)); +#183891 = DIRECTION('',(0.,0.,-1.)); +#183892 = DIRECTION('',(-0.980790303675,0.195065066626,0.)); +#183893 = ORIENTED_EDGE('',*,*,#183894,.T.); +#183894 = EDGE_CURVE('',#183886,#183895,#183897,.T.); +#183895 = VERTEX_POINT('',#183896); +#183896 = CARTESIAN_POINT('',(186.539469,-90.650927,1.585)); +#183897 = LINE('',#183898,#183899); +#183898 = CARTESIAN_POINT('',(185.963226,-90.650928,1.585)); +#183899 = VECTOR('',#183900,1.); +#183900 = DIRECTION('',(0.999999999998,1.735378993712E-06,0.)); +#183901 = ORIENTED_EDGE('',*,*,#183902,.T.); +#183902 = EDGE_CURVE('',#183895,#183903,#183905,.T.); +#183903 = VERTEX_POINT('',#183904); +#183904 = CARTESIAN_POINT('',(186.579142,-90.667362,1.585)); +#183905 = LINE('',#183906,#183907); +#183906 = CARTESIAN_POINT('',(186.539469,-90.650927,1.585)); +#183907 = VECTOR('',#183908,1.); +#183908 = DIRECTION('',(0.923863844716,-0.382721303857,0.)); +#183909 = ORIENTED_EDGE('',*,*,#183910,.T.); +#183910 = EDGE_CURVE('',#183903,#183911,#183913,.T.); +#183911 = VERTEX_POINT('',#183912); +#183912 = CARTESIAN_POINT('',(186.685671,-90.773892,1.585)); +#183913 = LINE('',#183914,#183915); +#183914 = CARTESIAN_POINT('',(186.579142,-90.667362,1.585)); +#183915 = VECTOR('',#183916,1.); +#183916 = DIRECTION('',(0.707103462348,-0.70711010001,0.)); +#183917 = ORIENTED_EDGE('',*,*,#183918,.T.); +#183918 = EDGE_CURVE('',#183911,#183919,#183921,.T.); +#183919 = VERTEX_POINT('',#183920); +#183920 = CARTESIAN_POINT('',(186.698565,-90.80022,1.585)); +#183921 = LINE('',#183922,#183923); +#183922 = CARTESIAN_POINT('',(186.685671,-90.773892,1.585)); +#183923 = VECTOR('',#183924,1.); +#183924 = DIRECTION('',(0.439830392417,-0.898080857109,0.)); +#183925 = ORIENTED_EDGE('',*,*,#183926,.T.); +#183926 = EDGE_CURVE('',#183919,#183927,#183929,.T.); +#183927 = VERTEX_POINT('',#183928); +#183928 = CARTESIAN_POINT('',(186.77933,-91.052715,1.585)); +#183929 = LINE('',#183930,#183931); +#183930 = CARTESIAN_POINT('',(186.698565,-90.80022,1.585)); +#183931 = VECTOR('',#183932,1.); +#183932 = DIRECTION('',(0.304661436668,-0.952460712579,0.)); +#183933 = ORIENTED_EDGE('',*,*,#183934,.T.); +#183934 = EDGE_CURVE('',#183927,#183935,#183937,.T.); +#183935 = VERTEX_POINT('',#183936); +#183936 = CARTESIAN_POINT('',(186.777174,-91.2401,1.585)); +#183937 = LINE('',#183938,#183939); +#183938 = CARTESIAN_POINT('',(186.77933,-91.052715,1.585)); +#183939 = VECTOR('',#183940,1.); +#183940 = DIRECTION('',(-1.150496201248E-02,-0.999933815734,0.)); +#183941 = ORIENTED_EDGE('',*,*,#183942,.T.); +#183942 = EDGE_CURVE('',#183935,#183943,#183945,.T.); +#183943 = VERTEX_POINT('',#183944); +#183944 = CARTESIAN_POINT('',(186.689774,-91.499004,1.585)); +#183945 = LINE('',#183946,#183947); +#183946 = CARTESIAN_POINT('',(186.777174,-91.2401,1.585)); +#183947 = VECTOR('',#183948,1.); +#183948 = DIRECTION('',(-0.319844021338,-0.947470211676,0.)); +#183949 = ORIENTED_EDGE('',*,*,#183950,.T.); +#183950 = EDGE_CURVE('',#183943,#183951,#183953,.T.); +#183951 = VERTEX_POINT('',#183952); +#183952 = CARTESIAN_POINT('',(186.671992,-91.522311,1.585)); +#183953 = LINE('',#183954,#183955); +#183954 = CARTESIAN_POINT('',(186.689774,-91.499004,1.585)); +#183955 = VECTOR('',#183956,1.); +#183956 = DIRECTION('',(-0.606567233014,-0.79503219547,0.)); +#183957 = ORIENTED_EDGE('',*,*,#183958,.T.); +#183958 = EDGE_CURVE('',#183951,#183959,#183961,.T.); +#183959 = VERTEX_POINT('',#183960); +#183960 = CARTESIAN_POINT('',(186.500259,-91.689481,1.585)); +#183961 = LINE('',#183962,#183963); +#183962 = CARTESIAN_POINT('',(186.671992,-91.522311,1.585)); +#183963 = VECTOR('',#183964,1.); +#183964 = DIRECTION('',(-0.71656234147,-0.697523053947,0.)); +#183965 = ORIENTED_EDGE('',*,*,#183966,.T.); +#183966 = EDGE_CURVE('',#183959,#183967,#183969,.T.); +#183967 = VERTEX_POINT('',#183968); +#183968 = CARTESIAN_POINT('',(186.316127,-91.779816,1.585)); +#183969 = LINE('',#183970,#183971); +#183970 = CARTESIAN_POINT('',(186.500259,-91.689481,1.585)); +#183971 = VECTOR('',#183972,1.); +#183972 = DIRECTION('',(-0.897777660506,-0.440448944028,0.)); +#183973 = ORIENTED_EDGE('',*,*,#183974,.T.); +#183974 = EDGE_CURVE('',#183967,#183975,#183977,.T.); +#183975 = VERTEX_POINT('',#183976); +#183976 = CARTESIAN_POINT('',(185.988428,-91.858922,1.585)); +#183977 = LINE('',#183978,#183979); +#183978 = CARTESIAN_POINT('',(186.316127,-91.779816,1.585)); +#183979 = VECTOR('',#183980,1.); +#183980 = DIRECTION('',(-0.972077985498,-0.23465802801,0.)); +#183981 = ORIENTED_EDGE('',*,*,#183982,.T.); +#183982 = EDGE_CURVE('',#183975,#183983,#183985,.T.); +#183983 = VERTEX_POINT('',#183984); +#183984 = CARTESIAN_POINT('',(185.729435,-91.856007,1.585)); +#183985 = LINE('',#183986,#183987); +#183986 = CARTESIAN_POINT('',(185.988428,-91.858922,1.585)); +#183987 = VECTOR('',#183988,1.); +#183988 = DIRECTION('',(-0.999936667036,1.125441762678E-02,0.)); +#183989 = ORIENTED_EDGE('',*,*,#183990,.T.); +#183990 = EDGE_CURVE('',#183983,#183991,#183993,.T.); +#183991 = VERTEX_POINT('',#183992); +#183992 = CARTESIAN_POINT('',(185.402159,-91.771487,1.585)); +#183993 = LINE('',#183994,#183995); +#183994 = CARTESIAN_POINT('',(185.729435,-91.856007,1.585)); +#183995 = VECTOR('',#183996,1.); +#183996 = DIRECTION('',(-0.968233159705,0.250049092076,0.)); +#183997 = ORIENTED_EDGE('',*,*,#183998,.T.); +#183998 = EDGE_CURVE('',#183991,#183999,#184001,.T.); +#183999 = VERTEX_POINT('',#184000); +#184000 = CARTESIAN_POINT('',(185.229627,-91.681617,1.585)); +#184001 = LINE('',#184002,#184003); +#184002 = CARTESIAN_POINT('',(185.402159,-91.771487,1.585)); +#184003 = VECTOR('',#184004,1.); +#184004 = DIRECTION('',(-0.886893900564,0.461973169288,0.)); +#184005 = ORIENTED_EDGE('',*,*,#184006,.T.); +#184006 = EDGE_CURVE('',#183999,#184007,#184009,.T.); +#184007 = VERTEX_POINT('',#184008); +#184008 = CARTESIAN_POINT('',(185.055129,-91.505641,1.585)); +#184009 = LINE('',#184010,#184011); +#184010 = CARTESIAN_POINT('',(185.229627,-91.681617,1.585)); +#184011 = VECTOR('',#184012,1.); +#184012 = DIRECTION('',(-0.704118547601,0.710082439527,0.)); +#184013 = ORIENTED_EDGE('',*,*,#184014,.T.); +#184014 = EDGE_CURVE('',#184007,#184015,#184017,.T.); +#184015 = VERTEX_POINT('',#184016); +#184016 = CARTESIAN_POINT('',(185.042235,-91.479314,1.585)); +#184017 = LINE('',#184018,#184019); +#184018 = CARTESIAN_POINT('',(185.055129,-91.505641,1.585)); +#184019 = VECTOR('',#184020,1.); +#184020 = DIRECTION('',(-0.439843866833,0.898074257959,0.)); +#184021 = ORIENTED_EDGE('',*,*,#184022,.T.); +#184022 = EDGE_CURVE('',#184015,#184023,#184025,.T.); +#184023 = VERTEX_POINT('',#184024); +#184024 = CARTESIAN_POINT('',(184.961469,-91.226817,1.585)); +#184025 = LINE('',#184026,#184027); +#184026 = CARTESIAN_POINT('',(185.042235,-91.479314,1.585)); +#184027 = VECTOR('',#184028,1.); +#184028 = DIRECTION('',(-0.304662669507,0.952460318233,0.)); +#184029 = ORIENTED_EDGE('',*,*,#184030,.T.); +#184030 = EDGE_CURVE('',#184023,#184031,#184033,.T.); +#184031 = VERTEX_POINT('',#184032); +#184032 = CARTESIAN_POINT('',(184.962514,-90.965926,1.585)); +#184033 = LINE('',#184034,#184035); +#184034 = CARTESIAN_POINT('',(184.961469,-91.226817,1.585)); +#184035 = VECTOR('',#184036,1.); +#184036 = DIRECTION('',(4.005472082526E-03,0.999991978065,0.)); +#184037 = ORIENTED_EDGE('',*,*,#184038,.T.); +#184038 = EDGE_CURVE('',#184031,#184039,#184041,.T.); +#184039 = VERTEX_POINT('',#184040); +#184040 = CARTESIAN_POINT('',(184.972013,-90.938193,1.585)); +#184041 = LINE('',#184042,#184043); +#184042 = CARTESIAN_POINT('',(184.962514,-90.965926,1.585)); +#184043 = VECTOR('',#184044,1.); +#184044 = DIRECTION('',(0.324035635352,0.946044875797,0.)); +#184045 = ORIENTED_EDGE('',*,*,#184046,.T.); +#184046 = EDGE_CURVE('',#184039,#184047,#184049,.T.); +#184047 = VERTEX_POINT('',#184048); +#184048 = CARTESIAN_POINT('',(185.059691,-90.767563,1.585)); +#184049 = LINE('',#184050,#184051); +#184050 = CARTESIAN_POINT('',(184.972013,-90.938193,1.585)); +#184051 = VECTOR('',#184052,1.); +#184052 = DIRECTION('',(0.457040572984,0.889445846944,0.)); +#184053 = ORIENTED_EDGE('',*,*,#184054,.T.); +#184054 = EDGE_CURVE('',#184047,#184055,#184057,.T.); +#184055 = VERTEX_POINT('',#184056); +#184056 = CARTESIAN_POINT('',(185.252683,-90.864058,1.585)); +#184057 = CIRCLE('',#184058,0.109999029427); +#184058 = AXIS2_PLACEMENT_3D('',#184059,#184060,#184061); +#184059 = CARTESIAN_POINT('',(185.14659033842,-90.83500402206,1.585)); +#184060 = DIRECTION('',(0.,0.,-1.)); +#184061 = DIRECTION('',(-0.790000956144,0.613105610227,0.)); +#184062 = ORIENTED_EDGE('',*,*,#184063,.T.); +#184063 = EDGE_CURVE('',#184055,#184064,#184066,.T.); +#184064 = VERTEX_POINT('',#184065); +#184065 = CARTESIAN_POINT('',(185.1804,-91.013352,1.585)); +#184066 = LINE('',#184067,#184068); +#184067 = CARTESIAN_POINT('',(185.252683,-90.864058,1.585)); +#184068 = VECTOR('',#184069,1.); +#184069 = DIRECTION('',(-0.435775698604,-0.900055298582,0.)); +#184070 = ORIENTED_EDGE('',*,*,#184071,.T.); +#184071 = EDGE_CURVE('',#184064,#184072,#184074,.T.); +#184072 = VERTEX_POINT('',#184073); +#184073 = CARTESIAN_POINT('',(185.1804,-91.198107,1.585)); +#184074 = LINE('',#184075,#184076); +#184075 = CARTESIAN_POINT('',(185.1804,-91.013352,1.585)); +#184076 = VECTOR('',#184077,1.); +#184077 = DIRECTION('',(0.,-1.,0.)); +#184078 = ORIENTED_EDGE('',*,*,#184079,.T.); +#184079 = EDGE_CURVE('',#184072,#184080,#184082,.T.); +#184080 = VERTEX_POINT('',#184081); +#184081 = CARTESIAN_POINT('',(185.242733,-91.385108,1.585)); +#184082 = LINE('',#184083,#184084); +#184083 = CARTESIAN_POINT('',(185.1804,-91.198107,1.585)); +#184084 = VECTOR('',#184085,1.); +#184085 = DIRECTION('',(0.316224722125,-0.948684312676,0.)); +#184086 = ORIENTED_EDGE('',*,*,#184087,.T.); +#184087 = EDGE_CURVE('',#184080,#184088,#184090,.T.); +#184088 = VERTEX_POINT('',#184089); +#184089 = CARTESIAN_POINT('',(185.364131,-91.506506,1.585)); +#184090 = LINE('',#184091,#184092); +#184091 = CARTESIAN_POINT('',(185.242733,-91.385108,1.585)); +#184092 = VECTOR('',#184093,1.); +#184093 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#184094 = ORIENTED_EDGE('',*,*,#184095,.T.); +#184095 = EDGE_CURVE('',#184088,#184096,#184098,.T.); +#184096 = VERTEX_POINT('',#184097); +#184097 = CARTESIAN_POINT('',(185.971143,-91.639291,1.585)); +#184098 = CIRCLE('',#184099,0.989754923038); +#184099 = AXIS2_PLACEMENT_3D('',#184100,#184101,#184102); +#184100 = CARTESIAN_POINT('',(185.86845581865,-90.65487739258,1.585)); +#184101 = DIRECTION('',(0.,0.,1.)); +#184102 = DIRECTION('',(-0.509545147909,-0.860443921614,0.)); +#184103 = ORIENTED_EDGE('',*,*,#184104,.T.); +#184104 = EDGE_CURVE('',#184096,#184105,#184107,.T.); +#184105 = VERTEX_POINT('',#184106); +#184106 = CARTESIAN_POINT('',(186.251057,-91.569312,1.585)); +#184107 = LINE('',#184108,#184109); +#184108 = CARTESIAN_POINT('',(185.971143,-91.639291,1.585)); +#184109 = VECTOR('',#184110,1.); +#184110 = DIRECTION('',(0.970142092396,0.242537256028,0.)); +#184111 = ORIENTED_EDGE('',*,*,#184112,.T.); +#184112 = EDGE_CURVE('',#184105,#184113,#184115,.T.); +#184113 = VERTEX_POINT('',#184114); +#184114 = CARTESIAN_POINT('',(186.376668,-91.506506,1.585)); +#184115 = LINE('',#184116,#184117); +#184116 = CARTESIAN_POINT('',(186.251057,-91.569312,1.585)); +#184117 = VECTOR('',#184118,1.); +#184118 = DIRECTION('',(0.894425766875,0.447216443738,0.)); +#184119 = ORIENTED_EDGE('',*,*,#184120,.T.); +#184120 = EDGE_CURVE('',#184113,#184121,#184123,.T.); +#184121 = VERTEX_POINT('',#184122); +#184122 = CARTESIAN_POINT('',(186.498066,-91.385108,1.585)); +#184123 = LINE('',#184124,#184125); +#184124 = CARTESIAN_POINT('',(186.376668,-91.506506,1.585)); +#184125 = VECTOR('',#184126,1.); +#184126 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184127 = ORIENTED_EDGE('',*,*,#184128,.T.); +#184128 = EDGE_CURVE('',#184121,#184129,#184131,.T.); +#184129 = VERTEX_POINT('',#184130); +#184130 = CARTESIAN_POINT('',(186.498066,-90.894425,1.585)); +#184131 = CIRCLE('',#184132,0.490171805559); +#184132 = AXIS2_PLACEMENT_3D('',#184133,#184134,#184135); +#184133 = CARTESIAN_POINT('',(186.07371243592,-91.1397665,1.585)); +#184134 = DIRECTION('',(0.,-0.,1.)); +#184135 = DIRECTION('',(0.865724138479,-0.50052144415,-0.)); +#184136 = ORIENTED_EDGE('',*,*,#184137,.T.); +#184137 = EDGE_CURVE('',#184129,#184138,#184140,.T.); +#184138 = VERTEX_POINT('',#184139); +#184139 = CARTESIAN_POINT('',(186.472455,-90.868814,1.585)); +#184140 = LINE('',#184141,#184142); +#184141 = CARTESIAN_POINT('',(186.498066,-90.894425,1.585)); +#184142 = VECTOR('',#184143,1.); +#184143 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184144 = ORIENTED_EDGE('',*,*,#184145,.T.); +#184145 = EDGE_CURVE('',#184138,#184146,#184148,.T.); +#184146 = VERTEX_POINT('',#184147); +#184147 = CARTESIAN_POINT('',(186.094686,-90.868814,1.585)); +#184148 = LINE('',#184149,#184150); +#184149 = CARTESIAN_POINT('',(186.472455,-90.868814,1.585)); +#184150 = VECTOR('',#184151,1.); +#184151 = DIRECTION('',(-1.,0.,0.)); +#184152 = ORIENTED_EDGE('',*,*,#184153,.T.); +#184153 = EDGE_CURVE('',#184146,#184154,#184156,.T.); +#184154 = VERTEX_POINT('',#184155); +#184155 = CARTESIAN_POINT('',(186.092572,-91.085036,1.585)); +#184156 = LINE('',#184157,#184158); +#184157 = CARTESIAN_POINT('',(186.094686,-90.868814,1.585)); +#184158 = VECTOR('',#184159,1.); +#184159 = DIRECTION('',(-9.776521210348E-03,-0.999952208675,0.)); +#184160 = ORIENTED_EDGE('',*,*,#184161,.T.); +#184161 = EDGE_CURVE('',#184154,#184162,#184164,.T.); +#184162 = VERTEX_POINT('',#184163); +#184163 = CARTESIAN_POINT('',(185.8768,-91.085036,1.585)); +#184164 = CIRCLE('',#184165,0.109999639072); +#184165 = AXIS2_PLACEMENT_3D('',#184166,#184167,#184168); +#184166 = CARTESIAN_POINT('',(185.984686,-91.063576,1.585)); +#184167 = DIRECTION('',(-0.,0.,-1.)); +#184168 = DIRECTION('',(0.980785036297,-0.195091549218,-0.)); +#184169 = ORIENTED_EDGE('',*,*,#184170,.T.); +#184170 = EDGE_CURVE('',#184162,#183884,#184171,.T.); +#184171 = LINE('',#184172,#184173); +#184172 = CARTESIAN_POINT('',(185.8768,-91.085036,1.585)); +#184173 = VECTOR('',#184174,1.); +#184174 = DIRECTION('',(0.,1.,0.)); +#184175 = PLANE('',#184176); +#184176 = AXIS2_PLACEMENT_3D('',#184177,#184178,#184179); +#184177 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184178 = DIRECTION('',(0.,0.,1.)); +#184179 = DIRECTION('',(1.,0.,-0.)); +#184180 = SHELL_BASED_SURFACE_MODEL('',(#184181)); +#184181 = OPEN_SHELL('',(#184182)); +#184182 = ADVANCED_FACE('',(#184183),#184377,.T.); +#184183 = FACE_BOUND('',#184184,.F.); +#184184 = EDGE_LOOP('',(#184185,#184196,#184204,#184213,#184221,#184230, + #184238,#184246,#184254,#184263,#184271,#184280,#184288,#184297, + #184305,#184313,#184321,#184330,#184338,#184346,#184355,#184363, + #184371)); +#184185 = ORIENTED_EDGE('',*,*,#184186,.T.); +#184186 = EDGE_CURVE('',#184187,#184189,#184191,.T.); +#184187 = VERTEX_POINT('',#184188); +#184188 = CARTESIAN_POINT('',(206.054801,-90.725025,1.585)); +#184189 = VERTEX_POINT('',#184190); +#184190 = CARTESIAN_POINT('',(206.145857,-90.730942,1.585)); +#184191 = CIRCLE('',#184192,7.499904172406E-02); +#184192 = AXIS2_PLACEMENT_3D('',#184193,#184194,#184195); +#184193 = CARTESIAN_POINT('',(206.09646904495,-90.78738388299,1.585)); +#184194 = DIRECTION('',(0.,0.,-1.)); +#184195 = DIRECTION('',(-0.555581031454,0.831462396918,0.)); +#184196 = ORIENTED_EDGE('',*,*,#184197,.T.); +#184197 = EDGE_CURVE('',#184189,#184198,#184200,.T.); +#184198 = VERTEX_POINT('',#184199); +#184199 = CARTESIAN_POINT('',(206.405166,-90.957837,1.585)); +#184200 = LINE('',#184201,#184202); +#184201 = CARTESIAN_POINT('',(206.145857,-90.730942,1.585)); +#184202 = VECTOR('',#184203,1.); +#184203 = DIRECTION('',(0.752577234061,-0.658503991463,0.)); +#184204 = ORIENTED_EDGE('',*,*,#184205,.T.); +#184205 = EDGE_CURVE('',#184198,#184206,#184208,.T.); +#184206 = VERTEX_POINT('',#184207); +#184207 = CARTESIAN_POINT('',(206.653265,-90.713826,1.585)); +#184208 = CIRCLE('',#184209,0.348517853143); +#184209 = AXIS2_PLACEMENT_3D('',#184210,#184211,#184212); +#184210 = CARTESIAN_POINT('',(206.74096548686,-91.05112900704,1.585)); +#184211 = DIRECTION('',(0.,0.,-1.)); +#184212 = DIRECTION('',(-0.963507274705,0.267682146568,0.)); +#184213 = ORIENTED_EDGE('',*,*,#184214,.T.); +#184214 = EDGE_CURVE('',#184206,#184215,#184217,.T.); +#184215 = VERTEX_POINT('',#184216); +#184216 = CARTESIAN_POINT('',(206.920624,-90.713826,1.585)); +#184217 = LINE('',#184218,#184219); +#184218 = CARTESIAN_POINT('',(206.653265,-90.713826,1.585)); +#184219 = VECTOR('',#184220,1.); +#184220 = DIRECTION('',(1.,0.,0.)); +#184221 = ORIENTED_EDGE('',*,*,#184222,.T.); +#184222 = EDGE_CURVE('',#184215,#184223,#184225,.T.); +#184223 = VERTEX_POINT('',#184224); +#184224 = CARTESIAN_POINT('',(207.170028,-90.963229,1.585)); +#184225 = CIRCLE('',#184226,0.347873191155); +#184226 = AXIS2_PLACEMENT_3D('',#184227,#184228,#184229); +#184227 = CARTESIAN_POINT('',(206.83329493659,-91.05055941356,1.585)); +#184228 = DIRECTION('',(0.,0.,-1.)); +#184229 = DIRECTION('',(0.251037060709,0.967977476055,0.)); +#184230 = ORIENTED_EDGE('',*,*,#184231,.T.); +#184231 = EDGE_CURVE('',#184223,#184232,#184234,.T.); +#184232 = VERTEX_POINT('',#184233); +#184233 = CARTESIAN_POINT('',(207.168806,-91.283385,1.585)); +#184234 = LINE('',#184235,#184236); +#184235 = CARTESIAN_POINT('',(207.170028,-90.963229,1.585)); +#184236 = VECTOR('',#184237,1.); +#184237 = DIRECTION('',(-3.816861463376E-03,-0.999992715758,0.)); +#184238 = ORIENTED_EDGE('',*,*,#184239,.T.); +#184239 = EDGE_CURVE('',#184232,#184240,#184242,.T.); +#184240 = VERTEX_POINT('',#184241); +#184241 = CARTESIAN_POINT('',(207.1066,-91.406097,1.585)); +#184242 = LINE('',#184243,#184244); +#184243 = CARTESIAN_POINT('',(207.168806,-91.283385,1.585)); +#184244 = VECTOR('',#184245,1.); +#184245 = DIRECTION('',(-0.452149402815,-0.891942216477,0.)); +#184246 = ORIENTED_EDGE('',*,*,#184247,.T.); +#184247 = EDGE_CURVE('',#184240,#184248,#184250,.T.); +#184248 = VERTEX_POINT('',#184249); +#184249 = CARTESIAN_POINT('',(207.042897,-91.468793,1.585)); +#184250 = LINE('',#184251,#184252); +#184251 = CARTESIAN_POINT('',(207.1066,-91.406097,1.585)); +#184252 = VECTOR('',#184253,1.); +#184253 = DIRECTION('',(-0.712717566469,-0.701451117646,0.)); +#184254 = ORIENTED_EDGE('',*,*,#184255,.T.); +#184255 = EDGE_CURVE('',#184248,#184256,#184258,.T.); +#184256 = VERTEX_POINT('',#184257); +#184257 = CARTESIAN_POINT('',(206.948198,-91.353398,1.585)); +#184258 = CIRCLE('',#184259,7.500012668042E-02); +#184259 = AXIS2_PLACEMENT_3D('',#184260,#184261,#184262); +#184260 = CARTESIAN_POINT('',(207.00123024831,-91.406431948,1.585)); +#184261 = DIRECTION('',(0.,0.,-1.)); +#184262 = DIRECTION('',(0.555555750804,-0.831479288827,0.)); +#184263 = ORIENTED_EDGE('',*,*,#184264,.T.); +#184264 = EDGE_CURVE('',#184256,#184265,#184267,.T.); +#184265 = VERTEX_POINT('',#184266); +#184266 = CARTESIAN_POINT('',(206.987211,-91.314385,1.585)); +#184267 = LINE('',#184268,#184269); +#184268 = CARTESIAN_POINT('',(206.948198,-91.353398,1.585)); +#184269 = VECTOR('',#184270,1.); +#184270 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#184271 = ORIENTED_EDGE('',*,*,#184272,.T.); +#184272 = EDGE_CURVE('',#184265,#184273,#184275,.T.); +#184273 = VERTEX_POINT('',#184274); +#184274 = CARTESIAN_POINT('',(206.987211,-90.92705,1.585)); +#184275 = CIRCLE('',#184276,0.358499305983); +#184276 = AXIS2_PLACEMENT_3D('',#184277,#184278,#184279); +#184277 = CARTESIAN_POINT('',(206.68552465322,-91.1207175,1.585)); +#184278 = DIRECTION('',(0.,-0.,1.)); +#184279 = DIRECTION('',(0.841525608965,-0.540217224324,-0.)); +#184280 = ORIENTED_EDGE('',*,*,#184281,.T.); +#184281 = EDGE_CURVE('',#184273,#184282,#184284,.T.); +#184282 = VERTEX_POINT('',#184283); +#184283 = CARTESIAN_POINT('',(206.956803,-90.896643,1.585)); +#184284 = LINE('',#184285,#184286); +#184285 = CARTESIAN_POINT('',(206.987211,-90.92705,1.585)); +#184286 = VECTOR('',#184287,1.); +#184287 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#184288 = ORIENTED_EDGE('',*,*,#184289,.T.); +#184289 = EDGE_CURVE('',#184282,#184290,#184292,.T.); +#184290 = VERTEX_POINT('',#184291); +#184291 = CARTESIAN_POINT('',(206.617086,-90.896643,1.585)); +#184292 = CIRCLE('',#184293,0.305621483548); +#184293 = AXIS2_PLACEMENT_3D('',#184294,#184295,#184296); +#184294 = CARTESIAN_POINT('',(206.7869445,-91.150715,1.585)); +#184295 = DIRECTION('',(0.,0.,1.)); +#184296 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#184297 = ORIENTED_EDGE('',*,*,#184298,.T.); +#184298 = EDGE_CURVE('',#184290,#184299,#184301,.T.); +#184299 = VERTEX_POINT('',#184300); +#184300 = CARTESIAN_POINT('',(206.586679,-90.92705,1.585)); +#184301 = LINE('',#184302,#184303); +#184302 = CARTESIAN_POINT('',(206.617086,-90.896643,1.585)); +#184303 = VECTOR('',#184304,1.); +#184304 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184305 = ORIENTED_EDGE('',*,*,#184306,.T.); +#184306 = EDGE_CURVE('',#184299,#184307,#184309,.T.); +#184307 = VERTEX_POINT('',#184308); +#184308 = CARTESIAN_POINT('',(206.552421,-90.995566,1.585)); +#184309 = LINE('',#184310,#184311); +#184310 = CARTESIAN_POINT('',(206.586679,-90.92705,1.585)); +#184311 = VECTOR('',#184312,1.); +#184312 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#184313 = ORIENTED_EDGE('',*,*,#184314,.T.); +#184314 = EDGE_CURVE('',#184307,#184315,#184317,.T.); +#184315 = VERTEX_POINT('',#184316); +#184316 = CARTESIAN_POINT('',(206.55098,-91.13535,1.585)); +#184317 = LINE('',#184318,#184319); +#184318 = CARTESIAN_POINT('',(206.552421,-90.995566,1.585)); +#184319 = VECTOR('',#184320,1.); +#184320 = DIRECTION('',(-1.030821437469E-02,-0.999946868947,0.)); +#184321 = ORIENTED_EDGE('',*,*,#184322,.T.); +#184322 = EDGE_CURVE('',#184315,#184323,#184325,.T.); +#184323 = VERTEX_POINT('',#184324); +#184324 = CARTESIAN_POINT('',(206.428033,-91.177161,1.585)); +#184325 = CIRCLE('',#184326,7.500015628755E-02); +#184326 = AXIS2_PLACEMENT_3D('',#184327,#184328,#184329); +#184327 = CARTESIAN_POINT('',(206.4774210461,-91.12071771567,1.585)); +#184328 = DIRECTION('',(-0.,0.,-1.)); +#184329 = DIRECTION('',(0.980784008184,-0.195096717785,-0.)); +#184330 = ORIENTED_EDGE('',*,*,#184331,.T.); +#184331 = EDGE_CURVE('',#184323,#184332,#184334,.T.); +#184332 = VERTEX_POINT('',#184333); +#184333 = CARTESIAN_POINT('',(206.171469,-90.952667,1.585)); +#184334 = LINE('',#184335,#184336); +#184335 = CARTESIAN_POINT('',(206.428033,-91.177161,1.585)); +#184336 = VECTOR('',#184337,1.); +#184337 = DIRECTION('',(-0.752575967874,0.658505438534,0.)); +#184338 = ORIENTED_EDGE('',*,*,#184339,.T.); +#184339 = EDGE_CURVE('',#184332,#184340,#184342,.T.); +#184340 = VERTEX_POINT('',#184341); +#184341 = CARTESIAN_POINT('',(206.170028,-91.421064,1.585)); +#184342 = LINE('',#184343,#184344); +#184343 = CARTESIAN_POINT('',(206.171469,-90.952667,1.585)); +#184344 = VECTOR('',#184345,1.); +#184345 = DIRECTION('',(-3.076435546862E-03,-0.999995267761,0.)); +#184346 = ORIENTED_EDGE('',*,*,#184347,.T.); +#184347 = EDGE_CURVE('',#184340,#184348,#184350,.T.); +#184348 = VERTEX_POINT('',#184349); +#184349 = CARTESIAN_POINT('',(206.021469,-91.406432,1.585)); +#184350 = CIRCLE('',#184351,7.500006711464E-02); +#184351 = AXIS2_PLACEMENT_3D('',#184352,#184353,#184354); +#184352 = CARTESIAN_POINT('',(206.09646906711,-91.40643206711,1.585)); +#184353 = DIRECTION('',(-0.,0.,-1.)); +#184354 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#184355 = ORIENTED_EDGE('',*,*,#184356,.T.); +#184356 = EDGE_CURVE('',#184348,#184357,#184359,.T.); +#184357 = VERTEX_POINT('',#184358); +#184358 = CARTESIAN_POINT('',(206.02291,-90.772753,1.585)); +#184359 = LINE('',#184360,#184361); +#184360 = CARTESIAN_POINT('',(206.021469,-91.406432,1.585)); +#184361 = VECTOR('',#184362,1.); +#184362 = DIRECTION('',(2.274016140951E-03,0.999997414422,0.)); +#184363 = ORIENTED_EDGE('',*,*,#184364,.T.); +#184364 = EDGE_CURVE('',#184357,#184365,#184367,.T.); +#184365 = VERTEX_POINT('',#184366); +#184366 = CARTESIAN_POINT('',(206.034109,-90.745717,1.585)); +#184367 = LINE('',#184368,#184369); +#184368 = CARTESIAN_POINT('',(206.02291,-90.772753,1.585)); +#184369 = VECTOR('',#184370,1.); +#184370 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#184371 = ORIENTED_EDGE('',*,*,#184372,.T.); +#184372 = EDGE_CURVE('',#184365,#184187,#184373,.T.); +#184373 = LINE('',#184374,#184375); +#184374 = CARTESIAN_POINT('',(206.034109,-90.745717,1.585)); +#184375 = VECTOR('',#184376,1.); +#184376 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184377 = PLANE('',#184378); +#184378 = AXIS2_PLACEMENT_3D('',#184379,#184380,#184381); +#184379 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184380 = DIRECTION('',(0.,0.,1.)); +#184381 = DIRECTION('',(1.,0.,-0.)); +#184382 = SHELL_BASED_SURFACE_MODEL('',(#184383)); +#184383 = OPEN_SHELL('',(#184384)); +#184384 = ADVANCED_FACE('',(#184385,#184519),#184597,.T.); +#184385 = FACE_BOUND('',#184386,.F.); +#184386 = EDGE_LOOP('',(#184387,#184397,#184405,#184413,#184421,#184430, + #184438,#184447,#184455,#184463,#184471,#184479,#184487,#184496, + #184504,#184513)); +#184387 = ORIENTED_EDGE('',*,*,#184388,.T.); +#184388 = EDGE_CURVE('',#184389,#184391,#184393,.T.); +#184389 = VERTEX_POINT('',#184390); +#184390 = CARTESIAN_POINT('',(139.968689,-89.267667,1.585)); +#184391 = VERTEX_POINT('',#184392); +#184392 = CARTESIAN_POINT('',(139.99165,-89.2631,1.585)); +#184393 = LINE('',#184394,#184395); +#184394 = CARTESIAN_POINT('',(139.968689,-89.267667,1.585)); +#184395 = VECTOR('',#184396,1.); +#184396 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#184397 = ORIENTED_EDGE('',*,*,#184398,.T.); +#184398 = EDGE_CURVE('',#184391,#184399,#184401,.T.); +#184399 = VERTEX_POINT('',#184400); +#184400 = CARTESIAN_POINT('',(142.79165,-89.2631,1.585)); +#184401 = LINE('',#184402,#184403); +#184402 = CARTESIAN_POINT('',(139.99165,-89.2631,1.585)); +#184403 = VECTOR('',#184404,1.); +#184404 = DIRECTION('',(1.,0.,0.)); +#184405 = ORIENTED_EDGE('',*,*,#184406,.T.); +#184406 = EDGE_CURVE('',#184399,#184407,#184409,.T.); +#184407 = VERTEX_POINT('',#184408); +#184408 = CARTESIAN_POINT('',(142.814611,-89.267667,1.585)); +#184409 = LINE('',#184410,#184411); +#184410 = CARTESIAN_POINT('',(142.79165,-89.2631,1.585)); +#184411 = VECTOR('',#184412,1.); +#184412 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#184413 = ORIENTED_EDGE('',*,*,#184414,.T.); +#184414 = EDGE_CURVE('',#184407,#184415,#184417,.T.); +#184415 = VERTEX_POINT('',#184416); +#184416 = CARTESIAN_POINT('',(142.889919,-89.277703,1.585)); +#184417 = LINE('',#184418,#184419); +#184418 = CARTESIAN_POINT('',(142.814611,-89.267667,1.585)); +#184419 = VECTOR('',#184420,1.); +#184420 = DIRECTION('',(0.991236635155,-0.132098195018,0.)); +#184421 = ORIENTED_EDGE('',*,*,#184422,.T.); +#184422 = EDGE_CURVE('',#184415,#184423,#184425,.T.); +#184423 = VERTEX_POINT('',#184424); +#184424 = CARTESIAN_POINT('',(143.50165,-90.0231,1.585)); +#184425 = CIRCLE('',#184426,0.760001389949); +#184426 = AXIS2_PLACEMENT_3D('',#184427,#184428,#184429); +#184427 = CARTESIAN_POINT('',(142.74164861005,-90.02310088314,1.585)); +#184428 = DIRECTION('',(0.,0.,-1.)); +#184429 = DIRECTION('',(0.195092261553,0.980784894603,0.)); +#184430 = ORIENTED_EDGE('',*,*,#184431,.T.); +#184431 = EDGE_CURVE('',#184423,#184432,#184434,.T.); +#184432 = VERTEX_POINT('',#184433); +#184433 = CARTESIAN_POINT('',(143.50165,-90.6231,1.585)); +#184434 = LINE('',#184435,#184436); +#184435 = CARTESIAN_POINT('',(143.50165,-90.0231,1.585)); +#184436 = VECTOR('',#184437,1.); +#184437 = DIRECTION('',(0.,-1.,0.)); +#184438 = ORIENTED_EDGE('',*,*,#184439,.T.); +#184439 = EDGE_CURVE('',#184432,#184440,#184442,.T.); +#184440 = VERTEX_POINT('',#184441); +#184441 = CARTESIAN_POINT('',(142.889919,-91.368497,1.585)); +#184442 = CIRCLE('',#184443,0.759999019977); +#184443 = AXIS2_PLACEMENT_3D('',#184444,#184445,#184446); +#184444 = CARTESIAN_POINT('',(142.74165098002,-90.62310106184,1.585)); +#184445 = DIRECTION('',(0.,0.,-1.)); +#184446 = DIRECTION('',(0.999999999999,1.397165543076E-06,0.)); +#184447 = ORIENTED_EDGE('',*,*,#184448,.T.); +#184448 = EDGE_CURVE('',#184440,#184449,#184451,.T.); +#184449 = VERTEX_POINT('',#184450); +#184450 = CARTESIAN_POINT('',(142.814611,-91.378533,1.585)); +#184451 = LINE('',#184452,#184453); +#184452 = CARTESIAN_POINT('',(142.889919,-91.368497,1.585)); +#184453 = VECTOR('',#184454,1.); +#184454 = DIRECTION('',(-0.991236635155,-0.132098195018,0.)); +#184455 = ORIENTED_EDGE('',*,*,#184456,.T.); +#184456 = EDGE_CURVE('',#184449,#184457,#184459,.T.); +#184457 = VERTEX_POINT('',#184458); +#184458 = CARTESIAN_POINT('',(142.79165,-91.3831,1.585)); +#184459 = LINE('',#184460,#184461); +#184460 = CARTESIAN_POINT('',(142.814611,-91.378533,1.585)); +#184461 = VECTOR('',#184462,1.); +#184462 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#184463 = ORIENTED_EDGE('',*,*,#184464,.T.); +#184464 = EDGE_CURVE('',#184457,#184465,#184467,.T.); +#184465 = VERTEX_POINT('',#184466); +#184466 = CARTESIAN_POINT('',(139.99165,-91.3831,1.585)); +#184467 = LINE('',#184468,#184469); +#184468 = CARTESIAN_POINT('',(142.79165,-91.3831,1.585)); +#184469 = VECTOR('',#184470,1.); +#184470 = DIRECTION('',(-1.,0.,0.)); +#184471 = ORIENTED_EDGE('',*,*,#184472,.T.); +#184472 = EDGE_CURVE('',#184465,#184473,#184475,.T.); +#184473 = VERTEX_POINT('',#184474); +#184474 = CARTESIAN_POINT('',(139.965783,-91.375627,1.585)); +#184475 = LINE('',#184476,#184477); +#184476 = CARTESIAN_POINT('',(139.99165,-91.3831,1.585)); +#184477 = VECTOR('',#184478,1.); +#184478 = DIRECTION('',(-0.960711101854,0.277550317554,0.)); +#184479 = ORIENTED_EDGE('',*,*,#184480,.T.); +#184480 = EDGE_CURVE('',#184473,#184481,#184483,.T.); +#184481 = VERTEX_POINT('',#184482); +#184482 = CARTESIAN_POINT('',(139.893381,-91.368497,1.585)); +#184483 = LINE('',#184484,#184485); +#184484 = CARTESIAN_POINT('',(139.965783,-91.375627,1.585)); +#184485 = VECTOR('',#184486,1.); +#184486 = DIRECTION('',(-0.995186033295,9.800387306128E-02,0.)); +#184487 = ORIENTED_EDGE('',*,*,#184488,.T.); +#184488 = EDGE_CURVE('',#184481,#184489,#184491,.T.); +#184489 = VERTEX_POINT('',#184490); +#184490 = CARTESIAN_POINT('',(139.28165,-90.6231,1.585)); +#184491 = CIRCLE('',#184492,0.760001389949); +#184492 = AXIS2_PLACEMENT_3D('',#184493,#184494,#184495); +#184493 = CARTESIAN_POINT('',(140.04165138994,-90.62309911686,1.585)); +#184494 = DIRECTION('',(0.,0.,-1.)); +#184495 = DIRECTION('',(-0.195092261553,-0.980784894603,-0.)); +#184496 = ORIENTED_EDGE('',*,*,#184497,.T.); +#184497 = EDGE_CURVE('',#184489,#184498,#184500,.T.); +#184498 = VERTEX_POINT('',#184499); +#184499 = CARTESIAN_POINT('',(139.28165,-90.0231,1.585)); +#184500 = LINE('',#184501,#184502); +#184501 = CARTESIAN_POINT('',(139.28165,-90.6231,1.585)); +#184502 = VECTOR('',#184503,1.); +#184503 = DIRECTION('',(0.,1.,0.)); +#184504 = ORIENTED_EDGE('',*,*,#184505,.T.); +#184505 = EDGE_CURVE('',#184498,#184506,#184508,.T.); +#184506 = VERTEX_POINT('',#184507); +#184507 = CARTESIAN_POINT('',(139.893381,-89.277703,1.585)); +#184508 = CIRCLE('',#184509,0.759999019977); +#184509 = AXIS2_PLACEMENT_3D('',#184510,#184511,#184512); +#184510 = CARTESIAN_POINT('',(140.04164901997,-90.02309893815,1.585)); +#184511 = DIRECTION('',(0.,0.,-1.)); +#184512 = DIRECTION('',(-0.999999999999,-1.397165636569E-06,-0.)); +#184513 = ORIENTED_EDGE('',*,*,#184514,.T.); +#184514 = EDGE_CURVE('',#184506,#184389,#184515,.T.); +#184515 = LINE('',#184516,#184517); +#184516 = CARTESIAN_POINT('',(139.893381,-89.277703,1.585)); +#184517 = VECTOR('',#184518,1.); +#184518 = DIRECTION('',(0.991236635155,0.132098195018,0.)); +#184519 = FACE_BOUND('',#184520,.F.); +#184520 = EDGE_LOOP('',(#184521,#184532,#184540,#184548,#184557,#184565, + #184574,#184582,#184591)); +#184521 = ORIENTED_EDGE('',*,*,#184522,.T.); +#184522 = EDGE_CURVE('',#184523,#184525,#184527,.T.); +#184523 = VERTEX_POINT('',#184524); +#184524 = CARTESIAN_POINT('',(143.38165,-89.950989,1.585)); +#184525 = VERTEX_POINT('',#184526); +#184526 = CARTESIAN_POINT('',(142.813761,-89.3831,1.585)); +#184527 = CIRCLE('',#184528,0.64404917508); +#184528 = AXIS2_PLACEMENT_3D('',#184529,#184530,#184531); +#184529 = CARTESIAN_POINT('',(142.74165046088,-90.02309953911,1.585)); +#184530 = DIRECTION('',(0.,0.,1.)); +#184531 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#184532 = ORIENTED_EDGE('',*,*,#184533,.T.); +#184533 = EDGE_CURVE('',#184525,#184534,#184536,.T.); +#184534 = VERTEX_POINT('',#184535); +#184535 = CARTESIAN_POINT('',(140.04165,-89.3831,1.585)); +#184536 = LINE('',#184537,#184538); +#184537 = CARTESIAN_POINT('',(142.813761,-89.3831,1.585)); +#184538 = VECTOR('',#184539,1.); +#184539 = DIRECTION('',(-1.,0.,0.)); +#184540 = ORIENTED_EDGE('',*,*,#184541,.T.); +#184541 = EDGE_CURVE('',#184534,#184542,#184544,.T.); +#184542 = VERTEX_POINT('',#184543); +#184543 = CARTESIAN_POINT('',(139.969539,-89.3831,1.585)); +#184544 = LINE('',#184545,#184546); +#184545 = CARTESIAN_POINT('',(140.04165,-89.3831,1.585)); +#184546 = VECTOR('',#184547,1.); +#184547 = DIRECTION('',(-1.,0.,0.)); +#184548 = ORIENTED_EDGE('',*,*,#184549,.T.); +#184549 = EDGE_CURVE('',#184542,#184550,#184552,.T.); +#184550 = VERTEX_POINT('',#184551); +#184551 = CARTESIAN_POINT('',(139.40165,-89.950989,1.585)); +#184552 = CIRCLE('',#184553,0.64404917508); +#184553 = AXIS2_PLACEMENT_3D('',#184554,#184555,#184556); +#184554 = CARTESIAN_POINT('',(140.04164953911,-90.02309953911,1.585)); +#184555 = DIRECTION('',(0.,0.,1.)); +#184556 = DIRECTION('',(-0.111964337363,0.993712225526,0.)); +#184557 = ORIENTED_EDGE('',*,*,#184558,.T.); +#184558 = EDGE_CURVE('',#184550,#184559,#184561,.T.); +#184559 = VERTEX_POINT('',#184560); +#184560 = CARTESIAN_POINT('',(139.40165,-90.695211,1.585)); +#184561 = LINE('',#184562,#184563); +#184562 = CARTESIAN_POINT('',(139.40165,-89.950989,1.585)); +#184563 = VECTOR('',#184564,1.); +#184564 = DIRECTION('',(0.,-1.,0.)); +#184565 = ORIENTED_EDGE('',*,*,#184566,.T.); +#184566 = EDGE_CURVE('',#184559,#184567,#184569,.T.); +#184567 = VERTEX_POINT('',#184568); +#184568 = CARTESIAN_POINT('',(139.969539,-91.2631,1.585)); +#184569 = CIRCLE('',#184570,0.64404917508); +#184570 = AXIS2_PLACEMENT_3D('',#184571,#184572,#184573); +#184571 = CARTESIAN_POINT('',(140.04164953911,-90.62310046088,1.585)); +#184572 = DIRECTION('',(0.,0.,1.)); +#184573 = DIRECTION('',(-0.993712225526,-0.111964337363,0.)); +#184574 = ORIENTED_EDGE('',*,*,#184575,.T.); +#184575 = EDGE_CURVE('',#184567,#184576,#184578,.T.); +#184576 = VERTEX_POINT('',#184577); +#184577 = CARTESIAN_POINT('',(142.813761,-91.2631,1.585)); +#184578 = LINE('',#184579,#184580); +#184579 = CARTESIAN_POINT('',(139.969539,-91.2631,1.585)); +#184580 = VECTOR('',#184581,1.); +#184581 = DIRECTION('',(1.,0.,0.)); +#184582 = ORIENTED_EDGE('',*,*,#184583,.T.); +#184583 = EDGE_CURVE('',#184576,#184584,#184586,.T.); +#184584 = VERTEX_POINT('',#184585); +#184585 = CARTESIAN_POINT('',(143.38165,-90.695211,1.585)); +#184586 = CIRCLE('',#184587,0.64404917508); +#184587 = AXIS2_PLACEMENT_3D('',#184588,#184589,#184590); +#184588 = CARTESIAN_POINT('',(142.74165046088,-90.62310046088,1.585)); +#184589 = DIRECTION('',(0.,0.,1.)); +#184590 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#184591 = ORIENTED_EDGE('',*,*,#184592,.T.); +#184592 = EDGE_CURVE('',#184584,#184523,#184593,.T.); +#184593 = LINE('',#184594,#184595); +#184594 = CARTESIAN_POINT('',(143.38165,-90.695211,1.585)); +#184595 = VECTOR('',#184596,1.); +#184596 = DIRECTION('',(0.,1.,0.)); +#184597 = PLANE('',#184598); +#184598 = AXIS2_PLACEMENT_3D('',#184599,#184600,#184601); +#184599 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184600 = DIRECTION('',(0.,0.,1.)); +#184601 = DIRECTION('',(1.,0.,-0.)); +#184602 = SHELL_BASED_SURFACE_MODEL('',(#184603)); +#184603 = OPEN_SHELL('',(#184604)); +#184604 = ADVANCED_FACE('',(#184605,#184799),#184869,.T.); +#184605 = FACE_BOUND('',#184606,.F.); +#184606 = EDGE_LOOP('',(#184607,#184617,#184625,#184633,#184641,#184649, + #184657,#184665,#184673,#184681,#184689,#184697,#184705,#184713, + #184721,#184729,#184737,#184745,#184753,#184761,#184769,#184777, + #184785,#184793)); +#184607 = ORIENTED_EDGE('',*,*,#184608,.T.); +#184608 = EDGE_CURVE('',#184609,#184611,#184613,.T.); +#184609 = VERTEX_POINT('',#184610); +#184610 = CARTESIAN_POINT('',(82.877073,-89.553851,1.585)); +#184611 = VERTEX_POINT('',#184612); +#184612 = CARTESIAN_POINT('',(83.168409,-89.410089,1.585)); +#184613 = LINE('',#184614,#184615); +#184614 = CARTESIAN_POINT('',(82.877073,-89.553851,1.585)); +#184615 = VECTOR('',#184616,1.); +#184616 = DIRECTION('',(0.896761620593,0.442513949871,0.)); +#184617 = ORIENTED_EDGE('',*,*,#184618,.T.); +#184618 = EDGE_CURVE('',#184611,#184619,#184621,.T.); +#184619 = VERTEX_POINT('',#184620); +#184620 = CARTESIAN_POINT('',(83.208028,-89.404763,1.585)); +#184621 = LINE('',#184622,#184623); +#184622 = CARTESIAN_POINT('',(83.168409,-89.410089,1.585)); +#184623 = VECTOR('',#184624,1.); +#184624 = DIRECTION('',(0.991084879219,0.133231986338,0.)); +#184625 = ORIENTED_EDGE('',*,*,#184626,.T.); +#184626 = EDGE_CURVE('',#184619,#184627,#184629,.T.); +#184627 = VERTEX_POINT('',#184628); +#184628 = CARTESIAN_POINT('',(83.980149,-89.407645,1.585)); +#184629 = LINE('',#184630,#184631); +#184630 = CARTESIAN_POINT('',(83.208028,-89.404763,1.585)); +#184631 = VECTOR('',#184632,1.); +#184632 = DIRECTION('',(0.999993034013,-3.732549592646E-03,0.)); +#184633 = ORIENTED_EDGE('',*,*,#184634,.T.); +#184634 = EDGE_CURVE('',#184627,#184635,#184637,.T.); +#184635 = VERTEX_POINT('',#184636); +#184636 = CARTESIAN_POINT('',(84.017967,-89.420599,1.585)); +#184637 = LINE('',#184638,#184639); +#184638 = CARTESIAN_POINT('',(83.980149,-89.407645,1.585)); +#184639 = VECTOR('',#184640,1.); +#184640 = DIRECTION('',(0.946039317712,-0.324051862119,0.)); +#184641 = ORIENTED_EDGE('',*,*,#184642,.T.); +#184642 = EDGE_CURVE('',#184635,#184643,#184645,.T.); +#184643 = VERTEX_POINT('',#184644); +#184644 = CARTESIAN_POINT('',(84.290471,-89.560073,1.585)); +#184645 = LINE('',#184646,#184647); +#184646 = CARTESIAN_POINT('',(84.017967,-89.420599,1.585)); +#184647 = VECTOR('',#184648,1.); +#184648 = DIRECTION('',(0.890177487146,-0.455613917015,0.)); +#184649 = ORIENTED_EDGE('',*,*,#184650,.T.); +#184650 = EDGE_CURVE('',#184643,#184651,#184653,.T.); +#184651 = VERTEX_POINT('',#184652); +#184652 = CARTESIAN_POINT('',(84.447035,-89.719047,1.585)); +#184653 = LINE('',#184654,#184655); +#184654 = CARTESIAN_POINT('',(84.290471,-89.560073,1.585)); +#184655 = VECTOR('',#184656,1.); +#184656 = DIRECTION('',(0.701685610985,-0.712486703972,0.)); +#184657 = ORIENTED_EDGE('',*,*,#184658,.T.); +#184658 = EDGE_CURVE('',#184651,#184659,#184661,.T.); +#184659 = VERTEX_POINT('',#184660); +#184660 = CARTESIAN_POINT('',(84.590797,-90.010382,1.585)); +#184661 = LINE('',#184662,#184663); +#184662 = CARTESIAN_POINT('',(84.447035,-89.719047,1.585)); +#184663 = VECTOR('',#184664,1.); +#184664 = DIRECTION('',(0.442515171356,-0.896761017841,0.)); +#184665 = ORIENTED_EDGE('',*,*,#184666,.T.); +#184666 = EDGE_CURVE('',#184659,#184667,#184669,.T.); +#184667 = VERTEX_POINT('',#184668); +#184668 = CARTESIAN_POINT('',(84.596123,-90.050001,1.585)); +#184669 = LINE('',#184670,#184671); +#184670 = CARTESIAN_POINT('',(84.590797,-90.010382,1.585)); +#184671 = VECTOR('',#184672,1.); +#184672 = DIRECTION('',(0.133231986338,-0.991084879219,0.)); +#184673 = ORIENTED_EDGE('',*,*,#184674,.T.); +#184674 = EDGE_CURVE('',#184667,#184675,#184677,.T.); +#184675 = VERTEX_POINT('',#184676); +#184676 = CARTESIAN_POINT('',(84.593241,-90.450693,1.585)); +#184677 = LINE('',#184678,#184679); +#184678 = CARTESIAN_POINT('',(84.596123,-90.050001,1.585)); +#184679 = VECTOR('',#184680,1.); +#184680 = DIRECTION('',(-7.192370838E-03,-0.999974134566,0.)); +#184681 = ORIENTED_EDGE('',*,*,#184682,.T.); +#184682 = EDGE_CURVE('',#184675,#184683,#184685,.T.); +#184683 = VERTEX_POINT('',#184684); +#184684 = CARTESIAN_POINT('',(84.580287,-90.488511,1.585)); +#184685 = LINE('',#184686,#184687); +#184686 = CARTESIAN_POINT('',(84.593241,-90.450693,1.585)); +#184687 = VECTOR('',#184688,1.); +#184688 = DIRECTION('',(-0.32405186212,-0.946039317712,0.)); +#184689 = ORIENTED_EDGE('',*,*,#184690,.T.); +#184690 = EDGE_CURVE('',#184683,#184691,#184693,.T.); +#184691 = VERTEX_POINT('',#184692); +#184692 = CARTESIAN_POINT('',(84.440813,-90.761015,1.585)); +#184693 = LINE('',#184694,#184695); +#184694 = CARTESIAN_POINT('',(84.580287,-90.488511,1.585)); +#184695 = VECTOR('',#184696,1.); +#184696 = DIRECTION('',(-0.455613917015,-0.890177487146,0.)); +#184697 = ORIENTED_EDGE('',*,*,#184698,.T.); +#184698 = EDGE_CURVE('',#184691,#184699,#184701,.T.); +#184699 = VERTEX_POINT('',#184700); +#184700 = CARTESIAN_POINT('',(84.281839,-90.917579,1.585)); +#184701 = LINE('',#184702,#184703); +#184702 = CARTESIAN_POINT('',(84.440813,-90.761015,1.585)); +#184703 = VECTOR('',#184704,1.); +#184704 = DIRECTION('',(-0.712486703972,-0.701685610985,0.)); +#184705 = ORIENTED_EDGE('',*,*,#184706,.T.); +#184706 = EDGE_CURVE('',#184699,#184707,#184709,.T.); +#184707 = VERTEX_POINT('',#184708); +#184708 = CARTESIAN_POINT('',(83.990503,-91.061341,1.585)); +#184709 = LINE('',#184710,#184711); +#184710 = CARTESIAN_POINT('',(84.281839,-90.917579,1.585)); +#184711 = VECTOR('',#184712,1.); +#184712 = DIRECTION('',(-0.896761620593,-0.442513949871,0.)); +#184713 = ORIENTED_EDGE('',*,*,#184714,.T.); +#184714 = EDGE_CURVE('',#184707,#184715,#184717,.T.); +#184715 = VERTEX_POINT('',#184716); +#184716 = CARTESIAN_POINT('',(83.950885,-91.066667,1.585)); +#184717 = LINE('',#184718,#184719); +#184718 = CARTESIAN_POINT('',(83.990503,-91.061341,1.585)); +#184719 = VECTOR('',#184720,1.); +#184720 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#184721 = ORIENTED_EDGE('',*,*,#184722,.T.); +#184722 = EDGE_CURVE('',#184715,#184723,#184725,.T.); +#184723 = VERTEX_POINT('',#184724); +#184724 = CARTESIAN_POINT('',(83.178764,-91.063785,1.585)); +#184725 = LINE('',#184726,#184727); +#184726 = CARTESIAN_POINT('',(83.950885,-91.066667,1.585)); +#184727 = VECTOR('',#184728,1.); +#184728 = DIRECTION('',(-0.999993034013,3.732549592646E-03,0.)); +#184729 = ORIENTED_EDGE('',*,*,#184730,.T.); +#184730 = EDGE_CURVE('',#184723,#184731,#184733,.T.); +#184731 = VERTEX_POINT('',#184732); +#184732 = CARTESIAN_POINT('',(83.140946,-91.050831,1.585)); +#184733 = LINE('',#184734,#184735); +#184734 = CARTESIAN_POINT('',(83.178764,-91.063785,1.585)); +#184735 = VECTOR('',#184736,1.); +#184736 = DIRECTION('',(-0.946039317712,0.324051862119,0.)); +#184737 = ORIENTED_EDGE('',*,*,#184738,.T.); +#184738 = EDGE_CURVE('',#184731,#184739,#184741,.T.); +#184739 = VERTEX_POINT('',#184740); +#184740 = CARTESIAN_POINT('',(82.868442,-90.911357,1.585)); +#184741 = LINE('',#184742,#184743); +#184742 = CARTESIAN_POINT('',(83.140946,-91.050831,1.585)); +#184743 = VECTOR('',#184744,1.); +#184744 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#184745 = ORIENTED_EDGE('',*,*,#184746,.T.); +#184746 = EDGE_CURVE('',#184739,#184747,#184749,.T.); +#184747 = VERTEX_POINT('',#184748); +#184748 = CARTESIAN_POINT('',(82.711879,-90.752383,1.585)); +#184749 = LINE('',#184750,#184751); +#184750 = CARTESIAN_POINT('',(82.868442,-90.911357,1.585)); +#184751 = VECTOR('',#184752,1.); +#184752 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#184753 = ORIENTED_EDGE('',*,*,#184754,.T.); +#184754 = EDGE_CURVE('',#184747,#184755,#184757,.T.); +#184755 = VERTEX_POINT('',#184756); +#184756 = CARTESIAN_POINT('',(82.568116,-90.461048,1.585)); +#184757 = LINE('',#184758,#184759); +#184758 = CARTESIAN_POINT('',(82.711879,-90.752383,1.585)); +#184759 = VECTOR('',#184760,1.); +#184760 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#184761 = ORIENTED_EDGE('',*,*,#184762,.T.); +#184762 = EDGE_CURVE('',#184755,#184763,#184765,.T.); +#184763 = VERTEX_POINT('',#184764); +#184764 = CARTESIAN_POINT('',(82.56279,-90.421429,1.585)); +#184765 = LINE('',#184766,#184767); +#184766 = CARTESIAN_POINT('',(82.568116,-90.461048,1.585)); +#184767 = VECTOR('',#184768,1.); +#184768 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#184769 = ORIENTED_EDGE('',*,*,#184770,.T.); +#184770 = EDGE_CURVE('',#184763,#184771,#184773,.T.); +#184771 = VERTEX_POINT('',#184772); +#184772 = CARTESIAN_POINT('',(82.565672,-90.020737,1.585)); +#184773 = LINE('',#184774,#184775); +#184774 = CARTESIAN_POINT('',(82.56279,-90.421429,1.585)); +#184775 = VECTOR('',#184776,1.); +#184776 = DIRECTION('',(7.192370838E-03,0.999974134566,0.)); +#184777 = ORIENTED_EDGE('',*,*,#184778,.T.); +#184778 = EDGE_CURVE('',#184771,#184779,#184781,.T.); +#184779 = VERTEX_POINT('',#184780); +#184780 = CARTESIAN_POINT('',(82.578626,-89.982919,1.585)); +#184781 = LINE('',#184782,#184783); +#184782 = CARTESIAN_POINT('',(82.565672,-90.020737,1.585)); +#184783 = VECTOR('',#184784,1.); +#184784 = DIRECTION('',(0.324051862119,0.946039317712,0.)); +#184785 = ORIENTED_EDGE('',*,*,#184786,.T.); +#184786 = EDGE_CURVE('',#184779,#184787,#184789,.T.); +#184787 = VERTEX_POINT('',#184788); +#184788 = CARTESIAN_POINT('',(82.718101,-89.710414,1.585)); +#184789 = LINE('',#184790,#184791); +#184790 = CARTESIAN_POINT('',(82.578626,-89.982919,1.585)); +#184791 = VECTOR('',#184792,1.); +#184792 = DIRECTION('',(0.455615180679,0.890176840372,0.)); +#184793 = ORIENTED_EDGE('',*,*,#184794,.T.); +#184794 = EDGE_CURVE('',#184787,#184609,#184795,.T.); +#184795 = LINE('',#184796,#184797); +#184796 = CARTESIAN_POINT('',(82.718101,-89.710414,1.585)); +#184797 = VECTOR('',#184798,1.); +#184798 = DIRECTION('',(0.712484531253,0.701687817141,0.)); +#184799 = FACE_BOUND('',#184800,.F.); +#184800 = EDGE_LOOP('',(#184801,#184812,#184820,#184829,#184837,#184846, + #184854,#184863)); +#184801 = ORIENTED_EDGE('',*,*,#184802,.T.); +#184802 = EDGE_CURVE('',#184803,#184805,#184807,.T.); +#184803 = VERTEX_POINT('',#184804); +#184804 = CARTESIAN_POINT('',(84.10965,-89.80185,1.585)); +#184805 = VERTEX_POINT('',#184806); +#184806 = CARTESIAN_POINT('',(83.049263,-89.801849,1.585)); +#184807 = CIRCLE('',#184808,0.974528751426); +#184808 = AXIS2_PLACEMENT_3D('',#184809,#184810,#184811); +#184809 = CARTESIAN_POINT('',(83.579455728885,-90.61952984091,1.585)); +#184810 = DIRECTION('',(0.,0.,1.)); +#184811 = DIRECTION('',(0.544051953664,0.839051531025,-0.)); +#184812 = ORIENTED_EDGE('',*,*,#184813,.T.); +#184813 = EDGE_CURVE('',#184805,#184814,#184816,.T.); +#184814 = VERTEX_POINT('',#184815); +#184815 = CARTESIAN_POINT('',(82.959878,-89.891235,1.585)); +#184816 = LINE('',#184817,#184818); +#184817 = CARTESIAN_POINT('',(83.049263,-89.801849,1.585)); +#184818 = VECTOR('',#184819,1.); +#184819 = DIRECTION('',(-0.707102825798,-0.707110736553,0.)); +#184820 = ORIENTED_EDGE('',*,*,#184821,.T.); +#184821 = EDGE_CURVE('',#184814,#184822,#184824,.T.); +#184822 = VERTEX_POINT('',#184823); +#184823 = CARTESIAN_POINT('',(82.959878,-90.580194,1.585)); +#184824 = CIRCLE('',#184825,0.563733421966); +#184825 = AXIS2_PLACEMENT_3D('',#184826,#184827,#184828); +#184826 = CARTESIAN_POINT('',(83.406117,-90.2357145,1.585)); +#184827 = DIRECTION('',(0.,0.,1.)); +#184828 = DIRECTION('',(-0.791578044892,0.611068080368,0.)); +#184829 = ORIENTED_EDGE('',*,*,#184830,.T.); +#184830 = EDGE_CURVE('',#184822,#184831,#184833,.T.); +#184831 = VERTEX_POINT('',#184832); +#184832 = CARTESIAN_POINT('',(83.049263,-90.66958,1.585)); +#184833 = LINE('',#184834,#184835); +#184834 = CARTESIAN_POINT('',(82.959878,-90.580194,1.585)); +#184835 = VECTOR('',#184836,1.); +#184836 = DIRECTION('',(0.707102825798,-0.707110736553,0.)); +#184837 = ORIENTED_EDGE('',*,*,#184838,.T.); +#184838 = EDGE_CURVE('',#184831,#184839,#184841,.T.); +#184839 = VERTEX_POINT('',#184840); +#184840 = CARTESIAN_POINT('',(84.10965,-90.669579,1.585)); +#184841 = CIRCLE('',#184842,0.974520845789); +#184842 = AXIS2_PLACEMENT_3D('',#184843,#184844,#184845); +#184843 = CARTESIAN_POINT('',(83.579455728894,-89.85190858121,1.585)); +#184844 = DIRECTION('',(0.,0.,1.)); +#184845 = DIRECTION('',(-0.544054784652,-0.839049695368,0.)); +#184846 = ORIENTED_EDGE('',*,*,#184847,.T.); +#184847 = EDGE_CURVE('',#184839,#184848,#184850,.T.); +#184848 = VERTEX_POINT('',#184849); +#184849 = CARTESIAN_POINT('',(84.199035,-90.580194,1.585)); +#184850 = LINE('',#184851,#184852); +#184851 = CARTESIAN_POINT('',(84.10965,-90.669579,1.585)); +#184852 = VECTOR('',#184853,1.); +#184853 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184854 = ORIENTED_EDGE('',*,*,#184855,.T.); +#184855 = EDGE_CURVE('',#184848,#184856,#184858,.T.); +#184856 = VERTEX_POINT('',#184857); +#184857 = CARTESIAN_POINT('',(84.199035,-89.891235,1.585)); +#184858 = CIRCLE('',#184859,0.563732196508); +#184859 = AXIS2_PLACEMENT_3D('',#184860,#184861,#184862); +#184860 = CARTESIAN_POINT('',(83.752797548121,-90.2357145,1.585)); +#184861 = DIRECTION('',(0.,-0.,1.)); +#184862 = DIRECTION('',(0.791577019448,-0.611069408726,-0.)); +#184863 = ORIENTED_EDGE('',*,*,#184864,.T.); +#184864 = EDGE_CURVE('',#184856,#184803,#184865,.T.); +#184865 = LINE('',#184866,#184867); +#184866 = CARTESIAN_POINT('',(84.199035,-89.891235,1.585)); +#184867 = VECTOR('',#184868,1.); +#184868 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184869 = PLANE('',#184870); +#184870 = AXIS2_PLACEMENT_3D('',#184871,#184872,#184873); +#184871 = CARTESIAN_POINT('',(0.,0.,1.585)); +#184872 = DIRECTION('',(0.,0.,1.)); +#184873 = DIRECTION('',(1.,0.,-0.)); +#184874 = SHELL_BASED_SURFACE_MODEL('',(#184875)); +#184875 = OPEN_SHELL('',(#184876)); +#184876 = ADVANCED_FACE('',(#184877),#184997,.T.); +#184877 = FACE_BOUND('',#184878,.F.); +#184878 = EDGE_LOOP('',(#184879,#184890,#184898,#184907,#184915,#184924, + #184932,#184941,#184949,#184958,#184966,#184975,#184983,#184991)); +#184879 = ORIENTED_EDGE('',*,*,#184880,.T.); +#184880 = EDGE_CURVE('',#184881,#184883,#184885,.T.); +#184881 = VERTEX_POINT('',#184882); +#184882 = CARTESIAN_POINT('',(120.938077,-89.885559,1.585)); +#184883 = VERTEX_POINT('',#184884); +#184884 = CARTESIAN_POINT('',(121.054745,-89.947919,1.585)); +#184885 = CIRCLE('',#184886,7.500000000002E-02); +#184886 = AXIS2_PLACEMENT_3D('',#184887,#184888,#184889); +#184887 = CARTESIAN_POINT('',(120.979745,-89.94791906555,1.585)); +#184888 = DIRECTION('',(0.,0.,-1.)); +#184889 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#184890 = ORIENTED_EDGE('',*,*,#184891,.T.); +#184891 = EDGE_CURVE('',#184883,#184892,#184894,.T.); +#184892 = VERTEX_POINT('',#184893); +#184893 = CARTESIAN_POINT('',(121.054745,-90.739737,1.585)); +#184894 = LINE('',#184895,#184896); +#184895 = CARTESIAN_POINT('',(121.054745,-89.947919,1.585)); +#184896 = VECTOR('',#184897,1.); +#184897 = DIRECTION('',(0.,-1.,0.)); +#184898 = ORIENTED_EDGE('',*,*,#184899,.T.); +#184899 = EDGE_CURVE('',#184892,#184900,#184902,.T.); +#184900 = VERTEX_POINT('',#184901); +#184901 = CARTESIAN_POINT('',(121.187926,-90.872919,1.585)); +#184902 = CIRCLE('',#184903,0.186867373533); +#184903 = AXIS2_PLACEMENT_3D('',#184904,#184905,#184906); +#184904 = CARTESIAN_POINT('',(121.23546471388,-90.69219964305,1.585)); +#184905 = DIRECTION('',(0.,0.,1.)); +#184906 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#184907 = ORIENTED_EDGE('',*,*,#184908,.T.); +#184908 = EDGE_CURVE('',#184900,#184909,#184911,.T.); +#184909 = VERTEX_POINT('',#184910); +#184910 = CARTESIAN_POINT('',(121.342992,-90.872919,1.585)); +#184911 = LINE('',#184912,#184913); +#184912 = CARTESIAN_POINT('',(121.187926,-90.872919,1.585)); +#184913 = VECTOR('',#184914,1.); +#184914 = DIRECTION('',(1.,0.,0.)); +#184915 = ORIENTED_EDGE('',*,*,#184916,.T.); +#184916 = EDGE_CURVE('',#184909,#184917,#184919,.T.); +#184917 = VERTEX_POINT('',#184918); +#184918 = CARTESIAN_POINT('',(121.476173,-90.739737,1.585)); +#184919 = CIRCLE('',#184920,0.186867760544); +#184920 = AXIS2_PLACEMENT_3D('',#184921,#184922,#184923); +#184921 = CARTESIAN_POINT('',(121.29545296928,-90.69219932622,1.585)); +#184922 = DIRECTION('',(0.,0.,1.)); +#184923 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#184924 = ORIENTED_EDGE('',*,*,#184925,.T.); +#184925 = EDGE_CURVE('',#184917,#184926,#184928,.T.); +#184926 = VERTEX_POINT('',#184927); +#184927 = CARTESIAN_POINT('',(121.477614,-89.933287,1.585)); +#184928 = LINE('',#184929,#184930); +#184929 = CARTESIAN_POINT('',(121.476173,-90.739737,1.585)); +#184930 = VECTOR('',#184931,1.); +#184931 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#184932 = ORIENTED_EDGE('',*,*,#184933,.T.); +#184933 = EDGE_CURVE('',#184926,#184934,#184936,.T.); +#184934 = VERTEX_POINT('',#184935); +#184935 = CARTESIAN_POINT('',(121.626173,-89.947919,1.585)); +#184936 = CIRCLE('',#184937,7.500006711463E-02); +#184937 = AXIS2_PLACEMENT_3D('',#184938,#184939,#184940); +#184938 = CARTESIAN_POINT('',(121.55117293288,-89.94791893288,1.585)); +#184939 = DIRECTION('',(0.,0.,-1.)); +#184940 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#184941 = ORIENTED_EDGE('',*,*,#184942,.T.); +#184942 = EDGE_CURVE('',#184934,#184943,#184945,.T.); +#184943 = VERTEX_POINT('',#184944); +#184944 = CARTESIAN_POINT('',(121.62351,-90.777252,1.585)); +#184945 = LINE('',#184946,#184947); +#184946 = CARTESIAN_POINT('',(121.626173,-89.947919,1.585)); +#184947 = VECTOR('',#184948,1.); +#184948 = DIRECTION('',(-3.210997598702E-03,-0.999994844734,0.)); +#184949 = ORIENTED_EDGE('',*,*,#184950,.T.); +#184950 = EDGE_CURVE('',#184943,#184951,#184953,.T.); +#184951 = VERTEX_POINT('',#184952); +#184952 = CARTESIAN_POINT('',(121.375329,-91.021478,1.585)); +#184953 = CIRCLE('',#184954,0.348635327447); +#184954 = AXIS2_PLACEMENT_3D('',#184955,#184956,#184957); +#184955 = CARTESIAN_POINT('',(121.28755748129,-90.68407208415,1.585)); +#184956 = DIRECTION('',(0.,0.,-1.)); +#184957 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#184958 = ORIENTED_EDGE('',*,*,#184959,.T.); +#184959 = EDGE_CURVE('',#184951,#184960,#184962,.T.); +#184960 = VERTEX_POINT('',#184961); +#184961 = CARTESIAN_POINT('',(121.150411,-91.020256,1.585)); +#184962 = LINE('',#184963,#184964); +#184963 = CARTESIAN_POINT('',(121.375329,-91.021478,1.585)); +#184964 = VECTOR('',#184965,1.); +#184965 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#184966 = ORIENTED_EDGE('',*,*,#184967,.T.); +#184967 = EDGE_CURVE('',#184960,#184968,#184970,.T.); +#184968 = VERTEX_POINT('',#184969); +#184969 = CARTESIAN_POINT('',(120.906186,-90.772074,1.585)); +#184970 = CIRCLE('',#184971,0.348628446662); +#184971 = AXIS2_PLACEMENT_3D('',#184972,#184973,#184974); +#184972 = CARTESIAN_POINT('',(121.24358661322,-90.68430942847,1.585)); +#184973 = DIRECTION('',(0.,0.,-1.)); +#184974 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#184975 = ORIENTED_EDGE('',*,*,#184976,.T.); +#184976 = EDGE_CURVE('',#184968,#184977,#184979,.T.); +#184977 = VERTEX_POINT('',#184978); +#184978 = CARTESIAN_POINT('',(120.906186,-89.933287,1.585)); +#184979 = LINE('',#184980,#184981); +#184980 = CARTESIAN_POINT('',(120.906186,-90.772074,1.585)); +#184981 = VECTOR('',#184982,1.); +#184982 = DIRECTION('',(0.,1.,0.)); +#184983 = ORIENTED_EDGE('',*,*,#184984,.T.); +#184984 = EDGE_CURVE('',#184977,#184985,#184987,.T.); +#184985 = VERTEX_POINT('',#184986); +#184986 = CARTESIAN_POINT('',(120.917385,-89.906251,1.585)); +#184987 = LINE('',#184988,#184989); +#184988 = CARTESIAN_POINT('',(120.906186,-89.933287,1.585)); +#184989 = VECTOR('',#184990,1.); +#184990 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#184991 = ORIENTED_EDGE('',*,*,#184992,.T.); +#184992 = EDGE_CURVE('',#184985,#184881,#184993,.T.); +#184993 = LINE('',#184994,#184995); +#184994 = CARTESIAN_POINT('',(120.917385,-89.906251,1.585)); +#184995 = VECTOR('',#184996,1.); +#184996 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#184997 = PLANE('',#184998); +#184998 = AXIS2_PLACEMENT_3D('',#184999,#185000,#185001); +#184999 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185000 = DIRECTION('',(0.,0.,1.)); +#185001 = DIRECTION('',(1.,0.,-0.)); +#185002 = SHELL_BASED_SURFACE_MODEL('',(#185003)); +#185003 = OPEN_SHELL('',(#185004)); +#185004 = ADVANCED_FACE('',(#185005,#185148),#185218,.T.); +#185005 = FACE_BOUND('',#185006,.F.); +#185006 = EDGE_LOOP('',(#185007,#185018,#185026,#185034,#185043,#185051, + #185059,#185067,#185075,#185083,#185091,#185099,#185108,#185116, + #185125,#185133,#185142)); +#185007 = ORIENTED_EDGE('',*,*,#185008,.T.); +#185008 = EDGE_CURVE('',#185009,#185011,#185013,.T.); +#185009 = VERTEX_POINT('',#185010); +#185010 = CARTESIAN_POINT('',(121.906984,-90.3583,1.585)); +#185011 = VERTEX_POINT('',#185012); +#185012 = CARTESIAN_POINT('',(122.13668,-89.928456,1.585)); +#185013 = CIRCLE('',#185014,0.610092147705); +#185014 = AXIS2_PLACEMENT_3D('',#185015,#185016,#185017); +#185015 = CARTESIAN_POINT('',(122.51513074024,-90.40698234817,1.585)); +#185016 = DIRECTION('',(0.,0.,-1.)); +#185017 = DIRECTION('',(-0.99681128913,7.979507417364E-02,0.)); +#185018 = ORIENTED_EDGE('',*,*,#185019,.T.); +#185019 = EDGE_CURVE('',#185011,#185020,#185022,.T.); +#185020 = VERTEX_POINT('',#185021); +#185021 = CARTESIAN_POINT('',(122.250827,-89.87436,1.585)); +#185022 = LINE('',#185023,#185024); +#185023 = CARTESIAN_POINT('',(122.13668,-89.928456,1.585)); +#185024 = VECTOR('',#185025,1.); +#185025 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#185026 = ORIENTED_EDGE('',*,*,#185027,.T.); +#185027 = EDGE_CURVE('',#185020,#185028,#185030,.T.); +#185028 = VERTEX_POINT('',#185029); +#185029 = CARTESIAN_POINT('',(122.470567,-89.87436,1.585)); +#185030 = LINE('',#185031,#185032); +#185031 = CARTESIAN_POINT('',(122.250827,-89.87436,1.585)); +#185032 = VECTOR('',#185033,1.); +#185033 = DIRECTION('',(1.,0.,0.)); +#185034 = ORIENTED_EDGE('',*,*,#185035,.T.); +#185035 = EDGE_CURVE('',#185028,#185036,#185038,.T.); +#185036 = VERTEX_POINT('',#185037); +#185037 = CARTESIAN_POINT('',(122.455935,-90.022919,1.585)); +#185038 = CIRCLE('',#185039,7.500006711464E-02); +#185039 = AXIS2_PLACEMENT_3D('',#185040,#185041,#185042); +#185040 = CARTESIAN_POINT('',(122.45593506711,-89.94791893288,1.585)); +#185041 = DIRECTION('',(0.,0.,-1.)); +#185042 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#185043 = ORIENTED_EDGE('',*,*,#185044,.T.); +#185044 = EDGE_CURVE('',#185036,#185045,#185047,.T.); +#185045 = VERTEX_POINT('',#185046); +#185046 = CARTESIAN_POINT('',(122.283164,-90.022919,1.585)); +#185047 = LINE('',#185048,#185049); +#185048 = CARTESIAN_POINT('',(122.455935,-90.022919,1.585)); +#185049 = VECTOR('',#185050,1.); +#185050 = DIRECTION('',(-1.,0.,0.)); +#185051 = ORIENTED_EDGE('',*,*,#185052,.T.); +#185052 = EDGE_CURVE('',#185045,#185053,#185055,.T.); +#185053 = VERTEX_POINT('',#185054); +#185054 = CARTESIAN_POINT('',(122.214648,-90.057177,1.585)); +#185055 = LINE('',#185056,#185057); +#185056 = CARTESIAN_POINT('',(122.283164,-90.022919,1.585)); +#185057 = VECTOR('',#185058,1.); +#185058 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#185059 = ORIENTED_EDGE('',*,*,#185060,.T.); +#185060 = EDGE_CURVE('',#185053,#185061,#185063,.T.); +#185061 = VERTEX_POINT('',#185062); +#185062 = CARTESIAN_POINT('',(122.180886,-90.090938,1.585)); +#185063 = LINE('',#185064,#185065); +#185064 = CARTESIAN_POINT('',(122.214648,-90.057177,1.585)); +#185065 = VECTOR('',#185066,1.); +#185066 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#185067 = ORIENTED_EDGE('',*,*,#185068,.T.); +#185068 = EDGE_CURVE('',#185061,#185069,#185071,.T.); +#185069 = VERTEX_POINT('',#185070); +#185070 = CARTESIAN_POINT('',(122.096974,-90.216807,1.585)); +#185071 = LINE('',#185072,#185073); +#185072 = CARTESIAN_POINT('',(122.180886,-90.090938,1.585)); +#185073 = VECTOR('',#185074,1.); +#185074 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#185075 = ORIENTED_EDGE('',*,*,#185076,.T.); +#185076 = EDGE_CURVE('',#185069,#185077,#185079,.T.); +#185077 = VERTEX_POINT('',#185078); +#185078 = CARTESIAN_POINT('',(122.07845,-90.290904,1.585)); +#185079 = LINE('',#185080,#185081); +#185080 = CARTESIAN_POINT('',(122.096974,-90.216807,1.585)); +#185081 = VECTOR('',#185082,1.); +#185082 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#185083 = ORIENTED_EDGE('',*,*,#185084,.T.); +#185084 = EDGE_CURVE('',#185077,#185085,#185087,.T.); +#185085 = VERTEX_POINT('',#185086); +#185086 = CARTESIAN_POINT('',(122.155589,-90.255312,1.585)); +#185087 = LINE('',#185088,#185089); +#185088 = CARTESIAN_POINT('',(122.07845,-90.290904,1.585)); +#185089 = VECTOR('',#185090,1.); +#185090 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#185091 = ORIENTED_EDGE('',*,*,#185092,.T.); +#185092 = EDGE_CURVE('',#185085,#185093,#185095,.T.); +#185093 = VERTEX_POINT('',#185094); +#185094 = CARTESIAN_POINT('',(122.380506,-90.256534,1.585)); +#185095 = LINE('',#185096,#185097); +#185096 = CARTESIAN_POINT('',(122.155589,-90.255312,1.585)); +#185097 = VECTOR('',#185098,1.); +#185098 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#185099 = ORIENTED_EDGE('',*,*,#185100,.T.); +#185100 = EDGE_CURVE('',#185093,#185101,#185103,.T.); +#185101 = VERTEX_POINT('',#185102); +#185102 = CARTESIAN_POINT('',(122.624732,-90.504715,1.585)); +#185103 = CIRCLE('',#185104,0.348625649748); +#185104 = AXIS2_PLACEMENT_3D('',#185105,#185106,#185107); +#185105 = CARTESIAN_POINT('',(122.28733404586,-90.59247868387,1.585)); +#185106 = DIRECTION('',(0.,0.,-1.)); +#185107 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#185108 = ORIENTED_EDGE('',*,*,#185109,.T.); +#185109 = EDGE_CURVE('',#185101,#185110,#185112,.T.); +#185110 = VERTEX_POINT('',#185111); +#185111 = CARTESIAN_POINT('',(122.62351,-90.777252,1.585)); +#185112 = LINE('',#185113,#185114); +#185113 = CARTESIAN_POINT('',(122.624732,-90.504715,1.585)); +#185114 = VECTOR('',#185115,1.); +#185115 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#185116 = ORIENTED_EDGE('',*,*,#185117,.T.); +#185117 = EDGE_CURVE('',#185110,#185118,#185120,.T.); +#185118 = VERTEX_POINT('',#185119); +#185119 = CARTESIAN_POINT('',(122.375329,-91.021478,1.585)); +#185120 = CIRCLE('',#185121,0.348635327447); +#185121 = AXIS2_PLACEMENT_3D('',#185122,#185123,#185124); +#185122 = CARTESIAN_POINT('',(122.28755748129,-90.68407208415,1.585)); +#185123 = DIRECTION('',(0.,0.,-1.)); +#185124 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#185125 = ORIENTED_EDGE('',*,*,#185126,.T.); +#185126 = EDGE_CURVE('',#185118,#185127,#185129,.T.); +#185127 = VERTEX_POINT('',#185128); +#185128 = CARTESIAN_POINT('',(122.150411,-91.020256,1.585)); +#185129 = LINE('',#185130,#185131); +#185130 = CARTESIAN_POINT('',(122.375329,-91.021478,1.585)); +#185131 = VECTOR('',#185132,1.); +#185132 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#185133 = ORIENTED_EDGE('',*,*,#185134,.T.); +#185134 = EDGE_CURVE('',#185127,#185135,#185137,.T.); +#185135 = VERTEX_POINT('',#185136); +#185136 = CARTESIAN_POINT('',(121.906186,-90.772074,1.585)); +#185137 = CIRCLE('',#185138,0.348628446662); +#185138 = AXIS2_PLACEMENT_3D('',#185139,#185140,#185141); +#185139 = CARTESIAN_POINT('',(122.24358661322,-90.68430942847,1.585)); +#185140 = DIRECTION('',(0.,0.,-1.)); +#185141 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#185142 = ORIENTED_EDGE('',*,*,#185143,.T.); +#185143 = EDGE_CURVE('',#185135,#185009,#185144,.T.); +#185144 = LINE('',#185145,#185146); +#185145 = CARTESIAN_POINT('',(121.906186,-90.772074,1.585)); +#185146 = VECTOR('',#185147,1.); +#185147 = DIRECTION('',(1.92858544986E-03,0.999998140277,0.)); +#185148 = FACE_BOUND('',#185149,.F.); +#185149 = EDGE_LOOP('',(#185150,#185161,#185169,#185178,#185186,#185195, + #185203,#185212)); +#185150 = ORIENTED_EDGE('',*,*,#185151,.T.); +#185151 = EDGE_CURVE('',#185152,#185154,#185156,.T.); +#185152 = VERTEX_POINT('',#185153); +#185153 = CARTESIAN_POINT('',(122.411508,-90.438129,1.585)); +#185154 = VERTEX_POINT('',#185155); +#185155 = CARTESIAN_POINT('',(122.11941,-90.438129,1.585)); +#185156 = CIRCLE('',#185157,0.252889603602); +#185157 = AXIS2_PLACEMENT_3D('',#185158,#185159,#185160); +#185158 = CARTESIAN_POINT('',(122.265459,-90.644582,1.585)); +#185159 = DIRECTION('',(0.,0.,1.)); +#185160 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#185161 = ORIENTED_EDGE('',*,*,#185162,.T.); +#185162 = EDGE_CURVE('',#185154,#185163,#185165,.T.); +#185163 = VERTEX_POINT('',#185164); +#185164 = CARTESIAN_POINT('',(122.089003,-90.468536,1.585)); +#185165 = LINE('',#185166,#185167); +#185166 = CARTESIAN_POINT('',(122.11941,-90.438129,1.585)); +#185167 = VECTOR('',#185168,1.); +#185168 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#185169 = ORIENTED_EDGE('',*,*,#185170,.T.); +#185170 = EDGE_CURVE('',#185163,#185171,#185173,.T.); +#185171 = VERTEX_POINT('',#185172); +#185172 = CARTESIAN_POINT('',(122.089003,-90.808253,1.585)); +#185173 = CIRCLE('',#185174,0.305621483548); +#185174 = AXIS2_PLACEMENT_3D('',#185175,#185176,#185177); +#185175 = CARTESIAN_POINT('',(122.343075,-90.6383945,1.585)); +#185176 = DIRECTION('',(0.,0.,1.)); +#185177 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#185178 = ORIENTED_EDGE('',*,*,#185179,.T.); +#185179 = EDGE_CURVE('',#185171,#185180,#185182,.T.); +#185180 = VERTEX_POINT('',#185181); +#185181 = CARTESIAN_POINT('',(122.11941,-90.838661,1.585)); +#185182 = LINE('',#185183,#185184); +#185183 = CARTESIAN_POINT('',(122.089003,-90.808253,1.585)); +#185184 = VECTOR('',#185185,1.); +#185185 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#185186 = ORIENTED_EDGE('',*,*,#185187,.T.); +#185187 = EDGE_CURVE('',#185180,#185188,#185190,.T.); +#185188 = VERTEX_POINT('',#185189); +#185189 = CARTESIAN_POINT('',(122.411507,-90.838661,1.585)); +#185190 = CIRCLE('',#185191,0.252888498466); +#185191 = AXIS2_PLACEMENT_3D('',#185192,#185193,#185194); +#185192 = CARTESIAN_POINT('',(122.2654585,-90.632209,1.585)); +#185193 = DIRECTION('',(0.,0.,1.)); +#185194 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#185195 = ORIENTED_EDGE('',*,*,#185196,.T.); +#185196 = EDGE_CURVE('',#185188,#185197,#185199,.T.); +#185197 = VERTEX_POINT('',#185198); +#185198 = CARTESIAN_POINT('',(122.441914,-90.808253,1.585)); +#185199 = LINE('',#185200,#185201); +#185200 = CARTESIAN_POINT('',(122.411507,-90.838661,1.585)); +#185201 = VECTOR('',#185202,1.); +#185202 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#185203 = ORIENTED_EDGE('',*,*,#185204,.T.); +#185204 = EDGE_CURVE('',#185197,#185205,#185207,.T.); +#185205 = VERTEX_POINT('',#185206); +#185206 = CARTESIAN_POINT('',(122.441915,-90.468536,1.585)); +#185207 = CIRCLE('',#185208,0.305616146029); +#185208 = AXIS2_PLACEMENT_3D('',#185209,#185210,#185211); +#185209 = CARTESIAN_POINT('',(122.18784892049,-90.63839375212,1.585)); +#185210 = DIRECTION('',(0.,-0.,1.)); +#185211 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#185212 = ORIENTED_EDGE('',*,*,#185213,.T.); +#185213 = EDGE_CURVE('',#185205,#185152,#185214,.T.); +#185214 = LINE('',#185215,#185216); +#185215 = CARTESIAN_POINT('',(122.441915,-90.468536,1.585)); +#185216 = VECTOR('',#185217,1.); +#185217 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#185218 = PLANE('',#185219); +#185219 = AXIS2_PLACEMENT_3D('',#185220,#185221,#185222); +#185220 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185221 = DIRECTION('',(0.,0.,1.)); +#185222 = DIRECTION('',(1.,0.,-0.)); +#185223 = SHELL_BASED_SURFACE_MODEL('',(#185224)); +#185224 = OPEN_SHELL('',(#185225)); +#185225 = ADVANCED_FACE('',(#185226),#185262,.T.); +#185226 = FACE_BOUND('',#185227,.F.); +#185227 = EDGE_LOOP('',(#185228,#185239,#185247,#185256)); +#185228 = ORIENTED_EDGE('',*,*,#185229,.T.); +#185229 = EDGE_CURVE('',#185230,#185232,#185234,.T.); +#185230 = VERTEX_POINT('',#185231); +#185231 = CARTESIAN_POINT('',(134.629392,-90.8606,1.585)); +#185232 = VERTEX_POINT('',#185233); +#185233 = CARTESIAN_POINT('',(134.629392,-90.7406,1.585)); +#185234 = CIRCLE('',#185235,6.000000000043E-02); +#185235 = AXIS2_PLACEMENT_3D('',#185236,#185237,#185238); +#185236 = CARTESIAN_POINT('',(134.62939177441,-90.8006,1.585)); +#185237 = DIRECTION('',(0.,0.,-1.)); +#185238 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#185239 = ORIENTED_EDGE('',*,*,#185240,.T.); +#185240 = EDGE_CURVE('',#185232,#185241,#185243,.T.); +#185241 = VERTEX_POINT('',#185242); +#185242 = CARTESIAN_POINT('',(135.103908,-90.7406,1.585)); +#185243 = LINE('',#185244,#185245); +#185244 = CARTESIAN_POINT('',(134.629392,-90.7406,1.585)); +#185245 = VECTOR('',#185246,1.); +#185246 = DIRECTION('',(1.,0.,0.)); +#185247 = ORIENTED_EDGE('',*,*,#185248,.T.); +#185248 = EDGE_CURVE('',#185241,#185249,#185251,.T.); +#185249 = VERTEX_POINT('',#185250); +#185250 = CARTESIAN_POINT('',(135.103908,-90.8606,1.585)); +#185251 = CIRCLE('',#185252,6.000000000043E-02); +#185252 = AXIS2_PLACEMENT_3D('',#185253,#185254,#185255); +#185253 = CARTESIAN_POINT('',(135.10390822558,-90.8006,1.585)); +#185254 = DIRECTION('',(0.,0.,-1.)); +#185255 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#185256 = ORIENTED_EDGE('',*,*,#185257,.T.); +#185257 = EDGE_CURVE('',#185249,#185230,#185258,.T.); +#185258 = LINE('',#185259,#185260); +#185259 = CARTESIAN_POINT('',(135.103908,-90.8606,1.585)); +#185260 = VECTOR('',#185261,1.); +#185261 = DIRECTION('',(-1.,0.,0.)); +#185262 = PLANE('',#185263); +#185263 = AXIS2_PLACEMENT_3D('',#185264,#185265,#185266); +#185264 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185265 = DIRECTION('',(0.,0.,1.)); +#185266 = DIRECTION('',(1.,0.,-0.)); +#185267 = SHELL_BASED_SURFACE_MODEL('',(#185268)); +#185268 = OPEN_SHELL('',(#185269)); +#185269 = ADVANCED_FACE('',(#185270,#185386),#185469,.T.); +#185270 = FACE_BOUND('',#185271,.F.); +#185271 = EDGE_LOOP('',(#185272,#185283,#185291,#185299,#185307,#185315, + #185323,#185331,#185339,#185347,#185355,#185363,#185371,#185380)); +#185272 = ORIENTED_EDGE('',*,*,#185273,.T.); +#185273 = EDGE_CURVE('',#185274,#185276,#185278,.T.); +#185274 = VERTEX_POINT('',#185275); +#185275 = CARTESIAN_POINT('',(201.588346,-89.740187,1.585)); +#185276 = VERTEX_POINT('',#185277); +#185277 = CARTESIAN_POINT('',(201.661905,-89.679819,1.585)); +#185278 = CIRCLE('',#185279,7.500074938985E-02); +#185279 = AXIS2_PLACEMENT_3D('',#185280,#185281,#185282); +#185280 = CARTESIAN_POINT('',(201.66190546611,-89.75481974938,1.585)); +#185281 = DIRECTION('',(0.,0.,-1.)); +#185282 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#185283 = ORIENTED_EDGE('',*,*,#185284,.T.); +#185284 = EDGE_CURVE('',#185276,#185285,#185287,.T.); +#185285 = VERTEX_POINT('',#185286); +#185286 = CARTESIAN_POINT('',(201.907405,-89.680548,1.585)); +#185287 = LINE('',#185288,#185289); +#185288 = CARTESIAN_POINT('',(201.661905,-89.679819,1.585)); +#185289 = VECTOR('',#185290,1.); +#185290 = DIRECTION('',(0.999995591212,-2.969437010185E-03,0.)); +#185291 = ORIENTED_EDGE('',*,*,#185292,.T.); +#185292 = EDGE_CURVE('',#185285,#185293,#185295,.T.); +#185293 = VERTEX_POINT('',#185294); +#185294 = CARTESIAN_POINT('',(202.084525,-89.740078,1.585)); +#185295 = LINE('',#185296,#185297); +#185296 = CARTESIAN_POINT('',(201.907405,-89.680548,1.585)); +#185297 = VECTOR('',#185298,1.); +#185298 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#185299 = ORIENTED_EDGE('',*,*,#185300,.T.); +#185300 = EDGE_CURVE('',#185293,#185301,#185303,.T.); +#185301 = VERTEX_POINT('',#185302); +#185302 = CARTESIAN_POINT('',(202.201214,-89.85784,1.585)); +#185303 = LINE('',#185304,#185305); +#185304 = CARTESIAN_POINT('',(202.084525,-89.740078,1.585)); +#185305 = VECTOR('',#185306,1.); +#185306 = DIRECTION('',(0.703863230025,-0.710335521722,0.)); +#185307 = ORIENTED_EDGE('',*,*,#185308,.T.); +#185308 = EDGE_CURVE('',#185301,#185309,#185311,.T.); +#185309 = VERTEX_POINT('',#185310); +#185310 = CARTESIAN_POINT('',(202.258475,-89.974724,1.585)); +#185311 = LINE('',#185312,#185313); +#185312 = CARTESIAN_POINT('',(202.201214,-89.85784,1.585)); +#185313 = VECTOR('',#185314,1.); +#185314 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#185315 = ORIENTED_EDGE('',*,*,#185316,.T.); +#185316 = EDGE_CURVE('',#185309,#185317,#185319,.T.); +#185317 = VERTEX_POINT('',#185318); +#185318 = CARTESIAN_POINT('',(202.308333,-90.18339,1.585)); +#185319 = LINE('',#185320,#185321); +#185320 = CARTESIAN_POINT('',(202.258475,-89.974724,1.585)); +#185321 = VECTOR('',#185322,1.); +#185322 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#185323 = ORIENTED_EDGE('',*,*,#185324,.T.); +#185324 = EDGE_CURVE('',#185317,#185325,#185327,.T.); +#185325 = VERTEX_POINT('',#185326); +#185326 = CARTESIAN_POINT('',(202.306094,-90.344437,1.585)); +#185327 = LINE('',#185328,#185329); +#185328 = CARTESIAN_POINT('',(202.308333,-90.18339,1.585)); +#185329 = VECTOR('',#185330,1.); +#185330 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#185331 = ORIENTED_EDGE('',*,*,#185332,.T.); +#185332 = EDGE_CURVE('',#185325,#185333,#185335,.T.); +#185333 = VERTEX_POINT('',#185334); +#185334 = CARTESIAN_POINT('',(202.252796,-90.550264,1.585)); +#185335 = LINE('',#185336,#185337); +#185336 = CARTESIAN_POINT('',(202.306094,-90.344437,1.585)); +#185337 = VECTOR('',#185338,1.); +#185338 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#185339 = ORIENTED_EDGE('',*,*,#185340,.T.); +#185340 = EDGE_CURVE('',#185333,#185341,#185343,.T.); +#185341 = VERTEX_POINT('',#185342); +#185342 = CARTESIAN_POINT('',(202.195846,-90.659244,1.585)); +#185343 = LINE('',#185344,#185345); +#185344 = CARTESIAN_POINT('',(202.252796,-90.550264,1.585)); +#185345 = VECTOR('',#185346,1.); +#185346 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#185347 = ORIENTED_EDGE('',*,*,#185348,.T.); +#185348 = EDGE_CURVE('',#185341,#185349,#185351,.T.); +#185349 = VERTEX_POINT('',#185350); +#185350 = CARTESIAN_POINT('',(202.079999,-90.772357,1.585)); +#185351 = LINE('',#185352,#185353); +#185352 = CARTESIAN_POINT('',(202.195846,-90.659244,1.585)); +#185353 = VECTOR('',#185354,1.); +#185354 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#185355 = ORIENTED_EDGE('',*,*,#185356,.T.); +#185356 = EDGE_CURVE('',#185349,#185357,#185359,.T.); +#185357 = VERTEX_POINT('',#185358); +#185358 = CARTESIAN_POINT('',(201.907405,-90.829089,1.585)); +#185359 = LINE('',#185360,#185361); +#185360 = CARTESIAN_POINT('',(202.079999,-90.772357,1.585)); +#185361 = VECTOR('',#185362,1.); +#185362 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#185363 = ORIENTED_EDGE('',*,*,#185364,.T.); +#185364 = EDGE_CURVE('',#185357,#185365,#185367,.T.); +#185365 = VERTEX_POINT('',#185366); +#185366 = CARTESIAN_POINT('',(201.647273,-90.828378,1.585)); +#185367 = LINE('',#185368,#185369); +#185368 = CARTESIAN_POINT('',(201.907405,-90.829089,1.585)); +#185369 = VECTOR('',#185370,1.); +#185370 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#185371 = ORIENTED_EDGE('',*,*,#185372,.T.); +#185372 = EDGE_CURVE('',#185365,#185373,#185375,.T.); +#185373 = VERTEX_POINT('',#185374); +#185374 = CARTESIAN_POINT('',(201.586905,-90.754819,1.585)); +#185375 = CIRCLE('',#185376,7.500074938986E-02); +#185376 = AXIS2_PLACEMENT_3D('',#185377,#185378,#185379); +#185377 = CARTESIAN_POINT('',(201.66190574938,-90.75481853389,1.585)); +#185378 = DIRECTION('',(0.,0.,-1.)); +#185379 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#185380 = ORIENTED_EDGE('',*,*,#185381,.T.); +#185381 = EDGE_CURVE('',#185373,#185274,#185382,.T.); +#185382 = LINE('',#185383,#185384); +#185383 = CARTESIAN_POINT('',(201.586905,-90.754819,1.585)); +#185384 = VECTOR('',#185385,1.); +#185385 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#185386 = FACE_BOUND('',#185387,.F.); +#185387 = EDGE_LOOP('',(#185388,#185398,#185406,#185414,#185422,#185430, + #185438,#185447,#185455,#185463)); +#185388 = ORIENTED_EDGE('',*,*,#185389,.T.); +#185389 = EDGE_CURVE('',#185390,#185392,#185394,.T.); +#185390 = VERTEX_POINT('',#185391); +#185391 = CARTESIAN_POINT('',(202.002343,-89.86799,1.585)); +#185392 = VERTEX_POINT('',#185393); +#185393 = CARTESIAN_POINT('',(201.88783,-89.829819,1.585)); +#185394 = LINE('',#185395,#185396); +#185395 = CARTESIAN_POINT('',(202.002343,-89.86799,1.585)); +#185396 = VECTOR('',#185397,1.); +#185397 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#185398 = ORIENTED_EDGE('',*,*,#185399,.T.); +#185399 = EDGE_CURVE('',#185392,#185400,#185402,.T.); +#185400 = VERTEX_POINT('',#185401); +#185401 = CARTESIAN_POINT('',(201.736905,-89.829819,1.585)); +#185402 = LINE('',#185403,#185404); +#185403 = CARTESIAN_POINT('',(201.88783,-89.829819,1.585)); +#185404 = VECTOR('',#185405,1.); +#185405 = DIRECTION('',(-1.,0.,0.)); +#185406 = ORIENTED_EDGE('',*,*,#185407,.T.); +#185407 = EDGE_CURVE('',#185400,#185408,#185410,.T.); +#185408 = VERTEX_POINT('',#185409); +#185409 = CARTESIAN_POINT('',(201.736905,-90.679819,1.585)); +#185410 = LINE('',#185411,#185412); +#185411 = CARTESIAN_POINT('',(201.736905,-89.829819,1.585)); +#185412 = VECTOR('',#185413,1.); +#185413 = DIRECTION('',(0.,-1.,0.)); +#185414 = ORIENTED_EDGE('',*,*,#185415,.T.); +#185415 = EDGE_CURVE('',#185408,#185416,#185418,.T.); +#185416 = VERTEX_POINT('',#185417); +#185417 = CARTESIAN_POINT('',(201.88783,-90.679819,1.585)); +#185418 = LINE('',#185419,#185420); +#185419 = CARTESIAN_POINT('',(201.736905,-90.679819,1.585)); +#185420 = VECTOR('',#185421,1.); +#185421 = DIRECTION('',(1.,0.,0.)); +#185422 = ORIENTED_EDGE('',*,*,#185423,.T.); +#185423 = EDGE_CURVE('',#185416,#185424,#185426,.T.); +#185424 = VERTEX_POINT('',#185425); +#185425 = CARTESIAN_POINT('',(202.002343,-90.641647,1.585)); +#185426 = LINE('',#185427,#185428); +#185427 = CARTESIAN_POINT('',(201.88783,-90.679819,1.585)); +#185428 = VECTOR('',#185429,1.); +#185429 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#185430 = ORIENTED_EDGE('',*,*,#185431,.T.); +#185431 = EDGE_CURVE('',#185424,#185432,#185434,.T.); +#185432 = VERTEX_POINT('',#185433); +#185433 = CARTESIAN_POINT('',(202.076455,-90.567534,1.585)); +#185434 = LINE('',#185435,#185436); +#185435 = CARTESIAN_POINT('',(202.002343,-90.641647,1.585)); +#185436 = VECTOR('',#185437,1.); +#185437 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#185438 = ORIENTED_EDGE('',*,*,#185439,.T.); +#185439 = EDGE_CURVE('',#185432,#185440,#185442,.T.); +#185440 = VERTEX_POINT('',#185441); +#185441 = CARTESIAN_POINT('',(202.158333,-90.192624,1.585)); +#185442 = CIRCLE('',#185443,0.611719141131); +#185443 = AXIS2_PLACEMENT_3D('',#185444,#185445,#185446); +#185444 = CARTESIAN_POINT('',(201.54992096224,-90.25614643649,1.585)); +#185445 = DIRECTION('',(0.,0.,1.)); +#185446 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#185447 = ORIENTED_EDGE('',*,*,#185448,.T.); +#185448 = EDGE_CURVE('',#185440,#185449,#185451,.T.); +#185449 = VERTEX_POINT('',#185450); +#185450 = CARTESIAN_POINT('',(202.114949,-90.01909,1.585)); +#185451 = LINE('',#185452,#185453); +#185452 = CARTESIAN_POINT('',(202.158333,-90.192624,1.585)); +#185453 = VECTOR('',#185454,1.); +#185454 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#185455 = ORIENTED_EDGE('',*,*,#185456,.T.); +#185456 = EDGE_CURVE('',#185449,#185457,#185459,.T.); +#185457 = VERTEX_POINT('',#185458); +#185458 = CARTESIAN_POINT('',(202.076456,-89.942103,1.585)); +#185459 = LINE('',#185460,#185461); +#185460 = CARTESIAN_POINT('',(202.114949,-90.01909,1.585)); +#185461 = VECTOR('',#185462,1.); +#185462 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#185463 = ORIENTED_EDGE('',*,*,#185464,.T.); +#185464 = EDGE_CURVE('',#185457,#185390,#185465,.T.); +#185465 = LINE('',#185466,#185467); +#185466 = CARTESIAN_POINT('',(202.076456,-89.942103,1.585)); +#185467 = VECTOR('',#185468,1.); +#185468 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#185469 = PLANE('',#185470); +#185470 = AXIS2_PLACEMENT_3D('',#185471,#185472,#185473); +#185471 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185472 = DIRECTION('',(0.,0.,1.)); +#185473 = DIRECTION('',(1.,0.,-0.)); +#185474 = SHELL_BASED_SURFACE_MODEL('',(#185475)); +#185475 = OPEN_SHELL('',(#185476)); +#185476 = ADVANCED_FACE('',(#185477),#185750,.T.); +#185477 = FACE_BOUND('',#185478,.F.); +#185478 = EDGE_LOOP('',(#185479,#185490,#185498,#185506,#185514,#185523, + #185531,#185539,#185547,#185555,#185564,#185572,#185580,#185588, + #185597,#185605,#185613,#185621,#185630,#185638,#185647,#185655, + #185663,#185671,#185680,#185688,#185696,#185704,#185712,#185720, + #185728,#185736,#185744)); +#185479 = ORIENTED_EDGE('',*,*,#185480,.T.); +#185480 = EDGE_CURVE('',#185481,#185483,#185485,.T.); +#185481 = VERTEX_POINT('',#185482); +#185482 = CARTESIAN_POINT('',(203.816664,-89.72472,1.585)); +#185483 = VERTEX_POINT('',#185484); +#185484 = CARTESIAN_POINT('',(204.02472,-89.683336,1.585)); +#185485 = CIRCLE('',#185486,0.149999609329); +#185486 = AXIS2_PLACEMENT_3D('',#185487,#185488,#185489); +#185487 = CARTESIAN_POINT('',(203.9000000777,-89.60000039067,1.585)); +#185488 = DIRECTION('',(0.,0.,1.)); +#185489 = DIRECTION('',(-0.555575298365,-0.831466227725,0.)); +#185490 = ORIENTED_EDGE('',*,*,#185491,.T.); +#185491 = EDGE_CURVE('',#185483,#185492,#185494,.T.); +#185492 = VERTEX_POINT('',#185493); +#185493 = CARTESIAN_POINT('',(204.025636,-89.681122,1.585)); +#185494 = LINE('',#185495,#185496); +#185495 = CARTESIAN_POINT('',(204.02472,-89.683336,1.585)); +#185496 = VECTOR('',#185497,1.); +#185497 = DIRECTION('',(0.382302641044,0.924037169518,0.)); +#185498 = ORIENTED_EDGE('',*,*,#185499,.T.); +#185499 = EDGE_CURVE('',#185492,#185500,#185502,.T.); +#185500 = VERTEX_POINT('',#185501); +#185501 = CARTESIAN_POINT('',(204.057489,-89.68126,1.585)); +#185502 = LINE('',#185503,#185504); +#185503 = CARTESIAN_POINT('',(204.025636,-89.681122,1.585)); +#185504 = VECTOR('',#185505,1.); +#185505 = DIRECTION('',(0.999990615279,-4.332361312939E-03,0.)); +#185506 = ORIENTED_EDGE('',*,*,#185507,.T.); +#185507 = EDGE_CURVE('',#185500,#185508,#185510,.T.); +#185508 = VERTEX_POINT('',#185509); +#185509 = CARTESIAN_POINT('',(204.184079,-89.743188,1.585)); +#185510 = LINE('',#185511,#185512); +#185511 = CARTESIAN_POINT('',(204.057489,-89.68126,1.585)); +#185512 = VECTOR('',#185513,1.); +#185513 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#185514 = ORIENTED_EDGE('',*,*,#185515,.T.); +#185515 = EDGE_CURVE('',#185508,#185516,#185518,.T.); +#185516 = VERTEX_POINT('',#185517); +#185517 = CARTESIAN_POINT('',(204.104554,-89.86952,1.585)); +#185518 = CIRCLE('',#185519,7.500029440361E-02); +#185519 = AXIS2_PLACEMENT_3D('',#185520,#185521,#185522); +#185520 = CARTESIAN_POINT('',(204.13809505397,-89.80243764867,1.585)); +#185521 = DIRECTION('',(0.,0.,-1.)); +#185522 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#185523 = ORIENTED_EDGE('',*,*,#185524,.T.); +#185524 = EDGE_CURVE('',#185516,#185525,#185527,.T.); +#185525 = VERTEX_POINT('',#185526); +#185526 = CARTESIAN_POINT('',(204.025152,-89.829819,1.585)); +#185527 = LINE('',#185528,#185529); +#185528 = CARTESIAN_POINT('',(204.104554,-89.86952,1.585)); +#185529 = VECTOR('',#185530,1.); +#185530 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#185531 = ORIENTED_EDGE('',*,*,#185532,.T.); +#185532 = EDGE_CURVE('',#185525,#185533,#185535,.T.); +#185533 = VERTEX_POINT('',#185534); +#185534 = CARTESIAN_POINT('',(203.91217,-89.829819,1.585)); +#185535 = LINE('',#185536,#185537); +#185536 = CARTESIAN_POINT('',(204.025152,-89.829819,1.585)); +#185537 = VECTOR('',#185538,1.); +#185538 = DIRECTION('',(-1.,0.,0.)); +#185539 = ORIENTED_EDGE('',*,*,#185540,.T.); +#185540 = EDGE_CURVE('',#185533,#185541,#185543,.T.); +#185541 = VERTEX_POINT('',#185542); +#185542 = CARTESIAN_POINT('',(203.797657,-89.86799,1.585)); +#185543 = LINE('',#185544,#185545); +#185544 = CARTESIAN_POINT('',(203.91217,-89.829819,1.585)); +#185545 = VECTOR('',#185546,1.); +#185546 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#185547 = ORIENTED_EDGE('',*,*,#185548,.T.); +#185548 = EDGE_CURVE('',#185541,#185549,#185551,.T.); +#185549 = VERTEX_POINT('',#185550); +#185550 = CARTESIAN_POINT('',(203.723544,-89.942103,1.585)); +#185551 = LINE('',#185552,#185553); +#185552 = CARTESIAN_POINT('',(203.797657,-89.86799,1.585)); +#185553 = VECTOR('',#185554,1.); +#185554 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#185555 = ORIENTED_EDGE('',*,*,#185556,.T.); +#185556 = EDGE_CURVE('',#185549,#185557,#185559,.T.); +#185557 = VERTEX_POINT('',#185558); +#185558 = CARTESIAN_POINT('',(203.641667,-90.317013,1.585)); +#185559 = CIRCLE('',#185560,0.611712714362); +#185560 = AXIS2_PLACEMENT_3D('',#185561,#185562,#185563); +#185561 = CARTESIAN_POINT('',(204.25007227521,-90.2534876822,1.585)); +#185562 = DIRECTION('',(0.,0.,1.)); +#185563 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#185564 = ORIENTED_EDGE('',*,*,#185565,.T.); +#185565 = EDGE_CURVE('',#185557,#185566,#185568,.T.); +#185566 = VERTEX_POINT('',#185567); +#185567 = CARTESIAN_POINT('',(203.68505,-90.490547,1.585)); +#185568 = LINE('',#185569,#185570); +#185569 = CARTESIAN_POINT('',(203.641667,-90.317013,1.585)); +#185570 = VECTOR('',#185571,1.); +#185571 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#185572 = ORIENTED_EDGE('',*,*,#185573,.T.); +#185573 = EDGE_CURVE('',#185566,#185574,#185576,.T.); +#185574 = VERTEX_POINT('',#185575); +#185575 = CARTESIAN_POINT('',(203.723544,-90.567534,1.585)); +#185576 = LINE('',#185577,#185578); +#185577 = CARTESIAN_POINT('',(203.68505,-90.490547,1.585)); +#185578 = VECTOR('',#185579,1.); +#185579 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#185580 = ORIENTED_EDGE('',*,*,#185581,.T.); +#185581 = EDGE_CURVE('',#185574,#185582,#185584,.T.); +#185582 = VERTEX_POINT('',#185583); +#185583 = CARTESIAN_POINT('',(203.797657,-90.641648,1.585)); +#185584 = LINE('',#185585,#185586); +#185585 = CARTESIAN_POINT('',(203.723544,-90.567534,1.585)); +#185586 = VECTOR('',#185587,1.); +#185587 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#185588 = ORIENTED_EDGE('',*,*,#185589,.T.); +#185589 = EDGE_CURVE('',#185582,#185590,#185592,.T.); +#185590 = VERTEX_POINT('',#185591); +#185591 = CARTESIAN_POINT('',(204.097581,-90.641647,1.585)); +#185592 = CIRCLE('',#185593,0.299305962385); +#185593 = AXIS2_PLACEMENT_3D('',#185594,#185595,#185596); +#185594 = CARTESIAN_POINT('',(203.94761813635,-90.38261959093,1.585)); +#185595 = DIRECTION('',(0.,0.,1.)); +#185596 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#185597 = ORIENTED_EDGE('',*,*,#185598,.T.); +#185598 = EDGE_CURVE('',#185590,#185599,#185601,.T.); +#185599 = VERTEX_POINT('',#185600); +#185600 = CARTESIAN_POINT('',(204.110714,-90.628514,1.585)); +#185601 = LINE('',#185602,#185603); +#185602 = CARTESIAN_POINT('',(204.097581,-90.641647,1.585)); +#185603 = VECTOR('',#185604,1.); +#185604 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#185605 = ORIENTED_EDGE('',*,*,#185606,.T.); +#185606 = EDGE_CURVE('',#185599,#185607,#185609,.T.); +#185607 = VERTEX_POINT('',#185608); +#185608 = CARTESIAN_POINT('',(204.110714,-90.401247,1.585)); +#185609 = LINE('',#185610,#185611); +#185610 = CARTESIAN_POINT('',(204.110714,-90.628514,1.585)); +#185611 = VECTOR('',#185612,1.); +#185612 = DIRECTION('',(0.,1.,0.)); +#185613 = ORIENTED_EDGE('',*,*,#185614,.T.); +#185614 = EDGE_CURVE('',#185607,#185615,#185617,.T.); +#185615 = VERTEX_POINT('',#185616); +#185616 = CARTESIAN_POINT('',(203.980606,-90.399806,1.585)); +#185617 = LINE('',#185618,#185619); +#185618 = CARTESIAN_POINT('',(204.110714,-90.401247,1.585)); +#185619 = VECTOR('',#185620,1.); +#185620 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#185621 = ORIENTED_EDGE('',*,*,#185622,.T.); +#185622 = EDGE_CURVE('',#185615,#185623,#185625,.T.); +#185623 = VERTEX_POINT('',#185624); +#185624 = CARTESIAN_POINT('',(203.995238,-90.251247,1.585)); +#185625 = CIRCLE('',#185626,7.500006711464E-02); +#185626 = AXIS2_PLACEMENT_3D('',#185627,#185628,#185629); +#185627 = CARTESIAN_POINT('',(203.99523793288,-90.32624706711,1.585)); +#185628 = DIRECTION('',(0.,0.,-1.)); +#185629 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#185630 = ORIENTED_EDGE('',*,*,#185631,.T.); +#185631 = EDGE_CURVE('',#185623,#185632,#185634,.T.); +#185632 = VERTEX_POINT('',#185633); +#185633 = CARTESIAN_POINT('',(204.200346,-90.252688,1.585)); +#185634 = LINE('',#185635,#185636); +#185635 = CARTESIAN_POINT('',(203.995238,-90.251247,1.585)); +#185636 = VECTOR('',#185637,1.); +#185637 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#185638 = ORIENTED_EDGE('',*,*,#185639,.T.); +#185639 = EDGE_CURVE('',#185632,#185640,#185642,.T.); +#185640 = VERTEX_POINT('',#185641); +#185641 = CARTESIAN_POINT('',(204.260714,-90.326247,1.585)); +#185642 = CIRCLE('',#185643,7.500074938982E-02); +#185643 = AXIS2_PLACEMENT_3D('',#185644,#185645,#185646); +#185644 = CARTESIAN_POINT('',(204.18571325061,-90.32624746611,1.585)); +#185645 = DIRECTION('',(0.,0.,-1.)); +#185646 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#185647 = ORIENTED_EDGE('',*,*,#185648,.T.); +#185648 = EDGE_CURVE('',#185640,#185649,#185651,.T.); +#185649 = VERTEX_POINT('',#185650); +#185650 = CARTESIAN_POINT('',(204.259273,-90.674212,1.585)); +#185651 = LINE('',#185652,#185653); +#185652 = CARTESIAN_POINT('',(204.260714,-90.326247,1.585)); +#185653 = VECTOR('',#185654,1.); +#185654 = DIRECTION('',(-4.141185589904E-03,-0.999991425254,0.)); +#185655 = ORIENTED_EDGE('',*,*,#185656,.T.); +#185656 = EDGE_CURVE('',#185649,#185657,#185659,.T.); +#185657 = VERTEX_POINT('',#185658); +#185658 = CARTESIAN_POINT('',(204.238747,-90.712613,1.585)); +#185659 = LINE('',#185660,#185661); +#185660 = CARTESIAN_POINT('',(204.259273,-90.674212,1.585)); +#185661 = VECTOR('',#185662,1.); +#185662 = DIRECTION('',(-0.471400985779,-0.881918993223,0.)); +#185663 = ORIENTED_EDGE('',*,*,#185664,.T.); +#185664 = EDGE_CURVE('',#185657,#185665,#185667,.T.); +#185665 = VERTEX_POINT('',#185666); +#185666 = CARTESIAN_POINT('',(204.175237,-90.772357,1.585)); +#185667 = LINE('',#185668,#185669); +#185668 = CARTESIAN_POINT('',(204.238747,-90.712613,1.585)); +#185669 = VECTOR('',#185670,1.); +#185670 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#185671 = ORIENTED_EDGE('',*,*,#185672,.T.); +#185672 = EDGE_CURVE('',#185665,#185673,#185675,.T.); +#185673 = VERTEX_POINT('',#185674); +#185674 = CARTESIAN_POINT('',(203.715475,-90.769561,1.585)); +#185675 = CIRCLE('',#185676,0.461067828848); +#185676 = AXIS2_PLACEMENT_3D('',#185677,#185678,#185679); +#185677 = CARTESIAN_POINT('',(203.94778651268,-90.37129613352,1.585)); +#185678 = DIRECTION('',(-0.,0.,-1.)); +#185679 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#185680 = ORIENTED_EDGE('',*,*,#185681,.T.); +#185681 = EDGE_CURVE('',#185673,#185682,#185684,.T.); +#185682 = VERTEX_POINT('',#185683); +#185683 = CARTESIAN_POINT('',(203.598786,-90.651798,1.585)); +#185684 = LINE('',#185685,#185686); +#185685 = CARTESIAN_POINT('',(203.715475,-90.769561,1.585)); +#185686 = VECTOR('',#185687,1.); +#185687 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#185688 = ORIENTED_EDGE('',*,*,#185689,.T.); +#185689 = EDGE_CURVE('',#185682,#185690,#185692,.T.); +#185690 = VERTEX_POINT('',#185691); +#185691 = CARTESIAN_POINT('',(203.541525,-90.534913,1.585)); +#185692 = LINE('',#185693,#185694); +#185693 = CARTESIAN_POINT('',(203.598786,-90.651798,1.585)); +#185694 = VECTOR('',#185695,1.); +#185695 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#185696 = ORIENTED_EDGE('',*,*,#185697,.T.); +#185697 = EDGE_CURVE('',#185690,#185698,#185700,.T.); +#185698 = VERTEX_POINT('',#185699); +#185699 = CARTESIAN_POINT('',(203.491667,-90.326247,1.585)); +#185700 = LINE('',#185701,#185702); +#185701 = CARTESIAN_POINT('',(203.541525,-90.534913,1.585)); +#185702 = VECTOR('',#185703,1.); +#185703 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#185704 = ORIENTED_EDGE('',*,*,#185705,.T.); +#185705 = EDGE_CURVE('',#185698,#185706,#185708,.T.); +#185706 = VERTEX_POINT('',#185707); +#185707 = CARTESIAN_POINT('',(203.493906,-90.1652,1.585)); +#185708 = LINE('',#185709,#185710); +#185709 = CARTESIAN_POINT('',(203.491667,-90.326247,1.585)); +#185710 = VECTOR('',#185711,1.); +#185711 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#185712 = ORIENTED_EDGE('',*,*,#185713,.T.); +#185713 = EDGE_CURVE('',#185706,#185714,#185716,.T.); +#185714 = VERTEX_POINT('',#185715); +#185715 = CARTESIAN_POINT('',(203.547204,-89.959373,1.585)); +#185716 = LINE('',#185717,#185718); +#185717 = CARTESIAN_POINT('',(203.493906,-90.1652,1.585)); +#185718 = VECTOR('',#185719,1.); +#185719 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#185720 = ORIENTED_EDGE('',*,*,#185721,.T.); +#185721 = EDGE_CURVE('',#185714,#185722,#185724,.T.); +#185722 = VERTEX_POINT('',#185723); +#185723 = CARTESIAN_POINT('',(203.604153,-89.850392,1.585)); +#185724 = LINE('',#185725,#185726); +#185725 = CARTESIAN_POINT('',(203.547204,-89.959373,1.585)); +#185726 = VECTOR('',#185727,1.); +#185727 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#185728 = ORIENTED_EDGE('',*,*,#185729,.T.); +#185729 = EDGE_CURVE('',#185722,#185730,#185732,.T.); +#185730 = VERTEX_POINT('',#185731); +#185731 = CARTESIAN_POINT('',(203.72,-89.737281,1.585)); +#185732 = LINE('',#185733,#185734); +#185733 = CARTESIAN_POINT('',(203.604153,-89.850392,1.585)); +#185734 = VECTOR('',#185735,1.); +#185735 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#185736 = ORIENTED_EDGE('',*,*,#185737,.T.); +#185737 = EDGE_CURVE('',#185730,#185738,#185740,.T.); +#185738 = VERTEX_POINT('',#185739); +#185739 = CARTESIAN_POINT('',(203.802203,-89.710259,1.585)); +#185740 = LINE('',#185741,#185742); +#185741 = CARTESIAN_POINT('',(203.72,-89.737281,1.585)); +#185742 = VECTOR('',#185743,1.); +#185743 = DIRECTION('',(0.949989096257,0.312283071896,0.)); +#185744 = ORIENTED_EDGE('',*,*,#185745,.T.); +#185745 = EDGE_CURVE('',#185738,#185481,#185746,.T.); +#185746 = LINE('',#185747,#185748); +#185747 = CARTESIAN_POINT('',(203.802203,-89.710259,1.585)); +#185748 = VECTOR('',#185749,1.); +#185749 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#185750 = PLANE('',#185751); +#185751 = AXIS2_PLACEMENT_3D('',#185752,#185753,#185754); +#185752 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185753 = DIRECTION('',(0.,0.,1.)); +#185754 = DIRECTION('',(1.,0.,-0.)); +#185755 = SHELL_BASED_SURFACE_MODEL('',(#185756)); +#185756 = OPEN_SHELL('',(#185757)); +#185757 = ADVANCED_FACE('',(#185758),#185893,.T.); +#185758 = FACE_BOUND('',#185759,.F.); +#185759 = EDGE_LOOP('',(#185760,#185771,#185779,#185787,#185795,#185804, + #185812,#185820,#185829,#185837,#185845,#185854,#185862,#185870, + #185879,#185887)); +#185760 = ORIENTED_EDGE('',*,*,#185761,.T.); +#185761 = EDGE_CURVE('',#185762,#185764,#185766,.T.); +#185762 = VERTEX_POINT('',#185763); +#185763 = CARTESIAN_POINT('',(202.806398,-89.647951,1.585)); +#185764 = VERTEX_POINT('',#185765); +#185765 = CARTESIAN_POINT('',(202.923532,-89.730918,1.585)); +#185766 = CIRCLE('',#185767,7.499955990671E-02); +#185767 = AXIS2_PLACEMENT_3D('',#185768,#185769,#185770); +#185768 = CARTESIAN_POINT('',(202.85238150095,-89.70720006435,1.585)); +#185769 = DIRECTION('',(0.,0.,-1.)); +#185770 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#185771 = ORIENTED_EDGE('',*,*,#185772,.T.); +#185772 = EDGE_CURVE('',#185764,#185773,#185775,.T.); +#185773 = VERTEX_POINT('',#185774); +#185774 = CARTESIAN_POINT('',(202.718343,-90.346485,1.585)); +#185775 = LINE('',#185776,#185777); +#185776 = CARTESIAN_POINT('',(202.923532,-89.730918,1.585)); +#185777 = VECTOR('',#185778,1.); +#185778 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#185779 = ORIENTED_EDGE('',*,*,#185780,.T.); +#185780 = EDGE_CURVE('',#185773,#185781,#185783,.T.); +#185781 = VERTEX_POINT('',#185782); +#185782 = CARTESIAN_POINT('',(203.015476,-90.346485,1.585)); +#185783 = LINE('',#185784,#185785); +#185784 = CARTESIAN_POINT('',(202.718343,-90.346485,1.585)); +#185785 = VECTOR('',#185786,1.); +#185786 = DIRECTION('',(1.,0.,0.)); +#185787 = ORIENTED_EDGE('',*,*,#185788,.T.); +#185788 = EDGE_CURVE('',#185781,#185789,#185791,.T.); +#185789 = VERTEX_POINT('',#185790); +#185790 = CARTESIAN_POINT('',(203.016917,-90.07352,1.585)); +#185791 = LINE('',#185792,#185793); +#185792 = CARTESIAN_POINT('',(203.015476,-90.346485,1.585)); +#185793 = VECTOR('',#185794,1.); +#185794 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#185795 = ORIENTED_EDGE('',*,*,#185796,.T.); +#185796 = EDGE_CURVE('',#185789,#185797,#185799,.T.); +#185797 = VERTEX_POINT('',#185798); +#185798 = CARTESIAN_POINT('',(203.165476,-90.088152,1.585)); +#185799 = CIRCLE('',#185800,7.500006711464E-02); +#185800 = AXIS2_PLACEMENT_3D('',#185801,#185802,#185803); +#185801 = CARTESIAN_POINT('',(203.09047593288,-90.08815193288,1.585)); +#185802 = DIRECTION('',(0.,0.,-1.)); +#185803 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#185804 = ORIENTED_EDGE('',*,*,#185805,.T.); +#185805 = EDGE_CURVE('',#185797,#185806,#185808,.T.); +#185806 = VERTEX_POINT('',#185807); +#185807 = CARTESIAN_POINT('',(203.165476,-90.346485,1.585)); +#185808 = LINE('',#185809,#185810); +#185809 = CARTESIAN_POINT('',(203.165476,-90.088152,1.585)); +#185810 = VECTOR('',#185811,1.); +#185811 = DIRECTION('',(0.,-1.,0.)); +#185812 = ORIENTED_EDGE('',*,*,#185813,.T.); +#185813 = EDGE_CURVE('',#185806,#185814,#185816,.T.); +#185814 = VERTEX_POINT('',#185815); +#185815 = CARTESIAN_POINT('',(203.247965,-90.347926,1.585)); +#185816 = LINE('',#185817,#185818); +#185817 = CARTESIAN_POINT('',(203.165476,-90.346485,1.585)); +#185818 = VECTOR('',#185819,1.); +#185819 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#185820 = ORIENTED_EDGE('',*,*,#185821,.T.); +#185821 = EDGE_CURVE('',#185814,#185822,#185824,.T.); +#185822 = VERTEX_POINT('',#185823); +#185823 = CARTESIAN_POINT('',(203.233333,-90.496485,1.585)); +#185824 = CIRCLE('',#185825,7.500006711465E-02); +#185825 = AXIS2_PLACEMENT_3D('',#185826,#185827,#185828); +#185826 = CARTESIAN_POINT('',(203.23333306711,-90.42148493288,1.585)); +#185827 = DIRECTION('',(0.,0.,-1.)); +#185828 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#185829 = ORIENTED_EDGE('',*,*,#185830,.T.); +#185830 = EDGE_CURVE('',#185822,#185831,#185833,.T.); +#185831 = VERTEX_POINT('',#185832); +#185832 = CARTESIAN_POINT('',(203.165476,-90.496485,1.585)); +#185833 = LINE('',#185834,#185835); +#185834 = CARTESIAN_POINT('',(203.233333,-90.496485,1.585)); +#185835 = VECTOR('',#185836,1.); +#185836 = DIRECTION('',(-1.,0.,0.)); +#185837 = ORIENTED_EDGE('',*,*,#185838,.T.); +#185838 = EDGE_CURVE('',#185831,#185839,#185841,.T.); +#185839 = VERTEX_POINT('',#185840); +#185840 = CARTESIAN_POINT('',(203.164035,-90.769451,1.585)); +#185841 = LINE('',#185842,#185843); +#185842 = CARTESIAN_POINT('',(203.165476,-90.496485,1.585)); +#185843 = VECTOR('',#185844,1.); +#185844 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#185845 = ORIENTED_EDGE('',*,*,#185846,.T.); +#185846 = EDGE_CURVE('',#185839,#185847,#185849,.T.); +#185847 = VERTEX_POINT('',#185848); +#185848 = CARTESIAN_POINT('',(203.015476,-90.754819,1.585)); +#185849 = CIRCLE('',#185850,7.500006711464E-02); +#185850 = AXIS2_PLACEMENT_3D('',#185851,#185852,#185853); +#185851 = CARTESIAN_POINT('',(203.09047606711,-90.75481906711,1.585)); +#185852 = DIRECTION('',(-0.,0.,-1.)); +#185853 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#185854 = ORIENTED_EDGE('',*,*,#185855,.T.); +#185855 = EDGE_CURVE('',#185847,#185856,#185858,.T.); +#185856 = VERTEX_POINT('',#185857); +#185857 = CARTESIAN_POINT('',(203.015476,-90.496485,1.585)); +#185858 = LINE('',#185859,#185860); +#185859 = CARTESIAN_POINT('',(203.015476,-90.754819,1.585)); +#185860 = VECTOR('',#185861,1.); +#185861 = DIRECTION('',(0.,1.,0.)); +#185862 = ORIENTED_EDGE('',*,*,#185863,.T.); +#185863 = EDGE_CURVE('',#185856,#185864,#185866,.T.); +#185864 = VERTEX_POINT('',#185865); +#185865 = CARTESIAN_POINT('',(202.599654,-90.495044,1.585)); +#185866 = LINE('',#185867,#185868); +#185867 = CARTESIAN_POINT('',(203.015476,-90.496485,1.585)); +#185868 = VECTOR('',#185869,1.); +#185869 = DIRECTION('',(-0.999993995468,3.465404301562E-03,0.)); +#185870 = ORIENTED_EDGE('',*,*,#185871,.T.); +#185871 = EDGE_CURVE('',#185864,#185872,#185874,.T.); +#185872 = VERTEX_POINT('',#185873); +#185873 = CARTESIAN_POINT('',(202.543135,-90.397768,1.585)); +#185874 = CIRCLE('',#185875,7.499997045034E-02); +#185875 = AXIS2_PLACEMENT_3D('',#185876,#185877,#185878); +#185876 = CARTESIAN_POINT('',(202.61428617257,-90.42148521335,1.585)); +#185877 = DIRECTION('',(0.,0.,-1.)); +#185878 = DIRECTION('',(-0.195095711167,-0.980784208419,-0.)); +#185879 = ORIENTED_EDGE('',*,*,#185880,.T.); +#185880 = EDGE_CURVE('',#185872,#185881,#185883,.T.); +#185881 = VERTEX_POINT('',#185882); +#185882 = CARTESIAN_POINT('',(202.787224,-89.670058,1.585)); +#185883 = LINE('',#185884,#185885); +#185884 = CARTESIAN_POINT('',(202.543135,-90.397768,1.585)); +#185885 = VECTOR('',#185886,1.); +#185886 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#185887 = ORIENTED_EDGE('',*,*,#185888,.T.); +#185888 = EDGE_CURVE('',#185881,#185762,#185889,.T.); +#185889 = LINE('',#185890,#185891); +#185890 = CARTESIAN_POINT('',(202.787224,-89.670058,1.585)); +#185891 = VECTOR('',#185892,1.); +#185892 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#185893 = PLANE('',#185894); +#185894 = AXIS2_PLACEMENT_3D('',#185895,#185896,#185897); +#185895 = CARTESIAN_POINT('',(0.,0.,1.585)); +#185896 = DIRECTION('',(0.,0.,1.)); +#185897 = DIRECTION('',(1.,0.,-0.)); +#185898 = SHELL_BASED_SURFACE_MODEL('',(#185899)); +#185899 = OPEN_SHELL('',(#185900)); +#185900 = ADVANCED_FACE('',(#185901,#186012),#186064,.T.); +#185901 = FACE_BOUND('',#185902,.F.); +#185902 = EDGE_LOOP('',(#185903,#185914,#185922,#185931,#185939,#185948, + #185956,#185964,#185973,#185981,#185989,#185997,#186006)); +#185903 = ORIENTED_EDGE('',*,*,#185904,.T.); +#185904 = EDGE_CURVE('',#185905,#185907,#185909,.T.); +#185905 = VERTEX_POINT('',#185906); +#185906 = CARTESIAN_POINT('',(133.578805,-89.333287,1.585)); +#185907 = VERTEX_POINT('',#185908); +#185908 = CARTESIAN_POINT('',(133.652364,-89.272919,1.585)); +#185909 = CIRCLE('',#185910,7.500074938989E-02); +#185910 = AXIS2_PLACEMENT_3D('',#185911,#185912,#185913); +#185911 = CARTESIAN_POINT('',(133.65236446611,-89.34791974938,1.585)); +#185912 = DIRECTION('',(0.,0.,-1.)); +#185913 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#185914 = ORIENTED_EDGE('',*,*,#185915,.T.); +#185915 = EDGE_CURVE('',#185907,#185916,#185918,.T.); +#185916 = VERTEX_POINT('',#185917); +#185917 = CARTESIAN_POINT('',(134.047948,-89.27436,1.585)); +#185918 = LINE('',#185919,#185920); +#185919 = CARTESIAN_POINT('',(133.652364,-89.272919,1.585)); +#185920 = VECTOR('',#185921,1.); +#185921 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#185922 = ORIENTED_EDGE('',*,*,#185923,.T.); +#185923 = EDGE_CURVE('',#185916,#185924,#185926,.T.); +#185924 = VERTEX_POINT('',#185925); +#185925 = CARTESIAN_POINT('',(134.297351,-89.523763,1.585)); +#185926 = CIRCLE('',#185927,0.347870264855); +#185927 = AXIS2_PLACEMENT_3D('',#185928,#185929,#185930); +#185928 = CARTESIAN_POINT('',(133.96062026502,-89.61109073497,1.585)); +#185929 = DIRECTION('',(0.,0.,-1.)); +#185930 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#185931 = ORIENTED_EDGE('',*,*,#185932,.T.); +#185932 = EDGE_CURVE('',#185924,#185933,#185935,.T.); +#185933 = VERTEX_POINT('',#185934); +#185934 = CARTESIAN_POINT('',(134.296129,-89.701062,1.585)); +#185935 = LINE('',#185936,#185937); +#185936 = CARTESIAN_POINT('',(134.297351,-89.523763,1.585)); +#185937 = VECTOR('',#185938,1.); +#185938 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#185939 = ORIENTED_EDGE('',*,*,#185940,.T.); +#185940 = EDGE_CURVE('',#185933,#185941,#185943,.T.); +#185941 = VERTEX_POINT('',#185942); +#185942 = CARTESIAN_POINT('',(134.047948,-89.945287,1.585)); +#185943 = CIRCLE('',#185944,0.348632345848); +#185944 = AXIS2_PLACEMENT_3D('',#185945,#185946,#185947); +#185945 = CARTESIAN_POINT('',(133.96017919403,-89.6078834593,1.585)); +#185946 = DIRECTION('',(0.,0.,-1.)); +#185947 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#185948 = ORIENTED_EDGE('',*,*,#185949,.T.); +#185949 = EDGE_CURVE('',#185941,#185950,#185952,.T.); +#185950 = VERTEX_POINT('',#185951); +#185951 = CARTESIAN_POINT('',(134.034431,-89.946618,1.585)); +#185952 = LINE('',#185953,#185954); +#185953 = CARTESIAN_POINT('',(134.047948,-89.945287,1.585)); +#185954 = VECTOR('',#185955,1.); +#185955 = DIRECTION('',(-0.995186940545,-9.799465990048E-02,0.)); +#185956 = ORIENTED_EDGE('',*,*,#185957,.T.); +#185957 = EDGE_CURVE('',#185950,#185958,#185960,.T.); +#185958 = VERTEX_POINT('',#185959); +#185959 = CARTESIAN_POINT('',(134.292445,-90.317723,1.585)); +#185960 = LINE('',#185961,#185962); +#185961 = CARTESIAN_POINT('',(134.034431,-89.946618,1.585)); +#185962 = VECTOR('',#185963,1.); +#185963 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#185964 = ORIENTED_EDGE('',*,*,#185965,.T.); +#185965 = EDGE_CURVE('',#185958,#185966,#185968,.T.); +#185966 = VERTEX_POINT('',#185967); +#185967 = CARTESIAN_POINT('',(134.16235,-90.390929,1.585)); +#185968 = CIRCLE('',#185969,7.500005951702E-02); +#185969 = AXIS2_PLACEMENT_3D('',#185970,#185971,#185972); +#185970 = CARTESIAN_POINT('',(134.22379206294,-90.34791874739,1.585)); +#185971 = DIRECTION('',(0.,0.,-1.)); +#185972 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#185973 = ORIENTED_EDGE('',*,*,#185974,.T.); +#185974 = EDGE_CURVE('',#185966,#185975,#185977,.T.); +#185975 = VERTEX_POINT('',#185976); +#185976 = CARTESIAN_POINT('',(133.85141,-89.946728,1.585)); +#185977 = LINE('',#185978,#185979); +#185978 = CARTESIAN_POINT('',(134.16235,-90.390929,1.585)); +#185979 = VECTOR('',#185980,1.); +#185980 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#185981 = ORIENTED_EDGE('',*,*,#185982,.T.); +#185982 = EDGE_CURVE('',#185975,#185983,#185985,.T.); +#185983 = VERTEX_POINT('',#185984); +#185984 = CARTESIAN_POINT('',(133.727364,-89.946728,1.585)); +#185985 = LINE('',#185986,#185987); +#185986 = CARTESIAN_POINT('',(133.85141,-89.946728,1.585)); +#185987 = VECTOR('',#185988,1.); +#185988 = DIRECTION('',(-1.,0.,0.)); +#185989 = ORIENTED_EDGE('',*,*,#185990,.T.); +#185990 = EDGE_CURVE('',#185983,#185991,#185993,.T.); +#185991 = VERTEX_POINT('',#185992); +#185992 = CARTESIAN_POINT('',(133.725923,-90.362551,1.585)); +#185993 = LINE('',#185994,#185995); +#185994 = CARTESIAN_POINT('',(133.727364,-89.946728,1.585)); +#185995 = VECTOR('',#185996,1.); +#185996 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#185997 = ORIENTED_EDGE('',*,*,#185998,.T.); +#185998 = EDGE_CURVE('',#185991,#185999,#186001,.T.); +#185999 = VERTEX_POINT('',#186000); +#186000 = CARTESIAN_POINT('',(133.577364,-90.347919,1.585)); +#186001 = CIRCLE('',#186002,7.500006711464E-02); +#186002 = AXIS2_PLACEMENT_3D('',#186003,#186004,#186005); +#186003 = CARTESIAN_POINT('',(133.65236406711,-90.34791906711,1.585)); +#186004 = DIRECTION('',(-0.,0.,-1.)); +#186005 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#186006 = ORIENTED_EDGE('',*,*,#186007,.T.); +#186007 = EDGE_CURVE('',#185999,#185905,#186008,.T.); +#186008 = LINE('',#186009,#186010); +#186009 = CARTESIAN_POINT('',(133.577364,-90.347919,1.585)); +#186010 = VECTOR('',#186011,1.); +#186011 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#186012 = FACE_BOUND('',#186013,.F.); +#186013 = EDGE_LOOP('',(#186014,#186025,#186033,#186041,#186049,#186058) + ); +#186014 = ORIENTED_EDGE('',*,*,#186015,.T.); +#186015 = EDGE_CURVE('',#186016,#186018,#186020,.T.); +#186016 = VERTEX_POINT('',#186017); +#186017 = CARTESIAN_POINT('',(134.148792,-89.5561,1.585)); +#186018 = VERTEX_POINT('',#186019); +#186019 = CARTESIAN_POINT('',(134.015611,-89.422919,1.585)); +#186020 = CIRCLE('',#186021,0.18686440374); +#186021 = AXIS2_PLACEMENT_3D('',#186022,#186023,#186024); +#186022 = CARTESIAN_POINT('',(133.968075,-89.603636,1.585)); +#186023 = DIRECTION('',(0.,0.,1.)); +#186024 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#186025 = ORIENTED_EDGE('',*,*,#186026,.T.); +#186026 = EDGE_CURVE('',#186018,#186027,#186029,.T.); +#186027 = VERTEX_POINT('',#186028); +#186028 = CARTESIAN_POINT('',(133.727364,-89.422919,1.585)); +#186029 = LINE('',#186030,#186031); +#186030 = CARTESIAN_POINT('',(134.015611,-89.422919,1.585)); +#186031 = VECTOR('',#186032,1.); +#186032 = DIRECTION('',(-1.,0.,0.)); +#186033 = ORIENTED_EDGE('',*,*,#186034,.T.); +#186034 = EDGE_CURVE('',#186027,#186035,#186037,.T.); +#186035 = VERTEX_POINT('',#186036); +#186036 = CARTESIAN_POINT('',(133.727364,-89.796728,1.585)); +#186037 = LINE('',#186038,#186039); +#186038 = CARTESIAN_POINT('',(133.727364,-89.422919,1.585)); +#186039 = VECTOR('',#186040,1.); +#186040 = DIRECTION('',(0.,-1.,0.)); +#186041 = ORIENTED_EDGE('',*,*,#186042,.T.); +#186042 = EDGE_CURVE('',#186035,#186043,#186045,.T.); +#186043 = VERTEX_POINT('',#186044); +#186044 = CARTESIAN_POINT('',(134.015611,-89.796728,1.585)); +#186045 = LINE('',#186046,#186047); +#186046 = CARTESIAN_POINT('',(133.727364,-89.796728,1.585)); +#186047 = VECTOR('',#186048,1.); +#186048 = DIRECTION('',(1.,0.,0.)); +#186049 = ORIENTED_EDGE('',*,*,#186050,.T.); +#186050 = EDGE_CURVE('',#186043,#186051,#186053,.T.); +#186051 = VERTEX_POINT('',#186052); +#186052 = CARTESIAN_POINT('',(134.148792,-89.663547,1.585)); +#186053 = CIRCLE('',#186054,0.18686440374); +#186054 = AXIS2_PLACEMENT_3D('',#186055,#186056,#186057); +#186055 = CARTESIAN_POINT('',(133.968075,-89.616011,1.585)); +#186056 = DIRECTION('',(0.,0.,1.)); +#186057 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#186058 = ORIENTED_EDGE('',*,*,#186059,.T.); +#186059 = EDGE_CURVE('',#186051,#186016,#186060,.T.); +#186060 = LINE('',#186061,#186062); +#186061 = CARTESIAN_POINT('',(134.148792,-89.663547,1.585)); +#186062 = VECTOR('',#186063,1.); +#186063 = DIRECTION('',(0.,1.,0.)); +#186064 = PLANE('',#186065); +#186065 = AXIS2_PLACEMENT_3D('',#186066,#186067,#186068); +#186066 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186067 = DIRECTION('',(0.,0.,1.)); +#186068 = DIRECTION('',(1.,0.,-0.)); +#186069 = SHELL_BASED_SURFACE_MODEL('',(#186070)); +#186070 = OPEN_SHELL('',(#186071)); +#186071 = ADVANCED_FACE('',(#186072),#186267,.T.); +#186072 = FACE_BOUND('',#186073,.F.); +#186073 = EDGE_LOOP('',(#186074,#186085,#186093,#186102,#186110,#186118, + #186126,#186134,#186143,#186151,#186160,#186168,#186176,#186184, + #186193,#186201,#186210,#186218,#186227,#186235,#186244,#186252, + #186261)); +#186074 = ORIENTED_EDGE('',*,*,#186075,.T.); +#186075 = EDGE_CURVE('',#186076,#186078,#186080,.T.); +#186076 = VERTEX_POINT('',#186077); +#186077 = CARTESIAN_POINT('',(134.580626,-89.32604,1.585)); +#186078 = VERTEX_POINT('',#186079); +#186079 = CARTESIAN_POINT('',(134.652364,-89.272919,1.585)); +#186080 = CIRCLE('',#186081,7.50033610077E-02); +#186081 = AXIS2_PLACEMENT_3D('',#186082,#186083,#186084); +#186082 = CARTESIAN_POINT('',(134.6523662707,-89.34792236097,1.585)); +#186083 = DIRECTION('',(0.,0.,-1.)); +#186084 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#186085 = ORIENTED_EDGE('',*,*,#186086,.T.); +#186086 = EDGE_CURVE('',#186078,#186087,#186089,.T.); +#186087 = VERTEX_POINT('',#186088); +#186088 = CARTESIAN_POINT('',(135.143186,-89.27436,1.585)); +#186089 = LINE('',#186090,#186091); +#186090 = CARTESIAN_POINT('',(134.652364,-89.272919,1.585)); +#186091 = VECTOR('',#186092,1.); +#186092 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#186093 = ORIENTED_EDGE('',*,*,#186094,.T.); +#186094 = EDGE_CURVE('',#186087,#186095,#186097,.T.); +#186095 = VERTEX_POINT('',#186096); +#186096 = CARTESIAN_POINT('',(135.128554,-89.422919,1.585)); +#186097 = CIRCLE('',#186098,7.500006711463E-02); +#186098 = AXIS2_PLACEMENT_3D('',#186099,#186100,#186101); +#186099 = CARTESIAN_POINT('',(135.12855406711,-89.34791893288,1.585)); +#186100 = DIRECTION('',(0.,0.,-1.)); +#186101 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#186102 = ORIENTED_EDGE('',*,*,#186103,.T.); +#186103 = EDGE_CURVE('',#186095,#186104,#186106,.T.); +#186104 = VERTEX_POINT('',#186105); +#186105 = CARTESIAN_POINT('',(134.720238,-89.422919,1.585)); +#186106 = LINE('',#186107,#186108); +#186107 = CARTESIAN_POINT('',(135.128554,-89.422919,1.585)); +#186108 = VECTOR('',#186109,1.); +#186109 = DIRECTION('',(-1.,0.,0.)); +#186110 = ORIENTED_EDGE('',*,*,#186111,.T.); +#186111 = EDGE_CURVE('',#186104,#186112,#186114,.T.); +#186112 = VERTEX_POINT('',#186113); +#186113 = CARTESIAN_POINT('',(134.695419,-89.671109,1.585)); +#186114 = LINE('',#186115,#186116); +#186115 = CARTESIAN_POINT('',(134.720238,-89.422919,1.585)); +#186116 = VECTOR('',#186117,1.); +#186117 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#186118 = ORIENTED_EDGE('',*,*,#186119,.T.); +#186119 = EDGE_CURVE('',#186112,#186120,#186122,.T.); +#186120 = VERTEX_POINT('',#186121); +#186121 = CARTESIAN_POINT('',(134.73297,-89.655312,1.585)); +#186122 = LINE('',#186123,#186124); +#186123 = CARTESIAN_POINT('',(134.695419,-89.671109,1.585)); +#186124 = VECTOR('',#186125,1.); +#186125 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#186126 = ORIENTED_EDGE('',*,*,#186127,.T.); +#186127 = EDGE_CURVE('',#186120,#186128,#186130,.T.); +#186128 = VERTEX_POINT('',#186129); +#186129 = CARTESIAN_POINT('',(135.005506,-89.656534,1.585)); +#186130 = LINE('',#186131,#186132); +#186131 = CARTESIAN_POINT('',(134.73297,-89.655312,1.585)); +#186132 = VECTOR('',#186133,1.); +#186133 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#186134 = ORIENTED_EDGE('',*,*,#186135,.T.); +#186135 = EDGE_CURVE('',#186128,#186136,#186138,.T.); +#186136 = VERTEX_POINT('',#186137); +#186137 = CARTESIAN_POINT('',(135.249732,-89.904715,1.585)); +#186138 = CIRCLE('',#186139,0.348625649748); +#186139 = AXIS2_PLACEMENT_3D('',#186140,#186141,#186142); +#186140 = CARTESIAN_POINT('',(134.91233404586,-89.99247868387,1.585)); +#186141 = DIRECTION('',(0.,0.,-1.)); +#186142 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#186143 = ORIENTED_EDGE('',*,*,#186144,.T.); +#186144 = EDGE_CURVE('',#186136,#186145,#186147,.T.); +#186145 = VERTEX_POINT('',#186146); +#186146 = CARTESIAN_POINT('',(135.24851,-90.177252,1.585)); +#186147 = LINE('',#186148,#186149); +#186148 = CARTESIAN_POINT('',(135.249732,-89.904715,1.585)); +#186149 = VECTOR('',#186150,1.); +#186150 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#186151 = ORIENTED_EDGE('',*,*,#186152,.T.); +#186152 = EDGE_CURVE('',#186145,#186153,#186155,.T.); +#186153 = VERTEX_POINT('',#186154); +#186154 = CARTESIAN_POINT('',(135.000329,-90.421478,1.585)); +#186155 = CIRCLE('',#186156,0.348635327447); +#186156 = AXIS2_PLACEMENT_3D('',#186157,#186158,#186159); +#186157 = CARTESIAN_POINT('',(134.91255748129,-90.08407208415,1.585)); +#186158 = DIRECTION('',(0.,0.,-1.)); +#186159 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#186160 = ORIENTED_EDGE('',*,*,#186161,.T.); +#186161 = EDGE_CURVE('',#186153,#186162,#186164,.T.); +#186162 = VERTEX_POINT('',#186163); +#186163 = CARTESIAN_POINT('',(134.727792,-90.420256,1.585)); +#186164 = LINE('',#186165,#186166); +#186165 = CARTESIAN_POINT('',(135.000329,-90.421478,1.585)); +#186166 = VECTOR('',#186167,1.); +#186167 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#186168 = ORIENTED_EDGE('',*,*,#186169,.T.); +#186169 = EDGE_CURVE('',#186162,#186170,#186172,.T.); +#186170 = VERTEX_POINT('',#186171); +#186171 = CARTESIAN_POINT('',(134.605079,-90.35805,1.585)); +#186172 = LINE('',#186173,#186174); +#186173 = CARTESIAN_POINT('',(134.727792,-90.420256,1.585)); +#186174 = VECTOR('',#186175,1.); +#186175 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#186176 = ORIENTED_EDGE('',*,*,#186177,.T.); +#186177 = EDGE_CURVE('',#186170,#186178,#186180,.T.); +#186178 = VERTEX_POINT('',#186179); +#186179 = CARTESIAN_POINT('',(134.542384,-90.294347,1.585)); +#186180 = LINE('',#186181,#186182); +#186181 = CARTESIAN_POINT('',(134.605079,-90.35805,1.585)); +#186182 = VECTOR('',#186183,1.); +#186183 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#186184 = ORIENTED_EDGE('',*,*,#186185,.T.); +#186185 = EDGE_CURVE('',#186178,#186186,#186188,.T.); +#186186 = VERTEX_POINT('',#186187); +#186187 = CARTESIAN_POINT('',(134.657779,-90.199648,1.585)); +#186188 = CIRCLE('',#186189,7.50001266804E-02); +#186189 = AXIS2_PLACEMENT_3D('',#186190,#186191,#186192); +#186190 = CARTESIAN_POINT('',(134.60474505199,-90.25268024831,1.585)); +#186191 = DIRECTION('',(0.,0.,-1.)); +#186192 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#186193 = ORIENTED_EDGE('',*,*,#186194,.T.); +#186194 = EDGE_CURVE('',#186186,#186195,#186197,.T.); +#186195 = VERTEX_POINT('',#186196); +#186196 = CARTESIAN_POINT('',(134.696791,-90.238661,1.585)); +#186197 = LINE('',#186198,#186199); +#186198 = CARTESIAN_POINT('',(134.657779,-90.199648,1.585)); +#186199 = VECTOR('',#186200,1.); +#186200 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#186201 = ORIENTED_EDGE('',*,*,#186202,.T.); +#186202 = EDGE_CURVE('',#186195,#186203,#186205,.T.); +#186203 = VERTEX_POINT('',#186204); +#186204 = CARTESIAN_POINT('',(135.036507,-90.238661,1.585)); +#186205 = CIRCLE('',#186206,0.305620374329); +#186206 = AXIS2_PLACEMENT_3D('',#186207,#186208,#186209); +#186207 = CARTESIAN_POINT('',(134.866649,-89.98459,1.585)); +#186208 = DIRECTION('',(0.,0.,1.)); +#186209 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#186210 = ORIENTED_EDGE('',*,*,#186211,.T.); +#186211 = EDGE_CURVE('',#186203,#186212,#186214,.T.); +#186212 = VERTEX_POINT('',#186213); +#186213 = CARTESIAN_POINT('',(135.066914,-90.208253,1.585)); +#186214 = LINE('',#186215,#186216); +#186215 = CARTESIAN_POINT('',(135.036507,-90.238661,1.585)); +#186216 = VECTOR('',#186217,1.); +#186217 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#186218 = ORIENTED_EDGE('',*,*,#186219,.T.); +#186219 = EDGE_CURVE('',#186212,#186220,#186222,.T.); +#186220 = VERTEX_POINT('',#186221); +#186221 = CARTESIAN_POINT('',(135.066915,-89.868536,1.585)); +#186222 = CIRCLE('',#186223,0.305616146029); +#186223 = AXIS2_PLACEMENT_3D('',#186224,#186225,#186226); +#186224 = CARTESIAN_POINT('',(134.81284892049,-90.03839375212,1.585)); +#186225 = DIRECTION('',(0.,-0.,1.)); +#186226 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#186227 = ORIENTED_EDGE('',*,*,#186228,.T.); +#186228 = EDGE_CURVE('',#186220,#186229,#186231,.T.); +#186229 = VERTEX_POINT('',#186230); +#186230 = CARTESIAN_POINT('',(135.036508,-89.838129,1.585)); +#186231 = LINE('',#186232,#186233); +#186232 = CARTESIAN_POINT('',(135.066915,-89.868536,1.585)); +#186233 = VECTOR('',#186234,1.); +#186234 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#186235 = ORIENTED_EDGE('',*,*,#186236,.T.); +#186236 = EDGE_CURVE('',#186229,#186237,#186239,.T.); +#186237 = VERTEX_POINT('',#186238); +#186238 = CARTESIAN_POINT('',(134.696791,-89.838129,1.585)); +#186239 = CIRCLE('',#186240,0.305621483548); +#186240 = AXIS2_PLACEMENT_3D('',#186241,#186242,#186243); +#186241 = CARTESIAN_POINT('',(134.8666495,-90.092201,1.585)); +#186242 = DIRECTION('',(0.,0.,1.)); +#186243 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#186244 = ORIENTED_EDGE('',*,*,#186245,.T.); +#186245 = EDGE_CURVE('',#186237,#186246,#186248,.T.); +#186246 = VERTEX_POINT('',#186247); +#186247 = CARTESIAN_POINT('',(134.640001,-89.890306,1.585)); +#186248 = LINE('',#186249,#186250); +#186249 = CARTESIAN_POINT('',(134.696791,-89.838129,1.585)); +#186250 = VECTOR('',#186251,1.); +#186251 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#186252 = ORIENTED_EDGE('',*,*,#186253,.T.); +#186253 = EDGE_CURVE('',#186246,#186254,#186256,.T.); +#186254 = VERTEX_POINT('',#186255); +#186255 = CARTESIAN_POINT('',(134.530095,-89.831349,1.585)); +#186256 = CIRCLE('',#186257,7.500024172472E-02); +#186257 = AXIS2_PLACEMENT_3D('',#186258,#186259,#186260); +#186258 = CARTESIAN_POINT('',(134.60474497002,-89.82410895619,1.585)); +#186259 = DIRECTION('',(-0.,0.,-1.)); +#186260 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#186261 = ORIENTED_EDGE('',*,*,#186262,.T.); +#186262 = EDGE_CURVE('',#186254,#186076,#186263,.T.); +#186263 = LINE('',#186264,#186265); +#186264 = CARTESIAN_POINT('',(134.530095,-89.831349,1.585)); +#186265 = VECTOR('',#186266,1.); +#186266 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#186267 = PLANE('',#186268); +#186268 = AXIS2_PLACEMENT_3D('',#186269,#186270,#186271); +#186269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186270 = DIRECTION('',(0.,0.,1.)); +#186271 = DIRECTION('',(1.,0.,-0.)); +#186272 = SHELL_BASED_SURFACE_MODEL('',(#186273)); +#186273 = OPEN_SHELL('',(#186274)); +#186274 = ADVANCED_FACE('',(#186275),#186461,.T.); +#186275 = FACE_BOUND('',#186276,.F.); +#186276 = EDGE_LOOP('',(#186277,#186288,#186296,#186305,#186313,#186321, + #186330,#186338,#186347,#186355,#186363,#186371,#186380,#186388, + #186397,#186405,#186414,#186422,#186430,#186438,#186447,#186455)); +#186277 = ORIENTED_EDGE('',*,*,#186278,.T.); +#186278 = EDGE_CURVE('',#186279,#186281,#186283,.T.); +#186279 = VERTEX_POINT('',#186280); +#186280 = CARTESIAN_POINT('',(135.494875,-89.421478,1.585)); +#186281 = VERTEX_POINT('',#186282); +#186282 = CARTESIAN_POINT('',(135.509507,-89.272919,1.585)); +#186283 = CIRCLE('',#186284,7.500006711463E-02); +#186284 = AXIS2_PLACEMENT_3D('',#186285,#186286,#186287); +#186285 = CARTESIAN_POINT('',(135.50950693288,-89.34791906711,1.585)); +#186286 = DIRECTION('',(0.,0.,-1.)); +#186287 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#186288 = ORIENTED_EDGE('',*,*,#186289,.T.); +#186289 = EDGE_CURVE('',#186281,#186290,#186292,.T.); +#186290 = VERTEX_POINT('',#186291); +#186291 = CARTESIAN_POINT('',(136.136292,-89.273681,1.585)); +#186292 = LINE('',#186293,#186294); +#186293 = CARTESIAN_POINT('',(135.509507,-89.272919,1.585)); +#186294 = VECTOR('',#186295,1.); +#186295 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#186296 = ORIENTED_EDGE('',*,*,#186297,.T.); +#186297 = EDGE_CURVE('',#186290,#186298,#186300,.T.); +#186298 = VERTEX_POINT('',#186299); +#186299 = CARTESIAN_POINT('',(136.202113,-89.362551,1.585)); +#186300 = CIRCLE('',#186301,7.447391611626E-02); +#186301 = AXIS2_PLACEMENT_3D('',#186302,#186303,#186304); +#186302 = CARTESIAN_POINT('',(136.12911292664,-89.3478080874,1.585)); +#186303 = DIRECTION('',(0.,0.,-1.)); +#186304 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#186305 = ORIENTED_EDGE('',*,*,#186306,.T.); +#186306 = EDGE_CURVE('',#186298,#186307,#186309,.T.); +#186307 = VERTEX_POINT('',#186308); +#186308 = CARTESIAN_POINT('',(136.184997,-89.397307,1.585)); +#186309 = LINE('',#186310,#186311); +#186310 = CARTESIAN_POINT('',(136.202113,-89.362551,1.585)); +#186311 = VECTOR('',#186312,1.); +#186312 = DIRECTION('',(-0.441795255026,-0.897115908139,0.)); +#186313 = ORIENTED_EDGE('',*,*,#186314,.T.); +#186314 = EDGE_CURVE('',#186307,#186315,#186317,.T.); +#186315 = VERTEX_POINT('',#186316); +#186316 = CARTESIAN_POINT('',(135.958101,-89.656616,1.585)); +#186317 = LINE('',#186318,#186319); +#186318 = CARTESIAN_POINT('',(136.184997,-89.397307,1.585)); +#186319 = VECTOR('',#186320,1.); +#186320 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#186321 = ORIENTED_EDGE('',*,*,#186322,.T.); +#186322 = EDGE_CURVE('',#186315,#186323,#186325,.T.); +#186323 = VERTEX_POINT('',#186324); +#186324 = CARTESIAN_POINT('',(136.202113,-89.904715,1.585)); +#186325 = CIRCLE('',#186326,0.348520834816); +#186326 = AXIS2_PLACEMENT_3D('',#186327,#186328,#186329); +#186327 = CARTESIAN_POINT('',(135.8648076174,-89.99241819931,1.585)); +#186328 = DIRECTION('',(0.,0.,-1.)); +#186329 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#186330 = ORIENTED_EDGE('',*,*,#186331,.T.); +#186331 = EDGE_CURVE('',#186323,#186332,#186334,.T.); +#186332 = VERTEX_POINT('',#186333); +#186333 = CARTESIAN_POINT('',(136.200891,-90.177252,1.585)); +#186334 = LINE('',#186335,#186336); +#186335 = CARTESIAN_POINT('',(136.202113,-89.904715,1.585)); +#186336 = VECTOR('',#186337,1.); +#186337 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#186338 = ORIENTED_EDGE('',*,*,#186339,.T.); +#186339 = EDGE_CURVE('',#186332,#186340,#186342,.T.); +#186340 = VERTEX_POINT('',#186341); +#186341 = CARTESIAN_POINT('',(135.95271,-90.421478,1.585)); +#186342 = CIRCLE('',#186343,0.348635327447); +#186343 = AXIS2_PLACEMENT_3D('',#186344,#186345,#186346); +#186344 = CARTESIAN_POINT('',(135.86493848129,-90.08407208415,1.585)); +#186345 = DIRECTION('',(0.,0.,-1.)); +#186346 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#186347 = ORIENTED_EDGE('',*,*,#186348,.T.); +#186348 = EDGE_CURVE('',#186340,#186349,#186351,.T.); +#186349 = VERTEX_POINT('',#186350); +#186350 = CARTESIAN_POINT('',(135.632554,-90.420256,1.585)); +#186351 = LINE('',#186352,#186353); +#186352 = CARTESIAN_POINT('',(135.95271,-90.421478,1.585)); +#186353 = VECTOR('',#186354,1.); +#186354 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#186355 = ORIENTED_EDGE('',*,*,#186356,.T.); +#186356 = EDGE_CURVE('',#186349,#186357,#186359,.T.); +#186357 = VERTEX_POINT('',#186358); +#186358 = CARTESIAN_POINT('',(135.509841,-90.35805,1.585)); +#186359 = LINE('',#186360,#186361); +#186360 = CARTESIAN_POINT('',(135.632554,-90.420256,1.585)); +#186361 = VECTOR('',#186362,1.); +#186362 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#186363 = ORIENTED_EDGE('',*,*,#186364,.T.); +#186364 = EDGE_CURVE('',#186357,#186365,#186367,.T.); +#186365 = VERTEX_POINT('',#186366); +#186366 = CARTESIAN_POINT('',(135.447146,-90.294347,1.585)); +#186367 = LINE('',#186368,#186369); +#186368 = CARTESIAN_POINT('',(135.509841,-90.35805,1.585)); +#186369 = VECTOR('',#186370,1.); +#186370 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#186371 = ORIENTED_EDGE('',*,*,#186372,.T.); +#186372 = EDGE_CURVE('',#186365,#186373,#186375,.T.); +#186373 = VERTEX_POINT('',#186374); +#186374 = CARTESIAN_POINT('',(135.562541,-90.199648,1.585)); +#186375 = CIRCLE('',#186376,7.50001266804E-02); +#186376 = AXIS2_PLACEMENT_3D('',#186377,#186378,#186379); +#186377 = CARTESIAN_POINT('',(135.50950705199,-90.25268024831,1.585)); +#186378 = DIRECTION('',(0.,0.,-1.)); +#186379 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#186380 = ORIENTED_EDGE('',*,*,#186381,.T.); +#186381 = EDGE_CURVE('',#186373,#186382,#186384,.T.); +#186382 = VERTEX_POINT('',#186383); +#186383 = CARTESIAN_POINT('',(135.601553,-90.238661,1.585)); +#186384 = LINE('',#186385,#186386); +#186385 = CARTESIAN_POINT('',(135.562541,-90.199648,1.585)); +#186386 = VECTOR('',#186387,1.); +#186387 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#186388 = ORIENTED_EDGE('',*,*,#186389,.T.); +#186389 = EDGE_CURVE('',#186382,#186390,#186392,.T.); +#186390 = VERTEX_POINT('',#186391); +#186391 = CARTESIAN_POINT('',(135.988888,-90.238661,1.585)); +#186392 = CIRCLE('',#186393,0.358502380266); +#186393 = AXIS2_PLACEMENT_3D('',#186394,#186395,#186396); +#186394 = CARTESIAN_POINT('',(135.7952205,-89.936971,1.585)); +#186395 = DIRECTION('',(0.,0.,1.)); +#186396 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#186397 = ORIENTED_EDGE('',*,*,#186398,.T.); +#186398 = EDGE_CURVE('',#186390,#186399,#186401,.T.); +#186399 = VERTEX_POINT('',#186400); +#186400 = CARTESIAN_POINT('',(136.019295,-90.208253,1.585)); +#186401 = LINE('',#186402,#186403); +#186402 = CARTESIAN_POINT('',(135.988888,-90.238661,1.585)); +#186403 = VECTOR('',#186404,1.); +#186404 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#186405 = ORIENTED_EDGE('',*,*,#186406,.T.); +#186406 = EDGE_CURVE('',#186399,#186407,#186409,.T.); +#186407 = VERTEX_POINT('',#186408); +#186408 = CARTESIAN_POINT('',(136.019296,-89.868536,1.585)); +#186409 = CIRCLE('',#186410,0.305616146029); +#186410 = AXIS2_PLACEMENT_3D('',#186411,#186412,#186413); +#186411 = CARTESIAN_POINT('',(135.76522992049,-90.03839375212,1.585)); +#186412 = DIRECTION('',(0.,-0.,1.)); +#186413 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#186414 = ORIENTED_EDGE('',*,*,#186415,.T.); +#186415 = EDGE_CURVE('',#186407,#186416,#186418,.T.); +#186416 = VERTEX_POINT('',#186417); +#186417 = CARTESIAN_POINT('',(135.988889,-89.838129,1.585)); +#186418 = LINE('',#186419,#186420); +#186419 = CARTESIAN_POINT('',(136.019296,-89.868536,1.585)); +#186420 = VECTOR('',#186421,1.); +#186421 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#186422 = ORIENTED_EDGE('',*,*,#186423,.T.); +#186423 = EDGE_CURVE('',#186416,#186424,#186426,.T.); +#186424 = VERTEX_POINT('',#186425); +#186425 = CARTESIAN_POINT('',(135.920373,-89.803871,1.585)); +#186426 = LINE('',#186427,#186428); +#186427 = CARTESIAN_POINT('',(135.988889,-89.838129,1.585)); +#186428 = VECTOR('',#186429,1.); +#186429 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#186430 = ORIENTED_EDGE('',*,*,#186431,.T.); +#186431 = EDGE_CURVE('',#186424,#186432,#186434,.T.); +#186432 = VERTEX_POINT('',#186433); +#186433 = CARTESIAN_POINT('',(135.780589,-89.80243,1.585)); +#186434 = LINE('',#186435,#186436); +#186435 = CARTESIAN_POINT('',(135.920373,-89.803871,1.585)); +#186436 = VECTOR('',#186437,1.); +#186437 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#186438 = ORIENTED_EDGE('',*,*,#186439,.T.); +#186439 = EDGE_CURVE('',#186432,#186440,#186442,.T.); +#186440 = VERTEX_POINT('',#186441); +#186441 = CARTESIAN_POINT('',(135.738778,-89.679483,1.585)); +#186442 = CIRCLE('',#186443,7.500015628759E-02); +#186443 = AXIS2_PLACEMENT_3D('',#186444,#186445,#186446); +#186444 = CARTESIAN_POINT('',(135.79522128432,-89.7288710461,1.585)); +#186445 = DIRECTION('',(0.,0.,-1.)); +#186446 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#186447 = ORIENTED_EDGE('',*,*,#186448,.T.); +#186448 = EDGE_CURVE('',#186440,#186449,#186451,.T.); +#186449 = VERTEX_POINT('',#186450); +#186450 = CARTESIAN_POINT('',(135.963272,-89.422919,1.585)); +#186451 = LINE('',#186452,#186453); +#186452 = CARTESIAN_POINT('',(135.738778,-89.679483,1.585)); +#186453 = VECTOR('',#186454,1.); +#186454 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#186455 = ORIENTED_EDGE('',*,*,#186456,.T.); +#186456 = EDGE_CURVE('',#186449,#186279,#186457,.T.); +#186457 = LINE('',#186458,#186459); +#186458 = CARTESIAN_POINT('',(135.963272,-89.422919,1.585)); +#186459 = VECTOR('',#186460,1.); +#186460 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#186461 = PLANE('',#186462); +#186462 = AXIS2_PLACEMENT_3D('',#186463,#186464,#186465); +#186463 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186464 = DIRECTION('',(0.,0.,1.)); +#186465 = DIRECTION('',(1.,0.,-0.)); +#186466 = SHELL_BASED_SURFACE_MODEL('',(#186467)); +#186467 = OPEN_SHELL('',(#186468)); +#186468 = ADVANCED_FACE('',(#186469),#186563,.T.); +#186469 = FACE_BOUND('',#186470,.F.); +#186470 = EDGE_LOOP('',(#186471,#186482,#186490,#186498,#186506,#186515, + #186523,#186532,#186540,#186549,#186557)); +#186471 = ORIENTED_EDGE('',*,*,#186472,.T.); +#186472 = EDGE_CURVE('',#186473,#186475,#186477,.T.); +#186473 = VERTEX_POINT('',#186474); +#186474 = CARTESIAN_POINT('',(110.601217,-89.670139,1.585)); +#186475 = VERTEX_POINT('',#186476); +#186476 = CARTESIAN_POINT('',(110.712083,-89.670139,1.585)); +#186477 = CIRCLE('',#186478,6.000020841631E-02); +#186478 = AXIS2_PLACEMENT_3D('',#186479,#186480,#186481); +#186479 = CARTESIAN_POINT('',(110.65665,-89.6931,1.585)); +#186480 = DIRECTION('',(0.,0.,-1.)); +#186481 = DIRECTION('',(-0.923880124139,0.382682004047,0.)); +#186482 = ORIENTED_EDGE('',*,*,#186483,.T.); +#186483 = EDGE_CURVE('',#186475,#186484,#186486,.T.); +#186484 = VERTEX_POINT('',#186485); +#186485 = CARTESIAN_POINT('',(110.71665,-89.7281,1.585)); +#186486 = LINE('',#186487,#186488); +#186487 = CARTESIAN_POINT('',(110.712083,-89.670139,1.585)); +#186488 = VECTOR('',#186489,1.); +#186489 = DIRECTION('',(7.855089539712E-02,-0.99691010469,0.)); +#186490 = ORIENTED_EDGE('',*,*,#186491,.T.); +#186491 = EDGE_CURVE('',#186484,#186492,#186494,.T.); +#186492 = VERTEX_POINT('',#186493); +#186493 = CARTESIAN_POINT('',(114.71665,-89.7281,1.585)); +#186494 = LINE('',#186495,#186496); +#186495 = CARTESIAN_POINT('',(110.71665,-89.7281,1.585)); +#186496 = VECTOR('',#186497,1.); +#186497 = DIRECTION('',(1.,0.,0.)); +#186498 = ORIENTED_EDGE('',*,*,#186499,.T.); +#186499 = EDGE_CURVE('',#186492,#186500,#186502,.T.); +#186500 = VERTEX_POINT('',#186501); +#186501 = CARTESIAN_POINT('',(114.721217,-89.670139,1.585)); +#186502 = LINE('',#186503,#186504); +#186503 = CARTESIAN_POINT('',(114.71665,-89.7281,1.585)); +#186504 = VECTOR('',#186505,1.); +#186505 = DIRECTION('',(7.855089539712E-02,0.99691010469,0.)); +#186506 = ORIENTED_EDGE('',*,*,#186507,.T.); +#186507 = EDGE_CURVE('',#186500,#186508,#186510,.T.); +#186508 = VERTEX_POINT('',#186509); +#186509 = CARTESIAN_POINT('',(114.83665,-89.6931,1.585)); +#186510 = CIRCLE('',#186511,6.000007318647E-02); +#186511 = AXIS2_PLACEMENT_3D('',#186512,#186513,#186514); +#186512 = CARTESIAN_POINT('',(114.77664992681,-89.69309982331,1.585)); +#186513 = DIRECTION('',(0.,0.,-1.)); +#186514 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#186515 = ORIENTED_EDGE('',*,*,#186516,.T.); +#186516 = EDGE_CURVE('',#186508,#186517,#186519,.T.); +#186517 = VERTEX_POINT('',#186518); +#186518 = CARTESIAN_POINT('',(114.83665,-89.7881,1.585)); +#186519 = LINE('',#186520,#186521); +#186520 = CARTESIAN_POINT('',(114.83665,-89.6931,1.585)); +#186521 = VECTOR('',#186522,1.); +#186522 = DIRECTION('',(0.,-1.,0.)); +#186523 = ORIENTED_EDGE('',*,*,#186524,.T.); +#186524 = EDGE_CURVE('',#186517,#186525,#186527,.T.); +#186525 = VERTEX_POINT('',#186526); +#186526 = CARTESIAN_POINT('',(114.77665,-89.8481,1.585)); +#186527 = CIRCLE('',#186528,5.999932016264E-02); +#186528 = AXIS2_PLACEMENT_3D('',#186529,#186530,#186531); +#186529 = CARTESIAN_POINT('',(114.77665067984,-89.78810067984,1.585)); +#186530 = DIRECTION('',(0.,0.,-1.)); +#186531 = DIRECTION('',(0.999999999936,1.133081517402E-05,0.)); +#186532 = ORIENTED_EDGE('',*,*,#186533,.T.); +#186533 = EDGE_CURVE('',#186525,#186534,#186536,.T.); +#186534 = VERTEX_POINT('',#186535); +#186535 = CARTESIAN_POINT('',(110.65665,-89.8481,1.585)); +#186536 = LINE('',#186537,#186538); +#186537 = CARTESIAN_POINT('',(114.77665,-89.8481,1.585)); +#186538 = VECTOR('',#186539,1.); +#186539 = DIRECTION('',(-1.,0.,0.)); +#186540 = ORIENTED_EDGE('',*,*,#186541,.T.); +#186541 = EDGE_CURVE('',#186534,#186542,#186544,.T.); +#186542 = VERTEX_POINT('',#186543); +#186543 = CARTESIAN_POINT('',(110.59665,-89.7881,1.585)); +#186544 = CIRCLE('',#186545,5.999932016264E-02); +#186545 = AXIS2_PLACEMENT_3D('',#186546,#186547,#186548); +#186546 = CARTESIAN_POINT('',(110.65664932015,-89.78810067984,1.585)); +#186547 = DIRECTION('',(0.,0.,-1.)); +#186548 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#186549 = ORIENTED_EDGE('',*,*,#186550,.T.); +#186550 = EDGE_CURVE('',#186542,#186551,#186553,.T.); +#186551 = VERTEX_POINT('',#186552); +#186552 = CARTESIAN_POINT('',(110.59665,-89.6931,1.585)); +#186553 = LINE('',#186554,#186555); +#186554 = CARTESIAN_POINT('',(110.59665,-89.7881,1.585)); +#186555 = VECTOR('',#186556,1.); +#186556 = DIRECTION('',(0.,1.,0.)); +#186557 = ORIENTED_EDGE('',*,*,#186558,.T.); +#186558 = EDGE_CURVE('',#186551,#186473,#186559,.T.); +#186559 = LINE('',#186560,#186561); +#186560 = CARTESIAN_POINT('',(110.59665,-89.6931,1.585)); +#186561 = VECTOR('',#186562,1.); +#186562 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#186563 = PLANE('',#186564); +#186564 = AXIS2_PLACEMENT_3D('',#186565,#186566,#186567); +#186565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186566 = DIRECTION('',(0.,0.,1.)); +#186567 = DIRECTION('',(1.,0.,-0.)); +#186568 = SHELL_BASED_SURFACE_MODEL('',(#186569)); +#186569 = OPEN_SHELL('',(#186570)); +#186570 = ADVANCED_FACE('',(#186571),#186607,.T.); +#186571 = FACE_BOUND('',#186572,.F.); +#186572 = EDGE_LOOP('',(#186573,#186584,#186592,#186601)); +#186573 = ORIENTED_EDGE('',*,*,#186574,.T.); +#186574 = EDGE_CURVE('',#186575,#186577,#186579,.T.); +#186575 = VERTEX_POINT('',#186576); +#186576 = CARTESIAN_POINT('',(99.464586,-89.2931,1.585)); +#186577 = VERTEX_POINT('',#186578); +#186578 = CARTESIAN_POINT('',(99.464586,-89.1731,1.585)); +#186579 = CIRCLE('',#186580,6.000000000042E-02); +#186580 = AXIS2_PLACEMENT_3D('',#186581,#186582,#186583); +#186581 = CARTESIAN_POINT('',(99.464585774412,-89.2331,1.585)); +#186582 = DIRECTION('',(0.,0.,-1.)); +#186583 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#186584 = ORIENTED_EDGE('',*,*,#186585,.T.); +#186585 = EDGE_CURVE('',#186577,#186586,#186588,.T.); +#186586 = VERTEX_POINT('',#186587); +#186587 = CARTESIAN_POINT('',(100.918714,-89.1731,1.585)); +#186588 = LINE('',#186589,#186590); +#186589 = CARTESIAN_POINT('',(99.464586,-89.1731,1.585)); +#186590 = VECTOR('',#186591,1.); +#186591 = DIRECTION('',(1.,0.,0.)); +#186592 = ORIENTED_EDGE('',*,*,#186593,.T.); +#186593 = EDGE_CURVE('',#186586,#186594,#186596,.T.); +#186594 = VERTEX_POINT('',#186595); +#186595 = CARTESIAN_POINT('',(100.918714,-89.2931,1.585)); +#186596 = CIRCLE('',#186597,6.000000000042E-02); +#186597 = AXIS2_PLACEMENT_3D('',#186598,#186599,#186600); +#186598 = CARTESIAN_POINT('',(100.91871422558,-89.2331,1.585)); +#186599 = DIRECTION('',(0.,0.,-1.)); +#186600 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#186601 = ORIENTED_EDGE('',*,*,#186602,.T.); +#186602 = EDGE_CURVE('',#186594,#186575,#186603,.T.); +#186603 = LINE('',#186604,#186605); +#186604 = CARTESIAN_POINT('',(100.918714,-89.2931,1.585)); +#186605 = VECTOR('',#186606,1.); +#186606 = DIRECTION('',(-1.,0.,0.)); +#186607 = PLANE('',#186608); +#186608 = AXIS2_PLACEMENT_3D('',#186609,#186610,#186611); +#186609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186610 = DIRECTION('',(0.,0.,1.)); +#186611 = DIRECTION('',(1.,0.,-0.)); +#186612 = SHELL_BASED_SURFACE_MODEL('',(#186613)); +#186613 = OPEN_SHELL('',(#186614)); +#186614 = ADVANCED_FACE('',(#186615,#186741,#186808),#186860,.T.); +#186615 = FACE_BOUND('',#186616,.F.); +#186616 = EDGE_LOOP('',(#186617,#186628,#186636,#186644,#186652,#186660, + #186669,#186677,#186685,#186694,#186702,#186710,#186718,#186726, + #186735)); +#186617 = ORIENTED_EDGE('',*,*,#186618,.T.); +#186618 = EDGE_CURVE('',#186619,#186621,#186623,.T.); +#186619 = VERTEX_POINT('',#186620); +#186620 = CARTESIAN_POINT('',(171.242142,-88.309597,1.585)); +#186621 = VERTEX_POINT('',#186622); +#186622 = CARTESIAN_POINT('',(171.307142,-88.244597,1.585)); +#186623 = CIRCLE('',#186624,6.500103935382E-02); +#186624 = AXIS2_PLACEMENT_3D('',#186625,#186626,#186627); +#186625 = CARTESIAN_POINT('',(171.30714303934,-88.30959803934,1.585)); +#186626 = DIRECTION('',(0.,0.,-1.)); +#186627 = DIRECTION('',(-0.999999999872,1.598967539909E-05,0.)); +#186628 = ORIENTED_EDGE('',*,*,#186629,.T.); +#186629 = EDGE_CURVE('',#186621,#186630,#186632,.T.); +#186630 = VERTEX_POINT('',#186631); +#186631 = CARTESIAN_POINT('',(171.610335,-88.245232,1.585)); +#186632 = LINE('',#186633,#186634); +#186633 = CARTESIAN_POINT('',(171.307142,-88.244597,1.585)); +#186634 = VECTOR('',#186635,1.); +#186635 = DIRECTION('',(0.999997806803,-2.094370936408E-03,0.)); +#186636 = ORIENTED_EDGE('',*,*,#186637,.T.); +#186637 = EDGE_CURVE('',#186630,#186638,#186640,.T.); +#186638 = VERTEX_POINT('',#186639); +#186639 = CARTESIAN_POINT('',(171.636211,-88.251459,1.585)); +#186640 = LINE('',#186641,#186642); +#186641 = CARTESIAN_POINT('',(171.610335,-88.245232,1.585)); +#186642 = VECTOR('',#186643,1.); +#186643 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#186644 = ORIENTED_EDGE('',*,*,#186645,.T.); +#186645 = EDGE_CURVE('',#186638,#186646,#186648,.T.); +#186646 = VERTEX_POINT('',#186647); +#186647 = CARTESIAN_POINT('',(171.738819,-88.306492,1.585)); +#186648 = LINE('',#186649,#186650); +#186649 = CARTESIAN_POINT('',(171.636211,-88.251459,1.585)); +#186650 = VECTOR('',#186651,1.); +#186651 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#186652 = ORIENTED_EDGE('',*,*,#186653,.T.); +#186653 = EDGE_CURVE('',#186646,#186654,#186656,.T.); +#186654 = VERTEX_POINT('',#186655); +#186655 = CARTESIAN_POINT('',(171.793852,-88.366242,1.585)); +#186656 = LINE('',#186657,#186658); +#186657 = CARTESIAN_POINT('',(171.738819,-88.306492,1.585)); +#186658 = VECTOR('',#186659,1.); +#186659 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#186660 = ORIENTED_EDGE('',*,*,#186661,.T.); +#186661 = EDGE_CURVE('',#186654,#186662,#186664,.T.); +#186662 = VERTEX_POINT('',#186663); +#186663 = CARTESIAN_POINT('',(171.787465,-88.689751,1.585)); +#186664 = CIRCLE('',#186665,0.260195634991); +#186665 = AXIS2_PLACEMENT_3D('',#186666,#186667,#186668); +#186666 = CARTESIAN_POINT('',(171.5869163306,-88.52397404239,1.585)); +#186667 = DIRECTION('',(0.,0.,-1.)); +#186668 = DIRECTION('',(0.795307997401,0.606205566842,0.)); +#186669 = ORIENTED_EDGE('',*,*,#186670,.T.); +#186670 = EDGE_CURVE('',#186662,#186671,#186673,.T.); +#186671 = VERTEX_POINT('',#186672); +#186672 = CARTESIAN_POINT('',(171.760589,-88.720973,1.585)); +#186673 = LINE('',#186674,#186675); +#186674 = CARTESIAN_POINT('',(171.787465,-88.689751,1.585)); +#186675 = VECTOR('',#186676,1.); +#186676 = DIRECTION('',(-0.652389160842,-0.757884148677,0.)); +#186677 = ORIENTED_EDGE('',*,*,#186678,.T.); +#186678 = EDGE_CURVE('',#186671,#186679,#186681,.T.); +#186679 = VERTEX_POINT('',#186680); +#186680 = CARTESIAN_POINT('',(171.781676,-88.735063,1.585)); +#186681 = LINE('',#186682,#186683); +#186682 = CARTESIAN_POINT('',(171.760589,-88.720973,1.585)); +#186683 = VECTOR('',#186684,1.); +#186684 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#186685 = ORIENTED_EDGE('',*,*,#186686,.T.); +#186686 = EDGE_CURVE('',#186679,#186687,#186689,.T.); +#186687 = VERTEX_POINT('',#186688); +#186688 = CARTESIAN_POINT('',(171.883512,-89.052824,1.585)); +#186689 = CIRCLE('',#186690,0.311668456373); +#186690 = AXIS2_PLACEMENT_3D('',#186691,#186692,#186693); +#186691 = CARTESIAN_POINT('',(171.58190146242,-88.97428540872,1.585)); +#186692 = DIRECTION('',(0.,0.,-1.)); +#186693 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#186694 = ORIENTED_EDGE('',*,*,#186695,.T.); +#186695 = EDGE_CURVE('',#186687,#186696,#186698,.T.); +#186696 = VERTEX_POINT('',#186697); +#186697 = CARTESIAN_POINT('',(171.830321,-89.16118,1.585)); +#186698 = LINE('',#186699,#186700); +#186699 = CARTESIAN_POINT('',(171.883512,-89.052824,1.585)); +#186700 = VECTOR('',#186701,1.); +#186701 = DIRECTION('',(-0.440660203323,-0.897673986037,0.)); +#186702 = ORIENTED_EDGE('',*,*,#186703,.T.); +#186703 = EDGE_CURVE('',#186696,#186704,#186706,.T.); +#186704 = VERTEX_POINT('',#186705); +#186705 = CARTESIAN_POINT('',(171.773021,-89.218484,1.585)); +#186706 = LINE('',#186707,#186708); +#186707 = CARTESIAN_POINT('',(171.830321,-89.16118,1.585)); +#186708 = VECTOR('',#186709,1.); +#186709 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#186710 = ORIENTED_EDGE('',*,*,#186711,.T.); +#186711 = EDGE_CURVE('',#186704,#186712,#186714,.T.); +#186712 = VERTEX_POINT('',#186713); +#186713 = CARTESIAN_POINT('',(171.664655,-89.271681,1.585)); +#186714 = LINE('',#186715,#186716); +#186715 = CARTESIAN_POINT('',(171.773021,-89.218484,1.585)); +#186716 = VECTOR('',#186717,1.); +#186717 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#186718 = ORIENTED_EDGE('',*,*,#186719,.T.); +#186719 = EDGE_CURVE('',#186712,#186720,#186722,.T.); +#186720 = VERTEX_POINT('',#186721); +#186721 = CARTESIAN_POINT('',(171.307142,-89.274597,1.585)); +#186722 = LINE('',#186723,#186724); +#186723 = CARTESIAN_POINT('',(171.664655,-89.271681,1.585)); +#186724 = VECTOR('',#186725,1.); +#186725 = DIRECTION('',(-0.999966738663,-8.156075471217E-03,0.)); +#186726 = ORIENTED_EDGE('',*,*,#186727,.T.); +#186727 = EDGE_CURVE('',#186720,#186728,#186730,.T.); +#186728 = VERTEX_POINT('',#186729); +#186729 = CARTESIAN_POINT('',(171.242142,-89.209597,1.585)); +#186730 = CIRCLE('',#186731,6.500103935387E-02); +#186731 = AXIS2_PLACEMENT_3D('',#186732,#186733,#186734); +#186732 = CARTESIAN_POINT('',(171.30714303934,-89.20959596065,1.585)); +#186733 = DIRECTION('',(0.,0.,-1.)); +#186734 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#186735 = ORIENTED_EDGE('',*,*,#186736,.T.); +#186736 = EDGE_CURVE('',#186728,#186619,#186737,.T.); +#186737 = LINE('',#186738,#186739); +#186738 = CARTESIAN_POINT('',(171.242142,-89.209597,1.585)); +#186739 = VECTOR('',#186740,1.); +#186740 = DIRECTION('',(0.,1.,0.)); +#186741 = FACE_BOUND('',#186742,.F.); +#186742 = EDGE_LOOP('',(#186743,#186753,#186761,#186769,#186777,#186786, + #186794,#186802)); +#186743 = ORIENTED_EDGE('',*,*,#186744,.T.); +#186744 = EDGE_CURVE('',#186745,#186747,#186749,.T.); +#186745 = VERTEX_POINT('',#186746); +#186746 = CARTESIAN_POINT('',(171.700602,-88.837837,1.585)); +#186747 = VERTEX_POINT('',#186748); +#186748 = CARTESIAN_POINT('',(171.596595,-88.803168,1.585)); +#186749 = LINE('',#186750,#186751); +#186750 = CARTESIAN_POINT('',(171.700602,-88.837837,1.585)); +#186751 = VECTOR('',#186752,1.); +#186752 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#186753 = ORIENTED_EDGE('',*,*,#186754,.T.); +#186754 = EDGE_CURVE('',#186747,#186755,#186757,.T.); +#186755 = VERTEX_POINT('',#186756); +#186756 = CARTESIAN_POINT('',(171.372142,-88.803168,1.585)); +#186757 = LINE('',#186758,#186759); +#186758 = CARTESIAN_POINT('',(171.596595,-88.803168,1.585)); +#186759 = VECTOR('',#186760,1.); +#186760 = DIRECTION('',(-1.,0.,0.)); +#186761 = ORIENTED_EDGE('',*,*,#186762,.T.); +#186762 = EDGE_CURVE('',#186755,#186763,#186765,.T.); +#186763 = VERTEX_POINT('',#186764); +#186764 = CARTESIAN_POINT('',(171.372142,-89.144597,1.585)); +#186765 = LINE('',#186766,#186767); +#186766 = CARTESIAN_POINT('',(171.372142,-88.803168,1.585)); +#186767 = VECTOR('',#186768,1.); +#186768 = DIRECTION('',(0.,-1.,0.)); +#186769 = ORIENTED_EDGE('',*,*,#186770,.T.); +#186770 = EDGE_CURVE('',#186763,#186771,#186773,.T.); +#186771 = VERTEX_POINT('',#186772); +#186772 = CARTESIAN_POINT('',(171.634654,-89.144597,1.585)); +#186773 = LINE('',#186774,#186775); +#186774 = CARTESIAN_POINT('',(171.372142,-89.144597,1.585)); +#186775 = VECTOR('',#186776,1.); +#186776 = DIRECTION('',(1.,0.,0.)); +#186777 = ORIENTED_EDGE('',*,*,#186778,.T.); +#186778 = EDGE_CURVE('',#186771,#186779,#186781,.T.); +#186779 = VERTEX_POINT('',#186780); +#186780 = CARTESIAN_POINT('',(171.756428,-89.022823,1.585)); +#186781 = CIRCLE('',#186782,0.170996196456); +#186782 = AXIS2_PLACEMENT_3D('',#186783,#186784,#186785); +#186783 = CARTESIAN_POINT('',(171.5910775,-88.9792465,1.585)); +#186784 = DIRECTION('',(0.,0.,1.)); +#186785 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#186786 = ORIENTED_EDGE('',*,*,#186787,.T.); +#186787 = EDGE_CURVE('',#186779,#186788,#186790,.T.); +#186788 = VERTEX_POINT('',#186789); +#186789 = CARTESIAN_POINT('',(171.756428,-88.924941,1.585)); +#186790 = LINE('',#186791,#186792); +#186791 = CARTESIAN_POINT('',(171.756428,-89.022823,1.585)); +#186792 = VECTOR('',#186793,1.); +#186793 = DIRECTION('',(0.,1.,0.)); +#186794 = ORIENTED_EDGE('',*,*,#186795,.T.); +#186795 = EDGE_CURVE('',#186788,#186796,#186798,.T.); +#186796 = VERTEX_POINT('',#186797); +#186797 = CARTESIAN_POINT('',(171.725149,-88.862384,1.585)); +#186798 = LINE('',#186799,#186800); +#186799 = CARTESIAN_POINT('',(171.756428,-88.924941,1.585)); +#186800 = VECTOR('',#186801,1.); +#186801 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#186802 = ORIENTED_EDGE('',*,*,#186803,.T.); +#186803 = EDGE_CURVE('',#186796,#186745,#186804,.T.); +#186804 = LINE('',#186805,#186806); +#186805 = CARTESIAN_POINT('',(171.725149,-88.862384,1.585)); +#186806 = VECTOR('',#186807,1.); +#186807 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#186808 = FACE_BOUND('',#186809,.F.); +#186809 = EDGE_LOOP('',(#186810,#186821,#186829,#186837,#186845,#186854) + ); +#186810 = ORIENTED_EDGE('',*,*,#186811,.T.); +#186811 = EDGE_CURVE('',#186812,#186814,#186816,.T.); +#186812 = VERTEX_POINT('',#186813); +#186813 = CARTESIAN_POINT('',(171.713571,-88.49637,1.585)); +#186814 = VERTEX_POINT('',#186815); +#186815 = CARTESIAN_POINT('',(171.591797,-88.374597,1.585)); +#186816 = CIRCLE('',#186817,0.170996278941); +#186817 = AXIS2_PLACEMENT_3D('',#186818,#186819,#186820); +#186818 = CARTESIAN_POINT('',(171.5482207157,-88.53994764214,1.585)); +#186819 = DIRECTION('',(0.,0.,1.)); +#186820 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#186821 = ORIENTED_EDGE('',*,*,#186822,.T.); +#186822 = EDGE_CURVE('',#186814,#186823,#186825,.T.); +#186823 = VERTEX_POINT('',#186824); +#186824 = CARTESIAN_POINT('',(171.372142,-88.374597,1.585)); +#186825 = LINE('',#186826,#186827); +#186826 = CARTESIAN_POINT('',(171.591797,-88.374597,1.585)); +#186827 = VECTOR('',#186828,1.); +#186828 = DIRECTION('',(-1.,0.,0.)); +#186829 = ORIENTED_EDGE('',*,*,#186830,.T.); +#186830 = EDGE_CURVE('',#186823,#186831,#186833,.T.); +#186831 = VERTEX_POINT('',#186832); +#186832 = CARTESIAN_POINT('',(171.372142,-88.673168,1.585)); +#186833 = LINE('',#186834,#186835); +#186834 = CARTESIAN_POINT('',(171.372142,-88.374597,1.585)); +#186835 = VECTOR('',#186836,1.); +#186836 = DIRECTION('',(0.,-1.,0.)); +#186837 = ORIENTED_EDGE('',*,*,#186838,.T.); +#186838 = EDGE_CURVE('',#186831,#186839,#186841,.T.); +#186839 = VERTEX_POINT('',#186840); +#186840 = CARTESIAN_POINT('',(171.591797,-88.673168,1.585)); +#186841 = LINE('',#186842,#186843); +#186842 = CARTESIAN_POINT('',(171.372142,-88.673168,1.585)); +#186843 = VECTOR('',#186844,1.); +#186844 = DIRECTION('',(1.,0.,0.)); +#186845 = ORIENTED_EDGE('',*,*,#186846,.T.); +#186846 = EDGE_CURVE('',#186839,#186847,#186849,.T.); +#186847 = VERTEX_POINT('',#186848); +#186848 = CARTESIAN_POINT('',(171.713571,-88.551395,1.585)); +#186849 = CIRCLE('',#186850,0.171001125777); +#186850 = AXIS2_PLACEMENT_3D('',#186851,#186852,#186853); +#186851 = CARTESIAN_POINT('',(171.54821674885,-88.50781339097,1.585)); +#186852 = DIRECTION('',(0.,0.,1.)); +#186853 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#186854 = ORIENTED_EDGE('',*,*,#186855,.T.); +#186855 = EDGE_CURVE('',#186847,#186812,#186856,.T.); +#186856 = LINE('',#186857,#186858); +#186857 = CARTESIAN_POINT('',(171.713571,-88.551395,1.585)); +#186858 = VECTOR('',#186859,1.); +#186859 = DIRECTION('',(0.,1.,0.)); +#186860 = PLANE('',#186861); +#186861 = AXIS2_PLACEMENT_3D('',#186862,#186863,#186864); +#186862 = CARTESIAN_POINT('',(0.,0.,1.585)); +#186863 = DIRECTION('',(0.,0.,1.)); +#186864 = DIRECTION('',(1.,0.,-0.)); +#186865 = SHELL_BASED_SURFACE_MODEL('',(#186866)); +#186866 = OPEN_SHELL('',(#186867)); +#186867 = ADVANCED_FACE('',(#186868),#187132,.T.); +#186868 = FACE_BOUND('',#186869,.F.); +#186869 = EDGE_LOOP('',(#186870,#186880,#186888,#186896,#186905,#186913, + #186921,#186930,#186938,#186946,#186954,#186962,#186970,#186978, + #186986,#186995,#187003,#187011,#187019,#187027,#187036,#187044, + #187052,#187061,#187069,#187077,#187085,#187093,#187101,#187109, + #187117,#187126)); +#186870 = ORIENTED_EDGE('',*,*,#186871,.T.); +#186871 = EDGE_CURVE('',#186872,#186874,#186876,.T.); +#186872 = VERTEX_POINT('',#186873); +#186873 = CARTESIAN_POINT('',(170.455558,-88.300702,1.585)); +#186874 = VERTEX_POINT('',#186875); +#186875 = CARTESIAN_POINT('',(170.563914,-88.247512,1.585)); +#186876 = LINE('',#186877,#186878); +#186877 = CARTESIAN_POINT('',(170.455558,-88.300702,1.585)); +#186878 = VECTOR('',#186879,1.); +#186879 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#186880 = ORIENTED_EDGE('',*,*,#186881,.T.); +#186881 = EDGE_CURVE('',#186874,#186882,#186884,.T.); +#186882 = VERTEX_POINT('',#186883); +#186883 = CARTESIAN_POINT('',(170.803078,-88.24663,1.585)); +#186884 = LINE('',#186885,#186886); +#186885 = CARTESIAN_POINT('',(170.563914,-88.247512,1.585)); +#186886 = VECTOR('',#186887,1.); +#186887 = DIRECTION('',(0.999993199965,3.687820919426E-03,0.)); +#186888 = ORIENTED_EDGE('',*,*,#186889,.T.); +#186889 = EDGE_CURVE('',#186882,#186890,#186892,.T.); +#186890 = VERTEX_POINT('',#186891); +#186891 = CARTESIAN_POINT('',(170.941983,-88.29079,1.585)); +#186892 = LINE('',#186893,#186894); +#186893 = CARTESIAN_POINT('',(170.803078,-88.24663,1.585)); +#186894 = VECTOR('',#186895,1.); +#186895 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#186896 = ORIENTED_EDGE('',*,*,#186897,.T.); +#186897 = EDGE_CURVE('',#186890,#186898,#186900,.T.); +#186898 = VERTEX_POINT('',#186899); +#186899 = CARTESIAN_POINT('',(170.900874,-88.414119,1.585)); +#186900 = CIRCLE('',#186901,6.499998485858E-02); +#186901 = AXIS2_PLACEMENT_3D('',#186902,#186903,#186904); +#186902 = CARTESIAN_POINT('',(170.92142749751,-88.35245416584,1.585)); +#186903 = DIRECTION('',(0.,0.,-1.)); +#186904 = DIRECTION('',(0.316238573437,0.948679695509,0.)); +#186905 = ORIENTED_EDGE('',*,*,#186906,.T.); +#186906 = EDGE_CURVE('',#186898,#186907,#186909,.T.); +#186907 = VERTEX_POINT('',#186908); +#186908 = CARTESIAN_POINT('',(170.782309,-88.374597,1.585)); +#186909 = LINE('',#186910,#186911); +#186910 = CARTESIAN_POINT('',(170.900874,-88.414119,1.585)); +#186911 = VECTOR('',#186912,1.); +#186912 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#186913 = ORIENTED_EDGE('',*,*,#186914,.T.); +#186914 = EDGE_CURVE('',#186907,#186915,#186917,.T.); +#186915 = VERTEX_POINT('',#186916); +#186916 = CARTESIAN_POINT('',(170.593916,-88.374597,1.585)); +#186917 = LINE('',#186918,#186919); +#186918 = CARTESIAN_POINT('',(170.782309,-88.374597,1.585)); +#186919 = VECTOR('',#186920,1.); +#186920 = DIRECTION('',(-1.,0.,0.)); +#186921 = ORIENTED_EDGE('',*,*,#186922,.T.); +#186922 = EDGE_CURVE('',#186915,#186923,#186925,.T.); +#186923 = VERTEX_POINT('',#186924); +#186924 = CARTESIAN_POINT('',(170.472142,-88.49637,1.585)); +#186925 = CIRCLE('',#186926,0.170991742693); +#186926 = AXIS2_PLACEMENT_3D('',#186927,#186928,#186929); +#186927 = CARTESIAN_POINT('',(170.63748857161,-88.53994392943,1.585)); +#186928 = DIRECTION('',(0.,0.,1.)); +#186929 = DIRECTION('',(-0.254822665256,0.966987802028,0.)); +#186930 = ORIENTED_EDGE('',*,*,#186931,.T.); +#186931 = EDGE_CURVE('',#186923,#186932,#186934,.T.); +#186932 = VERTEX_POINT('',#186933); +#186933 = CARTESIAN_POINT('',(170.472142,-88.551395,1.585)); +#186934 = LINE('',#186935,#186936); +#186935 = CARTESIAN_POINT('',(170.472142,-88.49637,1.585)); +#186936 = VECTOR('',#186937,1.); +#186937 = DIRECTION('',(0.,-1.,0.)); +#186938 = ORIENTED_EDGE('',*,*,#186939,.T.); +#186939 = EDGE_CURVE('',#186932,#186940,#186942,.T.); +#186940 = VERTEX_POINT('',#186941); +#186941 = CARTESIAN_POINT('',(170.50342,-88.613951,1.585)); +#186942 = LINE('',#186943,#186944); +#186943 = CARTESIAN_POINT('',(170.472142,-88.551395,1.585)); +#186944 = VECTOR('',#186945,1.); +#186945 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#186946 = ORIENTED_EDGE('',*,*,#186947,.T.); +#186947 = EDGE_CURVE('',#186940,#186948,#186950,.T.); +#186948 = VERTEX_POINT('',#186949); +#186949 = CARTESIAN_POINT('',(170.531358,-88.641889,1.585)); +#186950 = LINE('',#186951,#186952); +#186951 = CARTESIAN_POINT('',(170.50342,-88.613951,1.585)); +#186952 = VECTOR('',#186953,1.); +#186953 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#186954 = ORIENTED_EDGE('',*,*,#186955,.T.); +#186955 = EDGE_CURVE('',#186948,#186956,#186958,.T.); +#186956 = VERTEX_POINT('',#186957); +#186957 = CARTESIAN_POINT('',(170.601259,-88.676839,1.585)); +#186958 = LINE('',#186959,#186960); +#186959 = CARTESIAN_POINT('',(170.531358,-88.641889,1.585)); +#186960 = VECTOR('',#186961,1.); +#186961 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#186962 = ORIENTED_EDGE('',*,*,#186963,.T.); +#186963 = EDGE_CURVE('',#186956,#186964,#186966,.T.); +#186964 = VERTEX_POINT('',#186965); +#186965 = CARTESIAN_POINT('',(170.779068,-88.722887,1.585)); +#186966 = LINE('',#186967,#186968); +#186967 = CARTESIAN_POINT('',(170.601259,-88.676839,1.585)); +#186968 = VECTOR('',#186969,1.); +#186969 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#186970 = ORIENTED_EDGE('',*,*,#186971,.T.); +#186971 = EDGE_CURVE('',#186964,#186972,#186974,.T.); +#186972 = VERTEX_POINT('',#186973); +#186973 = CARTESIAN_POINT('',(170.881676,-88.777921,1.585)); +#186974 = LINE('',#186975,#186976); +#186975 = CARTESIAN_POINT('',(170.779068,-88.722887,1.585)); +#186976 = VECTOR('',#186977,1.); +#186977 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#186978 = ORIENTED_EDGE('',*,*,#186979,.T.); +#186979 = EDGE_CURVE('',#186972,#186980,#186982,.T.); +#186980 = VERTEX_POINT('',#186981); +#186981 = CARTESIAN_POINT('',(170.936709,-88.837671,1.585)); +#186982 = LINE('',#186983,#186984); +#186983 = CARTESIAN_POINT('',(170.881676,-88.777921,1.585)); +#186984 = VECTOR('',#186985,1.); +#186985 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#186986 = ORIENTED_EDGE('',*,*,#186987,.T.); +#186987 = EDGE_CURVE('',#186980,#186988,#186990,.T.); +#186988 = VERTEX_POINT('',#186989); +#186989 = CARTESIAN_POINT('',(170.930321,-89.16118,1.585)); +#186990 = CIRCLE('',#186991,0.260194262446); +#186991 = AXIS2_PLACEMENT_3D('',#186992,#186993,#186994); +#186992 = CARTESIAN_POINT('',(170.72977460304,-88.99540244761,1.585)); +#186993 = DIRECTION('',(0.,0.,-1.)); +#186994 = DIRECTION('',(0.795307302373,0.606206478678,0.)); +#186995 = ORIENTED_EDGE('',*,*,#186996,.T.); +#186996 = EDGE_CURVE('',#186988,#186997,#186999,.T.); +#186997 = VERTEX_POINT('',#186998); +#186998 = CARTESIAN_POINT('',(170.873021,-89.218484,1.585)); +#186999 = LINE('',#187000,#187001); +#187000 = CARTESIAN_POINT('',(170.930321,-89.16118,1.585)); +#187001 = VECTOR('',#187002,1.); +#187002 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#187003 = ORIENTED_EDGE('',*,*,#187004,.T.); +#187004 = EDGE_CURVE('',#186997,#187005,#187007,.T.); +#187005 = VERTEX_POINT('',#187006); +#187006 = CARTESIAN_POINT('',(170.764655,-89.271681,1.585)); +#187007 = LINE('',#187008,#187009); +#187008 = CARTESIAN_POINT('',(170.873021,-89.218484,1.585)); +#187009 = VECTOR('',#187010,1.); +#187010 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#187011 = ORIENTED_EDGE('',*,*,#187012,.T.); +#187012 = EDGE_CURVE('',#187005,#187013,#187015,.T.); +#187013 = VERTEX_POINT('',#187014); +#187014 = CARTESIAN_POINT('',(170.525498,-89.272564,1.585)); +#187015 = LINE('',#187016,#187017); +#187016 = CARTESIAN_POINT('',(170.764655,-89.271681,1.585)); +#187017 = VECTOR('',#187018,1.); +#187018 = DIRECTION('',(-0.999993184138,-3.692110126803E-03,0.)); +#187019 = ORIENTED_EDGE('',*,*,#187020,.T.); +#187020 = EDGE_CURVE('',#187013,#187021,#187023,.T.); +#187021 = VERTEX_POINT('',#187022); +#187022 = CARTESIAN_POINT('',(170.386587,-89.228404,1.585)); +#187023 = LINE('',#187024,#187025); +#187024 = CARTESIAN_POINT('',(170.525498,-89.272564,1.585)); +#187025 = VECTOR('',#187026,1.); +#187026 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#187027 = ORIENTED_EDGE('',*,*,#187028,.T.); +#187028 = EDGE_CURVE('',#187021,#187029,#187031,.T.); +#187029 = VERTEX_POINT('',#187030); +#187030 = CARTESIAN_POINT('',(170.427697,-89.105076,1.585)); +#187031 = CIRCLE('',#187032,6.499966862237E-02); +#187032 = AXIS2_PLACEMENT_3D('',#187033,#187034,#187035); +#187033 = CARTESIAN_POINT('',(170.40714212923,-89.16674004307,1.585)); +#187034 = DIRECTION('',(0.,0.,-1.)); +#187035 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#187036 = ORIENTED_EDGE('',*,*,#187037,.T.); +#187037 = EDGE_CURVE('',#187029,#187038,#187040,.T.); +#187038 = VERTEX_POINT('',#187039); +#187039 = CARTESIAN_POINT('',(170.546261,-89.144597,1.585)); +#187040 = LINE('',#187041,#187042); +#187041 = CARTESIAN_POINT('',(170.427697,-89.105076,1.585)); +#187042 = VECTOR('',#187043,1.); +#187043 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#187044 = ORIENTED_EDGE('',*,*,#187045,.T.); +#187045 = EDGE_CURVE('',#187038,#187046,#187048,.T.); +#187046 = VERTEX_POINT('',#187047); +#187047 = CARTESIAN_POINT('',(170.734654,-89.144597,1.585)); +#187048 = LINE('',#187049,#187050); +#187049 = CARTESIAN_POINT('',(170.546261,-89.144597,1.585)); +#187050 = VECTOR('',#187051,1.); +#187051 = DIRECTION('',(1.,0.,0.)); +#187052 = ORIENTED_EDGE('',*,*,#187053,.T.); +#187053 = EDGE_CURVE('',#187046,#187054,#187056,.T.); +#187054 = VERTEX_POINT('',#187055); +#187055 = CARTESIAN_POINT('',(170.856428,-89.022823,1.585)); +#187056 = CIRCLE('',#187057,0.170996196456); +#187057 = AXIS2_PLACEMENT_3D('',#187058,#187059,#187060); +#187058 = CARTESIAN_POINT('',(170.6910775,-88.9792465,1.585)); +#187059 = DIRECTION('',(0.,0.,1.)); +#187060 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#187061 = ORIENTED_EDGE('',*,*,#187062,.T.); +#187062 = EDGE_CURVE('',#187054,#187063,#187065,.T.); +#187063 = VERTEX_POINT('',#187064); +#187064 = CARTESIAN_POINT('',(170.856428,-88.967799,1.585)); +#187065 = LINE('',#187066,#187067); +#187066 = CARTESIAN_POINT('',(170.856428,-89.022823,1.585)); +#187067 = VECTOR('',#187068,1.); +#187068 = DIRECTION('',(0.,1.,0.)); +#187069 = ORIENTED_EDGE('',*,*,#187070,.T.); +#187070 = EDGE_CURVE('',#187063,#187071,#187073,.T.); +#187071 = VERTEX_POINT('',#187072); +#187072 = CARTESIAN_POINT('',(170.825149,-88.905242,1.585)); +#187073 = LINE('',#187074,#187075); +#187074 = CARTESIAN_POINT('',(170.856428,-88.967799,1.585)); +#187075 = VECTOR('',#187076,1.); +#187076 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#187077 = ORIENTED_EDGE('',*,*,#187078,.T.); +#187078 = EDGE_CURVE('',#187071,#187079,#187081,.T.); +#187079 = VERTEX_POINT('',#187080); +#187080 = CARTESIAN_POINT('',(170.797212,-88.877303,1.585)); +#187081 = LINE('',#187082,#187083); +#187082 = CARTESIAN_POINT('',(170.825149,-88.905242,1.585)); +#187083 = VECTOR('',#187084,1.); +#187084 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#187085 = ORIENTED_EDGE('',*,*,#187086,.T.); +#187086 = EDGE_CURVE('',#187079,#187087,#187089,.T.); +#187087 = VERTEX_POINT('',#187088); +#187088 = CARTESIAN_POINT('',(170.72731,-88.842353,1.585)); +#187089 = LINE('',#187090,#187091); +#187090 = CARTESIAN_POINT('',(170.797212,-88.877303,1.585)); +#187091 = VECTOR('',#187092,1.); +#187092 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#187093 = ORIENTED_EDGE('',*,*,#187094,.T.); +#187094 = EDGE_CURVE('',#187087,#187095,#187097,.T.); +#187095 = VERTEX_POINT('',#187096); +#187096 = CARTESIAN_POINT('',(170.549502,-88.796306,1.585)); +#187097 = LINE('',#187098,#187099); +#187098 = CARTESIAN_POINT('',(170.72731,-88.842353,1.585)); +#187099 = VECTOR('',#187100,1.); +#187100 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#187101 = ORIENTED_EDGE('',*,*,#187102,.T.); +#187102 = EDGE_CURVE('',#187095,#187103,#187105,.T.); +#187103 = VERTEX_POINT('',#187104); +#187104 = CARTESIAN_POINT('',(170.446894,-88.741273,1.585)); +#187105 = LINE('',#187106,#187107); +#187106 = CARTESIAN_POINT('',(170.549502,-88.796306,1.585)); +#187107 = VECTOR('',#187108,1.); +#187108 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#187109 = ORIENTED_EDGE('',*,*,#187110,.T.); +#187110 = EDGE_CURVE('',#187103,#187111,#187113,.T.); +#187111 = VERTEX_POINT('',#187112); +#187112 = CARTESIAN_POINT('',(170.391861,-88.681523,1.585)); +#187113 = LINE('',#187114,#187115); +#187114 = CARTESIAN_POINT('',(170.446894,-88.741273,1.585)); +#187115 = VECTOR('',#187116,1.); +#187116 = DIRECTION('',(-0.677476455829,0.73554445943,0.)); +#187117 = ORIENTED_EDGE('',*,*,#187118,.T.); +#187118 = EDGE_CURVE('',#187111,#187119,#187121,.T.); +#187119 = VERTEX_POINT('',#187120); +#187120 = CARTESIAN_POINT('',(170.398247,-88.358013,1.585)); +#187121 = CIRCLE('',#187122,0.260194992516); +#187122 = AXIS2_PLACEMENT_3D('',#187123,#187124,#187125); +#187123 = CARTESIAN_POINT('',(170.59879497292,-88.52378979176,1.585)); +#187124 = DIRECTION('',(0.,0.,-1.)); +#187125 = DIRECTION('',(-0.795303441168,-0.606211544319,-0.)); +#187126 = ORIENTED_EDGE('',*,*,#187127,.T.); +#187127 = EDGE_CURVE('',#187119,#186872,#187128,.T.); +#187128 = LINE('',#187129,#187130); +#187129 = CARTESIAN_POINT('',(170.398247,-88.358013,1.585)); +#187130 = VECTOR('',#187131,1.); +#187131 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#187132 = PLANE('',#187133); +#187133 = AXIS2_PLACEMENT_3D('',#187134,#187135,#187136); +#187134 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187135 = DIRECTION('',(0.,0.,1.)); +#187136 = DIRECTION('',(1.,0.,-0.)); +#187137 = SHELL_BASED_SURFACE_MODEL('',(#187138)); +#187138 = OPEN_SHELL('',(#187139)); +#187139 = ADVANCED_FACE('',(#187140),#187252,.T.); +#187140 = FACE_BOUND('',#187141,.F.); +#187141 = EDGE_LOOP('',(#187142,#187153,#187161,#187170,#187178,#187187, + #187195,#187204,#187212,#187221,#187229,#187238,#187246)); +#187142 = ORIENTED_EDGE('',*,*,#187143,.T.); +#187143 = EDGE_CURVE('',#187144,#187146,#187148,.T.); +#187144 = VERTEX_POINT('',#187145); +#187145 = CARTESIAN_POINT('',(169.44709,-88.284723,1.585)); +#187146 = VERTEX_POINT('',#187147); +#187147 = CARTESIAN_POINT('',(169.572142,-88.309597,1.585)); +#187148 = CIRCLE('',#187149,6.499988811649E-02); +#187149 = AXIS2_PLACEMENT_3D('',#187150,#187151,#187152); +#187150 = CARTESIAN_POINT('',(169.50714211188,-88.3095972701,1.585)); +#187151 = DIRECTION('',(0.,0.,-1.)); +#187152 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#187153 = ORIENTED_EDGE('',*,*,#187154,.T.); +#187154 = EDGE_CURVE('',#187146,#187155,#187157,.T.); +#187155 = VERTEX_POINT('',#187156); +#187156 = CARTESIAN_POINT('',(169.572142,-89.022823,1.585)); +#187157 = LINE('',#187158,#187159); +#187158 = CARTESIAN_POINT('',(169.572142,-88.309597,1.585)); +#187159 = VECTOR('',#187160,1.); +#187160 = DIRECTION('',(0.,-1.,0.)); +#187161 = ORIENTED_EDGE('',*,*,#187162,.T.); +#187162 = EDGE_CURVE('',#187155,#187163,#187165,.T.); +#187163 = VERTEX_POINT('',#187164); +#187164 = CARTESIAN_POINT('',(169.693916,-89.144597,1.585)); +#187165 = CIRCLE('',#187166,0.170999251022); +#187166 = AXIS2_PLACEMENT_3D('',#187167,#187168,#187169); +#187167 = CARTESIAN_POINT('',(169.737495,-88.979244,1.585)); +#187168 = DIRECTION('',(0.,0.,1.)); +#187169 = DIRECTION('',(-0.966980843553,-0.254849069452,0.)); +#187170 = ORIENTED_EDGE('',*,*,#187171,.T.); +#187171 = EDGE_CURVE('',#187163,#187172,#187174,.T.); +#187172 = VERTEX_POINT('',#187173); +#187173 = CARTESIAN_POINT('',(169.834654,-89.144597,1.585)); +#187174 = LINE('',#187175,#187176); +#187175 = CARTESIAN_POINT('',(169.693916,-89.144597,1.585)); +#187176 = VECTOR('',#187177,1.); +#187177 = DIRECTION('',(1.,0.,0.)); +#187178 = ORIENTED_EDGE('',*,*,#187179,.T.); +#187179 = EDGE_CURVE('',#187172,#187180,#187182,.T.); +#187180 = VERTEX_POINT('',#187181); +#187181 = CARTESIAN_POINT('',(169.956428,-89.022823,1.585)); +#187182 = CIRCLE('',#187183,0.170996196456); +#187183 = AXIS2_PLACEMENT_3D('',#187184,#187185,#187186); +#187184 = CARTESIAN_POINT('',(169.7910775,-88.9792465,1.585)); +#187185 = DIRECTION('',(0.,0.,1.)); +#187186 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#187187 = ORIENTED_EDGE('',*,*,#187188,.T.); +#187188 = EDGE_CURVE('',#187180,#187189,#187191,.T.); +#187189 = VERTEX_POINT('',#187190); +#187190 = CARTESIAN_POINT('',(169.956428,-88.309597,1.585)); +#187191 = LINE('',#187192,#187193); +#187192 = CARTESIAN_POINT('',(169.956428,-89.022823,1.585)); +#187193 = VECTOR('',#187194,1.); +#187194 = DIRECTION('',(0.,1.,0.)); +#187195 = ORIENTED_EDGE('',*,*,#187196,.T.); +#187196 = EDGE_CURVE('',#187189,#187197,#187199,.T.); +#187197 = VERTEX_POINT('',#187198); +#187198 = CARTESIAN_POINT('',(170.086428,-88.309597,1.585)); +#187199 = CIRCLE('',#187200,6.500000000093E-02); +#187200 = AXIS2_PLACEMENT_3D('',#187201,#187202,#187203); +#187201 = CARTESIAN_POINT('',(170.021428,-88.30959734486,1.585)); +#187202 = DIRECTION('',(0.,0.,-1.)); +#187203 = DIRECTION('',(-0.999999999986,5.305658462923E-06,0.)); +#187204 = ORIENTED_EDGE('',*,*,#187205,.T.); +#187205 = EDGE_CURVE('',#187197,#187206,#187208,.T.); +#187206 = VERTEX_POINT('',#187207); +#187207 = CARTESIAN_POINT('',(170.083512,-89.052824,1.585)); +#187208 = LINE('',#187209,#187210); +#187209 = CARTESIAN_POINT('',(170.086428,-88.309597,1.585)); +#187210 = VECTOR('',#187211,1.); +#187211 = DIRECTION('',(-3.923401002397E-03,-0.999992303433,0.)); +#187212 = ORIENTED_EDGE('',*,*,#187213,.T.); +#187213 = EDGE_CURVE('',#187206,#187214,#187216,.T.); +#187214 = VERTEX_POINT('',#187215); +#187215 = CARTESIAN_POINT('',(169.864655,-89.271681,1.585)); +#187216 = CIRCLE('',#187217,0.308111908981); +#187217 = AXIS2_PLACEMENT_3D('',#187218,#187219,#187220); +#187218 = CARTESIAN_POINT('',(169.78569061898,-88.97385961898,1.585)); +#187219 = DIRECTION('',(0.,0.,-1.)); +#187220 = DIRECTION('',(0.966601330004,-0.256284741712,0.)); +#187221 = ORIENTED_EDGE('',*,*,#187222,.T.); +#187222 = EDGE_CURVE('',#187214,#187223,#187225,.T.); +#187223 = VERTEX_POINT('',#187224); +#187224 = CARTESIAN_POINT('',(169.663914,-89.271681,1.585)); +#187225 = LINE('',#187226,#187227); +#187226 = CARTESIAN_POINT('',(169.864655,-89.271681,1.585)); +#187227 = VECTOR('',#187228,1.); +#187228 = DIRECTION('',(-1.,0.,0.)); +#187229 = ORIENTED_EDGE('',*,*,#187230,.T.); +#187230 = EDGE_CURVE('',#187223,#187231,#187233,.T.); +#187231 = VERTEX_POINT('',#187232); +#187232 = CARTESIAN_POINT('',(169.445057,-89.052824,1.585)); +#187233 = CIRCLE('',#187234,0.308110297261); +#187234 = AXIS2_PLACEMENT_3D('',#187235,#187236,#187237); +#187235 = CARTESIAN_POINT('',(169.74287706304,-88.97386093695,1.585)); +#187236 = DIRECTION('',(0.,0.,-1.)); +#187237 = DIRECTION('',(-0.256281804756,-0.966602108704,-0.)); +#187238 = ORIENTED_EDGE('',*,*,#187239,.T.); +#187239 = EDGE_CURVE('',#187231,#187240,#187242,.T.); +#187240 = VERTEX_POINT('',#187241); +#187241 = CARTESIAN_POINT('',(169.442142,-88.309597,1.585)); +#187242 = LINE('',#187243,#187244); +#187243 = CARTESIAN_POINT('',(169.445057,-89.052824,1.585)); +#187244 = VECTOR('',#187245,1.); +#187245 = DIRECTION('',(-3.922055549506E-03,0.999992308711,0.)); +#187246 = ORIENTED_EDGE('',*,*,#187247,.T.); +#187247 = EDGE_CURVE('',#187240,#187144,#187248,.T.); +#187248 = LINE('',#187249,#187250); +#187249 = CARTESIAN_POINT('',(169.442142,-88.309597,1.585)); +#187250 = VECTOR('',#187251,1.); +#187251 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#187252 = PLANE('',#187253); +#187253 = AXIS2_PLACEMENT_3D('',#187254,#187255,#187256); +#187254 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187255 = DIRECTION('',(0.,0.,1.)); +#187256 = DIRECTION('',(1.,0.,-0.)); +#187257 = SHELL_BASED_SURFACE_MODEL('',(#187258)); +#187258 = OPEN_SHELL('',(#187259)); +#187259 = ADVANCED_FACE('',(#187260),#187419,.T.); +#187260 = FACE_BOUND('',#187261,.F.); +#187261 = EDGE_LOOP('',(#187262,#187273,#187281,#187289,#187297,#187305, + #187313,#187321,#187330,#187338,#187347,#187355,#187363,#187371, + #187380,#187388,#187396,#187404,#187413)); +#187262 = ORIENTED_EDGE('',*,*,#187263,.T.); +#187263 = EDGE_CURVE('',#187264,#187266,#187268,.T.); +#187264 = VERTEX_POINT('',#187265); +#187265 = CARTESIAN_POINT('',(142.000966,-87.958456,1.585)); +#187266 = VERTEX_POINT('',#187267); +#187267 = CARTESIAN_POINT('',(142.510361,-87.967786,1.585)); +#187268 = CIRCLE('',#187269,0.450326844012); +#187269 = AXIS2_PLACEMENT_3D('',#187270,#187271,#187272); +#187270 = CARTESIAN_POINT('',(142.2488630301,-88.33440989199,1.585)); +#187271 = DIRECTION('',(0.,0.,-1.)); +#187272 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#187273 = ORIENTED_EDGE('',*,*,#187274,.T.); +#187274 = EDGE_CURVE('',#187266,#187275,#187277,.T.); +#187275 = VERTEX_POINT('',#187276); +#187276 = CARTESIAN_POINT('',(142.573814,-88.033316,1.585)); +#187277 = LINE('',#187278,#187279); +#187278 = CARTESIAN_POINT('',(142.510361,-87.967786,1.585)); +#187279 = VECTOR('',#187280,1.); +#187280 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#187281 = ORIENTED_EDGE('',*,*,#187282,.T.); +#187282 = EDGE_CURVE('',#187275,#187283,#187285,.T.); +#187283 = VERTEX_POINT('',#187284); +#187284 = CARTESIAN_POINT('',(142.631875,-88.153763,1.585)); +#187285 = LINE('',#187286,#187287); +#187286 = CARTESIAN_POINT('',(142.573814,-88.033316,1.585)); +#187287 = VECTOR('',#187288,1.); +#187288 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#187289 = ORIENTED_EDGE('',*,*,#187290,.T.); +#187290 = EDGE_CURVE('',#187283,#187291,#187293,.T.); +#187291 = VERTEX_POINT('',#187292); +#187292 = CARTESIAN_POINT('',(142.631116,-88.280095,1.585)); +#187293 = LINE('',#187294,#187295); +#187294 = CARTESIAN_POINT('',(142.631875,-88.153763,1.585)); +#187295 = VECTOR('',#187296,1.); +#187296 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#187297 = ORIENTED_EDGE('',*,*,#187298,.T.); +#187298 = EDGE_CURVE('',#187291,#187299,#187301,.T.); +#187299 = VERTEX_POINT('',#187300); +#187300 = CARTESIAN_POINT('',(142.573058,-88.448158,1.585)); +#187301 = LINE('',#187302,#187303); +#187302 = CARTESIAN_POINT('',(142.631116,-88.280095,1.585)); +#187303 = VECTOR('',#187304,1.); +#187304 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#187305 = ORIENTED_EDGE('',*,*,#187306,.T.); +#187306 = EDGE_CURVE('',#187299,#187307,#187309,.T.); +#187307 = VERTEX_POINT('',#187308); +#187308 = CARTESIAN_POINT('',(142.120335,-88.902919,1.585)); +#187309 = LINE('',#187310,#187311); +#187310 = CARTESIAN_POINT('',(142.573058,-88.448158,1.585)); +#187311 = VECTOR('',#187312,1.); +#187312 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#187313 = ORIENTED_EDGE('',*,*,#187314,.T.); +#187314 = EDGE_CURVE('',#187307,#187315,#187317,.T.); +#187315 = VERTEX_POINT('',#187316); +#187316 = CARTESIAN_POINT('',(142.572948,-88.90436,1.585)); +#187317 = LINE('',#187318,#187319); +#187318 = CARTESIAN_POINT('',(142.120335,-88.902919,1.585)); +#187319 = VECTOR('',#187320,1.); +#187320 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#187321 = ORIENTED_EDGE('',*,*,#187322,.T.); +#187322 = EDGE_CURVE('',#187315,#187323,#187325,.T.); +#187323 = VERTEX_POINT('',#187324); +#187324 = CARTESIAN_POINT('',(142.558316,-89.052919,1.585)); +#187325 = CIRCLE('',#187326,7.500006711464E-02); +#187326 = AXIS2_PLACEMENT_3D('',#187327,#187328,#187329); +#187327 = CARTESIAN_POINT('',(142.55831606711,-88.97791893288,1.585)); +#187328 = DIRECTION('',(0.,0.,-1.)); +#187329 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#187330 = ORIENTED_EDGE('',*,*,#187331,.T.); +#187331 = EDGE_CURVE('',#187323,#187332,#187334,.T.); +#187332 = VERTEX_POINT('',#187333); +#187333 = CARTESIAN_POINT('',(141.924637,-89.051478,1.585)); +#187334 = LINE('',#187335,#187336); +#187335 = CARTESIAN_POINT('',(142.558316,-89.052919,1.585)); +#187336 = VECTOR('',#187337,1.); +#187337 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#187338 = ORIENTED_EDGE('',*,*,#187339,.T.); +#187339 = EDGE_CURVE('',#187332,#187340,#187342,.T.); +#187340 = VERTEX_POINT('',#187341); +#187341 = CARTESIAN_POINT('',(141.886236,-88.924886,1.585)); +#187342 = CIRCLE('',#187343,7.500021013112E-02); +#187343 = AXIS2_PLACEMENT_3D('',#187344,#187345,#187346); +#187344 = CARTESIAN_POINT('',(141.9392693167,-88.97791899764,1.585)); +#187345 = DIRECTION('',(0.,0.,-1.)); +#187346 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#187347 = ORIENTED_EDGE('',*,*,#187348,.T.); +#187348 = EDGE_CURVE('',#187340,#187349,#187351,.T.); +#187349 = VERTEX_POINT('',#187350); +#187350 = CARTESIAN_POINT('',(142.445144,-88.365976,1.585)); +#187351 = LINE('',#187352,#187353); +#187352 = CARTESIAN_POINT('',(141.886236,-88.924886,1.585)); +#187353 = VECTOR('',#187354,1.); +#187354 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#187355 = ORIENTED_EDGE('',*,*,#187356,.T.); +#187356 = EDGE_CURVE('',#187349,#187357,#187359,.T.); +#187357 = VERTEX_POINT('',#187358); +#187358 = CARTESIAN_POINT('',(142.483316,-88.251463,1.585)); +#187359 = LINE('',#187360,#187361); +#187360 = CARTESIAN_POINT('',(142.445144,-88.365976,1.585)); +#187361 = VECTOR('',#187362,1.); +#187362 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#187363 = ORIENTED_EDGE('',*,*,#187364,.T.); +#187364 = EDGE_CURVE('',#187357,#187365,#187367,.T.); +#187365 = VERTEX_POINT('',#187366); +#187366 = CARTESIAN_POINT('',(142.483316,-88.1861,1.585)); +#187367 = LINE('',#187368,#187369); +#187368 = CARTESIAN_POINT('',(142.483316,-88.251463,1.585)); +#187369 = VECTOR('',#187370,1.); +#187370 = DIRECTION('',(0.,1.,0.)); +#187371 = ORIENTED_EDGE('',*,*,#187372,.T.); +#187372 = EDGE_CURVE('',#187365,#187373,#187375,.T.); +#187373 = VERTEX_POINT('',#187374); +#187374 = CARTESIAN_POINT('',(142.350135,-88.052919,1.585)); +#187375 = CIRCLE('',#187376,0.18686440374); +#187376 = AXIS2_PLACEMENT_3D('',#187377,#187378,#187379); +#187377 = CARTESIAN_POINT('',(142.302599,-88.233636,1.585)); +#187378 = DIRECTION('',(0.,0.,1.)); +#187379 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#187380 = ORIENTED_EDGE('',*,*,#187381,.T.); +#187381 = EDGE_CURVE('',#187373,#187382,#187384,.T.); +#187382 = VERTEX_POINT('',#187383); +#187383 = CARTESIAN_POINT('',(142.14745,-88.052919,1.585)); +#187384 = LINE('',#187385,#187386); +#187385 = CARTESIAN_POINT('',(142.350135,-88.052919,1.585)); +#187386 = VECTOR('',#187387,1.); +#187387 = DIRECTION('',(-1.,0.,0.)); +#187388 = ORIENTED_EDGE('',*,*,#187389,.T.); +#187389 = EDGE_CURVE('',#187382,#187390,#187392,.T.); +#187390 = VERTEX_POINT('',#187391); +#187391 = CARTESIAN_POINT('',(142.078934,-88.087177,1.585)); +#187392 = LINE('',#187393,#187394); +#187393 = CARTESIAN_POINT('',(142.14745,-88.052919,1.585)); +#187394 = VECTOR('',#187395,1.); +#187395 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#187396 = ORIENTED_EDGE('',*,*,#187397,.T.); +#187397 = EDGE_CURVE('',#187390,#187398,#187400,.T.); +#187398 = VERTEX_POINT('',#187399); +#187399 = CARTESIAN_POINT('',(142.028556,-88.135517,1.585)); +#187400 = LINE('',#187401,#187402); +#187401 = CARTESIAN_POINT('',(142.078934,-88.087177,1.585)); +#187402 = VECTOR('',#187403,1.); +#187403 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#187404 = ORIENTED_EDGE('',*,*,#187405,.T.); +#187405 = EDGE_CURVE('',#187398,#187406,#187408,.T.); +#187406 = VERTEX_POINT('',#187407); +#187407 = CARTESIAN_POINT('',(141.933855,-88.020124,1.585)); +#187408 = CIRCLE('',#187409,7.499996838528E-02); +#187409 = AXIS2_PLACEMENT_3D('',#187410,#187411,#187412); +#187410 = CARTESIAN_POINT('',(141.986888,-88.07315697246,1.585)); +#187411 = DIRECTION('',(0.,0.,-1.)); +#187412 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#187413 = ORIENTED_EDGE('',*,*,#187414,.T.); +#187414 = EDGE_CURVE('',#187406,#187264,#187415,.T.); +#187415 = LINE('',#187416,#187417); +#187416 = CARTESIAN_POINT('',(141.933855,-88.020124,1.585)); +#187417 = VECTOR('',#187418,1.); +#187418 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#187419 = PLANE('',#187420); +#187420 = AXIS2_PLACEMENT_3D('',#187421,#187422,#187423); +#187421 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187422 = DIRECTION('',(0.,0.,1.)); +#187423 = DIRECTION('',(1.,0.,-0.)); +#187424 = SHELL_BASED_SURFACE_MODEL('',(#187425)); +#187425 = OPEN_SHELL('',(#187426)); +#187426 = ADVANCED_FACE('',(#187427),#187513,.T.); +#187427 = FACE_BOUND('',#187428,.F.); +#187428 = EDGE_LOOP('',(#187429,#187440,#187448,#187457,#187465,#187474, + #187482,#187491,#187499,#187507)); +#187429 = ORIENTED_EDGE('',*,*,#187430,.T.); +#187430 = EDGE_CURVE('',#187431,#187433,#187435,.T.); +#187431 = VERTEX_POINT('',#187432); +#187432 = CARTESIAN_POINT('',(140.516648,-87.915559,1.585)); +#187433 = VERTEX_POINT('',#187434); +#187434 = CARTESIAN_POINT('',(140.633316,-87.977919,1.585)); +#187435 = CIRCLE('',#187436,7.500000000004E-02); +#187436 = AXIS2_PLACEMENT_3D('',#187437,#187438,#187439); +#187437 = CARTESIAN_POINT('',(140.558316,-87.97791906555,1.585)); +#187438 = DIRECTION('',(0.,0.,-1.)); +#187439 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#187440 = ORIENTED_EDGE('',*,*,#187441,.T.); +#187441 = EDGE_CURVE('',#187433,#187442,#187444,.T.); +#187442 = VERTEX_POINT('',#187443); +#187443 = CARTESIAN_POINT('',(140.631116,-88.708666,1.585)); +#187444 = LINE('',#187445,#187446); +#187445 = CARTESIAN_POINT('',(140.633316,-87.977919,1.585)); +#187446 = VECTOR('',#187447,1.); +#187447 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#187448 = ORIENTED_EDGE('',*,*,#187449,.T.); +#187449 = EDGE_CURVE('',#187442,#187450,#187452,.T.); +#187450 = VERTEX_POINT('',#187451); +#187451 = CARTESIAN_POINT('',(140.280007,-89.052189,1.585)); +#187452 = CIRCLE('',#187453,0.38184101318); +#187453 = AXIS2_PLACEMENT_3D('',#187454,#187455,#187456); +#187454 = CARTESIAN_POINT('',(140.25109350032,-88.67144424444,1.585)); +#187455 = DIRECTION('',(0.,0.,-1.)); +#187456 = DIRECTION('',(0.995237511316,-9.747972132576E-02,0.)); +#187457 = ORIENTED_EDGE('',*,*,#187458,.T.); +#187458 = EDGE_CURVE('',#187450,#187459,#187461,.T.); +#187459 = VERTEX_POINT('',#187460); +#187460 = CARTESIAN_POINT('',(140.162732,-89.051478,1.585)); +#187461 = LINE('',#187462,#187463); +#187462 = CARTESIAN_POINT('',(140.280007,-89.052189,1.585)); +#187463 = VECTOR('',#187464,1.); +#187464 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#187465 = ORIENTED_EDGE('',*,*,#187466,.T.); +#187466 = EDGE_CURVE('',#187459,#187467,#187469,.T.); +#187467 = VERTEX_POINT('',#187468); +#187468 = CARTESIAN_POINT('',(140.177364,-88.902919,1.585)); +#187469 = CIRCLE('',#187470,7.500006711464E-02); +#187470 = AXIS2_PLACEMENT_3D('',#187471,#187472,#187473); +#187471 = CARTESIAN_POINT('',(140.17736393288,-88.97791906711,1.585)); +#187472 = DIRECTION('',(0.,0.,-1.)); +#187473 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#187474 = ORIENTED_EDGE('',*,*,#187475,.T.); +#187475 = EDGE_CURVE('',#187467,#187476,#187478,.T.); +#187476 = VERTEX_POINT('',#187477); +#187477 = CARTESIAN_POINT('',(140.260432,-88.902919,1.585)); +#187478 = LINE('',#187479,#187480); +#187479 = CARTESIAN_POINT('',(140.177364,-88.902919,1.585)); +#187480 = VECTOR('',#187481,1.); +#187481 = DIRECTION('',(1.,0.,0.)); +#187482 = ORIENTED_EDGE('',*,*,#187483,.T.); +#187483 = EDGE_CURVE('',#187476,#187484,#187486,.T.); +#187484 = VERTEX_POINT('',#187485); +#187485 = CARTESIAN_POINT('',(140.483316,-88.680034,1.585)); +#187486 = CIRCLE('',#187487,0.239437351684); +#187487 = AXIS2_PLACEMENT_3D('',#187488,#187489,#187490); +#187488 = CARTESIAN_POINT('',(140.24441490658,-88.66401797844,1.585)); +#187489 = DIRECTION('',(0.,0.,1.)); +#187490 = DIRECTION('',(6.689471506024E-02,-0.997760039838,0.)); +#187491 = ORIENTED_EDGE('',*,*,#187492,.T.); +#187492 = EDGE_CURVE('',#187484,#187493,#187495,.T.); +#187493 = VERTEX_POINT('',#187494); +#187494 = CARTESIAN_POINT('',(140.484757,-87.963287,1.585)); +#187495 = LINE('',#187496,#187497); +#187496 = CARTESIAN_POINT('',(140.483316,-88.680034,1.585)); +#187497 = VECTOR('',#187498,1.); +#187498 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#187499 = ORIENTED_EDGE('',*,*,#187500,.T.); +#187500 = EDGE_CURVE('',#187493,#187501,#187503,.T.); +#187501 = VERTEX_POINT('',#187502); +#187502 = CARTESIAN_POINT('',(140.495956,-87.936251,1.585)); +#187503 = LINE('',#187504,#187505); +#187504 = CARTESIAN_POINT('',(140.484757,-87.963287,1.585)); +#187505 = VECTOR('',#187506,1.); +#187506 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#187507 = ORIENTED_EDGE('',*,*,#187508,.T.); +#187508 = EDGE_CURVE('',#187501,#187431,#187509,.T.); +#187509 = LINE('',#187510,#187511); +#187510 = CARTESIAN_POINT('',(140.495956,-87.936251,1.585)); +#187511 = VECTOR('',#187512,1.); +#187512 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#187513 = PLANE('',#187514); +#187514 = AXIS2_PLACEMENT_3D('',#187515,#187516,#187517); +#187515 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187516 = DIRECTION('',(0.,0.,1.)); +#187517 = DIRECTION('',(1.,0.,-0.)); +#187518 = SHELL_BASED_SURFACE_MODEL('',(#187519)); +#187519 = OPEN_SHELL('',(#187520)); +#187520 = ADVANCED_FACE('',(#187521,#187599),#187651,.T.); +#187521 = FACE_BOUND('',#187522,.F.); +#187522 = EDGE_LOOP('',(#187523,#187534,#187542,#187551,#187559,#187568, + #187576,#187584,#187593)); +#187523 = ORIENTED_EDGE('',*,*,#187524,.T.); +#187524 = EDGE_CURVE('',#187525,#187527,#187529,.T.); +#187525 = VERTEX_POINT('',#187526); +#187526 = CARTESIAN_POINT('',(140.960948,-87.963287,1.585)); +#187527 = VERTEX_POINT('',#187528); +#187528 = CARTESIAN_POINT('',(141.034507,-87.902919,1.585)); +#187529 = CIRCLE('',#187530,7.500074938991E-02); +#187530 = AXIS2_PLACEMENT_3D('',#187531,#187532,#187533); +#187531 = CARTESIAN_POINT('',(141.03450746611,-87.97791974938,1.585)); +#187532 = DIRECTION('',(0.,0.,-1.)); +#187533 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#187534 = ORIENTED_EDGE('',*,*,#187535,.T.); +#187535 = EDGE_CURVE('',#187527,#187536,#187538,.T.); +#187536 = VERTEX_POINT('',#187537); +#187537 = CARTESIAN_POINT('',(141.430091,-87.90436,1.585)); +#187538 = LINE('',#187539,#187540); +#187539 = CARTESIAN_POINT('',(141.034507,-87.902919,1.585)); +#187540 = VECTOR('',#187541,1.); +#187541 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#187542 = ORIENTED_EDGE('',*,*,#187543,.T.); +#187543 = EDGE_CURVE('',#187536,#187544,#187546,.T.); +#187544 = VERTEX_POINT('',#187545); +#187545 = CARTESIAN_POINT('',(141.679494,-88.153763,1.585)); +#187546 = CIRCLE('',#187547,0.347870264855); +#187547 = AXIS2_PLACEMENT_3D('',#187548,#187549,#187550); +#187548 = CARTESIAN_POINT('',(141.34276326502,-88.24109073497,1.585)); +#187549 = DIRECTION('',(0.,0.,-1.)); +#187550 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#187551 = ORIENTED_EDGE('',*,*,#187552,.T.); +#187552 = EDGE_CURVE('',#187544,#187553,#187555,.T.); +#187553 = VERTEX_POINT('',#187554); +#187554 = CARTESIAN_POINT('',(141.678272,-88.331062,1.585)); +#187555 = LINE('',#187556,#187557); +#187556 = CARTESIAN_POINT('',(141.679494,-88.153763,1.585)); +#187557 = VECTOR('',#187558,1.); +#187558 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#187559 = ORIENTED_EDGE('',*,*,#187560,.T.); +#187560 = EDGE_CURVE('',#187553,#187561,#187563,.T.); +#187561 = VERTEX_POINT('',#187562); +#187562 = CARTESIAN_POINT('',(141.430091,-88.575287,1.585)); +#187563 = CIRCLE('',#187564,0.348632345849); +#187564 = AXIS2_PLACEMENT_3D('',#187565,#187566,#187567); +#187565 = CARTESIAN_POINT('',(141.34232219403,-88.2378834593,1.585)); +#187566 = DIRECTION('',(0.,0.,-1.)); +#187567 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#187568 = ORIENTED_EDGE('',*,*,#187569,.T.); +#187569 = EDGE_CURVE('',#187561,#187570,#187572,.T.); +#187570 = VERTEX_POINT('',#187571); +#187571 = CARTESIAN_POINT('',(141.109507,-88.576728,1.585)); +#187572 = LINE('',#187573,#187574); +#187573 = CARTESIAN_POINT('',(141.430091,-88.575287,1.585)); +#187574 = VECTOR('',#187575,1.); +#187575 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#187576 = ORIENTED_EDGE('',*,*,#187577,.T.); +#187577 = EDGE_CURVE('',#187570,#187578,#187580,.T.); +#187578 = VERTEX_POINT('',#187579); +#187579 = CARTESIAN_POINT('',(141.108066,-88.992551,1.585)); +#187580 = LINE('',#187581,#187582); +#187581 = CARTESIAN_POINT('',(141.109507,-88.576728,1.585)); +#187582 = VECTOR('',#187583,1.); +#187583 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#187584 = ORIENTED_EDGE('',*,*,#187585,.T.); +#187585 = EDGE_CURVE('',#187578,#187586,#187588,.T.); +#187586 = VERTEX_POINT('',#187587); +#187587 = CARTESIAN_POINT('',(140.959507,-88.977919,1.585)); +#187588 = CIRCLE('',#187589,7.500006711463E-02); +#187589 = AXIS2_PLACEMENT_3D('',#187590,#187591,#187592); +#187590 = CARTESIAN_POINT('',(141.03450706711,-88.97791906711,1.585)); +#187591 = DIRECTION('',(-0.,0.,-1.)); +#187592 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#187593 = ORIENTED_EDGE('',*,*,#187594,.T.); +#187594 = EDGE_CURVE('',#187586,#187525,#187595,.T.); +#187595 = LINE('',#187596,#187597); +#187596 = CARTESIAN_POINT('',(140.959507,-88.977919,1.585)); +#187597 = VECTOR('',#187598,1.); +#187598 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#187599 = FACE_BOUND('',#187600,.F.); +#187600 = EDGE_LOOP('',(#187601,#187612,#187620,#187628,#187636,#187645) + ); +#187601 = ORIENTED_EDGE('',*,*,#187602,.T.); +#187602 = EDGE_CURVE('',#187603,#187605,#187607,.T.); +#187603 = VERTEX_POINT('',#187604); +#187604 = CARTESIAN_POINT('',(141.530935,-88.1861,1.585)); +#187605 = VERTEX_POINT('',#187606); +#187606 = CARTESIAN_POINT('',(141.397754,-88.052919,1.585)); +#187607 = CIRCLE('',#187608,0.18686440374); +#187608 = AXIS2_PLACEMENT_3D('',#187609,#187610,#187611); +#187609 = CARTESIAN_POINT('',(141.350218,-88.233636,1.585)); +#187610 = DIRECTION('',(0.,0.,1.)); +#187611 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#187612 = ORIENTED_EDGE('',*,*,#187613,.T.); +#187613 = EDGE_CURVE('',#187605,#187614,#187616,.T.); +#187614 = VERTEX_POINT('',#187615); +#187615 = CARTESIAN_POINT('',(141.109507,-88.052919,1.585)); +#187616 = LINE('',#187617,#187618); +#187617 = CARTESIAN_POINT('',(141.397754,-88.052919,1.585)); +#187618 = VECTOR('',#187619,1.); +#187619 = DIRECTION('',(-1.,0.,0.)); +#187620 = ORIENTED_EDGE('',*,*,#187621,.T.); +#187621 = EDGE_CURVE('',#187614,#187622,#187624,.T.); +#187622 = VERTEX_POINT('',#187623); +#187623 = CARTESIAN_POINT('',(141.109507,-88.426728,1.585)); +#187624 = LINE('',#187625,#187626); +#187625 = CARTESIAN_POINT('',(141.109507,-88.052919,1.585)); +#187626 = VECTOR('',#187627,1.); +#187627 = DIRECTION('',(0.,-1.,0.)); +#187628 = ORIENTED_EDGE('',*,*,#187629,.T.); +#187629 = EDGE_CURVE('',#187622,#187630,#187632,.T.); +#187630 = VERTEX_POINT('',#187631); +#187631 = CARTESIAN_POINT('',(141.397754,-88.426728,1.585)); +#187632 = LINE('',#187633,#187634); +#187633 = CARTESIAN_POINT('',(141.109507,-88.426728,1.585)); +#187634 = VECTOR('',#187635,1.); +#187635 = DIRECTION('',(1.,0.,0.)); +#187636 = ORIENTED_EDGE('',*,*,#187637,.T.); +#187637 = EDGE_CURVE('',#187630,#187638,#187640,.T.); +#187638 = VERTEX_POINT('',#187639); +#187639 = CARTESIAN_POINT('',(141.530935,-88.293547,1.585)); +#187640 = CIRCLE('',#187641,0.18686440374); +#187641 = AXIS2_PLACEMENT_3D('',#187642,#187643,#187644); +#187642 = CARTESIAN_POINT('',(141.350218,-88.246011,1.585)); +#187643 = DIRECTION('',(0.,0.,1.)); +#187644 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#187645 = ORIENTED_EDGE('',*,*,#187646,.T.); +#187646 = EDGE_CURVE('',#187638,#187603,#187647,.T.); +#187647 = LINE('',#187648,#187649); +#187648 = CARTESIAN_POINT('',(141.530935,-88.293547,1.585)); +#187649 = VECTOR('',#187650,1.); +#187650 = DIRECTION('',(0.,1.,0.)); +#187651 = PLANE('',#187652); +#187652 = AXIS2_PLACEMENT_3D('',#187653,#187654,#187655); +#187653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187654 = DIRECTION('',(0.,0.,1.)); +#187655 = DIRECTION('',(1.,0.,-0.)); +#187656 = SHELL_BASED_SURFACE_MODEL('',(#187657)); +#187657 = OPEN_SHELL('',(#187658)); +#187658 = ADVANCED_FACE('',(#187659),#187769,.T.); +#187659 = FACE_BOUND('',#187660,.F.); +#187660 = EDGE_LOOP('',(#187661,#187672,#187680,#187689,#187697,#187705, + #187713,#187721,#187729,#187738,#187746,#187755,#187763)); +#187661 = ORIENTED_EDGE('',*,*,#187662,.T.); +#187662 = EDGE_CURVE('',#187663,#187665,#187667,.T.); +#187663 = VERTEX_POINT('',#187664); +#187664 = CARTESIAN_POINT('',(185.04894,-88.047652,1.585)); +#187665 = VERTEX_POINT('',#187666); +#187666 = CARTESIAN_POINT('',(185.04894,-87.83188,1.585)); +#187667 = CIRCLE('',#187668,0.109999639072); +#187668 = AXIS2_PLACEMENT_3D('',#187669,#187670,#187671); +#187669 = CARTESIAN_POINT('',(185.0704,-87.939766,1.585)); +#187670 = DIRECTION('',(0.,0.,-1.)); +#187671 = DIRECTION('',(-0.195091549218,-0.980785036297,-0.)); +#187672 = ORIENTED_EDGE('',*,*,#187673,.T.); +#187673 = EDGE_CURVE('',#187665,#187674,#187676,.T.); +#187674 = VERTEX_POINT('',#187675); +#187675 = CARTESIAN_POINT('',(186.675916,-87.830309,1.585)); +#187676 = LINE('',#187677,#187678); +#187677 = CARTESIAN_POINT('',(185.04894,-87.83188,1.585)); +#187678 = VECTOR('',#187679,1.); +#187679 = DIRECTION('',(0.999999533813,9.655946170191E-04,0.)); +#187680 = ORIENTED_EDGE('',*,*,#187681,.T.); +#187681 = EDGE_CURVE('',#187674,#187682,#187684,.T.); +#187682 = VERTEX_POINT('',#187683); +#187683 = CARTESIAN_POINT('',(186.778286,-87.918306,1.585)); +#187684 = CIRCLE('',#187685,0.108572695323); +#187685 = AXIS2_PLACEMENT_3D('',#187686,#187687,#187688); +#187686 = CARTESIAN_POINT('',(186.67166475277,-87.93879843297,1.585)); +#187687 = DIRECTION('',(0.,0.,-1.)); +#187688 = DIRECTION('',(3.915576762808E-02,0.999233118877,0.)); +#187689 = ORIENTED_EDGE('',*,*,#187690,.T.); +#187690 = EDGE_CURVE('',#187682,#187691,#187693,.T.); +#187691 = VERTEX_POINT('',#187692); +#187692 = CARTESIAN_POINT('',(186.778286,-87.961226,1.585)); +#187693 = LINE('',#187694,#187695); +#187694 = CARTESIAN_POINT('',(186.778286,-87.918306,1.585)); +#187695 = VECTOR('',#187696,1.); +#187696 = DIRECTION('',(0.,-1.,0.)); +#187697 = ORIENTED_EDGE('',*,*,#187698,.T.); +#187698 = EDGE_CURVE('',#187691,#187699,#187701,.T.); +#187699 = VERTEX_POINT('',#187700); +#187700 = CARTESIAN_POINT('',(186.761862,-88.000879,1.585)); +#187701 = LINE('',#187702,#187703); +#187702 = CARTESIAN_POINT('',(186.778286,-87.961226,1.585)); +#187703 = VECTOR('',#187704,1.); +#187704 = DIRECTION('',(-0.382667315962,-0.923886207979,0.)); +#187705 = ORIENTED_EDGE('',*,*,#187706,.T.); +#187706 = EDGE_CURVE('',#187699,#187707,#187709,.T.); +#187707 = VERTEX_POINT('',#187708); +#187708 = CARTESIAN_POINT('',(186.724975,-88.035273,1.585)); +#187709 = LINE('',#187710,#187711); +#187710 = CARTESIAN_POINT('',(186.761862,-88.000879,1.585)); +#187711 = VECTOR('',#187712,1.); +#187712 = DIRECTION('',(-0.731390134344,-0.681959288656,0.)); +#187713 = ORIENTED_EDGE('',*,*,#187714,.T.); +#187714 = EDGE_CURVE('',#187707,#187715,#187717,.T.); +#187715 = VERTEX_POINT('',#187716); +#187716 = CARTESIAN_POINT('',(185.484612,-88.744052,1.585)); +#187717 = LINE('',#187718,#187719); +#187718 = CARTESIAN_POINT('',(186.724975,-88.035273,1.585)); +#187719 = VECTOR('',#187720,1.); +#187720 = DIRECTION('',(-0.868243099048,-0.49613901374,0.)); +#187721 = ORIENTED_EDGE('',*,*,#187722,.T.); +#187722 = EDGE_CURVE('',#187715,#187723,#187725,.T.); +#187723 = VERTEX_POINT('',#187724); +#187724 = CARTESIAN_POINT('',(186.69186,-88.746166,1.585)); +#187725 = LINE('',#187726,#187727); +#187726 = CARTESIAN_POINT('',(185.484612,-88.744052,1.585)); +#187727 = VECTOR('',#187728,1.); +#187728 = DIRECTION('',(0.999998466845,-1.751087397881E-03,0.)); +#187729 = ORIENTED_EDGE('',*,*,#187730,.T.); +#187730 = EDGE_CURVE('',#187723,#187731,#187733,.T.); +#187731 = VERTEX_POINT('',#187732); +#187732 = CARTESIAN_POINT('',(186.69186,-88.961938,1.585)); +#187733 = CIRCLE('',#187734,0.109999639072); +#187734 = AXIS2_PLACEMENT_3D('',#187735,#187736,#187737); +#187735 = CARTESIAN_POINT('',(186.6704,-88.854052,1.585)); +#187736 = DIRECTION('',(0.,0.,-1.)); +#187737 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#187738 = ORIENTED_EDGE('',*,*,#187739,.T.); +#187739 = EDGE_CURVE('',#187731,#187740,#187742,.T.); +#187740 = VERTEX_POINT('',#187741); +#187741 = CARTESIAN_POINT('',(185.04894,-88.961938,1.585)); +#187742 = LINE('',#187743,#187744); +#187743 = CARTESIAN_POINT('',(186.69186,-88.961938,1.585)); +#187744 = VECTOR('',#187745,1.); +#187745 = DIRECTION('',(-1.,0.,0.)); +#187746 = ORIENTED_EDGE('',*,*,#187747,.T.); +#187747 = EDGE_CURVE('',#187740,#187748,#187750,.T.); +#187748 = VERTEX_POINT('',#187749); +#187749 = CARTESIAN_POINT('',(185.015825,-88.758545,1.585)); +#187750 = CIRCLE('',#187751,0.109999974265); +#187751 = AXIS2_PLACEMENT_3D('',#187752,#187753,#187754); +#187752 = CARTESIAN_POINT('',(185.07040028505,-88.85405171494,1.585)); +#187753 = DIRECTION('',(0.,0.,-1.)); +#187754 = DIRECTION('',(-0.195093546165,-0.980784639075,-0.)); +#187755 = ORIENTED_EDGE('',*,*,#187756,.T.); +#187756 = EDGE_CURVE('',#187748,#187757,#187759,.T.); +#187757 = VERTEX_POINT('',#187758); +#187758 = CARTESIAN_POINT('',(186.256188,-88.049766,1.585)); +#187759 = LINE('',#187760,#187761); +#187760 = CARTESIAN_POINT('',(185.015825,-88.758545,1.585)); +#187761 = VECTOR('',#187762,1.); +#187762 = DIRECTION('',(0.868243099048,0.49613901374,0.)); +#187763 = ORIENTED_EDGE('',*,*,#187764,.T.); +#187764 = EDGE_CURVE('',#187757,#187663,#187765,.T.); +#187765 = LINE('',#187766,#187767); +#187766 = CARTESIAN_POINT('',(186.256188,-88.049766,1.585)); +#187767 = VECTOR('',#187768,1.); +#187768 = DIRECTION('',(-0.999998466845,1.751087397881E-03,0.)); +#187769 = PLANE('',#187770); +#187770 = AXIS2_PLACEMENT_3D('',#187771,#187772,#187773); +#187771 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187772 = DIRECTION('',(0.,0.,1.)); +#187773 = DIRECTION('',(1.,0.,-0.)); +#187774 = SHELL_BASED_SURFACE_MODEL('',(#187775)); +#187775 = OPEN_SHELL('',(#187776)); +#187776 = ADVANCED_FACE('',(#187777),#187813,.T.); +#187777 = FACE_BOUND('',#187778,.F.); +#187778 = EDGE_LOOP('',(#187779,#187790,#187798,#187807)); +#187779 = ORIENTED_EDGE('',*,*,#187780,.T.); +#187780 = EDGE_CURVE('',#187781,#187783,#187785,.T.); +#187781 = VERTEX_POINT('',#187782); +#187782 = CARTESIAN_POINT('',(172.207142,-88.93174,1.585)); +#187783 = VERTEX_POINT('',#187784); +#187784 = CARTESIAN_POINT('',(172.207142,-88.80174,1.585)); +#187785 = CIRCLE('',#187786,6.500000000092E-02); +#187786 = AXIS2_PLACEMENT_3D('',#187787,#187788,#187789); +#187787 = CARTESIAN_POINT('',(172.20714234486,-88.86674,1.585)); +#187788 = DIRECTION('',(0.,0.,-1.)); +#187789 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#187790 = ORIENTED_EDGE('',*,*,#187791,.T.); +#187791 = EDGE_CURVE('',#187783,#187792,#187794,.T.); +#187792 = VERTEX_POINT('',#187793); +#187793 = CARTESIAN_POINT('',(172.892857,-88.80174,1.585)); +#187794 = LINE('',#187795,#187796); +#187795 = CARTESIAN_POINT('',(172.207142,-88.80174,1.585)); +#187796 = VECTOR('',#187797,1.); +#187797 = DIRECTION('',(1.,0.,0.)); +#187798 = ORIENTED_EDGE('',*,*,#187799,.T.); +#187799 = EDGE_CURVE('',#187792,#187800,#187802,.T.); +#187800 = VERTEX_POINT('',#187801); +#187801 = CARTESIAN_POINT('',(172.892857,-88.93174,1.585)); +#187802 = CIRCLE('',#187803,6.500000000092E-02); +#187803 = AXIS2_PLACEMENT_3D('',#187804,#187805,#187806); +#187804 = CARTESIAN_POINT('',(172.89285665513,-88.86674,1.585)); +#187805 = DIRECTION('',(0.,0.,-1.)); +#187806 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#187807 = ORIENTED_EDGE('',*,*,#187808,.T.); +#187808 = EDGE_CURVE('',#187800,#187781,#187809,.T.); +#187809 = LINE('',#187810,#187811); +#187810 = CARTESIAN_POINT('',(172.892857,-88.93174,1.585)); +#187811 = VECTOR('',#187812,1.); +#187812 = DIRECTION('',(-1.,0.,0.)); +#187813 = PLANE('',#187814); +#187814 = AXIS2_PLACEMENT_3D('',#187815,#187816,#187817); +#187815 = CARTESIAN_POINT('',(0.,0.,1.585)); +#187816 = DIRECTION('',(0.,0.,1.)); +#187817 = DIRECTION('',(1.,0.,-0.)); +#187818 = SHELL_BASED_SURFACE_MODEL('',(#187819)); +#187819 = OPEN_SHELL('',(#187820)); +#187820 = ADVANCED_FACE('',(#187821,#188017,#188084),#188136,.T.); +#187821 = FACE_BOUND('',#187822,.F.); +#187822 = EDGE_LOOP('',(#187823,#187834,#187842,#187851,#187859,#187867, + #187875,#187883,#187891,#187899,#187907,#187915,#187923,#187931, + #187939,#187947,#187955,#187963,#187971,#187979,#187987,#187995, + #188003,#188011)); +#187823 = ORIENTED_EDGE('',*,*,#187824,.T.); +#187824 = EDGE_CURVE('',#187825,#187827,#187829,.T.); +#187825 = VERTEX_POINT('',#187826); +#187826 = CARTESIAN_POINT('',(82.565672,-87.049308,1.585)); +#187827 = VERTEX_POINT('',#187828); +#187828 = CARTESIAN_POINT('',(82.683526,-86.931454,1.585)); +#187829 = CIRCLE('',#187830,0.150002525551); +#187830 = AXIS2_PLACEMENT_3D('',#187831,#187832,#187833); +#187831 = CARTESIAN_POINT('',(82.712791899413,-87.07857389941,1.585)); +#187832 = DIRECTION('',(0.,0.,-1.)); +#187833 = DIRECTION('',(-0.980782815972,0.19510271114,0.)); +#187834 = ORIENTED_EDGE('',*,*,#187835,.T.); +#187835 = EDGE_CURVE('',#187827,#187836,#187838,.T.); +#187836 = VERTEX_POINT('',#187837); +#187837 = CARTESIAN_POINT('',(85.342054,-86.931454,1.585)); +#187838 = LINE('',#187839,#187840); +#187839 = CARTESIAN_POINT('',(82.683526,-86.931454,1.585)); +#187840 = VECTOR('',#187841,1.); +#187841 = DIRECTION('',(1.,0.,0.)); +#187842 = ORIENTED_EDGE('',*,*,#187843,.T.); +#187843 = EDGE_CURVE('',#187836,#187844,#187846,.T.); +#187844 = VERTEX_POINT('',#187845); +#187845 = CARTESIAN_POINT('',(85.459908,-87.049308,1.585)); +#187846 = CIRCLE('',#187847,0.150002525551); +#187847 = AXIS2_PLACEMENT_3D('',#187848,#187849,#187850); +#187848 = CARTESIAN_POINT('',(85.312788100587,-87.07857389941,1.585)); +#187849 = DIRECTION('',(0.,0.,-1.)); +#187850 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#187851 = ORIENTED_EDGE('',*,*,#187852,.T.); +#187852 = EDGE_CURVE('',#187844,#187853,#187855,.T.); +#187853 = VERTEX_POINT('',#187854); +#187854 = CARTESIAN_POINT('',(85.459908,-87.974503,1.585)); +#187855 = LINE('',#187856,#187857); +#187856 = CARTESIAN_POINT('',(85.459908,-87.049308,1.585)); +#187857 = VECTOR('',#187858,1.); +#187858 = DIRECTION('',(0.,-1.,0.)); +#187859 = ORIENTED_EDGE('',*,*,#187860,.T.); +#187860 = EDGE_CURVE('',#187853,#187861,#187863,.T.); +#187861 = VERTEX_POINT('',#187862); +#187862 = CARTESIAN_POINT('',(85.446954,-88.012321,1.585)); +#187863 = LINE('',#187864,#187865); +#187864 = CARTESIAN_POINT('',(85.459908,-87.974503,1.585)); +#187865 = VECTOR('',#187866,1.); +#187866 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#187867 = ORIENTED_EDGE('',*,*,#187868,.T.); +#187868 = EDGE_CURVE('',#187861,#187869,#187871,.T.); +#187869 = VERTEX_POINT('',#187870); +#187870 = CARTESIAN_POINT('',(85.307479,-88.284826,1.585)); +#187871 = LINE('',#187872,#187873); +#187872 = CARTESIAN_POINT('',(85.446954,-88.012321,1.585)); +#187873 = VECTOR('',#187874,1.); +#187874 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#187875 = ORIENTED_EDGE('',*,*,#187876,.T.); +#187876 = EDGE_CURVE('',#187869,#187877,#187879,.T.); +#187877 = VERTEX_POINT('',#187878); +#187878 = CARTESIAN_POINT('',(85.148506,-88.441388,1.585)); +#187879 = LINE('',#187880,#187881); +#187880 = CARTESIAN_POINT('',(85.307479,-88.284826,1.585)); +#187881 = VECTOR('',#187882,1.); +#187882 = DIRECTION('',(-0.712488978586,-0.70168330135,0.)); +#187883 = ORIENTED_EDGE('',*,*,#187884,.T.); +#187884 = EDGE_CURVE('',#187877,#187885,#187887,.T.); +#187885 = VERTEX_POINT('',#187886); +#187886 = CARTESIAN_POINT('',(84.857171,-88.585151,1.585)); +#187887 = LINE('',#187888,#187889); +#187888 = CARTESIAN_POINT('',(85.148506,-88.441388,1.585)); +#187889 = VECTOR('',#187890,1.); +#187890 = DIRECTION('',(-0.896759796352,-0.442517646706,0.)); +#187891 = ORIENTED_EDGE('',*,*,#187892,.T.); +#187892 = EDGE_CURVE('',#187885,#187893,#187895,.T.); +#187893 = VERTEX_POINT('',#187894); +#187894 = CARTESIAN_POINT('',(84.817552,-88.590477,1.585)); +#187895 = LINE('',#187896,#187897); +#187896 = CARTESIAN_POINT('',(84.857171,-88.585151,1.585)); +#187897 = VECTOR('',#187898,1.); +#187898 = DIRECTION('',(-0.991084879219,-0.133231986338,0.)); +#187899 = ORIENTED_EDGE('',*,*,#187900,.T.); +#187900 = EDGE_CURVE('',#187893,#187901,#187903,.T.); +#187901 = VERTEX_POINT('',#187902); +#187902 = CARTESIAN_POINT('',(84.540669,-88.587595,1.585)); +#187903 = LINE('',#187904,#187905); +#187904 = CARTESIAN_POINT('',(84.817552,-88.590477,1.585)); +#187905 = VECTOR('',#187906,1.); +#187906 = DIRECTION('',(-0.999945833586,1.04081647931E-02,0.)); +#187907 = ORIENTED_EDGE('',*,*,#187908,.T.); +#187908 = EDGE_CURVE('',#187901,#187909,#187911,.T.); +#187909 = VERTEX_POINT('',#187910); +#187910 = CARTESIAN_POINT('',(84.502851,-88.574641,1.585)); +#187911 = LINE('',#187912,#187913); +#187912 = CARTESIAN_POINT('',(84.540669,-88.587595,1.585)); +#187913 = VECTOR('',#187914,1.); +#187914 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#187915 = ORIENTED_EDGE('',*,*,#187916,.T.); +#187916 = EDGE_CURVE('',#187909,#187917,#187919,.T.); +#187917 = VERTEX_POINT('',#187918); +#187918 = CARTESIAN_POINT('',(84.230346,-88.435166,1.585)); +#187919 = LINE('',#187920,#187921); +#187920 = CARTESIAN_POINT('',(84.502851,-88.574641,1.585)); +#187921 = VECTOR('',#187922,1.); +#187922 = DIRECTION('',(-0.890176840372,0.455615180679,0.)); +#187923 = ORIENTED_EDGE('',*,*,#187924,.T.); +#187924 = EDGE_CURVE('',#187917,#187925,#187927,.T.); +#187925 = VERTEX_POINT('',#187926); +#187926 = CARTESIAN_POINT('',(84.109294,-88.31578,1.585)); +#187927 = LINE('',#187928,#187929); +#187928 = CARTESIAN_POINT('',(84.230346,-88.435166,1.585)); +#187929 = VECTOR('',#187930,1.); +#187930 = DIRECTION('',(-0.711989247494,0.702190366961,0.)); +#187931 = ORIENTED_EDGE('',*,*,#187932,.T.); +#187932 = EDGE_CURVE('',#187925,#187933,#187935,.T.); +#187933 = VERTEX_POINT('',#187934); +#187934 = CARTESIAN_POINT('',(84.075606,-88.400002,1.585)); +#187935 = LINE('',#187936,#187937); +#187936 = CARTESIAN_POINT('',(84.109294,-88.31578,1.585)); +#187937 = VECTOR('',#187938,1.); +#187938 = DIRECTION('',(-0.371383073449,-0.928479732011,0.)); +#187939 = ORIENTED_EDGE('',*,*,#187940,.T.); +#187940 = EDGE_CURVE('',#187933,#187941,#187943,.T.); +#187941 = VERTEX_POINT('',#187942); +#187942 = CARTESIAN_POINT('',(83.910412,-88.565198,1.585)); +#187943 = LINE('',#187944,#187945); +#187944 = CARTESIAN_POINT('',(84.075606,-88.400002,1.585)); +#187945 = VECTOR('',#187946,1.); +#187946 = DIRECTION('',(-0.707102500737,-0.707111061611,0.)); +#187947 = ORIENTED_EDGE('',*,*,#187948,.T.); +#187948 = EDGE_CURVE('',#187941,#187949,#187951,.T.); +#187949 = VERTEX_POINT('',#187950); +#187950 = CARTESIAN_POINT('',(83.619075,-88.70896,1.585)); +#187951 = LINE('',#187952,#187953); +#187952 = CARTESIAN_POINT('',(83.910412,-88.565198,1.585)); +#187953 = VECTOR('',#187954,1.); +#187954 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#187955 = ORIENTED_EDGE('',*,*,#187956,.T.); +#187956 = EDGE_CURVE('',#187949,#187957,#187959,.T.); +#187957 = VERTEX_POINT('',#187958); +#187958 = CARTESIAN_POINT('',(83.579457,-88.714286,1.585)); +#187959 = LINE('',#187960,#187961); +#187960 = CARTESIAN_POINT('',(83.619075,-88.70896,1.585)); +#187961 = VECTOR('',#187962,1.); +#187962 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#187963 = ORIENTED_EDGE('',*,*,#187964,.T.); +#187964 = EDGE_CURVE('',#187957,#187965,#187967,.T.); +#187965 = VERTEX_POINT('',#187966); +#187966 = CARTESIAN_POINT('',(83.178764,-88.711404,1.585)); +#187967 = LINE('',#187968,#187969); +#187968 = CARTESIAN_POINT('',(83.579457,-88.714286,1.585)); +#187969 = VECTOR('',#187970,1.); +#187970 = DIRECTION('',(-0.999974134695,7.192352889099E-03,0.)); +#187971 = ORIENTED_EDGE('',*,*,#187972,.T.); +#187972 = EDGE_CURVE('',#187965,#187973,#187975,.T.); +#187973 = VERTEX_POINT('',#187974); +#187974 = CARTESIAN_POINT('',(83.140946,-88.69845,1.585)); +#187975 = LINE('',#187976,#187977); +#187976 = CARTESIAN_POINT('',(83.178764,-88.711404,1.585)); +#187977 = VECTOR('',#187978,1.); +#187978 = DIRECTION('',(-0.946039317712,0.32405186212,0.)); +#187979 = ORIENTED_EDGE('',*,*,#187980,.T.); +#187980 = EDGE_CURVE('',#187973,#187981,#187983,.T.); +#187981 = VERTEX_POINT('',#187982); +#187982 = CARTESIAN_POINT('',(82.868442,-88.558976,1.585)); +#187983 = LINE('',#187984,#187985); +#187984 = CARTESIAN_POINT('',(83.140946,-88.69845,1.585)); +#187985 = VECTOR('',#187986,1.); +#187986 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#187987 = ORIENTED_EDGE('',*,*,#187988,.T.); +#187988 = EDGE_CURVE('',#187981,#187989,#187991,.T.); +#187989 = VERTEX_POINT('',#187990); +#187990 = CARTESIAN_POINT('',(82.711879,-88.400002,1.585)); +#187991 = LINE('',#187992,#187993); +#187992 = CARTESIAN_POINT('',(82.868442,-88.558976,1.585)); +#187993 = VECTOR('',#187994,1.); +#187994 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#187995 = ORIENTED_EDGE('',*,*,#187996,.T.); +#187996 = EDGE_CURVE('',#187989,#187997,#187999,.T.); +#187997 = VERTEX_POINT('',#187998); +#187998 = CARTESIAN_POINT('',(82.568116,-88.108667,1.585)); +#187999 = LINE('',#188000,#188001); +#188000 = CARTESIAN_POINT('',(82.711879,-88.400002,1.585)); +#188001 = VECTOR('',#188002,1.); +#188002 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#188003 = ORIENTED_EDGE('',*,*,#188004,.T.); +#188004 = EDGE_CURVE('',#187997,#188005,#188007,.T.); +#188005 = VERTEX_POINT('',#188006); +#188006 = CARTESIAN_POINT('',(82.56279,-88.069048,1.585)); +#188007 = LINE('',#188008,#188009); +#188008 = CARTESIAN_POINT('',(82.568116,-88.108667,1.585)); +#188009 = VECTOR('',#188010,1.); +#188010 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#188011 = ORIENTED_EDGE('',*,*,#188012,.T.); +#188012 = EDGE_CURVE('',#188005,#187825,#188013,.T.); +#188013 = LINE('',#188014,#188015); +#188014 = CARTESIAN_POINT('',(82.56279,-88.069048,1.585)); +#188015 = VECTOR('',#188016,1.); +#188016 = DIRECTION('',(2.826199315639E-03,0.999996006291,0.)); +#188017 = FACE_BOUND('',#188018,.F.); +#188018 = EDGE_LOOP('',(#188019,#188029,#188037,#188045,#188054,#188062, + #188070,#188078)); +#188019 = ORIENTED_EDGE('',*,*,#188020,.T.); +#188020 = EDGE_CURVE('',#188021,#188023,#188025,.T.); +#188021 = VERTEX_POINT('',#188022); +#188022 = CARTESIAN_POINT('',(83.924695,-87.920897,1.585)); +#188023 = VERTEX_POINT('',#188024); +#188024 = CARTESIAN_POINT('',(83.924695,-87.228572,1.585)); +#188025 = LINE('',#188026,#188027); +#188026 = CARTESIAN_POINT('',(83.924695,-87.920897,1.585)); +#188027 = VECTOR('',#188028,1.); +#188028 = DIRECTION('',(0.,1.,0.)); +#188029 = ORIENTED_EDGE('',*,*,#188030,.T.); +#188030 = EDGE_CURVE('',#188023,#188031,#188033,.T.); +#188031 = VERTEX_POINT('',#188032); +#188032 = CARTESIAN_POINT('',(82.86279,-87.228572,1.585)); +#188033 = LINE('',#188034,#188035); +#188034 = CARTESIAN_POINT('',(83.924695,-87.228572,1.585)); +#188035 = VECTOR('',#188036,1.); +#188036 = DIRECTION('',(-1.,0.,0.)); +#188037 = ORIENTED_EDGE('',*,*,#188038,.T.); +#188038 = EDGE_CURVE('',#188031,#188039,#188041,.T.); +#188039 = VERTEX_POINT('',#188040); +#188040 = CARTESIAN_POINT('',(82.86279,-88.033637,1.585)); +#188041 = LINE('',#188042,#188043); +#188042 = CARTESIAN_POINT('',(82.86279,-87.228572,1.585)); +#188043 = VECTOR('',#188044,1.); +#188044 = DIRECTION('',(0.,-1.,0.)); +#188045 = ORIENTED_EDGE('',*,*,#188046,.T.); +#188046 = EDGE_CURVE('',#188039,#188047,#188049,.T.); +#188047 = VERTEX_POINT('',#188048); +#188048 = CARTESIAN_POINT('',(83.243438,-88.414286,1.585)); +#188049 = CIRCLE('',#188050,0.536608239522); +#188050 = AXIS2_PLACEMENT_3D('',#188051,#188052,#188053); +#188051 = CARTESIAN_POINT('',(83.381368724711,-87.89570763764,1.585)); +#188052 = DIRECTION('',(0.,0.,1.)); +#188053 = DIRECTION('',(-0.966400972846,-0.25703921818,0.)); +#188054 = ORIENTED_EDGE('',*,*,#188055,.T.); +#188055 = EDGE_CURVE('',#188047,#188056,#188058,.T.); +#188056 = VERTEX_POINT('',#188057); +#188057 = CARTESIAN_POINT('',(83.544047,-88.414286,1.585)); +#188058 = LINE('',#188059,#188060); +#188059 = CARTESIAN_POINT('',(83.243438,-88.414286,1.585)); +#188060 = VECTOR('',#188061,1.); +#188061 = DIRECTION('',(1.,0.,0.)); +#188062 = ORIENTED_EDGE('',*,*,#188063,.T.); +#188063 = EDGE_CURVE('',#188056,#188064,#188066,.T.); +#188064 = VERTEX_POINT('',#188065); +#188065 = CARTESIAN_POINT('',(83.738221,-88.317199,1.585)); +#188066 = LINE('',#188067,#188068); +#188067 = CARTESIAN_POINT('',(83.544047,-88.414286,1.585)); +#188068 = VECTOR('',#188069,1.); +#188069 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#188070 = ORIENTED_EDGE('',*,*,#188071,.T.); +#188071 = EDGE_CURVE('',#188064,#188072,#188074,.T.); +#188072 = VERTEX_POINT('',#188073); +#188073 = CARTESIAN_POINT('',(83.81978,-88.235639,1.585)); +#188074 = LINE('',#188075,#188076); +#188075 = CARTESIAN_POINT('',(83.738221,-88.317199,1.585)); +#188076 = VECTOR('',#188077,1.); +#188077 = DIRECTION('',(0.70710244626,0.707111116087,0.)); +#188078 = ORIENTED_EDGE('',*,*,#188079,.T.); +#188079 = EDGE_CURVE('',#188072,#188021,#188080,.T.); +#188080 = LINE('',#188081,#188082); +#188081 = CARTESIAN_POINT('',(83.81978,-88.235639,1.585)); +#188082 = VECTOR('',#188083,1.); +#188083 = DIRECTION('',(0.316230478759,0.948682393799,0.)); +#188084 = FACE_BOUND('',#188085,.F.); +#188085 = EDGE_LOOP('',(#188086,#188097,#188105,#188113,#188121,#188130) + ); +#188086 = ORIENTED_EDGE('',*,*,#188087,.T.); +#188087 = EDGE_CURVE('',#188088,#188090,#188092,.T.); +#188088 = VERTEX_POINT('',#188089); +#188089 = CARTESIAN_POINT('',(84.782142,-88.290477,1.585)); +#188090 = VERTEX_POINT('',#188091); +#188091 = CARTESIAN_POINT('',(85.16279,-87.909828,1.585)); +#188092 = CIRCLE('',#188093,0.53661283273); +#188093 = AXIS2_PLACEMENT_3D('',#188094,#188095,#188096); +#188094 = CARTESIAN_POINT('',(84.644207520954,-87.77189488331,1.585)); +#188095 = DIRECTION('',(0.,0.,1.)); +#188096 = DIRECTION('',(0.257046553181,-0.966399021884,0.)); +#188097 = ORIENTED_EDGE('',*,*,#188098,.T.); +#188098 = EDGE_CURVE('',#188090,#188099,#188101,.T.); +#188099 = VERTEX_POINT('',#188100); +#188100 = CARTESIAN_POINT('',(85.16279,-87.228572,1.585)); +#188101 = LINE('',#188102,#188103); +#188102 = CARTESIAN_POINT('',(85.16279,-87.909828,1.585)); +#188103 = VECTOR('',#188104,1.); +#188104 = DIRECTION('',(0.,1.,0.)); +#188105 = ORIENTED_EDGE('',*,*,#188106,.T.); +#188106 = EDGE_CURVE('',#188099,#188107,#188109,.T.); +#188107 = VERTEX_POINT('',#188108); +#188108 = CARTESIAN_POINT('',(84.224695,-87.228572,1.585)); +#188109 = LINE('',#188110,#188111); +#188110 = CARTESIAN_POINT('',(85.16279,-87.228572,1.585)); +#188111 = VECTOR('',#188112,1.); +#188112 = DIRECTION('',(-1.,0.,0.)); +#188113 = ORIENTED_EDGE('',*,*,#188114,.T.); +#188114 = EDGE_CURVE('',#188107,#188115,#188117,.T.); +#188115 = VERTEX_POINT('',#188116); +#188116 = CARTESIAN_POINT('',(84.224695,-87.909829,1.585)); +#188117 = LINE('',#188118,#188119); +#188118 = CARTESIAN_POINT('',(84.224695,-87.228572,1.585)); +#188119 = VECTOR('',#188120,1.); +#188120 = DIRECTION('',(0.,-1.,0.)); +#188121 = ORIENTED_EDGE('',*,*,#188122,.T.); +#188122 = EDGE_CURVE('',#188115,#188123,#188125,.T.); +#188123 = VERTEX_POINT('',#188124); +#188124 = CARTESIAN_POINT('',(84.605344,-88.290477,1.585)); +#188125 = CIRCLE('',#188126,0.536602209951); +#188126 = AXIS2_PLACEMENT_3D('',#188127,#188128,#188129); +#188127 = CARTESIAN_POINT('',(84.743268433983,-87.77190320367,1.585)); +#188128 = DIRECTION('',(0.,0.,1.)); +#188129 = DIRECTION('',(-0.966401972198,-0.257035460845,0.)); +#188130 = ORIENTED_EDGE('',*,*,#188131,.T.); +#188131 = EDGE_CURVE('',#188123,#188088,#188132,.T.); +#188132 = LINE('',#188133,#188134); +#188133 = CARTESIAN_POINT('',(84.605344,-88.290477,1.585)); +#188134 = VECTOR('',#188135,1.); +#188135 = DIRECTION('',(1.,0.,0.)); +#188136 = PLANE('',#188137); +#188137 = AXIS2_PLACEMENT_3D('',#188138,#188139,#188140); +#188138 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188139 = DIRECTION('',(0.,0.,1.)); +#188140 = DIRECTION('',(1.,0.,-0.)); +#188141 = SHELL_BASED_SURFACE_MODEL('',(#188142)); +#188142 = OPEN_SHELL('',(#188143)); +#188143 = ADVANCED_FACE('',(#188144,#188155),#188166,.T.); +#188144 = FACE_BOUND('',#188145,.T.); +#188145 = EDGE_LOOP('',(#188146)); +#188146 = ORIENTED_EDGE('',*,*,#188147,.T.); +#188147 = EDGE_CURVE('',#188148,#188148,#188150,.T.); +#188148 = VERTEX_POINT('',#188149); +#188149 = CARTESIAN_POINT('',(128.70165,-87.3231,1.585)); +#188150 = CIRCLE('',#188151,1.01); +#188151 = AXIS2_PLACEMENT_3D('',#188152,#188153,#188154); +#188152 = CARTESIAN_POINT('',(127.69165,-87.3231,1.585)); +#188153 = DIRECTION('',(0.,0.,1.)); +#188154 = DIRECTION('',(1.,0.,-0.)); +#188155 = FACE_BOUND('',#188156,.F.); +#188156 = EDGE_LOOP('',(#188157)); +#188157 = ORIENTED_EDGE('',*,*,#188158,.T.); +#188158 = EDGE_CURVE('',#188159,#188159,#188161,.T.); +#188159 = VERTEX_POINT('',#188160); +#188160 = CARTESIAN_POINT('',(128.585955,-87.3231,1.585)); +#188161 = CIRCLE('',#188162,0.894305); +#188162 = AXIS2_PLACEMENT_3D('',#188163,#188164,#188165); +#188163 = CARTESIAN_POINT('',(127.69165,-87.3231,1.585)); +#188164 = DIRECTION('',(0.,0.,1.)); +#188165 = DIRECTION('',(1.,0.,-0.)); +#188166 = PLANE('',#188167); +#188167 = AXIS2_PLACEMENT_3D('',#188168,#188169,#188170); +#188168 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188169 = DIRECTION('',(0.,0.,1.)); +#188170 = DIRECTION('',(1.,0.,-0.)); +#188171 = SHELL_BASED_SURFACE_MODEL('',(#188172)); +#188172 = OPEN_SHELL('',(#188173)); +#188173 = ADVANCED_FACE('',(#188174),#188259,.T.); +#188174 = FACE_BOUND('',#188175,.F.); +#188175 = EDGE_LOOP('',(#188176,#188187,#188195,#188203,#188212,#188220, + #188228,#188237,#188245,#188253)); +#188176 = ORIENTED_EDGE('',*,*,#188177,.T.); +#188177 = EDGE_CURVE('',#188178,#188180,#188182,.T.); +#188178 = VERTEX_POINT('',#188179); +#188179 = CARTESIAN_POINT('',(185.009287,-86.400686,1.585)); +#188180 = VERTEX_POINT('',#188181); +#188181 = CARTESIAN_POINT('',(185.178286,-86.470688,1.585)); +#188182 = CIRCLE('',#188183,0.109999394362); +#188183 = AXIS2_PLACEMENT_3D('',#188184,#188185,#188186); +#188184 = CARTESIAN_POINT('',(185.0704,-86.49214674562,1.585)); +#188185 = DIRECTION('',(0.,0.,-1.)); +#188186 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#188187 = ORIENTED_EDGE('',*,*,#188188,.T.); +#188188 = EDGE_CURVE('',#188180,#188189,#188191,.T.); +#188189 = VERTEX_POINT('',#188190); +#188190 = CARTESIAN_POINT('',(185.1804,-86.839291,1.585)); +#188191 = LINE('',#188192,#188193); +#188192 = CARTESIAN_POINT('',(185.178286,-86.470688,1.585)); +#188193 = VECTOR('',#188194,1.); +#188194 = DIRECTION('',(5.735073327767E-03,-0.999983554332,0.)); +#188195 = ORIENTED_EDGE('',*,*,#188196,.T.); +#188196 = EDGE_CURVE('',#188189,#188197,#188199,.T.); +#188197 = VERTEX_POINT('',#188198); +#188198 = CARTESIAN_POINT('',(186.69186,-86.841405,1.585)); +#188199 = LINE('',#188200,#188201); +#188200 = CARTESIAN_POINT('',(185.1804,-86.839291,1.585)); +#188201 = VECTOR('',#188202,1.); +#188202 = DIRECTION('',(0.999999021894,-1.39864629714E-03,0.)); +#188203 = ORIENTED_EDGE('',*,*,#188204,.T.); +#188204 = EDGE_CURVE('',#188197,#188205,#188207,.T.); +#188205 = VERTEX_POINT('',#188206); +#188206 = CARTESIAN_POINT('',(186.69186,-87.057177,1.585)); +#188207 = CIRCLE('',#188208,0.109999639072); +#188208 = AXIS2_PLACEMENT_3D('',#188209,#188210,#188211); +#188209 = CARTESIAN_POINT('',(186.6704,-86.949291,1.585)); +#188210 = DIRECTION('',(0.,0.,-1.)); +#188211 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#188212 = ORIENTED_EDGE('',*,*,#188213,.T.); +#188213 = EDGE_CURVE('',#188205,#188214,#188216,.T.); +#188214 = VERTEX_POINT('',#188215); +#188215 = CARTESIAN_POINT('',(185.1804,-87.059291,1.585)); +#188216 = LINE('',#188217,#188218); +#188217 = CARTESIAN_POINT('',(186.69186,-87.057177,1.585)); +#188218 = VECTOR('',#188219,1.); +#188219 = DIRECTION('',(-0.999999021894,-1.398646297149E-03,0.)); +#188220 = ORIENTED_EDGE('',*,*,#188221,.T.); +#188221 = EDGE_CURVE('',#188214,#188222,#188224,.T.); +#188222 = VERTEX_POINT('',#188223); +#188223 = CARTESIAN_POINT('',(185.178286,-87.427894,1.585)); +#188224 = LINE('',#188225,#188226); +#188225 = CARTESIAN_POINT('',(185.1804,-87.059291,1.585)); +#188226 = VECTOR('',#188227,1.); +#188227 = DIRECTION('',(-5.735073327767E-03,-0.999983554332,0.)); +#188228 = ORIENTED_EDGE('',*,*,#188229,.T.); +#188229 = EDGE_CURVE('',#188222,#188230,#188232,.T.); +#188230 = VERTEX_POINT('',#188231); +#188231 = CARTESIAN_POINT('',(184.962514,-87.427894,1.585)); +#188232 = CIRCLE('',#188233,0.109999639072); +#188233 = AXIS2_PLACEMENT_3D('',#188234,#188235,#188236); +#188234 = CARTESIAN_POINT('',(185.0704,-87.406434,1.585)); +#188235 = DIRECTION('',(-0.,0.,-1.)); +#188236 = DIRECTION('',(0.980785036297,-0.195091549218,-0.)); +#188237 = ORIENTED_EDGE('',*,*,#188238,.T.); +#188238 = EDGE_CURVE('',#188230,#188239,#188241,.T.); +#188239 = VERTEX_POINT('',#188240); +#188240 = CARTESIAN_POINT('',(184.962514,-86.470688,1.585)); +#188241 = LINE('',#188242,#188243); +#188242 = CARTESIAN_POINT('',(184.962514,-87.427894,1.585)); +#188243 = VECTOR('',#188244,1.); +#188244 = DIRECTION('',(0.,1.,0.)); +#188245 = ORIENTED_EDGE('',*,*,#188246,.T.); +#188246 = EDGE_CURVE('',#188239,#188247,#188249,.T.); +#188247 = VERTEX_POINT('',#188248); +#188248 = CARTESIAN_POINT('',(184.978938,-86.431035,1.585)); +#188249 = LINE('',#188250,#188251); +#188250 = CARTESIAN_POINT('',(184.962514,-86.470688,1.585)); +#188251 = VECTOR('',#188252,1.); +#188252 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#188253 = ORIENTED_EDGE('',*,*,#188254,.T.); +#188254 = EDGE_CURVE('',#188247,#188178,#188255,.T.); +#188255 = LINE('',#188256,#188257); +#188256 = CARTESIAN_POINT('',(184.978938,-86.431035,1.585)); +#188257 = VECTOR('',#188258,1.); +#188258 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#188259 = PLANE('',#188260); +#188260 = AXIS2_PLACEMENT_3D('',#188261,#188262,#188263); +#188261 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188262 = DIRECTION('',(0.,0.,1.)); +#188263 = DIRECTION('',(1.,0.,-0.)); +#188264 = SHELL_BASED_SURFACE_MODEL('',(#188265)); +#188265 = OPEN_SHELL('',(#188266)); +#188266 = ADVANCED_FACE('',(#188267),#188303,.T.); +#188267 = FACE_BOUND('',#188268,.F.); +#188268 = EDGE_LOOP('',(#188269,#188280,#188288,#188297)); +#188269 = ORIENTED_EDGE('',*,*,#188270,.T.); +#188270 = EDGE_CURVE('',#188271,#188273,#188275,.T.); +#188271 = VERTEX_POINT('',#188272); +#188272 = CARTESIAN_POINT('',(99.464586,-87.4731,1.585)); +#188273 = VERTEX_POINT('',#188274); +#188274 = CARTESIAN_POINT('',(99.464586,-87.3531,1.585)); +#188275 = CIRCLE('',#188276,6.000000000043E-02); +#188276 = AXIS2_PLACEMENT_3D('',#188277,#188278,#188279); +#188277 = CARTESIAN_POINT('',(99.464585774412,-87.4131,1.585)); +#188278 = DIRECTION('',(0.,0.,-1.)); +#188279 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#188280 = ORIENTED_EDGE('',*,*,#188281,.T.); +#188281 = EDGE_CURVE('',#188273,#188282,#188284,.T.); +#188282 = VERTEX_POINT('',#188283); +#188283 = CARTESIAN_POINT('',(100.918714,-87.3531,1.585)); +#188284 = LINE('',#188285,#188286); +#188285 = CARTESIAN_POINT('',(99.464586,-87.3531,1.585)); +#188286 = VECTOR('',#188287,1.); +#188287 = DIRECTION('',(1.,0.,0.)); +#188288 = ORIENTED_EDGE('',*,*,#188289,.T.); +#188289 = EDGE_CURVE('',#188282,#188290,#188292,.T.); +#188290 = VERTEX_POINT('',#188291); +#188291 = CARTESIAN_POINT('',(100.918714,-87.4731,1.585)); +#188292 = CIRCLE('',#188293,6.000000000043E-02); +#188293 = AXIS2_PLACEMENT_3D('',#188294,#188295,#188296); +#188294 = CARTESIAN_POINT('',(100.91871422558,-87.4131,1.585)); +#188295 = DIRECTION('',(0.,0.,-1.)); +#188296 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#188297 = ORIENTED_EDGE('',*,*,#188298,.T.); +#188298 = EDGE_CURVE('',#188290,#188271,#188299,.T.); +#188299 = LINE('',#188300,#188301); +#188300 = CARTESIAN_POINT('',(100.918714,-87.4731,1.585)); +#188301 = VECTOR('',#188302,1.); +#188302 = DIRECTION('',(-1.,0.,0.)); +#188303 = PLANE('',#188304); +#188304 = AXIS2_PLACEMENT_3D('',#188305,#188306,#188307); +#188305 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188306 = DIRECTION('',(0.,0.,1.)); +#188307 = DIRECTION('',(1.,0.,-0.)); +#188308 = SHELL_BASED_SURFACE_MODEL('',(#188309)); +#188309 = OPEN_SHELL('',(#188310)); +#188310 = ADVANCED_FACE('',(#188311,#188437,#188504),#188556,.T.); +#188311 = FACE_BOUND('',#188312,.F.); +#188312 = EDGE_LOOP('',(#188313,#188324,#188332,#188340,#188348,#188356, + #188365,#188373,#188381,#188390,#188398,#188406,#188414,#188422, + #188431)); +#188313 = ORIENTED_EDGE('',*,*,#188314,.T.); +#188314 = EDGE_CURVE('',#188315,#188317,#188319,.T.); +#188315 = VERTEX_POINT('',#188316); +#188316 = CARTESIAN_POINT('',(170.992142,-86.409597,1.585)); +#188317 = VERTEX_POINT('',#188318); +#188318 = CARTESIAN_POINT('',(171.057142,-86.344597,1.585)); +#188319 = CIRCLE('',#188320,6.500103935384E-02); +#188320 = AXIS2_PLACEMENT_3D('',#188321,#188322,#188323); +#188321 = CARTESIAN_POINT('',(171.05714303934,-86.40959803934,1.585)); +#188322 = DIRECTION('',(0.,0.,-1.)); +#188323 = DIRECTION('',(-0.999999999872,1.598967539908E-05,0.)); +#188324 = ORIENTED_EDGE('',*,*,#188325,.T.); +#188325 = EDGE_CURVE('',#188317,#188326,#188328,.T.); +#188326 = VERTEX_POINT('',#188327); +#188327 = CARTESIAN_POINT('',(171.360335,-86.345232,1.585)); +#188328 = LINE('',#188329,#188330); +#188329 = CARTESIAN_POINT('',(171.057142,-86.344597,1.585)); +#188330 = VECTOR('',#188331,1.); +#188331 = DIRECTION('',(0.999997806803,-2.094370936408E-03,0.)); +#188332 = ORIENTED_EDGE('',*,*,#188333,.T.); +#188333 = EDGE_CURVE('',#188326,#188334,#188336,.T.); +#188334 = VERTEX_POINT('',#188335); +#188335 = CARTESIAN_POINT('',(171.386211,-86.351459,1.585)); +#188336 = LINE('',#188337,#188338); +#188337 = CARTESIAN_POINT('',(171.360335,-86.345232,1.585)); +#188338 = VECTOR('',#188339,1.); +#188339 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#188340 = ORIENTED_EDGE('',*,*,#188341,.T.); +#188341 = EDGE_CURVE('',#188334,#188342,#188344,.T.); +#188342 = VERTEX_POINT('',#188343); +#188343 = CARTESIAN_POINT('',(171.488819,-86.406492,1.585)); +#188344 = LINE('',#188345,#188346); +#188345 = CARTESIAN_POINT('',(171.386211,-86.351459,1.585)); +#188346 = VECTOR('',#188347,1.); +#188347 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#188348 = ORIENTED_EDGE('',*,*,#188349,.T.); +#188349 = EDGE_CURVE('',#188342,#188350,#188352,.T.); +#188350 = VERTEX_POINT('',#188351); +#188351 = CARTESIAN_POINT('',(171.543852,-86.466242,1.585)); +#188352 = LINE('',#188353,#188354); +#188353 = CARTESIAN_POINT('',(171.488819,-86.406492,1.585)); +#188354 = VECTOR('',#188355,1.); +#188355 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#188356 = ORIENTED_EDGE('',*,*,#188357,.T.); +#188357 = EDGE_CURVE('',#188350,#188358,#188360,.T.); +#188358 = VERTEX_POINT('',#188359); +#188359 = CARTESIAN_POINT('',(171.537465,-86.789751,1.585)); +#188360 = CIRCLE('',#188361,0.260195634991); +#188361 = AXIS2_PLACEMENT_3D('',#188362,#188363,#188364); +#188362 = CARTESIAN_POINT('',(171.3369163306,-86.62397404239,1.585)); +#188363 = DIRECTION('',(0.,0.,-1.)); +#188364 = DIRECTION('',(0.795307997401,0.606205566842,0.)); +#188365 = ORIENTED_EDGE('',*,*,#188366,.T.); +#188366 = EDGE_CURVE('',#188358,#188367,#188369,.T.); +#188367 = VERTEX_POINT('',#188368); +#188368 = CARTESIAN_POINT('',(171.510589,-86.820973,1.585)); +#188369 = LINE('',#188370,#188371); +#188370 = CARTESIAN_POINT('',(171.537465,-86.789751,1.585)); +#188371 = VECTOR('',#188372,1.); +#188372 = DIRECTION('',(-0.652389160842,-0.757884148677,0.)); +#188373 = ORIENTED_EDGE('',*,*,#188374,.T.); +#188374 = EDGE_CURVE('',#188367,#188375,#188377,.T.); +#188375 = VERTEX_POINT('',#188376); +#188376 = CARTESIAN_POINT('',(171.531676,-86.835063,1.585)); +#188377 = LINE('',#188378,#188379); +#188378 = CARTESIAN_POINT('',(171.510589,-86.820973,1.585)); +#188379 = VECTOR('',#188380,1.); +#188380 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#188381 = ORIENTED_EDGE('',*,*,#188382,.T.); +#188382 = EDGE_CURVE('',#188375,#188383,#188385,.T.); +#188383 = VERTEX_POINT('',#188384); +#188384 = CARTESIAN_POINT('',(171.633512,-87.152824,1.585)); +#188385 = CIRCLE('',#188386,0.311668456373); +#188386 = AXIS2_PLACEMENT_3D('',#188387,#188388,#188389); +#188387 = CARTESIAN_POINT('',(171.33190146242,-87.07428540872,1.585)); +#188388 = DIRECTION('',(0.,0.,-1.)); +#188389 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#188390 = ORIENTED_EDGE('',*,*,#188391,.T.); +#188391 = EDGE_CURVE('',#188383,#188392,#188394,.T.); +#188392 = VERTEX_POINT('',#188393); +#188393 = CARTESIAN_POINT('',(171.580321,-87.26118,1.585)); +#188394 = LINE('',#188395,#188396); +#188395 = CARTESIAN_POINT('',(171.633512,-87.152824,1.585)); +#188396 = VECTOR('',#188397,1.); +#188397 = DIRECTION('',(-0.440660203323,-0.897673986037,0.)); +#188398 = ORIENTED_EDGE('',*,*,#188399,.T.); +#188399 = EDGE_CURVE('',#188392,#188400,#188402,.T.); +#188400 = VERTEX_POINT('',#188401); +#188401 = CARTESIAN_POINT('',(171.523021,-87.318484,1.585)); +#188402 = LINE('',#188403,#188404); +#188403 = CARTESIAN_POINT('',(171.580321,-87.26118,1.585)); +#188404 = VECTOR('',#188405,1.); +#188405 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#188406 = ORIENTED_EDGE('',*,*,#188407,.T.); +#188407 = EDGE_CURVE('',#188400,#188408,#188410,.T.); +#188408 = VERTEX_POINT('',#188409); +#188409 = CARTESIAN_POINT('',(171.414655,-87.371681,1.585)); +#188410 = LINE('',#188411,#188412); +#188411 = CARTESIAN_POINT('',(171.523021,-87.318484,1.585)); +#188412 = VECTOR('',#188413,1.); +#188413 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#188414 = ORIENTED_EDGE('',*,*,#188415,.T.); +#188415 = EDGE_CURVE('',#188408,#188416,#188418,.T.); +#188416 = VERTEX_POINT('',#188417); +#188417 = CARTESIAN_POINT('',(171.057142,-87.374597,1.585)); +#188418 = LINE('',#188419,#188420); +#188419 = CARTESIAN_POINT('',(171.414655,-87.371681,1.585)); +#188420 = VECTOR('',#188421,1.); +#188421 = DIRECTION('',(-0.999966738663,-8.156075471217E-03,0.)); +#188422 = ORIENTED_EDGE('',*,*,#188423,.T.); +#188423 = EDGE_CURVE('',#188416,#188424,#188426,.T.); +#188424 = VERTEX_POINT('',#188425); +#188425 = CARTESIAN_POINT('',(170.992142,-87.309597,1.585)); +#188426 = CIRCLE('',#188427,6.500103935387E-02); +#188427 = AXIS2_PLACEMENT_3D('',#188428,#188429,#188430); +#188428 = CARTESIAN_POINT('',(171.05714303934,-87.30959596065,1.585)); +#188429 = DIRECTION('',(0.,0.,-1.)); +#188430 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#188431 = ORIENTED_EDGE('',*,*,#188432,.T.); +#188432 = EDGE_CURVE('',#188424,#188315,#188433,.T.); +#188433 = LINE('',#188434,#188435); +#188434 = CARTESIAN_POINT('',(170.992142,-87.309597,1.585)); +#188435 = VECTOR('',#188436,1.); +#188436 = DIRECTION('',(0.,1.,0.)); +#188437 = FACE_BOUND('',#188438,.F.); +#188438 = EDGE_LOOP('',(#188439,#188449,#188457,#188465,#188473,#188482, + #188490,#188498)); +#188439 = ORIENTED_EDGE('',*,*,#188440,.T.); +#188440 = EDGE_CURVE('',#188441,#188443,#188445,.T.); +#188441 = VERTEX_POINT('',#188442); +#188442 = CARTESIAN_POINT('',(171.450602,-86.937837,1.585)); +#188443 = VERTEX_POINT('',#188444); +#188444 = CARTESIAN_POINT('',(171.346595,-86.903168,1.585)); +#188445 = LINE('',#188446,#188447); +#188446 = CARTESIAN_POINT('',(171.450602,-86.937837,1.585)); +#188447 = VECTOR('',#188448,1.); +#188448 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#188449 = ORIENTED_EDGE('',*,*,#188450,.T.); +#188450 = EDGE_CURVE('',#188443,#188451,#188453,.T.); +#188451 = VERTEX_POINT('',#188452); +#188452 = CARTESIAN_POINT('',(171.122142,-86.903168,1.585)); +#188453 = LINE('',#188454,#188455); +#188454 = CARTESIAN_POINT('',(171.346595,-86.903168,1.585)); +#188455 = VECTOR('',#188456,1.); +#188456 = DIRECTION('',(-1.,0.,0.)); +#188457 = ORIENTED_EDGE('',*,*,#188458,.T.); +#188458 = EDGE_CURVE('',#188451,#188459,#188461,.T.); +#188459 = VERTEX_POINT('',#188460); +#188460 = CARTESIAN_POINT('',(171.122142,-87.244597,1.585)); +#188461 = LINE('',#188462,#188463); +#188462 = CARTESIAN_POINT('',(171.122142,-86.903168,1.585)); +#188463 = VECTOR('',#188464,1.); +#188464 = DIRECTION('',(0.,-1.,0.)); +#188465 = ORIENTED_EDGE('',*,*,#188466,.T.); +#188466 = EDGE_CURVE('',#188459,#188467,#188469,.T.); +#188467 = VERTEX_POINT('',#188468); +#188468 = CARTESIAN_POINT('',(171.384654,-87.244597,1.585)); +#188469 = LINE('',#188470,#188471); +#188470 = CARTESIAN_POINT('',(171.122142,-87.244597,1.585)); +#188471 = VECTOR('',#188472,1.); +#188472 = DIRECTION('',(1.,0.,0.)); +#188473 = ORIENTED_EDGE('',*,*,#188474,.T.); +#188474 = EDGE_CURVE('',#188467,#188475,#188477,.T.); +#188475 = VERTEX_POINT('',#188476); +#188476 = CARTESIAN_POINT('',(171.506428,-87.122823,1.585)); +#188477 = CIRCLE('',#188478,0.170996196456); +#188478 = AXIS2_PLACEMENT_3D('',#188479,#188480,#188481); +#188479 = CARTESIAN_POINT('',(171.3410775,-87.0792465,1.585)); +#188480 = DIRECTION('',(0.,0.,1.)); +#188481 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#188482 = ORIENTED_EDGE('',*,*,#188483,.T.); +#188483 = EDGE_CURVE('',#188475,#188484,#188486,.T.); +#188484 = VERTEX_POINT('',#188485); +#188485 = CARTESIAN_POINT('',(171.506428,-87.024941,1.585)); +#188486 = LINE('',#188487,#188488); +#188487 = CARTESIAN_POINT('',(171.506428,-87.122823,1.585)); +#188488 = VECTOR('',#188489,1.); +#188489 = DIRECTION('',(0.,1.,0.)); +#188490 = ORIENTED_EDGE('',*,*,#188491,.T.); +#188491 = EDGE_CURVE('',#188484,#188492,#188494,.T.); +#188492 = VERTEX_POINT('',#188493); +#188493 = CARTESIAN_POINT('',(171.475149,-86.962384,1.585)); +#188494 = LINE('',#188495,#188496); +#188495 = CARTESIAN_POINT('',(171.506428,-87.024941,1.585)); +#188496 = VECTOR('',#188497,1.); +#188497 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#188498 = ORIENTED_EDGE('',*,*,#188499,.T.); +#188499 = EDGE_CURVE('',#188492,#188441,#188500,.T.); +#188500 = LINE('',#188501,#188502); +#188501 = CARTESIAN_POINT('',(171.475149,-86.962384,1.585)); +#188502 = VECTOR('',#188503,1.); +#188503 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#188504 = FACE_BOUND('',#188505,.F.); +#188505 = EDGE_LOOP('',(#188506,#188517,#188525,#188533,#188541,#188550) + ); +#188506 = ORIENTED_EDGE('',*,*,#188507,.T.); +#188507 = EDGE_CURVE('',#188508,#188510,#188512,.T.); +#188508 = VERTEX_POINT('',#188509); +#188509 = CARTESIAN_POINT('',(171.463571,-86.59637,1.585)); +#188510 = VERTEX_POINT('',#188511); +#188511 = CARTESIAN_POINT('',(171.341797,-86.474597,1.585)); +#188512 = CIRCLE('',#188513,0.170996278941); +#188513 = AXIS2_PLACEMENT_3D('',#188514,#188515,#188516); +#188514 = CARTESIAN_POINT('',(171.2982207157,-86.63994764214,1.585)); +#188515 = DIRECTION('',(0.,0.,1.)); +#188516 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#188517 = ORIENTED_EDGE('',*,*,#188518,.T.); +#188518 = EDGE_CURVE('',#188510,#188519,#188521,.T.); +#188519 = VERTEX_POINT('',#188520); +#188520 = CARTESIAN_POINT('',(171.122142,-86.474597,1.585)); +#188521 = LINE('',#188522,#188523); +#188522 = CARTESIAN_POINT('',(171.341797,-86.474597,1.585)); +#188523 = VECTOR('',#188524,1.); +#188524 = DIRECTION('',(-1.,0.,0.)); +#188525 = ORIENTED_EDGE('',*,*,#188526,.T.); +#188526 = EDGE_CURVE('',#188519,#188527,#188529,.T.); +#188527 = VERTEX_POINT('',#188528); +#188528 = CARTESIAN_POINT('',(171.122142,-86.773168,1.585)); +#188529 = LINE('',#188530,#188531); +#188530 = CARTESIAN_POINT('',(171.122142,-86.474597,1.585)); +#188531 = VECTOR('',#188532,1.); +#188532 = DIRECTION('',(0.,-1.,0.)); +#188533 = ORIENTED_EDGE('',*,*,#188534,.T.); +#188534 = EDGE_CURVE('',#188527,#188535,#188537,.T.); +#188535 = VERTEX_POINT('',#188536); +#188536 = CARTESIAN_POINT('',(171.341797,-86.773168,1.585)); +#188537 = LINE('',#188538,#188539); +#188538 = CARTESIAN_POINT('',(171.122142,-86.773168,1.585)); +#188539 = VECTOR('',#188540,1.); +#188540 = DIRECTION('',(1.,0.,0.)); +#188541 = ORIENTED_EDGE('',*,*,#188542,.T.); +#188542 = EDGE_CURVE('',#188535,#188543,#188545,.T.); +#188543 = VERTEX_POINT('',#188544); +#188544 = CARTESIAN_POINT('',(171.463571,-86.651395,1.585)); +#188545 = CIRCLE('',#188546,0.171001125777); +#188546 = AXIS2_PLACEMENT_3D('',#188547,#188548,#188549); +#188547 = CARTESIAN_POINT('',(171.29821674885,-86.60781339097,1.585)); +#188548 = DIRECTION('',(0.,0.,1.)); +#188549 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#188550 = ORIENTED_EDGE('',*,*,#188551,.T.); +#188551 = EDGE_CURVE('',#188543,#188508,#188552,.T.); +#188552 = LINE('',#188553,#188554); +#188553 = CARTESIAN_POINT('',(171.463571,-86.651395,1.585)); +#188554 = VECTOR('',#188555,1.); +#188555 = DIRECTION('',(0.,1.,0.)); +#188556 = PLANE('',#188557); +#188557 = AXIS2_PLACEMENT_3D('',#188558,#188559,#188560); +#188558 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188559 = DIRECTION('',(0.,0.,1.)); +#188560 = DIRECTION('',(1.,0.,-0.)); +#188561 = SHELL_BASED_SURFACE_MODEL('',(#188562)); +#188562 = OPEN_SHELL('',(#188563)); +#188563 = ADVANCED_FACE('',(#188564),#188828,.T.); +#188564 = FACE_BOUND('',#188565,.F.); +#188565 = EDGE_LOOP('',(#188566,#188576,#188584,#188592,#188601,#188609, + #188617,#188626,#188634,#188642,#188650,#188658,#188666,#188674, + #188682,#188691,#188699,#188707,#188715,#188723,#188732,#188740, + #188748,#188757,#188765,#188773,#188781,#188789,#188797,#188805, + #188813,#188822)); +#188566 = ORIENTED_EDGE('',*,*,#188567,.T.); +#188567 = EDGE_CURVE('',#188568,#188570,#188572,.T.); +#188568 = VERTEX_POINT('',#188569); +#188569 = CARTESIAN_POINT('',(170.205558,-86.400702,1.585)); +#188570 = VERTEX_POINT('',#188571); +#188571 = CARTESIAN_POINT('',(170.313914,-86.347512,1.585)); +#188572 = LINE('',#188573,#188574); +#188573 = CARTESIAN_POINT('',(170.205558,-86.400702,1.585)); +#188574 = VECTOR('',#188575,1.); +#188575 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#188576 = ORIENTED_EDGE('',*,*,#188577,.T.); +#188577 = EDGE_CURVE('',#188570,#188578,#188580,.T.); +#188578 = VERTEX_POINT('',#188579); +#188579 = CARTESIAN_POINT('',(170.553078,-86.34663,1.585)); +#188580 = LINE('',#188581,#188582); +#188581 = CARTESIAN_POINT('',(170.313914,-86.347512,1.585)); +#188582 = VECTOR('',#188583,1.); +#188583 = DIRECTION('',(0.999993199965,3.687820919367E-03,0.)); +#188584 = ORIENTED_EDGE('',*,*,#188585,.T.); +#188585 = EDGE_CURVE('',#188578,#188586,#188588,.T.); +#188586 = VERTEX_POINT('',#188587); +#188587 = CARTESIAN_POINT('',(170.691983,-86.39079,1.585)); +#188588 = LINE('',#188589,#188590); +#188589 = CARTESIAN_POINT('',(170.553078,-86.34663,1.585)); +#188590 = VECTOR('',#188591,1.); +#188591 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#188592 = ORIENTED_EDGE('',*,*,#188593,.T.); +#188593 = EDGE_CURVE('',#188586,#188594,#188596,.T.); +#188594 = VERTEX_POINT('',#188595); +#188595 = CARTESIAN_POINT('',(170.650874,-86.514119,1.585)); +#188596 = CIRCLE('',#188597,6.499998485858E-02); +#188597 = AXIS2_PLACEMENT_3D('',#188598,#188599,#188600); +#188598 = CARTESIAN_POINT('',(170.67142749751,-86.45245416584,1.585)); +#188599 = DIRECTION('',(0.,0.,-1.)); +#188600 = DIRECTION('',(0.316238573437,0.948679695509,0.)); +#188601 = ORIENTED_EDGE('',*,*,#188602,.T.); +#188602 = EDGE_CURVE('',#188594,#188603,#188605,.T.); +#188603 = VERTEX_POINT('',#188604); +#188604 = CARTESIAN_POINT('',(170.532309,-86.474597,1.585)); +#188605 = LINE('',#188606,#188607); +#188606 = CARTESIAN_POINT('',(170.650874,-86.514119,1.585)); +#188607 = VECTOR('',#188608,1.); +#188608 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#188609 = ORIENTED_EDGE('',*,*,#188610,.T.); +#188610 = EDGE_CURVE('',#188603,#188611,#188613,.T.); +#188611 = VERTEX_POINT('',#188612); +#188612 = CARTESIAN_POINT('',(170.343916,-86.474597,1.585)); +#188613 = LINE('',#188614,#188615); +#188614 = CARTESIAN_POINT('',(170.532309,-86.474597,1.585)); +#188615 = VECTOR('',#188616,1.); +#188616 = DIRECTION('',(-1.,0.,0.)); +#188617 = ORIENTED_EDGE('',*,*,#188618,.T.); +#188618 = EDGE_CURVE('',#188611,#188619,#188621,.T.); +#188619 = VERTEX_POINT('',#188620); +#188620 = CARTESIAN_POINT('',(170.222142,-86.59637,1.585)); +#188621 = CIRCLE('',#188622,0.170991742693); +#188622 = AXIS2_PLACEMENT_3D('',#188623,#188624,#188625); +#188623 = CARTESIAN_POINT('',(170.38748857161,-86.63994392943,1.585)); +#188624 = DIRECTION('',(0.,0.,1.)); +#188625 = DIRECTION('',(-0.254822665256,0.966987802028,0.)); +#188626 = ORIENTED_EDGE('',*,*,#188627,.T.); +#188627 = EDGE_CURVE('',#188619,#188628,#188630,.T.); +#188628 = VERTEX_POINT('',#188629); +#188629 = CARTESIAN_POINT('',(170.222142,-86.651395,1.585)); +#188630 = LINE('',#188631,#188632); +#188631 = CARTESIAN_POINT('',(170.222142,-86.59637,1.585)); +#188632 = VECTOR('',#188633,1.); +#188633 = DIRECTION('',(0.,-1.,0.)); +#188634 = ORIENTED_EDGE('',*,*,#188635,.T.); +#188635 = EDGE_CURVE('',#188628,#188636,#188638,.T.); +#188636 = VERTEX_POINT('',#188637); +#188637 = CARTESIAN_POINT('',(170.25342,-86.713951,1.585)); +#188638 = LINE('',#188639,#188640); +#188639 = CARTESIAN_POINT('',(170.222142,-86.651395,1.585)); +#188640 = VECTOR('',#188641,1.); +#188641 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#188642 = ORIENTED_EDGE('',*,*,#188643,.T.); +#188643 = EDGE_CURVE('',#188636,#188644,#188646,.T.); +#188644 = VERTEX_POINT('',#188645); +#188645 = CARTESIAN_POINT('',(170.281358,-86.741889,1.585)); +#188646 = LINE('',#188647,#188648); +#188647 = CARTESIAN_POINT('',(170.25342,-86.713951,1.585)); +#188648 = VECTOR('',#188649,1.); +#188649 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#188650 = ORIENTED_EDGE('',*,*,#188651,.T.); +#188651 = EDGE_CURVE('',#188644,#188652,#188654,.T.); +#188652 = VERTEX_POINT('',#188653); +#188653 = CARTESIAN_POINT('',(170.351259,-86.776839,1.585)); +#188654 = LINE('',#188655,#188656); +#188655 = CARTESIAN_POINT('',(170.281358,-86.741889,1.585)); +#188656 = VECTOR('',#188657,1.); +#188657 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#188658 = ORIENTED_EDGE('',*,*,#188659,.T.); +#188659 = EDGE_CURVE('',#188652,#188660,#188662,.T.); +#188660 = VERTEX_POINT('',#188661); +#188661 = CARTESIAN_POINT('',(170.529068,-86.822887,1.585)); +#188662 = LINE('',#188663,#188664); +#188663 = CARTESIAN_POINT('',(170.351259,-86.776839,1.585)); +#188664 = VECTOR('',#188665,1.); +#188665 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#188666 = ORIENTED_EDGE('',*,*,#188667,.T.); +#188667 = EDGE_CURVE('',#188660,#188668,#188670,.T.); +#188668 = VERTEX_POINT('',#188669); +#188669 = CARTESIAN_POINT('',(170.631676,-86.877921,1.585)); +#188670 = LINE('',#188671,#188672); +#188671 = CARTESIAN_POINT('',(170.529068,-86.822887,1.585)); +#188672 = VECTOR('',#188673,1.); +#188673 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#188674 = ORIENTED_EDGE('',*,*,#188675,.T.); +#188675 = EDGE_CURVE('',#188668,#188676,#188678,.T.); +#188676 = VERTEX_POINT('',#188677); +#188677 = CARTESIAN_POINT('',(170.686709,-86.937671,1.585)); +#188678 = LINE('',#188679,#188680); +#188679 = CARTESIAN_POINT('',(170.631676,-86.877921,1.585)); +#188680 = VECTOR('',#188681,1.); +#188681 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#188682 = ORIENTED_EDGE('',*,*,#188683,.T.); +#188683 = EDGE_CURVE('',#188676,#188684,#188686,.T.); +#188684 = VERTEX_POINT('',#188685); +#188685 = CARTESIAN_POINT('',(170.680321,-87.26118,1.585)); +#188686 = CIRCLE('',#188687,0.260194262446); +#188687 = AXIS2_PLACEMENT_3D('',#188688,#188689,#188690); +#188688 = CARTESIAN_POINT('',(170.47977460304,-87.09540244761,1.585)); +#188689 = DIRECTION('',(0.,0.,-1.)); +#188690 = DIRECTION('',(0.795307302373,0.606206478678,0.)); +#188691 = ORIENTED_EDGE('',*,*,#188692,.T.); +#188692 = EDGE_CURVE('',#188684,#188693,#188695,.T.); +#188693 = VERTEX_POINT('',#188694); +#188694 = CARTESIAN_POINT('',(170.623021,-87.318484,1.585)); +#188695 = LINE('',#188696,#188697); +#188696 = CARTESIAN_POINT('',(170.680321,-87.26118,1.585)); +#188697 = VECTOR('',#188698,1.); +#188698 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#188699 = ORIENTED_EDGE('',*,*,#188700,.T.); +#188700 = EDGE_CURVE('',#188693,#188701,#188703,.T.); +#188701 = VERTEX_POINT('',#188702); +#188702 = CARTESIAN_POINT('',(170.514655,-87.371681,1.585)); +#188703 = LINE('',#188704,#188705); +#188704 = CARTESIAN_POINT('',(170.623021,-87.318484,1.585)); +#188705 = VECTOR('',#188706,1.); +#188706 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#188707 = ORIENTED_EDGE('',*,*,#188708,.T.); +#188708 = EDGE_CURVE('',#188701,#188709,#188711,.T.); +#188709 = VERTEX_POINT('',#188710); +#188710 = CARTESIAN_POINT('',(170.275498,-87.372564,1.585)); +#188711 = LINE('',#188712,#188713); +#188712 = CARTESIAN_POINT('',(170.514655,-87.371681,1.585)); +#188713 = VECTOR('',#188714,1.); +#188714 = DIRECTION('',(-0.999993184138,-3.692110126803E-03,0.)); +#188715 = ORIENTED_EDGE('',*,*,#188716,.T.); +#188716 = EDGE_CURVE('',#188709,#188717,#188719,.T.); +#188717 = VERTEX_POINT('',#188718); +#188718 = CARTESIAN_POINT('',(170.136587,-87.328404,1.585)); +#188719 = LINE('',#188720,#188721); +#188720 = CARTESIAN_POINT('',(170.275498,-87.372564,1.585)); +#188721 = VECTOR('',#188722,1.); +#188722 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#188723 = ORIENTED_EDGE('',*,*,#188724,.T.); +#188724 = EDGE_CURVE('',#188717,#188725,#188727,.T.); +#188725 = VERTEX_POINT('',#188726); +#188726 = CARTESIAN_POINT('',(170.177697,-87.205076,1.585)); +#188727 = CIRCLE('',#188728,6.499966862237E-02); +#188728 = AXIS2_PLACEMENT_3D('',#188729,#188730,#188731); +#188729 = CARTESIAN_POINT('',(170.15714212923,-87.26674004307,1.585)); +#188730 = DIRECTION('',(0.,0.,-1.)); +#188731 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#188732 = ORIENTED_EDGE('',*,*,#188733,.T.); +#188733 = EDGE_CURVE('',#188725,#188734,#188736,.T.); +#188734 = VERTEX_POINT('',#188735); +#188735 = CARTESIAN_POINT('',(170.296261,-87.244597,1.585)); +#188736 = LINE('',#188737,#188738); +#188737 = CARTESIAN_POINT('',(170.177697,-87.205076,1.585)); +#188738 = VECTOR('',#188739,1.); +#188739 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#188740 = ORIENTED_EDGE('',*,*,#188741,.T.); +#188741 = EDGE_CURVE('',#188734,#188742,#188744,.T.); +#188742 = VERTEX_POINT('',#188743); +#188743 = CARTESIAN_POINT('',(170.484654,-87.244597,1.585)); +#188744 = LINE('',#188745,#188746); +#188745 = CARTESIAN_POINT('',(170.296261,-87.244597,1.585)); +#188746 = VECTOR('',#188747,1.); +#188747 = DIRECTION('',(1.,0.,0.)); +#188748 = ORIENTED_EDGE('',*,*,#188749,.T.); +#188749 = EDGE_CURVE('',#188742,#188750,#188752,.T.); +#188750 = VERTEX_POINT('',#188751); +#188751 = CARTESIAN_POINT('',(170.606428,-87.122823,1.585)); +#188752 = CIRCLE('',#188753,0.170996196456); +#188753 = AXIS2_PLACEMENT_3D('',#188754,#188755,#188756); +#188754 = CARTESIAN_POINT('',(170.4410775,-87.0792465,1.585)); +#188755 = DIRECTION('',(0.,0.,1.)); +#188756 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#188757 = ORIENTED_EDGE('',*,*,#188758,.T.); +#188758 = EDGE_CURVE('',#188750,#188759,#188761,.T.); +#188759 = VERTEX_POINT('',#188760); +#188760 = CARTESIAN_POINT('',(170.606428,-87.067799,1.585)); +#188761 = LINE('',#188762,#188763); +#188762 = CARTESIAN_POINT('',(170.606428,-87.122823,1.585)); +#188763 = VECTOR('',#188764,1.); +#188764 = DIRECTION('',(0.,1.,0.)); +#188765 = ORIENTED_EDGE('',*,*,#188766,.T.); +#188766 = EDGE_CURVE('',#188759,#188767,#188769,.T.); +#188767 = VERTEX_POINT('',#188768); +#188768 = CARTESIAN_POINT('',(170.575149,-87.005242,1.585)); +#188769 = LINE('',#188770,#188771); +#188770 = CARTESIAN_POINT('',(170.606428,-87.067799,1.585)); +#188771 = VECTOR('',#188772,1.); +#188772 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#188773 = ORIENTED_EDGE('',*,*,#188774,.T.); +#188774 = EDGE_CURVE('',#188767,#188775,#188777,.T.); +#188775 = VERTEX_POINT('',#188776); +#188776 = CARTESIAN_POINT('',(170.547212,-86.977303,1.585)); +#188777 = LINE('',#188778,#188779); +#188778 = CARTESIAN_POINT('',(170.575149,-87.005242,1.585)); +#188779 = VECTOR('',#188780,1.); +#188780 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#188781 = ORIENTED_EDGE('',*,*,#188782,.T.); +#188782 = EDGE_CURVE('',#188775,#188783,#188785,.T.); +#188783 = VERTEX_POINT('',#188784); +#188784 = CARTESIAN_POINT('',(170.47731,-86.942353,1.585)); +#188785 = LINE('',#188786,#188787); +#188786 = CARTESIAN_POINT('',(170.547212,-86.977303,1.585)); +#188787 = VECTOR('',#188788,1.); +#188788 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#188789 = ORIENTED_EDGE('',*,*,#188790,.T.); +#188790 = EDGE_CURVE('',#188783,#188791,#188793,.T.); +#188791 = VERTEX_POINT('',#188792); +#188792 = CARTESIAN_POINT('',(170.299502,-86.896306,1.585)); +#188793 = LINE('',#188794,#188795); +#188794 = CARTESIAN_POINT('',(170.47731,-86.942353,1.585)); +#188795 = VECTOR('',#188796,1.); +#188796 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#188797 = ORIENTED_EDGE('',*,*,#188798,.T.); +#188798 = EDGE_CURVE('',#188791,#188799,#188801,.T.); +#188799 = VERTEX_POINT('',#188800); +#188800 = CARTESIAN_POINT('',(170.196894,-86.841273,1.585)); +#188801 = LINE('',#188802,#188803); +#188802 = CARTESIAN_POINT('',(170.299502,-86.896306,1.585)); +#188803 = VECTOR('',#188804,1.); +#188804 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#188805 = ORIENTED_EDGE('',*,*,#188806,.T.); +#188806 = EDGE_CURVE('',#188799,#188807,#188809,.T.); +#188807 = VERTEX_POINT('',#188808); +#188808 = CARTESIAN_POINT('',(170.141861,-86.781523,1.585)); +#188809 = LINE('',#188810,#188811); +#188810 = CARTESIAN_POINT('',(170.196894,-86.841273,1.585)); +#188811 = VECTOR('',#188812,1.); +#188812 = DIRECTION('',(-0.677476455829,0.73554445943,0.)); +#188813 = ORIENTED_EDGE('',*,*,#188814,.T.); +#188814 = EDGE_CURVE('',#188807,#188815,#188817,.T.); +#188815 = VERTEX_POINT('',#188816); +#188816 = CARTESIAN_POINT('',(170.148247,-86.458013,1.585)); +#188817 = CIRCLE('',#188818,0.260194992516); +#188818 = AXIS2_PLACEMENT_3D('',#188819,#188820,#188821); +#188819 = CARTESIAN_POINT('',(170.34879497292,-86.62378979176,1.585)); +#188820 = DIRECTION('',(0.,0.,-1.)); +#188821 = DIRECTION('',(-0.795303441168,-0.606211544319,-0.)); +#188822 = ORIENTED_EDGE('',*,*,#188823,.T.); +#188823 = EDGE_CURVE('',#188815,#188568,#188824,.T.); +#188824 = LINE('',#188825,#188826); +#188825 = CARTESIAN_POINT('',(170.148247,-86.458013,1.585)); +#188826 = VECTOR('',#188827,1.); +#188827 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#188828 = PLANE('',#188829); +#188829 = AXIS2_PLACEMENT_3D('',#188830,#188831,#188832); +#188830 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188831 = DIRECTION('',(0.,0.,1.)); +#188832 = DIRECTION('',(1.,0.,-0.)); +#188833 = SHELL_BASED_SURFACE_MODEL('',(#188834)); +#188834 = OPEN_SHELL('',(#188835)); +#188835 = ADVANCED_FACE('',(#188836),#188948,.T.); +#188836 = FACE_BOUND('',#188837,.F.); +#188837 = EDGE_LOOP('',(#188838,#188849,#188857,#188866,#188874,#188883, + #188891,#188900,#188908,#188917,#188925,#188934,#188942)); +#188838 = ORIENTED_EDGE('',*,*,#188839,.T.); +#188839 = EDGE_CURVE('',#188840,#188842,#188844,.T.); +#188840 = VERTEX_POINT('',#188841); +#188841 = CARTESIAN_POINT('',(169.19709,-86.384723,1.585)); +#188842 = VERTEX_POINT('',#188843); +#188843 = CARTESIAN_POINT('',(169.322142,-86.409597,1.585)); +#188844 = CIRCLE('',#188845,6.499988811648E-02); +#188845 = AXIS2_PLACEMENT_3D('',#188846,#188847,#188848); +#188846 = CARTESIAN_POINT('',(169.25714211188,-86.4095972701,1.585)); +#188847 = DIRECTION('',(0.,0.,-1.)); +#188848 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#188849 = ORIENTED_EDGE('',*,*,#188850,.T.); +#188850 = EDGE_CURVE('',#188842,#188851,#188853,.T.); +#188851 = VERTEX_POINT('',#188852); +#188852 = CARTESIAN_POINT('',(169.322142,-87.122823,1.585)); +#188853 = LINE('',#188854,#188855); +#188854 = CARTESIAN_POINT('',(169.322142,-86.409597,1.585)); +#188855 = VECTOR('',#188856,1.); +#188856 = DIRECTION('',(0.,-1.,0.)); +#188857 = ORIENTED_EDGE('',*,*,#188858,.T.); +#188858 = EDGE_CURVE('',#188851,#188859,#188861,.T.); +#188859 = VERTEX_POINT('',#188860); +#188860 = CARTESIAN_POINT('',(169.443916,-87.244597,1.585)); +#188861 = CIRCLE('',#188862,0.170999251022); +#188862 = AXIS2_PLACEMENT_3D('',#188863,#188864,#188865); +#188863 = CARTESIAN_POINT('',(169.487495,-87.079244,1.585)); +#188864 = DIRECTION('',(0.,0.,1.)); +#188865 = DIRECTION('',(-0.966980843553,-0.254849069452,0.)); +#188866 = ORIENTED_EDGE('',*,*,#188867,.T.); +#188867 = EDGE_CURVE('',#188859,#188868,#188870,.T.); +#188868 = VERTEX_POINT('',#188869); +#188869 = CARTESIAN_POINT('',(169.584654,-87.244597,1.585)); +#188870 = LINE('',#188871,#188872); +#188871 = CARTESIAN_POINT('',(169.443916,-87.244597,1.585)); +#188872 = VECTOR('',#188873,1.); +#188873 = DIRECTION('',(1.,0.,0.)); +#188874 = ORIENTED_EDGE('',*,*,#188875,.T.); +#188875 = EDGE_CURVE('',#188868,#188876,#188878,.T.); +#188876 = VERTEX_POINT('',#188877); +#188877 = CARTESIAN_POINT('',(169.706428,-87.122823,1.585)); +#188878 = CIRCLE('',#188879,0.170996196456); +#188879 = AXIS2_PLACEMENT_3D('',#188880,#188881,#188882); +#188880 = CARTESIAN_POINT('',(169.5410775,-87.0792465,1.585)); +#188881 = DIRECTION('',(0.,0.,1.)); +#188882 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#188883 = ORIENTED_EDGE('',*,*,#188884,.T.); +#188884 = EDGE_CURVE('',#188876,#188885,#188887,.T.); +#188885 = VERTEX_POINT('',#188886); +#188886 = CARTESIAN_POINT('',(169.706428,-86.409597,1.585)); +#188887 = LINE('',#188888,#188889); +#188888 = CARTESIAN_POINT('',(169.706428,-87.122823,1.585)); +#188889 = VECTOR('',#188890,1.); +#188890 = DIRECTION('',(0.,1.,0.)); +#188891 = ORIENTED_EDGE('',*,*,#188892,.T.); +#188892 = EDGE_CURVE('',#188885,#188893,#188895,.T.); +#188893 = VERTEX_POINT('',#188894); +#188894 = CARTESIAN_POINT('',(169.836428,-86.409597,1.585)); +#188895 = CIRCLE('',#188896,6.500000000093E-02); +#188896 = AXIS2_PLACEMENT_3D('',#188897,#188898,#188899); +#188897 = CARTESIAN_POINT('',(169.771428,-86.40959734486,1.585)); +#188898 = DIRECTION('',(0.,0.,-1.)); +#188899 = DIRECTION('',(-0.999999999986,5.305658244295E-06,0.)); +#188900 = ORIENTED_EDGE('',*,*,#188901,.T.); +#188901 = EDGE_CURVE('',#188893,#188902,#188904,.T.); +#188902 = VERTEX_POINT('',#188903); +#188903 = CARTESIAN_POINT('',(169.833512,-87.152824,1.585)); +#188904 = LINE('',#188905,#188906); +#188905 = CARTESIAN_POINT('',(169.836428,-86.409597,1.585)); +#188906 = VECTOR('',#188907,1.); +#188907 = DIRECTION('',(-3.923401002397E-03,-0.999992303433,0.)); +#188908 = ORIENTED_EDGE('',*,*,#188909,.T.); +#188909 = EDGE_CURVE('',#188902,#188910,#188912,.T.); +#188910 = VERTEX_POINT('',#188911); +#188911 = CARTESIAN_POINT('',(169.614655,-87.371681,1.585)); +#188912 = CIRCLE('',#188913,0.308111908981); +#188913 = AXIS2_PLACEMENT_3D('',#188914,#188915,#188916); +#188914 = CARTESIAN_POINT('',(169.53569061898,-87.07385961898,1.585)); +#188915 = DIRECTION('',(0.,0.,-1.)); +#188916 = DIRECTION('',(0.966601330004,-0.256284741712,0.)); +#188917 = ORIENTED_EDGE('',*,*,#188918,.T.); +#188918 = EDGE_CURVE('',#188910,#188919,#188921,.T.); +#188919 = VERTEX_POINT('',#188920); +#188920 = CARTESIAN_POINT('',(169.413914,-87.371681,1.585)); +#188921 = LINE('',#188922,#188923); +#188922 = CARTESIAN_POINT('',(169.614655,-87.371681,1.585)); +#188923 = VECTOR('',#188924,1.); +#188924 = DIRECTION('',(-1.,0.,0.)); +#188925 = ORIENTED_EDGE('',*,*,#188926,.T.); +#188926 = EDGE_CURVE('',#188919,#188927,#188929,.T.); +#188927 = VERTEX_POINT('',#188928); +#188928 = CARTESIAN_POINT('',(169.195057,-87.152824,1.585)); +#188929 = CIRCLE('',#188930,0.308110297261); +#188930 = AXIS2_PLACEMENT_3D('',#188931,#188932,#188933); +#188931 = CARTESIAN_POINT('',(169.49287706304,-87.07386093695,1.585)); +#188932 = DIRECTION('',(0.,0.,-1.)); +#188933 = DIRECTION('',(-0.256281804756,-0.966602108704,-0.)); +#188934 = ORIENTED_EDGE('',*,*,#188935,.T.); +#188935 = EDGE_CURVE('',#188927,#188936,#188938,.T.); +#188936 = VERTEX_POINT('',#188937); +#188937 = CARTESIAN_POINT('',(169.192142,-86.409597,1.585)); +#188938 = LINE('',#188939,#188940); +#188939 = CARTESIAN_POINT('',(169.195057,-87.152824,1.585)); +#188940 = VECTOR('',#188941,1.); +#188941 = DIRECTION('',(-3.922055549506E-03,0.999992308711,0.)); +#188942 = ORIENTED_EDGE('',*,*,#188943,.T.); +#188943 = EDGE_CURVE('',#188936,#188840,#188944,.T.); +#188944 = LINE('',#188945,#188946); +#188945 = CARTESIAN_POINT('',(169.192142,-86.409597,1.585)); +#188946 = VECTOR('',#188947,1.); +#188947 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#188948 = PLANE('',#188949); +#188949 = AXIS2_PLACEMENT_3D('',#188950,#188951,#188952); +#188950 = CARTESIAN_POINT('',(0.,0.,1.585)); +#188951 = DIRECTION('',(0.,0.,1.)); +#188952 = DIRECTION('',(1.,0.,-0.)); +#188953 = SHELL_BASED_SURFACE_MODEL('',(#188954)); +#188954 = OPEN_SHELL('',(#188955)); +#188955 = ADVANCED_FACE('',(#188956),#189066,.T.); +#188956 = FACE_BOUND('',#188957,.F.); +#188957 = EDGE_LOOP('',(#188958,#188969,#188977,#188985,#188994,#189002, + #189010,#189019,#189027,#189035,#189044,#189052,#189060)); +#188958 = ORIENTED_EDGE('',*,*,#188959,.T.); +#188959 = EDGE_CURVE('',#188960,#188962,#188964,.T.); +#188960 = VERTEX_POINT('',#188961); +#188961 = CARTESIAN_POINT('',(172.239947,-86.599008,1.585)); +#188962 = VERTEX_POINT('',#188963); +#188963 = CARTESIAN_POINT('',(172.364999,-86.623882,1.585)); +#188964 = CIRCLE('',#188965,6.499988811649E-02); +#188965 = AXIS2_PLACEMENT_3D('',#188966,#188967,#188968); +#188966 = CARTESIAN_POINT('',(172.29999911188,-86.6238822701,1.585)); +#188967 = DIRECTION('',(0.,0.,-1.)); +#188968 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#188969 = ORIENTED_EDGE('',*,*,#188970,.T.); +#188970 = EDGE_CURVE('',#188962,#188971,#188973,.T.); +#188971 = VERTEX_POINT('',#188972); +#188972 = CARTESIAN_POINT('',(172.364999,-86.90174,1.585)); +#188973 = LINE('',#188974,#188975); +#188974 = CARTESIAN_POINT('',(172.364999,-86.623882,1.585)); +#188975 = VECTOR('',#188976,1.); +#188976 = DIRECTION('',(0.,-1.,0.)); +#188977 = ORIENTED_EDGE('',*,*,#188978,.T.); +#188978 = EDGE_CURVE('',#188971,#188979,#188981,.T.); +#188979 = VERTEX_POINT('',#188980); +#188980 = CARTESIAN_POINT('',(172.642857,-86.90174,1.585)); +#188981 = LINE('',#188982,#188983); +#188982 = CARTESIAN_POINT('',(172.364999,-86.90174,1.585)); +#188983 = VECTOR('',#188984,1.); +#188984 = DIRECTION('',(1.,0.,0.)); +#188985 = ORIENTED_EDGE('',*,*,#188986,.T.); +#188986 = EDGE_CURVE('',#188979,#188987,#188989,.T.); +#188987 = VERTEX_POINT('',#188988); +#188988 = CARTESIAN_POINT('',(172.642857,-87.03174,1.585)); +#188989 = CIRCLE('',#188990,6.500000000091E-02); +#188990 = AXIS2_PLACEMENT_3D('',#188991,#188992,#188993); +#188991 = CARTESIAN_POINT('',(172.64285665513,-86.96674,1.585)); +#188992 = DIRECTION('',(0.,0.,-1.)); +#188993 = DIRECTION('',(5.30565758841E-06,0.999999999986,0.)); +#188994 = ORIENTED_EDGE('',*,*,#188995,.T.); +#188995 = EDGE_CURVE('',#188987,#188996,#188998,.T.); +#188996 = VERTEX_POINT('',#188997); +#188997 = CARTESIAN_POINT('',(172.364999,-87.03174,1.585)); +#188998 = LINE('',#188999,#189000); +#188999 = CARTESIAN_POINT('',(172.642857,-87.03174,1.585)); +#189000 = VECTOR('',#189001,1.); +#189001 = DIRECTION('',(-1.,0.,0.)); +#189002 = ORIENTED_EDGE('',*,*,#189003,.T.); +#189003 = EDGE_CURVE('',#188996,#189004,#189006,.T.); +#189004 = VERTEX_POINT('',#189005); +#189005 = CARTESIAN_POINT('',(172.364999,-87.309597,1.585)); +#189006 = LINE('',#189007,#189008); +#189007 = CARTESIAN_POINT('',(172.364999,-87.03174,1.585)); +#189008 = VECTOR('',#189009,1.); +#189009 = DIRECTION('',(0.,-1.,0.)); +#189010 = ORIENTED_EDGE('',*,*,#189011,.T.); +#189011 = EDGE_CURVE('',#189004,#189012,#189014,.T.); +#189012 = VERTEX_POINT('',#189013); +#189013 = CARTESIAN_POINT('',(172.234999,-87.309597,1.585)); +#189014 = CIRCLE('',#189015,6.500000000093E-02); +#189015 = AXIS2_PLACEMENT_3D('',#189016,#189017,#189018); +#189016 = CARTESIAN_POINT('',(172.299999,-87.30959665513,1.585)); +#189017 = DIRECTION('',(-0.,0.,-1.)); +#189018 = DIRECTION('',(0.999999999986,-5.305658681554E-06,-0.)); +#189019 = ORIENTED_EDGE('',*,*,#189020,.T.); +#189020 = EDGE_CURVE('',#189012,#189021,#189023,.T.); +#189021 = VERTEX_POINT('',#189022); +#189022 = CARTESIAN_POINT('',(172.234999,-87.03174,1.585)); +#189023 = LINE('',#189024,#189025); +#189024 = CARTESIAN_POINT('',(172.234999,-87.309597,1.585)); +#189025 = VECTOR('',#189026,1.); +#189026 = DIRECTION('',(0.,1.,0.)); +#189027 = ORIENTED_EDGE('',*,*,#189028,.T.); +#189028 = EDGE_CURVE('',#189021,#189029,#189031,.T.); +#189029 = VERTEX_POINT('',#189030); +#189030 = CARTESIAN_POINT('',(171.957142,-87.03174,1.585)); +#189031 = LINE('',#189032,#189033); +#189032 = CARTESIAN_POINT('',(172.234999,-87.03174,1.585)); +#189033 = VECTOR('',#189034,1.); +#189034 = DIRECTION('',(-1.,0.,0.)); +#189035 = ORIENTED_EDGE('',*,*,#189036,.T.); +#189036 = EDGE_CURVE('',#189029,#189037,#189039,.T.); +#189037 = VERTEX_POINT('',#189038); +#189038 = CARTESIAN_POINT('',(171.957142,-86.90174,1.585)); +#189039 = CIRCLE('',#189040,6.500000000092E-02); +#189040 = AXIS2_PLACEMENT_3D('',#189041,#189042,#189043); +#189041 = CARTESIAN_POINT('',(171.95714234486,-86.96674,1.585)); +#189042 = DIRECTION('',(0.,0.,-1.)); +#189043 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#189044 = ORIENTED_EDGE('',*,*,#189045,.T.); +#189045 = EDGE_CURVE('',#189037,#189046,#189048,.T.); +#189046 = VERTEX_POINT('',#189047); +#189047 = CARTESIAN_POINT('',(172.234999,-86.90174,1.585)); +#189048 = LINE('',#189049,#189050); +#189049 = CARTESIAN_POINT('',(171.957142,-86.90174,1.585)); +#189050 = VECTOR('',#189051,1.); +#189051 = DIRECTION('',(1.,0.,0.)); +#189052 = ORIENTED_EDGE('',*,*,#189053,.T.); +#189053 = EDGE_CURVE('',#189046,#189054,#189056,.T.); +#189054 = VERTEX_POINT('',#189055); +#189055 = CARTESIAN_POINT('',(172.234999,-86.623882,1.585)); +#189056 = LINE('',#189057,#189058); +#189057 = CARTESIAN_POINT('',(172.234999,-86.90174,1.585)); +#189058 = VECTOR('',#189059,1.); +#189059 = DIRECTION('',(0.,1.,0.)); +#189060 = ORIENTED_EDGE('',*,*,#189061,.T.); +#189061 = EDGE_CURVE('',#189054,#188960,#189062,.T.); +#189062 = LINE('',#189063,#189064); +#189063 = CARTESIAN_POINT('',(172.234999,-86.623882,1.585)); +#189064 = VECTOR('',#189065,1.); +#189065 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#189066 = PLANE('',#189067); +#189067 = AXIS2_PLACEMENT_3D('',#189068,#189069,#189070); +#189068 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189069 = DIRECTION('',(0.,0.,1.)); +#189070 = DIRECTION('',(1.,0.,-0.)); +#189071 = SHELL_BASED_SURFACE_MODEL('',(#189072)); +#189072 = OPEN_SHELL('',(#189073)); +#189073 = ADVANCED_FACE('',(#189074),#189193,.T.); +#189074 = FACE_BOUND('',#189075,.F.); +#189075 = EDGE_LOOP('',(#189076,#189087,#189095,#189104,#189112,#189120, + #189128,#189137,#189145,#189153,#189161,#189170,#189178,#189187)); +#189076 = ORIENTED_EDGE('',*,*,#189077,.T.); +#189077 = EDGE_CURVE('',#189078,#189080,#189082,.T.); +#189078 = VERTEX_POINT('',#189079); +#189079 = CARTESIAN_POINT('',(199.692142,-86.309597,1.585)); +#189080 = VERTEX_POINT('',#189081); +#189081 = CARTESIAN_POINT('',(199.757142,-86.244597,1.585)); +#189082 = CIRCLE('',#189083,6.500103935393E-02); +#189083 = AXIS2_PLACEMENT_3D('',#189084,#189085,#189086); +#189084 = CARTESIAN_POINT('',(199.75714303934,-86.30959803934,1.585)); +#189085 = DIRECTION('',(0.,0.,-1.)); +#189086 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#189087 = ORIENTED_EDGE('',*,*,#189088,.T.); +#189088 = EDGE_CURVE('',#189080,#189089,#189091,.T.); +#189089 = VERTEX_POINT('',#189090); +#189090 = CARTESIAN_POINT('',(200.185714,-86.244597,1.585)); +#189091 = LINE('',#189092,#189093); +#189092 = CARTESIAN_POINT('',(199.757142,-86.244597,1.585)); +#189093 = VECTOR('',#189094,1.); +#189094 = DIRECTION('',(1.,0.,0.)); +#189095 = ORIENTED_EDGE('',*,*,#189096,.T.); +#189096 = EDGE_CURVE('',#189089,#189097,#189099,.T.); +#189097 = VERTEX_POINT('',#189098); +#189098 = CARTESIAN_POINT('',(200.185714,-86.374597,1.585)); +#189099 = CIRCLE('',#189100,6.500000000091E-02); +#189100 = AXIS2_PLACEMENT_3D('',#189101,#189102,#189103); +#189101 = CARTESIAN_POINT('',(200.18571365513,-86.309597,1.585)); +#189102 = DIRECTION('',(0.,0.,-1.)); +#189103 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#189104 = ORIENTED_EDGE('',*,*,#189105,.T.); +#189105 = EDGE_CURVE('',#189097,#189106,#189108,.T.); +#189106 = VERTEX_POINT('',#189107); +#189107 = CARTESIAN_POINT('',(199.822142,-86.374597,1.585)); +#189108 = LINE('',#189109,#189110); +#189109 = CARTESIAN_POINT('',(200.185714,-86.374597,1.585)); +#189110 = VECTOR('',#189111,1.); +#189111 = DIRECTION('',(-1.,0.,0.)); +#189112 = ORIENTED_EDGE('',*,*,#189113,.T.); +#189113 = EDGE_CURVE('',#189106,#189114,#189116,.T.); +#189114 = VERTEX_POINT('',#189115); +#189115 = CARTESIAN_POINT('',(199.822142,-86.673168,1.585)); +#189116 = LINE('',#189117,#189118); +#189117 = CARTESIAN_POINT('',(199.822142,-86.374597,1.585)); +#189118 = VECTOR('',#189119,1.); +#189119 = DIRECTION('',(0.,-1.,0.)); +#189120 = ORIENTED_EDGE('',*,*,#189121,.T.); +#189121 = EDGE_CURVE('',#189114,#189122,#189124,.T.); +#189122 = VERTEX_POINT('',#189123); +#189123 = CARTESIAN_POINT('',(200.057142,-86.673168,1.585)); +#189124 = LINE('',#189125,#189126); +#189125 = CARTESIAN_POINT('',(199.822142,-86.673168,1.585)); +#189126 = VECTOR('',#189127,1.); +#189127 = DIRECTION('',(1.,0.,0.)); +#189128 = ORIENTED_EDGE('',*,*,#189129,.T.); +#189129 = EDGE_CURVE('',#189122,#189130,#189132,.T.); +#189130 = VERTEX_POINT('',#189131); +#189131 = CARTESIAN_POINT('',(200.057142,-86.803168,1.585)); +#189132 = CIRCLE('',#189133,6.500000000091E-02); +#189133 = AXIS2_PLACEMENT_3D('',#189134,#189135,#189136); +#189134 = CARTESIAN_POINT('',(200.05714165513,-86.738168,1.585)); +#189135 = DIRECTION('',(0.,0.,-1.)); +#189136 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#189137 = ORIENTED_EDGE('',*,*,#189138,.T.); +#189138 = EDGE_CURVE('',#189130,#189139,#189141,.T.); +#189139 = VERTEX_POINT('',#189140); +#189140 = CARTESIAN_POINT('',(199.822142,-86.803168,1.585)); +#189141 = LINE('',#189142,#189143); +#189142 = CARTESIAN_POINT('',(200.057142,-86.803168,1.585)); +#189143 = VECTOR('',#189144,1.); +#189144 = DIRECTION('',(-1.,0.,0.)); +#189145 = ORIENTED_EDGE('',*,*,#189146,.T.); +#189146 = EDGE_CURVE('',#189139,#189147,#189149,.T.); +#189147 = VERTEX_POINT('',#189148); +#189148 = CARTESIAN_POINT('',(199.822142,-87.144597,1.585)); +#189149 = LINE('',#189150,#189151); +#189150 = CARTESIAN_POINT('',(199.822142,-86.803168,1.585)); +#189151 = VECTOR('',#189152,1.); +#189152 = DIRECTION('',(0.,-1.,0.)); +#189153 = ORIENTED_EDGE('',*,*,#189154,.T.); +#189154 = EDGE_CURVE('',#189147,#189155,#189157,.T.); +#189155 = VERTEX_POINT('',#189156); +#189156 = CARTESIAN_POINT('',(200.185714,-87.144597,1.585)); +#189157 = LINE('',#189158,#189159); +#189158 = CARTESIAN_POINT('',(199.822142,-87.144597,1.585)); +#189159 = VECTOR('',#189160,1.); +#189160 = DIRECTION('',(1.,0.,0.)); +#189161 = ORIENTED_EDGE('',*,*,#189162,.T.); +#189162 = EDGE_CURVE('',#189155,#189163,#189165,.T.); +#189163 = VERTEX_POINT('',#189164); +#189164 = CARTESIAN_POINT('',(200.185714,-87.274597,1.585)); +#189165 = CIRCLE('',#189166,6.500000000091E-02); +#189166 = AXIS2_PLACEMENT_3D('',#189167,#189168,#189169); +#189167 = CARTESIAN_POINT('',(200.18571365513,-87.209597,1.585)); +#189168 = DIRECTION('',(0.,0.,-1.)); +#189169 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#189170 = ORIENTED_EDGE('',*,*,#189171,.T.); +#189171 = EDGE_CURVE('',#189163,#189172,#189174,.T.); +#189172 = VERTEX_POINT('',#189173); +#189173 = CARTESIAN_POINT('',(199.757142,-87.274597,1.585)); +#189174 = LINE('',#189175,#189176); +#189175 = CARTESIAN_POINT('',(200.185714,-87.274597,1.585)); +#189176 = VECTOR('',#189177,1.); +#189177 = DIRECTION('',(-1.,0.,0.)); +#189178 = ORIENTED_EDGE('',*,*,#189179,.T.); +#189179 = EDGE_CURVE('',#189172,#189180,#189182,.T.); +#189180 = VERTEX_POINT('',#189181); +#189181 = CARTESIAN_POINT('',(199.692142,-87.209597,1.585)); +#189182 = CIRCLE('',#189183,6.500103935393E-02); +#189183 = AXIS2_PLACEMENT_3D('',#189184,#189185,#189186); +#189184 = CARTESIAN_POINT('',(199.75714303934,-87.20959596065,1.585)); +#189185 = DIRECTION('',(0.,0.,-1.)); +#189186 = DIRECTION('',(-1.598967692944E-05,-0.999999999872,-0.)); +#189187 = ORIENTED_EDGE('',*,*,#189188,.T.); +#189188 = EDGE_CURVE('',#189180,#189078,#189189,.T.); +#189189 = LINE('',#189190,#189191); +#189190 = CARTESIAN_POINT('',(199.692142,-87.209597,1.585)); +#189191 = VECTOR('',#189192,1.); +#189192 = DIRECTION('',(0.,1.,0.)); +#189193 = PLANE('',#189194); +#189194 = AXIS2_PLACEMENT_3D('',#189195,#189196,#189197); +#189195 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189196 = DIRECTION('',(0.,0.,1.)); +#189197 = DIRECTION('',(1.,0.,-0.)); +#189198 = SHELL_BASED_SURFACE_MODEL('',(#189199)); +#189199 = OPEN_SHELL('',(#189200)); +#189200 = ADVANCED_FACE('',(#189201),#189262,.T.); +#189201 = FACE_BOUND('',#189202,.F.); +#189202 = EDGE_LOOP('',(#189203,#189214,#189222,#189231,#189239,#189248, + #189256)); +#189203 = ORIENTED_EDGE('',*,*,#189204,.T.); +#189204 = EDGE_CURVE('',#189205,#189207,#189209,.T.); +#189205 = VERTEX_POINT('',#189206); +#189206 = CARTESIAN_POINT('',(198.495477,-86.289042,1.585)); +#189207 = VERTEX_POINT('',#189208); +#189208 = CARTESIAN_POINT('',(198.618806,-86.330152,1.585)); +#189209 = CIRCLE('',#189210,6.500014296398E-02); +#189210 = AXIS2_PLACEMENT_3D('',#189211,#189212,#189213); +#189211 = CARTESIAN_POINT('',(198.55714140669,-86.30959727991,1.585)); +#189212 = DIRECTION('',(0.,0.,-1.)); +#189213 = DIRECTION('',(-0.948681093355,0.316234380027,0.)); +#189214 = ORIENTED_EDGE('',*,*,#189215,.T.); +#189215 = EDGE_CURVE('',#189207,#189216,#189218,.T.); +#189216 = VERTEX_POINT('',#189217); +#189217 = CARTESIAN_POINT('',(198.318806,-87.230152,1.585)); +#189218 = LINE('',#189219,#189220); +#189219 = CARTESIAN_POINT('',(198.618806,-86.330152,1.585)); +#189220 = VECTOR('',#189221,1.); +#189221 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#189222 = ORIENTED_EDGE('',*,*,#189223,.T.); +#189223 = EDGE_CURVE('',#189216,#189224,#189226,.T.); +#189224 = VERTEX_POINT('',#189225); +#189225 = CARTESIAN_POINT('',(198.195477,-87.230152,1.585)); +#189226 = CIRCLE('',#189227,6.500043802859E-02); +#189227 = AXIS2_PLACEMENT_3D('',#189228,#189229,#189230); +#189228 = CARTESIAN_POINT('',(198.2571415,-87.20959606694,1.585)); +#189229 = DIRECTION('',(-0.,0.,-1.)); +#189230 = DIRECTION('',(0.948678222336,-0.316242992755,-0.)); +#189231 = ORIENTED_EDGE('',*,*,#189232,.T.); +#189232 = EDGE_CURVE('',#189224,#189233,#189235,.T.); +#189233 = VERTEX_POINT('',#189234); +#189234 = CARTESIAN_POINT('',(197.895478,-86.330152,1.585)); +#189235 = LINE('',#189236,#189237); +#189236 = CARTESIAN_POINT('',(198.195477,-87.230152,1.585)); +#189237 = VECTOR('',#189238,1.); +#189238 = DIRECTION('',(-0.316226817333,0.948683614278,0.)); +#189239 = ORIENTED_EDGE('',*,*,#189240,.T.); +#189240 = EDGE_CURVE('',#189233,#189241,#189243,.T.); +#189241 = VERTEX_POINT('',#189242); +#189242 = CARTESIAN_POINT('',(198.018806,-86.289042,1.585)); +#189243 = CIRCLE('',#189244,6.499966862238E-02); +#189244 = AXIS2_PLACEMENT_3D('',#189245,#189246,#189247); +#189245 = CARTESIAN_POINT('',(197.95714204307,-86.30959712923,1.585)); +#189246 = DIRECTION('',(0.,0.,-1.)); +#189247 = DIRECTION('',(-0.948682422317,-0.316230393205,-0.)); +#189248 = ORIENTED_EDGE('',*,*,#189249,.T.); +#189249 = EDGE_CURVE('',#189241,#189250,#189252,.T.); +#189250 = VERTEX_POINT('',#189251); +#189251 = CARTESIAN_POINT('',(198.257141,-87.004049,1.585)); +#189252 = LINE('',#189253,#189254); +#189253 = CARTESIAN_POINT('',(198.018806,-86.289042,1.585)); +#189254 = VECTOR('',#189255,1.); +#189255 = DIRECTION('',(0.316226969926,-0.948683563414,0.)); +#189256 = ORIENTED_EDGE('',*,*,#189257,.T.); +#189257 = EDGE_CURVE('',#189250,#189205,#189258,.T.); +#189258 = LINE('',#189259,#189260); +#189259 = CARTESIAN_POINT('',(198.257141,-87.004049,1.585)); +#189260 = VECTOR('',#189261,1.); +#189261 = DIRECTION('',(0.316228164062,0.948683165369,0.)); +#189262 = PLANE('',#189263); +#189263 = AXIS2_PLACEMENT_3D('',#189264,#189265,#189266); +#189264 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189265 = DIRECTION('',(0.,0.,1.)); +#189266 = DIRECTION('',(1.,0.,-0.)); +#189267 = SHELL_BASED_SURFACE_MODEL('',(#189268)); +#189268 = OPEN_SHELL('',(#189269)); +#189269 = ADVANCED_FACE('',(#189270,#189404),#189456,.T.); +#189270 = FACE_BOUND('',#189271,.F.); +#189271 = EDGE_LOOP('',(#189272,#189283,#189291,#189299,#189307,#189316, + #189324,#189332,#189340,#189348,#189356,#189365,#189373,#189381, + #189389,#189398)); +#189272 = ORIENTED_EDGE('',*,*,#189273,.T.); +#189273 = EDGE_CURVE('',#189274,#189276,#189278,.T.); +#189274 = VERTEX_POINT('',#189275); +#189275 = CARTESIAN_POINT('',(198.792142,-86.309597,1.585)); +#189276 = VERTEX_POINT('',#189277); +#189277 = CARTESIAN_POINT('',(198.857142,-86.244597,1.585)); +#189278 = CIRCLE('',#189279,6.500103935382E-02); +#189279 = AXIS2_PLACEMENT_3D('',#189280,#189281,#189282); +#189280 = CARTESIAN_POINT('',(198.85714303934,-86.30959803934,1.585)); +#189281 = DIRECTION('',(0.,0.,-1.)); +#189282 = DIRECTION('',(-0.999999999872,1.598967539909E-05,0.)); +#189283 = ORIENTED_EDGE('',*,*,#189284,.T.); +#189284 = EDGE_CURVE('',#189276,#189285,#189287,.T.); +#189285 = VERTEX_POINT('',#189286); +#189286 = CARTESIAN_POINT('',(199.203192,-86.245232,1.585)); +#189287 = LINE('',#189288,#189289); +#189288 = CARTESIAN_POINT('',(198.857142,-86.244597,1.585)); +#189289 = VECTOR('',#189290,1.); +#189290 = DIRECTION('',(0.999998316401,-1.834991853539E-03,0.)); +#189291 = ORIENTED_EDGE('',*,*,#189292,.T.); +#189292 = EDGE_CURVE('',#189285,#189293,#189295,.T.); +#189293 = VERTEX_POINT('',#189294); +#189294 = CARTESIAN_POINT('',(199.229068,-86.251459,1.585)); +#189295 = LINE('',#189296,#189297); +#189296 = CARTESIAN_POINT('',(199.203192,-86.245232,1.585)); +#189297 = VECTOR('',#189298,1.); +#189298 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#189299 = ORIENTED_EDGE('',*,*,#189300,.T.); +#189300 = EDGE_CURVE('',#189293,#189301,#189303,.T.); +#189301 = VERTEX_POINT('',#189302); +#189302 = CARTESIAN_POINT('',(199.331676,-86.306492,1.585)); +#189303 = LINE('',#189304,#189305); +#189304 = CARTESIAN_POINT('',(199.229068,-86.251459,1.585)); +#189305 = VECTOR('',#189306,1.); +#189306 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#189307 = ORIENTED_EDGE('',*,*,#189308,.T.); +#189308 = EDGE_CURVE('',#189301,#189309,#189311,.T.); +#189309 = VERTEX_POINT('',#189310); +#189310 = CARTESIAN_POINT('',(199.433512,-86.624253,1.585)); +#189311 = CIRCLE('',#189312,0.311668456373); +#189312 = AXIS2_PLACEMENT_3D('',#189313,#189314,#189315); +#189313 = CARTESIAN_POINT('',(199.13190146242,-86.54571440872,1.585)); +#189314 = DIRECTION('',(0.,0.,-1.)); +#189315 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#189316 = ORIENTED_EDGE('',*,*,#189317,.T.); +#189317 = EDGE_CURVE('',#189309,#189318,#189320,.T.); +#189318 = VERTEX_POINT('',#189319); +#189319 = CARTESIAN_POINT('',(199.380322,-86.732608,1.585)); +#189320 = LINE('',#189321,#189322); +#189321 = CARTESIAN_POINT('',(199.433512,-86.624253,1.585)); +#189322 = VECTOR('',#189323,1.); +#189323 = DIRECTION('',(-0.440656804576,-0.897675654444,0.)); +#189324 = ORIENTED_EDGE('',*,*,#189325,.T.); +#189325 = EDGE_CURVE('',#189318,#189326,#189328,.T.); +#189326 = VERTEX_POINT('',#189327); +#189327 = CARTESIAN_POINT('',(199.323011,-86.789919,1.585)); +#189328 = LINE('',#189329,#189330); +#189329 = CARTESIAN_POINT('',(199.380322,-86.732608,1.585)); +#189330 = VECTOR('',#189331,1.); +#189331 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#189332 = ORIENTED_EDGE('',*,*,#189333,.T.); +#189333 = EDGE_CURVE('',#189326,#189334,#189336,.T.); +#189334 = VERTEX_POINT('',#189335); +#189335 = CARTESIAN_POINT('',(199.214655,-86.843109,1.585)); +#189336 = LINE('',#189337,#189338); +#189337 = CARTESIAN_POINT('',(199.323011,-86.789919,1.585)); +#189338 = VECTOR('',#189339,1.); +#189339 = DIRECTION('',(-0.897677263112,-0.440653527492,0.)); +#189340 = ORIENTED_EDGE('',*,*,#189341,.T.); +#189341 = EDGE_CURVE('',#189334,#189342,#189344,.T.); +#189342 = VERTEX_POINT('',#189343); +#189343 = CARTESIAN_POINT('',(199.19627,-86.846025,1.585)); +#189344 = LINE('',#189345,#189346); +#189345 = CARTESIAN_POINT('',(199.214655,-86.843109,1.585)); +#189346 = VECTOR('',#189347,1.); +#189347 = DIRECTION('',(-0.987654268842,-0.15664943421,0.)); +#189348 = ORIENTED_EDGE('',*,*,#189349,.T.); +#189349 = EDGE_CURVE('',#189342,#189350,#189352,.T.); +#189350 = VERTEX_POINT('',#189351); +#189351 = CARTESIAN_POINT('',(199.424678,-87.172322,1.585)); +#189352 = LINE('',#189353,#189354); +#189353 = CARTESIAN_POINT('',(199.19627,-86.846025,1.585)); +#189354 = VECTOR('',#189355,1.); +#189355 = DIRECTION('',(0.573462512866,-0.819231802567,0.)); +#189356 = ORIENTED_EDGE('',*,*,#189357,.T.); +#189357 = EDGE_CURVE('',#189350,#189358,#189360,.T.); +#189358 = VERTEX_POINT('',#189359); +#189359 = CARTESIAN_POINT('',(199.318178,-87.246872,1.585)); +#189360 = CIRCLE('',#189361,6.499990865385E-02); +#189361 = AXIS2_PLACEMENT_3D('',#189362,#189363,#189364); +#189362 = CARTESIAN_POINT('',(199.37142805055,-87.20959707222,1.585)); +#189363 = DIRECTION('',(0.,0.,-1.)); +#189364 = DIRECTION('',(0.819231142687,0.573463455551,0.)); +#189365 = ORIENTED_EDGE('',*,*,#189366,.T.); +#189366 = EDGE_CURVE('',#189358,#189367,#189369,.T.); +#189367 = VERTEX_POINT('',#189368); +#189368 = CARTESIAN_POINT('',(199.037585,-86.846025,1.585)); +#189369 = LINE('',#189370,#189371); +#189370 = CARTESIAN_POINT('',(199.318178,-87.246872,1.585)); +#189371 = VECTOR('',#189372,1.); +#189372 = DIRECTION('',(-0.573462481528,0.819231824504,0.)); +#189373 = ORIENTED_EDGE('',*,*,#189374,.T.); +#189374 = EDGE_CURVE('',#189367,#189375,#189377,.T.); +#189375 = VERTEX_POINT('',#189376); +#189376 = CARTESIAN_POINT('',(198.922142,-86.846025,1.585)); +#189377 = LINE('',#189378,#189379); +#189378 = CARTESIAN_POINT('',(199.037585,-86.846025,1.585)); +#189379 = VECTOR('',#189380,1.); +#189380 = DIRECTION('',(-1.,0.,0.)); +#189381 = ORIENTED_EDGE('',*,*,#189382,.T.); +#189382 = EDGE_CURVE('',#189375,#189383,#189385,.T.); +#189383 = VERTEX_POINT('',#189384); +#189384 = CARTESIAN_POINT('',(198.922142,-87.209597,1.585)); +#189385 = LINE('',#189386,#189387); +#189386 = CARTESIAN_POINT('',(198.922142,-86.846025,1.585)); +#189387 = VECTOR('',#189388,1.); +#189388 = DIRECTION('',(0.,-1.,0.)); +#189389 = ORIENTED_EDGE('',*,*,#189390,.T.); +#189390 = EDGE_CURVE('',#189383,#189391,#189393,.T.); +#189391 = VERTEX_POINT('',#189392); +#189392 = CARTESIAN_POINT('',(198.792142,-87.209597,1.585)); +#189393 = CIRCLE('',#189394,6.500000000092E-02); +#189394 = AXIS2_PLACEMENT_3D('',#189395,#189396,#189397); +#189395 = CARTESIAN_POINT('',(198.857142,-87.20959665513,1.585)); +#189396 = DIRECTION('',(-0.,0.,-1.)); +#189397 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#189398 = ORIENTED_EDGE('',*,*,#189399,.T.); +#189399 = EDGE_CURVE('',#189391,#189274,#189400,.T.); +#189400 = LINE('',#189401,#189402); +#189401 = CARTESIAN_POINT('',(198.792142,-87.209597,1.585)); +#189402 = VECTOR('',#189403,1.); +#189403 = DIRECTION('',(0.,1.,0.)); +#189404 = FACE_BOUND('',#189405,.F.); +#189405 = EDGE_LOOP('',(#189406,#189417,#189425,#189433,#189441,#189450) + ); +#189406 = ORIENTED_EDGE('',*,*,#189407,.T.); +#189407 = EDGE_CURVE('',#189408,#189410,#189412,.T.); +#189408 = VERTEX_POINT('',#189409); +#189409 = CARTESIAN_POINT('',(199.306428,-86.49637,1.585)); +#189410 = VERTEX_POINT('',#189411); +#189411 = CARTESIAN_POINT('',(199.184654,-86.374597,1.585)); +#189412 = CIRCLE('',#189413,0.170996278941); +#189413 = AXIS2_PLACEMENT_3D('',#189414,#189415,#189416); +#189414 = CARTESIAN_POINT('',(199.1410777157,-86.53994764214,1.585)); +#189415 = DIRECTION('',(0.,0.,1.)); +#189416 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#189417 = ORIENTED_EDGE('',*,*,#189418,.T.); +#189418 = EDGE_CURVE('',#189410,#189419,#189421,.T.); +#189419 = VERTEX_POINT('',#189420); +#189420 = CARTESIAN_POINT('',(198.922142,-86.374597,1.585)); +#189421 = LINE('',#189422,#189423); +#189422 = CARTESIAN_POINT('',(199.184654,-86.374597,1.585)); +#189423 = VECTOR('',#189424,1.); +#189424 = DIRECTION('',(-1.,0.,0.)); +#189425 = ORIENTED_EDGE('',*,*,#189426,.T.); +#189426 = EDGE_CURVE('',#189419,#189427,#189429,.T.); +#189427 = VERTEX_POINT('',#189428); +#189428 = CARTESIAN_POINT('',(198.922142,-86.716025,1.585)); +#189429 = LINE('',#189430,#189431); +#189430 = CARTESIAN_POINT('',(198.922142,-86.374597,1.585)); +#189431 = VECTOR('',#189432,1.); +#189432 = DIRECTION('',(0.,-1.,0.)); +#189433 = ORIENTED_EDGE('',*,*,#189434,.T.); +#189434 = EDGE_CURVE('',#189427,#189435,#189437,.T.); +#189435 = VERTEX_POINT('',#189436); +#189436 = CARTESIAN_POINT('',(199.184654,-86.716025,1.585)); +#189437 = LINE('',#189438,#189439); +#189438 = CARTESIAN_POINT('',(198.922142,-86.716025,1.585)); +#189439 = VECTOR('',#189440,1.); +#189440 = DIRECTION('',(1.,0.,0.)); +#189441 = ORIENTED_EDGE('',*,*,#189442,.T.); +#189442 = EDGE_CURVE('',#189435,#189443,#189445,.T.); +#189443 = VERTEX_POINT('',#189444); +#189444 = CARTESIAN_POINT('',(199.306428,-86.594252,1.585)); +#189445 = CIRCLE('',#189446,0.171001125777); +#189446 = AXIS2_PLACEMENT_3D('',#189447,#189448,#189449); +#189447 = CARTESIAN_POINT('',(199.14107374885,-86.55067039097,1.585)); +#189448 = DIRECTION('',(0.,0.,1.)); +#189449 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#189450 = ORIENTED_EDGE('',*,*,#189451,.T.); +#189451 = EDGE_CURVE('',#189443,#189408,#189452,.T.); +#189452 = LINE('',#189453,#189454); +#189453 = CARTESIAN_POINT('',(199.306428,-86.594252,1.585)); +#189454 = VECTOR('',#189455,1.); +#189455 = DIRECTION('',(0.,1.,0.)); +#189456 = PLANE('',#189457); +#189457 = AXIS2_PLACEMENT_3D('',#189458,#189459,#189460); +#189458 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189459 = DIRECTION('',(0.,0.,1.)); +#189460 = DIRECTION('',(1.,0.,-0.)); +#189461 = SHELL_BASED_SURFACE_MODEL('',(#189462)); +#189462 = OPEN_SHELL('',(#189463)); +#189463 = ADVANCED_FACE('',(#189464),#189558,.T.); +#189464 = FACE_BOUND('',#189465,.F.); +#189465 = EDGE_LOOP('',(#189466,#189477,#189485,#189494,#189502,#189510, + #189518,#189527,#189535,#189543,#189552)); +#189466 = ORIENTED_EDGE('',*,*,#189467,.T.); +#189467 = EDGE_CURVE('',#189468,#189470,#189472,.T.); +#189468 = VERTEX_POINT('',#189469); +#189469 = CARTESIAN_POINT('',(200.506428,-86.309597,1.585)); +#189470 = VERTEX_POINT('',#189471); +#189471 = CARTESIAN_POINT('',(200.571428,-86.244597,1.585)); +#189472 = CIRCLE('',#189473,6.500103935393E-02); +#189473 = AXIS2_PLACEMENT_3D('',#189474,#189475,#189476); +#189474 = CARTESIAN_POINT('',(200.57142903934,-86.30959803934,1.585)); +#189475 = DIRECTION('',(0.,0.,-1.)); +#189476 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#189477 = ORIENTED_EDGE('',*,*,#189478,.T.); +#189478 = EDGE_CURVE('',#189470,#189479,#189481,.T.); +#189479 = VERTEX_POINT('',#189480); +#189480 = CARTESIAN_POINT('',(201.,-86.244597,1.585)); +#189481 = LINE('',#189482,#189483); +#189482 = CARTESIAN_POINT('',(200.571428,-86.244597,1.585)); +#189483 = VECTOR('',#189484,1.); +#189484 = DIRECTION('',(1.,0.,0.)); +#189485 = ORIENTED_EDGE('',*,*,#189486,.T.); +#189486 = EDGE_CURVE('',#189479,#189487,#189489,.T.); +#189487 = VERTEX_POINT('',#189488); +#189488 = CARTESIAN_POINT('',(201.,-86.374597,1.585)); +#189489 = CIRCLE('',#189490,6.500000000091E-02); +#189490 = AXIS2_PLACEMENT_3D('',#189491,#189492,#189493); +#189491 = CARTESIAN_POINT('',(200.99999965513,-86.309597,1.585)); +#189492 = DIRECTION('',(0.,0.,-1.)); +#189493 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#189494 = ORIENTED_EDGE('',*,*,#189495,.T.); +#189495 = EDGE_CURVE('',#189487,#189496,#189498,.T.); +#189496 = VERTEX_POINT('',#189497); +#189497 = CARTESIAN_POINT('',(200.636428,-86.374597,1.585)); +#189498 = LINE('',#189499,#189500); +#189499 = CARTESIAN_POINT('',(201.,-86.374597,1.585)); +#189500 = VECTOR('',#189501,1.); +#189501 = DIRECTION('',(-1.,0.,0.)); +#189502 = ORIENTED_EDGE('',*,*,#189503,.T.); +#189503 = EDGE_CURVE('',#189496,#189504,#189506,.T.); +#189504 = VERTEX_POINT('',#189505); +#189505 = CARTESIAN_POINT('',(200.636428,-86.673168,1.585)); +#189506 = LINE('',#189507,#189508); +#189507 = CARTESIAN_POINT('',(200.636428,-86.374597,1.585)); +#189508 = VECTOR('',#189509,1.); +#189509 = DIRECTION('',(0.,-1.,0.)); +#189510 = ORIENTED_EDGE('',*,*,#189511,.T.); +#189511 = EDGE_CURVE('',#189504,#189512,#189514,.T.); +#189512 = VERTEX_POINT('',#189513); +#189513 = CARTESIAN_POINT('',(200.871428,-86.673168,1.585)); +#189514 = LINE('',#189515,#189516); +#189515 = CARTESIAN_POINT('',(200.636428,-86.673168,1.585)); +#189516 = VECTOR('',#189517,1.); +#189517 = DIRECTION('',(1.,0.,0.)); +#189518 = ORIENTED_EDGE('',*,*,#189519,.T.); +#189519 = EDGE_CURVE('',#189512,#189520,#189522,.T.); +#189520 = VERTEX_POINT('',#189521); +#189521 = CARTESIAN_POINT('',(200.871428,-86.803168,1.585)); +#189522 = CIRCLE('',#189523,6.500000000091E-02); +#189523 = AXIS2_PLACEMENT_3D('',#189524,#189525,#189526); +#189524 = CARTESIAN_POINT('',(200.87142765513,-86.738168,1.585)); +#189525 = DIRECTION('',(0.,0.,-1.)); +#189526 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#189527 = ORIENTED_EDGE('',*,*,#189528,.T.); +#189528 = EDGE_CURVE('',#189520,#189529,#189531,.T.); +#189529 = VERTEX_POINT('',#189530); +#189530 = CARTESIAN_POINT('',(200.636428,-86.803168,1.585)); +#189531 = LINE('',#189532,#189533); +#189532 = CARTESIAN_POINT('',(200.871428,-86.803168,1.585)); +#189533 = VECTOR('',#189534,1.); +#189534 = DIRECTION('',(-1.,0.,0.)); +#189535 = ORIENTED_EDGE('',*,*,#189536,.T.); +#189536 = EDGE_CURVE('',#189529,#189537,#189539,.T.); +#189537 = VERTEX_POINT('',#189538); +#189538 = CARTESIAN_POINT('',(200.636428,-87.209597,1.585)); +#189539 = LINE('',#189540,#189541); +#189540 = CARTESIAN_POINT('',(200.636428,-86.803168,1.585)); +#189541 = VECTOR('',#189542,1.); +#189542 = DIRECTION('',(0.,-1.,0.)); +#189543 = ORIENTED_EDGE('',*,*,#189544,.T.); +#189544 = EDGE_CURVE('',#189537,#189545,#189547,.T.); +#189545 = VERTEX_POINT('',#189546); +#189546 = CARTESIAN_POINT('',(200.506428,-87.209597,1.585)); +#189547 = CIRCLE('',#189548,6.500000000092E-02); +#189548 = AXIS2_PLACEMENT_3D('',#189549,#189550,#189551); +#189549 = CARTESIAN_POINT('',(200.571428,-87.20959665513,1.585)); +#189550 = DIRECTION('',(-0.,0.,-1.)); +#189551 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#189552 = ORIENTED_EDGE('',*,*,#189553,.T.); +#189553 = EDGE_CURVE('',#189545,#189468,#189554,.T.); +#189554 = LINE('',#189555,#189556); +#189555 = CARTESIAN_POINT('',(200.506428,-87.209597,1.585)); +#189556 = VECTOR('',#189557,1.); +#189557 = DIRECTION('',(0.,1.,0.)); +#189558 = PLANE('',#189559); +#189559 = AXIS2_PLACEMENT_3D('',#189560,#189561,#189562); +#189560 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189561 = DIRECTION('',(0.,0.,1.)); +#189562 = DIRECTION('',(1.,0.,-0.)); +#189563 = SHELL_BASED_SURFACE_MODEL('',(#189564)); +#189564 = OPEN_SHELL('',(#189565)); +#189565 = ADVANCED_FACE('',(#189566),#189700,.T.); +#189566 = FACE_BOUND('',#189567,.F.); +#189567 = EDGE_LOOP('',(#189568,#189578,#189586,#189595,#189603,#189611, + #189620,#189628,#189637,#189645,#189653,#189661,#189669,#189678, + #189686,#189694)); +#189568 = ORIENTED_EDGE('',*,*,#189569,.T.); +#189569 = EDGE_CURVE('',#189570,#189572,#189574,.T.); +#189570 = VERTEX_POINT('',#189571); +#189571 = CARTESIAN_POINT('',(101.114752,-85.894941,1.585)); +#189572 = VERTEX_POINT('',#189573); +#189573 = CARTESIAN_POINT('',(101.153208,-85.87436,1.585)); +#189574 = LINE('',#189575,#189576); +#189575 = CARTESIAN_POINT('',(101.114752,-85.894941,1.585)); +#189576 = VECTOR('',#189577,1.); +#189577 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#189578 = ORIENTED_EDGE('',*,*,#189579,.T.); +#189579 = EDGE_CURVE('',#189572,#189580,#189582,.T.); +#189580 = VERTEX_POINT('',#189581); +#189581 = CARTESIAN_POINT('',(101.175045,-85.87436,1.585)); +#189582 = LINE('',#189583,#189584); +#189583 = CARTESIAN_POINT('',(101.153208,-85.87436,1.585)); +#189584 = VECTOR('',#189585,1.); +#189585 = DIRECTION('',(1.,0.,0.)); +#189586 = ORIENTED_EDGE('',*,*,#189587,.T.); +#189587 = EDGE_CURVE('',#189580,#189588,#189590,.T.); +#189588 = VERTEX_POINT('',#189589); +#189589 = CARTESIAN_POINT('',(101.24284,-85.947919,1.585)); +#189590 = CIRCLE('',#189591,7.21689809423E-02); +#189591 = AXIS2_PLACEMENT_3D('',#189592,#189593,#189594); +#189592 = CARTESIAN_POINT('',(101.17068706389,-85.94639728342,1.585)); +#189593 = DIRECTION('',(0.,0.,-1.)); +#189594 = DIRECTION('',(6.038516895283E-02,0.998175150648,0.)); +#189595 = ORIENTED_EDGE('',*,*,#189596,.T.); +#189596 = EDGE_CURVE('',#189588,#189597,#189599,.T.); +#189597 = VERTEX_POINT('',#189598); +#189598 = CARTESIAN_POINT('',(101.24284,-86.872919,1.585)); +#189599 = LINE('',#189600,#189601); +#189600 = CARTESIAN_POINT('',(101.24284,-85.947919,1.585)); +#189601 = VECTOR('',#189602,1.); +#189602 = DIRECTION('',(0.,-1.,0.)); +#189603 = ORIENTED_EDGE('',*,*,#189604,.T.); +#189604 = EDGE_CURVE('',#189597,#189605,#189607,.T.); +#189605 = VERTEX_POINT('',#189606); +#189606 = CARTESIAN_POINT('',(101.468186,-86.87436,1.585)); +#189607 = LINE('',#189608,#189609); +#189608 = CARTESIAN_POINT('',(101.24284,-86.872919,1.585)); +#189609 = VECTOR('',#189610,1.); +#189610 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#189611 = ORIENTED_EDGE('',*,*,#189612,.T.); +#189612 = EDGE_CURVE('',#189605,#189613,#189615,.T.); +#189613 = VERTEX_POINT('',#189614); +#189614 = CARTESIAN_POINT('',(101.453554,-87.022919,1.585)); +#189615 = CIRCLE('',#189616,7.500006711464E-02); +#189616 = AXIS2_PLACEMENT_3D('',#189617,#189618,#189619); +#189617 = CARTESIAN_POINT('',(101.45355406711,-86.94791893288,1.585)); +#189618 = DIRECTION('',(0.,0.,-1.)); +#189619 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#189620 = ORIENTED_EDGE('',*,*,#189621,.T.); +#189621 = EDGE_CURVE('',#189613,#189622,#189624,.T.); +#189622 = VERTEX_POINT('',#189623); +#189623 = CARTESIAN_POINT('',(100.867494,-87.021478,1.585)); +#189624 = LINE('',#189625,#189626); +#189625 = CARTESIAN_POINT('',(101.453554,-87.022919,1.585)); +#189626 = VECTOR('',#189627,1.); +#189627 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#189628 = ORIENTED_EDGE('',*,*,#189629,.T.); +#189629 = EDGE_CURVE('',#189622,#189630,#189632,.T.); +#189630 = VERTEX_POINT('',#189631); +#189631 = CARTESIAN_POINT('',(100.882126,-86.872919,1.585)); +#189632 = CIRCLE('',#189633,7.500006711465E-02); +#189633 = AXIS2_PLACEMENT_3D('',#189634,#189635,#189636); +#189634 = CARTESIAN_POINT('',(100.88212593288,-86.94791906711,1.585)); +#189635 = DIRECTION('',(0.,0.,-1.)); +#189636 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#189637 = ORIENTED_EDGE('',*,*,#189638,.T.); +#189638 = EDGE_CURVE('',#189630,#189639,#189641,.T.); +#189639 = VERTEX_POINT('',#189640); +#189640 = CARTESIAN_POINT('',(101.09284,-86.872919,1.585)); +#189641 = LINE('',#189642,#189643); +#189642 = CARTESIAN_POINT('',(100.882126,-86.872919,1.585)); +#189643 = VECTOR('',#189644,1.); +#189644 = DIRECTION('',(1.,0.,0.)); +#189645 = ORIENTED_EDGE('',*,*,#189646,.T.); +#189646 = EDGE_CURVE('',#189639,#189647,#189649,.T.); +#189647 = VERTEX_POINT('',#189648); +#189648 = CARTESIAN_POINT('',(101.09284,-86.176604,1.585)); +#189649 = LINE('',#189650,#189651); +#189650 = CARTESIAN_POINT('',(101.09284,-86.872919,1.585)); +#189651 = VECTOR('',#189652,1.); +#189652 = DIRECTION('',(0.,1.,0.)); +#189653 = ORIENTED_EDGE('',*,*,#189654,.T.); +#189654 = EDGE_CURVE('',#189647,#189655,#189657,.T.); +#189655 = VERTEX_POINT('',#189656); +#189656 = CARTESIAN_POINT('',(101.017204,-86.249131,1.585)); +#189657 = LINE('',#189658,#189659); +#189658 = CARTESIAN_POINT('',(101.09284,-86.176604,1.585)); +#189659 = VECTOR('',#189660,1.); +#189660 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#189661 = ORIENTED_EDGE('',*,*,#189662,.T.); +#189662 = EDGE_CURVE('',#189655,#189663,#189665,.T.); +#189663 = VERTEX_POINT('',#189664); +#189664 = CARTESIAN_POINT('',(100.901935,-86.30597,1.585)); +#189665 = LINE('',#189666,#189667); +#189666 = CARTESIAN_POINT('',(101.017204,-86.249131,1.585)); +#189667 = VECTOR('',#189668,1.); +#189668 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#189669 = ORIENTED_EDGE('',*,*,#189670,.T.); +#189670 = EDGE_CURVE('',#189663,#189671,#189673,.T.); +#189671 = VERTEX_POINT('',#189672); +#189672 = CARTESIAN_POINT('',(100.848585,-86.166551,1.585)); +#189673 = CIRCLE('',#189674,7.500005272361E-02); +#189674 = AXIS2_PLACEMENT_3D('',#189675,#189676,#189677); +#189675 = CARTESIAN_POINT('',(100.88212555676,-86.23363332972,1.585)); +#189676 = DIRECTION('',(0.,0.,-1.)); +#189677 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#189678 = ORIENTED_EDGE('',*,*,#189679,.T.); +#189679 = EDGE_CURVE('',#189671,#189680,#189682,.T.); +#189680 = VERTEX_POINT('',#189681); +#189681 = CARTESIAN_POINT('',(100.932937,-86.124375,1.585)); +#189682 = LINE('',#189683,#189684); +#189683 = CARTESIAN_POINT('',(100.848585,-86.166551,1.585)); +#189684 = VECTOR('',#189685,1.); +#189685 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#189686 = ORIENTED_EDGE('',*,*,#189687,.T.); +#189687 = EDGE_CURVE('',#189680,#189688,#189690,.T.); +#189688 = VERTEX_POINT('',#189689); +#189689 = CARTESIAN_POINT('',(101.014316,-86.042996,1.585)); +#189690 = LINE('',#189691,#189692); +#189691 = CARTESIAN_POINT('',(100.932937,-86.124375,1.585)); +#189692 = VECTOR('',#189693,1.); +#189693 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#189694 = ORIENTED_EDGE('',*,*,#189695,.T.); +#189695 = EDGE_CURVE('',#189688,#189570,#189696,.T.); +#189696 = LINE('',#189697,#189698); +#189697 = CARTESIAN_POINT('',(101.014316,-86.042996,1.585)); +#189698 = VECTOR('',#189699,1.); +#189699 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#189700 = PLANE('',#189701); +#189701 = AXIS2_PLACEMENT_3D('',#189702,#189703,#189704); +#189702 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189703 = DIRECTION('',(0.,0.,1.)); +#189704 = DIRECTION('',(1.,0.,-0.)); +#189705 = SHELL_BASED_SURFACE_MODEL('',(#189706)); +#189706 = OPEN_SHELL('',(#189707)); +#189707 = ADVANCED_FACE('',(#189708,#189819),#189871,.T.); +#189708 = FACE_BOUND('',#189709,.F.); +#189709 = EDGE_LOOP('',(#189710,#189721,#189729,#189738,#189746,#189755, + #189763,#189771,#189780,#189788,#189796,#189804,#189813)); +#189710 = ORIENTED_EDGE('',*,*,#189711,.T.); +#189711 = EDGE_CURVE('',#189712,#189714,#189716,.T.); +#189712 = VERTEX_POINT('',#189713); +#189713 = CARTESIAN_POINT('',(98.903805,-85.933287,1.585)); +#189714 = VERTEX_POINT('',#189715); +#189715 = CARTESIAN_POINT('',(98.977364,-85.872919,1.585)); +#189716 = CIRCLE('',#189717,7.500074938981E-02); +#189717 = AXIS2_PLACEMENT_3D('',#189718,#189719,#189720); +#189718 = CARTESIAN_POINT('',(98.97736446611,-85.94791974938,1.585)); +#189719 = DIRECTION('',(0.,0.,-1.)); +#189720 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#189721 = ORIENTED_EDGE('',*,*,#189722,.T.); +#189722 = EDGE_CURVE('',#189714,#189723,#189725,.T.); +#189723 = VERTEX_POINT('',#189724); +#189724 = CARTESIAN_POINT('',(99.372948,-85.87436,1.585)); +#189725 = LINE('',#189726,#189727); +#189726 = CARTESIAN_POINT('',(98.977364,-85.872919,1.585)); +#189727 = VECTOR('',#189728,1.); +#189728 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#189729 = ORIENTED_EDGE('',*,*,#189730,.T.); +#189730 = EDGE_CURVE('',#189723,#189731,#189733,.T.); +#189731 = VERTEX_POINT('',#189732); +#189732 = CARTESIAN_POINT('',(99.622351,-86.123763,1.585)); +#189733 = CIRCLE('',#189734,0.347870264855); +#189734 = AXIS2_PLACEMENT_3D('',#189735,#189736,#189737); +#189735 = CARTESIAN_POINT('',(99.285620265028,-86.21109073497,1.585)); +#189736 = DIRECTION('',(0.,0.,-1.)); +#189737 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#189738 = ORIENTED_EDGE('',*,*,#189739,.T.); +#189739 = EDGE_CURVE('',#189731,#189740,#189742,.T.); +#189740 = VERTEX_POINT('',#189741); +#189741 = CARTESIAN_POINT('',(99.621129,-86.301062,1.585)); +#189742 = LINE('',#189743,#189744); +#189743 = CARTESIAN_POINT('',(99.622351,-86.123763,1.585)); +#189744 = VECTOR('',#189745,1.); +#189745 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#189746 = ORIENTED_EDGE('',*,*,#189747,.T.); +#189747 = EDGE_CURVE('',#189740,#189748,#189750,.T.); +#189748 = VERTEX_POINT('',#189749); +#189749 = CARTESIAN_POINT('',(99.372948,-86.545287,1.585)); +#189750 = CIRCLE('',#189751,0.348632345848); +#189751 = AXIS2_PLACEMENT_3D('',#189752,#189753,#189754); +#189752 = CARTESIAN_POINT('',(99.285179194037,-86.2078834593,1.585)); +#189753 = DIRECTION('',(0.,0.,-1.)); +#189754 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#189755 = ORIENTED_EDGE('',*,*,#189756,.T.); +#189756 = EDGE_CURVE('',#189748,#189757,#189759,.T.); +#189757 = VERTEX_POINT('',#189758); +#189758 = CARTESIAN_POINT('',(99.359431,-86.546618,1.585)); +#189759 = LINE('',#189760,#189761); +#189760 = CARTESIAN_POINT('',(99.372948,-86.545287,1.585)); +#189761 = VECTOR('',#189762,1.); +#189762 = DIRECTION('',(-0.995186940545,-9.799465989934E-02,0.)); +#189763 = ORIENTED_EDGE('',*,*,#189764,.T.); +#189764 = EDGE_CURVE('',#189757,#189765,#189767,.T.); +#189765 = VERTEX_POINT('',#189766); +#189766 = CARTESIAN_POINT('',(99.617445,-86.917723,1.585)); +#189767 = LINE('',#189768,#189769); +#189768 = CARTESIAN_POINT('',(99.359431,-86.546618,1.585)); +#189769 = VECTOR('',#189770,1.); +#189770 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#189771 = ORIENTED_EDGE('',*,*,#189772,.T.); +#189772 = EDGE_CURVE('',#189765,#189773,#189775,.T.); +#189773 = VERTEX_POINT('',#189774); +#189774 = CARTESIAN_POINT('',(99.48735,-86.990929,1.585)); +#189775 = CIRCLE('',#189776,7.500005951702E-02); +#189776 = AXIS2_PLACEMENT_3D('',#189777,#189778,#189779); +#189777 = CARTESIAN_POINT('',(99.548792062942,-86.94791874739,1.585)); +#189778 = DIRECTION('',(0.,0.,-1.)); +#189779 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#189780 = ORIENTED_EDGE('',*,*,#189781,.T.); +#189781 = EDGE_CURVE('',#189773,#189782,#189784,.T.); +#189782 = VERTEX_POINT('',#189783); +#189783 = CARTESIAN_POINT('',(99.17641,-86.546728,1.585)); +#189784 = LINE('',#189785,#189786); +#189785 = CARTESIAN_POINT('',(99.48735,-86.990929,1.585)); +#189786 = VECTOR('',#189787,1.); +#189787 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#189788 = ORIENTED_EDGE('',*,*,#189789,.T.); +#189789 = EDGE_CURVE('',#189782,#189790,#189792,.T.); +#189790 = VERTEX_POINT('',#189791); +#189791 = CARTESIAN_POINT('',(99.052364,-86.546728,1.585)); +#189792 = LINE('',#189793,#189794); +#189793 = CARTESIAN_POINT('',(99.17641,-86.546728,1.585)); +#189794 = VECTOR('',#189795,1.); +#189795 = DIRECTION('',(-1.,0.,0.)); +#189796 = ORIENTED_EDGE('',*,*,#189797,.T.); +#189797 = EDGE_CURVE('',#189790,#189798,#189800,.T.); +#189798 = VERTEX_POINT('',#189799); +#189799 = CARTESIAN_POINT('',(99.050923,-86.962551,1.585)); +#189800 = LINE('',#189801,#189802); +#189801 = CARTESIAN_POINT('',(99.052364,-86.546728,1.585)); +#189802 = VECTOR('',#189803,1.); +#189803 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#189804 = ORIENTED_EDGE('',*,*,#189805,.T.); +#189805 = EDGE_CURVE('',#189798,#189806,#189808,.T.); +#189806 = VERTEX_POINT('',#189807); +#189807 = CARTESIAN_POINT('',(98.902364,-86.947919,1.585)); +#189808 = CIRCLE('',#189809,7.500006711463E-02); +#189809 = AXIS2_PLACEMENT_3D('',#189810,#189811,#189812); +#189810 = CARTESIAN_POINT('',(98.977364067115,-86.94791906711,1.585)); +#189811 = DIRECTION('',(-0.,0.,-1.)); +#189812 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#189813 = ORIENTED_EDGE('',*,*,#189814,.T.); +#189814 = EDGE_CURVE('',#189806,#189712,#189815,.T.); +#189815 = LINE('',#189816,#189817); +#189816 = CARTESIAN_POINT('',(98.902364,-86.947919,1.585)); +#189817 = VECTOR('',#189818,1.); +#189818 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#189819 = FACE_BOUND('',#189820,.F.); +#189820 = EDGE_LOOP('',(#189821,#189832,#189840,#189848,#189856,#189865) + ); +#189821 = ORIENTED_EDGE('',*,*,#189822,.T.); +#189822 = EDGE_CURVE('',#189823,#189825,#189827,.T.); +#189823 = VERTEX_POINT('',#189824); +#189824 = CARTESIAN_POINT('',(99.473792,-86.1561,1.585)); +#189825 = VERTEX_POINT('',#189826); +#189826 = CARTESIAN_POINT('',(99.340611,-86.022919,1.585)); +#189827 = CIRCLE('',#189828,0.18686440374); +#189828 = AXIS2_PLACEMENT_3D('',#189829,#189830,#189831); +#189829 = CARTESIAN_POINT('',(99.293075,-86.203636,1.585)); +#189830 = DIRECTION('',(0.,0.,1.)); +#189831 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#189832 = ORIENTED_EDGE('',*,*,#189833,.T.); +#189833 = EDGE_CURVE('',#189825,#189834,#189836,.T.); +#189834 = VERTEX_POINT('',#189835); +#189835 = CARTESIAN_POINT('',(99.052364,-86.022919,1.585)); +#189836 = LINE('',#189837,#189838); +#189837 = CARTESIAN_POINT('',(99.340611,-86.022919,1.585)); +#189838 = VECTOR('',#189839,1.); +#189839 = DIRECTION('',(-1.,0.,0.)); +#189840 = ORIENTED_EDGE('',*,*,#189841,.T.); +#189841 = EDGE_CURVE('',#189834,#189842,#189844,.T.); +#189842 = VERTEX_POINT('',#189843); +#189843 = CARTESIAN_POINT('',(99.052364,-86.396728,1.585)); +#189844 = LINE('',#189845,#189846); +#189845 = CARTESIAN_POINT('',(99.052364,-86.022919,1.585)); +#189846 = VECTOR('',#189847,1.); +#189847 = DIRECTION('',(0.,-1.,0.)); +#189848 = ORIENTED_EDGE('',*,*,#189849,.T.); +#189849 = EDGE_CURVE('',#189842,#189850,#189852,.T.); +#189850 = VERTEX_POINT('',#189851); +#189851 = CARTESIAN_POINT('',(99.340611,-86.396728,1.585)); +#189852 = LINE('',#189853,#189854); +#189853 = CARTESIAN_POINT('',(99.052364,-86.396728,1.585)); +#189854 = VECTOR('',#189855,1.); +#189855 = DIRECTION('',(1.,0.,0.)); +#189856 = ORIENTED_EDGE('',*,*,#189857,.T.); +#189857 = EDGE_CURVE('',#189850,#189858,#189860,.T.); +#189858 = VERTEX_POINT('',#189859); +#189859 = CARTESIAN_POINT('',(99.473792,-86.263547,1.585)); +#189860 = CIRCLE('',#189861,0.18686440374); +#189861 = AXIS2_PLACEMENT_3D('',#189862,#189863,#189864); +#189862 = CARTESIAN_POINT('',(99.293075,-86.216011,1.585)); +#189863 = DIRECTION('',(0.,0.,1.)); +#189864 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#189865 = ORIENTED_EDGE('',*,*,#189866,.T.); +#189866 = EDGE_CURVE('',#189858,#189823,#189867,.T.); +#189867 = LINE('',#189868,#189869); +#189868 = CARTESIAN_POINT('',(99.473792,-86.263547,1.585)); +#189869 = VECTOR('',#189870,1.); +#189870 = DIRECTION('',(0.,1.,0.)); +#189871 = PLANE('',#189872); +#189872 = AXIS2_PLACEMENT_3D('',#189873,#189874,#189875); +#189873 = CARTESIAN_POINT('',(0.,0.,1.585)); +#189874 = DIRECTION('',(0.,0.,1.)); +#189875 = DIRECTION('',(1.,0.,-0.)); +#189876 = SHELL_BASED_SURFACE_MODEL('',(#189877)); +#189877 = OPEN_SHELL('',(#189878)); +#189878 = ADVANCED_FACE('',(#189879),#190143,.T.); +#189879 = FACE_BOUND('',#189880,.F.); +#189880 = EDGE_LOOP('',(#189881,#189891,#189899,#189907,#189916,#189924, + #189932,#189941,#189949,#189957,#189965,#189973,#189981,#189989, + #189997,#190006,#190014,#190022,#190030,#190038,#190047,#190055, + #190063,#190072,#190080,#190088,#190096,#190104,#190112,#190120, + #190128,#190137)); +#189881 = ORIENTED_EDGE('',*,*,#189882,.T.); +#189882 = EDGE_CURVE('',#189883,#189885,#189887,.T.); +#189883 = VERTEX_POINT('',#189884); +#189884 = CARTESIAN_POINT('',(99.985142,-85.93242,1.585)); +#189885 = VERTEX_POINT('',#189886); +#189886 = CARTESIAN_POINT('',(100.105589,-85.87436,1.585)); +#189887 = LINE('',#189888,#189889); +#189888 = CARTESIAN_POINT('',(99.985142,-85.93242,1.585)); +#189889 = VECTOR('',#189890,1.); +#189890 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#189891 = ORIENTED_EDGE('',*,*,#189892,.T.); +#189892 = EDGE_CURVE('',#189885,#189893,#189895,.T.); +#189893 = VERTEX_POINT('',#189894); +#189894 = CARTESIAN_POINT('',(100.365721,-85.873648,1.585)); +#189895 = LINE('',#189896,#189897); +#189896 = CARTESIAN_POINT('',(100.105589,-85.87436,1.585)); +#189897 = VECTOR('',#189898,1.); +#189898 = DIRECTION('',(0.99999625424,2.737061695645E-03,0.)); +#189899 = ORIENTED_EDGE('',*,*,#189900,.T.); +#189900 = EDGE_CURVE('',#189893,#189901,#189903,.T.); +#189901 = VERTEX_POINT('',#189902); +#189902 = CARTESIAN_POINT('',(100.538315,-85.930381,1.585)); +#189903 = LINE('',#189904,#189905); +#189904 = CARTESIAN_POINT('',(100.365721,-85.873648,1.585)); +#189905 = VECTOR('',#189906,1.); +#189906 = DIRECTION('',(0.949993312755,-0.312270244693,0.)); +#189907 = ORIENTED_EDGE('',*,*,#189908,.T.); +#189908 = EDGE_CURVE('',#189901,#189909,#189911,.T.); +#189909 = VERTEX_POINT('',#189910); +#189910 = CARTESIAN_POINT('',(100.477455,-86.066689,1.585)); +#189911 = CIRCLE('',#189912,7.499990197505E-02); +#189912 = AXIS2_PLACEMENT_3D('',#189913,#189914,#189915); +#189913 = CARTESIAN_POINT('',(100.50117295478,-85.99553814675,1.585)); +#189914 = DIRECTION('',(0.,0.,-1.)); +#189915 = DIRECTION('',(0.495227916747,0.868763092261,0.)); +#189916 = ORIENTED_EDGE('',*,*,#189917,.T.); +#189917 = EDGE_CURVE('',#189909,#189918,#189920,.T.); +#189918 = VERTEX_POINT('',#189919); +#189919 = CARTESIAN_POINT('',(100.346146,-86.022919,1.585)); +#189920 = LINE('',#189921,#189922); +#189921 = CARTESIAN_POINT('',(100.477455,-86.066689,1.585)); +#189922 = VECTOR('',#189923,1.); +#189923 = DIRECTION('',(-0.948682575567,0.316229933459,0.)); +#189924 = ORIENTED_EDGE('',*,*,#189925,.T.); +#189925 = EDGE_CURVE('',#189918,#189926,#189928,.T.); +#189926 = VERTEX_POINT('',#189927); +#189927 = CARTESIAN_POINT('',(100.137926,-86.022919,1.585)); +#189928 = LINE('',#189929,#189930); +#189929 = CARTESIAN_POINT('',(100.346146,-86.022919,1.585)); +#189930 = VECTOR('',#189931,1.); +#189931 = DIRECTION('',(-1.,0.,0.)); +#189932 = ORIENTED_EDGE('',*,*,#189933,.T.); +#189933 = EDGE_CURVE('',#189926,#189934,#189936,.T.); +#189934 = VERTEX_POINT('',#189935); +#189935 = CARTESIAN_POINT('',(100.004745,-86.1561,1.585)); +#189936 = CIRCLE('',#189937,0.18686440374); +#189937 = AXIS2_PLACEMENT_3D('',#189938,#189939,#189940); +#189938 = CARTESIAN_POINT('',(100.185462,-86.203636,1.585)); +#189939 = DIRECTION('',(0.,0.,1.)); +#189940 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#189941 = ORIENTED_EDGE('',*,*,#189942,.T.); +#189942 = EDGE_CURVE('',#189934,#189943,#189945,.T.); +#189943 = VERTEX_POINT('',#189944); +#189944 = CARTESIAN_POINT('',(100.004745,-86.215928,1.585)); +#189945 = LINE('',#189946,#189947); +#189946 = CARTESIAN_POINT('',(100.004745,-86.1561,1.585)); +#189947 = VECTOR('',#189948,1.); +#189948 = DIRECTION('',(0.,-1.,0.)); +#189949 = ORIENTED_EDGE('',*,*,#189950,.T.); +#189950 = EDGE_CURVE('',#189943,#189951,#189953,.T.); +#189951 = VERTEX_POINT('',#189952); +#189952 = CARTESIAN_POINT('',(100.039003,-86.284444,1.585)); +#189953 = LINE('',#189954,#189955); +#189954 = CARTESIAN_POINT('',(100.004745,-86.215928,1.585)); +#189955 = VECTOR('',#189956,1.); +#189956 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#189957 = ORIENTED_EDGE('',*,*,#189958,.T.); +#189958 = EDGE_CURVE('',#189951,#189959,#189961,.T.); +#189959 = VERTEX_POINT('',#189960); +#189960 = CARTESIAN_POINT('',(100.06941,-86.314851,1.585)); +#189961 = LINE('',#189962,#189963); +#189962 = CARTESIAN_POINT('',(100.039003,-86.284444,1.585)); +#189963 = VECTOR('',#189964,1.); +#189964 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#189965 = ORIENTED_EDGE('',*,*,#189966,.T.); +#189966 = EDGE_CURVE('',#189959,#189967,#189969,.T.); +#189967 = VERTEX_POINT('',#189968); +#189968 = CARTESIAN_POINT('',(100.146397,-86.353344,1.585)); +#189969 = LINE('',#189970,#189971); +#189970 = CARTESIAN_POINT('',(100.06941,-86.314851,1.585)); +#189971 = VECTOR('',#189972,1.); +#189972 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#189973 = ORIENTED_EDGE('',*,*,#189974,.T.); +#189974 = EDGE_CURVE('',#189967,#189975,#189977,.T.); +#189975 = VERTEX_POINT('',#189976); +#189976 = CARTESIAN_POINT('',(100.344238,-86.404646,1.585)); +#189977 = LINE('',#189978,#189979); +#189978 = CARTESIAN_POINT('',(100.146397,-86.353344,1.585)); +#189979 = VECTOR('',#189980,1.); +#189980 = DIRECTION('',(0.967985143201,-0.251007494991,0.)); +#189981 = ORIENTED_EDGE('',*,*,#189982,.T.); +#189982 = EDGE_CURVE('',#189975,#189983,#189985,.T.); +#189983 = VERTEX_POINT('',#189984); +#189984 = CARTESIAN_POINT('',(100.453218,-86.461595,1.585)); +#189985 = LINE('',#189986,#189987); +#189986 = CARTESIAN_POINT('',(100.344238,-86.404646,1.585)); +#189987 = VECTOR('',#189988,1.); +#189988 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#189989 = ORIENTED_EDGE('',*,*,#189990,.T.); +#189990 = EDGE_CURVE('',#189983,#189991,#189993,.T.); +#189991 = VERTEX_POINT('',#189992); +#189992 = CARTESIAN_POINT('',(100.516671,-86.527125,1.585)); +#189993 = LINE('',#189994,#189995); +#189994 = CARTESIAN_POINT('',(100.453218,-86.461595,1.585)); +#189995 = VECTOR('',#189996,1.); +#189996 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#189997 = ORIENTED_EDGE('',*,*,#189998,.T.); +#189998 = EDGE_CURVE('',#189991,#189999,#190001,.T.); +#189999 = VERTEX_POINT('',#190000); +#190000 = CARTESIAN_POINT('',(100.511305,-86.899963,1.585)); +#190001 = CIRCLE('',#190002,0.290999251663); +#190002 = AXIS2_PLACEMENT_3D('',#190003,#190004,#190005); +#190003 = CARTESIAN_POINT('',(100.2905803369,-86.7103286477,1.585)); +#190004 = DIRECTION('',(0.,0.,-1.)); +#190005 = DIRECTION('',(0.776945857418,0.629567418662,0.)); +#190006 = ORIENTED_EDGE('',*,*,#190007,.T.); +#190007 = EDGE_CURVE('',#189999,#190008,#190010,.T.); +#190008 = VERTEX_POINT('',#190009); +#190009 = CARTESIAN_POINT('',(100.445775,-86.963417,1.585)); +#190010 = LINE('',#190011,#190012); +#190011 = CARTESIAN_POINT('',(100.511305,-86.899963,1.585)); +#190012 = VECTOR('',#190013,1.); +#190013 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#190014 = ORIENTED_EDGE('',*,*,#190015,.T.); +#190015 = EDGE_CURVE('',#190008,#190016,#190018,.T.); +#190016 = VERTEX_POINT('',#190017); +#190017 = CARTESIAN_POINT('',(100.325329,-87.021478,1.585)); +#190018 = LINE('',#190019,#190020); +#190019 = CARTESIAN_POINT('',(100.445775,-86.963417,1.585)); +#190020 = VECTOR('',#190021,1.); +#190021 = DIRECTION('',(-0.900801384651,-0.434231350101,0.)); +#190022 = ORIENTED_EDGE('',*,*,#190023,.T.); +#190023 = EDGE_CURVE('',#190016,#190024,#190026,.T.); +#190024 = VERTEX_POINT('',#190025); +#190025 = CARTESIAN_POINT('',(100.056139,-87.020719,1.585)); +#190026 = LINE('',#190027,#190028); +#190027 = CARTESIAN_POINT('',(100.325329,-87.021478,1.585)); +#190028 = VECTOR('',#190029,1.); +#190029 = DIRECTION('',(-0.999996025037,2.819558612894E-03,0.)); +#190030 = ORIENTED_EDGE('',*,*,#190031,.T.); +#190031 = EDGE_CURVE('',#190024,#190032,#190034,.T.); +#190032 = VERTEX_POINT('',#190033); +#190033 = CARTESIAN_POINT('',(99.892602,-86.965457,1.585)); +#190034 = LINE('',#190035,#190036); +#190035 = CARTESIAN_POINT('',(100.056139,-87.020719,1.585)); +#190036 = VECTOR('',#190037,1.); +#190037 = DIRECTION('',(-0.94737239725,0.320133629801,0.)); +#190038 = ORIENTED_EDGE('',*,*,#190039,.T.); +#190039 = EDGE_CURVE('',#190032,#190040,#190042,.T.); +#190040 = VERTEX_POINT('',#190041); +#190041 = CARTESIAN_POINT('',(99.953462,-86.829149,1.585)); +#190042 = CIRCLE('',#190043,7.50000151955E-02); +#190043 = AXIS2_PLACEMENT_3D('',#190044,#190045,#190046); +#190044 = CARTESIAN_POINT('',(99.929745099963,-86.90030032417,1.585)); +#190045 = DIRECTION('',(0.,0.,-1.)); +#190046 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#190047 = ORIENTED_EDGE('',*,*,#190048,.T.); +#190048 = EDGE_CURVE('',#190040,#190049,#190051,.T.); +#190049 = VERTEX_POINT('',#190050); +#190050 = CARTESIAN_POINT('',(100.084772,-86.872919,1.585)); +#190051 = LINE('',#190052,#190053); +#190052 = CARTESIAN_POINT('',(99.953462,-86.829149,1.585)); +#190053 = VECTOR('',#190054,1.); +#190054 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#190055 = ORIENTED_EDGE('',*,*,#190056,.T.); +#190056 = EDGE_CURVE('',#190049,#190057,#190059,.T.); +#190057 = VERTEX_POINT('',#190058); +#190058 = CARTESIAN_POINT('',(100.292992,-86.872919,1.585)); +#190059 = LINE('',#190060,#190061); +#190060 = CARTESIAN_POINT('',(100.084772,-86.872919,1.585)); +#190061 = VECTOR('',#190062,1.); +#190062 = DIRECTION('',(1.,0.,0.)); +#190063 = ORIENTED_EDGE('',*,*,#190064,.T.); +#190064 = EDGE_CURVE('',#190057,#190065,#190067,.T.); +#190065 = VERTEX_POINT('',#190066); +#190066 = CARTESIAN_POINT('',(100.426173,-86.739737,1.585)); +#190067 = CIRCLE('',#190068,0.186867760544); +#190068 = AXIS2_PLACEMENT_3D('',#190069,#190070,#190071); +#190069 = CARTESIAN_POINT('',(100.24545296928,-86.69219932622,1.585)); +#190070 = DIRECTION('',(0.,0.,1.)); +#190071 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#190072 = ORIENTED_EDGE('',*,*,#190073,.T.); +#190073 = EDGE_CURVE('',#190065,#190074,#190076,.T.); +#190074 = VERTEX_POINT('',#190075); +#190075 = CARTESIAN_POINT('',(100.426173,-86.679909,1.585)); +#190076 = LINE('',#190077,#190078); +#190077 = CARTESIAN_POINT('',(100.426173,-86.739737,1.585)); +#190078 = VECTOR('',#190079,1.); +#190079 = DIRECTION('',(0.,1.,0.)); +#190080 = ORIENTED_EDGE('',*,*,#190081,.T.); +#190081 = EDGE_CURVE('',#190074,#190082,#190084,.T.); +#190082 = VERTEX_POINT('',#190083); +#190083 = CARTESIAN_POINT('',(100.391915,-86.611393,1.585)); +#190084 = LINE('',#190085,#190086); +#190085 = CARTESIAN_POINT('',(100.426173,-86.679909,1.585)); +#190086 = VECTOR('',#190087,1.); +#190087 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#190088 = ORIENTED_EDGE('',*,*,#190089,.T.); +#190089 = EDGE_CURVE('',#190082,#190090,#190092,.T.); +#190090 = VERTEX_POINT('',#190091); +#190091 = CARTESIAN_POINT('',(100.361508,-86.580986,1.585)); +#190092 = LINE('',#190093,#190094); +#190093 = CARTESIAN_POINT('',(100.391915,-86.611393,1.585)); +#190094 = VECTOR('',#190095,1.); +#190095 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#190096 = ORIENTED_EDGE('',*,*,#190097,.T.); +#190097 = EDGE_CURVE('',#190090,#190098,#190100,.T.); +#190098 = VERTEX_POINT('',#190099); +#190099 = CARTESIAN_POINT('',(100.284521,-86.542492,1.585)); +#190100 = LINE('',#190101,#190102); +#190101 = CARTESIAN_POINT('',(100.361508,-86.580986,1.585)); +#190102 = VECTOR('',#190103,1.); +#190103 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#190104 = ORIENTED_EDGE('',*,*,#190105,.T.); +#190105 = EDGE_CURVE('',#190098,#190106,#190108,.T.); +#190106 = VERTEX_POINT('',#190107); +#190107 = CARTESIAN_POINT('',(100.08668,-86.491191,1.585)); +#190108 = LINE('',#190109,#190110); +#190109 = CARTESIAN_POINT('',(100.284521,-86.542492,1.585)); +#190110 = VECTOR('',#190111,1.); +#190111 = DIRECTION('',(-0.967986331989,0.251002910506,0.)); +#190112 = ORIENTED_EDGE('',*,*,#190113,.T.); +#190113 = EDGE_CURVE('',#190106,#190114,#190116,.T.); +#190114 = VERTEX_POINT('',#190115); +#190115 = CARTESIAN_POINT('',(99.977699,-86.434241,1.585)); +#190116 = LINE('',#190117,#190118); +#190117 = CARTESIAN_POINT('',(100.08668,-86.491191,1.585)); +#190118 = VECTOR('',#190119,1.); +#190119 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#190120 = ORIENTED_EDGE('',*,*,#190121,.T.); +#190121 = EDGE_CURVE('',#190114,#190122,#190124,.T.); +#190122 = VERTEX_POINT('',#190123); +#190123 = CARTESIAN_POINT('',(99.914246,-86.368711,1.585)); +#190124 = LINE('',#190125,#190126); +#190125 = CARTESIAN_POINT('',(99.977699,-86.434241,1.585)); +#190126 = VECTOR('',#190127,1.); +#190127 = DIRECTION('',(-0.695630129574,0.718400113328,0.)); +#190128 = ORIENTED_EDGE('',*,*,#190129,.T.); +#190129 = EDGE_CURVE('',#190122,#190130,#190132,.T.); +#190130 = VERTEX_POINT('',#190131); +#190131 = CARTESIAN_POINT('',(99.919612,-85.995873,1.585)); +#190132 = CIRCLE('',#190133,0.291002094877); +#190133 = AXIS2_PLACEMENT_3D('',#190134,#190135,#190136); +#190134 = CARTESIAN_POINT('',(100.14034036573,-86.18550740558,1.585)); +#190135 = DIRECTION('',(0.,0.,-1.)); +#190136 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#190137 = ORIENTED_EDGE('',*,*,#190138,.T.); +#190138 = EDGE_CURVE('',#190130,#189883,#190139,.T.); +#190139 = LINE('',#190140,#190141); +#190140 = CARTESIAN_POINT('',(99.919612,-85.995873,1.585)); +#190141 = VECTOR('',#190142,1.); +#190142 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#190143 = PLANE('',#190144); +#190144 = AXIS2_PLACEMENT_3D('',#190145,#190146,#190147); +#190145 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190146 = DIRECTION('',(0.,0.,1.)); +#190147 = DIRECTION('',(1.,0.,-0.)); +#190148 = SHELL_BASED_SURFACE_MODEL('',(#190149)); +#190149 = OPEN_SHELL('',(#190150)); +#190150 = ADVANCED_FACE('',(#190151),#190392,.T.); +#190151 = FACE_BOUND('',#190152,.F.); +#190152 = EDGE_LOOP('',(#190153,#190164,#190172,#190180,#190188,#190196, + #190205,#190213,#190222,#190230,#190238,#190246,#190254,#190262, + #190270,#190279,#190287,#190295,#190303,#190311,#190320,#190328, + #190336,#190344,#190353,#190361,#190369,#190377,#190386)); +#190153 = ORIENTED_EDGE('',*,*,#190154,.T.); +#190154 = EDGE_CURVE('',#190155,#190157,#190159,.T.); +#190155 = VERTEX_POINT('',#190156); +#190156 = CARTESIAN_POINT('',(151.008882,-85.757142,1.585)); +#190157 = VERTEX_POINT('',#190158); +#190158 = CARTESIAN_POINT('',(151.073882,-85.692142,1.585)); +#190159 = CIRCLE('',#190160,6.500103935393E-02); +#190160 = AXIS2_PLACEMENT_3D('',#190161,#190162,#190163); +#190161 = CARTESIAN_POINT('',(151.07388303934,-85.75714303934,1.585)); +#190162 = DIRECTION('',(0.,0.,-1.)); +#190163 = DIRECTION('',(-0.999999999872,1.598967714806E-05,0.)); +#190164 = ORIENTED_EDGE('',*,*,#190165,.T.); +#190165 = EDGE_CURVE('',#190157,#190166,#190168,.T.); +#190166 = VERTEX_POINT('',#190167); +#190167 = CARTESIAN_POINT('',(151.373882,-85.692142,1.585)); +#190168 = LINE('',#190169,#190170); +#190169 = CARTESIAN_POINT('',(151.073882,-85.692142,1.585)); +#190170 = VECTOR('',#190171,1.); +#190171 = DIRECTION('',(1.,0.,0.)); +#190172 = ORIENTED_EDGE('',*,*,#190173,.T.); +#190173 = EDGE_CURVE('',#190166,#190174,#190176,.T.); +#190174 = VERTEX_POINT('',#190175); +#190175 = CARTESIAN_POINT('',(151.398756,-85.69709,1.585)); +#190176 = LINE('',#190177,#190178); +#190177 = CARTESIAN_POINT('',(151.373882,-85.692142,1.585)); +#190178 = VECTOR('',#190179,1.); +#190179 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#190180 = ORIENTED_EDGE('',*,*,#190181,.T.); +#190181 = EDGE_CURVE('',#190174,#190182,#190184,.T.); +#190182 = VERTEX_POINT('',#190183); +#190183 = CARTESIAN_POINT('',(151.419843,-85.71118,1.585)); +#190184 = LINE('',#190185,#190186); +#190185 = CARTESIAN_POINT('',(151.398756,-85.69709,1.585)); +#190186 = VECTOR('',#190187,1.); +#190187 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#190188 = ORIENTED_EDGE('',*,*,#190189,.T.); +#190189 = EDGE_CURVE('',#190182,#190190,#190192,.T.); +#190190 = VERTEX_POINT('',#190191); +#190191 = CARTESIAN_POINT('',(151.471003,-85.766461,1.585)); +#190192 = LINE('',#190193,#190194); +#190193 = CARTESIAN_POINT('',(151.419843,-85.71118,1.585)); +#190194 = VECTOR('',#190195,1.); +#190195 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#190196 = ORIENTED_EDGE('',*,*,#190197,.T.); +#190197 = EDGE_CURVE('',#190190,#190198,#190200,.T.); +#190198 = VERTEX_POINT('',#190199); +#190199 = CARTESIAN_POINT('',(151.470999,-86.176399,1.585)); +#190200 = CIRCLE('',#190201,0.409312568567); +#190201 = AXIS2_PLACEMENT_3D('',#190202,#190203,#190204); +#190202 = CARTESIAN_POINT('',(151.11670664806,-85.97142654294,1.585)); +#190203 = DIRECTION('',(0.,0.,-1.)); +#190204 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#190205 = ORIENTED_EDGE('',*,*,#190206,.T.); +#190206 = EDGE_CURVE('',#190198,#190207,#190209,.T.); +#190207 = VERTEX_POINT('',#190208); +#190208 = CARTESIAN_POINT('',(151.368322,-86.280322,1.585)); +#190209 = LINE('',#190210,#190211); +#190210 = CARTESIAN_POINT('',(151.470999,-86.176399,1.585)); +#190211 = VECTOR('',#190212,1.); +#190212 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#190213 = ORIENTED_EDGE('',*,*,#190214,.T.); +#190214 = EDGE_CURVE('',#190207,#190215,#190217,.T.); +#190215 = VERTEX_POINT('',#190216); +#190216 = CARTESIAN_POINT('',(150.929546,-86.377344,1.585)); +#190217 = CIRCLE('',#190218,0.675422176574); +#190218 = AXIS2_PLACEMENT_3D('',#190219,#190220,#190221); +#190219 = CARTESIAN_POINT('',(151.01141275007,-85.70690164465,1.585)); +#190220 = DIRECTION('',(0.,0.,-1.)); +#190221 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#190222 = ORIENTED_EDGE('',*,*,#190223,.T.); +#190223 = EDGE_CURVE('',#190215,#190224,#190226,.T.); +#190224 = VERTEX_POINT('',#190225); +#190225 = CARTESIAN_POINT('',(150.744813,-86.329566,1.585)); +#190226 = LINE('',#190227,#190228); +#190227 = CARTESIAN_POINT('',(150.929546,-86.377344,1.585)); +#190228 = VECTOR('',#190229,1.); +#190229 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#190230 = ORIENTED_EDGE('',*,*,#190231,.T.); +#190231 = EDGE_CURVE('',#190224,#190232,#190234,.T.); +#190232 = VERTEX_POINT('',#190233); +#190233 = CARTESIAN_POINT('',(150.642206,-86.274533,1.585)); +#190234 = LINE('',#190235,#190236); +#190235 = CARTESIAN_POINT('',(150.744813,-86.329566,1.585)); +#190236 = VECTOR('',#190237,1.); +#190237 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#190238 = ORIENTED_EDGE('',*,*,#190239,.T.); +#190239 = EDGE_CURVE('',#190232,#190240,#190242,.T.); +#190240 = VERTEX_POINT('',#190241); +#190241 = CARTESIAN_POINT('',(150.548191,-86.176395,1.585)); +#190242 = LINE('',#190243,#190244); +#190243 = CARTESIAN_POINT('',(150.642206,-86.274533,1.585)); +#190244 = VECTOR('',#190245,1.); +#190245 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#190246 = ORIENTED_EDGE('',*,*,#190247,.T.); +#190247 = EDGE_CURVE('',#190240,#190248,#190250,.T.); +#190248 = VERTEX_POINT('',#190249); +#190249 = CARTESIAN_POINT('',(150.49663,-86.024507,1.585)); +#190250 = LINE('',#190251,#190252); +#190251 = CARTESIAN_POINT('',(150.548191,-86.176395,1.585)); +#190252 = VECTOR('',#190253,1.); +#190253 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#190254 = ORIENTED_EDGE('',*,*,#190255,.T.); +#190255 = EDGE_CURVE('',#190248,#190256,#190258,.T.); +#190256 = VERTEX_POINT('',#190257); +#190257 = CARTESIAN_POINT('',(150.497512,-85.871057,1.585)); +#190258 = LINE('',#190259,#190260); +#190259 = CARTESIAN_POINT('',(150.49663,-86.024507,1.585)); +#190260 = VECTOR('',#190261,1.); +#190261 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#190262 = ORIENTED_EDGE('',*,*,#190263,.T.); +#190263 = EDGE_CURVE('',#190256,#190264,#190266,.T.); +#190264 = VERTEX_POINT('',#190265); +#190265 = CARTESIAN_POINT('',(150.544316,-85.77093,1.585)); +#190266 = LINE('',#190267,#190268); +#190267 = CARTESIAN_POINT('',(150.497512,-85.871057,1.585)); +#190268 = VECTOR('',#190269,1.); +#190269 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#190270 = ORIENTED_EDGE('',*,*,#190271,.T.); +#190271 = EDGE_CURVE('',#190264,#190272,#190274,.T.); +#190272 = VERTEX_POINT('',#190273); +#190273 = CARTESIAN_POINT('',(150.660592,-85.829068,1.585)); +#190274 = CIRCLE('',#190275,6.500026004258E-02); +#190275 = AXIS2_PLACEMENT_3D('',#190276,#190277,#190278); +#190276 = CARTESIAN_POINT('',(150.60245365279,-85.7999996944,1.585)); +#190277 = DIRECTION('',(0.,0.,-1.)); +#190278 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#190279 = ORIENTED_EDGE('',*,*,#190280,.T.); +#190280 = EDGE_CURVE('',#190272,#190281,#190283,.T.); +#190281 = VERTEX_POINT('',#190282); +#190282 = CARTESIAN_POINT('',(150.624597,-85.901058,1.585)); +#190283 = LINE('',#190284,#190285); +#190284 = CARTESIAN_POINT('',(150.660592,-85.829068,1.585)); +#190285 = VECTOR('',#190286,1.); +#190286 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#190287 = ORIENTED_EDGE('',*,*,#190288,.T.); +#190288 = EDGE_CURVE('',#190281,#190289,#190291,.T.); +#190289 = VERTEX_POINT('',#190290); +#190290 = CARTESIAN_POINT('',(150.624597,-86.003738,1.585)); +#190291 = LINE('',#190292,#190293); +#190292 = CARTESIAN_POINT('',(150.624597,-85.901058,1.585)); +#190293 = VECTOR('',#190294,1.); +#190294 = DIRECTION('',(0.,-1.,0.)); +#190295 = ORIENTED_EDGE('',*,*,#190296,.T.); +#190296 = EDGE_CURVE('',#190289,#190297,#190299,.T.); +#190297 = VERTEX_POINT('',#190298); +#190298 = CARTESIAN_POINT('',(150.659265,-86.107743,1.585)); +#190299 = LINE('',#190300,#190301); +#190300 = CARTESIAN_POINT('',(150.624597,-86.003738,1.585)); +#190301 = VECTOR('',#190302,1.); +#190302 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#190303 = ORIENTED_EDGE('',*,*,#190304,.T.); +#190304 = EDGE_CURVE('',#190297,#190305,#190307,.T.); +#190305 = VERTEX_POINT('',#190306); +#190306 = CARTESIAN_POINT('',(150.726669,-86.175149,1.585)); +#190307 = LINE('',#190308,#190309); +#190308 = CARTESIAN_POINT('',(150.659265,-86.107743,1.585)); +#190309 = VECTOR('',#190310,1.); +#190310 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#190311 = ORIENTED_EDGE('',*,*,#190312,.T.); +#190312 = EDGE_CURVE('',#190305,#190313,#190315,.T.); +#190313 = VERTEX_POINT('',#190314); +#190314 = CARTESIAN_POINT('',(151.065881,-86.249285,1.585)); +#190315 = CIRCLE('',#190316,0.553317785495); +#190316 = AXIS2_PLACEMENT_3D('',#190317,#190318,#190319); +#190317 = CARTESIAN_POINT('',(151.0084500839,-85.69895576979,1.585)); +#190318 = DIRECTION('',(0.,0.,1.)); +#190319 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#190320 = ORIENTED_EDGE('',*,*,#190321,.T.); +#190321 = EDGE_CURVE('',#190313,#190322,#190324,.T.); +#190322 = VERTEX_POINT('',#190323); +#190323 = CARTESIAN_POINT('',(151.222622,-86.210099,1.585)); +#190324 = LINE('',#190325,#190326); +#190325 = CARTESIAN_POINT('',(151.065881,-86.249285,1.585)); +#190326 = VECTOR('',#190327,1.); +#190327 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#190328 = ORIENTED_EDGE('',*,*,#190329,.T.); +#190329 = EDGE_CURVE('',#190322,#190330,#190332,.T.); +#190330 = VERTEX_POINT('',#190331); +#190331 = CARTESIAN_POINT('',(151.292522,-86.17515,1.585)); +#190332 = LINE('',#190333,#190334); +#190333 = CARTESIAN_POINT('',(151.222622,-86.210099,1.585)); +#190334 = VECTOR('',#190335,1.); +#190335 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#190336 = ORIENTED_EDGE('',*,*,#190337,.T.); +#190337 = EDGE_CURVE('',#190330,#190338,#190340,.T.); +#190338 = VERTEX_POINT('',#190339); +#190339 = CARTESIAN_POINT('',(151.359928,-86.107743,1.585)); +#190340 = LINE('',#190341,#190342); +#190341 = CARTESIAN_POINT('',(151.292522,-86.17515,1.585)); +#190342 = VECTOR('',#190343,1.); +#190343 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#190344 = ORIENTED_EDGE('',*,*,#190345,.T.); +#190345 = EDGE_CURVE('',#190338,#190346,#190348,.T.); +#190346 = VERTEX_POINT('',#190347); +#190347 = CARTESIAN_POINT('',(151.359928,-85.835111,1.585)); +#190348 = CIRCLE('',#190349,0.272194686174); +#190349 = AXIS2_PLACEMENT_3D('',#190350,#190351,#190352); +#190350 = CARTESIAN_POINT('',(151.12432686391,-85.971427,1.585)); +#190351 = DIRECTION('',(0.,-0.,1.)); +#190352 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#190353 = ORIENTED_EDGE('',*,*,#190354,.T.); +#190354 = EDGE_CURVE('',#190346,#190355,#190357,.T.); +#190355 = VERTEX_POINT('',#190356); +#190356 = CARTESIAN_POINT('',(151.346959,-85.822142,1.585)); +#190357 = LINE('',#190358,#190359); +#190358 = CARTESIAN_POINT('',(151.359928,-85.835111,1.585)); +#190359 = VECTOR('',#190360,1.); +#190360 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#190361 = ORIENTED_EDGE('',*,*,#190362,.T.); +#190362 = EDGE_CURVE('',#190355,#190363,#190365,.T.); +#190363 = VERTEX_POINT('',#190364); +#190364 = CARTESIAN_POINT('',(151.138882,-85.822142,1.585)); +#190365 = LINE('',#190366,#190367); +#190366 = CARTESIAN_POINT('',(151.346959,-85.822142,1.585)); +#190367 = VECTOR('',#190368,1.); +#190368 = DIRECTION('',(-1.,0.,0.)); +#190369 = ORIENTED_EDGE('',*,*,#190370,.T.); +#190370 = EDGE_CURVE('',#190363,#190371,#190373,.T.); +#190371 = VERTEX_POINT('',#190372); +#190372 = CARTESIAN_POINT('',(151.138882,-85.928571,1.585)); +#190373 = LINE('',#190374,#190375); +#190374 = CARTESIAN_POINT('',(151.138882,-85.822142,1.585)); +#190375 = VECTOR('',#190376,1.); +#190376 = DIRECTION('',(0.,-1.,0.)); +#190377 = ORIENTED_EDGE('',*,*,#190378,.T.); +#190378 = EDGE_CURVE('',#190371,#190379,#190381,.T.); +#190379 = VERTEX_POINT('',#190380); +#190380 = CARTESIAN_POINT('',(151.008882,-85.928571,1.585)); +#190381 = CIRCLE('',#190382,6.500000000092E-02); +#190382 = AXIS2_PLACEMENT_3D('',#190383,#190384,#190385); +#190383 = CARTESIAN_POINT('',(151.073882,-85.92857065513,1.585)); +#190384 = DIRECTION('',(-0.,0.,-1.)); +#190385 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#190386 = ORIENTED_EDGE('',*,*,#190387,.T.); +#190387 = EDGE_CURVE('',#190379,#190155,#190388,.T.); +#190388 = LINE('',#190389,#190390); +#190389 = CARTESIAN_POINT('',(151.008882,-85.928571,1.585)); +#190390 = VECTOR('',#190391,1.); +#190391 = DIRECTION('',(0.,1.,0.)); +#190392 = PLANE('',#190393); +#190393 = AXIS2_PLACEMENT_3D('',#190394,#190395,#190396); +#190394 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190395 = DIRECTION('',(0.,0.,1.)); +#190396 = DIRECTION('',(1.,0.,-0.)); +#190397 = SHELL_BASED_SURFACE_MODEL('',(#190398)); +#190398 = OPEN_SHELL('',(#190399)); +#190399 = ADVANCED_FACE('',(#190400),#190559,.T.); +#190400 = FACE_BOUND('',#190401,.F.); +#190401 = EDGE_LOOP('',(#190402,#190413,#190421,#190429,#190437,#190445, + #190453,#190461,#190470,#190478,#190487,#190495,#190503,#190511, + #190520,#190528,#190536,#190544,#190553)); +#190402 = ORIENTED_EDGE('',*,*,#190403,.T.); +#190403 = EDGE_CURVE('',#190404,#190406,#190408,.T.); +#190404 = VERTEX_POINT('',#190405); +#190405 = CARTESIAN_POINT('',(128.300966,-85.110456,1.585)); +#190406 = VERTEX_POINT('',#190407); +#190407 = CARTESIAN_POINT('',(128.810361,-85.119786,1.585)); +#190408 = CIRCLE('',#190409,0.450326844012); +#190409 = AXIS2_PLACEMENT_3D('',#190410,#190411,#190412); +#190410 = CARTESIAN_POINT('',(128.5488630301,-85.48640989199,1.585)); +#190411 = DIRECTION('',(0.,0.,-1.)); +#190412 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#190413 = ORIENTED_EDGE('',*,*,#190414,.T.); +#190414 = EDGE_CURVE('',#190406,#190415,#190417,.T.); +#190415 = VERTEX_POINT('',#190416); +#190416 = CARTESIAN_POINT('',(128.873814,-85.185316,1.585)); +#190417 = LINE('',#190418,#190419); +#190418 = CARTESIAN_POINT('',(128.810361,-85.119786,1.585)); +#190419 = VECTOR('',#190420,1.); +#190420 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#190421 = ORIENTED_EDGE('',*,*,#190422,.T.); +#190422 = EDGE_CURVE('',#190415,#190423,#190425,.T.); +#190423 = VERTEX_POINT('',#190424); +#190424 = CARTESIAN_POINT('',(128.931875,-85.305763,1.585)); +#190425 = LINE('',#190426,#190427); +#190426 = CARTESIAN_POINT('',(128.873814,-85.185316,1.585)); +#190427 = VECTOR('',#190428,1.); +#190428 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#190429 = ORIENTED_EDGE('',*,*,#190430,.T.); +#190430 = EDGE_CURVE('',#190423,#190431,#190433,.T.); +#190431 = VERTEX_POINT('',#190432); +#190432 = CARTESIAN_POINT('',(128.931116,-85.432095,1.585)); +#190433 = LINE('',#190434,#190435); +#190434 = CARTESIAN_POINT('',(128.931875,-85.305763,1.585)); +#190435 = VECTOR('',#190436,1.); +#190436 = DIRECTION('',(-6.007870547433E-03,-0.999981952583,0.)); +#190437 = ORIENTED_EDGE('',*,*,#190438,.T.); +#190438 = EDGE_CURVE('',#190431,#190439,#190441,.T.); +#190439 = VERTEX_POINT('',#190440); +#190440 = CARTESIAN_POINT('',(128.873058,-85.600158,1.585)); +#190441 = LINE('',#190442,#190443); +#190442 = CARTESIAN_POINT('',(128.931116,-85.432095,1.585)); +#190443 = VECTOR('',#190444,1.); +#190444 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#190445 = ORIENTED_EDGE('',*,*,#190446,.T.); +#190446 = EDGE_CURVE('',#190439,#190447,#190449,.T.); +#190447 = VERTEX_POINT('',#190448); +#190448 = CARTESIAN_POINT('',(128.420335,-86.054919,1.585)); +#190449 = LINE('',#190450,#190451); +#190450 = CARTESIAN_POINT('',(128.873058,-85.600158,1.585)); +#190451 = VECTOR('',#190452,1.); +#190452 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#190453 = ORIENTED_EDGE('',*,*,#190454,.T.); +#190454 = EDGE_CURVE('',#190447,#190455,#190457,.T.); +#190455 = VERTEX_POINT('',#190456); +#190456 = CARTESIAN_POINT('',(128.872948,-86.05636,1.585)); +#190457 = LINE('',#190458,#190459); +#190458 = CARTESIAN_POINT('',(128.420335,-86.054919,1.585)); +#190459 = VECTOR('',#190460,1.); +#190460 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#190461 = ORIENTED_EDGE('',*,*,#190462,.T.); +#190462 = EDGE_CURVE('',#190455,#190463,#190465,.T.); +#190463 = VERTEX_POINT('',#190464); +#190464 = CARTESIAN_POINT('',(128.858316,-86.204919,1.585)); +#190465 = CIRCLE('',#190466,7.500006711464E-02); +#190466 = AXIS2_PLACEMENT_3D('',#190467,#190468,#190469); +#190467 = CARTESIAN_POINT('',(128.85831606711,-86.12991893288,1.585)); +#190468 = DIRECTION('',(0.,0.,-1.)); +#190469 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#190470 = ORIENTED_EDGE('',*,*,#190471,.T.); +#190471 = EDGE_CURVE('',#190463,#190472,#190474,.T.); +#190472 = VERTEX_POINT('',#190473); +#190473 = CARTESIAN_POINT('',(128.224637,-86.203478,1.585)); +#190474 = LINE('',#190475,#190476); +#190475 = CARTESIAN_POINT('',(128.858316,-86.204919,1.585)); +#190476 = VECTOR('',#190477,1.); +#190477 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#190478 = ORIENTED_EDGE('',*,*,#190479,.T.); +#190479 = EDGE_CURVE('',#190472,#190480,#190482,.T.); +#190480 = VERTEX_POINT('',#190481); +#190481 = CARTESIAN_POINT('',(128.186236,-86.076886,1.585)); +#190482 = CIRCLE('',#190483,7.500021013111E-02); +#190483 = AXIS2_PLACEMENT_3D('',#190484,#190485,#190486); +#190484 = CARTESIAN_POINT('',(128.2392693167,-86.12991899764,1.585)); +#190485 = DIRECTION('',(0.,0.,-1.)); +#190486 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#190487 = ORIENTED_EDGE('',*,*,#190488,.T.); +#190488 = EDGE_CURVE('',#190480,#190489,#190491,.T.); +#190489 = VERTEX_POINT('',#190490); +#190490 = CARTESIAN_POINT('',(128.745144,-85.517976,1.585)); +#190491 = LINE('',#190492,#190493); +#190492 = CARTESIAN_POINT('',(128.186236,-86.076886,1.585)); +#190493 = VECTOR('',#190494,1.); +#190494 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#190495 = ORIENTED_EDGE('',*,*,#190496,.T.); +#190496 = EDGE_CURVE('',#190489,#190497,#190499,.T.); +#190497 = VERTEX_POINT('',#190498); +#190498 = CARTESIAN_POINT('',(128.783316,-85.403463,1.585)); +#190499 = LINE('',#190500,#190501); +#190500 = CARTESIAN_POINT('',(128.745144,-85.517976,1.585)); +#190501 = VECTOR('',#190502,1.); +#190502 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#190503 = ORIENTED_EDGE('',*,*,#190504,.T.); +#190504 = EDGE_CURVE('',#190497,#190505,#190507,.T.); +#190505 = VERTEX_POINT('',#190506); +#190506 = CARTESIAN_POINT('',(128.783316,-85.3381,1.585)); +#190507 = LINE('',#190508,#190509); +#190508 = CARTESIAN_POINT('',(128.783316,-85.403463,1.585)); +#190509 = VECTOR('',#190510,1.); +#190510 = DIRECTION('',(0.,1.,0.)); +#190511 = ORIENTED_EDGE('',*,*,#190512,.T.); +#190512 = EDGE_CURVE('',#190505,#190513,#190515,.T.); +#190513 = VERTEX_POINT('',#190514); +#190514 = CARTESIAN_POINT('',(128.650135,-85.204919,1.585)); +#190515 = CIRCLE('',#190516,0.18686440374); +#190516 = AXIS2_PLACEMENT_3D('',#190517,#190518,#190519); +#190517 = CARTESIAN_POINT('',(128.602599,-85.385636,1.585)); +#190518 = DIRECTION('',(0.,0.,1.)); +#190519 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#190520 = ORIENTED_EDGE('',*,*,#190521,.T.); +#190521 = EDGE_CURVE('',#190513,#190522,#190524,.T.); +#190522 = VERTEX_POINT('',#190523); +#190523 = CARTESIAN_POINT('',(128.44745,-85.204919,1.585)); +#190524 = LINE('',#190525,#190526); +#190525 = CARTESIAN_POINT('',(128.650135,-85.204919,1.585)); +#190526 = VECTOR('',#190527,1.); +#190527 = DIRECTION('',(-1.,0.,0.)); +#190528 = ORIENTED_EDGE('',*,*,#190529,.T.); +#190529 = EDGE_CURVE('',#190522,#190530,#190532,.T.); +#190530 = VERTEX_POINT('',#190531); +#190531 = CARTESIAN_POINT('',(128.378934,-85.239177,1.585)); +#190532 = LINE('',#190533,#190534); +#190533 = CARTESIAN_POINT('',(128.44745,-85.204919,1.585)); +#190534 = VECTOR('',#190535,1.); +#190535 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#190536 = ORIENTED_EDGE('',*,*,#190537,.T.); +#190537 = EDGE_CURVE('',#190530,#190538,#190540,.T.); +#190538 = VERTEX_POINT('',#190539); +#190539 = CARTESIAN_POINT('',(128.328556,-85.287517,1.585)); +#190540 = LINE('',#190541,#190542); +#190541 = CARTESIAN_POINT('',(128.378934,-85.239177,1.585)); +#190542 = VECTOR('',#190543,1.); +#190543 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#190544 = ORIENTED_EDGE('',*,*,#190545,.T.); +#190545 = EDGE_CURVE('',#190538,#190546,#190548,.T.); +#190546 = VERTEX_POINT('',#190547); +#190547 = CARTESIAN_POINT('',(128.233855,-85.172124,1.585)); +#190548 = CIRCLE('',#190549,7.499996838526E-02); +#190549 = AXIS2_PLACEMENT_3D('',#190550,#190551,#190552); +#190550 = CARTESIAN_POINT('',(128.286888,-85.22515697246,1.585)); +#190551 = DIRECTION('',(0.,0.,-1.)); +#190552 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#190553 = ORIENTED_EDGE('',*,*,#190554,.T.); +#190554 = EDGE_CURVE('',#190546,#190404,#190555,.T.); +#190555 = LINE('',#190556,#190557); +#190556 = CARTESIAN_POINT('',(128.233855,-85.172124,1.585)); +#190557 = VECTOR('',#190558,1.); +#190558 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#190559 = PLANE('',#190560); +#190560 = AXIS2_PLACEMENT_3D('',#190561,#190562,#190563); +#190561 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190562 = DIRECTION('',(0.,0.,1.)); +#190563 = DIRECTION('',(1.,0.,-0.)); +#190564 = SHELL_BASED_SURFACE_MODEL('',(#190565)); +#190565 = OPEN_SHELL('',(#190566)); +#190566 = ADVANCED_FACE('',(#190567),#190636,.T.); +#190567 = FACE_BOUND('',#190568,.F.); +#190568 = EDGE_LOOP('',(#190569,#190580,#190588,#190597,#190605,#190613, + #190622,#190630)); +#190569 = ORIENTED_EDGE('',*,*,#190570,.T.); +#190570 = EDGE_CURVE('',#190571,#190573,#190575,.T.); +#190571 = VERTEX_POINT('',#190572); +#190572 = CARTESIAN_POINT('',(126.415113,-85.203478,1.585)); +#190573 = VERTEX_POINT('',#190574); +#190574 = CARTESIAN_POINT('',(126.429745,-85.054919,1.585)); +#190575 = CIRCLE('',#190576,7.500006711464E-02); +#190576 = AXIS2_PLACEMENT_3D('',#190577,#190578,#190579); +#190577 = CARTESIAN_POINT('',(126.42974493288,-85.12991906711,1.585)); +#190578 = DIRECTION('',(0.,0.,-1.)); +#190579 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#190580 = ORIENTED_EDGE('',*,*,#190581,.T.); +#190581 = EDGE_CURVE('',#190573,#190582,#190584,.T.); +#190582 = VERTEX_POINT('',#190583); +#190583 = CARTESIAN_POINT('',(127.015805,-85.05636,1.585)); +#190584 = LINE('',#190585,#190586); +#190585 = CARTESIAN_POINT('',(126.429745,-85.054919,1.585)); +#190586 = VECTOR('',#190587,1.); +#190587 = DIRECTION('',(0.999996977183,-2.45878518261E-03,0.)); +#190588 = ORIENTED_EDGE('',*,*,#190589,.T.); +#190589 = EDGE_CURVE('',#190582,#190590,#190592,.T.); +#190590 = VERTEX_POINT('',#190591); +#190591 = CARTESIAN_POINT('',(127.001173,-85.204919,1.585)); +#190592 = CIRCLE('',#190593,7.500006711464E-02); +#190593 = AXIS2_PLACEMENT_3D('',#190594,#190595,#190596); +#190594 = CARTESIAN_POINT('',(127.00117306711,-85.12991893288,1.585)); +#190595 = DIRECTION('',(0.,0.,-1.)); +#190596 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#190597 = ORIENTED_EDGE('',*,*,#190598,.T.); +#190598 = EDGE_CURVE('',#190590,#190599,#190601,.T.); +#190599 = VERTEX_POINT('',#190600); +#190600 = CARTESIAN_POINT('',(126.790459,-85.204919,1.585)); +#190601 = LINE('',#190602,#190603); +#190602 = CARTESIAN_POINT('',(127.001173,-85.204919,1.585)); +#190603 = VECTOR('',#190604,1.); +#190604 = DIRECTION('',(-1.,0.,0.)); +#190605 = ORIENTED_EDGE('',*,*,#190606,.T.); +#190606 = EDGE_CURVE('',#190599,#190607,#190609,.T.); +#190607 = VERTEX_POINT('',#190608); +#190608 = CARTESIAN_POINT('',(126.789018,-86.144551,1.585)); +#190609 = LINE('',#190610,#190611); +#190610 = CARTESIAN_POINT('',(126.790459,-85.204919,1.585)); +#190611 = VECTOR('',#190612,1.); +#190612 = DIRECTION('',(-1.533577299926E-03,-0.99999882407,0.)); +#190613 = ORIENTED_EDGE('',*,*,#190614,.T.); +#190614 = EDGE_CURVE('',#190607,#190615,#190617,.T.); +#190615 = VERTEX_POINT('',#190616); +#190616 = CARTESIAN_POINT('',(126.640459,-86.129919,1.585)); +#190617 = CIRCLE('',#190618,7.500006711464E-02); +#190618 = AXIS2_PLACEMENT_3D('',#190619,#190620,#190621); +#190619 = CARTESIAN_POINT('',(126.71545906711,-86.12991906711,1.585)); +#190620 = DIRECTION('',(-0.,0.,-1.)); +#190621 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#190622 = ORIENTED_EDGE('',*,*,#190623,.T.); +#190623 = EDGE_CURVE('',#190615,#190624,#190626,.T.); +#190624 = VERTEX_POINT('',#190625); +#190625 = CARTESIAN_POINT('',(126.640459,-85.204919,1.585)); +#190626 = LINE('',#190627,#190628); +#190627 = CARTESIAN_POINT('',(126.640459,-86.129919,1.585)); +#190628 = VECTOR('',#190629,1.); +#190629 = DIRECTION('',(0.,1.,0.)); +#190630 = ORIENTED_EDGE('',*,*,#190631,.T.); +#190631 = EDGE_CURVE('',#190624,#190571,#190632,.T.); +#190632 = LINE('',#190633,#190634); +#190633 = CARTESIAN_POINT('',(126.640459,-85.204919,1.585)); +#190634 = VECTOR('',#190635,1.); +#190635 = DIRECTION('',(-0.999979555102,6.394480216655E-03,0.)); +#190636 = PLANE('',#190637); +#190637 = AXIS2_PLACEMENT_3D('',#190638,#190639,#190640); +#190638 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190639 = DIRECTION('',(0.,0.,1.)); +#190640 = DIRECTION('',(1.,0.,-0.)); +#190641 = SHELL_BASED_SURFACE_MODEL('',(#190642)); +#190642 = OPEN_SHELL('',(#190643)); +#190643 = ADVANCED_FACE('',(#190644,#190722),#190774,.T.); +#190644 = FACE_BOUND('',#190645,.F.); +#190645 = EDGE_LOOP('',(#190646,#190657,#190665,#190674,#190682,#190691, + #190699,#190707,#190716)); +#190646 = ORIENTED_EDGE('',*,*,#190647,.T.); +#190647 = EDGE_CURVE('',#190648,#190650,#190652,.T.); +#190648 = VERTEX_POINT('',#190649); +#190649 = CARTESIAN_POINT('',(127.260948,-85.115287,1.585)); +#190650 = VERTEX_POINT('',#190651); +#190651 = CARTESIAN_POINT('',(127.334507,-85.054919,1.585)); +#190652 = CIRCLE('',#190653,7.500074938986E-02); +#190653 = AXIS2_PLACEMENT_3D('',#190654,#190655,#190656); +#190654 = CARTESIAN_POINT('',(127.33450746611,-85.12991974938,1.585)); +#190655 = DIRECTION('',(0.,0.,-1.)); +#190656 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#190657 = ORIENTED_EDGE('',*,*,#190658,.T.); +#190658 = EDGE_CURVE('',#190650,#190659,#190661,.T.); +#190659 = VERTEX_POINT('',#190660); +#190660 = CARTESIAN_POINT('',(127.730091,-85.05636,1.585)); +#190661 = LINE('',#190662,#190663); +#190662 = CARTESIAN_POINT('',(127.334507,-85.054919,1.585)); +#190663 = VECTOR('',#190664,1.); +#190664 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#190665 = ORIENTED_EDGE('',*,*,#190666,.T.); +#190666 = EDGE_CURVE('',#190659,#190667,#190669,.T.); +#190667 = VERTEX_POINT('',#190668); +#190668 = CARTESIAN_POINT('',(127.979494,-85.305763,1.585)); +#190669 = CIRCLE('',#190670,0.347870264855); +#190670 = AXIS2_PLACEMENT_3D('',#190671,#190672,#190673); +#190671 = CARTESIAN_POINT('',(127.64276326502,-85.39309073497,1.585)); +#190672 = DIRECTION('',(0.,0.,-1.)); +#190673 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#190674 = ORIENTED_EDGE('',*,*,#190675,.T.); +#190675 = EDGE_CURVE('',#190667,#190676,#190678,.T.); +#190676 = VERTEX_POINT('',#190677); +#190677 = CARTESIAN_POINT('',(127.978272,-85.483062,1.585)); +#190678 = LINE('',#190679,#190680); +#190679 = CARTESIAN_POINT('',(127.979494,-85.305763,1.585)); +#190680 = VECTOR('',#190681,1.); +#190681 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#190682 = ORIENTED_EDGE('',*,*,#190683,.T.); +#190683 = EDGE_CURVE('',#190676,#190684,#190686,.T.); +#190684 = VERTEX_POINT('',#190685); +#190685 = CARTESIAN_POINT('',(127.730091,-85.727287,1.585)); +#190686 = CIRCLE('',#190687,0.348632345849); +#190687 = AXIS2_PLACEMENT_3D('',#190688,#190689,#190690); +#190688 = CARTESIAN_POINT('',(127.64232219403,-85.3898834593,1.585)); +#190689 = DIRECTION('',(0.,0.,-1.)); +#190690 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#190691 = ORIENTED_EDGE('',*,*,#190692,.T.); +#190692 = EDGE_CURVE('',#190684,#190693,#190695,.T.); +#190693 = VERTEX_POINT('',#190694); +#190694 = CARTESIAN_POINT('',(127.409507,-85.728728,1.585)); +#190695 = LINE('',#190696,#190697); +#190696 = CARTESIAN_POINT('',(127.730091,-85.727287,1.585)); +#190697 = VECTOR('',#190698,1.); +#190698 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#190699 = ORIENTED_EDGE('',*,*,#190700,.T.); +#190700 = EDGE_CURVE('',#190693,#190701,#190703,.T.); +#190701 = VERTEX_POINT('',#190702); +#190702 = CARTESIAN_POINT('',(127.408066,-86.144551,1.585)); +#190703 = LINE('',#190704,#190705); +#190704 = CARTESIAN_POINT('',(127.409507,-85.728728,1.585)); +#190705 = VECTOR('',#190706,1.); +#190706 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#190707 = ORIENTED_EDGE('',*,*,#190708,.T.); +#190708 = EDGE_CURVE('',#190701,#190709,#190711,.T.); +#190709 = VERTEX_POINT('',#190710); +#190710 = CARTESIAN_POINT('',(127.259507,-86.129919,1.585)); +#190711 = CIRCLE('',#190712,7.500006711464E-02); +#190712 = AXIS2_PLACEMENT_3D('',#190713,#190714,#190715); +#190713 = CARTESIAN_POINT('',(127.33450706711,-86.12991906711,1.585)); +#190714 = DIRECTION('',(-0.,0.,-1.)); +#190715 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#190716 = ORIENTED_EDGE('',*,*,#190717,.T.); +#190717 = EDGE_CURVE('',#190709,#190648,#190718,.T.); +#190718 = LINE('',#190719,#190720); +#190719 = CARTESIAN_POINT('',(127.259507,-86.129919,1.585)); +#190720 = VECTOR('',#190721,1.); +#190721 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#190722 = FACE_BOUND('',#190723,.F.); +#190723 = EDGE_LOOP('',(#190724,#190735,#190743,#190751,#190759,#190768) + ); +#190724 = ORIENTED_EDGE('',*,*,#190725,.T.); +#190725 = EDGE_CURVE('',#190726,#190728,#190730,.T.); +#190726 = VERTEX_POINT('',#190727); +#190727 = CARTESIAN_POINT('',(127.830935,-85.3381,1.585)); +#190728 = VERTEX_POINT('',#190729); +#190729 = CARTESIAN_POINT('',(127.697754,-85.204919,1.585)); +#190730 = CIRCLE('',#190731,0.18686440374); +#190731 = AXIS2_PLACEMENT_3D('',#190732,#190733,#190734); +#190732 = CARTESIAN_POINT('',(127.650218,-85.385636,1.585)); +#190733 = DIRECTION('',(0.,0.,1.)); +#190734 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#190735 = ORIENTED_EDGE('',*,*,#190736,.T.); +#190736 = EDGE_CURVE('',#190728,#190737,#190739,.T.); +#190737 = VERTEX_POINT('',#190738); +#190738 = CARTESIAN_POINT('',(127.409507,-85.204919,1.585)); +#190739 = LINE('',#190740,#190741); +#190740 = CARTESIAN_POINT('',(127.697754,-85.204919,1.585)); +#190741 = VECTOR('',#190742,1.); +#190742 = DIRECTION('',(-1.,0.,0.)); +#190743 = ORIENTED_EDGE('',*,*,#190744,.T.); +#190744 = EDGE_CURVE('',#190737,#190745,#190747,.T.); +#190745 = VERTEX_POINT('',#190746); +#190746 = CARTESIAN_POINT('',(127.409507,-85.578728,1.585)); +#190747 = LINE('',#190748,#190749); +#190748 = CARTESIAN_POINT('',(127.409507,-85.204919,1.585)); +#190749 = VECTOR('',#190750,1.); +#190750 = DIRECTION('',(0.,-1.,0.)); +#190751 = ORIENTED_EDGE('',*,*,#190752,.T.); +#190752 = EDGE_CURVE('',#190745,#190753,#190755,.T.); +#190753 = VERTEX_POINT('',#190754); +#190754 = CARTESIAN_POINT('',(127.697754,-85.578728,1.585)); +#190755 = LINE('',#190756,#190757); +#190756 = CARTESIAN_POINT('',(127.409507,-85.578728,1.585)); +#190757 = VECTOR('',#190758,1.); +#190758 = DIRECTION('',(1.,0.,0.)); +#190759 = ORIENTED_EDGE('',*,*,#190760,.T.); +#190760 = EDGE_CURVE('',#190753,#190761,#190763,.T.); +#190761 = VERTEX_POINT('',#190762); +#190762 = CARTESIAN_POINT('',(127.830935,-85.445547,1.585)); +#190763 = CIRCLE('',#190764,0.18686440374); +#190764 = AXIS2_PLACEMENT_3D('',#190765,#190766,#190767); +#190765 = CARTESIAN_POINT('',(127.650218,-85.398011,1.585)); +#190766 = DIRECTION('',(0.,0.,1.)); +#190767 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#190768 = ORIENTED_EDGE('',*,*,#190769,.T.); +#190769 = EDGE_CURVE('',#190761,#190726,#190770,.T.); +#190770 = LINE('',#190771,#190772); +#190771 = CARTESIAN_POINT('',(127.830935,-85.445547,1.585)); +#190772 = VECTOR('',#190773,1.); +#190773 = DIRECTION('',(0.,1.,0.)); +#190774 = PLANE('',#190775); +#190775 = AXIS2_PLACEMENT_3D('',#190776,#190777,#190778); +#190776 = CARTESIAN_POINT('',(0.,0.,1.585)); +#190777 = DIRECTION('',(0.,0.,1.)); +#190778 = DIRECTION('',(1.,0.,-0.)); +#190779 = SHELL_BASED_SURFACE_MODEL('',(#190780)); +#190780 = OPEN_SHELL('',(#190781)); +#190781 = ADVANCED_FACE('',(#190782),#191023,.T.); +#190782 = FACE_BOUND('',#190783,.F.); +#190783 = EDGE_LOOP('',(#190784,#190795,#190803,#190811,#190819,#190827, + #190836,#190844,#190853,#190861,#190869,#190877,#190885,#190893, + #190901,#190910,#190918,#190926,#190934,#190942,#190951,#190959, + #190967,#190975,#190984,#190992,#191000,#191008,#191017)); +#190784 = ORIENTED_EDGE('',*,*,#190785,.T.); +#190785 = EDGE_CURVE('',#190786,#190788,#190790,.T.); +#190786 = VERTEX_POINT('',#190787); +#190787 = CARTESIAN_POINT('',(148.258882,-85.549999,1.585)); +#190788 = VERTEX_POINT('',#190789); +#190789 = CARTESIAN_POINT('',(148.323882,-85.484999,1.585)); +#190790 = CIRCLE('',#190791,6.500103935393E-02); +#190791 = AXIS2_PLACEMENT_3D('',#190792,#190793,#190794); +#190792 = CARTESIAN_POINT('',(148.32388303934,-85.55000003934,1.585)); +#190793 = DIRECTION('',(0.,0.,-1.)); +#190794 = DIRECTION('',(-0.999999999872,1.598967714806E-05,0.)); +#190795 = ORIENTED_EDGE('',*,*,#190796,.T.); +#190796 = EDGE_CURVE('',#190788,#190797,#190799,.T.); +#190797 = VERTEX_POINT('',#190798); +#190798 = CARTESIAN_POINT('',(148.623882,-85.484999,1.585)); +#190799 = LINE('',#190800,#190801); +#190800 = CARTESIAN_POINT('',(148.323882,-85.484999,1.585)); +#190801 = VECTOR('',#190802,1.); +#190802 = DIRECTION('',(1.,0.,0.)); +#190803 = ORIENTED_EDGE('',*,*,#190804,.T.); +#190804 = EDGE_CURVE('',#190797,#190805,#190807,.T.); +#190805 = VERTEX_POINT('',#190806); +#190806 = CARTESIAN_POINT('',(148.648756,-85.489947,1.585)); +#190807 = LINE('',#190808,#190809); +#190808 = CARTESIAN_POINT('',(148.623882,-85.484999,1.585)); +#190809 = VECTOR('',#190810,1.); +#190810 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#190811 = ORIENTED_EDGE('',*,*,#190812,.T.); +#190812 = EDGE_CURVE('',#190805,#190813,#190815,.T.); +#190813 = VERTEX_POINT('',#190814); +#190814 = CARTESIAN_POINT('',(148.669843,-85.504037,1.585)); +#190815 = LINE('',#190816,#190817); +#190816 = CARTESIAN_POINT('',(148.648756,-85.489947,1.585)); +#190817 = VECTOR('',#190818,1.); +#190818 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#190819 = ORIENTED_EDGE('',*,*,#190820,.T.); +#190820 = EDGE_CURVE('',#190813,#190821,#190823,.T.); +#190821 = VERTEX_POINT('',#190822); +#190822 = CARTESIAN_POINT('',(148.721003,-85.559318,1.585)); +#190823 = LINE('',#190824,#190825); +#190824 = CARTESIAN_POINT('',(148.669843,-85.504037,1.585)); +#190825 = VECTOR('',#190826,1.); +#190826 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#190827 = ORIENTED_EDGE('',*,*,#190828,.T.); +#190828 = EDGE_CURVE('',#190821,#190829,#190831,.T.); +#190829 = VERTEX_POINT('',#190830); +#190830 = CARTESIAN_POINT('',(148.720999,-85.969256,1.585)); +#190831 = CIRCLE('',#190832,0.409312568567); +#190832 = AXIS2_PLACEMENT_3D('',#190833,#190834,#190835); +#190833 = CARTESIAN_POINT('',(148.36670664806,-85.76428354294,1.585)); +#190834 = DIRECTION('',(0.,0.,-1.)); +#190835 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#190836 = ORIENTED_EDGE('',*,*,#190837,.T.); +#190837 = EDGE_CURVE('',#190829,#190838,#190840,.T.); +#190838 = VERTEX_POINT('',#190839); +#190839 = CARTESIAN_POINT('',(148.618322,-86.073179,1.585)); +#190840 = LINE('',#190841,#190842); +#190841 = CARTESIAN_POINT('',(148.720999,-85.969256,1.585)); +#190842 = VECTOR('',#190843,1.); +#190843 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#190844 = ORIENTED_EDGE('',*,*,#190845,.T.); +#190845 = EDGE_CURVE('',#190838,#190846,#190848,.T.); +#190846 = VERTEX_POINT('',#190847); +#190847 = CARTESIAN_POINT('',(148.179546,-86.170201,1.585)); +#190848 = CIRCLE('',#190849,0.675422176574); +#190849 = AXIS2_PLACEMENT_3D('',#190850,#190851,#190852); +#190850 = CARTESIAN_POINT('',(148.26141275007,-85.49975864465,1.585)); +#190851 = DIRECTION('',(0.,0.,-1.)); +#190852 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#190853 = ORIENTED_EDGE('',*,*,#190854,.T.); +#190854 = EDGE_CURVE('',#190846,#190855,#190857,.T.); +#190855 = VERTEX_POINT('',#190856); +#190856 = CARTESIAN_POINT('',(147.994813,-86.122423,1.585)); +#190857 = LINE('',#190858,#190859); +#190858 = CARTESIAN_POINT('',(148.179546,-86.170201,1.585)); +#190859 = VECTOR('',#190860,1.); +#190860 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#190861 = ORIENTED_EDGE('',*,*,#190862,.T.); +#190862 = EDGE_CURVE('',#190855,#190863,#190865,.T.); +#190863 = VERTEX_POINT('',#190864); +#190864 = CARTESIAN_POINT('',(147.892206,-86.06739,1.585)); +#190865 = LINE('',#190866,#190867); +#190866 = CARTESIAN_POINT('',(147.994813,-86.122423,1.585)); +#190867 = VECTOR('',#190868,1.); +#190868 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#190869 = ORIENTED_EDGE('',*,*,#190870,.T.); +#190870 = EDGE_CURVE('',#190863,#190871,#190873,.T.); +#190871 = VERTEX_POINT('',#190872); +#190872 = CARTESIAN_POINT('',(147.798191,-85.969252,1.585)); +#190873 = LINE('',#190874,#190875); +#190874 = CARTESIAN_POINT('',(147.892206,-86.06739,1.585)); +#190875 = VECTOR('',#190876,1.); +#190876 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#190877 = ORIENTED_EDGE('',*,*,#190878,.T.); +#190878 = EDGE_CURVE('',#190871,#190879,#190881,.T.); +#190879 = VERTEX_POINT('',#190880); +#190880 = CARTESIAN_POINT('',(147.74663,-85.817364,1.585)); +#190881 = LINE('',#190882,#190883); +#190882 = CARTESIAN_POINT('',(147.798191,-85.969252,1.585)); +#190883 = VECTOR('',#190884,1.); +#190884 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#190885 = ORIENTED_EDGE('',*,*,#190886,.T.); +#190886 = EDGE_CURVE('',#190879,#190887,#190889,.T.); +#190887 = VERTEX_POINT('',#190888); +#190888 = CARTESIAN_POINT('',(147.747512,-85.663914,1.585)); +#190889 = LINE('',#190890,#190891); +#190890 = CARTESIAN_POINT('',(147.74663,-85.817364,1.585)); +#190891 = VECTOR('',#190892,1.); +#190892 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#190893 = ORIENTED_EDGE('',*,*,#190894,.T.); +#190894 = EDGE_CURVE('',#190887,#190895,#190897,.T.); +#190895 = VERTEX_POINT('',#190896); +#190896 = CARTESIAN_POINT('',(147.794316,-85.563787,1.585)); +#190897 = LINE('',#190898,#190899); +#190898 = CARTESIAN_POINT('',(147.747512,-85.663914,1.585)); +#190899 = VECTOR('',#190900,1.); +#190900 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#190901 = ORIENTED_EDGE('',*,*,#190902,.T.); +#190902 = EDGE_CURVE('',#190895,#190903,#190905,.T.); +#190903 = VERTEX_POINT('',#190904); +#190904 = CARTESIAN_POINT('',(147.910592,-85.621925,1.585)); +#190905 = CIRCLE('',#190906,6.500026004258E-02); +#190906 = AXIS2_PLACEMENT_3D('',#190907,#190908,#190909); +#190907 = CARTESIAN_POINT('',(147.85245365279,-85.5928566944,1.585)); +#190908 = DIRECTION('',(0.,0.,-1.)); +#190909 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#190910 = ORIENTED_EDGE('',*,*,#190911,.T.); +#190911 = EDGE_CURVE('',#190903,#190912,#190914,.T.); +#190912 = VERTEX_POINT('',#190913); +#190913 = CARTESIAN_POINT('',(147.874597,-85.693915,1.585)); +#190914 = LINE('',#190915,#190916); +#190915 = CARTESIAN_POINT('',(147.910592,-85.621925,1.585)); +#190916 = VECTOR('',#190917,1.); +#190917 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#190918 = ORIENTED_EDGE('',*,*,#190919,.T.); +#190919 = EDGE_CURVE('',#190912,#190920,#190922,.T.); +#190920 = VERTEX_POINT('',#190921); +#190921 = CARTESIAN_POINT('',(147.874597,-85.796595,1.585)); +#190922 = LINE('',#190923,#190924); +#190923 = CARTESIAN_POINT('',(147.874597,-85.693915,1.585)); +#190924 = VECTOR('',#190925,1.); +#190925 = DIRECTION('',(0.,-1.,0.)); +#190926 = ORIENTED_EDGE('',*,*,#190927,.T.); +#190927 = EDGE_CURVE('',#190920,#190928,#190930,.T.); +#190928 = VERTEX_POINT('',#190929); +#190929 = CARTESIAN_POINT('',(147.909265,-85.9006,1.585)); +#190930 = LINE('',#190931,#190932); +#190931 = CARTESIAN_POINT('',(147.874597,-85.796595,1.585)); +#190932 = VECTOR('',#190933,1.); +#190933 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#190934 = ORIENTED_EDGE('',*,*,#190935,.T.); +#190935 = EDGE_CURVE('',#190928,#190936,#190938,.T.); +#190936 = VERTEX_POINT('',#190937); +#190937 = CARTESIAN_POINT('',(147.976669,-85.968006,1.585)); +#190938 = LINE('',#190939,#190940); +#190939 = CARTESIAN_POINT('',(147.909265,-85.9006,1.585)); +#190940 = VECTOR('',#190941,1.); +#190941 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#190942 = ORIENTED_EDGE('',*,*,#190943,.T.); +#190943 = EDGE_CURVE('',#190936,#190944,#190946,.T.); +#190944 = VERTEX_POINT('',#190945); +#190945 = CARTESIAN_POINT('',(148.315881,-86.042142,1.585)); +#190946 = CIRCLE('',#190947,0.553317785495); +#190947 = AXIS2_PLACEMENT_3D('',#190948,#190949,#190950); +#190948 = CARTESIAN_POINT('',(148.2584500839,-85.49181276979,1.585)); +#190949 = DIRECTION('',(0.,0.,1.)); +#190950 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#190951 = ORIENTED_EDGE('',*,*,#190952,.T.); +#190952 = EDGE_CURVE('',#190944,#190953,#190955,.T.); +#190953 = VERTEX_POINT('',#190954); +#190954 = CARTESIAN_POINT('',(148.472622,-86.002956,1.585)); +#190955 = LINE('',#190956,#190957); +#190956 = CARTESIAN_POINT('',(148.315881,-86.042142,1.585)); +#190957 = VECTOR('',#190958,1.); +#190958 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#190959 = ORIENTED_EDGE('',*,*,#190960,.T.); +#190960 = EDGE_CURVE('',#190953,#190961,#190963,.T.); +#190961 = VERTEX_POINT('',#190962); +#190962 = CARTESIAN_POINT('',(148.542522,-85.968007,1.585)); +#190963 = LINE('',#190964,#190965); +#190964 = CARTESIAN_POINT('',(148.472622,-86.002956,1.585)); +#190965 = VECTOR('',#190966,1.); +#190966 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#190967 = ORIENTED_EDGE('',*,*,#190968,.T.); +#190968 = EDGE_CURVE('',#190961,#190969,#190971,.T.); +#190969 = VERTEX_POINT('',#190970); +#190970 = CARTESIAN_POINT('',(148.609928,-85.9006,1.585)); +#190971 = LINE('',#190972,#190973); +#190972 = CARTESIAN_POINT('',(148.542522,-85.968007,1.585)); +#190973 = VECTOR('',#190974,1.); +#190974 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#190975 = ORIENTED_EDGE('',*,*,#190976,.T.); +#190976 = EDGE_CURVE('',#190969,#190977,#190979,.T.); +#190977 = VERTEX_POINT('',#190978); +#190978 = CARTESIAN_POINT('',(148.609928,-85.627968,1.585)); +#190979 = CIRCLE('',#190980,0.272194686174); +#190980 = AXIS2_PLACEMENT_3D('',#190981,#190982,#190983); +#190981 = CARTESIAN_POINT('',(148.37432686391,-85.764284,1.585)); +#190982 = DIRECTION('',(0.,-0.,1.)); +#190983 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#190984 = ORIENTED_EDGE('',*,*,#190985,.T.); +#190985 = EDGE_CURVE('',#190977,#190986,#190988,.T.); +#190986 = VERTEX_POINT('',#190987); +#190987 = CARTESIAN_POINT('',(148.596959,-85.614999,1.585)); +#190988 = LINE('',#190989,#190990); +#190989 = CARTESIAN_POINT('',(148.609928,-85.627968,1.585)); +#190990 = VECTOR('',#190991,1.); +#190991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#190992 = ORIENTED_EDGE('',*,*,#190993,.T.); +#190993 = EDGE_CURVE('',#190986,#190994,#190996,.T.); +#190994 = VERTEX_POINT('',#190995); +#190995 = CARTESIAN_POINT('',(148.388882,-85.614999,1.585)); +#190996 = LINE('',#190997,#190998); +#190997 = CARTESIAN_POINT('',(148.596959,-85.614999,1.585)); +#190998 = VECTOR('',#190999,1.); +#190999 = DIRECTION('',(-1.,0.,0.)); +#191000 = ORIENTED_EDGE('',*,*,#191001,.T.); +#191001 = EDGE_CURVE('',#190994,#191002,#191004,.T.); +#191002 = VERTEX_POINT('',#191003); +#191003 = CARTESIAN_POINT('',(148.388882,-85.721428,1.585)); +#191004 = LINE('',#191005,#191006); +#191005 = CARTESIAN_POINT('',(148.388882,-85.614999,1.585)); +#191006 = VECTOR('',#191007,1.); +#191007 = DIRECTION('',(0.,-1.,0.)); +#191008 = ORIENTED_EDGE('',*,*,#191009,.T.); +#191009 = EDGE_CURVE('',#191002,#191010,#191012,.T.); +#191010 = VERTEX_POINT('',#191011); +#191011 = CARTESIAN_POINT('',(148.258882,-85.721428,1.585)); +#191012 = CIRCLE('',#191013,6.500000000092E-02); +#191013 = AXIS2_PLACEMENT_3D('',#191014,#191015,#191016); +#191014 = CARTESIAN_POINT('',(148.323882,-85.72142765513,1.585)); +#191015 = DIRECTION('',(-0.,0.,-1.)); +#191016 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#191017 = ORIENTED_EDGE('',*,*,#191018,.T.); +#191018 = EDGE_CURVE('',#191010,#190786,#191019,.T.); +#191019 = LINE('',#191020,#191021); +#191020 = CARTESIAN_POINT('',(148.258882,-85.721428,1.585)); +#191021 = VECTOR('',#191022,1.); +#191022 = DIRECTION('',(0.,1.,0.)); +#191023 = PLANE('',#191024); +#191024 = AXIS2_PLACEMENT_3D('',#191025,#191026,#191027); +#191025 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191026 = DIRECTION('',(0.,0.,1.)); +#191027 = DIRECTION('',(1.,0.,-0.)); +#191028 = SHELL_BASED_SURFACE_MODEL('',(#191029)); +#191029 = OPEN_SHELL('',(#191030)); +#191030 = ADVANCED_FACE('',(#191031,#191204),#191256,.T.); +#191031 = FACE_BOUND('',#191032,.F.); +#191032 = EDGE_LOOP('',(#191033,#191044,#191052,#191061,#191069,#191077, + #191085,#191093,#191101,#191109,#191117,#191125,#191133,#191141, + #191149,#191157,#191165,#191173,#191182,#191190,#191198)); +#191033 = ORIENTED_EDGE('',*,*,#191034,.T.); +#191034 = EDGE_CURVE('',#191035,#191037,#191039,.T.); +#191035 = VERTEX_POINT('',#191036); +#191036 = CARTESIAN_POINT('',(82.683526,-84.62569,1.585)); +#191037 = VERTEX_POINT('',#191038); +#191038 = CARTESIAN_POINT('',(82.683526,-84.331454,1.585)); +#191039 = CIRCLE('',#191040,0.150000292066); +#191040 = AXIS2_PLACEMENT_3D('',#191041,#191042,#191043); +#191041 = CARTESIAN_POINT('',(82.71279,-84.478572,1.585)); +#191042 = DIRECTION('',(0.,0.,-1.)); +#191043 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#191044 = ORIENTED_EDGE('',*,*,#191045,.T.); +#191045 = EDGE_CURVE('',#191037,#191046,#191048,.T.); +#191046 = VERTEX_POINT('',#191047); +#191047 = CARTESIAN_POINT('',(85.342054,-84.331454,1.585)); +#191048 = LINE('',#191049,#191050); +#191049 = CARTESIAN_POINT('',(82.683526,-84.331454,1.585)); +#191050 = VECTOR('',#191051,1.); +#191051 = DIRECTION('',(1.,0.,0.)); +#191052 = ORIENTED_EDGE('',*,*,#191053,.T.); +#191053 = EDGE_CURVE('',#191046,#191054,#191056,.T.); +#191054 = VERTEX_POINT('',#191055); +#191055 = CARTESIAN_POINT('',(85.459908,-84.449308,1.585)); +#191056 = CIRCLE('',#191057,0.150002525551); +#191057 = AXIS2_PLACEMENT_3D('',#191058,#191059,#191060); +#191058 = CARTESIAN_POINT('',(85.312788100587,-84.47857389941,1.585)); +#191059 = DIRECTION('',(0.,0.,-1.)); +#191060 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#191061 = ORIENTED_EDGE('',*,*,#191062,.T.); +#191062 = EDGE_CURVE('',#191054,#191063,#191065,.T.); +#191063 = VERTEX_POINT('',#191064); +#191064 = CARTESIAN_POINT('',(85.459908,-85.498312,1.585)); +#191065 = LINE('',#191066,#191067); +#191066 = CARTESIAN_POINT('',(85.459908,-84.449308,1.585)); +#191067 = VECTOR('',#191068,1.); +#191068 = DIRECTION('',(0.,-1.,0.)); +#191069 = ORIENTED_EDGE('',*,*,#191070,.T.); +#191070 = EDGE_CURVE('',#191063,#191071,#191073,.T.); +#191071 = VERTEX_POINT('',#191072); +#191072 = CARTESIAN_POINT('',(85.446954,-85.53613,1.585)); +#191073 = LINE('',#191074,#191075); +#191074 = CARTESIAN_POINT('',(85.459908,-85.498312,1.585)); +#191075 = VECTOR('',#191076,1.); +#191076 = DIRECTION('',(-0.324051862119,-0.946039317712,0.)); +#191077 = ORIENTED_EDGE('',*,*,#191078,.T.); +#191078 = EDGE_CURVE('',#191071,#191079,#191081,.T.); +#191079 = VERTEX_POINT('',#191080); +#191080 = CARTESIAN_POINT('',(85.307479,-85.808635,1.585)); +#191081 = LINE('',#191082,#191083); +#191082 = CARTESIAN_POINT('',(85.446954,-85.53613,1.585)); +#191083 = VECTOR('',#191084,1.); +#191084 = DIRECTION('',(-0.455615180679,-0.890176840372,0.)); +#191085 = ORIENTED_EDGE('',*,*,#191086,.T.); +#191086 = EDGE_CURVE('',#191079,#191087,#191089,.T.); +#191087 = VERTEX_POINT('',#191088); +#191088 = CARTESIAN_POINT('',(85.148507,-85.965198,1.585)); +#191089 = LINE('',#191090,#191091); +#191090 = CARTESIAN_POINT('',(85.307479,-85.808635,1.585)); +#191091 = VECTOR('',#191092,1.); +#191092 = DIRECTION('',(-0.712484531253,-0.701687817141,0.)); +#191093 = ORIENTED_EDGE('',*,*,#191094,.T.); +#191094 = EDGE_CURVE('',#191087,#191095,#191097,.T.); +#191095 = VERTEX_POINT('',#191096); +#191096 = CARTESIAN_POINT('',(84.85717,-86.10896,1.585)); +#191097 = LINE('',#191098,#191099); +#191098 = CARTESIAN_POINT('',(85.148507,-85.965198,1.585)); +#191099 = VECTOR('',#191100,1.); +#191100 = DIRECTION('',(-0.89676222334,-0.442512728393,0.)); +#191101 = ORIENTED_EDGE('',*,*,#191102,.T.); +#191102 = EDGE_CURVE('',#191095,#191103,#191105,.T.); +#191103 = VERTEX_POINT('',#191104); +#191104 = CARTESIAN_POINT('',(84.817552,-86.114286,1.585)); +#191105 = LINE('',#191106,#191107); +#191106 = CARTESIAN_POINT('',(84.85717,-86.10896,1.585)); +#191107 = VECTOR('',#191108,1.); +#191108 = DIRECTION('',(-0.99108443516,-0.133235289557,0.)); +#191109 = ORIENTED_EDGE('',*,*,#191110,.T.); +#191110 = EDGE_CURVE('',#191103,#191111,#191113,.T.); +#191111 = VERTEX_POINT('',#191112); +#191112 = CARTESIAN_POINT('',(84.416859,-86.111404,1.585)); +#191113 = LINE('',#191114,#191115); +#191114 = CARTESIAN_POINT('',(84.817552,-86.114286,1.585)); +#191115 = VECTOR('',#191116,1.); +#191116 = DIRECTION('',(-0.999974134695,7.192352889135E-03,0.)); +#191117 = ORIENTED_EDGE('',*,*,#191118,.T.); +#191118 = EDGE_CURVE('',#191111,#191119,#191121,.T.); +#191119 = VERTEX_POINT('',#191120); +#191120 = CARTESIAN_POINT('',(84.379041,-86.09845,1.585)); +#191121 = LINE('',#191122,#191123); +#191122 = CARTESIAN_POINT('',(84.416859,-86.111404,1.585)); +#191123 = VECTOR('',#191124,1.); +#191124 = DIRECTION('',(-0.946039317712,0.324051862119,0.)); +#191125 = ORIENTED_EDGE('',*,*,#191126,.T.); +#191126 = EDGE_CURVE('',#191119,#191127,#191129,.T.); +#191127 = VERTEX_POINT('',#191128); +#191128 = CARTESIAN_POINT('',(84.106537,-85.958976,1.585)); +#191129 = LINE('',#191130,#191131); +#191130 = CARTESIAN_POINT('',(84.379041,-86.09845,1.585)); +#191131 = VECTOR('',#191132,1.); +#191132 = DIRECTION('',(-0.890177487146,0.455613917015,0.)); +#191133 = ORIENTED_EDGE('',*,*,#191134,.T.); +#191134 = EDGE_CURVE('',#191127,#191135,#191137,.T.); +#191135 = VERTEX_POINT('',#191136); +#191136 = CARTESIAN_POINT('',(83.949974,-85.800002,1.585)); +#191137 = LINE('',#191138,#191139); +#191138 = CARTESIAN_POINT('',(84.106537,-85.958976,1.585)); +#191139 = VECTOR('',#191140,1.); +#191140 = DIRECTION('',(-0.701683335855,0.712488944605,0.)); +#191141 = ORIENTED_EDGE('',*,*,#191142,.T.); +#191142 = EDGE_CURVE('',#191135,#191143,#191145,.T.); +#191143 = VERTEX_POINT('',#191144); +#191144 = CARTESIAN_POINT('',(83.806211,-85.508667,1.585)); +#191145 = LINE('',#191146,#191147); +#191146 = CARTESIAN_POINT('',(83.949974,-85.800002,1.585)); +#191147 = VECTOR('',#191148,1.); +#191148 = DIRECTION('',(-0.442517646706,0.896759796352,0.)); +#191149 = ORIENTED_EDGE('',*,*,#191150,.T.); +#191150 = EDGE_CURVE('',#191143,#191151,#191153,.T.); +#191151 = VERTEX_POINT('',#191152); +#191152 = CARTESIAN_POINT('',(83.800885,-85.469048,1.585)); +#191153 = LINE('',#191154,#191155); +#191154 = CARTESIAN_POINT('',(83.806211,-85.508667,1.585)); +#191155 = VECTOR('',#191156,1.); +#191156 = DIRECTION('',(-0.133231986338,0.991084879219,0.)); +#191157 = ORIENTED_EDGE('',*,*,#191158,.T.); +#191158 = EDGE_CURVE('',#191151,#191159,#191161,.T.); +#191159 = VERTEX_POINT('',#191160); +#191160 = CARTESIAN_POINT('',(83.800885,-85.385718,1.585)); +#191161 = LINE('',#191162,#191163); +#191162 = CARTESIAN_POINT('',(83.800885,-85.469048,1.585)); +#191163 = VECTOR('',#191164,1.); +#191164 = DIRECTION('',(0.,1.,0.)); +#191165 = ORIENTED_EDGE('',*,*,#191166,.T.); +#191166 = EDGE_CURVE('',#191159,#191167,#191169,.T.); +#191167 = VERTEX_POINT('',#191168); +#191168 = CARTESIAN_POINT('',(82.773183,-86.101592,1.585)); +#191169 = LINE('',#191170,#191171); +#191170 = CARTESIAN_POINT('',(83.800885,-85.385718,1.585)); +#191171 = VECTOR('',#191172,1.); +#191172 = DIRECTION('',(-0.820549135382,-0.571575993569,0.)); +#191173 = ORIENTED_EDGE('',*,*,#191174,.T.); +#191174 = EDGE_CURVE('',#191167,#191175,#191177,.T.); +#191175 = VERTEX_POINT('',#191176); +#191176 = CARTESIAN_POINT('',(82.604449,-85.860544,1.585)); +#191177 = CIRCLE('',#191178,0.150000749872); +#191178 = AXIS2_PLACEMENT_3D('',#191179,#191180,#191181); +#191179 = CARTESIAN_POINT('',(82.712790236198,-85.96428599487,1.585)); +#191180 = DIRECTION('',(0.,0.,-1.)); +#191181 = DIRECTION('',(0.402616412608,-0.915368791416,0.)); +#191182 = ORIENTED_EDGE('',*,*,#191183,.T.); +#191183 = EDGE_CURVE('',#191175,#191184,#191186,.T.); +#191184 = VERTEX_POINT('',#191185); +#191185 = CARTESIAN_POINT('',(83.800885,-85.019521,1.585)); +#191186 = LINE('',#191187,#191188); +#191187 = CARTESIAN_POINT('',(82.604449,-85.860544,1.585)); +#191188 = VECTOR('',#191189,1.); +#191189 = DIRECTION('',(0.818100273852,0.575075596702,0.)); +#191190 = ORIENTED_EDGE('',*,*,#191191,.T.); +#191191 = EDGE_CURVE('',#191184,#191192,#191194,.T.); +#191192 = VERTEX_POINT('',#191193); +#191193 = CARTESIAN_POINT('',(83.800885,-84.628572,1.585)); +#191194 = LINE('',#191195,#191196); +#191195 = CARTESIAN_POINT('',(83.800885,-85.019521,1.585)); +#191196 = VECTOR('',#191197,1.); +#191197 = DIRECTION('',(0.,1.,0.)); +#191198 = ORIENTED_EDGE('',*,*,#191199,.T.); +#191199 = EDGE_CURVE('',#191192,#191035,#191200,.T.); +#191200 = LINE('',#191201,#191202); +#191201 = CARTESIAN_POINT('',(83.800885,-84.628572,1.585)); +#191202 = VECTOR('',#191203,1.); +#191203 = DIRECTION('',(-0.999996673632,2.579287778956E-03,0.)); +#191204 = FACE_BOUND('',#191205,.F.); +#191205 = EDGE_LOOP('',(#191206,#191217,#191225,#191233,#191241,#191250) + ); +#191206 = ORIENTED_EDGE('',*,*,#191207,.T.); +#191207 = EDGE_CURVE('',#191208,#191210,#191212,.T.); +#191208 = VERTEX_POINT('',#191209); +#191209 = CARTESIAN_POINT('',(84.782142,-85.814286,1.585)); +#191210 = VERTEX_POINT('',#191211); +#191211 = CARTESIAN_POINT('',(85.16279,-85.433637,1.585)); +#191212 = CIRCLE('',#191213,0.536607521284); +#191213 = AXIS2_PLACEMENT_3D('',#191214,#191215,#191216); +#191214 = CARTESIAN_POINT('',(84.644211862354,-85.2957082247,1.585)); +#191215 = DIRECTION('',(0.,0.,1.)); +#191216 = DIRECTION('',(0.257041007022,-0.966400497056,0.)); +#191217 = ORIENTED_EDGE('',*,*,#191218,.T.); +#191218 = EDGE_CURVE('',#191210,#191219,#191221,.T.); +#191219 = VERTEX_POINT('',#191220); +#191220 = CARTESIAN_POINT('',(85.16279,-84.628572,1.585)); +#191221 = LINE('',#191222,#191223); +#191222 = CARTESIAN_POINT('',(85.16279,-85.433637,1.585)); +#191223 = VECTOR('',#191224,1.); +#191224 = DIRECTION('',(0.,1.,0.)); +#191225 = ORIENTED_EDGE('',*,*,#191226,.T.); +#191226 = EDGE_CURVE('',#191219,#191227,#191229,.T.); +#191227 = VERTEX_POINT('',#191228); +#191228 = CARTESIAN_POINT('',(84.100885,-84.628572,1.585)); +#191229 = LINE('',#191230,#191231); +#191230 = CARTESIAN_POINT('',(85.16279,-84.628572,1.585)); +#191231 = VECTOR('',#191232,1.); +#191232 = DIRECTION('',(-1.,0.,0.)); +#191233 = ORIENTED_EDGE('',*,*,#191234,.T.); +#191234 = EDGE_CURVE('',#191227,#191235,#191237,.T.); +#191235 = VERTEX_POINT('',#191236); +#191236 = CARTESIAN_POINT('',(84.100885,-85.433637,1.585)); +#191237 = LINE('',#191238,#191239); +#191238 = CARTESIAN_POINT('',(84.100885,-84.628572,1.585)); +#191239 = VECTOR('',#191240,1.); +#191240 = DIRECTION('',(0.,-1.,0.)); +#191241 = ORIENTED_EDGE('',*,*,#191242,.T.); +#191242 = EDGE_CURVE('',#191235,#191243,#191245,.T.); +#191243 = VERTEX_POINT('',#191244); +#191244 = CARTESIAN_POINT('',(84.481533,-85.814286,1.585)); +#191245 = CIRCLE('',#191246,0.536608239522); +#191246 = AXIS2_PLACEMENT_3D('',#191247,#191248,#191249); +#191247 = CARTESIAN_POINT('',(84.619463724711,-85.29570763764,1.585)); +#191248 = DIRECTION('',(0.,0.,1.)); +#191249 = DIRECTION('',(-0.966400972846,-0.25703921818,0.)); +#191250 = ORIENTED_EDGE('',*,*,#191251,.T.); +#191251 = EDGE_CURVE('',#191243,#191208,#191252,.T.); +#191252 = LINE('',#191253,#191254); +#191253 = CARTESIAN_POINT('',(84.481533,-85.814286,1.585)); +#191254 = VECTOR('',#191255,1.); +#191255 = DIRECTION('',(1.,0.,0.)); +#191256 = PLANE('',#191257); +#191257 = AXIS2_PLACEMENT_3D('',#191258,#191259,#191260); +#191258 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191259 = DIRECTION('',(0.,0.,1.)); +#191260 = DIRECTION('',(1.,0.,-0.)); +#191261 = SHELL_BASED_SURFACE_MODEL('',(#191262)); +#191262 = OPEN_SHELL('',(#191263)); +#191263 = ADVANCED_FACE('',(#191264,#191429),#191496,.T.); +#191264 = FACE_BOUND('',#191265,.F.); +#191265 = EDGE_LOOP('',(#191266,#191276,#191284,#191292,#191300,#191308, + #191316,#191324,#191332,#191340,#191349,#191357,#191365,#191373, + #191382,#191390,#191399,#191407,#191415,#191423)); +#191266 = ORIENTED_EDGE('',*,*,#191267,.T.); +#191267 = EDGE_CURVE('',#191268,#191270,#191272,.T.); +#191268 = VERTEX_POINT('',#191269); +#191269 = CARTESIAN_POINT('',(185.164351,-85.028145,1.585)); +#191270 = VERTEX_POINT('',#191271); +#191271 = CARTESIAN_POINT('',(185.346108,-84.938435,1.585)); +#191272 = LINE('',#191273,#191274); +#191273 = CARTESIAN_POINT('',(185.164351,-85.028145,1.585)); +#191274 = VECTOR('',#191275,1.); +#191275 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#191276 = ORIENTED_EDGE('',*,*,#191277,.T.); +#191277 = EDGE_CURVE('',#191270,#191278,#191280,.T.); +#191278 = VERTEX_POINT('',#191279); +#191279 = CARTESIAN_POINT('',(185.375162,-84.934528,1.585)); +#191280 = LINE('',#191281,#191282); +#191281 = CARTESIAN_POINT('',(185.346108,-84.938435,1.585)); +#191282 = VECTOR('',#191283,1.); +#191283 = DIRECTION('',(0.991079213316,0.133274127019,0.)); +#191284 = ORIENTED_EDGE('',*,*,#191285,.T.); +#191285 = EDGE_CURVE('',#191278,#191286,#191288,.T.); +#191286 = VERTEX_POINT('',#191287); +#191287 = CARTESIAN_POINT('',(185.625193,-84.936642,1.585)); +#191288 = LINE('',#191289,#191290); +#191289 = CARTESIAN_POINT('',(185.375162,-84.934528,1.585)); +#191290 = VECTOR('',#191291,1.); +#191291 = DIRECTION('',(0.999964258813,-8.454649396022E-03,0.)); +#191292 = ORIENTED_EDGE('',*,*,#191293,.T.); +#191293 = EDGE_CURVE('',#191286,#191294,#191296,.T.); +#191294 = VERTEX_POINT('',#191295); +#191295 = CARTESIAN_POINT('',(185.652927,-84.946141,1.585)); +#191296 = LINE('',#191297,#191298); +#191297 = CARTESIAN_POINT('',(185.625193,-84.936642,1.585)); +#191298 = VECTOR('',#191299,1.); +#191299 = DIRECTION('',(0.946048457417,-0.324025178373,0.)); +#191300 = ORIENTED_EDGE('',*,*,#191301,.T.); +#191301 = EDGE_CURVE('',#191294,#191302,#191304,.T.); +#191302 = VERTEX_POINT('',#191303); +#191303 = CARTESIAN_POINT('',(185.825457,-85.036012,1.585)); +#191304 = LINE('',#191305,#191306); +#191305 = CARTESIAN_POINT('',(185.652927,-84.946141,1.585)); +#191306 = VECTOR('',#191307,1.); +#191307 = DIRECTION('',(0.886889600195,-0.461981425023,0.)); +#191308 = ORIENTED_EDGE('',*,*,#191309,.T.); +#191309 = EDGE_CURVE('',#191302,#191310,#191312,.T.); +#191310 = VERTEX_POINT('',#191311); +#191311 = CARTESIAN_POINT('',(185.924877,-85.13848,1.585)); +#191312 = LINE('',#191313,#191314); +#191313 = CARTESIAN_POINT('',(185.825457,-85.036012,1.585)); +#191314 = VECTOR('',#191315,1.); +#191315 = DIRECTION('',(0.696351894269,-0.717700522048,0.)); +#191316 = ORIENTED_EDGE('',*,*,#191317,.T.); +#191317 = EDGE_CURVE('',#191310,#191318,#191320,.T.); +#191318 = VERTEX_POINT('',#191319); +#191319 = CARTESIAN_POINT('',(186.014588,-85.320237,1.585)); +#191320 = LINE('',#191321,#191322); +#191321 = CARTESIAN_POINT('',(185.924877,-85.13848,1.585)); +#191322 = VECTOR('',#191323,1.); +#191323 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#191324 = ORIENTED_EDGE('',*,*,#191325,.T.); +#191325 = EDGE_CURVE('',#191318,#191326,#191328,.T.); +#191326 = VERTEX_POINT('',#191327); +#191327 = CARTESIAN_POINT('',(186.018495,-85.366589,1.585)); +#191328 = LINE('',#191329,#191330); +#191329 = CARTESIAN_POINT('',(186.014588,-85.320237,1.585)); +#191330 = VECTOR('',#191331,1.); +#191331 = DIRECTION('',(8.39919390277E-02,-0.996466434045,0.)); +#191332 = ORIENTED_EDGE('',*,*,#191333,.T.); +#191333 = EDGE_CURVE('',#191326,#191334,#191336,.T.); +#191334 = VERTEX_POINT('',#191335); +#191335 = CARTESIAN_POINT('',(186.626112,-84.943838,1.585)); +#191336 = LINE('',#191337,#191338); +#191337 = CARTESIAN_POINT('',(186.018495,-85.366589,1.585)); +#191338 = VECTOR('',#191339,1.); +#191339 = DIRECTION('',(0.820866622673,0.571119941677,0.)); +#191340 = ORIENTED_EDGE('',*,*,#191341,.T.); +#191341 = EDGE_CURVE('',#191334,#191342,#191344,.T.); +#191342 = VERTEX_POINT('',#191343); +#191343 = CARTESIAN_POINT('',(186.749849,-85.120605,1.585)); +#191344 = CIRCLE('',#191345,0.109999480258); +#191345 = AXIS2_PLACEMENT_3D('',#191346,#191347,#191348); +#191346 = CARTESIAN_POINT('',(186.67039979352,-85.04452800447,1.585)); +#191347 = DIRECTION('',(0.,0.,-1.)); +#191348 = DIRECTION('',(-0.402618207135,0.915368002108,0.)); +#191349 = ORIENTED_EDGE('',*,*,#191350,.T.); +#191350 = EDGE_CURVE('',#191342,#191351,#191353,.T.); +#191351 = VERTEX_POINT('',#191352); +#191352 = CARTESIAN_POINT('',(186.018495,-85.635133,1.585)); +#191353 = LINE('',#191354,#191355); +#191354 = CARTESIAN_POINT('',(186.749849,-85.120605,1.585)); +#191355 = VECTOR('',#191356,1.); +#191356 = DIRECTION('',(-0.817874055485,-0.575397279594,0.)); +#191357 = ORIENTED_EDGE('',*,*,#191358,.T.); +#191358 = EDGE_CURVE('',#191351,#191359,#191361,.T.); +#191359 = VERTEX_POINT('',#191360); +#191360 = CARTESIAN_POINT('',(186.018495,-85.848814,1.585)); +#191361 = LINE('',#191362,#191363); +#191362 = CARTESIAN_POINT('',(186.018495,-85.635133,1.585)); +#191363 = VECTOR('',#191364,1.); +#191364 = DIRECTION('',(0.,-1.,0.)); +#191365 = ORIENTED_EDGE('',*,*,#191366,.T.); +#191366 = EDGE_CURVE('',#191359,#191367,#191369,.T.); +#191367 = VERTEX_POINT('',#191368); +#191368 = CARTESIAN_POINT('',(186.69186,-85.850928,1.585)); +#191369 = LINE('',#191370,#191371); +#191370 = CARTESIAN_POINT('',(186.018495,-85.848814,1.585)); +#191371 = VECTOR('',#191372,1.); +#191372 = DIRECTION('',(0.999995071943,-3.139440841268E-03,0.)); +#191373 = ORIENTED_EDGE('',*,*,#191374,.T.); +#191374 = EDGE_CURVE('',#191367,#191375,#191377,.T.); +#191375 = VERTEX_POINT('',#191376); +#191376 = CARTESIAN_POINT('',(186.69186,-86.0667,1.585)); +#191377 = CIRCLE('',#191378,0.109999639072); +#191378 = AXIS2_PLACEMENT_3D('',#191379,#191380,#191381); +#191379 = CARTESIAN_POINT('',(186.6704,-85.958814,1.585)); +#191380 = DIRECTION('',(0.,0.,-1.)); +#191381 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#191382 = ORIENTED_EDGE('',*,*,#191383,.T.); +#191383 = EDGE_CURVE('',#191375,#191384,#191386,.T.); +#191384 = VERTEX_POINT('',#191385); +#191385 = CARTESIAN_POINT('',(185.04894,-86.0667,1.585)); +#191386 = LINE('',#191387,#191388); +#191387 = CARTESIAN_POINT('',(186.69186,-86.0667,1.585)); +#191388 = VECTOR('',#191389,1.); +#191389 = DIRECTION('',(-1.,0.,0.)); +#191390 = ORIENTED_EDGE('',*,*,#191391,.T.); +#191391 = EDGE_CURVE('',#191384,#191392,#191394,.T.); +#191392 = VERTEX_POINT('',#191393); +#191393 = CARTESIAN_POINT('',(184.962514,-85.980274,1.585)); +#191394 = CIRCLE('',#191395,0.109995194153); +#191395 = AXIS2_PLACEMENT_3D('',#191396,#191397,#191398); +#191396 = CARTESIAN_POINT('',(185.07039621987,-85.95881778012,1.585)); +#191397 = DIRECTION('',(0.,0.,-1.)); +#191398 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#191399 = ORIENTED_EDGE('',*,*,#191400,.T.); +#191400 = EDGE_CURVE('',#191392,#191401,#191403,.T.); +#191401 = VERTEX_POINT('',#191402); +#191402 = CARTESIAN_POINT('',(184.962514,-85.32783,1.585)); +#191403 = LINE('',#191404,#191405); +#191404 = CARTESIAN_POINT('',(184.962514,-85.980274,1.585)); +#191405 = VECTOR('',#191406,1.); +#191406 = DIRECTION('',(0.,1.,0.)); +#191407 = ORIENTED_EDGE('',*,*,#191408,.T.); +#191408 = EDGE_CURVE('',#191401,#191409,#191411,.T.); +#191409 = VERTEX_POINT('',#191410); +#191410 = CARTESIAN_POINT('',(184.972013,-85.300097,1.585)); +#191411 = LINE('',#191412,#191413); +#191412 = CARTESIAN_POINT('',(184.962514,-85.32783,1.585)); +#191413 = VECTOR('',#191414,1.); +#191414 = DIRECTION('',(0.324035635351,0.946044875797,0.)); +#191415 = ORIENTED_EDGE('',*,*,#191416,.T.); +#191416 = EDGE_CURVE('',#191409,#191417,#191419,.T.); +#191417 = VERTEX_POINT('',#191418); +#191418 = CARTESIAN_POINT('',(185.061884,-85.127564,1.585)); +#191419 = LINE('',#191420,#191421); +#191420 = CARTESIAN_POINT('',(184.972013,-85.300097,1.585)); +#191421 = VECTOR('',#191422,1.); +#191422 = DIRECTION('',(0.461975106506,0.886892891486,0.)); +#191423 = ORIENTED_EDGE('',*,*,#191424,.T.); +#191424 = EDGE_CURVE('',#191417,#191268,#191425,.T.); +#191425 = LINE('',#191426,#191427); +#191426 = CARTESIAN_POINT('',(185.061884,-85.127564,1.585)); +#191427 = VECTOR('',#191428,1.); +#191428 = DIRECTION('',(0.717700626173,0.696351786951,0.)); +#191429 = FACE_BOUND('',#191430,.F.); +#191430 = EDGE_LOOP('',(#191431,#191442,#191450,#191458,#191466,#191474, + #191482,#191490)); +#191431 = ORIENTED_EDGE('',*,*,#191432,.T.); +#191432 = EDGE_CURVE('',#191433,#191435,#191437,.T.); +#191433 = VERTEX_POINT('',#191434); +#191434 = CARTESIAN_POINT('',(185.690955,-85.211123,1.585)); +#191435 = VERTEX_POINT('',#191436); +#191436 = CARTESIAN_POINT('',(185.287938,-85.211123,1.585)); +#191437 = CIRCLE('',#191438,0.330157797413); +#191438 = AXIS2_PLACEMENT_3D('',#191439,#191440,#191441); +#191439 = CARTESIAN_POINT('',(185.4894465,-85.47265406052,1.585)); +#191440 = DIRECTION('',(0.,0.,1.)); +#191441 = DIRECTION('',(0.610339969491,0.792139584696,-0.)); +#191442 = ORIENTED_EDGE('',*,*,#191443,.T.); +#191443 = EDGE_CURVE('',#191435,#191444,#191446,.T.); +#191444 = VERTEX_POINT('',#191445); +#191445 = CARTESIAN_POINT('',(185.236993,-85.262068,1.585)); +#191446 = LINE('',#191447,#191448); +#191447 = CARTESIAN_POINT('',(185.287938,-85.211123,1.585)); +#191448 = VECTOR('',#191449,1.); +#191449 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#191450 = ORIENTED_EDGE('',*,*,#191451,.T.); +#191451 = EDGE_CURVE('',#191444,#191452,#191454,.T.); +#191452 = VERTEX_POINT('',#191453); +#191453 = CARTESIAN_POINT('',(185.1804,-85.375256,1.585)); +#191454 = LINE('',#191455,#191456); +#191455 = CARTESIAN_POINT('',(185.236993,-85.262068,1.585)); +#191456 = VECTOR('',#191457,1.); +#191457 = DIRECTION('',(-0.447207273756,-0.894430351844,0.)); +#191458 = ORIENTED_EDGE('',*,*,#191459,.T.); +#191459 = EDGE_CURVE('',#191452,#191460,#191462,.T.); +#191460 = VERTEX_POINT('',#191461); +#191461 = CARTESIAN_POINT('',(185.1804,-85.848814,1.585)); +#191462 = LINE('',#191463,#191464); +#191463 = CARTESIAN_POINT('',(185.1804,-85.375256,1.585)); +#191464 = VECTOR('',#191465,1.); +#191465 = DIRECTION('',(0.,-1.,0.)); +#191466 = ORIENTED_EDGE('',*,*,#191467,.T.); +#191467 = EDGE_CURVE('',#191460,#191468,#191470,.T.); +#191468 = VERTEX_POINT('',#191469); +#191469 = CARTESIAN_POINT('',(185.798495,-85.848814,1.585)); +#191470 = LINE('',#191471,#191472); +#191471 = CARTESIAN_POINT('',(185.1804,-85.848814,1.585)); +#191472 = VECTOR('',#191473,1.); +#191473 = DIRECTION('',(1.,0.,0.)); +#191474 = ORIENTED_EDGE('',*,*,#191475,.T.); +#191475 = EDGE_CURVE('',#191468,#191476,#191478,.T.); +#191476 = VERTEX_POINT('',#191477); +#191477 = CARTESIAN_POINT('',(185.798495,-85.375256,1.585)); +#191478 = LINE('',#191479,#191480); +#191479 = CARTESIAN_POINT('',(185.798495,-85.848814,1.585)); +#191480 = VECTOR('',#191481,1.); +#191481 = DIRECTION('',(0.,1.,0.)); +#191482 = ORIENTED_EDGE('',*,*,#191483,.T.); +#191483 = EDGE_CURVE('',#191476,#191484,#191486,.T.); +#191484 = VERTEX_POINT('',#191485); +#191485 = CARTESIAN_POINT('',(185.741901,-85.262069,1.585)); +#191486 = LINE('',#191487,#191488); +#191487 = CARTESIAN_POINT('',(185.798495,-85.375256,1.585)); +#191488 = VECTOR('',#191489,1.); +#191489 = DIRECTION('',(-0.447216756375,0.894425610556,0.)); +#191490 = ORIENTED_EDGE('',*,*,#191491,.T.); +#191491 = EDGE_CURVE('',#191484,#191433,#191492,.T.); +#191492 = LINE('',#191493,#191494); +#191493 = CARTESIAN_POINT('',(185.741901,-85.262069,1.585)); +#191494 = VECTOR('',#191495,1.); +#191495 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#191496 = PLANE('',#191497); +#191497 = AXIS2_PLACEMENT_3D('',#191498,#191499,#191500); +#191498 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191499 = DIRECTION('',(0.,0.,1.)); +#191500 = DIRECTION('',(1.,0.,-0.)); +#191501 = SHELL_BASED_SURFACE_MODEL('',(#191502)); +#191502 = OPEN_SHELL('',(#191503)); +#191503 = ADVANCED_FACE('',(#191504),#191540,.T.); +#191504 = FACE_BOUND('',#191505,.F.); +#191505 = EDGE_LOOP('',(#191506,#191517,#191525,#191534)); +#191506 = ORIENTED_EDGE('',*,*,#191507,.T.); +#191507 = EDGE_CURVE('',#191508,#191510,#191512,.T.); +#191508 = VERTEX_POINT('',#191509); +#191509 = CARTESIAN_POINT('',(169.642858,-85.460311,1.585)); +#191510 = VERTEX_POINT('',#191511); +#191511 = CARTESIAN_POINT('',(169.642858,-85.330311,1.585)); +#191512 = CIRCLE('',#191513,6.500000000092E-02); +#191513 = AXIS2_PLACEMENT_3D('',#191514,#191515,#191516); +#191514 = CARTESIAN_POINT('',(169.64285834486,-85.395311,1.585)); +#191515 = DIRECTION('',(0.,0.,-1.)); +#191516 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#191517 = ORIENTED_EDGE('',*,*,#191518,.T.); +#191518 = EDGE_CURVE('',#191510,#191519,#191521,.T.); +#191519 = VERTEX_POINT('',#191520); +#191520 = CARTESIAN_POINT('',(170.328572,-85.330311,1.585)); +#191521 = LINE('',#191522,#191523); +#191522 = CARTESIAN_POINT('',(169.642858,-85.330311,1.585)); +#191523 = VECTOR('',#191524,1.); +#191524 = DIRECTION('',(1.,0.,0.)); +#191525 = ORIENTED_EDGE('',*,*,#191526,.T.); +#191526 = EDGE_CURVE('',#191519,#191527,#191529,.T.); +#191527 = VERTEX_POINT('',#191528); +#191528 = CARTESIAN_POINT('',(170.328572,-85.460311,1.585)); +#191529 = CIRCLE('',#191530,6.500000000092E-02); +#191530 = AXIS2_PLACEMENT_3D('',#191531,#191532,#191533); +#191531 = CARTESIAN_POINT('',(170.32857165513,-85.395311,1.585)); +#191532 = DIRECTION('',(0.,0.,-1.)); +#191533 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#191534 = ORIENTED_EDGE('',*,*,#191535,.T.); +#191535 = EDGE_CURVE('',#191527,#191508,#191536,.T.); +#191536 = LINE('',#191537,#191538); +#191537 = CARTESIAN_POINT('',(170.328572,-85.460311,1.585)); +#191538 = VECTOR('',#191539,1.); +#191539 = DIRECTION('',(-1.,0.,0.)); +#191540 = PLANE('',#191541); +#191541 = AXIS2_PLACEMENT_3D('',#191542,#191543,#191544); +#191542 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191543 = DIRECTION('',(0.,0.,1.)); +#191544 = DIRECTION('',(1.,0.,-0.)); +#191545 = SHELL_BASED_SURFACE_MODEL('',(#191546)); +#191546 = OPEN_SHELL('',(#191547)); +#191547 = ADVANCED_FACE('',(#191548),#191592,.T.); +#191548 = FACE_BOUND('',#191549,.F.); +#191549 = EDGE_LOOP('',(#191550,#191561,#191569,#191578,#191586)); +#191550 = ORIENTED_EDGE('',*,*,#191551,.T.); +#191551 = EDGE_CURVE('',#191552,#191554,#191556,.T.); +#191552 = VERTEX_POINT('',#191553); +#191553 = CARTESIAN_POINT('',(151.056688,-84.66084,1.585)); +#191554 = VERTEX_POINT('',#191555); +#191555 = CARTESIAN_POINT('',(151.18174,-84.685714,1.585)); +#191556 = CIRCLE('',#191557,6.499988811647E-02); +#191557 = AXIS2_PLACEMENT_3D('',#191558,#191559,#191560); +#191558 = CARTESIAN_POINT('',(151.11674011188,-84.6857142701,1.585)); +#191559 = DIRECTION('',(0.,0.,-1.)); +#191560 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#191561 = ORIENTED_EDGE('',*,*,#191562,.T.); +#191562 = EDGE_CURVE('',#191554,#191563,#191565,.T.); +#191563 = VERTEX_POINT('',#191564); +#191564 = CARTESIAN_POINT('',(151.18174,-85.371428,1.585)); +#191565 = LINE('',#191566,#191567); +#191566 = CARTESIAN_POINT('',(151.18174,-84.685714,1.585)); +#191567 = VECTOR('',#191568,1.); +#191568 = DIRECTION('',(0.,-1.,0.)); +#191569 = ORIENTED_EDGE('',*,*,#191570,.T.); +#191570 = EDGE_CURVE('',#191563,#191571,#191573,.T.); +#191571 = VERTEX_POINT('',#191572); +#191572 = CARTESIAN_POINT('',(151.05174,-85.371428,1.585)); +#191573 = CIRCLE('',#191574,6.500000000091E-02); +#191574 = AXIS2_PLACEMENT_3D('',#191575,#191576,#191577); +#191575 = CARTESIAN_POINT('',(151.11674,-85.37142765513,1.585)); +#191576 = DIRECTION('',(-0.,0.,-1.)); +#191577 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#191578 = ORIENTED_EDGE('',*,*,#191579,.T.); +#191579 = EDGE_CURVE('',#191571,#191580,#191582,.T.); +#191580 = VERTEX_POINT('',#191581); +#191581 = CARTESIAN_POINT('',(151.05174,-84.685714,1.585)); +#191582 = LINE('',#191583,#191584); +#191583 = CARTESIAN_POINT('',(151.05174,-85.371428,1.585)); +#191584 = VECTOR('',#191585,1.); +#191585 = DIRECTION('',(0.,1.,0.)); +#191586 = ORIENTED_EDGE('',*,*,#191587,.T.); +#191587 = EDGE_CURVE('',#191580,#191552,#191588,.T.); +#191588 = LINE('',#191589,#191590); +#191589 = CARTESIAN_POINT('',(151.05174,-84.685714,1.585)); +#191590 = VECTOR('',#191591,1.); +#191591 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#191592 = PLANE('',#191593); +#191593 = AXIS2_PLACEMENT_3D('',#191594,#191595,#191596); +#191594 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191595 = DIRECTION('',(0.,0.,1.)); +#191596 = DIRECTION('',(1.,0.,-0.)); +#191597 = SHELL_BASED_SURFACE_MODEL('',(#191598)); +#191598 = OPEN_SHELL('',(#191599)); +#191599 = ADVANCED_FACE('',(#191600),#191814,.T.); +#191600 = FACE_BOUND('',#191601,.F.); +#191601 = EDGE_LOOP('',(#191602,#191613,#191621,#191629,#191637,#191645, + #191653,#191661,#191669,#191677,#191685,#191694,#191702,#191710, + #191718,#191726,#191734,#191742,#191750,#191759,#191767,#191775, + #191783,#191791,#191799,#191808)); +#191602 = ORIENTED_EDGE('',*,*,#191603,.T.); +#191603 = EDGE_CURVE('',#191604,#191606,#191608,.T.); +#191604 = VERTEX_POINT('',#191605); +#191605 = CARTESIAN_POINT('',(199.670714,-84.459597,1.585)); +#191606 = VERTEX_POINT('',#191607); +#191607 = CARTESIAN_POINT('',(199.735714,-84.394597,1.585)); +#191608 = CIRCLE('',#191609,6.500103935386E-02); +#191609 = AXIS2_PLACEMENT_3D('',#191610,#191611,#191612); +#191610 = CARTESIAN_POINT('',(199.73571503934,-84.45959803934,1.585)); +#191611 = DIRECTION('',(0.,0.,-1.)); +#191612 = DIRECTION('',(-0.999999999872,1.59896756177E-05,0.)); +#191613 = ORIENTED_EDGE('',*,*,#191614,.T.); +#191614 = EDGE_CURVE('',#191606,#191615,#191617,.T.); +#191615 = VERTEX_POINT('',#191616); +#191616 = CARTESIAN_POINT('',(199.913044,-84.396202,1.585)); +#191617 = LINE('',#191618,#191619); +#191618 = CARTESIAN_POINT('',(199.735714,-84.394597,1.585)); +#191619 = VECTOR('',#191620,1.); +#191620 = DIRECTION('',(0.999959042922,-9.050551310479E-03,0.)); +#191621 = ORIENTED_EDGE('',*,*,#191622,.T.); +#191622 = EDGE_CURVE('',#191615,#191623,#191625,.T.); +#191623 = VERTEX_POINT('',#191624); +#191624 = CARTESIAN_POINT('',(199.902882,-84.420736,1.585)); +#191625 = LINE('',#191626,#191627); +#191626 = CARTESIAN_POINT('',(199.913044,-84.396202,1.585)); +#191627 = VECTOR('',#191628,1.); +#191628 = DIRECTION('',(-0.382673290122,-0.923883733501,0.)); +#191629 = ORIENTED_EDGE('',*,*,#191630,.T.); +#191630 = EDGE_CURVE('',#191623,#191631,#191633,.T.); +#191631 = VERTEX_POINT('',#191632); +#191632 = CARTESIAN_POINT('',(199.902882,-84.479264,1.585)); +#191633 = LINE('',#191634,#191635); +#191634 = CARTESIAN_POINT('',(199.902882,-84.420736,1.585)); +#191635 = VECTOR('',#191636,1.); +#191636 = DIRECTION('',(0.,-1.,0.)); +#191637 = ORIENTED_EDGE('',*,*,#191638,.T.); +#191638 = EDGE_CURVE('',#191631,#191639,#191641,.T.); +#191639 = VERTEX_POINT('',#191640); +#191640 = CARTESIAN_POINT('',(199.92166,-84.524597,1.585)); +#191641 = LINE('',#191642,#191643); +#191642 = CARTESIAN_POINT('',(199.902882,-84.479264,1.585)); +#191643 = VECTOR('',#191644,1.); +#191644 = DIRECTION('',(0.382691374609,-0.923876242686,0.)); +#191645 = ORIENTED_EDGE('',*,*,#191646,.T.); +#191646 = EDGE_CURVE('',#191639,#191647,#191649,.T.); +#191647 = VERTEX_POINT('',#191648); +#191648 = CARTESIAN_POINT('',(199.800714,-84.524597,1.585)); +#191649 = LINE('',#191650,#191651); +#191650 = CARTESIAN_POINT('',(199.92166,-84.524597,1.585)); +#191651 = VECTOR('',#191652,1.); +#191652 = DIRECTION('',(-1.,0.,0.)); +#191653 = ORIENTED_EDGE('',*,*,#191654,.T.); +#191654 = EDGE_CURVE('',#191647,#191655,#191657,.T.); +#191655 = VERTEX_POINT('',#191656); +#191656 = CARTESIAN_POINT('',(199.800714,-85.294597,1.585)); +#191657 = LINE('',#191658,#191659); +#191658 = CARTESIAN_POINT('',(199.800714,-84.524597,1.585)); +#191659 = VECTOR('',#191660,1.); +#191660 = DIRECTION('',(0.,-1.,0.)); +#191661 = ORIENTED_EDGE('',*,*,#191662,.T.); +#191662 = EDGE_CURVE('',#191655,#191663,#191665,.T.); +#191663 = VERTEX_POINT('',#191664); +#191664 = CARTESIAN_POINT('',(199.939453,-85.294597,1.585)); +#191665 = LINE('',#191666,#191667); +#191666 = CARTESIAN_POINT('',(199.800714,-85.294597,1.585)); +#191667 = VECTOR('',#191668,1.); +#191668 = DIRECTION('',(1.,0.,0.)); +#191669 = ORIENTED_EDGE('',*,*,#191670,.T.); +#191670 = EDGE_CURVE('',#191663,#191671,#191673,.T.); +#191671 = VERTEX_POINT('',#191672); +#191672 = CARTESIAN_POINT('',(200.043458,-85.259928,1.585)); +#191673 = LINE('',#191674,#191675); +#191674 = CARTESIAN_POINT('',(199.939453,-85.294597,1.585)); +#191675 = VECTOR('',#191676,1.); +#191676 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#191677 = ORIENTED_EDGE('',*,*,#191678,.T.); +#191678 = EDGE_CURVE('',#191671,#191679,#191681,.T.); +#191679 = VERTEX_POINT('',#191680); +#191680 = CARTESIAN_POINT('',(200.110865,-85.192522,1.585)); +#191681 = LINE('',#191682,#191683); +#191682 = CARTESIAN_POINT('',(200.043458,-85.259928,1.585)); +#191683 = VECTOR('',#191684,1.); +#191684 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#191685 = ORIENTED_EDGE('',*,*,#191686,.T.); +#191686 = EDGE_CURVE('',#191679,#191687,#191689,.T.); +#191687 = VERTEX_POINT('',#191688); +#191688 = CARTESIAN_POINT('',(200.185,-84.853311,1.585)); +#191689 = CIRCLE('',#191690,0.553325470752); +#191690 = AXIS2_PLACEMENT_3D('',#191691,#191692,#191693); +#191691 = CARTESIAN_POINT('',(199.63466292366,-84.91074077444,1.585)); +#191692 = DIRECTION('',(0.,0.,1.)); +#191693 = DIRECTION('',(0.860618390997,-0.509250414902,0.)); +#191694 = ORIENTED_EDGE('',*,*,#191695,.T.); +#191695 = EDGE_CURVE('',#191687,#191696,#191698,.T.); +#191696 = VERTEX_POINT('',#191697); +#191697 = CARTESIAN_POINT('',(200.145814,-84.69657,1.585)); +#191698 = LINE('',#191699,#191700); +#191699 = CARTESIAN_POINT('',(200.185,-84.853311,1.585)); +#191700 = VECTOR('',#191701,1.); +#191701 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#191702 = ORIENTED_EDGE('',*,*,#191703,.T.); +#191703 = EDGE_CURVE('',#191696,#191704,#191706,.T.); +#191704 = VERTEX_POINT('',#191705); +#191705 = CARTESIAN_POINT('',(200.110864,-84.626669,1.585)); +#191706 = LINE('',#191707,#191708); +#191707 = CARTESIAN_POINT('',(200.145814,-84.69657,1.585)); +#191708 = VECTOR('',#191709,1.); +#191709 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#191710 = ORIENTED_EDGE('',*,*,#191711,.T.); +#191711 = EDGE_CURVE('',#191704,#191712,#191714,.T.); +#191712 = VERTEX_POINT('',#191713); +#191713 = CARTESIAN_POINT('',(200.080712,-84.596518,1.585)); +#191714 = LINE('',#191715,#191716); +#191715 = CARTESIAN_POINT('',(200.110864,-84.626669,1.585)); +#191716 = VECTOR('',#191717,1.); +#191717 = DIRECTION('',(-0.707118506986,0.707095055192,0.)); +#191718 = ORIENTED_EDGE('',*,*,#191719,.T.); +#191719 = EDGE_CURVE('',#191712,#191720,#191722,.T.); +#191720 = VERTEX_POINT('',#191721); +#191721 = CARTESIAN_POINT('',(200.133336,-84.57472,1.585)); +#191722 = LINE('',#191723,#191724); +#191723 = CARTESIAN_POINT('',(200.080712,-84.596518,1.585)); +#191724 = VECTOR('',#191725,1.); +#191725 = DIRECTION('',(0.923876891429,0.38268980844,0.)); +#191726 = ORIENTED_EDGE('',*,*,#191727,.T.); +#191727 = EDGE_CURVE('',#191720,#191728,#191730,.T.); +#191728 = VERTEX_POINT('',#191729); +#191729 = CARTESIAN_POINT('',(200.17472,-84.533336,1.585)); +#191730 = LINE('',#191731,#191732); +#191731 = CARTESIAN_POINT('',(200.133336,-84.57472,1.585)); +#191732 = VECTOR('',#191733,1.); +#191733 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#191734 = ORIENTED_EDGE('',*,*,#191735,.T.); +#191735 = EDGE_CURVE('',#191728,#191736,#191738,.T.); +#191736 = VERTEX_POINT('',#191737); +#191737 = CARTESIAN_POINT('',(200.181564,-84.516811,1.585)); +#191738 = LINE('',#191739,#191740); +#191739 = CARTESIAN_POINT('',(200.17472,-84.533336,1.585)); +#191740 = VECTOR('',#191741,1.); +#191741 = DIRECTION('',(0.382641479261,0.92389690894,0.)); +#191742 = ORIENTED_EDGE('',*,*,#191743,.T.); +#191743 = EDGE_CURVE('',#191736,#191744,#191746,.T.); +#191744 = VERTEX_POINT('',#191745); +#191745 = CARTESIAN_POINT('',(200.216037,-84.55087,1.585)); +#191746 = LINE('',#191747,#191748); +#191747 = CARTESIAN_POINT('',(200.181564,-84.516811,1.585)); +#191748 = VECTOR('',#191749,1.); +#191749 = DIRECTION('',(0.711365414616,-0.70282234376,0.)); +#191750 = ORIENTED_EDGE('',*,*,#191751,.T.); +#191751 = EDGE_CURVE('',#191744,#191752,#191754,.T.); +#191752 = VERTEX_POINT('',#191753); +#191753 = CARTESIAN_POINT('',(200.313059,-84.989647,1.585)); +#191754 = CIRCLE('',#191755,0.67543082859); +#191755 = AXIS2_PLACEMENT_3D('',#191756,#191757,#191758); +#191756 = CARTESIAN_POINT('',(199.64260778858,-84.90778139475,1.585)); +#191757 = DIRECTION('',(0.,0.,-1.)); +#191758 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#191759 = ORIENTED_EDGE('',*,*,#191760,.T.); +#191760 = EDGE_CURVE('',#191752,#191761,#191763,.T.); +#191761 = VERTEX_POINT('',#191762); +#191762 = CARTESIAN_POINT('',(200.265281,-85.17438,1.585)); +#191763 = LINE('',#191764,#191765); +#191764 = CARTESIAN_POINT('',(200.313059,-84.989647,1.585)); +#191765 = VECTOR('',#191766,1.); +#191766 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#191767 = ORIENTED_EDGE('',*,*,#191768,.T.); +#191768 = EDGE_CURVE('',#191761,#191769,#191771,.T.); +#191769 = VERTEX_POINT('',#191770); +#191770 = CARTESIAN_POINT('',(200.210248,-85.276987,1.585)); +#191771 = LINE('',#191772,#191773); +#191772 = CARTESIAN_POINT('',(200.265281,-85.17438,1.585)); +#191773 = VECTOR('',#191774,1.); +#191774 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#191775 = ORIENTED_EDGE('',*,*,#191776,.T.); +#191776 = EDGE_CURVE('',#191769,#191777,#191779,.T.); +#191777 = VERTEX_POINT('',#191778); +#191778 = CARTESIAN_POINT('',(200.112114,-85.370999,1.585)); +#191779 = LINE('',#191780,#191781); +#191780 = CARTESIAN_POINT('',(200.210248,-85.276987,1.585)); +#191781 = VECTOR('',#191782,1.); +#191782 = DIRECTION('',(-0.722109804107,-0.691778455007,0.)); +#191783 = ORIENTED_EDGE('',*,*,#191784,.T.); +#191784 = EDGE_CURVE('',#191777,#191785,#191787,.T.); +#191785 = VERTEX_POINT('',#191786); +#191786 = CARTESIAN_POINT('',(199.960222,-85.422563,1.585)); +#191787 = LINE('',#191788,#191789); +#191788 = CARTESIAN_POINT('',(200.112114,-85.370999,1.585)); +#191789 = VECTOR('',#191790,1.); +#191790 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#191791 = ORIENTED_EDGE('',*,*,#191792,.T.); +#191792 = EDGE_CURVE('',#191785,#191793,#191795,.T.); +#191793 = VERTEX_POINT('',#191794); +#191794 = CARTESIAN_POINT('',(199.735714,-85.424597,1.585)); +#191795 = LINE('',#191796,#191797); +#191796 = CARTESIAN_POINT('',(199.960222,-85.422563,1.585)); +#191797 = VECTOR('',#191798,1.); +#191798 = DIRECTION('',(-0.999958962441,-9.059438993769E-03,0.)); +#191799 = ORIENTED_EDGE('',*,*,#191800,.T.); +#191800 = EDGE_CURVE('',#191793,#191801,#191803,.T.); +#191801 = VERTEX_POINT('',#191802); +#191802 = CARTESIAN_POINT('',(199.670714,-85.359597,1.585)); +#191803 = CIRCLE('',#191804,6.500103935387E-02); +#191804 = AXIS2_PLACEMENT_3D('',#191805,#191806,#191807); +#191805 = CARTESIAN_POINT('',(199.73571503934,-85.35959596065,1.585)); +#191806 = DIRECTION('',(0.,0.,-1.)); +#191807 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#191808 = ORIENTED_EDGE('',*,*,#191809,.T.); +#191809 = EDGE_CURVE('',#191801,#191604,#191810,.T.); +#191810 = LINE('',#191811,#191812); +#191811 = CARTESIAN_POINT('',(199.670714,-85.359597,1.585)); +#191812 = VECTOR('',#191813,1.); +#191813 = DIRECTION('',(0.,1.,0.)); +#191814 = PLANE('',#191815); +#191815 = AXIS2_PLACEMENT_3D('',#191816,#191817,#191818); +#191816 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191817 = DIRECTION('',(0.,0.,1.)); +#191818 = DIRECTION('',(1.,0.,-0.)); +#191819 = SHELL_BASED_SURFACE_MODEL('',(#191820)); +#191820 = OPEN_SHELL('',(#191821)); +#191821 = ADVANCED_FACE('',(#191822),#191940,.T.); +#191822 = FACE_BOUND('',#191823,.F.); +#191823 = EDGE_LOOP('',(#191824,#191835,#191843,#191851,#191859,#191867, + #191875,#191883,#191892,#191900,#191909,#191917,#191925,#191934)); +#191824 = ORIENTED_EDGE('',*,*,#191825,.T.); +#191825 = EDGE_CURVE('',#191826,#191828,#191830,.T.); +#191826 = VERTEX_POINT('',#191827); +#191827 = CARTESIAN_POINT('',(198.727857,-84.459597,1.585)); +#191828 = VERTEX_POINT('',#191829); +#191829 = CARTESIAN_POINT('',(198.78466,-84.395116,1.585)); +#191830 = CIRCLE('',#191831,6.499996854972E-02); +#191831 = AXIS2_PLACEMENT_3D('',#191832,#191833,#191834); +#191832 = CARTESIAN_POINT('',(198.79285696855,-84.45959704851,1.585)); +#191833 = DIRECTION('',(0.,0.,-1.)); +#191834 = DIRECTION('',(-1.,7.464405904505E-07,0.)); +#191835 = ORIENTED_EDGE('',*,*,#191836,.T.); +#191836 = EDGE_CURVE('',#191828,#191837,#191839,.T.); +#191837 = VERTEX_POINT('',#191838); +#191838 = CARTESIAN_POINT('',(198.800899,-84.399545,1.585)); +#191839 = LINE('',#191840,#191841); +#191840 = CARTESIAN_POINT('',(198.78466,-84.395116,1.585)); +#191841 = VECTOR('',#191842,1.); +#191842 = DIRECTION('',(0.964761079179,-0.2631274598,0.)); +#191843 = ORIENTED_EDGE('',*,*,#191844,.T.); +#191844 = EDGE_CURVE('',#191837,#191845,#191847,.T.); +#191845 = VERTEX_POINT('',#191846); +#191846 = CARTESIAN_POINT('',(198.817731,-84.399545,1.585)); +#191847 = LINE('',#191848,#191849); +#191848 = CARTESIAN_POINT('',(198.800899,-84.399545,1.585)); +#191849 = VECTOR('',#191850,1.); +#191850 = DIRECTION('',(1.,0.,0.)); +#191851 = ORIENTED_EDGE('',*,*,#191852,.T.); +#191852 = EDGE_CURVE('',#191845,#191853,#191855,.T.); +#191853 = VERTEX_POINT('',#191854); +#191854 = CARTESIAN_POINT('',(198.832656,-84.408206,1.585)); +#191855 = LINE('',#191856,#191857); +#191856 = CARTESIAN_POINT('',(198.817731,-84.399545,1.585)); +#191857 = VECTOR('',#191858,1.); +#191858 = DIRECTION('',(0.86491798857,-0.501913212665,0.)); +#191859 = ORIENTED_EDGE('',*,*,#191860,.T.); +#191860 = EDGE_CURVE('',#191853,#191861,#191863,.T.); +#191861 = VERTEX_POINT('',#191862); +#191862 = CARTESIAN_POINT('',(198.849293,-84.427348,1.585)); +#191863 = LINE('',#191864,#191865); +#191864 = CARTESIAN_POINT('',(198.832656,-84.408206,1.585)); +#191865 = VECTOR('',#191866,1.); +#191866 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#191867 = ORIENTED_EDGE('',*,*,#191868,.T.); +#191868 = EDGE_CURVE('',#191861,#191869,#191871,.T.); +#191869 = VERTEX_POINT('',#191870); +#191870 = CARTESIAN_POINT('',(199.242143,-85.114835,1.585)); +#191871 = LINE('',#191872,#191873); +#191872 = CARTESIAN_POINT('',(198.849293,-84.427348,1.585)); +#191873 = VECTOR('',#191874,1.); +#191874 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#191875 = ORIENTED_EDGE('',*,*,#191876,.T.); +#191876 = EDGE_CURVE('',#191869,#191877,#191879,.T.); +#191877 = VERTEX_POINT('',#191878); +#191878 = CARTESIAN_POINT('',(199.242143,-84.459597,1.585)); +#191879 = LINE('',#191880,#191881); +#191880 = CARTESIAN_POINT('',(199.242143,-85.114835,1.585)); +#191881 = VECTOR('',#191882,1.); +#191882 = DIRECTION('',(0.,1.,0.)); +#191883 = ORIENTED_EDGE('',*,*,#191884,.T.); +#191884 = EDGE_CURVE('',#191877,#191885,#191887,.T.); +#191885 = VERTEX_POINT('',#191886); +#191886 = CARTESIAN_POINT('',(199.372143,-84.459597,1.585)); +#191887 = CIRCLE('',#191888,6.500000000092E-02); +#191888 = AXIS2_PLACEMENT_3D('',#191889,#191890,#191891); +#191889 = CARTESIAN_POINT('',(199.307143,-84.45959734486,1.585)); +#191890 = DIRECTION('',(0.,0.,-1.)); +#191891 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#191892 = ORIENTED_EDGE('',*,*,#191893,.T.); +#191893 = EDGE_CURVE('',#191885,#191894,#191896,.T.); +#191894 = VERTEX_POINT('',#191895); +#191895 = CARTESIAN_POINT('',(199.372143,-85.359597,1.585)); +#191896 = LINE('',#191897,#191898); +#191897 = CARTESIAN_POINT('',(199.372143,-84.459597,1.585)); +#191898 = VECTOR('',#191899,1.); +#191899 = DIRECTION('',(0.,-1.,0.)); +#191900 = ORIENTED_EDGE('',*,*,#191901,.T.); +#191901 = EDGE_CURVE('',#191894,#191902,#191904,.T.); +#191902 = VERTEX_POINT('',#191903); +#191903 = CARTESIAN_POINT('',(199.250707,-85.391846,1.585)); +#191904 = CIRCLE('',#191905,6.500021194141E-02); +#191905 = AXIS2_PLACEMENT_3D('',#191906,#191907,#191908); +#191906 = CARTESIAN_POINT('',(199.30714278806,-85.35959651351,1.585)); +#191907 = DIRECTION('',(-0.,0.,-1.)); +#191908 = DIRECTION('',(0.999999999972,-7.484331896833E-06,-0.)); +#191909 = ORIENTED_EDGE('',*,*,#191910,.T.); +#191910 = EDGE_CURVE('',#191902,#191911,#191913,.T.); +#191911 = VERTEX_POINT('',#191912); +#191912 = CARTESIAN_POINT('',(198.857857,-84.704358,1.585)); +#191913 = LINE('',#191914,#191915); +#191914 = CARTESIAN_POINT('',(199.250707,-85.391846,1.585)); +#191915 = VECTOR('',#191916,1.); +#191916 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#191917 = ORIENTED_EDGE('',*,*,#191918,.T.); +#191918 = EDGE_CURVE('',#191911,#191919,#191921,.T.); +#191919 = VERTEX_POINT('',#191920); +#191920 = CARTESIAN_POINT('',(198.857857,-85.359597,1.585)); +#191921 = LINE('',#191922,#191923); +#191922 = CARTESIAN_POINT('',(198.857857,-84.704358,1.585)); +#191923 = VECTOR('',#191924,1.); +#191924 = DIRECTION('',(0.,-1.,0.)); +#191925 = ORIENTED_EDGE('',*,*,#191926,.T.); +#191926 = EDGE_CURVE('',#191919,#191927,#191929,.T.); +#191927 = VERTEX_POINT('',#191928); +#191928 = CARTESIAN_POINT('',(198.727857,-85.359597,1.585)); +#191929 = CIRCLE('',#191930,6.500000000091E-02); +#191930 = AXIS2_PLACEMENT_3D('',#191931,#191932,#191933); +#191931 = CARTESIAN_POINT('',(198.792857,-85.35959665513,1.585)); +#191932 = DIRECTION('',(-0.,0.,-1.)); +#191933 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#191934 = ORIENTED_EDGE('',*,*,#191935,.T.); +#191935 = EDGE_CURVE('',#191927,#191826,#191936,.T.); +#191936 = LINE('',#191937,#191938); +#191937 = CARTESIAN_POINT('',(198.727857,-85.359597,1.585)); +#191938 = VECTOR('',#191939,1.); +#191939 = DIRECTION('',(0.,1.,0.)); +#191940 = PLANE('',#191941); +#191941 = AXIS2_PLACEMENT_3D('',#191942,#191943,#191944); +#191942 = CARTESIAN_POINT('',(0.,0.,1.585)); +#191943 = DIRECTION('',(0.,0.,1.)); +#191944 = DIRECTION('',(1.,0.,-0.)); +#191945 = SHELL_BASED_SURFACE_MODEL('',(#191946)); +#191946 = OPEN_SHELL('',(#191947)); +#191947 = ADVANCED_FACE('',(#191948),#192198,.T.); +#191948 = FACE_BOUND('',#191949,.F.); +#191949 = EDGE_LOOP('',(#191950,#191960,#191968,#191977,#191985,#191994, + #192002,#192010,#192018,#192026,#192035,#192043,#192051,#192059, + #192068,#192076,#192084,#192092,#192101,#192109,#192118,#192126, + #192134,#192142,#192150,#192159,#192167,#192176,#192184,#192192)); +#191950 = ORIENTED_EDGE('',*,*,#191951,.T.); +#191951 = EDGE_CURVE('',#191952,#191954,#191956,.T.); +#191952 = VERTEX_POINT('',#191953); +#191953 = CARTESIAN_POINT('',(197.987892,-84.44819,1.585)); +#191954 = VERTEX_POINT('',#191955); +#191955 = CARTESIAN_POINT('',(198.139777,-84.39663,1.585)); +#191956 = LINE('',#191957,#191958); +#191957 = CARTESIAN_POINT('',(197.987892,-84.44819,1.585)); +#191958 = VECTOR('',#191959,1.); +#191959 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#191960 = ORIENTED_EDGE('',*,*,#191961,.T.); +#191961 = EDGE_CURVE('',#191954,#191962,#191964,.T.); +#191962 = VERTEX_POINT('',#191963); +#191963 = CARTESIAN_POINT('',(198.281765,-84.395232,1.585)); +#191964 = LINE('',#191965,#191966); +#191965 = CARTESIAN_POINT('',(198.139777,-84.39663,1.585)); +#191966 = VECTOR('',#191967,1.); +#191967 = DIRECTION('',(0.999951532626,9.845425265658E-03,0.)); +#191968 = ORIENTED_EDGE('',*,*,#191969,.T.); +#191969 = EDGE_CURVE('',#191962,#191970,#191972,.T.); +#191970 = VERTEX_POINT('',#191971); +#191971 = CARTESIAN_POINT('',(198.41339,-84.459866,1.585)); +#191972 = CIRCLE('',#191973,0.276414597199); +#191973 = AXIS2_PLACEMENT_3D('',#191974,#191975,#191976); +#191974 = CARTESIAN_POINT('',(198.23010572554,-84.66677637741,1.585)); +#191975 = DIRECTION('',(0.,0.,-1.)); +#191976 = DIRECTION('',(0.186890544039,0.982380743169,0.)); +#191977 = ORIENTED_EDGE('',*,*,#191978,.T.); +#191978 = EDGE_CURVE('',#191970,#191979,#191981,.T.); +#191979 = VERTEX_POINT('',#191980); +#191980 = CARTESIAN_POINT('',(198.429122,-84.507062,1.585)); +#191981 = LINE('',#191982,#191983); +#191982 = CARTESIAN_POINT('',(198.41339,-84.459866,1.585)); +#191983 = VECTOR('',#191984,1.); +#191984 = DIRECTION('',(0.316227766017,-0.94868329805,0.)); +#191985 = ORIENTED_EDGE('',*,*,#191986,.T.); +#191986 = EDGE_CURVE('',#191979,#191987,#191989,.T.); +#191987 = VERTEX_POINT('',#191988); +#191988 = CARTESIAN_POINT('',(198.335217,-84.560592,1.585)); +#191989 = CIRCLE('',#191990,6.50002600426E-02); +#191990 = AXIS2_PLACEMENT_3D('',#191991,#191992,#191993); +#191991 = CARTESIAN_POINT('',(198.36428530559,-84.50245365279,1.585)); +#191992 = DIRECTION('',(0.,0.,-1.)); +#191993 = DIRECTION('',(0.997483615677,-7.089736565088E-02,0.)); +#191994 = ORIENTED_EDGE('',*,*,#191995,.T.); +#191995 = EDGE_CURVE('',#191987,#191996,#191998,.T.); +#191996 = VERTEX_POINT('',#191997); +#191997 = CARTESIAN_POINT('',(198.263227,-84.524597,1.585)); +#191998 = LINE('',#191999,#192000); +#191999 = CARTESIAN_POINT('',(198.335217,-84.560592,1.585)); +#192000 = VECTOR('',#192001,1.); +#192001 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#192002 = ORIENTED_EDGE('',*,*,#192003,.T.); +#192003 = EDGE_CURVE('',#191996,#192004,#192006,.T.); +#192004 = VERTEX_POINT('',#192005); +#192005 = CARTESIAN_POINT('',(198.160547,-84.524597,1.585)); +#192006 = LINE('',#192007,#192008); +#192007 = CARTESIAN_POINT('',(198.263227,-84.524597,1.585)); +#192008 = VECTOR('',#192009,1.); +#192009 = DIRECTION('',(-1.,0.,0.)); +#192010 = ORIENTED_EDGE('',*,*,#192011,.T.); +#192011 = EDGE_CURVE('',#192004,#192012,#192014,.T.); +#192012 = VERTEX_POINT('',#192013); +#192013 = CARTESIAN_POINT('',(198.056541,-84.559265,1.585)); +#192014 = LINE('',#192015,#192016); +#192015 = CARTESIAN_POINT('',(198.160547,-84.524597,1.585)); +#192016 = VECTOR('',#192017,1.); +#192017 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#192018 = ORIENTED_EDGE('',*,*,#192019,.T.); +#192019 = EDGE_CURVE('',#192012,#192020,#192022,.T.); +#192020 = VERTEX_POINT('',#192021); +#192021 = CARTESIAN_POINT('',(197.989134,-84.626671,1.585)); +#192022 = LINE('',#192023,#192024); +#192023 = CARTESIAN_POINT('',(198.056541,-84.559265,1.585)); +#192024 = VECTOR('',#192025,1.); +#192025 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#192026 = ORIENTED_EDGE('',*,*,#192027,.T.); +#192027 = EDGE_CURVE('',#192020,#192028,#192030,.T.); +#192028 = VERTEX_POINT('',#192029); +#192029 = CARTESIAN_POINT('',(197.915,-84.965881,1.585)); +#192030 = CIRCLE('',#192031,0.553307903116); +#192031 = AXIS2_PLACEMENT_3D('',#192032,#192033,#192034); +#192032 = CARTESIAN_POINT('',(198.46531893982,-84.90844668868,1.585)); +#192033 = DIRECTION('',(0.,0.,1.)); +#192034 = DIRECTION('',(-0.860614744786,0.509256576842,0.)); +#192035 = ORIENTED_EDGE('',*,*,#192036,.T.); +#192036 = EDGE_CURVE('',#192028,#192037,#192039,.T.); +#192037 = VERTEX_POINT('',#192038); +#192038 = CARTESIAN_POINT('',(197.954185,-85.122622,1.585)); +#192039 = LINE('',#192040,#192041); +#192040 = CARTESIAN_POINT('',(197.915,-84.965881,1.585)); +#192041 = VECTOR('',#192042,1.); +#192042 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#192043 = ORIENTED_EDGE('',*,*,#192044,.T.); +#192044 = EDGE_CURVE('',#192037,#192045,#192047,.T.); +#192045 = VERTEX_POINT('',#192046); +#192046 = CARTESIAN_POINT('',(197.989135,-85.192522,1.585)); +#192047 = LINE('',#192048,#192049); +#192048 = CARTESIAN_POINT('',(197.954185,-85.122622,1.585)); +#192049 = VECTOR('',#192050,1.); +#192050 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#192051 = ORIENTED_EDGE('',*,*,#192052,.T.); +#192052 = EDGE_CURVE('',#192045,#192053,#192055,.T.); +#192053 = VERTEX_POINT('',#192054); +#192054 = CARTESIAN_POINT('',(198.056541,-85.259928,1.585)); +#192055 = LINE('',#192056,#192057); +#192056 = CARTESIAN_POINT('',(197.989135,-85.192522,1.585)); +#192057 = VECTOR('',#192058,1.); +#192058 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#192059 = ORIENTED_EDGE('',*,*,#192060,.T.); +#192060 = EDGE_CURVE('',#192053,#192061,#192063,.T.); +#192061 = VERTEX_POINT('',#192062); +#192062 = CARTESIAN_POINT('',(198.329175,-85.259927,1.585)); +#192063 = CIRCLE('',#192064,0.272195913583); +#192064 = AXIS2_PLACEMENT_3D('',#192065,#192066,#192067); +#192065 = CARTESIAN_POINT('',(198.19285713583,-85.02432552445,1.585)); +#192066 = DIRECTION('',(0.,0.,1.)); +#192067 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#192068 = ORIENTED_EDGE('',*,*,#192069,.T.); +#192069 = EDGE_CURVE('',#192061,#192070,#192072,.T.); +#192070 = VERTEX_POINT('',#192071); +#192071 = CARTESIAN_POINT('',(198.342143,-85.246958,1.585)); +#192072 = LINE('',#192073,#192074); +#192073 = CARTESIAN_POINT('',(198.329175,-85.259927,1.585)); +#192074 = VECTOR('',#192075,1.); +#192075 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#192076 = ORIENTED_EDGE('',*,*,#192077,.T.); +#192077 = EDGE_CURVE('',#192070,#192078,#192080,.T.); +#192078 = VERTEX_POINT('',#192079); +#192079 = CARTESIAN_POINT('',(198.342143,-85.038882,1.585)); +#192080 = LINE('',#192081,#192082); +#192081 = CARTESIAN_POINT('',(198.342143,-85.246958,1.585)); +#192082 = VECTOR('',#192083,1.); +#192083 = DIRECTION('',(0.,1.,0.)); +#192084 = ORIENTED_EDGE('',*,*,#192085,.T.); +#192085 = EDGE_CURVE('',#192078,#192086,#192088,.T.); +#192086 = VERTEX_POINT('',#192087); +#192087 = CARTESIAN_POINT('',(198.235714,-85.038882,1.585)); +#192088 = LINE('',#192089,#192090); +#192089 = CARTESIAN_POINT('',(198.342143,-85.038882,1.585)); +#192090 = VECTOR('',#192091,1.); +#192091 = DIRECTION('',(-1.,0.,0.)); +#192092 = ORIENTED_EDGE('',*,*,#192093,.T.); +#192093 = EDGE_CURVE('',#192086,#192094,#192096,.T.); +#192094 = VERTEX_POINT('',#192095); +#192095 = CARTESIAN_POINT('',(198.235714,-84.908882,1.585)); +#192096 = CIRCLE('',#192097,6.500000000091E-02); +#192097 = AXIS2_PLACEMENT_3D('',#192098,#192099,#192100); +#192098 = CARTESIAN_POINT('',(198.23571434486,-84.973882,1.585)); +#192099 = DIRECTION('',(0.,0.,-1.)); +#192100 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#192101 = ORIENTED_EDGE('',*,*,#192102,.T.); +#192102 = EDGE_CURVE('',#192094,#192103,#192105,.T.); +#192103 = VERTEX_POINT('',#192104); +#192104 = CARTESIAN_POINT('',(198.407143,-84.908882,1.585)); +#192105 = LINE('',#192106,#192107); +#192106 = CARTESIAN_POINT('',(198.235714,-84.908882,1.585)); +#192107 = VECTOR('',#192108,1.); +#192108 = DIRECTION('',(1.,0.,0.)); +#192109 = ORIENTED_EDGE('',*,*,#192110,.T.); +#192110 = EDGE_CURVE('',#192103,#192111,#192113,.T.); +#192111 = VERTEX_POINT('',#192112); +#192112 = CARTESIAN_POINT('',(198.472143,-84.973882,1.585)); +#192113 = CIRCLE('',#192114,6.500103935387E-02); +#192114 = AXIS2_PLACEMENT_3D('',#192115,#192116,#192117); +#192115 = CARTESIAN_POINT('',(198.40714196065,-84.97388303934,1.585)); +#192116 = DIRECTION('',(0.,0.,-1.)); +#192117 = DIRECTION('',(1.598967605495E-05,0.999999999872,0.)); +#192118 = ORIENTED_EDGE('',*,*,#192119,.T.); +#192119 = EDGE_CURVE('',#192111,#192120,#192122,.T.); +#192120 = VERTEX_POINT('',#192121); +#192121 = CARTESIAN_POINT('',(198.472143,-85.273882,1.585)); +#192122 = LINE('',#192123,#192124); +#192123 = CARTESIAN_POINT('',(198.472143,-84.973882,1.585)); +#192124 = VECTOR('',#192125,1.); +#192125 = DIRECTION('',(0.,-1.,0.)); +#192126 = ORIENTED_EDGE('',*,*,#192127,.T.); +#192127 = EDGE_CURVE('',#192120,#192128,#192130,.T.); +#192128 = VERTEX_POINT('',#192129); +#192129 = CARTESIAN_POINT('',(198.467195,-85.298756,1.585)); +#192130 = LINE('',#192131,#192132); +#192131 = CARTESIAN_POINT('',(198.472143,-85.273882,1.585)); +#192132 = VECTOR('',#192133,1.); +#192133 = DIRECTION('',(-0.19509994748,-0.98078336573,0.)); +#192134 = ORIENTED_EDGE('',*,*,#192135,.T.); +#192135 = EDGE_CURVE('',#192128,#192136,#192138,.T.); +#192136 = VERTEX_POINT('',#192137); +#192137 = CARTESIAN_POINT('',(198.453106,-85.319843,1.585)); +#192138 = LINE('',#192139,#192140); +#192139 = CARTESIAN_POINT('',(198.467195,-85.298756,1.585)); +#192140 = VECTOR('',#192141,1.); +#192141 = DIRECTION('',(-0.55554616352,-0.831485694524,0.)); +#192142 = ORIENTED_EDGE('',*,*,#192143,.T.); +#192143 = EDGE_CURVE('',#192136,#192144,#192146,.T.); +#192144 = VERTEX_POINT('',#192145); +#192145 = CARTESIAN_POINT('',(198.397819,-85.371005,1.585)); +#192146 = LINE('',#192147,#192148); +#192147 = CARTESIAN_POINT('',(198.453106,-85.319843,1.585)); +#192148 = VECTOR('',#192149,1.); +#192149 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#192150 = ORIENTED_EDGE('',*,*,#192151,.T.); +#192151 = EDGE_CURVE('',#192144,#192152,#192154,.T.); +#192152 = VERTEX_POINT('',#192153); +#192153 = CARTESIAN_POINT('',(197.987885,-85.370999,1.585)); +#192154 = CIRCLE('',#192155,0.409311833232); +#192155 = AXIS2_PLACEMENT_3D('',#192156,#192157,#192158); +#192156 = CARTESIAN_POINT('',(198.19285718563,-85.01670734057,1.585)); +#192157 = DIRECTION('',(-0.,0.,-1.)); +#192158 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#192159 = ORIENTED_EDGE('',*,*,#192160,.T.); +#192160 = EDGE_CURVE('',#192152,#192161,#192163,.T.); +#192161 = VERTEX_POINT('',#192162); +#192162 = CARTESIAN_POINT('',(197.883962,-85.268322,1.585)); +#192163 = LINE('',#192164,#192165); +#192164 = CARTESIAN_POINT('',(197.987885,-85.370999,1.585)); +#192165 = VECTOR('',#192166,1.); +#192166 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#192167 = ORIENTED_EDGE('',*,*,#192168,.T.); +#192168 = EDGE_CURVE('',#192161,#192169,#192171,.T.); +#192169 = VERTEX_POINT('',#192170); +#192170 = CARTESIAN_POINT('',(197.786941,-84.829546,1.585)); +#192171 = CIRCLE('',#192172,0.675436077441); +#192172 = AXIS2_PLACEMENT_3D('',#192173,#192174,#192175); +#192173 = CARTESIAN_POINT('',(198.45739758405,-84.91141091072,1.585)); +#192174 = DIRECTION('',(0.,0.,-1.)); +#192175 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#192176 = ORIENTED_EDGE('',*,*,#192177,.T.); +#192177 = EDGE_CURVE('',#192169,#192178,#192180,.T.); +#192178 = VERTEX_POINT('',#192179); +#192179 = CARTESIAN_POINT('',(197.834719,-84.644813,1.585)); +#192180 = LINE('',#192181,#192182); +#192181 = CARTESIAN_POINT('',(197.786941,-84.829546,1.585)); +#192182 = VECTOR('',#192183,1.); +#192183 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#192184 = ORIENTED_EDGE('',*,*,#192185,.T.); +#192185 = EDGE_CURVE('',#192178,#192186,#192188,.T.); +#192186 = VERTEX_POINT('',#192187); +#192187 = CARTESIAN_POINT('',(197.889752,-84.542206,1.585)); +#192188 = LINE('',#192189,#192190); +#192189 = CARTESIAN_POINT('',(197.834719,-84.644813,1.585)); +#192190 = VECTOR('',#192191,1.); +#192191 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#192192 = ORIENTED_EDGE('',*,*,#192193,.T.); +#192193 = EDGE_CURVE('',#192186,#191952,#192194,.T.); +#192194 = LINE('',#192195,#192196); +#192195 = CARTESIAN_POINT('',(197.889752,-84.542206,1.585)); +#192196 = VECTOR('',#192197,1.); +#192197 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#192198 = PLANE('',#192199); +#192199 = AXIS2_PLACEMENT_3D('',#192200,#192201,#192202); +#192200 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192201 = DIRECTION('',(0.,0.,1.)); +#192202 = DIRECTION('',(1.,0.,-0.)); +#192203 = SHELL_BASED_SURFACE_MODEL('',(#192204)); +#192204 = OPEN_SHELL('',(#192205)); +#192205 = ADVANCED_FACE('',(#192206,#192332,#192399),#192451,.T.); +#192206 = FACE_BOUND('',#192207,.F.); +#192207 = EDGE_LOOP('',(#192208,#192219,#192227,#192235,#192243,#192251, + #192260,#192268,#192276,#192285,#192293,#192301,#192309,#192317, + #192326)); +#192208 = ORIENTED_EDGE('',*,*,#192209,.T.); +#192209 = EDGE_CURVE('',#192210,#192212,#192214,.T.); +#192210 = VERTEX_POINT('',#192211); +#192211 = CARTESIAN_POINT('',(172.277857,-84.409597,1.585)); +#192212 = VERTEX_POINT('',#192213); +#192213 = CARTESIAN_POINT('',(172.342857,-84.344597,1.585)); +#192214 = CIRCLE('',#192215,6.500103935387E-02); +#192215 = AXIS2_PLACEMENT_3D('',#192216,#192217,#192218); +#192216 = CARTESIAN_POINT('',(172.34285803934,-84.40959803934,1.585)); +#192217 = DIRECTION('',(0.,0.,-1.)); +#192218 = DIRECTION('',(-0.999999999872,1.59896756177E-05,0.)); +#192219 = ORIENTED_EDGE('',*,*,#192220,.T.); +#192220 = EDGE_CURVE('',#192212,#192221,#192223,.T.); +#192221 = VERTEX_POINT('',#192222); +#192222 = CARTESIAN_POINT('',(172.64605,-84.345232,1.585)); +#192223 = LINE('',#192224,#192225); +#192224 = CARTESIAN_POINT('',(172.342857,-84.344597,1.585)); +#192225 = VECTOR('',#192226,1.); +#192226 = DIRECTION('',(0.999997806803,-2.094370936408E-03,0.)); +#192227 = ORIENTED_EDGE('',*,*,#192228,.T.); +#192228 = EDGE_CURVE('',#192221,#192229,#192231,.T.); +#192229 = VERTEX_POINT('',#192230); +#192230 = CARTESIAN_POINT('',(172.671926,-84.351459,1.585)); +#192231 = LINE('',#192232,#192233); +#192232 = CARTESIAN_POINT('',(172.64605,-84.345232,1.585)); +#192233 = VECTOR('',#192234,1.); +#192234 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#192235 = ORIENTED_EDGE('',*,*,#192236,.T.); +#192236 = EDGE_CURVE('',#192229,#192237,#192239,.T.); +#192237 = VERTEX_POINT('',#192238); +#192238 = CARTESIAN_POINT('',(172.774534,-84.406492,1.585)); +#192239 = LINE('',#192240,#192241); +#192240 = CARTESIAN_POINT('',(172.671926,-84.351459,1.585)); +#192241 = VECTOR('',#192242,1.); +#192242 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#192243 = ORIENTED_EDGE('',*,*,#192244,.T.); +#192244 = EDGE_CURVE('',#192237,#192245,#192247,.T.); +#192245 = VERTEX_POINT('',#192246); +#192246 = CARTESIAN_POINT('',(172.829567,-84.466242,1.585)); +#192247 = LINE('',#192248,#192249); +#192248 = CARTESIAN_POINT('',(172.774534,-84.406492,1.585)); +#192249 = VECTOR('',#192250,1.); +#192250 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#192251 = ORIENTED_EDGE('',*,*,#192252,.T.); +#192252 = EDGE_CURVE('',#192245,#192253,#192255,.T.); +#192253 = VERTEX_POINT('',#192254); +#192254 = CARTESIAN_POINT('',(172.82318,-84.789751,1.585)); +#192255 = CIRCLE('',#192256,0.260195634991); +#192256 = AXIS2_PLACEMENT_3D('',#192257,#192258,#192259); +#192257 = CARTESIAN_POINT('',(172.6226313306,-84.62397404239,1.585)); +#192258 = DIRECTION('',(0.,0.,-1.)); +#192259 = DIRECTION('',(0.795307997401,0.606205566842,0.)); +#192260 = ORIENTED_EDGE('',*,*,#192261,.T.); +#192261 = EDGE_CURVE('',#192253,#192262,#192264,.T.); +#192262 = VERTEX_POINT('',#192263); +#192263 = CARTESIAN_POINT('',(172.796304,-84.820973,1.585)); +#192264 = LINE('',#192265,#192266); +#192265 = CARTESIAN_POINT('',(172.82318,-84.789751,1.585)); +#192266 = VECTOR('',#192267,1.); +#192267 = DIRECTION('',(-0.652389160843,-0.757884148676,0.)); +#192268 = ORIENTED_EDGE('',*,*,#192269,.T.); +#192269 = EDGE_CURVE('',#192262,#192270,#192272,.T.); +#192270 = VERTEX_POINT('',#192271); +#192271 = CARTESIAN_POINT('',(172.817391,-84.835063,1.585)); +#192272 = LINE('',#192273,#192274); +#192273 = CARTESIAN_POINT('',(172.796304,-84.820973,1.585)); +#192274 = VECTOR('',#192275,1.); +#192275 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#192276 = ORIENTED_EDGE('',*,*,#192277,.T.); +#192277 = EDGE_CURVE('',#192270,#192278,#192280,.T.); +#192278 = VERTEX_POINT('',#192279); +#192279 = CARTESIAN_POINT('',(172.919227,-85.152824,1.585)); +#192280 = CIRCLE('',#192281,0.311668456373); +#192281 = AXIS2_PLACEMENT_3D('',#192282,#192283,#192284); +#192282 = CARTESIAN_POINT('',(172.61761646242,-85.07428540872,1.585)); +#192283 = DIRECTION('',(0.,0.,-1.)); +#192284 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#192285 = ORIENTED_EDGE('',*,*,#192286,.T.); +#192286 = EDGE_CURVE('',#192278,#192287,#192289,.T.); +#192287 = VERTEX_POINT('',#192288); +#192288 = CARTESIAN_POINT('',(172.866036,-85.26118,1.585)); +#192289 = LINE('',#192290,#192291); +#192290 = CARTESIAN_POINT('',(172.919227,-85.152824,1.585)); +#192291 = VECTOR('',#192292,1.); +#192292 = DIRECTION('',(-0.440660203323,-0.897673986037,0.)); +#192293 = ORIENTED_EDGE('',*,*,#192294,.T.); +#192294 = EDGE_CURVE('',#192287,#192295,#192297,.T.); +#192295 = VERTEX_POINT('',#192296); +#192296 = CARTESIAN_POINT('',(172.808736,-85.318484,1.585)); +#192297 = LINE('',#192298,#192299); +#192298 = CARTESIAN_POINT('',(172.866036,-85.26118,1.585)); +#192299 = VECTOR('',#192300,1.); +#192300 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#192301 = ORIENTED_EDGE('',*,*,#192302,.T.); +#192302 = EDGE_CURVE('',#192295,#192303,#192305,.T.); +#192303 = VERTEX_POINT('',#192304); +#192304 = CARTESIAN_POINT('',(172.70037,-85.371681,1.585)); +#192305 = LINE('',#192306,#192307); +#192306 = CARTESIAN_POINT('',(172.808736,-85.318484,1.585)); +#192307 = VECTOR('',#192308,1.); +#192308 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#192309 = ORIENTED_EDGE('',*,*,#192310,.T.); +#192310 = EDGE_CURVE('',#192303,#192311,#192313,.T.); +#192311 = VERTEX_POINT('',#192312); +#192312 = CARTESIAN_POINT('',(172.342857,-85.374597,1.585)); +#192313 = LINE('',#192314,#192315); +#192314 = CARTESIAN_POINT('',(172.70037,-85.371681,1.585)); +#192315 = VECTOR('',#192316,1.); +#192316 = DIRECTION('',(-0.999966738663,-8.156075471217E-03,0.)); +#192317 = ORIENTED_EDGE('',*,*,#192318,.T.); +#192318 = EDGE_CURVE('',#192311,#192319,#192321,.T.); +#192319 = VERTEX_POINT('',#192320); +#192320 = CARTESIAN_POINT('',(172.277857,-85.309597,1.585)); +#192321 = CIRCLE('',#192322,6.500103935387E-02); +#192322 = AXIS2_PLACEMENT_3D('',#192323,#192324,#192325); +#192323 = CARTESIAN_POINT('',(172.34285803934,-85.30959596065,1.585)); +#192324 = DIRECTION('',(0.,0.,-1.)); +#192325 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#192326 = ORIENTED_EDGE('',*,*,#192327,.T.); +#192327 = EDGE_CURVE('',#192319,#192210,#192328,.T.); +#192328 = LINE('',#192329,#192330); +#192329 = CARTESIAN_POINT('',(172.277857,-85.309597,1.585)); +#192330 = VECTOR('',#192331,1.); +#192331 = DIRECTION('',(0.,1.,0.)); +#192332 = FACE_BOUND('',#192333,.F.); +#192333 = EDGE_LOOP('',(#192334,#192344,#192352,#192360,#192368,#192377, + #192385,#192393)); +#192334 = ORIENTED_EDGE('',*,*,#192335,.T.); +#192335 = EDGE_CURVE('',#192336,#192338,#192340,.T.); +#192336 = VERTEX_POINT('',#192337); +#192337 = CARTESIAN_POINT('',(172.736317,-84.937837,1.585)); +#192338 = VERTEX_POINT('',#192339); +#192339 = CARTESIAN_POINT('',(172.63231,-84.903168,1.585)); +#192340 = LINE('',#192341,#192342); +#192341 = CARTESIAN_POINT('',(172.736317,-84.937837,1.585)); +#192342 = VECTOR('',#192343,1.); +#192343 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#192344 = ORIENTED_EDGE('',*,*,#192345,.T.); +#192345 = EDGE_CURVE('',#192338,#192346,#192348,.T.); +#192346 = VERTEX_POINT('',#192347); +#192347 = CARTESIAN_POINT('',(172.407857,-84.903168,1.585)); +#192348 = LINE('',#192349,#192350); +#192349 = CARTESIAN_POINT('',(172.63231,-84.903168,1.585)); +#192350 = VECTOR('',#192351,1.); +#192351 = DIRECTION('',(-1.,0.,0.)); +#192352 = ORIENTED_EDGE('',*,*,#192353,.T.); +#192353 = EDGE_CURVE('',#192346,#192354,#192356,.T.); +#192354 = VERTEX_POINT('',#192355); +#192355 = CARTESIAN_POINT('',(172.407857,-85.244597,1.585)); +#192356 = LINE('',#192357,#192358); +#192357 = CARTESIAN_POINT('',(172.407857,-84.903168,1.585)); +#192358 = VECTOR('',#192359,1.); +#192359 = DIRECTION('',(0.,-1.,0.)); +#192360 = ORIENTED_EDGE('',*,*,#192361,.T.); +#192361 = EDGE_CURVE('',#192354,#192362,#192364,.T.); +#192362 = VERTEX_POINT('',#192363); +#192363 = CARTESIAN_POINT('',(172.670369,-85.244597,1.585)); +#192364 = LINE('',#192365,#192366); +#192365 = CARTESIAN_POINT('',(172.407857,-85.244597,1.585)); +#192366 = VECTOR('',#192367,1.); +#192367 = DIRECTION('',(1.,0.,0.)); +#192368 = ORIENTED_EDGE('',*,*,#192369,.T.); +#192369 = EDGE_CURVE('',#192362,#192370,#192372,.T.); +#192370 = VERTEX_POINT('',#192371); +#192371 = CARTESIAN_POINT('',(172.792143,-85.122823,1.585)); +#192372 = CIRCLE('',#192373,0.170996196456); +#192373 = AXIS2_PLACEMENT_3D('',#192374,#192375,#192376); +#192374 = CARTESIAN_POINT('',(172.6267925,-85.0792465,1.585)); +#192375 = DIRECTION('',(0.,0.,1.)); +#192376 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#192377 = ORIENTED_EDGE('',*,*,#192378,.T.); +#192378 = EDGE_CURVE('',#192370,#192379,#192381,.T.); +#192379 = VERTEX_POINT('',#192380); +#192380 = CARTESIAN_POINT('',(172.792143,-85.024941,1.585)); +#192381 = LINE('',#192382,#192383); +#192382 = CARTESIAN_POINT('',(172.792143,-85.122823,1.585)); +#192383 = VECTOR('',#192384,1.); +#192384 = DIRECTION('',(0.,1.,0.)); +#192385 = ORIENTED_EDGE('',*,*,#192386,.T.); +#192386 = EDGE_CURVE('',#192379,#192387,#192389,.T.); +#192387 = VERTEX_POINT('',#192388); +#192388 = CARTESIAN_POINT('',(172.760864,-84.962384,1.585)); +#192389 = LINE('',#192390,#192391); +#192390 = CARTESIAN_POINT('',(172.792143,-85.024941,1.585)); +#192391 = VECTOR('',#192392,1.); +#192392 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#192393 = ORIENTED_EDGE('',*,*,#192394,.T.); +#192394 = EDGE_CURVE('',#192387,#192336,#192395,.T.); +#192395 = LINE('',#192396,#192397); +#192396 = CARTESIAN_POINT('',(172.760864,-84.962384,1.585)); +#192397 = VECTOR('',#192398,1.); +#192398 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#192399 = FACE_BOUND('',#192400,.F.); +#192400 = EDGE_LOOP('',(#192401,#192412,#192420,#192428,#192436,#192445) + ); +#192401 = ORIENTED_EDGE('',*,*,#192402,.T.); +#192402 = EDGE_CURVE('',#192403,#192405,#192407,.T.); +#192403 = VERTEX_POINT('',#192404); +#192404 = CARTESIAN_POINT('',(172.749286,-84.59637,1.585)); +#192405 = VERTEX_POINT('',#192406); +#192406 = CARTESIAN_POINT('',(172.627512,-84.474597,1.585)); +#192407 = CIRCLE('',#192408,0.170996278941); +#192408 = AXIS2_PLACEMENT_3D('',#192409,#192410,#192411); +#192409 = CARTESIAN_POINT('',(172.5839357157,-84.63994764214,1.585)); +#192410 = DIRECTION('',(0.,0.,1.)); +#192411 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#192412 = ORIENTED_EDGE('',*,*,#192413,.T.); +#192413 = EDGE_CURVE('',#192405,#192414,#192416,.T.); +#192414 = VERTEX_POINT('',#192415); +#192415 = CARTESIAN_POINT('',(172.407857,-84.474597,1.585)); +#192416 = LINE('',#192417,#192418); +#192417 = CARTESIAN_POINT('',(172.627512,-84.474597,1.585)); +#192418 = VECTOR('',#192419,1.); +#192419 = DIRECTION('',(-1.,0.,0.)); +#192420 = ORIENTED_EDGE('',*,*,#192421,.T.); +#192421 = EDGE_CURVE('',#192414,#192422,#192424,.T.); +#192422 = VERTEX_POINT('',#192423); +#192423 = CARTESIAN_POINT('',(172.407857,-84.773168,1.585)); +#192424 = LINE('',#192425,#192426); +#192425 = CARTESIAN_POINT('',(172.407857,-84.474597,1.585)); +#192426 = VECTOR('',#192427,1.); +#192427 = DIRECTION('',(0.,-1.,0.)); +#192428 = ORIENTED_EDGE('',*,*,#192429,.T.); +#192429 = EDGE_CURVE('',#192422,#192430,#192432,.T.); +#192430 = VERTEX_POINT('',#192431); +#192431 = CARTESIAN_POINT('',(172.627512,-84.773168,1.585)); +#192432 = LINE('',#192433,#192434); +#192433 = CARTESIAN_POINT('',(172.407857,-84.773168,1.585)); +#192434 = VECTOR('',#192435,1.); +#192435 = DIRECTION('',(1.,0.,0.)); +#192436 = ORIENTED_EDGE('',*,*,#192437,.T.); +#192437 = EDGE_CURVE('',#192430,#192438,#192440,.T.); +#192438 = VERTEX_POINT('',#192439); +#192439 = CARTESIAN_POINT('',(172.749286,-84.651395,1.585)); +#192440 = CIRCLE('',#192441,0.171001125777); +#192441 = AXIS2_PLACEMENT_3D('',#192442,#192443,#192444); +#192442 = CARTESIAN_POINT('',(172.58393174885,-84.60781339097,1.585)); +#192443 = DIRECTION('',(0.,0.,1.)); +#192444 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#192445 = ORIENTED_EDGE('',*,*,#192446,.T.); +#192446 = EDGE_CURVE('',#192438,#192403,#192447,.T.); +#192447 = LINE('',#192448,#192449); +#192448 = CARTESIAN_POINT('',(172.749286,-84.651395,1.585)); +#192449 = VECTOR('',#192450,1.); +#192450 = DIRECTION('',(0.,1.,0.)); +#192451 = PLANE('',#192452); +#192452 = AXIS2_PLACEMENT_3D('',#192453,#192454,#192455); +#192453 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192454 = DIRECTION('',(0.,0.,1.)); +#192455 = DIRECTION('',(1.,0.,-0.)); +#192456 = SHELL_BASED_SURFACE_MODEL('',(#192457)); +#192457 = OPEN_SHELL('',(#192458)); +#192458 = ADVANCED_FACE('',(#192459),#192520,.T.); +#192459 = FACE_BOUND('',#192460,.F.); +#192460 = EDGE_LOOP('',(#192461,#192472,#192480,#192489,#192497,#192506, + #192514)); +#192461 = ORIENTED_EDGE('',*,*,#192462,.T.); +#192462 = EDGE_CURVE('',#192463,#192465,#192467,.T.); +#192463 = VERTEX_POINT('',#192464); +#192464 = CARTESIAN_POINT('',(169.495478,-84.389042,1.585)); +#192465 = VERTEX_POINT('',#192466); +#192466 = CARTESIAN_POINT('',(169.618807,-84.430152,1.585)); +#192467 = CIRCLE('',#192468,6.500014296398E-02); +#192468 = AXIS2_PLACEMENT_3D('',#192469,#192470,#192471); +#192469 = CARTESIAN_POINT('',(169.55714240669,-84.40959727991,1.585)); +#192470 = DIRECTION('',(0.,0.,-1.)); +#192471 = DIRECTION('',(-0.948681093355,0.316234380027,0.)); +#192472 = ORIENTED_EDGE('',*,*,#192473,.T.); +#192473 = EDGE_CURVE('',#192465,#192474,#192476,.T.); +#192474 = VERTEX_POINT('',#192475); +#192475 = CARTESIAN_POINT('',(169.318807,-85.330152,1.585)); +#192476 = LINE('',#192477,#192478); +#192477 = CARTESIAN_POINT('',(169.618807,-84.430152,1.585)); +#192478 = VECTOR('',#192479,1.); +#192479 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#192480 = ORIENTED_EDGE('',*,*,#192481,.T.); +#192481 = EDGE_CURVE('',#192474,#192482,#192484,.T.); +#192482 = VERTEX_POINT('',#192483); +#192483 = CARTESIAN_POINT('',(169.195478,-85.330152,1.585)); +#192484 = CIRCLE('',#192485,6.500043802859E-02); +#192485 = AXIS2_PLACEMENT_3D('',#192486,#192487,#192488); +#192486 = CARTESIAN_POINT('',(169.2571425,-85.30959606694,1.585)); +#192487 = DIRECTION('',(-0.,0.,-1.)); +#192488 = DIRECTION('',(0.948678222336,-0.316242992755,-0.)); +#192489 = ORIENTED_EDGE('',*,*,#192490,.T.); +#192490 = EDGE_CURVE('',#192482,#192491,#192493,.T.); +#192491 = VERTEX_POINT('',#192492); +#192492 = CARTESIAN_POINT('',(168.895479,-84.430152,1.585)); +#192493 = LINE('',#192494,#192495); +#192494 = CARTESIAN_POINT('',(169.195478,-85.330152,1.585)); +#192495 = VECTOR('',#192496,1.); +#192496 = DIRECTION('',(-0.316226817333,0.948683614278,0.)); +#192497 = ORIENTED_EDGE('',*,*,#192498,.T.); +#192498 = EDGE_CURVE('',#192491,#192499,#192501,.T.); +#192499 = VERTEX_POINT('',#192500); +#192500 = CARTESIAN_POINT('',(169.018807,-84.389042,1.585)); +#192501 = CIRCLE('',#192502,6.499966862238E-02); +#192502 = AXIS2_PLACEMENT_3D('',#192503,#192504,#192505); +#192503 = CARTESIAN_POINT('',(168.95714304307,-84.40959712923,1.585)); +#192504 = DIRECTION('',(0.,0.,-1.)); +#192505 = DIRECTION('',(-0.948682422317,-0.316230393205,-0.)); +#192506 = ORIENTED_EDGE('',*,*,#192507,.T.); +#192507 = EDGE_CURVE('',#192499,#192508,#192510,.T.); +#192508 = VERTEX_POINT('',#192509); +#192509 = CARTESIAN_POINT('',(169.257142,-85.104049,1.585)); +#192510 = LINE('',#192511,#192512); +#192511 = CARTESIAN_POINT('',(169.018807,-84.389042,1.585)); +#192512 = VECTOR('',#192513,1.); +#192513 = DIRECTION('',(0.316226969926,-0.948683563414,0.)); +#192514 = ORIENTED_EDGE('',*,*,#192515,.T.); +#192515 = EDGE_CURVE('',#192508,#192463,#192516,.T.); +#192516 = LINE('',#192517,#192518); +#192517 = CARTESIAN_POINT('',(169.257142,-85.104049,1.585)); +#192518 = VECTOR('',#192519,1.); +#192519 = DIRECTION('',(0.316228164062,0.948683165369,0.)); +#192520 = PLANE('',#192521); +#192521 = AXIS2_PLACEMENT_3D('',#192522,#192523,#192524); +#192522 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192523 = DIRECTION('',(0.,0.,1.)); +#192524 = DIRECTION('',(1.,0.,-0.)); +#192525 = SHELL_BASED_SURFACE_MODEL('',(#192526)); +#192526 = OPEN_SHELL('',(#192527)); +#192527 = ADVANCED_FACE('',(#192528),#192792,.T.); +#192528 = FACE_BOUND('',#192529,.F.); +#192529 = EDGE_LOOP('',(#192530,#192540,#192548,#192556,#192565,#192573, + #192581,#192590,#192598,#192606,#192614,#192622,#192630,#192638, + #192646,#192655,#192663,#192671,#192679,#192687,#192696,#192704, + #192712,#192721,#192729,#192737,#192745,#192753,#192761,#192769, + #192777,#192786)); +#192530 = ORIENTED_EDGE('',*,*,#192531,.T.); +#192531 = EDGE_CURVE('',#192532,#192534,#192536,.T.); +#192532 = VERTEX_POINT('',#192533); +#192533 = CARTESIAN_POINT('',(171.491273,-84.400702,1.585)); +#192534 = VERTEX_POINT('',#192535); +#192535 = CARTESIAN_POINT('',(171.599629,-84.347512,1.585)); +#192536 = LINE('',#192537,#192538); +#192537 = CARTESIAN_POINT('',(171.491273,-84.400702,1.585)); +#192538 = VECTOR('',#192539,1.); +#192539 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#192540 = ORIENTED_EDGE('',*,*,#192541,.T.); +#192541 = EDGE_CURVE('',#192534,#192542,#192544,.T.); +#192542 = VERTEX_POINT('',#192543); +#192543 = CARTESIAN_POINT('',(171.838793,-84.34663,1.585)); +#192544 = LINE('',#192545,#192546); +#192545 = CARTESIAN_POINT('',(171.599629,-84.347512,1.585)); +#192546 = VECTOR('',#192547,1.); +#192547 = DIRECTION('',(0.999993199965,3.687820919367E-03,0.)); +#192548 = ORIENTED_EDGE('',*,*,#192549,.T.); +#192549 = EDGE_CURVE('',#192542,#192550,#192552,.T.); +#192550 = VERTEX_POINT('',#192551); +#192551 = CARTESIAN_POINT('',(171.977698,-84.39079,1.585)); +#192552 = LINE('',#192553,#192554); +#192553 = CARTESIAN_POINT('',(171.838793,-84.34663,1.585)); +#192554 = VECTOR('',#192555,1.); +#192555 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#192556 = ORIENTED_EDGE('',*,*,#192557,.T.); +#192557 = EDGE_CURVE('',#192550,#192558,#192560,.T.); +#192558 = VERTEX_POINT('',#192559); +#192559 = CARTESIAN_POINT('',(171.936589,-84.514119,1.585)); +#192560 = CIRCLE('',#192561,6.499998485858E-02); +#192561 = AXIS2_PLACEMENT_3D('',#192562,#192563,#192564); +#192562 = CARTESIAN_POINT('',(171.95714249751,-84.45245416584,1.585)); +#192563 = DIRECTION('',(0.,0.,-1.)); +#192564 = DIRECTION('',(0.316238573437,0.948679695509,0.)); +#192565 = ORIENTED_EDGE('',*,*,#192566,.T.); +#192566 = EDGE_CURVE('',#192558,#192567,#192569,.T.); +#192567 = VERTEX_POINT('',#192568); +#192568 = CARTESIAN_POINT('',(171.818024,-84.474597,1.585)); +#192569 = LINE('',#192570,#192571); +#192570 = CARTESIAN_POINT('',(171.936589,-84.514119,1.585)); +#192571 = VECTOR('',#192572,1.); +#192572 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#192573 = ORIENTED_EDGE('',*,*,#192574,.T.); +#192574 = EDGE_CURVE('',#192567,#192575,#192577,.T.); +#192575 = VERTEX_POINT('',#192576); +#192576 = CARTESIAN_POINT('',(171.629631,-84.474597,1.585)); +#192577 = LINE('',#192578,#192579); +#192578 = CARTESIAN_POINT('',(171.818024,-84.474597,1.585)); +#192579 = VECTOR('',#192580,1.); +#192580 = DIRECTION('',(-1.,0.,0.)); +#192581 = ORIENTED_EDGE('',*,*,#192582,.T.); +#192582 = EDGE_CURVE('',#192575,#192583,#192585,.T.); +#192583 = VERTEX_POINT('',#192584); +#192584 = CARTESIAN_POINT('',(171.507857,-84.59637,1.585)); +#192585 = CIRCLE('',#192586,0.170991742693); +#192586 = AXIS2_PLACEMENT_3D('',#192587,#192588,#192589); +#192587 = CARTESIAN_POINT('',(171.67320357161,-84.63994392943,1.585)); +#192588 = DIRECTION('',(0.,0.,1.)); +#192589 = DIRECTION('',(-0.254822665256,0.966987802028,0.)); +#192590 = ORIENTED_EDGE('',*,*,#192591,.T.); +#192591 = EDGE_CURVE('',#192583,#192592,#192594,.T.); +#192592 = VERTEX_POINT('',#192593); +#192593 = CARTESIAN_POINT('',(171.507857,-84.651395,1.585)); +#192594 = LINE('',#192595,#192596); +#192595 = CARTESIAN_POINT('',(171.507857,-84.59637,1.585)); +#192596 = VECTOR('',#192597,1.); +#192597 = DIRECTION('',(0.,-1.,0.)); +#192598 = ORIENTED_EDGE('',*,*,#192599,.T.); +#192599 = EDGE_CURVE('',#192592,#192600,#192602,.T.); +#192600 = VERTEX_POINT('',#192601); +#192601 = CARTESIAN_POINT('',(171.539135,-84.713951,1.585)); +#192602 = LINE('',#192603,#192604); +#192603 = CARTESIAN_POINT('',(171.507857,-84.651395,1.585)); +#192604 = VECTOR('',#192605,1.); +#192605 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#192606 = ORIENTED_EDGE('',*,*,#192607,.T.); +#192607 = EDGE_CURVE('',#192600,#192608,#192610,.T.); +#192608 = VERTEX_POINT('',#192609); +#192609 = CARTESIAN_POINT('',(171.567073,-84.741889,1.585)); +#192610 = LINE('',#192611,#192612); +#192611 = CARTESIAN_POINT('',(171.539135,-84.713951,1.585)); +#192612 = VECTOR('',#192613,1.); +#192613 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#192614 = ORIENTED_EDGE('',*,*,#192615,.T.); +#192615 = EDGE_CURVE('',#192608,#192616,#192618,.T.); +#192616 = VERTEX_POINT('',#192617); +#192617 = CARTESIAN_POINT('',(171.636974,-84.776839,1.585)); +#192618 = LINE('',#192619,#192620); +#192619 = CARTESIAN_POINT('',(171.567073,-84.741889,1.585)); +#192620 = VECTOR('',#192621,1.); +#192621 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#192622 = ORIENTED_EDGE('',*,*,#192623,.T.); +#192623 = EDGE_CURVE('',#192616,#192624,#192626,.T.); +#192624 = VERTEX_POINT('',#192625); +#192625 = CARTESIAN_POINT('',(171.814783,-84.822887,1.585)); +#192626 = LINE('',#192627,#192628); +#192627 = CARTESIAN_POINT('',(171.636974,-84.776839,1.585)); +#192628 = VECTOR('',#192629,1.); +#192629 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#192630 = ORIENTED_EDGE('',*,*,#192631,.T.); +#192631 = EDGE_CURVE('',#192624,#192632,#192634,.T.); +#192632 = VERTEX_POINT('',#192633); +#192633 = CARTESIAN_POINT('',(171.917391,-84.877921,1.585)); +#192634 = LINE('',#192635,#192636); +#192635 = CARTESIAN_POINT('',(171.814783,-84.822887,1.585)); +#192636 = VECTOR('',#192637,1.); +#192637 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#192638 = ORIENTED_EDGE('',*,*,#192639,.T.); +#192639 = EDGE_CURVE('',#192632,#192640,#192642,.T.); +#192640 = VERTEX_POINT('',#192641); +#192641 = CARTESIAN_POINT('',(171.972424,-84.937671,1.585)); +#192642 = LINE('',#192643,#192644); +#192643 = CARTESIAN_POINT('',(171.917391,-84.877921,1.585)); +#192644 = VECTOR('',#192645,1.); +#192645 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#192646 = ORIENTED_EDGE('',*,*,#192647,.T.); +#192647 = EDGE_CURVE('',#192640,#192648,#192650,.T.); +#192648 = VERTEX_POINT('',#192649); +#192649 = CARTESIAN_POINT('',(171.966036,-85.26118,1.585)); +#192650 = CIRCLE('',#192651,0.260194262446); +#192651 = AXIS2_PLACEMENT_3D('',#192652,#192653,#192654); +#192652 = CARTESIAN_POINT('',(171.76548960304,-85.09540244761,1.585)); +#192653 = DIRECTION('',(0.,0.,-1.)); +#192654 = DIRECTION('',(0.795307302373,0.606206478679,0.)); +#192655 = ORIENTED_EDGE('',*,*,#192656,.T.); +#192656 = EDGE_CURVE('',#192648,#192657,#192659,.T.); +#192657 = VERTEX_POINT('',#192658); +#192658 = CARTESIAN_POINT('',(171.908736,-85.318484,1.585)); +#192659 = LINE('',#192660,#192661); +#192660 = CARTESIAN_POINT('',(171.966036,-85.26118,1.585)); +#192661 = VECTOR('',#192662,1.); +#192662 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#192663 = ORIENTED_EDGE('',*,*,#192664,.T.); +#192664 = EDGE_CURVE('',#192657,#192665,#192667,.T.); +#192665 = VERTEX_POINT('',#192666); +#192666 = CARTESIAN_POINT('',(171.80037,-85.371681,1.585)); +#192667 = LINE('',#192668,#192669); +#192668 = CARTESIAN_POINT('',(171.908736,-85.318484,1.585)); +#192669 = VECTOR('',#192670,1.); +#192670 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#192671 = ORIENTED_EDGE('',*,*,#192672,.T.); +#192672 = EDGE_CURVE('',#192665,#192673,#192675,.T.); +#192673 = VERTEX_POINT('',#192674); +#192674 = CARTESIAN_POINT('',(171.561213,-85.372564,1.585)); +#192675 = LINE('',#192676,#192677); +#192676 = CARTESIAN_POINT('',(171.80037,-85.371681,1.585)); +#192677 = VECTOR('',#192678,1.); +#192678 = DIRECTION('',(-0.999993184138,-3.692110126803E-03,0.)); +#192679 = ORIENTED_EDGE('',*,*,#192680,.T.); +#192680 = EDGE_CURVE('',#192673,#192681,#192683,.T.); +#192681 = VERTEX_POINT('',#192682); +#192682 = CARTESIAN_POINT('',(171.422302,-85.328404,1.585)); +#192683 = LINE('',#192684,#192685); +#192684 = CARTESIAN_POINT('',(171.561213,-85.372564,1.585)); +#192685 = VECTOR('',#192686,1.); +#192686 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#192687 = ORIENTED_EDGE('',*,*,#192688,.T.); +#192688 = EDGE_CURVE('',#192681,#192689,#192691,.T.); +#192689 = VERTEX_POINT('',#192690); +#192690 = CARTESIAN_POINT('',(171.463412,-85.205076,1.585)); +#192691 = CIRCLE('',#192692,6.499966862238E-02); +#192692 = AXIS2_PLACEMENT_3D('',#192693,#192694,#192695); +#192693 = CARTESIAN_POINT('',(171.44285712923,-85.26674004307,1.585)); +#192694 = DIRECTION('',(0.,0.,-1.)); +#192695 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#192696 = ORIENTED_EDGE('',*,*,#192697,.T.); +#192697 = EDGE_CURVE('',#192689,#192698,#192700,.T.); +#192698 = VERTEX_POINT('',#192699); +#192699 = CARTESIAN_POINT('',(171.581976,-85.244597,1.585)); +#192700 = LINE('',#192701,#192702); +#192701 = CARTESIAN_POINT('',(171.463412,-85.205076,1.585)); +#192702 = VECTOR('',#192703,1.); +#192703 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#192704 = ORIENTED_EDGE('',*,*,#192705,.T.); +#192705 = EDGE_CURVE('',#192698,#192706,#192708,.T.); +#192706 = VERTEX_POINT('',#192707); +#192707 = CARTESIAN_POINT('',(171.770369,-85.244597,1.585)); +#192708 = LINE('',#192709,#192710); +#192709 = CARTESIAN_POINT('',(171.581976,-85.244597,1.585)); +#192710 = VECTOR('',#192711,1.); +#192711 = DIRECTION('',(1.,0.,0.)); +#192712 = ORIENTED_EDGE('',*,*,#192713,.T.); +#192713 = EDGE_CURVE('',#192706,#192714,#192716,.T.); +#192714 = VERTEX_POINT('',#192715); +#192715 = CARTESIAN_POINT('',(171.892143,-85.122823,1.585)); +#192716 = CIRCLE('',#192717,0.170996196456); +#192717 = AXIS2_PLACEMENT_3D('',#192718,#192719,#192720); +#192718 = CARTESIAN_POINT('',(171.7267925,-85.0792465,1.585)); +#192719 = DIRECTION('',(0.,0.,1.)); +#192720 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#192721 = ORIENTED_EDGE('',*,*,#192722,.T.); +#192722 = EDGE_CURVE('',#192714,#192723,#192725,.T.); +#192723 = VERTEX_POINT('',#192724); +#192724 = CARTESIAN_POINT('',(171.892143,-85.067799,1.585)); +#192725 = LINE('',#192726,#192727); +#192726 = CARTESIAN_POINT('',(171.892143,-85.122823,1.585)); +#192727 = VECTOR('',#192728,1.); +#192728 = DIRECTION('',(0.,1.,0.)); +#192729 = ORIENTED_EDGE('',*,*,#192730,.T.); +#192730 = EDGE_CURVE('',#192723,#192731,#192733,.T.); +#192731 = VERTEX_POINT('',#192732); +#192732 = CARTESIAN_POINT('',(171.860864,-85.005242,1.585)); +#192733 = LINE('',#192734,#192735); +#192734 = CARTESIAN_POINT('',(171.892143,-85.067799,1.585)); +#192735 = VECTOR('',#192736,1.); +#192736 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#192737 = ORIENTED_EDGE('',*,*,#192738,.T.); +#192738 = EDGE_CURVE('',#192731,#192739,#192741,.T.); +#192739 = VERTEX_POINT('',#192740); +#192740 = CARTESIAN_POINT('',(171.832927,-84.977303,1.585)); +#192741 = LINE('',#192742,#192743); +#192742 = CARTESIAN_POINT('',(171.860864,-85.005242,1.585)); +#192743 = VECTOR('',#192744,1.); +#192744 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#192745 = ORIENTED_EDGE('',*,*,#192746,.T.); +#192746 = EDGE_CURVE('',#192739,#192747,#192749,.T.); +#192747 = VERTEX_POINT('',#192748); +#192748 = CARTESIAN_POINT('',(171.763025,-84.942353,1.585)); +#192749 = LINE('',#192750,#192751); +#192750 = CARTESIAN_POINT('',(171.832927,-84.977303,1.585)); +#192751 = VECTOR('',#192752,1.); +#192752 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#192753 = ORIENTED_EDGE('',*,*,#192754,.T.); +#192754 = EDGE_CURVE('',#192747,#192755,#192757,.T.); +#192755 = VERTEX_POINT('',#192756); +#192756 = CARTESIAN_POINT('',(171.585217,-84.896306,1.585)); +#192757 = LINE('',#192758,#192759); +#192758 = CARTESIAN_POINT('',(171.763025,-84.942353,1.585)); +#192759 = VECTOR('',#192760,1.); +#192760 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#192761 = ORIENTED_EDGE('',*,*,#192762,.T.); +#192762 = EDGE_CURVE('',#192755,#192763,#192765,.T.); +#192763 = VERTEX_POINT('',#192764); +#192764 = CARTESIAN_POINT('',(171.482609,-84.841273,1.585)); +#192765 = LINE('',#192766,#192767); +#192766 = CARTESIAN_POINT('',(171.585217,-84.896306,1.585)); +#192767 = VECTOR('',#192768,1.); +#192768 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#192769 = ORIENTED_EDGE('',*,*,#192770,.T.); +#192770 = EDGE_CURVE('',#192763,#192771,#192773,.T.); +#192771 = VERTEX_POINT('',#192772); +#192772 = CARTESIAN_POINT('',(171.427576,-84.781523,1.585)); +#192773 = LINE('',#192774,#192775); +#192774 = CARTESIAN_POINT('',(171.482609,-84.841273,1.585)); +#192775 = VECTOR('',#192776,1.); +#192776 = DIRECTION('',(-0.677476455829,0.735544459429,0.)); +#192777 = ORIENTED_EDGE('',*,*,#192778,.T.); +#192778 = EDGE_CURVE('',#192771,#192779,#192781,.T.); +#192779 = VERTEX_POINT('',#192780); +#192780 = CARTESIAN_POINT('',(171.433962,-84.458013,1.585)); +#192781 = CIRCLE('',#192782,0.260194992517); +#192782 = AXIS2_PLACEMENT_3D('',#192783,#192784,#192785); +#192783 = CARTESIAN_POINT('',(171.63450997292,-84.62378979176,1.585)); +#192784 = DIRECTION('',(0.,0.,-1.)); +#192785 = DIRECTION('',(-0.795303441169,-0.606211544319,-0.)); +#192786 = ORIENTED_EDGE('',*,*,#192787,.T.); +#192787 = EDGE_CURVE('',#192779,#192532,#192788,.T.); +#192788 = LINE('',#192789,#192790); +#192789 = CARTESIAN_POINT('',(171.433962,-84.458013,1.585)); +#192790 = VECTOR('',#192791,1.); +#192791 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#192792 = PLANE('',#192793); +#192793 = AXIS2_PLACEMENT_3D('',#192794,#192795,#192796); +#192794 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192795 = DIRECTION('',(0.,0.,1.)); +#192796 = DIRECTION('',(1.,0.,-0.)); +#192797 = SHELL_BASED_SURFACE_MODEL('',(#192798)); +#192798 = OPEN_SHELL('',(#192799)); +#192799 = ADVANCED_FACE('',(#192800),#192912,.T.); +#192800 = FACE_BOUND('',#192801,.F.); +#192801 = EDGE_LOOP('',(#192802,#192813,#192821,#192830,#192838,#192847, + #192855,#192864,#192872,#192881,#192889,#192898,#192906)); +#192802 = ORIENTED_EDGE('',*,*,#192803,.T.); +#192803 = EDGE_CURVE('',#192804,#192806,#192808,.T.); +#192804 = VERTEX_POINT('',#192805); +#192805 = CARTESIAN_POINT('',(170.482805,-84.384723,1.585)); +#192806 = VERTEX_POINT('',#192807); +#192807 = CARTESIAN_POINT('',(170.607857,-84.409597,1.585)); +#192808 = CIRCLE('',#192809,6.499988811647E-02); +#192809 = AXIS2_PLACEMENT_3D('',#192810,#192811,#192812); +#192810 = CARTESIAN_POINT('',(170.54285711188,-84.4095972701,1.585)); +#192811 = DIRECTION('',(0.,0.,-1.)); +#192812 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#192813 = ORIENTED_EDGE('',*,*,#192814,.T.); +#192814 = EDGE_CURVE('',#192806,#192815,#192817,.T.); +#192815 = VERTEX_POINT('',#192816); +#192816 = CARTESIAN_POINT('',(170.607857,-85.122823,1.585)); +#192817 = LINE('',#192818,#192819); +#192818 = CARTESIAN_POINT('',(170.607857,-84.409597,1.585)); +#192819 = VECTOR('',#192820,1.); +#192820 = DIRECTION('',(0.,-1.,0.)); +#192821 = ORIENTED_EDGE('',*,*,#192822,.T.); +#192822 = EDGE_CURVE('',#192815,#192823,#192825,.T.); +#192823 = VERTEX_POINT('',#192824); +#192824 = CARTESIAN_POINT('',(170.729631,-85.244597,1.585)); +#192825 = CIRCLE('',#192826,0.170999251022); +#192826 = AXIS2_PLACEMENT_3D('',#192827,#192828,#192829); +#192827 = CARTESIAN_POINT('',(170.77321,-85.079244,1.585)); +#192828 = DIRECTION('',(0.,0.,1.)); +#192829 = DIRECTION('',(-0.966980843553,-0.254849069453,0.)); +#192830 = ORIENTED_EDGE('',*,*,#192831,.T.); +#192831 = EDGE_CURVE('',#192823,#192832,#192834,.T.); +#192832 = VERTEX_POINT('',#192833); +#192833 = CARTESIAN_POINT('',(170.870369,-85.244597,1.585)); +#192834 = LINE('',#192835,#192836); +#192835 = CARTESIAN_POINT('',(170.729631,-85.244597,1.585)); +#192836 = VECTOR('',#192837,1.); +#192837 = DIRECTION('',(1.,0.,0.)); +#192838 = ORIENTED_EDGE('',*,*,#192839,.T.); +#192839 = EDGE_CURVE('',#192832,#192840,#192842,.T.); +#192840 = VERTEX_POINT('',#192841); +#192841 = CARTESIAN_POINT('',(170.992143,-85.122823,1.585)); +#192842 = CIRCLE('',#192843,0.170996196456); +#192843 = AXIS2_PLACEMENT_3D('',#192844,#192845,#192846); +#192844 = CARTESIAN_POINT('',(170.8267925,-85.0792465,1.585)); +#192845 = DIRECTION('',(0.,0.,1.)); +#192846 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#192847 = ORIENTED_EDGE('',*,*,#192848,.T.); +#192848 = EDGE_CURVE('',#192840,#192849,#192851,.T.); +#192849 = VERTEX_POINT('',#192850); +#192850 = CARTESIAN_POINT('',(170.992143,-84.409597,1.585)); +#192851 = LINE('',#192852,#192853); +#192852 = CARTESIAN_POINT('',(170.992143,-85.122823,1.585)); +#192853 = VECTOR('',#192854,1.); +#192854 = DIRECTION('',(0.,1.,0.)); +#192855 = ORIENTED_EDGE('',*,*,#192856,.T.); +#192856 = EDGE_CURVE('',#192849,#192857,#192859,.T.); +#192857 = VERTEX_POINT('',#192858); +#192858 = CARTESIAN_POINT('',(171.122143,-84.409597,1.585)); +#192859 = CIRCLE('',#192860,6.500000000091E-02); +#192860 = AXIS2_PLACEMENT_3D('',#192861,#192862,#192863); +#192861 = CARTESIAN_POINT('',(171.057143,-84.40959734486,1.585)); +#192862 = DIRECTION('',(0.,0.,-1.)); +#192863 = DIRECTION('',(-0.999999999986,5.305658244297E-06,0.)); +#192864 = ORIENTED_EDGE('',*,*,#192865,.T.); +#192865 = EDGE_CURVE('',#192857,#192866,#192868,.T.); +#192866 = VERTEX_POINT('',#192867); +#192867 = CARTESIAN_POINT('',(171.119227,-85.152824,1.585)); +#192868 = LINE('',#192869,#192870); +#192869 = CARTESIAN_POINT('',(171.122143,-84.409597,1.585)); +#192870 = VECTOR('',#192871,1.); +#192871 = DIRECTION('',(-3.923401002397E-03,-0.999992303433,0.)); +#192872 = ORIENTED_EDGE('',*,*,#192873,.T.); +#192873 = EDGE_CURVE('',#192866,#192874,#192876,.T.); +#192874 = VERTEX_POINT('',#192875); +#192875 = CARTESIAN_POINT('',(170.90037,-85.371681,1.585)); +#192876 = CIRCLE('',#192877,0.308111908981); +#192877 = AXIS2_PLACEMENT_3D('',#192878,#192879,#192880); +#192878 = CARTESIAN_POINT('',(170.82140561898,-85.07385961898,1.585)); +#192879 = DIRECTION('',(0.,0.,-1.)); +#192880 = DIRECTION('',(0.966601330004,-0.256284741711,0.)); +#192881 = ORIENTED_EDGE('',*,*,#192882,.T.); +#192882 = EDGE_CURVE('',#192874,#192883,#192885,.T.); +#192883 = VERTEX_POINT('',#192884); +#192884 = CARTESIAN_POINT('',(170.699629,-85.371681,1.585)); +#192885 = LINE('',#192886,#192887); +#192886 = CARTESIAN_POINT('',(170.90037,-85.371681,1.585)); +#192887 = VECTOR('',#192888,1.); +#192888 = DIRECTION('',(-1.,0.,0.)); +#192889 = ORIENTED_EDGE('',*,*,#192890,.T.); +#192890 = EDGE_CURVE('',#192883,#192891,#192893,.T.); +#192891 = VERTEX_POINT('',#192892); +#192892 = CARTESIAN_POINT('',(170.480772,-85.152824,1.585)); +#192893 = CIRCLE('',#192894,0.308110297261); +#192894 = AXIS2_PLACEMENT_3D('',#192895,#192896,#192897); +#192895 = CARTESIAN_POINT('',(170.77859206304,-85.07386093695,1.585)); +#192896 = DIRECTION('',(0.,0.,-1.)); +#192897 = DIRECTION('',(-0.256281804756,-0.966602108704,-0.)); +#192898 = ORIENTED_EDGE('',*,*,#192899,.T.); +#192899 = EDGE_CURVE('',#192891,#192900,#192902,.T.); +#192900 = VERTEX_POINT('',#192901); +#192901 = CARTESIAN_POINT('',(170.477857,-84.409597,1.585)); +#192902 = LINE('',#192903,#192904); +#192903 = CARTESIAN_POINT('',(170.480772,-85.152824,1.585)); +#192904 = VECTOR('',#192905,1.); +#192905 = DIRECTION('',(-3.922055549506E-03,0.999992308711,0.)); +#192906 = ORIENTED_EDGE('',*,*,#192907,.T.); +#192907 = EDGE_CURVE('',#192900,#192804,#192908,.T.); +#192908 = LINE('',#192909,#192910); +#192909 = CARTESIAN_POINT('',(170.477857,-84.409597,1.585)); +#192910 = VECTOR('',#192911,1.); +#192911 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#192912 = PLANE('',#192913); +#192913 = AXIS2_PLACEMENT_3D('',#192914,#192915,#192916); +#192914 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192915 = DIRECTION('',(0.,0.,1.)); +#192916 = DIRECTION('',(1.,0.,-0.)); +#192917 = SHELL_BASED_SURFACE_MODEL('',(#192918)); +#192918 = OPEN_SHELL('',(#192919)); +#192919 = ADVANCED_FACE('',(#192920),#192964,.T.); +#192920 = FACE_BOUND('',#192921,.F.); +#192921 = EDGE_LOOP('',(#192922,#192933,#192941,#192950,#192958)); +#192922 = ORIENTED_EDGE('',*,*,#192923,.T.); +#192923 = EDGE_CURVE('',#192924,#192926,#192928,.T.); +#192924 = VERTEX_POINT('',#192925); +#192925 = CARTESIAN_POINT('',(148.306688,-84.453697,1.585)); +#192926 = VERTEX_POINT('',#192927); +#192927 = CARTESIAN_POINT('',(148.43174,-84.478571,1.585)); +#192928 = CIRCLE('',#192929,6.499988811647E-02); +#192929 = AXIS2_PLACEMENT_3D('',#192930,#192931,#192932); +#192930 = CARTESIAN_POINT('',(148.36674011188,-84.4785712701,1.585)); +#192931 = DIRECTION('',(0.,0.,-1.)); +#192932 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#192933 = ORIENTED_EDGE('',*,*,#192934,.T.); +#192934 = EDGE_CURVE('',#192926,#192935,#192937,.T.); +#192935 = VERTEX_POINT('',#192936); +#192936 = CARTESIAN_POINT('',(148.43174,-85.164285,1.585)); +#192937 = LINE('',#192938,#192939); +#192938 = CARTESIAN_POINT('',(148.43174,-84.478571,1.585)); +#192939 = VECTOR('',#192940,1.); +#192940 = DIRECTION('',(0.,-1.,0.)); +#192941 = ORIENTED_EDGE('',*,*,#192942,.T.); +#192942 = EDGE_CURVE('',#192935,#192943,#192945,.T.); +#192943 = VERTEX_POINT('',#192944); +#192944 = CARTESIAN_POINT('',(148.30174,-85.164285,1.585)); +#192945 = CIRCLE('',#192946,6.500000000092E-02); +#192946 = AXIS2_PLACEMENT_3D('',#192947,#192948,#192949); +#192947 = CARTESIAN_POINT('',(148.36674,-85.16428465513,1.585)); +#192948 = DIRECTION('',(-0.,0.,-1.)); +#192949 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#192950 = ORIENTED_EDGE('',*,*,#192951,.T.); +#192951 = EDGE_CURVE('',#192943,#192952,#192954,.T.); +#192952 = VERTEX_POINT('',#192953); +#192953 = CARTESIAN_POINT('',(148.30174,-84.478571,1.585)); +#192954 = LINE('',#192955,#192956); +#192955 = CARTESIAN_POINT('',(148.30174,-85.164285,1.585)); +#192956 = VECTOR('',#192957,1.); +#192957 = DIRECTION('',(0.,1.,0.)); +#192958 = ORIENTED_EDGE('',*,*,#192959,.T.); +#192959 = EDGE_CURVE('',#192952,#192924,#192960,.T.); +#192960 = LINE('',#192961,#192962); +#192961 = CARTESIAN_POINT('',(148.30174,-84.478571,1.585)); +#192962 = VECTOR('',#192963,1.); +#192963 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#192964 = PLANE('',#192965); +#192965 = AXIS2_PLACEMENT_3D('',#192966,#192967,#192968); +#192966 = CARTESIAN_POINT('',(0.,0.,1.585)); +#192967 = DIRECTION('',(0.,0.,1.)); +#192968 = DIRECTION('',(1.,0.,-0.)); +#192969 = SHELL_BASED_SURFACE_MODEL('',(#192970)); +#192970 = OPEN_SHELL('',(#192971)); +#192971 = ADVANCED_FACE('',(#192972),#193008,.T.); +#192972 = FACE_BOUND('',#192973,.F.); +#192973 = EDGE_LOOP('',(#192974,#192985,#192993,#193002)); +#192974 = ORIENTED_EDGE('',*,*,#192975,.T.); +#192975 = EDGE_CURVE('',#192976,#192978,#192980,.T.); +#192976 = VERTEX_POINT('',#192977); +#192977 = CARTESIAN_POINT('',(202.812742,-85.0325,1.585)); +#192978 = VERTEX_POINT('',#192979); +#192979 = CARTESIAN_POINT('',(202.812742,-84.9125,1.585)); +#192980 = CIRCLE('',#192981,6.000000000042E-02); +#192981 = AXIS2_PLACEMENT_3D('',#192982,#192983,#192984); +#192982 = CARTESIAN_POINT('',(202.81274177441,-84.9725,1.585)); +#192983 = DIRECTION('',(0.,0.,-1.)); +#192984 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#192985 = ORIENTED_EDGE('',*,*,#192986,.T.); +#192986 = EDGE_CURVE('',#192978,#192987,#192989,.T.); +#192987 = VERTEX_POINT('',#192988); +#192988 = CARTESIAN_POINT('',(203.287258,-84.9125,1.585)); +#192989 = LINE('',#192990,#192991); +#192990 = CARTESIAN_POINT('',(202.812742,-84.9125,1.585)); +#192991 = VECTOR('',#192992,1.); +#192992 = DIRECTION('',(1.,0.,0.)); +#192993 = ORIENTED_EDGE('',*,*,#192994,.T.); +#192994 = EDGE_CURVE('',#192987,#192995,#192997,.T.); +#192995 = VERTEX_POINT('',#192996); +#192996 = CARTESIAN_POINT('',(203.287258,-85.0325,1.585)); +#192997 = CIRCLE('',#192998,6.000000000043E-02); +#192998 = AXIS2_PLACEMENT_3D('',#192999,#193000,#193001); +#192999 = CARTESIAN_POINT('',(203.28725822558,-84.9725,1.585)); +#193000 = DIRECTION('',(0.,0.,-1.)); +#193001 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#193002 = ORIENTED_EDGE('',*,*,#193003,.T.); +#193003 = EDGE_CURVE('',#192995,#192976,#193004,.T.); +#193004 = LINE('',#193005,#193006); +#193005 = CARTESIAN_POINT('',(203.287258,-85.0325,1.585)); +#193006 = VECTOR('',#193007,1.); +#193007 = DIRECTION('',(-1.,0.,0.)); +#193008 = PLANE('',#193009); +#193009 = AXIS2_PLACEMENT_3D('',#193010,#193011,#193012); +#193010 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193011 = DIRECTION('',(0.,0.,1.)); +#193012 = DIRECTION('',(1.,0.,-0.)); +#193013 = SHELL_BASED_SURFACE_MODEL('',(#193014)); +#193014 = OPEN_SHELL('',(#193015)); +#193015 = ADVANCED_FACE('',(#193016),#193102,.T.); +#193016 = FACE_BOUND('',#193017,.F.); +#193017 = EDGE_LOOP('',(#193018,#193029,#193037,#193046,#193054,#193063, + #193071,#193079,#193087,#193096)); +#193018 = ORIENTED_EDGE('',*,*,#193019,.T.); +#193019 = EDGE_CURVE('',#193020,#193022,#193024,.T.); +#193020 = VERTEX_POINT('',#193021); +#193021 = CARTESIAN_POINT('',(110.59665,-84.6681,1.585)); +#193022 = VERTEX_POINT('',#193023); +#193023 = CARTESIAN_POINT('',(110.65665,-84.6081,1.585)); +#193024 = CIRCLE('',#193025,5.999932016264E-02); +#193025 = AXIS2_PLACEMENT_3D('',#193026,#193027,#193028); +#193026 = CARTESIAN_POINT('',(110.65664932015,-84.66809932015,1.585)); +#193027 = DIRECTION('',(0.,0.,-1.)); +#193028 = DIRECTION('',(-0.999999999936,-1.133081517402E-05,-0.)); +#193029 = ORIENTED_EDGE('',*,*,#193030,.T.); +#193030 = EDGE_CURVE('',#193022,#193031,#193033,.T.); +#193031 = VERTEX_POINT('',#193032); +#193032 = CARTESIAN_POINT('',(114.77665,-84.6081,1.585)); +#193033 = LINE('',#193034,#193035); +#193034 = CARTESIAN_POINT('',(110.65665,-84.6081,1.585)); +#193035 = VECTOR('',#193036,1.); +#193036 = DIRECTION('',(1.,0.,0.)); +#193037 = ORIENTED_EDGE('',*,*,#193038,.T.); +#193038 = EDGE_CURVE('',#193031,#193039,#193041,.T.); +#193039 = VERTEX_POINT('',#193040); +#193040 = CARTESIAN_POINT('',(114.83665,-84.6681,1.585)); +#193041 = CIRCLE('',#193042,5.999932016264E-02); +#193042 = AXIS2_PLACEMENT_3D('',#193043,#193044,#193045); +#193043 = CARTESIAN_POINT('',(114.77665067984,-84.66809932015,1.585)); +#193044 = DIRECTION('',(0.,0.,-1.)); +#193045 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#193046 = ORIENTED_EDGE('',*,*,#193047,.T.); +#193047 = EDGE_CURVE('',#193039,#193048,#193050,.T.); +#193048 = VERTEX_POINT('',#193049); +#193049 = CARTESIAN_POINT('',(114.83665,-84.7631,1.585)); +#193050 = LINE('',#193051,#193052); +#193051 = CARTESIAN_POINT('',(114.83665,-84.6681,1.585)); +#193052 = VECTOR('',#193053,1.); +#193053 = DIRECTION('',(0.,-1.,0.)); +#193054 = ORIENTED_EDGE('',*,*,#193055,.T.); +#193055 = EDGE_CURVE('',#193048,#193056,#193058,.T.); +#193056 = VERTEX_POINT('',#193057); +#193057 = CARTESIAN_POINT('',(114.721217,-84.786061,1.585)); +#193058 = CIRCLE('',#193059,6.000007318648E-02); +#193059 = AXIS2_PLACEMENT_3D('',#193060,#193061,#193062); +#193060 = CARTESIAN_POINT('',(114.77664992681,-84.76310017668,1.585)); +#193061 = DIRECTION('',(0.,0.,-1.)); +#193062 = DIRECTION('',(0.999999999996,2.944769485282E-06,0.)); +#193063 = ORIENTED_EDGE('',*,*,#193064,.T.); +#193064 = EDGE_CURVE('',#193056,#193065,#193067,.T.); +#193065 = VERTEX_POINT('',#193066); +#193066 = CARTESIAN_POINT('',(114.71665,-84.7281,1.585)); +#193067 = LINE('',#193068,#193069); +#193068 = CARTESIAN_POINT('',(114.721217,-84.786061,1.585)); +#193069 = VECTOR('',#193070,1.); +#193070 = DIRECTION('',(-7.85508953971E-02,0.99691010469,0.)); +#193071 = ORIENTED_EDGE('',*,*,#193072,.T.); +#193072 = EDGE_CURVE('',#193065,#193073,#193075,.T.); +#193073 = VERTEX_POINT('',#193074); +#193074 = CARTESIAN_POINT('',(110.71665,-84.7281,1.585)); +#193075 = LINE('',#193076,#193077); +#193076 = CARTESIAN_POINT('',(114.71665,-84.7281,1.585)); +#193077 = VECTOR('',#193078,1.); +#193078 = DIRECTION('',(-1.,0.,0.)); +#193079 = ORIENTED_EDGE('',*,*,#193080,.T.); +#193080 = EDGE_CURVE('',#193073,#193081,#193083,.T.); +#193081 = VERTEX_POINT('',#193082); +#193082 = CARTESIAN_POINT('',(110.712083,-84.786061,1.585)); +#193083 = LINE('',#193084,#193085); +#193084 = CARTESIAN_POINT('',(110.71665,-84.7281,1.585)); +#193085 = VECTOR('',#193086,1.); +#193086 = DIRECTION('',(-7.85508953971E-02,-0.99691010469,0.)); +#193087 = ORIENTED_EDGE('',*,*,#193088,.T.); +#193088 = EDGE_CURVE('',#193081,#193089,#193091,.T.); +#193089 = VERTEX_POINT('',#193090); +#193090 = CARTESIAN_POINT('',(110.59665,-84.7631,1.585)); +#193091 = CIRCLE('',#193092,6.000007318648E-02); +#193092 = AXIS2_PLACEMENT_3D('',#193093,#193094,#193095); +#193093 = CARTESIAN_POINT('',(110.65665007318,-84.76310017668,1.585)); +#193094 = DIRECTION('',(-0.,0.,-1.)); +#193095 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#193096 = ORIENTED_EDGE('',*,*,#193097,.T.); +#193097 = EDGE_CURVE('',#193089,#193020,#193098,.T.); +#193098 = LINE('',#193099,#193100); +#193099 = CARTESIAN_POINT('',(110.59665,-84.7631,1.585)); +#193100 = VECTOR('',#193101,1.); +#193101 = DIRECTION('',(0.,1.,0.)); +#193102 = PLANE('',#193103); +#193103 = AXIS2_PLACEMENT_3D('',#193104,#193105,#193106); +#193104 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193105 = DIRECTION('',(0.,0.,1.)); +#193106 = DIRECTION('',(1.,0.,-0.)); +#193107 = SHELL_BASED_SURFACE_MODEL('',(#193108)); +#193108 = OPEN_SHELL('',(#193109)); +#193109 = ADVANCED_FACE('',(#193110),#193170,.T.); +#193110 = FACE_BOUND('',#193111,.F.); +#193111 = EDGE_LOOP('',(#193112,#193123,#193131,#193140,#193148,#193156, + #193164)); +#193112 = ORIENTED_EDGE('',*,*,#193113,.T.); +#193113 = EDGE_CURVE('',#193114,#193116,#193118,.T.); +#193114 = VERTEX_POINT('',#193115); +#193115 = CARTESIAN_POINT('',(109.828126,-84.46339,1.585)); +#193116 = VERTEX_POINT('',#193117); +#193117 = CARTESIAN_POINT('',(109.87665,-84.3681,1.585)); +#193118 = CIRCLE('',#193119,5.999941814204E-02); +#193119 = AXIS2_PLACEMENT_3D('',#193120,#193121,#193122); +#193120 = CARTESIAN_POINT('',(109.87664924194,-84.42809941813,1.585)); +#193121 = DIRECTION('',(0.,0.,-1.)); +#193122 = DIRECTION('',(-0.80872854189,-0.588182068353,-0.)); +#193123 = ORIENTED_EDGE('',*,*,#193124,.T.); +#193124 = EDGE_CURVE('',#193116,#193125,#193127,.T.); +#193125 = VERTEX_POINT('',#193126); +#193126 = CARTESIAN_POINT('',(110.35665,-84.3681,1.585)); +#193127 = LINE('',#193128,#193129); +#193128 = CARTESIAN_POINT('',(109.87665,-84.3681,1.585)); +#193129 = VECTOR('',#193130,1.); +#193130 = DIRECTION('',(1.,0.,0.)); +#193131 = ORIENTED_EDGE('',*,*,#193132,.T.); +#193132 = EDGE_CURVE('',#193125,#193133,#193135,.T.); +#193133 = VERTEX_POINT('',#193134); +#193134 = CARTESIAN_POINT('',(110.405174,-84.46339,1.585)); +#193135 = CIRCLE('',#193136,6.000027696175E-02); +#193136 = AXIS2_PLACEMENT_3D('',#193137,#193138,#193139); +#193137 = CARTESIAN_POINT('',(110.35664907153,-84.42810027695,1.585)); +#193138 = DIRECTION('',(0.,0.,-1.)); +#193139 = DIRECTION('',(1.547440182805E-05,0.99999999988,0.)); +#193140 = ORIENTED_EDGE('',*,*,#193141,.T.); +#193141 = EDGE_CURVE('',#193133,#193142,#193144,.T.); +#193142 = VERTEX_POINT('',#193143); +#193143 = CARTESIAN_POINT('',(110.165174,-84.79339,1.585)); +#193144 = LINE('',#193145,#193146); +#193145 = CARTESIAN_POINT('',(110.405174,-84.46339,1.585)); +#193146 = VECTOR('',#193147,1.); +#193147 = DIRECTION('',(-0.588171697675,-0.808736084303,0.)); +#193148 = ORIENTED_EDGE('',*,*,#193149,.T.); +#193149 = EDGE_CURVE('',#193142,#193150,#193152,.T.); +#193150 = VERTEX_POINT('',#193151); +#193151 = CARTESIAN_POINT('',(110.126008,-84.817366,1.585)); +#193152 = LINE('',#193153,#193154); +#193153 = CARTESIAN_POINT('',(110.165174,-84.79339,1.585)); +#193154 = VECTOR('',#193155,1.); +#193155 = DIRECTION('',(-0.852882175679,-0.522103432673,0.)); +#193156 = ORIENTED_EDGE('',*,*,#193157,.T.); +#193157 = EDGE_CURVE('',#193150,#193158,#193160,.T.); +#193158 = VERTEX_POINT('',#193159); +#193159 = CARTESIAN_POINT('',(110.08136,-84.806624,1.585)); +#193160 = LINE('',#193161,#193162); +#193161 = CARTESIAN_POINT('',(110.126008,-84.817366,1.585)); +#193162 = VECTOR('',#193163,1.); +#193163 = DIRECTION('',(-0.972256295266,0.233918140202,0.)); +#193164 = ORIENTED_EDGE('',*,*,#193165,.T.); +#193165 = EDGE_CURVE('',#193158,#193114,#193166,.T.); +#193166 = LINE('',#193167,#193168); +#193167 = CARTESIAN_POINT('',(110.08136,-84.806624,1.585)); +#193168 = VECTOR('',#193169,1.); +#193169 = DIRECTION('',(-0.593692353743,0.804692108267,0.)); +#193170 = PLANE('',#193171); +#193171 = AXIS2_PLACEMENT_3D('',#193172,#193173,#193174); +#193172 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193173 = DIRECTION('',(0.,0.,1.)); +#193174 = DIRECTION('',(1.,0.,-0.)); +#193175 = SHELL_BASED_SURFACE_MODEL('',(#193176)); +#193176 = OPEN_SHELL('',(#193177)); +#193177 = ADVANCED_FACE('',(#193178),#193214,.T.); +#193178 = FACE_BOUND('',#193179,.F.); +#193179 = EDGE_LOOP('',(#193180,#193191,#193199,#193208)); +#193180 = ORIENTED_EDGE('',*,*,#193181,.T.); +#193181 = EDGE_CURVE('',#193182,#193184,#193186,.T.); +#193182 = VERTEX_POINT('',#193183); +#193183 = CARTESIAN_POINT('',(185.04894,-84.4667,1.585)); +#193184 = VERTEX_POINT('',#193185); +#193185 = CARTESIAN_POINT('',(185.04894,-84.250928,1.585)); +#193186 = CIRCLE('',#193187,0.109999639072); +#193187 = AXIS2_PLACEMENT_3D('',#193188,#193189,#193190); +#193188 = CARTESIAN_POINT('',(185.0704,-84.358814,1.585)); +#193189 = DIRECTION('',(0.,0.,-1.)); +#193190 = DIRECTION('',(-0.195091549218,-0.980785036297,-0.)); +#193191 = ORIENTED_EDGE('',*,*,#193192,.T.); +#193192 = EDGE_CURVE('',#193184,#193193,#193195,.T.); +#193193 = VERTEX_POINT('',#193194); +#193194 = CARTESIAN_POINT('',(186.69186,-84.250928,1.585)); +#193195 = LINE('',#193196,#193197); +#193196 = CARTESIAN_POINT('',(185.04894,-84.250928,1.585)); +#193197 = VECTOR('',#193198,1.); +#193198 = DIRECTION('',(1.,0.,0.)); +#193199 = ORIENTED_EDGE('',*,*,#193200,.T.); +#193200 = EDGE_CURVE('',#193193,#193201,#193203,.T.); +#193201 = VERTEX_POINT('',#193202); +#193202 = CARTESIAN_POINT('',(186.69186,-84.4667,1.585)); +#193203 = CIRCLE('',#193204,0.109999639072); +#193204 = AXIS2_PLACEMENT_3D('',#193205,#193206,#193207); +#193205 = CARTESIAN_POINT('',(186.6704,-84.358814,1.585)); +#193206 = DIRECTION('',(0.,0.,-1.)); +#193207 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#193208 = ORIENTED_EDGE('',*,*,#193209,.T.); +#193209 = EDGE_CURVE('',#193201,#193182,#193210,.T.); +#193210 = LINE('',#193211,#193212); +#193211 = CARTESIAN_POINT('',(186.69186,-84.4667,1.585)); +#193212 = VECTOR('',#193213,1.); +#193213 = DIRECTION('',(-1.,0.,0.)); +#193214 = PLANE('',#193215); +#193215 = AXIS2_PLACEMENT_3D('',#193216,#193217,#193218); +#193216 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193217 = DIRECTION('',(0.,0.,1.)); +#193218 = DIRECTION('',(1.,0.,-0.)); +#193219 = SHELL_BASED_SURFACE_MODEL('',(#193220)); +#193220 = OPEN_SHELL('',(#193221)); +#193221 = ADVANCED_FACE('',(#193222,#193410),#193544,.T.); +#193222 = FACE_BOUND('',#193223,.F.); +#193223 = EDGE_LOOP('',(#193224,#193235,#193243,#193251,#193259,#193267, + #193275,#193283,#193291,#193299,#193307,#193316,#193324,#193332, + #193340,#193348,#193356,#193364,#193372,#193380,#193388,#193396, + #193404)); +#193224 = ORIENTED_EDGE('',*,*,#193225,.T.); +#193225 = EDGE_CURVE('',#193226,#193228,#193230,.T.); +#193226 = VERTEX_POINT('',#193227); +#193227 = CARTESIAN_POINT('',(112.010147,-83.267418,1.585)); +#193228 = VERTEX_POINT('',#193229); +#193229 = CARTESIAN_POINT('',(112.478218,-83.272786,1.585)); +#193230 = CIRCLE('',#193231,0.397578964435); +#193231 = AXIS2_PLACEMENT_3D('',#193232,#193233,#193234); +#193232 = CARTESIAN_POINT('',(112.24049697212,-83.59146726061,1.585)); +#193233 = DIRECTION('',(0.,0.,-1.)); +#193234 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#193235 = ORIENTED_EDGE('',*,*,#193236,.T.); +#193236 = EDGE_CURVE('',#193228,#193237,#193239,.T.); +#193237 = VERTEX_POINT('',#193238); +#193238 = CARTESIAN_POINT('',(112.588534,-83.384108,1.585)); +#193239 = LINE('',#193240,#193241); +#193240 = CARTESIAN_POINT('',(112.478218,-83.272786,1.585)); +#193241 = VECTOR('',#193242,1.); +#193242 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#193243 = ORIENTED_EDGE('',*,*,#193244,.T.); +#193244 = EDGE_CURVE('',#193237,#193245,#193247,.T.); +#193245 = VERTEX_POINT('',#193246); +#193246 = CARTESIAN_POINT('',(112.598934,-83.407586,1.585)); +#193247 = LINE('',#193248,#193249); +#193248 = CARTESIAN_POINT('',(112.588534,-83.384108,1.585)); +#193249 = VECTOR('',#193250,1.); +#193250 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#193251 = ORIENTED_EDGE('',*,*,#193252,.T.); +#193252 = EDGE_CURVE('',#193245,#193253,#193255,.T.); +#193253 = VERTEX_POINT('',#193254); +#193254 = CARTESIAN_POINT('',(112.648792,-83.616252,1.585)); +#193255 = LINE('',#193256,#193257); +#193256 = CARTESIAN_POINT('',(112.598934,-83.407586,1.585)); +#193257 = VECTOR('',#193258,1.); +#193258 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#193259 = ORIENTED_EDGE('',*,*,#193260,.T.); +#193260 = EDGE_CURVE('',#193253,#193261,#193263,.T.); +#193261 = VERTEX_POINT('',#193262); +#193262 = CARTESIAN_POINT('',(112.646553,-83.967775,1.585)); +#193263 = LINE('',#193264,#193265); +#193264 = CARTESIAN_POINT('',(112.648792,-83.616252,1.585)); +#193265 = VECTOR('',#193266,1.); +#193266 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#193267 = ORIENTED_EDGE('',*,*,#193268,.T.); +#193268 = EDGE_CURVE('',#193261,#193269,#193271,.T.); +#193269 = VERTEX_POINT('',#193270); +#193270 = CARTESIAN_POINT('',(112.593987,-84.172097,1.585)); +#193271 = LINE('',#193272,#193273); +#193272 = CARTESIAN_POINT('',(112.646553,-83.967775,1.585)); +#193273 = VECTOR('',#193274,1.); +#193274 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#193275 = ORIENTED_EDGE('',*,*,#193276,.T.); +#193276 = EDGE_CURVE('',#193269,#193277,#193279,.T.); +#193277 = VERTEX_POINT('',#193278); +#193278 = CARTESIAN_POINT('',(112.579207,-84.193093,1.585)); +#193279 = LINE('',#193280,#193281); +#193280 = CARTESIAN_POINT('',(112.593987,-84.172097,1.585)); +#193281 = VECTOR('',#193282,1.); +#193282 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#193283 = ORIENTED_EDGE('',*,*,#193284,.T.); +#193284 = EDGE_CURVE('',#193277,#193285,#193287,.T.); +#193285 = VERTEX_POINT('',#193286); +#193286 = CARTESIAN_POINT('',(112.537,-84.235299,1.585)); +#193287 = LINE('',#193288,#193289); +#193288 = CARTESIAN_POINT('',(112.579207,-84.193093,1.585)); +#193289 = VECTOR('',#193290,1.); +#193290 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#193291 = ORIENTED_EDGE('',*,*,#193292,.T.); +#193292 = EDGE_CURVE('',#193285,#193293,#193295,.T.); +#193293 = VERTEX_POINT('',#193294); +#193294 = CARTESIAN_POINT('',(112.5706,-84.268899,1.585)); +#193295 = LINE('',#193296,#193297); +#193296 = CARTESIAN_POINT('',(112.537,-84.235299,1.585)); +#193297 = VECTOR('',#193298,1.); +#193298 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#193299 = ORIENTED_EDGE('',*,*,#193300,.T.); +#193300 = EDGE_CURVE('',#193293,#193301,#193303,.T.); +#193301 = VERTEX_POINT('',#193302); +#193302 = CARTESIAN_POINT('',(112.667395,-84.318907,1.585)); +#193303 = LINE('',#193304,#193305); +#193304 = CARTESIAN_POINT('',(112.5706,-84.268899,1.585)); +#193305 = VECTOR('',#193306,1.); +#193306 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#193307 = ORIENTED_EDGE('',*,*,#193308,.T.); +#193308 = EDGE_CURVE('',#193301,#193309,#193311,.T.); +#193309 = VERTEX_POINT('',#193310); +#193310 = CARTESIAN_POINT('',(112.58787,-84.445239,1.585)); +#193311 = CIRCLE('',#193312,7.500029440362E-02); +#193312 = AXIS2_PLACEMENT_3D('',#193313,#193314,#193315); +#193313 = CARTESIAN_POINT('',(112.62141105397,-84.37815664867,1.585)); +#193314 = DIRECTION('',(0.,0.,-1.)); +#193315 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#193316 = ORIENTED_EDGE('',*,*,#193317,.T.); +#193317 = EDGE_CURVE('',#193309,#193318,#193320,.T.); +#193318 = VERTEX_POINT('',#193319); +#193319 = CARTESIAN_POINT('',(112.47889,-84.388291,1.585)); +#193320 = LINE('',#193321,#193322); +#193321 = CARTESIAN_POINT('',(112.58787,-84.445239,1.585)); +#193322 = VECTOR('',#193323,1.); +#193323 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#193324 = ORIENTED_EDGE('',*,*,#193325,.T.); +#193325 = EDGE_CURVE('',#193318,#193326,#193328,.T.); +#193326 = VERTEX_POINT('',#193327); +#193327 = CARTESIAN_POINT('',(112.416126,-84.326557,1.585)); +#193328 = LINE('',#193329,#193330); +#193329 = CARTESIAN_POINT('',(112.47889,-84.388291,1.585)); +#193330 = VECTOR('',#193331,1.); +#193331 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#193332 = ORIENTED_EDGE('',*,*,#193333,.T.); +#193333 = EDGE_CURVE('',#193326,#193334,#193336,.T.); +#193334 = VERTEX_POINT('',#193335); +#193335 = CARTESIAN_POINT('',(112.350329,-84.356478,1.585)); +#193336 = LINE('',#193337,#193338); +#193337 = CARTESIAN_POINT('',(112.416126,-84.326557,1.585)); +#193338 = VECTOR('',#193339,1.); +#193339 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#193340 = ORIENTED_EDGE('',*,*,#193341,.T.); +#193341 = EDGE_CURVE('',#193334,#193342,#193344,.T.); +#193342 = VERTEX_POINT('',#193343); +#193343 = CARTESIAN_POINT('',(112.125411,-84.355256,1.585)); +#193344 = LINE('',#193345,#193346); +#193345 = CARTESIAN_POINT('',(112.350329,-84.356478,1.585)); +#193346 = VECTOR('',#193347,1.); +#193347 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#193348 = ORIENTED_EDGE('',*,*,#193349,.T.); +#193349 = EDGE_CURVE('',#193342,#193350,#193352,.T.); +#193350 = VERTEX_POINT('',#193351); +#193351 = CARTESIAN_POINT('',(112.0027,-84.293053,1.585)); +#193352 = LINE('',#193353,#193354); +#193353 = CARTESIAN_POINT('',(112.125411,-84.355256,1.585)); +#193354 = VECTOR('',#193355,1.); +#193355 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#193356 = ORIENTED_EDGE('',*,*,#193357,.T.); +#193357 = EDGE_CURVE('',#193350,#193358,#193360,.T.); +#193358 = VERTEX_POINT('',#193359); +#193359 = CARTESIAN_POINT('',(111.892384,-84.181728,1.585)); +#193360 = LINE('',#193361,#193362); +#193361 = CARTESIAN_POINT('',(112.0027,-84.293053,1.585)); +#193362 = VECTOR('',#193363,1.); +#193363 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#193364 = ORIENTED_EDGE('',*,*,#193365,.T.); +#193365 = EDGE_CURVE('',#193358,#193366,#193368,.T.); +#193366 = VERTEX_POINT('',#193367); +#193367 = CARTESIAN_POINT('',(111.881984,-84.158251,1.585)); +#193368 = LINE('',#193369,#193370); +#193369 = CARTESIAN_POINT('',(111.892384,-84.181728,1.585)); +#193370 = VECTOR('',#193371,1.); +#193371 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#193372 = ORIENTED_EDGE('',*,*,#193373,.T.); +#193373 = EDGE_CURVE('',#193366,#193374,#193376,.T.); +#193374 = VERTEX_POINT('',#193375); +#193375 = CARTESIAN_POINT('',(111.832126,-83.949585,1.585)); +#193376 = LINE('',#193377,#193378); +#193377 = CARTESIAN_POINT('',(111.881984,-84.158251,1.585)); +#193378 = VECTOR('',#193379,1.); +#193379 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#193380 = ORIENTED_EDGE('',*,*,#193381,.T.); +#193381 = EDGE_CURVE('',#193374,#193382,#193384,.T.); +#193382 = VERTEX_POINT('',#193383); +#193383 = CARTESIAN_POINT('',(111.834365,-83.598062,1.585)); +#193384 = LINE('',#193385,#193386); +#193385 = CARTESIAN_POINT('',(111.832126,-83.949585,1.585)); +#193386 = VECTOR('',#193387,1.); +#193387 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#193388 = ORIENTED_EDGE('',*,*,#193389,.T.); +#193389 = EDGE_CURVE('',#193382,#193390,#193392,.T.); +#193390 = VERTEX_POINT('',#193391); +#193391 = CARTESIAN_POINT('',(111.886931,-83.39374,1.585)); +#193392 = LINE('',#193393,#193394); +#193393 = CARTESIAN_POINT('',(111.834365,-83.598062,1.585)); +#193394 = VECTOR('',#193395,1.); +#193395 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#193396 = ORIENTED_EDGE('',*,*,#193397,.T.); +#193397 = EDGE_CURVE('',#193390,#193398,#193400,.T.); +#193398 = VERTEX_POINT('',#193399); +#193399 = CARTESIAN_POINT('',(111.901712,-83.372743,1.585)); +#193400 = LINE('',#193401,#193402); +#193401 = CARTESIAN_POINT('',(111.886931,-83.39374,1.585)); +#193402 = VECTOR('',#193403,1.); +#193403 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#193404 = ORIENTED_EDGE('',*,*,#193405,.T.); +#193405 = EDGE_CURVE('',#193398,#193226,#193406,.T.); +#193406 = LINE('',#193407,#193408); +#193407 = CARTESIAN_POINT('',(111.901712,-83.372743,1.585)); +#193408 = VECTOR('',#193409,1.); +#193409 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#193410 = FACE_BOUND('',#193411,.F.); +#193411 = EDGE_LOOP('',(#193412,#193423,#193431,#193440,#193448,#193456, + #193464,#193472,#193480,#193488,#193497,#193505,#193513,#193521, + #193529,#193538)); +#193412 = ORIENTED_EDGE('',*,*,#193413,.T.); +#193413 = EDGE_CURVE('',#193414,#193416,#193418,.T.); +#193414 = VERTEX_POINT('',#193415); +#193415 = CARTESIAN_POINT('',(112.386508,-83.392177,1.585)); +#193416 = VERTEX_POINT('',#193417); +#193417 = CARTESIAN_POINT('',(112.09441,-83.392177,1.585)); +#193418 = CIRCLE('',#193419,0.252889603602); +#193419 = AXIS2_PLACEMENT_3D('',#193420,#193421,#193422); +#193420 = CARTESIAN_POINT('',(112.240459,-83.59863,1.585)); +#193421 = DIRECTION('',(0.,0.,1.)); +#193422 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#193423 = ORIENTED_EDGE('',*,*,#193424,.T.); +#193424 = EDGE_CURVE('',#193416,#193425,#193427,.T.); +#193425 = VERTEX_POINT('',#193426); +#193426 = CARTESIAN_POINT('',(112.022467,-83.464119,1.585)); +#193427 = LINE('',#193428,#193429); +#193428 = CARTESIAN_POINT('',(112.09441,-83.392177,1.585)); +#193429 = VECTOR('',#193430,1.); +#193430 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#193431 = ORIENTED_EDGE('',*,*,#193432,.T.); +#193432 = EDGE_CURVE('',#193425,#193433,#193435,.T.); +#193433 = VERTEX_POINT('',#193434); +#193434 = CARTESIAN_POINT('',(112.022467,-84.101717,1.585)); +#193435 = CIRCLE('',#193436,0.985308713638); +#193436 = AXIS2_PLACEMENT_3D('',#193437,#193438,#193439); +#193437 = CARTESIAN_POINT('',(112.9547762077,-83.782918,1.585)); +#193438 = DIRECTION('',(0.,0.,1.)); +#193439 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#193440 = ORIENTED_EDGE('',*,*,#193441,.T.); +#193441 = EDGE_CURVE('',#193433,#193442,#193444,.T.); +#193442 = VERTEX_POINT('',#193443); +#193443 = CARTESIAN_POINT('',(112.09441,-84.173661,1.585)); +#193444 = LINE('',#193445,#193446); +#193445 = CARTESIAN_POINT('',(112.022467,-84.101717,1.585)); +#193446 = VECTOR('',#193447,1.); +#193447 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#193448 = ORIENTED_EDGE('',*,*,#193449,.T.); +#193449 = EDGE_CURVE('',#193442,#193450,#193452,.T.); +#193450 = VERTEX_POINT('',#193451); +#193451 = CARTESIAN_POINT('',(112.162926,-84.207919,1.585)); +#193452 = LINE('',#193453,#193454); +#193453 = CARTESIAN_POINT('',(112.09441,-84.173661,1.585)); +#193454 = VECTOR('',#193455,1.); +#193455 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#193456 = ORIENTED_EDGE('',*,*,#193457,.T.); +#193457 = EDGE_CURVE('',#193450,#193458,#193460,.T.); +#193458 = VERTEX_POINT('',#193459); +#193459 = CARTESIAN_POINT('',(112.297489,-84.207919,1.585)); +#193460 = LINE('',#193461,#193462); +#193461 = CARTESIAN_POINT('',(112.162926,-84.207919,1.585)); +#193462 = VECTOR('',#193463,1.); +#193463 = DIRECTION('',(1.,0.,0.)); +#193464 = ORIENTED_EDGE('',*,*,#193465,.T.); +#193465 = EDGE_CURVE('',#193458,#193466,#193468,.T.); +#193466 = VERTEX_POINT('',#193467); +#193467 = CARTESIAN_POINT('',(112.24365,-84.15408,1.585)); +#193468 = LINE('',#193469,#193470); +#193469 = CARTESIAN_POINT('',(112.297489,-84.207919,1.585)); +#193470 = VECTOR('',#193471,1.); +#193471 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#193472 = ORIENTED_EDGE('',*,*,#193473,.T.); +#193473 = EDGE_CURVE('',#193466,#193474,#193476,.T.); +#193474 = VERTEX_POINT('',#193475); +#193475 = CARTESIAN_POINT('',(112.175135,-84.119823,1.585)); +#193476 = LINE('',#193477,#193478); +#193477 = CARTESIAN_POINT('',(112.24365,-84.15408,1.585)); +#193478 = VECTOR('',#193479,1.); +#193479 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#193480 = ORIENTED_EDGE('',*,*,#193481,.T.); +#193481 = EDGE_CURVE('',#193474,#193482,#193484,.T.); +#193482 = VERTEX_POINT('',#193483); +#193483 = CARTESIAN_POINT('',(112.08297,-84.118382,1.585)); +#193484 = LINE('',#193485,#193486); +#193485 = CARTESIAN_POINT('',(112.175135,-84.119823,1.585)); +#193486 = VECTOR('',#193487,1.); +#193487 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#193488 = ORIENTED_EDGE('',*,*,#193489,.T.); +#193489 = EDGE_CURVE('',#193482,#193490,#193492,.T.); +#193490 = VERTEX_POINT('',#193491); +#193491 = CARTESIAN_POINT('',(112.097602,-83.969823,1.585)); +#193492 = CIRCLE('',#193493,7.500006711464E-02); +#193493 = AXIS2_PLACEMENT_3D('',#193494,#193495,#193496); +#193494 = CARTESIAN_POINT('',(112.09760193288,-84.04482306711,1.585)); +#193495 = DIRECTION('',(0.,0.,-1.)); +#193496 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#193497 = ORIENTED_EDGE('',*,*,#193498,.T.); +#193498 = EDGE_CURVE('',#193490,#193499,#193501,.T.); +#193499 = VERTEX_POINT('',#193500); +#193500 = CARTESIAN_POINT('',(112.212649,-83.972486,1.585)); +#193501 = LINE('',#193502,#193503); +#193502 = CARTESIAN_POINT('',(112.097602,-83.969823,1.585)); +#193503 = VECTOR('',#193504,1.); +#193504 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#193505 = ORIENTED_EDGE('',*,*,#193506,.T.); +#193506 = EDGE_CURVE('',#193499,#193507,#193509,.T.); +#193507 = VERTEX_POINT('',#193508); +#193508 = CARTESIAN_POINT('',(112.335361,-84.03469,1.585)); +#193509 = LINE('',#193510,#193511); +#193510 = CARTESIAN_POINT('',(112.212649,-83.972486,1.585)); +#193511 = VECTOR('',#193512,1.); +#193512 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#193513 = ORIENTED_EDGE('',*,*,#193514,.T.); +#193514 = EDGE_CURVE('',#193507,#193515,#193517,.T.); +#193515 = VERTEX_POINT('',#193516); +#193516 = CARTESIAN_POINT('',(112.430934,-84.129233,1.585)); +#193517 = LINE('',#193518,#193519); +#193518 = CARTESIAN_POINT('',(112.335361,-84.03469,1.585)); +#193519 = VECTOR('',#193520,1.); +#193520 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#193521 = ORIENTED_EDGE('',*,*,#193522,.T.); +#193522 = EDGE_CURVE('',#193515,#193523,#193525,.T.); +#193523 = VERTEX_POINT('',#193524); +#193524 = CARTESIAN_POINT('',(112.45845,-84.101717,1.585)); +#193525 = LINE('',#193526,#193527); +#193526 = CARTESIAN_POINT('',(112.430934,-84.129233,1.585)); +#193527 = VECTOR('',#193528,1.); +#193528 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#193529 = ORIENTED_EDGE('',*,*,#193530,.T.); +#193530 = EDGE_CURVE('',#193523,#193531,#193533,.T.); +#193531 = VERTEX_POINT('',#193532); +#193532 = CARTESIAN_POINT('',(112.45845,-83.464119,1.585)); +#193533 = CIRCLE('',#193534,0.985282207896); +#193534 = AXIS2_PLACEMENT_3D('',#193535,#193536,#193537); +#193535 = CARTESIAN_POINT('',(111.52616880486,-83.782918,1.585)); +#193536 = DIRECTION('',(0.,-0.,1.)); +#193537 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#193538 = ORIENTED_EDGE('',*,*,#193539,.T.); +#193539 = EDGE_CURVE('',#193531,#193414,#193540,.T.); +#193540 = LINE('',#193541,#193542); +#193541 = CARTESIAN_POINT('',(112.45845,-83.464119,1.585)); +#193542 = VECTOR('',#193543,1.); +#193543 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193544 = PLANE('',#193545); +#193545 = AXIS2_PLACEMENT_3D('',#193546,#193547,#193548); +#193546 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193547 = DIRECTION('',(0.,0.,1.)); +#193548 = DIRECTION('',(1.,0.,-0.)); +#193549 = SHELL_BASED_SURFACE_MODEL('',(#193550)); +#193550 = OPEN_SHELL('',(#193551)); +#193551 = ADVANCED_FACE('',(#193552),#193661,.T.); +#193552 = FACE_BOUND('',#193553,.F.); +#193553 = EDGE_LOOP('',(#193554,#193565,#193573,#193582,#193590,#193598, + #193606,#193614,#193622,#193630,#193638,#193646,#193655)); +#193554 = ORIENTED_EDGE('',*,*,#193555,.T.); +#193555 = EDGE_CURVE('',#193556,#193558,#193560,.T.); +#193556 = VERTEX_POINT('',#193557); +#193557 = CARTESIAN_POINT('',(92.77165,-82.3231,1.585)); +#193558 = VERTEX_POINT('',#193559); +#193559 = CARTESIAN_POINT('',(92.83165,-82.2631,1.585)); +#193560 = CIRCLE('',#193561,5.999932016264E-02); +#193561 = AXIS2_PLACEMENT_3D('',#193562,#193563,#193564); +#193562 = CARTESIAN_POINT('',(92.831649320159,-82.32309932015,1.585)); +#193563 = DIRECTION('',(0.,0.,-1.)); +#193564 = DIRECTION('',(-0.999999999936,-1.133081517402E-05,-0.)); +#193565 = ORIENTED_EDGE('',*,*,#193566,.T.); +#193566 = EDGE_CURVE('',#193558,#193567,#193569,.T.); +#193567 = VERTEX_POINT('',#193568); +#193568 = CARTESIAN_POINT('',(96.84165,-82.2631,1.585)); +#193569 = LINE('',#193570,#193571); +#193570 = CARTESIAN_POINT('',(92.83165,-82.2631,1.585)); +#193571 = VECTOR('',#193572,1.); +#193572 = DIRECTION('',(1.,0.,0.)); +#193573 = ORIENTED_EDGE('',*,*,#193574,.T.); +#193574 = EDGE_CURVE('',#193567,#193575,#193577,.T.); +#193575 = VERTEX_POINT('',#193576); +#193576 = CARTESIAN_POINT('',(96.84165,-82.3831,1.585)); +#193577 = CIRCLE('',#193578,6.000000000043E-02); +#193578 = AXIS2_PLACEMENT_3D('',#193579,#193580,#193581); +#193579 = CARTESIAN_POINT('',(96.841650225588,-82.3231,1.585)); +#193580 = DIRECTION('',(0.,0.,-1.)); +#193581 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#193582 = ORIENTED_EDGE('',*,*,#193583,.T.); +#193583 = EDGE_CURVE('',#193575,#193584,#193586,.T.); +#193584 = VERTEX_POINT('',#193585); +#193585 = CARTESIAN_POINT('',(92.89165,-82.3831,1.585)); +#193586 = LINE('',#193587,#193588); +#193587 = CARTESIAN_POINT('',(96.84165,-82.3831,1.585)); +#193588 = VECTOR('',#193589,1.); +#193589 = DIRECTION('',(-1.,0.,0.)); +#193590 = ORIENTED_EDGE('',*,*,#193591,.T.); +#193591 = EDGE_CURVE('',#193584,#193592,#193594,.T.); +#193592 = VERTEX_POINT('',#193593); +#193593 = CARTESIAN_POINT('',(92.89165,-84.2631,1.585)); +#193594 = LINE('',#193595,#193596); +#193595 = CARTESIAN_POINT('',(92.89165,-82.3831,1.585)); +#193596 = VECTOR('',#193597,1.); +#193597 = DIRECTION('',(0.,-1.,0.)); +#193598 = ORIENTED_EDGE('',*,*,#193599,.T.); +#193599 = EDGE_CURVE('',#193592,#193600,#193602,.T.); +#193600 = VERTEX_POINT('',#193601); +#193601 = CARTESIAN_POINT('',(94.099081,-84.2631,1.585)); +#193602 = LINE('',#193603,#193604); +#193603 = CARTESIAN_POINT('',(92.89165,-84.2631,1.585)); +#193604 = VECTOR('',#193605,1.); +#193605 = DIRECTION('',(1.,0.,0.)); +#193606 = ORIENTED_EDGE('',*,*,#193607,.T.); +#193607 = EDGE_CURVE('',#193600,#193608,#193610,.T.); +#193608 = VERTEX_POINT('',#193609); +#193609 = CARTESIAN_POINT('',(94.065814,-84.27688,1.585)); +#193610 = LINE('',#193611,#193612); +#193611 = CARTESIAN_POINT('',(94.099081,-84.2631,1.585)); +#193612 = VECTOR('',#193613,1.); +#193613 = DIRECTION('',(-0.923876023059,-0.382691904823,0.)); +#193614 = ORIENTED_EDGE('',*,*,#193615,.T.); +#193615 = EDGE_CURVE('',#193608,#193616,#193618,.T.); +#193616 = VERTEX_POINT('',#193617); +#193617 = CARTESIAN_POINT('',(94.02443,-84.318264,1.585)); +#193618 = LINE('',#193619,#193620); +#193619 = CARTESIAN_POINT('',(94.065814,-84.27688,1.585)); +#193620 = VECTOR('',#193621,1.); +#193621 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#193622 = ORIENTED_EDGE('',*,*,#193623,.T.); +#193623 = EDGE_CURVE('',#193616,#193624,#193626,.T.); +#193624 = VERTEX_POINT('',#193625); +#193625 = CARTESIAN_POINT('',(94.002032,-84.372336,1.585)); +#193626 = LINE('',#193627,#193628); +#193627 = CARTESIAN_POINT('',(94.02443,-84.318264,1.585)); +#193628 = VECTOR('',#193629,1.); +#193629 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193630 = ORIENTED_EDGE('',*,*,#193631,.T.); +#193631 = EDGE_CURVE('',#193624,#193632,#193634,.T.); +#193632 = VERTEX_POINT('',#193633); +#193633 = CARTESIAN_POINT('',(94.002032,-84.3831,1.585)); +#193634 = LINE('',#193635,#193636); +#193635 = CARTESIAN_POINT('',(94.002032,-84.372336,1.585)); +#193636 = VECTOR('',#193637,1.); +#193637 = DIRECTION('',(0.,-1.,0.)); +#193638 = ORIENTED_EDGE('',*,*,#193639,.T.); +#193639 = EDGE_CURVE('',#193632,#193640,#193642,.T.); +#193640 = VERTEX_POINT('',#193641); +#193641 = CARTESIAN_POINT('',(92.83165,-84.3831,1.585)); +#193642 = LINE('',#193643,#193644); +#193643 = CARTESIAN_POINT('',(94.002032,-84.3831,1.585)); +#193644 = VECTOR('',#193645,1.); +#193645 = DIRECTION('',(-1.,0.,0.)); +#193646 = ORIENTED_EDGE('',*,*,#193647,.T.); +#193647 = EDGE_CURVE('',#193640,#193648,#193650,.T.); +#193648 = VERTEX_POINT('',#193649); +#193649 = CARTESIAN_POINT('',(92.77165,-84.3231,1.585)); +#193650 = CIRCLE('',#193651,5.999932016259E-02); +#193651 = AXIS2_PLACEMENT_3D('',#193652,#193653,#193654); +#193652 = CARTESIAN_POINT('',(92.831649320159,-84.32310067984,1.585)); +#193653 = DIRECTION('',(0.,0.,-1.)); +#193654 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#193655 = ORIENTED_EDGE('',*,*,#193656,.T.); +#193656 = EDGE_CURVE('',#193648,#193556,#193657,.T.); +#193657 = LINE('',#193658,#193659); +#193658 = CARTESIAN_POINT('',(92.77165,-84.3231,1.585)); +#193659 = VECTOR('',#193660,1.); +#193660 = DIRECTION('',(0.,1.,0.)); +#193661 = PLANE('',#193662); +#193662 = AXIS2_PLACEMENT_3D('',#193663,#193664,#193665); +#193663 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193664 = DIRECTION('',(0.,0.,1.)); +#193665 = DIRECTION('',(1.,0.,-0.)); +#193666 = SHELL_BASED_SURFACE_MODEL('',(#193667)); +#193667 = OPEN_SHELL('',(#193668)); +#193668 = ADVANCED_FACE('',(#193669),#193728,.T.); +#193669 = FACE_BOUND('',#193670,.F.); +#193670 = EDGE_LOOP('',(#193671,#193681,#193689,#193698,#193706,#193714, + #193722)); +#193671 = ORIENTED_EDGE('',*,*,#193672,.T.); +#193672 = EDGE_CURVE('',#193673,#193675,#193677,.T.); +#193673 = VERTEX_POINT('',#193674); +#193674 = CARTESIAN_POINT('',(94.232486,-84.27688,1.585)); +#193675 = VERTEX_POINT('',#193676); +#193676 = CARTESIAN_POINT('',(94.199219,-84.2631,1.585)); +#193677 = LINE('',#193678,#193679); +#193678 = CARTESIAN_POINT('',(94.232486,-84.27688,1.585)); +#193679 = VECTOR('',#193680,1.); +#193680 = DIRECTION('',(-0.923876023059,0.382691904823,0.)); +#193681 = ORIENTED_EDGE('',*,*,#193682,.T.); +#193682 = EDGE_CURVE('',#193675,#193683,#193685,.T.); +#193683 = VERTEX_POINT('',#193684); +#193684 = CARTESIAN_POINT('',(96.84165,-84.2631,1.585)); +#193685 = LINE('',#193686,#193687); +#193686 = CARTESIAN_POINT('',(94.199219,-84.2631,1.585)); +#193687 = VECTOR('',#193688,1.); +#193688 = DIRECTION('',(1.,0.,0.)); +#193689 = ORIENTED_EDGE('',*,*,#193690,.T.); +#193690 = EDGE_CURVE('',#193683,#193691,#193693,.T.); +#193691 = VERTEX_POINT('',#193692); +#193692 = CARTESIAN_POINT('',(96.84165,-84.3831,1.585)); +#193693 = CIRCLE('',#193694,6.000000000043E-02); +#193694 = AXIS2_PLACEMENT_3D('',#193695,#193696,#193697); +#193695 = CARTESIAN_POINT('',(96.841650225588,-84.3231,1.585)); +#193696 = DIRECTION('',(0.,0.,-1.)); +#193697 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#193698 = ORIENTED_EDGE('',*,*,#193699,.T.); +#193699 = EDGE_CURVE('',#193691,#193700,#193702,.T.); +#193700 = VERTEX_POINT('',#193701); +#193701 = CARTESIAN_POINT('',(94.296268,-84.3831,1.585)); +#193702 = LINE('',#193703,#193704); +#193703 = CARTESIAN_POINT('',(96.84165,-84.3831,1.585)); +#193704 = VECTOR('',#193705,1.); +#193705 = DIRECTION('',(-1.,0.,0.)); +#193706 = ORIENTED_EDGE('',*,*,#193707,.T.); +#193707 = EDGE_CURVE('',#193700,#193708,#193710,.T.); +#193708 = VERTEX_POINT('',#193709); +#193709 = CARTESIAN_POINT('',(94.296268,-84.372336,1.585)); +#193710 = LINE('',#193711,#193712); +#193711 = CARTESIAN_POINT('',(94.296268,-84.3831,1.585)); +#193712 = VECTOR('',#193713,1.); +#193713 = DIRECTION('',(0.,1.,0.)); +#193714 = ORIENTED_EDGE('',*,*,#193715,.T.); +#193715 = EDGE_CURVE('',#193708,#193716,#193718,.T.); +#193716 = VERTEX_POINT('',#193717); +#193717 = CARTESIAN_POINT('',(94.27387,-84.318264,1.585)); +#193718 = LINE('',#193719,#193720); +#193719 = CARTESIAN_POINT('',(94.296268,-84.372336,1.585)); +#193720 = VECTOR('',#193721,1.); +#193721 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#193722 = ORIENTED_EDGE('',*,*,#193723,.T.); +#193723 = EDGE_CURVE('',#193716,#193673,#193724,.T.); +#193724 = LINE('',#193725,#193726); +#193725 = CARTESIAN_POINT('',(94.27387,-84.318264,1.585)); +#193726 = VECTOR('',#193727,1.); +#193727 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#193728 = PLANE('',#193729); +#193729 = AXIS2_PLACEMENT_3D('',#193730,#193731,#193732); +#193730 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193731 = DIRECTION('',(0.,0.,1.)); +#193732 = DIRECTION('',(1.,0.,-0.)); +#193733 = SHELL_BASED_SURFACE_MODEL('',(#193734)); +#193734 = OPEN_SHELL('',(#193735)); +#193735 = ADVANCED_FACE('',(#193736),#193797,.T.); +#193736 = FACE_BOUND('',#193737,.F.); +#193737 = EDGE_LOOP('',(#193738,#193749,#193757,#193766,#193774,#193783, + #193791)); +#193738 = ORIENTED_EDGE('',*,*,#193739,.T.); +#193739 = EDGE_CURVE('',#193740,#193742,#193744,.T.); +#193740 = VERTEX_POINT('',#193741); +#193741 = CARTESIAN_POINT('',(112.892494,-83.356478,1.585)); +#193742 = VERTEX_POINT('',#193743); +#193743 = CARTESIAN_POINT('',(112.907126,-83.207919,1.585)); +#193744 = CIRCLE('',#193745,7.500006711464E-02); +#193745 = AXIS2_PLACEMENT_3D('',#193746,#193747,#193748); +#193746 = CARTESIAN_POINT('',(112.90712593288,-83.28291906711,1.585)); +#193747 = DIRECTION('',(0.,0.,-1.)); +#193748 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#193749 = ORIENTED_EDGE('',*,*,#193750,.T.); +#193750 = EDGE_CURVE('',#193742,#193751,#193753,.T.); +#193751 = VERTEX_POINT('',#193752); +#193752 = CARTESIAN_POINT('',(113.588424,-83.20936,1.585)); +#193753 = LINE('',#193754,#193755); +#193754 = CARTESIAN_POINT('',(112.907126,-83.207919,1.585)); +#193755 = VECTOR('',#193756,1.); +#193756 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#193757 = ORIENTED_EDGE('',*,*,#193758,.T.); +#193758 = EDGE_CURVE('',#193751,#193759,#193761,.T.); +#193759 = VERTEX_POINT('',#193760); +#193760 = CARTESIAN_POINT('',(113.642728,-83.312463,1.585)); +#193761 = CIRCLE('',#193762,7.500015546833E-02); +#193762 = AXIS2_PLACEMENT_3D('',#193763,#193764,#193765); +#193763 = CARTESIAN_POINT('',(113.57379197422,-83.28291900449,1.585)); +#193764 = DIRECTION('',(0.,0.,-1.)); +#193765 = DIRECTION('',(0.195093272598,0.980784693491,0.)); +#193766 = ORIENTED_EDGE('',*,*,#193767,.T.); +#193767 = EDGE_CURVE('',#193759,#193768,#193770,.T.); +#193768 = VERTEX_POINT('',#193769); +#193769 = CARTESIAN_POINT('',(113.207069,-84.325344,1.585)); +#193770 = LINE('',#193771,#193772); +#193771 = CARTESIAN_POINT('',(113.642728,-83.312463,1.585)); +#193772 = VECTOR('',#193773,1.); +#193773 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#193774 = ORIENTED_EDGE('',*,*,#193775,.T.); +#193775 = EDGE_CURVE('',#193768,#193776,#193778,.T.); +#193776 = VERTEX_POINT('',#193777); +#193777 = CARTESIAN_POINT('',(113.076285,-84.253375,1.585)); +#193778 = CIRCLE('',#193779,7.500030178421E-02); +#193779 = AXIS2_PLACEMENT_3D('',#193780,#193781,#193782); +#193780 = CARTESIAN_POINT('',(113.14522134698,-84.28291861745,1.585)); +#193781 = DIRECTION('',(-0.,0.,-1.)); +#193782 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#193783 = ORIENTED_EDGE('',*,*,#193784,.T.); +#193784 = EDGE_CURVE('',#193776,#193785,#193787,.T.); +#193785 = VERTEX_POINT('',#193786); +#193786 = CARTESIAN_POINT('',(113.460051,-83.357919,1.585)); +#193787 = LINE('',#193788,#193789); +#193788 = CARTESIAN_POINT('',(113.076285,-84.253375,1.585)); +#193789 = VECTOR('',#193790,1.); +#193790 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#193791 = ORIENTED_EDGE('',*,*,#193792,.T.); +#193792 = EDGE_CURVE('',#193785,#193740,#193793,.T.); +#193793 = LINE('',#193794,#193795); +#193794 = CARTESIAN_POINT('',(113.460051,-83.357919,1.585)); +#193795 = VECTOR('',#193796,1.); +#193796 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#193797 = PLANE('',#193798); +#193798 = AXIS2_PLACEMENT_3D('',#193799,#193800,#193801); +#193799 = CARTESIAN_POINT('',(0.,0.,1.585)); +#193800 = DIRECTION('',(0.,0.,1.)); +#193801 = DIRECTION('',(1.,0.,-0.)); +#193802 = SHELL_BASED_SURFACE_MODEL('',(#193803)); +#193803 = OPEN_SHELL('',(#193804)); +#193804 = ADVANCED_FACE('',(#193805,#193939),#193998,.T.); +#193805 = FACE_BOUND('',#193806,.F.); +#193806 = EDGE_LOOP('',(#193807,#193818,#193826,#193834,#193842,#193850, + #193858,#193867,#193875,#193883,#193891,#193900,#193908,#193917, + #193925,#193933)); +#193807 = ORIENTED_EDGE('',*,*,#193808,.T.); +#193808 = EDGE_CURVE('',#193809,#193811,#193813,.T.); +#193809 = VERTEX_POINT('',#193810); +#193810 = CARTESIAN_POINT('',(150.608013,-83.733961,1.585)); +#193811 = VERTEX_POINT('',#193812); +#193812 = CARTESIAN_POINT('',(150.888666,-83.684718,1.585)); +#193813 = CIRCLE('',#193814,0.327183487819); +#193814 = AXIS2_PLACEMENT_3D('',#193815,#193816,#193817); +#193815 = CARTESIAN_POINT('',(150.79924076591,-83.99944353472,1.585)); +#193816 = DIRECTION('',(0.,0.,-1.)); +#193817 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#193818 = ORIENTED_EDGE('',*,*,#193819,.T.); +#193819 = EDGE_CURVE('',#193811,#193820,#193822,.T.); +#193820 = VERTEX_POINT('',#193821); +#193821 = CARTESIAN_POINT('',(150.991273,-83.739751,1.585)); +#193822 = LINE('',#193823,#193824); +#193823 = CARTESIAN_POINT('',(150.888666,-83.684718,1.585)); +#193824 = VECTOR('',#193825,1.); +#193825 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#193826 = ORIENTED_EDGE('',*,*,#193827,.T.); +#193827 = EDGE_CURVE('',#193820,#193828,#193830,.T.); +#193828 = VERTEX_POINT('',#193829); +#193829 = CARTESIAN_POINT('',(151.046306,-83.799501,1.585)); +#193830 = LINE('',#193831,#193832); +#193831 = CARTESIAN_POINT('',(150.991273,-83.739751,1.585)); +#193832 = VECTOR('',#193833,1.); +#193833 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#193834 = ORIENTED_EDGE('',*,*,#193835,.T.); +#193835 = EDGE_CURVE('',#193828,#193836,#193838,.T.); +#193836 = VERTEX_POINT('',#193837); +#193837 = CARTESIAN_POINT('',(151.093109,-83.899628,1.585)); +#193838 = LINE('',#193839,#193840); +#193839 = CARTESIAN_POINT('',(151.046306,-83.799501,1.585)); +#193840 = VECTOR('',#193841,1.); +#193841 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#193842 = ORIENTED_EDGE('',*,*,#193843,.T.); +#193843 = EDGE_CURVE('',#193836,#193844,#193846,.T.); +#193844 = VERTEX_POINT('',#193845); +#193845 = CARTESIAN_POINT('',(151.096025,-83.918013,1.585)); +#193846 = LINE('',#193847,#193848); +#193847 = CARTESIAN_POINT('',(151.093109,-83.899628,1.585)); +#193848 = VECTOR('',#193849,1.); +#193849 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#193850 = ORIENTED_EDGE('',*,*,#193851,.T.); +#193851 = EDGE_CURVE('',#193844,#193852,#193854,.T.); +#193852 = VERTEX_POINT('',#193853); +#193853 = CARTESIAN_POINT('',(151.422322,-83.689606,1.585)); +#193854 = LINE('',#193855,#193856); +#193855 = CARTESIAN_POINT('',(151.096025,-83.918013,1.585)); +#193856 = VECTOR('',#193857,1.); +#193857 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#193858 = ORIENTED_EDGE('',*,*,#193859,.T.); +#193859 = EDGE_CURVE('',#193852,#193860,#193862,.T.); +#193860 = VERTEX_POINT('',#193861); +#193861 = CARTESIAN_POINT('',(151.496872,-83.796106,1.585)); +#193862 = CIRCLE('',#193863,6.499990865384E-02); +#193863 = AXIS2_PLACEMENT_3D('',#193864,#193865,#193866); +#193864 = CARTESIAN_POINT('',(151.45959707222,-83.74285594944,1.585)); +#193865 = DIRECTION('',(0.,0.,-1.)); +#193866 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#193867 = ORIENTED_EDGE('',*,*,#193868,.T.); +#193868 = EDGE_CURVE('',#193860,#193869,#193871,.T.); +#193869 = VERTEX_POINT('',#193870); +#193870 = CARTESIAN_POINT('',(151.096025,-84.076698,1.585)); +#193871 = LINE('',#193872,#193873); +#193872 = CARTESIAN_POINT('',(151.496872,-83.796106,1.585)); +#193873 = VECTOR('',#193874,1.); +#193874 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#193875 = ORIENTED_EDGE('',*,*,#193876,.T.); +#193876 = EDGE_CURVE('',#193869,#193877,#193879,.T.); +#193877 = VERTEX_POINT('',#193878); +#193878 = CARTESIAN_POINT('',(151.096025,-84.192142,1.585)); +#193879 = LINE('',#193880,#193881); +#193880 = CARTESIAN_POINT('',(151.096025,-84.076698,1.585)); +#193881 = VECTOR('',#193882,1.); +#193882 = DIRECTION('',(0.,-1.,0.)); +#193883 = ORIENTED_EDGE('',*,*,#193884,.T.); +#193884 = EDGE_CURVE('',#193877,#193885,#193887,.T.); +#193885 = VERTEX_POINT('',#193886); +#193886 = CARTESIAN_POINT('',(151.459597,-84.192142,1.585)); +#193887 = LINE('',#193888,#193889); +#193888 = CARTESIAN_POINT('',(151.096025,-84.192142,1.585)); +#193889 = VECTOR('',#193890,1.); +#193890 = DIRECTION('',(1.,0.,0.)); +#193891 = ORIENTED_EDGE('',*,*,#193892,.T.); +#193892 = EDGE_CURVE('',#193885,#193893,#193895,.T.); +#193893 = VERTEX_POINT('',#193894); +#193894 = CARTESIAN_POINT('',(151.459597,-84.322142,1.585)); +#193895 = CIRCLE('',#193896,6.500000000092E-02); +#193896 = AXIS2_PLACEMENT_3D('',#193897,#193898,#193899); +#193897 = CARTESIAN_POINT('',(151.45959665513,-84.257142,1.585)); +#193898 = DIRECTION('',(0.,0.,-1.)); +#193899 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#193900 = ORIENTED_EDGE('',*,*,#193901,.T.); +#193901 = EDGE_CURVE('',#193893,#193902,#193904,.T.); +#193902 = VERTEX_POINT('',#193903); +#193903 = CARTESIAN_POINT('',(150.559597,-84.322142,1.585)); +#193904 = LINE('',#193905,#193906); +#193905 = CARTESIAN_POINT('',(151.459597,-84.322142,1.585)); +#193906 = VECTOR('',#193907,1.); +#193907 = DIRECTION('',(-1.,0.,0.)); +#193908 = ORIENTED_EDGE('',*,*,#193909,.T.); +#193909 = EDGE_CURVE('',#193902,#193910,#193912,.T.); +#193910 = VERTEX_POINT('',#193911); +#193911 = CARTESIAN_POINT('',(150.494597,-84.257142,1.585)); +#193912 = CIRCLE('',#193913,6.500103935392E-02); +#193913 = AXIS2_PLACEMENT_3D('',#193914,#193915,#193916); +#193914 = CARTESIAN_POINT('',(150.55959803934,-84.25714096065,1.585)); +#193915 = DIRECTION('',(0.,0.,-1.)); +#193916 = DIRECTION('',(-1.598967692944E-05,-0.999999999872,-0.)); +#193917 = ORIENTED_EDGE('',*,*,#193918,.T.); +#193918 = EDGE_CURVE('',#193910,#193919,#193921,.T.); +#193919 = VERTEX_POINT('',#193920); +#193920 = CARTESIAN_POINT('',(150.497512,-83.899628,1.585)); +#193921 = LINE('',#193922,#193923); +#193922 = CARTESIAN_POINT('',(150.494597,-84.257142,1.585)); +#193923 = VECTOR('',#193924,1.); +#193924 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#193925 = ORIENTED_EDGE('',*,*,#193926,.T.); +#193926 = EDGE_CURVE('',#193919,#193927,#193929,.T.); +#193927 = VERTEX_POINT('',#193928); +#193928 = CARTESIAN_POINT('',(150.550702,-83.791272,1.585)); +#193929 = LINE('',#193930,#193931); +#193930 = CARTESIAN_POINT('',(150.497512,-83.899628,1.585)); +#193931 = VECTOR('',#193932,1.); +#193932 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#193933 = ORIENTED_EDGE('',*,*,#193934,.T.); +#193934 = EDGE_CURVE('',#193927,#193809,#193935,.T.); +#193935 = LINE('',#193936,#193937); +#193936 = CARTESIAN_POINT('',(150.550702,-83.791272,1.585)); +#193937 = VECTOR('',#193938,1.); +#193938 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#193939 = FACE_BOUND('',#193940,.F.); +#193940 = EDGE_LOOP('',(#193941,#193952,#193960,#193968,#193976,#193984, + #193992)); +#193941 = ORIENTED_EDGE('',*,*,#193942,.T.); +#193942 = EDGE_CURVE('',#193943,#193945,#193947,.T.); +#193943 = VERTEX_POINT('',#193944); +#193944 = CARTESIAN_POINT('',(150.906808,-83.839134,1.585)); +#193945 = VERTEX_POINT('',#193946); +#193946 = CARTESIAN_POINT('',(150.655875,-83.867072,1.585)); +#193947 = CIRCLE('',#193948,0.180979134862); +#193948 = AXIS2_PLACEMENT_3D('',#193949,#193950,#193951); +#193949 = CARTESIAN_POINT('',(150.79569076987,-83.98198500078,1.585)); +#193950 = DIRECTION('',(0.,0.,1.)); +#193951 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#193952 = ORIENTED_EDGE('',*,*,#193953,.T.); +#193953 = EDGE_CURVE('',#193945,#193954,#193956,.T.); +#193954 = VERTEX_POINT('',#193955); +#193955 = CARTESIAN_POINT('',(150.624597,-83.929629,1.585)); +#193956 = LINE('',#193957,#193958); +#193957 = CARTESIAN_POINT('',(150.655875,-83.867072,1.585)); +#193958 = VECTOR('',#193959,1.); +#193959 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#193960 = ORIENTED_EDGE('',*,*,#193961,.T.); +#193961 = EDGE_CURVE('',#193954,#193962,#193964,.T.); +#193962 = VERTEX_POINT('',#193963); +#193963 = CARTESIAN_POINT('',(150.624597,-84.192142,1.585)); +#193964 = LINE('',#193965,#193966); +#193965 = CARTESIAN_POINT('',(150.624597,-83.929629,1.585)); +#193966 = VECTOR('',#193967,1.); +#193967 = DIRECTION('',(0.,-1.,0.)); +#193968 = ORIENTED_EDGE('',*,*,#193969,.T.); +#193969 = EDGE_CURVE('',#193962,#193970,#193972,.T.); +#193970 = VERTEX_POINT('',#193971); +#193971 = CARTESIAN_POINT('',(150.966025,-84.192142,1.585)); +#193972 = LINE('',#193973,#193974); +#193973 = CARTESIAN_POINT('',(150.624597,-84.192142,1.585)); +#193974 = VECTOR('',#193975,1.); +#193975 = DIRECTION('',(1.,0.,0.)); +#193976 = ORIENTED_EDGE('',*,*,#193977,.T.); +#193977 = EDGE_CURVE('',#193970,#193978,#193980,.T.); +#193978 = VERTEX_POINT('',#193979); +#193979 = CARTESIAN_POINT('',(150.966025,-83.929629,1.585)); +#193980 = LINE('',#193981,#193982); +#193981 = CARTESIAN_POINT('',(150.966025,-84.192142,1.585)); +#193982 = VECTOR('',#193983,1.); +#193983 = DIRECTION('',(0.,1.,0.)); +#193984 = ORIENTED_EDGE('',*,*,#193985,.T.); +#193985 = EDGE_CURVE('',#193978,#193986,#193988,.T.); +#193986 = VERTEX_POINT('',#193987); +#193987 = CARTESIAN_POINT('',(150.934746,-83.867072,1.585)); +#193988 = LINE('',#193989,#193990); +#193989 = CARTESIAN_POINT('',(150.966025,-83.929629,1.585)); +#193990 = VECTOR('',#193991,1.); +#193991 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#193992 = ORIENTED_EDGE('',*,*,#193993,.T.); +#193993 = EDGE_CURVE('',#193986,#193943,#193994,.T.); +#193994 = LINE('',#193995,#193996); +#193995 = CARTESIAN_POINT('',(150.934746,-83.867072,1.585)); +#193996 = VECTOR('',#193997,1.); +#193997 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#193998 = PLANE('',#193999); +#193999 = AXIS2_PLACEMENT_3D('',#194000,#194001,#194002); +#194000 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194001 = DIRECTION('',(0.,0.,1.)); +#194002 = DIRECTION('',(1.,0.,-0.)); +#194003 = SHELL_BASED_SURFACE_MODEL('',(#194004)); +#194004 = OPEN_SHELL('',(#194005)); +#194005 = ADVANCED_FACE('',(#194006),#194083,.T.); +#194006 = FACE_BOUND('',#194007,.F.); +#194007 = EDGE_LOOP('',(#194008,#194019,#194027,#194035,#194044,#194052, + #194060,#194069,#194077)); +#194008 = ORIENTED_EDGE('',*,*,#194009,.T.); +#194009 = EDGE_CURVE('',#194010,#194012,#194014,.T.); +#194010 = VERTEX_POINT('',#194011); +#194011 = CARTESIAN_POINT('',(147.749545,-83.639411,1.585)); +#194012 = VERTEX_POINT('',#194013); +#194013 = CARTESIAN_POINT('',(147.874597,-83.664285,1.585)); +#194014 = CIRCLE('',#194015,6.499988811647E-02); +#194015 = AXIS2_PLACEMENT_3D('',#194016,#194017,#194018); +#194016 = CARTESIAN_POINT('',(147.80959711188,-83.6642852701,1.585)); +#194017 = DIRECTION('',(0.,0.,-1.)); +#194018 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#194019 = ORIENTED_EDGE('',*,*,#194020,.T.); +#194020 = EDGE_CURVE('',#194012,#194021,#194023,.T.); +#194021 = VERTEX_POINT('',#194022); +#194022 = CARTESIAN_POINT('',(147.874597,-83.856427,1.585)); +#194023 = LINE('',#194024,#194025); +#194024 = CARTESIAN_POINT('',(147.874597,-83.664285,1.585)); +#194025 = VECTOR('',#194026,1.); +#194026 = DIRECTION('',(0.,-1.,0.)); +#194027 = ORIENTED_EDGE('',*,*,#194028,.T.); +#194028 = EDGE_CURVE('',#194021,#194029,#194031,.T.); +#194029 = VERTEX_POINT('',#194030); +#194030 = CARTESIAN_POINT('',(148.709597,-83.856427,1.585)); +#194031 = LINE('',#194032,#194033); +#194032 = CARTESIAN_POINT('',(147.874597,-83.856427,1.585)); +#194033 = VECTOR('',#194034,1.); +#194034 = DIRECTION('',(1.,0.,0.)); +#194035 = ORIENTED_EDGE('',*,*,#194036,.T.); +#194036 = EDGE_CURVE('',#194029,#194037,#194039,.T.); +#194037 = VERTEX_POINT('',#194038); +#194038 = CARTESIAN_POINT('',(148.709597,-83.986427,1.585)); +#194039 = CIRCLE('',#194040,6.500000000092E-02); +#194040 = AXIS2_PLACEMENT_3D('',#194041,#194042,#194043); +#194041 = CARTESIAN_POINT('',(148.70959665513,-83.921427,1.585)); +#194042 = DIRECTION('',(0.,0.,-1.)); +#194043 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#194044 = ORIENTED_EDGE('',*,*,#194045,.T.); +#194045 = EDGE_CURVE('',#194037,#194046,#194048,.T.); +#194046 = VERTEX_POINT('',#194047); +#194047 = CARTESIAN_POINT('',(147.874597,-83.986427,1.585)); +#194048 = LINE('',#194049,#194050); +#194049 = CARTESIAN_POINT('',(148.709597,-83.986427,1.585)); +#194050 = VECTOR('',#194051,1.); +#194051 = DIRECTION('',(-1.,0.,0.)); +#194052 = ORIENTED_EDGE('',*,*,#194053,.T.); +#194053 = EDGE_CURVE('',#194046,#194054,#194056,.T.); +#194054 = VERTEX_POINT('',#194055); +#194055 = CARTESIAN_POINT('',(147.874597,-84.17857,1.585)); +#194056 = LINE('',#194057,#194058); +#194057 = CARTESIAN_POINT('',(147.874597,-83.986427,1.585)); +#194058 = VECTOR('',#194059,1.); +#194059 = DIRECTION('',(0.,-1.,0.)); +#194060 = ORIENTED_EDGE('',*,*,#194061,.T.); +#194061 = EDGE_CURVE('',#194054,#194062,#194064,.T.); +#194062 = VERTEX_POINT('',#194063); +#194063 = CARTESIAN_POINT('',(147.744597,-84.17857,1.585)); +#194064 = CIRCLE('',#194065,6.500000000091E-02); +#194065 = AXIS2_PLACEMENT_3D('',#194066,#194067,#194068); +#194066 = CARTESIAN_POINT('',(147.809597,-84.17856965513,1.585)); +#194067 = DIRECTION('',(-0.,0.,-1.)); +#194068 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#194069 = ORIENTED_EDGE('',*,*,#194070,.T.); +#194070 = EDGE_CURVE('',#194062,#194071,#194073,.T.); +#194071 = VERTEX_POINT('',#194072); +#194072 = CARTESIAN_POINT('',(147.744597,-83.664285,1.585)); +#194073 = LINE('',#194074,#194075); +#194074 = CARTESIAN_POINT('',(147.744597,-84.17857,1.585)); +#194075 = VECTOR('',#194076,1.); +#194076 = DIRECTION('',(0.,1.,0.)); +#194077 = ORIENTED_EDGE('',*,*,#194078,.T.); +#194078 = EDGE_CURVE('',#194071,#194010,#194079,.T.); +#194079 = LINE('',#194080,#194081); +#194080 = CARTESIAN_POINT('',(147.744597,-83.664285,1.585)); +#194081 = VECTOR('',#194082,1.); +#194082 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#194083 = PLANE('',#194084); +#194084 = AXIS2_PLACEMENT_3D('',#194085,#194086,#194087); +#194085 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194086 = DIRECTION('',(0.,0.,1.)); +#194087 = DIRECTION('',(1.,0.,-0.)); +#194088 = SHELL_BASED_SURFACE_MODEL('',(#194089)); +#194089 = OPEN_SHELL('',(#194090)); +#194090 = ADVANCED_FACE('',(#194091),#194127,.T.); +#194091 = FACE_BOUND('',#194092,.F.); +#194092 = EDGE_LOOP('',(#194093,#194104,#194112,#194121)); +#194093 = ORIENTED_EDGE('',*,*,#194094,.T.); +#194094 = EDGE_CURVE('',#194095,#194097,#194099,.T.); +#194095 = VERTEX_POINT('',#194096); +#194096 = CARTESIAN_POINT('',(202.812742,-83.9875,1.585)); +#194097 = VERTEX_POINT('',#194098); +#194098 = CARTESIAN_POINT('',(202.812742,-83.8675,1.585)); +#194099 = CIRCLE('',#194100,6.000000000042E-02); +#194100 = AXIS2_PLACEMENT_3D('',#194101,#194102,#194103); +#194101 = CARTESIAN_POINT('',(202.81274177441,-83.9275,1.585)); +#194102 = DIRECTION('',(0.,0.,-1.)); +#194103 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#194104 = ORIENTED_EDGE('',*,*,#194105,.T.); +#194105 = EDGE_CURVE('',#194097,#194106,#194108,.T.); +#194106 = VERTEX_POINT('',#194107); +#194107 = CARTESIAN_POINT('',(203.287258,-83.8675,1.585)); +#194108 = LINE('',#194109,#194110); +#194109 = CARTESIAN_POINT('',(202.812742,-83.8675,1.585)); +#194110 = VECTOR('',#194111,1.); +#194111 = DIRECTION('',(1.,0.,0.)); +#194112 = ORIENTED_EDGE('',*,*,#194113,.T.); +#194113 = EDGE_CURVE('',#194106,#194114,#194116,.T.); +#194114 = VERTEX_POINT('',#194115); +#194115 = CARTESIAN_POINT('',(203.287258,-83.9875,1.585)); +#194116 = CIRCLE('',#194117,6.000000000042E-02); +#194117 = AXIS2_PLACEMENT_3D('',#194118,#194119,#194120); +#194118 = CARTESIAN_POINT('',(203.28725822558,-83.9275,1.585)); +#194119 = DIRECTION('',(0.,0.,-1.)); +#194120 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#194121 = ORIENTED_EDGE('',*,*,#194122,.T.); +#194122 = EDGE_CURVE('',#194114,#194095,#194123,.T.); +#194123 = LINE('',#194124,#194125); +#194124 = CARTESIAN_POINT('',(203.287258,-83.9875,1.585)); +#194125 = VECTOR('',#194126,1.); +#194126 = DIRECTION('',(-1.,0.,0.)); +#194127 = PLANE('',#194128); +#194128 = AXIS2_PLACEMENT_3D('',#194129,#194130,#194131); +#194129 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194130 = DIRECTION('',(0.,0.,1.)); +#194131 = DIRECTION('',(1.,0.,-0.)); +#194132 = SHELL_BASED_SURFACE_MODEL('',(#194133)); +#194133 = OPEN_SHELL('',(#194134)); +#194134 = ADVANCED_FACE('',(#194135),#194171,.T.); +#194135 = FACE_BOUND('',#194136,.F.); +#194136 = EDGE_LOOP('',(#194137,#194148,#194156,#194165)); +#194137 = ORIENTED_EDGE('',*,*,#194138,.T.); +#194138 = EDGE_CURVE('',#194139,#194141,#194143,.T.); +#194139 = VERTEX_POINT('',#194140); +#194140 = CARTESIAN_POINT('',(101.45107,-83.8931,1.585)); +#194141 = VERTEX_POINT('',#194142); +#194142 = CARTESIAN_POINT('',(101.45107,-83.7731,1.585)); +#194143 = CIRCLE('',#194144,6.000000000042E-02); +#194144 = AXIS2_PLACEMENT_3D('',#194145,#194146,#194147); +#194145 = CARTESIAN_POINT('',(101.45106977441,-83.8331,1.585)); +#194146 = DIRECTION('',(0.,0.,-1.)); +#194147 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#194148 = ORIENTED_EDGE('',*,*,#194149,.T.); +#194149 = EDGE_CURVE('',#194141,#194150,#194152,.T.); +#194150 = VERTEX_POINT('',#194151); +#194151 = CARTESIAN_POINT('',(101.73223,-83.7731,1.585)); +#194152 = LINE('',#194153,#194154); +#194153 = CARTESIAN_POINT('',(101.45107,-83.7731,1.585)); +#194154 = VECTOR('',#194155,1.); +#194155 = DIRECTION('',(1.,0.,0.)); +#194156 = ORIENTED_EDGE('',*,*,#194157,.T.); +#194157 = EDGE_CURVE('',#194150,#194158,#194160,.T.); +#194158 = VERTEX_POINT('',#194159); +#194159 = CARTESIAN_POINT('',(101.73223,-83.8931,1.585)); +#194160 = CIRCLE('',#194161,6.000000000042E-02); +#194161 = AXIS2_PLACEMENT_3D('',#194162,#194163,#194164); +#194162 = CARTESIAN_POINT('',(101.73223022558,-83.8331,1.585)); +#194163 = DIRECTION('',(0.,0.,-1.)); +#194164 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#194165 = ORIENTED_EDGE('',*,*,#194166,.T.); +#194166 = EDGE_CURVE('',#194158,#194139,#194167,.T.); +#194167 = LINE('',#194168,#194169); +#194168 = CARTESIAN_POINT('',(101.73223,-83.8931,1.585)); +#194169 = VECTOR('',#194170,1.); +#194170 = DIRECTION('',(-1.,0.,0.)); +#194171 = PLANE('',#194172); +#194172 = AXIS2_PLACEMENT_3D('',#194173,#194174,#194175); +#194173 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194174 = DIRECTION('',(0.,0.,1.)); +#194175 = DIRECTION('',(1.,0.,-0.)); +#194176 = SHELL_BASED_SURFACE_MODEL('',(#194177)); +#194177 = OPEN_SHELL('',(#194178)); +#194178 = ADVANCED_FACE('',(#194179,#194248),#194274,.T.); +#194179 = FACE_BOUND('',#194180,.F.); +#194180 = EDGE_LOOP('',(#194181,#194192,#194200,#194209,#194217,#194225, + #194233,#194242)); +#194181 = ORIENTED_EDGE('',*,*,#194182,.T.); +#194182 = EDGE_CURVE('',#194183,#194185,#194187,.T.); +#194183 = VERTEX_POINT('',#194184); +#194184 = CARTESIAN_POINT('',(85.387075,-82.614925,1.585)); +#194185 = VERTEX_POINT('',#194186); +#194186 = CARTESIAN_POINT('',(85.360224,-82.887541,1.585)); +#194187 = CIRCLE('',#194188,0.149999725371); +#194188 = AXIS2_PLACEMENT_3D('',#194189,#194190,#194191); +#194189 = CARTESIAN_POINT('',(85.312790061146,-82.74523871942,1.585)); +#194190 = DIRECTION('',(0.,0.,-1.)); +#194191 = DIRECTION('',(0.495233832397,0.868759720089,0.)); +#194192 = ORIENTED_EDGE('',*,*,#194193,.T.); +#194193 = EDGE_CURVE('',#194185,#194194,#194196,.T.); +#194194 = VERTEX_POINT('',#194195); +#194195 = CARTESIAN_POINT('',(82.731551,-83.760728,1.585)); +#194196 = LINE('',#194197,#194198); +#194197 = CARTESIAN_POINT('',(85.360224,-82.887541,1.585)); +#194198 = VECTOR('',#194199,1.); +#194199 = DIRECTION('',(-0.949011749004,-0.315240702087,0.)); +#194200 = ORIENTED_EDGE('',*,*,#194201,.T.); +#194201 = EDGE_CURVE('',#194194,#194202,#194204,.T.); +#194202 = VERTEX_POINT('',#194203); +#194203 = CARTESIAN_POINT('',(82.638505,-83.481592,1.585)); +#194204 = CIRCLE('',#194205,0.149999919344); +#194205 = AXIS2_PLACEMENT_3D('',#194206,#194207,#194208); +#194206 = CARTESIAN_POINT('',(82.7127898908,-83.61190597009,1.585)); +#194207 = DIRECTION('',(0.,0.,-1.)); +#194208 = DIRECTION('',(0.125074128588,-0.992147399512,0.)); +#194209 = ORIENTED_EDGE('',*,*,#194210,.T.); +#194210 = EDGE_CURVE('',#194202,#194211,#194213,.T.); +#194211 = VERTEX_POINT('',#194212); +#194212 = CARTESIAN_POINT('',(83.305647,-83.256173,1.585)); +#194213 = LINE('',#194214,#194215); +#194214 = CARTESIAN_POINT('',(82.638505,-83.481592,1.585)); +#194215 = VECTOR('',#194216,1.); +#194216 = DIRECTION('',(0.947380967027,0.320108268114,0.)); +#194217 = ORIENTED_EDGE('',*,*,#194218,.T.); +#194218 = EDGE_CURVE('',#194211,#194219,#194221,.T.); +#194219 = VERTEX_POINT('',#194220); +#194220 = CARTESIAN_POINT('',(83.305647,-82.234306,1.585)); +#194221 = LINE('',#194222,#194223); +#194222 = CARTESIAN_POINT('',(83.305647,-83.256173,1.585)); +#194223 = VECTOR('',#194224,1.); +#194224 = DIRECTION('',(0.,1.,0.)); +#194225 = ORIENTED_EDGE('',*,*,#194226,.T.); +#194226 = EDGE_CURVE('',#194219,#194227,#194229,.T.); +#194227 = VERTEX_POINT('',#194228); +#194228 = CARTESIAN_POINT('',(82.638505,-82.008887,1.585)); +#194229 = LINE('',#194230,#194231); +#194230 = CARTESIAN_POINT('',(83.305647,-82.234306,1.585)); +#194231 = VECTOR('',#194232,1.); +#194232 = DIRECTION('',(-0.947380967027,0.320108268114,0.)); +#194233 = ORIENTED_EDGE('',*,*,#194234,.T.); +#194234 = EDGE_CURVE('',#194227,#194235,#194237,.T.); +#194235 = VERTEX_POINT('',#194236); +#194236 = CARTESIAN_POINT('',(82.760224,-81.73627,1.585)); +#194237 = CIRCLE('',#194238,0.15000021416); +#194238 = AXIS2_PLACEMENT_3D('',#194239,#194240,#194241); +#194239 = CARTESIAN_POINT('',(82.71279009555,-81.87857280726,1.585)); +#194240 = DIRECTION('',(0.,0.,-1.)); +#194241 = DIRECTION('',(-0.495233263271,-0.868760044517,-0.)); +#194242 = ORIENTED_EDGE('',*,*,#194243,.T.); +#194243 = EDGE_CURVE('',#194235,#194183,#194244,.T.); +#194244 = LINE('',#194245,#194246); +#194245 = CARTESIAN_POINT('',(82.760224,-81.73627,1.585)); +#194246 = VECTOR('',#194247,1.); +#194247 = DIRECTION('',(0.948353748101,-0.317214704046,0.)); +#194248 = FACE_BOUND('',#194249,.F.); +#194249 = EDGE_LOOP('',(#194250,#194260,#194268)); +#194250 = ORIENTED_EDGE('',*,*,#194251,.T.); +#194251 = EDGE_CURVE('',#194252,#194254,#194256,.T.); +#194252 = VERTEX_POINT('',#194253); +#194253 = CARTESIAN_POINT('',(83.605647,-83.156173,1.585)); +#194254 = VERTEX_POINT('',#194255); +#194255 = CARTESIAN_POINT('',(84.838448,-82.745238,1.585)); +#194256 = LINE('',#194257,#194258); +#194257 = CARTESIAN_POINT('',(83.605647,-83.156173,1.585)); +#194258 = VECTOR('',#194259,1.); +#194259 = DIRECTION('',(0.948682990236,0.316228689458,0.)); +#194260 = ORIENTED_EDGE('',*,*,#194261,.T.); +#194261 = EDGE_CURVE('',#194254,#194262,#194264,.T.); +#194262 = VERTEX_POINT('',#194263); +#194263 = CARTESIAN_POINT('',(83.605647,-82.334305,1.585)); +#194264 = LINE('',#194265,#194266); +#194265 = CARTESIAN_POINT('',(84.838448,-82.745238,1.585)); +#194266 = VECTOR('',#194267,1.); +#194267 = DIRECTION('',(-0.948683451957,0.316227304296,0.)); +#194268 = ORIENTED_EDGE('',*,*,#194269,.T.); +#194269 = EDGE_CURVE('',#194262,#194252,#194270,.T.); +#194270 = LINE('',#194271,#194272); +#194271 = CARTESIAN_POINT('',(83.605647,-82.334305,1.585)); +#194272 = VECTOR('',#194273,1.); +#194273 = DIRECTION('',(0.,-1.,0.)); +#194274 = PLANE('',#194275); +#194275 = AXIS2_PLACEMENT_3D('',#194276,#194277,#194278); +#194276 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194277 = DIRECTION('',(0.,0.,1.)); +#194278 = DIRECTION('',(1.,0.,-0.)); +#194279 = SHELL_BASED_SURFACE_MODEL('',(#194280)); +#194280 = OPEN_SHELL('',(#194281)); +#194281 = ADVANCED_FACE('',(#194282,#194422),#194489,.T.); +#194282 = FACE_BOUND('',#194283,.F.); +#194283 = EDGE_LOOP('',(#194284,#194294,#194302,#194310,#194318,#194326, + #194334,#194342,#194350,#194358,#194366,#194375,#194383,#194392, + #194400,#194408,#194416)); +#194284 = ORIENTED_EDGE('',*,*,#194285,.T.); +#194285 = EDGE_CURVE('',#194286,#194288,#194290,.T.); +#194286 = VERTEX_POINT('',#194287); +#194287 = CARTESIAN_POINT('',(185.164351,-82.66624,1.585)); +#194288 = VERTEX_POINT('',#194289); +#194289 = CARTESIAN_POINT('',(185.346108,-82.57653,1.585)); +#194290 = LINE('',#194291,#194292); +#194291 = CARTESIAN_POINT('',(185.164351,-82.66624,1.585)); +#194292 = VECTOR('',#194293,1.); +#194293 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#194294 = ORIENTED_EDGE('',*,*,#194295,.T.); +#194295 = EDGE_CURVE('',#194288,#194296,#194298,.T.); +#194296 = VERTEX_POINT('',#194297); +#194297 = CARTESIAN_POINT('',(185.375162,-82.572623,1.585)); +#194298 = LINE('',#194299,#194300); +#194299 = CARTESIAN_POINT('',(185.346108,-82.57653,1.585)); +#194300 = VECTOR('',#194301,1.); +#194301 = DIRECTION('',(0.991079213316,0.13327412702,0.)); +#194302 = ORIENTED_EDGE('',*,*,#194303,.T.); +#194303 = EDGE_CURVE('',#194296,#194304,#194306,.T.); +#194304 = VERTEX_POINT('',#194305); +#194305 = CARTESIAN_POINT('',(185.625193,-82.574737,1.585)); +#194306 = LINE('',#194307,#194308); +#194307 = CARTESIAN_POINT('',(185.375162,-82.572623,1.585)); +#194308 = VECTOR('',#194309,1.); +#194309 = DIRECTION('',(0.999964258813,-8.454649396022E-03,0.)); +#194310 = ORIENTED_EDGE('',*,*,#194311,.T.); +#194311 = EDGE_CURVE('',#194304,#194312,#194314,.T.); +#194312 = VERTEX_POINT('',#194313); +#194313 = CARTESIAN_POINT('',(185.652927,-82.584236,1.585)); +#194314 = LINE('',#194315,#194316); +#194315 = CARTESIAN_POINT('',(185.625193,-82.574737,1.585)); +#194316 = VECTOR('',#194317,1.); +#194317 = DIRECTION('',(0.946048457417,-0.324025178373,0.)); +#194318 = ORIENTED_EDGE('',*,*,#194319,.T.); +#194319 = EDGE_CURVE('',#194312,#194320,#194322,.T.); +#194320 = VERTEX_POINT('',#194321); +#194321 = CARTESIAN_POINT('',(185.825457,-82.674107,1.585)); +#194322 = LINE('',#194323,#194324); +#194323 = CARTESIAN_POINT('',(185.652927,-82.584236,1.585)); +#194324 = VECTOR('',#194325,1.); +#194325 = DIRECTION('',(0.886889600195,-0.461981425023,0.)); +#194326 = ORIENTED_EDGE('',*,*,#194327,.T.); +#194327 = EDGE_CURVE('',#194320,#194328,#194330,.T.); +#194328 = VERTEX_POINT('',#194329); +#194329 = CARTESIAN_POINT('',(185.924877,-82.776575,1.585)); +#194330 = LINE('',#194331,#194332); +#194331 = CARTESIAN_POINT('',(185.825457,-82.674107,1.585)); +#194332 = VECTOR('',#194333,1.); +#194333 = DIRECTION('',(0.696351894269,-0.717700522048,0.)); +#194334 = ORIENTED_EDGE('',*,*,#194335,.T.); +#194335 = EDGE_CURVE('',#194328,#194336,#194338,.T.); +#194336 = VERTEX_POINT('',#194337); +#194337 = CARTESIAN_POINT('',(186.014588,-82.958332,1.585)); +#194338 = LINE('',#194339,#194340); +#194339 = CARTESIAN_POINT('',(185.924877,-82.776575,1.585)); +#194340 = VECTOR('',#194341,1.); +#194341 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#194342 = ORIENTED_EDGE('',*,*,#194343,.T.); +#194343 = EDGE_CURVE('',#194336,#194344,#194346,.T.); +#194344 = VERTEX_POINT('',#194345); +#194345 = CARTESIAN_POINT('',(186.018495,-82.987385,1.585)); +#194346 = LINE('',#194347,#194348); +#194347 = CARTESIAN_POINT('',(186.014588,-82.958332,1.585)); +#194348 = VECTOR('',#194349,1.); +#194349 = DIRECTION('',(0.133278632812,-0.991078607395,0.)); +#194350 = ORIENTED_EDGE('',*,*,#194351,.T.); +#194351 = EDGE_CURVE('',#194344,#194352,#194354,.T.); +#194352 = VERTEX_POINT('',#194353); +#194353 = CARTESIAN_POINT('',(186.018495,-83.486909,1.585)); +#194354 = LINE('',#194355,#194356); +#194355 = CARTESIAN_POINT('',(186.018495,-82.987385,1.585)); +#194356 = VECTOR('',#194357,1.); +#194357 = DIRECTION('',(0.,-1.,0.)); +#194358 = ORIENTED_EDGE('',*,*,#194359,.T.); +#194359 = EDGE_CURVE('',#194352,#194360,#194362,.T.); +#194360 = VERTEX_POINT('',#194361); +#194361 = CARTESIAN_POINT('',(186.69186,-83.489023,1.585)); +#194362 = LINE('',#194363,#194364); +#194363 = CARTESIAN_POINT('',(186.018495,-83.486909,1.585)); +#194364 = VECTOR('',#194365,1.); +#194365 = DIRECTION('',(0.999995071943,-3.139440841289E-03,0.)); +#194366 = ORIENTED_EDGE('',*,*,#194367,.T.); +#194367 = EDGE_CURVE('',#194360,#194368,#194370,.T.); +#194368 = VERTEX_POINT('',#194369); +#194369 = CARTESIAN_POINT('',(186.69186,-83.704795,1.585)); +#194370 = CIRCLE('',#194371,0.109999639072); +#194371 = AXIS2_PLACEMENT_3D('',#194372,#194373,#194374); +#194372 = CARTESIAN_POINT('',(186.6704,-83.596909,1.585)); +#194373 = DIRECTION('',(0.,0.,-1.)); +#194374 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#194375 = ORIENTED_EDGE('',*,*,#194376,.T.); +#194376 = EDGE_CURVE('',#194368,#194377,#194379,.T.); +#194377 = VERTEX_POINT('',#194378); +#194378 = CARTESIAN_POINT('',(185.04894,-83.704795,1.585)); +#194379 = LINE('',#194380,#194381); +#194380 = CARTESIAN_POINT('',(186.69186,-83.704795,1.585)); +#194381 = VECTOR('',#194382,1.); +#194382 = DIRECTION('',(-1.,0.,0.)); +#194383 = ORIENTED_EDGE('',*,*,#194384,.T.); +#194384 = EDGE_CURVE('',#194377,#194385,#194387,.T.); +#194385 = VERTEX_POINT('',#194386); +#194386 = CARTESIAN_POINT('',(184.962514,-83.618369,1.585)); +#194387 = CIRCLE('',#194388,0.109995194153); +#194388 = AXIS2_PLACEMENT_3D('',#194389,#194390,#194391); +#194389 = CARTESIAN_POINT('',(185.07039621987,-83.59691278012,1.585)); +#194390 = DIRECTION('',(0.,0.,-1.)); +#194391 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#194392 = ORIENTED_EDGE('',*,*,#194393,.T.); +#194393 = EDGE_CURVE('',#194385,#194394,#194396,.T.); +#194394 = VERTEX_POINT('',#194395); +#194395 = CARTESIAN_POINT('',(184.962514,-82.965925,1.585)); +#194396 = LINE('',#194397,#194398); +#194397 = CARTESIAN_POINT('',(184.962514,-83.618369,1.585)); +#194398 = VECTOR('',#194399,1.); +#194399 = DIRECTION('',(0.,1.,0.)); +#194400 = ORIENTED_EDGE('',*,*,#194401,.T.); +#194401 = EDGE_CURVE('',#194394,#194402,#194404,.T.); +#194402 = VERTEX_POINT('',#194403); +#194403 = CARTESIAN_POINT('',(184.972013,-82.938192,1.585)); +#194404 = LINE('',#194405,#194406); +#194405 = CARTESIAN_POINT('',(184.962514,-82.965925,1.585)); +#194406 = VECTOR('',#194407,1.); +#194407 = DIRECTION('',(0.324035635352,0.946044875797,0.)); +#194408 = ORIENTED_EDGE('',*,*,#194409,.T.); +#194409 = EDGE_CURVE('',#194402,#194410,#194412,.T.); +#194410 = VERTEX_POINT('',#194411); +#194411 = CARTESIAN_POINT('',(185.061884,-82.765659,1.585)); +#194412 = LINE('',#194413,#194414); +#194413 = CARTESIAN_POINT('',(184.972013,-82.938192,1.585)); +#194414 = VECTOR('',#194415,1.); +#194415 = DIRECTION('',(0.461975106506,0.886892891486,0.)); +#194416 = ORIENTED_EDGE('',*,*,#194417,.T.); +#194417 = EDGE_CURVE('',#194410,#194286,#194418,.T.); +#194418 = LINE('',#194419,#194420); +#194419 = CARTESIAN_POINT('',(185.061884,-82.765659,1.585)); +#194420 = VECTOR('',#194421,1.); +#194421 = DIRECTION('',(0.717700626174,0.696351786951,0.)); +#194422 = FACE_BOUND('',#194423,.F.); +#194423 = EDGE_LOOP('',(#194424,#194435,#194443,#194451,#194459,#194467, + #194475,#194483)); +#194424 = ORIENTED_EDGE('',*,*,#194425,.T.); +#194425 = EDGE_CURVE('',#194426,#194428,#194430,.T.); +#194426 = VERTEX_POINT('',#194427); +#194427 = CARTESIAN_POINT('',(185.690955,-82.849218,1.585)); +#194428 = VERTEX_POINT('',#194429); +#194429 = CARTESIAN_POINT('',(185.287938,-82.849218,1.585)); +#194430 = CIRCLE('',#194431,0.330157797413); +#194431 = AXIS2_PLACEMENT_3D('',#194432,#194433,#194434); +#194432 = CARTESIAN_POINT('',(185.4894465,-83.11074906052,1.585)); +#194433 = DIRECTION('',(0.,0.,1.)); +#194434 = DIRECTION('',(0.610339969491,0.792139584696,-0.)); +#194435 = ORIENTED_EDGE('',*,*,#194436,.T.); +#194436 = EDGE_CURVE('',#194428,#194437,#194439,.T.); +#194437 = VERTEX_POINT('',#194438); +#194438 = CARTESIAN_POINT('',(185.236993,-82.900163,1.585)); +#194439 = LINE('',#194440,#194441); +#194440 = CARTESIAN_POINT('',(185.287938,-82.849218,1.585)); +#194441 = VECTOR('',#194442,1.); +#194442 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#194443 = ORIENTED_EDGE('',*,*,#194444,.T.); +#194444 = EDGE_CURVE('',#194437,#194445,#194447,.T.); +#194445 = VERTEX_POINT('',#194446); +#194446 = CARTESIAN_POINT('',(185.1804,-83.013351,1.585)); +#194447 = LINE('',#194448,#194449); +#194448 = CARTESIAN_POINT('',(185.236993,-82.900163,1.585)); +#194449 = VECTOR('',#194450,1.); +#194450 = DIRECTION('',(-0.447207273756,-0.894430351844,0.)); +#194451 = ORIENTED_EDGE('',*,*,#194452,.T.); +#194452 = EDGE_CURVE('',#194445,#194453,#194455,.T.); +#194453 = VERTEX_POINT('',#194454); +#194454 = CARTESIAN_POINT('',(185.1804,-83.486909,1.585)); +#194455 = LINE('',#194456,#194457); +#194456 = CARTESIAN_POINT('',(185.1804,-83.013351,1.585)); +#194457 = VECTOR('',#194458,1.); +#194458 = DIRECTION('',(0.,-1.,0.)); +#194459 = ORIENTED_EDGE('',*,*,#194460,.T.); +#194460 = EDGE_CURVE('',#194453,#194461,#194463,.T.); +#194461 = VERTEX_POINT('',#194462); +#194462 = CARTESIAN_POINT('',(185.798495,-83.486909,1.585)); +#194463 = LINE('',#194464,#194465); +#194464 = CARTESIAN_POINT('',(185.1804,-83.486909,1.585)); +#194465 = VECTOR('',#194466,1.); +#194466 = DIRECTION('',(1.,0.,0.)); +#194467 = ORIENTED_EDGE('',*,*,#194468,.T.); +#194468 = EDGE_CURVE('',#194461,#194469,#194471,.T.); +#194469 = VERTEX_POINT('',#194470); +#194470 = CARTESIAN_POINT('',(185.798495,-83.013351,1.585)); +#194471 = LINE('',#194472,#194473); +#194472 = CARTESIAN_POINT('',(185.798495,-83.486909,1.585)); +#194473 = VECTOR('',#194474,1.); +#194474 = DIRECTION('',(0.,1.,0.)); +#194475 = ORIENTED_EDGE('',*,*,#194476,.T.); +#194476 = EDGE_CURVE('',#194469,#194477,#194479,.T.); +#194477 = VERTEX_POINT('',#194478); +#194478 = CARTESIAN_POINT('',(185.741901,-82.900164,1.585)); +#194479 = LINE('',#194480,#194481); +#194480 = CARTESIAN_POINT('',(185.798495,-83.013351,1.585)); +#194481 = VECTOR('',#194482,1.); +#194482 = DIRECTION('',(-0.447216756375,0.894425610556,0.)); +#194483 = ORIENTED_EDGE('',*,*,#194484,.T.); +#194484 = EDGE_CURVE('',#194477,#194426,#194485,.T.); +#194485 = LINE('',#194486,#194487); +#194486 = CARTESIAN_POINT('',(185.741901,-82.900164,1.585)); +#194487 = VECTOR('',#194488,1.); +#194488 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#194489 = PLANE('',#194490); +#194490 = AXIS2_PLACEMENT_3D('',#194491,#194492,#194493); +#194491 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194492 = DIRECTION('',(0.,0.,1.)); +#194493 = DIRECTION('',(1.,0.,-0.)); +#194494 = SHELL_BASED_SURFACE_MODEL('',(#194495)); +#194495 = OPEN_SHELL('',(#194496)); +#194496 = ADVANCED_FACE('',(#194497,#194608),#194660,.T.); +#194497 = FACE_BOUND('',#194498,.F.); +#194498 = EDGE_LOOP('',(#194499,#194510,#194518,#194527,#194535,#194544, + #194552,#194560,#194569,#194577,#194585,#194593,#194602)); +#194499 = ORIENTED_EDGE('',*,*,#194500,.T.); +#194500 = EDGE_CURVE('',#194501,#194503,#194505,.T.); +#194501 = VERTEX_POINT('',#194502); +#194502 = CARTESIAN_POINT('',(200.905012,-82.460187,1.585)); +#194503 = VERTEX_POINT('',#194504); +#194504 = CARTESIAN_POINT('',(200.978571,-82.399819,1.585)); +#194505 = CIRCLE('',#194506,7.500074938985E-02); +#194506 = AXIS2_PLACEMENT_3D('',#194507,#194508,#194509); +#194507 = CARTESIAN_POINT('',(200.97857146611,-82.47481974938,1.585)); +#194508 = DIRECTION('',(0.,0.,-1.)); +#194509 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#194510 = ORIENTED_EDGE('',*,*,#194511,.T.); +#194511 = EDGE_CURVE('',#194503,#194512,#194514,.T.); +#194512 = VERTEX_POINT('',#194513); +#194513 = CARTESIAN_POINT('',(201.374155,-82.40126,1.585)); +#194514 = LINE('',#194515,#194516); +#194515 = CARTESIAN_POINT('',(200.978571,-82.399819,1.585)); +#194516 = VECTOR('',#194517,1.); +#194517 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#194518 = ORIENTED_EDGE('',*,*,#194519,.T.); +#194519 = EDGE_CURVE('',#194512,#194520,#194522,.T.); +#194520 = VERTEX_POINT('',#194521); +#194521 = CARTESIAN_POINT('',(201.623558,-82.650663,1.585)); +#194522 = CIRCLE('',#194523,0.347870264855); +#194523 = AXIS2_PLACEMENT_3D('',#194524,#194525,#194526); +#194524 = CARTESIAN_POINT('',(201.28682726502,-82.73799073497,1.585)); +#194525 = DIRECTION('',(0.,0.,-1.)); +#194526 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#194527 = ORIENTED_EDGE('',*,*,#194528,.T.); +#194528 = EDGE_CURVE('',#194520,#194529,#194531,.T.); +#194529 = VERTEX_POINT('',#194530); +#194530 = CARTESIAN_POINT('',(201.622336,-82.827962,1.585)); +#194531 = LINE('',#194532,#194533); +#194532 = CARTESIAN_POINT('',(201.623558,-82.650663,1.585)); +#194533 = VECTOR('',#194534,1.); +#194534 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#194535 = ORIENTED_EDGE('',*,*,#194536,.T.); +#194536 = EDGE_CURVE('',#194529,#194537,#194539,.T.); +#194537 = VERTEX_POINT('',#194538); +#194538 = CARTESIAN_POINT('',(201.374155,-83.072187,1.585)); +#194539 = CIRCLE('',#194540,0.348632345848); +#194540 = AXIS2_PLACEMENT_3D('',#194541,#194542,#194543); +#194541 = CARTESIAN_POINT('',(201.28638619403,-82.7347834593,1.585)); +#194542 = DIRECTION('',(0.,0.,-1.)); +#194543 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#194544 = ORIENTED_EDGE('',*,*,#194545,.T.); +#194545 = EDGE_CURVE('',#194537,#194546,#194548,.T.); +#194546 = VERTEX_POINT('',#194547); +#194547 = CARTESIAN_POINT('',(201.360638,-83.073518,1.585)); +#194548 = LINE('',#194549,#194550); +#194549 = CARTESIAN_POINT('',(201.374155,-83.072187,1.585)); +#194550 = VECTOR('',#194551,1.); +#194551 = DIRECTION('',(-0.995186940545,-9.799465990027E-02,0.)); +#194552 = ORIENTED_EDGE('',*,*,#194553,.T.); +#194553 = EDGE_CURVE('',#194546,#194554,#194556,.T.); +#194554 = VERTEX_POINT('',#194555); +#194555 = CARTESIAN_POINT('',(201.618652,-83.444623,1.585)); +#194556 = LINE('',#194557,#194558); +#194557 = CARTESIAN_POINT('',(201.360638,-83.073518,1.585)); +#194558 = VECTOR('',#194559,1.); +#194559 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#194560 = ORIENTED_EDGE('',*,*,#194561,.T.); +#194561 = EDGE_CURVE('',#194554,#194562,#194564,.T.); +#194562 = VERTEX_POINT('',#194563); +#194563 = CARTESIAN_POINT('',(201.488557,-83.517829,1.585)); +#194564 = CIRCLE('',#194565,7.500005951703E-02); +#194565 = AXIS2_PLACEMENT_3D('',#194566,#194567,#194568); +#194566 = CARTESIAN_POINT('',(201.54999906294,-83.47481874739,1.585)); +#194567 = DIRECTION('',(0.,0.,-1.)); +#194568 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#194569 = ORIENTED_EDGE('',*,*,#194570,.T.); +#194570 = EDGE_CURVE('',#194562,#194571,#194573,.T.); +#194571 = VERTEX_POINT('',#194572); +#194572 = CARTESIAN_POINT('',(201.177617,-83.073628,1.585)); +#194573 = LINE('',#194574,#194575); +#194574 = CARTESIAN_POINT('',(201.488557,-83.517829,1.585)); +#194575 = VECTOR('',#194576,1.); +#194576 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#194577 = ORIENTED_EDGE('',*,*,#194578,.T.); +#194578 = EDGE_CURVE('',#194571,#194579,#194581,.T.); +#194579 = VERTEX_POINT('',#194580); +#194580 = CARTESIAN_POINT('',(201.053571,-83.073628,1.585)); +#194581 = LINE('',#194582,#194583); +#194582 = CARTESIAN_POINT('',(201.177617,-83.073628,1.585)); +#194583 = VECTOR('',#194584,1.); +#194584 = DIRECTION('',(-1.,0.,0.)); +#194585 = ORIENTED_EDGE('',*,*,#194586,.T.); +#194586 = EDGE_CURVE('',#194579,#194587,#194589,.T.); +#194587 = VERTEX_POINT('',#194588); +#194588 = CARTESIAN_POINT('',(201.05213,-83.489451,1.585)); +#194589 = LINE('',#194590,#194591); +#194590 = CARTESIAN_POINT('',(201.053571,-83.073628,1.585)); +#194591 = VECTOR('',#194592,1.); +#194592 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#194593 = ORIENTED_EDGE('',*,*,#194594,.T.); +#194594 = EDGE_CURVE('',#194587,#194595,#194597,.T.); +#194595 = VERTEX_POINT('',#194596); +#194596 = CARTESIAN_POINT('',(200.903571,-83.474819,1.585)); +#194597 = CIRCLE('',#194598,7.500006711465E-02); +#194598 = AXIS2_PLACEMENT_3D('',#194599,#194600,#194601); +#194599 = CARTESIAN_POINT('',(200.97857106711,-83.47481906711,1.585)); +#194600 = DIRECTION('',(-0.,0.,-1.)); +#194601 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#194602 = ORIENTED_EDGE('',*,*,#194603,.T.); +#194603 = EDGE_CURVE('',#194595,#194501,#194604,.T.); +#194604 = LINE('',#194605,#194606); +#194605 = CARTESIAN_POINT('',(200.903571,-83.474819,1.585)); +#194606 = VECTOR('',#194607,1.); +#194607 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#194608 = FACE_BOUND('',#194609,.F.); +#194609 = EDGE_LOOP('',(#194610,#194621,#194629,#194637,#194645,#194654) + ); +#194610 = ORIENTED_EDGE('',*,*,#194611,.T.); +#194611 = EDGE_CURVE('',#194612,#194614,#194616,.T.); +#194612 = VERTEX_POINT('',#194613); +#194613 = CARTESIAN_POINT('',(201.474999,-82.683,1.585)); +#194614 = VERTEX_POINT('',#194615); +#194615 = CARTESIAN_POINT('',(201.341818,-82.549819,1.585)); +#194616 = CIRCLE('',#194617,0.18686440374); +#194617 = AXIS2_PLACEMENT_3D('',#194618,#194619,#194620); +#194618 = CARTESIAN_POINT('',(201.294282,-82.730536,1.585)); +#194619 = DIRECTION('',(0.,0.,1.)); +#194620 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#194621 = ORIENTED_EDGE('',*,*,#194622,.T.); +#194622 = EDGE_CURVE('',#194614,#194623,#194625,.T.); +#194623 = VERTEX_POINT('',#194624); +#194624 = CARTESIAN_POINT('',(201.053571,-82.549819,1.585)); +#194625 = LINE('',#194626,#194627); +#194626 = CARTESIAN_POINT('',(201.341818,-82.549819,1.585)); +#194627 = VECTOR('',#194628,1.); +#194628 = DIRECTION('',(-1.,0.,0.)); +#194629 = ORIENTED_EDGE('',*,*,#194630,.T.); +#194630 = EDGE_CURVE('',#194623,#194631,#194633,.T.); +#194631 = VERTEX_POINT('',#194632); +#194632 = CARTESIAN_POINT('',(201.053571,-82.923628,1.585)); +#194633 = LINE('',#194634,#194635); +#194634 = CARTESIAN_POINT('',(201.053571,-82.549819,1.585)); +#194635 = VECTOR('',#194636,1.); +#194636 = DIRECTION('',(0.,-1.,0.)); +#194637 = ORIENTED_EDGE('',*,*,#194638,.T.); +#194638 = EDGE_CURVE('',#194631,#194639,#194641,.T.); +#194639 = VERTEX_POINT('',#194640); +#194640 = CARTESIAN_POINT('',(201.341818,-82.923628,1.585)); +#194641 = LINE('',#194642,#194643); +#194642 = CARTESIAN_POINT('',(201.053571,-82.923628,1.585)); +#194643 = VECTOR('',#194644,1.); +#194644 = DIRECTION('',(1.,0.,0.)); +#194645 = ORIENTED_EDGE('',*,*,#194646,.T.); +#194646 = EDGE_CURVE('',#194639,#194647,#194649,.T.); +#194647 = VERTEX_POINT('',#194648); +#194648 = CARTESIAN_POINT('',(201.474999,-82.790447,1.585)); +#194649 = CIRCLE('',#194650,0.18686440374); +#194650 = AXIS2_PLACEMENT_3D('',#194651,#194652,#194653); +#194651 = CARTESIAN_POINT('',(201.294282,-82.742911,1.585)); +#194652 = DIRECTION('',(0.,0.,1.)); +#194653 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#194654 = ORIENTED_EDGE('',*,*,#194655,.T.); +#194655 = EDGE_CURVE('',#194647,#194612,#194656,.T.); +#194656 = LINE('',#194657,#194658); +#194657 = CARTESIAN_POINT('',(201.474999,-82.790447,1.585)); +#194658 = VECTOR('',#194659,1.); +#194659 = DIRECTION('',(0.,1.,0.)); +#194660 = PLANE('',#194661); +#194661 = AXIS2_PLACEMENT_3D('',#194662,#194663,#194664); +#194662 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194663 = DIRECTION('',(0.,0.,1.)); +#194664 = DIRECTION('',(1.,0.,-0.)); +#194665 = SHELL_BASED_SURFACE_MODEL('',(#194666)); +#194666 = OPEN_SHELL('',(#194667)); +#194667 = ADVANCED_FACE('',(#194668),#194760,.T.); +#194668 = FACE_BOUND('',#194669,.F.); +#194669 = EDGE_LOOP('',(#194670,#194681,#194689,#194697,#194705,#194714, + #194722,#194730,#194738,#194746,#194754)); +#194670 = ORIENTED_EDGE('',*,*,#194671,.T.); +#194671 = EDGE_CURVE('',#194672,#194674,#194676,.T.); +#194672 = VERTEX_POINT('',#194673); +#194673 = CARTESIAN_POINT('',(203.270236,-82.412459,1.585)); +#194674 = VERTEX_POINT('',#194675); +#194675 = CARTESIAN_POINT('',(203.386904,-82.474819,1.585)); +#194676 = CIRCLE('',#194677,7.499999999999E-02); +#194677 = AXIS2_PLACEMENT_3D('',#194678,#194679,#194680); +#194678 = CARTESIAN_POINT('',(203.311904,-82.47481906555,1.585)); +#194679 = DIRECTION('',(0.,0.,-1.)); +#194680 = DIRECTION('',(-0.555573333334,0.831467540731,0.)); +#194681 = ORIENTED_EDGE('',*,*,#194682,.T.); +#194682 = EDGE_CURVE('',#194674,#194683,#194685,.T.); +#194683 = VERTEX_POINT('',#194684); +#194684 = CARTESIAN_POINT('',(203.386904,-83.314256,1.585)); +#194685 = LINE('',#194686,#194687); +#194686 = CARTESIAN_POINT('',(203.386904,-82.474819,1.585)); +#194687 = VECTOR('',#194688,1.); +#194688 = DIRECTION('',(0.,-1.,0.)); +#194689 = ORIENTED_EDGE('',*,*,#194690,.T.); +#194690 = EDGE_CURVE('',#194683,#194691,#194693,.T.); +#194691 = VERTEX_POINT('',#194692); +#194692 = CARTESIAN_POINT('',(203.415424,-83.371298,1.585)); +#194693 = LINE('',#194694,#194695); +#194694 = CARTESIAN_POINT('',(203.386904,-83.314256,1.585)); +#194695 = VECTOR('',#194696,1.); +#194696 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#194697 = ORIENTED_EDGE('',*,*,#194698,.T.); +#194698 = EDGE_CURVE('',#194691,#194699,#194701,.T.); +#194699 = VERTEX_POINT('',#194700); +#194700 = CARTESIAN_POINT('',(203.500745,-83.415569,1.585)); +#194701 = LINE('',#194702,#194703); +#194702 = CARTESIAN_POINT('',(203.415424,-83.371298,1.585)); +#194703 = VECTOR('',#194704,1.); +#194704 = DIRECTION('',(0.887624909794,-0.460567062992,0.)); +#194705 = ORIENTED_EDGE('',*,*,#194706,.T.); +#194706 = EDGE_CURVE('',#194699,#194707,#194709,.T.); +#194707 = VERTEX_POINT('',#194708); +#194708 = CARTESIAN_POINT('',(203.42122,-83.541901,1.585)); +#194709 = CIRCLE('',#194710,7.500029440361E-02); +#194710 = AXIS2_PLACEMENT_3D('',#194711,#194712,#194713); +#194711 = CARTESIAN_POINT('',(203.45476105397,-83.47481864867,1.585)); +#194712 = DIRECTION('',(0.,0.,-1.)); +#194713 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#194714 = ORIENTED_EDGE('',*,*,#194715,.T.); +#194715 = EDGE_CURVE('',#194707,#194716,#194718,.T.); +#194716 = VERTEX_POINT('',#194717); +#194717 = CARTESIAN_POINT('',(203.313539,-83.48645,1.585)); +#194718 = LINE('',#194719,#194720); +#194719 = CARTESIAN_POINT('',(203.42122,-83.541901,1.585)); +#194720 = VECTOR('',#194721,1.); +#194721 = DIRECTION('',(-0.889045233553,0.457819366887,0.)); +#194722 = ORIENTED_EDGE('',*,*,#194723,.T.); +#194723 = EDGE_CURVE('',#194716,#194724,#194726,.T.); +#194724 = VERTEX_POINT('',#194725); +#194725 = CARTESIAN_POINT('',(203.292441,-83.460741,1.585)); +#194726 = LINE('',#194727,#194728); +#194727 = CARTESIAN_POINT('',(203.313539,-83.48645,1.585)); +#194728 = VECTOR('',#194729,1.); +#194729 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#194730 = ORIENTED_EDGE('',*,*,#194731,.T.); +#194731 = EDGE_CURVE('',#194724,#194732,#194734,.T.); +#194732 = VERTEX_POINT('',#194733); +#194733 = CARTESIAN_POINT('',(203.238345,-83.346593,1.585)); +#194734 = LINE('',#194735,#194736); +#194735 = CARTESIAN_POINT('',(203.292441,-83.460741,1.585)); +#194736 = VECTOR('',#194737,1.); +#194737 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#194738 = ORIENTED_EDGE('',*,*,#194739,.T.); +#194739 = EDGE_CURVE('',#194732,#194740,#194742,.T.); +#194740 = VERTEX_POINT('',#194741); +#194741 = CARTESIAN_POINT('',(203.238345,-82.460187,1.585)); +#194742 = LINE('',#194743,#194744); +#194743 = CARTESIAN_POINT('',(203.238345,-83.346593,1.585)); +#194744 = VECTOR('',#194745,1.); +#194745 = DIRECTION('',(0.,1.,0.)); +#194746 = ORIENTED_EDGE('',*,*,#194747,.T.); +#194747 = EDGE_CURVE('',#194740,#194748,#194750,.T.); +#194748 = VERTEX_POINT('',#194749); +#194749 = CARTESIAN_POINT('',(203.249544,-82.433151,1.585)); +#194750 = LINE('',#194751,#194752); +#194751 = CARTESIAN_POINT('',(203.238345,-82.460187,1.585)); +#194752 = VECTOR('',#194753,1.); +#194753 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#194754 = ORIENTED_EDGE('',*,*,#194755,.T.); +#194755 = EDGE_CURVE('',#194748,#194672,#194756,.T.); +#194756 = LINE('',#194757,#194758); +#194757 = CARTESIAN_POINT('',(203.249544,-82.433151,1.585)); +#194758 = VECTOR('',#194759,1.); +#194759 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#194760 = PLANE('',#194761); +#194761 = AXIS2_PLACEMENT_3D('',#194762,#194763,#194764); +#194762 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194763 = DIRECTION('',(0.,0.,1.)); +#194764 = DIRECTION('',(1.,0.,-0.)); +#194765 = SHELL_BASED_SURFACE_MODEL('',(#194766)); +#194766 = OPEN_SHELL('',(#194767)); +#194767 = ADVANCED_FACE('',(#194768),#194985,.T.); +#194768 = FACE_BOUND('',#194769,.F.); +#194769 = EDGE_LOOP('',(#194770,#194781,#194789,#194797,#194805,#194814, + #194822,#194831,#194839,#194848,#194856,#194864,#194873,#194881, + #194889,#194898,#194906,#194914,#194922,#194930,#194938,#194946, + #194954,#194963,#194971,#194979)); +#194770 = ORIENTED_EDGE('',*,*,#194771,.T.); +#194771 = EDGE_CURVE('',#194772,#194774,#194776,.T.); +#194772 = VERTEX_POINT('',#194773); +#194773 = CARTESIAN_POINT('',(201.936903,-82.745792,1.585)); +#194774 = VERTEX_POINT('',#194775); +#194775 = CARTESIAN_POINT('',(202.03964,-82.765193,1.585)); +#194776 = CIRCLE('',#194777,7.440760172328E-02); +#194777 = AXIS2_PLACEMENT_3D('',#194778,#194779,#194780); +#194778 = CARTESIAN_POINT('',(201.97844606572,-82.80752258305,1.585)); +#194779 = DIRECTION('',(0.,0.,-1.)); +#194780 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#194781 = ORIENTED_EDGE('',*,*,#194782,.T.); +#194782 = EDGE_CURVE('',#194774,#194783,#194785,.T.); +#194783 = VERTEX_POINT('',#194784); +#194784 = CARTESIAN_POINT('',(202.106796,-82.734593,1.585)); +#194785 = LINE('',#194786,#194787); +#194786 = CARTESIAN_POINT('',(202.03964,-82.765193,1.585)); +#194787 = VECTOR('',#194788,1.); +#194788 = DIRECTION('',(0.90998556975,0.414639919506,0.)); +#194789 = ORIENTED_EDGE('',*,*,#194790,.T.); +#194790 = EDGE_CURVE('',#194783,#194791,#194793,.T.); +#194791 = VERTEX_POINT('',#194792); +#194792 = CARTESIAN_POINT('',(202.278917,-82.734593,1.585)); +#194793 = LINE('',#194794,#194795); +#194794 = CARTESIAN_POINT('',(202.106796,-82.734593,1.585)); +#194795 = VECTOR('',#194796,1.); +#194796 = DIRECTION('',(1.,0.,0.)); +#194797 = ORIENTED_EDGE('',*,*,#194798,.T.); +#194798 = EDGE_CURVE('',#194791,#194799,#194801,.T.); +#194799 = VERTEX_POINT('',#194800); +#194800 = CARTESIAN_POINT('',(202.408777,-82.796521,1.585)); +#194801 = LINE('',#194802,#194803); +#194802 = CARTESIAN_POINT('',(202.278917,-82.734593,1.585)); +#194803 = VECTOR('',#194804,1.); +#194804 = DIRECTION('',(0.902617807283,-0.430442904431,0.)); +#194805 = ORIENTED_EDGE('',*,*,#194806,.T.); +#194806 = EDGE_CURVE('',#194799,#194807,#194809,.T.); +#194807 = VERTEX_POINT('',#194808); +#194808 = CARTESIAN_POINT('',(202.834078,-82.796521,1.585)); +#194809 = CIRCLE('',#194810,0.347106732746); +#194810 = AXIS2_PLACEMENT_3D('',#194811,#194812,#194813); +#194811 = CARTESIAN_POINT('',(202.6214275,-83.07086175302,1.585)); +#194812 = DIRECTION('',(0.,0.,-1.)); +#194813 = DIRECTION('',(-0.612637209073,0.790364251506,0.)); +#194814 = ORIENTED_EDGE('',*,*,#194815,.T.); +#194815 = EDGE_CURVE('',#194807,#194816,#194818,.T.); +#194816 = VERTEX_POINT('',#194817); +#194817 = CARTESIAN_POINT('',(202.855177,-82.82223,1.585)); +#194818 = LINE('',#194819,#194820); +#194819 = CARTESIAN_POINT('',(202.834078,-82.796521,1.585)); +#194820 = VECTOR('',#194821,1.); +#194821 = DIRECTION('',(0.634396319939,-0.773007961956,0.)); +#194822 = ORIENTED_EDGE('',*,*,#194823,.T.); +#194823 = EDGE_CURVE('',#194816,#194824,#194826,.T.); +#194824 = VERTEX_POINT('',#194825); +#194825 = CARTESIAN_POINT('',(202.898074,-83.516487,1.585)); +#194826 = CIRCLE('',#194827,0.780466291444); +#194827 = AXIS2_PLACEMENT_3D('',#194828,#194829,#194830); +#194828 = CARTESIAN_POINT('',(202.1792642213,-83.21244730828,1.585)); +#194829 = DIRECTION('',(0.,0.,-1.)); +#194830 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#194831 = ORIENTED_EDGE('',*,*,#194832,.T.); +#194832 = EDGE_CURVE('',#194824,#194833,#194835,.T.); +#194833 = VERTEX_POINT('',#194834); +#194834 = CARTESIAN_POINT('',(202.877382,-83.537179,1.585)); +#194835 = LINE('',#194836,#194837); +#194836 = CARTESIAN_POINT('',(202.898074,-83.516487,1.585)); +#194837 = VECTOR('',#194838,1.); +#194838 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194839 = ORIENTED_EDGE('',*,*,#194840,.T.); +#194840 = EDGE_CURVE('',#194833,#194841,#194843,.T.); +#194841 = VERTEX_POINT('',#194842); +#194842 = CARTESIAN_POINT('',(202.760714,-83.474819,1.585)); +#194843 = CIRCLE('',#194844,7.49997958033E-02); +#194844 = AXIS2_PLACEMENT_3D('',#194845,#194846,#194847); +#194845 = CARTESIAN_POINT('',(202.8357137958,-83.47481931647,1.585)); +#194846 = DIRECTION('',(-0.,0.,-1.)); +#194847 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#194848 = ORIENTED_EDGE('',*,*,#194849,.T.); +#194849 = EDGE_CURVE('',#194841,#194850,#194852,.T.); +#194850 = VERTEX_POINT('',#194851); +#194851 = CARTESIAN_POINT('',(202.760714,-82.968714,1.585)); +#194852 = LINE('',#194853,#194854); +#194853 = CARTESIAN_POINT('',(202.760714,-83.474819,1.585)); +#194854 = VECTOR('',#194855,1.); +#194855 = DIRECTION('',(0.,1.,0.)); +#194856 = ORIENTED_EDGE('',*,*,#194857,.T.); +#194857 = EDGE_CURVE('',#194850,#194858,#194860,.T.); +#194858 = VERTEX_POINT('',#194859); +#194859 = CARTESIAN_POINT('',(202.732193,-82.911672,1.585)); +#194860 = LINE('',#194861,#194862); +#194861 = CARTESIAN_POINT('',(202.760714,-82.968714,1.585)); +#194862 = VECTOR('',#194863,1.); +#194863 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#194864 = ORIENTED_EDGE('',*,*,#194865,.T.); +#194865 = EDGE_CURVE('',#194858,#194866,#194868,.T.); +#194866 = VERTEX_POINT('',#194867); +#194867 = CARTESIAN_POINT('',(202.510662,-82.911672,1.585)); +#194868 = CIRCLE('',#194869,0.186653372204); +#194869 = AXIS2_PLACEMENT_3D('',#194870,#194871,#194872); +#194870 = CARTESIAN_POINT('',(202.6214275,-83.06190676749,1.585)); +#194871 = DIRECTION('',(0.,0.,1.)); +#194872 = DIRECTION('',(0.593428871348,0.804886435872,-0.)); +#194873 = ORIENTED_EDGE('',*,*,#194874,.T.); +#194874 = EDGE_CURVE('',#194866,#194875,#194877,.T.); +#194875 = VERTEX_POINT('',#194876); +#194876 = CARTESIAN_POINT('',(202.482142,-82.968714,1.585)); +#194877 = LINE('',#194878,#194879); +#194878 = CARTESIAN_POINT('',(202.510662,-82.911672,1.585)); +#194879 = VECTOR('',#194880,1.); +#194880 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#194881 = ORIENTED_EDGE('',*,*,#194882,.T.); +#194882 = EDGE_CURVE('',#194875,#194883,#194885,.T.); +#194883 = VERTEX_POINT('',#194884); +#194884 = CARTESIAN_POINT('',(202.480701,-83.489451,1.585)); +#194885 = LINE('',#194886,#194887); +#194886 = CARTESIAN_POINT('',(202.482142,-82.968714,1.585)); +#194887 = VECTOR('',#194888,1.); +#194888 = DIRECTION('',(-2.767221232121E-03,-0.999996171236,0.)); +#194889 = ORIENTED_EDGE('',*,*,#194890,.T.); +#194890 = EDGE_CURVE('',#194883,#194891,#194893,.T.); +#194891 = VERTEX_POINT('',#194892); +#194892 = CARTESIAN_POINT('',(202.332142,-83.474819,1.585)); +#194893 = CIRCLE('',#194894,7.500006711464E-02); +#194894 = AXIS2_PLACEMENT_3D('',#194895,#194896,#194897); +#194895 = CARTESIAN_POINT('',(202.40714206711,-83.47481906711,1.585)); +#194896 = DIRECTION('',(-0.,0.,-1.)); +#194897 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#194898 = ORIENTED_EDGE('',*,*,#194899,.T.); +#194899 = EDGE_CURVE('',#194891,#194900,#194902,.T.); +#194900 = VERTEX_POINT('',#194901); +#194901 = CARTESIAN_POINT('',(202.332142,-82.968714,1.585)); +#194902 = LINE('',#194903,#194904); +#194903 = CARTESIAN_POINT('',(202.332142,-83.474819,1.585)); +#194904 = VECTOR('',#194905,1.); +#194905 = DIRECTION('',(0.,1.,0.)); +#194906 = ORIENTED_EDGE('',*,*,#194907,.T.); +#194907 = EDGE_CURVE('',#194900,#194908,#194910,.T.); +#194908 = VERTEX_POINT('',#194909); +#194909 = CARTESIAN_POINT('',(202.303621,-82.911672,1.585)); +#194910 = LINE('',#194911,#194912); +#194911 = CARTESIAN_POINT('',(202.332142,-82.968714,1.585)); +#194912 = VECTOR('',#194913,1.); +#194913 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#194914 = ORIENTED_EDGE('',*,*,#194915,.T.); +#194915 = EDGE_CURVE('',#194908,#194916,#194918,.T.); +#194916 = VERTEX_POINT('',#194917); +#194917 = CARTESIAN_POINT('',(202.24658,-82.883152,1.585)); +#194918 = LINE('',#194919,#194920); +#194919 = CARTESIAN_POINT('',(202.303621,-82.911672,1.585)); +#194920 = VECTOR('',#194921,1.); +#194921 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#194922 = ORIENTED_EDGE('',*,*,#194923,.T.); +#194923 = EDGE_CURVE('',#194916,#194924,#194926,.T.); +#194924 = VERTEX_POINT('',#194925); +#194925 = CARTESIAN_POINT('',(202.139133,-82.883152,1.585)); +#194926 = LINE('',#194927,#194928); +#194927 = CARTESIAN_POINT('',(202.24658,-82.883152,1.585)); +#194928 = VECTOR('',#194929,1.); +#194929 = DIRECTION('',(-1.,0.,0.)); +#194930 = ORIENTED_EDGE('',*,*,#194931,.T.); +#194931 = EDGE_CURVE('',#194924,#194932,#194934,.T.); +#194932 = VERTEX_POINT('',#194933); +#194933 = CARTESIAN_POINT('',(202.070617,-82.91741,1.585)); +#194934 = LINE('',#194935,#194936); +#194935 = CARTESIAN_POINT('',(202.139133,-82.883152,1.585)); +#194936 = VECTOR('',#194937,1.); +#194937 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#194938 = ORIENTED_EDGE('',*,*,#194939,.T.); +#194939 = EDGE_CURVE('',#194932,#194940,#194942,.T.); +#194940 = VERTEX_POINT('',#194941); +#194941 = CARTESIAN_POINT('',(202.053571,-82.934456,1.585)); +#194942 = LINE('',#194943,#194944); +#194943 = CARTESIAN_POINT('',(202.070617,-82.91741,1.585)); +#194944 = VECTOR('',#194945,1.); +#194945 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194946 = ORIENTED_EDGE('',*,*,#194947,.T.); +#194947 = EDGE_CURVE('',#194940,#194948,#194950,.T.); +#194948 = VERTEX_POINT('',#194949); +#194949 = CARTESIAN_POINT('',(202.05213,-83.489451,1.585)); +#194950 = LINE('',#194951,#194952); +#194951 = CARTESIAN_POINT('',(202.053571,-82.934456,1.585)); +#194952 = VECTOR('',#194953,1.); +#194953 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#194954 = ORIENTED_EDGE('',*,*,#194955,.T.); +#194955 = EDGE_CURVE('',#194948,#194956,#194958,.T.); +#194956 = VERTEX_POINT('',#194957); +#194957 = CARTESIAN_POINT('',(201.903571,-83.474819,1.585)); +#194958 = CIRCLE('',#194959,7.500006711465E-02); +#194959 = AXIS2_PLACEMENT_3D('',#194960,#194961,#194962); +#194960 = CARTESIAN_POINT('',(201.97857106711,-83.47481906711,1.585)); +#194961 = DIRECTION('',(-0.,0.,-1.)); +#194962 = DIRECTION('',(0.980784894138,-0.195092263892,-0.)); +#194963 = ORIENTED_EDGE('',*,*,#194964,.T.); +#194964 = EDGE_CURVE('',#194956,#194965,#194967,.T.); +#194965 = VERTEX_POINT('',#194966); +#194966 = CARTESIAN_POINT('',(201.905012,-82.79352,1.585)); +#194967 = LINE('',#194968,#194969); +#194968 = CARTESIAN_POINT('',(201.903571,-83.474819,1.585)); +#194969 = VECTOR('',#194970,1.); +#194970 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#194971 = ORIENTED_EDGE('',*,*,#194972,.T.); +#194972 = EDGE_CURVE('',#194965,#194973,#194975,.T.); +#194973 = VERTEX_POINT('',#194974); +#194974 = CARTESIAN_POINT('',(201.916211,-82.766484,1.585)); +#194975 = LINE('',#194976,#194977); +#194976 = CARTESIAN_POINT('',(201.905012,-82.79352,1.585)); +#194977 = VECTOR('',#194978,1.); +#194978 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194979 = ORIENTED_EDGE('',*,*,#194980,.T.); +#194980 = EDGE_CURVE('',#194973,#194772,#194981,.T.); +#194981 = LINE('',#194982,#194983); +#194982 = CARTESIAN_POINT('',(201.916211,-82.766484,1.585)); +#194983 = VECTOR('',#194984,1.); +#194984 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#194985 = PLANE('',#194986); +#194986 = AXIS2_PLACEMENT_3D('',#194987,#194988,#194989); +#194987 = CARTESIAN_POINT('',(0.,0.,1.585)); +#194988 = DIRECTION('',(0.,0.,1.)); +#194989 = DIRECTION('',(1.,0.,-0.)); +#194990 = SHELL_BASED_SURFACE_MODEL('',(#194991)); +#194991 = OPEN_SHELL('',(#194992)); +#194992 = ADVANCED_FACE('',(#194993,#195165),#195216,.T.); +#194993 = FACE_BOUND('',#194994,.F.); +#194994 = EDGE_LOOP('',(#194995,#195006,#195014,#195022,#195030,#195038, + #195046,#195054,#195062,#195070,#195078,#195086,#195094,#195103, + #195111,#195119,#195127,#195135,#195143,#195151,#195159)); +#194995 = ORIENTED_EDGE('',*,*,#194996,.T.); +#194996 = EDGE_CURVE('',#194997,#194999,#195001,.T.); +#194997 = VERTEX_POINT('',#194998); +#194998 = CARTESIAN_POINT('',(203.802173,-82.788689,1.585)); +#194999 = VERTEX_POINT('',#195000); +#195000 = CARTESIAN_POINT('',(204.26265,-82.796521,1.585)); +#195001 = CIRCLE('',#195002,0.398777683503); +#195002 = AXIS2_PLACEMENT_3D('',#195003,#195004,#195005); +#195003 = CARTESIAN_POINT('',(204.02687478885,-83.11813208604,1.585)); +#195004 = DIRECTION('',(0.,0.,-1.)); +#195005 = DIRECTION('',(-0.563476338197,0.826132202673,0.)); +#195006 = ORIENTED_EDGE('',*,*,#195007,.T.); +#195007 = EDGE_CURVE('',#194999,#195008,#195010,.T.); +#195008 = VERTEX_POINT('',#195009); +#195009 = CARTESIAN_POINT('',(204.283748,-82.82223,1.585)); +#195010 = LINE('',#195011,#195012); +#195011 = CARTESIAN_POINT('',(204.26265,-82.796521,1.585)); +#195012 = VECTOR('',#195013,1.); +#195013 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#195014 = ORIENTED_EDGE('',*,*,#195015,.T.); +#195015 = EDGE_CURVE('',#195008,#195016,#195018,.T.); +#195016 = VERTEX_POINT('',#195017); +#195017 = CARTESIAN_POINT('',(204.337844,-82.936377,1.585)); +#195018 = LINE('',#195019,#195020); +#195019 = CARTESIAN_POINT('',(204.283748,-82.82223,1.585)); +#195020 = VECTOR('',#195021,1.); +#195021 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#195022 = ORIENTED_EDGE('',*,*,#195023,.T.); +#195023 = EDGE_CURVE('',#195016,#195024,#195026,.T.); +#195024 = VERTEX_POINT('',#195025); +#195025 = CARTESIAN_POINT('',(204.337844,-83.060879,1.585)); +#195026 = LINE('',#195027,#195028); +#195027 = CARTESIAN_POINT('',(204.337844,-82.936377,1.585)); +#195028 = VECTOR('',#195029,1.); +#195029 = DIRECTION('',(0.,-1.,0.)); +#195030 = ORIENTED_EDGE('',*,*,#195031,.T.); +#195031 = EDGE_CURVE('',#195024,#195032,#195034,.T.); +#195032 = VERTEX_POINT('',#195033); +#195033 = CARTESIAN_POINT('',(204.317373,-83.099224,1.585)); +#195034 = LINE('',#195035,#195036); +#195035 = CARTESIAN_POINT('',(204.337844,-83.060879,1.585)); +#195036 = VECTOR('',#195037,1.); +#195037 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#195038 = ORIENTED_EDGE('',*,*,#195039,.T.); +#195039 = EDGE_CURVE('',#195032,#195040,#195042,.T.); +#195040 = VERTEX_POINT('',#195041); +#195041 = CARTESIAN_POINT('',(204.278993,-83.119791,1.585)); +#195042 = LINE('',#195043,#195044); +#195043 = CARTESIAN_POINT('',(204.317373,-83.099224,1.585)); +#195044 = VECTOR('',#195045,1.); +#195045 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#195046 = ORIENTED_EDGE('',*,*,#195047,.T.); +#195047 = EDGE_CURVE('',#195040,#195048,#195050,.T.); +#195048 = VERTEX_POINT('',#195049); +#195049 = CARTESIAN_POINT('',(203.863095,-83.20297,1.585)); +#195050 = LINE('',#195051,#195052); +#195051 = CARTESIAN_POINT('',(204.278993,-83.119791,1.585)); +#195052 = VECTOR('',#195053,1.); +#195053 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#195054 = ORIENTED_EDGE('',*,*,#195055,.T.); +#195055 = EDGE_CURVE('',#195048,#195056,#195058,.T.); +#195056 = VERTEX_POINT('',#195057); +#195057 = CARTESIAN_POINT('',(203.863095,-83.314256,1.585)); +#195058 = LINE('',#195059,#195060); +#195059 = CARTESIAN_POINT('',(203.863095,-83.20297,1.585)); +#195060 = VECTOR('',#195061,1.); +#195061 = DIRECTION('',(0.,-1.,0.)); +#195062 = ORIENTED_EDGE('',*,*,#195063,.T.); +#195063 = EDGE_CURVE('',#195056,#195064,#195066,.T.); +#195064 = VERTEX_POINT('',#195065); +#195065 = CARTESIAN_POINT('',(203.891615,-83.371298,1.585)); +#195066 = LINE('',#195067,#195068); +#195067 = CARTESIAN_POINT('',(203.863095,-83.314256,1.585)); +#195068 = VECTOR('',#195069,1.); +#195069 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#195070 = ORIENTED_EDGE('',*,*,#195071,.T.); +#195071 = EDGE_CURVE('',#195064,#195072,#195074,.T.); +#195072 = VERTEX_POINT('',#195073); +#195073 = CARTESIAN_POINT('',(203.948657,-83.399819,1.585)); +#195074 = LINE('',#195075,#195076); +#195075 = CARTESIAN_POINT('',(203.891615,-83.371298,1.585)); +#195076 = VECTOR('',#195077,1.); +#195077 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#195078 = ORIENTED_EDGE('',*,*,#195079,.T.); +#195079 = EDGE_CURVE('',#195072,#195080,#195082,.T.); +#195080 = VERTEX_POINT('',#195081); +#195081 = CARTESIAN_POINT('',(204.103723,-83.399819,1.585)); +#195082 = LINE('',#195083,#195084); +#195083 = CARTESIAN_POINT('',(203.948657,-83.399819,1.585)); +#195084 = VECTOR('',#195085,1.); +#195085 = DIRECTION('',(1.,0.,0.)); +#195086 = ORIENTED_EDGE('',*,*,#195087,.T.); +#195087 = EDGE_CURVE('',#195080,#195088,#195090,.T.); +#195088 = VERTEX_POINT('',#195089); +#195089 = CARTESIAN_POINT('',(204.196856,-83.354863,1.585)); +#195090 = LINE('',#195091,#195092); +#195091 = CARTESIAN_POINT('',(204.103723,-83.399819,1.585)); +#195092 = VECTOR('',#195093,1.); +#195093 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#195094 = ORIENTED_EDGE('',*,*,#195095,.T.); +#195095 = EDGE_CURVE('',#195088,#195096,#195098,.T.); +#195096 = VERTEX_POINT('',#195097); +#195097 = CARTESIAN_POINT('',(204.250207,-83.494282,1.585)); +#195098 = CIRCLE('',#195099,7.500029440469E-02); +#195099 = AXIS2_PLACEMENT_3D('',#195100,#195101,#195102); +#195100 = CARTESIAN_POINT('',(204.21666535132,-83.42719994603,1.585)); +#195101 = DIRECTION('',(0.,0.,-1.)); +#195102 = DIRECTION('',(-0.264123647521,0.964488827732,-0.)); +#195103 = ORIENTED_EDGE('',*,*,#195104,.T.); +#195104 = EDGE_CURVE('',#195096,#195105,#195107,.T.); +#195105 = VERTEX_POINT('',#195106); +#195106 = CARTESIAN_POINT('',(204.13606,-83.548378,1.585)); +#195107 = LINE('',#195108,#195109); +#195108 = CARTESIAN_POINT('',(204.250207,-83.494282,1.585)); +#195109 = VECTOR('',#195110,1.); +#195110 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#195111 = ORIENTED_EDGE('',*,*,#195112,.T.); +#195112 = EDGE_CURVE('',#195105,#195113,#195115,.T.); +#195113 = VERTEX_POINT('',#195114); +#195114 = CARTESIAN_POINT('',(203.911142,-83.547156,1.585)); +#195115 = LINE('',#195116,#195117); +#195116 = CARTESIAN_POINT('',(204.13606,-83.548378,1.585)); +#195117 = VECTOR('',#195118,1.); +#195118 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#195119 = ORIENTED_EDGE('',*,*,#195120,.T.); +#195120 = EDGE_CURVE('',#195113,#195121,#195123,.T.); +#195121 = VERTEX_POINT('',#195122); +#195122 = CARTESIAN_POINT('',(203.78973,-83.48645,1.585)); +#195123 = LINE('',#195124,#195125); +#195124 = CARTESIAN_POINT('',(203.911142,-83.547156,1.585)); +#195125 = VECTOR('',#195126,1.); +#195126 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#195127 = ORIENTED_EDGE('',*,*,#195128,.T.); +#195128 = EDGE_CURVE('',#195121,#195129,#195131,.T.); +#195129 = VERTEX_POINT('',#195130); +#195130 = CARTESIAN_POINT('',(203.768632,-83.460741,1.585)); +#195131 = LINE('',#195132,#195133); +#195132 = CARTESIAN_POINT('',(203.78973,-83.48645,1.585)); +#195133 = VECTOR('',#195134,1.); +#195134 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#195135 = ORIENTED_EDGE('',*,*,#195136,.T.); +#195136 = EDGE_CURVE('',#195129,#195137,#195139,.T.); +#195137 = VERTEX_POINT('',#195138); +#195138 = CARTESIAN_POINT('',(203.714536,-83.346593,1.585)); +#195139 = LINE('',#195140,#195141); +#195140 = CARTESIAN_POINT('',(203.768632,-83.460741,1.585)); +#195141 = VECTOR('',#195142,1.); +#195142 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#195143 = ORIENTED_EDGE('',*,*,#195144,.T.); +#195144 = EDGE_CURVE('',#195137,#195145,#195147,.T.); +#195145 = VERTEX_POINT('',#195146); +#195146 = CARTESIAN_POINT('',(203.715758,-82.9312,1.585)); +#195147 = LINE('',#195148,#195149); +#195148 = CARTESIAN_POINT('',(203.714536,-83.346593,1.585)); +#195149 = VECTOR('',#195150,1.); +#195150 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#195151 = ORIENTED_EDGE('',*,*,#195152,.T.); +#195152 = EDGE_CURVE('',#195145,#195153,#195155,.T.); +#195153 = VERTEX_POINT('',#195154); +#195154 = CARTESIAN_POINT('',(203.776464,-82.809787,1.585)); +#195155 = LINE('',#195156,#195157); +#195156 = CARTESIAN_POINT('',(203.715758,-82.9312,1.585)); +#195157 = VECTOR('',#195158,1.); +#195158 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#195159 = ORIENTED_EDGE('',*,*,#195160,.T.); +#195160 = EDGE_CURVE('',#195153,#194997,#195161,.T.); +#195161 = LINE('',#195162,#195163); +#195162 = CARTESIAN_POINT('',(203.776464,-82.809787,1.585)); +#195163 = VECTOR('',#195164,1.); +#195164 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#195165 = FACE_BOUND('',#195166,.F.); +#195166 = EDGE_LOOP('',(#195167,#195178,#195186,#195194,#195202,#195210) + ); +#195167 = ORIENTED_EDGE('',*,*,#195168,.T.); +#195168 = EDGE_CURVE('',#195169,#195171,#195173,.T.); +#195169 = VERTEX_POINT('',#195170); +#195170 = CARTESIAN_POINT('',(204.160764,-82.911672,1.585)); +#195171 = VERTEX_POINT('',#195172); +#195172 = CARTESIAN_POINT('',(203.891615,-82.911672,1.585)); +#195173 = CIRCLE('',#195174,0.239283669194); +#195174 = AXIS2_PLACEMENT_3D('',#195175,#195176,#195177); +#195175 = CARTESIAN_POINT('',(204.0261895,-83.10952643713,1.585)); +#195176 = DIRECTION('',(0.,0.,1.)); +#195177 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#195178 = ORIENTED_EDGE('',*,*,#195179,.T.); +#195179 = EDGE_CURVE('',#195171,#195180,#195182,.T.); +#195180 = VERTEX_POINT('',#195181); +#195181 = CARTESIAN_POINT('',(203.863095,-82.968714,1.585)); +#195182 = LINE('',#195183,#195184); +#195183 = CARTESIAN_POINT('',(203.891615,-82.911672,1.585)); +#195184 = VECTOR('',#195185,1.); +#195185 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#195186 = ORIENTED_EDGE('',*,*,#195187,.T.); +#195187 = EDGE_CURVE('',#195180,#195188,#195190,.T.); +#195188 = VERTEX_POINT('',#195189); +#195189 = CARTESIAN_POINT('',(203.863095,-83.049999,1.585)); +#195190 = LINE('',#195191,#195192); +#195191 = CARTESIAN_POINT('',(203.863095,-82.968714,1.585)); +#195192 = VECTOR('',#195193,1.); +#195193 = DIRECTION('',(0.,-1.,0.)); +#195194 = ORIENTED_EDGE('',*,*,#195195,.T.); +#195195 = EDGE_CURVE('',#195188,#195196,#195198,.T.); +#195196 = VERTEX_POINT('',#195197); +#195197 = CARTESIAN_POINT('',(204.189285,-82.984762,1.585)); +#195198 = LINE('',#195199,#195200); +#195199 = CARTESIAN_POINT('',(203.863095,-83.049999,1.585)); +#195200 = VECTOR('',#195201,1.); +#195201 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#195202 = ORIENTED_EDGE('',*,*,#195203,.T.); +#195203 = EDGE_CURVE('',#195196,#195204,#195206,.T.); +#195204 = VERTEX_POINT('',#195205); +#195205 = CARTESIAN_POINT('',(204.189285,-82.968714,1.585)); +#195206 = LINE('',#195207,#195208); +#195207 = CARTESIAN_POINT('',(204.189285,-82.984762,1.585)); +#195208 = VECTOR('',#195209,1.); +#195209 = DIRECTION('',(0.,1.,0.)); +#195210 = ORIENTED_EDGE('',*,*,#195211,.T.); +#195211 = EDGE_CURVE('',#195204,#195169,#195212,.T.); +#195212 = LINE('',#195213,#195214); +#195213 = CARTESIAN_POINT('',(204.189285,-82.968714,1.585)); +#195214 = VECTOR('',#195215,1.); +#195215 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#195216 = PLANE('',#195217); +#195217 = AXIS2_PLACEMENT_3D('',#195218,#195219,#195220); +#195218 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195219 = DIRECTION('',(0.,0.,1.)); +#195220 = DIRECTION('',(1.,0.,-0.)); +#195221 = SHELL_BASED_SURFACE_MODEL('',(#195222)); +#195222 = OPEN_SHELL('',(#195223)); +#195223 = ADVANCED_FACE('',(#195224,#195326),#195394,.T.); +#195224 = FACE_BOUND('',#195225,.F.); +#195225 = EDGE_LOOP('',(#195226,#195237,#195245,#195254,#195262,#195270, + #195279,#195287,#195296,#195304,#195312,#195320)); +#195226 = ORIENTED_EDGE('',*,*,#195227,.T.); +#195227 = EDGE_CURVE('',#195228,#195230,#195232,.T.); +#195228 = VERTEX_POINT('',#195229); +#195229 = CARTESIAN_POINT('',(205.07976,-82.412459,1.585)); +#195230 = VERTEX_POINT('',#195231); +#195231 = CARTESIAN_POINT('',(205.196428,-82.474819,1.585)); +#195232 = CIRCLE('',#195233,7.500000000003E-02); +#195233 = AXIS2_PLACEMENT_3D('',#195234,#195235,#195236); +#195234 = CARTESIAN_POINT('',(205.121428,-82.47481906555,1.585)); +#195235 = DIRECTION('',(0.,0.,-1.)); +#195236 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#195237 = ORIENTED_EDGE('',*,*,#195238,.T.); +#195238 = EDGE_CURVE('',#195230,#195239,#195241,.T.); +#195239 = VERTEX_POINT('',#195240); +#195240 = CARTESIAN_POINT('',(205.194987,-83.489451,1.585)); +#195241 = LINE('',#195242,#195243); +#195242 = CARTESIAN_POINT('',(205.196428,-82.474819,1.585)); +#195243 = VECTOR('',#195244,1.); +#195244 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#195245 = ORIENTED_EDGE('',*,*,#195246,.T.); +#195246 = EDGE_CURVE('',#195239,#195247,#195249,.T.); +#195247 = VERTEX_POINT('',#195248); +#195248 = CARTESIAN_POINT('',(205.076231,-83.53365,1.585)); +#195249 = CIRCLE('',#195250,7.4246560927E-02); +#195250 = AXIS2_PLACEMENT_3D('',#195251,#195252,#195253); +#195251 = CARTESIAN_POINT('',(205.12210685331,-83.47527228256,1.585)); +#195252 = DIRECTION('',(-0.,0.,-1.)); +#195253 = DIRECTION('',(0.981596262232,-0.190968002485,-0.)); +#195254 = ORIENTED_EDGE('',*,*,#195255,.T.); +#195255 = EDGE_CURVE('',#195247,#195256,#195258,.T.); +#195256 = VERTEX_POINT('',#195257); +#195257 = CARTESIAN_POINT('',(205.040822,-83.548378,1.585)); +#195258 = LINE('',#195259,#195260); +#195259 = CARTESIAN_POINT('',(205.076231,-83.53365,1.585)); +#195260 = VECTOR('',#195261,1.); +#195261 = DIRECTION('',(-0.923315130307,-0.384043187866,0.)); +#195262 = ORIENTED_EDGE('',*,*,#195263,.T.); +#195263 = EDGE_CURVE('',#195256,#195264,#195266,.T.); +#195264 = VERTEX_POINT('',#195265); +#195265 = CARTESIAN_POINT('',(204.815904,-83.547156,1.585)); +#195266 = LINE('',#195267,#195268); +#195267 = CARTESIAN_POINT('',(205.040822,-83.548378,1.585)); +#195268 = VECTOR('',#195269,1.); +#195269 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#195270 = ORIENTED_EDGE('',*,*,#195271,.T.); +#195271 = EDGE_CURVE('',#195264,#195272,#195274,.T.); +#195272 = VERTEX_POINT('',#195273); +#195273 = CARTESIAN_POINT('',(204.571679,-83.298974,1.585)); +#195274 = CIRCLE('',#195275,0.348628446662); +#195275 = AXIS2_PLACEMENT_3D('',#195276,#195277,#195278); +#195276 = CARTESIAN_POINT('',(204.90907961322,-83.21120942847,1.585)); +#195277 = DIRECTION('',(0.,0.,-1.)); +#195278 = DIRECTION('',(-0.267263369125,-0.963623521674,-0.)); +#195279 = ORIENTED_EDGE('',*,*,#195280,.T.); +#195280 = EDGE_CURVE('',#195272,#195281,#195283,.T.); +#195281 = VERTEX_POINT('',#195282); +#195282 = CARTESIAN_POINT('',(204.572901,-82.978819,1.585)); +#195283 = LINE('',#195284,#195285); +#195284 = CARTESIAN_POINT('',(204.571679,-83.298974,1.585)); +#195285 = VECTOR('',#195286,1.); +#195286 = DIRECTION('',(3.81687338512E-03,0.999992715712,0.)); +#195287 = ORIENTED_EDGE('',*,*,#195288,.T.); +#195288 = EDGE_CURVE('',#195281,#195289,#195291,.T.); +#195289 = VERTEX_POINT('',#195290); +#195290 = CARTESIAN_POINT('',(204.821082,-82.734593,1.585)); +#195291 = CIRCLE('',#195292,0.3486213829); +#195292 = AXIS2_PLACEMENT_3D('',#195293,#195294,#195295); +#195293 = CARTESIAN_POINT('',(204.90884222951,-83.07198744383,1.585)); +#195294 = DIRECTION('',(0.,0.,-1.)); +#195295 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#195296 = ORIENTED_EDGE('',*,*,#195297,.T.); +#195297 = EDGE_CURVE('',#195289,#195298,#195300,.T.); +#195298 = VERTEX_POINT('',#195299); +#195299 = CARTESIAN_POINT('',(205.046428,-82.735979,1.585)); +#195300 = LINE('',#195301,#195302); +#195301 = CARTESIAN_POINT('',(204.821082,-82.734593,1.585)); +#195302 = VECTOR('',#195303,1.); +#195303 = DIRECTION('',(0.999981085954,-6.150425501802E-03,0.)); +#195304 = ORIENTED_EDGE('',*,*,#195305,.T.); +#195305 = EDGE_CURVE('',#195298,#195306,#195308,.T.); +#195306 = VERTEX_POINT('',#195307); +#195307 = CARTESIAN_POINT('',(205.047869,-82.460187,1.585)); +#195308 = LINE('',#195309,#195310); +#195309 = CARTESIAN_POINT('',(205.046428,-82.735979,1.585)); +#195310 = VECTOR('',#195311,1.); +#195311 = DIRECTION('',(5.22488081838E-03,0.999986350217,0.)); +#195312 = ORIENTED_EDGE('',*,*,#195313,.T.); +#195313 = EDGE_CURVE('',#195306,#195314,#195316,.T.); +#195314 = VERTEX_POINT('',#195315); +#195315 = CARTESIAN_POINT('',(205.059068,-82.433151,1.585)); +#195316 = LINE('',#195317,#195318); +#195317 = CARTESIAN_POINT('',(205.047869,-82.460187,1.585)); +#195318 = VECTOR('',#195319,1.); +#195319 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#195320 = ORIENTED_EDGE('',*,*,#195321,.T.); +#195321 = EDGE_CURVE('',#195314,#195228,#195322,.T.); +#195322 = LINE('',#195323,#195324); +#195323 = CARTESIAN_POINT('',(205.059068,-82.433151,1.585)); +#195324 = VECTOR('',#195325,1.); +#195325 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#195326 = FACE_BOUND('',#195327,.F.); +#195327 = EDGE_LOOP('',(#195328,#195338,#195346,#195355,#195363,#195372, + #195380,#195388)); +#195328 = ORIENTED_EDGE('',*,*,#195329,.T.); +#195329 = EDGE_CURVE('',#195330,#195332,#195334,.T.); +#195330 = VERTEX_POINT('',#195331); +#195331 = CARTESIAN_POINT('',(205.046428,-82.902123,1.585)); +#195332 = VERTEX_POINT('',#195333); +#195333 = CARTESIAN_POINT('',(205.008485,-82.883152,1.585)); +#195334 = LINE('',#195335,#195336); +#195335 = CARTESIAN_POINT('',(205.046428,-82.902123,1.585)); +#195336 = VECTOR('',#195337,1.); +#195337 = DIRECTION('',(-0.894431905558,0.447204166259,0.)); +#195338 = ORIENTED_EDGE('',*,*,#195339,.T.); +#195339 = EDGE_CURVE('',#195332,#195340,#195342,.T.); +#195340 = VERTEX_POINT('',#195341); +#195341 = CARTESIAN_POINT('',(204.853419,-82.883152,1.585)); +#195342 = LINE('',#195343,#195344); +#195343 = CARTESIAN_POINT('',(205.008485,-82.883152,1.585)); +#195344 = VECTOR('',#195345,1.); +#195345 = DIRECTION('',(-1.,0.,0.)); +#195346 = ORIENTED_EDGE('',*,*,#195347,.T.); +#195347 = EDGE_CURVE('',#195340,#195348,#195350,.T.); +#195348 = VERTEX_POINT('',#195349); +#195349 = CARTESIAN_POINT('',(204.720238,-83.016333,1.585)); +#195350 = CIRCLE('',#195351,0.18686440374); +#195351 = AXIS2_PLACEMENT_3D('',#195352,#195353,#195354); +#195352 = CARTESIAN_POINT('',(204.900955,-83.063869,1.585)); +#195353 = DIRECTION('',(0.,0.,1.)); +#195354 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#195355 = ORIENTED_EDGE('',*,*,#195356,.T.); +#195356 = EDGE_CURVE('',#195348,#195357,#195359,.T.); +#195357 = VERTEX_POINT('',#195358); +#195358 = CARTESIAN_POINT('',(204.720238,-83.266637,1.585)); +#195359 = LINE('',#195360,#195361); +#195360 = CARTESIAN_POINT('',(204.720238,-83.016333,1.585)); +#195361 = VECTOR('',#195362,1.); +#195362 = DIRECTION('',(0.,-1.,0.)); +#195363 = ORIENTED_EDGE('',*,*,#195364,.T.); +#195364 = EDGE_CURVE('',#195357,#195365,#195367,.T.); +#195365 = VERTEX_POINT('',#195366); +#195366 = CARTESIAN_POINT('',(204.853419,-83.399819,1.585)); +#195367 = CIRCLE('',#195368,0.186867373533); +#195368 = AXIS2_PLACEMENT_3D('',#195369,#195370,#195371); +#195369 = CARTESIAN_POINT('',(204.90095771388,-83.21909964305,1.585)); +#195370 = DIRECTION('',(0.,0.,1.)); +#195371 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#195372 = ORIENTED_EDGE('',*,*,#195373,.T.); +#195373 = EDGE_CURVE('',#195365,#195374,#195376,.T.); +#195374 = VERTEX_POINT('',#195375); +#195375 = CARTESIAN_POINT('',(205.008485,-83.399819,1.585)); +#195376 = LINE('',#195377,#195378); +#195377 = CARTESIAN_POINT('',(204.853419,-83.399819,1.585)); +#195378 = VECTOR('',#195379,1.); +#195379 = DIRECTION('',(1.,0.,0.)); +#195380 = ORIENTED_EDGE('',*,*,#195381,.T.); +#195381 = EDGE_CURVE('',#195374,#195382,#195384,.T.); +#195382 = VERTEX_POINT('',#195383); +#195383 = CARTESIAN_POINT('',(205.046428,-83.380847,1.585)); +#195384 = LINE('',#195385,#195386); +#195385 = CARTESIAN_POINT('',(205.008485,-83.399819,1.585)); +#195386 = VECTOR('',#195387,1.); +#195387 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#195388 = ORIENTED_EDGE('',*,*,#195389,.T.); +#195389 = EDGE_CURVE('',#195382,#195330,#195390,.T.); +#195390 = LINE('',#195391,#195392); +#195391 = CARTESIAN_POINT('',(205.046428,-83.380847,1.585)); +#195392 = VECTOR('',#195393,1.); +#195393 = DIRECTION('',(0.,1.,0.)); +#195394 = PLANE('',#195395); +#195395 = AXIS2_PLACEMENT_3D('',#195396,#195397,#195398); +#195396 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195397 = DIRECTION('',(0.,0.,1.)); +#195398 = DIRECTION('',(1.,0.,-0.)); +#195399 = SHELL_BASED_SURFACE_MODEL('',(#195400)); +#195400 = OPEN_SHELL('',(#195401)); +#195401 = ADVANCED_FACE('',(#195402),#195504,.T.); +#195402 = FACE_BOUND('',#195403,.F.); +#195403 = EDGE_LOOP('',(#195404,#195414,#195423,#195431,#195439,#195448, + #195456,#195464,#195473,#195481,#195489,#195498)); +#195404 = ORIENTED_EDGE('',*,*,#195405,.T.); +#195405 = EDGE_CURVE('',#195406,#195408,#195410,.T.); +#195406 = VERTEX_POINT('',#195407); +#195407 = CARTESIAN_POINT('',(148.259596,-83.071878,1.585)); +#195408 = VERTEX_POINT('',#195409); +#195409 = CARTESIAN_POINT('',(148.673541,-82.795916,1.585)); +#195410 = LINE('',#195411,#195412); +#195411 = CARTESIAN_POINT('',(148.259596,-83.071878,1.585)); +#195412 = VECTOR('',#195413,1.); +#195413 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#195414 = ORIENTED_EDGE('',*,*,#195415,.T.); +#195415 = EDGE_CURVE('',#195408,#195416,#195418,.T.); +#195416 = VERTEX_POINT('',#195417); +#195417 = CARTESIAN_POINT('',(148.745652,-82.904082,1.585)); +#195418 = CIRCLE('',#195419,6.499976899535E-02); +#195419 = AXIS2_PLACEMENT_3D('',#195420,#195421,#195422); +#195420 = CARTESIAN_POINT('',(148.70959612917,-82.84999924722,1.585)); +#195421 = DIRECTION('',(0.,0.,-1.)); +#195422 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#195423 = ORIENTED_EDGE('',*,*,#195424,.T.); +#195424 = EDGE_CURVE('',#195416,#195425,#195427,.T.); +#195425 = VERTEX_POINT('',#195426); +#195426 = CARTESIAN_POINT('',(148.376776,-83.149999,1.585)); +#195427 = LINE('',#195428,#195429); +#195428 = CARTESIAN_POINT('',(148.745652,-82.904082,1.585)); +#195429 = VECTOR('',#195430,1.); +#195430 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#195431 = ORIENTED_EDGE('',*,*,#195432,.T.); +#195432 = EDGE_CURVE('',#195425,#195433,#195435,.T.); +#195433 = VERTEX_POINT('',#195434); +#195434 = CARTESIAN_POINT('',(148.745652,-83.395916,1.585)); +#195435 = LINE('',#195436,#195437); +#195436 = CARTESIAN_POINT('',(148.376776,-83.149999,1.585)); +#195437 = VECTOR('',#195438,1.); +#195438 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#195439 = ORIENTED_EDGE('',*,*,#195440,.T.); +#195440 = EDGE_CURVE('',#195433,#195441,#195443,.T.); +#195441 = VERTEX_POINT('',#195442); +#195442 = CARTESIAN_POINT('',(148.673541,-83.504082,1.585)); +#195443 = CIRCLE('',#195444,6.49997689954E-02); +#195444 = AXIS2_PLACEMENT_3D('',#195445,#195446,#195447); +#195445 = CARTESIAN_POINT('',(148.70959687747,-83.44999925164,1.585)); +#195446 = DIRECTION('',(0.,0.,-1.)); +#195447 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#195448 = ORIENTED_EDGE('',*,*,#195449,.T.); +#195449 = EDGE_CURVE('',#195441,#195450,#195452,.T.); +#195450 = VERTEX_POINT('',#195451); +#195451 = CARTESIAN_POINT('',(148.259596,-83.228119,1.585)); +#195452 = LINE('',#195453,#195454); +#195453 = CARTESIAN_POINT('',(148.673541,-83.504082,1.585)); +#195454 = VECTOR('',#195455,1.); +#195455 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#195456 = ORIENTED_EDGE('',*,*,#195457,.T.); +#195457 = EDGE_CURVE('',#195450,#195458,#195460,.T.); +#195458 = VERTEX_POINT('',#195459); +#195459 = CARTESIAN_POINT('',(147.845653,-83.504082,1.585)); +#195460 = LINE('',#195461,#195462); +#195461 = CARTESIAN_POINT('',(148.259596,-83.228119,1.585)); +#195462 = VECTOR('',#195463,1.); +#195463 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#195464 = ORIENTED_EDGE('',*,*,#195465,.T.); +#195465 = EDGE_CURVE('',#195458,#195466,#195468,.T.); +#195466 = VERTEX_POINT('',#195467); +#195467 = CARTESIAN_POINT('',(147.773541,-83.395916,1.585)); +#195468 = CIRCLE('',#195469,6.500004634766E-02); +#195469 = AXIS2_PLACEMENT_3D('',#195470,#195471,#195472); +#195470 = CARTESIAN_POINT('',(147.80959737004,-83.4499987533,1.585)); +#195471 = DIRECTION('',(0.,0.,-1.)); +#195472 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#195473 = ORIENTED_EDGE('',*,*,#195474,.T.); +#195474 = EDGE_CURVE('',#195466,#195475,#195477,.T.); +#195475 = VERTEX_POINT('',#195476); +#195476 = CARTESIAN_POINT('',(148.142416,-83.149999,1.585)); +#195477 = LINE('',#195478,#195479); +#195478 = CARTESIAN_POINT('',(147.773541,-83.395916,1.585)); +#195479 = VECTOR('',#195480,1.); +#195480 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#195481 = ORIENTED_EDGE('',*,*,#195482,.T.); +#195482 = EDGE_CURVE('',#195475,#195483,#195485,.T.); +#195483 = VERTEX_POINT('',#195484); +#195484 = CARTESIAN_POINT('',(147.773541,-82.904082,1.585)); +#195485 = LINE('',#195486,#195487); +#195486 = CARTESIAN_POINT('',(148.142416,-83.149999,1.585)); +#195487 = VECTOR('',#195488,1.); +#195488 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#195489 = ORIENTED_EDGE('',*,*,#195490,.T.); +#195490 = EDGE_CURVE('',#195483,#195491,#195493,.T.); +#195491 = VERTEX_POINT('',#195492); +#195492 = CARTESIAN_POINT('',(147.845653,-82.795916,1.585)); +#195493 = CIRCLE('',#195494,6.500004634723E-02); +#195494 = AXIS2_PLACEMENT_3D('',#195495,#195496,#195497); +#195495 = CARTESIAN_POINT('',(147.80959731405,-82.84999920937,1.585)); +#195496 = DIRECTION('',(0.,0.,-1.)); +#195497 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#195498 = ORIENTED_EDGE('',*,*,#195499,.T.); +#195499 = EDGE_CURVE('',#195491,#195406,#195500,.T.); +#195500 = LINE('',#195501,#195502); +#195501 = CARTESIAN_POINT('',(147.845653,-82.795916,1.585)); +#195502 = VECTOR('',#195503,1.); +#195503 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#195504 = PLANE('',#195505); +#195505 = AXIS2_PLACEMENT_3D('',#195506,#195507,#195508); +#195506 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195507 = DIRECTION('',(0.,0.,1.)); +#195508 = DIRECTION('',(1.,0.,-0.)); +#195509 = SHELL_BASED_SURFACE_MODEL('',(#195510)); +#195510 = OPEN_SHELL('',(#195511)); +#195511 = ADVANCED_FACE('',(#195512),#195614,.T.); +#195512 = FACE_BOUND('',#195513,.F.); +#195513 = EDGE_LOOP('',(#195514,#195524,#195533,#195541,#195549,#195558, + #195566,#195574,#195583,#195591,#195599,#195608)); +#195514 = ORIENTED_EDGE('',*,*,#195515,.T.); +#195515 = EDGE_CURVE('',#195516,#195518,#195520,.T.); +#195516 = VERTEX_POINT('',#195517); +#195517 = CARTESIAN_POINT('',(151.009596,-83.064735,1.585)); +#195518 = VERTEX_POINT('',#195519); +#195519 = CARTESIAN_POINT('',(151.423541,-82.788773,1.585)); +#195520 = LINE('',#195521,#195522); +#195521 = CARTESIAN_POINT('',(151.009596,-83.064735,1.585)); +#195522 = VECTOR('',#195523,1.); +#195523 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#195524 = ORIENTED_EDGE('',*,*,#195525,.T.); +#195525 = EDGE_CURVE('',#195518,#195526,#195528,.T.); +#195526 = VERTEX_POINT('',#195527); +#195527 = CARTESIAN_POINT('',(151.495652,-82.896939,1.585)); +#195528 = CIRCLE('',#195529,6.499976899535E-02); +#195529 = AXIS2_PLACEMENT_3D('',#195530,#195531,#195532); +#195530 = CARTESIAN_POINT('',(151.45959612917,-82.84285624722,1.585)); +#195531 = DIRECTION('',(0.,0.,-1.)); +#195532 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#195533 = ORIENTED_EDGE('',*,*,#195534,.T.); +#195534 = EDGE_CURVE('',#195526,#195535,#195537,.T.); +#195535 = VERTEX_POINT('',#195536); +#195536 = CARTESIAN_POINT('',(151.126776,-83.142856,1.585)); +#195537 = LINE('',#195538,#195539); +#195538 = CARTESIAN_POINT('',(151.495652,-82.896939,1.585)); +#195539 = VECTOR('',#195540,1.); +#195540 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#195541 = ORIENTED_EDGE('',*,*,#195542,.T.); +#195542 = EDGE_CURVE('',#195535,#195543,#195545,.T.); +#195543 = VERTEX_POINT('',#195544); +#195544 = CARTESIAN_POINT('',(151.495652,-83.388773,1.585)); +#195545 = LINE('',#195546,#195547); +#195546 = CARTESIAN_POINT('',(151.126776,-83.142856,1.585)); +#195547 = VECTOR('',#195548,1.); +#195548 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#195549 = ORIENTED_EDGE('',*,*,#195550,.T.); +#195550 = EDGE_CURVE('',#195543,#195551,#195553,.T.); +#195551 = VERTEX_POINT('',#195552); +#195552 = CARTESIAN_POINT('',(151.423541,-83.496939,1.585)); +#195553 = CIRCLE('',#195554,6.49997689954E-02); +#195554 = AXIS2_PLACEMENT_3D('',#195555,#195556,#195557); +#195555 = CARTESIAN_POINT('',(151.45959687747,-83.44285625164,1.585)); +#195556 = DIRECTION('',(0.,0.,-1.)); +#195557 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#195558 = ORIENTED_EDGE('',*,*,#195559,.T.); +#195559 = EDGE_CURVE('',#195551,#195560,#195562,.T.); +#195560 = VERTEX_POINT('',#195561); +#195561 = CARTESIAN_POINT('',(151.009596,-83.220976,1.585)); +#195562 = LINE('',#195563,#195564); +#195563 = CARTESIAN_POINT('',(151.423541,-83.496939,1.585)); +#195564 = VECTOR('',#195565,1.); +#195565 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#195566 = ORIENTED_EDGE('',*,*,#195567,.T.); +#195567 = EDGE_CURVE('',#195560,#195568,#195570,.T.); +#195568 = VERTEX_POINT('',#195569); +#195569 = CARTESIAN_POINT('',(150.595653,-83.496939,1.585)); +#195570 = LINE('',#195571,#195572); +#195571 = CARTESIAN_POINT('',(151.009596,-83.220976,1.585)); +#195572 = VECTOR('',#195573,1.); +#195573 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#195574 = ORIENTED_EDGE('',*,*,#195575,.T.); +#195575 = EDGE_CURVE('',#195568,#195576,#195578,.T.); +#195576 = VERTEX_POINT('',#195577); +#195577 = CARTESIAN_POINT('',(150.523541,-83.388773,1.585)); +#195578 = CIRCLE('',#195579,6.500004634766E-02); +#195579 = AXIS2_PLACEMENT_3D('',#195580,#195581,#195582); +#195580 = CARTESIAN_POINT('',(150.55959737004,-83.4428557533,1.585)); +#195581 = DIRECTION('',(0.,0.,-1.)); +#195582 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#195583 = ORIENTED_EDGE('',*,*,#195584,.T.); +#195584 = EDGE_CURVE('',#195576,#195585,#195587,.T.); +#195585 = VERTEX_POINT('',#195586); +#195586 = CARTESIAN_POINT('',(150.892416,-83.142856,1.585)); +#195587 = LINE('',#195588,#195589); +#195588 = CARTESIAN_POINT('',(150.523541,-83.388773,1.585)); +#195589 = VECTOR('',#195590,1.); +#195590 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#195591 = ORIENTED_EDGE('',*,*,#195592,.T.); +#195592 = EDGE_CURVE('',#195585,#195593,#195595,.T.); +#195593 = VERTEX_POINT('',#195594); +#195594 = CARTESIAN_POINT('',(150.523541,-82.896939,1.585)); +#195595 = LINE('',#195596,#195597); +#195596 = CARTESIAN_POINT('',(150.892416,-83.142856,1.585)); +#195597 = VECTOR('',#195598,1.); +#195598 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#195599 = ORIENTED_EDGE('',*,*,#195600,.T.); +#195600 = EDGE_CURVE('',#195593,#195601,#195603,.T.); +#195601 = VERTEX_POINT('',#195602); +#195602 = CARTESIAN_POINT('',(150.595653,-82.788773,1.585)); +#195603 = CIRCLE('',#195604,6.500004634723E-02); +#195604 = AXIS2_PLACEMENT_3D('',#195605,#195606,#195607); +#195605 = CARTESIAN_POINT('',(150.55959731405,-82.84285620937,1.585)); +#195606 = DIRECTION('',(0.,0.,-1.)); +#195607 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#195608 = ORIENTED_EDGE('',*,*,#195609,.T.); +#195609 = EDGE_CURVE('',#195601,#195516,#195610,.T.); +#195610 = LINE('',#195611,#195612); +#195611 = CARTESIAN_POINT('',(150.595653,-82.788773,1.585)); +#195612 = VECTOR('',#195613,1.); +#195613 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#195614 = PLANE('',#195615); +#195615 = AXIS2_PLACEMENT_3D('',#195616,#195617,#195618); +#195616 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195617 = DIRECTION('',(0.,0.,1.)); +#195618 = DIRECTION('',(1.,0.,-0.)); +#195619 = SHELL_BASED_SURFACE_MODEL('',(#195620)); +#195620 = OPEN_SHELL('',(#195621)); +#195621 = ADVANCED_FACE('',(#195622),#195741,.T.); +#195622 = FACE_BOUND('',#195623,.F.); +#195623 = EDGE_LOOP('',(#195624,#195635,#195643,#195652,#195660,#195668, + #195676,#195685,#195693,#195701,#195709,#195718,#195726,#195735)); +#195624 = ORIENTED_EDGE('',*,*,#195625,.T.); +#195625 = EDGE_CURVE('',#195626,#195628,#195630,.T.); +#195626 = VERTEX_POINT('',#195627); +#195627 = CARTESIAN_POINT('',(169.813571,-82.459597,1.585)); +#195628 = VERTEX_POINT('',#195629); +#195629 = CARTESIAN_POINT('',(169.878571,-82.394597,1.585)); +#195630 = CIRCLE('',#195631,6.500103935393E-02); +#195631 = AXIS2_PLACEMENT_3D('',#195632,#195633,#195634); +#195632 = CARTESIAN_POINT('',(169.87857203934,-82.45959803934,1.585)); +#195633 = DIRECTION('',(0.,0.,-1.)); +#195634 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#195635 = ORIENTED_EDGE('',*,*,#195636,.T.); +#195636 = EDGE_CURVE('',#195628,#195637,#195639,.T.); +#195637 = VERTEX_POINT('',#195638); +#195638 = CARTESIAN_POINT('',(170.307143,-82.394597,1.585)); +#195639 = LINE('',#195640,#195641); +#195640 = CARTESIAN_POINT('',(169.878571,-82.394597,1.585)); +#195641 = VECTOR('',#195642,1.); +#195642 = DIRECTION('',(1.,0.,0.)); +#195643 = ORIENTED_EDGE('',*,*,#195644,.T.); +#195644 = EDGE_CURVE('',#195637,#195645,#195647,.T.); +#195645 = VERTEX_POINT('',#195646); +#195646 = CARTESIAN_POINT('',(170.307143,-82.524597,1.585)); +#195647 = CIRCLE('',#195648,6.500000000091E-02); +#195648 = AXIS2_PLACEMENT_3D('',#195649,#195650,#195651); +#195649 = CARTESIAN_POINT('',(170.30714265513,-82.459597,1.585)); +#195650 = DIRECTION('',(0.,0.,-1.)); +#195651 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#195652 = ORIENTED_EDGE('',*,*,#195653,.T.); +#195653 = EDGE_CURVE('',#195645,#195654,#195656,.T.); +#195654 = VERTEX_POINT('',#195655); +#195655 = CARTESIAN_POINT('',(169.943571,-82.524597,1.585)); +#195656 = LINE('',#195657,#195658); +#195657 = CARTESIAN_POINT('',(170.307143,-82.524597,1.585)); +#195658 = VECTOR('',#195659,1.); +#195659 = DIRECTION('',(-1.,0.,0.)); +#195660 = ORIENTED_EDGE('',*,*,#195661,.T.); +#195661 = EDGE_CURVE('',#195654,#195662,#195664,.T.); +#195662 = VERTEX_POINT('',#195663); +#195663 = CARTESIAN_POINT('',(169.943571,-82.823168,1.585)); +#195664 = LINE('',#195665,#195666); +#195665 = CARTESIAN_POINT('',(169.943571,-82.524597,1.585)); +#195666 = VECTOR('',#195667,1.); +#195667 = DIRECTION('',(0.,-1.,0.)); +#195668 = ORIENTED_EDGE('',*,*,#195669,.T.); +#195669 = EDGE_CURVE('',#195662,#195670,#195672,.T.); +#195670 = VERTEX_POINT('',#195671); +#195671 = CARTESIAN_POINT('',(170.178571,-82.823168,1.585)); +#195672 = LINE('',#195673,#195674); +#195673 = CARTESIAN_POINT('',(169.943571,-82.823168,1.585)); +#195674 = VECTOR('',#195675,1.); +#195675 = DIRECTION('',(1.,0.,0.)); +#195676 = ORIENTED_EDGE('',*,*,#195677,.T.); +#195677 = EDGE_CURVE('',#195670,#195678,#195680,.T.); +#195678 = VERTEX_POINT('',#195679); +#195679 = CARTESIAN_POINT('',(170.178571,-82.953168,1.585)); +#195680 = CIRCLE('',#195681,6.500000000092E-02); +#195681 = AXIS2_PLACEMENT_3D('',#195682,#195683,#195684); +#195682 = CARTESIAN_POINT('',(170.17857065513,-82.888168,1.585)); +#195683 = DIRECTION('',(0.,0.,-1.)); +#195684 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#195685 = ORIENTED_EDGE('',*,*,#195686,.T.); +#195686 = EDGE_CURVE('',#195678,#195687,#195689,.T.); +#195687 = VERTEX_POINT('',#195688); +#195688 = CARTESIAN_POINT('',(169.943571,-82.953168,1.585)); +#195689 = LINE('',#195690,#195691); +#195690 = CARTESIAN_POINT('',(170.178571,-82.953168,1.585)); +#195691 = VECTOR('',#195692,1.); +#195692 = DIRECTION('',(-1.,0.,0.)); +#195693 = ORIENTED_EDGE('',*,*,#195694,.T.); +#195694 = EDGE_CURVE('',#195687,#195695,#195697,.T.); +#195695 = VERTEX_POINT('',#195696); +#195696 = CARTESIAN_POINT('',(169.943571,-83.294597,1.585)); +#195697 = LINE('',#195698,#195699); +#195698 = CARTESIAN_POINT('',(169.943571,-82.953168,1.585)); +#195699 = VECTOR('',#195700,1.); +#195700 = DIRECTION('',(0.,-1.,0.)); +#195701 = ORIENTED_EDGE('',*,*,#195702,.T.); +#195702 = EDGE_CURVE('',#195695,#195703,#195705,.T.); +#195703 = VERTEX_POINT('',#195704); +#195704 = CARTESIAN_POINT('',(170.307143,-83.294597,1.585)); +#195705 = LINE('',#195706,#195707); +#195706 = CARTESIAN_POINT('',(169.943571,-83.294597,1.585)); +#195707 = VECTOR('',#195708,1.); +#195708 = DIRECTION('',(1.,0.,0.)); +#195709 = ORIENTED_EDGE('',*,*,#195710,.T.); +#195710 = EDGE_CURVE('',#195703,#195711,#195713,.T.); +#195711 = VERTEX_POINT('',#195712); +#195712 = CARTESIAN_POINT('',(170.307143,-83.424597,1.585)); +#195713 = CIRCLE('',#195714,6.500000000091E-02); +#195714 = AXIS2_PLACEMENT_3D('',#195715,#195716,#195717); +#195715 = CARTESIAN_POINT('',(170.30714265513,-83.359597,1.585)); +#195716 = DIRECTION('',(0.,0.,-1.)); +#195717 = DIRECTION('',(5.30565758841E-06,0.999999999986,0.)); +#195718 = ORIENTED_EDGE('',*,*,#195719,.T.); +#195719 = EDGE_CURVE('',#195711,#195720,#195722,.T.); +#195720 = VERTEX_POINT('',#195721); +#195721 = CARTESIAN_POINT('',(169.878571,-83.424597,1.585)); +#195722 = LINE('',#195723,#195724); +#195723 = CARTESIAN_POINT('',(170.307143,-83.424597,1.585)); +#195724 = VECTOR('',#195725,1.); +#195725 = DIRECTION('',(-1.,0.,0.)); +#195726 = ORIENTED_EDGE('',*,*,#195727,.T.); +#195727 = EDGE_CURVE('',#195720,#195728,#195730,.T.); +#195728 = VERTEX_POINT('',#195729); +#195729 = CARTESIAN_POINT('',(169.813571,-83.359597,1.585)); +#195730 = CIRCLE('',#195731,6.500103935388E-02); +#195731 = AXIS2_PLACEMENT_3D('',#195732,#195733,#195734); +#195732 = CARTESIAN_POINT('',(169.87857203934,-83.35959596065,1.585)); +#195733 = DIRECTION('',(0.,0.,-1.)); +#195734 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#195735 = ORIENTED_EDGE('',*,*,#195736,.T.); +#195736 = EDGE_CURVE('',#195728,#195626,#195737,.T.); +#195737 = LINE('',#195738,#195739); +#195738 = CARTESIAN_POINT('',(169.813571,-83.359597,1.585)); +#195739 = VECTOR('',#195740,1.); +#195740 = DIRECTION('',(0.,1.,0.)); +#195741 = PLANE('',#195742); +#195742 = AXIS2_PLACEMENT_3D('',#195743,#195744,#195745); +#195743 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195744 = DIRECTION('',(0.,0.,1.)); +#195745 = DIRECTION('',(1.,0.,-0.)); +#195746 = SHELL_BASED_SURFACE_MODEL('',(#195747)); +#195747 = OPEN_SHELL('',(#195748)); +#195748 = ADVANCED_FACE('',(#195749),#195868,.T.); +#195749 = FACE_BOUND('',#195750,.F.); +#195750 = EDGE_LOOP('',(#195751,#195762,#195770,#195779,#195787,#195795, + #195803,#195812,#195820,#195828,#195836,#195845,#195853,#195862)); +#195751 = ORIENTED_EDGE('',*,*,#195752,.T.); +#195752 = EDGE_CURVE('',#195753,#195755,#195757,.T.); +#195753 = VERTEX_POINT('',#195754); +#195754 = CARTESIAN_POINT('',(171.485,-82.459597,1.585)); +#195755 = VERTEX_POINT('',#195756); +#195756 = CARTESIAN_POINT('',(171.55,-82.394597,1.585)); +#195757 = CIRCLE('',#195758,6.500103935382E-02); +#195758 = AXIS2_PLACEMENT_3D('',#195759,#195760,#195761); +#195759 = CARTESIAN_POINT('',(171.55000103934,-82.45959803934,1.585)); +#195760 = DIRECTION('',(0.,0.,-1.)); +#195761 = DIRECTION('',(-0.999999999872,1.598967539909E-05,0.)); +#195762 = ORIENTED_EDGE('',*,*,#195763,.T.); +#195763 = EDGE_CURVE('',#195755,#195764,#195766,.T.); +#195764 = VERTEX_POINT('',#195765); +#195765 = CARTESIAN_POINT('',(171.978572,-82.394597,1.585)); +#195766 = LINE('',#195767,#195768); +#195767 = CARTESIAN_POINT('',(171.55,-82.394597,1.585)); +#195768 = VECTOR('',#195769,1.); +#195769 = DIRECTION('',(1.,0.,0.)); +#195770 = ORIENTED_EDGE('',*,*,#195771,.T.); +#195771 = EDGE_CURVE('',#195764,#195772,#195774,.T.); +#195772 = VERTEX_POINT('',#195773); +#195773 = CARTESIAN_POINT('',(171.978572,-82.524597,1.585)); +#195774 = CIRCLE('',#195775,6.500000000091E-02); +#195775 = AXIS2_PLACEMENT_3D('',#195776,#195777,#195778); +#195776 = CARTESIAN_POINT('',(171.97857165513,-82.459597,1.585)); +#195777 = DIRECTION('',(0.,0.,-1.)); +#195778 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#195779 = ORIENTED_EDGE('',*,*,#195780,.T.); +#195780 = EDGE_CURVE('',#195772,#195781,#195783,.T.); +#195781 = VERTEX_POINT('',#195782); +#195782 = CARTESIAN_POINT('',(171.615,-82.524597,1.585)); +#195783 = LINE('',#195784,#195785); +#195784 = CARTESIAN_POINT('',(171.978572,-82.524597,1.585)); +#195785 = VECTOR('',#195786,1.); +#195786 = DIRECTION('',(-1.,0.,0.)); +#195787 = ORIENTED_EDGE('',*,*,#195788,.T.); +#195788 = EDGE_CURVE('',#195781,#195789,#195791,.T.); +#195789 = VERTEX_POINT('',#195790); +#195790 = CARTESIAN_POINT('',(171.615,-82.823168,1.585)); +#195791 = LINE('',#195792,#195793); +#195792 = CARTESIAN_POINT('',(171.615,-82.524597,1.585)); +#195793 = VECTOR('',#195794,1.); +#195794 = DIRECTION('',(0.,-1.,0.)); +#195795 = ORIENTED_EDGE('',*,*,#195796,.T.); +#195796 = EDGE_CURVE('',#195789,#195797,#195799,.T.); +#195797 = VERTEX_POINT('',#195798); +#195798 = CARTESIAN_POINT('',(171.85,-82.823168,1.585)); +#195799 = LINE('',#195800,#195801); +#195800 = CARTESIAN_POINT('',(171.615,-82.823168,1.585)); +#195801 = VECTOR('',#195802,1.); +#195802 = DIRECTION('',(1.,0.,0.)); +#195803 = ORIENTED_EDGE('',*,*,#195804,.T.); +#195804 = EDGE_CURVE('',#195797,#195805,#195807,.T.); +#195805 = VERTEX_POINT('',#195806); +#195806 = CARTESIAN_POINT('',(171.85,-82.953168,1.585)); +#195807 = CIRCLE('',#195808,6.500000000092E-02); +#195808 = AXIS2_PLACEMENT_3D('',#195809,#195810,#195811); +#195809 = CARTESIAN_POINT('',(171.84999965513,-82.888168,1.585)); +#195810 = DIRECTION('',(0.,0.,-1.)); +#195811 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#195812 = ORIENTED_EDGE('',*,*,#195813,.T.); +#195813 = EDGE_CURVE('',#195805,#195814,#195816,.T.); +#195814 = VERTEX_POINT('',#195815); +#195815 = CARTESIAN_POINT('',(171.615,-82.953168,1.585)); +#195816 = LINE('',#195817,#195818); +#195817 = CARTESIAN_POINT('',(171.85,-82.953168,1.585)); +#195818 = VECTOR('',#195819,1.); +#195819 = DIRECTION('',(-1.,0.,0.)); +#195820 = ORIENTED_EDGE('',*,*,#195821,.T.); +#195821 = EDGE_CURVE('',#195814,#195822,#195824,.T.); +#195822 = VERTEX_POINT('',#195823); +#195823 = CARTESIAN_POINT('',(171.615,-83.294597,1.585)); +#195824 = LINE('',#195825,#195826); +#195825 = CARTESIAN_POINT('',(171.615,-82.953168,1.585)); +#195826 = VECTOR('',#195827,1.); +#195827 = DIRECTION('',(0.,-1.,0.)); +#195828 = ORIENTED_EDGE('',*,*,#195829,.T.); +#195829 = EDGE_CURVE('',#195822,#195830,#195832,.T.); +#195830 = VERTEX_POINT('',#195831); +#195831 = CARTESIAN_POINT('',(171.978572,-83.294597,1.585)); +#195832 = LINE('',#195833,#195834); +#195833 = CARTESIAN_POINT('',(171.615,-83.294597,1.585)); +#195834 = VECTOR('',#195835,1.); +#195835 = DIRECTION('',(1.,0.,0.)); +#195836 = ORIENTED_EDGE('',*,*,#195837,.T.); +#195837 = EDGE_CURVE('',#195830,#195838,#195840,.T.); +#195838 = VERTEX_POINT('',#195839); +#195839 = CARTESIAN_POINT('',(171.978572,-83.424597,1.585)); +#195840 = CIRCLE('',#195841,6.500000000092E-02); +#195841 = AXIS2_PLACEMENT_3D('',#195842,#195843,#195844); +#195842 = CARTESIAN_POINT('',(171.97857165513,-83.359597,1.585)); +#195843 = DIRECTION('',(0.,0.,-1.)); +#195844 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#195845 = ORIENTED_EDGE('',*,*,#195846,.T.); +#195846 = EDGE_CURVE('',#195838,#195847,#195849,.T.); +#195847 = VERTEX_POINT('',#195848); +#195848 = CARTESIAN_POINT('',(171.55,-83.424597,1.585)); +#195849 = LINE('',#195850,#195851); +#195850 = CARTESIAN_POINT('',(171.978572,-83.424597,1.585)); +#195851 = VECTOR('',#195852,1.); +#195852 = DIRECTION('',(-1.,0.,0.)); +#195853 = ORIENTED_EDGE('',*,*,#195854,.T.); +#195854 = EDGE_CURVE('',#195847,#195855,#195857,.T.); +#195855 = VERTEX_POINT('',#195856); +#195856 = CARTESIAN_POINT('',(171.485,-83.359597,1.585)); +#195857 = CIRCLE('',#195858,6.500103935387E-02); +#195858 = AXIS2_PLACEMENT_3D('',#195859,#195860,#195861); +#195859 = CARTESIAN_POINT('',(171.55000103934,-83.35959596065,1.585)); +#195860 = DIRECTION('',(0.,0.,-1.)); +#195861 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#195862 = ORIENTED_EDGE('',*,*,#195863,.T.); +#195863 = EDGE_CURVE('',#195855,#195753,#195864,.T.); +#195864 = LINE('',#195865,#195866); +#195865 = CARTESIAN_POINT('',(171.485,-83.359597,1.585)); +#195866 = VECTOR('',#195867,1.); +#195867 = DIRECTION('',(0.,1.,0.)); +#195868 = PLANE('',#195869); +#195869 = AXIS2_PLACEMENT_3D('',#195870,#195871,#195872); +#195870 = CARTESIAN_POINT('',(0.,0.,1.585)); +#195871 = DIRECTION('',(0.,0.,1.)); +#195872 = DIRECTION('',(1.,0.,-0.)); +#195873 = SHELL_BASED_SURFACE_MODEL('',(#195874)); +#195874 = OPEN_SHELL('',(#195875)); +#195875 = ADVANCED_FACE('',(#195876,#196010),#196062,.T.); +#195876 = FACE_BOUND('',#195877,.F.); +#195877 = EDGE_LOOP('',(#195878,#195889,#195897,#195905,#195913,#195922, + #195930,#195938,#195946,#195954,#195962,#195971,#195979,#195987, + #195995,#196004)); +#195878 = ORIENTED_EDGE('',*,*,#195879,.T.); +#195879 = EDGE_CURVE('',#195880,#195882,#195884,.T.); +#195880 = VERTEX_POINT('',#195881); +#195881 = CARTESIAN_POINT('',(168.913571,-82.459597,1.585)); +#195882 = VERTEX_POINT('',#195883); +#195883 = CARTESIAN_POINT('',(168.978571,-82.394597,1.585)); +#195884 = CIRCLE('',#195885,6.500103935393E-02); +#195885 = AXIS2_PLACEMENT_3D('',#195886,#195887,#195888); +#195886 = CARTESIAN_POINT('',(168.97857203934,-82.45959803934,1.585)); +#195887 = DIRECTION('',(0.,0.,-1.)); +#195888 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#195889 = ORIENTED_EDGE('',*,*,#195890,.T.); +#195890 = EDGE_CURVE('',#195882,#195891,#195893,.T.); +#195891 = VERTEX_POINT('',#195892); +#195892 = CARTESIAN_POINT('',(169.324621,-82.395232,1.585)); +#195893 = LINE('',#195894,#195895); +#195894 = CARTESIAN_POINT('',(168.978571,-82.394597,1.585)); +#195895 = VECTOR('',#195896,1.); +#195896 = DIRECTION('',(0.999998316401,-1.834991853498E-03,0.)); +#195897 = ORIENTED_EDGE('',*,*,#195898,.T.); +#195898 = EDGE_CURVE('',#195891,#195899,#195901,.T.); +#195899 = VERTEX_POINT('',#195900); +#195900 = CARTESIAN_POINT('',(169.350497,-82.401459,1.585)); +#195901 = LINE('',#195902,#195903); +#195902 = CARTESIAN_POINT('',(169.324621,-82.395232,1.585)); +#195903 = VECTOR('',#195904,1.); +#195904 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#195905 = ORIENTED_EDGE('',*,*,#195906,.T.); +#195906 = EDGE_CURVE('',#195899,#195907,#195909,.T.); +#195907 = VERTEX_POINT('',#195908); +#195908 = CARTESIAN_POINT('',(169.453105,-82.456492,1.585)); +#195909 = LINE('',#195910,#195911); +#195910 = CARTESIAN_POINT('',(169.350497,-82.401459,1.585)); +#195911 = VECTOR('',#195912,1.); +#195912 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#195913 = ORIENTED_EDGE('',*,*,#195914,.T.); +#195914 = EDGE_CURVE('',#195907,#195915,#195917,.T.); +#195915 = VERTEX_POINT('',#195916); +#195916 = CARTESIAN_POINT('',(169.554941,-82.774253,1.585)); +#195917 = CIRCLE('',#195918,0.311668456374); +#195918 = AXIS2_PLACEMENT_3D('',#195919,#195920,#195921); +#195919 = CARTESIAN_POINT('',(169.25333046242,-82.69571440872,1.585)); +#195920 = DIRECTION('',(0.,0.,-1.)); +#195921 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#195922 = ORIENTED_EDGE('',*,*,#195923,.T.); +#195923 = EDGE_CURVE('',#195915,#195924,#195926,.T.); +#195924 = VERTEX_POINT('',#195925); +#195925 = CARTESIAN_POINT('',(169.501751,-82.882608,1.585)); +#195926 = LINE('',#195927,#195928); +#195927 = CARTESIAN_POINT('',(169.554941,-82.774253,1.585)); +#195928 = VECTOR('',#195929,1.); +#195929 = DIRECTION('',(-0.440656804576,-0.897675654444,0.)); +#195930 = ORIENTED_EDGE('',*,*,#195931,.T.); +#195931 = EDGE_CURVE('',#195924,#195932,#195934,.T.); +#195932 = VERTEX_POINT('',#195933); +#195933 = CARTESIAN_POINT('',(169.44444,-82.939919,1.585)); +#195934 = LINE('',#195935,#195936); +#195935 = CARTESIAN_POINT('',(169.501751,-82.882608,1.585)); +#195936 = VECTOR('',#195937,1.); +#195937 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#195938 = ORIENTED_EDGE('',*,*,#195939,.T.); +#195939 = EDGE_CURVE('',#195932,#195940,#195942,.T.); +#195940 = VERTEX_POINT('',#195941); +#195941 = CARTESIAN_POINT('',(169.336084,-82.993109,1.585)); +#195942 = LINE('',#195943,#195944); +#195943 = CARTESIAN_POINT('',(169.44444,-82.939919,1.585)); +#195944 = VECTOR('',#195945,1.); +#195945 = DIRECTION('',(-0.897677263112,-0.440653527492,0.)); +#195946 = ORIENTED_EDGE('',*,*,#195947,.T.); +#195947 = EDGE_CURVE('',#195940,#195948,#195950,.T.); +#195948 = VERTEX_POINT('',#195949); +#195949 = CARTESIAN_POINT('',(169.317699,-82.996025,1.585)); +#195950 = LINE('',#195951,#195952); +#195951 = CARTESIAN_POINT('',(169.336084,-82.993109,1.585)); +#195952 = VECTOR('',#195953,1.); +#195953 = DIRECTION('',(-0.987654268842,-0.15664943421,0.)); +#195954 = ORIENTED_EDGE('',*,*,#195955,.T.); +#195955 = EDGE_CURVE('',#195948,#195956,#195958,.T.); +#195956 = VERTEX_POINT('',#195957); +#195957 = CARTESIAN_POINT('',(169.546107,-83.322322,1.585)); +#195958 = LINE('',#195959,#195960); +#195959 = CARTESIAN_POINT('',(169.317699,-82.996025,1.585)); +#195960 = VECTOR('',#195961,1.); +#195961 = DIRECTION('',(0.573462512866,-0.819231802567,0.)); +#195962 = ORIENTED_EDGE('',*,*,#195963,.T.); +#195963 = EDGE_CURVE('',#195956,#195964,#195966,.T.); +#195964 = VERTEX_POINT('',#195965); +#195965 = CARTESIAN_POINT('',(169.439607,-83.396872,1.585)); +#195966 = CIRCLE('',#195967,6.499990865385E-02); +#195967 = AXIS2_PLACEMENT_3D('',#195968,#195969,#195970); +#195968 = CARTESIAN_POINT('',(169.49285705055,-83.35959707222,1.585)); +#195969 = DIRECTION('',(0.,0.,-1.)); +#195970 = DIRECTION('',(0.819231142687,0.573463455551,0.)); +#195971 = ORIENTED_EDGE('',*,*,#195972,.T.); +#195972 = EDGE_CURVE('',#195964,#195973,#195975,.T.); +#195973 = VERTEX_POINT('',#195974); +#195974 = CARTESIAN_POINT('',(169.159014,-82.996025,1.585)); +#195975 = LINE('',#195976,#195977); +#195976 = CARTESIAN_POINT('',(169.439607,-83.396872,1.585)); +#195977 = VECTOR('',#195978,1.); +#195978 = DIRECTION('',(-0.573462481528,0.819231824504,0.)); +#195979 = ORIENTED_EDGE('',*,*,#195980,.T.); +#195980 = EDGE_CURVE('',#195973,#195981,#195983,.T.); +#195981 = VERTEX_POINT('',#195982); +#195982 = CARTESIAN_POINT('',(169.043571,-82.996025,1.585)); +#195983 = LINE('',#195984,#195985); +#195984 = CARTESIAN_POINT('',(169.159014,-82.996025,1.585)); +#195985 = VECTOR('',#195986,1.); +#195986 = DIRECTION('',(-1.,0.,0.)); +#195987 = ORIENTED_EDGE('',*,*,#195988,.T.); +#195988 = EDGE_CURVE('',#195981,#195989,#195991,.T.); +#195989 = VERTEX_POINT('',#195990); +#195990 = CARTESIAN_POINT('',(169.043571,-83.359597,1.585)); +#195991 = LINE('',#195992,#195993); +#195992 = CARTESIAN_POINT('',(169.043571,-82.996025,1.585)); +#195993 = VECTOR('',#195994,1.); +#195994 = DIRECTION('',(0.,-1.,0.)); +#195995 = ORIENTED_EDGE('',*,*,#195996,.T.); +#195996 = EDGE_CURVE('',#195989,#195997,#195999,.T.); +#195997 = VERTEX_POINT('',#195998); +#195998 = CARTESIAN_POINT('',(168.913571,-83.359597,1.585)); +#195999 = CIRCLE('',#196000,6.500000000091E-02); +#196000 = AXIS2_PLACEMENT_3D('',#196001,#196002,#196003); +#196001 = CARTESIAN_POINT('',(168.978571,-83.35959665513,1.585)); +#196002 = DIRECTION('',(-0.,0.,-1.)); +#196003 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#196004 = ORIENTED_EDGE('',*,*,#196005,.T.); +#196005 = EDGE_CURVE('',#195997,#195880,#196006,.T.); +#196006 = LINE('',#196007,#196008); +#196007 = CARTESIAN_POINT('',(168.913571,-83.359597,1.585)); +#196008 = VECTOR('',#196009,1.); +#196009 = DIRECTION('',(0.,1.,0.)); +#196010 = FACE_BOUND('',#196011,.F.); +#196011 = EDGE_LOOP('',(#196012,#196023,#196031,#196039,#196047,#196056) + ); +#196012 = ORIENTED_EDGE('',*,*,#196013,.T.); +#196013 = EDGE_CURVE('',#196014,#196016,#196018,.T.); +#196014 = VERTEX_POINT('',#196015); +#196015 = CARTESIAN_POINT('',(169.427857,-82.64637,1.585)); +#196016 = VERTEX_POINT('',#196017); +#196017 = CARTESIAN_POINT('',(169.306083,-82.524597,1.585)); +#196018 = CIRCLE('',#196019,0.17099627894); +#196019 = AXIS2_PLACEMENT_3D('',#196020,#196021,#196022); +#196020 = CARTESIAN_POINT('',(169.2625067157,-82.68994764214,1.585)); +#196021 = DIRECTION('',(0.,0.,1.)); +#196022 = DIRECTION('',(0.966981768956,0.254845558145,-0.)); +#196023 = ORIENTED_EDGE('',*,*,#196024,.T.); +#196024 = EDGE_CURVE('',#196016,#196025,#196027,.T.); +#196025 = VERTEX_POINT('',#196026); +#196026 = CARTESIAN_POINT('',(169.043571,-82.524597,1.585)); +#196027 = LINE('',#196028,#196029); +#196028 = CARTESIAN_POINT('',(169.306083,-82.524597,1.585)); +#196029 = VECTOR('',#196030,1.); +#196030 = DIRECTION('',(-1.,0.,0.)); +#196031 = ORIENTED_EDGE('',*,*,#196032,.T.); +#196032 = EDGE_CURVE('',#196025,#196033,#196035,.T.); +#196033 = VERTEX_POINT('',#196034); +#196034 = CARTESIAN_POINT('',(169.043571,-82.866025,1.585)); +#196035 = LINE('',#196036,#196037); +#196036 = CARTESIAN_POINT('',(169.043571,-82.524597,1.585)); +#196037 = VECTOR('',#196038,1.); +#196038 = DIRECTION('',(0.,-1.,0.)); +#196039 = ORIENTED_EDGE('',*,*,#196040,.T.); +#196040 = EDGE_CURVE('',#196033,#196041,#196043,.T.); +#196041 = VERTEX_POINT('',#196042); +#196042 = CARTESIAN_POINT('',(169.306083,-82.866025,1.585)); +#196043 = LINE('',#196044,#196045); +#196044 = CARTESIAN_POINT('',(169.043571,-82.866025,1.585)); +#196045 = VECTOR('',#196046,1.); +#196046 = DIRECTION('',(1.,0.,0.)); +#196047 = ORIENTED_EDGE('',*,*,#196048,.T.); +#196048 = EDGE_CURVE('',#196041,#196049,#196051,.T.); +#196049 = VERTEX_POINT('',#196050); +#196050 = CARTESIAN_POINT('',(169.427857,-82.744252,1.585)); +#196051 = CIRCLE('',#196052,0.171001125777); +#196052 = AXIS2_PLACEMENT_3D('',#196053,#196054,#196055); +#196053 = CARTESIAN_POINT('',(169.26250274885,-82.70067039097,1.585)); +#196054 = DIRECTION('',(0.,0.,1.)); +#196055 = DIRECTION('',(0.254853592023,-0.966979651613,0.)); +#196056 = ORIENTED_EDGE('',*,*,#196057,.T.); +#196057 = EDGE_CURVE('',#196049,#196014,#196058,.T.); +#196058 = LINE('',#196059,#196060); +#196059 = CARTESIAN_POINT('',(169.427857,-82.744252,1.585)); +#196060 = VECTOR('',#196061,1.); +#196061 = DIRECTION('',(0.,1.,0.)); +#196062 = PLANE('',#196063); +#196063 = AXIS2_PLACEMENT_3D('',#196064,#196065,#196066); +#196064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196065 = DIRECTION('',(0.,0.,1.)); +#196066 = DIRECTION('',(1.,0.,-0.)); +#196067 = SHELL_BASED_SURFACE_MODEL('',(#196068)); +#196068 = OPEN_SHELL('',(#196069)); +#196069 = ADVANCED_FACE('',(#196070),#196334,.T.); +#196070 = FACE_BOUND('',#196071,.F.); +#196071 = EDGE_LOOP('',(#196072,#196082,#196090,#196098,#196107,#196115, + #196123,#196132,#196140,#196148,#196156,#196164,#196172,#196180, + #196188,#196197,#196205,#196213,#196221,#196229,#196238,#196246, + #196254,#196263,#196271,#196279,#196287,#196295,#196303,#196311, + #196319,#196328)); +#196072 = ORIENTED_EDGE('',*,*,#196073,.T.); +#196073 = EDGE_CURVE('',#196074,#196076,#196078,.T.); +#196074 = VERTEX_POINT('',#196075); +#196075 = CARTESIAN_POINT('',(170.698416,-82.450702,1.585)); +#196076 = VERTEX_POINT('',#196077); +#196077 = CARTESIAN_POINT('',(170.806772,-82.397512,1.585)); +#196078 = LINE('',#196079,#196080); +#196079 = CARTESIAN_POINT('',(170.698416,-82.450702,1.585)); +#196080 = VECTOR('',#196081,1.); +#196081 = DIRECTION('',(0.897677263112,0.440653527492,0.)); +#196082 = ORIENTED_EDGE('',*,*,#196083,.T.); +#196083 = EDGE_CURVE('',#196076,#196084,#196086,.T.); +#196084 = VERTEX_POINT('',#196085); +#196085 = CARTESIAN_POINT('',(171.045936,-82.39663,1.585)); +#196086 = LINE('',#196087,#196088); +#196087 = CARTESIAN_POINT('',(170.806772,-82.397512,1.585)); +#196088 = VECTOR('',#196089,1.); +#196089 = DIRECTION('',(0.999993199965,3.687820919426E-03,0.)); +#196090 = ORIENTED_EDGE('',*,*,#196091,.T.); +#196091 = EDGE_CURVE('',#196084,#196092,#196094,.T.); +#196092 = VERTEX_POINT('',#196093); +#196093 = CARTESIAN_POINT('',(171.184841,-82.44079,1.585)); +#196094 = LINE('',#196095,#196096); +#196095 = CARTESIAN_POINT('',(171.045936,-82.39663,1.585)); +#196096 = VECTOR('',#196097,1.); +#196097 = DIRECTION('',(0.952999187063,-0.302972852674,0.)); +#196098 = ORIENTED_EDGE('',*,*,#196099,.T.); +#196099 = EDGE_CURVE('',#196092,#196100,#196102,.T.); +#196100 = VERTEX_POINT('',#196101); +#196101 = CARTESIAN_POINT('',(171.143732,-82.564119,1.585)); +#196102 = CIRCLE('',#196103,6.499998485859E-02); +#196103 = AXIS2_PLACEMENT_3D('',#196104,#196105,#196106); +#196104 = CARTESIAN_POINT('',(171.16428549751,-82.50245416584,1.585)); +#196105 = DIRECTION('',(0.,0.,-1.)); +#196106 = DIRECTION('',(0.316238573438,0.948679695508,0.)); +#196107 = ORIENTED_EDGE('',*,*,#196108,.T.); +#196108 = EDGE_CURVE('',#196100,#196109,#196111,.T.); +#196109 = VERTEX_POINT('',#196110); +#196110 = CARTESIAN_POINT('',(171.025167,-82.524597,1.585)); +#196111 = LINE('',#196112,#196113); +#196112 = CARTESIAN_POINT('',(171.143732,-82.564119,1.585)); +#196113 = VECTOR('',#196114,1.); +#196114 = DIRECTION('',(-0.94868249791,0.316230166427,0.)); +#196115 = ORIENTED_EDGE('',*,*,#196116,.T.); +#196116 = EDGE_CURVE('',#196109,#196117,#196119,.T.); +#196117 = VERTEX_POINT('',#196118); +#196118 = CARTESIAN_POINT('',(170.836774,-82.524597,1.585)); +#196119 = LINE('',#196120,#196121); +#196120 = CARTESIAN_POINT('',(171.025167,-82.524597,1.585)); +#196121 = VECTOR('',#196122,1.); +#196122 = DIRECTION('',(-1.,0.,0.)); +#196123 = ORIENTED_EDGE('',*,*,#196124,.T.); +#196124 = EDGE_CURVE('',#196117,#196125,#196127,.T.); +#196125 = VERTEX_POINT('',#196126); +#196126 = CARTESIAN_POINT('',(170.715,-82.64637,1.585)); +#196127 = CIRCLE('',#196128,0.170991742693); +#196128 = AXIS2_PLACEMENT_3D('',#196129,#196130,#196131); +#196129 = CARTESIAN_POINT('',(170.88034657161,-82.68994392943,1.585)); +#196130 = DIRECTION('',(0.,0.,1.)); +#196131 = DIRECTION('',(-0.254822665257,0.966987802028,0.)); +#196132 = ORIENTED_EDGE('',*,*,#196133,.T.); +#196133 = EDGE_CURVE('',#196125,#196134,#196136,.T.); +#196134 = VERTEX_POINT('',#196135); +#196135 = CARTESIAN_POINT('',(170.715,-82.701395,1.585)); +#196136 = LINE('',#196137,#196138); +#196137 = CARTESIAN_POINT('',(170.715,-82.64637,1.585)); +#196138 = VECTOR('',#196139,1.); +#196139 = DIRECTION('',(0.,-1.,0.)); +#196140 = ORIENTED_EDGE('',*,*,#196141,.T.); +#196141 = EDGE_CURVE('',#196134,#196142,#196144,.T.); +#196142 = VERTEX_POINT('',#196143); +#196143 = CARTESIAN_POINT('',(170.746278,-82.763951,1.585)); +#196144 = LINE('',#196145,#196146); +#196145 = CARTESIAN_POINT('',(170.715,-82.701395,1.585)); +#196146 = VECTOR('',#196147,1.); +#196147 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#196148 = ORIENTED_EDGE('',*,*,#196149,.T.); +#196149 = EDGE_CURVE('',#196142,#196150,#196152,.T.); +#196150 = VERTEX_POINT('',#196151); +#196151 = CARTESIAN_POINT('',(170.774216,-82.791889,1.585)); +#196152 = LINE('',#196153,#196154); +#196153 = CARTESIAN_POINT('',(170.746278,-82.763951,1.585)); +#196154 = VECTOR('',#196155,1.); +#196155 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#196156 = ORIENTED_EDGE('',*,*,#196157,.T.); +#196157 = EDGE_CURVE('',#196150,#196158,#196160,.T.); +#196158 = VERTEX_POINT('',#196159); +#196159 = CARTESIAN_POINT('',(170.844117,-82.826839,1.585)); +#196160 = LINE('',#196161,#196162); +#196161 = CARTESIAN_POINT('',(170.774216,-82.791889,1.585)); +#196162 = VECTOR('',#196163,1.); +#196163 = DIRECTION('',(0.894429750118,-0.447208477227,0.)); +#196164 = ORIENTED_EDGE('',*,*,#196165,.T.); +#196165 = EDGE_CURVE('',#196158,#196166,#196168,.T.); +#196166 = VERTEX_POINT('',#196167); +#196167 = CARTESIAN_POINT('',(171.021926,-82.872887,1.585)); +#196168 = LINE('',#196169,#196170); +#196169 = CARTESIAN_POINT('',(170.844117,-82.826839,1.585)); +#196170 = VECTOR('',#196171,1.); +#196171 = DIRECTION('',(0.968063827063,-0.25070386262,0.)); +#196172 = ORIENTED_EDGE('',*,*,#196173,.T.); +#196173 = EDGE_CURVE('',#196166,#196174,#196176,.T.); +#196174 = VERTEX_POINT('',#196175); +#196175 = CARTESIAN_POINT('',(171.124534,-82.927921,1.585)); +#196176 = LINE('',#196177,#196178); +#196177 = CARTESIAN_POINT('',(171.021926,-82.872887,1.585)); +#196178 = VECTOR('',#196179,1.); +#196179 = DIRECTION('',(0.88124595583,-0.472657979233,0.)); +#196180 = ORIENTED_EDGE('',*,*,#196181,.T.); +#196181 = EDGE_CURVE('',#196174,#196182,#196184,.T.); +#196182 = VERTEX_POINT('',#196183); +#196183 = CARTESIAN_POINT('',(171.179567,-82.987671,1.585)); +#196184 = LINE('',#196185,#196186); +#196185 = CARTESIAN_POINT('',(171.124534,-82.927921,1.585)); +#196186 = VECTOR('',#196187,1.); +#196187 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#196188 = ORIENTED_EDGE('',*,*,#196189,.T.); +#196189 = EDGE_CURVE('',#196182,#196190,#196192,.T.); +#196190 = VERTEX_POINT('',#196191); +#196191 = CARTESIAN_POINT('',(171.173179,-83.31118,1.585)); +#196192 = CIRCLE('',#196193,0.260194262446); +#196193 = AXIS2_PLACEMENT_3D('',#196194,#196195,#196196); +#196194 = CARTESIAN_POINT('',(170.97263260304,-83.14540244761,1.585)); +#196195 = DIRECTION('',(0.,0.,-1.)); +#196196 = DIRECTION('',(0.795307302373,0.606206478679,0.)); +#196197 = ORIENTED_EDGE('',*,*,#196198,.T.); +#196198 = EDGE_CURVE('',#196190,#196199,#196201,.T.); +#196199 = VERTEX_POINT('',#196200); +#196200 = CARTESIAN_POINT('',(171.115879,-83.368484,1.585)); +#196201 = LINE('',#196202,#196203); +#196202 = CARTESIAN_POINT('',(171.173179,-83.31118,1.585)); +#196203 = VECTOR('',#196204,1.); +#196204 = DIRECTION('',(-0.707082100752,-0.707131460759,0.)); +#196205 = ORIENTED_EDGE('',*,*,#196206,.T.); +#196206 = EDGE_CURVE('',#196199,#196207,#196209,.T.); +#196207 = VERTEX_POINT('',#196208); +#196208 = CARTESIAN_POINT('',(171.007513,-83.421681,1.585)); +#196209 = LINE('',#196210,#196211); +#196210 = CARTESIAN_POINT('',(171.115879,-83.368484,1.585)); +#196211 = VECTOR('',#196212,1.); +#196212 = DIRECTION('',(-0.897670410758,-0.440667486491,0.)); +#196213 = ORIENTED_EDGE('',*,*,#196214,.T.); +#196214 = EDGE_CURVE('',#196207,#196215,#196217,.T.); +#196215 = VERTEX_POINT('',#196216); +#196216 = CARTESIAN_POINT('',(170.768356,-83.422564,1.585)); +#196217 = LINE('',#196218,#196219); +#196218 = CARTESIAN_POINT('',(171.007513,-83.421681,1.585)); +#196219 = VECTOR('',#196220,1.); +#196220 = DIRECTION('',(-0.999993184138,-3.692110126744E-03,0.)); +#196221 = ORIENTED_EDGE('',*,*,#196222,.T.); +#196222 = EDGE_CURVE('',#196215,#196223,#196225,.T.); +#196223 = VERTEX_POINT('',#196224); +#196224 = CARTESIAN_POINT('',(170.629445,-83.378404,1.585)); +#196225 = LINE('',#196226,#196227); +#196226 = CARTESIAN_POINT('',(170.768356,-83.422564,1.585)); +#196227 = VECTOR('',#196228,1.); +#196228 = DIRECTION('',(-0.953002965462,0.302960967488,0.)); +#196229 = ORIENTED_EDGE('',*,*,#196230,.T.); +#196230 = EDGE_CURVE('',#196223,#196231,#196233,.T.); +#196231 = VERTEX_POINT('',#196232); +#196232 = CARTESIAN_POINT('',(170.670555,-83.255076,1.585)); +#196233 = CIRCLE('',#196234,6.499966862238E-02); +#196234 = AXIS2_PLACEMENT_3D('',#196235,#196236,#196237); +#196235 = CARTESIAN_POINT('',(170.65000012923,-83.31674004307,1.585)); +#196236 = DIRECTION('',(0.,0.,-1.)); +#196237 = DIRECTION('',(-0.316234369644,-0.948681096816,-0.)); +#196238 = ORIENTED_EDGE('',*,*,#196239,.T.); +#196239 = EDGE_CURVE('',#196231,#196240,#196242,.T.); +#196240 = VERTEX_POINT('',#196241); +#196241 = CARTESIAN_POINT('',(170.789119,-83.294597,1.585)); +#196242 = LINE('',#196243,#196244); +#196243 = CARTESIAN_POINT('',(170.670555,-83.255076,1.585)); +#196244 = VECTOR('',#196245,1.); +#196245 = DIRECTION('',(0.948684098193,-0.31622536558,0.)); +#196246 = ORIENTED_EDGE('',*,*,#196247,.T.); +#196247 = EDGE_CURVE('',#196240,#196248,#196250,.T.); +#196248 = VERTEX_POINT('',#196249); +#196249 = CARTESIAN_POINT('',(170.977512,-83.294597,1.585)); +#196250 = LINE('',#196251,#196252); +#196251 = CARTESIAN_POINT('',(170.789119,-83.294597,1.585)); +#196252 = VECTOR('',#196253,1.); +#196253 = DIRECTION('',(1.,0.,0.)); +#196254 = ORIENTED_EDGE('',*,*,#196255,.T.); +#196255 = EDGE_CURVE('',#196248,#196256,#196258,.T.); +#196256 = VERTEX_POINT('',#196257); +#196257 = CARTESIAN_POINT('',(171.099286,-83.172823,1.585)); +#196258 = CIRCLE('',#196259,0.170996196456); +#196259 = AXIS2_PLACEMENT_3D('',#196260,#196261,#196262); +#196260 = CARTESIAN_POINT('',(170.9339355,-83.1292465,1.585)); +#196261 = DIRECTION('',(0.,0.,1.)); +#196262 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#196263 = ORIENTED_EDGE('',*,*,#196264,.T.); +#196264 = EDGE_CURVE('',#196256,#196265,#196267,.T.); +#196265 = VERTEX_POINT('',#196266); +#196266 = CARTESIAN_POINT('',(171.099286,-83.117799,1.585)); +#196267 = LINE('',#196268,#196269); +#196268 = CARTESIAN_POINT('',(171.099286,-83.172823,1.585)); +#196269 = VECTOR('',#196270,1.); +#196270 = DIRECTION('',(0.,1.,0.)); +#196271 = ORIENTED_EDGE('',*,*,#196272,.T.); +#196272 = EDGE_CURVE('',#196265,#196273,#196275,.T.); +#196273 = VERTEX_POINT('',#196274); +#196274 = CARTESIAN_POINT('',(171.068007,-83.055242,1.585)); +#196275 = LINE('',#196276,#196277); +#196276 = CARTESIAN_POINT('',(171.099286,-83.117799,1.585)); +#196277 = VECTOR('',#196278,1.); +#196278 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#196279 = ORIENTED_EDGE('',*,*,#196280,.T.); +#196280 = EDGE_CURVE('',#196273,#196281,#196283,.T.); +#196281 = VERTEX_POINT('',#196282); +#196282 = CARTESIAN_POINT('',(171.04007,-83.027303,1.585)); +#196283 = LINE('',#196284,#196285); +#196284 = CARTESIAN_POINT('',(171.068007,-83.055242,1.585)); +#196285 = VECTOR('',#196286,1.); +#196286 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#196287 = ORIENTED_EDGE('',*,*,#196288,.T.); +#196288 = EDGE_CURVE('',#196281,#196289,#196291,.T.); +#196289 = VERTEX_POINT('',#196290); +#196290 = CARTESIAN_POINT('',(170.970168,-82.992353,1.585)); +#196291 = LINE('',#196292,#196293); +#196292 = CARTESIAN_POINT('',(171.04007,-83.027303,1.585)); +#196293 = VECTOR('',#196294,1.); +#196294 = DIRECTION('',(-0.894432309149,0.447203359056,0.)); +#196295 = ORIENTED_EDGE('',*,*,#196296,.T.); +#196296 = EDGE_CURVE('',#196289,#196297,#196299,.T.); +#196297 = VERTEX_POINT('',#196298); +#196298 = CARTESIAN_POINT('',(170.79236,-82.946306,1.585)); +#196299 = LINE('',#196300,#196301); +#196300 = CARTESIAN_POINT('',(170.970168,-82.992353,1.585)); +#196301 = VECTOR('',#196302,1.); +#196302 = DIRECTION('',(-0.96806480621,0.250700081726,0.)); +#196303 = ORIENTED_EDGE('',*,*,#196304,.T.); +#196304 = EDGE_CURVE('',#196297,#196305,#196307,.T.); +#196305 = VERTEX_POINT('',#196306); +#196306 = CARTESIAN_POINT('',(170.689752,-82.891273,1.585)); +#196307 = LINE('',#196308,#196309); +#196308 = CARTESIAN_POINT('',(170.79236,-82.946306,1.585)); +#196309 = VECTOR('',#196310,1.); +#196310 = DIRECTION('',(-0.881249533158,0.472651309433,0.)); +#196311 = ORIENTED_EDGE('',*,*,#196312,.T.); +#196312 = EDGE_CURVE('',#196305,#196313,#196315,.T.); +#196313 = VERTEX_POINT('',#196314); +#196314 = CARTESIAN_POINT('',(170.634719,-82.831523,1.585)); +#196315 = LINE('',#196316,#196317); +#196316 = CARTESIAN_POINT('',(170.689752,-82.891273,1.585)); +#196317 = VECTOR('',#196318,1.); +#196318 = DIRECTION('',(-0.677476455829,0.735544459429,0.)); +#196319 = ORIENTED_EDGE('',*,*,#196320,.T.); +#196320 = EDGE_CURVE('',#196313,#196321,#196323,.T.); +#196321 = VERTEX_POINT('',#196322); +#196322 = CARTESIAN_POINT('',(170.641105,-82.508013,1.585)); +#196323 = CIRCLE('',#196324,0.260194992517); +#196324 = AXIS2_PLACEMENT_3D('',#196325,#196326,#196327); +#196325 = CARTESIAN_POINT('',(170.84165297292,-82.67378979176,1.585)); +#196326 = DIRECTION('',(0.,0.,-1.)); +#196327 = DIRECTION('',(-0.795303441169,-0.606211544319,-0.)); +#196328 = ORIENTED_EDGE('',*,*,#196329,.T.); +#196329 = EDGE_CURVE('',#196321,#196074,#196330,.T.); +#196330 = LINE('',#196331,#196332); +#196331 = CARTESIAN_POINT('',(170.641105,-82.508013,1.585)); +#196332 = VECTOR('',#196333,1.); +#196333 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#196334 = PLANE('',#196335); +#196335 = AXIS2_PLACEMENT_3D('',#196336,#196337,#196338); +#196336 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196337 = DIRECTION('',(0.,0.,1.)); +#196338 = DIRECTION('',(1.,0.,-0.)); +#196339 = SHELL_BASED_SURFACE_MODEL('',(#196340)); +#196340 = OPEN_SHELL('',(#196341)); +#196341 = ADVANCED_FACE('',(#196342),#196411,.T.); +#196342 = FACE_BOUND('',#196343,.F.); +#196343 = EDGE_LOOP('',(#196344,#196355,#196363,#196372,#196380,#196388, + #196397,#196405)); +#196344 = ORIENTED_EDGE('',*,*,#196345,.T.); +#196345 = EDGE_CURVE('',#196346,#196348,#196350,.T.); +#196346 = VERTEX_POINT('',#196347); +#196347 = CARTESIAN_POINT('',(172.235715,-82.524597,1.585)); +#196348 = VERTEX_POINT('',#196349); +#196349 = CARTESIAN_POINT('',(172.235715,-82.394597,1.585)); +#196350 = CIRCLE('',#196351,6.500000000091E-02); +#196351 = AXIS2_PLACEMENT_3D('',#196352,#196353,#196354); +#196352 = CARTESIAN_POINT('',(172.23571534486,-82.459597,1.585)); +#196353 = DIRECTION('',(0.,0.,-1.)); +#196354 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#196355 = ORIENTED_EDGE('',*,*,#196356,.T.); +#196356 = EDGE_CURVE('',#196348,#196357,#196359,.T.); +#196357 = VERTEX_POINT('',#196358); +#196358 = CARTESIAN_POINT('',(172.750001,-82.394597,1.585)); +#196359 = LINE('',#196360,#196361); +#196360 = CARTESIAN_POINT('',(172.235715,-82.394597,1.585)); +#196361 = VECTOR('',#196362,1.); +#196362 = DIRECTION('',(1.,0.,0.)); +#196363 = ORIENTED_EDGE('',*,*,#196364,.T.); +#196364 = EDGE_CURVE('',#196357,#196365,#196367,.T.); +#196365 = VERTEX_POINT('',#196366); +#196366 = CARTESIAN_POINT('',(172.750001,-82.524597,1.585)); +#196367 = CIRCLE('',#196368,6.500000000091E-02); +#196368 = AXIS2_PLACEMENT_3D('',#196369,#196370,#196371); +#196369 = CARTESIAN_POINT('',(172.75000065513,-82.459597,1.585)); +#196370 = DIRECTION('',(0.,0.,-1.)); +#196371 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#196372 = ORIENTED_EDGE('',*,*,#196373,.T.); +#196373 = EDGE_CURVE('',#196365,#196374,#196376,.T.); +#196374 = VERTEX_POINT('',#196375); +#196375 = CARTESIAN_POINT('',(172.557858,-82.524597,1.585)); +#196376 = LINE('',#196377,#196378); +#196377 = CARTESIAN_POINT('',(172.750001,-82.524597,1.585)); +#196378 = VECTOR('',#196379,1.); +#196379 = DIRECTION('',(-1.,0.,0.)); +#196380 = ORIENTED_EDGE('',*,*,#196381,.T.); +#196381 = EDGE_CURVE('',#196374,#196382,#196384,.T.); +#196382 = VERTEX_POINT('',#196383); +#196383 = CARTESIAN_POINT('',(172.557858,-83.359597,1.585)); +#196384 = LINE('',#196385,#196386); +#196385 = CARTESIAN_POINT('',(172.557858,-82.524597,1.585)); +#196386 = VECTOR('',#196387,1.); +#196387 = DIRECTION('',(0.,-1.,0.)); +#196388 = ORIENTED_EDGE('',*,*,#196389,.T.); +#196389 = EDGE_CURVE('',#196382,#196390,#196392,.T.); +#196390 = VERTEX_POINT('',#196391); +#196391 = CARTESIAN_POINT('',(172.427858,-83.359597,1.585)); +#196392 = CIRCLE('',#196393,6.500000000093E-02); +#196393 = AXIS2_PLACEMENT_3D('',#196394,#196395,#196396); +#196394 = CARTESIAN_POINT('',(172.492858,-83.35959665513,1.585)); +#196395 = DIRECTION('',(-0.,0.,-1.)); +#196396 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#196397 = ORIENTED_EDGE('',*,*,#196398,.T.); +#196398 = EDGE_CURVE('',#196390,#196399,#196401,.T.); +#196399 = VERTEX_POINT('',#196400); +#196400 = CARTESIAN_POINT('',(172.427858,-82.524597,1.585)); +#196401 = LINE('',#196402,#196403); +#196402 = CARTESIAN_POINT('',(172.427858,-83.359597,1.585)); +#196403 = VECTOR('',#196404,1.); +#196404 = DIRECTION('',(0.,1.,0.)); +#196405 = ORIENTED_EDGE('',*,*,#196406,.T.); +#196406 = EDGE_CURVE('',#196399,#196346,#196407,.T.); +#196407 = LINE('',#196408,#196409); +#196408 = CARTESIAN_POINT('',(172.427858,-82.524597,1.585)); +#196409 = VECTOR('',#196410,1.); +#196410 = DIRECTION('',(-1.,0.,0.)); +#196411 = PLANE('',#196412); +#196412 = AXIS2_PLACEMENT_3D('',#196413,#196414,#196415); +#196413 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196414 = DIRECTION('',(0.,0.,1.)); +#196415 = DIRECTION('',(1.,0.,-0.)); +#196416 = SHELL_BASED_SURFACE_MODEL('',(#196417)); +#196417 = OPEN_SHELL('',(#196418)); +#196418 = ADVANCED_FACE('',(#196419),#196488,.T.); +#196419 = FACE_BOUND('',#196420,.F.); +#196420 = EDGE_LOOP('',(#196421,#196432,#196440,#196448,#196457,#196465, + #196474,#196482)); +#196421 = ORIENTED_EDGE('',*,*,#196422,.T.); +#196422 = EDGE_CURVE('',#196423,#196425,#196427,.T.); +#196423 = VERTEX_POINT('',#196424); +#196424 = CARTESIAN_POINT('',(207.361217,-81.650139,1.585)); +#196425 = VERTEX_POINT('',#196426); +#196426 = CARTESIAN_POINT('',(207.47665,-81.6731,1.585)); +#196427 = CIRCLE('',#196428,6.000007318647E-02); +#196428 = AXIS2_PLACEMENT_3D('',#196429,#196430,#196431); +#196429 = CARTESIAN_POINT('',(207.41664992681,-81.67309982331,1.585)); +#196430 = DIRECTION('',(0.,0.,-1.)); +#196431 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#196432 = ORIENTED_EDGE('',*,*,#196433,.T.); +#196433 = EDGE_CURVE('',#196425,#196434,#196436,.T.); +#196434 = VERTEX_POINT('',#196435); +#196435 = CARTESIAN_POINT('',(207.47665,-82.8631,1.585)); +#196436 = LINE('',#196437,#196438); +#196437 = CARTESIAN_POINT('',(207.47665,-81.6731,1.585)); +#196438 = VECTOR('',#196439,1.); +#196439 = DIRECTION('',(0.,-1.,0.)); +#196440 = ORIENTED_EDGE('',*,*,#196441,.T.); +#196441 = EDGE_CURVE('',#196434,#196442,#196444,.T.); +#196442 = VERTEX_POINT('',#196443); +#196443 = CARTESIAN_POINT('',(208.66665,-82.8631,1.585)); +#196444 = LINE('',#196445,#196446); +#196445 = CARTESIAN_POINT('',(207.47665,-82.8631,1.585)); +#196446 = VECTOR('',#196447,1.); +#196447 = DIRECTION('',(1.,0.,0.)); +#196448 = ORIENTED_EDGE('',*,*,#196449,.T.); +#196449 = EDGE_CURVE('',#196442,#196450,#196452,.T.); +#196450 = VERTEX_POINT('',#196451); +#196451 = CARTESIAN_POINT('',(208.66665,-82.9831,1.585)); +#196452 = CIRCLE('',#196453,6.000000000042E-02); +#196453 = AXIS2_PLACEMENT_3D('',#196454,#196455,#196456); +#196454 = CARTESIAN_POINT('',(208.66665022558,-82.9231,1.585)); +#196455 = DIRECTION('',(0.,0.,-1.)); +#196456 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#196457 = ORIENTED_EDGE('',*,*,#196458,.T.); +#196458 = EDGE_CURVE('',#196450,#196459,#196461,.T.); +#196459 = VERTEX_POINT('',#196460); +#196460 = CARTESIAN_POINT('',(207.41665,-82.9831,1.585)); +#196461 = LINE('',#196462,#196463); +#196462 = CARTESIAN_POINT('',(208.66665,-82.9831,1.585)); +#196463 = VECTOR('',#196464,1.); +#196464 = DIRECTION('',(-1.,0.,0.)); +#196465 = ORIENTED_EDGE('',*,*,#196466,.T.); +#196466 = EDGE_CURVE('',#196459,#196467,#196469,.T.); +#196467 = VERTEX_POINT('',#196468); +#196468 = CARTESIAN_POINT('',(207.35665,-82.9231,1.585)); +#196469 = CIRCLE('',#196470,5.999932016257E-02); +#196470 = AXIS2_PLACEMENT_3D('',#196471,#196472,#196473); +#196471 = CARTESIAN_POINT('',(207.41664932015,-82.92310067984,1.585)); +#196472 = DIRECTION('',(0.,0.,-1.)); +#196473 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#196474 = ORIENTED_EDGE('',*,*,#196475,.T.); +#196475 = EDGE_CURVE('',#196467,#196476,#196478,.T.); +#196476 = VERTEX_POINT('',#196477); +#196477 = CARTESIAN_POINT('',(207.35665,-81.6731,1.585)); +#196478 = LINE('',#196479,#196480); +#196479 = CARTESIAN_POINT('',(207.35665,-82.9231,1.585)); +#196480 = VECTOR('',#196481,1.); +#196481 = DIRECTION('',(0.,1.,0.)); +#196482 = ORIENTED_EDGE('',*,*,#196483,.T.); +#196483 = EDGE_CURVE('',#196476,#196423,#196484,.T.); +#196484 = LINE('',#196485,#196486); +#196485 = CARTESIAN_POINT('',(207.35665,-81.6731,1.585)); +#196486 = VECTOR('',#196487,1.); +#196487 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#196488 = PLANE('',#196489); +#196489 = AXIS2_PLACEMENT_3D('',#196490,#196491,#196492); +#196490 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196491 = DIRECTION('',(0.,0.,1.)); +#196492 = DIRECTION('',(1.,0.,-0.)); +#196493 = SHELL_BASED_SURFACE_MODEL('',(#196494)); +#196494 = OPEN_SHELL('',(#196495)); +#196495 = ADVANCED_FACE('',(#196496),#196532,.T.); +#196496 = FACE_BOUND('',#196497,.F.); +#196497 = EDGE_LOOP('',(#196498,#196509,#196517,#196526)); +#196498 = ORIENTED_EDGE('',*,*,#196499,.T.); +#196499 = EDGE_CURVE('',#196500,#196502,#196504,.T.); +#196500 = VERTEX_POINT('',#196501); +#196501 = CARTESIAN_POINT('',(101.45107,-82.8731,1.585)); +#196502 = VERTEX_POINT('',#196503); +#196503 = CARTESIAN_POINT('',(101.45107,-82.7531,1.585)); +#196504 = CIRCLE('',#196505,6.000000000042E-02); +#196505 = AXIS2_PLACEMENT_3D('',#196506,#196507,#196508); +#196506 = CARTESIAN_POINT('',(101.45106977441,-82.8131,1.585)); +#196507 = DIRECTION('',(0.,0.,-1.)); +#196508 = DIRECTION('',(3.759794490531E-06,-0.999999999993,0.)); +#196509 = ORIENTED_EDGE('',*,*,#196510,.T.); +#196510 = EDGE_CURVE('',#196502,#196511,#196513,.T.); +#196511 = VERTEX_POINT('',#196512); +#196512 = CARTESIAN_POINT('',(101.73223,-82.7531,1.585)); +#196513 = LINE('',#196514,#196515); +#196514 = CARTESIAN_POINT('',(101.45107,-82.7531,1.585)); +#196515 = VECTOR('',#196516,1.); +#196516 = DIRECTION('',(1.,0.,0.)); +#196517 = ORIENTED_EDGE('',*,*,#196518,.T.); +#196518 = EDGE_CURVE('',#196511,#196519,#196521,.T.); +#196519 = VERTEX_POINT('',#196520); +#196520 = CARTESIAN_POINT('',(101.73223,-82.8731,1.585)); +#196521 = CIRCLE('',#196522,6.000000000042E-02); +#196522 = AXIS2_PLACEMENT_3D('',#196523,#196524,#196525); +#196523 = CARTESIAN_POINT('',(101.73223022558,-82.8131,1.585)); +#196524 = DIRECTION('',(0.,0.,-1.)); +#196525 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#196526 = ORIENTED_EDGE('',*,*,#196527,.T.); +#196527 = EDGE_CURVE('',#196519,#196500,#196528,.T.); +#196528 = LINE('',#196529,#196530); +#196529 = CARTESIAN_POINT('',(101.73223,-82.8731,1.585)); +#196530 = VECTOR('',#196531,1.); +#196531 = DIRECTION('',(-1.,0.,0.)); +#196532 = PLANE('',#196533); +#196533 = AXIS2_PLACEMENT_3D('',#196534,#196535,#196536); +#196534 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196535 = DIRECTION('',(0.,0.,1.)); +#196536 = DIRECTION('',(1.,0.,-0.)); +#196537 = SHELL_BASED_SURFACE_MODEL('',(#196538)); +#196538 = OPEN_SHELL('',(#196539)); +#196539 = ADVANCED_FACE('',(#196540,#196610,#196794,#196878,#196912, + #196946),#196980,.T.); +#196540 = FACE_BOUND('',#196541,.F.); +#196541 = EDGE_LOOP('',(#196542,#196553,#196561,#196570,#196578,#196587, + #196595,#196604)); +#196542 = ORIENTED_EDGE('',*,*,#196543,.T.); +#196543 = EDGE_CURVE('',#196544,#196546,#196548,.T.); +#196544 = VERTEX_POINT('',#196545); +#196545 = CARTESIAN_POINT('',(207.64665,-75.0131,1.585)); +#196546 = VERTEX_POINT('',#196547); +#196547 = CARTESIAN_POINT('',(207.70665,-74.9531,1.585)); +#196548 = CIRCLE('',#196549,5.999932016262E-02); +#196549 = AXIS2_PLACEMENT_3D('',#196550,#196551,#196552); +#196550 = CARTESIAN_POINT('',(207.70664932015,-75.01309932015,1.585)); +#196551 = DIRECTION('',(0.,0.,-1.)); +#196552 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#196553 = ORIENTED_EDGE('',*,*,#196554,.T.); +#196554 = EDGE_CURVE('',#196546,#196555,#196557,.T.); +#196555 = VERTEX_POINT('',#196556); +#196556 = CARTESIAN_POINT('',(213.67665,-74.9531,1.585)); +#196557 = LINE('',#196558,#196559); +#196558 = CARTESIAN_POINT('',(207.70665,-74.9531,1.585)); +#196559 = VECTOR('',#196560,1.); +#196560 = DIRECTION('',(1.,0.,0.)); +#196561 = ORIENTED_EDGE('',*,*,#196562,.T.); +#196562 = EDGE_CURVE('',#196555,#196563,#196565,.T.); +#196563 = VERTEX_POINT('',#196564); +#196564 = CARTESIAN_POINT('',(213.73665,-75.0131,1.585)); +#196565 = CIRCLE('',#196566,5.999932016257E-02); +#196566 = AXIS2_PLACEMENT_3D('',#196567,#196568,#196569); +#196567 = CARTESIAN_POINT('',(213.67665067984,-75.01309932015,1.585)); +#196568 = DIRECTION('',(0.,0.,-1.)); +#196569 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#196570 = ORIENTED_EDGE('',*,*,#196571,.T.); +#196571 = EDGE_CURVE('',#196563,#196572,#196574,.T.); +#196572 = VERTEX_POINT('',#196573); +#196573 = CARTESIAN_POINT('',(213.73665,-82.6331,1.585)); +#196574 = LINE('',#196575,#196576); +#196575 = CARTESIAN_POINT('',(213.73665,-75.0131,1.585)); +#196576 = VECTOR('',#196577,1.); +#196577 = DIRECTION('',(0.,-1.,0.)); +#196578 = ORIENTED_EDGE('',*,*,#196579,.T.); +#196579 = EDGE_CURVE('',#196572,#196580,#196582,.T.); +#196580 = VERTEX_POINT('',#196581); +#196581 = CARTESIAN_POINT('',(213.67665,-82.6931,1.585)); +#196582 = CIRCLE('',#196583,5.999932016265E-02); +#196583 = AXIS2_PLACEMENT_3D('',#196584,#196585,#196586); +#196584 = CARTESIAN_POINT('',(213.67665067984,-82.63310067984,1.585)); +#196585 = DIRECTION('',(0.,0.,-1.)); +#196586 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#196587 = ORIENTED_EDGE('',*,*,#196588,.T.); +#196588 = EDGE_CURVE('',#196580,#196589,#196591,.T.); +#196589 = VERTEX_POINT('',#196590); +#196590 = CARTESIAN_POINT('',(207.70665,-82.6931,1.585)); +#196591 = LINE('',#196592,#196593); +#196592 = CARTESIAN_POINT('',(213.67665,-82.6931,1.585)); +#196593 = VECTOR('',#196594,1.); +#196594 = DIRECTION('',(-1.,0.,0.)); +#196595 = ORIENTED_EDGE('',*,*,#196596,.T.); +#196596 = EDGE_CURVE('',#196589,#196597,#196599,.T.); +#196597 = VERTEX_POINT('',#196598); +#196598 = CARTESIAN_POINT('',(207.64665,-82.6331,1.585)); +#196599 = CIRCLE('',#196600,5.999932016256E-02); +#196600 = AXIS2_PLACEMENT_3D('',#196601,#196602,#196603); +#196601 = CARTESIAN_POINT('',(207.70664932015,-82.63310067984,1.585)); +#196602 = DIRECTION('',(0.,0.,-1.)); +#196603 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#196604 = ORIENTED_EDGE('',*,*,#196605,.T.); +#196605 = EDGE_CURVE('',#196597,#196544,#196606,.T.); +#196606 = LINE('',#196607,#196608); +#196607 = CARTESIAN_POINT('',(207.64665,-82.6331,1.585)); +#196608 = VECTOR('',#196609,1.); +#196609 = DIRECTION('',(0.,1.,0.)); +#196610 = FACE_BOUND('',#196611,.F.); +#196611 = EDGE_LOOP('',(#196612,#196623,#196631,#196639,#196647,#196656, + #196664,#196672,#196680,#196689,#196697,#196706,#196714,#196722, + #196730,#196739,#196747,#196755,#196763,#196772,#196780,#196788)); +#196612 = ORIENTED_EDGE('',*,*,#196613,.T.); +#196613 = EDGE_CURVE('',#196614,#196616,#196618,.T.); +#196614 = VERTEX_POINT('',#196615); +#196615 = CARTESIAN_POINT('',(209.96665,-75.8331,1.585)); +#196616 = VERTEX_POINT('',#196617); +#196617 = CARTESIAN_POINT('',(209.90665,-75.7731,1.585)); +#196618 = CIRCLE('',#196619,5.999932016264E-02); +#196619 = AXIS2_PLACEMENT_3D('',#196620,#196621,#196622); +#196620 = CARTESIAN_POINT('',(209.96664932015,-75.77310067984,1.585)); +#196621 = DIRECTION('',(0.,0.,-1.)); +#196622 = DIRECTION('',(1.133081470032E-05,-0.999999999936,0.)); +#196623 = ORIENTED_EDGE('',*,*,#196624,.T.); +#196624 = EDGE_CURVE('',#196616,#196625,#196627,.T.); +#196625 = VERTEX_POINT('',#196626); +#196626 = CARTESIAN_POINT('',(209.90665,-75.0731,1.585)); +#196627 = LINE('',#196628,#196629); +#196628 = CARTESIAN_POINT('',(209.90665,-75.7731,1.585)); +#196629 = VECTOR('',#196630,1.); +#196630 = DIRECTION('',(0.,1.,0.)); +#196631 = ORIENTED_EDGE('',*,*,#196632,.T.); +#196632 = EDGE_CURVE('',#196625,#196633,#196635,.T.); +#196633 = VERTEX_POINT('',#196634); +#196634 = CARTESIAN_POINT('',(208.52665,-75.0731,1.585)); +#196635 = LINE('',#196636,#196637); +#196636 = CARTESIAN_POINT('',(209.90665,-75.0731,1.585)); +#196637 = VECTOR('',#196638,1.); +#196638 = DIRECTION('',(-1.,0.,0.)); +#196639 = ORIENTED_EDGE('',*,*,#196640,.T.); +#196640 = EDGE_CURVE('',#196633,#196641,#196643,.T.); +#196641 = VERTEX_POINT('',#196642); +#196642 = CARTESIAN_POINT('',(208.52665,-76.8231,1.585)); +#196643 = LINE('',#196644,#196645); +#196644 = CARTESIAN_POINT('',(208.52665,-75.0731,1.585)); +#196645 = VECTOR('',#196646,1.); +#196646 = DIRECTION('',(0.,-1.,0.)); +#196647 = ORIENTED_EDGE('',*,*,#196648,.T.); +#196648 = EDGE_CURVE('',#196641,#196649,#196651,.T.); +#196649 = VERTEX_POINT('',#196650); +#196650 = CARTESIAN_POINT('',(208.46665,-76.8831,1.585)); +#196651 = CIRCLE('',#196652,5.999932016251E-02); +#196652 = AXIS2_PLACEMENT_3D('',#196653,#196654,#196655); +#196653 = CARTESIAN_POINT('',(208.46665067984,-76.82310067984,1.585)); +#196654 = DIRECTION('',(0.,0.,-1.)); +#196655 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#196656 = ORIENTED_EDGE('',*,*,#196657,.T.); +#196657 = EDGE_CURVE('',#196649,#196658,#196660,.T.); +#196658 = VERTEX_POINT('',#196659); +#196659 = CARTESIAN_POINT('',(207.76665,-76.8831,1.585)); +#196660 = LINE('',#196661,#196662); +#196661 = CARTESIAN_POINT('',(208.46665,-76.8831,1.585)); +#196662 = VECTOR('',#196663,1.); +#196663 = DIRECTION('',(-1.,0.,0.)); +#196664 = ORIENTED_EDGE('',*,*,#196665,.T.); +#196665 = EDGE_CURVE('',#196658,#196666,#196668,.T.); +#196666 = VERTEX_POINT('',#196667); +#196667 = CARTESIAN_POINT('',(207.76665,-78.2631,1.585)); +#196668 = LINE('',#196669,#196670); +#196669 = CARTESIAN_POINT('',(207.76665,-76.8831,1.585)); +#196670 = VECTOR('',#196671,1.); +#196671 = DIRECTION('',(0.,-1.,0.)); +#196672 = ORIENTED_EDGE('',*,*,#196673,.T.); +#196673 = EDGE_CURVE('',#196666,#196674,#196676,.T.); +#196674 = VERTEX_POINT('',#196675); +#196675 = CARTESIAN_POINT('',(208.46665,-78.2631,1.585)); +#196676 = LINE('',#196677,#196678); +#196677 = CARTESIAN_POINT('',(207.76665,-78.2631,1.585)); +#196678 = VECTOR('',#196679,1.); +#196679 = DIRECTION('',(1.,0.,0.)); +#196680 = ORIENTED_EDGE('',*,*,#196681,.T.); +#196681 = EDGE_CURVE('',#196674,#196682,#196684,.T.); +#196682 = VERTEX_POINT('',#196683); +#196683 = CARTESIAN_POINT('',(208.52665,-78.3231,1.585)); +#196684 = CIRCLE('',#196685,5.999932016262E-02); +#196685 = AXIS2_PLACEMENT_3D('',#196686,#196687,#196688); +#196686 = CARTESIAN_POINT('',(208.46665067984,-78.32309932015,1.585)); +#196687 = DIRECTION('',(0.,0.,-1.)); +#196688 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#196689 = ORIENTED_EDGE('',*,*,#196690,.T.); +#196690 = EDGE_CURVE('',#196682,#196691,#196693,.T.); +#196691 = VERTEX_POINT('',#196692); +#196692 = CARTESIAN_POINT('',(208.52665,-79.3231,1.585)); +#196693 = LINE('',#196694,#196695); +#196694 = CARTESIAN_POINT('',(208.52665,-78.3231,1.585)); +#196695 = VECTOR('',#196696,1.); +#196696 = DIRECTION('',(0.,-1.,0.)); +#196697 = ORIENTED_EDGE('',*,*,#196698,.T.); +#196698 = EDGE_CURVE('',#196691,#196699,#196701,.T.); +#196699 = VERTEX_POINT('',#196700); +#196700 = CARTESIAN_POINT('',(208.46665,-79.3831,1.585)); +#196701 = CIRCLE('',#196702,5.999932016251E-02); +#196702 = AXIS2_PLACEMENT_3D('',#196703,#196704,#196705); +#196703 = CARTESIAN_POINT('',(208.46665067984,-79.32310067984,1.585)); +#196704 = DIRECTION('',(0.,0.,-1.)); +#196705 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#196706 = ORIENTED_EDGE('',*,*,#196707,.T.); +#196707 = EDGE_CURVE('',#196699,#196708,#196710,.T.); +#196708 = VERTEX_POINT('',#196709); +#196709 = CARTESIAN_POINT('',(207.76665,-79.3831,1.585)); +#196710 = LINE('',#196711,#196712); +#196711 = CARTESIAN_POINT('',(208.46665,-79.3831,1.585)); +#196712 = VECTOR('',#196713,1.); +#196713 = DIRECTION('',(-1.,0.,0.)); +#196714 = ORIENTED_EDGE('',*,*,#196715,.T.); +#196715 = EDGE_CURVE('',#196708,#196716,#196718,.T.); +#196716 = VERTEX_POINT('',#196717); +#196717 = CARTESIAN_POINT('',(207.76665,-80.7631,1.585)); +#196718 = LINE('',#196719,#196720); +#196719 = CARTESIAN_POINT('',(207.76665,-79.3831,1.585)); +#196720 = VECTOR('',#196721,1.); +#196721 = DIRECTION('',(0.,-1.,0.)); +#196722 = ORIENTED_EDGE('',*,*,#196723,.T.); +#196723 = EDGE_CURVE('',#196716,#196724,#196726,.T.); +#196724 = VERTEX_POINT('',#196725); +#196725 = CARTESIAN_POINT('',(208.46665,-80.7631,1.585)); +#196726 = LINE('',#196727,#196728); +#196727 = CARTESIAN_POINT('',(207.76665,-80.7631,1.585)); +#196728 = VECTOR('',#196729,1.); +#196729 = DIRECTION('',(1.,0.,0.)); +#196730 = ORIENTED_EDGE('',*,*,#196731,.T.); +#196731 = EDGE_CURVE('',#196724,#196732,#196734,.T.); +#196732 = VERTEX_POINT('',#196733); +#196733 = CARTESIAN_POINT('',(208.52665,-80.8231,1.585)); +#196734 = CIRCLE('',#196735,5.999932016262E-02); +#196735 = AXIS2_PLACEMENT_3D('',#196736,#196737,#196738); +#196736 = CARTESIAN_POINT('',(208.46665067984,-80.82309932015,1.585)); +#196737 = DIRECTION('',(0.,0.,-1.)); +#196738 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#196739 = ORIENTED_EDGE('',*,*,#196740,.T.); +#196740 = EDGE_CURVE('',#196732,#196741,#196743,.T.); +#196741 = VERTEX_POINT('',#196742); +#196742 = CARTESIAN_POINT('',(208.52665,-82.5731,1.585)); +#196743 = LINE('',#196744,#196745); +#196744 = CARTESIAN_POINT('',(208.52665,-80.8231,1.585)); +#196745 = VECTOR('',#196746,1.); +#196746 = DIRECTION('',(0.,-1.,0.)); +#196747 = ORIENTED_EDGE('',*,*,#196748,.T.); +#196748 = EDGE_CURVE('',#196741,#196749,#196751,.T.); +#196749 = VERTEX_POINT('',#196750); +#196750 = CARTESIAN_POINT('',(209.90665,-82.5731,1.585)); +#196751 = LINE('',#196752,#196753); +#196752 = CARTESIAN_POINT('',(208.52665,-82.5731,1.585)); +#196753 = VECTOR('',#196754,1.); +#196754 = DIRECTION('',(1.,0.,0.)); +#196755 = ORIENTED_EDGE('',*,*,#196756,.T.); +#196756 = EDGE_CURVE('',#196749,#196757,#196759,.T.); +#196757 = VERTEX_POINT('',#196758); +#196758 = CARTESIAN_POINT('',(209.90665,-81.8731,1.585)); +#196759 = LINE('',#196760,#196761); +#196760 = CARTESIAN_POINT('',(209.90665,-82.5731,1.585)); +#196761 = VECTOR('',#196762,1.); +#196762 = DIRECTION('',(0.,1.,0.)); +#196763 = ORIENTED_EDGE('',*,*,#196764,.T.); +#196764 = EDGE_CURVE('',#196757,#196765,#196767,.T.); +#196765 = VERTEX_POINT('',#196766); +#196766 = CARTESIAN_POINT('',(209.96665,-81.8131,1.585)); +#196767 = CIRCLE('',#196768,5.999932016253E-02); +#196768 = AXIS2_PLACEMENT_3D('',#196769,#196770,#196771); +#196769 = CARTESIAN_POINT('',(209.96664932015,-81.87309932015,1.585)); +#196770 = DIRECTION('',(0.,0.,-1.)); +#196771 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#196772 = ORIENTED_EDGE('',*,*,#196773,.T.); +#196773 = EDGE_CURVE('',#196765,#196774,#196776,.T.); +#196774 = VERTEX_POINT('',#196775); +#196775 = CARTESIAN_POINT('',(212.85665,-81.8131,1.585)); +#196776 = LINE('',#196777,#196778); +#196777 = CARTESIAN_POINT('',(209.96665,-81.8131,1.585)); +#196778 = VECTOR('',#196779,1.); +#196779 = DIRECTION('',(1.,0.,0.)); +#196780 = ORIENTED_EDGE('',*,*,#196781,.T.); +#196781 = EDGE_CURVE('',#196774,#196782,#196784,.T.); +#196782 = VERTEX_POINT('',#196783); +#196783 = CARTESIAN_POINT('',(212.85665,-75.8331,1.585)); +#196784 = LINE('',#196785,#196786); +#196785 = CARTESIAN_POINT('',(212.85665,-81.8131,1.585)); +#196786 = VECTOR('',#196787,1.); +#196787 = DIRECTION('',(0.,1.,0.)); +#196788 = ORIENTED_EDGE('',*,*,#196789,.T.); +#196789 = EDGE_CURVE('',#196782,#196614,#196790,.T.); +#196790 = LINE('',#196791,#196792); +#196791 = CARTESIAN_POINT('',(212.85665,-75.8331,1.585)); +#196792 = VECTOR('',#196793,1.); +#196793 = DIRECTION('',(-1.,0.,0.)); +#196794 = FACE_BOUND('',#196795,.F.); +#196795 = EDGE_LOOP('',(#196796,#196806,#196814,#196822,#196830,#196839, + #196847,#196856,#196864,#196872)); +#196796 = ORIENTED_EDGE('',*,*,#196797,.T.); +#196797 = EDGE_CURVE('',#196798,#196800,#196802,.T.); +#196798 = VERTEX_POINT('',#196799); +#196799 = CARTESIAN_POINT('',(213.61665,-82.5731,1.585)); +#196800 = VERTEX_POINT('',#196801); +#196801 = CARTESIAN_POINT('',(213.61665,-75.0731,1.585)); +#196802 = LINE('',#196803,#196804); +#196803 = CARTESIAN_POINT('',(213.61665,-82.5731,1.585)); +#196804 = VECTOR('',#196805,1.); +#196805 = DIRECTION('',(0.,1.,0.)); +#196806 = ORIENTED_EDGE('',*,*,#196807,.T.); +#196807 = EDGE_CURVE('',#196800,#196808,#196810,.T.); +#196808 = VERTEX_POINT('',#196809); +#196809 = CARTESIAN_POINT('',(210.02665,-75.0731,1.585)); +#196810 = LINE('',#196811,#196812); +#196811 = CARTESIAN_POINT('',(213.61665,-75.0731,1.585)); +#196812 = VECTOR('',#196813,1.); +#196813 = DIRECTION('',(-1.,0.,0.)); +#196814 = ORIENTED_EDGE('',*,*,#196815,.T.); +#196815 = EDGE_CURVE('',#196808,#196816,#196818,.T.); +#196816 = VERTEX_POINT('',#196817); +#196817 = CARTESIAN_POINT('',(210.02665,-75.7131,1.585)); +#196818 = LINE('',#196819,#196820); +#196819 = CARTESIAN_POINT('',(210.02665,-75.0731,1.585)); +#196820 = VECTOR('',#196821,1.); +#196821 = DIRECTION('',(0.,-1.,0.)); +#196822 = ORIENTED_EDGE('',*,*,#196823,.T.); +#196823 = EDGE_CURVE('',#196816,#196824,#196826,.T.); +#196824 = VERTEX_POINT('',#196825); +#196825 = CARTESIAN_POINT('',(212.91665,-75.7131,1.585)); +#196826 = LINE('',#196827,#196828); +#196827 = CARTESIAN_POINT('',(210.02665,-75.7131,1.585)); +#196828 = VECTOR('',#196829,1.); +#196829 = DIRECTION('',(1.,0.,0.)); +#196830 = ORIENTED_EDGE('',*,*,#196831,.T.); +#196831 = EDGE_CURVE('',#196824,#196832,#196834,.T.); +#196832 = VERTEX_POINT('',#196833); +#196833 = CARTESIAN_POINT('',(212.97665,-75.7731,1.585)); +#196834 = CIRCLE('',#196835,5.999932016262E-02); +#196835 = AXIS2_PLACEMENT_3D('',#196836,#196837,#196838); +#196836 = CARTESIAN_POINT('',(212.91665067984,-75.77309932015,1.585)); +#196837 = DIRECTION('',(0.,0.,-1.)); +#196838 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#196839 = ORIENTED_EDGE('',*,*,#196840,.T.); +#196840 = EDGE_CURVE('',#196832,#196841,#196843,.T.); +#196841 = VERTEX_POINT('',#196842); +#196842 = CARTESIAN_POINT('',(212.97665,-81.8731,1.585)); +#196843 = LINE('',#196844,#196845); +#196844 = CARTESIAN_POINT('',(212.97665,-75.7731,1.585)); +#196845 = VECTOR('',#196846,1.); +#196846 = DIRECTION('',(0.,-1.,0.)); +#196847 = ORIENTED_EDGE('',*,*,#196848,.T.); +#196848 = EDGE_CURVE('',#196841,#196849,#196851,.T.); +#196849 = VERTEX_POINT('',#196850); +#196850 = CARTESIAN_POINT('',(212.91665,-81.9331,1.585)); +#196851 = CIRCLE('',#196852,5.999932016262E-02); +#196852 = AXIS2_PLACEMENT_3D('',#196853,#196854,#196855); +#196853 = CARTESIAN_POINT('',(212.91665067984,-81.87310067984,1.585)); +#196854 = DIRECTION('',(0.,0.,-1.)); +#196855 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#196856 = ORIENTED_EDGE('',*,*,#196857,.T.); +#196857 = EDGE_CURVE('',#196849,#196858,#196860,.T.); +#196858 = VERTEX_POINT('',#196859); +#196859 = CARTESIAN_POINT('',(210.02665,-81.9331,1.585)); +#196860 = LINE('',#196861,#196862); +#196861 = CARTESIAN_POINT('',(212.91665,-81.9331,1.585)); +#196862 = VECTOR('',#196863,1.); +#196863 = DIRECTION('',(-1.,0.,0.)); +#196864 = ORIENTED_EDGE('',*,*,#196865,.T.); +#196865 = EDGE_CURVE('',#196858,#196866,#196868,.T.); +#196866 = VERTEX_POINT('',#196867); +#196867 = CARTESIAN_POINT('',(210.02665,-82.5731,1.585)); +#196868 = LINE('',#196869,#196870); +#196869 = CARTESIAN_POINT('',(210.02665,-81.9331,1.585)); +#196870 = VECTOR('',#196871,1.); +#196871 = DIRECTION('',(0.,-1.,0.)); +#196872 = ORIENTED_EDGE('',*,*,#196873,.T.); +#196873 = EDGE_CURVE('',#196866,#196798,#196874,.T.); +#196874 = LINE('',#196875,#196876); +#196875 = CARTESIAN_POINT('',(210.02665,-82.5731,1.585)); +#196876 = VECTOR('',#196877,1.); +#196877 = DIRECTION('',(1.,0.,0.)); +#196878 = FACE_BOUND('',#196879,.F.); +#196879 = EDGE_LOOP('',(#196880,#196890,#196898,#196906)); +#196880 = ORIENTED_EDGE('',*,*,#196881,.T.); +#196881 = EDGE_CURVE('',#196882,#196884,#196886,.T.); +#196882 = VERTEX_POINT('',#196883); +#196883 = CARTESIAN_POINT('',(208.40665,-82.5631,1.585)); +#196884 = VERTEX_POINT('',#196885); +#196885 = CARTESIAN_POINT('',(208.40665,-80.8831,1.585)); +#196886 = LINE('',#196887,#196888); +#196887 = CARTESIAN_POINT('',(208.40665,-82.5631,1.585)); +#196888 = VECTOR('',#196889,1.); +#196889 = DIRECTION('',(0.,1.,0.)); +#196890 = ORIENTED_EDGE('',*,*,#196891,.T.); +#196891 = EDGE_CURVE('',#196884,#196892,#196894,.T.); +#196892 = VERTEX_POINT('',#196893); +#196893 = CARTESIAN_POINT('',(207.77665,-80.8831,1.585)); +#196894 = LINE('',#196895,#196896); +#196895 = CARTESIAN_POINT('',(208.40665,-80.8831,1.585)); +#196896 = VECTOR('',#196897,1.); +#196897 = DIRECTION('',(-1.,0.,0.)); +#196898 = ORIENTED_EDGE('',*,*,#196899,.T.); +#196899 = EDGE_CURVE('',#196892,#196900,#196902,.T.); +#196900 = VERTEX_POINT('',#196901); +#196901 = CARTESIAN_POINT('',(207.77665,-82.5631,1.585)); +#196902 = LINE('',#196903,#196904); +#196903 = CARTESIAN_POINT('',(207.77665,-80.8831,1.585)); +#196904 = VECTOR('',#196905,1.); +#196905 = DIRECTION('',(0.,-1.,0.)); +#196906 = ORIENTED_EDGE('',*,*,#196907,.T.); +#196907 = EDGE_CURVE('',#196900,#196882,#196908,.T.); +#196908 = LINE('',#196909,#196910); +#196909 = CARTESIAN_POINT('',(207.77665,-82.5631,1.585)); +#196910 = VECTOR('',#196911,1.); +#196911 = DIRECTION('',(1.,0.,0.)); +#196912 = FACE_BOUND('',#196913,.F.); +#196913 = EDGE_LOOP('',(#196914,#196924,#196932,#196940)); +#196914 = ORIENTED_EDGE('',*,*,#196915,.T.); +#196915 = EDGE_CURVE('',#196916,#196918,#196920,.T.); +#196916 = VERTEX_POINT('',#196917); +#196917 = CARTESIAN_POINT('',(208.40665,-79.2631,1.585)); +#196918 = VERTEX_POINT('',#196919); +#196919 = CARTESIAN_POINT('',(208.40665,-78.3831,1.585)); +#196920 = LINE('',#196921,#196922); +#196921 = CARTESIAN_POINT('',(208.40665,-79.2631,1.585)); +#196922 = VECTOR('',#196923,1.); +#196923 = DIRECTION('',(0.,1.,0.)); +#196924 = ORIENTED_EDGE('',*,*,#196925,.T.); +#196925 = EDGE_CURVE('',#196918,#196926,#196928,.T.); +#196926 = VERTEX_POINT('',#196927); +#196927 = CARTESIAN_POINT('',(207.77665,-78.3831,1.585)); +#196928 = LINE('',#196929,#196930); +#196929 = CARTESIAN_POINT('',(208.40665,-78.3831,1.585)); +#196930 = VECTOR('',#196931,1.); +#196931 = DIRECTION('',(-1.,0.,0.)); +#196932 = ORIENTED_EDGE('',*,*,#196933,.T.); +#196933 = EDGE_CURVE('',#196926,#196934,#196936,.T.); +#196934 = VERTEX_POINT('',#196935); +#196935 = CARTESIAN_POINT('',(207.77665,-79.2631,1.585)); +#196936 = LINE('',#196937,#196938); +#196937 = CARTESIAN_POINT('',(207.77665,-78.3831,1.585)); +#196938 = VECTOR('',#196939,1.); +#196939 = DIRECTION('',(0.,-1.,0.)); +#196940 = ORIENTED_EDGE('',*,*,#196941,.T.); +#196941 = EDGE_CURVE('',#196934,#196916,#196942,.T.); +#196942 = LINE('',#196943,#196944); +#196943 = CARTESIAN_POINT('',(207.77665,-79.2631,1.585)); +#196944 = VECTOR('',#196945,1.); +#196945 = DIRECTION('',(1.,0.,0.)); +#196946 = FACE_BOUND('',#196947,.F.); +#196947 = EDGE_LOOP('',(#196948,#196958,#196966,#196974)); +#196948 = ORIENTED_EDGE('',*,*,#196949,.T.); +#196949 = EDGE_CURVE('',#196950,#196952,#196954,.T.); +#196950 = VERTEX_POINT('',#196951); +#196951 = CARTESIAN_POINT('',(208.40665,-76.7631,1.585)); +#196952 = VERTEX_POINT('',#196953); +#196953 = CARTESIAN_POINT('',(208.40665,-75.0831,1.585)); +#196954 = LINE('',#196955,#196956); +#196955 = CARTESIAN_POINT('',(208.40665,-76.7631,1.585)); +#196956 = VECTOR('',#196957,1.); +#196957 = DIRECTION('',(0.,1.,0.)); +#196958 = ORIENTED_EDGE('',*,*,#196959,.T.); +#196959 = EDGE_CURVE('',#196952,#196960,#196962,.T.); +#196960 = VERTEX_POINT('',#196961); +#196961 = CARTESIAN_POINT('',(207.77665,-75.0831,1.585)); +#196962 = LINE('',#196963,#196964); +#196963 = CARTESIAN_POINT('',(208.40665,-75.0831,1.585)); +#196964 = VECTOR('',#196965,1.); +#196965 = DIRECTION('',(-1.,0.,0.)); +#196966 = ORIENTED_EDGE('',*,*,#196967,.T.); +#196967 = EDGE_CURVE('',#196960,#196968,#196970,.T.); +#196968 = VERTEX_POINT('',#196969); +#196969 = CARTESIAN_POINT('',(207.77665,-76.7631,1.585)); +#196970 = LINE('',#196971,#196972); +#196971 = CARTESIAN_POINT('',(207.77665,-75.0831,1.585)); +#196972 = VECTOR('',#196973,1.); +#196973 = DIRECTION('',(0.,-1.,0.)); +#196974 = ORIENTED_EDGE('',*,*,#196975,.T.); +#196975 = EDGE_CURVE('',#196968,#196950,#196976,.T.); +#196976 = LINE('',#196977,#196978); +#196977 = CARTESIAN_POINT('',(207.77665,-76.7631,1.585)); +#196978 = VECTOR('',#196979,1.); +#196979 = DIRECTION('',(1.,0.,0.)); +#196980 = PLANE('',#196981); +#196981 = AXIS2_PLACEMENT_3D('',#196982,#196983,#196984); +#196982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#196983 = DIRECTION('',(0.,0.,1.)); +#196984 = DIRECTION('',(1.,0.,-0.)); +#196985 = SHELL_BASED_SURFACE_MODEL('',(#196986)); +#196986 = OPEN_SHELL('',(#196987)); +#196987 = ADVANCED_FACE('',(#196988),#197173,.T.); +#196988 = FACE_BOUND('',#196989,.F.); +#196989 = EDGE_LOOP('',(#196990,#197001,#197009,#197018,#197026,#197035, + #197043,#197052,#197060,#197068,#197076,#197085,#197093,#197102, + #197110,#197119,#197127,#197135,#197143,#197151,#197159,#197167)); +#196990 = ORIENTED_EDGE('',*,*,#196991,.T.); +#196991 = EDGE_CURVE('',#196992,#196994,#196996,.T.); +#196992 = VERTEX_POINT('',#196993); +#196993 = CARTESIAN_POINT('',(100.959269,-81.330381,1.585)); +#196994 = VERTEX_POINT('',#196995); +#196995 = CARTESIAN_POINT('',(101.419032,-81.333178,1.585)); +#196996 = CIRCLE('',#196997,0.460785175821); +#196997 = AXIS2_PLACEMENT_3D('',#196998,#196999,#197000); +#196998 = CARTESIAN_POINT('',(101.18672110897,-81.73111597024,1.585)); +#196999 = DIRECTION('',(0.,0.,-1.)); +#197000 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#197001 = ORIENTED_EDGE('',*,*,#197002,.T.); +#197002 = EDGE_CURVE('',#196994,#197003,#197005,.T.); +#197003 = VERTEX_POINT('',#197004); +#197004 = CARTESIAN_POINT('',(101.487343,-81.401489,1.585)); +#197005 = LINE('',#197006,#197007); +#197006 = CARTESIAN_POINT('',(101.419032,-81.333178,1.585)); +#197007 = VECTOR('',#197008,1.); +#197008 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#197009 = ORIENTED_EDGE('',*,*,#197010,.T.); +#197010 = EDGE_CURVE('',#197003,#197011,#197013,.T.); +#197011 = VERTEX_POINT('',#197012); +#197012 = CARTESIAN_POINT('',(101.37195,-81.49619,1.585)); +#197013 = CIRCLE('',#197014,7.500003178656E-02); +#197014 = AXIS2_PLACEMENT_3D('',#197015,#197016,#197017); +#197015 = CARTESIAN_POINT('',(101.42498256212,-81.4431565,1.585)); +#197016 = DIRECTION('',(0.,0.,-1.)); +#197017 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#197018 = ORIENTED_EDGE('',*,*,#197019,.T.); +#197019 = EDGE_CURVE('',#197011,#197020,#197022,.T.); +#197020 = VERTEX_POINT('',#197021); +#197021 = CARTESIAN_POINT('',(101.33685,-81.46109,1.585)); +#197022 = LINE('',#197023,#197024); +#197023 = CARTESIAN_POINT('',(101.37195,-81.49619,1.585)); +#197024 = VECTOR('',#197025,1.); +#197025 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197026 = ORIENTED_EDGE('',*,*,#197027,.T.); +#197027 = EDGE_CURVE('',#197020,#197028,#197030,.T.); +#197028 = VERTEX_POINT('',#197029); +#197029 = CARTESIAN_POINT('',(101.036926,-81.46109,1.585)); +#197030 = CIRCLE('',#197031,0.299308637371); +#197031 = AXIS2_PLACEMENT_3D('',#197032,#197033,#197034); +#197032 = CARTESIAN_POINT('',(101.186888,-81.720121,1.585)); +#197033 = DIRECTION('',(0.,0.,1.)); +#197034 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#197035 = ORIENTED_EDGE('',*,*,#197036,.T.); +#197036 = EDGE_CURVE('',#197028,#197037,#197039,.T.); +#197037 = VERTEX_POINT('',#197038); +#197038 = CARTESIAN_POINT('',(100.962813,-81.535203,1.585)); +#197039 = LINE('',#197040,#197041); +#197040 = CARTESIAN_POINT('',(101.036926,-81.46109,1.585)); +#197041 = VECTOR('',#197042,1.); +#197042 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#197043 = ORIENTED_EDGE('',*,*,#197044,.T.); +#197044 = EDGE_CURVE('',#197037,#197045,#197047,.T.); +#197045 = VERTEX_POINT('',#197046); +#197046 = CARTESIAN_POINT('',(100.880936,-81.910113,1.585)); +#197047 = CIRCLE('',#197048,0.611712714363); +#197048 = AXIS2_PLACEMENT_3D('',#197049,#197050,#197051); +#197049 = CARTESIAN_POINT('',(101.48934127521,-81.8465876822,1.585)); +#197050 = DIRECTION('',(0.,0.,1.)); +#197051 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#197052 = ORIENTED_EDGE('',*,*,#197053,.T.); +#197053 = EDGE_CURVE('',#197045,#197054,#197056,.T.); +#197054 = VERTEX_POINT('',#197055); +#197055 = CARTESIAN_POINT('',(100.924319,-82.083647,1.585)); +#197056 = LINE('',#197057,#197058); +#197057 = CARTESIAN_POINT('',(100.880936,-81.910113,1.585)); +#197058 = VECTOR('',#197059,1.); +#197059 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#197060 = ORIENTED_EDGE('',*,*,#197061,.T.); +#197061 = EDGE_CURVE('',#197054,#197062,#197064,.T.); +#197062 = VERTEX_POINT('',#197063); +#197063 = CARTESIAN_POINT('',(100.962813,-82.160634,1.585)); +#197064 = LINE('',#197065,#197066); +#197065 = CARTESIAN_POINT('',(100.924319,-82.083647,1.585)); +#197066 = VECTOR('',#197067,1.); +#197067 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#197068 = ORIENTED_EDGE('',*,*,#197069,.T.); +#197069 = EDGE_CURVE('',#197062,#197070,#197072,.T.); +#197070 = VERTEX_POINT('',#197071); +#197071 = CARTESIAN_POINT('',(101.036926,-82.234748,1.585)); +#197072 = LINE('',#197073,#197074); +#197073 = CARTESIAN_POINT('',(100.962813,-82.160634,1.585)); +#197074 = VECTOR('',#197075,1.); +#197075 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#197076 = ORIENTED_EDGE('',*,*,#197077,.T.); +#197077 = EDGE_CURVE('',#197070,#197078,#197080,.T.); +#197078 = VERTEX_POINT('',#197079); +#197079 = CARTESIAN_POINT('',(101.33685,-82.234747,1.585)); +#197080 = CIRCLE('',#197081,0.299305962385); +#197081 = AXIS2_PLACEMENT_3D('',#197082,#197083,#197084); +#197082 = CARTESIAN_POINT('',(101.18688713635,-81.97571959093,1.585)); +#197083 = DIRECTION('',(0.,0.,1.)); +#197084 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#197085 = ORIENTED_EDGE('',*,*,#197086,.T.); +#197086 = EDGE_CURVE('',#197078,#197087,#197089,.T.); +#197087 = VERTEX_POINT('',#197088); +#197088 = CARTESIAN_POINT('',(101.383315,-82.19032,1.585)); +#197089 = LINE('',#197090,#197091); +#197090 = CARTESIAN_POINT('',(101.33685,-82.234747,1.585)); +#197091 = VECTOR('',#197092,1.); +#197092 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#197093 = ORIENTED_EDGE('',*,*,#197094,.T.); +#197094 = EDGE_CURVE('',#197087,#197095,#197097,.T.); +#197095 = VERTEX_POINT('',#197096); +#197096 = CARTESIAN_POINT('',(101.478016,-82.305713,1.585)); +#197097 = CIRCLE('',#197098,7.499993690111E-02); +#197098 = AXIS2_PLACEMENT_3D('',#197099,#197100,#197101); +#197099 = CARTESIAN_POINT('',(101.4249832483,-82.25267982374,1.585)); +#197100 = DIRECTION('',(0.,0.,-1.)); +#197101 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#197102 = ORIENTED_EDGE('',*,*,#197103,.T.); +#197103 = EDGE_CURVE('',#197095,#197104,#197106,.T.); +#197104 = VERTEX_POINT('',#197105); +#197105 = CARTESIAN_POINT('',(101.414506,-82.365457,1.585)); +#197106 = LINE('',#197107,#197108); +#197107 = CARTESIAN_POINT('',(101.478016,-82.305713,1.585)); +#197108 = VECTOR('',#197109,1.); +#197109 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#197110 = ORIENTED_EDGE('',*,*,#197111,.T.); +#197111 = EDGE_CURVE('',#197104,#197112,#197114,.T.); +#197112 = VERTEX_POINT('',#197113); +#197113 = CARTESIAN_POINT('',(100.954744,-82.362661,1.585)); +#197114 = CIRCLE('',#197115,0.461067828848); +#197115 = AXIS2_PLACEMENT_3D('',#197116,#197117,#197118); +#197116 = CARTESIAN_POINT('',(101.18705551268,-81.96439613352,1.585)); +#197117 = DIRECTION('',(-0.,0.,-1.)); +#197118 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#197119 = ORIENTED_EDGE('',*,*,#197120,.T.); +#197120 = EDGE_CURVE('',#197112,#197121,#197123,.T.); +#197121 = VERTEX_POINT('',#197122); +#197122 = CARTESIAN_POINT('',(100.838055,-82.244898,1.585)); +#197123 = LINE('',#197124,#197125); +#197124 = CARTESIAN_POINT('',(100.954744,-82.362661,1.585)); +#197125 = VECTOR('',#197126,1.); +#197126 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#197127 = ORIENTED_EDGE('',*,*,#197128,.T.); +#197128 = EDGE_CURVE('',#197121,#197129,#197131,.T.); +#197129 = VERTEX_POINT('',#197130); +#197130 = CARTESIAN_POINT('',(100.780794,-82.128013,1.585)); +#197131 = LINE('',#197132,#197133); +#197132 = CARTESIAN_POINT('',(100.838055,-82.244898,1.585)); +#197133 = VECTOR('',#197134,1.); +#197134 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#197135 = ORIENTED_EDGE('',*,*,#197136,.T.); +#197136 = EDGE_CURVE('',#197129,#197137,#197139,.T.); +#197137 = VERTEX_POINT('',#197138); +#197138 = CARTESIAN_POINT('',(100.730936,-81.919347,1.585)); +#197139 = LINE('',#197140,#197141); +#197140 = CARTESIAN_POINT('',(100.780794,-82.128013,1.585)); +#197141 = VECTOR('',#197142,1.); +#197142 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#197143 = ORIENTED_EDGE('',*,*,#197144,.T.); +#197144 = EDGE_CURVE('',#197137,#197145,#197147,.T.); +#197145 = VERTEX_POINT('',#197146); +#197146 = CARTESIAN_POINT('',(100.733175,-81.7583,1.585)); +#197147 = LINE('',#197148,#197149); +#197148 = CARTESIAN_POINT('',(100.730936,-81.919347,1.585)); +#197149 = VECTOR('',#197150,1.); +#197150 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#197151 = ORIENTED_EDGE('',*,*,#197152,.T.); +#197152 = EDGE_CURVE('',#197145,#197153,#197155,.T.); +#197153 = VERTEX_POINT('',#197154); +#197154 = CARTESIAN_POINT('',(100.786473,-81.552473,1.585)); +#197155 = LINE('',#197156,#197157); +#197156 = CARTESIAN_POINT('',(100.733175,-81.7583,1.585)); +#197157 = VECTOR('',#197158,1.); +#197158 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#197159 = ORIENTED_EDGE('',*,*,#197160,.T.); +#197160 = EDGE_CURVE('',#197153,#197161,#197163,.T.); +#197161 = VERTEX_POINT('',#197162); +#197162 = CARTESIAN_POINT('',(100.843422,-81.443492,1.585)); +#197163 = LINE('',#197164,#197165); +#197164 = CARTESIAN_POINT('',(100.786473,-81.552473,1.585)); +#197165 = VECTOR('',#197166,1.); +#197166 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#197167 = ORIENTED_EDGE('',*,*,#197168,.T.); +#197168 = EDGE_CURVE('',#197161,#196992,#197169,.T.); +#197169 = LINE('',#197170,#197171); +#197170 = CARTESIAN_POINT('',(100.843422,-81.443492,1.585)); +#197171 = VECTOR('',#197172,1.); +#197172 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#197173 = PLANE('',#197174); +#197174 = AXIS2_PLACEMENT_3D('',#197175,#197176,#197177); +#197175 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197176 = DIRECTION('',(0.,0.,1.)); +#197177 = DIRECTION('',(1.,0.,-0.)); +#197178 = SHELL_BASED_SURFACE_MODEL('',(#197179)); +#197179 = OPEN_SHELL('',(#197180)); +#197180 = ADVANCED_FACE('',(#197181,#197339),#197409,.T.); +#197181 = FACE_BOUND('',#197182,.F.); +#197182 = EDGE_LOOP('',(#197183,#197194,#197202,#197210,#197218,#197227, + #197235,#197243,#197252,#197260,#197268,#197276,#197284,#197292, + #197300,#197308,#197317,#197325,#197333)); +#197183 = ORIENTED_EDGE('',*,*,#197184,.T.); +#197184 = EDGE_CURVE('',#197185,#197187,#197189,.T.); +#197185 = VERTEX_POINT('',#197186); +#197186 = CARTESIAN_POINT('',(101.861333,-81.33242,1.585)); +#197187 = VERTEX_POINT('',#197188); +#197188 = CARTESIAN_POINT('',(102.329409,-81.337786,1.585)); +#197189 = CIRCLE('',#197190,0.397581403297); +#197190 = AXIS2_PLACEMENT_3D('',#197191,#197192,#197193); +#197191 = CARTESIAN_POINT('',(102.09168687062,-81.65646948161,1.585)); +#197192 = DIRECTION('',(0.,0.,-1.)); +#197193 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#197194 = ORIENTED_EDGE('',*,*,#197195,.T.); +#197195 = EDGE_CURVE('',#197187,#197196,#197198,.T.); +#197196 = VERTEX_POINT('',#197197); +#197197 = CARTESIAN_POINT('',(102.392862,-81.403316,1.585)); +#197198 = LINE('',#197199,#197200); +#197199 = CARTESIAN_POINT('',(102.329409,-81.337786,1.585)); +#197200 = VECTOR('',#197201,1.); +#197201 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#197202 = ORIENTED_EDGE('',*,*,#197203,.T.); +#197203 = EDGE_CURVE('',#197196,#197204,#197206,.T.); +#197204 = VERTEX_POINT('',#197205); +#197205 = CARTESIAN_POINT('',(102.450923,-81.523763,1.585)); +#197206 = LINE('',#197207,#197208); +#197207 = CARTESIAN_POINT('',(102.392862,-81.403316,1.585)); +#197208 = VECTOR('',#197209,1.); +#197209 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#197210 = ORIENTED_EDGE('',*,*,#197211,.T.); +#197211 = EDGE_CURVE('',#197204,#197212,#197214,.T.); +#197212 = VERTEX_POINT('',#197213); +#197213 = CARTESIAN_POINT('',(102.450125,-81.937537,1.585)); +#197214 = LINE('',#197215,#197216); +#197215 = CARTESIAN_POINT('',(102.450923,-81.523763,1.585)); +#197216 = VECTOR('',#197217,1.); +#197217 = DIRECTION('',(-1.928585449894E-03,-0.999998140277,0.)); +#197218 = ORIENTED_EDGE('',*,*,#197219,.T.); +#197219 = EDGE_CURVE('',#197212,#197220,#197222,.T.); +#197220 = VERTEX_POINT('',#197221); +#197221 = CARTESIAN_POINT('',(102.220429,-82.367382,1.585)); +#197222 = CIRCLE('',#197223,0.610117599579); +#197223 = AXIS2_PLACEMENT_3D('',#197224,#197225,#197226); +#197224 = CARTESIAN_POINT('',(101.8419536885,-81.88884263494,1.585)); +#197225 = DIRECTION('',(0.,0.,-1.)); +#197226 = DIRECTION('',(0.996809978793,-7.981144140804E-02,0.)); +#197227 = ORIENTED_EDGE('',*,*,#197228,.T.); +#197228 = EDGE_CURVE('',#197220,#197229,#197231,.T.); +#197229 = VERTEX_POINT('',#197230); +#197230 = CARTESIAN_POINT('',(102.106282,-82.421478,1.585)); +#197231 = LINE('',#197232,#197233); +#197232 = CARTESIAN_POINT('',(102.220429,-82.367382,1.585)); +#197233 = VECTOR('',#197234,1.); +#197234 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#197235 = ORIENTED_EDGE('',*,*,#197236,.T.); +#197236 = EDGE_CURVE('',#197229,#197237,#197239,.T.); +#197237 = VERTEX_POINT('',#197238); +#197238 = CARTESIAN_POINT('',(101.886542,-82.421478,1.585)); +#197239 = LINE('',#197240,#197241); +#197240 = CARTESIAN_POINT('',(102.106282,-82.421478,1.585)); +#197241 = VECTOR('',#197242,1.); +#197242 = DIRECTION('',(-1.,0.,0.)); +#197243 = ORIENTED_EDGE('',*,*,#197244,.T.); +#197244 = EDGE_CURVE('',#197237,#197245,#197247,.T.); +#197245 = VERTEX_POINT('',#197246); +#197246 = CARTESIAN_POINT('',(101.901174,-82.272919,1.585)); +#197247 = CIRCLE('',#197248,7.500006711463E-02); +#197248 = AXIS2_PLACEMENT_3D('',#197249,#197250,#197251); +#197249 = CARTESIAN_POINT('',(101.90117393288,-82.34791906711,1.585)); +#197250 = DIRECTION('',(0.,0.,-1.)); +#197251 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#197252 = ORIENTED_EDGE('',*,*,#197253,.T.); +#197253 = EDGE_CURVE('',#197245,#197254,#197256,.T.); +#197254 = VERTEX_POINT('',#197255); +#197255 = CARTESIAN_POINT('',(102.073945,-82.272919,1.585)); +#197256 = LINE('',#197257,#197258); +#197257 = CARTESIAN_POINT('',(101.901174,-82.272919,1.585)); +#197258 = VECTOR('',#197259,1.); +#197259 = DIRECTION('',(1.,0.,0.)); +#197260 = ORIENTED_EDGE('',*,*,#197261,.T.); +#197261 = EDGE_CURVE('',#197254,#197262,#197264,.T.); +#197262 = VERTEX_POINT('',#197263); +#197263 = CARTESIAN_POINT('',(102.14246,-82.238661,1.585)); +#197264 = LINE('',#197265,#197266); +#197265 = CARTESIAN_POINT('',(102.073945,-82.272919,1.585)); +#197266 = VECTOR('',#197267,1.); +#197267 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#197268 = ORIENTED_EDGE('',*,*,#197269,.T.); +#197269 = EDGE_CURVE('',#197262,#197270,#197272,.T.); +#197270 = VERTEX_POINT('',#197271); +#197271 = CARTESIAN_POINT('',(102.17622,-82.2049,1.585)); +#197272 = LINE('',#197273,#197274); +#197273 = CARTESIAN_POINT('',(102.14246,-82.238661,1.585)); +#197274 = VECTOR('',#197275,1.); +#197275 = DIRECTION('',(0.707096308711,0.707117253507,0.)); +#197276 = ORIENTED_EDGE('',*,*,#197277,.T.); +#197277 = EDGE_CURVE('',#197270,#197278,#197280,.T.); +#197278 = VERTEX_POINT('',#197279); +#197279 = CARTESIAN_POINT('',(102.260135,-82.079029,1.585)); +#197280 = LINE('',#197281,#197282); +#197281 = CARTESIAN_POINT('',(102.17622,-82.2049,1.585)); +#197282 = VECTOR('',#197283,1.); +#197283 = DIRECTION('',(0.55470477259,0.83204724341,0.)); +#197284 = ORIENTED_EDGE('',*,*,#197285,.T.); +#197285 = EDGE_CURVE('',#197278,#197286,#197288,.T.); +#197286 = VERTEX_POINT('',#197287); +#197287 = CARTESIAN_POINT('',(102.278659,-82.004933,1.585)); +#197288 = LINE('',#197289,#197290); +#197289 = CARTESIAN_POINT('',(102.260135,-82.079029,1.585)); +#197290 = VECTOR('',#197291,1.); +#197291 = DIRECTION('',(0.242535625036,0.970142500145,0.)); +#197292 = ORIENTED_EDGE('',*,*,#197293,.T.); +#197293 = EDGE_CURVE('',#197286,#197294,#197296,.T.); +#197294 = VERTEX_POINT('',#197295); +#197295 = CARTESIAN_POINT('',(102.20152,-82.040525,1.585)); +#197296 = LINE('',#197297,#197298); +#197297 = CARTESIAN_POINT('',(102.278659,-82.004933,1.585)); +#197298 = VECTOR('',#197299,1.); +#197299 = DIRECTION('',(-0.90800692221,-0.418955163734,0.)); +#197300 = ORIENTED_EDGE('',*,*,#197301,.T.); +#197301 = EDGE_CURVE('',#197294,#197302,#197304,.T.); +#197302 = VERTEX_POINT('',#197303); +#197303 = CARTESIAN_POINT('',(101.976602,-82.039303,1.585)); +#197304 = LINE('',#197305,#197306); +#197305 = CARTESIAN_POINT('',(102.20152,-82.040525,1.585)); +#197306 = VECTOR('',#197307,1.); +#197307 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#197308 = ORIENTED_EDGE('',*,*,#197309,.T.); +#197309 = EDGE_CURVE('',#197302,#197310,#197312,.T.); +#197310 = VERTEX_POINT('',#197311); +#197311 = CARTESIAN_POINT('',(101.732377,-81.791122,1.585)); +#197312 = CIRCLE('',#197313,0.348628078749); +#197313 = AXIS2_PLACEMENT_3D('',#197314,#197315,#197316); +#197314 = CARTESIAN_POINT('',(102.0697770302,-81.70335664857,1.585)); +#197315 = DIRECTION('',(0.,0.,-1.)); +#197316 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#197317 = ORIENTED_EDGE('',*,*,#197318,.T.); +#197318 = EDGE_CURVE('',#197310,#197319,#197321,.T.); +#197319 = VERTEX_POINT('',#197320); +#197320 = CARTESIAN_POINT('',(101.733599,-81.518586,1.585)); +#197321 = LINE('',#197322,#197323); +#197322 = CARTESIAN_POINT('',(101.732377,-81.791122,1.585)); +#197323 = VECTOR('',#197324,1.); +#197324 = DIRECTION('',(4.483766241139E-03,0.99998994787,0.)); +#197325 = ORIENTED_EDGE('',*,*,#197326,.T.); +#197326 = EDGE_CURVE('',#197319,#197327,#197329,.T.); +#197327 = VERTEX_POINT('',#197328); +#197328 = CARTESIAN_POINT('',(101.795803,-81.395873,1.585)); +#197329 = LINE('',#197330,#197331); +#197330 = CARTESIAN_POINT('',(101.733599,-81.518586,1.585)); +#197331 = VECTOR('',#197332,1.); +#197332 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#197333 = ORIENTED_EDGE('',*,*,#197334,.T.); +#197334 = EDGE_CURVE('',#197327,#197185,#197335,.T.); +#197335 = LINE('',#197336,#197337); +#197336 = CARTESIAN_POINT('',(101.795803,-81.395873,1.585)); +#197337 = VECTOR('',#197338,1.); +#197338 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#197339 = FACE_BOUND('',#197340,.F.); +#197340 = EDGE_LOOP('',(#197341,#197352,#197360,#197369,#197377,#197386, + #197394,#197403)); +#197341 = ORIENTED_EDGE('',*,*,#197342,.T.); +#197342 = EDGE_CURVE('',#197343,#197345,#197347,.T.); +#197343 = VERTEX_POINT('',#197344); +#197344 = CARTESIAN_POINT('',(102.237699,-81.457177,1.585)); +#197345 = VERTEX_POINT('',#197346); +#197346 = CARTESIAN_POINT('',(101.945601,-81.457177,1.585)); +#197347 = CIRCLE('',#197348,0.252889603602); +#197348 = AXIS2_PLACEMENT_3D('',#197349,#197350,#197351); +#197349 = CARTESIAN_POINT('',(102.09165,-81.66363,1.585)); +#197350 = DIRECTION('',(0.,0.,1.)); +#197351 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#197352 = ORIENTED_EDGE('',*,*,#197353,.T.); +#197353 = EDGE_CURVE('',#197345,#197354,#197356,.T.); +#197354 = VERTEX_POINT('',#197355); +#197355 = CARTESIAN_POINT('',(101.915194,-81.487584,1.585)); +#197356 = LINE('',#197357,#197358); +#197357 = CARTESIAN_POINT('',(101.945601,-81.457177,1.585)); +#197358 = VECTOR('',#197359,1.); +#197359 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#197360 = ORIENTED_EDGE('',*,*,#197361,.T.); +#197361 = EDGE_CURVE('',#197354,#197362,#197364,.T.); +#197362 = VERTEX_POINT('',#197363); +#197363 = CARTESIAN_POINT('',(101.915194,-81.827301,1.585)); +#197364 = CIRCLE('',#197365,0.305621483548); +#197365 = AXIS2_PLACEMENT_3D('',#197366,#197367,#197368); +#197366 = CARTESIAN_POINT('',(102.169266,-81.6574425,1.585)); +#197367 = DIRECTION('',(0.,0.,1.)); +#197368 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#197369 = ORIENTED_EDGE('',*,*,#197370,.T.); +#197370 = EDGE_CURVE('',#197362,#197371,#197373,.T.); +#197371 = VERTEX_POINT('',#197372); +#197372 = CARTESIAN_POINT('',(101.945601,-81.857708,1.585)); +#197373 = LINE('',#197374,#197375); +#197374 = CARTESIAN_POINT('',(101.915194,-81.827301,1.585)); +#197375 = VECTOR('',#197376,1.); +#197376 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#197377 = ORIENTED_EDGE('',*,*,#197378,.T.); +#197378 = EDGE_CURVE('',#197371,#197379,#197381,.T.); +#197379 = VERTEX_POINT('',#197380); +#197380 = CARTESIAN_POINT('',(102.237699,-81.857708,1.585)); +#197381 = CIRCLE('',#197382,0.252889603602); +#197382 = AXIS2_PLACEMENT_3D('',#197383,#197384,#197385); +#197383 = CARTESIAN_POINT('',(102.09165,-81.651255,1.585)); +#197384 = DIRECTION('',(0.,0.,1.)); +#197385 = DIRECTION('',(-0.577520775547,-0.816375988018,0.)); +#197386 = ORIENTED_EDGE('',*,*,#197387,.T.); +#197387 = EDGE_CURVE('',#197379,#197388,#197390,.T.); +#197388 = VERTEX_POINT('',#197389); +#197389 = CARTESIAN_POINT('',(102.268106,-81.827301,1.585)); +#197390 = LINE('',#197391,#197392); +#197391 = CARTESIAN_POINT('',(102.237699,-81.857708,1.585)); +#197392 = VECTOR('',#197393,1.); +#197393 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#197394 = ORIENTED_EDGE('',*,*,#197395,.T.); +#197395 = EDGE_CURVE('',#197388,#197396,#197398,.T.); +#197396 = VERTEX_POINT('',#197397); +#197397 = CARTESIAN_POINT('',(102.268106,-81.487584,1.585)); +#197398 = CIRCLE('',#197399,0.305621483548); +#197399 = AXIS2_PLACEMENT_3D('',#197400,#197401,#197402); +#197400 = CARTESIAN_POINT('',(102.014034,-81.6574425,1.585)); +#197401 = DIRECTION('',(0.,-0.,1.)); +#197402 = DIRECTION('',(0.831328992485,-0.555780627814,-0.)); +#197403 = ORIENTED_EDGE('',*,*,#197404,.T.); +#197404 = EDGE_CURVE('',#197396,#197343,#197405,.T.); +#197405 = LINE('',#197406,#197407); +#197406 = CARTESIAN_POINT('',(102.268106,-81.487584,1.585)); +#197407 = VECTOR('',#197408,1.); +#197408 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197409 = PLANE('',#197410); +#197410 = AXIS2_PLACEMENT_3D('',#197411,#197412,#197413); +#197411 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197412 = DIRECTION('',(0.,0.,1.)); +#197413 = DIRECTION('',(1.,0.,-0.)); +#197414 = SHELL_BASED_SURFACE_MODEL('',(#197415)); +#197415 = OPEN_SHELL('',(#197416)); +#197416 = ADVANCED_FACE('',(#197417,#197533),#197616,.T.); +#197417 = FACE_BOUND('',#197418,.F.); +#197418 = EDGE_LOOP('',(#197419,#197430,#197438,#197446,#197454,#197462, + #197470,#197478,#197486,#197494,#197502,#197510,#197518,#197527)); +#197419 = ORIENTED_EDGE('',*,*,#197420,.T.); +#197420 = EDGE_CURVE('',#197421,#197423,#197425,.T.); +#197421 = VERTEX_POINT('',#197422); +#197422 = CARTESIAN_POINT('',(94.379996,-80.763287,1.585)); +#197423 = VERTEX_POINT('',#197424); +#197424 = CARTESIAN_POINT('',(94.453555,-80.702919,1.585)); +#197425 = CIRCLE('',#197426,7.500074938981E-02); +#197426 = AXIS2_PLACEMENT_3D('',#197427,#197428,#197429); +#197427 = CARTESIAN_POINT('',(94.45355546611,-80.77791974938,1.585)); +#197428 = DIRECTION('',(0.,0.,-1.)); +#197429 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#197430 = ORIENTED_EDGE('',*,*,#197431,.T.); +#197431 = EDGE_CURVE('',#197423,#197432,#197434,.T.); +#197432 = VERTEX_POINT('',#197433); +#197433 = CARTESIAN_POINT('',(94.699055,-80.703648,1.585)); +#197434 = LINE('',#197435,#197436); +#197435 = CARTESIAN_POINT('',(94.453555,-80.702919,1.585)); +#197436 = VECTOR('',#197437,1.); +#197437 = DIRECTION('',(0.999995591212,-2.969437010185E-03,0.)); +#197438 = ORIENTED_EDGE('',*,*,#197439,.T.); +#197439 = EDGE_CURVE('',#197432,#197440,#197442,.T.); +#197440 = VERTEX_POINT('',#197441); +#197441 = CARTESIAN_POINT('',(94.876175,-80.763178,1.585)); +#197442 = LINE('',#197443,#197444); +#197443 = CARTESIAN_POINT('',(94.699055,-80.703648,1.585)); +#197444 = VECTOR('',#197445,1.); +#197445 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#197446 = ORIENTED_EDGE('',*,*,#197447,.T.); +#197447 = EDGE_CURVE('',#197440,#197448,#197450,.T.); +#197448 = VERTEX_POINT('',#197449); +#197449 = CARTESIAN_POINT('',(94.992864,-80.88094,1.585)); +#197450 = LINE('',#197451,#197452); +#197451 = CARTESIAN_POINT('',(94.876175,-80.763178,1.585)); +#197452 = VECTOR('',#197453,1.); +#197453 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#197454 = ORIENTED_EDGE('',*,*,#197455,.T.); +#197455 = EDGE_CURVE('',#197448,#197456,#197458,.T.); +#197456 = VERTEX_POINT('',#197457); +#197457 = CARTESIAN_POINT('',(95.050125,-80.997824,1.585)); +#197458 = LINE('',#197459,#197460); +#197459 = CARTESIAN_POINT('',(94.992864,-80.88094,1.585)); +#197460 = VECTOR('',#197461,1.); +#197461 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#197462 = ORIENTED_EDGE('',*,*,#197463,.T.); +#197463 = EDGE_CURVE('',#197456,#197464,#197466,.T.); +#197464 = VERTEX_POINT('',#197465); +#197465 = CARTESIAN_POINT('',(95.099983,-81.20649,1.585)); +#197466 = LINE('',#197467,#197468); +#197467 = CARTESIAN_POINT('',(95.050125,-80.997824,1.585)); +#197468 = VECTOR('',#197469,1.); +#197469 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#197470 = ORIENTED_EDGE('',*,*,#197471,.T.); +#197471 = EDGE_CURVE('',#197464,#197472,#197474,.T.); +#197472 = VERTEX_POINT('',#197473); +#197473 = CARTESIAN_POINT('',(95.097744,-81.367537,1.585)); +#197474 = LINE('',#197475,#197476); +#197475 = CARTESIAN_POINT('',(95.099983,-81.20649,1.585)); +#197476 = VECTOR('',#197477,1.); +#197477 = DIRECTION('',(-1.390143030559E-02,-0.999903370449,0.)); +#197478 = ORIENTED_EDGE('',*,*,#197479,.T.); +#197479 = EDGE_CURVE('',#197472,#197480,#197482,.T.); +#197480 = VERTEX_POINT('',#197481); +#197481 = CARTESIAN_POINT('',(95.044446,-81.573364,1.585)); +#197482 = LINE('',#197483,#197484); +#197483 = CARTESIAN_POINT('',(95.097744,-81.367537,1.585)); +#197484 = VECTOR('',#197485,1.); +#197485 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#197486 = ORIENTED_EDGE('',*,*,#197487,.T.); +#197487 = EDGE_CURVE('',#197480,#197488,#197490,.T.); +#197488 = VERTEX_POINT('',#197489); +#197489 = CARTESIAN_POINT('',(94.987496,-81.682344,1.585)); +#197490 = LINE('',#197491,#197492); +#197491 = CARTESIAN_POINT('',(95.044446,-81.573364,1.585)); +#197492 = VECTOR('',#197493,1.); +#197493 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#197494 = ORIENTED_EDGE('',*,*,#197495,.T.); +#197495 = EDGE_CURVE('',#197488,#197496,#197498,.T.); +#197496 = VERTEX_POINT('',#197497); +#197497 = CARTESIAN_POINT('',(94.871649,-81.795457,1.585)); +#197498 = LINE('',#197499,#197500); +#197499 = CARTESIAN_POINT('',(94.987496,-81.682344,1.585)); +#197500 = VECTOR('',#197501,1.); +#197501 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#197502 = ORIENTED_EDGE('',*,*,#197503,.T.); +#197503 = EDGE_CURVE('',#197496,#197504,#197506,.T.); +#197504 = VERTEX_POINT('',#197505); +#197505 = CARTESIAN_POINT('',(94.699055,-81.852189,1.585)); +#197506 = LINE('',#197507,#197508); +#197507 = CARTESIAN_POINT('',(94.871649,-81.795457,1.585)); +#197508 = VECTOR('',#197509,1.); +#197509 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#197510 = ORIENTED_EDGE('',*,*,#197511,.T.); +#197511 = EDGE_CURVE('',#197504,#197512,#197514,.T.); +#197512 = VERTEX_POINT('',#197513); +#197513 = CARTESIAN_POINT('',(94.438923,-81.851478,1.585)); +#197514 = LINE('',#197515,#197516); +#197515 = CARTESIAN_POINT('',(94.699055,-81.852189,1.585)); +#197516 = VECTOR('',#197517,1.); +#197517 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#197518 = ORIENTED_EDGE('',*,*,#197519,.T.); +#197519 = EDGE_CURVE('',#197512,#197520,#197522,.T.); +#197520 = VERTEX_POINT('',#197521); +#197521 = CARTESIAN_POINT('',(94.378555,-81.777919,1.585)); +#197522 = CIRCLE('',#197523,7.500074938984E-02); +#197523 = AXIS2_PLACEMENT_3D('',#197524,#197525,#197526); +#197524 = CARTESIAN_POINT('',(94.453555749388,-81.77791853389,1.585)); +#197525 = DIRECTION('',(0.,0.,-1.)); +#197526 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#197527 = ORIENTED_EDGE('',*,*,#197528,.T.); +#197528 = EDGE_CURVE('',#197520,#197421,#197529,.T.); +#197529 = LINE('',#197530,#197531); +#197530 = CARTESIAN_POINT('',(94.378555,-81.777919,1.585)); +#197531 = VECTOR('',#197532,1.); +#197532 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#197533 = FACE_BOUND('',#197534,.F.); +#197534 = EDGE_LOOP('',(#197535,#197545,#197553,#197561,#197569,#197577, + #197585,#197594,#197602,#197610)); +#197535 = ORIENTED_EDGE('',*,*,#197536,.T.); +#197536 = EDGE_CURVE('',#197537,#197539,#197541,.T.); +#197537 = VERTEX_POINT('',#197538); +#197538 = CARTESIAN_POINT('',(94.793993,-80.89109,1.585)); +#197539 = VERTEX_POINT('',#197540); +#197540 = CARTESIAN_POINT('',(94.67948,-80.852919,1.585)); +#197541 = LINE('',#197542,#197543); +#197542 = CARTESIAN_POINT('',(94.793993,-80.89109,1.585)); +#197543 = VECTOR('',#197544,1.); +#197544 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#197545 = ORIENTED_EDGE('',*,*,#197546,.T.); +#197546 = EDGE_CURVE('',#197539,#197547,#197549,.T.); +#197547 = VERTEX_POINT('',#197548); +#197548 = CARTESIAN_POINT('',(94.528555,-80.852919,1.585)); +#197549 = LINE('',#197550,#197551); +#197550 = CARTESIAN_POINT('',(94.67948,-80.852919,1.585)); +#197551 = VECTOR('',#197552,1.); +#197552 = DIRECTION('',(-1.,0.,0.)); +#197553 = ORIENTED_EDGE('',*,*,#197554,.T.); +#197554 = EDGE_CURVE('',#197547,#197555,#197557,.T.); +#197555 = VERTEX_POINT('',#197556); +#197556 = CARTESIAN_POINT('',(94.528555,-81.702919,1.585)); +#197557 = LINE('',#197558,#197559); +#197558 = CARTESIAN_POINT('',(94.528555,-80.852919,1.585)); +#197559 = VECTOR('',#197560,1.); +#197560 = DIRECTION('',(0.,-1.,0.)); +#197561 = ORIENTED_EDGE('',*,*,#197562,.T.); +#197562 = EDGE_CURVE('',#197555,#197563,#197565,.T.); +#197563 = VERTEX_POINT('',#197564); +#197564 = CARTESIAN_POINT('',(94.67948,-81.702919,1.585)); +#197565 = LINE('',#197566,#197567); +#197566 = CARTESIAN_POINT('',(94.528555,-81.702919,1.585)); +#197567 = VECTOR('',#197568,1.); +#197568 = DIRECTION('',(1.,0.,0.)); +#197569 = ORIENTED_EDGE('',*,*,#197570,.T.); +#197570 = EDGE_CURVE('',#197563,#197571,#197573,.T.); +#197571 = VERTEX_POINT('',#197572); +#197572 = CARTESIAN_POINT('',(94.793993,-81.664747,1.585)); +#197573 = LINE('',#197574,#197575); +#197574 = CARTESIAN_POINT('',(94.67948,-81.702919,1.585)); +#197575 = VECTOR('',#197576,1.); +#197576 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#197577 = ORIENTED_EDGE('',*,*,#197578,.T.); +#197578 = EDGE_CURVE('',#197571,#197579,#197581,.T.); +#197579 = VERTEX_POINT('',#197580); +#197580 = CARTESIAN_POINT('',(94.868105,-81.590634,1.585)); +#197581 = LINE('',#197582,#197583); +#197582 = CARTESIAN_POINT('',(94.793993,-81.664747,1.585)); +#197583 = VECTOR('',#197584,1.); +#197584 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#197585 = ORIENTED_EDGE('',*,*,#197586,.T.); +#197586 = EDGE_CURVE('',#197579,#197587,#197589,.T.); +#197587 = VERTEX_POINT('',#197588); +#197588 = CARTESIAN_POINT('',(94.949983,-81.215724,1.585)); +#197589 = CIRCLE('',#197590,0.611719141131); +#197590 = AXIS2_PLACEMENT_3D('',#197591,#197592,#197593); +#197591 = CARTESIAN_POINT('',(94.341570962243,-81.27924643649,1.585)); +#197592 = DIRECTION('',(0.,0.,1.)); +#197593 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#197594 = ORIENTED_EDGE('',*,*,#197595,.T.); +#197595 = EDGE_CURVE('',#197587,#197596,#197598,.T.); +#197596 = VERTEX_POINT('',#197597); +#197597 = CARTESIAN_POINT('',(94.906599,-81.04219,1.585)); +#197598 = LINE('',#197599,#197600); +#197599 = CARTESIAN_POINT('',(94.949983,-81.215724,1.585)); +#197600 = VECTOR('',#197601,1.); +#197601 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#197602 = ORIENTED_EDGE('',*,*,#197603,.T.); +#197603 = EDGE_CURVE('',#197596,#197604,#197606,.T.); +#197604 = VERTEX_POINT('',#197605); +#197605 = CARTESIAN_POINT('',(94.868106,-80.965203,1.585)); +#197606 = LINE('',#197607,#197608); +#197607 = CARTESIAN_POINT('',(94.906599,-81.04219,1.585)); +#197608 = VECTOR('',#197609,1.); +#197609 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#197610 = ORIENTED_EDGE('',*,*,#197611,.T.); +#197611 = EDGE_CURVE('',#197604,#197537,#197612,.T.); +#197612 = LINE('',#197613,#197614); +#197613 = CARTESIAN_POINT('',(94.868106,-80.965203,1.585)); +#197614 = VECTOR('',#197615,1.); +#197615 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197616 = PLANE('',#197617); +#197617 = AXIS2_PLACEMENT_3D('',#197618,#197619,#197620); +#197618 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197619 = DIRECTION('',(0.,0.,1.)); +#197620 = DIRECTION('',(1.,0.,-0.)); +#197621 = SHELL_BASED_SURFACE_MODEL('',(#197622)); +#197622 = OPEN_SHELL('',(#197623)); +#197623 = ADVANCED_FACE('',(#197624),#197819,.T.); +#197624 = FACE_BOUND('',#197625,.F.); +#197625 = EDGE_LOOP('',(#197626,#197637,#197645,#197654,#197662,#197670, + #197678,#197686,#197695,#197703,#197712,#197720,#197728,#197736, + #197745,#197753,#197762,#197770,#197779,#197787,#197796,#197804, + #197813)); +#197626 = ORIENTED_EDGE('',*,*,#197627,.T.); +#197627 = EDGE_CURVE('',#197628,#197630,#197632,.T.); +#197628 = VERTEX_POINT('',#197629); +#197629 = CARTESIAN_POINT('',(95.381817,-80.75604,1.585)); +#197630 = VERTEX_POINT('',#197631); +#197631 = CARTESIAN_POINT('',(95.453555,-80.702919,1.585)); +#197632 = CIRCLE('',#197633,7.500336100772E-02); +#197633 = AXIS2_PLACEMENT_3D('',#197634,#197635,#197636); +#197634 = CARTESIAN_POINT('',(95.453557270704,-80.77792236097,1.585)); +#197635 = DIRECTION('',(0.,0.,-1.)); +#197636 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#197637 = ORIENTED_EDGE('',*,*,#197638,.T.); +#197638 = EDGE_CURVE('',#197630,#197639,#197641,.T.); +#197639 = VERTEX_POINT('',#197640); +#197640 = CARTESIAN_POINT('',(95.944377,-80.70436,1.585)); +#197641 = LINE('',#197642,#197643); +#197642 = CARTESIAN_POINT('',(95.453555,-80.702919,1.585)); +#197643 = VECTOR('',#197644,1.); +#197644 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#197645 = ORIENTED_EDGE('',*,*,#197646,.T.); +#197646 = EDGE_CURVE('',#197639,#197647,#197649,.T.); +#197647 = VERTEX_POINT('',#197648); +#197648 = CARTESIAN_POINT('',(95.929745,-80.852919,1.585)); +#197649 = CIRCLE('',#197650,7.500006711464E-02); +#197650 = AXIS2_PLACEMENT_3D('',#197651,#197652,#197653); +#197651 = CARTESIAN_POINT('',(95.929745067115,-80.77791893288,1.585)); +#197652 = DIRECTION('',(0.,0.,-1.)); +#197653 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#197654 = ORIENTED_EDGE('',*,*,#197655,.T.); +#197655 = EDGE_CURVE('',#197647,#197656,#197658,.T.); +#197656 = VERTEX_POINT('',#197657); +#197657 = CARTESIAN_POINT('',(95.521429,-80.852919,1.585)); +#197658 = LINE('',#197659,#197660); +#197659 = CARTESIAN_POINT('',(95.929745,-80.852919,1.585)); +#197660 = VECTOR('',#197661,1.); +#197661 = DIRECTION('',(-1.,0.,0.)); +#197662 = ORIENTED_EDGE('',*,*,#197663,.T.); +#197663 = EDGE_CURVE('',#197656,#197664,#197666,.T.); +#197664 = VERTEX_POINT('',#197665); +#197665 = CARTESIAN_POINT('',(95.49661,-81.101109,1.585)); +#197666 = LINE('',#197667,#197668); +#197667 = CARTESIAN_POINT('',(95.521429,-80.852919,1.585)); +#197668 = VECTOR('',#197669,1.); +#197669 = DIRECTION('',(-9.950371902098E-02,-0.99503719021,0.)); +#197670 = ORIENTED_EDGE('',*,*,#197671,.T.); +#197671 = EDGE_CURVE('',#197664,#197672,#197674,.T.); +#197672 = VERTEX_POINT('',#197673); +#197673 = CARTESIAN_POINT('',(95.534161,-81.085312,1.585)); +#197674 = LINE('',#197675,#197676); +#197675 = CARTESIAN_POINT('',(95.49661,-81.101109,1.585)); +#197676 = VECTOR('',#197677,1.); +#197677 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#197678 = ORIENTED_EDGE('',*,*,#197679,.T.); +#197679 = EDGE_CURVE('',#197672,#197680,#197682,.T.); +#197680 = VERTEX_POINT('',#197681); +#197681 = CARTESIAN_POINT('',(95.806697,-81.086534,1.585)); +#197682 = LINE('',#197683,#197684); +#197683 = CARTESIAN_POINT('',(95.534161,-81.085312,1.585)); +#197684 = VECTOR('',#197685,1.); +#197685 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#197686 = ORIENTED_EDGE('',*,*,#197687,.T.); +#197687 = EDGE_CURVE('',#197680,#197688,#197690,.T.); +#197688 = VERTEX_POINT('',#197689); +#197689 = CARTESIAN_POINT('',(96.050923,-81.334715,1.585)); +#197690 = CIRCLE('',#197691,0.348625649748); +#197691 = AXIS2_PLACEMENT_3D('',#197692,#197693,#197694); +#197692 = CARTESIAN_POINT('',(95.713525045865,-81.42247868387,1.585)); +#197693 = DIRECTION('',(0.,0.,-1.)); +#197694 = DIRECTION('',(0.267255017531,0.963625837971,0.)); +#197695 = ORIENTED_EDGE('',*,*,#197696,.T.); +#197696 = EDGE_CURVE('',#197688,#197697,#197699,.T.); +#197697 = VERTEX_POINT('',#197698); +#197698 = CARTESIAN_POINT('',(96.049701,-81.607252,1.585)); +#197699 = LINE('',#197700,#197701); +#197700 = CARTESIAN_POINT('',(96.050923,-81.334715,1.585)); +#197701 = VECTOR('',#197702,1.); +#197702 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#197703 = ORIENTED_EDGE('',*,*,#197704,.T.); +#197704 = EDGE_CURVE('',#197697,#197705,#197707,.T.); +#197705 = VERTEX_POINT('',#197706); +#197706 = CARTESIAN_POINT('',(95.80152,-81.851478,1.585)); +#197707 = CIRCLE('',#197708,0.348635327447); +#197708 = AXIS2_PLACEMENT_3D('',#197709,#197710,#197711); +#197709 = CARTESIAN_POINT('',(95.713748481291,-81.51407208415,1.585)); +#197710 = DIRECTION('',(0.,0.,-1.)); +#197711 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#197712 = ORIENTED_EDGE('',*,*,#197713,.T.); +#197713 = EDGE_CURVE('',#197705,#197714,#197716,.T.); +#197714 = VERTEX_POINT('',#197715); +#197715 = CARTESIAN_POINT('',(95.528983,-81.850256,1.585)); +#197716 = LINE('',#197717,#197718); +#197717 = CARTESIAN_POINT('',(95.80152,-81.851478,1.585)); +#197718 = VECTOR('',#197719,1.); +#197719 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#197720 = ORIENTED_EDGE('',*,*,#197721,.T.); +#197721 = EDGE_CURVE('',#197714,#197722,#197724,.T.); +#197722 = VERTEX_POINT('',#197723); +#197723 = CARTESIAN_POINT('',(95.40627,-81.78805,1.585)); +#197724 = LINE('',#197725,#197726); +#197725 = CARTESIAN_POINT('',(95.528983,-81.850256,1.585)); +#197726 = VECTOR('',#197727,1.); +#197727 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#197728 = ORIENTED_EDGE('',*,*,#197729,.T.); +#197729 = EDGE_CURVE('',#197722,#197730,#197732,.T.); +#197730 = VERTEX_POINT('',#197731); +#197731 = CARTESIAN_POINT('',(95.343575,-81.724347,1.585)); +#197732 = LINE('',#197733,#197734); +#197733 = CARTESIAN_POINT('',(95.40627,-81.78805,1.585)); +#197734 = VECTOR('',#197735,1.); +#197735 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#197736 = ORIENTED_EDGE('',*,*,#197737,.T.); +#197737 = EDGE_CURVE('',#197730,#197738,#197740,.T.); +#197738 = VERTEX_POINT('',#197739); +#197739 = CARTESIAN_POINT('',(95.45897,-81.629648,1.585)); +#197740 = CIRCLE('',#197741,7.50001266804E-02); +#197741 = AXIS2_PLACEMENT_3D('',#197742,#197743,#197744); +#197742 = CARTESIAN_POINT('',(95.405936051994,-81.68268024831,1.585)); +#197743 = DIRECTION('',(0.,0.,-1.)); +#197744 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#197745 = ORIENTED_EDGE('',*,*,#197746,.T.); +#197746 = EDGE_CURVE('',#197738,#197747,#197749,.T.); +#197747 = VERTEX_POINT('',#197748); +#197748 = CARTESIAN_POINT('',(95.497982,-81.668661,1.585)); +#197749 = LINE('',#197750,#197751); +#197750 = CARTESIAN_POINT('',(95.45897,-81.629648,1.585)); +#197751 = VECTOR('',#197752,1.); +#197752 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#197753 = ORIENTED_EDGE('',*,*,#197754,.T.); +#197754 = EDGE_CURVE('',#197747,#197755,#197757,.T.); +#197755 = VERTEX_POINT('',#197756); +#197756 = CARTESIAN_POINT('',(95.837698,-81.668661,1.585)); +#197757 = CIRCLE('',#197758,0.305620374329); +#197758 = AXIS2_PLACEMENT_3D('',#197759,#197760,#197761); +#197759 = CARTESIAN_POINT('',(95.66784,-81.41459,1.585)); +#197760 = DIRECTION('',(0.,0.,1.)); +#197761 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#197762 = ORIENTED_EDGE('',*,*,#197763,.T.); +#197763 = EDGE_CURVE('',#197755,#197764,#197766,.T.); +#197764 = VERTEX_POINT('',#197765); +#197765 = CARTESIAN_POINT('',(95.868105,-81.638253,1.585)); +#197766 = LINE('',#197767,#197768); +#197767 = CARTESIAN_POINT('',(95.837698,-81.668661,1.585)); +#197768 = VECTOR('',#197769,1.); +#197769 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#197770 = ORIENTED_EDGE('',*,*,#197771,.T.); +#197771 = EDGE_CURVE('',#197764,#197772,#197774,.T.); +#197772 = VERTEX_POINT('',#197773); +#197773 = CARTESIAN_POINT('',(95.868106,-81.298536,1.585)); +#197774 = CIRCLE('',#197775,0.305616146029); +#197775 = AXIS2_PLACEMENT_3D('',#197776,#197777,#197778); +#197776 = CARTESIAN_POINT('',(95.614039920493,-81.46839375212,1.585)); +#197777 = DIRECTION('',(0.,-0.,1.)); +#197778 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#197779 = ORIENTED_EDGE('',*,*,#197780,.T.); +#197780 = EDGE_CURVE('',#197772,#197781,#197783,.T.); +#197781 = VERTEX_POINT('',#197782); +#197782 = CARTESIAN_POINT('',(95.837699,-81.268129,1.585)); +#197783 = LINE('',#197784,#197785); +#197784 = CARTESIAN_POINT('',(95.868106,-81.298536,1.585)); +#197785 = VECTOR('',#197786,1.); +#197786 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#197787 = ORIENTED_EDGE('',*,*,#197788,.T.); +#197788 = EDGE_CURVE('',#197781,#197789,#197791,.T.); +#197789 = VERTEX_POINT('',#197790); +#197790 = CARTESIAN_POINT('',(95.497982,-81.268129,1.585)); +#197791 = CIRCLE('',#197792,0.305621483548); +#197792 = AXIS2_PLACEMENT_3D('',#197793,#197794,#197795); +#197793 = CARTESIAN_POINT('',(95.6678405,-81.522201,1.585)); +#197794 = DIRECTION('',(0.,0.,1.)); +#197795 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#197796 = ORIENTED_EDGE('',*,*,#197797,.T.); +#197797 = EDGE_CURVE('',#197789,#197798,#197800,.T.); +#197798 = VERTEX_POINT('',#197799); +#197799 = CARTESIAN_POINT('',(95.441192,-81.320306,1.585)); +#197800 = LINE('',#197801,#197802); +#197801 = CARTESIAN_POINT('',(95.497982,-81.268129,1.585)); +#197802 = VECTOR('',#197803,1.); +#197803 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#197804 = ORIENTED_EDGE('',*,*,#197805,.T.); +#197805 = EDGE_CURVE('',#197798,#197806,#197808,.T.); +#197806 = VERTEX_POINT('',#197807); +#197807 = CARTESIAN_POINT('',(95.331286,-81.261349,1.585)); +#197808 = CIRCLE('',#197809,7.50002417247E-02); +#197809 = AXIS2_PLACEMENT_3D('',#197810,#197811,#197812); +#197810 = CARTESIAN_POINT('',(95.405935970023,-81.25410895619,1.585)); +#197811 = DIRECTION('',(-0.,0.,-1.)); +#197812 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#197813 = ORIENTED_EDGE('',*,*,#197814,.T.); +#197814 = EDGE_CURVE('',#197806,#197628,#197815,.T.); +#197815 = LINE('',#197816,#197817); +#197816 = CARTESIAN_POINT('',(95.331286,-81.261349,1.585)); +#197817 = VECTOR('',#197818,1.); +#197818 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#197819 = PLANE('',#197820); +#197820 = AXIS2_PLACEMENT_3D('',#197821,#197822,#197823); +#197821 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197822 = DIRECTION('',(0.,0.,1.)); +#197823 = DIRECTION('',(1.,0.,-0.)); +#197824 = SHELL_BASED_SURFACE_MODEL('',(#197825)); +#197825 = OPEN_SHELL('',(#197826)); +#197826 = ADVANCED_FACE('',(#197827,#197897),#197975,.T.); +#197827 = FACE_BOUND('',#197828,.F.); +#197828 = EDGE_LOOP('',(#197829,#197840,#197848,#197857,#197865,#197874, + #197882,#197891)); +#197829 = ORIENTED_EDGE('',*,*,#197830,.T.); +#197830 = EDGE_CURVE('',#197831,#197833,#197835,.T.); +#197831 = VERTEX_POINT('',#197832); +#197832 = CARTESIAN_POINT('',(164.08165,-80.0231,1.585)); +#197833 = VERTEX_POINT('',#197834); +#197834 = CARTESIAN_POINT('',(164.84165,-79.2631,1.585)); +#197835 = CIRCLE('',#197836,0.760000524771); +#197836 = AXIS2_PLACEMENT_3D('',#197837,#197838,#197839); +#197837 = CARTESIAN_POINT('',(164.84165052477,-80.02310052477,1.585)); +#197838 = DIRECTION('',(0.,0.,-1.)); +#197839 = DIRECTION('',(-1.,6.90487863415E-07,0.)); +#197840 = ORIENTED_EDGE('',*,*,#197841,.T.); +#197841 = EDGE_CURVE('',#197833,#197842,#197844,.T.); +#197842 = VERTEX_POINT('',#197843); +#197843 = CARTESIAN_POINT('',(166.24165,-79.2631,1.585)); +#197844 = LINE('',#197845,#197846); +#197845 = CARTESIAN_POINT('',(164.84165,-79.2631,1.585)); +#197846 = VECTOR('',#197847,1.); +#197847 = DIRECTION('',(1.,0.,0.)); +#197848 = ORIENTED_EDGE('',*,*,#197849,.T.); +#197849 = EDGE_CURVE('',#197842,#197850,#197852,.T.); +#197850 = VERTEX_POINT('',#197851); +#197851 = CARTESIAN_POINT('',(167.00165,-80.0231,1.585)); +#197852 = CIRCLE('',#197853,0.760000524771); +#197853 = AXIS2_PLACEMENT_3D('',#197854,#197855,#197856); +#197854 = CARTESIAN_POINT('',(166.24164947522,-80.02310052477,1.585)); +#197855 = DIRECTION('',(0.,0.,-1.)); +#197856 = DIRECTION('',(6.904878260181E-07,1.,0.)); +#197857 = ORIENTED_EDGE('',*,*,#197858,.T.); +#197858 = EDGE_CURVE('',#197850,#197859,#197861,.T.); +#197859 = VERTEX_POINT('',#197860); +#197860 = CARTESIAN_POINT('',(167.00165,-80.6231,1.585)); +#197861 = LINE('',#197862,#197863); +#197862 = CARTESIAN_POINT('',(167.00165,-80.0231,1.585)); +#197863 = VECTOR('',#197864,1.); +#197864 = DIRECTION('',(0.,-1.,0.)); +#197865 = ORIENTED_EDGE('',*,*,#197866,.T.); +#197866 = EDGE_CURVE('',#197859,#197867,#197869,.T.); +#197867 = VERTEX_POINT('',#197868); +#197868 = CARTESIAN_POINT('',(166.24165,-81.3831,1.585)); +#197869 = CIRCLE('',#197870,0.760000524771); +#197870 = AXIS2_PLACEMENT_3D('',#197871,#197872,#197873); +#197871 = CARTESIAN_POINT('',(166.24164947522,-80.62309947522,1.585)); +#197872 = DIRECTION('',(0.,0.,-1.)); +#197873 = DIRECTION('',(1.,-6.904878447166E-07,0.)); +#197874 = ORIENTED_EDGE('',*,*,#197875,.T.); +#197875 = EDGE_CURVE('',#197867,#197876,#197878,.T.); +#197876 = VERTEX_POINT('',#197877); +#197877 = CARTESIAN_POINT('',(164.84165,-81.3831,1.585)); +#197878 = LINE('',#197879,#197880); +#197879 = CARTESIAN_POINT('',(166.24165,-81.3831,1.585)); +#197880 = VECTOR('',#197881,1.); +#197881 = DIRECTION('',(-1.,0.,0.)); +#197882 = ORIENTED_EDGE('',*,*,#197883,.T.); +#197883 = EDGE_CURVE('',#197876,#197884,#197886,.T.); +#197884 = VERTEX_POINT('',#197885); +#197885 = CARTESIAN_POINT('',(164.08165,-80.6231,1.585)); +#197886 = CIRCLE('',#197887,0.760000524771); +#197887 = AXIS2_PLACEMENT_3D('',#197888,#197889,#197890); +#197888 = CARTESIAN_POINT('',(164.84165052477,-80.62309947522,1.585)); +#197889 = DIRECTION('',(0.,0.,-1.)); +#197890 = DIRECTION('',(-6.90487863415E-07,-1.,-0.)); +#197891 = ORIENTED_EDGE('',*,*,#197892,.T.); +#197892 = EDGE_CURVE('',#197884,#197831,#197893,.T.); +#197893 = LINE('',#197894,#197895); +#197894 = CARTESIAN_POINT('',(164.08165,-80.6231,1.585)); +#197895 = VECTOR('',#197896,1.); +#197896 = DIRECTION('',(0.,1.,0.)); +#197897 = FACE_BOUND('',#197898,.F.); +#197898 = EDGE_LOOP('',(#197899,#197910,#197918,#197926,#197935,#197943, + #197952,#197960,#197969)); +#197899 = ORIENTED_EDGE('',*,*,#197900,.T.); +#197900 = EDGE_CURVE('',#197901,#197903,#197905,.T.); +#197901 = VERTEX_POINT('',#197902); +#197902 = CARTESIAN_POINT('',(166.88165,-79.950989,1.585)); +#197903 = VERTEX_POINT('',#197904); +#197904 = CARTESIAN_POINT('',(166.313761,-79.3831,1.585)); +#197905 = CIRCLE('',#197906,0.64404917508); +#197906 = AXIS2_PLACEMENT_3D('',#197907,#197908,#197909); +#197907 = CARTESIAN_POINT('',(166.24165046088,-80.02309953911,1.585)); +#197908 = DIRECTION('',(0.,0.,1.)); +#197909 = DIRECTION('',(0.993712225526,0.111964337363,-0.)); +#197910 = ORIENTED_EDGE('',*,*,#197911,.T.); +#197911 = EDGE_CURVE('',#197903,#197912,#197914,.T.); +#197912 = VERTEX_POINT('',#197913); +#197913 = CARTESIAN_POINT('',(164.84165,-79.3831,1.585)); +#197914 = LINE('',#197915,#197916); +#197915 = CARTESIAN_POINT('',(166.313761,-79.3831,1.585)); +#197916 = VECTOR('',#197917,1.); +#197917 = DIRECTION('',(-1.,0.,0.)); +#197918 = ORIENTED_EDGE('',*,*,#197919,.T.); +#197919 = EDGE_CURVE('',#197912,#197920,#197922,.T.); +#197920 = VERTEX_POINT('',#197921); +#197921 = CARTESIAN_POINT('',(164.769539,-79.3831,1.585)); +#197922 = LINE('',#197923,#197924); +#197923 = CARTESIAN_POINT('',(164.84165,-79.3831,1.585)); +#197924 = VECTOR('',#197925,1.); +#197925 = DIRECTION('',(-1.,0.,0.)); +#197926 = ORIENTED_EDGE('',*,*,#197927,.T.); +#197927 = EDGE_CURVE('',#197920,#197928,#197930,.T.); +#197928 = VERTEX_POINT('',#197929); +#197929 = CARTESIAN_POINT('',(164.20165,-79.950989,1.585)); +#197930 = CIRCLE('',#197931,0.64404917508); +#197931 = AXIS2_PLACEMENT_3D('',#197932,#197933,#197934); +#197932 = CARTESIAN_POINT('',(164.84164953911,-80.02309953911,1.585)); +#197933 = DIRECTION('',(0.,0.,1.)); +#197934 = DIRECTION('',(-0.111964337362,0.993712225526,0.)); +#197935 = ORIENTED_EDGE('',*,*,#197936,.T.); +#197936 = EDGE_CURVE('',#197928,#197937,#197939,.T.); +#197937 = VERTEX_POINT('',#197938); +#197938 = CARTESIAN_POINT('',(164.20165,-80.695211,1.585)); +#197939 = LINE('',#197940,#197941); +#197940 = CARTESIAN_POINT('',(164.20165,-79.950989,1.585)); +#197941 = VECTOR('',#197942,1.); +#197942 = DIRECTION('',(0.,-1.,0.)); +#197943 = ORIENTED_EDGE('',*,*,#197944,.T.); +#197944 = EDGE_CURVE('',#197937,#197945,#197947,.T.); +#197945 = VERTEX_POINT('',#197946); +#197946 = CARTESIAN_POINT('',(164.769539,-81.2631,1.585)); +#197947 = CIRCLE('',#197948,0.64404917508); +#197948 = AXIS2_PLACEMENT_3D('',#197949,#197950,#197951); +#197949 = CARTESIAN_POINT('',(164.84164953911,-80.62310046088,1.585)); +#197950 = DIRECTION('',(0.,0.,1.)); +#197951 = DIRECTION('',(-0.993712225526,-0.111964337362,0.)); +#197952 = ORIENTED_EDGE('',*,*,#197953,.T.); +#197953 = EDGE_CURVE('',#197945,#197954,#197956,.T.); +#197954 = VERTEX_POINT('',#197955); +#197955 = CARTESIAN_POINT('',(166.313761,-81.2631,1.585)); +#197956 = LINE('',#197957,#197958); +#197957 = CARTESIAN_POINT('',(164.769539,-81.2631,1.585)); +#197958 = VECTOR('',#197959,1.); +#197959 = DIRECTION('',(1.,0.,0.)); +#197960 = ORIENTED_EDGE('',*,*,#197961,.T.); +#197961 = EDGE_CURVE('',#197954,#197962,#197964,.T.); +#197962 = VERTEX_POINT('',#197963); +#197963 = CARTESIAN_POINT('',(166.88165,-80.695211,1.585)); +#197964 = CIRCLE('',#197965,0.64404917508); +#197965 = AXIS2_PLACEMENT_3D('',#197966,#197967,#197968); +#197966 = CARTESIAN_POINT('',(166.24165046088,-80.62310046088,1.585)); +#197967 = DIRECTION('',(0.,0.,1.)); +#197968 = DIRECTION('',(0.111964337363,-0.993712225526,0.)); +#197969 = ORIENTED_EDGE('',*,*,#197970,.T.); +#197970 = EDGE_CURVE('',#197962,#197901,#197971,.T.); +#197971 = LINE('',#197972,#197973); +#197972 = CARTESIAN_POINT('',(166.88165,-80.695211,1.585)); +#197973 = VECTOR('',#197974,1.); +#197974 = DIRECTION('',(0.,1.,0.)); +#197975 = PLANE('',#197976); +#197976 = AXIS2_PLACEMENT_3D('',#197977,#197978,#197979); +#197977 = CARTESIAN_POINT('',(0.,0.,1.585)); +#197978 = DIRECTION('',(0.,0.,1.)); +#197979 = DIRECTION('',(1.,0.,-0.)); +#197980 = SHELL_BASED_SURFACE_MODEL('',(#197981)); +#197981 = OPEN_SHELL('',(#197982)); +#197982 = ADVANCED_FACE('',(#197983,#198084),#198167,.T.); +#197983 = FACE_BOUND('',#197984,.F.); +#197984 = EDGE_LOOP('',(#197985,#197996,#198004,#198012,#198020,#198029, + #198037,#198045,#198053,#198061,#198069,#198078)); +#197985 = ORIENTED_EDGE('',*,*,#197986,.T.); +#197986 = EDGE_CURVE('',#197987,#197989,#197991,.T.); +#197987 = VERTEX_POINT('',#197988); +#197988 = CARTESIAN_POINT('',(172.020714,-80.409597,1.585)); +#197989 = VERTEX_POINT('',#197990); +#197990 = CARTESIAN_POINT('',(172.085714,-80.344597,1.585)); +#197991 = CIRCLE('',#197992,6.500103935393E-02); +#197992 = AXIS2_PLACEMENT_3D('',#197993,#197994,#197995); +#197993 = CARTESIAN_POINT('',(172.08571503934,-80.40959803934,1.585)); +#197994 = DIRECTION('',(0.,0.,-1.)); +#197995 = DIRECTION('',(-0.999999999872,1.598967671081E-05,0.)); +#197996 = ORIENTED_EDGE('',*,*,#197997,.T.); +#197997 = EDGE_CURVE('',#197989,#197998,#198000,.T.); +#197998 = VERTEX_POINT('',#197999); +#197999 = CARTESIAN_POINT('',(172.310222,-80.34663,1.585)); +#198000 = LINE('',#198001,#198002); +#198001 = CARTESIAN_POINT('',(172.085714,-80.344597,1.585)); +#198002 = VECTOR('',#198003,1.); +#198003 = DIRECTION('',(0.99995900278,-9.054985357593E-03,0.)); +#198004 = ORIENTED_EDGE('',*,*,#198005,.T.); +#198005 = EDGE_CURVE('',#197998,#198006,#198008,.T.); +#198006 = VERTEX_POINT('',#198007); +#198007 = CARTESIAN_POINT('',(172.46211,-80.398191,1.585)); +#198008 = LINE('',#198009,#198010); +#198009 = CARTESIAN_POINT('',(172.310222,-80.34663,1.585)); +#198010 = VECTOR('',#198011,1.); +#198011 = DIRECTION('',(0.946926388211,-0.32145048656,0.)); +#198012 = ORIENTED_EDGE('',*,*,#198013,.T.); +#198013 = EDGE_CURVE('',#198006,#198014,#198016,.T.); +#198014 = VERTEX_POINT('',#198015); +#198015 = CARTESIAN_POINT('',(172.566037,-80.50087,1.585)); +#198016 = LINE('',#198017,#198018); +#198017 = CARTESIAN_POINT('',(172.46211,-80.398191,1.585)); +#198018 = VECTOR('',#198019,1.); +#198019 = DIRECTION('',(0.711365069748,-0.70282269282,0.)); +#198020 = ORIENTED_EDGE('',*,*,#198021,.T.); +#198021 = EDGE_CURVE('',#198014,#198022,#198024,.T.); +#198022 = VERTEX_POINT('',#198023); +#198023 = CARTESIAN_POINT('',(172.663059,-80.939647,1.585)); +#198024 = CIRCLE('',#198025,0.67543082859); +#198025 = AXIS2_PLACEMENT_3D('',#198026,#198027,#198028); +#198026 = CARTESIAN_POINT('',(171.99260778858,-80.85778139475,1.585)); +#198027 = DIRECTION('',(0.,0.,-1.)); +#198028 = DIRECTION('',(0.848982881951,0.528420349868,0.)); +#198029 = ORIENTED_EDGE('',*,*,#198030,.T.); +#198030 = EDGE_CURVE('',#198022,#198031,#198033,.T.); +#198031 = VERTEX_POINT('',#198032); +#198032 = CARTESIAN_POINT('',(172.615281,-81.12438,1.585)); +#198033 = LINE('',#198034,#198035); +#198034 = CARTESIAN_POINT('',(172.663059,-80.939647,1.585)); +#198035 = VECTOR('',#198036,1.); +#198036 = DIRECTION('',(-0.250393747413,-0.968144086,0.)); +#198037 = ORIENTED_EDGE('',*,*,#198038,.T.); +#198038 = EDGE_CURVE('',#198031,#198039,#198041,.T.); +#198039 = VERTEX_POINT('',#198040); +#198040 = CARTESIAN_POINT('',(172.560248,-81.226987,1.585)); +#198041 = LINE('',#198042,#198043); +#198042 = CARTESIAN_POINT('',(172.615281,-81.12438,1.585)); +#198043 = VECTOR('',#198044,1.); +#198044 = DIRECTION('',(-0.472654886773,-0.88124761447,0.)); +#198045 = ORIENTED_EDGE('',*,*,#198046,.T.); +#198046 = EDGE_CURVE('',#198039,#198047,#198049,.T.); +#198047 = VERTEX_POINT('',#198048); +#198048 = CARTESIAN_POINT('',(172.462114,-81.320999,1.585)); +#198049 = LINE('',#198050,#198051); +#198050 = CARTESIAN_POINT('',(172.560248,-81.226987,1.585)); +#198051 = VECTOR('',#198052,1.); +#198052 = DIRECTION('',(-0.722109804107,-0.691778455008,0.)); +#198053 = ORIENTED_EDGE('',*,*,#198054,.T.); +#198054 = EDGE_CURVE('',#198047,#198055,#198057,.T.); +#198055 = VERTEX_POINT('',#198056); +#198056 = CARTESIAN_POINT('',(172.310222,-81.372563,1.585)); +#198057 = LINE('',#198058,#198059); +#198058 = CARTESIAN_POINT('',(172.462114,-81.320999,1.585)); +#198059 = VECTOR('',#198060,1.); +#198060 = DIRECTION('',(-0.946923272019,-0.321459666068,0.)); +#198061 = ORIENTED_EDGE('',*,*,#198062,.T.); +#198062 = EDGE_CURVE('',#198055,#198063,#198065,.T.); +#198063 = VERTEX_POINT('',#198064); +#198064 = CARTESIAN_POINT('',(172.085714,-81.374597,1.585)); +#198065 = LINE('',#198066,#198067); +#198066 = CARTESIAN_POINT('',(172.310222,-81.372563,1.585)); +#198067 = VECTOR('',#198068,1.); +#198068 = DIRECTION('',(-0.999958962441,-9.059438993705E-03,0.)); +#198069 = ORIENTED_EDGE('',*,*,#198070,.T.); +#198070 = EDGE_CURVE('',#198063,#198071,#198073,.T.); +#198071 = VERTEX_POINT('',#198072); +#198072 = CARTESIAN_POINT('',(172.020714,-81.309597,1.585)); +#198073 = CIRCLE('',#198074,6.500103935393E-02); +#198074 = AXIS2_PLACEMENT_3D('',#198075,#198076,#198077); +#198075 = CARTESIAN_POINT('',(172.08571503934,-81.30959596065,1.585)); +#198076 = DIRECTION('',(0.,0.,-1.)); +#198077 = DIRECTION('',(-1.598967692944E-05,-0.999999999872,-0.)); +#198078 = ORIENTED_EDGE('',*,*,#198079,.T.); +#198079 = EDGE_CURVE('',#198071,#197987,#198080,.T.); +#198080 = LINE('',#198081,#198082); +#198081 = CARTESIAN_POINT('',(172.020714,-81.309597,1.585)); +#198082 = VECTOR('',#198083,1.); +#198083 = DIRECTION('',(0.,1.,0.)); +#198084 = FACE_BOUND('',#198085,.F.); +#198085 = EDGE_LOOP('',(#198086,#198096,#198104,#198112,#198120,#198128, + #198136,#198145,#198153,#198161)); +#198086 = ORIENTED_EDGE('',*,*,#198087,.T.); +#198087 = EDGE_CURVE('',#198088,#198090,#198092,.T.); +#198088 = VERTEX_POINT('',#198089); +#198089 = CARTESIAN_POINT('',(172.393458,-80.509265,1.585)); +#198090 = VERTEX_POINT('',#198091); +#198091 = CARTESIAN_POINT('',(172.289453,-80.474597,1.585)); +#198092 = LINE('',#198093,#198094); +#198093 = CARTESIAN_POINT('',(172.393458,-80.509265,1.585)); +#198094 = VECTOR('',#198095,1.); +#198095 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#198096 = ORIENTED_EDGE('',*,*,#198097,.T.); +#198097 = EDGE_CURVE('',#198090,#198098,#198100,.T.); +#198098 = VERTEX_POINT('',#198099); +#198099 = CARTESIAN_POINT('',(172.150714,-80.474597,1.585)); +#198100 = LINE('',#198101,#198102); +#198101 = CARTESIAN_POINT('',(172.289453,-80.474597,1.585)); +#198102 = VECTOR('',#198103,1.); +#198103 = DIRECTION('',(-1.,0.,0.)); +#198104 = ORIENTED_EDGE('',*,*,#198105,.T.); +#198105 = EDGE_CURVE('',#198098,#198106,#198108,.T.); +#198106 = VERTEX_POINT('',#198107); +#198107 = CARTESIAN_POINT('',(172.150714,-81.244597,1.585)); +#198108 = LINE('',#198109,#198110); +#198109 = CARTESIAN_POINT('',(172.150714,-80.474597,1.585)); +#198110 = VECTOR('',#198111,1.); +#198111 = DIRECTION('',(0.,-1.,0.)); +#198112 = ORIENTED_EDGE('',*,*,#198113,.T.); +#198113 = EDGE_CURVE('',#198106,#198114,#198116,.T.); +#198114 = VERTEX_POINT('',#198115); +#198115 = CARTESIAN_POINT('',(172.289453,-81.244597,1.585)); +#198116 = LINE('',#198117,#198118); +#198117 = CARTESIAN_POINT('',(172.150714,-81.244597,1.585)); +#198118 = VECTOR('',#198119,1.); +#198119 = DIRECTION('',(1.,0.,0.)); +#198120 = ORIENTED_EDGE('',*,*,#198121,.T.); +#198121 = EDGE_CURVE('',#198114,#198122,#198124,.T.); +#198122 = VERTEX_POINT('',#198123); +#198123 = CARTESIAN_POINT('',(172.393458,-81.209928,1.585)); +#198124 = LINE('',#198125,#198126); +#198125 = CARTESIAN_POINT('',(172.289453,-81.244597,1.585)); +#198126 = VECTOR('',#198127,1.); +#198127 = DIRECTION('',(0.948681473735,0.316233238911,0.)); +#198128 = ORIENTED_EDGE('',*,*,#198129,.T.); +#198129 = EDGE_CURVE('',#198122,#198130,#198132,.T.); +#198130 = VERTEX_POINT('',#198131); +#198131 = CARTESIAN_POINT('',(172.460865,-81.142522,1.585)); +#198132 = LINE('',#198133,#198134); +#198133 = CARTESIAN_POINT('',(172.393458,-81.209928,1.585)); +#198134 = VECTOR('',#198135,1.); +#198135 = DIRECTION('',(0.707112026261,0.707101536074,0.)); +#198136 = ORIENTED_EDGE('',*,*,#198137,.T.); +#198137 = EDGE_CURVE('',#198130,#198138,#198140,.T.); +#198138 = VERTEX_POINT('',#198139); +#198139 = CARTESIAN_POINT('',(172.535,-80.803311,1.585)); +#198140 = CIRCLE('',#198141,0.553325470753); +#198141 = AXIS2_PLACEMENT_3D('',#198142,#198143,#198144); +#198142 = CARTESIAN_POINT('',(171.98466292366,-80.86074077444,1.585)); +#198143 = DIRECTION('',(0.,0.,1.)); +#198144 = DIRECTION('',(0.860618390997,-0.509250414901,0.)); +#198145 = ORIENTED_EDGE('',*,*,#198146,.T.); +#198146 = EDGE_CURVE('',#198138,#198147,#198149,.T.); +#198147 = VERTEX_POINT('',#198148); +#198148 = CARTESIAN_POINT('',(172.495814,-80.64657,1.585)); +#198149 = LINE('',#198150,#198151); +#198150 = CARTESIAN_POINT('',(172.535,-80.803311,1.585)); +#198151 = VECTOR('',#198152,1.); +#198152 = DIRECTION('',(-0.242539994061,0.970141407879,0.)); +#198153 = ORIENTED_EDGE('',*,*,#198154,.T.); +#198154 = EDGE_CURVE('',#198147,#198155,#198157,.T.); +#198155 = VERTEX_POINT('',#198156); +#198156 = CARTESIAN_POINT('',(172.460864,-80.576669,1.585)); +#198157 = LINE('',#198158,#198159); +#198158 = CARTESIAN_POINT('',(172.495814,-80.64657,1.585)); +#198159 = VECTOR('',#198160,1.); +#198160 = DIRECTION('',(-0.447208477227,0.894429750118,0.)); +#198161 = ORIENTED_EDGE('',*,*,#198162,.T.); +#198162 = EDGE_CURVE('',#198155,#198088,#198163,.T.); +#198163 = LINE('',#198164,#198165); +#198164 = CARTESIAN_POINT('',(172.460864,-80.576669,1.585)); +#198165 = VECTOR('',#198166,1.); +#198166 = DIRECTION('',(-0.707117271529,0.707096290689,0.)); +#198167 = PLANE('',#198168); +#198168 = AXIS2_PLACEMENT_3D('',#198169,#198170,#198171); +#198169 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198170 = DIRECTION('',(0.,0.,1.)); +#198171 = DIRECTION('',(1.,0.,-0.)); +#198172 = SHELL_BASED_SURFACE_MODEL('',(#198173)); +#198173 = OPEN_SHELL('',(#198174)); +#198174 = ADVANCED_FACE('',(#198175),#198293,.T.); +#198175 = FACE_BOUND('',#198176,.F.); +#198176 = EDGE_LOOP('',(#198177,#198188,#198196,#198204,#198212,#198220, + #198228,#198236,#198245,#198253,#198262,#198270,#198278,#198287)); +#198177 = ORIENTED_EDGE('',*,*,#198178,.T.); +#198178 = EDGE_CURVE('',#198179,#198181,#198183,.T.); +#198179 = VERTEX_POINT('',#198180); +#198180 = CARTESIAN_POINT('',(171.077857,-80.409597,1.585)); +#198181 = VERTEX_POINT('',#198182); +#198182 = CARTESIAN_POINT('',(171.13466,-80.345116,1.585)); +#198183 = CIRCLE('',#198184,6.499996854978E-02); +#198184 = AXIS2_PLACEMENT_3D('',#198185,#198186,#198187); +#198185 = CARTESIAN_POINT('',(171.14285696855,-80.40959704851,1.585)); +#198186 = DIRECTION('',(0.,0.,-1.)); +#198187 = DIRECTION('',(-1.,7.464412463358E-07,0.)); +#198188 = ORIENTED_EDGE('',*,*,#198189,.T.); +#198189 = EDGE_CURVE('',#198181,#198190,#198192,.T.); +#198190 = VERTEX_POINT('',#198191); +#198191 = CARTESIAN_POINT('',(171.150899,-80.349545,1.585)); +#198192 = LINE('',#198193,#198194); +#198193 = CARTESIAN_POINT('',(171.13466,-80.345116,1.585)); +#198194 = VECTOR('',#198195,1.); +#198195 = DIRECTION('',(0.964761079179,-0.263127459799,0.)); +#198196 = ORIENTED_EDGE('',*,*,#198197,.T.); +#198197 = EDGE_CURVE('',#198190,#198198,#198200,.T.); +#198198 = VERTEX_POINT('',#198199); +#198199 = CARTESIAN_POINT('',(171.167731,-80.349545,1.585)); +#198200 = LINE('',#198201,#198202); +#198201 = CARTESIAN_POINT('',(171.150899,-80.349545,1.585)); +#198202 = VECTOR('',#198203,1.); +#198203 = DIRECTION('',(1.,0.,0.)); +#198204 = ORIENTED_EDGE('',*,*,#198205,.T.); +#198205 = EDGE_CURVE('',#198198,#198206,#198208,.T.); +#198206 = VERTEX_POINT('',#198207); +#198207 = CARTESIAN_POINT('',(171.182656,-80.358206,1.585)); +#198208 = LINE('',#198209,#198210); +#198209 = CARTESIAN_POINT('',(171.167731,-80.349545,1.585)); +#198210 = VECTOR('',#198211,1.); +#198211 = DIRECTION('',(0.864917988571,-0.501913212663,0.)); +#198212 = ORIENTED_EDGE('',*,*,#198213,.T.); +#198213 = EDGE_CURVE('',#198206,#198214,#198216,.T.); +#198214 = VERTEX_POINT('',#198215); +#198215 = CARTESIAN_POINT('',(171.199293,-80.377348,1.585)); +#198216 = LINE('',#198217,#198218); +#198217 = CARTESIAN_POINT('',(171.182656,-80.358206,1.585)); +#198218 = VECTOR('',#198219,1.); +#198219 = DIRECTION('',(0.655994194235,-0.754765935327,0.)); +#198220 = ORIENTED_EDGE('',*,*,#198221,.T.); +#198221 = EDGE_CURVE('',#198214,#198222,#198224,.T.); +#198222 = VERTEX_POINT('',#198223); +#198223 = CARTESIAN_POINT('',(171.592143,-81.064835,1.585)); +#198224 = LINE('',#198225,#198226); +#198225 = CARTESIAN_POINT('',(171.199293,-80.377348,1.585)); +#198226 = VECTOR('',#198227,1.); +#198227 = DIRECTION('',(0.496139210371,-0.868242986688,0.)); +#198228 = ORIENTED_EDGE('',*,*,#198229,.T.); +#198229 = EDGE_CURVE('',#198222,#198230,#198232,.T.); +#198230 = VERTEX_POINT('',#198231); +#198231 = CARTESIAN_POINT('',(171.592143,-80.409597,1.585)); +#198232 = LINE('',#198233,#198234); +#198233 = CARTESIAN_POINT('',(171.592143,-81.064835,1.585)); +#198234 = VECTOR('',#198235,1.); +#198235 = DIRECTION('',(0.,1.,0.)); +#198236 = ORIENTED_EDGE('',*,*,#198237,.T.); +#198237 = EDGE_CURVE('',#198230,#198238,#198240,.T.); +#198238 = VERTEX_POINT('',#198239); +#198239 = CARTESIAN_POINT('',(171.722143,-80.409597,1.585)); +#198240 = CIRCLE('',#198241,6.500000000092E-02); +#198241 = AXIS2_PLACEMENT_3D('',#198242,#198243,#198244); +#198242 = CARTESIAN_POINT('',(171.657143,-80.40959734486,1.585)); +#198243 = DIRECTION('',(0.,0.,-1.)); +#198244 = DIRECTION('',(-0.999999999986,5.305658244295E-06,0.)); +#198245 = ORIENTED_EDGE('',*,*,#198246,.T.); +#198246 = EDGE_CURVE('',#198238,#198247,#198249,.T.); +#198247 = VERTEX_POINT('',#198248); +#198248 = CARTESIAN_POINT('',(171.722143,-81.309597,1.585)); +#198249 = LINE('',#198250,#198251); +#198250 = CARTESIAN_POINT('',(171.722143,-80.409597,1.585)); +#198251 = VECTOR('',#198252,1.); +#198252 = DIRECTION('',(0.,-1.,0.)); +#198253 = ORIENTED_EDGE('',*,*,#198254,.T.); +#198254 = EDGE_CURVE('',#198247,#198255,#198257,.T.); +#198255 = VERTEX_POINT('',#198256); +#198256 = CARTESIAN_POINT('',(171.600707,-81.341846,1.585)); +#198257 = CIRCLE('',#198258,6.50002119414E-02); +#198258 = AXIS2_PLACEMENT_3D('',#198259,#198260,#198261); +#198259 = CARTESIAN_POINT('',(171.65714278806,-81.30959651351,1.585)); +#198260 = DIRECTION('',(-0.,0.,-1.)); +#198261 = DIRECTION('',(0.999999999972,-7.484332115465E-06,-0.)); +#198262 = ORIENTED_EDGE('',*,*,#198263,.T.); +#198263 = EDGE_CURVE('',#198255,#198264,#198266,.T.); +#198264 = VERTEX_POINT('',#198265); +#198265 = CARTESIAN_POINT('',(171.207857,-80.654358,1.585)); +#198266 = LINE('',#198267,#198268); +#198267 = CARTESIAN_POINT('',(171.600707,-81.341846,1.585)); +#198268 = VECTOR('',#198269,1.); +#198269 = DIRECTION('',(-0.496138666343,0.868243297561,0.)); +#198270 = ORIENTED_EDGE('',*,*,#198271,.T.); +#198271 = EDGE_CURVE('',#198264,#198272,#198274,.T.); +#198272 = VERTEX_POINT('',#198273); +#198273 = CARTESIAN_POINT('',(171.207857,-81.309597,1.585)); +#198274 = LINE('',#198275,#198276); +#198275 = CARTESIAN_POINT('',(171.207857,-80.654358,1.585)); +#198276 = VECTOR('',#198277,1.); +#198277 = DIRECTION('',(0.,-1.,0.)); +#198278 = ORIENTED_EDGE('',*,*,#198279,.T.); +#198279 = EDGE_CURVE('',#198272,#198280,#198282,.T.); +#198280 = VERTEX_POINT('',#198281); +#198281 = CARTESIAN_POINT('',(171.077857,-81.309597,1.585)); +#198282 = CIRCLE('',#198283,6.500000000092E-02); +#198283 = AXIS2_PLACEMENT_3D('',#198284,#198285,#198286); +#198284 = CARTESIAN_POINT('',(171.142857,-81.30959665513,1.585)); +#198285 = DIRECTION('',(-0.,0.,-1.)); +#198286 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#198287 = ORIENTED_EDGE('',*,*,#198288,.T.); +#198288 = EDGE_CURVE('',#198280,#198179,#198289,.T.); +#198289 = LINE('',#198290,#198291); +#198290 = CARTESIAN_POINT('',(171.077857,-81.309597,1.585)); +#198291 = VECTOR('',#198292,1.); +#198292 = DIRECTION('',(0.,1.,0.)); +#198293 = PLANE('',#198294); +#198294 = AXIS2_PLACEMENT_3D('',#198295,#198296,#198297); +#198295 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198296 = DIRECTION('',(0.,0.,1.)); +#198297 = DIRECTION('',(1.,0.,-0.)); +#198298 = SHELL_BASED_SURFACE_MODEL('',(#198299)); +#198299 = OPEN_SHELL('',(#198300)); +#198300 = ADVANCED_FACE('',(#198301),#198551,.T.); +#198301 = FACE_BOUND('',#198302,.F.); +#198302 = EDGE_LOOP('',(#198303,#198313,#198321,#198330,#198338,#198347, + #198355,#198363,#198371,#198379,#198388,#198396,#198404,#198412, + #198421,#198429,#198437,#198445,#198454,#198462,#198471,#198479, + #198487,#198495,#198503,#198512,#198520,#198529,#198537,#198545)); +#198303 = ORIENTED_EDGE('',*,*,#198304,.T.); +#198304 = EDGE_CURVE('',#198305,#198307,#198309,.T.); +#198305 = VERTEX_POINT('',#198306); +#198306 = CARTESIAN_POINT('',(170.337892,-80.39819,1.585)); +#198307 = VERTEX_POINT('',#198308); +#198308 = CARTESIAN_POINT('',(170.489777,-80.34663,1.585)); +#198309 = LINE('',#198310,#198311); +#198310 = CARTESIAN_POINT('',(170.337892,-80.39819,1.585)); +#198311 = VECTOR('',#198312,1.); +#198312 = DIRECTION('',(0.94692635329,0.32145058943,0.)); +#198313 = ORIENTED_EDGE('',*,*,#198314,.T.); +#198314 = EDGE_CURVE('',#198307,#198315,#198317,.T.); +#198315 = VERTEX_POINT('',#198316); +#198316 = CARTESIAN_POINT('',(170.631765,-80.345232,1.585)); +#198317 = LINE('',#198318,#198319); +#198318 = CARTESIAN_POINT('',(170.489777,-80.34663,1.585)); +#198319 = VECTOR('',#198320,1.); +#198320 = DIRECTION('',(0.999951532626,9.845425265658E-03,0.)); +#198321 = ORIENTED_EDGE('',*,*,#198322,.T.); +#198322 = EDGE_CURVE('',#198315,#198323,#198325,.T.); +#198323 = VERTEX_POINT('',#198324); +#198324 = CARTESIAN_POINT('',(170.76339,-80.409866,1.585)); +#198325 = CIRCLE('',#198326,0.276414597199); +#198326 = AXIS2_PLACEMENT_3D('',#198327,#198328,#198329); +#198327 = CARTESIAN_POINT('',(170.58010572554,-80.61677637741,1.585)); +#198328 = DIRECTION('',(0.,0.,-1.)); +#198329 = DIRECTION('',(0.186890544039,0.982380743169,0.)); +#198330 = ORIENTED_EDGE('',*,*,#198331,.T.); +#198331 = EDGE_CURVE('',#198323,#198332,#198334,.T.); +#198332 = VERTEX_POINT('',#198333); +#198333 = CARTESIAN_POINT('',(170.779122,-80.457062,1.585)); +#198334 = LINE('',#198335,#198336); +#198335 = CARTESIAN_POINT('',(170.76339,-80.409866,1.585)); +#198336 = VECTOR('',#198337,1.); +#198337 = DIRECTION('',(0.316227766017,-0.94868329805,0.)); +#198338 = ORIENTED_EDGE('',*,*,#198339,.T.); +#198339 = EDGE_CURVE('',#198332,#198340,#198342,.T.); +#198340 = VERTEX_POINT('',#198341); +#198341 = CARTESIAN_POINT('',(170.685217,-80.510592,1.585)); +#198342 = CIRCLE('',#198343,6.500026004257E-02); +#198343 = AXIS2_PLACEMENT_3D('',#198344,#198345,#198346); +#198344 = CARTESIAN_POINT('',(170.71428530559,-80.45245365279,1.585)); +#198345 = DIRECTION('',(0.,0.,-1.)); +#198346 = DIRECTION('',(0.997483615677,-7.089736565004E-02,0.)); +#198347 = ORIENTED_EDGE('',*,*,#198348,.T.); +#198348 = EDGE_CURVE('',#198340,#198349,#198351,.T.); +#198349 = VERTEX_POINT('',#198350); +#198350 = CARTESIAN_POINT('',(170.613227,-80.474597,1.585)); +#198351 = LINE('',#198352,#198353); +#198352 = CARTESIAN_POINT('',(170.685217,-80.510592,1.585)); +#198353 = VECTOR('',#198354,1.); +#198354 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#198355 = ORIENTED_EDGE('',*,*,#198356,.T.); +#198356 = EDGE_CURVE('',#198349,#198357,#198359,.T.); +#198357 = VERTEX_POINT('',#198358); +#198358 = CARTESIAN_POINT('',(170.510547,-80.474597,1.585)); +#198359 = LINE('',#198360,#198361); +#198360 = CARTESIAN_POINT('',(170.613227,-80.474597,1.585)); +#198361 = VECTOR('',#198362,1.); +#198362 = DIRECTION('',(-1.,0.,0.)); +#198363 = ORIENTED_EDGE('',*,*,#198364,.T.); +#198364 = EDGE_CURVE('',#198357,#198365,#198367,.T.); +#198365 = VERTEX_POINT('',#198366); +#198366 = CARTESIAN_POINT('',(170.406541,-80.509265,1.585)); +#198367 = LINE('',#198368,#198369); +#198368 = CARTESIAN_POINT('',(170.510547,-80.474597,1.585)); +#198369 = VECTOR('',#198370,1.); +#198370 = DIRECTION('',(-0.948685122324,-0.316222293144,0.)); +#198371 = ORIENTED_EDGE('',*,*,#198372,.T.); +#198372 = EDGE_CURVE('',#198365,#198373,#198375,.T.); +#198373 = VERTEX_POINT('',#198374); +#198374 = CARTESIAN_POINT('',(170.339134,-80.576671,1.585)); +#198375 = LINE('',#198376,#198377); +#198376 = CARTESIAN_POINT('',(170.406541,-80.509265,1.585)); +#198377 = VECTOR('',#198378,1.); +#198378 = DIRECTION('',(-0.707112026261,-0.707101536074,0.)); +#198379 = ORIENTED_EDGE('',*,*,#198380,.T.); +#198380 = EDGE_CURVE('',#198373,#198381,#198383,.T.); +#198381 = VERTEX_POINT('',#198382); +#198382 = CARTESIAN_POINT('',(170.265,-80.915881,1.585)); +#198383 = CIRCLE('',#198384,0.553307903116); +#198384 = AXIS2_PLACEMENT_3D('',#198385,#198386,#198387); +#198385 = CARTESIAN_POINT('',(170.81531893982,-80.85844668868,1.585)); +#198386 = DIRECTION('',(0.,0.,1.)); +#198387 = DIRECTION('',(-0.860614744786,0.509256576842,0.)); +#198388 = ORIENTED_EDGE('',*,*,#198389,.T.); +#198389 = EDGE_CURVE('',#198381,#198390,#198392,.T.); +#198390 = VERTEX_POINT('',#198391); +#198391 = CARTESIAN_POINT('',(170.304185,-81.072622,1.585)); +#198392 = LINE('',#198393,#198394); +#198393 = CARTESIAN_POINT('',(170.265,-80.915881,1.585)); +#198394 = VECTOR('',#198395,1.); +#198395 = DIRECTION('',(0.242534168691,-0.97014286423,0.)); +#198396 = ORIENTED_EDGE('',*,*,#198397,.T.); +#198397 = EDGE_CURVE('',#198390,#198398,#198400,.T.); +#198398 = VERTEX_POINT('',#198399); +#198399 = CARTESIAN_POINT('',(170.339135,-81.142522,1.585)); +#198400 = LINE('',#198401,#198402); +#198401 = CARTESIAN_POINT('',(170.304185,-81.072622,1.585)); +#198402 = VECTOR('',#198403,1.); +#198403 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#198404 = ORIENTED_EDGE('',*,*,#198405,.T.); +#198405 = EDGE_CURVE('',#198398,#198406,#198408,.T.); +#198406 = VERTEX_POINT('',#198407); +#198407 = CARTESIAN_POINT('',(170.406541,-81.209928,1.585)); +#198408 = LINE('',#198409,#198410); +#198409 = CARTESIAN_POINT('',(170.339135,-81.142522,1.585)); +#198410 = VECTOR('',#198411,1.); +#198411 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#198412 = ORIENTED_EDGE('',*,*,#198413,.T.); +#198413 = EDGE_CURVE('',#198406,#198414,#198416,.T.); +#198414 = VERTEX_POINT('',#198415); +#198415 = CARTESIAN_POINT('',(170.679175,-81.209927,1.585)); +#198416 = CIRCLE('',#198417,0.272195913582); +#198417 = AXIS2_PLACEMENT_3D('',#198418,#198419,#198420); +#198418 = CARTESIAN_POINT('',(170.54285713583,-80.97432552445,1.585)); +#198419 = DIRECTION('',(0.,0.,1.)); +#198420 = DIRECTION('',(-0.500801551487,-0.865562132968,0.)); +#198421 = ORIENTED_EDGE('',*,*,#198422,.T.); +#198422 = EDGE_CURVE('',#198414,#198423,#198425,.T.); +#198423 = VERTEX_POINT('',#198424); +#198424 = CARTESIAN_POINT('',(170.692143,-81.196958,1.585)); +#198425 = LINE('',#198426,#198427); +#198426 = CARTESIAN_POINT('',(170.679175,-81.209927,1.585)); +#198427 = VECTOR('',#198428,1.); +#198428 = DIRECTION('',(0.707079518187,0.707134043135,0.)); +#198429 = ORIENTED_EDGE('',*,*,#198430,.T.); +#198430 = EDGE_CURVE('',#198423,#198431,#198433,.T.); +#198431 = VERTEX_POINT('',#198432); +#198432 = CARTESIAN_POINT('',(170.692143,-80.988882,1.585)); +#198433 = LINE('',#198434,#198435); +#198434 = CARTESIAN_POINT('',(170.692143,-81.196958,1.585)); +#198435 = VECTOR('',#198436,1.); +#198436 = DIRECTION('',(0.,1.,0.)); +#198437 = ORIENTED_EDGE('',*,*,#198438,.T.); +#198438 = EDGE_CURVE('',#198431,#198439,#198441,.T.); +#198439 = VERTEX_POINT('',#198440); +#198440 = CARTESIAN_POINT('',(170.585714,-80.988882,1.585)); +#198441 = LINE('',#198442,#198443); +#198442 = CARTESIAN_POINT('',(170.692143,-80.988882,1.585)); +#198443 = VECTOR('',#198444,1.); +#198444 = DIRECTION('',(-1.,0.,0.)); +#198445 = ORIENTED_EDGE('',*,*,#198446,.T.); +#198446 = EDGE_CURVE('',#198439,#198447,#198449,.T.); +#198447 = VERTEX_POINT('',#198448); +#198448 = CARTESIAN_POINT('',(170.585714,-80.858882,1.585)); +#198449 = CIRCLE('',#198450,6.500000000092E-02); +#198450 = AXIS2_PLACEMENT_3D('',#198451,#198452,#198453); +#198451 = CARTESIAN_POINT('',(170.58571434486,-80.923882,1.585)); +#198452 = DIRECTION('',(0.,0.,-1.)); +#198453 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#198454 = ORIENTED_EDGE('',*,*,#198455,.T.); +#198455 = EDGE_CURVE('',#198447,#198456,#198458,.T.); +#198456 = VERTEX_POINT('',#198457); +#198457 = CARTESIAN_POINT('',(170.757143,-80.858882,1.585)); +#198458 = LINE('',#198459,#198460); +#198459 = CARTESIAN_POINT('',(170.585714,-80.858882,1.585)); +#198460 = VECTOR('',#198461,1.); +#198461 = DIRECTION('',(1.,0.,0.)); +#198462 = ORIENTED_EDGE('',*,*,#198463,.T.); +#198463 = EDGE_CURVE('',#198456,#198464,#198466,.T.); +#198464 = VERTEX_POINT('',#198465); +#198465 = CARTESIAN_POINT('',(170.822143,-80.923882,1.585)); +#198466 = CIRCLE('',#198467,6.500103935388E-02); +#198467 = AXIS2_PLACEMENT_3D('',#198468,#198469,#198470); +#198468 = CARTESIAN_POINT('',(170.75714196065,-80.92388303934,1.585)); +#198469 = DIRECTION('',(0.,0.,-1.)); +#198470 = DIRECTION('',(1.598967605495E-05,0.999999999872,0.)); +#198471 = ORIENTED_EDGE('',*,*,#198472,.T.); +#198472 = EDGE_CURVE('',#198464,#198473,#198475,.T.); +#198473 = VERTEX_POINT('',#198474); +#198474 = CARTESIAN_POINT('',(170.822143,-81.223882,1.585)); +#198475 = LINE('',#198476,#198477); +#198476 = CARTESIAN_POINT('',(170.822143,-80.923882,1.585)); +#198477 = VECTOR('',#198478,1.); +#198478 = DIRECTION('',(0.,-1.,0.)); +#198479 = ORIENTED_EDGE('',*,*,#198480,.T.); +#198480 = EDGE_CURVE('',#198473,#198481,#198483,.T.); +#198481 = VERTEX_POINT('',#198482); +#198482 = CARTESIAN_POINT('',(170.817195,-81.248756,1.585)); +#198483 = LINE('',#198484,#198485); +#198484 = CARTESIAN_POINT('',(170.822143,-81.223882,1.585)); +#198485 = VECTOR('',#198486,1.); +#198486 = DIRECTION('',(-0.195099947481,-0.98078336573,0.)); +#198487 = ORIENTED_EDGE('',*,*,#198488,.T.); +#198488 = EDGE_CURVE('',#198481,#198489,#198491,.T.); +#198489 = VERTEX_POINT('',#198490); +#198490 = CARTESIAN_POINT('',(170.803106,-81.269843,1.585)); +#198491 = LINE('',#198492,#198493); +#198492 = CARTESIAN_POINT('',(170.817195,-81.248756,1.585)); +#198493 = VECTOR('',#198494,1.); +#198494 = DIRECTION('',(-0.55554616352,-0.831485694524,0.)); +#198495 = ORIENTED_EDGE('',*,*,#198496,.T.); +#198496 = EDGE_CURVE('',#198489,#198497,#198499,.T.); +#198497 = VERTEX_POINT('',#198498); +#198498 = CARTESIAN_POINT('',(170.747819,-81.321005,1.585)); +#198499 = LINE('',#198500,#198501); +#198500 = CARTESIAN_POINT('',(170.803106,-81.269843,1.585)); +#198501 = VECTOR('',#198502,1.); +#198502 = DIRECTION('',(-0.733956980059,-0.679195959516,0.)); +#198503 = ORIENTED_EDGE('',*,*,#198504,.T.); +#198504 = EDGE_CURVE('',#198497,#198505,#198507,.T.); +#198505 = VERTEX_POINT('',#198506); +#198506 = CARTESIAN_POINT('',(170.337885,-81.320999,1.585)); +#198507 = CIRCLE('',#198508,0.409311833232); +#198508 = AXIS2_PLACEMENT_3D('',#198509,#198510,#198511); +#198509 = CARTESIAN_POINT('',(170.54285718563,-80.96670734057,1.585)); +#198510 = DIRECTION('',(-0.,0.,-1.)); +#198511 = DIRECTION('',(0.50074734646,-0.865593492936,-0.)); +#198512 = ORIENTED_EDGE('',*,*,#198513,.T.); +#198513 = EDGE_CURVE('',#198505,#198514,#198516,.T.); +#198514 = VERTEX_POINT('',#198515); +#198515 = CARTESIAN_POINT('',(170.233962,-81.218322,1.585)); +#198516 = LINE('',#198517,#198518); +#198517 = CARTESIAN_POINT('',(170.337885,-81.320999,1.585)); +#198518 = VECTOR('',#198519,1.); +#198519 = DIRECTION('',(-0.711358389548,0.70282945415,0.)); +#198520 = ORIENTED_EDGE('',*,*,#198521,.T.); +#198521 = EDGE_CURVE('',#198514,#198522,#198524,.T.); +#198522 = VERTEX_POINT('',#198523); +#198523 = CARTESIAN_POINT('',(170.136941,-80.779546,1.585)); +#198524 = CIRCLE('',#198525,0.675436077441); +#198525 = AXIS2_PLACEMENT_3D('',#198526,#198527,#198528); +#198526 = CARTESIAN_POINT('',(170.80739758405,-80.86141091072,1.585)); +#198527 = DIRECTION('',(0.,0.,-1.)); +#198528 = DIRECTION('',(-0.84898571931,-0.528415791218,-0.)); +#198529 = ORIENTED_EDGE('',*,*,#198530,.T.); +#198530 = EDGE_CURVE('',#198522,#198531,#198533,.T.); +#198531 = VERTEX_POINT('',#198532); +#198532 = CARTESIAN_POINT('',(170.184719,-80.594813,1.585)); +#198533 = LINE('',#198534,#198535); +#198534 = CARTESIAN_POINT('',(170.136941,-80.779546,1.585)); +#198535 = VECTOR('',#198536,1.); +#198536 = DIRECTION('',(0.250393747413,0.968144086,0.)); +#198537 = ORIENTED_EDGE('',*,*,#198538,.T.); +#198538 = EDGE_CURVE('',#198531,#198539,#198541,.T.); +#198539 = VERTEX_POINT('',#198540); +#198540 = CARTESIAN_POINT('',(170.239752,-80.492206,1.585)); +#198541 = LINE('',#198542,#198543); +#198542 = CARTESIAN_POINT('',(170.184719,-80.594813,1.585)); +#198543 = VECTOR('',#198544,1.); +#198544 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#198545 = ORIENTED_EDGE('',*,*,#198546,.T.); +#198546 = EDGE_CURVE('',#198539,#198305,#198547,.T.); +#198547 = LINE('',#198548,#198549); +#198548 = CARTESIAN_POINT('',(170.239752,-80.492206,1.585)); +#198549 = VECTOR('',#198550,1.); +#198550 = DIRECTION('',(0.722116228987,0.691771748364,0.)); +#198551 = PLANE('',#198552); +#198552 = AXIS2_PLACEMENT_3D('',#198553,#198554,#198555); +#198553 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198554 = DIRECTION('',(0.,0.,1.)); +#198555 = DIRECTION('',(1.,0.,-0.)); +#198556 = SHELL_BASED_SURFACE_MODEL('',(#198557)); +#198557 = OPEN_SHELL('',(#198558)); +#198558 = ADVANCED_FACE('',(#198559),#198653,.T.); +#198559 = FACE_BOUND('',#198560,.F.); +#198560 = EDGE_LOOP('',(#198561,#198572,#198580,#198588,#198597,#198605, + #198613,#198622,#198630,#198639,#198647)); +#198561 = ORIENTED_EDGE('',*,*,#198562,.T.); +#198562 = EDGE_CURVE('',#198563,#198565,#198567,.T.); +#198563 = VERTEX_POINT('',#198564); +#198564 = CARTESIAN_POINT('',(82.683526,-79.673309,1.585)); +#198565 = VERTEX_POINT('',#198566); +#198566 = CARTESIAN_POINT('',(82.683526,-79.379073,1.585)); +#198567 = CIRCLE('',#198568,0.150000292066); +#198568 = AXIS2_PLACEMENT_3D('',#198569,#198570,#198571); +#198569 = CARTESIAN_POINT('',(82.71279,-79.526191,1.585)); +#198570 = DIRECTION('',(0.,0.,-1.)); +#198571 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#198572 = ORIENTED_EDGE('',*,*,#198573,.T.); +#198573 = EDGE_CURVE('',#198565,#198574,#198576,.T.); +#198574 = VERTEX_POINT('',#198575); +#198575 = CARTESIAN_POINT('',(85.320316,-79.376932,1.585)); +#198576 = LINE('',#198577,#198578); +#198577 = CARTESIAN_POINT('',(82.683526,-79.379073,1.585)); +#198578 = VECTOR('',#198579,1.); +#198579 = DIRECTION('',(0.999999670351,8.1197186512E-04,0.)); +#198580 = ORIENTED_EDGE('',*,*,#198581,.T.); +#198581 = EDGE_CURVE('',#198574,#198582,#198584,.T.); +#198582 = VERTEX_POINT('',#198583); +#198583 = CARTESIAN_POINT('',(85.342054,-79.379073,1.585)); +#198584 = LINE('',#198585,#198586); +#198585 = CARTESIAN_POINT('',(85.320316,-79.376932,1.585)); +#198586 = VECTOR('',#198587,1.); +#198587 = DIRECTION('',(0.99518475403,-9.801686256264E-02,0.)); +#198588 = ORIENTED_EDGE('',*,*,#198589,.T.); +#198589 = EDGE_CURVE('',#198582,#198590,#198592,.T.); +#198590 = VERTEX_POINT('',#198591); +#198591 = CARTESIAN_POINT('',(85.396126,-79.650911,1.585)); +#198592 = CIRCLE('',#198593,0.149999967208); +#198593 = AXIS2_PLACEMENT_3D('',#198594,#198595,#198596); +#198594 = CARTESIAN_POINT('',(85.312790276269,-79.52619072373,1.585)); +#198595 = DIRECTION('',(0.,0.,-1.)); +#198596 = DIRECTION('',(0.195091534189,0.980785039286,0.)); +#198597 = ORIENTED_EDGE('',*,*,#198598,.T.); +#198598 = EDGE_CURVE('',#198590,#198599,#198601,.T.); +#198599 = VERTEX_POINT('',#198600); +#198600 = CARTESIAN_POINT('',(83.277624,-80.861905,1.585)); +#198601 = LINE('',#198602,#198603); +#198602 = CARTESIAN_POINT('',(85.396126,-79.650911,1.585)); +#198603 = VECTOR('',#198604,1.); +#198604 = DIRECTION('',(-0.868168737335,-0.496269124079,0.)); +#198605 = ORIENTED_EDGE('',*,*,#198606,.T.); +#198606 = EDGE_CURVE('',#198599,#198607,#198609,.T.); +#198607 = VERTEX_POINT('',#198608); +#198608 = CARTESIAN_POINT('',(85.342054,-80.864787,1.585)); +#198609 = LINE('',#198610,#198611); +#198610 = CARTESIAN_POINT('',(83.277624,-80.861905,1.585)); +#198611 = VECTOR('',#198612,1.); +#198612 = DIRECTION('',(0.999999025556,-1.396025630157E-03,0.)); +#198613 = ORIENTED_EDGE('',*,*,#198614,.T.); +#198614 = EDGE_CURVE('',#198607,#198615,#198617,.T.); +#198615 = VERTEX_POINT('',#198616); +#198616 = CARTESIAN_POINT('',(85.342054,-81.159023,1.585)); +#198617 = CIRCLE('',#198618,0.150000292066); +#198618 = AXIS2_PLACEMENT_3D('',#198619,#198620,#198621); +#198619 = CARTESIAN_POINT('',(85.31279,-81.011905,1.585)); +#198620 = DIRECTION('',(0.,0.,-1.)); +#198621 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#198622 = ORIENTED_EDGE('',*,*,#198623,.T.); +#198623 = EDGE_CURVE('',#198615,#198624,#198626,.T.); +#198624 = VERTEX_POINT('',#198625); +#198625 = CARTESIAN_POINT('',(82.683526,-81.159023,1.585)); +#198626 = LINE('',#198627,#198628); +#198627 = CARTESIAN_POINT('',(85.342054,-81.159023,1.585)); +#198628 = VECTOR('',#198629,1.); +#198629 = DIRECTION('',(-1.,0.,0.)); +#198630 = ORIENTED_EDGE('',*,*,#198631,.T.); +#198631 = EDGE_CURVE('',#198624,#198632,#198634,.T.); +#198632 = VERTEX_POINT('',#198633); +#198633 = CARTESIAN_POINT('',(82.629454,-80.887185,1.585)); +#198634 = CIRCLE('',#198635,0.149999967208); +#198635 = AXIS2_PLACEMENT_3D('',#198636,#198637,#198638); +#198636 = CARTESIAN_POINT('',(82.712789723731,-81.01190527626,1.585)); +#198637 = DIRECTION('',(0.,0.,-1.)); +#198638 = DIRECTION('',(-0.19509153419,-0.980785039286,-0.)); +#198639 = ORIENTED_EDGE('',*,*,#198640,.T.); +#198640 = EDGE_CURVE('',#198632,#198641,#198643,.T.); +#198641 = VERTEX_POINT('',#198642); +#198642 = CARTESIAN_POINT('',(84.747954,-79.676191,1.585)); +#198643 = LINE('',#198644,#198645); +#198644 = CARTESIAN_POINT('',(82.629454,-80.887185,1.585)); +#198645 = VECTOR('',#198646,1.); +#198646 = DIRECTION('',(0.86816853548,0.496269477203,0.)); +#198647 = ORIENTED_EDGE('',*,*,#198648,.T.); +#198648 = EDGE_CURVE('',#198641,#198563,#198649,.T.); +#198649 = LINE('',#198650,#198651); +#198650 = CARTESIAN_POINT('',(84.747954,-79.676191,1.585)); +#198651 = VECTOR('',#198652,1.); +#198652 = DIRECTION('',(-0.999999025554,1.396026982605E-03,0.)); +#198653 = PLANE('',#198654); +#198654 = AXIS2_PLACEMENT_3D('',#198655,#198656,#198657); +#198655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198656 = DIRECTION('',(0.,0.,1.)); +#198657 = DIRECTION('',(1.,0.,-0.)); +#198658 = SHELL_BASED_SURFACE_MODEL('',(#198659)); +#198659 = OPEN_SHELL('',(#198660)); +#198660 = ADVANCED_FACE('',(#198661),#198772,.T.); +#198661 = FACE_BOUND('',#198662,.F.); +#198662 = EDGE_LOOP('',(#198663,#198674,#198682,#198691,#198699,#198707, + #198716,#198724,#198732,#198741,#198749,#198758,#198766)); +#198663 = ORIENTED_EDGE('',*,*,#198664,.T.); +#198664 = EDGE_CURVE('',#198665,#198667,#198669,.T.); +#198665 = VERTEX_POINT('',#198666); +#198666 = CARTESIAN_POINT('',(185.00533,-79.799883,1.585)); +#198667 = VERTEX_POINT('',#198668); +#198668 = CARTESIAN_POINT('',(185.056297,-79.602583,1.585)); +#198669 = CIRCLE('',#198670,0.109622033244); +#198670 = AXIS2_PLACEMENT_3D('',#198671,#198672,#198673); +#198671 = CARTESIAN_POINT('',(185.06997256399,-79.7113486615,1.585)); +#198672 = DIRECTION('',(0.,0.,-1.)); +#198673 = DIRECTION('',(-0.589685869507,-0.807632698263,-0.)); +#198674 = ORIENTED_EDGE('',*,*,#198675,.T.); +#198675 = EDGE_CURVE('',#198667,#198676,#198678,.T.); +#198676 = VERTEX_POINT('',#198677); +#198677 = CARTESIAN_POINT('',(186.69186,-79.603308,1.585)); +#198678 = LINE('',#198679,#198680); +#198679 = CARTESIAN_POINT('',(185.056297,-79.602583,1.585)); +#198680 = VECTOR('',#198681,1.); +#198681 = DIRECTION('',(0.999999901755,-4.432723953617E-04,0.)); +#198682 = ORIENTED_EDGE('',*,*,#198683,.T.); +#198683 = EDGE_CURVE('',#198676,#198684,#198686,.T.); +#198684 = VERTEX_POINT('',#198685); +#198685 = CARTESIAN_POINT('',(186.69186,-79.81908,1.585)); +#198686 = CIRCLE('',#198687,0.109999639072); +#198687 = AXIS2_PLACEMENT_3D('',#198688,#198689,#198690); +#198688 = CARTESIAN_POINT('',(186.6704,-79.711194,1.585)); +#198689 = DIRECTION('',(0.,0.,-1.)); +#198690 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#198691 = ORIENTED_EDGE('',*,*,#198692,.T.); +#198692 = EDGE_CURVE('',#198684,#198693,#198695,.T.); +#198693 = VERTEX_POINT('',#198694); +#198694 = CARTESIAN_POINT('',(185.566231,-79.821194,1.585)); +#198695 = LINE('',#198696,#198697); +#198696 = CARTESIAN_POINT('',(186.69186,-79.81908,1.585)); +#198697 = VECTOR('',#198698,1.); +#198698 = DIRECTION('',(-0.999998236448,-1.878057754248E-03,0.)); +#198699 = ORIENTED_EDGE('',*,*,#198700,.T.); +#198700 = EDGE_CURVE('',#198693,#198701,#198703,.T.); +#198701 = VERTEX_POINT('',#198702); +#198702 = CARTESIAN_POINT('',(186.278327,-80.155839,1.585)); +#198703 = LINE('',#198704,#198705); +#198704 = CARTESIAN_POINT('',(185.566231,-79.821194,1.585)); +#198705 = VECTOR('',#198706,1.); +#198706 = DIRECTION('',(0.905043330299,-0.425319374449,0.)); +#198707 = ORIENTED_EDGE('',*,*,#198708,.T.); +#198708 = EDGE_CURVE('',#198701,#198709,#198711,.T.); +#198709 = VERTEX_POINT('',#198710); +#198710 = CARTESIAN_POINT('',(186.267628,-80.339555,1.585)); +#198711 = CIRCLE('',#198712,0.109495944293); +#198712 = AXIS2_PLACEMENT_3D('',#198713,#198714,#198715); +#198713 = CARTESIAN_POINT('',(186.21372427126,-80.24424629187,1.585)); +#198714 = DIRECTION('',(0.,0.,-1.)); +#198715 = DIRECTION('',(0.590001110588,0.807402433428,0.)); +#198716 = ORIENTED_EDGE('',*,*,#198717,.T.); +#198717 = EDGE_CURVE('',#198709,#198718,#198720,.T.); +#198718 = VERTEX_POINT('',#198719); +#198719 = CARTESIAN_POINT('',(185.566232,-80.667861,1.585)); +#198720 = LINE('',#198721,#198722); +#198721 = CARTESIAN_POINT('',(186.267628,-80.339555,1.585)); +#198722 = VECTOR('',#198723,1.); +#198723 = DIRECTION('',(-0.905693707643,-0.423932669107,0.)); +#198724 = ORIENTED_EDGE('',*,*,#198725,.T.); +#198725 = EDGE_CURVE('',#198718,#198726,#198728,.T.); +#198726 = VERTEX_POINT('',#198727); +#198727 = CARTESIAN_POINT('',(186.69186,-80.669975,1.585)); +#198728 = LINE('',#198729,#198730); +#198729 = CARTESIAN_POINT('',(185.566232,-80.667861,1.585)); +#198730 = VECTOR('',#198731,1.); +#198731 = DIRECTION('',(0.999998236445,-1.878059422683E-03,0.)); +#198732 = ORIENTED_EDGE('',*,*,#198733,.T.); +#198733 = EDGE_CURVE('',#198726,#198734,#198736,.T.); +#198734 = VERTEX_POINT('',#198735); +#198735 = CARTESIAN_POINT('',(186.69186,-80.885747,1.585)); +#198736 = CIRCLE('',#198737,0.109999639072); +#198737 = AXIS2_PLACEMENT_3D('',#198738,#198739,#198740); +#198738 = CARTESIAN_POINT('',(186.6704,-80.777861,1.585)); +#198739 = DIRECTION('',(0.,0.,-1.)); +#198740 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#198741 = ORIENTED_EDGE('',*,*,#198742,.T.); +#198742 = EDGE_CURVE('',#198734,#198743,#198745,.T.); +#198743 = VERTEX_POINT('',#198744); +#198744 = CARTESIAN_POINT('',(185.04894,-80.885747,1.585)); +#198745 = LINE('',#198746,#198747); +#198746 = CARTESIAN_POINT('',(186.69186,-80.885747,1.585)); +#198747 = VECTOR('',#198748,1.); +#198748 = DIRECTION('',(-1.,0.,0.)); +#198749 = ORIENTED_EDGE('',*,*,#198750,.T.); +#198750 = EDGE_CURVE('',#198743,#198751,#198753,.T.); +#198751 = VERTEX_POINT('',#198752); +#198752 = CARTESIAN_POINT('',(185.011693,-80.685402,1.585)); +#198753 = CIRCLE('',#198754,0.109622353499); +#198754 = AXIS2_PLACEMENT_3D('',#198755,#198756,#198757); +#198755 = CARTESIAN_POINT('',(185.07007889837,-80.77818210162,1.585)); +#198756 = DIRECTION('',(0.,0.,-1.)); +#198757 = DIRECTION('',(-0.192833830868,-0.981231427173,-0.)); +#198758 = ORIENTED_EDGE('',*,*,#198759,.T.); +#198759 = EDGE_CURVE('',#198751,#198760,#198762,.T.); +#198760 = VERTEX_POINT('',#198761); +#198761 = CARTESIAN_POINT('',(185.95314,-80.244527,1.585)); +#198762 = LINE('',#198763,#198764); +#198763 = CARTESIAN_POINT('',(185.011693,-80.685402,1.585)); +#198764 = VECTOR('',#198765,1.); +#198765 = DIRECTION('',(0.905617200567,0.424096081139,0.)); +#198766 = ORIENTED_EDGE('',*,*,#198767,.T.); +#198767 = EDGE_CURVE('',#198760,#198665,#198768,.T.); +#198768 = LINE('',#198769,#198770); +#198769 = CARTESIAN_POINT('',(185.95314,-80.244527,1.585)); +#198770 = VECTOR('',#198771,1.); +#198771 = DIRECTION('',(-0.905327454208,0.424714257656,0.)); +#198772 = PLANE('',#198773); +#198773 = AXIS2_PLACEMENT_3D('',#198774,#198775,#198776); +#198774 = CARTESIAN_POINT('',(0.,0.,1.585)); +#198775 = DIRECTION('',(0.,0.,1.)); +#198776 = DIRECTION('',(1.,0.,-0.)); +#198777 = SHELL_BASED_SURFACE_MODEL('',(#198778)); +#198778 = OPEN_SHELL('',(#198779)); +#198779 = ADVANCED_FACE('',(#198780),#199021,.T.); +#198780 = FACE_BOUND('',#198781,.F.); +#198781 = EDGE_LOOP('',(#198782,#198793,#198801,#198809,#198817,#198825, + #198834,#198842,#198851,#198859,#198867,#198875,#198883,#198891, + #198899,#198908,#198916,#198924,#198932,#198940,#198949,#198957, + #198965,#198973,#198982,#198990,#198998,#199006,#199015)); +#198782 = ORIENTED_EDGE('',*,*,#198783,.T.); +#198783 = EDGE_CURVE('',#198784,#198786,#198788,.T.); +#198784 = VERTEX_POINT('',#198785); +#198785 = CARTESIAN_POINT('',(113.688882,-79.792856,1.585)); +#198786 = VERTEX_POINT('',#198787); +#198787 = CARTESIAN_POINT('',(113.753882,-79.727856,1.585)); +#198788 = CIRCLE('',#198789,6.500103935389E-02); +#198789 = AXIS2_PLACEMENT_3D('',#198790,#198791,#198792); +#198790 = CARTESIAN_POINT('',(113.75388303934,-79.79285703934,1.585)); +#198791 = DIRECTION('',(0.,0.,-1.)); +#198792 = DIRECTION('',(-0.999999999872,1.598967627357E-05,0.)); +#198793 = ORIENTED_EDGE('',*,*,#198794,.T.); +#198794 = EDGE_CURVE('',#198786,#198795,#198797,.T.); +#198795 = VERTEX_POINT('',#198796); +#198796 = CARTESIAN_POINT('',(114.053882,-79.727856,1.585)); +#198797 = LINE('',#198798,#198799); +#198798 = CARTESIAN_POINT('',(113.753882,-79.727856,1.585)); +#198799 = VECTOR('',#198800,1.); +#198800 = DIRECTION('',(1.,0.,0.)); +#198801 = ORIENTED_EDGE('',*,*,#198802,.T.); +#198802 = EDGE_CURVE('',#198795,#198803,#198805,.T.); +#198803 = VERTEX_POINT('',#198804); +#198804 = CARTESIAN_POINT('',(114.078756,-79.732804,1.585)); +#198805 = LINE('',#198806,#198807); +#198806 = CARTESIAN_POINT('',(114.053882,-79.727856,1.585)); +#198807 = VECTOR('',#198808,1.); +#198808 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#198809 = ORIENTED_EDGE('',*,*,#198810,.T.); +#198810 = EDGE_CURVE('',#198803,#198811,#198813,.T.); +#198811 = VERTEX_POINT('',#198812); +#198812 = CARTESIAN_POINT('',(114.099843,-79.746894,1.585)); +#198813 = LINE('',#198814,#198815); +#198814 = CARTESIAN_POINT('',(114.078756,-79.732804,1.585)); +#198815 = VECTOR('',#198816,1.); +#198816 = DIRECTION('',(0.831467480074,-0.555573424111,0.)); +#198817 = ORIENTED_EDGE('',*,*,#198818,.T.); +#198818 = EDGE_CURVE('',#198811,#198819,#198821,.T.); +#198819 = VERTEX_POINT('',#198820); +#198820 = CARTESIAN_POINT('',(114.151003,-79.802175,1.585)); +#198821 = LINE('',#198822,#198823); +#198822 = CARTESIAN_POINT('',(114.099843,-79.746894,1.585)); +#198823 = VECTOR('',#198824,1.); +#198824 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#198825 = ORIENTED_EDGE('',*,*,#198826,.T.); +#198826 = EDGE_CURVE('',#198819,#198827,#198829,.T.); +#198827 = VERTEX_POINT('',#198828); +#198828 = CARTESIAN_POINT('',(114.150999,-80.212113,1.585)); +#198829 = CIRCLE('',#198830,0.409312568567); +#198830 = AXIS2_PLACEMENT_3D('',#198831,#198832,#198833); +#198831 = CARTESIAN_POINT('',(113.79670664807,-80.00714054294,1.585)); +#198832 = DIRECTION('',(0.,0.,-1.)); +#198833 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#198834 = ORIENTED_EDGE('',*,*,#198835,.T.); +#198835 = EDGE_CURVE('',#198827,#198836,#198838,.T.); +#198836 = VERTEX_POINT('',#198837); +#198837 = CARTESIAN_POINT('',(114.048322,-80.316036,1.585)); +#198838 = LINE('',#198839,#198840); +#198839 = CARTESIAN_POINT('',(114.150999,-80.212113,1.585)); +#198840 = VECTOR('',#198841,1.); +#198841 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#198842 = ORIENTED_EDGE('',*,*,#198843,.T.); +#198843 = EDGE_CURVE('',#198836,#198844,#198846,.T.); +#198844 = VERTEX_POINT('',#198845); +#198845 = CARTESIAN_POINT('',(113.609546,-80.413058,1.585)); +#198846 = CIRCLE('',#198847,0.675422176574); +#198847 = AXIS2_PLACEMENT_3D('',#198848,#198849,#198850); +#198848 = CARTESIAN_POINT('',(113.69141275007,-79.74261564465,1.585)); +#198849 = DIRECTION('',(0.,0.,-1.)); +#198850 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#198851 = ORIENTED_EDGE('',*,*,#198852,.T.); +#198852 = EDGE_CURVE('',#198844,#198853,#198855,.T.); +#198853 = VERTEX_POINT('',#198854); +#198854 = CARTESIAN_POINT('',(113.424813,-80.36528,1.585)); +#198855 = LINE('',#198856,#198857); +#198856 = CARTESIAN_POINT('',(113.609546,-80.413058,1.585)); +#198857 = VECTOR('',#198858,1.); +#198858 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#198859 = ORIENTED_EDGE('',*,*,#198860,.T.); +#198860 = EDGE_CURVE('',#198853,#198861,#198863,.T.); +#198861 = VERTEX_POINT('',#198862); +#198862 = CARTESIAN_POINT('',(113.322206,-80.310247,1.585)); +#198863 = LINE('',#198864,#198865); +#198864 = CARTESIAN_POINT('',(113.424813,-80.36528,1.585)); +#198865 = VECTOR('',#198866,1.); +#198866 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#198867 = ORIENTED_EDGE('',*,*,#198868,.T.); +#198868 = EDGE_CURVE('',#198861,#198869,#198871,.T.); +#198869 = VERTEX_POINT('',#198870); +#198870 = CARTESIAN_POINT('',(113.228191,-80.212109,1.585)); +#198871 = LINE('',#198872,#198873); +#198872 = CARTESIAN_POINT('',(113.322206,-80.310247,1.585)); +#198873 = VECTOR('',#198874,1.); +#198874 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#198875 = ORIENTED_EDGE('',*,*,#198876,.T.); +#198876 = EDGE_CURVE('',#198869,#198877,#198879,.T.); +#198877 = VERTEX_POINT('',#198878); +#198878 = CARTESIAN_POINT('',(113.17663,-80.060221,1.585)); +#198879 = LINE('',#198880,#198881); +#198880 = CARTESIAN_POINT('',(113.228191,-80.212109,1.585)); +#198881 = VECTOR('',#198882,1.); +#198882 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#198883 = ORIENTED_EDGE('',*,*,#198884,.T.); +#198884 = EDGE_CURVE('',#198877,#198885,#198887,.T.); +#198885 = VERTEX_POINT('',#198886); +#198886 = CARTESIAN_POINT('',(113.177512,-79.906771,1.585)); +#198887 = LINE('',#198888,#198889); +#198888 = CARTESIAN_POINT('',(113.17663,-80.060221,1.585)); +#198889 = VECTOR('',#198890,1.); +#198890 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#198891 = ORIENTED_EDGE('',*,*,#198892,.T.); +#198892 = EDGE_CURVE('',#198885,#198893,#198895,.T.); +#198893 = VERTEX_POINT('',#198894); +#198894 = CARTESIAN_POINT('',(113.224316,-79.806644,1.585)); +#198895 = LINE('',#198896,#198897); +#198896 = CARTESIAN_POINT('',(113.177512,-79.906771,1.585)); +#198897 = VECTOR('',#198898,1.); +#198898 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#198899 = ORIENTED_EDGE('',*,*,#198900,.T.); +#198900 = EDGE_CURVE('',#198893,#198901,#198903,.T.); +#198901 = VERTEX_POINT('',#198902); +#198902 = CARTESIAN_POINT('',(113.340592,-79.864782,1.585)); +#198903 = CIRCLE('',#198904,6.500026004258E-02); +#198904 = AXIS2_PLACEMENT_3D('',#198905,#198906,#198907); +#198905 = CARTESIAN_POINT('',(113.28245365279,-79.8357136944,1.585)); +#198906 = DIRECTION('',(0.,0.,-1.)); +#198907 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#198908 = ORIENTED_EDGE('',*,*,#198909,.T.); +#198909 = EDGE_CURVE('',#198901,#198910,#198912,.T.); +#198910 = VERTEX_POINT('',#198911); +#198911 = CARTESIAN_POINT('',(113.304597,-79.936772,1.585)); +#198912 = LINE('',#198913,#198914); +#198913 = CARTESIAN_POINT('',(113.340592,-79.864782,1.585)); +#198914 = VECTOR('',#198915,1.); +#198915 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#198916 = ORIENTED_EDGE('',*,*,#198917,.T.); +#198917 = EDGE_CURVE('',#198910,#198918,#198920,.T.); +#198918 = VERTEX_POINT('',#198919); +#198919 = CARTESIAN_POINT('',(113.304597,-80.039452,1.585)); +#198920 = LINE('',#198921,#198922); +#198921 = CARTESIAN_POINT('',(113.304597,-79.936772,1.585)); +#198922 = VECTOR('',#198923,1.); +#198923 = DIRECTION('',(0.,-1.,0.)); +#198924 = ORIENTED_EDGE('',*,*,#198925,.T.); +#198925 = EDGE_CURVE('',#198918,#198926,#198928,.T.); +#198926 = VERTEX_POINT('',#198927); +#198927 = CARTESIAN_POINT('',(113.339265,-80.143457,1.585)); +#198928 = LINE('',#198929,#198930); +#198929 = CARTESIAN_POINT('',(113.304597,-80.039452,1.585)); +#198930 = VECTOR('',#198931,1.); +#198931 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#198932 = ORIENTED_EDGE('',*,*,#198933,.T.); +#198933 = EDGE_CURVE('',#198926,#198934,#198936,.T.); +#198934 = VERTEX_POINT('',#198935); +#198935 = CARTESIAN_POINT('',(113.406669,-80.210863,1.585)); +#198936 = LINE('',#198937,#198938); +#198937 = CARTESIAN_POINT('',(113.339265,-80.143457,1.585)); +#198938 = VECTOR('',#198939,1.); +#198939 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#198940 = ORIENTED_EDGE('',*,*,#198941,.T.); +#198941 = EDGE_CURVE('',#198934,#198942,#198944,.T.); +#198942 = VERTEX_POINT('',#198943); +#198943 = CARTESIAN_POINT('',(113.745881,-80.284999,1.585)); +#198944 = CIRCLE('',#198945,0.553317785495); +#198945 = AXIS2_PLACEMENT_3D('',#198946,#198947,#198948); +#198946 = CARTESIAN_POINT('',(113.6884500839,-79.73466976979,1.585)); +#198947 = DIRECTION('',(0.,0.,1.)); +#198948 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#198949 = ORIENTED_EDGE('',*,*,#198950,.T.); +#198950 = EDGE_CURVE('',#198942,#198951,#198953,.T.); +#198951 = VERTEX_POINT('',#198952); +#198952 = CARTESIAN_POINT('',(113.902622,-80.245813,1.585)); +#198953 = LINE('',#198954,#198955); +#198954 = CARTESIAN_POINT('',(113.745881,-80.284999,1.585)); +#198955 = VECTOR('',#198956,1.); +#198956 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#198957 = ORIENTED_EDGE('',*,*,#198958,.T.); +#198958 = EDGE_CURVE('',#198951,#198959,#198961,.T.); +#198959 = VERTEX_POINT('',#198960); +#198960 = CARTESIAN_POINT('',(113.972522,-80.210864,1.585)); +#198961 = LINE('',#198962,#198963); +#198962 = CARTESIAN_POINT('',(113.902622,-80.245813,1.585)); +#198963 = VECTOR('',#198964,1.); +#198964 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#198965 = ORIENTED_EDGE('',*,*,#198966,.T.); +#198966 = EDGE_CURVE('',#198959,#198967,#198969,.T.); +#198967 = VERTEX_POINT('',#198968); +#198968 = CARTESIAN_POINT('',(114.039928,-80.143457,1.585)); +#198969 = LINE('',#198970,#198971); +#198970 = CARTESIAN_POINT('',(113.972522,-80.210864,1.585)); +#198971 = VECTOR('',#198972,1.); +#198972 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#198973 = ORIENTED_EDGE('',*,*,#198974,.T.); +#198974 = EDGE_CURVE('',#198967,#198975,#198977,.T.); +#198975 = VERTEX_POINT('',#198976); +#198976 = CARTESIAN_POINT('',(114.039928,-79.870825,1.585)); +#198977 = CIRCLE('',#198978,0.272194686174); +#198978 = AXIS2_PLACEMENT_3D('',#198979,#198980,#198981); +#198979 = CARTESIAN_POINT('',(113.80432686391,-80.007141,1.585)); +#198980 = DIRECTION('',(0.,-0.,1.)); +#198981 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#198982 = ORIENTED_EDGE('',*,*,#198983,.T.); +#198983 = EDGE_CURVE('',#198975,#198984,#198986,.T.); +#198984 = VERTEX_POINT('',#198985); +#198985 = CARTESIAN_POINT('',(114.026959,-79.857856,1.585)); +#198986 = LINE('',#198987,#198988); +#198987 = CARTESIAN_POINT('',(114.039928,-79.870825,1.585)); +#198988 = VECTOR('',#198989,1.); +#198989 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#198990 = ORIENTED_EDGE('',*,*,#198991,.T.); +#198991 = EDGE_CURVE('',#198984,#198992,#198994,.T.); +#198992 = VERTEX_POINT('',#198993); +#198993 = CARTESIAN_POINT('',(113.818882,-79.857856,1.585)); +#198994 = LINE('',#198995,#198996); +#198995 = CARTESIAN_POINT('',(114.026959,-79.857856,1.585)); +#198996 = VECTOR('',#198997,1.); +#198997 = DIRECTION('',(-1.,0.,0.)); +#198998 = ORIENTED_EDGE('',*,*,#198999,.T.); +#198999 = EDGE_CURVE('',#198992,#199000,#199002,.T.); +#199000 = VERTEX_POINT('',#199001); +#199001 = CARTESIAN_POINT('',(113.818882,-79.964285,1.585)); +#199002 = LINE('',#199003,#199004); +#199003 = CARTESIAN_POINT('',(113.818882,-79.857856,1.585)); +#199004 = VECTOR('',#199005,1.); +#199005 = DIRECTION('',(0.,-1.,0.)); +#199006 = ORIENTED_EDGE('',*,*,#199007,.T.); +#199007 = EDGE_CURVE('',#199000,#199008,#199010,.T.); +#199008 = VERTEX_POINT('',#199009); +#199009 = CARTESIAN_POINT('',(113.688882,-79.964285,1.585)); +#199010 = CIRCLE('',#199011,6.500000000091E-02); +#199011 = AXIS2_PLACEMENT_3D('',#199012,#199013,#199014); +#199012 = CARTESIAN_POINT('',(113.753882,-79.96428465513,1.585)); +#199013 = DIRECTION('',(-0.,0.,-1.)); +#199014 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#199015 = ORIENTED_EDGE('',*,*,#199016,.T.); +#199016 = EDGE_CURVE('',#199008,#198784,#199017,.T.); +#199017 = LINE('',#199018,#199019); +#199018 = CARTESIAN_POINT('',(113.688882,-79.964285,1.585)); +#199019 = VECTOR('',#199020,1.); +#199020 = DIRECTION('',(0.,1.,0.)); +#199021 = PLANE('',#199022); +#199022 = AXIS2_PLACEMENT_3D('',#199023,#199024,#199025); +#199023 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199024 = DIRECTION('',(0.,0.,1.)); +#199025 = DIRECTION('',(1.,0.,-0.)); +#199026 = SHELL_BASED_SURFACE_MODEL('',(#199027)); +#199027 = OPEN_SHELL('',(#199028)); +#199028 = ADVANCED_FACE('',(#199029,#199114),#199173,.T.); +#199029 = FACE_BOUND('',#199030,.F.); +#199030 = EDGE_LOOP('',(#199031,#199042,#199050,#199058,#199066,#199075, + #199083,#199092,#199100,#199108)); +#199031 = ORIENTED_EDGE('',*,*,#199032,.T.); +#199032 = EDGE_CURVE('',#199033,#199035,#199037,.T.); +#199033 = VERTEX_POINT('',#199034); +#199034 = CARTESIAN_POINT('',(206.126866,-79.450458,1.585)); +#199035 = VERTEX_POINT('',#199036); +#199036 = CARTESIAN_POINT('',(206.610776,-79.521354,1.585)); +#199037 = CIRCLE('',#199038,0.34461174713); +#199038 = AXIS2_PLACEMENT_3D('',#199039,#199040,#199041); +#199039 = CARTESIAN_POINT('',(206.33362294377,-79.72615497579,1.585)); +#199040 = DIRECTION('',(0.,0.,-1.)); +#199041 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#199042 = ORIENTED_EDGE('',*,*,#199043,.T.); +#199043 = EDGE_CURVE('',#199035,#199044,#199046,.T.); +#199044 = VERTEX_POINT('',#199045); +#199045 = CARTESIAN_POINT('',(206.668837,-79.641801,1.585)); +#199046 = LINE('',#199047,#199048); +#199047 = CARTESIAN_POINT('',(206.610776,-79.521354,1.585)); +#199048 = VECTOR('',#199049,1.); +#199049 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#199050 = ORIENTED_EDGE('',*,*,#199051,.T.); +#199051 = EDGE_CURVE('',#199044,#199052,#199054,.T.); +#199052 = VERTEX_POINT('',#199053); +#199053 = CARTESIAN_POINT('',(206.670278,-79.962385,1.585)); +#199054 = LINE('',#199055,#199056); +#199055 = CARTESIAN_POINT('',(206.668837,-79.641801,1.585)); +#199056 = VECTOR('',#199057,1.); +#199057 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#199058 = ORIENTED_EDGE('',*,*,#199059,.T.); +#199059 = EDGE_CURVE('',#199052,#199060,#199062,.T.); +#199060 = VERTEX_POINT('',#199061); +#199061 = CARTESIAN_POINT('',(207.086101,-79.963826,1.585)); +#199062 = LINE('',#199063,#199064); +#199063 = CARTESIAN_POINT('',(206.670278,-79.962385,1.585)); +#199064 = VECTOR('',#199065,1.); +#199065 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#199066 = ORIENTED_EDGE('',*,*,#199067,.T.); +#199067 = EDGE_CURVE('',#199060,#199068,#199070,.T.); +#199068 = VERTEX_POINT('',#199069); +#199069 = CARTESIAN_POINT('',(207.071469,-80.112385,1.585)); +#199070 = CIRCLE('',#199071,7.500006711464E-02); +#199071 = AXIS2_PLACEMENT_3D('',#199072,#199073,#199074); +#199072 = CARTESIAN_POINT('',(207.07146906711,-80.03738493288,1.585)); +#199073 = DIRECTION('',(0.,0.,-1.)); +#199074 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#199075 = ORIENTED_EDGE('',*,*,#199076,.T.); +#199076 = EDGE_CURVE('',#199068,#199077,#199079,.T.); +#199077 = VERTEX_POINT('',#199078); +#199078 = CARTESIAN_POINT('',(206.056837,-80.110944,1.585)); +#199079 = LINE('',#199080,#199081); +#199080 = CARTESIAN_POINT('',(207.071469,-80.112385,1.585)); +#199081 = VECTOR('',#199082,1.); +#199082 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#199083 = ORIENTED_EDGE('',*,*,#199084,.T.); +#199084 = EDGE_CURVE('',#199077,#199085,#199087,.T.); +#199085 = VERTEX_POINT('',#199086); +#199086 = CARTESIAN_POINT('',(205.996469,-80.037385,1.585)); +#199087 = CIRCLE('',#199088,7.500074938986E-02); +#199088 = AXIS2_PLACEMENT_3D('',#199089,#199090,#199091); +#199089 = CARTESIAN_POINT('',(206.07146974938,-80.03738453389,1.585)); +#199090 = DIRECTION('',(0.,0.,-1.)); +#199091 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#199092 = ORIENTED_EDGE('',*,*,#199093,.T.); +#199093 = EDGE_CURVE('',#199085,#199094,#199096,.T.); +#199094 = VERTEX_POINT('',#199095); +#199095 = CARTESIAN_POINT('',(205.999132,-79.636624,1.585)); +#199096 = LINE('',#199097,#199098); +#199097 = CARTESIAN_POINT('',(205.996469,-80.037385,1.585)); +#199098 = VECTOR('',#199099,1.); +#199099 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#199100 = ORIENTED_EDGE('',*,*,#199101,.T.); +#199101 = EDGE_CURVE('',#199094,#199102,#199104,.T.); +#199102 = VERTEX_POINT('',#199103); +#199103 = CARTESIAN_POINT('',(206.061336,-79.513911,1.585)); +#199104 = LINE('',#199105,#199106); +#199105 = CARTESIAN_POINT('',(205.999132,-79.636624,1.585)); +#199106 = VECTOR('',#199107,1.); +#199107 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#199108 = ORIENTED_EDGE('',*,*,#199109,.T.); +#199109 = EDGE_CURVE('',#199102,#199033,#199110,.T.); +#199110 = LINE('',#199111,#199112); +#199111 = CARTESIAN_POINT('',(206.061336,-79.513911,1.585)); +#199112 = VECTOR('',#199113,1.); +#199113 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#199114 = FACE_BOUND('',#199115,.F.); +#199115 = EDGE_LOOP('',(#199116,#199127,#199135,#199143,#199151,#199159, + #199167)); +#199116 = ORIENTED_EDGE('',*,*,#199117,.T.); +#199117 = EDGE_CURVE('',#199118,#199120,#199122,.T.); +#199118 = VERTEX_POINT('',#199119); +#199119 = CARTESIAN_POINT('',(206.455613,-79.575215,1.585)); +#199120 = VERTEX_POINT('',#199121); +#199121 = CARTESIAN_POINT('',(206.180727,-79.605622,1.585)); +#199122 = CIRCLE('',#199123,0.198386215365); +#199123 = AXIS2_PLACEMENT_3D('',#199124,#199125,#199126); +#199124 = CARTESIAN_POINT('',(206.33380995783,-79.7318071753,1.585)); +#199125 = DIRECTION('',(0.,0.,1.)); +#199126 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#199127 = ORIENTED_EDGE('',*,*,#199128,.T.); +#199128 = EDGE_CURVE('',#199120,#199129,#199131,.T.); +#199129 = VERTEX_POINT('',#199130); +#199130 = CARTESIAN_POINT('',(206.146469,-79.674138,1.585)); +#199131 = LINE('',#199132,#199133); +#199132 = CARTESIAN_POINT('',(206.180727,-79.605622,1.585)); +#199133 = VECTOR('',#199134,1.); +#199134 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#199135 = ORIENTED_EDGE('',*,*,#199136,.T.); +#199136 = EDGE_CURVE('',#199129,#199137,#199139,.T.); +#199137 = VERTEX_POINT('',#199138); +#199138 = CARTESIAN_POINT('',(206.146469,-79.962385,1.585)); +#199139 = LINE('',#199140,#199141); +#199140 = CARTESIAN_POINT('',(206.146469,-79.674138,1.585)); +#199141 = VECTOR('',#199142,1.); +#199142 = DIRECTION('',(0.,-1.,0.)); +#199143 = ORIENTED_EDGE('',*,*,#199144,.T.); +#199144 = EDGE_CURVE('',#199137,#199145,#199147,.T.); +#199145 = VERTEX_POINT('',#199146); +#199146 = CARTESIAN_POINT('',(206.520278,-79.962385,1.585)); +#199147 = LINE('',#199148,#199149); +#199148 = CARTESIAN_POINT('',(206.146469,-79.962385,1.585)); +#199149 = VECTOR('',#199150,1.); +#199150 = DIRECTION('',(1.,0.,0.)); +#199151 = ORIENTED_EDGE('',*,*,#199152,.T.); +#199152 = EDGE_CURVE('',#199145,#199153,#199155,.T.); +#199153 = VERTEX_POINT('',#199154); +#199154 = CARTESIAN_POINT('',(206.520278,-79.674138,1.585)); +#199155 = LINE('',#199156,#199157); +#199156 = CARTESIAN_POINT('',(206.520278,-79.962385,1.585)); +#199157 = VECTOR('',#199158,1.); +#199158 = DIRECTION('',(0.,1.,0.)); +#199159 = ORIENTED_EDGE('',*,*,#199160,.T.); +#199160 = EDGE_CURVE('',#199153,#199161,#199163,.T.); +#199161 = VERTEX_POINT('',#199162); +#199162 = CARTESIAN_POINT('',(206.48602,-79.605622,1.585)); +#199163 = LINE('',#199164,#199165); +#199164 = CARTESIAN_POINT('',(206.520278,-79.674138,1.585)); +#199165 = VECTOR('',#199166,1.); +#199166 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#199167 = ORIENTED_EDGE('',*,*,#199168,.T.); +#199168 = EDGE_CURVE('',#199161,#199118,#199169,.T.); +#199169 = LINE('',#199170,#199171); +#199170 = CARTESIAN_POINT('',(206.48602,-79.605622,1.585)); +#199171 = VECTOR('',#199172,1.); +#199172 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#199173 = PLANE('',#199174); +#199174 = AXIS2_PLACEMENT_3D('',#199175,#199176,#199177); +#199175 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199176 = DIRECTION('',(0.,0.,1.)); +#199177 = DIRECTION('',(1.,0.,-0.)); +#199178 = SHELL_BASED_SURFACE_MODEL('',(#199179)); +#199179 = OPEN_SHELL('',(#199180)); +#199180 = ADVANCED_FACE('',(#199181),#199308,.T.); +#199181 = FACE_BOUND('',#199182,.F.); +#199182 = EDGE_LOOP('',(#199183,#199194,#199202,#199210,#199218,#199226, + #199235,#199243,#199251,#199259,#199268,#199276,#199285,#199293, + #199302)); +#199183 = ORIENTED_EDGE('',*,*,#199184,.T.); +#199184 = EDGE_CURVE('',#199185,#199187,#199189,.T.); +#199185 = VERTEX_POINT('',#199186); +#199186 = CARTESIAN_POINT('',(128.459597,-79.593571,1.585)); +#199187 = VERTEX_POINT('',#199188); +#199188 = CARTESIAN_POINT('',(128.459597,-79.463571,1.585)); +#199189 = CIRCLE('',#199190,6.500000000091E-02); +#199190 = AXIS2_PLACEMENT_3D('',#199191,#199192,#199193); +#199191 = CARTESIAN_POINT('',(128.45959734486,-79.528571,1.585)); +#199192 = DIRECTION('',(0.,0.,-1.)); +#199193 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#199194 = ORIENTED_EDGE('',*,*,#199195,.T.); +#199195 = EDGE_CURVE('',#199187,#199196,#199198,.T.); +#199196 = VERTEX_POINT('',#199197); +#199197 = CARTESIAN_POINT('',(129.191361,-79.464206,1.585)); +#199198 = LINE('',#199199,#199200); +#199199 = CARTESIAN_POINT('',(128.459597,-79.463571,1.585)); +#199200 = VECTOR('',#199201,1.); +#199201 = DIRECTION('',(0.999999623491,-8.677657836673E-04,0.)); +#199202 = ORIENTED_EDGE('',*,*,#199203,.T.); +#199203 = EDGE_CURVE('',#199196,#199204,#199206,.T.); +#199204 = VERTEX_POINT('',#199205); +#199205 = CARTESIAN_POINT('',(129.217237,-79.470433,1.585)); +#199206 = LINE('',#199207,#199208); +#199207 = CARTESIAN_POINT('',(129.191361,-79.464206,1.585)); +#199208 = VECTOR('',#199209,1.); +#199209 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#199210 = ORIENTED_EDGE('',*,*,#199211,.T.); +#199211 = EDGE_CURVE('',#199204,#199212,#199214,.T.); +#199212 = VERTEX_POINT('',#199213); +#199213 = CARTESIAN_POINT('',(129.319843,-79.525466,1.585)); +#199214 = LINE('',#199215,#199216); +#199215 = CARTESIAN_POINT('',(129.217237,-79.470433,1.585)); +#199216 = VECTOR('',#199217,1.); +#199217 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#199218 = ORIENTED_EDGE('',*,*,#199219,.T.); +#199219 = EDGE_CURVE('',#199212,#199220,#199222,.T.); +#199220 = VERTEX_POINT('',#199221); +#199221 = CARTESIAN_POINT('',(129.374878,-79.585216,1.585)); +#199222 = LINE('',#199223,#199224); +#199223 = CARTESIAN_POINT('',(129.319843,-79.525466,1.585)); +#199224 = VECTOR('',#199225,1.); +#199225 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#199226 = ORIENTED_EDGE('',*,*,#199227,.T.); +#199227 = EDGE_CURVE('',#199220,#199228,#199230,.T.); +#199228 = VERTEX_POINT('',#199229); +#199229 = CARTESIAN_POINT('',(129.368491,-79.99444,1.585)); +#199230 = CIRCLE('',#199231,0.358409955812); +#199231 = AXIS2_PLACEMENT_3D('',#199232,#199233,#199234); +#199232 = CARTESIAN_POINT('',(129.07747311066,-79.78523606955,1.585)); +#199233 = DIRECTION('',(0.,0.,-1.)); +#199234 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#199235 = ORIENTED_EDGE('',*,*,#199236,.T.); +#199236 = EDGE_CURVE('',#199228,#199237,#199239,.T.); +#199237 = VERTEX_POINT('',#199238); +#199238 = CARTESIAN_POINT('',(129.311186,-80.051746,1.585)); +#199239 = LINE('',#199240,#199241); +#199240 = CARTESIAN_POINT('',(129.368491,-79.99444,1.585)); +#199241 = VECTOR('',#199242,1.); +#199242 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#199243 = ORIENTED_EDGE('',*,*,#199244,.T.); +#199244 = EDGE_CURVE('',#199237,#199245,#199247,.T.); +#199245 = VERTEX_POINT('',#199246); +#199246 = CARTESIAN_POINT('',(129.202824,-80.104941,1.585)); +#199247 = LINE('',#199248,#199249); +#199248 = CARTESIAN_POINT('',(129.311186,-80.051746,1.585)); +#199249 = VECTOR('',#199250,1.); +#199250 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#199251 = ORIENTED_EDGE('',*,*,#199252,.T.); +#199252 = EDGE_CURVE('',#199245,#199253,#199255,.T.); +#199253 = VERTEX_POINT('',#199254); +#199254 = CARTESIAN_POINT('',(128.459597,-80.107857,1.585)); +#199255 = LINE('',#199256,#199257); +#199256 = CARTESIAN_POINT('',(129.202824,-80.104941,1.585)); +#199257 = VECTOR('',#199258,1.); +#199258 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#199259 = ORIENTED_EDGE('',*,*,#199260,.T.); +#199260 = EDGE_CURVE('',#199253,#199261,#199263,.T.); +#199261 = VERTEX_POINT('',#199262); +#199262 = CARTESIAN_POINT('',(128.459597,-79.977857,1.585)); +#199263 = CIRCLE('',#199264,6.500000000091E-02); +#199264 = AXIS2_PLACEMENT_3D('',#199265,#199266,#199267); +#199265 = CARTESIAN_POINT('',(128.45959734486,-80.042857,1.585)); +#199266 = DIRECTION('',(0.,0.,-1.)); +#199267 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#199268 = ORIENTED_EDGE('',*,*,#199269,.T.); +#199269 = EDGE_CURVE('',#199261,#199270,#199272,.T.); +#199270 = VERTEX_POINT('',#199271); +#199271 = CARTESIAN_POINT('',(129.172823,-79.977857,1.585)); +#199272 = LINE('',#199273,#199274); +#199273 = CARTESIAN_POINT('',(128.459597,-79.977857,1.585)); +#199274 = VECTOR('',#199275,1.); +#199275 = DIRECTION('',(1.,0.,0.)); +#199276 = ORIENTED_EDGE('',*,*,#199277,.T.); +#199277 = EDGE_CURVE('',#199270,#199278,#199280,.T.); +#199278 = VERTEX_POINT('',#199279); +#199279 = CARTESIAN_POINT('',(129.294597,-79.856083,1.585)); +#199280 = CIRCLE('',#199281,0.170996196456); +#199281 = AXIS2_PLACEMENT_3D('',#199282,#199283,#199284); +#199282 = CARTESIAN_POINT('',(129.1292465,-79.8125065,1.585)); +#199283 = DIRECTION('',(0.,0.,1.)); +#199284 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#199285 = ORIENTED_EDGE('',*,*,#199286,.T.); +#199286 = EDGE_CURVE('',#199278,#199287,#199289,.T.); +#199287 = VERTEX_POINT('',#199288); +#199288 = CARTESIAN_POINT('',(129.294597,-79.715344,1.585)); +#199289 = LINE('',#199290,#199291); +#199290 = CARTESIAN_POINT('',(129.294597,-79.856083,1.585)); +#199291 = VECTOR('',#199292,1.); +#199292 = DIRECTION('',(0.,1.,0.)); +#199293 = ORIENTED_EDGE('',*,*,#199294,.T.); +#199294 = EDGE_CURVE('',#199287,#199295,#199297,.T.); +#199295 = VERTEX_POINT('',#199296); +#199296 = CARTESIAN_POINT('',(129.172823,-79.593571,1.585)); +#199297 = CIRCLE('',#199298,0.170997370267); +#199298 = AXIS2_PLACEMENT_3D('',#199299,#199300,#199301); +#199299 = CARTESIAN_POINT('',(129.12924582251,-79.75892253534,1.585)); +#199300 = DIRECTION('',(0.,0.,1.)); +#199301 = DIRECTION('',(0.966980820969,0.254849155144,-0.)); +#199302 = ORIENTED_EDGE('',*,*,#199303,.T.); +#199303 = EDGE_CURVE('',#199295,#199185,#199304,.T.); +#199304 = LINE('',#199305,#199306); +#199305 = CARTESIAN_POINT('',(129.172823,-79.593571,1.585)); +#199306 = VECTOR('',#199307,1.); +#199307 = DIRECTION('',(-1.,0.,0.)); +#199308 = PLANE('',#199309); +#199309 = AXIS2_PLACEMENT_3D('',#199310,#199311,#199312); +#199310 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199311 = DIRECTION('',(0.,0.,1.)); +#199312 = DIRECTION('',(1.,0.,-0.)); +#199313 = SHELL_BASED_SURFACE_MODEL('',(#199314)); +#199314 = OPEN_SHELL('',(#199315)); +#199315 = ADVANCED_FACE('',(#199316,#199417),#199492,.T.); +#199316 = FACE_BOUND('',#199317,.F.); +#199317 = EDGE_LOOP('',(#199318,#199329,#199337,#199345,#199353,#199361, + #199369,#199378,#199386,#199395,#199403,#199411)); +#199318 = ORIENTED_EDGE('',*,*,#199319,.T.); +#199319 = EDGE_CURVE('',#199320,#199322,#199324,.T.); +#199320 = VERTEX_POINT('',#199321); +#199321 = CARTESIAN_POINT('',(145.33087,-79.241104,1.585)); +#199322 = VERTEX_POINT('',#199323); +#199323 = CARTESIAN_POINT('',(145.761693,-79.143695,1.585)); +#199324 = CIRCLE('',#199325,0.670538401945); +#199325 = AXIS2_PLACEMENT_3D('',#199326,#199327,#199328); +#199326 = CARTESIAN_POINT('',(145.68590657351,-79.80993682249,1.585)); +#199327 = DIRECTION('',(0.,0.,-1.)); +#199328 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#199329 = ORIENTED_EDGE('',*,*,#199330,.T.); +#199330 = EDGE_CURVE('',#199322,#199331,#199333,.T.); +#199331 = VERTEX_POINT('',#199332); +#199332 = CARTESIAN_POINT('',(145.95438,-79.191861,1.585)); +#199333 = LINE('',#199334,#199335); +#199334 = CARTESIAN_POINT('',(145.761693,-79.143695,1.585)); +#199335 = VECTOR('',#199336,1.); +#199336 = DIRECTION('',(0.970149311613,-0.242508377541,0.)); +#199337 = ORIENTED_EDGE('',*,*,#199338,.T.); +#199338 = EDGE_CURVE('',#199331,#199339,#199341,.T.); +#199339 = VERTEX_POINT('',#199340); +#199340 = CARTESIAN_POINT('',(146.056987,-79.246894,1.585)); +#199341 = LINE('',#199342,#199343); +#199342 = CARTESIAN_POINT('',(145.95438,-79.191861,1.585)); +#199343 = VECTOR('',#199344,1.); +#199344 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#199345 = ORIENTED_EDGE('',*,*,#199346,.T.); +#199346 = EDGE_CURVE('',#199339,#199347,#199349,.T.); +#199347 = VERTEX_POINT('',#199348); +#199348 = CARTESIAN_POINT('',(146.150999,-79.345027,1.585)); +#199349 = LINE('',#199350,#199351); +#199350 = CARTESIAN_POINT('',(146.056987,-79.246894,1.585)); +#199351 = VECTOR('',#199352,1.); +#199352 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#199353 = ORIENTED_EDGE('',*,*,#199354,.T.); +#199354 = EDGE_CURVE('',#199347,#199355,#199357,.T.); +#199355 = VERTEX_POINT('',#199356); +#199356 = CARTESIAN_POINT('',(146.202563,-79.496919,1.585)); +#199357 = LINE('',#199358,#199359); +#199358 = CARTESIAN_POINT('',(146.150999,-79.345027,1.585)); +#199359 = VECTOR('',#199360,1.); +#199360 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#199361 = ORIENTED_EDGE('',*,*,#199362,.T.); +#199362 = EDGE_CURVE('',#199355,#199363,#199365,.T.); +#199363 = VERTEX_POINT('',#199364); +#199364 = CARTESIAN_POINT('',(146.204597,-79.721428,1.585)); +#199365 = LINE('',#199366,#199367); +#199366 = CARTESIAN_POINT('',(146.202563,-79.496919,1.585)); +#199367 = VECTOR('',#199368,1.); +#199368 = DIRECTION('',(9.05939864485E-03,-0.999958962806,0.)); +#199369 = ORIENTED_EDGE('',*,*,#199370,.T.); +#199370 = EDGE_CURVE('',#199363,#199371,#199373,.T.); +#199371 = VERTEX_POINT('',#199372); +#199372 = CARTESIAN_POINT('',(146.139597,-79.786428,1.585)); +#199373 = CIRCLE('',#199374,6.500103935393E-02); +#199374 = AXIS2_PLACEMENT_3D('',#199375,#199376,#199377); +#199375 = CARTESIAN_POINT('',(146.13959596065,-79.72142696065,1.585)); +#199376 = DIRECTION('',(0.,0.,-1.)); +#199377 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#199378 = ORIENTED_EDGE('',*,*,#199379,.T.); +#199379 = EDGE_CURVE('',#199371,#199380,#199382,.T.); +#199380 = VERTEX_POINT('',#199381); +#199381 = CARTESIAN_POINT('',(145.239597,-79.786428,1.585)); +#199382 = LINE('',#199383,#199384); +#199383 = CARTESIAN_POINT('',(146.139597,-79.786428,1.585)); +#199384 = VECTOR('',#199385,1.); +#199385 = DIRECTION('',(-1.,0.,0.)); +#199386 = ORIENTED_EDGE('',*,*,#199387,.T.); +#199387 = EDGE_CURVE('',#199380,#199388,#199390,.T.); +#199388 = VERTEX_POINT('',#199389); +#199389 = CARTESIAN_POINT('',(145.174597,-79.721428,1.585)); +#199390 = CIRCLE('',#199391,6.500103935387E-02); +#199391 = AXIS2_PLACEMENT_3D('',#199392,#199393,#199394); +#199392 = CARTESIAN_POINT('',(145.23959803934,-79.72142696065,1.585)); +#199393 = DIRECTION('',(0.,0.,-1.)); +#199394 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#199395 = ORIENTED_EDGE('',*,*,#199396,.T.); +#199396 = EDGE_CURVE('',#199388,#199397,#199399,.T.); +#199397 = VERTEX_POINT('',#199398); +#199398 = CARTESIAN_POINT('',(145.17663,-79.496919,1.585)); +#199399 = LINE('',#199400,#199401); +#199400 = CARTESIAN_POINT('',(145.174597,-79.721428,1.585)); +#199401 = VECTOR('',#199402,1.); +#199402 = DIRECTION('',(9.05494502838E-03,0.999959003145,0.)); +#199403 = ORIENTED_EDGE('',*,*,#199404,.T.); +#199404 = EDGE_CURVE('',#199397,#199405,#199407,.T.); +#199405 = VERTEX_POINT('',#199406); +#199406 = CARTESIAN_POINT('',(145.228191,-79.345031,1.585)); +#199407 = LINE('',#199408,#199409); +#199408 = CARTESIAN_POINT('',(145.17663,-79.496919,1.585)); +#199409 = VECTOR('',#199410,1.); +#199410 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#199411 = ORIENTED_EDGE('',*,*,#199412,.T.); +#199412 = EDGE_CURVE('',#199405,#199320,#199413,.T.); +#199413 = LINE('',#199414,#199415); +#199414 = CARTESIAN_POINT('',(145.228191,-79.345031,1.585)); +#199415 = VECTOR('',#199416,1.); +#199416 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#199417 = FACE_BOUND('',#199418,.F.); +#199418 = EDGE_LOOP('',(#199419,#199430,#199438,#199446,#199454,#199462, + #199470,#199478,#199486)); +#199419 = ORIENTED_EDGE('',*,*,#199420,.T.); +#199420 = EDGE_CURVE('',#199421,#199423,#199425,.T.); +#199421 = VERTEX_POINT('',#199422); +#199422 = CARTESIAN_POINT('',(145.902622,-79.311327,1.585)); +#199423 = VERTEX_POINT('',#199424); +#199424 = CARTESIAN_POINT('',(145.406669,-79.346277,1.585)); +#199425 = CIRCLE('',#199426,0.559258743581); +#199426 = AXIS2_PLACEMENT_3D('',#199427,#199428,#199429); +#199427 = CARTESIAN_POINT('',(145.68986183298,-79.82853436035,1.585)); +#199428 = DIRECTION('',(0.,0.,1.)); +#199429 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#199430 = ORIENTED_EDGE('',*,*,#199431,.T.); +#199431 = EDGE_CURVE('',#199423,#199432,#199434,.T.); +#199432 = VERTEX_POINT('',#199433); +#199433 = CARTESIAN_POINT('',(145.339265,-79.413683,1.585)); +#199434 = LINE('',#199435,#199436); +#199435 = CARTESIAN_POINT('',(145.406669,-79.346277,1.585)); +#199436 = VECTOR('',#199437,1.); +#199437 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#199438 = ORIENTED_EDGE('',*,*,#199439,.T.); +#199439 = EDGE_CURVE('',#199432,#199440,#199442,.T.); +#199440 = VERTEX_POINT('',#199441); +#199441 = CARTESIAN_POINT('',(145.304597,-79.517689,1.585)); +#199442 = LINE('',#199443,#199444); +#199443 = CARTESIAN_POINT('',(145.339265,-79.413683,1.585)); +#199444 = VECTOR('',#199445,1.); +#199445 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#199446 = ORIENTED_EDGE('',*,*,#199447,.T.); +#199447 = EDGE_CURVE('',#199440,#199448,#199450,.T.); +#199448 = VERTEX_POINT('',#199449); +#199449 = CARTESIAN_POINT('',(145.304597,-79.656428,1.585)); +#199450 = LINE('',#199451,#199452); +#199451 = CARTESIAN_POINT('',(145.304597,-79.517689,1.585)); +#199452 = VECTOR('',#199453,1.); +#199453 = DIRECTION('',(0.,-1.,0.)); +#199454 = ORIENTED_EDGE('',*,*,#199455,.T.); +#199455 = EDGE_CURVE('',#199448,#199456,#199458,.T.); +#199456 = VERTEX_POINT('',#199457); +#199457 = CARTESIAN_POINT('',(146.074597,-79.656428,1.585)); +#199458 = LINE('',#199459,#199460); +#199459 = CARTESIAN_POINT('',(145.304597,-79.656428,1.585)); +#199460 = VECTOR('',#199461,1.); +#199461 = DIRECTION('',(1.,0.,0.)); +#199462 = ORIENTED_EDGE('',*,*,#199463,.T.); +#199463 = EDGE_CURVE('',#199456,#199464,#199466,.T.); +#199464 = VERTEX_POINT('',#199465); +#199465 = CARTESIAN_POINT('',(146.074597,-79.517689,1.585)); +#199466 = LINE('',#199467,#199468); +#199467 = CARTESIAN_POINT('',(146.074597,-79.656428,1.585)); +#199468 = VECTOR('',#199469,1.); +#199469 = DIRECTION('',(0.,1.,0.)); +#199470 = ORIENTED_EDGE('',*,*,#199471,.T.); +#199471 = EDGE_CURVE('',#199464,#199472,#199474,.T.); +#199472 = VERTEX_POINT('',#199473); +#199473 = CARTESIAN_POINT('',(146.039928,-79.413683,1.585)); +#199474 = LINE('',#199475,#199476); +#199475 = CARTESIAN_POINT('',(146.074597,-79.517689,1.585)); +#199476 = VECTOR('',#199477,1.); +#199477 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#199478 = ORIENTED_EDGE('',*,*,#199479,.T.); +#199479 = EDGE_CURVE('',#199472,#199480,#199482,.T.); +#199480 = VERTEX_POINT('',#199481); +#199481 = CARTESIAN_POINT('',(145.972522,-79.346277,1.585)); +#199482 = LINE('',#199483,#199484); +#199483 = CARTESIAN_POINT('',(146.039928,-79.413683,1.585)); +#199484 = VECTOR('',#199485,1.); +#199485 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#199486 = ORIENTED_EDGE('',*,*,#199487,.T.); +#199487 = EDGE_CURVE('',#199480,#199421,#199488,.T.); +#199488 = LINE('',#199489,#199490); +#199489 = CARTESIAN_POINT('',(145.972522,-79.346277,1.585)); +#199490 = VECTOR('',#199491,1.); +#199491 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#199492 = PLANE('',#199493); +#199493 = AXIS2_PLACEMENT_3D('',#199494,#199495,#199496); +#199494 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199495 = DIRECTION('',(0.,0.,1.)); +#199496 = DIRECTION('',(1.,0.,-0.)); +#199497 = SHELL_BASED_SURFACE_MODEL('',(#199498)); +#199498 = OPEN_SHELL('',(#199499)); +#199499 = ADVANCED_FACE('',(#199500),#199586,.T.); +#199500 = FACE_BOUND('',#199501,.F.); +#199501 = EDGE_LOOP('',(#199502,#199513,#199521,#199530,#199538,#199546, + #199555,#199563,#199572,#199580)); +#199502 = ORIENTED_EDGE('',*,*,#199503,.T.); +#199503 = EDGE_CURVE('',#199504,#199506,#199508,.T.); +#199504 = VERTEX_POINT('',#199505); +#199505 = CARTESIAN_POINT('',(113.239597,-78.957856,1.585)); +#199506 = VERTEX_POINT('',#199507); +#199507 = CARTESIAN_POINT('',(113.239597,-78.827856,1.585)); +#199508 = CIRCLE('',#199509,6.500000000092E-02); +#199509 = AXIS2_PLACEMENT_3D('',#199510,#199511,#199512); +#199510 = CARTESIAN_POINT('',(113.23959734486,-78.892856,1.585)); +#199511 = DIRECTION('',(0.,0.,-1.)); +#199512 = DIRECTION('',(-5.305658244296E-06,-0.999999999986,-0.)); +#199513 = ORIENTED_EDGE('',*,*,#199514,.T.); +#199514 = EDGE_CURVE('',#199506,#199515,#199517,.T.); +#199515 = VERTEX_POINT('',#199516); +#199516 = CARTESIAN_POINT('',(114.139597,-78.827856,1.585)); +#199517 = LINE('',#199518,#199519); +#199518 = CARTESIAN_POINT('',(113.239597,-78.827856,1.585)); +#199519 = VECTOR('',#199520,1.); +#199520 = DIRECTION('',(1.,0.,0.)); +#199521 = ORIENTED_EDGE('',*,*,#199522,.T.); +#199522 = EDGE_CURVE('',#199515,#199523,#199525,.T.); +#199523 = VERTEX_POINT('',#199524); +#199524 = CARTESIAN_POINT('',(114.171846,-78.949292,1.585)); +#199525 = CIRCLE('',#199526,6.500021194142E-02); +#199526 = AXIS2_PLACEMENT_3D('',#199527,#199528,#199529); +#199527 = CARTESIAN_POINT('',(114.13959651351,-78.89285621194,1.585)); +#199528 = DIRECTION('',(0.,0.,-1.)); +#199529 = DIRECTION('',(7.484332334091E-06,0.999999999972,0.)); +#199530 = ORIENTED_EDGE('',*,*,#199531,.T.); +#199531 = EDGE_CURVE('',#199523,#199532,#199534,.T.); +#199532 = VERTEX_POINT('',#199533); +#199533 = CARTESIAN_POINT('',(113.484359,-79.342142,1.585)); +#199534 = LINE('',#199535,#199536); +#199535 = CARTESIAN_POINT('',(114.171846,-78.949292,1.585)); +#199536 = VECTOR('',#199537,1.); +#199537 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#199538 = ORIENTED_EDGE('',*,*,#199539,.T.); +#199539 = EDGE_CURVE('',#199532,#199540,#199542,.T.); +#199540 = VERTEX_POINT('',#199541); +#199541 = CARTESIAN_POINT('',(114.139597,-79.342142,1.585)); +#199542 = LINE('',#199543,#199544); +#199543 = CARTESIAN_POINT('',(113.484359,-79.342142,1.585)); +#199544 = VECTOR('',#199545,1.); +#199545 = DIRECTION('',(1.,0.,0.)); +#199546 = ORIENTED_EDGE('',*,*,#199547,.T.); +#199547 = EDGE_CURVE('',#199540,#199548,#199550,.T.); +#199548 = VERTEX_POINT('',#199549); +#199549 = CARTESIAN_POINT('',(114.139597,-79.472142,1.585)); +#199550 = CIRCLE('',#199551,6.500000000092E-02); +#199551 = AXIS2_PLACEMENT_3D('',#199552,#199553,#199554); +#199552 = CARTESIAN_POINT('',(114.13959665513,-79.407142,1.585)); +#199553 = DIRECTION('',(0.,0.,-1.)); +#199554 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#199555 = ORIENTED_EDGE('',*,*,#199556,.T.); +#199556 = EDGE_CURVE('',#199548,#199557,#199559,.T.); +#199557 = VERTEX_POINT('',#199558); +#199558 = CARTESIAN_POINT('',(113.239597,-79.472142,1.585)); +#199559 = LINE('',#199560,#199561); +#199560 = CARTESIAN_POINT('',(114.139597,-79.472142,1.585)); +#199561 = VECTOR('',#199562,1.); +#199562 = DIRECTION('',(-1.,0.,0.)); +#199563 = ORIENTED_EDGE('',*,*,#199564,.T.); +#199564 = EDGE_CURVE('',#199557,#199565,#199567,.T.); +#199565 = VERTEX_POINT('',#199566); +#199566 = CARTESIAN_POINT('',(113.207348,-79.350706,1.585)); +#199567 = CIRCLE('',#199568,6.500021194142E-02); +#199568 = AXIS2_PLACEMENT_3D('',#199569,#199570,#199571); +#199569 = CARTESIAN_POINT('',(113.23959748648,-79.40714178806,1.585)); +#199570 = DIRECTION('',(0.,0.,-1.)); +#199571 = DIRECTION('',(-7.484332334091E-06,-0.999999999972,-0.)); +#199572 = ORIENTED_EDGE('',*,*,#199573,.T.); +#199573 = EDGE_CURVE('',#199565,#199574,#199576,.T.); +#199574 = VERTEX_POINT('',#199575); +#199575 = CARTESIAN_POINT('',(113.894835,-78.957856,1.585)); +#199576 = LINE('',#199577,#199578); +#199577 = CARTESIAN_POINT('',(113.207348,-79.350706,1.585)); +#199578 = VECTOR('',#199579,1.); +#199579 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#199580 = ORIENTED_EDGE('',*,*,#199581,.T.); +#199581 = EDGE_CURVE('',#199574,#199504,#199582,.T.); +#199582 = LINE('',#199583,#199584); +#199583 = CARTESIAN_POINT('',(113.894835,-78.957856,1.585)); +#199584 = VECTOR('',#199585,1.); +#199585 = DIRECTION('',(-1.,0.,0.)); +#199586 = PLANE('',#199587); +#199587 = AXIS2_PLACEMENT_3D('',#199588,#199589,#199590); +#199588 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199589 = DIRECTION('',(0.,0.,1.)); +#199590 = DIRECTION('',(1.,0.,-0.)); +#199591 = SHELL_BASED_SURFACE_MODEL('',(#199592)); +#199592 = OPEN_SHELL('',(#199593)); +#199593 = ADVANCED_FACE('',(#199594),#199721,.T.); +#199594 = FACE_BOUND('',#199595,.F.); +#199595 = EDGE_LOOP('',(#199596,#199607,#199615,#199623,#199631,#199639, + #199648,#199656,#199664,#199672,#199681,#199689,#199698,#199706, + #199715)); +#199596 = ORIENTED_EDGE('',*,*,#199597,.T.); +#199597 = EDGE_CURVE('',#199598,#199600,#199602,.T.); +#199598 = VERTEX_POINT('',#199599); +#199599 = CARTESIAN_POINT('',(121.909597,-78.793571,1.585)); +#199600 = VERTEX_POINT('',#199601); +#199601 = CARTESIAN_POINT('',(121.909597,-78.663571,1.585)); +#199602 = CIRCLE('',#199603,6.500000000091E-02); +#199603 = AXIS2_PLACEMENT_3D('',#199604,#199605,#199606); +#199604 = CARTESIAN_POINT('',(121.90959734486,-78.728571,1.585)); +#199605 = DIRECTION('',(0.,0.,-1.)); +#199606 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#199607 = ORIENTED_EDGE('',*,*,#199608,.T.); +#199608 = EDGE_CURVE('',#199600,#199609,#199611,.T.); +#199609 = VERTEX_POINT('',#199610); +#199610 = CARTESIAN_POINT('',(122.641361,-78.664206,1.585)); +#199611 = LINE('',#199612,#199613); +#199612 = CARTESIAN_POINT('',(121.909597,-78.663571,1.585)); +#199613 = VECTOR('',#199614,1.); +#199614 = DIRECTION('',(0.999999623491,-8.677657836479E-04,0.)); +#199615 = ORIENTED_EDGE('',*,*,#199616,.T.); +#199616 = EDGE_CURVE('',#199609,#199617,#199619,.T.); +#199617 = VERTEX_POINT('',#199618); +#199618 = CARTESIAN_POINT('',(122.667237,-78.670433,1.585)); +#199619 = LINE('',#199620,#199621); +#199620 = CARTESIAN_POINT('',(122.641361,-78.664206,1.585)); +#199621 = VECTOR('',#199622,1.); +#199622 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#199623 = ORIENTED_EDGE('',*,*,#199624,.T.); +#199624 = EDGE_CURVE('',#199617,#199625,#199627,.T.); +#199625 = VERTEX_POINT('',#199626); +#199626 = CARTESIAN_POINT('',(122.769843,-78.725466,1.585)); +#199627 = LINE('',#199628,#199629); +#199628 = CARTESIAN_POINT('',(122.667237,-78.670433,1.585)); +#199629 = VECTOR('',#199630,1.); +#199630 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#199631 = ORIENTED_EDGE('',*,*,#199632,.T.); +#199632 = EDGE_CURVE('',#199625,#199633,#199635,.T.); +#199633 = VERTEX_POINT('',#199634); +#199634 = CARTESIAN_POINT('',(122.824878,-78.785216,1.585)); +#199635 = LINE('',#199636,#199637); +#199636 = CARTESIAN_POINT('',(122.769843,-78.725466,1.585)); +#199637 = VECTOR('',#199638,1.); +#199638 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#199639 = ORIENTED_EDGE('',*,*,#199640,.T.); +#199640 = EDGE_CURVE('',#199633,#199641,#199643,.T.); +#199641 = VERTEX_POINT('',#199642); +#199642 = CARTESIAN_POINT('',(122.818491,-79.19444,1.585)); +#199643 = CIRCLE('',#199644,0.358409955812); +#199644 = AXIS2_PLACEMENT_3D('',#199645,#199646,#199647); +#199645 = CARTESIAN_POINT('',(122.52747311066,-78.98523606955,1.585)); +#199646 = DIRECTION('',(0.,0.,-1.)); +#199647 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#199648 = ORIENTED_EDGE('',*,*,#199649,.T.); +#199649 = EDGE_CURVE('',#199641,#199650,#199652,.T.); +#199650 = VERTEX_POINT('',#199651); +#199651 = CARTESIAN_POINT('',(122.761186,-79.251746,1.585)); +#199652 = LINE('',#199653,#199654); +#199653 = CARTESIAN_POINT('',(122.818491,-79.19444,1.585)); +#199654 = VECTOR('',#199655,1.); +#199655 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#199656 = ORIENTED_EDGE('',*,*,#199657,.T.); +#199657 = EDGE_CURVE('',#199650,#199658,#199660,.T.); +#199658 = VERTEX_POINT('',#199659); +#199659 = CARTESIAN_POINT('',(122.652824,-79.304941,1.585)); +#199660 = LINE('',#199661,#199662); +#199661 = CARTESIAN_POINT('',(122.761186,-79.251746,1.585)); +#199662 = VECTOR('',#199663,1.); +#199663 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#199664 = ORIENTED_EDGE('',*,*,#199665,.T.); +#199665 = EDGE_CURVE('',#199658,#199666,#199668,.T.); +#199666 = VERTEX_POINT('',#199667); +#199667 = CARTESIAN_POINT('',(121.909597,-79.307857,1.585)); +#199668 = LINE('',#199669,#199670); +#199669 = CARTESIAN_POINT('',(122.652824,-79.304941,1.585)); +#199670 = VECTOR('',#199671,1.); +#199671 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#199672 = ORIENTED_EDGE('',*,*,#199673,.T.); +#199673 = EDGE_CURVE('',#199666,#199674,#199676,.T.); +#199674 = VERTEX_POINT('',#199675); +#199675 = CARTESIAN_POINT('',(121.909597,-79.177857,1.585)); +#199676 = CIRCLE('',#199677,6.500000000091E-02); +#199677 = AXIS2_PLACEMENT_3D('',#199678,#199679,#199680); +#199678 = CARTESIAN_POINT('',(121.90959734486,-79.242857,1.585)); +#199679 = DIRECTION('',(0.,0.,-1.)); +#199680 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#199681 = ORIENTED_EDGE('',*,*,#199682,.T.); +#199682 = EDGE_CURVE('',#199674,#199683,#199685,.T.); +#199683 = VERTEX_POINT('',#199684); +#199684 = CARTESIAN_POINT('',(122.622823,-79.177857,1.585)); +#199685 = LINE('',#199686,#199687); +#199686 = CARTESIAN_POINT('',(121.909597,-79.177857,1.585)); +#199687 = VECTOR('',#199688,1.); +#199688 = DIRECTION('',(1.,0.,0.)); +#199689 = ORIENTED_EDGE('',*,*,#199690,.T.); +#199690 = EDGE_CURVE('',#199683,#199691,#199693,.T.); +#199691 = VERTEX_POINT('',#199692); +#199692 = CARTESIAN_POINT('',(122.744597,-79.056083,1.585)); +#199693 = CIRCLE('',#199694,0.170996196456); +#199694 = AXIS2_PLACEMENT_3D('',#199695,#199696,#199697); +#199695 = CARTESIAN_POINT('',(122.5792465,-79.0125065,1.585)); +#199696 = DIRECTION('',(0.,0.,1.)); +#199697 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#199698 = ORIENTED_EDGE('',*,*,#199699,.T.); +#199699 = EDGE_CURVE('',#199691,#199700,#199702,.T.); +#199700 = VERTEX_POINT('',#199701); +#199701 = CARTESIAN_POINT('',(122.744597,-78.915344,1.585)); +#199702 = LINE('',#199703,#199704); +#199703 = CARTESIAN_POINT('',(122.744597,-79.056083,1.585)); +#199704 = VECTOR('',#199705,1.); +#199705 = DIRECTION('',(0.,1.,0.)); +#199706 = ORIENTED_EDGE('',*,*,#199707,.T.); +#199707 = EDGE_CURVE('',#199700,#199708,#199710,.T.); +#199708 = VERTEX_POINT('',#199709); +#199709 = CARTESIAN_POINT('',(122.622823,-78.793571,1.585)); +#199710 = CIRCLE('',#199711,0.170997370267); +#199711 = AXIS2_PLACEMENT_3D('',#199712,#199713,#199714); +#199712 = CARTESIAN_POINT('',(122.57924582251,-78.95892253534,1.585)); +#199713 = DIRECTION('',(0.,0.,1.)); +#199714 = DIRECTION('',(0.966980820969,0.254849155144,-0.)); +#199715 = ORIENTED_EDGE('',*,*,#199716,.T.); +#199716 = EDGE_CURVE('',#199708,#199598,#199717,.T.); +#199717 = LINE('',#199718,#199719); +#199718 = CARTESIAN_POINT('',(122.622823,-78.793571,1.585)); +#199719 = VECTOR('',#199720,1.); +#199720 = DIRECTION('',(-1.,0.,0.)); +#199721 = PLANE('',#199722); +#199722 = AXIS2_PLACEMENT_3D('',#199723,#199724,#199725); +#199723 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199724 = DIRECTION('',(0.,0.,1.)); +#199725 = DIRECTION('',(1.,0.,-0.)); +#199726 = SHELL_BASED_SURFACE_MODEL('',(#199727)); +#199727 = OPEN_SHELL('',(#199728)); +#199728 = ADVANCED_FACE('',(#199729),#199831,.T.); +#199729 = FACE_BOUND('',#199730,.F.); +#199730 = EDGE_LOOP('',(#199731,#199742,#199750,#199758,#199767,#199775, + #199783,#199792,#199800,#199808,#199817,#199825)); +#199731 = ORIENTED_EDGE('',*,*,#199732,.T.); +#199732 = EDGE_CURVE('',#199733,#199735,#199737,.T.); +#199733 = VERTEX_POINT('',#199734); +#199734 = CARTESIAN_POINT('',(172.345917,-78.293542,1.585)); +#199735 = VERTEX_POINT('',#199736); +#199736 = CARTESIAN_POINT('',(172.454083,-78.365653,1.585)); +#199737 = CIRCLE('',#199738,6.499976899535E-02); +#199738 = AXIS2_PLACEMENT_3D('',#199739,#199740,#199741); +#199739 = CARTESIAN_POINT('',(172.39999975277,-78.32959787083,1.585)); +#199740 = DIRECTION('',(0.,0.,-1.)); +#199741 = DIRECTION('',(-0.83204530747,0.554707676455,0.)); +#199742 = ORIENTED_EDGE('',*,*,#199743,.T.); +#199743 = EDGE_CURVE('',#199735,#199744,#199746,.T.); +#199744 = VERTEX_POINT('',#199745); +#199745 = CARTESIAN_POINT('',(172.17812,-78.779597,1.585)); +#199746 = LINE('',#199747,#199748); +#199747 = CARTESIAN_POINT('',(172.454083,-78.365653,1.585)); +#199748 = VECTOR('',#199749,1.); +#199749 = DIRECTION('',(-0.554700660084,-0.832049985099,0.)); +#199750 = ORIENTED_EDGE('',*,*,#199751,.T.); +#199751 = EDGE_CURVE('',#199744,#199752,#199754,.T.); +#199752 = VERTEX_POINT('',#199753); +#199753 = CARTESIAN_POINT('',(172.454083,-79.193541,1.585)); +#199754 = LINE('',#199755,#199756); +#199755 = CARTESIAN_POINT('',(172.17812,-78.779597,1.585)); +#199756 = VECTOR('',#199757,1.); +#199757 = DIRECTION('',(0.554700660084,-0.832049985099,0.)); +#199758 = ORIENTED_EDGE('',*,*,#199759,.T.); +#199759 = EDGE_CURVE('',#199752,#199760,#199762,.T.); +#199760 = VERTEX_POINT('',#199761); +#199761 = CARTESIAN_POINT('',(172.345917,-79.265652,1.585)); +#199762 = CIRCLE('',#199763,6.499976899535E-02); +#199763 = AXIS2_PLACEMENT_3D('',#199764,#199765,#199766); +#199764 = CARTESIAN_POINT('',(172.39999975277,-79.22959612917,1.585)); +#199765 = DIRECTION('',(0.,0.,-1.)); +#199766 = DIRECTION('',(0.832052914291,0.554696266276,0.)); +#199767 = ORIENTED_EDGE('',*,*,#199768,.T.); +#199768 = EDGE_CURVE('',#199760,#199769,#199771,.T.); +#199769 = VERTEX_POINT('',#199770); +#199770 = CARTESIAN_POINT('',(172.1,-78.896777,1.585)); +#199771 = LINE('',#199772,#199773); +#199772 = CARTESIAN_POINT('',(172.345917,-79.265652,1.585)); +#199773 = VECTOR('',#199774,1.); +#199774 = DIRECTION('',(-0.554700716758,0.832049947316,0.)); +#199775 = ORIENTED_EDGE('',*,*,#199776,.T.); +#199776 = EDGE_CURVE('',#199769,#199777,#199779,.T.); +#199777 = VERTEX_POINT('',#199778); +#199778 = CARTESIAN_POINT('',(171.854083,-79.265653,1.585)); +#199779 = LINE('',#199780,#199781); +#199780 = CARTESIAN_POINT('',(172.1,-78.896777,1.585)); +#199781 = VECTOR('',#199782,1.); +#199782 = DIRECTION('',(-0.554699675693,-0.832050641359,0.)); +#199783 = ORIENTED_EDGE('',*,*,#199784,.T.); +#199784 = EDGE_CURVE('',#199777,#199785,#199787,.T.); +#199785 = VERTEX_POINT('',#199786); +#199786 = CARTESIAN_POINT('',(171.745917,-79.193541,1.585)); +#199787 = CIRCLE('',#199788,6.500004634724E-02); +#199788 = AXIS2_PLACEMENT_3D('',#199789,#199790,#199791); +#199789 = CARTESIAN_POINT('',(171.80000020937,-79.22959668594,1.585)); +#199790 = DIRECTION('',(-0.,0.,-1.)); +#199791 = DIRECTION('',(0.832042339427,-0.554712128406,-0.)); +#199792 = ORIENTED_EDGE('',*,*,#199793,.T.); +#199793 = EDGE_CURVE('',#199785,#199794,#199796,.T.); +#199794 = VERTEX_POINT('',#199795); +#199795 = CARTESIAN_POINT('',(172.021879,-78.779597,1.585)); +#199796 = LINE('',#199797,#199798); +#199797 = CARTESIAN_POINT('',(171.745917,-79.193541,1.585)); +#199798 = VECTOR('',#199799,1.); +#199799 = DIRECTION('',(0.554699268506,0.832050912816,0.)); +#199800 = ORIENTED_EDGE('',*,*,#199801,.T.); +#199801 = EDGE_CURVE('',#199794,#199802,#199804,.T.); +#199802 = VERTEX_POINT('',#199803); +#199803 = CARTESIAN_POINT('',(171.745917,-78.365653,1.585)); +#199804 = LINE('',#199805,#199806); +#199805 = CARTESIAN_POINT('',(172.021879,-78.779597,1.585)); +#199806 = VECTOR('',#199807,1.); +#199807 = DIRECTION('',(-0.554699268506,0.832050912816,0.)); +#199808 = ORIENTED_EDGE('',*,*,#199809,.T.); +#199809 = EDGE_CURVE('',#199802,#199810,#199812,.T.); +#199810 = VERTEX_POINT('',#199811); +#199811 = CARTESIAN_POINT('',(171.854083,-78.293541,1.585)); +#199812 = CIRCLE('',#199813,6.500004634766E-02); +#199813 = AXIS2_PLACEMENT_3D('',#199814,#199815,#199816); +#199814 = CARTESIAN_POINT('',(171.80000024669,-78.32959737004,1.585)); +#199815 = DIRECTION('',(0.,0.,-1.)); +#199816 = DIRECTION('',(-0.832049355929,-0.554701603836,-0.)); +#199817 = ORIENTED_EDGE('',*,*,#199818,.T.); +#199818 = EDGE_CURVE('',#199810,#199819,#199821,.T.); +#199819 = VERTEX_POINT('',#199820); +#199820 = CARTESIAN_POINT('',(172.1,-78.662416,1.585)); +#199821 = LINE('',#199822,#199823); +#199822 = CARTESIAN_POINT('',(171.854083,-78.293541,1.585)); +#199823 = VECTOR('',#199824,1.); +#199824 = DIRECTION('',(0.554700716758,-0.832049947316,0.)); +#199825 = ORIENTED_EDGE('',*,*,#199826,.T.); +#199826 = EDGE_CURVE('',#199819,#199733,#199827,.T.); +#199827 = LINE('',#199828,#199829); +#199828 = CARTESIAN_POINT('',(172.1,-78.662416,1.585)); +#199829 = VECTOR('',#199830,1.); +#199830 = DIRECTION('',(0.554701757825,0.832049253269,0.)); +#199831 = PLANE('',#199832); +#199832 = AXIS2_PLACEMENT_3D('',#199833,#199834,#199835); +#199833 = CARTESIAN_POINT('',(0.,0.,1.585)); +#199834 = DIRECTION('',(0.,0.,1.)); +#199835 = DIRECTION('',(1.,0.,-0.)); +#199836 = SHELL_BASED_SURFACE_MODEL('',(#199837)); +#199837 = OPEN_SHELL('',(#199838)); +#199838 = ADVANCED_FACE('',(#199839,#199973),#200025,.T.); +#199839 = FACE_BOUND('',#199840,.F.); +#199840 = EDGE_LOOP('',(#199841,#199852,#199860,#199868,#199876,#199885, + #199893,#199901,#199909,#199917,#199925,#199934,#199942,#199950, + #199958,#199967)); +#199841 = ORIENTED_EDGE('',*,*,#199842,.T.); +#199842 = EDGE_CURVE('',#199843,#199845,#199847,.T.); +#199843 = VERTEX_POINT('',#199844); +#199844 = CARTESIAN_POINT('',(170.920714,-78.329597,1.585)); +#199845 = VERTEX_POINT('',#199846); +#199846 = CARTESIAN_POINT('',(170.985714,-78.264597,1.585)); +#199847 = CIRCLE('',#199848,6.500103935386E-02); +#199848 = AXIS2_PLACEMENT_3D('',#199849,#199850,#199851); +#199849 = CARTESIAN_POINT('',(170.98571503934,-78.32959803934,1.585)); +#199850 = DIRECTION('',(0.,0.,-1.)); +#199851 = DIRECTION('',(-0.999999999872,1.598967539908E-05,0.)); +#199852 = ORIENTED_EDGE('',*,*,#199853,.T.); +#199853 = EDGE_CURVE('',#199845,#199854,#199856,.T.); +#199854 = VERTEX_POINT('',#199855); +#199855 = CARTESIAN_POINT('',(171.331764,-78.265232,1.585)); +#199856 = LINE('',#199857,#199858); +#199857 = CARTESIAN_POINT('',(170.985714,-78.264597,1.585)); +#199858 = VECTOR('',#199859,1.); +#199859 = DIRECTION('',(0.999998316401,-1.834991853539E-03,0.)); +#199860 = ORIENTED_EDGE('',*,*,#199861,.T.); +#199861 = EDGE_CURVE('',#199854,#199862,#199864,.T.); +#199862 = VERTEX_POINT('',#199863); +#199863 = CARTESIAN_POINT('',(171.35764,-78.271459,1.585)); +#199864 = LINE('',#199865,#199866); +#199865 = CARTESIAN_POINT('',(171.331764,-78.265232,1.585)); +#199866 = VECTOR('',#199867,1.); +#199867 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#199868 = ORIENTED_EDGE('',*,*,#199869,.T.); +#199869 = EDGE_CURVE('',#199862,#199870,#199872,.T.); +#199870 = VERTEX_POINT('',#199871); +#199871 = CARTESIAN_POINT('',(171.460248,-78.326492,1.585)); +#199872 = LINE('',#199873,#199874); +#199873 = CARTESIAN_POINT('',(171.35764,-78.271459,1.585)); +#199874 = VECTOR('',#199875,1.); +#199875 = DIRECTION('',(0.881249533158,-0.472651309433,0.)); +#199876 = ORIENTED_EDGE('',*,*,#199877,.T.); +#199877 = EDGE_CURVE('',#199870,#199878,#199880,.T.); +#199878 = VERTEX_POINT('',#199879); +#199879 = CARTESIAN_POINT('',(171.562084,-78.644253,1.585)); +#199880 = CIRCLE('',#199881,0.311668456374); +#199881 = AXIS2_PLACEMENT_3D('',#199882,#199883,#199884); +#199882 = CARTESIAN_POINT('',(171.26047346242,-78.56571440872,1.585)); +#199883 = DIRECTION('',(0.,0.,-1.)); +#199884 = DIRECTION('',(0.640984140334,0.767554123069,0.)); +#199885 = ORIENTED_EDGE('',*,*,#199886,.T.); +#199886 = EDGE_CURVE('',#199878,#199887,#199889,.T.); +#199887 = VERTEX_POINT('',#199888); +#199888 = CARTESIAN_POINT('',(171.508894,-78.752608,1.585)); +#199889 = LINE('',#199890,#199891); +#199890 = CARTESIAN_POINT('',(171.562084,-78.644253,1.585)); +#199891 = VECTOR('',#199892,1.); +#199892 = DIRECTION('',(-0.440656804576,-0.897675654444,0.)); +#199893 = ORIENTED_EDGE('',*,*,#199894,.T.); +#199894 = EDGE_CURVE('',#199887,#199895,#199897,.T.); +#199895 = VERTEX_POINT('',#199896); +#199896 = CARTESIAN_POINT('',(171.451583,-78.809919,1.585)); +#199897 = LINE('',#199898,#199899); +#199898 = CARTESIAN_POINT('',(171.508894,-78.752608,1.585)); +#199899 = VECTOR('',#199900,1.); +#199900 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#199901 = ORIENTED_EDGE('',*,*,#199902,.T.); +#199902 = EDGE_CURVE('',#199895,#199903,#199905,.T.); +#199903 = VERTEX_POINT('',#199904); +#199904 = CARTESIAN_POINT('',(171.343227,-78.863109,1.585)); +#199905 = LINE('',#199906,#199907); +#199906 = CARTESIAN_POINT('',(171.451583,-78.809919,1.585)); +#199907 = VECTOR('',#199908,1.); +#199908 = DIRECTION('',(-0.897677263112,-0.440653527492,0.)); +#199909 = ORIENTED_EDGE('',*,*,#199910,.T.); +#199910 = EDGE_CURVE('',#199903,#199911,#199913,.T.); +#199911 = VERTEX_POINT('',#199912); +#199912 = CARTESIAN_POINT('',(171.324842,-78.866025,1.585)); +#199913 = LINE('',#199914,#199915); +#199914 = CARTESIAN_POINT('',(171.343227,-78.863109,1.585)); +#199915 = VECTOR('',#199916,1.); +#199916 = DIRECTION('',(-0.987654268842,-0.156649434209,0.)); +#199917 = ORIENTED_EDGE('',*,*,#199918,.T.); +#199918 = EDGE_CURVE('',#199911,#199919,#199921,.T.); +#199919 = VERTEX_POINT('',#199920); +#199920 = CARTESIAN_POINT('',(171.55325,-79.192322,1.585)); +#199921 = LINE('',#199922,#199923); +#199922 = CARTESIAN_POINT('',(171.324842,-78.866025,1.585)); +#199923 = VECTOR('',#199924,1.); +#199924 = DIRECTION('',(0.573462512866,-0.819231802567,0.)); +#199925 = ORIENTED_EDGE('',*,*,#199926,.T.); +#199926 = EDGE_CURVE('',#199919,#199927,#199929,.T.); +#199927 = VERTEX_POINT('',#199928); +#199928 = CARTESIAN_POINT('',(171.44675,-79.266872,1.585)); +#199929 = CIRCLE('',#199930,6.499990865383E-02); +#199930 = AXIS2_PLACEMENT_3D('',#199931,#199932,#199933); +#199931 = CARTESIAN_POINT('',(171.50000005055,-79.22959707222,1.585)); +#199932 = DIRECTION('',(0.,0.,-1.)); +#199933 = DIRECTION('',(0.819231142687,0.573463455551,0.)); +#199934 = ORIENTED_EDGE('',*,*,#199935,.T.); +#199935 = EDGE_CURVE('',#199927,#199936,#199938,.T.); +#199936 = VERTEX_POINT('',#199937); +#199937 = CARTESIAN_POINT('',(171.166157,-78.866025,1.585)); +#199938 = LINE('',#199939,#199940); +#199939 = CARTESIAN_POINT('',(171.44675,-79.266872,1.585)); +#199940 = VECTOR('',#199941,1.); +#199941 = DIRECTION('',(-0.573462481528,0.819231824504,0.)); +#199942 = ORIENTED_EDGE('',*,*,#199943,.T.); +#199943 = EDGE_CURVE('',#199936,#199944,#199946,.T.); +#199944 = VERTEX_POINT('',#199945); +#199945 = CARTESIAN_POINT('',(171.050714,-78.866025,1.585)); +#199946 = LINE('',#199947,#199948); +#199947 = CARTESIAN_POINT('',(171.166157,-78.866025,1.585)); +#199948 = VECTOR('',#199949,1.); +#199949 = DIRECTION('',(-1.,0.,0.)); +#199950 = ORIENTED_EDGE('',*,*,#199951,.T.); +#199951 = EDGE_CURVE('',#199944,#199952,#199954,.T.); +#199952 = VERTEX_POINT('',#199953); +#199953 = CARTESIAN_POINT('',(171.050714,-79.229597,1.585)); +#199954 = LINE('',#199955,#199956); +#199955 = CARTESIAN_POINT('',(171.050714,-78.866025,1.585)); +#199956 = VECTOR('',#199957,1.); +#199957 = DIRECTION('',(0.,-1.,0.)); +#199958 = ORIENTED_EDGE('',*,*,#199959,.T.); +#199959 = EDGE_CURVE('',#199952,#199960,#199962,.T.); +#199960 = VERTEX_POINT('',#199961); +#199961 = CARTESIAN_POINT('',(170.920714,-79.229597,1.585)); +#199962 = CIRCLE('',#199963,6.500000000091E-02); +#199963 = AXIS2_PLACEMENT_3D('',#199964,#199965,#199966); +#199964 = CARTESIAN_POINT('',(170.985714,-79.22959665513,1.585)); +#199965 = DIRECTION('',(-0.,0.,-1.)); +#199966 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#199967 = ORIENTED_EDGE('',*,*,#199968,.T.); +#199968 = EDGE_CURVE('',#199960,#199843,#199969,.T.); +#199969 = LINE('',#199970,#199971); +#199970 = CARTESIAN_POINT('',(170.920714,-79.229597,1.585)); +#199971 = VECTOR('',#199972,1.); +#199972 = DIRECTION('',(0.,1.,0.)); +#199973 = FACE_BOUND('',#199974,.F.); +#199974 = EDGE_LOOP('',(#199975,#199986,#199994,#200002,#200010,#200019) + ); +#199975 = ORIENTED_EDGE('',*,*,#199976,.T.); +#199976 = EDGE_CURVE('',#199977,#199979,#199981,.T.); +#199977 = VERTEX_POINT('',#199978); +#199978 = CARTESIAN_POINT('',(171.435,-78.51637,1.585)); +#199979 = VERTEX_POINT('',#199980); +#199980 = CARTESIAN_POINT('',(171.313226,-78.394597,1.585)); +#199981 = CIRCLE('',#199982,0.170996278941); +#199982 = AXIS2_PLACEMENT_3D('',#199983,#199984,#199985); +#199983 = CARTESIAN_POINT('',(171.2696497157,-78.55994764214,1.585)); +#199984 = DIRECTION('',(0.,0.,1.)); +#199985 = DIRECTION('',(0.966981768956,0.254845558146,-0.)); +#199986 = ORIENTED_EDGE('',*,*,#199987,.T.); +#199987 = EDGE_CURVE('',#199979,#199988,#199990,.T.); +#199988 = VERTEX_POINT('',#199989); +#199989 = CARTESIAN_POINT('',(171.050714,-78.394597,1.585)); +#199990 = LINE('',#199991,#199992); +#199991 = CARTESIAN_POINT('',(171.313226,-78.394597,1.585)); +#199992 = VECTOR('',#199993,1.); +#199993 = DIRECTION('',(-1.,0.,0.)); +#199994 = ORIENTED_EDGE('',*,*,#199995,.T.); +#199995 = EDGE_CURVE('',#199988,#199996,#199998,.T.); +#199996 = VERTEX_POINT('',#199997); +#199997 = CARTESIAN_POINT('',(171.050714,-78.736025,1.585)); +#199998 = LINE('',#199999,#200000); +#199999 = CARTESIAN_POINT('',(171.050714,-78.394597,1.585)); +#200000 = VECTOR('',#200001,1.); +#200001 = DIRECTION('',(0.,-1.,0.)); +#200002 = ORIENTED_EDGE('',*,*,#200003,.T.); +#200003 = EDGE_CURVE('',#199996,#200004,#200006,.T.); +#200004 = VERTEX_POINT('',#200005); +#200005 = CARTESIAN_POINT('',(171.313226,-78.736025,1.585)); +#200006 = LINE('',#200007,#200008); +#200007 = CARTESIAN_POINT('',(171.050714,-78.736025,1.585)); +#200008 = VECTOR('',#200009,1.); +#200009 = DIRECTION('',(1.,0.,0.)); +#200010 = ORIENTED_EDGE('',*,*,#200011,.T.); +#200011 = EDGE_CURVE('',#200004,#200012,#200014,.T.); +#200012 = VERTEX_POINT('',#200013); +#200013 = CARTESIAN_POINT('',(171.435,-78.614252,1.585)); +#200014 = CIRCLE('',#200015,0.171001125777); +#200015 = AXIS2_PLACEMENT_3D('',#200016,#200017,#200018); +#200016 = CARTESIAN_POINT('',(171.26964574885,-78.57067039097,1.585)); +#200017 = DIRECTION('',(0.,0.,1.)); +#200018 = DIRECTION('',(0.254853592022,-0.966979651613,0.)); +#200019 = ORIENTED_EDGE('',*,*,#200020,.T.); +#200020 = EDGE_CURVE('',#200012,#199977,#200021,.T.); +#200021 = LINE('',#200022,#200023); +#200022 = CARTESIAN_POINT('',(171.435,-78.614252,1.585)); +#200023 = VECTOR('',#200024,1.); +#200024 = DIRECTION('',(0.,1.,0.)); +#200025 = PLANE('',#200026); +#200026 = AXIS2_PLACEMENT_3D('',#200027,#200028,#200029); +#200027 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200028 = DIRECTION('',(0.,0.,1.)); +#200029 = DIRECTION('',(1.,0.,-0.)); +#200030 = SHELL_BASED_SURFACE_MODEL('',(#200031)); +#200031 = OPEN_SHELL('',(#200032)); +#200032 = ADVANCED_FACE('',(#200033,#200118),#200144,.T.); +#200033 = FACE_BOUND('',#200034,.F.); +#200034 = EDGE_LOOP('',(#200035,#200046,#200054,#200062,#200071,#200079, + #200087,#200095,#200104,#200112)); +#200035 = ORIENTED_EDGE('',*,*,#200036,.T.); +#200036 = EDGE_CURVE('',#200037,#200039,#200041,.T.); +#200037 = VERTEX_POINT('',#200038); +#200038 = CARTESIAN_POINT('',(184.979983,-78.704936,1.585)); +#200039 = VERTEX_POINT('',#200040); +#200040 = CARTESIAN_POINT('',(184.9835,-78.577085,1.585)); +#200041 = CIRCLE('',#200042,0.105824997037); +#200042 = AXIS2_PLACEMENT_3D('',#200043,#200044,#200045); +#200043 = CARTESIAN_POINT('',(185.06602668479,-78.6433290661,1.585)); +#200044 = DIRECTION('',(0.,0.,-1.)); +#200045 = DIRECTION('',(-0.813075239388,-0.582158616783,-0.)); +#200046 = ORIENTED_EDGE('',*,*,#200047,.T.); +#200047 = EDGE_CURVE('',#200039,#200048,#200050,.T.); +#200048 = VERTEX_POINT('',#200049); +#200049 = CARTESIAN_POINT('',(185.015925,-78.548965,1.585)); +#200050 = LINE('',#200051,#200052); +#200051 = CARTESIAN_POINT('',(184.9835,-78.577085,1.585)); +#200052 = VECTOR('',#200053,1.); +#200053 = DIRECTION('',(0.755477635403,0.655174436624,0.)); +#200054 = ORIENTED_EDGE('',*,*,#200055,.T.); +#200055 = EDGE_CURVE('',#200048,#200056,#200058,.T.); +#200056 = VERTEX_POINT('',#200057); +#200057 = CARTESIAN_POINT('',(186.656642,-78.002059,1.585)); +#200058 = LINE('',#200059,#200060); +#200059 = CARTESIAN_POINT('',(185.015925,-78.548965,1.585)); +#200060 = VECTOR('',#200061,1.); +#200061 = DIRECTION('',(0.948683240229,0.316227939481,0.)); +#200062 = ORIENTED_EDGE('',*,*,#200063,.T.); +#200063 = EDGE_CURVE('',#200056,#200064,#200066,.T.); +#200064 = VERTEX_POINT('',#200065); +#200065 = CARTESIAN_POINT('',(186.724875,-78.206758,1.585)); +#200066 = CIRCLE('',#200067,0.109999550634); +#200067 = AXIS2_PLACEMENT_3D('',#200068,#200069,#200070); +#200068 = CARTESIAN_POINT('',(186.67039945101,-78.11119484966,1.585)); +#200069 = DIRECTION('',(0.,0.,-1.)); +#200070 = DIRECTION('',(-0.125068247445,0.992148140895,-0.)); +#200071 = ORIENTED_EDGE('',*,*,#200072,.T.); +#200072 = EDGE_CURVE('',#200064,#200073,#200075,.T.); +#200073 = VERTEX_POINT('',#200074); +#200074 = CARTESIAN_POINT('',(186.323257,-78.342859,1.585)); +#200075 = LINE('',#200076,#200077); +#200076 = CARTESIAN_POINT('',(186.724875,-78.206758,1.585)); +#200077 = VECTOR('',#200078,1.); +#200078 = DIRECTION('',(-0.947095053732,-0.32095320406,0.)); +#200079 = ORIENTED_EDGE('',*,*,#200080,.T.); +#200080 = EDGE_CURVE('',#200073,#200081,#200083,.T.); +#200081 = VERTEX_POINT('',#200082); +#200082 = CARTESIAN_POINT('',(186.323257,-78.946197,1.585)); +#200083 = LINE('',#200084,#200085); +#200084 = CARTESIAN_POINT('',(186.323257,-78.342859,1.585)); +#200085 = VECTOR('',#200086,1.); +#200086 = DIRECTION('',(0.,-1.,0.)); +#200087 = ORIENTED_EDGE('',*,*,#200088,.T.); +#200088 = EDGE_CURVE('',#200081,#200089,#200091,.T.); +#200089 = VERTEX_POINT('',#200090); +#200090 = CARTESIAN_POINT('',(186.724875,-79.082299,1.585)); +#200091 = LINE('',#200092,#200093); +#200092 = CARTESIAN_POINT('',(186.323257,-78.946197,1.585)); +#200093 = VECTOR('',#200094,1.); +#200094 = DIRECTION('',(0.947094336901,-0.320955319336,0.)); +#200095 = ORIENTED_EDGE('',*,*,#200096,.T.); +#200096 = EDGE_CURVE('',#200089,#200097,#200099,.T.); +#200097 = VERTEX_POINT('',#200098); +#200098 = CARTESIAN_POINT('',(186.656642,-79.286998,1.585)); +#200099 = CIRCLE('',#200100,0.109999365974); +#200100 = AXIS2_PLACEMENT_3D('',#200101,#200102,#200103); +#200101 = CARTESIAN_POINT('',(186.67040034898,-79.17786244966,1.585)); +#200102 = DIRECTION('',(0.,0.,-1.)); +#200103 = DIRECTION('',(0.495226954596,0.868763640723,0.)); +#200104 = ORIENTED_EDGE('',*,*,#200105,.T.); +#200105 = EDGE_CURVE('',#200097,#200106,#200108,.T.); +#200106 = VERTEX_POINT('',#200107); +#200107 = CARTESIAN_POINT('',(185.015925,-78.740091,1.585)); +#200108 = LINE('',#200109,#200110); +#200109 = CARTESIAN_POINT('',(186.656642,-79.286998,1.585)); +#200110 = VECTOR('',#200111,1.); +#200111 = DIRECTION('',(-0.948683066765,0.316228459872,0.)); +#200112 = ORIENTED_EDGE('',*,*,#200113,.T.); +#200113 = EDGE_CURVE('',#200106,#200037,#200114,.T.); +#200114 = LINE('',#200115,#200116); +#200115 = CARTESIAN_POINT('',(185.015925,-78.740091,1.585)); +#200116 = VECTOR('',#200117,1.); +#200117 = DIRECTION('',(-0.714890220874,0.699236706773,0.)); +#200118 = FACE_BOUND('',#200119,.F.); +#200119 = EDGE_LOOP('',(#200120,#200130,#200138)); +#200120 = ORIENTED_EDGE('',*,*,#200121,.T.); +#200121 = EDGE_CURVE('',#200122,#200124,#200126,.T.); +#200122 = VERTEX_POINT('',#200123); +#200123 = CARTESIAN_POINT('',(185.418249,-78.644528,1.585)); +#200124 = VERTEX_POINT('',#200125); +#200125 = CARTESIAN_POINT('',(186.103257,-78.872864,1.585)); +#200126 = LINE('',#200127,#200128); +#200127 = CARTESIAN_POINT('',(185.418249,-78.644528,1.585)); +#200128 = VECTOR('',#200129,1.); +#200129 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#200130 = ORIENTED_EDGE('',*,*,#200131,.T.); +#200131 = EDGE_CURVE('',#200124,#200132,#200134,.T.); +#200132 = VERTEX_POINT('',#200133); +#200133 = CARTESIAN_POINT('',(186.103257,-78.416192,1.585)); +#200134 = LINE('',#200135,#200136); +#200135 = CARTESIAN_POINT('',(186.103257,-78.872864,1.585)); +#200136 = VECTOR('',#200137,1.); +#200137 = DIRECTION('',(0.,1.,0.)); +#200138 = ORIENTED_EDGE('',*,*,#200139,.T.); +#200139 = EDGE_CURVE('',#200132,#200122,#200140,.T.); +#200140 = LINE('',#200141,#200142); +#200141 = CARTESIAN_POINT('',(186.103257,-78.416192,1.585)); +#200142 = VECTOR('',#200143,1.); +#200143 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#200144 = PLANE('',#200145); +#200145 = AXIS2_PLACEMENT_3D('',#200146,#200147,#200148); +#200146 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200147 = DIRECTION('',(0.,0.,1.)); +#200148 = DIRECTION('',(1.,0.,-0.)); +#200149 = SHELL_BASED_SURFACE_MODEL('',(#200150)); +#200150 = OPEN_SHELL('',(#200151)); +#200151 = ADVANCED_FACE('',(#200152),#200196,.T.); +#200152 = FACE_BOUND('',#200153,.F.); +#200153 = EDGE_LOOP('',(#200154,#200165,#200173,#200182,#200190)); +#200154 = ORIENTED_EDGE('',*,*,#200155,.T.); +#200155 = EDGE_CURVE('',#200156,#200158,#200160,.T.); +#200156 = VERTEX_POINT('',#200157); +#200157 = CARTESIAN_POINT('',(128.956688,-78.389412,1.585)); +#200158 = VERTEX_POINT('',#200159); +#200159 = CARTESIAN_POINT('',(129.08174,-78.414286,1.585)); +#200160 = CIRCLE('',#200161,6.499988811648E-02); +#200161 = AXIS2_PLACEMENT_3D('',#200162,#200163,#200164); +#200162 = CARTESIAN_POINT('',(129.01674011188,-78.4142862701,1.585)); +#200163 = DIRECTION('',(0.,0.,-1.)); +#200164 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#200165 = ORIENTED_EDGE('',*,*,#200166,.T.); +#200166 = EDGE_CURVE('',#200158,#200167,#200169,.T.); +#200167 = VERTEX_POINT('',#200168); +#200168 = CARTESIAN_POINT('',(129.08174,-79.1,1.585)); +#200169 = LINE('',#200170,#200171); +#200170 = CARTESIAN_POINT('',(129.08174,-78.414286,1.585)); +#200171 = VECTOR('',#200172,1.); +#200172 = DIRECTION('',(0.,-1.,0.)); +#200173 = ORIENTED_EDGE('',*,*,#200174,.T.); +#200174 = EDGE_CURVE('',#200167,#200175,#200177,.T.); +#200175 = VERTEX_POINT('',#200176); +#200176 = CARTESIAN_POINT('',(128.95174,-79.1,1.585)); +#200177 = CIRCLE('',#200178,6.500000000092E-02); +#200178 = AXIS2_PLACEMENT_3D('',#200179,#200180,#200181); +#200179 = CARTESIAN_POINT('',(129.01674,-79.09999965513,1.585)); +#200180 = DIRECTION('',(-0.,0.,-1.)); +#200181 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#200182 = ORIENTED_EDGE('',*,*,#200183,.T.); +#200183 = EDGE_CURVE('',#200175,#200184,#200186,.T.); +#200184 = VERTEX_POINT('',#200185); +#200185 = CARTESIAN_POINT('',(128.95174,-78.414286,1.585)); +#200186 = LINE('',#200187,#200188); +#200187 = CARTESIAN_POINT('',(128.95174,-79.1,1.585)); +#200188 = VECTOR('',#200189,1.); +#200189 = DIRECTION('',(0.,1.,0.)); +#200190 = ORIENTED_EDGE('',*,*,#200191,.T.); +#200191 = EDGE_CURVE('',#200184,#200156,#200192,.T.); +#200192 = LINE('',#200193,#200194); +#200193 = CARTESIAN_POINT('',(128.95174,-78.414286,1.585)); +#200194 = VECTOR('',#200195,1.); +#200195 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#200196 = PLANE('',#200197); +#200197 = AXIS2_PLACEMENT_3D('',#200198,#200199,#200200); +#200198 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200199 = DIRECTION('',(0.,0.,1.)); +#200200 = DIRECTION('',(1.,0.,-0.)); +#200201 = SHELL_BASED_SURFACE_MODEL('',(#200202)); +#200202 = OPEN_SHELL('',(#200203)); +#200203 = ADVANCED_FACE('',(#200204),#200338,.T.); +#200204 = FACE_BOUND('',#200205,.F.); +#200205 = EDGE_LOOP('',(#200206,#200217,#200225,#200234,#200242,#200250, + #200258,#200266,#200275,#200283,#200291,#200299,#200308,#200316, + #200324,#200332)); +#200206 = ORIENTED_EDGE('',*,*,#200207,.T.); +#200207 = EDGE_CURVE('',#200208,#200210,#200212,.T.); +#200208 = VERTEX_POINT('',#200209); +#200209 = CARTESIAN_POINT('',(207.029801,-78.451216,1.585)); +#200210 = VERTEX_POINT('',#200211); +#200211 = CARTESIAN_POINT('',(207.146469,-78.513576,1.585)); +#200212 = CIRCLE('',#200213,7.500000000003E-02); +#200213 = AXIS2_PLACEMENT_3D('',#200214,#200215,#200216); +#200214 = CARTESIAN_POINT('',(207.071469,-78.51357606555,1.585)); +#200215 = DIRECTION('',(0.,0.,-1.)); +#200216 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#200217 = ORIENTED_EDGE('',*,*,#200218,.T.); +#200218 = EDGE_CURVE('',#200210,#200219,#200221,.T.); +#200219 = VERTEX_POINT('',#200220); +#200220 = CARTESIAN_POINT('',(207.145028,-79.099636,1.585)); +#200221 = LINE('',#200222,#200223); +#200222 = CARTESIAN_POINT('',(207.146469,-78.513576,1.585)); +#200223 = VECTOR('',#200224,1.); +#200224 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#200225 = ORIENTED_EDGE('',*,*,#200226,.T.); +#200226 = EDGE_CURVE('',#200219,#200227,#200229,.T.); +#200227 = VERTEX_POINT('',#200228); +#200228 = CARTESIAN_POINT('',(206.996469,-79.085004,1.585)); +#200229 = CIRCLE('',#200230,7.500006711464E-02); +#200230 = AXIS2_PLACEMENT_3D('',#200231,#200232,#200233); +#200231 = CARTESIAN_POINT('',(207.07146906711,-79.08500406711,1.585)); +#200232 = DIRECTION('',(-0.,0.,-1.)); +#200233 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#200234 = ORIENTED_EDGE('',*,*,#200235,.T.); +#200235 = EDGE_CURVE('',#200227,#200236,#200238,.T.); +#200236 = VERTEX_POINT('',#200237); +#200237 = CARTESIAN_POINT('',(206.996469,-78.87429,1.585)); +#200238 = LINE('',#200239,#200240); +#200239 = CARTESIAN_POINT('',(206.996469,-79.085004,1.585)); +#200240 = VECTOR('',#200241,1.); +#200241 = DIRECTION('',(0.,1.,0.)); +#200242 = ORIENTED_EDGE('',*,*,#200243,.T.); +#200243 = EDGE_CURVE('',#200236,#200244,#200246,.T.); +#200244 = VERTEX_POINT('',#200245); +#200245 = CARTESIAN_POINT('',(206.300154,-78.87429,1.585)); +#200246 = LINE('',#200247,#200248); +#200247 = CARTESIAN_POINT('',(206.996469,-78.87429,1.585)); +#200248 = VECTOR('',#200249,1.); +#200249 = DIRECTION('',(-1.,0.,0.)); +#200250 = ORIENTED_EDGE('',*,*,#200251,.T.); +#200251 = EDGE_CURVE('',#200244,#200252,#200254,.T.); +#200252 = VERTEX_POINT('',#200253); +#200253 = CARTESIAN_POINT('',(206.372683,-78.94993,1.585)); +#200254 = LINE('',#200255,#200256); +#200255 = CARTESIAN_POINT('',(206.300154,-78.87429,1.585)); +#200256 = VECTOR('',#200257,1.); +#200257 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#200258 = ORIENTED_EDGE('',*,*,#200259,.T.); +#200259 = EDGE_CURVE('',#200252,#200260,#200262,.T.); +#200260 = VERTEX_POINT('',#200261); +#200261 = CARTESIAN_POINT('',(206.42952,-79.065194,1.585)); +#200262 = LINE('',#200263,#200264); +#200263 = CARTESIAN_POINT('',(206.372683,-78.94993,1.585)); +#200264 = VECTOR('',#200265,1.); +#200265 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#200266 = ORIENTED_EDGE('',*,*,#200267,.T.); +#200267 = EDGE_CURVE('',#200260,#200268,#200270,.T.); +#200268 = VERTEX_POINT('',#200269); +#200269 = CARTESIAN_POINT('',(206.290101,-79.118545,1.585)); +#200270 = CIRCLE('',#200271,7.500029440469E-02); +#200271 = AXIS2_PLACEMENT_3D('',#200272,#200273,#200274); +#200272 = CARTESIAN_POINT('',(206.35718305397,-79.08500335132,1.585)); +#200273 = DIRECTION('',(0.,0.,-1.)); +#200274 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#200275 = ORIENTED_EDGE('',*,*,#200276,.T.); +#200276 = EDGE_CURVE('',#200268,#200277,#200279,.T.); +#200277 = VERTEX_POINT('',#200278); +#200278 = CARTESIAN_POINT('',(206.247925,-79.034193,1.585)); +#200279 = LINE('',#200280,#200281); +#200280 = CARTESIAN_POINT('',(206.290101,-79.118545,1.585)); +#200281 = VECTOR('',#200282,1.); +#200282 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#200283 = ORIENTED_EDGE('',*,*,#200284,.T.); +#200284 = EDGE_CURVE('',#200277,#200285,#200287,.T.); +#200285 = VERTEX_POINT('',#200286); +#200286 = CARTESIAN_POINT('',(206.166544,-78.952812,1.585)); +#200287 = LINE('',#200288,#200289); +#200288 = CARTESIAN_POINT('',(206.247925,-79.034193,1.585)); +#200289 = VECTOR('',#200290,1.); +#200290 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#200291 = ORIENTED_EDGE('',*,*,#200292,.T.); +#200292 = EDGE_CURVE('',#200285,#200293,#200295,.T.); +#200293 = VERTEX_POINT('',#200294); +#200294 = CARTESIAN_POINT('',(206.018491,-78.852378,1.585)); +#200295 = LINE('',#200296,#200297); +#200296 = CARTESIAN_POINT('',(206.166544,-78.952812,1.585)); +#200297 = VECTOR('',#200298,1.); +#200298 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#200299 = ORIENTED_EDGE('',*,*,#200300,.T.); +#200300 = EDGE_CURVE('',#200293,#200301,#200303,.T.); +#200301 = VERTEX_POINT('',#200302); +#200302 = CARTESIAN_POINT('',(206.071469,-78.72429,1.585)); +#200303 = CIRCLE('',#200304,7.499993751709E-02); +#200304 = AXIS2_PLACEMENT_3D('',#200305,#200306,#200307); +#200305 = CARTESIAN_POINT('',(206.07146880902,-78.79928993751,1.585)); +#200306 = DIRECTION('',(0.,0.,-1.)); +#200307 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#200308 = ORIENTED_EDGE('',*,*,#200309,.T.); +#200309 = EDGE_CURVE('',#200301,#200310,#200312,.T.); +#200310 = VERTEX_POINT('',#200311); +#200311 = CARTESIAN_POINT('',(206.996469,-78.72429,1.585)); +#200312 = LINE('',#200313,#200314); +#200313 = CARTESIAN_POINT('',(206.071469,-78.72429,1.585)); +#200314 = VECTOR('',#200315,1.); +#200315 = DIRECTION('',(1.,0.,0.)); +#200316 = ORIENTED_EDGE('',*,*,#200317,.T.); +#200317 = EDGE_CURVE('',#200310,#200318,#200320,.T.); +#200318 = VERTEX_POINT('',#200319); +#200319 = CARTESIAN_POINT('',(206.99791,-78.498944,1.585)); +#200320 = LINE('',#200321,#200322); +#200321 = CARTESIAN_POINT('',(206.996469,-78.72429,1.585)); +#200322 = VECTOR('',#200323,1.); +#200323 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#200324 = ORIENTED_EDGE('',*,*,#200325,.T.); +#200325 = EDGE_CURVE('',#200318,#200326,#200328,.T.); +#200326 = VERTEX_POINT('',#200327); +#200327 = CARTESIAN_POINT('',(207.009109,-78.471908,1.585)); +#200328 = LINE('',#200329,#200330); +#200329 = CARTESIAN_POINT('',(206.99791,-78.498944,1.585)); +#200330 = VECTOR('',#200331,1.); +#200331 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200332 = ORIENTED_EDGE('',*,*,#200333,.T.); +#200333 = EDGE_CURVE('',#200326,#200208,#200334,.T.); +#200334 = LINE('',#200335,#200336); +#200335 = CARTESIAN_POINT('',(207.009109,-78.471908,1.585)); +#200336 = VECTOR('',#200337,1.); +#200337 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200338 = PLANE('',#200339); +#200339 = AXIS2_PLACEMENT_3D('',#200340,#200341,#200342); +#200340 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200341 = DIRECTION('',(0.,0.,1.)); +#200342 = DIRECTION('',(1.,0.,-0.)); +#200343 = SHELL_BASED_SURFACE_MODEL('',(#200344)); +#200344 = OPEN_SHELL('',(#200345)); +#200345 = ADVANCED_FACE('',(#200346),#200516,.T.); +#200346 = FACE_BOUND('',#200347,.F.); +#200347 = EDGE_LOOP('',(#200348,#200359,#200367,#200376,#200384,#200393, + #200401,#200409,#200417,#200426,#200434,#200443,#200451,#200460, + #200468,#200477,#200485,#200493,#200501,#200510)); +#200348 = ORIENTED_EDGE('',*,*,#200349,.T.); +#200349 = EDGE_CURVE('',#200350,#200352,#200354,.T.); +#200350 = VERTEX_POINT('',#200351); +#200351 = CARTESIAN_POINT('',(116.999349,-78.425466,1.585)); +#200352 = VERTEX_POINT('',#200353); +#200353 = CARTESIAN_POINT('',(117.091273,-78.51739,1.585)); +#200354 = CIRCLE('',#200355,6.50000837538E-02); +#200355 = AXIS2_PLACEMENT_3D('',#200356,#200357,#200358); +#200356 = CARTESIAN_POINT('',(117.04531098493,-78.47142801506,1.585)); +#200357 = DIRECTION('',(0.,0.,-1.)); +#200358 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#200359 = ORIENTED_EDGE('',*,*,#200360,.T.); +#200360 = EDGE_CURVE('',#200352,#200361,#200363,.T.); +#200361 = VERTEX_POINT('',#200362); +#200362 = CARTESIAN_POINT('',(117.059266,-78.549396,1.585)); +#200363 = LINE('',#200364,#200365); +#200364 = CARTESIAN_POINT('',(117.091273,-78.51739,1.585)); +#200365 = VECTOR('',#200366,1.); +#200366 = DIRECTION('',(-0.7071178274,-0.7070957348,0.)); +#200367 = ORIENTED_EDGE('',*,*,#200368,.T.); +#200368 = EDGE_CURVE('',#200361,#200369,#200371,.T.); +#200369 = VERTEX_POINT('',#200370); +#200370 = CARTESIAN_POINT('',(117.059265,-78.822029,1.585)); +#200371 = CIRCLE('',#200372,0.272201331757); +#200372 = AXIS2_PLACEMENT_3D('',#200373,#200374,#200375); +#200373 = CARTESIAN_POINT('',(117.29487402454,-78.68571336419,1.585)); +#200374 = DIRECTION('',(0.,0.,1.)); +#200375 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#200376 = ORIENTED_EDGE('',*,*,#200377,.T.); +#200377 = EDGE_CURVE('',#200369,#200378,#200380,.T.); +#200378 = VERTEX_POINT('',#200379); +#200379 = CARTESIAN_POINT('',(117.126669,-78.889435,1.585)); +#200380 = LINE('',#200381,#200382); +#200381 = CARTESIAN_POINT('',(117.059265,-78.822029,1.585)); +#200382 = VECTOR('',#200383,1.); +#200383 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#200384 = ORIENTED_EDGE('',*,*,#200385,.T.); +#200385 = EDGE_CURVE('',#200378,#200386,#200388,.T.); +#200386 = VERTEX_POINT('',#200387); +#200387 = CARTESIAN_POINT('',(117.465881,-78.963571,1.585)); +#200388 = CIRCLE('',#200389,0.553317785495); +#200389 = AXIS2_PLACEMENT_3D('',#200390,#200391,#200392); +#200390 = CARTESIAN_POINT('',(117.4084500839,-78.41324176979,1.585)); +#200391 = DIRECTION('',(0.,0.,1.)); +#200392 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#200393 = ORIENTED_EDGE('',*,*,#200394,.T.); +#200394 = EDGE_CURVE('',#200386,#200395,#200397,.T.); +#200395 = VERTEX_POINT('',#200396); +#200396 = CARTESIAN_POINT('',(117.622622,-78.924385,1.585)); +#200397 = LINE('',#200398,#200399); +#200398 = CARTESIAN_POINT('',(117.465881,-78.963571,1.585)); +#200399 = VECTOR('',#200400,1.); +#200400 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#200401 = ORIENTED_EDGE('',*,*,#200402,.T.); +#200402 = EDGE_CURVE('',#200395,#200403,#200405,.T.); +#200403 = VERTEX_POINT('',#200404); +#200404 = CARTESIAN_POINT('',(117.692522,-78.889436,1.585)); +#200405 = LINE('',#200406,#200407); +#200406 = CARTESIAN_POINT('',(117.622622,-78.924385,1.585)); +#200407 = VECTOR('',#200408,1.); +#200408 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#200409 = ORIENTED_EDGE('',*,*,#200410,.T.); +#200410 = EDGE_CURVE('',#200403,#200411,#200413,.T.); +#200411 = VERTEX_POINT('',#200412); +#200412 = CARTESIAN_POINT('',(117.759928,-78.822029,1.585)); +#200413 = LINE('',#200414,#200415); +#200414 = CARTESIAN_POINT('',(117.692522,-78.889436,1.585)); +#200415 = VECTOR('',#200416,1.); +#200416 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#200417 = ORIENTED_EDGE('',*,*,#200418,.T.); +#200418 = EDGE_CURVE('',#200411,#200419,#200421,.T.); +#200419 = VERTEX_POINT('',#200420); +#200420 = CARTESIAN_POINT('',(117.759928,-78.549397,1.585)); +#200421 = CIRCLE('',#200422,0.272194686174); +#200422 = AXIS2_PLACEMENT_3D('',#200423,#200424,#200425); +#200423 = CARTESIAN_POINT('',(117.52432686391,-78.685713,1.585)); +#200424 = DIRECTION('',(0.,-0.,1.)); +#200425 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#200426 = ORIENTED_EDGE('',*,*,#200427,.T.); +#200427 = EDGE_CURVE('',#200419,#200428,#200430,.T.); +#200428 = VERTEX_POINT('',#200429); +#200429 = CARTESIAN_POINT('',(117.727921,-78.51739,1.585)); +#200430 = LINE('',#200431,#200432); +#200431 = CARTESIAN_POINT('',(117.759928,-78.549397,1.585)); +#200432 = VECTOR('',#200433,1.); +#200433 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#200434 = ORIENTED_EDGE('',*,*,#200435,.T.); +#200435 = EDGE_CURVE('',#200428,#200436,#200438,.T.); +#200436 = VERTEX_POINT('',#200437); +#200437 = CARTESIAN_POINT('',(117.819843,-78.425466,1.585)); +#200438 = CIRCLE('',#200439,6.49993766517E-02); +#200439 = AXIS2_PLACEMENT_3D('',#200440,#200441,#200442); +#200440 = CARTESIAN_POINT('',(117.77388176676,-78.47142776677,1.585)); +#200441 = DIRECTION('',(0.,0.,-1.)); +#200442 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#200443 = ORIENTED_EDGE('',*,*,#200444,.T.); +#200444 = EDGE_CURVE('',#200436,#200445,#200447,.T.); +#200445 = VERTEX_POINT('',#200446); +#200446 = CARTESIAN_POINT('',(117.871003,-78.480747,1.585)); +#200447 = LINE('',#200448,#200449); +#200448 = CARTESIAN_POINT('',(117.819843,-78.425466,1.585)); +#200449 = VECTOR('',#200450,1.); +#200450 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#200451 = ORIENTED_EDGE('',*,*,#200452,.T.); +#200452 = EDGE_CURVE('',#200445,#200453,#200455,.T.); +#200453 = VERTEX_POINT('',#200454); +#200454 = CARTESIAN_POINT('',(117.870999,-78.890685,1.585)); +#200455 = CIRCLE('',#200456,0.409312568567); +#200456 = AXIS2_PLACEMENT_3D('',#200457,#200458,#200459); +#200457 = CARTESIAN_POINT('',(117.51670664806,-78.68571254294,1.585)); +#200458 = DIRECTION('',(0.,0.,-1.)); +#200459 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#200460 = ORIENTED_EDGE('',*,*,#200461,.T.); +#200461 = EDGE_CURVE('',#200453,#200462,#200464,.T.); +#200462 = VERTEX_POINT('',#200463); +#200463 = CARTESIAN_POINT('',(117.768322,-78.994608,1.585)); +#200464 = LINE('',#200465,#200466); +#200465 = CARTESIAN_POINT('',(117.870999,-78.890685,1.585)); +#200466 = VECTOR('',#200467,1.); +#200467 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#200468 = ORIENTED_EDGE('',*,*,#200469,.T.); +#200469 = EDGE_CURVE('',#200462,#200470,#200472,.T.); +#200470 = VERTEX_POINT('',#200471); +#200471 = CARTESIAN_POINT('',(117.329546,-79.09163,1.585)); +#200472 = CIRCLE('',#200473,0.675422176574); +#200473 = AXIS2_PLACEMENT_3D('',#200474,#200475,#200476); +#200474 = CARTESIAN_POINT('',(117.41141275007,-78.42118764465,1.585)); +#200475 = DIRECTION('',(0.,0.,-1.)); +#200476 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#200477 = ORIENTED_EDGE('',*,*,#200478,.T.); +#200478 = EDGE_CURVE('',#200470,#200479,#200481,.T.); +#200479 = VERTEX_POINT('',#200480); +#200480 = CARTESIAN_POINT('',(117.144813,-79.043852,1.585)); +#200481 = LINE('',#200482,#200483); +#200482 = CARTESIAN_POINT('',(117.329546,-79.09163,1.585)); +#200483 = VECTOR('',#200484,1.); +#200484 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#200485 = ORIENTED_EDGE('',*,*,#200486,.T.); +#200486 = EDGE_CURVE('',#200479,#200487,#200489,.T.); +#200487 = VERTEX_POINT('',#200488); +#200488 = CARTESIAN_POINT('',(117.042206,-78.988819,1.585)); +#200489 = LINE('',#200490,#200491); +#200490 = CARTESIAN_POINT('',(117.144813,-79.043852,1.585)); +#200491 = VECTOR('',#200492,1.); +#200492 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#200493 = ORIENTED_EDGE('',*,*,#200494,.T.); +#200494 = EDGE_CURVE('',#200487,#200495,#200497,.T.); +#200495 = VERTEX_POINT('',#200496); +#200496 = CARTESIAN_POINT('',(116.948191,-78.890681,1.585)); +#200497 = LINE('',#200498,#200499); +#200498 = CARTESIAN_POINT('',(117.042206,-78.988819,1.585)); +#200499 = VECTOR('',#200500,1.); +#200500 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#200501 = ORIENTED_EDGE('',*,*,#200502,.T.); +#200502 = EDGE_CURVE('',#200495,#200503,#200505,.T.); +#200503 = VERTEX_POINT('',#200504); +#200504 = CARTESIAN_POINT('',(116.948194,-78.480741,1.585)); +#200505 = CIRCLE('',#200506,0.409312909751); +#200506 = AXIS2_PLACEMENT_3D('',#200507,#200508,#200509); +#200507 = CARTESIAN_POINT('',(117.30248666757,-78.68571359277,1.585)); +#200508 = DIRECTION('',(0.,0.,-1.)); +#200509 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#200510 = ORIENTED_EDGE('',*,*,#200511,.T.); +#200511 = EDGE_CURVE('',#200503,#200350,#200512,.T.); +#200512 = LINE('',#200513,#200514); +#200513 = CARTESIAN_POINT('',(116.948194,-78.480741,1.585)); +#200514 = VECTOR('',#200515,1.); +#200515 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#200516 = PLANE('',#200517); +#200517 = AXIS2_PLACEMENT_3D('',#200518,#200519,#200520); +#200518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200519 = DIRECTION('',(0.,0.,1.)); +#200520 = DIRECTION('',(1.,0.,-0.)); +#200521 = SHELL_BASED_SURFACE_MODEL('',(#200522)); +#200522 = OPEN_SHELL('',(#200523)); +#200523 = ADVANCED_FACE('',(#200524),#200681,.T.); +#200524 = FACE_BOUND('',#200525,.F.); +#200525 = EDGE_LOOP('',(#200526,#200536,#200544,#200553,#200561,#200569, + #200577,#200585,#200593,#200601,#200609,#200618,#200626,#200634, + #200642,#200650,#200659,#200667,#200675)); +#200526 = ORIENTED_EDGE('',*,*,#200527,.T.); +#200527 = EDGE_CURVE('',#200528,#200530,#200532,.T.); +#200528 = VERTEX_POINT('',#200529); +#200529 = CARTESIAN_POINT('',(166.369514,-77.924941,1.585)); +#200530 = VERTEX_POINT('',#200531); +#200531 = CARTESIAN_POINT('',(166.40797,-77.90436,1.585)); +#200532 = LINE('',#200533,#200534); +#200533 = CARTESIAN_POINT('',(166.369514,-77.924941,1.585)); +#200534 = VECTOR('',#200535,1.); +#200535 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#200536 = ORIENTED_EDGE('',*,*,#200537,.T.); +#200537 = EDGE_CURVE('',#200530,#200538,#200540,.T.); +#200538 = VERTEX_POINT('',#200539); +#200539 = CARTESIAN_POINT('',(166.429807,-77.90436,1.585)); +#200540 = LINE('',#200541,#200542); +#200541 = CARTESIAN_POINT('',(166.40797,-77.90436,1.585)); +#200542 = VECTOR('',#200543,1.); +#200543 = DIRECTION('',(1.,0.,0.)); +#200544 = ORIENTED_EDGE('',*,*,#200545,.T.); +#200545 = EDGE_CURVE('',#200538,#200546,#200548,.T.); +#200546 = VERTEX_POINT('',#200547); +#200547 = CARTESIAN_POINT('',(166.497602,-77.977919,1.585)); +#200548 = CIRCLE('',#200549,7.216898094227E-02); +#200549 = AXIS2_PLACEMENT_3D('',#200550,#200551,#200552); +#200550 = CARTESIAN_POINT('',(166.42544906389,-77.97639728342,1.585)); +#200551 = DIRECTION('',(0.,0.,-1.)); +#200552 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#200553 = ORIENTED_EDGE('',*,*,#200554,.T.); +#200554 = EDGE_CURVE('',#200546,#200555,#200557,.T.); +#200555 = VERTEX_POINT('',#200556); +#200556 = CARTESIAN_POINT('',(166.497602,-78.902919,1.585)); +#200557 = LINE('',#200558,#200559); +#200558 = CARTESIAN_POINT('',(166.497602,-77.977919,1.585)); +#200559 = VECTOR('',#200560,1.); +#200560 = DIRECTION('',(0.,-1.,0.)); +#200561 = ORIENTED_EDGE('',*,*,#200562,.T.); +#200562 = EDGE_CURVE('',#200555,#200563,#200565,.T.); +#200563 = VERTEX_POINT('',#200564); +#200564 = CARTESIAN_POINT('',(166.717739,-78.904326,1.585)); +#200565 = LINE('',#200566,#200567); +#200566 = CARTESIAN_POINT('',(166.497602,-78.902919,1.585)); +#200567 = VECTOR('',#200568,1.); +#200568 = DIRECTION('',(0.999979575153,-6.39134385515E-03,0.)); +#200569 = ORIENTED_EDGE('',*,*,#200570,.T.); +#200570 = EDGE_CURVE('',#200563,#200571,#200573,.T.); +#200571 = VERTEX_POINT('',#200572); +#200572 = CARTESIAN_POINT('',(166.714714,-78.90558,1.585)); +#200573 = LINE('',#200574,#200575); +#200574 = CARTESIAN_POINT('',(166.717739,-78.904326,1.585)); +#200575 = VECTOR('',#200576,1.); +#200576 = DIRECTION('',(-0.923771098667,-0.382945109993,0.)); +#200577 = ORIENTED_EDGE('',*,*,#200578,.T.); +#200578 = EDGE_CURVE('',#200571,#200579,#200581,.T.); +#200579 = VERTEX_POINT('',#200580); +#200580 = CARTESIAN_POINT('',(166.67333,-78.946964,1.585)); +#200581 = LINE('',#200582,#200583); +#200582 = CARTESIAN_POINT('',(166.714714,-78.90558,1.585)); +#200583 = VECTOR('',#200584,1.); +#200584 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200585 = ORIENTED_EDGE('',*,*,#200586,.T.); +#200586 = EDGE_CURVE('',#200579,#200587,#200589,.T.); +#200587 = VERTEX_POINT('',#200588); +#200588 = CARTESIAN_POINT('',(166.650932,-79.001036,1.585)); +#200589 = LINE('',#200590,#200591); +#200590 = CARTESIAN_POINT('',(166.67333,-78.946964,1.585)); +#200591 = VECTOR('',#200592,1.); +#200592 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200593 = ORIENTED_EDGE('',*,*,#200594,.T.); +#200594 = EDGE_CURVE('',#200587,#200595,#200597,.T.); +#200595 = VERTEX_POINT('',#200596); +#200596 = CARTESIAN_POINT('',(166.650932,-79.052777,1.585)); +#200597 = LINE('',#200598,#200599); +#200598 = CARTESIAN_POINT('',(166.650932,-79.001036,1.585)); +#200599 = VECTOR('',#200600,1.); +#200600 = DIRECTION('',(0.,-1.,0.)); +#200601 = ORIENTED_EDGE('',*,*,#200602,.T.); +#200602 = EDGE_CURVE('',#200595,#200603,#200605,.T.); +#200603 = VERTEX_POINT('',#200604); +#200604 = CARTESIAN_POINT('',(166.122256,-79.051478,1.585)); +#200605 = LINE('',#200606,#200607); +#200606 = CARTESIAN_POINT('',(166.650932,-79.052777,1.585)); +#200607 = VECTOR('',#200608,1.); +#200608 = DIRECTION('',(-0.999996981389,2.457074046916E-03,0.)); +#200609 = ORIENTED_EDGE('',*,*,#200610,.T.); +#200610 = EDGE_CURVE('',#200603,#200611,#200613,.T.); +#200611 = VERTEX_POINT('',#200612); +#200612 = CARTESIAN_POINT('',(166.136888,-78.902919,1.585)); +#200613 = CIRCLE('',#200614,7.500006711464E-02); +#200614 = AXIS2_PLACEMENT_3D('',#200615,#200616,#200617); +#200615 = CARTESIAN_POINT('',(166.13688793288,-78.97791906711,1.585)); +#200616 = DIRECTION('',(0.,0.,-1.)); +#200617 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#200618 = ORIENTED_EDGE('',*,*,#200619,.T.); +#200619 = EDGE_CURVE('',#200611,#200620,#200622,.T.); +#200620 = VERTEX_POINT('',#200621); +#200621 = CARTESIAN_POINT('',(166.347602,-78.902919,1.585)); +#200622 = LINE('',#200623,#200624); +#200623 = CARTESIAN_POINT('',(166.136888,-78.902919,1.585)); +#200624 = VECTOR('',#200625,1.); +#200625 = DIRECTION('',(1.,0.,0.)); +#200626 = ORIENTED_EDGE('',*,*,#200627,.T.); +#200627 = EDGE_CURVE('',#200620,#200628,#200630,.T.); +#200628 = VERTEX_POINT('',#200629); +#200629 = CARTESIAN_POINT('',(166.347602,-78.206604,1.585)); +#200630 = LINE('',#200631,#200632); +#200631 = CARTESIAN_POINT('',(166.347602,-78.902919,1.585)); +#200632 = VECTOR('',#200633,1.); +#200633 = DIRECTION('',(0.,1.,0.)); +#200634 = ORIENTED_EDGE('',*,*,#200635,.T.); +#200635 = EDGE_CURVE('',#200628,#200636,#200638,.T.); +#200636 = VERTEX_POINT('',#200637); +#200637 = CARTESIAN_POINT('',(166.271966,-78.279131,1.585)); +#200638 = LINE('',#200639,#200640); +#200639 = CARTESIAN_POINT('',(166.347602,-78.206604,1.585)); +#200640 = VECTOR('',#200641,1.); +#200641 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#200642 = ORIENTED_EDGE('',*,*,#200643,.T.); +#200643 = EDGE_CURVE('',#200636,#200644,#200646,.T.); +#200644 = VERTEX_POINT('',#200645); +#200645 = CARTESIAN_POINT('',(166.156697,-78.33597,1.585)); +#200646 = LINE('',#200647,#200648); +#200647 = CARTESIAN_POINT('',(166.271966,-78.279131,1.585)); +#200648 = VECTOR('',#200649,1.); +#200649 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#200650 = ORIENTED_EDGE('',*,*,#200651,.T.); +#200651 = EDGE_CURVE('',#200644,#200652,#200654,.T.); +#200652 = VERTEX_POINT('',#200653); +#200653 = CARTESIAN_POINT('',(166.103347,-78.196551,1.585)); +#200654 = CIRCLE('',#200655,7.500005272361E-02); +#200655 = AXIS2_PLACEMENT_3D('',#200656,#200657,#200658); +#200656 = CARTESIAN_POINT('',(166.13688755676,-78.26363332972,1.585)); +#200657 = DIRECTION('',(0.,0.,-1.)); +#200658 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#200659 = ORIENTED_EDGE('',*,*,#200660,.T.); +#200660 = EDGE_CURVE('',#200652,#200661,#200663,.T.); +#200661 = VERTEX_POINT('',#200662); +#200662 = CARTESIAN_POINT('',(166.187699,-78.154375,1.585)); +#200663 = LINE('',#200664,#200665); +#200664 = CARTESIAN_POINT('',(166.103347,-78.196551,1.585)); +#200665 = VECTOR('',#200666,1.); +#200666 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#200667 = ORIENTED_EDGE('',*,*,#200668,.T.); +#200668 = EDGE_CURVE('',#200661,#200669,#200671,.T.); +#200669 = VERTEX_POINT('',#200670); +#200670 = CARTESIAN_POINT('',(166.269078,-78.072996,1.585)); +#200671 = LINE('',#200672,#200673); +#200672 = CARTESIAN_POINT('',(166.187699,-78.154375,1.585)); +#200673 = VECTOR('',#200674,1.); +#200674 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200675 = ORIENTED_EDGE('',*,*,#200676,.T.); +#200676 = EDGE_CURVE('',#200669,#200528,#200677,.T.); +#200677 = LINE('',#200678,#200679); +#200678 = CARTESIAN_POINT('',(166.269078,-78.072996,1.585)); +#200679 = VECTOR('',#200680,1.); +#200680 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#200681 = PLANE('',#200682); +#200682 = AXIS2_PLACEMENT_3D('',#200683,#200684,#200685); +#200683 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200684 = DIRECTION('',(0.,0.,1.)); +#200685 = DIRECTION('',(1.,0.,-0.)); +#200686 = SHELL_BASED_SURFACE_MODEL('',(#200687)); +#200687 = OPEN_SHELL('',(#200688)); +#200688 = ADVANCED_FACE('',(#200689),#200775,.T.); +#200689 = FACE_BOUND('',#200690,.F.); +#200690 = EDGE_LOOP('',(#200691,#200702,#200710,#200719,#200727,#200736, + #200744,#200753,#200761,#200769)); +#200691 = ORIENTED_EDGE('',*,*,#200692,.T.); +#200692 = EDGE_CURVE('',#200693,#200695,#200697,.T.); +#200693 = VERTEX_POINT('',#200694); +#200694 = CARTESIAN_POINT('',(164.666648,-77.915559,1.585)); +#200695 = VERTEX_POINT('',#200696); +#200696 = CARTESIAN_POINT('',(164.783316,-77.977919,1.585)); +#200697 = CIRCLE('',#200698,7.500000000003E-02); +#200698 = AXIS2_PLACEMENT_3D('',#200699,#200700,#200701); +#200699 = CARTESIAN_POINT('',(164.708316,-77.97791906555,1.585)); +#200700 = DIRECTION('',(0.,0.,-1.)); +#200701 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#200702 = ORIENTED_EDGE('',*,*,#200703,.T.); +#200703 = EDGE_CURVE('',#200695,#200704,#200706,.T.); +#200704 = VERTEX_POINT('',#200705); +#200705 = CARTESIAN_POINT('',(164.781116,-78.708666,1.585)); +#200706 = LINE('',#200707,#200708); +#200707 = CARTESIAN_POINT('',(164.783316,-77.977919,1.585)); +#200708 = VECTOR('',#200709,1.); +#200709 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#200710 = ORIENTED_EDGE('',*,*,#200711,.T.); +#200711 = EDGE_CURVE('',#200704,#200712,#200714,.T.); +#200712 = VERTEX_POINT('',#200713); +#200713 = CARTESIAN_POINT('',(164.430007,-79.052189,1.585)); +#200714 = CIRCLE('',#200715,0.38184101318); +#200715 = AXIS2_PLACEMENT_3D('',#200716,#200717,#200718); +#200716 = CARTESIAN_POINT('',(164.40109350032,-78.67144424444,1.585)); +#200717 = DIRECTION('',(0.,0.,-1.)); +#200718 = DIRECTION('',(0.995237511316,-9.747972132579E-02,0.)); +#200719 = ORIENTED_EDGE('',*,*,#200720,.T.); +#200720 = EDGE_CURVE('',#200712,#200721,#200723,.T.); +#200721 = VERTEX_POINT('',#200722); +#200722 = CARTESIAN_POINT('',(164.312732,-79.051478,1.585)); +#200723 = LINE('',#200724,#200725); +#200724 = CARTESIAN_POINT('',(164.430007,-79.052189,1.585)); +#200725 = VECTOR('',#200726,1.); +#200726 = DIRECTION('',(-0.999981622503,6.062561787214E-03,0.)); +#200727 = ORIENTED_EDGE('',*,*,#200728,.T.); +#200728 = EDGE_CURVE('',#200721,#200729,#200731,.T.); +#200729 = VERTEX_POINT('',#200730); +#200730 = CARTESIAN_POINT('',(164.327364,-78.902919,1.585)); +#200731 = CIRCLE('',#200732,7.500006711465E-02); +#200732 = AXIS2_PLACEMENT_3D('',#200733,#200734,#200735); +#200733 = CARTESIAN_POINT('',(164.32736393288,-78.97791906711,1.585)); +#200734 = DIRECTION('',(0.,0.,-1.)); +#200735 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#200736 = ORIENTED_EDGE('',*,*,#200737,.T.); +#200737 = EDGE_CURVE('',#200729,#200738,#200740,.T.); +#200738 = VERTEX_POINT('',#200739); +#200739 = CARTESIAN_POINT('',(164.410432,-78.902919,1.585)); +#200740 = LINE('',#200741,#200742); +#200741 = CARTESIAN_POINT('',(164.327364,-78.902919,1.585)); +#200742 = VECTOR('',#200743,1.); +#200743 = DIRECTION('',(1.,0.,0.)); +#200744 = ORIENTED_EDGE('',*,*,#200745,.T.); +#200745 = EDGE_CURVE('',#200738,#200746,#200748,.T.); +#200746 = VERTEX_POINT('',#200747); +#200747 = CARTESIAN_POINT('',(164.633316,-78.680034,1.585)); +#200748 = CIRCLE('',#200749,0.239437351684); +#200749 = AXIS2_PLACEMENT_3D('',#200750,#200751,#200752); +#200750 = CARTESIAN_POINT('',(164.39441490658,-78.66401797844,1.585)); +#200751 = DIRECTION('',(0.,0.,1.)); +#200752 = DIRECTION('',(6.689471506001E-02,-0.997760039838,0.)); +#200753 = ORIENTED_EDGE('',*,*,#200754,.T.); +#200754 = EDGE_CURVE('',#200746,#200755,#200757,.T.); +#200755 = VERTEX_POINT('',#200756); +#200756 = CARTESIAN_POINT('',(164.634757,-77.963287,1.585)); +#200757 = LINE('',#200758,#200759); +#200758 = CARTESIAN_POINT('',(164.633316,-78.680034,1.585)); +#200759 = VECTOR('',#200760,1.); +#200760 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#200761 = ORIENTED_EDGE('',*,*,#200762,.T.); +#200762 = EDGE_CURVE('',#200755,#200763,#200765,.T.); +#200763 = VERTEX_POINT('',#200764); +#200764 = CARTESIAN_POINT('',(164.645956,-77.936251,1.585)); +#200765 = LINE('',#200766,#200767); +#200766 = CARTESIAN_POINT('',(164.634757,-77.963287,1.585)); +#200767 = VECTOR('',#200768,1.); +#200768 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200769 = ORIENTED_EDGE('',*,*,#200770,.T.); +#200770 = EDGE_CURVE('',#200763,#200693,#200771,.T.); +#200771 = LINE('',#200772,#200773); +#200772 = CARTESIAN_POINT('',(164.645956,-77.936251,1.585)); +#200773 = VECTOR('',#200774,1.); +#200774 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200775 = PLANE('',#200776); +#200776 = AXIS2_PLACEMENT_3D('',#200777,#200778,#200779); +#200777 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200778 = DIRECTION('',(0.,0.,1.)); +#200779 = DIRECTION('',(1.,0.,-0.)); +#200780 = SHELL_BASED_SURFACE_MODEL('',(#200781)); +#200781 = OPEN_SHELL('',(#200782)); +#200782 = ADVANCED_FACE('',(#200783,#200861),#200913,.T.); +#200783 = FACE_BOUND('',#200784,.F.); +#200784 = EDGE_LOOP('',(#200785,#200796,#200804,#200813,#200821,#200830, + #200838,#200846,#200855)); +#200785 = ORIENTED_EDGE('',*,*,#200786,.T.); +#200786 = EDGE_CURVE('',#200787,#200789,#200791,.T.); +#200787 = VERTEX_POINT('',#200788); +#200788 = CARTESIAN_POINT('',(165.110948,-77.963287,1.585)); +#200789 = VERTEX_POINT('',#200790); +#200790 = CARTESIAN_POINT('',(165.184507,-77.902919,1.585)); +#200791 = CIRCLE('',#200792,7.500074938986E-02); +#200792 = AXIS2_PLACEMENT_3D('',#200793,#200794,#200795); +#200793 = CARTESIAN_POINT('',(165.18450746611,-77.97791974938,1.585)); +#200794 = DIRECTION('',(0.,0.,-1.)); +#200795 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#200796 = ORIENTED_EDGE('',*,*,#200797,.T.); +#200797 = EDGE_CURVE('',#200789,#200798,#200800,.T.); +#200798 = VERTEX_POINT('',#200799); +#200799 = CARTESIAN_POINT('',(165.580091,-77.90436,1.585)); +#200800 = LINE('',#200801,#200802); +#200801 = CARTESIAN_POINT('',(165.184507,-77.902919,1.585)); +#200802 = VECTOR('',#200803,1.); +#200803 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#200804 = ORIENTED_EDGE('',*,*,#200805,.T.); +#200805 = EDGE_CURVE('',#200798,#200806,#200808,.T.); +#200806 = VERTEX_POINT('',#200807); +#200807 = CARTESIAN_POINT('',(165.829494,-78.153763,1.585)); +#200808 = CIRCLE('',#200809,0.347870264855); +#200809 = AXIS2_PLACEMENT_3D('',#200810,#200811,#200812); +#200810 = CARTESIAN_POINT('',(165.49276326502,-78.24109073497,1.585)); +#200811 = DIRECTION('',(0.,0.,-1.)); +#200812 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#200813 = ORIENTED_EDGE('',*,*,#200814,.T.); +#200814 = EDGE_CURVE('',#200806,#200815,#200817,.T.); +#200815 = VERTEX_POINT('',#200816); +#200816 = CARTESIAN_POINT('',(165.828272,-78.331062,1.585)); +#200817 = LINE('',#200818,#200819); +#200818 = CARTESIAN_POINT('',(165.829494,-78.153763,1.585)); +#200819 = VECTOR('',#200820,1.); +#200820 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#200821 = ORIENTED_EDGE('',*,*,#200822,.T.); +#200822 = EDGE_CURVE('',#200815,#200823,#200825,.T.); +#200823 = VERTEX_POINT('',#200824); +#200824 = CARTESIAN_POINT('',(165.580091,-78.575287,1.585)); +#200825 = CIRCLE('',#200826,0.348632345849); +#200826 = AXIS2_PLACEMENT_3D('',#200827,#200828,#200829); +#200827 = CARTESIAN_POINT('',(165.49232219403,-78.2378834593,1.585)); +#200828 = DIRECTION('',(0.,0.,-1.)); +#200829 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#200830 = ORIENTED_EDGE('',*,*,#200831,.T.); +#200831 = EDGE_CURVE('',#200823,#200832,#200834,.T.); +#200832 = VERTEX_POINT('',#200833); +#200833 = CARTESIAN_POINT('',(165.259507,-78.576728,1.585)); +#200834 = LINE('',#200835,#200836); +#200835 = CARTESIAN_POINT('',(165.580091,-78.575287,1.585)); +#200836 = VECTOR('',#200837,1.); +#200837 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#200838 = ORIENTED_EDGE('',*,*,#200839,.T.); +#200839 = EDGE_CURVE('',#200832,#200840,#200842,.T.); +#200840 = VERTEX_POINT('',#200841); +#200841 = CARTESIAN_POINT('',(165.258066,-78.992551,1.585)); +#200842 = LINE('',#200843,#200844); +#200843 = CARTESIAN_POINT('',(165.259507,-78.576728,1.585)); +#200844 = VECTOR('',#200845,1.); +#200845 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#200846 = ORIENTED_EDGE('',*,*,#200847,.T.); +#200847 = EDGE_CURVE('',#200840,#200848,#200850,.T.); +#200848 = VERTEX_POINT('',#200849); +#200849 = CARTESIAN_POINT('',(165.109507,-78.977919,1.585)); +#200850 = CIRCLE('',#200851,7.500006711464E-02); +#200851 = AXIS2_PLACEMENT_3D('',#200852,#200853,#200854); +#200852 = CARTESIAN_POINT('',(165.18450706711,-78.97791906711,1.585)); +#200853 = DIRECTION('',(-0.,0.,-1.)); +#200854 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#200855 = ORIENTED_EDGE('',*,*,#200856,.T.); +#200856 = EDGE_CURVE('',#200848,#200787,#200857,.T.); +#200857 = LINE('',#200858,#200859); +#200858 = CARTESIAN_POINT('',(165.109507,-78.977919,1.585)); +#200859 = VECTOR('',#200860,1.); +#200860 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#200861 = FACE_BOUND('',#200862,.F.); +#200862 = EDGE_LOOP('',(#200863,#200874,#200882,#200890,#200898,#200907) + ); +#200863 = ORIENTED_EDGE('',*,*,#200864,.T.); +#200864 = EDGE_CURVE('',#200865,#200867,#200869,.T.); +#200865 = VERTEX_POINT('',#200866); +#200866 = CARTESIAN_POINT('',(165.680935,-78.1861,1.585)); +#200867 = VERTEX_POINT('',#200868); +#200868 = CARTESIAN_POINT('',(165.547754,-78.052919,1.585)); +#200869 = CIRCLE('',#200870,0.18686440374); +#200870 = AXIS2_PLACEMENT_3D('',#200871,#200872,#200873); +#200871 = CARTESIAN_POINT('',(165.500218,-78.233636,1.585)); +#200872 = DIRECTION('',(0.,0.,1.)); +#200873 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#200874 = ORIENTED_EDGE('',*,*,#200875,.T.); +#200875 = EDGE_CURVE('',#200867,#200876,#200878,.T.); +#200876 = VERTEX_POINT('',#200877); +#200877 = CARTESIAN_POINT('',(165.259507,-78.052919,1.585)); +#200878 = LINE('',#200879,#200880); +#200879 = CARTESIAN_POINT('',(165.547754,-78.052919,1.585)); +#200880 = VECTOR('',#200881,1.); +#200881 = DIRECTION('',(-1.,0.,0.)); +#200882 = ORIENTED_EDGE('',*,*,#200883,.T.); +#200883 = EDGE_CURVE('',#200876,#200884,#200886,.T.); +#200884 = VERTEX_POINT('',#200885); +#200885 = CARTESIAN_POINT('',(165.259507,-78.426728,1.585)); +#200886 = LINE('',#200887,#200888); +#200887 = CARTESIAN_POINT('',(165.259507,-78.052919,1.585)); +#200888 = VECTOR('',#200889,1.); +#200889 = DIRECTION('',(0.,-1.,0.)); +#200890 = ORIENTED_EDGE('',*,*,#200891,.T.); +#200891 = EDGE_CURVE('',#200884,#200892,#200894,.T.); +#200892 = VERTEX_POINT('',#200893); +#200893 = CARTESIAN_POINT('',(165.547754,-78.426728,1.585)); +#200894 = LINE('',#200895,#200896); +#200895 = CARTESIAN_POINT('',(165.259507,-78.426728,1.585)); +#200896 = VECTOR('',#200897,1.); +#200897 = DIRECTION('',(1.,0.,0.)); +#200898 = ORIENTED_EDGE('',*,*,#200899,.T.); +#200899 = EDGE_CURVE('',#200892,#200900,#200902,.T.); +#200900 = VERTEX_POINT('',#200901); +#200901 = CARTESIAN_POINT('',(165.680935,-78.293547,1.585)); +#200902 = CIRCLE('',#200903,0.18686440374); +#200903 = AXIS2_PLACEMENT_3D('',#200904,#200905,#200906); +#200904 = CARTESIAN_POINT('',(165.500218,-78.246011,1.585)); +#200905 = DIRECTION('',(0.,0.,1.)); +#200906 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#200907 = ORIENTED_EDGE('',*,*,#200908,.T.); +#200908 = EDGE_CURVE('',#200900,#200865,#200909,.T.); +#200909 = LINE('',#200910,#200911); +#200910 = CARTESIAN_POINT('',(165.680935,-78.293547,1.585)); +#200911 = VECTOR('',#200912,1.); +#200912 = DIRECTION('',(0.,1.,0.)); +#200913 = PLANE('',#200914); +#200914 = AXIS2_PLACEMENT_3D('',#200915,#200916,#200917); +#200915 = CARTESIAN_POINT('',(0.,0.,1.585)); +#200916 = DIRECTION('',(0.,0.,1.)); +#200917 = DIRECTION('',(1.,0.,-0.)); +#200918 = SHELL_BASED_SURFACE_MODEL('',(#200919)); +#200919 = OPEN_SHELL('',(#200920)); +#200920 = ADVANCED_FACE('',(#200921),#201048,.T.); +#200921 = FACE_BOUND('',#200922,.F.); +#200922 = EDGE_LOOP('',(#200923,#200934,#200942,#200950,#200958,#200966, + #200975,#200983,#200991,#200999,#201008,#201016,#201025,#201033, + #201042)); +#200923 = ORIENTED_EDGE('',*,*,#200924,.T.); +#200924 = EDGE_CURVE('',#200925,#200927,#200929,.T.); +#200925 = VERTEX_POINT('',#200926); +#200926 = CARTESIAN_POINT('',(119.359597,-78.486428,1.585)); +#200927 = VERTEX_POINT('',#200928); +#200928 = CARTESIAN_POINT('',(119.359597,-78.356428,1.585)); +#200929 = CIRCLE('',#200930,6.500000000092E-02); +#200930 = AXIS2_PLACEMENT_3D('',#200931,#200932,#200933); +#200931 = CARTESIAN_POINT('',(119.35959734486,-78.421428,1.585)); +#200932 = DIRECTION('',(0.,0.,-1.)); +#200933 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#200934 = ORIENTED_EDGE('',*,*,#200935,.T.); +#200935 = EDGE_CURVE('',#200927,#200936,#200938,.T.); +#200936 = VERTEX_POINT('',#200937); +#200937 = CARTESIAN_POINT('',(120.091361,-78.357063,1.585)); +#200938 = LINE('',#200939,#200940); +#200939 = CARTESIAN_POINT('',(119.359597,-78.356428,1.585)); +#200940 = VECTOR('',#200941,1.); +#200941 = DIRECTION('',(0.999999623491,-8.677657836673E-04,0.)); +#200942 = ORIENTED_EDGE('',*,*,#200943,.T.); +#200943 = EDGE_CURVE('',#200936,#200944,#200946,.T.); +#200944 = VERTEX_POINT('',#200945); +#200945 = CARTESIAN_POINT('',(120.117237,-78.36329,1.585)); +#200946 = LINE('',#200947,#200948); +#200947 = CARTESIAN_POINT('',(120.091361,-78.357063,1.585)); +#200948 = VECTOR('',#200949,1.); +#200949 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#200950 = ORIENTED_EDGE('',*,*,#200951,.T.); +#200951 = EDGE_CURVE('',#200944,#200952,#200954,.T.); +#200952 = VERTEX_POINT('',#200953); +#200953 = CARTESIAN_POINT('',(120.219843,-78.418323,1.585)); +#200954 = LINE('',#200955,#200956); +#200955 = CARTESIAN_POINT('',(120.117237,-78.36329,1.585)); +#200956 = VECTOR('',#200957,1.); +#200957 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#200958 = ORIENTED_EDGE('',*,*,#200959,.T.); +#200959 = EDGE_CURVE('',#200952,#200960,#200962,.T.); +#200960 = VERTEX_POINT('',#200961); +#200961 = CARTESIAN_POINT('',(120.274878,-78.478073,1.585)); +#200962 = LINE('',#200963,#200964); +#200963 = CARTESIAN_POINT('',(120.219843,-78.418323,1.585)); +#200964 = VECTOR('',#200965,1.); +#200965 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#200966 = ORIENTED_EDGE('',*,*,#200967,.T.); +#200967 = EDGE_CURVE('',#200960,#200968,#200970,.T.); +#200968 = VERTEX_POINT('',#200969); +#200969 = CARTESIAN_POINT('',(120.268491,-78.887297,1.585)); +#200970 = CIRCLE('',#200971,0.358409955812); +#200971 = AXIS2_PLACEMENT_3D('',#200972,#200973,#200974); +#200972 = CARTESIAN_POINT('',(119.97747311066,-78.67809306955,1.585)); +#200973 = DIRECTION('',(0.,0.,-1.)); +#200974 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#200975 = ORIENTED_EDGE('',*,*,#200976,.T.); +#200976 = EDGE_CURVE('',#200968,#200977,#200979,.T.); +#200977 = VERTEX_POINT('',#200978); +#200978 = CARTESIAN_POINT('',(120.211186,-78.944603,1.585)); +#200979 = LINE('',#200980,#200981); +#200980 = CARTESIAN_POINT('',(120.268491,-78.887297,1.585)); +#200981 = VECTOR('',#200982,1.); +#200982 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#200983 = ORIENTED_EDGE('',*,*,#200984,.T.); +#200984 = EDGE_CURVE('',#200977,#200985,#200987,.T.); +#200985 = VERTEX_POINT('',#200986); +#200986 = CARTESIAN_POINT('',(120.102824,-78.997798,1.585)); +#200987 = LINE('',#200988,#200989); +#200988 = CARTESIAN_POINT('',(120.211186,-78.944603,1.585)); +#200989 = VECTOR('',#200990,1.); +#200990 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#200991 = ORIENTED_EDGE('',*,*,#200992,.T.); +#200992 = EDGE_CURVE('',#200985,#200993,#200995,.T.); +#200993 = VERTEX_POINT('',#200994); +#200994 = CARTESIAN_POINT('',(119.359597,-79.000714,1.585)); +#200995 = LINE('',#200996,#200997); +#200996 = CARTESIAN_POINT('',(120.102824,-78.997798,1.585)); +#200997 = VECTOR('',#200998,1.); +#200998 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#200999 = ORIENTED_EDGE('',*,*,#201000,.T.); +#201000 = EDGE_CURVE('',#200993,#201001,#201003,.T.); +#201001 = VERTEX_POINT('',#201002); +#201002 = CARTESIAN_POINT('',(119.359597,-78.870714,1.585)); +#201003 = CIRCLE('',#201004,6.500000000091E-02); +#201004 = AXIS2_PLACEMENT_3D('',#201005,#201006,#201007); +#201005 = CARTESIAN_POINT('',(119.35959734486,-78.935714,1.585)); +#201006 = DIRECTION('',(0.,0.,-1.)); +#201007 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#201008 = ORIENTED_EDGE('',*,*,#201009,.T.); +#201009 = EDGE_CURVE('',#201001,#201010,#201012,.T.); +#201010 = VERTEX_POINT('',#201011); +#201011 = CARTESIAN_POINT('',(120.072823,-78.870714,1.585)); +#201012 = LINE('',#201013,#201014); +#201013 = CARTESIAN_POINT('',(119.359597,-78.870714,1.585)); +#201014 = VECTOR('',#201015,1.); +#201015 = DIRECTION('',(1.,0.,0.)); +#201016 = ORIENTED_EDGE('',*,*,#201017,.T.); +#201017 = EDGE_CURVE('',#201010,#201018,#201020,.T.); +#201018 = VERTEX_POINT('',#201019); +#201019 = CARTESIAN_POINT('',(120.194597,-78.74894,1.585)); +#201020 = CIRCLE('',#201021,0.170996196456); +#201021 = AXIS2_PLACEMENT_3D('',#201022,#201023,#201024); +#201022 = CARTESIAN_POINT('',(120.0292465,-78.7053635,1.585)); +#201023 = DIRECTION('',(0.,0.,1.)); +#201024 = DIRECTION('',(0.254839001704,-0.966983496866,0.)); +#201025 = ORIENTED_EDGE('',*,*,#201026,.T.); +#201026 = EDGE_CURVE('',#201018,#201027,#201029,.T.); +#201027 = VERTEX_POINT('',#201028); +#201028 = CARTESIAN_POINT('',(120.194597,-78.608201,1.585)); +#201029 = LINE('',#201030,#201031); +#201030 = CARTESIAN_POINT('',(120.194597,-78.74894,1.585)); +#201031 = VECTOR('',#201032,1.); +#201032 = DIRECTION('',(0.,1.,0.)); +#201033 = ORIENTED_EDGE('',*,*,#201034,.T.); +#201034 = EDGE_CURVE('',#201027,#201035,#201037,.T.); +#201035 = VERTEX_POINT('',#201036); +#201036 = CARTESIAN_POINT('',(120.072823,-78.486428,1.585)); +#201037 = CIRCLE('',#201038,0.170997370267); +#201038 = AXIS2_PLACEMENT_3D('',#201039,#201040,#201041); +#201039 = CARTESIAN_POINT('',(120.02924582251,-78.65177953534,1.585)); +#201040 = DIRECTION('',(0.,0.,1.)); +#201041 = DIRECTION('',(0.966980820969,0.254849155143,-0.)); +#201042 = ORIENTED_EDGE('',*,*,#201043,.T.); +#201043 = EDGE_CURVE('',#201035,#200925,#201044,.T.); +#201044 = LINE('',#201045,#201046); +#201045 = CARTESIAN_POINT('',(120.072823,-78.486428,1.585)); +#201046 = VECTOR('',#201047,1.); +#201047 = DIRECTION('',(-1.,0.,0.)); +#201048 = PLANE('',#201049); +#201049 = AXIS2_PLACEMENT_3D('',#201050,#201051,#201052); +#201050 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201051 = DIRECTION('',(0.,0.,1.)); +#201052 = DIRECTION('',(1.,0.,-0.)); +#201053 = SHELL_BASED_SURFACE_MODEL('',(#201054)); +#201054 = OPEN_SHELL('',(#201055)); +#201055 = ADVANCED_FACE('',(#201056),#201226,.T.); +#201056 = FACE_BOUND('',#201057,.F.); +#201057 = EDGE_LOOP('',(#201058,#201069,#201077,#201086,#201094,#201103, + #201111,#201119,#201127,#201136,#201144,#201153,#201161,#201170, + #201178,#201187,#201195,#201203,#201211,#201220)); +#201058 = ORIENTED_EDGE('',*,*,#201059,.T.); +#201059 = EDGE_CURVE('',#201060,#201062,#201064,.T.); +#201060 = VERTEX_POINT('',#201061); +#201061 = CARTESIAN_POINT('',(132.149349,-78.282609,1.585)); +#201062 = VERTEX_POINT('',#201063); +#201063 = CARTESIAN_POINT('',(132.241273,-78.374533,1.585)); +#201064 = CIRCLE('',#201065,6.50000837538E-02); +#201065 = AXIS2_PLACEMENT_3D('',#201066,#201067,#201068); +#201066 = CARTESIAN_POINT('',(132.19531098493,-78.32857101506,1.585)); +#201067 = DIRECTION('',(0.,0.,-1.)); +#201068 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#201069 = ORIENTED_EDGE('',*,*,#201070,.T.); +#201070 = EDGE_CURVE('',#201062,#201071,#201073,.T.); +#201071 = VERTEX_POINT('',#201072); +#201072 = CARTESIAN_POINT('',(132.209266,-78.406539,1.585)); +#201073 = LINE('',#201074,#201075); +#201074 = CARTESIAN_POINT('',(132.241273,-78.374533,1.585)); +#201075 = VECTOR('',#201076,1.); +#201076 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#201077 = ORIENTED_EDGE('',*,*,#201078,.T.); +#201078 = EDGE_CURVE('',#201071,#201079,#201081,.T.); +#201079 = VERTEX_POINT('',#201080); +#201080 = CARTESIAN_POINT('',(132.209265,-78.679172,1.585)); +#201081 = CIRCLE('',#201082,0.272201331757); +#201082 = AXIS2_PLACEMENT_3D('',#201083,#201084,#201085); +#201083 = CARTESIAN_POINT('',(132.44487402454,-78.54285636419,1.585)); +#201084 = DIRECTION('',(0.,0.,1.)); +#201085 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#201086 = ORIENTED_EDGE('',*,*,#201087,.T.); +#201087 = EDGE_CURVE('',#201079,#201088,#201090,.T.); +#201088 = VERTEX_POINT('',#201089); +#201089 = CARTESIAN_POINT('',(132.276669,-78.746578,1.585)); +#201090 = LINE('',#201091,#201092); +#201091 = CARTESIAN_POINT('',(132.209265,-78.679172,1.585)); +#201092 = VECTOR('',#201093,1.); +#201093 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#201094 = ORIENTED_EDGE('',*,*,#201095,.T.); +#201095 = EDGE_CURVE('',#201088,#201096,#201098,.T.); +#201096 = VERTEX_POINT('',#201097); +#201097 = CARTESIAN_POINT('',(132.615881,-78.820714,1.585)); +#201098 = CIRCLE('',#201099,0.553317785495); +#201099 = AXIS2_PLACEMENT_3D('',#201100,#201101,#201102); +#201100 = CARTESIAN_POINT('',(132.5584500839,-78.27038476979,1.585)); +#201101 = DIRECTION('',(0.,0.,1.)); +#201102 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#201103 = ORIENTED_EDGE('',*,*,#201104,.T.); +#201104 = EDGE_CURVE('',#201096,#201105,#201107,.T.); +#201105 = VERTEX_POINT('',#201106); +#201106 = CARTESIAN_POINT('',(132.772622,-78.781528,1.585)); +#201107 = LINE('',#201108,#201109); +#201108 = CARTESIAN_POINT('',(132.615881,-78.820714,1.585)); +#201109 = VECTOR('',#201110,1.); +#201110 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#201111 = ORIENTED_EDGE('',*,*,#201112,.T.); +#201112 = EDGE_CURVE('',#201105,#201113,#201115,.T.); +#201113 = VERTEX_POINT('',#201114); +#201114 = CARTESIAN_POINT('',(132.842522,-78.746579,1.585)); +#201115 = LINE('',#201116,#201117); +#201116 = CARTESIAN_POINT('',(132.772622,-78.781528,1.585)); +#201117 = VECTOR('',#201118,1.); +#201118 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#201119 = ORIENTED_EDGE('',*,*,#201120,.T.); +#201120 = EDGE_CURVE('',#201113,#201121,#201123,.T.); +#201121 = VERTEX_POINT('',#201122); +#201122 = CARTESIAN_POINT('',(132.909928,-78.679172,1.585)); +#201123 = LINE('',#201124,#201125); +#201124 = CARTESIAN_POINT('',(132.842522,-78.746579,1.585)); +#201125 = VECTOR('',#201126,1.); +#201126 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#201127 = ORIENTED_EDGE('',*,*,#201128,.T.); +#201128 = EDGE_CURVE('',#201121,#201129,#201131,.T.); +#201129 = VERTEX_POINT('',#201130); +#201130 = CARTESIAN_POINT('',(132.909928,-78.40654,1.585)); +#201131 = CIRCLE('',#201132,0.272194686174); +#201132 = AXIS2_PLACEMENT_3D('',#201133,#201134,#201135); +#201133 = CARTESIAN_POINT('',(132.67432686391,-78.542856,1.585)); +#201134 = DIRECTION('',(0.,-0.,1.)); +#201135 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#201136 = ORIENTED_EDGE('',*,*,#201137,.T.); +#201137 = EDGE_CURVE('',#201129,#201138,#201140,.T.); +#201138 = VERTEX_POINT('',#201139); +#201139 = CARTESIAN_POINT('',(132.877921,-78.374533,1.585)); +#201140 = LINE('',#201141,#201142); +#201141 = CARTESIAN_POINT('',(132.909928,-78.40654,1.585)); +#201142 = VECTOR('',#201143,1.); +#201143 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#201144 = ORIENTED_EDGE('',*,*,#201145,.T.); +#201145 = EDGE_CURVE('',#201138,#201146,#201148,.T.); +#201146 = VERTEX_POINT('',#201147); +#201147 = CARTESIAN_POINT('',(132.969843,-78.282609,1.585)); +#201148 = CIRCLE('',#201149,6.499937665169E-02); +#201149 = AXIS2_PLACEMENT_3D('',#201150,#201151,#201152); +#201150 = CARTESIAN_POINT('',(132.92388176676,-78.32857076677,1.585)); +#201151 = DIRECTION('',(0.,0.,-1.)); +#201152 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#201153 = ORIENTED_EDGE('',*,*,#201154,.T.); +#201154 = EDGE_CURVE('',#201146,#201155,#201157,.T.); +#201155 = VERTEX_POINT('',#201156); +#201156 = CARTESIAN_POINT('',(133.021003,-78.33789,1.585)); +#201157 = LINE('',#201158,#201159); +#201158 = CARTESIAN_POINT('',(132.969843,-78.282609,1.585)); +#201159 = VECTOR('',#201160,1.); +#201160 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#201161 = ORIENTED_EDGE('',*,*,#201162,.T.); +#201162 = EDGE_CURVE('',#201155,#201163,#201165,.T.); +#201163 = VERTEX_POINT('',#201164); +#201164 = CARTESIAN_POINT('',(133.020999,-78.747828,1.585)); +#201165 = CIRCLE('',#201166,0.409312568567); +#201166 = AXIS2_PLACEMENT_3D('',#201167,#201168,#201169); +#201167 = CARTESIAN_POINT('',(132.66670664807,-78.54285554294,1.585)); +#201168 = DIRECTION('',(0.,0.,-1.)); +#201169 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#201170 = ORIENTED_EDGE('',*,*,#201171,.T.); +#201171 = EDGE_CURVE('',#201163,#201172,#201174,.T.); +#201172 = VERTEX_POINT('',#201173); +#201173 = CARTESIAN_POINT('',(132.918322,-78.851751,1.585)); +#201174 = LINE('',#201175,#201176); +#201175 = CARTESIAN_POINT('',(133.020999,-78.747828,1.585)); +#201176 = VECTOR('',#201177,1.); +#201177 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#201178 = ORIENTED_EDGE('',*,*,#201179,.T.); +#201179 = EDGE_CURVE('',#201172,#201180,#201182,.T.); +#201180 = VERTEX_POINT('',#201181); +#201181 = CARTESIAN_POINT('',(132.479546,-78.948773,1.585)); +#201182 = CIRCLE('',#201183,0.675422176573); +#201183 = AXIS2_PLACEMENT_3D('',#201184,#201185,#201186); +#201184 = CARTESIAN_POINT('',(132.56141275007,-78.27833064465,1.585)); +#201185 = DIRECTION('',(0.,0.,-1.)); +#201186 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#201187 = ORIENTED_EDGE('',*,*,#201188,.T.); +#201188 = EDGE_CURVE('',#201180,#201189,#201191,.T.); +#201189 = VERTEX_POINT('',#201190); +#201190 = CARTESIAN_POINT('',(132.294813,-78.900995,1.585)); +#201191 = LINE('',#201192,#201193); +#201192 = CARTESIAN_POINT('',(132.479546,-78.948773,1.585)); +#201193 = VECTOR('',#201194,1.); +#201194 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#201195 = ORIENTED_EDGE('',*,*,#201196,.T.); +#201196 = EDGE_CURVE('',#201189,#201197,#201199,.T.); +#201197 = VERTEX_POINT('',#201198); +#201198 = CARTESIAN_POINT('',(132.192206,-78.845962,1.585)); +#201199 = LINE('',#201200,#201201); +#201200 = CARTESIAN_POINT('',(132.294813,-78.900995,1.585)); +#201201 = VECTOR('',#201202,1.); +#201202 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#201203 = ORIENTED_EDGE('',*,*,#201204,.T.); +#201204 = EDGE_CURVE('',#201197,#201205,#201207,.T.); +#201205 = VERTEX_POINT('',#201206); +#201206 = CARTESIAN_POINT('',(132.098191,-78.747824,1.585)); +#201207 = LINE('',#201208,#201209); +#201208 = CARTESIAN_POINT('',(132.192206,-78.845962,1.585)); +#201209 = VECTOR('',#201210,1.); +#201210 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#201211 = ORIENTED_EDGE('',*,*,#201212,.T.); +#201212 = EDGE_CURVE('',#201205,#201213,#201215,.T.); +#201213 = VERTEX_POINT('',#201214); +#201214 = CARTESIAN_POINT('',(132.098194,-78.337884,1.585)); +#201215 = CIRCLE('',#201216,0.40931290975); +#201216 = AXIS2_PLACEMENT_3D('',#201217,#201218,#201219); +#201217 = CARTESIAN_POINT('',(132.45248666757,-78.54285659277,1.585)); +#201218 = DIRECTION('',(0.,0.,-1.)); +#201219 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#201220 = ORIENTED_EDGE('',*,*,#201221,.T.); +#201221 = EDGE_CURVE('',#201213,#201060,#201222,.T.); +#201222 = LINE('',#201223,#201224); +#201223 = CARTESIAN_POINT('',(132.098194,-78.337884,1.585)); +#201224 = VECTOR('',#201225,1.); +#201225 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#201226 = PLANE('',#201227); +#201227 = AXIS2_PLACEMENT_3D('',#201228,#201229,#201230); +#201228 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201229 = DIRECTION('',(0.,0.,1.)); +#201230 = DIRECTION('',(1.,0.,-0.)); +#201231 = SHELL_BASED_SURFACE_MODEL('',(#201232)); +#201232 = OPEN_SHELL('',(#201233)); +#201233 = ADVANCED_FACE('',(#201234,#201336),#201406,.T.); +#201234 = FACE_BOUND('',#201235,.F.); +#201235 = EDGE_LOOP('',(#201236,#201246,#201255,#201263,#201271,#201280, + #201288,#201296,#201305,#201313,#201321,#201330)); +#201236 = ORIENTED_EDGE('',*,*,#201237,.T.); +#201237 = EDGE_CURVE('',#201238,#201240,#201242,.T.); +#201238 = VERTEX_POINT('',#201239); +#201239 = CARTESIAN_POINT('',(145.329472,-78.254916,1.585)); +#201240 = VERTEX_POINT('',#201241); +#201241 = CARTESIAN_POINT('',(145.352403,-78.244083,1.585)); +#201242 = LINE('',#201243,#201244); +#201243 = CARTESIAN_POINT('',(145.329472,-78.254916,1.585)); +#201244 = VECTOR('',#201245,1.); +#201245 = DIRECTION('',(0.904180546134,0.427150488695,0.)); +#201246 = ORIENTED_EDGE('',*,*,#201247,.T.); +#201247 = EDGE_CURVE('',#201240,#201248,#201250,.T.); +#201248 = VERTEX_POINT('',#201249); +#201249 = CARTESIAN_POINT('',(146.035899,-78.24709,1.585)); +#201250 = CIRCLE('',#201251,1.061569249271); +#201251 = AXIS2_PLACEMENT_3D('',#201252,#201253,#201254); +#201252 = CARTESIAN_POINT('',(145.68972936361,-79.25063165526,1.585)); +#201253 = DIRECTION('',(0.,0.,-1.)); +#201254 = DIRECTION('',(-0.317761996071,0.94817050885,0.)); +#201255 = ORIENTED_EDGE('',*,*,#201256,.T.); +#201256 = EDGE_CURVE('',#201248,#201257,#201259,.T.); +#201257 = VERTEX_POINT('',#201258); +#201258 = CARTESIAN_POINT('',(146.056987,-78.26118,1.585)); +#201259 = LINE('',#201260,#201261); +#201260 = CARTESIAN_POINT('',(146.035899,-78.24709,1.585)); +#201261 = VECTOR('',#201262,1.); +#201262 = DIRECTION('',(0.831479650115,-0.555555210078,0.)); +#201263 = ORIENTED_EDGE('',*,*,#201264,.T.); +#201264 = EDGE_CURVE('',#201257,#201265,#201267,.T.); +#201265 = VERTEX_POINT('',#201266); +#201266 = CARTESIAN_POINT('',(146.154878,-78.363787,1.585)); +#201267 = LINE('',#201268,#201269); +#201268 = CARTESIAN_POINT('',(146.056987,-78.26118,1.585)); +#201269 = VECTOR('',#201270,1.); +#201270 = DIRECTION('',(0.690283691379,-0.723538820947,0.)); +#201271 = ORIENTED_EDGE('',*,*,#201272,.T.); +#201272 = EDGE_CURVE('',#201265,#201273,#201275,.T.); +#201273 = VERTEX_POINT('',#201274); +#201274 = CARTESIAN_POINT('',(146.148491,-78.773011,1.585)); +#201275 = CIRCLE('',#201276,0.358409955812); +#201276 = AXIS2_PLACEMENT_3D('',#201277,#201278,#201279); +#201277 = CARTESIAN_POINT('',(145.85747311066,-78.56380706955,1.585)); +#201278 = DIRECTION('',(0.,0.,-1.)); +#201279 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#201280 = ORIENTED_EDGE('',*,*,#201281,.T.); +#201281 = EDGE_CURVE('',#201273,#201282,#201284,.T.); +#201282 = VERTEX_POINT('',#201283); +#201283 = CARTESIAN_POINT('',(146.049721,-78.873654,1.585)); +#201284 = LINE('',#201285,#201286); +#201285 = CARTESIAN_POINT('',(146.148491,-78.773011,1.585)); +#201286 = VECTOR('',#201287,1.); +#201287 = DIRECTION('',(-0.700434337649,-0.713716847666,0.)); +#201288 = ORIENTED_EDGE('',*,*,#201289,.T.); +#201289 = EDGE_CURVE('',#201282,#201290,#201292,.T.); +#201290 = VERTEX_POINT('',#201291); +#201291 = CARTESIAN_POINT('',(146.02679,-78.884487,1.585)); +#201292 = LINE('',#201293,#201294); +#201293 = CARTESIAN_POINT('',(146.049721,-78.873654,1.585)); +#201294 = VECTOR('',#201295,1.); +#201295 = DIRECTION('',(-0.904180546134,-0.427150488695,0.)); +#201296 = ORIENTED_EDGE('',*,*,#201297,.T.); +#201297 = EDGE_CURVE('',#201290,#201298,#201300,.T.); +#201298 = VERTEX_POINT('',#201299); +#201299 = CARTESIAN_POINT('',(145.343293,-78.88148,1.585)); +#201300 = CIRCLE('',#201301,1.051817159858); +#201301 = AXIS2_PLACEMENT_3D('',#201302,#201303,#201304); +#201302 = CARTESIAN_POINT('',(145.68941778912,-77.88824439445,1.585)); +#201303 = DIRECTION('',(-0.,0.,-1.)); +#201304 = DIRECTION('',(0.320751765371,-0.947163293742,-0.)); +#201305 = ORIENTED_EDGE('',*,*,#201306,.T.); +#201306 = EDGE_CURVE('',#201298,#201307,#201309,.T.); +#201307 = VERTEX_POINT('',#201308); +#201308 = CARTESIAN_POINT('',(145.322206,-78.86739,1.585)); +#201309 = LINE('',#201310,#201311); +#201310 = CARTESIAN_POINT('',(145.343293,-78.88148,1.585)); +#201311 = VECTOR('',#201312,1.); +#201312 = DIRECTION('',(-0.831467480074,0.555573424112,0.)); +#201313 = ORIENTED_EDGE('',*,*,#201314,.T.); +#201314 = EDGE_CURVE('',#201307,#201315,#201317,.T.); +#201315 = VERTEX_POINT('',#201316); +#201316 = CARTESIAN_POINT('',(145.224316,-78.764783,1.585)); +#201317 = LINE('',#201318,#201319); +#201318 = CARTESIAN_POINT('',(145.322206,-78.86739,1.585)); +#201319 = VECTOR('',#201320,1.); +#201320 = DIRECTION('',(-0.690279999804,0.723542342832,0.)); +#201321 = ORIENTED_EDGE('',*,*,#201322,.T.); +#201322 = EDGE_CURVE('',#201315,#201323,#201325,.T.); +#201323 = VERTEX_POINT('',#201324); +#201324 = CARTESIAN_POINT('',(145.230702,-78.355558,1.585)); +#201325 = CIRCLE('',#201326,0.358408568206); +#201326 = AXIS2_PLACEMENT_3D('',#201327,#201328,#201329); +#201327 = CARTESIAN_POINT('',(145.52171836852,-78.56476166873,1.585)); +#201328 = DIRECTION('',(0.,0.,-1.)); +#201329 = DIRECTION('',(-0.829785878205,-0.558081890345,-0.)); +#201330 = ORIENTED_EDGE('',*,*,#201331,.T.); +#201331 = EDGE_CURVE('',#201323,#201238,#201332,.T.); +#201332 = LINE('',#201333,#201334); +#201333 = CARTESIAN_POINT('',(145.230702,-78.355558,1.585)); +#201334 = VECTOR('',#201335,1.); +#201335 = DIRECTION('',(0.700437882817,0.713713368457,0.)); +#201336 = FACE_BOUND('',#201337,.F.); +#201337 = EDGE_LOOP('',(#201338,#201349,#201357,#201366,#201374,#201383, + #201391,#201400)); +#201338 = ORIENTED_EDGE('',*,*,#201339,.T.); +#201339 = EDGE_CURVE('',#201340,#201342,#201344,.T.); +#201340 = VERTEX_POINT('',#201341); +#201341 = CARTESIAN_POINT('',(145.977793,-78.365834,1.585)); +#201342 = VERTEX_POINT('',#201343); +#201343 = CARTESIAN_POINT('',(145.401399,-78.365834,1.585)); +#201344 = CIRCLE('',#201345,0.890081885265); +#201345 = AXIS2_PLACEMENT_3D('',#201346,#201347,#201348); +#201346 = CARTESIAN_POINT('',(145.689596,-79.20796715554,1.585)); +#201347 = DIRECTION('',(0.,0.,1.)); +#201348 = DIRECTION('',(0.323787063607,0.946129979147,-0.)); +#201349 = ORIENTED_EDGE('',*,*,#201350,.T.); +#201350 = EDGE_CURVE('',#201342,#201351,#201353,.T.); +#201351 = VERTEX_POINT('',#201352); +#201352 = CARTESIAN_POINT('',(145.335875,-78.431358,1.585)); +#201353 = LINE('',#201354,#201355); +#201354 = CARTESIAN_POINT('',(145.401399,-78.365834,1.585)); +#201355 = VECTOR('',#201356,1.); +#201356 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#201357 = ORIENTED_EDGE('',*,*,#201358,.T.); +#201358 = EDGE_CURVE('',#201351,#201359,#201361,.T.); +#201359 = VERTEX_POINT('',#201360); +#201360 = CARTESIAN_POINT('',(145.335875,-78.697211,1.585)); +#201361 = CIRCLE('',#201362,0.229969180036); +#201362 = AXIS2_PLACEMENT_3D('',#201363,#201364,#201365); +#201363 = CARTESIAN_POINT('',(145.52353524982,-78.5642845,1.585)); +#201364 = DIRECTION('',(0.,0.,1.)); +#201365 = DIRECTION('',(-0.816023476689,0.578018758771,0.)); +#201366 = ORIENTED_EDGE('',*,*,#201367,.T.); +#201367 = EDGE_CURVE('',#201359,#201368,#201370,.T.); +#201368 = VERTEX_POINT('',#201369); +#201369 = CARTESIAN_POINT('',(145.401399,-78.762735,1.585)); +#201370 = LINE('',#201371,#201372); +#201371 = CARTESIAN_POINT('',(145.335875,-78.697211,1.585)); +#201372 = VECTOR('',#201373,1.); +#201373 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#201374 = ORIENTED_EDGE('',*,*,#201375,.T.); +#201375 = EDGE_CURVE('',#201368,#201376,#201378,.T.); +#201376 = VERTEX_POINT('',#201377); +#201377 = CARTESIAN_POINT('',(145.977793,-78.762735,1.585)); +#201378 = CIRCLE('',#201379,0.8900591398); +#201379 = AXIS2_PLACEMENT_3D('',#201380,#201381,#201382); +#201380 = CARTESIAN_POINT('',(145.689596,-77.92062588502,1.585)); +#201381 = DIRECTION('',(0.,0.,1.)); +#201382 = DIRECTION('',(-0.323795337987,-0.946127147427,0.)); +#201383 = ORIENTED_EDGE('',*,*,#201384,.T.); +#201384 = EDGE_CURVE('',#201376,#201385,#201387,.T.); +#201385 = VERTEX_POINT('',#201386); +#201386 = CARTESIAN_POINT('',(146.043318,-78.697212,1.585)); +#201387 = LINE('',#201388,#201389); +#201388 = CARTESIAN_POINT('',(145.977793,-78.762735,1.585)); +#201389 = VECTOR('',#201390,1.); +#201390 = DIRECTION('',(0.707117572673,0.707095989535,0.)); +#201391 = ORIENTED_EDGE('',*,*,#201392,.T.); +#201392 = EDGE_CURVE('',#201385,#201393,#201395,.T.); +#201393 = VERTEX_POINT('',#201394); +#201394 = CARTESIAN_POINT('',(146.043318,-78.431357,1.585)); +#201395 = CIRCLE('',#201396,0.229967514146); +#201396 = AXIS2_PLACEMENT_3D('',#201397,#201398,#201399); +#201397 = CARTESIAN_POINT('',(145.8556605,-78.5642845,1.585)); +#201398 = DIRECTION('',(0.,-0.,1.)); +#201399 = DIRECTION('',(0.816017430535,-0.578027294393,-0.)); +#201400 = ORIENTED_EDGE('',*,*,#201401,.T.); +#201401 = EDGE_CURVE('',#201393,#201340,#201402,.T.); +#201402 = LINE('',#201403,#201404); +#201403 = CARTESIAN_POINT('',(146.043318,-78.431357,1.585)); +#201404 = VECTOR('',#201405,1.); +#201405 = DIRECTION('',(-0.707117572673,0.707095989535,0.)); +#201406 = PLANE('',#201407); +#201407 = AXIS2_PLACEMENT_3D('',#201408,#201409,#201410); +#201408 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201409 = DIRECTION('',(0.,0.,1.)); +#201410 = DIRECTION('',(1.,0.,-0.)); +#201411 = SHELL_BASED_SURFACE_MODEL('',(#201412)); +#201412 = OPEN_SHELL('',(#201413)); +#201413 = ADVANCED_FACE('',(#201414),#201584,.T.); +#201414 = FACE_BOUND('',#201415,.F.); +#201415 = EDGE_LOOP('',(#201416,#201427,#201435,#201444,#201452,#201461, + #201469,#201477,#201485,#201494,#201502,#201511,#201519,#201528, + #201536,#201545,#201553,#201561,#201569,#201578)); +#201416 = ORIENTED_EDGE('',*,*,#201417,.T.); +#201417 = EDGE_CURVE('',#201418,#201420,#201422,.T.); +#201418 = VERTEX_POINT('',#201419); +#201419 = CARTESIAN_POINT('',(134.649349,-78.218323,1.585)); +#201420 = VERTEX_POINT('',#201421); +#201421 = CARTESIAN_POINT('',(134.741273,-78.310247,1.585)); +#201422 = CIRCLE('',#201423,6.50000837538E-02); +#201423 = AXIS2_PLACEMENT_3D('',#201424,#201425,#201426); +#201424 = CARTESIAN_POINT('',(134.69531098493,-78.26428501506,1.585)); +#201425 = DIRECTION('',(0.,0.,-1.)); +#201426 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#201427 = ORIENTED_EDGE('',*,*,#201428,.T.); +#201428 = EDGE_CURVE('',#201420,#201429,#201431,.T.); +#201429 = VERTEX_POINT('',#201430); +#201430 = CARTESIAN_POINT('',(134.709266,-78.342253,1.585)); +#201431 = LINE('',#201432,#201433); +#201432 = CARTESIAN_POINT('',(134.741273,-78.310247,1.585)); +#201433 = VECTOR('',#201434,1.); +#201434 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#201435 = ORIENTED_EDGE('',*,*,#201436,.T.); +#201436 = EDGE_CURVE('',#201429,#201437,#201439,.T.); +#201437 = VERTEX_POINT('',#201438); +#201438 = CARTESIAN_POINT('',(134.709265,-78.614886,1.585)); +#201439 = CIRCLE('',#201440,0.272201331757); +#201440 = AXIS2_PLACEMENT_3D('',#201441,#201442,#201443); +#201441 = CARTESIAN_POINT('',(134.94487402454,-78.47857036419,1.585)); +#201442 = DIRECTION('',(0.,0.,1.)); +#201443 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#201444 = ORIENTED_EDGE('',*,*,#201445,.T.); +#201445 = EDGE_CURVE('',#201437,#201446,#201448,.T.); +#201446 = VERTEX_POINT('',#201447); +#201447 = CARTESIAN_POINT('',(134.776669,-78.682292,1.585)); +#201448 = LINE('',#201449,#201450); +#201449 = CARTESIAN_POINT('',(134.709265,-78.614886,1.585)); +#201450 = VECTOR('',#201451,1.); +#201451 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#201452 = ORIENTED_EDGE('',*,*,#201453,.T.); +#201453 = EDGE_CURVE('',#201446,#201454,#201456,.T.); +#201454 = VERTEX_POINT('',#201455); +#201455 = CARTESIAN_POINT('',(135.115881,-78.756428,1.585)); +#201456 = CIRCLE('',#201457,0.553317785495); +#201457 = AXIS2_PLACEMENT_3D('',#201458,#201459,#201460); +#201458 = CARTESIAN_POINT('',(135.0584500839,-78.20609876979,1.585)); +#201459 = DIRECTION('',(0.,0.,1.)); +#201460 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#201461 = ORIENTED_EDGE('',*,*,#201462,.T.); +#201462 = EDGE_CURVE('',#201454,#201463,#201465,.T.); +#201463 = VERTEX_POINT('',#201464); +#201464 = CARTESIAN_POINT('',(135.272622,-78.717242,1.585)); +#201465 = LINE('',#201466,#201467); +#201466 = CARTESIAN_POINT('',(135.115881,-78.756428,1.585)); +#201467 = VECTOR('',#201468,1.); +#201468 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#201469 = ORIENTED_EDGE('',*,*,#201470,.T.); +#201470 = EDGE_CURVE('',#201463,#201471,#201473,.T.); +#201471 = VERTEX_POINT('',#201472); +#201472 = CARTESIAN_POINT('',(135.342522,-78.682293,1.585)); +#201473 = LINE('',#201474,#201475); +#201474 = CARTESIAN_POINT('',(135.272622,-78.717242,1.585)); +#201475 = VECTOR('',#201476,1.); +#201476 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#201477 = ORIENTED_EDGE('',*,*,#201478,.T.); +#201478 = EDGE_CURVE('',#201471,#201479,#201481,.T.); +#201479 = VERTEX_POINT('',#201480); +#201480 = CARTESIAN_POINT('',(135.409928,-78.614886,1.585)); +#201481 = LINE('',#201482,#201483); +#201482 = CARTESIAN_POINT('',(135.342522,-78.682293,1.585)); +#201483 = VECTOR('',#201484,1.); +#201484 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#201485 = ORIENTED_EDGE('',*,*,#201486,.T.); +#201486 = EDGE_CURVE('',#201479,#201487,#201489,.T.); +#201487 = VERTEX_POINT('',#201488); +#201488 = CARTESIAN_POINT('',(135.409928,-78.342254,1.585)); +#201489 = CIRCLE('',#201490,0.272194686174); +#201490 = AXIS2_PLACEMENT_3D('',#201491,#201492,#201493); +#201491 = CARTESIAN_POINT('',(135.17432686391,-78.47857,1.585)); +#201492 = DIRECTION('',(0.,-0.,1.)); +#201493 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#201494 = ORIENTED_EDGE('',*,*,#201495,.T.); +#201495 = EDGE_CURVE('',#201487,#201496,#201498,.T.); +#201496 = VERTEX_POINT('',#201497); +#201497 = CARTESIAN_POINT('',(135.377921,-78.310247,1.585)); +#201498 = LINE('',#201499,#201500); +#201499 = CARTESIAN_POINT('',(135.409928,-78.342254,1.585)); +#201500 = VECTOR('',#201501,1.); +#201501 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#201502 = ORIENTED_EDGE('',*,*,#201503,.T.); +#201503 = EDGE_CURVE('',#201496,#201504,#201506,.T.); +#201504 = VERTEX_POINT('',#201505); +#201505 = CARTESIAN_POINT('',(135.469843,-78.218323,1.585)); +#201506 = CIRCLE('',#201507,6.49993766517E-02); +#201507 = AXIS2_PLACEMENT_3D('',#201508,#201509,#201510); +#201508 = CARTESIAN_POINT('',(135.42388176676,-78.26428476677,1.585)); +#201509 = DIRECTION('',(0.,0.,-1.)); +#201510 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#201511 = ORIENTED_EDGE('',*,*,#201512,.T.); +#201512 = EDGE_CURVE('',#201504,#201513,#201515,.T.); +#201513 = VERTEX_POINT('',#201514); +#201514 = CARTESIAN_POINT('',(135.521003,-78.273604,1.585)); +#201515 = LINE('',#201516,#201517); +#201516 = CARTESIAN_POINT('',(135.469843,-78.218323,1.585)); +#201517 = VECTOR('',#201518,1.); +#201518 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#201519 = ORIENTED_EDGE('',*,*,#201520,.T.); +#201520 = EDGE_CURVE('',#201513,#201521,#201523,.T.); +#201521 = VERTEX_POINT('',#201522); +#201522 = CARTESIAN_POINT('',(135.520999,-78.683542,1.585)); +#201523 = CIRCLE('',#201524,0.409312568567); +#201524 = AXIS2_PLACEMENT_3D('',#201525,#201526,#201527); +#201525 = CARTESIAN_POINT('',(135.16670664807,-78.47856954294,1.585)); +#201526 = DIRECTION('',(0.,0.,-1.)); +#201527 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#201528 = ORIENTED_EDGE('',*,*,#201529,.T.); +#201529 = EDGE_CURVE('',#201521,#201530,#201532,.T.); +#201530 = VERTEX_POINT('',#201531); +#201531 = CARTESIAN_POINT('',(135.418322,-78.787465,1.585)); +#201532 = LINE('',#201533,#201534); +#201533 = CARTESIAN_POINT('',(135.520999,-78.683542,1.585)); +#201534 = VECTOR('',#201535,1.); +#201535 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#201536 = ORIENTED_EDGE('',*,*,#201537,.T.); +#201537 = EDGE_CURVE('',#201530,#201538,#201540,.T.); +#201538 = VERTEX_POINT('',#201539); +#201539 = CARTESIAN_POINT('',(134.979546,-78.884487,1.585)); +#201540 = CIRCLE('',#201541,0.675422176573); +#201541 = AXIS2_PLACEMENT_3D('',#201542,#201543,#201544); +#201542 = CARTESIAN_POINT('',(135.06141275007,-78.21404464465,1.585)); +#201543 = DIRECTION('',(0.,0.,-1.)); +#201544 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#201545 = ORIENTED_EDGE('',*,*,#201546,.T.); +#201546 = EDGE_CURVE('',#201538,#201547,#201549,.T.); +#201547 = VERTEX_POINT('',#201548); +#201548 = CARTESIAN_POINT('',(134.794813,-78.836709,1.585)); +#201549 = LINE('',#201550,#201551); +#201550 = CARTESIAN_POINT('',(134.979546,-78.884487,1.585)); +#201551 = VECTOR('',#201552,1.); +#201552 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#201553 = ORIENTED_EDGE('',*,*,#201554,.T.); +#201554 = EDGE_CURVE('',#201547,#201555,#201557,.T.); +#201555 = VERTEX_POINT('',#201556); +#201556 = CARTESIAN_POINT('',(134.692206,-78.781676,1.585)); +#201557 = LINE('',#201558,#201559); +#201558 = CARTESIAN_POINT('',(134.794813,-78.836709,1.585)); +#201559 = VECTOR('',#201560,1.); +#201560 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#201561 = ORIENTED_EDGE('',*,*,#201562,.T.); +#201562 = EDGE_CURVE('',#201555,#201563,#201565,.T.); +#201563 = VERTEX_POINT('',#201564); +#201564 = CARTESIAN_POINT('',(134.598191,-78.683538,1.585)); +#201565 = LINE('',#201566,#201567); +#201566 = CARTESIAN_POINT('',(134.692206,-78.781676,1.585)); +#201567 = VECTOR('',#201568,1.); +#201568 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#201569 = ORIENTED_EDGE('',*,*,#201570,.T.); +#201570 = EDGE_CURVE('',#201563,#201571,#201573,.T.); +#201571 = VERTEX_POINT('',#201572); +#201572 = CARTESIAN_POINT('',(134.598194,-78.273598,1.585)); +#201573 = CIRCLE('',#201574,0.40931290975); +#201574 = AXIS2_PLACEMENT_3D('',#201575,#201576,#201577); +#201575 = CARTESIAN_POINT('',(134.95248666757,-78.47857059277,1.585)); +#201576 = DIRECTION('',(0.,0.,-1.)); +#201577 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#201578 = ORIENTED_EDGE('',*,*,#201579,.T.); +#201579 = EDGE_CURVE('',#201571,#201418,#201580,.T.); +#201580 = LINE('',#201581,#201582); +#201581 = CARTESIAN_POINT('',(134.598194,-78.273598,1.585)); +#201582 = VECTOR('',#201583,1.); +#201583 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#201584 = PLANE('',#201585); +#201585 = AXIS2_PLACEMENT_3D('',#201586,#201587,#201588); +#201586 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201587 = DIRECTION('',(0.,0.,1.)); +#201588 = DIRECTION('',(1.,0.,-0.)); +#201589 = SHELL_BASED_SURFACE_MODEL('',(#201590)); +#201590 = OPEN_SHELL('',(#201591)); +#201591 = ADVANCED_FACE('',(#201592,#201693),#201768,.T.); +#201592 = FACE_BOUND('',#201593,.F.); +#201593 = EDGE_LOOP('',(#201594,#201605,#201613,#201621,#201629,#201637, + #201645,#201654,#201662,#201671,#201679,#201687)); +#201594 = ORIENTED_EDGE('',*,*,#201595,.T.); +#201595 = EDGE_CURVE('',#201596,#201598,#201600,.T.); +#201596 = VERTEX_POINT('',#201597); +#201597 = CARTESIAN_POINT('',(113.33087,-77.983961,1.585)); +#201598 = VERTEX_POINT('',#201599); +#201599 = CARTESIAN_POINT('',(113.761693,-77.886552,1.585)); +#201600 = CIRCLE('',#201601,0.670538401945); +#201601 = AXIS2_PLACEMENT_3D('',#201602,#201603,#201604); +#201602 = CARTESIAN_POINT('',(113.68590657351,-78.55279382249,1.585)); +#201603 = DIRECTION('',(0.,0.,-1.)); +#201604 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#201605 = ORIENTED_EDGE('',*,*,#201606,.T.); +#201606 = EDGE_CURVE('',#201598,#201607,#201609,.T.); +#201607 = VERTEX_POINT('',#201608); +#201608 = CARTESIAN_POINT('',(113.95438,-77.934718,1.585)); +#201609 = LINE('',#201610,#201611); +#201610 = CARTESIAN_POINT('',(113.761693,-77.886552,1.585)); +#201611 = VECTOR('',#201612,1.); +#201612 = DIRECTION('',(0.970149311613,-0.242508377541,0.)); +#201613 = ORIENTED_EDGE('',*,*,#201614,.T.); +#201614 = EDGE_CURVE('',#201607,#201615,#201617,.T.); +#201615 = VERTEX_POINT('',#201616); +#201616 = CARTESIAN_POINT('',(114.056987,-77.989751,1.585)); +#201617 = LINE('',#201618,#201619); +#201618 = CARTESIAN_POINT('',(113.95438,-77.934718,1.585)); +#201619 = VECTOR('',#201620,1.); +#201620 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#201621 = ORIENTED_EDGE('',*,*,#201622,.T.); +#201622 = EDGE_CURVE('',#201615,#201623,#201625,.T.); +#201623 = VERTEX_POINT('',#201624); +#201624 = CARTESIAN_POINT('',(114.150999,-78.087884,1.585)); +#201625 = LINE('',#201626,#201627); +#201626 = CARTESIAN_POINT('',(114.056987,-77.989751,1.585)); +#201627 = VECTOR('',#201628,1.); +#201628 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#201629 = ORIENTED_EDGE('',*,*,#201630,.T.); +#201630 = EDGE_CURVE('',#201623,#201631,#201633,.T.); +#201631 = VERTEX_POINT('',#201632); +#201632 = CARTESIAN_POINT('',(114.202563,-78.239776,1.585)); +#201633 = LINE('',#201634,#201635); +#201634 = CARTESIAN_POINT('',(114.150999,-78.087884,1.585)); +#201635 = VECTOR('',#201636,1.); +#201636 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#201637 = ORIENTED_EDGE('',*,*,#201638,.T.); +#201638 = EDGE_CURVE('',#201631,#201639,#201641,.T.); +#201639 = VERTEX_POINT('',#201640); +#201640 = CARTESIAN_POINT('',(114.204597,-78.464285,1.585)); +#201641 = LINE('',#201642,#201643); +#201642 = CARTESIAN_POINT('',(114.202563,-78.239776,1.585)); +#201643 = VECTOR('',#201644,1.); +#201644 = DIRECTION('',(9.05939864485E-03,-0.999958962806,0.)); +#201645 = ORIENTED_EDGE('',*,*,#201646,.T.); +#201646 = EDGE_CURVE('',#201639,#201647,#201649,.T.); +#201647 = VERTEX_POINT('',#201648); +#201648 = CARTESIAN_POINT('',(114.139597,-78.529285,1.585)); +#201649 = CIRCLE('',#201650,6.500103935393E-02); +#201650 = AXIS2_PLACEMENT_3D('',#201651,#201652,#201653); +#201651 = CARTESIAN_POINT('',(114.13959596065,-78.46428396065,1.585)); +#201652 = DIRECTION('',(0.,0.,-1.)); +#201653 = DIRECTION('',(0.999999999872,-1.598967714806E-05,0.)); +#201654 = ORIENTED_EDGE('',*,*,#201655,.T.); +#201655 = EDGE_CURVE('',#201647,#201656,#201658,.T.); +#201656 = VERTEX_POINT('',#201657); +#201657 = CARTESIAN_POINT('',(113.239597,-78.529285,1.585)); +#201658 = LINE('',#201659,#201660); +#201659 = CARTESIAN_POINT('',(114.139597,-78.529285,1.585)); +#201660 = VECTOR('',#201661,1.); +#201661 = DIRECTION('',(-1.,0.,0.)); +#201662 = ORIENTED_EDGE('',*,*,#201663,.T.); +#201663 = EDGE_CURVE('',#201656,#201664,#201666,.T.); +#201664 = VERTEX_POINT('',#201665); +#201665 = CARTESIAN_POINT('',(113.174597,-78.464285,1.585)); +#201666 = CIRCLE('',#201667,6.500103935388E-02); +#201667 = AXIS2_PLACEMENT_3D('',#201668,#201669,#201670); +#201668 = CARTESIAN_POINT('',(113.23959803934,-78.46428396065,1.585)); +#201669 = DIRECTION('',(0.,0.,-1.)); +#201670 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#201671 = ORIENTED_EDGE('',*,*,#201672,.T.); +#201672 = EDGE_CURVE('',#201664,#201673,#201675,.T.); +#201673 = VERTEX_POINT('',#201674); +#201674 = CARTESIAN_POINT('',(113.17663,-78.239776,1.585)); +#201675 = LINE('',#201676,#201677); +#201676 = CARTESIAN_POINT('',(113.174597,-78.464285,1.585)); +#201677 = VECTOR('',#201678,1.); +#201678 = DIRECTION('',(9.054945028444E-03,0.999959003145,0.)); +#201679 = ORIENTED_EDGE('',*,*,#201680,.T.); +#201680 = EDGE_CURVE('',#201673,#201681,#201683,.T.); +#201681 = VERTEX_POINT('',#201682); +#201682 = CARTESIAN_POINT('',(113.228191,-78.087888,1.585)); +#201683 = LINE('',#201684,#201685); +#201684 = CARTESIAN_POINT('',(113.17663,-78.239776,1.585)); +#201685 = VECTOR('',#201686,1.); +#201686 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#201687 = ORIENTED_EDGE('',*,*,#201688,.T.); +#201688 = EDGE_CURVE('',#201681,#201596,#201689,.T.); +#201689 = LINE('',#201690,#201691); +#201690 = CARTESIAN_POINT('',(113.228191,-78.087888,1.585)); +#201691 = VECTOR('',#201692,1.); +#201692 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#201693 = FACE_BOUND('',#201694,.F.); +#201694 = EDGE_LOOP('',(#201695,#201706,#201714,#201722,#201730,#201738, + #201746,#201754,#201762)); +#201695 = ORIENTED_EDGE('',*,*,#201696,.T.); +#201696 = EDGE_CURVE('',#201697,#201699,#201701,.T.); +#201697 = VERTEX_POINT('',#201698); +#201698 = CARTESIAN_POINT('',(113.902622,-78.054184,1.585)); +#201699 = VERTEX_POINT('',#201700); +#201700 = CARTESIAN_POINT('',(113.406669,-78.089134,1.585)); +#201701 = CIRCLE('',#201702,0.559258743581); +#201702 = AXIS2_PLACEMENT_3D('',#201703,#201704,#201705); +#201703 = CARTESIAN_POINT('',(113.68986183298,-78.57139136035,1.585)); +#201704 = DIRECTION('',(0.,0.,1.)); +#201705 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#201706 = ORIENTED_EDGE('',*,*,#201707,.T.); +#201707 = EDGE_CURVE('',#201699,#201708,#201710,.T.); +#201708 = VERTEX_POINT('',#201709); +#201709 = CARTESIAN_POINT('',(113.339265,-78.15654,1.585)); +#201710 = LINE('',#201711,#201712); +#201711 = CARTESIAN_POINT('',(113.406669,-78.089134,1.585)); +#201712 = VECTOR('',#201713,1.); +#201713 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#201714 = ORIENTED_EDGE('',*,*,#201715,.T.); +#201715 = EDGE_CURVE('',#201708,#201716,#201718,.T.); +#201716 = VERTEX_POINT('',#201717); +#201717 = CARTESIAN_POINT('',(113.304597,-78.260546,1.585)); +#201718 = LINE('',#201719,#201720); +#201719 = CARTESIAN_POINT('',(113.339265,-78.15654,1.585)); +#201720 = VECTOR('',#201721,1.); +#201721 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#201722 = ORIENTED_EDGE('',*,*,#201723,.T.); +#201723 = EDGE_CURVE('',#201716,#201724,#201726,.T.); +#201724 = VERTEX_POINT('',#201725); +#201725 = CARTESIAN_POINT('',(113.304597,-78.399285,1.585)); +#201726 = LINE('',#201727,#201728); +#201727 = CARTESIAN_POINT('',(113.304597,-78.260546,1.585)); +#201728 = VECTOR('',#201729,1.); +#201729 = DIRECTION('',(0.,-1.,0.)); +#201730 = ORIENTED_EDGE('',*,*,#201731,.T.); +#201731 = EDGE_CURVE('',#201724,#201732,#201734,.T.); +#201732 = VERTEX_POINT('',#201733); +#201733 = CARTESIAN_POINT('',(114.074597,-78.399285,1.585)); +#201734 = LINE('',#201735,#201736); +#201735 = CARTESIAN_POINT('',(113.304597,-78.399285,1.585)); +#201736 = VECTOR('',#201737,1.); +#201737 = DIRECTION('',(1.,0.,0.)); +#201738 = ORIENTED_EDGE('',*,*,#201739,.T.); +#201739 = EDGE_CURVE('',#201732,#201740,#201742,.T.); +#201740 = VERTEX_POINT('',#201741); +#201741 = CARTESIAN_POINT('',(114.074597,-78.260546,1.585)); +#201742 = LINE('',#201743,#201744); +#201743 = CARTESIAN_POINT('',(114.074597,-78.399285,1.585)); +#201744 = VECTOR('',#201745,1.); +#201745 = DIRECTION('',(0.,1.,0.)); +#201746 = ORIENTED_EDGE('',*,*,#201747,.T.); +#201747 = EDGE_CURVE('',#201740,#201748,#201750,.T.); +#201748 = VERTEX_POINT('',#201749); +#201749 = CARTESIAN_POINT('',(114.039928,-78.15654,1.585)); +#201750 = LINE('',#201751,#201752); +#201751 = CARTESIAN_POINT('',(114.074597,-78.260546,1.585)); +#201752 = VECTOR('',#201753,1.); +#201753 = DIRECTION('',(-0.316230502441,0.948682385905,0.)); +#201754 = ORIENTED_EDGE('',*,*,#201755,.T.); +#201755 = EDGE_CURVE('',#201748,#201756,#201758,.T.); +#201756 = VERTEX_POINT('',#201757); +#201757 = CARTESIAN_POINT('',(113.972522,-78.089134,1.585)); +#201758 = LINE('',#201759,#201760); +#201759 = CARTESIAN_POINT('',(114.039928,-78.15654,1.585)); +#201760 = VECTOR('',#201761,1.); +#201761 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#201762 = ORIENTED_EDGE('',*,*,#201763,.T.); +#201763 = EDGE_CURVE('',#201756,#201697,#201764,.T.); +#201764 = LINE('',#201765,#201766); +#201765 = CARTESIAN_POINT('',(113.972522,-78.089134,1.585)); +#201766 = VECTOR('',#201767,1.); +#201767 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#201768 = PLANE('',#201769); +#201769 = AXIS2_PLACEMENT_3D('',#201770,#201771,#201772); +#201770 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201771 = DIRECTION('',(0.,0.,1.)); +#201772 = DIRECTION('',(1.,0.,-0.)); +#201773 = SHELL_BASED_SURFACE_MODEL('',(#201774)); +#201774 = OPEN_SHELL('',(#201775)); +#201775 = ADVANCED_FACE('',(#201776),#201812,.T.); +#201776 = FACE_BOUND('',#201777,.F.); +#201777 = EDGE_LOOP('',(#201778,#201789,#201797,#201806)); +#201778 = ORIENTED_EDGE('',*,*,#201779,.T.); +#201779 = EDGE_CURVE('',#201780,#201782,#201784,.T.); +#201780 = VERTEX_POINT('',#201781); +#201781 = CARTESIAN_POINT('',(82.683526,-78.435214,1.585)); +#201782 = VERTEX_POINT('',#201783); +#201783 = CARTESIAN_POINT('',(82.683526,-78.140978,1.585)); +#201784 = CIRCLE('',#201785,0.150000292066); +#201785 = AXIS2_PLACEMENT_3D('',#201786,#201787,#201788); +#201786 = CARTESIAN_POINT('',(82.71279,-78.288096,1.585)); +#201787 = DIRECTION('',(0.,0.,-1.)); +#201788 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#201789 = ORIENTED_EDGE('',*,*,#201790,.T.); +#201790 = EDGE_CURVE('',#201782,#201791,#201793,.T.); +#201791 = VERTEX_POINT('',#201792); +#201792 = CARTESIAN_POINT('',(85.342054,-78.140978,1.585)); +#201793 = LINE('',#201794,#201795); +#201794 = CARTESIAN_POINT('',(82.683526,-78.140978,1.585)); +#201795 = VECTOR('',#201796,1.); +#201796 = DIRECTION('',(1.,0.,0.)); +#201797 = ORIENTED_EDGE('',*,*,#201798,.T.); +#201798 = EDGE_CURVE('',#201791,#201799,#201801,.T.); +#201799 = VERTEX_POINT('',#201800); +#201800 = CARTESIAN_POINT('',(85.342054,-78.435214,1.585)); +#201801 = CIRCLE('',#201802,0.150000292066); +#201802 = AXIS2_PLACEMENT_3D('',#201803,#201804,#201805); +#201803 = CARTESIAN_POINT('',(85.31279,-78.288096,1.585)); +#201804 = DIRECTION('',(0.,0.,-1.)); +#201805 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#201806 = ORIENTED_EDGE('',*,*,#201807,.T.); +#201807 = EDGE_CURVE('',#201799,#201780,#201808,.T.); +#201808 = LINE('',#201809,#201810); +#201809 = CARTESIAN_POINT('',(85.342054,-78.435214,1.585)); +#201810 = VECTOR('',#201811,1.); +#201811 = DIRECTION('',(-1.,0.,0.)); +#201812 = PLANE('',#201813); +#201813 = AXIS2_PLACEMENT_3D('',#201814,#201815,#201816); +#201814 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201815 = DIRECTION('',(0.,0.,1.)); +#201816 = DIRECTION('',(1.,0.,-0.)); +#201817 = SHELL_BASED_SURFACE_MODEL('',(#201818)); +#201818 = OPEN_SHELL('',(#201819)); +#201819 = ADVANCED_FACE('',(#201820),#201864,.T.); +#201820 = FACE_BOUND('',#201821,.F.); +#201821 = EDGE_LOOP('',(#201822,#201833,#201841,#201850,#201858)); +#201822 = ORIENTED_EDGE('',*,*,#201823,.T.); +#201823 = EDGE_CURVE('',#201824,#201826,#201828,.T.); +#201824 = VERTEX_POINT('',#201825); +#201825 = CARTESIAN_POINT('',(122.406688,-77.589412,1.585)); +#201826 = VERTEX_POINT('',#201827); +#201827 = CARTESIAN_POINT('',(122.53174,-77.614286,1.585)); +#201828 = CIRCLE('',#201829,6.499988811648E-02); +#201829 = AXIS2_PLACEMENT_3D('',#201830,#201831,#201832); +#201830 = CARTESIAN_POINT('',(122.46674011188,-77.6142862701,1.585)); +#201831 = DIRECTION('',(0.,0.,-1.)); +#201832 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#201833 = ORIENTED_EDGE('',*,*,#201834,.T.); +#201834 = EDGE_CURVE('',#201826,#201835,#201837,.T.); +#201835 = VERTEX_POINT('',#201836); +#201836 = CARTESIAN_POINT('',(122.53174,-78.3,1.585)); +#201837 = LINE('',#201838,#201839); +#201838 = CARTESIAN_POINT('',(122.53174,-77.614286,1.585)); +#201839 = VECTOR('',#201840,1.); +#201840 = DIRECTION('',(0.,-1.,0.)); +#201841 = ORIENTED_EDGE('',*,*,#201842,.T.); +#201842 = EDGE_CURVE('',#201835,#201843,#201845,.T.); +#201843 = VERTEX_POINT('',#201844); +#201844 = CARTESIAN_POINT('',(122.40174,-78.3,1.585)); +#201845 = CIRCLE('',#201846,6.500000000091E-02); +#201846 = AXIS2_PLACEMENT_3D('',#201847,#201848,#201849); +#201847 = CARTESIAN_POINT('',(122.46674,-78.29999965513,1.585)); +#201848 = DIRECTION('',(-0.,0.,-1.)); +#201849 = DIRECTION('',(0.999999999986,-5.305658025668E-06,-0.)); +#201850 = ORIENTED_EDGE('',*,*,#201851,.T.); +#201851 = EDGE_CURVE('',#201843,#201852,#201854,.T.); +#201852 = VERTEX_POINT('',#201853); +#201853 = CARTESIAN_POINT('',(122.40174,-77.614286,1.585)); +#201854 = LINE('',#201855,#201856); +#201855 = CARTESIAN_POINT('',(122.40174,-78.3,1.585)); +#201856 = VECTOR('',#201857,1.); +#201857 = DIRECTION('',(0.,1.,0.)); +#201858 = ORIENTED_EDGE('',*,*,#201859,.T.); +#201859 = EDGE_CURVE('',#201852,#201824,#201860,.T.); +#201860 = LINE('',#201861,#201862); +#201861 = CARTESIAN_POINT('',(122.40174,-77.614286,1.585)); +#201862 = VECTOR('',#201863,1.); +#201863 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#201864 = PLANE('',#201865); +#201865 = AXIS2_PLACEMENT_3D('',#201866,#201867,#201868); +#201866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#201867 = DIRECTION('',(0.,0.,1.)); +#201868 = DIRECTION('',(1.,0.,-0.)); +#201869 = SHELL_BASED_SURFACE_MODEL('',(#201870)); +#201870 = OPEN_SHELL('',(#201871)); +#201871 = ADVANCED_FACE('',(#201872,#201974),#202076,.T.); +#201872 = FACE_BOUND('',#201873,.F.); +#201873 = EDGE_LOOP('',(#201874,#201884,#201893,#201901,#201909,#201918, + #201926,#201934,#201943,#201951,#201959,#201968)); +#201874 = ORIENTED_EDGE('',*,*,#201875,.T.); +#201875 = EDGE_CURVE('',#201876,#201878,#201880,.T.); +#201876 = VERTEX_POINT('',#201877); +#201877 = CARTESIAN_POINT('',(206.126866,-77.593315,1.585)); +#201878 = VERTEX_POINT('',#201879); +#201879 = CARTESIAN_POINT('',(206.243755,-77.536053,1.585)); +#201880 = LINE('',#201881,#201882); +#201881 = CARTESIAN_POINT('',(206.126866,-77.593315,1.585)); +#201882 = VECTOR('',#201883,1.); +#201883 = DIRECTION('',(0.898031613354,0.439930928007,0.)); +#201884 = ORIENTED_EDGE('',*,*,#201885,.T.); +#201885 = EDGE_CURVE('',#201878,#201886,#201888,.T.); +#201886 = VERTEX_POINT('',#201887); +#201887 = CARTESIAN_POINT('',(206.914533,-77.541732,1.585)); +#201888 = CIRCLE('',#201889,0.965975843555); +#201889 = AXIS2_PLACEMENT_3D('',#201890,#201891,#201892); +#201890 = CARTESIAN_POINT('',(206.57147484794,-78.44473833145,1.585)); +#201891 = DIRECTION('',(0.,0.,-1.)); +#201892 = DIRECTION('',(-0.339262984817,0.940691568546,0.)); +#201893 = ORIENTED_EDGE('',*,*,#201894,.T.); +#201894 = EDGE_CURVE('',#201886,#201895,#201897,.T.); +#201895 = VERTEX_POINT('',#201896); +#201896 = CARTESIAN_POINT('',(207.023513,-77.598681,1.585)); +#201897 = LINE('',#201898,#201899); +#201898 = CARTESIAN_POINT('',(206.914533,-77.541732,1.585)); +#201899 = VECTOR('',#201900,1.); +#201900 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#201901 = ORIENTED_EDGE('',*,*,#201902,.T.); +#201902 = EDGE_CURVE('',#201895,#201903,#201905,.T.); +#201903 = VERTEX_POINT('',#201904); +#201904 = CARTESIAN_POINT('',(207.086967,-77.664211,1.585)); +#201905 = LINE('',#201906,#201907); +#201906 = CARTESIAN_POINT('',(207.023513,-77.598681,1.585)); +#201907 = VECTOR('',#201908,1.); +#201908 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#201909 = ORIENTED_EDGE('',*,*,#201910,.T.); +#201910 = EDGE_CURVE('',#201903,#201911,#201913,.T.); +#201911 = VERTEX_POINT('',#201912); +#201912 = CARTESIAN_POINT('',(207.0816,-78.03705,1.585)); +#201913 = CIRCLE('',#201914,0.290999070188); +#201914 = AXIS2_PLACEMENT_3D('',#201915,#201916,#201917); +#201915 = CARTESIAN_POINT('',(206.86087650487,-77.84741456673,1.585)); +#201916 = DIRECTION('',(0.,0.,-1.)); +#201917 = DIRECTION('',(0.776945764738,0.629567533038,0.)); +#201918 = ORIENTED_EDGE('',*,*,#201919,.T.); +#201919 = EDGE_CURVE('',#201911,#201920,#201922,.T.); +#201920 = VERTEX_POINT('',#201921); +#201921 = CARTESIAN_POINT('',(207.016067,-78.100503,1.585)); +#201922 = LINE('',#201923,#201924); +#201923 = CARTESIAN_POINT('',(207.0816,-78.03705,1.585)); +#201924 = VECTOR('',#201925,1.); +#201925 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#201926 = ORIENTED_EDGE('',*,*,#201927,.T.); +#201927 = EDGE_CURVE('',#201920,#201928,#201930,.T.); +#201928 = VERTEX_POINT('',#201929); +#201929 = CARTESIAN_POINT('',(206.899182,-78.157765,1.585)); +#201930 = LINE('',#201931,#201932); +#201931 = CARTESIAN_POINT('',(207.016067,-78.100503,1.585)); +#201932 = VECTOR('',#201933,1.); +#201933 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#201934 = ORIENTED_EDGE('',*,*,#201935,.T.); +#201935 = EDGE_CURVE('',#201928,#201936,#201938,.T.); +#201936 = VERTEX_POINT('',#201937); +#201937 = CARTESIAN_POINT('',(206.228404,-78.152086,1.585)); +#201938 = CIRCLE('',#201939,0.967158496826); +#201939 = AXIS2_PLACEMENT_3D('',#201940,#201941,#201942); +#201940 = CARTESIAN_POINT('',(206.57147282772,-77.24781870686,1.585)); +#201941 = DIRECTION('',(-0.,0.,-1.)); +#201942 = DIRECTION('',(0.338837091703,-0.940845059128,-0.)); +#201943 = ORIENTED_EDGE('',*,*,#201944,.T.); +#201944 = EDGE_CURVE('',#201936,#201945,#201947,.T.); +#201945 = VERTEX_POINT('',#201946); +#201946 = CARTESIAN_POINT('',(206.119423,-78.095136,1.585)); +#201947 = LINE('',#201948,#201949); +#201948 = CARTESIAN_POINT('',(206.228404,-78.152086,1.585)); +#201949 = VECTOR('',#201950,1.); +#201950 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#201951 = ORIENTED_EDGE('',*,*,#201952,.T.); +#201952 = EDGE_CURVE('',#201945,#201953,#201955,.T.); +#201953 = VERTEX_POINT('',#201954); +#201954 = CARTESIAN_POINT('',(206.05597,-78.029606,1.585)); +#201955 = LINE('',#201956,#201957); +#201956 = CARTESIAN_POINT('',(206.119423,-78.095136,1.585)); +#201957 = VECTOR('',#201958,1.); +#201958 = DIRECTION('',(-0.695630129574,0.718400113327,0.)); +#201959 = ORIENTED_EDGE('',*,*,#201960,.T.); +#201960 = EDGE_CURVE('',#201953,#201961,#201963,.T.); +#201961 = VERTEX_POINT('',#201962); +#201962 = CARTESIAN_POINT('',(206.061336,-77.656768,1.585)); +#201963 = CIRCLE('',#201964,0.291002094877); +#201964 = AXIS2_PLACEMENT_3D('',#201965,#201966,#201967); +#201965 = CARTESIAN_POINT('',(206.28206436573,-77.84640240558,1.585)); +#201966 = DIRECTION('',(0.,0.,-1.)); +#201967 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#201968 = ORIENTED_EDGE('',*,*,#201969,.T.); +#201969 = EDGE_CURVE('',#201961,#201876,#201970,.T.); +#201970 = LINE('',#201971,#201972); +#201971 = CARTESIAN_POINT('',(206.061336,-77.656768,1.585)); +#201972 = VECTOR('',#201973,1.); +#201973 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#201974 = FACE_BOUND('',#201975,.F.); +#201975 = EDGE_LOOP('',(#201976,#201987,#201995,#202003,#202012,#202020, + #202028,#202037,#202045,#202053,#202062,#202070)); +#201976 = ORIENTED_EDGE('',*,*,#201977,.T.); +#201977 = EDGE_CURVE('',#201978,#201980,#201982,.T.); +#201978 = VERTEX_POINT('',#201979); +#201979 = CARTESIAN_POINT('',(206.854816,-77.679578,1.585)); +#201980 = VERTEX_POINT('',#201981); +#201981 = CARTESIAN_POINT('',(206.288121,-77.679578,1.585)); +#201982 = CIRCLE('',#201983,0.815450468383); +#201983 = AXIS2_PLACEMENT_3D('',#201984,#201985,#201986); +#201984 = CARTESIAN_POINT('',(206.5714685,-78.44421756255,1.585)); +#201985 = DIRECTION('',(0.,0.,1.)); +#201986 = DIRECTION('',(0.347473587895,0.937689770508,-0.)); +#201987 = ORIENTED_EDGE('',*,*,#201988,.T.); +#201988 = EDGE_CURVE('',#201980,#201989,#201991,.T.); +#201989 = VERTEX_POINT('',#201990); +#201990 = CARTESIAN_POINT('',(206.211134,-77.718072,1.585)); +#201991 = LINE('',#201992,#201993); +#201992 = CARTESIAN_POINT('',(206.288121,-77.679578,1.585)); +#201993 = VECTOR('',#201994,1.); +#201994 = DIRECTION('',(-0.894424867414,-0.447218242641,0.)); +#201995 = ORIENTED_EDGE('',*,*,#201996,.T.); +#201996 = EDGE_CURVE('',#201989,#201997,#201999,.T.); +#201997 = VERTEX_POINT('',#201998); +#201998 = CARTESIAN_POINT('',(206.180727,-77.748479,1.585)); +#201999 = LINE('',#202000,#202001); +#202000 = CARTESIAN_POINT('',(206.211134,-77.718072,1.585)); +#202001 = VECTOR('',#202002,1.); +#202002 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#202003 = ORIENTED_EDGE('',*,*,#202004,.T.); +#202004 = EDGE_CURVE('',#201997,#202005,#202007,.T.); +#202005 = VERTEX_POINT('',#202006); +#202006 = CARTESIAN_POINT('',(206.180727,-77.945339,1.585)); +#202007 = CIRCLE('',#202008,0.148516804184); +#202008 = AXIS2_PLACEMENT_3D('',#202009,#202010,#202011); +#202009 = CARTESIAN_POINT('',(206.291942,-77.846909,1.585)); +#202010 = DIRECTION('',(0.,0.,1.)); +#202011 = DIRECTION('',(-0.748837820819,0.662753286006,0.)); +#202012 = ORIENTED_EDGE('',*,*,#202013,.T.); +#202013 = EDGE_CURVE('',#202005,#202014,#202016,.T.); +#202014 = VERTEX_POINT('',#202015); +#202015 = CARTESIAN_POINT('',(206.211134,-77.975746,1.585)); +#202016 = LINE('',#202017,#202018); +#202017 = CARTESIAN_POINT('',(206.180727,-77.945339,1.585)); +#202018 = VECTOR('',#202019,1.); +#202019 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#202020 = ORIENTED_EDGE('',*,*,#202021,.T.); +#202021 = EDGE_CURVE('',#202014,#202022,#202024,.T.); +#202022 = VERTEX_POINT('',#202023); +#202023 = CARTESIAN_POINT('',(206.288121,-78.014239,1.585)); +#202024 = LINE('',#202025,#202026); +#202025 = CARTESIAN_POINT('',(206.211134,-77.975746,1.585)); +#202026 = VECTOR('',#202027,1.); +#202027 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#202028 = ORIENTED_EDGE('',*,*,#202029,.T.); +#202029 = EDGE_CURVE('',#202022,#202030,#202032,.T.); +#202030 = VERTEX_POINT('',#202031); +#202031 = CARTESIAN_POINT('',(206.854816,-78.014239,1.585)); +#202032 = CIRCLE('',#202033,0.815433004022); +#202033 = AXIS2_PLACEMENT_3D('',#202034,#202035,#202036); +#202034 = CARTESIAN_POINT('',(206.5714685,-77.24961806235,1.585)); +#202035 = DIRECTION('',(0.,0.,1.)); +#202036 = DIRECTION('',(-0.347481029836,-0.937687012763,0.)); +#202037 = ORIENTED_EDGE('',*,*,#202038,.T.); +#202038 = EDGE_CURVE('',#202030,#202039,#202041,.T.); +#202039 = VERTEX_POINT('',#202040); +#202040 = CARTESIAN_POINT('',(206.931803,-77.975745,1.585)); +#202041 = LINE('',#202042,#202043); +#202042 = CARTESIAN_POINT('',(206.854816,-78.014239,1.585)); +#202043 = VECTOR('',#202044,1.); +#202044 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#202045 = ORIENTED_EDGE('',*,*,#202046,.T.); +#202046 = EDGE_CURVE('',#202039,#202047,#202049,.T.); +#202047 = VERTEX_POINT('',#202048); +#202048 = CARTESIAN_POINT('',(206.962211,-77.945338,1.585)); +#202049 = LINE('',#202050,#202051); +#202050 = CARTESIAN_POINT('',(206.931803,-77.975745,1.585)); +#202051 = VECTOR('',#202052,1.); +#202052 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#202053 = ORIENTED_EDGE('',*,*,#202054,.T.); +#202054 = EDGE_CURVE('',#202047,#202055,#202057,.T.); +#202055 = VERTEX_POINT('',#202056); +#202056 = CARTESIAN_POINT('',(206.962211,-77.748479,1.585)); +#202057 = CIRCLE('',#202058,0.148515070089); +#202058 = AXIS2_PLACEMENT_3D('',#202059,#202060,#202061); +#202059 = CARTESIAN_POINT('',(206.85099787319,-77.8469085,1.585)); +#202060 = DIRECTION('',(0.,-0.,1.)); +#202061 = DIRECTION('',(0.748833951572,-0.6627576578,-0.)); +#202062 = ORIENTED_EDGE('',*,*,#202063,.T.); +#202063 = EDGE_CURVE('',#202055,#202064,#202066,.T.); +#202064 = VERTEX_POINT('',#202065); +#202065 = CARTESIAN_POINT('',(206.931803,-77.718072,1.585)); +#202066 = LINE('',#202067,#202068); +#202067 = CARTESIAN_POINT('',(206.962211,-77.748479,1.585)); +#202068 = VECTOR('',#202069,1.); +#202069 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#202070 = ORIENTED_EDGE('',*,*,#202071,.T.); +#202071 = EDGE_CURVE('',#202064,#201978,#202072,.T.); +#202072 = LINE('',#202073,#202074); +#202073 = CARTESIAN_POINT('',(206.931803,-77.718072,1.585)); +#202074 = VECTOR('',#202075,1.); +#202075 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#202076 = PLANE('',#202077); +#202077 = AXIS2_PLACEMENT_3D('',#202078,#202079,#202080); +#202078 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202079 = DIRECTION('',(0.,0.,1.)); +#202080 = DIRECTION('',(1.,0.,-0.)); +#202081 = SHELL_BASED_SURFACE_MODEL('',(#202082)); +#202082 = OPEN_SHELL('',(#202083)); +#202083 = ADVANCED_FACE('',(#202084),#202325,.T.); +#202084 = FACE_BOUND('',#202085,.F.); +#202085 = EDGE_LOOP('',(#202086,#202097,#202105,#202113,#202121,#202129, + #202138,#202146,#202155,#202163,#202171,#202179,#202187,#202195, + #202203,#202212,#202220,#202228,#202236,#202244,#202253,#202261, + #202269,#202277,#202286,#202294,#202302,#202310,#202319)); +#202086 = ORIENTED_EDGE('',*,*,#202087,.T.); +#202087 = EDGE_CURVE('',#202088,#202090,#202092,.T.); +#202088 = VERTEX_POINT('',#202089); +#202089 = CARTESIAN_POINT('',(152.868882,-77.542856,1.585)); +#202090 = VERTEX_POINT('',#202091); +#202091 = CARTESIAN_POINT('',(152.933882,-77.477856,1.585)); +#202092 = CIRCLE('',#202093,6.500103935386E-02); +#202093 = AXIS2_PLACEMENT_3D('',#202094,#202095,#202096); +#202094 = CARTESIAN_POINT('',(152.93388303934,-77.54285703934,1.585)); +#202095 = DIRECTION('',(0.,0.,-1.)); +#202096 = DIRECTION('',(-0.999999999872,1.59896756177E-05,0.)); +#202097 = ORIENTED_EDGE('',*,*,#202098,.T.); +#202098 = EDGE_CURVE('',#202090,#202099,#202101,.T.); +#202099 = VERTEX_POINT('',#202100); +#202100 = CARTESIAN_POINT('',(153.233882,-77.477856,1.585)); +#202101 = LINE('',#202102,#202103); +#202102 = CARTESIAN_POINT('',(152.933882,-77.477856,1.585)); +#202103 = VECTOR('',#202104,1.); +#202104 = DIRECTION('',(1.,0.,0.)); +#202105 = ORIENTED_EDGE('',*,*,#202106,.T.); +#202106 = EDGE_CURVE('',#202099,#202107,#202109,.T.); +#202107 = VERTEX_POINT('',#202108); +#202108 = CARTESIAN_POINT('',(153.258756,-77.482804,1.585)); +#202109 = LINE('',#202110,#202111); +#202110 = CARTESIAN_POINT('',(153.233882,-77.477856,1.585)); +#202111 = VECTOR('',#202112,1.); +#202112 = DIRECTION('',(0.98078336573,-0.19509994748,0.)); +#202113 = ORIENTED_EDGE('',*,*,#202114,.T.); +#202114 = EDGE_CURVE('',#202107,#202115,#202117,.T.); +#202115 = VERTEX_POINT('',#202116); +#202116 = CARTESIAN_POINT('',(153.279843,-77.496894,1.585)); +#202117 = LINE('',#202118,#202119); +#202118 = CARTESIAN_POINT('',(153.258756,-77.482804,1.585)); +#202119 = VECTOR('',#202120,1.); +#202120 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#202121 = ORIENTED_EDGE('',*,*,#202122,.T.); +#202122 = EDGE_CURVE('',#202115,#202123,#202125,.T.); +#202123 = VERTEX_POINT('',#202124); +#202124 = CARTESIAN_POINT('',(153.331003,-77.552175,1.585)); +#202125 = LINE('',#202126,#202127); +#202126 = CARTESIAN_POINT('',(153.279843,-77.496894,1.585)); +#202127 = VECTOR('',#202128,1.); +#202128 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#202129 = ORIENTED_EDGE('',*,*,#202130,.T.); +#202130 = EDGE_CURVE('',#202123,#202131,#202133,.T.); +#202131 = VERTEX_POINT('',#202132); +#202132 = CARTESIAN_POINT('',(153.330999,-77.962113,1.585)); +#202133 = CIRCLE('',#202134,0.409312568567); +#202134 = AXIS2_PLACEMENT_3D('',#202135,#202136,#202137); +#202135 = CARTESIAN_POINT('',(152.97670664807,-77.75714054294,1.585)); +#202136 = DIRECTION('',(0.,0.,-1.)); +#202137 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#202138 = ORIENTED_EDGE('',*,*,#202139,.T.); +#202139 = EDGE_CURVE('',#202131,#202140,#202142,.T.); +#202140 = VERTEX_POINT('',#202141); +#202141 = CARTESIAN_POINT('',(153.228322,-78.066036,1.585)); +#202142 = LINE('',#202143,#202144); +#202143 = CARTESIAN_POINT('',(153.330999,-77.962113,1.585)); +#202144 = VECTOR('',#202145,1.); +#202145 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#202146 = ORIENTED_EDGE('',*,*,#202147,.T.); +#202147 = EDGE_CURVE('',#202140,#202148,#202150,.T.); +#202148 = VERTEX_POINT('',#202149); +#202149 = CARTESIAN_POINT('',(152.789546,-78.163058,1.585)); +#202150 = CIRCLE('',#202151,0.675422176574); +#202151 = AXIS2_PLACEMENT_3D('',#202152,#202153,#202154); +#202152 = CARTESIAN_POINT('',(152.87141275007,-77.49261564465,1.585)); +#202153 = DIRECTION('',(0.,0.,-1.)); +#202154 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#202155 = ORIENTED_EDGE('',*,*,#202156,.T.); +#202156 = EDGE_CURVE('',#202148,#202157,#202159,.T.); +#202157 = VERTEX_POINT('',#202158); +#202158 = CARTESIAN_POINT('',(152.604813,-78.11528,1.585)); +#202159 = LINE('',#202160,#202161); +#202160 = CARTESIAN_POINT('',(152.789546,-78.163058,1.585)); +#202161 = VECTOR('',#202162,1.); +#202162 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#202163 = ORIENTED_EDGE('',*,*,#202164,.T.); +#202164 = EDGE_CURVE('',#202157,#202165,#202167,.T.); +#202165 = VERTEX_POINT('',#202166); +#202166 = CARTESIAN_POINT('',(152.502206,-78.060247,1.585)); +#202167 = LINE('',#202168,#202169); +#202168 = CARTESIAN_POINT('',(152.604813,-78.11528,1.585)); +#202169 = VECTOR('',#202170,1.); +#202170 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#202171 = ORIENTED_EDGE('',*,*,#202172,.T.); +#202172 = EDGE_CURVE('',#202165,#202173,#202175,.T.); +#202173 = VERTEX_POINT('',#202174); +#202174 = CARTESIAN_POINT('',(152.408191,-77.962109,1.585)); +#202175 = LINE('',#202176,#202177); +#202176 = CARTESIAN_POINT('',(152.502206,-78.060247,1.585)); +#202177 = VECTOR('',#202178,1.); +#202178 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#202179 = ORIENTED_EDGE('',*,*,#202180,.T.); +#202180 = EDGE_CURVE('',#202173,#202181,#202183,.T.); +#202181 = VERTEX_POINT('',#202182); +#202182 = CARTESIAN_POINT('',(152.35663,-77.810221,1.585)); +#202183 = LINE('',#202184,#202185); +#202184 = CARTESIAN_POINT('',(152.408191,-77.962109,1.585)); +#202185 = VECTOR('',#202186,1.); +#202186 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#202187 = ORIENTED_EDGE('',*,*,#202188,.T.); +#202188 = EDGE_CURVE('',#202181,#202189,#202191,.T.); +#202189 = VERTEX_POINT('',#202190); +#202190 = CARTESIAN_POINT('',(152.357512,-77.656771,1.585)); +#202191 = LINE('',#202192,#202193); +#202192 = CARTESIAN_POINT('',(152.35663,-77.810221,1.585)); +#202193 = VECTOR('',#202194,1.); +#202194 = DIRECTION('',(5.747705643331E-03,0.999983481803,0.)); +#202195 = ORIENTED_EDGE('',*,*,#202196,.T.); +#202196 = EDGE_CURVE('',#202189,#202197,#202199,.T.); +#202197 = VERTEX_POINT('',#202198); +#202198 = CARTESIAN_POINT('',(152.404316,-77.556644,1.585)); +#202199 = LINE('',#202200,#202201); +#202200 = CARTESIAN_POINT('',(152.357512,-77.656771,1.585)); +#202201 = VECTOR('',#202202,1.); +#202202 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#202203 = ORIENTED_EDGE('',*,*,#202204,.T.); +#202204 = EDGE_CURVE('',#202197,#202205,#202207,.T.); +#202205 = VERTEX_POINT('',#202206); +#202206 = CARTESIAN_POINT('',(152.520592,-77.614782,1.585)); +#202207 = CIRCLE('',#202208,6.500026004258E-02); +#202208 = AXIS2_PLACEMENT_3D('',#202209,#202210,#202211); +#202209 = CARTESIAN_POINT('',(152.46245365279,-77.5857136944,1.585)); +#202210 = DIRECTION('',(0.,0.,-1.)); +#202211 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#202212 = ORIENTED_EDGE('',*,*,#202213,.T.); +#202213 = EDGE_CURVE('',#202205,#202214,#202216,.T.); +#202214 = VERTEX_POINT('',#202215); +#202215 = CARTESIAN_POINT('',(152.484597,-77.686772,1.585)); +#202216 = LINE('',#202217,#202218); +#202217 = CARTESIAN_POINT('',(152.520592,-77.614782,1.585)); +#202218 = VECTOR('',#202219,1.); +#202219 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#202220 = ORIENTED_EDGE('',*,*,#202221,.T.); +#202221 = EDGE_CURVE('',#202214,#202222,#202224,.T.); +#202222 = VERTEX_POINT('',#202223); +#202223 = CARTESIAN_POINT('',(152.484597,-77.789452,1.585)); +#202224 = LINE('',#202225,#202226); +#202225 = CARTESIAN_POINT('',(152.484597,-77.686772,1.585)); +#202226 = VECTOR('',#202227,1.); +#202227 = DIRECTION('',(0.,-1.,0.)); +#202228 = ORIENTED_EDGE('',*,*,#202229,.T.); +#202229 = EDGE_CURVE('',#202222,#202230,#202232,.T.); +#202230 = VERTEX_POINT('',#202231); +#202231 = CARTESIAN_POINT('',(152.519265,-77.893457,1.585)); +#202232 = LINE('',#202233,#202234); +#202233 = CARTESIAN_POINT('',(152.484597,-77.789452,1.585)); +#202234 = VECTOR('',#202235,1.); +#202235 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#202236 = ORIENTED_EDGE('',*,*,#202237,.T.); +#202237 = EDGE_CURVE('',#202230,#202238,#202240,.T.); +#202238 = VERTEX_POINT('',#202239); +#202239 = CARTESIAN_POINT('',(152.586669,-77.960863,1.585)); +#202240 = LINE('',#202241,#202242); +#202241 = CARTESIAN_POINT('',(152.519265,-77.893457,1.585)); +#202242 = VECTOR('',#202243,1.); +#202243 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#202244 = ORIENTED_EDGE('',*,*,#202245,.T.); +#202245 = EDGE_CURVE('',#202238,#202246,#202248,.T.); +#202246 = VERTEX_POINT('',#202247); +#202247 = CARTESIAN_POINT('',(152.925881,-78.034999,1.585)); +#202248 = CIRCLE('',#202249,0.553317785495); +#202249 = AXIS2_PLACEMENT_3D('',#202250,#202251,#202252); +#202250 = CARTESIAN_POINT('',(152.8684500839,-77.48466976979,1.585)); +#202251 = DIRECTION('',(0.,0.,1.)); +#202252 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#202253 = ORIENTED_EDGE('',*,*,#202254,.T.); +#202254 = EDGE_CURVE('',#202246,#202255,#202257,.T.); +#202255 = VERTEX_POINT('',#202256); +#202256 = CARTESIAN_POINT('',(153.082622,-77.995813,1.585)); +#202257 = LINE('',#202258,#202259); +#202258 = CARTESIAN_POINT('',(152.925881,-78.034999,1.585)); +#202259 = VECTOR('',#202260,1.); +#202260 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#202261 = ORIENTED_EDGE('',*,*,#202262,.T.); +#202262 = EDGE_CURVE('',#202255,#202263,#202265,.T.); +#202263 = VERTEX_POINT('',#202264); +#202264 = CARTESIAN_POINT('',(153.152522,-77.960864,1.585)); +#202265 = LINE('',#202266,#202267); +#202266 = CARTESIAN_POINT('',(153.082622,-77.995813,1.585)); +#202267 = VECTOR('',#202268,1.); +#202268 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#202269 = ORIENTED_EDGE('',*,*,#202270,.T.); +#202270 = EDGE_CURVE('',#202263,#202271,#202273,.T.); +#202271 = VERTEX_POINT('',#202272); +#202272 = CARTESIAN_POINT('',(153.219928,-77.893457,1.585)); +#202273 = LINE('',#202274,#202275); +#202274 = CARTESIAN_POINT('',(153.152522,-77.960864,1.585)); +#202275 = VECTOR('',#202276,1.); +#202276 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#202277 = ORIENTED_EDGE('',*,*,#202278,.T.); +#202278 = EDGE_CURVE('',#202271,#202279,#202281,.T.); +#202279 = VERTEX_POINT('',#202280); +#202280 = CARTESIAN_POINT('',(153.219928,-77.620825,1.585)); +#202281 = CIRCLE('',#202282,0.272194686174); +#202282 = AXIS2_PLACEMENT_3D('',#202283,#202284,#202285); +#202283 = CARTESIAN_POINT('',(152.98432686391,-77.757141,1.585)); +#202284 = DIRECTION('',(0.,-0.,1.)); +#202285 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#202286 = ORIENTED_EDGE('',*,*,#202287,.T.); +#202287 = EDGE_CURVE('',#202279,#202288,#202290,.T.); +#202288 = VERTEX_POINT('',#202289); +#202289 = CARTESIAN_POINT('',(153.206959,-77.607856,1.585)); +#202290 = LINE('',#202291,#202292); +#202291 = CARTESIAN_POINT('',(153.219928,-77.620825,1.585)); +#202292 = VECTOR('',#202293,1.); +#202293 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202294 = ORIENTED_EDGE('',*,*,#202295,.T.); +#202295 = EDGE_CURVE('',#202288,#202296,#202298,.T.); +#202296 = VERTEX_POINT('',#202297); +#202297 = CARTESIAN_POINT('',(152.998882,-77.607856,1.585)); +#202298 = LINE('',#202299,#202300); +#202299 = CARTESIAN_POINT('',(153.206959,-77.607856,1.585)); +#202300 = VECTOR('',#202301,1.); +#202301 = DIRECTION('',(-1.,0.,0.)); +#202302 = ORIENTED_EDGE('',*,*,#202303,.T.); +#202303 = EDGE_CURVE('',#202296,#202304,#202306,.T.); +#202304 = VERTEX_POINT('',#202305); +#202305 = CARTESIAN_POINT('',(152.998882,-77.714285,1.585)); +#202306 = LINE('',#202307,#202308); +#202307 = CARTESIAN_POINT('',(152.998882,-77.607856,1.585)); +#202308 = VECTOR('',#202309,1.); +#202309 = DIRECTION('',(0.,-1.,0.)); +#202310 = ORIENTED_EDGE('',*,*,#202311,.T.); +#202311 = EDGE_CURVE('',#202304,#202312,#202314,.T.); +#202312 = VERTEX_POINT('',#202313); +#202313 = CARTESIAN_POINT('',(152.868882,-77.714285,1.585)); +#202314 = CIRCLE('',#202315,6.500000000092E-02); +#202315 = AXIS2_PLACEMENT_3D('',#202316,#202317,#202318); +#202316 = CARTESIAN_POINT('',(152.933882,-77.71428465513,1.585)); +#202317 = DIRECTION('',(-0.,0.,-1.)); +#202318 = DIRECTION('',(0.999999999986,-5.305658244295E-06,-0.)); +#202319 = ORIENTED_EDGE('',*,*,#202320,.T.); +#202320 = EDGE_CURVE('',#202312,#202088,#202321,.T.); +#202321 = LINE('',#202322,#202323); +#202322 = CARTESIAN_POINT('',(152.868882,-77.714285,1.585)); +#202323 = VECTOR('',#202324,1.); +#202324 = DIRECTION('',(0.,1.,0.)); +#202325 = PLANE('',#202326); +#202326 = AXIS2_PLACEMENT_3D('',#202327,#202328,#202329); +#202327 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202328 = DIRECTION('',(0.,0.,1.)); +#202329 = DIRECTION('',(1.,0.,-0.)); +#202330 = SHELL_BASED_SURFACE_MODEL('',(#202331)); +#202331 = OPEN_SHELL('',(#202332)); +#202332 = ADVANCED_FACE('',(#202333),#202435,.T.); +#202333 = FACE_BOUND('',#202334,.F.); +#202334 = EDGE_LOOP('',(#202335,#202346,#202354,#202363,#202371,#202379, + #202387,#202396,#202404,#202413,#202421,#202429)); +#202335 = ORIENTED_EDGE('',*,*,#202336,.T.); +#202336 = EDGE_CURVE('',#202337,#202339,#202341,.T.); +#202337 = VERTEX_POINT('',#202338); +#202338 = CARTESIAN_POINT('',(116.959597,-77.636428,1.585)); +#202339 = VERTEX_POINT('',#202340); +#202340 = CARTESIAN_POINT('',(116.959597,-77.506428,1.585)); +#202341 = CIRCLE('',#202342,6.500000000091E-02); +#202342 = AXIS2_PLACEMENT_3D('',#202343,#202344,#202345); +#202343 = CARTESIAN_POINT('',(116.95959734486,-77.571428,1.585)); +#202344 = DIRECTION('',(0.,0.,-1.)); +#202345 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#202346 = ORIENTED_EDGE('',*,*,#202347,.T.); +#202347 = EDGE_CURVE('',#202339,#202348,#202350,.T.); +#202348 = VERTEX_POINT('',#202349); +#202349 = CARTESIAN_POINT('',(117.859597,-77.506428,1.585)); +#202350 = LINE('',#202351,#202352); +#202351 = CARTESIAN_POINT('',(116.959597,-77.506428,1.585)); +#202352 = VECTOR('',#202353,1.); +#202353 = DIRECTION('',(1.,0.,0.)); +#202354 = ORIENTED_EDGE('',*,*,#202355,.T.); +#202355 = EDGE_CURVE('',#202348,#202356,#202358,.T.); +#202356 = VERTEX_POINT('',#202357); +#202357 = CARTESIAN_POINT('',(117.859597,-77.636428,1.585)); +#202358 = CIRCLE('',#202359,6.500000000091E-02); +#202359 = AXIS2_PLACEMENT_3D('',#202360,#202361,#202362); +#202360 = CARTESIAN_POINT('',(117.85959665513,-77.571428,1.585)); +#202361 = DIRECTION('',(0.,0.,-1.)); +#202362 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#202363 = ORIENTED_EDGE('',*,*,#202364,.T.); +#202364 = EDGE_CURVE('',#202356,#202365,#202367,.T.); +#202365 = VERTEX_POINT('',#202366); +#202366 = CARTESIAN_POINT('',(117.453168,-77.636428,1.585)); +#202367 = LINE('',#202368,#202369); +#202368 = CARTESIAN_POINT('',(117.859597,-77.636428,1.585)); +#202369 = VECTOR('',#202370,1.); +#202370 = DIRECTION('',(-1.,0.,0.)); +#202371 = ORIENTED_EDGE('',*,*,#202372,.T.); +#202372 = EDGE_CURVE('',#202365,#202373,#202375,.T.); +#202373 = VERTEX_POINT('',#202374); +#202374 = CARTESIAN_POINT('',(117.453168,-78.020714,1.585)); +#202375 = LINE('',#202376,#202377); +#202376 = CARTESIAN_POINT('',(117.453168,-77.636428,1.585)); +#202377 = VECTOR('',#202378,1.); +#202378 = DIRECTION('',(0.,-1.,0.)); +#202379 = ORIENTED_EDGE('',*,*,#202380,.T.); +#202380 = EDGE_CURVE('',#202373,#202381,#202383,.T.); +#202381 = VERTEX_POINT('',#202382); +#202382 = CARTESIAN_POINT('',(117.859597,-78.020714,1.585)); +#202383 = LINE('',#202384,#202385); +#202384 = CARTESIAN_POINT('',(117.453168,-78.020714,1.585)); +#202385 = VECTOR('',#202386,1.); +#202386 = DIRECTION('',(1.,0.,0.)); +#202387 = ORIENTED_EDGE('',*,*,#202388,.T.); +#202388 = EDGE_CURVE('',#202381,#202389,#202391,.T.); +#202389 = VERTEX_POINT('',#202390); +#202390 = CARTESIAN_POINT('',(117.859597,-78.150714,1.585)); +#202391 = CIRCLE('',#202392,6.500000000091E-02); +#202392 = AXIS2_PLACEMENT_3D('',#202393,#202394,#202395); +#202393 = CARTESIAN_POINT('',(117.85959665513,-78.085714,1.585)); +#202394 = DIRECTION('',(0.,0.,-1.)); +#202395 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#202396 = ORIENTED_EDGE('',*,*,#202397,.T.); +#202397 = EDGE_CURVE('',#202389,#202398,#202400,.T.); +#202398 = VERTEX_POINT('',#202399); +#202399 = CARTESIAN_POINT('',(116.959597,-78.150714,1.585)); +#202400 = LINE('',#202401,#202402); +#202401 = CARTESIAN_POINT('',(117.859597,-78.150714,1.585)); +#202402 = VECTOR('',#202403,1.); +#202403 = DIRECTION('',(-1.,0.,0.)); +#202404 = ORIENTED_EDGE('',*,*,#202405,.T.); +#202405 = EDGE_CURVE('',#202398,#202406,#202408,.T.); +#202406 = VERTEX_POINT('',#202407); +#202407 = CARTESIAN_POINT('',(116.959597,-78.020714,1.585)); +#202408 = CIRCLE('',#202409,6.500000000092E-02); +#202409 = AXIS2_PLACEMENT_3D('',#202410,#202411,#202412); +#202410 = CARTESIAN_POINT('',(116.95959734486,-78.085714,1.585)); +#202411 = DIRECTION('',(0.,0.,-1.)); +#202412 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#202413 = ORIENTED_EDGE('',*,*,#202414,.T.); +#202414 = EDGE_CURVE('',#202406,#202415,#202417,.T.); +#202415 = VERTEX_POINT('',#202416); +#202416 = CARTESIAN_POINT('',(117.323168,-78.020714,1.585)); +#202417 = LINE('',#202418,#202419); +#202418 = CARTESIAN_POINT('',(116.959597,-78.020714,1.585)); +#202419 = VECTOR('',#202420,1.); +#202420 = DIRECTION('',(1.,0.,0.)); +#202421 = ORIENTED_EDGE('',*,*,#202422,.T.); +#202422 = EDGE_CURVE('',#202415,#202423,#202425,.T.); +#202423 = VERTEX_POINT('',#202424); +#202424 = CARTESIAN_POINT('',(117.323168,-77.636428,1.585)); +#202425 = LINE('',#202426,#202427); +#202426 = CARTESIAN_POINT('',(117.323168,-78.020714,1.585)); +#202427 = VECTOR('',#202428,1.); +#202428 = DIRECTION('',(0.,1.,0.)); +#202429 = ORIENTED_EDGE('',*,*,#202430,.T.); +#202430 = EDGE_CURVE('',#202423,#202337,#202431,.T.); +#202431 = LINE('',#202432,#202433); +#202432 = CARTESIAN_POINT('',(117.323168,-77.636428,1.585)); +#202433 = VECTOR('',#202434,1.); +#202434 = DIRECTION('',(-1.,0.,0.)); +#202435 = PLANE('',#202436); +#202436 = AXIS2_PLACEMENT_3D('',#202437,#202438,#202439); +#202437 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202438 = DIRECTION('',(0.,0.,1.)); +#202439 = DIRECTION('',(1.,0.,-0.)); +#202440 = SHELL_BASED_SURFACE_MODEL('',(#202441)); +#202441 = OPEN_SHELL('',(#202442)); +#202442 = ADVANCED_FACE('',(#202443),#202629,.T.); +#202443 = FACE_BOUND('',#202444,.F.); +#202444 = EDGE_LOOP('',(#202445,#202456,#202464,#202472,#202480,#202488, + #202497,#202505,#202514,#202522,#202531,#202539,#202548,#202556, + #202564,#202572,#202581,#202589,#202597,#202606,#202614,#202623)); +#202445 = ORIENTED_EDGE('',*,*,#202446,.T.); +#202446 = EDGE_CURVE('',#202447,#202449,#202451,.T.); +#202447 = VERTEX_POINT('',#202448); +#202448 = CARTESIAN_POINT('',(155.240369,-77.613914,1.585)); +#202449 = VERTEX_POINT('',#202450); +#202450 = CARTESIAN_POINT('',(155.459225,-77.395057,1.585)); +#202451 = CIRCLE('',#202452,0.308109459502); +#202452 = AXIS2_PLACEMENT_3D('',#202453,#202454,#202455); +#202453 = CARTESIAN_POINT('',(155.53818845359,-77.69287609279,1.585)); +#202454 = DIRECTION('',(0.,0.,-1.)); +#202455 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#202456 = ORIENTED_EDGE('',*,*,#202457,.T.); +#202457 = EDGE_CURVE('',#202449,#202458,#202460,.T.); +#202458 = VERTEX_POINT('',#202459); +#202459 = CARTESIAN_POINT('',(155.691361,-77.392777,1.585)); +#202460 = LINE('',#202461,#202462); +#202461 = CARTESIAN_POINT('',(155.459225,-77.395057,1.585)); +#202462 = VECTOR('',#202463,1.); +#202463 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#202464 = ORIENTED_EDGE('',*,*,#202465,.T.); +#202465 = EDGE_CURVE('',#202458,#202466,#202468,.T.); +#202466 = VERTEX_POINT('',#202467); +#202467 = CARTESIAN_POINT('',(155.717237,-77.399004,1.585)); +#202468 = LINE('',#202469,#202470); +#202469 = CARTESIAN_POINT('',(155.691361,-77.392777,1.585)); +#202470 = VECTOR('',#202471,1.); +#202471 = DIRECTION('',(0.97224421645,-0.233968338841,0.)); +#202472 = ORIENTED_EDGE('',*,*,#202473,.T.); +#202473 = EDGE_CURVE('',#202466,#202474,#202476,.T.); +#202474 = VERTEX_POINT('',#202475); +#202475 = CARTESIAN_POINT('',(155.819844,-77.454037,1.585)); +#202476 = LINE('',#202477,#202478); +#202477 = CARTESIAN_POINT('',(155.717237,-77.399004,1.585)); +#202478 = VECTOR('',#202479,1.); +#202479 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#202480 = ORIENTED_EDGE('',*,*,#202481,.T.); +#202481 = EDGE_CURVE('',#202474,#202482,#202484,.T.); +#202482 = VERTEX_POINT('',#202483); +#202483 = CARTESIAN_POINT('',(155.874878,-77.513788,1.585)); +#202484 = LINE('',#202485,#202486); +#202485 = CARTESIAN_POINT('',(155.819844,-77.454037,1.585)); +#202486 = VECTOR('',#202487,1.); +#202487 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#202488 = ORIENTED_EDGE('',*,*,#202489,.T.); +#202489 = EDGE_CURVE('',#202482,#202490,#202492,.T.); +#202490 = VERTEX_POINT('',#202491); +#202491 = CARTESIAN_POINT('',(155.868491,-78.008725,1.585)); +#202492 = CIRCLE('',#202493,0.457783772261); +#202493 = AXIS2_PLACEMENT_3D('',#202494,#202495,#202496); +#202494 = CARTESIAN_POINT('',(155.48659953493,-77.75628710455,1.585)); +#202495 = DIRECTION('',(0.,0.,-1.)); +#202496 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#202497 = ORIENTED_EDGE('',*,*,#202498,.T.); +#202498 = EDGE_CURVE('',#202490,#202499,#202501,.T.); +#202499 = VERTEX_POINT('',#202500); +#202500 = CARTESIAN_POINT('',(155.819843,-78.060247,1.585)); +#202501 = LINE('',#202502,#202503); +#202502 = CARTESIAN_POINT('',(155.868491,-78.008725,1.585)); +#202503 = VECTOR('',#202504,1.); +#202504 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#202505 = ORIENTED_EDGE('',*,*,#202506,.T.); +#202506 = EDGE_CURVE('',#202499,#202507,#202509,.T.); +#202507 = VERTEX_POINT('',#202508); +#202508 = CARTESIAN_POINT('',(155.727921,-77.968323,1.585)); +#202509 = CIRCLE('',#202510,6.499937665135E-02); +#202510 = AXIS2_PLACEMENT_3D('',#202511,#202512,#202513); +#202511 = CARTESIAN_POINT('',(155.77388218097,-78.01428481902,1.585)); +#202512 = DIRECTION('',(-0.,0.,-1.)); +#202513 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#202514 = ORIENTED_EDGE('',*,*,#202515,.T.); +#202515 = EDGE_CURVE('',#202507,#202516,#202518,.T.); +#202516 = VERTEX_POINT('',#202517); +#202517 = CARTESIAN_POINT('',(155.763319,-77.932925,1.585)); +#202518 = LINE('',#202519,#202520); +#202519 = CARTESIAN_POINT('',(155.727921,-77.968323,1.585)); +#202520 = VECTOR('',#202521,1.); +#202521 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#202522 = ORIENTED_EDGE('',*,*,#202523,.T.); +#202523 = EDGE_CURVE('',#202516,#202524,#202526,.T.); +#202524 = VERTEX_POINT('',#202525); +#202525 = CARTESIAN_POINT('',(155.763319,-77.58136,1.585)); +#202526 = CIRCLE('',#202527,0.325008683278); +#202527 = AXIS2_PLACEMENT_3D('',#202528,#202529,#202530); +#202528 = CARTESIAN_POINT('',(155.489949,-77.7571425,1.585)); +#202529 = DIRECTION('',(0.,-0.,1.)); +#202530 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#202531 = ORIENTED_EDGE('',*,*,#202532,.T.); +#202532 = EDGE_CURVE('',#202524,#202533,#202535,.T.); +#202533 = VERTEX_POINT('',#202534); +#202534 = CARTESIAN_POINT('',(155.735379,-77.55342,1.585)); +#202535 = LINE('',#202536,#202537); +#202536 = CARTESIAN_POINT('',(155.763319,-77.58136,1.585)); +#202537 = VECTOR('',#202538,1.); +#202538 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202539 = ORIENTED_EDGE('',*,*,#202540,.T.); +#202540 = EDGE_CURVE('',#202533,#202541,#202543,.T.); +#202541 = VERTEX_POINT('',#202542); +#202542 = CARTESIAN_POINT('',(155.426671,-77.55342,1.585)); +#202543 = CIRCLE('',#202544,0.277419178293); +#202544 = AXIS2_PLACEMENT_3D('',#202545,#202546,#202547); +#202545 = CARTESIAN_POINT('',(155.581025,-77.783933,1.585)); +#202546 = DIRECTION('',(0.,0.,1.)); +#202547 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#202548 = ORIENTED_EDGE('',*,*,#202549,.T.); +#202549 = EDGE_CURVE('',#202541,#202550,#202552,.T.); +#202550 = VERTEX_POINT('',#202551); +#202551 = CARTESIAN_POINT('',(155.398733,-77.581358,1.585)); +#202552 = LINE('',#202553,#202554); +#202553 = CARTESIAN_POINT('',(155.426671,-77.55342,1.585)); +#202554 = VECTOR('',#202555,1.); +#202555 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#202556 = ORIENTED_EDGE('',*,*,#202557,.T.); +#202557 = EDGE_CURVE('',#202550,#202558,#202560,.T.); +#202558 = VERTEX_POINT('',#202559); +#202559 = CARTESIAN_POINT('',(155.367454,-77.643916,1.585)); +#202560 = LINE('',#202561,#202562); +#202561 = CARTESIAN_POINT('',(155.398733,-77.581358,1.585)); +#202562 = VECTOR('',#202563,1.); +#202563 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#202564 = ORIENTED_EDGE('',*,*,#202565,.T.); +#202565 = EDGE_CURVE('',#202558,#202566,#202568,.T.); +#202566 = VERTEX_POINT('',#202567); +#202567 = CARTESIAN_POINT('',(155.367454,-77.757142,1.585)); +#202568 = LINE('',#202569,#202570); +#202569 = CARTESIAN_POINT('',(155.367454,-77.643916,1.585)); +#202570 = VECTOR('',#202571,1.); +#202571 = DIRECTION('',(0.,-1.,0.)); +#202572 = ORIENTED_EDGE('',*,*,#202573,.T.); +#202573 = EDGE_CURVE('',#202566,#202574,#202576,.T.); +#202574 = VERTEX_POINT('',#202575); +#202575 = CARTESIAN_POINT('',(155.259652,-77.80606,1.585)); +#202576 = CIRCLE('',#202577,6.500010429715E-02); +#202577 = AXIS2_PLACEMENT_3D('',#202578,#202579,#202580); +#202578 = CARTESIAN_POINT('',(155.3024538957,-77.75714158544,1.585)); +#202579 = DIRECTION('',(-0.,0.,-1.)); +#202580 = DIRECTION('',(0.99999999998,-6.37778922417E-06,-0.)); +#202581 = ORIENTED_EDGE('',*,*,#202582,.T.); +#202582 = EDGE_CURVE('',#202574,#202583,#202585,.T.); +#202583 = VERTEX_POINT('',#202584); +#202584 = CARTESIAN_POINT('',(155.024597,-77.600386,1.585)); +#202585 = LINE('',#202586,#202587); +#202586 = CARTESIAN_POINT('',(155.259652,-77.80606,1.585)); +#202587 = VECTOR('',#202588,1.); +#202588 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#202589 = ORIENTED_EDGE('',*,*,#202590,.T.); +#202590 = EDGE_CURVE('',#202583,#202591,#202593,.T.); +#202591 = VERTEX_POINT('',#202592); +#202592 = CARTESIAN_POINT('',(155.024597,-78.014285,1.585)); +#202593 = LINE('',#202594,#202595); +#202594 = CARTESIAN_POINT('',(155.024597,-77.600386,1.585)); +#202595 = VECTOR('',#202596,1.); +#202596 = DIRECTION('',(0.,-1.,0.)); +#202597 = ORIENTED_EDGE('',*,*,#202598,.T.); +#202598 = EDGE_CURVE('',#202591,#202599,#202601,.T.); +#202599 = VERTEX_POINT('',#202600); +#202600 = CARTESIAN_POINT('',(154.894597,-78.014285,1.585)); +#202601 = CIRCLE('',#202602,6.500000000092E-02); +#202602 = AXIS2_PLACEMENT_3D('',#202603,#202604,#202605); +#202603 = CARTESIAN_POINT('',(154.959597,-78.01428465513,1.585)); +#202604 = DIRECTION('',(-0.,0.,-1.)); +#202605 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#202606 = ORIENTED_EDGE('',*,*,#202607,.T.); +#202607 = EDGE_CURVE('',#202599,#202608,#202610,.T.); +#202608 = VERTEX_POINT('',#202609); +#202609 = CARTESIAN_POINT('',(154.894597,-77.457142,1.585)); +#202610 = LINE('',#202611,#202612); +#202611 = CARTESIAN_POINT('',(154.894597,-78.014285,1.585)); +#202612 = VECTOR('',#202613,1.); +#202613 = DIRECTION('',(0.,1.,0.)); +#202614 = ORIENTED_EDGE('',*,*,#202615,.T.); +#202615 = EDGE_CURVE('',#202608,#202616,#202618,.T.); +#202616 = VERTEX_POINT('',#202617); +#202617 = CARTESIAN_POINT('',(155.0024,-77.408225,1.585)); +#202618 = CIRCLE('',#202619,6.500002288385E-02); +#202619 = AXIS2_PLACEMENT_3D('',#202620,#202621,#202622); +#202620 = CARTESIAN_POINT('',(154.95959702288,-77.45714236015,1.585)); +#202621 = DIRECTION('',(0.,0.,-1.)); +#202622 = DIRECTION('',(-0.999999999985,5.540887478609E-06,0.)); +#202623 = ORIENTED_EDGE('',*,*,#202624,.T.); +#202624 = EDGE_CURVE('',#202616,#202447,#202625,.T.); +#202625 = LINE('',#202626,#202627); +#202626 = CARTESIAN_POINT('',(155.0024,-77.408225,1.585)); +#202627 = VECTOR('',#202628,1.); +#202628 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#202629 = PLANE('',#202630); +#202630 = AXIS2_PLACEMENT_3D('',#202631,#202632,#202633); +#202631 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202632 = DIRECTION('',(0.,0.,1.)); +#202633 = DIRECTION('',(1.,0.,-0.)); +#202634 = SHELL_BASED_SURFACE_MODEL('',(#202635)); +#202635 = OPEN_SHELL('',(#202636)); +#202636 = ADVANCED_FACE('',(#202637),#202909,.T.); +#202637 = FACE_BOUND('',#202638,.F.); +#202638 = EDGE_LOOP('',(#202639,#202650,#202658,#202666,#202675,#202683, + #202691,#202699,#202707,#202715,#202723,#202731,#202740,#202748, + #202756,#202764,#202772,#202780,#202789,#202797,#202805,#202814, + #202822,#202830,#202838,#202846,#202854,#202862,#202870,#202879, + #202887,#202895,#202903)); +#202639 = ORIENTED_EDGE('',*,*,#202640,.T.); +#202640 = EDGE_CURVE('',#202641,#202643,#202645,.T.); +#202641 = VERTEX_POINT('',#202642); +#202642 = CARTESIAN_POINT('',(142.24079,-77.458016,1.585)); +#202643 = VERTEX_POINT('',#202644); +#202644 = CARTESIAN_POINT('',(142.364119,-77.499125,1.585)); +#202645 = CIRCLE('',#202646,6.499998485138E-02); +#202646 = AXIS2_PLACEMENT_3D('',#202647,#202648,#202649); +#202647 = CARTESIAN_POINT('',(142.30245436584,-77.47857090248,1.585)); +#202648 = DIRECTION('',(0.,0.,-1.)); +#202649 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#202650 = ORIENTED_EDGE('',*,*,#202651,.T.); +#202651 = EDGE_CURVE('',#202643,#202652,#202654,.T.); +#202652 = VERTEX_POINT('',#202653); +#202653 = CARTESIAN_POINT('',(142.324597,-77.61769,1.585)); +#202654 = LINE('',#202655,#202656); +#202655 = CARTESIAN_POINT('',(142.364119,-77.499125,1.585)); +#202656 = VECTOR('',#202657,1.); +#202657 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#202658 = ORIENTED_EDGE('',*,*,#202659,.T.); +#202659 = EDGE_CURVE('',#202652,#202660,#202662,.T.); +#202660 = VERTEX_POINT('',#202661); +#202661 = CARTESIAN_POINT('',(142.324597,-77.806083,1.585)); +#202662 = LINE('',#202663,#202664); +#202663 = CARTESIAN_POINT('',(142.324597,-77.61769,1.585)); +#202664 = VECTOR('',#202665,1.); +#202665 = DIRECTION('',(0.,-1.,0.)); +#202666 = ORIENTED_EDGE('',*,*,#202667,.T.); +#202667 = EDGE_CURVE('',#202660,#202668,#202670,.T.); +#202668 = VERTEX_POINT('',#202669); +#202669 = CARTESIAN_POINT('',(142.44637,-77.927857,1.585)); +#202670 = CIRCLE('',#202671,0.170995888391); +#202671 = AXIS2_PLACEMENT_3D('',#202672,#202673,#202674); +#202672 = CARTESIAN_POINT('',(142.4899473225,-77.76250703534,1.585)); +#202673 = DIRECTION('',(0.,0.,1.)); +#202674 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#202675 = ORIENTED_EDGE('',*,*,#202676,.T.); +#202676 = EDGE_CURVE('',#202668,#202677,#202679,.T.); +#202677 = VERTEX_POINT('',#202678); +#202678 = CARTESIAN_POINT('',(142.501395,-77.927857,1.585)); +#202679 = LINE('',#202680,#202681); +#202680 = CARTESIAN_POINT('',(142.44637,-77.927857,1.585)); +#202681 = VECTOR('',#202682,1.); +#202682 = DIRECTION('',(1.,0.,0.)); +#202683 = ORIENTED_EDGE('',*,*,#202684,.T.); +#202684 = EDGE_CURVE('',#202677,#202685,#202687,.T.); +#202685 = VERTEX_POINT('',#202686); +#202686 = CARTESIAN_POINT('',(142.563951,-77.896579,1.585)); +#202687 = LINE('',#202688,#202689); +#202688 = CARTESIAN_POINT('',(142.501395,-77.927857,1.585)); +#202689 = VECTOR('',#202690,1.); +#202690 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#202691 = ORIENTED_EDGE('',*,*,#202692,.T.); +#202692 = EDGE_CURVE('',#202685,#202693,#202695,.T.); +#202693 = VERTEX_POINT('',#202694); +#202694 = CARTESIAN_POINT('',(142.591889,-77.86864,1.585)); +#202695 = LINE('',#202696,#202697); +#202696 = CARTESIAN_POINT('',(142.563951,-77.896579,1.585)); +#202697 = VECTOR('',#202698,1.); +#202698 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#202699 = ORIENTED_EDGE('',*,*,#202700,.T.); +#202700 = EDGE_CURVE('',#202693,#202701,#202703,.T.); +#202701 = VERTEX_POINT('',#202702); +#202702 = CARTESIAN_POINT('',(142.626839,-77.798739,1.585)); +#202703 = LINE('',#202704,#202705); +#202704 = CARTESIAN_POINT('',(142.591889,-77.86864,1.585)); +#202705 = VECTOR('',#202706,1.); +#202706 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#202707 = ORIENTED_EDGE('',*,*,#202708,.T.); +#202708 = EDGE_CURVE('',#202701,#202709,#202711,.T.); +#202709 = VERTEX_POINT('',#202710); +#202710 = CARTESIAN_POINT('',(142.672887,-77.620931,1.585)); +#202711 = LINE('',#202712,#202713); +#202712 = CARTESIAN_POINT('',(142.626839,-77.798739,1.585)); +#202713 = VECTOR('',#202714,1.); +#202714 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#202715 = ORIENTED_EDGE('',*,*,#202716,.T.); +#202716 = EDGE_CURVE('',#202709,#202717,#202719,.T.); +#202717 = VERTEX_POINT('',#202718); +#202718 = CARTESIAN_POINT('',(142.72792,-77.518324,1.585)); +#202719 = LINE('',#202720,#202721); +#202720 = CARTESIAN_POINT('',(142.672887,-77.620931,1.585)); +#202721 = VECTOR('',#202722,1.); +#202722 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#202723 = ORIENTED_EDGE('',*,*,#202724,.T.); +#202724 = EDGE_CURVE('',#202717,#202725,#202727,.T.); +#202725 = VERTEX_POINT('',#202726); +#202726 = CARTESIAN_POINT('',(142.787671,-77.46329,1.585)); +#202727 = LINE('',#202728,#202729); +#202728 = CARTESIAN_POINT('',(142.72792,-77.518324,1.585)); +#202729 = VECTOR('',#202730,1.); +#202730 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#202731 = ORIENTED_EDGE('',*,*,#202732,.T.); +#202732 = EDGE_CURVE('',#202725,#202733,#202735,.T.); +#202733 = VERTEX_POINT('',#202734); +#202734 = CARTESIAN_POINT('',(143.017237,-77.420433,1.585)); +#202735 = CIRCLE('',#202736,0.258971949836); +#202736 = AXIS2_PLACEMENT_3D('',#202737,#202738,#202739); +#202737 = CARTESIAN_POINT('',(142.94487456064,-77.66908968736,1.585)); +#202738 = DIRECTION('',(0.,0.,-1.)); +#202739 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#202740 = ORIENTED_EDGE('',*,*,#202741,.T.); +#202741 = EDGE_CURVE('',#202733,#202742,#202744,.T.); +#202742 = VERTEX_POINT('',#202743); +#202743 = CARTESIAN_POINT('',(143.119844,-77.475466,1.585)); +#202744 = LINE('',#202745,#202746); +#202745 = CARTESIAN_POINT('',(143.017237,-77.420433,1.585)); +#202746 = VECTOR('',#202747,1.); +#202747 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#202748 = ORIENTED_EDGE('',*,*,#202749,.T.); +#202749 = EDGE_CURVE('',#202742,#202750,#202752,.T.); +#202750 = VERTEX_POINT('',#202751); +#202751 = CARTESIAN_POINT('',(143.174878,-77.535217,1.585)); +#202752 = LINE('',#202753,#202754); +#202753 = CARTESIAN_POINT('',(143.119844,-77.475466,1.585)); +#202754 = VECTOR('',#202755,1.); +#202755 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#202756 = ORIENTED_EDGE('',*,*,#202757,.T.); +#202757 = EDGE_CURVE('',#202750,#202758,#202760,.T.); +#202758 = VERTEX_POINT('',#202759); +#202759 = CARTESIAN_POINT('',(143.221681,-77.635343,1.585)); +#202760 = LINE('',#202761,#202762); +#202761 = CARTESIAN_POINT('',(143.174878,-77.535217,1.585)); +#202762 = VECTOR('',#202763,1.); +#202763 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#202764 = ORIENTED_EDGE('',*,*,#202765,.T.); +#202765 = EDGE_CURVE('',#202758,#202766,#202768,.T.); +#202766 = VERTEX_POINT('',#202767); +#202767 = CARTESIAN_POINT('',(143.222563,-77.874508,1.585)); +#202768 = LINE('',#202769,#202770); +#202769 = CARTESIAN_POINT('',(143.221681,-77.635343,1.585)); +#202770 = VECTOR('',#202771,1.); +#202771 = DIRECTION('',(3.687805500128E-03,-0.999993200022,0.)); +#202772 = ORIENTED_EDGE('',*,*,#202773,.T.); +#202773 = EDGE_CURVE('',#202766,#202774,#202776,.T.); +#202774 = VERTEX_POINT('',#202775); +#202775 = CARTESIAN_POINT('',(143.178404,-78.013412,1.585)); +#202776 = LINE('',#202777,#202778); +#202777 = CARTESIAN_POINT('',(143.222563,-77.874508,1.585)); +#202778 = VECTOR('',#202779,1.); +#202779 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#202780 = ORIENTED_EDGE('',*,*,#202781,.T.); +#202781 = EDGE_CURVE('',#202774,#202782,#202784,.T.); +#202782 = VERTEX_POINT('',#202783); +#202783 = CARTESIAN_POINT('',(143.055076,-77.972302,1.585)); +#202784 = CIRCLE('',#202785,6.499966862258E-02); +#202785 = AXIS2_PLACEMENT_3D('',#202786,#202787,#202788); +#202786 = CARTESIAN_POINT('',(143.11674006734,-77.99285679797,1.585)); +#202787 = DIRECTION('',(-0.,0.,-1.)); +#202788 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#202789 = ORIENTED_EDGE('',*,*,#202790,.T.); +#202790 = EDGE_CURVE('',#202782,#202791,#202793,.T.); +#202791 = VERTEX_POINT('',#202792); +#202792 = CARTESIAN_POINT('',(143.094597,-77.853739,1.585)); +#202793 = LINE('',#202794,#202795); +#202794 = CARTESIAN_POINT('',(143.055076,-77.972302,1.585)); +#202795 = VECTOR('',#202796,1.); +#202796 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#202797 = ORIENTED_EDGE('',*,*,#202798,.T.); +#202798 = EDGE_CURVE('',#202791,#202799,#202801,.T.); +#202799 = VERTEX_POINT('',#202800); +#202800 = CARTESIAN_POINT('',(143.094597,-77.665345,1.585)); +#202801 = LINE('',#202802,#202803); +#202802 = CARTESIAN_POINT('',(143.094597,-77.853739,1.585)); +#202803 = VECTOR('',#202804,1.); +#202804 = DIRECTION('',(0.,1.,0.)); +#202805 = ORIENTED_EDGE('',*,*,#202806,.T.); +#202806 = EDGE_CURVE('',#202799,#202807,#202809,.T.); +#202807 = VERTEX_POINT('',#202808); +#202808 = CARTESIAN_POINT('',(142.972823,-77.543571,1.585)); +#202809 = CIRCLE('',#202810,0.170999251022); +#202810 = AXIS2_PLACEMENT_3D('',#202811,#202812,#202813); +#202811 = CARTESIAN_POINT('',(142.929244,-77.708924,1.585)); +#202812 = DIRECTION('',(0.,0.,1.)); +#202813 = DIRECTION('',(0.966980843553,0.254849069452,-0.)); +#202814 = ORIENTED_EDGE('',*,*,#202815,.T.); +#202815 = EDGE_CURVE('',#202807,#202816,#202818,.T.); +#202816 = VERTEX_POINT('',#202817); +#202817 = CARTESIAN_POINT('',(142.917799,-77.543571,1.585)); +#202818 = LINE('',#202819,#202820); +#202819 = CARTESIAN_POINT('',(142.972823,-77.543571,1.585)); +#202820 = VECTOR('',#202821,1.); +#202821 = DIRECTION('',(-1.,0.,0.)); +#202822 = ORIENTED_EDGE('',*,*,#202823,.T.); +#202823 = EDGE_CURVE('',#202816,#202824,#202826,.T.); +#202824 = VERTEX_POINT('',#202825); +#202825 = CARTESIAN_POINT('',(142.855243,-77.574849,1.585)); +#202826 = LINE('',#202827,#202828); +#202827 = CARTESIAN_POINT('',(142.917799,-77.543571,1.585)); +#202828 = VECTOR('',#202829,1.); +#202829 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#202830 = ORIENTED_EDGE('',*,*,#202831,.T.); +#202831 = EDGE_CURVE('',#202824,#202832,#202834,.T.); +#202832 = VERTEX_POINT('',#202833); +#202833 = CARTESIAN_POINT('',(142.827303,-77.602789,1.585)); +#202834 = LINE('',#202835,#202836); +#202835 = CARTESIAN_POINT('',(142.855243,-77.574849,1.585)); +#202836 = VECTOR('',#202837,1.); +#202837 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#202838 = ORIENTED_EDGE('',*,*,#202839,.T.); +#202839 = EDGE_CURVE('',#202832,#202840,#202842,.T.); +#202840 = VERTEX_POINT('',#202841); +#202841 = CARTESIAN_POINT('',(142.792353,-77.672689,1.585)); +#202842 = LINE('',#202843,#202844); +#202843 = CARTESIAN_POINT('',(142.827303,-77.602789,1.585)); +#202844 = VECTOR('',#202845,1.); +#202845 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#202846 = ORIENTED_EDGE('',*,*,#202847,.T.); +#202847 = EDGE_CURVE('',#202840,#202848,#202850,.T.); +#202848 = VERTEX_POINT('',#202849); +#202849 = CARTESIAN_POINT('',(142.746306,-77.850497,1.585)); +#202850 = LINE('',#202851,#202852); +#202851 = CARTESIAN_POINT('',(142.792353,-77.672689,1.585)); +#202852 = VECTOR('',#202853,1.); +#202853 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#202854 = ORIENTED_EDGE('',*,*,#202855,.T.); +#202855 = EDGE_CURVE('',#202848,#202856,#202858,.T.); +#202856 = VERTEX_POINT('',#202857); +#202857 = CARTESIAN_POINT('',(142.691273,-77.953105,1.585)); +#202858 = LINE('',#202859,#202860); +#202859 = CARTESIAN_POINT('',(142.746306,-77.850497,1.585)); +#202860 = VECTOR('',#202861,1.); +#202861 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#202862 = ORIENTED_EDGE('',*,*,#202863,.T.); +#202863 = EDGE_CURVE('',#202856,#202864,#202866,.T.); +#202864 = VERTEX_POINT('',#202865); +#202865 = CARTESIAN_POINT('',(142.631523,-78.008138,1.585)); +#202866 = LINE('',#202867,#202868); +#202867 = CARTESIAN_POINT('',(142.691273,-77.953105,1.585)); +#202868 = VECTOR('',#202869,1.); +#202869 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#202870 = ORIENTED_EDGE('',*,*,#202871,.T.); +#202871 = EDGE_CURVE('',#202864,#202872,#202874,.T.); +#202872 = VERTEX_POINT('',#202873); +#202873 = CARTESIAN_POINT('',(142.308013,-78.001751,1.585)); +#202874 = CIRCLE('',#202875,0.260197694649); +#202875 = AXIS2_PLACEMENT_3D('',#202876,#202877,#202878); +#202876 = CARTESIAN_POINT('',(142.47379048924,-77.80120009783,1.585)); +#202877 = DIRECTION('',(-0.,0.,-1.)); +#202878 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#202879 = ORIENTED_EDGE('',*,*,#202880,.T.); +#202880 = EDGE_CURVE('',#202872,#202881,#202883,.T.); +#202881 = VERTEX_POINT('',#202882); +#202882 = CARTESIAN_POINT('',(142.250702,-77.94444,1.585)); +#202883 = LINE('',#202884,#202885); +#202884 = CARTESIAN_POINT('',(142.308013,-78.001751,1.585)); +#202885 = VECTOR('',#202886,1.); +#202886 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202887 = ORIENTED_EDGE('',*,*,#202888,.T.); +#202888 = EDGE_CURVE('',#202881,#202889,#202891,.T.); +#202889 = VERTEX_POINT('',#202890); +#202890 = CARTESIAN_POINT('',(142.197512,-77.836084,1.585)); +#202891 = LINE('',#202892,#202893); +#202892 = CARTESIAN_POINT('',(142.250702,-77.94444,1.585)); +#202893 = VECTOR('',#202894,1.); +#202894 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#202895 = ORIENTED_EDGE('',*,*,#202896,.T.); +#202896 = EDGE_CURVE('',#202889,#202897,#202899,.T.); +#202897 = VERTEX_POINT('',#202898); +#202898 = CARTESIAN_POINT('',(142.19663,-77.59692,1.585)); +#202899 = LINE('',#202900,#202901); +#202900 = CARTESIAN_POINT('',(142.197512,-77.836084,1.585)); +#202901 = VECTOR('',#202902,1.); +#202902 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#202903 = ORIENTED_EDGE('',*,*,#202904,.T.); +#202904 = EDGE_CURVE('',#202897,#202641,#202905,.T.); +#202905 = LINE('',#202906,#202907); +#202906 = CARTESIAN_POINT('',(142.19663,-77.59692,1.585)); +#202907 = VECTOR('',#202908,1.); +#202908 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#202909 = PLANE('',#202910); +#202910 = AXIS2_PLACEMENT_3D('',#202911,#202912,#202913); +#202911 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202912 = DIRECTION('',(0.,0.,1.)); +#202913 = DIRECTION('',(1.,0.,-0.)); +#202914 = SHELL_BASED_SURFACE_MODEL('',(#202915)); +#202915 = OPEN_SHELL('',(#202916)); +#202916 = ADVANCED_FACE('',(#202917),#202961,.T.); +#202917 = FACE_BOUND('',#202918,.F.); +#202918 = EDGE_LOOP('',(#202919,#202930,#202938,#202947,#202955)); +#202919 = ORIENTED_EDGE('',*,*,#202920,.T.); +#202920 = EDGE_CURVE('',#202921,#202923,#202925,.T.); +#202921 = VERTEX_POINT('',#202922); +#202922 = CARTESIAN_POINT('',(119.856688,-77.282269,1.585)); +#202923 = VERTEX_POINT('',#202924); +#202924 = CARTESIAN_POINT('',(119.98174,-77.307143,1.585)); +#202925 = CIRCLE('',#202926,6.499988811649E-02); +#202926 = AXIS2_PLACEMENT_3D('',#202927,#202928,#202929); +#202927 = CARTESIAN_POINT('',(119.91674011188,-77.3071432701,1.585)); +#202928 = DIRECTION('',(0.,0.,-1.)); +#202929 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#202930 = ORIENTED_EDGE('',*,*,#202931,.T.); +#202931 = EDGE_CURVE('',#202923,#202932,#202934,.T.); +#202932 = VERTEX_POINT('',#202933); +#202933 = CARTESIAN_POINT('',(119.98174,-77.992857,1.585)); +#202934 = LINE('',#202935,#202936); +#202935 = CARTESIAN_POINT('',(119.98174,-77.307143,1.585)); +#202936 = VECTOR('',#202937,1.); +#202937 = DIRECTION('',(0.,-1.,0.)); +#202938 = ORIENTED_EDGE('',*,*,#202939,.T.); +#202939 = EDGE_CURVE('',#202932,#202940,#202942,.T.); +#202940 = VERTEX_POINT('',#202941); +#202941 = CARTESIAN_POINT('',(119.85174,-77.992857,1.585)); +#202942 = CIRCLE('',#202943,6.500000000091E-02); +#202943 = AXIS2_PLACEMENT_3D('',#202944,#202945,#202946); +#202944 = CARTESIAN_POINT('',(119.91674,-77.99285665513,1.585)); +#202945 = DIRECTION('',(-0.,0.,-1.)); +#202946 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#202947 = ORIENTED_EDGE('',*,*,#202948,.T.); +#202948 = EDGE_CURVE('',#202940,#202949,#202951,.T.); +#202949 = VERTEX_POINT('',#202950); +#202950 = CARTESIAN_POINT('',(119.85174,-77.307143,1.585)); +#202951 = LINE('',#202952,#202953); +#202952 = CARTESIAN_POINT('',(119.85174,-77.992857,1.585)); +#202953 = VECTOR('',#202954,1.); +#202954 = DIRECTION('',(0.,1.,0.)); +#202955 = ORIENTED_EDGE('',*,*,#202956,.T.); +#202956 = EDGE_CURVE('',#202949,#202921,#202957,.T.); +#202957 = LINE('',#202958,#202959); +#202958 = CARTESIAN_POINT('',(119.85174,-77.307143,1.585)); +#202959 = VECTOR('',#202960,1.); +#202960 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#202961 = PLANE('',#202962); +#202962 = AXIS2_PLACEMENT_3D('',#202963,#202964,#202965); +#202963 = CARTESIAN_POINT('',(0.,0.,1.585)); +#202964 = DIRECTION('',(0.,0.,1.)); +#202965 = DIRECTION('',(1.,0.,-0.)); +#202966 = SHELL_BASED_SURFACE_MODEL('',(#202967)); +#202967 = OPEN_SHELL('',(#202968)); +#202968 = ADVANCED_FACE('',(#202969,#203103),#203162,.T.); +#202969 = FACE_BOUND('',#202970,.F.); +#202970 = EDGE_LOOP('',(#202971,#202982,#202990,#202998,#203006,#203014, + #203022,#203031,#203039,#203047,#203055,#203064,#203072,#203081, + #203089,#203097)); +#202971 = ORIENTED_EDGE('',*,*,#202972,.T.); +#202972 = EDGE_CURVE('',#202973,#202975,#202977,.T.); +#202973 = VERTEX_POINT('',#202974); +#202974 = CARTESIAN_POINT('',(128.508013,-77.462533,1.585)); +#202975 = VERTEX_POINT('',#202976); +#202976 = CARTESIAN_POINT('',(128.788666,-77.41329,1.585)); +#202977 = CIRCLE('',#202978,0.327183487819); +#202978 = AXIS2_PLACEMENT_3D('',#202979,#202980,#202981); +#202979 = CARTESIAN_POINT('',(128.69924076591,-77.72801553472,1.585)); +#202980 = DIRECTION('',(0.,0.,-1.)); +#202981 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#202982 = ORIENTED_EDGE('',*,*,#202983,.T.); +#202983 = EDGE_CURVE('',#202975,#202984,#202986,.T.); +#202984 = VERTEX_POINT('',#202985); +#202985 = CARTESIAN_POINT('',(128.891273,-77.468323,1.585)); +#202986 = LINE('',#202987,#202988); +#202987 = CARTESIAN_POINT('',(128.788666,-77.41329,1.585)); +#202988 = VECTOR('',#202989,1.); +#202989 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#202990 = ORIENTED_EDGE('',*,*,#202991,.T.); +#202991 = EDGE_CURVE('',#202984,#202992,#202994,.T.); +#202992 = VERTEX_POINT('',#202993); +#202993 = CARTESIAN_POINT('',(128.946306,-77.528073,1.585)); +#202994 = LINE('',#202995,#202996); +#202995 = CARTESIAN_POINT('',(128.891273,-77.468323,1.585)); +#202996 = VECTOR('',#202997,1.); +#202997 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#202998 = ORIENTED_EDGE('',*,*,#202999,.T.); +#202999 = EDGE_CURVE('',#202992,#203000,#203002,.T.); +#203000 = VERTEX_POINT('',#203001); +#203001 = CARTESIAN_POINT('',(128.993109,-77.6282,1.585)); +#203002 = LINE('',#203003,#203004); +#203003 = CARTESIAN_POINT('',(128.946306,-77.528073,1.585)); +#203004 = VECTOR('',#203005,1.); +#203005 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#203006 = ORIENTED_EDGE('',*,*,#203007,.T.); +#203007 = EDGE_CURVE('',#203000,#203008,#203010,.T.); +#203008 = VERTEX_POINT('',#203009); +#203009 = CARTESIAN_POINT('',(128.996025,-77.646585,1.585)); +#203010 = LINE('',#203011,#203012); +#203011 = CARTESIAN_POINT('',(128.993109,-77.6282,1.585)); +#203012 = VECTOR('',#203013,1.); +#203013 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#203014 = ORIENTED_EDGE('',*,*,#203015,.T.); +#203015 = EDGE_CURVE('',#203008,#203016,#203018,.T.); +#203016 = VERTEX_POINT('',#203017); +#203017 = CARTESIAN_POINT('',(129.322322,-77.418178,1.585)); +#203018 = LINE('',#203019,#203020); +#203019 = CARTESIAN_POINT('',(128.996025,-77.646585,1.585)); +#203020 = VECTOR('',#203021,1.); +#203021 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#203022 = ORIENTED_EDGE('',*,*,#203023,.T.); +#203023 = EDGE_CURVE('',#203016,#203024,#203026,.T.); +#203024 = VERTEX_POINT('',#203025); +#203025 = CARTESIAN_POINT('',(129.396872,-77.524678,1.585)); +#203026 = CIRCLE('',#203027,6.499990865383E-02); +#203027 = AXIS2_PLACEMENT_3D('',#203028,#203029,#203030); +#203028 = CARTESIAN_POINT('',(129.35959707222,-77.47142794944,1.585)); +#203029 = DIRECTION('',(0.,0.,-1.)); +#203030 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#203031 = ORIENTED_EDGE('',*,*,#203032,.T.); +#203032 = EDGE_CURVE('',#203024,#203033,#203035,.T.); +#203033 = VERTEX_POINT('',#203034); +#203034 = CARTESIAN_POINT('',(128.996025,-77.80527,1.585)); +#203035 = LINE('',#203036,#203037); +#203036 = CARTESIAN_POINT('',(129.396872,-77.524678,1.585)); +#203037 = VECTOR('',#203038,1.); +#203038 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#203039 = ORIENTED_EDGE('',*,*,#203040,.T.); +#203040 = EDGE_CURVE('',#203033,#203041,#203043,.T.); +#203041 = VERTEX_POINT('',#203042); +#203042 = CARTESIAN_POINT('',(128.996025,-77.920714,1.585)); +#203043 = LINE('',#203044,#203045); +#203044 = CARTESIAN_POINT('',(128.996025,-77.80527,1.585)); +#203045 = VECTOR('',#203046,1.); +#203046 = DIRECTION('',(0.,-1.,0.)); +#203047 = ORIENTED_EDGE('',*,*,#203048,.T.); +#203048 = EDGE_CURVE('',#203041,#203049,#203051,.T.); +#203049 = VERTEX_POINT('',#203050); +#203050 = CARTESIAN_POINT('',(129.359597,-77.920714,1.585)); +#203051 = LINE('',#203052,#203053); +#203052 = CARTESIAN_POINT('',(128.996025,-77.920714,1.585)); +#203053 = VECTOR('',#203054,1.); +#203054 = DIRECTION('',(1.,0.,0.)); +#203055 = ORIENTED_EDGE('',*,*,#203056,.T.); +#203056 = EDGE_CURVE('',#203049,#203057,#203059,.T.); +#203057 = VERTEX_POINT('',#203058); +#203058 = CARTESIAN_POINT('',(129.359597,-78.050714,1.585)); +#203059 = CIRCLE('',#203060,6.500000000091E-02); +#203060 = AXIS2_PLACEMENT_3D('',#203061,#203062,#203063); +#203061 = CARTESIAN_POINT('',(129.35959665513,-77.985714,1.585)); +#203062 = DIRECTION('',(0.,0.,-1.)); +#203063 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#203064 = ORIENTED_EDGE('',*,*,#203065,.T.); +#203065 = EDGE_CURVE('',#203057,#203066,#203068,.T.); +#203066 = VERTEX_POINT('',#203067); +#203067 = CARTESIAN_POINT('',(128.459597,-78.050714,1.585)); +#203068 = LINE('',#203069,#203070); +#203069 = CARTESIAN_POINT('',(129.359597,-78.050714,1.585)); +#203070 = VECTOR('',#203071,1.); +#203071 = DIRECTION('',(-1.,0.,0.)); +#203072 = ORIENTED_EDGE('',*,*,#203073,.T.); +#203073 = EDGE_CURVE('',#203066,#203074,#203076,.T.); +#203074 = VERTEX_POINT('',#203075); +#203075 = CARTESIAN_POINT('',(128.394597,-77.985714,1.585)); +#203076 = CIRCLE('',#203077,6.500103935387E-02); +#203077 = AXIS2_PLACEMENT_3D('',#203078,#203079,#203080); +#203078 = CARTESIAN_POINT('',(128.45959803934,-77.98571296065,1.585)); +#203079 = DIRECTION('',(0.,0.,-1.)); +#203080 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#203081 = ORIENTED_EDGE('',*,*,#203082,.T.); +#203082 = EDGE_CURVE('',#203074,#203083,#203085,.T.); +#203083 = VERTEX_POINT('',#203084); +#203084 = CARTESIAN_POINT('',(128.397512,-77.6282,1.585)); +#203085 = LINE('',#203086,#203087); +#203086 = CARTESIAN_POINT('',(128.394597,-77.985714,1.585)); +#203087 = VECTOR('',#203088,1.); +#203088 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#203089 = ORIENTED_EDGE('',*,*,#203090,.T.); +#203090 = EDGE_CURVE('',#203083,#203091,#203093,.T.); +#203091 = VERTEX_POINT('',#203092); +#203092 = CARTESIAN_POINT('',(128.450702,-77.519844,1.585)); +#203093 = LINE('',#203094,#203095); +#203094 = CARTESIAN_POINT('',(128.397512,-77.6282,1.585)); +#203095 = VECTOR('',#203096,1.); +#203096 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#203097 = ORIENTED_EDGE('',*,*,#203098,.T.); +#203098 = EDGE_CURVE('',#203091,#202973,#203099,.T.); +#203099 = LINE('',#203100,#203101); +#203100 = CARTESIAN_POINT('',(128.450702,-77.519844,1.585)); +#203101 = VECTOR('',#203102,1.); +#203102 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#203103 = FACE_BOUND('',#203104,.F.); +#203104 = EDGE_LOOP('',(#203105,#203116,#203124,#203132,#203140,#203148, + #203156)); +#203105 = ORIENTED_EDGE('',*,*,#203106,.T.); +#203106 = EDGE_CURVE('',#203107,#203109,#203111,.T.); +#203107 = VERTEX_POINT('',#203108); +#203108 = CARTESIAN_POINT('',(128.806808,-77.567706,1.585)); +#203109 = VERTEX_POINT('',#203110); +#203110 = CARTESIAN_POINT('',(128.555875,-77.595644,1.585)); +#203111 = CIRCLE('',#203112,0.180979134862); +#203112 = AXIS2_PLACEMENT_3D('',#203113,#203114,#203115); +#203113 = CARTESIAN_POINT('',(128.69569076987,-77.71055700078,1.585)); +#203114 = DIRECTION('',(0.,0.,1.)); +#203115 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#203116 = ORIENTED_EDGE('',*,*,#203117,.T.); +#203117 = EDGE_CURVE('',#203109,#203118,#203120,.T.); +#203118 = VERTEX_POINT('',#203119); +#203119 = CARTESIAN_POINT('',(128.524597,-77.658201,1.585)); +#203120 = LINE('',#203121,#203122); +#203121 = CARTESIAN_POINT('',(128.555875,-77.595644,1.585)); +#203122 = VECTOR('',#203123,1.); +#203123 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#203124 = ORIENTED_EDGE('',*,*,#203125,.T.); +#203125 = EDGE_CURVE('',#203118,#203126,#203128,.T.); +#203126 = VERTEX_POINT('',#203127); +#203127 = CARTESIAN_POINT('',(128.524597,-77.920714,1.585)); +#203128 = LINE('',#203129,#203130); +#203129 = CARTESIAN_POINT('',(128.524597,-77.658201,1.585)); +#203130 = VECTOR('',#203131,1.); +#203131 = DIRECTION('',(0.,-1.,0.)); +#203132 = ORIENTED_EDGE('',*,*,#203133,.T.); +#203133 = EDGE_CURVE('',#203126,#203134,#203136,.T.); +#203134 = VERTEX_POINT('',#203135); +#203135 = CARTESIAN_POINT('',(128.866025,-77.920714,1.585)); +#203136 = LINE('',#203137,#203138); +#203137 = CARTESIAN_POINT('',(128.524597,-77.920714,1.585)); +#203138 = VECTOR('',#203139,1.); +#203139 = DIRECTION('',(1.,0.,0.)); +#203140 = ORIENTED_EDGE('',*,*,#203141,.T.); +#203141 = EDGE_CURVE('',#203134,#203142,#203144,.T.); +#203142 = VERTEX_POINT('',#203143); +#203143 = CARTESIAN_POINT('',(128.866025,-77.658201,1.585)); +#203144 = LINE('',#203145,#203146); +#203145 = CARTESIAN_POINT('',(128.866025,-77.920714,1.585)); +#203146 = VECTOR('',#203147,1.); +#203147 = DIRECTION('',(0.,1.,0.)); +#203148 = ORIENTED_EDGE('',*,*,#203149,.T.); +#203149 = EDGE_CURVE('',#203142,#203150,#203152,.T.); +#203150 = VERTEX_POINT('',#203151); +#203151 = CARTESIAN_POINT('',(128.834746,-77.595644,1.585)); +#203152 = LINE('',#203153,#203154); +#203153 = CARTESIAN_POINT('',(128.866025,-77.658201,1.585)); +#203154 = VECTOR('',#203155,1.); +#203155 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#203156 = ORIENTED_EDGE('',*,*,#203157,.T.); +#203157 = EDGE_CURVE('',#203150,#203107,#203158,.T.); +#203158 = LINE('',#203159,#203160); +#203159 = CARTESIAN_POINT('',(128.834746,-77.595644,1.585)); +#203160 = VECTOR('',#203161,1.); +#203161 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#203162 = PLANE('',#203163); +#203163 = AXIS2_PLACEMENT_3D('',#203164,#203165,#203166); +#203164 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203165 = DIRECTION('',(0.,0.,1.)); +#203166 = DIRECTION('',(1.,0.,-0.)); +#203167 = SHELL_BASED_SURFACE_MODEL('',(#203168)); +#203168 = OPEN_SHELL('',(#203169)); +#203169 = ADVANCED_FACE('',(#203170),#203442,.T.); +#203170 = FACE_BOUND('',#203171,.F.); +#203171 = EDGE_LOOP('',(#203172,#203183,#203191,#203199,#203208,#203216, + #203224,#203232,#203240,#203248,#203256,#203264,#203273,#203281, + #203289,#203297,#203305,#203313,#203322,#203330,#203338,#203347, + #203355,#203363,#203371,#203379,#203387,#203395,#203403,#203412, + #203420,#203428,#203436)); +#203172 = ORIENTED_EDGE('',*,*,#203173,.T.); +#203173 = EDGE_CURVE('',#203174,#203176,#203178,.T.); +#203174 = VERTEX_POINT('',#203175); +#203175 = CARTESIAN_POINT('',(132.09079,-77.450873,1.585)); +#203176 = VERTEX_POINT('',#203177); +#203177 = CARTESIAN_POINT('',(132.214119,-77.491982,1.585)); +#203178 = CIRCLE('',#203179,6.499998485139E-02); +#203179 = AXIS2_PLACEMENT_3D('',#203180,#203181,#203182); +#203180 = CARTESIAN_POINT('',(132.15245436584,-77.47142790248,1.585)); +#203181 = DIRECTION('',(0.,0.,-1.)); +#203182 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#203183 = ORIENTED_EDGE('',*,*,#203184,.T.); +#203184 = EDGE_CURVE('',#203176,#203185,#203187,.T.); +#203185 = VERTEX_POINT('',#203186); +#203186 = CARTESIAN_POINT('',(132.174597,-77.610547,1.585)); +#203187 = LINE('',#203188,#203189); +#203188 = CARTESIAN_POINT('',(132.214119,-77.491982,1.585)); +#203189 = VECTOR('',#203190,1.); +#203190 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#203191 = ORIENTED_EDGE('',*,*,#203192,.T.); +#203192 = EDGE_CURVE('',#203185,#203193,#203195,.T.); +#203193 = VERTEX_POINT('',#203194); +#203194 = CARTESIAN_POINT('',(132.174597,-77.79894,1.585)); +#203195 = LINE('',#203196,#203197); +#203196 = CARTESIAN_POINT('',(132.174597,-77.610547,1.585)); +#203197 = VECTOR('',#203198,1.); +#203198 = DIRECTION('',(0.,-1.,0.)); +#203199 = ORIENTED_EDGE('',*,*,#203200,.T.); +#203200 = EDGE_CURVE('',#203193,#203201,#203203,.T.); +#203201 = VERTEX_POINT('',#203202); +#203202 = CARTESIAN_POINT('',(132.29637,-77.920714,1.585)); +#203203 = CIRCLE('',#203204,0.170995888391); +#203204 = AXIS2_PLACEMENT_3D('',#203205,#203206,#203207); +#203205 = CARTESIAN_POINT('',(132.3399473225,-77.75536403534,1.585)); +#203206 = DIRECTION('',(0.,0.,1.)); +#203207 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#203208 = ORIENTED_EDGE('',*,*,#203209,.T.); +#203209 = EDGE_CURVE('',#203201,#203210,#203212,.T.); +#203210 = VERTEX_POINT('',#203211); +#203211 = CARTESIAN_POINT('',(132.351395,-77.920714,1.585)); +#203212 = LINE('',#203213,#203214); +#203213 = CARTESIAN_POINT('',(132.29637,-77.920714,1.585)); +#203214 = VECTOR('',#203215,1.); +#203215 = DIRECTION('',(1.,0.,0.)); +#203216 = ORIENTED_EDGE('',*,*,#203217,.T.); +#203217 = EDGE_CURVE('',#203210,#203218,#203220,.T.); +#203218 = VERTEX_POINT('',#203219); +#203219 = CARTESIAN_POINT('',(132.413951,-77.889436,1.585)); +#203220 = LINE('',#203221,#203222); +#203221 = CARTESIAN_POINT('',(132.351395,-77.920714,1.585)); +#203222 = VECTOR('',#203223,1.); +#203223 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#203224 = ORIENTED_EDGE('',*,*,#203225,.T.); +#203225 = EDGE_CURVE('',#203218,#203226,#203228,.T.); +#203226 = VERTEX_POINT('',#203227); +#203227 = CARTESIAN_POINT('',(132.441889,-77.861497,1.585)); +#203228 = LINE('',#203229,#203230); +#203229 = CARTESIAN_POINT('',(132.413951,-77.889436,1.585)); +#203230 = VECTOR('',#203231,1.); +#203231 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#203232 = ORIENTED_EDGE('',*,*,#203233,.T.); +#203233 = EDGE_CURVE('',#203226,#203234,#203236,.T.); +#203234 = VERTEX_POINT('',#203235); +#203235 = CARTESIAN_POINT('',(132.476839,-77.791596,1.585)); +#203236 = LINE('',#203237,#203238); +#203237 = CARTESIAN_POINT('',(132.441889,-77.861497,1.585)); +#203238 = VECTOR('',#203239,1.); +#203239 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#203240 = ORIENTED_EDGE('',*,*,#203241,.T.); +#203241 = EDGE_CURVE('',#203234,#203242,#203244,.T.); +#203242 = VERTEX_POINT('',#203243); +#203243 = CARTESIAN_POINT('',(132.522887,-77.613788,1.585)); +#203244 = LINE('',#203245,#203246); +#203245 = CARTESIAN_POINT('',(132.476839,-77.791596,1.585)); +#203246 = VECTOR('',#203247,1.); +#203247 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#203248 = ORIENTED_EDGE('',*,*,#203249,.T.); +#203249 = EDGE_CURVE('',#203242,#203250,#203252,.T.); +#203250 = VERTEX_POINT('',#203251); +#203251 = CARTESIAN_POINT('',(132.57792,-77.511181,1.585)); +#203252 = LINE('',#203253,#203254); +#203253 = CARTESIAN_POINT('',(132.522887,-77.613788,1.585)); +#203254 = VECTOR('',#203255,1.); +#203255 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#203256 = ORIENTED_EDGE('',*,*,#203257,.T.); +#203257 = EDGE_CURVE('',#203250,#203258,#203260,.T.); +#203258 = VERTEX_POINT('',#203259); +#203259 = CARTESIAN_POINT('',(132.637671,-77.456147,1.585)); +#203260 = LINE('',#203261,#203262); +#203261 = CARTESIAN_POINT('',(132.57792,-77.511181,1.585)); +#203262 = VECTOR('',#203263,1.); +#203263 = DIRECTION('',(0.735543975152,0.677476981615,0.)); +#203264 = ORIENTED_EDGE('',*,*,#203265,.T.); +#203265 = EDGE_CURVE('',#203258,#203266,#203268,.T.); +#203266 = VERTEX_POINT('',#203267); +#203267 = CARTESIAN_POINT('',(132.867237,-77.41329,1.585)); +#203268 = CIRCLE('',#203269,0.258971949836); +#203269 = AXIS2_PLACEMENT_3D('',#203270,#203271,#203272); +#203270 = CARTESIAN_POINT('',(132.79487456064,-77.66194668736,1.585)); +#203271 = DIRECTION('',(0.,0.,-1.)); +#203272 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#203273 = ORIENTED_EDGE('',*,*,#203274,.T.); +#203274 = EDGE_CURVE('',#203266,#203275,#203277,.T.); +#203275 = VERTEX_POINT('',#203276); +#203276 = CARTESIAN_POINT('',(132.969844,-77.468323,1.585)); +#203277 = LINE('',#203278,#203279); +#203278 = CARTESIAN_POINT('',(132.867237,-77.41329,1.585)); +#203279 = VECTOR('',#203280,1.); +#203280 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#203281 = ORIENTED_EDGE('',*,*,#203282,.T.); +#203282 = EDGE_CURVE('',#203275,#203283,#203285,.T.); +#203283 = VERTEX_POINT('',#203284); +#203284 = CARTESIAN_POINT('',(133.024878,-77.528074,1.585)); +#203285 = LINE('',#203286,#203287); +#203286 = CARTESIAN_POINT('',(132.969844,-77.468323,1.585)); +#203287 = VECTOR('',#203288,1.); +#203288 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#203289 = ORIENTED_EDGE('',*,*,#203290,.T.); +#203290 = EDGE_CURVE('',#203283,#203291,#203293,.T.); +#203291 = VERTEX_POINT('',#203292); +#203292 = CARTESIAN_POINT('',(133.071681,-77.6282,1.585)); +#203293 = LINE('',#203294,#203295); +#203294 = CARTESIAN_POINT('',(133.024878,-77.528074,1.585)); +#203295 = VECTOR('',#203296,1.); +#203296 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#203297 = ORIENTED_EDGE('',*,*,#203298,.T.); +#203298 = EDGE_CURVE('',#203291,#203299,#203301,.T.); +#203299 = VERTEX_POINT('',#203300); +#203300 = CARTESIAN_POINT('',(133.072563,-77.867365,1.585)); +#203301 = LINE('',#203302,#203303); +#203302 = CARTESIAN_POINT('',(133.071681,-77.6282,1.585)); +#203303 = VECTOR('',#203304,1.); +#203304 = DIRECTION('',(3.687805500009E-03,-0.999993200022,0.)); +#203305 = ORIENTED_EDGE('',*,*,#203306,.T.); +#203306 = EDGE_CURVE('',#203299,#203307,#203309,.T.); +#203307 = VERTEX_POINT('',#203308); +#203308 = CARTESIAN_POINT('',(133.028404,-78.006269,1.585)); +#203309 = LINE('',#203310,#203311); +#203310 = CARTESIAN_POINT('',(133.072563,-77.867365,1.585)); +#203311 = VECTOR('',#203312,1.); +#203312 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#203313 = ORIENTED_EDGE('',*,*,#203314,.T.); +#203314 = EDGE_CURVE('',#203307,#203315,#203317,.T.); +#203315 = VERTEX_POINT('',#203316); +#203316 = CARTESIAN_POINT('',(132.905076,-77.965159,1.585)); +#203317 = CIRCLE('',#203318,6.499966862257E-02); +#203318 = AXIS2_PLACEMENT_3D('',#203319,#203320,#203321); +#203319 = CARTESIAN_POINT('',(132.96674006734,-77.98571379797,1.585)); +#203320 = DIRECTION('',(-0.,0.,-1.)); +#203321 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#203322 = ORIENTED_EDGE('',*,*,#203323,.T.); +#203323 = EDGE_CURVE('',#203315,#203324,#203326,.T.); +#203324 = VERTEX_POINT('',#203325); +#203325 = CARTESIAN_POINT('',(132.944597,-77.846596,1.585)); +#203326 = LINE('',#203327,#203328); +#203327 = CARTESIAN_POINT('',(132.905076,-77.965159,1.585)); +#203328 = VECTOR('',#203329,1.); +#203329 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#203330 = ORIENTED_EDGE('',*,*,#203331,.T.); +#203331 = EDGE_CURVE('',#203324,#203332,#203334,.T.); +#203332 = VERTEX_POINT('',#203333); +#203333 = CARTESIAN_POINT('',(132.944597,-77.658202,1.585)); +#203334 = LINE('',#203335,#203336); +#203335 = CARTESIAN_POINT('',(132.944597,-77.846596,1.585)); +#203336 = VECTOR('',#203337,1.); +#203337 = DIRECTION('',(0.,1.,0.)); +#203338 = ORIENTED_EDGE('',*,*,#203339,.T.); +#203339 = EDGE_CURVE('',#203332,#203340,#203342,.T.); +#203340 = VERTEX_POINT('',#203341); +#203341 = CARTESIAN_POINT('',(132.822823,-77.536428,1.585)); +#203342 = CIRCLE('',#203343,0.170999251022); +#203343 = AXIS2_PLACEMENT_3D('',#203344,#203345,#203346); +#203344 = CARTESIAN_POINT('',(132.779244,-77.701781,1.585)); +#203345 = DIRECTION('',(0.,0.,1.)); +#203346 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#203347 = ORIENTED_EDGE('',*,*,#203348,.T.); +#203348 = EDGE_CURVE('',#203340,#203349,#203351,.T.); +#203349 = VERTEX_POINT('',#203350); +#203350 = CARTESIAN_POINT('',(132.767799,-77.536428,1.585)); +#203351 = LINE('',#203352,#203353); +#203352 = CARTESIAN_POINT('',(132.822823,-77.536428,1.585)); +#203353 = VECTOR('',#203354,1.); +#203354 = DIRECTION('',(-1.,0.,0.)); +#203355 = ORIENTED_EDGE('',*,*,#203356,.T.); +#203356 = EDGE_CURVE('',#203349,#203357,#203359,.T.); +#203357 = VERTEX_POINT('',#203358); +#203358 = CARTESIAN_POINT('',(132.705243,-77.567706,1.585)); +#203359 = LINE('',#203360,#203361); +#203360 = CARTESIAN_POINT('',(132.767799,-77.536428,1.585)); +#203361 = VECTOR('',#203362,1.); +#203362 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#203363 = ORIENTED_EDGE('',*,*,#203364,.T.); +#203364 = EDGE_CURVE('',#203357,#203365,#203367,.T.); +#203365 = VERTEX_POINT('',#203366); +#203366 = CARTESIAN_POINT('',(132.677303,-77.595646,1.585)); +#203367 = LINE('',#203368,#203369); +#203368 = CARTESIAN_POINT('',(132.705243,-77.567706,1.585)); +#203369 = VECTOR('',#203370,1.); +#203370 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203371 = ORIENTED_EDGE('',*,*,#203372,.T.); +#203372 = EDGE_CURVE('',#203365,#203373,#203375,.T.); +#203373 = VERTEX_POINT('',#203374); +#203374 = CARTESIAN_POINT('',(132.642353,-77.665546,1.585)); +#203375 = LINE('',#203376,#203377); +#203376 = CARTESIAN_POINT('',(132.677303,-77.595646,1.585)); +#203377 = VECTOR('',#203378,1.); +#203378 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#203379 = ORIENTED_EDGE('',*,*,#203380,.T.); +#203380 = EDGE_CURVE('',#203373,#203381,#203383,.T.); +#203381 = VERTEX_POINT('',#203382); +#203382 = CARTESIAN_POINT('',(132.596306,-77.843354,1.585)); +#203383 = LINE('',#203384,#203385); +#203384 = CARTESIAN_POINT('',(132.642353,-77.665546,1.585)); +#203385 = VECTOR('',#203386,1.); +#203386 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#203387 = ORIENTED_EDGE('',*,*,#203388,.T.); +#203388 = EDGE_CURVE('',#203381,#203389,#203391,.T.); +#203389 = VERTEX_POINT('',#203390); +#203390 = CARTESIAN_POINT('',(132.541273,-77.945962,1.585)); +#203391 = LINE('',#203392,#203393); +#203392 = CARTESIAN_POINT('',(132.596306,-77.843354,1.585)); +#203393 = VECTOR('',#203394,1.); +#203394 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#203395 = ORIENTED_EDGE('',*,*,#203396,.T.); +#203396 = EDGE_CURVE('',#203389,#203397,#203399,.T.); +#203397 = VERTEX_POINT('',#203398); +#203398 = CARTESIAN_POINT('',(132.481523,-78.000995,1.585)); +#203399 = LINE('',#203400,#203401); +#203400 = CARTESIAN_POINT('',(132.541273,-77.945962,1.585)); +#203401 = VECTOR('',#203402,1.); +#203402 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#203403 = ORIENTED_EDGE('',*,*,#203404,.T.); +#203404 = EDGE_CURVE('',#203397,#203405,#203407,.T.); +#203405 = VERTEX_POINT('',#203406); +#203406 = CARTESIAN_POINT('',(132.158013,-77.994608,1.585)); +#203407 = CIRCLE('',#203408,0.260197694649); +#203408 = AXIS2_PLACEMENT_3D('',#203409,#203410,#203411); +#203409 = CARTESIAN_POINT('',(132.32379048924,-77.79405709783,1.585)); +#203410 = DIRECTION('',(-0.,0.,-1.)); +#203411 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#203412 = ORIENTED_EDGE('',*,*,#203413,.T.); +#203413 = EDGE_CURVE('',#203405,#203414,#203416,.T.); +#203414 = VERTEX_POINT('',#203415); +#203415 = CARTESIAN_POINT('',(132.100702,-77.937297,1.585)); +#203416 = LINE('',#203417,#203418); +#203417 = CARTESIAN_POINT('',(132.158013,-77.994608,1.585)); +#203418 = VECTOR('',#203419,1.); +#203419 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#203420 = ORIENTED_EDGE('',*,*,#203421,.T.); +#203421 = EDGE_CURVE('',#203414,#203422,#203424,.T.); +#203422 = VERTEX_POINT('',#203423); +#203423 = CARTESIAN_POINT('',(132.047512,-77.828941,1.585)); +#203424 = LINE('',#203425,#203426); +#203425 = CARTESIAN_POINT('',(132.100702,-77.937297,1.585)); +#203426 = VECTOR('',#203427,1.); +#203427 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#203428 = ORIENTED_EDGE('',*,*,#203429,.T.); +#203429 = EDGE_CURVE('',#203422,#203430,#203432,.T.); +#203430 = VERTEX_POINT('',#203431); +#203431 = CARTESIAN_POINT('',(132.04663,-77.589777,1.585)); +#203432 = LINE('',#203433,#203434); +#203433 = CARTESIAN_POINT('',(132.047512,-77.828941,1.585)); +#203434 = VECTOR('',#203435,1.); +#203435 = DIRECTION('',(-3.687820919486E-03,0.999993199965,0.)); +#203436 = ORIENTED_EDGE('',*,*,#203437,.T.); +#203437 = EDGE_CURVE('',#203430,#203174,#203438,.T.); +#203438 = LINE('',#203439,#203440); +#203439 = CARTESIAN_POINT('',(132.04663,-77.589777,1.585)); +#203440 = VECTOR('',#203441,1.); +#203441 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#203442 = PLANE('',#203443); +#203443 = AXIS2_PLACEMENT_3D('',#203444,#203445,#203446); +#203444 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203445 = DIRECTION('',(0.,0.,1.)); +#203446 = DIRECTION('',(1.,0.,-0.)); +#203447 = SHELL_BASED_SURFACE_MODEL('',(#203448)); +#203448 = OPEN_SHELL('',(#203449)); +#203449 = ADVANCED_FACE('',(#203450,#203576,#203643),#203710,.T.); +#203450 = FACE_BOUND('',#203451,.F.); +#203451 = EDGE_LOOP('',(#203452,#203463,#203471,#203479,#203487,#203495, + #203504,#203512,#203521,#203529,#203538,#203546,#203554,#203562, + #203570)); +#203452 = ORIENTED_EDGE('',*,*,#203453,.T.); +#203453 = EDGE_CURVE('',#203454,#203456,#203458,.T.); +#203454 = VERTEX_POINT('',#203455); +#203455 = CARTESIAN_POINT('',(137.664813,-77.441861,1.585)); +#203456 = VERTEX_POINT('',#203457); +#203457 = CARTESIAN_POINT('',(137.937237,-77.399004,1.585)); +#203458 = CIRCLE('',#203459,0.328851911789); +#203459 = AXIS2_PLACEMENT_3D('',#203460,#203461,#203462); +#203460 = CARTESIAN_POINT('',(137.84742108589,-77.71535298681,1.585)); +#203461 = DIRECTION('',(0.,0.,-1.)); +#203462 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#203463 = ORIENTED_EDGE('',*,*,#203464,.T.); +#203464 = EDGE_CURVE('',#203456,#203465,#203467,.T.); +#203465 = VERTEX_POINT('',#203466); +#203466 = CARTESIAN_POINT('',(138.039843,-77.454037,1.585)); +#203467 = LINE('',#203468,#203469); +#203468 = CARTESIAN_POINT('',(137.937237,-77.399004,1.585)); +#203469 = VECTOR('',#203470,1.); +#203470 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#203471 = ORIENTED_EDGE('',*,*,#203472,.T.); +#203472 = EDGE_CURVE('',#203465,#203473,#203475,.T.); +#203473 = VERTEX_POINT('',#203474); +#203474 = CARTESIAN_POINT('',(138.094878,-77.513787,1.585)); +#203475 = LINE('',#203476,#203477); +#203476 = CARTESIAN_POINT('',(138.039843,-77.454037,1.585)); +#203477 = VECTOR('',#203478,1.); +#203478 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#203479 = ORIENTED_EDGE('',*,*,#203480,.T.); +#203480 = EDGE_CURVE('',#203473,#203481,#203483,.T.); +#203481 = VERTEX_POINT('',#203482); +#203482 = CARTESIAN_POINT('',(138.141681,-77.613914,1.585)); +#203483 = LINE('',#203484,#203485); +#203484 = CARTESIAN_POINT('',(138.094878,-77.513787,1.585)); +#203485 = VECTOR('',#203486,1.); +#203486 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#203487 = ORIENTED_EDGE('',*,*,#203488,.T.); +#203488 = EDGE_CURVE('',#203481,#203489,#203491,.T.); +#203489 = VERTEX_POINT('',#203490); +#203490 = CARTESIAN_POINT('',(138.144597,-77.971428,1.585)); +#203491 = LINE('',#203492,#203493); +#203492 = CARTESIAN_POINT('',(138.141681,-77.613914,1.585)); +#203493 = VECTOR('',#203494,1.); +#203494 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#203495 = ORIENTED_EDGE('',*,*,#203496,.T.); +#203496 = EDGE_CURVE('',#203489,#203497,#203499,.T.); +#203497 = VERTEX_POINT('',#203498); +#203498 = CARTESIAN_POINT('',(138.079597,-78.036428,1.585)); +#203499 = CIRCLE('',#203500,6.500103935393E-02); +#203500 = AXIS2_PLACEMENT_3D('',#203501,#203502,#203503); +#203501 = CARTESIAN_POINT('',(138.07959596065,-77.97142696065,1.585)); +#203502 = DIRECTION('',(0.,0.,-1.)); +#203503 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#203504 = ORIENTED_EDGE('',*,*,#203505,.T.); +#203505 = EDGE_CURVE('',#203497,#203506,#203508,.T.); +#203506 = VERTEX_POINT('',#203507); +#203507 = CARTESIAN_POINT('',(137.179597,-78.036428,1.585)); +#203508 = LINE('',#203509,#203510); +#203509 = CARTESIAN_POINT('',(138.079597,-78.036428,1.585)); +#203510 = VECTOR('',#203511,1.); +#203511 = DIRECTION('',(-1.,0.,0.)); +#203512 = ORIENTED_EDGE('',*,*,#203513,.T.); +#203513 = EDGE_CURVE('',#203506,#203514,#203516,.T.); +#203514 = VERTEX_POINT('',#203515); +#203515 = CARTESIAN_POINT('',(137.114597,-77.971428,1.585)); +#203516 = CIRCLE('',#203517,6.500103935387E-02); +#203517 = AXIS2_PLACEMENT_3D('',#203518,#203519,#203520); +#203518 = CARTESIAN_POINT('',(137.17959803934,-77.97142696065,1.585)); +#203519 = DIRECTION('',(0.,0.,-1.)); +#203520 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#203521 = ORIENTED_EDGE('',*,*,#203522,.T.); +#203522 = EDGE_CURVE('',#203514,#203523,#203525,.T.); +#203523 = VERTEX_POINT('',#203524); +#203524 = CARTESIAN_POINT('',(137.117512,-77.656771,1.585)); +#203525 = LINE('',#203526,#203527); +#203526 = CARTESIAN_POINT('',(137.114597,-77.971428,1.585)); +#203527 = VECTOR('',#203528,1.); +#203528 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#203529 = ORIENTED_EDGE('',*,*,#203530,.T.); +#203530 = EDGE_CURVE('',#203523,#203531,#203533,.T.); +#203531 = VERTEX_POINT('',#203532); +#203532 = CARTESIAN_POINT('',(137.336368,-77.437914,1.585)); +#203533 = CIRCLE('',#203534,0.308109459502); +#203534 = AXIS2_PLACEMENT_3D('',#203535,#203536,#203537); +#203535 = CARTESIAN_POINT('',(137.41533145359,-77.73573309279,1.585)); +#203536 = DIRECTION('',(0.,0.,-1.)); +#203537 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#203538 = ORIENTED_EDGE('',*,*,#203539,.T.); +#203539 = EDGE_CURVE('',#203531,#203540,#203542,.T.); +#203540 = VERTEX_POINT('',#203541); +#203541 = CARTESIAN_POINT('',(137.451396,-77.437914,1.585)); +#203542 = LINE('',#203543,#203544); +#203543 = CARTESIAN_POINT('',(137.336368,-77.437914,1.585)); +#203544 = VECTOR('',#203545,1.); +#203545 = DIRECTION('',(1.,0.,0.)); +#203546 = ORIENTED_EDGE('',*,*,#203547,.T.); +#203547 = EDGE_CURVE('',#203540,#203548,#203550,.T.); +#203548 = VERTEX_POINT('',#203549); +#203549 = CARTESIAN_POINT('',(137.559761,-77.491111,1.585)); +#203550 = LINE('',#203551,#203552); +#203551 = CARTESIAN_POINT('',(137.451396,-77.437914,1.585)); +#203552 = VECTOR('',#203553,1.); +#203553 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#203554 = ORIENTED_EDGE('',*,*,#203555,.T.); +#203555 = EDGE_CURVE('',#203548,#203556,#203558,.T.); +#203556 = VERTEX_POINT('',#203557); +#203557 = CARTESIAN_POINT('',(137.590973,-77.517981,1.585)); +#203558 = LINE('',#203559,#203560); +#203559 = CARTESIAN_POINT('',(137.559761,-77.491111,1.585)); +#203560 = VECTOR('',#203561,1.); +#203561 = DIRECTION('',(0.7578528376,-0.652425533331,0.)); +#203562 = ORIENTED_EDGE('',*,*,#203563,.T.); +#203563 = EDGE_CURVE('',#203556,#203564,#203566,.T.); +#203564 = VERTEX_POINT('',#203565); +#203565 = CARTESIAN_POINT('',(137.605063,-77.496894,1.585)); +#203566 = LINE('',#203567,#203568); +#203567 = CARTESIAN_POINT('',(137.590973,-77.517981,1.585)); +#203568 = VECTOR('',#203569,1.); +#203569 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#203570 = ORIENTED_EDGE('',*,*,#203571,.T.); +#203571 = EDGE_CURVE('',#203564,#203454,#203572,.T.); +#203572 = LINE('',#203573,#203574); +#203573 = CARTESIAN_POINT('',(137.605063,-77.496894,1.585)); +#203574 = VECTOR('',#203575,1.); +#203575 = DIRECTION('',(0.73554445943,0.677476455829,0.)); +#203576 = FACE_BOUND('',#203577,.F.); +#203577 = EDGE_LOOP('',(#203578,#203589,#203597,#203605,#203613,#203621, + #203629,#203637)); +#203578 = ORIENTED_EDGE('',*,*,#203579,.T.); +#203579 = EDGE_CURVE('',#203580,#203582,#203584,.T.); +#203580 = VERTEX_POINT('',#203581); +#203581 = CARTESIAN_POINT('',(137.483952,-77.596277,1.585)); +#203582 = VERTEX_POINT('',#203583); +#203583 = CARTESIAN_POINT('',(137.303814,-77.596277,1.585)); +#203584 = CIRCLE('',#203585,0.136032349131); +#203585 = AXIS2_PLACEMENT_3D('',#203586,#203587,#203588); +#203586 = CARTESIAN_POINT('',(137.393883,-77.69822,1.585)); +#203587 = DIRECTION('',(0.,0.,1.)); +#203588 = DIRECTION('',(0.662114567422,0.749402628504,-0.)); +#203589 = ORIENTED_EDGE('',*,*,#203590,.T.); +#203590 = EDGE_CURVE('',#203582,#203591,#203593,.T.); +#203591 = VERTEX_POINT('',#203592); +#203592 = CARTESIAN_POINT('',(137.275876,-77.624215,1.585)); +#203593 = LINE('',#203594,#203595); +#203594 = CARTESIAN_POINT('',(137.303814,-77.596277,1.585)); +#203595 = VECTOR('',#203596,1.); +#203596 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#203597 = ORIENTED_EDGE('',*,*,#203598,.T.); +#203598 = EDGE_CURVE('',#203591,#203599,#203601,.T.); +#203599 = VERTEX_POINT('',#203600); +#203600 = CARTESIAN_POINT('',(137.244597,-77.686773,1.585)); +#203601 = LINE('',#203602,#203603); +#203602 = CARTESIAN_POINT('',(137.275876,-77.624215,1.585)); +#203603 = VECTOR('',#203604,1.); +#203604 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#203605 = ORIENTED_EDGE('',*,*,#203606,.T.); +#203606 = EDGE_CURVE('',#203599,#203607,#203609,.T.); +#203607 = VERTEX_POINT('',#203608); +#203608 = CARTESIAN_POINT('',(137.244597,-77.906428,1.585)); +#203609 = LINE('',#203610,#203611); +#203610 = CARTESIAN_POINT('',(137.244597,-77.686773,1.585)); +#203611 = VECTOR('',#203612,1.); +#203612 = DIRECTION('',(0.,-1.,0.)); +#203613 = ORIENTED_EDGE('',*,*,#203614,.T.); +#203614 = EDGE_CURVE('',#203607,#203615,#203617,.T.); +#203615 = VERTEX_POINT('',#203616); +#203616 = CARTESIAN_POINT('',(137.543168,-77.906428,1.585)); +#203617 = LINE('',#203618,#203619); +#203618 = CARTESIAN_POINT('',(137.244597,-77.906428,1.585)); +#203619 = VECTOR('',#203620,1.); +#203620 = DIRECTION('',(1.,0.,0.)); +#203621 = ORIENTED_EDGE('',*,*,#203622,.T.); +#203622 = EDGE_CURVE('',#203615,#203623,#203625,.T.); +#203623 = VERTEX_POINT('',#203624); +#203624 = CARTESIAN_POINT('',(137.543168,-77.686773,1.585)); +#203625 = LINE('',#203626,#203627); +#203626 = CARTESIAN_POINT('',(137.543168,-77.906428,1.585)); +#203627 = VECTOR('',#203628,1.); +#203628 = DIRECTION('',(0.,1.,0.)); +#203629 = ORIENTED_EDGE('',*,*,#203630,.T.); +#203630 = EDGE_CURVE('',#203623,#203631,#203633,.T.); +#203631 = VERTEX_POINT('',#203632); +#203632 = CARTESIAN_POINT('',(137.511889,-77.624216,1.585)); +#203633 = LINE('',#203634,#203635); +#203634 = CARTESIAN_POINT('',(137.543168,-77.686773,1.585)); +#203635 = VECTOR('',#203636,1.); +#203636 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#203637 = ORIENTED_EDGE('',*,*,#203638,.T.); +#203638 = EDGE_CURVE('',#203631,#203580,#203639,.T.); +#203639 = LINE('',#203640,#203641); +#203640 = CARTESIAN_POINT('',(137.511889,-77.624216,1.585)); +#203641 = VECTOR('',#203642,1.); +#203642 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#203643 = FACE_BOUND('',#203644,.F.); +#203644 = EDGE_LOOP('',(#203645,#203656,#203664,#203672,#203680,#203688, + #203696,#203704)); +#203645 = ORIENTED_EDGE('',*,*,#203646,.T.); +#203646 = EDGE_CURVE('',#203647,#203649,#203651,.T.); +#203647 = VERTEX_POINT('',#203648); +#203648 = CARTESIAN_POINT('',(137.955381,-77.553421,1.585)); +#203649 = VERTEX_POINT('',#203650); +#203650 = CARTESIAN_POINT('',(137.732384,-77.55342,1.585)); +#203651 = CIRCLE('',#203652,0.182756450193); +#203652 = AXIS2_PLACEMENT_3D('',#203653,#203654,#203655); +#203653 = CARTESIAN_POINT('',(137.84388185064,-77.6982238307,1.585)); +#203654 = DIRECTION('',(0.,0.,1.)); +#203655 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#203656 = ORIENTED_EDGE('',*,*,#203657,.T.); +#203657 = EDGE_CURVE('',#203649,#203658,#203660,.T.); +#203658 = VERTEX_POINT('',#203659); +#203659 = CARTESIAN_POINT('',(137.707837,-77.577967,1.585)); +#203660 = LINE('',#203661,#203662); +#203661 = CARTESIAN_POINT('',(137.732384,-77.55342,1.585)); +#203662 = VECTOR('',#203663,1.); +#203663 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#203664 = ORIENTED_EDGE('',*,*,#203665,.T.); +#203665 = EDGE_CURVE('',#203658,#203666,#203668,.T.); +#203666 = VERTEX_POINT('',#203667); +#203667 = CARTESIAN_POINT('',(137.673168,-77.681975,1.585)); +#203668 = LINE('',#203669,#203670); +#203669 = CARTESIAN_POINT('',(137.707837,-77.577967,1.585)); +#203670 = VECTOR('',#203671,1.); +#203671 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#203672 = ORIENTED_EDGE('',*,*,#203673,.T.); +#203673 = EDGE_CURVE('',#203666,#203674,#203676,.T.); +#203674 = VERTEX_POINT('',#203675); +#203675 = CARTESIAN_POINT('',(137.673168,-77.906428,1.585)); +#203676 = LINE('',#203677,#203678); +#203677 = CARTESIAN_POINT('',(137.673168,-77.681975,1.585)); +#203678 = VECTOR('',#203679,1.); +#203679 = DIRECTION('',(0.,-1.,0.)); +#203680 = ORIENTED_EDGE('',*,*,#203681,.T.); +#203681 = EDGE_CURVE('',#203674,#203682,#203684,.T.); +#203682 = VERTEX_POINT('',#203683); +#203683 = CARTESIAN_POINT('',(138.014597,-77.906428,1.585)); +#203684 = LINE('',#203685,#203686); +#203685 = CARTESIAN_POINT('',(137.673168,-77.906428,1.585)); +#203686 = VECTOR('',#203687,1.); +#203687 = DIRECTION('',(1.,0.,0.)); +#203688 = ORIENTED_EDGE('',*,*,#203689,.T.); +#203689 = EDGE_CURVE('',#203682,#203690,#203692,.T.); +#203690 = VERTEX_POINT('',#203691); +#203691 = CARTESIAN_POINT('',(138.014597,-77.643915,1.585)); +#203692 = LINE('',#203693,#203694); +#203693 = CARTESIAN_POINT('',(138.014597,-77.906428,1.585)); +#203694 = VECTOR('',#203695,1.); +#203695 = DIRECTION('',(0.,1.,0.)); +#203696 = ORIENTED_EDGE('',*,*,#203697,.T.); +#203697 = EDGE_CURVE('',#203690,#203698,#203700,.T.); +#203698 = VERTEX_POINT('',#203699); +#203699 = CARTESIAN_POINT('',(137.983318,-77.581358,1.585)); +#203700 = LINE('',#203701,#203702); +#203701 = CARTESIAN_POINT('',(138.014597,-77.643915,1.585)); +#203702 = VECTOR('',#203703,1.); +#203703 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#203704 = ORIENTED_EDGE('',*,*,#203705,.T.); +#203705 = EDGE_CURVE('',#203698,#203647,#203706,.T.); +#203706 = LINE('',#203707,#203708); +#203707 = CARTESIAN_POINT('',(137.983318,-77.581358,1.585)); +#203708 = VECTOR('',#203709,1.); +#203709 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#203710 = PLANE('',#203711); +#203711 = AXIS2_PLACEMENT_3D('',#203712,#203713,#203714); +#203712 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203713 = DIRECTION('',(0.,0.,1.)); +#203714 = DIRECTION('',(1.,0.,-0.)); +#203715 = SHELL_BASED_SURFACE_MODEL('',(#203716)); +#203716 = OPEN_SHELL('',(#203717)); +#203717 = ADVANCED_FACE('',(#203718),#203990,.T.); +#203718 = FACE_BOUND('',#203719,.F.); +#203719 = EDGE_LOOP('',(#203720,#203731,#203739,#203747,#203756,#203764, + #203772,#203780,#203788,#203796,#203804,#203812,#203821,#203829, + #203837,#203845,#203853,#203861,#203870,#203878,#203886,#203895, + #203903,#203911,#203919,#203927,#203935,#203943,#203951,#203960, + #203968,#203976,#203984)); +#203720 = ORIENTED_EDGE('',*,*,#203721,.T.); +#203721 = EDGE_CURVE('',#203722,#203724,#203726,.T.); +#203722 = VERTEX_POINT('',#203723); +#203723 = CARTESIAN_POINT('',(139.70079,-77.436587,1.585)); +#203724 = VERTEX_POINT('',#203725); +#203725 = CARTESIAN_POINT('',(139.824119,-77.477696,1.585)); +#203726 = CIRCLE('',#203727,6.499998485138E-02); +#203727 = AXIS2_PLACEMENT_3D('',#203728,#203729,#203730); +#203728 = CARTESIAN_POINT('',(139.76245436584,-77.45714190248,1.585)); +#203729 = DIRECTION('',(0.,0.,-1.)); +#203730 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#203731 = ORIENTED_EDGE('',*,*,#203732,.T.); +#203732 = EDGE_CURVE('',#203724,#203733,#203735,.T.); +#203733 = VERTEX_POINT('',#203734); +#203734 = CARTESIAN_POINT('',(139.784597,-77.596261,1.585)); +#203735 = LINE('',#203736,#203737); +#203736 = CARTESIAN_POINT('',(139.824119,-77.477696,1.585)); +#203737 = VECTOR('',#203738,1.); +#203738 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#203739 = ORIENTED_EDGE('',*,*,#203740,.T.); +#203740 = EDGE_CURVE('',#203733,#203741,#203743,.T.); +#203741 = VERTEX_POINT('',#203742); +#203742 = CARTESIAN_POINT('',(139.784597,-77.784654,1.585)); +#203743 = LINE('',#203744,#203745); +#203744 = CARTESIAN_POINT('',(139.784597,-77.596261,1.585)); +#203745 = VECTOR('',#203746,1.); +#203746 = DIRECTION('',(0.,-1.,0.)); +#203747 = ORIENTED_EDGE('',*,*,#203748,.T.); +#203748 = EDGE_CURVE('',#203741,#203749,#203751,.T.); +#203749 = VERTEX_POINT('',#203750); +#203750 = CARTESIAN_POINT('',(139.90637,-77.906428,1.585)); +#203751 = CIRCLE('',#203752,0.170995888391); +#203752 = AXIS2_PLACEMENT_3D('',#203753,#203754,#203755); +#203753 = CARTESIAN_POINT('',(139.9499473225,-77.74107803534,1.585)); +#203754 = DIRECTION('',(0.,0.,1.)); +#203755 = DIRECTION('',(-0.966984200949,-0.254836330052,0.)); +#203756 = ORIENTED_EDGE('',*,*,#203757,.T.); +#203757 = EDGE_CURVE('',#203749,#203758,#203760,.T.); +#203758 = VERTEX_POINT('',#203759); +#203759 = CARTESIAN_POINT('',(139.961395,-77.906428,1.585)); +#203760 = LINE('',#203761,#203762); +#203761 = CARTESIAN_POINT('',(139.90637,-77.906428,1.585)); +#203762 = VECTOR('',#203763,1.); +#203763 = DIRECTION('',(1.,0.,0.)); +#203764 = ORIENTED_EDGE('',*,*,#203765,.T.); +#203765 = EDGE_CURVE('',#203758,#203766,#203768,.T.); +#203766 = VERTEX_POINT('',#203767); +#203767 = CARTESIAN_POINT('',(140.023951,-77.87515,1.585)); +#203768 = LINE('',#203769,#203770); +#203769 = CARTESIAN_POINT('',(139.961395,-77.906428,1.585)); +#203770 = VECTOR('',#203771,1.); +#203771 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#203772 = ORIENTED_EDGE('',*,*,#203773,.T.); +#203773 = EDGE_CURVE('',#203766,#203774,#203776,.T.); +#203774 = VERTEX_POINT('',#203775); +#203775 = CARTESIAN_POINT('',(140.051889,-77.847211,1.585)); +#203776 = LINE('',#203777,#203778); +#203777 = CARTESIAN_POINT('',(140.023951,-77.87515,1.585)); +#203778 = VECTOR('',#203779,1.); +#203779 = DIRECTION('',(0.707094126371,0.707119435776,0.)); +#203780 = ORIENTED_EDGE('',*,*,#203781,.T.); +#203781 = EDGE_CURVE('',#203774,#203782,#203784,.T.); +#203782 = VERTEX_POINT('',#203783); +#203783 = CARTESIAN_POINT('',(140.086839,-77.77731,1.585)); +#203784 = LINE('',#203785,#203786); +#203785 = CARTESIAN_POINT('',(140.051889,-77.847211,1.585)); +#203786 = VECTOR('',#203787,1.); +#203787 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#203788 = ORIENTED_EDGE('',*,*,#203789,.T.); +#203789 = EDGE_CURVE('',#203782,#203790,#203792,.T.); +#203790 = VERTEX_POINT('',#203791); +#203791 = CARTESIAN_POINT('',(140.132887,-77.599502,1.585)); +#203792 = LINE('',#203793,#203794); +#203793 = CARTESIAN_POINT('',(140.086839,-77.77731,1.585)); +#203794 = VECTOR('',#203795,1.); +#203795 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#203796 = ORIENTED_EDGE('',*,*,#203797,.T.); +#203797 = EDGE_CURVE('',#203790,#203798,#203800,.T.); +#203798 = VERTEX_POINT('',#203799); +#203799 = CARTESIAN_POINT('',(140.18792,-77.496895,1.585)); +#203800 = LINE('',#203801,#203802); +#203801 = CARTESIAN_POINT('',(140.132887,-77.599502,1.585)); +#203802 = VECTOR('',#203803,1.); +#203803 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#203804 = ORIENTED_EDGE('',*,*,#203805,.T.); +#203805 = EDGE_CURVE('',#203798,#203806,#203808,.T.); +#203806 = VERTEX_POINT('',#203807); +#203807 = CARTESIAN_POINT('',(140.247671,-77.441861,1.585)); +#203808 = LINE('',#203809,#203810); +#203809 = CARTESIAN_POINT('',(140.18792,-77.496895,1.585)); +#203810 = VECTOR('',#203811,1.); +#203811 = DIRECTION('',(0.735543975152,0.677476981615,0.)); +#203812 = ORIENTED_EDGE('',*,*,#203813,.T.); +#203813 = EDGE_CURVE('',#203806,#203814,#203816,.T.); +#203814 = VERTEX_POINT('',#203815); +#203815 = CARTESIAN_POINT('',(140.477237,-77.399004,1.585)); +#203816 = CIRCLE('',#203817,0.258971949836); +#203817 = AXIS2_PLACEMENT_3D('',#203818,#203819,#203820); +#203818 = CARTESIAN_POINT('',(140.40487456064,-77.64766068736,1.585)); +#203819 = DIRECTION('',(0.,0.,-1.)); +#203820 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#203821 = ORIENTED_EDGE('',*,*,#203822,.T.); +#203822 = EDGE_CURVE('',#203814,#203823,#203825,.T.); +#203823 = VERTEX_POINT('',#203824); +#203824 = CARTESIAN_POINT('',(140.579844,-77.454037,1.585)); +#203825 = LINE('',#203826,#203827); +#203826 = CARTESIAN_POINT('',(140.477237,-77.399004,1.585)); +#203827 = VECTOR('',#203828,1.); +#203828 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#203829 = ORIENTED_EDGE('',*,*,#203830,.T.); +#203830 = EDGE_CURVE('',#203823,#203831,#203833,.T.); +#203831 = VERTEX_POINT('',#203832); +#203832 = CARTESIAN_POINT('',(140.634878,-77.513788,1.585)); +#203833 = LINE('',#203834,#203835); +#203834 = CARTESIAN_POINT('',(140.579844,-77.454037,1.585)); +#203835 = VECTOR('',#203836,1.); +#203836 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#203837 = ORIENTED_EDGE('',*,*,#203838,.T.); +#203838 = EDGE_CURVE('',#203831,#203839,#203841,.T.); +#203839 = VERTEX_POINT('',#203840); +#203840 = CARTESIAN_POINT('',(140.681681,-77.613914,1.585)); +#203841 = LINE('',#203842,#203843); +#203842 = CARTESIAN_POINT('',(140.634878,-77.513788,1.585)); +#203843 = VECTOR('',#203844,1.); +#203844 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#203845 = ORIENTED_EDGE('',*,*,#203846,.T.); +#203846 = EDGE_CURVE('',#203839,#203847,#203849,.T.); +#203847 = VERTEX_POINT('',#203848); +#203848 = CARTESIAN_POINT('',(140.682563,-77.853079,1.585)); +#203849 = LINE('',#203850,#203851); +#203850 = CARTESIAN_POINT('',(140.681681,-77.613914,1.585)); +#203851 = VECTOR('',#203852,1.); +#203852 = DIRECTION('',(3.687805500009E-03,-0.999993200022,0.)); +#203853 = ORIENTED_EDGE('',*,*,#203854,.T.); +#203854 = EDGE_CURVE('',#203847,#203855,#203857,.T.); +#203855 = VERTEX_POINT('',#203856); +#203856 = CARTESIAN_POINT('',(140.638404,-77.991983,1.585)); +#203857 = LINE('',#203858,#203859); +#203858 = CARTESIAN_POINT('',(140.682563,-77.853079,1.585)); +#203859 = VECTOR('',#203860,1.); +#203860 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#203861 = ORIENTED_EDGE('',*,*,#203862,.T.); +#203862 = EDGE_CURVE('',#203855,#203863,#203865,.T.); +#203863 = VERTEX_POINT('',#203864); +#203864 = CARTESIAN_POINT('',(140.515076,-77.950873,1.585)); +#203865 = CIRCLE('',#203866,6.499966862259E-02); +#203866 = AXIS2_PLACEMENT_3D('',#203867,#203868,#203869); +#203867 = CARTESIAN_POINT('',(140.57674006734,-77.97142779797,1.585)); +#203868 = DIRECTION('',(-0.,0.,-1.)); +#203869 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#203870 = ORIENTED_EDGE('',*,*,#203871,.T.); +#203871 = EDGE_CURVE('',#203863,#203872,#203874,.T.); +#203872 = VERTEX_POINT('',#203873); +#203873 = CARTESIAN_POINT('',(140.554597,-77.83231,1.585)); +#203874 = LINE('',#203875,#203876); +#203875 = CARTESIAN_POINT('',(140.515076,-77.950873,1.585)); +#203876 = VECTOR('',#203877,1.); +#203877 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#203878 = ORIENTED_EDGE('',*,*,#203879,.T.); +#203879 = EDGE_CURVE('',#203872,#203880,#203882,.T.); +#203880 = VERTEX_POINT('',#203881); +#203881 = CARTESIAN_POINT('',(140.554597,-77.643916,1.585)); +#203882 = LINE('',#203883,#203884); +#203883 = CARTESIAN_POINT('',(140.554597,-77.83231,1.585)); +#203884 = VECTOR('',#203885,1.); +#203885 = DIRECTION('',(0.,1.,0.)); +#203886 = ORIENTED_EDGE('',*,*,#203887,.T.); +#203887 = EDGE_CURVE('',#203880,#203888,#203890,.T.); +#203888 = VERTEX_POINT('',#203889); +#203889 = CARTESIAN_POINT('',(140.432823,-77.522142,1.585)); +#203890 = CIRCLE('',#203891,0.170999251022); +#203891 = AXIS2_PLACEMENT_3D('',#203892,#203893,#203894); +#203892 = CARTESIAN_POINT('',(140.389244,-77.687495,1.585)); +#203893 = DIRECTION('',(0.,0.,1.)); +#203894 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#203895 = ORIENTED_EDGE('',*,*,#203896,.T.); +#203896 = EDGE_CURVE('',#203888,#203897,#203899,.T.); +#203897 = VERTEX_POINT('',#203898); +#203898 = CARTESIAN_POINT('',(140.377799,-77.522142,1.585)); +#203899 = LINE('',#203900,#203901); +#203900 = CARTESIAN_POINT('',(140.432823,-77.522142,1.585)); +#203901 = VECTOR('',#203902,1.); +#203902 = DIRECTION('',(-1.,0.,0.)); +#203903 = ORIENTED_EDGE('',*,*,#203904,.T.); +#203904 = EDGE_CURVE('',#203897,#203905,#203907,.T.); +#203905 = VERTEX_POINT('',#203906); +#203906 = CARTESIAN_POINT('',(140.315243,-77.55342,1.585)); +#203907 = LINE('',#203908,#203909); +#203908 = CARTESIAN_POINT('',(140.377799,-77.522142,1.585)); +#203909 = VECTOR('',#203910,1.); +#203910 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#203911 = ORIENTED_EDGE('',*,*,#203912,.T.); +#203912 = EDGE_CURVE('',#203905,#203913,#203915,.T.); +#203913 = VERTEX_POINT('',#203914); +#203914 = CARTESIAN_POINT('',(140.287303,-77.58136,1.585)); +#203915 = LINE('',#203916,#203917); +#203916 = CARTESIAN_POINT('',(140.315243,-77.55342,1.585)); +#203917 = VECTOR('',#203918,1.); +#203918 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203919 = ORIENTED_EDGE('',*,*,#203920,.T.); +#203920 = EDGE_CURVE('',#203913,#203921,#203923,.T.); +#203921 = VERTEX_POINT('',#203922); +#203922 = CARTESIAN_POINT('',(140.252353,-77.65126,1.585)); +#203923 = LINE('',#203924,#203925); +#203924 = CARTESIAN_POINT('',(140.287303,-77.58136,1.585)); +#203925 = VECTOR('',#203926,1.); +#203926 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#203927 = ORIENTED_EDGE('',*,*,#203928,.T.); +#203928 = EDGE_CURVE('',#203921,#203929,#203931,.T.); +#203929 = VERTEX_POINT('',#203930); +#203930 = CARTESIAN_POINT('',(140.206306,-77.829068,1.585)); +#203931 = LINE('',#203932,#203933); +#203932 = CARTESIAN_POINT('',(140.252353,-77.65126,1.585)); +#203933 = VECTOR('',#203934,1.); +#203934 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#203935 = ORIENTED_EDGE('',*,*,#203936,.T.); +#203936 = EDGE_CURVE('',#203929,#203937,#203939,.T.); +#203937 = VERTEX_POINT('',#203938); +#203938 = CARTESIAN_POINT('',(140.151273,-77.931676,1.585)); +#203939 = LINE('',#203940,#203941); +#203940 = CARTESIAN_POINT('',(140.206306,-77.829068,1.585)); +#203941 = VECTOR('',#203942,1.); +#203942 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#203943 = ORIENTED_EDGE('',*,*,#203944,.T.); +#203944 = EDGE_CURVE('',#203937,#203945,#203947,.T.); +#203945 = VERTEX_POINT('',#203946); +#203946 = CARTESIAN_POINT('',(140.091523,-77.986709,1.585)); +#203947 = LINE('',#203948,#203949); +#203948 = CARTESIAN_POINT('',(140.151273,-77.931676,1.585)); +#203949 = VECTOR('',#203950,1.); +#203950 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#203951 = ORIENTED_EDGE('',*,*,#203952,.T.); +#203952 = EDGE_CURVE('',#203945,#203953,#203955,.T.); +#203953 = VERTEX_POINT('',#203954); +#203954 = CARTESIAN_POINT('',(139.768013,-77.980322,1.585)); +#203955 = CIRCLE('',#203956,0.260197694649); +#203956 = AXIS2_PLACEMENT_3D('',#203957,#203958,#203959); +#203957 = CARTESIAN_POINT('',(139.93379048924,-77.77977109783,1.585)); +#203958 = DIRECTION('',(-0.,0.,-1.)); +#203959 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#203960 = ORIENTED_EDGE('',*,*,#203961,.T.); +#203961 = EDGE_CURVE('',#203953,#203962,#203964,.T.); +#203962 = VERTEX_POINT('',#203963); +#203963 = CARTESIAN_POINT('',(139.710702,-77.923011,1.585)); +#203964 = LINE('',#203965,#203966); +#203965 = CARTESIAN_POINT('',(139.768013,-77.980322,1.585)); +#203966 = VECTOR('',#203967,1.); +#203967 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#203968 = ORIENTED_EDGE('',*,*,#203969,.T.); +#203969 = EDGE_CURVE('',#203962,#203970,#203972,.T.); +#203970 = VERTEX_POINT('',#203971); +#203971 = CARTESIAN_POINT('',(139.657512,-77.814655,1.585)); +#203972 = LINE('',#203973,#203974); +#203973 = CARTESIAN_POINT('',(139.710702,-77.923011,1.585)); +#203974 = VECTOR('',#203975,1.); +#203975 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#203976 = ORIENTED_EDGE('',*,*,#203977,.T.); +#203977 = EDGE_CURVE('',#203970,#203978,#203980,.T.); +#203978 = VERTEX_POINT('',#203979); +#203979 = CARTESIAN_POINT('',(139.65663,-77.575491,1.585)); +#203980 = LINE('',#203981,#203982); +#203981 = CARTESIAN_POINT('',(139.657512,-77.814655,1.585)); +#203982 = VECTOR('',#203983,1.); +#203983 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#203984 = ORIENTED_EDGE('',*,*,#203985,.T.); +#203985 = EDGE_CURVE('',#203978,#203722,#203986,.T.); +#203986 = LINE('',#203987,#203988); +#203987 = CARTESIAN_POINT('',(139.65663,-77.575491,1.585)); +#203988 = VECTOR('',#203989,1.); +#203989 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#203990 = PLANE('',#203991); +#203991 = AXIS2_PLACEMENT_3D('',#203992,#203993,#203994); +#203992 = CARTESIAN_POINT('',(0.,0.,1.585)); +#203993 = DIRECTION('',(0.,0.,1.)); +#203994 = DIRECTION('',(1.,0.,-0.)); +#203995 = SHELL_BASED_SURFACE_MODEL('',(#203996)); +#203996 = OPEN_SHELL('',(#203997)); +#203997 = ADVANCED_FACE('',(#203998,#204124,#204191),#204258,.T.); +#203998 = FACE_BOUND('',#203999,.F.); +#203999 = EDGE_LOOP('',(#204000,#204011,#204019,#204027,#204035,#204043, + #204052,#204060,#204069,#204077,#204086,#204094,#204102,#204110, + #204118)); +#204000 = ORIENTED_EDGE('',*,*,#204001,.T.); +#204001 = EDGE_CURVE('',#204002,#204004,#204006,.T.); +#204002 = VERTEX_POINT('',#204003); +#204003 = CARTESIAN_POINT('',(107.184813,-77.399004,1.585)); +#204004 = VERTEX_POINT('',#204005); +#204005 = CARTESIAN_POINT('',(107.457237,-77.356147,1.585)); +#204006 = CIRCLE('',#204007,0.328851911789); +#204007 = AXIS2_PLACEMENT_3D('',#204008,#204009,#204010); +#204008 = CARTESIAN_POINT('',(107.36742108589,-77.67249598681,1.585)); +#204009 = DIRECTION('',(0.,0.,-1.)); +#204010 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204011 = ORIENTED_EDGE('',*,*,#204012,.T.); +#204012 = EDGE_CURVE('',#204004,#204013,#204015,.T.); +#204013 = VERTEX_POINT('',#204014); +#204014 = CARTESIAN_POINT('',(107.559843,-77.41118,1.585)); +#204015 = LINE('',#204016,#204017); +#204016 = CARTESIAN_POINT('',(107.457237,-77.356147,1.585)); +#204017 = VECTOR('',#204018,1.); +#204018 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204019 = ORIENTED_EDGE('',*,*,#204020,.T.); +#204020 = EDGE_CURVE('',#204013,#204021,#204023,.T.); +#204021 = VERTEX_POINT('',#204022); +#204022 = CARTESIAN_POINT('',(107.614878,-77.47093,1.585)); +#204023 = LINE('',#204024,#204025); +#204024 = CARTESIAN_POINT('',(107.559843,-77.41118,1.585)); +#204025 = VECTOR('',#204026,1.); +#204026 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204027 = ORIENTED_EDGE('',*,*,#204028,.T.); +#204028 = EDGE_CURVE('',#204021,#204029,#204031,.T.); +#204029 = VERTEX_POINT('',#204030); +#204030 = CARTESIAN_POINT('',(107.661681,-77.571057,1.585)); +#204031 = LINE('',#204032,#204033); +#204032 = CARTESIAN_POINT('',(107.614878,-77.47093,1.585)); +#204033 = VECTOR('',#204034,1.); +#204034 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204035 = ORIENTED_EDGE('',*,*,#204036,.T.); +#204036 = EDGE_CURVE('',#204029,#204037,#204039,.T.); +#204037 = VERTEX_POINT('',#204038); +#204038 = CARTESIAN_POINT('',(107.664597,-77.928571,1.585)); +#204039 = LINE('',#204040,#204041); +#204040 = CARTESIAN_POINT('',(107.661681,-77.571057,1.585)); +#204041 = VECTOR('',#204042,1.); +#204042 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#204043 = ORIENTED_EDGE('',*,*,#204044,.T.); +#204044 = EDGE_CURVE('',#204037,#204045,#204047,.T.); +#204045 = VERTEX_POINT('',#204046); +#204046 = CARTESIAN_POINT('',(107.599597,-77.993571,1.585)); +#204047 = CIRCLE('',#204048,6.500103935388E-02); +#204048 = AXIS2_PLACEMENT_3D('',#204049,#204050,#204051); +#204049 = CARTESIAN_POINT('',(107.59959596065,-77.92856996065,1.585)); +#204050 = DIRECTION('',(0.,0.,-1.)); +#204051 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#204052 = ORIENTED_EDGE('',*,*,#204053,.T.); +#204053 = EDGE_CURVE('',#204045,#204054,#204056,.T.); +#204054 = VERTEX_POINT('',#204055); +#204055 = CARTESIAN_POINT('',(106.699597,-77.993571,1.585)); +#204056 = LINE('',#204057,#204058); +#204057 = CARTESIAN_POINT('',(107.599597,-77.993571,1.585)); +#204058 = VECTOR('',#204059,1.); +#204059 = DIRECTION('',(-1.,0.,0.)); +#204060 = ORIENTED_EDGE('',*,*,#204061,.T.); +#204061 = EDGE_CURVE('',#204054,#204062,#204064,.T.); +#204062 = VERTEX_POINT('',#204063); +#204063 = CARTESIAN_POINT('',(106.634597,-77.928571,1.585)); +#204064 = CIRCLE('',#204065,6.50010393539E-02); +#204065 = AXIS2_PLACEMENT_3D('',#204066,#204067,#204068); +#204066 = CARTESIAN_POINT('',(106.69959803934,-77.92856996065,1.585)); +#204067 = DIRECTION('',(0.,0.,-1.)); +#204068 = DIRECTION('',(-1.598967649219E-05,-0.999999999872,-0.)); +#204069 = ORIENTED_EDGE('',*,*,#204070,.T.); +#204070 = EDGE_CURVE('',#204062,#204071,#204073,.T.); +#204071 = VERTEX_POINT('',#204072); +#204072 = CARTESIAN_POINT('',(106.637512,-77.613914,1.585)); +#204073 = LINE('',#204074,#204075); +#204074 = CARTESIAN_POINT('',(106.634597,-77.928571,1.585)); +#204075 = VECTOR('',#204076,1.); +#204076 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#204077 = ORIENTED_EDGE('',*,*,#204078,.T.); +#204078 = EDGE_CURVE('',#204071,#204079,#204081,.T.); +#204079 = VERTEX_POINT('',#204080); +#204080 = CARTESIAN_POINT('',(106.856368,-77.395057,1.585)); +#204081 = CIRCLE('',#204082,0.308109459502); +#204082 = AXIS2_PLACEMENT_3D('',#204083,#204084,#204085); +#204083 = CARTESIAN_POINT('',(106.93533145359,-77.69287609279,1.585)); +#204084 = DIRECTION('',(0.,0.,-1.)); +#204085 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204086 = ORIENTED_EDGE('',*,*,#204087,.T.); +#204087 = EDGE_CURVE('',#204079,#204088,#204090,.T.); +#204088 = VERTEX_POINT('',#204089); +#204089 = CARTESIAN_POINT('',(106.971396,-77.395057,1.585)); +#204090 = LINE('',#204091,#204092); +#204091 = CARTESIAN_POINT('',(106.856368,-77.395057,1.585)); +#204092 = VECTOR('',#204093,1.); +#204093 = DIRECTION('',(1.,0.,0.)); +#204094 = ORIENTED_EDGE('',*,*,#204095,.T.); +#204095 = EDGE_CURVE('',#204088,#204096,#204098,.T.); +#204096 = VERTEX_POINT('',#204097); +#204097 = CARTESIAN_POINT('',(107.079761,-77.448254,1.585)); +#204098 = LINE('',#204099,#204100); +#204099 = CARTESIAN_POINT('',(106.971396,-77.395057,1.585)); +#204100 = VECTOR('',#204101,1.); +#204101 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204102 = ORIENTED_EDGE('',*,*,#204103,.T.); +#204103 = EDGE_CURVE('',#204096,#204104,#204106,.T.); +#204104 = VERTEX_POINT('',#204105); +#204105 = CARTESIAN_POINT('',(107.110973,-77.475124,1.585)); +#204106 = LINE('',#204107,#204108); +#204107 = CARTESIAN_POINT('',(107.079761,-77.448254,1.585)); +#204108 = VECTOR('',#204109,1.); +#204109 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204110 = ORIENTED_EDGE('',*,*,#204111,.T.); +#204111 = EDGE_CURVE('',#204104,#204112,#204114,.T.); +#204112 = VERTEX_POINT('',#204113); +#204113 = CARTESIAN_POINT('',(107.125063,-77.454037,1.585)); +#204114 = LINE('',#204115,#204116); +#204115 = CARTESIAN_POINT('',(107.110973,-77.475124,1.585)); +#204116 = VECTOR('',#204117,1.); +#204117 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204118 = ORIENTED_EDGE('',*,*,#204119,.T.); +#204119 = EDGE_CURVE('',#204112,#204002,#204120,.T.); +#204120 = LINE('',#204121,#204122); +#204121 = CARTESIAN_POINT('',(107.125063,-77.454037,1.585)); +#204122 = VECTOR('',#204123,1.); +#204123 = DIRECTION('',(0.73554445943,0.677476455829,0.)); +#204124 = FACE_BOUND('',#204125,.F.); +#204125 = EDGE_LOOP('',(#204126,#204137,#204145,#204153,#204161,#204169, + #204177,#204185)); +#204126 = ORIENTED_EDGE('',*,*,#204127,.T.); +#204127 = EDGE_CURVE('',#204128,#204130,#204132,.T.); +#204128 = VERTEX_POINT('',#204129); +#204129 = CARTESIAN_POINT('',(107.003952,-77.55342,1.585)); +#204130 = VERTEX_POINT('',#204131); +#204131 = CARTESIAN_POINT('',(106.823814,-77.55342,1.585)); +#204132 = CIRCLE('',#204133,0.136032349131); +#204133 = AXIS2_PLACEMENT_3D('',#204134,#204135,#204136); +#204134 = CARTESIAN_POINT('',(106.913883,-77.655363,1.585)); +#204135 = DIRECTION('',(0.,0.,1.)); +#204136 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204137 = ORIENTED_EDGE('',*,*,#204138,.T.); +#204138 = EDGE_CURVE('',#204130,#204139,#204141,.T.); +#204139 = VERTEX_POINT('',#204140); +#204140 = CARTESIAN_POINT('',(106.795876,-77.581358,1.585)); +#204141 = LINE('',#204142,#204143); +#204142 = CARTESIAN_POINT('',(106.823814,-77.55342,1.585)); +#204143 = VECTOR('',#204144,1.); +#204144 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204145 = ORIENTED_EDGE('',*,*,#204146,.T.); +#204146 = EDGE_CURVE('',#204139,#204147,#204149,.T.); +#204147 = VERTEX_POINT('',#204148); +#204148 = CARTESIAN_POINT('',(106.764597,-77.643916,1.585)); +#204149 = LINE('',#204150,#204151); +#204150 = CARTESIAN_POINT('',(106.795876,-77.581358,1.585)); +#204151 = VECTOR('',#204152,1.); +#204152 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204153 = ORIENTED_EDGE('',*,*,#204154,.T.); +#204154 = EDGE_CURVE('',#204147,#204155,#204157,.T.); +#204155 = VERTEX_POINT('',#204156); +#204156 = CARTESIAN_POINT('',(106.764597,-77.863571,1.585)); +#204157 = LINE('',#204158,#204159); +#204158 = CARTESIAN_POINT('',(106.764597,-77.643916,1.585)); +#204159 = VECTOR('',#204160,1.); +#204160 = DIRECTION('',(0.,-1.,0.)); +#204161 = ORIENTED_EDGE('',*,*,#204162,.T.); +#204162 = EDGE_CURVE('',#204155,#204163,#204165,.T.); +#204163 = VERTEX_POINT('',#204164); +#204164 = CARTESIAN_POINT('',(107.063168,-77.863571,1.585)); +#204165 = LINE('',#204166,#204167); +#204166 = CARTESIAN_POINT('',(106.764597,-77.863571,1.585)); +#204167 = VECTOR('',#204168,1.); +#204168 = DIRECTION('',(1.,0.,0.)); +#204169 = ORIENTED_EDGE('',*,*,#204170,.T.); +#204170 = EDGE_CURVE('',#204163,#204171,#204173,.T.); +#204171 = VERTEX_POINT('',#204172); +#204172 = CARTESIAN_POINT('',(107.063168,-77.643916,1.585)); +#204173 = LINE('',#204174,#204175); +#204174 = CARTESIAN_POINT('',(107.063168,-77.863571,1.585)); +#204175 = VECTOR('',#204176,1.); +#204176 = DIRECTION('',(0.,1.,0.)); +#204177 = ORIENTED_EDGE('',*,*,#204178,.T.); +#204178 = EDGE_CURVE('',#204171,#204179,#204181,.T.); +#204179 = VERTEX_POINT('',#204180); +#204180 = CARTESIAN_POINT('',(107.031889,-77.581359,1.585)); +#204181 = LINE('',#204182,#204183); +#204182 = CARTESIAN_POINT('',(107.063168,-77.643916,1.585)); +#204183 = VECTOR('',#204184,1.); +#204184 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204185 = ORIENTED_EDGE('',*,*,#204186,.T.); +#204186 = EDGE_CURVE('',#204179,#204128,#204187,.T.); +#204187 = LINE('',#204188,#204189); +#204188 = CARTESIAN_POINT('',(107.031889,-77.581359,1.585)); +#204189 = VECTOR('',#204190,1.); +#204190 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#204191 = FACE_BOUND('',#204192,.F.); +#204192 = EDGE_LOOP('',(#204193,#204204,#204212,#204220,#204228,#204236, + #204244,#204252)); +#204193 = ORIENTED_EDGE('',*,*,#204194,.T.); +#204194 = EDGE_CURVE('',#204195,#204197,#204199,.T.); +#204195 = VERTEX_POINT('',#204196); +#204196 = CARTESIAN_POINT('',(107.475381,-77.510564,1.585)); +#204197 = VERTEX_POINT('',#204198); +#204198 = CARTESIAN_POINT('',(107.252384,-77.510563,1.585)); +#204199 = CIRCLE('',#204200,0.182756450193); +#204200 = AXIS2_PLACEMENT_3D('',#204201,#204202,#204203); +#204201 = CARTESIAN_POINT('',(107.36388185064,-77.6553668307,1.585)); +#204202 = DIRECTION('',(0.,0.,1.)); +#204203 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#204204 = ORIENTED_EDGE('',*,*,#204205,.T.); +#204205 = EDGE_CURVE('',#204197,#204206,#204208,.T.); +#204206 = VERTEX_POINT('',#204207); +#204207 = CARTESIAN_POINT('',(107.227837,-77.53511,1.585)); +#204208 = LINE('',#204209,#204210); +#204209 = CARTESIAN_POINT('',(107.252384,-77.510563,1.585)); +#204210 = VECTOR('',#204211,1.); +#204211 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#204212 = ORIENTED_EDGE('',*,*,#204213,.T.); +#204213 = EDGE_CURVE('',#204206,#204214,#204216,.T.); +#204214 = VERTEX_POINT('',#204215); +#204215 = CARTESIAN_POINT('',(107.193168,-77.639118,1.585)); +#204216 = LINE('',#204217,#204218); +#204217 = CARTESIAN_POINT('',(107.227837,-77.53511,1.585)); +#204218 = VECTOR('',#204219,1.); +#204219 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#204220 = ORIENTED_EDGE('',*,*,#204221,.T.); +#204221 = EDGE_CURVE('',#204214,#204222,#204224,.T.); +#204222 = VERTEX_POINT('',#204223); +#204223 = CARTESIAN_POINT('',(107.193168,-77.863571,1.585)); +#204224 = LINE('',#204225,#204226); +#204225 = CARTESIAN_POINT('',(107.193168,-77.639118,1.585)); +#204226 = VECTOR('',#204227,1.); +#204227 = DIRECTION('',(0.,-1.,0.)); +#204228 = ORIENTED_EDGE('',*,*,#204229,.T.); +#204229 = EDGE_CURVE('',#204222,#204230,#204232,.T.); +#204230 = VERTEX_POINT('',#204231); +#204231 = CARTESIAN_POINT('',(107.534597,-77.863571,1.585)); +#204232 = LINE('',#204233,#204234); +#204233 = CARTESIAN_POINT('',(107.193168,-77.863571,1.585)); +#204234 = VECTOR('',#204235,1.); +#204235 = DIRECTION('',(1.,0.,0.)); +#204236 = ORIENTED_EDGE('',*,*,#204237,.T.); +#204237 = EDGE_CURVE('',#204230,#204238,#204240,.T.); +#204238 = VERTEX_POINT('',#204239); +#204239 = CARTESIAN_POINT('',(107.534597,-77.601058,1.585)); +#204240 = LINE('',#204241,#204242); +#204241 = CARTESIAN_POINT('',(107.534597,-77.863571,1.585)); +#204242 = VECTOR('',#204243,1.); +#204243 = DIRECTION('',(0.,1.,0.)); +#204244 = ORIENTED_EDGE('',*,*,#204245,.T.); +#204245 = EDGE_CURVE('',#204238,#204246,#204248,.T.); +#204246 = VERTEX_POINT('',#204247); +#204247 = CARTESIAN_POINT('',(107.503318,-77.538501,1.585)); +#204248 = LINE('',#204249,#204250); +#204249 = CARTESIAN_POINT('',(107.534597,-77.601058,1.585)); +#204250 = VECTOR('',#204251,1.); +#204251 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204252 = ORIENTED_EDGE('',*,*,#204253,.T.); +#204253 = EDGE_CURVE('',#204246,#204195,#204254,.T.); +#204254 = LINE('',#204255,#204256); +#204255 = CARTESIAN_POINT('',(107.503318,-77.538501,1.585)); +#204256 = VECTOR('',#204257,1.); +#204257 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204258 = PLANE('',#204259); +#204259 = AXIS2_PLACEMENT_3D('',#204260,#204261,#204262); +#204260 = CARTESIAN_POINT('',(0.,0.,1.585)); +#204261 = DIRECTION('',(0.,0.,1.)); +#204262 = DIRECTION('',(1.,0.,-0.)); +#204263 = SHELL_BASED_SURFACE_MODEL('',(#204264)); +#204264 = OPEN_SHELL('',(#204265)); +#204265 = ADVANCED_FACE('',(#204266,#204392,#204459),#204526,.T.); +#204266 = FACE_BOUND('',#204267,.F.); +#204267 = EDGE_LOOP('',(#204268,#204279,#204287,#204295,#204303,#204311, + #204320,#204328,#204337,#204345,#204354,#204362,#204370,#204378, + #204386)); +#204268 = ORIENTED_EDGE('',*,*,#204269,.T.); +#204269 = EDGE_CURVE('',#204270,#204272,#204274,.T.); +#204270 = VERTEX_POINT('',#204271); +#204271 = CARTESIAN_POINT('',(109.724813,-77.399004,1.585)); +#204272 = VERTEX_POINT('',#204273); +#204273 = CARTESIAN_POINT('',(109.997237,-77.356147,1.585)); +#204274 = CIRCLE('',#204275,0.328851911788); +#204275 = AXIS2_PLACEMENT_3D('',#204276,#204277,#204278); +#204276 = CARTESIAN_POINT('',(109.90742108589,-77.67249598681,1.585)); +#204277 = DIRECTION('',(0.,0.,-1.)); +#204278 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204279 = ORIENTED_EDGE('',*,*,#204280,.T.); +#204280 = EDGE_CURVE('',#204272,#204281,#204283,.T.); +#204281 = VERTEX_POINT('',#204282); +#204282 = CARTESIAN_POINT('',(110.099843,-77.41118,1.585)); +#204283 = LINE('',#204284,#204285); +#204284 = CARTESIAN_POINT('',(109.997237,-77.356147,1.585)); +#204285 = VECTOR('',#204286,1.); +#204286 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204287 = ORIENTED_EDGE('',*,*,#204288,.T.); +#204288 = EDGE_CURVE('',#204281,#204289,#204291,.T.); +#204289 = VERTEX_POINT('',#204290); +#204290 = CARTESIAN_POINT('',(110.154878,-77.47093,1.585)); +#204291 = LINE('',#204292,#204293); +#204292 = CARTESIAN_POINT('',(110.099843,-77.41118,1.585)); +#204293 = VECTOR('',#204294,1.); +#204294 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204295 = ORIENTED_EDGE('',*,*,#204296,.T.); +#204296 = EDGE_CURVE('',#204289,#204297,#204299,.T.); +#204297 = VERTEX_POINT('',#204298); +#204298 = CARTESIAN_POINT('',(110.201681,-77.571057,1.585)); +#204299 = LINE('',#204300,#204301); +#204300 = CARTESIAN_POINT('',(110.154878,-77.47093,1.585)); +#204301 = VECTOR('',#204302,1.); +#204302 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204303 = ORIENTED_EDGE('',*,*,#204304,.T.); +#204304 = EDGE_CURVE('',#204297,#204305,#204307,.T.); +#204305 = VERTEX_POINT('',#204306); +#204306 = CARTESIAN_POINT('',(110.204597,-77.928571,1.585)); +#204307 = LINE('',#204308,#204309); +#204308 = CARTESIAN_POINT('',(110.201681,-77.571057,1.585)); +#204309 = VECTOR('',#204310,1.); +#204310 = DIRECTION('',(8.15605265947E-03,-0.999966738849,0.)); +#204311 = ORIENTED_EDGE('',*,*,#204312,.T.); +#204312 = EDGE_CURVE('',#204305,#204313,#204315,.T.); +#204313 = VERTEX_POINT('',#204314); +#204314 = CARTESIAN_POINT('',(110.139597,-77.993571,1.585)); +#204315 = CIRCLE('',#204316,6.500103935393E-02); +#204316 = AXIS2_PLACEMENT_3D('',#204317,#204318,#204319); +#204317 = CARTESIAN_POINT('',(110.13959596065,-77.92856996065,1.585)); +#204318 = DIRECTION('',(0.,0.,-1.)); +#204319 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#204320 = ORIENTED_EDGE('',*,*,#204321,.T.); +#204321 = EDGE_CURVE('',#204313,#204322,#204324,.T.); +#204322 = VERTEX_POINT('',#204323); +#204323 = CARTESIAN_POINT('',(109.239597,-77.993571,1.585)); +#204324 = LINE('',#204325,#204326); +#204325 = CARTESIAN_POINT('',(110.139597,-77.993571,1.585)); +#204326 = VECTOR('',#204327,1.); +#204327 = DIRECTION('',(-1.,0.,0.)); +#204328 = ORIENTED_EDGE('',*,*,#204329,.T.); +#204329 = EDGE_CURVE('',#204322,#204330,#204332,.T.); +#204330 = VERTEX_POINT('',#204331); +#204331 = CARTESIAN_POINT('',(109.174597,-77.928571,1.585)); +#204332 = CIRCLE('',#204333,6.500103935389E-02); +#204333 = AXIS2_PLACEMENT_3D('',#204334,#204335,#204336); +#204334 = CARTESIAN_POINT('',(109.23959803934,-77.92856996065,1.585)); +#204335 = DIRECTION('',(0.,0.,-1.)); +#204336 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#204337 = ORIENTED_EDGE('',*,*,#204338,.T.); +#204338 = EDGE_CURVE('',#204330,#204339,#204341,.T.); +#204339 = VERTEX_POINT('',#204340); +#204340 = CARTESIAN_POINT('',(109.177512,-77.613914,1.585)); +#204341 = LINE('',#204342,#204343); +#204342 = CARTESIAN_POINT('',(109.174597,-77.928571,1.585)); +#204343 = VECTOR('',#204344,1.); +#204344 = DIRECTION('',(9.263658273644E-03,0.999957091397,0.)); +#204345 = ORIENTED_EDGE('',*,*,#204346,.T.); +#204346 = EDGE_CURVE('',#204339,#204347,#204349,.T.); +#204347 = VERTEX_POINT('',#204348); +#204348 = CARTESIAN_POINT('',(109.396368,-77.395057,1.585)); +#204349 = CIRCLE('',#204350,0.308109459502); +#204350 = AXIS2_PLACEMENT_3D('',#204351,#204352,#204353); +#204351 = CARTESIAN_POINT('',(109.47533145359,-77.69287609279,1.585)); +#204352 = DIRECTION('',(0.,0.,-1.)); +#204353 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204354 = ORIENTED_EDGE('',*,*,#204355,.T.); +#204355 = EDGE_CURVE('',#204347,#204356,#204358,.T.); +#204356 = VERTEX_POINT('',#204357); +#204357 = CARTESIAN_POINT('',(109.511396,-77.395057,1.585)); +#204358 = LINE('',#204359,#204360); +#204359 = CARTESIAN_POINT('',(109.396368,-77.395057,1.585)); +#204360 = VECTOR('',#204361,1.); +#204361 = DIRECTION('',(1.,0.,0.)); +#204362 = ORIENTED_EDGE('',*,*,#204363,.T.); +#204363 = EDGE_CURVE('',#204356,#204364,#204366,.T.); +#204364 = VERTEX_POINT('',#204365); +#204365 = CARTESIAN_POINT('',(109.619761,-77.448254,1.585)); +#204366 = LINE('',#204367,#204368); +#204367 = CARTESIAN_POINT('',(109.511396,-77.395057,1.585)); +#204368 = VECTOR('',#204369,1.); +#204369 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204370 = ORIENTED_EDGE('',*,*,#204371,.T.); +#204371 = EDGE_CURVE('',#204364,#204372,#204374,.T.); +#204372 = VERTEX_POINT('',#204373); +#204373 = CARTESIAN_POINT('',(109.650973,-77.475124,1.585)); +#204374 = LINE('',#204375,#204376); +#204375 = CARTESIAN_POINT('',(109.619761,-77.448254,1.585)); +#204376 = VECTOR('',#204377,1.); +#204377 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204378 = ORIENTED_EDGE('',*,*,#204379,.T.); +#204379 = EDGE_CURVE('',#204372,#204380,#204382,.T.); +#204380 = VERTEX_POINT('',#204381); +#204381 = CARTESIAN_POINT('',(109.665063,-77.454037,1.585)); +#204382 = LINE('',#204383,#204384); +#204383 = CARTESIAN_POINT('',(109.650973,-77.475124,1.585)); +#204384 = VECTOR('',#204385,1.); +#204385 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204386 = ORIENTED_EDGE('',*,*,#204387,.T.); +#204387 = EDGE_CURVE('',#204380,#204270,#204388,.T.); +#204388 = LINE('',#204389,#204390); +#204389 = CARTESIAN_POINT('',(109.665063,-77.454037,1.585)); +#204390 = VECTOR('',#204391,1.); +#204391 = DIRECTION('',(0.735544459429,0.677476455829,0.)); +#204392 = FACE_BOUND('',#204393,.F.); +#204393 = EDGE_LOOP('',(#204394,#204405,#204413,#204421,#204429,#204437, + #204445,#204453)); +#204394 = ORIENTED_EDGE('',*,*,#204395,.T.); +#204395 = EDGE_CURVE('',#204396,#204398,#204400,.T.); +#204396 = VERTEX_POINT('',#204397); +#204397 = CARTESIAN_POINT('',(109.543952,-77.55342,1.585)); +#204398 = VERTEX_POINT('',#204399); +#204399 = CARTESIAN_POINT('',(109.363814,-77.55342,1.585)); +#204400 = CIRCLE('',#204401,0.136032349131); +#204401 = AXIS2_PLACEMENT_3D('',#204402,#204403,#204404); +#204402 = CARTESIAN_POINT('',(109.453883,-77.655363,1.585)); +#204403 = DIRECTION('',(0.,0.,1.)); +#204404 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204405 = ORIENTED_EDGE('',*,*,#204406,.T.); +#204406 = EDGE_CURVE('',#204398,#204407,#204409,.T.); +#204407 = VERTEX_POINT('',#204408); +#204408 = CARTESIAN_POINT('',(109.335876,-77.581358,1.585)); +#204409 = LINE('',#204410,#204411); +#204410 = CARTESIAN_POINT('',(109.363814,-77.55342,1.585)); +#204411 = VECTOR('',#204412,1.); +#204412 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#204413 = ORIENTED_EDGE('',*,*,#204414,.T.); +#204414 = EDGE_CURVE('',#204407,#204415,#204417,.T.); +#204415 = VERTEX_POINT('',#204416); +#204416 = CARTESIAN_POINT('',(109.304597,-77.643916,1.585)); +#204417 = LINE('',#204418,#204419); +#204418 = CARTESIAN_POINT('',(109.335876,-77.581358,1.585)); +#204419 = VECTOR('',#204420,1.); +#204420 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204421 = ORIENTED_EDGE('',*,*,#204422,.T.); +#204422 = EDGE_CURVE('',#204415,#204423,#204425,.T.); +#204423 = VERTEX_POINT('',#204424); +#204424 = CARTESIAN_POINT('',(109.304597,-77.863571,1.585)); +#204425 = LINE('',#204426,#204427); +#204426 = CARTESIAN_POINT('',(109.304597,-77.643916,1.585)); +#204427 = VECTOR('',#204428,1.); +#204428 = DIRECTION('',(0.,-1.,0.)); +#204429 = ORIENTED_EDGE('',*,*,#204430,.T.); +#204430 = EDGE_CURVE('',#204423,#204431,#204433,.T.); +#204431 = VERTEX_POINT('',#204432); +#204432 = CARTESIAN_POINT('',(109.603168,-77.863571,1.585)); +#204433 = LINE('',#204434,#204435); +#204434 = CARTESIAN_POINT('',(109.304597,-77.863571,1.585)); +#204435 = VECTOR('',#204436,1.); +#204436 = DIRECTION('',(1.,0.,0.)); +#204437 = ORIENTED_EDGE('',*,*,#204438,.T.); +#204438 = EDGE_CURVE('',#204431,#204439,#204441,.T.); +#204439 = VERTEX_POINT('',#204440); +#204440 = CARTESIAN_POINT('',(109.603168,-77.643916,1.585)); +#204441 = LINE('',#204442,#204443); +#204442 = CARTESIAN_POINT('',(109.603168,-77.863571,1.585)); +#204443 = VECTOR('',#204444,1.); +#204444 = DIRECTION('',(0.,1.,0.)); +#204445 = ORIENTED_EDGE('',*,*,#204446,.T.); +#204446 = EDGE_CURVE('',#204439,#204447,#204449,.T.); +#204447 = VERTEX_POINT('',#204448); +#204448 = CARTESIAN_POINT('',(109.571889,-77.581359,1.585)); +#204449 = LINE('',#204450,#204451); +#204450 = CARTESIAN_POINT('',(109.603168,-77.643916,1.585)); +#204451 = VECTOR('',#204452,1.); +#204452 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204453 = ORIENTED_EDGE('',*,*,#204454,.T.); +#204454 = EDGE_CURVE('',#204447,#204396,#204455,.T.); +#204455 = LINE('',#204456,#204457); +#204456 = CARTESIAN_POINT('',(109.571889,-77.581359,1.585)); +#204457 = VECTOR('',#204458,1.); +#204458 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#204459 = FACE_BOUND('',#204460,.F.); +#204460 = EDGE_LOOP('',(#204461,#204472,#204480,#204488,#204496,#204504, + #204512,#204520)); +#204461 = ORIENTED_EDGE('',*,*,#204462,.T.); +#204462 = EDGE_CURVE('',#204463,#204465,#204467,.T.); +#204463 = VERTEX_POINT('',#204464); +#204464 = CARTESIAN_POINT('',(110.015381,-77.510564,1.585)); +#204465 = VERTEX_POINT('',#204466); +#204466 = CARTESIAN_POINT('',(109.792384,-77.510563,1.585)); +#204467 = CIRCLE('',#204468,0.182756450193); +#204468 = AXIS2_PLACEMENT_3D('',#204469,#204470,#204471); +#204469 = CARTESIAN_POINT('',(109.90388185064,-77.6553668307,1.585)); +#204470 = DIRECTION('',(0.,0.,1.)); +#204471 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#204472 = ORIENTED_EDGE('',*,*,#204473,.T.); +#204473 = EDGE_CURVE('',#204465,#204474,#204476,.T.); +#204474 = VERTEX_POINT('',#204475); +#204475 = CARTESIAN_POINT('',(109.767837,-77.53511,1.585)); +#204476 = LINE('',#204477,#204478); +#204477 = CARTESIAN_POINT('',(109.792384,-77.510563,1.585)); +#204478 = VECTOR('',#204479,1.); +#204479 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204480 = ORIENTED_EDGE('',*,*,#204481,.T.); +#204481 = EDGE_CURVE('',#204474,#204482,#204484,.T.); +#204482 = VERTEX_POINT('',#204483); +#204483 = CARTESIAN_POINT('',(109.733168,-77.639118,1.585)); +#204484 = LINE('',#204485,#204486); +#204485 = CARTESIAN_POINT('',(109.767837,-77.53511,1.585)); +#204486 = VECTOR('',#204487,1.); +#204487 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#204488 = ORIENTED_EDGE('',*,*,#204489,.T.); +#204489 = EDGE_CURVE('',#204482,#204490,#204492,.T.); +#204490 = VERTEX_POINT('',#204491); +#204491 = CARTESIAN_POINT('',(109.733168,-77.863571,1.585)); +#204492 = LINE('',#204493,#204494); +#204493 = CARTESIAN_POINT('',(109.733168,-77.639118,1.585)); +#204494 = VECTOR('',#204495,1.); +#204495 = DIRECTION('',(0.,-1.,0.)); +#204496 = ORIENTED_EDGE('',*,*,#204497,.T.); +#204497 = EDGE_CURVE('',#204490,#204498,#204500,.T.); +#204498 = VERTEX_POINT('',#204499); +#204499 = CARTESIAN_POINT('',(110.074597,-77.863571,1.585)); +#204500 = LINE('',#204501,#204502); +#204501 = CARTESIAN_POINT('',(109.733168,-77.863571,1.585)); +#204502 = VECTOR('',#204503,1.); +#204503 = DIRECTION('',(1.,0.,0.)); +#204504 = ORIENTED_EDGE('',*,*,#204505,.T.); +#204505 = EDGE_CURVE('',#204498,#204506,#204508,.T.); +#204506 = VERTEX_POINT('',#204507); +#204507 = CARTESIAN_POINT('',(110.074597,-77.601058,1.585)); +#204508 = LINE('',#204509,#204510); +#204509 = CARTESIAN_POINT('',(110.074597,-77.863571,1.585)); +#204510 = VECTOR('',#204511,1.); +#204511 = DIRECTION('',(0.,1.,0.)); +#204512 = ORIENTED_EDGE('',*,*,#204513,.T.); +#204513 = EDGE_CURVE('',#204506,#204514,#204516,.T.); +#204514 = VERTEX_POINT('',#204515); +#204515 = CARTESIAN_POINT('',(110.043318,-77.538501,1.585)); +#204516 = LINE('',#204517,#204518); +#204517 = CARTESIAN_POINT('',(110.074597,-77.601058,1.585)); +#204518 = VECTOR('',#204519,1.); +#204519 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204520 = ORIENTED_EDGE('',*,*,#204521,.T.); +#204521 = EDGE_CURVE('',#204514,#204463,#204522,.T.); +#204522 = LINE('',#204523,#204524); +#204523 = CARTESIAN_POINT('',(110.043318,-77.538501,1.585)); +#204524 = VECTOR('',#204525,1.); +#204525 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204526 = PLANE('',#204527); +#204527 = AXIS2_PLACEMENT_3D('',#204528,#204529,#204530); +#204528 = CARTESIAN_POINT('',(0.,0.,1.585)); +#204529 = DIRECTION('',(0.,0.,1.)); +#204530 = DIRECTION('',(1.,0.,-0.)); +#204531 = SHELL_BASED_SURFACE_MODEL('',(#204532)); +#204532 = OPEN_SHELL('',(#204533)); +#204533 = ADVANCED_FACE('',(#204534,#204660,#204727),#204794,.T.); +#204534 = FACE_BOUND('',#204535,.F.); +#204535 = EDGE_LOOP('',(#204536,#204547,#204555,#204563,#204571,#204579, + #204588,#204596,#204605,#204613,#204622,#204630,#204638,#204646, + #204654)); +#204536 = ORIENTED_EDGE('',*,*,#204537,.T.); +#204537 = EDGE_CURVE('',#204538,#204540,#204542,.T.); +#204538 = VERTEX_POINT('',#204539); +#204539 = CARTESIAN_POINT('',(112.264813,-77.399004,1.585)); +#204540 = VERTEX_POINT('',#204541); +#204541 = CARTESIAN_POINT('',(112.537237,-77.356147,1.585)); +#204542 = CIRCLE('',#204543,0.328851911789); +#204543 = AXIS2_PLACEMENT_3D('',#204544,#204545,#204546); +#204544 = CARTESIAN_POINT('',(112.44742108589,-77.67249598681,1.585)); +#204545 = DIRECTION('',(0.,0.,-1.)); +#204546 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204547 = ORIENTED_EDGE('',*,*,#204548,.T.); +#204548 = EDGE_CURVE('',#204540,#204549,#204551,.T.); +#204549 = VERTEX_POINT('',#204550); +#204550 = CARTESIAN_POINT('',(112.639843,-77.41118,1.585)); +#204551 = LINE('',#204552,#204553); +#204552 = CARTESIAN_POINT('',(112.537237,-77.356147,1.585)); +#204553 = VECTOR('',#204554,1.); +#204554 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204555 = ORIENTED_EDGE('',*,*,#204556,.T.); +#204556 = EDGE_CURVE('',#204549,#204557,#204559,.T.); +#204557 = VERTEX_POINT('',#204558); +#204558 = CARTESIAN_POINT('',(112.694878,-77.47093,1.585)); +#204559 = LINE('',#204560,#204561); +#204560 = CARTESIAN_POINT('',(112.639843,-77.41118,1.585)); +#204561 = VECTOR('',#204562,1.); +#204562 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204563 = ORIENTED_EDGE('',*,*,#204564,.T.); +#204564 = EDGE_CURVE('',#204557,#204565,#204567,.T.); +#204565 = VERTEX_POINT('',#204566); +#204566 = CARTESIAN_POINT('',(112.741681,-77.571057,1.585)); +#204567 = LINE('',#204568,#204569); +#204568 = CARTESIAN_POINT('',(112.694878,-77.47093,1.585)); +#204569 = VECTOR('',#204570,1.); +#204570 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204571 = ORIENTED_EDGE('',*,*,#204572,.T.); +#204572 = EDGE_CURVE('',#204565,#204573,#204575,.T.); +#204573 = VERTEX_POINT('',#204574); +#204574 = CARTESIAN_POINT('',(112.744597,-77.928571,1.585)); +#204575 = LINE('',#204576,#204577); +#204576 = CARTESIAN_POINT('',(112.741681,-77.571057,1.585)); +#204577 = VECTOR('',#204578,1.); +#204578 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#204579 = ORIENTED_EDGE('',*,*,#204580,.T.); +#204580 = EDGE_CURVE('',#204573,#204581,#204583,.T.); +#204581 = VERTEX_POINT('',#204582); +#204582 = CARTESIAN_POINT('',(112.679597,-77.993571,1.585)); +#204583 = CIRCLE('',#204584,6.500103935389E-02); +#204584 = AXIS2_PLACEMENT_3D('',#204585,#204586,#204587); +#204585 = CARTESIAN_POINT('',(112.67959596065,-77.92856996065,1.585)); +#204586 = DIRECTION('',(0.,0.,-1.)); +#204587 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#204588 = ORIENTED_EDGE('',*,*,#204589,.T.); +#204589 = EDGE_CURVE('',#204581,#204590,#204592,.T.); +#204590 = VERTEX_POINT('',#204591); +#204591 = CARTESIAN_POINT('',(111.779597,-77.993571,1.585)); +#204592 = LINE('',#204593,#204594); +#204593 = CARTESIAN_POINT('',(112.679597,-77.993571,1.585)); +#204594 = VECTOR('',#204595,1.); +#204595 = DIRECTION('',(-1.,0.,0.)); +#204596 = ORIENTED_EDGE('',*,*,#204597,.T.); +#204597 = EDGE_CURVE('',#204590,#204598,#204600,.T.); +#204598 = VERTEX_POINT('',#204599); +#204599 = CARTESIAN_POINT('',(111.714597,-77.928571,1.585)); +#204600 = CIRCLE('',#204601,6.500103935389E-02); +#204601 = AXIS2_PLACEMENT_3D('',#204602,#204603,#204604); +#204602 = CARTESIAN_POINT('',(111.77959803934,-77.92856996065,1.585)); +#204603 = DIRECTION('',(0.,0.,-1.)); +#204604 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#204605 = ORIENTED_EDGE('',*,*,#204606,.T.); +#204606 = EDGE_CURVE('',#204598,#204607,#204609,.T.); +#204607 = VERTEX_POINT('',#204608); +#204608 = CARTESIAN_POINT('',(111.717512,-77.613914,1.585)); +#204609 = LINE('',#204610,#204611); +#204610 = CARTESIAN_POINT('',(111.714597,-77.928571,1.585)); +#204611 = VECTOR('',#204612,1.); +#204612 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#204613 = ORIENTED_EDGE('',*,*,#204614,.T.); +#204614 = EDGE_CURVE('',#204607,#204615,#204617,.T.); +#204615 = VERTEX_POINT('',#204616); +#204616 = CARTESIAN_POINT('',(111.936368,-77.395057,1.585)); +#204617 = CIRCLE('',#204618,0.308109459502); +#204618 = AXIS2_PLACEMENT_3D('',#204619,#204620,#204621); +#204619 = CARTESIAN_POINT('',(112.01533145359,-77.69287609279,1.585)); +#204620 = DIRECTION('',(0.,0.,-1.)); +#204621 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204622 = ORIENTED_EDGE('',*,*,#204623,.T.); +#204623 = EDGE_CURVE('',#204615,#204624,#204626,.T.); +#204624 = VERTEX_POINT('',#204625); +#204625 = CARTESIAN_POINT('',(112.051396,-77.395057,1.585)); +#204626 = LINE('',#204627,#204628); +#204627 = CARTESIAN_POINT('',(111.936368,-77.395057,1.585)); +#204628 = VECTOR('',#204629,1.); +#204629 = DIRECTION('',(1.,0.,0.)); +#204630 = ORIENTED_EDGE('',*,*,#204631,.T.); +#204631 = EDGE_CURVE('',#204624,#204632,#204634,.T.); +#204632 = VERTEX_POINT('',#204633); +#204633 = CARTESIAN_POINT('',(112.159761,-77.448254,1.585)); +#204634 = LINE('',#204635,#204636); +#204635 = CARTESIAN_POINT('',(112.051396,-77.395057,1.585)); +#204636 = VECTOR('',#204637,1.); +#204637 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204638 = ORIENTED_EDGE('',*,*,#204639,.T.); +#204639 = EDGE_CURVE('',#204632,#204640,#204642,.T.); +#204640 = VERTEX_POINT('',#204641); +#204641 = CARTESIAN_POINT('',(112.190973,-77.475124,1.585)); +#204642 = LINE('',#204643,#204644); +#204643 = CARTESIAN_POINT('',(112.159761,-77.448254,1.585)); +#204644 = VECTOR('',#204645,1.); +#204645 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204646 = ORIENTED_EDGE('',*,*,#204647,.T.); +#204647 = EDGE_CURVE('',#204640,#204648,#204650,.T.); +#204648 = VERTEX_POINT('',#204649); +#204649 = CARTESIAN_POINT('',(112.205063,-77.454037,1.585)); +#204650 = LINE('',#204651,#204652); +#204651 = CARTESIAN_POINT('',(112.190973,-77.475124,1.585)); +#204652 = VECTOR('',#204653,1.); +#204653 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204654 = ORIENTED_EDGE('',*,*,#204655,.T.); +#204655 = EDGE_CURVE('',#204648,#204538,#204656,.T.); +#204656 = LINE('',#204657,#204658); +#204657 = CARTESIAN_POINT('',(112.205063,-77.454037,1.585)); +#204658 = VECTOR('',#204659,1.); +#204659 = DIRECTION('',(0.73554445943,0.677476455829,0.)); +#204660 = FACE_BOUND('',#204661,.F.); +#204661 = EDGE_LOOP('',(#204662,#204673,#204681,#204689,#204697,#204705, + #204713,#204721)); +#204662 = ORIENTED_EDGE('',*,*,#204663,.T.); +#204663 = EDGE_CURVE('',#204664,#204666,#204668,.T.); +#204664 = VERTEX_POINT('',#204665); +#204665 = CARTESIAN_POINT('',(112.083952,-77.55342,1.585)); +#204666 = VERTEX_POINT('',#204667); +#204667 = CARTESIAN_POINT('',(111.903814,-77.55342,1.585)); +#204668 = CIRCLE('',#204669,0.136032349131); +#204669 = AXIS2_PLACEMENT_3D('',#204670,#204671,#204672); +#204670 = CARTESIAN_POINT('',(111.993883,-77.655363,1.585)); +#204671 = DIRECTION('',(0.,0.,1.)); +#204672 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204673 = ORIENTED_EDGE('',*,*,#204674,.T.); +#204674 = EDGE_CURVE('',#204666,#204675,#204677,.T.); +#204675 = VERTEX_POINT('',#204676); +#204676 = CARTESIAN_POINT('',(111.875876,-77.581358,1.585)); +#204677 = LINE('',#204678,#204679); +#204678 = CARTESIAN_POINT('',(111.903814,-77.55342,1.585)); +#204679 = VECTOR('',#204680,1.); +#204680 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204681 = ORIENTED_EDGE('',*,*,#204682,.T.); +#204682 = EDGE_CURVE('',#204675,#204683,#204685,.T.); +#204683 = VERTEX_POINT('',#204684); +#204684 = CARTESIAN_POINT('',(111.844597,-77.643916,1.585)); +#204685 = LINE('',#204686,#204687); +#204686 = CARTESIAN_POINT('',(111.875876,-77.581358,1.585)); +#204687 = VECTOR('',#204688,1.); +#204688 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204689 = ORIENTED_EDGE('',*,*,#204690,.T.); +#204690 = EDGE_CURVE('',#204683,#204691,#204693,.T.); +#204691 = VERTEX_POINT('',#204692); +#204692 = CARTESIAN_POINT('',(111.844597,-77.863571,1.585)); +#204693 = LINE('',#204694,#204695); +#204694 = CARTESIAN_POINT('',(111.844597,-77.643916,1.585)); +#204695 = VECTOR('',#204696,1.); +#204696 = DIRECTION('',(0.,-1.,0.)); +#204697 = ORIENTED_EDGE('',*,*,#204698,.T.); +#204698 = EDGE_CURVE('',#204691,#204699,#204701,.T.); +#204699 = VERTEX_POINT('',#204700); +#204700 = CARTESIAN_POINT('',(112.143168,-77.863571,1.585)); +#204701 = LINE('',#204702,#204703); +#204702 = CARTESIAN_POINT('',(111.844597,-77.863571,1.585)); +#204703 = VECTOR('',#204704,1.); +#204704 = DIRECTION('',(1.,0.,0.)); +#204705 = ORIENTED_EDGE('',*,*,#204706,.T.); +#204706 = EDGE_CURVE('',#204699,#204707,#204709,.T.); +#204707 = VERTEX_POINT('',#204708); +#204708 = CARTESIAN_POINT('',(112.143168,-77.643916,1.585)); +#204709 = LINE('',#204710,#204711); +#204710 = CARTESIAN_POINT('',(112.143168,-77.863571,1.585)); +#204711 = VECTOR('',#204712,1.); +#204712 = DIRECTION('',(0.,1.,0.)); +#204713 = ORIENTED_EDGE('',*,*,#204714,.T.); +#204714 = EDGE_CURVE('',#204707,#204715,#204717,.T.); +#204715 = VERTEX_POINT('',#204716); +#204716 = CARTESIAN_POINT('',(112.111889,-77.581359,1.585)); +#204717 = LINE('',#204718,#204719); +#204718 = CARTESIAN_POINT('',(112.143168,-77.643916,1.585)); +#204719 = VECTOR('',#204720,1.); +#204720 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204721 = ORIENTED_EDGE('',*,*,#204722,.T.); +#204722 = EDGE_CURVE('',#204715,#204664,#204723,.T.); +#204723 = LINE('',#204724,#204725); +#204724 = CARTESIAN_POINT('',(112.111889,-77.581359,1.585)); +#204725 = VECTOR('',#204726,1.); +#204726 = DIRECTION('',(-0.707081470877,0.70713209059,0.)); +#204727 = FACE_BOUND('',#204728,.F.); +#204728 = EDGE_LOOP('',(#204729,#204740,#204748,#204756,#204764,#204772, + #204780,#204788)); +#204729 = ORIENTED_EDGE('',*,*,#204730,.T.); +#204730 = EDGE_CURVE('',#204731,#204733,#204735,.T.); +#204731 = VERTEX_POINT('',#204732); +#204732 = CARTESIAN_POINT('',(112.555381,-77.510564,1.585)); +#204733 = VERTEX_POINT('',#204734); +#204734 = CARTESIAN_POINT('',(112.332384,-77.510563,1.585)); +#204735 = CIRCLE('',#204736,0.182756450193); +#204736 = AXIS2_PLACEMENT_3D('',#204737,#204738,#204739); +#204737 = CARTESIAN_POINT('',(112.44388185064,-77.6553668307,1.585)); +#204738 = DIRECTION('',(0.,0.,1.)); +#204739 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#204740 = ORIENTED_EDGE('',*,*,#204741,.T.); +#204741 = EDGE_CURVE('',#204733,#204742,#204744,.T.); +#204742 = VERTEX_POINT('',#204743); +#204743 = CARTESIAN_POINT('',(112.307837,-77.53511,1.585)); +#204744 = LINE('',#204745,#204746); +#204745 = CARTESIAN_POINT('',(112.332384,-77.510563,1.585)); +#204746 = VECTOR('',#204747,1.); +#204747 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204748 = ORIENTED_EDGE('',*,*,#204749,.T.); +#204749 = EDGE_CURVE('',#204742,#204750,#204752,.T.); +#204750 = VERTEX_POINT('',#204751); +#204751 = CARTESIAN_POINT('',(112.273168,-77.639118,1.585)); +#204752 = LINE('',#204753,#204754); +#204753 = CARTESIAN_POINT('',(112.307837,-77.53511,1.585)); +#204754 = VECTOR('',#204755,1.); +#204755 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#204756 = ORIENTED_EDGE('',*,*,#204757,.T.); +#204757 = EDGE_CURVE('',#204750,#204758,#204760,.T.); +#204758 = VERTEX_POINT('',#204759); +#204759 = CARTESIAN_POINT('',(112.273168,-77.863571,1.585)); +#204760 = LINE('',#204761,#204762); +#204761 = CARTESIAN_POINT('',(112.273168,-77.639118,1.585)); +#204762 = VECTOR('',#204763,1.); +#204763 = DIRECTION('',(0.,-1.,0.)); +#204764 = ORIENTED_EDGE('',*,*,#204765,.T.); +#204765 = EDGE_CURVE('',#204758,#204766,#204768,.T.); +#204766 = VERTEX_POINT('',#204767); +#204767 = CARTESIAN_POINT('',(112.614597,-77.863571,1.585)); +#204768 = LINE('',#204769,#204770); +#204769 = CARTESIAN_POINT('',(112.273168,-77.863571,1.585)); +#204770 = VECTOR('',#204771,1.); +#204771 = DIRECTION('',(1.,0.,0.)); +#204772 = ORIENTED_EDGE('',*,*,#204773,.T.); +#204773 = EDGE_CURVE('',#204766,#204774,#204776,.T.); +#204774 = VERTEX_POINT('',#204775); +#204775 = CARTESIAN_POINT('',(112.614597,-77.601058,1.585)); +#204776 = LINE('',#204777,#204778); +#204777 = CARTESIAN_POINT('',(112.614597,-77.863571,1.585)); +#204778 = VECTOR('',#204779,1.); +#204779 = DIRECTION('',(0.,1.,0.)); +#204780 = ORIENTED_EDGE('',*,*,#204781,.T.); +#204781 = EDGE_CURVE('',#204774,#204782,#204784,.T.); +#204782 = VERTEX_POINT('',#204783); +#204783 = CARTESIAN_POINT('',(112.583318,-77.538501,1.585)); +#204784 = LINE('',#204785,#204786); +#204785 = CARTESIAN_POINT('',(112.614597,-77.601058,1.585)); +#204786 = VECTOR('',#204787,1.); +#204787 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204788 = ORIENTED_EDGE('',*,*,#204789,.T.); +#204789 = EDGE_CURVE('',#204782,#204731,#204790,.T.); +#204790 = LINE('',#204791,#204792); +#204791 = CARTESIAN_POINT('',(112.583318,-77.538501,1.585)); +#204792 = VECTOR('',#204793,1.); +#204793 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#204794 = PLANE('',#204795); +#204795 = AXIS2_PLACEMENT_3D('',#204796,#204797,#204798); +#204796 = CARTESIAN_POINT('',(0.,0.,1.585)); +#204797 = DIRECTION('',(0.,0.,1.)); +#204798 = DIRECTION('',(1.,0.,-0.)); +#204799 = SHELL_BASED_SURFACE_MODEL('',(#204800)); +#204800 = OPEN_SHELL('',(#204801)); +#204801 = ADVANCED_FACE('',(#204802,#204928,#204995),#205062,.T.); +#204802 = FACE_BOUND('',#204803,.F.); +#204803 = EDGE_LOOP('',(#204804,#204815,#204823,#204831,#204839,#204847, + #204856,#204864,#204873,#204881,#204890,#204898,#204906,#204914, + #204922)); +#204804 = ORIENTED_EDGE('',*,*,#204805,.T.); +#204805 = EDGE_CURVE('',#204806,#204808,#204810,.T.); +#204806 = VERTEX_POINT('',#204807); +#204807 = CARTESIAN_POINT('',(114.804813,-77.399004,1.585)); +#204808 = VERTEX_POINT('',#204809); +#204809 = CARTESIAN_POINT('',(115.077237,-77.356147,1.585)); +#204810 = CIRCLE('',#204811,0.328851911788); +#204811 = AXIS2_PLACEMENT_3D('',#204812,#204813,#204814); +#204812 = CARTESIAN_POINT('',(114.98742108589,-77.67249598681,1.585)); +#204813 = DIRECTION('',(0.,0.,-1.)); +#204814 = DIRECTION('',(-0.555289719621,0.831656976934,0.)); +#204815 = ORIENTED_EDGE('',*,*,#204816,.T.); +#204816 = EDGE_CURVE('',#204808,#204817,#204819,.T.); +#204817 = VERTEX_POINT('',#204818); +#204818 = CARTESIAN_POINT('',(115.179843,-77.41118,1.585)); +#204819 = LINE('',#204820,#204821); +#204820 = CARTESIAN_POINT('',(115.077237,-77.356147,1.585)); +#204821 = VECTOR('',#204822,1.); +#204822 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#204823 = ORIENTED_EDGE('',*,*,#204824,.T.); +#204824 = EDGE_CURVE('',#204817,#204825,#204827,.T.); +#204825 = VERTEX_POINT('',#204826); +#204826 = CARTESIAN_POINT('',(115.234878,-77.47093,1.585)); +#204827 = LINE('',#204828,#204829); +#204828 = CARTESIAN_POINT('',(115.179843,-77.41118,1.585)); +#204829 = VECTOR('',#204830,1.); +#204830 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#204831 = ORIENTED_EDGE('',*,*,#204832,.T.); +#204832 = EDGE_CURVE('',#204825,#204833,#204835,.T.); +#204833 = VERTEX_POINT('',#204834); +#204834 = CARTESIAN_POINT('',(115.281681,-77.571057,1.585)); +#204835 = LINE('',#204836,#204837); +#204836 = CARTESIAN_POINT('',(115.234878,-77.47093,1.585)); +#204837 = VECTOR('',#204838,1.); +#204838 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#204839 = ORIENTED_EDGE('',*,*,#204840,.T.); +#204840 = EDGE_CURVE('',#204833,#204841,#204843,.T.); +#204841 = VERTEX_POINT('',#204842); +#204842 = CARTESIAN_POINT('',(115.284597,-77.928571,1.585)); +#204843 = LINE('',#204844,#204845); +#204844 = CARTESIAN_POINT('',(115.281681,-77.571057,1.585)); +#204845 = VECTOR('',#204846,1.); +#204846 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#204847 = ORIENTED_EDGE('',*,*,#204848,.T.); +#204848 = EDGE_CURVE('',#204841,#204849,#204851,.T.); +#204849 = VERTEX_POINT('',#204850); +#204850 = CARTESIAN_POINT('',(115.219597,-77.993571,1.585)); +#204851 = CIRCLE('',#204852,6.500103935388E-02); +#204852 = AXIS2_PLACEMENT_3D('',#204853,#204854,#204855); +#204853 = CARTESIAN_POINT('',(115.21959596065,-77.92856996065,1.585)); +#204854 = DIRECTION('',(0.,0.,-1.)); +#204855 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#204856 = ORIENTED_EDGE('',*,*,#204857,.T.); +#204857 = EDGE_CURVE('',#204849,#204858,#204860,.T.); +#204858 = VERTEX_POINT('',#204859); +#204859 = CARTESIAN_POINT('',(114.319597,-77.993571,1.585)); +#204860 = LINE('',#204861,#204862); +#204861 = CARTESIAN_POINT('',(115.219597,-77.993571,1.585)); +#204862 = VECTOR('',#204863,1.); +#204863 = DIRECTION('',(-1.,0.,0.)); +#204864 = ORIENTED_EDGE('',*,*,#204865,.T.); +#204865 = EDGE_CURVE('',#204858,#204866,#204868,.T.); +#204866 = VERTEX_POINT('',#204867); +#204867 = CARTESIAN_POINT('',(114.254597,-77.928571,1.585)); +#204868 = CIRCLE('',#204869,6.50010393539E-02); +#204869 = AXIS2_PLACEMENT_3D('',#204870,#204871,#204872); +#204870 = CARTESIAN_POINT('',(114.31959803934,-77.92856996065,1.585)); +#204871 = DIRECTION('',(0.,0.,-1.)); +#204872 = DIRECTION('',(-1.598967649219E-05,-0.999999999872,-0.)); +#204873 = ORIENTED_EDGE('',*,*,#204874,.T.); +#204874 = EDGE_CURVE('',#204866,#204875,#204877,.T.); +#204875 = VERTEX_POINT('',#204876); +#204876 = CARTESIAN_POINT('',(114.257512,-77.613914,1.585)); +#204877 = LINE('',#204878,#204879); +#204878 = CARTESIAN_POINT('',(114.254597,-77.928571,1.585)); +#204879 = VECTOR('',#204880,1.); +#204880 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#204881 = ORIENTED_EDGE('',*,*,#204882,.T.); +#204882 = EDGE_CURVE('',#204875,#204883,#204885,.T.); +#204883 = VERTEX_POINT('',#204884); +#204884 = CARTESIAN_POINT('',(114.476368,-77.395057,1.585)); +#204885 = CIRCLE('',#204886,0.308109459502); +#204886 = AXIS2_PLACEMENT_3D('',#204887,#204888,#204889); +#204887 = CARTESIAN_POINT('',(114.55533145359,-77.69287609279,1.585)); +#204888 = DIRECTION('',(0.,0.,-1.)); +#204889 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#204890 = ORIENTED_EDGE('',*,*,#204891,.T.); +#204891 = EDGE_CURVE('',#204883,#204892,#204894,.T.); +#204892 = VERTEX_POINT('',#204893); +#204893 = CARTESIAN_POINT('',(114.591396,-77.395057,1.585)); +#204894 = LINE('',#204895,#204896); +#204895 = CARTESIAN_POINT('',(114.476368,-77.395057,1.585)); +#204896 = VECTOR('',#204897,1.); +#204897 = DIRECTION('',(1.,0.,0.)); +#204898 = ORIENTED_EDGE('',*,*,#204899,.T.); +#204899 = EDGE_CURVE('',#204892,#204900,#204902,.T.); +#204900 = VERTEX_POINT('',#204901); +#204901 = CARTESIAN_POINT('',(114.699761,-77.448254,1.585)); +#204902 = LINE('',#204903,#204904); +#204903 = CARTESIAN_POINT('',(114.591396,-77.395057,1.585)); +#204904 = VECTOR('',#204905,1.); +#204905 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#204906 = ORIENTED_EDGE('',*,*,#204907,.T.); +#204907 = EDGE_CURVE('',#204900,#204908,#204910,.T.); +#204908 = VERTEX_POINT('',#204909); +#204909 = CARTESIAN_POINT('',(114.730973,-77.475124,1.585)); +#204910 = LINE('',#204911,#204912); +#204911 = CARTESIAN_POINT('',(114.699761,-77.448254,1.585)); +#204912 = VECTOR('',#204913,1.); +#204913 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#204914 = ORIENTED_EDGE('',*,*,#204915,.T.); +#204915 = EDGE_CURVE('',#204908,#204916,#204918,.T.); +#204916 = VERTEX_POINT('',#204917); +#204917 = CARTESIAN_POINT('',(114.745063,-77.454037,1.585)); +#204918 = LINE('',#204919,#204920); +#204919 = CARTESIAN_POINT('',(114.730973,-77.475124,1.585)); +#204920 = VECTOR('',#204921,1.); +#204921 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#204922 = ORIENTED_EDGE('',*,*,#204923,.T.); +#204923 = EDGE_CURVE('',#204916,#204806,#204924,.T.); +#204924 = LINE('',#204925,#204926); +#204925 = CARTESIAN_POINT('',(114.745063,-77.454037,1.585)); +#204926 = VECTOR('',#204927,1.); +#204927 = DIRECTION('',(0.735544459429,0.677476455829,0.)); +#204928 = FACE_BOUND('',#204929,.F.); +#204929 = EDGE_LOOP('',(#204930,#204941,#204949,#204957,#204965,#204973, + #204981,#204989)); +#204930 = ORIENTED_EDGE('',*,*,#204931,.T.); +#204931 = EDGE_CURVE('',#204932,#204934,#204936,.T.); +#204932 = VERTEX_POINT('',#204933); +#204933 = CARTESIAN_POINT('',(114.623952,-77.55342,1.585)); +#204934 = VERTEX_POINT('',#204935); +#204935 = CARTESIAN_POINT('',(114.443814,-77.55342,1.585)); +#204936 = CIRCLE('',#204937,0.136032349131); +#204937 = AXIS2_PLACEMENT_3D('',#204938,#204939,#204940); +#204938 = CARTESIAN_POINT('',(114.533883,-77.655363,1.585)); +#204939 = DIRECTION('',(0.,0.,1.)); +#204940 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#204941 = ORIENTED_EDGE('',*,*,#204942,.T.); +#204942 = EDGE_CURVE('',#204934,#204943,#204945,.T.); +#204943 = VERTEX_POINT('',#204944); +#204944 = CARTESIAN_POINT('',(114.415876,-77.581358,1.585)); +#204945 = LINE('',#204946,#204947); +#204946 = CARTESIAN_POINT('',(114.443814,-77.55342,1.585)); +#204947 = VECTOR('',#204948,1.); +#204948 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#204949 = ORIENTED_EDGE('',*,*,#204950,.T.); +#204950 = EDGE_CURVE('',#204943,#204951,#204953,.T.); +#204951 = VERTEX_POINT('',#204952); +#204952 = CARTESIAN_POINT('',(114.384597,-77.643916,1.585)); +#204953 = LINE('',#204954,#204955); +#204954 = CARTESIAN_POINT('',(114.415876,-77.581358,1.585)); +#204955 = VECTOR('',#204956,1.); +#204956 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#204957 = ORIENTED_EDGE('',*,*,#204958,.T.); +#204958 = EDGE_CURVE('',#204951,#204959,#204961,.T.); +#204959 = VERTEX_POINT('',#204960); +#204960 = CARTESIAN_POINT('',(114.384597,-77.863571,1.585)); +#204961 = LINE('',#204962,#204963); +#204962 = CARTESIAN_POINT('',(114.384597,-77.643916,1.585)); +#204963 = VECTOR('',#204964,1.); +#204964 = DIRECTION('',(0.,-1.,0.)); +#204965 = ORIENTED_EDGE('',*,*,#204966,.T.); +#204966 = EDGE_CURVE('',#204959,#204967,#204969,.T.); +#204967 = VERTEX_POINT('',#204968); +#204968 = CARTESIAN_POINT('',(114.683168,-77.863571,1.585)); +#204969 = LINE('',#204970,#204971); +#204970 = CARTESIAN_POINT('',(114.384597,-77.863571,1.585)); +#204971 = VECTOR('',#204972,1.); +#204972 = DIRECTION('',(1.,0.,0.)); +#204973 = ORIENTED_EDGE('',*,*,#204974,.T.); +#204974 = EDGE_CURVE('',#204967,#204975,#204977,.T.); +#204975 = VERTEX_POINT('',#204976); +#204976 = CARTESIAN_POINT('',(114.683168,-77.643916,1.585)); +#204977 = LINE('',#204978,#204979); +#204978 = CARTESIAN_POINT('',(114.683168,-77.863571,1.585)); +#204979 = VECTOR('',#204980,1.); +#204980 = DIRECTION('',(0.,1.,0.)); +#204981 = ORIENTED_EDGE('',*,*,#204982,.T.); +#204982 = EDGE_CURVE('',#204975,#204983,#204985,.T.); +#204983 = VERTEX_POINT('',#204984); +#204984 = CARTESIAN_POINT('',(114.651889,-77.581359,1.585)); +#204985 = LINE('',#204986,#204987); +#204986 = CARTESIAN_POINT('',(114.683168,-77.643916,1.585)); +#204987 = VECTOR('',#204988,1.); +#204988 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#204989 = ORIENTED_EDGE('',*,*,#204990,.T.); +#204990 = EDGE_CURVE('',#204983,#204932,#204991,.T.); +#204991 = LINE('',#204992,#204993); +#204992 = CARTESIAN_POINT('',(114.651889,-77.581359,1.585)); +#204993 = VECTOR('',#204994,1.); +#204994 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#204995 = FACE_BOUND('',#204996,.F.); +#204996 = EDGE_LOOP('',(#204997,#205008,#205016,#205024,#205032,#205040, + #205048,#205056)); +#204997 = ORIENTED_EDGE('',*,*,#204998,.T.); +#204998 = EDGE_CURVE('',#204999,#205001,#205003,.T.); +#204999 = VERTEX_POINT('',#205000); +#205000 = CARTESIAN_POINT('',(115.095381,-77.510564,1.585)); +#205001 = VERTEX_POINT('',#205002); +#205002 = CARTESIAN_POINT('',(114.872384,-77.510563,1.585)); +#205003 = CIRCLE('',#205004,0.182756450193); +#205004 = AXIS2_PLACEMENT_3D('',#205005,#205006,#205007); +#205005 = CARTESIAN_POINT('',(114.98388185064,-77.6553668307,1.585)); +#205006 = DIRECTION('',(0.,0.,1.)); +#205007 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#205008 = ORIENTED_EDGE('',*,*,#205009,.T.); +#205009 = EDGE_CURVE('',#205001,#205010,#205012,.T.); +#205010 = VERTEX_POINT('',#205011); +#205011 = CARTESIAN_POINT('',(114.847837,-77.53511,1.585)); +#205012 = LINE('',#205013,#205014); +#205013 = CARTESIAN_POINT('',(114.872384,-77.510563,1.585)); +#205014 = VECTOR('',#205015,1.); +#205015 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#205016 = ORIENTED_EDGE('',*,*,#205017,.T.); +#205017 = EDGE_CURVE('',#205010,#205018,#205020,.T.); +#205018 = VERTEX_POINT('',#205019); +#205019 = CARTESIAN_POINT('',(114.813168,-77.639118,1.585)); +#205020 = LINE('',#205021,#205022); +#205021 = CARTESIAN_POINT('',(114.847837,-77.53511,1.585)); +#205022 = VECTOR('',#205023,1.); +#205023 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#205024 = ORIENTED_EDGE('',*,*,#205025,.T.); +#205025 = EDGE_CURVE('',#205018,#205026,#205028,.T.); +#205026 = VERTEX_POINT('',#205027); +#205027 = CARTESIAN_POINT('',(114.813168,-77.863571,1.585)); +#205028 = LINE('',#205029,#205030); +#205029 = CARTESIAN_POINT('',(114.813168,-77.639118,1.585)); +#205030 = VECTOR('',#205031,1.); +#205031 = DIRECTION('',(0.,-1.,0.)); +#205032 = ORIENTED_EDGE('',*,*,#205033,.T.); +#205033 = EDGE_CURVE('',#205026,#205034,#205036,.T.); +#205034 = VERTEX_POINT('',#205035); +#205035 = CARTESIAN_POINT('',(115.154597,-77.863571,1.585)); +#205036 = LINE('',#205037,#205038); +#205037 = CARTESIAN_POINT('',(114.813168,-77.863571,1.585)); +#205038 = VECTOR('',#205039,1.); +#205039 = DIRECTION('',(1.,0.,0.)); +#205040 = ORIENTED_EDGE('',*,*,#205041,.T.); +#205041 = EDGE_CURVE('',#205034,#205042,#205044,.T.); +#205042 = VERTEX_POINT('',#205043); +#205043 = CARTESIAN_POINT('',(115.154597,-77.601058,1.585)); +#205044 = LINE('',#205045,#205046); +#205045 = CARTESIAN_POINT('',(115.154597,-77.863571,1.585)); +#205046 = VECTOR('',#205047,1.); +#205047 = DIRECTION('',(0.,1.,0.)); +#205048 = ORIENTED_EDGE('',*,*,#205049,.T.); +#205049 = EDGE_CURVE('',#205042,#205050,#205052,.T.); +#205050 = VERTEX_POINT('',#205051); +#205051 = CARTESIAN_POINT('',(115.123318,-77.538501,1.585)); +#205052 = LINE('',#205053,#205054); +#205053 = CARTESIAN_POINT('',(115.154597,-77.601058,1.585)); +#205054 = VECTOR('',#205055,1.); +#205055 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#205056 = ORIENTED_EDGE('',*,*,#205057,.T.); +#205057 = EDGE_CURVE('',#205050,#204999,#205058,.T.); +#205058 = LINE('',#205059,#205060); +#205059 = CARTESIAN_POINT('',(115.123318,-77.538501,1.585)); +#205060 = VECTOR('',#205061,1.); +#205061 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#205062 = PLANE('',#205063); +#205063 = AXIS2_PLACEMENT_3D('',#205064,#205065,#205066); +#205064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205065 = DIRECTION('',(0.,0.,1.)); +#205066 = DIRECTION('',(1.,0.,-0.)); +#205067 = SHELL_BASED_SURFACE_MODEL('',(#205068)); +#205068 = OPEN_SHELL('',(#205069)); +#205069 = ADVANCED_FACE('',(#205070),#205172,.T.); +#205070 = FACE_BOUND('',#205071,.F.); +#205071 = EDGE_LOOP('',(#205072,#205083,#205091,#205099,#205107,#205116, + #205124,#205132,#205141,#205149,#205158,#205166)); +#205072 = ORIENTED_EDGE('',*,*,#205073,.T.); +#205073 = EDGE_CURVE('',#205074,#205076,#205078,.T.); +#205074 = VERTEX_POINT('',#205075); +#205075 = CARTESIAN_POINT('',(134.549545,-77.425125,1.585)); +#205076 = VERTEX_POINT('',#205077); +#205077 = CARTESIAN_POINT('',(134.674597,-77.449999,1.585)); +#205078 = CIRCLE('',#205079,6.499988811649E-02); +#205079 = AXIS2_PLACEMENT_3D('',#205080,#205081,#205082); +#205080 = CARTESIAN_POINT('',(134.60959711188,-77.4499992701,1.585)); +#205081 = DIRECTION('',(0.,0.,-1.)); +#205082 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#205083 = ORIENTED_EDGE('',*,*,#205084,.T.); +#205084 = EDGE_CURVE('',#205076,#205085,#205087,.T.); +#205085 = VERTEX_POINT('',#205086); +#205086 = CARTESIAN_POINT('',(134.674597,-77.813571,1.585)); +#205087 = LINE('',#205088,#205089); +#205088 = CARTESIAN_POINT('',(134.674597,-77.449999,1.585)); +#205089 = VECTOR('',#205090,1.); +#205090 = DIRECTION('',(0.,-1.,0.)); +#205091 = ORIENTED_EDGE('',*,*,#205092,.T.); +#205092 = EDGE_CURVE('',#205085,#205093,#205095,.T.); +#205093 = VERTEX_POINT('',#205094); +#205094 = CARTESIAN_POINT('',(134.973168,-77.813571,1.585)); +#205095 = LINE('',#205096,#205097); +#205096 = CARTESIAN_POINT('',(134.674597,-77.813571,1.585)); +#205097 = VECTOR('',#205098,1.); +#205098 = DIRECTION('',(1.,0.,0.)); +#205099 = ORIENTED_EDGE('',*,*,#205100,.T.); +#205100 = EDGE_CURVE('',#205093,#205101,#205103,.T.); +#205101 = VERTEX_POINT('',#205102); +#205102 = CARTESIAN_POINT('',(134.973168,-77.578571,1.585)); +#205103 = LINE('',#205104,#205105); +#205104 = CARTESIAN_POINT('',(134.973168,-77.813571,1.585)); +#205105 = VECTOR('',#205106,1.); +#205106 = DIRECTION('',(0.,1.,0.)); +#205107 = ORIENTED_EDGE('',*,*,#205108,.T.); +#205108 = EDGE_CURVE('',#205101,#205109,#205111,.T.); +#205109 = VERTEX_POINT('',#205110); +#205110 = CARTESIAN_POINT('',(135.103168,-77.578571,1.585)); +#205111 = CIRCLE('',#205112,6.500000000093E-02); +#205112 = AXIS2_PLACEMENT_3D('',#205113,#205114,#205115); +#205113 = CARTESIAN_POINT('',(135.038168,-77.57857134486,1.585)); +#205114 = DIRECTION('',(0.,0.,-1.)); +#205115 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#205116 = ORIENTED_EDGE('',*,*,#205117,.T.); +#205117 = EDGE_CURVE('',#205109,#205118,#205120,.T.); +#205118 = VERTEX_POINT('',#205119); +#205119 = CARTESIAN_POINT('',(135.103168,-77.813571,1.585)); +#205120 = LINE('',#205121,#205122); +#205121 = CARTESIAN_POINT('',(135.103168,-77.578571,1.585)); +#205122 = VECTOR('',#205123,1.); +#205123 = DIRECTION('',(0.,-1.,0.)); +#205124 = ORIENTED_EDGE('',*,*,#205125,.T.); +#205125 = EDGE_CURVE('',#205118,#205126,#205128,.T.); +#205126 = VERTEX_POINT('',#205127); +#205127 = CARTESIAN_POINT('',(135.509597,-77.813571,1.585)); +#205128 = LINE('',#205129,#205130); +#205129 = CARTESIAN_POINT('',(135.103168,-77.813571,1.585)); +#205130 = VECTOR('',#205131,1.); +#205131 = DIRECTION('',(1.,0.,0.)); +#205132 = ORIENTED_EDGE('',*,*,#205133,.T.); +#205133 = EDGE_CURVE('',#205126,#205134,#205136,.T.); +#205134 = VERTEX_POINT('',#205135); +#205135 = CARTESIAN_POINT('',(135.509597,-77.943571,1.585)); +#205136 = CIRCLE('',#205137,6.500000000092E-02); +#205137 = AXIS2_PLACEMENT_3D('',#205138,#205139,#205140); +#205138 = CARTESIAN_POINT('',(135.50959665513,-77.878571,1.585)); +#205139 = DIRECTION('',(0.,0.,-1.)); +#205140 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#205141 = ORIENTED_EDGE('',*,*,#205142,.T.); +#205142 = EDGE_CURVE('',#205134,#205143,#205145,.T.); +#205143 = VERTEX_POINT('',#205144); +#205144 = CARTESIAN_POINT('',(134.609597,-77.943571,1.585)); +#205145 = LINE('',#205146,#205147); +#205146 = CARTESIAN_POINT('',(135.509597,-77.943571,1.585)); +#205147 = VECTOR('',#205148,1.); +#205148 = DIRECTION('',(-1.,0.,0.)); +#205149 = ORIENTED_EDGE('',*,*,#205150,.T.); +#205150 = EDGE_CURVE('',#205143,#205151,#205153,.T.); +#205151 = VERTEX_POINT('',#205152); +#205152 = CARTESIAN_POINT('',(134.544597,-77.878571,1.585)); +#205153 = CIRCLE('',#205154,6.500103935387E-02); +#205154 = AXIS2_PLACEMENT_3D('',#205155,#205156,#205157); +#205155 = CARTESIAN_POINT('',(134.60959803934,-77.87856996065,1.585)); +#205156 = DIRECTION('',(0.,0.,-1.)); +#205157 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#205158 = ORIENTED_EDGE('',*,*,#205159,.T.); +#205159 = EDGE_CURVE('',#205151,#205160,#205162,.T.); +#205160 = VERTEX_POINT('',#205161); +#205161 = CARTESIAN_POINT('',(134.544597,-77.449999,1.585)); +#205162 = LINE('',#205163,#205164); +#205163 = CARTESIAN_POINT('',(134.544597,-77.878571,1.585)); +#205164 = VECTOR('',#205165,1.); +#205165 = DIRECTION('',(0.,1.,0.)); +#205166 = ORIENTED_EDGE('',*,*,#205167,.T.); +#205167 = EDGE_CURVE('',#205160,#205074,#205168,.T.); +#205168 = LINE('',#205169,#205170); +#205169 = CARTESIAN_POINT('',(134.544597,-77.449999,1.585)); +#205170 = VECTOR('',#205171,1.); +#205171 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#205172 = PLANE('',#205173); +#205173 = AXIS2_PLACEMENT_3D('',#205174,#205175,#205176); +#205174 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205175 = DIRECTION('',(0.,0.,1.)); +#205176 = DIRECTION('',(1.,0.,-0.)); +#205177 = SHELL_BASED_SURFACE_MODEL('',(#205178)); +#205178 = OPEN_SHELL('',(#205179)); +#205179 = ADVANCED_FACE('',(#205180),#205307,.T.); +#205180 = FACE_BOUND('',#205181,.F.); +#205181 = EDGE_LOOP('',(#205182,#205193,#205201,#205209,#205217,#205225, + #205234,#205242,#205250,#205258,#205267,#205275,#205284,#205292, + #205301)); +#205182 = ORIENTED_EDGE('',*,*,#205183,.T.); +#205183 = EDGE_CURVE('',#205184,#205186,#205188,.T.); +#205184 = VERTEX_POINT('',#205185); +#205185 = CARTESIAN_POINT('',(145.239597,-77.429285,1.585)); +#205186 = VERTEX_POINT('',#205187); +#205187 = CARTESIAN_POINT('',(145.239597,-77.299285,1.585)); +#205188 = CIRCLE('',#205189,6.500000000091E-02); +#205189 = AXIS2_PLACEMENT_3D('',#205190,#205191,#205192); +#205190 = CARTESIAN_POINT('',(145.23959734486,-77.364285,1.585)); +#205191 = DIRECTION('',(0.,0.,-1.)); +#205192 = DIRECTION('',(-5.305657588412E-06,-0.999999999986,-0.)); +#205193 = ORIENTED_EDGE('',*,*,#205194,.T.); +#205194 = EDGE_CURVE('',#205186,#205195,#205197,.T.); +#205195 = VERTEX_POINT('',#205196); +#205196 = CARTESIAN_POINT('',(145.971361,-77.29992,1.585)); +#205197 = LINE('',#205198,#205199); +#205198 = CARTESIAN_POINT('',(145.239597,-77.299285,1.585)); +#205199 = VECTOR('',#205200,1.); +#205200 = DIRECTION('',(0.999999623491,-8.677657836673E-04,0.)); +#205201 = ORIENTED_EDGE('',*,*,#205202,.T.); +#205202 = EDGE_CURVE('',#205195,#205203,#205205,.T.); +#205203 = VERTEX_POINT('',#205204); +#205204 = CARTESIAN_POINT('',(145.997237,-77.306147,1.585)); +#205205 = LINE('',#205206,#205207); +#205206 = CARTESIAN_POINT('',(145.971361,-77.29992,1.585)); +#205207 = VECTOR('',#205208,1.); +#205208 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#205209 = ORIENTED_EDGE('',*,*,#205210,.T.); +#205210 = EDGE_CURVE('',#205203,#205211,#205213,.T.); +#205211 = VERTEX_POINT('',#205212); +#205212 = CARTESIAN_POINT('',(146.099843,-77.36118,1.585)); +#205213 = LINE('',#205214,#205215); +#205214 = CARTESIAN_POINT('',(145.997237,-77.306147,1.585)); +#205215 = VECTOR('',#205216,1.); +#205216 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#205217 = ORIENTED_EDGE('',*,*,#205218,.T.); +#205218 = EDGE_CURVE('',#205211,#205219,#205221,.T.); +#205219 = VERTEX_POINT('',#205220); +#205220 = CARTESIAN_POINT('',(146.154878,-77.42093,1.585)); +#205221 = LINE('',#205222,#205223); +#205222 = CARTESIAN_POINT('',(146.099843,-77.36118,1.585)); +#205223 = VECTOR('',#205224,1.); +#205224 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#205225 = ORIENTED_EDGE('',*,*,#205226,.T.); +#205226 = EDGE_CURVE('',#205219,#205227,#205229,.T.); +#205227 = VERTEX_POINT('',#205228); +#205228 = CARTESIAN_POINT('',(146.148491,-77.830154,1.585)); +#205229 = CIRCLE('',#205230,0.358409955812); +#205230 = AXIS2_PLACEMENT_3D('',#205231,#205232,#205233); +#205231 = CARTESIAN_POINT('',(145.85747311066,-77.62095006955,1.585)); +#205232 = DIRECTION('',(0.,0.,-1.)); +#205233 = DIRECTION('',(0.82978969895,0.558076209416,0.)); +#205234 = ORIENTED_EDGE('',*,*,#205235,.T.); +#205235 = EDGE_CURVE('',#205227,#205236,#205238,.T.); +#205236 = VERTEX_POINT('',#205237); +#205237 = CARTESIAN_POINT('',(146.091186,-77.88746,1.585)); +#205238 = LINE('',#205239,#205240); +#205239 = CARTESIAN_POINT('',(146.148491,-77.830154,1.585)); +#205240 = VECTOR('',#205241,1.); +#205241 = DIRECTION('',(-0.707100611536,-0.707112950784,0.)); +#205242 = ORIENTED_EDGE('',*,*,#205243,.T.); +#205243 = EDGE_CURVE('',#205236,#205244,#205246,.T.); +#205244 = VERTEX_POINT('',#205245); +#205245 = CARTESIAN_POINT('',(145.982824,-77.940655,1.585)); +#205246 = LINE('',#205247,#205248); +#205247 = CARTESIAN_POINT('',(146.091186,-77.88746,1.585)); +#205248 = VECTOR('',#205249,1.); +#205249 = DIRECTION('',(-0.897670530022,-0.44066724354,0.)); +#205250 = ORIENTED_EDGE('',*,*,#205251,.T.); +#205251 = EDGE_CURVE('',#205244,#205252,#205254,.T.); +#205252 = VERTEX_POINT('',#205253); +#205253 = CARTESIAN_POINT('',(145.239597,-77.943571,1.585)); +#205254 = LINE('',#205255,#205256); +#205255 = CARTESIAN_POINT('',(145.982824,-77.940655,1.585)); +#205256 = VECTOR('',#205257,1.); +#205257 = DIRECTION('',(-0.999992303433,-3.923401002397E-03,0.)); +#205258 = ORIENTED_EDGE('',*,*,#205259,.T.); +#205259 = EDGE_CURVE('',#205252,#205260,#205262,.T.); +#205260 = VERTEX_POINT('',#205261); +#205261 = CARTESIAN_POINT('',(145.239597,-77.813571,1.585)); +#205262 = CIRCLE('',#205263,6.500000000091E-02); +#205263 = AXIS2_PLACEMENT_3D('',#205264,#205265,#205266); +#205264 = CARTESIAN_POINT('',(145.23959734486,-77.878571,1.585)); +#205265 = DIRECTION('',(0.,0.,-1.)); +#205266 = DIRECTION('',(-5.30565758841E-06,-0.999999999986,-0.)); +#205267 = ORIENTED_EDGE('',*,*,#205268,.T.); +#205268 = EDGE_CURVE('',#205260,#205269,#205271,.T.); +#205269 = VERTEX_POINT('',#205270); +#205270 = CARTESIAN_POINT('',(145.952823,-77.813571,1.585)); +#205271 = LINE('',#205272,#205273); +#205272 = CARTESIAN_POINT('',(145.239597,-77.813571,1.585)); +#205273 = VECTOR('',#205274,1.); +#205274 = DIRECTION('',(1.,0.,0.)); +#205275 = ORIENTED_EDGE('',*,*,#205276,.T.); +#205276 = EDGE_CURVE('',#205269,#205277,#205279,.T.); +#205277 = VERTEX_POINT('',#205278); +#205278 = CARTESIAN_POINT('',(146.074597,-77.691797,1.585)); +#205279 = CIRCLE('',#205280,0.170996196456); +#205280 = AXIS2_PLACEMENT_3D('',#205281,#205282,#205283); +#205281 = CARTESIAN_POINT('',(145.9092465,-77.6482205,1.585)); +#205282 = DIRECTION('',(0.,0.,1.)); +#205283 = DIRECTION('',(0.254839001703,-0.966983496866,0.)); +#205284 = ORIENTED_EDGE('',*,*,#205285,.T.); +#205285 = EDGE_CURVE('',#205277,#205286,#205288,.T.); +#205286 = VERTEX_POINT('',#205287); +#205287 = CARTESIAN_POINT('',(146.074597,-77.551058,1.585)); +#205288 = LINE('',#205289,#205290); +#205289 = CARTESIAN_POINT('',(146.074597,-77.691797,1.585)); +#205290 = VECTOR('',#205291,1.); +#205291 = DIRECTION('',(0.,1.,0.)); +#205292 = ORIENTED_EDGE('',*,*,#205293,.T.); +#205293 = EDGE_CURVE('',#205286,#205294,#205296,.T.); +#205294 = VERTEX_POINT('',#205295); +#205295 = CARTESIAN_POINT('',(145.952823,-77.429285,1.585)); +#205296 = CIRCLE('',#205297,0.170997370267); +#205297 = AXIS2_PLACEMENT_3D('',#205298,#205299,#205300); +#205298 = CARTESIAN_POINT('',(145.90924582251,-77.59463653534,1.585)); +#205299 = DIRECTION('',(0.,0.,1.)); +#205300 = DIRECTION('',(0.966980820969,0.254849155144,-0.)); +#205301 = ORIENTED_EDGE('',*,*,#205302,.T.); +#205302 = EDGE_CURVE('',#205294,#205184,#205303,.T.); +#205303 = LINE('',#205304,#205305); +#205304 = CARTESIAN_POINT('',(145.952823,-77.429285,1.585)); +#205305 = VECTOR('',#205306,1.); +#205306 = DIRECTION('',(-1.,0.,0.)); +#205307 = PLANE('',#205308); +#205308 = AXIS2_PLACEMENT_3D('',#205309,#205310,#205311); +#205309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205310 = DIRECTION('',(0.,0.,1.)); +#205311 = DIRECTION('',(1.,0.,-0.)); +#205312 = SHELL_BASED_SURFACE_MODEL('',(#205313)); +#205313 = OPEN_SHELL('',(#205314)); +#205314 = ADVANCED_FACE('',(#205315),#205657,.T.); +#205315 = FACE_BOUND('',#205316,.F.); +#205316 = EDGE_LOOP('',(#205317,#205327,#205335,#205343,#205351,#205359, + #205367,#205375,#205383,#205391,#205399,#205408,#205416,#205424, + #205433,#205441,#205449,#205457,#205465,#205473,#205481,#205489, + #205497,#205505,#205513,#205521,#205529,#205537,#205545,#205553, + #205561,#205569,#205578,#205586,#205594,#205603,#205611,#205619, + #205627,#205635,#205643,#205651)); +#205317 = ORIENTED_EDGE('',*,*,#205318,.T.); +#205318 = EDGE_CURVE('',#205319,#205321,#205323,.T.); +#205319 = VERTEX_POINT('',#205320); +#205320 = CARTESIAN_POINT('',(186.002447,-76.723383,1.585)); +#205321 = VERTEX_POINT('',#205322); +#205322 = CARTESIAN_POINT('',(186.184204,-76.633673,1.585)); +#205323 = LINE('',#205324,#205325); +#205324 = CARTESIAN_POINT('',(186.002447,-76.723383,1.585)); +#205325 = VECTOR('',#205326,1.); +#205326 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#205327 = ORIENTED_EDGE('',*,*,#205328,.T.); +#205328 = EDGE_CURVE('',#205321,#205329,#205331,.T.); +#205329 = VERTEX_POINT('',#205330); +#205330 = CARTESIAN_POINT('',(186.213257,-76.629766,1.585)); +#205331 = LINE('',#205332,#205333); +#205332 = CARTESIAN_POINT('',(186.184204,-76.633673,1.585)); +#205333 = VECTOR('',#205334,1.); +#205334 = DIRECTION('',(0.991078607395,0.133278632812,0.)); +#205335 = ORIENTED_EDGE('',*,*,#205336,.T.); +#205336 = EDGE_CURVE('',#205329,#205337,#205339,.T.); +#205337 = VERTEX_POINT('',#205338); +#205338 = CARTESIAN_POINT('',(186.387098,-76.63188,1.585)); +#205339 = LINE('',#205340,#205341); +#205340 = CARTESIAN_POINT('',(186.213257,-76.629766,1.585)); +#205341 = VECTOR('',#205342,1.); +#205342 = DIRECTION('',(0.999926068863,-1.215963846025E-02,0.)); +#205343 = ORIENTED_EDGE('',*,*,#205344,.T.); +#205344 = EDGE_CURVE('',#205337,#205345,#205347,.T.); +#205345 = VERTEX_POINT('',#205346); +#205346 = CARTESIAN_POINT('',(186.414831,-76.641379,1.585)); +#205347 = LINE('',#205348,#205349); +#205348 = CARTESIAN_POINT('',(186.387098,-76.63188,1.585)); +#205349 = VECTOR('',#205350,1.); +#205350 = DIRECTION('',(0.946044875797,-0.324035635352,0.)); +#205351 = ORIENTED_EDGE('',*,*,#205352,.T.); +#205352 = EDGE_CURVE('',#205345,#205353,#205355,.T.); +#205353 = VERTEX_POINT('',#205354); +#205354 = CARTESIAN_POINT('',(186.587363,-76.73125,1.585)); +#205355 = LINE('',#205356,#205357); +#205356 = CARTESIAN_POINT('',(186.414831,-76.641379,1.585)); +#205357 = VECTOR('',#205358,1.); +#205358 = DIRECTION('',(0.886891794404,-0.461977212661,0.)); +#205359 = ORIENTED_EDGE('',*,*,#205360,.T.); +#205360 = EDGE_CURVE('',#205353,#205361,#205363,.T.); +#205361 = VERTEX_POINT('',#205362); +#205362 = CARTESIAN_POINT('',(186.686782,-76.833718,1.585)); +#205363 = LINE('',#205364,#205365); +#205364 = CARTESIAN_POINT('',(186.587363,-76.73125,1.585)); +#205365 = VECTOR('',#205366,1.); +#205366 = DIRECTION('',(0.696348286451,-0.717704022531,0.)); +#205367 = ORIENTED_EDGE('',*,*,#205368,.T.); +#205368 = EDGE_CURVE('',#205361,#205369,#205371,.T.); +#205369 = VERTEX_POINT('',#205370); +#205370 = CARTESIAN_POINT('',(186.776493,-77.015475,1.585)); +#205371 = LINE('',#205372,#205373); +#205372 = CARTESIAN_POINT('',(186.686782,-76.833718,1.585)); +#205373 = VECTOR('',#205374,1.); +#205374 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#205375 = ORIENTED_EDGE('',*,*,#205376,.T.); +#205376 = EDGE_CURVE('',#205369,#205377,#205379,.T.); +#205377 = VERTEX_POINT('',#205378); +#205378 = CARTESIAN_POINT('',(186.7804,-77.044528,1.585)); +#205379 = LINE('',#205380,#205381); +#205380 = CARTESIAN_POINT('',(186.776493,-77.015475,1.585)); +#205381 = VECTOR('',#205382,1.); +#205382 = DIRECTION('',(0.133278632812,-0.991078607395,0.)); +#205383 = ORIENTED_EDGE('',*,*,#205384,.T.); +#205384 = EDGE_CURVE('',#205377,#205385,#205387,.T.); +#205385 = VERTEX_POINT('',#205386); +#205386 = CARTESIAN_POINT('',(186.778286,-77.44694,1.585)); +#205387 = LINE('',#205388,#205389); +#205388 = CARTESIAN_POINT('',(186.7804,-77.044528,1.585)); +#205389 = VECTOR('',#205390,1.); +#205390 = DIRECTION('',(-5.253249977965E-03,-0.999986201587,0.)); +#205391 = ORIENTED_EDGE('',*,*,#205392,.T.); +#205392 = EDGE_CURVE('',#205385,#205393,#205395,.T.); +#205393 = VERTEX_POINT('',#205394); +#205394 = CARTESIAN_POINT('',(186.689774,-77.708527,1.585)); +#205395 = LINE('',#205396,#205397); +#205396 = CARTESIAN_POINT('',(186.778286,-77.44694,1.585)); +#205397 = VECTOR('',#205398,1.); +#205398 = DIRECTION('',(-0.320514499422,-0.947243609459,0.)); +#205399 = ORIENTED_EDGE('',*,*,#205400,.T.); +#205400 = EDGE_CURVE('',#205393,#205401,#205403,.T.); +#205401 = VERTEX_POINT('',#205402); +#205402 = CARTESIAN_POINT('',(186.485074,-77.640294,1.585)); +#205403 = CIRCLE('',#205404,0.109999929666); +#205404 = AXIS2_PLACEMENT_3D('',#205405,#205406,#205407); +#205405 = CARTESIAN_POINT('',(186.5942101801,-77.65405186021,1.585)); +#205406 = DIRECTION('',(-0.,0.,-1.)); +#205407 = DIRECTION('',(0.868762554498,-0.495228860126,-0.)); +#205408 = ORIENTED_EDGE('',*,*,#205409,.T.); +#205409 = EDGE_CURVE('',#205401,#205410,#205412,.T.); +#205410 = VERTEX_POINT('',#205411); +#205411 = CARTESIAN_POINT('',(186.5604,-77.40763,1.585)); +#205412 = LINE('',#205413,#205414); +#205413 = CARTESIAN_POINT('',(186.485074,-77.640294,1.585)); +#205414 = VECTOR('',#205415,1.); +#205415 = DIRECTION('',(0.30801407006,0.951381801721,0.)); +#205416 = ORIENTED_EDGE('',*,*,#205417,.T.); +#205417 = EDGE_CURVE('',#205410,#205418,#205420,.T.); +#205418 = VERTEX_POINT('',#205419); +#205419 = CARTESIAN_POINT('',(186.5604,-77.070494,1.585)); +#205420 = LINE('',#205421,#205422); +#205421 = CARTESIAN_POINT('',(186.5604,-77.40763,1.585)); +#205422 = VECTOR('',#205423,1.); +#205423 = DIRECTION('',(0.,1.,0.)); +#205424 = ORIENTED_EDGE('',*,*,#205425,.T.); +#205425 = EDGE_CURVE('',#205418,#205426,#205428,.T.); +#205426 = VERTEX_POINT('',#205427); +#205427 = CARTESIAN_POINT('',(186.339671,-76.849766,1.585)); +#205428 = CIRCLE('',#205429,0.310264637157); +#205429 = AXIS2_PLACEMENT_3D('',#205430,#205431,#205432); +#205430 = CARTESIAN_POINT('',(186.26042631778,-77.14974004122,1.585)); +#205431 = DIRECTION('',(0.,0.,1.)); +#205432 = DIRECTION('',(0.966831685881,0.255414351939,-0.)); +#205433 = ORIENTED_EDGE('',*,*,#205434,.T.); +#205434 = EDGE_CURVE('',#205426,#205435,#205437,.T.); +#205435 = VERTEX_POINT('',#205436); +#205436 = CARTESIAN_POINT('',(186.239224,-76.849766,1.585)); +#205437 = LINE('',#205438,#205439); +#205438 = CARTESIAN_POINT('',(186.339671,-76.849766,1.585)); +#205439 = VECTOR('',#205440,1.); +#205440 = DIRECTION('',(-1.,0.,0.)); +#205441 = ORIENTED_EDGE('',*,*,#205442,.T.); +#205442 = EDGE_CURVE('',#205435,#205443,#205445,.T.); +#205443 = VERTEX_POINT('',#205444); +#205444 = CARTESIAN_POINT('',(186.126036,-76.906359,1.585)); +#205445 = LINE('',#205446,#205447); +#205446 = CARTESIAN_POINT('',(186.239224,-76.849766,1.585)); +#205447 = VECTOR('',#205448,1.); +#205448 = DIRECTION('',(-0.894430351844,-0.447207273756,0.)); +#205449 = ORIENTED_EDGE('',*,*,#205450,.T.); +#205450 = EDGE_CURVE('',#205443,#205451,#205453,.T.); +#205451 = VERTEX_POINT('',#205452); +#205452 = CARTESIAN_POINT('',(186.07509,-76.957305,1.585)); +#205453 = LINE('',#205454,#205455); +#205454 = CARTESIAN_POINT('',(186.126036,-76.906359,1.585)); +#205455 = VECTOR('',#205456,1.); +#205456 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#205457 = ORIENTED_EDGE('',*,*,#205458,.T.); +#205458 = EDGE_CURVE('',#205451,#205459,#205461,.T.); +#205459 = VERTEX_POINT('',#205460); +#205460 = CARTESIAN_POINT('',(186.012282,-77.082921,1.585)); +#205461 = LINE('',#205462,#205463); +#205462 = CARTESIAN_POINT('',(186.07509,-76.957305,1.585)); +#205463 = VECTOR('',#205464,1.); +#205464 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#205465 = ORIENTED_EDGE('',*,*,#205466,.T.); +#205466 = EDGE_CURVE('',#205459,#205467,#205469,.T.); +#205467 = VERTEX_POINT('',#205468); +#205468 = CARTESIAN_POINT('',(185.930692,-77.398484,1.585)); +#205469 = LINE('',#205470,#205471); +#205470 = CARTESIAN_POINT('',(186.012282,-77.082921,1.585)); +#205471 = VECTOR('',#205472,1.); +#205472 = DIRECTION('',(-0.250322084543,-0.968162617534,0.)); +#205473 = ORIENTED_EDGE('',*,*,#205474,.T.); +#205474 = EDGE_CURVE('',#205467,#205475,#205477,.T.); +#205475 = VERTEX_POINT('',#205476); +#205476 = CARTESIAN_POINT('',(185.840817,-77.571018,1.585)); +#205477 = LINE('',#205478,#205479); +#205478 = CARTESIAN_POINT('',(185.930692,-77.398484,1.585)); +#205479 = VECTOR('',#205480,1.); +#205480 = DIRECTION('',(-0.461989173503,-0.886885563963,0.)); +#205481 = ORIENTED_EDGE('',*,*,#205482,.T.); +#205482 = EDGE_CURVE('',#205475,#205483,#205485,.T.); +#205483 = VERTEX_POINT('',#205484); +#205484 = CARTESIAN_POINT('',(185.738354,-77.670432,1.585)); +#205485 = LINE('',#205486,#205487); +#205486 = CARTESIAN_POINT('',(185.840817,-77.571018,1.585)); +#205487 = VECTOR('',#205488,1.); +#205488 = DIRECTION('',(-0.717704543353,-0.696347749655,0.)); +#205489 = ORIENTED_EDGE('',*,*,#205490,.T.); +#205490 = EDGE_CURVE('',#205483,#205491,#205493,.T.); +#205491 = VERTEX_POINT('',#205492); +#205492 = CARTESIAN_POINT('',(185.556597,-77.760145,1.585)); +#205493 = LINE('',#205494,#205495); +#205494 = CARTESIAN_POINT('',(185.738354,-77.670432,1.585)); +#205495 = VECTOR('',#205496,1.); +#205496 = DIRECTION('',(-0.896715403621,-0.442607596984,0.)); +#205497 = ORIENTED_EDGE('',*,*,#205498,.T.); +#205498 = EDGE_CURVE('',#205491,#205499,#205501,.T.); +#205499 = VERTEX_POINT('',#205500); +#205500 = CARTESIAN_POINT('',(185.527543,-77.764052,1.585)); +#205501 = LINE('',#205502,#205503); +#205502 = CARTESIAN_POINT('',(185.556597,-77.760145,1.585)); +#205503 = VECTOR('',#205504,1.); +#205504 = DIRECTION('',(-0.991079213316,-0.13327412702,0.)); +#205505 = ORIENTED_EDGE('',*,*,#205506,.T.); +#205506 = EDGE_CURVE('',#205499,#205507,#205509,.T.); +#205507 = VERTEX_POINT('',#205508); +#205508 = CARTESIAN_POINT('',(185.353702,-77.761938,1.585)); +#205509 = LINE('',#205510,#205511); +#205510 = CARTESIAN_POINT('',(185.527543,-77.764052,1.585)); +#205511 = VECTOR('',#205512,1.); +#205512 = DIRECTION('',(-0.999926068863,1.215963846033E-02,0.)); +#205513 = ORIENTED_EDGE('',*,*,#205514,.T.); +#205514 = EDGE_CURVE('',#205507,#205515,#205517,.T.); +#205515 = VERTEX_POINT('',#205516); +#205516 = CARTESIAN_POINT('',(185.325968,-77.752439,1.585)); +#205517 = LINE('',#205518,#205519); +#205518 = CARTESIAN_POINT('',(185.353702,-77.761938,1.585)); +#205519 = VECTOR('',#205520,1.); +#205520 = DIRECTION('',(-0.946048457417,0.324025178373,0.)); +#205521 = ORIENTED_EDGE('',*,*,#205522,.T.); +#205522 = EDGE_CURVE('',#205515,#205523,#205525,.T.); +#205523 = VERTEX_POINT('',#205524); +#205524 = CARTESIAN_POINT('',(185.153435,-77.662566,1.585)); +#205525 = LINE('',#205526,#205527); +#205526 = CARTESIAN_POINT('',(185.325968,-77.752439,1.585)); +#205527 = VECTOR('',#205528,1.); +#205528 = DIRECTION('',(-0.886888679175,0.461983193148,0.)); +#205529 = ORIENTED_EDGE('',*,*,#205530,.T.); +#205530 = EDGE_CURVE('',#205523,#205531,#205533,.T.); +#205531 = VERTEX_POINT('',#205532); +#205532 = CARTESIAN_POINT('',(185.054017,-77.560099,1.585)); +#205533 = LINE('',#205534,#205535); +#205534 = CARTESIAN_POINT('',(185.153435,-77.662566,1.585)); +#205535 = VECTOR('',#205536,1.); +#205536 = DIRECTION('',(-0.696348179096,0.717704126691,0.)); +#205537 = ORIENTED_EDGE('',*,*,#205538,.T.); +#205538 = EDGE_CURVE('',#205531,#205539,#205541,.T.); +#205539 = VERTEX_POINT('',#205540); +#205540 = CARTESIAN_POINT('',(184.964307,-77.378343,1.585)); +#205541 = LINE('',#205542,#205543); +#205542 = CARTESIAN_POINT('',(185.054017,-77.560099,1.585)); +#205543 = VECTOR('',#205544,1.); +#205544 = DIRECTION('',(-0.442597653669,0.89672031145,0.)); +#205545 = ORIENTED_EDGE('',*,*,#205546,.T.); +#205546 = EDGE_CURVE('',#205539,#205547,#205549,.T.); +#205547 = VERTEX_POINT('',#205548); +#205548 = CARTESIAN_POINT('',(184.9604,-77.34929,1.585)); +#205549 = LINE('',#205550,#205551); +#205550 = CARTESIAN_POINT('',(184.964307,-77.378343,1.585)); +#205551 = VECTOR('',#205552,1.); +#205552 = DIRECTION('',(-0.133278632812,0.991078607395,0.)); +#205553 = ORIENTED_EDGE('',*,*,#205554,.T.); +#205554 = EDGE_CURVE('',#205547,#205555,#205557,.T.); +#205555 = VERTEX_POINT('',#205556); +#205556 = CARTESIAN_POINT('',(184.962514,-76.946877,1.585)); +#205557 = LINE('',#205558,#205559); +#205558 = CARTESIAN_POINT('',(184.9604,-77.34929,1.585)); +#205559 = VECTOR('',#205560,1.); +#205560 = DIRECTION('',(5.253236924021E-03,0.999986201656,0.)); +#205561 = ORIENTED_EDGE('',*,*,#205562,.T.); +#205562 = EDGE_CURVE('',#205555,#205563,#205565,.T.); +#205563 = VERTEX_POINT('',#205564); +#205564 = CARTESIAN_POINT('',(185.051027,-76.685291,1.585)); +#205565 = LINE('',#205566,#205567); +#205566 = CARTESIAN_POINT('',(184.962514,-76.946877,1.585)); +#205567 = VECTOR('',#205568,1.); +#205568 = DIRECTION('',(0.32051884797,0.947242138049,0.)); +#205569 = ORIENTED_EDGE('',*,*,#205570,.T.); +#205570 = EDGE_CURVE('',#205563,#205571,#205573,.T.); +#205571 = VERTEX_POINT('',#205572); +#205572 = CARTESIAN_POINT('',(185.255726,-76.753524,1.585)); +#205573 = CIRCLE('',#205574,0.109999365974); +#205574 = AXIS2_PLACEMENT_3D('',#205575,#205576,#205577); +#205575 = CARTESIAN_POINT('',(185.14659044966,-76.73976565101,1.585)); +#205576 = DIRECTION('',(0.,0.,-1.)); +#205577 = DIRECTION('',(-0.868763640723,0.495226954596,0.)); +#205578 = ORIENTED_EDGE('',*,*,#205579,.T.); +#205579 = EDGE_CURVE('',#205571,#205580,#205582,.T.); +#205580 = VERTEX_POINT('',#205581); +#205581 = CARTESIAN_POINT('',(185.1804,-76.986186,1.585)); +#205582 = LINE('',#205583,#205584); +#205583 = CARTESIAN_POINT('',(185.255726,-76.753524,1.585)); +#205584 = VECTOR('',#205585,1.); +#205585 = DIRECTION('',(-0.308016466597,-0.951381025828,0.)); +#205586 = ORIENTED_EDGE('',*,*,#205587,.T.); +#205587 = EDGE_CURVE('',#205580,#205588,#205590,.T.); +#205588 = VERTEX_POINT('',#205589); +#205589 = CARTESIAN_POINT('',(185.1804,-77.323323,1.585)); +#205590 = LINE('',#205591,#205592); +#205591 = CARTESIAN_POINT('',(185.1804,-76.986186,1.585)); +#205592 = VECTOR('',#205593,1.); +#205593 = DIRECTION('',(0.,-1.,0.)); +#205594 = ORIENTED_EDGE('',*,*,#205595,.T.); +#205595 = EDGE_CURVE('',#205588,#205596,#205598,.T.); +#205596 = VERTEX_POINT('',#205597); +#205597 = CARTESIAN_POINT('',(185.401129,-77.544052,1.585)); +#205598 = CIRCLE('',#205599,0.31025820014); +#205599 = AXIS2_PLACEMENT_3D('',#205600,#205601,#205602); +#205600 = CARTESIAN_POINT('',(185.48036869962,-77.24408330037,1.585)); +#205601 = DIRECTION('',(0.,0.,1.)); +#205602 = DIRECTION('',(-0.966835685546,-0.255399211344,0.)); +#205603 = ORIENTED_EDGE('',*,*,#205604,.T.); +#205604 = EDGE_CURVE('',#205596,#205605,#205607,.T.); +#205605 = VERTEX_POINT('',#205606); +#205606 = CARTESIAN_POINT('',(185.501575,-77.544052,1.585)); +#205607 = LINE('',#205608,#205609); +#205608 = CARTESIAN_POINT('',(185.401129,-77.544052,1.585)); +#205609 = VECTOR('',#205610,1.); +#205610 = DIRECTION('',(1.,0.,0.)); +#205611 = ORIENTED_EDGE('',*,*,#205612,.T.); +#205612 = EDGE_CURVE('',#205605,#205613,#205615,.T.); +#205613 = VERTEX_POINT('',#205614); +#205614 = CARTESIAN_POINT('',(185.614763,-77.487457,1.585)); +#205615 = LINE('',#205616,#205617); +#205616 = CARTESIAN_POINT('',(185.501575,-77.544052,1.585)); +#205617 = VECTOR('',#205618,1.); +#205618 = DIRECTION('',(0.894424030134,0.447219917177,0.)); +#205619 = ORIENTED_EDGE('',*,*,#205620,.T.); +#205620 = EDGE_CURVE('',#205613,#205621,#205623,.T.); +#205621 = VERTEX_POINT('',#205622); +#205622 = CARTESIAN_POINT('',(185.66571,-77.43651,1.585)); +#205623 = LINE('',#205624,#205625); +#205624 = CARTESIAN_POINT('',(185.614763,-77.487457,1.585)); +#205625 = VECTOR('',#205626,1.); +#205626 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#205627 = ORIENTED_EDGE('',*,*,#205628,.T.); +#205628 = EDGE_CURVE('',#205621,#205629,#205631,.T.); +#205629 = VERTEX_POINT('',#205630); +#205630 = CARTESIAN_POINT('',(185.728517,-77.310898,1.585)); +#205631 = LINE('',#205632,#205633); +#205632 = CARTESIAN_POINT('',(185.66571,-77.43651,1.585)); +#205633 = VECTOR('',#205634,1.); +#205634 = DIRECTION('',(0.447219291917,0.894424342769,0.)); +#205635 = ORIENTED_EDGE('',*,*,#205636,.T.); +#205636 = EDGE_CURVE('',#205629,#205637,#205639,.T.); +#205637 = VERTEX_POINT('',#205638); +#205638 = CARTESIAN_POINT('',(185.810108,-76.995334,1.585)); +#205639 = LINE('',#205640,#205641); +#205640 = CARTESIAN_POINT('',(185.728517,-77.310898,1.585)); +#205641 = VECTOR('',#205642,1.); +#205642 = DIRECTION('',(0.250324216786,0.968162066232,0.)); +#205643 = ORIENTED_EDGE('',*,*,#205644,.T.); +#205644 = EDGE_CURVE('',#205637,#205645,#205647,.T.); +#205645 = VERTEX_POINT('',#205646); +#205646 = CARTESIAN_POINT('',(185.899979,-76.822803,1.585)); +#205647 = LINE('',#205648,#205649); +#205648 = CARTESIAN_POINT('',(185.810108,-76.995334,1.585)); +#205649 = VECTOR('',#205650,1.); +#205650 = DIRECTION('',(0.461979318834,0.886890697307,0.)); +#205651 = ORIENTED_EDGE('',*,*,#205652,.T.); +#205652 = EDGE_CURVE('',#205645,#205319,#205653,.T.); +#205653 = LINE('',#205654,#205655); +#205654 = CARTESIAN_POINT('',(185.899979,-76.822803,1.585)); +#205655 = VECTOR('',#205656,1.); +#205656 = DIRECTION('',(0.717700522048,0.696351894269,0.)); +#205657 = PLANE('',#205658); +#205658 = AXIS2_PLACEMENT_3D('',#205659,#205660,#205661); +#205659 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205660 = DIRECTION('',(0.,0.,1.)); +#205661 = DIRECTION('',(1.,0.,-0.)); +#205662 = SHELL_BASED_SURFACE_MODEL('',(#205663)); +#205663 = OPEN_SHELL('',(#205664)); +#205664 = ADVANCED_FACE('',(#205665),#205867,.T.); +#205665 = FACE_BOUND('',#205666,.F.); +#205666 = EDGE_LOOP('',(#205667,#205678,#205686,#205694,#205702,#205710, + #205719,#205727,#205736,#205744,#205753,#205761,#205770,#205778, + #205787,#205795,#205804,#205812,#205820,#205828,#205837,#205845, + #205853,#205861)); +#205667 = ORIENTED_EDGE('',*,*,#205668,.T.); +#205668 = EDGE_CURVE('',#205669,#205671,#205673,.T.); +#205669 = VERTEX_POINT('',#205670); +#205670 = CARTESIAN_POINT('',(150.160369,-77.185343,1.585)); +#205671 = VERTEX_POINT('',#205672); +#205672 = CARTESIAN_POINT('',(150.379225,-76.966486,1.585)); +#205673 = CIRCLE('',#205674,0.308109459502); +#205674 = AXIS2_PLACEMENT_3D('',#205675,#205676,#205677); +#205675 = CARTESIAN_POINT('',(150.45818845359,-77.26430509279,1.585)); +#205676 = DIRECTION('',(0.,0.,-1.)); +#205677 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#205678 = ORIENTED_EDGE('',*,*,#205679,.T.); +#205679 = EDGE_CURVE('',#205671,#205680,#205682,.T.); +#205680 = VERTEX_POINT('',#205681); +#205681 = CARTESIAN_POINT('',(150.611361,-76.964206,1.585)); +#205682 = LINE('',#205683,#205684); +#205683 = CARTESIAN_POINT('',(150.379225,-76.966486,1.585)); +#205684 = VECTOR('',#205685,1.); +#205685 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#205686 = ORIENTED_EDGE('',*,*,#205687,.T.); +#205687 = EDGE_CURVE('',#205680,#205688,#205690,.T.); +#205688 = VERTEX_POINT('',#205689); +#205689 = CARTESIAN_POINT('',(150.637237,-76.970433,1.585)); +#205690 = LINE('',#205691,#205692); +#205691 = CARTESIAN_POINT('',(150.611361,-76.964206,1.585)); +#205692 = VECTOR('',#205693,1.); +#205693 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#205694 = ORIENTED_EDGE('',*,*,#205695,.T.); +#205695 = EDGE_CURVE('',#205688,#205696,#205698,.T.); +#205696 = VERTEX_POINT('',#205697); +#205697 = CARTESIAN_POINT('',(150.739844,-77.025466,1.585)); +#205698 = LINE('',#205699,#205700); +#205699 = CARTESIAN_POINT('',(150.637237,-76.970433,1.585)); +#205700 = VECTOR('',#205701,1.); +#205701 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#205702 = ORIENTED_EDGE('',*,*,#205703,.T.); +#205703 = EDGE_CURVE('',#205696,#205704,#205706,.T.); +#205704 = VERTEX_POINT('',#205705); +#205705 = CARTESIAN_POINT('',(150.794878,-77.085217,1.585)); +#205706 = LINE('',#205707,#205708); +#205707 = CARTESIAN_POINT('',(150.739844,-77.025466,1.585)); +#205708 = VECTOR('',#205709,1.); +#205709 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#205710 = ORIENTED_EDGE('',*,*,#205711,.T.); +#205711 = EDGE_CURVE('',#205704,#205712,#205714,.T.); +#205712 = VERTEX_POINT('',#205713); +#205713 = CARTESIAN_POINT('',(150.788491,-77.537297,1.585)); +#205714 = CIRCLE('',#205715,0.407997408492); +#205715 = AXIS2_PLACEMENT_3D('',#205716,#205717,#205718); +#205716 = CARTESIAN_POINT('',(150.4520750414,-77.30645898723,1.585)); +#205717 = DIRECTION('',(0.,0.,-1.)); +#205718 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#205719 = ORIENTED_EDGE('',*,*,#205720,.T.); +#205720 = EDGE_CURVE('',#205712,#205721,#205723,.T.); +#205721 = VERTEX_POINT('',#205722); +#205722 = CARTESIAN_POINT('',(150.739843,-77.588819,1.585)); +#205723 = LINE('',#205724,#205725); +#205724 = CARTESIAN_POINT('',(150.788491,-77.537297,1.585)); +#205725 = VECTOR('',#205726,1.); +#205726 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#205727 = ORIENTED_EDGE('',*,*,#205728,.T.); +#205728 = EDGE_CURVE('',#205721,#205729,#205731,.T.); +#205729 = VERTEX_POINT('',#205730); +#205730 = CARTESIAN_POINT('',(150.647921,-77.496895,1.585)); +#205731 = CIRCLE('',#205732,6.499937665136E-02); +#205732 = AXIS2_PLACEMENT_3D('',#205733,#205734,#205735); +#205733 = CARTESIAN_POINT('',(150.69388218097,-77.54285681902,1.585)); +#205734 = DIRECTION('',(-0.,0.,-1.)); +#205735 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#205736 = ORIENTED_EDGE('',*,*,#205737,.T.); +#205737 = EDGE_CURVE('',#205729,#205738,#205740,.T.); +#205738 = VERTEX_POINT('',#205739); +#205739 = CARTESIAN_POINT('',(150.683319,-77.461497,1.585)); +#205740 = LINE('',#205741,#205742); +#205741 = CARTESIAN_POINT('',(150.647921,-77.496895,1.585)); +#205742 = VECTOR('',#205743,1.); +#205743 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#205744 = ORIENTED_EDGE('',*,*,#205745,.T.); +#205745 = EDGE_CURVE('',#205738,#205746,#205748,.T.); +#205746 = VERTEX_POINT('',#205747); +#205747 = CARTESIAN_POINT('',(150.683319,-77.152789,1.585)); +#205748 = CIRCLE('',#205749,0.277419178294); +#205749 = AXIS2_PLACEMENT_3D('',#205750,#205751,#205752); +#205750 = CARTESIAN_POINT('',(150.452806,-77.307143,1.585)); +#205751 = DIRECTION('',(0.,-0.,1.)); +#205752 = DIRECTION('',(0.830919482273,-0.556392679661,-0.)); +#205753 = ORIENTED_EDGE('',*,*,#205754,.T.); +#205754 = EDGE_CURVE('',#205746,#205755,#205757,.T.); +#205755 = VERTEX_POINT('',#205756); +#205756 = CARTESIAN_POINT('',(150.655379,-77.124849,1.585)); +#205757 = LINE('',#205758,#205759); +#205758 = CARTESIAN_POINT('',(150.683319,-77.152789,1.585)); +#205759 = VECTOR('',#205760,1.); +#205760 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#205761 = ORIENTED_EDGE('',*,*,#205762,.T.); +#205762 = EDGE_CURVE('',#205755,#205763,#205765,.T.); +#205763 = VERTEX_POINT('',#205764); +#205764 = CARTESIAN_POINT('',(150.346671,-77.124849,1.585)); +#205765 = CIRCLE('',#205766,0.277419178293); +#205766 = AXIS2_PLACEMENT_3D('',#205767,#205768,#205769); +#205767 = CARTESIAN_POINT('',(150.501025,-77.355362,1.585)); +#205768 = DIRECTION('',(0.,0.,1.)); +#205769 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#205770 = ORIENTED_EDGE('',*,*,#205771,.T.); +#205771 = EDGE_CURVE('',#205763,#205772,#205774,.T.); +#205772 = VERTEX_POINT('',#205773); +#205773 = CARTESIAN_POINT('',(150.318733,-77.152787,1.585)); +#205774 = LINE('',#205775,#205776); +#205775 = CARTESIAN_POINT('',(150.346671,-77.124849,1.585)); +#205776 = VECTOR('',#205777,1.); +#205777 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#205778 = ORIENTED_EDGE('',*,*,#205779,.T.); +#205779 = EDGE_CURVE('',#205772,#205780,#205782,.T.); +#205780 = VERTEX_POINT('',#205781); +#205781 = CARTESIAN_POINT('',(150.318732,-77.461497,1.585)); +#205782 = CIRCLE('',#205783,0.277420975587); +#205783 = AXIS2_PLACEMENT_3D('',#205784,#205785,#205786); +#205784 = CARTESIAN_POINT('',(150.5492469934,-77.3071427467,1.585)); +#205785 = DIRECTION('',(0.,0.,1.)); +#205786 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#205787 = ORIENTED_EDGE('',*,*,#205788,.T.); +#205788 = EDGE_CURVE('',#205780,#205789,#205791,.T.); +#205789 = VERTEX_POINT('',#205790); +#205790 = CARTESIAN_POINT('',(150.35413,-77.496895,1.585)); +#205791 = LINE('',#205792,#205793); +#205792 = CARTESIAN_POINT('',(150.318732,-77.461497,1.585)); +#205793 = VECTOR('',#205794,1.); +#205794 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#205795 = ORIENTED_EDGE('',*,*,#205796,.T.); +#205796 = EDGE_CURVE('',#205789,#205797,#205799,.T.); +#205797 = VERTEX_POINT('',#205798); +#205798 = CARTESIAN_POINT('',(150.301701,-77.607534,1.585)); +#205799 = CIRCLE('',#205800,6.499980032119E-02); +#205800 = AXIS2_PLACEMENT_3D('',#205801,#205802,#205803); +#205801 = CARTESIAN_POINT('',(150.30816812219,-77.54285672136,1.585)); +#205802 = DIRECTION('',(0.,0.,-1.)); +#205803 = DIRECTION('',(0.707107984623,0.707105577748,0.)); +#205804 = ORIENTED_EDGE('',*,*,#205805,.T.); +#205805 = EDGE_CURVE('',#205797,#205806,#205808,.T.); +#205806 = VERTEX_POINT('',#205807); +#205807 = CARTESIAN_POINT('',(149.854723,-77.560052,1.585)); +#205808 = LINE('',#205809,#205810); +#205809 = CARTESIAN_POINT('',(150.301701,-77.607534,1.585)); +#205810 = VECTOR('',#205811,1.); +#205811 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#205812 = ORIENTED_EDGE('',*,*,#205813,.T.); +#205813 = EDGE_CURVE('',#205806,#205814,#205816,.T.); +#205814 = VERTEX_POINT('',#205815); +#205815 = CARTESIAN_POINT('',(149.817368,-77.518775,1.585)); +#205816 = LINE('',#205817,#205818); +#205817 = CARTESIAN_POINT('',(149.854723,-77.560052,1.585)); +#205818 = VECTOR('',#205819,1.); +#205819 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#205820 = ORIENTED_EDGE('',*,*,#205821,.T.); +#205821 = EDGE_CURVE('',#205814,#205822,#205824,.T.); +#205822 = VERTEX_POINT('',#205823); +#205823 = CARTESIAN_POINT('',(149.814597,-77.071428,1.585)); +#205824 = LINE('',#205825,#205826); +#205825 = CARTESIAN_POINT('',(149.817368,-77.518775,1.585)); +#205826 = VECTOR('',#205827,1.); +#205827 = DIRECTION('',(-6.194177765461E-03,0.999980815897,0.)); +#205828 = ORIENTED_EDGE('',*,*,#205829,.T.); +#205829 = EDGE_CURVE('',#205822,#205830,#205832,.T.); +#205830 = VERTEX_POINT('',#205831); +#205831 = CARTESIAN_POINT('',(149.944597,-77.071428,1.585)); +#205832 = CIRCLE('',#205833,6.500000000092E-02); +#205833 = AXIS2_PLACEMENT_3D('',#205834,#205835,#205836); +#205834 = CARTESIAN_POINT('',(149.879597,-77.07142834486,1.585)); +#205835 = DIRECTION('',(0.,0.,-1.)); +#205836 = DIRECTION('',(-0.999999999986,5.305658462926E-06,0.)); +#205837 = ORIENTED_EDGE('',*,*,#205838,.T.); +#205838 = EDGE_CURVE('',#205830,#205839,#205841,.T.); +#205839 = VERTEX_POINT('',#205840); +#205840 = CARTESIAN_POINT('',(149.944597,-77.441176,1.585)); +#205841 = LINE('',#205842,#205843); +#205842 = CARTESIAN_POINT('',(149.944597,-77.071428,1.585)); +#205843 = VECTOR('',#205844,1.); +#205844 = DIRECTION('',(0.,-1.,0.)); +#205845 = ORIENTED_EDGE('',*,*,#205846,.T.); +#205846 = EDGE_CURVE('',#205839,#205847,#205849,.T.); +#205847 = VERTEX_POINT('',#205848); +#205848 = CARTESIAN_POINT('',(150.174733,-77.464189,1.585)); +#205849 = LINE('',#205850,#205851); +#205850 = CARTESIAN_POINT('',(149.944597,-77.441176,1.585)); +#205851 = VECTOR('',#205852,1.); +#205852 = DIRECTION('',(0.99503744706,-9.95011504901E-02,0.)); +#205853 = ORIENTED_EDGE('',*,*,#205854,.T.); +#205854 = EDGE_CURVE('',#205847,#205855,#205857,.T.); +#205855 = VERTEX_POINT('',#205856); +#205856 = CARTESIAN_POINT('',(150.157618,-77.418894,1.585)); +#205857 = LINE('',#205858,#205859); +#205858 = CARTESIAN_POINT('',(150.174733,-77.464189,1.585)); +#205859 = VECTOR('',#205860,1.); +#205860 = DIRECTION('',(-0.353464827547,0.935447815587,0.)); +#205861 = ORIENTED_EDGE('',*,*,#205862,.T.); +#205862 = EDGE_CURVE('',#205855,#205669,#205863,.T.); +#205863 = LINE('',#205864,#205865); +#205864 = CARTESIAN_POINT('',(150.157618,-77.418894,1.585)); +#205865 = VECTOR('',#205866,1.); +#205866 = DIRECTION('',(1.177819480941E-02,0.999930634658,0.)); +#205867 = PLANE('',#205868); +#205868 = AXIS2_PLACEMENT_3D('',#205869,#205870,#205871); +#205869 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205870 = DIRECTION('',(0.,0.,1.)); +#205871 = DIRECTION('',(1.,0.,-0.)); +#205872 = SHELL_BASED_SURFACE_MODEL('',(#205873)); +#205873 = OPEN_SHELL('',(#205874)); +#205874 = ADVANCED_FACE('',(#205875),#205977,.T.); +#205875 = FACE_BOUND('',#205876,.F.); +#205876 = EDGE_LOOP('',(#205877,#205888,#205896,#205904,#205913,#205921, + #205929,#205938,#205946,#205954,#205963,#205971)); +#205877 = ORIENTED_EDGE('',*,*,#205878,.T.); +#205878 = EDGE_CURVE('',#205879,#205881,#205883,.T.); +#205879 = VERTEX_POINT('',#205880); +#205880 = CARTESIAN_POINT('',(172.288774,-76.373542,1.585)); +#205881 = VERTEX_POINT('',#205882); +#205882 = CARTESIAN_POINT('',(172.39694,-76.445653,1.585)); +#205883 = CIRCLE('',#205884,6.499976899535E-02); +#205884 = AXIS2_PLACEMENT_3D('',#205885,#205886,#205887); +#205885 = CARTESIAN_POINT('',(172.34285675277,-76.40959787082,1.585)); +#205886 = DIRECTION('',(0.,0.,-1.)); +#205887 = DIRECTION('',(-0.83204530747,0.554707676454,0.)); +#205888 = ORIENTED_EDGE('',*,*,#205889,.T.); +#205889 = EDGE_CURVE('',#205881,#205890,#205892,.T.); +#205890 = VERTEX_POINT('',#205891); +#205891 = CARTESIAN_POINT('',(172.120977,-76.859597,1.585)); +#205892 = LINE('',#205893,#205894); +#205893 = CARTESIAN_POINT('',(172.39694,-76.445653,1.585)); +#205894 = VECTOR('',#205895,1.); +#205895 = DIRECTION('',(-0.554700660084,-0.832049985099,0.)); +#205896 = ORIENTED_EDGE('',*,*,#205897,.T.); +#205897 = EDGE_CURVE('',#205890,#205898,#205900,.T.); +#205898 = VERTEX_POINT('',#205899); +#205899 = CARTESIAN_POINT('',(172.39694,-77.273541,1.585)); +#205900 = LINE('',#205901,#205902); +#205901 = CARTESIAN_POINT('',(172.120977,-76.859597,1.585)); +#205902 = VECTOR('',#205903,1.); +#205903 = DIRECTION('',(0.554700660084,-0.832049985099,0.)); +#205904 = ORIENTED_EDGE('',*,*,#205905,.T.); +#205905 = EDGE_CURVE('',#205898,#205906,#205908,.T.); +#205906 = VERTEX_POINT('',#205907); +#205907 = CARTESIAN_POINT('',(172.288774,-77.345652,1.585)); +#205908 = CIRCLE('',#205909,6.499976899535E-02); +#205909 = AXIS2_PLACEMENT_3D('',#205910,#205911,#205912); +#205910 = CARTESIAN_POINT('',(172.34285675277,-77.30959612917,1.585)); +#205911 = DIRECTION('',(0.,0.,-1.)); +#205912 = DIRECTION('',(0.832052914291,0.554696266276,0.)); +#205913 = ORIENTED_EDGE('',*,*,#205914,.T.); +#205914 = EDGE_CURVE('',#205906,#205915,#205917,.T.); +#205915 = VERTEX_POINT('',#205916); +#205916 = CARTESIAN_POINT('',(172.042857,-76.976777,1.585)); +#205917 = LINE('',#205918,#205919); +#205918 = CARTESIAN_POINT('',(172.288774,-77.345652,1.585)); +#205919 = VECTOR('',#205920,1.); +#205920 = DIRECTION('',(-0.554700716758,0.832049947316,0.)); +#205921 = ORIENTED_EDGE('',*,*,#205922,.T.); +#205922 = EDGE_CURVE('',#205915,#205923,#205925,.T.); +#205923 = VERTEX_POINT('',#205924); +#205924 = CARTESIAN_POINT('',(171.79694,-77.345653,1.585)); +#205925 = LINE('',#205926,#205927); +#205926 = CARTESIAN_POINT('',(172.042857,-76.976777,1.585)); +#205927 = VECTOR('',#205928,1.); +#205928 = DIRECTION('',(-0.554699675693,-0.832050641359,0.)); +#205929 = ORIENTED_EDGE('',*,*,#205930,.T.); +#205930 = EDGE_CURVE('',#205923,#205931,#205933,.T.); +#205931 = VERTEX_POINT('',#205932); +#205932 = CARTESIAN_POINT('',(171.688774,-77.273541,1.585)); +#205933 = CIRCLE('',#205934,6.500004634724E-02); +#205934 = AXIS2_PLACEMENT_3D('',#205935,#205936,#205937); +#205935 = CARTESIAN_POINT('',(171.74285720937,-77.30959668594,1.585)); +#205936 = DIRECTION('',(-0.,0.,-1.)); +#205937 = DIRECTION('',(0.832042339427,-0.554712128406,-0.)); +#205938 = ORIENTED_EDGE('',*,*,#205939,.T.); +#205939 = EDGE_CURVE('',#205931,#205940,#205942,.T.); +#205940 = VERTEX_POINT('',#205941); +#205941 = CARTESIAN_POINT('',(171.964736,-76.859597,1.585)); +#205942 = LINE('',#205943,#205944); +#205943 = CARTESIAN_POINT('',(171.688774,-77.273541,1.585)); +#205944 = VECTOR('',#205945,1.); +#205945 = DIRECTION('',(0.554699268506,0.832050912816,0.)); +#205946 = ORIENTED_EDGE('',*,*,#205947,.T.); +#205947 = EDGE_CURVE('',#205940,#205948,#205950,.T.); +#205948 = VERTEX_POINT('',#205949); +#205949 = CARTESIAN_POINT('',(171.688774,-76.445653,1.585)); +#205950 = LINE('',#205951,#205952); +#205951 = CARTESIAN_POINT('',(171.964736,-76.859597,1.585)); +#205952 = VECTOR('',#205953,1.); +#205953 = DIRECTION('',(-0.554699268506,0.832050912816,0.)); +#205954 = ORIENTED_EDGE('',*,*,#205955,.T.); +#205955 = EDGE_CURVE('',#205948,#205956,#205958,.T.); +#205956 = VERTEX_POINT('',#205957); +#205957 = CARTESIAN_POINT('',(171.79694,-76.373541,1.585)); +#205958 = CIRCLE('',#205959,6.500004634766E-02); +#205959 = AXIS2_PLACEMENT_3D('',#205960,#205961,#205962); +#205960 = CARTESIAN_POINT('',(171.74285724669,-76.40959737004,1.585)); +#205961 = DIRECTION('',(0.,0.,-1.)); +#205962 = DIRECTION('',(-0.832049355929,-0.554701603836,-0.)); +#205963 = ORIENTED_EDGE('',*,*,#205964,.T.); +#205964 = EDGE_CURVE('',#205956,#205965,#205967,.T.); +#205965 = VERTEX_POINT('',#205966); +#205966 = CARTESIAN_POINT('',(172.042857,-76.742416,1.585)); +#205967 = LINE('',#205968,#205969); +#205968 = CARTESIAN_POINT('',(171.79694,-76.373541,1.585)); +#205969 = VECTOR('',#205970,1.); +#205970 = DIRECTION('',(0.554700716758,-0.832049947316,0.)); +#205971 = ORIENTED_EDGE('',*,*,#205972,.T.); +#205972 = EDGE_CURVE('',#205965,#205879,#205973,.T.); +#205973 = LINE('',#205974,#205975); +#205974 = CARTESIAN_POINT('',(172.042857,-76.742416,1.585)); +#205975 = VECTOR('',#205976,1.); +#205976 = DIRECTION('',(0.554701757825,0.832049253269,0.)); +#205977 = PLANE('',#205978); +#205978 = AXIS2_PLACEMENT_3D('',#205979,#205980,#205981); +#205979 = CARTESIAN_POINT('',(0.,0.,1.585)); +#205980 = DIRECTION('',(0.,0.,1.)); +#205981 = DIRECTION('',(1.,0.,-0.)); +#205982 = SHELL_BASED_SURFACE_MODEL('',(#205983)); +#205983 = OPEN_SHELL('',(#205984)); +#205984 = ADVANCED_FACE('',(#205985),#206054,.T.); +#205985 = FACE_BOUND('',#205986,.F.); +#205986 = EDGE_LOOP('',(#205987,#205998,#206006,#206015,#206023,#206031, + #206040,#206048)); +#205987 = ORIENTED_EDGE('',*,*,#205988,.T.); +#205988 = EDGE_CURVE('',#205989,#205991,#205993,.T.); +#205989 = VERTEX_POINT('',#205990); +#205990 = CARTESIAN_POINT('',(171.014286,-76.474597,1.585)); +#205991 = VERTEX_POINT('',#205992); +#205992 = CARTESIAN_POINT('',(171.014286,-76.344597,1.585)); +#205993 = CIRCLE('',#205994,6.500000000092E-02); +#205994 = AXIS2_PLACEMENT_3D('',#205995,#205996,#205997); +#205995 = CARTESIAN_POINT('',(171.01428634486,-76.409597,1.585)); +#205996 = DIRECTION('',(0.,0.,-1.)); +#205997 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#205998 = ORIENTED_EDGE('',*,*,#205999,.T.); +#205999 = EDGE_CURVE('',#205991,#206000,#206002,.T.); +#206000 = VERTEX_POINT('',#206001); +#206001 = CARTESIAN_POINT('',(171.528572,-76.344597,1.585)); +#206002 = LINE('',#206003,#206004); +#206003 = CARTESIAN_POINT('',(171.014286,-76.344597,1.585)); +#206004 = VECTOR('',#206005,1.); +#206005 = DIRECTION('',(1.,0.,0.)); +#206006 = ORIENTED_EDGE('',*,*,#206007,.T.); +#206007 = EDGE_CURVE('',#206000,#206008,#206010,.T.); +#206008 = VERTEX_POINT('',#206009); +#206009 = CARTESIAN_POINT('',(171.528572,-76.474597,1.585)); +#206010 = CIRCLE('',#206011,6.500000000092E-02); +#206011 = AXIS2_PLACEMENT_3D('',#206012,#206013,#206014); +#206012 = CARTESIAN_POINT('',(171.52857165513,-76.409597,1.585)); +#206013 = DIRECTION('',(0.,0.,-1.)); +#206014 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#206015 = ORIENTED_EDGE('',*,*,#206016,.T.); +#206016 = EDGE_CURVE('',#206008,#206017,#206019,.T.); +#206017 = VERTEX_POINT('',#206018); +#206018 = CARTESIAN_POINT('',(171.336429,-76.474597,1.585)); +#206019 = LINE('',#206020,#206021); +#206020 = CARTESIAN_POINT('',(171.528572,-76.474597,1.585)); +#206021 = VECTOR('',#206022,1.); +#206022 = DIRECTION('',(-1.,0.,0.)); +#206023 = ORIENTED_EDGE('',*,*,#206024,.T.); +#206024 = EDGE_CURVE('',#206017,#206025,#206027,.T.); +#206025 = VERTEX_POINT('',#206026); +#206026 = CARTESIAN_POINT('',(171.336429,-77.309597,1.585)); +#206027 = LINE('',#206028,#206029); +#206028 = CARTESIAN_POINT('',(171.336429,-76.474597,1.585)); +#206029 = VECTOR('',#206030,1.); +#206030 = DIRECTION('',(0.,-1.,0.)); +#206031 = ORIENTED_EDGE('',*,*,#206032,.T.); +#206032 = EDGE_CURVE('',#206025,#206033,#206035,.T.); +#206033 = VERTEX_POINT('',#206034); +#206034 = CARTESIAN_POINT('',(171.206429,-77.309597,1.585)); +#206035 = CIRCLE('',#206036,6.500000000092E-02); +#206036 = AXIS2_PLACEMENT_3D('',#206037,#206038,#206039); +#206037 = CARTESIAN_POINT('',(171.271429,-77.30959665513,1.585)); +#206038 = DIRECTION('',(-0.,0.,-1.)); +#206039 = DIRECTION('',(0.999999999986,-5.305658462926E-06,-0.)); +#206040 = ORIENTED_EDGE('',*,*,#206041,.T.); +#206041 = EDGE_CURVE('',#206033,#206042,#206044,.T.); +#206042 = VERTEX_POINT('',#206043); +#206043 = CARTESIAN_POINT('',(171.206429,-76.474597,1.585)); +#206044 = LINE('',#206045,#206046); +#206045 = CARTESIAN_POINT('',(171.206429,-77.309597,1.585)); +#206046 = VECTOR('',#206047,1.); +#206047 = DIRECTION('',(0.,1.,0.)); +#206048 = ORIENTED_EDGE('',*,*,#206049,.T.); +#206049 = EDGE_CURVE('',#206042,#205989,#206050,.T.); +#206050 = LINE('',#206051,#206052); +#206051 = CARTESIAN_POINT('',(171.206429,-76.474597,1.585)); +#206052 = VECTOR('',#206053,1.); +#206053 = DIRECTION('',(-1.,0.,0.)); +#206054 = PLANE('',#206055); +#206055 = AXIS2_PLACEMENT_3D('',#206056,#206057,#206058); +#206056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206057 = DIRECTION('',(0.,0.,1.)); +#206058 = DIRECTION('',(1.,0.,-0.)); +#206059 = SHELL_BASED_SURFACE_MODEL('',(#206060)); +#206060 = OPEN_SHELL('',(#206061)); +#206061 = ADVANCED_FACE('',(#206062),#206181,.T.); +#206062 = FACE_BOUND('',#206063,.F.); +#206063 = EDGE_LOOP('',(#206064,#206075,#206083,#206092,#206100,#206109, + #206117,#206125,#206133,#206142,#206150,#206158,#206166,#206175)); +#206064 = ORIENTED_EDGE('',*,*,#206065,.T.); +#206065 = EDGE_CURVE('',#206066,#206068,#206070,.T.); +#206066 = VERTEX_POINT('',#206067); +#206067 = CARTESIAN_POINT('',(82.565672,-75.906451,1.585)); +#206068 = VERTEX_POINT('',#206069); +#206069 = CARTESIAN_POINT('',(82.683526,-75.788597,1.585)); +#206070 = CIRCLE('',#206071,0.150002525551); +#206071 = AXIS2_PLACEMENT_3D('',#206072,#206073,#206074); +#206072 = CARTESIAN_POINT('',(82.712791899413,-75.93571689941,1.585)); +#206073 = DIRECTION('',(0.,0.,-1.)); +#206074 = DIRECTION('',(-0.980782815972,0.195102711139,0.)); +#206075 = ORIENTED_EDGE('',*,*,#206076,.T.); +#206076 = EDGE_CURVE('',#206068,#206077,#206079,.T.); +#206077 = VERTEX_POINT('',#206078); +#206078 = CARTESIAN_POINT('',(85.342054,-75.788597,1.585)); +#206079 = LINE('',#206080,#206081); +#206080 = CARTESIAN_POINT('',(82.683526,-75.788597,1.585)); +#206081 = VECTOR('',#206082,1.); +#206082 = DIRECTION('',(1.,0.,0.)); +#206083 = ORIENTED_EDGE('',*,*,#206084,.T.); +#206084 = EDGE_CURVE('',#206077,#206085,#206087,.T.); +#206085 = VERTEX_POINT('',#206086); +#206086 = CARTESIAN_POINT('',(85.459908,-75.906451,1.585)); +#206087 = CIRCLE('',#206088,0.150002525551); +#206088 = AXIS2_PLACEMENT_3D('',#206089,#206090,#206091); +#206089 = CARTESIAN_POINT('',(85.312788100587,-75.93571689941,1.585)); +#206090 = DIRECTION('',(0.,0.,-1.)); +#206091 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#206092 = ORIENTED_EDGE('',*,*,#206093,.T.); +#206093 = EDGE_CURVE('',#206085,#206094,#206096,.T.); +#206094 = VERTEX_POINT('',#206095); +#206095 = CARTESIAN_POINT('',(85.459908,-77.203074,1.585)); +#206096 = LINE('',#206097,#206098); +#206097 = CARTESIAN_POINT('',(85.459908,-75.906451,1.585)); +#206098 = VECTOR('',#206099,1.); +#206099 = DIRECTION('',(0.,-1.,0.)); +#206100 = ORIENTED_EDGE('',*,*,#206101,.T.); +#206101 = EDGE_CURVE('',#206094,#206102,#206104,.T.); +#206102 = VERTEX_POINT('',#206103); +#206103 = CARTESIAN_POINT('',(85.165672,-77.203074,1.585)); +#206104 = CIRCLE('',#206105,0.150000292066); +#206105 = AXIS2_PLACEMENT_3D('',#206106,#206107,#206108); +#206106 = CARTESIAN_POINT('',(85.31279,-77.17381,1.585)); +#206107 = DIRECTION('',(-0.,0.,-1.)); +#206108 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#206109 = ORIENTED_EDGE('',*,*,#206110,.T.); +#206110 = EDGE_CURVE('',#206102,#206111,#206113,.T.); +#206111 = VERTEX_POINT('',#206112); +#206112 = CARTESIAN_POINT('',(85.16279,-76.085715,1.585)); +#206113 = LINE('',#206114,#206115); +#206114 = CARTESIAN_POINT('',(85.165672,-77.203074,1.585)); +#206115 = VECTOR('',#206116,1.); +#206116 = DIRECTION('',(-2.579287778956E-03,0.999996673632,0.)); +#206117 = ORIENTED_EDGE('',*,*,#206118,.T.); +#206118 = EDGE_CURVE('',#206111,#206119,#206121,.T.); +#206119 = VERTEX_POINT('',#206120); +#206120 = CARTESIAN_POINT('',(84.224695,-76.085715,1.585)); +#206121 = LINE('',#206122,#206123); +#206122 = CARTESIAN_POINT('',(85.16279,-76.085715,1.585)); +#206123 = VECTOR('',#206124,1.); +#206124 = DIRECTION('',(-1.,0.,0.)); +#206125 = ORIENTED_EDGE('',*,*,#206126,.T.); +#206126 = EDGE_CURVE('',#206119,#206127,#206129,.T.); +#206127 = VERTEX_POINT('',#206128); +#206128 = CARTESIAN_POINT('',(84.221813,-76.831646,1.585)); +#206129 = LINE('',#206130,#206131); +#206130 = CARTESIAN_POINT('',(84.224695,-76.085715,1.585)); +#206131 = VECTOR('',#206132,1.); +#206132 = DIRECTION('',(-3.863599300118E-03,-0.999992536272,0.)); +#206133 = ORIENTED_EDGE('',*,*,#206134,.T.); +#206134 = EDGE_CURVE('',#206127,#206135,#206137,.T.); +#206135 = VERTEX_POINT('',#206136); +#206136 = CARTESIAN_POINT('',(83.927577,-76.831646,1.585)); +#206137 = CIRCLE('',#206138,0.150000292066); +#206138 = AXIS2_PLACEMENT_3D('',#206139,#206140,#206141); +#206139 = CARTESIAN_POINT('',(84.074695,-76.802382,1.585)); +#206140 = DIRECTION('',(-0.,0.,-1.)); +#206141 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#206142 = ORIENTED_EDGE('',*,*,#206143,.T.); +#206143 = EDGE_CURVE('',#206135,#206144,#206146,.T.); +#206144 = VERTEX_POINT('',#206145); +#206145 = CARTESIAN_POINT('',(83.924695,-76.085715,1.585)); +#206146 = LINE('',#206147,#206148); +#206147 = CARTESIAN_POINT('',(83.927577,-76.831646,1.585)); +#206148 = VECTOR('',#206149,1.); +#206149 = DIRECTION('',(-3.863599300118E-03,0.999992536272,0.)); +#206150 = ORIENTED_EDGE('',*,*,#206151,.T.); +#206151 = EDGE_CURVE('',#206144,#206152,#206154,.T.); +#206152 = VERTEX_POINT('',#206153); +#206153 = CARTESIAN_POINT('',(82.86279,-76.085715,1.585)); +#206154 = LINE('',#206155,#206156); +#206155 = CARTESIAN_POINT('',(83.924695,-76.085715,1.585)); +#206156 = VECTOR('',#206157,1.); +#206157 = DIRECTION('',(-1.,0.,0.)); +#206158 = ORIENTED_EDGE('',*,*,#206159,.T.); +#206159 = EDGE_CURVE('',#206152,#206160,#206162,.T.); +#206160 = VERTEX_POINT('',#206161); +#206161 = CARTESIAN_POINT('',(82.859908,-77.203074,1.585)); +#206162 = LINE('',#206163,#206164); +#206163 = CARTESIAN_POINT('',(82.86279,-76.085715,1.585)); +#206164 = VECTOR('',#206165,1.); +#206165 = DIRECTION('',(-2.579287778956E-03,-0.999996673632,0.)); +#206166 = ORIENTED_EDGE('',*,*,#206167,.T.); +#206167 = EDGE_CURVE('',#206160,#206168,#206170,.T.); +#206168 = VERTEX_POINT('',#206169); +#206169 = CARTESIAN_POINT('',(82.565672,-77.203074,1.585)); +#206170 = CIRCLE('',#206171,0.150000292066); +#206171 = AXIS2_PLACEMENT_3D('',#206172,#206173,#206174); +#206172 = CARTESIAN_POINT('',(82.71279,-77.17381,1.585)); +#206173 = DIRECTION('',(-0.,0.,-1.)); +#206174 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#206175 = ORIENTED_EDGE('',*,*,#206176,.T.); +#206176 = EDGE_CURVE('',#206168,#206066,#206177,.T.); +#206177 = LINE('',#206178,#206179); +#206178 = CARTESIAN_POINT('',(82.565672,-77.203074,1.585)); +#206179 = VECTOR('',#206180,1.); +#206180 = DIRECTION('',(0.,1.,0.)); +#206181 = PLANE('',#206182); +#206182 = AXIS2_PLACEMENT_3D('',#206183,#206184,#206185); +#206183 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206184 = DIRECTION('',(0.,0.,1.)); +#206185 = DIRECTION('',(1.,0.,-0.)); +#206186 = SHELL_BASED_SURFACE_MODEL('',(#206187)); +#206187 = OPEN_SHELL('',(#206188)); +#206188 = ADVANCED_FACE('',(#206189),#206266,.T.); +#206189 = FACE_BOUND('',#206190,.F.); +#206190 = EDGE_LOOP('',(#206191,#206202,#206210,#206218,#206227,#206235, + #206243,#206252,#206260)); +#206191 = ORIENTED_EDGE('',*,*,#206192,.T.); +#206192 = EDGE_CURVE('',#206193,#206195,#206197,.T.); +#206193 = VERTEX_POINT('',#206194); +#206194 = CARTESIAN_POINT('',(132.049545,-76.675126,1.585)); +#206195 = VERTEX_POINT('',#206196); +#206196 = CARTESIAN_POINT('',(132.174597,-76.7,1.585)); +#206197 = CIRCLE('',#206198,6.499988811649E-02); +#206198 = AXIS2_PLACEMENT_3D('',#206199,#206200,#206201); +#206199 = CARTESIAN_POINT('',(132.10959711188,-76.7000002701,1.585)); +#206200 = DIRECTION('',(0.,0.,-1.)); +#206201 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#206202 = ORIENTED_EDGE('',*,*,#206203,.T.); +#206203 = EDGE_CURVE('',#206195,#206204,#206206,.T.); +#206204 = VERTEX_POINT('',#206205); +#206205 = CARTESIAN_POINT('',(132.174597,-76.892142,1.585)); +#206206 = LINE('',#206207,#206208); +#206207 = CARTESIAN_POINT('',(132.174597,-76.7,1.585)); +#206208 = VECTOR('',#206209,1.); +#206209 = DIRECTION('',(0.,-1.,0.)); +#206210 = ORIENTED_EDGE('',*,*,#206211,.T.); +#206211 = EDGE_CURVE('',#206204,#206212,#206214,.T.); +#206212 = VERTEX_POINT('',#206213); +#206213 = CARTESIAN_POINT('',(133.009597,-76.892142,1.585)); +#206214 = LINE('',#206215,#206216); +#206215 = CARTESIAN_POINT('',(132.174597,-76.892142,1.585)); +#206216 = VECTOR('',#206217,1.); +#206217 = DIRECTION('',(1.,0.,0.)); +#206218 = ORIENTED_EDGE('',*,*,#206219,.T.); +#206219 = EDGE_CURVE('',#206212,#206220,#206222,.T.); +#206220 = VERTEX_POINT('',#206221); +#206221 = CARTESIAN_POINT('',(133.009597,-77.022142,1.585)); +#206222 = CIRCLE('',#206223,6.500000000092E-02); +#206223 = AXIS2_PLACEMENT_3D('',#206224,#206225,#206226); +#206224 = CARTESIAN_POINT('',(133.00959665513,-76.957142,1.585)); +#206225 = DIRECTION('',(0.,0.,-1.)); +#206226 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#206227 = ORIENTED_EDGE('',*,*,#206228,.T.); +#206228 = EDGE_CURVE('',#206220,#206229,#206231,.T.); +#206229 = VERTEX_POINT('',#206230); +#206230 = CARTESIAN_POINT('',(132.174597,-77.022142,1.585)); +#206231 = LINE('',#206232,#206233); +#206232 = CARTESIAN_POINT('',(133.009597,-77.022142,1.585)); +#206233 = VECTOR('',#206234,1.); +#206234 = DIRECTION('',(-1.,0.,0.)); +#206235 = ORIENTED_EDGE('',*,*,#206236,.T.); +#206236 = EDGE_CURVE('',#206229,#206237,#206239,.T.); +#206237 = VERTEX_POINT('',#206238); +#206238 = CARTESIAN_POINT('',(132.174597,-77.214285,1.585)); +#206239 = LINE('',#206240,#206241); +#206240 = CARTESIAN_POINT('',(132.174597,-77.022142,1.585)); +#206241 = VECTOR('',#206242,1.); +#206242 = DIRECTION('',(0.,-1.,0.)); +#206243 = ORIENTED_EDGE('',*,*,#206244,.T.); +#206244 = EDGE_CURVE('',#206237,#206245,#206247,.T.); +#206245 = VERTEX_POINT('',#206246); +#206246 = CARTESIAN_POINT('',(132.044597,-77.214285,1.585)); +#206247 = CIRCLE('',#206248,6.500000000091E-02); +#206248 = AXIS2_PLACEMENT_3D('',#206249,#206250,#206251); +#206249 = CARTESIAN_POINT('',(132.109597,-77.21428465513,1.585)); +#206250 = DIRECTION('',(-0.,0.,-1.)); +#206251 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#206252 = ORIENTED_EDGE('',*,*,#206253,.T.); +#206253 = EDGE_CURVE('',#206245,#206254,#206256,.T.); +#206254 = VERTEX_POINT('',#206255); +#206255 = CARTESIAN_POINT('',(132.044597,-76.7,1.585)); +#206256 = LINE('',#206257,#206258); +#206257 = CARTESIAN_POINT('',(132.044597,-77.214285,1.585)); +#206258 = VECTOR('',#206259,1.); +#206259 = DIRECTION('',(0.,1.,0.)); +#206260 = ORIENTED_EDGE('',*,*,#206261,.T.); +#206261 = EDGE_CURVE('',#206254,#206193,#206262,.T.); +#206262 = LINE('',#206263,#206264); +#206263 = CARTESIAN_POINT('',(132.044597,-76.7,1.585)); +#206264 = VECTOR('',#206265,1.); +#206265 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#206266 = PLANE('',#206267); +#206267 = AXIS2_PLACEMENT_3D('',#206268,#206269,#206270); +#206268 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206269 = DIRECTION('',(0.,0.,1.)); +#206270 = DIRECTION('',(1.,0.,-0.)); +#206271 = SHELL_BASED_SURFACE_MODEL('',(#206272)); +#206272 = OPEN_SHELL('',(#206273)); +#206273 = ADVANCED_FACE('',(#206274),#206351,.T.); +#206274 = FACE_BOUND('',#206275,.F.); +#206275 = EDGE_LOOP('',(#206276,#206287,#206295,#206304,#206312,#206321, + #206329,#206337,#206345)); +#206276 = ORIENTED_EDGE('',*,*,#206277,.T.); +#206277 = EDGE_CURVE('',#206278,#206280,#206282,.T.); +#206278 = VERTEX_POINT('',#206279); +#206279 = CARTESIAN_POINT('',(154.894761,-76.604606,1.585)); +#206280 = VERTEX_POINT('',#206281); +#206281 = CARTESIAN_POINT('',(154.980152,-76.538335,1.585)); +#206282 = CIRCLE('',#206283,6.499990070439E-02); +#206283 = AXIS2_PLACEMENT_3D('',#206284,#206285,#206286); +#206284 = CARTESIAN_POINT('',(154.95959745813,-76.59999939734,1.585)); +#206285 = DIRECTION('',(0.,0.,-1.)); +#206286 = DIRECTION('',(-0.997485495103,-7.08709182902E-02,-0.)); +#206287 = ORIENTED_EDGE('',*,*,#206288,.T.); +#206288 = EDGE_CURVE('',#206280,#206289,#206291,.T.); +#206289 = VERTEX_POINT('',#206290); +#206290 = CARTESIAN_POINT('',(155.880152,-76.838334,1.585)); +#206291 = LINE('',#206292,#206293); +#206292 = CARTESIAN_POINT('',(154.980152,-76.538335,1.585)); +#206293 = VECTOR('',#206294,1.); +#206294 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#206295 = ORIENTED_EDGE('',*,*,#206296,.T.); +#206296 = EDGE_CURVE('',#206289,#206297,#206299,.T.); +#206297 = VERTEX_POINT('',#206298); +#206298 = CARTESIAN_POINT('',(155.880152,-76.961664,1.585)); +#206299 = CIRCLE('',#206300,6.500111611218E-02); +#206300 = AXIS2_PLACEMENT_3D('',#206301,#206302,#206303); +#206301 = CARTESIAN_POINT('',(155.85959542268,-76.899999,1.585)); +#206302 = DIRECTION('',(0.,0.,-1.)); +#206303 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#206304 = ORIENTED_EDGE('',*,*,#206305,.T.); +#206305 = EDGE_CURVE('',#206297,#206306,#206308,.T.); +#206306 = VERTEX_POINT('',#206307); +#206307 = CARTESIAN_POINT('',(154.980152,-77.261663,1.585)); +#206308 = LINE('',#206309,#206310); +#206309 = CARTESIAN_POINT('',(155.880152,-76.961664,1.585)); +#206310 = VECTOR('',#206311,1.); +#206311 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#206312 = ORIENTED_EDGE('',*,*,#206313,.T.); +#206313 = EDGE_CURVE('',#206306,#206314,#206316,.T.); +#206314 = VERTEX_POINT('',#206315); +#206315 = CARTESIAN_POINT('',(154.939042,-77.138335,1.585)); +#206316 = CIRCLE('',#206317,6.499966862238E-02); +#206317 = AXIS2_PLACEMENT_3D('',#206318,#206319,#206320); +#206318 = CARTESIAN_POINT('',(154.95959712923,-77.19999895692,1.585)); +#206319 = DIRECTION('',(0.,0.,-1.)); +#206320 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#206321 = ORIENTED_EDGE('',*,*,#206322,.T.); +#206322 = EDGE_CURVE('',#206314,#206323,#206325,.T.); +#206323 = VERTEX_POINT('',#206324); +#206324 = CARTESIAN_POINT('',(155.65405,-76.899999,1.585)); +#206325 = LINE('',#206326,#206327); +#206326 = CARTESIAN_POINT('',(154.939042,-77.138335,1.585)); +#206327 = VECTOR('',#206328,1.); +#206328 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#206329 = ORIENTED_EDGE('',*,*,#206330,.T.); +#206330 = EDGE_CURVE('',#206323,#206331,#206333,.T.); +#206331 = VERTEX_POINT('',#206332); +#206332 = CARTESIAN_POINT('',(154.939042,-76.661663,1.585)); +#206333 = LINE('',#206334,#206335); +#206334 = CARTESIAN_POINT('',(155.65405,-76.899999,1.585)); +#206335 = VECTOR('',#206336,1.); +#206336 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#206337 = ORIENTED_EDGE('',*,*,#206338,.T.); +#206338 = EDGE_CURVE('',#206331,#206339,#206341,.T.); +#206339 = VERTEX_POINT('',#206340); +#206340 = CARTESIAN_POINT('',(154.917009,-76.649103,1.585)); +#206341 = LINE('',#206342,#206343); +#206342 = CARTESIAN_POINT('',(154.939042,-76.661663,1.585)); +#206343 = VECTOR('',#206344,1.); +#206344 = DIRECTION('',(-0.868757082858,0.495238458708,0.)); +#206345 = ORIENTED_EDGE('',*,*,#206346,.T.); +#206346 = EDGE_CURVE('',#206339,#206278,#206347,.T.); +#206347 = LINE('',#206348,#206349); +#206348 = CARTESIAN_POINT('',(154.917009,-76.649103,1.585)); +#206349 = VECTOR('',#206350,1.); +#206350 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#206351 = PLANE('',#206352); +#206352 = AXIS2_PLACEMENT_3D('',#206353,#206354,#206355); +#206353 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206354 = DIRECTION('',(0.,0.,1.)); +#206355 = DIRECTION('',(1.,0.,-0.)); +#206356 = SHELL_BASED_SURFACE_MODEL('',(#206357)); +#206357 = OPEN_SHELL('',(#206358)); +#206358 = ADVANCED_FACE('',(#206359),#206452,.T.); +#206359 = FACE_BOUND('',#206360,.F.); +#206360 = EDGE_LOOP('',(#206361,#206372,#206380,#206388,#206397,#206405, + #206413,#206422,#206430,#206438,#206446)); +#206361 = ORIENTED_EDGE('',*,*,#206362,.T.); +#206362 = EDGE_CURVE('',#206363,#206365,#206367,.T.); +#206363 = VERTEX_POINT('',#206364); +#206364 = CARTESIAN_POINT('',(137.115579,-76.588744,1.585)); +#206365 = VERTEX_POINT('',#206366); +#206366 = CARTESIAN_POINT('',(137.214494,-76.545161,1.585)); +#206367 = CIRCLE('',#206368,6.500030228282E-02); +#206368 = AXIS2_PLACEMENT_3D('',#206369,#206370,#206371); +#206369 = CARTESIAN_POINT('',(137.17959737432,-76.59999953401,1.585)); +#206370 = DIRECTION('',(0.,0.,-1.)); +#206371 = DIRECTION('',(-0.984893486242,0.173161256516,0.)); +#206372 = ORIENTED_EDGE('',*,*,#206373,.T.); +#206373 = EDGE_CURVE('',#206365,#206374,#206376,.T.); +#206374 = VERTEX_POINT('',#206375); +#206375 = CARTESIAN_POINT('',(137.669953,-76.834999,1.585)); +#206376 = LINE('',#206377,#206378); +#206377 = CARTESIAN_POINT('',(137.214494,-76.545161,1.585)); +#206378 = VECTOR('',#206379,1.); +#206379 = DIRECTION('',(0.843661106369,-0.536876091477,0.)); +#206380 = ORIENTED_EDGE('',*,*,#206381,.T.); +#206381 = EDGE_CURVE('',#206374,#206382,#206384,.T.); +#206382 = VERTEX_POINT('',#206383); +#206383 = CARTESIAN_POINT('',(138.079597,-76.834999,1.585)); +#206384 = LINE('',#206385,#206386); +#206385 = CARTESIAN_POINT('',(137.669953,-76.834999,1.585)); +#206386 = VECTOR('',#206387,1.); +#206387 = DIRECTION('',(1.,0.,0.)); +#206388 = ORIENTED_EDGE('',*,*,#206389,.T.); +#206389 = EDGE_CURVE('',#206382,#206390,#206392,.T.); +#206390 = VERTEX_POINT('',#206391); +#206391 = CARTESIAN_POINT('',(138.079597,-76.964999,1.585)); +#206392 = CIRCLE('',#206393,6.500000000092E-02); +#206393 = AXIS2_PLACEMENT_3D('',#206394,#206395,#206396); +#206394 = CARTESIAN_POINT('',(138.07959665513,-76.899999,1.585)); +#206395 = DIRECTION('',(0.,0.,-1.)); +#206396 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#206397 = ORIENTED_EDGE('',*,*,#206398,.T.); +#206398 = EDGE_CURVE('',#206390,#206399,#206401,.T.); +#206399 = VERTEX_POINT('',#206400); +#206400 = CARTESIAN_POINT('',(137.669953,-76.964999,1.585)); +#206401 = LINE('',#206402,#206403); +#206402 = CARTESIAN_POINT('',(138.079597,-76.964999,1.585)); +#206403 = VECTOR('',#206404,1.); +#206404 = DIRECTION('',(-1.,0.,0.)); +#206405 = ORIENTED_EDGE('',*,*,#206406,.T.); +#206406 = EDGE_CURVE('',#206399,#206407,#206409,.T.); +#206407 = VERTEX_POINT('',#206408); +#206408 = CARTESIAN_POINT('',(137.214494,-77.254837,1.585)); +#206409 = LINE('',#206410,#206411); +#206410 = CARTESIAN_POINT('',(137.669953,-76.964999,1.585)); +#206411 = VECTOR('',#206412,1.); +#206412 = DIRECTION('',(-0.84366110637,-0.536876091477,0.)); +#206413 = ORIENTED_EDGE('',*,*,#206414,.T.); +#206414 = EDGE_CURVE('',#206407,#206415,#206417,.T.); +#206415 = VERTEX_POINT('',#206416); +#206416 = CARTESIAN_POINT('',(137.1447,-77.145161,1.585)); +#206417 = CIRCLE('',#206418,6.500005271614E-02); +#206418 = AXIS2_PLACEMENT_3D('',#206419,#206420,#206421); +#206419 = CARTESIAN_POINT('',(137.179597269,-77.19999882881,1.585)); +#206420 = DIRECTION('',(0.,0.,-1.)); +#206421 = DIRECTION('',(0.536872349088,-0.843663487882,0.)); +#206422 = ORIENTED_EDGE('',*,*,#206423,.T.); +#206423 = EDGE_CURVE('',#206415,#206424,#206426,.T.); +#206424 = VERTEX_POINT('',#206425); +#206425 = CARTESIAN_POINT('',(137.529954,-76.899999,1.585)); +#206426 = LINE('',#206427,#206428); +#206427 = CARTESIAN_POINT('',(137.1447,-77.145161,1.585)); +#206428 = VECTOR('',#206429,1.); +#206429 = DIRECTION('',(0.843661127045,0.536876058986,0.)); +#206430 = ORIENTED_EDGE('',*,*,#206431,.T.); +#206431 = EDGE_CURVE('',#206424,#206432,#206434,.T.); +#206432 = VERTEX_POINT('',#206433); +#206433 = CARTESIAN_POINT('',(137.1447,-76.654837,1.585)); +#206434 = LINE('',#206435,#206436); +#206435 = CARTESIAN_POINT('',(137.529954,-76.899999,1.585)); +#206436 = VECTOR('',#206437,1.); +#206437 = DIRECTION('',(-0.843661127045,0.536876058986,0.)); +#206438 = ORIENTED_EDGE('',*,*,#206439,.T.); +#206439 = EDGE_CURVE('',#206432,#206440,#206442,.T.); +#206440 = VERTEX_POINT('',#206441); +#206441 = CARTESIAN_POINT('',(137.126371,-76.637308,1.585)); +#206442 = LINE('',#206443,#206444); +#206443 = CARTESIAN_POINT('',(137.1447,-76.654837,1.585)); +#206444 = VECTOR('',#206445,1.); +#206445 = DIRECTION('',(-0.722702652796,0.691159081284,0.)); +#206446 = ORIENTED_EDGE('',*,*,#206447,.T.); +#206447 = EDGE_CURVE('',#206440,#206363,#206448,.T.); +#206448 = LINE('',#206449,#206450); +#206449 = CARTESIAN_POINT('',(137.126371,-76.637308,1.585)); +#206450 = VECTOR('',#206451,1.); +#206451 = DIRECTION('',(-0.216930457819,0.976187060184,0.)); +#206452 = PLANE('',#206453); +#206453 = AXIS2_PLACEMENT_3D('',#206454,#206455,#206456); +#206454 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206455 = DIRECTION('',(0.,0.,1.)); +#206456 = DIRECTION('',(1.,0.,-0.)); +#206457 = SHELL_BASED_SURFACE_MODEL('',(#206458)); +#206458 = OPEN_SHELL('',(#206459)); +#206459 = ADVANCED_FACE('',(#206460,#206594),#206653,.T.); +#206460 = FACE_BOUND('',#206461,.F.); +#206461 = EDGE_LOOP('',(#206462,#206473,#206481,#206489,#206497,#206505, + #206513,#206522,#206530,#206538,#206546,#206555,#206563,#206572, + #206580,#206588)); +#206462 = ORIENTED_EDGE('',*,*,#206463,.T.); +#206463 = EDGE_CURVE('',#206464,#206466,#206468,.T.); +#206464 = VERTEX_POINT('',#206465); +#206465 = CARTESIAN_POINT('',(121.958013,-76.662533,1.585)); +#206466 = VERTEX_POINT('',#206467); +#206467 = CARTESIAN_POINT('',(122.238666,-76.61329,1.585)); +#206468 = CIRCLE('',#206469,0.327183487819); +#206469 = AXIS2_PLACEMENT_3D('',#206470,#206471,#206472); +#206470 = CARTESIAN_POINT('',(122.14924076591,-76.92801553472,1.585)); +#206471 = DIRECTION('',(0.,0.,-1.)); +#206472 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#206473 = ORIENTED_EDGE('',*,*,#206474,.T.); +#206474 = EDGE_CURVE('',#206466,#206475,#206477,.T.); +#206475 = VERTEX_POINT('',#206476); +#206476 = CARTESIAN_POINT('',(122.341273,-76.668323,1.585)); +#206477 = LINE('',#206478,#206479); +#206478 = CARTESIAN_POINT('',(122.238666,-76.61329,1.585)); +#206479 = VECTOR('',#206480,1.); +#206480 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#206481 = ORIENTED_EDGE('',*,*,#206482,.T.); +#206482 = EDGE_CURVE('',#206475,#206483,#206485,.T.); +#206483 = VERTEX_POINT('',#206484); +#206484 = CARTESIAN_POINT('',(122.396306,-76.728073,1.585)); +#206485 = LINE('',#206486,#206487); +#206486 = CARTESIAN_POINT('',(122.341273,-76.668323,1.585)); +#206487 = VECTOR('',#206488,1.); +#206488 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#206489 = ORIENTED_EDGE('',*,*,#206490,.T.); +#206490 = EDGE_CURVE('',#206483,#206491,#206493,.T.); +#206491 = VERTEX_POINT('',#206492); +#206492 = CARTESIAN_POINT('',(122.443109,-76.8282,1.585)); +#206493 = LINE('',#206494,#206495); +#206494 = CARTESIAN_POINT('',(122.396306,-76.728073,1.585)); +#206495 = VECTOR('',#206496,1.); +#206496 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#206497 = ORIENTED_EDGE('',*,*,#206498,.T.); +#206498 = EDGE_CURVE('',#206491,#206499,#206501,.T.); +#206499 = VERTEX_POINT('',#206500); +#206500 = CARTESIAN_POINT('',(122.446025,-76.846585,1.585)); +#206501 = LINE('',#206502,#206503); +#206502 = CARTESIAN_POINT('',(122.443109,-76.8282,1.585)); +#206503 = VECTOR('',#206504,1.); +#206504 = DIRECTION('',(0.156649434209,-0.987654268842,0.)); +#206505 = ORIENTED_EDGE('',*,*,#206506,.T.); +#206506 = EDGE_CURVE('',#206499,#206507,#206509,.T.); +#206507 = VERTEX_POINT('',#206508); +#206508 = CARTESIAN_POINT('',(122.772322,-76.618178,1.585)); +#206509 = LINE('',#206510,#206511); +#206510 = CARTESIAN_POINT('',(122.446025,-76.846585,1.585)); +#206511 = VECTOR('',#206512,1.); +#206512 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#206513 = ORIENTED_EDGE('',*,*,#206514,.T.); +#206514 = EDGE_CURVE('',#206507,#206515,#206517,.T.); +#206515 = VERTEX_POINT('',#206516); +#206516 = CARTESIAN_POINT('',(122.846872,-76.724678,1.585)); +#206517 = CIRCLE('',#206518,6.499990865384E-02); +#206518 = AXIS2_PLACEMENT_3D('',#206519,#206520,#206521); +#206519 = CARTESIAN_POINT('',(122.80959707222,-76.67142794944,1.585)); +#206520 = DIRECTION('',(0.,0.,-1.)); +#206521 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#206522 = ORIENTED_EDGE('',*,*,#206523,.T.); +#206523 = EDGE_CURVE('',#206515,#206524,#206526,.T.); +#206524 = VERTEX_POINT('',#206525); +#206525 = CARTESIAN_POINT('',(122.446025,-77.00527,1.585)); +#206526 = LINE('',#206527,#206528); +#206527 = CARTESIAN_POINT('',(122.846872,-76.724678,1.585)); +#206528 = VECTOR('',#206529,1.); +#206529 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#206530 = ORIENTED_EDGE('',*,*,#206531,.T.); +#206531 = EDGE_CURVE('',#206524,#206532,#206534,.T.); +#206532 = VERTEX_POINT('',#206533); +#206533 = CARTESIAN_POINT('',(122.446025,-77.120714,1.585)); +#206534 = LINE('',#206535,#206536); +#206535 = CARTESIAN_POINT('',(122.446025,-77.00527,1.585)); +#206536 = VECTOR('',#206537,1.); +#206537 = DIRECTION('',(0.,-1.,0.)); +#206538 = ORIENTED_EDGE('',*,*,#206539,.T.); +#206539 = EDGE_CURVE('',#206532,#206540,#206542,.T.); +#206540 = VERTEX_POINT('',#206541); +#206541 = CARTESIAN_POINT('',(122.809597,-77.120714,1.585)); +#206542 = LINE('',#206543,#206544); +#206543 = CARTESIAN_POINT('',(122.446025,-77.120714,1.585)); +#206544 = VECTOR('',#206545,1.); +#206545 = DIRECTION('',(1.,0.,0.)); +#206546 = ORIENTED_EDGE('',*,*,#206547,.T.); +#206547 = EDGE_CURVE('',#206540,#206548,#206550,.T.); +#206548 = VERTEX_POINT('',#206549); +#206549 = CARTESIAN_POINT('',(122.809597,-77.250714,1.585)); +#206550 = CIRCLE('',#206551,6.500000000092E-02); +#206551 = AXIS2_PLACEMENT_3D('',#206552,#206553,#206554); +#206552 = CARTESIAN_POINT('',(122.80959665513,-77.185714,1.585)); +#206553 = DIRECTION('',(0.,0.,-1.)); +#206554 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#206555 = ORIENTED_EDGE('',*,*,#206556,.T.); +#206556 = EDGE_CURVE('',#206548,#206557,#206559,.T.); +#206557 = VERTEX_POINT('',#206558); +#206558 = CARTESIAN_POINT('',(121.909597,-77.250714,1.585)); +#206559 = LINE('',#206560,#206561); +#206560 = CARTESIAN_POINT('',(122.809597,-77.250714,1.585)); +#206561 = VECTOR('',#206562,1.); +#206562 = DIRECTION('',(-1.,0.,0.)); +#206563 = ORIENTED_EDGE('',*,*,#206564,.T.); +#206564 = EDGE_CURVE('',#206557,#206565,#206567,.T.); +#206565 = VERTEX_POINT('',#206566); +#206566 = CARTESIAN_POINT('',(121.844597,-77.185714,1.585)); +#206567 = CIRCLE('',#206568,6.500103935388E-02); +#206568 = AXIS2_PLACEMENT_3D('',#206569,#206570,#206571); +#206569 = CARTESIAN_POINT('',(121.90959803934,-77.18571296065,1.585)); +#206570 = DIRECTION('',(0.,0.,-1.)); +#206571 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#206572 = ORIENTED_EDGE('',*,*,#206573,.T.); +#206573 = EDGE_CURVE('',#206565,#206574,#206576,.T.); +#206574 = VERTEX_POINT('',#206575); +#206575 = CARTESIAN_POINT('',(121.847512,-76.8282,1.585)); +#206576 = LINE('',#206577,#206578); +#206577 = CARTESIAN_POINT('',(121.844597,-77.185714,1.585)); +#206578 = VECTOR('',#206579,1.); +#206579 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#206580 = ORIENTED_EDGE('',*,*,#206581,.T.); +#206581 = EDGE_CURVE('',#206574,#206582,#206584,.T.); +#206582 = VERTEX_POINT('',#206583); +#206583 = CARTESIAN_POINT('',(121.900702,-76.719844,1.585)); +#206584 = LINE('',#206585,#206586); +#206585 = CARTESIAN_POINT('',(121.847512,-76.8282,1.585)); +#206586 = VECTOR('',#206587,1.); +#206587 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#206588 = ORIENTED_EDGE('',*,*,#206589,.T.); +#206589 = EDGE_CURVE('',#206582,#206464,#206590,.T.); +#206590 = LINE('',#206591,#206592); +#206591 = CARTESIAN_POINT('',(121.900702,-76.719844,1.585)); +#206592 = VECTOR('',#206593,1.); +#206593 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206594 = FACE_BOUND('',#206595,.F.); +#206595 = EDGE_LOOP('',(#206596,#206607,#206615,#206623,#206631,#206639, + #206647)); +#206596 = ORIENTED_EDGE('',*,*,#206597,.T.); +#206597 = EDGE_CURVE('',#206598,#206600,#206602,.T.); +#206598 = VERTEX_POINT('',#206599); +#206599 = CARTESIAN_POINT('',(122.256808,-76.767706,1.585)); +#206600 = VERTEX_POINT('',#206601); +#206601 = CARTESIAN_POINT('',(122.005875,-76.795644,1.585)); +#206602 = CIRCLE('',#206603,0.180979134862); +#206603 = AXIS2_PLACEMENT_3D('',#206604,#206605,#206606); +#206604 = CARTESIAN_POINT('',(122.14569076987,-76.91055700078,1.585)); +#206605 = DIRECTION('',(0.,0.,1.)); +#206606 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#206607 = ORIENTED_EDGE('',*,*,#206608,.T.); +#206608 = EDGE_CURVE('',#206600,#206609,#206611,.T.); +#206609 = VERTEX_POINT('',#206610); +#206610 = CARTESIAN_POINT('',(121.974597,-76.858201,1.585)); +#206611 = LINE('',#206612,#206613); +#206612 = CARTESIAN_POINT('',(122.005875,-76.795644,1.585)); +#206613 = VECTOR('',#206614,1.); +#206614 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#206615 = ORIENTED_EDGE('',*,*,#206616,.T.); +#206616 = EDGE_CURVE('',#206609,#206617,#206619,.T.); +#206617 = VERTEX_POINT('',#206618); +#206618 = CARTESIAN_POINT('',(121.974597,-77.120714,1.585)); +#206619 = LINE('',#206620,#206621); +#206620 = CARTESIAN_POINT('',(121.974597,-76.858201,1.585)); +#206621 = VECTOR('',#206622,1.); +#206622 = DIRECTION('',(0.,-1.,0.)); +#206623 = ORIENTED_EDGE('',*,*,#206624,.T.); +#206624 = EDGE_CURVE('',#206617,#206625,#206627,.T.); +#206625 = VERTEX_POINT('',#206626); +#206626 = CARTESIAN_POINT('',(122.316025,-77.120714,1.585)); +#206627 = LINE('',#206628,#206629); +#206628 = CARTESIAN_POINT('',(121.974597,-77.120714,1.585)); +#206629 = VECTOR('',#206630,1.); +#206630 = DIRECTION('',(1.,0.,0.)); +#206631 = ORIENTED_EDGE('',*,*,#206632,.T.); +#206632 = EDGE_CURVE('',#206625,#206633,#206635,.T.); +#206633 = VERTEX_POINT('',#206634); +#206634 = CARTESIAN_POINT('',(122.316025,-76.858201,1.585)); +#206635 = LINE('',#206636,#206637); +#206636 = CARTESIAN_POINT('',(122.316025,-77.120714,1.585)); +#206637 = VECTOR('',#206638,1.); +#206638 = DIRECTION('',(0.,1.,0.)); +#206639 = ORIENTED_EDGE('',*,*,#206640,.T.); +#206640 = EDGE_CURVE('',#206633,#206641,#206643,.T.); +#206641 = VERTEX_POINT('',#206642); +#206642 = CARTESIAN_POINT('',(122.284746,-76.795644,1.585)); +#206643 = LINE('',#206644,#206645); +#206644 = CARTESIAN_POINT('',(122.316025,-76.858201,1.585)); +#206645 = VECTOR('',#206646,1.); +#206646 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#206647 = ORIENTED_EDGE('',*,*,#206648,.T.); +#206648 = EDGE_CURVE('',#206641,#206598,#206649,.T.); +#206649 = LINE('',#206650,#206651); +#206650 = CARTESIAN_POINT('',(122.284746,-76.795644,1.585)); +#206651 = VECTOR('',#206652,1.); +#206652 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206653 = PLANE('',#206654); +#206654 = AXIS2_PLACEMENT_3D('',#206655,#206656,#206657); +#206655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206656 = DIRECTION('',(0.,0.,1.)); +#206657 = DIRECTION('',(1.,0.,-0.)); +#206658 = SHELL_BASED_SURFACE_MODEL('',(#206659)); +#206659 = OPEN_SHELL('',(#206660)); +#206660 = ADVANCED_FACE('',(#206661),#206763,.T.); +#206661 = FACE_BOUND('',#206662,.F.); +#206662 = EDGE_LOOP('',(#206663,#206673,#206682,#206690,#206698,#206707, + #206715,#206723,#206732,#206740,#206748,#206757)); +#206663 = ORIENTED_EDGE('',*,*,#206664,.T.); +#206664 = EDGE_CURVE('',#206665,#206667,#206669,.T.); +#206665 = VERTEX_POINT('',#206666); +#206666 = CARTESIAN_POINT('',(128.909596,-76.793307,1.585)); +#206667 = VERTEX_POINT('',#206668); +#206668 = CARTESIAN_POINT('',(129.323541,-76.517345,1.585)); +#206669 = LINE('',#206670,#206671); +#206670 = CARTESIAN_POINT('',(128.909596,-76.793307,1.585)); +#206671 = VECTOR('',#206672,1.); +#206672 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#206673 = ORIENTED_EDGE('',*,*,#206674,.T.); +#206674 = EDGE_CURVE('',#206667,#206675,#206677,.T.); +#206675 = VERTEX_POINT('',#206676); +#206676 = CARTESIAN_POINT('',(129.395652,-76.625511,1.585)); +#206677 = CIRCLE('',#206678,6.499976899535E-02); +#206678 = AXIS2_PLACEMENT_3D('',#206679,#206680,#206681); +#206679 = CARTESIAN_POINT('',(129.35959612917,-76.57142824722,1.585)); +#206680 = DIRECTION('',(0.,0.,-1.)); +#206681 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#206682 = ORIENTED_EDGE('',*,*,#206683,.T.); +#206683 = EDGE_CURVE('',#206675,#206684,#206686,.T.); +#206684 = VERTEX_POINT('',#206685); +#206685 = CARTESIAN_POINT('',(129.026776,-76.871428,1.585)); +#206686 = LINE('',#206687,#206688); +#206687 = CARTESIAN_POINT('',(129.395652,-76.625511,1.585)); +#206688 = VECTOR('',#206689,1.); +#206689 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#206690 = ORIENTED_EDGE('',*,*,#206691,.T.); +#206691 = EDGE_CURVE('',#206684,#206692,#206694,.T.); +#206692 = VERTEX_POINT('',#206693); +#206693 = CARTESIAN_POINT('',(129.395652,-77.117345,1.585)); +#206694 = LINE('',#206695,#206696); +#206695 = CARTESIAN_POINT('',(129.026776,-76.871428,1.585)); +#206696 = VECTOR('',#206697,1.); +#206697 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#206698 = ORIENTED_EDGE('',*,*,#206699,.T.); +#206699 = EDGE_CURVE('',#206692,#206700,#206702,.T.); +#206700 = VERTEX_POINT('',#206701); +#206701 = CARTESIAN_POINT('',(129.323541,-77.225511,1.585)); +#206702 = CIRCLE('',#206703,6.499976899541E-02); +#206703 = AXIS2_PLACEMENT_3D('',#206704,#206705,#206706); +#206704 = CARTESIAN_POINT('',(129.35959687747,-77.17142825164,1.585)); +#206705 = DIRECTION('',(0.,0.,-1.)); +#206706 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#206707 = ORIENTED_EDGE('',*,*,#206708,.T.); +#206708 = EDGE_CURVE('',#206700,#206709,#206711,.T.); +#206709 = VERTEX_POINT('',#206710); +#206710 = CARTESIAN_POINT('',(128.909596,-76.949548,1.585)); +#206711 = LINE('',#206712,#206713); +#206712 = CARTESIAN_POINT('',(129.323541,-77.225511,1.585)); +#206713 = VECTOR('',#206714,1.); +#206714 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#206715 = ORIENTED_EDGE('',*,*,#206716,.T.); +#206716 = EDGE_CURVE('',#206709,#206717,#206719,.T.); +#206717 = VERTEX_POINT('',#206718); +#206718 = CARTESIAN_POINT('',(128.495653,-77.225511,1.585)); +#206719 = LINE('',#206720,#206721); +#206720 = CARTESIAN_POINT('',(128.909596,-76.949548,1.585)); +#206721 = VECTOR('',#206722,1.); +#206722 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#206723 = ORIENTED_EDGE('',*,*,#206724,.T.); +#206724 = EDGE_CURVE('',#206717,#206725,#206727,.T.); +#206725 = VERTEX_POINT('',#206726); +#206726 = CARTESIAN_POINT('',(128.423541,-77.117345,1.585)); +#206727 = CIRCLE('',#206728,6.500004634766E-02); +#206728 = AXIS2_PLACEMENT_3D('',#206729,#206730,#206731); +#206729 = CARTESIAN_POINT('',(128.45959737004,-77.1714277533,1.585)); +#206730 = DIRECTION('',(0.,0.,-1.)); +#206731 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#206732 = ORIENTED_EDGE('',*,*,#206733,.T.); +#206733 = EDGE_CURVE('',#206725,#206734,#206736,.T.); +#206734 = VERTEX_POINT('',#206735); +#206735 = CARTESIAN_POINT('',(128.792416,-76.871428,1.585)); +#206736 = LINE('',#206737,#206738); +#206737 = CARTESIAN_POINT('',(128.423541,-77.117345,1.585)); +#206738 = VECTOR('',#206739,1.); +#206739 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#206740 = ORIENTED_EDGE('',*,*,#206741,.T.); +#206741 = EDGE_CURVE('',#206734,#206742,#206744,.T.); +#206742 = VERTEX_POINT('',#206743); +#206743 = CARTESIAN_POINT('',(128.423541,-76.625511,1.585)); +#206744 = LINE('',#206745,#206746); +#206745 = CARTESIAN_POINT('',(128.792416,-76.871428,1.585)); +#206746 = VECTOR('',#206747,1.); +#206747 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#206748 = ORIENTED_EDGE('',*,*,#206749,.T.); +#206749 = EDGE_CURVE('',#206742,#206750,#206752,.T.); +#206750 = VERTEX_POINT('',#206751); +#206751 = CARTESIAN_POINT('',(128.495653,-76.517345,1.585)); +#206752 = CIRCLE('',#206753,6.500004634723E-02); +#206753 = AXIS2_PLACEMENT_3D('',#206754,#206755,#206756); +#206754 = CARTESIAN_POINT('',(128.45959731405,-76.57142820937,1.585)); +#206755 = DIRECTION('',(0.,0.,-1.)); +#206756 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#206757 = ORIENTED_EDGE('',*,*,#206758,.T.); +#206758 = EDGE_CURVE('',#206750,#206665,#206759,.T.); +#206759 = LINE('',#206760,#206761); +#206760 = CARTESIAN_POINT('',(128.495653,-76.517345,1.585)); +#206761 = VECTOR('',#206762,1.); +#206762 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#206763 = PLANE('',#206764); +#206764 = AXIS2_PLACEMENT_3D('',#206765,#206766,#206767); +#206765 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206766 = DIRECTION('',(0.,0.,1.)); +#206767 = DIRECTION('',(1.,0.,-0.)); +#206768 = SHELL_BASED_SURFACE_MODEL('',(#206769)); +#206769 = OPEN_SHELL('',(#206770)); +#206770 = ADVANCED_FACE('',(#206771),#206857,.T.); +#206771 = FACE_BOUND('',#206772,.F.); +#206772 = EDGE_LOOP('',(#206773,#206784,#206792,#206801,#206809,#206817, + #206826,#206834,#206843,#206851)); +#206773 = ORIENTED_EDGE('',*,*,#206774,.T.); +#206774 = EDGE_CURVE('',#206775,#206777,#206779,.T.); +#206775 = VERTEX_POINT('',#206776); +#206776 = CARTESIAN_POINT('',(152.419597,-76.707856,1.585)); +#206777 = VERTEX_POINT('',#206778); +#206778 = CARTESIAN_POINT('',(152.419597,-76.577856,1.585)); +#206779 = CIRCLE('',#206780,6.500000000091E-02); +#206780 = AXIS2_PLACEMENT_3D('',#206781,#206782,#206783); +#206781 = CARTESIAN_POINT('',(152.41959734486,-76.642856,1.585)); +#206782 = DIRECTION('',(0.,0.,-1.)); +#206783 = DIRECTION('',(-5.30565758841E-06,-0.999999999986,-0.)); +#206784 = ORIENTED_EDGE('',*,*,#206785,.T.); +#206785 = EDGE_CURVE('',#206777,#206786,#206788,.T.); +#206786 = VERTEX_POINT('',#206787); +#206787 = CARTESIAN_POINT('',(153.319597,-76.577856,1.585)); +#206788 = LINE('',#206789,#206790); +#206789 = CARTESIAN_POINT('',(152.419597,-76.577856,1.585)); +#206790 = VECTOR('',#206791,1.); +#206791 = DIRECTION('',(1.,0.,0.)); +#206792 = ORIENTED_EDGE('',*,*,#206793,.T.); +#206793 = EDGE_CURVE('',#206786,#206794,#206796,.T.); +#206794 = VERTEX_POINT('',#206795); +#206795 = CARTESIAN_POINT('',(153.351846,-76.699292,1.585)); +#206796 = CIRCLE('',#206797,6.500021194141E-02); +#206797 = AXIS2_PLACEMENT_3D('',#206798,#206799,#206800); +#206798 = CARTESIAN_POINT('',(153.31959651351,-76.64285621194,1.585)); +#206799 = DIRECTION('',(0.,0.,-1.)); +#206800 = DIRECTION('',(7.484332115463E-06,0.999999999972,0.)); +#206801 = ORIENTED_EDGE('',*,*,#206802,.T.); +#206802 = EDGE_CURVE('',#206794,#206803,#206805,.T.); +#206803 = VERTEX_POINT('',#206804); +#206804 = CARTESIAN_POINT('',(152.664359,-77.092142,1.585)); +#206805 = LINE('',#206806,#206807); +#206806 = CARTESIAN_POINT('',(153.351846,-76.699292,1.585)); +#206807 = VECTOR('',#206808,1.); +#206808 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#206809 = ORIENTED_EDGE('',*,*,#206810,.T.); +#206810 = EDGE_CURVE('',#206803,#206811,#206813,.T.); +#206811 = VERTEX_POINT('',#206812); +#206812 = CARTESIAN_POINT('',(153.319597,-77.092142,1.585)); +#206813 = LINE('',#206814,#206815); +#206814 = CARTESIAN_POINT('',(152.664359,-77.092142,1.585)); +#206815 = VECTOR('',#206816,1.); +#206816 = DIRECTION('',(1.,0.,0.)); +#206817 = ORIENTED_EDGE('',*,*,#206818,.T.); +#206818 = EDGE_CURVE('',#206811,#206819,#206821,.T.); +#206819 = VERTEX_POINT('',#206820); +#206820 = CARTESIAN_POINT('',(153.319597,-77.222142,1.585)); +#206821 = CIRCLE('',#206822,6.500000000092E-02); +#206822 = AXIS2_PLACEMENT_3D('',#206823,#206824,#206825); +#206823 = CARTESIAN_POINT('',(153.31959665513,-77.157142,1.585)); +#206824 = DIRECTION('',(0.,0.,-1.)); +#206825 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#206826 = ORIENTED_EDGE('',*,*,#206827,.T.); +#206827 = EDGE_CURVE('',#206819,#206828,#206830,.T.); +#206828 = VERTEX_POINT('',#206829); +#206829 = CARTESIAN_POINT('',(152.419597,-77.222142,1.585)); +#206830 = LINE('',#206831,#206832); +#206831 = CARTESIAN_POINT('',(153.319597,-77.222142,1.585)); +#206832 = VECTOR('',#206833,1.); +#206833 = DIRECTION('',(-1.,0.,0.)); +#206834 = ORIENTED_EDGE('',*,*,#206835,.T.); +#206835 = EDGE_CURVE('',#206828,#206836,#206838,.T.); +#206836 = VERTEX_POINT('',#206837); +#206837 = CARTESIAN_POINT('',(152.387348,-77.100706,1.585)); +#206838 = CIRCLE('',#206839,6.50002119414E-02); +#206839 = AXIS2_PLACEMENT_3D('',#206840,#206841,#206842); +#206840 = CARTESIAN_POINT('',(152.41959748648,-77.15714178806,1.585)); +#206841 = DIRECTION('',(0.,0.,-1.)); +#206842 = DIRECTION('',(-7.484331678207E-06,-0.999999999972,-0.)); +#206843 = ORIENTED_EDGE('',*,*,#206844,.T.); +#206844 = EDGE_CURVE('',#206836,#206845,#206847,.T.); +#206845 = VERTEX_POINT('',#206846); +#206846 = CARTESIAN_POINT('',(153.074835,-76.707856,1.585)); +#206847 = LINE('',#206848,#206849); +#206848 = CARTESIAN_POINT('',(152.387348,-77.100706,1.585)); +#206849 = VECTOR('',#206850,1.); +#206850 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#206851 = ORIENTED_EDGE('',*,*,#206852,.T.); +#206852 = EDGE_CURVE('',#206845,#206775,#206853,.T.); +#206853 = LINE('',#206854,#206855); +#206854 = CARTESIAN_POINT('',(153.074835,-76.707856,1.585)); +#206855 = VECTOR('',#206856,1.); +#206856 = DIRECTION('',(-1.,0.,0.)); +#206857 = PLANE('',#206858); +#206858 = AXIS2_PLACEMENT_3D('',#206859,#206860,#206861); +#206859 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206860 = DIRECTION('',(0.,0.,1.)); +#206861 = DIRECTION('',(1.,0.,-0.)); +#206862 = SHELL_BASED_SURFACE_MODEL('',(#206863)); +#206863 = OPEN_SHELL('',(#206864)); +#206864 = ADVANCED_FACE('',(#206865),#206992,.T.); +#206865 = FACE_BOUND('',#206866,.F.); +#206866 = EDGE_LOOP('',(#206867,#206878,#206886,#206894,#206902,#206911, + #206919,#206927,#206935,#206944,#206952,#206961,#206969,#206978, + #206986)); +#206867 = ORIENTED_EDGE('',*,*,#206868,.T.); +#206868 = EDGE_CURVE('',#206869,#206871,#206873,.T.); +#206869 = VERTEX_POINT('',#206870); +#206870 = CARTESIAN_POINT('',(116.899545,-76.689411,1.585)); +#206871 = VERTEX_POINT('',#206872); +#206872 = CARTESIAN_POINT('',(117.024597,-76.714285,1.585)); +#206873 = CIRCLE('',#206874,6.499988811648E-02); +#206874 = AXIS2_PLACEMENT_3D('',#206875,#206876,#206877); +#206875 = CARTESIAN_POINT('',(116.95959711188,-76.7142852701,1.585)); +#206876 = DIRECTION('',(0.,0.,-1.)); +#206877 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#206878 = ORIENTED_EDGE('',*,*,#206879,.T.); +#206879 = EDGE_CURVE('',#206871,#206880,#206882,.T.); +#206880 = VERTEX_POINT('',#206881); +#206881 = CARTESIAN_POINT('',(117.024597,-77.077857,1.585)); +#206882 = LINE('',#206883,#206884); +#206883 = CARTESIAN_POINT('',(117.024597,-76.714285,1.585)); +#206884 = VECTOR('',#206885,1.); +#206885 = DIRECTION('',(0.,-1.,0.)); +#206886 = ORIENTED_EDGE('',*,*,#206887,.T.); +#206887 = EDGE_CURVE('',#206880,#206888,#206890,.T.); +#206888 = VERTEX_POINT('',#206889); +#206889 = CARTESIAN_POINT('',(117.323168,-77.077857,1.585)); +#206890 = LINE('',#206891,#206892); +#206891 = CARTESIAN_POINT('',(117.024597,-77.077857,1.585)); +#206892 = VECTOR('',#206893,1.); +#206893 = DIRECTION('',(1.,0.,0.)); +#206894 = ORIENTED_EDGE('',*,*,#206895,.T.); +#206895 = EDGE_CURVE('',#206888,#206896,#206898,.T.); +#206896 = VERTEX_POINT('',#206897); +#206897 = CARTESIAN_POINT('',(117.323168,-76.842857,1.585)); +#206898 = LINE('',#206899,#206900); +#206899 = CARTESIAN_POINT('',(117.323168,-77.077857,1.585)); +#206900 = VECTOR('',#206901,1.); +#206901 = DIRECTION('',(0.,1.,0.)); +#206902 = ORIENTED_EDGE('',*,*,#206903,.T.); +#206903 = EDGE_CURVE('',#206896,#206904,#206906,.T.); +#206904 = VERTEX_POINT('',#206905); +#206905 = CARTESIAN_POINT('',(117.453168,-76.842857,1.585)); +#206906 = CIRCLE('',#206907,6.500000000092E-02); +#206907 = AXIS2_PLACEMENT_3D('',#206908,#206909,#206910); +#206908 = CARTESIAN_POINT('',(117.388168,-76.84285734486,1.585)); +#206909 = DIRECTION('',(0.,0.,-1.)); +#206910 = DIRECTION('',(-0.999999999986,5.305658025668E-06,0.)); +#206911 = ORIENTED_EDGE('',*,*,#206912,.T.); +#206912 = EDGE_CURVE('',#206904,#206913,#206915,.T.); +#206913 = VERTEX_POINT('',#206914); +#206914 = CARTESIAN_POINT('',(117.453168,-77.077857,1.585)); +#206915 = LINE('',#206916,#206917); +#206916 = CARTESIAN_POINT('',(117.453168,-76.842857,1.585)); +#206917 = VECTOR('',#206918,1.); +#206918 = DIRECTION('',(0.,-1.,0.)); +#206919 = ORIENTED_EDGE('',*,*,#206920,.T.); +#206920 = EDGE_CURVE('',#206913,#206921,#206923,.T.); +#206921 = VERTEX_POINT('',#206922); +#206922 = CARTESIAN_POINT('',(117.794597,-77.077857,1.585)); +#206923 = LINE('',#206924,#206925); +#206924 = CARTESIAN_POINT('',(117.453168,-77.077857,1.585)); +#206925 = VECTOR('',#206926,1.); +#206926 = DIRECTION('',(1.,0.,0.)); +#206927 = ORIENTED_EDGE('',*,*,#206928,.T.); +#206928 = EDGE_CURVE('',#206921,#206929,#206931,.T.); +#206929 = VERTEX_POINT('',#206930); +#206930 = CARTESIAN_POINT('',(117.794597,-76.714285,1.585)); +#206931 = LINE('',#206932,#206933); +#206932 = CARTESIAN_POINT('',(117.794597,-77.077857,1.585)); +#206933 = VECTOR('',#206934,1.); +#206934 = DIRECTION('',(0.,1.,0.)); +#206935 = ORIENTED_EDGE('',*,*,#206936,.T.); +#206936 = EDGE_CURVE('',#206929,#206937,#206939,.T.); +#206937 = VERTEX_POINT('',#206938); +#206938 = CARTESIAN_POINT('',(117.924597,-76.714285,1.585)); +#206939 = CIRCLE('',#206940,6.500000000092E-02); +#206940 = AXIS2_PLACEMENT_3D('',#206941,#206942,#206943); +#206941 = CARTESIAN_POINT('',(117.859597,-76.71428534486,1.585)); +#206942 = DIRECTION('',(0.,0.,-1.)); +#206943 = DIRECTION('',(-0.999999999986,5.305658025668E-06,0.)); +#206944 = ORIENTED_EDGE('',*,*,#206945,.T.); +#206945 = EDGE_CURVE('',#206937,#206946,#206948,.T.); +#206946 = VERTEX_POINT('',#206947); +#206947 = CARTESIAN_POINT('',(117.924597,-77.142857,1.585)); +#206948 = LINE('',#206949,#206950); +#206949 = CARTESIAN_POINT('',(117.924597,-76.714285,1.585)); +#206950 = VECTOR('',#206951,1.); +#206951 = DIRECTION('',(0.,-1.,0.)); +#206952 = ORIENTED_EDGE('',*,*,#206953,.T.); +#206953 = EDGE_CURVE('',#206946,#206954,#206956,.T.); +#206954 = VERTEX_POINT('',#206955); +#206955 = CARTESIAN_POINT('',(117.859597,-77.207857,1.585)); +#206956 = CIRCLE('',#206957,6.500103935389E-02); +#206957 = AXIS2_PLACEMENT_3D('',#206958,#206959,#206960); +#206958 = CARTESIAN_POINT('',(117.85959596065,-77.14285596065,1.585)); +#206959 = DIRECTION('',(0.,0.,-1.)); +#206960 = DIRECTION('',(0.999999999872,-1.59896764922E-05,0.)); +#206961 = ORIENTED_EDGE('',*,*,#206962,.T.); +#206962 = EDGE_CURVE('',#206954,#206963,#206965,.T.); +#206963 = VERTEX_POINT('',#206964); +#206964 = CARTESIAN_POINT('',(116.959597,-77.207857,1.585)); +#206965 = LINE('',#206966,#206967); +#206966 = CARTESIAN_POINT('',(117.859597,-77.207857,1.585)); +#206967 = VECTOR('',#206968,1.); +#206968 = DIRECTION('',(-1.,0.,0.)); +#206969 = ORIENTED_EDGE('',*,*,#206970,.T.); +#206970 = EDGE_CURVE('',#206963,#206971,#206973,.T.); +#206971 = VERTEX_POINT('',#206972); +#206972 = CARTESIAN_POINT('',(116.894597,-77.142857,1.585)); +#206973 = CIRCLE('',#206974,6.500103935388E-02); +#206974 = AXIS2_PLACEMENT_3D('',#206975,#206976,#206977); +#206975 = CARTESIAN_POINT('',(116.95959803934,-77.14285596065,1.585)); +#206976 = DIRECTION('',(0.,0.,-1.)); +#206977 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#206978 = ORIENTED_EDGE('',*,*,#206979,.T.); +#206979 = EDGE_CURVE('',#206971,#206980,#206982,.T.); +#206980 = VERTEX_POINT('',#206981); +#206981 = CARTESIAN_POINT('',(116.894597,-76.714285,1.585)); +#206982 = LINE('',#206983,#206984); +#206983 = CARTESIAN_POINT('',(116.894597,-77.142857,1.585)); +#206984 = VECTOR('',#206985,1.); +#206985 = DIRECTION('',(0.,1.,0.)); +#206986 = ORIENTED_EDGE('',*,*,#206987,.T.); +#206987 = EDGE_CURVE('',#206980,#206869,#206988,.T.); +#206988 = LINE('',#206989,#206990); +#206989 = CARTESIAN_POINT('',(116.894597,-76.714285,1.585)); +#206990 = VECTOR('',#206991,1.); +#206991 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#206992 = PLANE('',#206993); +#206993 = AXIS2_PLACEMENT_3D('',#206994,#206995,#206996); +#206994 = CARTESIAN_POINT('',(0.,0.,1.585)); +#206995 = DIRECTION('',(0.,0.,1.)); +#206996 = DIRECTION('',(1.,0.,-0.)); +#206997 = SHELL_BASED_SURFACE_MODEL('',(#206998)); +#206998 = OPEN_SHELL('',(#206999)); +#206999 = ADVANCED_FACE('',(#207000),#207170,.T.); +#207000 = FACE_BOUND('',#207001,.F.); +#207001 = EDGE_LOOP('',(#207002,#207013,#207021,#207030,#207038,#207047, + #207055,#207063,#207071,#207080,#207088,#207097,#207105,#207114, + #207122,#207131,#207139,#207147,#207155,#207164)); +#207002 = ORIENTED_EDGE('',*,*,#207003,.T.); +#207003 = EDGE_CURVE('',#207004,#207006,#207008,.T.); +#207004 = VERTEX_POINT('',#207005); +#207005 = CARTESIAN_POINT('',(139.759349,-76.51118,1.585)); +#207006 = VERTEX_POINT('',#207007); +#207007 = CARTESIAN_POINT('',(139.851273,-76.603104,1.585)); +#207008 = CIRCLE('',#207009,6.50000837538E-02); +#207009 = AXIS2_PLACEMENT_3D('',#207010,#207011,#207012); +#207010 = CARTESIAN_POINT('',(139.80531098493,-76.55714201506,1.585)); +#207011 = DIRECTION('',(0.,0.,-1.)); +#207012 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#207013 = ORIENTED_EDGE('',*,*,#207014,.T.); +#207014 = EDGE_CURVE('',#207006,#207015,#207017,.T.); +#207015 = VERTEX_POINT('',#207016); +#207016 = CARTESIAN_POINT('',(139.819266,-76.63511,1.585)); +#207017 = LINE('',#207018,#207019); +#207018 = CARTESIAN_POINT('',(139.851273,-76.603104,1.585)); +#207019 = VECTOR('',#207020,1.); +#207020 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#207021 = ORIENTED_EDGE('',*,*,#207022,.T.); +#207022 = EDGE_CURVE('',#207015,#207023,#207025,.T.); +#207023 = VERTEX_POINT('',#207024); +#207024 = CARTESIAN_POINT('',(139.819265,-76.907743,1.585)); +#207025 = CIRCLE('',#207026,0.272201331757); +#207026 = AXIS2_PLACEMENT_3D('',#207027,#207028,#207029); +#207027 = CARTESIAN_POINT('',(140.05487402454,-76.77142736419,1.585)); +#207028 = DIRECTION('',(0.,0.,1.)); +#207029 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#207030 = ORIENTED_EDGE('',*,*,#207031,.T.); +#207031 = EDGE_CURVE('',#207023,#207032,#207034,.T.); +#207032 = VERTEX_POINT('',#207033); +#207033 = CARTESIAN_POINT('',(139.886669,-76.975149,1.585)); +#207034 = LINE('',#207035,#207036); +#207035 = CARTESIAN_POINT('',(139.819265,-76.907743,1.585)); +#207036 = VECTOR('',#207037,1.); +#207037 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#207038 = ORIENTED_EDGE('',*,*,#207039,.T.); +#207039 = EDGE_CURVE('',#207032,#207040,#207042,.T.); +#207040 = VERTEX_POINT('',#207041); +#207041 = CARTESIAN_POINT('',(140.225881,-77.049285,1.585)); +#207042 = CIRCLE('',#207043,0.553317785495); +#207043 = AXIS2_PLACEMENT_3D('',#207044,#207045,#207046); +#207044 = CARTESIAN_POINT('',(140.1684500839,-76.49895576979,1.585)); +#207045 = DIRECTION('',(0.,0.,1.)); +#207046 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#207047 = ORIENTED_EDGE('',*,*,#207048,.T.); +#207048 = EDGE_CURVE('',#207040,#207049,#207051,.T.); +#207049 = VERTEX_POINT('',#207050); +#207050 = CARTESIAN_POINT('',(140.382622,-77.010099,1.585)); +#207051 = LINE('',#207052,#207053); +#207052 = CARTESIAN_POINT('',(140.225881,-77.049285,1.585)); +#207053 = VECTOR('',#207054,1.); +#207054 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#207055 = ORIENTED_EDGE('',*,*,#207056,.T.); +#207056 = EDGE_CURVE('',#207049,#207057,#207059,.T.); +#207057 = VERTEX_POINT('',#207058); +#207058 = CARTESIAN_POINT('',(140.452522,-76.97515,1.585)); +#207059 = LINE('',#207060,#207061); +#207060 = CARTESIAN_POINT('',(140.382622,-77.010099,1.585)); +#207061 = VECTOR('',#207062,1.); +#207062 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#207063 = ORIENTED_EDGE('',*,*,#207064,.T.); +#207064 = EDGE_CURVE('',#207057,#207065,#207067,.T.); +#207065 = VERTEX_POINT('',#207066); +#207066 = CARTESIAN_POINT('',(140.519928,-76.907743,1.585)); +#207067 = LINE('',#207068,#207069); +#207068 = CARTESIAN_POINT('',(140.452522,-76.97515,1.585)); +#207069 = VECTOR('',#207070,1.); +#207070 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#207071 = ORIENTED_EDGE('',*,*,#207072,.T.); +#207072 = EDGE_CURVE('',#207065,#207073,#207075,.T.); +#207073 = VERTEX_POINT('',#207074); +#207074 = CARTESIAN_POINT('',(140.519928,-76.635111,1.585)); +#207075 = CIRCLE('',#207076,0.272194686174); +#207076 = AXIS2_PLACEMENT_3D('',#207077,#207078,#207079); +#207077 = CARTESIAN_POINT('',(140.28432686391,-76.771427,1.585)); +#207078 = DIRECTION('',(0.,-0.,1.)); +#207079 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#207080 = ORIENTED_EDGE('',*,*,#207081,.T.); +#207081 = EDGE_CURVE('',#207073,#207082,#207084,.T.); +#207082 = VERTEX_POINT('',#207083); +#207083 = CARTESIAN_POINT('',(140.487921,-76.603104,1.585)); +#207084 = LINE('',#207085,#207086); +#207085 = CARTESIAN_POINT('',(140.519928,-76.635111,1.585)); +#207086 = VECTOR('',#207087,1.); +#207087 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207088 = ORIENTED_EDGE('',*,*,#207089,.T.); +#207089 = EDGE_CURVE('',#207082,#207090,#207092,.T.); +#207090 = VERTEX_POINT('',#207091); +#207091 = CARTESIAN_POINT('',(140.579843,-76.51118,1.585)); +#207092 = CIRCLE('',#207093,6.49993766517E-02); +#207093 = AXIS2_PLACEMENT_3D('',#207094,#207095,#207096); +#207094 = CARTESIAN_POINT('',(140.53388176676,-76.55714176677,1.585)); +#207095 = DIRECTION('',(0.,0.,-1.)); +#207096 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#207097 = ORIENTED_EDGE('',*,*,#207098,.T.); +#207098 = EDGE_CURVE('',#207090,#207099,#207101,.T.); +#207099 = VERTEX_POINT('',#207100); +#207100 = CARTESIAN_POINT('',(140.631003,-76.566461,1.585)); +#207101 = LINE('',#207102,#207103); +#207102 = CARTESIAN_POINT('',(140.579843,-76.51118,1.585)); +#207103 = VECTOR('',#207104,1.); +#207104 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#207105 = ORIENTED_EDGE('',*,*,#207106,.T.); +#207106 = EDGE_CURVE('',#207099,#207107,#207109,.T.); +#207107 = VERTEX_POINT('',#207108); +#207108 = CARTESIAN_POINT('',(140.630999,-76.976399,1.585)); +#207109 = CIRCLE('',#207110,0.409312568567); +#207110 = AXIS2_PLACEMENT_3D('',#207111,#207112,#207113); +#207111 = CARTESIAN_POINT('',(140.27670664807,-76.77142654294,1.585)); +#207112 = DIRECTION('',(0.,0.,-1.)); +#207113 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#207114 = ORIENTED_EDGE('',*,*,#207115,.T.); +#207115 = EDGE_CURVE('',#207107,#207116,#207118,.T.); +#207116 = VERTEX_POINT('',#207117); +#207117 = CARTESIAN_POINT('',(140.528322,-77.080322,1.585)); +#207118 = LINE('',#207119,#207120); +#207119 = CARTESIAN_POINT('',(140.630999,-76.976399,1.585)); +#207120 = VECTOR('',#207121,1.); +#207121 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#207122 = ORIENTED_EDGE('',*,*,#207123,.T.); +#207123 = EDGE_CURVE('',#207116,#207124,#207126,.T.); +#207124 = VERTEX_POINT('',#207125); +#207125 = CARTESIAN_POINT('',(140.089546,-77.177344,1.585)); +#207126 = CIRCLE('',#207127,0.675422176574); +#207127 = AXIS2_PLACEMENT_3D('',#207128,#207129,#207130); +#207128 = CARTESIAN_POINT('',(140.17141275007,-76.50690164465,1.585)); +#207129 = DIRECTION('',(0.,0.,-1.)); +#207130 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#207131 = ORIENTED_EDGE('',*,*,#207132,.T.); +#207132 = EDGE_CURVE('',#207124,#207133,#207135,.T.); +#207133 = VERTEX_POINT('',#207134); +#207134 = CARTESIAN_POINT('',(139.904813,-77.129566,1.585)); +#207135 = LINE('',#207136,#207137); +#207136 = CARTESIAN_POINT('',(140.089546,-77.177344,1.585)); +#207137 = VECTOR('',#207138,1.); +#207138 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#207139 = ORIENTED_EDGE('',*,*,#207140,.T.); +#207140 = EDGE_CURVE('',#207133,#207141,#207143,.T.); +#207141 = VERTEX_POINT('',#207142); +#207142 = CARTESIAN_POINT('',(139.802206,-77.074533,1.585)); +#207143 = LINE('',#207144,#207145); +#207144 = CARTESIAN_POINT('',(139.904813,-77.129566,1.585)); +#207145 = VECTOR('',#207146,1.); +#207146 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#207147 = ORIENTED_EDGE('',*,*,#207148,.T.); +#207148 = EDGE_CURVE('',#207141,#207149,#207151,.T.); +#207149 = VERTEX_POINT('',#207150); +#207150 = CARTESIAN_POINT('',(139.708191,-76.976395,1.585)); +#207151 = LINE('',#207152,#207153); +#207152 = CARTESIAN_POINT('',(139.802206,-77.074533,1.585)); +#207153 = VECTOR('',#207154,1.); +#207154 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#207155 = ORIENTED_EDGE('',*,*,#207156,.T.); +#207156 = EDGE_CURVE('',#207149,#207157,#207159,.T.); +#207157 = VERTEX_POINT('',#207158); +#207158 = CARTESIAN_POINT('',(139.708194,-76.566455,1.585)); +#207159 = CIRCLE('',#207160,0.409312909751); +#207160 = AXIS2_PLACEMENT_3D('',#207161,#207162,#207163); +#207161 = CARTESIAN_POINT('',(140.06248666757,-76.77142759277,1.585)); +#207162 = DIRECTION('',(0.,0.,-1.)); +#207163 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#207164 = ORIENTED_EDGE('',*,*,#207165,.T.); +#207165 = EDGE_CURVE('',#207157,#207004,#207166,.T.); +#207166 = LINE('',#207167,#207168); +#207167 = CARTESIAN_POINT('',(139.708194,-76.566455,1.585)); +#207168 = VECTOR('',#207169,1.); +#207169 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#207170 = PLANE('',#207171); +#207171 = AXIS2_PLACEMENT_3D('',#207172,#207173,#207174); +#207172 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207173 = DIRECTION('',(0.,0.,1.)); +#207174 = DIRECTION('',(1.,0.,-0.)); +#207175 = SHELL_BASED_SURFACE_MODEL('',(#207176)); +#207176 = OPEN_SHELL('',(#207177)); +#207177 = ADVANCED_FACE('',(#207178),#207247,.T.); +#207178 = FACE_BOUND('',#207179,.F.); +#207179 = EDGE_LOOP('',(#207180,#207191,#207199,#207208,#207216,#207225, + #207233,#207241)); +#207180 = ORIENTED_EDGE('',*,*,#207181,.T.); +#207181 = EDGE_CURVE('',#207182,#207184,#207186,.T.); +#207182 = VERTEX_POINT('',#207183); +#207183 = CARTESIAN_POINT('',(135.449545,-76.653696,1.585)); +#207184 = VERTEX_POINT('',#207185); +#207185 = CARTESIAN_POINT('',(135.574597,-76.67857,1.585)); +#207186 = CIRCLE('',#207187,6.499988811648E-02); +#207187 = AXIS2_PLACEMENT_3D('',#207188,#207189,#207190); +#207188 = CARTESIAN_POINT('',(135.50959711188,-76.6785702701,1.585)); +#207189 = DIRECTION('',(0.,0.,-1.)); +#207190 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207191 = ORIENTED_EDGE('',*,*,#207192,.T.); +#207192 = EDGE_CURVE('',#207184,#207193,#207195,.T.); +#207193 = VERTEX_POINT('',#207194); +#207194 = CARTESIAN_POINT('',(135.574597,-77.107142,1.585)); +#207195 = LINE('',#207196,#207197); +#207196 = CARTESIAN_POINT('',(135.574597,-76.67857,1.585)); +#207197 = VECTOR('',#207198,1.); +#207198 = DIRECTION('',(0.,-1.,0.)); +#207199 = ORIENTED_EDGE('',*,*,#207200,.T.); +#207200 = EDGE_CURVE('',#207193,#207201,#207203,.T.); +#207201 = VERTEX_POINT('',#207202); +#207202 = CARTESIAN_POINT('',(135.509597,-77.172142,1.585)); +#207203 = CIRCLE('',#207204,6.500103935393E-02); +#207204 = AXIS2_PLACEMENT_3D('',#207205,#207206,#207207); +#207205 = CARTESIAN_POINT('',(135.50959596065,-77.10714096065,1.585)); +#207206 = DIRECTION('',(0.,0.,-1.)); +#207207 = DIRECTION('',(0.999999999872,-1.598967714806E-05,0.)); +#207208 = ORIENTED_EDGE('',*,*,#207209,.T.); +#207209 = EDGE_CURVE('',#207201,#207210,#207212,.T.); +#207210 = VERTEX_POINT('',#207211); +#207211 = CARTESIAN_POINT('',(134.609597,-77.172142,1.585)); +#207212 = LINE('',#207213,#207214); +#207213 = CARTESIAN_POINT('',(135.509597,-77.172142,1.585)); +#207214 = VECTOR('',#207215,1.); +#207215 = DIRECTION('',(-1.,0.,0.)); +#207216 = ORIENTED_EDGE('',*,*,#207217,.T.); +#207217 = EDGE_CURVE('',#207210,#207218,#207220,.T.); +#207218 = VERTEX_POINT('',#207219); +#207219 = CARTESIAN_POINT('',(134.609597,-77.042142,1.585)); +#207220 = CIRCLE('',#207221,6.500000000091E-02); +#207221 = AXIS2_PLACEMENT_3D('',#207222,#207223,#207224); +#207222 = CARTESIAN_POINT('',(134.60959734486,-77.107142,1.585)); +#207223 = DIRECTION('',(0.,0.,-1.)); +#207224 = DIRECTION('',(-5.30565758841E-06,-0.999999999986,-0.)); +#207225 = ORIENTED_EDGE('',*,*,#207226,.T.); +#207226 = EDGE_CURVE('',#207218,#207227,#207229,.T.); +#207227 = VERTEX_POINT('',#207228); +#207228 = CARTESIAN_POINT('',(135.444597,-77.042142,1.585)); +#207229 = LINE('',#207230,#207231); +#207230 = CARTESIAN_POINT('',(134.609597,-77.042142,1.585)); +#207231 = VECTOR('',#207232,1.); +#207232 = DIRECTION('',(1.,0.,0.)); +#207233 = ORIENTED_EDGE('',*,*,#207234,.T.); +#207234 = EDGE_CURVE('',#207227,#207235,#207237,.T.); +#207235 = VERTEX_POINT('',#207236); +#207236 = CARTESIAN_POINT('',(135.444597,-76.67857,1.585)); +#207237 = LINE('',#207238,#207239); +#207238 = CARTESIAN_POINT('',(135.444597,-77.042142,1.585)); +#207239 = VECTOR('',#207240,1.); +#207240 = DIRECTION('',(0.,1.,0.)); +#207241 = ORIENTED_EDGE('',*,*,#207242,.T.); +#207242 = EDGE_CURVE('',#207235,#207182,#207243,.T.); +#207243 = LINE('',#207244,#207245); +#207244 = CARTESIAN_POINT('',(135.444597,-76.67857,1.585)); +#207245 = VECTOR('',#207246,1.); +#207246 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207247 = PLANE('',#207248); +#207248 = AXIS2_PLACEMENT_3D('',#207249,#207250,#207251); +#207249 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207250 = DIRECTION('',(0.,0.,1.)); +#207251 = DIRECTION('',(1.,0.,-0.)); +#207252 = SHELL_BASED_SURFACE_MODEL('',(#207253)); +#207253 = OPEN_SHELL('',(#207254)); +#207254 = ADVANCED_FACE('',(#207255,#207356),#207431,.T.); +#207255 = FACE_BOUND('',#207256,.F.); +#207256 = EDGE_LOOP('',(#207257,#207268,#207276,#207284,#207292,#207300, + #207308,#207317,#207325,#207334,#207342,#207350)); +#207257 = ORIENTED_EDGE('',*,*,#207258,.T.); +#207258 = EDGE_CURVE('',#207259,#207261,#207263,.T.); +#207259 = VERTEX_POINT('',#207260); +#207260 = CARTESIAN_POINT('',(142.35087,-76.612533,1.585)); +#207261 = VERTEX_POINT('',#207262); +#207262 = CARTESIAN_POINT('',(142.781693,-76.515124,1.585)); +#207263 = CIRCLE('',#207264,0.670538401945); +#207264 = AXIS2_PLACEMENT_3D('',#207265,#207266,#207267); +#207265 = CARTESIAN_POINT('',(142.70590657351,-77.18136582249,1.585)); +#207266 = DIRECTION('',(0.,0.,-1.)); +#207267 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#207268 = ORIENTED_EDGE('',*,*,#207269,.T.); +#207269 = EDGE_CURVE('',#207261,#207270,#207272,.T.); +#207270 = VERTEX_POINT('',#207271); +#207271 = CARTESIAN_POINT('',(142.97438,-76.56329,1.585)); +#207272 = LINE('',#207273,#207274); +#207273 = CARTESIAN_POINT('',(142.781693,-76.515124,1.585)); +#207274 = VECTOR('',#207275,1.); +#207275 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#207276 = ORIENTED_EDGE('',*,*,#207277,.T.); +#207277 = EDGE_CURVE('',#207270,#207278,#207280,.T.); +#207278 = VERTEX_POINT('',#207279); +#207279 = CARTESIAN_POINT('',(143.076987,-76.618323,1.585)); +#207280 = LINE('',#207281,#207282); +#207281 = CARTESIAN_POINT('',(142.97438,-76.56329,1.585)); +#207282 = VECTOR('',#207283,1.); +#207283 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#207284 = ORIENTED_EDGE('',*,*,#207285,.T.); +#207285 = EDGE_CURVE('',#207278,#207286,#207288,.T.); +#207286 = VERTEX_POINT('',#207287); +#207287 = CARTESIAN_POINT('',(143.170999,-76.716456,1.585)); +#207288 = LINE('',#207289,#207290); +#207289 = CARTESIAN_POINT('',(143.076987,-76.618323,1.585)); +#207290 = VECTOR('',#207291,1.); +#207291 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#207292 = ORIENTED_EDGE('',*,*,#207293,.T.); +#207293 = EDGE_CURVE('',#207286,#207294,#207296,.T.); +#207294 = VERTEX_POINT('',#207295); +#207295 = CARTESIAN_POINT('',(143.222563,-76.868348,1.585)); +#207296 = LINE('',#207297,#207298); +#207297 = CARTESIAN_POINT('',(143.170999,-76.716456,1.585)); +#207298 = VECTOR('',#207299,1.); +#207299 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#207300 = ORIENTED_EDGE('',*,*,#207301,.T.); +#207301 = EDGE_CURVE('',#207294,#207302,#207304,.T.); +#207302 = VERTEX_POINT('',#207303); +#207303 = CARTESIAN_POINT('',(143.224597,-77.092857,1.585)); +#207304 = LINE('',#207305,#207306); +#207305 = CARTESIAN_POINT('',(143.222563,-76.868348,1.585)); +#207306 = VECTOR('',#207307,1.); +#207307 = DIRECTION('',(9.059398644723E-03,-0.999958962806,0.)); +#207308 = ORIENTED_EDGE('',*,*,#207309,.T.); +#207309 = EDGE_CURVE('',#207302,#207310,#207312,.T.); +#207310 = VERTEX_POINT('',#207311); +#207311 = CARTESIAN_POINT('',(143.159597,-77.157857,1.585)); +#207312 = CIRCLE('',#207313,6.500103935387E-02); +#207313 = AXIS2_PLACEMENT_3D('',#207314,#207315,#207316); +#207314 = CARTESIAN_POINT('',(143.15959596065,-77.09285596065,1.585)); +#207315 = DIRECTION('',(0.,0.,-1.)); +#207316 = DIRECTION('',(0.999999999872,-1.59896756177E-05,0.)); +#207317 = ORIENTED_EDGE('',*,*,#207318,.T.); +#207318 = EDGE_CURVE('',#207310,#207319,#207321,.T.); +#207319 = VERTEX_POINT('',#207320); +#207320 = CARTESIAN_POINT('',(142.259597,-77.157857,1.585)); +#207321 = LINE('',#207322,#207323); +#207322 = CARTESIAN_POINT('',(143.159597,-77.157857,1.585)); +#207323 = VECTOR('',#207324,1.); +#207324 = DIRECTION('',(-1.,0.,0.)); +#207325 = ORIENTED_EDGE('',*,*,#207326,.T.); +#207326 = EDGE_CURVE('',#207319,#207327,#207329,.T.); +#207327 = VERTEX_POINT('',#207328); +#207328 = CARTESIAN_POINT('',(142.194597,-77.092857,1.585)); +#207329 = CIRCLE('',#207330,6.500103935396E-02); +#207330 = AXIS2_PLACEMENT_3D('',#207331,#207332,#207333); +#207331 = CARTESIAN_POINT('',(142.25959803934,-77.09285596065,1.585)); +#207332 = DIRECTION('',(0.,0.,-1.)); +#207333 = DIRECTION('',(-1.598967692943E-05,-0.999999999872,-0.)); +#207334 = ORIENTED_EDGE('',*,*,#207335,.T.); +#207335 = EDGE_CURVE('',#207327,#207336,#207338,.T.); +#207336 = VERTEX_POINT('',#207337); +#207337 = CARTESIAN_POINT('',(142.19663,-76.868348,1.585)); +#207338 = LINE('',#207339,#207340); +#207339 = CARTESIAN_POINT('',(142.194597,-77.092857,1.585)); +#207340 = VECTOR('',#207341,1.); +#207341 = DIRECTION('',(9.054945028507E-03,0.999959003145,0.)); +#207342 = ORIENTED_EDGE('',*,*,#207343,.T.); +#207343 = EDGE_CURVE('',#207336,#207344,#207346,.T.); +#207344 = VERTEX_POINT('',#207345); +#207345 = CARTESIAN_POINT('',(142.248191,-76.71646,1.585)); +#207346 = LINE('',#207347,#207348); +#207347 = CARTESIAN_POINT('',(142.19663,-76.868348,1.585)); +#207348 = VECTOR('',#207349,1.); +#207349 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#207350 = ORIENTED_EDGE('',*,*,#207351,.T.); +#207351 = EDGE_CURVE('',#207344,#207259,#207352,.T.); +#207352 = LINE('',#207353,#207354); +#207353 = CARTESIAN_POINT('',(142.248191,-76.71646,1.585)); +#207354 = VECTOR('',#207355,1.); +#207355 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#207356 = FACE_BOUND('',#207357,.F.); +#207357 = EDGE_LOOP('',(#207358,#207369,#207377,#207385,#207393,#207401, + #207409,#207417,#207425)); +#207358 = ORIENTED_EDGE('',*,*,#207359,.T.); +#207359 = EDGE_CURVE('',#207360,#207362,#207364,.T.); +#207360 = VERTEX_POINT('',#207361); +#207361 = CARTESIAN_POINT('',(142.922622,-76.682756,1.585)); +#207362 = VERTEX_POINT('',#207363); +#207363 = CARTESIAN_POINT('',(142.426669,-76.717706,1.585)); +#207364 = CIRCLE('',#207365,0.559258743581); +#207365 = AXIS2_PLACEMENT_3D('',#207366,#207367,#207368); +#207366 = CARTESIAN_POINT('',(142.70986183298,-77.19996336035,1.585)); +#207367 = DIRECTION('',(0.,0.,1.)); +#207368 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#207369 = ORIENTED_EDGE('',*,*,#207370,.T.); +#207370 = EDGE_CURVE('',#207362,#207371,#207373,.T.); +#207371 = VERTEX_POINT('',#207372); +#207372 = CARTESIAN_POINT('',(142.359265,-76.785112,1.585)); +#207373 = LINE('',#207374,#207375); +#207374 = CARTESIAN_POINT('',(142.426669,-76.717706,1.585)); +#207375 = VECTOR('',#207376,1.); +#207376 = DIRECTION('',(-0.707096290689,-0.707117271529,0.)); +#207377 = ORIENTED_EDGE('',*,*,#207378,.T.); +#207378 = EDGE_CURVE('',#207371,#207379,#207381,.T.); +#207379 = VERTEX_POINT('',#207380); +#207380 = CARTESIAN_POINT('',(142.324597,-76.889118,1.585)); +#207381 = LINE('',#207382,#207383); +#207382 = CARTESIAN_POINT('',(142.359265,-76.785112,1.585)); +#207383 = VECTOR('',#207384,1.); +#207384 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#207385 = ORIENTED_EDGE('',*,*,#207386,.T.); +#207386 = EDGE_CURVE('',#207379,#207387,#207389,.T.); +#207387 = VERTEX_POINT('',#207388); +#207388 = CARTESIAN_POINT('',(142.324597,-77.027857,1.585)); +#207389 = LINE('',#207390,#207391); +#207390 = CARTESIAN_POINT('',(142.324597,-76.889118,1.585)); +#207391 = VECTOR('',#207392,1.); +#207392 = DIRECTION('',(0.,-1.,0.)); +#207393 = ORIENTED_EDGE('',*,*,#207394,.T.); +#207394 = EDGE_CURVE('',#207387,#207395,#207397,.T.); +#207395 = VERTEX_POINT('',#207396); +#207396 = CARTESIAN_POINT('',(143.094597,-77.027857,1.585)); +#207397 = LINE('',#207398,#207399); +#207398 = CARTESIAN_POINT('',(142.324597,-77.027857,1.585)); +#207399 = VECTOR('',#207400,1.); +#207400 = DIRECTION('',(1.,0.,0.)); +#207401 = ORIENTED_EDGE('',*,*,#207402,.T.); +#207402 = EDGE_CURVE('',#207395,#207403,#207405,.T.); +#207403 = VERTEX_POINT('',#207404); +#207404 = CARTESIAN_POINT('',(143.094597,-76.889118,1.585)); +#207405 = LINE('',#207406,#207407); +#207406 = CARTESIAN_POINT('',(143.094597,-77.027857,1.585)); +#207407 = VECTOR('',#207408,1.); +#207408 = DIRECTION('',(0.,1.,0.)); +#207409 = ORIENTED_EDGE('',*,*,#207410,.T.); +#207410 = EDGE_CURVE('',#207403,#207411,#207413,.T.); +#207411 = VERTEX_POINT('',#207412); +#207412 = CARTESIAN_POINT('',(143.059928,-76.785112,1.585)); +#207413 = LINE('',#207414,#207415); +#207414 = CARTESIAN_POINT('',(143.094597,-76.889118,1.585)); +#207415 = VECTOR('',#207416,1.); +#207416 = DIRECTION('',(-0.316230502441,0.948682385905,0.)); +#207417 = ORIENTED_EDGE('',*,*,#207418,.T.); +#207418 = EDGE_CURVE('',#207411,#207419,#207421,.T.); +#207419 = VERTEX_POINT('',#207420); +#207420 = CARTESIAN_POINT('',(142.992522,-76.717706,1.585)); +#207421 = LINE('',#207422,#207423); +#207422 = CARTESIAN_POINT('',(143.059928,-76.785112,1.585)); +#207423 = VECTOR('',#207424,1.); +#207424 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#207425 = ORIENTED_EDGE('',*,*,#207426,.T.); +#207426 = EDGE_CURVE('',#207419,#207360,#207427,.T.); +#207427 = LINE('',#207428,#207429); +#207428 = CARTESIAN_POINT('',(142.992522,-76.717706,1.585)); +#207429 = VECTOR('',#207430,1.); +#207430 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#207431 = PLANE('',#207432); +#207432 = AXIS2_PLACEMENT_3D('',#207433,#207434,#207435); +#207433 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207434 = DIRECTION('',(0.,0.,1.)); +#207435 = DIRECTION('',(1.,0.,-0.)); +#207436 = SHELL_BASED_SURFACE_MODEL('',(#207437)); +#207437 = OPEN_SHELL('',(#207438)); +#207438 = ADVANCED_FACE('',(#207439),#207516,.T.); +#207439 = FACE_BOUND('',#207440,.F.); +#207440 = EDGE_LOOP('',(#207441,#207452,#207460,#207468,#207477,#207485, + #207493,#207502,#207510)); +#207441 = ORIENTED_EDGE('',*,*,#207442,.T.); +#207442 = EDGE_CURVE('',#207443,#207445,#207447,.T.); +#207443 = VERTEX_POINT('',#207444); +#207444 = CARTESIAN_POINT('',(145.179545,-76.525126,1.585)); +#207445 = VERTEX_POINT('',#207446); +#207446 = CARTESIAN_POINT('',(145.304597,-76.55,1.585)); +#207447 = CIRCLE('',#207448,6.499988811649E-02); +#207448 = AXIS2_PLACEMENT_3D('',#207449,#207450,#207451); +#207449 = CARTESIAN_POINT('',(145.23959711188,-76.5500002701,1.585)); +#207450 = DIRECTION('',(0.,0.,-1.)); +#207451 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#207452 = ORIENTED_EDGE('',*,*,#207453,.T.); +#207453 = EDGE_CURVE('',#207445,#207454,#207456,.T.); +#207454 = VERTEX_POINT('',#207455); +#207455 = CARTESIAN_POINT('',(145.304597,-76.742142,1.585)); +#207456 = LINE('',#207457,#207458); +#207457 = CARTESIAN_POINT('',(145.304597,-76.55,1.585)); +#207458 = VECTOR('',#207459,1.); +#207459 = DIRECTION('',(0.,-1.,0.)); +#207460 = ORIENTED_EDGE('',*,*,#207461,.T.); +#207461 = EDGE_CURVE('',#207454,#207462,#207464,.T.); +#207462 = VERTEX_POINT('',#207463); +#207463 = CARTESIAN_POINT('',(146.139597,-76.742142,1.585)); +#207464 = LINE('',#207465,#207466); +#207465 = CARTESIAN_POINT('',(145.304597,-76.742142,1.585)); +#207466 = VECTOR('',#207467,1.); +#207467 = DIRECTION('',(1.,0.,0.)); +#207468 = ORIENTED_EDGE('',*,*,#207469,.T.); +#207469 = EDGE_CURVE('',#207462,#207470,#207472,.T.); +#207470 = VERTEX_POINT('',#207471); +#207471 = CARTESIAN_POINT('',(146.139597,-76.872142,1.585)); +#207472 = CIRCLE('',#207473,6.500000000091E-02); +#207473 = AXIS2_PLACEMENT_3D('',#207474,#207475,#207476); +#207474 = CARTESIAN_POINT('',(146.13959665513,-76.807142,1.585)); +#207475 = DIRECTION('',(0.,0.,-1.)); +#207476 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#207477 = ORIENTED_EDGE('',*,*,#207478,.T.); +#207478 = EDGE_CURVE('',#207470,#207479,#207481,.T.); +#207479 = VERTEX_POINT('',#207480); +#207480 = CARTESIAN_POINT('',(145.304597,-76.872142,1.585)); +#207481 = LINE('',#207482,#207483); +#207482 = CARTESIAN_POINT('',(146.139597,-76.872142,1.585)); +#207483 = VECTOR('',#207484,1.); +#207484 = DIRECTION('',(-1.,0.,0.)); +#207485 = ORIENTED_EDGE('',*,*,#207486,.T.); +#207486 = EDGE_CURVE('',#207479,#207487,#207489,.T.); +#207487 = VERTEX_POINT('',#207488); +#207488 = CARTESIAN_POINT('',(145.304597,-77.064285,1.585)); +#207489 = LINE('',#207490,#207491); +#207490 = CARTESIAN_POINT('',(145.304597,-76.872142,1.585)); +#207491 = VECTOR('',#207492,1.); +#207492 = DIRECTION('',(0.,-1.,0.)); +#207493 = ORIENTED_EDGE('',*,*,#207494,.T.); +#207494 = EDGE_CURVE('',#207487,#207495,#207497,.T.); +#207495 = VERTEX_POINT('',#207496); +#207496 = CARTESIAN_POINT('',(145.174597,-77.064285,1.585)); +#207497 = CIRCLE('',#207498,6.500000000091E-02); +#207498 = AXIS2_PLACEMENT_3D('',#207499,#207500,#207501); +#207499 = CARTESIAN_POINT('',(145.239597,-77.06428465513,1.585)); +#207500 = DIRECTION('',(-0.,0.,-1.)); +#207501 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#207502 = ORIENTED_EDGE('',*,*,#207503,.T.); +#207503 = EDGE_CURVE('',#207495,#207504,#207506,.T.); +#207504 = VERTEX_POINT('',#207505); +#207505 = CARTESIAN_POINT('',(145.174597,-76.55,1.585)); +#207506 = LINE('',#207507,#207508); +#207507 = CARTESIAN_POINT('',(145.174597,-77.064285,1.585)); +#207508 = VECTOR('',#207509,1.); +#207509 = DIRECTION('',(0.,1.,0.)); +#207510 = ORIENTED_EDGE('',*,*,#207511,.T.); +#207511 = EDGE_CURVE('',#207504,#207443,#207512,.T.); +#207512 = LINE('',#207513,#207514); +#207513 = CARTESIAN_POINT('',(145.174597,-76.55,1.585)); +#207514 = VECTOR('',#207515,1.); +#207515 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#207516 = PLANE('',#207517); +#207517 = AXIS2_PLACEMENT_3D('',#207518,#207519,#207520); +#207518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207519 = DIRECTION('',(0.,0.,1.)); +#207520 = DIRECTION('',(1.,0.,-0.)); +#207521 = SHELL_BASED_SURFACE_MODEL('',(#207522)); +#207522 = OPEN_SHELL('',(#207523)); +#207523 = ADVANCED_FACE('',(#207524),#207593,.T.); +#207524 = FACE_BOUND('',#207525,.F.); +#207525 = EDGE_LOOP('',(#207526,#207537,#207545,#207554,#207562,#207571, + #207579,#207587)); +#207526 = ORIENTED_EDGE('',*,*,#207527,.T.); +#207527 = EDGE_CURVE('',#207528,#207530,#207532,.T.); +#207528 = VERTEX_POINT('',#207529); +#207529 = CARTESIAN_POINT('',(107.539545,-76.575125,1.585)); +#207530 = VERTEX_POINT('',#207531); +#207531 = CARTESIAN_POINT('',(107.664597,-76.599999,1.585)); +#207532 = CIRCLE('',#207533,6.499988811648E-02); +#207533 = AXIS2_PLACEMENT_3D('',#207534,#207535,#207536); +#207534 = CARTESIAN_POINT('',(107.59959711188,-76.5999992701,1.585)); +#207535 = DIRECTION('',(0.,0.,-1.)); +#207536 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207537 = ORIENTED_EDGE('',*,*,#207538,.T.); +#207538 = EDGE_CURVE('',#207530,#207539,#207541,.T.); +#207539 = VERTEX_POINT('',#207540); +#207540 = CARTESIAN_POINT('',(107.664597,-77.028571,1.585)); +#207541 = LINE('',#207542,#207543); +#207542 = CARTESIAN_POINT('',(107.664597,-76.599999,1.585)); +#207543 = VECTOR('',#207544,1.); +#207544 = DIRECTION('',(0.,-1.,0.)); +#207545 = ORIENTED_EDGE('',*,*,#207546,.T.); +#207546 = EDGE_CURVE('',#207539,#207547,#207549,.T.); +#207547 = VERTEX_POINT('',#207548); +#207548 = CARTESIAN_POINT('',(107.599597,-77.093571,1.585)); +#207549 = CIRCLE('',#207550,6.500103935388E-02); +#207550 = AXIS2_PLACEMENT_3D('',#207551,#207552,#207553); +#207551 = CARTESIAN_POINT('',(107.59959596065,-77.02856996065,1.585)); +#207552 = DIRECTION('',(0.,0.,-1.)); +#207553 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#207554 = ORIENTED_EDGE('',*,*,#207555,.T.); +#207555 = EDGE_CURVE('',#207547,#207556,#207558,.T.); +#207556 = VERTEX_POINT('',#207557); +#207557 = CARTESIAN_POINT('',(106.699597,-77.093571,1.585)); +#207558 = LINE('',#207559,#207560); +#207559 = CARTESIAN_POINT('',(107.599597,-77.093571,1.585)); +#207560 = VECTOR('',#207561,1.); +#207561 = DIRECTION('',(-1.,0.,0.)); +#207562 = ORIENTED_EDGE('',*,*,#207563,.T.); +#207563 = EDGE_CURVE('',#207556,#207564,#207566,.T.); +#207564 = VERTEX_POINT('',#207565); +#207565 = CARTESIAN_POINT('',(106.699597,-76.963571,1.585)); +#207566 = CIRCLE('',#207567,6.500000000091E-02); +#207567 = AXIS2_PLACEMENT_3D('',#207568,#207569,#207570); +#207568 = CARTESIAN_POINT('',(106.69959734486,-77.028571,1.585)); +#207569 = DIRECTION('',(0.,0.,-1.)); +#207570 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#207571 = ORIENTED_EDGE('',*,*,#207572,.T.); +#207572 = EDGE_CURVE('',#207564,#207573,#207575,.T.); +#207573 = VERTEX_POINT('',#207574); +#207574 = CARTESIAN_POINT('',(107.534597,-76.963571,1.585)); +#207575 = LINE('',#207576,#207577); +#207576 = CARTESIAN_POINT('',(106.699597,-76.963571,1.585)); +#207577 = VECTOR('',#207578,1.); +#207578 = DIRECTION('',(1.,0.,0.)); +#207579 = ORIENTED_EDGE('',*,*,#207580,.T.); +#207580 = EDGE_CURVE('',#207573,#207581,#207583,.T.); +#207581 = VERTEX_POINT('',#207582); +#207582 = CARTESIAN_POINT('',(107.534597,-76.599999,1.585)); +#207583 = LINE('',#207584,#207585); +#207584 = CARTESIAN_POINT('',(107.534597,-76.963571,1.585)); +#207585 = VECTOR('',#207586,1.); +#207586 = DIRECTION('',(0.,1.,0.)); +#207587 = ORIENTED_EDGE('',*,*,#207588,.T.); +#207588 = EDGE_CURVE('',#207581,#207528,#207589,.T.); +#207589 = LINE('',#207590,#207591); +#207590 = CARTESIAN_POINT('',(107.534597,-76.599999,1.585)); +#207591 = VECTOR('',#207592,1.); +#207592 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207593 = PLANE('',#207594); +#207594 = AXIS2_PLACEMENT_3D('',#207595,#207596,#207597); +#207595 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207596 = DIRECTION('',(0.,0.,1.)); +#207597 = DIRECTION('',(1.,0.,-0.)); +#207598 = SHELL_BASED_SURFACE_MODEL('',(#207599)); +#207599 = OPEN_SHELL('',(#207600)); +#207600 = ADVANCED_FACE('',(#207601),#207670,.T.); +#207601 = FACE_BOUND('',#207602,.F.); +#207602 = EDGE_LOOP('',(#207603,#207614,#207622,#207631,#207639,#207648, + #207656,#207664)); +#207603 = ORIENTED_EDGE('',*,*,#207604,.T.); +#207604 = EDGE_CURVE('',#207605,#207607,#207609,.T.); +#207605 = VERTEX_POINT('',#207606); +#207606 = CARTESIAN_POINT('',(110.079545,-76.575125,1.585)); +#207607 = VERTEX_POINT('',#207608); +#207608 = CARTESIAN_POINT('',(110.204597,-76.599999,1.585)); +#207609 = CIRCLE('',#207610,6.499988811649E-02); +#207610 = AXIS2_PLACEMENT_3D('',#207611,#207612,#207613); +#207611 = CARTESIAN_POINT('',(110.13959711188,-76.5999992701,1.585)); +#207612 = DIRECTION('',(0.,0.,-1.)); +#207613 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#207614 = ORIENTED_EDGE('',*,*,#207615,.T.); +#207615 = EDGE_CURVE('',#207607,#207616,#207618,.T.); +#207616 = VERTEX_POINT('',#207617); +#207617 = CARTESIAN_POINT('',(110.204597,-77.028571,1.585)); +#207618 = LINE('',#207619,#207620); +#207619 = CARTESIAN_POINT('',(110.204597,-76.599999,1.585)); +#207620 = VECTOR('',#207621,1.); +#207621 = DIRECTION('',(0.,-1.,0.)); +#207622 = ORIENTED_EDGE('',*,*,#207623,.T.); +#207623 = EDGE_CURVE('',#207616,#207624,#207626,.T.); +#207624 = VERTEX_POINT('',#207625); +#207625 = CARTESIAN_POINT('',(110.139597,-77.093571,1.585)); +#207626 = CIRCLE('',#207627,6.500103935393E-02); +#207627 = AXIS2_PLACEMENT_3D('',#207628,#207629,#207630); +#207628 = CARTESIAN_POINT('',(110.13959596065,-77.02856996065,1.585)); +#207629 = DIRECTION('',(0.,0.,-1.)); +#207630 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#207631 = ORIENTED_EDGE('',*,*,#207632,.T.); +#207632 = EDGE_CURVE('',#207624,#207633,#207635,.T.); +#207633 = VERTEX_POINT('',#207634); +#207634 = CARTESIAN_POINT('',(109.239597,-77.093571,1.585)); +#207635 = LINE('',#207636,#207637); +#207636 = CARTESIAN_POINT('',(110.139597,-77.093571,1.585)); +#207637 = VECTOR('',#207638,1.); +#207638 = DIRECTION('',(-1.,0.,0.)); +#207639 = ORIENTED_EDGE('',*,*,#207640,.T.); +#207640 = EDGE_CURVE('',#207633,#207641,#207643,.T.); +#207641 = VERTEX_POINT('',#207642); +#207642 = CARTESIAN_POINT('',(109.239597,-76.963571,1.585)); +#207643 = CIRCLE('',#207644,6.500000000091E-02); +#207644 = AXIS2_PLACEMENT_3D('',#207645,#207646,#207647); +#207645 = CARTESIAN_POINT('',(109.23959734486,-77.028571,1.585)); +#207646 = DIRECTION('',(0.,0.,-1.)); +#207647 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#207648 = ORIENTED_EDGE('',*,*,#207649,.T.); +#207649 = EDGE_CURVE('',#207641,#207650,#207652,.T.); +#207650 = VERTEX_POINT('',#207651); +#207651 = CARTESIAN_POINT('',(110.074597,-76.963571,1.585)); +#207652 = LINE('',#207653,#207654); +#207653 = CARTESIAN_POINT('',(109.239597,-76.963571,1.585)); +#207654 = VECTOR('',#207655,1.); +#207655 = DIRECTION('',(1.,0.,0.)); +#207656 = ORIENTED_EDGE('',*,*,#207657,.T.); +#207657 = EDGE_CURVE('',#207650,#207658,#207660,.T.); +#207658 = VERTEX_POINT('',#207659); +#207659 = CARTESIAN_POINT('',(110.074597,-76.599999,1.585)); +#207660 = LINE('',#207661,#207662); +#207661 = CARTESIAN_POINT('',(110.074597,-76.963571,1.585)); +#207662 = VECTOR('',#207663,1.); +#207663 = DIRECTION('',(0.,1.,0.)); +#207664 = ORIENTED_EDGE('',*,*,#207665,.T.); +#207665 = EDGE_CURVE('',#207658,#207605,#207666,.T.); +#207666 = LINE('',#207667,#207668); +#207667 = CARTESIAN_POINT('',(110.074597,-76.599999,1.585)); +#207668 = VECTOR('',#207669,1.); +#207669 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207670 = PLANE('',#207671); +#207671 = AXIS2_PLACEMENT_3D('',#207672,#207673,#207674); +#207672 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207673 = DIRECTION('',(0.,0.,1.)); +#207674 = DIRECTION('',(1.,0.,-0.)); +#207675 = SHELL_BASED_SURFACE_MODEL('',(#207676)); +#207676 = OPEN_SHELL('',(#207677)); +#207677 = ADVANCED_FACE('',(#207678),#207747,.T.); +#207678 = FACE_BOUND('',#207679,.F.); +#207679 = EDGE_LOOP('',(#207680,#207691,#207699,#207708,#207716,#207725, + #207733,#207741)); +#207680 = ORIENTED_EDGE('',*,*,#207681,.T.); +#207681 = EDGE_CURVE('',#207682,#207684,#207686,.T.); +#207682 = VERTEX_POINT('',#207683); +#207683 = CARTESIAN_POINT('',(112.619545,-76.575125,1.585)); +#207684 = VERTEX_POINT('',#207685); +#207685 = CARTESIAN_POINT('',(112.744597,-76.599999,1.585)); +#207686 = CIRCLE('',#207687,6.499988811649E-02); +#207687 = AXIS2_PLACEMENT_3D('',#207688,#207689,#207690); +#207688 = CARTESIAN_POINT('',(112.67959711188,-76.5999992701,1.585)); +#207689 = DIRECTION('',(0.,0.,-1.)); +#207690 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#207691 = ORIENTED_EDGE('',*,*,#207692,.T.); +#207692 = EDGE_CURVE('',#207684,#207693,#207695,.T.); +#207693 = VERTEX_POINT('',#207694); +#207694 = CARTESIAN_POINT('',(112.744597,-77.028571,1.585)); +#207695 = LINE('',#207696,#207697); +#207696 = CARTESIAN_POINT('',(112.744597,-76.599999,1.585)); +#207697 = VECTOR('',#207698,1.); +#207698 = DIRECTION('',(0.,-1.,0.)); +#207699 = ORIENTED_EDGE('',*,*,#207700,.T.); +#207700 = EDGE_CURVE('',#207693,#207701,#207703,.T.); +#207701 = VERTEX_POINT('',#207702); +#207702 = CARTESIAN_POINT('',(112.679597,-77.093571,1.585)); +#207703 = CIRCLE('',#207704,6.500103935389E-02); +#207704 = AXIS2_PLACEMENT_3D('',#207705,#207706,#207707); +#207705 = CARTESIAN_POINT('',(112.67959596065,-77.02856996065,1.585)); +#207706 = DIRECTION('',(0.,0.,-1.)); +#207707 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#207708 = ORIENTED_EDGE('',*,*,#207709,.T.); +#207709 = EDGE_CURVE('',#207701,#207710,#207712,.T.); +#207710 = VERTEX_POINT('',#207711); +#207711 = CARTESIAN_POINT('',(111.779597,-77.093571,1.585)); +#207712 = LINE('',#207713,#207714); +#207713 = CARTESIAN_POINT('',(112.679597,-77.093571,1.585)); +#207714 = VECTOR('',#207715,1.); +#207715 = DIRECTION('',(-1.,0.,0.)); +#207716 = ORIENTED_EDGE('',*,*,#207717,.T.); +#207717 = EDGE_CURVE('',#207710,#207718,#207720,.T.); +#207718 = VERTEX_POINT('',#207719); +#207719 = CARTESIAN_POINT('',(111.779597,-76.963571,1.585)); +#207720 = CIRCLE('',#207721,6.500000000091E-02); +#207721 = AXIS2_PLACEMENT_3D('',#207722,#207723,#207724); +#207722 = CARTESIAN_POINT('',(111.77959734486,-77.028571,1.585)); +#207723 = DIRECTION('',(0.,0.,-1.)); +#207724 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#207725 = ORIENTED_EDGE('',*,*,#207726,.T.); +#207726 = EDGE_CURVE('',#207718,#207727,#207729,.T.); +#207727 = VERTEX_POINT('',#207728); +#207728 = CARTESIAN_POINT('',(112.614597,-76.963571,1.585)); +#207729 = LINE('',#207730,#207731); +#207730 = CARTESIAN_POINT('',(111.779597,-76.963571,1.585)); +#207731 = VECTOR('',#207732,1.); +#207732 = DIRECTION('',(1.,0.,0.)); +#207733 = ORIENTED_EDGE('',*,*,#207734,.T.); +#207734 = EDGE_CURVE('',#207727,#207735,#207737,.T.); +#207735 = VERTEX_POINT('',#207736); +#207736 = CARTESIAN_POINT('',(112.614597,-76.599999,1.585)); +#207737 = LINE('',#207738,#207739); +#207738 = CARTESIAN_POINT('',(112.614597,-76.963571,1.585)); +#207739 = VECTOR('',#207740,1.); +#207740 = DIRECTION('',(0.,1.,0.)); +#207741 = ORIENTED_EDGE('',*,*,#207742,.T.); +#207742 = EDGE_CURVE('',#207735,#207682,#207743,.T.); +#207743 = LINE('',#207744,#207745); +#207744 = CARTESIAN_POINT('',(112.614597,-76.599999,1.585)); +#207745 = VECTOR('',#207746,1.); +#207746 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207747 = PLANE('',#207748); +#207748 = AXIS2_PLACEMENT_3D('',#207749,#207750,#207751); +#207749 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207750 = DIRECTION('',(0.,0.,1.)); +#207751 = DIRECTION('',(1.,0.,-0.)); +#207752 = SHELL_BASED_SURFACE_MODEL('',(#207753)); +#207753 = OPEN_SHELL('',(#207754)); +#207754 = ADVANCED_FACE('',(#207755),#207824,.T.); +#207755 = FACE_BOUND('',#207756,.F.); +#207756 = EDGE_LOOP('',(#207757,#207768,#207776,#207785,#207793,#207802, + #207810,#207818)); +#207757 = ORIENTED_EDGE('',*,*,#207758,.T.); +#207758 = EDGE_CURVE('',#207759,#207761,#207763,.T.); +#207759 = VERTEX_POINT('',#207760); +#207760 = CARTESIAN_POINT('',(115.159545,-76.575125,1.585)); +#207761 = VERTEX_POINT('',#207762); +#207762 = CARTESIAN_POINT('',(115.284597,-76.599999,1.585)); +#207763 = CIRCLE('',#207764,6.499988811648E-02); +#207764 = AXIS2_PLACEMENT_3D('',#207765,#207766,#207767); +#207765 = CARTESIAN_POINT('',(115.21959711188,-76.5999992701,1.585)); +#207766 = DIRECTION('',(0.,0.,-1.)); +#207767 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207768 = ORIENTED_EDGE('',*,*,#207769,.T.); +#207769 = EDGE_CURVE('',#207761,#207770,#207772,.T.); +#207770 = VERTEX_POINT('',#207771); +#207771 = CARTESIAN_POINT('',(115.284597,-77.028571,1.585)); +#207772 = LINE('',#207773,#207774); +#207773 = CARTESIAN_POINT('',(115.284597,-76.599999,1.585)); +#207774 = VECTOR('',#207775,1.); +#207775 = DIRECTION('',(0.,-1.,0.)); +#207776 = ORIENTED_EDGE('',*,*,#207777,.T.); +#207777 = EDGE_CURVE('',#207770,#207778,#207780,.T.); +#207778 = VERTEX_POINT('',#207779); +#207779 = CARTESIAN_POINT('',(115.219597,-77.093571,1.585)); +#207780 = CIRCLE('',#207781,6.500103935388E-02); +#207781 = AXIS2_PLACEMENT_3D('',#207782,#207783,#207784); +#207782 = CARTESIAN_POINT('',(115.21959596065,-77.02856996065,1.585)); +#207783 = DIRECTION('',(0.,0.,-1.)); +#207784 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#207785 = ORIENTED_EDGE('',*,*,#207786,.T.); +#207786 = EDGE_CURVE('',#207778,#207787,#207789,.T.); +#207787 = VERTEX_POINT('',#207788); +#207788 = CARTESIAN_POINT('',(114.319597,-77.093571,1.585)); +#207789 = LINE('',#207790,#207791); +#207790 = CARTESIAN_POINT('',(115.219597,-77.093571,1.585)); +#207791 = VECTOR('',#207792,1.); +#207792 = DIRECTION('',(-1.,0.,0.)); +#207793 = ORIENTED_EDGE('',*,*,#207794,.T.); +#207794 = EDGE_CURVE('',#207787,#207795,#207797,.T.); +#207795 = VERTEX_POINT('',#207796); +#207796 = CARTESIAN_POINT('',(114.319597,-76.963571,1.585)); +#207797 = CIRCLE('',#207798,6.500000000091E-02); +#207798 = AXIS2_PLACEMENT_3D('',#207799,#207800,#207801); +#207799 = CARTESIAN_POINT('',(114.31959734486,-77.028571,1.585)); +#207800 = DIRECTION('',(0.,0.,-1.)); +#207801 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#207802 = ORIENTED_EDGE('',*,*,#207803,.T.); +#207803 = EDGE_CURVE('',#207795,#207804,#207806,.T.); +#207804 = VERTEX_POINT('',#207805); +#207805 = CARTESIAN_POINT('',(115.154597,-76.963571,1.585)); +#207806 = LINE('',#207807,#207808); +#207807 = CARTESIAN_POINT('',(114.319597,-76.963571,1.585)); +#207808 = VECTOR('',#207809,1.); +#207809 = DIRECTION('',(1.,0.,0.)); +#207810 = ORIENTED_EDGE('',*,*,#207811,.T.); +#207811 = EDGE_CURVE('',#207804,#207812,#207814,.T.); +#207812 = VERTEX_POINT('',#207813); +#207813 = CARTESIAN_POINT('',(115.154597,-76.599999,1.585)); +#207814 = LINE('',#207815,#207816); +#207815 = CARTESIAN_POINT('',(115.154597,-76.963571,1.585)); +#207816 = VECTOR('',#207817,1.); +#207817 = DIRECTION('',(0.,1.,0.)); +#207818 = ORIENTED_EDGE('',*,*,#207819,.T.); +#207819 = EDGE_CURVE('',#207812,#207759,#207820,.T.); +#207820 = LINE('',#207821,#207822); +#207821 = CARTESIAN_POINT('',(115.154597,-76.599999,1.585)); +#207822 = VECTOR('',#207823,1.); +#207823 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207824 = PLANE('',#207825); +#207825 = AXIS2_PLACEMENT_3D('',#207826,#207827,#207828); +#207826 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207827 = DIRECTION('',(0.,0.,1.)); +#207828 = DIRECTION('',(1.,0.,-0.)); +#207829 = SHELL_BASED_SURFACE_MODEL('',(#207830)); +#207830 = OPEN_SHELL('',(#207831)); +#207831 = ADVANCED_FACE('',(#207832),#207909,.T.); +#207832 = FACE_BOUND('',#207833,.F.); +#207833 = EDGE_LOOP('',(#207834,#207845,#207853,#207861,#207870,#207878, + #207886,#207895,#207903)); +#207834 = ORIENTED_EDGE('',*,*,#207835,.T.); +#207835 = EDGE_CURVE('',#207836,#207838,#207840,.T.); +#207836 = VERTEX_POINT('',#207837); +#207837 = CARTESIAN_POINT('',(119.299545,-76.467983,1.585)); +#207838 = VERTEX_POINT('',#207839); +#207839 = CARTESIAN_POINT('',(119.424597,-76.492857,1.585)); +#207840 = CIRCLE('',#207841,6.499988811649E-02); +#207841 = AXIS2_PLACEMENT_3D('',#207842,#207843,#207844); +#207842 = CARTESIAN_POINT('',(119.35959711188,-76.4928572701,1.585)); +#207843 = DIRECTION('',(0.,0.,-1.)); +#207844 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#207845 = ORIENTED_EDGE('',*,*,#207846,.T.); +#207846 = EDGE_CURVE('',#207838,#207847,#207849,.T.); +#207847 = VERTEX_POINT('',#207848); +#207848 = CARTESIAN_POINT('',(119.424597,-76.684999,1.585)); +#207849 = LINE('',#207850,#207851); +#207850 = CARTESIAN_POINT('',(119.424597,-76.492857,1.585)); +#207851 = VECTOR('',#207852,1.); +#207852 = DIRECTION('',(0.,-1.,0.)); +#207853 = ORIENTED_EDGE('',*,*,#207854,.T.); +#207854 = EDGE_CURVE('',#207847,#207855,#207857,.T.); +#207855 = VERTEX_POINT('',#207856); +#207856 = CARTESIAN_POINT('',(120.259597,-76.684999,1.585)); +#207857 = LINE('',#207858,#207859); +#207858 = CARTESIAN_POINT('',(119.424597,-76.684999,1.585)); +#207859 = VECTOR('',#207860,1.); +#207860 = DIRECTION('',(1.,0.,0.)); +#207861 = ORIENTED_EDGE('',*,*,#207862,.T.); +#207862 = EDGE_CURVE('',#207855,#207863,#207865,.T.); +#207863 = VERTEX_POINT('',#207864); +#207864 = CARTESIAN_POINT('',(120.259597,-76.814999,1.585)); +#207865 = CIRCLE('',#207866,6.500000000091E-02); +#207866 = AXIS2_PLACEMENT_3D('',#207867,#207868,#207869); +#207867 = CARTESIAN_POINT('',(120.25959665513,-76.749999,1.585)); +#207868 = DIRECTION('',(0.,0.,-1.)); +#207869 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#207870 = ORIENTED_EDGE('',*,*,#207871,.T.); +#207871 = EDGE_CURVE('',#207863,#207872,#207874,.T.); +#207872 = VERTEX_POINT('',#207873); +#207873 = CARTESIAN_POINT('',(119.424597,-76.814999,1.585)); +#207874 = LINE('',#207875,#207876); +#207875 = CARTESIAN_POINT('',(120.259597,-76.814999,1.585)); +#207876 = VECTOR('',#207877,1.); +#207877 = DIRECTION('',(-1.,0.,0.)); +#207878 = ORIENTED_EDGE('',*,*,#207879,.T.); +#207879 = EDGE_CURVE('',#207872,#207880,#207882,.T.); +#207880 = VERTEX_POINT('',#207881); +#207881 = CARTESIAN_POINT('',(119.424597,-77.007142,1.585)); +#207882 = LINE('',#207883,#207884); +#207883 = CARTESIAN_POINT('',(119.424597,-76.814999,1.585)); +#207884 = VECTOR('',#207885,1.); +#207885 = DIRECTION('',(0.,-1.,0.)); +#207886 = ORIENTED_EDGE('',*,*,#207887,.T.); +#207887 = EDGE_CURVE('',#207880,#207888,#207890,.T.); +#207888 = VERTEX_POINT('',#207889); +#207889 = CARTESIAN_POINT('',(119.294597,-77.007142,1.585)); +#207890 = CIRCLE('',#207891,6.500000000092E-02); +#207891 = AXIS2_PLACEMENT_3D('',#207892,#207893,#207894); +#207892 = CARTESIAN_POINT('',(119.359597,-77.00714165513,1.585)); +#207893 = DIRECTION('',(-0.,0.,-1.)); +#207894 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#207895 = ORIENTED_EDGE('',*,*,#207896,.T.); +#207896 = EDGE_CURVE('',#207888,#207897,#207899,.T.); +#207897 = VERTEX_POINT('',#207898); +#207898 = CARTESIAN_POINT('',(119.294597,-76.492857,1.585)); +#207899 = LINE('',#207900,#207901); +#207900 = CARTESIAN_POINT('',(119.294597,-77.007142,1.585)); +#207901 = VECTOR('',#207902,1.); +#207902 = DIRECTION('',(0.,1.,0.)); +#207903 = ORIENTED_EDGE('',*,*,#207904,.T.); +#207904 = EDGE_CURVE('',#207897,#207836,#207905,.T.); +#207905 = LINE('',#207906,#207907); +#207906 = CARTESIAN_POINT('',(119.294597,-76.492857,1.585)); +#207907 = VECTOR('',#207908,1.); +#207908 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#207909 = PLANE('',#207910); +#207910 = AXIS2_PLACEMENT_3D('',#207911,#207912,#207913); +#207911 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207912 = DIRECTION('',(0.,0.,1.)); +#207913 = DIRECTION('',(1.,0.,-0.)); +#207914 = SHELL_BASED_SURFACE_MODEL('',(#207915)); +#207915 = OPEN_SHELL('',(#207916)); +#207916 = ADVANCED_FACE('',(#207917),#207994,.T.); +#207917 = FACE_BOUND('',#207918,.F.); +#207918 = EDGE_LOOP('',(#207919,#207930,#207938,#207947,#207955,#207964, + #207972,#207980,#207988)); +#207919 = ORIENTED_EDGE('',*,*,#207920,.T.); +#207920 = EDGE_CURVE('',#207921,#207923,#207925,.T.); +#207921 = VERTEX_POINT('',#207922); +#207922 = CARTESIAN_POINT('',(149.814761,-76.176035,1.585)); +#207923 = VERTEX_POINT('',#207924); +#207924 = CARTESIAN_POINT('',(149.900152,-76.109764,1.585)); +#207925 = CIRCLE('',#207926,6.499990070435E-02); +#207926 = AXIS2_PLACEMENT_3D('',#207927,#207928,#207929); +#207927 = CARTESIAN_POINT('',(149.87959745813,-76.17142839734,1.585)); +#207928 = DIRECTION('',(0.,0.,-1.)); +#207929 = DIRECTION('',(-0.997485495103,-7.087091829067E-02,-0.)); +#207930 = ORIENTED_EDGE('',*,*,#207931,.T.); +#207931 = EDGE_CURVE('',#207923,#207932,#207934,.T.); +#207932 = VERTEX_POINT('',#207933); +#207933 = CARTESIAN_POINT('',(150.800152,-76.409763,1.585)); +#207934 = LINE('',#207935,#207936); +#207935 = CARTESIAN_POINT('',(149.900152,-76.109764,1.585)); +#207936 = VECTOR('',#207937,1.); +#207937 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#207938 = ORIENTED_EDGE('',*,*,#207939,.T.); +#207939 = EDGE_CURVE('',#207932,#207940,#207942,.T.); +#207940 = VERTEX_POINT('',#207941); +#207941 = CARTESIAN_POINT('',(150.800152,-76.533093,1.585)); +#207942 = CIRCLE('',#207943,6.500111611216E-02); +#207943 = AXIS2_PLACEMENT_3D('',#207944,#207945,#207946); +#207944 = CARTESIAN_POINT('',(150.77959542268,-76.471428,1.585)); +#207945 = DIRECTION('',(0.,0.,-1.)); +#207946 = DIRECTION('',(0.316249605277,0.948676018018,0.)); +#207947 = ORIENTED_EDGE('',*,*,#207948,.T.); +#207948 = EDGE_CURVE('',#207940,#207949,#207951,.T.); +#207949 = VERTEX_POINT('',#207950); +#207950 = CARTESIAN_POINT('',(149.900152,-76.833092,1.585)); +#207951 = LINE('',#207952,#207953); +#207952 = CARTESIAN_POINT('',(150.800152,-76.533093,1.585)); +#207953 = VECTOR('',#207954,1.); +#207954 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#207955 = ORIENTED_EDGE('',*,*,#207956,.T.); +#207956 = EDGE_CURVE('',#207949,#207957,#207959,.T.); +#207957 = VERTEX_POINT('',#207958); +#207958 = CARTESIAN_POINT('',(149.859042,-76.709764,1.585)); +#207959 = CIRCLE('',#207960,6.499966862237E-02); +#207960 = AXIS2_PLACEMENT_3D('',#207961,#207962,#207963); +#207961 = CARTESIAN_POINT('',(149.87959712923,-76.77142795692,1.585)); +#207962 = DIRECTION('',(0.,0.,-1.)); +#207963 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#207964 = ORIENTED_EDGE('',*,*,#207965,.T.); +#207965 = EDGE_CURVE('',#207957,#207966,#207968,.T.); +#207966 = VERTEX_POINT('',#207967); +#207967 = CARTESIAN_POINT('',(150.57405,-76.471428,1.585)); +#207968 = LINE('',#207969,#207970); +#207969 = CARTESIAN_POINT('',(149.859042,-76.709764,1.585)); +#207970 = VECTOR('',#207971,1.); +#207971 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#207972 = ORIENTED_EDGE('',*,*,#207973,.T.); +#207973 = EDGE_CURVE('',#207966,#207974,#207976,.T.); +#207974 = VERTEX_POINT('',#207975); +#207975 = CARTESIAN_POINT('',(149.859042,-76.233092,1.585)); +#207976 = LINE('',#207977,#207978); +#207977 = CARTESIAN_POINT('',(150.57405,-76.471428,1.585)); +#207978 = VECTOR('',#207979,1.); +#207979 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#207980 = ORIENTED_EDGE('',*,*,#207981,.T.); +#207981 = EDGE_CURVE('',#207974,#207982,#207984,.T.); +#207982 = VERTEX_POINT('',#207983); +#207983 = CARTESIAN_POINT('',(149.837009,-76.220532,1.585)); +#207984 = LINE('',#207985,#207986); +#207985 = CARTESIAN_POINT('',(149.859042,-76.233092,1.585)); +#207986 = VECTOR('',#207987,1.); +#207987 = DIRECTION('',(-0.868757082859,0.495238458707,0.)); +#207988 = ORIENTED_EDGE('',*,*,#207989,.T.); +#207989 = EDGE_CURVE('',#207982,#207921,#207990,.T.); +#207990 = LINE('',#207991,#207992); +#207991 = CARTESIAN_POINT('',(149.837009,-76.220532,1.585)); +#207992 = VECTOR('',#207993,1.); +#207993 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#207994 = PLANE('',#207995); +#207995 = AXIS2_PLACEMENT_3D('',#207996,#207997,#207998); +#207996 = CARTESIAN_POINT('',(0.,0.,1.585)); +#207997 = DIRECTION('',(0.,0.,1.)); +#207998 = DIRECTION('',(1.,0.,-0.)); +#207999 = SHELL_BASED_SURFACE_MODEL('',(#208000)); +#208000 = OPEN_SHELL('',(#208001)); +#208001 = ADVANCED_FACE('',(#208002,#208169),#208237,.T.); +#208002 = FACE_BOUND('',#208003,.F.); +#208003 = EDGE_LOOP('',(#208004,#208015,#208023,#208031,#208039,#208047, + #208055,#208063,#208071,#208079,#208088,#208096,#208104,#208113, + #208121,#208130,#208138,#208146,#208154,#208163)); +#208004 = ORIENTED_EDGE('',*,*,#208005,.T.); +#208005 = EDGE_CURVE('',#208006,#208008,#208010,.T.); +#208006 = VERTEX_POINT('',#208007); +#208007 = CARTESIAN_POINT('',(101.318122,-75.711919,1.585)); +#208008 = VERTEX_POINT('',#208009); +#208009 = CARTESIAN_POINT('',(101.566303,-75.467693,1.585)); +#208010 = CIRCLE('',#208011,0.3486213829); +#208011 = AXIS2_PLACEMENT_3D('',#208012,#208013,#208014); +#208012 = CARTESIAN_POINT('',(101.65406322951,-75.80508744383,1.585)); +#208013 = DIRECTION('',(0.,0.,-1.)); +#208014 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#208015 = ORIENTED_EDGE('',*,*,#208016,.T.); +#208016 = EDGE_CURVE('',#208008,#208017,#208019,.T.); +#208017 = VERTEX_POINT('',#208018); +#208018 = CARTESIAN_POINT('',(101.786043,-75.467693,1.585)); +#208019 = LINE('',#208020,#208021); +#208020 = CARTESIAN_POINT('',(101.566303,-75.467693,1.585)); +#208021 = VECTOR('',#208022,1.); +#208022 = DIRECTION('',(1.,0.,0.)); +#208023 = ORIENTED_EDGE('',*,*,#208024,.T.); +#208024 = EDGE_CURVE('',#208017,#208025,#208027,.T.); +#208025 = VERTEX_POINT('',#208026); +#208026 = CARTESIAN_POINT('',(101.821452,-75.48242,1.585)); +#208027 = LINE('',#208028,#208029); +#208028 = CARTESIAN_POINT('',(101.786043,-75.467693,1.585)); +#208029 = VECTOR('',#208030,1.); +#208030 = DIRECTION('',(0.923324376396,-0.3840209577,0.)); +#208031 = ORIENTED_EDGE('',*,*,#208032,.T.); +#208032 = EDGE_CURVE('',#208025,#208033,#208035,.T.); +#208033 = VERTEX_POINT('',#208034); +#208034 = CARTESIAN_POINT('',(101.829332,-75.478623,1.585)); +#208035 = LINE('',#208036,#208037); +#208036 = CARTESIAN_POINT('',(101.821452,-75.48242,1.585)); +#208037 = VECTOR('',#208038,1.); +#208038 = DIRECTION('',(0.900870882227,0.434087149724,0.)); +#208039 = ORIENTED_EDGE('',*,*,#208040,.T.); +#208040 = EDGE_CURVE('',#208033,#208041,#208043,.T.); +#208041 = VERTEX_POINT('',#208042); +#208042 = CARTESIAN_POINT('',(101.829332,-75.514564,1.585)); +#208043 = LINE('',#208044,#208045); +#208044 = CARTESIAN_POINT('',(101.829332,-75.478623,1.585)); +#208045 = VECTOR('',#208046,1.); +#208046 = DIRECTION('',(0.,-1.,0.)); +#208047 = ORIENTED_EDGE('',*,*,#208048,.T.); +#208048 = EDGE_CURVE('',#208041,#208049,#208051,.T.); +#208049 = VERTEX_POINT('',#208050); +#208050 = CARTESIAN_POINT('',(101.85173,-75.568636,1.585)); +#208051 = LINE('',#208052,#208053); +#208052 = CARTESIAN_POINT('',(101.829332,-75.514564,1.585)); +#208053 = VECTOR('',#208054,1.); +#208054 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208055 = ORIENTED_EDGE('',*,*,#208056,.T.); +#208056 = EDGE_CURVE('',#208049,#208057,#208059,.T.); +#208057 = VERTEX_POINT('',#208058); +#208058 = CARTESIAN_POINT('',(101.893114,-75.61002,1.585)); +#208059 = LINE('',#208060,#208061); +#208060 = CARTESIAN_POINT('',(101.85173,-75.568636,1.585)); +#208061 = VECTOR('',#208062,1.); +#208062 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#208063 = ORIENTED_EDGE('',*,*,#208064,.T.); +#208064 = EDGE_CURVE('',#208057,#208065,#208067,.T.); +#208065 = VERTEX_POINT('',#208066); +#208066 = CARTESIAN_POINT('',(101.941364,-75.630006,1.585)); +#208067 = LINE('',#208068,#208069); +#208068 = CARTESIAN_POINT('',(101.893114,-75.61002,1.585)); +#208069 = VECTOR('',#208070,1.); +#208070 = DIRECTION('',(0.923878208238,-0.382686629427,0.)); +#208071 = ORIENTED_EDGE('',*,*,#208072,.T.); +#208072 = EDGE_CURVE('',#208065,#208073,#208075,.T.); +#208073 = VERTEX_POINT('',#208074); +#208074 = CARTESIAN_POINT('',(101.938986,-76.370586,1.585)); +#208075 = LINE('',#208076,#208077); +#208076 = CARTESIAN_POINT('',(101.941364,-75.630006,1.585)); +#208077 = VECTOR('',#208078,1.); +#208078 = DIRECTION('',(-3.21098023293E-03,-0.99999484479,0.)); +#208079 = ORIENTED_EDGE('',*,*,#208080,.T.); +#208080 = EDGE_CURVE('',#208073,#208081,#208083,.T.); +#208081 = VERTEX_POINT('',#208082); +#208082 = CARTESIAN_POINT('',(101.690805,-76.614811,1.585)); +#208083 = CIRCLE('',#208084,0.348632345849); +#208084 = AXIS2_PLACEMENT_3D('',#208085,#208086,#208087); +#208085 = CARTESIAN_POINT('',(101.60303619403,-76.2774074593,1.585)); +#208086 = DIRECTION('',(0.,0.,-1.)); +#208087 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#208088 = ORIENTED_EDGE('',*,*,#208089,.T.); +#208089 = EDGE_CURVE('',#208081,#208090,#208092,.T.); +#208090 = VERTEX_POINT('',#208091); +#208091 = CARTESIAN_POINT('',(101.513506,-76.613589,1.585)); +#208092 = LINE('',#208093,#208094); +#208093 = CARTESIAN_POINT('',(101.690805,-76.614811,1.585)); +#208094 = VECTOR('',#208095,1.); +#208095 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#208096 = ORIENTED_EDGE('',*,*,#208097,.T.); +#208097 = EDGE_CURVE('',#208090,#208098,#208100,.T.); +#208098 = VERTEX_POINT('',#208099); +#208099 = CARTESIAN_POINT('',(101.392094,-76.552883,1.585)); +#208100 = LINE('',#208101,#208102); +#208101 = CARTESIAN_POINT('',(101.513506,-76.613589,1.585)); +#208102 = VECTOR('',#208103,1.); +#208103 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#208104 = ORIENTED_EDGE('',*,*,#208105,.T.); +#208105 = EDGE_CURVE('',#208098,#208106,#208108,.T.); +#208106 = VERTEX_POINT('',#208107); +#208107 = CARTESIAN_POINT('',(101.471619,-76.426551,1.585)); +#208108 = CIRCLE('',#208109,7.500029440361E-02); +#208109 = AXIS2_PLACEMENT_3D('',#208110,#208111,#208112); +#208110 = CARTESIAN_POINT('',(101.43807794602,-76.49363335132,1.585)); +#208111 = DIRECTION('',(0.,0.,-1.)); +#208112 = DIRECTION('',(-0.613116873665,-0.789992214662,-0.)); +#208113 = ORIENTED_EDGE('',*,*,#208114,.T.); +#208114 = EDGE_CURVE('',#208106,#208115,#208117,.T.); +#208115 = VERTEX_POINT('',#208116); +#208116 = CARTESIAN_POINT('',(101.551021,-76.466252,1.585)); +#208117 = LINE('',#208118,#208119); +#208118 = CARTESIAN_POINT('',(101.471619,-76.426551,1.585)); +#208119 = VECTOR('',#208120,1.); +#208120 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#208121 = ORIENTED_EDGE('',*,*,#208122,.T.); +#208122 = EDGE_CURVE('',#208115,#208123,#208125,.T.); +#208123 = VERTEX_POINT('',#208124); +#208124 = CARTESIAN_POINT('',(101.757391,-76.401587,1.585)); +#208125 = CIRCLE('',#208126,0.197624884179); +#208126 = AXIS2_PLACEMENT_3D('',#208127,#208128,#208129); +#208127 = CARTESIAN_POINT('',(101.6047445,-76.27606950765,1.585)); +#208128 = DIRECTION('',(0.,0.,1.)); +#208129 = DIRECTION('',(-0.271845826618,-0.962340816213,0.)); +#208130 = ORIENTED_EDGE('',*,*,#208131,.T.); +#208131 = EDGE_CURVE('',#208123,#208132,#208134,.T.); +#208132 = VERTEX_POINT('',#208133); +#208133 = CARTESIAN_POINT('',(101.791649,-76.333071,1.585)); +#208134 = LINE('',#208135,#208136); +#208135 = CARTESIAN_POINT('',(101.757391,-76.401587,1.585)); +#208136 = VECTOR('',#208137,1.); +#208137 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#208138 = ORIENTED_EDGE('',*,*,#208139,.T.); +#208139 = EDGE_CURVE('',#208132,#208140,#208142,.T.); +#208140 = VERTEX_POINT('',#208141); +#208141 = CARTESIAN_POINT('',(101.79122,-76.280256,1.585)); +#208142 = LINE('',#208143,#208144); +#208143 = CARTESIAN_POINT('',(101.791649,-76.333071,1.585)); +#208144 = VECTOR('',#208145,1.); +#208145 = DIRECTION('',(-8.122424470358E-03,0.999967012566,0.)); +#208146 = ORIENTED_EDGE('',*,*,#208147,.T.); +#208147 = EDGE_CURVE('',#208140,#208148,#208150,.T.); +#208148 = VERTEX_POINT('',#208149); +#208149 = CARTESIAN_POINT('',(101.561125,-76.280256,1.585)); +#208150 = LINE('',#208151,#208152); +#208151 = CARTESIAN_POINT('',(101.79122,-76.280256,1.585)); +#208152 = VECTOR('',#208153,1.); +#208153 = DIRECTION('',(-1.,0.,0.)); +#208154 = ORIENTED_EDGE('',*,*,#208155,.T.); +#208155 = EDGE_CURVE('',#208148,#208156,#208158,.T.); +#208156 = VERTEX_POINT('',#208157); +#208157 = CARTESIAN_POINT('',(101.3169,-76.032074,1.585)); +#208158 = CIRCLE('',#208159,0.348628446662); +#208159 = AXIS2_PLACEMENT_3D('',#208160,#208161,#208162); +#208160 = CARTESIAN_POINT('',(101.65430061322,-75.94430942847,1.585)); +#208161 = DIRECTION('',(0.,0.,-1.)); +#208162 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#208163 = ORIENTED_EDGE('',*,*,#208164,.T.); +#208164 = EDGE_CURVE('',#208156,#208006,#208165,.T.); +#208165 = LINE('',#208166,#208167); +#208166 = CARTESIAN_POINT('',(101.3169,-76.032074,1.585)); +#208167 = VECTOR('',#208168,1.); +#208168 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#208169 = FACE_BOUND('',#208170,.F.); +#208170 = EDGE_LOOP('',(#208171,#208181,#208189,#208198,#208206,#208215, + #208223,#208231)); +#208171 = ORIENTED_EDGE('',*,*,#208172,.T.); +#208172 = EDGE_CURVE('',#208173,#208175,#208177,.T.); +#208173 = VERTEX_POINT('',#208174); +#208174 = CARTESIAN_POINT('',(101.791649,-75.635223,1.585)); +#208175 = VERTEX_POINT('',#208176); +#208176 = CARTESIAN_POINT('',(101.753706,-75.616252,1.585)); +#208177 = LINE('',#208178,#208179); +#208178 = CARTESIAN_POINT('',(101.791649,-75.635223,1.585)); +#208179 = VECTOR('',#208180,1.); +#208180 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#208181 = ORIENTED_EDGE('',*,*,#208182,.T.); +#208182 = EDGE_CURVE('',#208175,#208183,#208185,.T.); +#208183 = VERTEX_POINT('',#208184); +#208184 = CARTESIAN_POINT('',(101.59864,-75.616252,1.585)); +#208185 = LINE('',#208186,#208187); +#208186 = CARTESIAN_POINT('',(101.753706,-75.616252,1.585)); +#208187 = VECTOR('',#208188,1.); +#208188 = DIRECTION('',(-1.,0.,0.)); +#208189 = ORIENTED_EDGE('',*,*,#208190,.T.); +#208190 = EDGE_CURVE('',#208183,#208191,#208193,.T.); +#208191 = VERTEX_POINT('',#208192); +#208192 = CARTESIAN_POINT('',(101.465459,-75.749433,1.585)); +#208193 = CIRCLE('',#208194,0.18686440374); +#208194 = AXIS2_PLACEMENT_3D('',#208195,#208196,#208197); +#208195 = CARTESIAN_POINT('',(101.646176,-75.796969,1.585)); +#208196 = DIRECTION('',(0.,0.,1.)); +#208197 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#208198 = ORIENTED_EDGE('',*,*,#208199,.T.); +#208199 = EDGE_CURVE('',#208191,#208200,#208202,.T.); +#208200 = VERTEX_POINT('',#208201); +#208201 = CARTESIAN_POINT('',(101.465459,-75.999737,1.585)); +#208202 = LINE('',#208203,#208204); +#208203 = CARTESIAN_POINT('',(101.465459,-75.749433,1.585)); +#208204 = VECTOR('',#208205,1.); +#208205 = DIRECTION('',(0.,-1.,0.)); +#208206 = ORIENTED_EDGE('',*,*,#208207,.T.); +#208207 = EDGE_CURVE('',#208200,#208208,#208210,.T.); +#208208 = VERTEX_POINT('',#208209); +#208209 = CARTESIAN_POINT('',(101.59864,-76.132919,1.585)); +#208210 = CIRCLE('',#208211,0.186867373533); +#208211 = AXIS2_PLACEMENT_3D('',#208212,#208213,#208214); +#208212 = CARTESIAN_POINT('',(101.64617871388,-75.95219964305,1.585)); +#208213 = DIRECTION('',(0.,0.,1.)); +#208214 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#208215 = ORIENTED_EDGE('',*,*,#208216,.T.); +#208216 = EDGE_CURVE('',#208208,#208217,#208219,.T.); +#208217 = VERTEX_POINT('',#208218); +#208218 = CARTESIAN_POINT('',(101.753706,-76.132919,1.585)); +#208219 = LINE('',#208220,#208221); +#208220 = CARTESIAN_POINT('',(101.59864,-76.132919,1.585)); +#208221 = VECTOR('',#208222,1.); +#208222 = DIRECTION('',(1.,0.,0.)); +#208223 = ORIENTED_EDGE('',*,*,#208224,.T.); +#208224 = EDGE_CURVE('',#208217,#208225,#208227,.T.); +#208225 = VERTEX_POINT('',#208226); +#208226 = CARTESIAN_POINT('',(101.791649,-76.113947,1.585)); +#208227 = LINE('',#208228,#208229); +#208228 = CARTESIAN_POINT('',(101.753706,-76.132919,1.585)); +#208229 = VECTOR('',#208230,1.); +#208230 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#208231 = ORIENTED_EDGE('',*,*,#208232,.T.); +#208232 = EDGE_CURVE('',#208225,#208173,#208233,.T.); +#208233 = LINE('',#208234,#208235); +#208234 = CARTESIAN_POINT('',(101.791649,-76.113947,1.585)); +#208235 = VECTOR('',#208236,1.); +#208236 = DIRECTION('',(0.,1.,0.)); +#208237 = PLANE('',#208238); +#208238 = AXIS2_PLACEMENT_3D('',#208239,#208240,#208241); +#208239 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208240 = DIRECTION('',(0.,0.,1.)); +#208241 = DIRECTION('',(1.,0.,-0.)); +#208242 = SHELL_BASED_SURFACE_MODEL('',(#208243)); +#208243 = OPEN_SHELL('',(#208244)); +#208244 = ADVANCED_FACE('',(#208245,#208314),#208340,.T.); +#208245 = FACE_BOUND('',#208246,.F.); +#208246 = EDGE_LOOP('',(#208247,#208258,#208266,#208275,#208283,#208291, + #208299,#208308)); +#208247 = ORIENTED_EDGE('',*,*,#208248,.T.); +#208248 = EDGE_CURVE('',#208249,#208251,#208253,.T.); +#208249 = VERTEX_POINT('',#208250); +#208250 = CARTESIAN_POINT('',(132.089042,-76.290235,1.585)); +#208251 = VERTEX_POINT('',#208252); +#208252 = CARTESIAN_POINT('',(132.089042,-76.166907,1.585)); +#208253 = CIRCLE('',#208254,6.499975994819E-02); +#208254 = AXIS2_PLACEMENT_3D('',#208255,#208256,#208257); +#208255 = CARTESIAN_POINT('',(132.10959728879,-76.228571,1.585)); +#208256 = DIRECTION('',(0.,0.,-1.)); +#208257 = DIRECTION('',(-0.316236380079,-0.948680426653,-0.)); +#208258 = ORIENTED_EDGE('',*,*,#208259,.T.); +#208259 = EDGE_CURVE('',#208251,#208260,#208262,.T.); +#208260 = VERTEX_POINT('',#208261); +#208261 = CARTESIAN_POINT('',(132.989042,-75.866907,1.585)); +#208262 = LINE('',#208263,#208264); +#208263 = CARTESIAN_POINT('',(132.089042,-76.166907,1.585)); +#208264 = VECTOR('',#208265,1.); +#208265 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#208266 = ORIENTED_EDGE('',*,*,#208267,.T.); +#208267 = EDGE_CURVE('',#208260,#208268,#208270,.T.); +#208268 = VERTEX_POINT('',#208269); +#208269 = CARTESIAN_POINT('',(133.030152,-75.990236,1.585)); +#208270 = CIRCLE('',#208271,6.500014296397E-02); +#208271 = AXIS2_PLACEMENT_3D('',#208272,#208273,#208274); +#208272 = CARTESIAN_POINT('',(133.00959672008,-75.9285715933,1.585)); +#208273 = DIRECTION('',(0.,0.,-1.)); +#208274 = DIRECTION('',(-0.316225767373,0.948683964263,-0.)); +#208275 = ORIENTED_EDGE('',*,*,#208276,.T.); +#208276 = EDGE_CURVE('',#208268,#208277,#208279,.T.); +#208277 = VERTEX_POINT('',#208278); +#208278 = CARTESIAN_POINT('',(132.817454,-76.061135,1.585)); +#208279 = LINE('',#208280,#208281); +#208280 = CARTESIAN_POINT('',(133.030152,-75.990236,1.585)); +#208281 = VECTOR('',#208282,1.); +#208282 = DIRECTION('',(-0.948683744073,-0.316226427945,0.)); +#208283 = ORIENTED_EDGE('',*,*,#208284,.T.); +#208284 = EDGE_CURVE('',#208277,#208285,#208287,.T.); +#208285 = VERTEX_POINT('',#208286); +#208286 = CARTESIAN_POINT('',(132.817454,-76.396006,1.585)); +#208287 = LINE('',#208288,#208289); +#208288 = CARTESIAN_POINT('',(132.817454,-76.061135,1.585)); +#208289 = VECTOR('',#208290,1.); +#208290 = DIRECTION('',(0.,-1.,0.)); +#208291 = ORIENTED_EDGE('',*,*,#208292,.T.); +#208292 = EDGE_CURVE('',#208285,#208293,#208295,.T.); +#208293 = VERTEX_POINT('',#208294); +#208294 = CARTESIAN_POINT('',(133.030152,-76.466906,1.585)); +#208295 = LINE('',#208296,#208297); +#208296 = CARTESIAN_POINT('',(132.817454,-76.396006,1.585)); +#208297 = VECTOR('',#208298,1.); +#208298 = DIRECTION('',(0.948682406,-0.316230442155,0.)); +#208299 = ORIENTED_EDGE('',*,*,#208300,.T.); +#208300 = EDGE_CURVE('',#208293,#208301,#208303,.T.); +#208301 = VERTEX_POINT('',#208302); +#208302 = CARTESIAN_POINT('',(132.989042,-76.590235,1.585)); +#208303 = CIRCLE('',#208304,6.500014296694E-02); +#208304 = AXIS2_PLACEMENT_3D('',#208305,#208306,#208307); +#208305 = CARTESIAN_POINT('',(133.00959634729,-76.52857028242,1.585)); +#208306 = DIRECTION('',(0.,0.,-1.)); +#208307 = DIRECTION('',(0.316240115321,0.948679181527,0.)); +#208308 = ORIENTED_EDGE('',*,*,#208309,.T.); +#208309 = EDGE_CURVE('',#208301,#208249,#208310,.T.); +#208310 = LINE('',#208311,#208312); +#208311 = CARTESIAN_POINT('',(132.989042,-76.590235,1.585)); +#208312 = VECTOR('',#208313,1.); +#208313 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#208314 = FACE_BOUND('',#208315,.F.); +#208315 = EDGE_LOOP('',(#208316,#208326,#208334)); +#208316 = ORIENTED_EDGE('',*,*,#208317,.T.); +#208317 = EDGE_CURVE('',#208318,#208320,#208322,.T.); +#208318 = VERTEX_POINT('',#208319); +#208319 = CARTESIAN_POINT('',(132.315144,-76.228571,1.585)); +#208320 = VERTEX_POINT('',#208321); +#208321 = CARTESIAN_POINT('',(132.687454,-76.352673,1.585)); +#208322 = LINE('',#208323,#208324); +#208323 = CARTESIAN_POINT('',(132.315144,-76.228571,1.585)); +#208324 = VECTOR('',#208325,1.); +#208325 = DIRECTION('',(0.948684317287,-0.316224708291,0.)); +#208326 = ORIENTED_EDGE('',*,*,#208327,.T.); +#208327 = EDGE_CURVE('',#208320,#208328,#208330,.T.); +#208328 = VERTEX_POINT('',#208329); +#208329 = CARTESIAN_POINT('',(132.687454,-76.104468,1.585)); +#208330 = LINE('',#208331,#208332); +#208331 = CARTESIAN_POINT('',(132.687454,-76.352673,1.585)); +#208332 = VECTOR('',#208333,1.); +#208333 = DIRECTION('',(0.,1.,0.)); +#208334 = ORIENTED_EDGE('',*,*,#208335,.T.); +#208335 = EDGE_CURVE('',#208328,#208318,#208336,.T.); +#208336 = LINE('',#208337,#208338); +#208337 = CARTESIAN_POINT('',(132.687454,-76.104468,1.585)); +#208338 = VECTOR('',#208339,1.); +#208339 = DIRECTION('',(-0.94868355286,-0.316227001586,0.)); +#208340 = PLANE('',#208341); +#208341 = AXIS2_PLACEMENT_3D('',#208342,#208343,#208344); +#208342 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208343 = DIRECTION('',(0.,0.,1.)); +#208344 = DIRECTION('',(1.,0.,-0.)); +#208345 = SHELL_BASED_SURFACE_MODEL('',(#208346)); +#208346 = OPEN_SHELL('',(#208347)); +#208347 = ADVANCED_FACE('',(#208348),#208425,.T.); +#208348 = FACE_BOUND('',#208349,.F.); +#208349 = EDGE_LOOP('',(#208350,#208361,#208369,#208377,#208386,#208394, + #208402,#208411,#208419)); +#208350 = ORIENTED_EDGE('',*,*,#208351,.T.); +#208351 = EDGE_CURVE('',#208352,#208354,#208356,.T.); +#208352 = VERTEX_POINT('',#208353); +#208353 = CARTESIAN_POINT('',(134.549545,-75.967983,1.585)); +#208354 = VERTEX_POINT('',#208355); +#208355 = CARTESIAN_POINT('',(134.674597,-75.992857,1.585)); +#208356 = CIRCLE('',#208357,6.499988811649E-02); +#208357 = AXIS2_PLACEMENT_3D('',#208358,#208359,#208360); +#208358 = CARTESIAN_POINT('',(134.60959711188,-75.9928572701,1.585)); +#208359 = DIRECTION('',(0.,0.,-1.)); +#208360 = DIRECTION('',(-0.923880234632,0.382681737293,0.)); +#208361 = ORIENTED_EDGE('',*,*,#208362,.T.); +#208362 = EDGE_CURVE('',#208354,#208363,#208365,.T.); +#208363 = VERTEX_POINT('',#208364); +#208364 = CARTESIAN_POINT('',(134.674597,-76.184999,1.585)); +#208365 = LINE('',#208366,#208367); +#208366 = CARTESIAN_POINT('',(134.674597,-75.992857,1.585)); +#208367 = VECTOR('',#208368,1.); +#208368 = DIRECTION('',(0.,-1.,0.)); +#208369 = ORIENTED_EDGE('',*,*,#208370,.T.); +#208370 = EDGE_CURVE('',#208363,#208371,#208373,.T.); +#208371 = VERTEX_POINT('',#208372); +#208372 = CARTESIAN_POINT('',(135.509597,-76.184999,1.585)); +#208373 = LINE('',#208374,#208375); +#208374 = CARTESIAN_POINT('',(134.674597,-76.184999,1.585)); +#208375 = VECTOR('',#208376,1.); +#208376 = DIRECTION('',(1.,0.,0.)); +#208377 = ORIENTED_EDGE('',*,*,#208378,.T.); +#208378 = EDGE_CURVE('',#208371,#208379,#208381,.T.); +#208379 = VERTEX_POINT('',#208380); +#208380 = CARTESIAN_POINT('',(135.509597,-76.314999,1.585)); +#208381 = CIRCLE('',#208382,6.500000000091E-02); +#208382 = AXIS2_PLACEMENT_3D('',#208383,#208384,#208385); +#208383 = CARTESIAN_POINT('',(135.50959665513,-76.249999,1.585)); +#208384 = DIRECTION('',(0.,0.,-1.)); +#208385 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#208386 = ORIENTED_EDGE('',*,*,#208387,.T.); +#208387 = EDGE_CURVE('',#208379,#208388,#208390,.T.); +#208388 = VERTEX_POINT('',#208389); +#208389 = CARTESIAN_POINT('',(134.674597,-76.314999,1.585)); +#208390 = LINE('',#208391,#208392); +#208391 = CARTESIAN_POINT('',(135.509597,-76.314999,1.585)); +#208392 = VECTOR('',#208393,1.); +#208393 = DIRECTION('',(-1.,0.,0.)); +#208394 = ORIENTED_EDGE('',*,*,#208395,.T.); +#208395 = EDGE_CURVE('',#208388,#208396,#208398,.T.); +#208396 = VERTEX_POINT('',#208397); +#208397 = CARTESIAN_POINT('',(134.674597,-76.507142,1.585)); +#208398 = LINE('',#208399,#208400); +#208399 = CARTESIAN_POINT('',(134.674597,-76.314999,1.585)); +#208400 = VECTOR('',#208401,1.); +#208401 = DIRECTION('',(0.,-1.,0.)); +#208402 = ORIENTED_EDGE('',*,*,#208403,.T.); +#208403 = EDGE_CURVE('',#208396,#208404,#208406,.T.); +#208404 = VERTEX_POINT('',#208405); +#208405 = CARTESIAN_POINT('',(134.544597,-76.507142,1.585)); +#208406 = CIRCLE('',#208407,6.500000000091E-02); +#208407 = AXIS2_PLACEMENT_3D('',#208408,#208409,#208410); +#208408 = CARTESIAN_POINT('',(134.609597,-76.50714165513,1.585)); +#208409 = DIRECTION('',(-0.,0.,-1.)); +#208410 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#208411 = ORIENTED_EDGE('',*,*,#208412,.T.); +#208412 = EDGE_CURVE('',#208404,#208413,#208415,.T.); +#208413 = VERTEX_POINT('',#208414); +#208414 = CARTESIAN_POINT('',(134.544597,-75.992857,1.585)); +#208415 = LINE('',#208416,#208417); +#208416 = CARTESIAN_POINT('',(134.544597,-76.507142,1.585)); +#208417 = VECTOR('',#208418,1.); +#208418 = DIRECTION('',(0.,1.,0.)); +#208419 = ORIENTED_EDGE('',*,*,#208420,.T.); +#208420 = EDGE_CURVE('',#208413,#208352,#208421,.T.); +#208421 = LINE('',#208422,#208423); +#208422 = CARTESIAN_POINT('',(134.544597,-75.992857,1.585)); +#208423 = VECTOR('',#208424,1.); +#208424 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#208425 = PLANE('',#208426); +#208426 = AXIS2_PLACEMENT_3D('',#208427,#208428,#208429); +#208427 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208428 = DIRECTION('',(0.,0.,1.)); +#208429 = DIRECTION('',(1.,0.,-0.)); +#208430 = SHELL_BASED_SURFACE_MODEL('',(#208431)); +#208431 = OPEN_SHELL('',(#208432)); +#208432 = ADVANCED_FACE('',(#208433),#208592,.T.); +#208433 = FACE_BOUND('',#208434,.F.); +#208434 = EDGE_LOOP('',(#208435,#208445,#208453,#208461,#208469,#208477, + #208486,#208494,#208503,#208511,#208519,#208527,#208536,#208544, + #208552,#208560,#208569,#208577,#208586)); +#208435 = ORIENTED_EDGE('',*,*,#208436,.T.); +#208436 = EDGE_CURVE('',#208437,#208439,#208441,.T.); +#208437 = VERTEX_POINT('',#208438); +#208438 = CARTESIAN_POINT('',(109.288013,-75.819676,1.585)); +#208439 = VERTEX_POINT('',#208440); +#208440 = CARTESIAN_POINT('',(109.396368,-75.766486,1.585)); +#208441 = LINE('',#208442,#208443); +#208442 = CARTESIAN_POINT('',(109.288013,-75.819676,1.585)); +#208443 = VECTOR('',#208444,1.); +#208444 = DIRECTION('',(0.897675654444,0.440656804576,0.)); +#208445 = ORIENTED_EDGE('',*,*,#208446,.T.); +#208446 = EDGE_CURVE('',#208439,#208447,#208449,.T.); +#208447 = VERTEX_POINT('',#208448); +#208448 = CARTESIAN_POINT('',(109.506962,-75.765604,1.585)); +#208449 = LINE('',#208450,#208451); +#208450 = CARTESIAN_POINT('',(109.396368,-75.766486,1.585)); +#208451 = VECTOR('',#208452,1.); +#208452 = DIRECTION('',(0.999968200278,7.97486258431E-03,0.)); +#208453 = ORIENTED_EDGE('',*,*,#208454,.T.); +#208454 = EDGE_CURVE('',#208447,#208455,#208457,.T.); +#208455 = VERTEX_POINT('',#208456); +#208456 = CARTESIAN_POINT('',(109.658854,-75.817168,1.585)); +#208457 = LINE('',#208458,#208459); +#208458 = CARTESIAN_POINT('',(109.506962,-75.765604,1.585)); +#208459 = VECTOR('',#208460,1.); +#208460 = DIRECTION('',(0.946923272019,-0.321459666068,0.)); +#208461 = ORIENTED_EDGE('',*,*,#208462,.T.); +#208462 = EDGE_CURVE('',#208455,#208463,#208465,.T.); +#208463 = VERTEX_POINT('',#208464); +#208464 = CARTESIAN_POINT('',(110.074597,-76.22879,1.585)); +#208465 = LINE('',#208466,#208467); +#208466 = CARTESIAN_POINT('',(109.658854,-75.817168,1.585)); +#208467 = VECTOR('',#208468,1.); +#208468 = DIRECTION('',(0.710619975405,-0.703576044615,0.)); +#208469 = ORIENTED_EDGE('',*,*,#208470,.T.); +#208470 = EDGE_CURVE('',#208463,#208471,#208473,.T.); +#208471 = VERTEX_POINT('',#208472); +#208472 = CARTESIAN_POINT('',(110.074597,-75.828571,1.585)); +#208473 = LINE('',#208474,#208475); +#208474 = CARTESIAN_POINT('',(110.074597,-76.22879,1.585)); +#208475 = VECTOR('',#208476,1.); +#208476 = DIRECTION('',(0.,1.,0.)); +#208477 = ORIENTED_EDGE('',*,*,#208478,.T.); +#208478 = EDGE_CURVE('',#208471,#208479,#208481,.T.); +#208479 = VERTEX_POINT('',#208480); +#208480 = CARTESIAN_POINT('',(110.204597,-75.828571,1.585)); +#208481 = CIRCLE('',#208482,6.500000000092E-02); +#208482 = AXIS2_PLACEMENT_3D('',#208483,#208484,#208485); +#208483 = CARTESIAN_POINT('',(110.139597,-75.82857134486,1.585)); +#208484 = DIRECTION('',(0.,0.,-1.)); +#208485 = DIRECTION('',(-0.999999999986,5.305658025668E-06,0.)); +#208486 = ORIENTED_EDGE('',*,*,#208487,.T.); +#208487 = EDGE_CURVE('',#208479,#208488,#208490,.T.); +#208488 = VERTEX_POINT('',#208489); +#208489 = CARTESIAN_POINT('',(110.204597,-76.385714,1.585)); +#208490 = LINE('',#208491,#208492); +#208491 = CARTESIAN_POINT('',(110.204597,-75.828571,1.585)); +#208492 = VECTOR('',#208493,1.); +#208493 = DIRECTION('',(0.,-1.,0.)); +#208494 = ORIENTED_EDGE('',*,*,#208495,.T.); +#208495 = EDGE_CURVE('',#208488,#208496,#208498,.T.); +#208496 = VERTEX_POINT('',#208497); +#208497 = CARTESIAN_POINT('',(110.093635,-76.431676,1.585)); +#208498 = CIRCLE('',#208499,6.50002653555E-02); +#208499 = AXIS2_PLACEMENT_3D('',#208500,#208501,#208502); +#208500 = CARTESIAN_POINT('',(110.13959673464,-76.38571347782,1.585)); +#208501 = DIRECTION('',(-0.,0.,-1.)); +#208502 = DIRECTION('',(0.999999999968,-8.033407537946E-06,-0.)); +#208503 = ORIENTED_EDGE('',*,*,#208504,.T.); +#208504 = EDGE_CURVE('',#208496,#208505,#208507,.T.); +#208505 = VERTEX_POINT('',#208506); +#208506 = CARTESIAN_POINT('',(109.590198,-75.928239,1.585)); +#208507 = LINE('',#208508,#208509); +#208508 = CARTESIAN_POINT('',(110.093635,-76.431676,1.585)); +#208509 = VECTOR('',#208510,1.); +#208510 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208511 = ORIENTED_EDGE('',*,*,#208512,.T.); +#208512 = EDGE_CURVE('',#208505,#208513,#208515,.T.); +#208513 = VERTEX_POINT('',#208514); +#208514 = CARTESIAN_POINT('',(109.486193,-75.893571,1.585)); +#208515 = LINE('',#208516,#208517); +#208516 = CARTESIAN_POINT('',(109.590198,-75.928239,1.585)); +#208517 = VECTOR('',#208518,1.); +#208518 = DIRECTION('',(-0.948684210199,0.316225029558,0.)); +#208519 = ORIENTED_EDGE('',*,*,#208520,.T.); +#208520 = EDGE_CURVE('',#208513,#208521,#208523,.T.); +#208521 = VERTEX_POINT('',#208522); +#208522 = CARTESIAN_POINT('',(109.42637,-75.893571,1.585)); +#208523 = LINE('',#208524,#208525); +#208524 = CARTESIAN_POINT('',(109.486193,-75.893571,1.585)); +#208525 = VECTOR('',#208526,1.); +#208526 = DIRECTION('',(-1.,0.,0.)); +#208527 = ORIENTED_EDGE('',*,*,#208528,.T.); +#208528 = EDGE_CURVE('',#208521,#208529,#208531,.T.); +#208529 = VERTEX_POINT('',#208530); +#208530 = CARTESIAN_POINT('',(109.304597,-76.015345,1.585)); +#208531 = CIRCLE('',#208532,0.170996278941); +#208532 = AXIS2_PLACEMENT_3D('',#208533,#208534,#208535); +#208533 = CARTESIAN_POINT('',(109.46994764214,-76.05892128429,1.585)); +#208534 = DIRECTION('',(0.,0.,1.)); +#208535 = DIRECTION('',(-0.254845558146,0.966981768956,0.)); +#208536 = ORIENTED_EDGE('',*,*,#208537,.T.); +#208537 = EDGE_CURVE('',#208529,#208538,#208540,.T.); +#208538 = VERTEX_POINT('',#208539); +#208539 = CARTESIAN_POINT('',(109.304597,-76.198941,1.585)); +#208540 = LINE('',#208541,#208542); +#208541 = CARTESIAN_POINT('',(109.304597,-76.015345,1.585)); +#208542 = VECTOR('',#208543,1.); +#208543 = DIRECTION('',(0.,-1.,0.)); +#208544 = ORIENTED_EDGE('',*,*,#208545,.T.); +#208545 = EDGE_CURVE('',#208538,#208546,#208548,.T.); +#208546 = VERTEX_POINT('',#208547); +#208547 = CARTESIAN_POINT('',(109.335875,-76.261497,1.585)); +#208548 = LINE('',#208549,#208550); +#208549 = CARTESIAN_POINT('',(109.304597,-76.198941,1.585)); +#208550 = VECTOR('',#208551,1.); +#208551 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#208552 = ORIENTED_EDGE('',*,*,#208553,.T.); +#208553 = EDGE_CURVE('',#208546,#208554,#208556,.T.); +#208554 = VERTEX_POINT('',#208555); +#208555 = CARTESIAN_POINT('',(109.371273,-76.296895,1.585)); +#208556 = LINE('',#208557,#208558); +#208557 = CARTESIAN_POINT('',(109.335875,-76.261497,1.585)); +#208558 = VECTOR('',#208559,1.); +#208559 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#208560 = ORIENTED_EDGE('',*,*,#208561,.T.); +#208561 = EDGE_CURVE('',#208554,#208562,#208564,.T.); +#208562 = VERTEX_POINT('',#208563); +#208563 = CARTESIAN_POINT('',(109.279349,-76.388819,1.585)); +#208564 = CIRCLE('',#208565,6.50000837538E-02); +#208565 = AXIS2_PLACEMENT_3D('',#208566,#208567,#208568); +#208566 = CARTESIAN_POINT('',(109.32531098493,-76.34285698493,1.585)); +#208567 = DIRECTION('',(0.,0.,-1.)); +#208568 = DIRECTION('',(0.707107012969,0.707106549404,0.)); +#208569 = ORIENTED_EDGE('',*,*,#208570,.T.); +#208570 = EDGE_CURVE('',#208562,#208571,#208573,.T.); +#208571 = VERTEX_POINT('',#208572); +#208572 = CARTESIAN_POINT('',(109.224316,-76.329069,1.585)); +#208573 = LINE('',#208574,#208575); +#208574 = CARTESIAN_POINT('',(109.279349,-76.388819,1.585)); +#208575 = VECTOR('',#208576,1.); +#208576 = DIRECTION('',(-0.677476455829,0.735544459429,0.)); +#208577 = ORIENTED_EDGE('',*,*,#208578,.T.); +#208578 = EDGE_CURVE('',#208571,#208579,#208581,.T.); +#208579 = VERTEX_POINT('',#208580); +#208580 = CARTESIAN_POINT('',(109.230707,-75.876981,1.585)); +#208581 = CIRCLE('',#208582,0.40799528995); +#208582 = AXIS2_PLACEMENT_3D('',#208583,#208584,#208585); +#208583 = CARTESIAN_POINT('',(109.567115692,-76.10782585822,1.585)); +#208584 = DIRECTION('',(0.,0.,-1.)); +#208585 = DIRECTION('',(-0.840205023064,-0.542268862483,-0.)); +#208586 = ORIENTED_EDGE('',*,*,#208587,.T.); +#208587 = EDGE_CURVE('',#208579,#208437,#208588,.T.); +#208588 = LINE('',#208589,#208590); +#208589 = CARTESIAN_POINT('',(109.230707,-75.876981,1.585)); +#208590 = VECTOR('',#208591,1.); +#208591 = DIRECTION('',(0.707112950784,0.707100611536,0.)); +#208592 = PLANE('',#208593); +#208593 = AXIS2_PLACEMENT_3D('',#208594,#208595,#208596); +#208594 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208595 = DIRECTION('',(0.,0.,1.)); +#208596 = DIRECTION('',(1.,0.,-0.)); +#208597 = SHELL_BASED_SURFACE_MODEL('',(#208598)); +#208598 = OPEN_SHELL('',(#208599)); +#208599 = ADVANCED_FACE('',(#208600),#208786,.T.); +#208600 = FACE_BOUND('',#208601,.F.); +#208601 = EDGE_LOOP('',(#208602,#208613,#208621,#208629,#208637,#208645, + #208654,#208662,#208671,#208679,#208688,#208696,#208705,#208713, + #208721,#208729,#208738,#208746,#208754,#208763,#208771,#208780)); +#208602 = ORIENTED_EDGE('',*,*,#208603,.T.); +#208603 = EDGE_CURVE('',#208604,#208606,#208608,.T.); +#208604 = VERTEX_POINT('',#208605); +#208605 = CARTESIAN_POINT('',(112.060369,-75.985343,1.585)); +#208606 = VERTEX_POINT('',#208607); +#208607 = CARTESIAN_POINT('',(112.279225,-75.766486,1.585)); +#208608 = CIRCLE('',#208609,0.308109459502); +#208609 = AXIS2_PLACEMENT_3D('',#208610,#208611,#208612); +#208610 = CARTESIAN_POINT('',(112.35818845359,-76.06430509279,1.585)); +#208611 = DIRECTION('',(0.,0.,-1.)); +#208612 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#208613 = ORIENTED_EDGE('',*,*,#208614,.T.); +#208614 = EDGE_CURVE('',#208606,#208615,#208617,.T.); +#208615 = VERTEX_POINT('',#208616); +#208616 = CARTESIAN_POINT('',(112.511361,-75.764206,1.585)); +#208617 = LINE('',#208618,#208619); +#208618 = CARTESIAN_POINT('',(112.279225,-75.766486,1.585)); +#208619 = VECTOR('',#208620,1.); +#208620 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#208621 = ORIENTED_EDGE('',*,*,#208622,.T.); +#208622 = EDGE_CURVE('',#208615,#208623,#208625,.T.); +#208623 = VERTEX_POINT('',#208624); +#208624 = CARTESIAN_POINT('',(112.537237,-75.770433,1.585)); +#208625 = LINE('',#208626,#208627); +#208626 = CARTESIAN_POINT('',(112.511361,-75.764206,1.585)); +#208627 = VECTOR('',#208628,1.); +#208628 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#208629 = ORIENTED_EDGE('',*,*,#208630,.T.); +#208630 = EDGE_CURVE('',#208623,#208631,#208633,.T.); +#208631 = VERTEX_POINT('',#208632); +#208632 = CARTESIAN_POINT('',(112.639844,-75.825466,1.585)); +#208633 = LINE('',#208634,#208635); +#208634 = CARTESIAN_POINT('',(112.537237,-75.770433,1.585)); +#208635 = VECTOR('',#208636,1.); +#208636 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#208637 = ORIENTED_EDGE('',*,*,#208638,.T.); +#208638 = EDGE_CURVE('',#208631,#208639,#208641,.T.); +#208639 = VERTEX_POINT('',#208640); +#208640 = CARTESIAN_POINT('',(112.694878,-75.885217,1.585)); +#208641 = LINE('',#208642,#208643); +#208642 = CARTESIAN_POINT('',(112.639844,-75.825466,1.585)); +#208643 = VECTOR('',#208644,1.); +#208644 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#208645 = ORIENTED_EDGE('',*,*,#208646,.T.); +#208646 = EDGE_CURVE('',#208639,#208647,#208649,.T.); +#208647 = VERTEX_POINT('',#208648); +#208648 = CARTESIAN_POINT('',(112.688491,-76.380154,1.585)); +#208649 = CIRCLE('',#208650,0.457783772261); +#208650 = AXIS2_PLACEMENT_3D('',#208651,#208652,#208653); +#208651 = CARTESIAN_POINT('',(112.30659953493,-76.12771610455,1.585)); +#208652 = DIRECTION('',(0.,0.,-1.)); +#208653 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#208654 = ORIENTED_EDGE('',*,*,#208655,.T.); +#208655 = EDGE_CURVE('',#208647,#208656,#208658,.T.); +#208656 = VERTEX_POINT('',#208657); +#208657 = CARTESIAN_POINT('',(112.639843,-76.431676,1.585)); +#208658 = LINE('',#208659,#208660); +#208659 = CARTESIAN_POINT('',(112.688491,-76.380154,1.585)); +#208660 = VECTOR('',#208661,1.); +#208661 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#208662 = ORIENTED_EDGE('',*,*,#208663,.T.); +#208663 = EDGE_CURVE('',#208656,#208664,#208666,.T.); +#208664 = VERTEX_POINT('',#208665); +#208665 = CARTESIAN_POINT('',(112.547921,-76.339752,1.585)); +#208666 = CIRCLE('',#208667,6.499937665136E-02); +#208667 = AXIS2_PLACEMENT_3D('',#208668,#208669,#208670); +#208668 = CARTESIAN_POINT('',(112.59388218097,-76.38571381902,1.585)); +#208669 = DIRECTION('',(-0.,0.,-1.)); +#208670 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#208671 = ORIENTED_EDGE('',*,*,#208672,.T.); +#208672 = EDGE_CURVE('',#208664,#208673,#208675,.T.); +#208673 = VERTEX_POINT('',#208674); +#208674 = CARTESIAN_POINT('',(112.583319,-76.304354,1.585)); +#208675 = LINE('',#208676,#208677); +#208676 = CARTESIAN_POINT('',(112.547921,-76.339752,1.585)); +#208677 = VECTOR('',#208678,1.); +#208678 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#208679 = ORIENTED_EDGE('',*,*,#208680,.T.); +#208680 = EDGE_CURVE('',#208673,#208681,#208683,.T.); +#208681 = VERTEX_POINT('',#208682); +#208682 = CARTESIAN_POINT('',(112.583319,-75.952789,1.585)); +#208683 = CIRCLE('',#208684,0.325008683278); +#208684 = AXIS2_PLACEMENT_3D('',#208685,#208686,#208687); +#208685 = CARTESIAN_POINT('',(112.309949,-76.1285715,1.585)); +#208686 = DIRECTION('',(0.,-0.,1.)); +#208687 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#208688 = ORIENTED_EDGE('',*,*,#208689,.T.); +#208689 = EDGE_CURVE('',#208681,#208690,#208692,.T.); +#208690 = VERTEX_POINT('',#208691); +#208691 = CARTESIAN_POINT('',(112.555379,-75.924849,1.585)); +#208692 = LINE('',#208693,#208694); +#208693 = CARTESIAN_POINT('',(112.583319,-75.952789,1.585)); +#208694 = VECTOR('',#208695,1.); +#208695 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208696 = ORIENTED_EDGE('',*,*,#208697,.T.); +#208697 = EDGE_CURVE('',#208690,#208698,#208700,.T.); +#208698 = VERTEX_POINT('',#208699); +#208699 = CARTESIAN_POINT('',(112.246671,-75.924849,1.585)); +#208700 = CIRCLE('',#208701,0.277419178293); +#208701 = AXIS2_PLACEMENT_3D('',#208702,#208703,#208704); +#208702 = CARTESIAN_POINT('',(112.401025,-76.155362,1.585)); +#208703 = DIRECTION('',(0.,0.,1.)); +#208704 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#208705 = ORIENTED_EDGE('',*,*,#208706,.T.); +#208706 = EDGE_CURVE('',#208698,#208707,#208709,.T.); +#208707 = VERTEX_POINT('',#208708); +#208708 = CARTESIAN_POINT('',(112.218733,-75.952787,1.585)); +#208709 = LINE('',#208710,#208711); +#208710 = CARTESIAN_POINT('',(112.246671,-75.924849,1.585)); +#208711 = VECTOR('',#208712,1.); +#208712 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#208713 = ORIENTED_EDGE('',*,*,#208714,.T.); +#208714 = EDGE_CURVE('',#208707,#208715,#208717,.T.); +#208715 = VERTEX_POINT('',#208716); +#208716 = CARTESIAN_POINT('',(112.187454,-76.015345,1.585)); +#208717 = LINE('',#208718,#208719); +#208718 = CARTESIAN_POINT('',(112.218733,-75.952787,1.585)); +#208719 = VECTOR('',#208720,1.); +#208720 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#208721 = ORIENTED_EDGE('',*,*,#208722,.T.); +#208722 = EDGE_CURVE('',#208715,#208723,#208725,.T.); +#208723 = VERTEX_POINT('',#208724); +#208724 = CARTESIAN_POINT('',(112.187454,-76.128571,1.585)); +#208725 = LINE('',#208726,#208727); +#208726 = CARTESIAN_POINT('',(112.187454,-76.015345,1.585)); +#208727 = VECTOR('',#208728,1.); +#208728 = DIRECTION('',(0.,-1.,0.)); +#208729 = ORIENTED_EDGE('',*,*,#208730,.T.); +#208730 = EDGE_CURVE('',#208723,#208731,#208733,.T.); +#208731 = VERTEX_POINT('',#208732); +#208732 = CARTESIAN_POINT('',(112.079652,-76.177489,1.585)); +#208733 = CIRCLE('',#208734,6.500010429713E-02); +#208734 = AXIS2_PLACEMENT_3D('',#208735,#208736,#208737); +#208735 = CARTESIAN_POINT('',(112.1224538957,-76.12857058544,1.585)); +#208736 = DIRECTION('',(-0.,0.,-1.)); +#208737 = DIRECTION('',(0.99999999998,-6.377788786915E-06,-0.)); +#208738 = ORIENTED_EDGE('',*,*,#208739,.T.); +#208739 = EDGE_CURVE('',#208731,#208740,#208742,.T.); +#208740 = VERTEX_POINT('',#208741); +#208741 = CARTESIAN_POINT('',(111.844597,-75.971815,1.585)); +#208742 = LINE('',#208743,#208744); +#208743 = CARTESIAN_POINT('',(112.079652,-76.177489,1.585)); +#208744 = VECTOR('',#208745,1.); +#208745 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#208746 = ORIENTED_EDGE('',*,*,#208747,.T.); +#208747 = EDGE_CURVE('',#208740,#208748,#208750,.T.); +#208748 = VERTEX_POINT('',#208749); +#208749 = CARTESIAN_POINT('',(111.844597,-76.385714,1.585)); +#208750 = LINE('',#208751,#208752); +#208751 = CARTESIAN_POINT('',(111.844597,-75.971815,1.585)); +#208752 = VECTOR('',#208753,1.); +#208753 = DIRECTION('',(0.,-1.,0.)); +#208754 = ORIENTED_EDGE('',*,*,#208755,.T.); +#208755 = EDGE_CURVE('',#208748,#208756,#208758,.T.); +#208756 = VERTEX_POINT('',#208757); +#208757 = CARTESIAN_POINT('',(111.714597,-76.385714,1.585)); +#208758 = CIRCLE('',#208759,6.500000000091E-02); +#208759 = AXIS2_PLACEMENT_3D('',#208760,#208761,#208762); +#208760 = CARTESIAN_POINT('',(111.779597,-76.38571365513,1.585)); +#208761 = DIRECTION('',(-0.,0.,-1.)); +#208762 = DIRECTION('',(0.999999999986,-5.30565780704E-06,-0.)); +#208763 = ORIENTED_EDGE('',*,*,#208764,.T.); +#208764 = EDGE_CURVE('',#208756,#208765,#208767,.T.); +#208765 = VERTEX_POINT('',#208766); +#208766 = CARTESIAN_POINT('',(111.714597,-75.828571,1.585)); +#208767 = LINE('',#208768,#208769); +#208768 = CARTESIAN_POINT('',(111.714597,-76.385714,1.585)); +#208769 = VECTOR('',#208770,1.); +#208770 = DIRECTION('',(0.,1.,0.)); +#208771 = ORIENTED_EDGE('',*,*,#208772,.T.); +#208772 = EDGE_CURVE('',#208765,#208773,#208775,.T.); +#208773 = VERTEX_POINT('',#208774); +#208774 = CARTESIAN_POINT('',(111.8224,-75.779654,1.585)); +#208775 = CIRCLE('',#208776,6.500002288386E-02); +#208776 = AXIS2_PLACEMENT_3D('',#208777,#208778,#208779); +#208777 = CARTESIAN_POINT('',(111.77959702288,-75.82857136015,1.585)); +#208778 = DIRECTION('',(0.,0.,-1.)); +#208779 = DIRECTION('',(-0.999999999985,5.540887697237E-06,0.)); +#208780 = ORIENTED_EDGE('',*,*,#208781,.T.); +#208781 = EDGE_CURVE('',#208773,#208604,#208782,.T.); +#208782 = LINE('',#208783,#208784); +#208783 = CARTESIAN_POINT('',(111.8224,-75.779654,1.585)); +#208784 = VECTOR('',#208785,1.); +#208785 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#208786 = PLANE('',#208787); +#208787 = AXIS2_PLACEMENT_3D('',#208788,#208789,#208790); +#208788 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208789 = DIRECTION('',(0.,0.,1.)); +#208790 = DIRECTION('',(1.,0.,-0.)); +#208791 = SHELL_BASED_SURFACE_MODEL('',(#208792)); +#208792 = OPEN_SHELL('',(#208793)); +#208793 = ADVANCED_FACE('',(#208794),#208980,.T.); +#208794 = FACE_BOUND('',#208795,.F.); +#208795 = EDGE_LOOP('',(#208796,#208807,#208815,#208823,#208831,#208839, + #208848,#208856,#208865,#208873,#208882,#208890,#208899,#208907, + #208915,#208923,#208932,#208940,#208948,#208957,#208965,#208974)); +#208796 = ORIENTED_EDGE('',*,*,#208797,.T.); +#208797 = EDGE_CURVE('',#208798,#208800,#208802,.T.); +#208798 = VERTEX_POINT('',#208799); +#208799 = CARTESIAN_POINT('',(155.240369,-75.985342,1.585)); +#208800 = VERTEX_POINT('',#208801); +#208801 = CARTESIAN_POINT('',(155.459225,-75.766485,1.585)); +#208802 = CIRCLE('',#208803,0.308109459502); +#208803 = AXIS2_PLACEMENT_3D('',#208804,#208805,#208806); +#208804 = CARTESIAN_POINT('',(155.53818845359,-76.06430409279,1.585)); +#208805 = DIRECTION('',(0.,0.,-1.)); +#208806 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#208807 = ORIENTED_EDGE('',*,*,#208808,.T.); +#208808 = EDGE_CURVE('',#208800,#208809,#208811,.T.); +#208809 = VERTEX_POINT('',#208810); +#208810 = CARTESIAN_POINT('',(155.691361,-75.764205,1.585)); +#208811 = LINE('',#208812,#208813); +#208812 = CARTESIAN_POINT('',(155.459225,-75.766485,1.585)); +#208813 = VECTOR('',#208814,1.); +#208814 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#208815 = ORIENTED_EDGE('',*,*,#208816,.T.); +#208816 = EDGE_CURVE('',#208809,#208817,#208819,.T.); +#208817 = VERTEX_POINT('',#208818); +#208818 = CARTESIAN_POINT('',(155.717237,-75.770432,1.585)); +#208819 = LINE('',#208820,#208821); +#208820 = CARTESIAN_POINT('',(155.691361,-75.764205,1.585)); +#208821 = VECTOR('',#208822,1.); +#208822 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#208823 = ORIENTED_EDGE('',*,*,#208824,.T.); +#208824 = EDGE_CURVE('',#208817,#208825,#208827,.T.); +#208825 = VERTEX_POINT('',#208826); +#208826 = CARTESIAN_POINT('',(155.819844,-75.825465,1.585)); +#208827 = LINE('',#208828,#208829); +#208828 = CARTESIAN_POINT('',(155.717237,-75.770432,1.585)); +#208829 = VECTOR('',#208830,1.); +#208830 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#208831 = ORIENTED_EDGE('',*,*,#208832,.T.); +#208832 = EDGE_CURVE('',#208825,#208833,#208835,.T.); +#208833 = VERTEX_POINT('',#208834); +#208834 = CARTESIAN_POINT('',(155.874878,-75.885216,1.585)); +#208835 = LINE('',#208836,#208837); +#208836 = CARTESIAN_POINT('',(155.819844,-75.825465,1.585)); +#208837 = VECTOR('',#208838,1.); +#208838 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#208839 = ORIENTED_EDGE('',*,*,#208840,.T.); +#208840 = EDGE_CURVE('',#208833,#208841,#208843,.T.); +#208841 = VERTEX_POINT('',#208842); +#208842 = CARTESIAN_POINT('',(155.868491,-76.380153,1.585)); +#208843 = CIRCLE('',#208844,0.457783772261); +#208844 = AXIS2_PLACEMENT_3D('',#208845,#208846,#208847); +#208845 = CARTESIAN_POINT('',(155.48659953493,-76.12771510455,1.585)); +#208846 = DIRECTION('',(0.,0.,-1.)); +#208847 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#208848 = ORIENTED_EDGE('',*,*,#208849,.T.); +#208849 = EDGE_CURVE('',#208841,#208850,#208852,.T.); +#208850 = VERTEX_POINT('',#208851); +#208851 = CARTESIAN_POINT('',(155.819843,-76.431675,1.585)); +#208852 = LINE('',#208853,#208854); +#208853 = CARTESIAN_POINT('',(155.868491,-76.380153,1.585)); +#208854 = VECTOR('',#208855,1.); +#208855 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#208856 = ORIENTED_EDGE('',*,*,#208857,.T.); +#208857 = EDGE_CURVE('',#208850,#208858,#208860,.T.); +#208858 = VERTEX_POINT('',#208859); +#208859 = CARTESIAN_POINT('',(155.727921,-76.339751,1.585)); +#208860 = CIRCLE('',#208861,6.499937665135E-02); +#208861 = AXIS2_PLACEMENT_3D('',#208862,#208863,#208864); +#208862 = CARTESIAN_POINT('',(155.77388218097,-76.38571281902,1.585)); +#208863 = DIRECTION('',(-0.,0.,-1.)); +#208864 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#208865 = ORIENTED_EDGE('',*,*,#208866,.T.); +#208866 = EDGE_CURVE('',#208858,#208867,#208869,.T.); +#208867 = VERTEX_POINT('',#208868); +#208868 = CARTESIAN_POINT('',(155.763319,-76.304353,1.585)); +#208869 = LINE('',#208870,#208871); +#208870 = CARTESIAN_POINT('',(155.727921,-76.339751,1.585)); +#208871 = VECTOR('',#208872,1.); +#208872 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#208873 = ORIENTED_EDGE('',*,*,#208874,.T.); +#208874 = EDGE_CURVE('',#208867,#208875,#208877,.T.); +#208875 = VERTEX_POINT('',#208876); +#208876 = CARTESIAN_POINT('',(155.763319,-75.952788,1.585)); +#208877 = CIRCLE('',#208878,0.325008683278); +#208878 = AXIS2_PLACEMENT_3D('',#208879,#208880,#208881); +#208879 = CARTESIAN_POINT('',(155.489949,-76.1285705,1.585)); +#208880 = DIRECTION('',(0.,-0.,1.)); +#208881 = DIRECTION('',(0.841115988787,-0.540854780331,-0.)); +#208882 = ORIENTED_EDGE('',*,*,#208883,.T.); +#208883 = EDGE_CURVE('',#208875,#208884,#208886,.T.); +#208884 = VERTEX_POINT('',#208885); +#208885 = CARTESIAN_POINT('',(155.735379,-75.924848,1.585)); +#208886 = LINE('',#208887,#208888); +#208887 = CARTESIAN_POINT('',(155.763319,-75.952788,1.585)); +#208888 = VECTOR('',#208889,1.); +#208889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208890 = ORIENTED_EDGE('',*,*,#208891,.T.); +#208891 = EDGE_CURVE('',#208884,#208892,#208894,.T.); +#208892 = VERTEX_POINT('',#208893); +#208893 = CARTESIAN_POINT('',(155.426671,-75.924848,1.585)); +#208894 = CIRCLE('',#208895,0.277419178293); +#208895 = AXIS2_PLACEMENT_3D('',#208896,#208897,#208898); +#208896 = CARTESIAN_POINT('',(155.581025,-76.155361,1.585)); +#208897 = DIRECTION('',(0.,0.,1.)); +#208898 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#208899 = ORIENTED_EDGE('',*,*,#208900,.T.); +#208900 = EDGE_CURVE('',#208892,#208901,#208903,.T.); +#208901 = VERTEX_POINT('',#208902); +#208902 = CARTESIAN_POINT('',(155.398733,-75.952786,1.585)); +#208903 = LINE('',#208904,#208905); +#208904 = CARTESIAN_POINT('',(155.426671,-75.924848,1.585)); +#208905 = VECTOR('',#208906,1.); +#208906 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#208907 = ORIENTED_EDGE('',*,*,#208908,.T.); +#208908 = EDGE_CURVE('',#208901,#208909,#208911,.T.); +#208909 = VERTEX_POINT('',#208910); +#208910 = CARTESIAN_POINT('',(155.367454,-76.015344,1.585)); +#208911 = LINE('',#208912,#208913); +#208912 = CARTESIAN_POINT('',(155.398733,-75.952786,1.585)); +#208913 = VECTOR('',#208914,1.); +#208914 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#208915 = ORIENTED_EDGE('',*,*,#208916,.T.); +#208916 = EDGE_CURVE('',#208909,#208917,#208919,.T.); +#208917 = VERTEX_POINT('',#208918); +#208918 = CARTESIAN_POINT('',(155.367454,-76.12857,1.585)); +#208919 = LINE('',#208920,#208921); +#208920 = CARTESIAN_POINT('',(155.367454,-76.015344,1.585)); +#208921 = VECTOR('',#208922,1.); +#208922 = DIRECTION('',(0.,-1.,0.)); +#208923 = ORIENTED_EDGE('',*,*,#208924,.T.); +#208924 = EDGE_CURVE('',#208917,#208925,#208927,.T.); +#208925 = VERTEX_POINT('',#208926); +#208926 = CARTESIAN_POINT('',(155.259652,-76.177488,1.585)); +#208927 = CIRCLE('',#208928,6.500010429715E-02); +#208928 = AXIS2_PLACEMENT_3D('',#208929,#208930,#208931); +#208929 = CARTESIAN_POINT('',(155.3024538957,-76.12856958544,1.585)); +#208930 = DIRECTION('',(-0.,0.,-1.)); +#208931 = DIRECTION('',(0.99999999998,-6.377789442798E-06,-0.)); +#208932 = ORIENTED_EDGE('',*,*,#208933,.T.); +#208933 = EDGE_CURVE('',#208925,#208934,#208936,.T.); +#208934 = VERTEX_POINT('',#208935); +#208935 = CARTESIAN_POINT('',(155.024597,-75.971814,1.585)); +#208936 = LINE('',#208937,#208938); +#208937 = CARTESIAN_POINT('',(155.259652,-76.177488,1.585)); +#208938 = VECTOR('',#208939,1.); +#208939 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#208940 = ORIENTED_EDGE('',*,*,#208941,.T.); +#208941 = EDGE_CURVE('',#208934,#208942,#208944,.T.); +#208942 = VERTEX_POINT('',#208943); +#208943 = CARTESIAN_POINT('',(155.024597,-76.385713,1.585)); +#208944 = LINE('',#208945,#208946); +#208945 = CARTESIAN_POINT('',(155.024597,-75.971814,1.585)); +#208946 = VECTOR('',#208947,1.); +#208947 = DIRECTION('',(0.,-1.,0.)); +#208948 = ORIENTED_EDGE('',*,*,#208949,.T.); +#208949 = EDGE_CURVE('',#208942,#208950,#208952,.T.); +#208950 = VERTEX_POINT('',#208951); +#208951 = CARTESIAN_POINT('',(154.894597,-76.385713,1.585)); +#208952 = CIRCLE('',#208953,6.500000000091E-02); +#208953 = AXIS2_PLACEMENT_3D('',#208954,#208955,#208956); +#208954 = CARTESIAN_POINT('',(154.959597,-76.38571265513,1.585)); +#208955 = DIRECTION('',(-0.,0.,-1.)); +#208956 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#208957 = ORIENTED_EDGE('',*,*,#208958,.T.); +#208958 = EDGE_CURVE('',#208950,#208959,#208961,.T.); +#208959 = VERTEX_POINT('',#208960); +#208960 = CARTESIAN_POINT('',(154.894597,-75.82857,1.585)); +#208961 = LINE('',#208962,#208963); +#208962 = CARTESIAN_POINT('',(154.894597,-76.385713,1.585)); +#208963 = VECTOR('',#208964,1.); +#208964 = DIRECTION('',(0.,1.,0.)); +#208965 = ORIENTED_EDGE('',*,*,#208966,.T.); +#208966 = EDGE_CURVE('',#208959,#208967,#208969,.T.); +#208967 = VERTEX_POINT('',#208968); +#208968 = CARTESIAN_POINT('',(155.0024,-75.779653,1.585)); +#208969 = CIRCLE('',#208970,6.500002288384E-02); +#208970 = AXIS2_PLACEMENT_3D('',#208971,#208972,#208973); +#208971 = CARTESIAN_POINT('',(154.95959702288,-75.82857036015,1.585)); +#208972 = DIRECTION('',(0.,0.,-1.)); +#208973 = DIRECTION('',(-0.999999999985,5.54088725998E-06,0.)); +#208974 = ORIENTED_EDGE('',*,*,#208975,.T.); +#208975 = EDGE_CURVE('',#208967,#208798,#208976,.T.); +#208976 = LINE('',#208977,#208978); +#208977 = CARTESIAN_POINT('',(155.0024,-75.779653,1.585)); +#208978 = VECTOR('',#208979,1.); +#208979 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#208980 = PLANE('',#208981); +#208981 = AXIS2_PLACEMENT_3D('',#208982,#208983,#208984); +#208982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#208983 = DIRECTION('',(0.,0.,1.)); +#208984 = DIRECTION('',(1.,0.,-0.)); +#208985 = SHELL_BASED_SURFACE_MODEL('',(#208986)); +#208986 = OPEN_SHELL('',(#208987)); +#208987 = ADVANCED_FACE('',(#208988),#209090,.T.); +#208988 = FACE_BOUND('',#208989,.F.); +#208989 = EDGE_LOOP('',(#208990,#209000,#209009,#209017,#209025,#209034, + #209042,#209050,#209059,#209067,#209075,#209084)); +#208990 = ORIENTED_EDGE('',*,*,#208991,.T.); +#208991 = EDGE_CURVE('',#208992,#208994,#208996,.T.); +#208992 = VERTEX_POINT('',#208993); +#208993 = CARTESIAN_POINT('',(122.359596,-75.993307,1.585)); +#208994 = VERTEX_POINT('',#208995); +#208995 = CARTESIAN_POINT('',(122.773541,-75.717345,1.585)); +#208996 = LINE('',#208997,#208998); +#208997 = CARTESIAN_POINT('',(122.359596,-75.993307,1.585)); +#208998 = VECTOR('',#208999,1.); +#208999 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#209000 = ORIENTED_EDGE('',*,*,#209001,.T.); +#209001 = EDGE_CURVE('',#208994,#209002,#209004,.T.); +#209002 = VERTEX_POINT('',#209003); +#209003 = CARTESIAN_POINT('',(122.845652,-75.825511,1.585)); +#209004 = CIRCLE('',#209005,6.499976899536E-02); +#209005 = AXIS2_PLACEMENT_3D('',#209006,#209007,#209008); +#209006 = CARTESIAN_POINT('',(122.80959612917,-75.77142824722,1.585)); +#209007 = DIRECTION('',(0.,0.,-1.)); +#209008 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#209009 = ORIENTED_EDGE('',*,*,#209010,.T.); +#209010 = EDGE_CURVE('',#209002,#209011,#209013,.T.); +#209011 = VERTEX_POINT('',#209012); +#209012 = CARTESIAN_POINT('',(122.476776,-76.071428,1.585)); +#209013 = LINE('',#209014,#209015); +#209014 = CARTESIAN_POINT('',(122.845652,-75.825511,1.585)); +#209015 = VECTOR('',#209016,1.); +#209016 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#209017 = ORIENTED_EDGE('',*,*,#209018,.T.); +#209018 = EDGE_CURVE('',#209011,#209019,#209021,.T.); +#209019 = VERTEX_POINT('',#209020); +#209020 = CARTESIAN_POINT('',(122.845652,-76.317345,1.585)); +#209021 = LINE('',#209022,#209023); +#209022 = CARTESIAN_POINT('',(122.476776,-76.071428,1.585)); +#209023 = VECTOR('',#209024,1.); +#209024 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#209025 = ORIENTED_EDGE('',*,*,#209026,.T.); +#209026 = EDGE_CURVE('',#209019,#209027,#209029,.T.); +#209027 = VERTEX_POINT('',#209028); +#209028 = CARTESIAN_POINT('',(122.773541,-76.425511,1.585)); +#209029 = CIRCLE('',#209030,6.49997689954E-02); +#209030 = AXIS2_PLACEMENT_3D('',#209031,#209032,#209033); +#209031 = CARTESIAN_POINT('',(122.80959687747,-76.37142825164,1.585)); +#209032 = DIRECTION('',(0.,0.,-1.)); +#209033 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#209034 = ORIENTED_EDGE('',*,*,#209035,.T.); +#209035 = EDGE_CURVE('',#209027,#209036,#209038,.T.); +#209036 = VERTEX_POINT('',#209037); +#209037 = CARTESIAN_POINT('',(122.359596,-76.149548,1.585)); +#209038 = LINE('',#209039,#209040); +#209039 = CARTESIAN_POINT('',(122.773541,-76.425511,1.585)); +#209040 = VECTOR('',#209041,1.); +#209041 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#209042 = ORIENTED_EDGE('',*,*,#209043,.T.); +#209043 = EDGE_CURVE('',#209036,#209044,#209046,.T.); +#209044 = VERTEX_POINT('',#209045); +#209045 = CARTESIAN_POINT('',(121.945653,-76.425511,1.585)); +#209046 = LINE('',#209047,#209048); +#209047 = CARTESIAN_POINT('',(122.359596,-76.149548,1.585)); +#209048 = VECTOR('',#209049,1.); +#209049 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#209050 = ORIENTED_EDGE('',*,*,#209051,.T.); +#209051 = EDGE_CURVE('',#209044,#209052,#209054,.T.); +#209052 = VERTEX_POINT('',#209053); +#209053 = CARTESIAN_POINT('',(121.873541,-76.317345,1.585)); +#209054 = CIRCLE('',#209055,6.500004634766E-02); +#209055 = AXIS2_PLACEMENT_3D('',#209056,#209057,#209058); +#209056 = CARTESIAN_POINT('',(121.90959737004,-76.3714277533,1.585)); +#209057 = DIRECTION('',(0.,0.,-1.)); +#209058 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#209059 = ORIENTED_EDGE('',*,*,#209060,.T.); +#209060 = EDGE_CURVE('',#209052,#209061,#209063,.T.); +#209061 = VERTEX_POINT('',#209062); +#209062 = CARTESIAN_POINT('',(122.242416,-76.071428,1.585)); +#209063 = LINE('',#209064,#209065); +#209064 = CARTESIAN_POINT('',(121.873541,-76.317345,1.585)); +#209065 = VECTOR('',#209066,1.); +#209066 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#209067 = ORIENTED_EDGE('',*,*,#209068,.T.); +#209068 = EDGE_CURVE('',#209061,#209069,#209071,.T.); +#209069 = VERTEX_POINT('',#209070); +#209070 = CARTESIAN_POINT('',(121.873541,-75.825511,1.585)); +#209071 = LINE('',#209072,#209073); +#209072 = CARTESIAN_POINT('',(122.242416,-76.071428,1.585)); +#209073 = VECTOR('',#209074,1.); +#209074 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#209075 = ORIENTED_EDGE('',*,*,#209076,.T.); +#209076 = EDGE_CURVE('',#209069,#209077,#209079,.T.); +#209077 = VERTEX_POINT('',#209078); +#209078 = CARTESIAN_POINT('',(121.945653,-75.717345,1.585)); +#209079 = CIRCLE('',#209080,6.500004634723E-02); +#209080 = AXIS2_PLACEMENT_3D('',#209081,#209082,#209083); +#209081 = CARTESIAN_POINT('',(121.90959731405,-75.77142820937,1.585)); +#209082 = DIRECTION('',(0.,0.,-1.)); +#209083 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#209084 = ORIENTED_EDGE('',*,*,#209085,.T.); +#209085 = EDGE_CURVE('',#209077,#208992,#209086,.T.); +#209086 = LINE('',#209087,#209088); +#209087 = CARTESIAN_POINT('',(121.945653,-75.717345,1.585)); +#209088 = VECTOR('',#209089,1.); +#209089 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#209090 = PLANE('',#209091); +#209091 = AXIS2_PLACEMENT_3D('',#209092,#209093,#209094); +#209092 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209093 = DIRECTION('',(0.,0.,1.)); +#209094 = DIRECTION('',(1.,0.,-0.)); +#209095 = SHELL_BASED_SURFACE_MODEL('',(#209096)); +#209096 = OPEN_SHELL('',(#209097)); +#209097 = ADVANCED_FACE('',(#209098),#209225,.T.); +#209098 = FACE_BOUND('',#209099,.F.); +#209099 = EDGE_LOOP('',(#209100,#209111,#209119,#209128,#209136,#209144, + #209153,#209161,#209170,#209178,#209186,#209194,#209203,#209211, + #209219)); +#209100 = ORIENTED_EDGE('',*,*,#209101,.T.); +#209101 = EDGE_CURVE('',#209102,#209104,#209106,.T.); +#209102 = VERTEX_POINT('',#209103); +#209103 = CARTESIAN_POINT('',(107.539545,-75.803697,1.585)); +#209104 = VERTEX_POINT('',#209105); +#209105 = CARTESIAN_POINT('',(107.664597,-75.828571,1.585)); +#209106 = CIRCLE('',#209107,6.499988811647E-02); +#209107 = AXIS2_PLACEMENT_3D('',#209108,#209109,#209110); +#209108 = CARTESIAN_POINT('',(107.59959711188,-75.8285712701,1.585)); +#209109 = DIRECTION('',(0.,0.,-1.)); +#209110 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#209111 = ORIENTED_EDGE('',*,*,#209112,.T.); +#209112 = EDGE_CURVE('',#209104,#209113,#209115,.T.); +#209113 = VERTEX_POINT('',#209114); +#209114 = CARTESIAN_POINT('',(107.664597,-76.342857,1.585)); +#209115 = LINE('',#209116,#209117); +#209116 = CARTESIAN_POINT('',(107.664597,-75.828571,1.585)); +#209117 = VECTOR('',#209118,1.); +#209118 = DIRECTION('',(0.,-1.,0.)); +#209119 = ORIENTED_EDGE('',*,*,#209120,.T.); +#209120 = EDGE_CURVE('',#209113,#209121,#209123,.T.); +#209121 = VERTEX_POINT('',#209122); +#209122 = CARTESIAN_POINT('',(107.534597,-76.342857,1.585)); +#209123 = CIRCLE('',#209124,6.500000000091E-02); +#209124 = AXIS2_PLACEMENT_3D('',#209125,#209126,#209127); +#209125 = CARTESIAN_POINT('',(107.599597,-76.34285665513,1.585)); +#209126 = DIRECTION('',(-0.,0.,-1.)); +#209127 = DIRECTION('',(0.999999999986,-5.305658025668E-06,-0.)); +#209128 = ORIENTED_EDGE('',*,*,#209129,.T.); +#209129 = EDGE_CURVE('',#209121,#209130,#209132,.T.); +#209130 = VERTEX_POINT('',#209131); +#209131 = CARTESIAN_POINT('',(107.534597,-76.150714,1.585)); +#209132 = LINE('',#209133,#209134); +#209133 = CARTESIAN_POINT('',(107.534597,-76.342857,1.585)); +#209134 = VECTOR('',#209135,1.); +#209135 = DIRECTION('',(0.,1.,0.)); +#209136 = ORIENTED_EDGE('',*,*,#209137,.T.); +#209137 = EDGE_CURVE('',#209130,#209138,#209140,.T.); +#209138 = VERTEX_POINT('',#209139); +#209139 = CARTESIAN_POINT('',(106.899377,-76.150714,1.585)); +#209140 = LINE('',#209141,#209142); +#209141 = CARTESIAN_POINT('',(107.534597,-76.150714,1.585)); +#209142 = VECTOR('',#209143,1.); +#209143 = DIRECTION('',(-1.,0.,0.)); +#209144 = ORIENTED_EDGE('',*,*,#209145,.T.); +#209145 = EDGE_CURVE('',#209138,#209146,#209148,.T.); +#209146 = VERTEX_POINT('',#209147); +#209147 = CARTESIAN_POINT('',(107.021576,-76.338249,1.585)); +#209148 = CIRCLE('',#209149,0.344106608647); +#209149 = AXIS2_PLACEMENT_3D('',#209150,#209151,#209152); +#209150 = CARTESIAN_POINT('',(106.68784890229,-76.42212737843,1.585)); +#209151 = DIRECTION('',(0.,0.,-1.)); +#209152 = DIRECTION('',(0.614716754616,0.788747939201,0.)); +#209153 = ORIENTED_EDGE('',*,*,#209154,.T.); +#209154 = EDGE_CURVE('',#209146,#209155,#209157,.T.); +#209155 = VERTEX_POINT('',#209156); +#209156 = CARTESIAN_POINT('',(107.005845,-76.385445,1.585)); +#209157 = LINE('',#209158,#209159); +#209158 = CARTESIAN_POINT('',(107.021576,-76.338249,1.585)); +#209159 = VECTOR('',#209160,1.); +#209160 = DIRECTION('',(-0.316209675011,-0.948689328194,0.)); +#209161 = ORIENTED_EDGE('',*,*,#209162,.T.); +#209162 = EDGE_CURVE('',#209155,#209163,#209165,.T.); +#209163 = VERTEX_POINT('',#209164); +#209164 = CARTESIAN_POINT('',(106.898603,-76.371927,1.585)); +#209165 = CIRCLE('',#209166,6.500070728727E-02); +#209166 = AXIS2_PLACEMENT_3D('',#209167,#209168,#209169); +#209167 = CARTESIAN_POINT('',(106.9567404363,-76.3428558726,1.585)); +#209168 = DIRECTION('',(-0.,0.,-1.)); +#209169 = DIRECTION('',(0.755446605822,-0.655210214932,-0.)); +#209170 = ORIENTED_EDGE('',*,*,#209171,.T.); +#209171 = EDGE_CURVE('',#209163,#209172,#209174,.T.); +#209172 = VERTEX_POINT('',#209173); +#209173 = CARTESIAN_POINT('',(106.860463,-76.295647,1.585)); +#209174 = LINE('',#209175,#209176); +#209175 = CARTESIAN_POINT('',(106.898603,-76.371927,1.585)); +#209176 = VECTOR('',#209177,1.); +#209177 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#209178 = ORIENTED_EDGE('',*,*,#209179,.T.); +#209179 = EDGE_CURVE('',#209172,#209180,#209182,.T.); +#209180 = VERTEX_POINT('',#209181); +#209181 = CARTESIAN_POINT('',(106.786756,-76.22194,1.585)); +#209182 = LINE('',#209183,#209184); +#209183 = CARTESIAN_POINT('',(106.860463,-76.295647,1.585)); +#209184 = VECTOR('',#209185,1.); +#209185 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209186 = ORIENTED_EDGE('',*,*,#209187,.T.); +#209187 = EDGE_CURVE('',#209180,#209188,#209190,.T.); +#209188 = VERTEX_POINT('',#209189); +#209189 = CARTESIAN_POINT('',(106.663541,-76.139797,1.585)); +#209190 = LINE('',#209191,#209192); +#209191 = CARTESIAN_POINT('',(106.786756,-76.22194,1.585)); +#209192 = VECTOR('',#209193,1.); +#209193 = DIRECTION('',(-0.832051333235,0.554698637876,0.)); +#209194 = ORIENTED_EDGE('',*,*,#209195,.T.); +#209195 = EDGE_CURVE('',#209188,#209196,#209198,.T.); +#209196 = VERTEX_POINT('',#209197); +#209197 = CARTESIAN_POINT('',(106.699597,-76.020714,1.585)); +#209198 = CIRCLE('',#209199,6.500015790363E-02); +#209199 = AXIS2_PLACEMENT_3D('',#209200,#209201,#209202); +#209200 = CARTESIAN_POINT('',(106.69959743795,-76.0857141579,1.585)); +#209201 = DIRECTION('',(0.,0.,-1.)); +#209202 = DIRECTION('',(-0.554713082544,-0.832041703314,-0.)); +#209203 = ORIENTED_EDGE('',*,*,#209204,.T.); +#209204 = EDGE_CURVE('',#209196,#209205,#209207,.T.); +#209205 = VERTEX_POINT('',#209206); +#209206 = CARTESIAN_POINT('',(107.534597,-76.020714,1.585)); +#209207 = LINE('',#209208,#209209); +#209208 = CARTESIAN_POINT('',(106.699597,-76.020714,1.585)); +#209209 = VECTOR('',#209210,1.); +#209210 = DIRECTION('',(1.,0.,0.)); +#209211 = ORIENTED_EDGE('',*,*,#209212,.T.); +#209212 = EDGE_CURVE('',#209205,#209213,#209215,.T.); +#209213 = VERTEX_POINT('',#209214); +#209214 = CARTESIAN_POINT('',(107.534597,-75.828571,1.585)); +#209215 = LINE('',#209216,#209217); +#209216 = CARTESIAN_POINT('',(107.534597,-76.020714,1.585)); +#209217 = VECTOR('',#209218,1.); +#209218 = DIRECTION('',(0.,1.,0.)); +#209219 = ORIENTED_EDGE('',*,*,#209220,.T.); +#209220 = EDGE_CURVE('',#209213,#209102,#209221,.T.); +#209221 = LINE('',#209222,#209223); +#209222 = CARTESIAN_POINT('',(107.534597,-75.828571,1.585)); +#209223 = VECTOR('',#209224,1.); +#209224 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#209225 = PLANE('',#209226); +#209226 = AXIS2_PLACEMENT_3D('',#209227,#209228,#209229); +#209227 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209228 = DIRECTION('',(0.,0.,1.)); +#209229 = DIRECTION('',(1.,0.,-0.)); +#209230 = SHELL_BASED_SURFACE_MODEL('',(#209231)); +#209231 = OPEN_SHELL('',(#209232)); +#209232 = ADVANCED_FACE('',(#209233),#209368,.T.); +#209233 = FACE_BOUND('',#209234,.F.); +#209234 = EDGE_LOOP('',(#209235,#209246,#209254,#209262,#209271,#209279, + #209287,#209296,#209304,#209313,#209321,#209329,#209337,#209346, + #209354,#209362)); +#209235 = ORIENTED_EDGE('',*,*,#209236,.T.); +#209236 = EDGE_CURVE('',#209237,#209239,#209241,.T.); +#209237 = VERTEX_POINT('',#209238); +#209238 = CARTESIAN_POINT('',(114.859545,-75.76084,1.585)); +#209239 = VERTEX_POINT('',#209240); +#209240 = CARTESIAN_POINT('',(114.984597,-75.785714,1.585)); +#209241 = CIRCLE('',#209242,6.499988811647E-02); +#209242 = AXIS2_PLACEMENT_3D('',#209243,#209244,#209245); +#209243 = CARTESIAN_POINT('',(114.91959711188,-75.7857142701,1.585)); +#209244 = DIRECTION('',(0.,0.,-1.)); +#209245 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#209246 = ORIENTED_EDGE('',*,*,#209247,.T.); +#209247 = EDGE_CURVE('',#209239,#209248,#209250,.T.); +#209248 = VERTEX_POINT('',#209249); +#209249 = CARTESIAN_POINT('',(114.984597,-75.849286,1.585)); +#209250 = LINE('',#209251,#209252); +#209251 = CARTESIAN_POINT('',(114.984597,-75.785714,1.585)); +#209252 = VECTOR('',#209253,1.); +#209253 = DIRECTION('',(0.,-1.,0.)); +#209254 = ORIENTED_EDGE('',*,*,#209255,.T.); +#209255 = EDGE_CURVE('',#209248,#209256,#209258,.T.); +#209256 = VERTEX_POINT('',#209257); +#209257 = CARTESIAN_POINT('',(115.219597,-75.849286,1.585)); +#209258 = LINE('',#209259,#209260); +#209259 = CARTESIAN_POINT('',(114.984597,-75.849286,1.585)); +#209260 = VECTOR('',#209261,1.); +#209261 = DIRECTION('',(1.,0.,0.)); +#209262 = ORIENTED_EDGE('',*,*,#209263,.T.); +#209263 = EDGE_CURVE('',#209256,#209264,#209266,.T.); +#209264 = VERTEX_POINT('',#209265); +#209265 = CARTESIAN_POINT('',(115.219597,-75.979286,1.585)); +#209266 = CIRCLE('',#209267,6.500000000091E-02); +#209267 = AXIS2_PLACEMENT_3D('',#209268,#209269,#209270); +#209268 = CARTESIAN_POINT('',(115.21959665513,-75.914286,1.585)); +#209269 = DIRECTION('',(0.,0.,-1.)); +#209270 = DIRECTION('',(5.30565780704E-06,0.999999999986,0.)); +#209271 = ORIENTED_EDGE('',*,*,#209272,.T.); +#209272 = EDGE_CURVE('',#209264,#209273,#209275,.T.); +#209273 = VERTEX_POINT('',#209274); +#209274 = CARTESIAN_POINT('',(114.984597,-75.979286,1.585)); +#209275 = LINE('',#209276,#209277); +#209276 = CARTESIAN_POINT('',(115.219597,-75.979286,1.585)); +#209277 = VECTOR('',#209278,1.); +#209278 = DIRECTION('',(-1.,0.,0.)); +#209279 = ORIENTED_EDGE('',*,*,#209280,.T.); +#209280 = EDGE_CURVE('',#209273,#209281,#209283,.T.); +#209281 = VERTEX_POINT('',#209282); +#209282 = CARTESIAN_POINT('',(114.984597,-76.342857,1.585)); +#209283 = LINE('',#209284,#209285); +#209284 = CARTESIAN_POINT('',(114.984597,-75.979286,1.585)); +#209285 = VECTOR('',#209286,1.); +#209286 = DIRECTION('',(0.,-1.,0.)); +#209287 = ORIENTED_EDGE('',*,*,#209288,.T.); +#209288 = EDGE_CURVE('',#209281,#209289,#209291,.T.); +#209289 = VERTEX_POINT('',#209290); +#209290 = CARTESIAN_POINT('',(114.899042,-76.404521,1.585)); +#209291 = CIRCLE('',#209292,6.499920680886E-02); +#209292 = AXIS2_PLACEMENT_3D('',#209293,#209294,#209295); +#209293 = CARTESIAN_POINT('',(114.91959779319,-76.3428577512,1.585)); +#209294 = DIRECTION('',(0.,0.,-1.)); +#209295 = DIRECTION('',(0.999999999933,1.15571496736E-05,0.)); +#209296 = ORIENTED_EDGE('',*,*,#209297,.T.); +#209297 = EDGE_CURVE('',#209289,#209298,#209300,.T.); +#209298 = VERTEX_POINT('',#209299); +#209299 = CARTESIAN_POINT('',(114.256185,-76.190235,1.585)); +#209300 = LINE('',#209301,#209302); +#209301 = CARTESIAN_POINT('',(114.899042,-76.404521,1.585)); +#209302 = VECTOR('',#209303,1.); +#209303 = DIRECTION('',(-0.948683150477,0.316228208736,0.)); +#209304 = ORIENTED_EDGE('',*,*,#209305,.T.); +#209305 = EDGE_CURVE('',#209298,#209306,#209308,.T.); +#209306 = VERTEX_POINT('',#209307); +#209307 = CARTESIAN_POINT('',(114.297295,-76.066907,1.585)); +#209308 = CIRCLE('',#209309,6.499966862258E-02); +#209309 = AXIS2_PLACEMENT_3D('',#209310,#209311,#209312); +#209310 = CARTESIAN_POINT('',(114.27674020202,-76.12857106734,1.585)); +#209311 = DIRECTION('',(0.,0.,-1.)); +#209312 = DIRECTION('',(-0.316235489453,-0.948680723537,-0.)); +#209313 = ORIENTED_EDGE('',*,*,#209314,.T.); +#209314 = EDGE_CURVE('',#209306,#209315,#209317,.T.); +#209315 = VERTEX_POINT('',#209316); +#209316 = CARTESIAN_POINT('',(114.854597,-76.252674,1.585)); +#209317 = LINE('',#209318,#209319); +#209318 = CARTESIAN_POINT('',(114.297295,-76.066907,1.585)); +#209319 = VECTOR('',#209320,1.); +#209320 = DIRECTION('',(0.948683468278,-0.316227255333,0.)); +#209321 = ORIENTED_EDGE('',*,*,#209322,.T.); +#209322 = EDGE_CURVE('',#209315,#209323,#209325,.T.); +#209323 = VERTEX_POINT('',#209324); +#209324 = CARTESIAN_POINT('',(114.854597,-75.979286,1.585)); +#209325 = LINE('',#209326,#209327); +#209326 = CARTESIAN_POINT('',(114.854597,-76.252674,1.585)); +#209327 = VECTOR('',#209328,1.); +#209328 = DIRECTION('',(0.,1.,0.)); +#209329 = ORIENTED_EDGE('',*,*,#209330,.T.); +#209330 = EDGE_CURVE('',#209323,#209331,#209333,.T.); +#209331 = VERTEX_POINT('',#209332); +#209332 = CARTESIAN_POINT('',(114.619597,-75.979286,1.585)); +#209333 = LINE('',#209334,#209335); +#209334 = CARTESIAN_POINT('',(114.854597,-75.979286,1.585)); +#209335 = VECTOR('',#209336,1.); +#209336 = DIRECTION('',(-1.,0.,0.)); +#209337 = ORIENTED_EDGE('',*,*,#209338,.T.); +#209338 = EDGE_CURVE('',#209331,#209339,#209341,.T.); +#209339 = VERTEX_POINT('',#209340); +#209340 = CARTESIAN_POINT('',(114.619597,-75.849286,1.585)); +#209341 = CIRCLE('',#209342,6.500000000091E-02); +#209342 = AXIS2_PLACEMENT_3D('',#209343,#209344,#209345); +#209343 = CARTESIAN_POINT('',(114.61959734486,-75.914286,1.585)); +#209344 = DIRECTION('',(0.,0.,-1.)); +#209345 = DIRECTION('',(-5.305658244297E-06,-0.999999999986,-0.)); +#209346 = ORIENTED_EDGE('',*,*,#209347,.T.); +#209347 = EDGE_CURVE('',#209339,#209348,#209350,.T.); +#209348 = VERTEX_POINT('',#209349); +#209349 = CARTESIAN_POINT('',(114.854597,-75.849286,1.585)); +#209350 = LINE('',#209351,#209352); +#209351 = CARTESIAN_POINT('',(114.619597,-75.849286,1.585)); +#209352 = VECTOR('',#209353,1.); +#209353 = DIRECTION('',(1.,0.,0.)); +#209354 = ORIENTED_EDGE('',*,*,#209355,.T.); +#209355 = EDGE_CURVE('',#209348,#209356,#209358,.T.); +#209356 = VERTEX_POINT('',#209357); +#209357 = CARTESIAN_POINT('',(114.854597,-75.785714,1.585)); +#209358 = LINE('',#209359,#209360); +#209359 = CARTESIAN_POINT('',(114.854597,-75.849286,1.585)); +#209360 = VECTOR('',#209361,1.); +#209361 = DIRECTION('',(0.,1.,0.)); +#209362 = ORIENTED_EDGE('',*,*,#209363,.T.); +#209363 = EDGE_CURVE('',#209356,#209237,#209364,.T.); +#209364 = LINE('',#209365,#209366); +#209365 = CARTESIAN_POINT('',(114.854597,-75.785714,1.585)); +#209366 = VECTOR('',#209367,1.); +#209367 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#209368 = PLANE('',#209369); +#209369 = AXIS2_PLACEMENT_3D('',#209370,#209371,#209372); +#209370 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209371 = DIRECTION('',(0.,0.,1.)); +#209372 = DIRECTION('',(1.,0.,-0.)); +#209373 = SHELL_BASED_SURFACE_MODEL('',(#209374)); +#209374 = OPEN_SHELL('',(#209375)); +#209375 = ADVANCED_FACE('',(#209376),#209462,.T.); +#209376 = FACE_BOUND('',#209377,.F.); +#209377 = EDGE_LOOP('',(#209378,#209389,#209397,#209406,#209414,#209422, + #209431,#209439,#209448,#209456)); +#209378 = ORIENTED_EDGE('',*,*,#209379,.T.); +#209379 = EDGE_CURVE('',#209380,#209382,#209384,.T.); +#209380 = VERTEX_POINT('',#209381); +#209381 = CARTESIAN_POINT('',(116.959597,-75.879285,1.585)); +#209382 = VERTEX_POINT('',#209383); +#209383 = CARTESIAN_POINT('',(116.959597,-75.749285,1.585)); +#209384 = CIRCLE('',#209385,6.500000000092E-02); +#209385 = AXIS2_PLACEMENT_3D('',#209386,#209387,#209388); +#209386 = CARTESIAN_POINT('',(116.95959734486,-75.814285,1.585)); +#209387 = DIRECTION('',(0.,0.,-1.)); +#209388 = DIRECTION('',(-5.305658244296E-06,-0.999999999986,-0.)); +#209389 = ORIENTED_EDGE('',*,*,#209390,.T.); +#209390 = EDGE_CURVE('',#209382,#209391,#209393,.T.); +#209391 = VERTEX_POINT('',#209392); +#209392 = CARTESIAN_POINT('',(117.859597,-75.749285,1.585)); +#209393 = LINE('',#209394,#209395); +#209394 = CARTESIAN_POINT('',(116.959597,-75.749285,1.585)); +#209395 = VECTOR('',#209396,1.); +#209396 = DIRECTION('',(1.,0.,0.)); +#209397 = ORIENTED_EDGE('',*,*,#209398,.T.); +#209398 = EDGE_CURVE('',#209391,#209399,#209401,.T.); +#209399 = VERTEX_POINT('',#209400); +#209400 = CARTESIAN_POINT('',(117.891846,-75.870721,1.585)); +#209401 = CIRCLE('',#209402,6.500021194141E-02); +#209402 = AXIS2_PLACEMENT_3D('',#209403,#209404,#209405); +#209403 = CARTESIAN_POINT('',(117.85959651351,-75.81428521194,1.585)); +#209404 = DIRECTION('',(0.,0.,-1.)); +#209405 = DIRECTION('',(7.484331896835E-06,0.999999999972,0.)); +#209406 = ORIENTED_EDGE('',*,*,#209407,.T.); +#209407 = EDGE_CURVE('',#209399,#209408,#209410,.T.); +#209408 = VERTEX_POINT('',#209409); +#209409 = CARTESIAN_POINT('',(117.204359,-76.263571,1.585)); +#209410 = LINE('',#209411,#209412); +#209411 = CARTESIAN_POINT('',(117.891846,-75.870721,1.585)); +#209412 = VECTOR('',#209413,1.); +#209413 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#209414 = ORIENTED_EDGE('',*,*,#209415,.T.); +#209415 = EDGE_CURVE('',#209408,#209416,#209418,.T.); +#209416 = VERTEX_POINT('',#209417); +#209417 = CARTESIAN_POINT('',(117.859597,-76.263571,1.585)); +#209418 = LINE('',#209419,#209420); +#209419 = CARTESIAN_POINT('',(117.204359,-76.263571,1.585)); +#209420 = VECTOR('',#209421,1.); +#209421 = DIRECTION('',(1.,0.,0.)); +#209422 = ORIENTED_EDGE('',*,*,#209423,.T.); +#209423 = EDGE_CURVE('',#209416,#209424,#209426,.T.); +#209424 = VERTEX_POINT('',#209425); +#209425 = CARTESIAN_POINT('',(117.859597,-76.393571,1.585)); +#209426 = CIRCLE('',#209427,6.500000000092E-02); +#209427 = AXIS2_PLACEMENT_3D('',#209428,#209429,#209430); +#209428 = CARTESIAN_POINT('',(117.85959665513,-76.328571,1.585)); +#209429 = DIRECTION('',(0.,0.,-1.)); +#209430 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#209431 = ORIENTED_EDGE('',*,*,#209432,.T.); +#209432 = EDGE_CURVE('',#209424,#209433,#209435,.T.); +#209433 = VERTEX_POINT('',#209434); +#209434 = CARTESIAN_POINT('',(116.959597,-76.393571,1.585)); +#209435 = LINE('',#209436,#209437); +#209436 = CARTESIAN_POINT('',(117.859597,-76.393571,1.585)); +#209437 = VECTOR('',#209438,1.); +#209438 = DIRECTION('',(-1.,0.,0.)); +#209439 = ORIENTED_EDGE('',*,*,#209440,.T.); +#209440 = EDGE_CURVE('',#209433,#209441,#209443,.T.); +#209441 = VERTEX_POINT('',#209442); +#209442 = CARTESIAN_POINT('',(116.927348,-76.272135,1.585)); +#209443 = CIRCLE('',#209444,6.50002119414E-02); +#209444 = AXIS2_PLACEMENT_3D('',#209445,#209446,#209447); +#209445 = CARTESIAN_POINT('',(116.95959748648,-76.32857078806,1.585)); +#209446 = DIRECTION('',(0.,0.,-1.)); +#209447 = DIRECTION('',(-7.484332115465E-06,-0.999999999972,-0.)); +#209448 = ORIENTED_EDGE('',*,*,#209449,.T.); +#209449 = EDGE_CURVE('',#209441,#209450,#209452,.T.); +#209450 = VERTEX_POINT('',#209451); +#209451 = CARTESIAN_POINT('',(117.614835,-75.879285,1.585)); +#209452 = LINE('',#209453,#209454); +#209453 = CARTESIAN_POINT('',(116.927348,-76.272135,1.585)); +#209454 = VECTOR('',#209455,1.); +#209455 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#209456 = ORIENTED_EDGE('',*,*,#209457,.T.); +#209457 = EDGE_CURVE('',#209450,#209380,#209458,.T.); +#209458 = LINE('',#209459,#209460); +#209459 = CARTESIAN_POINT('',(117.614835,-75.879285,1.585)); +#209460 = VECTOR('',#209461,1.); +#209461 = DIRECTION('',(-1.,0.,0.)); +#209462 = PLANE('',#209463); +#209463 = AXIS2_PLACEMENT_3D('',#209464,#209465,#209466); +#209464 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209465 = DIRECTION('',(0.,0.,1.)); +#209466 = DIRECTION('',(1.,0.,-0.)); +#209467 = SHELL_BASED_SURFACE_MODEL('',(#209468)); +#209468 = OPEN_SHELL('',(#209469)); +#209469 = ADVANCED_FACE('',(#209470),#209555,.T.); +#209470 = FACE_BOUND('',#209471,.F.); +#209471 = EDGE_LOOP('',(#209472,#209483,#209491,#209499,#209508,#209516, + #209524,#209533,#209541,#209549)); +#209472 = ORIENTED_EDGE('',*,*,#209473,.T.); +#209473 = EDGE_CURVE('',#209474,#209476,#209478,.T.); +#209474 = VERTEX_POINT('',#209475); +#209475 = CARTESIAN_POINT('',(185.009287,-75.276875,1.585)); +#209476 = VERTEX_POINT('',#209477); +#209477 = CARTESIAN_POINT('',(185.178286,-75.346877,1.585)); +#209478 = CIRCLE('',#209479,0.109999394362); +#209479 = AXIS2_PLACEMENT_3D('',#209480,#209481,#209482); +#209480 = CARTESIAN_POINT('',(185.0704,-75.36833574562,1.585)); +#209481 = DIRECTION('',(0.,0.,-1.)); +#209482 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#209483 = ORIENTED_EDGE('',*,*,#209484,.T.); +#209484 = EDGE_CURVE('',#209476,#209485,#209487,.T.); +#209485 = VERTEX_POINT('',#209486); +#209486 = CARTESIAN_POINT('',(185.1804,-75.71548,1.585)); +#209487 = LINE('',#209488,#209489); +#209488 = CARTESIAN_POINT('',(185.178286,-75.346877,1.585)); +#209489 = VECTOR('',#209490,1.); +#209490 = DIRECTION('',(5.735073327767E-03,-0.999983554332,0.)); +#209491 = ORIENTED_EDGE('',*,*,#209492,.T.); +#209492 = EDGE_CURVE('',#209485,#209493,#209495,.T.); +#209493 = VERTEX_POINT('',#209494); +#209494 = CARTESIAN_POINT('',(186.69186,-75.717594,1.585)); +#209495 = LINE('',#209496,#209497); +#209496 = CARTESIAN_POINT('',(185.1804,-75.71548,1.585)); +#209497 = VECTOR('',#209498,1.); +#209498 = DIRECTION('',(0.999999021894,-1.398646297149E-03,0.)); +#209499 = ORIENTED_EDGE('',*,*,#209500,.T.); +#209500 = EDGE_CURVE('',#209493,#209501,#209503,.T.); +#209501 = VERTEX_POINT('',#209502); +#209502 = CARTESIAN_POINT('',(186.69186,-75.933366,1.585)); +#209503 = CIRCLE('',#209504,0.109999639072); +#209504 = AXIS2_PLACEMENT_3D('',#209505,#209506,#209507); +#209505 = CARTESIAN_POINT('',(186.6704,-75.82548,1.585)); +#209506 = DIRECTION('',(0.,0.,-1.)); +#209507 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#209508 = ORIENTED_EDGE('',*,*,#209509,.T.); +#209509 = EDGE_CURVE('',#209501,#209510,#209512,.T.); +#209510 = VERTEX_POINT('',#209511); +#209511 = CARTESIAN_POINT('',(185.1804,-75.93548,1.585)); +#209512 = LINE('',#209513,#209514); +#209513 = CARTESIAN_POINT('',(186.69186,-75.933366,1.585)); +#209514 = VECTOR('',#209515,1.); +#209515 = DIRECTION('',(-0.999999021894,-1.39864629714E-03,0.)); +#209516 = ORIENTED_EDGE('',*,*,#209517,.T.); +#209517 = EDGE_CURVE('',#209510,#209518,#209520,.T.); +#209518 = VERTEX_POINT('',#209519); +#209519 = CARTESIAN_POINT('',(185.178286,-76.304083,1.585)); +#209520 = LINE('',#209521,#209522); +#209521 = CARTESIAN_POINT('',(185.1804,-75.93548,1.585)); +#209522 = VECTOR('',#209523,1.); +#209523 = DIRECTION('',(-5.735073327767E-03,-0.999983554332,0.)); +#209524 = ORIENTED_EDGE('',*,*,#209525,.T.); +#209525 = EDGE_CURVE('',#209518,#209526,#209528,.T.); +#209526 = VERTEX_POINT('',#209527); +#209527 = CARTESIAN_POINT('',(184.962514,-76.304083,1.585)); +#209528 = CIRCLE('',#209529,0.109999639072); +#209529 = AXIS2_PLACEMENT_3D('',#209530,#209531,#209532); +#209530 = CARTESIAN_POINT('',(185.0704,-76.282623,1.585)); +#209531 = DIRECTION('',(-0.,0.,-1.)); +#209532 = DIRECTION('',(0.980785036297,-0.195091549218,-0.)); +#209533 = ORIENTED_EDGE('',*,*,#209534,.T.); +#209534 = EDGE_CURVE('',#209526,#209535,#209537,.T.); +#209535 = VERTEX_POINT('',#209536); +#209536 = CARTESIAN_POINT('',(184.962514,-75.346877,1.585)); +#209537 = LINE('',#209538,#209539); +#209538 = CARTESIAN_POINT('',(184.962514,-76.304083,1.585)); +#209539 = VECTOR('',#209540,1.); +#209540 = DIRECTION('',(0.,1.,0.)); +#209541 = ORIENTED_EDGE('',*,*,#209542,.T.); +#209542 = EDGE_CURVE('',#209535,#209543,#209545,.T.); +#209543 = VERTEX_POINT('',#209544); +#209544 = CARTESIAN_POINT('',(184.978938,-75.307224,1.585)); +#209545 = LINE('',#209546,#209547); +#209546 = CARTESIAN_POINT('',(184.962514,-75.346877,1.585)); +#209547 = VECTOR('',#209548,1.); +#209548 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#209549 = ORIENTED_EDGE('',*,*,#209550,.T.); +#209550 = EDGE_CURVE('',#209543,#209474,#209551,.T.); +#209551 = LINE('',#209552,#209553); +#209552 = CARTESIAN_POINT('',(184.978938,-75.307224,1.585)); +#209553 = VECTOR('',#209554,1.); +#209554 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209555 = PLANE('',#209556); +#209556 = AXIS2_PLACEMENT_3D('',#209557,#209558,#209559); +#209557 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209558 = DIRECTION('',(0.,0.,1.)); +#209559 = DIRECTION('',(1.,0.,-0.)); +#209560 = SHELL_BASED_SURFACE_MODEL('',(#209561)); +#209561 = OPEN_SHELL('',(#209562)); +#209562 = ADVANCED_FACE('',(#209563,#209632),#209658,.T.); +#209563 = FACE_BOUND('',#209564,.F.); +#209564 = EDGE_LOOP('',(#209565,#209576,#209584,#209593,#209601,#209609, + #209617,#209626)); +#209565 = ORIENTED_EDGE('',*,*,#209566,.T.); +#209566 = EDGE_CURVE('',#209567,#209569,#209571,.T.); +#209567 = VERTEX_POINT('',#209568); +#209568 = CARTESIAN_POINT('',(142.239042,-76.083092,1.585)); +#209569 = VERTEX_POINT('',#209570); +#209570 = CARTESIAN_POINT('',(142.239042,-75.959764,1.585)); +#209571 = CIRCLE('',#209572,6.499975994818E-02); +#209572 = AXIS2_PLACEMENT_3D('',#209573,#209574,#209575); +#209573 = CARTESIAN_POINT('',(142.25959728879,-76.021428,1.585)); +#209574 = DIRECTION('',(0.,0.,-1.)); +#209575 = DIRECTION('',(-0.316236380079,-0.948680426653,-0.)); +#209576 = ORIENTED_EDGE('',*,*,#209577,.T.); +#209577 = EDGE_CURVE('',#209569,#209578,#209580,.T.); +#209578 = VERTEX_POINT('',#209579); +#209579 = CARTESIAN_POINT('',(143.139042,-75.659764,1.585)); +#209580 = LINE('',#209581,#209582); +#209581 = CARTESIAN_POINT('',(142.239042,-75.959764,1.585)); +#209582 = VECTOR('',#209583,1.); +#209583 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#209584 = ORIENTED_EDGE('',*,*,#209585,.T.); +#209585 = EDGE_CURVE('',#209578,#209586,#209588,.T.); +#209586 = VERTEX_POINT('',#209587); +#209587 = CARTESIAN_POINT('',(143.180152,-75.783093,1.585)); +#209588 = CIRCLE('',#209589,6.500014296397E-02); +#209589 = AXIS2_PLACEMENT_3D('',#209590,#209591,#209592); +#209590 = CARTESIAN_POINT('',(143.15959672008,-75.7214285933,1.585)); +#209591 = DIRECTION('',(0.,0.,-1.)); +#209592 = DIRECTION('',(-0.316225767373,0.948683964263,-0.)); +#209593 = ORIENTED_EDGE('',*,*,#209594,.T.); +#209594 = EDGE_CURVE('',#209586,#209595,#209597,.T.); +#209595 = VERTEX_POINT('',#209596); +#209596 = CARTESIAN_POINT('',(142.967454,-75.853992,1.585)); +#209597 = LINE('',#209598,#209599); +#209598 = CARTESIAN_POINT('',(143.180152,-75.783093,1.585)); +#209599 = VECTOR('',#209600,1.); +#209600 = DIRECTION('',(-0.948683744073,-0.316226427945,0.)); +#209601 = ORIENTED_EDGE('',*,*,#209602,.T.); +#209602 = EDGE_CURVE('',#209595,#209603,#209605,.T.); +#209603 = VERTEX_POINT('',#209604); +#209604 = CARTESIAN_POINT('',(142.967454,-76.188863,1.585)); +#209605 = LINE('',#209606,#209607); +#209606 = CARTESIAN_POINT('',(142.967454,-75.853992,1.585)); +#209607 = VECTOR('',#209608,1.); +#209608 = DIRECTION('',(0.,-1.,0.)); +#209609 = ORIENTED_EDGE('',*,*,#209610,.T.); +#209610 = EDGE_CURVE('',#209603,#209611,#209613,.T.); +#209611 = VERTEX_POINT('',#209612); +#209612 = CARTESIAN_POINT('',(143.180152,-76.259763,1.585)); +#209613 = LINE('',#209614,#209615); +#209614 = CARTESIAN_POINT('',(142.967454,-76.188863,1.585)); +#209615 = VECTOR('',#209616,1.); +#209616 = DIRECTION('',(0.948682406,-0.316230442155,0.)); +#209617 = ORIENTED_EDGE('',*,*,#209618,.T.); +#209618 = EDGE_CURVE('',#209611,#209619,#209621,.T.); +#209619 = VERTEX_POINT('',#209620); +#209620 = CARTESIAN_POINT('',(143.139042,-76.383092,1.585)); +#209621 = CIRCLE('',#209622,6.500014296694E-02); +#209622 = AXIS2_PLACEMENT_3D('',#209623,#209624,#209625); +#209623 = CARTESIAN_POINT('',(143.15959634729,-76.32142728242,1.585)); +#209624 = DIRECTION('',(0.,0.,-1.)); +#209625 = DIRECTION('',(0.31624011532,0.948679181527,0.)); +#209626 = ORIENTED_EDGE('',*,*,#209627,.T.); +#209627 = EDGE_CURVE('',#209619,#209567,#209628,.T.); +#209628 = LINE('',#209629,#209630); +#209629 = CARTESIAN_POINT('',(143.139042,-76.383092,1.585)); +#209630 = VECTOR('',#209631,1.); +#209631 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#209632 = FACE_BOUND('',#209633,.F.); +#209633 = EDGE_LOOP('',(#209634,#209644,#209652)); +#209634 = ORIENTED_EDGE('',*,*,#209635,.T.); +#209635 = EDGE_CURVE('',#209636,#209638,#209640,.T.); +#209636 = VERTEX_POINT('',#209637); +#209637 = CARTESIAN_POINT('',(142.465144,-76.021428,1.585)); +#209638 = VERTEX_POINT('',#209639); +#209639 = CARTESIAN_POINT('',(142.837454,-76.14553,1.585)); +#209640 = LINE('',#209641,#209642); +#209641 = CARTESIAN_POINT('',(142.465144,-76.021428,1.585)); +#209642 = VECTOR('',#209643,1.); +#209643 = DIRECTION('',(0.948684317287,-0.316224708291,0.)); +#209644 = ORIENTED_EDGE('',*,*,#209645,.T.); +#209645 = EDGE_CURVE('',#209638,#209646,#209648,.T.); +#209646 = VERTEX_POINT('',#209647); +#209647 = CARTESIAN_POINT('',(142.837454,-75.897325,1.585)); +#209648 = LINE('',#209649,#209650); +#209649 = CARTESIAN_POINT('',(142.837454,-76.14553,1.585)); +#209650 = VECTOR('',#209651,1.); +#209651 = DIRECTION('',(0.,1.,0.)); +#209652 = ORIENTED_EDGE('',*,*,#209653,.T.); +#209653 = EDGE_CURVE('',#209646,#209636,#209654,.T.); +#209654 = LINE('',#209655,#209656); +#209655 = CARTESIAN_POINT('',(142.837454,-75.897325,1.585)); +#209656 = VECTOR('',#209657,1.); +#209657 = DIRECTION('',(-0.94868355286,-0.316227001586,0.)); +#209658 = PLANE('',#209659); +#209659 = AXIS2_PLACEMENT_3D('',#209660,#209661,#209662); +#209660 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209661 = DIRECTION('',(0.,0.,1.)); +#209662 = DIRECTION('',(1.,0.,-0.)); +#209663 = SHELL_BASED_SURFACE_MODEL('',(#209664)); +#209664 = OPEN_SHELL('',(#209665)); +#209665 = ADVANCED_FACE('',(#209666,#209767),#209826,.T.); +#209666 = FACE_BOUND('',#209667,.F.); +#209667 = EDGE_LOOP('',(#209668,#209679,#209687,#209695,#209703,#209711, + #209719,#209728,#209736,#209745,#209753,#209761)); +#209668 = ORIENTED_EDGE('',*,*,#209669,.T.); +#209669 = EDGE_CURVE('',#209670,#209672,#209674,.T.); +#209670 = VERTEX_POINT('',#209671); +#209671 = CARTESIAN_POINT('',(137.228013,-75.776818,1.585)); +#209672 = VERTEX_POINT('',#209673); +#209673 = CARTESIAN_POINT('',(137.508666,-75.727575,1.585)); +#209674 = CIRCLE('',#209675,0.327183487819); +#209675 = AXIS2_PLACEMENT_3D('',#209676,#209677,#209678); +#209676 = CARTESIAN_POINT('',(137.41924076591,-76.04230053472,1.585)); +#209677 = DIRECTION('',(0.,0.,-1.)); +#209678 = DIRECTION('',(-0.584466432542,0.811417888163,0.)); +#209679 = ORIENTED_EDGE('',*,*,#209680,.T.); +#209680 = EDGE_CURVE('',#209672,#209681,#209683,.T.); +#209681 = VERTEX_POINT('',#209682); +#209682 = CARTESIAN_POINT('',(137.611273,-75.782608,1.585)); +#209683 = LINE('',#209684,#209685); +#209684 = CARTESIAN_POINT('',(137.508666,-75.727575,1.585)); +#209685 = VECTOR('',#209686,1.); +#209686 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#209687 = ORIENTED_EDGE('',*,*,#209688,.T.); +#209688 = EDGE_CURVE('',#209681,#209689,#209691,.T.); +#209689 = VERTEX_POINT('',#209690); +#209690 = CARTESIAN_POINT('',(137.666306,-75.842358,1.585)); +#209691 = LINE('',#209692,#209693); +#209692 = CARTESIAN_POINT('',(137.611273,-75.782608,1.585)); +#209693 = VECTOR('',#209694,1.); +#209694 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#209695 = ORIENTED_EDGE('',*,*,#209696,.T.); +#209696 = EDGE_CURVE('',#209689,#209697,#209699,.T.); +#209697 = VERTEX_POINT('',#209698); +#209698 = CARTESIAN_POINT('',(137.713109,-75.942485,1.585)); +#209699 = LINE('',#209700,#209701); +#209700 = CARTESIAN_POINT('',(137.666306,-75.842358,1.585)); +#209701 = VECTOR('',#209702,1.); +#209702 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#209703 = ORIENTED_EDGE('',*,*,#209704,.T.); +#209704 = EDGE_CURVE('',#209697,#209705,#209707,.T.); +#209705 = VERTEX_POINT('',#209706); +#209706 = CARTESIAN_POINT('',(137.716025,-76.234999,1.585)); +#209707 = LINE('',#209708,#209709); +#209708 = CARTESIAN_POINT('',(137.713109,-75.942485,1.585)); +#209709 = VECTOR('',#209710,1.); +#209710 = DIRECTION('',(9.968258341542E-03,-0.999950315679,0.)); +#209711 = ORIENTED_EDGE('',*,*,#209712,.T.); +#209712 = EDGE_CURVE('',#209705,#209713,#209715,.T.); +#209713 = VERTEX_POINT('',#209714); +#209714 = CARTESIAN_POINT('',(138.079597,-76.234999,1.585)); +#209715 = LINE('',#209716,#209717); +#209716 = CARTESIAN_POINT('',(137.716025,-76.234999,1.585)); +#209717 = VECTOR('',#209718,1.); +#209718 = DIRECTION('',(1.,0.,0.)); +#209719 = ORIENTED_EDGE('',*,*,#209720,.T.); +#209720 = EDGE_CURVE('',#209713,#209721,#209723,.T.); +#209721 = VERTEX_POINT('',#209722); +#209722 = CARTESIAN_POINT('',(138.079597,-76.364999,1.585)); +#209723 = CIRCLE('',#209724,6.500000000092E-02); +#209724 = AXIS2_PLACEMENT_3D('',#209725,#209726,#209727); +#209725 = CARTESIAN_POINT('',(138.07959665513,-76.299999,1.585)); +#209726 = DIRECTION('',(0.,0.,-1.)); +#209727 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#209728 = ORIENTED_EDGE('',*,*,#209729,.T.); +#209729 = EDGE_CURVE('',#209721,#209730,#209732,.T.); +#209730 = VERTEX_POINT('',#209731); +#209731 = CARTESIAN_POINT('',(137.179597,-76.364999,1.585)); +#209732 = LINE('',#209733,#209734); +#209733 = CARTESIAN_POINT('',(138.079597,-76.364999,1.585)); +#209734 = VECTOR('',#209735,1.); +#209735 = DIRECTION('',(-1.,0.,0.)); +#209736 = ORIENTED_EDGE('',*,*,#209737,.T.); +#209737 = EDGE_CURVE('',#209730,#209738,#209740,.T.); +#209738 = VERTEX_POINT('',#209739); +#209739 = CARTESIAN_POINT('',(137.114597,-76.299999,1.585)); +#209740 = CIRCLE('',#209741,6.500103935386E-02); +#209741 = AXIS2_PLACEMENT_3D('',#209742,#209743,#209744); +#209742 = CARTESIAN_POINT('',(137.17959803934,-76.29999796065,1.585)); +#209743 = DIRECTION('',(0.,0.,-1.)); +#209744 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#209745 = ORIENTED_EDGE('',*,*,#209746,.T.); +#209746 = EDGE_CURVE('',#209738,#209747,#209749,.T.); +#209747 = VERTEX_POINT('',#209748); +#209748 = CARTESIAN_POINT('',(137.117512,-75.942485,1.585)); +#209749 = LINE('',#209750,#209751); +#209750 = CARTESIAN_POINT('',(137.114597,-76.299999,1.585)); +#209751 = VECTOR('',#209752,1.); +#209752 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#209753 = ORIENTED_EDGE('',*,*,#209754,.T.); +#209754 = EDGE_CURVE('',#209747,#209755,#209757,.T.); +#209755 = VERTEX_POINT('',#209756); +#209756 = CARTESIAN_POINT('',(137.170702,-75.834129,1.585)); +#209757 = LINE('',#209758,#209759); +#209758 = CARTESIAN_POINT('',(137.117512,-75.942485,1.585)); +#209759 = VECTOR('',#209760,1.); +#209760 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#209761 = ORIENTED_EDGE('',*,*,#209762,.T.); +#209762 = EDGE_CURVE('',#209755,#209670,#209763,.T.); +#209763 = LINE('',#209764,#209765); +#209764 = CARTESIAN_POINT('',(137.170702,-75.834129,1.585)); +#209765 = VECTOR('',#209766,1.); +#209766 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209767 = FACE_BOUND('',#209768,.F.); +#209768 = EDGE_LOOP('',(#209769,#209780,#209788,#209796,#209804,#209812, + #209820)); +#209769 = ORIENTED_EDGE('',*,*,#209770,.T.); +#209770 = EDGE_CURVE('',#209771,#209773,#209775,.T.); +#209771 = VERTEX_POINT('',#209772); +#209772 = CARTESIAN_POINT('',(137.526808,-75.881991,1.585)); +#209773 = VERTEX_POINT('',#209774); +#209774 = CARTESIAN_POINT('',(137.275875,-75.909929,1.585)); +#209775 = CIRCLE('',#209776,0.180979134862); +#209776 = AXIS2_PLACEMENT_3D('',#209777,#209778,#209779); +#209777 = CARTESIAN_POINT('',(137.41569076987,-76.02484200078,1.585)); +#209778 = DIRECTION('',(0.,0.,1.)); +#209779 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#209780 = ORIENTED_EDGE('',*,*,#209781,.T.); +#209781 = EDGE_CURVE('',#209773,#209782,#209784,.T.); +#209782 = VERTEX_POINT('',#209783); +#209783 = CARTESIAN_POINT('',(137.244597,-75.972486,1.585)); +#209784 = LINE('',#209785,#209786); +#209785 = CARTESIAN_POINT('',(137.275875,-75.909929,1.585)); +#209786 = VECTOR('',#209787,1.); +#209787 = DIRECTION('',(-0.447207876355,-0.89443005055,0.)); +#209788 = ORIENTED_EDGE('',*,*,#209789,.T.); +#209789 = EDGE_CURVE('',#209782,#209790,#209792,.T.); +#209790 = VERTEX_POINT('',#209791); +#209791 = CARTESIAN_POINT('',(137.244597,-76.234999,1.585)); +#209792 = LINE('',#209793,#209794); +#209793 = CARTESIAN_POINT('',(137.244597,-75.972486,1.585)); +#209794 = VECTOR('',#209795,1.); +#209795 = DIRECTION('',(0.,-1.,0.)); +#209796 = ORIENTED_EDGE('',*,*,#209797,.T.); +#209797 = EDGE_CURVE('',#209790,#209798,#209800,.T.); +#209798 = VERTEX_POINT('',#209799); +#209799 = CARTESIAN_POINT('',(137.586025,-76.234999,1.585)); +#209800 = LINE('',#209801,#209802); +#209801 = CARTESIAN_POINT('',(137.244597,-76.234999,1.585)); +#209802 = VECTOR('',#209803,1.); +#209803 = DIRECTION('',(1.,0.,0.)); +#209804 = ORIENTED_EDGE('',*,*,#209805,.T.); +#209805 = EDGE_CURVE('',#209798,#209806,#209808,.T.); +#209806 = VERTEX_POINT('',#209807); +#209807 = CARTESIAN_POINT('',(137.586025,-75.972486,1.585)); +#209808 = LINE('',#209809,#209810); +#209809 = CARTESIAN_POINT('',(137.586025,-76.234999,1.585)); +#209810 = VECTOR('',#209811,1.); +#209811 = DIRECTION('',(0.,1.,0.)); +#209812 = ORIENTED_EDGE('',*,*,#209813,.T.); +#209813 = EDGE_CURVE('',#209806,#209814,#209816,.T.); +#209814 = VERTEX_POINT('',#209815); +#209815 = CARTESIAN_POINT('',(137.554746,-75.909929,1.585)); +#209816 = LINE('',#209817,#209818); +#209817 = CARTESIAN_POINT('',(137.586025,-75.972486,1.585)); +#209818 = VECTOR('',#209819,1.); +#209819 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#209820 = ORIENTED_EDGE('',*,*,#209821,.T.); +#209821 = EDGE_CURVE('',#209814,#209771,#209822,.T.); +#209822 = LINE('',#209823,#209824); +#209823 = CARTESIAN_POINT('',(137.554746,-75.909929,1.585)); +#209824 = VECTOR('',#209825,1.); +#209825 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209826 = PLANE('',#209827); +#209827 = AXIS2_PLACEMENT_3D('',#209828,#209829,#209830); +#209828 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209829 = DIRECTION('',(0.,0.,1.)); +#209830 = DIRECTION('',(1.,0.,-0.)); +#209831 = SHELL_BASED_SURFACE_MODEL('',(#209832)); +#209832 = OPEN_SHELL('',(#209833)); +#209833 = ADVANCED_FACE('',(#209834),#209936,.T.); +#209834 = FACE_BOUND('',#209835,.F.); +#209835 = EDGE_LOOP('',(#209836,#209846,#209855,#209863,#209871,#209880, + #209888,#209896,#209905,#209913,#209921,#209930)); +#209836 = ORIENTED_EDGE('',*,*,#209837,.T.); +#209837 = EDGE_CURVE('',#209838,#209840,#209842,.T.); +#209838 = VERTEX_POINT('',#209839); +#209839 = CARTESIAN_POINT('',(119.809596,-75.90045,1.585)); +#209840 = VERTEX_POINT('',#209841); +#209841 = CARTESIAN_POINT('',(120.223541,-75.624488,1.585)); +#209842 = LINE('',#209843,#209844); +#209843 = CARTESIAN_POINT('',(119.809596,-75.90045,1.585)); +#209844 = VECTOR('',#209845,1.); +#209845 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#209846 = ORIENTED_EDGE('',*,*,#209847,.T.); +#209847 = EDGE_CURVE('',#209840,#209848,#209850,.T.); +#209848 = VERTEX_POINT('',#209849); +#209849 = CARTESIAN_POINT('',(120.295652,-75.732654,1.585)); +#209850 = CIRCLE('',#209851,6.499976899535E-02); +#209851 = AXIS2_PLACEMENT_3D('',#209852,#209853,#209854); +#209852 = CARTESIAN_POINT('',(120.25959612917,-75.67857124722,1.585)); +#209853 = DIRECTION('',(0.,0.,-1.)); +#209854 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#209855 = ORIENTED_EDGE('',*,*,#209856,.T.); +#209856 = EDGE_CURVE('',#209848,#209857,#209859,.T.); +#209857 = VERTEX_POINT('',#209858); +#209858 = CARTESIAN_POINT('',(119.926776,-75.978571,1.585)); +#209859 = LINE('',#209860,#209861); +#209860 = CARTESIAN_POINT('',(120.295652,-75.732654,1.585)); +#209861 = VECTOR('',#209862,1.); +#209862 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#209863 = ORIENTED_EDGE('',*,*,#209864,.T.); +#209864 = EDGE_CURVE('',#209857,#209865,#209867,.T.); +#209865 = VERTEX_POINT('',#209866); +#209866 = CARTESIAN_POINT('',(120.295652,-76.224488,1.585)); +#209867 = LINE('',#209868,#209869); +#209868 = CARTESIAN_POINT('',(119.926776,-75.978571,1.585)); +#209869 = VECTOR('',#209870,1.); +#209870 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#209871 = ORIENTED_EDGE('',*,*,#209872,.T.); +#209872 = EDGE_CURVE('',#209865,#209873,#209875,.T.); +#209873 = VERTEX_POINT('',#209874); +#209874 = CARTESIAN_POINT('',(120.223541,-76.332654,1.585)); +#209875 = CIRCLE('',#209876,6.499976899541E-02); +#209876 = AXIS2_PLACEMENT_3D('',#209877,#209878,#209879); +#209877 = CARTESIAN_POINT('',(120.25959687747,-76.27857125164,1.585)); +#209878 = DIRECTION('',(0.,0.,-1.)); +#209879 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#209880 = ORIENTED_EDGE('',*,*,#209881,.T.); +#209881 = EDGE_CURVE('',#209873,#209882,#209884,.T.); +#209882 = VERTEX_POINT('',#209883); +#209883 = CARTESIAN_POINT('',(119.809596,-76.056691,1.585)); +#209884 = LINE('',#209885,#209886); +#209885 = CARTESIAN_POINT('',(120.223541,-76.332654,1.585)); +#209886 = VECTOR('',#209887,1.); +#209887 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#209888 = ORIENTED_EDGE('',*,*,#209889,.T.); +#209889 = EDGE_CURVE('',#209882,#209890,#209892,.T.); +#209890 = VERTEX_POINT('',#209891); +#209891 = CARTESIAN_POINT('',(119.395653,-76.332654,1.585)); +#209892 = LINE('',#209893,#209894); +#209893 = CARTESIAN_POINT('',(119.809596,-76.056691,1.585)); +#209894 = VECTOR('',#209895,1.); +#209895 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#209896 = ORIENTED_EDGE('',*,*,#209897,.T.); +#209897 = EDGE_CURVE('',#209890,#209898,#209900,.T.); +#209898 = VERTEX_POINT('',#209899); +#209899 = CARTESIAN_POINT('',(119.323541,-76.224488,1.585)); +#209900 = CIRCLE('',#209901,6.500004634766E-02); +#209901 = AXIS2_PLACEMENT_3D('',#209902,#209903,#209904); +#209902 = CARTESIAN_POINT('',(119.35959737004,-76.2785707533,1.585)); +#209903 = DIRECTION('',(0.,0.,-1.)); +#209904 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#209905 = ORIENTED_EDGE('',*,*,#209906,.T.); +#209906 = EDGE_CURVE('',#209898,#209907,#209909,.T.); +#209907 = VERTEX_POINT('',#209908); +#209908 = CARTESIAN_POINT('',(119.692416,-75.978571,1.585)); +#209909 = LINE('',#209910,#209911); +#209910 = CARTESIAN_POINT('',(119.323541,-76.224488,1.585)); +#209911 = VECTOR('',#209912,1.); +#209912 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#209913 = ORIENTED_EDGE('',*,*,#209914,.T.); +#209914 = EDGE_CURVE('',#209907,#209915,#209917,.T.); +#209915 = VERTEX_POINT('',#209916); +#209916 = CARTESIAN_POINT('',(119.323541,-75.732654,1.585)); +#209917 = LINE('',#209918,#209919); +#209918 = CARTESIAN_POINT('',(119.692416,-75.978571,1.585)); +#209919 = VECTOR('',#209920,1.); +#209920 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#209921 = ORIENTED_EDGE('',*,*,#209922,.T.); +#209922 = EDGE_CURVE('',#209915,#209923,#209925,.T.); +#209923 = VERTEX_POINT('',#209924); +#209924 = CARTESIAN_POINT('',(119.395653,-75.624488,1.585)); +#209925 = CIRCLE('',#209926,6.500004634723E-02); +#209926 = AXIS2_PLACEMENT_3D('',#209927,#209928,#209929); +#209927 = CARTESIAN_POINT('',(119.35959731405,-75.67857120937,1.585)); +#209928 = DIRECTION('',(0.,0.,-1.)); +#209929 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#209930 = ORIENTED_EDGE('',*,*,#209931,.T.); +#209931 = EDGE_CURVE('',#209923,#209838,#209932,.T.); +#209932 = LINE('',#209933,#209934); +#209933 = CARTESIAN_POINT('',(119.395653,-75.624488,1.585)); +#209934 = VECTOR('',#209935,1.); +#209935 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#209936 = PLANE('',#209937); +#209937 = AXIS2_PLACEMENT_3D('',#209938,#209939,#209940); +#209938 = CARTESIAN_POINT('',(0.,0.,1.585)); +#209939 = DIRECTION('',(0.,0.,1.)); +#209940 = DIRECTION('',(1.,0.,-0.)); +#209941 = SHELL_BASED_SURFACE_MODEL('',(#209942)); +#209942 = OPEN_SHELL('',(#209943)); +#209943 = ADVANCED_FACE('',(#209944,#210055),#210107,.T.); +#209944 = FACE_BOUND('',#209945,.F.); +#209945 = EDGE_LOOP('',(#209946,#209957,#209965,#209974,#209982,#209991, + #209999,#210007,#210016,#210024,#210032,#210040,#210049)); +#209946 = ORIENTED_EDGE('',*,*,#209947,.T.); +#209947 = EDGE_CURVE('',#209948,#209950,#209952,.T.); +#209948 = VERTEX_POINT('',#209949); +#209949 = CARTESIAN_POINT('',(99.888329,-75.193287,1.585)); +#209950 = VERTEX_POINT('',#209951); +#209951 = CARTESIAN_POINT('',(99.961888,-75.132919,1.585)); +#209952 = CIRCLE('',#209953,7.500074938988E-02); +#209953 = AXIS2_PLACEMENT_3D('',#209954,#209955,#209956); +#209954 = CARTESIAN_POINT('',(99.96188846611,-75.20791974938,1.585)); +#209955 = DIRECTION('',(0.,0.,-1.)); +#209956 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#209957 = ORIENTED_EDGE('',*,*,#209958,.T.); +#209958 = EDGE_CURVE('',#209950,#209959,#209961,.T.); +#209959 = VERTEX_POINT('',#209960); +#209960 = CARTESIAN_POINT('',(100.357472,-75.13436,1.585)); +#209961 = LINE('',#209962,#209963); +#209962 = CARTESIAN_POINT('',(99.961888,-75.132919,1.585)); +#209963 = VECTOR('',#209964,1.); +#209964 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#209965 = ORIENTED_EDGE('',*,*,#209966,.T.); +#209966 = EDGE_CURVE('',#209959,#209967,#209969,.T.); +#209967 = VERTEX_POINT('',#209968); +#209968 = CARTESIAN_POINT('',(100.606875,-75.383763,1.585)); +#209969 = CIRCLE('',#209970,0.347870264855); +#209970 = AXIS2_PLACEMENT_3D('',#209971,#209972,#209973); +#209971 = CARTESIAN_POINT('',(100.27014426502,-75.47109073497,1.585)); +#209972 = DIRECTION('',(0.,0.,-1.)); +#209973 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#209974 = ORIENTED_EDGE('',*,*,#209975,.T.); +#209975 = EDGE_CURVE('',#209967,#209976,#209978,.T.); +#209976 = VERTEX_POINT('',#209977); +#209977 = CARTESIAN_POINT('',(100.605653,-75.561062,1.585)); +#209978 = LINE('',#209979,#209980); +#209979 = CARTESIAN_POINT('',(100.606875,-75.383763,1.585)); +#209980 = VECTOR('',#209981,1.); +#209981 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#209982 = ORIENTED_EDGE('',*,*,#209983,.T.); +#209983 = EDGE_CURVE('',#209976,#209984,#209986,.T.); +#209984 = VERTEX_POINT('',#209985); +#209985 = CARTESIAN_POINT('',(100.357472,-75.805287,1.585)); +#209986 = CIRCLE('',#209987,0.348632345849); +#209987 = AXIS2_PLACEMENT_3D('',#209988,#209989,#209990); +#209988 = CARTESIAN_POINT('',(100.26970319403,-75.4678834593,1.585)); +#209989 = DIRECTION('',(0.,0.,-1.)); +#209990 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#209991 = ORIENTED_EDGE('',*,*,#209992,.T.); +#209992 = EDGE_CURVE('',#209984,#209993,#209995,.T.); +#209993 = VERTEX_POINT('',#209994); +#209994 = CARTESIAN_POINT('',(100.343955,-75.806618,1.585)); +#209995 = LINE('',#209996,#209997); +#209996 = CARTESIAN_POINT('',(100.357472,-75.805287,1.585)); +#209997 = VECTOR('',#209998,1.); +#209998 = DIRECTION('',(-0.995186940545,-9.799465989924E-02,0.)); +#209999 = ORIENTED_EDGE('',*,*,#210000,.T.); +#210000 = EDGE_CURVE('',#209993,#210001,#210003,.T.); +#210001 = VERTEX_POINT('',#210002); +#210002 = CARTESIAN_POINT('',(100.601969,-76.177723,1.585)); +#210003 = LINE('',#210004,#210005); +#210004 = CARTESIAN_POINT('',(100.343955,-75.806618,1.585)); +#210005 = VECTOR('',#210006,1.); +#210006 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#210007 = ORIENTED_EDGE('',*,*,#210008,.T.); +#210008 = EDGE_CURVE('',#210001,#210009,#210011,.T.); +#210009 = VERTEX_POINT('',#210010); +#210010 = CARTESIAN_POINT('',(100.471874,-76.250929,1.585)); +#210011 = CIRCLE('',#210012,7.500005951702E-02); +#210012 = AXIS2_PLACEMENT_3D('',#210013,#210014,#210015); +#210013 = CARTESIAN_POINT('',(100.53331606294,-76.20791874739,1.585)); +#210014 = DIRECTION('',(0.,0.,-1.)); +#210015 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#210016 = ORIENTED_EDGE('',*,*,#210017,.T.); +#210017 = EDGE_CURVE('',#210009,#210018,#210020,.T.); +#210018 = VERTEX_POINT('',#210019); +#210019 = CARTESIAN_POINT('',(100.160934,-75.806728,1.585)); +#210020 = LINE('',#210021,#210022); +#210021 = CARTESIAN_POINT('',(100.471874,-76.250929,1.585)); +#210022 = VECTOR('',#210023,1.); +#210023 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#210024 = ORIENTED_EDGE('',*,*,#210025,.T.); +#210025 = EDGE_CURVE('',#210018,#210026,#210028,.T.); +#210026 = VERTEX_POINT('',#210027); +#210027 = CARTESIAN_POINT('',(100.036888,-75.806728,1.585)); +#210028 = LINE('',#210029,#210030); +#210029 = CARTESIAN_POINT('',(100.160934,-75.806728,1.585)); +#210030 = VECTOR('',#210031,1.); +#210031 = DIRECTION('',(-1.,0.,0.)); +#210032 = ORIENTED_EDGE('',*,*,#210033,.T.); +#210033 = EDGE_CURVE('',#210026,#210034,#210036,.T.); +#210034 = VERTEX_POINT('',#210035); +#210035 = CARTESIAN_POINT('',(100.035447,-76.222551,1.585)); +#210036 = LINE('',#210037,#210038); +#210037 = CARTESIAN_POINT('',(100.036888,-75.806728,1.585)); +#210038 = VECTOR('',#210039,1.); +#210039 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#210040 = ORIENTED_EDGE('',*,*,#210041,.T.); +#210041 = EDGE_CURVE('',#210034,#210042,#210044,.T.); +#210042 = VERTEX_POINT('',#210043); +#210043 = CARTESIAN_POINT('',(99.886888,-76.207919,1.585)); +#210044 = CIRCLE('',#210045,7.500006711464E-02); +#210045 = AXIS2_PLACEMENT_3D('',#210046,#210047,#210048); +#210046 = CARTESIAN_POINT('',(99.961888067115,-76.20791906711,1.585)); +#210047 = DIRECTION('',(-0.,0.,-1.)); +#210048 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#210049 = ORIENTED_EDGE('',*,*,#210050,.T.); +#210050 = EDGE_CURVE('',#210042,#209948,#210051,.T.); +#210051 = LINE('',#210052,#210053); +#210052 = CARTESIAN_POINT('',(99.886888,-76.207919,1.585)); +#210053 = VECTOR('',#210054,1.); +#210054 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#210055 = FACE_BOUND('',#210056,.F.); +#210056 = EDGE_LOOP('',(#210057,#210068,#210076,#210084,#210092,#210101) + ); +#210057 = ORIENTED_EDGE('',*,*,#210058,.T.); +#210058 = EDGE_CURVE('',#210059,#210061,#210063,.T.); +#210059 = VERTEX_POINT('',#210060); +#210060 = CARTESIAN_POINT('',(100.458316,-75.4161,1.585)); +#210061 = VERTEX_POINT('',#210062); +#210062 = CARTESIAN_POINT('',(100.325135,-75.282919,1.585)); +#210063 = CIRCLE('',#210064,0.18686440374); +#210064 = AXIS2_PLACEMENT_3D('',#210065,#210066,#210067); +#210065 = CARTESIAN_POINT('',(100.277599,-75.463636,1.585)); +#210066 = DIRECTION('',(0.,0.,1.)); +#210067 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#210068 = ORIENTED_EDGE('',*,*,#210069,.T.); +#210069 = EDGE_CURVE('',#210061,#210070,#210072,.T.); +#210070 = VERTEX_POINT('',#210071); +#210071 = CARTESIAN_POINT('',(100.036888,-75.282919,1.585)); +#210072 = LINE('',#210073,#210074); +#210073 = CARTESIAN_POINT('',(100.325135,-75.282919,1.585)); +#210074 = VECTOR('',#210075,1.); +#210075 = DIRECTION('',(-1.,0.,0.)); +#210076 = ORIENTED_EDGE('',*,*,#210077,.T.); +#210077 = EDGE_CURVE('',#210070,#210078,#210080,.T.); +#210078 = VERTEX_POINT('',#210079); +#210079 = CARTESIAN_POINT('',(100.036888,-75.656728,1.585)); +#210080 = LINE('',#210081,#210082); +#210081 = CARTESIAN_POINT('',(100.036888,-75.282919,1.585)); +#210082 = VECTOR('',#210083,1.); +#210083 = DIRECTION('',(0.,-1.,0.)); +#210084 = ORIENTED_EDGE('',*,*,#210085,.T.); +#210085 = EDGE_CURVE('',#210078,#210086,#210088,.T.); +#210086 = VERTEX_POINT('',#210087); +#210087 = CARTESIAN_POINT('',(100.325135,-75.656728,1.585)); +#210088 = LINE('',#210089,#210090); +#210089 = CARTESIAN_POINT('',(100.036888,-75.656728,1.585)); +#210090 = VECTOR('',#210091,1.); +#210091 = DIRECTION('',(1.,0.,0.)); +#210092 = ORIENTED_EDGE('',*,*,#210093,.T.); +#210093 = EDGE_CURVE('',#210086,#210094,#210096,.T.); +#210094 = VERTEX_POINT('',#210095); +#210095 = CARTESIAN_POINT('',(100.458316,-75.523547,1.585)); +#210096 = CIRCLE('',#210097,0.18686440374); +#210097 = AXIS2_PLACEMENT_3D('',#210098,#210099,#210100); +#210098 = CARTESIAN_POINT('',(100.277599,-75.476011,1.585)); +#210099 = DIRECTION('',(0.,0.,1.)); +#210100 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#210101 = ORIENTED_EDGE('',*,*,#210102,.T.); +#210102 = EDGE_CURVE('',#210094,#210059,#210103,.T.); +#210103 = LINE('',#210104,#210105); +#210104 = CARTESIAN_POINT('',(100.458316,-75.523547,1.585)); +#210105 = VECTOR('',#210106,1.); +#210106 = DIRECTION('',(0.,1.,0.)); +#210107 = PLANE('',#210108); +#210108 = AXIS2_PLACEMENT_3D('',#210109,#210110,#210111); +#210109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210110 = DIRECTION('',(0.,0.,1.)); +#210111 = DIRECTION('',(1.,0.,-0.)); +#210112 = SHELL_BASED_SURFACE_MODEL('',(#210113)); +#210113 = OPEN_SHELL('',(#210114)); +#210114 = ADVANCED_FACE('',(#210115),#210167,.T.); +#210115 = FACE_BOUND('',#210116,.F.); +#210116 = EDGE_LOOP('',(#210117,#210128,#210136,#210145,#210153,#210161) + ); +#210117 = ORIENTED_EDGE('',*,*,#210118,.T.); +#210118 = EDGE_CURVE('',#210119,#210121,#210123,.T.); +#210119 = VERTEX_POINT('',#210120); +#210120 = CARTESIAN_POINT('',(100.92022,-75.478892,1.585)); +#210121 = VERTEX_POINT('',#210122); +#210122 = CARTESIAN_POINT('',(101.036888,-75.541252,1.585)); +#210123 = CIRCLE('',#210124,7.500000000004E-02); +#210124 = AXIS2_PLACEMENT_3D('',#210125,#210126,#210127); +#210125 = CARTESIAN_POINT('',(100.961888,-75.54125206555,1.585)); +#210126 = DIRECTION('',(0.,0.,-1.)); +#210127 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#210128 = ORIENTED_EDGE('',*,*,#210129,.T.); +#210129 = EDGE_CURVE('',#210121,#210130,#210132,.T.); +#210130 = VERTEX_POINT('',#210131); +#210131 = CARTESIAN_POINT('',(101.035447,-76.222551,1.585)); +#210132 = LINE('',#210133,#210134); +#210133 = CARTESIAN_POINT('',(101.036888,-75.541252,1.585)); +#210134 = VECTOR('',#210135,1.); +#210135 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#210136 = ORIENTED_EDGE('',*,*,#210137,.T.); +#210137 = EDGE_CURVE('',#210130,#210138,#210140,.T.); +#210138 = VERTEX_POINT('',#210139); +#210139 = CARTESIAN_POINT('',(100.886888,-76.207919,1.585)); +#210140 = CIRCLE('',#210141,7.500006711464E-02); +#210141 = AXIS2_PLACEMENT_3D('',#210142,#210143,#210144); +#210142 = CARTESIAN_POINT('',(100.96188806711,-76.20791906711,1.585)); +#210143 = DIRECTION('',(-0.,0.,-1.)); +#210144 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#210145 = ORIENTED_EDGE('',*,*,#210146,.T.); +#210146 = EDGE_CURVE('',#210138,#210147,#210149,.T.); +#210147 = VERTEX_POINT('',#210148); +#210148 = CARTESIAN_POINT('',(100.888329,-75.52662,1.585)); +#210149 = LINE('',#210150,#210151); +#210150 = CARTESIAN_POINT('',(100.886888,-76.207919,1.585)); +#210151 = VECTOR('',#210152,1.); +#210152 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#210153 = ORIENTED_EDGE('',*,*,#210154,.T.); +#210154 = EDGE_CURVE('',#210147,#210155,#210157,.T.); +#210155 = VERTEX_POINT('',#210156); +#210156 = CARTESIAN_POINT('',(100.899528,-75.499584,1.585)); +#210157 = LINE('',#210158,#210159); +#210158 = CARTESIAN_POINT('',(100.888329,-75.52662,1.585)); +#210159 = VECTOR('',#210160,1.); +#210160 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#210161 = ORIENTED_EDGE('',*,*,#210162,.T.); +#210162 = EDGE_CURVE('',#210155,#210119,#210163,.T.); +#210163 = LINE('',#210164,#210165); +#210164 = CARTESIAN_POINT('',(100.899528,-75.499584,1.585)); +#210165 = VECTOR('',#210166,1.); +#210166 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#210167 = PLANE('',#210168); +#210168 = AXIS2_PLACEMENT_3D('',#210169,#210170,#210171); +#210169 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210170 = DIRECTION('',(0.,0.,1.)); +#210171 = DIRECTION('',(1.,0.,-0.)); +#210172 = SHELL_BASED_SURFACE_MODEL('',(#210173)); +#210173 = OPEN_SHELL('',(#210174)); +#210174 = ADVANCED_FACE('',(#210175,#210293),#210361,.T.); +#210175 = FACE_BOUND('',#210176,.F.); +#210176 = EDGE_LOOP('',(#210177,#210188,#210196,#210204,#210213,#210221, + #210230,#210238,#210246,#210255,#210263,#210271,#210279,#210287)); +#210177 = ORIENTED_EDGE('',*,*,#210178,.T.); +#210178 = EDGE_CURVE('',#210179,#210181,#210183,.T.); +#210179 = VERTEX_POINT('',#210180); +#210180 = CARTESIAN_POINT('',(102.301172,-75.145559,1.585)); +#210181 = VERTEX_POINT('',#210182); +#210182 = CARTESIAN_POINT('',(102.41784,-75.207919,1.585)); +#210183 = CIRCLE('',#210184,7.500000000003E-02); +#210184 = AXIS2_PLACEMENT_3D('',#210185,#210186,#210187); +#210185 = CARTESIAN_POINT('',(102.34284,-75.20791906555,1.585)); +#210186 = DIRECTION('',(0.,0.,-1.)); +#210187 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#210188 = ORIENTED_EDGE('',*,*,#210189,.T.); +#210189 = EDGE_CURVE('',#210181,#210190,#210192,.T.); +#210190 = VERTEX_POINT('',#210191); +#210191 = CARTESIAN_POINT('',(102.418268,-75.468915,1.585)); +#210192 = LINE('',#210193,#210194); +#210193 = CARTESIAN_POINT('',(102.41784,-75.207919,1.585)); +#210194 = VECTOR('',#210195,1.); +#210195 = DIRECTION('',(1.639869670478E-03,-0.999998655413,0.)); +#210196 = ORIENTED_EDGE('',*,*,#210197,.T.); +#210197 = EDGE_CURVE('',#210190,#210198,#210200,.T.); +#210198 = VERTEX_POINT('',#210199); +#210199 = CARTESIAN_POINT('',(102.648363,-75.468915,1.585)); +#210200 = LINE('',#210201,#210202); +#210201 = CARTESIAN_POINT('',(102.418268,-75.468915,1.585)); +#210202 = VECTOR('',#210203,1.); +#210203 = DIRECTION('',(1.,0.,0.)); +#210204 = ORIENTED_EDGE('',*,*,#210205,.T.); +#210205 = EDGE_CURVE('',#210198,#210206,#210208,.T.); +#210206 = VERTEX_POINT('',#210207); +#210207 = CARTESIAN_POINT('',(102.892589,-75.717096,1.585)); +#210208 = CIRCLE('',#210209,0.348625649748); +#210209 = AXIS2_PLACEMENT_3D('',#210210,#210211,#210212); +#210210 = CARTESIAN_POINT('',(102.55519104586,-75.80485968387,1.585)); +#210211 = DIRECTION('',(0.,0.,-1.)); +#210212 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#210213 = ORIENTED_EDGE('',*,*,#210214,.T.); +#210214 = EDGE_CURVE('',#210206,#210215,#210217,.T.); +#210215 = VERTEX_POINT('',#210216); +#210216 = CARTESIAN_POINT('',(102.891367,-76.037252,1.585)); +#210217 = LINE('',#210218,#210219); +#210218 = CARTESIAN_POINT('',(102.892589,-75.717096,1.585)); +#210219 = VECTOR('',#210220,1.); +#210220 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#210221 = ORIENTED_EDGE('',*,*,#210222,.T.); +#210222 = EDGE_CURVE('',#210215,#210223,#210225,.T.); +#210223 = VERTEX_POINT('',#210224); +#210224 = CARTESIAN_POINT('',(102.643186,-76.281478,1.585)); +#210225 = CIRCLE('',#210226,0.348635327447); +#210226 = AXIS2_PLACEMENT_3D('',#210227,#210228,#210229); +#210227 = CARTESIAN_POINT('',(102.55541448129,-75.94407208415,1.585)); +#210228 = DIRECTION('',(0.,0.,-1.)); +#210229 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#210230 = ORIENTED_EDGE('',*,*,#210231,.T.); +#210231 = EDGE_CURVE('',#210223,#210232,#210234,.T.); +#210232 = VERTEX_POINT('',#210233); +#210233 = CARTESIAN_POINT('',(102.418268,-76.280256,1.585)); +#210234 = LINE('',#210235,#210236); +#210235 = CARTESIAN_POINT('',(102.643186,-76.281478,1.585)); +#210236 = VECTOR('',#210237,1.); +#210237 = DIRECTION('',(-0.999985241087,5.433010984541E-03,0.)); +#210238 = ORIENTED_EDGE('',*,*,#210239,.T.); +#210239 = EDGE_CURVE('',#210232,#210240,#210242,.T.); +#210240 = VERTEX_POINT('',#210241); +#210241 = CARTESIAN_POINT('',(102.388036,-76.26675,1.585)); +#210242 = LINE('',#210243,#210244); +#210243 = CARTESIAN_POINT('',(102.418268,-76.280256,1.585)); +#210244 = VECTOR('',#210245,1.); +#210245 = DIRECTION('',(-0.913030248774,0.407891854324,0.)); +#210246 = ORIENTED_EDGE('',*,*,#210247,.T.); +#210247 = EDGE_CURVE('',#210240,#210248,#210250,.T.); +#210248 = VERTEX_POINT('',#210249); +#210249 = CARTESIAN_POINT('',(102.301172,-76.270279,1.585)); +#210250 = CIRCLE('',#210251,7.226397606086E-02); +#210251 = AXIS2_PLACEMENT_3D('',#210252,#210253,#210254); +#210252 = CARTESIAN_POINT('',(102.34226059538,-76.21083314593,1.585)); +#210253 = DIRECTION('',(-0.,0.,-1.)); +#210254 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#210255 = ORIENTED_EDGE('',*,*,#210256,.T.); +#210256 = EDGE_CURVE('',#210248,#210257,#210259,.T.); +#210257 = VERTEX_POINT('',#210258); +#210258 = CARTESIAN_POINT('',(102.28048,-76.249587,1.585)); +#210259 = LINE('',#210260,#210261); +#210260 = CARTESIAN_POINT('',(102.301172,-76.270279,1.585)); +#210261 = VECTOR('',#210262,1.); +#210262 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210263 = ORIENTED_EDGE('',*,*,#210264,.T.); +#210264 = EDGE_CURVE('',#210257,#210265,#210267,.T.); +#210265 = VERTEX_POINT('',#210266); +#210266 = CARTESIAN_POINT('',(102.26784,-76.207919,1.585)); +#210267 = LINE('',#210268,#210269); +#210268 = CARTESIAN_POINT('',(102.28048,-76.249587,1.585)); +#210269 = VECTOR('',#210270,1.); +#210270 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#210271 = ORIENTED_EDGE('',*,*,#210272,.T.); +#210272 = EDGE_CURVE('',#210265,#210273,#210275,.T.); +#210273 = VERTEX_POINT('',#210274); +#210274 = CARTESIAN_POINT('',(102.269281,-75.193287,1.585)); +#210275 = LINE('',#210276,#210277); +#210276 = CARTESIAN_POINT('',(102.26784,-76.207919,1.585)); +#210277 = VECTOR('',#210278,1.); +#210278 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#210279 = ORIENTED_EDGE('',*,*,#210280,.T.); +#210280 = EDGE_CURVE('',#210273,#210281,#210283,.T.); +#210281 = VERTEX_POINT('',#210282); +#210282 = CARTESIAN_POINT('',(102.28048,-75.166251,1.585)); +#210283 = LINE('',#210284,#210285); +#210284 = CARTESIAN_POINT('',(102.269281,-75.193287,1.585)); +#210285 = VECTOR('',#210286,1.); +#210286 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#210287 = ORIENTED_EDGE('',*,*,#210288,.T.); +#210288 = EDGE_CURVE('',#210281,#210179,#210289,.T.); +#210289 = LINE('',#210290,#210291); +#210290 = CARTESIAN_POINT('',(102.28048,-75.166251,1.585)); +#210291 = VECTOR('',#210292,1.); +#210292 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#210293 = FACE_BOUND('',#210294,.F.); +#210294 = EDGE_LOOP('',(#210295,#210306,#210314,#210322,#210330,#210338, + #210346,#210355)); +#210295 = ORIENTED_EDGE('',*,*,#210296,.T.); +#210296 = EDGE_CURVE('',#210297,#210299,#210301,.T.); +#210297 = VERTEX_POINT('',#210298); +#210298 = CARTESIAN_POINT('',(102.74403,-75.749433,1.585)); +#210299 = VERTEX_POINT('',#210300); +#210300 = CARTESIAN_POINT('',(102.610849,-75.616252,1.585)); +#210301 = CIRCLE('',#210302,0.18686440374); +#210302 = AXIS2_PLACEMENT_3D('',#210303,#210304,#210305); +#210303 = CARTESIAN_POINT('',(102.563313,-75.796969,1.585)); +#210304 = DIRECTION('',(0.,0.,1.)); +#210305 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#210306 = ORIENTED_EDGE('',*,*,#210307,.T.); +#210307 = EDGE_CURVE('',#210299,#210308,#210310,.T.); +#210308 = VERTEX_POINT('',#210309); +#210309 = CARTESIAN_POINT('',(102.455783,-75.616252,1.585)); +#210310 = LINE('',#210311,#210312); +#210311 = CARTESIAN_POINT('',(102.610849,-75.616252,1.585)); +#210312 = VECTOR('',#210313,1.); +#210313 = DIRECTION('',(-1.,0.,0.)); +#210314 = ORIENTED_EDGE('',*,*,#210315,.T.); +#210315 = EDGE_CURVE('',#210308,#210316,#210318,.T.); +#210316 = VERTEX_POINT('',#210317); +#210317 = CARTESIAN_POINT('',(102.41784,-75.635223,1.585)); +#210318 = LINE('',#210319,#210320); +#210319 = CARTESIAN_POINT('',(102.455783,-75.616252,1.585)); +#210320 = VECTOR('',#210321,1.); +#210321 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#210322 = ORIENTED_EDGE('',*,*,#210323,.T.); +#210323 = EDGE_CURVE('',#210316,#210324,#210326,.T.); +#210324 = VERTEX_POINT('',#210325); +#210325 = CARTESIAN_POINT('',(102.41784,-76.113947,1.585)); +#210326 = LINE('',#210327,#210328); +#210327 = CARTESIAN_POINT('',(102.41784,-75.635223,1.585)); +#210328 = VECTOR('',#210329,1.); +#210329 = DIRECTION('',(0.,-1.,0.)); +#210330 = ORIENTED_EDGE('',*,*,#210331,.T.); +#210331 = EDGE_CURVE('',#210324,#210332,#210334,.T.); +#210332 = VERTEX_POINT('',#210333); +#210333 = CARTESIAN_POINT('',(102.455783,-76.132919,1.585)); +#210334 = LINE('',#210335,#210336); +#210335 = CARTESIAN_POINT('',(102.41784,-76.113947,1.585)); +#210336 = VECTOR('',#210337,1.); +#210337 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#210338 = ORIENTED_EDGE('',*,*,#210339,.T.); +#210339 = EDGE_CURVE('',#210332,#210340,#210342,.T.); +#210340 = VERTEX_POINT('',#210341); +#210341 = CARTESIAN_POINT('',(102.610849,-76.132919,1.585)); +#210342 = LINE('',#210343,#210344); +#210343 = CARTESIAN_POINT('',(102.455783,-76.132919,1.585)); +#210344 = VECTOR('',#210345,1.); +#210345 = DIRECTION('',(1.,0.,0.)); +#210346 = ORIENTED_EDGE('',*,*,#210347,.T.); +#210347 = EDGE_CURVE('',#210340,#210348,#210350,.T.); +#210348 = VERTEX_POINT('',#210349); +#210349 = CARTESIAN_POINT('',(102.74403,-75.999737,1.585)); +#210350 = CIRCLE('',#210351,0.186867760544); +#210351 = AXIS2_PLACEMENT_3D('',#210352,#210353,#210354); +#210352 = CARTESIAN_POINT('',(102.56330996928,-75.95219932622,1.585)); +#210353 = DIRECTION('',(0.,0.,1.)); +#210354 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#210355 = ORIENTED_EDGE('',*,*,#210356,.T.); +#210356 = EDGE_CURVE('',#210348,#210297,#210357,.T.); +#210357 = LINE('',#210358,#210359); +#210358 = CARTESIAN_POINT('',(102.74403,-75.999737,1.585)); +#210359 = VECTOR('',#210360,1.); +#210360 = DIRECTION('',(0.,1.,0.)); +#210361 = PLANE('',#210362); +#210362 = AXIS2_PLACEMENT_3D('',#210363,#210364,#210365); +#210363 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210364 = DIRECTION('',(0.,0.,1.)); +#210365 = DIRECTION('',(1.,0.,-0.)); +#210366 = SHELL_BASED_SURFACE_MODEL('',(#210367)); +#210367 = OPEN_SHELL('',(#210368)); +#210368 = ADVANCED_FACE('',(#210369,#210470),#210545,.T.); +#210369 = FACE_BOUND('',#210370,.F.); +#210370 = EDGE_LOOP('',(#210371,#210382,#210390,#210398,#210406,#210414, + #210422,#210431,#210439,#210448,#210456,#210464)); +#210371 = ORIENTED_EDGE('',*,*,#210372,.T.); +#210372 = EDGE_CURVE('',#210373,#210375,#210377,.T.); +#210373 = VERTEX_POINT('',#210374); +#210374 = CARTESIAN_POINT('',(152.51087,-75.733961,1.585)); +#210375 = VERTEX_POINT('',#210376); +#210376 = CARTESIAN_POINT('',(152.941693,-75.636552,1.585)); +#210377 = CIRCLE('',#210378,0.670538401945); +#210378 = AXIS2_PLACEMENT_3D('',#210379,#210380,#210381); +#210379 = CARTESIAN_POINT('',(152.86590657351,-76.30279382249,1.585)); +#210380 = DIRECTION('',(0.,0.,-1.)); +#210381 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#210382 = ORIENTED_EDGE('',*,*,#210383,.T.); +#210383 = EDGE_CURVE('',#210375,#210384,#210386,.T.); +#210384 = VERTEX_POINT('',#210385); +#210385 = CARTESIAN_POINT('',(153.13438,-75.684718,1.585)); +#210386 = LINE('',#210387,#210388); +#210387 = CARTESIAN_POINT('',(152.941693,-75.636552,1.585)); +#210388 = VECTOR('',#210389,1.); +#210389 = DIRECTION('',(0.970149311613,-0.242508377541,0.)); +#210390 = ORIENTED_EDGE('',*,*,#210391,.T.); +#210391 = EDGE_CURVE('',#210384,#210392,#210394,.T.); +#210392 = VERTEX_POINT('',#210393); +#210393 = CARTESIAN_POINT('',(153.236987,-75.739751,1.585)); +#210394 = LINE('',#210395,#210396); +#210395 = CARTESIAN_POINT('',(153.13438,-75.684718,1.585)); +#210396 = VECTOR('',#210397,1.); +#210397 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#210398 = ORIENTED_EDGE('',*,*,#210399,.T.); +#210399 = EDGE_CURVE('',#210392,#210400,#210402,.T.); +#210400 = VERTEX_POINT('',#210401); +#210401 = CARTESIAN_POINT('',(153.330999,-75.837884,1.585)); +#210402 = LINE('',#210403,#210404); +#210403 = CARTESIAN_POINT('',(153.236987,-75.739751,1.585)); +#210404 = VECTOR('',#210405,1.); +#210405 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#210406 = ORIENTED_EDGE('',*,*,#210407,.T.); +#210407 = EDGE_CURVE('',#210400,#210408,#210410,.T.); +#210408 = VERTEX_POINT('',#210409); +#210409 = CARTESIAN_POINT('',(153.382563,-75.989776,1.585)); +#210410 = LINE('',#210411,#210412); +#210411 = CARTESIAN_POINT('',(153.330999,-75.837884,1.585)); +#210412 = VECTOR('',#210413,1.); +#210413 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#210414 = ORIENTED_EDGE('',*,*,#210415,.T.); +#210415 = EDGE_CURVE('',#210408,#210416,#210418,.T.); +#210416 = VERTEX_POINT('',#210417); +#210417 = CARTESIAN_POINT('',(153.384597,-76.214285,1.585)); +#210418 = LINE('',#210419,#210420); +#210419 = CARTESIAN_POINT('',(153.382563,-75.989776,1.585)); +#210420 = VECTOR('',#210421,1.); +#210421 = DIRECTION('',(9.05939864485E-03,-0.999958962806,0.)); +#210422 = ORIENTED_EDGE('',*,*,#210423,.T.); +#210423 = EDGE_CURVE('',#210416,#210424,#210426,.T.); +#210424 = VERTEX_POINT('',#210425); +#210425 = CARTESIAN_POINT('',(153.319597,-76.279285,1.585)); +#210426 = CIRCLE('',#210427,6.500103935391E-02); +#210427 = AXIS2_PLACEMENT_3D('',#210428,#210429,#210430); +#210428 = CARTESIAN_POINT('',(153.31959596065,-76.21428396065,1.585)); +#210429 = DIRECTION('',(0.,0.,-1.)); +#210430 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#210431 = ORIENTED_EDGE('',*,*,#210432,.T.); +#210432 = EDGE_CURVE('',#210424,#210433,#210435,.T.); +#210433 = VERTEX_POINT('',#210434); +#210434 = CARTESIAN_POINT('',(152.419597,-76.279285,1.585)); +#210435 = LINE('',#210436,#210437); +#210436 = CARTESIAN_POINT('',(153.319597,-76.279285,1.585)); +#210437 = VECTOR('',#210438,1.); +#210438 = DIRECTION('',(-1.,0.,0.)); +#210439 = ORIENTED_EDGE('',*,*,#210440,.T.); +#210440 = EDGE_CURVE('',#210433,#210441,#210443,.T.); +#210441 = VERTEX_POINT('',#210442); +#210442 = CARTESIAN_POINT('',(152.354597,-76.214285,1.585)); +#210443 = CIRCLE('',#210444,6.500103935386E-02); +#210444 = AXIS2_PLACEMENT_3D('',#210445,#210446,#210447); +#210445 = CARTESIAN_POINT('',(152.41959803934,-76.21428396065,1.585)); +#210446 = DIRECTION('',(0.,0.,-1.)); +#210447 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#210448 = ORIENTED_EDGE('',*,*,#210449,.T.); +#210449 = EDGE_CURVE('',#210441,#210450,#210452,.T.); +#210450 = VERTEX_POINT('',#210451); +#210451 = CARTESIAN_POINT('',(152.35663,-75.989776,1.585)); +#210452 = LINE('',#210453,#210454); +#210453 = CARTESIAN_POINT('',(152.354597,-76.214285,1.585)); +#210454 = VECTOR('',#210455,1.); +#210455 = DIRECTION('',(9.05494502838E-03,0.999959003145,0.)); +#210456 = ORIENTED_EDGE('',*,*,#210457,.T.); +#210457 = EDGE_CURVE('',#210450,#210458,#210460,.T.); +#210458 = VERTEX_POINT('',#210459); +#210459 = CARTESIAN_POINT('',(152.408191,-75.837888,1.585)); +#210460 = LINE('',#210461,#210462); +#210461 = CARTESIAN_POINT('',(152.35663,-75.989776,1.585)); +#210462 = VECTOR('',#210463,1.); +#210463 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#210464 = ORIENTED_EDGE('',*,*,#210465,.T.); +#210465 = EDGE_CURVE('',#210458,#210373,#210466,.T.); +#210466 = LINE('',#210467,#210468); +#210467 = CARTESIAN_POINT('',(152.408191,-75.837888,1.585)); +#210468 = VECTOR('',#210469,1.); +#210469 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#210470 = FACE_BOUND('',#210471,.F.); +#210471 = EDGE_LOOP('',(#210472,#210483,#210491,#210499,#210507,#210515, + #210523,#210531,#210539)); +#210472 = ORIENTED_EDGE('',*,*,#210473,.T.); +#210473 = EDGE_CURVE('',#210474,#210476,#210478,.T.); +#210474 = VERTEX_POINT('',#210475); +#210475 = CARTESIAN_POINT('',(153.082622,-75.804184,1.585)); +#210476 = VERTEX_POINT('',#210477); +#210477 = CARTESIAN_POINT('',(152.586669,-75.839134,1.585)); +#210478 = CIRCLE('',#210479,0.559258743581); +#210479 = AXIS2_PLACEMENT_3D('',#210480,#210481,#210482); +#210480 = CARTESIAN_POINT('',(152.86986183298,-76.32139136035,1.585)); +#210481 = DIRECTION('',(0.,0.,1.)); +#210482 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#210483 = ORIENTED_EDGE('',*,*,#210484,.T.); +#210484 = EDGE_CURVE('',#210476,#210485,#210487,.T.); +#210485 = VERTEX_POINT('',#210486); +#210486 = CARTESIAN_POINT('',(152.519265,-75.90654,1.585)); +#210487 = LINE('',#210488,#210489); +#210488 = CARTESIAN_POINT('',(152.586669,-75.839134,1.585)); +#210489 = VECTOR('',#210490,1.); +#210490 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#210491 = ORIENTED_EDGE('',*,*,#210492,.T.); +#210492 = EDGE_CURVE('',#210485,#210493,#210495,.T.); +#210493 = VERTEX_POINT('',#210494); +#210494 = CARTESIAN_POINT('',(152.484597,-76.010546,1.585)); +#210495 = LINE('',#210496,#210497); +#210496 = CARTESIAN_POINT('',(152.519265,-75.90654,1.585)); +#210497 = VECTOR('',#210498,1.); +#210498 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#210499 = ORIENTED_EDGE('',*,*,#210500,.T.); +#210500 = EDGE_CURVE('',#210493,#210501,#210503,.T.); +#210501 = VERTEX_POINT('',#210502); +#210502 = CARTESIAN_POINT('',(152.484597,-76.149285,1.585)); +#210503 = LINE('',#210504,#210505); +#210504 = CARTESIAN_POINT('',(152.484597,-76.010546,1.585)); +#210505 = VECTOR('',#210506,1.); +#210506 = DIRECTION('',(0.,-1.,0.)); +#210507 = ORIENTED_EDGE('',*,*,#210508,.T.); +#210508 = EDGE_CURVE('',#210501,#210509,#210511,.T.); +#210509 = VERTEX_POINT('',#210510); +#210510 = CARTESIAN_POINT('',(153.254597,-76.149285,1.585)); +#210511 = LINE('',#210512,#210513); +#210512 = CARTESIAN_POINT('',(152.484597,-76.149285,1.585)); +#210513 = VECTOR('',#210514,1.); +#210514 = DIRECTION('',(1.,0.,0.)); +#210515 = ORIENTED_EDGE('',*,*,#210516,.T.); +#210516 = EDGE_CURVE('',#210509,#210517,#210519,.T.); +#210517 = VERTEX_POINT('',#210518); +#210518 = CARTESIAN_POINT('',(153.254597,-76.010546,1.585)); +#210519 = LINE('',#210520,#210521); +#210520 = CARTESIAN_POINT('',(153.254597,-76.149285,1.585)); +#210521 = VECTOR('',#210522,1.); +#210522 = DIRECTION('',(0.,1.,0.)); +#210523 = ORIENTED_EDGE('',*,*,#210524,.T.); +#210524 = EDGE_CURVE('',#210517,#210525,#210527,.T.); +#210525 = VERTEX_POINT('',#210526); +#210526 = CARTESIAN_POINT('',(153.219928,-75.90654,1.585)); +#210527 = LINE('',#210528,#210529); +#210528 = CARTESIAN_POINT('',(153.254597,-76.010546,1.585)); +#210529 = VECTOR('',#210530,1.); +#210530 = DIRECTION('',(-0.316230502441,0.948682385905,0.)); +#210531 = ORIENTED_EDGE('',*,*,#210532,.T.); +#210532 = EDGE_CURVE('',#210525,#210533,#210535,.T.); +#210533 = VERTEX_POINT('',#210534); +#210534 = CARTESIAN_POINT('',(153.152522,-75.839134,1.585)); +#210535 = LINE('',#210536,#210537); +#210536 = CARTESIAN_POINT('',(153.219928,-75.90654,1.585)); +#210537 = VECTOR('',#210538,1.); +#210538 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210539 = ORIENTED_EDGE('',*,*,#210540,.T.); +#210540 = EDGE_CURVE('',#210533,#210474,#210541,.T.); +#210541 = LINE('',#210542,#210543); +#210542 = CARTESIAN_POINT('',(153.152522,-75.839134,1.585)); +#210543 = VECTOR('',#210544,1.); +#210544 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#210545 = PLANE('',#210546); +#210546 = AXIS2_PLACEMENT_3D('',#210547,#210548,#210549); +#210547 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210548 = DIRECTION('',(0.,0.,1.)); +#210549 = DIRECTION('',(1.,0.,-0.)); +#210550 = SHELL_BASED_SURFACE_MODEL('',(#210551)); +#210551 = OPEN_SHELL('',(#210552)); +#210552 = ADVANCED_FACE('',(#210553),#210622,.T.); +#210553 = FACE_BOUND('',#210554,.F.); +#210554 = EDGE_LOOP('',(#210555,#210566,#210574,#210583,#210591,#210600, + #210608,#210616)); +#210555 = ORIENTED_EDGE('',*,*,#210556,.T.); +#210556 = EDGE_CURVE('',#210557,#210559,#210561,.T.); +#210557 = VERTEX_POINT('',#210558); +#210558 = CARTESIAN_POINT('',(140.559545,-75.717982,1.585)); +#210559 = VERTEX_POINT('',#210560); +#210560 = CARTESIAN_POINT('',(140.684597,-75.742856,1.585)); +#210561 = CIRCLE('',#210562,6.499988811647E-02); +#210562 = AXIS2_PLACEMENT_3D('',#210563,#210564,#210565); +#210563 = CARTESIAN_POINT('',(140.61959711188,-75.7428562701,1.585)); +#210564 = DIRECTION('',(0.,0.,-1.)); +#210565 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#210566 = ORIENTED_EDGE('',*,*,#210567,.T.); +#210567 = EDGE_CURVE('',#210559,#210568,#210570,.T.); +#210568 = VERTEX_POINT('',#210569); +#210569 = CARTESIAN_POINT('',(140.684597,-76.171428,1.585)); +#210570 = LINE('',#210571,#210572); +#210571 = CARTESIAN_POINT('',(140.684597,-75.742856,1.585)); +#210572 = VECTOR('',#210573,1.); +#210573 = DIRECTION('',(0.,-1.,0.)); +#210574 = ORIENTED_EDGE('',*,*,#210575,.T.); +#210575 = EDGE_CURVE('',#210568,#210576,#210578,.T.); +#210576 = VERTEX_POINT('',#210577); +#210577 = CARTESIAN_POINT('',(140.619597,-76.236428,1.585)); +#210578 = CIRCLE('',#210579,6.500103935382E-02); +#210579 = AXIS2_PLACEMENT_3D('',#210580,#210581,#210582); +#210580 = CARTESIAN_POINT('',(140.61959596065,-76.17142696065,1.585)); +#210581 = DIRECTION('',(0.,0.,-1.)); +#210582 = DIRECTION('',(0.999999999872,-1.598967561772E-05,0.)); +#210583 = ORIENTED_EDGE('',*,*,#210584,.T.); +#210584 = EDGE_CURVE('',#210576,#210585,#210587,.T.); +#210585 = VERTEX_POINT('',#210586); +#210586 = CARTESIAN_POINT('',(139.719597,-76.236428,1.585)); +#210587 = LINE('',#210588,#210589); +#210588 = CARTESIAN_POINT('',(140.619597,-76.236428,1.585)); +#210589 = VECTOR('',#210590,1.); +#210590 = DIRECTION('',(-1.,0.,0.)); +#210591 = ORIENTED_EDGE('',*,*,#210592,.T.); +#210592 = EDGE_CURVE('',#210585,#210593,#210595,.T.); +#210593 = VERTEX_POINT('',#210594); +#210594 = CARTESIAN_POINT('',(139.719597,-76.106428,1.585)); +#210595 = CIRCLE('',#210596,6.500000000092E-02); +#210596 = AXIS2_PLACEMENT_3D('',#210597,#210598,#210599); +#210597 = CARTESIAN_POINT('',(139.71959734486,-76.171428,1.585)); +#210598 = DIRECTION('',(0.,0.,-1.)); +#210599 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#210600 = ORIENTED_EDGE('',*,*,#210601,.T.); +#210601 = EDGE_CURVE('',#210593,#210602,#210604,.T.); +#210602 = VERTEX_POINT('',#210603); +#210603 = CARTESIAN_POINT('',(140.554597,-76.106428,1.585)); +#210604 = LINE('',#210605,#210606); +#210605 = CARTESIAN_POINT('',(139.719597,-76.106428,1.585)); +#210606 = VECTOR('',#210607,1.); +#210607 = DIRECTION('',(1.,0.,0.)); +#210608 = ORIENTED_EDGE('',*,*,#210609,.T.); +#210609 = EDGE_CURVE('',#210602,#210610,#210612,.T.); +#210610 = VERTEX_POINT('',#210611); +#210611 = CARTESIAN_POINT('',(140.554597,-75.742856,1.585)); +#210612 = LINE('',#210613,#210614); +#210613 = CARTESIAN_POINT('',(140.554597,-76.106428,1.585)); +#210614 = VECTOR('',#210615,1.); +#210615 = DIRECTION('',(0.,1.,0.)); +#210616 = ORIENTED_EDGE('',*,*,#210617,.T.); +#210617 = EDGE_CURVE('',#210610,#210557,#210618,.T.); +#210618 = LINE('',#210619,#210620); +#210619 = CARTESIAN_POINT('',(140.554597,-75.742856,1.585)); +#210620 = VECTOR('',#210621,1.); +#210621 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#210622 = PLANE('',#210623); +#210623 = AXIS2_PLACEMENT_3D('',#210624,#210625,#210626); +#210624 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210625 = DIRECTION('',(0.,0.,1.)); +#210626 = DIRECTION('',(1.,0.,-0.)); +#210627 = SHELL_BASED_SURFACE_MODEL('',(#210628)); +#210628 = OPEN_SHELL('',(#210629)); +#210629 = ADVANCED_FACE('',(#210630,#210700),#210734,.T.); +#210630 = FACE_BOUND('',#210631,.F.); +#210631 = EDGE_LOOP('',(#210632,#210643,#210651,#210660,#210668,#210677, + #210685,#210694)); +#210632 = ORIENTED_EDGE('',*,*,#210633,.T.); +#210633 = EDGE_CURVE('',#210634,#210636,#210638,.T.); +#210634 = VERTEX_POINT('',#210635); +#210635 = CARTESIAN_POINT('',(108.40165,-72.7731,1.585)); +#210636 = VERTEX_POINT('',#210637); +#210637 = CARTESIAN_POINT('',(108.46165,-72.7131,1.585)); +#210638 = CIRCLE('',#210639,5.999932016259E-02); +#210639 = AXIS2_PLACEMENT_3D('',#210640,#210641,#210642); +#210640 = CARTESIAN_POINT('',(108.46164932015,-72.77309932015,1.585)); +#210641 = DIRECTION('',(0.,0.,-1.)); +#210642 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#210643 = ORIENTED_EDGE('',*,*,#210644,.T.); +#210644 = EDGE_CURVE('',#210636,#210645,#210647,.T.); +#210645 = VERTEX_POINT('',#210646); +#210646 = CARTESIAN_POINT('',(156.78165,-72.7131,1.585)); +#210647 = LINE('',#210648,#210649); +#210648 = CARTESIAN_POINT('',(108.46165,-72.7131,1.585)); +#210649 = VECTOR('',#210650,1.); +#210650 = DIRECTION('',(1.,0.,0.)); +#210651 = ORIENTED_EDGE('',*,*,#210652,.T.); +#210652 = EDGE_CURVE('',#210645,#210653,#210655,.T.); +#210653 = VERTEX_POINT('',#210654); +#210654 = CARTESIAN_POINT('',(156.84165,-72.7731,1.585)); +#210655 = CIRCLE('',#210656,5.99993201626E-02); +#210656 = AXIS2_PLACEMENT_3D('',#210657,#210658,#210659); +#210657 = CARTESIAN_POINT('',(156.78165067984,-72.77309932015,1.585)); +#210658 = DIRECTION('',(0.,0.,-1.)); +#210659 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#210660 = ORIENTED_EDGE('',*,*,#210661,.T.); +#210661 = EDGE_CURVE('',#210653,#210662,#210664,.T.); +#210662 = VERTEX_POINT('',#210663); +#210663 = CARTESIAN_POINT('',(156.84165,-75.4331,1.585)); +#210664 = LINE('',#210665,#210666); +#210665 = CARTESIAN_POINT('',(156.84165,-72.7731,1.585)); +#210666 = VECTOR('',#210667,1.); +#210667 = DIRECTION('',(0.,-1.,0.)); +#210668 = ORIENTED_EDGE('',*,*,#210669,.T.); +#210669 = EDGE_CURVE('',#210662,#210670,#210672,.T.); +#210670 = VERTEX_POINT('',#210671); +#210671 = CARTESIAN_POINT('',(156.78165,-75.4931,1.585)); +#210672 = CIRCLE('',#210673,5.999932016253E-02); +#210673 = AXIS2_PLACEMENT_3D('',#210674,#210675,#210676); +#210674 = CARTESIAN_POINT('',(156.78165067984,-75.43310067984,1.585)); +#210675 = DIRECTION('',(0.,0.,-1.)); +#210676 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#210677 = ORIENTED_EDGE('',*,*,#210678,.T.); +#210678 = EDGE_CURVE('',#210670,#210679,#210681,.T.); +#210679 = VERTEX_POINT('',#210680); +#210680 = CARTESIAN_POINT('',(108.46165,-75.4931,1.585)); +#210681 = LINE('',#210682,#210683); +#210682 = CARTESIAN_POINT('',(156.78165,-75.4931,1.585)); +#210683 = VECTOR('',#210684,1.); +#210684 = DIRECTION('',(-1.,0.,0.)); +#210685 = ORIENTED_EDGE('',*,*,#210686,.T.); +#210686 = EDGE_CURVE('',#210679,#210687,#210689,.T.); +#210687 = VERTEX_POINT('',#210688); +#210688 = CARTESIAN_POINT('',(108.40165,-75.4331,1.585)); +#210689 = CIRCLE('',#210690,5.999932016258E-02); +#210690 = AXIS2_PLACEMENT_3D('',#210691,#210692,#210693); +#210691 = CARTESIAN_POINT('',(108.46164932015,-75.43310067984,1.585)); +#210692 = DIRECTION('',(0.,0.,-1.)); +#210693 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#210694 = ORIENTED_EDGE('',*,*,#210695,.T.); +#210695 = EDGE_CURVE('',#210687,#210634,#210696,.T.); +#210696 = LINE('',#210697,#210698); +#210697 = CARTESIAN_POINT('',(108.40165,-75.4331,1.585)); +#210698 = VECTOR('',#210699,1.); +#210699 = DIRECTION('',(0.,1.,0.)); +#210700 = FACE_BOUND('',#210701,.F.); +#210701 = EDGE_LOOP('',(#210702,#210712,#210720,#210728)); +#210702 = ORIENTED_EDGE('',*,*,#210703,.T.); +#210703 = EDGE_CURVE('',#210704,#210706,#210708,.T.); +#210704 = VERTEX_POINT('',#210705); +#210705 = CARTESIAN_POINT('',(156.72165,-75.3731,1.585)); +#210706 = VERTEX_POINT('',#210707); +#210707 = CARTESIAN_POINT('',(156.72165,-72.8331,1.585)); +#210708 = LINE('',#210709,#210710); +#210709 = CARTESIAN_POINT('',(156.72165,-75.3731,1.585)); +#210710 = VECTOR('',#210711,1.); +#210711 = DIRECTION('',(0.,1.,0.)); +#210712 = ORIENTED_EDGE('',*,*,#210713,.T.); +#210713 = EDGE_CURVE('',#210706,#210714,#210716,.T.); +#210714 = VERTEX_POINT('',#210715); +#210715 = CARTESIAN_POINT('',(108.52165,-72.8331,1.585)); +#210716 = LINE('',#210717,#210718); +#210717 = CARTESIAN_POINT('',(156.72165,-72.8331,1.585)); +#210718 = VECTOR('',#210719,1.); +#210719 = DIRECTION('',(-1.,0.,0.)); +#210720 = ORIENTED_EDGE('',*,*,#210721,.T.); +#210721 = EDGE_CURVE('',#210714,#210722,#210724,.T.); +#210722 = VERTEX_POINT('',#210723); +#210723 = CARTESIAN_POINT('',(108.52165,-75.3731,1.585)); +#210724 = LINE('',#210725,#210726); +#210725 = CARTESIAN_POINT('',(108.52165,-72.8331,1.585)); +#210726 = VECTOR('',#210727,1.); +#210727 = DIRECTION('',(0.,-1.,0.)); +#210728 = ORIENTED_EDGE('',*,*,#210729,.T.); +#210729 = EDGE_CURVE('',#210722,#210704,#210730,.T.); +#210730 = LINE('',#210731,#210732); +#210731 = CARTESIAN_POINT('',(108.52165,-75.3731,1.585)); +#210732 = VECTOR('',#210733,1.); +#210733 = DIRECTION('',(1.,0.,0.)); +#210734 = PLANE('',#210735); +#210735 = AXIS2_PLACEMENT_3D('',#210736,#210737,#210738); +#210736 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210737 = DIRECTION('',(0.,0.,1.)); +#210738 = DIRECTION('',(1.,0.,-0.)); +#210739 = SHELL_BASED_SURFACE_MODEL('',(#210740)); +#210740 = OPEN_SHELL('',(#210741)); +#210741 = ADVANCED_FACE('',(#210742),#210812,.T.); +#210742 = FACE_BOUND('',#210743,.F.); +#210743 = EDGE_LOOP('',(#210744,#210755,#210763,#210772,#210780,#210789, + #210797,#210806)); +#210744 = ORIENTED_EDGE('',*,*,#210745,.T.); +#210745 = EDGE_CURVE('',#210746,#210748,#210750,.T.); +#210746 = VERTEX_POINT('',#210747); +#210747 = CARTESIAN_POINT('',(100.92022,-75.145559,1.585)); +#210748 = VERTEX_POINT('',#210749); +#210749 = CARTESIAN_POINT('',(101.003556,-75.145559,1.585)); +#210750 = CIRCLE('',#210751,7.499882881843E-02); +#210751 = AXIS2_PLACEMENT_3D('',#210752,#210753,#210754); +#210752 = CARTESIAN_POINT('',(100.961888,-75.20791765697,1.585)); +#210753 = DIRECTION('',(0.,0.,-1.)); +#210754 = DIRECTION('',(-0.555582009165,0.831461743613,0.)); +#210755 = ORIENTED_EDGE('',*,*,#210756,.T.); +#210756 = EDGE_CURVE('',#210748,#210757,#210759,.T.); +#210757 = VERTEX_POINT('',#210758); +#210758 = CARTESIAN_POINT('',(101.071867,-75.21387,1.585)); +#210759 = LINE('',#210760,#210761); +#210760 = CARTESIAN_POINT('',(101.003556,-75.145559,1.585)); +#210761 = VECTOR('',#210762,1.); +#210762 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#210763 = ORIENTED_EDGE('',*,*,#210764,.T.); +#210764 = EDGE_CURVE('',#210757,#210765,#210767,.T.); +#210765 = VERTEX_POINT('',#210766); +#210766 = CARTESIAN_POINT('',(101.06254,-75.308571,1.585)); +#210767 = CIRCLE('',#210768,7.499999203861E-02); +#210768 = AXIS2_PLACEMENT_3D('',#210769,#210770,#210771); +#210769 = CARTESIAN_POINT('',(101.00950696407,-75.25553803,1.585)); +#210770 = DIRECTION('',(0.,0.,-1.)); +#210771 = DIRECTION('',(0.831467233969,0.555573792431,0.)); +#210772 = ORIENTED_EDGE('',*,*,#210773,.T.); +#210773 = EDGE_CURVE('',#210765,#210774,#210776,.T.); +#210774 = VERTEX_POINT('',#210775); +#210775 = CARTESIAN_POINT('',(101.003556,-75.365517,1.585)); +#210776 = LINE('',#210777,#210778); +#210777 = CARTESIAN_POINT('',(101.06254,-75.308571,1.585)); +#210778 = VECTOR('',#210779,1.); +#210779 = DIRECTION('',(-0.71942625942,-0.694568828308,0.)); +#210780 = ORIENTED_EDGE('',*,*,#210781,.T.); +#210781 = EDGE_CURVE('',#210774,#210782,#210784,.T.); +#210782 = VERTEX_POINT('',#210783); +#210783 = CARTESIAN_POINT('',(100.908855,-75.35619,1.585)); +#210784 = CIRCLE('',#210785,7.499999203859E-02); +#210785 = AXIS2_PLACEMENT_3D('',#210786,#210787,#210788); +#210786 = CARTESIAN_POINT('',(100.96188796999,-75.30315696407,1.585)); +#210787 = DIRECTION('',(-0.,0.,-1.)); +#210788 = DIRECTION('',(0.555573792431,-0.831467233969,-0.)); +#210789 = ORIENTED_EDGE('',*,*,#210790,.T.); +#210790 = EDGE_CURVE('',#210782,#210791,#210793,.T.); +#210791 = VERTEX_POINT('',#210792); +#210792 = CARTESIAN_POINT('',(100.851909,-75.297206,1.585)); +#210793 = LINE('',#210794,#210795); +#210794 = CARTESIAN_POINT('',(100.908855,-75.35619,1.585)); +#210795 = VECTOR('',#210796,1.); +#210796 = DIRECTION('',(-0.694568828308,0.71942625942,0.)); +#210797 = ORIENTED_EDGE('',*,*,#210798,.T.); +#210798 = EDGE_CURVE('',#210791,#210799,#210801,.T.); +#210799 = VERTEX_POINT('',#210800); +#210800 = CARTESIAN_POINT('',(100.861236,-75.202505,1.585)); +#210801 = CIRCLE('',#210802,7.499999203861E-02); +#210802 = AXIS2_PLACEMENT_3D('',#210803,#210804,#210805); +#210803 = CARTESIAN_POINT('',(100.91426903592,-75.25553796999,1.585)); +#210804 = DIRECTION('',(0.,0.,-1.)); +#210805 = DIRECTION('',(-0.831467233969,-0.555573792431,-0.)); +#210806 = ORIENTED_EDGE('',*,*,#210807,.T.); +#210807 = EDGE_CURVE('',#210799,#210746,#210808,.T.); +#210808 = LINE('',#210809,#210810); +#210809 = CARTESIAN_POINT('',(100.861236,-75.202505,1.585)); +#210810 = VECTOR('',#210811,1.); +#210811 = DIRECTION('',(0.71942625942,0.694568828308,0.)); +#210812 = PLANE('',#210813); +#210813 = AXIS2_PLACEMENT_3D('',#210814,#210815,#210816); +#210814 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210815 = DIRECTION('',(0.,0.,1.)); +#210816 = DIRECTION('',(1.,0.,-0.)); +#210817 = SHELL_BASED_SURFACE_MODEL('',(#210818)); +#210818 = OPEN_SHELL('',(#210819)); +#210819 = ADVANCED_FACE('',(#210820),#210881,.T.); +#210820 = FACE_BOUND('',#210821,.F.); +#210821 = EDGE_LOOP('',(#210822,#210833,#210841,#210850,#210858,#210867, + #210875)); +#210822 = ORIENTED_EDGE('',*,*,#210823,.T.); +#210823 = EDGE_CURVE('',#210824,#210826,#210828,.T.); +#210824 = VERTEX_POINT('',#210825); +#210825 = CARTESIAN_POINT('',(171.538335,-74.309042,1.585)); +#210826 = VERTEX_POINT('',#210827); +#210827 = CARTESIAN_POINT('',(171.661664,-74.350152,1.585)); +#210828 = CIRCLE('',#210829,6.500014296397E-02); +#210829 = AXIS2_PLACEMENT_3D('',#210830,#210831,#210832); +#210830 = CARTESIAN_POINT('',(171.59999940669,-74.32959727991,1.585)); +#210831 = DIRECTION('',(0.,0.,-1.)); +#210832 = DIRECTION('',(-0.948681093355,0.316234380027,0.)); +#210833 = ORIENTED_EDGE('',*,*,#210834,.T.); +#210834 = EDGE_CURVE('',#210826,#210835,#210837,.T.); +#210835 = VERTEX_POINT('',#210836); +#210836 = CARTESIAN_POINT('',(171.361664,-75.250152,1.585)); +#210837 = LINE('',#210838,#210839); +#210838 = CARTESIAN_POINT('',(171.661664,-74.350152,1.585)); +#210839 = VECTOR('',#210840,1.); +#210840 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#210841 = ORIENTED_EDGE('',*,*,#210842,.T.); +#210842 = EDGE_CURVE('',#210835,#210843,#210845,.T.); +#210843 = VERTEX_POINT('',#210844); +#210844 = CARTESIAN_POINT('',(171.238335,-75.250152,1.585)); +#210845 = CIRCLE('',#210846,6.500043802861E-02); +#210846 = AXIS2_PLACEMENT_3D('',#210847,#210848,#210849); +#210847 = CARTESIAN_POINT('',(171.2999995,-75.22959606694,1.585)); +#210848 = DIRECTION('',(-0.,0.,-1.)); +#210849 = DIRECTION('',(0.948678222335,-0.316242992755,-0.)); +#210850 = ORIENTED_EDGE('',*,*,#210851,.T.); +#210851 = EDGE_CURVE('',#210843,#210852,#210854,.T.); +#210852 = VERTEX_POINT('',#210853); +#210853 = CARTESIAN_POINT('',(170.938336,-74.350152,1.585)); +#210854 = LINE('',#210855,#210856); +#210855 = CARTESIAN_POINT('',(171.238335,-75.250152,1.585)); +#210856 = VECTOR('',#210857,1.); +#210857 = DIRECTION('',(-0.316226817333,0.948683614278,0.)); +#210858 = ORIENTED_EDGE('',*,*,#210859,.T.); +#210859 = EDGE_CURVE('',#210852,#210860,#210862,.T.); +#210860 = VERTEX_POINT('',#210861); +#210861 = CARTESIAN_POINT('',(171.061664,-74.309042,1.585)); +#210862 = CIRCLE('',#210863,6.499966862239E-02); +#210863 = AXIS2_PLACEMENT_3D('',#210864,#210865,#210866); +#210864 = CARTESIAN_POINT('',(171.00000004307,-74.32959712923,1.585)); +#210865 = DIRECTION('',(0.,0.,-1.)); +#210866 = DIRECTION('',(-0.948682422317,-0.316230393205,-0.)); +#210867 = ORIENTED_EDGE('',*,*,#210868,.T.); +#210868 = EDGE_CURVE('',#210860,#210869,#210871,.T.); +#210869 = VERTEX_POINT('',#210870); +#210870 = CARTESIAN_POINT('',(171.299999,-75.024049,1.585)); +#210871 = LINE('',#210872,#210873); +#210872 = CARTESIAN_POINT('',(171.061664,-74.309042,1.585)); +#210873 = VECTOR('',#210874,1.); +#210874 = DIRECTION('',(0.316226969926,-0.948683563414,0.)); +#210875 = ORIENTED_EDGE('',*,*,#210876,.T.); +#210876 = EDGE_CURVE('',#210869,#210824,#210877,.T.); +#210877 = LINE('',#210878,#210879); +#210878 = CARTESIAN_POINT('',(171.299999,-75.024049,1.585)); +#210879 = VECTOR('',#210880,1.); +#210880 = DIRECTION('',(0.316228164062,0.948683165369,0.)); +#210881 = PLANE('',#210882); +#210882 = AXIS2_PLACEMENT_3D('',#210883,#210884,#210885); +#210883 = CARTESIAN_POINT('',(0.,0.,1.585)); +#210884 = DIRECTION('',(0.,0.,1.)); +#210885 = DIRECTION('',(1.,0.,-0.)); +#210886 = SHELL_BASED_SURFACE_MODEL('',(#210887)); +#210887 = OPEN_SHELL('',(#210888)); +#210888 = ADVANCED_FACE('',(#210889),#211022,.T.); +#210889 = FACE_BOUND('',#210890,.F.); +#210890 = EDGE_LOOP('',(#210891,#210902,#210910,#210918,#210926,#210934, + #210943,#210951,#210960,#210968,#210976,#210984,#210992,#211000, + #211008,#211016)); +#210891 = ORIENTED_EDGE('',*,*,#210892,.T.); +#210892 = EDGE_CURVE('',#210893,#210895,#210897,.T.); +#210893 = VERTEX_POINT('',#210894); +#210894 = CARTESIAN_POINT('',(86.226217,-72.860139,1.585)); +#210895 = VERTEX_POINT('',#210896); +#210896 = CARTESIAN_POINT('',(86.34165,-72.8831,1.585)); +#210897 = CIRCLE('',#210898,6.000007318647E-02); +#210898 = AXIS2_PLACEMENT_3D('',#210899,#210900,#210901); +#210899 = CARTESIAN_POINT('',(86.281649926814,-72.88309982331,1.585)); +#210900 = DIRECTION('',(0.,0.,-1.)); +#210901 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#210902 = ORIENTED_EDGE('',*,*,#210903,.T.); +#210903 = EDGE_CURVE('',#210895,#210904,#210906,.T.); +#210904 = VERTEX_POINT('',#210905); +#210905 = CARTESIAN_POINT('',(86.34165,-74.14381,1.585)); +#210906 = LINE('',#210907,#210908); +#210907 = CARTESIAN_POINT('',(86.34165,-72.8831,1.585)); +#210908 = VECTOR('',#210909,1.); +#210909 = DIRECTION('',(0.,-1.,0.)); +#210910 = ORIENTED_EDGE('',*,*,#210911,.T.); +#210911 = EDGE_CURVE('',#210904,#210912,#210914,.T.); +#210912 = VERTEX_POINT('',#210913); +#210913 = CARTESIAN_POINT('',(87.37094,-75.1731,1.585)); +#210914 = LINE('',#210915,#210916); +#210915 = CARTESIAN_POINT('',(86.34165,-74.14381,1.585)); +#210916 = VECTOR('',#210917,1.); +#210917 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#210918 = ORIENTED_EDGE('',*,*,#210919,.T.); +#210919 = EDGE_CURVE('',#210912,#210920,#210922,.T.); +#210920 = VERTEX_POINT('',#210921); +#210921 = CARTESIAN_POINT('',(93.04165,-75.1731,1.585)); +#210922 = LINE('',#210923,#210924); +#210923 = CARTESIAN_POINT('',(87.37094,-75.1731,1.585)); +#210924 = VECTOR('',#210925,1.); +#210925 = DIRECTION('',(1.,0.,0.)); +#210926 = ORIENTED_EDGE('',*,*,#210927,.T.); +#210927 = EDGE_CURVE('',#210920,#210928,#210930,.T.); +#210928 = VERTEX_POINT('',#210929); +#210929 = CARTESIAN_POINT('',(93.04165,-72.8831,1.585)); +#210930 = LINE('',#210931,#210932); +#210931 = CARTESIAN_POINT('',(93.04165,-75.1731,1.585)); +#210932 = VECTOR('',#210933,1.); +#210933 = DIRECTION('',(0.,1.,0.)); +#210934 = ORIENTED_EDGE('',*,*,#210935,.T.); +#210935 = EDGE_CURVE('',#210928,#210936,#210938,.T.); +#210936 = VERTEX_POINT('',#210937); +#210937 = CARTESIAN_POINT('',(93.16165,-72.8831,1.585)); +#210938 = CIRCLE('',#210939,6.000000000042E-02); +#210939 = AXIS2_PLACEMENT_3D('',#210940,#210941,#210942); +#210940 = CARTESIAN_POINT('',(93.10165,-72.88309977441,1.585)); +#210941 = DIRECTION('',(0.,0.,-1.)); +#210942 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#210943 = ORIENTED_EDGE('',*,*,#210944,.T.); +#210944 = EDGE_CURVE('',#210936,#210945,#210947,.T.); +#210945 = VERTEX_POINT('',#210946); +#210946 = CARTESIAN_POINT('',(93.16165,-75.2331,1.585)); +#210947 = LINE('',#210948,#210949); +#210948 = CARTESIAN_POINT('',(93.16165,-72.8831,1.585)); +#210949 = VECTOR('',#210950,1.); +#210950 = DIRECTION('',(0.,-1.,0.)); +#210951 = ORIENTED_EDGE('',*,*,#210952,.T.); +#210952 = EDGE_CURVE('',#210945,#210953,#210955,.T.); +#210953 = VERTEX_POINT('',#210954); +#210954 = CARTESIAN_POINT('',(93.10165,-75.2931,1.585)); +#210955 = CIRCLE('',#210956,5.999932016258E-02); +#210956 = AXIS2_PLACEMENT_3D('',#210957,#210958,#210959); +#210957 = CARTESIAN_POINT('',(93.101650679841,-75.23310067984,1.585)); +#210958 = DIRECTION('',(0.,0.,-1.)); +#210959 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#210960 = ORIENTED_EDGE('',*,*,#210961,.T.); +#210961 = EDGE_CURVE('',#210953,#210962,#210964,.T.); +#210962 = VERTEX_POINT('',#210963); +#210963 = CARTESIAN_POINT('',(87.346087,-75.2931,1.585)); +#210964 = LINE('',#210965,#210966); +#210965 = CARTESIAN_POINT('',(93.10165,-75.2931,1.585)); +#210966 = VECTOR('',#210967,1.); +#210967 = DIRECTION('',(-1.,0.,0.)); +#210968 = ORIENTED_EDGE('',*,*,#210969,.T.); +#210969 = EDGE_CURVE('',#210962,#210970,#210972,.T.); +#210970 = VERTEX_POINT('',#210971); +#210971 = CARTESIAN_POINT('',(87.323126,-75.288533,1.585)); +#210972 = LINE('',#210973,#210974); +#210973 = CARTESIAN_POINT('',(87.346087,-75.2931,1.585)); +#210974 = VECTOR('',#210975,1.); +#210975 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#210976 = ORIENTED_EDGE('',*,*,#210977,.T.); +#210977 = EDGE_CURVE('',#210970,#210978,#210980,.T.); +#210978 = VERTEX_POINT('',#210979); +#210979 = CARTESIAN_POINT('',(87.30366,-75.275526,1.585)); +#210980 = LINE('',#210981,#210982); +#210981 = CARTESIAN_POINT('',(87.323126,-75.288533,1.585)); +#210982 = VECTOR('',#210983,1.); +#210983 = DIRECTION('',(-0.831464982668,0.555577161695,0.)); +#210984 = ORIENTED_EDGE('',*,*,#210985,.T.); +#210985 = EDGE_CURVE('',#210978,#210986,#210988,.T.); +#210986 = VERTEX_POINT('',#210987); +#210987 = CARTESIAN_POINT('',(86.239224,-74.211089,1.585)); +#210988 = LINE('',#210989,#210990); +#210989 = CARTESIAN_POINT('',(87.30366,-75.275526,1.585)); +#210990 = VECTOR('',#210991,1.); +#210991 = DIRECTION('',(-0.707106449036,0.707107113337,0.)); +#210992 = ORIENTED_EDGE('',*,*,#210993,.T.); +#210993 = EDGE_CURVE('',#210986,#210994,#210996,.T.); +#210994 = VERTEX_POINT('',#210995); +#210995 = CARTESIAN_POINT('',(86.226217,-74.191624,1.585)); +#210996 = LINE('',#210997,#210998); +#210997 = CARTESIAN_POINT('',(86.239224,-74.211089,1.585)); +#210998 = VECTOR('',#210999,1.); +#210999 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#211000 = ORIENTED_EDGE('',*,*,#211001,.T.); +#211001 = EDGE_CURVE('',#210994,#211002,#211004,.T.); +#211002 = VERTEX_POINT('',#211003); +#211003 = CARTESIAN_POINT('',(86.22165,-74.168663,1.585)); +#211004 = LINE('',#211005,#211006); +#211005 = CARTESIAN_POINT('',(86.226217,-74.191624,1.585)); +#211006 = VECTOR('',#211007,1.); +#211007 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#211008 = ORIENTED_EDGE('',*,*,#211009,.T.); +#211009 = EDGE_CURVE('',#211002,#211010,#211012,.T.); +#211010 = VERTEX_POINT('',#211011); +#211011 = CARTESIAN_POINT('',(86.22165,-72.8831,1.585)); +#211012 = LINE('',#211013,#211014); +#211013 = CARTESIAN_POINT('',(86.22165,-74.168663,1.585)); +#211014 = VECTOR('',#211015,1.); +#211015 = DIRECTION('',(0.,1.,0.)); +#211016 = ORIENTED_EDGE('',*,*,#211017,.T.); +#211017 = EDGE_CURVE('',#211010,#210893,#211018,.T.); +#211018 = LINE('',#211019,#211020); +#211019 = CARTESIAN_POINT('',(86.22165,-72.8831,1.585)); +#211020 = VECTOR('',#211021,1.); +#211021 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#211022 = PLANE('',#211023); +#211023 = AXIS2_PLACEMENT_3D('',#211024,#211025,#211026); +#211024 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211025 = DIRECTION('',(0.,0.,1.)); +#211026 = DIRECTION('',(1.,0.,-0.)); +#211027 = SHELL_BASED_SURFACE_MODEL('',(#211028)); +#211028 = OPEN_SHELL('',(#211029)); +#211029 = ADVANCED_FACE('',(#211030),#211224,.T.); +#211030 = FACE_BOUND('',#211031,.F.); +#211031 = EDGE_LOOP('',(#211032,#211043,#211051,#211059,#211067,#211076, + #211084,#211093,#211101,#211110,#211118,#211126,#211134,#211143, + #211151,#211160,#211168,#211177,#211185,#211193,#211201,#211210, + #211218)); +#211032 = ORIENTED_EDGE('',*,*,#211033,.T.); +#211033 = EDGE_CURVE('',#211034,#211036,#211038,.T.); +#211034 = VERTEX_POINT('',#211035); +#211035 = CARTESIAN_POINT('',(170.185714,-74.394597,1.585)); +#211036 = VERTEX_POINT('',#211037); +#211037 = CARTESIAN_POINT('',(170.185714,-74.264597,1.585)); +#211038 = CIRCLE('',#211039,6.500000000092E-02); +#211039 = AXIS2_PLACEMENT_3D('',#211040,#211041,#211042); +#211040 = CARTESIAN_POINT('',(170.18571434486,-74.329597,1.585)); +#211041 = DIRECTION('',(0.,0.,-1.)); +#211042 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#211043 = ORIENTED_EDGE('',*,*,#211044,.T.); +#211044 = EDGE_CURVE('',#211036,#211045,#211047,.T.); +#211045 = VERTEX_POINT('',#211046); +#211046 = CARTESIAN_POINT('',(170.742857,-74.264597,1.585)); +#211047 = LINE('',#211048,#211049); +#211048 = CARTESIAN_POINT('',(170.185714,-74.264597,1.585)); +#211049 = VECTOR('',#211050,1.); +#211050 = DIRECTION('',(1.,0.,0.)); +#211051 = ORIENTED_EDGE('',*,*,#211052,.T.); +#211052 = EDGE_CURVE('',#211045,#211053,#211055,.T.); +#211053 = VERTEX_POINT('',#211054); +#211054 = CARTESIAN_POINT('',(170.760984,-74.268202,1.585)); +#211055 = LINE('',#211056,#211057); +#211056 = CARTESIAN_POINT('',(170.742857,-74.264597,1.585)); +#211057 = VECTOR('',#211058,1.); +#211058 = DIRECTION('',(0.980792366126,-0.195054696303,0.)); +#211059 = ORIENTED_EDGE('',*,*,#211060,.T.); +#211060 = EDGE_CURVE('',#211053,#211061,#211063,.T.); +#211061 = VERTEX_POINT('',#211062); +#211062 = CARTESIAN_POINT('',(170.767731,-74.269545,1.585)); +#211063 = LINE('',#211064,#211065); +#211064 = CARTESIAN_POINT('',(170.760984,-74.268202,1.585)); +#211065 = VECTOR('',#211066,1.); +#211066 = DIRECTION('',(0.980759175067,-0.195221516542,0.)); +#211067 = ORIENTED_EDGE('',*,*,#211068,.T.); +#211068 = EDGE_CURVE('',#211061,#211069,#211071,.T.); +#211069 = VERTEX_POINT('',#211070); +#211070 = CARTESIAN_POINT('',(170.791775,-74.372399,1.585)); +#211071 = CIRCLE('',#211072,6.499987492257E-02); +#211072 = AXIS2_PLACEMENT_3D('',#211073,#211074,#211075); +#211073 = CARTESIAN_POINT('',(170.74285685187,-74.32959714812,1.585)); +#211074 = DIRECTION('',(0.,0.,-1.)); +#211075 = DIRECTION('',(0.382679938354,0.92388097977,0.)); +#211076 = ORIENTED_EDGE('',*,*,#211077,.T.); +#211077 = EDGE_CURVE('',#211069,#211078,#211080,.T.); +#211078 = VERTEX_POINT('',#211079); +#211079 = CARTESIAN_POINT('',(170.586084,-74.610369,1.585)); +#211080 = LINE('',#211081,#211082); +#211081 = CARTESIAN_POINT('',(170.791775,-74.372399,1.585)); +#211082 = VECTOR('',#211083,1.); +#211083 = DIRECTION('',(-0.653932030599,-0.756553302389,0.)); +#211084 = ORIENTED_EDGE('',*,*,#211085,.T.); +#211085 = EDGE_CURVE('',#211078,#211086,#211088,.T.); +#211086 = VERTEX_POINT('',#211087); +#211087 = CARTESIAN_POINT('',(170.804941,-74.829225,1.585)); +#211088 = CIRCLE('',#211089,0.308107260308); +#211089 = AXIS2_PLACEMENT_3D('',#211090,#211091,#211092); +#211090 = CARTESIAN_POINT('',(170.50712370557,-74.90818665521,1.585)); +#211091 = DIRECTION('',(0.,0.,-1.)); +#211092 = DIRECTION('',(0.256275344983,0.966603821405,0.)); +#211093 = ORIENTED_EDGE('',*,*,#211094,.T.); +#211094 = EDGE_CURVE('',#211086,#211095,#211097,.T.); +#211095 = VERTEX_POINT('',#211096); +#211096 = CARTESIAN_POINT('',(170.804941,-75.072824,1.585)); +#211097 = LINE('',#211098,#211099); +#211098 = CARTESIAN_POINT('',(170.804941,-74.829225,1.585)); +#211099 = VECTOR('',#211100,1.); +#211100 = DIRECTION('',(0.,-1.,0.)); +#211101 = ORIENTED_EDGE('',*,*,#211102,.T.); +#211102 = EDGE_CURVE('',#211095,#211103,#211105,.T.); +#211103 = VERTEX_POINT('',#211104); +#211104 = CARTESIAN_POINT('',(170.586084,-75.291681,1.585)); +#211105 = CIRCLE('',#211106,0.308111908981); +#211106 = AXIS2_PLACEMENT_3D('',#211107,#211108,#211109); +#211107 = CARTESIAN_POINT('',(170.50711961898,-74.99385961898,1.585)); +#211108 = DIRECTION('',(0.,0.,-1.)); +#211109 = DIRECTION('',(0.966601330004,-0.256284741712,0.)); +#211110 = ORIENTED_EDGE('',*,*,#211111,.T.); +#211111 = EDGE_CURVE('',#211103,#211112,#211114,.T.); +#211112 = VERTEX_POINT('',#211113); +#211113 = CARTESIAN_POINT('',(170.299628,-75.291681,1.585)); +#211114 = LINE('',#211115,#211116); +#211115 = CARTESIAN_POINT('',(170.586084,-75.291681,1.585)); +#211116 = VECTOR('',#211117,1.); +#211117 = DIRECTION('',(-1.,0.,0.)); +#211118 = ORIENTED_EDGE('',*,*,#211119,.T.); +#211119 = EDGE_CURVE('',#211112,#211120,#211122,.T.); +#211120 = VERTEX_POINT('',#211121); +#211121 = CARTESIAN_POINT('',(170.191273,-75.238491,1.585)); +#211122 = LINE('',#211123,#211124); +#211123 = CARTESIAN_POINT('',(170.299628,-75.291681,1.585)); +#211124 = VECTOR('',#211125,1.); +#211125 = DIRECTION('',(-0.897675654444,0.440656804576,0.)); +#211126 = ORIENTED_EDGE('',*,*,#211127,.T.); +#211127 = EDGE_CURVE('',#211120,#211128,#211130,.T.); +#211128 = VERTEX_POINT('',#211129); +#211129 = CARTESIAN_POINT('',(170.139752,-75.189843,1.585)); +#211130 = LINE('',#211131,#211132); +#211131 = CARTESIAN_POINT('',(170.191273,-75.238491,1.585)); +#211132 = VECTOR('',#211133,1.); +#211133 = DIRECTION('',(-0.727088683259,0.686543550459,0.)); +#211134 = ORIENTED_EDGE('',*,*,#211135,.T.); +#211135 = EDGE_CURVE('',#211128,#211136,#211138,.T.); +#211136 = VERTEX_POINT('',#211137); +#211137 = CARTESIAN_POINT('',(170.231676,-75.097921,1.585)); +#211138 = CIRCLE('',#211139,6.499937665137E-02); +#211139 = AXIS2_PLACEMENT_3D('',#211140,#211141,#211142); +#211140 = CARTESIAN_POINT('',(170.18571418097,-75.14388218097,1.585)); +#211141 = DIRECTION('',(0.,0.,-1.)); +#211142 = DIRECTION('',(-0.707117257764,-0.707096304454,-0.)); +#211143 = ORIENTED_EDGE('',*,*,#211144,.T.); +#211144 = EDGE_CURVE('',#211136,#211145,#211147,.T.); +#211145 = VERTEX_POINT('',#211146); +#211146 = CARTESIAN_POINT('',(170.267074,-75.133319,1.585)); +#211147 = LINE('',#211148,#211149); +#211148 = CARTESIAN_POINT('',(170.231676,-75.097921,1.585)); +#211149 = VECTOR('',#211150,1.); +#211150 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#211151 = ORIENTED_EDGE('',*,*,#211152,.T.); +#211152 = EDGE_CURVE('',#211145,#211153,#211155,.T.); +#211153 = VERTEX_POINT('',#211154); +#211154 = CARTESIAN_POINT('',(170.618641,-75.133318,1.585)); +#211155 = CIRCLE('',#211156,0.325009177747); +#211156 = AXIS2_PLACEMENT_3D('',#211157,#211158,#211159); +#211157 = CARTESIAN_POINT('',(170.44285672242,-74.85994855515,1.585)); +#211158 = DIRECTION('',(0.,0.,1.)); +#211159 = DIRECTION('',(-0.540854641838,-0.841116077841,0.)); +#211160 = ORIENTED_EDGE('',*,*,#211161,.T.); +#211161 = EDGE_CURVE('',#211153,#211162,#211164,.T.); +#211162 = VERTEX_POINT('',#211163); +#211163 = CARTESIAN_POINT('',(170.646578,-75.105379,1.585)); +#211164 = LINE('',#211165,#211166); +#211165 = CARTESIAN_POINT('',(170.618641,-75.133318,1.585)); +#211166 = VECTOR('',#211167,1.); +#211167 = DIRECTION('',(0.707081470877,0.70713209059,0.)); +#211168 = ORIENTED_EDGE('',*,*,#211169,.T.); +#211169 = EDGE_CURVE('',#211162,#211170,#211172,.T.); +#211170 = VERTEX_POINT('',#211171); +#211171 = CARTESIAN_POINT('',(170.646579,-74.796671,1.585)); +#211172 = CIRCLE('',#211173,0.277413880171); +#211173 = AXIS2_PLACEMENT_3D('',#211174,#211175,#211176); +#211174 = CARTESIAN_POINT('',(170.41607187624,-74.95102425331,1.585)); +#211175 = DIRECTION('',(0.,-0.,1.)); +#211176 = DIRECTION('',(0.830910564434,-0.556405997373,-0.)); +#211177 = ORIENTED_EDGE('',*,*,#211178,.T.); +#211178 = EDGE_CURVE('',#211170,#211179,#211181,.T.); +#211179 = VERTEX_POINT('',#211180); +#211180 = CARTESIAN_POINT('',(170.61864,-74.768732,1.585)); +#211181 = LINE('',#211182,#211183); +#211182 = CARTESIAN_POINT('',(170.646579,-74.796671,1.585)); +#211183 = VECTOR('',#211184,1.); +#211184 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211185 = ORIENTED_EDGE('',*,*,#211186,.T.); +#211186 = EDGE_CURVE('',#211179,#211187,#211189,.T.); +#211187 = VERTEX_POINT('',#211188); +#211188 = CARTESIAN_POINT('',(170.556083,-74.737454,1.585)); +#211189 = LINE('',#211190,#211191); +#211190 = CARTESIAN_POINT('',(170.61864,-74.768732,1.585)); +#211191 = VECTOR('',#211192,1.); +#211192 = DIRECTION('',(-0.89443005055,0.447207876354,0.)); +#211193 = ORIENTED_EDGE('',*,*,#211194,.T.); +#211194 = EDGE_CURVE('',#211187,#211195,#211197,.T.); +#211195 = VERTEX_POINT('',#211196); +#211196 = CARTESIAN_POINT('',(170.442857,-74.737454,1.585)); +#211197 = LINE('',#211198,#211199); +#211198 = CARTESIAN_POINT('',(170.556083,-74.737454,1.585)); +#211199 = VECTOR('',#211200,1.); +#211200 = DIRECTION('',(-1.,0.,0.)); +#211201 = ORIENTED_EDGE('',*,*,#211202,.T.); +#211202 = EDGE_CURVE('',#211195,#211203,#211205,.T.); +#211203 = VERTEX_POINT('',#211204); +#211204 = CARTESIAN_POINT('',(170.39394,-74.629651,1.585)); +#211205 = CIRCLE('',#211206,6.500002288385E-02); +#211206 = AXIS2_PLACEMENT_3D('',#211207,#211208,#211209); +#211207 = CARTESIAN_POINT('',(170.44285736015,-74.67245397711,1.585)); +#211208 = DIRECTION('',(0.,0.,-1.)); +#211209 = DIRECTION('',(-5.54088725998E-06,-0.999999999985,-0.)); +#211210 = ORIENTED_EDGE('',*,*,#211211,.T.); +#211211 = EDGE_CURVE('',#211203,#211212,#211214,.T.); +#211212 = VERTEX_POINT('',#211213); +#211213 = CARTESIAN_POINT('',(170.599612,-74.394597,1.585)); +#211214 = LINE('',#211215,#211216); +#211215 = CARTESIAN_POINT('',(170.39394,-74.629651,1.585)); +#211216 = VECTOR('',#211217,1.); +#211217 = DIRECTION('',(0.658504154528,0.75257709138,0.)); +#211218 = ORIENTED_EDGE('',*,*,#211219,.T.); +#211219 = EDGE_CURVE('',#211212,#211034,#211220,.T.); +#211220 = LINE('',#211221,#211222); +#211221 = CARTESIAN_POINT('',(170.599612,-74.394597,1.585)); +#211222 = VECTOR('',#211223,1.); +#211223 = DIRECTION('',(-1.,0.,0.)); +#211224 = PLANE('',#211225); +#211225 = AXIS2_PLACEMENT_3D('',#211226,#211227,#211228); +#211226 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211227 = DIRECTION('',(0.,0.,1.)); +#211228 = DIRECTION('',(1.,0.,-0.)); +#211229 = SHELL_BASED_SURFACE_MODEL('',(#211230)); +#211230 = OPEN_SHELL('',(#211231)); +#211231 = ADVANCED_FACE('',(#211232),#211426,.T.); +#211232 = FACE_BOUND('',#211233,.F.); +#211233 = EDGE_LOOP('',(#211234,#211245,#211253,#211261,#211269,#211278, + #211286,#211295,#211303,#211312,#211320,#211328,#211336,#211345, + #211353,#211362,#211370,#211379,#211387,#211395,#211403,#211412, + #211420)); +#211234 = ORIENTED_EDGE('',*,*,#211235,.T.); +#211235 = EDGE_CURVE('',#211236,#211238,#211240,.T.); +#211236 = VERTEX_POINT('',#211237); +#211237 = CARTESIAN_POINT('',(171.814286,-74.394597,1.585)); +#211238 = VERTEX_POINT('',#211239); +#211239 = CARTESIAN_POINT('',(171.814286,-74.264597,1.585)); +#211240 = CIRCLE('',#211241,6.500000000093E-02); +#211241 = AXIS2_PLACEMENT_3D('',#211242,#211243,#211244); +#211242 = CARTESIAN_POINT('',(171.81428634486,-74.329597,1.585)); +#211243 = DIRECTION('',(0.,0.,-1.)); +#211244 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#211245 = ORIENTED_EDGE('',*,*,#211246,.T.); +#211246 = EDGE_CURVE('',#211238,#211247,#211249,.T.); +#211247 = VERTEX_POINT('',#211248); +#211248 = CARTESIAN_POINT('',(172.371429,-74.264597,1.585)); +#211249 = LINE('',#211250,#211251); +#211250 = CARTESIAN_POINT('',(171.814286,-74.264597,1.585)); +#211251 = VECTOR('',#211252,1.); +#211252 = DIRECTION('',(1.,0.,0.)); +#211253 = ORIENTED_EDGE('',*,*,#211254,.T.); +#211254 = EDGE_CURVE('',#211247,#211255,#211257,.T.); +#211255 = VERTEX_POINT('',#211256); +#211256 = CARTESIAN_POINT('',(172.389556,-74.268202,1.585)); +#211257 = LINE('',#211258,#211259); +#211258 = CARTESIAN_POINT('',(172.371429,-74.264597,1.585)); +#211259 = VECTOR('',#211260,1.); +#211260 = DIRECTION('',(0.980792366125,-0.195054696303,0.)); +#211261 = ORIENTED_EDGE('',*,*,#211262,.T.); +#211262 = EDGE_CURVE('',#211255,#211263,#211265,.T.); +#211263 = VERTEX_POINT('',#211264); +#211264 = CARTESIAN_POINT('',(172.396303,-74.269545,1.585)); +#211265 = LINE('',#211266,#211267); +#211266 = CARTESIAN_POINT('',(172.389556,-74.268202,1.585)); +#211267 = VECTOR('',#211268,1.); +#211268 = DIRECTION('',(0.980759175067,-0.195221516542,0.)); +#211269 = ORIENTED_EDGE('',*,*,#211270,.T.); +#211270 = EDGE_CURVE('',#211263,#211271,#211273,.T.); +#211271 = VERTEX_POINT('',#211272); +#211272 = CARTESIAN_POINT('',(172.420347,-74.372399,1.585)); +#211273 = CIRCLE('',#211274,6.499987492259E-02); +#211274 = AXIS2_PLACEMENT_3D('',#211275,#211276,#211277); +#211275 = CARTESIAN_POINT('',(172.37142885187,-74.32959714812,1.585)); +#211276 = DIRECTION('',(0.,0.,-1.)); +#211277 = DIRECTION('',(0.382679938354,0.92388097977,0.)); +#211278 = ORIENTED_EDGE('',*,*,#211279,.T.); +#211279 = EDGE_CURVE('',#211271,#211280,#211282,.T.); +#211280 = VERTEX_POINT('',#211281); +#211281 = CARTESIAN_POINT('',(172.214656,-74.610369,1.585)); +#211282 = LINE('',#211283,#211284); +#211283 = CARTESIAN_POINT('',(172.420347,-74.372399,1.585)); +#211284 = VECTOR('',#211285,1.); +#211285 = DIRECTION('',(-0.653932030599,-0.756553302389,0.)); +#211286 = ORIENTED_EDGE('',*,*,#211287,.T.); +#211287 = EDGE_CURVE('',#211280,#211288,#211290,.T.); +#211288 = VERTEX_POINT('',#211289); +#211289 = CARTESIAN_POINT('',(172.433513,-74.829225,1.585)); +#211290 = CIRCLE('',#211291,0.308107260307); +#211291 = AXIS2_PLACEMENT_3D('',#211292,#211293,#211294); +#211292 = CARTESIAN_POINT('',(172.13569570557,-74.90818665521,1.585)); +#211293 = DIRECTION('',(0.,0.,-1.)); +#211294 = DIRECTION('',(0.256275344982,0.966603821405,0.)); +#211295 = ORIENTED_EDGE('',*,*,#211296,.T.); +#211296 = EDGE_CURVE('',#211288,#211297,#211299,.T.); +#211297 = VERTEX_POINT('',#211298); +#211298 = CARTESIAN_POINT('',(172.433513,-75.072824,1.585)); +#211299 = LINE('',#211300,#211301); +#211300 = CARTESIAN_POINT('',(172.433513,-74.829225,1.585)); +#211301 = VECTOR('',#211302,1.); +#211302 = DIRECTION('',(0.,-1.,0.)); +#211303 = ORIENTED_EDGE('',*,*,#211304,.T.); +#211304 = EDGE_CURVE('',#211297,#211305,#211307,.T.); +#211305 = VERTEX_POINT('',#211306); +#211306 = CARTESIAN_POINT('',(172.214656,-75.291681,1.585)); +#211307 = CIRCLE('',#211308,0.308111908981); +#211308 = AXIS2_PLACEMENT_3D('',#211309,#211310,#211311); +#211309 = CARTESIAN_POINT('',(172.13569161898,-74.99385961898,1.585)); +#211310 = DIRECTION('',(0.,0.,-1.)); +#211311 = DIRECTION('',(0.966601330004,-0.256284741711,0.)); +#211312 = ORIENTED_EDGE('',*,*,#211313,.T.); +#211313 = EDGE_CURVE('',#211305,#211314,#211316,.T.); +#211314 = VERTEX_POINT('',#211315); +#211315 = CARTESIAN_POINT('',(171.9282,-75.291681,1.585)); +#211316 = LINE('',#211317,#211318); +#211317 = CARTESIAN_POINT('',(172.214656,-75.291681,1.585)); +#211318 = VECTOR('',#211319,1.); +#211319 = DIRECTION('',(-1.,0.,0.)); +#211320 = ORIENTED_EDGE('',*,*,#211321,.T.); +#211321 = EDGE_CURVE('',#211314,#211322,#211324,.T.); +#211322 = VERTEX_POINT('',#211323); +#211323 = CARTESIAN_POINT('',(171.819845,-75.238491,1.585)); +#211324 = LINE('',#211325,#211326); +#211325 = CARTESIAN_POINT('',(171.9282,-75.291681,1.585)); +#211326 = VECTOR('',#211327,1.); +#211327 = DIRECTION('',(-0.897675654444,0.440656804576,0.)); +#211328 = ORIENTED_EDGE('',*,*,#211329,.T.); +#211329 = EDGE_CURVE('',#211322,#211330,#211332,.T.); +#211330 = VERTEX_POINT('',#211331); +#211331 = CARTESIAN_POINT('',(171.768324,-75.189843,1.585)); +#211332 = LINE('',#211333,#211334); +#211333 = CARTESIAN_POINT('',(171.819845,-75.238491,1.585)); +#211334 = VECTOR('',#211335,1.); +#211335 = DIRECTION('',(-0.727088683259,0.686543550459,0.)); +#211336 = ORIENTED_EDGE('',*,*,#211337,.T.); +#211337 = EDGE_CURVE('',#211330,#211338,#211340,.T.); +#211338 = VERTEX_POINT('',#211339); +#211339 = CARTESIAN_POINT('',(171.860248,-75.097921,1.585)); +#211340 = CIRCLE('',#211341,6.499937665136E-02); +#211341 = AXIS2_PLACEMENT_3D('',#211342,#211343,#211344); +#211342 = CARTESIAN_POINT('',(171.81428618097,-75.14388218097,1.585)); +#211343 = DIRECTION('',(0.,0.,-1.)); +#211344 = DIRECTION('',(-0.707117257763,-0.707096304454,-0.)); +#211345 = ORIENTED_EDGE('',*,*,#211346,.T.); +#211346 = EDGE_CURVE('',#211338,#211347,#211349,.T.); +#211347 = VERTEX_POINT('',#211348); +#211348 = CARTESIAN_POINT('',(171.895646,-75.133319,1.585)); +#211349 = LINE('',#211350,#211351); +#211350 = CARTESIAN_POINT('',(171.860248,-75.097921,1.585)); +#211351 = VECTOR('',#211352,1.); +#211352 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#211353 = ORIENTED_EDGE('',*,*,#211354,.T.); +#211354 = EDGE_CURVE('',#211347,#211355,#211357,.T.); +#211355 = VERTEX_POINT('',#211356); +#211356 = CARTESIAN_POINT('',(172.247213,-75.133318,1.585)); +#211357 = CIRCLE('',#211358,0.325009177747); +#211358 = AXIS2_PLACEMENT_3D('',#211359,#211360,#211361); +#211359 = CARTESIAN_POINT('',(172.07142872242,-74.85994855515,1.585)); +#211360 = DIRECTION('',(0.,0.,1.)); +#211361 = DIRECTION('',(-0.540854641838,-0.841116077841,0.)); +#211362 = ORIENTED_EDGE('',*,*,#211363,.T.); +#211363 = EDGE_CURVE('',#211355,#211364,#211366,.T.); +#211364 = VERTEX_POINT('',#211365); +#211365 = CARTESIAN_POINT('',(172.27515,-75.105379,1.585)); +#211366 = LINE('',#211367,#211368); +#211367 = CARTESIAN_POINT('',(172.247213,-75.133318,1.585)); +#211368 = VECTOR('',#211369,1.); +#211369 = DIRECTION('',(0.707081470877,0.70713209059,0.)); +#211370 = ORIENTED_EDGE('',*,*,#211371,.T.); +#211371 = EDGE_CURVE('',#211364,#211372,#211374,.T.); +#211372 = VERTEX_POINT('',#211373); +#211373 = CARTESIAN_POINT('',(172.275151,-74.796671,1.585)); +#211374 = CIRCLE('',#211375,0.277413880171); +#211375 = AXIS2_PLACEMENT_3D('',#211376,#211377,#211378); +#211376 = CARTESIAN_POINT('',(172.04464387624,-74.95102425331,1.585)); +#211377 = DIRECTION('',(0.,-0.,1.)); +#211378 = DIRECTION('',(0.830910564433,-0.556405997373,-0.)); +#211379 = ORIENTED_EDGE('',*,*,#211380,.T.); +#211380 = EDGE_CURVE('',#211372,#211381,#211383,.T.); +#211381 = VERTEX_POINT('',#211382); +#211382 = CARTESIAN_POINT('',(172.247212,-74.768732,1.585)); +#211383 = LINE('',#211384,#211385); +#211384 = CARTESIAN_POINT('',(172.275151,-74.796671,1.585)); +#211385 = VECTOR('',#211386,1.); +#211386 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211387 = ORIENTED_EDGE('',*,*,#211388,.T.); +#211388 = EDGE_CURVE('',#211381,#211389,#211391,.T.); +#211389 = VERTEX_POINT('',#211390); +#211390 = CARTESIAN_POINT('',(172.184655,-74.737454,1.585)); +#211391 = LINE('',#211392,#211393); +#211392 = CARTESIAN_POINT('',(172.247212,-74.768732,1.585)); +#211393 = VECTOR('',#211394,1.); +#211394 = DIRECTION('',(-0.89443005055,0.447207876354,0.)); +#211395 = ORIENTED_EDGE('',*,*,#211396,.T.); +#211396 = EDGE_CURVE('',#211389,#211397,#211399,.T.); +#211397 = VERTEX_POINT('',#211398); +#211398 = CARTESIAN_POINT('',(172.071429,-74.737454,1.585)); +#211399 = LINE('',#211400,#211401); +#211400 = CARTESIAN_POINT('',(172.184655,-74.737454,1.585)); +#211401 = VECTOR('',#211402,1.); +#211402 = DIRECTION('',(-1.,0.,0.)); +#211403 = ORIENTED_EDGE('',*,*,#211404,.T.); +#211404 = EDGE_CURVE('',#211397,#211405,#211407,.T.); +#211405 = VERTEX_POINT('',#211406); +#211406 = CARTESIAN_POINT('',(172.022512,-74.629651,1.585)); +#211407 = CIRCLE('',#211408,6.500002288385E-02); +#211408 = AXIS2_PLACEMENT_3D('',#211409,#211410,#211411); +#211409 = CARTESIAN_POINT('',(172.07142936015,-74.67245397711,1.585)); +#211410 = DIRECTION('',(0.,0.,-1.)); +#211411 = DIRECTION('',(-5.540887697237E-06,-0.999999999985,-0.)); +#211412 = ORIENTED_EDGE('',*,*,#211413,.T.); +#211413 = EDGE_CURVE('',#211405,#211414,#211416,.T.); +#211414 = VERTEX_POINT('',#211415); +#211415 = CARTESIAN_POINT('',(172.228184,-74.394597,1.585)); +#211416 = LINE('',#211417,#211418); +#211417 = CARTESIAN_POINT('',(172.022512,-74.629651,1.585)); +#211418 = VECTOR('',#211419,1.); +#211419 = DIRECTION('',(0.658504154528,0.75257709138,0.)); +#211420 = ORIENTED_EDGE('',*,*,#211421,.T.); +#211421 = EDGE_CURVE('',#211414,#211236,#211422,.T.); +#211422 = LINE('',#211423,#211424); +#211423 = CARTESIAN_POINT('',(172.228184,-74.394597,1.585)); +#211424 = VECTOR('',#211425,1.); +#211425 = DIRECTION('',(-1.,0.,0.)); +#211426 = PLANE('',#211427); +#211427 = AXIS2_PLACEMENT_3D('',#211428,#211429,#211430); +#211428 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211429 = DIRECTION('',(0.,0.,1.)); +#211430 = DIRECTION('',(1.,0.,-0.)); +#211431 = SHELL_BASED_SURFACE_MODEL('',(#211432)); +#211432 = OPEN_SHELL('',(#211433)); +#211433 = ADVANCED_FACE('',(#211434),#211569,.T.); +#211434 = FACE_BOUND('',#211435,.F.); +#211435 = EDGE_LOOP('',(#211436,#211447,#211455,#211463,#211471,#211480, + #211488,#211496,#211504,#211513,#211521,#211530,#211538,#211547, + #211555,#211563)); +#211436 = ORIENTED_EDGE('',*,*,#211437,.T.); +#211437 = EDGE_CURVE('',#211438,#211440,#211442,.T.); +#211438 = VERTEX_POINT('',#211439); +#211439 = CARTESIAN_POINT('',(185.009287,-73.981636,1.585)); +#211440 = VERTEX_POINT('',#211441); +#211441 = CARTESIAN_POINT('',(185.178286,-74.051638,1.585)); +#211442 = CIRCLE('',#211443,0.109999394362); +#211443 = AXIS2_PLACEMENT_3D('',#211444,#211445,#211446); +#211444 = CARTESIAN_POINT('',(185.0704,-74.07309674562,1.585)); +#211445 = DIRECTION('',(0.,0.,-1.)); +#211446 = DIRECTION('',(-0.555575786163,0.831465901784,0.)); +#211447 = ORIENTED_EDGE('',*,*,#211448,.T.); +#211448 = EDGE_CURVE('',#211440,#211449,#211451,.T.); +#211449 = VERTEX_POINT('',#211450); +#211450 = CARTESIAN_POINT('',(185.1804,-74.725003,1.585)); +#211451 = LINE('',#211452,#211453); +#211452 = CARTESIAN_POINT('',(185.178286,-74.051638,1.585)); +#211453 = VECTOR('',#211454,1.); +#211454 = DIRECTION('',(3.139440841247E-03,-0.999995071943,0.)); +#211455 = ORIENTED_EDGE('',*,*,#211456,.T.); +#211456 = EDGE_CURVE('',#211449,#211457,#211459,.T.); +#211457 = VERTEX_POINT('',#211458); +#211458 = CARTESIAN_POINT('',(185.722305,-74.725003,1.585)); +#211459 = LINE('',#211460,#211461); +#211460 = CARTESIAN_POINT('',(185.1804,-74.725003,1.585)); +#211461 = VECTOR('',#211462,1.); +#211462 = DIRECTION('',(1.,0.,0.)); +#211463 = ORIENTED_EDGE('',*,*,#211464,.T.); +#211464 = EDGE_CURVE('',#211457,#211465,#211467,.T.); +#211465 = VERTEX_POINT('',#211466); +#211466 = CARTESIAN_POINT('',(185.724419,-74.28021,1.585)); +#211467 = LINE('',#211468,#211469); +#211468 = CARTESIAN_POINT('',(185.722305,-74.725003,1.585)); +#211469 = VECTOR('',#211470,1.); +#211470 = DIRECTION('',(4.752718959153E-03,0.999988705767,0.)); +#211471 = ORIENTED_EDGE('',*,*,#211472,.T.); +#211472 = EDGE_CURVE('',#211465,#211473,#211475,.T.); +#211473 = VERTEX_POINT('',#211474); +#211474 = CARTESIAN_POINT('',(185.940191,-74.28021,1.585)); +#211475 = CIRCLE('',#211476,0.109999639072); +#211476 = AXIS2_PLACEMENT_3D('',#211477,#211478,#211479); +#211477 = CARTESIAN_POINT('',(185.832305,-74.30167,1.585)); +#211478 = DIRECTION('',(0.,0.,-1.)); +#211479 = DIRECTION('',(-0.980785036297,0.195091549218,0.)); +#211480 = ORIENTED_EDGE('',*,*,#211481,.T.); +#211481 = EDGE_CURVE('',#211473,#211482,#211484,.T.); +#211482 = VERTEX_POINT('',#211483); +#211483 = CARTESIAN_POINT('',(185.942305,-74.725003,1.585)); +#211484 = LINE('',#211485,#211486); +#211485 = CARTESIAN_POINT('',(185.940191,-74.28021,1.585)); +#211486 = VECTOR('',#211487,1.); +#211487 = DIRECTION('',(4.752718959153E-03,-0.999988705767,0.)); +#211488 = ORIENTED_EDGE('',*,*,#211489,.T.); +#211489 = EDGE_CURVE('',#211482,#211490,#211492,.T.); +#211490 = VERTEX_POINT('',#211491); +#211491 = CARTESIAN_POINT('',(186.5604,-74.725003,1.585)); +#211492 = LINE('',#211493,#211494); +#211493 = CARTESIAN_POINT('',(185.942305,-74.725003,1.585)); +#211494 = VECTOR('',#211495,1.); +#211495 = DIRECTION('',(1.,0.,0.)); +#211496 = ORIENTED_EDGE('',*,*,#211497,.T.); +#211497 = EDGE_CURVE('',#211490,#211498,#211500,.T.); +#211498 = VERTEX_POINT('',#211499); +#211499 = CARTESIAN_POINT('',(186.562514,-74.051638,1.585)); +#211500 = LINE('',#211501,#211502); +#211501 = CARTESIAN_POINT('',(186.5604,-74.725003,1.585)); +#211502 = VECTOR('',#211503,1.); +#211503 = DIRECTION('',(3.139440841289E-03,0.999995071943,0.)); +#211504 = ORIENTED_EDGE('',*,*,#211505,.T.); +#211505 = EDGE_CURVE('',#211498,#211506,#211508,.T.); +#211506 = VERTEX_POINT('',#211507); +#211507 = CARTESIAN_POINT('',(186.778286,-74.051638,1.585)); +#211508 = CIRCLE('',#211509,0.109999639072); +#211509 = AXIS2_PLACEMENT_3D('',#211510,#211511,#211512); +#211510 = CARTESIAN_POINT('',(186.6704,-74.073098,1.585)); +#211511 = DIRECTION('',(0.,0.,-1.)); +#211512 = DIRECTION('',(-0.980785036297,0.195091549218,0.)); +#211513 = ORIENTED_EDGE('',*,*,#211514,.T.); +#211514 = EDGE_CURVE('',#211506,#211515,#211517,.T.); +#211515 = VERTEX_POINT('',#211516); +#211516 = CARTESIAN_POINT('',(186.778286,-74.856463,1.585)); +#211517 = LINE('',#211518,#211519); +#211518 = CARTESIAN_POINT('',(186.778286,-74.051638,1.585)); +#211519 = VECTOR('',#211520,1.); +#211520 = DIRECTION('',(0.,-1.,0.)); +#211521 = ORIENTED_EDGE('',*,*,#211522,.T.); +#211522 = EDGE_CURVE('',#211515,#211523,#211525,.T.); +#211523 = VERTEX_POINT('',#211524); +#211524 = CARTESIAN_POINT('',(186.69186,-74.942889,1.585)); +#211525 = CIRCLE('',#211526,0.109995194153); +#211526 = AXIS2_PLACEMENT_3D('',#211527,#211528,#211529); +#211527 = CARTESIAN_POINT('',(186.67040378012,-74.83500678012,1.585)); +#211528 = DIRECTION('',(0.,0.,-1.)); +#211529 = DIRECTION('',(0.980790303675,-0.195065066626,0.)); +#211530 = ORIENTED_EDGE('',*,*,#211531,.T.); +#211531 = EDGE_CURVE('',#211523,#211532,#211534,.T.); +#211532 = VERTEX_POINT('',#211533); +#211533 = CARTESIAN_POINT('',(185.04894,-74.942889,1.585)); +#211534 = LINE('',#211535,#211536); +#211535 = CARTESIAN_POINT('',(186.69186,-74.942889,1.585)); +#211536 = VECTOR('',#211537,1.); +#211537 = DIRECTION('',(-1.,0.,0.)); +#211538 = ORIENTED_EDGE('',*,*,#211539,.T.); +#211539 = EDGE_CURVE('',#211532,#211540,#211542,.T.); +#211540 = VERTEX_POINT('',#211541); +#211541 = CARTESIAN_POINT('',(184.962514,-74.856463,1.585)); +#211542 = CIRCLE('',#211543,0.109995194153); +#211543 = AXIS2_PLACEMENT_3D('',#211544,#211545,#211546); +#211544 = CARTESIAN_POINT('',(185.07039621987,-74.83500678012,1.585)); +#211545 = DIRECTION('',(0.,0.,-1.)); +#211546 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#211547 = ORIENTED_EDGE('',*,*,#211548,.T.); +#211548 = EDGE_CURVE('',#211540,#211549,#211551,.T.); +#211549 = VERTEX_POINT('',#211550); +#211550 = CARTESIAN_POINT('',(184.962514,-74.051638,1.585)); +#211551 = LINE('',#211552,#211553); +#211552 = CARTESIAN_POINT('',(184.962514,-74.856463,1.585)); +#211553 = VECTOR('',#211554,1.); +#211554 = DIRECTION('',(0.,1.,0.)); +#211555 = ORIENTED_EDGE('',*,*,#211556,.T.); +#211556 = EDGE_CURVE('',#211549,#211557,#211559,.T.); +#211557 = VERTEX_POINT('',#211558); +#211558 = CARTESIAN_POINT('',(184.978938,-74.011985,1.585)); +#211559 = LINE('',#211560,#211561); +#211560 = CARTESIAN_POINT('',(184.962514,-74.051638,1.585)); +#211561 = VECTOR('',#211562,1.); +#211562 = DIRECTION('',(0.382667315962,0.923886207979,0.)); +#211563 = ORIENTED_EDGE('',*,*,#211564,.T.); +#211564 = EDGE_CURVE('',#211557,#211438,#211565,.T.); +#211565 = LINE('',#211566,#211567); +#211566 = CARTESIAN_POINT('',(184.978938,-74.011985,1.585)); +#211567 = VECTOR('',#211568,1.); +#211568 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#211569 = PLANE('',#211570); +#211570 = AXIS2_PLACEMENT_3D('',#211571,#211572,#211573); +#211571 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211572 = DIRECTION('',(0.,0.,1.)); +#211573 = DIRECTION('',(1.,0.,-0.)); +#211574 = SHELL_BASED_SURFACE_MODEL('',(#211575)); +#211575 = OPEN_SHELL('',(#211576)); +#211576 = ADVANCED_FACE('',(#211577),#211613,.T.); +#211577 = FACE_BOUND('',#211578,.F.); +#211578 = EDGE_LOOP('',(#211579,#211590,#211598,#211607)); +#211579 = ORIENTED_EDGE('',*,*,#211580,.T.); +#211580 = EDGE_CURVE('',#211581,#211583,#211585,.T.); +#211581 = VERTEX_POINT('',#211582); +#211582 = CARTESIAN_POINT('',(101.129392,-74.9056,1.585)); +#211583 = VERTEX_POINT('',#211584); +#211584 = CARTESIAN_POINT('',(101.129392,-74.7856,1.585)); +#211585 = CIRCLE('',#211586,6.000000000043E-02); +#211586 = AXIS2_PLACEMENT_3D('',#211587,#211588,#211589); +#211587 = CARTESIAN_POINT('',(101.12939177441,-74.8456,1.585)); +#211588 = DIRECTION('',(0.,0.,-1.)); +#211589 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#211590 = ORIENTED_EDGE('',*,*,#211591,.T.); +#211591 = EDGE_CURVE('',#211583,#211592,#211594,.T.); +#211592 = VERTEX_POINT('',#211593); +#211593 = CARTESIAN_POINT('',(101.603908,-74.7856,1.585)); +#211594 = LINE('',#211595,#211596); +#211595 = CARTESIAN_POINT('',(101.129392,-74.7856,1.585)); +#211596 = VECTOR('',#211597,1.); +#211597 = DIRECTION('',(1.,0.,0.)); +#211598 = ORIENTED_EDGE('',*,*,#211599,.T.); +#211599 = EDGE_CURVE('',#211592,#211600,#211602,.T.); +#211600 = VERTEX_POINT('',#211601); +#211601 = CARTESIAN_POINT('',(101.603908,-74.9056,1.585)); +#211602 = CIRCLE('',#211603,6.000000000043E-02); +#211603 = AXIS2_PLACEMENT_3D('',#211604,#211605,#211606); +#211604 = CARTESIAN_POINT('',(101.60390822558,-74.8456,1.585)); +#211605 = DIRECTION('',(0.,0.,-1.)); +#211606 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#211607 = ORIENTED_EDGE('',*,*,#211608,.T.); +#211608 = EDGE_CURVE('',#211600,#211581,#211609,.T.); +#211609 = LINE('',#211610,#211611); +#211610 = CARTESIAN_POINT('',(101.603908,-74.9056,1.585)); +#211611 = VECTOR('',#211612,1.); +#211612 = DIRECTION('',(-1.,0.,0.)); +#211613 = PLANE('',#211614); +#211614 = AXIS2_PLACEMENT_3D('',#211615,#211616,#211617); +#211615 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211616 = DIRECTION('',(0.,0.,1.)); +#211617 = DIRECTION('',(1.,0.,-0.)); +#211618 = SHELL_BASED_SURFACE_MODEL('',(#211619)); +#211619 = OPEN_SHELL('',(#211620)); +#211620 = ADVANCED_FACE('',(#211621),#211691,.T.); +#211621 = FACE_BOUND('',#211622,.F.); +#211622 = EDGE_LOOP('',(#211623,#211634,#211642,#211651,#211659,#211668, + #211676,#211685)); +#211623 = ORIENTED_EDGE('',*,*,#211624,.T.); +#211624 = EDGE_CURVE('',#211625,#211627,#211629,.T.); +#211625 = VERTEX_POINT('',#211626); +#211626 = CARTESIAN_POINT('',(103.861837,-74.509992,1.585)); +#211627 = VERTEX_POINT('',#211628); +#211628 = CARTESIAN_POINT('',(103.876469,-74.361433,1.585)); +#211629 = CIRCLE('',#211630,7.500006711463E-02); +#211630 = AXIS2_PLACEMENT_3D('',#211631,#211632,#211633); +#211631 = CARTESIAN_POINT('',(103.87646893288,-74.43643306711,1.585)); +#211632 = DIRECTION('',(0.,0.,-1.)); +#211633 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#211634 = ORIENTED_EDGE('',*,*,#211635,.T.); +#211635 = EDGE_CURVE('',#211627,#211636,#211638,.T.); +#211636 = VERTEX_POINT('',#211637); +#211637 = CARTESIAN_POINT('',(104.598159,-74.362162,1.585)); +#211638 = LINE('',#211639,#211640); +#211639 = CARTESIAN_POINT('',(103.876469,-74.361433,1.585)); +#211640 = VECTOR('',#211641,1.); +#211641 = DIRECTION('',(0.99999948982,-1.0101284874E-03,0.)); +#211642 = ORIENTED_EDGE('',*,*,#211643,.T.); +#211643 = EDGE_CURVE('',#211636,#211644,#211646,.T.); +#211644 = VERTEX_POINT('',#211645); +#211645 = CARTESIAN_POINT('',(104.950739,-74.71474,1.585)); +#211646 = CIRCLE('',#211647,0.383787726409); +#211647 = AXIS2_PLACEMENT_3D('',#211648,#211649,#211650); +#211648 = CARTESIAN_POINT('',(104.56812818139,-74.74477298896,1.585)); +#211649 = DIRECTION('',(0.,0.,-1.)); +#211650 = DIRECTION('',(7.824851224108E-02,0.996933884634,0.)); +#211651 = ORIENTED_EDGE('',*,*,#211652,.T.); +#211652 = EDGE_CURVE('',#211644,#211653,#211655,.T.); +#211653 = VERTEX_POINT('',#211654); +#211654 = CARTESIAN_POINT('',(104.950028,-74.832017,1.585)); +#211655 = LINE('',#211656,#211657); +#211656 = CARTESIAN_POINT('',(104.950739,-74.71474,1.585)); +#211657 = VECTOR('',#211658,1.); +#211658 = DIRECTION('',(-6.062458402254E-03,-0.99998162313,0.)); +#211659 = ORIENTED_EDGE('',*,*,#211660,.T.); +#211660 = EDGE_CURVE('',#211653,#211661,#211663,.T.); +#211661 = VERTEX_POINT('',#211662); +#211662 = CARTESIAN_POINT('',(104.801469,-74.817385,1.585)); +#211663 = CIRCLE('',#211664,7.500006711465E-02); +#211664 = AXIS2_PLACEMENT_3D('',#211665,#211666,#211667); +#211665 = CARTESIAN_POINT('',(104.87646906711,-74.81738506711,1.585)); +#211666 = DIRECTION('',(-0.,0.,-1.)); +#211667 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#211668 = ORIENTED_EDGE('',*,*,#211669,.T.); +#211669 = EDGE_CURVE('',#211661,#211670,#211672,.T.); +#211670 = VERTEX_POINT('',#211671); +#211671 = CARTESIAN_POINT('',(104.801469,-74.734317,1.585)); +#211672 = LINE('',#211673,#211674); +#211673 = CARTESIAN_POINT('',(104.801469,-74.817385,1.585)); +#211674 = VECTOR('',#211675,1.); +#211675 = DIRECTION('',(0.,1.,0.)); +#211676 = ORIENTED_EDGE('',*,*,#211677,.T.); +#211677 = EDGE_CURVE('',#211670,#211678,#211680,.T.); +#211678 = VERTEX_POINT('',#211679); +#211679 = CARTESIAN_POINT('',(104.578584,-74.511433,1.585)); +#211680 = CIRCLE('',#211681,0.239434552369); +#211681 = AXIS2_PLACEMENT_3D('',#211682,#211683,#211684); +#211682 = CARTESIAN_POINT('',(104.56257060777,-74.75033146407,1.585)); +#211683 = DIRECTION('',(0.,0.,1.)); +#211684 = DIRECTION('',(0.997760723601,6.688451569435E-02,-0.)); +#211685 = ORIENTED_EDGE('',*,*,#211686,.T.); +#211686 = EDGE_CURVE('',#211678,#211625,#211687,.T.); +#211687 = LINE('',#211688,#211689); +#211688 = CARTESIAN_POINT('',(104.578584,-74.511433,1.585)); +#211689 = VECTOR('',#211690,1.); +#211690 = DIRECTION('',(-0.999997979007,2.010468251347E-03,0.)); +#211691 = PLANE('',#211692); +#211692 = AXIS2_PLACEMENT_3D('',#211693,#211694,#211695); +#211693 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211694 = DIRECTION('',(0.,0.,1.)); +#211695 = DIRECTION('',(1.,0.,-0.)); +#211696 = SHELL_BASED_SURFACE_MODEL('',(#211697)); +#211697 = OPEN_SHELL('',(#211698)); +#211698 = ADVANCED_FACE('',(#211699),#211760,.T.); +#211699 = FACE_BOUND('',#211700,.F.); +#211700 = EDGE_LOOP('',(#211701,#211712,#211720,#211729,#211737,#211746, + #211754)); +#211701 = ORIENTED_EDGE('',*,*,#211702,.T.); +#211702 = EDGE_CURVE('',#211703,#211705,#211707,.T.); +#211703 = VERTEX_POINT('',#211704); +#211704 = CARTESIAN_POINT('',(174.19165,-73.8231,1.585)); +#211705 = VERTEX_POINT('',#211706); +#211706 = CARTESIAN_POINT('',(174.19165,-73.7031,1.585)); +#211707 = CIRCLE('',#211708,6.000000000042E-02); +#211708 = AXIS2_PLACEMENT_3D('',#211709,#211710,#211711); +#211709 = CARTESIAN_POINT('',(174.19164977441,-73.7631,1.585)); +#211710 = DIRECTION('',(0.,0.,-1.)); +#211711 = DIRECTION('',(3.75979472738E-06,-0.999999999993,0.)); +#211712 = ORIENTED_EDGE('',*,*,#211713,.T.); +#211713 = EDGE_CURVE('',#211705,#211714,#211716,.T.); +#211714 = VERTEX_POINT('',#211715); +#211715 = CARTESIAN_POINT('',(175.25165,-73.7031,1.585)); +#211716 = LINE('',#211717,#211718); +#211717 = CARTESIAN_POINT('',(174.19165,-73.7031,1.585)); +#211718 = VECTOR('',#211719,1.); +#211719 = DIRECTION('',(1.,0.,0.)); +#211720 = ORIENTED_EDGE('',*,*,#211721,.T.); +#211721 = EDGE_CURVE('',#211714,#211722,#211724,.T.); +#211722 = VERTEX_POINT('',#211723); +#211723 = CARTESIAN_POINT('',(175.31165,-73.7631,1.585)); +#211724 = CIRCLE('',#211725,5.999932016259E-02); +#211725 = AXIS2_PLACEMENT_3D('',#211726,#211727,#211728); +#211726 = CARTESIAN_POINT('',(175.25165067984,-73.76309932015,1.585)); +#211727 = DIRECTION('',(0.,0.,-1.)); +#211728 = DIRECTION('',(-1.133081564773E-05,0.999999999936,0.)); +#211729 = ORIENTED_EDGE('',*,*,#211730,.T.); +#211730 = EDGE_CURVE('',#211722,#211731,#211733,.T.); +#211731 = VERTEX_POINT('',#211732); +#211732 = CARTESIAN_POINT('',(175.31165,-74.8231,1.585)); +#211733 = LINE('',#211734,#211735); +#211734 = CARTESIAN_POINT('',(175.31165,-73.7631,1.585)); +#211735 = VECTOR('',#211736,1.); +#211736 = DIRECTION('',(0.,-1.,0.)); +#211737 = ORIENTED_EDGE('',*,*,#211738,.T.); +#211738 = EDGE_CURVE('',#211731,#211739,#211741,.T.); +#211739 = VERTEX_POINT('',#211740); +#211740 = CARTESIAN_POINT('',(175.19165,-74.8231,1.585)); +#211741 = CIRCLE('',#211742,6.00000000004E-02); +#211742 = AXIS2_PLACEMENT_3D('',#211743,#211744,#211745); +#211743 = CARTESIAN_POINT('',(175.25165,-74.82310022558,1.585)); +#211744 = DIRECTION('',(0.,0.,-1.)); +#211745 = DIRECTION('',(0.999999999993,3.759794727381E-06,0.)); +#211746 = ORIENTED_EDGE('',*,*,#211747,.T.); +#211747 = EDGE_CURVE('',#211739,#211748,#211750,.T.); +#211748 = VERTEX_POINT('',#211749); +#211749 = CARTESIAN_POINT('',(175.19165,-73.8231,1.585)); +#211750 = LINE('',#211751,#211752); +#211751 = CARTESIAN_POINT('',(175.19165,-74.8231,1.585)); +#211752 = VECTOR('',#211753,1.); +#211753 = DIRECTION('',(0.,1.,0.)); +#211754 = ORIENTED_EDGE('',*,*,#211755,.T.); +#211755 = EDGE_CURVE('',#211748,#211703,#211756,.T.); +#211756 = LINE('',#211757,#211758); +#211757 = CARTESIAN_POINT('',(175.19165,-73.8231,1.585)); +#211758 = VECTOR('',#211759,1.); +#211759 = DIRECTION('',(-1.,0.,0.)); +#211760 = PLANE('',#211761); +#211761 = AXIS2_PLACEMENT_3D('',#211762,#211763,#211764); +#211762 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211763 = DIRECTION('',(0.,0.,1.)); +#211764 = DIRECTION('',(1.,0.,-0.)); +#211765 = SHELL_BASED_SURFACE_MODEL('',(#211766)); +#211766 = OPEN_SHELL('',(#211767)); +#211767 = ADVANCED_FACE('',(#211768),#211829,.T.); +#211768 = FACE_BOUND('',#211769,.F.); +#211769 = EDGE_LOOP('',(#211770,#211781,#211789,#211798,#211806,#211815, + #211823)); +#211770 = ORIENTED_EDGE('',*,*,#211771,.T.); +#211771 = EDGE_CURVE('',#211772,#211774,#211776,.T.); +#211772 = VERTEX_POINT('',#211773); +#211773 = CARTESIAN_POINT('',(196.54165,-73.8231,1.585)); +#211774 = VERTEX_POINT('',#211775); +#211775 = CARTESIAN_POINT('',(196.54165,-73.7031,1.585)); +#211776 = CIRCLE('',#211777,6.000000000042E-02); +#211777 = AXIS2_PLACEMENT_3D('',#211778,#211779,#211780); +#211778 = CARTESIAN_POINT('',(196.54164977441,-73.7631,1.585)); +#211779 = DIRECTION('',(0.,0.,-1.)); +#211780 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#211781 = ORIENTED_EDGE('',*,*,#211782,.T.); +#211782 = EDGE_CURVE('',#211774,#211783,#211785,.T.); +#211783 = VERTEX_POINT('',#211784); +#211784 = CARTESIAN_POINT('',(197.60165,-73.7031,1.585)); +#211785 = LINE('',#211786,#211787); +#211786 = CARTESIAN_POINT('',(196.54165,-73.7031,1.585)); +#211787 = VECTOR('',#211788,1.); +#211788 = DIRECTION('',(1.,0.,0.)); +#211789 = ORIENTED_EDGE('',*,*,#211790,.T.); +#211790 = EDGE_CURVE('',#211783,#211791,#211793,.T.); +#211791 = VERTEX_POINT('',#211792); +#211792 = CARTESIAN_POINT('',(197.66165,-73.7631,1.585)); +#211793 = CIRCLE('',#211794,5.999932016259E-02); +#211794 = AXIS2_PLACEMENT_3D('',#211795,#211796,#211797); +#211795 = CARTESIAN_POINT('',(197.60165067984,-73.76309932015,1.585)); +#211796 = DIRECTION('',(0.,0.,-1.)); +#211797 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#211798 = ORIENTED_EDGE('',*,*,#211799,.T.); +#211799 = EDGE_CURVE('',#211791,#211800,#211802,.T.); +#211800 = VERTEX_POINT('',#211801); +#211801 = CARTESIAN_POINT('',(197.66165,-74.8231,1.585)); +#211802 = LINE('',#211803,#211804); +#211803 = CARTESIAN_POINT('',(197.66165,-73.7631,1.585)); +#211804 = VECTOR('',#211805,1.); +#211805 = DIRECTION('',(0.,-1.,0.)); +#211806 = ORIENTED_EDGE('',*,*,#211807,.T.); +#211807 = EDGE_CURVE('',#211800,#211808,#211810,.T.); +#211808 = VERTEX_POINT('',#211809); +#211809 = CARTESIAN_POINT('',(197.54165,-74.8231,1.585)); +#211810 = CIRCLE('',#211811,6.000000000042E-02); +#211811 = AXIS2_PLACEMENT_3D('',#211812,#211813,#211814); +#211812 = CARTESIAN_POINT('',(197.60165,-74.82310022558,1.585)); +#211813 = DIRECTION('',(0.,0.,-1.)); +#211814 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#211815 = ORIENTED_EDGE('',*,*,#211816,.T.); +#211816 = EDGE_CURVE('',#211808,#211817,#211819,.T.); +#211817 = VERTEX_POINT('',#211818); +#211818 = CARTESIAN_POINT('',(197.54165,-73.8231,1.585)); +#211819 = LINE('',#211820,#211821); +#211820 = CARTESIAN_POINT('',(197.54165,-74.8231,1.585)); +#211821 = VECTOR('',#211822,1.); +#211822 = DIRECTION('',(0.,1.,0.)); +#211823 = ORIENTED_EDGE('',*,*,#211824,.T.); +#211824 = EDGE_CURVE('',#211817,#211772,#211825,.T.); +#211825 = LINE('',#211826,#211827); +#211826 = CARTESIAN_POINT('',(197.54165,-73.8231,1.585)); +#211827 = VECTOR('',#211828,1.); +#211828 = DIRECTION('',(-1.,0.,0.)); +#211829 = PLANE('',#211830); +#211830 = AXIS2_PLACEMENT_3D('',#211831,#211832,#211833); +#211831 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211832 = DIRECTION('',(0.,0.,1.)); +#211833 = DIRECTION('',(1.,0.,-0.)); +#211834 = SHELL_BASED_SURFACE_MODEL('',(#211835)); +#211835 = OPEN_SHELL('',(#211836)); +#211836 = ADVANCED_FACE('',(#211837),#211898,.T.); +#211837 = FACE_BOUND('',#211838,.F.); +#211838 = EDGE_LOOP('',(#211839,#211850,#211858,#211867,#211875,#211883, + #211892)); +#211839 = ORIENTED_EDGE('',*,*,#211840,.T.); +#211840 = EDGE_CURVE('',#211841,#211843,#211845,.T.); +#211841 = VERTEX_POINT('',#211842); +#211842 = CARTESIAN_POINT('',(105.80165,-72.7731,1.585)); +#211843 = VERTEX_POINT('',#211844); +#211844 = CARTESIAN_POINT('',(105.86165,-72.7131,1.585)); +#211845 = CIRCLE('',#211846,5.999932016263E-02); +#211846 = AXIS2_PLACEMENT_3D('',#211847,#211848,#211849); +#211847 = CARTESIAN_POINT('',(105.86164932015,-72.77309932015,1.585)); +#211848 = DIRECTION('',(0.,0.,-1.)); +#211849 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#211850 = ORIENTED_EDGE('',*,*,#211851,.T.); +#211851 = EDGE_CURVE('',#211843,#211852,#211854,.T.); +#211852 = VERTEX_POINT('',#211853); +#211853 = CARTESIAN_POINT('',(107.19165,-72.7131,1.585)); +#211854 = LINE('',#211855,#211856); +#211855 = CARTESIAN_POINT('',(105.86165,-72.7131,1.585)); +#211856 = VECTOR('',#211857,1.); +#211857 = DIRECTION('',(1.,0.,0.)); +#211858 = ORIENTED_EDGE('',*,*,#211859,.T.); +#211859 = EDGE_CURVE('',#211852,#211860,#211862,.T.); +#211860 = VERTEX_POINT('',#211861); +#211861 = CARTESIAN_POINT('',(107.19165,-72.8331,1.585)); +#211862 = CIRCLE('',#211863,6.000000000042E-02); +#211863 = AXIS2_PLACEMENT_3D('',#211864,#211865,#211866); +#211864 = CARTESIAN_POINT('',(107.19165022558,-72.7731,1.585)); +#211865 = DIRECTION('',(0.,0.,-1.)); +#211866 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#211867 = ORIENTED_EDGE('',*,*,#211868,.T.); +#211868 = EDGE_CURVE('',#211860,#211869,#211871,.T.); +#211869 = VERTEX_POINT('',#211870); +#211870 = CARTESIAN_POINT('',(105.92165,-72.8331,1.585)); +#211871 = LINE('',#211872,#211873); +#211872 = CARTESIAN_POINT('',(107.19165,-72.8331,1.585)); +#211873 = VECTOR('',#211874,1.); +#211874 = DIRECTION('',(-1.,0.,0.)); +#211875 = ORIENTED_EDGE('',*,*,#211876,.T.); +#211876 = EDGE_CURVE('',#211869,#211877,#211879,.T.); +#211877 = VERTEX_POINT('',#211878); +#211878 = CARTESIAN_POINT('',(105.92165,-74.1031,1.585)); +#211879 = LINE('',#211880,#211881); +#211880 = CARTESIAN_POINT('',(105.92165,-72.8331,1.585)); +#211881 = VECTOR('',#211882,1.); +#211882 = DIRECTION('',(0.,-1.,0.)); +#211883 = ORIENTED_EDGE('',*,*,#211884,.T.); +#211884 = EDGE_CURVE('',#211877,#211885,#211887,.T.); +#211885 = VERTEX_POINT('',#211886); +#211886 = CARTESIAN_POINT('',(105.80165,-74.1031,1.585)); +#211887 = CIRCLE('',#211888,6.000000000042E-02); +#211888 = AXIS2_PLACEMENT_3D('',#211889,#211890,#211891); +#211889 = CARTESIAN_POINT('',(105.86165,-74.10310022558,1.585)); +#211890 = DIRECTION('',(0.,0.,-1.)); +#211891 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#211892 = ORIENTED_EDGE('',*,*,#211893,.T.); +#211893 = EDGE_CURVE('',#211885,#211841,#211894,.T.); +#211894 = LINE('',#211895,#211896); +#211895 = CARTESIAN_POINT('',(105.80165,-74.1031,1.585)); +#211896 = VECTOR('',#211897,1.); +#211897 = DIRECTION('',(0.,1.,0.)); +#211898 = PLANE('',#211899); +#211899 = AXIS2_PLACEMENT_3D('',#211900,#211901,#211902); +#211900 = CARTESIAN_POINT('',(0.,0.,1.585)); +#211901 = DIRECTION('',(0.,0.,1.)); +#211902 = DIRECTION('',(1.,0.,-0.)); +#211903 = SHELL_BASED_SURFACE_MODEL('',(#211904)); +#211904 = OPEN_SHELL('',(#211905)); +#211905 = ADVANCED_FACE('',(#211906),#212081,.T.); +#211906 = FACE_BOUND('',#211907,.F.); +#211907 = EDGE_LOOP('',(#211908,#211918,#211926,#211934,#211942,#211950, + #211959,#211967,#211976,#211984,#211992,#212000,#212008,#212016, + #212025,#212033,#212041,#212049,#212058,#212066,#212075)); +#211908 = ORIENTED_EDGE('',*,*,#211909,.T.); +#211909 = EDGE_CURVE('',#211910,#211912,#211914,.T.); +#211910 = VERTEX_POINT('',#211911); +#211911 = CARTESIAN_POINT('',(103.931866,-73.420934,1.585)); +#211912 = VERTEX_POINT('',#211913); +#211913 = CARTESIAN_POINT('',(104.052313,-73.362874,1.585)); +#211914 = LINE('',#211915,#211916); +#211915 = CARTESIAN_POINT('',(103.931866,-73.420934,1.585)); +#211916 = VECTOR('',#211917,1.); +#211917 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#211918 = ORIENTED_EDGE('',*,*,#211919,.T.); +#211919 = EDGE_CURVE('',#211912,#211920,#211922,.T.); +#211920 = VERTEX_POINT('',#211921); +#211921 = CARTESIAN_POINT('',(104.169588,-73.362162,1.585)); +#211922 = LINE('',#211923,#211924); +#211923 = CARTESIAN_POINT('',(104.052313,-73.362874,1.585)); +#211924 = VECTOR('',#211925,1.); +#211925 = DIRECTION('',(0.999981570774,6.071088283078E-03,0.)); +#211926 = ORIENTED_EDGE('',*,*,#211927,.T.); +#211927 = EDGE_CURVE('',#211920,#211928,#211930,.T.); +#211928 = VERTEX_POINT('',#211929); +#211929 = CARTESIAN_POINT('',(104.346708,-73.421692,1.585)); +#211930 = LINE('',#211931,#211932); +#211931 = CARTESIAN_POINT('',(104.169588,-73.362162,1.585)); +#211932 = VECTOR('',#211933,1.); +#211933 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#211934 = ORIENTED_EDGE('',*,*,#211935,.T.); +#211935 = EDGE_CURVE('',#211928,#211936,#211938,.T.); +#211936 = VERTEX_POINT('',#211937); +#211937 = CARTESIAN_POINT('',(104.801469,-73.874414,1.585)); +#211938 = LINE('',#211939,#211940); +#211939 = CARTESIAN_POINT('',(104.346708,-73.421692,1.585)); +#211940 = VECTOR('',#211941,1.); +#211941 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#211942 = ORIENTED_EDGE('',*,*,#211943,.T.); +#211943 = EDGE_CURVE('',#211936,#211944,#211946,.T.); +#211944 = VERTEX_POINT('',#211945); +#211945 = CARTESIAN_POINT('',(104.80291,-73.421801,1.585)); +#211946 = LINE('',#211947,#211948); +#211947 = CARTESIAN_POINT('',(104.801469,-73.874414,1.585)); +#211948 = VECTOR('',#211949,1.); +#211949 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#211950 = ORIENTED_EDGE('',*,*,#211951,.T.); +#211951 = EDGE_CURVE('',#211944,#211952,#211954,.T.); +#211952 = VERTEX_POINT('',#211953); +#211953 = CARTESIAN_POINT('',(104.951469,-73.436433,1.585)); +#211954 = CIRCLE('',#211955,7.500006711465E-02); +#211955 = AXIS2_PLACEMENT_3D('',#211956,#211957,#211958); +#211956 = CARTESIAN_POINT('',(104.87646893288,-73.43643293288,1.585)); +#211957 = DIRECTION('',(0.,0.,-1.)); +#211958 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#211959 = ORIENTED_EDGE('',*,*,#211960,.T.); +#211960 = EDGE_CURVE('',#211952,#211961,#211963,.T.); +#211961 = VERTEX_POINT('',#211962); +#211962 = CARTESIAN_POINT('',(104.950028,-74.070112,1.585)); +#211963 = LINE('',#211964,#211965); +#211964 = CARTESIAN_POINT('',(104.951469,-73.436433,1.585)); +#211965 = VECTOR('',#211966,1.); +#211966 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#211967 = ORIENTED_EDGE('',*,*,#211968,.T.); +#211968 = EDGE_CURVE('',#211961,#211969,#211971,.T.); +#211969 = VERTEX_POINT('',#211970); +#211970 = CARTESIAN_POINT('',(104.891101,-74.129039,1.585)); +#211971 = CIRCLE('',#211972,7.499663284019E-02); +#211972 = AXIS2_PLACEMENT_3D('',#211973,#211974,#211975); +#211973 = CARTESIAN_POINT('',(104.87647198775,-74.05548298775,1.585)); +#211974 = DIRECTION('',(0.,0.,-1.)); +#211975 = DIRECTION('',(0.980790863048,-0.195062254064,0.)); +#211976 = ORIENTED_EDGE('',*,*,#211977,.T.); +#211977 = EDGE_CURVE('',#211969,#211978,#211980,.T.); +#211978 = VERTEX_POINT('',#211979); +#211979 = CARTESIAN_POINT('',(104.853918,-74.125759,1.585)); +#211980 = LINE('',#211981,#211982); +#211981 = CARTESIAN_POINT('',(104.891101,-74.129039,1.585)); +#211982 = VECTOR('',#211983,1.); +#211983 = DIRECTION('',(-0.996131850392,8.78711365218E-02,0.)); +#211984 = ORIENTED_EDGE('',*,*,#211985,.T.); +#211985 = EDGE_CURVE('',#211978,#211986,#211988,.T.); +#211986 = VERTEX_POINT('',#211987); +#211987 = CARTESIAN_POINT('',(104.823436,-74.108513,1.585)); +#211988 = LINE('',#211989,#211990); +#211989 = CARTESIAN_POINT('',(104.853918,-74.125759,1.585)); +#211990 = VECTOR('',#211991,1.); +#211991 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#211992 = ORIENTED_EDGE('',*,*,#211993,.T.); +#211993 = EDGE_CURVE('',#211986,#211994,#211996,.T.); +#211994 = VERTEX_POINT('',#211995); +#211995 = CARTESIAN_POINT('',(104.264526,-73.549604,1.585)); +#211996 = LINE('',#211997,#211998); +#211997 = CARTESIAN_POINT('',(104.823436,-74.108513,1.585)); +#211998 = VECTOR('',#211999,1.); +#211999 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#212000 = ORIENTED_EDGE('',*,*,#212001,.T.); +#212001 = EDGE_CURVE('',#211994,#212002,#212004,.T.); +#212002 = VERTEX_POINT('',#212003); +#212003 = CARTESIAN_POINT('',(104.150013,-73.511433,1.585)); +#212004 = LINE('',#212005,#212006); +#212005 = CARTESIAN_POINT('',(104.264526,-73.549604,1.585)); +#212006 = VECTOR('',#212007,1.); +#212007 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#212008 = ORIENTED_EDGE('',*,*,#212009,.T.); +#212009 = EDGE_CURVE('',#212002,#212010,#212012,.T.); +#212010 = VERTEX_POINT('',#212011); +#212011 = CARTESIAN_POINT('',(104.08465,-73.511433,1.585)); +#212012 = LINE('',#212013,#212014); +#212013 = CARTESIAN_POINT('',(104.150013,-73.511433,1.585)); +#212014 = VECTOR('',#212015,1.); +#212015 = DIRECTION('',(-1.,0.,0.)); +#212016 = ORIENTED_EDGE('',*,*,#212017,.T.); +#212017 = EDGE_CURVE('',#212010,#212018,#212020,.T.); +#212018 = VERTEX_POINT('',#212019); +#212019 = CARTESIAN_POINT('',(103.951469,-73.644614,1.585)); +#212020 = CIRCLE('',#212021,0.18686440374); +#212021 = AXIS2_PLACEMENT_3D('',#212022,#212023,#212024); +#212022 = CARTESIAN_POINT('',(104.132186,-73.69215,1.585)); +#212023 = DIRECTION('',(0.,0.,1.)); +#212024 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#212025 = ORIENTED_EDGE('',*,*,#212026,.T.); +#212026 = EDGE_CURVE('',#212018,#212027,#212029,.T.); +#212027 = VERTEX_POINT('',#212028); +#212028 = CARTESIAN_POINT('',(103.951469,-73.847299,1.585)); +#212029 = LINE('',#212030,#212031); +#212030 = CARTESIAN_POINT('',(103.951469,-73.644614,1.585)); +#212031 = VECTOR('',#212032,1.); +#212032 = DIRECTION('',(0.,-1.,0.)); +#212033 = ORIENTED_EDGE('',*,*,#212034,.T.); +#212034 = EDGE_CURVE('',#212027,#212035,#212037,.T.); +#212035 = VERTEX_POINT('',#212036); +#212036 = CARTESIAN_POINT('',(103.985727,-73.915815,1.585)); +#212037 = LINE('',#212038,#212039); +#212038 = CARTESIAN_POINT('',(103.951469,-73.847299,1.585)); +#212039 = VECTOR('',#212040,1.); +#212040 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#212041 = ORIENTED_EDGE('',*,*,#212042,.T.); +#212042 = EDGE_CURVE('',#212035,#212043,#212045,.T.); +#212043 = VERTEX_POINT('',#212044); +#212044 = CARTESIAN_POINT('',(104.034067,-73.966193,1.585)); +#212045 = LINE('',#212046,#212047); +#212046 = CARTESIAN_POINT('',(103.985727,-73.915815,1.585)); +#212047 = VECTOR('',#212048,1.); +#212048 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#212049 = ORIENTED_EDGE('',*,*,#212050,.T.); +#212050 = EDGE_CURVE('',#212043,#212051,#212053,.T.); +#212051 = VERTEX_POINT('',#212052); +#212052 = CARTESIAN_POINT('',(103.918674,-74.060894,1.585)); +#212053 = CIRCLE('',#212054,7.500003178656E-02); +#212054 = AXIS2_PLACEMENT_3D('',#212055,#212056,#212057); +#212055 = CARTESIAN_POINT('',(103.97170656212,-74.0078605,1.585)); +#212056 = DIRECTION('',(0.,0.,-1.)); +#212057 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#212058 = ORIENTED_EDGE('',*,*,#212059,.T.); +#212059 = EDGE_CURVE('',#212051,#212060,#212062,.T.); +#212060 = VERTEX_POINT('',#212061); +#212061 = CARTESIAN_POINT('',(103.857006,-73.993783,1.585)); +#212062 = LINE('',#212063,#212064); +#212063 = CARTESIAN_POINT('',(103.918674,-74.060894,1.585)); +#212064 = VECTOR('',#212065,1.); +#212065 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#212066 = ORIENTED_EDGE('',*,*,#212067,.T.); +#212067 = EDGE_CURVE('',#212060,#212068,#212070,.T.); +#212068 = VERTEX_POINT('',#212069); +#212069 = CARTESIAN_POINT('',(103.866336,-73.484387,1.585)); +#212070 = CIRCLE('',#212071,0.450051227017); +#212071 = AXIS2_PLACEMENT_3D('',#212072,#212073,#212074); +#212072 = CARTESIAN_POINT('',(104.23262532415,-73.74587932866,1.585)); +#212073 = DIRECTION('',(0.,0.,-1.)); +#212074 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#212075 = ORIENTED_EDGE('',*,*,#212076,.T.); +#212076 = EDGE_CURVE('',#212068,#211910,#212077,.T.); +#212077 = LINE('',#212078,#212079); +#212078 = CARTESIAN_POINT('',(103.866336,-73.484387,1.585)); +#212079 = VECTOR('',#212080,1.); +#212080 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#212081 = PLANE('',#212082); +#212082 = AXIS2_PLACEMENT_3D('',#212083,#212084,#212085); +#212083 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212084 = DIRECTION('',(0.,0.,1.)); +#212085 = DIRECTION('',(1.,0.,-0.)); +#212086 = SHELL_BASED_SURFACE_MODEL('',(#212087)); +#212087 = OPEN_SHELL('',(#212088)); +#212088 = ADVANCED_FACE('',(#212089),#212125,.T.); +#212089 = FACE_BOUND('',#212090,.F.); +#212090 = EDGE_LOOP('',(#212091,#212102,#212110,#212119)); +#212091 = ORIENTED_EDGE('',*,*,#212092,.T.); +#212092 = EDGE_CURVE('',#212093,#212095,#212097,.T.); +#212093 = VERTEX_POINT('',#212094); +#212094 = CARTESIAN_POINT('',(101.129392,-73.8606,1.585)); +#212095 = VERTEX_POINT('',#212096); +#212096 = CARTESIAN_POINT('',(101.129392,-73.7406,1.585)); +#212097 = CIRCLE('',#212098,6.000000000042E-02); +#212098 = AXIS2_PLACEMENT_3D('',#212099,#212100,#212101); +#212099 = CARTESIAN_POINT('',(101.12939177441,-73.8006,1.585)); +#212100 = DIRECTION('',(0.,0.,-1.)); +#212101 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#212102 = ORIENTED_EDGE('',*,*,#212103,.T.); +#212103 = EDGE_CURVE('',#212095,#212104,#212106,.T.); +#212104 = VERTEX_POINT('',#212105); +#212105 = CARTESIAN_POINT('',(101.603908,-73.7406,1.585)); +#212106 = LINE('',#212107,#212108); +#212107 = CARTESIAN_POINT('',(101.129392,-73.7406,1.585)); +#212108 = VECTOR('',#212109,1.); +#212109 = DIRECTION('',(1.,0.,0.)); +#212110 = ORIENTED_EDGE('',*,*,#212111,.T.); +#212111 = EDGE_CURVE('',#212104,#212112,#212114,.T.); +#212112 = VERTEX_POINT('',#212113); +#212113 = CARTESIAN_POINT('',(101.603908,-73.8606,1.585)); +#212114 = CIRCLE('',#212115,6.000000000043E-02); +#212115 = AXIS2_PLACEMENT_3D('',#212116,#212117,#212118); +#212116 = CARTESIAN_POINT('',(101.60390822558,-73.8006,1.585)); +#212117 = DIRECTION('',(0.,0.,-1.)); +#212118 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#212119 = ORIENTED_EDGE('',*,*,#212120,.T.); +#212120 = EDGE_CURVE('',#212112,#212093,#212121,.T.); +#212121 = LINE('',#212122,#212123); +#212122 = CARTESIAN_POINT('',(101.603908,-73.8606,1.585)); +#212123 = VECTOR('',#212124,1.); +#212124 = DIRECTION('',(-1.,0.,0.)); +#212125 = PLANE('',#212126); +#212126 = AXIS2_PLACEMENT_3D('',#212127,#212128,#212129); +#212127 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212128 = DIRECTION('',(0.,0.,1.)); +#212129 = DIRECTION('',(1.,0.,-0.)); +#212130 = SHELL_BASED_SURFACE_MODEL('',(#212131)); +#212131 = OPEN_SHELL('',(#212132)); +#212132 = ADVANCED_FACE('',(#212133),#212202,.T.); +#212133 = FACE_BOUND('',#212134,.F.); +#212134 = EDGE_LOOP('',(#212135,#212146,#212154,#212162,#212171,#212179, + #212188,#212196)); +#212135 = ORIENTED_EDGE('',*,*,#212136,.T.); +#212136 = EDGE_CURVE('',#212137,#212139,#212141,.T.); +#212137 = VERTEX_POINT('',#212138); +#212138 = CARTESIAN_POINT('',(207.361217,-72.400139,1.585)); +#212139 = VERTEX_POINT('',#212140); +#212140 = CARTESIAN_POINT('',(207.47665,-72.4231,1.585)); +#212141 = CIRCLE('',#212142,6.000007318647E-02); +#212142 = AXIS2_PLACEMENT_3D('',#212143,#212144,#212145); +#212143 = CARTESIAN_POINT('',(207.41664992681,-72.42309982331,1.585)); +#212144 = DIRECTION('',(0.,0.,-1.)); +#212145 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#212146 = ORIENTED_EDGE('',*,*,#212147,.T.); +#212147 = EDGE_CURVE('',#212139,#212148,#212150,.T.); +#212148 = VERTEX_POINT('',#212149); +#212149 = CARTESIAN_POINT('',(207.47665,-73.6131,1.585)); +#212150 = LINE('',#212151,#212152); +#212151 = CARTESIAN_POINT('',(207.47665,-72.4231,1.585)); +#212152 = VECTOR('',#212153,1.); +#212153 = DIRECTION('',(0.,-1.,0.)); +#212154 = ORIENTED_EDGE('',*,*,#212155,.T.); +#212155 = EDGE_CURVE('',#212148,#212156,#212158,.T.); +#212156 = VERTEX_POINT('',#212157); +#212157 = CARTESIAN_POINT('',(208.66665,-73.6131,1.585)); +#212158 = LINE('',#212159,#212160); +#212159 = CARTESIAN_POINT('',(207.47665,-73.6131,1.585)); +#212160 = VECTOR('',#212161,1.); +#212161 = DIRECTION('',(1.,0.,0.)); +#212162 = ORIENTED_EDGE('',*,*,#212163,.T.); +#212163 = EDGE_CURVE('',#212156,#212164,#212166,.T.); +#212164 = VERTEX_POINT('',#212165); +#212165 = CARTESIAN_POINT('',(208.66665,-73.7331,1.585)); +#212166 = CIRCLE('',#212167,6.000000000042E-02); +#212167 = AXIS2_PLACEMENT_3D('',#212168,#212169,#212170); +#212168 = CARTESIAN_POINT('',(208.66665022558,-73.6731,1.585)); +#212169 = DIRECTION('',(0.,0.,-1.)); +#212170 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#212171 = ORIENTED_EDGE('',*,*,#212172,.T.); +#212172 = EDGE_CURVE('',#212164,#212173,#212175,.T.); +#212173 = VERTEX_POINT('',#212174); +#212174 = CARTESIAN_POINT('',(207.41665,-73.7331,1.585)); +#212175 = LINE('',#212176,#212177); +#212176 = CARTESIAN_POINT('',(208.66665,-73.7331,1.585)); +#212177 = VECTOR('',#212178,1.); +#212178 = DIRECTION('',(-1.,0.,0.)); +#212179 = ORIENTED_EDGE('',*,*,#212180,.T.); +#212180 = EDGE_CURVE('',#212173,#212181,#212183,.T.); +#212181 = VERTEX_POINT('',#212182); +#212182 = CARTESIAN_POINT('',(207.35665,-73.6731,1.585)); +#212183 = CIRCLE('',#212184,5.999932016257E-02); +#212184 = AXIS2_PLACEMENT_3D('',#212185,#212186,#212187); +#212185 = CARTESIAN_POINT('',(207.41664932015,-73.67310067984,1.585)); +#212186 = DIRECTION('',(0.,0.,-1.)); +#212187 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#212188 = ORIENTED_EDGE('',*,*,#212189,.T.); +#212189 = EDGE_CURVE('',#212181,#212190,#212192,.T.); +#212190 = VERTEX_POINT('',#212191); +#212191 = CARTESIAN_POINT('',(207.35665,-72.4231,1.585)); +#212192 = LINE('',#212193,#212194); +#212193 = CARTESIAN_POINT('',(207.35665,-73.6731,1.585)); +#212194 = VECTOR('',#212195,1.); +#212195 = DIRECTION('',(0.,1.,0.)); +#212196 = ORIENTED_EDGE('',*,*,#212197,.T.); +#212197 = EDGE_CURVE('',#212190,#212137,#212198,.T.); +#212198 = LINE('',#212199,#212200); +#212199 = CARTESIAN_POINT('',(207.35665,-72.4231,1.585)); +#212200 = VECTOR('',#212201,1.); +#212201 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#212202 = PLANE('',#212203); +#212203 = AXIS2_PLACEMENT_3D('',#212204,#212205,#212206); +#212204 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212205 = DIRECTION('',(0.,0.,1.)); +#212206 = DIRECTION('',(1.,0.,-0.)); +#212207 = SHELL_BASED_SURFACE_MODEL('',(#212208)); +#212208 = OPEN_SHELL('',(#212209)); +#212209 = ADVANCED_FACE('',(#212210,#212375),#212442,.T.); +#212210 = FACE_BOUND('',#212211,.F.); +#212211 = EDGE_LOOP('',(#212212,#212222,#212230,#212238,#212246,#212254, + #212262,#212270,#212278,#212286,#212295,#212303,#212311,#212319, + #212328,#212336,#212345,#212353,#212361,#212369)); +#212212 = ORIENTED_EDGE('',*,*,#212213,.T.); +#212213 = EDGE_CURVE('',#212214,#212216,#212218,.T.); +#212214 = VERTEX_POINT('',#212215); +#212215 = CARTESIAN_POINT('',(185.164351,-72.456715,1.585)); +#212216 = VERTEX_POINT('',#212217); +#212217 = CARTESIAN_POINT('',(185.346108,-72.367005,1.585)); +#212218 = LINE('',#212219,#212220); +#212219 = CARTESIAN_POINT('',(185.164351,-72.456715,1.585)); +#212220 = VECTOR('',#212221,1.); +#212221 = DIRECTION('',(0.896721277909,0.442595695578,0.)); +#212222 = ORIENTED_EDGE('',*,*,#212223,.T.); +#212223 = EDGE_CURVE('',#212216,#212224,#212226,.T.); +#212224 = VERTEX_POINT('',#212225); +#212225 = CARTESIAN_POINT('',(185.375162,-72.363098,1.585)); +#212226 = LINE('',#212227,#212228); +#212227 = CARTESIAN_POINT('',(185.346108,-72.367005,1.585)); +#212228 = VECTOR('',#212229,1.); +#212229 = DIRECTION('',(0.991079213316,0.13327412702,0.)); +#212230 = ORIENTED_EDGE('',*,*,#212231,.T.); +#212231 = EDGE_CURVE('',#212224,#212232,#212234,.T.); +#212232 = VERTEX_POINT('',#212233); +#212233 = CARTESIAN_POINT('',(185.625193,-72.365212,1.585)); +#212234 = LINE('',#212235,#212236); +#212235 = CARTESIAN_POINT('',(185.375162,-72.363098,1.585)); +#212236 = VECTOR('',#212237,1.); +#212237 = DIRECTION('',(0.999964258813,-8.454649396022E-03,0.)); +#212238 = ORIENTED_EDGE('',*,*,#212239,.T.); +#212239 = EDGE_CURVE('',#212232,#212240,#212242,.T.); +#212240 = VERTEX_POINT('',#212241); +#212241 = CARTESIAN_POINT('',(185.652927,-72.374711,1.585)); +#212242 = LINE('',#212243,#212244); +#212243 = CARTESIAN_POINT('',(185.625193,-72.365212,1.585)); +#212244 = VECTOR('',#212245,1.); +#212245 = DIRECTION('',(0.946048457417,-0.324025178373,0.)); +#212246 = ORIENTED_EDGE('',*,*,#212247,.T.); +#212247 = EDGE_CURVE('',#212240,#212248,#212250,.T.); +#212248 = VERTEX_POINT('',#212249); +#212249 = CARTESIAN_POINT('',(185.825457,-72.464582,1.585)); +#212250 = LINE('',#212251,#212252); +#212251 = CARTESIAN_POINT('',(185.652927,-72.374711,1.585)); +#212252 = VECTOR('',#212253,1.); +#212253 = DIRECTION('',(0.886889600195,-0.461981425022,0.)); +#212254 = ORIENTED_EDGE('',*,*,#212255,.T.); +#212255 = EDGE_CURVE('',#212248,#212256,#212258,.T.); +#212256 = VERTEX_POINT('',#212257); +#212257 = CARTESIAN_POINT('',(185.924877,-72.56705,1.585)); +#212258 = LINE('',#212259,#212260); +#212259 = CARTESIAN_POINT('',(185.825457,-72.464582,1.585)); +#212260 = VECTOR('',#212261,1.); +#212261 = DIRECTION('',(0.696351894269,-0.717700522048,0.)); +#212262 = ORIENTED_EDGE('',*,*,#212263,.T.); +#212263 = EDGE_CURVE('',#212256,#212264,#212266,.T.); +#212264 = VERTEX_POINT('',#212265); +#212265 = CARTESIAN_POINT('',(186.014588,-72.748807,1.585)); +#212266 = LINE('',#212267,#212268); +#212267 = CARTESIAN_POINT('',(185.924877,-72.56705,1.585)); +#212268 = VECTOR('',#212269,1.); +#212269 = DIRECTION('',(0.44259966274,-0.896719319822,0.)); +#212270 = ORIENTED_EDGE('',*,*,#212271,.T.); +#212271 = EDGE_CURVE('',#212264,#212272,#212274,.T.); +#212272 = VERTEX_POINT('',#212273); +#212273 = CARTESIAN_POINT('',(186.018495,-72.795159,1.585)); +#212274 = LINE('',#212275,#212276); +#212275 = CARTESIAN_POINT('',(186.014588,-72.748807,1.585)); +#212276 = VECTOR('',#212277,1.); +#212277 = DIRECTION('',(8.39919390277E-02,-0.996466434045,0.)); +#212278 = ORIENTED_EDGE('',*,*,#212279,.T.); +#212279 = EDGE_CURVE('',#212272,#212280,#212282,.T.); +#212280 = VERTEX_POINT('',#212281); +#212281 = CARTESIAN_POINT('',(186.626112,-72.372408,1.585)); +#212282 = LINE('',#212283,#212284); +#212283 = CARTESIAN_POINT('',(186.018495,-72.795159,1.585)); +#212284 = VECTOR('',#212285,1.); +#212285 = DIRECTION('',(0.820866622673,0.571119941677,0.)); +#212286 = ORIENTED_EDGE('',*,*,#212287,.T.); +#212287 = EDGE_CURVE('',#212280,#212288,#212290,.T.); +#212288 = VERTEX_POINT('',#212289); +#212289 = CARTESIAN_POINT('',(186.749849,-72.549175,1.585)); +#212290 = CIRCLE('',#212291,0.109999480258); +#212291 = AXIS2_PLACEMENT_3D('',#212292,#212293,#212294); +#212292 = CARTESIAN_POINT('',(186.67039979352,-72.47309800447,1.585)); +#212293 = DIRECTION('',(0.,0.,-1.)); +#212294 = DIRECTION('',(-0.402618207135,0.915368002108,0.)); +#212295 = ORIENTED_EDGE('',*,*,#212296,.T.); +#212296 = EDGE_CURVE('',#212288,#212297,#212299,.T.); +#212297 = VERTEX_POINT('',#212298); +#212298 = CARTESIAN_POINT('',(186.018495,-73.063703,1.585)); +#212299 = LINE('',#212300,#212301); +#212300 = CARTESIAN_POINT('',(186.749849,-72.549175,1.585)); +#212301 = VECTOR('',#212302,1.); +#212302 = DIRECTION('',(-0.817874055485,-0.575397279594,0.)); +#212303 = ORIENTED_EDGE('',*,*,#212304,.T.); +#212304 = EDGE_CURVE('',#212297,#212305,#212307,.T.); +#212305 = VERTEX_POINT('',#212306); +#212306 = CARTESIAN_POINT('',(186.018495,-73.277384,1.585)); +#212307 = LINE('',#212308,#212309); +#212308 = CARTESIAN_POINT('',(186.018495,-73.063703,1.585)); +#212309 = VECTOR('',#212310,1.); +#212310 = DIRECTION('',(0.,-1.,0.)); +#212311 = ORIENTED_EDGE('',*,*,#212312,.T.); +#212312 = EDGE_CURVE('',#212305,#212313,#212315,.T.); +#212313 = VERTEX_POINT('',#212314); +#212314 = CARTESIAN_POINT('',(186.69186,-73.279498,1.585)); +#212315 = LINE('',#212316,#212317); +#212316 = CARTESIAN_POINT('',(186.018495,-73.277384,1.585)); +#212317 = VECTOR('',#212318,1.); +#212318 = DIRECTION('',(0.999995071943,-3.139440841289E-03,0.)); +#212319 = ORIENTED_EDGE('',*,*,#212320,.T.); +#212320 = EDGE_CURVE('',#212313,#212321,#212323,.T.); +#212321 = VERTEX_POINT('',#212322); +#212322 = CARTESIAN_POINT('',(186.69186,-73.49527,1.585)); +#212323 = CIRCLE('',#212324,0.109999639072); +#212324 = AXIS2_PLACEMENT_3D('',#212325,#212326,#212327); +#212325 = CARTESIAN_POINT('',(186.6704,-73.387384,1.585)); +#212326 = DIRECTION('',(0.,0.,-1.)); +#212327 = DIRECTION('',(0.195091549218,0.980785036297,0.)); +#212328 = ORIENTED_EDGE('',*,*,#212329,.T.); +#212329 = EDGE_CURVE('',#212321,#212330,#212332,.T.); +#212330 = VERTEX_POINT('',#212331); +#212331 = CARTESIAN_POINT('',(185.04894,-73.49527,1.585)); +#212332 = LINE('',#212333,#212334); +#212333 = CARTESIAN_POINT('',(186.69186,-73.49527,1.585)); +#212334 = VECTOR('',#212335,1.); +#212335 = DIRECTION('',(-1.,0.,0.)); +#212336 = ORIENTED_EDGE('',*,*,#212337,.T.); +#212337 = EDGE_CURVE('',#212330,#212338,#212340,.T.); +#212338 = VERTEX_POINT('',#212339); +#212339 = CARTESIAN_POINT('',(184.962514,-73.408844,1.585)); +#212340 = CIRCLE('',#212341,0.109995194153); +#212341 = AXIS2_PLACEMENT_3D('',#212342,#212343,#212344); +#212342 = CARTESIAN_POINT('',(185.07039621987,-73.38738778012,1.585)); +#212343 = DIRECTION('',(0.,0.,-1.)); +#212344 = DIRECTION('',(-0.195065066626,-0.980790303675,-0.)); +#212345 = ORIENTED_EDGE('',*,*,#212346,.T.); +#212346 = EDGE_CURVE('',#212338,#212347,#212349,.T.); +#212347 = VERTEX_POINT('',#212348); +#212348 = CARTESIAN_POINT('',(184.962514,-72.7564,1.585)); +#212349 = LINE('',#212350,#212351); +#212350 = CARTESIAN_POINT('',(184.962514,-73.408844,1.585)); +#212351 = VECTOR('',#212352,1.); +#212352 = DIRECTION('',(0.,1.,0.)); +#212353 = ORIENTED_EDGE('',*,*,#212354,.T.); +#212354 = EDGE_CURVE('',#212347,#212355,#212357,.T.); +#212355 = VERTEX_POINT('',#212356); +#212356 = CARTESIAN_POINT('',(184.972013,-72.728667,1.585)); +#212357 = LINE('',#212358,#212359); +#212358 = CARTESIAN_POINT('',(184.962514,-72.7564,1.585)); +#212359 = VECTOR('',#212360,1.); +#212360 = DIRECTION('',(0.324035635352,0.946044875797,0.)); +#212361 = ORIENTED_EDGE('',*,*,#212362,.T.); +#212362 = EDGE_CURVE('',#212355,#212363,#212365,.T.); +#212363 = VERTEX_POINT('',#212364); +#212364 = CARTESIAN_POINT('',(185.061884,-72.556134,1.585)); +#212365 = LINE('',#212366,#212367); +#212366 = CARTESIAN_POINT('',(184.972013,-72.728667,1.585)); +#212367 = VECTOR('',#212368,1.); +#212368 = DIRECTION('',(0.461975106506,0.886892891486,0.)); +#212369 = ORIENTED_EDGE('',*,*,#212370,.T.); +#212370 = EDGE_CURVE('',#212363,#212214,#212371,.T.); +#212371 = LINE('',#212372,#212373); +#212372 = CARTESIAN_POINT('',(185.061884,-72.556134,1.585)); +#212373 = VECTOR('',#212374,1.); +#212374 = DIRECTION('',(0.717700626174,0.696351786951,0.)); +#212375 = FACE_BOUND('',#212376,.F.); +#212376 = EDGE_LOOP('',(#212377,#212388,#212396,#212404,#212412,#212420, + #212428,#212436)); +#212377 = ORIENTED_EDGE('',*,*,#212378,.T.); +#212378 = EDGE_CURVE('',#212379,#212381,#212383,.T.); +#212379 = VERTEX_POINT('',#212380); +#212380 = CARTESIAN_POINT('',(185.690955,-72.639693,1.585)); +#212381 = VERTEX_POINT('',#212382); +#212382 = CARTESIAN_POINT('',(185.287938,-72.639693,1.585)); +#212383 = CIRCLE('',#212384,0.330157797413); +#212384 = AXIS2_PLACEMENT_3D('',#212385,#212386,#212387); +#212385 = CARTESIAN_POINT('',(185.4894465,-72.90122406052,1.585)); +#212386 = DIRECTION('',(0.,0.,1.)); +#212387 = DIRECTION('',(0.610339969491,0.792139584696,-0.)); +#212388 = ORIENTED_EDGE('',*,*,#212389,.T.); +#212389 = EDGE_CURVE('',#212381,#212390,#212392,.T.); +#212390 = VERTEX_POINT('',#212391); +#212391 = CARTESIAN_POINT('',(185.236993,-72.690638,1.585)); +#212392 = LINE('',#212393,#212394); +#212393 = CARTESIAN_POINT('',(185.287938,-72.639693,1.585)); +#212394 = VECTOR('',#212395,1.); +#212395 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#212396 = ORIENTED_EDGE('',*,*,#212397,.T.); +#212397 = EDGE_CURVE('',#212390,#212398,#212400,.T.); +#212398 = VERTEX_POINT('',#212399); +#212399 = CARTESIAN_POINT('',(185.1804,-72.803826,1.585)); +#212400 = LINE('',#212401,#212402); +#212401 = CARTESIAN_POINT('',(185.236993,-72.690638,1.585)); +#212402 = VECTOR('',#212403,1.); +#212403 = DIRECTION('',(-0.447207273756,-0.894430351844,0.)); +#212404 = ORIENTED_EDGE('',*,*,#212405,.T.); +#212405 = EDGE_CURVE('',#212398,#212406,#212408,.T.); +#212406 = VERTEX_POINT('',#212407); +#212407 = CARTESIAN_POINT('',(185.1804,-73.277384,1.585)); +#212408 = LINE('',#212409,#212410); +#212409 = CARTESIAN_POINT('',(185.1804,-72.803826,1.585)); +#212410 = VECTOR('',#212411,1.); +#212411 = DIRECTION('',(0.,-1.,0.)); +#212412 = ORIENTED_EDGE('',*,*,#212413,.T.); +#212413 = EDGE_CURVE('',#212406,#212414,#212416,.T.); +#212414 = VERTEX_POINT('',#212415); +#212415 = CARTESIAN_POINT('',(185.798495,-73.277384,1.585)); +#212416 = LINE('',#212417,#212418); +#212417 = CARTESIAN_POINT('',(185.1804,-73.277384,1.585)); +#212418 = VECTOR('',#212419,1.); +#212419 = DIRECTION('',(1.,0.,0.)); +#212420 = ORIENTED_EDGE('',*,*,#212421,.T.); +#212421 = EDGE_CURVE('',#212414,#212422,#212424,.T.); +#212422 = VERTEX_POINT('',#212423); +#212423 = CARTESIAN_POINT('',(185.798495,-72.803826,1.585)); +#212424 = LINE('',#212425,#212426); +#212425 = CARTESIAN_POINT('',(185.798495,-73.277384,1.585)); +#212426 = VECTOR('',#212427,1.); +#212427 = DIRECTION('',(0.,1.,0.)); +#212428 = ORIENTED_EDGE('',*,*,#212429,.T.); +#212429 = EDGE_CURVE('',#212422,#212430,#212432,.T.); +#212430 = VERTEX_POINT('',#212431); +#212431 = CARTESIAN_POINT('',(185.741901,-72.690639,1.585)); +#212432 = LINE('',#212433,#212434); +#212433 = CARTESIAN_POINT('',(185.798495,-72.803826,1.585)); +#212434 = VECTOR('',#212435,1.); +#212435 = DIRECTION('',(-0.447216756375,0.894425610556,0.)); +#212436 = ORIENTED_EDGE('',*,*,#212437,.T.); +#212437 = EDGE_CURVE('',#212430,#212379,#212438,.T.); +#212438 = LINE('',#212439,#212440); +#212439 = CARTESIAN_POINT('',(185.741901,-72.690639,1.585)); +#212440 = VECTOR('',#212441,1.); +#212441 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#212442 = PLANE('',#212443); +#212443 = AXIS2_PLACEMENT_3D('',#212444,#212445,#212446); +#212444 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212445 = DIRECTION('',(0.,0.,1.)); +#212446 = DIRECTION('',(1.,0.,-0.)); +#212447 = SHELL_BASED_SURFACE_MODEL('',(#212448)); +#212448 = OPEN_SHELL('',(#212449)); +#212449 = ADVANCED_FACE('',(#212450,#212520,#212704,#212788,#212822, + #212856),#212890,.T.); +#212450 = FACE_BOUND('',#212451,.F.); +#212451 = EDGE_LOOP('',(#212452,#212463,#212471,#212480,#212488,#212497, + #212505,#212514)); +#212452 = ORIENTED_EDGE('',*,*,#212453,.T.); +#212453 = EDGE_CURVE('',#212454,#212456,#212458,.T.); +#212454 = VERTEX_POINT('',#212455); +#212455 = CARTESIAN_POINT('',(207.64665,-65.7631,1.585)); +#212456 = VERTEX_POINT('',#212457); +#212457 = CARTESIAN_POINT('',(207.70665,-65.7031,1.585)); +#212458 = CIRCLE('',#212459,5.999932016262E-02); +#212459 = AXIS2_PLACEMENT_3D('',#212460,#212461,#212462); +#212460 = CARTESIAN_POINT('',(207.70664932015,-65.76309932015,1.585)); +#212461 = DIRECTION('',(0.,0.,-1.)); +#212462 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#212463 = ORIENTED_EDGE('',*,*,#212464,.T.); +#212464 = EDGE_CURVE('',#212456,#212465,#212467,.T.); +#212465 = VERTEX_POINT('',#212466); +#212466 = CARTESIAN_POINT('',(213.67665,-65.7031,1.585)); +#212467 = LINE('',#212468,#212469); +#212468 = CARTESIAN_POINT('',(207.70665,-65.7031,1.585)); +#212469 = VECTOR('',#212470,1.); +#212470 = DIRECTION('',(1.,0.,0.)); +#212471 = ORIENTED_EDGE('',*,*,#212472,.T.); +#212472 = EDGE_CURVE('',#212465,#212473,#212475,.T.); +#212473 = VERTEX_POINT('',#212474); +#212474 = CARTESIAN_POINT('',(213.73665,-65.7631,1.585)); +#212475 = CIRCLE('',#212476,5.999932016257E-02); +#212476 = AXIS2_PLACEMENT_3D('',#212477,#212478,#212479); +#212477 = CARTESIAN_POINT('',(213.67665067984,-65.76309932015,1.585)); +#212478 = DIRECTION('',(0.,0.,-1.)); +#212479 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#212480 = ORIENTED_EDGE('',*,*,#212481,.T.); +#212481 = EDGE_CURVE('',#212473,#212482,#212484,.T.); +#212482 = VERTEX_POINT('',#212483); +#212483 = CARTESIAN_POINT('',(213.73665,-73.3831,1.585)); +#212484 = LINE('',#212485,#212486); +#212485 = CARTESIAN_POINT('',(213.73665,-65.7631,1.585)); +#212486 = VECTOR('',#212487,1.); +#212487 = DIRECTION('',(0.,-1.,0.)); +#212488 = ORIENTED_EDGE('',*,*,#212489,.T.); +#212489 = EDGE_CURVE('',#212482,#212490,#212492,.T.); +#212490 = VERTEX_POINT('',#212491); +#212491 = CARTESIAN_POINT('',(213.67665,-73.4431,1.585)); +#212492 = CIRCLE('',#212493,5.999932016265E-02); +#212493 = AXIS2_PLACEMENT_3D('',#212494,#212495,#212496); +#212494 = CARTESIAN_POINT('',(213.67665067984,-73.38310067984,1.585)); +#212495 = DIRECTION('',(0.,0.,-1.)); +#212496 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#212497 = ORIENTED_EDGE('',*,*,#212498,.T.); +#212498 = EDGE_CURVE('',#212490,#212499,#212501,.T.); +#212499 = VERTEX_POINT('',#212500); +#212500 = CARTESIAN_POINT('',(207.70665,-73.4431,1.585)); +#212501 = LINE('',#212502,#212503); +#212502 = CARTESIAN_POINT('',(213.67665,-73.4431,1.585)); +#212503 = VECTOR('',#212504,1.); +#212504 = DIRECTION('',(-1.,0.,0.)); +#212505 = ORIENTED_EDGE('',*,*,#212506,.T.); +#212506 = EDGE_CURVE('',#212499,#212507,#212509,.T.); +#212507 = VERTEX_POINT('',#212508); +#212508 = CARTESIAN_POINT('',(207.64665,-73.3831,1.585)); +#212509 = CIRCLE('',#212510,5.999932016256E-02); +#212510 = AXIS2_PLACEMENT_3D('',#212511,#212512,#212513); +#212511 = CARTESIAN_POINT('',(207.70664932015,-73.38310067984,1.585)); +#212512 = DIRECTION('',(0.,0.,-1.)); +#212513 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#212514 = ORIENTED_EDGE('',*,*,#212515,.T.); +#212515 = EDGE_CURVE('',#212507,#212454,#212516,.T.); +#212516 = LINE('',#212517,#212518); +#212517 = CARTESIAN_POINT('',(207.64665,-73.3831,1.585)); +#212518 = VECTOR('',#212519,1.); +#212519 = DIRECTION('',(0.,1.,0.)); +#212520 = FACE_BOUND('',#212521,.F.); +#212521 = EDGE_LOOP('',(#212522,#212533,#212541,#212549,#212557,#212566, + #212574,#212582,#212590,#212599,#212607,#212616,#212624,#212632, + #212640,#212649,#212657,#212665,#212673,#212682,#212690,#212698)); +#212522 = ORIENTED_EDGE('',*,*,#212523,.T.); +#212523 = EDGE_CURVE('',#212524,#212526,#212528,.T.); +#212524 = VERTEX_POINT('',#212525); +#212525 = CARTESIAN_POINT('',(209.96665,-66.5831,1.585)); +#212526 = VERTEX_POINT('',#212527); +#212527 = CARTESIAN_POINT('',(209.90665,-66.5231,1.585)); +#212528 = CIRCLE('',#212529,5.999932016264E-02); +#212529 = AXIS2_PLACEMENT_3D('',#212530,#212531,#212532); +#212530 = CARTESIAN_POINT('',(209.96664932015,-66.52310067984,1.585)); +#212531 = DIRECTION('',(0.,0.,-1.)); +#212532 = DIRECTION('',(1.133081470032E-05,-0.999999999936,0.)); +#212533 = ORIENTED_EDGE('',*,*,#212534,.T.); +#212534 = EDGE_CURVE('',#212526,#212535,#212537,.T.); +#212535 = VERTEX_POINT('',#212536); +#212536 = CARTESIAN_POINT('',(209.90665,-65.8231,1.585)); +#212537 = LINE('',#212538,#212539); +#212538 = CARTESIAN_POINT('',(209.90665,-66.5231,1.585)); +#212539 = VECTOR('',#212540,1.); +#212540 = DIRECTION('',(0.,1.,0.)); +#212541 = ORIENTED_EDGE('',*,*,#212542,.T.); +#212542 = EDGE_CURVE('',#212535,#212543,#212545,.T.); +#212543 = VERTEX_POINT('',#212544); +#212544 = CARTESIAN_POINT('',(208.52665,-65.8231,1.585)); +#212545 = LINE('',#212546,#212547); +#212546 = CARTESIAN_POINT('',(209.90665,-65.8231,1.585)); +#212547 = VECTOR('',#212548,1.); +#212548 = DIRECTION('',(-1.,0.,0.)); +#212549 = ORIENTED_EDGE('',*,*,#212550,.T.); +#212550 = EDGE_CURVE('',#212543,#212551,#212553,.T.); +#212551 = VERTEX_POINT('',#212552); +#212552 = CARTESIAN_POINT('',(208.52665,-67.5731,1.585)); +#212553 = LINE('',#212554,#212555); +#212554 = CARTESIAN_POINT('',(208.52665,-65.8231,1.585)); +#212555 = VECTOR('',#212556,1.); +#212556 = DIRECTION('',(0.,-1.,0.)); +#212557 = ORIENTED_EDGE('',*,*,#212558,.T.); +#212558 = EDGE_CURVE('',#212551,#212559,#212561,.T.); +#212559 = VERTEX_POINT('',#212560); +#212560 = CARTESIAN_POINT('',(208.46665,-67.6331,1.585)); +#212561 = CIRCLE('',#212562,5.999932016251E-02); +#212562 = AXIS2_PLACEMENT_3D('',#212563,#212564,#212565); +#212563 = CARTESIAN_POINT('',(208.46665067984,-67.57310067984,1.585)); +#212564 = DIRECTION('',(0.,0.,-1.)); +#212565 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#212566 = ORIENTED_EDGE('',*,*,#212567,.T.); +#212567 = EDGE_CURVE('',#212559,#212568,#212570,.T.); +#212568 = VERTEX_POINT('',#212569); +#212569 = CARTESIAN_POINT('',(207.76665,-67.6331,1.585)); +#212570 = LINE('',#212571,#212572); +#212571 = CARTESIAN_POINT('',(208.46665,-67.6331,1.585)); +#212572 = VECTOR('',#212573,1.); +#212573 = DIRECTION('',(-1.,0.,0.)); +#212574 = ORIENTED_EDGE('',*,*,#212575,.T.); +#212575 = EDGE_CURVE('',#212568,#212576,#212578,.T.); +#212576 = VERTEX_POINT('',#212577); +#212577 = CARTESIAN_POINT('',(207.76665,-69.0131,1.585)); +#212578 = LINE('',#212579,#212580); +#212579 = CARTESIAN_POINT('',(207.76665,-67.6331,1.585)); +#212580 = VECTOR('',#212581,1.); +#212581 = DIRECTION('',(0.,-1.,0.)); +#212582 = ORIENTED_EDGE('',*,*,#212583,.T.); +#212583 = EDGE_CURVE('',#212576,#212584,#212586,.T.); +#212584 = VERTEX_POINT('',#212585); +#212585 = CARTESIAN_POINT('',(208.46665,-69.0131,1.585)); +#212586 = LINE('',#212587,#212588); +#212587 = CARTESIAN_POINT('',(207.76665,-69.0131,1.585)); +#212588 = VECTOR('',#212589,1.); +#212589 = DIRECTION('',(1.,0.,0.)); +#212590 = ORIENTED_EDGE('',*,*,#212591,.T.); +#212591 = EDGE_CURVE('',#212584,#212592,#212594,.T.); +#212592 = VERTEX_POINT('',#212593); +#212593 = CARTESIAN_POINT('',(208.52665,-69.0731,1.585)); +#212594 = CIRCLE('',#212595,5.999932016262E-02); +#212595 = AXIS2_PLACEMENT_3D('',#212596,#212597,#212598); +#212596 = CARTESIAN_POINT('',(208.46665067984,-69.07309932015,1.585)); +#212597 = DIRECTION('',(0.,0.,-1.)); +#212598 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#212599 = ORIENTED_EDGE('',*,*,#212600,.T.); +#212600 = EDGE_CURVE('',#212592,#212601,#212603,.T.); +#212601 = VERTEX_POINT('',#212602); +#212602 = CARTESIAN_POINT('',(208.52665,-70.0731,1.585)); +#212603 = LINE('',#212604,#212605); +#212604 = CARTESIAN_POINT('',(208.52665,-69.0731,1.585)); +#212605 = VECTOR('',#212606,1.); +#212606 = DIRECTION('',(0.,-1.,0.)); +#212607 = ORIENTED_EDGE('',*,*,#212608,.T.); +#212608 = EDGE_CURVE('',#212601,#212609,#212611,.T.); +#212609 = VERTEX_POINT('',#212610); +#212610 = CARTESIAN_POINT('',(208.46665,-70.1331,1.585)); +#212611 = CIRCLE('',#212612,5.999932016251E-02); +#212612 = AXIS2_PLACEMENT_3D('',#212613,#212614,#212615); +#212613 = CARTESIAN_POINT('',(208.46665067984,-70.07310067984,1.585)); +#212614 = DIRECTION('',(0.,0.,-1.)); +#212615 = DIRECTION('',(0.999999999936,1.133081730569E-05,0.)); +#212616 = ORIENTED_EDGE('',*,*,#212617,.T.); +#212617 = EDGE_CURVE('',#212609,#212618,#212620,.T.); +#212618 = VERTEX_POINT('',#212619); +#212619 = CARTESIAN_POINT('',(207.76665,-70.1331,1.585)); +#212620 = LINE('',#212621,#212622); +#212621 = CARTESIAN_POINT('',(208.46665,-70.1331,1.585)); +#212622 = VECTOR('',#212623,1.); +#212623 = DIRECTION('',(-1.,0.,0.)); +#212624 = ORIENTED_EDGE('',*,*,#212625,.T.); +#212625 = EDGE_CURVE('',#212618,#212626,#212628,.T.); +#212626 = VERTEX_POINT('',#212627); +#212627 = CARTESIAN_POINT('',(207.76665,-71.5131,1.585)); +#212628 = LINE('',#212629,#212630); +#212629 = CARTESIAN_POINT('',(207.76665,-70.1331,1.585)); +#212630 = VECTOR('',#212631,1.); +#212631 = DIRECTION('',(0.,-1.,0.)); +#212632 = ORIENTED_EDGE('',*,*,#212633,.T.); +#212633 = EDGE_CURVE('',#212626,#212634,#212636,.T.); +#212634 = VERTEX_POINT('',#212635); +#212635 = CARTESIAN_POINT('',(208.46665,-71.5131,1.585)); +#212636 = LINE('',#212637,#212638); +#212637 = CARTESIAN_POINT('',(207.76665,-71.5131,1.585)); +#212638 = VECTOR('',#212639,1.); +#212639 = DIRECTION('',(1.,0.,0.)); +#212640 = ORIENTED_EDGE('',*,*,#212641,.T.); +#212641 = EDGE_CURVE('',#212634,#212642,#212644,.T.); +#212642 = VERTEX_POINT('',#212643); +#212643 = CARTESIAN_POINT('',(208.52665,-71.5731,1.585)); +#212644 = CIRCLE('',#212645,5.999932016262E-02); +#212645 = AXIS2_PLACEMENT_3D('',#212646,#212647,#212648); +#212646 = CARTESIAN_POINT('',(208.46665067984,-71.57309932015,1.585)); +#212647 = DIRECTION('',(0.,0.,-1.)); +#212648 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#212649 = ORIENTED_EDGE('',*,*,#212650,.T.); +#212650 = EDGE_CURVE('',#212642,#212651,#212653,.T.); +#212651 = VERTEX_POINT('',#212652); +#212652 = CARTESIAN_POINT('',(208.52665,-73.3231,1.585)); +#212653 = LINE('',#212654,#212655); +#212654 = CARTESIAN_POINT('',(208.52665,-71.5731,1.585)); +#212655 = VECTOR('',#212656,1.); +#212656 = DIRECTION('',(0.,-1.,0.)); +#212657 = ORIENTED_EDGE('',*,*,#212658,.T.); +#212658 = EDGE_CURVE('',#212651,#212659,#212661,.T.); +#212659 = VERTEX_POINT('',#212660); +#212660 = CARTESIAN_POINT('',(209.90665,-73.3231,1.585)); +#212661 = LINE('',#212662,#212663); +#212662 = CARTESIAN_POINT('',(208.52665,-73.3231,1.585)); +#212663 = VECTOR('',#212664,1.); +#212664 = DIRECTION('',(1.,0.,0.)); +#212665 = ORIENTED_EDGE('',*,*,#212666,.T.); +#212666 = EDGE_CURVE('',#212659,#212667,#212669,.T.); +#212667 = VERTEX_POINT('',#212668); +#212668 = CARTESIAN_POINT('',(209.90665,-72.6231,1.585)); +#212669 = LINE('',#212670,#212671); +#212670 = CARTESIAN_POINT('',(209.90665,-73.3231,1.585)); +#212671 = VECTOR('',#212672,1.); +#212672 = DIRECTION('',(0.,1.,0.)); +#212673 = ORIENTED_EDGE('',*,*,#212674,.T.); +#212674 = EDGE_CURVE('',#212667,#212675,#212677,.T.); +#212675 = VERTEX_POINT('',#212676); +#212676 = CARTESIAN_POINT('',(209.96665,-72.5631,1.585)); +#212677 = CIRCLE('',#212678,5.999932016253E-02); +#212678 = AXIS2_PLACEMENT_3D('',#212679,#212680,#212681); +#212679 = CARTESIAN_POINT('',(209.96664932015,-72.62309932015,1.585)); +#212680 = DIRECTION('',(0.,0.,-1.)); +#212681 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#212682 = ORIENTED_EDGE('',*,*,#212683,.T.); +#212683 = EDGE_CURVE('',#212675,#212684,#212686,.T.); +#212684 = VERTEX_POINT('',#212685); +#212685 = CARTESIAN_POINT('',(212.85665,-72.5631,1.585)); +#212686 = LINE('',#212687,#212688); +#212687 = CARTESIAN_POINT('',(209.96665,-72.5631,1.585)); +#212688 = VECTOR('',#212689,1.); +#212689 = DIRECTION('',(1.,0.,0.)); +#212690 = ORIENTED_EDGE('',*,*,#212691,.T.); +#212691 = EDGE_CURVE('',#212684,#212692,#212694,.T.); +#212692 = VERTEX_POINT('',#212693); +#212693 = CARTESIAN_POINT('',(212.85665,-66.5831,1.585)); +#212694 = LINE('',#212695,#212696); +#212695 = CARTESIAN_POINT('',(212.85665,-72.5631,1.585)); +#212696 = VECTOR('',#212697,1.); +#212697 = DIRECTION('',(0.,1.,0.)); +#212698 = ORIENTED_EDGE('',*,*,#212699,.T.); +#212699 = EDGE_CURVE('',#212692,#212524,#212700,.T.); +#212700 = LINE('',#212701,#212702); +#212701 = CARTESIAN_POINT('',(212.85665,-66.5831,1.585)); +#212702 = VECTOR('',#212703,1.); +#212703 = DIRECTION('',(-1.,0.,0.)); +#212704 = FACE_BOUND('',#212705,.F.); +#212705 = EDGE_LOOP('',(#212706,#212716,#212724,#212732,#212740,#212749, + #212757,#212766,#212774,#212782)); +#212706 = ORIENTED_EDGE('',*,*,#212707,.T.); +#212707 = EDGE_CURVE('',#212708,#212710,#212712,.T.); +#212708 = VERTEX_POINT('',#212709); +#212709 = CARTESIAN_POINT('',(213.61665,-73.3231,1.585)); +#212710 = VERTEX_POINT('',#212711); +#212711 = CARTESIAN_POINT('',(213.61665,-65.8231,1.585)); +#212712 = LINE('',#212713,#212714); +#212713 = CARTESIAN_POINT('',(213.61665,-73.3231,1.585)); +#212714 = VECTOR('',#212715,1.); +#212715 = DIRECTION('',(0.,1.,0.)); +#212716 = ORIENTED_EDGE('',*,*,#212717,.T.); +#212717 = EDGE_CURVE('',#212710,#212718,#212720,.T.); +#212718 = VERTEX_POINT('',#212719); +#212719 = CARTESIAN_POINT('',(210.02665,-65.8231,1.585)); +#212720 = LINE('',#212721,#212722); +#212721 = CARTESIAN_POINT('',(213.61665,-65.8231,1.585)); +#212722 = VECTOR('',#212723,1.); +#212723 = DIRECTION('',(-1.,0.,0.)); +#212724 = ORIENTED_EDGE('',*,*,#212725,.T.); +#212725 = EDGE_CURVE('',#212718,#212726,#212728,.T.); +#212726 = VERTEX_POINT('',#212727); +#212727 = CARTESIAN_POINT('',(210.02665,-66.4631,1.585)); +#212728 = LINE('',#212729,#212730); +#212729 = CARTESIAN_POINT('',(210.02665,-65.8231,1.585)); +#212730 = VECTOR('',#212731,1.); +#212731 = DIRECTION('',(0.,-1.,0.)); +#212732 = ORIENTED_EDGE('',*,*,#212733,.T.); +#212733 = EDGE_CURVE('',#212726,#212734,#212736,.T.); +#212734 = VERTEX_POINT('',#212735); +#212735 = CARTESIAN_POINT('',(212.91665,-66.4631,1.585)); +#212736 = LINE('',#212737,#212738); +#212737 = CARTESIAN_POINT('',(210.02665,-66.4631,1.585)); +#212738 = VECTOR('',#212739,1.); +#212739 = DIRECTION('',(1.,0.,0.)); +#212740 = ORIENTED_EDGE('',*,*,#212741,.T.); +#212741 = EDGE_CURVE('',#212734,#212742,#212744,.T.); +#212742 = VERTEX_POINT('',#212743); +#212743 = CARTESIAN_POINT('',(212.97665,-66.5231,1.585)); +#212744 = CIRCLE('',#212745,5.999932016262E-02); +#212745 = AXIS2_PLACEMENT_3D('',#212746,#212747,#212748); +#212746 = CARTESIAN_POINT('',(212.91665067984,-66.52309932015,1.585)); +#212747 = DIRECTION('',(0.,0.,-1.)); +#212748 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#212749 = ORIENTED_EDGE('',*,*,#212750,.T.); +#212750 = EDGE_CURVE('',#212742,#212751,#212753,.T.); +#212751 = VERTEX_POINT('',#212752); +#212752 = CARTESIAN_POINT('',(212.97665,-72.6231,1.585)); +#212753 = LINE('',#212754,#212755); +#212754 = CARTESIAN_POINT('',(212.97665,-66.5231,1.585)); +#212755 = VECTOR('',#212756,1.); +#212756 = DIRECTION('',(0.,-1.,0.)); +#212757 = ORIENTED_EDGE('',*,*,#212758,.T.); +#212758 = EDGE_CURVE('',#212751,#212759,#212761,.T.); +#212759 = VERTEX_POINT('',#212760); +#212760 = CARTESIAN_POINT('',(212.91665,-72.6831,1.585)); +#212761 = CIRCLE('',#212762,5.999932016262E-02); +#212762 = AXIS2_PLACEMENT_3D('',#212763,#212764,#212765); +#212763 = CARTESIAN_POINT('',(212.91665067984,-72.62310067984,1.585)); +#212764 = DIRECTION('',(0.,0.,-1.)); +#212765 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#212766 = ORIENTED_EDGE('',*,*,#212767,.T.); +#212767 = EDGE_CURVE('',#212759,#212768,#212770,.T.); +#212768 = VERTEX_POINT('',#212769); +#212769 = CARTESIAN_POINT('',(210.02665,-72.6831,1.585)); +#212770 = LINE('',#212771,#212772); +#212771 = CARTESIAN_POINT('',(212.91665,-72.6831,1.585)); +#212772 = VECTOR('',#212773,1.); +#212773 = DIRECTION('',(-1.,0.,0.)); +#212774 = ORIENTED_EDGE('',*,*,#212775,.T.); +#212775 = EDGE_CURVE('',#212768,#212776,#212778,.T.); +#212776 = VERTEX_POINT('',#212777); +#212777 = CARTESIAN_POINT('',(210.02665,-73.3231,1.585)); +#212778 = LINE('',#212779,#212780); +#212779 = CARTESIAN_POINT('',(210.02665,-72.6831,1.585)); +#212780 = VECTOR('',#212781,1.); +#212781 = DIRECTION('',(0.,-1.,0.)); +#212782 = ORIENTED_EDGE('',*,*,#212783,.T.); +#212783 = EDGE_CURVE('',#212776,#212708,#212784,.T.); +#212784 = LINE('',#212785,#212786); +#212785 = CARTESIAN_POINT('',(210.02665,-73.3231,1.585)); +#212786 = VECTOR('',#212787,1.); +#212787 = DIRECTION('',(1.,0.,0.)); +#212788 = FACE_BOUND('',#212789,.F.); +#212789 = EDGE_LOOP('',(#212790,#212800,#212808,#212816)); +#212790 = ORIENTED_EDGE('',*,*,#212791,.T.); +#212791 = EDGE_CURVE('',#212792,#212794,#212796,.T.); +#212792 = VERTEX_POINT('',#212793); +#212793 = CARTESIAN_POINT('',(208.40665,-73.3131,1.585)); +#212794 = VERTEX_POINT('',#212795); +#212795 = CARTESIAN_POINT('',(208.40665,-71.6331,1.585)); +#212796 = LINE('',#212797,#212798); +#212797 = CARTESIAN_POINT('',(208.40665,-73.3131,1.585)); +#212798 = VECTOR('',#212799,1.); +#212799 = DIRECTION('',(0.,1.,0.)); +#212800 = ORIENTED_EDGE('',*,*,#212801,.T.); +#212801 = EDGE_CURVE('',#212794,#212802,#212804,.T.); +#212802 = VERTEX_POINT('',#212803); +#212803 = CARTESIAN_POINT('',(207.77665,-71.6331,1.585)); +#212804 = LINE('',#212805,#212806); +#212805 = CARTESIAN_POINT('',(208.40665,-71.6331,1.585)); +#212806 = VECTOR('',#212807,1.); +#212807 = DIRECTION('',(-1.,0.,0.)); +#212808 = ORIENTED_EDGE('',*,*,#212809,.T.); +#212809 = EDGE_CURVE('',#212802,#212810,#212812,.T.); +#212810 = VERTEX_POINT('',#212811); +#212811 = CARTESIAN_POINT('',(207.77665,-73.3131,1.585)); +#212812 = LINE('',#212813,#212814); +#212813 = CARTESIAN_POINT('',(207.77665,-71.6331,1.585)); +#212814 = VECTOR('',#212815,1.); +#212815 = DIRECTION('',(0.,-1.,0.)); +#212816 = ORIENTED_EDGE('',*,*,#212817,.T.); +#212817 = EDGE_CURVE('',#212810,#212792,#212818,.T.); +#212818 = LINE('',#212819,#212820); +#212819 = CARTESIAN_POINT('',(207.77665,-73.3131,1.585)); +#212820 = VECTOR('',#212821,1.); +#212821 = DIRECTION('',(1.,0.,0.)); +#212822 = FACE_BOUND('',#212823,.F.); +#212823 = EDGE_LOOP('',(#212824,#212834,#212842,#212850)); +#212824 = ORIENTED_EDGE('',*,*,#212825,.T.); +#212825 = EDGE_CURVE('',#212826,#212828,#212830,.T.); +#212826 = VERTEX_POINT('',#212827); +#212827 = CARTESIAN_POINT('',(208.40665,-70.0131,1.585)); +#212828 = VERTEX_POINT('',#212829); +#212829 = CARTESIAN_POINT('',(208.40665,-69.1331,1.585)); +#212830 = LINE('',#212831,#212832); +#212831 = CARTESIAN_POINT('',(208.40665,-70.0131,1.585)); +#212832 = VECTOR('',#212833,1.); +#212833 = DIRECTION('',(0.,1.,0.)); +#212834 = ORIENTED_EDGE('',*,*,#212835,.T.); +#212835 = EDGE_CURVE('',#212828,#212836,#212838,.T.); +#212836 = VERTEX_POINT('',#212837); +#212837 = CARTESIAN_POINT('',(207.77665,-69.1331,1.585)); +#212838 = LINE('',#212839,#212840); +#212839 = CARTESIAN_POINT('',(208.40665,-69.1331,1.585)); +#212840 = VECTOR('',#212841,1.); +#212841 = DIRECTION('',(-1.,0.,0.)); +#212842 = ORIENTED_EDGE('',*,*,#212843,.T.); +#212843 = EDGE_CURVE('',#212836,#212844,#212846,.T.); +#212844 = VERTEX_POINT('',#212845); +#212845 = CARTESIAN_POINT('',(207.77665,-70.0131,1.585)); +#212846 = LINE('',#212847,#212848); +#212847 = CARTESIAN_POINT('',(207.77665,-69.1331,1.585)); +#212848 = VECTOR('',#212849,1.); +#212849 = DIRECTION('',(0.,-1.,0.)); +#212850 = ORIENTED_EDGE('',*,*,#212851,.T.); +#212851 = EDGE_CURVE('',#212844,#212826,#212852,.T.); +#212852 = LINE('',#212853,#212854); +#212853 = CARTESIAN_POINT('',(207.77665,-70.0131,1.585)); +#212854 = VECTOR('',#212855,1.); +#212855 = DIRECTION('',(1.,0.,0.)); +#212856 = FACE_BOUND('',#212857,.F.); +#212857 = EDGE_LOOP('',(#212858,#212868,#212876,#212884)); +#212858 = ORIENTED_EDGE('',*,*,#212859,.T.); +#212859 = EDGE_CURVE('',#212860,#212862,#212864,.T.); +#212860 = VERTEX_POINT('',#212861); +#212861 = CARTESIAN_POINT('',(208.40665,-67.5131,1.585)); +#212862 = VERTEX_POINT('',#212863); +#212863 = CARTESIAN_POINT('',(208.40665,-65.8331,1.585)); +#212864 = LINE('',#212865,#212866); +#212865 = CARTESIAN_POINT('',(208.40665,-67.5131,1.585)); +#212866 = VECTOR('',#212867,1.); +#212867 = DIRECTION('',(0.,1.,0.)); +#212868 = ORIENTED_EDGE('',*,*,#212869,.T.); +#212869 = EDGE_CURVE('',#212862,#212870,#212872,.T.); +#212870 = VERTEX_POINT('',#212871); +#212871 = CARTESIAN_POINT('',(207.77665,-65.8331,1.585)); +#212872 = LINE('',#212873,#212874); +#212873 = CARTESIAN_POINT('',(208.40665,-65.8331,1.585)); +#212874 = VECTOR('',#212875,1.); +#212875 = DIRECTION('',(-1.,0.,0.)); +#212876 = ORIENTED_EDGE('',*,*,#212877,.T.); +#212877 = EDGE_CURVE('',#212870,#212878,#212880,.T.); +#212878 = VERTEX_POINT('',#212879); +#212879 = CARTESIAN_POINT('',(207.77665,-67.5131,1.585)); +#212880 = LINE('',#212881,#212882); +#212881 = CARTESIAN_POINT('',(207.77665,-65.8331,1.585)); +#212882 = VECTOR('',#212883,1.); +#212883 = DIRECTION('',(0.,-1.,0.)); +#212884 = ORIENTED_EDGE('',*,*,#212885,.T.); +#212885 = EDGE_CURVE('',#212878,#212860,#212886,.T.); +#212886 = LINE('',#212887,#212888); +#212887 = CARTESIAN_POINT('',(207.77665,-67.5131,1.585)); +#212888 = VECTOR('',#212889,1.); +#212889 = DIRECTION('',(1.,0.,0.)); +#212890 = PLANE('',#212891); +#212891 = AXIS2_PLACEMENT_3D('',#212892,#212893,#212894); +#212892 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212893 = DIRECTION('',(0.,0.,1.)); +#212894 = DIRECTION('',(1.,0.,-0.)); +#212895 = SHELL_BASED_SURFACE_MODEL('',(#212896)); +#212896 = OPEN_SHELL('',(#212897)); +#212897 = ADVANCED_FACE('',(#212898),#212984,.T.); +#212898 = FACE_BOUND('',#212899,.F.); +#212899 = EDGE_LOOP('',(#212900,#212911,#212919,#212928,#212936,#212945, + #212953,#212962,#212970,#212978)); +#212900 = ORIENTED_EDGE('',*,*,#212901,.T.); +#212901 = EDGE_CURVE('',#212902,#212904,#212906,.T.); +#212902 = VERTEX_POINT('',#212903); +#212903 = CARTESIAN_POINT('',(173.816648,-71.715559,1.585)); +#212904 = VERTEX_POINT('',#212905); +#212905 = CARTESIAN_POINT('',(173.933316,-71.777919,1.585)); +#212906 = CIRCLE('',#212907,7.500000000002E-02); +#212907 = AXIS2_PLACEMENT_3D('',#212908,#212909,#212910); +#212908 = CARTESIAN_POINT('',(173.858316,-71.77791906555,1.585)); +#212909 = DIRECTION('',(0.,0.,-1.)); +#212910 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#212911 = ORIENTED_EDGE('',*,*,#212912,.T.); +#212912 = EDGE_CURVE('',#212904,#212913,#212915,.T.); +#212913 = VERTEX_POINT('',#212914); +#212914 = CARTESIAN_POINT('',(173.931116,-72.508666,1.585)); +#212915 = LINE('',#212916,#212917); +#212916 = CARTESIAN_POINT('',(173.933316,-71.777919,1.585)); +#212917 = VECTOR('',#212918,1.); +#212918 = DIRECTION('',(-3.010604258181E-03,-0.999995468121,0.)); +#212919 = ORIENTED_EDGE('',*,*,#212920,.T.); +#212920 = EDGE_CURVE('',#212913,#212921,#212923,.T.); +#212921 = VERTEX_POINT('',#212922); +#212922 = CARTESIAN_POINT('',(173.580007,-72.852189,1.585)); +#212923 = CIRCLE('',#212924,0.38184101318); +#212924 = AXIS2_PLACEMENT_3D('',#212925,#212926,#212927); +#212925 = CARTESIAN_POINT('',(173.55109350032,-72.47144424444,1.585)); +#212926 = DIRECTION('',(0.,0.,-1.)); +#212927 = DIRECTION('',(0.995237511316,-9.747972132603E-02,0.)); +#212928 = ORIENTED_EDGE('',*,*,#212929,.T.); +#212929 = EDGE_CURVE('',#212921,#212930,#212932,.T.); +#212930 = VERTEX_POINT('',#212931); +#212931 = CARTESIAN_POINT('',(173.462732,-72.851478,1.585)); +#212932 = LINE('',#212933,#212934); +#212933 = CARTESIAN_POINT('',(173.580007,-72.852189,1.585)); +#212934 = VECTOR('',#212935,1.); +#212935 = DIRECTION('',(-0.999981622503,6.062561787213E-03,0.)); +#212936 = ORIENTED_EDGE('',*,*,#212937,.T.); +#212937 = EDGE_CURVE('',#212930,#212938,#212940,.T.); +#212938 = VERTEX_POINT('',#212939); +#212939 = CARTESIAN_POINT('',(173.477364,-72.702919,1.585)); +#212940 = CIRCLE('',#212941,7.500006711464E-02); +#212941 = AXIS2_PLACEMENT_3D('',#212942,#212943,#212944); +#212942 = CARTESIAN_POINT('',(173.47736393288,-72.77791906711,1.585)); +#212943 = DIRECTION('',(0.,0.,-1.)); +#212944 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#212945 = ORIENTED_EDGE('',*,*,#212946,.T.); +#212946 = EDGE_CURVE('',#212938,#212947,#212949,.T.); +#212947 = VERTEX_POINT('',#212948); +#212948 = CARTESIAN_POINT('',(173.560432,-72.702919,1.585)); +#212949 = LINE('',#212950,#212951); +#212950 = CARTESIAN_POINT('',(173.477364,-72.702919,1.585)); +#212951 = VECTOR('',#212952,1.); +#212952 = DIRECTION('',(1.,0.,0.)); +#212953 = ORIENTED_EDGE('',*,*,#212954,.T.); +#212954 = EDGE_CURVE('',#212947,#212955,#212957,.T.); +#212955 = VERTEX_POINT('',#212956); +#212956 = CARTESIAN_POINT('',(173.783316,-72.480034,1.585)); +#212957 = CIRCLE('',#212958,0.239437351684); +#212958 = AXIS2_PLACEMENT_3D('',#212959,#212960,#212961); +#212959 = CARTESIAN_POINT('',(173.54441490658,-72.46401797844,1.585)); +#212960 = DIRECTION('',(0.,0.,1.)); +#212961 = DIRECTION('',(6.689471506002E-02,-0.997760039838,0.)); +#212962 = ORIENTED_EDGE('',*,*,#212963,.T.); +#212963 = EDGE_CURVE('',#212955,#212964,#212966,.T.); +#212964 = VERTEX_POINT('',#212965); +#212965 = CARTESIAN_POINT('',(173.784757,-71.763287,1.585)); +#212966 = LINE('',#212967,#212968); +#212967 = CARTESIAN_POINT('',(173.783316,-72.480034,1.585)); +#212968 = VECTOR('',#212969,1.); +#212969 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#212970 = ORIENTED_EDGE('',*,*,#212971,.T.); +#212971 = EDGE_CURVE('',#212964,#212972,#212974,.T.); +#212972 = VERTEX_POINT('',#212973); +#212973 = CARTESIAN_POINT('',(173.795956,-71.736251,1.585)); +#212974 = LINE('',#212975,#212976); +#212975 = CARTESIAN_POINT('',(173.784757,-71.763287,1.585)); +#212976 = VECTOR('',#212977,1.); +#212977 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#212978 = ORIENTED_EDGE('',*,*,#212979,.T.); +#212979 = EDGE_CURVE('',#212972,#212902,#212980,.T.); +#212980 = LINE('',#212981,#212982); +#212981 = CARTESIAN_POINT('',(173.795956,-71.736251,1.585)); +#212982 = VECTOR('',#212983,1.); +#212983 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#212984 = PLANE('',#212985); +#212985 = AXIS2_PLACEMENT_3D('',#212986,#212987,#212988); +#212986 = CARTESIAN_POINT('',(0.,0.,1.585)); +#212987 = DIRECTION('',(0.,0.,1.)); +#212988 = DIRECTION('',(1.,0.,-0.)); +#212989 = SHELL_BASED_SURFACE_MODEL('',(#212990)); +#212990 = OPEN_SHELL('',(#212991)); +#212991 = ADVANCED_FACE('',(#212992),#213078,.T.); +#212992 = FACE_BOUND('',#212993,.F.); +#212993 = EDGE_LOOP('',(#212994,#213005,#213013,#213022,#213030,#213039, + #213047,#213056,#213064,#213072)); +#212994 = ORIENTED_EDGE('',*,*,#212995,.T.); +#212995 = EDGE_CURVE('',#212996,#212998,#213000,.T.); +#212996 = VERTEX_POINT('',#212997); +#212997 = CARTESIAN_POINT('',(196.166648,-71.715559,1.585)); +#212998 = VERTEX_POINT('',#212999); +#212999 = CARTESIAN_POINT('',(196.283316,-71.777919,1.585)); +#213000 = CIRCLE('',#213001,7.500000000002E-02); +#213001 = AXIS2_PLACEMENT_3D('',#213002,#213003,#213004); +#213002 = CARTESIAN_POINT('',(196.208316,-71.77791906555,1.585)); +#213003 = DIRECTION('',(0.,0.,-1.)); +#213004 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#213005 = ORIENTED_EDGE('',*,*,#213006,.T.); +#213006 = EDGE_CURVE('',#212998,#213007,#213009,.T.); +#213007 = VERTEX_POINT('',#213008); +#213008 = CARTESIAN_POINT('',(196.281116,-72.508666,1.585)); +#213009 = LINE('',#213010,#213011); +#213010 = CARTESIAN_POINT('',(196.283316,-71.777919,1.585)); +#213011 = VECTOR('',#213012,1.); +#213012 = DIRECTION('',(-3.01060425822E-03,-0.999995468121,0.)); +#213013 = ORIENTED_EDGE('',*,*,#213014,.T.); +#213014 = EDGE_CURVE('',#213007,#213015,#213017,.T.); +#213015 = VERTEX_POINT('',#213016); +#213016 = CARTESIAN_POINT('',(195.930007,-72.852189,1.585)); +#213017 = CIRCLE('',#213018,0.38184101318); +#213018 = AXIS2_PLACEMENT_3D('',#213019,#213020,#213021); +#213019 = CARTESIAN_POINT('',(195.90109350032,-72.47144424444,1.585)); +#213020 = DIRECTION('',(0.,0.,-1.)); +#213021 = DIRECTION('',(0.995237511316,-9.747972132586E-02,0.)); +#213022 = ORIENTED_EDGE('',*,*,#213023,.T.); +#213023 = EDGE_CURVE('',#213015,#213024,#213026,.T.); +#213024 = VERTEX_POINT('',#213025); +#213025 = CARTESIAN_POINT('',(195.812732,-72.851478,1.585)); +#213026 = LINE('',#213027,#213028); +#213027 = CARTESIAN_POINT('',(195.930007,-72.852189,1.585)); +#213028 = VECTOR('',#213029,1.); +#213029 = DIRECTION('',(-0.999981622503,6.062561787214E-03,0.)); +#213030 = ORIENTED_EDGE('',*,*,#213031,.T.); +#213031 = EDGE_CURVE('',#213024,#213032,#213034,.T.); +#213032 = VERTEX_POINT('',#213033); +#213033 = CARTESIAN_POINT('',(195.827364,-72.702919,1.585)); +#213034 = CIRCLE('',#213035,7.500006711464E-02); +#213035 = AXIS2_PLACEMENT_3D('',#213036,#213037,#213038); +#213036 = CARTESIAN_POINT('',(195.82736393288,-72.77791906711,1.585)); +#213037 = DIRECTION('',(0.,0.,-1.)); +#213038 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#213039 = ORIENTED_EDGE('',*,*,#213040,.T.); +#213040 = EDGE_CURVE('',#213032,#213041,#213043,.T.); +#213041 = VERTEX_POINT('',#213042); +#213042 = CARTESIAN_POINT('',(195.910432,-72.702919,1.585)); +#213043 = LINE('',#213044,#213045); +#213044 = CARTESIAN_POINT('',(195.827364,-72.702919,1.585)); +#213045 = VECTOR('',#213046,1.); +#213046 = DIRECTION('',(1.,0.,0.)); +#213047 = ORIENTED_EDGE('',*,*,#213048,.T.); +#213048 = EDGE_CURVE('',#213041,#213049,#213051,.T.); +#213049 = VERTEX_POINT('',#213050); +#213050 = CARTESIAN_POINT('',(196.133316,-72.480034,1.585)); +#213051 = CIRCLE('',#213052,0.239437351684); +#213052 = AXIS2_PLACEMENT_3D('',#213053,#213054,#213055); +#213053 = CARTESIAN_POINT('',(195.89441490658,-72.46401797844,1.585)); +#213054 = DIRECTION('',(0.,0.,1.)); +#213055 = DIRECTION('',(6.68947150599E-02,-0.997760039838,0.)); +#213056 = ORIENTED_EDGE('',*,*,#213057,.T.); +#213057 = EDGE_CURVE('',#213049,#213058,#213060,.T.); +#213058 = VERTEX_POINT('',#213059); +#213059 = CARTESIAN_POINT('',(196.134757,-71.763287,1.585)); +#213060 = LINE('',#213061,#213062); +#213061 = CARTESIAN_POINT('',(196.133316,-72.480034,1.585)); +#213062 = VECTOR('',#213063,1.); +#213063 = DIRECTION('',(2.010468251347E-03,0.999997979007,0.)); +#213064 = ORIENTED_EDGE('',*,*,#213065,.T.); +#213065 = EDGE_CURVE('',#213058,#213066,#213068,.T.); +#213066 = VERTEX_POINT('',#213067); +#213067 = CARTESIAN_POINT('',(196.145956,-71.736251,1.585)); +#213068 = LINE('',#213069,#213070); +#213069 = CARTESIAN_POINT('',(196.134757,-71.763287,1.585)); +#213070 = VECTOR('',#213071,1.); +#213071 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#213072 = ORIENTED_EDGE('',*,*,#213073,.T.); +#213073 = EDGE_CURVE('',#213066,#212996,#213074,.T.); +#213074 = LINE('',#213075,#213076); +#213075 = CARTESIAN_POINT('',(196.145956,-71.736251,1.585)); +#213076 = VECTOR('',#213077,1.); +#213077 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#213078 = PLANE('',#213079); +#213079 = AXIS2_PLACEMENT_3D('',#213080,#213081,#213082); +#213080 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213081 = DIRECTION('',(0.,0.,1.)); +#213082 = DIRECTION('',(1.,0.,-0.)); +#213083 = SHELL_BASED_SURFACE_MODEL('',(#213084)); +#213084 = OPEN_SHELL('',(#213085)); +#213085 = ADVANCED_FACE('',(#213086),#213147,.T.); +#213086 = FACE_BOUND('',#213087,.F.); +#213087 = EDGE_LOOP('',(#213088,#213099,#213107,#213116,#213124,#213133, + #213141)); +#213088 = ORIENTED_EDGE('',*,*,#213089,.T.); +#213089 = EDGE_CURVE('',#213090,#213092,#213094,.T.); +#213090 = VERTEX_POINT('',#213091); +#213091 = CARTESIAN_POINT('',(174.224637,-71.851478,1.585)); +#213092 = VERTEX_POINT('',#213093); +#213093 = CARTESIAN_POINT('',(174.239269,-71.702919,1.585)); +#213094 = CIRCLE('',#213095,7.500006711464E-02); +#213095 = AXIS2_PLACEMENT_3D('',#213096,#213097,#213098); +#213096 = CARTESIAN_POINT('',(174.23926893288,-71.77791906711,1.585)); +#213097 = DIRECTION('',(0.,0.,-1.)); +#213098 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#213099 = ORIENTED_EDGE('',*,*,#213100,.T.); +#213100 = EDGE_CURVE('',#213092,#213101,#213103,.T.); +#213101 = VERTEX_POINT('',#213102); +#213102 = CARTESIAN_POINT('',(174.920567,-71.70436,1.585)); +#213103 = LINE('',#213104,#213105); +#213104 = CARTESIAN_POINT('',(174.239269,-71.702919,1.585)); +#213105 = VECTOR('',#213106,1.); +#213106 = DIRECTION('',(0.999997763225,-2.115075600996E-03,0.)); +#213107 = ORIENTED_EDGE('',*,*,#213108,.T.); +#213108 = EDGE_CURVE('',#213101,#213109,#213111,.T.); +#213109 = VERTEX_POINT('',#213110); +#213110 = CARTESIAN_POINT('',(174.974871,-71.807463,1.585)); +#213111 = CIRCLE('',#213112,7.500015546837E-02); +#213112 = AXIS2_PLACEMENT_3D('',#213113,#213114,#213115); +#213113 = CARTESIAN_POINT('',(174.90593497422,-71.77791900449,1.585)); +#213114 = DIRECTION('',(0.,0.,-1.)); +#213115 = DIRECTION('',(0.195093272599,0.980784693491,0.)); +#213116 = ORIENTED_EDGE('',*,*,#213117,.T.); +#213117 = EDGE_CURVE('',#213109,#213118,#213120,.T.); +#213118 = VERTEX_POINT('',#213119); +#213119 = CARTESIAN_POINT('',(174.539212,-72.820344,1.585)); +#213120 = LINE('',#213121,#213122); +#213121 = CARTESIAN_POINT('',(174.974871,-71.807463,1.585)); +#213122 = VECTOR('',#213123,1.); +#213123 = DIRECTION('',(-0.395119729311,-0.918629631304,0.)); +#213124 = ORIENTED_EDGE('',*,*,#213125,.T.); +#213125 = EDGE_CURVE('',#213118,#213126,#213128,.T.); +#213126 = VERTEX_POINT('',#213127); +#213127 = CARTESIAN_POINT('',(174.408428,-72.748375,1.585)); +#213128 = CIRCLE('',#213129,7.500030178421E-02); +#213129 = AXIS2_PLACEMENT_3D('',#213130,#213131,#213132); +#213130 = CARTESIAN_POINT('',(174.47736434698,-72.77791861745,1.585)); +#213131 = DIRECTION('',(-0.,0.,-1.)); +#213132 = DIRECTION('',(0.82463205542,-0.565669491112,-0.)); +#213133 = ORIENTED_EDGE('',*,*,#213134,.T.); +#213134 = EDGE_CURVE('',#213126,#213135,#213137,.T.); +#213135 = VERTEX_POINT('',#213136); +#213136 = CARTESIAN_POINT('',(174.792194,-71.852919,1.585)); +#213137 = LINE('',#213138,#213139); +#213138 = CARTESIAN_POINT('',(174.408428,-72.748375,1.585)); +#213139 = VECTOR('',#213140,1.); +#213140 = DIRECTION('',(0.393918555284,0.919145348573,0.)); +#213141 = ORIENTED_EDGE('',*,*,#213142,.T.); +#213142 = EDGE_CURVE('',#213135,#213090,#213143,.T.); +#213143 = LINE('',#213144,#213145); +#213144 = CARTESIAN_POINT('',(174.792194,-71.852919,1.585)); +#213145 = VECTOR('',#213146,1.); +#213146 = DIRECTION('',(-0.999996776877,2.538943851418E-03,0.)); +#213147 = PLANE('',#213148); +#213148 = AXIS2_PLACEMENT_3D('',#213149,#213150,#213151); +#213149 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213150 = DIRECTION('',(0.,0.,1.)); +#213151 = DIRECTION('',(1.,0.,-0.)); +#213152 = SHELL_BASED_SURFACE_MODEL('',(#213153)); +#213153 = OPEN_SHELL('',(#213154)); +#213154 = ADVANCED_FACE('',(#213155,#213305,#213375),#213460,.T.); +#213155 = FACE_BOUND('',#213156,.F.); +#213156 = EDGE_LOOP('',(#213157,#213168,#213176,#213184,#213192,#213200, + #213208,#213216,#213225,#213233,#213242,#213250,#213259,#213267, + #213275,#213283,#213291,#213299)); +#213157 = ORIENTED_EDGE('',*,*,#213158,.T.); +#213158 = EDGE_CURVE('',#213159,#213161,#213163,.T.); +#213159 = VERTEX_POINT('',#213160); +#213160 = CARTESIAN_POINT('',(196.692285,-71.76242,1.585)); +#213161 = VERTEX_POINT('',#213162); +#213162 = CARTESIAN_POINT('',(197.160361,-71.767786,1.585)); +#213163 = CIRCLE('',#213164,0.397581403297); +#213164 = AXIS2_PLACEMENT_3D('',#213165,#213166,#213167); +#213165 = CARTESIAN_POINT('',(196.92263887062,-72.08646948161,1.585)); +#213166 = DIRECTION('',(0.,0.,-1.)); +#213167 = DIRECTION('',(-0.579387940978,0.815051908684,0.)); +#213168 = ORIENTED_EDGE('',*,*,#213169,.T.); +#213169 = EDGE_CURVE('',#213161,#213170,#213172,.T.); +#213170 = VERTEX_POINT('',#213171); +#213171 = CARTESIAN_POINT('',(197.223814,-71.833316,1.585)); +#213172 = LINE('',#213173,#213174); +#213173 = CARTESIAN_POINT('',(197.160361,-71.767786,1.585)); +#213174 = VECTOR('',#213175,1.); +#213175 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#213176 = ORIENTED_EDGE('',*,*,#213177,.T.); +#213177 = EDGE_CURVE('',#213170,#213178,#213180,.T.); +#213178 = VERTEX_POINT('',#213179); +#213179 = CARTESIAN_POINT('',(197.281875,-71.953763,1.585)); +#213180 = LINE('',#213181,#213182); +#213181 = CARTESIAN_POINT('',(197.223814,-71.833316,1.585)); +#213182 = VECTOR('',#213183,1.); +#213183 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#213184 = ORIENTED_EDGE('',*,*,#213185,.T.); +#213185 = EDGE_CURVE('',#213178,#213186,#213188,.T.); +#213186 = VERTEX_POINT('',#213187); +#213187 = CARTESIAN_POINT('',(197.280653,-72.035824,1.585)); +#213188 = LINE('',#213189,#213190); +#213189 = CARTESIAN_POINT('',(197.281875,-71.953763,1.585)); +#213190 = VECTOR('',#213191,1.); +#213191 = DIRECTION('',(-1.488971047975E-02,-0.999889142116,0.)); +#213192 = ORIENTED_EDGE('',*,*,#213193,.T.); +#213193 = EDGE_CURVE('',#213186,#213194,#213196,.T.); +#213194 = VERTEX_POINT('',#213195); +#213195 = CARTESIAN_POINT('',(197.218448,-72.158535,1.585)); +#213196 = LINE('',#213197,#213198); +#213197 = CARTESIAN_POINT('',(197.280653,-72.035824,1.585)); +#213198 = VECTOR('',#213199,1.); +#213199 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#213200 = ORIENTED_EDGE('',*,*,#213201,.T.); +#213201 = EDGE_CURVE('',#213194,#213202,#213204,.T.); +#213202 = VERTEX_POINT('',#213203); +#213203 = CARTESIAN_POINT('',(197.171525,-72.20649,1.585)); +#213204 = LINE('',#213205,#213206); +#213205 = CARTESIAN_POINT('',(197.218448,-72.158535,1.585)); +#213206 = VECTOR('',#213207,1.); +#213207 = DIRECTION('',(-0.699374120429,-0.714755790235,0.)); +#213208 = ORIENTED_EDGE('',*,*,#213209,.T.); +#213209 = EDGE_CURVE('',#213202,#213210,#213212,.T.); +#213210 = VERTEX_POINT('',#213211); +#213211 = CARTESIAN_POINT('',(197.227779,-72.268187,1.585)); +#213212 = LINE('',#213213,#213214); +#213213 = CARTESIAN_POINT('',(197.171525,-72.20649,1.585)); +#213214 = VECTOR('',#213215,1.); +#213215 = DIRECTION('',(0.673759436039,-0.738950757729,0.)); +#213216 = ORIENTED_EDGE('',*,*,#213217,.T.); +#213217 = EDGE_CURVE('',#213210,#213218,#213220,.T.); +#213218 = VERTEX_POINT('',#213219); +#213219 = CARTESIAN_POINT('',(197.218448,-72.729963,1.585)); +#213220 = CIRCLE('',#213221,0.395774657874); +#213221 = AXIS2_PLACEMENT_3D('',#213222,#213223,#213224); +#213222 = CARTESIAN_POINT('',(196.90176574421,-72.49258160079,1.585)); +#213223 = DIRECTION('',(0.,0.,-1.)); +#213224 = DIRECTION('',(0.823734540094,0.566975667428,0.)); +#213225 = ORIENTED_EDGE('',*,*,#213226,.T.); +#213226 = EDGE_CURVE('',#213218,#213227,#213229,.T.); +#213227 = VERTEX_POINT('',#213228); +#213228 = CARTESIAN_POINT('',(197.152918,-72.793417,1.585)); +#213229 = LINE('',#213230,#213231); +#213230 = CARTESIAN_POINT('',(197.218448,-72.729963,1.585)); +#213231 = VECTOR('',#213232,1.); +#213232 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#213233 = ORIENTED_EDGE('',*,*,#213234,.T.); +#213234 = EDGE_CURVE('',#213227,#213235,#213237,.T.); +#213235 = VERTEX_POINT('',#213236); +#213236 = CARTESIAN_POINT('',(196.684841,-72.78805,1.585)); +#213237 = CIRCLE('',#213238,0.397464151365); +#213238 = AXIS2_PLACEMENT_3D('',#213239,#213240,#213241); +#213239 = CARTESIAN_POINT('',(196.92256264058,-72.46951244614,1.585)); +#213240 = DIRECTION('',(-0.,0.,-1.)); +#213241 = DIRECTION('',(0.579562606145,-0.814927717996,-0.)); +#213242 = ORIENTED_EDGE('',*,*,#213243,.T.); +#213243 = EDGE_CURVE('',#213235,#213244,#213246,.T.); +#213244 = VERTEX_POINT('',#213245); +#213245 = CARTESIAN_POINT('',(196.621388,-72.722517,1.585)); +#213246 = LINE('',#213247,#213248); +#213247 = CARTESIAN_POINT('',(196.684841,-72.78805,1.585)); +#213248 = VECTOR('',#213249,1.); +#213249 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#213250 = ORIENTED_EDGE('',*,*,#213251,.T.); +#213251 = EDGE_CURVE('',#213244,#213252,#213254,.T.); +#213252 = VERTEX_POINT('',#213253); +#213253 = CARTESIAN_POINT('',(196.626755,-72.254444,1.585)); +#213254 = CIRCLE('',#213255,0.397465551155); +#213255 = AXIS2_PLACEMENT_3D('',#213256,#213257,#213258); +#213256 = CARTESIAN_POINT('',(196.94529574227,-72.49216370862,1.585)); +#213257 = DIRECTION('',(0.,0.,-1.)); +#213258 = DIRECTION('',(-0.814932869863,-0.579555361995,-0.)); +#213259 = ORIENTED_EDGE('',*,*,#213260,.T.); +#213260 = EDGE_CURVE('',#213252,#213261,#213263,.T.); +#213261 = VERTEX_POINT('',#213262); +#213262 = CARTESIAN_POINT('',(196.673679,-72.20649,1.585)); +#213263 = LINE('',#213264,#213265); +#213264 = CARTESIAN_POINT('',(196.626755,-72.254444,1.585)); +#213265 = VECTOR('',#213266,1.); +#213266 = DIRECTION('',(0.699389185334,0.714741049218,0.)); +#213267 = ORIENTED_EDGE('',*,*,#213268,.T.); +#213268 = EDGE_CURVE('',#213261,#213269,#213271,.T.); +#213269 = VERTEX_POINT('',#213270); +#213270 = CARTESIAN_POINT('',(196.617425,-72.144793,1.585)); +#213271 = LINE('',#213272,#213273); +#213272 = CARTESIAN_POINT('',(196.673679,-72.20649,1.585)); +#213273 = VECTOR('',#213274,1.); +#213274 = DIRECTION('',(-0.673759436039,0.738950757729,0.)); +#213275 = ORIENTED_EDGE('',*,*,#213276,.T.); +#213276 = EDGE_CURVE('',#213269,#213277,#213279,.T.); +#213277 = VERTEX_POINT('',#213278); +#213278 = CARTESIAN_POINT('',(196.563329,-72.030646,1.585)); +#213279 = LINE('',#213280,#213281); +#213280 = CARTESIAN_POINT('',(196.617425,-72.144793,1.585)); +#213281 = VECTOR('',#213282,1.); +#213282 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#213283 = ORIENTED_EDGE('',*,*,#213284,.T.); +#213284 = EDGE_CURVE('',#213277,#213285,#213287,.T.); +#213285 = VERTEX_POINT('',#213286); +#213286 = CARTESIAN_POINT('',(196.564551,-71.948586,1.585)); +#213287 = LINE('',#213288,#213289); +#213288 = CARTESIAN_POINT('',(196.563329,-72.030646,1.585)); +#213289 = VECTOR('',#213290,1.); +#213290 = DIRECTION('',(1.488989188824E-02,0.999889139415,0.)); +#213291 = ORIENTED_EDGE('',*,*,#213292,.T.); +#213292 = EDGE_CURVE('',#213285,#213293,#213295,.T.); +#213293 = VERTEX_POINT('',#213294); +#213294 = CARTESIAN_POINT('',(196.626755,-71.825873,1.585)); +#213295 = LINE('',#213296,#213297); +#213296 = CARTESIAN_POINT('',(196.564551,-71.948586,1.585)); +#213297 = VECTOR('',#213298,1.); +#213298 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#213299 = ORIENTED_EDGE('',*,*,#213300,.T.); +#213300 = EDGE_CURVE('',#213293,#213159,#213301,.T.); +#213301 = LINE('',#213302,#213303); +#213302 = CARTESIAN_POINT('',(196.626755,-71.825873,1.585)); +#213303 = VECTOR('',#213304,1.); +#213304 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#213305 = FACE_BOUND('',#213306,.F.); +#213306 = EDGE_LOOP('',(#213307,#213318,#213326,#213335,#213343,#213352, + #213360,#213369)); +#213307 = ORIENTED_EDGE('',*,*,#213308,.T.); +#213308 = EDGE_CURVE('',#213309,#213311,#213313,.T.); +#213309 = VERTEX_POINT('',#213310); +#213310 = CARTESIAN_POINT('',(197.068651,-72.315748,1.585)); +#213311 = VERTEX_POINT('',#213312); +#213312 = CARTESIAN_POINT('',(196.776553,-72.315748,1.585)); +#213313 = CIRCLE('',#213314,0.252889603602); +#213314 = AXIS2_PLACEMENT_3D('',#213315,#213316,#213317); +#213315 = CARTESIAN_POINT('',(196.922602,-72.522201,1.585)); +#213316 = DIRECTION('',(0.,0.,1.)); +#213317 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#213318 = ORIENTED_EDGE('',*,*,#213319,.T.); +#213319 = EDGE_CURVE('',#213311,#213320,#213322,.T.); +#213320 = VERTEX_POINT('',#213321); +#213321 = CARTESIAN_POINT('',(196.746146,-72.346155,1.585)); +#213322 = LINE('',#213323,#213324); +#213323 = CARTESIAN_POINT('',(196.776553,-72.315748,1.585)); +#213324 = VECTOR('',#213325,1.); +#213325 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#213326 = ORIENTED_EDGE('',*,*,#213327,.T.); +#213327 = EDGE_CURVE('',#213320,#213328,#213330,.T.); +#213328 = VERTEX_POINT('',#213329); +#213329 = CARTESIAN_POINT('',(196.746146,-72.638253,1.585)); +#213330 = CIRCLE('',#213331,0.252889603602); +#213331 = AXIS2_PLACEMENT_3D('',#213332,#213333,#213334); +#213332 = CARTESIAN_POINT('',(196.952599,-72.492204,1.585)); +#213333 = DIRECTION('',(0.,0.,1.)); +#213334 = DIRECTION('',(-0.816375988017,0.577520775547,0.)); +#213335 = ORIENTED_EDGE('',*,*,#213336,.T.); +#213336 = EDGE_CURVE('',#213328,#213337,#213339,.T.); +#213337 = VERTEX_POINT('',#213338); +#213338 = CARTESIAN_POINT('',(196.776553,-72.668661,1.585)); +#213339 = LINE('',#213340,#213341); +#213340 = CARTESIAN_POINT('',(196.746146,-72.638253,1.585)); +#213341 = VECTOR('',#213342,1.); +#213342 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#213343 = ORIENTED_EDGE('',*,*,#213344,.T.); +#213344 = EDGE_CURVE('',#213337,#213345,#213347,.T.); +#213345 = VERTEX_POINT('',#213346); +#213346 = CARTESIAN_POINT('',(197.06865,-72.668661,1.585)); +#213347 = CIRCLE('',#213348,0.252888498466); +#213348 = AXIS2_PLACEMENT_3D('',#213349,#213350,#213351); +#213349 = CARTESIAN_POINT('',(196.9226015,-72.462209,1.585)); +#213350 = DIRECTION('',(0.,0.,1.)); +#213351 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#213352 = ORIENTED_EDGE('',*,*,#213353,.T.); +#213353 = EDGE_CURVE('',#213345,#213354,#213356,.T.); +#213354 = VERTEX_POINT('',#213355); +#213355 = CARTESIAN_POINT('',(197.099057,-72.638253,1.585)); +#213356 = LINE('',#213357,#213358); +#213357 = CARTESIAN_POINT('',(197.06865,-72.668661,1.585)); +#213358 = VECTOR('',#213359,1.); +#213359 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#213360 = ORIENTED_EDGE('',*,*,#213361,.T.); +#213361 = EDGE_CURVE('',#213354,#213362,#213364,.T.); +#213362 = VERTEX_POINT('',#213363); +#213363 = CARTESIAN_POINT('',(197.099058,-72.346155,1.585)); +#213364 = CIRCLE('',#213365,0.252885429722); +#213365 = AXIS2_PLACEMENT_3D('',#213366,#213367,#213368); +#213366 = CARTESIAN_POINT('',(196.89260961271,-72.49220329322,1.585)); +#213367 = DIRECTION('',(0.,-0.,1.)); +#213368 = DIRECTION('',(0.816367267623,-0.577533102387,-0.)); +#213369 = ORIENTED_EDGE('',*,*,#213370,.T.); +#213370 = EDGE_CURVE('',#213362,#213309,#213371,.T.); +#213371 = LINE('',#213372,#213373); +#213372 = CARTESIAN_POINT('',(197.099058,-72.346155,1.585)); +#213373 = VECTOR('',#213374,1.); +#213374 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#213375 = FACE_BOUND('',#213376,.F.); +#213376 = EDGE_LOOP('',(#213377,#213388,#213396,#213404,#213412,#213421, + #213429,#213438,#213446,#213454)); +#213377 = ORIENTED_EDGE('',*,*,#213378,.T.); +#213378 = EDGE_CURVE('',#213379,#213381,#213383,.T.); +#213379 = VERTEX_POINT('',#213380); +#213380 = CARTESIAN_POINT('',(197.068651,-71.887177,1.585)); +#213381 = VERTEX_POINT('',#213382); +#213382 = CARTESIAN_POINT('',(196.776553,-71.887177,1.585)); +#213383 = CIRCLE('',#213384,0.252889603602); +#213384 = AXIS2_PLACEMENT_3D('',#213385,#213386,#213387); +#213385 = CARTESIAN_POINT('',(196.922602,-72.09363,1.585)); +#213386 = DIRECTION('',(0.,0.,1.)); +#213387 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#213388 = ORIENTED_EDGE('',*,*,#213389,.T.); +#213389 = EDGE_CURVE('',#213381,#213390,#213392,.T.); +#213390 = VERTEX_POINT('',#213391); +#213391 = CARTESIAN_POINT('',(196.746146,-71.917584,1.585)); +#213392 = LINE('',#213393,#213394); +#213393 = CARTESIAN_POINT('',(196.776553,-71.887177,1.585)); +#213394 = VECTOR('',#213395,1.); +#213395 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#213396 = ORIENTED_EDGE('',*,*,#213397,.T.); +#213397 = EDGE_CURVE('',#213390,#213398,#213400,.T.); +#213398 = VERTEX_POINT('',#213399); +#213399 = CARTESIAN_POINT('',(196.711888,-71.9861,1.585)); +#213400 = LINE('',#213401,#213402); +#213401 = CARTESIAN_POINT('',(196.746146,-71.917584,1.585)); +#213402 = VECTOR('',#213403,1.); +#213403 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#213404 = ORIENTED_EDGE('',*,*,#213405,.T.); +#213405 = EDGE_CURVE('',#213398,#213406,#213408,.T.); +#213406 = VERTEX_POINT('',#213407); +#213407 = CARTESIAN_POINT('',(196.711888,-71.998309,1.585)); +#213408 = LINE('',#213409,#213410); +#213409 = CARTESIAN_POINT('',(196.711888,-71.9861,1.585)); +#213410 = VECTOR('',#213411,1.); +#213411 = DIRECTION('',(0.,-1.,0.)); +#213412 = ORIENTED_EDGE('',*,*,#213413,.T.); +#213413 = EDGE_CURVE('',#213406,#213414,#213416,.T.); +#213414 = VERTEX_POINT('',#213415); +#213415 = CARTESIAN_POINT('',(196.845069,-72.13149,1.585)); +#213416 = CIRCLE('',#213417,0.18686440374); +#213417 = AXIS2_PLACEMENT_3D('',#213418,#213419,#213420); +#213418 = CARTESIAN_POINT('',(196.892605,-71.950773,1.585)); +#213419 = DIRECTION('',(0.,0.,1.)); +#213420 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#213421 = ORIENTED_EDGE('',*,*,#213422,.T.); +#213422 = EDGE_CURVE('',#213414,#213423,#213425,.T.); +#213423 = VERTEX_POINT('',#213424); +#213424 = CARTESIAN_POINT('',(197.000135,-72.13149,1.585)); +#213425 = LINE('',#213426,#213427); +#213426 = CARTESIAN_POINT('',(196.845069,-72.13149,1.585)); +#213427 = VECTOR('',#213428,1.); +#213428 = DIRECTION('',(1.,0.,0.)); +#213429 = ORIENTED_EDGE('',*,*,#213430,.T.); +#213430 = EDGE_CURVE('',#213423,#213431,#213433,.T.); +#213431 = VERTEX_POINT('',#213432); +#213432 = CARTESIAN_POINT('',(197.133316,-71.998309,1.585)); +#213433 = CIRCLE('',#213434,0.18686440374); +#213434 = AXIS2_PLACEMENT_3D('',#213435,#213436,#213437); +#213435 = CARTESIAN_POINT('',(196.952599,-71.950773,1.585)); +#213436 = DIRECTION('',(0.,0.,1.)); +#213437 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#213438 = ORIENTED_EDGE('',*,*,#213439,.T.); +#213439 = EDGE_CURVE('',#213431,#213440,#213442,.T.); +#213440 = VERTEX_POINT('',#213441); +#213441 = CARTESIAN_POINT('',(197.133316,-71.9861,1.585)); +#213442 = LINE('',#213443,#213444); +#213443 = CARTESIAN_POINT('',(197.133316,-71.998309,1.585)); +#213444 = VECTOR('',#213445,1.); +#213445 = DIRECTION('',(0.,1.,0.)); +#213446 = ORIENTED_EDGE('',*,*,#213447,.T.); +#213447 = EDGE_CURVE('',#213440,#213448,#213450,.T.); +#213448 = VERTEX_POINT('',#213449); +#213449 = CARTESIAN_POINT('',(197.099058,-71.917584,1.585)); +#213450 = LINE('',#213451,#213452); +#213451 = CARTESIAN_POINT('',(197.133316,-71.9861,1.585)); +#213452 = VECTOR('',#213453,1.); +#213453 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#213454 = ORIENTED_EDGE('',*,*,#213455,.T.); +#213455 = EDGE_CURVE('',#213448,#213379,#213456,.T.); +#213456 = LINE('',#213457,#213458); +#213457 = CARTESIAN_POINT('',(197.099058,-71.917584,1.585)); +#213458 = VECTOR('',#213459,1.); +#213459 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#213460 = PLANE('',#213461); +#213461 = AXIS2_PLACEMENT_3D('',#213462,#213463,#213464); +#213462 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213463 = DIRECTION('',(0.,0.,1.)); +#213464 = DIRECTION('',(1.,0.,-0.)); +#213465 = SHELL_BASED_SURFACE_MODEL('',(#213466)); +#213466 = OPEN_SHELL('',(#213467)); +#213467 = ADVANCED_FACE('',(#213468,#213620),#213688,.T.); +#213468 = FACE_BOUND('',#213469,.F.); +#213469 = EDGE_LOOP('',(#213470,#213481,#213489,#213497,#213506,#213514, + #213522,#213530,#213539,#213547,#213555,#213564,#213572,#213581, + #213589,#213597,#213605,#213614)); +#213470 = ORIENTED_EDGE('',*,*,#213471,.T.); +#213471 = EDGE_CURVE('',#213472,#213474,#213476,.T.); +#213472 = VERTEX_POINT('',#213473); +#213473 = CARTESIAN_POINT('',(101.770503,-70.711919,1.585)); +#213474 = VERTEX_POINT('',#213475); +#213475 = CARTESIAN_POINT('',(102.018684,-70.467693,1.585)); +#213476 = CIRCLE('',#213477,0.3486213829); +#213477 = AXIS2_PLACEMENT_3D('',#213478,#213479,#213480); +#213478 = CARTESIAN_POINT('',(102.10644422951,-70.80508744383,1.585)); +#213479 = DIRECTION('',(0.,0.,-1.)); +#213480 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#213481 = ORIENTED_EDGE('',*,*,#213482,.T.); +#213482 = EDGE_CURVE('',#213474,#213483,#213485,.T.); +#213483 = VERTEX_POINT('',#213484); +#213484 = CARTESIAN_POINT('',(102.238424,-70.467693,1.585)); +#213485 = LINE('',#213486,#213487); +#213486 = CARTESIAN_POINT('',(102.018684,-70.467693,1.585)); +#213487 = VECTOR('',#213488,1.); +#213488 = DIRECTION('',(1.,0.,0.)); +#213489 = ORIENTED_EDGE('',*,*,#213490,.T.); +#213490 = EDGE_CURVE('',#213483,#213491,#213493,.T.); +#213491 = VERTEX_POINT('',#213492); +#213492 = CARTESIAN_POINT('',(102.273833,-70.48242,1.585)); +#213493 = LINE('',#213494,#213495); +#213494 = CARTESIAN_POINT('',(102.238424,-70.467693,1.585)); +#213495 = VECTOR('',#213496,1.); +#213496 = DIRECTION('',(0.923324376396,-0.3840209577,0.)); +#213497 = ORIENTED_EDGE('',*,*,#213498,.T.); +#213498 = EDGE_CURVE('',#213491,#213499,#213501,.T.); +#213499 = VERTEX_POINT('',#213500); +#213500 = CARTESIAN_POINT('',(102.360698,-70.478892,1.585)); +#213501 = CIRCLE('',#213502,7.226854941616E-02); +#213502 = AXIS2_PLACEMENT_3D('',#213503,#213504,#213505); +#213503 = CARTESIAN_POINT('',(102.31960843241,-70.53834274154,1.585)); +#213504 = DIRECTION('',(0.,0.,-1.)); +#213505 = DIRECTION('',(-0.633407378233,0.773818514382,0.)); +#213506 = ORIENTED_EDGE('',*,*,#213507,.T.); +#213507 = EDGE_CURVE('',#213499,#213508,#213510,.T.); +#213508 = VERTEX_POINT('',#213509); +#213509 = CARTESIAN_POINT('',(102.38139,-70.499584,1.585)); +#213510 = LINE('',#213511,#213512); +#213511 = CARTESIAN_POINT('',(102.360698,-70.478892,1.585)); +#213512 = VECTOR('',#213513,1.); +#213513 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#213514 = ORIENTED_EDGE('',*,*,#213515,.T.); +#213515 = EDGE_CURVE('',#213508,#213516,#213518,.T.); +#213516 = VERTEX_POINT('',#213517); +#213517 = CARTESIAN_POINT('',(102.39403,-70.541252,1.585)); +#213518 = LINE('',#213519,#213520); +#213519 = CARTESIAN_POINT('',(102.38139,-70.499584,1.585)); +#213520 = VECTOR('',#213521,1.); +#213521 = DIRECTION('',(0.29028783999,-0.956939376321,0.)); +#213522 = ORIENTED_EDGE('',*,*,#213523,.T.); +#213523 = EDGE_CURVE('',#213516,#213524,#213526,.T.); +#213524 = VERTEX_POINT('',#213525); +#213525 = CARTESIAN_POINT('',(102.391367,-71.370586,1.585)); +#213526 = LINE('',#213527,#213528); +#213527 = CARTESIAN_POINT('',(102.39403,-70.541252,1.585)); +#213528 = VECTOR('',#213529,1.); +#213529 = DIRECTION('',(-3.210993726964E-03,-0.999994844746,0.)); +#213530 = ORIENTED_EDGE('',*,*,#213531,.T.); +#213531 = EDGE_CURVE('',#213524,#213532,#213534,.T.); +#213532 = VERTEX_POINT('',#213533); +#213533 = CARTESIAN_POINT('',(102.143186,-71.614811,1.585)); +#213534 = CIRCLE('',#213535,0.348632345849); +#213535 = AXIS2_PLACEMENT_3D('',#213536,#213537,#213538); +#213536 = CARTESIAN_POINT('',(102.05541719403,-71.2774074593,1.585)); +#213537 = DIRECTION('',(0.,0.,-1.)); +#213538 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#213539 = ORIENTED_EDGE('',*,*,#213540,.T.); +#213540 = EDGE_CURVE('',#213532,#213541,#213543,.T.); +#213541 = VERTEX_POINT('',#213542); +#213542 = CARTESIAN_POINT('',(101.965887,-71.613589,1.585)); +#213543 = LINE('',#213544,#213545); +#213544 = CARTESIAN_POINT('',(102.143186,-71.614811,1.585)); +#213545 = VECTOR('',#213546,1.); +#213546 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#213547 = ORIENTED_EDGE('',*,*,#213548,.T.); +#213548 = EDGE_CURVE('',#213541,#213549,#213551,.T.); +#213549 = VERTEX_POINT('',#213550); +#213550 = CARTESIAN_POINT('',(101.844475,-71.552883,1.585)); +#213551 = LINE('',#213552,#213553); +#213552 = CARTESIAN_POINT('',(101.965887,-71.613589,1.585)); +#213553 = VECTOR('',#213554,1.); +#213554 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#213555 = ORIENTED_EDGE('',*,*,#213556,.T.); +#213556 = EDGE_CURVE('',#213549,#213557,#213559,.T.); +#213557 = VERTEX_POINT('',#213558); +#213558 = CARTESIAN_POINT('',(101.924,-71.426551,1.585)); +#213559 = CIRCLE('',#213560,7.500029440361E-02); +#213560 = AXIS2_PLACEMENT_3D('',#213561,#213562,#213563); +#213561 = CARTESIAN_POINT('',(101.89045894602,-71.49363335132,1.585)); +#213562 = DIRECTION('',(0.,0.,-1.)); +#213563 = DIRECTION('',(-0.613116873665,-0.789992214662,-0.)); +#213564 = ORIENTED_EDGE('',*,*,#213565,.T.); +#213565 = EDGE_CURVE('',#213557,#213566,#213568,.T.); +#213566 = VERTEX_POINT('',#213567); +#213567 = CARTESIAN_POINT('',(102.003402,-71.466252,1.585)); +#213568 = LINE('',#213569,#213570); +#213569 = CARTESIAN_POINT('',(101.924,-71.426551,1.585)); +#213570 = VECTOR('',#213571,1.); +#213571 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#213572 = ORIENTED_EDGE('',*,*,#213573,.T.); +#213573 = EDGE_CURVE('',#213566,#213574,#213576,.T.); +#213574 = VERTEX_POINT('',#213575); +#213575 = CARTESIAN_POINT('',(102.209772,-71.401587,1.585)); +#213576 = CIRCLE('',#213577,0.197624884179); +#213577 = AXIS2_PLACEMENT_3D('',#213578,#213579,#213580); +#213578 = CARTESIAN_POINT('',(102.0571255,-71.27606950765,1.585)); +#213579 = DIRECTION('',(0.,0.,1.)); +#213580 = DIRECTION('',(-0.271845826618,-0.962340816213,0.)); +#213581 = ORIENTED_EDGE('',*,*,#213582,.T.); +#213582 = EDGE_CURVE('',#213574,#213583,#213585,.T.); +#213583 = VERTEX_POINT('',#213584); +#213584 = CARTESIAN_POINT('',(102.24403,-71.333071,1.585)); +#213585 = LINE('',#213586,#213587); +#213586 = CARTESIAN_POINT('',(102.209772,-71.401587,1.585)); +#213587 = VECTOR('',#213588,1.); +#213588 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#213589 = ORIENTED_EDGE('',*,*,#213590,.T.); +#213590 = EDGE_CURVE('',#213583,#213591,#213593,.T.); +#213591 = VERTEX_POINT('',#213592); +#213592 = CARTESIAN_POINT('',(102.243601,-71.280256,1.585)); +#213593 = LINE('',#213594,#213595); +#213594 = CARTESIAN_POINT('',(102.24403,-71.333071,1.585)); +#213595 = VECTOR('',#213596,1.); +#213596 = DIRECTION('',(-8.122424470089E-03,0.999967012566,0.)); +#213597 = ORIENTED_EDGE('',*,*,#213598,.T.); +#213598 = EDGE_CURVE('',#213591,#213599,#213601,.T.); +#213599 = VERTEX_POINT('',#213600); +#213600 = CARTESIAN_POINT('',(102.013506,-71.280256,1.585)); +#213601 = LINE('',#213602,#213603); +#213602 = CARTESIAN_POINT('',(102.243601,-71.280256,1.585)); +#213603 = VECTOR('',#213604,1.); +#213604 = DIRECTION('',(-1.,0.,0.)); +#213605 = ORIENTED_EDGE('',*,*,#213606,.T.); +#213606 = EDGE_CURVE('',#213599,#213607,#213609,.T.); +#213607 = VERTEX_POINT('',#213608); +#213608 = CARTESIAN_POINT('',(101.769281,-71.032074,1.585)); +#213609 = CIRCLE('',#213610,0.348628446662); +#213610 = AXIS2_PLACEMENT_3D('',#213611,#213612,#213613); +#213611 = CARTESIAN_POINT('',(102.10668161322,-70.94430942847,1.585)); +#213612 = DIRECTION('',(0.,0.,-1.)); +#213613 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#213614 = ORIENTED_EDGE('',*,*,#213615,.T.); +#213615 = EDGE_CURVE('',#213607,#213472,#213616,.T.); +#213616 = LINE('',#213617,#213618); +#213617 = CARTESIAN_POINT('',(101.769281,-71.032074,1.585)); +#213618 = VECTOR('',#213619,1.); +#213619 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#213620 = FACE_BOUND('',#213621,.F.); +#213621 = EDGE_LOOP('',(#213622,#213632,#213640,#213649,#213657,#213666, + #213674,#213682)); +#213622 = ORIENTED_EDGE('',*,*,#213623,.T.); +#213623 = EDGE_CURVE('',#213624,#213626,#213628,.T.); +#213624 = VERTEX_POINT('',#213625); +#213625 = CARTESIAN_POINT('',(102.24403,-70.635223,1.585)); +#213626 = VERTEX_POINT('',#213627); +#213627 = CARTESIAN_POINT('',(102.206087,-70.616252,1.585)); +#213628 = LINE('',#213629,#213630); +#213629 = CARTESIAN_POINT('',(102.24403,-70.635223,1.585)); +#213630 = VECTOR('',#213631,1.); +#213631 = DIRECTION('',(-0.894431905559,0.447204166258,0.)); +#213632 = ORIENTED_EDGE('',*,*,#213633,.T.); +#213633 = EDGE_CURVE('',#213626,#213634,#213636,.T.); +#213634 = VERTEX_POINT('',#213635); +#213635 = CARTESIAN_POINT('',(102.051021,-70.616252,1.585)); +#213636 = LINE('',#213637,#213638); +#213637 = CARTESIAN_POINT('',(102.206087,-70.616252,1.585)); +#213638 = VECTOR('',#213639,1.); +#213639 = DIRECTION('',(-1.,0.,0.)); +#213640 = ORIENTED_EDGE('',*,*,#213641,.T.); +#213641 = EDGE_CURVE('',#213634,#213642,#213644,.T.); +#213642 = VERTEX_POINT('',#213643); +#213643 = CARTESIAN_POINT('',(101.91784,-70.749433,1.585)); +#213644 = CIRCLE('',#213645,0.18686440374); +#213645 = AXIS2_PLACEMENT_3D('',#213646,#213647,#213648); +#213646 = CARTESIAN_POINT('',(102.098557,-70.796969,1.585)); +#213647 = DIRECTION('',(0.,0.,1.)); +#213648 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#213649 = ORIENTED_EDGE('',*,*,#213650,.T.); +#213650 = EDGE_CURVE('',#213642,#213651,#213653,.T.); +#213651 = VERTEX_POINT('',#213652); +#213652 = CARTESIAN_POINT('',(101.91784,-70.999737,1.585)); +#213653 = LINE('',#213654,#213655); +#213654 = CARTESIAN_POINT('',(101.91784,-70.749433,1.585)); +#213655 = VECTOR('',#213656,1.); +#213656 = DIRECTION('',(0.,-1.,0.)); +#213657 = ORIENTED_EDGE('',*,*,#213658,.T.); +#213658 = EDGE_CURVE('',#213651,#213659,#213661,.T.); +#213659 = VERTEX_POINT('',#213660); +#213660 = CARTESIAN_POINT('',(102.051021,-71.132919,1.585)); +#213661 = CIRCLE('',#213662,0.186867373533); +#213662 = AXIS2_PLACEMENT_3D('',#213663,#213664,#213665); +#213663 = CARTESIAN_POINT('',(102.09855971388,-70.95219964305,1.585)); +#213664 = DIRECTION('',(0.,0.,1.)); +#213665 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#213666 = ORIENTED_EDGE('',*,*,#213667,.T.); +#213667 = EDGE_CURVE('',#213659,#213668,#213670,.T.); +#213668 = VERTEX_POINT('',#213669); +#213669 = CARTESIAN_POINT('',(102.206087,-71.132919,1.585)); +#213670 = LINE('',#213671,#213672); +#213671 = CARTESIAN_POINT('',(102.051021,-71.132919,1.585)); +#213672 = VECTOR('',#213673,1.); +#213673 = DIRECTION('',(1.,0.,0.)); +#213674 = ORIENTED_EDGE('',*,*,#213675,.T.); +#213675 = EDGE_CURVE('',#213668,#213676,#213678,.T.); +#213676 = VERTEX_POINT('',#213677); +#213677 = CARTESIAN_POINT('',(102.24403,-71.113947,1.585)); +#213678 = LINE('',#213679,#213680); +#213679 = CARTESIAN_POINT('',(102.206087,-71.132919,1.585)); +#213680 = VECTOR('',#213681,1.); +#213681 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#213682 = ORIENTED_EDGE('',*,*,#213683,.T.); +#213683 = EDGE_CURVE('',#213676,#213624,#213684,.T.); +#213684 = LINE('',#213685,#213686); +#213685 = CARTESIAN_POINT('',(102.24403,-71.113947,1.585)); +#213686 = VECTOR('',#213687,1.); +#213687 = DIRECTION('',(0.,1.,0.)); +#213688 = PLANE('',#213689); +#213689 = AXIS2_PLACEMENT_3D('',#213690,#213691,#213692); +#213690 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213691 = DIRECTION('',(0.,0.,1.)); +#213692 = DIRECTION('',(1.,0.,-0.)); +#213693 = SHELL_BASED_SURFACE_MODEL('',(#213694)); +#213694 = OPEN_SHELL('',(#213695)); +#213695 = ADVANCED_FACE('',(#213696,#213807),#213859,.T.); +#213696 = FACE_BOUND('',#213697,.F.); +#213697 = EDGE_LOOP('',(#213698,#213709,#213717,#213726,#213734,#213743, + #213751,#213759,#213768,#213776,#213784,#213792,#213801)); +#213698 = ORIENTED_EDGE('',*,*,#213699,.T.); +#213699 = EDGE_CURVE('',#213700,#213702,#213704,.T.); +#213700 = VERTEX_POINT('',#213701); +#213701 = CARTESIAN_POINT('',(100.34071,-70.193287,1.585)); +#213702 = VERTEX_POINT('',#213703); +#213703 = CARTESIAN_POINT('',(100.414269,-70.132919,1.585)); +#213704 = CIRCLE('',#213705,7.500074938988E-02); +#213705 = AXIS2_PLACEMENT_3D('',#213706,#213707,#213708); +#213706 = CARTESIAN_POINT('',(100.41426946611,-70.20791974938,1.585)); +#213707 = DIRECTION('',(0.,0.,-1.)); +#213708 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#213709 = ORIENTED_EDGE('',*,*,#213710,.T.); +#213710 = EDGE_CURVE('',#213702,#213711,#213713,.T.); +#213711 = VERTEX_POINT('',#213712); +#213712 = CARTESIAN_POINT('',(100.809853,-70.13436,1.585)); +#213713 = LINE('',#213714,#213715); +#213714 = CARTESIAN_POINT('',(100.414269,-70.132919,1.585)); +#213715 = VECTOR('',#213716,1.); +#213716 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#213717 = ORIENTED_EDGE('',*,*,#213718,.T.); +#213718 = EDGE_CURVE('',#213711,#213719,#213721,.T.); +#213719 = VERTEX_POINT('',#213720); +#213720 = CARTESIAN_POINT('',(101.059256,-70.383763,1.585)); +#213721 = CIRCLE('',#213722,0.347870264855); +#213722 = AXIS2_PLACEMENT_3D('',#213723,#213724,#213725); +#213723 = CARTESIAN_POINT('',(100.72252526502,-70.47109073497,1.585)); +#213724 = DIRECTION('',(0.,0.,-1.)); +#213725 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#213726 = ORIENTED_EDGE('',*,*,#213727,.T.); +#213727 = EDGE_CURVE('',#213719,#213728,#213730,.T.); +#213728 = VERTEX_POINT('',#213729); +#213729 = CARTESIAN_POINT('',(101.058034,-70.561062,1.585)); +#213730 = LINE('',#213731,#213732); +#213731 = CARTESIAN_POINT('',(101.059256,-70.383763,1.585)); +#213732 = VECTOR('',#213733,1.); +#213733 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#213734 = ORIENTED_EDGE('',*,*,#213735,.T.); +#213735 = EDGE_CURVE('',#213728,#213736,#213738,.T.); +#213736 = VERTEX_POINT('',#213737); +#213737 = CARTESIAN_POINT('',(100.809853,-70.805287,1.585)); +#213738 = CIRCLE('',#213739,0.348632345849); +#213739 = AXIS2_PLACEMENT_3D('',#213740,#213741,#213742); +#213740 = CARTESIAN_POINT('',(100.72208419403,-70.4678834593,1.585)); +#213741 = DIRECTION('',(0.,0.,-1.)); +#213742 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#213743 = ORIENTED_EDGE('',*,*,#213744,.T.); +#213744 = EDGE_CURVE('',#213736,#213745,#213747,.T.); +#213745 = VERTEX_POINT('',#213746); +#213746 = CARTESIAN_POINT('',(100.796336,-70.806618,1.585)); +#213747 = LINE('',#213748,#213749); +#213748 = CARTESIAN_POINT('',(100.809853,-70.805287,1.585)); +#213749 = VECTOR('',#213750,1.); +#213750 = DIRECTION('',(-0.995186940545,-9.799465989924E-02,0.)); +#213751 = ORIENTED_EDGE('',*,*,#213752,.T.); +#213752 = EDGE_CURVE('',#213745,#213753,#213755,.T.); +#213753 = VERTEX_POINT('',#213754); +#213754 = CARTESIAN_POINT('',(101.05435,-71.177723,1.585)); +#213755 = LINE('',#213756,#213757); +#213756 = CARTESIAN_POINT('',(100.796336,-70.806618,1.585)); +#213757 = VECTOR('',#213758,1.); +#213758 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#213759 = ORIENTED_EDGE('',*,*,#213760,.T.); +#213760 = EDGE_CURVE('',#213753,#213761,#213763,.T.); +#213761 = VERTEX_POINT('',#213762); +#213762 = CARTESIAN_POINT('',(100.924255,-71.250929,1.585)); +#213763 = CIRCLE('',#213764,7.500005951702E-02); +#213764 = AXIS2_PLACEMENT_3D('',#213765,#213766,#213767); +#213765 = CARTESIAN_POINT('',(100.98569706294,-71.20791874739,1.585)); +#213766 = DIRECTION('',(0.,0.,-1.)); +#213767 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#213768 = ORIENTED_EDGE('',*,*,#213769,.T.); +#213769 = EDGE_CURVE('',#213761,#213770,#213772,.T.); +#213770 = VERTEX_POINT('',#213771); +#213771 = CARTESIAN_POINT('',(100.613315,-70.806728,1.585)); +#213772 = LINE('',#213773,#213774); +#213773 = CARTESIAN_POINT('',(100.924255,-71.250929,1.585)); +#213774 = VECTOR('',#213775,1.); +#213775 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#213776 = ORIENTED_EDGE('',*,*,#213777,.T.); +#213777 = EDGE_CURVE('',#213770,#213778,#213780,.T.); +#213778 = VERTEX_POINT('',#213779); +#213779 = CARTESIAN_POINT('',(100.489269,-70.806728,1.585)); +#213780 = LINE('',#213781,#213782); +#213781 = CARTESIAN_POINT('',(100.613315,-70.806728,1.585)); +#213782 = VECTOR('',#213783,1.); +#213783 = DIRECTION('',(-1.,0.,0.)); +#213784 = ORIENTED_EDGE('',*,*,#213785,.T.); +#213785 = EDGE_CURVE('',#213778,#213786,#213788,.T.); +#213786 = VERTEX_POINT('',#213787); +#213787 = CARTESIAN_POINT('',(100.487828,-71.222551,1.585)); +#213788 = LINE('',#213789,#213790); +#213789 = CARTESIAN_POINT('',(100.489269,-70.806728,1.585)); +#213790 = VECTOR('',#213791,1.); +#213791 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#213792 = ORIENTED_EDGE('',*,*,#213793,.T.); +#213793 = EDGE_CURVE('',#213786,#213794,#213796,.T.); +#213794 = VERTEX_POINT('',#213795); +#213795 = CARTESIAN_POINT('',(100.339269,-71.207919,1.585)); +#213796 = CIRCLE('',#213797,7.500006711463E-02); +#213797 = AXIS2_PLACEMENT_3D('',#213798,#213799,#213800); +#213798 = CARTESIAN_POINT('',(100.41426906711,-71.20791906711,1.585)); +#213799 = DIRECTION('',(-0.,0.,-1.)); +#213800 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#213801 = ORIENTED_EDGE('',*,*,#213802,.T.); +#213802 = EDGE_CURVE('',#213794,#213700,#213803,.T.); +#213803 = LINE('',#213804,#213805); +#213804 = CARTESIAN_POINT('',(100.339269,-71.207919,1.585)); +#213805 = VECTOR('',#213806,1.); +#213806 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#213807 = FACE_BOUND('',#213808,.F.); +#213808 = EDGE_LOOP('',(#213809,#213820,#213828,#213836,#213844,#213853) + ); +#213809 = ORIENTED_EDGE('',*,*,#213810,.T.); +#213810 = EDGE_CURVE('',#213811,#213813,#213815,.T.); +#213811 = VERTEX_POINT('',#213812); +#213812 = CARTESIAN_POINT('',(100.910697,-70.4161,1.585)); +#213813 = VERTEX_POINT('',#213814); +#213814 = CARTESIAN_POINT('',(100.777516,-70.282919,1.585)); +#213815 = CIRCLE('',#213816,0.18686440374); +#213816 = AXIS2_PLACEMENT_3D('',#213817,#213818,#213819); +#213817 = CARTESIAN_POINT('',(100.72998,-70.463636,1.585)); +#213818 = DIRECTION('',(0.,0.,1.)); +#213819 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#213820 = ORIENTED_EDGE('',*,*,#213821,.T.); +#213821 = EDGE_CURVE('',#213813,#213822,#213824,.T.); +#213822 = VERTEX_POINT('',#213823); +#213823 = CARTESIAN_POINT('',(100.489269,-70.282919,1.585)); +#213824 = LINE('',#213825,#213826); +#213825 = CARTESIAN_POINT('',(100.777516,-70.282919,1.585)); +#213826 = VECTOR('',#213827,1.); +#213827 = DIRECTION('',(-1.,0.,0.)); +#213828 = ORIENTED_EDGE('',*,*,#213829,.T.); +#213829 = EDGE_CURVE('',#213822,#213830,#213832,.T.); +#213830 = VERTEX_POINT('',#213831); +#213831 = CARTESIAN_POINT('',(100.489269,-70.656728,1.585)); +#213832 = LINE('',#213833,#213834); +#213833 = CARTESIAN_POINT('',(100.489269,-70.282919,1.585)); +#213834 = VECTOR('',#213835,1.); +#213835 = DIRECTION('',(0.,-1.,0.)); +#213836 = ORIENTED_EDGE('',*,*,#213837,.T.); +#213837 = EDGE_CURVE('',#213830,#213838,#213840,.T.); +#213838 = VERTEX_POINT('',#213839); +#213839 = CARTESIAN_POINT('',(100.777516,-70.656728,1.585)); +#213840 = LINE('',#213841,#213842); +#213841 = CARTESIAN_POINT('',(100.489269,-70.656728,1.585)); +#213842 = VECTOR('',#213843,1.); +#213843 = DIRECTION('',(1.,0.,0.)); +#213844 = ORIENTED_EDGE('',*,*,#213845,.T.); +#213845 = EDGE_CURVE('',#213838,#213846,#213848,.T.); +#213846 = VERTEX_POINT('',#213847); +#213847 = CARTESIAN_POINT('',(100.910697,-70.523547,1.585)); +#213848 = CIRCLE('',#213849,0.18686440374); +#213849 = AXIS2_PLACEMENT_3D('',#213850,#213851,#213852); +#213850 = CARTESIAN_POINT('',(100.72998,-70.476011,1.585)); +#213851 = DIRECTION('',(0.,0.,1.)); +#213852 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#213853 = ORIENTED_EDGE('',*,*,#213854,.T.); +#213854 = EDGE_CURVE('',#213846,#213811,#213855,.T.); +#213855 = LINE('',#213856,#213857); +#213856 = CARTESIAN_POINT('',(100.910697,-70.523547,1.585)); +#213857 = VECTOR('',#213858,1.); +#213858 = DIRECTION('',(0.,1.,0.)); +#213859 = PLANE('',#213860); +#213860 = AXIS2_PLACEMENT_3D('',#213861,#213862,#213863); +#213861 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213862 = DIRECTION('',(0.,0.,1.)); +#213863 = DIRECTION('',(1.,0.,-0.)); +#213864 = SHELL_BASED_SURFACE_MODEL('',(#213865)); +#213865 = OPEN_SHELL('',(#213866)); +#213866 = ADVANCED_FACE('',(#213867),#213919,.T.); +#213867 = FACE_BOUND('',#213868,.F.); +#213868 = EDGE_LOOP('',(#213869,#213880,#213888,#213897,#213905,#213913) + ); +#213869 = ORIENTED_EDGE('',*,*,#213870,.T.); +#213870 = EDGE_CURVE('',#213871,#213873,#213875,.T.); +#213871 = VERTEX_POINT('',#213872); +#213872 = CARTESIAN_POINT('',(101.372601,-70.478892,1.585)); +#213873 = VERTEX_POINT('',#213874); +#213874 = CARTESIAN_POINT('',(101.489269,-70.541252,1.585)); +#213875 = CIRCLE('',#213876,7.500000000002E-02); +#213876 = AXIS2_PLACEMENT_3D('',#213877,#213878,#213879); +#213877 = CARTESIAN_POINT('',(101.414269,-70.54125206555,1.585)); +#213878 = DIRECTION('',(0.,0.,-1.)); +#213879 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#213880 = ORIENTED_EDGE('',*,*,#213881,.T.); +#213881 = EDGE_CURVE('',#213873,#213882,#213884,.T.); +#213882 = VERTEX_POINT('',#213883); +#213883 = CARTESIAN_POINT('',(101.487828,-71.222551,1.585)); +#213884 = LINE('',#213885,#213886); +#213885 = CARTESIAN_POINT('',(101.489269,-70.541252,1.585)); +#213886 = VECTOR('',#213887,1.); +#213887 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#213888 = ORIENTED_EDGE('',*,*,#213889,.T.); +#213889 = EDGE_CURVE('',#213882,#213890,#213892,.T.); +#213890 = VERTEX_POINT('',#213891); +#213891 = CARTESIAN_POINT('',(101.339269,-71.207919,1.585)); +#213892 = CIRCLE('',#213893,7.500006711463E-02); +#213893 = AXIS2_PLACEMENT_3D('',#213894,#213895,#213896); +#213894 = CARTESIAN_POINT('',(101.41426906711,-71.20791906711,1.585)); +#213895 = DIRECTION('',(-0.,0.,-1.)); +#213896 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#213897 = ORIENTED_EDGE('',*,*,#213898,.T.); +#213898 = EDGE_CURVE('',#213890,#213899,#213901,.T.); +#213899 = VERTEX_POINT('',#213900); +#213900 = CARTESIAN_POINT('',(101.34071,-70.52662,1.585)); +#213901 = LINE('',#213902,#213903); +#213902 = CARTESIAN_POINT('',(101.339269,-71.207919,1.585)); +#213903 = VECTOR('',#213904,1.); +#213904 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#213905 = ORIENTED_EDGE('',*,*,#213906,.T.); +#213906 = EDGE_CURVE('',#213899,#213907,#213909,.T.); +#213907 = VERTEX_POINT('',#213908); +#213908 = CARTESIAN_POINT('',(101.351909,-70.499584,1.585)); +#213909 = LINE('',#213910,#213911); +#213910 = CARTESIAN_POINT('',(101.34071,-70.52662,1.585)); +#213911 = VECTOR('',#213912,1.); +#213912 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#213913 = ORIENTED_EDGE('',*,*,#213914,.T.); +#213914 = EDGE_CURVE('',#213907,#213871,#213915,.T.); +#213915 = LINE('',#213916,#213917); +#213916 = CARTESIAN_POINT('',(101.351909,-70.499584,1.585)); +#213917 = VECTOR('',#213918,1.); +#213918 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#213919 = PLANE('',#213920); +#213920 = AXIS2_PLACEMENT_3D('',#213921,#213922,#213923); +#213921 = CARTESIAN_POINT('',(0.,0.,1.585)); +#213922 = DIRECTION('',(0.,0.,1.)); +#213923 = DIRECTION('',(1.,0.,-0.)); +#213924 = SHELL_BASED_SURFACE_MODEL('',(#213925)); +#213925 = OPEN_SHELL('',(#213926)); +#213926 = ADVANCED_FACE('',(#213927),#214052,.T.); +#213927 = FACE_BOUND('',#213928,.F.); +#213928 = EDGE_LOOP('',(#213929,#213939,#213947,#213956,#213964,#213973, + #213981,#213989,#213997,#214005,#214014,#214022,#214030,#214038, + #214046)); +#213929 = ORIENTED_EDGE('',*,*,#213930,.T.); +#213930 = EDGE_CURVE('',#213931,#213933,#213935,.T.); +#213931 = VERTEX_POINT('',#213932); +#213932 = CARTESIAN_POINT('',(87.323126,-68.357667,1.585)); +#213933 = VERTEX_POINT('',#213934); +#213934 = CARTESIAN_POINT('',(87.346087,-68.3531,1.585)); +#213935 = LINE('',#213936,#213937); +#213936 = CARTESIAN_POINT('',(87.323126,-68.357667,1.585)); +#213937 = VECTOR('',#213938,1.); +#213938 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#213939 = ORIENTED_EDGE('',*,*,#213940,.T.); +#213940 = EDGE_CURVE('',#213933,#213941,#213943,.T.); +#213941 = VERTEX_POINT('',#213942); +#213942 = CARTESIAN_POINT('',(93.10165,-68.3531,1.585)); +#213943 = LINE('',#213944,#213945); +#213944 = CARTESIAN_POINT('',(87.346087,-68.3531,1.585)); +#213945 = VECTOR('',#213946,1.); +#213946 = DIRECTION('',(1.,0.,0.)); +#213947 = ORIENTED_EDGE('',*,*,#213948,.T.); +#213948 = EDGE_CURVE('',#213941,#213949,#213951,.T.); +#213949 = VERTEX_POINT('',#213950); +#213950 = CARTESIAN_POINT('',(93.16165,-68.4131,1.585)); +#213951 = CIRCLE('',#213952,5.99993201626E-02); +#213952 = AXIS2_PLACEMENT_3D('',#213953,#213954,#213955); +#213953 = CARTESIAN_POINT('',(93.101650679841,-68.41309932015,1.585)); +#213954 = DIRECTION('',(0.,0.,-1.)); +#213955 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#213956 = ORIENTED_EDGE('',*,*,#213957,.T.); +#213957 = EDGE_CURVE('',#213949,#213958,#213960,.T.); +#213958 = VERTEX_POINT('',#213959); +#213959 = CARTESIAN_POINT('',(93.16165,-70.7631,1.585)); +#213960 = LINE('',#213961,#213962); +#213961 = CARTESIAN_POINT('',(93.16165,-68.4131,1.585)); +#213962 = VECTOR('',#213963,1.); +#213963 = DIRECTION('',(0.,-1.,0.)); +#213964 = ORIENTED_EDGE('',*,*,#213965,.T.); +#213965 = EDGE_CURVE('',#213958,#213966,#213968,.T.); +#213966 = VERTEX_POINT('',#213967); +#213967 = CARTESIAN_POINT('',(93.04165,-70.7631,1.585)); +#213968 = CIRCLE('',#213969,6.000000000042E-02); +#213969 = AXIS2_PLACEMENT_3D('',#213970,#213971,#213972); +#213970 = CARTESIAN_POINT('',(93.10165,-70.76310022558,1.585)); +#213971 = DIRECTION('',(0.,0.,-1.)); +#213972 = DIRECTION('',(0.999999999993,3.759794490532E-06,0.)); +#213973 = ORIENTED_EDGE('',*,*,#213974,.T.); +#213974 = EDGE_CURVE('',#213966,#213975,#213977,.T.); +#213975 = VERTEX_POINT('',#213976); +#213976 = CARTESIAN_POINT('',(93.04165,-68.4731,1.585)); +#213977 = LINE('',#213978,#213979); +#213978 = CARTESIAN_POINT('',(93.04165,-70.7631,1.585)); +#213979 = VECTOR('',#213980,1.); +#213980 = DIRECTION('',(0.,1.,0.)); +#213981 = ORIENTED_EDGE('',*,*,#213982,.T.); +#213982 = EDGE_CURVE('',#213975,#213983,#213985,.T.); +#213983 = VERTEX_POINT('',#213984); +#213984 = CARTESIAN_POINT('',(87.37094,-68.4731,1.585)); +#213985 = LINE('',#213986,#213987); +#213986 = CARTESIAN_POINT('',(93.04165,-68.4731,1.585)); +#213987 = VECTOR('',#213988,1.); +#213988 = DIRECTION('',(-1.,0.,0.)); +#213989 = ORIENTED_EDGE('',*,*,#213990,.T.); +#213990 = EDGE_CURVE('',#213983,#213991,#213993,.T.); +#213991 = VERTEX_POINT('',#213992); +#213992 = CARTESIAN_POINT('',(86.34165,-69.502389,1.585)); +#213993 = LINE('',#213994,#213995); +#213994 = CARTESIAN_POINT('',(87.37094,-68.4731,1.585)); +#213995 = VECTOR('',#213996,1.); +#213996 = DIRECTION('',(-0.707107124679,-0.707106437694,0.)); +#213997 = ORIENTED_EDGE('',*,*,#213998,.T.); +#213998 = EDGE_CURVE('',#213991,#213999,#214001,.T.); +#213999 = VERTEX_POINT('',#214000); +#214000 = CARTESIAN_POINT('',(86.34165,-70.7631,1.585)); +#214001 = LINE('',#214002,#214003); +#214002 = CARTESIAN_POINT('',(86.34165,-69.502389,1.585)); +#214003 = VECTOR('',#214004,1.); +#214004 = DIRECTION('',(0.,-1.,0.)); +#214005 = ORIENTED_EDGE('',*,*,#214006,.T.); +#214006 = EDGE_CURVE('',#213999,#214007,#214009,.T.); +#214007 = VERTEX_POINT('',#214008); +#214008 = CARTESIAN_POINT('',(86.22165,-70.7631,1.585)); +#214009 = CIRCLE('',#214010,6.000000000043E-02); +#214010 = AXIS2_PLACEMENT_3D('',#214011,#214012,#214013); +#214011 = CARTESIAN_POINT('',(86.28165,-70.76310022558,1.585)); +#214012 = DIRECTION('',(0.,0.,-1.)); +#214013 = DIRECTION('',(0.999999999993,3.759794253683E-06,0.)); +#214014 = ORIENTED_EDGE('',*,*,#214015,.T.); +#214015 = EDGE_CURVE('',#214007,#214016,#214018,.T.); +#214016 = VERTEX_POINT('',#214017); +#214017 = CARTESIAN_POINT('',(86.22165,-69.477537,1.585)); +#214018 = LINE('',#214019,#214020); +#214019 = CARTESIAN_POINT('',(86.22165,-70.7631,1.585)); +#214020 = VECTOR('',#214021,1.); +#214021 = DIRECTION('',(0.,1.,0.)); +#214022 = ORIENTED_EDGE('',*,*,#214023,.T.); +#214023 = EDGE_CURVE('',#214016,#214024,#214026,.T.); +#214024 = VERTEX_POINT('',#214025); +#214025 = CARTESIAN_POINT('',(86.226217,-69.454576,1.585)); +#214026 = LINE('',#214027,#214028); +#214027 = CARTESIAN_POINT('',(86.22165,-69.477537,1.585)); +#214028 = VECTOR('',#214029,1.); +#214029 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#214030 = ORIENTED_EDGE('',*,*,#214031,.T.); +#214031 = EDGE_CURVE('',#214024,#214032,#214034,.T.); +#214032 = VERTEX_POINT('',#214033); +#214033 = CARTESIAN_POINT('',(86.239224,-69.435111,1.585)); +#214034 = LINE('',#214035,#214036); +#214035 = CARTESIAN_POINT('',(86.226217,-69.454576,1.585)); +#214036 = VECTOR('',#214037,1.); +#214037 = DIRECTION('',(0.555596893534,0.831451797698,0.)); +#214038 = ORIENTED_EDGE('',*,*,#214039,.T.); +#214039 = EDGE_CURVE('',#214032,#214040,#214042,.T.); +#214040 = VERTEX_POINT('',#214041); +#214041 = CARTESIAN_POINT('',(87.30366,-68.370674,1.585)); +#214042 = LINE('',#214043,#214044); +#214043 = CARTESIAN_POINT('',(86.239224,-69.435111,1.585)); +#214044 = VECTOR('',#214045,1.); +#214045 = DIRECTION('',(0.707106449036,0.707107113337,0.)); +#214046 = ORIENTED_EDGE('',*,*,#214047,.T.); +#214047 = EDGE_CURVE('',#214040,#213931,#214048,.T.); +#214048 = LINE('',#214049,#214050); +#214049 = CARTESIAN_POINT('',(87.30366,-68.370674,1.585)); +#214050 = VECTOR('',#214051,1.); +#214051 = DIRECTION('',(0.831464982668,0.555577161695,0.)); +#214052 = PLANE('',#214053); +#214053 = AXIS2_PLACEMENT_3D('',#214054,#214055,#214056); +#214054 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214055 = DIRECTION('',(0.,0.,1.)); +#214056 = DIRECTION('',(1.,0.,-0.)); +#214057 = SHELL_BASED_SURFACE_MODEL('',(#214058)); +#214058 = OPEN_SHELL('',(#214059)); +#214059 = ADVANCED_FACE('',(#214060,#214171),#214230,.T.); +#214060 = FACE_BOUND('',#214061,.F.); +#214061 = EDGE_LOOP('',(#214062,#214072,#214081,#214089,#214097,#214105, + #214114,#214122,#214131,#214139,#214148,#214156,#214165)); +#214062 = ORIENTED_EDGE('',*,*,#214063,.T.); +#214063 = EDGE_CURVE('',#214064,#214066,#214068,.T.); +#214064 = VERTEX_POINT('',#214065); +#214065 = CARTESIAN_POINT('',(179.850168,-70.155317,1.585)); +#214066 = VERTEX_POINT('',#214067); +#214067 = CARTESIAN_POINT('',(180.221273,-69.897304,1.585)); +#214068 = LINE('',#214069,#214070); +#214069 = CARTESIAN_POINT('',(179.850168,-70.155317,1.585)); +#214070 = VECTOR('',#214071,1.); +#214071 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#214072 = ORIENTED_EDGE('',*,*,#214073,.T.); +#214073 = EDGE_CURVE('',#214066,#214074,#214076,.T.); +#214074 = VERTEX_POINT('',#214075); +#214075 = CARTESIAN_POINT('',(180.294479,-70.027399,1.585)); +#214076 = CIRCLE('',#214077,7.500005951702E-02); +#214077 = AXIS2_PLACEMENT_3D('',#214078,#214079,#214080); +#214078 = CARTESIAN_POINT('',(180.25146874739,-69.96595693705,1.585)); +#214079 = DIRECTION('',(0.,0.,-1.)); +#214080 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#214081 = ORIENTED_EDGE('',*,*,#214082,.T.); +#214082 = EDGE_CURVE('',#214074,#214083,#214085,.T.); +#214083 = VERTEX_POINT('',#214084); +#214084 = CARTESIAN_POINT('',(179.850278,-70.338339,1.585)); +#214085 = LINE('',#214086,#214087); +#214086 = CARTESIAN_POINT('',(180.294479,-70.027399,1.585)); +#214087 = VECTOR('',#214088,1.); +#214088 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#214089 = ORIENTED_EDGE('',*,*,#214090,.T.); +#214090 = EDGE_CURVE('',#214083,#214091,#214093,.T.); +#214091 = VERTEX_POINT('',#214092); +#214092 = CARTESIAN_POINT('',(179.850278,-70.462385,1.585)); +#214093 = LINE('',#214094,#214095); +#214094 = CARTESIAN_POINT('',(179.850278,-70.338339,1.585)); +#214095 = VECTOR('',#214096,1.); +#214096 = DIRECTION('',(0.,-1.,0.)); +#214097 = ORIENTED_EDGE('',*,*,#214098,.T.); +#214098 = EDGE_CURVE('',#214091,#214099,#214101,.T.); +#214099 = VERTEX_POINT('',#214100); +#214100 = CARTESIAN_POINT('',(180.266101,-70.463826,1.585)); +#214101 = LINE('',#214102,#214103); +#214102 = CARTESIAN_POINT('',(179.850278,-70.462385,1.585)); +#214103 = VECTOR('',#214104,1.); +#214104 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#214105 = ORIENTED_EDGE('',*,*,#214106,.T.); +#214106 = EDGE_CURVE('',#214099,#214107,#214109,.T.); +#214107 = VERTEX_POINT('',#214108); +#214108 = CARTESIAN_POINT('',(180.251469,-70.612385,1.585)); +#214109 = CIRCLE('',#214110,7.500006711463E-02); +#214110 = AXIS2_PLACEMENT_3D('',#214111,#214112,#214113); +#214111 = CARTESIAN_POINT('',(180.25146906711,-70.53738493288,1.585)); +#214112 = DIRECTION('',(0.,0.,-1.)); +#214113 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#214114 = ORIENTED_EDGE('',*,*,#214115,.T.); +#214115 = EDGE_CURVE('',#214107,#214116,#214118,.T.); +#214116 = VERTEX_POINT('',#214117); +#214117 = CARTESIAN_POINT('',(179.236837,-70.610944,1.585)); +#214118 = LINE('',#214119,#214120); +#214119 = CARTESIAN_POINT('',(180.251469,-70.612385,1.585)); +#214120 = VECTOR('',#214121,1.); +#214121 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#214122 = ORIENTED_EDGE('',*,*,#214123,.T.); +#214123 = EDGE_CURVE('',#214116,#214124,#214126,.T.); +#214124 = VERTEX_POINT('',#214125); +#214125 = CARTESIAN_POINT('',(179.176469,-70.537385,1.585)); +#214126 = CIRCLE('',#214127,7.500074938986E-02); +#214127 = AXIS2_PLACEMENT_3D('',#214128,#214129,#214130); +#214128 = CARTESIAN_POINT('',(179.25146974938,-70.53738453389,1.585)); +#214129 = DIRECTION('',(0.,0.,-1.)); +#214130 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#214131 = ORIENTED_EDGE('',*,*,#214132,.T.); +#214132 = EDGE_CURVE('',#214124,#214133,#214135,.T.); +#214133 = VERTEX_POINT('',#214134); +#214134 = CARTESIAN_POINT('',(179.179132,-70.136624,1.585)); +#214135 = LINE('',#214136,#214137); +#214136 = CARTESIAN_POINT('',(179.176469,-70.537385,1.585)); +#214137 = VECTOR('',#214138,1.); +#214138 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#214139 = ORIENTED_EDGE('',*,*,#214140,.T.); +#214140 = EDGE_CURVE('',#214133,#214141,#214143,.T.); +#214141 = VERTEX_POINT('',#214142); +#214142 = CARTESIAN_POINT('',(179.427313,-69.892398,1.585)); +#214143 = CIRCLE('',#214144,0.3486213829); +#214144 = AXIS2_PLACEMENT_3D('',#214145,#214146,#214147); +#214145 = CARTESIAN_POINT('',(179.51507322951,-70.22979244383,1.585)); +#214146 = DIRECTION('',(0.,0.,-1.)); +#214147 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#214148 = ORIENTED_EDGE('',*,*,#214149,.T.); +#214149 = EDGE_CURVE('',#214141,#214150,#214152,.T.); +#214150 = VERTEX_POINT('',#214151); +#214151 = CARTESIAN_POINT('',(179.599434,-69.892398,1.585)); +#214152 = LINE('',#214153,#214154); +#214153 = CARTESIAN_POINT('',(179.427313,-69.892398,1.585)); +#214154 = VECTOR('',#214155,1.); +#214155 = DIRECTION('',(1.,0.,0.)); +#214156 = ORIENTED_EDGE('',*,*,#214157,.T.); +#214157 = EDGE_CURVE('',#214150,#214158,#214160,.T.); +#214158 = VERTEX_POINT('',#214159); +#214159 = CARTESIAN_POINT('',(179.848837,-70.141801,1.585)); +#214160 = CIRCLE('',#214161,0.347870264855); +#214161 = AXIS2_PLACEMENT_3D('',#214162,#214163,#214164); +#214162 = CARTESIAN_POINT('',(179.51210626502,-70.22912873497,1.585)); +#214163 = DIRECTION('',(0.,0.,-1.)); +#214164 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#214165 = ORIENTED_EDGE('',*,*,#214166,.T.); +#214166 = EDGE_CURVE('',#214158,#214064,#214167,.T.); +#214167 = LINE('',#214168,#214169); +#214168 = CARTESIAN_POINT('',(179.848837,-70.141801,1.585)); +#214169 = VECTOR('',#214170,1.); +#214170 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#214171 = FACE_BOUND('',#214172,.F.); +#214172 = EDGE_LOOP('',(#214173,#214184,#214192,#214200,#214208,#214216, + #214224)); +#214173 = ORIENTED_EDGE('',*,*,#214174,.T.); +#214174 = EDGE_CURVE('',#214175,#214177,#214179,.T.); +#214175 = VERTEX_POINT('',#214176); +#214176 = CARTESIAN_POINT('',(179.635613,-70.075215,1.585)); +#214177 = VERTEX_POINT('',#214178); +#214178 = CARTESIAN_POINT('',(179.360727,-70.105622,1.585)); +#214179 = CIRCLE('',#214180,0.198386215365); +#214180 = AXIS2_PLACEMENT_3D('',#214181,#214182,#214183); +#214181 = CARTESIAN_POINT('',(179.51380995783,-70.2318071753,1.585)); +#214182 = DIRECTION('',(0.,0.,1.)); +#214183 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#214184 = ORIENTED_EDGE('',*,*,#214185,.T.); +#214185 = EDGE_CURVE('',#214177,#214186,#214188,.T.); +#214186 = VERTEX_POINT('',#214187); +#214187 = CARTESIAN_POINT('',(179.326469,-70.174138,1.585)); +#214188 = LINE('',#214189,#214190); +#214189 = CARTESIAN_POINT('',(179.360727,-70.105622,1.585)); +#214190 = VECTOR('',#214191,1.); +#214191 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#214192 = ORIENTED_EDGE('',*,*,#214193,.T.); +#214193 = EDGE_CURVE('',#214186,#214194,#214196,.T.); +#214194 = VERTEX_POINT('',#214195); +#214195 = CARTESIAN_POINT('',(179.326469,-70.462385,1.585)); +#214196 = LINE('',#214197,#214198); +#214197 = CARTESIAN_POINT('',(179.326469,-70.174138,1.585)); +#214198 = VECTOR('',#214199,1.); +#214199 = DIRECTION('',(0.,-1.,0.)); +#214200 = ORIENTED_EDGE('',*,*,#214201,.T.); +#214201 = EDGE_CURVE('',#214194,#214202,#214204,.T.); +#214202 = VERTEX_POINT('',#214203); +#214203 = CARTESIAN_POINT('',(179.700278,-70.462385,1.585)); +#214204 = LINE('',#214205,#214206); +#214205 = CARTESIAN_POINT('',(179.326469,-70.462385,1.585)); +#214206 = VECTOR('',#214207,1.); +#214207 = DIRECTION('',(1.,0.,0.)); +#214208 = ORIENTED_EDGE('',*,*,#214209,.T.); +#214209 = EDGE_CURVE('',#214202,#214210,#214212,.T.); +#214210 = VERTEX_POINT('',#214211); +#214211 = CARTESIAN_POINT('',(179.700278,-70.174138,1.585)); +#214212 = LINE('',#214213,#214214); +#214213 = CARTESIAN_POINT('',(179.700278,-70.462385,1.585)); +#214214 = VECTOR('',#214215,1.); +#214215 = DIRECTION('',(0.,1.,0.)); +#214216 = ORIENTED_EDGE('',*,*,#214217,.T.); +#214217 = EDGE_CURVE('',#214210,#214218,#214220,.T.); +#214218 = VERTEX_POINT('',#214219); +#214219 = CARTESIAN_POINT('',(179.66602,-70.105622,1.585)); +#214220 = LINE('',#214221,#214222); +#214221 = CARTESIAN_POINT('',(179.700278,-70.174138,1.585)); +#214222 = VECTOR('',#214223,1.); +#214223 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#214224 = ORIENTED_EDGE('',*,*,#214225,.T.); +#214225 = EDGE_CURVE('',#214218,#214175,#214226,.T.); +#214226 = LINE('',#214227,#214228); +#214227 = CARTESIAN_POINT('',(179.66602,-70.105622,1.585)); +#214228 = VECTOR('',#214229,1.); +#214229 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#214230 = PLANE('',#214231); +#214231 = AXIS2_PLACEMENT_3D('',#214232,#214233,#214234); +#214232 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214233 = DIRECTION('',(0.,0.,1.)); +#214234 = DIRECTION('',(1.,0.,-0.)); +#214235 = SHELL_BASED_SURFACE_MODEL('',(#214236)); +#214236 = OPEN_SHELL('',(#214237)); +#214237 = ADVANCED_FACE('',(#214238),#214348,.T.); +#214238 = FACE_BOUND('',#214239,.F.); +#214239 = EDGE_LOOP('',(#214240,#214251,#214259,#214267,#214276,#214284, + #214292,#214301,#214309,#214317,#214326,#214334,#214342)); +#214240 = ORIENTED_EDGE('',*,*,#214241,.T.); +#214241 = EDGE_CURVE('',#214242,#214244,#214246,.T.); +#214242 = VERTEX_POINT('',#214243); +#214243 = CARTESIAN_POINT('',(85.592467,-69.558889,1.585)); +#214244 = VERTEX_POINT('',#214245); +#214245 = CARTESIAN_POINT('',(85.7079,-69.58185,1.585)); +#214246 = CIRCLE('',#214247,6.000007318647E-02); +#214247 = AXIS2_PLACEMENT_3D('',#214248,#214249,#214250); +#214248 = CARTESIAN_POINT('',(85.647899926814,-69.58184982331,1.585)); +#214249 = DIRECTION('',(0.,0.,-1.)); +#214250 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#214251 = ORIENTED_EDGE('',*,*,#214252,.T.); +#214252 = EDGE_CURVE('',#214244,#214253,#214255,.T.); +#214253 = VERTEX_POINT('',#214254); +#214254 = CARTESIAN_POINT('',(85.7079,-69.9156,1.585)); +#214255 = LINE('',#214256,#214257); +#214256 = CARTESIAN_POINT('',(85.7079,-69.58185,1.585)); +#214257 = VECTOR('',#214258,1.); +#214258 = DIRECTION('',(0.,-1.,0.)); +#214259 = ORIENTED_EDGE('',*,*,#214260,.T.); +#214260 = EDGE_CURVE('',#214253,#214261,#214263,.T.); +#214261 = VERTEX_POINT('',#214262); +#214262 = CARTESIAN_POINT('',(86.04165,-69.9156,1.585)); +#214263 = LINE('',#214264,#214265); +#214264 = CARTESIAN_POINT('',(85.7079,-69.9156,1.585)); +#214265 = VECTOR('',#214266,1.); +#214266 = DIRECTION('',(1.,0.,0.)); +#214267 = ORIENTED_EDGE('',*,*,#214268,.T.); +#214268 = EDGE_CURVE('',#214261,#214269,#214271,.T.); +#214269 = VERTEX_POINT('',#214270); +#214270 = CARTESIAN_POINT('',(86.04165,-70.0356,1.585)); +#214271 = CIRCLE('',#214272,6.000000000043E-02); +#214272 = AXIS2_PLACEMENT_3D('',#214273,#214274,#214275); +#214273 = CARTESIAN_POINT('',(86.041650225588,-69.9756,1.585)); +#214274 = DIRECTION('',(0.,0.,-1.)); +#214275 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#214276 = ORIENTED_EDGE('',*,*,#214277,.T.); +#214277 = EDGE_CURVE('',#214269,#214278,#214280,.T.); +#214278 = VERTEX_POINT('',#214279); +#214279 = CARTESIAN_POINT('',(85.7079,-70.0356,1.585)); +#214280 = LINE('',#214281,#214282); +#214281 = CARTESIAN_POINT('',(86.04165,-70.0356,1.585)); +#214282 = VECTOR('',#214283,1.); +#214283 = DIRECTION('',(-1.,0.,0.)); +#214284 = ORIENTED_EDGE('',*,*,#214285,.T.); +#214285 = EDGE_CURVE('',#214278,#214286,#214288,.T.); +#214286 = VERTEX_POINT('',#214287); +#214287 = CARTESIAN_POINT('',(85.7079,-70.36935,1.585)); +#214288 = LINE('',#214289,#214290); +#214289 = CARTESIAN_POINT('',(85.7079,-70.0356,1.585)); +#214290 = VECTOR('',#214291,1.); +#214291 = DIRECTION('',(0.,-1.,0.)); +#214292 = ORIENTED_EDGE('',*,*,#214293,.T.); +#214293 = EDGE_CURVE('',#214286,#214294,#214296,.T.); +#214294 = VERTEX_POINT('',#214295); +#214295 = CARTESIAN_POINT('',(85.5879,-70.36935,1.585)); +#214296 = CIRCLE('',#214297,6.000000000042E-02); +#214297 = AXIS2_PLACEMENT_3D('',#214298,#214299,#214300); +#214298 = CARTESIAN_POINT('',(85.6479,-70.36935022558,1.585)); +#214299 = DIRECTION('',(0.,0.,-1.)); +#214300 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#214301 = ORIENTED_EDGE('',*,*,#214302,.T.); +#214302 = EDGE_CURVE('',#214294,#214303,#214305,.T.); +#214303 = VERTEX_POINT('',#214304); +#214304 = CARTESIAN_POINT('',(85.5879,-70.0356,1.585)); +#214305 = LINE('',#214306,#214307); +#214306 = CARTESIAN_POINT('',(85.5879,-70.36935,1.585)); +#214307 = VECTOR('',#214308,1.); +#214308 = DIRECTION('',(0.,1.,0.)); +#214309 = ORIENTED_EDGE('',*,*,#214310,.T.); +#214310 = EDGE_CURVE('',#214303,#214311,#214313,.T.); +#214311 = VERTEX_POINT('',#214312); +#214312 = CARTESIAN_POINT('',(85.25415,-70.0356,1.585)); +#214313 = LINE('',#214314,#214315); +#214314 = CARTESIAN_POINT('',(85.5879,-70.0356,1.585)); +#214315 = VECTOR('',#214316,1.); +#214316 = DIRECTION('',(-1.,0.,0.)); +#214317 = ORIENTED_EDGE('',*,*,#214318,.T.); +#214318 = EDGE_CURVE('',#214311,#214319,#214321,.T.); +#214319 = VERTEX_POINT('',#214320); +#214320 = CARTESIAN_POINT('',(85.25415,-69.9156,1.585)); +#214321 = CIRCLE('',#214322,6.000000000043E-02); +#214322 = AXIS2_PLACEMENT_3D('',#214323,#214324,#214325); +#214323 = CARTESIAN_POINT('',(85.254149774412,-69.9756,1.585)); +#214324 = DIRECTION('',(0.,0.,-1.)); +#214325 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#214326 = ORIENTED_EDGE('',*,*,#214327,.T.); +#214327 = EDGE_CURVE('',#214319,#214328,#214330,.T.); +#214328 = VERTEX_POINT('',#214329); +#214329 = CARTESIAN_POINT('',(85.5879,-69.9156,1.585)); +#214330 = LINE('',#214331,#214332); +#214331 = CARTESIAN_POINT('',(85.25415,-69.9156,1.585)); +#214332 = VECTOR('',#214333,1.); +#214333 = DIRECTION('',(1.,0.,0.)); +#214334 = ORIENTED_EDGE('',*,*,#214335,.T.); +#214335 = EDGE_CURVE('',#214328,#214336,#214338,.T.); +#214336 = VERTEX_POINT('',#214337); +#214337 = CARTESIAN_POINT('',(85.5879,-69.58185,1.585)); +#214338 = LINE('',#214339,#214340); +#214339 = CARTESIAN_POINT('',(85.5879,-69.9156,1.585)); +#214340 = VECTOR('',#214341,1.); +#214341 = DIRECTION('',(0.,1.,0.)); +#214342 = ORIENTED_EDGE('',*,*,#214343,.T.); +#214343 = EDGE_CURVE('',#214336,#214242,#214344,.T.); +#214344 = LINE('',#214345,#214346); +#214345 = CARTESIAN_POINT('',(85.5879,-69.58185,1.585)); +#214346 = VECTOR('',#214347,1.); +#214347 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#214348 = PLANE('',#214349); +#214349 = AXIS2_PLACEMENT_3D('',#214350,#214351,#214352); +#214350 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214351 = DIRECTION('',(0.,0.,1.)); +#214352 = DIRECTION('',(1.,0.,-0.)); +#214353 = SHELL_BASED_SURFACE_MODEL('',(#214354)); +#214354 = OPEN_SHELL('',(#214355)); +#214355 = ADVANCED_FACE('',(#214356,#214441),#214500,.T.); +#214356 = FACE_BOUND('',#214357,.F.); +#214357 = EDGE_LOOP('',(#214358,#214369,#214377,#214385,#214393,#214402, + #214410,#214419,#214427,#214435)); +#214358 = ORIENTED_EDGE('',*,*,#214359,.T.); +#214359 = EDGE_CURVE('',#214360,#214362,#214364,.T.); +#214360 = VERTEX_POINT('',#214361); +#214361 = CARTESIAN_POINT('',(206.126866,-69.724267,1.585)); +#214362 = VERTEX_POINT('',#214363); +#214363 = CARTESIAN_POINT('',(206.610776,-69.795163,1.585)); +#214364 = CIRCLE('',#214365,0.34461174713); +#214365 = AXIS2_PLACEMENT_3D('',#214366,#214367,#214368); +#214366 = CARTESIAN_POINT('',(206.33362294377,-69.99996397579,1.585)); +#214367 = DIRECTION('',(0.,0.,-1.)); +#214368 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#214369 = ORIENTED_EDGE('',*,*,#214370,.T.); +#214370 = EDGE_CURVE('',#214362,#214371,#214373,.T.); +#214371 = VERTEX_POINT('',#214372); +#214372 = CARTESIAN_POINT('',(206.668837,-69.91561,1.585)); +#214373 = LINE('',#214374,#214375); +#214374 = CARTESIAN_POINT('',(206.610776,-69.795163,1.585)); +#214375 = VECTOR('',#214376,1.); +#214376 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#214377 = ORIENTED_EDGE('',*,*,#214378,.T.); +#214378 = EDGE_CURVE('',#214371,#214379,#214381,.T.); +#214379 = VERTEX_POINT('',#214380); +#214380 = CARTESIAN_POINT('',(206.670278,-70.236194,1.585)); +#214381 = LINE('',#214382,#214383); +#214382 = CARTESIAN_POINT('',(206.668837,-69.91561,1.585)); +#214383 = VECTOR('',#214384,1.); +#214384 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#214385 = ORIENTED_EDGE('',*,*,#214386,.T.); +#214386 = EDGE_CURVE('',#214379,#214387,#214389,.T.); +#214387 = VERTEX_POINT('',#214388); +#214388 = CARTESIAN_POINT('',(207.086101,-70.237635,1.585)); +#214389 = LINE('',#214390,#214391); +#214390 = CARTESIAN_POINT('',(206.670278,-70.236194,1.585)); +#214391 = VECTOR('',#214392,1.); +#214392 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#214393 = ORIENTED_EDGE('',*,*,#214394,.T.); +#214394 = EDGE_CURVE('',#214387,#214395,#214397,.T.); +#214395 = VERTEX_POINT('',#214396); +#214396 = CARTESIAN_POINT('',(207.071469,-70.386194,1.585)); +#214397 = CIRCLE('',#214398,7.500006711464E-02); +#214398 = AXIS2_PLACEMENT_3D('',#214399,#214400,#214401); +#214399 = CARTESIAN_POINT('',(207.07146906711,-70.31119393288,1.585)); +#214400 = DIRECTION('',(0.,0.,-1.)); +#214401 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#214402 = ORIENTED_EDGE('',*,*,#214403,.T.); +#214403 = EDGE_CURVE('',#214395,#214404,#214406,.T.); +#214404 = VERTEX_POINT('',#214405); +#214405 = CARTESIAN_POINT('',(206.056837,-70.384753,1.585)); +#214406 = LINE('',#214407,#214408); +#214407 = CARTESIAN_POINT('',(207.071469,-70.386194,1.585)); +#214408 = VECTOR('',#214409,1.); +#214409 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#214410 = ORIENTED_EDGE('',*,*,#214411,.T.); +#214411 = EDGE_CURVE('',#214404,#214412,#214414,.T.); +#214412 = VERTEX_POINT('',#214413); +#214413 = CARTESIAN_POINT('',(205.996469,-70.311194,1.585)); +#214414 = CIRCLE('',#214415,7.500074938986E-02); +#214415 = AXIS2_PLACEMENT_3D('',#214416,#214417,#214418); +#214416 = CARTESIAN_POINT('',(206.07146974938,-70.31119353389,1.585)); +#214417 = DIRECTION('',(0.,0.,-1.)); +#214418 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#214419 = ORIENTED_EDGE('',*,*,#214420,.T.); +#214420 = EDGE_CURVE('',#214412,#214421,#214423,.T.); +#214421 = VERTEX_POINT('',#214422); +#214422 = CARTESIAN_POINT('',(205.999132,-69.910433,1.585)); +#214423 = LINE('',#214424,#214425); +#214424 = CARTESIAN_POINT('',(205.996469,-70.311194,1.585)); +#214425 = VECTOR('',#214426,1.); +#214426 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#214427 = ORIENTED_EDGE('',*,*,#214428,.T.); +#214428 = EDGE_CURVE('',#214421,#214429,#214431,.T.); +#214429 = VERTEX_POINT('',#214430); +#214430 = CARTESIAN_POINT('',(206.061336,-69.78772,1.585)); +#214431 = LINE('',#214432,#214433); +#214432 = CARTESIAN_POINT('',(205.999132,-69.910433,1.585)); +#214433 = VECTOR('',#214434,1.); +#214434 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#214435 = ORIENTED_EDGE('',*,*,#214436,.T.); +#214436 = EDGE_CURVE('',#214429,#214360,#214437,.T.); +#214437 = LINE('',#214438,#214439); +#214438 = CARTESIAN_POINT('',(206.061336,-69.78772,1.585)); +#214439 = VECTOR('',#214440,1.); +#214440 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#214441 = FACE_BOUND('',#214442,.F.); +#214442 = EDGE_LOOP('',(#214443,#214454,#214462,#214470,#214478,#214486, + #214494)); +#214443 = ORIENTED_EDGE('',*,*,#214444,.T.); +#214444 = EDGE_CURVE('',#214445,#214447,#214449,.T.); +#214445 = VERTEX_POINT('',#214446); +#214446 = CARTESIAN_POINT('',(206.455613,-69.849024,1.585)); +#214447 = VERTEX_POINT('',#214448); +#214448 = CARTESIAN_POINT('',(206.180727,-69.879431,1.585)); +#214449 = CIRCLE('',#214450,0.198386215365); +#214450 = AXIS2_PLACEMENT_3D('',#214451,#214452,#214453); +#214451 = CARTESIAN_POINT('',(206.33380995783,-70.0056161753,1.585)); +#214452 = DIRECTION('',(0.,0.,1.)); +#214453 = DIRECTION('',(0.61396928178,0.789329919002,-0.)); +#214454 = ORIENTED_EDGE('',*,*,#214455,.T.); +#214455 = EDGE_CURVE('',#214447,#214456,#214458,.T.); +#214456 = VERTEX_POINT('',#214457); +#214457 = CARTESIAN_POINT('',(206.146469,-69.947947,1.585)); +#214458 = LINE('',#214459,#214460); +#214459 = CARTESIAN_POINT('',(206.180727,-69.879431,1.585)); +#214460 = VECTOR('',#214461,1.); +#214461 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#214462 = ORIENTED_EDGE('',*,*,#214463,.T.); +#214463 = EDGE_CURVE('',#214456,#214464,#214466,.T.); +#214464 = VERTEX_POINT('',#214465); +#214465 = CARTESIAN_POINT('',(206.146469,-70.236194,1.585)); +#214466 = LINE('',#214467,#214468); +#214467 = CARTESIAN_POINT('',(206.146469,-69.947947,1.585)); +#214468 = VECTOR('',#214469,1.); +#214469 = DIRECTION('',(0.,-1.,0.)); +#214470 = ORIENTED_EDGE('',*,*,#214471,.T.); +#214471 = EDGE_CURVE('',#214464,#214472,#214474,.T.); +#214472 = VERTEX_POINT('',#214473); +#214473 = CARTESIAN_POINT('',(206.520278,-70.236194,1.585)); +#214474 = LINE('',#214475,#214476); +#214475 = CARTESIAN_POINT('',(206.146469,-70.236194,1.585)); +#214476 = VECTOR('',#214477,1.); +#214477 = DIRECTION('',(1.,0.,0.)); +#214478 = ORIENTED_EDGE('',*,*,#214479,.T.); +#214479 = EDGE_CURVE('',#214472,#214480,#214482,.T.); +#214480 = VERTEX_POINT('',#214481); +#214481 = CARTESIAN_POINT('',(206.520278,-69.947947,1.585)); +#214482 = LINE('',#214483,#214484); +#214483 = CARTESIAN_POINT('',(206.520278,-70.236194,1.585)); +#214484 = VECTOR('',#214485,1.); +#214485 = DIRECTION('',(0.,1.,0.)); +#214486 = ORIENTED_EDGE('',*,*,#214487,.T.); +#214487 = EDGE_CURVE('',#214480,#214488,#214490,.T.); +#214488 = VERTEX_POINT('',#214489); +#214489 = CARTESIAN_POINT('',(206.48602,-69.879431,1.585)); +#214490 = LINE('',#214491,#214492); +#214491 = CARTESIAN_POINT('',(206.520278,-69.947947,1.585)); +#214492 = VECTOR('',#214493,1.); +#214493 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#214494 = ORIENTED_EDGE('',*,*,#214495,.T.); +#214495 = EDGE_CURVE('',#214488,#214445,#214496,.T.); +#214496 = LINE('',#214497,#214498); +#214497 = CARTESIAN_POINT('',(206.48602,-69.879431,1.585)); +#214498 = VECTOR('',#214499,1.); +#214499 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#214500 = PLANE('',#214501); +#214501 = AXIS2_PLACEMENT_3D('',#214502,#214503,#214504); +#214502 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214503 = DIRECTION('',(0.,0.,1.)); +#214504 = DIRECTION('',(1.,0.,-0.)); +#214505 = SHELL_BASED_SURFACE_MODEL('',(#214506)); +#214506 = OPEN_SHELL('',(#214507)); +#214507 = ADVANCED_FACE('',(#214508),#214578,.T.); +#214508 = FACE_BOUND('',#214509,.F.); +#214509 = EDGE_LOOP('',(#214510,#214521,#214529,#214538,#214546,#214555, + #214563,#214572)); +#214510 = ORIENTED_EDGE('',*,*,#214511,.T.); +#214511 = EDGE_CURVE('',#214512,#214514,#214516,.T.); +#214512 = VERTEX_POINT('',#214513); +#214513 = CARTESIAN_POINT('',(101.372601,-70.145559,1.585)); +#214514 = VERTEX_POINT('',#214515); +#214515 = CARTESIAN_POINT('',(101.455937,-70.145559,1.585)); +#214516 = CIRCLE('',#214517,7.499882881843E-02); +#214517 = AXIS2_PLACEMENT_3D('',#214518,#214519,#214520); +#214518 = CARTESIAN_POINT('',(101.414269,-70.20791765697,1.585)); +#214519 = DIRECTION('',(0.,0.,-1.)); +#214520 = DIRECTION('',(-0.555582009165,0.831461743613,0.)); +#214521 = ORIENTED_EDGE('',*,*,#214522,.T.); +#214522 = EDGE_CURVE('',#214514,#214523,#214525,.T.); +#214523 = VERTEX_POINT('',#214524); +#214524 = CARTESIAN_POINT('',(101.524248,-70.21387,1.585)); +#214525 = LINE('',#214526,#214527); +#214526 = CARTESIAN_POINT('',(101.455937,-70.145559,1.585)); +#214527 = VECTOR('',#214528,1.); +#214528 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#214529 = ORIENTED_EDGE('',*,*,#214530,.T.); +#214530 = EDGE_CURVE('',#214523,#214531,#214533,.T.); +#214531 = VERTEX_POINT('',#214532); +#214532 = CARTESIAN_POINT('',(101.514921,-70.308571,1.585)); +#214533 = CIRCLE('',#214534,7.499999203861E-02); +#214534 = AXIS2_PLACEMENT_3D('',#214535,#214536,#214537); +#214535 = CARTESIAN_POINT('',(101.46188796407,-70.25553803,1.585)); +#214536 = DIRECTION('',(0.,0.,-1.)); +#214537 = DIRECTION('',(0.831467233969,0.555573792431,0.)); +#214538 = ORIENTED_EDGE('',*,*,#214539,.T.); +#214539 = EDGE_CURVE('',#214531,#214540,#214542,.T.); +#214540 = VERTEX_POINT('',#214541); +#214541 = CARTESIAN_POINT('',(101.455937,-70.365517,1.585)); +#214542 = LINE('',#214543,#214544); +#214543 = CARTESIAN_POINT('',(101.514921,-70.308571,1.585)); +#214544 = VECTOR('',#214545,1.); +#214545 = DIRECTION('',(-0.71942625942,-0.694568828308,0.)); +#214546 = ORIENTED_EDGE('',*,*,#214547,.T.); +#214547 = EDGE_CURVE('',#214540,#214548,#214550,.T.); +#214548 = VERTEX_POINT('',#214549); +#214549 = CARTESIAN_POINT('',(101.361236,-70.35619,1.585)); +#214550 = CIRCLE('',#214551,7.499999203859E-02); +#214551 = AXIS2_PLACEMENT_3D('',#214552,#214553,#214554); +#214552 = CARTESIAN_POINT('',(101.41426896999,-70.30315696407,1.585)); +#214553 = DIRECTION('',(-0.,0.,-1.)); +#214554 = DIRECTION('',(0.555573792431,-0.831467233969,-0.)); +#214555 = ORIENTED_EDGE('',*,*,#214556,.T.); +#214556 = EDGE_CURVE('',#214548,#214557,#214559,.T.); +#214557 = VERTEX_POINT('',#214558); +#214558 = CARTESIAN_POINT('',(101.30429,-70.297206,1.585)); +#214559 = LINE('',#214560,#214561); +#214560 = CARTESIAN_POINT('',(101.361236,-70.35619,1.585)); +#214561 = VECTOR('',#214562,1.); +#214562 = DIRECTION('',(-0.694568828308,0.71942625942,0.)); +#214563 = ORIENTED_EDGE('',*,*,#214564,.T.); +#214564 = EDGE_CURVE('',#214557,#214565,#214567,.T.); +#214565 = VERTEX_POINT('',#214566); +#214566 = CARTESIAN_POINT('',(101.313617,-70.202505,1.585)); +#214567 = CIRCLE('',#214568,7.499999203867E-02); +#214568 = AXIS2_PLACEMENT_3D('',#214569,#214570,#214571); +#214569 = CARTESIAN_POINT('',(101.36665003592,-70.25553796999,1.585)); +#214570 = DIRECTION('',(0.,0.,-1.)); +#214571 = DIRECTION('',(-0.831467233969,-0.55557379243,-0.)); +#214572 = ORIENTED_EDGE('',*,*,#214573,.T.); +#214573 = EDGE_CURVE('',#214565,#214512,#214574,.T.); +#214574 = LINE('',#214575,#214576); +#214575 = CARTESIAN_POINT('',(101.313617,-70.202505,1.585)); +#214576 = VECTOR('',#214577,1.); +#214577 = DIRECTION('',(0.71942625942,0.694568828308,0.)); +#214578 = PLANE('',#214579); +#214579 = AXIS2_PLACEMENT_3D('',#214580,#214581,#214582); +#214580 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214581 = DIRECTION('',(0.,0.,1.)); +#214582 = DIRECTION('',(1.,0.,-0.)); +#214583 = SHELL_BASED_SURFACE_MODEL('',(#214584)); +#214584 = OPEN_SHELL('',(#214585)); +#214585 = ADVANCED_FACE('',(#214586),#214622,.T.); +#214586 = FACE_BOUND('',#214587,.F.); +#214587 = EDGE_LOOP('',(#214588,#214599,#214607,#214616)); +#214588 = ORIENTED_EDGE('',*,*,#214589,.T.); +#214589 = EDGE_CURVE('',#214590,#214592,#214594,.T.); +#214590 = VERTEX_POINT('',#214591); +#214591 = CARTESIAN_POINT('',(101.129392,-69.9056,1.585)); +#214592 = VERTEX_POINT('',#214593); +#214593 = CARTESIAN_POINT('',(101.129392,-69.7856,1.585)); +#214594 = CIRCLE('',#214595,6.000000000043E-02); +#214595 = AXIS2_PLACEMENT_3D('',#214596,#214597,#214598); +#214596 = CARTESIAN_POINT('',(101.12939177441,-69.8456,1.585)); +#214597 = DIRECTION('',(0.,0.,-1.)); +#214598 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#214599 = ORIENTED_EDGE('',*,*,#214600,.T.); +#214600 = EDGE_CURVE('',#214592,#214601,#214603,.T.); +#214601 = VERTEX_POINT('',#214602); +#214602 = CARTESIAN_POINT('',(101.603908,-69.7856,1.585)); +#214603 = LINE('',#214604,#214605); +#214604 = CARTESIAN_POINT('',(101.129392,-69.7856,1.585)); +#214605 = VECTOR('',#214606,1.); +#214606 = DIRECTION('',(1.,0.,0.)); +#214607 = ORIENTED_EDGE('',*,*,#214608,.T.); +#214608 = EDGE_CURVE('',#214601,#214609,#214611,.T.); +#214609 = VERTEX_POINT('',#214610); +#214610 = CARTESIAN_POINT('',(101.603908,-69.9056,1.585)); +#214611 = CIRCLE('',#214612,6.000000000043E-02); +#214612 = AXIS2_PLACEMENT_3D('',#214613,#214614,#214615); +#214613 = CARTESIAN_POINT('',(101.60390822558,-69.8456,1.585)); +#214614 = DIRECTION('',(0.,0.,-1.)); +#214615 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#214616 = ORIENTED_EDGE('',*,*,#214617,.T.); +#214617 = EDGE_CURVE('',#214609,#214590,#214618,.T.); +#214618 = LINE('',#214619,#214620); +#214619 = CARTESIAN_POINT('',(101.603908,-69.9056,1.585)); +#214620 = VECTOR('',#214621,1.); +#214621 = DIRECTION('',(-1.,0.,0.)); +#214622 = PLANE('',#214623); +#214623 = AXIS2_PLACEMENT_3D('',#214624,#214625,#214626); +#214624 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214625 = DIRECTION('',(0.,0.,1.)); +#214626 = DIRECTION('',(1.,0.,-0.)); +#214627 = SHELL_BASED_SURFACE_MODEL('',(#214628)); +#214628 = OPEN_SHELL('',(#214629)); +#214629 = ADVANCED_FACE('',(#214630),#214773,.T.); +#214630 = FACE_BOUND('',#214631,.F.); +#214631 = EDGE_LOOP('',(#214632,#214643,#214651,#214659,#214668,#214676, + #214684,#214693,#214701,#214710,#214718,#214726,#214734,#214743, + #214751,#214759,#214767)); +#214632 = ORIENTED_EDGE('',*,*,#214633,.T.); +#214633 = EDGE_CURVE('',#214634,#214636,#214638,.T.); +#214634 = VERTEX_POINT('',#214635); +#214635 = CARTESIAN_POINT('',(179.876467,-68.903597,1.585)); +#214636 = VERTEX_POINT('',#214637); +#214637 = CARTESIAN_POINT('',(179.993135,-68.965957,1.585)); +#214638 = CIRCLE('',#214639,7.500000000002E-02); +#214639 = AXIS2_PLACEMENT_3D('',#214640,#214641,#214642); +#214640 = CARTESIAN_POINT('',(179.918135,-68.96595706555,1.585)); +#214641 = DIRECTION('',(0.,0.,-1.)); +#214642 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#214643 = ORIENTED_EDGE('',*,*,#214644,.T.); +#214644 = EDGE_CURVE('',#214636,#214645,#214647,.T.); +#214645 = VERTEX_POINT('',#214646); +#214646 = CARTESIAN_POINT('',(179.993135,-69.033814,1.585)); +#214647 = LINE('',#214648,#214649); +#214648 = CARTESIAN_POINT('',(179.993135,-68.965957,1.585)); +#214649 = VECTOR('',#214650,1.); +#214650 = DIRECTION('',(0.,-1.,0.)); +#214651 = ORIENTED_EDGE('',*,*,#214652,.T.); +#214652 = EDGE_CURVE('',#214645,#214653,#214655,.T.); +#214653 = VERTEX_POINT('',#214654); +#214654 = CARTESIAN_POINT('',(180.266101,-69.035255,1.585)); +#214655 = LINE('',#214656,#214657); +#214656 = CARTESIAN_POINT('',(179.993135,-69.033814,1.585)); +#214657 = VECTOR('',#214658,1.); +#214658 = DIRECTION('',(0.999986066129,-5.278972184419E-03,0.)); +#214659 = ORIENTED_EDGE('',*,*,#214660,.T.); +#214660 = EDGE_CURVE('',#214653,#214661,#214663,.T.); +#214661 = VERTEX_POINT('',#214662); +#214662 = CARTESIAN_POINT('',(180.251469,-69.183814,1.585)); +#214663 = CIRCLE('',#214664,7.500006711462E-02); +#214664 = AXIS2_PLACEMENT_3D('',#214665,#214666,#214667); +#214665 = CARTESIAN_POINT('',(180.25146906711,-69.10881393288,1.585)); +#214666 = DIRECTION('',(0.,0.,-1.)); +#214667 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#214668 = ORIENTED_EDGE('',*,*,#214669,.T.); +#214669 = EDGE_CURVE('',#214661,#214670,#214672,.T.); +#214670 = VERTEX_POINT('',#214671); +#214671 = CARTESIAN_POINT('',(179.993135,-69.183814,1.585)); +#214672 = LINE('',#214673,#214674); +#214673 = CARTESIAN_POINT('',(180.251469,-69.183814,1.585)); +#214674 = VECTOR('',#214675,1.); +#214675 = DIRECTION('',(-1.,0.,0.)); +#214676 = ORIENTED_EDGE('',*,*,#214677,.T.); +#214677 = EDGE_CURVE('',#214670,#214678,#214680,.T.); +#214678 = VERTEX_POINT('',#214679); +#214679 = CARTESIAN_POINT('',(179.991694,-69.599636,1.585)); +#214680 = LINE('',#214681,#214682); +#214681 = CARTESIAN_POINT('',(179.993135,-69.183814,1.585)); +#214682 = VECTOR('',#214683,1.); +#214683 = DIRECTION('',(-3.465404301528E-03,-0.999993995468,0.)); +#214684 = ORIENTED_EDGE('',*,*,#214685,.T.); +#214685 = EDGE_CURVE('',#214678,#214686,#214688,.T.); +#214686 = VERTEX_POINT('',#214687); +#214687 = CARTESIAN_POINT('',(179.894417,-69.656155,1.585)); +#214688 = CIRCLE('',#214689,7.500041328202E-02); +#214689 = AXIS2_PLACEMENT_3D('',#214690,#214691,#214692); +#214690 = CARTESIAN_POINT('',(179.91813481481,-69.58500356113,1.585)); +#214691 = DIRECTION('',(0.,0.,-1.)); +#214692 = DIRECTION('',(0.980783731279,-0.195098109828,0.)); +#214693 = ORIENTED_EDGE('',*,*,#214694,.T.); +#214694 = EDGE_CURVE('',#214686,#214695,#214697,.T.); +#214695 = VERTEX_POINT('',#214696); +#214696 = CARTESIAN_POINT('',(179.166707,-69.412066,1.585)); +#214697 = LINE('',#214698,#214699); +#214698 = CARTESIAN_POINT('',(179.894417,-69.656155,1.585)); +#214699 = VECTOR('',#214700,1.); +#214700 = DIRECTION('',(-0.948087922996,0.318008317924,0.)); +#214701 = ORIENTED_EDGE('',*,*,#214702,.T.); +#214702 = EDGE_CURVE('',#214695,#214703,#214705,.T.); +#214703 = VERTEX_POINT('',#214704); +#214704 = CARTESIAN_POINT('',(179.227567,-69.275758,1.585)); +#214705 = CIRCLE('',#214706,7.50000151955E-02); +#214706 = AXIS2_PLACEMENT_3D('',#214707,#214708,#214709); +#214707 = CARTESIAN_POINT('',(179.20385009996,-69.34690932417,1.585)); +#214708 = DIRECTION('',(0.,0.,-1.)); +#214709 = DIRECTION('',(-0.495241232499,-0.868755501642,-0.)); +#214710 = ORIENTED_EDGE('',*,*,#214711,.T.); +#214711 = EDGE_CURVE('',#214703,#214712,#214714,.T.); +#214712 = VERTEX_POINT('',#214713); +#214713 = CARTESIAN_POINT('',(179.843135,-69.480947,1.585)); +#214714 = LINE('',#214715,#214716); +#214715 = CARTESIAN_POINT('',(179.227567,-69.275758,1.585)); +#214716 = VECTOR('',#214717,1.); +#214717 = DIRECTION('',(0.948683452166,-0.316227303671,0.)); +#214718 = ORIENTED_EDGE('',*,*,#214719,.T.); +#214719 = EDGE_CURVE('',#214712,#214720,#214722,.T.); +#214720 = VERTEX_POINT('',#214721); +#214721 = CARTESIAN_POINT('',(179.843135,-69.183814,1.585)); +#214722 = LINE('',#214723,#214724); +#214723 = CARTESIAN_POINT('',(179.843135,-69.480947,1.585)); +#214724 = VECTOR('',#214725,1.); +#214725 = DIRECTION('',(0.,1.,0.)); +#214726 = ORIENTED_EDGE('',*,*,#214727,.T.); +#214727 = EDGE_CURVE('',#214720,#214728,#214730,.T.); +#214728 = VERTEX_POINT('',#214729); +#214729 = CARTESIAN_POINT('',(179.57017,-69.182373,1.585)); +#214730 = LINE('',#214731,#214732); +#214731 = CARTESIAN_POINT('',(179.843135,-69.183814,1.585)); +#214732 = VECTOR('',#214733,1.); +#214733 = DIRECTION('',(-0.999986066027,5.278991523254E-03,0.)); +#214734 = ORIENTED_EDGE('',*,*,#214735,.T.); +#214735 = EDGE_CURVE('',#214728,#214736,#214738,.T.); +#214736 = VERTEX_POINT('',#214737); +#214737 = CARTESIAN_POINT('',(179.584802,-69.033814,1.585)); +#214738 = CIRCLE('',#214739,7.500006711464E-02); +#214739 = AXIS2_PLACEMENT_3D('',#214740,#214741,#214742); +#214740 = CARTESIAN_POINT('',(179.58480193288,-69.10881406711,1.585)); +#214741 = DIRECTION('',(0.,0.,-1.)); +#214742 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#214743 = ORIENTED_EDGE('',*,*,#214744,.T.); +#214744 = EDGE_CURVE('',#214736,#214745,#214747,.T.); +#214745 = VERTEX_POINT('',#214746); +#214746 = CARTESIAN_POINT('',(179.843135,-69.033814,1.585)); +#214747 = LINE('',#214748,#214749); +#214748 = CARTESIAN_POINT('',(179.584802,-69.033814,1.585)); +#214749 = VECTOR('',#214750,1.); +#214750 = DIRECTION('',(1.,0.,0.)); +#214751 = ORIENTED_EDGE('',*,*,#214752,.T.); +#214752 = EDGE_CURVE('',#214745,#214753,#214755,.T.); +#214753 = VERTEX_POINT('',#214754); +#214754 = CARTESIAN_POINT('',(179.844576,-68.951325,1.585)); +#214755 = LINE('',#214756,#214757); +#214756 = CARTESIAN_POINT('',(179.843135,-69.033814,1.585)); +#214757 = VECTOR('',#214758,1.); +#214758 = DIRECTION('',(1.746633100582E-02,0.999847452005,0.)); +#214759 = ORIENTED_EDGE('',*,*,#214760,.T.); +#214760 = EDGE_CURVE('',#214753,#214761,#214763,.T.); +#214761 = VERTEX_POINT('',#214762); +#214762 = CARTESIAN_POINT('',(179.855775,-68.924289,1.585)); +#214763 = LINE('',#214764,#214765); +#214764 = CARTESIAN_POINT('',(179.844576,-68.951325,1.585)); +#214765 = VECTOR('',#214766,1.); +#214766 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#214767 = ORIENTED_EDGE('',*,*,#214768,.T.); +#214768 = EDGE_CURVE('',#214761,#214634,#214769,.T.); +#214769 = LINE('',#214770,#214771); +#214770 = CARTESIAN_POINT('',(179.855775,-68.924289,1.585)); +#214771 = VECTOR('',#214772,1.); +#214772 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#214773 = PLANE('',#214774); +#214774 = AXIS2_PLACEMENT_3D('',#214775,#214776,#214777); +#214775 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214776 = DIRECTION('',(0.,0.,1.)); +#214777 = DIRECTION('',(1.,0.,-0.)); +#214778 = SHELL_BASED_SURFACE_MODEL('',(#214779)); +#214779 = OPEN_SHELL('',(#214780)); +#214780 = ADVANCED_FACE('',(#214781),#214825,.T.); +#214781 = FACE_BOUND('',#214782,.F.); +#214782 = EDGE_LOOP('',(#214783,#214794,#214802,#214811,#214819)); +#214783 = ORIENTED_EDGE('',*,*,#214784,.T.); +#214784 = EDGE_CURVE('',#214785,#214787,#214789,.T.); +#214785 = VERTEX_POINT('',#214786); +#214786 = CARTESIAN_POINT('',(177.788717,-69.062881,1.585)); +#214787 = VERTEX_POINT('',#214788); +#214788 = CARTESIAN_POINT('',(177.90415,-69.085842,1.585)); +#214789 = CIRCLE('',#214790,6.000007318647E-02); +#214790 = AXIS2_PLACEMENT_3D('',#214791,#214792,#214793); +#214791 = CARTESIAN_POINT('',(177.84414992681,-69.08584182331,1.585)); +#214792 = DIRECTION('',(0.,0.,-1.)); +#214793 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#214794 = ORIENTED_EDGE('',*,*,#214795,.T.); +#214795 = EDGE_CURVE('',#214787,#214796,#214798,.T.); +#214796 = VERTEX_POINT('',#214797); +#214797 = CARTESIAN_POINT('',(177.90415,-69.560358,1.585)); +#214798 = LINE('',#214799,#214800); +#214799 = CARTESIAN_POINT('',(177.90415,-69.085842,1.585)); +#214800 = VECTOR('',#214801,1.); +#214801 = DIRECTION('',(0.,-1.,0.)); +#214802 = ORIENTED_EDGE('',*,*,#214803,.T.); +#214803 = EDGE_CURVE('',#214796,#214804,#214806,.T.); +#214804 = VERTEX_POINT('',#214805); +#214805 = CARTESIAN_POINT('',(177.78415,-69.560358,1.585)); +#214806 = CIRCLE('',#214807,6.000000000041E-02); +#214807 = AXIS2_PLACEMENT_3D('',#214808,#214809,#214810); +#214808 = CARTESIAN_POINT('',(177.84415,-69.56035822558,1.585)); +#214809 = DIRECTION('',(0.,0.,-1.)); +#214810 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#214811 = ORIENTED_EDGE('',*,*,#214812,.T.); +#214812 = EDGE_CURVE('',#214804,#214813,#214815,.T.); +#214813 = VERTEX_POINT('',#214814); +#214814 = CARTESIAN_POINT('',(177.78415,-69.085842,1.585)); +#214815 = LINE('',#214816,#214817); +#214816 = CARTESIAN_POINT('',(177.78415,-69.560358,1.585)); +#214817 = VECTOR('',#214818,1.); +#214818 = DIRECTION('',(0.,1.,0.)); +#214819 = ORIENTED_EDGE('',*,*,#214820,.T.); +#214820 = EDGE_CURVE('',#214813,#214785,#214821,.T.); +#214821 = LINE('',#214822,#214823); +#214822 = CARTESIAN_POINT('',(177.78415,-69.085842,1.585)); +#214823 = VECTOR('',#214824,1.); +#214824 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#214825 = PLANE('',#214826); +#214826 = AXIS2_PLACEMENT_3D('',#214827,#214828,#214829); +#214827 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214828 = DIRECTION('',(0.,0.,1.)); +#214829 = DIRECTION('',(1.,0.,-0.)); +#214830 = SHELL_BASED_SURFACE_MODEL('',(#214831)); +#214831 = OPEN_SHELL('',(#214832)); +#214832 = ADVANCED_FACE('',(#214833),#214877,.T.); +#214833 = FACE_BOUND('',#214834,.F.); +#214834 = EDGE_LOOP('',(#214835,#214846,#214854,#214863,#214871)); +#214835 = ORIENTED_EDGE('',*,*,#214836,.T.); +#214836 = EDGE_CURVE('',#214837,#214839,#214841,.T.); +#214837 = VERTEX_POINT('',#214838); +#214838 = CARTESIAN_POINT('',(178.833717,-69.062881,1.585)); +#214839 = VERTEX_POINT('',#214840); +#214840 = CARTESIAN_POINT('',(178.94915,-69.085842,1.585)); +#214841 = CIRCLE('',#214842,6.000007318647E-02); +#214842 = AXIS2_PLACEMENT_3D('',#214843,#214844,#214845); +#214843 = CARTESIAN_POINT('',(178.88914992681,-69.08584182331,1.585)); +#214844 = DIRECTION('',(0.,0.,-1.)); +#214845 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#214846 = ORIENTED_EDGE('',*,*,#214847,.T.); +#214847 = EDGE_CURVE('',#214839,#214848,#214850,.T.); +#214848 = VERTEX_POINT('',#214849); +#214849 = CARTESIAN_POINT('',(178.94915,-69.560358,1.585)); +#214850 = LINE('',#214851,#214852); +#214851 = CARTESIAN_POINT('',(178.94915,-69.085842,1.585)); +#214852 = VECTOR('',#214853,1.); +#214853 = DIRECTION('',(0.,-1.,0.)); +#214854 = ORIENTED_EDGE('',*,*,#214855,.T.); +#214855 = EDGE_CURVE('',#214848,#214856,#214858,.T.); +#214856 = VERTEX_POINT('',#214857); +#214857 = CARTESIAN_POINT('',(178.82915,-69.560358,1.585)); +#214858 = CIRCLE('',#214859,6.000000000042E-02); +#214859 = AXIS2_PLACEMENT_3D('',#214860,#214861,#214862); +#214860 = CARTESIAN_POINT('',(178.88915,-69.56035822558,1.585)); +#214861 = DIRECTION('',(0.,0.,-1.)); +#214862 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#214863 = ORIENTED_EDGE('',*,*,#214864,.T.); +#214864 = EDGE_CURVE('',#214856,#214865,#214867,.T.); +#214865 = VERTEX_POINT('',#214866); +#214866 = CARTESIAN_POINT('',(178.82915,-69.085842,1.585)); +#214867 = LINE('',#214868,#214869); +#214868 = CARTESIAN_POINT('',(178.82915,-69.560358,1.585)); +#214869 = VECTOR('',#214870,1.); +#214870 = DIRECTION('',(0.,1.,0.)); +#214871 = ORIENTED_EDGE('',*,*,#214872,.T.); +#214872 = EDGE_CURVE('',#214865,#214837,#214873,.T.); +#214873 = LINE('',#214874,#214875); +#214874 = CARTESIAN_POINT('',(178.82915,-69.085842,1.585)); +#214875 = VECTOR('',#214876,1.); +#214876 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#214877 = PLANE('',#214878); +#214878 = AXIS2_PLACEMENT_3D('',#214879,#214880,#214881); +#214879 = CARTESIAN_POINT('',(0.,0.,1.585)); +#214880 = DIRECTION('',(0.,0.,1.)); +#214881 = DIRECTION('',(1.,0.,-0.)); +#214882 = SHELL_BASED_SURFACE_MODEL('',(#214883)); +#214883 = OPEN_SHELL('',(#214884)); +#214884 = ADVANCED_FACE('',(#214885,#215020,#215090),#215160,.T.); +#214885 = FACE_BOUND('',#214886,.F.); +#214886 = EDGE_LOOP('',(#214887,#214898,#214906,#214914,#214922,#214930, + #214939,#214947,#214956,#214964,#214973,#214981,#214989,#214997, + #215005,#215014)); +#214887 = ORIENTED_EDGE('',*,*,#214888,.T.); +#214888 = EDGE_CURVE('',#214889,#214891,#214893,.T.); +#214889 = VERTEX_POINT('',#214890); +#214890 = CARTESIAN_POINT('',(205.999132,-68.958052,1.585)); +#214891 = VERTEX_POINT('',#214892); +#214892 = CARTESIAN_POINT('',(206.247313,-68.713826,1.585)); +#214893 = CIRCLE('',#214894,0.348621382901); +#214894 = AXIS2_PLACEMENT_3D('',#214895,#214896,#214897); +#214895 = CARTESIAN_POINT('',(206.33507322951,-69.05122044383,1.585)); +#214896 = DIRECTION('',(0.,0.,-1.)); +#214897 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#214898 = ORIENTED_EDGE('',*,*,#214899,.T.); +#214899 = EDGE_CURVE('',#214891,#214900,#214902,.T.); +#214900 = VERTEX_POINT('',#214901); +#214901 = CARTESIAN_POINT('',(206.324196,-68.713826,1.585)); +#214902 = LINE('',#214903,#214904); +#214903 = CARTESIAN_POINT('',(206.247313,-68.713826,1.585)); +#214904 = VECTOR('',#214905,1.); +#214905 = DIRECTION('',(1.,0.,0.)); +#214906 = ORIENTED_EDGE('',*,*,#214907,.T.); +#214907 = EDGE_CURVE('',#214900,#214908,#214910,.T.); +#214908 = VERTEX_POINT('',#214909); +#214909 = CARTESIAN_POINT('',(206.452085,-68.777252,1.585)); +#214910 = LINE('',#214911,#214912); +#214911 = CARTESIAN_POINT('',(206.324196,-68.713826,1.585)); +#214912 = VECTOR('',#214913,1.); +#214913 = DIRECTION('',(0.895875328998,-0.444305519764,0.)); +#214914 = ORIENTED_EDGE('',*,*,#214915,.T.); +#214915 = EDGE_CURVE('',#214908,#214916,#214918,.T.); +#214916 = VERTEX_POINT('',#214917); +#214917 = CARTESIAN_POINT('',(206.50004,-68.824176,1.585)); +#214918 = LINE('',#214919,#214920); +#214919 = CARTESIAN_POINT('',(206.452085,-68.777252,1.585)); +#214920 = VECTOR('',#214921,1.); +#214921 = DIRECTION('',(0.714748339676,-0.699381734771,0.)); +#214922 = ORIENTED_EDGE('',*,*,#214923,.T.); +#214923 = EDGE_CURVE('',#214916,#214924,#214926,.T.); +#214924 = VERTEX_POINT('',#214925); +#214925 = CARTESIAN_POINT('',(206.561737,-68.767922,1.585)); +#214926 = LINE('',#214927,#214928); +#214927 = CARTESIAN_POINT('',(206.50004,-68.824176,1.585)); +#214928 = VECTOR('',#214929,1.); +#214929 = DIRECTION('',(0.738950757729,0.673759436039,0.)); +#214930 = ORIENTED_EDGE('',*,*,#214931,.T.); +#214931 = EDGE_CURVE('',#214924,#214932,#214934,.T.); +#214932 = VERTEX_POINT('',#214933); +#214933 = CARTESIAN_POINT('',(207.023513,-68.777252,1.585)); +#214934 = CIRCLE('',#214935,0.395776174071); +#214935 = AXIS2_PLACEMENT_3D('',#214936,#214937,#214938); +#214936 = CARTESIAN_POINT('',(206.78613225855,-69.09393664369,1.585)); +#214937 = DIRECTION('',(0.,0.,-1.)); +#214938 = DIRECTION('',(-0.566975157302,0.823734891214,0.)); +#214939 = ORIENTED_EDGE('',*,*,#214940,.T.); +#214940 = EDGE_CURVE('',#214932,#214941,#214943,.T.); +#214941 = VERTEX_POINT('',#214942); +#214942 = CARTESIAN_POINT('',(207.086967,-68.842782,1.585)); +#214943 = LINE('',#214944,#214945); +#214944 = CARTESIAN_POINT('',(207.023513,-68.777252,1.585)); +#214945 = VECTOR('',#214946,1.); +#214946 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#214947 = ORIENTED_EDGE('',*,*,#214948,.T.); +#214948 = EDGE_CURVE('',#214941,#214949,#214951,.T.); +#214949 = VERTEX_POINT('',#214950); +#214950 = CARTESIAN_POINT('',(207.0816,-69.310859,1.585)); +#214951 = CIRCLE('',#214952,0.397465645887); +#214952 = AXIS2_PLACEMENT_3D('',#214953,#214954,#214955); +#214953 = CARTESIAN_POINT('',(206.76306059713,-69.07313733821,1.585)); +#214954 = DIRECTION('',(0.,0.,-1.)); +#214955 = DIRECTION('',(0.814929305758,0.579560373574,0.)); +#214956 = ORIENTED_EDGE('',*,*,#214957,.T.); +#214957 = EDGE_CURVE('',#214949,#214958,#214960,.T.); +#214958 = VERTEX_POINT('',#214959); +#214959 = CARTESIAN_POINT('',(207.016067,-69.374312,1.585)); +#214960 = LINE('',#214961,#214962); +#214961 = CARTESIAN_POINT('',(207.0816,-69.310859,1.585)); +#214962 = VECTOR('',#214963,1.); +#214963 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#214964 = ORIENTED_EDGE('',*,*,#214965,.T.); +#214965 = EDGE_CURVE('',#214958,#214966,#214968,.T.); +#214966 = VERTEX_POINT('',#214967); +#214967 = CARTESIAN_POINT('',(206.547994,-69.368945,1.585)); +#214968 = CIRCLE('',#214969,0.397460357127); +#214969 = AXIS2_PLACEMENT_3D('',#214970,#214971,#214972); +#214970 = CARTESIAN_POINT('',(206.78571363493,-69.05041068371,1.585)); +#214971 = DIRECTION('',(-0.,0.,-1.)); +#214972 = DIRECTION('',(0.579563121028,-0.81492735182,-0.)); +#214973 = ORIENTED_EDGE('',*,*,#214974,.T.); +#214974 = EDGE_CURVE('',#214966,#214975,#214977,.T.); +#214975 = VERTEX_POINT('',#214976); +#214976 = CARTESIAN_POINT('',(206.50004,-69.322022,1.585)); +#214977 = LINE('',#214978,#214979); +#214978 = CARTESIAN_POINT('',(206.547994,-69.368945,1.585)); +#214979 = VECTOR('',#214980,1.); +#214980 = DIRECTION('',(-0.71474849986,0.699381571067,0.)); +#214981 = ORIENTED_EDGE('',*,*,#214982,.T.); +#214982 = EDGE_CURVE('',#214975,#214983,#214985,.T.); +#214983 = VERTEX_POINT('',#214984); +#214984 = CARTESIAN_POINT('',(206.438343,-69.378276,1.585)); +#214985 = LINE('',#214986,#214987); +#214986 = CARTESIAN_POINT('',(206.50004,-69.322022,1.585)); +#214987 = VECTOR('',#214988,1.); +#214988 = DIRECTION('',(-0.738950757729,-0.673759436039,0.)); +#214989 = ORIENTED_EDGE('',*,*,#214990,.T.); +#214990 = EDGE_CURVE('',#214983,#214991,#214993,.T.); +#214991 = VERTEX_POINT('',#214992); +#214992 = CARTESIAN_POINT('',(206.324196,-69.432372,1.585)); +#214993 = LINE('',#214994,#214995); +#214994 = CARTESIAN_POINT('',(206.438343,-69.378276,1.585)); +#214995 = VECTOR('',#214996,1.); +#214996 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#214997 = ORIENTED_EDGE('',*,*,#214998,.T.); +#214998 = EDGE_CURVE('',#214991,#214999,#215001,.T.); +#214999 = VERTEX_POINT('',#215000); +#215000 = CARTESIAN_POINT('',(206.242135,-69.43115,1.585)); +#215001 = LINE('',#215002,#215003); +#215002 = CARTESIAN_POINT('',(206.324196,-69.432372,1.585)); +#215003 = VECTOR('',#215004,1.); +#215004 = DIRECTION('',(-0.999889142116,1.488971047957E-02,0.)); +#215005 = ORIENTED_EDGE('',*,*,#215006,.T.); +#215006 = EDGE_CURVE('',#214999,#215007,#215009,.T.); +#215007 = VERTEX_POINT('',#215008); +#215008 = CARTESIAN_POINT('',(205.99791,-69.182969,1.585)); +#215009 = CIRCLE('',#215010,0.348628078749); +#215010 = AXIS2_PLACEMENT_3D('',#215011,#215012,#215013); +#215011 = CARTESIAN_POINT('',(206.3353100302,-69.09520364857,1.585)); +#215012 = DIRECTION('',(0.,0.,-1.)); +#215013 = DIRECTION('',(-0.267261978831,-0.963623907275,-0.)); +#215014 = ORIENTED_EDGE('',*,*,#215015,.T.); +#215015 = EDGE_CURVE('',#215007,#214889,#215016,.T.); +#215016 = LINE('',#215017,#215018); +#215017 = CARTESIAN_POINT('',(205.99791,-69.182969,1.585)); +#215018 = VECTOR('',#215019,1.); +#215019 = DIRECTION('',(5.433035139454E-03,0.999985240956,0.)); +#215020 = FACE_BOUND('',#215021,.F.); +#215021 = EDGE_LOOP('',(#215022,#215033,#215041,#215050,#215058,#215067, + #215075,#215084)); +#215022 = ORIENTED_EDGE('',*,*,#215023,.T.); +#215023 = EDGE_CURVE('',#215024,#215026,#215028,.T.); +#215024 = VERTEX_POINT('',#215025); +#215025 = CARTESIAN_POINT('',(206.42504,-68.995566,1.585)); +#215026 = VERTEX_POINT('',#215027); +#215027 = CARTESIAN_POINT('',(206.291859,-68.862385,1.585)); +#215028 = CIRCLE('',#215029,0.18686440374); +#215029 = AXIS2_PLACEMENT_3D('',#215030,#215031,#215032); +#215030 = CARTESIAN_POINT('',(206.244323,-69.043102,1.585)); +#215031 = DIRECTION('',(0.,0.,1.)); +#215032 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#215033 = ORIENTED_EDGE('',*,*,#215034,.T.); +#215034 = EDGE_CURVE('',#215026,#215035,#215037,.T.); +#215035 = VERTEX_POINT('',#215036); +#215036 = CARTESIAN_POINT('',(206.27965,-68.862385,1.585)); +#215037 = LINE('',#215038,#215039); +#215038 = CARTESIAN_POINT('',(206.291859,-68.862385,1.585)); +#215039 = VECTOR('',#215040,1.); +#215040 = DIRECTION('',(-1.,0.,0.)); +#215041 = ORIENTED_EDGE('',*,*,#215042,.T.); +#215042 = EDGE_CURVE('',#215035,#215043,#215045,.T.); +#215043 = VERTEX_POINT('',#215044); +#215044 = CARTESIAN_POINT('',(206.146469,-68.995566,1.585)); +#215045 = CIRCLE('',#215046,0.18686440374); +#215046 = AXIS2_PLACEMENT_3D('',#215047,#215048,#215049); +#215047 = CARTESIAN_POINT('',(206.327186,-69.043102,1.585)); +#215048 = DIRECTION('',(0.,0.,1.)); +#215049 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#215050 = ORIENTED_EDGE('',*,*,#215051,.T.); +#215051 = EDGE_CURVE('',#215043,#215052,#215054,.T.); +#215052 = VERTEX_POINT('',#215053); +#215053 = CARTESIAN_POINT('',(206.146469,-69.150632,1.585)); +#215054 = LINE('',#215055,#215056); +#215055 = CARTESIAN_POINT('',(206.146469,-68.995566,1.585)); +#215056 = VECTOR('',#215057,1.); +#215057 = DIRECTION('',(0.,-1.,0.)); +#215058 = ORIENTED_EDGE('',*,*,#215059,.T.); +#215059 = EDGE_CURVE('',#215052,#215060,#215062,.T.); +#215060 = VERTEX_POINT('',#215061); +#215061 = CARTESIAN_POINT('',(206.27965,-69.283813,1.585)); +#215062 = CIRCLE('',#215063,0.18686440374); +#215063 = AXIS2_PLACEMENT_3D('',#215064,#215065,#215066); +#215064 = CARTESIAN_POINT('',(206.327186,-69.103096,1.585)); +#215065 = DIRECTION('',(0.,0.,1.)); +#215066 = DIRECTION('',(-0.967102328658,-0.254387668537,0.)); +#215067 = ORIENTED_EDGE('',*,*,#215068,.T.); +#215068 = EDGE_CURVE('',#215060,#215069,#215071,.T.); +#215069 = VERTEX_POINT('',#215070); +#215070 = CARTESIAN_POINT('',(206.291859,-69.283813,1.585)); +#215071 = LINE('',#215072,#215073); +#215072 = CARTESIAN_POINT('',(206.27965,-69.283813,1.585)); +#215073 = VECTOR('',#215074,1.); +#215074 = DIRECTION('',(1.,0.,0.)); +#215075 = ORIENTED_EDGE('',*,*,#215076,.T.); +#215076 = EDGE_CURVE('',#215069,#215077,#215079,.T.); +#215077 = VERTEX_POINT('',#215078); +#215078 = CARTESIAN_POINT('',(206.42504,-69.150632,1.585)); +#215079 = CIRCLE('',#215080,0.18686440374); +#215080 = AXIS2_PLACEMENT_3D('',#215081,#215082,#215083); +#215081 = CARTESIAN_POINT('',(206.244323,-69.103096,1.585)); +#215082 = DIRECTION('',(0.,0.,1.)); +#215083 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#215084 = ORIENTED_EDGE('',*,*,#215085,.T.); +#215085 = EDGE_CURVE('',#215077,#215024,#215086,.T.); +#215086 = LINE('',#215087,#215088); +#215087 = CARTESIAN_POINT('',(206.42504,-69.150632,1.585)); +#215088 = VECTOR('',#215089,1.); +#215089 = DIRECTION('',(0.,1.,0.)); +#215090 = FACE_BOUND('',#215091,.F.); +#215091 = EDGE_LOOP('',(#215092,#215103,#215111,#215120,#215128,#215137, + #215145,#215154)); +#215092 = ORIENTED_EDGE('',*,*,#215093,.T.); +#215093 = EDGE_CURVE('',#215094,#215096,#215098,.T.); +#215094 = VERTEX_POINT('',#215095); +#215095 = CARTESIAN_POINT('',(206.931803,-68.896643,1.585)); +#215096 = VERTEX_POINT('',#215097); +#215097 = CARTESIAN_POINT('',(206.639705,-68.896643,1.585)); +#215098 = CIRCLE('',#215099,0.252889603602); +#215099 = AXIS2_PLACEMENT_3D('',#215100,#215101,#215102); +#215100 = CARTESIAN_POINT('',(206.785754,-69.103096,1.585)); +#215101 = DIRECTION('',(0.,0.,1.)); +#215102 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#215103 = ORIENTED_EDGE('',*,*,#215104,.T.); +#215104 = EDGE_CURVE('',#215096,#215105,#215107,.T.); +#215105 = VERTEX_POINT('',#215106); +#215106 = CARTESIAN_POINT('',(206.609298,-68.92705,1.585)); +#215107 = LINE('',#215108,#215109); +#215108 = CARTESIAN_POINT('',(206.639705,-68.896643,1.585)); +#215109 = VECTOR('',#215110,1.); +#215110 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#215111 = ORIENTED_EDGE('',*,*,#215112,.T.); +#215112 = EDGE_CURVE('',#215105,#215113,#215115,.T.); +#215113 = VERTEX_POINT('',#215114); +#215114 = CARTESIAN_POINT('',(206.609298,-69.219148,1.585)); +#215115 = CIRCLE('',#215116,0.252889603602); +#215116 = AXIS2_PLACEMENT_3D('',#215117,#215118,#215119); +#215117 = CARTESIAN_POINT('',(206.815751,-69.073099,1.585)); +#215118 = DIRECTION('',(0.,0.,1.)); +#215119 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#215120 = ORIENTED_EDGE('',*,*,#215121,.T.); +#215121 = EDGE_CURVE('',#215113,#215122,#215124,.T.); +#215122 = VERTEX_POINT('',#215123); +#215123 = CARTESIAN_POINT('',(206.639705,-69.249555,1.585)); +#215124 = LINE('',#215125,#215126); +#215125 = CARTESIAN_POINT('',(206.609298,-69.219148,1.585)); +#215126 = VECTOR('',#215127,1.); +#215127 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#215128 = ORIENTED_EDGE('',*,*,#215129,.T.); +#215129 = EDGE_CURVE('',#215122,#215130,#215132,.T.); +#215130 = VERTEX_POINT('',#215131); +#215131 = CARTESIAN_POINT('',(206.931803,-69.249554,1.585)); +#215132 = CIRCLE('',#215133,0.25288804141); +#215133 = AXIS2_PLACEMENT_3D('',#215134,#215135,#215136); +#215134 = CARTESIAN_POINT('',(206.78575329321,-69.04310341357,1.585)); +#215135 = DIRECTION('',(0.,0.,1.)); +#215136 = DIRECTION('',(-0.577521548265,-0.81637544138,0.)); +#215137 = ORIENTED_EDGE('',*,*,#215138,.T.); +#215138 = EDGE_CURVE('',#215130,#215139,#215141,.T.); +#215139 = VERTEX_POINT('',#215140); +#215140 = CARTESIAN_POINT('',(206.962211,-69.219147,1.585)); +#215141 = LINE('',#215142,#215143); +#215142 = CARTESIAN_POINT('',(206.931803,-69.249554,1.585)); +#215143 = VECTOR('',#215144,1.); +#215144 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#215145 = ORIENTED_EDGE('',*,*,#215146,.T.); +#215146 = EDGE_CURVE('',#215139,#215147,#215149,.T.); +#215147 = VERTEX_POINT('',#215148); +#215148 = CARTESIAN_POINT('',(206.962211,-68.92705,1.585)); +#215149 = CIRCLE('',#215150,0.252886650841); +#215150 = AXIS2_PLACEMENT_3D('',#215151,#215152,#215153); +#215151 = CARTESIAN_POINT('',(206.7557612632,-69.0730985,1.585)); +#215152 = DIRECTION('',(0.,-0.,1.)); +#215153 = DIRECTION('',(0.816372616368,-0.577525541638,-0.)); +#215154 = ORIENTED_EDGE('',*,*,#215155,.T.); +#215155 = EDGE_CURVE('',#215147,#215094,#215156,.T.); +#215156 = LINE('',#215157,#215158); +#215157 = CARTESIAN_POINT('',(206.962211,-68.92705,1.585)); +#215158 = VECTOR('',#215159,1.); +#215159 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#215160 = PLANE('',#215161); +#215161 = AXIS2_PLACEMENT_3D('',#215162,#215163,#215164); +#215162 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215163 = DIRECTION('',(0.,0.,1.)); +#215164 = DIRECTION('',(1.,0.,-0.)); +#215165 = SHELL_BASED_SURFACE_MODEL('',(#215166)); +#215166 = OPEN_SHELL('',(#215167)); +#215167 = ADVANCED_FACE('',(#215168),#215204,.T.); +#215168 = FACE_BOUND('',#215169,.F.); +#215169 = EDGE_LOOP('',(#215170,#215181,#215189,#215198)); +#215170 = ORIENTED_EDGE('',*,*,#215171,.T.); +#215171 = EDGE_CURVE('',#215172,#215174,#215176,.T.); +#215172 = VERTEX_POINT('',#215173); +#215173 = CARTESIAN_POINT('',(101.129392,-68.8606,1.585)); +#215174 = VERTEX_POINT('',#215175); +#215175 = CARTESIAN_POINT('',(101.129392,-68.7406,1.585)); +#215176 = CIRCLE('',#215177,6.000000000042E-02); +#215177 = AXIS2_PLACEMENT_3D('',#215178,#215179,#215180); +#215178 = CARTESIAN_POINT('',(101.12939177441,-68.8006,1.585)); +#215179 = DIRECTION('',(0.,0.,-1.)); +#215180 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#215181 = ORIENTED_EDGE('',*,*,#215182,.T.); +#215182 = EDGE_CURVE('',#215174,#215183,#215185,.T.); +#215183 = VERTEX_POINT('',#215184); +#215184 = CARTESIAN_POINT('',(101.603908,-68.7406,1.585)); +#215185 = LINE('',#215186,#215187); +#215186 = CARTESIAN_POINT('',(101.129392,-68.7406,1.585)); +#215187 = VECTOR('',#215188,1.); +#215188 = DIRECTION('',(1.,0.,0.)); +#215189 = ORIENTED_EDGE('',*,*,#215190,.T.); +#215190 = EDGE_CURVE('',#215183,#215191,#215193,.T.); +#215191 = VERTEX_POINT('',#215192); +#215192 = CARTESIAN_POINT('',(101.603908,-68.8606,1.585)); +#215193 = CIRCLE('',#215194,6.000000000043E-02); +#215194 = AXIS2_PLACEMENT_3D('',#215195,#215196,#215197); +#215195 = CARTESIAN_POINT('',(101.60390822558,-68.8006,1.585)); +#215196 = DIRECTION('',(0.,0.,-1.)); +#215197 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#215198 = ORIENTED_EDGE('',*,*,#215199,.T.); +#215199 = EDGE_CURVE('',#215191,#215172,#215200,.T.); +#215200 = LINE('',#215201,#215202); +#215201 = CARTESIAN_POINT('',(101.603908,-68.8606,1.585)); +#215202 = VECTOR('',#215203,1.); +#215203 = DIRECTION('',(-1.,0.,0.)); +#215204 = PLANE('',#215205); +#215205 = AXIS2_PLACEMENT_3D('',#215206,#215207,#215208); +#215206 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215207 = DIRECTION('',(0.,0.,1.)); +#215208 = DIRECTION('',(1.,0.,-0.)); +#215209 = SHELL_BASED_SURFACE_MODEL('',(#215210)); +#215210 = OPEN_SHELL('',(#215211)); +#215211 = ADVANCED_FACE('',(#215212,#215314),#215416,.T.); +#215212 = FACE_BOUND('',#215213,.F.); +#215213 = EDGE_LOOP('',(#215214,#215224,#215233,#215241,#215249,#215258, + #215266,#215274,#215283,#215291,#215299,#215308)); +#215214 = ORIENTED_EDGE('',*,*,#215215,.T.); +#215215 = EDGE_CURVE('',#215216,#215218,#215220,.T.); +#215216 = VERTEX_POINT('',#215217); +#215217 = CARTESIAN_POINT('',(179.306866,-68.093315,1.585)); +#215218 = VERTEX_POINT('',#215219); +#215219 = CARTESIAN_POINT('',(179.423755,-68.036053,1.585)); +#215220 = LINE('',#215221,#215222); +#215221 = CARTESIAN_POINT('',(179.306866,-68.093315,1.585)); +#215222 = VECTOR('',#215223,1.); +#215223 = DIRECTION('',(0.898031613354,0.439930928007,0.)); +#215224 = ORIENTED_EDGE('',*,*,#215225,.T.); +#215225 = EDGE_CURVE('',#215218,#215226,#215228,.T.); +#215226 = VERTEX_POINT('',#215227); +#215227 = CARTESIAN_POINT('',(180.094533,-68.041732,1.585)); +#215228 = CIRCLE('',#215229,0.965975843555); +#215229 = AXIS2_PLACEMENT_3D('',#215230,#215231,#215232); +#215230 = CARTESIAN_POINT('',(179.75147484794,-68.94473833145,1.585)); +#215231 = DIRECTION('',(0.,0.,-1.)); +#215232 = DIRECTION('',(-0.339262984817,0.940691568546,0.)); +#215233 = ORIENTED_EDGE('',*,*,#215234,.T.); +#215234 = EDGE_CURVE('',#215226,#215235,#215237,.T.); +#215235 = VERTEX_POINT('',#215236); +#215236 = CARTESIAN_POINT('',(180.203513,-68.098681,1.585)); +#215237 = LINE('',#215238,#215239); +#215238 = CARTESIAN_POINT('',(180.094533,-68.041732,1.585)); +#215239 = VECTOR('',#215240,1.); +#215240 = DIRECTION('',(0.886284927964,-0.46314039606,0.)); +#215241 = ORIENTED_EDGE('',*,*,#215242,.T.); +#215242 = EDGE_CURVE('',#215235,#215243,#215245,.T.); +#215243 = VERTEX_POINT('',#215244); +#215244 = CARTESIAN_POINT('',(180.266967,-68.164211,1.585)); +#215245 = LINE('',#215246,#215247); +#215246 = CARTESIAN_POINT('',(180.203513,-68.098681,1.585)); +#215247 = VECTOR('',#215248,1.); +#215248 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#215249 = ORIENTED_EDGE('',*,*,#215250,.T.); +#215250 = EDGE_CURVE('',#215243,#215251,#215253,.T.); +#215251 = VERTEX_POINT('',#215252); +#215252 = CARTESIAN_POINT('',(180.2616,-68.53705,1.585)); +#215253 = CIRCLE('',#215254,0.290999070188); +#215254 = AXIS2_PLACEMENT_3D('',#215255,#215256,#215257); +#215255 = CARTESIAN_POINT('',(180.04087650487,-68.34741456673,1.585)); +#215256 = DIRECTION('',(0.,0.,-1.)); +#215257 = DIRECTION('',(0.776945764738,0.629567533038,0.)); +#215258 = ORIENTED_EDGE('',*,*,#215259,.T.); +#215259 = EDGE_CURVE('',#215251,#215260,#215262,.T.); +#215260 = VERTEX_POINT('',#215261); +#215261 = CARTESIAN_POINT('',(180.196067,-68.600503,1.585)); +#215262 = LINE('',#215263,#215264); +#215263 = CARTESIAN_POINT('',(180.2616,-68.53705,1.585)); +#215264 = VECTOR('',#215265,1.); +#215265 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#215266 = ORIENTED_EDGE('',*,*,#215267,.T.); +#215267 = EDGE_CURVE('',#215260,#215268,#215270,.T.); +#215268 = VERTEX_POINT('',#215269); +#215269 = CARTESIAN_POINT('',(180.079182,-68.657765,1.585)); +#215270 = LINE('',#215271,#215272); +#215271 = CARTESIAN_POINT('',(180.196067,-68.600503,1.585)); +#215272 = VECTOR('',#215273,1.); +#215273 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#215274 = ORIENTED_EDGE('',*,*,#215275,.T.); +#215275 = EDGE_CURVE('',#215268,#215276,#215278,.T.); +#215276 = VERTEX_POINT('',#215277); +#215277 = CARTESIAN_POINT('',(179.408404,-68.652086,1.585)); +#215278 = CIRCLE('',#215279,0.967158496826); +#215279 = AXIS2_PLACEMENT_3D('',#215280,#215281,#215282); +#215280 = CARTESIAN_POINT('',(179.75147282772,-67.74781870686,1.585)); +#215281 = DIRECTION('',(-0.,0.,-1.)); +#215282 = DIRECTION('',(0.338837091703,-0.940845059128,-0.)); +#215283 = ORIENTED_EDGE('',*,*,#215284,.T.); +#215284 = EDGE_CURVE('',#215276,#215285,#215287,.T.); +#215285 = VERTEX_POINT('',#215286); +#215286 = CARTESIAN_POINT('',(179.299423,-68.595136,1.585)); +#215287 = LINE('',#215288,#215289); +#215288 = CARTESIAN_POINT('',(179.408404,-68.652086,1.585)); +#215289 = VECTOR('',#215290,1.); +#215290 = DIRECTION('',(-0.886283334198,0.463143445946,0.)); +#215291 = ORIENTED_EDGE('',*,*,#215292,.T.); +#215292 = EDGE_CURVE('',#215285,#215293,#215295,.T.); +#215293 = VERTEX_POINT('',#215294); +#215294 = CARTESIAN_POINT('',(179.23597,-68.529606,1.585)); +#215295 = LINE('',#215296,#215297); +#215296 = CARTESIAN_POINT('',(179.299423,-68.595136,1.585)); +#215297 = VECTOR('',#215298,1.); +#215298 = DIRECTION('',(-0.695630129574,0.718400113328,0.)); +#215299 = ORIENTED_EDGE('',*,*,#215300,.T.); +#215300 = EDGE_CURVE('',#215293,#215301,#215303,.T.); +#215301 = VERTEX_POINT('',#215302); +#215302 = CARTESIAN_POINT('',(179.241336,-68.156768,1.585)); +#215303 = CIRCLE('',#215304,0.291002094877); +#215304 = AXIS2_PLACEMENT_3D('',#215305,#215306,#215307); +#215305 = CARTESIAN_POINT('',(179.46206436573,-68.34640240558,1.585)); +#215306 = DIRECTION('',(0.,0.,-1.)); +#215307 = DIRECTION('',(-0.776950990098,-0.629561084396,-0.)); +#215308 = ORIENTED_EDGE('',*,*,#215309,.T.); +#215309 = EDGE_CURVE('',#215301,#215216,#215310,.T.); +#215310 = LINE('',#215311,#215312); +#215311 = CARTESIAN_POINT('',(179.241336,-68.156768,1.585)); +#215312 = VECTOR('',#215313,1.); +#215313 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#215314 = FACE_BOUND('',#215315,.F.); +#215315 = EDGE_LOOP('',(#215316,#215327,#215335,#215343,#215352,#215360, + #215368,#215377,#215385,#215393,#215402,#215410)); +#215316 = ORIENTED_EDGE('',*,*,#215317,.T.); +#215317 = EDGE_CURVE('',#215318,#215320,#215322,.T.); +#215318 = VERTEX_POINT('',#215319); +#215319 = CARTESIAN_POINT('',(180.034816,-68.179578,1.585)); +#215320 = VERTEX_POINT('',#215321); +#215321 = CARTESIAN_POINT('',(179.468121,-68.179578,1.585)); +#215322 = CIRCLE('',#215323,0.815450468383); +#215323 = AXIS2_PLACEMENT_3D('',#215324,#215325,#215326); +#215324 = CARTESIAN_POINT('',(179.7514685,-68.94421756255,1.585)); +#215325 = DIRECTION('',(0.,0.,1.)); +#215326 = DIRECTION('',(0.347473587895,0.937689770508,-0.)); +#215327 = ORIENTED_EDGE('',*,*,#215328,.T.); +#215328 = EDGE_CURVE('',#215320,#215329,#215331,.T.); +#215329 = VERTEX_POINT('',#215330); +#215330 = CARTESIAN_POINT('',(179.391134,-68.218072,1.585)); +#215331 = LINE('',#215332,#215333); +#215332 = CARTESIAN_POINT('',(179.468121,-68.179578,1.585)); +#215333 = VECTOR('',#215334,1.); +#215334 = DIRECTION('',(-0.894424867414,-0.447218242641,0.)); +#215335 = ORIENTED_EDGE('',*,*,#215336,.T.); +#215336 = EDGE_CURVE('',#215329,#215337,#215339,.T.); +#215337 = VERTEX_POINT('',#215338); +#215338 = CARTESIAN_POINT('',(179.360727,-68.248479,1.585)); +#215339 = LINE('',#215340,#215341); +#215340 = CARTESIAN_POINT('',(179.391134,-68.218072,1.585)); +#215341 = VECTOR('',#215342,1.); +#215342 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#215343 = ORIENTED_EDGE('',*,*,#215344,.T.); +#215344 = EDGE_CURVE('',#215337,#215345,#215347,.T.); +#215345 = VERTEX_POINT('',#215346); +#215346 = CARTESIAN_POINT('',(179.360727,-68.445339,1.585)); +#215347 = CIRCLE('',#215348,0.148516804184); +#215348 = AXIS2_PLACEMENT_3D('',#215349,#215350,#215351); +#215349 = CARTESIAN_POINT('',(179.471942,-68.346909,1.585)); +#215350 = DIRECTION('',(0.,0.,1.)); +#215351 = DIRECTION('',(-0.748837820819,0.662753286006,0.)); +#215352 = ORIENTED_EDGE('',*,*,#215353,.T.); +#215353 = EDGE_CURVE('',#215345,#215354,#215356,.T.); +#215354 = VERTEX_POINT('',#215355); +#215355 = CARTESIAN_POINT('',(179.391134,-68.475746,1.585)); +#215356 = LINE('',#215357,#215358); +#215357 = CARTESIAN_POINT('',(179.360727,-68.445339,1.585)); +#215358 = VECTOR('',#215359,1.); +#215359 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#215360 = ORIENTED_EDGE('',*,*,#215361,.T.); +#215361 = EDGE_CURVE('',#215354,#215362,#215364,.T.); +#215362 = VERTEX_POINT('',#215363); +#215363 = CARTESIAN_POINT('',(179.468121,-68.514239,1.585)); +#215364 = LINE('',#215365,#215366); +#215365 = CARTESIAN_POINT('',(179.391134,-68.475746,1.585)); +#215366 = VECTOR('',#215367,1.); +#215367 = DIRECTION('',(0.894429514574,-0.447208948322,0.)); +#215368 = ORIENTED_EDGE('',*,*,#215369,.T.); +#215369 = EDGE_CURVE('',#215362,#215370,#215372,.T.); +#215370 = VERTEX_POINT('',#215371); +#215371 = CARTESIAN_POINT('',(180.034816,-68.514239,1.585)); +#215372 = CIRCLE('',#215373,0.815433004022); +#215373 = AXIS2_PLACEMENT_3D('',#215374,#215375,#215376); +#215374 = CARTESIAN_POINT('',(179.7514685,-67.74961806235,1.585)); +#215375 = DIRECTION('',(0.,0.,1.)); +#215376 = DIRECTION('',(-0.347481029836,-0.937687012763,0.)); +#215377 = ORIENTED_EDGE('',*,*,#215378,.T.); +#215378 = EDGE_CURVE('',#215370,#215379,#215381,.T.); +#215379 = VERTEX_POINT('',#215380); +#215380 = CARTESIAN_POINT('',(180.111803,-68.475745,1.585)); +#215381 = LINE('',#215382,#215383); +#215382 = CARTESIAN_POINT('',(180.034816,-68.514239,1.585)); +#215383 = VECTOR('',#215384,1.); +#215384 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#215385 = ORIENTED_EDGE('',*,*,#215386,.T.); +#215386 = EDGE_CURVE('',#215379,#215387,#215389,.T.); +#215387 = VERTEX_POINT('',#215388); +#215388 = CARTESIAN_POINT('',(180.142211,-68.445338,1.585)); +#215389 = LINE('',#215390,#215391); +#215390 = CARTESIAN_POINT('',(180.111803,-68.475745,1.585)); +#215391 = VECTOR('',#215392,1.); +#215392 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#215393 = ORIENTED_EDGE('',*,*,#215394,.T.); +#215394 = EDGE_CURVE('',#215387,#215395,#215397,.T.); +#215395 = VERTEX_POINT('',#215396); +#215396 = CARTESIAN_POINT('',(180.142211,-68.248479,1.585)); +#215397 = CIRCLE('',#215398,0.148515070089); +#215398 = AXIS2_PLACEMENT_3D('',#215399,#215400,#215401); +#215399 = CARTESIAN_POINT('',(180.03099787319,-68.3469085,1.585)); +#215400 = DIRECTION('',(0.,-0.,1.)); +#215401 = DIRECTION('',(0.748833951572,-0.6627576578,-0.)); +#215402 = ORIENTED_EDGE('',*,*,#215403,.T.); +#215403 = EDGE_CURVE('',#215395,#215404,#215406,.T.); +#215404 = VERTEX_POINT('',#215405); +#215405 = CARTESIAN_POINT('',(180.111803,-68.218072,1.585)); +#215406 = LINE('',#215407,#215408); +#215407 = CARTESIAN_POINT('',(180.142211,-68.248479,1.585)); +#215408 = VECTOR('',#215409,1.); +#215409 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#215410 = ORIENTED_EDGE('',*,*,#215411,.T.); +#215411 = EDGE_CURVE('',#215404,#215318,#215412,.T.); +#215412 = LINE('',#215413,#215414); +#215413 = CARTESIAN_POINT('',(180.111803,-68.218072,1.585)); +#215414 = VECTOR('',#215415,1.); +#215415 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#215416 = PLANE('',#215417); +#215417 = AXIS2_PLACEMENT_3D('',#215418,#215419,#215420); +#215418 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215419 = DIRECTION('',(0.,0.,1.)); +#215420 = DIRECTION('',(1.,0.,-0.)); +#215421 = SHELL_BASED_SURFACE_MODEL('',(#215422)); +#215422 = OPEN_SHELL('',(#215423)); +#215423 = ADVANCED_FACE('',(#215424),#215558,.T.); +#215424 = FACE_BOUND('',#215425,.F.); +#215425 = EDGE_LOOP('',(#215426,#215436,#215444,#215453,#215461,#215469, + #215478,#215486,#215495,#215503,#215511,#215519,#215527,#215536, + #215544,#215552)); +#215426 = ORIENTED_EDGE('',*,*,#215427,.T.); +#215427 = EDGE_CURVE('',#215428,#215430,#215432,.T.); +#215428 = VERTEX_POINT('',#215429); +#215429 = CARTESIAN_POINT('',(89.662371,-66.874941,1.585)); +#215430 = VERTEX_POINT('',#215431); +#215431 = CARTESIAN_POINT('',(89.700827,-66.85436,1.585)); +#215432 = LINE('',#215433,#215434); +#215433 = CARTESIAN_POINT('',(89.662371,-66.874941,1.585)); +#215434 = VECTOR('',#215435,1.); +#215435 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#215436 = ORIENTED_EDGE('',*,*,#215437,.T.); +#215437 = EDGE_CURVE('',#215430,#215438,#215440,.T.); +#215438 = VERTEX_POINT('',#215439); +#215439 = CARTESIAN_POINT('',(89.722664,-66.85436,1.585)); +#215440 = LINE('',#215441,#215442); +#215441 = CARTESIAN_POINT('',(89.700827,-66.85436,1.585)); +#215442 = VECTOR('',#215443,1.); +#215443 = DIRECTION('',(1.,0.,0.)); +#215444 = ORIENTED_EDGE('',*,*,#215445,.T.); +#215445 = EDGE_CURVE('',#215438,#215446,#215448,.T.); +#215446 = VERTEX_POINT('',#215447); +#215447 = CARTESIAN_POINT('',(89.790459,-66.927919,1.585)); +#215448 = CIRCLE('',#215449,7.216898094229E-02); +#215449 = AXIS2_PLACEMENT_3D('',#215450,#215451,#215452); +#215450 = CARTESIAN_POINT('',(89.718306063893,-66.92639728342,1.585)); +#215451 = DIRECTION('',(0.,0.,-1.)); +#215452 = DIRECTION('',(6.038516895284E-02,0.998175150648,0.)); +#215453 = ORIENTED_EDGE('',*,*,#215454,.T.); +#215454 = EDGE_CURVE('',#215446,#215455,#215457,.T.); +#215455 = VERTEX_POINT('',#215456); +#215456 = CARTESIAN_POINT('',(89.790459,-67.852919,1.585)); +#215457 = LINE('',#215458,#215459); +#215458 = CARTESIAN_POINT('',(89.790459,-66.927919,1.585)); +#215459 = VECTOR('',#215460,1.); +#215460 = DIRECTION('',(0.,-1.,0.)); +#215461 = ORIENTED_EDGE('',*,*,#215462,.T.); +#215462 = EDGE_CURVE('',#215455,#215463,#215465,.T.); +#215463 = VERTEX_POINT('',#215464); +#215464 = CARTESIAN_POINT('',(90.015805,-67.85436,1.585)); +#215465 = LINE('',#215466,#215467); +#215466 = CARTESIAN_POINT('',(89.790459,-67.852919,1.585)); +#215467 = VECTOR('',#215468,1.); +#215468 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#215469 = ORIENTED_EDGE('',*,*,#215470,.T.); +#215470 = EDGE_CURVE('',#215463,#215471,#215473,.T.); +#215471 = VERTEX_POINT('',#215472); +#215472 = CARTESIAN_POINT('',(90.001173,-68.002919,1.585)); +#215473 = CIRCLE('',#215474,7.500006711464E-02); +#215474 = AXIS2_PLACEMENT_3D('',#215475,#215476,#215477); +#215475 = CARTESIAN_POINT('',(90.001173067115,-67.92791893288,1.585)); +#215476 = DIRECTION('',(0.,0.,-1.)); +#215477 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#215478 = ORIENTED_EDGE('',*,*,#215479,.T.); +#215479 = EDGE_CURVE('',#215471,#215480,#215482,.T.); +#215480 = VERTEX_POINT('',#215481); +#215481 = CARTESIAN_POINT('',(89.415113,-68.001478,1.585)); +#215482 = LINE('',#215483,#215484); +#215483 = CARTESIAN_POINT('',(90.001173,-68.002919,1.585)); +#215484 = VECTOR('',#215485,1.); +#215485 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#215486 = ORIENTED_EDGE('',*,*,#215487,.T.); +#215487 = EDGE_CURVE('',#215480,#215488,#215490,.T.); +#215488 = VERTEX_POINT('',#215489); +#215489 = CARTESIAN_POINT('',(89.429745,-67.852919,1.585)); +#215490 = CIRCLE('',#215491,7.500006711464E-02); +#215491 = AXIS2_PLACEMENT_3D('',#215492,#215493,#215494); +#215492 = CARTESIAN_POINT('',(89.429744932885,-67.92791906711,1.585)); +#215493 = DIRECTION('',(0.,0.,-1.)); +#215494 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#215495 = ORIENTED_EDGE('',*,*,#215496,.T.); +#215496 = EDGE_CURVE('',#215488,#215497,#215499,.T.); +#215497 = VERTEX_POINT('',#215498); +#215498 = CARTESIAN_POINT('',(89.640459,-67.852919,1.585)); +#215499 = LINE('',#215500,#215501); +#215500 = CARTESIAN_POINT('',(89.429745,-67.852919,1.585)); +#215501 = VECTOR('',#215502,1.); +#215502 = DIRECTION('',(1.,0.,0.)); +#215503 = ORIENTED_EDGE('',*,*,#215504,.T.); +#215504 = EDGE_CURVE('',#215497,#215505,#215507,.T.); +#215505 = VERTEX_POINT('',#215506); +#215506 = CARTESIAN_POINT('',(89.640459,-67.156604,1.585)); +#215507 = LINE('',#215508,#215509); +#215508 = CARTESIAN_POINT('',(89.640459,-67.852919,1.585)); +#215509 = VECTOR('',#215510,1.); +#215510 = DIRECTION('',(0.,1.,0.)); +#215511 = ORIENTED_EDGE('',*,*,#215512,.T.); +#215512 = EDGE_CURVE('',#215505,#215513,#215515,.T.); +#215513 = VERTEX_POINT('',#215514); +#215514 = CARTESIAN_POINT('',(89.564823,-67.229131,1.585)); +#215515 = LINE('',#215516,#215517); +#215516 = CARTESIAN_POINT('',(89.640459,-67.156604,1.585)); +#215517 = VECTOR('',#215518,1.); +#215518 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#215519 = ORIENTED_EDGE('',*,*,#215520,.T.); +#215520 = EDGE_CURVE('',#215513,#215521,#215523,.T.); +#215521 = VERTEX_POINT('',#215522); +#215522 = CARTESIAN_POINT('',(89.449554,-67.28597,1.585)); +#215523 = LINE('',#215524,#215525); +#215524 = CARTESIAN_POINT('',(89.564823,-67.229131,1.585)); +#215525 = VECTOR('',#215526,1.); +#215526 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#215527 = ORIENTED_EDGE('',*,*,#215528,.T.); +#215528 = EDGE_CURVE('',#215521,#215529,#215531,.T.); +#215529 = VERTEX_POINT('',#215530); +#215530 = CARTESIAN_POINT('',(89.396204,-67.146551,1.585)); +#215531 = CIRCLE('',#215532,7.500005272362E-02); +#215532 = AXIS2_PLACEMENT_3D('',#215533,#215534,#215535); +#215533 = CARTESIAN_POINT('',(89.42974455676,-67.21363332972,1.585)); +#215534 = DIRECTION('',(0.,0.,-1.)); +#215535 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#215536 = ORIENTED_EDGE('',*,*,#215537,.T.); +#215537 = EDGE_CURVE('',#215529,#215538,#215540,.T.); +#215538 = VERTEX_POINT('',#215539); +#215539 = CARTESIAN_POINT('',(89.480556,-67.104375,1.585)); +#215540 = LINE('',#215541,#215542); +#215541 = CARTESIAN_POINT('',(89.396204,-67.146551,1.585)); +#215542 = VECTOR('',#215543,1.); +#215543 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#215544 = ORIENTED_EDGE('',*,*,#215545,.T.); +#215545 = EDGE_CURVE('',#215538,#215546,#215548,.T.); +#215546 = VERTEX_POINT('',#215547); +#215547 = CARTESIAN_POINT('',(89.561935,-67.022996,1.585)); +#215548 = LINE('',#215549,#215550); +#215549 = CARTESIAN_POINT('',(89.480556,-67.104375,1.585)); +#215550 = VECTOR('',#215551,1.); +#215551 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#215552 = ORIENTED_EDGE('',*,*,#215553,.T.); +#215553 = EDGE_CURVE('',#215546,#215428,#215554,.T.); +#215554 = LINE('',#215555,#215556); +#215555 = CARTESIAN_POINT('',(89.561935,-67.022996,1.585)); +#215556 = VECTOR('',#215557,1.); +#215557 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#215558 = PLANE('',#215559); +#215559 = AXIS2_PLACEMENT_3D('',#215560,#215561,#215562); +#215560 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215561 = DIRECTION('',(0.,0.,1.)); +#215562 = DIRECTION('',(1.,0.,-0.)); +#215563 = SHELL_BASED_SURFACE_MODEL('',(#215564)); +#215564 = OPEN_SHELL('',(#215565)); +#215565 = ADVANCED_FACE('',(#215566),#215751,.T.); +#215566 = FACE_BOUND('',#215567,.F.); +#215567 = EDGE_LOOP('',(#215568,#215579,#215587,#215596,#215604,#215613, + #215621,#215630,#215638,#215646,#215654,#215663,#215671,#215680, + #215688,#215697,#215705,#215713,#215721,#215729,#215737,#215745)); +#215568 = ORIENTED_EDGE('',*,*,#215569,.T.); +#215569 = EDGE_CURVE('',#215570,#215572,#215574,.T.); +#215570 = VERTEX_POINT('',#215571); +#215571 = CARTESIAN_POINT('',(88.583078,-66.910381,1.585)); +#215572 = VERTEX_POINT('',#215573); +#215573 = CARTESIAN_POINT('',(89.042841,-66.913178,1.585)); +#215574 = CIRCLE('',#215575,0.460785175821); +#215575 = AXIS2_PLACEMENT_3D('',#215576,#215577,#215578); +#215576 = CARTESIAN_POINT('',(88.810530108972,-67.31111597024,1.585)); +#215577 = DIRECTION('',(0.,0.,-1.)); +#215578 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#215579 = ORIENTED_EDGE('',*,*,#215580,.T.); +#215580 = EDGE_CURVE('',#215572,#215581,#215583,.T.); +#215581 = VERTEX_POINT('',#215582); +#215582 = CARTESIAN_POINT('',(89.111152,-66.981489,1.585)); +#215583 = LINE('',#215584,#215585); +#215584 = CARTESIAN_POINT('',(89.042841,-66.913178,1.585)); +#215585 = VECTOR('',#215586,1.); +#215586 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#215587 = ORIENTED_EDGE('',*,*,#215588,.T.); +#215588 = EDGE_CURVE('',#215581,#215589,#215591,.T.); +#215589 = VERTEX_POINT('',#215590); +#215590 = CARTESIAN_POINT('',(88.995759,-67.07619,1.585)); +#215591 = CIRCLE('',#215592,7.500003178655E-02); +#215592 = AXIS2_PLACEMENT_3D('',#215593,#215594,#215595); +#215593 = CARTESIAN_POINT('',(89.048791562127,-67.0231565,1.585)); +#215594 = DIRECTION('',(0.,0.,-1.)); +#215595 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#215596 = ORIENTED_EDGE('',*,*,#215597,.T.); +#215597 = EDGE_CURVE('',#215589,#215598,#215600,.T.); +#215598 = VERTEX_POINT('',#215599); +#215599 = CARTESIAN_POINT('',(88.960659,-67.04109,1.585)); +#215600 = LINE('',#215601,#215602); +#215601 = CARTESIAN_POINT('',(88.995759,-67.07619,1.585)); +#215602 = VECTOR('',#215603,1.); +#215603 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#215604 = ORIENTED_EDGE('',*,*,#215605,.T.); +#215605 = EDGE_CURVE('',#215598,#215606,#215608,.T.); +#215606 = VERTEX_POINT('',#215607); +#215607 = CARTESIAN_POINT('',(88.660735,-67.04109,1.585)); +#215608 = CIRCLE('',#215609,0.299308637371); +#215609 = AXIS2_PLACEMENT_3D('',#215610,#215611,#215612); +#215610 = CARTESIAN_POINT('',(88.810697,-67.300121,1.585)); +#215611 = DIRECTION('',(0.,0.,1.)); +#215612 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#215613 = ORIENTED_EDGE('',*,*,#215614,.T.); +#215614 = EDGE_CURVE('',#215606,#215615,#215617,.T.); +#215615 = VERTEX_POINT('',#215616); +#215616 = CARTESIAN_POINT('',(88.586622,-67.115203,1.585)); +#215617 = LINE('',#215618,#215619); +#215618 = CARTESIAN_POINT('',(88.660735,-67.04109,1.585)); +#215619 = VECTOR('',#215620,1.); +#215620 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#215621 = ORIENTED_EDGE('',*,*,#215622,.T.); +#215622 = EDGE_CURVE('',#215615,#215623,#215625,.T.); +#215623 = VERTEX_POINT('',#215624); +#215624 = CARTESIAN_POINT('',(88.504745,-67.490113,1.585)); +#215625 = CIRCLE('',#215626,0.611712714363); +#215626 = AXIS2_PLACEMENT_3D('',#215627,#215628,#215629); +#215627 = CARTESIAN_POINT('',(89.113150275217,-67.4265876822,1.585)); +#215628 = DIRECTION('',(0.,0.,1.)); +#215629 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#215630 = ORIENTED_EDGE('',*,*,#215631,.T.); +#215631 = EDGE_CURVE('',#215623,#215632,#215634,.T.); +#215632 = VERTEX_POINT('',#215633); +#215633 = CARTESIAN_POINT('',(88.548128,-67.663647,1.585)); +#215634 = LINE('',#215635,#215636); +#215635 = CARTESIAN_POINT('',(88.504745,-67.490113,1.585)); +#215636 = VECTOR('',#215637,1.); +#215637 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#215638 = ORIENTED_EDGE('',*,*,#215639,.T.); +#215639 = EDGE_CURVE('',#215632,#215640,#215642,.T.); +#215640 = VERTEX_POINT('',#215641); +#215641 = CARTESIAN_POINT('',(88.586622,-67.740634,1.585)); +#215642 = LINE('',#215643,#215644); +#215643 = CARTESIAN_POINT('',(88.548128,-67.663647,1.585)); +#215644 = VECTOR('',#215645,1.); +#215645 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#215646 = ORIENTED_EDGE('',*,*,#215647,.T.); +#215647 = EDGE_CURVE('',#215640,#215648,#215650,.T.); +#215648 = VERTEX_POINT('',#215649); +#215649 = CARTESIAN_POINT('',(88.660735,-67.814748,1.585)); +#215650 = LINE('',#215651,#215652); +#215651 = CARTESIAN_POINT('',(88.586622,-67.740634,1.585)); +#215652 = VECTOR('',#215653,1.); +#215653 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#215654 = ORIENTED_EDGE('',*,*,#215655,.T.); +#215655 = EDGE_CURVE('',#215648,#215656,#215658,.T.); +#215656 = VERTEX_POINT('',#215657); +#215657 = CARTESIAN_POINT('',(88.960659,-67.814747,1.585)); +#215658 = CIRCLE('',#215659,0.299305962385); +#215659 = AXIS2_PLACEMENT_3D('',#215660,#215661,#215662); +#215660 = CARTESIAN_POINT('',(88.810696136355,-67.55571959093,1.585)); +#215661 = DIRECTION('',(0.,0.,1.)); +#215662 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#215663 = ORIENTED_EDGE('',*,*,#215664,.T.); +#215664 = EDGE_CURVE('',#215656,#215665,#215667,.T.); +#215665 = VERTEX_POINT('',#215666); +#215666 = CARTESIAN_POINT('',(89.007124,-67.77032,1.585)); +#215667 = LINE('',#215668,#215669); +#215668 = CARTESIAN_POINT('',(88.960659,-67.814747,1.585)); +#215669 = VECTOR('',#215670,1.); +#215670 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#215671 = ORIENTED_EDGE('',*,*,#215672,.T.); +#215672 = EDGE_CURVE('',#215665,#215673,#215675,.T.); +#215673 = VERTEX_POINT('',#215674); +#215674 = CARTESIAN_POINT('',(89.101825,-67.885713,1.585)); +#215675 = CIRCLE('',#215676,7.499993690111E-02); +#215676 = AXIS2_PLACEMENT_3D('',#215677,#215678,#215679); +#215677 = CARTESIAN_POINT('',(89.048792248309,-67.83267982374,1.585)); +#215678 = DIRECTION('',(0.,0.,-1.)); +#215679 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#215680 = ORIENTED_EDGE('',*,*,#215681,.T.); +#215681 = EDGE_CURVE('',#215673,#215682,#215684,.T.); +#215682 = VERTEX_POINT('',#215683); +#215683 = CARTESIAN_POINT('',(89.038315,-67.945457,1.585)); +#215684 = LINE('',#215685,#215686); +#215685 = CARTESIAN_POINT('',(89.101825,-67.885713,1.585)); +#215686 = VECTOR('',#215687,1.); +#215687 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#215688 = ORIENTED_EDGE('',*,*,#215689,.T.); +#215689 = EDGE_CURVE('',#215682,#215690,#215692,.T.); +#215690 = VERTEX_POINT('',#215691); +#215691 = CARTESIAN_POINT('',(88.578553,-67.942661,1.585)); +#215692 = CIRCLE('',#215693,0.461067828848); +#215693 = AXIS2_PLACEMENT_3D('',#215694,#215695,#215696); +#215694 = CARTESIAN_POINT('',(88.810864512688,-67.54439613352,1.585)); +#215695 = DIRECTION('',(-0.,0.,-1.)); +#215696 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#215697 = ORIENTED_EDGE('',*,*,#215698,.T.); +#215698 = EDGE_CURVE('',#215690,#215699,#215701,.T.); +#215699 = VERTEX_POINT('',#215700); +#215700 = CARTESIAN_POINT('',(88.461864,-67.824898,1.585)); +#215701 = LINE('',#215702,#215703); +#215702 = CARTESIAN_POINT('',(88.578553,-67.942661,1.585)); +#215703 = VECTOR('',#215704,1.); +#215704 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#215705 = ORIENTED_EDGE('',*,*,#215706,.T.); +#215706 = EDGE_CURVE('',#215699,#215707,#215709,.T.); +#215707 = VERTEX_POINT('',#215708); +#215708 = CARTESIAN_POINT('',(88.404603,-67.708013,1.585)); +#215709 = LINE('',#215710,#215711); +#215710 = CARTESIAN_POINT('',(88.461864,-67.824898,1.585)); +#215711 = VECTOR('',#215712,1.); +#215712 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#215713 = ORIENTED_EDGE('',*,*,#215714,.T.); +#215714 = EDGE_CURVE('',#215707,#215715,#215717,.T.); +#215715 = VERTEX_POINT('',#215716); +#215716 = CARTESIAN_POINT('',(88.354745,-67.499347,1.585)); +#215717 = LINE('',#215718,#215719); +#215718 = CARTESIAN_POINT('',(88.404603,-67.708013,1.585)); +#215719 = VECTOR('',#215720,1.); +#215720 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#215721 = ORIENTED_EDGE('',*,*,#215722,.T.); +#215722 = EDGE_CURVE('',#215715,#215723,#215725,.T.); +#215723 = VERTEX_POINT('',#215724); +#215724 = CARTESIAN_POINT('',(88.356984,-67.3383,1.585)); +#215725 = LINE('',#215726,#215727); +#215726 = CARTESIAN_POINT('',(88.354745,-67.499347,1.585)); +#215727 = VECTOR('',#215728,1.); +#215728 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#215729 = ORIENTED_EDGE('',*,*,#215730,.T.); +#215730 = EDGE_CURVE('',#215723,#215731,#215733,.T.); +#215731 = VERTEX_POINT('',#215732); +#215732 = CARTESIAN_POINT('',(88.410282,-67.132473,1.585)); +#215733 = LINE('',#215734,#215735); +#215734 = CARTESIAN_POINT('',(88.356984,-67.3383,1.585)); +#215735 = VECTOR('',#215736,1.); +#215736 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#215737 = ORIENTED_EDGE('',*,*,#215738,.T.); +#215738 = EDGE_CURVE('',#215731,#215739,#215741,.T.); +#215739 = VERTEX_POINT('',#215740); +#215740 = CARTESIAN_POINT('',(88.467231,-67.023492,1.585)); +#215741 = LINE('',#215742,#215743); +#215742 = CARTESIAN_POINT('',(88.410282,-67.132473,1.585)); +#215743 = VECTOR('',#215744,1.); +#215744 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#215745 = ORIENTED_EDGE('',*,*,#215746,.T.); +#215746 = EDGE_CURVE('',#215739,#215570,#215747,.T.); +#215747 = LINE('',#215748,#215749); +#215748 = CARTESIAN_POINT('',(88.467231,-67.023492,1.585)); +#215749 = VECTOR('',#215750,1.); +#215750 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#215751 = PLANE('',#215752); +#215752 = AXIS2_PLACEMENT_3D('',#215753,#215754,#215755); +#215753 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215754 = DIRECTION('',(0.,0.,1.)); +#215755 = DIRECTION('',(1.,0.,-0.)); +#215756 = SHELL_BASED_SURFACE_MODEL('',(#215757)); +#215757 = OPEN_SHELL('',(#215758)); +#215758 = ADVANCED_FACE('',(#215759,#215861),#215963,.T.); +#215759 = FACE_BOUND('',#215760,.F.); +#215760 = EDGE_LOOP('',(#215761,#215772,#215780,#215788,#215797,#215805, + #215813,#215822,#215830,#215838,#215847,#215855)); +#215761 = ORIENTED_EDGE('',*,*,#215762,.T.); +#215762 = EDGE_CURVE('',#215763,#215765,#215767,.T.); +#215763 = VERTEX_POINT('',#215764); +#215764 = CARTESIAN_POINT('',(90.485142,-66.91242,1.585)); +#215765 = VERTEX_POINT('',#215766); +#215766 = CARTESIAN_POINT('',(90.85798,-66.917786,1.585)); +#215767 = CIRCLE('',#215768,0.291788488016); +#215768 = AXIS2_PLACEMENT_3D('',#215769,#215770,#215771); +#215769 = CARTESIAN_POINT('',(90.66833086911,-67.13953750256,1.585)); +#215770 = DIRECTION('',(0.,0.,-1.)); +#215771 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#215772 = ORIENTED_EDGE('',*,*,#215773,.T.); +#215773 = EDGE_CURVE('',#215765,#215774,#215776,.T.); +#215774 = VERTEX_POINT('',#215775); +#215775 = CARTESIAN_POINT('',(90.921433,-66.983316,1.585)); +#215776 = LINE('',#215777,#215778); +#215777 = CARTESIAN_POINT('',(90.85798,-66.917786,1.585)); +#215778 = VECTOR('',#215779,1.); +#215779 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#215780 = ORIENTED_EDGE('',*,*,#215781,.T.); +#215781 = EDGE_CURVE('',#215774,#215782,#215784,.T.); +#215782 = VERTEX_POINT('',#215783); +#215783 = CARTESIAN_POINT('',(90.978696,-67.100205,1.585)); +#215784 = LINE('',#215785,#215786); +#215785 = CARTESIAN_POINT('',(90.921433,-66.983316,1.585)); +#215786 = VECTOR('',#215787,1.); +#215787 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#215788 = ORIENTED_EDGE('',*,*,#215789,.T.); +#215789 = EDGE_CURVE('',#215782,#215790,#215792,.T.); +#215790 = VERTEX_POINT('',#215791); +#215791 = CARTESIAN_POINT('',(90.973017,-67.770983,1.585)); +#215792 = CIRCLE('',#215793,0.967158496826); +#215793 = AXIS2_PLACEMENT_3D('',#215794,#215795,#215796); +#215794 = CARTESIAN_POINT('',(90.068749706867,-67.42791417228,1.585)); +#215795 = DIRECTION('',(0.,0.,-1.)); +#215796 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#215797 = ORIENTED_EDGE('',*,*,#215798,.T.); +#215798 = EDGE_CURVE('',#215790,#215799,#215801,.T.); +#215799 = VERTEX_POINT('',#215800); +#215800 = CARTESIAN_POINT('',(90.916067,-67.879963,1.585)); +#215801 = LINE('',#215802,#215803); +#215802 = CARTESIAN_POINT('',(90.973017,-67.770983,1.585)); +#215803 = VECTOR('',#215804,1.); +#215804 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#215805 = ORIENTED_EDGE('',*,*,#215806,.T.); +#215806 = EDGE_CURVE('',#215799,#215807,#215809,.T.); +#215807 = VERTEX_POINT('',#215808); +#215808 = CARTESIAN_POINT('',(90.850537,-67.943417,1.585)); +#215809 = LINE('',#215810,#215811); +#215810 = CARTESIAN_POINT('',(90.916067,-67.879963,1.585)); +#215811 = VECTOR('',#215812,1.); +#215812 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#215813 = ORIENTED_EDGE('',*,*,#215814,.T.); +#215814 = EDGE_CURVE('',#215807,#215815,#215817,.T.); +#215815 = VERTEX_POINT('',#215816); +#215816 = CARTESIAN_POINT('',(90.477698,-67.93805,1.585)); +#215817 = CIRCLE('',#215818,0.290998264264); +#215818 = AXIS2_PLACEMENT_3D('',#215819,#215820,#215821); +#215819 = CARTESIAN_POINT('',(90.667333418158,-67.71732755441,1.585)); +#215820 = DIRECTION('',(-0.,0.,-1.)); +#215821 = DIRECTION('',(0.629569328552,-0.77694430981,-0.)); +#215822 = ORIENTED_EDGE('',*,*,#215823,.T.); +#215823 = EDGE_CURVE('',#215815,#215824,#215826,.T.); +#215824 = VERTEX_POINT('',#215825); +#215825 = CARTESIAN_POINT('',(90.414245,-67.872517,1.585)); +#215826 = LINE('',#215827,#215828); +#215827 = CARTESIAN_POINT('',(90.477698,-67.93805,1.585)); +#215828 = VECTOR('',#215829,1.); +#215829 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#215830 = ORIENTED_EDGE('',*,*,#215831,.T.); +#215831 = EDGE_CURVE('',#215824,#215832,#215834,.T.); +#215832 = VERTEX_POINT('',#215833); +#215833 = CARTESIAN_POINT('',(90.356984,-67.755632,1.585)); +#215834 = LINE('',#215835,#215836); +#215835 = CARTESIAN_POINT('',(90.414245,-67.872517,1.585)); +#215836 = VECTOR('',#215837,1.); +#215837 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#215838 = ORIENTED_EDGE('',*,*,#215839,.T.); +#215839 = EDGE_CURVE('',#215832,#215840,#215842,.T.); +#215840 = VERTEX_POINT('',#215841); +#215841 = CARTESIAN_POINT('',(90.362663,-67.084854,1.585)); +#215842 = CIRCLE('',#215843,0.967158496826); +#215843 = AXIS2_PLACEMENT_3D('',#215844,#215845,#215846); +#215844 = CARTESIAN_POINT('',(91.266930293133,-67.42792282772,1.585)); +#215845 = DIRECTION('',(0.,0.,-1.)); +#215846 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#215847 = ORIENTED_EDGE('',*,*,#215848,.T.); +#215848 = EDGE_CURVE('',#215840,#215849,#215851,.T.); +#215849 = VERTEX_POINT('',#215850); +#215850 = CARTESIAN_POINT('',(90.419612,-66.975873,1.585)); +#215851 = LINE('',#215852,#215853); +#215852 = CARTESIAN_POINT('',(90.362663,-67.084854,1.585)); +#215853 = VECTOR('',#215854,1.); +#215854 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#215855 = ORIENTED_EDGE('',*,*,#215856,.T.); +#215856 = EDGE_CURVE('',#215849,#215763,#215857,.T.); +#215857 = LINE('',#215858,#215859); +#215858 = CARTESIAN_POINT('',(90.419612,-66.975873,1.585)); +#215859 = VECTOR('',#215860,1.); +#215860 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#215861 = FACE_BOUND('',#215862,.F.); +#215862 = EDGE_LOOP('',(#215863,#215874,#215882,#215890,#215899,#215907, + #215915,#215924,#215932,#215940,#215949,#215957)); +#215863 = ORIENTED_EDGE('',*,*,#215864,.T.); +#215864 = EDGE_CURVE('',#215865,#215867,#215869,.T.); +#215865 = VERTEX_POINT('',#215866); +#215866 = CARTESIAN_POINT('',(90.76627,-67.037177,1.585)); +#215867 = VERTEX_POINT('',#215868); +#215868 = CARTESIAN_POINT('',(90.56941,-67.037177,1.585)); +#215869 = CIRCLE('',#215870,0.148516804184); +#215870 = AXIS2_PLACEMENT_3D('',#215871,#215872,#215873); +#215871 = CARTESIAN_POINT('',(90.66784,-67.148392,1.585)); +#215872 = DIRECTION('',(0.,0.,1.)); +#215873 = DIRECTION('',(0.662753286006,0.748837820819,-0.)); +#215874 = ORIENTED_EDGE('',*,*,#215875,.T.); +#215875 = EDGE_CURVE('',#215867,#215876,#215878,.T.); +#215876 = VERTEX_POINT('',#215877); +#215877 = CARTESIAN_POINT('',(90.539003,-67.067584,1.585)); +#215878 = LINE('',#215879,#215880); +#215879 = CARTESIAN_POINT('',(90.56941,-67.037177,1.585)); +#215880 = VECTOR('',#215881,1.); +#215881 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#215882 = ORIENTED_EDGE('',*,*,#215883,.T.); +#215883 = EDGE_CURVE('',#215876,#215884,#215886,.T.); +#215884 = VERTEX_POINT('',#215885); +#215885 = CARTESIAN_POINT('',(90.500509,-67.144571,1.585)); +#215886 = LINE('',#215887,#215888); +#215887 = CARTESIAN_POINT('',(90.539003,-67.067584,1.585)); +#215888 = VECTOR('',#215889,1.); +#215889 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#215890 = ORIENTED_EDGE('',*,*,#215891,.T.); +#215891 = EDGE_CURVE('',#215884,#215892,#215894,.T.); +#215892 = VERTEX_POINT('',#215893); +#215893 = CARTESIAN_POINT('',(90.500509,-67.711266,1.585)); +#215894 = CIRCLE('',#215895,0.815450468384); +#215895 = AXIS2_PLACEMENT_3D('',#215896,#215897,#215898); +#215896 = CARTESIAN_POINT('',(91.265148562559,-67.4279185,1.585)); +#215897 = DIRECTION('',(0.,0.,1.)); +#215898 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#215899 = ORIENTED_EDGE('',*,*,#215900,.T.); +#215900 = EDGE_CURVE('',#215892,#215901,#215903,.T.); +#215901 = VERTEX_POINT('',#215902); +#215902 = CARTESIAN_POINT('',(90.539003,-67.788253,1.585)); +#215903 = LINE('',#215904,#215905); +#215904 = CARTESIAN_POINT('',(90.500509,-67.711266,1.585)); +#215905 = VECTOR('',#215906,1.); +#215906 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#215907 = ORIENTED_EDGE('',*,*,#215908,.T.); +#215908 = EDGE_CURVE('',#215901,#215909,#215911,.T.); +#215909 = VERTEX_POINT('',#215910); +#215910 = CARTESIAN_POINT('',(90.56941,-67.818661,1.585)); +#215911 = LINE('',#215912,#215913); +#215912 = CARTESIAN_POINT('',(90.539003,-67.788253,1.585)); +#215913 = VECTOR('',#215914,1.); +#215914 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#215915 = ORIENTED_EDGE('',*,*,#215916,.T.); +#215916 = EDGE_CURVE('',#215909,#215917,#215919,.T.); +#215917 = VERTEX_POINT('',#215918); +#215918 = CARTESIAN_POINT('',(90.766269,-67.818661,1.585)); +#215919 = CIRCLE('',#215920,0.14851572397); +#215920 = AXIS2_PLACEMENT_3D('',#215921,#215922,#215923); +#215921 = CARTESIAN_POINT('',(90.6678395,-67.707447,1.585)); +#215922 = DIRECTION('',(0.,0.,1.)); +#215923 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#215924 = ORIENTED_EDGE('',*,*,#215925,.T.); +#215925 = EDGE_CURVE('',#215917,#215926,#215928,.T.); +#215926 = VERTEX_POINT('',#215927); +#215927 = CARTESIAN_POINT('',(90.796676,-67.788253,1.585)); +#215928 = LINE('',#215929,#215930); +#215929 = CARTESIAN_POINT('',(90.766269,-67.818661,1.585)); +#215930 = VECTOR('',#215931,1.); +#215931 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#215932 = ORIENTED_EDGE('',*,*,#215933,.T.); +#215933 = EDGE_CURVE('',#215926,#215934,#215936,.T.); +#215934 = VERTEX_POINT('',#215935); +#215935 = CARTESIAN_POINT('',(90.83517,-67.711266,1.585)); +#215936 = LINE('',#215937,#215938); +#215937 = CARTESIAN_POINT('',(90.796676,-67.788253,1.585)); +#215938 = VECTOR('',#215939,1.); +#215939 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#215940 = ORIENTED_EDGE('',*,*,#215941,.T.); +#215941 = EDGE_CURVE('',#215934,#215942,#215944,.T.); +#215942 = VERTEX_POINT('',#215943); +#215943 = CARTESIAN_POINT('',(90.83517,-67.144571,1.585)); +#215944 = CIRCLE('',#215945,0.815433004022); +#215945 = AXIS2_PLACEMENT_3D('',#215946,#215947,#215948); +#215946 = CARTESIAN_POINT('',(90.07054906235,-67.4279185,1.585)); +#215947 = DIRECTION('',(0.,-0.,1.)); +#215948 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#215949 = ORIENTED_EDGE('',*,*,#215950,.T.); +#215950 = EDGE_CURVE('',#215942,#215951,#215953,.T.); +#215951 = VERTEX_POINT('',#215952); +#215952 = CARTESIAN_POINT('',(90.796677,-67.067584,1.585)); +#215953 = LINE('',#215954,#215955); +#215954 = CARTESIAN_POINT('',(90.83517,-67.144571,1.585)); +#215955 = VECTOR('',#215956,1.); +#215956 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#215957 = ORIENTED_EDGE('',*,*,#215958,.T.); +#215958 = EDGE_CURVE('',#215951,#215865,#215959,.T.); +#215959 = LINE('',#215960,#215961); +#215960 = CARTESIAN_POINT('',(90.796677,-67.067584,1.585)); +#215961 = VECTOR('',#215962,1.); +#215962 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#215963 = PLANE('',#215964); +#215964 = AXIS2_PLACEMENT_3D('',#215965,#215966,#215967); +#215965 = CARTESIAN_POINT('',(0.,0.,1.585)); +#215966 = DIRECTION('',(0.,0.,1.)); +#215967 = DIRECTION('',(1.,0.,-0.)); +#215968 = SHELL_BASED_SURFACE_MODEL('',(#215969)); +#215969 = OPEN_SHELL('',(#215970)); +#215970 = ADVANCED_FACE('',(#215971),#216113,.T.); +#215971 = FACE_BOUND('',#215972,.F.); +#215972 = EDGE_LOOP('',(#215973,#215984,#215992,#216001,#216009,#216017, + #216025,#216033,#216041,#216049,#216057,#216065,#216073,#216082, + #216090,#216098,#216107)); +#215973 = ORIENTED_EDGE('',*,*,#215974,.T.); +#215974 = EDGE_CURVE('',#215975,#215977,#215979,.T.); +#215975 = VERTEX_POINT('',#215976); +#215976 = CARTESIAN_POINT('',(166.48165,-62.3131,1.585)); +#215977 = VERTEX_POINT('',#215978); +#215978 = CARTESIAN_POINT('',(166.54165,-62.2531,1.585)); +#215979 = CIRCLE('',#215980,5.999932016262E-02); +#215980 = AXIS2_PLACEMENT_3D('',#215981,#215982,#215983); +#215981 = CARTESIAN_POINT('',(166.54164932015,-62.31309932015,1.585)); +#215982 = DIRECTION('',(0.,0.,-1.)); +#215983 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#215984 = ORIENTED_EDGE('',*,*,#215985,.T.); +#215985 = EDGE_CURVE('',#215977,#215986,#215988,.T.); +#215986 = VERTEX_POINT('',#215987); +#215987 = CARTESIAN_POINT('',(169.84165,-62.2531,1.585)); +#215988 = LINE('',#215989,#215990); +#215989 = CARTESIAN_POINT('',(166.54165,-62.2531,1.585)); +#215990 = VECTOR('',#215991,1.); +#215991 = DIRECTION('',(1.,0.,0.)); +#215992 = ORIENTED_EDGE('',*,*,#215993,.T.); +#215993 = EDGE_CURVE('',#215986,#215994,#215996,.T.); +#215994 = VERTEX_POINT('',#215995); +#215995 = CARTESIAN_POINT('',(169.90165,-62.3131,1.585)); +#215996 = CIRCLE('',#215997,5.999932016256E-02); +#215997 = AXIS2_PLACEMENT_3D('',#215998,#215999,#216000); +#215998 = CARTESIAN_POINT('',(169.84165067984,-62.31309932015,1.585)); +#215999 = DIRECTION('',(0.,0.,-1.)); +#216000 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#216001 = ORIENTED_EDGE('',*,*,#216002,.T.); +#216002 = EDGE_CURVE('',#215994,#216003,#216005,.T.); +#216003 = VERTEX_POINT('',#216004); +#216004 = CARTESIAN_POINT('',(169.90165,-65.467545,1.585)); +#216005 = LINE('',#216006,#216007); +#216006 = CARTESIAN_POINT('',(169.90165,-62.3131,1.585)); +#216007 = VECTOR('',#216008,1.); +#216008 = DIRECTION('',(0.,-1.,0.)); +#216009 = ORIENTED_EDGE('',*,*,#216010,.T.); +#216010 = EDGE_CURVE('',#216003,#216011,#216013,.T.); +#216011 = VERTEX_POINT('',#216012); +#216012 = CARTESIAN_POINT('',(169.860214,-65.450382,1.585)); +#216013 = LINE('',#216014,#216015); +#216014 = CARTESIAN_POINT('',(169.90165,-65.467545,1.585)); +#216015 = VECTOR('',#216016,1.); +#216016 = DIRECTION('',(-0.923882316545,0.382676711045,0.)); +#216017 = ORIENTED_EDGE('',*,*,#216018,.T.); +#216018 = EDGE_CURVE('',#216011,#216019,#216021,.T.); +#216019 = VERTEX_POINT('',#216020); +#216020 = CARTESIAN_POINT('',(169.83095,-65.4475,1.585)); +#216021 = LINE('',#216022,#216023); +#216022 = CARTESIAN_POINT('',(169.860214,-65.450382,1.585)); +#216023 = VECTOR('',#216024,1.); +#216024 = DIRECTION('',(-0.995185563998,9.800863844454E-02,0.)); +#216025 = ORIENTED_EDGE('',*,*,#216026,.T.); +#216026 = EDGE_CURVE('',#216019,#216027,#216029,.T.); +#216027 = VERTEX_POINT('',#216028); +#216028 = CARTESIAN_POINT('',(169.801686,-65.450382,1.585)); +#216029 = LINE('',#216030,#216031); +#216030 = CARTESIAN_POINT('',(169.83095,-65.4475,1.585)); +#216031 = VECTOR('',#216032,1.); +#216032 = DIRECTION('',(-0.995185563998,-9.800863844454E-02,0.)); +#216033 = ORIENTED_EDGE('',*,*,#216034,.T.); +#216034 = EDGE_CURVE('',#216027,#216035,#216037,.T.); +#216035 = VERTEX_POINT('',#216036); +#216036 = CARTESIAN_POINT('',(169.78165,-65.458681,1.585)); +#216037 = LINE('',#216038,#216039); +#216038 = CARTESIAN_POINT('',(169.801686,-65.450382,1.585)); +#216039 = VECTOR('',#216040,1.); +#216040 = DIRECTION('',(-0.923882514837,-0.382676232314,0.)); +#216041 = ORIENTED_EDGE('',*,*,#216042,.T.); +#216042 = EDGE_CURVE('',#216035,#216043,#216045,.T.); +#216043 = VERTEX_POINT('',#216044); +#216044 = CARTESIAN_POINT('',(169.78165,-62.3731,1.585)); +#216045 = LINE('',#216046,#216047); +#216046 = CARTESIAN_POINT('',(169.78165,-65.458681,1.585)); +#216047 = VECTOR('',#216048,1.); +#216048 = DIRECTION('',(0.,1.,0.)); +#216049 = ORIENTED_EDGE('',*,*,#216050,.T.); +#216050 = EDGE_CURVE('',#216043,#216051,#216053,.T.); +#216051 = VERTEX_POINT('',#216052); +#216052 = CARTESIAN_POINT('',(166.60165,-62.3731,1.585)); +#216053 = LINE('',#216054,#216055); +#216054 = CARTESIAN_POINT('',(169.78165,-62.3731,1.585)); +#216055 = VECTOR('',#216056,1.); +#216056 = DIRECTION('',(-1.,0.,0.)); +#216057 = ORIENTED_EDGE('',*,*,#216058,.T.); +#216058 = EDGE_CURVE('',#216051,#216059,#216061,.T.); +#216059 = VERTEX_POINT('',#216060); +#216060 = CARTESIAN_POINT('',(166.60165,-63.698033,1.585)); +#216061 = LINE('',#216062,#216063); +#216062 = CARTESIAN_POINT('',(166.60165,-62.3731,1.585)); +#216063 = VECTOR('',#216064,1.); +#216064 = DIRECTION('',(0.,-1.,0.)); +#216065 = ORIENTED_EDGE('',*,*,#216066,.T.); +#216066 = EDGE_CURVE('',#216059,#216067,#216069,.T.); +#216067 = VERTEX_POINT('',#216068); +#216068 = CARTESIAN_POINT('',(166.600814,-63.69838,1.585)); +#216069 = LINE('',#216070,#216071); +#216070 = CARTESIAN_POINT('',(166.60165,-63.698033,1.585)); +#216071 = VECTOR('',#216072,1.); +#216072 = DIRECTION('',(-0.923599044209,-0.38335989036,0.)); +#216073 = ORIENTED_EDGE('',*,*,#216074,.T.); +#216074 = EDGE_CURVE('',#216067,#216075,#216077,.T.); +#216075 = VERTEX_POINT('',#216076); +#216076 = CARTESIAN_POINT('',(166.600814,-63.94782,1.585)); +#216077 = CIRCLE('',#216078,0.149999366947); +#216078 = AXIS2_PLACEMENT_3D('',#216079,#216080,#216081); +#216079 = CARTESIAN_POINT('',(166.68414905675,-63.8231,1.585)); +#216080 = DIRECTION('',(0.,0.,1.)); +#216081 = DIRECTION('',(-0.555569389738,0.831470175765,0.)); +#216082 = ORIENTED_EDGE('',*,*,#216083,.T.); +#216083 = EDGE_CURVE('',#216075,#216084,#216086,.T.); +#216084 = VERTEX_POINT('',#216085); +#216085 = CARTESIAN_POINT('',(166.60165,-63.948166,1.585)); +#216086 = LINE('',#216087,#216088); +#216087 = CARTESIAN_POINT('',(166.600814,-63.94782,1.585)); +#216088 = VECTOR('',#216089,1.); +#216089 = DIRECTION('',(0.923989900153,-0.382416872555,0.)); +#216090 = ORIENTED_EDGE('',*,*,#216091,.T.); +#216091 = EDGE_CURVE('',#216084,#216092,#216094,.T.); +#216092 = VERTEX_POINT('',#216093); +#216093 = CARTESIAN_POINT('',(166.60165,-67.8231,1.585)); +#216094 = LINE('',#216095,#216096); +#216095 = CARTESIAN_POINT('',(166.60165,-63.948166,1.585)); +#216096 = VECTOR('',#216097,1.); +#216097 = DIRECTION('',(0.,-1.,0.)); +#216098 = ORIENTED_EDGE('',*,*,#216099,.T.); +#216099 = EDGE_CURVE('',#216092,#216100,#216102,.T.); +#216100 = VERTEX_POINT('',#216101); +#216101 = CARTESIAN_POINT('',(166.48165,-67.8231,1.585)); +#216102 = CIRCLE('',#216103,6.000000000042E-02); +#216103 = AXIS2_PLACEMENT_3D('',#216104,#216105,#216106); +#216104 = CARTESIAN_POINT('',(166.54165,-67.82310022558,1.585)); +#216105 = DIRECTION('',(0.,0.,-1.)); +#216106 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#216107 = ORIENTED_EDGE('',*,*,#216108,.T.); +#216108 = EDGE_CURVE('',#216100,#215975,#216109,.T.); +#216109 = LINE('',#216110,#216111); +#216110 = CARTESIAN_POINT('',(166.48165,-67.8231,1.585)); +#216111 = VECTOR('',#216112,1.); +#216112 = DIRECTION('',(0.,1.,0.)); +#216113 = PLANE('',#216114); +#216114 = AXIS2_PLACEMENT_3D('',#216115,#216116,#216117); +#216115 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216116 = DIRECTION('',(0.,0.,1.)); +#216117 = DIRECTION('',(1.,0.,-0.)); +#216118 = SHELL_BASED_SURFACE_MODEL('',(#216119)); +#216119 = OPEN_SHELL('',(#216120)); +#216120 = ADVANCED_FACE('',(#216121),#216180,.T.); +#216121 = FACE_BOUND('',#216122,.F.); +#216122 = EDGE_LOOP('',(#216123,#216133,#216141,#216149,#216158,#216166, + #216174)); +#216123 = ORIENTED_EDGE('',*,*,#216124,.T.); +#216124 = EDGE_CURVE('',#216125,#216127,#216129,.T.); +#216125 = VERTEX_POINT('',#216126); +#216126 = CARTESIAN_POINT('',(169.83095,-65.7475,1.585)); +#216127 = VERTEX_POINT('',#216128); +#216128 = CARTESIAN_POINT('',(169.860214,-65.744618,1.585)); +#216129 = LINE('',#216130,#216131); +#216130 = CARTESIAN_POINT('',(169.83095,-65.7475,1.585)); +#216131 = VECTOR('',#216132,1.); +#216132 = DIRECTION('',(0.995185563998,9.800863844454E-02,0.)); +#216133 = ORIENTED_EDGE('',*,*,#216134,.T.); +#216134 = EDGE_CURVE('',#216127,#216135,#216137,.T.); +#216135 = VERTEX_POINT('',#216136); +#216136 = CARTESIAN_POINT('',(169.90165,-65.727454,1.585)); +#216137 = LINE('',#216138,#216139); +#216138 = CARTESIAN_POINT('',(169.860214,-65.744618,1.585)); +#216139 = VECTOR('',#216140,1.); +#216140 = DIRECTION('',(0.923874433489,0.382695742263,0.)); +#216141 = ORIENTED_EDGE('',*,*,#216142,.T.); +#216142 = EDGE_CURVE('',#216135,#216143,#216145,.T.); +#216143 = VERTEX_POINT('',#216144); +#216144 = CARTESIAN_POINT('',(169.90165,-67.8231,1.585)); +#216145 = LINE('',#216146,#216147); +#216146 = CARTESIAN_POINT('',(169.90165,-65.727454,1.585)); +#216147 = VECTOR('',#216148,1.); +#216148 = DIRECTION('',(0.,-1.,0.)); +#216149 = ORIENTED_EDGE('',*,*,#216150,.T.); +#216150 = EDGE_CURVE('',#216143,#216151,#216153,.T.); +#216151 = VERTEX_POINT('',#216152); +#216152 = CARTESIAN_POINT('',(169.78165,-67.8231,1.585)); +#216153 = CIRCLE('',#216154,6.000000000041E-02); +#216154 = AXIS2_PLACEMENT_3D('',#216155,#216156,#216157); +#216155 = CARTESIAN_POINT('',(169.84165,-67.82310022558,1.585)); +#216156 = DIRECTION('',(0.,0.,-1.)); +#216157 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#216158 = ORIENTED_EDGE('',*,*,#216159,.T.); +#216159 = EDGE_CURVE('',#216151,#216160,#216162,.T.); +#216160 = VERTEX_POINT('',#216161); +#216161 = CARTESIAN_POINT('',(169.78165,-65.736318,1.585)); +#216162 = LINE('',#216163,#216164); +#216163 = CARTESIAN_POINT('',(169.78165,-67.8231,1.585)); +#216164 = VECTOR('',#216165,1.); +#216165 = DIRECTION('',(0.,1.,0.)); +#216166 = ORIENTED_EDGE('',*,*,#216167,.T.); +#216167 = EDGE_CURVE('',#216160,#216168,#216170,.T.); +#216168 = VERTEX_POINT('',#216169); +#216169 = CARTESIAN_POINT('',(169.801686,-65.744618,1.585)); +#216170 = LINE('',#216171,#216172); +#216171 = CARTESIAN_POINT('',(169.78165,-65.736318,1.585)); +#216172 = VECTOR('',#216173,1.); +#216173 = DIRECTION('',(0.923866211796,-0.382715589834,0.)); +#216174 = ORIENTED_EDGE('',*,*,#216175,.T.); +#216175 = EDGE_CURVE('',#216168,#216125,#216176,.T.); +#216176 = LINE('',#216177,#216178); +#216177 = CARTESIAN_POINT('',(169.801686,-65.744618,1.585)); +#216178 = VECTOR('',#216179,1.); +#216179 = DIRECTION('',(0.995185563998,-9.800863844454E-02,0.)); +#216180 = PLANE('',#216181); +#216181 = AXIS2_PLACEMENT_3D('',#216182,#216183,#216184); +#216182 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216183 = DIRECTION('',(0.,0.,1.)); +#216184 = DIRECTION('',(1.,0.,-0.)); +#216185 = SHELL_BASED_SURFACE_MODEL('',(#216186)); +#216186 = OPEN_SHELL('',(#216187)); +#216187 = ADVANCED_FACE('',(#216188,#216382,#216416),#216450,.T.); +#216188 = FACE_BOUND('',#216189,.F.); +#216189 = EDGE_LOOP('',(#216190,#216201,#216209,#216217,#216225,#216234, + #216242,#216251,#216259,#216267,#216275,#216284,#216292,#216301, + #216309,#216317,#216326,#216334,#216343,#216351,#216359,#216368, + #216376)); +#216190 = ORIENTED_EDGE('',*,*,#216191,.T.); +#216191 = EDGE_CURVE('',#216192,#216194,#216196,.T.); +#216192 = VERTEX_POINT('',#216193); +#216193 = CARTESIAN_POINT('',(189.990717,-59.525639,1.585)); +#216194 = VERTEX_POINT('',#216195); +#216195 = CARTESIAN_POINT('',(190.10615,-59.5486,1.585)); +#216196 = CIRCLE('',#216197,6.000007318649E-02); +#216197 = AXIS2_PLACEMENT_3D('',#216198,#216199,#216200); +#216198 = CARTESIAN_POINT('',(190.04614992681,-59.54859982331,1.585)); +#216199 = DIRECTION('',(0.,0.,-1.)); +#216200 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#216201 = ORIENTED_EDGE('',*,*,#216202,.T.); +#216202 = EDGE_CURVE('',#216194,#216203,#216205,.T.); +#216203 = VERTEX_POINT('',#216204); +#216204 = CARTESIAN_POINT('',(190.10615,-60.1236,1.585)); +#216205 = LINE('',#216206,#216207); +#216206 = CARTESIAN_POINT('',(190.10615,-59.5486,1.585)); +#216207 = VECTOR('',#216208,1.); +#216208 = DIRECTION('',(0.,-1.,0.)); +#216209 = ORIENTED_EDGE('',*,*,#216210,.T.); +#216210 = EDGE_CURVE('',#216203,#216211,#216213,.T.); +#216211 = VERTEX_POINT('',#216212); +#216212 = CARTESIAN_POINT('',(190.64615,-60.1236,1.585)); +#216213 = LINE('',#216214,#216215); +#216214 = CARTESIAN_POINT('',(190.10615,-60.1236,1.585)); +#216215 = VECTOR('',#216216,1.); +#216216 = DIRECTION('',(1.,0.,0.)); +#216217 = ORIENTED_EDGE('',*,*,#216218,.T.); +#216218 = EDGE_CURVE('',#216211,#216219,#216221,.T.); +#216219 = VERTEX_POINT('',#216220); +#216220 = CARTESIAN_POINT('',(190.64615,-59.6756,1.585)); +#216221 = LINE('',#216222,#216223); +#216222 = CARTESIAN_POINT('',(190.64615,-60.1236,1.585)); +#216223 = VECTOR('',#216224,1.); +#216224 = DIRECTION('',(0.,1.,0.)); +#216225 = ORIENTED_EDGE('',*,*,#216226,.T.); +#216226 = EDGE_CURVE('',#216219,#216227,#216229,.T.); +#216227 = VERTEX_POINT('',#216228); +#216228 = CARTESIAN_POINT('',(190.70615,-59.6156,1.585)); +#216229 = CIRCLE('',#216230,5.999932016253E-02); +#216230 = AXIS2_PLACEMENT_3D('',#216231,#216232,#216233); +#216231 = CARTESIAN_POINT('',(190.70614932015,-59.67559932015,1.585)); +#216232 = DIRECTION('',(0.,0.,-1.)); +#216233 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#216234 = ORIENTED_EDGE('',*,*,#216235,.T.); +#216235 = EDGE_CURVE('',#216227,#216236,#216238,.T.); +#216236 = VERTEX_POINT('',#216237); +#216237 = CARTESIAN_POINT('',(192.61115,-59.6156,1.585)); +#216238 = LINE('',#216239,#216240); +#216239 = CARTESIAN_POINT('',(190.70615,-59.6156,1.585)); +#216240 = VECTOR('',#216241,1.); +#216241 = DIRECTION('',(1.,0.,0.)); +#216242 = ORIENTED_EDGE('',*,*,#216243,.T.); +#216243 = EDGE_CURVE('',#216236,#216244,#216246,.T.); +#216244 = VERTEX_POINT('',#216245); +#216245 = CARTESIAN_POINT('',(192.67115,-59.6756,1.585)); +#216246 = CIRCLE('',#216247,5.999932016261E-02); +#216247 = AXIS2_PLACEMENT_3D('',#216248,#216249,#216250); +#216248 = CARTESIAN_POINT('',(192.61115067984,-59.67559932015,1.585)); +#216249 = DIRECTION('',(0.,0.,-1.)); +#216250 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#216251 = ORIENTED_EDGE('',*,*,#216252,.T.); +#216252 = EDGE_CURVE('',#216244,#216253,#216255,.T.); +#216253 = VERTEX_POINT('',#216254); +#216254 = CARTESIAN_POINT('',(192.67115,-60.1236,1.585)); +#216255 = LINE('',#216256,#216257); +#216256 = CARTESIAN_POINT('',(192.67115,-59.6756,1.585)); +#216257 = VECTOR('',#216258,1.); +#216258 = DIRECTION('',(0.,-1.,0.)); +#216259 = ORIENTED_EDGE('',*,*,#216260,.T.); +#216260 = EDGE_CURVE('',#216253,#216261,#216263,.T.); +#216261 = VERTEX_POINT('',#216262); +#216262 = CARTESIAN_POINT('',(193.18615,-60.1236,1.585)); +#216263 = LINE('',#216264,#216265); +#216264 = CARTESIAN_POINT('',(192.67115,-60.1236,1.585)); +#216265 = VECTOR('',#216266,1.); +#216266 = DIRECTION('',(1.,0.,0.)); +#216267 = ORIENTED_EDGE('',*,*,#216268,.T.); +#216268 = EDGE_CURVE('',#216261,#216269,#216271,.T.); +#216269 = VERTEX_POINT('',#216270); +#216270 = CARTESIAN_POINT('',(193.18615,-59.5486,1.585)); +#216271 = LINE('',#216272,#216273); +#216272 = CARTESIAN_POINT('',(193.18615,-60.1236,1.585)); +#216273 = VECTOR('',#216274,1.); +#216274 = DIRECTION('',(0.,1.,0.)); +#216275 = ORIENTED_EDGE('',*,*,#216276,.T.); +#216276 = EDGE_CURVE('',#216269,#216277,#216279,.T.); +#216277 = VERTEX_POINT('',#216278); +#216278 = CARTESIAN_POINT('',(193.30615,-59.5486,1.585)); +#216279 = CIRCLE('',#216280,6.000000000042E-02); +#216280 = AXIS2_PLACEMENT_3D('',#216281,#216282,#216283); +#216281 = CARTESIAN_POINT('',(193.24615,-59.54859977441,1.585)); +#216282 = DIRECTION('',(0.,0.,-1.)); +#216283 = DIRECTION('',(-0.999999999993,-3.759794253684E-06,-0.)); +#216284 = ORIENTED_EDGE('',*,*,#216285,.T.); +#216285 = EDGE_CURVE('',#216277,#216286,#216288,.T.); +#216286 = VERTEX_POINT('',#216287); +#216287 = CARTESIAN_POINT('',(193.30615,-60.1836,1.585)); +#216288 = LINE('',#216289,#216290); +#216289 = CARTESIAN_POINT('',(193.30615,-59.5486,1.585)); +#216290 = VECTOR('',#216291,1.); +#216291 = DIRECTION('',(0.,-1.,0.)); +#216292 = ORIENTED_EDGE('',*,*,#216293,.T.); +#216293 = EDGE_CURVE('',#216286,#216294,#216296,.T.); +#216294 = VERTEX_POINT('',#216295); +#216295 = CARTESIAN_POINT('',(193.24615,-60.2436,1.585)); +#216296 = CIRCLE('',#216297,5.999932016262E-02); +#216297 = AXIS2_PLACEMENT_3D('',#216298,#216299,#216300); +#216298 = CARTESIAN_POINT('',(193.24615067984,-60.18360067984,1.585)); +#216299 = DIRECTION('',(0.,0.,-1.)); +#216300 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#216301 = ORIENTED_EDGE('',*,*,#216302,.T.); +#216302 = EDGE_CURVE('',#216294,#216303,#216305,.T.); +#216303 = VERTEX_POINT('',#216304); +#216304 = CARTESIAN_POINT('',(192.67115,-60.2436,1.585)); +#216305 = LINE('',#216306,#216307); +#216306 = CARTESIAN_POINT('',(193.24615,-60.2436,1.585)); +#216307 = VECTOR('',#216308,1.); +#216308 = DIRECTION('',(-1.,0.,0.)); +#216309 = ORIENTED_EDGE('',*,*,#216310,.T.); +#216310 = EDGE_CURVE('',#216303,#216311,#216313,.T.); +#216311 = VERTEX_POINT('',#216312); +#216312 = CARTESIAN_POINT('',(192.67115,-60.6916,1.585)); +#216313 = LINE('',#216314,#216315); +#216314 = CARTESIAN_POINT('',(192.67115,-60.2436,1.585)); +#216315 = VECTOR('',#216316,1.); +#216316 = DIRECTION('',(0.,-1.,0.)); +#216317 = ORIENTED_EDGE('',*,*,#216318,.T.); +#216318 = EDGE_CURVE('',#216311,#216319,#216321,.T.); +#216319 = VERTEX_POINT('',#216320); +#216320 = CARTESIAN_POINT('',(192.61115,-60.7516,1.585)); +#216321 = CIRCLE('',#216322,5.999932016262E-02); +#216322 = AXIS2_PLACEMENT_3D('',#216323,#216324,#216325); +#216323 = CARTESIAN_POINT('',(192.61115067984,-60.69160067984,1.585)); +#216324 = DIRECTION('',(0.,0.,-1.)); +#216325 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#216326 = ORIENTED_EDGE('',*,*,#216327,.T.); +#216327 = EDGE_CURVE('',#216319,#216328,#216330,.T.); +#216328 = VERTEX_POINT('',#216329); +#216329 = CARTESIAN_POINT('',(190.70615,-60.7516,1.585)); +#216330 = LINE('',#216331,#216332); +#216331 = CARTESIAN_POINT('',(192.61115,-60.7516,1.585)); +#216332 = VECTOR('',#216333,1.); +#216333 = DIRECTION('',(-1.,0.,0.)); +#216334 = ORIENTED_EDGE('',*,*,#216335,.T.); +#216335 = EDGE_CURVE('',#216328,#216336,#216338,.T.); +#216336 = VERTEX_POINT('',#216337); +#216337 = CARTESIAN_POINT('',(190.64615,-60.6916,1.585)); +#216338 = CIRCLE('',#216339,5.999932016259E-02); +#216339 = AXIS2_PLACEMENT_3D('',#216340,#216341,#216342); +#216340 = CARTESIAN_POINT('',(190.70614932015,-60.69160067984,1.585)); +#216341 = DIRECTION('',(0.,0.,-1.)); +#216342 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#216343 = ORIENTED_EDGE('',*,*,#216344,.T.); +#216344 = EDGE_CURVE('',#216336,#216345,#216347,.T.); +#216345 = VERTEX_POINT('',#216346); +#216346 = CARTESIAN_POINT('',(190.64615,-60.2436,1.585)); +#216347 = LINE('',#216348,#216349); +#216348 = CARTESIAN_POINT('',(190.64615,-60.6916,1.585)); +#216349 = VECTOR('',#216350,1.); +#216350 = DIRECTION('',(0.,1.,0.)); +#216351 = ORIENTED_EDGE('',*,*,#216352,.T.); +#216352 = EDGE_CURVE('',#216345,#216353,#216355,.T.); +#216353 = VERTEX_POINT('',#216354); +#216354 = CARTESIAN_POINT('',(190.04615,-60.2436,1.585)); +#216355 = LINE('',#216356,#216357); +#216356 = CARTESIAN_POINT('',(190.64615,-60.2436,1.585)); +#216357 = VECTOR('',#216358,1.); +#216358 = DIRECTION('',(-1.,0.,0.)); +#216359 = ORIENTED_EDGE('',*,*,#216360,.T.); +#216360 = EDGE_CURVE('',#216353,#216361,#216363,.T.); +#216361 = VERTEX_POINT('',#216362); +#216362 = CARTESIAN_POINT('',(189.98615,-60.1836,1.585)); +#216363 = CIRCLE('',#216364,5.999932016259E-02); +#216364 = AXIS2_PLACEMENT_3D('',#216365,#216366,#216367); +#216365 = CARTESIAN_POINT('',(190.04614932015,-60.18360067984,1.585)); +#216366 = DIRECTION('',(0.,0.,-1.)); +#216367 = DIRECTION('',(1.133081612142E-05,-0.999999999936,0.)); +#216368 = ORIENTED_EDGE('',*,*,#216369,.T.); +#216369 = EDGE_CURVE('',#216361,#216370,#216372,.T.); +#216370 = VERTEX_POINT('',#216371); +#216371 = CARTESIAN_POINT('',(189.98615,-59.5486,1.585)); +#216372 = LINE('',#216373,#216374); +#216373 = CARTESIAN_POINT('',(189.98615,-60.1836,1.585)); +#216374 = VECTOR('',#216375,1.); +#216375 = DIRECTION('',(0.,1.,0.)); +#216376 = ORIENTED_EDGE('',*,*,#216377,.T.); +#216377 = EDGE_CURVE('',#216370,#216192,#216378,.T.); +#216378 = LINE('',#216379,#216380); +#216379 = CARTESIAN_POINT('',(189.98615,-59.5486,1.585)); +#216380 = VECTOR('',#216381,1.); +#216381 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#216382 = FACE_BOUND('',#216383,.F.); +#216383 = EDGE_LOOP('',(#216384,#216394,#216402,#216410)); +#216384 = ORIENTED_EDGE('',*,*,#216385,.T.); +#216385 = EDGE_CURVE('',#216386,#216388,#216390,.T.); +#216386 = VERTEX_POINT('',#216387); +#216387 = CARTESIAN_POINT('',(191.561895,-60.6316,1.585)); +#216388 = VERTEX_POINT('',#216389); +#216389 = CARTESIAN_POINT('',(192.121895,-59.7356,1.585)); +#216390 = LINE('',#216391,#216392); +#216391 = CARTESIAN_POINT('',(191.561895,-60.6316,1.585)); +#216392 = VECTOR('',#216393,1.); +#216393 = DIRECTION('',(0.529998940003,0.847998304005,0.)); +#216394 = ORIENTED_EDGE('',*,*,#216395,.T.); +#216395 = EDGE_CURVE('',#216388,#216396,#216398,.T.); +#216396 = VERTEX_POINT('',#216397); +#216397 = CARTESIAN_POINT('',(190.76615,-59.7356,1.585)); +#216398 = LINE('',#216399,#216400); +#216399 = CARTESIAN_POINT('',(192.121895,-59.7356,1.585)); +#216400 = VECTOR('',#216401,1.); +#216401 = DIRECTION('',(-1.,0.,0.)); +#216402 = ORIENTED_EDGE('',*,*,#216403,.T.); +#216403 = EDGE_CURVE('',#216396,#216404,#216406,.T.); +#216404 = VERTEX_POINT('',#216405); +#216405 = CARTESIAN_POINT('',(190.76615,-60.6316,1.585)); +#216406 = LINE('',#216407,#216408); +#216407 = CARTESIAN_POINT('',(190.76615,-59.7356,1.585)); +#216408 = VECTOR('',#216409,1.); +#216409 = DIRECTION('',(0.,-1.,0.)); +#216410 = ORIENTED_EDGE('',*,*,#216411,.T.); +#216411 = EDGE_CURVE('',#216404,#216386,#216412,.T.); +#216412 = LINE('',#216413,#216414); +#216413 = CARTESIAN_POINT('',(190.76615,-60.6316,1.585)); +#216414 = VECTOR('',#216415,1.); +#216415 = DIRECTION('',(1.,0.,0.)); +#216416 = FACE_BOUND('',#216417,.F.); +#216417 = EDGE_LOOP('',(#216418,#216428,#216436,#216444)); +#216418 = ORIENTED_EDGE('',*,*,#216419,.T.); +#216419 = EDGE_CURVE('',#216420,#216422,#216424,.T.); +#216420 = VERTEX_POINT('',#216421); +#216421 = CARTESIAN_POINT('',(192.55115,-60.6316,1.585)); +#216422 = VERTEX_POINT('',#216423); +#216423 = CARTESIAN_POINT('',(192.55115,-59.7356,1.585)); +#216424 = LINE('',#216425,#216426); +#216425 = CARTESIAN_POINT('',(192.55115,-60.6316,1.585)); +#216426 = VECTOR('',#216427,1.); +#216427 = DIRECTION('',(0.,1.,0.)); +#216428 = ORIENTED_EDGE('',*,*,#216429,.T.); +#216429 = EDGE_CURVE('',#216422,#216430,#216432,.T.); +#216430 = VERTEX_POINT('',#216431); +#216431 = CARTESIAN_POINT('',(192.263405,-59.7356,1.585)); +#216432 = LINE('',#216433,#216434); +#216433 = CARTESIAN_POINT('',(192.55115,-59.7356,1.585)); +#216434 = VECTOR('',#216435,1.); +#216435 = DIRECTION('',(-1.,0.,0.)); +#216436 = ORIENTED_EDGE('',*,*,#216437,.T.); +#216437 = EDGE_CURVE('',#216430,#216438,#216440,.T.); +#216438 = VERTEX_POINT('',#216439); +#216439 = CARTESIAN_POINT('',(191.703405,-60.6316,1.585)); +#216440 = LINE('',#216441,#216442); +#216441 = CARTESIAN_POINT('',(192.263405,-59.7356,1.585)); +#216442 = VECTOR('',#216443,1.); +#216443 = DIRECTION('',(-0.529998940003,-0.847998304005,0.)); +#216444 = ORIENTED_EDGE('',*,*,#216445,.T.); +#216445 = EDGE_CURVE('',#216438,#216420,#216446,.T.); +#216446 = LINE('',#216447,#216448); +#216447 = CARTESIAN_POINT('',(191.703405,-60.6316,1.585)); +#216448 = VECTOR('',#216449,1.); +#216449 = DIRECTION('',(1.,0.,0.)); +#216450 = PLANE('',#216451); +#216451 = AXIS2_PLACEMENT_3D('',#216452,#216453,#216454); +#216452 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216453 = DIRECTION('',(0.,0.,1.)); +#216454 = DIRECTION('',(1.,0.,-0.)); +#216455 = SHELL_BASED_SURFACE_MODEL('',(#216456)); +#216456 = OPEN_SHELL('',(#216457)); +#216457 = ADVANCED_FACE('',(#216458,#216528),#216562,.T.); +#216458 = FACE_BOUND('',#216459,.F.); +#216459 = EDGE_LOOP('',(#216460,#216471,#216479,#216488,#216496,#216505, + #216513,#216522)); +#216460 = ORIENTED_EDGE('',*,*,#216461,.T.); +#216461 = EDGE_CURVE('',#216462,#216464,#216466,.T.); +#216462 = VERTEX_POINT('',#216463); +#216463 = CARTESIAN_POINT('',(187.82415,-54.5656,1.585)); +#216464 = VERTEX_POINT('',#216465); +#216465 = CARTESIAN_POINT('',(187.88415,-54.5056,1.585)); +#216466 = CIRCLE('',#216467,5.999932016262E-02); +#216467 = AXIS2_PLACEMENT_3D('',#216468,#216469,#216470); +#216468 = CARTESIAN_POINT('',(187.88414932015,-54.56559932015,1.585)); +#216469 = DIRECTION('',(0.,0.,-1.)); +#216470 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#216471 = ORIENTED_EDGE('',*,*,#216472,.T.); +#216472 = EDGE_CURVE('',#216464,#216473,#216475,.T.); +#216473 = VERTEX_POINT('',#216474); +#216474 = CARTESIAN_POINT('',(195.68415,-54.5056,1.585)); +#216475 = LINE('',#216476,#216477); +#216476 = CARTESIAN_POINT('',(187.88415,-54.5056,1.585)); +#216477 = VECTOR('',#216478,1.); +#216478 = DIRECTION('',(1.,0.,0.)); +#216479 = ORIENTED_EDGE('',*,*,#216480,.T.); +#216480 = EDGE_CURVE('',#216473,#216481,#216483,.T.); +#216481 = VERTEX_POINT('',#216482); +#216482 = CARTESIAN_POINT('',(195.74415,-54.5656,1.585)); +#216483 = CIRCLE('',#216484,5.999932016259E-02); +#216484 = AXIS2_PLACEMENT_3D('',#216485,#216486,#216487); +#216485 = CARTESIAN_POINT('',(195.68415067984,-54.56559932015,1.585)); +#216486 = DIRECTION('',(0.,0.,-1.)); +#216487 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#216488 = ORIENTED_EDGE('',*,*,#216489,.T.); +#216489 = EDGE_CURVE('',#216481,#216490,#216492,.T.); +#216490 = VERTEX_POINT('',#216491); +#216491 = CARTESIAN_POINT('',(195.74415,-67.2656,1.585)); +#216492 = LINE('',#216493,#216494); +#216493 = CARTESIAN_POINT('',(195.74415,-54.5656,1.585)); +#216494 = VECTOR('',#216495,1.); +#216495 = DIRECTION('',(0.,-1.,0.)); +#216496 = ORIENTED_EDGE('',*,*,#216497,.T.); +#216497 = EDGE_CURVE('',#216490,#216498,#216500,.T.); +#216498 = VERTEX_POINT('',#216499); +#216499 = CARTESIAN_POINT('',(195.68415,-67.3256,1.585)); +#216500 = CIRCLE('',#216501,5.999932016253E-02); +#216501 = AXIS2_PLACEMENT_3D('',#216502,#216503,#216504); +#216502 = CARTESIAN_POINT('',(195.68415067984,-67.26560067984,1.585)); +#216503 = DIRECTION('',(0.,0.,-1.)); +#216504 = DIRECTION('',(0.999999999936,1.133081683199E-05,0.)); +#216505 = ORIENTED_EDGE('',*,*,#216506,.T.); +#216506 = EDGE_CURVE('',#216498,#216507,#216509,.T.); +#216507 = VERTEX_POINT('',#216508); +#216508 = CARTESIAN_POINT('',(187.88415,-67.3256,1.585)); +#216509 = LINE('',#216510,#216511); +#216510 = CARTESIAN_POINT('',(195.68415,-67.3256,1.585)); +#216511 = VECTOR('',#216512,1.); +#216512 = DIRECTION('',(-1.,0.,0.)); +#216513 = ORIENTED_EDGE('',*,*,#216514,.T.); +#216514 = EDGE_CURVE('',#216507,#216515,#216517,.T.); +#216515 = VERTEX_POINT('',#216516); +#216516 = CARTESIAN_POINT('',(187.82415,-67.2656,1.585)); +#216517 = CIRCLE('',#216518,5.999932016257E-02); +#216518 = AXIS2_PLACEMENT_3D('',#216519,#216520,#216521); +#216519 = CARTESIAN_POINT('',(187.88414932015,-67.26560067984,1.585)); +#216520 = DIRECTION('',(0.,0.,-1.)); +#216521 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#216522 = ORIENTED_EDGE('',*,*,#216523,.T.); +#216523 = EDGE_CURVE('',#216515,#216462,#216524,.T.); +#216524 = LINE('',#216525,#216526); +#216525 = CARTESIAN_POINT('',(187.82415,-67.2656,1.585)); +#216526 = VECTOR('',#216527,1.); +#216527 = DIRECTION('',(0.,1.,0.)); +#216528 = FACE_BOUND('',#216529,.F.); +#216529 = EDGE_LOOP('',(#216530,#216540,#216548,#216556)); +#216530 = ORIENTED_EDGE('',*,*,#216531,.T.); +#216531 = EDGE_CURVE('',#216532,#216534,#216536,.T.); +#216532 = VERTEX_POINT('',#216533); +#216533 = CARTESIAN_POINT('',(195.62415,-67.2056,1.585)); +#216534 = VERTEX_POINT('',#216535); +#216535 = CARTESIAN_POINT('',(195.62415,-54.6256,1.585)); +#216536 = LINE('',#216537,#216538); +#216537 = CARTESIAN_POINT('',(195.62415,-67.2056,1.585)); +#216538 = VECTOR('',#216539,1.); +#216539 = DIRECTION('',(0.,1.,0.)); +#216540 = ORIENTED_EDGE('',*,*,#216541,.T.); +#216541 = EDGE_CURVE('',#216534,#216542,#216544,.T.); +#216542 = VERTEX_POINT('',#216543); +#216543 = CARTESIAN_POINT('',(187.94415,-54.6256,1.585)); +#216544 = LINE('',#216545,#216546); +#216545 = CARTESIAN_POINT('',(195.62415,-54.6256,1.585)); +#216546 = VECTOR('',#216547,1.); +#216547 = DIRECTION('',(-1.,0.,0.)); +#216548 = ORIENTED_EDGE('',*,*,#216549,.T.); +#216549 = EDGE_CURVE('',#216542,#216550,#216552,.T.); +#216550 = VERTEX_POINT('',#216551); +#216551 = CARTESIAN_POINT('',(187.94415,-67.2056,1.585)); +#216552 = LINE('',#216553,#216554); +#216553 = CARTESIAN_POINT('',(187.94415,-54.6256,1.585)); +#216554 = VECTOR('',#216555,1.); +#216555 = DIRECTION('',(0.,-1.,0.)); +#216556 = ORIENTED_EDGE('',*,*,#216557,.T.); +#216557 = EDGE_CURVE('',#216550,#216532,#216558,.T.); +#216558 = LINE('',#216559,#216560); +#216559 = CARTESIAN_POINT('',(187.94415,-67.2056,1.585)); +#216560 = VECTOR('',#216561,1.); +#216561 = DIRECTION('',(1.,0.,0.)); +#216562 = PLANE('',#216563); +#216563 = AXIS2_PLACEMENT_3D('',#216564,#216565,#216566); +#216564 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216565 = DIRECTION('',(0.,0.,1.)); +#216566 = DIRECTION('',(1.,0.,-0.)); +#216567 = SHELL_BASED_SURFACE_MODEL('',(#216568)); +#216568 = OPEN_SHELL('',(#216569)); +#216569 = ADVANCED_FACE('',(#216570,#216671),#216746,.T.); +#216570 = FACE_BOUND('',#216571,.F.); +#216571 = EDGE_LOOP('',(#216572,#216583,#216591,#216599,#216607,#216615, + #216623,#216632,#216640,#216649,#216657,#216665)); +#216572 = ORIENTED_EDGE('',*,*,#216573,.T.); +#216573 = EDGE_CURVE('',#216574,#216576,#216578,.T.); +#216574 = VERTEX_POINT('',#216575); +#216575 = CARTESIAN_POINT('',(170.24949,-66.402837,1.585)); +#216576 = VERTEX_POINT('',#216577); +#216577 = CARTESIAN_POINT('',(170.72045,-66.29597,1.585)); +#216578 = CIRCLE('',#216579,0.768531889865); +#216579 = AXIS2_PLACEMENT_3D('',#216580,#216581,#216582); +#216580 = CARTESIAN_POINT('',(170.64642434751,-67.06092847502,1.585)); +#216581 = DIRECTION('',(0.,0.,-1.)); +#216582 = DIRECTION('',(-0.516483899693,0.856296900238,0.)); +#216583 = ORIENTED_EDGE('',*,*,#216584,.T.); +#216584 = EDGE_CURVE('',#216576,#216585,#216587,.T.); +#216585 = VERTEX_POINT('',#216586); +#216586 = CARTESIAN_POINT('',(170.941914,-66.351256,1.585)); +#216587 = LINE('',#216588,#216589); +#216588 = CARTESIAN_POINT('',(170.72045,-66.29597,1.585)); +#216589 = VECTOR('',#216590,1.); +#216590 = DIRECTION('',(0.970224909195,-0.242205750505,0.)); +#216591 = ORIENTED_EDGE('',*,*,#216592,.T.); +#216592 = EDGE_CURVE('',#216585,#216593,#216595,.T.); +#216593 = VERTEX_POINT('',#216594); +#216594 = CARTESIAN_POINT('',(171.050894,-66.408205,1.585)); +#216595 = LINE('',#216596,#216597); +#216596 = CARTESIAN_POINT('',(170.941914,-66.351256,1.585)); +#216597 = VECTOR('',#216598,1.); +#216598 = DIRECTION('',(0.886284927965,-0.46314039606,0.)); +#216599 = ORIENTED_EDGE('',*,*,#216600,.T.); +#216600 = EDGE_CURVE('',#216593,#216601,#216603,.T.); +#216601 = VERTEX_POINT('',#216602); +#216602 = CARTESIAN_POINT('',(171.164007,-66.524052,1.585)); +#216603 = LINE('',#216604,#216605); +#216604 = CARTESIAN_POINT('',(171.050894,-66.408205,1.585)); +#216605 = VECTOR('',#216606,1.); +#216606 = DIRECTION('',(0.698613449619,-0.715499299798,0.)); +#216607 = ORIENTED_EDGE('',*,*,#216608,.T.); +#216608 = EDGE_CURVE('',#216601,#216609,#216611,.T.); +#216609 = VERTEX_POINT('',#216610); +#216610 = CARTESIAN_POINT('',(171.220739,-66.696645,1.585)); +#216611 = LINE('',#216612,#216613); +#216612 = CARTESIAN_POINT('',(171.164007,-66.524052,1.585)); +#216613 = VECTOR('',#216614,1.); +#216614 = DIRECTION('',(0.312266910039,-0.949994408876,0.)); +#216615 = ORIENTED_EDGE('',*,*,#216616,.T.); +#216616 = EDGE_CURVE('',#216609,#216617,#216619,.T.); +#216617 = VERTEX_POINT('',#216618); +#216618 = CARTESIAN_POINT('',(171.220028,-66.956779,1.585)); +#216619 = LINE('',#216620,#216621); +#216620 = CARTESIAN_POINT('',(171.220739,-66.696645,1.585)); +#216621 = VECTOR('',#216622,1.); +#216622 = DIRECTION('',(-2.733196522855E-03,-0.999996264811,0.)); +#216623 = ORIENTED_EDGE('',*,*,#216624,.T.); +#216624 = EDGE_CURVE('',#216617,#216625,#216627,.T.); +#216625 = VERTEX_POINT('',#216626); +#216626 = CARTESIAN_POINT('',(171.146469,-67.017147,1.585)); +#216627 = CIRCLE('',#216628,7.500074938985E-02); +#216628 = AXIS2_PLACEMENT_3D('',#216629,#216630,#216631); +#216629 = CARTESIAN_POINT('',(171.14646853389,-66.94214625061,1.585)); +#216630 = DIRECTION('',(0.,0.,-1.)); +#216631 = DIRECTION('',(0.980783081614,-0.195101375752,0.)); +#216632 = ORIENTED_EDGE('',*,*,#216633,.T.); +#216633 = EDGE_CURVE('',#216625,#216634,#216636,.T.); +#216634 = VERTEX_POINT('',#216635); +#216635 = CARTESIAN_POINT('',(170.131837,-67.015706,1.585)); +#216636 = LINE('',#216637,#216638); +#216637 = CARTESIAN_POINT('',(171.146469,-67.017147,1.585)); +#216638 = VECTOR('',#216639,1.); +#216639 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#216640 = ORIENTED_EDGE('',*,*,#216641,.T.); +#216641 = EDGE_CURVE('',#216634,#216642,#216644,.T.); +#216642 = VERTEX_POINT('',#216643); +#216643 = CARTESIAN_POINT('',(170.071469,-66.942147,1.585)); +#216644 = CIRCLE('',#216645,7.500074938982E-02); +#216645 = AXIS2_PLACEMENT_3D('',#216646,#216647,#216648); +#216646 = CARTESIAN_POINT('',(170.14646974938,-66.94214653389,1.585)); +#216647 = DIRECTION('',(0.,0.,-1.)); +#216648 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#216649 = ORIENTED_EDGE('',*,*,#216650,.T.); +#216650 = EDGE_CURVE('',#216642,#216651,#216653,.T.); +#216651 = VERTEX_POINT('',#216652); +#216652 = CARTESIAN_POINT('',(170.073668,-66.687588,1.585)); +#216653 = LINE('',#216654,#216655); +#216654 = CARTESIAN_POINT('',(170.071469,-66.942147,1.585)); +#216655 = VECTOR('',#216656,1.); +#216656 = DIRECTION('',(8.638146584621E-03,0.999962690516,0.)); +#216657 = ORIENTED_EDGE('',*,*,#216658,.T.); +#216658 = EDGE_CURVE('',#216651,#216659,#216661,.T.); +#216659 = VERTEX_POINT('',#216660); +#216660 = CARTESIAN_POINT('',(170.131728,-66.519527,1.585)); +#216661 = LINE('',#216662,#216663); +#216662 = CARTESIAN_POINT('',(170.073668,-66.687588,1.585)); +#216663 = VECTOR('',#216664,1.); +#216664 = DIRECTION('',(0.326533133634,0.945185755626,0.)); +#216665 = ORIENTED_EDGE('',*,*,#216666,.T.); +#216666 = EDGE_CURVE('',#216659,#216574,#216667,.T.); +#216667 = LINE('',#216668,#216669); +#216668 = CARTESIAN_POINT('',(170.131728,-66.519527,1.585)); +#216669 = VECTOR('',#216670,1.); +#216670 = DIRECTION('',(0.710332505875,0.70386627359,0.)); +#216671 = FACE_BOUND('',#216672,.F.); +#216672 = EDGE_LOOP('',(#216673,#216684,#216692,#216700,#216708,#216716, + #216724,#216732,#216740)); +#216673 = ORIENTED_EDGE('',*,*,#216674,.T.); +#216674 = EDGE_CURVE('',#216675,#216677,#216679,.T.); +#216675 = VERTEX_POINT('',#216676); +#216676 = CARTESIAN_POINT('',(170.882197,-66.489102,1.585)); +#216677 = VERTEX_POINT('',#216678); +#216678 = CARTESIAN_POINT('',(170.333753,-66.527596,1.585)); +#216679 = CIRCLE('',#216680,0.618603201895); +#216680 = AXIS2_PLACEMENT_3D('',#216681,#216682,#216683); +#216681 = CARTESIAN_POINT('',(170.646775275,-67.06115665892,1.585)); +#216682 = DIRECTION('',(0.,0.,1.)); +#216683 = DIRECTION('',(0.380569845546,0.924752179052,-0.)); +#216684 = ORIENTED_EDGE('',*,*,#216685,.T.); +#216685 = EDGE_CURVE('',#216677,#216686,#216688,.T.); +#216686 = VERTEX_POINT('',#216687); +#216687 = CARTESIAN_POINT('',(170.25964,-66.601708,1.585)); +#216688 = LINE('',#216689,#216690); +#216689 = CARTESIAN_POINT('',(170.333753,-66.527596,1.585)); +#216690 = VECTOR('',#216691,1.); +#216691 = DIRECTION('',(-0.707111551667,-0.707102010674,0.)); +#216692 = ORIENTED_EDGE('',*,*,#216693,.T.); +#216693 = EDGE_CURVE('',#216686,#216694,#216696,.T.); +#216694 = VERTEX_POINT('',#216695); +#216695 = CARTESIAN_POINT('',(170.221469,-66.716222,1.585)); +#216696 = LINE('',#216697,#216698); +#216697 = CARTESIAN_POINT('',(170.25964,-66.601708,1.585)); +#216698 = VECTOR('',#216699,1.); +#216699 = DIRECTION('',(-0.316225280684,-0.948684126491,0.)); +#216700 = ORIENTED_EDGE('',*,*,#216701,.T.); +#216701 = EDGE_CURVE('',#216694,#216702,#216704,.T.); +#216702 = VERTEX_POINT('',#216703); +#216703 = CARTESIAN_POINT('',(170.221469,-66.867147,1.585)); +#216704 = LINE('',#216705,#216706); +#216705 = CARTESIAN_POINT('',(170.221469,-66.716222,1.585)); +#216706 = VECTOR('',#216707,1.); +#216707 = DIRECTION('',(0.,-1.,0.)); +#216708 = ORIENTED_EDGE('',*,*,#216709,.T.); +#216709 = EDGE_CURVE('',#216702,#216710,#216712,.T.); +#216710 = VERTEX_POINT('',#216711); +#216711 = CARTESIAN_POINT('',(171.071469,-66.867147,1.585)); +#216712 = LINE('',#216713,#216714); +#216713 = CARTESIAN_POINT('',(170.221469,-66.867147,1.585)); +#216714 = VECTOR('',#216715,1.); +#216715 = DIRECTION('',(1.,0.,0.)); +#216716 = ORIENTED_EDGE('',*,*,#216717,.T.); +#216717 = EDGE_CURVE('',#216710,#216718,#216720,.T.); +#216718 = VERTEX_POINT('',#216719); +#216719 = CARTESIAN_POINT('',(171.071469,-66.716222,1.585)); +#216720 = LINE('',#216721,#216722); +#216721 = CARTESIAN_POINT('',(171.071469,-66.867147,1.585)); +#216722 = VECTOR('',#216723,1.); +#216723 = DIRECTION('',(0.,1.,0.)); +#216724 = ORIENTED_EDGE('',*,*,#216725,.T.); +#216725 = EDGE_CURVE('',#216718,#216726,#216728,.T.); +#216726 = VERTEX_POINT('',#216727); +#216727 = CARTESIAN_POINT('',(171.033298,-66.601709,1.585)); +#216728 = LINE('',#216729,#216730); +#216729 = CARTESIAN_POINT('',(171.071469,-66.716222,1.585)); +#216730 = VECTOR('',#216731,1.); +#216731 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#216732 = ORIENTED_EDGE('',*,*,#216733,.T.); +#216733 = EDGE_CURVE('',#216726,#216734,#216736,.T.); +#216734 = VERTEX_POINT('',#216735); +#216735 = CARTESIAN_POINT('',(170.959184,-66.527596,1.585)); +#216736 = LINE('',#216737,#216738); +#216737 = CARTESIAN_POINT('',(171.033298,-66.601709,1.585)); +#216738 = VECTOR('',#216739,1.); +#216739 = DIRECTION('',(-0.707111551602,0.707102010739,0.)); +#216740 = ORIENTED_EDGE('',*,*,#216741,.T.); +#216741 = EDGE_CURVE('',#216734,#216675,#216742,.T.); +#216742 = LINE('',#216743,#216744); +#216743 = CARTESIAN_POINT('',(170.959184,-66.527596,1.585)); +#216744 = VECTOR('',#216745,1.); +#216745 = DIRECTION('',(-0.894424867414,0.447218242641,0.)); +#216746 = PLANE('',#216747); +#216747 = AXIS2_PLACEMENT_3D('',#216748,#216749,#216750); +#216748 = CARTESIAN_POINT('',(0.,0.,1.585)); +#216749 = DIRECTION('',(0.,0.,1.)); +#216750 = DIRECTION('',(1.,0.,-0.)); +#216751 = SHELL_BASED_SURFACE_MODEL('',(#216752)); +#216752 = OPEN_SHELL('',(#216753)); +#216753 = ADVANCED_FACE('',(#216754),#217104,.T.); +#216754 = FACE_BOUND('',#216755,.F.); +#216755 = EDGE_LOOP('',(#216756,#216766,#216774,#216782,#216790,#216798, + #216807,#216815,#216823,#216832,#216840,#216848,#216856,#216864, + #216872,#216880,#216888,#216896,#216904,#216912,#216920,#216928, + #216936,#216944,#216952,#216960,#216968,#216977,#216985,#216993, + #217002,#217010,#217018,#217026,#217034,#217042,#217050,#217058, + #217066,#217074,#217082,#217090,#217098)); +#216756 = ORIENTED_EDGE('',*,*,#216757,.T.); +#216757 = EDGE_CURVE('',#216758,#216760,#216762,.T.); +#216758 = VERTEX_POINT('',#216759); +#216759 = CARTESIAN_POINT('',(109.186488,-64.724595,1.585)); +#216760 = VERTEX_POINT('',#216761); +#216761 = CARTESIAN_POINT('',(109.394347,-64.622253,1.585)); +#216762 = LINE('',#216763,#216764); +#216763 = CARTESIAN_POINT('',(109.186488,-64.724595,1.585)); +#216764 = VECTOR('',#216765,1.); +#216765 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#216766 = ORIENTED_EDGE('',*,*,#216767,.T.); +#216767 = EDGE_CURVE('',#216760,#216768,#216770,.T.); +#216768 = VERTEX_POINT('',#216769); +#216769 = CARTESIAN_POINT('',(109.427363,-64.617814,1.585)); +#216770 = LINE('',#216771,#216772); +#216771 = CARTESIAN_POINT('',(109.394347,-64.622253,1.585)); +#216772 = VECTOR('',#216773,1.); +#216773 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#216774 = ORIENTED_EDGE('',*,*,#216775,.T.); +#216775 = EDGE_CURVE('',#216768,#216776,#216778,.T.); +#216776 = VERTEX_POINT('',#216777); +#216777 = CARTESIAN_POINT('',(109.868277,-64.619029,1.585)); +#216778 = LINE('',#216779,#216780); +#216779 = CARTESIAN_POINT('',(109.427363,-64.617814,1.585)); +#216780 = VECTOR('',#216781,1.); +#216781 = DIRECTION('',(0.999996203247,-2.75562895927E-03,0.)); +#216782 = ORIENTED_EDGE('',*,*,#216783,.T.); +#216783 = EDGE_CURVE('',#216776,#216784,#216786,.T.); +#216784 = VERTEX_POINT('',#216785); +#216785 = CARTESIAN_POINT('',(109.895462,-64.624229,1.585)); +#216786 = LINE('',#216787,#216788); +#216787 = CARTESIAN_POINT('',(109.868277,-64.619029,1.585)); +#216788 = VECTOR('',#216789,1.); +#216789 = DIRECTION('',(0.982192801029,-0.187875761095,0.)); +#216790 = ORIENTED_EDGE('',*,*,#216791,.T.); +#216791 = EDGE_CURVE('',#216784,#216792,#216794,.T.); +#216792 = VERTEX_POINT('',#216793); +#216793 = CARTESIAN_POINT('',(110.17498,-64.719933,1.585)); +#216794 = LINE('',#216795,#216796); +#216795 = CARTESIAN_POINT('',(109.895462,-64.624229,1.585)); +#216796 = VECTOR('',#216797,1.); +#216797 = DIRECTION('',(0.946081626447,-0.323928319384,0.)); +#216798 = ORIENTED_EDGE('',*,*,#216799,.T.); +#216799 = EDGE_CURVE('',#216792,#216800,#216802,.T.); +#216800 = VERTEX_POINT('',#216801); +#216801 = CARTESIAN_POINT('',(110.097442,-64.952546,1.585)); +#216802 = CIRCLE('',#216803,0.12499954004); +#216803 = AXIS2_PLACEMENT_3D('',#216804,#216805,#216806); +#216804 = CARTESIAN_POINT('',(110.11307698876,-64.82852812976,1.585)); +#216805 = DIRECTION('',(0.,0.,-1.)); +#216806 = DIRECTION('',(0.495225912188,0.868764234933,0.)); +#216807 = ORIENTED_EDGE('',*,*,#216808,.T.); +#216808 = EDGE_CURVE('',#216800,#216809,#216811,.T.); +#216809 = VERTEX_POINT('',#216810); +#216810 = CARTESIAN_POINT('',(109.835651,-64.867814,1.585)); +#216811 = LINE('',#216812,#216813); +#216812 = CARTESIAN_POINT('',(110.097442,-64.952546,1.585)); +#216813 = VECTOR('',#216814,1.); +#216814 = DIRECTION('',(-0.951407352598,0.307935138337,0.)); +#216815 = ORIENTED_EDGE('',*,*,#216816,.T.); +#216816 = EDGE_CURVE('',#216809,#216817,#216819,.T.); +#216817 = VERTEX_POINT('',#216818); +#216818 = CARTESIAN_POINT('',(109.456872,-64.867814,1.585)); +#216819 = LINE('',#216820,#216821); +#216820 = CARTESIAN_POINT('',(109.835651,-64.867814,1.585)); +#216821 = VECTOR('',#216822,1.); +#216822 = DIRECTION('',(-1.,0.,0.)); +#216823 = ORIENTED_EDGE('',*,*,#216824,.T.); +#216824 = EDGE_CURVE('',#216817,#216825,#216827,.T.); +#216825 = VERTEX_POINT('',#216826); +#216826 = CARTESIAN_POINT('',(109.209506,-65.115179,1.585)); +#216827 = CIRCLE('',#216828,0.347626269899); +#216828 = AXIS2_PLACEMENT_3D('',#216829,#216830,#216831); +#216829 = CARTESIAN_POINT('',(109.54561406136,-65.20392242011,1.585)); +#216830 = DIRECTION('',(0.,0.,1.)); +#216831 = DIRECTION('',(-0.255280078187,0.966867147896,0.)); +#216832 = ORIENTED_EDGE('',*,*,#216833,.T.); +#216833 = EDGE_CURVE('',#216825,#216834,#216836,.T.); +#216834 = VERTEX_POINT('',#216835); +#216835 = CARTESIAN_POINT('',(109.209506,-65.227592,1.585)); +#216836 = LINE('',#216837,#216838); +#216837 = CARTESIAN_POINT('',(109.209506,-65.115179,1.585)); +#216838 = VECTOR('',#216839,1.); +#216839 = DIRECTION('',(0.,-1.,0.)); +#216840 = ORIENTED_EDGE('',*,*,#216841,.T.); +#216841 = EDGE_CURVE('',#216834,#216842,#216844,.T.); +#216842 = VERTEX_POINT('',#216843); +#216843 = CARTESIAN_POINT('',(109.272952,-65.354484,1.585)); +#216844 = LINE('',#216845,#216846); +#216845 = CARTESIAN_POINT('',(109.209506,-65.227592,1.585)); +#216846 = VECTOR('',#216847,1.); +#216847 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#216848 = ORIENTED_EDGE('',*,*,#216849,.T.); +#216849 = EDGE_CURVE('',#216842,#216850,#216852,.T.); +#216850 = VERTEX_POINT('',#216851); +#216851 = CARTESIAN_POINT('',(109.329978,-65.41151,1.585)); +#216852 = LINE('',#216853,#216854); +#216853 = CARTESIAN_POINT('',(109.272952,-65.354484,1.585)); +#216854 = VECTOR('',#216855,1.); +#216855 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#216856 = ORIENTED_EDGE('',*,*,#216857,.T.); +#216857 = EDGE_CURVE('',#216850,#216858,#216860,.T.); +#216858 = VERTEX_POINT('',#216859); +#216859 = CARTESIAN_POINT('',(109.47099,-65.482016,1.585)); +#216860 = LINE('',#216861,#216862); +#216861 = CARTESIAN_POINT('',(109.329978,-65.41151,1.585)); +#216862 = VECTOR('',#216863,1.); +#216863 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#216864 = ORIENTED_EDGE('',*,*,#216865,.T.); +#216865 = EDGE_CURVE('',#216858,#216866,#216868,.T.); +#216866 = VERTEX_POINT('',#216867); +#216867 = CARTESIAN_POINT('',(109.826121,-65.573867,1.585)); +#216868 = LINE('',#216869,#216870); +#216869 = CARTESIAN_POINT('',(109.47099,-65.482016,1.585)); +#216870 = VECTOR('',#216871,1.); +#216871 = DIRECTION('',(0.968142433695,-0.250400135942,0.)); +#216872 = ORIENTED_EDGE('',*,*,#216873,.T.); +#216873 = EDGE_CURVE('',#216866,#216874,#216876,.T.); +#216874 = VERTEX_POINT('',#216875); +#216875 = CARTESIAN_POINT('',(110.018288,-65.672635,1.585)); +#216876 = LINE('',#216877,#216878); +#216877 = CARTESIAN_POINT('',(109.826121,-65.573867,1.585)); +#216878 = VECTOR('',#216879,1.); +#216879 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#216880 = ORIENTED_EDGE('',*,*,#216881,.T.); +#216881 = EDGE_CURVE('',#216874,#216882,#216884,.T.); +#216882 = VERTEX_POINT('',#216883); +#216883 = CARTESIAN_POINT('',(110.131297,-65.787655,1.585)); +#216884 = LINE('',#216885,#216886); +#216885 = CARTESIAN_POINT('',(110.018288,-65.672635,1.585)); +#216886 = VECTOR('',#216887,1.); +#216887 = DIRECTION('',(0.700843514729,-0.713315055121,0.)); +#216888 = ORIENTED_EDGE('',*,*,#216889,.T.); +#216889 = EDGE_CURVE('',#216882,#216890,#216892,.T.); +#216890 = VERTEX_POINT('',#216891); +#216891 = CARTESIAN_POINT('',(110.233638,-65.995512,1.585)); +#216892 = LINE('',#216893,#216894); +#216893 = CARTESIAN_POINT('',(110.131297,-65.787655,1.585)); +#216894 = VECTOR('',#216895,1.); +#216895 = DIRECTION('',(0.44172363024,-0.897151177053,0.)); +#216896 = ORIENTED_EDGE('',*,*,#216897,.T.); +#216897 = EDGE_CURVE('',#216890,#216898,#216900,.T.); +#216898 = VERTEX_POINT('',#216899); +#216899 = CARTESIAN_POINT('',(110.238077,-66.028528,1.585)); +#216900 = LINE('',#216901,#216902); +#216901 = CARTESIAN_POINT('',(110.233638,-65.995512,1.585)); +#216902 = VECTOR('',#216903,1.); +#216903 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#216904 = ORIENTED_EDGE('',*,*,#216905,.T.); +#216905 = EDGE_CURVE('',#216898,#216906,#216908,.T.); +#216906 = VERTEX_POINT('',#216907); +#216907 = CARTESIAN_POINT('',(110.235675,-66.224343,1.585)); +#216908 = LINE('',#216909,#216910); +#216909 = CARTESIAN_POINT('',(110.238077,-66.028528,1.585)); +#216910 = VECTOR('',#216911,1.); +#216911 = DIRECTION('',(-1.226575749656E-02,-0.999924772767,0.)); +#216912 = ORIENTED_EDGE('',*,*,#216913,.T.); +#216913 = EDGE_CURVE('',#216906,#216914,#216916,.T.); +#216914 = VERTEX_POINT('',#216915); +#216915 = CARTESIAN_POINT('',(110.22488,-66.255859,1.585)); +#216916 = LINE('',#216917,#216918); +#216917 = CARTESIAN_POINT('',(110.235675,-66.224343,1.585)); +#216918 = VECTOR('',#216919,1.); +#216919 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#216920 = ORIENTED_EDGE('',*,*,#216921,.T.); +#216921 = EDGE_CURVE('',#216914,#216922,#216924,.T.); +#216922 = VERTEX_POINT('',#216923); +#216923 = CARTESIAN_POINT('',(110.126112,-66.448024,1.585)); +#216924 = LINE('',#216925,#216926); +#216925 = CARTESIAN_POINT('',(110.22488,-66.255859,1.585)); +#216926 = VECTOR('',#216927,1.); +#216927 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#216928 = ORIENTED_EDGE('',*,*,#216929,.T.); +#216929 = EDGE_CURVE('',#216922,#216930,#216932,.T.); +#216930 = VERTEX_POINT('',#216931); +#216931 = CARTESIAN_POINT('',(110.011096,-66.561033,1.585)); +#216932 = LINE('',#216933,#216934); +#216933 = CARTESIAN_POINT('',(110.126112,-66.448024,1.585)); +#216934 = VECTOR('',#216935,1.); +#216935 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#216936 = ORIENTED_EDGE('',*,*,#216937,.T.); +#216937 = EDGE_CURVE('',#216930,#216938,#216940,.T.); +#216938 = VERTEX_POINT('',#216939); +#216939 = CARTESIAN_POINT('',(109.803236,-66.663375,1.585)); +#216940 = LINE('',#216941,#216942); +#216941 = CARTESIAN_POINT('',(110.011096,-66.561033,1.585)); +#216942 = VECTOR('',#216943,1.); +#216943 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#216944 = ORIENTED_EDGE('',*,*,#216945,.T.); +#216945 = EDGE_CURVE('',#216938,#216946,#216948,.T.); +#216946 = VERTEX_POINT('',#216947); +#216947 = CARTESIAN_POINT('',(109.77022,-66.667814,1.585)); +#216948 = LINE('',#216949,#216950); +#216949 = CARTESIAN_POINT('',(109.803236,-66.663375,1.585)); +#216950 = VECTOR('',#216951,1.); +#216951 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#216952 = ORIENTED_EDGE('',*,*,#216953,.T.); +#216953 = EDGE_CURVE('',#216946,#216954,#216956,.T.); +#216954 = VERTEX_POINT('',#216955); +#216955 = CARTESIAN_POINT('',(109.317263,-66.665412,1.585)); +#216956 = LINE('',#216957,#216958); +#216957 = CARTESIAN_POINT('',(109.77022,-66.667814,1.585)); +#216958 = VECTOR('',#216959,1.); +#216959 = DIRECTION('',(-0.999985939755,5.302857064344E-03,0.)); +#216960 = ORIENTED_EDGE('',*,*,#216961,.T.); +#216961 = EDGE_CURVE('',#216954,#216962,#216964,.T.); +#216962 = VERTEX_POINT('',#216963); +#216963 = CARTESIAN_POINT('',(109.022603,-66.565695,1.585)); +#216964 = LINE('',#216965,#216966); +#216965 = CARTESIAN_POINT('',(109.317263,-66.665412,1.585)); +#216966 = VECTOR('',#216967,1.); +#216967 = DIRECTION('',(-0.947229710679,0.320555572727,0.)); +#216968 = ORIENTED_EDGE('',*,*,#216969,.T.); +#216969 = EDGE_CURVE('',#216962,#216970,#216972,.T.); +#216970 = VERTEX_POINT('',#216971); +#216971 = CARTESIAN_POINT('',(109.10014,-66.333082,1.585)); +#216972 = CIRCLE('',#216973,0.124999465062); +#216973 = AXIS2_PLACEMENT_3D('',#216974,#216975,#216976); +#216974 = CARTESIAN_POINT('',(109.08450593058,-66.45709991055,1.585)); +#216975 = DIRECTION('',(0.,0.,-1.)); +#216976 = DIRECTION('',(-0.495225563995,-0.868764433415,-0.)); +#216977 = ORIENTED_EDGE('',*,*,#216978,.T.); +#216978 = EDGE_CURVE('',#216970,#216979,#216981,.T.); +#216979 = VERTEX_POINT('',#216980); +#216980 = CARTESIAN_POINT('',(109.361935,-66.417814,1.585)); +#216981 = LINE('',#216982,#216983); +#216982 = CARTESIAN_POINT('',(109.10014,-66.333082,1.585)); +#216983 = VECTOR('',#216984,1.); +#216984 = DIRECTION('',(0.951408731017,-0.307930879492,0.)); +#216985 = ORIENTED_EDGE('',*,*,#216986,.T.); +#216986 = EDGE_CURVE('',#216979,#216987,#216989,.T.); +#216987 = VERTEX_POINT('',#216988); +#216988 = CARTESIAN_POINT('',(109.740711,-66.417814,1.585)); +#216989 = LINE('',#216990,#216991); +#216990 = CARTESIAN_POINT('',(109.361935,-66.417814,1.585)); +#216991 = VECTOR('',#216992,1.); +#216992 = DIRECTION('',(1.,0.,0.)); +#216993 = ORIENTED_EDGE('',*,*,#216994,.T.); +#216994 = EDGE_CURVE('',#216987,#216995,#216997,.T.); +#216995 = VERTEX_POINT('',#216996); +#216996 = CARTESIAN_POINT('',(109.988077,-66.170448,1.585)); +#216997 = CIRCLE('',#216998,0.347641001424); +#216998 = AXIS2_PLACEMENT_3D('',#216999,#217000,#217001); +#216999 = CARTESIAN_POINT('',(109.65195660111,-66.08169360111,1.585)); +#217000 = DIRECTION('',(0.,0.,1.)); +#217001 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#217002 = ORIENTED_EDGE('',*,*,#217003,.T.); +#217003 = EDGE_CURVE('',#216995,#217004,#217006,.T.); +#217004 = VERTEX_POINT('',#217005); +#217005 = CARTESIAN_POINT('',(109.988077,-66.058036,1.585)); +#217006 = LINE('',#217007,#217008); +#217007 = CARTESIAN_POINT('',(109.988077,-66.170448,1.585)); +#217008 = VECTOR('',#217009,1.); +#217009 = DIRECTION('',(0.,1.,0.)); +#217010 = ORIENTED_EDGE('',*,*,#217011,.T.); +#217011 = EDGE_CURVE('',#217004,#217012,#217014,.T.); +#217012 = VERTEX_POINT('',#217013); +#217013 = CARTESIAN_POINT('',(109.924631,-65.931145,1.585)); +#217014 = LINE('',#217015,#217016); +#217015 = CARTESIAN_POINT('',(109.988077,-66.058036,1.585)); +#217016 = VECTOR('',#217017,1.); +#217017 = DIRECTION('',(-0.447216415007,0.894425781241,0.)); +#217018 = ORIENTED_EDGE('',*,*,#217019,.T.); +#217019 = EDGE_CURVE('',#217012,#217020,#217022,.T.); +#217020 = VERTEX_POINT('',#217021); +#217021 = CARTESIAN_POINT('',(109.867602,-65.874116,1.585)); +#217022 = LINE('',#217023,#217024); +#217023 = CARTESIAN_POINT('',(109.924631,-65.931145,1.585)); +#217024 = VECTOR('',#217025,1.); +#217025 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217026 = ORIENTED_EDGE('',*,*,#217027,.T.); +#217027 = EDGE_CURVE('',#217020,#217028,#217030,.T.); +#217028 = VERTEX_POINT('',#217029); +#217029 = CARTESIAN_POINT('',(109.726591,-65.803611,1.585)); +#217030 = LINE('',#217031,#217032); +#217031 = CARTESIAN_POINT('',(109.867602,-65.874116,1.585)); +#217032 = VECTOR('',#217033,1.); +#217033 = DIRECTION('',(-0.89442845959,0.44721105831,0.)); +#217034 = ORIENTED_EDGE('',*,*,#217035,.T.); +#217035 = EDGE_CURVE('',#217028,#217036,#217038,.T.); +#217036 = VERTEX_POINT('',#217037); +#217037 = CARTESIAN_POINT('',(109.371461,-65.71176,1.585)); +#217038 = LINE('',#217039,#217040); +#217039 = CARTESIAN_POINT('',(109.726591,-65.803611,1.585)); +#217040 = VECTOR('',#217041,1.); +#217041 = DIRECTION('',(-0.968142262763,0.250400796827,0.)); +#217042 = ORIENTED_EDGE('',*,*,#217043,.T.); +#217043 = EDGE_CURVE('',#217036,#217044,#217046,.T.); +#217044 = VERTEX_POINT('',#217045); +#217045 = CARTESIAN_POINT('',(109.179295,-65.612991,1.585)); +#217046 = LINE('',#217047,#217048); +#217047 = CARTESIAN_POINT('',(109.371461,-65.71176,1.585)); +#217048 = VECTOR('',#217049,1.); +#217049 = DIRECTION('',(-0.889399267098,0.457131210579,0.)); +#217050 = ORIENTED_EDGE('',*,*,#217051,.T.); +#217051 = EDGE_CURVE('',#217044,#217052,#217054,.T.); +#217052 = VERTEX_POINT('',#217053); +#217053 = CARTESIAN_POINT('',(109.066287,-65.497974,1.585)); +#217054 = LINE('',#217055,#217056); +#217055 = CARTESIAN_POINT('',(109.179295,-65.612991,1.585)); +#217056 = VECTOR('',#217057,1.); +#217057 = DIRECTION('',(-0.700849660337,0.71330901691,0.)); +#217058 = ORIENTED_EDGE('',*,*,#217059,.T.); +#217059 = EDGE_CURVE('',#217052,#217060,#217062,.T.); +#217060 = VERTEX_POINT('',#217061); +#217061 = CARTESIAN_POINT('',(108.963945,-65.290116,1.585)); +#217062 = LINE('',#217063,#217064); +#217063 = CARTESIAN_POINT('',(109.066287,-65.497974,1.585)); +#217064 = VECTOR('',#217065,1.); +#217065 = DIRECTION('',(-0.441725393771,0.897150308754,0.)); +#217066 = ORIENTED_EDGE('',*,*,#217067,.T.); +#217067 = EDGE_CURVE('',#217060,#217068,#217070,.T.); +#217068 = VERTEX_POINT('',#217069); +#217069 = CARTESIAN_POINT('',(108.959506,-65.2571,1.585)); +#217070 = LINE('',#217071,#217072); +#217071 = CARTESIAN_POINT('',(108.963945,-65.290116,1.585)); +#217072 = VECTOR('',#217073,1.); +#217073 = DIRECTION('',(-0.133250982622,0.991082325355,0.)); +#217074 = ORIENTED_EDGE('',*,*,#217075,.T.); +#217075 = EDGE_CURVE('',#217068,#217076,#217078,.T.); +#217076 = VERTEX_POINT('',#217077); +#217077 = CARTESIAN_POINT('',(108.961908,-65.061285,1.585)); +#217078 = LINE('',#217079,#217080); +#217079 = CARTESIAN_POINT('',(108.959506,-65.2571,1.585)); +#217080 = VECTOR('',#217081,1.); +#217081 = DIRECTION('',(1.226575749649E-02,0.999924772767,0.)); +#217082 = ORIENTED_EDGE('',*,*,#217083,.T.); +#217083 = EDGE_CURVE('',#217076,#217084,#217086,.T.); +#217084 = VERTEX_POINT('',#217085); +#217085 = CARTESIAN_POINT('',(108.972702,-65.02977,1.585)); +#217086 = LINE('',#217087,#217088); +#217087 = CARTESIAN_POINT('',(108.961908,-65.061285,1.585)); +#217088 = VECTOR('',#217089,1.); +#217089 = DIRECTION('',(0.32402499528,0.946048520127,0.)); +#217090 = ORIENTED_EDGE('',*,*,#217091,.T.); +#217091 = EDGE_CURVE('',#217084,#217092,#217094,.T.); +#217092 = VERTEX_POINT('',#217093); +#217093 = CARTESIAN_POINT('',(109.07147,-64.837603,1.585)); +#217094 = LINE('',#217095,#217096); +#217095 = CARTESIAN_POINT('',(108.972702,-65.02977,1.585)); +#217096 = VECTOR('',#217097,1.); +#217097 = DIRECTION('',(0.45712566773,0.889402115976,0.)); +#217098 = ORIENTED_EDGE('',*,*,#217099,.T.); +#217099 = EDGE_CURVE('',#217092,#216758,#217100,.T.); +#217100 = LINE('',#217101,#217102); +#217101 = CARTESIAN_POINT('',(109.07147,-64.837603,1.585)); +#217102 = VECTOR('',#217103,1.); +#217103 = DIRECTION('',(0.713312063139,0.70084655994,0.)); +#217104 = PLANE('',#217105); +#217105 = AXIS2_PLACEMENT_3D('',#217106,#217107,#217108); +#217106 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217107 = DIRECTION('',(0.,0.,1.)); +#217108 = DIRECTION('',(1.,0.,-0.)); +#217109 = SHELL_BASED_SURFACE_MODEL('',(#217110)); +#217110 = OPEN_SHELL('',(#217111)); +#217111 = ADVANCED_FACE('',(#217112),#217376,.T.); +#217112 = FACE_BOUND('',#217113,.F.); +#217113 = EDGE_LOOP('',(#217114,#217125,#217133,#217142,#217150,#217158, + #217166,#217174,#217182,#217190,#217198,#217206,#217214,#217222, + #217230,#217238,#217246,#217254,#217262,#217270,#217278,#217286, + #217295,#217303,#217312,#217320,#217329,#217337,#217345,#217353, + #217362,#217370)); +#217114 = ORIENTED_EDGE('',*,*,#217115,.T.); +#217115 = EDGE_CURVE('',#217116,#217118,#217120,.T.); +#217116 = VERTEX_POINT('',#217117); +#217117 = CARTESIAN_POINT('',(114.117263,-64.865412,1.585)); +#217118 = VERTEX_POINT('',#217119); +#217119 = CARTESIAN_POINT('',(114.117263,-64.620216,1.585)); +#217120 = CIRCLE('',#217121,0.1249997864); +#217121 = AXIS2_PLACEMENT_3D('',#217122,#217123,#217124); +#217122 = CARTESIAN_POINT('',(114.141649,-64.742814,1.585)); +#217123 = DIRECTION('',(0.,0.,-1.)); +#217124 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#217125 = ORIENTED_EDGE('',*,*,#217126,.T.); +#217126 = EDGE_CURVE('',#217118,#217127,#217129,.T.); +#217127 = VERTEX_POINT('',#217128); +#217128 = CARTESIAN_POINT('',(115.268828,-64.619084,1.585)); +#217129 = LINE('',#217130,#217131); +#217130 = CARTESIAN_POINT('',(114.117263,-64.620216,1.585)); +#217131 = VECTOR('',#217132,1.); +#217132 = DIRECTION('',(0.999999516846,9.830096026433E-04,0.)); +#217133 = ORIENTED_EDGE('',*,*,#217134,.T.); +#217134 = EDGE_CURVE('',#217127,#217135,#217137,.T.); +#217135 = VERTEX_POINT('',#217136); +#217136 = CARTESIAN_POINT('',(115.378533,-64.718428,1.585)); +#217137 = CIRCLE('',#217138,0.123082651491); +#217138 = AXIS2_PLACEMENT_3D('',#217139,#217140,#217141); +#217139 = CARTESIAN_POINT('',(115.25766260791,-64.74165917333,1.585)); +#217140 = DIRECTION('',(0.,0.,-1.)); +#217141 = DIRECTION('',(9.071458856004E-02,0.995876931866,0.)); +#217142 = ORIENTED_EDGE('',*,*,#217143,.T.); +#217143 = EDGE_CURVE('',#217135,#217144,#217146,.T.); +#217144 = VERTEX_POINT('',#217145); +#217145 = CARTESIAN_POINT('',(115.378533,-64.7672,1.585)); +#217146 = LINE('',#217147,#217148); +#217147 = CARTESIAN_POINT('',(115.378533,-64.718428,1.585)); +#217148 = VECTOR('',#217149,1.); +#217149 = DIRECTION('',(0.,-1.,0.)); +#217150 = ORIENTED_EDGE('',*,*,#217151,.T.); +#217151 = EDGE_CURVE('',#217144,#217152,#217154,.T.); +#217152 = VERTEX_POINT('',#217153); +#217153 = CARTESIAN_POINT('',(115.357542,-64.814586,1.585)); +#217154 = LINE('',#217155,#217156); +#217155 = CARTESIAN_POINT('',(115.378533,-64.7672,1.585)); +#217156 = VECTOR('',#217157,1.); +#217157 = DIRECTION('',(-0.40501925629,-0.914308154855,0.)); +#217158 = ORIENTED_EDGE('',*,*,#217159,.T.); +#217159 = EDGE_CURVE('',#217152,#217160,#217162,.T.); +#217160 = VERTEX_POINT('',#217161); +#217161 = CARTESIAN_POINT('',(114.929951,-65.30519,1.585)); +#217162 = LINE('',#217163,#217164); +#217163 = CARTESIAN_POINT('',(115.357542,-64.814586,1.585)); +#217164 = VECTOR('',#217165,1.); +#217165 = DIRECTION('',(-0.657034748727,-0.75386029141,0.)); +#217166 = ORIENTED_EDGE('',*,*,#217167,.T.); +#217167 = EDGE_CURVE('',#217160,#217168,#217170,.T.); +#217168 = VERTEX_POINT('',#217169); +#217169 = CARTESIAN_POINT('',(114.968979,-65.316724,1.585)); +#217170 = LINE('',#217171,#217172); +#217171 = CARTESIAN_POINT('',(114.929951,-65.30519,1.585)); +#217172 = VECTOR('',#217173,1.); +#217173 = DIRECTION('',(0.958997674487,-0.283413938135,0.)); +#217174 = ORIENTED_EDGE('',*,*,#217175,.T.); +#217175 = EDGE_CURVE('',#217168,#217176,#217178,.T.); +#217176 = VERTEX_POINT('',#217177); +#217177 = CARTESIAN_POINT('',(115.161146,-65.415492,1.585)); +#217178 = LINE('',#217179,#217180); +#217179 = CARTESIAN_POINT('',(114.968979,-65.316724,1.585)); +#217180 = VECTOR('',#217181,1.); +#217181 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#217182 = ORIENTED_EDGE('',*,*,#217183,.T.); +#217183 = EDGE_CURVE('',#217176,#217184,#217186,.T.); +#217184 = VERTEX_POINT('',#217185); +#217185 = CARTESIAN_POINT('',(115.274155,-65.530512,1.585)); +#217186 = LINE('',#217187,#217188); +#217187 = CARTESIAN_POINT('',(115.161146,-65.415492,1.585)); +#217188 = VECTOR('',#217189,1.); +#217189 = DIRECTION('',(0.700843514729,-0.713315055121,0.)); +#217190 = ORIENTED_EDGE('',*,*,#217191,.T.); +#217191 = EDGE_CURVE('',#217184,#217192,#217194,.T.); +#217192 = VERTEX_POINT('',#217193); +#217193 = CARTESIAN_POINT('',(115.376496,-65.738369,1.585)); +#217194 = LINE('',#217195,#217196); +#217195 = CARTESIAN_POINT('',(115.274155,-65.530512,1.585)); +#217196 = VECTOR('',#217197,1.); +#217197 = DIRECTION('',(0.44172363024,-0.897151177053,0.)); +#217198 = ORIENTED_EDGE('',*,*,#217199,.T.); +#217199 = EDGE_CURVE('',#217192,#217200,#217202,.T.); +#217200 = VERTEX_POINT('',#217201); +#217201 = CARTESIAN_POINT('',(115.380935,-65.771385,1.585)); +#217202 = LINE('',#217203,#217204); +#217203 = CARTESIAN_POINT('',(115.376496,-65.738369,1.585)); +#217204 = VECTOR('',#217205,1.); +#217205 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#217206 = ORIENTED_EDGE('',*,*,#217207,.T.); +#217207 = EDGE_CURVE('',#217200,#217208,#217210,.T.); +#217208 = VERTEX_POINT('',#217209); +#217209 = CARTESIAN_POINT('',(115.378533,-66.224343,1.585)); +#217210 = LINE('',#217211,#217212); +#217211 = CARTESIAN_POINT('',(115.380935,-65.771385,1.585)); +#217212 = VECTOR('',#217213,1.); +#217213 = DIRECTION('',(-5.30284535747E-03,-0.999985939817,0.)); +#217214 = ORIENTED_EDGE('',*,*,#217215,.T.); +#217215 = EDGE_CURVE('',#217208,#217216,#217218,.T.); +#217216 = VERTEX_POINT('',#217217); +#217217 = CARTESIAN_POINT('',(115.367738,-66.255859,1.585)); +#217218 = LINE('',#217219,#217220); +#217219 = CARTESIAN_POINT('',(115.378533,-66.224343,1.585)); +#217220 = VECTOR('',#217221,1.); +#217221 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#217222 = ORIENTED_EDGE('',*,*,#217223,.T.); +#217223 = EDGE_CURVE('',#217216,#217224,#217226,.T.); +#217224 = VERTEX_POINT('',#217225); +#217225 = CARTESIAN_POINT('',(115.26897,-66.448024,1.585)); +#217226 = LINE('',#217227,#217228); +#217227 = CARTESIAN_POINT('',(115.367738,-66.255859,1.585)); +#217228 = VECTOR('',#217229,1.); +#217229 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#217230 = ORIENTED_EDGE('',*,*,#217231,.T.); +#217231 = EDGE_CURVE('',#217224,#217232,#217234,.T.); +#217232 = VERTEX_POINT('',#217233); +#217233 = CARTESIAN_POINT('',(115.153954,-66.561033,1.585)); +#217234 = LINE('',#217235,#217236); +#217235 = CARTESIAN_POINT('',(115.26897,-66.448024,1.585)); +#217236 = VECTOR('',#217237,1.); +#217237 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#217238 = ORIENTED_EDGE('',*,*,#217239,.T.); +#217239 = EDGE_CURVE('',#217232,#217240,#217242,.T.); +#217240 = VERTEX_POINT('',#217241); +#217241 = CARTESIAN_POINT('',(114.946094,-66.663375,1.585)); +#217242 = LINE('',#217243,#217244); +#217243 = CARTESIAN_POINT('',(115.153954,-66.561033,1.585)); +#217244 = VECTOR('',#217245,1.); +#217245 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#217246 = ORIENTED_EDGE('',*,*,#217247,.T.); +#217247 = EDGE_CURVE('',#217240,#217248,#217250,.T.); +#217248 = VERTEX_POINT('',#217249); +#217249 = CARTESIAN_POINT('',(114.913078,-66.667814,1.585)); +#217250 = LINE('',#217251,#217252); +#217251 = CARTESIAN_POINT('',(114.946094,-66.663375,1.585)); +#217252 = VECTOR('',#217253,1.); +#217253 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#217254 = ORIENTED_EDGE('',*,*,#217255,.T.); +#217255 = EDGE_CURVE('',#217248,#217256,#217258,.T.); +#217256 = VERTEX_POINT('',#217257); +#217257 = CARTESIAN_POINT('',(114.374406,-66.665412,1.585)); +#217258 = LINE('',#217259,#217260); +#217259 = CARTESIAN_POINT('',(114.913078,-66.667814,1.585)); +#217260 = VECTOR('',#217261,1.); +#217261 = DIRECTION('',(-0.999990058298,4.459069935018E-03,0.)); +#217262 = ORIENTED_EDGE('',*,*,#217263,.T.); +#217263 = EDGE_CURVE('',#217256,#217264,#217266,.T.); +#217264 = VERTEX_POINT('',#217265); +#217265 = CARTESIAN_POINT('',(114.34289,-66.654617,1.585)); +#217266 = LINE('',#217267,#217268); +#217267 = CARTESIAN_POINT('',(114.374406,-66.665412,1.585)); +#217268 = VECTOR('',#217269,1.); +#217269 = DIRECTION('',(-0.94604246983,0.324042659659,0.)); +#217270 = ORIENTED_EDGE('',*,*,#217271,.T.); +#217271 = EDGE_CURVE('',#217264,#217272,#217274,.T.); +#217272 = VERTEX_POINT('',#217273); +#217273 = CARTESIAN_POINT('',(114.150725,-66.555849,1.585)); +#217274 = LINE('',#217275,#217276); +#217275 = CARTESIAN_POINT('',(114.34289,-66.654617,1.585)); +#217276 = VECTOR('',#217277,1.); +#217277 = DIRECTION('',(-0.889400181666,0.457129431181,0.)); +#217278 = ORIENTED_EDGE('',*,*,#217279,.T.); +#217279 = EDGE_CURVE('',#217272,#217280,#217282,.T.); +#217280 = VERTEX_POINT('',#217281); +#217281 = CARTESIAN_POINT('',(114.037716,-66.440831,1.585)); +#217282 = LINE('',#217283,#217284); +#217283 = CARTESIAN_POINT('',(114.150725,-66.555849,1.585)); +#217284 = VECTOR('',#217285,1.); +#217285 = DIRECTION('',(-0.700849715454,0.713308962756,0.)); +#217286 = ORIENTED_EDGE('',*,*,#217287,.T.); +#217287 = EDGE_CURVE('',#217280,#217288,#217290,.T.); +#217288 = VERTEX_POINT('',#217289); +#217289 = CARTESIAN_POINT('',(114.211095,-66.267452,1.585)); +#217290 = CIRCLE('',#217291,0.124999261618); +#217291 = AXIS2_PLACEMENT_3D('',#217292,#217293,#217294); +#217292 = CARTESIAN_POINT('',(114.141649,-66.371385,1.585)); +#217293 = DIRECTION('',(0.,0.,-1.)); +#217294 = DIRECTION('',(-0.831468911535,-0.555571281791,-0.)); +#217295 = ORIENTED_EDGE('',*,*,#217296,.T.); +#217296 = EDGE_CURVE('',#217288,#217297,#217299,.T.); +#217297 = VERTEX_POINT('',#217298); +#217298 = CARTESIAN_POINT('',(114.301409,-66.354368,1.585)); +#217299 = LINE('',#217300,#217301); +#217300 = CARTESIAN_POINT('',(114.211095,-66.267452,1.585)); +#217301 = VECTOR('',#217302,1.); +#217302 = DIRECTION('',(0.720531596103,-0.69342210739,0.)); +#217303 = ORIENTED_EDGE('',*,*,#217304,.T.); +#217304 = EDGE_CURVE('',#217297,#217305,#217307,.T.); +#217305 = VERTEX_POINT('',#217306); +#217306 = CARTESIAN_POINT('',(115.01046,-66.354368,1.585)); +#217307 = CIRCLE('',#217308,0.654727516029); +#217308 = AXIS2_PLACEMENT_3D('',#217309,#217310,#217311); +#217309 = CARTESIAN_POINT('',(114.6559345,-65.803932,1.585)); +#217310 = DIRECTION('',(0.,0.,1.)); +#217311 = DIRECTION('',(-0.541485566622,-0.840710045819,0.)); +#217312 = ORIENTED_EDGE('',*,*,#217313,.T.); +#217313 = EDGE_CURVE('',#217305,#217314,#217316,.T.); +#217314 = VERTEX_POINT('',#217315); +#217315 = CARTESIAN_POINT('',(115.067489,-66.297339,1.585)); +#217316 = LINE('',#217317,#217318); +#217317 = CARTESIAN_POINT('',(115.01046,-66.354368,1.585)); +#217318 = VECTOR('',#217319,1.); +#217319 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217320 = ORIENTED_EDGE('',*,*,#217321,.T.); +#217321 = EDGE_CURVE('',#217314,#217322,#217324,.T.); +#217322 = VERTEX_POINT('',#217323); +#217323 = CARTESIAN_POINT('',(115.067489,-65.674002,1.585)); +#217324 = CIRCLE('',#217325,0.559554362254); +#217325 = AXIS2_PLACEMENT_3D('',#217326,#217327,#217328); +#217326 = CARTESIAN_POINT('',(114.60276991235,-65.9856705,1.585)); +#217327 = DIRECTION('',(0.,-0.,1.)); +#217328 = DIRECTION('',(0.830516423421,-0.556994138593,-0.)); +#217329 = ORIENTED_EDGE('',*,*,#217330,.T.); +#217330 = EDGE_CURVE('',#217322,#217331,#217333,.T.); +#217331 = VERTEX_POINT('',#217332); +#217332 = CARTESIAN_POINT('',(115.01046,-65.616973,1.585)); +#217333 = LINE('',#217334,#217335); +#217334 = CARTESIAN_POINT('',(115.067489,-65.674002,1.585)); +#217335 = VECTOR('',#217336,1.); +#217336 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217337 = ORIENTED_EDGE('',*,*,#217338,.T.); +#217338 = EDGE_CURVE('',#217331,#217339,#217341,.T.); +#217339 = VERTEX_POINT('',#217340); +#217340 = CARTESIAN_POINT('',(114.883569,-65.553528,1.585)); +#217341 = LINE('',#217342,#217343); +#217342 = CARTESIAN_POINT('',(115.01046,-65.616973,1.585)); +#217343 = VECTOR('',#217344,1.); +#217344 = DIRECTION('',(-0.894428600754,0.44721077598,0.)); +#217345 = ORIENTED_EDGE('',*,*,#217346,.T.); +#217346 = EDGE_CURVE('',#217339,#217347,#217349,.T.); +#217347 = VERTEX_POINT('',#217348); +#217348 = CARTESIAN_POINT('',(114.631549,-65.551126,1.585)); +#217349 = LINE('',#217350,#217351); +#217350 = CARTESIAN_POINT('',(114.883569,-65.553528,1.585)); +#217351 = VECTOR('',#217352,1.); +#217352 = DIRECTION('',(-0.999954583213,9.530556737088E-03,0.)); +#217353 = ORIENTED_EDGE('',*,*,#217354,.T.); +#217354 = EDGE_CURVE('',#217347,#217355,#217357,.T.); +#217355 = VERTEX_POINT('',#217356); +#217356 = CARTESIAN_POINT('',(114.554327,-65.356755,1.585)); +#217357 = CIRCLE('',#217358,0.124418290804); +#217358 = AXIS2_PLACEMENT_3D('',#217359,#217360,#217361); +#217359 = CARTESIAN_POINT('',(114.65558475569,-65.4290514591,1.585)); +#217360 = DIRECTION('',(0.,0.,-1.)); +#217361 = DIRECTION('',(-0.193185065761,-0.981162336398,-0.)); +#217362 = ORIENTED_EDGE('',*,*,#217363,.T.); +#217363 = EDGE_CURVE('',#217355,#217364,#217366,.T.); +#217364 = VERTEX_POINT('',#217365); +#217365 = CARTESIAN_POINT('',(114.980464,-64.867814,1.585)); +#217366 = LINE('',#217367,#217368); +#217367 = CARTESIAN_POINT('',(114.554327,-65.356755,1.585)); +#217368 = VECTOR('',#217369,1.); +#217369 = DIRECTION('',(0.657030722337,0.753863800633,0.)); +#217370 = ORIENTED_EDGE('',*,*,#217371,.T.); +#217371 = EDGE_CURVE('',#217364,#217116,#217372,.T.); +#217372 = LINE('',#217373,#217374); +#217373 = CARTESIAN_POINT('',(114.980464,-64.867814,1.585)); +#217374 = VECTOR('',#217375,1.); +#217375 = DIRECTION('',(-0.999996128408,2.782655141068E-03,0.)); +#217376 = PLANE('',#217377); +#217377 = AXIS2_PLACEMENT_3D('',#217378,#217379,#217380); +#217378 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217379 = DIRECTION('',(0.,0.,1.)); +#217380 = DIRECTION('',(1.,0.,-0.)); +#217381 = SHELL_BASED_SURFACE_MODEL('',(#217382)); +#217382 = OPEN_SHELL('',(#217383)); +#217383 = ADVANCED_FACE('',(#217384,#217580,#217647),#217699,.T.); +#217384 = FACE_BOUND('',#217385,.F.); +#217385 = EDGE_LOOP('',(#217386,#217397,#217405,#217413,#217421,#217429, + #217437,#217445,#217453,#217461,#217469,#217477,#217485,#217493, + #217501,#217509,#217517,#217525,#217533,#217541,#217549,#217557, + #217565,#217574)); +#217386 = ORIENTED_EDGE('',*,*,#217387,.T.); +#217387 = EDGE_CURVE('',#217388,#217390,#217392,.T.); +#217388 = VERTEX_POINT('',#217389); +#217389 = CARTESIAN_POINT('',(125.676196,-64.718428,1.585)); +#217390 = VERTEX_POINT('',#217391); +#217391 = CARTESIAN_POINT('',(125.774408,-64.620216,1.585)); +#217392 = CIRCLE('',#217393,0.124998078635); +#217393 = AXIS2_PLACEMENT_3D('',#217394,#217395,#217396); +#217394 = CARTESIAN_POINT('',(125.79879254765,-64.74281254765,1.585)); +#217395 = DIRECTION('',(0.,0.,-1.)); +#217396 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#217397 = ORIENTED_EDGE('',*,*,#217398,.T.); +#217398 = EDGE_CURVE('',#217390,#217399,#217401,.T.); +#217399 = VERTEX_POINT('',#217400); +#217400 = CARTESIAN_POINT('',(126.42318,-64.620216,1.585)); +#217401 = LINE('',#217402,#217403); +#217402 = CARTESIAN_POINT('',(125.774408,-64.620216,1.585)); +#217403 = VECTOR('',#217404,1.); +#217404 = DIRECTION('',(1.,0.,0.)); +#217405 = ORIENTED_EDGE('',*,*,#217406,.T.); +#217406 = EDGE_CURVE('',#217399,#217407,#217409,.T.); +#217407 = VERTEX_POINT('',#217408); +#217408 = CARTESIAN_POINT('',(126.454695,-64.63101,1.585)); +#217409 = LINE('',#217410,#217411); +#217410 = CARTESIAN_POINT('',(126.42318,-64.620216,1.585)); +#217411 = VECTOR('',#217412,1.); +#217412 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#217413 = ORIENTED_EDGE('',*,*,#217414,.T.); +#217414 = EDGE_CURVE('',#217407,#217415,#217417,.T.); +#217415 = VERTEX_POINT('',#217416); +#217416 = CARTESIAN_POINT('',(126.646862,-64.729778,1.585)); +#217417 = LINE('',#217418,#217419); +#217418 = CARTESIAN_POINT('',(126.454695,-64.63101,1.585)); +#217419 = VECTOR('',#217420,1.); +#217420 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#217421 = ORIENTED_EDGE('',*,*,#217422,.T.); +#217422 = EDGE_CURVE('',#217415,#217423,#217425,.T.); +#217423 = VERTEX_POINT('',#217424); +#217424 = CARTESIAN_POINT('',(126.75987,-64.844796,1.585)); +#217425 = LINE('',#217426,#217427); +#217426 = CARTESIAN_POINT('',(126.646862,-64.729778,1.585)); +#217427 = VECTOR('',#217428,1.); +#217428 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#217429 = ORIENTED_EDGE('',*,*,#217430,.T.); +#217430 = EDGE_CURVE('',#217423,#217431,#217433,.T.); +#217431 = VERTEX_POINT('',#217432); +#217432 = CARTESIAN_POINT('',(126.862212,-65.052655,1.585)); +#217433 = LINE('',#217434,#217435); +#217434 = CARTESIAN_POINT('',(126.75987,-64.844796,1.585)); +#217435 = VECTOR('',#217436,1.); +#217436 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#217437 = ORIENTED_EDGE('',*,*,#217438,.T.); +#217438 = EDGE_CURVE('',#217431,#217439,#217441,.T.); +#217439 = VERTEX_POINT('',#217440); +#217440 = CARTESIAN_POINT('',(126.866651,-65.085671,1.585)); +#217441 = LINE('',#217442,#217443); +#217442 = CARTESIAN_POINT('',(126.862212,-65.052655,1.585)); +#217443 = VECTOR('',#217444,1.); +#217444 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#217445 = ORIENTED_EDGE('',*,*,#217446,.T.); +#217446 = EDGE_CURVE('',#217439,#217447,#217449,.T.); +#217447 = VERTEX_POINT('',#217448); +#217448 = CARTESIAN_POINT('',(126.864249,-65.281486,1.585)); +#217449 = LINE('',#217450,#217451); +#217450 = CARTESIAN_POINT('',(126.866651,-65.085671,1.585)); +#217451 = VECTOR('',#217452,1.); +#217452 = DIRECTION('',(-1.226575749656E-02,-0.999924772767,0.)); +#217453 = ORIENTED_EDGE('',*,*,#217454,.T.); +#217454 = EDGE_CURVE('',#217447,#217455,#217457,.T.); +#217455 = VERTEX_POINT('',#217456); +#217456 = CARTESIAN_POINT('',(126.853454,-65.313002,1.585)); +#217457 = LINE('',#217458,#217459); +#217458 = CARTESIAN_POINT('',(126.864249,-65.281486,1.585)); +#217459 = VECTOR('',#217460,1.); +#217460 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#217461 = ORIENTED_EDGE('',*,*,#217462,.T.); +#217462 = EDGE_CURVE('',#217455,#217463,#217465,.T.); +#217463 = VERTEX_POINT('',#217464); +#217464 = CARTESIAN_POINT('',(126.754686,-65.505167,1.585)); +#217465 = LINE('',#217466,#217467); +#217466 = CARTESIAN_POINT('',(126.853454,-65.313002,1.585)); +#217467 = VECTOR('',#217468,1.); +#217468 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#217469 = ORIENTED_EDGE('',*,*,#217470,.T.); +#217470 = EDGE_CURVE('',#217463,#217471,#217473,.T.); +#217471 = VERTEX_POINT('',#217472); +#217472 = CARTESIAN_POINT('',(126.695465,-65.567085,1.585)); +#217473 = LINE('',#217474,#217475); +#217474 = CARTESIAN_POINT('',(126.754686,-65.505167,1.585)); +#217475 = VECTOR('',#217476,1.); +#217476 = DIRECTION('',(-0.691192700655,-0.722670499302,0.)); +#217477 = ORIENTED_EDGE('',*,*,#217478,.T.); +#217478 = EDGE_CURVE('',#217471,#217479,#217481,.T.); +#217479 = VERTEX_POINT('',#217480); +#217480 = CARTESIAN_POINT('',(126.725383,-65.581738,1.585)); +#217481 = LINE('',#217482,#217483); +#217482 = CARTESIAN_POINT('',(126.695465,-65.567085,1.585)); +#217483 = VECTOR('',#217484,1.); +#217484 = DIRECTION('',(0.898071177728,-0.439850156001,0.)); +#217485 = ORIENTED_EDGE('',*,*,#217486,.T.); +#217486 = EDGE_CURVE('',#217479,#217487,#217489,.T.); +#217487 = VERTEX_POINT('',#217488); +#217488 = CARTESIAN_POINT('',(126.845584,-65.701939,1.585)); +#217489 = LINE('',#217490,#217491); +#217490 = CARTESIAN_POINT('',(126.725383,-65.581738,1.585)); +#217491 = VECTOR('',#217492,1.); +#217492 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217493 = ORIENTED_EDGE('',*,*,#217494,.T.); +#217494 = EDGE_CURVE('',#217487,#217495,#217497,.T.); +#217495 = VERTEX_POINT('',#217496); +#217496 = CARTESIAN_POINT('',(126.947926,-65.909798,1.585)); +#217497 = LINE('',#217498,#217499); +#217498 = CARTESIAN_POINT('',(126.845584,-65.701939,1.585)); +#217499 = VECTOR('',#217500,1.); +#217500 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#217501 = ORIENTED_EDGE('',*,*,#217502,.T.); +#217502 = EDGE_CURVE('',#217495,#217503,#217505,.T.); +#217503 = VERTEX_POINT('',#217504); +#217504 = CARTESIAN_POINT('',(126.952365,-65.942814,1.585)); +#217505 = LINE('',#217506,#217507); +#217506 = CARTESIAN_POINT('',(126.947926,-65.909798,1.585)); +#217507 = VECTOR('',#217508,1.); +#217508 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#217509 = ORIENTED_EDGE('',*,*,#217510,.T.); +#217510 = EDGE_CURVE('',#217503,#217511,#217513,.T.); +#217511 = VERTEX_POINT('',#217512); +#217512 = CARTESIAN_POINT('',(126.949963,-66.224343,1.585)); +#217513 = LINE('',#217514,#217515); +#217514 = CARTESIAN_POINT('',(126.952365,-65.942814,1.585)); +#217515 = VECTOR('',#217516,1.); +#217516 = DIRECTION('',(-8.531670195069E-03,-0.99996360464,0.)); +#217517 = ORIENTED_EDGE('',*,*,#217518,.T.); +#217518 = EDGE_CURVE('',#217511,#217519,#217521,.T.); +#217519 = VERTEX_POINT('',#217520); +#217520 = CARTESIAN_POINT('',(126.939168,-66.255859,1.585)); +#217521 = LINE('',#217522,#217523); +#217522 = CARTESIAN_POINT('',(126.949963,-66.224343,1.585)); +#217523 = VECTOR('',#217524,1.); +#217524 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#217525 = ORIENTED_EDGE('',*,*,#217526,.T.); +#217526 = EDGE_CURVE('',#217519,#217527,#217529,.T.); +#217527 = VERTEX_POINT('',#217528); +#217528 = CARTESIAN_POINT('',(126.8404,-66.448024,1.585)); +#217529 = LINE('',#217530,#217531); +#217530 = CARTESIAN_POINT('',(126.939168,-66.255859,1.585)); +#217531 = VECTOR('',#217532,1.); +#217532 = DIRECTION('',(-0.457129431181,-0.889400181667,0.)); +#217533 = ORIENTED_EDGE('',*,*,#217534,.T.); +#217534 = EDGE_CURVE('',#217527,#217535,#217537,.T.); +#217535 = VERTEX_POINT('',#217536); +#217536 = CARTESIAN_POINT('',(126.725384,-66.561033,1.585)); +#217537 = LINE('',#217538,#217539); +#217538 = CARTESIAN_POINT('',(126.8404,-66.448024,1.585)); +#217539 = VECTOR('',#217540,1.); +#217540 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#217541 = ORIENTED_EDGE('',*,*,#217542,.T.); +#217542 = EDGE_CURVE('',#217535,#217543,#217545,.T.); +#217543 = VERTEX_POINT('',#217544); +#217544 = CARTESIAN_POINT('',(126.517524,-66.663375,1.585)); +#217545 = LINE('',#217546,#217547); +#217546 = CARTESIAN_POINT('',(126.725384,-66.561033,1.585)); +#217547 = VECTOR('',#217548,1.); +#217548 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#217549 = ORIENTED_EDGE('',*,*,#217550,.T.); +#217550 = EDGE_CURVE('',#217543,#217551,#217553,.T.); +#217551 = VERTEX_POINT('',#217552); +#217552 = CARTESIAN_POINT('',(126.484508,-66.667814,1.585)); +#217553 = LINE('',#217554,#217555); +#217554 = CARTESIAN_POINT('',(126.517524,-66.663375,1.585)); +#217555 = VECTOR('',#217556,1.); +#217556 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#217557 = ORIENTED_EDGE('',*,*,#217558,.T.); +#217558 = EDGE_CURVE('',#217551,#217559,#217561,.T.); +#217559 = VERTEX_POINT('',#217560); +#217560 = CARTESIAN_POINT('',(125.774408,-66.665412,1.585)); +#217561 = LINE('',#217562,#217563); +#217562 = CARTESIAN_POINT('',(126.484508,-66.667814,1.585)); +#217563 = VECTOR('',#217564,1.); +#217564 = DIRECTION('',(-0.999994278983,3.382602813857E-03,0.)); +#217565 = ORIENTED_EDGE('',*,*,#217566,.T.); +#217566 = EDGE_CURVE('',#217559,#217567,#217569,.T.); +#217567 = VERTEX_POINT('',#217568); +#217568 = CARTESIAN_POINT('',(125.676196,-66.5672,1.585)); +#217569 = CIRCLE('',#217570,0.124998078635); +#217570 = AXIS2_PLACEMENT_3D('',#217571,#217572,#217573); +#217571 = CARTESIAN_POINT('',(125.79879254765,-66.54281545234,1.585)); +#217572 = DIRECTION('',(0.,0.,-1.)); +#217573 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#217574 = ORIENTED_EDGE('',*,*,#217575,.T.); +#217575 = EDGE_CURVE('',#217567,#217388,#217576,.T.); +#217576 = LINE('',#217577,#217578); +#217577 = CARTESIAN_POINT('',(125.676196,-66.5672,1.585)); +#217578 = VECTOR('',#217579,1.); +#217579 = DIRECTION('',(0.,1.,0.)); +#217580 = FACE_BOUND('',#217581,.F.); +#217581 = EDGE_LOOP('',(#217582,#217592,#217600,#217608,#217616,#217625, + #217633,#217641)); +#217582 = ORIENTED_EDGE('',*,*,#217583,.T.); +#217583 = EDGE_CURVE('',#217584,#217586,#217588,.T.); +#217584 = VERTEX_POINT('',#217585); +#217585 = CARTESIAN_POINT('',(126.588415,-65.794925,1.585)); +#217586 = VERTEX_POINT('',#217587); +#217587 = CARTESIAN_POINT('',(126.378511,-65.724957,1.585)); +#217588 = LINE('',#217589,#217590); +#217589 = CARTESIAN_POINT('',(126.588415,-65.794925,1.585)); +#217590 = VECTOR('',#217591,1.); +#217591 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#217592 = ORIENTED_EDGE('',*,*,#217593,.T.); +#217593 = EDGE_CURVE('',#217586,#217594,#217596,.T.); +#217594 = VERTEX_POINT('',#217595); +#217595 = CARTESIAN_POINT('',(125.923794,-65.724957,1.585)); +#217596 = LINE('',#217597,#217598); +#217597 = CARTESIAN_POINT('',(126.378511,-65.724957,1.585)); +#217598 = VECTOR('',#217599,1.); +#217599 = DIRECTION('',(-1.,0.,0.)); +#217600 = ORIENTED_EDGE('',*,*,#217601,.T.); +#217601 = EDGE_CURVE('',#217594,#217602,#217604,.T.); +#217602 = VERTEX_POINT('',#217603); +#217603 = CARTESIAN_POINT('',(125.923794,-66.417814,1.585)); +#217604 = LINE('',#217605,#217606); +#217605 = CARTESIAN_POINT('',(125.923794,-65.724957,1.585)); +#217606 = VECTOR('',#217607,1.); +#217607 = DIRECTION('',(0.,-1.,0.)); +#217608 = ORIENTED_EDGE('',*,*,#217609,.T.); +#217609 = EDGE_CURVE('',#217602,#217610,#217612,.T.); +#217610 = VERTEX_POINT('',#217611); +#217611 = CARTESIAN_POINT('',(126.454999,-66.417814,1.585)); +#217612 = LINE('',#217613,#217614); +#217613 = CARTESIAN_POINT('',(125.923794,-66.417814,1.585)); +#217614 = VECTOR('',#217615,1.); +#217615 = DIRECTION('',(1.,0.,0.)); +#217616 = ORIENTED_EDGE('',*,*,#217617,.T.); +#217617 = EDGE_CURVE('',#217610,#217618,#217620,.T.); +#217618 = VERTEX_POINT('',#217619); +#217619 = CARTESIAN_POINT('',(126.702365,-66.170448,1.585)); +#217620 = CIRCLE('',#217621,0.347641001424); +#217621 = AXIS2_PLACEMENT_3D('',#217622,#217623,#217624); +#217622 = CARTESIAN_POINT('',(126.36624460111,-66.08169360111,1.585)); +#217623 = DIRECTION('',(0.,0.,1.)); +#217624 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#217625 = ORIENTED_EDGE('',*,*,#217626,.T.); +#217626 = EDGE_CURVE('',#217618,#217627,#217629,.T.); +#217627 = VERTEX_POINT('',#217628); +#217628 = CARTESIAN_POINT('',(126.702365,-65.972322,1.585)); +#217629 = LINE('',#217630,#217631); +#217630 = CARTESIAN_POINT('',(126.702365,-66.170448,1.585)); +#217631 = VECTOR('',#217632,1.); +#217632 = DIRECTION('',(0.,1.,0.)); +#217633 = ORIENTED_EDGE('',*,*,#217634,.T.); +#217634 = EDGE_CURVE('',#217627,#217635,#217637,.T.); +#217635 = VERTEX_POINT('',#217636); +#217636 = CARTESIAN_POINT('',(126.638917,-65.845427,1.585)); +#217637 = LINE('',#217638,#217639); +#217638 = CARTESIAN_POINT('',(126.702365,-65.972322,1.585)); +#217639 = VECTOR('',#217640,1.); +#217640 = DIRECTION('',(-0.447216414918,0.894425781285,0.)); +#217641 = ORIENTED_EDGE('',*,*,#217642,.T.); +#217642 = EDGE_CURVE('',#217635,#217584,#217643,.T.); +#217643 = LINE('',#217644,#217645); +#217644 = CARTESIAN_POINT('',(126.638917,-65.845427,1.585)); +#217645 = VECTOR('',#217646,1.); +#217646 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#217647 = FACE_BOUND('',#217648,.F.); +#217648 = EDGE_LOOP('',(#217649,#217660,#217668,#217676,#217684,#217693) + ); +#217649 = ORIENTED_EDGE('',*,*,#217650,.T.); +#217650 = EDGE_CURVE('',#217651,#217653,#217655,.T.); +#217651 = VERTEX_POINT('',#217652); +#217652 = CARTESIAN_POINT('',(126.616651,-65.115179,1.585)); +#217653 = VERTEX_POINT('',#217654); +#217654 = CARTESIAN_POINT('',(126.369285,-64.867814,1.585)); +#217655 = CIRCLE('',#217656,0.347631916063); +#217656 = AXIS2_PLACEMENT_3D('',#217657,#217658,#217659); +#217657 = CARTESIAN_POINT('',(126.28053831879,-65.20392703997,1.585)); +#217658 = DIRECTION('',(0.,0.,1.)); +#217659 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#217660 = ORIENTED_EDGE('',*,*,#217661,.T.); +#217661 = EDGE_CURVE('',#217653,#217662,#217664,.T.); +#217662 = VERTEX_POINT('',#217663); +#217663 = CARTESIAN_POINT('',(125.923794,-64.867814,1.585)); +#217664 = LINE('',#217665,#217666); +#217665 = CARTESIAN_POINT('',(126.369285,-64.867814,1.585)); +#217666 = VECTOR('',#217667,1.); +#217667 = DIRECTION('',(-1.,0.,0.)); +#217668 = ORIENTED_EDGE('',*,*,#217669,.T.); +#217669 = EDGE_CURVE('',#217662,#217670,#217672,.T.); +#217670 = VERTEX_POINT('',#217671); +#217671 = CARTESIAN_POINT('',(125.923794,-65.474957,1.585)); +#217672 = LINE('',#217673,#217674); +#217673 = CARTESIAN_POINT('',(125.923794,-64.867814,1.585)); +#217674 = VECTOR('',#217675,1.); +#217675 = DIRECTION('',(0.,-1.,0.)); +#217676 = ORIENTED_EDGE('',*,*,#217677,.T.); +#217677 = EDGE_CURVE('',#217670,#217678,#217680,.T.); +#217678 = VERTEX_POINT('',#217679); +#217679 = CARTESIAN_POINT('',(126.369286,-65.474957,1.585)); +#217680 = LINE('',#217681,#217682); +#217681 = CARTESIAN_POINT('',(125.923794,-65.474957,1.585)); +#217682 = VECTOR('',#217683,1.); +#217683 = DIRECTION('',(1.,0.,0.)); +#217684 = ORIENTED_EDGE('',*,*,#217685,.T.); +#217685 = EDGE_CURVE('',#217678,#217686,#217688,.T.); +#217686 = VERTEX_POINT('',#217687); +#217687 = CARTESIAN_POINT('',(126.616651,-65.227591,1.585)); +#217688 = CIRCLE('',#217689,0.347639125489); +#217689 = AXIS2_PLACEMENT_3D('',#217690,#217691,#217692); +#217690 = CARTESIAN_POINT('',(126.28053206109,-65.13883841988,1.585)); +#217691 = DIRECTION('',(0.,0.,1.)); +#217692 = DIRECTION('',(0.255304804327,-0.966860619163,0.)); +#217693 = ORIENTED_EDGE('',*,*,#217694,.T.); +#217694 = EDGE_CURVE('',#217686,#217651,#217695,.T.); +#217695 = LINE('',#217696,#217697); +#217696 = CARTESIAN_POINT('',(126.616651,-65.227591,1.585)); +#217697 = VECTOR('',#217698,1.); +#217698 = DIRECTION('',(0.,1.,0.)); +#217699 = PLANE('',#217700); +#217700 = AXIS2_PLACEMENT_3D('',#217701,#217702,#217703); +#217701 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217702 = DIRECTION('',(0.,0.,1.)); +#217703 = DIRECTION('',(1.,0.,-0.)); +#217704 = SHELL_BASED_SURFACE_MODEL('',(#217705)); +#217705 = OPEN_SHELL('',(#217706)); +#217706 = ADVANCED_FACE('',(#217707),#217825,.T.); +#217707 = FACE_BOUND('',#217708,.F.); +#217708 = EDGE_LOOP('',(#217709,#217720,#217728,#217736,#217745,#217753, + #217761,#217770,#217778,#217786,#217794,#217803,#217811,#217819)); +#217709 = ORIENTED_EDGE('',*,*,#217710,.T.); +#217710 = EDGE_CURVE('',#217711,#217713,#217715,.T.); +#217711 = VERTEX_POINT('',#217712); +#217712 = CARTESIAN_POINT('',(132.329348,-64.63888,1.585)); +#217713 = VERTEX_POINT('',#217714); +#217714 = CARTESIAN_POINT('',(132.521392,-64.718428,1.585)); +#217715 = CIRCLE('',#217716,0.124999692383); +#217716 = AXIS2_PLACEMENT_3D('',#217717,#217718,#217719); +#217717 = CARTESIAN_POINT('',(132.398794,-64.74281351807,1.585)); +#217718 = DIRECTION('',(0.,0.,-1.)); +#217719 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#217720 = ORIENTED_EDGE('',*,*,#217721,.T.); +#217721 = EDGE_CURVE('',#217713,#217722,#217724,.T.); +#217722 = VERTEX_POINT('',#217723); +#217723 = CARTESIAN_POINT('',(132.523794,-65.469609,1.585)); +#217724 = LINE('',#217725,#217726); +#217725 = CARTESIAN_POINT('',(132.521392,-64.718428,1.585)); +#217726 = VECTOR('',#217727,1.); +#217727 = DIRECTION('',(3.197615115492E-03,-0.999994887616,0.)); +#217728 = ORIENTED_EDGE('',*,*,#217729,.T.); +#217729 = EDGE_CURVE('',#217722,#217730,#217732,.T.); +#217730 = VERTEX_POINT('',#217731); +#217731 = CARTESIAN_POINT('',(133.357919,-64.638881,1.585)); +#217732 = LINE('',#217733,#217734); +#217733 = CARTESIAN_POINT('',(132.523794,-65.469609,1.585)); +#217734 = VECTOR('',#217735,1.); +#217735 = DIRECTION('',(0.708548101325,0.705662517149,0.)); +#217736 = ORIENTED_EDGE('',*,*,#217737,.T.); +#217737 = EDGE_CURVE('',#217730,#217738,#217740,.T.); +#217738 = VERTEX_POINT('',#217739); +#217739 = CARTESIAN_POINT('',(133.531298,-64.81226,1.585)); +#217740 = CIRCLE('',#217741,0.124999261618); +#217741 = AXIS2_PLACEMENT_3D('',#217742,#217743,#217744); +#217742 = CARTESIAN_POINT('',(133.427365,-64.742814,1.585)); +#217743 = DIRECTION('',(0.,0.,-1.)); +#217744 = DIRECTION('',(-0.555571281791,0.831468911535,0.)); +#217745 = ORIENTED_EDGE('',*,*,#217746,.T.); +#217746 = EDGE_CURVE('',#217738,#217747,#217749,.T.); +#217747 = VERTEX_POINT('',#217748); +#217748 = CARTESIAN_POINT('',(132.820983,-65.525971,1.585)); +#217749 = LINE('',#217750,#217751); +#217750 = CARTESIAN_POINT('',(133.531298,-64.81226,1.585)); +#217751 = VECTOR('',#217752,1.); +#217752 = DIRECTION('',(-0.705418475548,-0.708791065375,0.)); +#217753 = ORIENTED_EDGE('',*,*,#217754,.T.); +#217754 = EDGE_CURVE('',#217747,#217755,#217757,.T.); +#217755 = VERTEX_POINT('',#217756); +#217756 = CARTESIAN_POINT('',(133.540075,-66.488764,1.585)); +#217757 = LINE('',#217758,#217759); +#217758 = CARTESIAN_POINT('',(132.820983,-65.525971,1.585)); +#217759 = VECTOR('',#217760,1.); +#217760 = DIRECTION('',(0.598399589404,-0.801197810407,0.)); +#217761 = ORIENTED_EDGE('',*,*,#217762,.T.); +#217762 = EDGE_CURVE('',#217755,#217763,#217765,.T.); +#217763 = VERTEX_POINT('',#217764); +#217764 = CARTESIAN_POINT('',(133.343918,-66.635881,1.585)); +#217765 = CIRCLE('',#217766,0.124999676414); +#217766 = AXIS2_PLACEMENT_3D('',#217767,#217768,#217769); +#217767 = CARTESIAN_POINT('',(133.42736498436,-66.54281371302,1.585)); +#217768 = DIRECTION('',(0.,0.,-1.)); +#217769 = DIRECTION('',(0.901682459294,0.432398823544,0.)); +#217770 = ORIENTED_EDGE('',*,*,#217771,.T.); +#217771 = EDGE_CURVE('',#217763,#217772,#217774,.T.); +#217772 = VERTEX_POINT('',#217773); +#217773 = CARTESIAN_POINT('',(132.642412,-65.704542,1.585)); +#217774 = LINE('',#217775,#217776); +#217775 = CARTESIAN_POINT('',(133.343918,-66.635881,1.585)); +#217776 = VECTOR('',#217777,1.); +#217777 = DIRECTION('',(-0.601646375358,0.798762567362,0.)); +#217778 = ORIENTED_EDGE('',*,*,#217779,.T.); +#217779 = EDGE_CURVE('',#217772,#217780,#217782,.T.); +#217780 = VERTEX_POINT('',#217781); +#217781 = CARTESIAN_POINT('',(132.523794,-65.823161,1.585)); +#217782 = LINE('',#217783,#217784); +#217783 = CARTESIAN_POINT('',(132.642412,-65.704542,1.585)); +#217784 = VECTOR('',#217785,1.); +#217785 = DIRECTION('',(-0.707103800588,-0.707109761773,0.)); +#217786 = ORIENTED_EDGE('',*,*,#217787,.T.); +#217787 = EDGE_CURVE('',#217780,#217788,#217790,.T.); +#217788 = VERTEX_POINT('',#217789); +#217789 = CARTESIAN_POINT('',(132.521392,-66.5672,1.585)); +#217790 = LINE('',#217791,#217792); +#217791 = CARTESIAN_POINT('',(132.523794,-65.823161,1.585)); +#217792 = VECTOR('',#217793,1.); +#217793 = DIRECTION('',(-3.228308574136E-03,-0.999994788998,0.)); +#217794 = ORIENTED_EDGE('',*,*,#217795,.T.); +#217795 = EDGE_CURVE('',#217788,#217796,#217798,.T.); +#217796 = VERTEX_POINT('',#217797); +#217797 = CARTESIAN_POINT('',(132.276196,-66.5672,1.585)); +#217798 = CIRCLE('',#217799,0.1249997864); +#217799 = AXIS2_PLACEMENT_3D('',#217800,#217801,#217802); +#217800 = CARTESIAN_POINT('',(132.398794,-66.542814,1.585)); +#217801 = DIRECTION('',(-0.,0.,-1.)); +#217802 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#217803 = ORIENTED_EDGE('',*,*,#217804,.T.); +#217804 = EDGE_CURVE('',#217796,#217805,#217807,.T.); +#217805 = VERTEX_POINT('',#217806); +#217806 = CARTESIAN_POINT('',(132.276196,-64.718428,1.585)); +#217807 = LINE('',#217808,#217809); +#217808 = CARTESIAN_POINT('',(132.276196,-66.5672,1.585)); +#217809 = VECTOR('',#217810,1.); +#217810 = DIRECTION('',(0.,1.,0.)); +#217811 = ORIENTED_EDGE('',*,*,#217812,.T.); +#217812 = EDGE_CURVE('',#217805,#217813,#217815,.T.); +#217813 = VERTEX_POINT('',#217814); +#217814 = CARTESIAN_POINT('',(132.29486,-64.673368,1.585)); +#217815 = LINE('',#217816,#217817); +#217816 = CARTESIAN_POINT('',(132.276196,-64.718428,1.585)); +#217817 = VECTOR('',#217818,1.); +#217818 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#217819 = ORIENTED_EDGE('',*,*,#217820,.T.); +#217820 = EDGE_CURVE('',#217813,#217711,#217821,.T.); +#217821 = LINE('',#217822,#217823); +#217822 = CARTESIAN_POINT('',(132.29486,-64.673368,1.585)); +#217823 = VECTOR('',#217824,1.); +#217824 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#217825 = PLANE('',#217826); +#217826 = AXIS2_PLACEMENT_3D('',#217827,#217828,#217829); +#217827 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217828 = DIRECTION('',(0.,0.,1.)); +#217829 = DIRECTION('',(1.,0.,-0.)); +#217830 = SHELL_BASED_SURFACE_MODEL('',(#217831)); +#217831 = OPEN_SHELL('',(#217832)); +#217832 = ADVANCED_FACE('',(#217833,#217934),#217960,.T.); +#217833 = FACE_BOUND('',#217834,.F.); +#217834 = EDGE_LOOP('',(#217835,#217846,#217854,#217862,#217870,#217878, + #217886,#217895,#217903,#217911,#217919,#217928)); +#217835 = ORIENTED_EDGE('',*,*,#217836,.T.); +#217836 = EDGE_CURVE('',#217837,#217839,#217841,.T.); +#217837 = VERTEX_POINT('',#217838); +#217838 = CARTESIAN_POINT('',(129.290199,-64.68091,1.585)); +#217839 = VERTEX_POINT('',#217840); +#217840 = CARTESIAN_POINT('',(129.414428,-64.618795,1.585)); +#217841 = CIRCLE('',#217842,0.124999669127); +#217842 = AXIS2_PLACEMENT_3D('',#217843,#217844,#217845); +#217843 = CARTESIAN_POINT('',(129.3987941992,-64.7428131501,1.585)); +#217844 = DIRECTION('',(0.,0.,-1.)); +#217845 = DIRECTION('',(-0.868763893211,0.495226511663,0.)); +#217846 = ORIENTED_EDGE('',*,*,#217847,.T.); +#217847 = EDGE_CURVE('',#217839,#217848,#217850,.T.); +#217848 = VERTEX_POINT('',#217849); +#217849 = CARTESIAN_POINT('',(129.422903,-64.62162,1.585)); +#217850 = LINE('',#217851,#217852); +#217851 = CARTESIAN_POINT('',(129.414428,-64.618795,1.585)); +#217852 = VECTOR('',#217853,1.); +#217853 = DIRECTION('',(0.948683298051,-0.316227766015,0.)); +#217854 = ORIENTED_EDGE('',*,*,#217855,.T.); +#217855 = EDGE_CURVE('',#217848,#217856,#217858,.T.); +#217856 = VERTEX_POINT('',#217857); +#217857 = CARTESIAN_POINT('',(129.467447,-64.640071,1.585)); +#217858 = LINE('',#217859,#217860); +#217859 = CARTESIAN_POINT('',(129.422903,-64.62162,1.585)); +#217860 = VECTOR('',#217861,1.); +#217861 = DIRECTION('',(0.923877544693,-0.382688231348,0.)); +#217862 = ORIENTED_EDGE('',*,*,#217863,.T.); +#217863 = EDGE_CURVE('',#217856,#217864,#217866,.T.); +#217864 = VERTEX_POINT('',#217865); +#217865 = CARTESIAN_POINT('',(129.501538,-64.674165,1.585)); +#217866 = LINE('',#217867,#217868); +#217867 = CARTESIAN_POINT('',(129.467447,-64.640071,1.585)); +#217868 = VECTOR('',#217869,1.); +#217869 = DIRECTION('',(0.707075669256,-0.707137891748,0.)); +#217870 = ORIENTED_EDGE('',*,*,#217871,.T.); +#217871 = EDGE_CURVE('',#217864,#217872,#217874,.T.); +#217872 = VERTEX_POINT('',#217873); +#217873 = CARTESIAN_POINT('',(129.517379,-64.703286,1.585)); +#217874 = LINE('',#217875,#217876); +#217875 = CARTESIAN_POINT('',(129.501538,-64.674165,1.585)); +#217876 = VECTOR('',#217877,1.); +#217877 = DIRECTION('',(0.477847909994,-0.878442584871,0.)); +#217878 = ORIENTED_EDGE('',*,*,#217879,.T.); +#217879 = EDGE_CURVE('',#217872,#217880,#217882,.T.); +#217880 = VERTEX_POINT('',#217881); +#217881 = CARTESIAN_POINT('',(130.122812,-66.52718,1.585)); +#217882 = LINE('',#217883,#217884); +#217883 = CARTESIAN_POINT('',(129.517379,-64.703286,1.585)); +#217884 = VECTOR('',#217885,1.); +#217885 = DIRECTION('',(0.315041883433,-0.949077769038,0.)); +#217886 = ORIENTED_EDGE('',*,*,#217887,.T.); +#217887 = EDGE_CURVE('',#217880,#217888,#217890,.T.); +#217888 = VERTEX_POINT('',#217889); +#217889 = CARTESIAN_POINT('',(129.890199,-66.604718,1.585)); +#217890 = CIRCLE('',#217891,0.124999459985); +#217891 = AXIS2_PLACEMENT_3D('',#217892,#217893,#217894); +#217892 = CARTESIAN_POINT('',(129.99879425953,-66.54281537806,1.585)); +#217893 = DIRECTION('',(0.,0.,-1.)); +#217894 = DIRECTION('',(0.992146209888,0.12508356489,0.)); +#217895 = ORIENTED_EDGE('',*,*,#217896,.T.); +#217896 = EDGE_CURVE('',#217888,#217897,#217899,.T.); +#217897 = VERTEX_POINT('',#217898); +#217898 = CARTESIAN_POINT('',(129.737271,-66.153528,1.585)); +#217899 = LINE('',#217900,#217901); +#217900 = CARTESIAN_POINT('',(129.890199,-66.604718,1.585)); +#217901 = VECTOR('',#217902,1.); +#217902 = DIRECTION('',(-0.321005838701,0.947077215184,0.)); +#217903 = ORIENTED_EDGE('',*,*,#217904,.T.); +#217904 = EDGE_CURVE('',#217897,#217905,#217907,.T.); +#217905 = VERTEX_POINT('',#217906); +#217906 = CARTESIAN_POINT('',(129.060317,-66.153528,1.585)); +#217907 = LINE('',#217908,#217909); +#217908 = CARTESIAN_POINT('',(129.737271,-66.153528,1.585)); +#217909 = VECTOR('',#217910,1.); +#217910 = DIRECTION('',(-1.,0.,0.)); +#217911 = ORIENTED_EDGE('',*,*,#217912,.T.); +#217912 = EDGE_CURVE('',#217905,#217913,#217915,.T.); +#217913 = VERTEX_POINT('',#217914); +#217914 = CARTESIAN_POINT('',(128.907389,-66.604717,1.585)); +#217915 = LINE('',#217916,#217917); +#217916 = CARTESIAN_POINT('',(129.060317,-66.153528,1.585)); +#217917 = VECTOR('',#217918,1.); +#217918 = DIRECTION('',(-0.321006476855,-0.947076998885,0.)); +#217919 = ORIENTED_EDGE('',*,*,#217920,.T.); +#217920 = EDGE_CURVE('',#217913,#217921,#217923,.T.); +#217921 = VERTEX_POINT('',#217922); +#217922 = CARTESIAN_POINT('',(128.674776,-66.52718,1.585)); +#217923 = CIRCLE('',#217924,0.124999465062); +#217924 = AXIS2_PLACEMENT_3D('',#217925,#217926,#217927); +#217925 = CARTESIAN_POINT('',(128.79879391055,-66.54281406941,1.585)); +#217926 = DIRECTION('',(-0.,0.,-1.)); +#217927 = DIRECTION('',(0.868764433415,-0.495225563995,-0.)); +#217928 = ORIENTED_EDGE('',*,*,#217929,.T.); +#217929 = EDGE_CURVE('',#217921,#217837,#217930,.T.); +#217930 = LINE('',#217931,#217932); +#217931 = CARTESIAN_POINT('',(128.674776,-66.52718,1.585)); +#217932 = VECTOR('',#217933,1.); +#217933 = DIRECTION('',(0.316227611865,0.948683349434,0.)); +#217934 = FACE_BOUND('',#217935,.F.); +#217935 = EDGE_LOOP('',(#217936,#217946,#217954)); +#217936 = ORIENTED_EDGE('',*,*,#217937,.T.); +#217937 = EDGE_CURVE('',#217938,#217940,#217942,.T.); +#217938 = VERTEX_POINT('',#217939); +#217939 = CARTESIAN_POINT('',(129.143651,-65.903528,1.585)); +#217940 = VERTEX_POINT('',#217941); +#217941 = CARTESIAN_POINT('',(129.653937,-65.903528,1.585)); +#217942 = LINE('',#217943,#217944); +#217943 = CARTESIAN_POINT('',(129.143651,-65.903528,1.585)); +#217944 = VECTOR('',#217945,1.); +#217945 = DIRECTION('',(1.,0.,0.)); +#217946 = ORIENTED_EDGE('',*,*,#217947,.T.); +#217947 = EDGE_CURVE('',#217940,#217948,#217950,.T.); +#217948 = VERTEX_POINT('',#217949); +#217949 = CARTESIAN_POINT('',(129.398794,-65.138098,1.585)); +#217950 = LINE('',#217951,#217952); +#217951 = CARTESIAN_POINT('',(129.653937,-65.903528,1.585)); +#217952 = VECTOR('',#217953,1.); +#217953 = DIRECTION('',(-0.316227394193,0.948683421992,0.)); +#217954 = ORIENTED_EDGE('',*,*,#217955,.T.); +#217955 = EDGE_CURVE('',#217948,#217938,#217956,.T.); +#217956 = LINE('',#217957,#217958); +#217957 = CARTESIAN_POINT('',(129.398794,-65.138098,1.585)); +#217958 = VECTOR('',#217959,1.); +#217959 = DIRECTION('',(-0.316227394193,-0.948683421992,0.)); +#217960 = PLANE('',#217961); +#217961 = AXIS2_PLACEMENT_3D('',#217962,#217963,#217964); +#217962 = CARTESIAN_POINT('',(0.,0.,1.585)); +#217963 = DIRECTION('',(0.,0.,1.)); +#217964 = DIRECTION('',(1.,0.,-0.)); +#217965 = SHELL_BASED_SURFACE_MODEL('',(#217966)); +#217966 = OPEN_SHELL('',(#217967)); +#217967 = ADVANCED_FACE('',(#217968),#218215,.T.); +#217968 = FACE_BOUND('',#217969,.F.); +#217969 = EDGE_LOOP('',(#217970,#217980,#217988,#217996,#218004,#218012, + #218020,#218028,#218037,#218045,#218054,#218062,#218070,#218079, + #218087,#218096,#218104,#218113,#218121,#218129,#218137,#218145, + #218153,#218161,#218169,#218177,#218185,#218193,#218201,#218209)); +#217970 = ORIENTED_EDGE('',*,*,#217971,.T.); +#217971 = EDGE_CURVE('',#217972,#217974,#217976,.T.); +#217972 = VERTEX_POINT('',#217973); +#217973 = CARTESIAN_POINT('',(130.78649,-64.724595,1.585)); +#217974 = VERTEX_POINT('',#217975); +#217975 = CARTESIAN_POINT('',(130.816409,-64.709943,1.585)); +#217976 = LINE('',#217977,#217978); +#217977 = CARTESIAN_POINT('',(130.78649,-64.724595,1.585)); +#217978 = VECTOR('',#217979,1.); +#217979 = DIRECTION('',(0.898088841756,0.439814088352,0.)); +#217980 = ORIENTED_EDGE('',*,*,#217981,.T.); +#217981 = EDGE_CURVE('',#217974,#217982,#217984,.T.); +#217982 = VERTEX_POINT('',#217983); +#217983 = CARTESIAN_POINT('',(131.097445,-64.618796,1.585)); +#217984 = LINE('',#217985,#217986); +#217985 = CARTESIAN_POINT('',(130.816409,-64.709943,1.585)); +#217986 = VECTOR('',#217987,1.); +#217987 = DIRECTION('',(0.951222631034,0.308505277441,0.)); +#217988 = ORIENTED_EDGE('',*,*,#217989,.T.); +#217989 = EDGE_CURVE('',#217982,#217990,#217992,.T.); +#217990 = VERTEX_POINT('',#217991); +#217991 = CARTESIAN_POINT('',(131.296851,-64.619029,1.585)); +#217992 = LINE('',#217993,#217994); +#217993 = CARTESIAN_POINT('',(131.097445,-64.618796,1.585)); +#217994 = VECTOR('',#217995,1.); +#217995 = DIRECTION('',(0.999999317339,-1.168469559263E-03,0.)); +#217996 = ORIENTED_EDGE('',*,*,#217997,.T.); +#217997 = EDGE_CURVE('',#217990,#217998,#218000,.T.); +#217998 = VERTEX_POINT('',#217999); +#217999 = CARTESIAN_POINT('',(131.324036,-64.624229,1.585)); +#218000 = LINE('',#218001,#218002); +#218001 = CARTESIAN_POINT('',(131.296851,-64.619029,1.585)); +#218002 = VECTOR('',#218003,1.); +#218003 = DIRECTION('',(0.982192801029,-0.187875761094,0.)); +#218004 = ORIENTED_EDGE('',*,*,#218005,.T.); +#218005 = EDGE_CURVE('',#217998,#218006,#218008,.T.); +#218006 = VERTEX_POINT('',#218007); +#218007 = CARTESIAN_POINT('',(131.603554,-64.719933,1.585)); +#218008 = LINE('',#218009,#218010); +#218009 = CARTESIAN_POINT('',(131.324036,-64.624229,1.585)); +#218010 = VECTOR('',#218011,1.); +#218011 = DIRECTION('',(0.946081626447,-0.323928319384,0.)); +#218012 = ORIENTED_EDGE('',*,*,#218013,.T.); +#218013 = EDGE_CURVE('',#218006,#218014,#218016,.T.); +#218014 = VERTEX_POINT('',#218015); +#218015 = CARTESIAN_POINT('',(131.630039,-64.74014,1.585)); +#218016 = LINE('',#218017,#218018); +#218017 = CARTESIAN_POINT('',(131.603554,-64.719933,1.585)); +#218018 = VECTOR('',#218019,1.); +#218019 = DIRECTION('',(0.795027053382,-0.606573972728,0.)); +#218020 = ORIENTED_EDGE('',*,*,#218021,.T.); +#218021 = EDGE_CURVE('',#218014,#218022,#218024,.T.); +#218022 = VERTEX_POINT('',#218023); +#218023 = CARTESIAN_POINT('',(131.731298,-64.844796,1.585)); +#218024 = LINE('',#218025,#218026); +#218025 = CARTESIAN_POINT('',(131.630039,-64.74014,1.585)); +#218026 = VECTOR('',#218027,1.); +#218027 = DIRECTION('',(0.695346956718,-0.718674202809,0.)); +#218028 = ORIENTED_EDGE('',*,*,#218029,.T.); +#218029 = EDGE_CURVE('',#218022,#218030,#218032,.T.); +#218030 = VERTEX_POINT('',#218031); +#218031 = CARTESIAN_POINT('',(131.557919,-65.018175,1.585)); +#218032 = CIRCLE('',#218033,0.124999261618); +#218033 = AXIS2_PLACEMENT_3D('',#218034,#218035,#218036); +#218034 = CARTESIAN_POINT('',(131.627365,-64.914242,1.585)); +#218035 = DIRECTION('',(0.,0.,-1.)); +#218036 = DIRECTION('',(0.831468911535,0.555571281791,0.)); +#218037 = ORIENTED_EDGE('',*,*,#218038,.T.); +#218038 = EDGE_CURVE('',#218030,#218039,#218041,.T.); +#218039 = VERTEX_POINT('',#218040); +#218040 = CARTESIAN_POINT('',(131.474129,-64.937782,1.585)); +#218041 = LINE('',#218042,#218043); +#218042 = CARTESIAN_POINT('',(131.557919,-65.018175,1.585)); +#218043 = VECTOR('',#218044,1.); +#218044 = DIRECTION('',(-0.721582617399,0.69232833704,0.)); +#218045 = ORIENTED_EDGE('',*,*,#218046,.T.); +#218046 = EDGE_CURVE('',#218039,#218047,#218049,.T.); +#218047 = VERTEX_POINT('',#218048); +#218048 = CARTESIAN_POINT('',(130.92346,-64.937781,1.585)); +#218049 = CIRCLE('',#218050,0.550039736968); +#218050 = AXIS2_PLACEMENT_3D('',#218051,#218052,#218053); +#218051 = CARTESIAN_POINT('',(131.19879363529,-65.41394809411,1.585)); +#218052 = DIRECTION('',(0.,0.,1.)); +#218053 = DIRECTION('',(0.500573588052,0.865693989204,-0.)); +#218054 = ORIENTED_EDGE('',*,*,#218055,.T.); +#218055 = EDGE_CURVE('',#218047,#218056,#218058,.T.); +#218056 = VERTEX_POINT('',#218057); +#218057 = CARTESIAN_POINT('',(130.787239,-65.074001,1.585)); +#218058 = LINE('',#218059,#218060); +#218059 = CARTESIAN_POINT('',(130.92346,-64.937781,1.585)); +#218060 = VECTOR('',#218061,1.); +#218061 = DIRECTION('',(-0.707109376631,-0.707104185733,0.)); +#218062 = ORIENTED_EDGE('',*,*,#218063,.T.); +#218063 = EDGE_CURVE('',#218056,#218064,#218066,.T.); +#218064 = VERTEX_POINT('',#218065); +#218065 = CARTESIAN_POINT('',(130.716734,-65.215011,1.585)); +#218066 = LINE('',#218067,#218068); +#218067 = CARTESIAN_POINT('',(130.787239,-65.074001,1.585)); +#218068 = VECTOR('',#218069,1.); +#218069 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#218070 = ORIENTED_EDGE('',*,*,#218071,.T.); +#218071 = EDGE_CURVE('',#218064,#218072,#218074,.T.); +#218072 = VERTEX_POINT('',#218073); +#218073 = CARTESIAN_POINT('',(130.78724,-66.211627,1.585)); +#218074 = CIRCLE('',#218075,1.123544903385); +#218075 = AXIS2_PLACEMENT_3D('',#218076,#218077,#218078); +#218076 = CARTESIAN_POINT('',(131.75585740202,-65.6422997844,1.585)); +#218077 = DIRECTION('',(0.,0.,1.)); +#218078 = DIRECTION('',(-0.924861479854,0.380304145497,0.)); +#218079 = ORIENTED_EDGE('',*,*,#218080,.T.); +#218080 = EDGE_CURVE('',#218072,#218081,#218083,.T.); +#218081 = VERTEX_POINT('',#218082); +#218082 = CARTESIAN_POINT('',(130.92346,-66.347846,1.585)); +#218083 = LINE('',#218084,#218085); +#218084 = CARTESIAN_POINT('',(130.78724,-66.211627,1.585)); +#218085 = VECTOR('',#218086,1.); +#218086 = DIRECTION('',(0.70710937665,-0.707104185714,0.)); +#218087 = ORIENTED_EDGE('',*,*,#218088,.T.); +#218088 = EDGE_CURVE('',#218081,#218089,#218091,.T.); +#218089 = VERTEX_POINT('',#218090); +#218090 = CARTESIAN_POINT('',(131.474127,-66.347846,1.585)); +#218091 = CIRCLE('',#218092,0.550035579809); +#218092 = AXIS2_PLACEMENT_3D('',#218093,#218094,#218095); +#218093 = CARTESIAN_POINT('',(131.1987935,-65.87168362975,1.585)); +#218094 = DIRECTION('',(0.,0.,1.)); +#218095 = DIRECTION('',(-0.500573981225,-0.865693761859,0.)); +#218096 = ORIENTED_EDGE('',*,*,#218097,.T.); +#218097 = EDGE_CURVE('',#218089,#218098,#218100,.T.); +#218098 = VERTEX_POINT('',#218099); +#218099 = CARTESIAN_POINT('',(131.557918,-66.267452,1.585)); +#218100 = LINE('',#218101,#218102); +#218101 = CARTESIAN_POINT('',(131.474127,-66.347846,1.585)); +#218102 = VECTOR('',#218103,1.); +#218103 = DIRECTION('',(0.721582442981,0.692328518827,0.)); +#218104 = ORIENTED_EDGE('',*,*,#218105,.T.); +#218105 = EDGE_CURVE('',#218098,#218106,#218108,.T.); +#218106 = VERTEX_POINT('',#218107); +#218107 = CARTESIAN_POINT('',(131.731299,-66.44083,1.585)); +#218108 = CIRCLE('',#218109,0.124999581037); +#218109 = AXIS2_PLACEMENT_3D('',#218110,#218111,#218112); +#218110 = CARTESIAN_POINT('',(131.62736524829,-66.37138455006,1.585)); +#218111 = DIRECTION('',(0.,0.,-1.)); +#218112 = DIRECTION('',(-0.555579848504,0.831463187361,0.)); +#218113 = ORIENTED_EDGE('',*,*,#218114,.T.); +#218114 = EDGE_CURVE('',#218106,#218115,#218117,.T.); +#218115 = VERTEX_POINT('',#218116); +#218116 = CARTESIAN_POINT('',(131.611098,-66.561033,1.585)); +#218117 = LINE('',#218118,#218119); +#218118 = CARTESIAN_POINT('',(131.731299,-66.44083,1.585)); +#218119 = VECTOR('',#218120,1.); +#218120 = DIRECTION('',(-0.707100898508,-0.707112663816,0.)); +#218121 = ORIENTED_EDGE('',*,*,#218122,.T.); +#218122 = EDGE_CURVE('',#218115,#218123,#218125,.T.); +#218123 = VERTEX_POINT('',#218124); +#218124 = CARTESIAN_POINT('',(131.581179,-66.575686,1.585)); +#218125 = LINE('',#218126,#218127); +#218126 = CARTESIAN_POINT('',(131.611098,-66.561033,1.585)); +#218127 = VECTOR('',#218128,1.); +#218128 = DIRECTION('',(-0.898076984973,-0.439838298767,0.)); +#218129 = ORIENTED_EDGE('',*,*,#218130,.T.); +#218130 = EDGE_CURVE('',#218123,#218131,#218133,.T.); +#218131 = VERTEX_POINT('',#218132); +#218132 = CARTESIAN_POINT('',(131.300142,-66.666832,1.585)); +#218133 = LINE('',#218134,#218135); +#218134 = CARTESIAN_POINT('',(131.581179,-66.575686,1.585)); +#218135 = VECTOR('',#218136,1.); +#218136 = DIRECTION('',(-0.951223946428,-0.308501221622,0.)); +#218137 = ORIENTED_EDGE('',*,*,#218138,.T.); +#218138 = EDGE_CURVE('',#218131,#218139,#218141,.T.); +#218139 = VERTEX_POINT('',#218140); +#218140 = CARTESIAN_POINT('',(131.088694,-66.665412,1.585)); +#218141 = LINE('',#218142,#218143); +#218142 = CARTESIAN_POINT('',(131.300142,-66.666832,1.585)); +#218143 = VECTOR('',#218144,1.); +#218144 = DIRECTION('',(-0.999977451127,6.715447677899E-03,0.)); +#218145 = ORIENTED_EDGE('',*,*,#218146,.T.); +#218146 = EDGE_CURVE('',#218139,#218147,#218149,.T.); +#218147 = VERTEX_POINT('',#218148); +#218148 = CARTESIAN_POINT('',(130.794034,-66.565695,1.585)); +#218149 = LINE('',#218150,#218151); +#218150 = CARTESIAN_POINT('',(131.088694,-66.665412,1.585)); +#218151 = VECTOR('',#218152,1.); +#218152 = DIRECTION('',(-0.947229710679,0.320555572727,0.)); +#218153 = ORIENTED_EDGE('',*,*,#218154,.T.); +#218154 = EDGE_CURVE('',#218147,#218155,#218157,.T.); +#218155 = VERTEX_POINT('',#218156); +#218156 = CARTESIAN_POINT('',(130.767548,-66.545488,1.585)); +#218157 = LINE('',#218158,#218159); +#218158 = CARTESIAN_POINT('',(130.794034,-66.565695,1.585)); +#218159 = VECTOR('',#218160,1.); +#218160 = DIRECTION('',(-0.795038097574,0.606559497005,0.)); +#218161 = ORIENTED_EDGE('',*,*,#218162,.T.); +#218162 = EDGE_CURVE('',#218155,#218163,#218165,.T.); +#218163 = VERTEX_POINT('',#218164); +#218164 = CARTESIAN_POINT('',(130.580575,-66.355117,1.585)); +#218165 = LINE('',#218166,#218167); +#218166 = CARTESIAN_POINT('',(130.767548,-66.545488,1.585)); +#218167 = VECTOR('',#218168,1.); +#218168 = DIRECTION('',(-0.700710842198,0.713445383772,0.)); +#218169 = ORIENTED_EDGE('',*,*,#218170,.T.); +#218170 = EDGE_CURVE('',#218163,#218171,#218173,.T.); +#218171 = VERTEX_POINT('',#218172); +#218172 = CARTESIAN_POINT('',(130.477526,-66.144559,1.585)); +#218173 = LINE('',#218174,#218175); +#218174 = CARTESIAN_POINT('',(130.580575,-66.355117,1.585)); +#218175 = VECTOR('',#218176,1.); +#218176 = DIRECTION('',(-0.439587206682,0.898199915231,0.)); +#218177 = ORIENTED_EDGE('',*,*,#218178,.T.); +#218178 = EDGE_CURVE('',#218171,#218179,#218181,.T.); +#218179 = VERTEX_POINT('',#218180); +#218180 = CARTESIAN_POINT('',(130.388499,-65.775639,1.585)); +#218181 = LINE('',#218182,#218183); +#218182 = CARTESIAN_POINT('',(130.477526,-66.144559,1.585)); +#218183 = VECTOR('',#218184,1.); +#218184 = DIRECTION('',(-0.23458412347,0.97209582296,0.)); +#218185 = ORIENTED_EDGE('',*,*,#218186,.T.); +#218186 = EDGE_CURVE('',#218179,#218187,#218189,.T.); +#218187 = VERTEX_POINT('',#218188); +#218188 = CARTESIAN_POINT('',(130.391186,-65.488154,1.585)); +#218189 = LINE('',#218190,#218191); +#218190 = CARTESIAN_POINT('',(130.388499,-65.775639,1.585)); +#218191 = VECTOR('',#218192,1.); +#218192 = DIRECTION('',(9.346166379502E-03,0.999956323633,0.)); +#218193 = ORIENTED_EDGE('',*,*,#218194,.T.); +#218194 = EDGE_CURVE('',#218187,#218195,#218197,.T.); +#218195 = VERTEX_POINT('',#218196); +#218196 = CARTESIAN_POINT('',(130.486991,-65.115483,1.585)); +#218197 = LINE('',#218198,#218199); +#218198 = CARTESIAN_POINT('',(130.391186,-65.488154,1.585)); +#218199 = VECTOR('',#218200,1.); +#218200 = DIRECTION('',(0.248980864287,0.96850840431,0.)); +#218201 = ORIENTED_EDGE('',*,*,#218202,.T.); +#218202 = EDGE_CURVE('',#218195,#218203,#218205,.T.); +#218203 = VERTEX_POINT('',#218204); +#218204 = CARTESIAN_POINT('',(130.585759,-64.923318,1.585)); +#218205 = LINE('',#218206,#218207); +#218206 = CARTESIAN_POINT('',(130.486991,-65.115483,1.585)); +#218207 = VECTOR('',#218208,1.); +#218208 = DIRECTION('',(0.457129431181,0.889400181666,0.)); +#218209 = ORIENTED_EDGE('',*,*,#218210,.T.); +#218210 = EDGE_CURVE('',#218203,#217972,#218211,.T.); +#218211 = LINE('',#218212,#218213); +#218212 = CARTESIAN_POINT('',(130.585759,-64.923318,1.585)); +#218213 = VECTOR('',#218214,1.); +#218214 = DIRECTION('',(0.710652330358,0.703543364233,0.)); +#218215 = PLANE('',#218216); +#218216 = AXIS2_PLACEMENT_3D('',#218217,#218218,#218219); +#218217 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218218 = DIRECTION('',(0.,0.,1.)); +#218219 = DIRECTION('',(1.,0.,-0.)); +#218220 = SHELL_BASED_SURFACE_MODEL('',(#218221)); +#218221 = OPEN_SHELL('',(#218222)); +#218222 = ADVANCED_FACE('',(#218223),#218292,.T.); +#218223 = FACE_BOUND('',#218224,.F.); +#218224 = EDGE_LOOP('',(#218225,#218236,#218244,#218253,#218261,#218269, + #218278,#218286)); +#218225 = ORIENTED_EDGE('',*,*,#218226,.T.); +#218226 = EDGE_CURVE('',#218227,#218229,#218231,.T.); +#218227 = VERTEX_POINT('',#218228); +#218228 = CARTESIAN_POINT('',(110.602977,-64.865412,1.585)); +#218229 = VERTEX_POINT('',#218230); +#218230 = CARTESIAN_POINT('',(110.602977,-64.620216,1.585)); +#218231 = CIRCLE('',#218232,0.1249997864); +#218232 = AXIS2_PLACEMENT_3D('',#218233,#218234,#218235); +#218233 = CARTESIAN_POINT('',(110.627363,-64.742814,1.585)); +#218234 = DIRECTION('',(0.,0.,-1.)); +#218235 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#218236 = ORIENTED_EDGE('',*,*,#218237,.T.); +#218237 = EDGE_CURVE('',#218229,#218238,#218240,.T.); +#218238 = VERTEX_POINT('',#218239); +#218239 = CARTESIAN_POINT('',(111.680321,-64.620216,1.585)); +#218240 = LINE('',#218241,#218242); +#218241 = CARTESIAN_POINT('',(110.602977,-64.620216,1.585)); +#218242 = VECTOR('',#218243,1.); +#218243 = DIRECTION('',(1.,0.,0.)); +#218244 = ORIENTED_EDGE('',*,*,#218245,.T.); +#218245 = EDGE_CURVE('',#218238,#218246,#218248,.T.); +#218246 = VERTEX_POINT('',#218247); +#218247 = CARTESIAN_POINT('',(111.680321,-64.865412,1.585)); +#218248 = CIRCLE('',#218249,0.1249997864); +#218249 = AXIS2_PLACEMENT_3D('',#218250,#218251,#218252); +#218250 = CARTESIAN_POINT('',(111.655935,-64.742814,1.585)); +#218251 = DIRECTION('',(0.,0.,-1.)); +#218252 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218253 = ORIENTED_EDGE('',*,*,#218254,.T.); +#218254 = EDGE_CURVE('',#218246,#218255,#218257,.T.); +#218255 = VERTEX_POINT('',#218256); +#218256 = CARTESIAN_POINT('',(111.266649,-64.867814,1.585)); +#218257 = LINE('',#218258,#218259); +#218258 = CARTESIAN_POINT('',(111.680321,-64.865412,1.585)); +#218259 = VECTOR('',#218260,1.); +#218260 = DIRECTION('',(-0.999983142515,-5.806434828344E-03,0.)); +#218261 = ORIENTED_EDGE('',*,*,#218262,.T.); +#218262 = EDGE_CURVE('',#218255,#218263,#218265,.T.); +#218263 = VERTEX_POINT('',#218264); +#218264 = CARTESIAN_POINT('',(111.264247,-66.5672,1.585)); +#218265 = LINE('',#218266,#218267); +#218266 = CARTESIAN_POINT('',(111.266649,-64.867814,1.585)); +#218267 = VECTOR('',#218268,1.); +#218268 = DIRECTION('',(-1.413450270035E-03,-0.999999001079,0.)); +#218269 = ORIENTED_EDGE('',*,*,#218270,.T.); +#218270 = EDGE_CURVE('',#218263,#218271,#218273,.T.); +#218271 = VERTEX_POINT('',#218272); +#218272 = CARTESIAN_POINT('',(111.019051,-66.5672,1.585)); +#218273 = CIRCLE('',#218274,0.1249997864); +#218274 = AXIS2_PLACEMENT_3D('',#218275,#218276,#218277); +#218275 = CARTESIAN_POINT('',(111.141649,-66.542814,1.585)); +#218276 = DIRECTION('',(-0.,0.,-1.)); +#218277 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218278 = ORIENTED_EDGE('',*,*,#218279,.T.); +#218279 = EDGE_CURVE('',#218271,#218280,#218282,.T.); +#218280 = VERTEX_POINT('',#218281); +#218281 = CARTESIAN_POINT('',(111.016649,-64.867814,1.585)); +#218282 = LINE('',#218283,#218284); +#218283 = CARTESIAN_POINT('',(111.019051,-66.5672,1.585)); +#218284 = VECTOR('',#218285,1.); +#218285 = DIRECTION('',(-1.413450270035E-03,0.999999001079,0.)); +#218286 = ORIENTED_EDGE('',*,*,#218287,.T.); +#218287 = EDGE_CURVE('',#218280,#218227,#218288,.T.); +#218288 = LINE('',#218289,#218290); +#218289 = CARTESIAN_POINT('',(111.016649,-64.867814,1.585)); +#218290 = VECTOR('',#218291,1.); +#218291 = DIRECTION('',(-0.999983142515,5.806434828344E-03,0.)); +#218292 = PLANE('',#218293); +#218293 = AXIS2_PLACEMENT_3D('',#218294,#218295,#218296); +#218294 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218295 = DIRECTION('',(0.,0.,1.)); +#218296 = DIRECTION('',(1.,0.,-0.)); +#218297 = SHELL_BASED_SURFACE_MODEL('',(#218298)); +#218298 = OPEN_SHELL('',(#218299)); +#218299 = ADVANCED_FACE('',(#218300),#218443,.T.); +#218300 = FACE_BOUND('',#218301,.F.); +#218301 = EDGE_LOOP('',(#218302,#218312,#218320,#218328,#218336,#218345, + #218353,#218362,#218370,#218378,#218387,#218395,#218403,#218412, + #218420,#218429,#218437)); +#218302 = ORIENTED_EDGE('',*,*,#218303,.T.); +#218303 = EDGE_CURVE('',#218304,#218306,#218308,.T.); +#218304 = VERTEX_POINT('',#218305); +#218305 = CARTESIAN_POINT('',(113.355151,-64.668871,1.585)); +#218306 = VERTEX_POINT('',#218307); +#218307 = CARTESIAN_POINT('',(113.39112,-64.635931,1.585)); +#218308 = LINE('',#218309,#218310); +#218309 = CARTESIAN_POINT('',(113.355151,-64.668871,1.585)); +#218310 = VECTOR('',#218311,1.); +#218311 = DIRECTION('',(0.737476612799,0.675372671623,0.)); +#218312 = ORIENTED_EDGE('',*,*,#218313,.T.); +#218313 = EDGE_CURVE('',#218306,#218314,#218316,.T.); +#218314 = VERTEX_POINT('',#218315); +#218315 = CARTESIAN_POINT('',(113.436957,-64.619263,1.585)); +#218316 = LINE('',#218317,#218318); +#218317 = CARTESIAN_POINT('',(113.39112,-64.635931,1.585)); +#218318 = VECTOR('',#218319,1.); +#218319 = DIRECTION('',(0.939793423488,0.341743063087,0.)); +#218320 = ORIENTED_EDGE('',*,*,#218321,.T.); +#218321 = EDGE_CURVE('',#218314,#218322,#218324,.T.); +#218322 = VERTEX_POINT('',#218323); +#218323 = CARTESIAN_POINT('',(113.458635,-64.620216,1.585)); +#218324 = LINE('',#218325,#218326); +#218325 = CARTESIAN_POINT('',(113.436957,-64.619263,1.585)); +#218326 = VECTOR('',#218327,1.); +#218327 = DIRECTION('',(0.999035086367,-4.39192009089E-02,0.)); +#218328 = ORIENTED_EDGE('',*,*,#218329,.T.); +#218329 = EDGE_CURVE('',#218322,#218330,#218332,.T.); +#218330 = VERTEX_POINT('',#218331); +#218331 = CARTESIAN_POINT('',(113.485682,-64.621405,1.585)); +#218332 = LINE('',#218333,#218334); +#218333 = CARTESIAN_POINT('',(113.458635,-64.620216,1.585)); +#218334 = VECTOR('',#218335,1.); +#218335 = DIRECTION('',(0.999035134886,-4.391809721508E-02,0.)); +#218336 = ORIENTED_EDGE('',*,*,#218337,.T.); +#218337 = EDGE_CURVE('',#218330,#218338,#218340,.T.); +#218338 = VERTEX_POINT('',#218339); +#218339 = CARTESIAN_POINT('',(113.579356,-64.726786,1.585)); +#218340 = CIRCLE('',#218341,0.12381321241); +#218341 = AXIS2_PLACEMENT_3D('',#218342,#218343,#218344); +#218342 = CARTESIAN_POINT('',(113.45644637775,-64.74171705242,1.585)); +#218343 = DIRECTION('',(0.,0.,-1.)); +#218344 = DIRECTION('',(0.236126837172,0.971722242602,0.)); +#218345 = ORIENTED_EDGE('',*,*,#218346,.T.); +#218346 = EDGE_CURVE('',#218338,#218347,#218349,.T.); +#218347 = VERTEX_POINT('',#218348); +#218348 = CARTESIAN_POINT('',(113.578533,-66.5672,1.585)); +#218349 = LINE('',#218350,#218351); +#218350 = CARTESIAN_POINT('',(113.579356,-64.726786,1.585)); +#218351 = VECTOR('',#218352,1.); +#218352 = DIRECTION('',(-4.471819480415E-04,-0.999999900014,0.)); +#218353 = ORIENTED_EDGE('',*,*,#218354,.T.); +#218354 = EDGE_CURVE('',#218347,#218355,#218357,.T.); +#218355 = VERTEX_POINT('',#218356); +#218356 = CARTESIAN_POINT('',(113.333337,-66.5672,1.585)); +#218357 = CIRCLE('',#218358,0.1249997864); +#218358 = AXIS2_PLACEMENT_3D('',#218359,#218360,#218361); +#218359 = CARTESIAN_POINT('',(113.455935,-66.542814,1.585)); +#218360 = DIRECTION('',(-0.,0.,-1.)); +#218361 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218362 = ORIENTED_EDGE('',*,*,#218363,.T.); +#218363 = EDGE_CURVE('',#218355,#218364,#218366,.T.); +#218364 = VERTEX_POINT('',#218365); +#218365 = CARTESIAN_POINT('',(113.330935,-65.306259,1.585)); +#218366 = LINE('',#218367,#218368); +#218367 = CARTESIAN_POINT('',(113.333337,-66.5672,1.585)); +#218368 = VECTOR('',#218369,1.); +#218369 = DIRECTION('',(-1.904923102582E-03,0.999998185632,0.)); +#218370 = ORIENTED_EDGE('',*,*,#218371,.T.); +#218371 = EDGE_CURVE('',#218364,#218372,#218374,.T.); +#218372 = VERTEX_POINT('',#218373); +#218373 = CARTESIAN_POINT('',(112.956719,-66.102471,1.585)); +#218374 = LINE('',#218375,#218376); +#218375 = CARTESIAN_POINT('',(113.330935,-65.306259,1.585)); +#218376 = VECTOR('',#218377,1.); +#218377 = DIRECTION('',(-0.425357750962,-0.905025294506,0.)); +#218378 = ORIENTED_EDGE('',*,*,#218379,.T.); +#218379 = EDGE_CURVE('',#218372,#218380,#218382,.T.); +#218380 = VERTEX_POINT('',#218381); +#218381 = CARTESIAN_POINT('',(112.747951,-66.090318,1.585)); +#218382 = CIRCLE('',#218383,0.124429658313); +#218383 = AXIS2_PLACEMENT_3D('',#218384,#218385,#218386); +#218384 = CARTESIAN_POINT('',(112.85625495375,-66.02905631973,1.585)); +#218385 = DIRECTION('',(-0.,0.,-1.)); +#218386 = DIRECTION('',(0.807396304151,-0.590009498265,-0.)); +#218387 = ORIENTED_EDGE('',*,*,#218388,.T.); +#218388 = EDGE_CURVE('',#218380,#218389,#218391,.T.); +#218389 = VERTEX_POINT('',#218390); +#218390 = CARTESIAN_POINT('',(112.380935,-65.306259,1.585)); +#218391 = LINE('',#218392,#218393); +#218392 = CARTESIAN_POINT('',(112.747951,-66.090318,1.585)); +#218393 = VECTOR('',#218394,1.); +#218394 = DIRECTION('',(-0.423949258664,0.905685942299,0.)); +#218395 = ORIENTED_EDGE('',*,*,#218396,.T.); +#218396 = EDGE_CURVE('',#218389,#218397,#218399,.T.); +#218397 = VERTEX_POINT('',#218398); +#218398 = CARTESIAN_POINT('',(112.378533,-66.5672,1.585)); +#218399 = LINE('',#218400,#218401); +#218400 = CARTESIAN_POINT('',(112.380935,-65.306259,1.585)); +#218401 = VECTOR('',#218402,1.); +#218402 = DIRECTION('',(-1.90492310257E-03,-0.999998185632,0.)); +#218403 = ORIENTED_EDGE('',*,*,#218404,.T.); +#218404 = EDGE_CURVE('',#218397,#218405,#218407,.T.); +#218405 = VERTEX_POINT('',#218406); +#218406 = CARTESIAN_POINT('',(112.133337,-66.5672,1.585)); +#218407 = CIRCLE('',#218408,0.1249997864); +#218408 = AXIS2_PLACEMENT_3D('',#218409,#218410,#218411); +#218409 = CARTESIAN_POINT('',(112.255935,-66.542814,1.585)); +#218410 = DIRECTION('',(-0.,0.,-1.)); +#218411 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218412 = ORIENTED_EDGE('',*,*,#218413,.T.); +#218413 = EDGE_CURVE('',#218405,#218414,#218416,.T.); +#218414 = VERTEX_POINT('',#218415); +#218415 = CARTESIAN_POINT('',(112.133337,-64.718428,1.585)); +#218416 = LINE('',#218417,#218418); +#218417 = CARTESIAN_POINT('',(112.133337,-66.5672,1.585)); +#218418 = VECTOR('',#218419,1.); +#218419 = DIRECTION('',(0.,1.,0.)); +#218420 = ORIENTED_EDGE('',*,*,#218421,.T.); +#218421 = EDGE_CURVE('',#218414,#218422,#218424,.T.); +#218422 = VERTEX_POINT('',#218423); +#218423 = CARTESIAN_POINT('',(112.360998,-64.676095,1.585)); +#218424 = CIRCLE('',#218425,0.124570928096); +#218425 = AXIS2_PLACEMENT_3D('',#218426,#218427,#218428); +#218426 = CARTESIAN_POINT('',(112.25557000477,-64.74244900477,1.585)); +#218427 = DIRECTION('',(0.,0.,-1.)); +#218428 = DIRECTION('',(-0.981232191516,0.192829941483,0.)); +#218429 = ORIENTED_EDGE('',*,*,#218430,.T.); +#218430 = EDGE_CURVE('',#218422,#218431,#218433,.T.); +#218431 = VERTEX_POINT('',#218432); +#218432 = CARTESIAN_POINT('',(112.855934,-65.732939,1.585)); +#218433 = LINE('',#218434,#218435); +#218434 = CARTESIAN_POINT('',(112.360998,-64.676095,1.585)); +#218435 = VECTOR('',#218436,1.); +#218436 = DIRECTION('',(0.424110946599,-0.905610238996,0.)); +#218437 = ORIENTED_EDGE('',*,*,#218438,.T.); +#218438 = EDGE_CURVE('',#218431,#218304,#218439,.T.); +#218439 = LINE('',#218440,#218441); +#218440 = CARTESIAN_POINT('',(112.855934,-65.732939,1.585)); +#218441 = VECTOR('',#218442,1.); +#218442 = DIRECTION('',(0.424737369134,0.905316611612,0.)); +#218443 = PLANE('',#218444); +#218444 = AXIS2_PLACEMENT_3D('',#218445,#218446,#218447); +#218445 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218446 = DIRECTION('',(0.,0.,1.)); +#218447 = DIRECTION('',(1.,0.,-0.)); +#218448 = SHELL_BASED_SURFACE_MODEL('',(#218449)); +#218449 = OPEN_SHELL('',(#218450)); +#218450 = ADVANCED_FACE('',(#218451),#218657,.T.); +#218451 = FACE_BOUND('',#218452,.F.); +#218452 = EDGE_LOOP('',(#218453,#218463,#218471,#218479,#218487,#218495, + #218503,#218511,#218519,#218527,#218535,#218543,#218551,#218559, + #218568,#218576,#218585,#218593,#218601,#218609,#218618,#218626, + #218634,#218642,#218651)); +#218453 = ORIENTED_EDGE('',*,*,#218454,.T.); +#218454 = EDGE_CURVE('',#218455,#218457,#218459,.T.); +#218455 = VERTEX_POINT('',#218456); +#218456 = CARTESIAN_POINT('',(115.957918,-64.724595,1.585)); +#218457 = VERTEX_POINT('',#218458); +#218458 = CARTESIAN_POINT('',(116.165777,-64.622253,1.585)); +#218459 = LINE('',#218460,#218461); +#218460 = CARTESIAN_POINT('',(115.957918,-64.724595,1.585)); +#218461 = VECTOR('',#218462,1.); +#218462 = DIRECTION('',(0.897151150926,0.441723683305,0.)); +#218463 = ORIENTED_EDGE('',*,*,#218464,.T.); +#218464 = EDGE_CURVE('',#218457,#218465,#218467,.T.); +#218465 = VERTEX_POINT('',#218466); +#218466 = CARTESIAN_POINT('',(116.198793,-64.617814,1.585)); +#218467 = LINE('',#218468,#218469); +#218468 = CARTESIAN_POINT('',(116.165777,-64.622253,1.585)); +#218469 = VECTOR('',#218470,1.); +#218470 = DIRECTION('',(0.991082325355,0.133250982622,0.)); +#218471 = ORIENTED_EDGE('',*,*,#218472,.T.); +#218472 = EDGE_CURVE('',#218465,#218473,#218475,.T.); +#218473 = VERTEX_POINT('',#218474); +#218474 = CARTESIAN_POINT('',(116.65175,-64.620216,1.585)); +#218475 = LINE('',#218476,#218477); +#218476 = CARTESIAN_POINT('',(116.198793,-64.617814,1.585)); +#218477 = VECTOR('',#218478,1.); +#218478 = DIRECTION('',(0.999985939755,-5.302857064344E-03,0.)); +#218479 = ORIENTED_EDGE('',*,*,#218480,.T.); +#218480 = EDGE_CURVE('',#218473,#218481,#218483,.T.); +#218481 = VERTEX_POINT('',#218482); +#218482 = CARTESIAN_POINT('',(116.683265,-64.63101,1.585)); +#218483 = LINE('',#218484,#218485); +#218484 = CARTESIAN_POINT('',(116.65175,-64.620216,1.585)); +#218485 = VECTOR('',#218486,1.); +#218486 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#218487 = ORIENTED_EDGE('',*,*,#218488,.T.); +#218488 = EDGE_CURVE('',#218481,#218489,#218491,.T.); +#218489 = VERTEX_POINT('',#218490); +#218490 = CARTESIAN_POINT('',(116.875432,-64.729778,1.585)); +#218491 = LINE('',#218492,#218493); +#218492 = CARTESIAN_POINT('',(116.683265,-64.63101,1.585)); +#218493 = VECTOR('',#218494,1.); +#218494 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#218495 = ORIENTED_EDGE('',*,*,#218496,.T.); +#218496 = EDGE_CURVE('',#218489,#218497,#218499,.T.); +#218497 = VERTEX_POINT('',#218498); +#218498 = CARTESIAN_POINT('',(116.98844,-64.844796,1.585)); +#218499 = LINE('',#218500,#218501); +#218500 = CARTESIAN_POINT('',(116.875432,-64.729778,1.585)); +#218501 = VECTOR('',#218502,1.); +#218502 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#218503 = ORIENTED_EDGE('',*,*,#218504,.T.); +#218504 = EDGE_CURVE('',#218497,#218505,#218507,.T.); +#218505 = VERTEX_POINT('',#218506); +#218506 = CARTESIAN_POINT('',(117.090782,-65.052655,1.585)); +#218507 = LINE('',#218508,#218509); +#218508 = CARTESIAN_POINT('',(116.98844,-64.844796,1.585)); +#218509 = VECTOR('',#218510,1.); +#218510 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#218511 = ORIENTED_EDGE('',*,*,#218512,.T.); +#218512 = EDGE_CURVE('',#218505,#218513,#218515,.T.); +#218513 = VERTEX_POINT('',#218514); +#218514 = CARTESIAN_POINT('',(117.095221,-65.085671,1.585)); +#218515 = LINE('',#218516,#218517); +#218516 = CARTESIAN_POINT('',(117.090782,-65.052655,1.585)); +#218517 = VECTOR('',#218518,1.); +#218518 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#218519 = ORIENTED_EDGE('',*,*,#218520,.T.); +#218520 = EDGE_CURVE('',#218513,#218521,#218523,.T.); +#218521 = VERTEX_POINT('',#218522); +#218522 = CARTESIAN_POINT('',(117.092819,-65.281486,1.585)); +#218523 = LINE('',#218524,#218525); +#218524 = CARTESIAN_POINT('',(117.095221,-65.085671,1.585)); +#218525 = VECTOR('',#218526,1.); +#218526 = DIRECTION('',(-1.226575749649E-02,-0.999924772767,0.)); +#218527 = ORIENTED_EDGE('',*,*,#218528,.T.); +#218528 = EDGE_CURVE('',#218521,#218529,#218531,.T.); +#218529 = VERTEX_POINT('',#218530); +#218530 = CARTESIAN_POINT('',(116.993102,-65.576145,1.585)); +#218531 = LINE('',#218532,#218533); +#218532 = CARTESIAN_POINT('',(117.092819,-65.281486,1.585)); +#218533 = VECTOR('',#218534,1.); +#218534 = DIRECTION('',(-0.320556548827,-0.947229380353,0.)); +#218535 = ORIENTED_EDGE('',*,*,#218536,.T.); +#218536 = EDGE_CURVE('',#218529,#218537,#218539,.T.); +#218537 = VERTEX_POINT('',#218538); +#218538 = CARTESIAN_POINT('',(116.972895,-65.602631,1.585)); +#218539 = LINE('',#218540,#218541); +#218540 = CARTESIAN_POINT('',(116.993102,-65.576145,1.585)); +#218541 = VECTOR('',#218542,1.); +#218542 = DIRECTION('',(-0.606559497005,-0.795038097574,0.)); +#218543 = ORIENTED_EDGE('',*,*,#218544,.T.); +#218544 = EDGE_CURVE('',#218537,#218545,#218547,.T.); +#218545 = VERTEX_POINT('',#218546); +#218546 = CARTESIAN_POINT('',(116.157711,-66.417814,1.585)); +#218547 = LINE('',#218548,#218549); +#218548 = CARTESIAN_POINT('',(116.972895,-65.602631,1.585)); +#218549 = VECTOR('',#218550,1.); +#218550 = DIRECTION('',(-0.707107214897,-0.707106347476,0.)); +#218551 = ORIENTED_EDGE('',*,*,#218552,.T.); +#218552 = EDGE_CURVE('',#218545,#218553,#218555,.T.); +#218553 = VERTEX_POINT('',#218554); +#218554 = CARTESIAN_POINT('',(116.994607,-66.420216,1.585)); +#218555 = LINE('',#218556,#218557); +#218556 = CARTESIAN_POINT('',(116.157711,-66.417814,1.585)); +#218557 = VECTOR('',#218558,1.); +#218558 = DIRECTION('',(0.999995881203,-2.870117800348E-03,0.)); +#218559 = ORIENTED_EDGE('',*,*,#218560,.T.); +#218560 = EDGE_CURVE('',#218553,#218561,#218563,.T.); +#218561 = VERTEX_POINT('',#218562); +#218562 = CARTESIAN_POINT('',(116.994607,-66.665412,1.585)); +#218563 = CIRCLE('',#218564,0.1249997864); +#218564 = AXIS2_PLACEMENT_3D('',#218565,#218566,#218567); +#218565 = CARTESIAN_POINT('',(116.970221,-66.542814,1.585)); +#218566 = DIRECTION('',(0.,0.,-1.)); +#218567 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218568 = ORIENTED_EDGE('',*,*,#218569,.T.); +#218569 = EDGE_CURVE('',#218561,#218570,#218572,.T.); +#218570 = VERTEX_POINT('',#218571); +#218571 = CARTESIAN_POINT('',(115.831548,-66.665412,1.585)); +#218572 = LINE('',#218573,#218574); +#218573 = CARTESIAN_POINT('',(116.994607,-66.665412,1.585)); +#218574 = VECTOR('',#218575,1.); +#218575 = DIRECTION('',(-1.,0.,0.)); +#218576 = ORIENTED_EDGE('',*,*,#218577,.T.); +#218577 = EDGE_CURVE('',#218570,#218578,#218580,.T.); +#218578 = VERTEX_POINT('',#218579); +#218579 = CARTESIAN_POINT('',(115.752006,-66.473362,1.585)); +#218580 = CIRCLE('',#218581,0.124999123629); +#218581 = AXIS2_PLACEMENT_3D('',#218582,#218583,#218584); +#218582 = CARTESIAN_POINT('',(115.85593432933,-66.54281474126,1.585)); +#218583 = DIRECTION('',(0.,0.,-1.)); +#218584 = DIRECTION('',(-0.195092002484,-0.980784946136,-0.)); +#218585 = ORIENTED_EDGE('',*,*,#218586,.T.); +#218586 = EDGE_CURVE('',#218578,#218587,#218589,.T.); +#218587 = VERTEX_POINT('',#218588); +#218588 = CARTESIAN_POINT('',(116.775253,-65.446718,1.585)); +#218589 = LINE('',#218590,#218591); +#218590 = CARTESIAN_POINT('',(115.752006,-66.473362,1.585)); +#218591 = VECTOR('',#218592,1.); +#218592 = DIRECTION('',(0.705934021894,0.708277598638,0.)); +#218593 = ORIENTED_EDGE('',*,*,#218594,.T.); +#218594 = EDGE_CURVE('',#218587,#218595,#218597,.T.); +#218595 = VERTEX_POINT('',#218596); +#218596 = CARTESIAN_POINT('',(116.845221,-65.236814,1.585)); +#218597 = LINE('',#218598,#218599); +#218598 = CARTESIAN_POINT('',(116.775253,-65.446718,1.585)); +#218599 = VECTOR('',#218600,1.); +#218600 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#218601 = ORIENTED_EDGE('',*,*,#218602,.T.); +#218602 = EDGE_CURVE('',#218595,#218603,#218605,.T.); +#218603 = VERTEX_POINT('',#218604); +#218604 = CARTESIAN_POINT('',(116.845221,-65.115179,1.585)); +#218605 = LINE('',#218606,#218607); +#218606 = CARTESIAN_POINT('',(116.845221,-65.236814,1.585)); +#218607 = VECTOR('',#218608,1.); +#218608 = DIRECTION('',(0.,1.,0.)); +#218609 = ORIENTED_EDGE('',*,*,#218610,.T.); +#218610 = EDGE_CURVE('',#218603,#218611,#218613,.T.); +#218611 = VERTEX_POINT('',#218612); +#218612 = CARTESIAN_POINT('',(116.597855,-64.867814,1.585)); +#218613 = CIRCLE('',#218614,0.347631916063); +#218614 = AXIS2_PLACEMENT_3D('',#218615,#218616,#218617); +#218615 = CARTESIAN_POINT('',(116.50910831879,-65.20392703997,1.585)); +#218616 = DIRECTION('',(0.,0.,1.)); +#218617 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#218618 = ORIENTED_EDGE('',*,*,#218619,.T.); +#218619 = EDGE_CURVE('',#218611,#218620,#218622,.T.); +#218620 = VERTEX_POINT('',#218621); +#218621 = CARTESIAN_POINT('',(116.228302,-64.867814,1.585)); +#218622 = LINE('',#218623,#218624); +#218623 = CARTESIAN_POINT('',(116.597855,-64.867814,1.585)); +#218624 = VECTOR('',#218625,1.); +#218625 = DIRECTION('',(-1.,0.,0.)); +#218626 = ORIENTED_EDGE('',*,*,#218627,.T.); +#218627 = EDGE_CURVE('',#218620,#218628,#218630,.T.); +#218628 = VERTEX_POINT('',#218629); +#218629 = CARTESIAN_POINT('',(116.101406,-64.931261,1.585)); +#218630 = LINE('',#218631,#218632); +#218631 = CARTESIAN_POINT('',(116.228302,-64.867814,1.585)); +#218632 = VECTOR('',#218633,1.); +#218633 = DIRECTION('',(-0.894430010393,-0.447207956669,0.)); +#218634 = ORIENTED_EDGE('',*,*,#218635,.T.); +#218635 = EDGE_CURVE('',#218628,#218636,#218638,.T.); +#218636 = VERTEX_POINT('',#218637); +#218637 = CARTESIAN_POINT('',(116.011096,-65.018175,1.585)); +#218638 = LINE('',#218639,#218640); +#218639 = CARTESIAN_POINT('',(116.101406,-64.931261,1.585)); +#218640 = VECTOR('',#218641,1.); +#218641 = DIRECTION('',(-0.720524223499,-0.693429768146,0.)); +#218642 = ORIENTED_EDGE('',*,*,#218643,.T.); +#218643 = EDGE_CURVE('',#218636,#218644,#218646,.T.); +#218644 = VERTEX_POINT('',#218645); +#218645 = CARTESIAN_POINT('',(115.837717,-64.844796,1.585)); +#218646 = CIRCLE('',#218647,0.124999261618); +#218647 = AXIS2_PLACEMENT_3D('',#218648,#218649,#218650); +#218648 = CARTESIAN_POINT('',(115.94165,-64.914242,1.585)); +#218649 = DIRECTION('',(0.,0.,-1.)); +#218650 = DIRECTION('',(0.555571281792,-0.831468911535,0.)); +#218651 = ORIENTED_EDGE('',*,*,#218652,.T.); +#218652 = EDGE_CURVE('',#218644,#218455,#218653,.T.); +#218653 = LINE('',#218654,#218655); +#218654 = CARTESIAN_POINT('',(115.837717,-64.844796,1.585)); +#218655 = VECTOR('',#218656,1.); +#218656 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#218657 = PLANE('',#218658); +#218658 = AXIS2_PLACEMENT_3D('',#218659,#218660,#218661); +#218659 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218660 = DIRECTION('',(0.,0.,1.)); +#218661 = DIRECTION('',(1.,0.,-0.)); +#218662 = SHELL_BASED_SURFACE_MODEL('',(#218663)); +#218663 = OPEN_SHELL('',(#218664)); +#218664 = ADVANCED_FACE('',(#218665),#218759,.T.); +#218665 = FACE_BOUND('',#218666,.F.); +#218666 = EDGE_LOOP('',(#218667,#218678,#218686,#218695,#218703,#218711, + #218719,#218728,#218736,#218744,#218753)); +#218667 = ORIENTED_EDGE('',*,*,#218668,.T.); +#218668 = EDGE_CURVE('',#218669,#218671,#218673,.T.); +#218669 = VERTEX_POINT('',#218670); +#218670 = CARTESIAN_POINT('',(117.619052,-64.718428,1.585)); +#218671 = VERTEX_POINT('',#218672); +#218672 = CARTESIAN_POINT('',(117.717264,-64.620216,1.585)); +#218673 = CIRCLE('',#218674,0.124998078635); +#218674 = AXIS2_PLACEMENT_3D('',#218675,#218676,#218677); +#218675 = CARTESIAN_POINT('',(117.74164854765,-64.74281254765,1.585)); +#218676 = DIRECTION('',(0.,0.,-1.)); +#218677 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#218678 = ORIENTED_EDGE('',*,*,#218679,.T.); +#218679 = EDGE_CURVE('',#218671,#218680,#218682,.T.); +#218680 = VERTEX_POINT('',#218681); +#218681 = CARTESIAN_POINT('',(118.623179,-64.620216,1.585)); +#218682 = LINE('',#218683,#218684); +#218683 = CARTESIAN_POINT('',(117.717264,-64.620216,1.585)); +#218684 = VECTOR('',#218685,1.); +#218685 = DIRECTION('',(1.,0.,0.)); +#218686 = ORIENTED_EDGE('',*,*,#218687,.T.); +#218687 = EDGE_CURVE('',#218680,#218688,#218690,.T.); +#218688 = VERTEX_POINT('',#218689); +#218689 = CARTESIAN_POINT('',(118.623179,-64.865412,1.585)); +#218690 = CIRCLE('',#218691,0.1249997864); +#218691 = AXIS2_PLACEMENT_3D('',#218692,#218693,#218694); +#218692 = CARTESIAN_POINT('',(118.598793,-64.742814,1.585)); +#218693 = DIRECTION('',(0.,0.,-1.)); +#218694 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218695 = ORIENTED_EDGE('',*,*,#218696,.T.); +#218696 = EDGE_CURVE('',#218688,#218697,#218699,.T.); +#218697 = VERTEX_POINT('',#218698); +#218698 = CARTESIAN_POINT('',(117.86665,-64.867814,1.585)); +#218699 = LINE('',#218700,#218701); +#218700 = CARTESIAN_POINT('',(118.623179,-64.865412,1.585)); +#218701 = VECTOR('',#218702,1.); +#218702 = DIRECTION('',(-0.99999495964,-3.175010995011E-03,0.)); +#218703 = ORIENTED_EDGE('',*,*,#218704,.T.); +#218704 = EDGE_CURVE('',#218697,#218705,#218707,.T.); +#218705 = VERTEX_POINT('',#218706); +#218706 = CARTESIAN_POINT('',(117.86665,-65.474957,1.585)); +#218707 = LINE('',#218708,#218709); +#218708 = CARTESIAN_POINT('',(117.86665,-64.867814,1.585)); +#218709 = VECTOR('',#218710,1.); +#218710 = DIRECTION('',(0.,-1.,0.)); +#218711 = ORIENTED_EDGE('',*,*,#218712,.T.); +#218712 = EDGE_CURVE('',#218705,#218713,#218715,.T.); +#218713 = VERTEX_POINT('',#218714); +#218714 = CARTESIAN_POINT('',(118.366036,-65.477359,1.585)); +#218715 = LINE('',#218716,#218717); +#218716 = CARTESIAN_POINT('',(117.86665,-65.474957,1.585)); +#218717 = VECTOR('',#218718,1.); +#218718 = DIRECTION('',(0.9999884326,-4.809850927157E-03,0.)); +#218719 = ORIENTED_EDGE('',*,*,#218720,.T.); +#218720 = EDGE_CURVE('',#218713,#218721,#218723,.T.); +#218721 = VERTEX_POINT('',#218722); +#218722 = CARTESIAN_POINT('',(118.366036,-65.722555,1.585)); +#218723 = CIRCLE('',#218724,0.1249997864); +#218724 = AXIS2_PLACEMENT_3D('',#218725,#218726,#218727); +#218725 = CARTESIAN_POINT('',(118.34165,-65.599957,1.585)); +#218726 = DIRECTION('',(0.,0.,-1.)); +#218727 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218728 = ORIENTED_EDGE('',*,*,#218729,.T.); +#218729 = EDGE_CURVE('',#218721,#218730,#218732,.T.); +#218730 = VERTEX_POINT('',#218731); +#218731 = CARTESIAN_POINT('',(117.86665,-65.724957,1.585)); +#218732 = LINE('',#218733,#218734); +#218733 = CARTESIAN_POINT('',(118.366036,-65.722555,1.585)); +#218734 = VECTOR('',#218735,1.); +#218735 = DIRECTION('',(-0.9999884326,-4.809850927157E-03,0.)); +#218736 = ORIENTED_EDGE('',*,*,#218737,.T.); +#218737 = EDGE_CURVE('',#218730,#218738,#218740,.T.); +#218738 = VERTEX_POINT('',#218739); +#218739 = CARTESIAN_POINT('',(117.864248,-66.5672,1.585)); +#218740 = LINE('',#218741,#218742); +#218741 = CARTESIAN_POINT('',(117.86665,-65.724957,1.585)); +#218742 = VECTOR('',#218743,1.); +#218743 = DIRECTION('',(-2.851896936954E-03,-0.999995933334,0.)); +#218744 = ORIENTED_EDGE('',*,*,#218745,.T.); +#218745 = EDGE_CURVE('',#218738,#218746,#218748,.T.); +#218746 = VERTEX_POINT('',#218747); +#218747 = CARTESIAN_POINT('',(117.619052,-66.5672,1.585)); +#218748 = CIRCLE('',#218749,0.1249997864); +#218749 = AXIS2_PLACEMENT_3D('',#218750,#218751,#218752); +#218750 = CARTESIAN_POINT('',(117.74165,-66.542814,1.585)); +#218751 = DIRECTION('',(-0.,0.,-1.)); +#218752 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218753 = ORIENTED_EDGE('',*,*,#218754,.T.); +#218754 = EDGE_CURVE('',#218746,#218669,#218755,.T.); +#218755 = LINE('',#218756,#218757); +#218756 = CARTESIAN_POINT('',(117.619052,-66.5672,1.585)); +#218757 = VECTOR('',#218758,1.); +#218758 = DIRECTION('',(0.,1.,0.)); +#218759 = PLANE('',#218760); +#218760 = AXIS2_PLACEMENT_3D('',#218761,#218762,#218763); +#218761 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218762 = DIRECTION('',(0.,0.,1.)); +#218763 = DIRECTION('',(1.,0.,-0.)); +#218764 = SHELL_BASED_SURFACE_MODEL('',(#218765)); +#218765 = OPEN_SHELL('',(#218766)); +#218766 = ADVANCED_FACE('',(#218767),#218902,.T.); +#218767 = FACE_BOUND('',#218768,.F.); +#218768 = EDGE_LOOP('',(#218769,#218780,#218788,#218796,#218804,#218813, + #218821,#218829,#218838,#218846,#218854,#218863,#218871,#218879, + #218888,#218896)); +#218769 = ORIENTED_EDGE('',*,*,#218770,.T.); +#218770 = EDGE_CURVE('',#218771,#218773,#218775,.T.); +#218771 = VERTEX_POINT('',#218772); +#218772 = CARTESIAN_POINT('',(119.550724,-64.558351,1.585)); +#218773 = VERTEX_POINT('',#218774); +#218774 = CARTESIAN_POINT('',(119.751382,-64.672735,1.585)); +#218775 = CIRCLE('',#218776,0.125000268242); +#218776 = AXIS2_PLACEMENT_3D('',#218777,#218778,#218779); +#218777 = CARTESIAN_POINT('',(119.62736332303,-64.65710058848,1.585)); +#218778 = DIRECTION('',(0.,0.,-1.)); +#218779 = DIRECTION('',(-0.613113268549,0.789995012598,0.)); +#218780 = ORIENTED_EDGE('',*,*,#218781,.T.); +#218781 = EDGE_CURVE('',#218773,#218782,#218784,.T.); +#218782 = VERTEX_POINT('',#218783); +#218783 = CARTESIAN_POINT('',(119.372221,-65.817814,1.585)); +#218784 = LINE('',#218785,#218786); +#218785 = CARTESIAN_POINT('',(119.751382,-64.672735,1.585)); +#218786 = VECTOR('',#218787,1.); +#218787 = DIRECTION('',(-0.31433793287,-0.949311152341,0.)); +#218788 = ORIENTED_EDGE('',*,*,#218789,.T.); +#218789 = EDGE_CURVE('',#218782,#218790,#218792,.T.); +#218790 = VERTEX_POINT('',#218791); +#218791 = CARTESIAN_POINT('',(119.930936,-65.817814,1.585)); +#218792 = LINE('',#218793,#218794); +#218793 = CARTESIAN_POINT('',(119.372221,-65.817814,1.585)); +#218794 = VECTOR('',#218795,1.); +#218795 = DIRECTION('',(1.,0.,0.)); +#218796 = ORIENTED_EDGE('',*,*,#218797,.T.); +#218797 = EDGE_CURVE('',#218790,#218798,#218800,.T.); +#218798 = VERTEX_POINT('',#218799); +#218799 = CARTESIAN_POINT('',(119.933338,-65.318428,1.585)); +#218800 = LINE('',#218801,#218802); +#218801 = CARTESIAN_POINT('',(119.930936,-65.817814,1.585)); +#218802 = VECTOR('',#218803,1.); +#218803 = DIRECTION('',(4.809850927157E-03,0.9999884326,0.)); +#218804 = ORIENTED_EDGE('',*,*,#218805,.T.); +#218805 = EDGE_CURVE('',#218798,#218806,#218808,.T.); +#218806 = VERTEX_POINT('',#218807); +#218807 = CARTESIAN_POINT('',(120.178534,-65.318428,1.585)); +#218808 = CIRCLE('',#218809,0.1249997864); +#218809 = AXIS2_PLACEMENT_3D('',#218810,#218811,#218812); +#218810 = CARTESIAN_POINT('',(120.055936,-65.342814,1.585)); +#218811 = DIRECTION('',(0.,0.,-1.)); +#218812 = DIRECTION('',(-0.980785675968,0.195088333367,0.)); +#218813 = ORIENTED_EDGE('',*,*,#218814,.T.); +#218814 = EDGE_CURVE('',#218806,#218815,#218817,.T.); +#218815 = VERTEX_POINT('',#218816); +#218816 = CARTESIAN_POINT('',(120.180936,-65.817814,1.585)); +#218817 = LINE('',#218818,#218819); +#218818 = CARTESIAN_POINT('',(120.178534,-65.318428,1.585)); +#218819 = VECTOR('',#218820,1.); +#218820 = DIRECTION('',(4.809850927157E-03,-0.9999884326,0.)); +#218821 = ORIENTED_EDGE('',*,*,#218822,.T.); +#218822 = EDGE_CURVE('',#218815,#218823,#218825,.T.); +#218823 = VERTEX_POINT('',#218824); +#218824 = CARTESIAN_POINT('',(120.337464,-65.820216,1.585)); +#218825 = LINE('',#218826,#218827); +#218826 = CARTESIAN_POINT('',(120.180936,-65.817814,1.585)); +#218827 = VECTOR('',#218828,1.); +#218828 = DIRECTION('',(0.999882278647,-1.534369079854E-02,0.)); +#218829 = ORIENTED_EDGE('',*,*,#218830,.T.); +#218830 = EDGE_CURVE('',#218823,#218831,#218833,.T.); +#218831 = VERTEX_POINT('',#218832); +#218832 = CARTESIAN_POINT('',(120.337464,-66.065412,1.585)); +#218833 = CIRCLE('',#218834,0.1249997864); +#218834 = AXIS2_PLACEMENT_3D('',#218835,#218836,#218837); +#218835 = CARTESIAN_POINT('',(120.313078,-65.942814,1.585)); +#218836 = DIRECTION('',(0.,0.,-1.)); +#218837 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218838 = ORIENTED_EDGE('',*,*,#218839,.T.); +#218839 = EDGE_CURVE('',#218831,#218840,#218842,.T.); +#218840 = VERTEX_POINT('',#218841); +#218841 = CARTESIAN_POINT('',(120.180936,-66.067814,1.585)); +#218842 = LINE('',#218843,#218844); +#218843 = CARTESIAN_POINT('',(120.337464,-66.065412,1.585)); +#218844 = VECTOR('',#218845,1.); +#218845 = DIRECTION('',(-0.999882278647,-1.534369079854E-02,0.)); +#218846 = ORIENTED_EDGE('',*,*,#218847,.T.); +#218847 = EDGE_CURVE('',#218840,#218848,#218850,.T.); +#218848 = VERTEX_POINT('',#218849); +#218849 = CARTESIAN_POINT('',(120.178534,-66.5672,1.585)); +#218850 = LINE('',#218851,#218852); +#218851 = CARTESIAN_POINT('',(120.180936,-66.067814,1.585)); +#218852 = VECTOR('',#218853,1.); +#218853 = DIRECTION('',(-4.809850927157E-03,-0.9999884326,0.)); +#218854 = ORIENTED_EDGE('',*,*,#218855,.T.); +#218855 = EDGE_CURVE('',#218848,#218856,#218858,.T.); +#218856 = VERTEX_POINT('',#218857); +#218857 = CARTESIAN_POINT('',(119.933338,-66.5672,1.585)); +#218858 = CIRCLE('',#218859,0.1249997864); +#218859 = AXIS2_PLACEMENT_3D('',#218860,#218861,#218862); +#218860 = CARTESIAN_POINT('',(120.055936,-66.542814,1.585)); +#218861 = DIRECTION('',(-0.,0.,-1.)); +#218862 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#218863 = ORIENTED_EDGE('',*,*,#218864,.T.); +#218864 = EDGE_CURVE('',#218856,#218865,#218867,.T.); +#218865 = VERTEX_POINT('',#218866); +#218866 = CARTESIAN_POINT('',(119.930936,-66.067814,1.585)); +#218867 = LINE('',#218868,#218869); +#218868 = CARTESIAN_POINT('',(119.933338,-66.5672,1.585)); +#218869 = VECTOR('',#218870,1.); +#218870 = DIRECTION('',(-4.809850927157E-03,0.9999884326,0.)); +#218871 = ORIENTED_EDGE('',*,*,#218872,.T.); +#218872 = EDGE_CURVE('',#218865,#218873,#218875,.T.); +#218873 = VERTEX_POINT('',#218874); +#218874 = CARTESIAN_POINT('',(119.174407,-66.065412,1.585)); +#218875 = LINE('',#218876,#218877); +#218876 = CARTESIAN_POINT('',(119.930936,-66.067814,1.585)); +#218877 = VECTOR('',#218878,1.); +#218878 = DIRECTION('',(-0.99999495964,3.175010995029E-03,0.)); +#218879 = ORIENTED_EDGE('',*,*,#218880,.T.); +#218880 = EDGE_CURVE('',#218873,#218881,#218883,.T.); +#218881 = VERTEX_POINT('',#218882); +#218882 = CARTESIAN_POINT('',(119.077458,-65.915376,1.585)); +#218883 = CIRCLE('',#218884,0.124022803552); +#218884 = AXIS2_PLACEMENT_3D('',#218885,#218886,#218887); +#218885 = CARTESIAN_POINT('',(119.19820467474,-65.94369377425,1.585)); +#218886 = DIRECTION('',(0.,0.,-1.)); +#218887 = DIRECTION('',(-0.191881444891,-0.981418112278,-0.)); +#218888 = ORIENTED_EDGE('',*,*,#218889,.T.); +#218889 = EDGE_CURVE('',#218881,#218890,#218892,.T.); +#218890 = VERTEX_POINT('',#218891); +#218891 = CARTESIAN_POINT('',(119.518769,-64.595197,1.585)); +#218892 = LINE('',#218893,#218894); +#218893 = CARTESIAN_POINT('',(119.077458,-65.915376,1.585)); +#218894 = VECTOR('',#218895,1.); +#218895 = DIRECTION('',(0.317036710261,0.948413266644,0.)); +#218896 = ORIENTED_EDGE('',*,*,#218897,.T.); +#218897 = EDGE_CURVE('',#218890,#218771,#218898,.T.); +#218898 = LINE('',#218899,#218900); +#218899 = CARTESIAN_POINT('',(119.518769,-64.595197,1.585)); +#218900 = VECTOR('',#218901,1.); +#218901 = DIRECTION('',(0.655185752622,0.755467821659,0.)); +#218902 = PLANE('',#218903); +#218903 = AXIS2_PLACEMENT_3D('',#218904,#218905,#218906); +#218904 = CARTESIAN_POINT('',(0.,0.,1.585)); +#218905 = DIRECTION('',(0.,0.,1.)); +#218906 = DIRECTION('',(1.,0.,-0.)); +#218907 = SHELL_BASED_SURFACE_MODEL('',(#218908)); +#218908 = OPEN_SHELL('',(#218909)); +#218909 = ADVANCED_FACE('',(#218910),#219060,.T.); +#218910 = FACE_BOUND('',#218911,.F.); +#218911 = EDGE_LOOP('',(#218912,#218922,#218930,#218938,#218946,#218955, + #218963,#218971,#218980,#218988,#218997,#219005,#219013,#219021, + #219029,#219038,#219046,#219054)); +#218912 = ORIENTED_EDGE('',*,*,#218913,.T.); +#218913 = EDGE_CURVE('',#218914,#218916,#218918,.T.); +#218914 = VERTEX_POINT('',#218915); +#218915 = CARTESIAN_POINT('',(121.338883,-64.654519,1.585)); +#218916 = VERTEX_POINT('',#218917); +#218917 = CARTESIAN_POINT('',(121.379407,-64.627379,1.585)); +#218918 = LINE('',#218919,#218920); +#218919 = CARTESIAN_POINT('',(121.338883,-64.654519,1.585)); +#218920 = VECTOR('',#218921,1.); +#218921 = DIRECTION('',(0.830875014019,0.556459083024,0.)); +#218922 = ORIENTED_EDGE('',*,*,#218923,.T.); +#218923 = EDGE_CURVE('',#218916,#218924,#218926,.T.); +#218924 = VERTEX_POINT('',#218925); +#218925 = CARTESIAN_POINT('',(121.427233,-64.617814,1.585)); +#218926 = LINE('',#218927,#218928); +#218927 = CARTESIAN_POINT('',(121.379407,-64.627379,1.585)); +#218928 = VECTOR('',#218929,1.); +#218929 = DIRECTION('',(0.980581464264,0.196112192232,0.)); +#218930 = ORIENTED_EDGE('',*,*,#218931,.T.); +#218931 = EDGE_CURVE('',#218924,#218932,#218934,.T.); +#218932 = VERTEX_POINT('',#218933); +#218933 = CARTESIAN_POINT('',(121.439375,-64.620216,1.585)); +#218934 = LINE('',#218935,#218936); +#218935 = CARTESIAN_POINT('',(121.427233,-64.617814,1.585)); +#218936 = VECTOR('',#218937,1.); +#218937 = DIRECTION('',(0.980988710835,-0.194064806739,0.)); +#218938 = ORIENTED_EDGE('',*,*,#218939,.T.); +#218939 = EDGE_CURVE('',#218932,#218940,#218942,.T.); +#218940 = VERTEX_POINT('',#218941); +#218941 = CARTESIAN_POINT('',(121.475079,-64.627279,1.585)); +#218942 = LINE('',#218943,#218944); +#218943 = CARTESIAN_POINT('',(121.439375,-64.620216,1.585)); +#218944 = VECTOR('',#218945,1.); +#218945 = DIRECTION('',(0.980989599119,-0.194060316451,0.)); +#218946 = ORIENTED_EDGE('',*,*,#218947,.T.); +#218947 = EDGE_CURVE('',#218940,#218948,#218950,.T.); +#218948 = VERTEX_POINT('',#218949); +#218949 = CARTESIAN_POINT('',(121.552364,-64.742814,1.585)); +#218950 = CIRCLE('',#218951,0.125003327266); +#218951 = AXIS2_PLACEMENT_3D('',#218952,#218953,#218954); +#218952 = CARTESIAN_POINT('',(121.42736067274,-64.74281597707,1.585)); +#218953 = DIRECTION('',(0.,0.,-1.)); +#218954 = DIRECTION('',(0.381736456895,0.924271214242,0.)); +#218955 = ORIENTED_EDGE('',*,*,#218956,.T.); +#218956 = EDGE_CURVE('',#218948,#218957,#218959,.T.); +#218957 = VERTEX_POINT('',#218958); +#218958 = CARTESIAN_POINT('',(121.552364,-66.417814,1.585)); +#218959 = LINE('',#218960,#218961); +#218960 = CARTESIAN_POINT('',(121.552364,-64.742814,1.585)); +#218961 = VECTOR('',#218962,1.); +#218962 = DIRECTION('',(0.,-1.,0.)); +#218963 = ORIENTED_EDGE('',*,*,#218964,.T.); +#218964 = EDGE_CURVE('',#218957,#218965,#218967,.T.); +#218965 = VERTEX_POINT('',#218966); +#218966 = CARTESIAN_POINT('',(121.966036,-66.420216,1.585)); +#218967 = LINE('',#218968,#218969); +#218968 = CARTESIAN_POINT('',(121.552364,-66.417814,1.585)); +#218969 = VECTOR('',#218970,1.); +#218970 = DIRECTION('',(0.999983142515,-5.806434828344E-03,0.)); +#218971 = ORIENTED_EDGE('',*,*,#218972,.T.); +#218972 = EDGE_CURVE('',#218965,#218973,#218975,.T.); +#218973 = VERTEX_POINT('',#218974); +#218974 = CARTESIAN_POINT('',(121.966036,-66.665412,1.585)); +#218975 = CIRCLE('',#218976,0.1249997864); +#218976 = AXIS2_PLACEMENT_3D('',#218977,#218978,#218979); +#218977 = CARTESIAN_POINT('',(121.94165,-66.542814,1.585)); +#218978 = DIRECTION('',(0.,0.,-1.)); +#218979 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#218980 = ORIENTED_EDGE('',*,*,#218981,.T.); +#218981 = EDGE_CURVE('',#218973,#218982,#218984,.T.); +#218982 = VERTEX_POINT('',#218983); +#218983 = CARTESIAN_POINT('',(120.888693,-66.665412,1.585)); +#218984 = LINE('',#218985,#218986); +#218985 = CARTESIAN_POINT('',(121.966036,-66.665412,1.585)); +#218986 = VECTOR('',#218987,1.); +#218987 = DIRECTION('',(-1.,0.,0.)); +#218988 = ORIENTED_EDGE('',*,*,#218989,.T.); +#218989 = EDGE_CURVE('',#218982,#218990,#218992,.T.); +#218990 = VERTEX_POINT('',#218991); +#218991 = CARTESIAN_POINT('',(120.888693,-66.420216,1.585)); +#218992 = CIRCLE('',#218993,0.1249997864); +#218993 = AXIS2_PLACEMENT_3D('',#218994,#218995,#218996); +#218994 = CARTESIAN_POINT('',(120.913079,-66.542814,1.585)); +#218995 = DIRECTION('',(0.,0.,-1.)); +#218996 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#218997 = ORIENTED_EDGE('',*,*,#218998,.T.); +#218998 = EDGE_CURVE('',#218990,#218999,#219001,.T.); +#218999 = VERTEX_POINT('',#219000); +#219000 = CARTESIAN_POINT('',(121.302364,-66.417814,1.585)); +#219001 = LINE('',#219002,#219003); +#219002 = CARTESIAN_POINT('',(120.888693,-66.420216,1.585)); +#219003 = VECTOR('',#219004,1.); +#219004 = DIRECTION('',(0.999983142434,5.806448864231E-03,0.)); +#219005 = ORIENTED_EDGE('',*,*,#219006,.T.); +#219006 = EDGE_CURVE('',#218999,#219007,#219009,.T.); +#219007 = VERTEX_POINT('',#219008); +#219008 = CARTESIAN_POINT('',(121.302364,-65.130305,1.585)); +#219009 = LINE('',#219010,#219011); +#219010 = CARTESIAN_POINT('',(121.302364,-66.417814,1.585)); +#219011 = VECTOR('',#219012,1.); +#219012 = DIRECTION('',(0.,1.,0.)); +#219013 = ORIENTED_EDGE('',*,*,#219014,.T.); +#219014 = EDGE_CURVE('',#219007,#219015,#219017,.T.); +#219015 = VERTEX_POINT('',#219016); +#219016 = CARTESIAN_POINT('',(121.153953,-65.275319,1.585)); +#219017 = LINE('',#219018,#219019); +#219018 = CARTESIAN_POINT('',(121.302364,-65.130305,1.585)); +#219019 = VECTOR('',#219020,1.); +#219020 = DIRECTION('',(-0.715245071663,-0.698873727838,0.)); +#219021 = ORIENTED_EDGE('',*,*,#219022,.T.); +#219022 = EDGE_CURVE('',#219015,#219023,#219025,.T.); +#219023 = VERTEX_POINT('',#219024); +#219024 = CARTESIAN_POINT('',(120.946096,-65.377661,1.585)); +#219025 = LINE('',#219026,#219027); +#219026 = CARTESIAN_POINT('',(121.153953,-65.275319,1.585)); +#219027 = VECTOR('',#219028,1.); +#219028 = DIRECTION('',(-0.897149466573,-0.441727104249,0.)); +#219029 = ORIENTED_EDGE('',*,*,#219030,.T.); +#219030 = EDGE_CURVE('',#219023,#219031,#219033,.T.); +#219031 = VERTEX_POINT('',#219032); +#219032 = CARTESIAN_POINT('',(120.83644,-65.158351,1.585)); +#219033 = CIRCLE('',#219034,0.125000061263); +#219034 = AXIS2_PLACEMENT_3D('',#219035,#219036,#219037); +#219035 = CARTESIAN_POINT('',(120.91307963978,-65.25710008065,1.585)); +#219036 = DIRECTION('',(0.,0.,-1.)); +#219037 = DIRECTION('',(0.26413075229,-0.964486882075,0.)); +#219038 = ORIENTED_EDGE('',*,*,#219039,.T.); +#219039 = EDGE_CURVE('',#219031,#219040,#219042,.T.); +#219040 = VERTEX_POINT('',#219041); +#219041 = CARTESIAN_POINT('',(121.01046,-65.068654,1.585)); +#219042 = LINE('',#219043,#219044); +#219043 = CARTESIAN_POINT('',(120.83644,-65.158351,1.585)); +#219044 = VECTOR('',#219045,1.); +#219045 = DIRECTION('',(0.888869866551,0.458159754166,0.)); +#219046 = ORIENTED_EDGE('',*,*,#219047,.T.); +#219047 = EDGE_CURVE('',#219040,#219048,#219050,.T.); +#219048 = VERTEX_POINT('',#219049); +#219049 = CARTESIAN_POINT('',(121.158798,-64.920317,1.585)); +#219050 = LINE('',#219051,#219052); +#219051 = CARTESIAN_POINT('',(121.01046,-65.068654,1.585)); +#219052 = VECTOR('',#219053,1.); +#219053 = DIRECTION('',(0.707109164622,0.707104397743,0.)); +#219054 = ORIENTED_EDGE('',*,*,#219055,.T.); +#219055 = EDGE_CURVE('',#219048,#218914,#219056,.T.); +#219056 = LINE('',#219057,#219058); +#219057 = CARTESIAN_POINT('',(121.158798,-64.920317,1.585)); +#219058 = VECTOR('',#219059,1.); +#219059 = DIRECTION('',(0.560908542404,0.827877773018,0.)); +#219060 = PLANE('',#219061); +#219061 = AXIS2_PLACEMENT_3D('',#219062,#219063,#219064); +#219062 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219063 = DIRECTION('',(0.,0.,1.)); +#219064 = DIRECTION('',(1.,0.,-0.)); +#219065 = SHELL_BASED_SURFACE_MODEL('',(#219066)); +#219066 = OPEN_SHELL('',(#219067)); +#219067 = ADVANCED_FACE('',(#219068),#219218,.T.); +#219068 = FACE_BOUND('',#219069,.F.); +#219069 = EDGE_LOOP('',(#219070,#219080,#219088,#219096,#219104,#219113, + #219121,#219129,#219138,#219146,#219155,#219163,#219171,#219179, + #219187,#219196,#219204,#219212)); +#219070 = ORIENTED_EDGE('',*,*,#219071,.T.); +#219071 = EDGE_CURVE('',#219072,#219074,#219076,.T.); +#219072 = VERTEX_POINT('',#219073); +#219073 = CARTESIAN_POINT('',(123.053169,-64.654519,1.585)); +#219074 = VERTEX_POINT('',#219075); +#219075 = CARTESIAN_POINT('',(123.093693,-64.627379,1.585)); +#219076 = LINE('',#219077,#219078); +#219077 = CARTESIAN_POINT('',(123.053169,-64.654519,1.585)); +#219078 = VECTOR('',#219079,1.); +#219079 = DIRECTION('',(0.830875014019,0.556459083024,0.)); +#219080 = ORIENTED_EDGE('',*,*,#219081,.T.); +#219081 = EDGE_CURVE('',#219074,#219082,#219084,.T.); +#219082 = VERTEX_POINT('',#219083); +#219083 = CARTESIAN_POINT('',(123.141519,-64.617814,1.585)); +#219084 = LINE('',#219085,#219086); +#219085 = CARTESIAN_POINT('',(123.093693,-64.627379,1.585)); +#219086 = VECTOR('',#219087,1.); +#219087 = DIRECTION('',(0.980581464264,0.196112192232,0.)); +#219088 = ORIENTED_EDGE('',*,*,#219089,.T.); +#219089 = EDGE_CURVE('',#219082,#219090,#219092,.T.); +#219090 = VERTEX_POINT('',#219091); +#219091 = CARTESIAN_POINT('',(123.153661,-64.620216,1.585)); +#219092 = LINE('',#219093,#219094); +#219093 = CARTESIAN_POINT('',(123.141519,-64.617814,1.585)); +#219094 = VECTOR('',#219095,1.); +#219095 = DIRECTION('',(0.980988710835,-0.194064806739,0.)); +#219096 = ORIENTED_EDGE('',*,*,#219097,.T.); +#219097 = EDGE_CURVE('',#219090,#219098,#219100,.T.); +#219098 = VERTEX_POINT('',#219099); +#219099 = CARTESIAN_POINT('',(123.189365,-64.627279,1.585)); +#219100 = LINE('',#219101,#219102); +#219101 = CARTESIAN_POINT('',(123.153661,-64.620216,1.585)); +#219102 = VECTOR('',#219103,1.); +#219103 = DIRECTION('',(0.980989599119,-0.194060316451,0.)); +#219104 = ORIENTED_EDGE('',*,*,#219105,.T.); +#219105 = EDGE_CURVE('',#219098,#219106,#219108,.T.); +#219106 = VERTEX_POINT('',#219107); +#219107 = CARTESIAN_POINT('',(123.26665,-64.742814,1.585)); +#219108 = CIRCLE('',#219109,0.125003327266); +#219109 = AXIS2_PLACEMENT_3D('',#219110,#219111,#219112); +#219110 = CARTESIAN_POINT('',(123.14164667274,-64.74281597707,1.585)); +#219111 = DIRECTION('',(0.,0.,-1.)); +#219112 = DIRECTION('',(0.381736456895,0.924271214242,0.)); +#219113 = ORIENTED_EDGE('',*,*,#219114,.T.); +#219114 = EDGE_CURVE('',#219106,#219115,#219117,.T.); +#219115 = VERTEX_POINT('',#219116); +#219116 = CARTESIAN_POINT('',(123.26665,-66.417814,1.585)); +#219117 = LINE('',#219118,#219119); +#219118 = CARTESIAN_POINT('',(123.26665,-64.742814,1.585)); +#219119 = VECTOR('',#219120,1.); +#219120 = DIRECTION('',(0.,-1.,0.)); +#219121 = ORIENTED_EDGE('',*,*,#219122,.T.); +#219122 = EDGE_CURVE('',#219115,#219123,#219125,.T.); +#219123 = VERTEX_POINT('',#219124); +#219124 = CARTESIAN_POINT('',(123.680322,-66.420216,1.585)); +#219125 = LINE('',#219126,#219127); +#219126 = CARTESIAN_POINT('',(123.26665,-66.417814,1.585)); +#219127 = VECTOR('',#219128,1.); +#219128 = DIRECTION('',(0.999983142515,-5.806434828344E-03,0.)); +#219129 = ORIENTED_EDGE('',*,*,#219130,.T.); +#219130 = EDGE_CURVE('',#219123,#219131,#219133,.T.); +#219131 = VERTEX_POINT('',#219132); +#219132 = CARTESIAN_POINT('',(123.680322,-66.665412,1.585)); +#219133 = CIRCLE('',#219134,0.1249997864); +#219134 = AXIS2_PLACEMENT_3D('',#219135,#219136,#219137); +#219135 = CARTESIAN_POINT('',(123.655936,-66.542814,1.585)); +#219136 = DIRECTION('',(0.,0.,-1.)); +#219137 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219138 = ORIENTED_EDGE('',*,*,#219139,.T.); +#219139 = EDGE_CURVE('',#219131,#219140,#219142,.T.); +#219140 = VERTEX_POINT('',#219141); +#219141 = CARTESIAN_POINT('',(122.602979,-66.665412,1.585)); +#219142 = LINE('',#219143,#219144); +#219143 = CARTESIAN_POINT('',(123.680322,-66.665412,1.585)); +#219144 = VECTOR('',#219145,1.); +#219145 = DIRECTION('',(-1.,0.,0.)); +#219146 = ORIENTED_EDGE('',*,*,#219147,.T.); +#219147 = EDGE_CURVE('',#219140,#219148,#219150,.T.); +#219148 = VERTEX_POINT('',#219149); +#219149 = CARTESIAN_POINT('',(122.602979,-66.420216,1.585)); +#219150 = CIRCLE('',#219151,0.1249997864); +#219151 = AXIS2_PLACEMENT_3D('',#219152,#219153,#219154); +#219152 = CARTESIAN_POINT('',(122.627365,-66.542814,1.585)); +#219153 = DIRECTION('',(0.,0.,-1.)); +#219154 = DIRECTION('',(-0.195088333367,-0.980785675968,-0.)); +#219155 = ORIENTED_EDGE('',*,*,#219156,.T.); +#219156 = EDGE_CURVE('',#219148,#219157,#219159,.T.); +#219157 = VERTEX_POINT('',#219158); +#219158 = CARTESIAN_POINT('',(123.01665,-66.417814,1.585)); +#219159 = LINE('',#219160,#219161); +#219160 = CARTESIAN_POINT('',(122.602979,-66.420216,1.585)); +#219161 = VECTOR('',#219162,1.); +#219162 = DIRECTION('',(0.999983142434,5.806448864231E-03,0.)); +#219163 = ORIENTED_EDGE('',*,*,#219164,.T.); +#219164 = EDGE_CURVE('',#219157,#219165,#219167,.T.); +#219165 = VERTEX_POINT('',#219166); +#219166 = CARTESIAN_POINT('',(123.01665,-65.130305,1.585)); +#219167 = LINE('',#219168,#219169); +#219168 = CARTESIAN_POINT('',(123.01665,-66.417814,1.585)); +#219169 = VECTOR('',#219170,1.); +#219170 = DIRECTION('',(0.,1.,0.)); +#219171 = ORIENTED_EDGE('',*,*,#219172,.T.); +#219172 = EDGE_CURVE('',#219165,#219173,#219175,.T.); +#219173 = VERTEX_POINT('',#219174); +#219174 = CARTESIAN_POINT('',(122.868239,-65.275319,1.585)); +#219175 = LINE('',#219176,#219177); +#219176 = CARTESIAN_POINT('',(123.01665,-65.130305,1.585)); +#219177 = VECTOR('',#219178,1.); +#219178 = DIRECTION('',(-0.715245071663,-0.698873727838,0.)); +#219179 = ORIENTED_EDGE('',*,*,#219180,.T.); +#219180 = EDGE_CURVE('',#219173,#219181,#219183,.T.); +#219181 = VERTEX_POINT('',#219182); +#219182 = CARTESIAN_POINT('',(122.660382,-65.377661,1.585)); +#219183 = LINE('',#219184,#219185); +#219184 = CARTESIAN_POINT('',(122.868239,-65.275319,1.585)); +#219185 = VECTOR('',#219186,1.); +#219186 = DIRECTION('',(-0.897149466573,-0.441727104249,0.)); +#219187 = ORIENTED_EDGE('',*,*,#219188,.T.); +#219188 = EDGE_CURVE('',#219181,#219189,#219191,.T.); +#219189 = VERTEX_POINT('',#219190); +#219190 = CARTESIAN_POINT('',(122.550726,-65.158351,1.585)); +#219191 = CIRCLE('',#219192,0.125000061263); +#219192 = AXIS2_PLACEMENT_3D('',#219193,#219194,#219195); +#219193 = CARTESIAN_POINT('',(122.62736563978,-65.25710008065,1.585)); +#219194 = DIRECTION('',(0.,0.,-1.)); +#219195 = DIRECTION('',(0.26413075229,-0.964486882075,0.)); +#219196 = ORIENTED_EDGE('',*,*,#219197,.T.); +#219197 = EDGE_CURVE('',#219189,#219198,#219200,.T.); +#219198 = VERTEX_POINT('',#219199); +#219199 = CARTESIAN_POINT('',(122.724746,-65.068654,1.585)); +#219200 = LINE('',#219201,#219202); +#219201 = CARTESIAN_POINT('',(122.550726,-65.158351,1.585)); +#219202 = VECTOR('',#219203,1.); +#219203 = DIRECTION('',(0.888869866551,0.458159754166,0.)); +#219204 = ORIENTED_EDGE('',*,*,#219205,.T.); +#219205 = EDGE_CURVE('',#219198,#219206,#219208,.T.); +#219206 = VERTEX_POINT('',#219207); +#219207 = CARTESIAN_POINT('',(122.873084,-64.920317,1.585)); +#219208 = LINE('',#219209,#219210); +#219209 = CARTESIAN_POINT('',(122.724746,-65.068654,1.585)); +#219210 = VECTOR('',#219211,1.); +#219211 = DIRECTION('',(0.707109164622,0.707104397743,0.)); +#219212 = ORIENTED_EDGE('',*,*,#219213,.T.); +#219213 = EDGE_CURVE('',#219206,#219072,#219214,.T.); +#219214 = LINE('',#219215,#219216); +#219215 = CARTESIAN_POINT('',(122.873084,-64.920317,1.585)); +#219216 = VECTOR('',#219217,1.); +#219217 = DIRECTION('',(0.560908542404,0.827877773018,0.)); +#219218 = PLANE('',#219219); +#219219 = AXIS2_PLACEMENT_3D('',#219220,#219221,#219222); +#219220 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219221 = DIRECTION('',(0.,0.,1.)); +#219222 = DIRECTION('',(1.,0.,-0.)); +#219223 = SHELL_BASED_SURFACE_MODEL('',(#219224)); +#219224 = OPEN_SHELL('',(#219225)); +#219225 = ADVANCED_FACE('',(#219226),#219303,.T.); +#219226 = FACE_BOUND('',#219227,.F.); +#219227 = EDGE_LOOP('',(#219228,#219239,#219247,#219255,#219264,#219272, + #219281,#219289,#219297)); +#219228 = ORIENTED_EDGE('',*,*,#219229,.T.); +#219229 = EDGE_CURVE('',#219230,#219232,#219234,.T.); +#219230 = VERTEX_POINT('',#219231); +#219231 = CARTESIAN_POINT('',(127.529348,-64.63888,1.585)); +#219232 = VERTEX_POINT('',#219233); +#219233 = CARTESIAN_POINT('',(127.721392,-64.718428,1.585)); +#219234 = CIRCLE('',#219235,0.124999692383); +#219235 = AXIS2_PLACEMENT_3D('',#219236,#219237,#219238); +#219236 = CARTESIAN_POINT('',(127.598794,-64.74281351807,1.585)); +#219237 = DIRECTION('',(0.,0.,-1.)); +#219238 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219239 = ORIENTED_EDGE('',*,*,#219240,.T.); +#219240 = EDGE_CURVE('',#219232,#219241,#219243,.T.); +#219241 = VERTEX_POINT('',#219242); +#219242 = CARTESIAN_POINT('',(127.723794,-66.417814,1.585)); +#219243 = LINE('',#219244,#219245); +#219244 = CARTESIAN_POINT('',(127.721392,-64.718428,1.585)); +#219245 = VECTOR('',#219246,1.); +#219246 = DIRECTION('',(1.413450270035E-03,-0.999999001079,0.)); +#219247 = ORIENTED_EDGE('',*,*,#219248,.T.); +#219248 = EDGE_CURVE('',#219241,#219249,#219251,.T.); +#219249 = VERTEX_POINT('',#219250); +#219250 = CARTESIAN_POINT('',(128.480323,-66.420216,1.585)); +#219251 = LINE('',#219252,#219253); +#219252 = CARTESIAN_POINT('',(127.723794,-66.417814,1.585)); +#219253 = VECTOR('',#219254,1.); +#219254 = DIRECTION('',(0.99999495964,-3.175010995011E-03,0.)); +#219255 = ORIENTED_EDGE('',*,*,#219256,.T.); +#219256 = EDGE_CURVE('',#219249,#219257,#219259,.T.); +#219257 = VERTEX_POINT('',#219258); +#219258 = CARTESIAN_POINT('',(128.480323,-66.665412,1.585)); +#219259 = CIRCLE('',#219260,0.1249997864); +#219260 = AXIS2_PLACEMENT_3D('',#219261,#219262,#219263); +#219261 = CARTESIAN_POINT('',(128.455937,-66.542814,1.585)); +#219262 = DIRECTION('',(0.,0.,-1.)); +#219263 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219264 = ORIENTED_EDGE('',*,*,#219265,.T.); +#219265 = EDGE_CURVE('',#219257,#219266,#219268,.T.); +#219266 = VERTEX_POINT('',#219267); +#219267 = CARTESIAN_POINT('',(127.574408,-66.665412,1.585)); +#219268 = LINE('',#219269,#219270); +#219269 = CARTESIAN_POINT('',(128.480323,-66.665412,1.585)); +#219270 = VECTOR('',#219271,1.); +#219271 = DIRECTION('',(-1.,0.,0.)); +#219272 = ORIENTED_EDGE('',*,*,#219273,.T.); +#219273 = EDGE_CURVE('',#219266,#219274,#219276,.T.); +#219274 = VERTEX_POINT('',#219275); +#219275 = CARTESIAN_POINT('',(127.476196,-66.5672,1.585)); +#219276 = CIRCLE('',#219277,0.124998078635); +#219277 = AXIS2_PLACEMENT_3D('',#219278,#219279,#219280); +#219278 = CARTESIAN_POINT('',(127.59879254765,-66.54281545234,1.585)); +#219279 = DIRECTION('',(0.,0.,-1.)); +#219280 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#219281 = ORIENTED_EDGE('',*,*,#219282,.T.); +#219282 = EDGE_CURVE('',#219274,#219283,#219285,.T.); +#219283 = VERTEX_POINT('',#219284); +#219284 = CARTESIAN_POINT('',(127.476196,-64.718428,1.585)); +#219285 = LINE('',#219286,#219287); +#219286 = CARTESIAN_POINT('',(127.476196,-66.5672,1.585)); +#219287 = VECTOR('',#219288,1.); +#219288 = DIRECTION('',(0.,1.,0.)); +#219289 = ORIENTED_EDGE('',*,*,#219290,.T.); +#219290 = EDGE_CURVE('',#219283,#219291,#219293,.T.); +#219291 = VERTEX_POINT('',#219292); +#219292 = CARTESIAN_POINT('',(127.49486,-64.673368,1.585)); +#219293 = LINE('',#219294,#219295); +#219294 = CARTESIAN_POINT('',(127.476196,-64.718428,1.585)); +#219295 = VECTOR('',#219296,1.); +#219296 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219297 = ORIENTED_EDGE('',*,*,#219298,.T.); +#219298 = EDGE_CURVE('',#219291,#219230,#219299,.T.); +#219299 = LINE('',#219300,#219301); +#219300 = CARTESIAN_POINT('',(127.49486,-64.673368,1.585)); +#219301 = VECTOR('',#219302,1.); +#219302 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#219303 = PLANE('',#219304); +#219304 = AXIS2_PLACEMENT_3D('',#219305,#219306,#219307); +#219305 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219306 = DIRECTION('',(0.,0.,1.)); +#219307 = DIRECTION('',(1.,0.,-0.)); +#219308 = SHELL_BASED_SURFACE_MODEL('',(#219309)); +#219309 = OPEN_SHELL('',(#219310)); +#219310 = ADVANCED_FACE('',(#219311,#219451),#219503,.T.); +#219311 = FACE_BOUND('',#219312,.F.); +#219312 = EDGE_LOOP('',(#219313,#219324,#219332,#219340,#219348,#219356, + #219364,#219372,#219380,#219388,#219396,#219404,#219412,#219420, + #219428,#219436,#219445)); +#219313 = ORIENTED_EDGE('',*,*,#219314,.T.); +#219314 = EDGE_CURVE('',#219315,#219317,#219319,.T.); +#219315 = VERTEX_POINT('',#219316); +#219316 = CARTESIAN_POINT('',(134.076196,-64.718428,1.585)); +#219317 = VERTEX_POINT('',#219318); +#219318 = CARTESIAN_POINT('',(134.174408,-64.620216,1.585)); +#219319 = CIRCLE('',#219320,0.124998078635); +#219320 = AXIS2_PLACEMENT_3D('',#219321,#219322,#219323); +#219321 = CARTESIAN_POINT('',(134.19879254765,-64.74281254765,1.585)); +#219322 = DIRECTION('',(0.,0.,-1.)); +#219323 = DIRECTION('',(-0.980787456878,0.19507937982,0.)); +#219324 = ORIENTED_EDGE('',*,*,#219325,.T.); +#219325 = EDGE_CURVE('',#219317,#219326,#219328,.T.); +#219326 = VERTEX_POINT('',#219327); +#219327 = CARTESIAN_POINT('',(134.908894,-64.620216,1.585)); +#219328 = LINE('',#219329,#219330); +#219329 = CARTESIAN_POINT('',(134.174408,-64.620216,1.585)); +#219330 = VECTOR('',#219331,1.); +#219331 = DIRECTION('',(1.,0.,0.)); +#219332 = ORIENTED_EDGE('',*,*,#219333,.T.); +#219333 = EDGE_CURVE('',#219326,#219334,#219336,.T.); +#219334 = VERTEX_POINT('',#219335); +#219335 = CARTESIAN_POINT('',(134.940409,-64.63101,1.585)); +#219336 = LINE('',#219337,#219338); +#219337 = CARTESIAN_POINT('',(134.908894,-64.620216,1.585)); +#219338 = VECTOR('',#219339,1.); +#219339 = DIRECTION('',(0.946048520127,-0.32402499528,0.)); +#219340 = ORIENTED_EDGE('',*,*,#219341,.T.); +#219341 = EDGE_CURVE('',#219334,#219342,#219344,.T.); +#219342 = VERTEX_POINT('',#219343); +#219343 = CARTESIAN_POINT('',(135.132576,-64.729778,1.585)); +#219344 = LINE('',#219345,#219346); +#219345 = CARTESIAN_POINT('',(134.940409,-64.63101,1.585)); +#219346 = VECTOR('',#219347,1.); +#219347 = DIRECTION('',(0.889402115976,-0.45712566773,0.)); +#219348 = ORIENTED_EDGE('',*,*,#219349,.T.); +#219349 = EDGE_CURVE('',#219342,#219350,#219352,.T.); +#219350 = VERTEX_POINT('',#219351); +#219351 = CARTESIAN_POINT('',(135.245584,-64.844796,1.585)); +#219352 = LINE('',#219353,#219354); +#219353 = CARTESIAN_POINT('',(135.132576,-64.729778,1.585)); +#219354 = VECTOR('',#219355,1.); +#219355 = DIRECTION('',(0.70084655994,-0.713312063139,0.)); +#219356 = ORIENTED_EDGE('',*,*,#219357,.T.); +#219357 = EDGE_CURVE('',#219350,#219358,#219360,.T.); +#219358 = VERTEX_POINT('',#219359); +#219359 = CARTESIAN_POINT('',(135.347926,-65.052655,1.585)); +#219360 = LINE('',#219361,#219362); +#219361 = CARTESIAN_POINT('',(135.245584,-64.844796,1.585)); +#219362 = VECTOR('',#219363,1.); +#219363 = DIRECTION('',(0.441723683305,-0.897151150926,0.)); +#219364 = ORIENTED_EDGE('',*,*,#219365,.T.); +#219365 = EDGE_CURVE('',#219358,#219366,#219368,.T.); +#219366 = VERTEX_POINT('',#219367); +#219367 = CARTESIAN_POINT('',(135.352365,-65.085671,1.585)); +#219368 = LINE('',#219369,#219370); +#219369 = CARTESIAN_POINT('',(135.347926,-65.052655,1.585)); +#219370 = VECTOR('',#219371,1.); +#219371 = DIRECTION('',(0.133250982622,-0.991082325355,0.)); +#219372 = ORIENTED_EDGE('',*,*,#219373,.T.); +#219373 = EDGE_CURVE('',#219366,#219374,#219376,.T.); +#219374 = VERTEX_POINT('',#219375); +#219375 = CARTESIAN_POINT('',(135.349963,-65.3672,1.585)); +#219376 = LINE('',#219377,#219378); +#219377 = CARTESIAN_POINT('',(135.352365,-65.085671,1.585)); +#219378 = VECTOR('',#219379,1.); +#219379 = DIRECTION('',(-8.531670195019E-03,-0.99996360464,0.)); +#219380 = ORIENTED_EDGE('',*,*,#219381,.T.); +#219381 = EDGE_CURVE('',#219374,#219382,#219384,.T.); +#219382 = VERTEX_POINT('',#219383); +#219383 = CARTESIAN_POINT('',(135.339168,-65.398716,1.585)); +#219384 = LINE('',#219385,#219386); +#219385 = CARTESIAN_POINT('',(135.349963,-65.3672,1.585)); +#219386 = VECTOR('',#219387,1.); +#219387 = DIRECTION('',(-0.324042659659,-0.94604246983,0.)); +#219388 = ORIENTED_EDGE('',*,*,#219389,.T.); +#219389 = EDGE_CURVE('',#219382,#219390,#219392,.T.); +#219390 = VERTEX_POINT('',#219391); +#219391 = CARTESIAN_POINT('',(135.2404,-65.590881,1.585)); +#219392 = LINE('',#219393,#219394); +#219393 = CARTESIAN_POINT('',(135.339168,-65.398716,1.585)); +#219394 = VECTOR('',#219395,1.); +#219395 = DIRECTION('',(-0.457129431181,-0.889400181666,0.)); +#219396 = ORIENTED_EDGE('',*,*,#219397,.T.); +#219397 = EDGE_CURVE('',#219390,#219398,#219400,.T.); +#219398 = VERTEX_POINT('',#219399); +#219399 = CARTESIAN_POINT('',(135.125384,-65.70389,1.585)); +#219400 = LINE('',#219401,#219402); +#219401 = CARTESIAN_POINT('',(135.2404,-65.590881,1.585)); +#219402 = VECTOR('',#219403,1.); +#219403 = DIRECTION('',(-0.713302870229,-0.700855916236,0.)); +#219404 = ORIENTED_EDGE('',*,*,#219405,.T.); +#219405 = EDGE_CURVE('',#219398,#219406,#219408,.T.); +#219406 = VERTEX_POINT('',#219407); +#219407 = CARTESIAN_POINT('',(134.917524,-65.806232,1.585)); +#219408 = LINE('',#219409,#219410); +#219409 = CARTESIAN_POINT('',(135.125384,-65.70389,1.585)); +#219410 = VECTOR('',#219411,1.); +#219411 = DIRECTION('',(-0.897151993088,-0.44172197285,0.)); +#219412 = ORIENTED_EDGE('',*,*,#219413,.T.); +#219413 = EDGE_CURVE('',#219406,#219414,#219416,.T.); +#219414 = VERTEX_POINT('',#219415); +#219415 = CARTESIAN_POINT('',(134.884508,-65.810671,1.585)); +#219416 = LINE('',#219417,#219418); +#219417 = CARTESIAN_POINT('',(134.917524,-65.806232,1.585)); +#219418 = VECTOR('',#219419,1.); +#219419 = DIRECTION('',(-0.991082325355,-0.133250982622,0.)); +#219420 = ORIENTED_EDGE('',*,*,#219421,.T.); +#219421 = EDGE_CURVE('',#219414,#219422,#219424,.T.); +#219422 = VERTEX_POINT('',#219423); +#219423 = CARTESIAN_POINT('',(134.323794,-65.810671,1.585)); +#219424 = LINE('',#219425,#219426); +#219425 = CARTESIAN_POINT('',(134.884508,-65.810671,1.585)); +#219426 = VECTOR('',#219427,1.); +#219427 = DIRECTION('',(-1.,0.,0.)); +#219428 = ORIENTED_EDGE('',*,*,#219429,.T.); +#219429 = EDGE_CURVE('',#219422,#219430,#219432,.T.); +#219430 = VERTEX_POINT('',#219431); +#219431 = CARTESIAN_POINT('',(134.321392,-66.5672,1.585)); +#219432 = LINE('',#219433,#219434); +#219433 = CARTESIAN_POINT('',(134.323794,-65.810671,1.585)); +#219434 = VECTOR('',#219435,1.); +#219435 = DIRECTION('',(-3.175010995011E-03,-0.99999495964,0.)); +#219436 = ORIENTED_EDGE('',*,*,#219437,.T.); +#219437 = EDGE_CURVE('',#219430,#219438,#219440,.T.); +#219438 = VERTEX_POINT('',#219439); +#219439 = CARTESIAN_POINT('',(134.076196,-66.5672,1.585)); +#219440 = CIRCLE('',#219441,0.1249997864); +#219441 = AXIS2_PLACEMENT_3D('',#219442,#219443,#219444); +#219442 = CARTESIAN_POINT('',(134.198794,-66.542814,1.585)); +#219443 = DIRECTION('',(-0.,0.,-1.)); +#219444 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#219445 = ORIENTED_EDGE('',*,*,#219446,.T.); +#219446 = EDGE_CURVE('',#219438,#219315,#219447,.T.); +#219447 = LINE('',#219448,#219449); +#219448 = CARTESIAN_POINT('',(134.076196,-66.5672,1.585)); +#219449 = VECTOR('',#219450,1.); +#219450 = DIRECTION('',(0.,1.,0.)); +#219451 = FACE_BOUND('',#219452,.F.); +#219452 = EDGE_LOOP('',(#219453,#219464,#219472,#219480,#219488,#219497) + ); +#219453 = ORIENTED_EDGE('',*,*,#219454,.T.); +#219454 = EDGE_CURVE('',#219455,#219457,#219459,.T.); +#219455 = VERTEX_POINT('',#219456); +#219456 = CARTESIAN_POINT('',(135.102365,-65.115179,1.585)); +#219457 = VERTEX_POINT('',#219458); +#219458 = CARTESIAN_POINT('',(134.854999,-64.867814,1.585)); +#219459 = CIRCLE('',#219460,0.347631916063); +#219460 = AXIS2_PLACEMENT_3D('',#219461,#219462,#219463); +#219461 = CARTESIAN_POINT('',(134.76625231879,-65.20392703997,1.585)); +#219462 = DIRECTION('',(0.,0.,1.)); +#219463 = DIRECTION('',(0.96686370173,0.2552931301,-0.)); +#219464 = ORIENTED_EDGE('',*,*,#219465,.T.); +#219465 = EDGE_CURVE('',#219457,#219466,#219468,.T.); +#219466 = VERTEX_POINT('',#219467); +#219467 = CARTESIAN_POINT('',(134.323794,-64.867814,1.585)); +#219468 = LINE('',#219469,#219470); +#219469 = CARTESIAN_POINT('',(134.854999,-64.867814,1.585)); +#219470 = VECTOR('',#219471,1.); +#219471 = DIRECTION('',(-1.,0.,0.)); +#219472 = ORIENTED_EDGE('',*,*,#219473,.T.); +#219473 = EDGE_CURVE('',#219466,#219474,#219476,.T.); +#219474 = VERTEX_POINT('',#219475); +#219475 = CARTESIAN_POINT('',(134.323794,-65.560671,1.585)); +#219476 = LINE('',#219477,#219478); +#219477 = CARTESIAN_POINT('',(134.323794,-64.867814,1.585)); +#219478 = VECTOR('',#219479,1.); +#219479 = DIRECTION('',(0.,-1.,0.)); +#219480 = ORIENTED_EDGE('',*,*,#219481,.T.); +#219481 = EDGE_CURVE('',#219474,#219482,#219484,.T.); +#219482 = VERTEX_POINT('',#219483); +#219483 = CARTESIAN_POINT('',(134.854999,-65.560671,1.585)); +#219484 = LINE('',#219485,#219486); +#219485 = CARTESIAN_POINT('',(134.323794,-65.560671,1.585)); +#219486 = VECTOR('',#219487,1.); +#219487 = DIRECTION('',(1.,0.,0.)); +#219488 = ORIENTED_EDGE('',*,*,#219489,.T.); +#219489 = EDGE_CURVE('',#219482,#219490,#219492,.T.); +#219490 = VERTEX_POINT('',#219491); +#219491 = CARTESIAN_POINT('',(135.102365,-65.313305,1.585)); +#219492 = CIRCLE('',#219493,0.347641001424); +#219493 = AXIS2_PLACEMENT_3D('',#219494,#219495,#219496); +#219494 = CARTESIAN_POINT('',(134.76624460111,-65.22455060111,1.585)); +#219495 = DIRECTION('',(0.,0.,1.)); +#219496 = DIRECTION('',(0.2553047498,-0.966860633561,0.)); +#219497 = ORIENTED_EDGE('',*,*,#219498,.T.); +#219498 = EDGE_CURVE('',#219490,#219455,#219499,.T.); +#219499 = LINE('',#219500,#219501); +#219500 = CARTESIAN_POINT('',(135.102365,-65.313305,1.585)); +#219501 = VECTOR('',#219502,1.); +#219502 = DIRECTION('',(0.,1.,0.)); +#219503 = PLANE('',#219504); +#219504 = AXIS2_PLACEMENT_3D('',#219505,#219506,#219507); +#219505 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219506 = DIRECTION('',(0.,0.,1.)); +#219507 = DIRECTION('',(1.,0.,-0.)); +#219508 = SHELL_BASED_SURFACE_MODEL('',(#219509)); +#219509 = OPEN_SHELL('',(#219510)); +#219510 = ADVANCED_FACE('',(#219511),#219563,.T.); +#219511 = FACE_BOUND('',#219512,.F.); +#219512 = EDGE_LOOP('',(#219513,#219524,#219532,#219541,#219549,#219557) + ); +#219513 = ORIENTED_EDGE('',*,*,#219514,.T.); +#219514 = EDGE_CURVE('',#219515,#219517,#219519,.T.); +#219515 = VERTEX_POINT('',#219516); +#219516 = CARTESIAN_POINT('',(135.929348,-64.63888,1.585)); +#219517 = VERTEX_POINT('',#219518); +#219518 = CARTESIAN_POINT('',(136.121392,-64.718428,1.585)); +#219519 = CIRCLE('',#219520,0.124999692383); +#219520 = AXIS2_PLACEMENT_3D('',#219521,#219522,#219523); +#219521 = CARTESIAN_POINT('',(135.998794,-64.74281351807,1.585)); +#219522 = DIRECTION('',(0.,0.,-1.)); +#219523 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219524 = ORIENTED_EDGE('',*,*,#219525,.T.); +#219525 = EDGE_CURVE('',#219517,#219526,#219528,.T.); +#219526 = VERTEX_POINT('',#219527); +#219527 = CARTESIAN_POINT('',(136.121392,-66.5672,1.585)); +#219528 = LINE('',#219529,#219530); +#219529 = CARTESIAN_POINT('',(136.121392,-64.718428,1.585)); +#219530 = VECTOR('',#219531,1.); +#219531 = DIRECTION('',(0.,-1.,0.)); +#219532 = ORIENTED_EDGE('',*,*,#219533,.T.); +#219533 = EDGE_CURVE('',#219526,#219534,#219536,.T.); +#219534 = VERTEX_POINT('',#219535); +#219535 = CARTESIAN_POINT('',(135.876196,-66.5672,1.585)); +#219536 = CIRCLE('',#219537,0.1249997864); +#219537 = AXIS2_PLACEMENT_3D('',#219538,#219539,#219540); +#219538 = CARTESIAN_POINT('',(135.998794,-66.542814,1.585)); +#219539 = DIRECTION('',(-0.,0.,-1.)); +#219540 = DIRECTION('',(0.980785675968,-0.195088333367,-0.)); +#219541 = ORIENTED_EDGE('',*,*,#219542,.T.); +#219542 = EDGE_CURVE('',#219534,#219543,#219545,.T.); +#219543 = VERTEX_POINT('',#219544); +#219544 = CARTESIAN_POINT('',(135.876196,-64.718428,1.585)); +#219545 = LINE('',#219546,#219547); +#219546 = CARTESIAN_POINT('',(135.876196,-66.5672,1.585)); +#219547 = VECTOR('',#219548,1.); +#219548 = DIRECTION('',(0.,1.,0.)); +#219549 = ORIENTED_EDGE('',*,*,#219550,.T.); +#219550 = EDGE_CURVE('',#219543,#219551,#219553,.T.); +#219551 = VERTEX_POINT('',#219552); +#219552 = CARTESIAN_POINT('',(135.89486,-64.673368,1.585)); +#219553 = LINE('',#219554,#219555); +#219554 = CARTESIAN_POINT('',(135.876196,-64.718428,1.585)); +#219555 = VECTOR('',#219556,1.); +#219556 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219557 = ORIENTED_EDGE('',*,*,#219558,.T.); +#219558 = EDGE_CURVE('',#219551,#219515,#219559,.T.); +#219559 = LINE('',#219560,#219561); +#219560 = CARTESIAN_POINT('',(135.89486,-64.673368,1.585)); +#219561 = VECTOR('',#219562,1.); +#219562 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#219563 = PLANE('',#219564); +#219564 = AXIS2_PLACEMENT_3D('',#219565,#219566,#219567); +#219565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219566 = DIRECTION('',(0.,0.,1.)); +#219567 = DIRECTION('',(1.,0.,-0.)); +#219568 = SHELL_BASED_SURFACE_MODEL('',(#219569)); +#219569 = OPEN_SHELL('',(#219570)); +#219570 = ADVANCED_FACE('',(#219571),#219648,.T.); +#219571 = FACE_BOUND('',#219572,.F.); +#219572 = EDGE_LOOP('',(#219573,#219584,#219592,#219600,#219609,#219617, + #219626,#219634,#219642)); +#219573 = ORIENTED_EDGE('',*,*,#219574,.T.); +#219574 = EDGE_CURVE('',#219575,#219577,#219579,.T.); +#219575 = VERTEX_POINT('',#219576); +#219576 = CARTESIAN_POINT('',(136.786491,-64.63888,1.585)); +#219577 = VERTEX_POINT('',#219578); +#219578 = CARTESIAN_POINT('',(136.978535,-64.718428,1.585)); +#219579 = CIRCLE('',#219580,0.124999692383); +#219580 = AXIS2_PLACEMENT_3D('',#219581,#219582,#219583); +#219581 = CARTESIAN_POINT('',(136.855937,-64.74281351807,1.585)); +#219582 = DIRECTION('',(0.,0.,-1.)); +#219583 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219584 = ORIENTED_EDGE('',*,*,#219585,.T.); +#219585 = EDGE_CURVE('',#219577,#219586,#219588,.T.); +#219586 = VERTEX_POINT('',#219587); +#219587 = CARTESIAN_POINT('',(136.980937,-66.417814,1.585)); +#219588 = LINE('',#219589,#219590); +#219589 = CARTESIAN_POINT('',(136.978535,-64.718428,1.585)); +#219590 = VECTOR('',#219591,1.); +#219591 = DIRECTION('',(1.413450270044E-03,-0.999999001079,0.)); +#219592 = ORIENTED_EDGE('',*,*,#219593,.T.); +#219593 = EDGE_CURVE('',#219586,#219594,#219596,.T.); +#219594 = VERTEX_POINT('',#219595); +#219595 = CARTESIAN_POINT('',(137.737466,-66.420216,1.585)); +#219596 = LINE('',#219597,#219598); +#219597 = CARTESIAN_POINT('',(136.980937,-66.417814,1.585)); +#219598 = VECTOR('',#219599,1.); +#219599 = DIRECTION('',(0.99999495964,-3.175010995011E-03,0.)); +#219600 = ORIENTED_EDGE('',*,*,#219601,.T.); +#219601 = EDGE_CURVE('',#219594,#219602,#219604,.T.); +#219602 = VERTEX_POINT('',#219603); +#219603 = CARTESIAN_POINT('',(137.737466,-66.665412,1.585)); +#219604 = CIRCLE('',#219605,0.1249997864); +#219605 = AXIS2_PLACEMENT_3D('',#219606,#219607,#219608); +#219606 = CARTESIAN_POINT('',(137.71308,-66.542814,1.585)); +#219607 = DIRECTION('',(0.,0.,-1.)); +#219608 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219609 = ORIENTED_EDGE('',*,*,#219610,.T.); +#219610 = EDGE_CURVE('',#219602,#219611,#219613,.T.); +#219611 = VERTEX_POINT('',#219612); +#219612 = CARTESIAN_POINT('',(136.831551,-66.665412,1.585)); +#219613 = LINE('',#219614,#219615); +#219614 = CARTESIAN_POINT('',(137.737466,-66.665412,1.585)); +#219615 = VECTOR('',#219616,1.); +#219616 = DIRECTION('',(-1.,0.,0.)); +#219617 = ORIENTED_EDGE('',*,*,#219618,.T.); +#219618 = EDGE_CURVE('',#219611,#219619,#219621,.T.); +#219619 = VERTEX_POINT('',#219620); +#219620 = CARTESIAN_POINT('',(136.733339,-66.5672,1.585)); +#219621 = CIRCLE('',#219622,0.124998078635); +#219622 = AXIS2_PLACEMENT_3D('',#219623,#219624,#219625); +#219623 = CARTESIAN_POINT('',(136.85593554765,-66.54281545234,1.585)); +#219624 = DIRECTION('',(0.,0.,-1.)); +#219625 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#219626 = ORIENTED_EDGE('',*,*,#219627,.T.); +#219627 = EDGE_CURVE('',#219619,#219628,#219630,.T.); +#219628 = VERTEX_POINT('',#219629); +#219629 = CARTESIAN_POINT('',(136.733339,-64.718428,1.585)); +#219630 = LINE('',#219631,#219632); +#219631 = CARTESIAN_POINT('',(136.733339,-66.5672,1.585)); +#219632 = VECTOR('',#219633,1.); +#219633 = DIRECTION('',(0.,1.,0.)); +#219634 = ORIENTED_EDGE('',*,*,#219635,.T.); +#219635 = EDGE_CURVE('',#219628,#219636,#219638,.T.); +#219636 = VERTEX_POINT('',#219637); +#219637 = CARTESIAN_POINT('',(136.752003,-64.673368,1.585)); +#219638 = LINE('',#219639,#219640); +#219639 = CARTESIAN_POINT('',(136.733339,-64.718428,1.585)); +#219640 = VECTOR('',#219641,1.); +#219641 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219642 = ORIENTED_EDGE('',*,*,#219643,.T.); +#219643 = EDGE_CURVE('',#219636,#219575,#219644,.T.); +#219644 = LINE('',#219645,#219646); +#219645 = CARTESIAN_POINT('',(136.752003,-64.673368,1.585)); +#219646 = VECTOR('',#219647,1.); +#219647 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#219648 = PLANE('',#219649); +#219649 = AXIS2_PLACEMENT_3D('',#219650,#219651,#219652); +#219650 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219651 = DIRECTION('',(0.,0.,1.)); +#219652 = DIRECTION('',(1.,0.,-0.)); +#219653 = SHELL_BASED_SURFACE_MODEL('',(#219654)); +#219654 = OPEN_SHELL('',(#219655)); +#219655 = ADVANCED_FACE('',(#219656),#219733,.T.); +#219656 = FACE_BOUND('',#219657,.F.); +#219657 = EDGE_LOOP('',(#219658,#219669,#219677,#219685,#219694,#219702, + #219711,#219719,#219727)); +#219658 = ORIENTED_EDGE('',*,*,#219659,.T.); +#219659 = EDGE_CURVE('',#219660,#219662,#219664,.T.); +#219660 = VERTEX_POINT('',#219661); +#219661 = CARTESIAN_POINT('',(138.243634,-64.63888,1.585)); +#219662 = VERTEX_POINT('',#219663); +#219663 = CARTESIAN_POINT('',(138.435678,-64.718428,1.585)); +#219664 = CIRCLE('',#219665,0.124999692383); +#219665 = AXIS2_PLACEMENT_3D('',#219666,#219667,#219668); +#219666 = CARTESIAN_POINT('',(138.31308,-64.74281351807,1.585)); +#219667 = DIRECTION('',(0.,0.,-1.)); +#219668 = DIRECTION('',(-0.55556936722,0.831470190811,0.)); +#219669 = ORIENTED_EDGE('',*,*,#219670,.T.); +#219670 = EDGE_CURVE('',#219662,#219671,#219673,.T.); +#219671 = VERTEX_POINT('',#219672); +#219672 = CARTESIAN_POINT('',(138.43808,-66.417814,1.585)); +#219673 = LINE('',#219674,#219675); +#219674 = CARTESIAN_POINT('',(138.435678,-64.718428,1.585)); +#219675 = VECTOR('',#219676,1.); +#219676 = DIRECTION('',(1.413450270044E-03,-0.999999001079,0.)); +#219677 = ORIENTED_EDGE('',*,*,#219678,.T.); +#219678 = EDGE_CURVE('',#219671,#219679,#219681,.T.); +#219679 = VERTEX_POINT('',#219680); +#219680 = CARTESIAN_POINT('',(139.194609,-66.420216,1.585)); +#219681 = LINE('',#219682,#219683); +#219682 = CARTESIAN_POINT('',(138.43808,-66.417814,1.585)); +#219683 = VECTOR('',#219684,1.); +#219684 = DIRECTION('',(0.99999495964,-3.175010995011E-03,0.)); +#219685 = ORIENTED_EDGE('',*,*,#219686,.T.); +#219686 = EDGE_CURVE('',#219679,#219687,#219689,.T.); +#219687 = VERTEX_POINT('',#219688); +#219688 = CARTESIAN_POINT('',(139.194609,-66.665412,1.585)); +#219689 = CIRCLE('',#219690,0.1249997864); +#219690 = AXIS2_PLACEMENT_3D('',#219691,#219692,#219693); +#219691 = CARTESIAN_POINT('',(139.170223,-66.542814,1.585)); +#219692 = DIRECTION('',(0.,0.,-1.)); +#219693 = DIRECTION('',(0.195088333367,0.980785675968,0.)); +#219694 = ORIENTED_EDGE('',*,*,#219695,.T.); +#219695 = EDGE_CURVE('',#219687,#219696,#219698,.T.); +#219696 = VERTEX_POINT('',#219697); +#219697 = CARTESIAN_POINT('',(138.288694,-66.665412,1.585)); +#219698 = LINE('',#219699,#219700); +#219699 = CARTESIAN_POINT('',(139.194609,-66.665412,1.585)); +#219700 = VECTOR('',#219701,1.); +#219701 = DIRECTION('',(-1.,0.,0.)); +#219702 = ORIENTED_EDGE('',*,*,#219703,.T.); +#219703 = EDGE_CURVE('',#219696,#219704,#219706,.T.); +#219704 = VERTEX_POINT('',#219705); +#219705 = CARTESIAN_POINT('',(138.190482,-66.5672,1.585)); +#219706 = CIRCLE('',#219707,0.124998078635); +#219707 = AXIS2_PLACEMENT_3D('',#219708,#219709,#219710); +#219708 = CARTESIAN_POINT('',(138.31307854765,-66.54281545234,1.585)); +#219709 = DIRECTION('',(0.,0.,-1.)); +#219710 = DIRECTION('',(-0.19507937982,-0.980787456878,-0.)); +#219711 = ORIENTED_EDGE('',*,*,#219712,.T.); +#219712 = EDGE_CURVE('',#219704,#219713,#219715,.T.); +#219713 = VERTEX_POINT('',#219714); +#219714 = CARTESIAN_POINT('',(138.190482,-64.718428,1.585)); +#219715 = LINE('',#219716,#219717); +#219716 = CARTESIAN_POINT('',(138.190482,-66.5672,1.585)); +#219717 = VECTOR('',#219718,1.); +#219718 = DIRECTION('',(0.,1.,0.)); +#219719 = ORIENTED_EDGE('',*,*,#219720,.T.); +#219720 = EDGE_CURVE('',#219713,#219721,#219723,.T.); +#219721 = VERTEX_POINT('',#219722); +#219722 = CARTESIAN_POINT('',(138.209146,-64.673368,1.585)); +#219723 = LINE('',#219724,#219725); +#219724 = CARTESIAN_POINT('',(138.190482,-64.718428,1.585)); +#219725 = VECTOR('',#219726,1.); +#219726 = DIRECTION('',(0.382675327398,0.923882889657,0.)); +#219727 = ORIENTED_EDGE('',*,*,#219728,.T.); +#219728 = EDGE_CURVE('',#219721,#219660,#219729,.T.); +#219729 = LINE('',#219730,#219731); +#219730 = CARTESIAN_POINT('',(138.209146,-64.673368,1.585)); +#219731 = VECTOR('',#219732,1.); +#219732 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#219733 = PLANE('',#219734); +#219734 = AXIS2_PLACEMENT_3D('',#219735,#219736,#219737); +#219735 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219736 = DIRECTION('',(0.,0.,1.)); +#219737 = DIRECTION('',(1.,0.,-0.)); +#219738 = SHELL_BASED_SURFACE_MODEL('',(#219739)); +#219739 = OPEN_SHELL('',(#219740)); +#219740 = ADVANCED_FACE('',(#219741,#219858),#219941,.T.); +#219741 = FACE_BOUND('',#219742,.F.); +#219742 = EDGE_LOOP('',(#219743,#219754,#219762,#219770,#219778,#219786, + #219795,#219803,#219811,#219819,#219828,#219836,#219844,#219852)); +#219743 = ORIENTED_EDGE('',*,*,#219744,.T.); +#219744 = EDGE_CURVE('',#219745,#219747,#219749,.T.); +#219745 = VERTEX_POINT('',#219746); +#219746 = CARTESIAN_POINT('',(170.535199,-65.450458,1.585)); +#219747 = VERTEX_POINT('',#219748); +#219748 = CARTESIAN_POINT('',(171.098513,-65.455824,1.585)); +#219749 = CIRCLE('',#219750,0.504047013411); +#219750 = AXIS2_PLACEMENT_3D('',#219751,#219752,#219753); +#219751 = CARTESIAN_POINT('',(170.81287439108,-65.87112386374,1.585)); +#219752 = DIRECTION('',(0.,0.,-1.)); +#219753 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#219754 = ORIENTED_EDGE('',*,*,#219755,.T.); +#219755 = EDGE_CURVE('',#219747,#219756,#219758,.T.); +#219756 = VERTEX_POINT('',#219757); +#219757 = CARTESIAN_POINT('',(171.161967,-65.521354,1.585)); +#219758 = LINE('',#219759,#219760); +#219759 = CARTESIAN_POINT('',(171.098513,-65.455824,1.585)); +#219760 = VECTOR('',#219761,1.); +#219761 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#219762 = ORIENTED_EDGE('',*,*,#219763,.T.); +#219763 = EDGE_CURVE('',#219756,#219764,#219766,.T.); +#219764 = VERTEX_POINT('',#219765); +#219765 = CARTESIAN_POINT('',(171.220028,-65.641801,1.585)); +#219766 = LINE('',#219767,#219768); +#219767 = CARTESIAN_POINT('',(171.161967,-65.521354,1.585)); +#219768 = VECTOR('',#219769,1.); +#219769 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#219770 = ORIENTED_EDGE('',*,*,#219771,.T.); +#219771 = EDGE_CURVE('',#219764,#219772,#219774,.T.); +#219772 = VERTEX_POINT('',#219773); +#219773 = CARTESIAN_POINT('',(171.218806,-65.866719,1.585)); +#219774 = LINE('',#219775,#219776); +#219775 = CARTESIAN_POINT('',(171.220028,-65.641801,1.585)); +#219776 = VECTOR('',#219777,1.); +#219777 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#219778 = ORIENTED_EDGE('',*,*,#219779,.T.); +#219779 = EDGE_CURVE('',#219772,#219780,#219782,.T.); +#219780 = VERTEX_POINT('',#219781); +#219781 = CARTESIAN_POINT('',(171.2053,-65.89695,1.585)); +#219782 = LINE('',#219783,#219784); +#219783 = CARTESIAN_POINT('',(171.218806,-65.866719,1.585)); +#219784 = VECTOR('',#219785,1.); +#219785 = DIRECTION('',(-0.407903101909,-0.913025223886,0.)); +#219786 = ORIENTED_EDGE('',*,*,#219787,.T.); +#219787 = EDGE_CURVE('',#219780,#219788,#219790,.T.); +#219788 = VERTEX_POINT('',#219789); +#219789 = CARTESIAN_POINT('',(171.208829,-65.983815,1.585)); +#219790 = CIRCLE('',#219791,7.226603459189E-02); +#219791 = AXIS2_PLACEMENT_3D('',#219792,#219793,#219794); +#219792 = CARTESIAN_POINT('',(171.149380946,-65.94272596701,1.585)); +#219793 = DIRECTION('',(0.,0.,-1.)); +#219794 = DIRECTION('',(0.773794415465,0.633436818156,0.)); +#219795 = ORIENTED_EDGE('',*,*,#219796,.T.); +#219796 = EDGE_CURVE('',#219788,#219797,#219799,.T.); +#219797 = VERTEX_POINT('',#219798); +#219798 = CARTESIAN_POINT('',(171.188137,-66.004507,1.585)); +#219799 = LINE('',#219800,#219801); +#219800 = CARTESIAN_POINT('',(171.208829,-65.983815,1.585)); +#219801 = VECTOR('',#219802,1.); +#219802 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#219803 = ORIENTED_EDGE('',*,*,#219804,.T.); +#219804 = EDGE_CURVE('',#219797,#219805,#219807,.T.); +#219805 = VERTEX_POINT('',#219806); +#219806 = CARTESIAN_POINT('',(171.146469,-66.017147,1.585)); +#219807 = LINE('',#219808,#219809); +#219808 = CARTESIAN_POINT('',(171.188137,-66.004507,1.585)); +#219809 = VECTOR('',#219810,1.); +#219810 = DIRECTION('',(-0.956939376321,-0.29028783999,0.)); +#219811 = ORIENTED_EDGE('',*,*,#219812,.T.); +#219812 = EDGE_CURVE('',#219805,#219813,#219815,.T.); +#219813 = VERTEX_POINT('',#219814); +#219814 = CARTESIAN_POINT('',(170.131837,-66.015706,1.585)); +#219815 = LINE('',#219816,#219817); +#219816 = CARTESIAN_POINT('',(171.146469,-66.017147,1.585)); +#219817 = VECTOR('',#219818,1.); +#219818 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#219819 = ORIENTED_EDGE('',*,*,#219820,.T.); +#219820 = EDGE_CURVE('',#219813,#219821,#219823,.T.); +#219821 = VERTEX_POINT('',#219822); +#219822 = CARTESIAN_POINT('',(170.146469,-65.867147,1.585)); +#219823 = CIRCLE('',#219824,7.500006711464E-02); +#219824 = AXIS2_PLACEMENT_3D('',#219825,#219826,#219827); +#219825 = CARTESIAN_POINT('',(170.14646893288,-65.94214706711,1.585)); +#219826 = DIRECTION('',(0.,0.,-1.)); +#219827 = DIRECTION('',(-0.195092263892,-0.980784894138,-0.)); +#219828 = ORIENTED_EDGE('',*,*,#219829,.T.); +#219829 = EDGE_CURVE('',#219821,#219830,#219832,.T.); +#219830 = VERTEX_POINT('',#219831); +#219831 = CARTESIAN_POINT('',(170.407465,-65.866718,1.585)); +#219832 = LINE('',#219833,#219834); +#219833 = CARTESIAN_POINT('',(170.146469,-65.867147,1.585)); +#219834 = VECTOR('',#219835,1.); +#219835 = DIRECTION('',(0.999998649122,1.643701131322E-03,0.)); +#219836 = ORIENTED_EDGE('',*,*,#219837,.T.); +#219837 = EDGE_CURVE('',#219830,#219838,#219840,.T.); +#219838 = VERTEX_POINT('',#219839); +#219839 = CARTESIAN_POINT('',(170.407465,-65.636624,1.585)); +#219840 = LINE('',#219841,#219842); +#219841 = CARTESIAN_POINT('',(170.407465,-65.866718,1.585)); +#219842 = VECTOR('',#219843,1.); +#219843 = DIRECTION('',(0.,1.,0.)); +#219844 = ORIENTED_EDGE('',*,*,#219845,.T.); +#219845 = EDGE_CURVE('',#219838,#219846,#219848,.T.); +#219846 = VERTEX_POINT('',#219847); +#219847 = CARTESIAN_POINT('',(170.469669,-65.513911,1.585)); +#219848 = LINE('',#219849,#219850); +#219849 = CARTESIAN_POINT('',(170.407465,-65.636624,1.585)); +#219850 = VECTOR('',#219851,1.); +#219851 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#219852 = ORIENTED_EDGE('',*,*,#219853,.T.); +#219853 = EDGE_CURVE('',#219846,#219745,#219854,.T.); +#219854 = LINE('',#219855,#219856); +#219855 = CARTESIAN_POINT('',(170.469669,-65.513911,1.585)); +#219856 = VECTOR('',#219857,1.); +#219857 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#219858 = FACE_BOUND('',#219859,.F.); +#219859 = EDGE_LOOP('',(#219860,#219871,#219879,#219887,#219895,#219903, + #219911,#219919,#219927,#219935)); +#219860 = ORIENTED_EDGE('',*,*,#219861,.T.); +#219861 = EDGE_CURVE('',#219862,#219864,#219866,.T.); +#219862 = VERTEX_POINT('',#219863); +#219863 = CARTESIAN_POINT('',(171.006803,-65.575215,1.585)); +#219864 = VERTEX_POINT('',#219865); +#219865 = CARTESIAN_POINT('',(170.619467,-65.575215,1.585)); +#219866 = CIRCLE('',#219867,0.358503491901); +#219867 = AXIS2_PLACEMENT_3D('',#219868,#219869,#219870); +#219868 = CARTESIAN_POINT('',(170.813135,-65.876906,1.585)); +#219869 = DIRECTION('',(0.,0.,1.)); +#219870 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#219871 = ORIENTED_EDGE('',*,*,#219872,.T.); +#219872 = EDGE_CURVE('',#219864,#219873,#219875,.T.); +#219873 = VERTEX_POINT('',#219874); +#219874 = CARTESIAN_POINT('',(170.58906,-65.605622,1.585)); +#219875 = LINE('',#219876,#219877); +#219876 = CARTESIAN_POINT('',(170.619467,-65.575215,1.585)); +#219877 = VECTOR('',#219878,1.); +#219878 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#219879 = ORIENTED_EDGE('',*,*,#219880,.T.); +#219880 = EDGE_CURVE('',#219873,#219881,#219883,.T.); +#219881 = VERTEX_POINT('',#219882); +#219882 = CARTESIAN_POINT('',(170.554802,-65.674138,1.585)); +#219883 = LINE('',#219884,#219885); +#219884 = CARTESIAN_POINT('',(170.58906,-65.605622,1.585)); +#219885 = VECTOR('',#219886,1.); +#219886 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#219887 = ORIENTED_EDGE('',*,*,#219888,.T.); +#219888 = EDGE_CURVE('',#219881,#219889,#219891,.T.); +#219889 = VERTEX_POINT('',#219890); +#219890 = CARTESIAN_POINT('',(170.554802,-65.829204,1.585)); +#219891 = LINE('',#219892,#219893); +#219892 = CARTESIAN_POINT('',(170.554802,-65.674138,1.585)); +#219893 = VECTOR('',#219894,1.); +#219894 = DIRECTION('',(0.,-1.,0.)); +#219895 = ORIENTED_EDGE('',*,*,#219896,.T.); +#219896 = EDGE_CURVE('',#219889,#219897,#219899,.T.); +#219897 = VERTEX_POINT('',#219898); +#219898 = CARTESIAN_POINT('',(170.573773,-65.867147,1.585)); +#219899 = LINE('',#219900,#219901); +#219900 = CARTESIAN_POINT('',(170.554802,-65.829204,1.585)); +#219901 = VECTOR('',#219902,1.); +#219902 = DIRECTION('',(0.447204166258,-0.894431905559,0.)); +#219903 = ORIENTED_EDGE('',*,*,#219904,.T.); +#219904 = EDGE_CURVE('',#219897,#219905,#219907,.T.); +#219905 = VERTEX_POINT('',#219906); +#219906 = CARTESIAN_POINT('',(171.052498,-65.867147,1.585)); +#219907 = LINE('',#219908,#219909); +#219908 = CARTESIAN_POINT('',(170.573773,-65.867147,1.585)); +#219909 = VECTOR('',#219910,1.); +#219910 = DIRECTION('',(1.,0.,0.)); +#219911 = ORIENTED_EDGE('',*,*,#219912,.T.); +#219912 = EDGE_CURVE('',#219905,#219913,#219915,.T.); +#219913 = VERTEX_POINT('',#219914); +#219914 = CARTESIAN_POINT('',(171.071469,-65.829204,1.585)); +#219915 = LINE('',#219916,#219917); +#219916 = CARTESIAN_POINT('',(171.052498,-65.867147,1.585)); +#219917 = VECTOR('',#219918,1.); +#219918 = DIRECTION('',(0.447204166258,0.894431905559,0.)); +#219919 = ORIENTED_EDGE('',*,*,#219920,.T.); +#219920 = EDGE_CURVE('',#219913,#219921,#219923,.T.); +#219921 = VERTEX_POINT('',#219922); +#219922 = CARTESIAN_POINT('',(171.071469,-65.674138,1.585)); +#219923 = LINE('',#219924,#219925); +#219924 = CARTESIAN_POINT('',(171.071469,-65.829204,1.585)); +#219925 = VECTOR('',#219926,1.); +#219926 = DIRECTION('',(0.,1.,0.)); +#219927 = ORIENTED_EDGE('',*,*,#219928,.T.); +#219928 = EDGE_CURVE('',#219921,#219929,#219931,.T.); +#219929 = VERTEX_POINT('',#219930); +#219930 = CARTESIAN_POINT('',(171.037211,-65.605622,1.585)); +#219931 = LINE('',#219932,#219933); +#219932 = CARTESIAN_POINT('',(171.071469,-65.674138,1.585)); +#219933 = VECTOR('',#219934,1.); +#219934 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#219935 = ORIENTED_EDGE('',*,*,#219936,.T.); +#219936 = EDGE_CURVE('',#219929,#219862,#219937,.T.); +#219937 = LINE('',#219938,#219939); +#219938 = CARTESIAN_POINT('',(171.037211,-65.605622,1.585)); +#219939 = VECTOR('',#219940,1.); +#219940 = DIRECTION('',(-0.707118408268,0.707095153913,0.)); +#219941 = PLANE('',#219942); +#219942 = AXIS2_PLACEMENT_3D('',#219943,#219944,#219945); +#219943 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219944 = DIRECTION('',(0.,0.,1.)); +#219945 = DIRECTION('',(1.,0.,-0.)); +#219946 = SHELL_BASED_SURFACE_MODEL('',(#219947)); +#219947 = OPEN_SHELL('',(#219948)); +#219948 = ADVANCED_FACE('',(#219949),#219985,.T.); +#219949 = FACE_BOUND('',#219950,.F.); +#219950 = EDGE_LOOP('',(#219951,#219962,#219970,#219979)); +#219951 = ORIENTED_EDGE('',*,*,#219952,.T.); +#219952 = EDGE_CURVE('',#219953,#219955,#219957,.T.); +#219953 = VERTEX_POINT('',#219954); +#219954 = CARTESIAN_POINT('',(177.954392,-65.4056,1.585)); +#219955 = VERTEX_POINT('',#219956); +#219956 = CARTESIAN_POINT('',(177.954392,-65.2856,1.585)); +#219957 = CIRCLE('',#219958,6.000000000042E-02); +#219958 = AXIS2_PLACEMENT_3D('',#219959,#219960,#219961); +#219959 = CARTESIAN_POINT('',(177.95439177441,-65.3456,1.585)); +#219960 = DIRECTION('',(0.,0.,-1.)); +#219961 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#219962 = ORIENTED_EDGE('',*,*,#219963,.T.); +#219963 = EDGE_CURVE('',#219955,#219964,#219966,.T.); +#219964 = VERTEX_POINT('',#219965); +#219965 = CARTESIAN_POINT('',(178.428908,-65.2856,1.585)); +#219966 = LINE('',#219967,#219968); +#219967 = CARTESIAN_POINT('',(177.954392,-65.2856,1.585)); +#219968 = VECTOR('',#219969,1.); +#219969 = DIRECTION('',(1.,0.,0.)); +#219970 = ORIENTED_EDGE('',*,*,#219971,.T.); +#219971 = EDGE_CURVE('',#219964,#219972,#219974,.T.); +#219972 = VERTEX_POINT('',#219973); +#219973 = CARTESIAN_POINT('',(178.428908,-65.4056,1.585)); +#219974 = CIRCLE('',#219975,6.000000000042E-02); +#219975 = AXIS2_PLACEMENT_3D('',#219976,#219977,#219978); +#219976 = CARTESIAN_POINT('',(178.42890822558,-65.3456,1.585)); +#219977 = DIRECTION('',(0.,0.,-1.)); +#219978 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#219979 = ORIENTED_EDGE('',*,*,#219980,.T.); +#219980 = EDGE_CURVE('',#219972,#219953,#219981,.T.); +#219981 = LINE('',#219982,#219983); +#219982 = CARTESIAN_POINT('',(178.428908,-65.4056,1.585)); +#219983 = VECTOR('',#219984,1.); +#219984 = DIRECTION('',(-1.,0.,0.)); +#219985 = PLANE('',#219986); +#219986 = AXIS2_PLACEMENT_3D('',#219987,#219988,#219989); +#219987 = CARTESIAN_POINT('',(0.,0.,1.585)); +#219988 = DIRECTION('',(0.,0.,1.)); +#219989 = DIRECTION('',(1.,0.,-0.)); +#219990 = SHELL_BASED_SURFACE_MODEL('',(#219991)); +#219991 = OPEN_SHELL('',(#219992)); +#219992 = ADVANCED_FACE('',(#219993),#220095,.T.); +#219993 = FACE_BOUND('',#219994,.F.); +#219994 = EDGE_LOOP('',(#219995,#220005,#220014,#220022,#220030,#220038, + #220047,#220055,#220064,#220072,#220080,#220089)); +#219995 = ORIENTED_EDGE('',*,*,#219996,.T.); +#219996 = EDGE_CURVE('',#219997,#219999,#220001,.T.); +#219997 = VERTEX_POINT('',#219998); +#219998 = CARTESIAN_POINT('',(170.772553,-64.843118,1.585)); +#219999 = VERTEX_POINT('',#220000); +#220000 = CARTESIAN_POINT('',(171.114039,-64.588806,1.585)); +#220001 = LINE('',#220002,#220003); +#220002 = CARTESIAN_POINT('',(170.772553,-64.843118,1.585)); +#220003 = VECTOR('',#220004,1.); +#220004 = DIRECTION('',(0.802027454749,0.597287168646,0.)); +#220005 = ORIENTED_EDGE('',*,*,#220006,.T.); +#220006 = EDGE_CURVE('',#219999,#220007,#220009,.T.); +#220007 = VERTEX_POINT('',#220008); +#220008 = CARTESIAN_POINT('',(171.191469,-64.716433,1.585)); +#220009 = CIRCLE('',#220010,7.500042710847E-02); +#220010 = AXIS2_PLACEMENT_3D('',#220011,#220012,#220013); +#220011 = CARTESIAN_POINT('',(171.1464684465,-64.65643288123,1.585)); +#220012 = DIRECTION('',(0.,0.,-1.)); +#220013 = DIRECTION('',(-0.432390157695,0.901686614921,-0.)); +#220014 = ORIENTED_EDGE('',*,*,#220015,.T.); +#220015 = EDGE_CURVE('',#220007,#220016,#220018,.T.); +#220016 = VERTEX_POINT('',#220017); +#220017 = CARTESIAN_POINT('',(170.879696,-64.950261,1.585)); +#220018 = LINE('',#220019,#220020); +#220019 = CARTESIAN_POINT('',(171.191469,-64.716433,1.585)); +#220020 = VECTOR('',#220021,1.); +#220021 = DIRECTION('',(-0.800002155415,-0.599997126103,0.)); +#220022 = ORIENTED_EDGE('',*,*,#220023,.T.); +#220023 = EDGE_CURVE('',#220016,#220024,#220026,.T.); +#220024 = VERTEX_POINT('',#220025); +#220025 = CARTESIAN_POINT('',(170.89182,-64.962385,1.585)); +#220026 = LINE('',#220027,#220028); +#220027 = CARTESIAN_POINT('',(170.879696,-64.950261,1.585)); +#220028 = VECTOR('',#220029,1.); +#220029 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#220030 = ORIENTED_EDGE('',*,*,#220031,.T.); +#220031 = EDGE_CURVE('',#220024,#220032,#220034,.T.); +#220032 = VERTEX_POINT('',#220033); +#220033 = CARTESIAN_POINT('',(171.161101,-64.963826,1.585)); +#220034 = LINE('',#220035,#220036); +#220035 = CARTESIAN_POINT('',(170.89182,-64.962385,1.585)); +#220036 = VECTOR('',#220037,1.); +#220037 = DIRECTION('',(0.99998568217,-5.351210698141E-03,0.)); +#220038 = ORIENTED_EDGE('',*,*,#220039,.T.); +#220039 = EDGE_CURVE('',#220032,#220040,#220042,.T.); +#220040 = VERTEX_POINT('',#220041); +#220041 = CARTESIAN_POINT('',(171.146469,-65.112385,1.585)); +#220042 = CIRCLE('',#220043,7.500006711464E-02); +#220043 = AXIS2_PLACEMENT_3D('',#220044,#220045,#220046); +#220044 = CARTESIAN_POINT('',(171.14646906711,-65.03738493288,1.585)); +#220045 = DIRECTION('',(0.,0.,-1.)); +#220046 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#220047 = ORIENTED_EDGE('',*,*,#220048,.T.); +#220048 = EDGE_CURVE('',#220040,#220049,#220051,.T.); +#220049 = VERTEX_POINT('',#220050); +#220050 = CARTESIAN_POINT('',(170.131837,-65.110944,1.585)); +#220051 = LINE('',#220052,#220053); +#220052 = CARTESIAN_POINT('',(171.146469,-65.112385,1.585)); +#220053 = VECTOR('',#220054,1.); +#220054 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#220055 = ORIENTED_EDGE('',*,*,#220056,.T.); +#220056 = EDGE_CURVE('',#220049,#220057,#220059,.T.); +#220057 = VERTEX_POINT('',#220058); +#220058 = CARTESIAN_POINT('',(170.146469,-64.962385,1.585)); +#220059 = CIRCLE('',#220060,7.500006711464E-02); +#220060 = AXIS2_PLACEMENT_3D('',#220061,#220062,#220063); +#220061 = CARTESIAN_POINT('',(170.14646893288,-65.03738506711,1.585)); +#220062 = DIRECTION('',(0.,0.,-1.)); +#220063 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#220064 = ORIENTED_EDGE('',*,*,#220065,.T.); +#220065 = EDGE_CURVE('',#220057,#220066,#220068,.T.); +#220066 = VERTEX_POINT('',#220067); +#220067 = CARTESIAN_POINT('',(170.679688,-64.962385,1.585)); +#220068 = LINE('',#220069,#220070); +#220069 = CARTESIAN_POINT('',(170.146469,-64.962385,1.585)); +#220070 = VECTOR('',#220071,1.); +#220071 = DIRECTION('',(1.,0.,0.)); +#220072 = ORIENTED_EDGE('',*,*,#220073,.T.); +#220073 = EDGE_CURVE('',#220066,#220074,#220076,.T.); +#220074 = VERTEX_POINT('',#220075); +#220075 = CARTESIAN_POINT('',(170.417442,-64.698101,1.585)); +#220076 = LINE('',#220077,#220078); +#220077 = CARTESIAN_POINT('',(170.679688,-64.962385,1.585)); +#220078 = VECTOR('',#220079,1.); +#220079 = DIRECTION('',(-0.704364559963,0.709838408842,0.)); +#220080 = ORIENTED_EDGE('',*,*,#220081,.T.); +#220081 = EDGE_CURVE('',#220074,#220082,#220084,.T.); +#220082 = VERTEX_POINT('',#220083); +#220083 = CARTESIAN_POINT('',(170.532835,-64.6034,1.585)); +#220084 = CIRCLE('',#220085,7.499996838528E-02); +#220085 = AXIS2_PLACEMENT_3D('',#220086,#220087,#220088); +#220086 = CARTESIAN_POINT('',(170.47980202753,-64.656433,1.585)); +#220087 = DIRECTION('',(0.,0.,-1.)); +#220088 = DIRECTION('',(-0.831467384248,-0.555573567524,-0.)); +#220089 = ORIENTED_EDGE('',*,*,#220090,.T.); +#220090 = EDGE_CURVE('',#220082,#219997,#220091,.T.); +#220091 = LINE('',#220092,#220093); +#220092 = CARTESIAN_POINT('',(170.532835,-64.6034,1.585)); +#220093 = VECTOR('',#220094,1.); +#220094 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#220095 = PLANE('',#220096); +#220096 = AXIS2_PLACEMENT_3D('',#220097,#220098,#220099); +#220097 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220098 = DIRECTION('',(0.,0.,1.)); +#220099 = DIRECTION('',(1.,0.,-0.)); +#220100 = SHELL_BASED_SURFACE_MODEL('',(#220101)); +#220101 = OPEN_SHELL('',(#220102)); +#220102 = ADVANCED_FACE('',(#220103),#220197,.T.); +#220103 = FACE_BOUND('',#220104,.F.); +#220104 = EDGE_LOOP('',(#220105,#220116,#220124,#220133,#220141,#220150, + #220158,#220167,#220175,#220183,#220191)); +#220105 = ORIENTED_EDGE('',*,*,#220106,.T.); +#220106 = EDGE_CURVE('',#220107,#220109,#220111,.T.); +#220107 = VERTEX_POINT('',#220108); +#220108 = CARTESIAN_POINT('',(183.896217,-63.860139,1.585)); +#220109 = VERTEX_POINT('',#220110); +#220110 = CARTESIAN_POINT('',(184.01165,-63.8831,1.585)); +#220111 = CIRCLE('',#220112,6.000007318647E-02); +#220112 = AXIS2_PLACEMENT_3D('',#220113,#220114,#220115); +#220113 = CARTESIAN_POINT('',(183.95164992681,-63.88309982331,1.585)); +#220114 = DIRECTION('',(0.,0.,-1.)); +#220115 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#220116 = ORIENTED_EDGE('',*,*,#220117,.T.); +#220117 = EDGE_CURVE('',#220109,#220118,#220120,.T.); +#220118 = VERTEX_POINT('',#220119); +#220119 = CARTESIAN_POINT('',(184.01165,-64.8831,1.585)); +#220120 = LINE('',#220121,#220122); +#220121 = CARTESIAN_POINT('',(184.01165,-63.8831,1.585)); +#220122 = VECTOR('',#220123,1.); +#220123 = DIRECTION('',(0.,-1.,0.)); +#220124 = ORIENTED_EDGE('',*,*,#220125,.T.); +#220125 = EDGE_CURVE('',#220118,#220126,#220128,.T.); +#220126 = VERTEX_POINT('',#220127); +#220127 = CARTESIAN_POINT('',(183.95165,-64.9431,1.585)); +#220128 = CIRCLE('',#220129,5.999932016265E-02); +#220129 = AXIS2_PLACEMENT_3D('',#220130,#220131,#220132); +#220130 = CARTESIAN_POINT('',(183.95165067984,-64.88310067984,1.585)); +#220131 = DIRECTION('',(0.,0.,-1.)); +#220132 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#220133 = ORIENTED_EDGE('',*,*,#220134,.T.); +#220134 = EDGE_CURVE('',#220126,#220135,#220137,.T.); +#220135 = VERTEX_POINT('',#220136); +#220136 = CARTESIAN_POINT('',(182.43165,-64.9431,1.585)); +#220137 = LINE('',#220138,#220139); +#220138 = CARTESIAN_POINT('',(183.95165,-64.9431,1.585)); +#220139 = VECTOR('',#220140,1.); +#220140 = DIRECTION('',(-1.,0.,0.)); +#220141 = ORIENTED_EDGE('',*,*,#220142,.T.); +#220142 = EDGE_CURVE('',#220135,#220143,#220145,.T.); +#220143 = VERTEX_POINT('',#220144); +#220144 = CARTESIAN_POINT('',(182.37165,-64.8831,1.585)); +#220145 = CIRCLE('',#220146,5.999932016258E-02); +#220146 = AXIS2_PLACEMENT_3D('',#220147,#220148,#220149); +#220147 = CARTESIAN_POINT('',(182.43164932015,-64.88310067984,1.585)); +#220148 = DIRECTION('',(0.,0.,-1.)); +#220149 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#220150 = ORIENTED_EDGE('',*,*,#220151,.T.); +#220151 = EDGE_CURVE('',#220143,#220152,#220154,.T.); +#220152 = VERTEX_POINT('',#220153); +#220153 = CARTESIAN_POINT('',(182.37165,-64.8331,1.585)); +#220154 = LINE('',#220155,#220156); +#220155 = CARTESIAN_POINT('',(182.37165,-64.8831,1.585)); +#220156 = VECTOR('',#220157,1.); +#220157 = DIRECTION('',(0.,1.,0.)); +#220158 = ORIENTED_EDGE('',*,*,#220159,.T.); +#220159 = EDGE_CURVE('',#220152,#220160,#220162,.T.); +#220160 = VERTEX_POINT('',#220161); +#220161 = CARTESIAN_POINT('',(182.487083,-64.810139,1.585)); +#220162 = CIRCLE('',#220163,6.000007318648E-02); +#220163 = AXIS2_PLACEMENT_3D('',#220164,#220165,#220166); +#220164 = CARTESIAN_POINT('',(182.43165007318,-64.83309982331,1.585)); +#220165 = DIRECTION('',(0.,0.,-1.)); +#220166 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#220167 = ORIENTED_EDGE('',*,*,#220168,.T.); +#220168 = EDGE_CURVE('',#220160,#220169,#220171,.T.); +#220169 = VERTEX_POINT('',#220170); +#220170 = CARTESIAN_POINT('',(182.489661,-64.8231,1.585)); +#220171 = LINE('',#220172,#220173); +#220172 = CARTESIAN_POINT('',(182.487083,-64.810139,1.585)); +#220173 = VECTOR('',#220174,1.); +#220174 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#220175 = ORIENTED_EDGE('',*,*,#220176,.T.); +#220176 = EDGE_CURVE('',#220169,#220177,#220179,.T.); +#220177 = VERTEX_POINT('',#220178); +#220178 = CARTESIAN_POINT('',(183.89165,-64.8231,1.585)); +#220179 = LINE('',#220180,#220181); +#220180 = CARTESIAN_POINT('',(182.489661,-64.8231,1.585)); +#220181 = VECTOR('',#220182,1.); +#220182 = DIRECTION('',(1.,0.,0.)); +#220183 = ORIENTED_EDGE('',*,*,#220184,.T.); +#220184 = EDGE_CURVE('',#220177,#220185,#220187,.T.); +#220185 = VERTEX_POINT('',#220186); +#220186 = CARTESIAN_POINT('',(183.89165,-63.8831,1.585)); +#220187 = LINE('',#220188,#220189); +#220188 = CARTESIAN_POINT('',(183.89165,-64.8231,1.585)); +#220189 = VECTOR('',#220190,1.); +#220190 = DIRECTION('',(0.,1.,0.)); +#220191 = ORIENTED_EDGE('',*,*,#220192,.T.); +#220192 = EDGE_CURVE('',#220185,#220107,#220193,.T.); +#220193 = LINE('',#220194,#220195); +#220194 = CARTESIAN_POINT('',(183.89165,-63.8831,1.585)); +#220195 = VECTOR('',#220196,1.); +#220196 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#220197 = PLANE('',#220198); +#220198 = AXIS2_PLACEMENT_3D('',#220199,#220200,#220201); +#220199 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220200 = DIRECTION('',(0.,0.,1.)); +#220201 = DIRECTION('',(1.,0.,-0.)); +#220202 = SHELL_BASED_SURFACE_MODEL('',(#220203)); +#220203 = OPEN_SHELL('',(#220204)); +#220204 = ADVANCED_FACE('',(#220205),#220274,.T.); +#220205 = FACE_BOUND('',#220206,.F.); +#220206 = EDGE_LOOP('',(#220207,#220218,#220226,#220234,#220243,#220251, + #220260,#220268)); +#220207 = ORIENTED_EDGE('',*,*,#220208,.T.); +#220208 = EDGE_CURVE('',#220209,#220211,#220213,.T.); +#220209 = VERTEX_POINT('',#220210); +#220210 = CARTESIAN_POINT('',(207.386217,-63.400139,1.585)); +#220211 = VERTEX_POINT('',#220212); +#220212 = CARTESIAN_POINT('',(207.50165,-63.4231,1.585)); +#220213 = CIRCLE('',#220214,6.000007318649E-02); +#220214 = AXIS2_PLACEMENT_3D('',#220215,#220216,#220217); +#220215 = CARTESIAN_POINT('',(207.44164992681,-63.42309982331,1.585)); +#220216 = DIRECTION('',(0.,0.,-1.)); +#220217 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#220218 = ORIENTED_EDGE('',*,*,#220219,.T.); +#220219 = EDGE_CURVE('',#220211,#220220,#220222,.T.); +#220220 = VERTEX_POINT('',#220221); +#220221 = CARTESIAN_POINT('',(207.50165,-64.6131,1.585)); +#220222 = LINE('',#220223,#220224); +#220223 = CARTESIAN_POINT('',(207.50165,-63.4231,1.585)); +#220224 = VECTOR('',#220225,1.); +#220225 = DIRECTION('',(0.,-1.,0.)); +#220226 = ORIENTED_EDGE('',*,*,#220227,.T.); +#220227 = EDGE_CURVE('',#220220,#220228,#220230,.T.); +#220228 = VERTEX_POINT('',#220229); +#220229 = CARTESIAN_POINT('',(208.69165,-64.6131,1.585)); +#220230 = LINE('',#220231,#220232); +#220231 = CARTESIAN_POINT('',(207.50165,-64.6131,1.585)); +#220232 = VECTOR('',#220233,1.); +#220233 = DIRECTION('',(1.,0.,0.)); +#220234 = ORIENTED_EDGE('',*,*,#220235,.T.); +#220235 = EDGE_CURVE('',#220228,#220236,#220238,.T.); +#220236 = VERTEX_POINT('',#220237); +#220237 = CARTESIAN_POINT('',(208.69165,-64.7331,1.585)); +#220238 = CIRCLE('',#220239,6.000000000042E-02); +#220239 = AXIS2_PLACEMENT_3D('',#220240,#220241,#220242); +#220240 = CARTESIAN_POINT('',(208.69165022558,-64.6731,1.585)); +#220241 = DIRECTION('',(0.,0.,-1.)); +#220242 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#220243 = ORIENTED_EDGE('',*,*,#220244,.T.); +#220244 = EDGE_CURVE('',#220236,#220245,#220247,.T.); +#220245 = VERTEX_POINT('',#220246); +#220246 = CARTESIAN_POINT('',(207.44165,-64.7331,1.585)); +#220247 = LINE('',#220248,#220249); +#220248 = CARTESIAN_POINT('',(208.69165,-64.7331,1.585)); +#220249 = VECTOR('',#220250,1.); +#220250 = DIRECTION('',(-1.,0.,0.)); +#220251 = ORIENTED_EDGE('',*,*,#220252,.T.); +#220252 = EDGE_CURVE('',#220245,#220253,#220255,.T.); +#220253 = VERTEX_POINT('',#220254); +#220254 = CARTESIAN_POINT('',(207.38165,-64.6731,1.585)); +#220255 = CIRCLE('',#220256,5.999932016257E-02); +#220256 = AXIS2_PLACEMENT_3D('',#220257,#220258,#220259); +#220257 = CARTESIAN_POINT('',(207.44164932015,-64.67310067984,1.585)); +#220258 = DIRECTION('',(0.,0.,-1.)); +#220259 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#220260 = ORIENTED_EDGE('',*,*,#220261,.T.); +#220261 = EDGE_CURVE('',#220253,#220262,#220264,.T.); +#220262 = VERTEX_POINT('',#220263); +#220263 = CARTESIAN_POINT('',(207.38165,-63.4231,1.585)); +#220264 = LINE('',#220265,#220266); +#220265 = CARTESIAN_POINT('',(207.38165,-64.6731,1.585)); +#220266 = VECTOR('',#220267,1.); +#220267 = DIRECTION('',(0.,1.,0.)); +#220268 = ORIENTED_EDGE('',*,*,#220269,.T.); +#220269 = EDGE_CURVE('',#220262,#220209,#220270,.T.); +#220270 = LINE('',#220271,#220272); +#220271 = CARTESIAN_POINT('',(207.38165,-63.4231,1.585)); +#220272 = VECTOR('',#220273,1.); +#220273 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#220274 = PLANE('',#220275); +#220275 = AXIS2_PLACEMENT_3D('',#220276,#220277,#220278); +#220276 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220277 = DIRECTION('',(0.,0.,1.)); +#220278 = DIRECTION('',(1.,0.,-0.)); +#220279 = SHELL_BASED_SURFACE_MODEL('',(#220280)); +#220280 = OPEN_SHELL('',(#220281)); +#220281 = ADVANCED_FACE('',(#220282,#220352,#220536,#220620,#220654, + #220688),#220722,.T.); +#220282 = FACE_BOUND('',#220283,.F.); +#220283 = EDGE_LOOP('',(#220284,#220295,#220303,#220312,#220320,#220329, + #220337,#220346)); +#220284 = ORIENTED_EDGE('',*,*,#220285,.T.); +#220285 = EDGE_CURVE('',#220286,#220288,#220290,.T.); +#220286 = VERTEX_POINT('',#220287); +#220287 = CARTESIAN_POINT('',(207.67165,-51.7631,1.585)); +#220288 = VERTEX_POINT('',#220289); +#220289 = CARTESIAN_POINT('',(207.73165,-51.7031,1.585)); +#220290 = CIRCLE('',#220291,5.999932016262E-02); +#220291 = AXIS2_PLACEMENT_3D('',#220292,#220293,#220294); +#220292 = CARTESIAN_POINT('',(207.73164932015,-51.76309932015,1.585)); +#220293 = DIRECTION('',(0.,0.,-1.)); +#220294 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#220295 = ORIENTED_EDGE('',*,*,#220296,.T.); +#220296 = EDGE_CURVE('',#220288,#220297,#220299,.T.); +#220297 = VERTEX_POINT('',#220298); +#220298 = CARTESIAN_POINT('',(213.70165,-51.7031,1.585)); +#220299 = LINE('',#220300,#220301); +#220300 = CARTESIAN_POINT('',(207.73165,-51.7031,1.585)); +#220301 = VECTOR('',#220302,1.); +#220302 = DIRECTION('',(1.,0.,0.)); +#220303 = ORIENTED_EDGE('',*,*,#220304,.T.); +#220304 = EDGE_CURVE('',#220297,#220305,#220307,.T.); +#220305 = VERTEX_POINT('',#220306); +#220306 = CARTESIAN_POINT('',(213.76165,-51.7631,1.585)); +#220307 = CIRCLE('',#220308,5.999932016259E-02); +#220308 = AXIS2_PLACEMENT_3D('',#220309,#220310,#220311); +#220309 = CARTESIAN_POINT('',(213.70165067984,-51.76309932015,1.585)); +#220310 = DIRECTION('',(0.,0.,-1.)); +#220311 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#220312 = ORIENTED_EDGE('',*,*,#220313,.T.); +#220313 = EDGE_CURVE('',#220305,#220314,#220316,.T.); +#220314 = VERTEX_POINT('',#220315); +#220315 = CARTESIAN_POINT('',(213.76165,-64.3831,1.585)); +#220316 = LINE('',#220317,#220318); +#220317 = CARTESIAN_POINT('',(213.76165,-51.7631,1.585)); +#220318 = VECTOR('',#220319,1.); +#220319 = DIRECTION('',(0.,-1.,0.)); +#220320 = ORIENTED_EDGE('',*,*,#220321,.T.); +#220321 = EDGE_CURVE('',#220314,#220322,#220324,.T.); +#220322 = VERTEX_POINT('',#220323); +#220323 = CARTESIAN_POINT('',(213.70165,-64.4431,1.585)); +#220324 = CIRCLE('',#220325,5.999932016265E-02); +#220325 = AXIS2_PLACEMENT_3D('',#220326,#220327,#220328); +#220326 = CARTESIAN_POINT('',(213.70165067984,-64.38310067984,1.585)); +#220327 = DIRECTION('',(0.,0.,-1.)); +#220328 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#220329 = ORIENTED_EDGE('',*,*,#220330,.T.); +#220330 = EDGE_CURVE('',#220322,#220331,#220333,.T.); +#220331 = VERTEX_POINT('',#220332); +#220332 = CARTESIAN_POINT('',(207.73165,-64.4431,1.585)); +#220333 = LINE('',#220334,#220335); +#220334 = CARTESIAN_POINT('',(213.70165,-64.4431,1.585)); +#220335 = VECTOR('',#220336,1.); +#220336 = DIRECTION('',(-1.,0.,0.)); +#220337 = ORIENTED_EDGE('',*,*,#220338,.T.); +#220338 = EDGE_CURVE('',#220331,#220339,#220341,.T.); +#220339 = VERTEX_POINT('',#220340); +#220340 = CARTESIAN_POINT('',(207.67165,-64.3831,1.585)); +#220341 = CIRCLE('',#220342,5.999932016256E-02); +#220342 = AXIS2_PLACEMENT_3D('',#220343,#220344,#220345); +#220343 = CARTESIAN_POINT('',(207.73164932015,-64.38310067984,1.585)); +#220344 = DIRECTION('',(0.,0.,-1.)); +#220345 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#220346 = ORIENTED_EDGE('',*,*,#220347,.T.); +#220347 = EDGE_CURVE('',#220339,#220286,#220348,.T.); +#220348 = LINE('',#220349,#220350); +#220349 = CARTESIAN_POINT('',(207.67165,-64.3831,1.585)); +#220350 = VECTOR('',#220351,1.); +#220351 = DIRECTION('',(0.,1.,0.)); +#220352 = FACE_BOUND('',#220353,.F.); +#220353 = EDGE_LOOP('',(#220354,#220365,#220373,#220381,#220389,#220398, + #220406,#220414,#220422,#220431,#220439,#220448,#220456,#220464, + #220472,#220481,#220489,#220497,#220505,#220514,#220522,#220530)); +#220354 = ORIENTED_EDGE('',*,*,#220355,.T.); +#220355 = EDGE_CURVE('',#220356,#220358,#220360,.T.); +#220356 = VERTEX_POINT('',#220357); +#220357 = CARTESIAN_POINT('',(209.99165,-52.5831,1.585)); +#220358 = VERTEX_POINT('',#220359); +#220359 = CARTESIAN_POINT('',(209.93165,-52.5231,1.585)); +#220360 = CIRCLE('',#220361,5.999932016261E-02); +#220361 = AXIS2_PLACEMENT_3D('',#220362,#220363,#220364); +#220362 = CARTESIAN_POINT('',(209.99164932015,-52.52310067984,1.585)); +#220363 = DIRECTION('',(0.,0.,-1.)); +#220364 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#220365 = ORIENTED_EDGE('',*,*,#220366,.T.); +#220366 = EDGE_CURVE('',#220358,#220367,#220369,.T.); +#220367 = VERTEX_POINT('',#220368); +#220368 = CARTESIAN_POINT('',(209.93165,-51.8231,1.585)); +#220369 = LINE('',#220370,#220371); +#220370 = CARTESIAN_POINT('',(209.93165,-52.5231,1.585)); +#220371 = VECTOR('',#220372,1.); +#220372 = DIRECTION('',(0.,1.,0.)); +#220373 = ORIENTED_EDGE('',*,*,#220374,.T.); +#220374 = EDGE_CURVE('',#220367,#220375,#220377,.T.); +#220375 = VERTEX_POINT('',#220376); +#220376 = CARTESIAN_POINT('',(208.55165,-51.8231,1.585)); +#220377 = LINE('',#220378,#220379); +#220378 = CARTESIAN_POINT('',(209.93165,-51.8231,1.585)); +#220379 = VECTOR('',#220380,1.); +#220380 = DIRECTION('',(-1.,0.,0.)); +#220381 = ORIENTED_EDGE('',*,*,#220382,.T.); +#220382 = EDGE_CURVE('',#220375,#220383,#220385,.T.); +#220383 = VERTEX_POINT('',#220384); +#220384 = CARTESIAN_POINT('',(208.55165,-53.5731,1.585)); +#220385 = LINE('',#220386,#220387); +#220386 = CARTESIAN_POINT('',(208.55165,-51.8231,1.585)); +#220387 = VECTOR('',#220388,1.); +#220388 = DIRECTION('',(0.,-1.,0.)); +#220389 = ORIENTED_EDGE('',*,*,#220390,.T.); +#220390 = EDGE_CURVE('',#220383,#220391,#220393,.T.); +#220391 = VERTEX_POINT('',#220392); +#220392 = CARTESIAN_POINT('',(208.49165,-53.6331,1.585)); +#220393 = CIRCLE('',#220394,5.999932016262E-02); +#220394 = AXIS2_PLACEMENT_3D('',#220395,#220396,#220397); +#220395 = CARTESIAN_POINT('',(208.49165067984,-53.57310067984,1.585)); +#220396 = DIRECTION('',(0.,0.,-1.)); +#220397 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#220398 = ORIENTED_EDGE('',*,*,#220399,.T.); +#220399 = EDGE_CURVE('',#220391,#220400,#220402,.T.); +#220400 = VERTEX_POINT('',#220401); +#220401 = CARTESIAN_POINT('',(207.79165,-53.6331,1.585)); +#220402 = LINE('',#220403,#220404); +#220403 = CARTESIAN_POINT('',(208.49165,-53.6331,1.585)); +#220404 = VECTOR('',#220405,1.); +#220405 = DIRECTION('',(-1.,0.,0.)); +#220406 = ORIENTED_EDGE('',*,*,#220407,.T.); +#220407 = EDGE_CURVE('',#220400,#220408,#220410,.T.); +#220408 = VERTEX_POINT('',#220409); +#220409 = CARTESIAN_POINT('',(207.79165,-55.0131,1.585)); +#220410 = LINE('',#220411,#220412); +#220411 = CARTESIAN_POINT('',(207.79165,-53.6331,1.585)); +#220412 = VECTOR('',#220413,1.); +#220413 = DIRECTION('',(0.,-1.,0.)); +#220414 = ORIENTED_EDGE('',*,*,#220415,.T.); +#220415 = EDGE_CURVE('',#220408,#220416,#220418,.T.); +#220416 = VERTEX_POINT('',#220417); +#220417 = CARTESIAN_POINT('',(208.49165,-55.0131,1.585)); +#220418 = LINE('',#220419,#220420); +#220419 = CARTESIAN_POINT('',(207.79165,-55.0131,1.585)); +#220420 = VECTOR('',#220421,1.); +#220421 = DIRECTION('',(1.,0.,0.)); +#220422 = ORIENTED_EDGE('',*,*,#220423,.T.); +#220423 = EDGE_CURVE('',#220416,#220424,#220426,.T.); +#220424 = VERTEX_POINT('',#220425); +#220425 = CARTESIAN_POINT('',(208.55165,-55.0731,1.585)); +#220426 = CIRCLE('',#220427,5.999932016259E-02); +#220427 = AXIS2_PLACEMENT_3D('',#220428,#220429,#220430); +#220428 = CARTESIAN_POINT('',(208.49165067984,-55.07309932015,1.585)); +#220429 = DIRECTION('',(0.,0.,-1.)); +#220430 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#220431 = ORIENTED_EDGE('',*,*,#220432,.T.); +#220432 = EDGE_CURVE('',#220424,#220433,#220435,.T.); +#220433 = VERTEX_POINT('',#220434); +#220434 = CARTESIAN_POINT('',(208.55165,-61.0731,1.585)); +#220435 = LINE('',#220436,#220437); +#220436 = CARTESIAN_POINT('',(208.55165,-55.0731,1.585)); +#220437 = VECTOR('',#220438,1.); +#220438 = DIRECTION('',(0.,-1.,0.)); +#220439 = ORIENTED_EDGE('',*,*,#220440,.T.); +#220440 = EDGE_CURVE('',#220433,#220441,#220443,.T.); +#220441 = VERTEX_POINT('',#220442); +#220442 = CARTESIAN_POINT('',(208.49165,-61.1331,1.585)); +#220443 = CIRCLE('',#220444,5.999932016262E-02); +#220444 = AXIS2_PLACEMENT_3D('',#220445,#220446,#220447); +#220445 = CARTESIAN_POINT('',(208.49165067984,-61.07310067984,1.585)); +#220446 = DIRECTION('',(0.,0.,-1.)); +#220447 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#220448 = ORIENTED_EDGE('',*,*,#220449,.T.); +#220449 = EDGE_CURVE('',#220441,#220450,#220452,.T.); +#220450 = VERTEX_POINT('',#220451); +#220451 = CARTESIAN_POINT('',(207.79165,-61.1331,1.585)); +#220452 = LINE('',#220453,#220454); +#220453 = CARTESIAN_POINT('',(208.49165,-61.1331,1.585)); +#220454 = VECTOR('',#220455,1.); +#220455 = DIRECTION('',(-1.,0.,0.)); +#220456 = ORIENTED_EDGE('',*,*,#220457,.T.); +#220457 = EDGE_CURVE('',#220450,#220458,#220460,.T.); +#220458 = VERTEX_POINT('',#220459); +#220459 = CARTESIAN_POINT('',(207.79165,-62.5131,1.585)); +#220460 = LINE('',#220461,#220462); +#220461 = CARTESIAN_POINT('',(207.79165,-61.1331,1.585)); +#220462 = VECTOR('',#220463,1.); +#220463 = DIRECTION('',(0.,-1.,0.)); +#220464 = ORIENTED_EDGE('',*,*,#220465,.T.); +#220465 = EDGE_CURVE('',#220458,#220466,#220468,.T.); +#220466 = VERTEX_POINT('',#220467); +#220467 = CARTESIAN_POINT('',(208.49165,-62.5131,1.585)); +#220468 = LINE('',#220469,#220470); +#220469 = CARTESIAN_POINT('',(207.79165,-62.5131,1.585)); +#220470 = VECTOR('',#220471,1.); +#220471 = DIRECTION('',(1.,0.,0.)); +#220472 = ORIENTED_EDGE('',*,*,#220473,.T.); +#220473 = EDGE_CURVE('',#220466,#220474,#220476,.T.); +#220474 = VERTEX_POINT('',#220475); +#220475 = CARTESIAN_POINT('',(208.55165,-62.5731,1.585)); +#220476 = CIRCLE('',#220477,5.999932016259E-02); +#220477 = AXIS2_PLACEMENT_3D('',#220478,#220479,#220480); +#220478 = CARTESIAN_POINT('',(208.49165067984,-62.57309932015,1.585)); +#220479 = DIRECTION('',(0.,0.,-1.)); +#220480 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#220481 = ORIENTED_EDGE('',*,*,#220482,.T.); +#220482 = EDGE_CURVE('',#220474,#220483,#220485,.T.); +#220483 = VERTEX_POINT('',#220484); +#220484 = CARTESIAN_POINT('',(208.55165,-64.3231,1.585)); +#220485 = LINE('',#220486,#220487); +#220486 = CARTESIAN_POINT('',(208.55165,-62.5731,1.585)); +#220487 = VECTOR('',#220488,1.); +#220488 = DIRECTION('',(0.,-1.,0.)); +#220489 = ORIENTED_EDGE('',*,*,#220490,.T.); +#220490 = EDGE_CURVE('',#220483,#220491,#220493,.T.); +#220491 = VERTEX_POINT('',#220492); +#220492 = CARTESIAN_POINT('',(209.93165,-64.3231,1.585)); +#220493 = LINE('',#220494,#220495); +#220494 = CARTESIAN_POINT('',(208.55165,-64.3231,1.585)); +#220495 = VECTOR('',#220496,1.); +#220496 = DIRECTION('',(1.,0.,0.)); +#220497 = ORIENTED_EDGE('',*,*,#220498,.T.); +#220498 = EDGE_CURVE('',#220491,#220499,#220501,.T.); +#220499 = VERTEX_POINT('',#220500); +#220500 = CARTESIAN_POINT('',(209.93165,-63.6231,1.585)); +#220501 = LINE('',#220502,#220503); +#220502 = CARTESIAN_POINT('',(209.93165,-64.3231,1.585)); +#220503 = VECTOR('',#220504,1.); +#220504 = DIRECTION('',(0.,1.,0.)); +#220505 = ORIENTED_EDGE('',*,*,#220506,.T.); +#220506 = EDGE_CURVE('',#220499,#220507,#220509,.T.); +#220507 = VERTEX_POINT('',#220508); +#220508 = CARTESIAN_POINT('',(209.99165,-63.5631,1.585)); +#220509 = CIRCLE('',#220510,5.999932016262E-02); +#220510 = AXIS2_PLACEMENT_3D('',#220511,#220512,#220513); +#220511 = CARTESIAN_POINT('',(209.99164932015,-63.62309932015,1.585)); +#220512 = DIRECTION('',(0.,0.,-1.)); +#220513 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#220514 = ORIENTED_EDGE('',*,*,#220515,.T.); +#220515 = EDGE_CURVE('',#220507,#220516,#220518,.T.); +#220516 = VERTEX_POINT('',#220517); +#220517 = CARTESIAN_POINT('',(212.88165,-63.5631,1.585)); +#220518 = LINE('',#220519,#220520); +#220519 = CARTESIAN_POINT('',(209.99165,-63.5631,1.585)); +#220520 = VECTOR('',#220521,1.); +#220521 = DIRECTION('',(1.,0.,0.)); +#220522 = ORIENTED_EDGE('',*,*,#220523,.T.); +#220523 = EDGE_CURVE('',#220516,#220524,#220526,.T.); +#220524 = VERTEX_POINT('',#220525); +#220525 = CARTESIAN_POINT('',(212.88165,-52.5831,1.585)); +#220526 = LINE('',#220527,#220528); +#220527 = CARTESIAN_POINT('',(212.88165,-63.5631,1.585)); +#220528 = VECTOR('',#220529,1.); +#220529 = DIRECTION('',(0.,1.,0.)); +#220530 = ORIENTED_EDGE('',*,*,#220531,.T.); +#220531 = EDGE_CURVE('',#220524,#220356,#220532,.T.); +#220532 = LINE('',#220533,#220534); +#220533 = CARTESIAN_POINT('',(212.88165,-52.5831,1.585)); +#220534 = VECTOR('',#220535,1.); +#220535 = DIRECTION('',(-1.,0.,0.)); +#220536 = FACE_BOUND('',#220537,.F.); +#220537 = EDGE_LOOP('',(#220538,#220548,#220556,#220564,#220572,#220581, + #220589,#220598,#220606,#220614)); +#220538 = ORIENTED_EDGE('',*,*,#220539,.T.); +#220539 = EDGE_CURVE('',#220540,#220542,#220544,.T.); +#220540 = VERTEX_POINT('',#220541); +#220541 = CARTESIAN_POINT('',(213.64165,-64.3231,1.585)); +#220542 = VERTEX_POINT('',#220543); +#220543 = CARTESIAN_POINT('',(213.64165,-51.8231,1.585)); +#220544 = LINE('',#220545,#220546); +#220545 = CARTESIAN_POINT('',(213.64165,-64.3231,1.585)); +#220546 = VECTOR('',#220547,1.); +#220547 = DIRECTION('',(0.,1.,0.)); +#220548 = ORIENTED_EDGE('',*,*,#220549,.T.); +#220549 = EDGE_CURVE('',#220542,#220550,#220552,.T.); +#220550 = VERTEX_POINT('',#220551); +#220551 = CARTESIAN_POINT('',(210.05165,-51.8231,1.585)); +#220552 = LINE('',#220553,#220554); +#220553 = CARTESIAN_POINT('',(213.64165,-51.8231,1.585)); +#220554 = VECTOR('',#220555,1.); +#220555 = DIRECTION('',(-1.,0.,0.)); +#220556 = ORIENTED_EDGE('',*,*,#220557,.T.); +#220557 = EDGE_CURVE('',#220550,#220558,#220560,.T.); +#220558 = VERTEX_POINT('',#220559); +#220559 = CARTESIAN_POINT('',(210.05165,-52.4631,1.585)); +#220560 = LINE('',#220561,#220562); +#220561 = CARTESIAN_POINT('',(210.05165,-51.8231,1.585)); +#220562 = VECTOR('',#220563,1.); +#220563 = DIRECTION('',(0.,-1.,0.)); +#220564 = ORIENTED_EDGE('',*,*,#220565,.T.); +#220565 = EDGE_CURVE('',#220558,#220566,#220568,.T.); +#220566 = VERTEX_POINT('',#220567); +#220567 = CARTESIAN_POINT('',(212.94165,-52.4631,1.585)); +#220568 = LINE('',#220569,#220570); +#220569 = CARTESIAN_POINT('',(210.05165,-52.4631,1.585)); +#220570 = VECTOR('',#220571,1.); +#220571 = DIRECTION('',(1.,0.,0.)); +#220572 = ORIENTED_EDGE('',*,*,#220573,.T.); +#220573 = EDGE_CURVE('',#220566,#220574,#220576,.T.); +#220574 = VERTEX_POINT('',#220575); +#220575 = CARTESIAN_POINT('',(213.00165,-52.5231,1.585)); +#220576 = CIRCLE('',#220577,5.999932016265E-02); +#220577 = AXIS2_PLACEMENT_3D('',#220578,#220579,#220580); +#220578 = CARTESIAN_POINT('',(212.94165067984,-52.52309932015,1.585)); +#220579 = DIRECTION('',(0.,0.,-1.)); +#220580 = DIRECTION('',(-1.133081517401E-05,0.999999999936,0.)); +#220581 = ORIENTED_EDGE('',*,*,#220582,.T.); +#220582 = EDGE_CURVE('',#220574,#220583,#220585,.T.); +#220583 = VERTEX_POINT('',#220584); +#220584 = CARTESIAN_POINT('',(213.00165,-63.6231,1.585)); +#220585 = LINE('',#220586,#220587); +#220586 = CARTESIAN_POINT('',(213.00165,-52.5231,1.585)); +#220587 = VECTOR('',#220588,1.); +#220588 = DIRECTION('',(0.,-1.,0.)); +#220589 = ORIENTED_EDGE('',*,*,#220590,.T.); +#220590 = EDGE_CURVE('',#220583,#220591,#220593,.T.); +#220591 = VERTEX_POINT('',#220592); +#220592 = CARTESIAN_POINT('',(212.94165,-63.6831,1.585)); +#220593 = CIRCLE('',#220594,5.999932016262E-02); +#220594 = AXIS2_PLACEMENT_3D('',#220595,#220596,#220597); +#220595 = CARTESIAN_POINT('',(212.94165067984,-63.62310067984,1.585)); +#220596 = DIRECTION('',(0.,0.,-1.)); +#220597 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#220598 = ORIENTED_EDGE('',*,*,#220599,.T.); +#220599 = EDGE_CURVE('',#220591,#220600,#220602,.T.); +#220600 = VERTEX_POINT('',#220601); +#220601 = CARTESIAN_POINT('',(210.05165,-63.6831,1.585)); +#220602 = LINE('',#220603,#220604); +#220603 = CARTESIAN_POINT('',(212.94165,-63.6831,1.585)); +#220604 = VECTOR('',#220605,1.); +#220605 = DIRECTION('',(-1.,0.,0.)); +#220606 = ORIENTED_EDGE('',*,*,#220607,.T.); +#220607 = EDGE_CURVE('',#220600,#220608,#220610,.T.); +#220608 = VERTEX_POINT('',#220609); +#220609 = CARTESIAN_POINT('',(210.05165,-64.3231,1.585)); +#220610 = LINE('',#220611,#220612); +#220611 = CARTESIAN_POINT('',(210.05165,-63.6831,1.585)); +#220612 = VECTOR('',#220613,1.); +#220613 = DIRECTION('',(0.,-1.,0.)); +#220614 = ORIENTED_EDGE('',*,*,#220615,.T.); +#220615 = EDGE_CURVE('',#220608,#220540,#220616,.T.); +#220616 = LINE('',#220617,#220618); +#220617 = CARTESIAN_POINT('',(210.05165,-64.3231,1.585)); +#220618 = VECTOR('',#220619,1.); +#220619 = DIRECTION('',(1.,0.,0.)); +#220620 = FACE_BOUND('',#220621,.F.); +#220621 = EDGE_LOOP('',(#220622,#220632,#220640,#220648)); +#220622 = ORIENTED_EDGE('',*,*,#220623,.T.); +#220623 = EDGE_CURVE('',#220624,#220626,#220628,.T.); +#220624 = VERTEX_POINT('',#220625); +#220625 = CARTESIAN_POINT('',(208.43165,-64.3131,1.585)); +#220626 = VERTEX_POINT('',#220627); +#220627 = CARTESIAN_POINT('',(208.43165,-62.6331,1.585)); +#220628 = LINE('',#220629,#220630); +#220629 = CARTESIAN_POINT('',(208.43165,-64.3131,1.585)); +#220630 = VECTOR('',#220631,1.); +#220631 = DIRECTION('',(0.,1.,0.)); +#220632 = ORIENTED_EDGE('',*,*,#220633,.T.); +#220633 = EDGE_CURVE('',#220626,#220634,#220636,.T.); +#220634 = VERTEX_POINT('',#220635); +#220635 = CARTESIAN_POINT('',(207.80165,-62.6331,1.585)); +#220636 = LINE('',#220637,#220638); +#220637 = CARTESIAN_POINT('',(208.43165,-62.6331,1.585)); +#220638 = VECTOR('',#220639,1.); +#220639 = DIRECTION('',(-1.,0.,0.)); +#220640 = ORIENTED_EDGE('',*,*,#220641,.T.); +#220641 = EDGE_CURVE('',#220634,#220642,#220644,.T.); +#220642 = VERTEX_POINT('',#220643); +#220643 = CARTESIAN_POINT('',(207.80165,-64.3131,1.585)); +#220644 = LINE('',#220645,#220646); +#220645 = CARTESIAN_POINT('',(207.80165,-62.6331,1.585)); +#220646 = VECTOR('',#220647,1.); +#220647 = DIRECTION('',(0.,-1.,0.)); +#220648 = ORIENTED_EDGE('',*,*,#220649,.T.); +#220649 = EDGE_CURVE('',#220642,#220624,#220650,.T.); +#220650 = LINE('',#220651,#220652); +#220651 = CARTESIAN_POINT('',(207.80165,-64.3131,1.585)); +#220652 = VECTOR('',#220653,1.); +#220653 = DIRECTION('',(1.,0.,0.)); +#220654 = FACE_BOUND('',#220655,.F.); +#220655 = EDGE_LOOP('',(#220656,#220666,#220674,#220682)); +#220656 = ORIENTED_EDGE('',*,*,#220657,.T.); +#220657 = EDGE_CURVE('',#220658,#220660,#220662,.T.); +#220658 = VERTEX_POINT('',#220659); +#220659 = CARTESIAN_POINT('',(208.43165,-61.0131,1.585)); +#220660 = VERTEX_POINT('',#220661); +#220661 = CARTESIAN_POINT('',(208.43165,-55.1331,1.585)); +#220662 = LINE('',#220663,#220664); +#220663 = CARTESIAN_POINT('',(208.43165,-61.0131,1.585)); +#220664 = VECTOR('',#220665,1.); +#220665 = DIRECTION('',(0.,1.,0.)); +#220666 = ORIENTED_EDGE('',*,*,#220667,.T.); +#220667 = EDGE_CURVE('',#220660,#220668,#220670,.T.); +#220668 = VERTEX_POINT('',#220669); +#220669 = CARTESIAN_POINT('',(207.80165,-55.1331,1.585)); +#220670 = LINE('',#220671,#220672); +#220671 = CARTESIAN_POINT('',(208.43165,-55.1331,1.585)); +#220672 = VECTOR('',#220673,1.); +#220673 = DIRECTION('',(-1.,0.,0.)); +#220674 = ORIENTED_EDGE('',*,*,#220675,.T.); +#220675 = EDGE_CURVE('',#220668,#220676,#220678,.T.); +#220676 = VERTEX_POINT('',#220677); +#220677 = CARTESIAN_POINT('',(207.80165,-61.0131,1.585)); +#220678 = LINE('',#220679,#220680); +#220679 = CARTESIAN_POINT('',(207.80165,-55.1331,1.585)); +#220680 = VECTOR('',#220681,1.); +#220681 = DIRECTION('',(0.,-1.,0.)); +#220682 = ORIENTED_EDGE('',*,*,#220683,.T.); +#220683 = EDGE_CURVE('',#220676,#220658,#220684,.T.); +#220684 = LINE('',#220685,#220686); +#220685 = CARTESIAN_POINT('',(207.80165,-61.0131,1.585)); +#220686 = VECTOR('',#220687,1.); +#220687 = DIRECTION('',(1.,0.,0.)); +#220688 = FACE_BOUND('',#220689,.F.); +#220689 = EDGE_LOOP('',(#220690,#220700,#220708,#220716)); +#220690 = ORIENTED_EDGE('',*,*,#220691,.T.); +#220691 = EDGE_CURVE('',#220692,#220694,#220696,.T.); +#220692 = VERTEX_POINT('',#220693); +#220693 = CARTESIAN_POINT('',(208.43165,-53.5131,1.585)); +#220694 = VERTEX_POINT('',#220695); +#220695 = CARTESIAN_POINT('',(208.43165,-51.8331,1.585)); +#220696 = LINE('',#220697,#220698); +#220697 = CARTESIAN_POINT('',(208.43165,-53.5131,1.585)); +#220698 = VECTOR('',#220699,1.); +#220699 = DIRECTION('',(0.,1.,0.)); +#220700 = ORIENTED_EDGE('',*,*,#220701,.T.); +#220701 = EDGE_CURVE('',#220694,#220702,#220704,.T.); +#220702 = VERTEX_POINT('',#220703); +#220703 = CARTESIAN_POINT('',(207.80165,-51.8331,1.585)); +#220704 = LINE('',#220705,#220706); +#220705 = CARTESIAN_POINT('',(208.43165,-51.8331,1.585)); +#220706 = VECTOR('',#220707,1.); +#220707 = DIRECTION('',(-1.,0.,0.)); +#220708 = ORIENTED_EDGE('',*,*,#220709,.T.); +#220709 = EDGE_CURVE('',#220702,#220710,#220712,.T.); +#220710 = VERTEX_POINT('',#220711); +#220711 = CARTESIAN_POINT('',(207.80165,-53.5131,1.585)); +#220712 = LINE('',#220713,#220714); +#220713 = CARTESIAN_POINT('',(207.80165,-51.8331,1.585)); +#220714 = VECTOR('',#220715,1.); +#220715 = DIRECTION('',(0.,-1.,0.)); +#220716 = ORIENTED_EDGE('',*,*,#220717,.T.); +#220717 = EDGE_CURVE('',#220710,#220692,#220718,.T.); +#220718 = LINE('',#220719,#220720); +#220719 = CARTESIAN_POINT('',(207.80165,-53.5131,1.585)); +#220720 = VECTOR('',#220721,1.); +#220721 = DIRECTION('',(1.,0.,0.)); +#220722 = PLANE('',#220723); +#220723 = AXIS2_PLACEMENT_3D('',#220724,#220725,#220726); +#220724 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220725 = DIRECTION('',(0.,0.,1.)); +#220726 = DIRECTION('',(1.,0.,-0.)); +#220727 = SHELL_BASED_SURFACE_MODEL('',(#220728)); +#220728 = OPEN_SHELL('',(#220729)); +#220729 = ADVANCED_FACE('',(#220730),#220766,.T.); +#220730 = FACE_BOUND('',#220731,.F.); +#220731 = EDGE_LOOP('',(#220732,#220743,#220751,#220760)); +#220732 = ORIENTED_EDGE('',*,*,#220733,.T.); +#220733 = EDGE_CURVE('',#220734,#220736,#220738,.T.); +#220734 = VERTEX_POINT('',#220735); +#220735 = CARTESIAN_POINT('',(177.954392,-64.3606,1.585)); +#220736 = VERTEX_POINT('',#220737); +#220737 = CARTESIAN_POINT('',(177.954392,-64.2406,1.585)); +#220738 = CIRCLE('',#220739,6.000000000042E-02); +#220739 = AXIS2_PLACEMENT_3D('',#220740,#220741,#220742); +#220740 = CARTESIAN_POINT('',(177.95439177441,-64.3006,1.585)); +#220741 = DIRECTION('',(0.,0.,-1.)); +#220742 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#220743 = ORIENTED_EDGE('',*,*,#220744,.T.); +#220744 = EDGE_CURVE('',#220736,#220745,#220747,.T.); +#220745 = VERTEX_POINT('',#220746); +#220746 = CARTESIAN_POINT('',(178.428908,-64.2406,1.585)); +#220747 = LINE('',#220748,#220749); +#220748 = CARTESIAN_POINT('',(177.954392,-64.2406,1.585)); +#220749 = VECTOR('',#220750,1.); +#220750 = DIRECTION('',(1.,0.,0.)); +#220751 = ORIENTED_EDGE('',*,*,#220752,.T.); +#220752 = EDGE_CURVE('',#220745,#220753,#220755,.T.); +#220753 = VERTEX_POINT('',#220754); +#220754 = CARTESIAN_POINT('',(178.428908,-64.3606,1.585)); +#220755 = CIRCLE('',#220756,6.000000000042E-02); +#220756 = AXIS2_PLACEMENT_3D('',#220757,#220758,#220759); +#220757 = CARTESIAN_POINT('',(178.42890822558,-64.3006,1.585)); +#220758 = DIRECTION('',(0.,0.,-1.)); +#220759 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#220760 = ORIENTED_EDGE('',*,*,#220761,.T.); +#220761 = EDGE_CURVE('',#220753,#220734,#220762,.T.); +#220762 = LINE('',#220763,#220764); +#220763 = CARTESIAN_POINT('',(178.428908,-64.3606,1.585)); +#220764 = VECTOR('',#220765,1.); +#220765 = DIRECTION('',(-1.,0.,0.)); +#220766 = PLANE('',#220767); +#220767 = AXIS2_PLACEMENT_3D('',#220768,#220769,#220770); +#220768 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220769 = DIRECTION('',(0.,0.,1.)); +#220770 = DIRECTION('',(1.,0.,-0.)); +#220771 = SHELL_BASED_SURFACE_MODEL('',(#220772)); +#220772 = OPEN_SHELL('',(#220773)); +#220773 = ADVANCED_FACE('',(#220774,#220890),#220973,.T.); +#220774 = FACE_BOUND('',#220775,.F.); +#220775 = EDGE_LOOP('',(#220776,#220787,#220795,#220803,#220811,#220819, + #220827,#220835,#220843,#220851,#220859,#220867,#220875,#220884)); +#220776 = ORIENTED_EDGE('',*,*,#220777,.T.); +#220777 = EDGE_CURVE('',#220778,#220780,#220782,.T.); +#220778 = VERTEX_POINT('',#220779); +#220779 = CARTESIAN_POINT('',(198.879996,-63.263287,1.585)); +#220780 = VERTEX_POINT('',#220781); +#220781 = CARTESIAN_POINT('',(198.953555,-63.202919,1.585)); +#220782 = CIRCLE('',#220783,7.500074938986E-02); +#220783 = AXIS2_PLACEMENT_3D('',#220784,#220785,#220786); +#220784 = CARTESIAN_POINT('',(198.95355546611,-63.27791974938,1.585)); +#220785 = DIRECTION('',(0.,0.,-1.)); +#220786 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#220787 = ORIENTED_EDGE('',*,*,#220788,.T.); +#220788 = EDGE_CURVE('',#220780,#220789,#220791,.T.); +#220789 = VERTEX_POINT('',#220790); +#220790 = CARTESIAN_POINT('',(199.199055,-63.203648,1.585)); +#220791 = LINE('',#220792,#220793); +#220792 = CARTESIAN_POINT('',(198.953555,-63.202919,1.585)); +#220793 = VECTOR('',#220794,1.); +#220794 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#220795 = ORIENTED_EDGE('',*,*,#220796,.T.); +#220796 = EDGE_CURVE('',#220789,#220797,#220799,.T.); +#220797 = VERTEX_POINT('',#220798); +#220798 = CARTESIAN_POINT('',(199.376175,-63.263178,1.585)); +#220799 = LINE('',#220800,#220801); +#220800 = CARTESIAN_POINT('',(199.199055,-63.203648,1.585)); +#220801 = VECTOR('',#220802,1.); +#220802 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#220803 = ORIENTED_EDGE('',*,*,#220804,.T.); +#220804 = EDGE_CURVE('',#220797,#220805,#220807,.T.); +#220805 = VERTEX_POINT('',#220806); +#220806 = CARTESIAN_POINT('',(199.492864,-63.38094,1.585)); +#220807 = LINE('',#220808,#220809); +#220808 = CARTESIAN_POINT('',(199.376175,-63.263178,1.585)); +#220809 = VECTOR('',#220810,1.); +#220810 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#220811 = ORIENTED_EDGE('',*,*,#220812,.T.); +#220812 = EDGE_CURVE('',#220805,#220813,#220815,.T.); +#220813 = VERTEX_POINT('',#220814); +#220814 = CARTESIAN_POINT('',(199.550125,-63.497824,1.585)); +#220815 = LINE('',#220816,#220817); +#220816 = CARTESIAN_POINT('',(199.492864,-63.38094,1.585)); +#220817 = VECTOR('',#220818,1.); +#220818 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#220819 = ORIENTED_EDGE('',*,*,#220820,.T.); +#220820 = EDGE_CURVE('',#220813,#220821,#220823,.T.); +#220821 = VERTEX_POINT('',#220822); +#220822 = CARTESIAN_POINT('',(199.599983,-63.70649,1.585)); +#220823 = LINE('',#220824,#220825); +#220824 = CARTESIAN_POINT('',(199.550125,-63.497824,1.585)); +#220825 = VECTOR('',#220826,1.); +#220826 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#220827 = ORIENTED_EDGE('',*,*,#220828,.T.); +#220828 = EDGE_CURVE('',#220821,#220829,#220831,.T.); +#220829 = VERTEX_POINT('',#220830); +#220830 = CARTESIAN_POINT('',(199.597744,-63.867537,1.585)); +#220831 = LINE('',#220832,#220833); +#220832 = CARTESIAN_POINT('',(199.599983,-63.70649,1.585)); +#220833 = VECTOR('',#220834,1.); +#220834 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#220835 = ORIENTED_EDGE('',*,*,#220836,.T.); +#220836 = EDGE_CURVE('',#220829,#220837,#220839,.T.); +#220837 = VERTEX_POINT('',#220838); +#220838 = CARTESIAN_POINT('',(199.544446,-64.073364,1.585)); +#220839 = LINE('',#220840,#220841); +#220840 = CARTESIAN_POINT('',(199.597744,-63.867537,1.585)); +#220841 = VECTOR('',#220842,1.); +#220842 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#220843 = ORIENTED_EDGE('',*,*,#220844,.T.); +#220844 = EDGE_CURVE('',#220837,#220845,#220847,.T.); +#220845 = VERTEX_POINT('',#220846); +#220846 = CARTESIAN_POINT('',(199.487496,-64.182344,1.585)); +#220847 = LINE('',#220848,#220849); +#220848 = CARTESIAN_POINT('',(199.544446,-64.073364,1.585)); +#220849 = VECTOR('',#220850,1.); +#220850 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#220851 = ORIENTED_EDGE('',*,*,#220852,.T.); +#220852 = EDGE_CURVE('',#220845,#220853,#220855,.T.); +#220853 = VERTEX_POINT('',#220854); +#220854 = CARTESIAN_POINT('',(199.371649,-64.295457,1.585)); +#220855 = LINE('',#220856,#220857); +#220856 = CARTESIAN_POINT('',(199.487496,-64.182344,1.585)); +#220857 = VECTOR('',#220858,1.); +#220858 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#220859 = ORIENTED_EDGE('',*,*,#220860,.T.); +#220860 = EDGE_CURVE('',#220853,#220861,#220863,.T.); +#220861 = VERTEX_POINT('',#220862); +#220862 = CARTESIAN_POINT('',(199.199055,-64.352189,1.585)); +#220863 = LINE('',#220864,#220865); +#220864 = CARTESIAN_POINT('',(199.371649,-64.295457,1.585)); +#220865 = VECTOR('',#220866,1.); +#220866 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#220867 = ORIENTED_EDGE('',*,*,#220868,.T.); +#220868 = EDGE_CURVE('',#220861,#220869,#220871,.T.); +#220869 = VERTEX_POINT('',#220870); +#220870 = CARTESIAN_POINT('',(198.938923,-64.351478,1.585)); +#220871 = LINE('',#220872,#220873); +#220872 = CARTESIAN_POINT('',(199.199055,-64.352189,1.585)); +#220873 = VECTOR('',#220874,1.); +#220874 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#220875 = ORIENTED_EDGE('',*,*,#220876,.T.); +#220876 = EDGE_CURVE('',#220869,#220877,#220879,.T.); +#220877 = VERTEX_POINT('',#220878); +#220878 = CARTESIAN_POINT('',(198.878555,-64.277919,1.585)); +#220879 = CIRCLE('',#220880,7.500074938991E-02); +#220880 = AXIS2_PLACEMENT_3D('',#220881,#220882,#220883); +#220881 = CARTESIAN_POINT('',(198.95355574938,-64.27791853389,1.585)); +#220882 = DIRECTION('',(0.,0.,-1.)); +#220883 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#220884 = ORIENTED_EDGE('',*,*,#220885,.T.); +#220885 = EDGE_CURVE('',#220877,#220778,#220886,.T.); +#220886 = LINE('',#220887,#220888); +#220887 = CARTESIAN_POINT('',(198.878555,-64.277919,1.585)); +#220888 = VECTOR('',#220889,1.); +#220889 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#220890 = FACE_BOUND('',#220891,.F.); +#220891 = EDGE_LOOP('',(#220892,#220902,#220910,#220918,#220926,#220934, + #220942,#220951,#220959,#220967)); +#220892 = ORIENTED_EDGE('',*,*,#220893,.T.); +#220893 = EDGE_CURVE('',#220894,#220896,#220898,.T.); +#220894 = VERTEX_POINT('',#220895); +#220895 = CARTESIAN_POINT('',(199.293993,-63.39109,1.585)); +#220896 = VERTEX_POINT('',#220897); +#220897 = CARTESIAN_POINT('',(199.17948,-63.352919,1.585)); +#220898 = LINE('',#220899,#220900); +#220899 = CARTESIAN_POINT('',(199.293993,-63.39109,1.585)); +#220900 = VECTOR('',#220901,1.); +#220901 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#220902 = ORIENTED_EDGE('',*,*,#220903,.T.); +#220903 = EDGE_CURVE('',#220896,#220904,#220906,.T.); +#220904 = VERTEX_POINT('',#220905); +#220905 = CARTESIAN_POINT('',(199.028555,-63.352919,1.585)); +#220906 = LINE('',#220907,#220908); +#220907 = CARTESIAN_POINT('',(199.17948,-63.352919,1.585)); +#220908 = VECTOR('',#220909,1.); +#220909 = DIRECTION('',(-1.,0.,0.)); +#220910 = ORIENTED_EDGE('',*,*,#220911,.T.); +#220911 = EDGE_CURVE('',#220904,#220912,#220914,.T.); +#220912 = VERTEX_POINT('',#220913); +#220913 = CARTESIAN_POINT('',(199.028555,-64.202919,1.585)); +#220914 = LINE('',#220915,#220916); +#220915 = CARTESIAN_POINT('',(199.028555,-63.352919,1.585)); +#220916 = VECTOR('',#220917,1.); +#220917 = DIRECTION('',(0.,-1.,0.)); +#220918 = ORIENTED_EDGE('',*,*,#220919,.T.); +#220919 = EDGE_CURVE('',#220912,#220920,#220922,.T.); +#220920 = VERTEX_POINT('',#220921); +#220921 = CARTESIAN_POINT('',(199.17948,-64.202919,1.585)); +#220922 = LINE('',#220923,#220924); +#220923 = CARTESIAN_POINT('',(199.028555,-64.202919,1.585)); +#220924 = VECTOR('',#220925,1.); +#220925 = DIRECTION('',(1.,0.,0.)); +#220926 = ORIENTED_EDGE('',*,*,#220927,.T.); +#220927 = EDGE_CURVE('',#220920,#220928,#220930,.T.); +#220928 = VERTEX_POINT('',#220929); +#220929 = CARTESIAN_POINT('',(199.293993,-64.164747,1.585)); +#220930 = LINE('',#220931,#220932); +#220931 = CARTESIAN_POINT('',(199.17948,-64.202919,1.585)); +#220932 = VECTOR('',#220933,1.); +#220933 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#220934 = ORIENTED_EDGE('',*,*,#220935,.T.); +#220935 = EDGE_CURVE('',#220928,#220936,#220938,.T.); +#220936 = VERTEX_POINT('',#220937); +#220937 = CARTESIAN_POINT('',(199.368105,-64.090634,1.585)); +#220938 = LINE('',#220939,#220940); +#220939 = CARTESIAN_POINT('',(199.293993,-64.164747,1.585)); +#220940 = VECTOR('',#220941,1.); +#220941 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#220942 = ORIENTED_EDGE('',*,*,#220943,.T.); +#220943 = EDGE_CURVE('',#220936,#220944,#220946,.T.); +#220944 = VERTEX_POINT('',#220945); +#220945 = CARTESIAN_POINT('',(199.449983,-63.715724,1.585)); +#220946 = CIRCLE('',#220947,0.611719141131); +#220947 = AXIS2_PLACEMENT_3D('',#220948,#220949,#220950); +#220948 = CARTESIAN_POINT('',(198.84157096224,-63.77924643649,1.585)); +#220949 = DIRECTION('',(0.,0.,1.)); +#220950 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#220951 = ORIENTED_EDGE('',*,*,#220952,.T.); +#220952 = EDGE_CURVE('',#220944,#220953,#220955,.T.); +#220953 = VERTEX_POINT('',#220954); +#220954 = CARTESIAN_POINT('',(199.406599,-63.54219,1.585)); +#220955 = LINE('',#220956,#220957); +#220956 = CARTESIAN_POINT('',(199.449983,-63.715724,1.585)); +#220957 = VECTOR('',#220958,1.); +#220958 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#220959 = ORIENTED_EDGE('',*,*,#220960,.T.); +#220960 = EDGE_CURVE('',#220953,#220961,#220963,.T.); +#220961 = VERTEX_POINT('',#220962); +#220962 = CARTESIAN_POINT('',(199.368106,-63.465203,1.585)); +#220963 = LINE('',#220964,#220965); +#220964 = CARTESIAN_POINT('',(199.406599,-63.54219,1.585)); +#220965 = VECTOR('',#220966,1.); +#220966 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#220967 = ORIENTED_EDGE('',*,*,#220968,.T.); +#220968 = EDGE_CURVE('',#220961,#220894,#220969,.T.); +#220969 = LINE('',#220970,#220971); +#220970 = CARTESIAN_POINT('',(199.368106,-63.465203,1.585)); +#220971 = VECTOR('',#220972,1.); +#220972 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220973 = PLANE('',#220974); +#220974 = AXIS2_PLACEMENT_3D('',#220975,#220976,#220977); +#220975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#220976 = DIRECTION('',(0.,0.,1.)); +#220977 = DIRECTION('',(1.,0.,-0.)); +#220978 = SHELL_BASED_SURFACE_MODEL('',(#220979)); +#220979 = OPEN_SHELL('',(#220980)); +#220980 = ADVANCED_FACE('',(#220981,#221124),#221194,.T.); +#220981 = FACE_BOUND('',#220982,.F.); +#220982 = EDGE_LOOP('',(#220983,#220994,#221002,#221010,#221019,#221027, + #221035,#221043,#221051,#221059,#221067,#221075,#221084,#221092, + #221101,#221109,#221118)); +#220983 = ORIENTED_EDGE('',*,*,#220984,.T.); +#220984 = EDGE_CURVE('',#220985,#220987,#220989,.T.); +#220985 = VERTEX_POINT('',#220986); +#220986 = CARTESIAN_POINT('',(199.833175,-63.6883,1.585)); +#220987 = VERTEX_POINT('',#220988); +#220988 = CARTESIAN_POINT('',(200.062871,-63.258456,1.585)); +#220989 = CIRCLE('',#220990,0.610092147705); +#220990 = AXIS2_PLACEMENT_3D('',#220991,#220992,#220993); +#220991 = CARTESIAN_POINT('',(200.44132174024,-63.73698234817,1.585)); +#220992 = DIRECTION('',(0.,0.,-1.)); +#220993 = DIRECTION('',(-0.99681128913,7.979507417357E-02,0.)); +#220994 = ORIENTED_EDGE('',*,*,#220995,.T.); +#220995 = EDGE_CURVE('',#220987,#220996,#220998,.T.); +#220996 = VERTEX_POINT('',#220997); +#220997 = CARTESIAN_POINT('',(200.177018,-63.20436,1.585)); +#220998 = LINE('',#220999,#221000); +#220999 = CARTESIAN_POINT('',(200.062871,-63.258456,1.585)); +#221000 = VECTOR('',#221001,1.); +#221001 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#221002 = ORIENTED_EDGE('',*,*,#221003,.T.); +#221003 = EDGE_CURVE('',#220996,#221004,#221006,.T.); +#221004 = VERTEX_POINT('',#221005); +#221005 = CARTESIAN_POINT('',(200.396758,-63.20436,1.585)); +#221006 = LINE('',#221007,#221008); +#221007 = CARTESIAN_POINT('',(200.177018,-63.20436,1.585)); +#221008 = VECTOR('',#221009,1.); +#221009 = DIRECTION('',(1.,0.,0.)); +#221010 = ORIENTED_EDGE('',*,*,#221011,.T.); +#221011 = EDGE_CURVE('',#221004,#221012,#221014,.T.); +#221012 = VERTEX_POINT('',#221013); +#221013 = CARTESIAN_POINT('',(200.382126,-63.352919,1.585)); +#221014 = CIRCLE('',#221015,7.500006711464E-02); +#221015 = AXIS2_PLACEMENT_3D('',#221016,#221017,#221018); +#221016 = CARTESIAN_POINT('',(200.38212606711,-63.27791893288,1.585)); +#221017 = DIRECTION('',(0.,0.,-1.)); +#221018 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#221019 = ORIENTED_EDGE('',*,*,#221020,.T.); +#221020 = EDGE_CURVE('',#221012,#221021,#221023,.T.); +#221021 = VERTEX_POINT('',#221022); +#221022 = CARTESIAN_POINT('',(200.209355,-63.352919,1.585)); +#221023 = LINE('',#221024,#221025); +#221024 = CARTESIAN_POINT('',(200.382126,-63.352919,1.585)); +#221025 = VECTOR('',#221026,1.); +#221026 = DIRECTION('',(-1.,0.,0.)); +#221027 = ORIENTED_EDGE('',*,*,#221028,.T.); +#221028 = EDGE_CURVE('',#221021,#221029,#221031,.T.); +#221029 = VERTEX_POINT('',#221030); +#221030 = CARTESIAN_POINT('',(200.140839,-63.387177,1.585)); +#221031 = LINE('',#221032,#221033); +#221032 = CARTESIAN_POINT('',(200.209355,-63.352919,1.585)); +#221033 = VECTOR('',#221034,1.); +#221034 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#221035 = ORIENTED_EDGE('',*,*,#221036,.T.); +#221036 = EDGE_CURVE('',#221029,#221037,#221039,.T.); +#221037 = VERTEX_POINT('',#221038); +#221038 = CARTESIAN_POINT('',(200.107077,-63.420938,1.585)); +#221039 = LINE('',#221040,#221041); +#221040 = CARTESIAN_POINT('',(200.140839,-63.387177,1.585)); +#221041 = VECTOR('',#221042,1.); +#221042 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#221043 = ORIENTED_EDGE('',*,*,#221044,.T.); +#221044 = EDGE_CURVE('',#221037,#221045,#221047,.T.); +#221045 = VERTEX_POINT('',#221046); +#221046 = CARTESIAN_POINT('',(200.023165,-63.546807,1.585)); +#221047 = LINE('',#221048,#221049); +#221048 = CARTESIAN_POINT('',(200.107077,-63.420938,1.585)); +#221049 = VECTOR('',#221050,1.); +#221050 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#221051 = ORIENTED_EDGE('',*,*,#221052,.T.); +#221052 = EDGE_CURVE('',#221045,#221053,#221055,.T.); +#221053 = VERTEX_POINT('',#221054); +#221054 = CARTESIAN_POINT('',(200.004641,-63.620904,1.585)); +#221055 = LINE('',#221056,#221057); +#221056 = CARTESIAN_POINT('',(200.023165,-63.546807,1.585)); +#221057 = VECTOR('',#221058,1.); +#221058 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#221059 = ORIENTED_EDGE('',*,*,#221060,.T.); +#221060 = EDGE_CURVE('',#221053,#221061,#221063,.T.); +#221061 = VERTEX_POINT('',#221062); +#221062 = CARTESIAN_POINT('',(200.08178,-63.585312,1.585)); +#221063 = LINE('',#221064,#221065); +#221064 = CARTESIAN_POINT('',(200.004641,-63.620904,1.585)); +#221065 = VECTOR('',#221066,1.); +#221066 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#221067 = ORIENTED_EDGE('',*,*,#221068,.T.); +#221068 = EDGE_CURVE('',#221061,#221069,#221071,.T.); +#221069 = VERTEX_POINT('',#221070); +#221070 = CARTESIAN_POINT('',(200.306697,-63.586534,1.585)); +#221071 = LINE('',#221072,#221073); +#221072 = CARTESIAN_POINT('',(200.08178,-63.585312,1.585)); +#221073 = VECTOR('',#221074,1.); +#221074 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#221075 = ORIENTED_EDGE('',*,*,#221076,.T.); +#221076 = EDGE_CURVE('',#221069,#221077,#221079,.T.); +#221077 = VERTEX_POINT('',#221078); +#221078 = CARTESIAN_POINT('',(200.550923,-63.834715,1.585)); +#221079 = CIRCLE('',#221080,0.348625649748); +#221080 = AXIS2_PLACEMENT_3D('',#221081,#221082,#221083); +#221081 = CARTESIAN_POINT('',(200.21352504586,-63.92247868387,1.585)); +#221082 = DIRECTION('',(0.,0.,-1.)); +#221083 = DIRECTION('',(0.267255017532,0.96362583797,0.)); +#221084 = ORIENTED_EDGE('',*,*,#221085,.T.); +#221085 = EDGE_CURVE('',#221077,#221086,#221088,.T.); +#221086 = VERTEX_POINT('',#221087); +#221087 = CARTESIAN_POINT('',(200.549701,-64.107252,1.585)); +#221088 = LINE('',#221089,#221090); +#221089 = CARTESIAN_POINT('',(200.550923,-63.834715,1.585)); +#221090 = VECTOR('',#221091,1.); +#221091 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#221092 = ORIENTED_EDGE('',*,*,#221093,.T.); +#221093 = EDGE_CURVE('',#221086,#221094,#221096,.T.); +#221094 = VERTEX_POINT('',#221095); +#221095 = CARTESIAN_POINT('',(200.30152,-64.351478,1.585)); +#221096 = CIRCLE('',#221097,0.348635327447); +#221097 = AXIS2_PLACEMENT_3D('',#221098,#221099,#221100); +#221098 = CARTESIAN_POINT('',(200.21374848129,-64.01407208415,1.585)); +#221099 = DIRECTION('',(0.,0.,-1.)); +#221100 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#221101 = ORIENTED_EDGE('',*,*,#221102,.T.); +#221102 = EDGE_CURVE('',#221094,#221103,#221105,.T.); +#221103 = VERTEX_POINT('',#221104); +#221104 = CARTESIAN_POINT('',(200.076602,-64.350256,1.585)); +#221105 = LINE('',#221106,#221107); +#221106 = CARTESIAN_POINT('',(200.30152,-64.351478,1.585)); +#221107 = VECTOR('',#221108,1.); +#221108 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#221109 = ORIENTED_EDGE('',*,*,#221110,.T.); +#221110 = EDGE_CURVE('',#221103,#221111,#221113,.T.); +#221111 = VERTEX_POINT('',#221112); +#221112 = CARTESIAN_POINT('',(199.832377,-64.102074,1.585)); +#221113 = CIRCLE('',#221114,0.348628446662); +#221114 = AXIS2_PLACEMENT_3D('',#221115,#221116,#221117); +#221115 = CARTESIAN_POINT('',(200.16977761322,-64.01430942847,1.585)); +#221116 = DIRECTION('',(0.,0.,-1.)); +#221117 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#221118 = ORIENTED_EDGE('',*,*,#221119,.T.); +#221119 = EDGE_CURVE('',#221111,#220985,#221120,.T.); +#221120 = LINE('',#221121,#221122); +#221121 = CARTESIAN_POINT('',(199.832377,-64.102074,1.585)); +#221122 = VECTOR('',#221123,1.); +#221123 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#221124 = FACE_BOUND('',#221125,.F.); +#221125 = EDGE_LOOP('',(#221126,#221137,#221145,#221154,#221162,#221171, + #221179,#221188)); +#221126 = ORIENTED_EDGE('',*,*,#221127,.T.); +#221127 = EDGE_CURVE('',#221128,#221130,#221132,.T.); +#221128 = VERTEX_POINT('',#221129); +#221129 = CARTESIAN_POINT('',(200.337699,-63.768129,1.585)); +#221130 = VERTEX_POINT('',#221131); +#221131 = CARTESIAN_POINT('',(200.045601,-63.768129,1.585)); +#221132 = CIRCLE('',#221133,0.252889603602); +#221133 = AXIS2_PLACEMENT_3D('',#221134,#221135,#221136); +#221134 = CARTESIAN_POINT('',(200.19165,-63.974582,1.585)); +#221135 = DIRECTION('',(0.,0.,1.)); +#221136 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#221137 = ORIENTED_EDGE('',*,*,#221138,.T.); +#221138 = EDGE_CURVE('',#221130,#221139,#221141,.T.); +#221139 = VERTEX_POINT('',#221140); +#221140 = CARTESIAN_POINT('',(200.015194,-63.798536,1.585)); +#221141 = LINE('',#221142,#221143); +#221142 = CARTESIAN_POINT('',(200.045601,-63.768129,1.585)); +#221143 = VECTOR('',#221144,1.); +#221144 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221145 = ORIENTED_EDGE('',*,*,#221146,.T.); +#221146 = EDGE_CURVE('',#221139,#221147,#221149,.T.); +#221147 = VERTEX_POINT('',#221148); +#221148 = CARTESIAN_POINT('',(200.015194,-64.138253,1.585)); +#221149 = CIRCLE('',#221150,0.305621483548); +#221150 = AXIS2_PLACEMENT_3D('',#221151,#221152,#221153); +#221151 = CARTESIAN_POINT('',(200.269266,-63.9683945,1.585)); +#221152 = DIRECTION('',(0.,0.,1.)); +#221153 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#221154 = ORIENTED_EDGE('',*,*,#221155,.T.); +#221155 = EDGE_CURVE('',#221147,#221156,#221158,.T.); +#221156 = VERTEX_POINT('',#221157); +#221157 = CARTESIAN_POINT('',(200.045601,-64.168661,1.585)); +#221158 = LINE('',#221159,#221160); +#221159 = CARTESIAN_POINT('',(200.015194,-64.138253,1.585)); +#221160 = VECTOR('',#221161,1.); +#221161 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#221162 = ORIENTED_EDGE('',*,*,#221163,.T.); +#221163 = EDGE_CURVE('',#221156,#221164,#221166,.T.); +#221164 = VERTEX_POINT('',#221165); +#221165 = CARTESIAN_POINT('',(200.337698,-64.168661,1.585)); +#221166 = CIRCLE('',#221167,0.252888498466); +#221167 = AXIS2_PLACEMENT_3D('',#221168,#221169,#221170); +#221168 = CARTESIAN_POINT('',(200.1916495,-63.962209,1.585)); +#221169 = DIRECTION('',(0.,0.,1.)); +#221170 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#221171 = ORIENTED_EDGE('',*,*,#221172,.T.); +#221172 = EDGE_CURVE('',#221164,#221173,#221175,.T.); +#221173 = VERTEX_POINT('',#221174); +#221174 = CARTESIAN_POINT('',(200.368105,-64.138253,1.585)); +#221175 = LINE('',#221176,#221177); +#221176 = CARTESIAN_POINT('',(200.337698,-64.168661,1.585)); +#221177 = VECTOR('',#221178,1.); +#221178 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#221179 = ORIENTED_EDGE('',*,*,#221180,.T.); +#221180 = EDGE_CURVE('',#221173,#221181,#221183,.T.); +#221181 = VERTEX_POINT('',#221182); +#221182 = CARTESIAN_POINT('',(200.368106,-63.798536,1.585)); +#221183 = CIRCLE('',#221184,0.305616146029); +#221184 = AXIS2_PLACEMENT_3D('',#221185,#221186,#221187); +#221185 = CARTESIAN_POINT('',(200.11403992049,-63.96839375212,1.585)); +#221186 = DIRECTION('',(0.,-0.,1.)); +#221187 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#221188 = ORIENTED_EDGE('',*,*,#221189,.T.); +#221189 = EDGE_CURVE('',#221181,#221128,#221190,.T.); +#221190 = LINE('',#221191,#221192); +#221191 = CARTESIAN_POINT('',(200.368106,-63.798536,1.585)); +#221192 = VECTOR('',#221193,1.); +#221193 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#221194 = PLANE('',#221195); +#221195 = AXIS2_PLACEMENT_3D('',#221196,#221197,#221198); +#221196 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221197 = DIRECTION('',(0.,0.,1.)); +#221198 = DIRECTION('',(1.,0.,-0.)); +#221199 = SHELL_BASED_SURFACE_MODEL('',(#221200)); +#221200 = OPEN_SHELL('',(#221201)); +#221201 = ADVANCED_FACE('',(#221202),#221288,.T.); +#221202 = FACE_BOUND('',#221203,.F.); +#221203 = EDGE_LOOP('',(#221204,#221215,#221223,#221232,#221240,#221248, + #221256,#221265,#221273,#221282)); +#221204 = ORIENTED_EDGE('',*,*,#221205,.T.); +#221205 = EDGE_CURVE('',#221206,#221208,#221210,.T.); +#221206 = VERTEX_POINT('',#221207); +#221207 = CARTESIAN_POINT('',(87.47165,-59.6731,1.585)); +#221208 = VERTEX_POINT('',#221209); +#221209 = CARTESIAN_POINT('',(87.53165,-59.6131,1.585)); +#221210 = CIRCLE('',#221211,5.999932016263E-02); +#221211 = AXIS2_PLACEMENT_3D('',#221212,#221213,#221214); +#221212 = CARTESIAN_POINT('',(87.531649320159,-59.67309932015,1.585)); +#221213 = DIRECTION('',(0.,0.,-1.)); +#221214 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#221215 = ORIENTED_EDGE('',*,*,#221216,.T.); +#221216 = EDGE_CURVE('',#221208,#221217,#221219,.T.); +#221217 = VERTEX_POINT('',#221218); +#221218 = CARTESIAN_POINT('',(93.34165,-59.6131,1.585)); +#221219 = LINE('',#221220,#221221); +#221220 = CARTESIAN_POINT('',(87.53165,-59.6131,1.585)); +#221221 = VECTOR('',#221222,1.); +#221222 = DIRECTION('',(1.,0.,0.)); +#221223 = ORIENTED_EDGE('',*,*,#221224,.T.); +#221224 = EDGE_CURVE('',#221217,#221225,#221227,.T.); +#221225 = VERTEX_POINT('',#221226); +#221226 = CARTESIAN_POINT('',(93.34165,-59.7331,1.585)); +#221227 = CIRCLE('',#221228,6.000000000042E-02); +#221228 = AXIS2_PLACEMENT_3D('',#221229,#221230,#221231); +#221229 = CARTESIAN_POINT('',(93.341650225588,-59.6731,1.585)); +#221230 = DIRECTION('',(0.,0.,-1.)); +#221231 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#221232 = ORIENTED_EDGE('',*,*,#221233,.T.); +#221233 = EDGE_CURVE('',#221225,#221234,#221236,.T.); +#221234 = VERTEX_POINT('',#221235); +#221235 = CARTESIAN_POINT('',(87.59165,-59.7331,1.585)); +#221236 = LINE('',#221237,#221238); +#221237 = CARTESIAN_POINT('',(93.34165,-59.7331,1.585)); +#221238 = VECTOR('',#221239,1.); +#221239 = DIRECTION('',(-1.,0.,0.)); +#221240 = ORIENTED_EDGE('',*,*,#221241,.T.); +#221241 = EDGE_CURVE('',#221234,#221242,#221244,.T.); +#221242 = VERTEX_POINT('',#221243); +#221243 = CARTESIAN_POINT('',(87.59165,-63.9131,1.585)); +#221244 = LINE('',#221245,#221246); +#221245 = CARTESIAN_POINT('',(87.59165,-59.7331,1.585)); +#221246 = VECTOR('',#221247,1.); +#221247 = DIRECTION('',(0.,-1.,0.)); +#221248 = ORIENTED_EDGE('',*,*,#221249,.T.); +#221249 = EDGE_CURVE('',#221242,#221250,#221252,.T.); +#221250 = VERTEX_POINT('',#221251); +#221251 = CARTESIAN_POINT('',(93.34165,-63.9131,1.585)); +#221252 = LINE('',#221253,#221254); +#221253 = CARTESIAN_POINT('',(87.59165,-63.9131,1.585)); +#221254 = VECTOR('',#221255,1.); +#221255 = DIRECTION('',(1.,0.,0.)); +#221256 = ORIENTED_EDGE('',*,*,#221257,.T.); +#221257 = EDGE_CURVE('',#221250,#221258,#221260,.T.); +#221258 = VERTEX_POINT('',#221259); +#221259 = CARTESIAN_POINT('',(93.34165,-64.0331,1.585)); +#221260 = CIRCLE('',#221261,6.000000000043E-02); +#221261 = AXIS2_PLACEMENT_3D('',#221262,#221263,#221264); +#221262 = CARTESIAN_POINT('',(93.341650225588,-63.9731,1.585)); +#221263 = DIRECTION('',(0.,0.,-1.)); +#221264 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#221265 = ORIENTED_EDGE('',*,*,#221266,.T.); +#221266 = EDGE_CURVE('',#221258,#221267,#221269,.T.); +#221267 = VERTEX_POINT('',#221268); +#221268 = CARTESIAN_POINT('',(87.53165,-64.0331,1.585)); +#221269 = LINE('',#221270,#221271); +#221270 = CARTESIAN_POINT('',(93.34165,-64.0331,1.585)); +#221271 = VECTOR('',#221272,1.); +#221272 = DIRECTION('',(-1.,0.,0.)); +#221273 = ORIENTED_EDGE('',*,*,#221274,.T.); +#221274 = EDGE_CURVE('',#221267,#221275,#221277,.T.); +#221275 = VERTEX_POINT('',#221276); +#221276 = CARTESIAN_POINT('',(87.47165,-63.9731,1.585)); +#221277 = CIRCLE('',#221278,5.999932016264E-02); +#221278 = AXIS2_PLACEMENT_3D('',#221279,#221280,#221281); +#221279 = CARTESIAN_POINT('',(87.531649320159,-63.97310067984,1.585)); +#221280 = DIRECTION('',(0.,0.,-1.)); +#221281 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#221282 = ORIENTED_EDGE('',*,*,#221283,.T.); +#221283 = EDGE_CURVE('',#221275,#221206,#221284,.T.); +#221284 = LINE('',#221285,#221286); +#221285 = CARTESIAN_POINT('',(87.47165,-63.9731,1.585)); +#221286 = VECTOR('',#221287,1.); +#221287 = DIRECTION('',(0.,1.,0.)); +#221288 = PLANE('',#221289); +#221289 = AXIS2_PLACEMENT_3D('',#221290,#221291,#221292); +#221290 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221291 = DIRECTION('',(0.,0.,1.)); +#221292 = DIRECTION('',(1.,0.,-0.)); +#221293 = SHELL_BASED_SURFACE_MODEL('',(#221294)); +#221294 = OPEN_SHELL('',(#221295)); +#221295 = ADVANCED_FACE('',(#221296,#221484),#221618,.T.); +#221296 = FACE_BOUND('',#221297,.F.); +#221297 = EDGE_LOOP('',(#221298,#221309,#221317,#221325,#221333,#221341, + #221349,#221357,#221365,#221373,#221381,#221390,#221398,#221406, + #221414,#221422,#221430,#221438,#221446,#221454,#221462,#221470, + #221478)); +#221298 = ORIENTED_EDGE('',*,*,#221299,.T.); +#221299 = EDGE_CURVE('',#221300,#221302,#221304,.T.); +#221300 = VERTEX_POINT('',#221301); +#221301 = CARTESIAN_POINT('',(138.043497,-62.789318,1.585)); +#221302 = VERTEX_POINT('',#221303); +#221303 = CARTESIAN_POINT('',(138.511568,-62.794686,1.585)); +#221304 = CIRCLE('',#221305,0.397578964435); +#221305 = AXIS2_PLACEMENT_3D('',#221306,#221307,#221308); +#221306 = CARTESIAN_POINT('',(138.27384697212,-63.11336726061,1.585)); +#221307 = DIRECTION('',(0.,0.,-1.)); +#221308 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#221309 = ORIENTED_EDGE('',*,*,#221310,.T.); +#221310 = EDGE_CURVE('',#221302,#221311,#221313,.T.); +#221311 = VERTEX_POINT('',#221312); +#221312 = CARTESIAN_POINT('',(138.621884,-62.906008,1.585)); +#221313 = LINE('',#221314,#221315); +#221314 = CARTESIAN_POINT('',(138.511568,-62.794686,1.585)); +#221315 = VECTOR('',#221316,1.); +#221316 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#221317 = ORIENTED_EDGE('',*,*,#221318,.T.); +#221318 = EDGE_CURVE('',#221311,#221319,#221321,.T.); +#221319 = VERTEX_POINT('',#221320); +#221320 = CARTESIAN_POINT('',(138.632284,-62.929486,1.585)); +#221321 = LINE('',#221322,#221323); +#221322 = CARTESIAN_POINT('',(138.621884,-62.906008,1.585)); +#221323 = VECTOR('',#221324,1.); +#221324 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#221325 = ORIENTED_EDGE('',*,*,#221326,.T.); +#221326 = EDGE_CURVE('',#221319,#221327,#221329,.T.); +#221327 = VERTEX_POINT('',#221328); +#221328 = CARTESIAN_POINT('',(138.682142,-63.138152,1.585)); +#221329 = LINE('',#221330,#221331); +#221330 = CARTESIAN_POINT('',(138.632284,-62.929486,1.585)); +#221331 = VECTOR('',#221332,1.); +#221332 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#221333 = ORIENTED_EDGE('',*,*,#221334,.T.); +#221334 = EDGE_CURVE('',#221327,#221335,#221337,.T.); +#221335 = VERTEX_POINT('',#221336); +#221336 = CARTESIAN_POINT('',(138.679903,-63.489675,1.585)); +#221337 = LINE('',#221338,#221339); +#221338 = CARTESIAN_POINT('',(138.682142,-63.138152,1.585)); +#221339 = VECTOR('',#221340,1.); +#221340 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#221341 = ORIENTED_EDGE('',*,*,#221342,.T.); +#221342 = EDGE_CURVE('',#221335,#221343,#221345,.T.); +#221343 = VERTEX_POINT('',#221344); +#221344 = CARTESIAN_POINT('',(138.627337,-63.693997,1.585)); +#221345 = LINE('',#221346,#221347); +#221346 = CARTESIAN_POINT('',(138.679903,-63.489675,1.585)); +#221347 = VECTOR('',#221348,1.); +#221348 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#221349 = ORIENTED_EDGE('',*,*,#221350,.T.); +#221350 = EDGE_CURVE('',#221343,#221351,#221353,.T.); +#221351 = VERTEX_POINT('',#221352); +#221352 = CARTESIAN_POINT('',(138.612557,-63.714993,1.585)); +#221353 = LINE('',#221354,#221355); +#221354 = CARTESIAN_POINT('',(138.627337,-63.693997,1.585)); +#221355 = VECTOR('',#221356,1.); +#221356 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#221357 = ORIENTED_EDGE('',*,*,#221358,.T.); +#221358 = EDGE_CURVE('',#221351,#221359,#221361,.T.); +#221359 = VERTEX_POINT('',#221360); +#221360 = CARTESIAN_POINT('',(138.57035,-63.757199,1.585)); +#221361 = LINE('',#221362,#221363); +#221362 = CARTESIAN_POINT('',(138.612557,-63.714993,1.585)); +#221363 = VECTOR('',#221364,1.); +#221364 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#221365 = ORIENTED_EDGE('',*,*,#221366,.T.); +#221366 = EDGE_CURVE('',#221359,#221367,#221369,.T.); +#221367 = VERTEX_POINT('',#221368); +#221368 = CARTESIAN_POINT('',(138.60395,-63.790799,1.585)); +#221369 = LINE('',#221370,#221371); +#221370 = CARTESIAN_POINT('',(138.57035,-63.757199,1.585)); +#221371 = VECTOR('',#221372,1.); +#221372 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#221373 = ORIENTED_EDGE('',*,*,#221374,.T.); +#221374 = EDGE_CURVE('',#221367,#221375,#221377,.T.); +#221375 = VERTEX_POINT('',#221376); +#221376 = CARTESIAN_POINT('',(138.700745,-63.840807,1.585)); +#221377 = LINE('',#221378,#221379); +#221378 = CARTESIAN_POINT('',(138.60395,-63.790799,1.585)); +#221379 = VECTOR('',#221380,1.); +#221380 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#221381 = ORIENTED_EDGE('',*,*,#221382,.T.); +#221382 = EDGE_CURVE('',#221375,#221383,#221385,.T.); +#221383 = VERTEX_POINT('',#221384); +#221384 = CARTESIAN_POINT('',(138.62122,-63.967139,1.585)); +#221385 = CIRCLE('',#221386,7.500029440362E-02); +#221386 = AXIS2_PLACEMENT_3D('',#221387,#221388,#221389); +#221387 = CARTESIAN_POINT('',(138.65476105397,-63.90005664867,1.585)); +#221388 = DIRECTION('',(0.,0.,-1.)); +#221389 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#221390 = ORIENTED_EDGE('',*,*,#221391,.T.); +#221391 = EDGE_CURVE('',#221383,#221392,#221394,.T.); +#221392 = VERTEX_POINT('',#221393); +#221393 = CARTESIAN_POINT('',(138.51224,-63.910191,1.585)); +#221394 = LINE('',#221395,#221396); +#221395 = CARTESIAN_POINT('',(138.62122,-63.967139,1.585)); +#221396 = VECTOR('',#221397,1.); +#221397 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#221398 = ORIENTED_EDGE('',*,*,#221399,.T.); +#221399 = EDGE_CURVE('',#221392,#221400,#221402,.T.); +#221400 = VERTEX_POINT('',#221401); +#221401 = CARTESIAN_POINT('',(138.449476,-63.848457,1.585)); +#221402 = LINE('',#221403,#221404); +#221403 = CARTESIAN_POINT('',(138.51224,-63.910191,1.585)); +#221404 = VECTOR('',#221405,1.); +#221405 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#221406 = ORIENTED_EDGE('',*,*,#221407,.T.); +#221407 = EDGE_CURVE('',#221400,#221408,#221410,.T.); +#221408 = VERTEX_POINT('',#221409); +#221409 = CARTESIAN_POINT('',(138.383679,-63.878378,1.585)); +#221410 = LINE('',#221411,#221412); +#221411 = CARTESIAN_POINT('',(138.449476,-63.848457,1.585)); +#221412 = VECTOR('',#221413,1.); +#221413 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#221414 = ORIENTED_EDGE('',*,*,#221415,.T.); +#221415 = EDGE_CURVE('',#221408,#221416,#221418,.T.); +#221416 = VERTEX_POINT('',#221417); +#221417 = CARTESIAN_POINT('',(138.158761,-63.877156,1.585)); +#221418 = LINE('',#221419,#221420); +#221419 = CARTESIAN_POINT('',(138.383679,-63.878378,1.585)); +#221420 = VECTOR('',#221421,1.); +#221421 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#221422 = ORIENTED_EDGE('',*,*,#221423,.T.); +#221423 = EDGE_CURVE('',#221416,#221424,#221426,.T.); +#221424 = VERTEX_POINT('',#221425); +#221425 = CARTESIAN_POINT('',(138.03605,-63.814953,1.585)); +#221426 = LINE('',#221427,#221428); +#221427 = CARTESIAN_POINT('',(138.158761,-63.877156,1.585)); +#221428 = VECTOR('',#221429,1.); +#221429 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#221430 = ORIENTED_EDGE('',*,*,#221431,.T.); +#221431 = EDGE_CURVE('',#221424,#221432,#221434,.T.); +#221432 = VERTEX_POINT('',#221433); +#221433 = CARTESIAN_POINT('',(137.925734,-63.703628,1.585)); +#221434 = LINE('',#221435,#221436); +#221435 = CARTESIAN_POINT('',(138.03605,-63.814953,1.585)); +#221436 = VECTOR('',#221437,1.); +#221437 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#221438 = ORIENTED_EDGE('',*,*,#221439,.T.); +#221439 = EDGE_CURVE('',#221432,#221440,#221442,.T.); +#221440 = VERTEX_POINT('',#221441); +#221441 = CARTESIAN_POINT('',(137.915334,-63.680151,1.585)); +#221442 = LINE('',#221443,#221444); +#221443 = CARTESIAN_POINT('',(137.925734,-63.703628,1.585)); +#221444 = VECTOR('',#221445,1.); +#221445 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#221446 = ORIENTED_EDGE('',*,*,#221447,.T.); +#221447 = EDGE_CURVE('',#221440,#221448,#221450,.T.); +#221448 = VERTEX_POINT('',#221449); +#221449 = CARTESIAN_POINT('',(137.865476,-63.471485,1.585)); +#221450 = LINE('',#221451,#221452); +#221451 = CARTESIAN_POINT('',(137.915334,-63.680151,1.585)); +#221452 = VECTOR('',#221453,1.); +#221453 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#221454 = ORIENTED_EDGE('',*,*,#221455,.T.); +#221455 = EDGE_CURVE('',#221448,#221456,#221458,.T.); +#221456 = VERTEX_POINT('',#221457); +#221457 = CARTESIAN_POINT('',(137.867715,-63.119962,1.585)); +#221458 = LINE('',#221459,#221460); +#221459 = CARTESIAN_POINT('',(137.865476,-63.471485,1.585)); +#221460 = VECTOR('',#221461,1.); +#221461 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#221462 = ORIENTED_EDGE('',*,*,#221463,.T.); +#221463 = EDGE_CURVE('',#221456,#221464,#221466,.T.); +#221464 = VERTEX_POINT('',#221465); +#221465 = CARTESIAN_POINT('',(137.920281,-62.91564,1.585)); +#221466 = LINE('',#221467,#221468); +#221467 = CARTESIAN_POINT('',(137.867715,-63.119962,1.585)); +#221468 = VECTOR('',#221469,1.); +#221469 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#221470 = ORIENTED_EDGE('',*,*,#221471,.T.); +#221471 = EDGE_CURVE('',#221464,#221472,#221474,.T.); +#221472 = VERTEX_POINT('',#221473); +#221473 = CARTESIAN_POINT('',(137.935062,-62.894643,1.585)); +#221474 = LINE('',#221475,#221476); +#221475 = CARTESIAN_POINT('',(137.920281,-62.91564,1.585)); +#221476 = VECTOR('',#221477,1.); +#221477 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#221478 = ORIENTED_EDGE('',*,*,#221479,.T.); +#221479 = EDGE_CURVE('',#221472,#221300,#221480,.T.); +#221480 = LINE('',#221481,#221482); +#221481 = CARTESIAN_POINT('',(137.935062,-62.894643,1.585)); +#221482 = VECTOR('',#221483,1.); +#221483 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#221484 = FACE_BOUND('',#221485,.F.); +#221485 = EDGE_LOOP('',(#221486,#221497,#221505,#221514,#221522,#221530, + #221538,#221546,#221554,#221562,#221571,#221579,#221587,#221595, + #221603,#221612)); +#221486 = ORIENTED_EDGE('',*,*,#221487,.T.); +#221487 = EDGE_CURVE('',#221488,#221490,#221492,.T.); +#221488 = VERTEX_POINT('',#221489); +#221489 = CARTESIAN_POINT('',(138.419858,-62.914077,1.585)); +#221490 = VERTEX_POINT('',#221491); +#221491 = CARTESIAN_POINT('',(138.12776,-62.914077,1.585)); +#221492 = CIRCLE('',#221493,0.252889603602); +#221493 = AXIS2_PLACEMENT_3D('',#221494,#221495,#221496); +#221494 = CARTESIAN_POINT('',(138.273809,-63.12053,1.585)); +#221495 = DIRECTION('',(0.,0.,1.)); +#221496 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#221497 = ORIENTED_EDGE('',*,*,#221498,.T.); +#221498 = EDGE_CURVE('',#221490,#221499,#221501,.T.); +#221499 = VERTEX_POINT('',#221500); +#221500 = CARTESIAN_POINT('',(138.055817,-62.986019,1.585)); +#221501 = LINE('',#221502,#221503); +#221502 = CARTESIAN_POINT('',(138.12776,-62.914077,1.585)); +#221503 = VECTOR('',#221504,1.); +#221504 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#221505 = ORIENTED_EDGE('',*,*,#221506,.T.); +#221506 = EDGE_CURVE('',#221499,#221507,#221509,.T.); +#221507 = VERTEX_POINT('',#221508); +#221508 = CARTESIAN_POINT('',(138.055817,-63.623617,1.585)); +#221509 = CIRCLE('',#221510,0.985308713639); +#221510 = AXIS2_PLACEMENT_3D('',#221511,#221512,#221513); +#221511 = CARTESIAN_POINT('',(138.9881262077,-63.304818,1.585)); +#221512 = DIRECTION('',(0.,0.,1.)); +#221513 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#221514 = ORIENTED_EDGE('',*,*,#221515,.T.); +#221515 = EDGE_CURVE('',#221507,#221516,#221518,.T.); +#221516 = VERTEX_POINT('',#221517); +#221517 = CARTESIAN_POINT('',(138.12776,-63.695561,1.585)); +#221518 = LINE('',#221519,#221520); +#221519 = CARTESIAN_POINT('',(138.055817,-63.623617,1.585)); +#221520 = VECTOR('',#221521,1.); +#221521 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#221522 = ORIENTED_EDGE('',*,*,#221523,.T.); +#221523 = EDGE_CURVE('',#221516,#221524,#221526,.T.); +#221524 = VERTEX_POINT('',#221525); +#221525 = CARTESIAN_POINT('',(138.196276,-63.729819,1.585)); +#221526 = LINE('',#221527,#221528); +#221527 = CARTESIAN_POINT('',(138.12776,-63.695561,1.585)); +#221528 = VECTOR('',#221529,1.); +#221529 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#221530 = ORIENTED_EDGE('',*,*,#221531,.T.); +#221531 = EDGE_CURVE('',#221524,#221532,#221534,.T.); +#221532 = VERTEX_POINT('',#221533); +#221533 = CARTESIAN_POINT('',(138.330839,-63.729819,1.585)); +#221534 = LINE('',#221535,#221536); +#221535 = CARTESIAN_POINT('',(138.196276,-63.729819,1.585)); +#221536 = VECTOR('',#221537,1.); +#221537 = DIRECTION('',(1.,0.,0.)); +#221538 = ORIENTED_EDGE('',*,*,#221539,.T.); +#221539 = EDGE_CURVE('',#221532,#221540,#221542,.T.); +#221540 = VERTEX_POINT('',#221541); +#221541 = CARTESIAN_POINT('',(138.277,-63.67598,1.585)); +#221542 = LINE('',#221543,#221544); +#221543 = CARTESIAN_POINT('',(138.330839,-63.729819,1.585)); +#221544 = VECTOR('',#221545,1.); +#221545 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#221546 = ORIENTED_EDGE('',*,*,#221547,.T.); +#221547 = EDGE_CURVE('',#221540,#221548,#221550,.T.); +#221548 = VERTEX_POINT('',#221549); +#221549 = CARTESIAN_POINT('',(138.208485,-63.641723,1.585)); +#221550 = LINE('',#221551,#221552); +#221551 = CARTESIAN_POINT('',(138.277,-63.67598,1.585)); +#221552 = VECTOR('',#221553,1.); +#221553 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#221554 = ORIENTED_EDGE('',*,*,#221555,.T.); +#221555 = EDGE_CURVE('',#221548,#221556,#221558,.T.); +#221556 = VERTEX_POINT('',#221557); +#221557 = CARTESIAN_POINT('',(138.11632,-63.640282,1.585)); +#221558 = LINE('',#221559,#221560); +#221559 = CARTESIAN_POINT('',(138.208485,-63.641723,1.585)); +#221560 = VECTOR('',#221561,1.); +#221561 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#221562 = ORIENTED_EDGE('',*,*,#221563,.T.); +#221563 = EDGE_CURVE('',#221556,#221564,#221566,.T.); +#221564 = VERTEX_POINT('',#221565); +#221565 = CARTESIAN_POINT('',(138.130952,-63.491723,1.585)); +#221566 = CIRCLE('',#221567,7.500006711464E-02); +#221567 = AXIS2_PLACEMENT_3D('',#221568,#221569,#221570); +#221568 = CARTESIAN_POINT('',(138.13095193288,-63.56672306711,1.585)); +#221569 = DIRECTION('',(0.,0.,-1.)); +#221570 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#221571 = ORIENTED_EDGE('',*,*,#221572,.T.); +#221572 = EDGE_CURVE('',#221564,#221573,#221575,.T.); +#221573 = VERTEX_POINT('',#221574); +#221574 = CARTESIAN_POINT('',(138.245999,-63.494386,1.585)); +#221575 = LINE('',#221576,#221577); +#221576 = CARTESIAN_POINT('',(138.130952,-63.491723,1.585)); +#221577 = VECTOR('',#221578,1.); +#221578 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#221579 = ORIENTED_EDGE('',*,*,#221580,.T.); +#221580 = EDGE_CURVE('',#221573,#221581,#221583,.T.); +#221581 = VERTEX_POINT('',#221582); +#221582 = CARTESIAN_POINT('',(138.368711,-63.55659,1.585)); +#221583 = LINE('',#221584,#221585); +#221584 = CARTESIAN_POINT('',(138.245999,-63.494386,1.585)); +#221585 = VECTOR('',#221586,1.); +#221586 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#221587 = ORIENTED_EDGE('',*,*,#221588,.T.); +#221588 = EDGE_CURVE('',#221581,#221589,#221591,.T.); +#221589 = VERTEX_POINT('',#221590); +#221590 = CARTESIAN_POINT('',(138.464284,-63.651133,1.585)); +#221591 = LINE('',#221592,#221593); +#221592 = CARTESIAN_POINT('',(138.368711,-63.55659,1.585)); +#221593 = VECTOR('',#221594,1.); +#221594 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#221595 = ORIENTED_EDGE('',*,*,#221596,.T.); +#221596 = EDGE_CURVE('',#221589,#221597,#221599,.T.); +#221597 = VERTEX_POINT('',#221598); +#221598 = CARTESIAN_POINT('',(138.4918,-63.623617,1.585)); +#221599 = LINE('',#221600,#221601); +#221600 = CARTESIAN_POINT('',(138.464284,-63.651133,1.585)); +#221601 = VECTOR('',#221602,1.); +#221602 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#221603 = ORIENTED_EDGE('',*,*,#221604,.T.); +#221604 = EDGE_CURVE('',#221597,#221605,#221607,.T.); +#221605 = VERTEX_POINT('',#221606); +#221606 = CARTESIAN_POINT('',(138.4918,-62.986019,1.585)); +#221607 = CIRCLE('',#221608,0.985282207897); +#221608 = AXIS2_PLACEMENT_3D('',#221609,#221610,#221611); +#221609 = CARTESIAN_POINT('',(137.55951880486,-63.304818,1.585)); +#221610 = DIRECTION('',(0.,-0.,1.)); +#221611 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#221612 = ORIENTED_EDGE('',*,*,#221613,.T.); +#221613 = EDGE_CURVE('',#221605,#221488,#221614,.T.); +#221614 = LINE('',#221615,#221616); +#221615 = CARTESIAN_POINT('',(138.4918,-62.986019,1.585)); +#221616 = VECTOR('',#221617,1.); +#221617 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221618 = PLANE('',#221619); +#221619 = AXIS2_PLACEMENT_3D('',#221620,#221621,#221622); +#221620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221621 = DIRECTION('',(0.,0.,1.)); +#221622 = DIRECTION('',(1.,0.,-0.)); +#221623 = SHELL_BASED_SURFACE_MODEL('',(#221624)); +#221624 = OPEN_SHELL('',(#221625)); +#221625 = ADVANCED_FACE('',(#221626),#221760,.T.); +#221626 = FACE_BOUND('',#221627,.F.); +#221627 = EDGE_LOOP('',(#221628,#221638,#221646,#221655,#221663,#221671, + #221680,#221688,#221697,#221705,#221713,#221721,#221729,#221738, + #221746,#221754)); +#221628 = ORIENTED_EDGE('',*,*,#221629,.T.); +#221629 = EDGE_CURVE('',#221630,#221632,#221634,.T.); +#221630 = VERTEX_POINT('',#221631); +#221631 = CARTESIAN_POINT('',(179.114752,-62.794941,1.585)); +#221632 = VERTEX_POINT('',#221633); +#221633 = CARTESIAN_POINT('',(179.153208,-62.77436,1.585)); +#221634 = LINE('',#221635,#221636); +#221635 = CARTESIAN_POINT('',(179.114752,-62.794941,1.585)); +#221636 = VECTOR('',#221637,1.); +#221637 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#221638 = ORIENTED_EDGE('',*,*,#221639,.T.); +#221639 = EDGE_CURVE('',#221632,#221640,#221642,.T.); +#221640 = VERTEX_POINT('',#221641); +#221641 = CARTESIAN_POINT('',(179.175045,-62.77436,1.585)); +#221642 = LINE('',#221643,#221644); +#221643 = CARTESIAN_POINT('',(179.153208,-62.77436,1.585)); +#221644 = VECTOR('',#221645,1.); +#221645 = DIRECTION('',(1.,0.,0.)); +#221646 = ORIENTED_EDGE('',*,*,#221647,.T.); +#221647 = EDGE_CURVE('',#221640,#221648,#221650,.T.); +#221648 = VERTEX_POINT('',#221649); +#221649 = CARTESIAN_POINT('',(179.24284,-62.847919,1.585)); +#221650 = CIRCLE('',#221651,7.21689809423E-02); +#221651 = AXIS2_PLACEMENT_3D('',#221652,#221653,#221654); +#221652 = CARTESIAN_POINT('',(179.17068706389,-62.84639728342,1.585)); +#221653 = DIRECTION('',(0.,0.,-1.)); +#221654 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#221655 = ORIENTED_EDGE('',*,*,#221656,.T.); +#221656 = EDGE_CURVE('',#221648,#221657,#221659,.T.); +#221657 = VERTEX_POINT('',#221658); +#221658 = CARTESIAN_POINT('',(179.24284,-63.772919,1.585)); +#221659 = LINE('',#221660,#221661); +#221660 = CARTESIAN_POINT('',(179.24284,-62.847919,1.585)); +#221661 = VECTOR('',#221662,1.); +#221662 = DIRECTION('',(0.,-1.,0.)); +#221663 = ORIENTED_EDGE('',*,*,#221664,.T.); +#221664 = EDGE_CURVE('',#221657,#221665,#221667,.T.); +#221665 = VERTEX_POINT('',#221666); +#221666 = CARTESIAN_POINT('',(179.468186,-63.77436,1.585)); +#221667 = LINE('',#221668,#221669); +#221668 = CARTESIAN_POINT('',(179.24284,-63.772919,1.585)); +#221669 = VECTOR('',#221670,1.); +#221670 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#221671 = ORIENTED_EDGE('',*,*,#221672,.T.); +#221672 = EDGE_CURVE('',#221665,#221673,#221675,.T.); +#221673 = VERTEX_POINT('',#221674); +#221674 = CARTESIAN_POINT('',(179.453554,-63.922919,1.585)); +#221675 = CIRCLE('',#221676,7.500006711463E-02); +#221676 = AXIS2_PLACEMENT_3D('',#221677,#221678,#221679); +#221677 = CARTESIAN_POINT('',(179.45355406711,-63.84791893288,1.585)); +#221678 = DIRECTION('',(0.,0.,-1.)); +#221679 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#221680 = ORIENTED_EDGE('',*,*,#221681,.T.); +#221681 = EDGE_CURVE('',#221673,#221682,#221684,.T.); +#221682 = VERTEX_POINT('',#221683); +#221683 = CARTESIAN_POINT('',(178.867494,-63.921478,1.585)); +#221684 = LINE('',#221685,#221686); +#221685 = CARTESIAN_POINT('',(179.453554,-63.922919,1.585)); +#221686 = VECTOR('',#221687,1.); +#221687 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#221688 = ORIENTED_EDGE('',*,*,#221689,.T.); +#221689 = EDGE_CURVE('',#221682,#221690,#221692,.T.); +#221690 = VERTEX_POINT('',#221691); +#221691 = CARTESIAN_POINT('',(178.882126,-63.772919,1.585)); +#221692 = CIRCLE('',#221693,7.500006711464E-02); +#221693 = AXIS2_PLACEMENT_3D('',#221694,#221695,#221696); +#221694 = CARTESIAN_POINT('',(178.88212593288,-63.84791906711,1.585)); +#221695 = DIRECTION('',(0.,0.,-1.)); +#221696 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#221697 = ORIENTED_EDGE('',*,*,#221698,.T.); +#221698 = EDGE_CURVE('',#221690,#221699,#221701,.T.); +#221699 = VERTEX_POINT('',#221700); +#221700 = CARTESIAN_POINT('',(179.09284,-63.772919,1.585)); +#221701 = LINE('',#221702,#221703); +#221702 = CARTESIAN_POINT('',(178.882126,-63.772919,1.585)); +#221703 = VECTOR('',#221704,1.); +#221704 = DIRECTION('',(1.,0.,0.)); +#221705 = ORIENTED_EDGE('',*,*,#221706,.T.); +#221706 = EDGE_CURVE('',#221699,#221707,#221709,.T.); +#221707 = VERTEX_POINT('',#221708); +#221708 = CARTESIAN_POINT('',(179.09284,-63.076604,1.585)); +#221709 = LINE('',#221710,#221711); +#221710 = CARTESIAN_POINT('',(179.09284,-63.772919,1.585)); +#221711 = VECTOR('',#221712,1.); +#221712 = DIRECTION('',(0.,1.,0.)); +#221713 = ORIENTED_EDGE('',*,*,#221714,.T.); +#221714 = EDGE_CURVE('',#221707,#221715,#221717,.T.); +#221715 = VERTEX_POINT('',#221716); +#221716 = CARTESIAN_POINT('',(179.017204,-63.149131,1.585)); +#221717 = LINE('',#221718,#221719); +#221718 = CARTESIAN_POINT('',(179.09284,-63.076604,1.585)); +#221719 = VECTOR('',#221720,1.); +#221720 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#221721 = ORIENTED_EDGE('',*,*,#221722,.T.); +#221722 = EDGE_CURVE('',#221715,#221723,#221725,.T.); +#221723 = VERTEX_POINT('',#221724); +#221724 = CARTESIAN_POINT('',(178.901935,-63.20597,1.585)); +#221725 = LINE('',#221726,#221727); +#221726 = CARTESIAN_POINT('',(179.017204,-63.149131,1.585)); +#221727 = VECTOR('',#221728,1.); +#221728 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#221729 = ORIENTED_EDGE('',*,*,#221730,.T.); +#221730 = EDGE_CURVE('',#221723,#221731,#221733,.T.); +#221731 = VERTEX_POINT('',#221732); +#221732 = CARTESIAN_POINT('',(178.848585,-63.066551,1.585)); +#221733 = CIRCLE('',#221734,7.500005272362E-02); +#221734 = AXIS2_PLACEMENT_3D('',#221735,#221736,#221737); +#221735 = CARTESIAN_POINT('',(178.88212555676,-63.13363332972,1.585)); +#221736 = DIRECTION('',(0.,0.,-1.)); +#221737 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#221738 = ORIENTED_EDGE('',*,*,#221739,.T.); +#221739 = EDGE_CURVE('',#221731,#221740,#221742,.T.); +#221740 = VERTEX_POINT('',#221741); +#221741 = CARTESIAN_POINT('',(178.932937,-63.024375,1.585)); +#221742 = LINE('',#221743,#221744); +#221743 = CARTESIAN_POINT('',(178.848585,-63.066551,1.585)); +#221744 = VECTOR('',#221745,1.); +#221745 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#221746 = ORIENTED_EDGE('',*,*,#221747,.T.); +#221747 = EDGE_CURVE('',#221740,#221748,#221750,.T.); +#221748 = VERTEX_POINT('',#221749); +#221749 = CARTESIAN_POINT('',(179.014316,-62.942996,1.585)); +#221750 = LINE('',#221751,#221752); +#221751 = CARTESIAN_POINT('',(178.932937,-63.024375,1.585)); +#221752 = VECTOR('',#221753,1.); +#221753 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#221754 = ORIENTED_EDGE('',*,*,#221755,.T.); +#221755 = EDGE_CURVE('',#221748,#221630,#221756,.T.); +#221756 = LINE('',#221757,#221758); +#221757 = CARTESIAN_POINT('',(179.014316,-62.942996,1.585)); +#221758 = VECTOR('',#221759,1.); +#221759 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#221760 = PLANE('',#221761); +#221761 = AXIS2_PLACEMENT_3D('',#221762,#221763,#221764); +#221762 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221763 = DIRECTION('',(0.,0.,1.)); +#221764 = DIRECTION('',(1.,0.,-0.)); +#221765 = SHELL_BASED_SURFACE_MODEL('',(#221766)); +#221766 = OPEN_SHELL('',(#221767)); +#221767 = ADVANCED_FACE('',(#221768,#221879),#221931,.T.); +#221768 = FACE_BOUND('',#221769,.F.); +#221769 = EDGE_LOOP('',(#221770,#221781,#221789,#221798,#221806,#221815, + #221823,#221831,#221840,#221848,#221856,#221864,#221873)); +#221770 = ORIENTED_EDGE('',*,*,#221771,.T.); +#221771 = EDGE_CURVE('',#221772,#221774,#221776,.T.); +#221772 = VERTEX_POINT('',#221773); +#221773 = CARTESIAN_POINT('',(176.903805,-62.833287,1.585)); +#221774 = VERTEX_POINT('',#221775); +#221775 = CARTESIAN_POINT('',(176.977364,-62.772919,1.585)); +#221776 = CIRCLE('',#221777,7.500074938991E-02); +#221777 = AXIS2_PLACEMENT_3D('',#221778,#221779,#221780); +#221778 = CARTESIAN_POINT('',(176.97736446611,-62.84791974938,1.585)); +#221779 = DIRECTION('',(0.,0.,-1.)); +#221780 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#221781 = ORIENTED_EDGE('',*,*,#221782,.T.); +#221782 = EDGE_CURVE('',#221774,#221783,#221785,.T.); +#221783 = VERTEX_POINT('',#221784); +#221784 = CARTESIAN_POINT('',(177.372948,-62.77436,1.585)); +#221785 = LINE('',#221786,#221787); +#221786 = CARTESIAN_POINT('',(176.977364,-62.772919,1.585)); +#221787 = VECTOR('',#221788,1.); +#221788 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#221789 = ORIENTED_EDGE('',*,*,#221790,.T.); +#221790 = EDGE_CURVE('',#221783,#221791,#221793,.T.); +#221791 = VERTEX_POINT('',#221792); +#221792 = CARTESIAN_POINT('',(177.622351,-63.023763,1.585)); +#221793 = CIRCLE('',#221794,0.347870264855); +#221794 = AXIS2_PLACEMENT_3D('',#221795,#221796,#221797); +#221795 = CARTESIAN_POINT('',(177.28562026502,-63.11109073497,1.585)); +#221796 = DIRECTION('',(0.,0.,-1.)); +#221797 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#221798 = ORIENTED_EDGE('',*,*,#221799,.T.); +#221799 = EDGE_CURVE('',#221791,#221800,#221802,.T.); +#221800 = VERTEX_POINT('',#221801); +#221801 = CARTESIAN_POINT('',(177.621129,-63.201062,1.585)); +#221802 = LINE('',#221803,#221804); +#221803 = CARTESIAN_POINT('',(177.622351,-63.023763,1.585)); +#221804 = VECTOR('',#221805,1.); +#221805 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#221806 = ORIENTED_EDGE('',*,*,#221807,.T.); +#221807 = EDGE_CURVE('',#221800,#221808,#221810,.T.); +#221808 = VERTEX_POINT('',#221809); +#221809 = CARTESIAN_POINT('',(177.372948,-63.445287,1.585)); +#221810 = CIRCLE('',#221811,0.348632345849); +#221811 = AXIS2_PLACEMENT_3D('',#221812,#221813,#221814); +#221812 = CARTESIAN_POINT('',(177.28517919403,-63.1078834593,1.585)); +#221813 = DIRECTION('',(0.,0.,-1.)); +#221814 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#221815 = ORIENTED_EDGE('',*,*,#221816,.T.); +#221816 = EDGE_CURVE('',#221808,#221817,#221819,.T.); +#221817 = VERTEX_POINT('',#221818); +#221818 = CARTESIAN_POINT('',(177.359431,-63.446618,1.585)); +#221819 = LINE('',#221820,#221821); +#221820 = CARTESIAN_POINT('',(177.372948,-63.445287,1.585)); +#221821 = VECTOR('',#221822,1.); +#221822 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#221823 = ORIENTED_EDGE('',*,*,#221824,.T.); +#221824 = EDGE_CURVE('',#221817,#221825,#221827,.T.); +#221825 = VERTEX_POINT('',#221826); +#221826 = CARTESIAN_POINT('',(177.617445,-63.817723,1.585)); +#221827 = LINE('',#221828,#221829); +#221828 = CARTESIAN_POINT('',(177.359431,-63.446618,1.585)); +#221829 = VECTOR('',#221830,1.); +#221830 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#221831 = ORIENTED_EDGE('',*,*,#221832,.T.); +#221832 = EDGE_CURVE('',#221825,#221833,#221835,.T.); +#221833 = VERTEX_POINT('',#221834); +#221834 = CARTESIAN_POINT('',(177.48735,-63.890929,1.585)); +#221835 = CIRCLE('',#221836,7.500005951703E-02); +#221836 = AXIS2_PLACEMENT_3D('',#221837,#221838,#221839); +#221837 = CARTESIAN_POINT('',(177.54879206294,-63.84791874739,1.585)); +#221838 = DIRECTION('',(0.,0.,-1.)); +#221839 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#221840 = ORIENTED_EDGE('',*,*,#221841,.T.); +#221841 = EDGE_CURVE('',#221833,#221842,#221844,.T.); +#221842 = VERTEX_POINT('',#221843); +#221843 = CARTESIAN_POINT('',(177.17641,-63.446728,1.585)); +#221844 = LINE('',#221845,#221846); +#221845 = CARTESIAN_POINT('',(177.48735,-63.890929,1.585)); +#221846 = VECTOR('',#221847,1.); +#221847 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#221848 = ORIENTED_EDGE('',*,*,#221849,.T.); +#221849 = EDGE_CURVE('',#221842,#221850,#221852,.T.); +#221850 = VERTEX_POINT('',#221851); +#221851 = CARTESIAN_POINT('',(177.052364,-63.446728,1.585)); +#221852 = LINE('',#221853,#221854); +#221853 = CARTESIAN_POINT('',(177.17641,-63.446728,1.585)); +#221854 = VECTOR('',#221855,1.); +#221855 = DIRECTION('',(-1.,0.,0.)); +#221856 = ORIENTED_EDGE('',*,*,#221857,.T.); +#221857 = EDGE_CURVE('',#221850,#221858,#221860,.T.); +#221858 = VERTEX_POINT('',#221859); +#221859 = CARTESIAN_POINT('',(177.050923,-63.862551,1.585)); +#221860 = LINE('',#221861,#221862); +#221861 = CARTESIAN_POINT('',(177.052364,-63.446728,1.585)); +#221862 = VECTOR('',#221863,1.); +#221863 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#221864 = ORIENTED_EDGE('',*,*,#221865,.T.); +#221865 = EDGE_CURVE('',#221858,#221866,#221868,.T.); +#221866 = VERTEX_POINT('',#221867); +#221867 = CARTESIAN_POINT('',(176.902364,-63.847919,1.585)); +#221868 = CIRCLE('',#221869,7.500006711464E-02); +#221869 = AXIS2_PLACEMENT_3D('',#221870,#221871,#221872); +#221870 = CARTESIAN_POINT('',(176.97736406711,-63.84791906711,1.585)); +#221871 = DIRECTION('',(-0.,0.,-1.)); +#221872 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#221873 = ORIENTED_EDGE('',*,*,#221874,.T.); +#221874 = EDGE_CURVE('',#221866,#221772,#221875,.T.); +#221875 = LINE('',#221876,#221877); +#221876 = CARTESIAN_POINT('',(176.902364,-63.847919,1.585)); +#221877 = VECTOR('',#221878,1.); +#221878 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#221879 = FACE_BOUND('',#221880,.F.); +#221880 = EDGE_LOOP('',(#221881,#221892,#221900,#221908,#221916,#221925) + ); +#221881 = ORIENTED_EDGE('',*,*,#221882,.T.); +#221882 = EDGE_CURVE('',#221883,#221885,#221887,.T.); +#221883 = VERTEX_POINT('',#221884); +#221884 = CARTESIAN_POINT('',(177.473792,-63.0561,1.585)); +#221885 = VERTEX_POINT('',#221886); +#221886 = CARTESIAN_POINT('',(177.340611,-62.922919,1.585)); +#221887 = CIRCLE('',#221888,0.18686440374); +#221888 = AXIS2_PLACEMENT_3D('',#221889,#221890,#221891); +#221889 = CARTESIAN_POINT('',(177.293075,-63.103636,1.585)); +#221890 = DIRECTION('',(0.,0.,1.)); +#221891 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#221892 = ORIENTED_EDGE('',*,*,#221893,.T.); +#221893 = EDGE_CURVE('',#221885,#221894,#221896,.T.); +#221894 = VERTEX_POINT('',#221895); +#221895 = CARTESIAN_POINT('',(177.052364,-62.922919,1.585)); +#221896 = LINE('',#221897,#221898); +#221897 = CARTESIAN_POINT('',(177.340611,-62.922919,1.585)); +#221898 = VECTOR('',#221899,1.); +#221899 = DIRECTION('',(-1.,0.,0.)); +#221900 = ORIENTED_EDGE('',*,*,#221901,.T.); +#221901 = EDGE_CURVE('',#221894,#221902,#221904,.T.); +#221902 = VERTEX_POINT('',#221903); +#221903 = CARTESIAN_POINT('',(177.052364,-63.296728,1.585)); +#221904 = LINE('',#221905,#221906); +#221905 = CARTESIAN_POINT('',(177.052364,-62.922919,1.585)); +#221906 = VECTOR('',#221907,1.); +#221907 = DIRECTION('',(0.,-1.,0.)); +#221908 = ORIENTED_EDGE('',*,*,#221909,.T.); +#221909 = EDGE_CURVE('',#221902,#221910,#221912,.T.); +#221910 = VERTEX_POINT('',#221911); +#221911 = CARTESIAN_POINT('',(177.340611,-63.296728,1.585)); +#221912 = LINE('',#221913,#221914); +#221913 = CARTESIAN_POINT('',(177.052364,-63.296728,1.585)); +#221914 = VECTOR('',#221915,1.); +#221915 = DIRECTION('',(1.,0.,0.)); +#221916 = ORIENTED_EDGE('',*,*,#221917,.T.); +#221917 = EDGE_CURVE('',#221910,#221918,#221920,.T.); +#221918 = VERTEX_POINT('',#221919); +#221919 = CARTESIAN_POINT('',(177.473792,-63.163547,1.585)); +#221920 = CIRCLE('',#221921,0.18686440374); +#221921 = AXIS2_PLACEMENT_3D('',#221922,#221923,#221924); +#221922 = CARTESIAN_POINT('',(177.293075,-63.116011,1.585)); +#221923 = DIRECTION('',(0.,0.,1.)); +#221924 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#221925 = ORIENTED_EDGE('',*,*,#221926,.T.); +#221926 = EDGE_CURVE('',#221918,#221883,#221927,.T.); +#221927 = LINE('',#221928,#221929); +#221928 = CARTESIAN_POINT('',(177.473792,-63.163547,1.585)); +#221929 = VECTOR('',#221930,1.); +#221930 = DIRECTION('',(0.,1.,0.)); +#221931 = PLANE('',#221932); +#221932 = AXIS2_PLACEMENT_3D('',#221933,#221934,#221935); +#221933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#221934 = DIRECTION('',(0.,0.,1.)); +#221935 = DIRECTION('',(1.,0.,-0.)); +#221936 = SHELL_BASED_SURFACE_MODEL('',(#221937)); +#221937 = OPEN_SHELL('',(#221938)); +#221938 = ADVANCED_FACE('',(#221939),#222074,.T.); +#221939 = FACE_BOUND('',#221940,.F.); +#221940 = EDGE_LOOP('',(#221941,#221952,#221960,#221968,#221976,#221985, + #221993,#222001,#222010,#222018,#222026,#222035,#222043,#222051, + #222060,#222068)); +#221941 = ORIENTED_EDGE('',*,*,#221942,.T.); +#221942 = EDGE_CURVE('',#221943,#221945,#221947,.T.); +#221943 = VERTEX_POINT('',#221944); +#221944 = CARTESIAN_POINT('',(178.121857,-62.741051,1.585)); +#221945 = VERTEX_POINT('',#221946); +#221946 = CARTESIAN_POINT('',(178.238991,-62.824018,1.585)); +#221947 = CIRCLE('',#221948,7.499955990672E-02); +#221948 = AXIS2_PLACEMENT_3D('',#221949,#221950,#221951); +#221949 = CARTESIAN_POINT('',(178.16784050095,-62.80030006435,1.585)); +#221950 = DIRECTION('',(0.,0.,-1.)); +#221951 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#221952 = ORIENTED_EDGE('',*,*,#221953,.T.); +#221953 = EDGE_CURVE('',#221945,#221954,#221956,.T.); +#221954 = VERTEX_POINT('',#221955); +#221955 = CARTESIAN_POINT('',(178.033802,-63.439585,1.585)); +#221956 = LINE('',#221957,#221958); +#221957 = CARTESIAN_POINT('',(178.238991,-62.824018,1.585)); +#221958 = VECTOR('',#221959,1.); +#221959 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#221960 = ORIENTED_EDGE('',*,*,#221961,.T.); +#221961 = EDGE_CURVE('',#221954,#221962,#221964,.T.); +#221962 = VERTEX_POINT('',#221963); +#221963 = CARTESIAN_POINT('',(178.330935,-63.439585,1.585)); +#221964 = LINE('',#221965,#221966); +#221965 = CARTESIAN_POINT('',(178.033802,-63.439585,1.585)); +#221966 = VECTOR('',#221967,1.); +#221967 = DIRECTION('',(1.,0.,0.)); +#221968 = ORIENTED_EDGE('',*,*,#221969,.T.); +#221969 = EDGE_CURVE('',#221962,#221970,#221972,.T.); +#221970 = VERTEX_POINT('',#221971); +#221971 = CARTESIAN_POINT('',(178.332376,-63.16662,1.585)); +#221972 = LINE('',#221973,#221974); +#221973 = CARTESIAN_POINT('',(178.330935,-63.439585,1.585)); +#221974 = VECTOR('',#221975,1.); +#221975 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#221976 = ORIENTED_EDGE('',*,*,#221977,.T.); +#221977 = EDGE_CURVE('',#221970,#221978,#221980,.T.); +#221978 = VERTEX_POINT('',#221979); +#221979 = CARTESIAN_POINT('',(178.480935,-63.181252,1.585)); +#221980 = CIRCLE('',#221981,7.500006711463E-02); +#221981 = AXIS2_PLACEMENT_3D('',#221982,#221983,#221984); +#221982 = CARTESIAN_POINT('',(178.40593493288,-63.18125193288,1.585)); +#221983 = DIRECTION('',(0.,0.,-1.)); +#221984 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#221985 = ORIENTED_EDGE('',*,*,#221986,.T.); +#221986 = EDGE_CURVE('',#221978,#221987,#221989,.T.); +#221987 = VERTEX_POINT('',#221988); +#221988 = CARTESIAN_POINT('',(178.480935,-63.439585,1.585)); +#221989 = LINE('',#221990,#221991); +#221990 = CARTESIAN_POINT('',(178.480935,-63.181252,1.585)); +#221991 = VECTOR('',#221992,1.); +#221992 = DIRECTION('',(0.,-1.,0.)); +#221993 = ORIENTED_EDGE('',*,*,#221994,.T.); +#221994 = EDGE_CURVE('',#221987,#221995,#221997,.T.); +#221995 = VERTEX_POINT('',#221996); +#221996 = CARTESIAN_POINT('',(178.563424,-63.441026,1.585)); +#221997 = LINE('',#221998,#221999); +#221998 = CARTESIAN_POINT('',(178.480935,-63.439585,1.585)); +#221999 = VECTOR('',#222000,1.); +#222000 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#222001 = ORIENTED_EDGE('',*,*,#222002,.T.); +#222002 = EDGE_CURVE('',#221995,#222003,#222005,.T.); +#222003 = VERTEX_POINT('',#222004); +#222004 = CARTESIAN_POINT('',(178.548792,-63.589585,1.585)); +#222005 = CIRCLE('',#222006,7.500006711464E-02); +#222006 = AXIS2_PLACEMENT_3D('',#222007,#222008,#222009); +#222007 = CARTESIAN_POINT('',(178.54879206711,-63.51458493288,1.585)); +#222008 = DIRECTION('',(0.,0.,-1.)); +#222009 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#222010 = ORIENTED_EDGE('',*,*,#222011,.T.); +#222011 = EDGE_CURVE('',#222003,#222012,#222014,.T.); +#222012 = VERTEX_POINT('',#222013); +#222013 = CARTESIAN_POINT('',(178.480935,-63.589585,1.585)); +#222014 = LINE('',#222015,#222016); +#222015 = CARTESIAN_POINT('',(178.548792,-63.589585,1.585)); +#222016 = VECTOR('',#222017,1.); +#222017 = DIRECTION('',(-1.,0.,0.)); +#222018 = ORIENTED_EDGE('',*,*,#222019,.T.); +#222019 = EDGE_CURVE('',#222012,#222020,#222022,.T.); +#222020 = VERTEX_POINT('',#222021); +#222021 = CARTESIAN_POINT('',(178.479494,-63.862551,1.585)); +#222022 = LINE('',#222023,#222024); +#222023 = CARTESIAN_POINT('',(178.480935,-63.589585,1.585)); +#222024 = VECTOR('',#222025,1.); +#222025 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#222026 = ORIENTED_EDGE('',*,*,#222027,.T.); +#222027 = EDGE_CURVE('',#222020,#222028,#222030,.T.); +#222028 = VERTEX_POINT('',#222029); +#222029 = CARTESIAN_POINT('',(178.330935,-63.847919,1.585)); +#222030 = CIRCLE('',#222031,7.500006711463E-02); +#222031 = AXIS2_PLACEMENT_3D('',#222032,#222033,#222034); +#222032 = CARTESIAN_POINT('',(178.40593506711,-63.84791906711,1.585)); +#222033 = DIRECTION('',(-0.,0.,-1.)); +#222034 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#222035 = ORIENTED_EDGE('',*,*,#222036,.T.); +#222036 = EDGE_CURVE('',#222028,#222037,#222039,.T.); +#222037 = VERTEX_POINT('',#222038); +#222038 = CARTESIAN_POINT('',(178.330935,-63.589585,1.585)); +#222039 = LINE('',#222040,#222041); +#222040 = CARTESIAN_POINT('',(178.330935,-63.847919,1.585)); +#222041 = VECTOR('',#222042,1.); +#222042 = DIRECTION('',(0.,1.,0.)); +#222043 = ORIENTED_EDGE('',*,*,#222044,.T.); +#222044 = EDGE_CURVE('',#222037,#222045,#222047,.T.); +#222045 = VERTEX_POINT('',#222046); +#222046 = CARTESIAN_POINT('',(177.915113,-63.588144,1.585)); +#222047 = LINE('',#222048,#222049); +#222048 = CARTESIAN_POINT('',(178.330935,-63.589585,1.585)); +#222049 = VECTOR('',#222050,1.); +#222050 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#222051 = ORIENTED_EDGE('',*,*,#222052,.T.); +#222052 = EDGE_CURVE('',#222045,#222053,#222055,.T.); +#222053 = VERTEX_POINT('',#222054); +#222054 = CARTESIAN_POINT('',(177.858594,-63.490868,1.585)); +#222055 = CIRCLE('',#222056,7.499997045039E-02); +#222056 = AXIS2_PLACEMENT_3D('',#222057,#222058,#222059); +#222057 = CARTESIAN_POINT('',(177.92974517257,-63.51458521335,1.585)); +#222058 = DIRECTION('',(0.,0.,-1.)); +#222059 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#222060 = ORIENTED_EDGE('',*,*,#222061,.T.); +#222061 = EDGE_CURVE('',#222053,#222062,#222064,.T.); +#222062 = VERTEX_POINT('',#222063); +#222063 = CARTESIAN_POINT('',(178.102683,-62.763158,1.585)); +#222064 = LINE('',#222065,#222066); +#222065 = CARTESIAN_POINT('',(177.858594,-63.490868,1.585)); +#222066 = VECTOR('',#222067,1.); +#222067 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#222068 = ORIENTED_EDGE('',*,*,#222069,.T.); +#222069 = EDGE_CURVE('',#222062,#221943,#222070,.T.); +#222070 = LINE('',#222071,#222072); +#222071 = CARTESIAN_POINT('',(178.102683,-62.763158,1.585)); +#222072 = VECTOR('',#222073,1.); +#222073 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#222074 = PLANE('',#222075); +#222075 = AXIS2_PLACEMENT_3D('',#222076,#222077,#222078); +#222076 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222077 = DIRECTION('',(0.,0.,1.)); +#222078 = DIRECTION('',(1.,0.,-0.)); +#222079 = SHELL_BASED_SURFACE_MODEL('',(#222080)); +#222080 = OPEN_SHELL('',(#222081)); +#222081 = ADVANCED_FACE('',(#222082),#222216,.T.); +#222082 = FACE_BOUND('',#222083,.F.); +#222083 = EDGE_LOOP('',(#222084,#222094,#222102,#222111,#222119,#222127, + #222136,#222144,#222153,#222161,#222169,#222177,#222185,#222194, + #222202,#222210)); +#222084 = ORIENTED_EDGE('',*,*,#222085,.T.); +#222085 = EDGE_CURVE('',#222086,#222088,#222090,.T.); +#222086 = VERTEX_POINT('',#222087); +#222087 = CARTESIAN_POINT('',(139.220721,-62.751841,1.585)); +#222088 = VERTEX_POINT('',#222089); +#222089 = CARTESIAN_POINT('',(139.259177,-62.73126,1.585)); +#222090 = LINE('',#222091,#222092); +#222091 = CARTESIAN_POINT('',(139.220721,-62.751841,1.585)); +#222092 = VECTOR('',#222093,1.); +#222093 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#222094 = ORIENTED_EDGE('',*,*,#222095,.T.); +#222095 = EDGE_CURVE('',#222088,#222096,#222098,.T.); +#222096 = VERTEX_POINT('',#222097); +#222097 = CARTESIAN_POINT('',(139.281014,-62.73126,1.585)); +#222098 = LINE('',#222099,#222100); +#222099 = CARTESIAN_POINT('',(139.259177,-62.73126,1.585)); +#222100 = VECTOR('',#222101,1.); +#222101 = DIRECTION('',(1.,0.,0.)); +#222102 = ORIENTED_EDGE('',*,*,#222103,.T.); +#222103 = EDGE_CURVE('',#222096,#222104,#222106,.T.); +#222104 = VERTEX_POINT('',#222105); +#222105 = CARTESIAN_POINT('',(139.348809,-62.804819,1.585)); +#222106 = CIRCLE('',#222107,7.216898094225E-02); +#222107 = AXIS2_PLACEMENT_3D('',#222108,#222109,#222110); +#222108 = CARTESIAN_POINT('',(139.27665606389,-62.80329728342,1.585)); +#222109 = DIRECTION('',(0.,0.,-1.)); +#222110 = DIRECTION('',(6.038516895227E-02,0.998175150648,0.)); +#222111 = ORIENTED_EDGE('',*,*,#222112,.T.); +#222112 = EDGE_CURVE('',#222104,#222113,#222115,.T.); +#222113 = VERTEX_POINT('',#222114); +#222114 = CARTESIAN_POINT('',(139.348809,-63.729819,1.585)); +#222115 = LINE('',#222116,#222117); +#222116 = CARTESIAN_POINT('',(139.348809,-62.804819,1.585)); +#222117 = VECTOR('',#222118,1.); +#222118 = DIRECTION('',(0.,-1.,0.)); +#222119 = ORIENTED_EDGE('',*,*,#222120,.T.); +#222120 = EDGE_CURVE('',#222113,#222121,#222123,.T.); +#222121 = VERTEX_POINT('',#222122); +#222122 = CARTESIAN_POINT('',(139.574155,-63.73126,1.585)); +#222123 = LINE('',#222124,#222125); +#222124 = CARTESIAN_POINT('',(139.348809,-63.729819,1.585)); +#222125 = VECTOR('',#222126,1.); +#222126 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#222127 = ORIENTED_EDGE('',*,*,#222128,.T.); +#222128 = EDGE_CURVE('',#222121,#222129,#222131,.T.); +#222129 = VERTEX_POINT('',#222130); +#222130 = CARTESIAN_POINT('',(139.559523,-63.879819,1.585)); +#222131 = CIRCLE('',#222132,7.500006711464E-02); +#222132 = AXIS2_PLACEMENT_3D('',#222133,#222134,#222135); +#222133 = CARTESIAN_POINT('',(139.55952306711,-63.80481893288,1.585)); +#222134 = DIRECTION('',(0.,0.,-1.)); +#222135 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#222136 = ORIENTED_EDGE('',*,*,#222137,.T.); +#222137 = EDGE_CURVE('',#222129,#222138,#222140,.T.); +#222138 = VERTEX_POINT('',#222139); +#222139 = CARTESIAN_POINT('',(138.973463,-63.878378,1.585)); +#222140 = LINE('',#222141,#222142); +#222141 = CARTESIAN_POINT('',(139.559523,-63.879819,1.585)); +#222142 = VECTOR('',#222143,1.); +#222143 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#222144 = ORIENTED_EDGE('',*,*,#222145,.T.); +#222145 = EDGE_CURVE('',#222138,#222146,#222148,.T.); +#222146 = VERTEX_POINT('',#222147); +#222147 = CARTESIAN_POINT('',(138.988095,-63.729819,1.585)); +#222148 = CIRCLE('',#222149,7.500006711464E-02); +#222149 = AXIS2_PLACEMENT_3D('',#222150,#222151,#222152); +#222150 = CARTESIAN_POINT('',(138.98809493288,-63.80481906711,1.585)); +#222151 = DIRECTION('',(0.,0.,-1.)); +#222152 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#222153 = ORIENTED_EDGE('',*,*,#222154,.T.); +#222154 = EDGE_CURVE('',#222146,#222155,#222157,.T.); +#222155 = VERTEX_POINT('',#222156); +#222156 = CARTESIAN_POINT('',(139.198809,-63.729819,1.585)); +#222157 = LINE('',#222158,#222159); +#222158 = CARTESIAN_POINT('',(138.988095,-63.729819,1.585)); +#222159 = VECTOR('',#222160,1.); +#222160 = DIRECTION('',(1.,0.,0.)); +#222161 = ORIENTED_EDGE('',*,*,#222162,.T.); +#222162 = EDGE_CURVE('',#222155,#222163,#222165,.T.); +#222163 = VERTEX_POINT('',#222164); +#222164 = CARTESIAN_POINT('',(139.198809,-63.033504,1.585)); +#222165 = LINE('',#222166,#222167); +#222166 = CARTESIAN_POINT('',(139.198809,-63.729819,1.585)); +#222167 = VECTOR('',#222168,1.); +#222168 = DIRECTION('',(0.,1.,0.)); +#222169 = ORIENTED_EDGE('',*,*,#222170,.T.); +#222170 = EDGE_CURVE('',#222163,#222171,#222173,.T.); +#222171 = VERTEX_POINT('',#222172); +#222172 = CARTESIAN_POINT('',(139.123173,-63.106031,1.585)); +#222173 = LINE('',#222174,#222175); +#222174 = CARTESIAN_POINT('',(139.198809,-63.033504,1.585)); +#222175 = VECTOR('',#222176,1.); +#222176 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#222177 = ORIENTED_EDGE('',*,*,#222178,.T.); +#222178 = EDGE_CURVE('',#222171,#222179,#222181,.T.); +#222179 = VERTEX_POINT('',#222180); +#222180 = CARTESIAN_POINT('',(139.007904,-63.16287,1.585)); +#222181 = LINE('',#222182,#222183); +#222182 = CARTESIAN_POINT('',(139.123173,-63.106031,1.585)); +#222183 = VECTOR('',#222184,1.); +#222184 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#222185 = ORIENTED_EDGE('',*,*,#222186,.T.); +#222186 = EDGE_CURVE('',#222179,#222187,#222189,.T.); +#222187 = VERTEX_POINT('',#222188); +#222188 = CARTESIAN_POINT('',(138.954554,-63.023451,1.585)); +#222189 = CIRCLE('',#222190,7.500005272361E-02); +#222190 = AXIS2_PLACEMENT_3D('',#222191,#222192,#222193); +#222191 = CARTESIAN_POINT('',(138.98809455676,-63.09053332972,1.585)); +#222192 = DIRECTION('',(0.,0.,-1.)); +#222193 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#222194 = ORIENTED_EDGE('',*,*,#222195,.T.); +#222195 = EDGE_CURVE('',#222187,#222196,#222198,.T.); +#222196 = VERTEX_POINT('',#222197); +#222197 = CARTESIAN_POINT('',(139.038906,-62.981275,1.585)); +#222198 = LINE('',#222199,#222200); +#222199 = CARTESIAN_POINT('',(138.954554,-63.023451,1.585)); +#222200 = VECTOR('',#222201,1.); +#222201 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#222202 = ORIENTED_EDGE('',*,*,#222203,.T.); +#222203 = EDGE_CURVE('',#222196,#222204,#222206,.T.); +#222204 = VERTEX_POINT('',#222205); +#222205 = CARTESIAN_POINT('',(139.120285,-62.899896,1.585)); +#222206 = LINE('',#222207,#222208); +#222207 = CARTESIAN_POINT('',(139.038906,-62.981275,1.585)); +#222208 = VECTOR('',#222209,1.); +#222209 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#222210 = ORIENTED_EDGE('',*,*,#222211,.T.); +#222211 = EDGE_CURVE('',#222204,#222086,#222212,.T.); +#222212 = LINE('',#222213,#222214); +#222213 = CARTESIAN_POINT('',(139.120285,-62.899896,1.585)); +#222214 = VECTOR('',#222215,1.); +#222215 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#222216 = PLANE('',#222217); +#222217 = AXIS2_PLACEMENT_3D('',#222218,#222219,#222220); +#222218 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222219 = DIRECTION('',(0.,0.,1.)); +#222220 = DIRECTION('',(1.,0.,-0.)); +#222221 = SHELL_BASED_SURFACE_MODEL('',(#222222)); +#222222 = OPEN_SHELL('',(#222223)); +#222223 = ADVANCED_FACE('',(#222224),#222268,.T.); +#222224 = FACE_BOUND('',#222225,.F.); +#222225 = EDGE_LOOP('',(#222226,#222237,#222245,#222254,#222262)); +#222226 = ORIENTED_EDGE('',*,*,#222227,.T.); +#222227 = EDGE_CURVE('',#222228,#222230,#222232,.T.); +#222228 = VERTEX_POINT('',#222229); +#222229 = CARTESIAN_POINT('',(182.376217,-62.910139,1.585)); +#222230 = VERTEX_POINT('',#222231); +#222231 = CARTESIAN_POINT('',(182.49165,-62.9331,1.585)); +#222232 = CIRCLE('',#222233,6.000007318647E-02); +#222233 = AXIS2_PLACEMENT_3D('',#222234,#222235,#222236); +#222234 = CARTESIAN_POINT('',(182.43164992681,-62.93309982331,1.585)); +#222235 = DIRECTION('',(0.,0.,-1.)); +#222236 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#222237 = ORIENTED_EDGE('',*,*,#222238,.T.); +#222238 = EDGE_CURVE('',#222230,#222239,#222241,.T.); +#222239 = VERTEX_POINT('',#222240); +#222240 = CARTESIAN_POINT('',(182.49165,-63.7131,1.585)); +#222241 = LINE('',#222242,#222243); +#222242 = CARTESIAN_POINT('',(182.49165,-62.9331,1.585)); +#222243 = VECTOR('',#222244,1.); +#222244 = DIRECTION('',(0.,-1.,0.)); +#222245 = ORIENTED_EDGE('',*,*,#222246,.T.); +#222246 = EDGE_CURVE('',#222239,#222247,#222249,.T.); +#222247 = VERTEX_POINT('',#222248); +#222248 = CARTESIAN_POINT('',(182.37165,-63.7131,1.585)); +#222249 = CIRCLE('',#222250,6.000000000043E-02); +#222250 = AXIS2_PLACEMENT_3D('',#222251,#222252,#222253); +#222251 = CARTESIAN_POINT('',(182.43165,-63.71310022558,1.585)); +#222252 = DIRECTION('',(0.,0.,-1.)); +#222253 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#222254 = ORIENTED_EDGE('',*,*,#222255,.T.); +#222255 = EDGE_CURVE('',#222247,#222256,#222258,.T.); +#222256 = VERTEX_POINT('',#222257); +#222257 = CARTESIAN_POINT('',(182.37165,-62.9331,1.585)); +#222258 = LINE('',#222259,#222260); +#222259 = CARTESIAN_POINT('',(182.37165,-63.7131,1.585)); +#222260 = VECTOR('',#222261,1.); +#222261 = DIRECTION('',(0.,1.,0.)); +#222262 = ORIENTED_EDGE('',*,*,#222263,.T.); +#222263 = EDGE_CURVE('',#222256,#222228,#222264,.T.); +#222264 = LINE('',#222265,#222266); +#222265 = CARTESIAN_POINT('',(182.37165,-62.9331,1.585)); +#222266 = VECTOR('',#222267,1.); +#222267 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#222268 = PLANE('',#222269); +#222269 = AXIS2_PLACEMENT_3D('',#222270,#222271,#222272); +#222270 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222271 = DIRECTION('',(0.,0.,1.)); +#222272 = DIRECTION('',(1.,0.,-0.)); +#222273 = SHELL_BASED_SURFACE_MODEL('',(#222274)); +#222274 = OPEN_SHELL('',(#222275)); +#222275 = ADVANCED_FACE('',(#222276,#222464),#222598,.T.); +#222276 = FACE_BOUND('',#222277,.F.); +#222277 = EDGE_LOOP('',(#222278,#222289,#222297,#222305,#222313,#222321, + #222329,#222337,#222345,#222353,#222361,#222370,#222378,#222386, + #222394,#222402,#222410,#222418,#222426,#222434,#222442,#222450, + #222458)); +#222278 = ORIENTED_EDGE('',*,*,#222279,.T.); +#222279 = EDGE_CURVE('',#222280,#222282,#222284,.T.); +#222280 = VERTEX_POINT('',#222281); +#222281 = CARTESIAN_POINT('',(144.793497,-62.239318,1.585)); +#222282 = VERTEX_POINT('',#222283); +#222283 = CARTESIAN_POINT('',(145.261568,-62.244686,1.585)); +#222284 = CIRCLE('',#222285,0.397578964435); +#222285 = AXIS2_PLACEMENT_3D('',#222286,#222287,#222288); +#222286 = CARTESIAN_POINT('',(145.02384697212,-62.56336726061,1.585)); +#222287 = DIRECTION('',(0.,0.,-1.)); +#222288 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#222289 = ORIENTED_EDGE('',*,*,#222290,.T.); +#222290 = EDGE_CURVE('',#222282,#222291,#222293,.T.); +#222291 = VERTEX_POINT('',#222292); +#222292 = CARTESIAN_POINT('',(145.371884,-62.356008,1.585)); +#222293 = LINE('',#222294,#222295); +#222294 = CARTESIAN_POINT('',(145.261568,-62.244686,1.585)); +#222295 = VECTOR('',#222296,1.); +#222296 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#222297 = ORIENTED_EDGE('',*,*,#222298,.T.); +#222298 = EDGE_CURVE('',#222291,#222299,#222301,.T.); +#222299 = VERTEX_POINT('',#222300); +#222300 = CARTESIAN_POINT('',(145.382284,-62.379486,1.585)); +#222301 = LINE('',#222302,#222303); +#222302 = CARTESIAN_POINT('',(145.371884,-62.356008,1.585)); +#222303 = VECTOR('',#222304,1.); +#222304 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#222305 = ORIENTED_EDGE('',*,*,#222306,.T.); +#222306 = EDGE_CURVE('',#222299,#222307,#222309,.T.); +#222307 = VERTEX_POINT('',#222308); +#222308 = CARTESIAN_POINT('',(145.432142,-62.588152,1.585)); +#222309 = LINE('',#222310,#222311); +#222310 = CARTESIAN_POINT('',(145.382284,-62.379486,1.585)); +#222311 = VECTOR('',#222312,1.); +#222312 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#222313 = ORIENTED_EDGE('',*,*,#222314,.T.); +#222314 = EDGE_CURVE('',#222307,#222315,#222317,.T.); +#222315 = VERTEX_POINT('',#222316); +#222316 = CARTESIAN_POINT('',(145.429903,-62.939675,1.585)); +#222317 = LINE('',#222318,#222319); +#222318 = CARTESIAN_POINT('',(145.432142,-62.588152,1.585)); +#222319 = VECTOR('',#222320,1.); +#222320 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#222321 = ORIENTED_EDGE('',*,*,#222322,.T.); +#222322 = EDGE_CURVE('',#222315,#222323,#222325,.T.); +#222323 = VERTEX_POINT('',#222324); +#222324 = CARTESIAN_POINT('',(145.377337,-63.143997,1.585)); +#222325 = LINE('',#222326,#222327); +#222326 = CARTESIAN_POINT('',(145.429903,-62.939675,1.585)); +#222327 = VECTOR('',#222328,1.); +#222328 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#222329 = ORIENTED_EDGE('',*,*,#222330,.T.); +#222330 = EDGE_CURVE('',#222323,#222331,#222333,.T.); +#222331 = VERTEX_POINT('',#222332); +#222332 = CARTESIAN_POINT('',(145.362557,-63.164993,1.585)); +#222333 = LINE('',#222334,#222335); +#222334 = CARTESIAN_POINT('',(145.377337,-63.143997,1.585)); +#222335 = VECTOR('',#222336,1.); +#222336 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#222337 = ORIENTED_EDGE('',*,*,#222338,.T.); +#222338 = EDGE_CURVE('',#222331,#222339,#222341,.T.); +#222339 = VERTEX_POINT('',#222340); +#222340 = CARTESIAN_POINT('',(145.32035,-63.207199,1.585)); +#222341 = LINE('',#222342,#222343); +#222342 = CARTESIAN_POINT('',(145.362557,-63.164993,1.585)); +#222343 = VECTOR('',#222344,1.); +#222344 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#222345 = ORIENTED_EDGE('',*,*,#222346,.T.); +#222346 = EDGE_CURVE('',#222339,#222347,#222349,.T.); +#222347 = VERTEX_POINT('',#222348); +#222348 = CARTESIAN_POINT('',(145.35395,-63.240799,1.585)); +#222349 = LINE('',#222350,#222351); +#222350 = CARTESIAN_POINT('',(145.32035,-63.207199,1.585)); +#222351 = VECTOR('',#222352,1.); +#222352 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#222353 = ORIENTED_EDGE('',*,*,#222354,.T.); +#222354 = EDGE_CURVE('',#222347,#222355,#222357,.T.); +#222355 = VERTEX_POINT('',#222356); +#222356 = CARTESIAN_POINT('',(145.450745,-63.290807,1.585)); +#222357 = LINE('',#222358,#222359); +#222358 = CARTESIAN_POINT('',(145.35395,-63.240799,1.585)); +#222359 = VECTOR('',#222360,1.); +#222360 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#222361 = ORIENTED_EDGE('',*,*,#222362,.T.); +#222362 = EDGE_CURVE('',#222355,#222363,#222365,.T.); +#222363 = VERTEX_POINT('',#222364); +#222364 = CARTESIAN_POINT('',(145.37122,-63.417139,1.585)); +#222365 = CIRCLE('',#222366,7.500029440362E-02); +#222366 = AXIS2_PLACEMENT_3D('',#222367,#222368,#222369); +#222367 = CARTESIAN_POINT('',(145.40476105397,-63.35005664867,1.585)); +#222368 = DIRECTION('',(0.,0.,-1.)); +#222369 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#222370 = ORIENTED_EDGE('',*,*,#222371,.T.); +#222371 = EDGE_CURVE('',#222363,#222372,#222374,.T.); +#222372 = VERTEX_POINT('',#222373); +#222373 = CARTESIAN_POINT('',(145.26224,-63.360191,1.585)); +#222374 = LINE('',#222375,#222376); +#222375 = CARTESIAN_POINT('',(145.37122,-63.417139,1.585)); +#222376 = VECTOR('',#222377,1.); +#222377 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#222378 = ORIENTED_EDGE('',*,*,#222379,.T.); +#222379 = EDGE_CURVE('',#222372,#222380,#222382,.T.); +#222380 = VERTEX_POINT('',#222381); +#222381 = CARTESIAN_POINT('',(145.199476,-63.298457,1.585)); +#222382 = LINE('',#222383,#222384); +#222383 = CARTESIAN_POINT('',(145.26224,-63.360191,1.585)); +#222384 = VECTOR('',#222385,1.); +#222385 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#222386 = ORIENTED_EDGE('',*,*,#222387,.T.); +#222387 = EDGE_CURVE('',#222380,#222388,#222390,.T.); +#222388 = VERTEX_POINT('',#222389); +#222389 = CARTESIAN_POINT('',(145.133679,-63.328378,1.585)); +#222390 = LINE('',#222391,#222392); +#222391 = CARTESIAN_POINT('',(145.199476,-63.298457,1.585)); +#222392 = VECTOR('',#222393,1.); +#222393 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#222394 = ORIENTED_EDGE('',*,*,#222395,.T.); +#222395 = EDGE_CURVE('',#222388,#222396,#222398,.T.); +#222396 = VERTEX_POINT('',#222397); +#222397 = CARTESIAN_POINT('',(144.908761,-63.327156,1.585)); +#222398 = LINE('',#222399,#222400); +#222399 = CARTESIAN_POINT('',(145.133679,-63.328378,1.585)); +#222400 = VECTOR('',#222401,1.); +#222401 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#222402 = ORIENTED_EDGE('',*,*,#222403,.T.); +#222403 = EDGE_CURVE('',#222396,#222404,#222406,.T.); +#222404 = VERTEX_POINT('',#222405); +#222405 = CARTESIAN_POINT('',(144.78605,-63.264953,1.585)); +#222406 = LINE('',#222407,#222408); +#222407 = CARTESIAN_POINT('',(144.908761,-63.327156,1.585)); +#222408 = VECTOR('',#222409,1.); +#222409 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#222410 = ORIENTED_EDGE('',*,*,#222411,.T.); +#222411 = EDGE_CURVE('',#222404,#222412,#222414,.T.); +#222412 = VERTEX_POINT('',#222413); +#222413 = CARTESIAN_POINT('',(144.675734,-63.153628,1.585)); +#222414 = LINE('',#222415,#222416); +#222415 = CARTESIAN_POINT('',(144.78605,-63.264953,1.585)); +#222416 = VECTOR('',#222417,1.); +#222417 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#222418 = ORIENTED_EDGE('',*,*,#222419,.T.); +#222419 = EDGE_CURVE('',#222412,#222420,#222422,.T.); +#222420 = VERTEX_POINT('',#222421); +#222421 = CARTESIAN_POINT('',(144.665334,-63.130151,1.585)); +#222422 = LINE('',#222423,#222424); +#222423 = CARTESIAN_POINT('',(144.675734,-63.153628,1.585)); +#222424 = VECTOR('',#222425,1.); +#222425 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#222426 = ORIENTED_EDGE('',*,*,#222427,.T.); +#222427 = EDGE_CURVE('',#222420,#222428,#222430,.T.); +#222428 = VERTEX_POINT('',#222429); +#222429 = CARTESIAN_POINT('',(144.615476,-62.921485,1.585)); +#222430 = LINE('',#222431,#222432); +#222431 = CARTESIAN_POINT('',(144.665334,-63.130151,1.585)); +#222432 = VECTOR('',#222433,1.); +#222433 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#222434 = ORIENTED_EDGE('',*,*,#222435,.T.); +#222435 = EDGE_CURVE('',#222428,#222436,#222438,.T.); +#222436 = VERTEX_POINT('',#222437); +#222437 = CARTESIAN_POINT('',(144.617715,-62.569962,1.585)); +#222438 = LINE('',#222439,#222440); +#222439 = CARTESIAN_POINT('',(144.615476,-62.921485,1.585)); +#222440 = VECTOR('',#222441,1.); +#222441 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#222442 = ORIENTED_EDGE('',*,*,#222443,.T.); +#222443 = EDGE_CURVE('',#222436,#222444,#222446,.T.); +#222444 = VERTEX_POINT('',#222445); +#222445 = CARTESIAN_POINT('',(144.670281,-62.36564,1.585)); +#222446 = LINE('',#222447,#222448); +#222447 = CARTESIAN_POINT('',(144.617715,-62.569962,1.585)); +#222448 = VECTOR('',#222449,1.); +#222449 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#222450 = ORIENTED_EDGE('',*,*,#222451,.T.); +#222451 = EDGE_CURVE('',#222444,#222452,#222454,.T.); +#222452 = VERTEX_POINT('',#222453); +#222453 = CARTESIAN_POINT('',(144.685062,-62.344643,1.585)); +#222454 = LINE('',#222455,#222456); +#222455 = CARTESIAN_POINT('',(144.670281,-62.36564,1.585)); +#222456 = VECTOR('',#222457,1.); +#222457 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#222458 = ORIENTED_EDGE('',*,*,#222459,.T.); +#222459 = EDGE_CURVE('',#222452,#222280,#222460,.T.); +#222460 = LINE('',#222461,#222462); +#222461 = CARTESIAN_POINT('',(144.685062,-62.344643,1.585)); +#222462 = VECTOR('',#222463,1.); +#222463 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#222464 = FACE_BOUND('',#222465,.F.); +#222465 = EDGE_LOOP('',(#222466,#222477,#222485,#222494,#222502,#222510, + #222518,#222526,#222534,#222542,#222551,#222559,#222567,#222575, + #222583,#222592)); +#222466 = ORIENTED_EDGE('',*,*,#222467,.T.); +#222467 = EDGE_CURVE('',#222468,#222470,#222472,.T.); +#222468 = VERTEX_POINT('',#222469); +#222469 = CARTESIAN_POINT('',(145.169858,-62.364077,1.585)); +#222470 = VERTEX_POINT('',#222471); +#222471 = CARTESIAN_POINT('',(144.87776,-62.364077,1.585)); +#222472 = CIRCLE('',#222473,0.252889603602); +#222473 = AXIS2_PLACEMENT_3D('',#222474,#222475,#222476); +#222474 = CARTESIAN_POINT('',(145.023809,-62.57053,1.585)); +#222475 = DIRECTION('',(0.,0.,1.)); +#222476 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#222477 = ORIENTED_EDGE('',*,*,#222478,.T.); +#222478 = EDGE_CURVE('',#222470,#222479,#222481,.T.); +#222479 = VERTEX_POINT('',#222480); +#222480 = CARTESIAN_POINT('',(144.805817,-62.436019,1.585)); +#222481 = LINE('',#222482,#222483); +#222482 = CARTESIAN_POINT('',(144.87776,-62.364077,1.585)); +#222483 = VECTOR('',#222484,1.); +#222484 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#222485 = ORIENTED_EDGE('',*,*,#222486,.T.); +#222486 = EDGE_CURVE('',#222479,#222487,#222489,.T.); +#222487 = VERTEX_POINT('',#222488); +#222488 = CARTESIAN_POINT('',(144.805817,-63.073617,1.585)); +#222489 = CIRCLE('',#222490,0.985308713638); +#222490 = AXIS2_PLACEMENT_3D('',#222491,#222492,#222493); +#222491 = CARTESIAN_POINT('',(145.7381262077,-62.754818,1.585)); +#222492 = DIRECTION('',(0.,0.,1.)); +#222493 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#222494 = ORIENTED_EDGE('',*,*,#222495,.T.); +#222495 = EDGE_CURVE('',#222487,#222496,#222498,.T.); +#222496 = VERTEX_POINT('',#222497); +#222497 = CARTESIAN_POINT('',(144.87776,-63.145561,1.585)); +#222498 = LINE('',#222499,#222500); +#222499 = CARTESIAN_POINT('',(144.805817,-63.073617,1.585)); +#222500 = VECTOR('',#222501,1.); +#222501 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#222502 = ORIENTED_EDGE('',*,*,#222503,.T.); +#222503 = EDGE_CURVE('',#222496,#222504,#222506,.T.); +#222504 = VERTEX_POINT('',#222505); +#222505 = CARTESIAN_POINT('',(144.946276,-63.179819,1.585)); +#222506 = LINE('',#222507,#222508); +#222507 = CARTESIAN_POINT('',(144.87776,-63.145561,1.585)); +#222508 = VECTOR('',#222509,1.); +#222509 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#222510 = ORIENTED_EDGE('',*,*,#222511,.T.); +#222511 = EDGE_CURVE('',#222504,#222512,#222514,.T.); +#222512 = VERTEX_POINT('',#222513); +#222513 = CARTESIAN_POINT('',(145.080839,-63.179819,1.585)); +#222514 = LINE('',#222515,#222516); +#222515 = CARTESIAN_POINT('',(144.946276,-63.179819,1.585)); +#222516 = VECTOR('',#222517,1.); +#222517 = DIRECTION('',(1.,0.,0.)); +#222518 = ORIENTED_EDGE('',*,*,#222519,.T.); +#222519 = EDGE_CURVE('',#222512,#222520,#222522,.T.); +#222520 = VERTEX_POINT('',#222521); +#222521 = CARTESIAN_POINT('',(145.027,-63.12598,1.585)); +#222522 = LINE('',#222523,#222524); +#222523 = CARTESIAN_POINT('',(145.080839,-63.179819,1.585)); +#222524 = VECTOR('',#222525,1.); +#222525 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#222526 = ORIENTED_EDGE('',*,*,#222527,.T.); +#222527 = EDGE_CURVE('',#222520,#222528,#222530,.T.); +#222528 = VERTEX_POINT('',#222529); +#222529 = CARTESIAN_POINT('',(144.958485,-63.091723,1.585)); +#222530 = LINE('',#222531,#222532); +#222531 = CARTESIAN_POINT('',(145.027,-63.12598,1.585)); +#222532 = VECTOR('',#222533,1.); +#222533 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#222534 = ORIENTED_EDGE('',*,*,#222535,.T.); +#222535 = EDGE_CURVE('',#222528,#222536,#222538,.T.); +#222536 = VERTEX_POINT('',#222537); +#222537 = CARTESIAN_POINT('',(144.86632,-63.090282,1.585)); +#222538 = LINE('',#222539,#222540); +#222539 = CARTESIAN_POINT('',(144.958485,-63.091723,1.585)); +#222540 = VECTOR('',#222541,1.); +#222541 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#222542 = ORIENTED_EDGE('',*,*,#222543,.T.); +#222543 = EDGE_CURVE('',#222536,#222544,#222546,.T.); +#222544 = VERTEX_POINT('',#222545); +#222545 = CARTESIAN_POINT('',(144.880952,-62.941723,1.585)); +#222546 = CIRCLE('',#222547,7.500006711464E-02); +#222547 = AXIS2_PLACEMENT_3D('',#222548,#222549,#222550); +#222548 = CARTESIAN_POINT('',(144.88095193288,-63.01672306711,1.585)); +#222549 = DIRECTION('',(0.,0.,-1.)); +#222550 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#222551 = ORIENTED_EDGE('',*,*,#222552,.T.); +#222552 = EDGE_CURVE('',#222544,#222553,#222555,.T.); +#222553 = VERTEX_POINT('',#222554); +#222554 = CARTESIAN_POINT('',(144.995999,-62.944386,1.585)); +#222555 = LINE('',#222556,#222557); +#222556 = CARTESIAN_POINT('',(144.880952,-62.941723,1.585)); +#222557 = VECTOR('',#222558,1.); +#222558 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#222559 = ORIENTED_EDGE('',*,*,#222560,.T.); +#222560 = EDGE_CURVE('',#222553,#222561,#222563,.T.); +#222561 = VERTEX_POINT('',#222562); +#222562 = CARTESIAN_POINT('',(145.118711,-63.00659,1.585)); +#222563 = LINE('',#222564,#222565); +#222564 = CARTESIAN_POINT('',(144.995999,-62.944386,1.585)); +#222565 = VECTOR('',#222566,1.); +#222566 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#222567 = ORIENTED_EDGE('',*,*,#222568,.T.); +#222568 = EDGE_CURVE('',#222561,#222569,#222571,.T.); +#222569 = VERTEX_POINT('',#222570); +#222570 = CARTESIAN_POINT('',(145.214284,-63.101133,1.585)); +#222571 = LINE('',#222572,#222573); +#222572 = CARTESIAN_POINT('',(145.118711,-63.00659,1.585)); +#222573 = VECTOR('',#222574,1.); +#222574 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#222575 = ORIENTED_EDGE('',*,*,#222576,.T.); +#222576 = EDGE_CURVE('',#222569,#222577,#222579,.T.); +#222577 = VERTEX_POINT('',#222578); +#222578 = CARTESIAN_POINT('',(145.2418,-63.073617,1.585)); +#222579 = LINE('',#222580,#222581); +#222580 = CARTESIAN_POINT('',(145.214284,-63.101133,1.585)); +#222581 = VECTOR('',#222582,1.); +#222582 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#222583 = ORIENTED_EDGE('',*,*,#222584,.T.); +#222584 = EDGE_CURVE('',#222577,#222585,#222587,.T.); +#222585 = VERTEX_POINT('',#222586); +#222586 = CARTESIAN_POINT('',(145.2418,-62.436019,1.585)); +#222587 = CIRCLE('',#222588,0.985282207897); +#222588 = AXIS2_PLACEMENT_3D('',#222589,#222590,#222591); +#222589 = CARTESIAN_POINT('',(144.30951880486,-62.754818,1.585)); +#222590 = DIRECTION('',(0.,-0.,1.)); +#222591 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#222592 = ORIENTED_EDGE('',*,*,#222593,.T.); +#222593 = EDGE_CURVE('',#222585,#222468,#222594,.T.); +#222594 = LINE('',#222595,#222596); +#222595 = CARTESIAN_POINT('',(145.2418,-62.436019,1.585)); +#222596 = VECTOR('',#222597,1.); +#222597 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#222598 = PLANE('',#222599); +#222599 = AXIS2_PLACEMENT_3D('',#222600,#222601,#222602); +#222600 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222601 = DIRECTION('',(0.,0.,1.)); +#222602 = DIRECTION('',(1.,0.,-0.)); +#222603 = SHELL_BASED_SURFACE_MODEL('',(#222604)); +#222604 = OPEN_SHELL('',(#222605)); +#222605 = ADVANCED_FACE('',(#222606),#222666,.T.); +#222606 = FACE_BOUND('',#222607,.F.); +#222607 = EDGE_LOOP('',(#222608,#222619,#222627,#222635,#222643,#222651, + #222660)); +#222608 = ORIENTED_EDGE('',*,*,#222609,.T.); +#222609 = EDGE_CURVE('',#222610,#222612,#222614,.T.); +#222610 = VERTEX_POINT('',#222611); +#222611 = CARTESIAN_POINT('',(181.65165,-63.3331,1.585)); +#222612 = VERTEX_POINT('',#222613); +#222613 = CARTESIAN_POINT('',(181.603126,-63.23781,1.585)); +#222614 = CIRCLE('',#222615,6.000027696175E-02); +#222615 = AXIS2_PLACEMENT_3D('',#222616,#222617,#222618); +#222616 = CARTESIAN_POINT('',(181.65165092846,-63.27309972304,1.585)); +#222617 = DIRECTION('',(0.,0.,-1.)); +#222618 = DIRECTION('',(-1.547440206489E-05,-0.99999999988,-0.)); +#222619 = ORIENTED_EDGE('',*,*,#222620,.T.); +#222620 = EDGE_CURVE('',#222612,#222621,#222623,.T.); +#222621 = VERTEX_POINT('',#222622); +#222622 = CARTESIAN_POINT('',(181.843126,-62.90781,1.585)); +#222623 = LINE('',#222624,#222625); +#222624 = CARTESIAN_POINT('',(181.603126,-63.23781,1.585)); +#222625 = VECTOR('',#222626,1.); +#222626 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#222627 = ORIENTED_EDGE('',*,*,#222628,.T.); +#222628 = EDGE_CURVE('',#222621,#222629,#222631,.T.); +#222629 = VERTEX_POINT('',#222630); +#222630 = CARTESIAN_POINT('',(181.882292,-62.883834,1.585)); +#222631 = LINE('',#222632,#222633); +#222632 = CARTESIAN_POINT('',(181.843126,-62.90781,1.585)); +#222633 = VECTOR('',#222634,1.); +#222634 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#222635 = ORIENTED_EDGE('',*,*,#222636,.T.); +#222636 = EDGE_CURVE('',#222629,#222637,#222639,.T.); +#222637 = VERTEX_POINT('',#222638); +#222638 = CARTESIAN_POINT('',(181.92694,-62.894576,1.585)); +#222639 = LINE('',#222640,#222641); +#222640 = CARTESIAN_POINT('',(181.882292,-62.883834,1.585)); +#222641 = VECTOR('',#222642,1.); +#222642 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#222643 = ORIENTED_EDGE('',*,*,#222644,.T.); +#222644 = EDGE_CURVE('',#222637,#222645,#222647,.T.); +#222645 = VERTEX_POINT('',#222646); +#222646 = CARTESIAN_POINT('',(182.180174,-63.23781,1.585)); +#222647 = LINE('',#222648,#222649); +#222648 = CARTESIAN_POINT('',(181.92694,-62.894576,1.585)); +#222649 = VECTOR('',#222650,1.); +#222650 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#222651 = ORIENTED_EDGE('',*,*,#222652,.T.); +#222652 = EDGE_CURVE('',#222645,#222653,#222655,.T.); +#222653 = VERTEX_POINT('',#222654); +#222654 = CARTESIAN_POINT('',(182.13165,-63.3331,1.585)); +#222655 = CIRCLE('',#222656,5.999941814204E-02); +#222656 = AXIS2_PLACEMENT_3D('',#222657,#222658,#222659); +#222657 = CARTESIAN_POINT('',(182.13165075805,-63.27310058186,1.585)); +#222658 = DIRECTION('',(0.,0.,-1.)); +#222659 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#222660 = ORIENTED_EDGE('',*,*,#222661,.T.); +#222661 = EDGE_CURVE('',#222653,#222610,#222662,.T.); +#222662 = LINE('',#222663,#222664); +#222663 = CARTESIAN_POINT('',(182.13165,-63.3331,1.585)); +#222664 = VECTOR('',#222665,1.); +#222665 = DIRECTION('',(-1.,0.,0.)); +#222666 = PLANE('',#222667); +#222667 = AXIS2_PLACEMENT_3D('',#222668,#222669,#222670); +#222668 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222669 = DIRECTION('',(0.,0.,1.)); +#222670 = DIRECTION('',(1.,0.,-0.)); +#222671 = SHELL_BASED_SURFACE_MODEL('',(#222672)); +#222672 = OPEN_SHELL('',(#222673)); +#222673 = ADVANCED_FACE('',(#222674),#222869,.T.); +#222674 = FACE_BOUND('',#222675,.F.); +#222675 = EDGE_LOOP('',(#222676,#222687,#222695,#222704,#222712,#222720, + #222728,#222736,#222745,#222753,#222762,#222770,#222778,#222786, + #222795,#222803,#222812,#222820,#222829,#222837,#222846,#222854, + #222863)); +#222676 = ORIENTED_EDGE('',*,*,#222677,.T.); +#222677 = EDGE_CURVE('',#222678,#222680,#222682,.T.); +#222678 = VERTEX_POINT('',#222679); +#222679 = CARTESIAN_POINT('',(145.713976,-62.23294,1.585)); +#222680 = VERTEX_POINT('',#222681); +#222681 = CARTESIAN_POINT('',(145.785714,-62.179819,1.585)); +#222682 = CIRCLE('',#222683,7.500336100772E-02); +#222683 = AXIS2_PLACEMENT_3D('',#222684,#222685,#222686); +#222684 = CARTESIAN_POINT('',(145.7857162707,-62.25482236097,1.585)); +#222685 = DIRECTION('',(0.,0.,-1.)); +#222686 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#222687 = ORIENTED_EDGE('',*,*,#222688,.T.); +#222688 = EDGE_CURVE('',#222680,#222689,#222691,.T.); +#222689 = VERTEX_POINT('',#222690); +#222690 = CARTESIAN_POINT('',(146.276536,-62.18126,1.585)); +#222691 = LINE('',#222692,#222693); +#222692 = CARTESIAN_POINT('',(145.785714,-62.179819,1.585)); +#222693 = VECTOR('',#222694,1.); +#222694 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#222695 = ORIENTED_EDGE('',*,*,#222696,.T.); +#222696 = EDGE_CURVE('',#222689,#222697,#222699,.T.); +#222697 = VERTEX_POINT('',#222698); +#222698 = CARTESIAN_POINT('',(146.261904,-62.329819,1.585)); +#222699 = CIRCLE('',#222700,7.500006711465E-02); +#222700 = AXIS2_PLACEMENT_3D('',#222701,#222702,#222703); +#222701 = CARTESIAN_POINT('',(146.26190406711,-62.25481893288,1.585)); +#222702 = DIRECTION('',(0.,0.,-1.)); +#222703 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#222704 = ORIENTED_EDGE('',*,*,#222705,.T.); +#222705 = EDGE_CURVE('',#222697,#222706,#222708,.T.); +#222706 = VERTEX_POINT('',#222707); +#222707 = CARTESIAN_POINT('',(145.853588,-62.329819,1.585)); +#222708 = LINE('',#222709,#222710); +#222709 = CARTESIAN_POINT('',(146.261904,-62.329819,1.585)); +#222710 = VECTOR('',#222711,1.); +#222711 = DIRECTION('',(-1.,0.,0.)); +#222712 = ORIENTED_EDGE('',*,*,#222713,.T.); +#222713 = EDGE_CURVE('',#222706,#222714,#222716,.T.); +#222714 = VERTEX_POINT('',#222715); +#222715 = CARTESIAN_POINT('',(145.828769,-62.578009,1.585)); +#222716 = LINE('',#222717,#222718); +#222717 = CARTESIAN_POINT('',(145.853588,-62.329819,1.585)); +#222718 = VECTOR('',#222719,1.); +#222719 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#222720 = ORIENTED_EDGE('',*,*,#222721,.T.); +#222721 = EDGE_CURVE('',#222714,#222722,#222724,.T.); +#222722 = VERTEX_POINT('',#222723); +#222723 = CARTESIAN_POINT('',(145.86632,-62.562212,1.585)); +#222724 = LINE('',#222725,#222726); +#222725 = CARTESIAN_POINT('',(145.828769,-62.578009,1.585)); +#222726 = VECTOR('',#222727,1.); +#222727 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#222728 = ORIENTED_EDGE('',*,*,#222729,.T.); +#222729 = EDGE_CURVE('',#222722,#222730,#222732,.T.); +#222730 = VERTEX_POINT('',#222731); +#222731 = CARTESIAN_POINT('',(146.138856,-62.563434,1.585)); +#222732 = LINE('',#222733,#222734); +#222733 = CARTESIAN_POINT('',(145.86632,-62.562212,1.585)); +#222734 = VECTOR('',#222735,1.); +#222735 = DIRECTION('',(0.99998994787,-4.483766241139E-03,0.)); +#222736 = ORIENTED_EDGE('',*,*,#222737,.T.); +#222737 = EDGE_CURVE('',#222730,#222738,#222740,.T.); +#222738 = VERTEX_POINT('',#222739); +#222739 = CARTESIAN_POINT('',(146.383082,-62.811615,1.585)); +#222740 = CIRCLE('',#222741,0.348625649748); +#222741 = AXIS2_PLACEMENT_3D('',#222742,#222743,#222744); +#222742 = CARTESIAN_POINT('',(146.04568404586,-62.89937868387,1.585)); +#222743 = DIRECTION('',(0.,0.,-1.)); +#222744 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#222745 = ORIENTED_EDGE('',*,*,#222746,.T.); +#222746 = EDGE_CURVE('',#222738,#222747,#222749,.T.); +#222747 = VERTEX_POINT('',#222748); +#222748 = CARTESIAN_POINT('',(146.38186,-63.084152,1.585)); +#222749 = LINE('',#222750,#222751); +#222750 = CARTESIAN_POINT('',(146.383082,-62.811615,1.585)); +#222751 = VECTOR('',#222752,1.); +#222752 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#222753 = ORIENTED_EDGE('',*,*,#222754,.T.); +#222754 = EDGE_CURVE('',#222747,#222755,#222757,.T.); +#222755 = VERTEX_POINT('',#222756); +#222756 = CARTESIAN_POINT('',(146.133679,-63.328378,1.585)); +#222757 = CIRCLE('',#222758,0.348635327447); +#222758 = AXIS2_PLACEMENT_3D('',#222759,#222760,#222761); +#222759 = CARTESIAN_POINT('',(146.04590748129,-62.99097208415,1.585)); +#222760 = DIRECTION('',(0.,0.,-1.)); +#222761 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#222762 = ORIENTED_EDGE('',*,*,#222763,.T.); +#222763 = EDGE_CURVE('',#222755,#222764,#222766,.T.); +#222764 = VERTEX_POINT('',#222765); +#222765 = CARTESIAN_POINT('',(145.861142,-63.327156,1.585)); +#222766 = LINE('',#222767,#222768); +#222767 = CARTESIAN_POINT('',(146.133679,-63.328378,1.585)); +#222768 = VECTOR('',#222769,1.); +#222769 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#222770 = ORIENTED_EDGE('',*,*,#222771,.T.); +#222771 = EDGE_CURVE('',#222764,#222772,#222774,.T.); +#222772 = VERTEX_POINT('',#222773); +#222773 = CARTESIAN_POINT('',(145.738429,-63.26495,1.585)); +#222774 = LINE('',#222775,#222776); +#222775 = CARTESIAN_POINT('',(145.861142,-63.327156,1.585)); +#222776 = VECTOR('',#222777,1.); +#222777 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#222778 = ORIENTED_EDGE('',*,*,#222779,.T.); +#222779 = EDGE_CURVE('',#222772,#222780,#222782,.T.); +#222780 = VERTEX_POINT('',#222781); +#222781 = CARTESIAN_POINT('',(145.675734,-63.201247,1.585)); +#222782 = LINE('',#222783,#222784); +#222783 = CARTESIAN_POINT('',(145.738429,-63.26495,1.585)); +#222784 = VECTOR('',#222785,1.); +#222785 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#222786 = ORIENTED_EDGE('',*,*,#222787,.T.); +#222787 = EDGE_CURVE('',#222780,#222788,#222790,.T.); +#222788 = VERTEX_POINT('',#222789); +#222789 = CARTESIAN_POINT('',(145.791129,-63.106548,1.585)); +#222790 = CIRCLE('',#222791,7.50001266804E-02); +#222791 = AXIS2_PLACEMENT_3D('',#222792,#222793,#222794); +#222792 = CARTESIAN_POINT('',(145.73809505199,-63.15958024831,1.585)); +#222793 = DIRECTION('',(0.,0.,-1.)); +#222794 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#222795 = ORIENTED_EDGE('',*,*,#222796,.T.); +#222796 = EDGE_CURVE('',#222788,#222797,#222799,.T.); +#222797 = VERTEX_POINT('',#222798); +#222798 = CARTESIAN_POINT('',(145.830141,-63.145561,1.585)); +#222799 = LINE('',#222800,#222801); +#222800 = CARTESIAN_POINT('',(145.791129,-63.106548,1.585)); +#222801 = VECTOR('',#222802,1.); +#222802 = DIRECTION('',(0.707097718561,-0.707115843696,0.)); +#222803 = ORIENTED_EDGE('',*,*,#222804,.T.); +#222804 = EDGE_CURVE('',#222797,#222805,#222807,.T.); +#222805 = VERTEX_POINT('',#222806); +#222806 = CARTESIAN_POINT('',(146.169857,-63.145561,1.585)); +#222807 = CIRCLE('',#222808,0.305620374329); +#222808 = AXIS2_PLACEMENT_3D('',#222809,#222810,#222811); +#222809 = CARTESIAN_POINT('',(145.999999,-62.89149,1.585)); +#222810 = DIRECTION('',(0.,0.,1.)); +#222811 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#222812 = ORIENTED_EDGE('',*,*,#222813,.T.); +#222813 = EDGE_CURVE('',#222805,#222814,#222816,.T.); +#222814 = VERTEX_POINT('',#222815); +#222815 = CARTESIAN_POINT('',(146.200264,-63.115153,1.585)); +#222816 = LINE('',#222817,#222818); +#222817 = CARTESIAN_POINT('',(146.169857,-63.145561,1.585)); +#222818 = VECTOR('',#222819,1.); +#222819 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#222820 = ORIENTED_EDGE('',*,*,#222821,.T.); +#222821 = EDGE_CURVE('',#222814,#222822,#222824,.T.); +#222822 = VERTEX_POINT('',#222823); +#222823 = CARTESIAN_POINT('',(146.200265,-62.775436,1.585)); +#222824 = CIRCLE('',#222825,0.305616146029); +#222825 = AXIS2_PLACEMENT_3D('',#222826,#222827,#222828); +#222826 = CARTESIAN_POINT('',(145.94619892049,-62.94529375212,1.585)); +#222827 = DIRECTION('',(0.,-0.,1.)); +#222828 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#222829 = ORIENTED_EDGE('',*,*,#222830,.T.); +#222830 = EDGE_CURVE('',#222822,#222831,#222833,.T.); +#222831 = VERTEX_POINT('',#222832); +#222832 = CARTESIAN_POINT('',(146.169858,-62.745029,1.585)); +#222833 = LINE('',#222834,#222835); +#222834 = CARTESIAN_POINT('',(146.200265,-62.775436,1.585)); +#222835 = VECTOR('',#222836,1.); +#222836 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#222837 = ORIENTED_EDGE('',*,*,#222838,.T.); +#222838 = EDGE_CURVE('',#222831,#222839,#222841,.T.); +#222839 = VERTEX_POINT('',#222840); +#222840 = CARTESIAN_POINT('',(145.830141,-62.745029,1.585)); +#222841 = CIRCLE('',#222842,0.305621483548); +#222842 = AXIS2_PLACEMENT_3D('',#222843,#222844,#222845); +#222843 = CARTESIAN_POINT('',(145.9999995,-62.999101,1.585)); +#222844 = DIRECTION('',(0.,0.,1.)); +#222845 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#222846 = ORIENTED_EDGE('',*,*,#222847,.T.); +#222847 = EDGE_CURVE('',#222839,#222848,#222850,.T.); +#222848 = VERTEX_POINT('',#222849); +#222849 = CARTESIAN_POINT('',(145.773351,-62.797206,1.585)); +#222850 = LINE('',#222851,#222852); +#222851 = CARTESIAN_POINT('',(145.830141,-62.745029,1.585)); +#222852 = VECTOR('',#222853,1.); +#222853 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#222854 = ORIENTED_EDGE('',*,*,#222855,.T.); +#222855 = EDGE_CURVE('',#222848,#222856,#222858,.T.); +#222856 = VERTEX_POINT('',#222857); +#222857 = CARTESIAN_POINT('',(145.663445,-62.738249,1.585)); +#222858 = CIRCLE('',#222859,7.500024172471E-02); +#222859 = AXIS2_PLACEMENT_3D('',#222860,#222861,#222862); +#222860 = CARTESIAN_POINT('',(145.73809497002,-62.73100895619,1.585)); +#222861 = DIRECTION('',(-0.,0.,-1.)); +#222862 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#222863 = ORIENTED_EDGE('',*,*,#222864,.T.); +#222864 = EDGE_CURVE('',#222856,#222678,#222865,.T.); +#222865 = LINE('',#222866,#222867); +#222866 = CARTESIAN_POINT('',(145.663445,-62.738249,1.585)); +#222867 = VECTOR('',#222868,1.); +#222868 = DIRECTION('',(9.950391398791E-02,0.995037170713,0.)); +#222869 = PLANE('',#222870); +#222870 = AXIS2_PLACEMENT_3D('',#222871,#222872,#222873); +#222871 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222872 = DIRECTION('',(0.,0.,1.)); +#222873 = DIRECTION('',(1.,0.,-0.)); +#222874 = SHELL_BASED_SURFACE_MODEL('',(#222875)); +#222875 = OPEN_SHELL('',(#222876)); +#222876 = ADVANCED_FACE('',(#222877),#222971,.T.); +#222877 = FACE_BOUND('',#222878,.F.); +#222878 = EDGE_LOOP('',(#222879,#222890,#222898,#222907,#222915,#222924, + #222932,#222941,#222949,#222957,#222965)); +#222879 = ORIENTED_EDGE('',*,*,#222880,.T.); +#222880 = EDGE_CURVE('',#222881,#222883,#222885,.T.); +#222881 = VERTEX_POINT('',#222882); +#222882 = CARTESIAN_POINT('',(99.896217,-61.860139,1.585)); +#222883 = VERTEX_POINT('',#222884); +#222884 = CARTESIAN_POINT('',(100.01165,-61.8831,1.585)); +#222885 = CIRCLE('',#222886,6.000007318648E-02); +#222886 = AXIS2_PLACEMENT_3D('',#222887,#222888,#222889); +#222887 = CARTESIAN_POINT('',(99.951649926814,-61.88309982331,1.585)); +#222888 = DIRECTION('',(0.,0.,-1.)); +#222889 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#222890 = ORIENTED_EDGE('',*,*,#222891,.T.); +#222891 = EDGE_CURVE('',#222883,#222892,#222894,.T.); +#222892 = VERTEX_POINT('',#222893); +#222893 = CARTESIAN_POINT('',(100.01165,-62.8831,1.585)); +#222894 = LINE('',#222895,#222896); +#222895 = CARTESIAN_POINT('',(100.01165,-61.8831,1.585)); +#222896 = VECTOR('',#222897,1.); +#222897 = DIRECTION('',(0.,-1.,0.)); +#222898 = ORIENTED_EDGE('',*,*,#222899,.T.); +#222899 = EDGE_CURVE('',#222892,#222900,#222902,.T.); +#222900 = VERTEX_POINT('',#222901); +#222901 = CARTESIAN_POINT('',(99.95165,-62.9431,1.585)); +#222902 = CIRCLE('',#222903,5.999932016262E-02); +#222903 = AXIS2_PLACEMENT_3D('',#222904,#222905,#222906); +#222904 = CARTESIAN_POINT('',(99.951650679841,-62.88310067984,1.585)); +#222905 = DIRECTION('',(0.,0.,-1.)); +#222906 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#222907 = ORIENTED_EDGE('',*,*,#222908,.T.); +#222908 = EDGE_CURVE('',#222900,#222909,#222911,.T.); +#222909 = VERTEX_POINT('',#222910); +#222910 = CARTESIAN_POINT('',(98.43165,-62.9431,1.585)); +#222911 = LINE('',#222912,#222913); +#222912 = CARTESIAN_POINT('',(99.95165,-62.9431,1.585)); +#222913 = VECTOR('',#222914,1.); +#222914 = DIRECTION('',(-1.,0.,0.)); +#222915 = ORIENTED_EDGE('',*,*,#222916,.T.); +#222916 = EDGE_CURVE('',#222909,#222917,#222919,.T.); +#222917 = VERTEX_POINT('',#222918); +#222918 = CARTESIAN_POINT('',(98.37165,-62.8831,1.585)); +#222919 = CIRCLE('',#222920,5.999932016259E-02); +#222920 = AXIS2_PLACEMENT_3D('',#222921,#222922,#222923); +#222921 = CARTESIAN_POINT('',(98.431649320159,-62.88310067984,1.585)); +#222922 = DIRECTION('',(0.,0.,-1.)); +#222923 = DIRECTION('',(1.133081612142E-05,-0.999999999936,0.)); +#222924 = ORIENTED_EDGE('',*,*,#222925,.T.); +#222925 = EDGE_CURVE('',#222917,#222926,#222928,.T.); +#222926 = VERTEX_POINT('',#222927); +#222927 = CARTESIAN_POINT('',(98.37165,-62.8331,1.585)); +#222928 = LINE('',#222929,#222930); +#222929 = CARTESIAN_POINT('',(98.37165,-62.8831,1.585)); +#222930 = VECTOR('',#222931,1.); +#222931 = DIRECTION('',(0.,1.,0.)); +#222932 = ORIENTED_EDGE('',*,*,#222933,.T.); +#222933 = EDGE_CURVE('',#222926,#222934,#222936,.T.); +#222934 = VERTEX_POINT('',#222935); +#222935 = CARTESIAN_POINT('',(98.487083,-62.810139,1.585)); +#222936 = CIRCLE('',#222937,6.000007318647E-02); +#222937 = AXIS2_PLACEMENT_3D('',#222938,#222939,#222940); +#222938 = CARTESIAN_POINT('',(98.431650073186,-62.83309982331,1.585)); +#222939 = DIRECTION('',(0.,0.,-1.)); +#222940 = DIRECTION('',(-0.999999999996,-2.944769366859E-06,-0.)); +#222941 = ORIENTED_EDGE('',*,*,#222942,.T.); +#222942 = EDGE_CURVE('',#222934,#222943,#222945,.T.); +#222943 = VERTEX_POINT('',#222944); +#222944 = CARTESIAN_POINT('',(98.489661,-62.8231,1.585)); +#222945 = LINE('',#222946,#222947); +#222946 = CARTESIAN_POINT('',(98.487083,-62.810139,1.585)); +#222947 = VECTOR('',#222948,1.); +#222948 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#222949 = ORIENTED_EDGE('',*,*,#222950,.T.); +#222950 = EDGE_CURVE('',#222943,#222951,#222953,.T.); +#222951 = VERTEX_POINT('',#222952); +#222952 = CARTESIAN_POINT('',(99.89165,-62.8231,1.585)); +#222953 = LINE('',#222954,#222955); +#222954 = CARTESIAN_POINT('',(98.489661,-62.8231,1.585)); +#222955 = VECTOR('',#222956,1.); +#222956 = DIRECTION('',(1.,0.,0.)); +#222957 = ORIENTED_EDGE('',*,*,#222958,.T.); +#222958 = EDGE_CURVE('',#222951,#222959,#222961,.T.); +#222959 = VERTEX_POINT('',#222960); +#222960 = CARTESIAN_POINT('',(99.89165,-61.8831,1.585)); +#222961 = LINE('',#222962,#222963); +#222962 = CARTESIAN_POINT('',(99.89165,-62.8231,1.585)); +#222963 = VECTOR('',#222964,1.); +#222964 = DIRECTION('',(0.,1.,0.)); +#222965 = ORIENTED_EDGE('',*,*,#222966,.T.); +#222966 = EDGE_CURVE('',#222959,#222881,#222967,.T.); +#222967 = LINE('',#222968,#222969); +#222968 = CARTESIAN_POINT('',(99.89165,-61.8831,1.585)); +#222969 = VECTOR('',#222970,1.); +#222970 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#222971 = PLANE('',#222972); +#222972 = AXIS2_PLACEMENT_3D('',#222973,#222974,#222975); +#222973 = CARTESIAN_POINT('',(0.,0.,1.585)); +#222974 = DIRECTION('',(0.,0.,1.)); +#222975 = DIRECTION('',(1.,0.,-0.)); +#222976 = SHELL_BASED_SURFACE_MODEL('',(#222977)); +#222977 = OPEN_SHELL('',(#222978)); +#222978 = ADVANCED_FACE('',(#222979),#223065,.T.); +#222979 = FACE_BOUND('',#222980,.F.); +#222980 = EDGE_LOOP('',(#222981,#222992,#223000,#223009,#223017,#223026, + #223034,#223043,#223051,#223059)); +#222981 = ORIENTED_EDGE('',*,*,#222982,.T.); +#222982 = EDGE_CURVE('',#222983,#222985,#222987,.T.); +#222983 = VERTEX_POINT('',#222984); +#222984 = CARTESIAN_POINT('',(198.04165,-60.8831,1.585)); +#222985 = VERTEX_POINT('',#222986); +#222986 = CARTESIAN_POINT('',(198.04165,-60.7631,1.585)); +#222987 = CIRCLE('',#222988,6.000000000043E-02); +#222988 = AXIS2_PLACEMENT_3D('',#222989,#222990,#222991); +#222989 = CARTESIAN_POINT('',(198.04164977441,-60.8231,1.585)); +#222990 = DIRECTION('',(0.,0.,-1.)); +#222991 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#222992 = ORIENTED_EDGE('',*,*,#222993,.T.); +#222993 = EDGE_CURVE('',#222985,#222994,#222996,.T.); +#222994 = VERTEX_POINT('',#222995); +#222995 = CARTESIAN_POINT('',(202.05165,-60.7631,1.585)); +#222996 = LINE('',#222997,#222998); +#222997 = CARTESIAN_POINT('',(198.04165,-60.7631,1.585)); +#222998 = VECTOR('',#222999,1.); +#222999 = DIRECTION('',(1.,0.,0.)); +#223000 = ORIENTED_EDGE('',*,*,#223001,.T.); +#223001 = EDGE_CURVE('',#222994,#223002,#223004,.T.); +#223002 = VERTEX_POINT('',#223003); +#223003 = CARTESIAN_POINT('',(202.11165,-60.8231,1.585)); +#223004 = CIRCLE('',#223005,5.999932016259E-02); +#223005 = AXIS2_PLACEMENT_3D('',#223006,#223007,#223008); +#223006 = CARTESIAN_POINT('',(202.05165067984,-60.82309932015,1.585)); +#223007 = DIRECTION('',(0.,0.,-1.)); +#223008 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#223009 = ORIENTED_EDGE('',*,*,#223010,.T.); +#223010 = EDGE_CURVE('',#223002,#223011,#223013,.T.); +#223011 = VERTEX_POINT('',#223012); +#223012 = CARTESIAN_POINT('',(202.11165,-62.8231,1.585)); +#223013 = LINE('',#223014,#223015); +#223014 = CARTESIAN_POINT('',(202.11165,-60.8231,1.585)); +#223015 = VECTOR('',#223016,1.); +#223016 = DIRECTION('',(0.,-1.,0.)); +#223017 = ORIENTED_EDGE('',*,*,#223018,.T.); +#223018 = EDGE_CURVE('',#223011,#223019,#223021,.T.); +#223019 = VERTEX_POINT('',#223020); +#223020 = CARTESIAN_POINT('',(202.05165,-62.8831,1.585)); +#223021 = CIRCLE('',#223022,5.999932016262E-02); +#223022 = AXIS2_PLACEMENT_3D('',#223023,#223024,#223025); +#223023 = CARTESIAN_POINT('',(202.05165067984,-62.82310067984,1.585)); +#223024 = DIRECTION('',(0.,0.,-1.)); +#223025 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#223026 = ORIENTED_EDGE('',*,*,#223027,.T.); +#223027 = EDGE_CURVE('',#223019,#223028,#223030,.T.); +#223028 = VERTEX_POINT('',#223029); +#223029 = CARTESIAN_POINT('',(198.04165,-62.8831,1.585)); +#223030 = LINE('',#223031,#223032); +#223031 = CARTESIAN_POINT('',(202.05165,-62.8831,1.585)); +#223032 = VECTOR('',#223033,1.); +#223033 = DIRECTION('',(-1.,0.,0.)); +#223034 = ORIENTED_EDGE('',*,*,#223035,.T.); +#223035 = EDGE_CURVE('',#223028,#223036,#223038,.T.); +#223036 = VERTEX_POINT('',#223037); +#223037 = CARTESIAN_POINT('',(198.04165,-62.7631,1.585)); +#223038 = CIRCLE('',#223039,6.000000000043E-02); +#223039 = AXIS2_PLACEMENT_3D('',#223040,#223041,#223042); +#223040 = CARTESIAN_POINT('',(198.04164977441,-62.8231,1.585)); +#223041 = DIRECTION('',(0.,0.,-1.)); +#223042 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#223043 = ORIENTED_EDGE('',*,*,#223044,.T.); +#223044 = EDGE_CURVE('',#223036,#223045,#223047,.T.); +#223045 = VERTEX_POINT('',#223046); +#223046 = CARTESIAN_POINT('',(201.99165,-62.7631,1.585)); +#223047 = LINE('',#223048,#223049); +#223048 = CARTESIAN_POINT('',(198.04165,-62.7631,1.585)); +#223049 = VECTOR('',#223050,1.); +#223050 = DIRECTION('',(1.,0.,0.)); +#223051 = ORIENTED_EDGE('',*,*,#223052,.T.); +#223052 = EDGE_CURVE('',#223045,#223053,#223055,.T.); +#223053 = VERTEX_POINT('',#223054); +#223054 = CARTESIAN_POINT('',(201.99165,-60.8831,1.585)); +#223055 = LINE('',#223056,#223057); +#223056 = CARTESIAN_POINT('',(201.99165,-62.7631,1.585)); +#223057 = VECTOR('',#223058,1.); +#223058 = DIRECTION('',(0.,1.,0.)); +#223059 = ORIENTED_EDGE('',*,*,#223060,.T.); +#223060 = EDGE_CURVE('',#223053,#222983,#223061,.T.); +#223061 = LINE('',#223062,#223063); +#223062 = CARTESIAN_POINT('',(201.99165,-60.8831,1.585)); +#223063 = VECTOR('',#223064,1.); +#223064 = DIRECTION('',(-1.,0.,0.)); +#223065 = PLANE('',#223066); +#223066 = AXIS2_PLACEMENT_3D('',#223067,#223068,#223069); +#223067 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223068 = DIRECTION('',(0.,0.,1.)); +#223069 = DIRECTION('',(1.,0.,-0.)); +#223070 = SHELL_BASED_SURFACE_MODEL('',(#223071)); +#223071 = OPEN_SHELL('',(#223072)); +#223072 = ADVANCED_FACE('',(#223073),#223159,.T.); +#223073 = FACE_BOUND('',#223074,.F.); +#223074 = EDGE_LOOP('',(#223075,#223086,#223094,#223103,#223111,#223120, + #223128,#223136,#223144,#223153)); +#223075 = ORIENTED_EDGE('',*,*,#223076,.T.); +#223076 = EDGE_CURVE('',#223077,#223079,#223081,.T.); +#223077 = VERTEX_POINT('',#223078); +#223078 = CARTESIAN_POINT('',(182.37165,-61.7631,1.585)); +#223079 = VERTEX_POINT('',#223080); +#223080 = CARTESIAN_POINT('',(182.43165,-61.7031,1.585)); +#223081 = CIRCLE('',#223082,5.999932016262E-02); +#223082 = AXIS2_PLACEMENT_3D('',#223083,#223084,#223085); +#223083 = CARTESIAN_POINT('',(182.43164932015,-61.76309932015,1.585)); +#223084 = DIRECTION('',(0.,0.,-1.)); +#223085 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#223086 = ORIENTED_EDGE('',*,*,#223087,.T.); +#223087 = EDGE_CURVE('',#223079,#223088,#223090,.T.); +#223088 = VERTEX_POINT('',#223089); +#223089 = CARTESIAN_POINT('',(183.95165,-61.7031,1.585)); +#223090 = LINE('',#223091,#223092); +#223091 = CARTESIAN_POINT('',(182.43165,-61.7031,1.585)); +#223092 = VECTOR('',#223093,1.); +#223093 = DIRECTION('',(1.,0.,0.)); +#223094 = ORIENTED_EDGE('',*,*,#223095,.T.); +#223095 = EDGE_CURVE('',#223088,#223096,#223098,.T.); +#223096 = VERTEX_POINT('',#223097); +#223097 = CARTESIAN_POINT('',(184.01165,-61.7631,1.585)); +#223098 = CIRCLE('',#223099,5.999932016259E-02); +#223099 = AXIS2_PLACEMENT_3D('',#223100,#223101,#223102); +#223100 = CARTESIAN_POINT('',(183.95165067984,-61.76309932015,1.585)); +#223101 = DIRECTION('',(0.,0.,-1.)); +#223102 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#223103 = ORIENTED_EDGE('',*,*,#223104,.T.); +#223104 = EDGE_CURVE('',#223096,#223105,#223107,.T.); +#223105 = VERTEX_POINT('',#223106); +#223106 = CARTESIAN_POINT('',(184.01165,-62.7631,1.585)); +#223107 = LINE('',#223108,#223109); +#223108 = CARTESIAN_POINT('',(184.01165,-61.7631,1.585)); +#223109 = VECTOR('',#223110,1.); +#223110 = DIRECTION('',(0.,-1.,0.)); +#223111 = ORIENTED_EDGE('',*,*,#223112,.T.); +#223112 = EDGE_CURVE('',#223105,#223113,#223115,.T.); +#223113 = VERTEX_POINT('',#223114); +#223114 = CARTESIAN_POINT('',(183.89165,-62.7631,1.585)); +#223115 = CIRCLE('',#223116,6.000000000042E-02); +#223116 = AXIS2_PLACEMENT_3D('',#223117,#223118,#223119); +#223117 = CARTESIAN_POINT('',(183.95165,-62.76310022558,1.585)); +#223118 = DIRECTION('',(0.,0.,-1.)); +#223119 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#223120 = ORIENTED_EDGE('',*,*,#223121,.T.); +#223121 = EDGE_CURVE('',#223113,#223122,#223124,.T.); +#223122 = VERTEX_POINT('',#223123); +#223123 = CARTESIAN_POINT('',(183.89165,-61.8231,1.585)); +#223124 = LINE('',#223125,#223126); +#223125 = CARTESIAN_POINT('',(183.89165,-62.7631,1.585)); +#223126 = VECTOR('',#223127,1.); +#223127 = DIRECTION('',(0.,1.,0.)); +#223128 = ORIENTED_EDGE('',*,*,#223129,.T.); +#223129 = EDGE_CURVE('',#223122,#223130,#223132,.T.); +#223130 = VERTEX_POINT('',#223131); +#223131 = CARTESIAN_POINT('',(182.489661,-61.8231,1.585)); +#223132 = LINE('',#223133,#223134); +#223133 = CARTESIAN_POINT('',(183.89165,-61.8231,1.585)); +#223134 = VECTOR('',#223135,1.); +#223135 = DIRECTION('',(-1.,0.,0.)); +#223136 = ORIENTED_EDGE('',*,*,#223137,.T.); +#223137 = EDGE_CURVE('',#223130,#223138,#223140,.T.); +#223138 = VERTEX_POINT('',#223139); +#223139 = CARTESIAN_POINT('',(182.487083,-61.836061,1.585)); +#223140 = LINE('',#223141,#223142); +#223141 = CARTESIAN_POINT('',(182.489661,-61.8231,1.585)); +#223142 = VECTOR('',#223143,1.); +#223143 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#223144 = ORIENTED_EDGE('',*,*,#223145,.T.); +#223145 = EDGE_CURVE('',#223138,#223146,#223148,.T.); +#223146 = VERTEX_POINT('',#223147); +#223147 = CARTESIAN_POINT('',(182.37165,-61.8131,1.585)); +#223148 = CIRCLE('',#223149,6.000007318649E-02); +#223149 = AXIS2_PLACEMENT_3D('',#223150,#223151,#223152); +#223150 = CARTESIAN_POINT('',(182.43165007318,-61.81310017668,1.585)); +#223151 = DIRECTION('',(-0.,0.,-1.)); +#223152 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#223153 = ORIENTED_EDGE('',*,*,#223154,.T.); +#223154 = EDGE_CURVE('',#223146,#223077,#223155,.T.); +#223155 = LINE('',#223156,#223157); +#223156 = CARTESIAN_POINT('',(182.37165,-61.8131,1.585)); +#223157 = VECTOR('',#223158,1.); +#223158 = DIRECTION('',(0.,1.,0.)); +#223159 = PLANE('',#223160); +#223160 = AXIS2_PLACEMENT_3D('',#223161,#223162,#223163); +#223161 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223162 = DIRECTION('',(0.,0.,1.)); +#223163 = DIRECTION('',(1.,0.,-0.)); +#223164 = SHELL_BASED_SURFACE_MODEL('',(#223165)); +#223165 = OPEN_SHELL('',(#223166)); +#223166 = ADVANCED_FACE('',(#223167),#223261,.T.); +#223167 = FACE_BOUND('',#223168,.F.); +#223168 = EDGE_LOOP('',(#223169,#223180,#223188,#223197,#223205,#223214, + #223222,#223231,#223239,#223247,#223255)); +#223169 = ORIENTED_EDGE('',*,*,#223170,.T.); +#223170 = EDGE_CURVE('',#223171,#223173,#223175,.T.); +#223171 = VERTEX_POINT('',#223172); +#223172 = CARTESIAN_POINT('',(139.354567,-61.437039,1.585)); +#223173 = VERTEX_POINT('',#223174); +#223174 = CARTESIAN_POINT('',(139.47,-61.46,1.585)); +#223175 = CIRCLE('',#223176,6.000007318647E-02); +#223176 = AXIS2_PLACEMENT_3D('',#223177,#223178,#223179); +#223177 = CARTESIAN_POINT('',(139.40999992681,-61.45999982331,1.585)); +#223178 = DIRECTION('',(0.,0.,-1.)); +#223179 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#223180 = ORIENTED_EDGE('',*,*,#223181,.T.); +#223181 = EDGE_CURVE('',#223173,#223182,#223184,.T.); +#223182 = VERTEX_POINT('',#223183); +#223183 = CARTESIAN_POINT('',(139.47,-62.46,1.585)); +#223184 = LINE('',#223185,#223186); +#223185 = CARTESIAN_POINT('',(139.47,-61.46,1.585)); +#223186 = VECTOR('',#223187,1.); +#223187 = DIRECTION('',(0.,-1.,0.)); +#223188 = ORIENTED_EDGE('',*,*,#223189,.T.); +#223189 = EDGE_CURVE('',#223182,#223190,#223192,.T.); +#223190 = VERTEX_POINT('',#223191); +#223191 = CARTESIAN_POINT('',(139.41,-62.52,1.585)); +#223192 = CIRCLE('',#223193,5.999932016262E-02); +#223193 = AXIS2_PLACEMENT_3D('',#223194,#223195,#223196); +#223194 = CARTESIAN_POINT('',(139.41000067984,-62.46000067984,1.585)); +#223195 = DIRECTION('',(0.,0.,-1.)); +#223196 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#223197 = ORIENTED_EDGE('',*,*,#223198,.T.); +#223198 = EDGE_CURVE('',#223190,#223199,#223201,.T.); +#223199 = VERTEX_POINT('',#223200); +#223200 = CARTESIAN_POINT('',(137.89,-62.52,1.585)); +#223201 = LINE('',#223202,#223203); +#223202 = CARTESIAN_POINT('',(139.41,-62.52,1.585)); +#223203 = VECTOR('',#223204,1.); +#223204 = DIRECTION('',(-1.,0.,0.)); +#223205 = ORIENTED_EDGE('',*,*,#223206,.T.); +#223206 = EDGE_CURVE('',#223199,#223207,#223209,.T.); +#223207 = VERTEX_POINT('',#223208); +#223208 = CARTESIAN_POINT('',(137.83,-62.46,1.585)); +#223209 = CIRCLE('',#223210,5.999932016258E-02); +#223210 = AXIS2_PLACEMENT_3D('',#223211,#223212,#223213); +#223211 = CARTESIAN_POINT('',(137.88999932015,-62.46000067984,1.585)); +#223212 = DIRECTION('',(0.,0.,-1.)); +#223213 = DIRECTION('',(1.133081564773E-05,-0.999999999936,0.)); +#223214 = ORIENTED_EDGE('',*,*,#223215,.T.); +#223215 = EDGE_CURVE('',#223207,#223216,#223218,.T.); +#223216 = VERTEX_POINT('',#223217); +#223217 = CARTESIAN_POINT('',(137.83,-62.41,1.585)); +#223218 = LINE('',#223219,#223220); +#223219 = CARTESIAN_POINT('',(137.83,-62.46,1.585)); +#223220 = VECTOR('',#223221,1.); +#223221 = DIRECTION('',(0.,1.,0.)); +#223222 = ORIENTED_EDGE('',*,*,#223223,.T.); +#223223 = EDGE_CURVE('',#223216,#223224,#223226,.T.); +#223224 = VERTEX_POINT('',#223225); +#223225 = CARTESIAN_POINT('',(137.945433,-62.387039,1.585)); +#223226 = CIRCLE('',#223227,6.000007318647E-02); +#223227 = AXIS2_PLACEMENT_3D('',#223228,#223229,#223230); +#223228 = CARTESIAN_POINT('',(137.89000007318,-62.40999982331,1.585)); +#223229 = DIRECTION('',(0.,0.,-1.)); +#223230 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#223231 = ORIENTED_EDGE('',*,*,#223232,.T.); +#223232 = EDGE_CURVE('',#223224,#223233,#223235,.T.); +#223233 = VERTEX_POINT('',#223234); +#223234 = CARTESIAN_POINT('',(137.948011,-62.4,1.585)); +#223235 = LINE('',#223236,#223237); +#223236 = CARTESIAN_POINT('',(137.945433,-62.387039,1.585)); +#223237 = VECTOR('',#223238,1.); +#223238 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#223239 = ORIENTED_EDGE('',*,*,#223240,.T.); +#223240 = EDGE_CURVE('',#223233,#223241,#223243,.T.); +#223241 = VERTEX_POINT('',#223242); +#223242 = CARTESIAN_POINT('',(139.35,-62.4,1.585)); +#223243 = LINE('',#223244,#223245); +#223244 = CARTESIAN_POINT('',(137.948011,-62.4,1.585)); +#223245 = VECTOR('',#223246,1.); +#223246 = DIRECTION('',(1.,0.,0.)); +#223247 = ORIENTED_EDGE('',*,*,#223248,.T.); +#223248 = EDGE_CURVE('',#223241,#223249,#223251,.T.); +#223249 = VERTEX_POINT('',#223250); +#223250 = CARTESIAN_POINT('',(139.35,-61.46,1.585)); +#223251 = LINE('',#223252,#223253); +#223252 = CARTESIAN_POINT('',(139.35,-62.4,1.585)); +#223253 = VECTOR('',#223254,1.); +#223254 = DIRECTION('',(0.,1.,0.)); +#223255 = ORIENTED_EDGE('',*,*,#223256,.T.); +#223256 = EDGE_CURVE('',#223249,#223171,#223257,.T.); +#223257 = LINE('',#223258,#223259); +#223258 = CARTESIAN_POINT('',(139.35,-61.46,1.585)); +#223259 = VECTOR('',#223260,1.); +#223260 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#223261 = PLANE('',#223262); +#223262 = AXIS2_PLACEMENT_3D('',#223263,#223264,#223265); +#223263 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223264 = DIRECTION('',(0.,0.,1.)); +#223265 = DIRECTION('',(1.,0.,-0.)); +#223266 = SHELL_BASED_SURFACE_MODEL('',(#223267)); +#223267 = OPEN_SHELL('',(#223268)); +#223268 = ADVANCED_FACE('',(#223269),#223305,.T.); +#223269 = FACE_BOUND('',#223270,.F.); +#223270 = EDGE_LOOP('',(#223271,#223282,#223290,#223299)); +#223271 = ORIENTED_EDGE('',*,*,#223272,.T.); +#223272 = EDGE_CURVE('',#223273,#223275,#223277,.T.); +#223273 = VERTEX_POINT('',#223274); +#223274 = CARTESIAN_POINT('',(84.954392,-61.9056,1.585)); +#223275 = VERTEX_POINT('',#223276); +#223276 = CARTESIAN_POINT('',(84.954392,-61.7856,1.585)); +#223277 = CIRCLE('',#223278,6.000000000042E-02); +#223278 = AXIS2_PLACEMENT_3D('',#223279,#223280,#223281); +#223279 = CARTESIAN_POINT('',(84.954391774412,-61.8456,1.585)); +#223280 = DIRECTION('',(0.,0.,-1.)); +#223281 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#223282 = ORIENTED_EDGE('',*,*,#223283,.T.); +#223283 = EDGE_CURVE('',#223275,#223284,#223286,.T.); +#223284 = VERTEX_POINT('',#223285); +#223285 = CARTESIAN_POINT('',(85.428908,-61.7856,1.585)); +#223286 = LINE('',#223287,#223288); +#223287 = CARTESIAN_POINT('',(84.954392,-61.7856,1.585)); +#223288 = VECTOR('',#223289,1.); +#223289 = DIRECTION('',(1.,0.,0.)); +#223290 = ORIENTED_EDGE('',*,*,#223291,.T.); +#223291 = EDGE_CURVE('',#223284,#223292,#223294,.T.); +#223292 = VERTEX_POINT('',#223293); +#223293 = CARTESIAN_POINT('',(85.428908,-61.9056,1.585)); +#223294 = CIRCLE('',#223295,6.000000000042E-02); +#223295 = AXIS2_PLACEMENT_3D('',#223296,#223297,#223298); +#223296 = CARTESIAN_POINT('',(85.428908225588,-61.8456,1.585)); +#223297 = DIRECTION('',(0.,0.,-1.)); +#223298 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#223299 = ORIENTED_EDGE('',*,*,#223300,.T.); +#223300 = EDGE_CURVE('',#223292,#223273,#223301,.T.); +#223301 = LINE('',#223302,#223303); +#223302 = CARTESIAN_POINT('',(85.428908,-61.9056,1.585)); +#223303 = VECTOR('',#223304,1.); +#223304 = DIRECTION('',(-1.,0.,0.)); +#223305 = PLANE('',#223306); +#223306 = AXIS2_PLACEMENT_3D('',#223307,#223308,#223309); +#223307 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223308 = DIRECTION('',(0.,0.,1.)); +#223309 = DIRECTION('',(1.,0.,-0.)); +#223310 = SHELL_BASED_SURFACE_MODEL('',(#223311)); +#223311 = OPEN_SHELL('',(#223312)); +#223312 = ADVANCED_FACE('',(#223313),#223407,.T.); +#223313 = FACE_BOUND('',#223314,.F.); +#223314 = EDGE_LOOP('',(#223315,#223326,#223334,#223343,#223351,#223360, + #223368,#223377,#223385,#223393,#223401)); +#223315 = ORIENTED_EDGE('',*,*,#223316,.T.); +#223316 = EDGE_CURVE('',#223317,#223319,#223321,.T.); +#223317 = VERTEX_POINT('',#223318); +#223318 = CARTESIAN_POINT('',(146.154567,-60.737039,1.585)); +#223319 = VERTEX_POINT('',#223320); +#223320 = CARTESIAN_POINT('',(146.27,-60.76,1.585)); +#223321 = CIRCLE('',#223322,6.000007318649E-02); +#223322 = AXIS2_PLACEMENT_3D('',#223323,#223324,#223325); +#223323 = CARTESIAN_POINT('',(146.20999992681,-60.75999982331,1.585)); +#223324 = DIRECTION('',(0.,0.,-1.)); +#223325 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#223326 = ORIENTED_EDGE('',*,*,#223327,.T.); +#223327 = EDGE_CURVE('',#223319,#223328,#223330,.T.); +#223328 = VERTEX_POINT('',#223329); +#223329 = CARTESIAN_POINT('',(146.27,-61.76,1.585)); +#223330 = LINE('',#223331,#223332); +#223331 = CARTESIAN_POINT('',(146.27,-60.76,1.585)); +#223332 = VECTOR('',#223333,1.); +#223333 = DIRECTION('',(0.,-1.,0.)); +#223334 = ORIENTED_EDGE('',*,*,#223335,.T.); +#223335 = EDGE_CURVE('',#223328,#223336,#223338,.T.); +#223336 = VERTEX_POINT('',#223337); +#223337 = CARTESIAN_POINT('',(146.21,-61.82,1.585)); +#223338 = CIRCLE('',#223339,5.999932016262E-02); +#223339 = AXIS2_PLACEMENT_3D('',#223340,#223341,#223342); +#223340 = CARTESIAN_POINT('',(146.21000067984,-61.76000067984,1.585)); +#223341 = DIRECTION('',(0.,0.,-1.)); +#223342 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#223343 = ORIENTED_EDGE('',*,*,#223344,.T.); +#223344 = EDGE_CURVE('',#223336,#223345,#223347,.T.); +#223345 = VERTEX_POINT('',#223346); +#223346 = CARTESIAN_POINT('',(144.69,-61.82,1.585)); +#223347 = LINE('',#223348,#223349); +#223348 = CARTESIAN_POINT('',(146.21,-61.82,1.585)); +#223349 = VECTOR('',#223350,1.); +#223350 = DIRECTION('',(-1.,0.,0.)); +#223351 = ORIENTED_EDGE('',*,*,#223352,.T.); +#223352 = EDGE_CURVE('',#223345,#223353,#223355,.T.); +#223353 = VERTEX_POINT('',#223354); +#223354 = CARTESIAN_POINT('',(144.63,-61.76,1.585)); +#223355 = CIRCLE('',#223356,5.999932016259E-02); +#223356 = AXIS2_PLACEMENT_3D('',#223357,#223358,#223359); +#223357 = CARTESIAN_POINT('',(144.68999932015,-61.76000067984,1.585)); +#223358 = DIRECTION('',(0.,0.,-1.)); +#223359 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#223360 = ORIENTED_EDGE('',*,*,#223361,.T.); +#223361 = EDGE_CURVE('',#223353,#223362,#223364,.T.); +#223362 = VERTEX_POINT('',#223363); +#223363 = CARTESIAN_POINT('',(144.63,-61.71,1.585)); +#223364 = LINE('',#223365,#223366); +#223365 = CARTESIAN_POINT('',(144.63,-61.76,1.585)); +#223366 = VECTOR('',#223367,1.); +#223367 = DIRECTION('',(0.,1.,0.)); +#223368 = ORIENTED_EDGE('',*,*,#223369,.T.); +#223369 = EDGE_CURVE('',#223362,#223370,#223372,.T.); +#223370 = VERTEX_POINT('',#223371); +#223371 = CARTESIAN_POINT('',(144.745433,-61.687039,1.585)); +#223372 = CIRCLE('',#223373,6.000007318647E-02); +#223373 = AXIS2_PLACEMENT_3D('',#223374,#223375,#223376); +#223374 = CARTESIAN_POINT('',(144.69000007318,-61.70999982331,1.585)); +#223375 = DIRECTION('',(0.,0.,-1.)); +#223376 = DIRECTION('',(-0.999999999996,-2.944769485282E-06,-0.)); +#223377 = ORIENTED_EDGE('',*,*,#223378,.T.); +#223378 = EDGE_CURVE('',#223370,#223379,#223381,.T.); +#223379 = VERTEX_POINT('',#223380); +#223380 = CARTESIAN_POINT('',(144.748011,-61.7,1.585)); +#223381 = LINE('',#223382,#223383); +#223382 = CARTESIAN_POINT('',(144.745433,-61.687039,1.585)); +#223383 = VECTOR('',#223384,1.); +#223384 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#223385 = ORIENTED_EDGE('',*,*,#223386,.T.); +#223386 = EDGE_CURVE('',#223379,#223387,#223389,.T.); +#223387 = VERTEX_POINT('',#223388); +#223388 = CARTESIAN_POINT('',(146.15,-61.7,1.585)); +#223389 = LINE('',#223390,#223391); +#223390 = CARTESIAN_POINT('',(144.748011,-61.7,1.585)); +#223391 = VECTOR('',#223392,1.); +#223392 = DIRECTION('',(1.,0.,0.)); +#223393 = ORIENTED_EDGE('',*,*,#223394,.T.); +#223394 = EDGE_CURVE('',#223387,#223395,#223397,.T.); +#223395 = VERTEX_POINT('',#223396); +#223396 = CARTESIAN_POINT('',(146.15,-60.76,1.585)); +#223397 = LINE('',#223398,#223399); +#223398 = CARTESIAN_POINT('',(146.15,-61.7,1.585)); +#223399 = VECTOR('',#223400,1.); +#223400 = DIRECTION('',(0.,1.,0.)); +#223401 = ORIENTED_EDGE('',*,*,#223402,.T.); +#223402 = EDGE_CURVE('',#223395,#223317,#223403,.T.); +#223403 = LINE('',#223404,#223405); +#223404 = CARTESIAN_POINT('',(146.15,-60.76,1.585)); +#223405 = VECTOR('',#223406,1.); +#223406 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#223407 = PLANE('',#223408); +#223408 = AXIS2_PLACEMENT_3D('',#223409,#223410,#223411); +#223409 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223410 = DIRECTION('',(0.,0.,1.)); +#223411 = DIRECTION('',(1.,0.,-0.)); +#223412 = SHELL_BASED_SURFACE_MODEL('',(#223413)); +#223413 = OPEN_SHELL('',(#223414)); +#223414 = ADVANCED_FACE('',(#223415),#223459,.T.); +#223415 = FACE_BOUND('',#223416,.F.); +#223416 = EDGE_LOOP('',(#223417,#223428,#223436,#223445,#223453)); +#223417 = ORIENTED_EDGE('',*,*,#223418,.T.); +#223418 = EDGE_CURVE('',#223419,#223421,#223423,.T.); +#223419 = VERTEX_POINT('',#223420); +#223420 = CARTESIAN_POINT('',(98.376217,-60.910139,1.585)); +#223421 = VERTEX_POINT('',#223422); +#223422 = CARTESIAN_POINT('',(98.49165,-60.9331,1.585)); +#223423 = CIRCLE('',#223424,6.000007318648E-02); +#223424 = AXIS2_PLACEMENT_3D('',#223425,#223426,#223427); +#223425 = CARTESIAN_POINT('',(98.431649926814,-60.93309982331,1.585)); +#223426 = DIRECTION('',(0.,0.,-1.)); +#223427 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#223428 = ORIENTED_EDGE('',*,*,#223429,.T.); +#223429 = EDGE_CURVE('',#223421,#223430,#223432,.T.); +#223430 = VERTEX_POINT('',#223431); +#223431 = CARTESIAN_POINT('',(98.49165,-61.7131,1.585)); +#223432 = LINE('',#223433,#223434); +#223433 = CARTESIAN_POINT('',(98.49165,-60.9331,1.585)); +#223434 = VECTOR('',#223435,1.); +#223435 = DIRECTION('',(0.,-1.,0.)); +#223436 = ORIENTED_EDGE('',*,*,#223437,.T.); +#223437 = EDGE_CURVE('',#223430,#223438,#223440,.T.); +#223438 = VERTEX_POINT('',#223439); +#223439 = CARTESIAN_POINT('',(98.37165,-61.7131,1.585)); +#223440 = CIRCLE('',#223441,6.000000000043E-02); +#223441 = AXIS2_PLACEMENT_3D('',#223442,#223443,#223444); +#223442 = CARTESIAN_POINT('',(98.43165,-61.71310022558,1.585)); +#223443 = DIRECTION('',(0.,0.,-1.)); +#223444 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#223445 = ORIENTED_EDGE('',*,*,#223446,.T.); +#223446 = EDGE_CURVE('',#223438,#223447,#223449,.T.); +#223447 = VERTEX_POINT('',#223448); +#223448 = CARTESIAN_POINT('',(98.37165,-60.9331,1.585)); +#223449 = LINE('',#223450,#223451); +#223450 = CARTESIAN_POINT('',(98.37165,-61.7131,1.585)); +#223451 = VECTOR('',#223452,1.); +#223452 = DIRECTION('',(0.,1.,0.)); +#223453 = ORIENTED_EDGE('',*,*,#223454,.T.); +#223454 = EDGE_CURVE('',#223447,#223419,#223455,.T.); +#223455 = LINE('',#223456,#223457); +#223456 = CARTESIAN_POINT('',(98.37165,-60.9331,1.585)); +#223457 = VECTOR('',#223458,1.); +#223458 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#223459 = PLANE('',#223460); +#223460 = AXIS2_PLACEMENT_3D('',#223461,#223462,#223463); +#223461 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223462 = DIRECTION('',(0.,0.,1.)); +#223463 = DIRECTION('',(1.,0.,-0.)); +#223464 = SHELL_BASED_SURFACE_MODEL('',(#223465)); +#223465 = OPEN_SHELL('',(#223466)); +#223466 = ADVANCED_FACE('',(#223467,#223655),#223789,.T.); +#223467 = FACE_BOUND('',#223468,.F.); +#223468 = EDGE_LOOP('',(#223469,#223480,#223488,#223496,#223504,#223512, + #223520,#223528,#223536,#223544,#223552,#223561,#223569,#223577, + #223585,#223593,#223601,#223609,#223617,#223625,#223633,#223641, + #223649)); +#223469 = ORIENTED_EDGE('',*,*,#223470,.T.); +#223470 = EDGE_CURVE('',#223471,#223473,#223475,.T.); +#223471 = VERTEX_POINT('',#223472); +#223472 = CARTESIAN_POINT('',(182.485147,-60.362418,1.585)); +#223473 = VERTEX_POINT('',#223474); +#223474 = CARTESIAN_POINT('',(182.953218,-60.367786,1.585)); +#223475 = CIRCLE('',#223476,0.397578964435); +#223476 = AXIS2_PLACEMENT_3D('',#223477,#223478,#223479); +#223477 = CARTESIAN_POINT('',(182.71549697212,-60.68646726061,1.585)); +#223478 = DIRECTION('',(0.,0.,-1.)); +#223479 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#223480 = ORIENTED_EDGE('',*,*,#223481,.T.); +#223481 = EDGE_CURVE('',#223473,#223482,#223484,.T.); +#223482 = VERTEX_POINT('',#223483); +#223483 = CARTESIAN_POINT('',(183.063534,-60.479108,1.585)); +#223484 = LINE('',#223485,#223486); +#223485 = CARTESIAN_POINT('',(182.953218,-60.367786,1.585)); +#223486 = VECTOR('',#223487,1.); +#223487 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#223488 = ORIENTED_EDGE('',*,*,#223489,.T.); +#223489 = EDGE_CURVE('',#223482,#223490,#223492,.T.); +#223490 = VERTEX_POINT('',#223491); +#223491 = CARTESIAN_POINT('',(183.073934,-60.502586,1.585)); +#223492 = LINE('',#223493,#223494); +#223493 = CARTESIAN_POINT('',(183.063534,-60.479108,1.585)); +#223494 = VECTOR('',#223495,1.); +#223495 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#223496 = ORIENTED_EDGE('',*,*,#223497,.T.); +#223497 = EDGE_CURVE('',#223490,#223498,#223500,.T.); +#223498 = VERTEX_POINT('',#223499); +#223499 = CARTESIAN_POINT('',(183.123792,-60.711252,1.585)); +#223500 = LINE('',#223501,#223502); +#223501 = CARTESIAN_POINT('',(183.073934,-60.502586,1.585)); +#223502 = VECTOR('',#223503,1.); +#223503 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#223504 = ORIENTED_EDGE('',*,*,#223505,.T.); +#223505 = EDGE_CURVE('',#223498,#223506,#223508,.T.); +#223506 = VERTEX_POINT('',#223507); +#223507 = CARTESIAN_POINT('',(183.121553,-61.062775,1.585)); +#223508 = LINE('',#223509,#223510); +#223509 = CARTESIAN_POINT('',(183.123792,-60.711252,1.585)); +#223510 = VECTOR('',#223511,1.); +#223511 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#223512 = ORIENTED_EDGE('',*,*,#223513,.T.); +#223513 = EDGE_CURVE('',#223506,#223514,#223516,.T.); +#223514 = VERTEX_POINT('',#223515); +#223515 = CARTESIAN_POINT('',(183.068987,-61.267097,1.585)); +#223516 = LINE('',#223517,#223518); +#223517 = CARTESIAN_POINT('',(183.121553,-61.062775,1.585)); +#223518 = VECTOR('',#223519,1.); +#223519 = DIRECTION('',(-0.249156885797,-0.968463136242,0.)); +#223520 = ORIENTED_EDGE('',*,*,#223521,.T.); +#223521 = EDGE_CURVE('',#223514,#223522,#223524,.T.); +#223522 = VERTEX_POINT('',#223523); +#223523 = CARTESIAN_POINT('',(183.054207,-61.288093,1.585)); +#223524 = LINE('',#223525,#223526); +#223525 = CARTESIAN_POINT('',(183.068987,-61.267097,1.585)); +#223526 = VECTOR('',#223527,1.); +#223527 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#223528 = ORIENTED_EDGE('',*,*,#223529,.T.); +#223529 = EDGE_CURVE('',#223522,#223530,#223532,.T.); +#223530 = VERTEX_POINT('',#223531); +#223531 = CARTESIAN_POINT('',(183.012,-61.330299,1.585)); +#223532 = LINE('',#223533,#223534); +#223533 = CARTESIAN_POINT('',(183.054207,-61.288093,1.585)); +#223534 = VECTOR('',#223535,1.); +#223535 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#223536 = ORIENTED_EDGE('',*,*,#223537,.T.); +#223537 = EDGE_CURVE('',#223530,#223538,#223540,.T.); +#223538 = VERTEX_POINT('',#223539); +#223539 = CARTESIAN_POINT('',(183.0456,-61.363899,1.585)); +#223540 = LINE('',#223541,#223542); +#223541 = CARTESIAN_POINT('',(183.012,-61.330299,1.585)); +#223542 = VECTOR('',#223543,1.); +#223543 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#223544 = ORIENTED_EDGE('',*,*,#223545,.T.); +#223545 = EDGE_CURVE('',#223538,#223546,#223548,.T.); +#223546 = VERTEX_POINT('',#223547); +#223547 = CARTESIAN_POINT('',(183.142395,-61.413907,1.585)); +#223548 = LINE('',#223549,#223550); +#223549 = CARTESIAN_POINT('',(183.0456,-61.363899,1.585)); +#223550 = VECTOR('',#223551,1.); +#223551 = DIRECTION('',(0.888436200035,-0.45900012905,0.)); +#223552 = ORIENTED_EDGE('',*,*,#223553,.T.); +#223553 = EDGE_CURVE('',#223546,#223554,#223556,.T.); +#223554 = VERTEX_POINT('',#223555); +#223555 = CARTESIAN_POINT('',(183.06287,-61.540239,1.585)); +#223556 = CIRCLE('',#223557,7.50002944036E-02); +#223557 = AXIS2_PLACEMENT_3D('',#223558,#223559,#223560); +#223558 = CARTESIAN_POINT('',(183.09641105397,-61.47315664867,1.585)); +#223559 = DIRECTION('',(0.,0.,-1.)); +#223560 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#223561 = ORIENTED_EDGE('',*,*,#223562,.T.); +#223562 = EDGE_CURVE('',#223554,#223563,#223565,.T.); +#223563 = VERTEX_POINT('',#223564); +#223564 = CARTESIAN_POINT('',(182.95389,-61.483291,1.585)); +#223565 = LINE('',#223566,#223567); +#223566 = CARTESIAN_POINT('',(183.06287,-61.540239,1.585)); +#223567 = VECTOR('',#223568,1.); +#223568 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#223569 = ORIENTED_EDGE('',*,*,#223570,.T.); +#223570 = EDGE_CURVE('',#223563,#223571,#223573,.T.); +#223571 = VERTEX_POINT('',#223572); +#223572 = CARTESIAN_POINT('',(182.891126,-61.421557,1.585)); +#223573 = LINE('',#223574,#223575); +#223574 = CARTESIAN_POINT('',(182.95389,-61.483291,1.585)); +#223575 = VECTOR('',#223576,1.); +#223576 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#223577 = ORIENTED_EDGE('',*,*,#223578,.T.); +#223578 = EDGE_CURVE('',#223571,#223579,#223581,.T.); +#223579 = VERTEX_POINT('',#223580); +#223580 = CARTESIAN_POINT('',(182.825329,-61.451478,1.585)); +#223581 = LINE('',#223582,#223583); +#223582 = CARTESIAN_POINT('',(182.891126,-61.421557,1.585)); +#223583 = VECTOR('',#223584,1.); +#223584 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#223585 = ORIENTED_EDGE('',*,*,#223586,.T.); +#223586 = EDGE_CURVE('',#223579,#223587,#223589,.T.); +#223587 = VERTEX_POINT('',#223588); +#223588 = CARTESIAN_POINT('',(182.600411,-61.450256,1.585)); +#223589 = LINE('',#223590,#223591); +#223590 = CARTESIAN_POINT('',(182.825329,-61.451478,1.585)); +#223591 = VECTOR('',#223592,1.); +#223592 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#223593 = ORIENTED_EDGE('',*,*,#223594,.T.); +#223594 = EDGE_CURVE('',#223587,#223595,#223597,.T.); +#223595 = VERTEX_POINT('',#223596); +#223596 = CARTESIAN_POINT('',(182.4777,-61.388053,1.585)); +#223597 = LINE('',#223598,#223599); +#223598 = CARTESIAN_POINT('',(182.600411,-61.450256,1.585)); +#223599 = VECTOR('',#223600,1.); +#223600 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#223601 = ORIENTED_EDGE('',*,*,#223602,.T.); +#223602 = EDGE_CURVE('',#223595,#223603,#223605,.T.); +#223603 = VERTEX_POINT('',#223604); +#223604 = CARTESIAN_POINT('',(182.367384,-61.276728,1.585)); +#223605 = LINE('',#223606,#223607); +#223606 = CARTESIAN_POINT('',(182.4777,-61.388053,1.585)); +#223607 = VECTOR('',#223608,1.); +#223608 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#223609 = ORIENTED_EDGE('',*,*,#223610,.T.); +#223610 = EDGE_CURVE('',#223603,#223611,#223613,.T.); +#223611 = VERTEX_POINT('',#223612); +#223612 = CARTESIAN_POINT('',(182.356984,-61.253251,1.585)); +#223613 = LINE('',#223614,#223615); +#223614 = CARTESIAN_POINT('',(182.367384,-61.276728,1.585)); +#223615 = VECTOR('',#223616,1.); +#223616 = DIRECTION('',(-0.405025228745,0.91430550916,0.)); +#223617 = ORIENTED_EDGE('',*,*,#223618,.T.); +#223618 = EDGE_CURVE('',#223611,#223619,#223621,.T.); +#223619 = VERTEX_POINT('',#223620); +#223620 = CARTESIAN_POINT('',(182.307126,-61.044585,1.585)); +#223621 = LINE('',#223622,#223623); +#223622 = CARTESIAN_POINT('',(182.356984,-61.253251,1.585)); +#223623 = VECTOR('',#223624,1.); +#223624 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#223625 = ORIENTED_EDGE('',*,*,#223626,.T.); +#223626 = EDGE_CURVE('',#223619,#223627,#223629,.T.); +#223627 = VERTEX_POINT('',#223628); +#223628 = CARTESIAN_POINT('',(182.309365,-60.693062,1.585)); +#223629 = LINE('',#223630,#223631); +#223630 = CARTESIAN_POINT('',(182.307126,-61.044585,1.585)); +#223631 = VECTOR('',#223632,1.); +#223632 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#223633 = ORIENTED_EDGE('',*,*,#223634,.T.); +#223634 = EDGE_CURVE('',#223627,#223635,#223637,.T.); +#223635 = VERTEX_POINT('',#223636); +#223636 = CARTESIAN_POINT('',(182.361931,-60.48874,1.585)); +#223637 = LINE('',#223638,#223639); +#223638 = CARTESIAN_POINT('',(182.309365,-60.693062,1.585)); +#223639 = VECTOR('',#223640,1.); +#223640 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#223641 = ORIENTED_EDGE('',*,*,#223642,.T.); +#223642 = EDGE_CURVE('',#223635,#223643,#223645,.T.); +#223643 = VERTEX_POINT('',#223644); +#223644 = CARTESIAN_POINT('',(182.376712,-60.467743,1.585)); +#223645 = LINE('',#223646,#223647); +#223646 = CARTESIAN_POINT('',(182.361931,-60.48874,1.585)); +#223647 = VECTOR('',#223648,1.); +#223648 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#223649 = ORIENTED_EDGE('',*,*,#223650,.T.); +#223650 = EDGE_CURVE('',#223643,#223471,#223651,.T.); +#223651 = LINE('',#223652,#223653); +#223652 = CARTESIAN_POINT('',(182.376712,-60.467743,1.585)); +#223653 = VECTOR('',#223654,1.); +#223654 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#223655 = FACE_BOUND('',#223656,.F.); +#223656 = EDGE_LOOP('',(#223657,#223668,#223676,#223685,#223693,#223701, + #223709,#223717,#223725,#223733,#223742,#223750,#223758,#223766, + #223774,#223783)); +#223657 = ORIENTED_EDGE('',*,*,#223658,.T.); +#223658 = EDGE_CURVE('',#223659,#223661,#223663,.T.); +#223659 = VERTEX_POINT('',#223660); +#223660 = CARTESIAN_POINT('',(182.861508,-60.487177,1.585)); +#223661 = VERTEX_POINT('',#223662); +#223662 = CARTESIAN_POINT('',(182.56941,-60.487177,1.585)); +#223663 = CIRCLE('',#223664,0.252889603602); +#223664 = AXIS2_PLACEMENT_3D('',#223665,#223666,#223667); +#223665 = CARTESIAN_POINT('',(182.715459,-60.69363,1.585)); +#223666 = DIRECTION('',(0.,0.,1.)); +#223667 = DIRECTION('',(0.577520775547,0.816375988017,-0.)); +#223668 = ORIENTED_EDGE('',*,*,#223669,.T.); +#223669 = EDGE_CURVE('',#223661,#223670,#223672,.T.); +#223670 = VERTEX_POINT('',#223671); +#223671 = CARTESIAN_POINT('',(182.497467,-60.559119,1.585)); +#223672 = LINE('',#223673,#223674); +#223673 = CARTESIAN_POINT('',(182.56941,-60.487177,1.585)); +#223674 = VECTOR('',#223675,1.); +#223675 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#223676 = ORIENTED_EDGE('',*,*,#223677,.T.); +#223677 = EDGE_CURVE('',#223670,#223678,#223680,.T.); +#223678 = VERTEX_POINT('',#223679); +#223679 = CARTESIAN_POINT('',(182.497467,-61.196717,1.585)); +#223680 = CIRCLE('',#223681,0.985308713638); +#223681 = AXIS2_PLACEMENT_3D('',#223682,#223683,#223684); +#223682 = CARTESIAN_POINT('',(183.4297762077,-60.877918,1.585)); +#223683 = DIRECTION('',(0.,0.,1.)); +#223684 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#223685 = ORIENTED_EDGE('',*,*,#223686,.T.); +#223686 = EDGE_CURVE('',#223678,#223687,#223689,.T.); +#223687 = VERTEX_POINT('',#223688); +#223688 = CARTESIAN_POINT('',(182.56941,-61.268661,1.585)); +#223689 = LINE('',#223690,#223691); +#223690 = CARTESIAN_POINT('',(182.497467,-61.196717,1.585)); +#223691 = VECTOR('',#223692,1.); +#223692 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#223693 = ORIENTED_EDGE('',*,*,#223694,.T.); +#223694 = EDGE_CURVE('',#223687,#223695,#223697,.T.); +#223695 = VERTEX_POINT('',#223696); +#223696 = CARTESIAN_POINT('',(182.637926,-61.302919,1.585)); +#223697 = LINE('',#223698,#223699); +#223698 = CARTESIAN_POINT('',(182.56941,-61.268661,1.585)); +#223699 = VECTOR('',#223700,1.); +#223700 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#223701 = ORIENTED_EDGE('',*,*,#223702,.T.); +#223702 = EDGE_CURVE('',#223695,#223703,#223705,.T.); +#223703 = VERTEX_POINT('',#223704); +#223704 = CARTESIAN_POINT('',(182.772489,-61.302919,1.585)); +#223705 = LINE('',#223706,#223707); +#223706 = CARTESIAN_POINT('',(182.637926,-61.302919,1.585)); +#223707 = VECTOR('',#223708,1.); +#223708 = DIRECTION('',(1.,0.,0.)); +#223709 = ORIENTED_EDGE('',*,*,#223710,.T.); +#223710 = EDGE_CURVE('',#223703,#223711,#223713,.T.); +#223711 = VERTEX_POINT('',#223712); +#223712 = CARTESIAN_POINT('',(182.71865,-61.24908,1.585)); +#223713 = LINE('',#223714,#223715); +#223714 = CARTESIAN_POINT('',(182.772489,-61.302919,1.585)); +#223715 = VECTOR('',#223716,1.); +#223716 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223717 = ORIENTED_EDGE('',*,*,#223718,.T.); +#223718 = EDGE_CURVE('',#223711,#223719,#223721,.T.); +#223719 = VERTEX_POINT('',#223720); +#223720 = CARTESIAN_POINT('',(182.650135,-61.214823,1.585)); +#223721 = LINE('',#223722,#223723); +#223722 = CARTESIAN_POINT('',(182.71865,-61.24908,1.585)); +#223723 = VECTOR('',#223724,1.); +#223724 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#223725 = ORIENTED_EDGE('',*,*,#223726,.T.); +#223726 = EDGE_CURVE('',#223719,#223727,#223729,.T.); +#223727 = VERTEX_POINT('',#223728); +#223728 = CARTESIAN_POINT('',(182.55797,-61.213382,1.585)); +#223729 = LINE('',#223730,#223731); +#223730 = CARTESIAN_POINT('',(182.650135,-61.214823,1.585)); +#223731 = VECTOR('',#223732,1.); +#223732 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#223733 = ORIENTED_EDGE('',*,*,#223734,.T.); +#223734 = EDGE_CURVE('',#223727,#223735,#223737,.T.); +#223735 = VERTEX_POINT('',#223736); +#223736 = CARTESIAN_POINT('',(182.572602,-61.064823,1.585)); +#223737 = CIRCLE('',#223738,7.500006711464E-02); +#223738 = AXIS2_PLACEMENT_3D('',#223739,#223740,#223741); +#223739 = CARTESIAN_POINT('',(182.57260193288,-61.13982306711,1.585)); +#223740 = DIRECTION('',(0.,0.,-1.)); +#223741 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#223742 = ORIENTED_EDGE('',*,*,#223743,.T.); +#223743 = EDGE_CURVE('',#223735,#223744,#223746,.T.); +#223744 = VERTEX_POINT('',#223745); +#223745 = CARTESIAN_POINT('',(182.687649,-61.067486,1.585)); +#223746 = LINE('',#223747,#223748); +#223747 = CARTESIAN_POINT('',(182.572602,-61.064823,1.585)); +#223748 = VECTOR('',#223749,1.); +#223749 = DIRECTION('',(0.999732214371,-2.314086318526E-02,0.)); +#223750 = ORIENTED_EDGE('',*,*,#223751,.T.); +#223751 = EDGE_CURVE('',#223744,#223752,#223754,.T.); +#223752 = VERTEX_POINT('',#223753); +#223753 = CARTESIAN_POINT('',(182.810361,-61.12969,1.585)); +#223754 = LINE('',#223755,#223756); +#223755 = CARTESIAN_POINT('',(182.687649,-61.067486,1.585)); +#223756 = VECTOR('',#223757,1.); +#223757 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#223758 = ORIENTED_EDGE('',*,*,#223759,.T.); +#223759 = EDGE_CURVE('',#223752,#223760,#223762,.T.); +#223760 = VERTEX_POINT('',#223761); +#223761 = CARTESIAN_POINT('',(182.905934,-61.224233,1.585)); +#223762 = LINE('',#223763,#223764); +#223763 = CARTESIAN_POINT('',(182.810361,-61.12969,1.585)); +#223764 = VECTOR('',#223765,1.); +#223765 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#223766 = ORIENTED_EDGE('',*,*,#223767,.T.); +#223767 = EDGE_CURVE('',#223760,#223768,#223770,.T.); +#223768 = VERTEX_POINT('',#223769); +#223769 = CARTESIAN_POINT('',(182.93345,-61.196717,1.585)); +#223770 = LINE('',#223771,#223772); +#223771 = CARTESIAN_POINT('',(182.905934,-61.224233,1.585)); +#223772 = VECTOR('',#223773,1.); +#223773 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#223774 = ORIENTED_EDGE('',*,*,#223775,.T.); +#223775 = EDGE_CURVE('',#223768,#223776,#223778,.T.); +#223776 = VERTEX_POINT('',#223777); +#223777 = CARTESIAN_POINT('',(182.93345,-60.559119,1.585)); +#223778 = CIRCLE('',#223779,0.985282207896); +#223779 = AXIS2_PLACEMENT_3D('',#223780,#223781,#223782); +#223780 = CARTESIAN_POINT('',(182.00116880486,-60.877918,1.585)); +#223781 = DIRECTION('',(0.,-0.,1.)); +#223782 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#223783 = ORIENTED_EDGE('',*,*,#223784,.T.); +#223784 = EDGE_CURVE('',#223776,#223659,#223785,.T.); +#223785 = LINE('',#223786,#223787); +#223786 = CARTESIAN_POINT('',(182.93345,-60.559119,1.585)); +#223787 = VECTOR('',#223788,1.); +#223788 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223789 = PLANE('',#223790); +#223790 = AXIS2_PLACEMENT_3D('',#223791,#223792,#223793); +#223791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#223792 = DIRECTION('',(0.,0.,1.)); +#223793 = DIRECTION('',(1.,0.,-0.)); +#223794 = SHELL_BASED_SURFACE_MODEL('',(#223795)); +#223795 = OPEN_SHELL('',(#223796)); +#223796 = ADVANCED_FACE('',(#223797,#223940),#224010,.T.); +#223797 = FACE_BOUND('',#223798,.F.); +#223798 = EDGE_LOOP('',(#223799,#223810,#223818,#223826,#223835,#223843, + #223851,#223859,#223867,#223875,#223883,#223891,#223900,#223908, + #223917,#223925,#223934)); +#223799 = ORIENTED_EDGE('',*,*,#223800,.T.); +#223800 = EDGE_CURVE('',#223801,#223803,#223805,.T.); +#223801 = VERTEX_POINT('',#223802); +#223802 = CARTESIAN_POINT('',(183.356984,-60.7883,1.585)); +#223803 = VERTEX_POINT('',#223804); +#223804 = CARTESIAN_POINT('',(183.58668,-60.358456,1.585)); +#223805 = CIRCLE('',#223806,0.610092147705); +#223806 = AXIS2_PLACEMENT_3D('',#223807,#223808,#223809); +#223807 = CARTESIAN_POINT('',(183.96513074024,-60.83698234817,1.585)); +#223808 = DIRECTION('',(0.,0.,-1.)); +#223809 = DIRECTION('',(-0.99681128913,7.979507417357E-02,0.)); +#223810 = ORIENTED_EDGE('',*,*,#223811,.T.); +#223811 = EDGE_CURVE('',#223803,#223812,#223814,.T.); +#223812 = VERTEX_POINT('',#223813); +#223813 = CARTESIAN_POINT('',(183.700827,-60.30436,1.585)); +#223814 = LINE('',#223815,#223816); +#223815 = CARTESIAN_POINT('',(183.58668,-60.358456,1.585)); +#223816 = VECTOR('',#223817,1.); +#223817 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#223818 = ORIENTED_EDGE('',*,*,#223819,.T.); +#223819 = EDGE_CURVE('',#223812,#223820,#223822,.T.); +#223820 = VERTEX_POINT('',#223821); +#223821 = CARTESIAN_POINT('',(183.920567,-60.30436,1.585)); +#223822 = LINE('',#223823,#223824); +#223823 = CARTESIAN_POINT('',(183.700827,-60.30436,1.585)); +#223824 = VECTOR('',#223825,1.); +#223825 = DIRECTION('',(1.,0.,0.)); +#223826 = ORIENTED_EDGE('',*,*,#223827,.T.); +#223827 = EDGE_CURVE('',#223820,#223828,#223830,.T.); +#223828 = VERTEX_POINT('',#223829); +#223829 = CARTESIAN_POINT('',(183.905935,-60.452919,1.585)); +#223830 = CIRCLE('',#223831,7.500006711464E-02); +#223831 = AXIS2_PLACEMENT_3D('',#223832,#223833,#223834); +#223832 = CARTESIAN_POINT('',(183.90593506711,-60.37791893288,1.585)); +#223833 = DIRECTION('',(0.,0.,-1.)); +#223834 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#223835 = ORIENTED_EDGE('',*,*,#223836,.T.); +#223836 = EDGE_CURVE('',#223828,#223837,#223839,.T.); +#223837 = VERTEX_POINT('',#223838); +#223838 = CARTESIAN_POINT('',(183.733164,-60.452919,1.585)); +#223839 = LINE('',#223840,#223841); +#223840 = CARTESIAN_POINT('',(183.905935,-60.452919,1.585)); +#223841 = VECTOR('',#223842,1.); +#223842 = DIRECTION('',(-1.,0.,0.)); +#223843 = ORIENTED_EDGE('',*,*,#223844,.T.); +#223844 = EDGE_CURVE('',#223837,#223845,#223847,.T.); +#223845 = VERTEX_POINT('',#223846); +#223846 = CARTESIAN_POINT('',(183.664648,-60.487177,1.585)); +#223847 = LINE('',#223848,#223849); +#223848 = CARTESIAN_POINT('',(183.733164,-60.452919,1.585)); +#223849 = VECTOR('',#223850,1.); +#223850 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#223851 = ORIENTED_EDGE('',*,*,#223852,.T.); +#223852 = EDGE_CURVE('',#223845,#223853,#223855,.T.); +#223853 = VERTEX_POINT('',#223854); +#223854 = CARTESIAN_POINT('',(183.630886,-60.520938,1.585)); +#223855 = LINE('',#223856,#223857); +#223856 = CARTESIAN_POINT('',(183.664648,-60.487177,1.585)); +#223857 = VECTOR('',#223858,1.); +#223858 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#223859 = ORIENTED_EDGE('',*,*,#223860,.T.); +#223860 = EDGE_CURVE('',#223853,#223861,#223863,.T.); +#223861 = VERTEX_POINT('',#223862); +#223862 = CARTESIAN_POINT('',(183.546974,-60.646807,1.585)); +#223863 = LINE('',#223864,#223865); +#223864 = CARTESIAN_POINT('',(183.630886,-60.520938,1.585)); +#223865 = VECTOR('',#223866,1.); +#223866 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#223867 = ORIENTED_EDGE('',*,*,#223868,.T.); +#223868 = EDGE_CURVE('',#223861,#223869,#223871,.T.); +#223869 = VERTEX_POINT('',#223870); +#223870 = CARTESIAN_POINT('',(183.52845,-60.720904,1.585)); +#223871 = LINE('',#223872,#223873); +#223872 = CARTESIAN_POINT('',(183.546974,-60.646807,1.585)); +#223873 = VECTOR('',#223874,1.); +#223874 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#223875 = ORIENTED_EDGE('',*,*,#223876,.T.); +#223876 = EDGE_CURVE('',#223869,#223877,#223879,.T.); +#223877 = VERTEX_POINT('',#223878); +#223878 = CARTESIAN_POINT('',(183.605589,-60.685312,1.585)); +#223879 = LINE('',#223880,#223881); +#223880 = CARTESIAN_POINT('',(183.52845,-60.720904,1.585)); +#223881 = VECTOR('',#223882,1.); +#223882 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#223883 = ORIENTED_EDGE('',*,*,#223884,.T.); +#223884 = EDGE_CURVE('',#223877,#223885,#223887,.T.); +#223885 = VERTEX_POINT('',#223886); +#223886 = CARTESIAN_POINT('',(183.830506,-60.686534,1.585)); +#223887 = LINE('',#223888,#223889); +#223888 = CARTESIAN_POINT('',(183.605589,-60.685312,1.585)); +#223889 = VECTOR('',#223890,1.); +#223890 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#223891 = ORIENTED_EDGE('',*,*,#223892,.T.); +#223892 = EDGE_CURVE('',#223885,#223893,#223895,.T.); +#223893 = VERTEX_POINT('',#223894); +#223894 = CARTESIAN_POINT('',(184.074732,-60.934715,1.585)); +#223895 = CIRCLE('',#223896,0.348625649748); +#223896 = AXIS2_PLACEMENT_3D('',#223897,#223898,#223899); +#223897 = CARTESIAN_POINT('',(183.73733404586,-61.02247868387,1.585)); +#223898 = DIRECTION('',(0.,0.,-1.)); +#223899 = DIRECTION('',(0.267255017532,0.96362583797,0.)); +#223900 = ORIENTED_EDGE('',*,*,#223901,.T.); +#223901 = EDGE_CURVE('',#223893,#223902,#223904,.T.); +#223902 = VERTEX_POINT('',#223903); +#223903 = CARTESIAN_POINT('',(184.07351,-61.207252,1.585)); +#223904 = LINE('',#223905,#223906); +#223905 = CARTESIAN_POINT('',(184.074732,-60.934715,1.585)); +#223906 = VECTOR('',#223907,1.); +#223907 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#223908 = ORIENTED_EDGE('',*,*,#223909,.T.); +#223909 = EDGE_CURVE('',#223902,#223910,#223912,.T.); +#223910 = VERTEX_POINT('',#223911); +#223911 = CARTESIAN_POINT('',(183.825329,-61.451478,1.585)); +#223912 = CIRCLE('',#223913,0.348635327447); +#223913 = AXIS2_PLACEMENT_3D('',#223914,#223915,#223916); +#223914 = CARTESIAN_POINT('',(183.73755748129,-61.11407208415,1.585)); +#223915 = DIRECTION('',(0.,0.,-1.)); +#223916 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#223917 = ORIENTED_EDGE('',*,*,#223918,.T.); +#223918 = EDGE_CURVE('',#223910,#223919,#223921,.T.); +#223919 = VERTEX_POINT('',#223920); +#223920 = CARTESIAN_POINT('',(183.600411,-61.450256,1.585)); +#223921 = LINE('',#223922,#223923); +#223922 = CARTESIAN_POINT('',(183.825329,-61.451478,1.585)); +#223923 = VECTOR('',#223924,1.); +#223924 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#223925 = ORIENTED_EDGE('',*,*,#223926,.T.); +#223926 = EDGE_CURVE('',#223919,#223927,#223929,.T.); +#223927 = VERTEX_POINT('',#223928); +#223928 = CARTESIAN_POINT('',(183.356186,-61.202074,1.585)); +#223929 = CIRCLE('',#223930,0.348628446662); +#223930 = AXIS2_PLACEMENT_3D('',#223931,#223932,#223933); +#223931 = CARTESIAN_POINT('',(183.69358661322,-61.11430942847,1.585)); +#223932 = DIRECTION('',(0.,0.,-1.)); +#223933 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#223934 = ORIENTED_EDGE('',*,*,#223935,.T.); +#223935 = EDGE_CURVE('',#223927,#223801,#223936,.T.); +#223936 = LINE('',#223937,#223938); +#223937 = CARTESIAN_POINT('',(183.356186,-61.202074,1.585)); +#223938 = VECTOR('',#223939,1.); +#223939 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#223940 = FACE_BOUND('',#223941,.F.); +#223941 = EDGE_LOOP('',(#223942,#223953,#223961,#223970,#223978,#223987, + #223995,#224004)); +#223942 = ORIENTED_EDGE('',*,*,#223943,.T.); +#223943 = EDGE_CURVE('',#223944,#223946,#223948,.T.); +#223944 = VERTEX_POINT('',#223945); +#223945 = CARTESIAN_POINT('',(183.861508,-60.868129,1.585)); +#223946 = VERTEX_POINT('',#223947); +#223947 = CARTESIAN_POINT('',(183.56941,-60.868129,1.585)); +#223948 = CIRCLE('',#223949,0.252889603602); +#223949 = AXIS2_PLACEMENT_3D('',#223950,#223951,#223952); +#223950 = CARTESIAN_POINT('',(183.715459,-61.074582,1.585)); +#223951 = DIRECTION('',(0.,0.,1.)); +#223952 = DIRECTION('',(0.577520775547,0.816375988017,-0.)); +#223953 = ORIENTED_EDGE('',*,*,#223954,.T.); +#223954 = EDGE_CURVE('',#223946,#223955,#223957,.T.); +#223955 = VERTEX_POINT('',#223956); +#223956 = CARTESIAN_POINT('',(183.539003,-60.898536,1.585)); +#223957 = LINE('',#223958,#223959); +#223958 = CARTESIAN_POINT('',(183.56941,-60.868129,1.585)); +#223959 = VECTOR('',#223960,1.); +#223960 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#223961 = ORIENTED_EDGE('',*,*,#223962,.T.); +#223962 = EDGE_CURVE('',#223955,#223963,#223965,.T.); +#223963 = VERTEX_POINT('',#223964); +#223964 = CARTESIAN_POINT('',(183.539003,-61.238253,1.585)); +#223965 = CIRCLE('',#223966,0.305621483548); +#223966 = AXIS2_PLACEMENT_3D('',#223967,#223968,#223969); +#223967 = CARTESIAN_POINT('',(183.793075,-61.0683945,1.585)); +#223968 = DIRECTION('',(0.,0.,1.)); +#223969 = DIRECTION('',(-0.831328992485,0.555780627814,0.)); +#223970 = ORIENTED_EDGE('',*,*,#223971,.T.); +#223971 = EDGE_CURVE('',#223963,#223972,#223974,.T.); +#223972 = VERTEX_POINT('',#223973); +#223973 = CARTESIAN_POINT('',(183.56941,-61.268661,1.585)); +#223974 = LINE('',#223975,#223976); +#223975 = CARTESIAN_POINT('',(183.539003,-61.238253,1.585)); +#223976 = VECTOR('',#223977,1.); +#223977 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#223978 = ORIENTED_EDGE('',*,*,#223979,.T.); +#223979 = EDGE_CURVE('',#223972,#223980,#223982,.T.); +#223980 = VERTEX_POINT('',#223981); +#223981 = CARTESIAN_POINT('',(183.861507,-61.268661,1.585)); +#223982 = CIRCLE('',#223983,0.252888498466); +#223983 = AXIS2_PLACEMENT_3D('',#223984,#223985,#223986); +#223984 = CARTESIAN_POINT('',(183.7154585,-61.062209,1.585)); +#223985 = DIRECTION('',(0.,0.,1.)); +#223986 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#223987 = ORIENTED_EDGE('',*,*,#223988,.T.); +#223988 = EDGE_CURVE('',#223980,#223989,#223991,.T.); +#223989 = VERTEX_POINT('',#223990); +#223990 = CARTESIAN_POINT('',(183.891914,-61.238253,1.585)); +#223991 = LINE('',#223992,#223993); +#223992 = CARTESIAN_POINT('',(183.861507,-61.268661,1.585)); +#223993 = VECTOR('',#223994,1.); +#223994 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#223995 = ORIENTED_EDGE('',*,*,#223996,.T.); +#223996 = EDGE_CURVE('',#223989,#223997,#223999,.T.); +#223997 = VERTEX_POINT('',#223998); +#223998 = CARTESIAN_POINT('',(183.891915,-60.898536,1.585)); +#223999 = CIRCLE('',#224000,0.305616146029); +#224000 = AXIS2_PLACEMENT_3D('',#224001,#224002,#224003); +#224001 = CARTESIAN_POINT('',(183.63784892049,-61.06839375212,1.585)); +#224002 = DIRECTION('',(0.,-0.,1.)); +#224003 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#224004 = ORIENTED_EDGE('',*,*,#224005,.T.); +#224005 = EDGE_CURVE('',#223997,#223944,#224006,.T.); +#224006 = LINE('',#224007,#224008); +#224007 = CARTESIAN_POINT('',(183.891915,-60.898536,1.585)); +#224008 = VECTOR('',#224009,1.); +#224009 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#224010 = PLANE('',#224011); +#224011 = AXIS2_PLACEMENT_3D('',#224012,#224013,#224014); +#224012 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224013 = DIRECTION('',(0.,0.,1.)); +#224014 = DIRECTION('',(1.,0.,-0.)); +#224015 = SHELL_BASED_SURFACE_MODEL('',(#224016)); +#224016 = OPEN_SHELL('',(#224017)); +#224017 = ADVANCED_FACE('',(#224018),#224062,.T.); +#224018 = FACE_BOUND('',#224019,.F.); +#224019 = EDGE_LOOP('',(#224020,#224031,#224039,#224048,#224056)); +#224020 = ORIENTED_EDGE('',*,*,#224021,.T.); +#224021 = EDGE_CURVE('',#224022,#224024,#224026,.T.); +#224022 = VERTEX_POINT('',#224023); +#224023 = CARTESIAN_POINT('',(137.834567,-60.487039,1.585)); +#224024 = VERTEX_POINT('',#224025); +#224025 = CARTESIAN_POINT('',(137.95,-60.51,1.585)); +#224026 = CIRCLE('',#224027,6.000007318647E-02); +#224027 = AXIS2_PLACEMENT_3D('',#224028,#224029,#224030); +#224028 = CARTESIAN_POINT('',(137.88999992681,-60.50999982331,1.585)); +#224029 = DIRECTION('',(0.,0.,-1.)); +#224030 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#224031 = ORIENTED_EDGE('',*,*,#224032,.T.); +#224032 = EDGE_CURVE('',#224024,#224033,#224035,.T.); +#224033 = VERTEX_POINT('',#224034); +#224034 = CARTESIAN_POINT('',(137.95,-61.29,1.585)); +#224035 = LINE('',#224036,#224037); +#224036 = CARTESIAN_POINT('',(137.95,-60.51,1.585)); +#224037 = VECTOR('',#224038,1.); +#224038 = DIRECTION('',(0.,-1.,0.)); +#224039 = ORIENTED_EDGE('',*,*,#224040,.T.); +#224040 = EDGE_CURVE('',#224033,#224041,#224043,.T.); +#224041 = VERTEX_POINT('',#224042); +#224042 = CARTESIAN_POINT('',(137.83,-61.29,1.585)); +#224043 = CIRCLE('',#224044,6.000000000041E-02); +#224044 = AXIS2_PLACEMENT_3D('',#224045,#224046,#224047); +#224045 = CARTESIAN_POINT('',(137.89,-61.29000022558,1.585)); +#224046 = DIRECTION('',(0.,0.,-1.)); +#224047 = DIRECTION('',(0.999999999993,3.759794490533E-06,0.)); +#224048 = ORIENTED_EDGE('',*,*,#224049,.T.); +#224049 = EDGE_CURVE('',#224041,#224050,#224052,.T.); +#224050 = VERTEX_POINT('',#224051); +#224051 = CARTESIAN_POINT('',(137.83,-60.51,1.585)); +#224052 = LINE('',#224053,#224054); +#224053 = CARTESIAN_POINT('',(137.83,-61.29,1.585)); +#224054 = VECTOR('',#224055,1.); +#224055 = DIRECTION('',(0.,1.,0.)); +#224056 = ORIENTED_EDGE('',*,*,#224057,.T.); +#224057 = EDGE_CURVE('',#224050,#224022,#224058,.T.); +#224058 = LINE('',#224059,#224060); +#224059 = CARTESIAN_POINT('',(137.83,-60.51,1.585)); +#224060 = VECTOR('',#224061,1.); +#224061 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#224062 = PLANE('',#224063); +#224063 = AXIS2_PLACEMENT_3D('',#224064,#224065,#224066); +#224064 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224065 = DIRECTION('',(0.,0.,1.)); +#224066 = DIRECTION('',(1.,0.,-0.)); +#224067 = SHELL_BASED_SURFACE_MODEL('',(#224068)); +#224068 = OPEN_SHELL('',(#224069)); +#224069 = ADVANCED_FACE('',(#224070),#224130,.T.); +#224070 = FACE_BOUND('',#224071,.F.); +#224071 = EDGE_LOOP('',(#224072,#224083,#224091,#224099,#224107,#224115, + #224124)); +#224072 = ORIENTED_EDGE('',*,*,#224073,.T.); +#224073 = EDGE_CURVE('',#224074,#224076,#224078,.T.); +#224074 = VERTEX_POINT('',#224075); +#224075 = CARTESIAN_POINT('',(97.65165,-61.3331,1.585)); +#224076 = VERTEX_POINT('',#224077); +#224077 = CARTESIAN_POINT('',(97.603126,-61.23781,1.585)); +#224078 = CIRCLE('',#224079,6.000027696173E-02); +#224079 = AXIS2_PLACEMENT_3D('',#224080,#224081,#224082); +#224080 = CARTESIAN_POINT('',(97.651650928468,-61.27309972304,1.585)); +#224081 = DIRECTION('',(0.,0.,-1.)); +#224082 = DIRECTION('',(-1.547440135436E-05,-0.99999999988,-0.)); +#224083 = ORIENTED_EDGE('',*,*,#224084,.T.); +#224084 = EDGE_CURVE('',#224076,#224085,#224087,.T.); +#224085 = VERTEX_POINT('',#224086); +#224086 = CARTESIAN_POINT('',(97.843126,-60.90781,1.585)); +#224087 = LINE('',#224088,#224089); +#224088 = CARTESIAN_POINT('',(97.603126,-61.23781,1.585)); +#224089 = VECTOR('',#224090,1.); +#224090 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#224091 = ORIENTED_EDGE('',*,*,#224092,.T.); +#224092 = EDGE_CURVE('',#224085,#224093,#224095,.T.); +#224093 = VERTEX_POINT('',#224094); +#224094 = CARTESIAN_POINT('',(97.882292,-60.883834,1.585)); +#224095 = LINE('',#224096,#224097); +#224096 = CARTESIAN_POINT('',(97.843126,-60.90781,1.585)); +#224097 = VECTOR('',#224098,1.); +#224098 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#224099 = ORIENTED_EDGE('',*,*,#224100,.T.); +#224100 = EDGE_CURVE('',#224093,#224101,#224103,.T.); +#224101 = VERTEX_POINT('',#224102); +#224102 = CARTESIAN_POINT('',(97.92694,-60.894576,1.585)); +#224103 = LINE('',#224104,#224105); +#224104 = CARTESIAN_POINT('',(97.882292,-60.883834,1.585)); +#224105 = VECTOR('',#224106,1.); +#224106 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#224107 = ORIENTED_EDGE('',*,*,#224108,.T.); +#224108 = EDGE_CURVE('',#224101,#224109,#224111,.T.); +#224109 = VERTEX_POINT('',#224110); +#224110 = CARTESIAN_POINT('',(98.180174,-61.23781,1.585)); +#224111 = LINE('',#224112,#224113); +#224112 = CARTESIAN_POINT('',(97.92694,-60.894576,1.585)); +#224113 = VECTOR('',#224114,1.); +#224114 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#224115 = ORIENTED_EDGE('',*,*,#224116,.T.); +#224116 = EDGE_CURVE('',#224109,#224117,#224119,.T.); +#224117 = VERTEX_POINT('',#224118); +#224118 = CARTESIAN_POINT('',(98.13165,-61.3331,1.585)); +#224119 = CIRCLE('',#224120,5.999941814203E-02); +#224120 = AXIS2_PLACEMENT_3D('',#224121,#224122,#224123); +#224121 = CARTESIAN_POINT('',(98.131650758052,-61.27310058186,1.585)); +#224122 = DIRECTION('',(0.,0.,-1.)); +#224123 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#224124 = ORIENTED_EDGE('',*,*,#224125,.T.); +#224125 = EDGE_CURVE('',#224117,#224074,#224126,.T.); +#224126 = LINE('',#224127,#224128); +#224127 = CARTESIAN_POINT('',(98.13165,-61.3331,1.585)); +#224128 = VECTOR('',#224129,1.); +#224129 = DIRECTION('',(-1.,0.,0.)); +#224130 = PLANE('',#224131); +#224131 = AXIS2_PLACEMENT_3D('',#224132,#224133,#224134); +#224132 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224133 = DIRECTION('',(0.,0.,1.)); +#224134 = DIRECTION('',(1.,0.,-0.)); +#224135 = SHELL_BASED_SURFACE_MODEL('',(#224136)); +#224136 = OPEN_SHELL('',(#224137)); +#224137 = ADVANCED_FACE('',(#224138),#224198,.T.); +#224138 = FACE_BOUND('',#224139,.F.); +#224139 = EDGE_LOOP('',(#224140,#224151,#224159,#224167,#224175,#224183, + #224192)); +#224140 = ORIENTED_EDGE('',*,*,#224141,.T.); +#224141 = EDGE_CURVE('',#224142,#224144,#224146,.T.); +#224142 = VERTEX_POINT('',#224143); +#224143 = CARTESIAN_POINT('',(137.11,-60.91,1.585)); +#224144 = VERTEX_POINT('',#224145); +#224145 = CARTESIAN_POINT('',(137.061476,-60.81471,1.585)); +#224146 = CIRCLE('',#224147,6.000027696175E-02); +#224147 = AXIS2_PLACEMENT_3D('',#224148,#224149,#224150); +#224148 = CARTESIAN_POINT('',(137.11000092846,-60.84999972304,1.585)); +#224149 = DIRECTION('',(0.,0.,-1.)); +#224150 = DIRECTION('',(-1.54744015912E-05,-0.99999999988,-0.)); +#224151 = ORIENTED_EDGE('',*,*,#224152,.T.); +#224152 = EDGE_CURVE('',#224144,#224153,#224155,.T.); +#224153 = VERTEX_POINT('',#224154); +#224154 = CARTESIAN_POINT('',(137.301476,-60.48471,1.585)); +#224155 = LINE('',#224156,#224157); +#224156 = CARTESIAN_POINT('',(137.061476,-60.81471,1.585)); +#224157 = VECTOR('',#224158,1.); +#224158 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#224159 = ORIENTED_EDGE('',*,*,#224160,.T.); +#224160 = EDGE_CURVE('',#224153,#224161,#224163,.T.); +#224161 = VERTEX_POINT('',#224162); +#224162 = CARTESIAN_POINT('',(137.340642,-60.460734,1.585)); +#224163 = LINE('',#224164,#224165); +#224164 = CARTESIAN_POINT('',(137.301476,-60.48471,1.585)); +#224165 = VECTOR('',#224166,1.); +#224166 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#224167 = ORIENTED_EDGE('',*,*,#224168,.T.); +#224168 = EDGE_CURVE('',#224161,#224169,#224171,.T.); +#224169 = VERTEX_POINT('',#224170); +#224170 = CARTESIAN_POINT('',(137.38529,-60.471476,1.585)); +#224171 = LINE('',#224172,#224173); +#224172 = CARTESIAN_POINT('',(137.340642,-60.460734,1.585)); +#224173 = VECTOR('',#224174,1.); +#224174 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#224175 = ORIENTED_EDGE('',*,*,#224176,.T.); +#224176 = EDGE_CURVE('',#224169,#224177,#224179,.T.); +#224177 = VERTEX_POINT('',#224178); +#224178 = CARTESIAN_POINT('',(137.638524,-60.81471,1.585)); +#224179 = LINE('',#224180,#224181); +#224180 = CARTESIAN_POINT('',(137.38529,-60.471476,1.585)); +#224181 = VECTOR('',#224182,1.); +#224182 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#224183 = ORIENTED_EDGE('',*,*,#224184,.T.); +#224184 = EDGE_CURVE('',#224177,#224185,#224187,.T.); +#224185 = VERTEX_POINT('',#224186); +#224186 = CARTESIAN_POINT('',(137.59,-60.91,1.585)); +#224187 = CIRCLE('',#224188,5.999941814201E-02); +#224188 = AXIS2_PLACEMENT_3D('',#224189,#224190,#224191); +#224189 = CARTESIAN_POINT('',(137.59000075805,-60.85000058186,1.585)); +#224190 = DIRECTION('',(0.,0.,-1.)); +#224191 = DIRECTION('',(0.80872854189,0.588182068354,0.)); +#224192 = ORIENTED_EDGE('',*,*,#224193,.T.); +#224193 = EDGE_CURVE('',#224185,#224142,#224194,.T.); +#224194 = LINE('',#224195,#224196); +#224195 = CARTESIAN_POINT('',(137.59,-60.91,1.585)); +#224196 = VECTOR('',#224197,1.); +#224197 = DIRECTION('',(-1.,0.,0.)); +#224198 = PLANE('',#224199); +#224199 = AXIS2_PLACEMENT_3D('',#224200,#224201,#224202); +#224200 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224201 = DIRECTION('',(0.,0.,1.)); +#224202 = DIRECTION('',(1.,0.,-0.)); +#224203 = SHELL_BASED_SURFACE_MODEL('',(#224204)); +#224204 = OPEN_SHELL('',(#224205)); +#224205 = ADVANCED_FACE('',(#224206),#224242,.T.); +#224206 = FACE_BOUND('',#224207,.F.); +#224207 = EDGE_LOOP('',(#224208,#224219,#224227,#224236)); +#224208 = ORIENTED_EDGE('',*,*,#224209,.T.); +#224209 = EDGE_CURVE('',#224210,#224212,#224214,.T.); +#224210 = VERTEX_POINT('',#224211); +#224211 = CARTESIAN_POINT('',(84.954392,-60.8606,1.585)); +#224212 = VERTEX_POINT('',#224213); +#224213 = CARTESIAN_POINT('',(84.954392,-60.7406,1.585)); +#224214 = CIRCLE('',#224215,6.000000000042E-02); +#224215 = AXIS2_PLACEMENT_3D('',#224216,#224217,#224218); +#224216 = CARTESIAN_POINT('',(84.954391774412,-60.8006,1.585)); +#224217 = DIRECTION('',(0.,0.,-1.)); +#224218 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#224219 = ORIENTED_EDGE('',*,*,#224220,.T.); +#224220 = EDGE_CURVE('',#224212,#224221,#224223,.T.); +#224221 = VERTEX_POINT('',#224222); +#224222 = CARTESIAN_POINT('',(85.428908,-60.7406,1.585)); +#224223 = LINE('',#224224,#224225); +#224224 = CARTESIAN_POINT('',(84.954392,-60.7406,1.585)); +#224225 = VECTOR('',#224226,1.); +#224226 = DIRECTION('',(1.,0.,0.)); +#224227 = ORIENTED_EDGE('',*,*,#224228,.T.); +#224228 = EDGE_CURVE('',#224221,#224229,#224231,.T.); +#224229 = VERTEX_POINT('',#224230); +#224230 = CARTESIAN_POINT('',(85.428908,-60.8606,1.585)); +#224231 = CIRCLE('',#224232,6.000000000042E-02); +#224232 = AXIS2_PLACEMENT_3D('',#224233,#224234,#224235); +#224233 = CARTESIAN_POINT('',(85.428908225588,-60.8006,1.585)); +#224234 = DIRECTION('',(0.,0.,-1.)); +#224235 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#224236 = ORIENTED_EDGE('',*,*,#224237,.T.); +#224237 = EDGE_CURVE('',#224229,#224210,#224238,.T.); +#224238 = LINE('',#224239,#224240); +#224239 = CARTESIAN_POINT('',(85.428908,-60.8606,1.585)); +#224240 = VECTOR('',#224241,1.); +#224241 = DIRECTION('',(-1.,0.,0.)); +#224242 = PLANE('',#224243); +#224243 = AXIS2_PLACEMENT_3D('',#224244,#224245,#224246); +#224244 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224245 = DIRECTION('',(0.,0.,1.)); +#224246 = DIRECTION('',(1.,0.,-0.)); +#224247 = SHELL_BASED_SURFACE_MODEL('',(#224248)); +#224248 = OPEN_SHELL('',(#224249)); +#224249 = ADVANCED_FACE('',(#224250),#224336,.T.); +#224250 = FACE_BOUND('',#224251,.F.); +#224251 = EDGE_LOOP('',(#224252,#224263,#224271,#224280,#224288,#224297, + #224305,#224313,#224321,#224330)); +#224252 = ORIENTED_EDGE('',*,*,#224253,.T.); +#224253 = EDGE_CURVE('',#224254,#224256,#224258,.T.); +#224254 = VERTEX_POINT('',#224255); +#224255 = CARTESIAN_POINT('',(98.37165,-59.7631,1.585)); +#224256 = VERTEX_POINT('',#224257); +#224257 = CARTESIAN_POINT('',(98.43165,-59.7031,1.585)); +#224258 = CIRCLE('',#224259,5.999932016258E-02); +#224259 = AXIS2_PLACEMENT_3D('',#224260,#224261,#224262); +#224260 = CARTESIAN_POINT('',(98.431649320159,-59.76309932015,1.585)); +#224261 = DIRECTION('',(0.,0.,-1.)); +#224262 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#224263 = ORIENTED_EDGE('',*,*,#224264,.T.); +#224264 = EDGE_CURVE('',#224256,#224265,#224267,.T.); +#224265 = VERTEX_POINT('',#224266); +#224266 = CARTESIAN_POINT('',(99.95165,-59.7031,1.585)); +#224267 = LINE('',#224268,#224269); +#224268 = CARTESIAN_POINT('',(98.43165,-59.7031,1.585)); +#224269 = VECTOR('',#224270,1.); +#224270 = DIRECTION('',(1.,0.,0.)); +#224271 = ORIENTED_EDGE('',*,*,#224272,.T.); +#224272 = EDGE_CURVE('',#224265,#224273,#224275,.T.); +#224273 = VERTEX_POINT('',#224274); +#224274 = CARTESIAN_POINT('',(100.01165,-59.7631,1.585)); +#224275 = CIRCLE('',#224276,5.999932016261E-02); +#224276 = AXIS2_PLACEMENT_3D('',#224277,#224278,#224279); +#224277 = CARTESIAN_POINT('',(99.951650679841,-59.76309932015,1.585)); +#224278 = DIRECTION('',(0.,0.,-1.)); +#224279 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#224280 = ORIENTED_EDGE('',*,*,#224281,.T.); +#224281 = EDGE_CURVE('',#224273,#224282,#224284,.T.); +#224282 = VERTEX_POINT('',#224283); +#224283 = CARTESIAN_POINT('',(100.01165,-60.7631,1.585)); +#224284 = LINE('',#224285,#224286); +#224285 = CARTESIAN_POINT('',(100.01165,-59.7631,1.585)); +#224286 = VECTOR('',#224287,1.); +#224287 = DIRECTION('',(0.,-1.,0.)); +#224288 = ORIENTED_EDGE('',*,*,#224289,.T.); +#224289 = EDGE_CURVE('',#224282,#224290,#224292,.T.); +#224290 = VERTEX_POINT('',#224291); +#224291 = CARTESIAN_POINT('',(99.89165,-60.7631,1.585)); +#224292 = CIRCLE('',#224293,6.000000000042E-02); +#224293 = AXIS2_PLACEMENT_3D('',#224294,#224295,#224296); +#224294 = CARTESIAN_POINT('',(99.95165,-60.76310022558,1.585)); +#224295 = DIRECTION('',(0.,0.,-1.)); +#224296 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#224297 = ORIENTED_EDGE('',*,*,#224298,.T.); +#224298 = EDGE_CURVE('',#224290,#224299,#224301,.T.); +#224299 = VERTEX_POINT('',#224300); +#224300 = CARTESIAN_POINT('',(99.89165,-59.8231,1.585)); +#224301 = LINE('',#224302,#224303); +#224302 = CARTESIAN_POINT('',(99.89165,-60.7631,1.585)); +#224303 = VECTOR('',#224304,1.); +#224304 = DIRECTION('',(0.,1.,0.)); +#224305 = ORIENTED_EDGE('',*,*,#224306,.T.); +#224306 = EDGE_CURVE('',#224299,#224307,#224309,.T.); +#224307 = VERTEX_POINT('',#224308); +#224308 = CARTESIAN_POINT('',(98.489661,-59.8231,1.585)); +#224309 = LINE('',#224310,#224311); +#224310 = CARTESIAN_POINT('',(99.89165,-59.8231,1.585)); +#224311 = VECTOR('',#224312,1.); +#224312 = DIRECTION('',(-1.,0.,0.)); +#224313 = ORIENTED_EDGE('',*,*,#224314,.T.); +#224314 = EDGE_CURVE('',#224307,#224315,#224317,.T.); +#224315 = VERTEX_POINT('',#224316); +#224316 = CARTESIAN_POINT('',(98.487083,-59.836061,1.585)); +#224317 = LINE('',#224318,#224319); +#224318 = CARTESIAN_POINT('',(98.489661,-59.8231,1.585)); +#224319 = VECTOR('',#224320,1.); +#224320 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#224321 = ORIENTED_EDGE('',*,*,#224322,.T.); +#224322 = EDGE_CURVE('',#224315,#224323,#224325,.T.); +#224323 = VERTEX_POINT('',#224324); +#224324 = CARTESIAN_POINT('',(98.37165,-59.8131,1.585)); +#224325 = CIRCLE('',#224326,6.000007318647E-02); +#224326 = AXIS2_PLACEMENT_3D('',#224327,#224328,#224329); +#224327 = CARTESIAN_POINT('',(98.431650073186,-59.81310017668,1.585)); +#224328 = DIRECTION('',(-0.,0.,-1.)); +#224329 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#224330 = ORIENTED_EDGE('',*,*,#224331,.T.); +#224331 = EDGE_CURVE('',#224323,#224254,#224332,.T.); +#224332 = LINE('',#224333,#224334); +#224333 = CARTESIAN_POINT('',(98.37165,-59.8131,1.585)); +#224334 = VECTOR('',#224335,1.); +#224335 = DIRECTION('',(0.,1.,0.)); +#224336 = PLANE('',#224337); +#224337 = AXIS2_PLACEMENT_3D('',#224338,#224339,#224340); +#224338 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224339 = DIRECTION('',(0.,0.,1.)); +#224340 = DIRECTION('',(1.,0.,-0.)); +#224341 = SHELL_BASED_SURFACE_MODEL('',(#224342)); +#224342 = OPEN_SHELL('',(#224343)); +#224343 = ADVANCED_FACE('',(#224344,#224446),#224514,.T.); +#224344 = FACE_BOUND('',#224345,.F.); +#224345 = EDGE_LOOP('',(#224346,#224357,#224365,#224373,#224382,#224390, + #224399,#224407,#224415,#224424,#224432,#224440)); +#224346 = ORIENTED_EDGE('',*,*,#224347,.T.); +#224347 = EDGE_CURVE('',#224348,#224350,#224352,.T.); +#224348 = VERTEX_POINT('',#224349); +#224349 = CARTESIAN_POINT('',(85.74522,-59.618892,1.585)); +#224350 = VERTEX_POINT('',#224351); +#224351 = CARTESIAN_POINT('',(85.832084,-59.62242,1.585)); +#224352 = CIRCLE('',#224353,7.226649079678E-02); +#224353 = AXIS2_PLACEMENT_3D('',#224354,#224355,#224356); +#224354 = CARTESIAN_POINT('',(85.786309129967,-59.67834054153,1.585)); +#224355 = DIRECTION('',(0.,0.,-1.)); +#224356 = DIRECTION('',(-0.56857790539,0.822629421734,0.)); +#224357 = ORIENTED_EDGE('',*,*,#224358,.T.); +#224358 = EDGE_CURVE('',#224350,#224359,#224361,.T.); +#224359 = VERTEX_POINT('',#224360); +#224360 = CARTESIAN_POINT('',(85.867494,-59.607693,1.585)); +#224361 = LINE('',#224362,#224363); +#224362 = CARTESIAN_POINT('',(85.832084,-59.62242,1.585)); +#224363 = VECTOR('',#224364,1.); +#224364 = DIRECTION('',(0.923328221737,0.384011711989,0.)); +#224365 = ORIENTED_EDGE('',*,*,#224366,.T.); +#224366 = EDGE_CURVE('',#224359,#224367,#224369,.T.); +#224367 = VERTEX_POINT('',#224368); +#224368 = CARTESIAN_POINT('',(86.087234,-59.607693,1.585)); +#224369 = LINE('',#224370,#224371); +#224370 = CARTESIAN_POINT('',(85.867494,-59.607693,1.585)); +#224371 = VECTOR('',#224372,1.); +#224372 = DIRECTION('',(1.,0.,0.)); +#224373 = ORIENTED_EDGE('',*,*,#224374,.T.); +#224374 = EDGE_CURVE('',#224367,#224375,#224377,.T.); +#224375 = VERTEX_POINT('',#224376); +#224376 = CARTESIAN_POINT('',(86.336637,-59.857096,1.585)); +#224377 = CIRCLE('',#224378,0.347870264855); +#224378 = AXIS2_PLACEMENT_3D('',#224379,#224380,#224381); +#224379 = CARTESIAN_POINT('',(85.999906265028,-59.94442373497,1.585)); +#224380 = DIRECTION('',(0.,0.,-1.)); +#224381 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#224382 = ORIENTED_EDGE('',*,*,#224383,.T.); +#224383 = EDGE_CURVE('',#224375,#224384,#224386,.T.); +#224384 = VERTEX_POINT('',#224385); +#224385 = CARTESIAN_POINT('',(86.335415,-60.177252,1.585)); +#224386 = LINE('',#224387,#224388); +#224387 = CARTESIAN_POINT('',(86.336637,-59.857096,1.585)); +#224388 = VECTOR('',#224389,1.); +#224389 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#224390 = ORIENTED_EDGE('',*,*,#224391,.T.); +#224391 = EDGE_CURVE('',#224384,#224392,#224394,.T.); +#224392 = VERTEX_POINT('',#224393); +#224393 = CARTESIAN_POINT('',(86.087234,-60.421478,1.585)); +#224394 = CIRCLE('',#224395,0.348635327447); +#224395 = AXIS2_PLACEMENT_3D('',#224396,#224397,#224398); +#224396 = CARTESIAN_POINT('',(85.999462481291,-60.08407208415,1.585)); +#224397 = DIRECTION('',(0.,0.,-1.)); +#224398 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#224399 = ORIENTED_EDGE('',*,*,#224400,.T.); +#224400 = EDGE_CURVE('',#224392,#224401,#224403,.T.); +#224401 = VERTEX_POINT('',#224402); +#224402 = CARTESIAN_POINT('',(85.861888,-60.420092,1.585)); +#224403 = LINE('',#224404,#224405); +#224404 = CARTESIAN_POINT('',(86.087234,-60.421478,1.585)); +#224405 = VECTOR('',#224406,1.); +#224406 = DIRECTION('',(-0.999981085954,6.150425501834E-03,0.)); +#224407 = ORIENTED_EDGE('',*,*,#224408,.T.); +#224408 = EDGE_CURVE('',#224401,#224409,#224411,.T.); +#224409 = VERTEX_POINT('',#224410); +#224410 = CARTESIAN_POINT('',(85.860447,-60.695884,1.585)); +#224411 = LINE('',#224412,#224413); +#224412 = CARTESIAN_POINT('',(85.861888,-60.420092,1.585)); +#224413 = VECTOR('',#224414,1.); +#224414 = DIRECTION('',(-5.22488081838E-03,-0.999986350217,0.)); +#224415 = ORIENTED_EDGE('',*,*,#224416,.T.); +#224416 = EDGE_CURVE('',#224409,#224417,#224419,.T.); +#224417 = VERTEX_POINT('',#224418); +#224418 = CARTESIAN_POINT('',(85.711888,-60.681252,1.585)); +#224419 = CIRCLE('',#224420,7.500006711464E-02); +#224420 = AXIS2_PLACEMENT_3D('',#224421,#224422,#224423); +#224421 = CARTESIAN_POINT('',(85.786888067115,-60.68125206711,1.585)); +#224422 = DIRECTION('',(-0.,0.,-1.)); +#224423 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#224424 = ORIENTED_EDGE('',*,*,#224425,.T.); +#224425 = EDGE_CURVE('',#224417,#224426,#224428,.T.); +#224426 = VERTEX_POINT('',#224427); +#224427 = CARTESIAN_POINT('',(85.713329,-59.66662,1.585)); +#224428 = LINE('',#224429,#224430); +#224429 = CARTESIAN_POINT('',(85.711888,-60.681252,1.585)); +#224430 = VECTOR('',#224431,1.); +#224431 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#224432 = ORIENTED_EDGE('',*,*,#224433,.T.); +#224433 = EDGE_CURVE('',#224426,#224434,#224436,.T.); +#224434 = VERTEX_POINT('',#224435); +#224435 = CARTESIAN_POINT('',(85.724528,-59.639584,1.585)); +#224436 = LINE('',#224437,#224438); +#224437 = CARTESIAN_POINT('',(85.713329,-59.66662,1.585)); +#224438 = VECTOR('',#224439,1.); +#224439 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#224440 = ORIENTED_EDGE('',*,*,#224441,.T.); +#224441 = EDGE_CURVE('',#224434,#224348,#224442,.T.); +#224442 = LINE('',#224443,#224444); +#224443 = CARTESIAN_POINT('',(85.724528,-59.639584,1.585)); +#224444 = VECTOR('',#224445,1.); +#224445 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#224446 = FACE_BOUND('',#224447,.F.); +#224447 = EDGE_LOOP('',(#224448,#224459,#224467,#224475,#224483,#224491, + #224499,#224508)); +#224448 = ORIENTED_EDGE('',*,*,#224449,.T.); +#224449 = EDGE_CURVE('',#224450,#224452,#224454,.T.); +#224450 = VERTEX_POINT('',#224451); +#224451 = CARTESIAN_POINT('',(86.188078,-59.889433,1.585)); +#224452 = VERTEX_POINT('',#224453); +#224453 = CARTESIAN_POINT('',(86.054897,-59.756252,1.585)); +#224454 = CIRCLE('',#224455,0.18686440374); +#224455 = AXIS2_PLACEMENT_3D('',#224456,#224457,#224458); +#224456 = CARTESIAN_POINT('',(86.007361,-59.936969,1.585)); +#224457 = DIRECTION('',(0.,0.,1.)); +#224458 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#224459 = ORIENTED_EDGE('',*,*,#224460,.T.); +#224460 = EDGE_CURVE('',#224452,#224461,#224463,.T.); +#224461 = VERTEX_POINT('',#224462); +#224462 = CARTESIAN_POINT('',(85.899831,-59.756252,1.585)); +#224463 = LINE('',#224464,#224465); +#224464 = CARTESIAN_POINT('',(86.054897,-59.756252,1.585)); +#224465 = VECTOR('',#224466,1.); +#224466 = DIRECTION('',(-1.,0.,0.)); +#224467 = ORIENTED_EDGE('',*,*,#224468,.T.); +#224468 = EDGE_CURVE('',#224461,#224469,#224471,.T.); +#224469 = VERTEX_POINT('',#224470); +#224470 = CARTESIAN_POINT('',(85.861888,-59.775223,1.585)); +#224471 = LINE('',#224472,#224473); +#224472 = CARTESIAN_POINT('',(85.899831,-59.756252,1.585)); +#224473 = VECTOR('',#224474,1.); +#224474 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#224475 = ORIENTED_EDGE('',*,*,#224476,.T.); +#224476 = EDGE_CURVE('',#224469,#224477,#224479,.T.); +#224477 = VERTEX_POINT('',#224478); +#224478 = CARTESIAN_POINT('',(85.861888,-60.253947,1.585)); +#224479 = LINE('',#224480,#224481); +#224480 = CARTESIAN_POINT('',(85.861888,-59.775223,1.585)); +#224481 = VECTOR('',#224482,1.); +#224482 = DIRECTION('',(0.,-1.,0.)); +#224483 = ORIENTED_EDGE('',*,*,#224484,.T.); +#224484 = EDGE_CURVE('',#224477,#224485,#224487,.T.); +#224485 = VERTEX_POINT('',#224486); +#224486 = CARTESIAN_POINT('',(85.899831,-60.272919,1.585)); +#224487 = LINE('',#224488,#224489); +#224488 = CARTESIAN_POINT('',(85.861888,-60.253947,1.585)); +#224489 = VECTOR('',#224490,1.); +#224490 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#224491 = ORIENTED_EDGE('',*,*,#224492,.T.); +#224492 = EDGE_CURVE('',#224485,#224493,#224495,.T.); +#224493 = VERTEX_POINT('',#224494); +#224494 = CARTESIAN_POINT('',(86.054897,-60.272919,1.585)); +#224495 = LINE('',#224496,#224497); +#224496 = CARTESIAN_POINT('',(85.899831,-60.272919,1.585)); +#224497 = VECTOR('',#224498,1.); +#224498 = DIRECTION('',(1.,0.,0.)); +#224499 = ORIENTED_EDGE('',*,*,#224500,.T.); +#224500 = EDGE_CURVE('',#224493,#224501,#224503,.T.); +#224501 = VERTEX_POINT('',#224502); +#224502 = CARTESIAN_POINT('',(86.188078,-60.139737,1.585)); +#224503 = CIRCLE('',#224504,0.186867760544); +#224504 = AXIS2_PLACEMENT_3D('',#224505,#224506,#224507); +#224505 = CARTESIAN_POINT('',(86.007357969282,-60.09219932622,1.585)); +#224506 = DIRECTION('',(0.,0.,1.)); +#224507 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#224508 = ORIENTED_EDGE('',*,*,#224509,.T.); +#224509 = EDGE_CURVE('',#224501,#224450,#224510,.T.); +#224510 = LINE('',#224511,#224512); +#224511 = CARTESIAN_POINT('',(86.188078,-60.139737,1.585)); +#224512 = VECTOR('',#224513,1.); +#224513 = DIRECTION('',(0.,1.,0.)); +#224514 = PLANE('',#224515); +#224515 = AXIS2_PLACEMENT_3D('',#224516,#224517,#224518); +#224516 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224517 = DIRECTION('',(0.,0.,1.)); +#224518 = DIRECTION('',(1.,0.,-0.)); +#224519 = SHELL_BASED_SURFACE_MODEL('',(#224520)); +#224520 = OPEN_SHELL('',(#224521)); +#224521 = ADVANCED_FACE('',(#224522),#224566,.T.); +#224522 = FACE_BOUND('',#224523,.F.); +#224523 = EDGE_LOOP('',(#224524,#224535,#224543,#224552,#224560)); +#224524 = ORIENTED_EDGE('',*,*,#224525,.T.); +#224525 = EDGE_CURVE('',#224526,#224528,#224530,.T.); +#224526 = VERTEX_POINT('',#224527); +#224527 = CARTESIAN_POINT('',(144.634567,-59.787039,1.585)); +#224528 = VERTEX_POINT('',#224529); +#224529 = CARTESIAN_POINT('',(144.75,-59.81,1.585)); +#224530 = CIRCLE('',#224531,6.000007318647E-02); +#224531 = AXIS2_PLACEMENT_3D('',#224532,#224533,#224534); +#224532 = CARTESIAN_POINT('',(144.68999992681,-59.80999982331,1.585)); +#224533 = DIRECTION('',(0.,0.,-1.)); +#224534 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#224535 = ORIENTED_EDGE('',*,*,#224536,.T.); +#224536 = EDGE_CURVE('',#224528,#224537,#224539,.T.); +#224537 = VERTEX_POINT('',#224538); +#224538 = CARTESIAN_POINT('',(144.75,-60.59,1.585)); +#224539 = LINE('',#224540,#224541); +#224540 = CARTESIAN_POINT('',(144.75,-59.81,1.585)); +#224541 = VECTOR('',#224542,1.); +#224542 = DIRECTION('',(0.,-1.,0.)); +#224543 = ORIENTED_EDGE('',*,*,#224544,.T.); +#224544 = EDGE_CURVE('',#224537,#224545,#224547,.T.); +#224545 = VERTEX_POINT('',#224546); +#224546 = CARTESIAN_POINT('',(144.63,-60.59,1.585)); +#224547 = CIRCLE('',#224548,6.000000000043E-02); +#224548 = AXIS2_PLACEMENT_3D('',#224549,#224550,#224551); +#224549 = CARTESIAN_POINT('',(144.69,-60.59000022558,1.585)); +#224550 = DIRECTION('',(0.,0.,-1.)); +#224551 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#224552 = ORIENTED_EDGE('',*,*,#224553,.T.); +#224553 = EDGE_CURVE('',#224545,#224554,#224556,.T.); +#224554 = VERTEX_POINT('',#224555); +#224555 = CARTESIAN_POINT('',(144.63,-59.81,1.585)); +#224556 = LINE('',#224557,#224558); +#224557 = CARTESIAN_POINT('',(144.63,-60.59,1.585)); +#224558 = VECTOR('',#224559,1.); +#224559 = DIRECTION('',(0.,1.,0.)); +#224560 = ORIENTED_EDGE('',*,*,#224561,.T.); +#224561 = EDGE_CURVE('',#224554,#224526,#224562,.T.); +#224562 = LINE('',#224563,#224564); +#224563 = CARTESIAN_POINT('',(144.63,-59.81,1.585)); +#224564 = VECTOR('',#224565,1.); +#224565 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#224566 = PLANE('',#224567); +#224567 = AXIS2_PLACEMENT_3D('',#224568,#224569,#224570); +#224568 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224569 = DIRECTION('',(0.,0.,1.)); +#224570 = DIRECTION('',(1.,0.,-0.)); +#224571 = SHELL_BASED_SURFACE_MODEL('',(#224572)); +#224572 = OPEN_SHELL('',(#224573)); +#224573 = ADVANCED_FACE('',(#224574,#224685),#224737,.T.); +#224574 = FACE_BOUND('',#224575,.F.); +#224575 = EDGE_LOOP('',(#224576,#224587,#224595,#224604,#224612,#224621, + #224629,#224637,#224646,#224654,#224662,#224670,#224679)); +#224576 = ORIENTED_EDGE('',*,*,#224577,.T.); +#224577 = EDGE_CURVE('',#224578,#224580,#224582,.T.); +#224578 = VERTEX_POINT('',#224579); +#224579 = CARTESIAN_POINT('',(84.094281,-59.333287,1.585)); +#224580 = VERTEX_POINT('',#224581); +#224581 = CARTESIAN_POINT('',(84.16784,-59.272919,1.585)); +#224582 = CIRCLE('',#224583,7.500074938988E-02); +#224583 = AXIS2_PLACEMENT_3D('',#224584,#224585,#224586); +#224584 = CARTESIAN_POINT('',(84.16784046611,-59.34791974938,1.585)); +#224585 = DIRECTION('',(0.,0.,-1.)); +#224586 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#224587 = ORIENTED_EDGE('',*,*,#224588,.T.); +#224588 = EDGE_CURVE('',#224580,#224589,#224591,.T.); +#224589 = VERTEX_POINT('',#224590); +#224590 = CARTESIAN_POINT('',(84.563424,-59.27436,1.585)); +#224591 = LINE('',#224592,#224593); +#224592 = CARTESIAN_POINT('',(84.16784,-59.272919,1.585)); +#224593 = VECTOR('',#224594,1.); +#224594 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#224595 = ORIENTED_EDGE('',*,*,#224596,.T.); +#224596 = EDGE_CURVE('',#224589,#224597,#224599,.T.); +#224597 = VERTEX_POINT('',#224598); +#224598 = CARTESIAN_POINT('',(84.812827,-59.523763,1.585)); +#224599 = CIRCLE('',#224600,0.347870264855); +#224600 = AXIS2_PLACEMENT_3D('',#224601,#224602,#224603); +#224601 = CARTESIAN_POINT('',(84.476096265028,-59.61109073497,1.585)); +#224602 = DIRECTION('',(0.,0.,-1.)); +#224603 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#224604 = ORIENTED_EDGE('',*,*,#224605,.T.); +#224605 = EDGE_CURVE('',#224597,#224606,#224608,.T.); +#224606 = VERTEX_POINT('',#224607); +#224607 = CARTESIAN_POINT('',(84.811605,-59.701062,1.585)); +#224608 = LINE('',#224609,#224610); +#224609 = CARTESIAN_POINT('',(84.812827,-59.523763,1.585)); +#224610 = VECTOR('',#224611,1.); +#224611 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#224612 = ORIENTED_EDGE('',*,*,#224613,.T.); +#224613 = EDGE_CURVE('',#224606,#224614,#224616,.T.); +#224614 = VERTEX_POINT('',#224615); +#224615 = CARTESIAN_POINT('',(84.563424,-59.945287,1.585)); +#224616 = CIRCLE('',#224617,0.348632345849); +#224617 = AXIS2_PLACEMENT_3D('',#224618,#224619,#224620); +#224618 = CARTESIAN_POINT('',(84.475655194037,-59.6078834593,1.585)); +#224619 = DIRECTION('',(0.,0.,-1.)); +#224620 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#224621 = ORIENTED_EDGE('',*,*,#224622,.T.); +#224622 = EDGE_CURVE('',#224614,#224623,#224625,.T.); +#224623 = VERTEX_POINT('',#224624); +#224624 = CARTESIAN_POINT('',(84.549907,-59.946618,1.585)); +#224625 = LINE('',#224626,#224627); +#224626 = CARTESIAN_POINT('',(84.563424,-59.945287,1.585)); +#224627 = VECTOR('',#224628,1.); +#224628 = DIRECTION('',(-0.995186940545,-9.799465989986E-02,0.)); +#224629 = ORIENTED_EDGE('',*,*,#224630,.T.); +#224630 = EDGE_CURVE('',#224623,#224631,#224633,.T.); +#224631 = VERTEX_POINT('',#224632); +#224632 = CARTESIAN_POINT('',(84.807921,-60.317723,1.585)); +#224633 = LINE('',#224634,#224635); +#224634 = CARTESIAN_POINT('',(84.549907,-59.946618,1.585)); +#224635 = VECTOR('',#224636,1.); +#224636 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#224637 = ORIENTED_EDGE('',*,*,#224638,.T.); +#224638 = EDGE_CURVE('',#224631,#224639,#224641,.T.); +#224639 = VERTEX_POINT('',#224640); +#224640 = CARTESIAN_POINT('',(84.677826,-60.390929,1.585)); +#224641 = CIRCLE('',#224642,7.500005951702E-02); +#224642 = AXIS2_PLACEMENT_3D('',#224643,#224644,#224645); +#224643 = CARTESIAN_POINT('',(84.739268062942,-60.34791874739,1.585)); +#224644 = DIRECTION('',(0.,0.,-1.)); +#224645 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#224646 = ORIENTED_EDGE('',*,*,#224647,.T.); +#224647 = EDGE_CURVE('',#224639,#224648,#224650,.T.); +#224648 = VERTEX_POINT('',#224649); +#224649 = CARTESIAN_POINT('',(84.366886,-59.946728,1.585)); +#224650 = LINE('',#224651,#224652); +#224651 = CARTESIAN_POINT('',(84.677826,-60.390929,1.585)); +#224652 = VECTOR('',#224653,1.); +#224653 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#224654 = ORIENTED_EDGE('',*,*,#224655,.T.); +#224655 = EDGE_CURVE('',#224648,#224656,#224658,.T.); +#224656 = VERTEX_POINT('',#224657); +#224657 = CARTESIAN_POINT('',(84.24284,-59.946728,1.585)); +#224658 = LINE('',#224659,#224660); +#224659 = CARTESIAN_POINT('',(84.366886,-59.946728,1.585)); +#224660 = VECTOR('',#224661,1.); +#224661 = DIRECTION('',(-1.,0.,0.)); +#224662 = ORIENTED_EDGE('',*,*,#224663,.T.); +#224663 = EDGE_CURVE('',#224656,#224664,#224666,.T.); +#224664 = VERTEX_POINT('',#224665); +#224665 = CARTESIAN_POINT('',(84.241399,-60.362551,1.585)); +#224666 = LINE('',#224667,#224668); +#224667 = CARTESIAN_POINT('',(84.24284,-59.946728,1.585)); +#224668 = VECTOR('',#224669,1.); +#224669 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#224670 = ORIENTED_EDGE('',*,*,#224671,.T.); +#224671 = EDGE_CURVE('',#224664,#224672,#224674,.T.); +#224672 = VERTEX_POINT('',#224673); +#224673 = CARTESIAN_POINT('',(84.09284,-60.347919,1.585)); +#224674 = CIRCLE('',#224675,7.500006711465E-02); +#224675 = AXIS2_PLACEMENT_3D('',#224676,#224677,#224678); +#224676 = CARTESIAN_POINT('',(84.167840067115,-60.34791906711,1.585)); +#224677 = DIRECTION('',(-0.,0.,-1.)); +#224678 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#224679 = ORIENTED_EDGE('',*,*,#224680,.T.); +#224680 = EDGE_CURVE('',#224672,#224578,#224681,.T.); +#224681 = LINE('',#224682,#224683); +#224682 = CARTESIAN_POINT('',(84.09284,-60.347919,1.585)); +#224683 = VECTOR('',#224684,1.); +#224684 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#224685 = FACE_BOUND('',#224686,.F.); +#224686 = EDGE_LOOP('',(#224687,#224698,#224706,#224714,#224722,#224731) + ); +#224687 = ORIENTED_EDGE('',*,*,#224688,.T.); +#224688 = EDGE_CURVE('',#224689,#224691,#224693,.T.); +#224689 = VERTEX_POINT('',#224690); +#224690 = CARTESIAN_POINT('',(84.664268,-59.5561,1.585)); +#224691 = VERTEX_POINT('',#224692); +#224692 = CARTESIAN_POINT('',(84.531087,-59.422919,1.585)); +#224693 = CIRCLE('',#224694,0.18686440374); +#224694 = AXIS2_PLACEMENT_3D('',#224695,#224696,#224697); +#224695 = CARTESIAN_POINT('',(84.483551,-59.603636,1.585)); +#224696 = DIRECTION('',(0.,0.,1.)); +#224697 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#224698 = ORIENTED_EDGE('',*,*,#224699,.T.); +#224699 = EDGE_CURVE('',#224691,#224700,#224702,.T.); +#224700 = VERTEX_POINT('',#224701); +#224701 = CARTESIAN_POINT('',(84.24284,-59.422919,1.585)); +#224702 = LINE('',#224703,#224704); +#224703 = CARTESIAN_POINT('',(84.531087,-59.422919,1.585)); +#224704 = VECTOR('',#224705,1.); +#224705 = DIRECTION('',(-1.,0.,0.)); +#224706 = ORIENTED_EDGE('',*,*,#224707,.T.); +#224707 = EDGE_CURVE('',#224700,#224708,#224710,.T.); +#224708 = VERTEX_POINT('',#224709); +#224709 = CARTESIAN_POINT('',(84.24284,-59.796728,1.585)); +#224710 = LINE('',#224711,#224712); +#224711 = CARTESIAN_POINT('',(84.24284,-59.422919,1.585)); +#224712 = VECTOR('',#224713,1.); +#224713 = DIRECTION('',(0.,-1.,0.)); +#224714 = ORIENTED_EDGE('',*,*,#224715,.T.); +#224715 = EDGE_CURVE('',#224708,#224716,#224718,.T.); +#224716 = VERTEX_POINT('',#224717); +#224717 = CARTESIAN_POINT('',(84.531087,-59.796728,1.585)); +#224718 = LINE('',#224719,#224720); +#224719 = CARTESIAN_POINT('',(84.24284,-59.796728,1.585)); +#224720 = VECTOR('',#224721,1.); +#224721 = DIRECTION('',(1.,0.,0.)); +#224722 = ORIENTED_EDGE('',*,*,#224723,.T.); +#224723 = EDGE_CURVE('',#224716,#224724,#224726,.T.); +#224724 = VERTEX_POINT('',#224725); +#224725 = CARTESIAN_POINT('',(84.664268,-59.663547,1.585)); +#224726 = CIRCLE('',#224727,0.18686440374); +#224727 = AXIS2_PLACEMENT_3D('',#224728,#224729,#224730); +#224728 = CARTESIAN_POINT('',(84.483551,-59.616011,1.585)); +#224729 = DIRECTION('',(0.,0.,1.)); +#224730 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#224731 = ORIENTED_EDGE('',*,*,#224732,.T.); +#224732 = EDGE_CURVE('',#224724,#224689,#224733,.T.); +#224733 = LINE('',#224734,#224735); +#224734 = CARTESIAN_POINT('',(84.664268,-59.663547,1.585)); +#224735 = VECTOR('',#224736,1.); +#224736 = DIRECTION('',(0.,1.,0.)); +#224737 = PLANE('',#224738); +#224738 = AXIS2_PLACEMENT_3D('',#224739,#224740,#224741); +#224739 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224740 = DIRECTION('',(0.,0.,1.)); +#224741 = DIRECTION('',(1.,0.,-0.)); +#224742 = SHELL_BASED_SURFACE_MODEL('',(#224743)); +#224743 = OPEN_SHELL('',(#224744)); +#224744 = ADVANCED_FACE('',(#224745),#224847,.T.); +#224745 = FACE_BOUND('',#224746,.F.); +#224746 = EDGE_LOOP('',(#224747,#224758,#224766,#224774,#224782,#224791, + #224799,#224808,#224816,#224825,#224833,#224841)); +#224747 = ORIENTED_EDGE('',*,*,#224748,.T.); +#224748 = EDGE_CURVE('',#224749,#224751,#224753,.T.); +#224749 = VERTEX_POINT('',#224750); +#224750 = CARTESIAN_POINT('',(85.126172,-59.618892,1.585)); +#224751 = VERTEX_POINT('',#224752); +#224752 = CARTESIAN_POINT('',(85.2302,-59.639584,1.585)); +#224753 = CIRCLE('',#224754,7.499946135253E-02); +#224754 = AXIS2_PLACEMENT_3D('',#224755,#224756,#224757); +#224755 = CARTESIAN_POINT('',(85.167840133572,-59.68125132847,1.585)); +#224756 = DIRECTION('',(0.,0.,-1.)); +#224757 = DIRECTION('',(-0.55557910444,0.83146368454,0.)); +#224758 = ORIENTED_EDGE('',*,*,#224759,.T.); +#224759 = EDGE_CURVE('',#224751,#224760,#224762,.T.); +#224760 = VERTEX_POINT('',#224761); +#224761 = CARTESIAN_POINT('',(85.237705,-59.657704,1.585)); +#224762 = LINE('',#224763,#224764); +#224763 = CARTESIAN_POINT('',(85.2302,-59.639584,1.585)); +#224764 = VECTOR('',#224765,1.); +#224765 = DIRECTION('',(0.382659506909,-0.923889442397,0.)); +#224766 = ORIENTED_EDGE('',*,*,#224767,.T.); +#224767 = EDGE_CURVE('',#224760,#224768,#224770,.T.); +#224768 = VERTEX_POINT('',#224769); +#224769 = CARTESIAN_POINT('',(85.343684,-59.607693,1.585)); +#224770 = LINE('',#224771,#224772); +#224771 = CARTESIAN_POINT('',(85.237705,-59.657704,1.585)); +#224772 = VECTOR('',#224773,1.); +#224773 = DIRECTION('',(0.904362746847,0.426764598011,0.)); +#224774 = ORIENTED_EDGE('',*,*,#224775,.T.); +#224775 = EDGE_CURVE('',#224768,#224776,#224778,.T.); +#224776 = VERTEX_POINT('',#224777); +#224777 = CARTESIAN_POINT('',(85.468186,-59.607693,1.585)); +#224778 = LINE('',#224779,#224780); +#224779 = CARTESIAN_POINT('',(85.343684,-59.607693,1.585)); +#224780 = VECTOR('',#224781,1.); +#224781 = DIRECTION('',(1.,0.,0.)); +#224782 = ORIENTED_EDGE('',*,*,#224783,.T.); +#224783 = EDGE_CURVE('',#224776,#224784,#224786,.T.); +#224784 = VERTEX_POINT('',#224785); +#224785 = CARTESIAN_POINT('',(85.453554,-59.756252,1.585)); +#224786 = CIRCLE('',#224787,7.500006711465E-02); +#224787 = AXIS2_PLACEMENT_3D('',#224788,#224789,#224790); +#224788 = CARTESIAN_POINT('',(85.453554067115,-59.68125193288,1.585)); +#224789 = DIRECTION('',(0.,0.,-1.)); +#224790 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#224791 = ORIENTED_EDGE('',*,*,#224792,.T.); +#224792 = EDGE_CURVE('',#224784,#224793,#224795,.T.); +#224793 = VERTEX_POINT('',#224794); +#224794 = CARTESIAN_POINT('',(85.376021,-59.756252,1.585)); +#224795 = LINE('',#224796,#224797); +#224796 = CARTESIAN_POINT('',(85.453554,-59.756252,1.585)); +#224797 = VECTOR('',#224798,1.); +#224798 = DIRECTION('',(-1.,0.,0.)); +#224799 = ORIENTED_EDGE('',*,*,#224800,.T.); +#224800 = EDGE_CURVE('',#224793,#224801,#224803,.T.); +#224801 = VERTEX_POINT('',#224802); +#224802 = CARTESIAN_POINT('',(85.24284,-59.889433,1.585)); +#224803 = CIRCLE('',#224804,0.18686440374); +#224804 = AXIS2_PLACEMENT_3D('',#224805,#224806,#224807); +#224805 = CARTESIAN_POINT('',(85.423557,-59.936969,1.585)); +#224806 = DIRECTION('',(0.,0.,1.)); +#224807 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#224808 = ORIENTED_EDGE('',*,*,#224809,.T.); +#224809 = EDGE_CURVE('',#224801,#224810,#224812,.T.); +#224810 = VERTEX_POINT('',#224811); +#224811 = CARTESIAN_POINT('',(85.241399,-60.362551,1.585)); +#224812 = LINE('',#224813,#224814); +#224813 = CARTESIAN_POINT('',(85.24284,-59.889433,1.585)); +#224814 = VECTOR('',#224815,1.); +#224815 = DIRECTION('',(-3.045737672744E-03,-0.99999536173,0.)); +#224816 = ORIENTED_EDGE('',*,*,#224817,.T.); +#224817 = EDGE_CURVE('',#224810,#224818,#224820,.T.); +#224818 = VERTEX_POINT('',#224819); +#224819 = CARTESIAN_POINT('',(85.09284,-60.347919,1.585)); +#224820 = CIRCLE('',#224821,7.500006711465E-02); +#224821 = AXIS2_PLACEMENT_3D('',#224822,#224823,#224824); +#224822 = CARTESIAN_POINT('',(85.167840067115,-60.34791906711,1.585)); +#224823 = DIRECTION('',(-0.,0.,-1.)); +#224824 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#224825 = ORIENTED_EDGE('',*,*,#224826,.T.); +#224826 = EDGE_CURVE('',#224818,#224827,#224829,.T.); +#224827 = VERTEX_POINT('',#224828); +#224828 = CARTESIAN_POINT('',(85.094281,-59.66662,1.585)); +#224829 = LINE('',#224830,#224831); +#224830 = CARTESIAN_POINT('',(85.09284,-60.347919,1.585)); +#224831 = VECTOR('',#224832,1.); +#224832 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#224833 = ORIENTED_EDGE('',*,*,#224834,.T.); +#224834 = EDGE_CURVE('',#224827,#224835,#224837,.T.); +#224835 = VERTEX_POINT('',#224836); +#224836 = CARTESIAN_POINT('',(85.10548,-59.639584,1.585)); +#224837 = LINE('',#224838,#224839); +#224838 = CARTESIAN_POINT('',(85.094281,-59.66662,1.585)); +#224839 = VECTOR('',#224840,1.); +#224840 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#224841 = ORIENTED_EDGE('',*,*,#224842,.T.); +#224842 = EDGE_CURVE('',#224835,#224749,#224843,.T.); +#224843 = LINE('',#224844,#224845); +#224844 = CARTESIAN_POINT('',(85.10548,-59.639584,1.585)); +#224845 = VECTOR('',#224846,1.); +#224846 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#224847 = PLANE('',#224848); +#224848 = AXIS2_PLACEMENT_3D('',#224849,#224850,#224851); +#224849 = CARTESIAN_POINT('',(0.,0.,1.585)); +#224850 = DIRECTION('',(0.,0.,1.)); +#224851 = DIRECTION('',(1.,0.,-0.)); +#224852 = SHELL_BASED_SURFACE_MODEL('',(#224853)); +#224853 = OPEN_SHELL('',(#224854)); +#224854 = ADVANCED_FACE('',(#224855),#225096,.T.); +#224855 = FACE_BOUND('',#224856,.F.); +#224856 = EDGE_LOOP('',(#224857,#224868,#224876,#224884,#224892,#224900, + #224909,#224917,#224926,#224934,#224942,#224950,#224958,#224966, + #224974,#224983,#224991,#224999,#225007,#225015,#225024,#225032, + #225040,#225048,#225057,#225065,#225073,#225081,#225090)); +#224857 = ORIENTED_EDGE('',*,*,#224858,.T.); +#224858 = EDGE_CURVE('',#224859,#224861,#224863,.T.); +#224859 = VERTEX_POINT('',#224860); +#224860 = CARTESIAN_POINT('',(152.858882,-59.792856,1.585)); +#224861 = VERTEX_POINT('',#224862); +#224862 = CARTESIAN_POINT('',(152.923882,-59.727856,1.585)); +#224863 = CIRCLE('',#224864,6.500103935393E-02); +#224864 = AXIS2_PLACEMENT_3D('',#224865,#224866,#224867); +#224865 = CARTESIAN_POINT('',(152.92388303934,-59.79285703934,1.585)); +#224866 = DIRECTION('',(0.,0.,-1.)); +#224867 = DIRECTION('',(-0.999999999872,1.598967692944E-05,0.)); +#224868 = ORIENTED_EDGE('',*,*,#224869,.T.); +#224869 = EDGE_CURVE('',#224861,#224870,#224872,.T.); +#224870 = VERTEX_POINT('',#224871); +#224871 = CARTESIAN_POINT('',(153.223882,-59.727856,1.585)); +#224872 = LINE('',#224873,#224874); +#224873 = CARTESIAN_POINT('',(152.923882,-59.727856,1.585)); +#224874 = VECTOR('',#224875,1.); +#224875 = DIRECTION('',(1.,0.,0.)); +#224876 = ORIENTED_EDGE('',*,*,#224877,.T.); +#224877 = EDGE_CURVE('',#224870,#224878,#224880,.T.); +#224878 = VERTEX_POINT('',#224879); +#224879 = CARTESIAN_POINT('',(153.248756,-59.732804,1.585)); +#224880 = LINE('',#224881,#224882); +#224881 = CARTESIAN_POINT('',(153.223882,-59.727856,1.585)); +#224882 = VECTOR('',#224883,1.); +#224883 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#224884 = ORIENTED_EDGE('',*,*,#224885,.T.); +#224885 = EDGE_CURVE('',#224878,#224886,#224888,.T.); +#224886 = VERTEX_POINT('',#224887); +#224887 = CARTESIAN_POINT('',(153.269843,-59.746894,1.585)); +#224888 = LINE('',#224889,#224890); +#224889 = CARTESIAN_POINT('',(153.248756,-59.732804,1.585)); +#224890 = VECTOR('',#224891,1.); +#224891 = DIRECTION('',(0.831467480074,-0.555573424111,0.)); +#224892 = ORIENTED_EDGE('',*,*,#224893,.T.); +#224893 = EDGE_CURVE('',#224886,#224894,#224896,.T.); +#224894 = VERTEX_POINT('',#224895); +#224895 = CARTESIAN_POINT('',(153.321003,-59.802175,1.585)); +#224896 = LINE('',#224897,#224898); +#224897 = CARTESIAN_POINT('',(153.269843,-59.746894,1.585)); +#224898 = VECTOR('',#224899,1.); +#224899 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#224900 = ORIENTED_EDGE('',*,*,#224901,.T.); +#224901 = EDGE_CURVE('',#224894,#224902,#224904,.T.); +#224902 = VERTEX_POINT('',#224903); +#224903 = CARTESIAN_POINT('',(153.320999,-60.212113,1.585)); +#224904 = CIRCLE('',#224905,0.409312568567); +#224905 = AXIS2_PLACEMENT_3D('',#224906,#224907,#224908); +#224906 = CARTESIAN_POINT('',(152.96670664807,-60.00714054294,1.585)); +#224907 = DIRECTION('',(0.,0.,-1.)); +#224908 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#224909 = ORIENTED_EDGE('',*,*,#224910,.T.); +#224910 = EDGE_CURVE('',#224902,#224911,#224913,.T.); +#224911 = VERTEX_POINT('',#224912); +#224912 = CARTESIAN_POINT('',(153.218322,-60.316036,1.585)); +#224913 = LINE('',#224914,#224915); +#224914 = CARTESIAN_POINT('',(153.320999,-60.212113,1.585)); +#224915 = VECTOR('',#224916,1.); +#224916 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#224917 = ORIENTED_EDGE('',*,*,#224918,.T.); +#224918 = EDGE_CURVE('',#224911,#224919,#224921,.T.); +#224919 = VERTEX_POINT('',#224920); +#224920 = CARTESIAN_POINT('',(152.779546,-60.413058,1.585)); +#224921 = CIRCLE('',#224922,0.675422176573); +#224922 = AXIS2_PLACEMENT_3D('',#224923,#224924,#224925); +#224923 = CARTESIAN_POINT('',(152.86141275007,-59.74261564465,1.585)); +#224924 = DIRECTION('',(0.,0.,-1.)); +#224925 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#224926 = ORIENTED_EDGE('',*,*,#224927,.T.); +#224927 = EDGE_CURVE('',#224919,#224928,#224930,.T.); +#224928 = VERTEX_POINT('',#224929); +#224929 = CARTESIAN_POINT('',(152.594813,-60.36528,1.585)); +#224930 = LINE('',#224931,#224932); +#224931 = CARTESIAN_POINT('',(152.779546,-60.413058,1.585)); +#224932 = VECTOR('',#224933,1.); +#224933 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#224934 = ORIENTED_EDGE('',*,*,#224935,.T.); +#224935 = EDGE_CURVE('',#224928,#224936,#224938,.T.); +#224936 = VERTEX_POINT('',#224937); +#224937 = CARTESIAN_POINT('',(152.492206,-60.310247,1.585)); +#224938 = LINE('',#224939,#224940); +#224939 = CARTESIAN_POINT('',(152.594813,-60.36528,1.585)); +#224940 = VECTOR('',#224941,1.); +#224941 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#224942 = ORIENTED_EDGE('',*,*,#224943,.T.); +#224943 = EDGE_CURVE('',#224936,#224944,#224946,.T.); +#224944 = VERTEX_POINT('',#224945); +#224945 = CARTESIAN_POINT('',(152.398191,-60.212109,1.585)); +#224946 = LINE('',#224947,#224948); +#224947 = CARTESIAN_POINT('',(152.492206,-60.310247,1.585)); +#224948 = VECTOR('',#224949,1.); +#224949 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#224950 = ORIENTED_EDGE('',*,*,#224951,.T.); +#224951 = EDGE_CURVE('',#224944,#224952,#224954,.T.); +#224952 = VERTEX_POINT('',#224953); +#224953 = CARTESIAN_POINT('',(152.34663,-60.060221,1.585)); +#224954 = LINE('',#224955,#224956); +#224955 = CARTESIAN_POINT('',(152.398191,-60.212109,1.585)); +#224956 = VECTOR('',#224957,1.); +#224957 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#224958 = ORIENTED_EDGE('',*,*,#224959,.T.); +#224959 = EDGE_CURVE('',#224952,#224960,#224962,.T.); +#224960 = VERTEX_POINT('',#224961); +#224961 = CARTESIAN_POINT('',(152.347512,-59.906771,1.585)); +#224962 = LINE('',#224963,#224964); +#224963 = CARTESIAN_POINT('',(152.34663,-60.060221,1.585)); +#224964 = VECTOR('',#224965,1.); +#224965 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#224966 = ORIENTED_EDGE('',*,*,#224967,.T.); +#224967 = EDGE_CURVE('',#224960,#224968,#224970,.T.); +#224968 = VERTEX_POINT('',#224969); +#224969 = CARTESIAN_POINT('',(152.394316,-59.806644,1.585)); +#224970 = LINE('',#224971,#224972); +#224971 = CARTESIAN_POINT('',(152.347512,-59.906771,1.585)); +#224972 = VECTOR('',#224973,1.); +#224973 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#224974 = ORIENTED_EDGE('',*,*,#224975,.T.); +#224975 = EDGE_CURVE('',#224968,#224976,#224978,.T.); +#224976 = VERTEX_POINT('',#224977); +#224977 = CARTESIAN_POINT('',(152.510592,-59.864782,1.585)); +#224978 = CIRCLE('',#224979,6.500026004258E-02); +#224979 = AXIS2_PLACEMENT_3D('',#224980,#224981,#224982); +#224980 = CARTESIAN_POINT('',(152.45245365279,-59.8357136944,1.585)); +#224981 = DIRECTION('',(0.,0.,-1.)); +#224982 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#224983 = ORIENTED_EDGE('',*,*,#224984,.T.); +#224984 = EDGE_CURVE('',#224976,#224985,#224987,.T.); +#224985 = VERTEX_POINT('',#224986); +#224986 = CARTESIAN_POINT('',(152.474597,-59.936772,1.585)); +#224987 = LINE('',#224988,#224989); +#224988 = CARTESIAN_POINT('',(152.510592,-59.864782,1.585)); +#224989 = VECTOR('',#224990,1.); +#224990 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#224991 = ORIENTED_EDGE('',*,*,#224992,.T.); +#224992 = EDGE_CURVE('',#224985,#224993,#224995,.T.); +#224993 = VERTEX_POINT('',#224994); +#224994 = CARTESIAN_POINT('',(152.474597,-60.039452,1.585)); +#224995 = LINE('',#224996,#224997); +#224996 = CARTESIAN_POINT('',(152.474597,-59.936772,1.585)); +#224997 = VECTOR('',#224998,1.); +#224998 = DIRECTION('',(0.,-1.,0.)); +#224999 = ORIENTED_EDGE('',*,*,#225000,.T.); +#225000 = EDGE_CURVE('',#224993,#225001,#225003,.T.); +#225001 = VERTEX_POINT('',#225002); +#225002 = CARTESIAN_POINT('',(152.509265,-60.143457,1.585)); +#225003 = LINE('',#225004,#225005); +#225004 = CARTESIAN_POINT('',(152.474597,-60.039452,1.585)); +#225005 = VECTOR('',#225006,1.); +#225006 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#225007 = ORIENTED_EDGE('',*,*,#225008,.T.); +#225008 = EDGE_CURVE('',#225001,#225009,#225011,.T.); +#225009 = VERTEX_POINT('',#225010); +#225010 = CARTESIAN_POINT('',(152.576669,-60.210863,1.585)); +#225011 = LINE('',#225012,#225013); +#225012 = CARTESIAN_POINT('',(152.509265,-60.143457,1.585)); +#225013 = VECTOR('',#225014,1.); +#225014 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#225015 = ORIENTED_EDGE('',*,*,#225016,.T.); +#225016 = EDGE_CURVE('',#225009,#225017,#225019,.T.); +#225017 = VERTEX_POINT('',#225018); +#225018 = CARTESIAN_POINT('',(152.915881,-60.284999,1.585)); +#225019 = CIRCLE('',#225020,0.553317785495); +#225020 = AXIS2_PLACEMENT_3D('',#225021,#225022,#225023); +#225021 = CARTESIAN_POINT('',(152.8584500839,-59.73466976979,1.585)); +#225022 = DIRECTION('',(0.,0.,1.)); +#225023 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#225024 = ORIENTED_EDGE('',*,*,#225025,.T.); +#225025 = EDGE_CURVE('',#225017,#225026,#225028,.T.); +#225026 = VERTEX_POINT('',#225027); +#225027 = CARTESIAN_POINT('',(153.072622,-60.245813,1.585)); +#225028 = LINE('',#225029,#225030); +#225029 = CARTESIAN_POINT('',(152.915881,-60.284999,1.585)); +#225030 = VECTOR('',#225031,1.); +#225031 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#225032 = ORIENTED_EDGE('',*,*,#225033,.T.); +#225033 = EDGE_CURVE('',#225026,#225034,#225036,.T.); +#225034 = VERTEX_POINT('',#225035); +#225035 = CARTESIAN_POINT('',(153.142522,-60.210864,1.585)); +#225036 = LINE('',#225037,#225038); +#225037 = CARTESIAN_POINT('',(153.072622,-60.245813,1.585)); +#225038 = VECTOR('',#225039,1.); +#225039 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#225040 = ORIENTED_EDGE('',*,*,#225041,.T.); +#225041 = EDGE_CURVE('',#225034,#225042,#225044,.T.); +#225042 = VERTEX_POINT('',#225043); +#225043 = CARTESIAN_POINT('',(153.209928,-60.143457,1.585)); +#225044 = LINE('',#225045,#225046); +#225045 = CARTESIAN_POINT('',(153.142522,-60.210864,1.585)); +#225046 = VECTOR('',#225047,1.); +#225047 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#225048 = ORIENTED_EDGE('',*,*,#225049,.T.); +#225049 = EDGE_CURVE('',#225042,#225050,#225052,.T.); +#225050 = VERTEX_POINT('',#225051); +#225051 = CARTESIAN_POINT('',(153.209928,-59.870825,1.585)); +#225052 = CIRCLE('',#225053,0.272194686174); +#225053 = AXIS2_PLACEMENT_3D('',#225054,#225055,#225056); +#225054 = CARTESIAN_POINT('',(152.97432686391,-60.007141,1.585)); +#225055 = DIRECTION('',(0.,-0.,1.)); +#225056 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#225057 = ORIENTED_EDGE('',*,*,#225058,.T.); +#225058 = EDGE_CURVE('',#225050,#225059,#225061,.T.); +#225059 = VERTEX_POINT('',#225060); +#225060 = CARTESIAN_POINT('',(153.196959,-59.857856,1.585)); +#225061 = LINE('',#225062,#225063); +#225062 = CARTESIAN_POINT('',(153.209928,-59.870825,1.585)); +#225063 = VECTOR('',#225064,1.); +#225064 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#225065 = ORIENTED_EDGE('',*,*,#225066,.T.); +#225066 = EDGE_CURVE('',#225059,#225067,#225069,.T.); +#225067 = VERTEX_POINT('',#225068); +#225068 = CARTESIAN_POINT('',(152.988882,-59.857856,1.585)); +#225069 = LINE('',#225070,#225071); +#225070 = CARTESIAN_POINT('',(153.196959,-59.857856,1.585)); +#225071 = VECTOR('',#225072,1.); +#225072 = DIRECTION('',(-1.,0.,0.)); +#225073 = ORIENTED_EDGE('',*,*,#225074,.T.); +#225074 = EDGE_CURVE('',#225067,#225075,#225077,.T.); +#225075 = VERTEX_POINT('',#225076); +#225076 = CARTESIAN_POINT('',(152.988882,-59.964285,1.585)); +#225077 = LINE('',#225078,#225079); +#225078 = CARTESIAN_POINT('',(152.988882,-59.857856,1.585)); +#225079 = VECTOR('',#225080,1.); +#225080 = DIRECTION('',(0.,-1.,0.)); +#225081 = ORIENTED_EDGE('',*,*,#225082,.T.); +#225082 = EDGE_CURVE('',#225075,#225083,#225085,.T.); +#225083 = VERTEX_POINT('',#225084); +#225084 = CARTESIAN_POINT('',(152.858882,-59.964285,1.585)); +#225085 = CIRCLE('',#225086,6.500000000091E-02); +#225086 = AXIS2_PLACEMENT_3D('',#225087,#225088,#225089); +#225087 = CARTESIAN_POINT('',(152.923882,-59.96428465513,1.585)); +#225088 = DIRECTION('',(-0.,0.,-1.)); +#225089 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#225090 = ORIENTED_EDGE('',*,*,#225091,.T.); +#225091 = EDGE_CURVE('',#225083,#224859,#225092,.T.); +#225092 = LINE('',#225093,#225094); +#225093 = CARTESIAN_POINT('',(152.858882,-59.964285,1.585)); +#225094 = VECTOR('',#225095,1.); +#225095 = DIRECTION('',(0.,1.,0.)); +#225096 = PLANE('',#225097); +#225097 = AXIS2_PLACEMENT_3D('',#225098,#225099,#225100); +#225098 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225099 = DIRECTION('',(0.,0.,1.)); +#225100 = DIRECTION('',(1.,0.,-0.)); +#225101 = SHELL_BASED_SURFACE_MODEL('',(#225102)); +#225102 = OPEN_SHELL('',(#225103)); +#225103 = ADVANCED_FACE('',(#225104),#225190,.T.); +#225104 = FACE_BOUND('',#225105,.F.); +#225105 = EDGE_LOOP('',(#225106,#225117,#225125,#225134,#225142,#225151, + #225159,#225167,#225175,#225184)); +#225106 = ORIENTED_EDGE('',*,*,#225107,.T.); +#225107 = EDGE_CURVE('',#225108,#225110,#225112,.T.); +#225108 = VERTEX_POINT('',#225109); +#225109 = CARTESIAN_POINT('',(137.83,-59.34,1.585)); +#225110 = VERTEX_POINT('',#225111); +#225111 = CARTESIAN_POINT('',(137.89,-59.28,1.585)); +#225112 = CIRCLE('',#225113,5.999932016253E-02); +#225113 = AXIS2_PLACEMENT_3D('',#225114,#225115,#225116); +#225114 = CARTESIAN_POINT('',(137.88999932015,-59.33999932015,1.585)); +#225115 = DIRECTION('',(0.,0.,-1.)); +#225116 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#225117 = ORIENTED_EDGE('',*,*,#225118,.T.); +#225118 = EDGE_CURVE('',#225110,#225119,#225121,.T.); +#225119 = VERTEX_POINT('',#225120); +#225120 = CARTESIAN_POINT('',(139.41,-59.28,1.585)); +#225121 = LINE('',#225122,#225123); +#225122 = CARTESIAN_POINT('',(137.89,-59.28,1.585)); +#225123 = VECTOR('',#225124,1.); +#225124 = DIRECTION('',(1.,0.,0.)); +#225125 = ORIENTED_EDGE('',*,*,#225126,.T.); +#225126 = EDGE_CURVE('',#225119,#225127,#225129,.T.); +#225127 = VERTEX_POINT('',#225128); +#225128 = CARTESIAN_POINT('',(139.47,-59.34,1.585)); +#225129 = CIRCLE('',#225130,5.999932016259E-02); +#225130 = AXIS2_PLACEMENT_3D('',#225131,#225132,#225133); +#225131 = CARTESIAN_POINT('',(139.41000067984,-59.33999932015,1.585)); +#225132 = DIRECTION('',(0.,0.,-1.)); +#225133 = DIRECTION('',(-1.133081612142E-05,0.999999999936,0.)); +#225134 = ORIENTED_EDGE('',*,*,#225135,.T.); +#225135 = EDGE_CURVE('',#225127,#225136,#225138,.T.); +#225136 = VERTEX_POINT('',#225137); +#225137 = CARTESIAN_POINT('',(139.47,-60.34,1.585)); +#225138 = LINE('',#225139,#225140); +#225139 = CARTESIAN_POINT('',(139.47,-59.34,1.585)); +#225140 = VECTOR('',#225141,1.); +#225141 = DIRECTION('',(0.,-1.,0.)); +#225142 = ORIENTED_EDGE('',*,*,#225143,.T.); +#225143 = EDGE_CURVE('',#225136,#225144,#225146,.T.); +#225144 = VERTEX_POINT('',#225145); +#225145 = CARTESIAN_POINT('',(139.35,-60.34,1.585)); +#225146 = CIRCLE('',#225147,6.000000000043E-02); +#225147 = AXIS2_PLACEMENT_3D('',#225148,#225149,#225150); +#225148 = CARTESIAN_POINT('',(139.41,-60.34000022558,1.585)); +#225149 = DIRECTION('',(0.,0.,-1.)); +#225150 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#225151 = ORIENTED_EDGE('',*,*,#225152,.T.); +#225152 = EDGE_CURVE('',#225144,#225153,#225155,.T.); +#225153 = VERTEX_POINT('',#225154); +#225154 = CARTESIAN_POINT('',(139.35,-59.4,1.585)); +#225155 = LINE('',#225156,#225157); +#225156 = CARTESIAN_POINT('',(139.35,-60.34,1.585)); +#225157 = VECTOR('',#225158,1.); +#225158 = DIRECTION('',(0.,1.,0.)); +#225159 = ORIENTED_EDGE('',*,*,#225160,.T.); +#225160 = EDGE_CURVE('',#225153,#225161,#225163,.T.); +#225161 = VERTEX_POINT('',#225162); +#225162 = CARTESIAN_POINT('',(137.948011,-59.4,1.585)); +#225163 = LINE('',#225164,#225165); +#225164 = CARTESIAN_POINT('',(139.35,-59.4,1.585)); +#225165 = VECTOR('',#225166,1.); +#225166 = DIRECTION('',(-1.,0.,0.)); +#225167 = ORIENTED_EDGE('',*,*,#225168,.T.); +#225168 = EDGE_CURVE('',#225161,#225169,#225171,.T.); +#225169 = VERTEX_POINT('',#225170); +#225170 = CARTESIAN_POINT('',(137.945433,-59.412961,1.585)); +#225171 = LINE('',#225172,#225173); +#225172 = CARTESIAN_POINT('',(137.948011,-59.4,1.585)); +#225173 = VECTOR('',#225174,1.); +#225174 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#225175 = ORIENTED_EDGE('',*,*,#225176,.T.); +#225176 = EDGE_CURVE('',#225169,#225177,#225179,.T.); +#225177 = VERTEX_POINT('',#225178); +#225178 = CARTESIAN_POINT('',(137.83,-59.39,1.585)); +#225179 = CIRCLE('',#225180,6.000007318647E-02); +#225180 = AXIS2_PLACEMENT_3D('',#225181,#225182,#225183); +#225181 = CARTESIAN_POINT('',(137.89000007318,-59.39000017668,1.585)); +#225182 = DIRECTION('',(-0.,0.,-1.)); +#225183 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#225184 = ORIENTED_EDGE('',*,*,#225185,.T.); +#225185 = EDGE_CURVE('',#225177,#225108,#225186,.T.); +#225186 = LINE('',#225187,#225188); +#225187 = CARTESIAN_POINT('',(137.83,-59.39,1.585)); +#225188 = VECTOR('',#225189,1.); +#225189 = DIRECTION('',(0.,1.,0.)); +#225190 = PLANE('',#225191); +#225191 = AXIS2_PLACEMENT_3D('',#225192,#225193,#225194); +#225192 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225193 = DIRECTION('',(0.,0.,1.)); +#225194 = DIRECTION('',(1.,0.,-0.)); +#225195 = SHELL_BASED_SURFACE_MODEL('',(#225196)); +#225196 = OPEN_SHELL('',(#225197)); +#225197 = ADVANCED_FACE('',(#225198),#225258,.T.); +#225198 = FACE_BOUND('',#225199,.F.); +#225199 = EDGE_LOOP('',(#225200,#225211,#225219,#225227,#225235,#225243, + #225252)); +#225200 = ORIENTED_EDGE('',*,*,#225201,.T.); +#225201 = EDGE_CURVE('',#225202,#225204,#225206,.T.); +#225202 = VERTEX_POINT('',#225203); +#225203 = CARTESIAN_POINT('',(143.91,-60.21,1.585)); +#225204 = VERTEX_POINT('',#225205); +#225205 = CARTESIAN_POINT('',(143.861476,-60.11471,1.585)); +#225206 = CIRCLE('',#225207,6.000027696172E-02); +#225207 = AXIS2_PLACEMENT_3D('',#225208,#225209,#225210); +#225208 = CARTESIAN_POINT('',(143.91000092846,-60.14999972304,1.585)); +#225209 = DIRECTION('',(0.,0.,-1.)); +#225210 = DIRECTION('',(-1.547440111751E-05,-0.99999999988,-0.)); +#225211 = ORIENTED_EDGE('',*,*,#225212,.T.); +#225212 = EDGE_CURVE('',#225204,#225213,#225215,.T.); +#225213 = VERTEX_POINT('',#225214); +#225214 = CARTESIAN_POINT('',(144.101476,-59.78471,1.585)); +#225215 = LINE('',#225216,#225217); +#225216 = CARTESIAN_POINT('',(143.861476,-60.11471,1.585)); +#225217 = VECTOR('',#225218,1.); +#225218 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#225219 = ORIENTED_EDGE('',*,*,#225220,.T.); +#225220 = EDGE_CURVE('',#225213,#225221,#225223,.T.); +#225221 = VERTEX_POINT('',#225222); +#225222 = CARTESIAN_POINT('',(144.140642,-59.760734,1.585)); +#225223 = LINE('',#225224,#225225); +#225224 = CARTESIAN_POINT('',(144.101476,-59.78471,1.585)); +#225225 = VECTOR('',#225226,1.); +#225226 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#225227 = ORIENTED_EDGE('',*,*,#225228,.T.); +#225228 = EDGE_CURVE('',#225221,#225229,#225231,.T.); +#225229 = VERTEX_POINT('',#225230); +#225230 = CARTESIAN_POINT('',(144.18529,-59.771476,1.585)); +#225231 = LINE('',#225232,#225233); +#225232 = CARTESIAN_POINT('',(144.140642,-59.760734,1.585)); +#225233 = VECTOR('',#225234,1.); +#225234 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#225235 = ORIENTED_EDGE('',*,*,#225236,.T.); +#225236 = EDGE_CURVE('',#225229,#225237,#225239,.T.); +#225237 = VERTEX_POINT('',#225238); +#225238 = CARTESIAN_POINT('',(144.438524,-60.11471,1.585)); +#225239 = LINE('',#225240,#225241); +#225240 = CARTESIAN_POINT('',(144.18529,-59.771476,1.585)); +#225241 = VECTOR('',#225242,1.); +#225242 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#225243 = ORIENTED_EDGE('',*,*,#225244,.T.); +#225244 = EDGE_CURVE('',#225237,#225245,#225247,.T.); +#225245 = VERTEX_POINT('',#225246); +#225246 = CARTESIAN_POINT('',(144.39,-60.21,1.585)); +#225247 = CIRCLE('',#225248,5.999941814204E-02); +#225248 = AXIS2_PLACEMENT_3D('',#225249,#225250,#225251); +#225249 = CARTESIAN_POINT('',(144.39000075805,-60.15000058186,1.585)); +#225250 = DIRECTION('',(0.,0.,-1.)); +#225251 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#225252 = ORIENTED_EDGE('',*,*,#225253,.T.); +#225253 = EDGE_CURVE('',#225245,#225202,#225254,.T.); +#225254 = LINE('',#225255,#225256); +#225255 = CARTESIAN_POINT('',(144.39,-60.21,1.585)); +#225256 = VECTOR('',#225257,1.); +#225257 = DIRECTION('',(-1.,0.,0.)); +#225258 = PLANE('',#225259); +#225259 = AXIS2_PLACEMENT_3D('',#225260,#225261,#225262); +#225260 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225261 = DIRECTION('',(0.,0.,1.)); +#225262 = DIRECTION('',(1.,0.,-0.)); +#225263 = SHELL_BASED_SURFACE_MODEL('',(#225264)); +#225264 = OPEN_SHELL('',(#225265)); +#225265 = ADVANCED_FACE('',(#225266),#225302,.T.); +#225266 = FACE_BOUND('',#225267,.F.); +#225267 = EDGE_LOOP('',(#225268,#225279,#225287,#225296)); +#225268 = ORIENTED_EDGE('',*,*,#225269,.T.); +#225269 = EDGE_CURVE('',#225270,#225272,#225274,.T.); +#225270 = VERTEX_POINT('',#225271); +#225271 = CARTESIAN_POINT('',(163.629392,-59.9056,1.585)); +#225272 = VERTEX_POINT('',#225273); +#225273 = CARTESIAN_POINT('',(163.629392,-59.7856,1.585)); +#225274 = CIRCLE('',#225275,6.000000000042E-02); +#225275 = AXIS2_PLACEMENT_3D('',#225276,#225277,#225278); +#225276 = CARTESIAN_POINT('',(163.62939177441,-59.8456,1.585)); +#225277 = DIRECTION('',(0.,0.,-1.)); +#225278 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#225279 = ORIENTED_EDGE('',*,*,#225280,.T.); +#225280 = EDGE_CURVE('',#225272,#225281,#225283,.T.); +#225281 = VERTEX_POINT('',#225282); +#225282 = CARTESIAN_POINT('',(164.103908,-59.7856,1.585)); +#225283 = LINE('',#225284,#225285); +#225284 = CARTESIAN_POINT('',(163.629392,-59.7856,1.585)); +#225285 = VECTOR('',#225286,1.); +#225286 = DIRECTION('',(1.,0.,0.)); +#225287 = ORIENTED_EDGE('',*,*,#225288,.T.); +#225288 = EDGE_CURVE('',#225281,#225289,#225291,.T.); +#225289 = VERTEX_POINT('',#225290); +#225290 = CARTESIAN_POINT('',(164.103908,-59.9056,1.585)); +#225291 = CIRCLE('',#225292,6.000000000043E-02); +#225292 = AXIS2_PLACEMENT_3D('',#225293,#225294,#225295); +#225293 = CARTESIAN_POINT('',(164.10390822558,-59.8456,1.585)); +#225294 = DIRECTION('',(0.,0.,-1.)); +#225295 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#225296 = ORIENTED_EDGE('',*,*,#225297,.T.); +#225297 = EDGE_CURVE('',#225289,#225270,#225298,.T.); +#225298 = LINE('',#225299,#225300); +#225299 = CARTESIAN_POINT('',(164.103908,-59.9056,1.585)); +#225300 = VECTOR('',#225301,1.); +#225301 = DIRECTION('',(-1.,0.,0.)); +#225302 = PLANE('',#225303); +#225303 = AXIS2_PLACEMENT_3D('',#225304,#225305,#225306); +#225304 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225305 = DIRECTION('',(0.,0.,1.)); +#225306 = DIRECTION('',(1.,0.,-0.)); +#225307 = SHELL_BASED_SURFACE_MODEL('',(#225308)); +#225308 = OPEN_SHELL('',(#225309)); +#225309 = ADVANCED_FACE('',(#225310),#225346,.T.); +#225310 = FACE_BOUND('',#225311,.F.); +#225311 = EDGE_LOOP('',(#225312,#225323,#225331,#225340)); +#225312 = ORIENTED_EDGE('',*,*,#225313,.T.); +#225313 = EDGE_CURVE('',#225314,#225316,#225318,.T.); +#225314 = VERTEX_POINT('',#225315); +#225315 = CARTESIAN_POINT('',(167.129392,-59.9056,1.585)); +#225316 = VERTEX_POINT('',#225317); +#225317 = CARTESIAN_POINT('',(167.129392,-59.7856,1.585)); +#225318 = CIRCLE('',#225319,6.000000000042E-02); +#225319 = AXIS2_PLACEMENT_3D('',#225320,#225321,#225322); +#225320 = CARTESIAN_POINT('',(167.12939177441,-59.8456,1.585)); +#225321 = DIRECTION('',(0.,0.,-1.)); +#225322 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#225323 = ORIENTED_EDGE('',*,*,#225324,.T.); +#225324 = EDGE_CURVE('',#225316,#225325,#225327,.T.); +#225325 = VERTEX_POINT('',#225326); +#225326 = CARTESIAN_POINT('',(167.603908,-59.7856,1.585)); +#225327 = LINE('',#225328,#225329); +#225328 = CARTESIAN_POINT('',(167.129392,-59.7856,1.585)); +#225329 = VECTOR('',#225330,1.); +#225330 = DIRECTION('',(1.,0.,0.)); +#225331 = ORIENTED_EDGE('',*,*,#225332,.T.); +#225332 = EDGE_CURVE('',#225325,#225333,#225335,.T.); +#225333 = VERTEX_POINT('',#225334); +#225334 = CARTESIAN_POINT('',(167.603908,-59.9056,1.585)); +#225335 = CIRCLE('',#225336,6.000000000043E-02); +#225336 = AXIS2_PLACEMENT_3D('',#225337,#225338,#225339); +#225337 = CARTESIAN_POINT('',(167.60390822558,-59.8456,1.585)); +#225338 = DIRECTION('',(0.,0.,-1.)); +#225339 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#225340 = ORIENTED_EDGE('',*,*,#225341,.T.); +#225341 = EDGE_CURVE('',#225333,#225314,#225342,.T.); +#225342 = LINE('',#225343,#225344); +#225343 = CARTESIAN_POINT('',(167.603908,-59.9056,1.585)); +#225344 = VECTOR('',#225345,1.); +#225345 = DIRECTION('',(-1.,0.,0.)); +#225346 = PLANE('',#225347); +#225347 = AXIS2_PLACEMENT_3D('',#225348,#225349,#225350); +#225348 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225349 = DIRECTION('',(0.,0.,1.)); +#225350 = DIRECTION('',(1.,0.,-0.)); +#225351 = SHELL_BASED_SURFACE_MODEL('',(#225352)); +#225352 = OPEN_SHELL('',(#225353)); +#225353 = ADVANCED_FACE('',(#225354),#225390,.T.); +#225354 = FACE_BOUND('',#225355,.F.); +#225355 = EDGE_LOOP('',(#225356,#225367,#225375,#225384)); +#225356 = ORIENTED_EDGE('',*,*,#225357,.T.); +#225357 = EDGE_CURVE('',#225358,#225360,#225362,.T.); +#225358 = VERTEX_POINT('',#225359); +#225359 = CARTESIAN_POINT('',(173.954392,-59.9056,1.585)); +#225360 = VERTEX_POINT('',#225361); +#225361 = CARTESIAN_POINT('',(173.954392,-59.7856,1.585)); +#225362 = CIRCLE('',#225363,6.000000000042E-02); +#225363 = AXIS2_PLACEMENT_3D('',#225364,#225365,#225366); +#225364 = CARTESIAN_POINT('',(173.95439177441,-59.8456,1.585)); +#225365 = DIRECTION('',(0.,0.,-1.)); +#225366 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#225367 = ORIENTED_EDGE('',*,*,#225368,.T.); +#225368 = EDGE_CURVE('',#225360,#225369,#225371,.T.); +#225369 = VERTEX_POINT('',#225370); +#225370 = CARTESIAN_POINT('',(174.428908,-59.7856,1.585)); +#225371 = LINE('',#225372,#225373); +#225372 = CARTESIAN_POINT('',(173.954392,-59.7856,1.585)); +#225373 = VECTOR('',#225374,1.); +#225374 = DIRECTION('',(1.,0.,0.)); +#225375 = ORIENTED_EDGE('',*,*,#225376,.T.); +#225376 = EDGE_CURVE('',#225369,#225377,#225379,.T.); +#225377 = VERTEX_POINT('',#225378); +#225378 = CARTESIAN_POINT('',(174.428908,-59.9056,1.585)); +#225379 = CIRCLE('',#225380,6.000000000043E-02); +#225380 = AXIS2_PLACEMENT_3D('',#225381,#225382,#225383); +#225381 = CARTESIAN_POINT('',(174.42890822558,-59.8456,1.585)); +#225382 = DIRECTION('',(0.,0.,-1.)); +#225383 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#225384 = ORIENTED_EDGE('',*,*,#225385,.T.); +#225385 = EDGE_CURVE('',#225377,#225358,#225386,.T.); +#225386 = LINE('',#225387,#225388); +#225387 = CARTESIAN_POINT('',(174.428908,-59.9056,1.585)); +#225388 = VECTOR('',#225389,1.); +#225389 = DIRECTION('',(-1.,0.,0.)); +#225390 = PLANE('',#225391); +#225391 = AXIS2_PLACEMENT_3D('',#225392,#225393,#225394); +#225392 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225393 = DIRECTION('',(0.,0.,1.)); +#225394 = DIRECTION('',(1.,0.,-0.)); +#225395 = SHELL_BASED_SURFACE_MODEL('',(#225396)); +#225396 = OPEN_SHELL('',(#225397)); +#225397 = ADVANCED_FACE('',(#225398),#225434,.T.); +#225398 = FACE_BOUND('',#225399,.F.); +#225399 = EDGE_LOOP('',(#225400,#225411,#225419,#225428)); +#225400 = ORIENTED_EDGE('',*,*,#225401,.T.); +#225401 = EDGE_CURVE('',#225402,#225404,#225406,.T.); +#225402 = VERTEX_POINT('',#225403); +#225403 = CARTESIAN_POINT('',(177.954392,-59.9056,1.585)); +#225404 = VERTEX_POINT('',#225405); +#225405 = CARTESIAN_POINT('',(177.954392,-59.7856,1.585)); +#225406 = CIRCLE('',#225407,6.000000000042E-02); +#225407 = AXIS2_PLACEMENT_3D('',#225408,#225409,#225410); +#225408 = CARTESIAN_POINT('',(177.95439177441,-59.8456,1.585)); +#225409 = DIRECTION('',(0.,0.,-1.)); +#225410 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#225411 = ORIENTED_EDGE('',*,*,#225412,.T.); +#225412 = EDGE_CURVE('',#225404,#225413,#225415,.T.); +#225413 = VERTEX_POINT('',#225414); +#225414 = CARTESIAN_POINT('',(178.428908,-59.7856,1.585)); +#225415 = LINE('',#225416,#225417); +#225416 = CARTESIAN_POINT('',(177.954392,-59.7856,1.585)); +#225417 = VECTOR('',#225418,1.); +#225418 = DIRECTION('',(1.,0.,0.)); +#225419 = ORIENTED_EDGE('',*,*,#225420,.T.); +#225420 = EDGE_CURVE('',#225413,#225421,#225423,.T.); +#225421 = VERTEX_POINT('',#225422); +#225422 = CARTESIAN_POINT('',(178.428908,-59.9056,1.585)); +#225423 = CIRCLE('',#225424,6.000000000043E-02); +#225424 = AXIS2_PLACEMENT_3D('',#225425,#225426,#225427); +#225425 = CARTESIAN_POINT('',(178.42890822558,-59.8456,1.585)); +#225426 = DIRECTION('',(0.,0.,-1.)); +#225427 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#225428 = ORIENTED_EDGE('',*,*,#225429,.T.); +#225429 = EDGE_CURVE('',#225421,#225402,#225430,.T.); +#225430 = LINE('',#225431,#225432); +#225431 = CARTESIAN_POINT('',(178.428908,-59.9056,1.585)); +#225432 = VECTOR('',#225433,1.); +#225433 = DIRECTION('',(-1.,0.,0.)); +#225434 = PLANE('',#225435); +#225435 = AXIS2_PLACEMENT_3D('',#225436,#225437,#225438); +#225436 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225437 = DIRECTION('',(0.,0.,1.)); +#225438 = DIRECTION('',(1.,0.,-0.)); +#225439 = SHELL_BASED_SURFACE_MODEL('',(#225440)); +#225440 = OPEN_SHELL('',(#225441)); +#225441 = ADVANCED_FACE('',(#225442),#225528,.T.); +#225442 = FACE_BOUND('',#225443,.F.); +#225443 = EDGE_LOOP('',(#225444,#225455,#225463,#225472,#225480,#225489, + #225497,#225505,#225513,#225522)); +#225444 = ORIENTED_EDGE('',*,*,#225445,.T.); +#225445 = EDGE_CURVE('',#225446,#225448,#225450,.T.); +#225446 = VERTEX_POINT('',#225447); +#225447 = CARTESIAN_POINT('',(144.63,-58.64,1.585)); +#225448 = VERTEX_POINT('',#225449); +#225449 = CARTESIAN_POINT('',(144.69,-58.58,1.585)); +#225450 = CIRCLE('',#225451,5.999932016262E-02); +#225451 = AXIS2_PLACEMENT_3D('',#225452,#225453,#225454); +#225452 = CARTESIAN_POINT('',(144.68999932015,-58.63999932015,1.585)); +#225453 = DIRECTION('',(0.,0.,-1.)); +#225454 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#225455 = ORIENTED_EDGE('',*,*,#225456,.T.); +#225456 = EDGE_CURVE('',#225448,#225457,#225459,.T.); +#225457 = VERTEX_POINT('',#225458); +#225458 = CARTESIAN_POINT('',(146.21,-58.58,1.585)); +#225459 = LINE('',#225460,#225461); +#225460 = CARTESIAN_POINT('',(144.69,-58.58,1.585)); +#225461 = VECTOR('',#225462,1.); +#225462 = DIRECTION('',(1.,0.,0.)); +#225463 = ORIENTED_EDGE('',*,*,#225464,.T.); +#225464 = EDGE_CURVE('',#225457,#225465,#225467,.T.); +#225465 = VERTEX_POINT('',#225466); +#225466 = CARTESIAN_POINT('',(146.27,-58.64,1.585)); +#225467 = CIRCLE('',#225468,5.999932016265E-02); +#225468 = AXIS2_PLACEMENT_3D('',#225469,#225470,#225471); +#225469 = CARTESIAN_POINT('',(146.21000067984,-58.63999932015,1.585)); +#225470 = DIRECTION('',(0.,0.,-1.)); +#225471 = DIRECTION('',(-1.133081517401E-05,0.999999999936,0.)); +#225472 = ORIENTED_EDGE('',*,*,#225473,.T.); +#225473 = EDGE_CURVE('',#225465,#225474,#225476,.T.); +#225474 = VERTEX_POINT('',#225475); +#225475 = CARTESIAN_POINT('',(146.27,-59.64,1.585)); +#225476 = LINE('',#225477,#225478); +#225477 = CARTESIAN_POINT('',(146.27,-58.64,1.585)); +#225478 = VECTOR('',#225479,1.); +#225479 = DIRECTION('',(0.,-1.,0.)); +#225480 = ORIENTED_EDGE('',*,*,#225481,.T.); +#225481 = EDGE_CURVE('',#225474,#225482,#225484,.T.); +#225482 = VERTEX_POINT('',#225483); +#225483 = CARTESIAN_POINT('',(146.15,-59.64,1.585)); +#225484 = CIRCLE('',#225485,6.000000000042E-02); +#225485 = AXIS2_PLACEMENT_3D('',#225486,#225487,#225488); +#225486 = CARTESIAN_POINT('',(146.21,-59.64000022558,1.585)); +#225487 = DIRECTION('',(0.,0.,-1.)); +#225488 = DIRECTION('',(0.999999999993,3.759793898414E-06,0.)); +#225489 = ORIENTED_EDGE('',*,*,#225490,.T.); +#225490 = EDGE_CURVE('',#225482,#225491,#225493,.T.); +#225491 = VERTEX_POINT('',#225492); +#225492 = CARTESIAN_POINT('',(146.15,-58.7,1.585)); +#225493 = LINE('',#225494,#225495); +#225494 = CARTESIAN_POINT('',(146.15,-59.64,1.585)); +#225495 = VECTOR('',#225496,1.); +#225496 = DIRECTION('',(0.,1.,0.)); +#225497 = ORIENTED_EDGE('',*,*,#225498,.T.); +#225498 = EDGE_CURVE('',#225491,#225499,#225501,.T.); +#225499 = VERTEX_POINT('',#225500); +#225500 = CARTESIAN_POINT('',(144.748011,-58.7,1.585)); +#225501 = LINE('',#225502,#225503); +#225502 = CARTESIAN_POINT('',(146.15,-58.7,1.585)); +#225503 = VECTOR('',#225504,1.); +#225504 = DIRECTION('',(-1.,0.,0.)); +#225505 = ORIENTED_EDGE('',*,*,#225506,.T.); +#225506 = EDGE_CURVE('',#225499,#225507,#225509,.T.); +#225507 = VERTEX_POINT('',#225508); +#225508 = CARTESIAN_POINT('',(144.745433,-58.712961,1.585)); +#225509 = LINE('',#225510,#225511); +#225510 = CARTESIAN_POINT('',(144.748011,-58.7,1.585)); +#225511 = VECTOR('',#225512,1.); +#225512 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#225513 = ORIENTED_EDGE('',*,*,#225514,.T.); +#225514 = EDGE_CURVE('',#225507,#225515,#225517,.T.); +#225515 = VERTEX_POINT('',#225516); +#225516 = CARTESIAN_POINT('',(144.63,-58.69,1.585)); +#225517 = CIRCLE('',#225518,6.000007318647E-02); +#225518 = AXIS2_PLACEMENT_3D('',#225519,#225520,#225521); +#225519 = CARTESIAN_POINT('',(144.69000007318,-58.69000017668,1.585)); +#225520 = DIRECTION('',(-0.,0.,-1.)); +#225521 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#225522 = ORIENTED_EDGE('',*,*,#225523,.T.); +#225523 = EDGE_CURVE('',#225515,#225446,#225524,.T.); +#225524 = LINE('',#225525,#225526); +#225525 = CARTESIAN_POINT('',(144.63,-58.69,1.585)); +#225526 = VECTOR('',#225527,1.); +#225527 = DIRECTION('',(0.,1.,0.)); +#225528 = PLANE('',#225529); +#225529 = AXIS2_PLACEMENT_3D('',#225530,#225531,#225532); +#225530 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225531 = DIRECTION('',(0.,0.,1.)); +#225532 = DIRECTION('',(1.,0.,-0.)); +#225533 = SHELL_BASED_SURFACE_MODEL('',(#225534)); +#225534 = OPEN_SHELL('',(#225535)); +#225535 = ADVANCED_FACE('',(#225536),#225622,.T.); +#225536 = FACE_BOUND('',#225537,.F.); +#225537 = EDGE_LOOP('',(#225538,#225549,#225557,#225566,#225574,#225582, + #225591,#225599,#225608,#225616)); +#225538 = ORIENTED_EDGE('',*,*,#225539,.T.); +#225539 = EDGE_CURVE('',#225540,#225542,#225544,.T.); +#225540 = VERTEX_POINT('',#225541); +#225541 = CARTESIAN_POINT('',(152.409597,-58.957856,1.585)); +#225542 = VERTEX_POINT('',#225543); +#225543 = CARTESIAN_POINT('',(152.409597,-58.827856,1.585)); +#225544 = CIRCLE('',#225545,6.500000000092E-02); +#225545 = AXIS2_PLACEMENT_3D('',#225546,#225547,#225548); +#225546 = CARTESIAN_POINT('',(152.40959734486,-58.892856,1.585)); +#225547 = DIRECTION('',(0.,0.,-1.)); +#225548 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#225549 = ORIENTED_EDGE('',*,*,#225550,.T.); +#225550 = EDGE_CURVE('',#225542,#225551,#225553,.T.); +#225551 = VERTEX_POINT('',#225552); +#225552 = CARTESIAN_POINT('',(153.309597,-58.827856,1.585)); +#225553 = LINE('',#225554,#225555); +#225554 = CARTESIAN_POINT('',(152.409597,-58.827856,1.585)); +#225555 = VECTOR('',#225556,1.); +#225556 = DIRECTION('',(1.,0.,0.)); +#225557 = ORIENTED_EDGE('',*,*,#225558,.T.); +#225558 = EDGE_CURVE('',#225551,#225559,#225561,.T.); +#225559 = VERTEX_POINT('',#225560); +#225560 = CARTESIAN_POINT('',(153.341846,-58.949292,1.585)); +#225561 = CIRCLE('',#225562,6.50002119414E-02); +#225562 = AXIS2_PLACEMENT_3D('',#225563,#225564,#225565); +#225563 = CARTESIAN_POINT('',(153.30959651351,-58.89285621194,1.585)); +#225564 = DIRECTION('',(0.,0.,-1.)); +#225565 = DIRECTION('',(7.484331678206E-06,0.999999999972,0.)); +#225566 = ORIENTED_EDGE('',*,*,#225567,.T.); +#225567 = EDGE_CURVE('',#225559,#225568,#225570,.T.); +#225568 = VERTEX_POINT('',#225569); +#225569 = CARTESIAN_POINT('',(152.654359,-59.342142,1.585)); +#225570 = LINE('',#225571,#225572); +#225571 = CARTESIAN_POINT('',(153.341846,-58.949292,1.585)); +#225572 = VECTOR('',#225573,1.); +#225573 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#225574 = ORIENTED_EDGE('',*,*,#225575,.T.); +#225575 = EDGE_CURVE('',#225568,#225576,#225578,.T.); +#225576 = VERTEX_POINT('',#225577); +#225577 = CARTESIAN_POINT('',(153.309597,-59.342142,1.585)); +#225578 = LINE('',#225579,#225580); +#225579 = CARTESIAN_POINT('',(152.654359,-59.342142,1.585)); +#225580 = VECTOR('',#225581,1.); +#225581 = DIRECTION('',(1.,0.,0.)); +#225582 = ORIENTED_EDGE('',*,*,#225583,.T.); +#225583 = EDGE_CURVE('',#225576,#225584,#225586,.T.); +#225584 = VERTEX_POINT('',#225585); +#225585 = CARTESIAN_POINT('',(153.309597,-59.472142,1.585)); +#225586 = CIRCLE('',#225587,6.500000000091E-02); +#225587 = AXIS2_PLACEMENT_3D('',#225588,#225589,#225590); +#225588 = CARTESIAN_POINT('',(153.30959665513,-59.407142,1.585)); +#225589 = DIRECTION('',(0.,0.,-1.)); +#225590 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#225591 = ORIENTED_EDGE('',*,*,#225592,.T.); +#225592 = EDGE_CURVE('',#225584,#225593,#225595,.T.); +#225593 = VERTEX_POINT('',#225594); +#225594 = CARTESIAN_POINT('',(152.409597,-59.472142,1.585)); +#225595 = LINE('',#225596,#225597); +#225596 = CARTESIAN_POINT('',(153.309597,-59.472142,1.585)); +#225597 = VECTOR('',#225598,1.); +#225598 = DIRECTION('',(-1.,0.,0.)); +#225599 = ORIENTED_EDGE('',*,*,#225600,.T.); +#225600 = EDGE_CURVE('',#225593,#225601,#225603,.T.); +#225601 = VERTEX_POINT('',#225602); +#225602 = CARTESIAN_POINT('',(152.377348,-59.350706,1.585)); +#225603 = CIRCLE('',#225604,6.500021194141E-02); +#225604 = AXIS2_PLACEMENT_3D('',#225605,#225606,#225607); +#225605 = CARTESIAN_POINT('',(152.40959748648,-59.40714178806,1.585)); +#225606 = DIRECTION('',(0.,0.,-1.)); +#225607 = DIRECTION('',(-7.484332552719E-06,-0.999999999972,-0.)); +#225608 = ORIENTED_EDGE('',*,*,#225609,.T.); +#225609 = EDGE_CURVE('',#225601,#225610,#225612,.T.); +#225610 = VERTEX_POINT('',#225611); +#225611 = CARTESIAN_POINT('',(153.064835,-58.957856,1.585)); +#225612 = LINE('',#225613,#225614); +#225613 = CARTESIAN_POINT('',(152.377348,-59.350706,1.585)); +#225614 = VECTOR('',#225615,1.); +#225615 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#225616 = ORIENTED_EDGE('',*,*,#225617,.T.); +#225617 = EDGE_CURVE('',#225610,#225540,#225618,.T.); +#225618 = LINE('',#225619,#225620); +#225619 = CARTESIAN_POINT('',(153.064835,-58.957856,1.585)); +#225620 = VECTOR('',#225621,1.); +#225621 = DIRECTION('',(-1.,0.,0.)); +#225622 = PLANE('',#225623); +#225623 = AXIS2_PLACEMENT_3D('',#225624,#225625,#225626); +#225624 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225625 = DIRECTION('',(0.,0.,1.)); +#225626 = DIRECTION('',(1.,0.,-0.)); +#225627 = SHELL_BASED_SURFACE_MODEL('',(#225628)); +#225628 = OPEN_SHELL('',(#225629)); +#225629 = ADVANCED_FACE('',(#225630),#225724,.T.); +#225630 = FACE_BOUND('',#225631,.F.); +#225631 = EDGE_LOOP('',(#225632,#225643,#225651,#225660,#225668,#225676, + #225684,#225693,#225701,#225710,#225718)); +#225632 = ORIENTED_EDGE('',*,*,#225633,.T.); +#225633 = EDGE_CURVE('',#225634,#225636,#225638,.T.); +#225634 = VERTEX_POINT('',#225635); +#225635 = CARTESIAN_POINT('',(98.915113,-58.784811,1.585)); +#225636 = VERTEX_POINT('',#225637); +#225637 = CARTESIAN_POINT('',(98.929745,-58.636252,1.585)); +#225638 = CIRCLE('',#225639,7.500006711464E-02); +#225639 = AXIS2_PLACEMENT_3D('',#225640,#225641,#225642); +#225640 = CARTESIAN_POINT('',(98.929744932885,-58.71125206711,1.585)); +#225641 = DIRECTION('',(0.,0.,-1.)); +#225642 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#225643 = ORIENTED_EDGE('',*,*,#225644,.T.); +#225644 = EDGE_CURVE('',#225636,#225645,#225647,.T.); +#225645 = VERTEX_POINT('',#225646); +#225646 = CARTESIAN_POINT('',(99.457735,-58.636663,1.585)); +#225647 = LINE('',#225648,#225649); +#225648 = CARTESIAN_POINT('',(98.929745,-58.636252,1.585)); +#225649 = VECTOR('',#225650,1.); +#225650 = DIRECTION('',(0.999999697028,-7.784235979438E-04,0.)); +#225651 = ORIENTED_EDGE('',*,*,#225652,.T.); +#225652 = EDGE_CURVE('',#225645,#225653,#225655,.T.); +#225653 = VERTEX_POINT('',#225654); +#225654 = CARTESIAN_POINT('',(99.527113,-58.725884,1.585)); +#225655 = CIRCLE('',#225656,7.459912921082E-02); +#225656 = AXIS2_PLACEMENT_3D('',#225657,#225658,#225659); +#225657 = CARTESIAN_POINT('',(99.453979858538,-58.71116755685,1.585)); +#225658 = DIRECTION('',(0.,0.,-1.)); +#225659 = DIRECTION('',(5.033760449322E-02,0.998732259204,0.)); +#225660 = ORIENTED_EDGE('',*,*,#225661,.T.); +#225661 = EDGE_CURVE('',#225653,#225662,#225664,.T.); +#225662 = VERTEX_POINT('',#225663); +#225663 = CARTESIAN_POINT('',(99.512528,-58.757589,1.585)); +#225664 = LINE('',#225665,#225666); +#225665 = CARTESIAN_POINT('',(99.527113,-58.725884,1.585)); +#225666 = VECTOR('',#225667,1.); +#225667 = DIRECTION('',(-0.417922163108,-0.908482837253,0.)); +#225668 = ORIENTED_EDGE('',*,*,#225669,.T.); +#225669 = EDGE_CURVE('',#225662,#225670,#225672,.T.); +#225670 = VERTEX_POINT('',#225671); +#225671 = CARTESIAN_POINT('',(99.084055,-59.302919,1.585)); +#225672 = LINE('',#225673,#225674); +#225673 = CARTESIAN_POINT('',(99.512528,-58.757589,1.585)); +#225674 = VECTOR('',#225675,1.); +#225675 = DIRECTION('',(-0.617821042486,-0.786318739101,0.)); +#225676 = ORIENTED_EDGE('',*,*,#225677,.T.); +#225677 = EDGE_CURVE('',#225670,#225678,#225680,.T.); +#225678 = VERTEX_POINT('',#225679); +#225679 = CARTESIAN_POINT('',(99.468186,-59.30436,1.585)); +#225680 = LINE('',#225681,#225682); +#225681 = CARTESIAN_POINT('',(99.084055,-59.302919,1.585)); +#225682 = VECTOR('',#225683,1.); +#225683 = DIRECTION('',(0.999992963857,-3.751298023116E-03,0.)); +#225684 = ORIENTED_EDGE('',*,*,#225685,.T.); +#225685 = EDGE_CURVE('',#225678,#225686,#225688,.T.); +#225686 = VERTEX_POINT('',#225687); +#225687 = CARTESIAN_POINT('',(99.453554,-59.452919,1.585)); +#225688 = CIRCLE('',#225689,7.500006711464E-02); +#225689 = AXIS2_PLACEMENT_3D('',#225690,#225691,#225692); +#225690 = CARTESIAN_POINT('',(99.453554067115,-59.37791893288,1.585)); +#225691 = DIRECTION('',(0.,0.,-1.)); +#225692 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#225693 = ORIENTED_EDGE('',*,*,#225694,.T.); +#225694 = EDGE_CURVE('',#225686,#225695,#225697,.T.); +#225695 = VERTEX_POINT('',#225696); +#225696 = CARTESIAN_POINT('',(98.915113,-59.451478,1.585)); +#225697 = LINE('',#225698,#225699); +#225698 = CARTESIAN_POINT('',(99.453554,-59.452919,1.585)); +#225699 = VECTOR('',#225700,1.); +#225700 = DIRECTION('',(-0.999996418876,2.676235352805E-03,0.)); +#225701 = ORIENTED_EDGE('',*,*,#225702,.T.); +#225702 = EDGE_CURVE('',#225695,#225703,#225705,.T.); +#225703 = VERTEX_POINT('',#225704); +#225704 = CARTESIAN_POINT('',(98.870771,-59.331582,1.585)); +#225705 = CIRCLE('',#225706,7.500055394461E-02); +#225706 = AXIS2_PLACEMENT_3D('',#225707,#225708,#225709); +#225707 = CARTESIAN_POINT('',(98.929745523454,-59.37791868822,1.585)); +#225708 = DIRECTION('',(0.,0.,-1.)); +#225709 = DIRECTION('',(-0.19509887174,-0.980783579719,-0.)); +#225710 = ORIENTED_EDGE('',*,*,#225711,.T.); +#225711 = EDGE_CURVE('',#225703,#225712,#225714,.T.); +#225712 = VERTEX_POINT('',#225713); +#225713 = CARTESIAN_POINT('',(99.299244,-58.786252,1.585)); +#225714 = LINE('',#225715,#225716); +#225715 = CARTESIAN_POINT('',(98.870771,-59.331582,1.585)); +#225716 = VECTOR('',#225717,1.); +#225717 = DIRECTION('',(0.617821042486,0.786318739101,0.)); +#225718 = ORIENTED_EDGE('',*,*,#225719,.T.); +#225719 = EDGE_CURVE('',#225712,#225634,#225720,.T.); +#225720 = LINE('',#225721,#225722); +#225721 = CARTESIAN_POINT('',(99.299244,-58.786252,1.585)); +#225722 = VECTOR('',#225723,1.); +#225723 = DIRECTION('',(-0.999992963857,3.751298023116E-03,0.)); +#225724 = PLANE('',#225725); +#225725 = AXIS2_PLACEMENT_3D('',#225726,#225727,#225728); +#225726 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225727 = DIRECTION('',(0.,0.,1.)); +#225728 = DIRECTION('',(1.,0.,-0.)); +#225729 = SHELL_BASED_SURFACE_MODEL('',(#225730)); +#225730 = OPEN_SHELL('',(#225731)); +#225731 = ADVANCED_FACE('',(#225732,#225848),#225931,.T.); +#225732 = FACE_BOUND('',#225733,.F.); +#225733 = EDGE_LOOP('',(#225734,#225745,#225753,#225761,#225769,#225777, + #225785,#225793,#225801,#225809,#225817,#225825,#225833,#225842)); +#225734 = ORIENTED_EDGE('',*,*,#225735,.T.); +#225735 = EDGE_CURVE('',#225736,#225738,#225740,.T.); +#225736 = VERTEX_POINT('',#225737); +#225737 = CARTESIAN_POINT('',(97.951424,-58.363287,1.585)); +#225738 = VERTEX_POINT('',#225739); +#225739 = CARTESIAN_POINT('',(98.024983,-58.302919,1.585)); +#225740 = CIRCLE('',#225741,7.50007493898E-02); +#225741 = AXIS2_PLACEMENT_3D('',#225742,#225743,#225744); +#225742 = CARTESIAN_POINT('',(98.02498346611,-58.37791974938,1.585)); +#225743 = DIRECTION('',(0.,0.,-1.)); +#225744 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#225745 = ORIENTED_EDGE('',*,*,#225746,.T.); +#225746 = EDGE_CURVE('',#225738,#225747,#225749,.T.); +#225747 = VERTEX_POINT('',#225748); +#225748 = CARTESIAN_POINT('',(98.270483,-58.303648,1.585)); +#225749 = LINE('',#225750,#225751); +#225750 = CARTESIAN_POINT('',(98.024983,-58.302919,1.585)); +#225751 = VECTOR('',#225752,1.); +#225752 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#225753 = ORIENTED_EDGE('',*,*,#225754,.T.); +#225754 = EDGE_CURVE('',#225747,#225755,#225757,.T.); +#225755 = VERTEX_POINT('',#225756); +#225756 = CARTESIAN_POINT('',(98.447603,-58.363178,1.585)); +#225757 = LINE('',#225758,#225759); +#225758 = CARTESIAN_POINT('',(98.270483,-58.303648,1.585)); +#225759 = VECTOR('',#225760,1.); +#225760 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#225761 = ORIENTED_EDGE('',*,*,#225762,.T.); +#225762 = EDGE_CURVE('',#225755,#225763,#225765,.T.); +#225763 = VERTEX_POINT('',#225764); +#225764 = CARTESIAN_POINT('',(98.564292,-58.48094,1.585)); +#225765 = LINE('',#225766,#225767); +#225766 = CARTESIAN_POINT('',(98.447603,-58.363178,1.585)); +#225767 = VECTOR('',#225768,1.); +#225768 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#225769 = ORIENTED_EDGE('',*,*,#225770,.T.); +#225770 = EDGE_CURVE('',#225763,#225771,#225773,.T.); +#225771 = VERTEX_POINT('',#225772); +#225772 = CARTESIAN_POINT('',(98.621553,-58.597824,1.585)); +#225773 = LINE('',#225774,#225775); +#225774 = CARTESIAN_POINT('',(98.564292,-58.48094,1.585)); +#225775 = VECTOR('',#225776,1.); +#225776 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#225777 = ORIENTED_EDGE('',*,*,#225778,.T.); +#225778 = EDGE_CURVE('',#225771,#225779,#225781,.T.); +#225779 = VERTEX_POINT('',#225780); +#225780 = CARTESIAN_POINT('',(98.671411,-58.80649,1.585)); +#225781 = LINE('',#225782,#225783); +#225782 = CARTESIAN_POINT('',(98.621553,-58.597824,1.585)); +#225783 = VECTOR('',#225784,1.); +#225784 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#225785 = ORIENTED_EDGE('',*,*,#225786,.T.); +#225786 = EDGE_CURVE('',#225779,#225787,#225789,.T.); +#225787 = VERTEX_POINT('',#225788); +#225788 = CARTESIAN_POINT('',(98.669172,-58.967537,1.585)); +#225789 = LINE('',#225790,#225791); +#225790 = CARTESIAN_POINT('',(98.671411,-58.80649,1.585)); +#225791 = VECTOR('',#225792,1.); +#225792 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#225793 = ORIENTED_EDGE('',*,*,#225794,.T.); +#225794 = EDGE_CURVE('',#225787,#225795,#225797,.T.); +#225795 = VERTEX_POINT('',#225796); +#225796 = CARTESIAN_POINT('',(98.615874,-59.173364,1.585)); +#225797 = LINE('',#225798,#225799); +#225798 = CARTESIAN_POINT('',(98.669172,-58.967537,1.585)); +#225799 = VECTOR('',#225800,1.); +#225800 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#225801 = ORIENTED_EDGE('',*,*,#225802,.T.); +#225802 = EDGE_CURVE('',#225795,#225803,#225805,.T.); +#225803 = VERTEX_POINT('',#225804); +#225804 = CARTESIAN_POINT('',(98.558924,-59.282344,1.585)); +#225805 = LINE('',#225806,#225807); +#225806 = CARTESIAN_POINT('',(98.615874,-59.173364,1.585)); +#225807 = VECTOR('',#225808,1.); +#225808 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#225809 = ORIENTED_EDGE('',*,*,#225810,.T.); +#225810 = EDGE_CURVE('',#225803,#225811,#225813,.T.); +#225811 = VERTEX_POINT('',#225812); +#225812 = CARTESIAN_POINT('',(98.443077,-59.395457,1.585)); +#225813 = LINE('',#225814,#225815); +#225814 = CARTESIAN_POINT('',(98.558924,-59.282344,1.585)); +#225815 = VECTOR('',#225816,1.); +#225816 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#225817 = ORIENTED_EDGE('',*,*,#225818,.T.); +#225818 = EDGE_CURVE('',#225811,#225819,#225821,.T.); +#225819 = VERTEX_POINT('',#225820); +#225820 = CARTESIAN_POINT('',(98.270483,-59.452189,1.585)); +#225821 = LINE('',#225822,#225823); +#225822 = CARTESIAN_POINT('',(98.443077,-59.395457,1.585)); +#225823 = VECTOR('',#225824,1.); +#225824 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#225825 = ORIENTED_EDGE('',*,*,#225826,.T.); +#225826 = EDGE_CURVE('',#225819,#225827,#225829,.T.); +#225827 = VERTEX_POINT('',#225828); +#225828 = CARTESIAN_POINT('',(98.010351,-59.451478,1.585)); +#225829 = LINE('',#225830,#225831); +#225830 = CARTESIAN_POINT('',(98.270483,-59.452189,1.585)); +#225831 = VECTOR('',#225832,1.); +#225832 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#225833 = ORIENTED_EDGE('',*,*,#225834,.T.); +#225834 = EDGE_CURVE('',#225827,#225835,#225837,.T.); +#225835 = VERTEX_POINT('',#225836); +#225836 = CARTESIAN_POINT('',(97.949983,-59.377919,1.585)); +#225837 = CIRCLE('',#225838,7.500074938989E-02); +#225838 = AXIS2_PLACEMENT_3D('',#225839,#225840,#225841); +#225839 = CARTESIAN_POINT('',(98.024983749388,-59.37791853389,1.585)); +#225840 = DIRECTION('',(0.,0.,-1.)); +#225841 = DIRECTION('',(-0.195101375753,-0.980783081614,-0.)); +#225842 = ORIENTED_EDGE('',*,*,#225843,.T.); +#225843 = EDGE_CURVE('',#225835,#225736,#225844,.T.); +#225844 = LINE('',#225845,#225846); +#225845 = CARTESIAN_POINT('',(97.949983,-59.377919,1.585)); +#225846 = VECTOR('',#225847,1.); +#225847 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#225848 = FACE_BOUND('',#225849,.F.); +#225849 = EDGE_LOOP('',(#225850,#225860,#225868,#225876,#225884,#225892, + #225900,#225909,#225917,#225925)); +#225850 = ORIENTED_EDGE('',*,*,#225851,.T.); +#225851 = EDGE_CURVE('',#225852,#225854,#225856,.T.); +#225852 = VERTEX_POINT('',#225853); +#225853 = CARTESIAN_POINT('',(98.365421,-58.49109,1.585)); +#225854 = VERTEX_POINT('',#225855); +#225855 = CARTESIAN_POINT('',(98.250908,-58.452919,1.585)); +#225856 = LINE('',#225857,#225858); +#225857 = CARTESIAN_POINT('',(98.365421,-58.49109,1.585)); +#225858 = VECTOR('',#225859,1.); +#225859 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#225860 = ORIENTED_EDGE('',*,*,#225861,.T.); +#225861 = EDGE_CURVE('',#225854,#225862,#225864,.T.); +#225862 = VERTEX_POINT('',#225863); +#225863 = CARTESIAN_POINT('',(98.099983,-58.452919,1.585)); +#225864 = LINE('',#225865,#225866); +#225865 = CARTESIAN_POINT('',(98.250908,-58.452919,1.585)); +#225866 = VECTOR('',#225867,1.); +#225867 = DIRECTION('',(-1.,0.,0.)); +#225868 = ORIENTED_EDGE('',*,*,#225869,.T.); +#225869 = EDGE_CURVE('',#225862,#225870,#225872,.T.); +#225870 = VERTEX_POINT('',#225871); +#225871 = CARTESIAN_POINT('',(98.099983,-59.302919,1.585)); +#225872 = LINE('',#225873,#225874); +#225873 = CARTESIAN_POINT('',(98.099983,-58.452919,1.585)); +#225874 = VECTOR('',#225875,1.); +#225875 = DIRECTION('',(0.,-1.,0.)); +#225876 = ORIENTED_EDGE('',*,*,#225877,.T.); +#225877 = EDGE_CURVE('',#225870,#225878,#225880,.T.); +#225878 = VERTEX_POINT('',#225879); +#225879 = CARTESIAN_POINT('',(98.250908,-59.302919,1.585)); +#225880 = LINE('',#225881,#225882); +#225881 = CARTESIAN_POINT('',(98.099983,-59.302919,1.585)); +#225882 = VECTOR('',#225883,1.); +#225883 = DIRECTION('',(1.,0.,0.)); +#225884 = ORIENTED_EDGE('',*,*,#225885,.T.); +#225885 = EDGE_CURVE('',#225878,#225886,#225888,.T.); +#225886 = VERTEX_POINT('',#225887); +#225887 = CARTESIAN_POINT('',(98.365421,-59.264747,1.585)); +#225888 = LINE('',#225889,#225890); +#225889 = CARTESIAN_POINT('',(98.250908,-59.302919,1.585)); +#225890 = VECTOR('',#225891,1.); +#225891 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#225892 = ORIENTED_EDGE('',*,*,#225893,.T.); +#225893 = EDGE_CURVE('',#225886,#225894,#225896,.T.); +#225894 = VERTEX_POINT('',#225895); +#225895 = CARTESIAN_POINT('',(98.439533,-59.190634,1.585)); +#225896 = LINE('',#225897,#225898); +#225897 = CARTESIAN_POINT('',(98.365421,-59.264747,1.585)); +#225898 = VECTOR('',#225899,1.); +#225899 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#225900 = ORIENTED_EDGE('',*,*,#225901,.T.); +#225901 = EDGE_CURVE('',#225894,#225902,#225904,.T.); +#225902 = VERTEX_POINT('',#225903); +#225903 = CARTESIAN_POINT('',(98.521411,-58.815724,1.585)); +#225904 = CIRCLE('',#225905,0.611719141131); +#225905 = AXIS2_PLACEMENT_3D('',#225906,#225907,#225908); +#225906 = CARTESIAN_POINT('',(97.912998962242,-58.87924643649,1.585)); +#225907 = DIRECTION('',(0.,0.,1.)); +#225908 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#225909 = ORIENTED_EDGE('',*,*,#225910,.T.); +#225910 = EDGE_CURVE('',#225902,#225911,#225913,.T.); +#225911 = VERTEX_POINT('',#225912); +#225912 = CARTESIAN_POINT('',(98.478027,-58.64219,1.585)); +#225913 = LINE('',#225914,#225915); +#225914 = CARTESIAN_POINT('',(98.521411,-58.815724,1.585)); +#225915 = VECTOR('',#225916,1.); +#225916 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#225917 = ORIENTED_EDGE('',*,*,#225918,.T.); +#225918 = EDGE_CURVE('',#225911,#225919,#225921,.T.); +#225919 = VERTEX_POINT('',#225920); +#225920 = CARTESIAN_POINT('',(98.439534,-58.565203,1.585)); +#225921 = LINE('',#225922,#225923); +#225922 = CARTESIAN_POINT('',(98.478027,-58.64219,1.585)); +#225923 = VECTOR('',#225924,1.); +#225924 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#225925 = ORIENTED_EDGE('',*,*,#225926,.T.); +#225926 = EDGE_CURVE('',#225919,#225852,#225927,.T.); +#225927 = LINE('',#225928,#225929); +#225928 = CARTESIAN_POINT('',(98.439534,-58.565203,1.585)); +#225929 = VECTOR('',#225930,1.); +#225930 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#225931 = PLANE('',#225932); +#225932 = AXIS2_PLACEMENT_3D('',#225933,#225934,#225935); +#225933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#225934 = DIRECTION('',(0.,0.,1.)); +#225935 = DIRECTION('',(1.,0.,-0.)); +#225936 = SHELL_BASED_SURFACE_MODEL('',(#225937)); +#225937 = OPEN_SHELL('',(#225938)); +#225938 = ADVANCED_FACE('',(#225939),#226187,.T.); +#225939 = FACE_BOUND('',#225940,.F.); +#225940 = EDGE_LOOP('',(#225941,#225951,#225959,#225967,#225975,#225984, + #225992,#226000,#226008,#226016,#226025,#226033,#226041,#226049, + #226058,#226066,#226074,#226082,#226091,#226099,#226108,#226116, + #226124,#226132,#226141,#226149,#226157,#226165,#226173,#226181)); +#225941 = ORIENTED_EDGE('',*,*,#225942,.T.); +#225942 = EDGE_CURVE('',#225943,#225945,#225947,.T.); +#225943 = VERTEX_POINT('',#225944); +#225944 = CARTESIAN_POINT('',(99.824374,-58.473492,1.585)); +#225945 = VERTEX_POINT('',#225946); +#225946 = CARTESIAN_POINT('',(99.940221,-58.360381,1.585)); +#225947 = LINE('',#225948,#225949); +#225948 = CARTESIAN_POINT('',(99.824374,-58.473492,1.585)); +#225949 = VECTOR('',#225950,1.); +#225950 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#225951 = ORIENTED_EDGE('',*,*,#225952,.T.); +#225952 = EDGE_CURVE('',#225945,#225953,#225955,.T.); +#225953 = VERTEX_POINT('',#225954); +#225954 = CARTESIAN_POINT('',(100.112814,-58.303648,1.585)); +#225955 = LINE('',#225956,#225957); +#225956 = CARTESIAN_POINT('',(99.940221,-58.360381,1.585)); +#225957 = VECTOR('',#225958,1.); +#225958 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#225959 = ORIENTED_EDGE('',*,*,#225960,.T.); +#225960 = EDGE_CURVE('',#225953,#225961,#225963,.T.); +#225961 = VERTEX_POINT('',#225962); +#225962 = CARTESIAN_POINT('',(100.27771,-58.30436,1.585)); +#225963 = LINE('',#225964,#225965); +#225964 = CARTESIAN_POINT('',(100.112814,-58.303648,1.585)); +#225965 = VECTOR('',#225966,1.); +#225966 = DIRECTION('',(0.999990678116,-4.31783283293E-03,0.)); +#225967 = ORIENTED_EDGE('',*,*,#225968,.T.); +#225968 = EDGE_CURVE('',#225961,#225969,#225971,.T.); +#225969 = VERTEX_POINT('',#225970); +#225970 = CARTESIAN_POINT('',(100.4043,-58.366288,1.585)); +#225971 = LINE('',#225972,#225973); +#225972 = CARTESIAN_POINT('',(100.27771,-58.30436,1.585)); +#225973 = VECTOR('',#225974,1.); +#225974 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#225975 = ORIENTED_EDGE('',*,*,#225976,.T.); +#225976 = EDGE_CURVE('',#225969,#225977,#225979,.T.); +#225977 = VERTEX_POINT('',#225978); +#225978 = CARTESIAN_POINT('',(100.324775,-58.49262,1.585)); +#225979 = CIRCLE('',#225980,7.500029440362E-02); +#225980 = AXIS2_PLACEMENT_3D('',#225981,#225982,#225983); +#225981 = CARTESIAN_POINT('',(100.35831605397,-58.42553764867,1.585)); +#225982 = DIRECTION('',(0.,0.,-1.)); +#225983 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#225984 = ORIENTED_EDGE('',*,*,#225985,.T.); +#225985 = EDGE_CURVE('',#225977,#225986,#225988,.T.); +#225986 = VERTEX_POINT('',#225987); +#225987 = CARTESIAN_POINT('',(100.245373,-58.452919,1.585)); +#225988 = LINE('',#225989,#225990); +#225989 = CARTESIAN_POINT('',(100.324775,-58.49262,1.585)); +#225990 = VECTOR('',#225991,1.); +#225991 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#225992 = ORIENTED_EDGE('',*,*,#225993,.T.); +#225993 = EDGE_CURVE('',#225986,#225994,#225996,.T.); +#225994 = VERTEX_POINT('',#225995); +#225995 = CARTESIAN_POINT('',(100.132391,-58.452919,1.585)); +#225996 = LINE('',#225997,#225998); +#225997 = CARTESIAN_POINT('',(100.245373,-58.452919,1.585)); +#225998 = VECTOR('',#225999,1.); +#225999 = DIRECTION('',(-1.,0.,0.)); +#226000 = ORIENTED_EDGE('',*,*,#226001,.T.); +#226001 = EDGE_CURVE('',#225994,#226002,#226004,.T.); +#226002 = VERTEX_POINT('',#226003); +#226003 = CARTESIAN_POINT('',(100.017878,-58.49109,1.585)); +#226004 = LINE('',#226005,#226006); +#226005 = CARTESIAN_POINT('',(100.132391,-58.452919,1.585)); +#226006 = VECTOR('',#226007,1.); +#226007 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#226008 = ORIENTED_EDGE('',*,*,#226009,.T.); +#226009 = EDGE_CURVE('',#226002,#226010,#226012,.T.); +#226010 = VERTEX_POINT('',#226011); +#226011 = CARTESIAN_POINT('',(99.943765,-58.565203,1.585)); +#226012 = LINE('',#226013,#226014); +#226013 = CARTESIAN_POINT('',(100.017878,-58.49109,1.585)); +#226014 = VECTOR('',#226015,1.); +#226015 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#226016 = ORIENTED_EDGE('',*,*,#226017,.T.); +#226017 = EDGE_CURVE('',#226010,#226018,#226020,.T.); +#226018 = VERTEX_POINT('',#226019); +#226019 = CARTESIAN_POINT('',(99.861888,-58.940113,1.585)); +#226020 = CIRCLE('',#226021,0.611712714363); +#226021 = AXIS2_PLACEMENT_3D('',#226022,#226023,#226024); +#226022 = CARTESIAN_POINT('',(100.47029327521,-58.8765876822,1.585)); +#226023 = DIRECTION('',(0.,0.,1.)); +#226024 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#226025 = ORIENTED_EDGE('',*,*,#226026,.T.); +#226026 = EDGE_CURVE('',#226018,#226027,#226029,.T.); +#226027 = VERTEX_POINT('',#226028); +#226028 = CARTESIAN_POINT('',(99.905271,-59.113647,1.585)); +#226029 = LINE('',#226030,#226031); +#226030 = CARTESIAN_POINT('',(99.861888,-58.940113,1.585)); +#226031 = VECTOR('',#226032,1.); +#226032 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#226033 = ORIENTED_EDGE('',*,*,#226034,.T.); +#226034 = EDGE_CURVE('',#226027,#226035,#226037,.T.); +#226035 = VERTEX_POINT('',#226036); +#226036 = CARTESIAN_POINT('',(99.943765,-59.190634,1.585)); +#226037 = LINE('',#226038,#226039); +#226038 = CARTESIAN_POINT('',(99.905271,-59.113647,1.585)); +#226039 = VECTOR('',#226040,1.); +#226040 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#226041 = ORIENTED_EDGE('',*,*,#226042,.T.); +#226042 = EDGE_CURVE('',#226035,#226043,#226045,.T.); +#226043 = VERTEX_POINT('',#226044); +#226044 = CARTESIAN_POINT('',(100.017878,-59.264748,1.585)); +#226045 = LINE('',#226046,#226047); +#226046 = CARTESIAN_POINT('',(99.943765,-59.190634,1.585)); +#226047 = VECTOR('',#226048,1.); +#226048 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#226049 = ORIENTED_EDGE('',*,*,#226050,.T.); +#226050 = EDGE_CURVE('',#226043,#226051,#226053,.T.); +#226051 = VERTEX_POINT('',#226052); +#226052 = CARTESIAN_POINT('',(100.317802,-59.264747,1.585)); +#226053 = CIRCLE('',#226054,0.299305962385); +#226054 = AXIS2_PLACEMENT_3D('',#226055,#226056,#226057); +#226055 = CARTESIAN_POINT('',(100.16783913635,-59.00571959093,1.585)); +#226056 = DIRECTION('',(0.,0.,1.)); +#226057 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#226058 = ORIENTED_EDGE('',*,*,#226059,.T.); +#226059 = EDGE_CURVE('',#226051,#226060,#226062,.T.); +#226060 = VERTEX_POINT('',#226061); +#226061 = CARTESIAN_POINT('',(100.330935,-59.251614,1.585)); +#226062 = LINE('',#226063,#226064); +#226063 = CARTESIAN_POINT('',(100.317802,-59.264747,1.585)); +#226064 = VECTOR('',#226065,1.); +#226065 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#226066 = ORIENTED_EDGE('',*,*,#226067,.T.); +#226067 = EDGE_CURVE('',#226060,#226068,#226070,.T.); +#226068 = VERTEX_POINT('',#226069); +#226069 = CARTESIAN_POINT('',(100.330935,-59.024347,1.585)); +#226070 = LINE('',#226071,#226072); +#226071 = CARTESIAN_POINT('',(100.330935,-59.251614,1.585)); +#226072 = VECTOR('',#226073,1.); +#226073 = DIRECTION('',(0.,1.,0.)); +#226074 = ORIENTED_EDGE('',*,*,#226075,.T.); +#226075 = EDGE_CURVE('',#226068,#226076,#226078,.T.); +#226076 = VERTEX_POINT('',#226077); +#226077 = CARTESIAN_POINT('',(100.200827,-59.022906,1.585)); +#226078 = LINE('',#226079,#226080); +#226079 = CARTESIAN_POINT('',(100.330935,-59.024347,1.585)); +#226080 = VECTOR('',#226081,1.); +#226081 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#226082 = ORIENTED_EDGE('',*,*,#226083,.T.); +#226083 = EDGE_CURVE('',#226076,#226084,#226086,.T.); +#226084 = VERTEX_POINT('',#226085); +#226085 = CARTESIAN_POINT('',(100.215459,-58.874347,1.585)); +#226086 = CIRCLE('',#226087,7.500006711464E-02); +#226087 = AXIS2_PLACEMENT_3D('',#226088,#226089,#226090); +#226088 = CARTESIAN_POINT('',(100.21545893288,-58.94934706711,1.585)); +#226089 = DIRECTION('',(0.,0.,-1.)); +#226090 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#226091 = ORIENTED_EDGE('',*,*,#226092,.T.); +#226092 = EDGE_CURVE('',#226084,#226093,#226095,.T.); +#226093 = VERTEX_POINT('',#226094); +#226094 = CARTESIAN_POINT('',(100.420567,-58.875788,1.585)); +#226095 = LINE('',#226096,#226097); +#226096 = CARTESIAN_POINT('',(100.215459,-58.874347,1.585)); +#226097 = VECTOR('',#226098,1.); +#226098 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#226099 = ORIENTED_EDGE('',*,*,#226100,.T.); +#226100 = EDGE_CURVE('',#226093,#226101,#226103,.T.); +#226101 = VERTEX_POINT('',#226102); +#226102 = CARTESIAN_POINT('',(100.480935,-58.949347,1.585)); +#226103 = CIRCLE('',#226104,7.500074938984E-02); +#226104 = AXIS2_PLACEMENT_3D('',#226105,#226106,#226107); +#226105 = CARTESIAN_POINT('',(100.40593425061,-58.94934746611,1.585)); +#226106 = DIRECTION('',(0.,0.,-1.)); +#226107 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#226108 = ORIENTED_EDGE('',*,*,#226109,.T.); +#226109 = EDGE_CURVE('',#226101,#226110,#226112,.T.); +#226110 = VERTEX_POINT('',#226111); +#226111 = CARTESIAN_POINT('',(100.479494,-59.297312,1.585)); +#226112 = LINE('',#226113,#226114); +#226113 = CARTESIAN_POINT('',(100.480935,-58.949347,1.585)); +#226114 = VECTOR('',#226115,1.); +#226115 = DIRECTION('',(-4.141185589904E-03,-0.999991425254,0.)); +#226116 = ORIENTED_EDGE('',*,*,#226117,.T.); +#226117 = EDGE_CURVE('',#226110,#226118,#226120,.T.); +#226118 = VERTEX_POINT('',#226119); +#226119 = CARTESIAN_POINT('',(100.458968,-59.335713,1.585)); +#226120 = LINE('',#226121,#226122); +#226121 = CARTESIAN_POINT('',(100.479494,-59.297312,1.585)); +#226122 = VECTOR('',#226123,1.); +#226123 = DIRECTION('',(-0.471400985779,-0.881918993223,0.)); +#226124 = ORIENTED_EDGE('',*,*,#226125,.T.); +#226125 = EDGE_CURVE('',#226118,#226126,#226128,.T.); +#226126 = VERTEX_POINT('',#226127); +#226127 = CARTESIAN_POINT('',(100.395458,-59.395457,1.585)); +#226128 = LINE('',#226129,#226130); +#226129 = CARTESIAN_POINT('',(100.458968,-59.335713,1.585)); +#226130 = VECTOR('',#226131,1.); +#226131 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#226132 = ORIENTED_EDGE('',*,*,#226133,.T.); +#226133 = EDGE_CURVE('',#226126,#226134,#226136,.T.); +#226134 = VERTEX_POINT('',#226135); +#226135 = CARTESIAN_POINT('',(99.935696,-59.392661,1.585)); +#226136 = CIRCLE('',#226137,0.461067828848); +#226137 = AXIS2_PLACEMENT_3D('',#226138,#226139,#226140); +#226138 = CARTESIAN_POINT('',(100.16800751268,-58.99439613352,1.585)); +#226139 = DIRECTION('',(-0.,0.,-1.)); +#226140 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#226141 = ORIENTED_EDGE('',*,*,#226142,.T.); +#226142 = EDGE_CURVE('',#226134,#226143,#226145,.T.); +#226143 = VERTEX_POINT('',#226144); +#226144 = CARTESIAN_POINT('',(99.819007,-59.274898,1.585)); +#226145 = LINE('',#226146,#226147); +#226146 = CARTESIAN_POINT('',(99.935696,-59.392661,1.585)); +#226147 = VECTOR('',#226148,1.); +#226148 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#226149 = ORIENTED_EDGE('',*,*,#226150,.T.); +#226150 = EDGE_CURVE('',#226143,#226151,#226153,.T.); +#226151 = VERTEX_POINT('',#226152); +#226152 = CARTESIAN_POINT('',(99.761746,-59.158013,1.585)); +#226153 = LINE('',#226154,#226155); +#226154 = CARTESIAN_POINT('',(99.819007,-59.274898,1.585)); +#226155 = VECTOR('',#226156,1.); +#226156 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#226157 = ORIENTED_EDGE('',*,*,#226158,.T.); +#226158 = EDGE_CURVE('',#226151,#226159,#226161,.T.); +#226159 = VERTEX_POINT('',#226160); +#226160 = CARTESIAN_POINT('',(99.711888,-58.949347,1.585)); +#226161 = LINE('',#226162,#226163); +#226162 = CARTESIAN_POINT('',(99.761746,-59.158013,1.585)); +#226163 = VECTOR('',#226164,1.); +#226164 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#226165 = ORIENTED_EDGE('',*,*,#226166,.T.); +#226166 = EDGE_CURVE('',#226159,#226167,#226169,.T.); +#226167 = VERTEX_POINT('',#226168); +#226168 = CARTESIAN_POINT('',(99.714127,-58.7883,1.585)); +#226169 = LINE('',#226170,#226171); +#226170 = CARTESIAN_POINT('',(99.711888,-58.949347,1.585)); +#226171 = VECTOR('',#226172,1.); +#226172 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#226173 = ORIENTED_EDGE('',*,*,#226174,.T.); +#226174 = EDGE_CURVE('',#226167,#226175,#226177,.T.); +#226175 = VERTEX_POINT('',#226176); +#226176 = CARTESIAN_POINT('',(99.767425,-58.582473,1.585)); +#226177 = LINE('',#226178,#226179); +#226178 = CARTESIAN_POINT('',(99.714127,-58.7883,1.585)); +#226179 = VECTOR('',#226180,1.); +#226180 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#226181 = ORIENTED_EDGE('',*,*,#226182,.T.); +#226182 = EDGE_CURVE('',#226175,#225943,#226183,.T.); +#226183 = LINE('',#226184,#226185); +#226184 = CARTESIAN_POINT('',(99.767425,-58.582473,1.585)); +#226185 = VECTOR('',#226186,1.); +#226186 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#226187 = PLANE('',#226188); +#226188 = AXIS2_PLACEMENT_3D('',#226189,#226190,#226191); +#226189 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226190 = DIRECTION('',(0.,0.,1.)); +#226191 = DIRECTION('',(1.,0.,-0.)); +#226192 = SHELL_BASED_SURFACE_MODEL('',(#226193)); +#226193 = OPEN_SHELL('',(#226194)); +#226194 = ADVANCED_FACE('',(#226195),#226397,.T.); +#226195 = FACE_BOUND('',#226196,.F.); +#226196 = EDGE_LOOP('',(#226197,#226208,#226216,#226224,#226232,#226240, + #226249,#226257,#226266,#226274,#226283,#226291,#226300,#226308, + #226317,#226325,#226334,#226342,#226350,#226358,#226367,#226375, + #226383,#226391)); +#226197 = ORIENTED_EDGE('',*,*,#226198,.T.); +#226198 = EDGE_CURVE('',#226199,#226201,#226203,.T.); +#226199 = VERTEX_POINT('',#226200); +#226200 = CARTESIAN_POINT('',(155.340369,-58.935343,1.585)); +#226201 = VERTEX_POINT('',#226202); +#226202 = CARTESIAN_POINT('',(155.559225,-58.716486,1.585)); +#226203 = CIRCLE('',#226204,0.308109459502); +#226204 = AXIS2_PLACEMENT_3D('',#226205,#226206,#226207); +#226205 = CARTESIAN_POINT('',(155.63818845359,-59.01430509279,1.585)); +#226206 = DIRECTION('',(0.,0.,-1.)); +#226207 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#226208 = ORIENTED_EDGE('',*,*,#226209,.T.); +#226209 = EDGE_CURVE('',#226201,#226210,#226212,.T.); +#226210 = VERTEX_POINT('',#226211); +#226211 = CARTESIAN_POINT('',(155.791361,-58.714206,1.585)); +#226212 = LINE('',#226213,#226214); +#226213 = CARTESIAN_POINT('',(155.559225,-58.716486,1.585)); +#226214 = VECTOR('',#226215,1.); +#226215 = DIRECTION('',(0.999951769331,9.821354869909E-03,0.)); +#226216 = ORIENTED_EDGE('',*,*,#226217,.T.); +#226217 = EDGE_CURVE('',#226210,#226218,#226220,.T.); +#226218 = VERTEX_POINT('',#226219); +#226219 = CARTESIAN_POINT('',(155.817237,-58.720433,1.585)); +#226220 = LINE('',#226221,#226222); +#226221 = CARTESIAN_POINT('',(155.791361,-58.714206,1.585)); +#226222 = VECTOR('',#226223,1.); +#226223 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#226224 = ORIENTED_EDGE('',*,*,#226225,.T.); +#226225 = EDGE_CURVE('',#226218,#226226,#226228,.T.); +#226226 = VERTEX_POINT('',#226227); +#226227 = CARTESIAN_POINT('',(155.919844,-58.775466,1.585)); +#226228 = LINE('',#226229,#226230); +#226229 = CARTESIAN_POINT('',(155.817237,-58.720433,1.585)); +#226230 = VECTOR('',#226231,1.); +#226231 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#226232 = ORIENTED_EDGE('',*,*,#226233,.T.); +#226233 = EDGE_CURVE('',#226226,#226234,#226236,.T.); +#226234 = VERTEX_POINT('',#226235); +#226235 = CARTESIAN_POINT('',(155.974878,-58.835217,1.585)); +#226236 = LINE('',#226237,#226238); +#226237 = CARTESIAN_POINT('',(155.919844,-58.775466,1.585)); +#226238 = VECTOR('',#226239,1.); +#226239 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#226240 = ORIENTED_EDGE('',*,*,#226241,.T.); +#226241 = EDGE_CURVE('',#226234,#226242,#226244,.T.); +#226242 = VERTEX_POINT('',#226243); +#226243 = CARTESIAN_POINT('',(155.968491,-59.287297,1.585)); +#226244 = CIRCLE('',#226245,0.407997408492); +#226245 = AXIS2_PLACEMENT_3D('',#226246,#226247,#226248); +#226246 = CARTESIAN_POINT('',(155.6320750414,-59.05645898723,1.585)); +#226247 = DIRECTION('',(0.,0.,-1.)); +#226248 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#226249 = ORIENTED_EDGE('',*,*,#226250,.T.); +#226250 = EDGE_CURVE('',#226242,#226251,#226253,.T.); +#226251 = VERTEX_POINT('',#226252); +#226252 = CARTESIAN_POINT('',(155.919843,-59.338819,1.585)); +#226253 = LINE('',#226254,#226255); +#226254 = CARTESIAN_POINT('',(155.968491,-59.287297,1.585)); +#226255 = VECTOR('',#226256,1.); +#226256 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#226257 = ORIENTED_EDGE('',*,*,#226258,.T.); +#226258 = EDGE_CURVE('',#226251,#226259,#226261,.T.); +#226259 = VERTEX_POINT('',#226260); +#226260 = CARTESIAN_POINT('',(155.827921,-59.246895,1.585)); +#226261 = CIRCLE('',#226262,6.499937665135E-02); +#226262 = AXIS2_PLACEMENT_3D('',#226263,#226264,#226265); +#226263 = CARTESIAN_POINT('',(155.87388218097,-59.29285681902,1.585)); +#226264 = DIRECTION('',(-0.,0.,-1.)); +#226265 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#226266 = ORIENTED_EDGE('',*,*,#226267,.T.); +#226267 = EDGE_CURVE('',#226259,#226268,#226270,.T.); +#226268 = VERTEX_POINT('',#226269); +#226269 = CARTESIAN_POINT('',(155.863319,-59.211497,1.585)); +#226270 = LINE('',#226271,#226272); +#226271 = CARTESIAN_POINT('',(155.827921,-59.246895,1.585)); +#226272 = VECTOR('',#226273,1.); +#226273 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#226274 = ORIENTED_EDGE('',*,*,#226275,.T.); +#226275 = EDGE_CURVE('',#226268,#226276,#226278,.T.); +#226276 = VERTEX_POINT('',#226277); +#226277 = CARTESIAN_POINT('',(155.863319,-58.902789,1.585)); +#226278 = CIRCLE('',#226279,0.277419178293); +#226279 = AXIS2_PLACEMENT_3D('',#226280,#226281,#226282); +#226280 = CARTESIAN_POINT('',(155.632806,-59.057143,1.585)); +#226281 = DIRECTION('',(0.,-0.,1.)); +#226282 = DIRECTION('',(0.830919482272,-0.556392679661,-0.)); +#226283 = ORIENTED_EDGE('',*,*,#226284,.T.); +#226284 = EDGE_CURVE('',#226276,#226285,#226287,.T.); +#226285 = VERTEX_POINT('',#226286); +#226286 = CARTESIAN_POINT('',(155.835379,-58.874849,1.585)); +#226287 = LINE('',#226288,#226289); +#226288 = CARTESIAN_POINT('',(155.863319,-58.902789,1.585)); +#226289 = VECTOR('',#226290,1.); +#226290 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#226291 = ORIENTED_EDGE('',*,*,#226292,.T.); +#226292 = EDGE_CURVE('',#226285,#226293,#226295,.T.); +#226293 = VERTEX_POINT('',#226294); +#226294 = CARTESIAN_POINT('',(155.526671,-58.874849,1.585)); +#226295 = CIRCLE('',#226296,0.277419178293); +#226296 = AXIS2_PLACEMENT_3D('',#226297,#226298,#226299); +#226297 = CARTESIAN_POINT('',(155.681025,-59.105362,1.585)); +#226298 = DIRECTION('',(0.,0.,1.)); +#226299 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#226300 = ORIENTED_EDGE('',*,*,#226301,.T.); +#226301 = EDGE_CURVE('',#226293,#226302,#226304,.T.); +#226302 = VERTEX_POINT('',#226303); +#226303 = CARTESIAN_POINT('',(155.498733,-58.902787,1.585)); +#226304 = LINE('',#226305,#226306); +#226305 = CARTESIAN_POINT('',(155.526671,-58.874849,1.585)); +#226306 = VECTOR('',#226307,1.); +#226307 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#226308 = ORIENTED_EDGE('',*,*,#226309,.T.); +#226309 = EDGE_CURVE('',#226302,#226310,#226312,.T.); +#226310 = VERTEX_POINT('',#226311); +#226311 = CARTESIAN_POINT('',(155.498732,-59.211497,1.585)); +#226312 = CIRCLE('',#226313,0.277420975587); +#226313 = AXIS2_PLACEMENT_3D('',#226314,#226315,#226316); +#226314 = CARTESIAN_POINT('',(155.7292469934,-59.0571427467,1.585)); +#226315 = DIRECTION('',(0.,0.,1.)); +#226316 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#226317 = ORIENTED_EDGE('',*,*,#226318,.T.); +#226318 = EDGE_CURVE('',#226310,#226319,#226321,.T.); +#226319 = VERTEX_POINT('',#226320); +#226320 = CARTESIAN_POINT('',(155.53413,-59.246895,1.585)); +#226321 = LINE('',#226322,#226323); +#226322 = CARTESIAN_POINT('',(155.498732,-59.211497,1.585)); +#226323 = VECTOR('',#226324,1.); +#226324 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#226325 = ORIENTED_EDGE('',*,*,#226326,.T.); +#226326 = EDGE_CURVE('',#226319,#226327,#226329,.T.); +#226327 = VERTEX_POINT('',#226328); +#226328 = CARTESIAN_POINT('',(155.481701,-59.357534,1.585)); +#226329 = CIRCLE('',#226330,6.499980032117E-02); +#226330 = AXIS2_PLACEMENT_3D('',#226331,#226332,#226333); +#226331 = CARTESIAN_POINT('',(155.48816812219,-59.29285672136,1.585)); +#226332 = DIRECTION('',(0.,0.,-1.)); +#226333 = DIRECTION('',(0.707107984622,0.707105577749,0.)); +#226334 = ORIENTED_EDGE('',*,*,#226335,.T.); +#226335 = EDGE_CURVE('',#226327,#226336,#226338,.T.); +#226336 = VERTEX_POINT('',#226337); +#226337 = CARTESIAN_POINT('',(155.034723,-59.310052,1.585)); +#226338 = LINE('',#226339,#226340); +#226339 = CARTESIAN_POINT('',(155.481701,-59.357534,1.585)); +#226340 = VECTOR('',#226341,1.); +#226341 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#226342 = ORIENTED_EDGE('',*,*,#226343,.T.); +#226343 = EDGE_CURVE('',#226336,#226344,#226346,.T.); +#226344 = VERTEX_POINT('',#226345); +#226345 = CARTESIAN_POINT('',(154.997368,-59.268775,1.585)); +#226346 = LINE('',#226347,#226348); +#226347 = CARTESIAN_POINT('',(155.034723,-59.310052,1.585)); +#226348 = VECTOR('',#226349,1.); +#226349 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#226350 = ORIENTED_EDGE('',*,*,#226351,.T.); +#226351 = EDGE_CURVE('',#226344,#226352,#226354,.T.); +#226352 = VERTEX_POINT('',#226353); +#226353 = CARTESIAN_POINT('',(154.994597,-58.821428,1.585)); +#226354 = LINE('',#226355,#226356); +#226355 = CARTESIAN_POINT('',(154.997368,-59.268775,1.585)); +#226356 = VECTOR('',#226357,1.); +#226357 = DIRECTION('',(-6.194177765462E-03,0.999980815897,0.)); +#226358 = ORIENTED_EDGE('',*,*,#226359,.T.); +#226359 = EDGE_CURVE('',#226352,#226360,#226362,.T.); +#226360 = VERTEX_POINT('',#226361); +#226361 = CARTESIAN_POINT('',(155.124597,-58.821428,1.585)); +#226362 = CIRCLE('',#226363,6.500000000091E-02); +#226363 = AXIS2_PLACEMENT_3D('',#226364,#226365,#226366); +#226364 = CARTESIAN_POINT('',(155.059597,-58.82142834486,1.585)); +#226365 = DIRECTION('',(0.,0.,-1.)); +#226366 = DIRECTION('',(-0.999999999986,5.305658244297E-06,0.)); +#226367 = ORIENTED_EDGE('',*,*,#226368,.T.); +#226368 = EDGE_CURVE('',#226360,#226369,#226371,.T.); +#226369 = VERTEX_POINT('',#226370); +#226370 = CARTESIAN_POINT('',(155.124597,-59.191176,1.585)); +#226371 = LINE('',#226372,#226373); +#226372 = CARTESIAN_POINT('',(155.124597,-58.821428,1.585)); +#226373 = VECTOR('',#226374,1.); +#226374 = DIRECTION('',(0.,-1.,0.)); +#226375 = ORIENTED_EDGE('',*,*,#226376,.T.); +#226376 = EDGE_CURVE('',#226369,#226377,#226379,.T.); +#226377 = VERTEX_POINT('',#226378); +#226378 = CARTESIAN_POINT('',(155.354733,-59.214189,1.585)); +#226379 = LINE('',#226380,#226381); +#226380 = CARTESIAN_POINT('',(155.124597,-59.191176,1.585)); +#226381 = VECTOR('',#226382,1.); +#226382 = DIRECTION('',(0.99503744706,-9.950115049007E-02,0.)); +#226383 = ORIENTED_EDGE('',*,*,#226384,.T.); +#226384 = EDGE_CURVE('',#226377,#226385,#226387,.T.); +#226385 = VERTEX_POINT('',#226386); +#226386 = CARTESIAN_POINT('',(155.337618,-59.168894,1.585)); +#226387 = LINE('',#226388,#226389); +#226388 = CARTESIAN_POINT('',(155.354733,-59.214189,1.585)); +#226389 = VECTOR('',#226390,1.); +#226390 = DIRECTION('',(-0.353464827548,0.935447815587,0.)); +#226391 = ORIENTED_EDGE('',*,*,#226392,.T.); +#226392 = EDGE_CURVE('',#226385,#226199,#226393,.T.); +#226393 = LINE('',#226394,#226395); +#226394 = CARTESIAN_POINT('',(155.337618,-59.168894,1.585)); +#226395 = VECTOR('',#226396,1.); +#226396 = DIRECTION('',(1.177819480953E-02,0.999930634658,0.)); +#226397 = PLANE('',#226398); +#226398 = AXIS2_PLACEMENT_3D('',#226399,#226400,#226401); +#226399 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226400 = DIRECTION('',(0.,0.,1.)); +#226401 = DIRECTION('',(1.,0.,-0.)); +#226402 = SHELL_BASED_SURFACE_MODEL('',(#226403)); +#226403 = OPEN_SHELL('',(#226404)); +#226404 = ADVANCED_FACE('',(#226405),#226539,.T.); +#226405 = FACE_BOUND('',#226406,.F.); +#226406 = EDGE_LOOP('',(#226407,#226417,#226425,#226434,#226442,#226450, + #226459,#226467,#226476,#226484,#226492,#226500,#226508,#226517, + #226525,#226533)); +#226407 = ORIENTED_EDGE('',*,*,#226408,.T.); +#226408 = EDGE_CURVE('',#226409,#226411,#226413,.T.); +#226409 = VERTEX_POINT('',#226410); +#226410 = CARTESIAN_POINT('',(91.162371,-58.224941,1.585)); +#226411 = VERTEX_POINT('',#226412); +#226412 = CARTESIAN_POINT('',(91.200827,-58.20436,1.585)); +#226413 = LINE('',#226414,#226415); +#226414 = CARTESIAN_POINT('',(91.162371,-58.224941,1.585)); +#226415 = VECTOR('',#226416,1.); +#226416 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#226417 = ORIENTED_EDGE('',*,*,#226418,.T.); +#226418 = EDGE_CURVE('',#226411,#226419,#226421,.T.); +#226419 = VERTEX_POINT('',#226420); +#226420 = CARTESIAN_POINT('',(91.222664,-58.20436,1.585)); +#226421 = LINE('',#226422,#226423); +#226422 = CARTESIAN_POINT('',(91.200827,-58.20436,1.585)); +#226423 = VECTOR('',#226424,1.); +#226424 = DIRECTION('',(1.,0.,0.)); +#226425 = ORIENTED_EDGE('',*,*,#226426,.T.); +#226426 = EDGE_CURVE('',#226419,#226427,#226429,.T.); +#226427 = VERTEX_POINT('',#226428); +#226428 = CARTESIAN_POINT('',(91.290459,-58.277919,1.585)); +#226429 = CIRCLE('',#226430,7.216898094228E-02); +#226430 = AXIS2_PLACEMENT_3D('',#226431,#226432,#226433); +#226431 = CARTESIAN_POINT('',(91.218306063893,-58.27639728342,1.585)); +#226432 = DIRECTION('',(0.,0.,-1.)); +#226433 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#226434 = ORIENTED_EDGE('',*,*,#226435,.T.); +#226435 = EDGE_CURVE('',#226427,#226436,#226438,.T.); +#226436 = VERTEX_POINT('',#226437); +#226437 = CARTESIAN_POINT('',(91.290459,-59.202919,1.585)); +#226438 = LINE('',#226439,#226440); +#226439 = CARTESIAN_POINT('',(91.290459,-58.277919,1.585)); +#226440 = VECTOR('',#226441,1.); +#226441 = DIRECTION('',(0.,-1.,0.)); +#226442 = ORIENTED_EDGE('',*,*,#226443,.T.); +#226443 = EDGE_CURVE('',#226436,#226444,#226446,.T.); +#226444 = VERTEX_POINT('',#226445); +#226445 = CARTESIAN_POINT('',(91.515805,-59.20436,1.585)); +#226446 = LINE('',#226447,#226448); +#226447 = CARTESIAN_POINT('',(91.290459,-59.202919,1.585)); +#226448 = VECTOR('',#226449,1.); +#226449 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#226450 = ORIENTED_EDGE('',*,*,#226451,.T.); +#226451 = EDGE_CURVE('',#226444,#226452,#226454,.T.); +#226452 = VERTEX_POINT('',#226453); +#226453 = CARTESIAN_POINT('',(91.501173,-59.352919,1.585)); +#226454 = CIRCLE('',#226455,7.500006711464E-02); +#226455 = AXIS2_PLACEMENT_3D('',#226456,#226457,#226458); +#226456 = CARTESIAN_POINT('',(91.501173067115,-59.27791893288,1.585)); +#226457 = DIRECTION('',(0.,0.,-1.)); +#226458 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#226459 = ORIENTED_EDGE('',*,*,#226460,.T.); +#226460 = EDGE_CURVE('',#226452,#226461,#226463,.T.); +#226461 = VERTEX_POINT('',#226462); +#226462 = CARTESIAN_POINT('',(90.915113,-59.351478,1.585)); +#226463 = LINE('',#226464,#226465); +#226464 = CARTESIAN_POINT('',(91.501173,-59.352919,1.585)); +#226465 = VECTOR('',#226466,1.); +#226466 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#226467 = ORIENTED_EDGE('',*,*,#226468,.T.); +#226468 = EDGE_CURVE('',#226461,#226469,#226471,.T.); +#226469 = VERTEX_POINT('',#226470); +#226470 = CARTESIAN_POINT('',(90.929745,-59.202919,1.585)); +#226471 = CIRCLE('',#226472,7.500006711464E-02); +#226472 = AXIS2_PLACEMENT_3D('',#226473,#226474,#226475); +#226473 = CARTESIAN_POINT('',(90.929744932885,-59.27791906711,1.585)); +#226474 = DIRECTION('',(0.,0.,-1.)); +#226475 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#226476 = ORIENTED_EDGE('',*,*,#226477,.T.); +#226477 = EDGE_CURVE('',#226469,#226478,#226480,.T.); +#226478 = VERTEX_POINT('',#226479); +#226479 = CARTESIAN_POINT('',(91.140459,-59.202919,1.585)); +#226480 = LINE('',#226481,#226482); +#226481 = CARTESIAN_POINT('',(90.929745,-59.202919,1.585)); +#226482 = VECTOR('',#226483,1.); +#226483 = DIRECTION('',(1.,0.,0.)); +#226484 = ORIENTED_EDGE('',*,*,#226485,.T.); +#226485 = EDGE_CURVE('',#226478,#226486,#226488,.T.); +#226486 = VERTEX_POINT('',#226487); +#226487 = CARTESIAN_POINT('',(91.140459,-58.506604,1.585)); +#226488 = LINE('',#226489,#226490); +#226489 = CARTESIAN_POINT('',(91.140459,-59.202919,1.585)); +#226490 = VECTOR('',#226491,1.); +#226491 = DIRECTION('',(0.,1.,0.)); +#226492 = ORIENTED_EDGE('',*,*,#226493,.T.); +#226493 = EDGE_CURVE('',#226486,#226494,#226496,.T.); +#226494 = VERTEX_POINT('',#226495); +#226495 = CARTESIAN_POINT('',(91.064823,-58.579131,1.585)); +#226496 = LINE('',#226497,#226498); +#226497 = CARTESIAN_POINT('',(91.140459,-58.506604,1.585)); +#226498 = VECTOR('',#226499,1.); +#226499 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#226500 = ORIENTED_EDGE('',*,*,#226501,.T.); +#226501 = EDGE_CURVE('',#226494,#226502,#226504,.T.); +#226502 = VERTEX_POINT('',#226503); +#226503 = CARTESIAN_POINT('',(90.949554,-58.63597,1.585)); +#226504 = LINE('',#226505,#226506); +#226505 = CARTESIAN_POINT('',(91.064823,-58.579131,1.585)); +#226506 = VECTOR('',#226507,1.); +#226507 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#226508 = ORIENTED_EDGE('',*,*,#226509,.T.); +#226509 = EDGE_CURVE('',#226502,#226510,#226512,.T.); +#226510 = VERTEX_POINT('',#226511); +#226511 = CARTESIAN_POINT('',(90.896204,-58.496551,1.585)); +#226512 = CIRCLE('',#226513,7.500005272362E-02); +#226513 = AXIS2_PLACEMENT_3D('',#226514,#226515,#226516); +#226514 = CARTESIAN_POINT('',(90.92974455676,-58.56363332972,1.585)); +#226515 = DIRECTION('',(0.,0.,-1.)); +#226516 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#226517 = ORIENTED_EDGE('',*,*,#226518,.T.); +#226518 = EDGE_CURVE('',#226510,#226519,#226521,.T.); +#226519 = VERTEX_POINT('',#226520); +#226520 = CARTESIAN_POINT('',(90.980556,-58.454375,1.585)); +#226521 = LINE('',#226522,#226523); +#226522 = CARTESIAN_POINT('',(90.896204,-58.496551,1.585)); +#226523 = VECTOR('',#226524,1.); +#226524 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#226525 = ORIENTED_EDGE('',*,*,#226526,.T.); +#226526 = EDGE_CURVE('',#226519,#226527,#226529,.T.); +#226527 = VERTEX_POINT('',#226528); +#226528 = CARTESIAN_POINT('',(91.061935,-58.372996,1.585)); +#226529 = LINE('',#226530,#226531); +#226530 = CARTESIAN_POINT('',(90.980556,-58.454375,1.585)); +#226531 = VECTOR('',#226532,1.); +#226532 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#226533 = ORIENTED_EDGE('',*,*,#226534,.T.); +#226534 = EDGE_CURVE('',#226527,#226409,#226535,.T.); +#226535 = LINE('',#226536,#226537); +#226536 = CARTESIAN_POINT('',(91.061935,-58.372996,1.585)); +#226537 = VECTOR('',#226538,1.); +#226538 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#226539 = PLANE('',#226540); +#226540 = AXIS2_PLACEMENT_3D('',#226541,#226542,#226543); +#226541 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226542 = DIRECTION('',(0.,0.,1.)); +#226543 = DIRECTION('',(1.,0.,-0.)); +#226544 = SHELL_BASED_SURFACE_MODEL('',(#226545)); +#226545 = OPEN_SHELL('',(#226546)); +#226546 = ADVANCED_FACE('',(#226547,#226663),#226746,.T.); +#226547 = FACE_BOUND('',#226548,.F.); +#226548 = EDGE_LOOP('',(#226549,#226560,#226568,#226576,#226584,#226592, + #226600,#226608,#226616,#226624,#226632,#226640,#226648,#226657)); +#226549 = ORIENTED_EDGE('',*,*,#226550,.T.); +#226550 = EDGE_CURVE('',#226551,#226553,#226555,.T.); +#226551 = VERTEX_POINT('',#226552); +#226552 = CARTESIAN_POINT('',(89.903805,-58.263287,1.585)); +#226553 = VERTEX_POINT('',#226554); +#226554 = CARTESIAN_POINT('',(89.977364,-58.202919,1.585)); +#226555 = CIRCLE('',#226556,7.500074938982E-02); +#226556 = AXIS2_PLACEMENT_3D('',#226557,#226558,#226559); +#226557 = CARTESIAN_POINT('',(89.97736446611,-58.27791974938,1.585)); +#226558 = DIRECTION('',(0.,0.,-1.)); +#226559 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#226560 = ORIENTED_EDGE('',*,*,#226561,.T.); +#226561 = EDGE_CURVE('',#226553,#226562,#226564,.T.); +#226562 = VERTEX_POINT('',#226563); +#226563 = CARTESIAN_POINT('',(90.222864,-58.203648,1.585)); +#226564 = LINE('',#226565,#226566); +#226565 = CARTESIAN_POINT('',(89.977364,-58.202919,1.585)); +#226566 = VECTOR('',#226567,1.); +#226567 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#226568 = ORIENTED_EDGE('',*,*,#226569,.T.); +#226569 = EDGE_CURVE('',#226562,#226570,#226572,.T.); +#226570 = VERTEX_POINT('',#226571); +#226571 = CARTESIAN_POINT('',(90.399984,-58.263178,1.585)); +#226572 = LINE('',#226573,#226574); +#226573 = CARTESIAN_POINT('',(90.222864,-58.203648,1.585)); +#226574 = VECTOR('',#226575,1.); +#226575 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#226576 = ORIENTED_EDGE('',*,*,#226577,.T.); +#226577 = EDGE_CURVE('',#226570,#226578,#226580,.T.); +#226578 = VERTEX_POINT('',#226579); +#226579 = CARTESIAN_POINT('',(90.516673,-58.38094,1.585)); +#226580 = LINE('',#226581,#226582); +#226581 = CARTESIAN_POINT('',(90.399984,-58.263178,1.585)); +#226582 = VECTOR('',#226583,1.); +#226583 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#226584 = ORIENTED_EDGE('',*,*,#226585,.T.); +#226585 = EDGE_CURVE('',#226578,#226586,#226588,.T.); +#226586 = VERTEX_POINT('',#226587); +#226587 = CARTESIAN_POINT('',(90.573934,-58.497824,1.585)); +#226588 = LINE('',#226589,#226590); +#226589 = CARTESIAN_POINT('',(90.516673,-58.38094,1.585)); +#226590 = VECTOR('',#226591,1.); +#226591 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#226592 = ORIENTED_EDGE('',*,*,#226593,.T.); +#226593 = EDGE_CURVE('',#226586,#226594,#226596,.T.); +#226594 = VERTEX_POINT('',#226595); +#226595 = CARTESIAN_POINT('',(90.623792,-58.70649,1.585)); +#226596 = LINE('',#226597,#226598); +#226597 = CARTESIAN_POINT('',(90.573934,-58.497824,1.585)); +#226598 = VECTOR('',#226599,1.); +#226599 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#226600 = ORIENTED_EDGE('',*,*,#226601,.T.); +#226601 = EDGE_CURVE('',#226594,#226602,#226604,.T.); +#226602 = VERTEX_POINT('',#226603); +#226603 = CARTESIAN_POINT('',(90.621553,-58.867537,1.585)); +#226604 = LINE('',#226605,#226606); +#226605 = CARTESIAN_POINT('',(90.623792,-58.70649,1.585)); +#226606 = VECTOR('',#226607,1.); +#226607 = DIRECTION('',(-1.390143030559E-02,-0.999903370449,0.)); +#226608 = ORIENTED_EDGE('',*,*,#226609,.T.); +#226609 = EDGE_CURVE('',#226602,#226610,#226612,.T.); +#226610 = VERTEX_POINT('',#226611); +#226611 = CARTESIAN_POINT('',(90.568255,-59.073364,1.585)); +#226612 = LINE('',#226613,#226614); +#226613 = CARTESIAN_POINT('',(90.621553,-58.867537,1.585)); +#226614 = VECTOR('',#226615,1.); +#226615 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#226616 = ORIENTED_EDGE('',*,*,#226617,.T.); +#226617 = EDGE_CURVE('',#226610,#226618,#226620,.T.); +#226618 = VERTEX_POINT('',#226619); +#226619 = CARTESIAN_POINT('',(90.511305,-59.182344,1.585)); +#226620 = LINE('',#226621,#226622); +#226621 = CARTESIAN_POINT('',(90.568255,-59.073364,1.585)); +#226622 = VECTOR('',#226623,1.); +#226623 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#226624 = ORIENTED_EDGE('',*,*,#226625,.T.); +#226625 = EDGE_CURVE('',#226618,#226626,#226628,.T.); +#226626 = VERTEX_POINT('',#226627); +#226627 = CARTESIAN_POINT('',(90.395458,-59.295457,1.585)); +#226628 = LINE('',#226629,#226630); +#226629 = CARTESIAN_POINT('',(90.511305,-59.182344,1.585)); +#226630 = VECTOR('',#226631,1.); +#226631 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#226632 = ORIENTED_EDGE('',*,*,#226633,.T.); +#226633 = EDGE_CURVE('',#226626,#226634,#226636,.T.); +#226634 = VERTEX_POINT('',#226635); +#226635 = CARTESIAN_POINT('',(90.222864,-59.352189,1.585)); +#226636 = LINE('',#226637,#226638); +#226637 = CARTESIAN_POINT('',(90.395458,-59.295457,1.585)); +#226638 = VECTOR('',#226639,1.); +#226639 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#226640 = ORIENTED_EDGE('',*,*,#226641,.T.); +#226641 = EDGE_CURVE('',#226634,#226642,#226644,.T.); +#226642 = VERTEX_POINT('',#226643); +#226643 = CARTESIAN_POINT('',(89.962732,-59.351478,1.585)); +#226644 = LINE('',#226645,#226646); +#226645 = CARTESIAN_POINT('',(90.222864,-59.352189,1.585)); +#226646 = VECTOR('',#226647,1.); +#226647 = DIRECTION('',(-0.999996264754,2.733217536645E-03,0.)); +#226648 = ORIENTED_EDGE('',*,*,#226649,.T.); +#226649 = EDGE_CURVE('',#226642,#226650,#226652,.T.); +#226650 = VERTEX_POINT('',#226651); +#226651 = CARTESIAN_POINT('',(89.902364,-59.277919,1.585)); +#226652 = CIRCLE('',#226653,7.500074938982E-02); +#226653 = AXIS2_PLACEMENT_3D('',#226654,#226655,#226656); +#226654 = CARTESIAN_POINT('',(89.977364749388,-59.27791853389,1.585)); +#226655 = DIRECTION('',(0.,0.,-1.)); +#226656 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#226657 = ORIENTED_EDGE('',*,*,#226658,.T.); +#226658 = EDGE_CURVE('',#226650,#226551,#226659,.T.); +#226659 = LINE('',#226660,#226661); +#226660 = CARTESIAN_POINT('',(89.902364,-59.277919,1.585)); +#226661 = VECTOR('',#226662,1.); +#226662 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#226663 = FACE_BOUND('',#226664,.F.); +#226664 = EDGE_LOOP('',(#226665,#226675,#226683,#226691,#226699,#226707, + #226715,#226724,#226732,#226740)); +#226665 = ORIENTED_EDGE('',*,*,#226666,.T.); +#226666 = EDGE_CURVE('',#226667,#226669,#226671,.T.); +#226667 = VERTEX_POINT('',#226668); +#226668 = CARTESIAN_POINT('',(90.317802,-58.39109,1.585)); +#226669 = VERTEX_POINT('',#226670); +#226670 = CARTESIAN_POINT('',(90.203289,-58.352919,1.585)); +#226671 = LINE('',#226672,#226673); +#226672 = CARTESIAN_POINT('',(90.317802,-58.39109,1.585)); +#226673 = VECTOR('',#226674,1.); +#226674 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#226675 = ORIENTED_EDGE('',*,*,#226676,.T.); +#226676 = EDGE_CURVE('',#226669,#226677,#226679,.T.); +#226677 = VERTEX_POINT('',#226678); +#226678 = CARTESIAN_POINT('',(90.052364,-58.352919,1.585)); +#226679 = LINE('',#226680,#226681); +#226680 = CARTESIAN_POINT('',(90.203289,-58.352919,1.585)); +#226681 = VECTOR('',#226682,1.); +#226682 = DIRECTION('',(-1.,0.,0.)); +#226683 = ORIENTED_EDGE('',*,*,#226684,.T.); +#226684 = EDGE_CURVE('',#226677,#226685,#226687,.T.); +#226685 = VERTEX_POINT('',#226686); +#226686 = CARTESIAN_POINT('',(90.052364,-59.202919,1.585)); +#226687 = LINE('',#226688,#226689); +#226688 = CARTESIAN_POINT('',(90.052364,-58.352919,1.585)); +#226689 = VECTOR('',#226690,1.); +#226690 = DIRECTION('',(0.,-1.,0.)); +#226691 = ORIENTED_EDGE('',*,*,#226692,.T.); +#226692 = EDGE_CURVE('',#226685,#226693,#226695,.T.); +#226693 = VERTEX_POINT('',#226694); +#226694 = CARTESIAN_POINT('',(90.203289,-59.202919,1.585)); +#226695 = LINE('',#226696,#226697); +#226696 = CARTESIAN_POINT('',(90.052364,-59.202919,1.585)); +#226697 = VECTOR('',#226698,1.); +#226698 = DIRECTION('',(1.,0.,0.)); +#226699 = ORIENTED_EDGE('',*,*,#226700,.T.); +#226700 = EDGE_CURVE('',#226693,#226701,#226703,.T.); +#226701 = VERTEX_POINT('',#226702); +#226702 = CARTESIAN_POINT('',(90.317802,-59.164747,1.585)); +#226703 = LINE('',#226704,#226705); +#226704 = CARTESIAN_POINT('',(90.203289,-59.202919,1.585)); +#226705 = VECTOR('',#226706,1.); +#226706 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#226707 = ORIENTED_EDGE('',*,*,#226708,.T.); +#226708 = EDGE_CURVE('',#226701,#226709,#226711,.T.); +#226709 = VERTEX_POINT('',#226710); +#226710 = CARTESIAN_POINT('',(90.391914,-59.090634,1.585)); +#226711 = LINE('',#226712,#226713); +#226712 = CARTESIAN_POINT('',(90.317802,-59.164747,1.585)); +#226713 = VECTOR('',#226714,1.); +#226714 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#226715 = ORIENTED_EDGE('',*,*,#226716,.T.); +#226716 = EDGE_CURVE('',#226709,#226717,#226719,.T.); +#226717 = VERTEX_POINT('',#226718); +#226718 = CARTESIAN_POINT('',(90.473792,-58.715724,1.585)); +#226719 = CIRCLE('',#226720,0.611719141131); +#226720 = AXIS2_PLACEMENT_3D('',#226721,#226722,#226723); +#226721 = CARTESIAN_POINT('',(89.865379962242,-58.77924643649,1.585)); +#226722 = DIRECTION('',(0.,0.,1.)); +#226723 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#226724 = ORIENTED_EDGE('',*,*,#226725,.T.); +#226725 = EDGE_CURVE('',#226717,#226726,#226728,.T.); +#226726 = VERTEX_POINT('',#226727); +#226727 = CARTESIAN_POINT('',(90.430408,-58.54219,1.585)); +#226728 = LINE('',#226729,#226730); +#226729 = CARTESIAN_POINT('',(90.473792,-58.715724,1.585)); +#226730 = VECTOR('',#226731,1.); +#226731 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#226732 = ORIENTED_EDGE('',*,*,#226733,.T.); +#226733 = EDGE_CURVE('',#226726,#226734,#226736,.T.); +#226734 = VERTEX_POINT('',#226735); +#226735 = CARTESIAN_POINT('',(90.391915,-58.465203,1.585)); +#226736 = LINE('',#226737,#226738); +#226737 = CARTESIAN_POINT('',(90.430408,-58.54219,1.585)); +#226738 = VECTOR('',#226739,1.); +#226739 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#226740 = ORIENTED_EDGE('',*,*,#226741,.T.); +#226741 = EDGE_CURVE('',#226734,#226667,#226742,.T.); +#226742 = LINE('',#226743,#226744); +#226743 = CARTESIAN_POINT('',(90.391915,-58.465203,1.585)); +#226744 = VECTOR('',#226745,1.); +#226745 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#226746 = PLANE('',#226747); +#226747 = AXIS2_PLACEMENT_3D('',#226748,#226749,#226750); +#226748 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226749 = DIRECTION('',(0.,0.,1.)); +#226750 = DIRECTION('',(1.,0.,-0.)); +#226751 = SHELL_BASED_SURFACE_MODEL('',(#226752)); +#226752 = OPEN_SHELL('',(#226753)); +#226753 = ADVANCED_FACE('',(#226754,#226856),#226958,.T.); +#226754 = FACE_BOUND('',#226755,.F.); +#226755 = EDGE_LOOP('',(#226756,#226767,#226775,#226783,#226792,#226800, + #226808,#226817,#226825,#226833,#226842,#226850)); +#226756 = ORIENTED_EDGE('',*,*,#226757,.T.); +#226757 = EDGE_CURVE('',#226758,#226760,#226762,.T.); +#226758 = VERTEX_POINT('',#226759); +#226759 = CARTESIAN_POINT('',(91.985142,-58.26242,1.585)); +#226760 = VERTEX_POINT('',#226761); +#226761 = CARTESIAN_POINT('',(92.35798,-58.267786,1.585)); +#226762 = CIRCLE('',#226763,0.291788488016); +#226763 = AXIS2_PLACEMENT_3D('',#226764,#226765,#226766); +#226764 = CARTESIAN_POINT('',(92.16833086911,-58.48953750256,1.585)); +#226765 = DIRECTION('',(0.,0.,-1.)); +#226766 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#226767 = ORIENTED_EDGE('',*,*,#226768,.T.); +#226768 = EDGE_CURVE('',#226760,#226769,#226771,.T.); +#226769 = VERTEX_POINT('',#226770); +#226770 = CARTESIAN_POINT('',(92.421433,-58.333316,1.585)); +#226771 = LINE('',#226772,#226773); +#226772 = CARTESIAN_POINT('',(92.35798,-58.267786,1.585)); +#226773 = VECTOR('',#226774,1.); +#226774 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#226775 = ORIENTED_EDGE('',*,*,#226776,.T.); +#226776 = EDGE_CURVE('',#226769,#226777,#226779,.T.); +#226777 = VERTEX_POINT('',#226778); +#226778 = CARTESIAN_POINT('',(92.478696,-58.450205,1.585)); +#226779 = LINE('',#226780,#226781); +#226780 = CARTESIAN_POINT('',(92.421433,-58.333316,1.585)); +#226781 = VECTOR('',#226782,1.); +#226782 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#226783 = ORIENTED_EDGE('',*,*,#226784,.T.); +#226784 = EDGE_CURVE('',#226777,#226785,#226787,.T.); +#226785 = VERTEX_POINT('',#226786); +#226786 = CARTESIAN_POINT('',(92.473017,-59.120983,1.585)); +#226787 = CIRCLE('',#226788,0.967158496826); +#226788 = AXIS2_PLACEMENT_3D('',#226789,#226790,#226791); +#226789 = CARTESIAN_POINT('',(91.568749706867,-58.77791417228,1.585)); +#226790 = DIRECTION('',(0.,0.,-1.)); +#226791 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#226792 = ORIENTED_EDGE('',*,*,#226793,.T.); +#226793 = EDGE_CURVE('',#226785,#226794,#226796,.T.); +#226794 = VERTEX_POINT('',#226795); +#226795 = CARTESIAN_POINT('',(92.416067,-59.229963,1.585)); +#226796 = LINE('',#226797,#226798); +#226797 = CARTESIAN_POINT('',(92.473017,-59.120983,1.585)); +#226798 = VECTOR('',#226799,1.); +#226799 = DIRECTION('',(-0.463146784148,-0.886281589752,0.)); +#226800 = ORIENTED_EDGE('',*,*,#226801,.T.); +#226801 = EDGE_CURVE('',#226794,#226802,#226804,.T.); +#226802 = VERTEX_POINT('',#226803); +#226803 = CARTESIAN_POINT('',(92.350537,-59.293417,1.585)); +#226804 = LINE('',#226805,#226806); +#226805 = CARTESIAN_POINT('',(92.416067,-59.229963,1.585)); +#226806 = VECTOR('',#226807,1.); +#226807 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#226808 = ORIENTED_EDGE('',*,*,#226809,.T.); +#226809 = EDGE_CURVE('',#226802,#226810,#226812,.T.); +#226810 = VERTEX_POINT('',#226811); +#226811 = CARTESIAN_POINT('',(91.977698,-59.28805,1.585)); +#226812 = CIRCLE('',#226813,0.290998264264); +#226813 = AXIS2_PLACEMENT_3D('',#226814,#226815,#226816); +#226814 = CARTESIAN_POINT('',(92.167333418158,-59.06732755441,1.585)); +#226815 = DIRECTION('',(-0.,0.,-1.)); +#226816 = DIRECTION('',(0.629569328552,-0.77694430981,-0.)); +#226817 = ORIENTED_EDGE('',*,*,#226818,.T.); +#226818 = EDGE_CURVE('',#226810,#226819,#226821,.T.); +#226819 = VERTEX_POINT('',#226820); +#226820 = CARTESIAN_POINT('',(91.914245,-59.222517,1.585)); +#226821 = LINE('',#226822,#226823); +#226822 = CARTESIAN_POINT('',(91.977698,-59.28805,1.585)); +#226823 = VECTOR('',#226824,1.); +#226824 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#226825 = ORIENTED_EDGE('',*,*,#226826,.T.); +#226826 = EDGE_CURVE('',#226819,#226827,#226829,.T.); +#226827 = VERTEX_POINT('',#226828); +#226828 = CARTESIAN_POINT('',(91.856984,-59.105632,1.585)); +#226829 = LINE('',#226830,#226831); +#226830 = CARTESIAN_POINT('',(91.914245,-59.222517,1.585)); +#226831 = VECTOR('',#226832,1.); +#226832 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#226833 = ORIENTED_EDGE('',*,*,#226834,.T.); +#226834 = EDGE_CURVE('',#226827,#226835,#226837,.T.); +#226835 = VERTEX_POINT('',#226836); +#226836 = CARTESIAN_POINT('',(91.862663,-58.434854,1.585)); +#226837 = CIRCLE('',#226838,0.967158496826); +#226838 = AXIS2_PLACEMENT_3D('',#226839,#226840,#226841); +#226839 = CARTESIAN_POINT('',(92.766930293133,-58.77792282772,1.585)); +#226840 = DIRECTION('',(0.,0.,-1.)); +#226841 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#226842 = ORIENTED_EDGE('',*,*,#226843,.T.); +#226843 = EDGE_CURVE('',#226835,#226844,#226846,.T.); +#226844 = VERTEX_POINT('',#226845); +#226845 = CARTESIAN_POINT('',(91.919612,-58.325873,1.585)); +#226846 = LINE('',#226847,#226848); +#226847 = CARTESIAN_POINT('',(91.862663,-58.434854,1.585)); +#226848 = VECTOR('',#226849,1.); +#226849 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#226850 = ORIENTED_EDGE('',*,*,#226851,.T.); +#226851 = EDGE_CURVE('',#226844,#226758,#226852,.T.); +#226852 = LINE('',#226853,#226854); +#226853 = CARTESIAN_POINT('',(91.919612,-58.325873,1.585)); +#226854 = VECTOR('',#226855,1.); +#226855 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#226856 = FACE_BOUND('',#226857,.F.); +#226857 = EDGE_LOOP('',(#226858,#226869,#226877,#226885,#226894,#226902, + #226910,#226919,#226927,#226935,#226944,#226952)); +#226858 = ORIENTED_EDGE('',*,*,#226859,.T.); +#226859 = EDGE_CURVE('',#226860,#226862,#226864,.T.); +#226860 = VERTEX_POINT('',#226861); +#226861 = CARTESIAN_POINT('',(92.26627,-58.387177,1.585)); +#226862 = VERTEX_POINT('',#226863); +#226863 = CARTESIAN_POINT('',(92.06941,-58.387177,1.585)); +#226864 = CIRCLE('',#226865,0.148516804184); +#226865 = AXIS2_PLACEMENT_3D('',#226866,#226867,#226868); +#226866 = CARTESIAN_POINT('',(92.16784,-58.498392,1.585)); +#226867 = DIRECTION('',(0.,0.,1.)); +#226868 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#226869 = ORIENTED_EDGE('',*,*,#226870,.T.); +#226870 = EDGE_CURVE('',#226862,#226871,#226873,.T.); +#226871 = VERTEX_POINT('',#226872); +#226872 = CARTESIAN_POINT('',(92.039003,-58.417584,1.585)); +#226873 = LINE('',#226874,#226875); +#226874 = CARTESIAN_POINT('',(92.06941,-58.387177,1.585)); +#226875 = VECTOR('',#226876,1.); +#226876 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#226877 = ORIENTED_EDGE('',*,*,#226878,.T.); +#226878 = EDGE_CURVE('',#226871,#226879,#226881,.T.); +#226879 = VERTEX_POINT('',#226880); +#226880 = CARTESIAN_POINT('',(92.000509,-58.494571,1.585)); +#226881 = LINE('',#226882,#226883); +#226882 = CARTESIAN_POINT('',(92.039003,-58.417584,1.585)); +#226883 = VECTOR('',#226884,1.); +#226884 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#226885 = ORIENTED_EDGE('',*,*,#226886,.T.); +#226886 = EDGE_CURVE('',#226879,#226887,#226889,.T.); +#226887 = VERTEX_POINT('',#226888); +#226888 = CARTESIAN_POINT('',(92.000509,-59.061266,1.585)); +#226889 = CIRCLE('',#226890,0.815450468384); +#226890 = AXIS2_PLACEMENT_3D('',#226891,#226892,#226893); +#226891 = CARTESIAN_POINT('',(92.765148562559,-58.7779185,1.585)); +#226892 = DIRECTION('',(0.,0.,1.)); +#226893 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#226894 = ORIENTED_EDGE('',*,*,#226895,.T.); +#226895 = EDGE_CURVE('',#226887,#226896,#226898,.T.); +#226896 = VERTEX_POINT('',#226897); +#226897 = CARTESIAN_POINT('',(92.039003,-59.138253,1.585)); +#226898 = LINE('',#226899,#226900); +#226899 = CARTESIAN_POINT('',(92.000509,-59.061266,1.585)); +#226900 = VECTOR('',#226901,1.); +#226901 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#226902 = ORIENTED_EDGE('',*,*,#226903,.T.); +#226903 = EDGE_CURVE('',#226896,#226904,#226906,.T.); +#226904 = VERTEX_POINT('',#226905); +#226905 = CARTESIAN_POINT('',(92.06941,-59.168661,1.585)); +#226906 = LINE('',#226907,#226908); +#226907 = CARTESIAN_POINT('',(92.039003,-59.138253,1.585)); +#226908 = VECTOR('',#226909,1.); +#226909 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#226910 = ORIENTED_EDGE('',*,*,#226911,.T.); +#226911 = EDGE_CURVE('',#226904,#226912,#226914,.T.); +#226912 = VERTEX_POINT('',#226913); +#226913 = CARTESIAN_POINT('',(92.266269,-59.168661,1.585)); +#226914 = CIRCLE('',#226915,0.14851572397); +#226915 = AXIS2_PLACEMENT_3D('',#226916,#226917,#226918); +#226916 = CARTESIAN_POINT('',(92.1678395,-59.057447,1.585)); +#226917 = DIRECTION('',(0.,0.,1.)); +#226918 = DIRECTION('',(-0.662754739829,-0.748836534121,0.)); +#226919 = ORIENTED_EDGE('',*,*,#226920,.T.); +#226920 = EDGE_CURVE('',#226912,#226921,#226923,.T.); +#226921 = VERTEX_POINT('',#226922); +#226922 = CARTESIAN_POINT('',(92.296676,-59.138253,1.585)); +#226923 = LINE('',#226924,#226925); +#226924 = CARTESIAN_POINT('',(92.266269,-59.168661,1.585)); +#226925 = VECTOR('',#226926,1.); +#226926 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#226927 = ORIENTED_EDGE('',*,*,#226928,.T.); +#226928 = EDGE_CURVE('',#226921,#226929,#226931,.T.); +#226929 = VERTEX_POINT('',#226930); +#226930 = CARTESIAN_POINT('',(92.33517,-59.061266,1.585)); +#226931 = LINE('',#226932,#226933); +#226932 = CARTESIAN_POINT('',(92.296676,-59.138253,1.585)); +#226933 = VECTOR('',#226934,1.); +#226934 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#226935 = ORIENTED_EDGE('',*,*,#226936,.T.); +#226936 = EDGE_CURVE('',#226929,#226937,#226939,.T.); +#226937 = VERTEX_POINT('',#226938); +#226938 = CARTESIAN_POINT('',(92.33517,-58.494571,1.585)); +#226939 = CIRCLE('',#226940,0.815433004022); +#226940 = AXIS2_PLACEMENT_3D('',#226941,#226942,#226943); +#226941 = CARTESIAN_POINT('',(91.57054906235,-58.7779185,1.585)); +#226942 = DIRECTION('',(0.,-0.,1.)); +#226943 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#226944 = ORIENTED_EDGE('',*,*,#226945,.T.); +#226945 = EDGE_CURVE('',#226937,#226946,#226948,.T.); +#226946 = VERTEX_POINT('',#226947); +#226947 = CARTESIAN_POINT('',(92.296677,-58.417584,1.585)); +#226948 = LINE('',#226949,#226950); +#226949 = CARTESIAN_POINT('',(92.33517,-58.494571,1.585)); +#226950 = VECTOR('',#226951,1.); +#226951 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#226952 = ORIENTED_EDGE('',*,*,#226953,.T.); +#226953 = EDGE_CURVE('',#226946,#226860,#226954,.T.); +#226954 = LINE('',#226955,#226956); +#226955 = CARTESIAN_POINT('',(92.296677,-58.417584,1.585)); +#226956 = VECTOR('',#226957,1.); +#226957 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#226958 = PLANE('',#226959); +#226959 = AXIS2_PLACEMENT_3D('',#226960,#226961,#226962); +#226960 = CARTESIAN_POINT('',(0.,0.,1.585)); +#226961 = DIRECTION('',(0.,0.,1.)); +#226962 = DIRECTION('',(1.,0.,-0.)); +#226963 = SHELL_BASED_SURFACE_MODEL('',(#226964)); +#226964 = OPEN_SHELL('',(#226965)); +#226965 = ADVANCED_FACE('',(#226966,#227051),#227110,.T.); +#226966 = FACE_BOUND('',#226967,.F.); +#226967 = EDGE_LOOP('',(#226968,#226979,#226987,#226995,#227003,#227012, + #227020,#227029,#227037,#227045)); +#226968 = ORIENTED_EDGE('',*,*,#226969,.T.); +#226969 = EDGE_CURVE('',#226970,#226972,#226974,.T.); +#226970 = VERTEX_POINT('',#226971); +#226971 = CARTESIAN_POINT('',(206.151866,-58.224267,1.585)); +#226972 = VERTEX_POINT('',#226973); +#226973 = CARTESIAN_POINT('',(206.635776,-58.295163,1.585)); +#226974 = CIRCLE('',#226975,0.34461174713); +#226975 = AXIS2_PLACEMENT_3D('',#226976,#226977,#226978); +#226976 = CARTESIAN_POINT('',(206.35862294377,-58.49996397579,1.585)); +#226977 = DIRECTION('',(0.,0.,-1.)); +#226978 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#226979 = ORIENTED_EDGE('',*,*,#226980,.T.); +#226980 = EDGE_CURVE('',#226972,#226981,#226983,.T.); +#226981 = VERTEX_POINT('',#226982); +#226982 = CARTESIAN_POINT('',(206.693837,-58.41561,1.585)); +#226983 = LINE('',#226984,#226985); +#226984 = CARTESIAN_POINT('',(206.635776,-58.295163,1.585)); +#226985 = VECTOR('',#226986,1.); +#226986 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#226987 = ORIENTED_EDGE('',*,*,#226988,.T.); +#226988 = EDGE_CURVE('',#226981,#226989,#226991,.T.); +#226989 = VERTEX_POINT('',#226990); +#226990 = CARTESIAN_POINT('',(206.695278,-58.736194,1.585)); +#226991 = LINE('',#226992,#226993); +#226992 = CARTESIAN_POINT('',(206.693837,-58.41561,1.585)); +#226993 = VECTOR('',#226994,1.); +#226994 = DIRECTION('',(4.494876360039E-03,-0.999989897992,0.)); +#226995 = ORIENTED_EDGE('',*,*,#226996,.T.); +#226996 = EDGE_CURVE('',#226989,#226997,#226999,.T.); +#226997 = VERTEX_POINT('',#226998); +#226998 = CARTESIAN_POINT('',(207.111101,-58.737635,1.585)); +#226999 = LINE('',#227000,#227001); +#227000 = CARTESIAN_POINT('',(206.695278,-58.736194,1.585)); +#227001 = VECTOR('',#227002,1.); +#227002 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#227003 = ORIENTED_EDGE('',*,*,#227004,.T.); +#227004 = EDGE_CURVE('',#226997,#227005,#227007,.T.); +#227005 = VERTEX_POINT('',#227006); +#227006 = CARTESIAN_POINT('',(207.096469,-58.886194,1.585)); +#227007 = CIRCLE('',#227008,7.500006711464E-02); +#227008 = AXIS2_PLACEMENT_3D('',#227009,#227010,#227011); +#227009 = CARTESIAN_POINT('',(207.09646906711,-58.81119393288,1.585)); +#227010 = DIRECTION('',(0.,0.,-1.)); +#227011 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227012 = ORIENTED_EDGE('',*,*,#227013,.T.); +#227013 = EDGE_CURVE('',#227005,#227014,#227016,.T.); +#227014 = VERTEX_POINT('',#227015); +#227015 = CARTESIAN_POINT('',(206.081837,-58.884753,1.585)); +#227016 = LINE('',#227017,#227018); +#227017 = CARTESIAN_POINT('',(207.096469,-58.886194,1.585)); +#227018 = VECTOR('',#227019,1.); +#227019 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#227020 = ORIENTED_EDGE('',*,*,#227021,.T.); +#227021 = EDGE_CURVE('',#227014,#227022,#227024,.T.); +#227022 = VERTEX_POINT('',#227023); +#227023 = CARTESIAN_POINT('',(206.021469,-58.811194,1.585)); +#227024 = CIRCLE('',#227025,7.500074938986E-02); +#227025 = AXIS2_PLACEMENT_3D('',#227026,#227027,#227028); +#227026 = CARTESIAN_POINT('',(206.09646974938,-58.81119353389,1.585)); +#227027 = DIRECTION('',(0.,0.,-1.)); +#227028 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#227029 = ORIENTED_EDGE('',*,*,#227030,.T.); +#227030 = EDGE_CURVE('',#227022,#227031,#227033,.T.); +#227031 = VERTEX_POINT('',#227032); +#227032 = CARTESIAN_POINT('',(206.024132,-58.410433,1.585)); +#227033 = LINE('',#227034,#227035); +#227034 = CARTESIAN_POINT('',(206.021469,-58.811194,1.585)); +#227035 = VECTOR('',#227036,1.); +#227036 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#227037 = ORIENTED_EDGE('',*,*,#227038,.T.); +#227038 = EDGE_CURVE('',#227031,#227039,#227041,.T.); +#227039 = VERTEX_POINT('',#227040); +#227040 = CARTESIAN_POINT('',(206.086336,-58.28772,1.585)); +#227041 = LINE('',#227042,#227043); +#227042 = CARTESIAN_POINT('',(206.024132,-58.410433,1.585)); +#227043 = VECTOR('',#227044,1.); +#227044 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#227045 = ORIENTED_EDGE('',*,*,#227046,.T.); +#227046 = EDGE_CURVE('',#227039,#226970,#227047,.T.); +#227047 = LINE('',#227048,#227049); +#227048 = CARTESIAN_POINT('',(206.086336,-58.28772,1.585)); +#227049 = VECTOR('',#227050,1.); +#227050 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#227051 = FACE_BOUND('',#227052,.F.); +#227052 = EDGE_LOOP('',(#227053,#227064,#227072,#227080,#227088,#227096, + #227104)); +#227053 = ORIENTED_EDGE('',*,*,#227054,.T.); +#227054 = EDGE_CURVE('',#227055,#227057,#227059,.T.); +#227055 = VERTEX_POINT('',#227056); +#227056 = CARTESIAN_POINT('',(206.480613,-58.349024,1.585)); +#227057 = VERTEX_POINT('',#227058); +#227058 = CARTESIAN_POINT('',(206.205727,-58.379431,1.585)); +#227059 = CIRCLE('',#227060,0.198386215365); +#227060 = AXIS2_PLACEMENT_3D('',#227061,#227062,#227063); +#227061 = CARTESIAN_POINT('',(206.35880995783,-58.5056161753,1.585)); +#227062 = DIRECTION('',(0.,0.,1.)); +#227063 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#227064 = ORIENTED_EDGE('',*,*,#227065,.T.); +#227065 = EDGE_CURVE('',#227057,#227066,#227068,.T.); +#227066 = VERTEX_POINT('',#227067); +#227067 = CARTESIAN_POINT('',(206.171469,-58.447947,1.585)); +#227068 = LINE('',#227069,#227070); +#227069 = CARTESIAN_POINT('',(206.205727,-58.379431,1.585)); +#227070 = VECTOR('',#227071,1.); +#227071 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#227072 = ORIENTED_EDGE('',*,*,#227073,.T.); +#227073 = EDGE_CURVE('',#227066,#227074,#227076,.T.); +#227074 = VERTEX_POINT('',#227075); +#227075 = CARTESIAN_POINT('',(206.171469,-58.736194,1.585)); +#227076 = LINE('',#227077,#227078); +#227077 = CARTESIAN_POINT('',(206.171469,-58.447947,1.585)); +#227078 = VECTOR('',#227079,1.); +#227079 = DIRECTION('',(0.,-1.,0.)); +#227080 = ORIENTED_EDGE('',*,*,#227081,.T.); +#227081 = EDGE_CURVE('',#227074,#227082,#227084,.T.); +#227082 = VERTEX_POINT('',#227083); +#227083 = CARTESIAN_POINT('',(206.545278,-58.736194,1.585)); +#227084 = LINE('',#227085,#227086); +#227085 = CARTESIAN_POINT('',(206.171469,-58.736194,1.585)); +#227086 = VECTOR('',#227087,1.); +#227087 = DIRECTION('',(1.,0.,0.)); +#227088 = ORIENTED_EDGE('',*,*,#227089,.T.); +#227089 = EDGE_CURVE('',#227082,#227090,#227092,.T.); +#227090 = VERTEX_POINT('',#227091); +#227091 = CARTESIAN_POINT('',(206.545278,-58.447947,1.585)); +#227092 = LINE('',#227093,#227094); +#227093 = CARTESIAN_POINT('',(206.545278,-58.736194,1.585)); +#227094 = VECTOR('',#227095,1.); +#227095 = DIRECTION('',(0.,1.,0.)); +#227096 = ORIENTED_EDGE('',*,*,#227097,.T.); +#227097 = EDGE_CURVE('',#227090,#227098,#227100,.T.); +#227098 = VERTEX_POINT('',#227099); +#227099 = CARTESIAN_POINT('',(206.51102,-58.379431,1.585)); +#227100 = LINE('',#227101,#227102); +#227101 = CARTESIAN_POINT('',(206.545278,-58.447947,1.585)); +#227102 = VECTOR('',#227103,1.); +#227103 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#227104 = ORIENTED_EDGE('',*,*,#227105,.T.); +#227105 = EDGE_CURVE('',#227098,#227055,#227106,.T.); +#227106 = LINE('',#227107,#227108); +#227107 = CARTESIAN_POINT('',(206.51102,-58.379431,1.585)); +#227108 = VECTOR('',#227109,1.); +#227109 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#227110 = PLANE('',#227111); +#227111 = AXIS2_PLACEMENT_3D('',#227112,#227113,#227114); +#227112 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227113 = DIRECTION('',(0.,0.,1.)); +#227114 = DIRECTION('',(1.,0.,-0.)); +#227115 = SHELL_BASED_SURFACE_MODEL('',(#227116)); +#227116 = OPEN_SHELL('',(#227117)); +#227117 = ADVANCED_FACE('',(#227118),#227154,.T.); +#227118 = FACE_BOUND('',#227119,.F.); +#227119 = EDGE_LOOP('',(#227120,#227131,#227139,#227148)); +#227120 = ORIENTED_EDGE('',*,*,#227121,.T.); +#227121 = EDGE_CURVE('',#227122,#227124,#227126,.T.); +#227122 = VERTEX_POINT('',#227123); +#227123 = CARTESIAN_POINT('',(163.629392,-58.8606,1.585)); +#227124 = VERTEX_POINT('',#227125); +#227125 = CARTESIAN_POINT('',(163.629392,-58.7406,1.585)); +#227126 = CIRCLE('',#227127,6.000000000042E-02); +#227127 = AXIS2_PLACEMENT_3D('',#227128,#227129,#227130); +#227128 = CARTESIAN_POINT('',(163.62939177441,-58.8006,1.585)); +#227129 = DIRECTION('',(0.,0.,-1.)); +#227130 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#227131 = ORIENTED_EDGE('',*,*,#227132,.T.); +#227132 = EDGE_CURVE('',#227124,#227133,#227135,.T.); +#227133 = VERTEX_POINT('',#227134); +#227134 = CARTESIAN_POINT('',(164.103908,-58.7406,1.585)); +#227135 = LINE('',#227136,#227137); +#227136 = CARTESIAN_POINT('',(163.629392,-58.7406,1.585)); +#227137 = VECTOR('',#227138,1.); +#227138 = DIRECTION('',(1.,0.,0.)); +#227139 = ORIENTED_EDGE('',*,*,#227140,.T.); +#227140 = EDGE_CURVE('',#227133,#227141,#227143,.T.); +#227141 = VERTEX_POINT('',#227142); +#227142 = CARTESIAN_POINT('',(164.103908,-58.8606,1.585)); +#227143 = CIRCLE('',#227144,6.000000000043E-02); +#227144 = AXIS2_PLACEMENT_3D('',#227145,#227146,#227147); +#227145 = CARTESIAN_POINT('',(164.10390822558,-58.8006,1.585)); +#227146 = DIRECTION('',(0.,0.,-1.)); +#227147 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#227148 = ORIENTED_EDGE('',*,*,#227149,.T.); +#227149 = EDGE_CURVE('',#227141,#227122,#227150,.T.); +#227150 = LINE('',#227151,#227152); +#227151 = CARTESIAN_POINT('',(164.103908,-58.8606,1.585)); +#227152 = VECTOR('',#227153,1.); +#227153 = DIRECTION('',(-1.,0.,0.)); +#227154 = PLANE('',#227155); +#227155 = AXIS2_PLACEMENT_3D('',#227156,#227157,#227158); +#227156 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227157 = DIRECTION('',(0.,0.,1.)); +#227158 = DIRECTION('',(1.,0.,-0.)); +#227159 = SHELL_BASED_SURFACE_MODEL('',(#227160)); +#227160 = OPEN_SHELL('',(#227161)); +#227161 = ADVANCED_FACE('',(#227162),#227198,.T.); +#227162 = FACE_BOUND('',#227163,.F.); +#227163 = EDGE_LOOP('',(#227164,#227175,#227183,#227192)); +#227164 = ORIENTED_EDGE('',*,*,#227165,.T.); +#227165 = EDGE_CURVE('',#227166,#227168,#227170,.T.); +#227166 = VERTEX_POINT('',#227167); +#227167 = CARTESIAN_POINT('',(167.129392,-58.8606,1.585)); +#227168 = VERTEX_POINT('',#227169); +#227169 = CARTESIAN_POINT('',(167.129392,-58.7406,1.585)); +#227170 = CIRCLE('',#227171,6.000000000042E-02); +#227171 = AXIS2_PLACEMENT_3D('',#227172,#227173,#227174); +#227172 = CARTESIAN_POINT('',(167.12939177441,-58.8006,1.585)); +#227173 = DIRECTION('',(0.,0.,-1.)); +#227174 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#227175 = ORIENTED_EDGE('',*,*,#227176,.T.); +#227176 = EDGE_CURVE('',#227168,#227177,#227179,.T.); +#227177 = VERTEX_POINT('',#227178); +#227178 = CARTESIAN_POINT('',(167.603908,-58.7406,1.585)); +#227179 = LINE('',#227180,#227181); +#227180 = CARTESIAN_POINT('',(167.129392,-58.7406,1.585)); +#227181 = VECTOR('',#227182,1.); +#227182 = DIRECTION('',(1.,0.,0.)); +#227183 = ORIENTED_EDGE('',*,*,#227184,.T.); +#227184 = EDGE_CURVE('',#227177,#227185,#227187,.T.); +#227185 = VERTEX_POINT('',#227186); +#227186 = CARTESIAN_POINT('',(167.603908,-58.8606,1.585)); +#227187 = CIRCLE('',#227188,6.000000000043E-02); +#227188 = AXIS2_PLACEMENT_3D('',#227189,#227190,#227191); +#227189 = CARTESIAN_POINT('',(167.60390822558,-58.8006,1.585)); +#227190 = DIRECTION('',(0.,0.,-1.)); +#227191 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#227192 = ORIENTED_EDGE('',*,*,#227193,.T.); +#227193 = EDGE_CURVE('',#227185,#227166,#227194,.T.); +#227194 = LINE('',#227195,#227196); +#227195 = CARTESIAN_POINT('',(167.603908,-58.8606,1.585)); +#227196 = VECTOR('',#227197,1.); +#227197 = DIRECTION('',(-1.,0.,0.)); +#227198 = PLANE('',#227199); +#227199 = AXIS2_PLACEMENT_3D('',#227200,#227201,#227202); +#227200 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227201 = DIRECTION('',(0.,0.,1.)); +#227202 = DIRECTION('',(1.,0.,-0.)); +#227203 = SHELL_BASED_SURFACE_MODEL('',(#227204)); +#227204 = OPEN_SHELL('',(#227205)); +#227205 = ADVANCED_FACE('',(#227206),#227242,.T.); +#227206 = FACE_BOUND('',#227207,.F.); +#227207 = EDGE_LOOP('',(#227208,#227219,#227227,#227236)); +#227208 = ORIENTED_EDGE('',*,*,#227209,.T.); +#227209 = EDGE_CURVE('',#227210,#227212,#227214,.T.); +#227210 = VERTEX_POINT('',#227211); +#227211 = CARTESIAN_POINT('',(173.954392,-58.8606,1.585)); +#227212 = VERTEX_POINT('',#227213); +#227213 = CARTESIAN_POINT('',(173.954392,-58.7406,1.585)); +#227214 = CIRCLE('',#227215,6.000000000042E-02); +#227215 = AXIS2_PLACEMENT_3D('',#227216,#227217,#227218); +#227216 = CARTESIAN_POINT('',(173.95439177441,-58.8006,1.585)); +#227217 = DIRECTION('',(0.,0.,-1.)); +#227218 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#227219 = ORIENTED_EDGE('',*,*,#227220,.T.); +#227220 = EDGE_CURVE('',#227212,#227221,#227223,.T.); +#227221 = VERTEX_POINT('',#227222); +#227222 = CARTESIAN_POINT('',(174.428908,-58.7406,1.585)); +#227223 = LINE('',#227224,#227225); +#227224 = CARTESIAN_POINT('',(173.954392,-58.7406,1.585)); +#227225 = VECTOR('',#227226,1.); +#227226 = DIRECTION('',(1.,0.,0.)); +#227227 = ORIENTED_EDGE('',*,*,#227228,.T.); +#227228 = EDGE_CURVE('',#227221,#227229,#227231,.T.); +#227229 = VERTEX_POINT('',#227230); +#227230 = CARTESIAN_POINT('',(174.428908,-58.8606,1.585)); +#227231 = CIRCLE('',#227232,6.000000000043E-02); +#227232 = AXIS2_PLACEMENT_3D('',#227233,#227234,#227235); +#227233 = CARTESIAN_POINT('',(174.42890822558,-58.8006,1.585)); +#227234 = DIRECTION('',(0.,0.,-1.)); +#227235 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#227236 = ORIENTED_EDGE('',*,*,#227237,.T.); +#227237 = EDGE_CURVE('',#227229,#227210,#227238,.T.); +#227238 = LINE('',#227239,#227240); +#227239 = CARTESIAN_POINT('',(174.428908,-58.8606,1.585)); +#227240 = VECTOR('',#227241,1.); +#227241 = DIRECTION('',(-1.,0.,0.)); +#227242 = PLANE('',#227243); +#227243 = AXIS2_PLACEMENT_3D('',#227244,#227245,#227246); +#227244 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227245 = DIRECTION('',(0.,0.,1.)); +#227246 = DIRECTION('',(1.,0.,-0.)); +#227247 = SHELL_BASED_SURFACE_MODEL('',(#227248)); +#227248 = OPEN_SHELL('',(#227249)); +#227249 = ADVANCED_FACE('',(#227250),#227286,.T.); +#227250 = FACE_BOUND('',#227251,.F.); +#227251 = EDGE_LOOP('',(#227252,#227263,#227271,#227280)); +#227252 = ORIENTED_EDGE('',*,*,#227253,.T.); +#227253 = EDGE_CURVE('',#227254,#227256,#227258,.T.); +#227254 = VERTEX_POINT('',#227255); +#227255 = CARTESIAN_POINT('',(177.954392,-58.8606,1.585)); +#227256 = VERTEX_POINT('',#227257); +#227257 = CARTESIAN_POINT('',(177.954392,-58.7406,1.585)); +#227258 = CIRCLE('',#227259,6.000000000042E-02); +#227259 = AXIS2_PLACEMENT_3D('',#227260,#227261,#227262); +#227260 = CARTESIAN_POINT('',(177.95439177441,-58.8006,1.585)); +#227261 = DIRECTION('',(0.,0.,-1.)); +#227262 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#227263 = ORIENTED_EDGE('',*,*,#227264,.T.); +#227264 = EDGE_CURVE('',#227256,#227265,#227267,.T.); +#227265 = VERTEX_POINT('',#227266); +#227266 = CARTESIAN_POINT('',(178.428908,-58.7406,1.585)); +#227267 = LINE('',#227268,#227269); +#227268 = CARTESIAN_POINT('',(177.954392,-58.7406,1.585)); +#227269 = VECTOR('',#227270,1.); +#227270 = DIRECTION('',(1.,0.,0.)); +#227271 = ORIENTED_EDGE('',*,*,#227272,.T.); +#227272 = EDGE_CURVE('',#227265,#227273,#227275,.T.); +#227273 = VERTEX_POINT('',#227274); +#227274 = CARTESIAN_POINT('',(178.428908,-58.8606,1.585)); +#227275 = CIRCLE('',#227276,6.000000000043E-02); +#227276 = AXIS2_PLACEMENT_3D('',#227277,#227278,#227279); +#227277 = CARTESIAN_POINT('',(178.42890822558,-58.8006,1.585)); +#227278 = DIRECTION('',(0.,0.,-1.)); +#227279 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#227280 = ORIENTED_EDGE('',*,*,#227281,.T.); +#227281 = EDGE_CURVE('',#227273,#227254,#227282,.T.); +#227282 = LINE('',#227283,#227284); +#227283 = CARTESIAN_POINT('',(178.428908,-58.8606,1.585)); +#227284 = VECTOR('',#227285,1.); +#227285 = DIRECTION('',(-1.,0.,0.)); +#227286 = PLANE('',#227287); +#227287 = AXIS2_PLACEMENT_3D('',#227288,#227289,#227290); +#227288 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227289 = DIRECTION('',(0.,0.,1.)); +#227290 = DIRECTION('',(1.,0.,-0.)); +#227291 = SHELL_BASED_SURFACE_MODEL('',(#227292)); +#227292 = OPEN_SHELL('',(#227293)); +#227293 = ADVANCED_FACE('',(#227294),#227371,.T.); +#227294 = FACE_BOUND('',#227295,.F.); +#227295 = EDGE_LOOP('',(#227296,#227307,#227315,#227324,#227332,#227341, + #227349,#227357,#227365)); +#227296 = ORIENTED_EDGE('',*,*,#227297,.T.); +#227297 = EDGE_CURVE('',#227298,#227300,#227302,.T.); +#227298 = VERTEX_POINT('',#227299); +#227299 = CARTESIAN_POINT('',(154.994761,-57.926035,1.585)); +#227300 = VERTEX_POINT('',#227301); +#227301 = CARTESIAN_POINT('',(155.080152,-57.859764,1.585)); +#227302 = CIRCLE('',#227303,6.499990070434E-02); +#227303 = AXIS2_PLACEMENT_3D('',#227304,#227305,#227306); +#227304 = CARTESIAN_POINT('',(155.05959745813,-57.92142839734,1.585)); +#227305 = DIRECTION('',(0.,0.,-1.)); +#227306 = DIRECTION('',(-0.997485495103,-7.0870918291E-02,-0.)); +#227307 = ORIENTED_EDGE('',*,*,#227308,.T.); +#227308 = EDGE_CURVE('',#227300,#227309,#227311,.T.); +#227309 = VERTEX_POINT('',#227310); +#227310 = CARTESIAN_POINT('',(155.980152,-58.159763,1.585)); +#227311 = LINE('',#227312,#227313); +#227312 = CARTESIAN_POINT('',(155.080152,-57.859764,1.585)); +#227313 = VECTOR('',#227314,1.); +#227314 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#227315 = ORIENTED_EDGE('',*,*,#227316,.T.); +#227316 = EDGE_CURVE('',#227309,#227317,#227319,.T.); +#227317 = VERTEX_POINT('',#227318); +#227318 = CARTESIAN_POINT('',(155.980152,-58.283093,1.585)); +#227319 = CIRCLE('',#227320,6.500111611217E-02); +#227320 = AXIS2_PLACEMENT_3D('',#227321,#227322,#227323); +#227321 = CARTESIAN_POINT('',(155.95959542268,-58.221428,1.585)); +#227322 = DIRECTION('',(0.,0.,-1.)); +#227323 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#227324 = ORIENTED_EDGE('',*,*,#227325,.T.); +#227325 = EDGE_CURVE('',#227317,#227326,#227328,.T.); +#227326 = VERTEX_POINT('',#227327); +#227327 = CARTESIAN_POINT('',(155.080152,-58.583092,1.585)); +#227328 = LINE('',#227329,#227330); +#227329 = CARTESIAN_POINT('',(155.980152,-58.283093,1.585)); +#227330 = VECTOR('',#227331,1.); +#227331 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#227332 = ORIENTED_EDGE('',*,*,#227333,.T.); +#227333 = EDGE_CURVE('',#227326,#227334,#227336,.T.); +#227334 = VERTEX_POINT('',#227335); +#227335 = CARTESIAN_POINT('',(155.039042,-58.459764,1.585)); +#227336 = CIRCLE('',#227337,6.499966862238E-02); +#227337 = AXIS2_PLACEMENT_3D('',#227338,#227339,#227340); +#227338 = CARTESIAN_POINT('',(155.05959712923,-58.52142795692,1.585)); +#227339 = DIRECTION('',(0.,0.,-1.)); +#227340 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#227341 = ORIENTED_EDGE('',*,*,#227342,.T.); +#227342 = EDGE_CURVE('',#227334,#227343,#227345,.T.); +#227343 = VERTEX_POINT('',#227344); +#227344 = CARTESIAN_POINT('',(155.75405,-58.221428,1.585)); +#227345 = LINE('',#227346,#227347); +#227346 = CARTESIAN_POINT('',(155.039042,-58.459764,1.585)); +#227347 = VECTOR('',#227348,1.); +#227348 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#227349 = ORIENTED_EDGE('',*,*,#227350,.T.); +#227350 = EDGE_CURVE('',#227343,#227351,#227353,.T.); +#227351 = VERTEX_POINT('',#227352); +#227352 = CARTESIAN_POINT('',(155.039042,-57.983092,1.585)); +#227353 = LINE('',#227354,#227355); +#227354 = CARTESIAN_POINT('',(155.75405,-58.221428,1.585)); +#227355 = VECTOR('',#227356,1.); +#227356 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#227357 = ORIENTED_EDGE('',*,*,#227358,.T.); +#227358 = EDGE_CURVE('',#227351,#227359,#227361,.T.); +#227359 = VERTEX_POINT('',#227360); +#227360 = CARTESIAN_POINT('',(155.017009,-57.970532,1.585)); +#227361 = LINE('',#227362,#227363); +#227362 = CARTESIAN_POINT('',(155.039042,-57.983092,1.585)); +#227363 = VECTOR('',#227364,1.); +#227364 = DIRECTION('',(-0.868757082859,0.495238458708,0.)); +#227365 = ORIENTED_EDGE('',*,*,#227366,.T.); +#227366 = EDGE_CURVE('',#227359,#227298,#227367,.T.); +#227367 = LINE('',#227368,#227369); +#227368 = CARTESIAN_POINT('',(155.017009,-57.970532,1.585)); +#227369 = VECTOR('',#227370,1.); +#227370 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#227371 = PLANE('',#227372); +#227372 = AXIS2_PLACEMENT_3D('',#227373,#227374,#227375); +#227373 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227374 = DIRECTION('',(0.,0.,1.)); +#227375 = DIRECTION('',(1.,0.,-0.)); +#227376 = SHELL_BASED_SURFACE_MODEL('',(#227377)); +#227377 = OPEN_SHELL('',(#227378)); +#227378 = ADVANCED_FACE('',(#227379,#227480),#227555,.T.); +#227379 = FACE_BOUND('',#227380,.F.); +#227380 = EDGE_LOOP('',(#227381,#227392,#227400,#227408,#227416,#227424, + #227432,#227441,#227449,#227458,#227466,#227474)); +#227381 = ORIENTED_EDGE('',*,*,#227382,.T.); +#227382 = EDGE_CURVE('',#227383,#227385,#227387,.T.); +#227383 = VERTEX_POINT('',#227384); +#227384 = CARTESIAN_POINT('',(152.50087,-57.983961,1.585)); +#227385 = VERTEX_POINT('',#227386); +#227386 = CARTESIAN_POINT('',(152.931693,-57.886552,1.585)); +#227387 = CIRCLE('',#227388,0.670538401945); +#227388 = AXIS2_PLACEMENT_3D('',#227389,#227390,#227391); +#227389 = CARTESIAN_POINT('',(152.85590657351,-58.55279382249,1.585)); +#227390 = DIRECTION('',(0.,0.,-1.)); +#227391 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#227392 = ORIENTED_EDGE('',*,*,#227393,.T.); +#227393 = EDGE_CURVE('',#227385,#227394,#227396,.T.); +#227394 = VERTEX_POINT('',#227395); +#227395 = CARTESIAN_POINT('',(153.12438,-57.934718,1.585)); +#227396 = LINE('',#227397,#227398); +#227397 = CARTESIAN_POINT('',(152.931693,-57.886552,1.585)); +#227398 = VECTOR('',#227399,1.); +#227399 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#227400 = ORIENTED_EDGE('',*,*,#227401,.T.); +#227401 = EDGE_CURVE('',#227394,#227402,#227404,.T.); +#227402 = VERTEX_POINT('',#227403); +#227403 = CARTESIAN_POINT('',(153.226987,-57.989751,1.585)); +#227404 = LINE('',#227405,#227406); +#227405 = CARTESIAN_POINT('',(153.12438,-57.934718,1.585)); +#227406 = VECTOR('',#227407,1.); +#227407 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#227408 = ORIENTED_EDGE('',*,*,#227409,.T.); +#227409 = EDGE_CURVE('',#227402,#227410,#227412,.T.); +#227410 = VERTEX_POINT('',#227411); +#227411 = CARTESIAN_POINT('',(153.320999,-58.087884,1.585)); +#227412 = LINE('',#227413,#227414); +#227413 = CARTESIAN_POINT('',(153.226987,-57.989751,1.585)); +#227414 = VECTOR('',#227415,1.); +#227415 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#227416 = ORIENTED_EDGE('',*,*,#227417,.T.); +#227417 = EDGE_CURVE('',#227410,#227418,#227420,.T.); +#227418 = VERTEX_POINT('',#227419); +#227419 = CARTESIAN_POINT('',(153.372563,-58.239776,1.585)); +#227420 = LINE('',#227421,#227422); +#227421 = CARTESIAN_POINT('',(153.320999,-58.087884,1.585)); +#227422 = VECTOR('',#227423,1.); +#227423 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#227424 = ORIENTED_EDGE('',*,*,#227425,.T.); +#227425 = EDGE_CURVE('',#227418,#227426,#227428,.T.); +#227426 = VERTEX_POINT('',#227427); +#227427 = CARTESIAN_POINT('',(153.374597,-58.464285,1.585)); +#227428 = LINE('',#227429,#227430); +#227429 = CARTESIAN_POINT('',(153.372563,-58.239776,1.585)); +#227430 = VECTOR('',#227431,1.); +#227431 = DIRECTION('',(9.059398644723E-03,-0.999958962806,0.)); +#227432 = ORIENTED_EDGE('',*,*,#227433,.T.); +#227433 = EDGE_CURVE('',#227426,#227434,#227436,.T.); +#227434 = VERTEX_POINT('',#227435); +#227435 = CARTESIAN_POINT('',(153.309597,-58.529285,1.585)); +#227436 = CIRCLE('',#227437,6.500103935382E-02); +#227437 = AXIS2_PLACEMENT_3D('',#227438,#227439,#227440); +#227438 = CARTESIAN_POINT('',(153.30959596065,-58.46428396065,1.585)); +#227439 = DIRECTION('',(0.,0.,-1.)); +#227440 = DIRECTION('',(0.999999999872,-1.59896755084E-05,0.)); +#227441 = ORIENTED_EDGE('',*,*,#227442,.T.); +#227442 = EDGE_CURVE('',#227434,#227443,#227445,.T.); +#227443 = VERTEX_POINT('',#227444); +#227444 = CARTESIAN_POINT('',(152.409597,-58.529285,1.585)); +#227445 = LINE('',#227446,#227447); +#227446 = CARTESIAN_POINT('',(153.309597,-58.529285,1.585)); +#227447 = VECTOR('',#227448,1.); +#227448 = DIRECTION('',(-1.,0.,0.)); +#227449 = ORIENTED_EDGE('',*,*,#227450,.T.); +#227450 = EDGE_CURVE('',#227443,#227451,#227453,.T.); +#227451 = VERTEX_POINT('',#227452); +#227452 = CARTESIAN_POINT('',(152.344597,-58.464285,1.585)); +#227453 = CIRCLE('',#227454,6.500103935389E-02); +#227454 = AXIS2_PLACEMENT_3D('',#227455,#227456,#227457); +#227455 = CARTESIAN_POINT('',(152.40959803934,-58.46428396065,1.585)); +#227456 = DIRECTION('',(0.,0.,-1.)); +#227457 = DIRECTION('',(-1.59896764922E-05,-0.999999999872,-0.)); +#227458 = ORIENTED_EDGE('',*,*,#227459,.T.); +#227459 = EDGE_CURVE('',#227451,#227460,#227462,.T.); +#227460 = VERTEX_POINT('',#227461); +#227461 = CARTESIAN_POINT('',(152.34663,-58.239776,1.585)); +#227462 = LINE('',#227463,#227464); +#227463 = CARTESIAN_POINT('',(152.344597,-58.464285,1.585)); +#227464 = VECTOR('',#227465,1.); +#227465 = DIRECTION('',(9.054945028507E-03,0.999959003145,0.)); +#227466 = ORIENTED_EDGE('',*,*,#227467,.T.); +#227467 = EDGE_CURVE('',#227460,#227468,#227470,.T.); +#227468 = VERTEX_POINT('',#227469); +#227469 = CARTESIAN_POINT('',(152.398191,-58.087888,1.585)); +#227470 = LINE('',#227471,#227472); +#227471 = CARTESIAN_POINT('',(152.34663,-58.239776,1.585)); +#227472 = VECTOR('',#227473,1.); +#227473 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#227474 = ORIENTED_EDGE('',*,*,#227475,.T.); +#227475 = EDGE_CURVE('',#227468,#227383,#227476,.T.); +#227476 = LINE('',#227477,#227478); +#227477 = CARTESIAN_POINT('',(152.398191,-58.087888,1.585)); +#227478 = VECTOR('',#227479,1.); +#227479 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#227480 = FACE_BOUND('',#227481,.F.); +#227481 = EDGE_LOOP('',(#227482,#227493,#227501,#227509,#227517,#227525, + #227533,#227541,#227549)); +#227482 = ORIENTED_EDGE('',*,*,#227483,.T.); +#227483 = EDGE_CURVE('',#227484,#227486,#227488,.T.); +#227484 = VERTEX_POINT('',#227485); +#227485 = CARTESIAN_POINT('',(153.072622,-58.054184,1.585)); +#227486 = VERTEX_POINT('',#227487); +#227487 = CARTESIAN_POINT('',(152.576669,-58.089134,1.585)); +#227488 = CIRCLE('',#227489,0.559258743581); +#227489 = AXIS2_PLACEMENT_3D('',#227490,#227491,#227492); +#227490 = CARTESIAN_POINT('',(152.85986183298,-58.57139136035,1.585)); +#227491 = DIRECTION('',(0.,0.,1.)); +#227492 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#227493 = ORIENTED_EDGE('',*,*,#227494,.T.); +#227494 = EDGE_CURVE('',#227486,#227495,#227497,.T.); +#227495 = VERTEX_POINT('',#227496); +#227496 = CARTESIAN_POINT('',(152.509265,-58.15654,1.585)); +#227497 = LINE('',#227498,#227499); +#227498 = CARTESIAN_POINT('',(152.576669,-58.089134,1.585)); +#227499 = VECTOR('',#227500,1.); +#227500 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#227501 = ORIENTED_EDGE('',*,*,#227502,.T.); +#227502 = EDGE_CURVE('',#227495,#227503,#227505,.T.); +#227503 = VERTEX_POINT('',#227504); +#227504 = CARTESIAN_POINT('',(152.474597,-58.260546,1.585)); +#227505 = LINE('',#227506,#227507); +#227506 = CARTESIAN_POINT('',(152.509265,-58.15654,1.585)); +#227507 = VECTOR('',#227508,1.); +#227508 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#227509 = ORIENTED_EDGE('',*,*,#227510,.T.); +#227510 = EDGE_CURVE('',#227503,#227511,#227513,.T.); +#227511 = VERTEX_POINT('',#227512); +#227512 = CARTESIAN_POINT('',(152.474597,-58.399285,1.585)); +#227513 = LINE('',#227514,#227515); +#227514 = CARTESIAN_POINT('',(152.474597,-58.260546,1.585)); +#227515 = VECTOR('',#227516,1.); +#227516 = DIRECTION('',(0.,-1.,0.)); +#227517 = ORIENTED_EDGE('',*,*,#227518,.T.); +#227518 = EDGE_CURVE('',#227511,#227519,#227521,.T.); +#227519 = VERTEX_POINT('',#227520); +#227520 = CARTESIAN_POINT('',(153.244597,-58.399285,1.585)); +#227521 = LINE('',#227522,#227523); +#227522 = CARTESIAN_POINT('',(152.474597,-58.399285,1.585)); +#227523 = VECTOR('',#227524,1.); +#227524 = DIRECTION('',(1.,0.,0.)); +#227525 = ORIENTED_EDGE('',*,*,#227526,.T.); +#227526 = EDGE_CURVE('',#227519,#227527,#227529,.T.); +#227527 = VERTEX_POINT('',#227528); +#227528 = CARTESIAN_POINT('',(153.244597,-58.260546,1.585)); +#227529 = LINE('',#227530,#227531); +#227530 = CARTESIAN_POINT('',(153.244597,-58.399285,1.585)); +#227531 = VECTOR('',#227532,1.); +#227532 = DIRECTION('',(0.,1.,0.)); +#227533 = ORIENTED_EDGE('',*,*,#227534,.T.); +#227534 = EDGE_CURVE('',#227527,#227535,#227537,.T.); +#227535 = VERTEX_POINT('',#227536); +#227536 = CARTESIAN_POINT('',(153.209928,-58.15654,1.585)); +#227537 = LINE('',#227538,#227539); +#227538 = CARTESIAN_POINT('',(153.244597,-58.260546,1.585)); +#227539 = VECTOR('',#227540,1.); +#227540 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#227541 = ORIENTED_EDGE('',*,*,#227542,.T.); +#227542 = EDGE_CURVE('',#227535,#227543,#227545,.T.); +#227543 = VERTEX_POINT('',#227544); +#227544 = CARTESIAN_POINT('',(153.142522,-58.089134,1.585)); +#227545 = LINE('',#227546,#227547); +#227546 = CARTESIAN_POINT('',(153.209928,-58.15654,1.585)); +#227547 = VECTOR('',#227548,1.); +#227548 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#227549 = ORIENTED_EDGE('',*,*,#227550,.T.); +#227550 = EDGE_CURVE('',#227543,#227484,#227551,.T.); +#227551 = LINE('',#227552,#227553); +#227552 = CARTESIAN_POINT('',(153.142522,-58.089134,1.585)); +#227553 = VECTOR('',#227554,1.); +#227554 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#227555 = PLANE('',#227556); +#227556 = AXIS2_PLACEMENT_3D('',#227557,#227558,#227559); +#227557 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227558 = DIRECTION('',(0.,0.,1.)); +#227559 = DIRECTION('',(1.,0.,-0.)); +#227560 = SHELL_BASED_SURFACE_MODEL('',(#227561)); +#227561 = OPEN_SHELL('',(#227562)); +#227562 = ADVANCED_FACE('',(#227563),#227697,.T.); +#227563 = FACE_BOUND('',#227564,.F.); +#227564 = EDGE_LOOP('',(#227565,#227575,#227583,#227592,#227600,#227608, + #227617,#227625,#227634,#227642,#227650,#227658,#227666,#227675, + #227683,#227691)); +#227565 = ORIENTED_EDGE('',*,*,#227566,.T.); +#227566 = EDGE_CURVE('',#227567,#227569,#227571,.T.); +#227567 = VERTEX_POINT('',#227568); +#227568 = CARTESIAN_POINT('',(164.313562,-57.294941,1.585)); +#227569 = VERTEX_POINT('',#227570); +#227570 = CARTESIAN_POINT('',(164.352018,-57.27436,1.585)); +#227571 = LINE('',#227572,#227573); +#227572 = CARTESIAN_POINT('',(164.313562,-57.294941,1.585)); +#227573 = VECTOR('',#227574,1.); +#227574 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#227575 = ORIENTED_EDGE('',*,*,#227576,.T.); +#227576 = EDGE_CURVE('',#227569,#227577,#227579,.T.); +#227577 = VERTEX_POINT('',#227578); +#227578 = CARTESIAN_POINT('',(164.373855,-57.27436,1.585)); +#227579 = LINE('',#227580,#227581); +#227580 = CARTESIAN_POINT('',(164.352018,-57.27436,1.585)); +#227581 = VECTOR('',#227582,1.); +#227582 = DIRECTION('',(1.,0.,0.)); +#227583 = ORIENTED_EDGE('',*,*,#227584,.T.); +#227584 = EDGE_CURVE('',#227577,#227585,#227587,.T.); +#227585 = VERTEX_POINT('',#227586); +#227586 = CARTESIAN_POINT('',(164.44165,-57.347919,1.585)); +#227587 = CIRCLE('',#227588,7.216898094226E-02); +#227588 = AXIS2_PLACEMENT_3D('',#227589,#227590,#227591); +#227589 = CARTESIAN_POINT('',(164.36949706389,-57.34639728342,1.585)); +#227590 = DIRECTION('',(0.,0.,-1.)); +#227591 = DIRECTION('',(6.038516895227E-02,0.998175150648,0.)); +#227592 = ORIENTED_EDGE('',*,*,#227593,.T.); +#227593 = EDGE_CURVE('',#227585,#227594,#227596,.T.); +#227594 = VERTEX_POINT('',#227595); +#227595 = CARTESIAN_POINT('',(164.44165,-58.272919,1.585)); +#227596 = LINE('',#227597,#227598); +#227597 = CARTESIAN_POINT('',(164.44165,-57.347919,1.585)); +#227598 = VECTOR('',#227599,1.); +#227599 = DIRECTION('',(0.,-1.,0.)); +#227600 = ORIENTED_EDGE('',*,*,#227601,.T.); +#227601 = EDGE_CURVE('',#227594,#227602,#227604,.T.); +#227602 = VERTEX_POINT('',#227603); +#227603 = CARTESIAN_POINT('',(164.666996,-58.27436,1.585)); +#227604 = LINE('',#227605,#227606); +#227605 = CARTESIAN_POINT('',(164.44165,-58.272919,1.585)); +#227606 = VECTOR('',#227607,1.); +#227607 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#227608 = ORIENTED_EDGE('',*,*,#227609,.T.); +#227609 = EDGE_CURVE('',#227602,#227610,#227612,.T.); +#227610 = VERTEX_POINT('',#227611); +#227611 = CARTESIAN_POINT('',(164.652364,-58.422919,1.585)); +#227612 = CIRCLE('',#227613,7.500006711464E-02); +#227613 = AXIS2_PLACEMENT_3D('',#227614,#227615,#227616); +#227614 = CARTESIAN_POINT('',(164.65236406711,-58.34791893288,1.585)); +#227615 = DIRECTION('',(0.,0.,-1.)); +#227616 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227617 = ORIENTED_EDGE('',*,*,#227618,.T.); +#227618 = EDGE_CURVE('',#227610,#227619,#227621,.T.); +#227619 = VERTEX_POINT('',#227620); +#227620 = CARTESIAN_POINT('',(164.066304,-58.421478,1.585)); +#227621 = LINE('',#227622,#227623); +#227622 = CARTESIAN_POINT('',(164.652364,-58.422919,1.585)); +#227623 = VECTOR('',#227624,1.); +#227624 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#227625 = ORIENTED_EDGE('',*,*,#227626,.T.); +#227626 = EDGE_CURVE('',#227619,#227627,#227629,.T.); +#227627 = VERTEX_POINT('',#227628); +#227628 = CARTESIAN_POINT('',(164.080936,-58.272919,1.585)); +#227629 = CIRCLE('',#227630,7.500006711464E-02); +#227630 = AXIS2_PLACEMENT_3D('',#227631,#227632,#227633); +#227631 = CARTESIAN_POINT('',(164.08093593288,-58.34791906711,1.585)); +#227632 = DIRECTION('',(0.,0.,-1.)); +#227633 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#227634 = ORIENTED_EDGE('',*,*,#227635,.T.); +#227635 = EDGE_CURVE('',#227627,#227636,#227638,.T.); +#227636 = VERTEX_POINT('',#227637); +#227637 = CARTESIAN_POINT('',(164.29165,-58.272919,1.585)); +#227638 = LINE('',#227639,#227640); +#227639 = CARTESIAN_POINT('',(164.080936,-58.272919,1.585)); +#227640 = VECTOR('',#227641,1.); +#227641 = DIRECTION('',(1.,0.,0.)); +#227642 = ORIENTED_EDGE('',*,*,#227643,.T.); +#227643 = EDGE_CURVE('',#227636,#227644,#227646,.T.); +#227644 = VERTEX_POINT('',#227645); +#227645 = CARTESIAN_POINT('',(164.29165,-57.576604,1.585)); +#227646 = LINE('',#227647,#227648); +#227647 = CARTESIAN_POINT('',(164.29165,-58.272919,1.585)); +#227648 = VECTOR('',#227649,1.); +#227649 = DIRECTION('',(0.,1.,0.)); +#227650 = ORIENTED_EDGE('',*,*,#227651,.T.); +#227651 = EDGE_CURVE('',#227644,#227652,#227654,.T.); +#227652 = VERTEX_POINT('',#227653); +#227653 = CARTESIAN_POINT('',(164.216014,-57.649131,1.585)); +#227654 = LINE('',#227655,#227656); +#227655 = CARTESIAN_POINT('',(164.29165,-57.576604,1.585)); +#227656 = VECTOR('',#227657,1.); +#227657 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#227658 = ORIENTED_EDGE('',*,*,#227659,.T.); +#227659 = EDGE_CURVE('',#227652,#227660,#227662,.T.); +#227660 = VERTEX_POINT('',#227661); +#227661 = CARTESIAN_POINT('',(164.100745,-57.70597,1.585)); +#227662 = LINE('',#227663,#227664); +#227663 = CARTESIAN_POINT('',(164.216014,-57.649131,1.585)); +#227664 = VECTOR('',#227665,1.); +#227665 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#227666 = ORIENTED_EDGE('',*,*,#227667,.T.); +#227667 = EDGE_CURVE('',#227660,#227668,#227670,.T.); +#227668 = VERTEX_POINT('',#227669); +#227669 = CARTESIAN_POINT('',(164.047395,-57.566551,1.585)); +#227670 = CIRCLE('',#227671,7.500005272362E-02); +#227671 = AXIS2_PLACEMENT_3D('',#227672,#227673,#227674); +#227672 = CARTESIAN_POINT('',(164.08093555676,-57.63363332972,1.585)); +#227673 = DIRECTION('',(0.,0.,-1.)); +#227674 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#227675 = ORIENTED_EDGE('',*,*,#227676,.T.); +#227676 = EDGE_CURVE('',#227668,#227677,#227679,.T.); +#227677 = VERTEX_POINT('',#227678); +#227678 = CARTESIAN_POINT('',(164.131747,-57.524375,1.585)); +#227679 = LINE('',#227680,#227681); +#227680 = CARTESIAN_POINT('',(164.047395,-57.566551,1.585)); +#227681 = VECTOR('',#227682,1.); +#227682 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#227683 = ORIENTED_EDGE('',*,*,#227684,.T.); +#227684 = EDGE_CURVE('',#227677,#227685,#227687,.T.); +#227685 = VERTEX_POINT('',#227686); +#227686 = CARTESIAN_POINT('',(164.213126,-57.442996,1.585)); +#227687 = LINE('',#227688,#227689); +#227688 = CARTESIAN_POINT('',(164.131747,-57.524375,1.585)); +#227689 = VECTOR('',#227690,1.); +#227690 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#227691 = ORIENTED_EDGE('',*,*,#227692,.T.); +#227692 = EDGE_CURVE('',#227685,#227567,#227693,.T.); +#227693 = LINE('',#227694,#227695); +#227694 = CARTESIAN_POINT('',(164.213126,-57.442996,1.585)); +#227695 = VECTOR('',#227696,1.); +#227696 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#227697 = PLANE('',#227698); +#227698 = AXIS2_PLACEMENT_3D('',#227699,#227700,#227701); +#227699 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227700 = DIRECTION('',(0.,0.,1.)); +#227701 = DIRECTION('',(1.,0.,-0.)); +#227702 = SHELL_BASED_SURFACE_MODEL('',(#227703)); +#227703 = OPEN_SHELL('',(#227704)); +#227704 = ADVANCED_FACE('',(#227705),#227864,.T.); +#227705 = FACE_BOUND('',#227706,.F.); +#227706 = EDGE_LOOP('',(#227707,#227718,#227726,#227734,#227742,#227750, + #227758,#227766,#227775,#227783,#227792,#227800,#227808,#227816, + #227825,#227833,#227841,#227849,#227858)); +#227707 = ORIENTED_EDGE('',*,*,#227708,.T.); +#227708 = EDGE_CURVE('',#227709,#227711,#227713,.T.); +#227709 = VERTEX_POINT('',#227710); +#227710 = CARTESIAN_POINT('',(167.595014,-57.328456,1.585)); +#227711 = VERTEX_POINT('',#227712); +#227712 = CARTESIAN_POINT('',(168.104409,-57.337786,1.585)); +#227713 = CIRCLE('',#227714,0.450326844012); +#227714 = AXIS2_PLACEMENT_3D('',#227715,#227716,#227717); +#227715 = CARTESIAN_POINT('',(167.8429110301,-57.70440989199,1.585)); +#227716 = DIRECTION('',(0.,0.,-1.)); +#227717 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#227718 = ORIENTED_EDGE('',*,*,#227719,.T.); +#227719 = EDGE_CURVE('',#227711,#227720,#227722,.T.); +#227720 = VERTEX_POINT('',#227721); +#227721 = CARTESIAN_POINT('',(168.167862,-57.403316,1.585)); +#227722 = LINE('',#227723,#227724); +#227723 = CARTESIAN_POINT('',(168.104409,-57.337786,1.585)); +#227724 = VECTOR('',#227725,1.); +#227725 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#227726 = ORIENTED_EDGE('',*,*,#227727,.T.); +#227727 = EDGE_CURVE('',#227720,#227728,#227730,.T.); +#227728 = VERTEX_POINT('',#227729); +#227729 = CARTESIAN_POINT('',(168.225923,-57.523763,1.585)); +#227730 = LINE('',#227731,#227732); +#227731 = CARTESIAN_POINT('',(168.167862,-57.403316,1.585)); +#227732 = VECTOR('',#227733,1.); +#227733 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#227734 = ORIENTED_EDGE('',*,*,#227735,.T.); +#227735 = EDGE_CURVE('',#227728,#227736,#227738,.T.); +#227736 = VERTEX_POINT('',#227737); +#227737 = CARTESIAN_POINT('',(168.225164,-57.650095,1.585)); +#227738 = LINE('',#227739,#227740); +#227739 = CARTESIAN_POINT('',(168.225923,-57.523763,1.585)); +#227740 = VECTOR('',#227741,1.); +#227741 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#227742 = ORIENTED_EDGE('',*,*,#227743,.T.); +#227743 = EDGE_CURVE('',#227736,#227744,#227746,.T.); +#227744 = VERTEX_POINT('',#227745); +#227745 = CARTESIAN_POINT('',(168.167106,-57.818158,1.585)); +#227746 = LINE('',#227747,#227748); +#227747 = CARTESIAN_POINT('',(168.225164,-57.650095,1.585)); +#227748 = VECTOR('',#227749,1.); +#227749 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#227750 = ORIENTED_EDGE('',*,*,#227751,.T.); +#227751 = EDGE_CURVE('',#227744,#227752,#227754,.T.); +#227752 = VERTEX_POINT('',#227753); +#227753 = CARTESIAN_POINT('',(167.714383,-58.272919,1.585)); +#227754 = LINE('',#227755,#227756); +#227755 = CARTESIAN_POINT('',(168.167106,-57.818158,1.585)); +#227756 = VECTOR('',#227757,1.); +#227757 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#227758 = ORIENTED_EDGE('',*,*,#227759,.T.); +#227759 = EDGE_CURVE('',#227752,#227760,#227762,.T.); +#227760 = VERTEX_POINT('',#227761); +#227761 = CARTESIAN_POINT('',(168.166996,-58.27436,1.585)); +#227762 = LINE('',#227763,#227764); +#227763 = CARTESIAN_POINT('',(167.714383,-58.272919,1.585)); +#227764 = VECTOR('',#227765,1.); +#227765 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#227766 = ORIENTED_EDGE('',*,*,#227767,.T.); +#227767 = EDGE_CURVE('',#227760,#227768,#227770,.T.); +#227768 = VERTEX_POINT('',#227769); +#227769 = CARTESIAN_POINT('',(168.152364,-58.422919,1.585)); +#227770 = CIRCLE('',#227771,7.500006711464E-02); +#227771 = AXIS2_PLACEMENT_3D('',#227772,#227773,#227774); +#227772 = CARTESIAN_POINT('',(168.15236406711,-58.34791893288,1.585)); +#227773 = DIRECTION('',(0.,0.,-1.)); +#227774 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227775 = ORIENTED_EDGE('',*,*,#227776,.T.); +#227776 = EDGE_CURVE('',#227768,#227777,#227779,.T.); +#227777 = VERTEX_POINT('',#227778); +#227778 = CARTESIAN_POINT('',(167.518685,-58.421478,1.585)); +#227779 = LINE('',#227780,#227781); +#227780 = CARTESIAN_POINT('',(168.152364,-58.422919,1.585)); +#227781 = VECTOR('',#227782,1.); +#227782 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#227783 = ORIENTED_EDGE('',*,*,#227784,.T.); +#227784 = EDGE_CURVE('',#227777,#227785,#227787,.T.); +#227785 = VERTEX_POINT('',#227786); +#227786 = CARTESIAN_POINT('',(167.480284,-58.294886,1.585)); +#227787 = CIRCLE('',#227788,7.500021013109E-02); +#227788 = AXIS2_PLACEMENT_3D('',#227789,#227790,#227791); +#227789 = CARTESIAN_POINT('',(167.5333173167,-58.34791899764,1.585)); +#227790 = DIRECTION('',(0.,0.,-1.)); +#227791 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#227792 = ORIENTED_EDGE('',*,*,#227793,.T.); +#227793 = EDGE_CURVE('',#227785,#227794,#227796,.T.); +#227794 = VERTEX_POINT('',#227795); +#227795 = CARTESIAN_POINT('',(168.039192,-57.735976,1.585)); +#227796 = LINE('',#227797,#227798); +#227797 = CARTESIAN_POINT('',(167.480284,-58.294886,1.585)); +#227798 = VECTOR('',#227799,1.); +#227799 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#227800 = ORIENTED_EDGE('',*,*,#227801,.T.); +#227801 = EDGE_CURVE('',#227794,#227802,#227804,.T.); +#227802 = VERTEX_POINT('',#227803); +#227803 = CARTESIAN_POINT('',(168.077364,-57.621463,1.585)); +#227804 = LINE('',#227805,#227806); +#227805 = CARTESIAN_POINT('',(168.039192,-57.735976,1.585)); +#227806 = VECTOR('',#227807,1.); +#227807 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#227808 = ORIENTED_EDGE('',*,*,#227809,.T.); +#227809 = EDGE_CURVE('',#227802,#227810,#227812,.T.); +#227810 = VERTEX_POINT('',#227811); +#227811 = CARTESIAN_POINT('',(168.077364,-57.5561,1.585)); +#227812 = LINE('',#227813,#227814); +#227813 = CARTESIAN_POINT('',(168.077364,-57.621463,1.585)); +#227814 = VECTOR('',#227815,1.); +#227815 = DIRECTION('',(0.,1.,0.)); +#227816 = ORIENTED_EDGE('',*,*,#227817,.T.); +#227817 = EDGE_CURVE('',#227810,#227818,#227820,.T.); +#227818 = VERTEX_POINT('',#227819); +#227819 = CARTESIAN_POINT('',(167.944183,-57.422919,1.585)); +#227820 = CIRCLE('',#227821,0.18686440374); +#227821 = AXIS2_PLACEMENT_3D('',#227822,#227823,#227824); +#227822 = CARTESIAN_POINT('',(167.896647,-57.603636,1.585)); +#227823 = DIRECTION('',(0.,0.,1.)); +#227824 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#227825 = ORIENTED_EDGE('',*,*,#227826,.T.); +#227826 = EDGE_CURVE('',#227818,#227827,#227829,.T.); +#227827 = VERTEX_POINT('',#227828); +#227828 = CARTESIAN_POINT('',(167.741498,-57.422919,1.585)); +#227829 = LINE('',#227830,#227831); +#227830 = CARTESIAN_POINT('',(167.944183,-57.422919,1.585)); +#227831 = VECTOR('',#227832,1.); +#227832 = DIRECTION('',(-1.,0.,0.)); +#227833 = ORIENTED_EDGE('',*,*,#227834,.T.); +#227834 = EDGE_CURVE('',#227827,#227835,#227837,.T.); +#227835 = VERTEX_POINT('',#227836); +#227836 = CARTESIAN_POINT('',(167.672982,-57.457177,1.585)); +#227837 = LINE('',#227838,#227839); +#227838 = CARTESIAN_POINT('',(167.741498,-57.422919,1.585)); +#227839 = VECTOR('',#227840,1.); +#227840 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#227841 = ORIENTED_EDGE('',*,*,#227842,.T.); +#227842 = EDGE_CURVE('',#227835,#227843,#227845,.T.); +#227843 = VERTEX_POINT('',#227844); +#227844 = CARTESIAN_POINT('',(167.622604,-57.505517,1.585)); +#227845 = LINE('',#227846,#227847); +#227846 = CARTESIAN_POINT('',(167.672982,-57.457177,1.585)); +#227847 = VECTOR('',#227848,1.); +#227848 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#227849 = ORIENTED_EDGE('',*,*,#227850,.T.); +#227850 = EDGE_CURVE('',#227843,#227851,#227853,.T.); +#227851 = VERTEX_POINT('',#227852); +#227852 = CARTESIAN_POINT('',(167.527903,-57.390124,1.585)); +#227853 = CIRCLE('',#227854,7.499996838527E-02); +#227854 = AXIS2_PLACEMENT_3D('',#227855,#227856,#227857); +#227855 = CARTESIAN_POINT('',(167.580936,-57.44315697246,1.585)); +#227856 = DIRECTION('',(0.,0.,-1.)); +#227857 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#227858 = ORIENTED_EDGE('',*,*,#227859,.T.); +#227859 = EDGE_CURVE('',#227851,#227709,#227860,.T.); +#227860 = LINE('',#227861,#227862); +#227861 = CARTESIAN_POINT('',(167.527903,-57.390124,1.585)); +#227862 = VECTOR('',#227863,1.); +#227863 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#227864 = PLANE('',#227865); +#227865 = AXIS2_PLACEMENT_3D('',#227866,#227867,#227868); +#227866 = CARTESIAN_POINT('',(0.,0.,1.585)); +#227867 = DIRECTION('',(0.,0.,1.)); +#227868 = DIRECTION('',(1.,0.,-0.)); +#227869 = SHELL_BASED_SURFACE_MODEL('',(#227870)); +#227870 = OPEN_SHELL('',(#227871)); +#227871 = ADVANCED_FACE('',(#227872),#228006,.T.); +#227872 = FACE_BOUND('',#227873,.F.); +#227873 = EDGE_LOOP('',(#227874,#227884,#227892,#227901,#227909,#227917, + #227926,#227934,#227943,#227951,#227959,#227967,#227975,#227984, + #227992,#228000)); +#227874 = ORIENTED_EDGE('',*,*,#227875,.T.); +#227875 = EDGE_CURVE('',#227876,#227878,#227880,.T.); +#227876 = VERTEX_POINT('',#227877); +#227877 = CARTESIAN_POINT('',(175.519514,-57.294941,1.585)); +#227878 = VERTEX_POINT('',#227879); +#227879 = CARTESIAN_POINT('',(175.55797,-57.27436,1.585)); +#227880 = LINE('',#227881,#227882); +#227881 = CARTESIAN_POINT('',(175.519514,-57.294941,1.585)); +#227882 = VECTOR('',#227883,1.); +#227883 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#227884 = ORIENTED_EDGE('',*,*,#227885,.T.); +#227885 = EDGE_CURVE('',#227878,#227886,#227888,.T.); +#227886 = VERTEX_POINT('',#227887); +#227887 = CARTESIAN_POINT('',(175.579807,-57.27436,1.585)); +#227888 = LINE('',#227889,#227890); +#227889 = CARTESIAN_POINT('',(175.55797,-57.27436,1.585)); +#227890 = VECTOR('',#227891,1.); +#227891 = DIRECTION('',(1.,0.,0.)); +#227892 = ORIENTED_EDGE('',*,*,#227893,.T.); +#227893 = EDGE_CURVE('',#227886,#227894,#227896,.T.); +#227894 = VERTEX_POINT('',#227895); +#227895 = CARTESIAN_POINT('',(175.647602,-57.347919,1.585)); +#227896 = CIRCLE('',#227897,7.216898094227E-02); +#227897 = AXIS2_PLACEMENT_3D('',#227898,#227899,#227900); +#227898 = CARTESIAN_POINT('',(175.57544906389,-57.34639728342,1.585)); +#227899 = DIRECTION('',(0.,0.,-1.)); +#227900 = DIRECTION('',(6.038516895226E-02,0.998175150648,0.)); +#227901 = ORIENTED_EDGE('',*,*,#227902,.T.); +#227902 = EDGE_CURVE('',#227894,#227903,#227905,.T.); +#227903 = VERTEX_POINT('',#227904); +#227904 = CARTESIAN_POINT('',(175.647602,-58.272919,1.585)); +#227905 = LINE('',#227906,#227907); +#227906 = CARTESIAN_POINT('',(175.647602,-57.347919,1.585)); +#227907 = VECTOR('',#227908,1.); +#227908 = DIRECTION('',(0.,-1.,0.)); +#227909 = ORIENTED_EDGE('',*,*,#227910,.T.); +#227910 = EDGE_CURVE('',#227903,#227911,#227913,.T.); +#227911 = VERTEX_POINT('',#227912); +#227912 = CARTESIAN_POINT('',(175.872948,-58.27436,1.585)); +#227913 = LINE('',#227914,#227915); +#227914 = CARTESIAN_POINT('',(175.647602,-58.272919,1.585)); +#227915 = VECTOR('',#227916,1.); +#227916 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#227917 = ORIENTED_EDGE('',*,*,#227918,.T.); +#227918 = EDGE_CURVE('',#227911,#227919,#227921,.T.); +#227919 = VERTEX_POINT('',#227920); +#227920 = CARTESIAN_POINT('',(175.858316,-58.422919,1.585)); +#227921 = CIRCLE('',#227922,7.500006711464E-02); +#227922 = AXIS2_PLACEMENT_3D('',#227923,#227924,#227925); +#227923 = CARTESIAN_POINT('',(175.85831606711,-58.34791893288,1.585)); +#227924 = DIRECTION('',(0.,0.,-1.)); +#227925 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#227926 = ORIENTED_EDGE('',*,*,#227927,.T.); +#227927 = EDGE_CURVE('',#227919,#227928,#227930,.T.); +#227928 = VERTEX_POINT('',#227929); +#227929 = CARTESIAN_POINT('',(175.272256,-58.421478,1.585)); +#227930 = LINE('',#227931,#227932); +#227931 = CARTESIAN_POINT('',(175.858316,-58.422919,1.585)); +#227932 = VECTOR('',#227933,1.); +#227933 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#227934 = ORIENTED_EDGE('',*,*,#227935,.T.); +#227935 = EDGE_CURVE('',#227928,#227936,#227938,.T.); +#227936 = VERTEX_POINT('',#227937); +#227937 = CARTESIAN_POINT('',(175.286888,-58.272919,1.585)); +#227938 = CIRCLE('',#227939,7.500006711465E-02); +#227939 = AXIS2_PLACEMENT_3D('',#227940,#227941,#227942); +#227940 = CARTESIAN_POINT('',(175.28688793288,-58.34791906711,1.585)); +#227941 = DIRECTION('',(0.,0.,-1.)); +#227942 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#227943 = ORIENTED_EDGE('',*,*,#227944,.T.); +#227944 = EDGE_CURVE('',#227936,#227945,#227947,.T.); +#227945 = VERTEX_POINT('',#227946); +#227946 = CARTESIAN_POINT('',(175.497602,-58.272919,1.585)); +#227947 = LINE('',#227948,#227949); +#227948 = CARTESIAN_POINT('',(175.286888,-58.272919,1.585)); +#227949 = VECTOR('',#227950,1.); +#227950 = DIRECTION('',(1.,0.,0.)); +#227951 = ORIENTED_EDGE('',*,*,#227952,.T.); +#227952 = EDGE_CURVE('',#227945,#227953,#227955,.T.); +#227953 = VERTEX_POINT('',#227954); +#227954 = CARTESIAN_POINT('',(175.497602,-57.576604,1.585)); +#227955 = LINE('',#227956,#227957); +#227956 = CARTESIAN_POINT('',(175.497602,-58.272919,1.585)); +#227957 = VECTOR('',#227958,1.); +#227958 = DIRECTION('',(0.,1.,0.)); +#227959 = ORIENTED_EDGE('',*,*,#227960,.T.); +#227960 = EDGE_CURVE('',#227953,#227961,#227963,.T.); +#227961 = VERTEX_POINT('',#227962); +#227962 = CARTESIAN_POINT('',(175.421966,-57.649131,1.585)); +#227963 = LINE('',#227964,#227965); +#227964 = CARTESIAN_POINT('',(175.497602,-57.576604,1.585)); +#227965 = VECTOR('',#227966,1.); +#227966 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#227967 = ORIENTED_EDGE('',*,*,#227968,.T.); +#227968 = EDGE_CURVE('',#227961,#227969,#227971,.T.); +#227969 = VERTEX_POINT('',#227970); +#227970 = CARTESIAN_POINT('',(175.306697,-57.70597,1.585)); +#227971 = LINE('',#227972,#227973); +#227972 = CARTESIAN_POINT('',(175.421966,-57.649131,1.585)); +#227973 = VECTOR('',#227974,1.); +#227974 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#227975 = ORIENTED_EDGE('',*,*,#227976,.T.); +#227976 = EDGE_CURVE('',#227969,#227977,#227979,.T.); +#227977 = VERTEX_POINT('',#227978); +#227978 = CARTESIAN_POINT('',(175.253347,-57.566551,1.585)); +#227979 = CIRCLE('',#227980,7.500005272363E-02); +#227980 = AXIS2_PLACEMENT_3D('',#227981,#227982,#227983); +#227981 = CARTESIAN_POINT('',(175.28688755676,-57.63363332972,1.585)); +#227982 = DIRECTION('',(0.,0.,-1.)); +#227983 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#227984 = ORIENTED_EDGE('',*,*,#227985,.T.); +#227985 = EDGE_CURVE('',#227977,#227986,#227988,.T.); +#227986 = VERTEX_POINT('',#227987); +#227987 = CARTESIAN_POINT('',(175.337699,-57.524375,1.585)); +#227988 = LINE('',#227989,#227990); +#227989 = CARTESIAN_POINT('',(175.253347,-57.566551,1.585)); +#227990 = VECTOR('',#227991,1.); +#227991 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#227992 = ORIENTED_EDGE('',*,*,#227993,.T.); +#227993 = EDGE_CURVE('',#227986,#227994,#227996,.T.); +#227994 = VERTEX_POINT('',#227995); +#227995 = CARTESIAN_POINT('',(175.419078,-57.442996,1.585)); +#227996 = LINE('',#227997,#227998); +#227997 = CARTESIAN_POINT('',(175.337699,-57.524375,1.585)); +#227998 = VECTOR('',#227999,1.); +#227999 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#228000 = ORIENTED_EDGE('',*,*,#228001,.T.); +#228001 = EDGE_CURVE('',#227994,#227876,#228002,.T.); +#228002 = LINE('',#228003,#228004); +#228003 = CARTESIAN_POINT('',(175.419078,-57.442996,1.585)); +#228004 = VECTOR('',#228005,1.); +#228005 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#228006 = PLANE('',#228007); +#228007 = AXIS2_PLACEMENT_3D('',#228008,#228009,#228010); +#228008 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228009 = DIRECTION('',(0.,0.,1.)); +#228010 = DIRECTION('',(1.,0.,-0.)); +#228011 = SHELL_BASED_SURFACE_MODEL('',(#228012)); +#228012 = OPEN_SHELL('',(#228013)); +#228013 = ADVANCED_FACE('',(#228014),#228173,.T.); +#228014 = FACE_BOUND('',#228015,.F.); +#228015 = EDGE_LOOP('',(#228016,#228027,#228035,#228043,#228051,#228059, + #228067,#228075,#228084,#228092,#228101,#228109,#228117,#228125, + #228134,#228142,#228150,#228158,#228167)); +#228016 = ORIENTED_EDGE('',*,*,#228017,.T.); +#228017 = EDGE_CURVE('',#228018,#228020,#228022,.T.); +#228018 = VERTEX_POINT('',#228019); +#228019 = CARTESIAN_POINT('',(179.300966,-57.328456,1.585)); +#228020 = VERTEX_POINT('',#228021); +#228021 = CARTESIAN_POINT('',(179.810361,-57.337786,1.585)); +#228022 = CIRCLE('',#228023,0.450326844012); +#228023 = AXIS2_PLACEMENT_3D('',#228024,#228025,#228026); +#228024 = CARTESIAN_POINT('',(179.5488630301,-57.70440989199,1.585)); +#228025 = DIRECTION('',(0.,0.,-1.)); +#228026 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#228027 = ORIENTED_EDGE('',*,*,#228028,.T.); +#228028 = EDGE_CURVE('',#228020,#228029,#228031,.T.); +#228029 = VERTEX_POINT('',#228030); +#228030 = CARTESIAN_POINT('',(179.873814,-57.403316,1.585)); +#228031 = LINE('',#228032,#228033); +#228032 = CARTESIAN_POINT('',(179.810361,-57.337786,1.585)); +#228033 = VECTOR('',#228034,1.); +#228034 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#228035 = ORIENTED_EDGE('',*,*,#228036,.T.); +#228036 = EDGE_CURVE('',#228029,#228037,#228039,.T.); +#228037 = VERTEX_POINT('',#228038); +#228038 = CARTESIAN_POINT('',(179.931875,-57.523763,1.585)); +#228039 = LINE('',#228040,#228041); +#228040 = CARTESIAN_POINT('',(179.873814,-57.403316,1.585)); +#228041 = VECTOR('',#228042,1.); +#228042 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#228043 = ORIENTED_EDGE('',*,*,#228044,.T.); +#228044 = EDGE_CURVE('',#228037,#228045,#228047,.T.); +#228045 = VERTEX_POINT('',#228046); +#228046 = CARTESIAN_POINT('',(179.931116,-57.650095,1.585)); +#228047 = LINE('',#228048,#228049); +#228048 = CARTESIAN_POINT('',(179.931875,-57.523763,1.585)); +#228049 = VECTOR('',#228050,1.); +#228050 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#228051 = ORIENTED_EDGE('',*,*,#228052,.T.); +#228052 = EDGE_CURVE('',#228045,#228053,#228055,.T.); +#228053 = VERTEX_POINT('',#228054); +#228054 = CARTESIAN_POINT('',(179.873058,-57.818158,1.585)); +#228055 = LINE('',#228056,#228057); +#228056 = CARTESIAN_POINT('',(179.931116,-57.650095,1.585)); +#228057 = VECTOR('',#228058,1.); +#228058 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#228059 = ORIENTED_EDGE('',*,*,#228060,.T.); +#228060 = EDGE_CURVE('',#228053,#228061,#228063,.T.); +#228061 = VERTEX_POINT('',#228062); +#228062 = CARTESIAN_POINT('',(179.420335,-58.272919,1.585)); +#228063 = LINE('',#228064,#228065); +#228064 = CARTESIAN_POINT('',(179.873058,-57.818158,1.585)); +#228065 = VECTOR('',#228066,1.); +#228066 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#228067 = ORIENTED_EDGE('',*,*,#228068,.T.); +#228068 = EDGE_CURVE('',#228061,#228069,#228071,.T.); +#228069 = VERTEX_POINT('',#228070); +#228070 = CARTESIAN_POINT('',(179.872948,-58.27436,1.585)); +#228071 = LINE('',#228072,#228073); +#228072 = CARTESIAN_POINT('',(179.420335,-58.272919,1.585)); +#228073 = VECTOR('',#228074,1.); +#228074 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#228075 = ORIENTED_EDGE('',*,*,#228076,.T.); +#228076 = EDGE_CURVE('',#228069,#228077,#228079,.T.); +#228077 = VERTEX_POINT('',#228078); +#228078 = CARTESIAN_POINT('',(179.858316,-58.422919,1.585)); +#228079 = CIRCLE('',#228080,7.500006711464E-02); +#228080 = AXIS2_PLACEMENT_3D('',#228081,#228082,#228083); +#228081 = CARTESIAN_POINT('',(179.85831606711,-58.34791893288,1.585)); +#228082 = DIRECTION('',(0.,0.,-1.)); +#228083 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#228084 = ORIENTED_EDGE('',*,*,#228085,.T.); +#228085 = EDGE_CURVE('',#228077,#228086,#228088,.T.); +#228086 = VERTEX_POINT('',#228087); +#228087 = CARTESIAN_POINT('',(179.224637,-58.421478,1.585)); +#228088 = LINE('',#228089,#228090); +#228089 = CARTESIAN_POINT('',(179.858316,-58.422919,1.585)); +#228090 = VECTOR('',#228091,1.); +#228091 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#228092 = ORIENTED_EDGE('',*,*,#228093,.T.); +#228093 = EDGE_CURVE('',#228086,#228094,#228096,.T.); +#228094 = VERTEX_POINT('',#228095); +#228095 = CARTESIAN_POINT('',(179.186236,-58.294886,1.585)); +#228096 = CIRCLE('',#228097,7.500021013109E-02); +#228097 = AXIS2_PLACEMENT_3D('',#228098,#228099,#228100); +#228098 = CARTESIAN_POINT('',(179.2392693167,-58.34791899764,1.585)); +#228099 = DIRECTION('',(0.,0.,-1.)); +#228100 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#228101 = ORIENTED_EDGE('',*,*,#228102,.T.); +#228102 = EDGE_CURVE('',#228094,#228103,#228105,.T.); +#228103 = VERTEX_POINT('',#228104); +#228104 = CARTESIAN_POINT('',(179.745144,-57.735976,1.585)); +#228105 = LINE('',#228106,#228107); +#228106 = CARTESIAN_POINT('',(179.186236,-58.294886,1.585)); +#228107 = VECTOR('',#228108,1.); +#228108 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#228109 = ORIENTED_EDGE('',*,*,#228110,.T.); +#228110 = EDGE_CURVE('',#228103,#228111,#228113,.T.); +#228111 = VERTEX_POINT('',#228112); +#228112 = CARTESIAN_POINT('',(179.783316,-57.621463,1.585)); +#228113 = LINE('',#228114,#228115); +#228114 = CARTESIAN_POINT('',(179.745144,-57.735976,1.585)); +#228115 = VECTOR('',#228116,1.); +#228116 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#228117 = ORIENTED_EDGE('',*,*,#228118,.T.); +#228118 = EDGE_CURVE('',#228111,#228119,#228121,.T.); +#228119 = VERTEX_POINT('',#228120); +#228120 = CARTESIAN_POINT('',(179.783316,-57.5561,1.585)); +#228121 = LINE('',#228122,#228123); +#228122 = CARTESIAN_POINT('',(179.783316,-57.621463,1.585)); +#228123 = VECTOR('',#228124,1.); +#228124 = DIRECTION('',(0.,1.,0.)); +#228125 = ORIENTED_EDGE('',*,*,#228126,.T.); +#228126 = EDGE_CURVE('',#228119,#228127,#228129,.T.); +#228127 = VERTEX_POINT('',#228128); +#228128 = CARTESIAN_POINT('',(179.650135,-57.422919,1.585)); +#228129 = CIRCLE('',#228130,0.18686440374); +#228130 = AXIS2_PLACEMENT_3D('',#228131,#228132,#228133); +#228131 = CARTESIAN_POINT('',(179.602599,-57.603636,1.585)); +#228132 = DIRECTION('',(0.,0.,1.)); +#228133 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#228134 = ORIENTED_EDGE('',*,*,#228135,.T.); +#228135 = EDGE_CURVE('',#228127,#228136,#228138,.T.); +#228136 = VERTEX_POINT('',#228137); +#228137 = CARTESIAN_POINT('',(179.44745,-57.422919,1.585)); +#228138 = LINE('',#228139,#228140); +#228139 = CARTESIAN_POINT('',(179.650135,-57.422919,1.585)); +#228140 = VECTOR('',#228141,1.); +#228141 = DIRECTION('',(-1.,0.,0.)); +#228142 = ORIENTED_EDGE('',*,*,#228143,.T.); +#228143 = EDGE_CURVE('',#228136,#228144,#228146,.T.); +#228144 = VERTEX_POINT('',#228145); +#228145 = CARTESIAN_POINT('',(179.378934,-57.457177,1.585)); +#228146 = LINE('',#228147,#228148); +#228147 = CARTESIAN_POINT('',(179.44745,-57.422919,1.585)); +#228148 = VECTOR('',#228149,1.); +#228149 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#228150 = ORIENTED_EDGE('',*,*,#228151,.T.); +#228151 = EDGE_CURVE('',#228144,#228152,#228154,.T.); +#228152 = VERTEX_POINT('',#228153); +#228153 = CARTESIAN_POINT('',(179.328556,-57.505517,1.585)); +#228154 = LINE('',#228155,#228156); +#228155 = CARTESIAN_POINT('',(179.378934,-57.457177,1.585)); +#228156 = VECTOR('',#228157,1.); +#228157 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#228158 = ORIENTED_EDGE('',*,*,#228159,.T.); +#228159 = EDGE_CURVE('',#228152,#228160,#228162,.T.); +#228160 = VERTEX_POINT('',#228161); +#228161 = CARTESIAN_POINT('',(179.233855,-57.390124,1.585)); +#228162 = CIRCLE('',#228163,7.499996838526E-02); +#228163 = AXIS2_PLACEMENT_3D('',#228164,#228165,#228166); +#228164 = CARTESIAN_POINT('',(179.286888,-57.44315697246,1.585)); +#228165 = DIRECTION('',(0.,0.,-1.)); +#228166 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#228167 = ORIENTED_EDGE('',*,*,#228168,.T.); +#228168 = EDGE_CURVE('',#228160,#228018,#228169,.T.); +#228169 = LINE('',#228170,#228171); +#228170 = CARTESIAN_POINT('',(179.233855,-57.390124,1.585)); +#228171 = VECTOR('',#228172,1.); +#228172 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#228173 = PLANE('',#228174); +#228174 = AXIS2_PLACEMENT_3D('',#228175,#228176,#228177); +#228175 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228176 = DIRECTION('',(0.,0.,1.)); +#228177 = DIRECTION('',(1.,0.,-0.)); +#228178 = SHELL_BASED_SURFACE_MODEL('',(#228179)); +#228179 = OPEN_SHELL('',(#228180)); +#228180 = ADVANCED_FACE('',(#228181,#228292),#228344,.T.); +#228181 = FACE_BOUND('',#228182,.F.); +#228182 = EDGE_LOOP('',(#228183,#228194,#228202,#228211,#228219,#228228, + #228236,#228244,#228253,#228261,#228269,#228277,#228286)); +#228183 = ORIENTED_EDGE('',*,*,#228184,.T.); +#228184 = EDGE_CURVE('',#228185,#228187,#228189,.T.); +#228185 = VERTEX_POINT('',#228186); +#228186 = CARTESIAN_POINT('',(163.054996,-57.333287,1.585)); +#228187 = VERTEX_POINT('',#228188); +#228188 = CARTESIAN_POINT('',(163.128555,-57.272919,1.585)); +#228189 = CIRCLE('',#228190,7.500074938989E-02); +#228190 = AXIS2_PLACEMENT_3D('',#228191,#228192,#228193); +#228191 = CARTESIAN_POINT('',(163.12855546611,-57.34791974938,1.585)); +#228192 = DIRECTION('',(0.,0.,-1.)); +#228193 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228194 = ORIENTED_EDGE('',*,*,#228195,.T.); +#228195 = EDGE_CURVE('',#228187,#228196,#228198,.T.); +#228196 = VERTEX_POINT('',#228197); +#228197 = CARTESIAN_POINT('',(163.524139,-57.27436,1.585)); +#228198 = LINE('',#228199,#228200); +#228199 = CARTESIAN_POINT('',(163.128555,-57.272919,1.585)); +#228200 = VECTOR('',#228201,1.); +#228201 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#228202 = ORIENTED_EDGE('',*,*,#228203,.T.); +#228203 = EDGE_CURVE('',#228196,#228204,#228206,.T.); +#228204 = VERTEX_POINT('',#228205); +#228205 = CARTESIAN_POINT('',(163.773542,-57.523763,1.585)); +#228206 = CIRCLE('',#228207,0.347870264855); +#228207 = AXIS2_PLACEMENT_3D('',#228208,#228209,#228210); +#228208 = CARTESIAN_POINT('',(163.43681126502,-57.61109073497,1.585)); +#228209 = DIRECTION('',(0.,0.,-1.)); +#228210 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228211 = ORIENTED_EDGE('',*,*,#228212,.T.); +#228212 = EDGE_CURVE('',#228204,#228213,#228215,.T.); +#228213 = VERTEX_POINT('',#228214); +#228214 = CARTESIAN_POINT('',(163.77232,-57.701062,1.585)); +#228215 = LINE('',#228216,#228217); +#228216 = CARTESIAN_POINT('',(163.773542,-57.523763,1.585)); +#228217 = VECTOR('',#228218,1.); +#228218 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#228219 = ORIENTED_EDGE('',*,*,#228220,.T.); +#228220 = EDGE_CURVE('',#228213,#228221,#228223,.T.); +#228221 = VERTEX_POINT('',#228222); +#228222 = CARTESIAN_POINT('',(163.524139,-57.945287,1.585)); +#228223 = CIRCLE('',#228224,0.348632345849); +#228224 = AXIS2_PLACEMENT_3D('',#228225,#228226,#228227); +#228225 = CARTESIAN_POINT('',(163.43637019403,-57.6078834593,1.585)); +#228226 = DIRECTION('',(0.,0.,-1.)); +#228227 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228228 = ORIENTED_EDGE('',*,*,#228229,.T.); +#228229 = EDGE_CURVE('',#228221,#228230,#228232,.T.); +#228230 = VERTEX_POINT('',#228231); +#228231 = CARTESIAN_POINT('',(163.510622,-57.946618,1.585)); +#228232 = LINE('',#228233,#228234); +#228233 = CARTESIAN_POINT('',(163.524139,-57.945287,1.585)); +#228234 = VECTOR('',#228235,1.); +#228235 = DIRECTION('',(-0.995186940545,-9.799465989996E-02,0.)); +#228236 = ORIENTED_EDGE('',*,*,#228237,.T.); +#228237 = EDGE_CURVE('',#228230,#228238,#228240,.T.); +#228238 = VERTEX_POINT('',#228239); +#228239 = CARTESIAN_POINT('',(163.768636,-58.317723,1.585)); +#228240 = LINE('',#228241,#228242); +#228241 = CARTESIAN_POINT('',(163.510622,-57.946618,1.585)); +#228242 = VECTOR('',#228243,1.); +#228243 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228244 = ORIENTED_EDGE('',*,*,#228245,.T.); +#228245 = EDGE_CURVE('',#228238,#228246,#228248,.T.); +#228246 = VERTEX_POINT('',#228247); +#228247 = CARTESIAN_POINT('',(163.638541,-58.390929,1.585)); +#228248 = CIRCLE('',#228249,7.500005951702E-02); +#228249 = AXIS2_PLACEMENT_3D('',#228250,#228251,#228252); +#228250 = CARTESIAN_POINT('',(163.69998306294,-58.34791874739,1.585)); +#228251 = DIRECTION('',(0.,0.,-1.)); +#228252 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228253 = ORIENTED_EDGE('',*,*,#228254,.T.); +#228254 = EDGE_CURVE('',#228246,#228255,#228257,.T.); +#228255 = VERTEX_POINT('',#228256); +#228256 = CARTESIAN_POINT('',(163.327601,-57.946728,1.585)); +#228257 = LINE('',#228258,#228259); +#228258 = CARTESIAN_POINT('',(163.638541,-58.390929,1.585)); +#228259 = VECTOR('',#228260,1.); +#228260 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228261 = ORIENTED_EDGE('',*,*,#228262,.T.); +#228262 = EDGE_CURVE('',#228255,#228263,#228265,.T.); +#228263 = VERTEX_POINT('',#228264); +#228264 = CARTESIAN_POINT('',(163.203555,-57.946728,1.585)); +#228265 = LINE('',#228266,#228267); +#228266 = CARTESIAN_POINT('',(163.327601,-57.946728,1.585)); +#228267 = VECTOR('',#228268,1.); +#228268 = DIRECTION('',(-1.,0.,0.)); +#228269 = ORIENTED_EDGE('',*,*,#228270,.T.); +#228270 = EDGE_CURVE('',#228263,#228271,#228273,.T.); +#228271 = VERTEX_POINT('',#228272); +#228272 = CARTESIAN_POINT('',(163.202114,-58.362551,1.585)); +#228273 = LINE('',#228274,#228275); +#228274 = CARTESIAN_POINT('',(163.203555,-57.946728,1.585)); +#228275 = VECTOR('',#228276,1.); +#228276 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228277 = ORIENTED_EDGE('',*,*,#228278,.T.); +#228278 = EDGE_CURVE('',#228271,#228279,#228281,.T.); +#228279 = VERTEX_POINT('',#228280); +#228280 = CARTESIAN_POINT('',(163.053555,-58.347919,1.585)); +#228281 = CIRCLE('',#228282,7.500006711464E-02); +#228282 = AXIS2_PLACEMENT_3D('',#228283,#228284,#228285); +#228283 = CARTESIAN_POINT('',(163.12855506711,-58.34791906711,1.585)); +#228284 = DIRECTION('',(-0.,0.,-1.)); +#228285 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228286 = ORIENTED_EDGE('',*,*,#228287,.T.); +#228287 = EDGE_CURVE('',#228279,#228185,#228288,.T.); +#228288 = LINE('',#228289,#228290); +#228289 = CARTESIAN_POINT('',(163.053555,-58.347919,1.585)); +#228290 = VECTOR('',#228291,1.); +#228291 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228292 = FACE_BOUND('',#228293,.F.); +#228293 = EDGE_LOOP('',(#228294,#228305,#228313,#228321,#228329,#228338) + ); +#228294 = ORIENTED_EDGE('',*,*,#228295,.T.); +#228295 = EDGE_CURVE('',#228296,#228298,#228300,.T.); +#228296 = VERTEX_POINT('',#228297); +#228297 = CARTESIAN_POINT('',(163.624983,-57.5561,1.585)); +#228298 = VERTEX_POINT('',#228299); +#228299 = CARTESIAN_POINT('',(163.491802,-57.422919,1.585)); +#228300 = CIRCLE('',#228301,0.18686440374); +#228301 = AXIS2_PLACEMENT_3D('',#228302,#228303,#228304); +#228302 = CARTESIAN_POINT('',(163.444266,-57.603636,1.585)); +#228303 = DIRECTION('',(0.,0.,1.)); +#228304 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228305 = ORIENTED_EDGE('',*,*,#228306,.T.); +#228306 = EDGE_CURVE('',#228298,#228307,#228309,.T.); +#228307 = VERTEX_POINT('',#228308); +#228308 = CARTESIAN_POINT('',(163.203555,-57.422919,1.585)); +#228309 = LINE('',#228310,#228311); +#228310 = CARTESIAN_POINT('',(163.491802,-57.422919,1.585)); +#228311 = VECTOR('',#228312,1.); +#228312 = DIRECTION('',(-1.,0.,0.)); +#228313 = ORIENTED_EDGE('',*,*,#228314,.T.); +#228314 = EDGE_CURVE('',#228307,#228315,#228317,.T.); +#228315 = VERTEX_POINT('',#228316); +#228316 = CARTESIAN_POINT('',(163.203555,-57.796728,1.585)); +#228317 = LINE('',#228318,#228319); +#228318 = CARTESIAN_POINT('',(163.203555,-57.422919,1.585)); +#228319 = VECTOR('',#228320,1.); +#228320 = DIRECTION('',(0.,-1.,0.)); +#228321 = ORIENTED_EDGE('',*,*,#228322,.T.); +#228322 = EDGE_CURVE('',#228315,#228323,#228325,.T.); +#228323 = VERTEX_POINT('',#228324); +#228324 = CARTESIAN_POINT('',(163.491802,-57.796728,1.585)); +#228325 = LINE('',#228326,#228327); +#228326 = CARTESIAN_POINT('',(163.203555,-57.796728,1.585)); +#228327 = VECTOR('',#228328,1.); +#228328 = DIRECTION('',(1.,0.,0.)); +#228329 = ORIENTED_EDGE('',*,*,#228330,.T.); +#228330 = EDGE_CURVE('',#228323,#228331,#228333,.T.); +#228331 = VERTEX_POINT('',#228332); +#228332 = CARTESIAN_POINT('',(163.624983,-57.663547,1.585)); +#228333 = CIRCLE('',#228334,0.18686440374); +#228334 = AXIS2_PLACEMENT_3D('',#228335,#228336,#228337); +#228335 = CARTESIAN_POINT('',(163.444266,-57.616011,1.585)); +#228336 = DIRECTION('',(0.,0.,1.)); +#228337 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#228338 = ORIENTED_EDGE('',*,*,#228339,.T.); +#228339 = EDGE_CURVE('',#228331,#228296,#228340,.T.); +#228340 = LINE('',#228341,#228342); +#228341 = CARTESIAN_POINT('',(163.624983,-57.663547,1.585)); +#228342 = VECTOR('',#228343,1.); +#228343 = DIRECTION('',(0.,1.,0.)); +#228344 = PLANE('',#228345); +#228345 = AXIS2_PLACEMENT_3D('',#228346,#228347,#228348); +#228346 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228347 = DIRECTION('',(0.,0.,1.)); +#228348 = DIRECTION('',(1.,0.,-0.)); +#228349 = SHELL_BASED_SURFACE_MODEL('',(#228350)); +#228350 = OPEN_SHELL('',(#228351)); +#228351 = ADVANCED_FACE('',(#228352,#228463),#228515,.T.); +#228352 = FACE_BOUND('',#228353,.F.); +#228353 = EDGE_LOOP('',(#228354,#228365,#228373,#228382,#228390,#228399, + #228407,#228415,#228424,#228432,#228440,#228448,#228457)); +#228354 = ORIENTED_EDGE('',*,*,#228355,.T.); +#228355 = EDGE_CURVE('',#228356,#228358,#228360,.T.); +#228356 = VERTEX_POINT('',#228357); +#228357 = CARTESIAN_POINT('',(166.554996,-57.333287,1.585)); +#228358 = VERTEX_POINT('',#228359); +#228359 = CARTESIAN_POINT('',(166.628555,-57.272919,1.585)); +#228360 = CIRCLE('',#228361,7.500074938989E-02); +#228361 = AXIS2_PLACEMENT_3D('',#228362,#228363,#228364); +#228362 = CARTESIAN_POINT('',(166.62855546611,-57.34791974938,1.585)); +#228363 = DIRECTION('',(0.,0.,-1.)); +#228364 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228365 = ORIENTED_EDGE('',*,*,#228366,.T.); +#228366 = EDGE_CURVE('',#228358,#228367,#228369,.T.); +#228367 = VERTEX_POINT('',#228368); +#228368 = CARTESIAN_POINT('',(167.024139,-57.27436,1.585)); +#228369 = LINE('',#228370,#228371); +#228370 = CARTESIAN_POINT('',(166.628555,-57.272919,1.585)); +#228371 = VECTOR('',#228372,1.); +#228372 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#228373 = ORIENTED_EDGE('',*,*,#228374,.T.); +#228374 = EDGE_CURVE('',#228367,#228375,#228377,.T.); +#228375 = VERTEX_POINT('',#228376); +#228376 = CARTESIAN_POINT('',(167.273542,-57.523763,1.585)); +#228377 = CIRCLE('',#228378,0.347870264855); +#228378 = AXIS2_PLACEMENT_3D('',#228379,#228380,#228381); +#228379 = CARTESIAN_POINT('',(166.93681126502,-57.61109073497,1.585)); +#228380 = DIRECTION('',(0.,0.,-1.)); +#228381 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228382 = ORIENTED_EDGE('',*,*,#228383,.T.); +#228383 = EDGE_CURVE('',#228375,#228384,#228386,.T.); +#228384 = VERTEX_POINT('',#228385); +#228385 = CARTESIAN_POINT('',(167.27232,-57.701062,1.585)); +#228386 = LINE('',#228387,#228388); +#228387 = CARTESIAN_POINT('',(167.273542,-57.523763,1.585)); +#228388 = VECTOR('',#228389,1.); +#228389 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#228390 = ORIENTED_EDGE('',*,*,#228391,.T.); +#228391 = EDGE_CURVE('',#228384,#228392,#228394,.T.); +#228392 = VERTEX_POINT('',#228393); +#228393 = CARTESIAN_POINT('',(167.024139,-57.945287,1.585)); +#228394 = CIRCLE('',#228395,0.348632345849); +#228395 = AXIS2_PLACEMENT_3D('',#228396,#228397,#228398); +#228396 = CARTESIAN_POINT('',(166.93637019403,-57.6078834593,1.585)); +#228397 = DIRECTION('',(0.,0.,-1.)); +#228398 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228399 = ORIENTED_EDGE('',*,*,#228400,.T.); +#228400 = EDGE_CURVE('',#228392,#228401,#228403,.T.); +#228401 = VERTEX_POINT('',#228402); +#228402 = CARTESIAN_POINT('',(167.010622,-57.946618,1.585)); +#228403 = LINE('',#228404,#228405); +#228404 = CARTESIAN_POINT('',(167.024139,-57.945287,1.585)); +#228405 = VECTOR('',#228406,1.); +#228406 = DIRECTION('',(-0.995186940545,-9.799465989996E-02,0.)); +#228407 = ORIENTED_EDGE('',*,*,#228408,.T.); +#228408 = EDGE_CURVE('',#228401,#228409,#228411,.T.); +#228409 = VERTEX_POINT('',#228410); +#228410 = CARTESIAN_POINT('',(167.268636,-58.317723,1.585)); +#228411 = LINE('',#228412,#228413); +#228412 = CARTESIAN_POINT('',(167.010622,-57.946618,1.585)); +#228413 = VECTOR('',#228414,1.); +#228414 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228415 = ORIENTED_EDGE('',*,*,#228416,.T.); +#228416 = EDGE_CURVE('',#228409,#228417,#228419,.T.); +#228417 = VERTEX_POINT('',#228418); +#228418 = CARTESIAN_POINT('',(167.138541,-58.390929,1.585)); +#228419 = CIRCLE('',#228420,7.500005951702E-02); +#228420 = AXIS2_PLACEMENT_3D('',#228421,#228422,#228423); +#228421 = CARTESIAN_POINT('',(167.19998306294,-58.34791874739,1.585)); +#228422 = DIRECTION('',(0.,0.,-1.)); +#228423 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228424 = ORIENTED_EDGE('',*,*,#228425,.T.); +#228425 = EDGE_CURVE('',#228417,#228426,#228428,.T.); +#228426 = VERTEX_POINT('',#228427); +#228427 = CARTESIAN_POINT('',(166.827601,-57.946728,1.585)); +#228428 = LINE('',#228429,#228430); +#228429 = CARTESIAN_POINT('',(167.138541,-58.390929,1.585)); +#228430 = VECTOR('',#228431,1.); +#228431 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228432 = ORIENTED_EDGE('',*,*,#228433,.T.); +#228433 = EDGE_CURVE('',#228426,#228434,#228436,.T.); +#228434 = VERTEX_POINT('',#228435); +#228435 = CARTESIAN_POINT('',(166.703555,-57.946728,1.585)); +#228436 = LINE('',#228437,#228438); +#228437 = CARTESIAN_POINT('',(166.827601,-57.946728,1.585)); +#228438 = VECTOR('',#228439,1.); +#228439 = DIRECTION('',(-1.,0.,0.)); +#228440 = ORIENTED_EDGE('',*,*,#228441,.T.); +#228441 = EDGE_CURVE('',#228434,#228442,#228444,.T.); +#228442 = VERTEX_POINT('',#228443); +#228443 = CARTESIAN_POINT('',(166.702114,-58.362551,1.585)); +#228444 = LINE('',#228445,#228446); +#228445 = CARTESIAN_POINT('',(166.703555,-57.946728,1.585)); +#228446 = VECTOR('',#228447,1.); +#228447 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228448 = ORIENTED_EDGE('',*,*,#228449,.T.); +#228449 = EDGE_CURVE('',#228442,#228450,#228452,.T.); +#228450 = VERTEX_POINT('',#228451); +#228451 = CARTESIAN_POINT('',(166.553555,-58.347919,1.585)); +#228452 = CIRCLE('',#228453,7.500006711464E-02); +#228453 = AXIS2_PLACEMENT_3D('',#228454,#228455,#228456); +#228454 = CARTESIAN_POINT('',(166.62855506711,-58.34791906711,1.585)); +#228455 = DIRECTION('',(-0.,0.,-1.)); +#228456 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228457 = ORIENTED_EDGE('',*,*,#228458,.T.); +#228458 = EDGE_CURVE('',#228450,#228356,#228459,.T.); +#228459 = LINE('',#228460,#228461); +#228460 = CARTESIAN_POINT('',(166.553555,-58.347919,1.585)); +#228461 = VECTOR('',#228462,1.); +#228462 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228463 = FACE_BOUND('',#228464,.F.); +#228464 = EDGE_LOOP('',(#228465,#228476,#228484,#228492,#228500,#228509) + ); +#228465 = ORIENTED_EDGE('',*,*,#228466,.T.); +#228466 = EDGE_CURVE('',#228467,#228469,#228471,.T.); +#228467 = VERTEX_POINT('',#228468); +#228468 = CARTESIAN_POINT('',(167.124983,-57.5561,1.585)); +#228469 = VERTEX_POINT('',#228470); +#228470 = CARTESIAN_POINT('',(166.991802,-57.422919,1.585)); +#228471 = CIRCLE('',#228472,0.18686440374); +#228472 = AXIS2_PLACEMENT_3D('',#228473,#228474,#228475); +#228473 = CARTESIAN_POINT('',(166.944266,-57.603636,1.585)); +#228474 = DIRECTION('',(0.,0.,1.)); +#228475 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228476 = ORIENTED_EDGE('',*,*,#228477,.T.); +#228477 = EDGE_CURVE('',#228469,#228478,#228480,.T.); +#228478 = VERTEX_POINT('',#228479); +#228479 = CARTESIAN_POINT('',(166.703555,-57.422919,1.585)); +#228480 = LINE('',#228481,#228482); +#228481 = CARTESIAN_POINT('',(166.991802,-57.422919,1.585)); +#228482 = VECTOR('',#228483,1.); +#228483 = DIRECTION('',(-1.,0.,0.)); +#228484 = ORIENTED_EDGE('',*,*,#228485,.T.); +#228485 = EDGE_CURVE('',#228478,#228486,#228488,.T.); +#228486 = VERTEX_POINT('',#228487); +#228487 = CARTESIAN_POINT('',(166.703555,-57.796728,1.585)); +#228488 = LINE('',#228489,#228490); +#228489 = CARTESIAN_POINT('',(166.703555,-57.422919,1.585)); +#228490 = VECTOR('',#228491,1.); +#228491 = DIRECTION('',(0.,-1.,0.)); +#228492 = ORIENTED_EDGE('',*,*,#228493,.T.); +#228493 = EDGE_CURVE('',#228486,#228494,#228496,.T.); +#228494 = VERTEX_POINT('',#228495); +#228495 = CARTESIAN_POINT('',(166.991802,-57.796728,1.585)); +#228496 = LINE('',#228497,#228498); +#228497 = CARTESIAN_POINT('',(166.703555,-57.796728,1.585)); +#228498 = VECTOR('',#228499,1.); +#228499 = DIRECTION('',(1.,0.,0.)); +#228500 = ORIENTED_EDGE('',*,*,#228501,.T.); +#228501 = EDGE_CURVE('',#228494,#228502,#228504,.T.); +#228502 = VERTEX_POINT('',#228503); +#228503 = CARTESIAN_POINT('',(167.124983,-57.663547,1.585)); +#228504 = CIRCLE('',#228505,0.18686440374); +#228505 = AXIS2_PLACEMENT_3D('',#228506,#228507,#228508); +#228506 = CARTESIAN_POINT('',(166.944266,-57.616011,1.585)); +#228507 = DIRECTION('',(0.,0.,1.)); +#228508 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#228509 = ORIENTED_EDGE('',*,*,#228510,.T.); +#228510 = EDGE_CURVE('',#228502,#228467,#228511,.T.); +#228511 = LINE('',#228512,#228513); +#228512 = CARTESIAN_POINT('',(167.124983,-57.663547,1.585)); +#228513 = VECTOR('',#228514,1.); +#228514 = DIRECTION('',(0.,1.,0.)); +#228515 = PLANE('',#228516); +#228516 = AXIS2_PLACEMENT_3D('',#228517,#228518,#228519); +#228517 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228518 = DIRECTION('',(0.,0.,1.)); +#228519 = DIRECTION('',(1.,0.,-0.)); +#228520 = SHELL_BASED_SURFACE_MODEL('',(#228521)); +#228521 = OPEN_SHELL('',(#228522)); +#228522 = ADVANCED_FACE('',(#228523,#228634),#228686,.T.); +#228523 = FACE_BOUND('',#228524,.F.); +#228524 = EDGE_LOOP('',(#228525,#228536,#228544,#228553,#228561,#228570, + #228578,#228586,#228595,#228603,#228611,#228619,#228628)); +#228525 = ORIENTED_EDGE('',*,*,#228526,.T.); +#228526 = EDGE_CURVE('',#228527,#228529,#228531,.T.); +#228527 = VERTEX_POINT('',#228528); +#228528 = CARTESIAN_POINT('',(172.499043,-57.333287,1.585)); +#228529 = VERTEX_POINT('',#228530); +#228530 = CARTESIAN_POINT('',(172.572602,-57.272919,1.585)); +#228531 = CIRCLE('',#228532,7.500074938991E-02); +#228532 = AXIS2_PLACEMENT_3D('',#228533,#228534,#228535); +#228533 = CARTESIAN_POINT('',(172.57260246611,-57.34791974938,1.585)); +#228534 = DIRECTION('',(0.,0.,-1.)); +#228535 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228536 = ORIENTED_EDGE('',*,*,#228537,.T.); +#228537 = EDGE_CURVE('',#228529,#228538,#228540,.T.); +#228538 = VERTEX_POINT('',#228539); +#228539 = CARTESIAN_POINT('',(172.968186,-57.27436,1.585)); +#228540 = LINE('',#228541,#228542); +#228541 = CARTESIAN_POINT('',(172.572602,-57.272919,1.585)); +#228542 = VECTOR('',#228543,1.); +#228543 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#228544 = ORIENTED_EDGE('',*,*,#228545,.T.); +#228545 = EDGE_CURVE('',#228538,#228546,#228548,.T.); +#228546 = VERTEX_POINT('',#228547); +#228547 = CARTESIAN_POINT('',(173.217589,-57.523763,1.585)); +#228548 = CIRCLE('',#228549,0.347870264855); +#228549 = AXIS2_PLACEMENT_3D('',#228550,#228551,#228552); +#228550 = CARTESIAN_POINT('',(172.88085826502,-57.61109073497,1.585)); +#228551 = DIRECTION('',(0.,0.,-1.)); +#228552 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228553 = ORIENTED_EDGE('',*,*,#228554,.T.); +#228554 = EDGE_CURVE('',#228546,#228555,#228557,.T.); +#228555 = VERTEX_POINT('',#228556); +#228556 = CARTESIAN_POINT('',(173.216367,-57.701062,1.585)); +#228557 = LINE('',#228558,#228559); +#228558 = CARTESIAN_POINT('',(173.217589,-57.523763,1.585)); +#228559 = VECTOR('',#228560,1.); +#228560 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#228561 = ORIENTED_EDGE('',*,*,#228562,.T.); +#228562 = EDGE_CURVE('',#228555,#228563,#228565,.T.); +#228563 = VERTEX_POINT('',#228564); +#228564 = CARTESIAN_POINT('',(172.968186,-57.945287,1.585)); +#228565 = CIRCLE('',#228566,0.348632345848); +#228566 = AXIS2_PLACEMENT_3D('',#228567,#228568,#228569); +#228567 = CARTESIAN_POINT('',(172.88041719403,-57.6078834593,1.585)); +#228568 = DIRECTION('',(0.,0.,-1.)); +#228569 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228570 = ORIENTED_EDGE('',*,*,#228571,.T.); +#228571 = EDGE_CURVE('',#228563,#228572,#228574,.T.); +#228572 = VERTEX_POINT('',#228573); +#228573 = CARTESIAN_POINT('',(172.954669,-57.946618,1.585)); +#228574 = LINE('',#228575,#228576); +#228575 = CARTESIAN_POINT('',(172.968186,-57.945287,1.585)); +#228576 = VECTOR('',#228577,1.); +#228577 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#228578 = ORIENTED_EDGE('',*,*,#228579,.T.); +#228579 = EDGE_CURVE('',#228572,#228580,#228582,.T.); +#228580 = VERTEX_POINT('',#228581); +#228581 = CARTESIAN_POINT('',(173.212683,-58.317723,1.585)); +#228582 = LINE('',#228583,#228584); +#228583 = CARTESIAN_POINT('',(172.954669,-57.946618,1.585)); +#228584 = VECTOR('',#228585,1.); +#228585 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228586 = ORIENTED_EDGE('',*,*,#228587,.T.); +#228587 = EDGE_CURVE('',#228580,#228588,#228590,.T.); +#228588 = VERTEX_POINT('',#228589); +#228589 = CARTESIAN_POINT('',(173.082588,-58.390929,1.585)); +#228590 = CIRCLE('',#228591,7.500005951702E-02); +#228591 = AXIS2_PLACEMENT_3D('',#228592,#228593,#228594); +#228592 = CARTESIAN_POINT('',(173.14403006294,-58.34791874739,1.585)); +#228593 = DIRECTION('',(0.,0.,-1.)); +#228594 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228595 = ORIENTED_EDGE('',*,*,#228596,.T.); +#228596 = EDGE_CURVE('',#228588,#228597,#228599,.T.); +#228597 = VERTEX_POINT('',#228598); +#228598 = CARTESIAN_POINT('',(172.771648,-57.946728,1.585)); +#228599 = LINE('',#228600,#228601); +#228600 = CARTESIAN_POINT('',(173.082588,-58.390929,1.585)); +#228601 = VECTOR('',#228602,1.); +#228602 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228603 = ORIENTED_EDGE('',*,*,#228604,.T.); +#228604 = EDGE_CURVE('',#228597,#228605,#228607,.T.); +#228605 = VERTEX_POINT('',#228606); +#228606 = CARTESIAN_POINT('',(172.647602,-57.946728,1.585)); +#228607 = LINE('',#228608,#228609); +#228608 = CARTESIAN_POINT('',(172.771648,-57.946728,1.585)); +#228609 = VECTOR('',#228610,1.); +#228610 = DIRECTION('',(-1.,0.,0.)); +#228611 = ORIENTED_EDGE('',*,*,#228612,.T.); +#228612 = EDGE_CURVE('',#228605,#228613,#228615,.T.); +#228613 = VERTEX_POINT('',#228614); +#228614 = CARTESIAN_POINT('',(172.646161,-58.362551,1.585)); +#228615 = LINE('',#228616,#228617); +#228616 = CARTESIAN_POINT('',(172.647602,-57.946728,1.585)); +#228617 = VECTOR('',#228618,1.); +#228618 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228619 = ORIENTED_EDGE('',*,*,#228620,.T.); +#228620 = EDGE_CURVE('',#228613,#228621,#228623,.T.); +#228621 = VERTEX_POINT('',#228622); +#228622 = CARTESIAN_POINT('',(172.497602,-58.347919,1.585)); +#228623 = CIRCLE('',#228624,7.500006711464E-02); +#228624 = AXIS2_PLACEMENT_3D('',#228625,#228626,#228627); +#228625 = CARTESIAN_POINT('',(172.57260206711,-58.34791906711,1.585)); +#228626 = DIRECTION('',(-0.,0.,-1.)); +#228627 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228628 = ORIENTED_EDGE('',*,*,#228629,.T.); +#228629 = EDGE_CURVE('',#228621,#228527,#228630,.T.); +#228630 = LINE('',#228631,#228632); +#228631 = CARTESIAN_POINT('',(172.497602,-58.347919,1.585)); +#228632 = VECTOR('',#228633,1.); +#228633 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228634 = FACE_BOUND('',#228635,.F.); +#228635 = EDGE_LOOP('',(#228636,#228647,#228655,#228663,#228671,#228680) + ); +#228636 = ORIENTED_EDGE('',*,*,#228637,.T.); +#228637 = EDGE_CURVE('',#228638,#228640,#228642,.T.); +#228638 = VERTEX_POINT('',#228639); +#228639 = CARTESIAN_POINT('',(173.06903,-57.5561,1.585)); +#228640 = VERTEX_POINT('',#228641); +#228641 = CARTESIAN_POINT('',(172.935849,-57.422919,1.585)); +#228642 = CIRCLE('',#228643,0.18686440374); +#228643 = AXIS2_PLACEMENT_3D('',#228644,#228645,#228646); +#228644 = CARTESIAN_POINT('',(172.888313,-57.603636,1.585)); +#228645 = DIRECTION('',(0.,0.,1.)); +#228646 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228647 = ORIENTED_EDGE('',*,*,#228648,.T.); +#228648 = EDGE_CURVE('',#228640,#228649,#228651,.T.); +#228649 = VERTEX_POINT('',#228650); +#228650 = CARTESIAN_POINT('',(172.647602,-57.422919,1.585)); +#228651 = LINE('',#228652,#228653); +#228652 = CARTESIAN_POINT('',(172.935849,-57.422919,1.585)); +#228653 = VECTOR('',#228654,1.); +#228654 = DIRECTION('',(-1.,0.,0.)); +#228655 = ORIENTED_EDGE('',*,*,#228656,.T.); +#228656 = EDGE_CURVE('',#228649,#228657,#228659,.T.); +#228657 = VERTEX_POINT('',#228658); +#228658 = CARTESIAN_POINT('',(172.647602,-57.796728,1.585)); +#228659 = LINE('',#228660,#228661); +#228660 = CARTESIAN_POINT('',(172.647602,-57.422919,1.585)); +#228661 = VECTOR('',#228662,1.); +#228662 = DIRECTION('',(0.,-1.,0.)); +#228663 = ORIENTED_EDGE('',*,*,#228664,.T.); +#228664 = EDGE_CURVE('',#228657,#228665,#228667,.T.); +#228665 = VERTEX_POINT('',#228666); +#228666 = CARTESIAN_POINT('',(172.935849,-57.796728,1.585)); +#228667 = LINE('',#228668,#228669); +#228668 = CARTESIAN_POINT('',(172.647602,-57.796728,1.585)); +#228669 = VECTOR('',#228670,1.); +#228670 = DIRECTION('',(1.,0.,0.)); +#228671 = ORIENTED_EDGE('',*,*,#228672,.T.); +#228672 = EDGE_CURVE('',#228665,#228673,#228675,.T.); +#228673 = VERTEX_POINT('',#228674); +#228674 = CARTESIAN_POINT('',(173.06903,-57.663547,1.585)); +#228675 = CIRCLE('',#228676,0.18686440374); +#228676 = AXIS2_PLACEMENT_3D('',#228677,#228678,#228679); +#228677 = CARTESIAN_POINT('',(172.888313,-57.616011,1.585)); +#228678 = DIRECTION('',(0.,0.,1.)); +#228679 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#228680 = ORIENTED_EDGE('',*,*,#228681,.T.); +#228681 = EDGE_CURVE('',#228673,#228638,#228682,.T.); +#228682 = LINE('',#228683,#228684); +#228683 = CARTESIAN_POINT('',(173.06903,-57.663547,1.585)); +#228684 = VECTOR('',#228685,1.); +#228685 = DIRECTION('',(0.,1.,0.)); +#228686 = PLANE('',#228687); +#228687 = AXIS2_PLACEMENT_3D('',#228688,#228689,#228690); +#228688 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228689 = DIRECTION('',(0.,0.,1.)); +#228690 = DIRECTION('',(1.,0.,-0.)); +#228691 = SHELL_BASED_SURFACE_MODEL('',(#228692)); +#228692 = OPEN_SHELL('',(#228693)); +#228693 = ADVANCED_FACE('',(#228694,#228805),#228857,.T.); +#228694 = FACE_BOUND('',#228695,.F.); +#228695 = EDGE_LOOP('',(#228696,#228707,#228715,#228724,#228732,#228741, + #228749,#228757,#228766,#228774,#228782,#228790,#228799)); +#228696 = ORIENTED_EDGE('',*,*,#228697,.T.); +#228697 = EDGE_CURVE('',#228698,#228700,#228702,.T.); +#228698 = VERTEX_POINT('',#228699); +#228699 = CARTESIAN_POINT('',(176.499043,-57.333287,1.585)); +#228700 = VERTEX_POINT('',#228701); +#228701 = CARTESIAN_POINT('',(176.572602,-57.272919,1.585)); +#228702 = CIRCLE('',#228703,7.500074938991E-02); +#228703 = AXIS2_PLACEMENT_3D('',#228704,#228705,#228706); +#228704 = CARTESIAN_POINT('',(176.57260246611,-57.34791974938,1.585)); +#228705 = DIRECTION('',(0.,0.,-1.)); +#228706 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#228707 = ORIENTED_EDGE('',*,*,#228708,.T.); +#228708 = EDGE_CURVE('',#228700,#228709,#228711,.T.); +#228709 = VERTEX_POINT('',#228710); +#228710 = CARTESIAN_POINT('',(176.968186,-57.27436,1.585)); +#228711 = LINE('',#228712,#228713); +#228712 = CARTESIAN_POINT('',(176.572602,-57.272919,1.585)); +#228713 = VECTOR('',#228714,1.); +#228714 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#228715 = ORIENTED_EDGE('',*,*,#228716,.T.); +#228716 = EDGE_CURVE('',#228709,#228717,#228719,.T.); +#228717 = VERTEX_POINT('',#228718); +#228718 = CARTESIAN_POINT('',(177.217589,-57.523763,1.585)); +#228719 = CIRCLE('',#228720,0.347870264855); +#228720 = AXIS2_PLACEMENT_3D('',#228721,#228722,#228723); +#228721 = CARTESIAN_POINT('',(176.88085826502,-57.61109073497,1.585)); +#228722 = DIRECTION('',(0.,0.,-1.)); +#228723 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#228724 = ORIENTED_EDGE('',*,*,#228725,.T.); +#228725 = EDGE_CURVE('',#228717,#228726,#228728,.T.); +#228726 = VERTEX_POINT('',#228727); +#228727 = CARTESIAN_POINT('',(177.216367,-57.701062,1.585)); +#228728 = LINE('',#228729,#228730); +#228729 = CARTESIAN_POINT('',(177.217589,-57.523763,1.585)); +#228730 = VECTOR('',#228731,1.); +#228731 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#228732 = ORIENTED_EDGE('',*,*,#228733,.T.); +#228733 = EDGE_CURVE('',#228726,#228734,#228736,.T.); +#228734 = VERTEX_POINT('',#228735); +#228735 = CARTESIAN_POINT('',(176.968186,-57.945287,1.585)); +#228736 = CIRCLE('',#228737,0.348632345848); +#228737 = AXIS2_PLACEMENT_3D('',#228738,#228739,#228740); +#228738 = CARTESIAN_POINT('',(176.88041719403,-57.6078834593,1.585)); +#228739 = DIRECTION('',(0.,0.,-1.)); +#228740 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#228741 = ORIENTED_EDGE('',*,*,#228742,.T.); +#228742 = EDGE_CURVE('',#228734,#228743,#228745,.T.); +#228743 = VERTEX_POINT('',#228744); +#228744 = CARTESIAN_POINT('',(176.954669,-57.946618,1.585)); +#228745 = LINE('',#228746,#228747); +#228746 = CARTESIAN_POINT('',(176.968186,-57.945287,1.585)); +#228747 = VECTOR('',#228748,1.); +#228748 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#228749 = ORIENTED_EDGE('',*,*,#228750,.T.); +#228750 = EDGE_CURVE('',#228743,#228751,#228753,.T.); +#228751 = VERTEX_POINT('',#228752); +#228752 = CARTESIAN_POINT('',(177.212683,-58.317723,1.585)); +#228753 = LINE('',#228754,#228755); +#228754 = CARTESIAN_POINT('',(176.954669,-57.946618,1.585)); +#228755 = VECTOR('',#228756,1.); +#228756 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#228757 = ORIENTED_EDGE('',*,*,#228758,.T.); +#228758 = EDGE_CURVE('',#228751,#228759,#228761,.T.); +#228759 = VERTEX_POINT('',#228760); +#228760 = CARTESIAN_POINT('',(177.082588,-58.390929,1.585)); +#228761 = CIRCLE('',#228762,7.500005951702E-02); +#228762 = AXIS2_PLACEMENT_3D('',#228763,#228764,#228765); +#228763 = CARTESIAN_POINT('',(177.14403006294,-58.34791874739,1.585)); +#228764 = DIRECTION('',(0.,0.,-1.)); +#228765 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#228766 = ORIENTED_EDGE('',*,*,#228767,.T.); +#228767 = EDGE_CURVE('',#228759,#228768,#228770,.T.); +#228768 = VERTEX_POINT('',#228769); +#228769 = CARTESIAN_POINT('',(176.771648,-57.946728,1.585)); +#228770 = LINE('',#228771,#228772); +#228771 = CARTESIAN_POINT('',(177.082588,-58.390929,1.585)); +#228772 = VECTOR('',#228773,1.); +#228773 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#228774 = ORIENTED_EDGE('',*,*,#228775,.T.); +#228775 = EDGE_CURVE('',#228768,#228776,#228778,.T.); +#228776 = VERTEX_POINT('',#228777); +#228777 = CARTESIAN_POINT('',(176.647602,-57.946728,1.585)); +#228778 = LINE('',#228779,#228780); +#228779 = CARTESIAN_POINT('',(176.771648,-57.946728,1.585)); +#228780 = VECTOR('',#228781,1.); +#228781 = DIRECTION('',(-1.,0.,0.)); +#228782 = ORIENTED_EDGE('',*,*,#228783,.T.); +#228783 = EDGE_CURVE('',#228776,#228784,#228786,.T.); +#228784 = VERTEX_POINT('',#228785); +#228785 = CARTESIAN_POINT('',(176.646161,-58.362551,1.585)); +#228786 = LINE('',#228787,#228788); +#228787 = CARTESIAN_POINT('',(176.647602,-57.946728,1.585)); +#228788 = VECTOR('',#228789,1.); +#228789 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#228790 = ORIENTED_EDGE('',*,*,#228791,.T.); +#228791 = EDGE_CURVE('',#228784,#228792,#228794,.T.); +#228792 = VERTEX_POINT('',#228793); +#228793 = CARTESIAN_POINT('',(176.497602,-58.347919,1.585)); +#228794 = CIRCLE('',#228795,7.500006711464E-02); +#228795 = AXIS2_PLACEMENT_3D('',#228796,#228797,#228798); +#228796 = CARTESIAN_POINT('',(176.57260206711,-58.34791906711,1.585)); +#228797 = DIRECTION('',(-0.,0.,-1.)); +#228798 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#228799 = ORIENTED_EDGE('',*,*,#228800,.T.); +#228800 = EDGE_CURVE('',#228792,#228698,#228801,.T.); +#228801 = LINE('',#228802,#228803); +#228802 = CARTESIAN_POINT('',(176.497602,-58.347919,1.585)); +#228803 = VECTOR('',#228804,1.); +#228804 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#228805 = FACE_BOUND('',#228806,.F.); +#228806 = EDGE_LOOP('',(#228807,#228818,#228826,#228834,#228842,#228851) + ); +#228807 = ORIENTED_EDGE('',*,*,#228808,.T.); +#228808 = EDGE_CURVE('',#228809,#228811,#228813,.T.); +#228809 = VERTEX_POINT('',#228810); +#228810 = CARTESIAN_POINT('',(177.06903,-57.5561,1.585)); +#228811 = VERTEX_POINT('',#228812); +#228812 = CARTESIAN_POINT('',(176.935849,-57.422919,1.585)); +#228813 = CIRCLE('',#228814,0.18686440374); +#228814 = AXIS2_PLACEMENT_3D('',#228815,#228816,#228817); +#228815 = CARTESIAN_POINT('',(176.888313,-57.603636,1.585)); +#228816 = DIRECTION('',(0.,0.,1.)); +#228817 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#228818 = ORIENTED_EDGE('',*,*,#228819,.T.); +#228819 = EDGE_CURVE('',#228811,#228820,#228822,.T.); +#228820 = VERTEX_POINT('',#228821); +#228821 = CARTESIAN_POINT('',(176.647602,-57.422919,1.585)); +#228822 = LINE('',#228823,#228824); +#228823 = CARTESIAN_POINT('',(176.935849,-57.422919,1.585)); +#228824 = VECTOR('',#228825,1.); +#228825 = DIRECTION('',(-1.,0.,0.)); +#228826 = ORIENTED_EDGE('',*,*,#228827,.T.); +#228827 = EDGE_CURVE('',#228820,#228828,#228830,.T.); +#228828 = VERTEX_POINT('',#228829); +#228829 = CARTESIAN_POINT('',(176.647602,-57.796728,1.585)); +#228830 = LINE('',#228831,#228832); +#228831 = CARTESIAN_POINT('',(176.647602,-57.422919,1.585)); +#228832 = VECTOR('',#228833,1.); +#228833 = DIRECTION('',(0.,-1.,0.)); +#228834 = ORIENTED_EDGE('',*,*,#228835,.T.); +#228835 = EDGE_CURVE('',#228828,#228836,#228838,.T.); +#228836 = VERTEX_POINT('',#228837); +#228837 = CARTESIAN_POINT('',(176.935849,-57.796728,1.585)); +#228838 = LINE('',#228839,#228840); +#228839 = CARTESIAN_POINT('',(176.647602,-57.796728,1.585)); +#228840 = VECTOR('',#228841,1.); +#228841 = DIRECTION('',(1.,0.,0.)); +#228842 = ORIENTED_EDGE('',*,*,#228843,.T.); +#228843 = EDGE_CURVE('',#228836,#228844,#228846,.T.); +#228844 = VERTEX_POINT('',#228845); +#228845 = CARTESIAN_POINT('',(177.06903,-57.663547,1.585)); +#228846 = CIRCLE('',#228847,0.18686440374); +#228847 = AXIS2_PLACEMENT_3D('',#228848,#228849,#228850); +#228848 = CARTESIAN_POINT('',(176.888313,-57.616011,1.585)); +#228849 = DIRECTION('',(0.,0.,1.)); +#228850 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#228851 = ORIENTED_EDGE('',*,*,#228852,.T.); +#228852 = EDGE_CURVE('',#228844,#228809,#228853,.T.); +#228853 = LINE('',#228854,#228855); +#228854 = CARTESIAN_POINT('',(177.06903,-57.663547,1.585)); +#228855 = VECTOR('',#228856,1.); +#228856 = DIRECTION('',(0.,1.,0.)); +#228857 = PLANE('',#228858); +#228858 = AXIS2_PLACEMENT_3D('',#228859,#228860,#228861); +#228859 = CARTESIAN_POINT('',(0.,0.,1.585)); +#228860 = DIRECTION('',(0.,0.,1.)); +#228861 = DIRECTION('',(1.,0.,-0.)); +#228862 = SHELL_BASED_SURFACE_MODEL('',(#228863)); +#228863 = OPEN_SHELL('',(#228864)); +#228864 = ADVANCED_FACE('',(#228865,#229037),#229088,.T.); +#228865 = FACE_BOUND('',#228866,.F.); +#228866 = EDGE_LOOP('',(#228867,#228878,#228886,#228894,#228902,#228910, + #228918,#228926,#228934,#228942,#228950,#228958,#228966,#228975, + #228983,#228991,#228999,#229007,#229015,#229023,#229031)); +#228867 = ORIENTED_EDGE('',*,*,#228868,.T.); +#228868 = EDGE_CURVE('',#228869,#228871,#228873,.T.); +#228869 = VERTEX_POINT('',#228870); +#228870 = CARTESIAN_POINT('',(173.539061,-57.661789,1.585)); +#228871 = VERTEX_POINT('',#228872); +#228872 = CARTESIAN_POINT('',(173.999538,-57.669621,1.585)); +#228873 = CIRCLE('',#228874,0.398777683503); +#228874 = AXIS2_PLACEMENT_3D('',#228875,#228876,#228877); +#228875 = CARTESIAN_POINT('',(173.76376278885,-57.99123208604,1.585)); +#228876 = DIRECTION('',(0.,0.,-1.)); +#228877 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#228878 = ORIENTED_EDGE('',*,*,#228879,.T.); +#228879 = EDGE_CURVE('',#228871,#228880,#228882,.T.); +#228880 = VERTEX_POINT('',#228881); +#228881 = CARTESIAN_POINT('',(174.020636,-57.69533,1.585)); +#228882 = LINE('',#228883,#228884); +#228883 = CARTESIAN_POINT('',(173.999538,-57.669621,1.585)); +#228884 = VECTOR('',#228885,1.); +#228885 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#228886 = ORIENTED_EDGE('',*,*,#228887,.T.); +#228887 = EDGE_CURVE('',#228880,#228888,#228890,.T.); +#228888 = VERTEX_POINT('',#228889); +#228889 = CARTESIAN_POINT('',(174.074732,-57.809477,1.585)); +#228890 = LINE('',#228891,#228892); +#228891 = CARTESIAN_POINT('',(174.020636,-57.69533,1.585)); +#228892 = VECTOR('',#228893,1.); +#228893 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#228894 = ORIENTED_EDGE('',*,*,#228895,.T.); +#228895 = EDGE_CURVE('',#228888,#228896,#228898,.T.); +#228896 = VERTEX_POINT('',#228897); +#228897 = CARTESIAN_POINT('',(174.074732,-57.933979,1.585)); +#228898 = LINE('',#228899,#228900); +#228899 = CARTESIAN_POINT('',(174.074732,-57.809477,1.585)); +#228900 = VECTOR('',#228901,1.); +#228901 = DIRECTION('',(0.,-1.,0.)); +#228902 = ORIENTED_EDGE('',*,*,#228903,.T.); +#228903 = EDGE_CURVE('',#228896,#228904,#228906,.T.); +#228904 = VERTEX_POINT('',#228905); +#228905 = CARTESIAN_POINT('',(174.054261,-57.972324,1.585)); +#228906 = LINE('',#228907,#228908); +#228907 = CARTESIAN_POINT('',(174.074732,-57.933979,1.585)); +#228908 = VECTOR('',#228909,1.); +#228909 = DIRECTION('',(-0.470952387879,-0.882158629925,0.)); +#228910 = ORIENTED_EDGE('',*,*,#228911,.T.); +#228911 = EDGE_CURVE('',#228904,#228912,#228914,.T.); +#228912 = VERTEX_POINT('',#228913); +#228913 = CARTESIAN_POINT('',(174.015881,-57.992891,1.585)); +#228914 = LINE('',#228915,#228916); +#228915 = CARTESIAN_POINT('',(174.054261,-57.972324,1.585)); +#228916 = VECTOR('',#228917,1.); +#228917 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#228918 = ORIENTED_EDGE('',*,*,#228919,.T.); +#228919 = EDGE_CURVE('',#228912,#228920,#228922,.T.); +#228920 = VERTEX_POINT('',#228921); +#228921 = CARTESIAN_POINT('',(173.599983,-58.07607,1.585)); +#228922 = LINE('',#228923,#228924); +#228923 = CARTESIAN_POINT('',(174.015881,-57.992891,1.585)); +#228924 = VECTOR('',#228925,1.); +#228925 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#228926 = ORIENTED_EDGE('',*,*,#228927,.T.); +#228927 = EDGE_CURVE('',#228920,#228928,#228930,.T.); +#228928 = VERTEX_POINT('',#228929); +#228929 = CARTESIAN_POINT('',(173.599983,-58.187356,1.585)); +#228930 = LINE('',#228931,#228932); +#228931 = CARTESIAN_POINT('',(173.599983,-58.07607,1.585)); +#228932 = VECTOR('',#228933,1.); +#228933 = DIRECTION('',(0.,-1.,0.)); +#228934 = ORIENTED_EDGE('',*,*,#228935,.T.); +#228935 = EDGE_CURVE('',#228928,#228936,#228938,.T.); +#228936 = VERTEX_POINT('',#228937); +#228937 = CARTESIAN_POINT('',(173.628503,-58.244398,1.585)); +#228938 = LINE('',#228939,#228940); +#228939 = CARTESIAN_POINT('',(173.599983,-58.187356,1.585)); +#228940 = VECTOR('',#228941,1.); +#228941 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#228942 = ORIENTED_EDGE('',*,*,#228943,.T.); +#228943 = EDGE_CURVE('',#228936,#228944,#228946,.T.); +#228944 = VERTEX_POINT('',#228945); +#228945 = CARTESIAN_POINT('',(173.685545,-58.272919,1.585)); +#228946 = LINE('',#228947,#228948); +#228947 = CARTESIAN_POINT('',(173.628503,-58.244398,1.585)); +#228948 = VECTOR('',#228949,1.); +#228949 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#228950 = ORIENTED_EDGE('',*,*,#228951,.T.); +#228951 = EDGE_CURVE('',#228944,#228952,#228954,.T.); +#228952 = VERTEX_POINT('',#228953); +#228953 = CARTESIAN_POINT('',(173.840611,-58.272919,1.585)); +#228954 = LINE('',#228955,#228956); +#228955 = CARTESIAN_POINT('',(173.685545,-58.272919,1.585)); +#228956 = VECTOR('',#228957,1.); +#228957 = DIRECTION('',(1.,0.,0.)); +#228958 = ORIENTED_EDGE('',*,*,#228959,.T.); +#228959 = EDGE_CURVE('',#228952,#228960,#228962,.T.); +#228960 = VERTEX_POINT('',#228961); +#228961 = CARTESIAN_POINT('',(173.933744,-58.227963,1.585)); +#228962 = LINE('',#228963,#228964); +#228963 = CARTESIAN_POINT('',(173.840611,-58.272919,1.585)); +#228964 = VECTOR('',#228965,1.); +#228965 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#228966 = ORIENTED_EDGE('',*,*,#228967,.T.); +#228967 = EDGE_CURVE('',#228960,#228968,#228970,.T.); +#228968 = VERTEX_POINT('',#228969); +#228969 = CARTESIAN_POINT('',(173.987095,-58.367382,1.585)); +#228970 = CIRCLE('',#228971,7.500029440469E-02); +#228971 = AXIS2_PLACEMENT_3D('',#228972,#228973,#228974); +#228972 = CARTESIAN_POINT('',(173.95355335132,-58.30029994603,1.585)); +#228973 = DIRECTION('',(0.,0.,-1.)); +#228974 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#228975 = ORIENTED_EDGE('',*,*,#228976,.T.); +#228976 = EDGE_CURVE('',#228968,#228977,#228979,.T.); +#228977 = VERTEX_POINT('',#228978); +#228978 = CARTESIAN_POINT('',(173.872948,-58.421478,1.585)); +#228979 = LINE('',#228980,#228981); +#228980 = CARTESIAN_POINT('',(173.987095,-58.367382,1.585)); +#228981 = VECTOR('',#228982,1.); +#228982 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#228983 = ORIENTED_EDGE('',*,*,#228984,.T.); +#228984 = EDGE_CURVE('',#228977,#228985,#228987,.T.); +#228985 = VERTEX_POINT('',#228986); +#228986 = CARTESIAN_POINT('',(173.64803,-58.420256,1.585)); +#228987 = LINE('',#228988,#228989); +#228988 = CARTESIAN_POINT('',(173.872948,-58.421478,1.585)); +#228989 = VECTOR('',#228990,1.); +#228990 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#228991 = ORIENTED_EDGE('',*,*,#228992,.T.); +#228992 = EDGE_CURVE('',#228985,#228993,#228995,.T.); +#228993 = VERTEX_POINT('',#228994); +#228994 = CARTESIAN_POINT('',(173.526618,-58.35955,1.585)); +#228995 = LINE('',#228996,#228997); +#228996 = CARTESIAN_POINT('',(173.64803,-58.420256,1.585)); +#228997 = VECTOR('',#228998,1.); +#228998 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#228999 = ORIENTED_EDGE('',*,*,#229000,.T.); +#229000 = EDGE_CURVE('',#228993,#229001,#229003,.T.); +#229001 = VERTEX_POINT('',#229002); +#229002 = CARTESIAN_POINT('',(173.50552,-58.333841,1.585)); +#229003 = LINE('',#229004,#229005); +#229004 = CARTESIAN_POINT('',(173.526618,-58.35955,1.585)); +#229005 = VECTOR('',#229006,1.); +#229006 = DIRECTION('',(-0.634378352792,0.773022706982,0.)); +#229007 = ORIENTED_EDGE('',*,*,#229008,.T.); +#229008 = EDGE_CURVE('',#229001,#229009,#229011,.T.); +#229009 = VERTEX_POINT('',#229010); +#229010 = CARTESIAN_POINT('',(173.451424,-58.219693,1.585)); +#229011 = LINE('',#229012,#229013); +#229012 = CARTESIAN_POINT('',(173.50552,-58.333841,1.585)); +#229013 = VECTOR('',#229014,1.); +#229014 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#229015 = ORIENTED_EDGE('',*,*,#229016,.T.); +#229016 = EDGE_CURVE('',#229009,#229017,#229019,.T.); +#229017 = VERTEX_POINT('',#229018); +#229018 = CARTESIAN_POINT('',(173.452646,-57.8043,1.585)); +#229019 = LINE('',#229020,#229021); +#229020 = CARTESIAN_POINT('',(173.451424,-58.219693,1.585)); +#229021 = VECTOR('',#229022,1.); +#229022 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#229023 = ORIENTED_EDGE('',*,*,#229024,.T.); +#229024 = EDGE_CURVE('',#229017,#229025,#229027,.T.); +#229025 = VERTEX_POINT('',#229026); +#229026 = CARTESIAN_POINT('',(173.513352,-57.682887,1.585)); +#229027 = LINE('',#229028,#229029); +#229028 = CARTESIAN_POINT('',(173.452646,-57.8043,1.585)); +#229029 = VECTOR('',#229030,1.); +#229030 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#229031 = ORIENTED_EDGE('',*,*,#229032,.T.); +#229032 = EDGE_CURVE('',#229025,#228869,#229033,.T.); +#229033 = LINE('',#229034,#229035); +#229034 = CARTESIAN_POINT('',(173.513352,-57.682887,1.585)); +#229035 = VECTOR('',#229036,1.); +#229036 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#229037 = FACE_BOUND('',#229038,.F.); +#229038 = EDGE_LOOP('',(#229039,#229050,#229058,#229066,#229074,#229082) + ); +#229039 = ORIENTED_EDGE('',*,*,#229040,.T.); +#229040 = EDGE_CURVE('',#229041,#229043,#229045,.T.); +#229041 = VERTEX_POINT('',#229042); +#229042 = CARTESIAN_POINT('',(173.897652,-57.784772,1.585)); +#229043 = VERTEX_POINT('',#229044); +#229044 = CARTESIAN_POINT('',(173.628503,-57.784772,1.585)); +#229045 = CIRCLE('',#229046,0.239283669194); +#229046 = AXIS2_PLACEMENT_3D('',#229047,#229048,#229049); +#229047 = CARTESIAN_POINT('',(173.7630775,-57.98262643713,1.585)); +#229048 = DIRECTION('',(0.,0.,1.)); +#229049 = DIRECTION('',(0.562405702208,0.82686143103,-0.)); +#229050 = ORIENTED_EDGE('',*,*,#229051,.T.); +#229051 = EDGE_CURVE('',#229043,#229052,#229054,.T.); +#229052 = VERTEX_POINT('',#229053); +#229053 = CARTESIAN_POINT('',(173.599983,-57.841814,1.585)); +#229054 = LINE('',#229055,#229056); +#229055 = CARTESIAN_POINT('',(173.628503,-57.784772,1.585)); +#229056 = VECTOR('',#229057,1.); +#229057 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#229058 = ORIENTED_EDGE('',*,*,#229059,.T.); +#229059 = EDGE_CURVE('',#229052,#229060,#229062,.T.); +#229060 = VERTEX_POINT('',#229061); +#229061 = CARTESIAN_POINT('',(173.599983,-57.923099,1.585)); +#229062 = LINE('',#229063,#229064); +#229063 = CARTESIAN_POINT('',(173.599983,-57.841814,1.585)); +#229064 = VECTOR('',#229065,1.); +#229065 = DIRECTION('',(0.,-1.,0.)); +#229066 = ORIENTED_EDGE('',*,*,#229067,.T.); +#229067 = EDGE_CURVE('',#229060,#229068,#229070,.T.); +#229068 = VERTEX_POINT('',#229069); +#229069 = CARTESIAN_POINT('',(173.926173,-57.857862,1.585)); +#229070 = LINE('',#229071,#229072); +#229071 = CARTESIAN_POINT('',(173.599983,-57.923099,1.585)); +#229072 = VECTOR('',#229073,1.); +#229073 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#229074 = ORIENTED_EDGE('',*,*,#229075,.T.); +#229075 = EDGE_CURVE('',#229068,#229076,#229078,.T.); +#229076 = VERTEX_POINT('',#229077); +#229077 = CARTESIAN_POINT('',(173.926173,-57.841814,1.585)); +#229078 = LINE('',#229079,#229080); +#229079 = CARTESIAN_POINT('',(173.926173,-57.857862,1.585)); +#229080 = VECTOR('',#229081,1.); +#229081 = DIRECTION('',(0.,1.,0.)); +#229082 = ORIENTED_EDGE('',*,*,#229083,.T.); +#229083 = EDGE_CURVE('',#229076,#229041,#229084,.T.); +#229084 = LINE('',#229085,#229086); +#229085 = CARTESIAN_POINT('',(173.926173,-57.841814,1.585)); +#229086 = VECTOR('',#229087,1.); +#229087 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229088 = PLANE('',#229089); +#229089 = AXIS2_PLACEMENT_3D('',#229090,#229091,#229092); +#229090 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229091 = DIRECTION('',(0.,0.,1.)); +#229092 = DIRECTION('',(1.,0.,-0.)); +#229093 = SHELL_BASED_SURFACE_MODEL('',(#229094)); +#229094 = OPEN_SHELL('',(#229095)); +#229095 = ADVANCED_FACE('',(#229096),#229254,.T.); +#229096 = FACE_BOUND('',#229097,.F.); +#229097 = EDGE_LOOP('',(#229098,#229109,#229117,#229125,#229133,#229141, + #229150,#229158,#229167,#229175,#229183,#229191,#229199,#229207, + #229215,#229223,#229232,#229240,#229248)); +#229098 = ORIENTED_EDGE('',*,*,#229099,.T.); +#229099 = EDGE_CURVE('',#229100,#229102,#229104,.T.); +#229100 = VERTEX_POINT('',#229101); +#229101 = CARTESIAN_POINT('',(174.388077,-57.618892,1.585)); +#229102 = VERTEX_POINT('',#229103); +#229103 = CARTESIAN_POINT('',(174.490814,-57.638293,1.585)); +#229104 = CIRCLE('',#229105,7.44076017233E-02); +#229105 = AXIS2_PLACEMENT_3D('',#229106,#229107,#229108); +#229106 = CARTESIAN_POINT('',(174.42962006572,-57.68062258305,1.585)); +#229107 = DIRECTION('',(0.,0.,-1.)); +#229108 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#229109 = ORIENTED_EDGE('',*,*,#229110,.T.); +#229110 = EDGE_CURVE('',#229102,#229111,#229113,.T.); +#229111 = VERTEX_POINT('',#229112); +#229112 = CARTESIAN_POINT('',(174.55797,-57.607693,1.585)); +#229113 = LINE('',#229114,#229115); +#229114 = CARTESIAN_POINT('',(174.490814,-57.638293,1.585)); +#229115 = VECTOR('',#229116,1.); +#229116 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#229117 = ORIENTED_EDGE('',*,*,#229118,.T.); +#229118 = EDGE_CURVE('',#229111,#229119,#229121,.T.); +#229119 = VERTEX_POINT('',#229120); +#229120 = CARTESIAN_POINT('',(174.730091,-57.607693,1.585)); +#229121 = LINE('',#229122,#229123); +#229122 = CARTESIAN_POINT('',(174.55797,-57.607693,1.585)); +#229123 = VECTOR('',#229124,1.); +#229124 = DIRECTION('',(1.,0.,0.)); +#229125 = ORIENTED_EDGE('',*,*,#229126,.T.); +#229126 = EDGE_CURVE('',#229119,#229127,#229129,.T.); +#229127 = VERTEX_POINT('',#229128); +#229128 = CARTESIAN_POINT('',(174.856681,-57.669621,1.585)); +#229129 = LINE('',#229130,#229131); +#229130 = CARTESIAN_POINT('',(174.730091,-57.607693,1.585)); +#229131 = VECTOR('',#229132,1.); +#229132 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#229133 = ORIENTED_EDGE('',*,*,#229134,.T.); +#229134 = EDGE_CURVE('',#229127,#229135,#229137,.T.); +#229135 = VERTEX_POINT('',#229136); +#229136 = CARTESIAN_POINT('',(174.877779,-57.69533,1.585)); +#229137 = LINE('',#229138,#229139); +#229138 = CARTESIAN_POINT('',(174.856681,-57.669621,1.585)); +#229139 = VECTOR('',#229140,1.); +#229140 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#229141 = ORIENTED_EDGE('',*,*,#229142,.T.); +#229142 = EDGE_CURVE('',#229135,#229143,#229145,.T.); +#229143 = VERTEX_POINT('',#229144); +#229144 = CARTESIAN_POINT('',(174.920676,-58.389587,1.585)); +#229145 = CIRCLE('',#229146,0.780466291445); +#229146 = AXIS2_PLACEMENT_3D('',#229147,#229148,#229149); +#229147 = CARTESIAN_POINT('',(174.2018662213,-58.08554730828,1.585)); +#229148 = DIRECTION('',(0.,0.,-1.)); +#229149 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#229150 = ORIENTED_EDGE('',*,*,#229151,.T.); +#229151 = EDGE_CURVE('',#229143,#229152,#229154,.T.); +#229152 = VERTEX_POINT('',#229153); +#229153 = CARTESIAN_POINT('',(174.899984,-58.410279,1.585)); +#229154 = LINE('',#229155,#229156); +#229155 = CARTESIAN_POINT('',(174.920676,-58.389587,1.585)); +#229156 = VECTOR('',#229157,1.); +#229157 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229158 = ORIENTED_EDGE('',*,*,#229159,.T.); +#229159 = EDGE_CURVE('',#229152,#229160,#229162,.T.); +#229160 = VERTEX_POINT('',#229161); +#229161 = CARTESIAN_POINT('',(174.783316,-58.347919,1.585)); +#229162 = CIRCLE('',#229163,7.499979580328E-02); +#229163 = AXIS2_PLACEMENT_3D('',#229164,#229165,#229166); +#229164 = CARTESIAN_POINT('',(174.8583157958,-58.34791931647,1.585)); +#229165 = DIRECTION('',(-0.,0.,-1.)); +#229166 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#229167 = ORIENTED_EDGE('',*,*,#229168,.T.); +#229168 = EDGE_CURVE('',#229160,#229169,#229171,.T.); +#229169 = VERTEX_POINT('',#229170); +#229170 = CARTESIAN_POINT('',(174.783316,-57.841814,1.585)); +#229171 = LINE('',#229172,#229173); +#229172 = CARTESIAN_POINT('',(174.783316,-58.347919,1.585)); +#229173 = VECTOR('',#229174,1.); +#229174 = DIRECTION('',(0.,1.,0.)); +#229175 = ORIENTED_EDGE('',*,*,#229176,.T.); +#229176 = EDGE_CURVE('',#229169,#229177,#229179,.T.); +#229177 = VERTEX_POINT('',#229178); +#229178 = CARTESIAN_POINT('',(174.754795,-57.784772,1.585)); +#229179 = LINE('',#229180,#229181); +#229180 = CARTESIAN_POINT('',(174.783316,-57.841814,1.585)); +#229181 = VECTOR('',#229182,1.); +#229182 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229183 = ORIENTED_EDGE('',*,*,#229184,.T.); +#229184 = EDGE_CURVE('',#229177,#229185,#229187,.T.); +#229185 = VERTEX_POINT('',#229186); +#229186 = CARTESIAN_POINT('',(174.697754,-57.756252,1.585)); +#229187 = LINE('',#229188,#229189); +#229188 = CARTESIAN_POINT('',(174.754795,-57.784772,1.585)); +#229189 = VECTOR('',#229190,1.); +#229190 = DIRECTION('',(-0.894430327074,0.447207323296,0.)); +#229191 = ORIENTED_EDGE('',*,*,#229192,.T.); +#229192 = EDGE_CURVE('',#229185,#229193,#229195,.T.); +#229193 = VERTEX_POINT('',#229194); +#229194 = CARTESIAN_POINT('',(174.590307,-57.756252,1.585)); +#229195 = LINE('',#229196,#229197); +#229196 = CARTESIAN_POINT('',(174.697754,-57.756252,1.585)); +#229197 = VECTOR('',#229198,1.); +#229198 = DIRECTION('',(-1.,0.,0.)); +#229199 = ORIENTED_EDGE('',*,*,#229200,.T.); +#229200 = EDGE_CURVE('',#229193,#229201,#229203,.T.); +#229201 = VERTEX_POINT('',#229202); +#229202 = CARTESIAN_POINT('',(174.521791,-57.79051,1.585)); +#229203 = LINE('',#229204,#229205); +#229204 = CARTESIAN_POINT('',(174.590307,-57.756252,1.585)); +#229205 = VECTOR('',#229206,1.); +#229206 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#229207 = ORIENTED_EDGE('',*,*,#229208,.T.); +#229208 = EDGE_CURVE('',#229201,#229209,#229211,.T.); +#229209 = VERTEX_POINT('',#229210); +#229210 = CARTESIAN_POINT('',(174.504745,-57.807556,1.585)); +#229211 = LINE('',#229212,#229213); +#229212 = CARTESIAN_POINT('',(174.521791,-57.79051,1.585)); +#229213 = VECTOR('',#229214,1.); +#229214 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229215 = ORIENTED_EDGE('',*,*,#229216,.T.); +#229216 = EDGE_CURVE('',#229209,#229217,#229219,.T.); +#229217 = VERTEX_POINT('',#229218); +#229218 = CARTESIAN_POINT('',(174.503304,-58.362551,1.585)); +#229219 = LINE('',#229220,#229221); +#229220 = CARTESIAN_POINT('',(174.504745,-57.807556,1.585)); +#229221 = VECTOR('',#229222,1.); +#229222 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#229223 = ORIENTED_EDGE('',*,*,#229224,.T.); +#229224 = EDGE_CURVE('',#229217,#229225,#229227,.T.); +#229225 = VERTEX_POINT('',#229226); +#229226 = CARTESIAN_POINT('',(174.354745,-58.347919,1.585)); +#229227 = CIRCLE('',#229228,7.500006711464E-02); +#229228 = AXIS2_PLACEMENT_3D('',#229229,#229230,#229231); +#229229 = CARTESIAN_POINT('',(174.42974506711,-58.34791906711,1.585)); +#229230 = DIRECTION('',(-0.,0.,-1.)); +#229231 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#229232 = ORIENTED_EDGE('',*,*,#229233,.T.); +#229233 = EDGE_CURVE('',#229225,#229234,#229236,.T.); +#229234 = VERTEX_POINT('',#229235); +#229235 = CARTESIAN_POINT('',(174.356186,-57.66662,1.585)); +#229236 = LINE('',#229237,#229238); +#229237 = CARTESIAN_POINT('',(174.354745,-58.347919,1.585)); +#229238 = VECTOR('',#229239,1.); +#229239 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#229240 = ORIENTED_EDGE('',*,*,#229241,.T.); +#229241 = EDGE_CURVE('',#229234,#229242,#229244,.T.); +#229242 = VERTEX_POINT('',#229243); +#229243 = CARTESIAN_POINT('',(174.367385,-57.639584,1.585)); +#229244 = LINE('',#229245,#229246); +#229245 = CARTESIAN_POINT('',(174.356186,-57.66662,1.585)); +#229246 = VECTOR('',#229247,1.); +#229247 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229248 = ORIENTED_EDGE('',*,*,#229249,.T.); +#229249 = EDGE_CURVE('',#229242,#229100,#229250,.T.); +#229250 = LINE('',#229251,#229252); +#229251 = CARTESIAN_POINT('',(174.367385,-57.639584,1.585)); +#229252 = VECTOR('',#229253,1.); +#229253 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#229254 = PLANE('',#229255); +#229255 = AXIS2_PLACEMENT_3D('',#229256,#229257,#229258); +#229256 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229257 = DIRECTION('',(0.,0.,1.)); +#229258 = DIRECTION('',(1.,0.,-0.)); +#229259 = SHELL_BASED_SURFACE_MODEL('',(#229260)); +#229260 = OPEN_SHELL('',(#229261)); +#229261 = ADVANCED_FACE('',(#229262,#229434),#229485,.T.); +#229262 = FACE_BOUND('',#229263,.F.); +#229263 = EDGE_LOOP('',(#229264,#229275,#229283,#229291,#229299,#229307, + #229315,#229323,#229331,#229339,#229347,#229355,#229363,#229372, + #229380,#229388,#229396,#229404,#229412,#229420,#229428)); +#229264 = ORIENTED_EDGE('',*,*,#229265,.T.); +#229265 = EDGE_CURVE('',#229266,#229268,#229270,.T.); +#229266 = VERTEX_POINT('',#229267); +#229267 = CARTESIAN_POINT('',(177.539061,-57.661789,1.585)); +#229268 = VERTEX_POINT('',#229269); +#229269 = CARTESIAN_POINT('',(177.999538,-57.669621,1.585)); +#229270 = CIRCLE('',#229271,0.398777683503); +#229271 = AXIS2_PLACEMENT_3D('',#229272,#229273,#229274); +#229272 = CARTESIAN_POINT('',(177.76376278885,-57.99123208604,1.585)); +#229273 = DIRECTION('',(0.,0.,-1.)); +#229274 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#229275 = ORIENTED_EDGE('',*,*,#229276,.T.); +#229276 = EDGE_CURVE('',#229268,#229277,#229279,.T.); +#229277 = VERTEX_POINT('',#229278); +#229278 = CARTESIAN_POINT('',(178.020636,-57.69533,1.585)); +#229279 = LINE('',#229280,#229281); +#229280 = CARTESIAN_POINT('',(177.999538,-57.669621,1.585)); +#229281 = VECTOR('',#229282,1.); +#229282 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#229283 = ORIENTED_EDGE('',*,*,#229284,.T.); +#229284 = EDGE_CURVE('',#229277,#229285,#229287,.T.); +#229285 = VERTEX_POINT('',#229286); +#229286 = CARTESIAN_POINT('',(178.074732,-57.809477,1.585)); +#229287 = LINE('',#229288,#229289); +#229288 = CARTESIAN_POINT('',(178.020636,-57.69533,1.585)); +#229289 = VECTOR('',#229290,1.); +#229290 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#229291 = ORIENTED_EDGE('',*,*,#229292,.T.); +#229292 = EDGE_CURVE('',#229285,#229293,#229295,.T.); +#229293 = VERTEX_POINT('',#229294); +#229294 = CARTESIAN_POINT('',(178.074732,-57.933979,1.585)); +#229295 = LINE('',#229296,#229297); +#229296 = CARTESIAN_POINT('',(178.074732,-57.809477,1.585)); +#229297 = VECTOR('',#229298,1.); +#229298 = DIRECTION('',(0.,-1.,0.)); +#229299 = ORIENTED_EDGE('',*,*,#229300,.T.); +#229300 = EDGE_CURVE('',#229293,#229301,#229303,.T.); +#229301 = VERTEX_POINT('',#229302); +#229302 = CARTESIAN_POINT('',(178.054261,-57.972324,1.585)); +#229303 = LINE('',#229304,#229305); +#229304 = CARTESIAN_POINT('',(178.074732,-57.933979,1.585)); +#229305 = VECTOR('',#229306,1.); +#229306 = DIRECTION('',(-0.470952387879,-0.882158629925,0.)); +#229307 = ORIENTED_EDGE('',*,*,#229308,.T.); +#229308 = EDGE_CURVE('',#229301,#229309,#229311,.T.); +#229309 = VERTEX_POINT('',#229310); +#229310 = CARTESIAN_POINT('',(178.015881,-57.992891,1.585)); +#229311 = LINE('',#229312,#229313); +#229312 = CARTESIAN_POINT('',(178.054261,-57.972324,1.585)); +#229313 = VECTOR('',#229314,1.); +#229314 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#229315 = ORIENTED_EDGE('',*,*,#229316,.T.); +#229316 = EDGE_CURVE('',#229309,#229317,#229319,.T.); +#229317 = VERTEX_POINT('',#229318); +#229318 = CARTESIAN_POINT('',(177.599983,-58.07607,1.585)); +#229319 = LINE('',#229320,#229321); +#229320 = CARTESIAN_POINT('',(178.015881,-57.992891,1.585)); +#229321 = VECTOR('',#229322,1.); +#229322 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#229323 = ORIENTED_EDGE('',*,*,#229324,.T.); +#229324 = EDGE_CURVE('',#229317,#229325,#229327,.T.); +#229325 = VERTEX_POINT('',#229326); +#229326 = CARTESIAN_POINT('',(177.599983,-58.187356,1.585)); +#229327 = LINE('',#229328,#229329); +#229328 = CARTESIAN_POINT('',(177.599983,-58.07607,1.585)); +#229329 = VECTOR('',#229330,1.); +#229330 = DIRECTION('',(0.,-1.,0.)); +#229331 = ORIENTED_EDGE('',*,*,#229332,.T.); +#229332 = EDGE_CURVE('',#229325,#229333,#229335,.T.); +#229333 = VERTEX_POINT('',#229334); +#229334 = CARTESIAN_POINT('',(177.628503,-58.244398,1.585)); +#229335 = LINE('',#229336,#229337); +#229336 = CARTESIAN_POINT('',(177.599983,-58.187356,1.585)); +#229337 = VECTOR('',#229338,1.); +#229338 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#229339 = ORIENTED_EDGE('',*,*,#229340,.T.); +#229340 = EDGE_CURVE('',#229333,#229341,#229343,.T.); +#229341 = VERTEX_POINT('',#229342); +#229342 = CARTESIAN_POINT('',(177.685545,-58.272919,1.585)); +#229343 = LINE('',#229344,#229345); +#229344 = CARTESIAN_POINT('',(177.628503,-58.244398,1.585)); +#229345 = VECTOR('',#229346,1.); +#229346 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#229347 = ORIENTED_EDGE('',*,*,#229348,.T.); +#229348 = EDGE_CURVE('',#229341,#229349,#229351,.T.); +#229349 = VERTEX_POINT('',#229350); +#229350 = CARTESIAN_POINT('',(177.840611,-58.272919,1.585)); +#229351 = LINE('',#229352,#229353); +#229352 = CARTESIAN_POINT('',(177.685545,-58.272919,1.585)); +#229353 = VECTOR('',#229354,1.); +#229354 = DIRECTION('',(1.,0.,0.)); +#229355 = ORIENTED_EDGE('',*,*,#229356,.T.); +#229356 = EDGE_CURVE('',#229349,#229357,#229359,.T.); +#229357 = VERTEX_POINT('',#229358); +#229358 = CARTESIAN_POINT('',(177.933744,-58.227963,1.585)); +#229359 = LINE('',#229360,#229361); +#229360 = CARTESIAN_POINT('',(177.840611,-58.272919,1.585)); +#229361 = VECTOR('',#229362,1.); +#229362 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#229363 = ORIENTED_EDGE('',*,*,#229364,.T.); +#229364 = EDGE_CURVE('',#229357,#229365,#229367,.T.); +#229365 = VERTEX_POINT('',#229366); +#229366 = CARTESIAN_POINT('',(177.987095,-58.367382,1.585)); +#229367 = CIRCLE('',#229368,7.500029440469E-02); +#229368 = AXIS2_PLACEMENT_3D('',#229369,#229370,#229371); +#229369 = CARTESIAN_POINT('',(177.95355335132,-58.30029994603,1.585)); +#229370 = DIRECTION('',(0.,0.,-1.)); +#229371 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#229372 = ORIENTED_EDGE('',*,*,#229373,.T.); +#229373 = EDGE_CURVE('',#229365,#229374,#229376,.T.); +#229374 = VERTEX_POINT('',#229375); +#229375 = CARTESIAN_POINT('',(177.872948,-58.421478,1.585)); +#229376 = LINE('',#229377,#229378); +#229377 = CARTESIAN_POINT('',(177.987095,-58.367382,1.585)); +#229378 = VECTOR('',#229379,1.); +#229379 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#229380 = ORIENTED_EDGE('',*,*,#229381,.T.); +#229381 = EDGE_CURVE('',#229374,#229382,#229384,.T.); +#229382 = VERTEX_POINT('',#229383); +#229383 = CARTESIAN_POINT('',(177.64803,-58.420256,1.585)); +#229384 = LINE('',#229385,#229386); +#229385 = CARTESIAN_POINT('',(177.872948,-58.421478,1.585)); +#229386 = VECTOR('',#229387,1.); +#229387 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#229388 = ORIENTED_EDGE('',*,*,#229389,.T.); +#229389 = EDGE_CURVE('',#229382,#229390,#229392,.T.); +#229390 = VERTEX_POINT('',#229391); +#229391 = CARTESIAN_POINT('',(177.526618,-58.35955,1.585)); +#229392 = LINE('',#229393,#229394); +#229393 = CARTESIAN_POINT('',(177.64803,-58.420256,1.585)); +#229394 = VECTOR('',#229395,1.); +#229395 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#229396 = ORIENTED_EDGE('',*,*,#229397,.T.); +#229397 = EDGE_CURVE('',#229390,#229398,#229400,.T.); +#229398 = VERTEX_POINT('',#229399); +#229399 = CARTESIAN_POINT('',(177.50552,-58.333841,1.585)); +#229400 = LINE('',#229401,#229402); +#229401 = CARTESIAN_POINT('',(177.526618,-58.35955,1.585)); +#229402 = VECTOR('',#229403,1.); +#229403 = DIRECTION('',(-0.634378352792,0.773022706982,0.)); +#229404 = ORIENTED_EDGE('',*,*,#229405,.T.); +#229405 = EDGE_CURVE('',#229398,#229406,#229408,.T.); +#229406 = VERTEX_POINT('',#229407); +#229407 = CARTESIAN_POINT('',(177.451424,-58.219693,1.585)); +#229408 = LINE('',#229409,#229410); +#229409 = CARTESIAN_POINT('',(177.50552,-58.333841,1.585)); +#229410 = VECTOR('',#229411,1.); +#229411 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#229412 = ORIENTED_EDGE('',*,*,#229413,.T.); +#229413 = EDGE_CURVE('',#229406,#229414,#229416,.T.); +#229414 = VERTEX_POINT('',#229415); +#229415 = CARTESIAN_POINT('',(177.452646,-57.8043,1.585)); +#229416 = LINE('',#229417,#229418); +#229417 = CARTESIAN_POINT('',(177.451424,-58.219693,1.585)); +#229418 = VECTOR('',#229419,1.); +#229419 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#229420 = ORIENTED_EDGE('',*,*,#229421,.T.); +#229421 = EDGE_CURVE('',#229414,#229422,#229424,.T.); +#229422 = VERTEX_POINT('',#229423); +#229423 = CARTESIAN_POINT('',(177.513352,-57.682887,1.585)); +#229424 = LINE('',#229425,#229426); +#229425 = CARTESIAN_POINT('',(177.452646,-57.8043,1.585)); +#229426 = VECTOR('',#229427,1.); +#229427 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#229428 = ORIENTED_EDGE('',*,*,#229429,.T.); +#229429 = EDGE_CURVE('',#229422,#229266,#229430,.T.); +#229430 = LINE('',#229431,#229432); +#229431 = CARTESIAN_POINT('',(177.513352,-57.682887,1.585)); +#229432 = VECTOR('',#229433,1.); +#229433 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#229434 = FACE_BOUND('',#229435,.F.); +#229435 = EDGE_LOOP('',(#229436,#229447,#229455,#229463,#229471,#229479) + ); +#229436 = ORIENTED_EDGE('',*,*,#229437,.T.); +#229437 = EDGE_CURVE('',#229438,#229440,#229442,.T.); +#229438 = VERTEX_POINT('',#229439); +#229439 = CARTESIAN_POINT('',(177.897652,-57.784772,1.585)); +#229440 = VERTEX_POINT('',#229441); +#229441 = CARTESIAN_POINT('',(177.628503,-57.784772,1.585)); +#229442 = CIRCLE('',#229443,0.239283669194); +#229443 = AXIS2_PLACEMENT_3D('',#229444,#229445,#229446); +#229444 = CARTESIAN_POINT('',(177.7630775,-57.98262643713,1.585)); +#229445 = DIRECTION('',(0.,0.,1.)); +#229446 = DIRECTION('',(0.562405702208,0.82686143103,-0.)); +#229447 = ORIENTED_EDGE('',*,*,#229448,.T.); +#229448 = EDGE_CURVE('',#229440,#229449,#229451,.T.); +#229449 = VERTEX_POINT('',#229450); +#229450 = CARTESIAN_POINT('',(177.599983,-57.841814,1.585)); +#229451 = LINE('',#229452,#229453); +#229452 = CARTESIAN_POINT('',(177.628503,-57.784772,1.585)); +#229453 = VECTOR('',#229454,1.); +#229454 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#229455 = ORIENTED_EDGE('',*,*,#229456,.T.); +#229456 = EDGE_CURVE('',#229449,#229457,#229459,.T.); +#229457 = VERTEX_POINT('',#229458); +#229458 = CARTESIAN_POINT('',(177.599983,-57.923099,1.585)); +#229459 = LINE('',#229460,#229461); +#229460 = CARTESIAN_POINT('',(177.599983,-57.841814,1.585)); +#229461 = VECTOR('',#229462,1.); +#229462 = DIRECTION('',(0.,-1.,0.)); +#229463 = ORIENTED_EDGE('',*,*,#229464,.T.); +#229464 = EDGE_CURVE('',#229457,#229465,#229467,.T.); +#229465 = VERTEX_POINT('',#229466); +#229466 = CARTESIAN_POINT('',(177.926173,-57.857862,1.585)); +#229467 = LINE('',#229468,#229469); +#229468 = CARTESIAN_POINT('',(177.599983,-57.923099,1.585)); +#229469 = VECTOR('',#229470,1.); +#229470 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#229471 = ORIENTED_EDGE('',*,*,#229472,.T.); +#229472 = EDGE_CURVE('',#229465,#229473,#229475,.T.); +#229473 = VERTEX_POINT('',#229474); +#229474 = CARTESIAN_POINT('',(177.926173,-57.841814,1.585)); +#229475 = LINE('',#229476,#229477); +#229476 = CARTESIAN_POINT('',(177.926173,-57.857862,1.585)); +#229477 = VECTOR('',#229478,1.); +#229478 = DIRECTION('',(0.,1.,0.)); +#229479 = ORIENTED_EDGE('',*,*,#229480,.T.); +#229480 = EDGE_CURVE('',#229473,#229438,#229481,.T.); +#229481 = LINE('',#229482,#229483); +#229482 = CARTESIAN_POINT('',(177.926173,-57.841814,1.585)); +#229483 = VECTOR('',#229484,1.); +#229484 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229485 = PLANE('',#229486); +#229486 = AXIS2_PLACEMENT_3D('',#229487,#229488,#229489); +#229487 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229488 = DIRECTION('',(0.,0.,1.)); +#229489 = DIRECTION('',(1.,0.,-0.)); +#229490 = SHELL_BASED_SURFACE_MODEL('',(#229491)); +#229491 = OPEN_SHELL('',(#229492)); +#229492 = ADVANCED_FACE('',(#229493),#229651,.T.); +#229493 = FACE_BOUND('',#229494,.F.); +#229494 = EDGE_LOOP('',(#229495,#229506,#229514,#229522,#229530,#229538, + #229547,#229555,#229564,#229572,#229580,#229588,#229596,#229604, + #229612,#229620,#229629,#229637,#229645)); +#229495 = ORIENTED_EDGE('',*,*,#229496,.T.); +#229496 = EDGE_CURVE('',#229497,#229499,#229501,.T.); +#229497 = VERTEX_POINT('',#229498); +#229498 = CARTESIAN_POINT('',(178.388077,-57.618892,1.585)); +#229499 = VERTEX_POINT('',#229500); +#229500 = CARTESIAN_POINT('',(178.490814,-57.638293,1.585)); +#229501 = CIRCLE('',#229502,7.44076017233E-02); +#229502 = AXIS2_PLACEMENT_3D('',#229503,#229504,#229505); +#229503 = CARTESIAN_POINT('',(178.42962006572,-57.68062258305,1.585)); +#229504 = DIRECTION('',(0.,0.,-1.)); +#229505 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#229506 = ORIENTED_EDGE('',*,*,#229507,.T.); +#229507 = EDGE_CURVE('',#229499,#229508,#229510,.T.); +#229508 = VERTEX_POINT('',#229509); +#229509 = CARTESIAN_POINT('',(178.55797,-57.607693,1.585)); +#229510 = LINE('',#229511,#229512); +#229511 = CARTESIAN_POINT('',(178.490814,-57.638293,1.585)); +#229512 = VECTOR('',#229513,1.); +#229513 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#229514 = ORIENTED_EDGE('',*,*,#229515,.T.); +#229515 = EDGE_CURVE('',#229508,#229516,#229518,.T.); +#229516 = VERTEX_POINT('',#229517); +#229517 = CARTESIAN_POINT('',(178.730091,-57.607693,1.585)); +#229518 = LINE('',#229519,#229520); +#229519 = CARTESIAN_POINT('',(178.55797,-57.607693,1.585)); +#229520 = VECTOR('',#229521,1.); +#229521 = DIRECTION('',(1.,0.,0.)); +#229522 = ORIENTED_EDGE('',*,*,#229523,.T.); +#229523 = EDGE_CURVE('',#229516,#229524,#229526,.T.); +#229524 = VERTEX_POINT('',#229525); +#229525 = CARTESIAN_POINT('',(178.856681,-57.669621,1.585)); +#229526 = LINE('',#229527,#229528); +#229527 = CARTESIAN_POINT('',(178.730091,-57.607693,1.585)); +#229528 = VECTOR('',#229529,1.); +#229529 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#229530 = ORIENTED_EDGE('',*,*,#229531,.T.); +#229531 = EDGE_CURVE('',#229524,#229532,#229534,.T.); +#229532 = VERTEX_POINT('',#229533); +#229533 = CARTESIAN_POINT('',(178.877779,-57.69533,1.585)); +#229534 = LINE('',#229535,#229536); +#229535 = CARTESIAN_POINT('',(178.856681,-57.669621,1.585)); +#229536 = VECTOR('',#229537,1.); +#229537 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#229538 = ORIENTED_EDGE('',*,*,#229539,.T.); +#229539 = EDGE_CURVE('',#229532,#229540,#229542,.T.); +#229540 = VERTEX_POINT('',#229541); +#229541 = CARTESIAN_POINT('',(178.920676,-58.389587,1.585)); +#229542 = CIRCLE('',#229543,0.780466291445); +#229543 = AXIS2_PLACEMENT_3D('',#229544,#229545,#229546); +#229544 = CARTESIAN_POINT('',(178.2018662213,-58.08554730828,1.585)); +#229545 = DIRECTION('',(0.,0.,-1.)); +#229546 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#229547 = ORIENTED_EDGE('',*,*,#229548,.T.); +#229548 = EDGE_CURVE('',#229540,#229549,#229551,.T.); +#229549 = VERTEX_POINT('',#229550); +#229550 = CARTESIAN_POINT('',(178.899984,-58.410279,1.585)); +#229551 = LINE('',#229552,#229553); +#229552 = CARTESIAN_POINT('',(178.920676,-58.389587,1.585)); +#229553 = VECTOR('',#229554,1.); +#229554 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229555 = ORIENTED_EDGE('',*,*,#229556,.T.); +#229556 = EDGE_CURVE('',#229549,#229557,#229559,.T.); +#229557 = VERTEX_POINT('',#229558); +#229558 = CARTESIAN_POINT('',(178.783316,-58.347919,1.585)); +#229559 = CIRCLE('',#229560,7.499979580328E-02); +#229560 = AXIS2_PLACEMENT_3D('',#229561,#229562,#229563); +#229561 = CARTESIAN_POINT('',(178.8583157958,-58.34791931647,1.585)); +#229562 = DIRECTION('',(-0.,0.,-1.)); +#229563 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#229564 = ORIENTED_EDGE('',*,*,#229565,.T.); +#229565 = EDGE_CURVE('',#229557,#229566,#229568,.T.); +#229566 = VERTEX_POINT('',#229567); +#229567 = CARTESIAN_POINT('',(178.783316,-57.841814,1.585)); +#229568 = LINE('',#229569,#229570); +#229569 = CARTESIAN_POINT('',(178.783316,-58.347919,1.585)); +#229570 = VECTOR('',#229571,1.); +#229571 = DIRECTION('',(0.,1.,0.)); +#229572 = ORIENTED_EDGE('',*,*,#229573,.T.); +#229573 = EDGE_CURVE('',#229566,#229574,#229576,.T.); +#229574 = VERTEX_POINT('',#229575); +#229575 = CARTESIAN_POINT('',(178.754795,-57.784772,1.585)); +#229576 = LINE('',#229577,#229578); +#229577 = CARTESIAN_POINT('',(178.783316,-57.841814,1.585)); +#229578 = VECTOR('',#229579,1.); +#229579 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#229580 = ORIENTED_EDGE('',*,*,#229581,.T.); +#229581 = EDGE_CURVE('',#229574,#229582,#229584,.T.); +#229582 = VERTEX_POINT('',#229583); +#229583 = CARTESIAN_POINT('',(178.697754,-57.756252,1.585)); +#229584 = LINE('',#229585,#229586); +#229585 = CARTESIAN_POINT('',(178.754795,-57.784772,1.585)); +#229586 = VECTOR('',#229587,1.); +#229587 = DIRECTION('',(-0.894430327074,0.447207323296,0.)); +#229588 = ORIENTED_EDGE('',*,*,#229589,.T.); +#229589 = EDGE_CURVE('',#229582,#229590,#229592,.T.); +#229590 = VERTEX_POINT('',#229591); +#229591 = CARTESIAN_POINT('',(178.590307,-57.756252,1.585)); +#229592 = LINE('',#229593,#229594); +#229593 = CARTESIAN_POINT('',(178.697754,-57.756252,1.585)); +#229594 = VECTOR('',#229595,1.); +#229595 = DIRECTION('',(-1.,0.,0.)); +#229596 = ORIENTED_EDGE('',*,*,#229597,.T.); +#229597 = EDGE_CURVE('',#229590,#229598,#229600,.T.); +#229598 = VERTEX_POINT('',#229599); +#229599 = CARTESIAN_POINT('',(178.521791,-57.79051,1.585)); +#229600 = LINE('',#229601,#229602); +#229601 = CARTESIAN_POINT('',(178.590307,-57.756252,1.585)); +#229602 = VECTOR('',#229603,1.); +#229603 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#229604 = ORIENTED_EDGE('',*,*,#229605,.T.); +#229605 = EDGE_CURVE('',#229598,#229606,#229608,.T.); +#229606 = VERTEX_POINT('',#229607); +#229607 = CARTESIAN_POINT('',(178.504745,-57.807556,1.585)); +#229608 = LINE('',#229609,#229610); +#229609 = CARTESIAN_POINT('',(178.521791,-57.79051,1.585)); +#229610 = VECTOR('',#229611,1.); +#229611 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229612 = ORIENTED_EDGE('',*,*,#229613,.T.); +#229613 = EDGE_CURVE('',#229606,#229614,#229616,.T.); +#229614 = VERTEX_POINT('',#229615); +#229615 = CARTESIAN_POINT('',(178.503304,-58.362551,1.585)); +#229616 = LINE('',#229617,#229618); +#229617 = CARTESIAN_POINT('',(178.504745,-57.807556,1.585)); +#229618 = VECTOR('',#229619,1.); +#229619 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#229620 = ORIENTED_EDGE('',*,*,#229621,.T.); +#229621 = EDGE_CURVE('',#229614,#229622,#229624,.T.); +#229622 = VERTEX_POINT('',#229623); +#229623 = CARTESIAN_POINT('',(178.354745,-58.347919,1.585)); +#229624 = CIRCLE('',#229625,7.500006711464E-02); +#229625 = AXIS2_PLACEMENT_3D('',#229626,#229627,#229628); +#229626 = CARTESIAN_POINT('',(178.42974506711,-58.34791906711,1.585)); +#229627 = DIRECTION('',(-0.,0.,-1.)); +#229628 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#229629 = ORIENTED_EDGE('',*,*,#229630,.T.); +#229630 = EDGE_CURVE('',#229622,#229631,#229633,.T.); +#229631 = VERTEX_POINT('',#229632); +#229632 = CARTESIAN_POINT('',(178.356186,-57.66662,1.585)); +#229633 = LINE('',#229634,#229635); +#229634 = CARTESIAN_POINT('',(178.354745,-58.347919,1.585)); +#229635 = VECTOR('',#229636,1.); +#229636 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#229637 = ORIENTED_EDGE('',*,*,#229638,.T.); +#229638 = EDGE_CURVE('',#229631,#229639,#229641,.T.); +#229639 = VERTEX_POINT('',#229640); +#229640 = CARTESIAN_POINT('',(178.367385,-57.639584,1.585)); +#229641 = LINE('',#229642,#229643); +#229642 = CARTESIAN_POINT('',(178.356186,-57.66662,1.585)); +#229643 = VECTOR('',#229644,1.); +#229644 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229645 = ORIENTED_EDGE('',*,*,#229646,.T.); +#229646 = EDGE_CURVE('',#229639,#229497,#229647,.T.); +#229647 = LINE('',#229648,#229649); +#229648 = CARTESIAN_POINT('',(178.367385,-57.639584,1.585)); +#229649 = VECTOR('',#229650,1.); +#229650 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#229651 = PLANE('',#229652); +#229652 = AXIS2_PLACEMENT_3D('',#229653,#229654,#229655); +#229653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229654 = DIRECTION('',(0.,0.,1.)); +#229655 = DIRECTION('',(1.,0.,-0.)); +#229656 = SHELL_BASED_SURFACE_MODEL('',(#229657)); +#229657 = OPEN_SHELL('',(#229658)); +#229658 = ADVANCED_FACE('',(#229659,#229817),#229887,.T.); +#229659 = FACE_BOUND('',#229660,.F.); +#229660 = EDGE_LOOP('',(#229661,#229672,#229680,#229689,#229697,#229705, + #229713,#229722,#229730,#229738,#229747,#229755,#229763,#229771, + #229779,#229787,#229795,#229803,#229811)); +#229661 = ORIENTED_EDGE('',*,*,#229662,.T.); +#229662 = EDGE_CURVE('',#229663,#229665,#229667,.T.); +#229663 = VERTEX_POINT('',#229664); +#229664 = CARTESIAN_POINT('',(206.532818,-57.271886,1.585)); +#229665 = VERTEX_POINT('',#229666); +#229666 = CARTESIAN_POINT('',(207.048513,-57.277252,1.585)); +#229667 = CIRCLE('',#229668,0.45076336239); +#229668 = AXIS2_PLACEMENT_3D('',#229669,#229670,#229671); +#229669 = CARTESIAN_POINT('',(206.78681860196,-57.64427195982,1.585)); +#229670 = DIRECTION('',(0.,0.,-1.)); +#229671 = DIRECTION('',(-0.563489899928,0.826122952519,0.)); +#229672 = ORIENTED_EDGE('',*,*,#229673,.T.); +#229673 = EDGE_CURVE('',#229665,#229674,#229676,.T.); +#229674 = VERTEX_POINT('',#229675); +#229675 = CARTESIAN_POINT('',(207.111967,-57.342782,1.585)); +#229676 = LINE('',#229677,#229678); +#229677 = CARTESIAN_POINT('',(207.048513,-57.277252,1.585)); +#229678 = VECTOR('',#229679,1.); +#229679 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#229680 = ORIENTED_EDGE('',*,*,#229681,.T.); +#229681 = EDGE_CURVE('',#229674,#229682,#229684,.T.); +#229682 = VERTEX_POINT('',#229683); +#229683 = CARTESIAN_POINT('',(207.1066,-57.810859,1.585)); +#229684 = CIRCLE('',#229685,0.397465645887); +#229685 = AXIS2_PLACEMENT_3D('',#229686,#229687,#229688); +#229686 = CARTESIAN_POINT('',(206.78806059713,-57.57313733821,1.585)); +#229687 = DIRECTION('',(0.,0.,-1.)); +#229688 = DIRECTION('',(0.814929305758,0.579560373574,0.)); +#229689 = ORIENTED_EDGE('',*,*,#229690,.T.); +#229690 = EDGE_CURVE('',#229682,#229691,#229693,.T.); +#229691 = VERTEX_POINT('',#229692); +#229692 = CARTESIAN_POINT('',(207.041067,-57.874312,1.585)); +#229693 = LINE('',#229694,#229695); +#229694 = CARTESIAN_POINT('',(207.1066,-57.810859,1.585)); +#229695 = VECTOR('',#229696,1.); +#229696 = DIRECTION('',(-0.718416027676,-0.695613693927,0.)); +#229697 = ORIENTED_EDGE('',*,*,#229698,.T.); +#229698 = EDGE_CURVE('',#229691,#229699,#229701,.T.); +#229699 = VERTEX_POINT('',#229700); +#229700 = CARTESIAN_POINT('',(206.920624,-57.932372,1.585)); +#229701 = LINE('',#229702,#229703); +#229702 = CARTESIAN_POINT('',(207.041067,-57.874312,1.585)); +#229703 = VECTOR('',#229704,1.); +#229704 = DIRECTION('',(-0.900800079444,-0.434234057708,0.)); +#229705 = ORIENTED_EDGE('',*,*,#229706,.T.); +#229706 = EDGE_CURVE('',#229699,#229707,#229709,.T.); +#229707 = VERTEX_POINT('',#229708); +#229708 = CARTESIAN_POINT('',(206.50685,-57.931574,1.585)); +#229709 = LINE('',#229710,#229711); +#229710 = CARTESIAN_POINT('',(206.920624,-57.932372,1.585)); +#229711 = VECTOR('',#229712,1.); +#229712 = DIRECTION('',(-0.999998140277,1.928585449894E-03,0.)); +#229713 = ORIENTED_EDGE('',*,*,#229714,.T.); +#229714 = EDGE_CURVE('',#229707,#229715,#229717,.T.); +#229715 = VERTEX_POINT('',#229716); +#229716 = CARTESIAN_POINT('',(206.077006,-57.701878,1.585)); +#229717 = CIRCLE('',#229718,0.610108760528); +#229718 = AXIS2_PLACEMENT_3D('',#229719,#229720,#229721); +#229719 = CARTESIAN_POINT('',(206.55554088862,-57.3234112775,1.585)); +#229720 = DIRECTION('',(0.,0.,-1.)); +#229721 = DIRECTION('',(-7.980689965079E-02,-0.996810342426,-0.)); +#229722 = ORIENTED_EDGE('',*,*,#229723,.T.); +#229723 = EDGE_CURVE('',#229715,#229724,#229726,.T.); +#229724 = VERTEX_POINT('',#229725); +#229725 = CARTESIAN_POINT('',(206.02291,-57.587731,1.585)); +#229726 = LINE('',#229727,#229728); +#229727 = CARTESIAN_POINT('',(206.077006,-57.701878,1.585)); +#229728 = VECTOR('',#229729,1.); +#229729 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#229730 = ORIENTED_EDGE('',*,*,#229731,.T.); +#229731 = EDGE_CURVE('',#229724,#229732,#229734,.T.); +#229732 = VERTEX_POINT('',#229733); +#229733 = CARTESIAN_POINT('',(206.02291,-57.367991,1.585)); +#229734 = LINE('',#229735,#229736); +#229735 = CARTESIAN_POINT('',(206.02291,-57.587731,1.585)); +#229736 = VECTOR('',#229737,1.); +#229737 = DIRECTION('',(0.,1.,0.)); +#229738 = ORIENTED_EDGE('',*,*,#229739,.T.); +#229739 = EDGE_CURVE('',#229732,#229740,#229742,.T.); +#229740 = VERTEX_POINT('',#229741); +#229741 = CARTESIAN_POINT('',(206.171469,-57.382623,1.585)); +#229742 = CIRCLE('',#229743,7.500006711464E-02); +#229743 = AXIS2_PLACEMENT_3D('',#229744,#229745,#229746); +#229744 = CARTESIAN_POINT('',(206.09646893288,-57.38262293288,1.585)); +#229745 = DIRECTION('',(0.,0.,-1.)); +#229746 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#229747 = ORIENTED_EDGE('',*,*,#229748,.T.); +#229748 = EDGE_CURVE('',#229740,#229749,#229751,.T.); +#229749 = VERTEX_POINT('',#229750); +#229750 = CARTESIAN_POINT('',(206.171469,-57.555394,1.585)); +#229751 = LINE('',#229752,#229753); +#229752 = CARTESIAN_POINT('',(206.171469,-57.382623,1.585)); +#229753 = VECTOR('',#229754,1.); +#229754 = DIRECTION('',(0.,-1.,0.)); +#229755 = ORIENTED_EDGE('',*,*,#229756,.T.); +#229756 = EDGE_CURVE('',#229749,#229757,#229759,.T.); +#229757 = VERTEX_POINT('',#229758); +#229758 = CARTESIAN_POINT('',(206.205727,-57.62391,1.585)); +#229759 = LINE('',#229760,#229761); +#229760 = CARTESIAN_POINT('',(206.171469,-57.555394,1.585)); +#229761 = VECTOR('',#229762,1.); +#229762 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#229763 = ORIENTED_EDGE('',*,*,#229764,.T.); +#229764 = EDGE_CURVE('',#229757,#229765,#229767,.T.); +#229765 = VERTEX_POINT('',#229766); +#229766 = CARTESIAN_POINT('',(206.239487,-57.65767,1.585)); +#229767 = LINE('',#229768,#229769); +#229768 = CARTESIAN_POINT('',(206.205727,-57.62391,1.585)); +#229769 = VECTOR('',#229770,1.); +#229770 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#229771 = ORIENTED_EDGE('',*,*,#229772,.T.); +#229772 = EDGE_CURVE('',#229765,#229773,#229775,.T.); +#229773 = VERTEX_POINT('',#229774); +#229774 = CARTESIAN_POINT('',(206.365358,-57.741584,1.585)); +#229775 = LINE('',#229776,#229777); +#229776 = CARTESIAN_POINT('',(206.239487,-57.65767,1.585)); +#229777 = VECTOR('',#229778,1.); +#229778 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#229779 = ORIENTED_EDGE('',*,*,#229780,.T.); +#229780 = EDGE_CURVE('',#229773,#229781,#229783,.T.); +#229781 = VERTEX_POINT('',#229782); +#229782 = CARTESIAN_POINT('',(206.439454,-57.760108,1.585)); +#229783 = LINE('',#229784,#229785); +#229784 = CARTESIAN_POINT('',(206.365358,-57.741584,1.585)); +#229785 = VECTOR('',#229786,1.); +#229786 = DIRECTION('',(0.970142500145,-0.242535625036,0.)); +#229787 = ORIENTED_EDGE('',*,*,#229788,.T.); +#229788 = EDGE_CURVE('',#229781,#229789,#229791,.T.); +#229789 = VERTEX_POINT('',#229790); +#229790 = CARTESIAN_POINT('',(206.403862,-57.682969,1.585)); +#229791 = LINE('',#229792,#229793); +#229792 = CARTESIAN_POINT('',(206.439454,-57.760108,1.585)); +#229793 = VECTOR('',#229794,1.); +#229794 = DIRECTION('',(-0.418955163734,0.90800692221,0.)); +#229795 = ORIENTED_EDGE('',*,*,#229796,.T.); +#229796 = EDGE_CURVE('',#229789,#229797,#229799,.T.); +#229797 = VERTEX_POINT('',#229798); +#229798 = CARTESIAN_POINT('',(206.405084,-57.458052,1.585)); +#229799 = LINE('',#229800,#229801); +#229800 = CARTESIAN_POINT('',(206.403862,-57.682969,1.585)); +#229801 = VECTOR('',#229802,1.); +#229802 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#229803 = ORIENTED_EDGE('',*,*,#229804,.T.); +#229804 = EDGE_CURVE('',#229797,#229805,#229807,.T.); +#229805 = VERTEX_POINT('',#229806); +#229806 = CARTESIAN_POINT('',(206.467288,-57.335339,1.585)); +#229807 = LINE('',#229808,#229809); +#229808 = CARTESIAN_POINT('',(206.405084,-57.458052,1.585)); +#229809 = VECTOR('',#229810,1.); +#229810 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#229811 = ORIENTED_EDGE('',*,*,#229812,.T.); +#229812 = EDGE_CURVE('',#229805,#229663,#229813,.T.); +#229813 = LINE('',#229814,#229815); +#229814 = CARTESIAN_POINT('',(206.467288,-57.335339,1.585)); +#229815 = VECTOR('',#229816,1.); +#229816 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#229817 = FACE_BOUND('',#229818,.F.); +#229818 = EDGE_LOOP('',(#229819,#229830,#229838,#229847,#229855,#229864, + #229872,#229881)); +#229819 = ORIENTED_EDGE('',*,*,#229820,.T.); +#229820 = EDGE_CURVE('',#229821,#229823,#229825,.T.); +#229821 = VERTEX_POINT('',#229822); +#229822 = CARTESIAN_POINT('',(206.956803,-57.396643,1.585)); +#229823 = VERTEX_POINT('',#229824); +#229824 = CARTESIAN_POINT('',(206.617086,-57.396643,1.585)); +#229825 = CIRCLE('',#229826,0.305621483548); +#229826 = AXIS2_PLACEMENT_3D('',#229827,#229828,#229829); +#229827 = CARTESIAN_POINT('',(206.7869445,-57.650715,1.585)); +#229828 = DIRECTION('',(0.,0.,1.)); +#229829 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#229830 = ORIENTED_EDGE('',*,*,#229831,.T.); +#229831 = EDGE_CURVE('',#229823,#229832,#229834,.T.); +#229832 = VERTEX_POINT('',#229833); +#229833 = CARTESIAN_POINT('',(206.586679,-57.42705,1.585)); +#229834 = LINE('',#229835,#229836); +#229835 = CARTESIAN_POINT('',(206.617086,-57.396643,1.585)); +#229836 = VECTOR('',#229837,1.); +#229837 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#229838 = ORIENTED_EDGE('',*,*,#229839,.T.); +#229839 = EDGE_CURVE('',#229832,#229840,#229842,.T.); +#229840 = VERTEX_POINT('',#229841); +#229841 = CARTESIAN_POINT('',(206.586679,-57.719148,1.585)); +#229842 = CIRCLE('',#229843,0.252889603602); +#229843 = AXIS2_PLACEMENT_3D('',#229844,#229845,#229846); +#229844 = CARTESIAN_POINT('',(206.793132,-57.573099,1.585)); +#229845 = DIRECTION('',(0.,0.,1.)); +#229846 = DIRECTION('',(-0.816375988018,0.577520775547,0.)); +#229847 = ORIENTED_EDGE('',*,*,#229848,.T.); +#229848 = EDGE_CURVE('',#229840,#229849,#229851,.T.); +#229849 = VERTEX_POINT('',#229850); +#229850 = CARTESIAN_POINT('',(206.617086,-57.749555,1.585)); +#229851 = LINE('',#229852,#229853); +#229852 = CARTESIAN_POINT('',(206.586679,-57.719148,1.585)); +#229853 = VECTOR('',#229854,1.); +#229854 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#229855 = ORIENTED_EDGE('',*,*,#229856,.T.); +#229856 = EDGE_CURVE('',#229849,#229857,#229859,.T.); +#229857 = VERTEX_POINT('',#229858); +#229858 = CARTESIAN_POINT('',(206.956803,-57.749554,1.585)); +#229859 = CIRCLE('',#229860,0.305619824406); +#229860 = AXIS2_PLACEMENT_3D('',#229861,#229862,#229863); +#229861 = CARTESIAN_POINT('',(206.78694375211,-57.49548449577,1.585)); +#229862 = DIRECTION('',(0.,0.,1.)); +#229863 = DIRECTION('',(-0.555781197907,-0.831328611352,0.)); +#229864 = ORIENTED_EDGE('',*,*,#229865,.T.); +#229865 = EDGE_CURVE('',#229857,#229866,#229868,.T.); +#229866 = VERTEX_POINT('',#229867); +#229867 = CARTESIAN_POINT('',(206.987211,-57.719147,1.585)); +#229868 = LINE('',#229869,#229870); +#229869 = CARTESIAN_POINT('',(206.956803,-57.749554,1.585)); +#229870 = VECTOR('',#229871,1.); +#229871 = DIRECTION('',(0.707118408268,0.707095153914,0.)); +#229872 = ORIENTED_EDGE('',*,*,#229873,.T.); +#229873 = EDGE_CURVE('',#229866,#229874,#229876,.T.); +#229874 = VERTEX_POINT('',#229875); +#229875 = CARTESIAN_POINT('',(206.987211,-57.42705,1.585)); +#229876 = CIRCLE('',#229877,0.252886650841); +#229877 = AXIS2_PLACEMENT_3D('',#229878,#229879,#229880); +#229878 = CARTESIAN_POINT('',(206.7807612632,-57.5730985,1.585)); +#229879 = DIRECTION('',(0.,-0.,1.)); +#229880 = DIRECTION('',(0.816372616368,-0.577525541638,-0.)); +#229881 = ORIENTED_EDGE('',*,*,#229882,.T.); +#229882 = EDGE_CURVE('',#229874,#229821,#229883,.T.); +#229883 = LINE('',#229884,#229885); +#229884 = CARTESIAN_POINT('',(206.987211,-57.42705,1.585)); +#229885 = VECTOR('',#229886,1.); +#229886 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#229887 = PLANE('',#229888); +#229888 = AXIS2_PLACEMENT_3D('',#229889,#229890,#229891); +#229889 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229890 = DIRECTION('',(0.,0.,1.)); +#229891 = DIRECTION('',(1.,0.,-0.)); +#229892 = SHELL_BASED_SURFACE_MODEL('',(#229893)); +#229893 = OPEN_SHELL('',(#229894)); +#229894 = ADVANCED_FACE('',(#229895),#229964,.T.); +#229895 = FACE_BOUND('',#229896,.F.); +#229896 = EDGE_LOOP('',(#229897,#229908,#229916,#229924,#229933,#229941, + #229950,#229958)); +#229897 = ORIENTED_EDGE('',*,*,#229898,.T.); +#229898 = EDGE_CURVE('',#229899,#229901,#229903,.T.); +#229899 = VERTEX_POINT('',#229900); +#229900 = CARTESIAN_POINT('',(86.826217,-57.480139,1.585)); +#229901 = VERTEX_POINT('',#229902); +#229902 = CARTESIAN_POINT('',(86.94165,-57.5031,1.585)); +#229903 = CIRCLE('',#229904,6.000007318647E-02); +#229904 = AXIS2_PLACEMENT_3D('',#229905,#229906,#229907); +#229905 = CARTESIAN_POINT('',(86.881649926814,-57.50309982331,1.585)); +#229906 = DIRECTION('',(0.,0.,-1.)); +#229907 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#229908 = ORIENTED_EDGE('',*,*,#229909,.T.); +#229909 = EDGE_CURVE('',#229901,#229910,#229912,.T.); +#229910 = VERTEX_POINT('',#229911); +#229911 = CARTESIAN_POINT('',(86.94165,-57.7131,1.585)); +#229912 = LINE('',#229913,#229914); +#229913 = CARTESIAN_POINT('',(86.94165,-57.5031,1.585)); +#229914 = VECTOR('',#229915,1.); +#229915 = DIRECTION('',(0.,-1.,0.)); +#229916 = ORIENTED_EDGE('',*,*,#229917,.T.); +#229917 = EDGE_CURVE('',#229910,#229918,#229920,.T.); +#229918 = VERTEX_POINT('',#229919); +#229919 = CARTESIAN_POINT('',(93.30165,-57.7131,1.585)); +#229920 = LINE('',#229921,#229922); +#229921 = CARTESIAN_POINT('',(86.94165,-57.7131,1.585)); +#229922 = VECTOR('',#229923,1.); +#229923 = DIRECTION('',(1.,0.,0.)); +#229924 = ORIENTED_EDGE('',*,*,#229925,.T.); +#229925 = EDGE_CURVE('',#229918,#229926,#229928,.T.); +#229926 = VERTEX_POINT('',#229927); +#229927 = CARTESIAN_POINT('',(93.30165,-57.8331,1.585)); +#229928 = CIRCLE('',#229929,6.000000000043E-02); +#229929 = AXIS2_PLACEMENT_3D('',#229930,#229931,#229932); +#229930 = CARTESIAN_POINT('',(93.301650225588,-57.7731,1.585)); +#229931 = DIRECTION('',(0.,0.,-1.)); +#229932 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#229933 = ORIENTED_EDGE('',*,*,#229934,.T.); +#229934 = EDGE_CURVE('',#229926,#229935,#229937,.T.); +#229935 = VERTEX_POINT('',#229936); +#229936 = CARTESIAN_POINT('',(86.88165,-57.8331,1.585)); +#229937 = LINE('',#229938,#229939); +#229938 = CARTESIAN_POINT('',(93.30165,-57.8331,1.585)); +#229939 = VECTOR('',#229940,1.); +#229940 = DIRECTION('',(-1.,0.,0.)); +#229941 = ORIENTED_EDGE('',*,*,#229942,.T.); +#229942 = EDGE_CURVE('',#229935,#229943,#229945,.T.); +#229943 = VERTEX_POINT('',#229944); +#229944 = CARTESIAN_POINT('',(86.82165,-57.7731,1.585)); +#229945 = CIRCLE('',#229946,5.99993201626E-02); +#229946 = AXIS2_PLACEMENT_3D('',#229947,#229948,#229949); +#229947 = CARTESIAN_POINT('',(86.881649320159,-57.77310067984,1.585)); +#229948 = DIRECTION('',(0.,0.,-1.)); +#229949 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#229950 = ORIENTED_EDGE('',*,*,#229951,.T.); +#229951 = EDGE_CURVE('',#229943,#229952,#229954,.T.); +#229952 = VERTEX_POINT('',#229953); +#229953 = CARTESIAN_POINT('',(86.82165,-57.5031,1.585)); +#229954 = LINE('',#229955,#229956); +#229955 = CARTESIAN_POINT('',(86.82165,-57.7731,1.585)); +#229956 = VECTOR('',#229957,1.); +#229957 = DIRECTION('',(0.,1.,0.)); +#229958 = ORIENTED_EDGE('',*,*,#229959,.T.); +#229959 = EDGE_CURVE('',#229952,#229899,#229960,.T.); +#229960 = LINE('',#229961,#229962); +#229961 = CARTESIAN_POINT('',(86.82165,-57.5031,1.585)); +#229962 = VECTOR('',#229963,1.); +#229963 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#229964 = PLANE('',#229965); +#229965 = AXIS2_PLACEMENT_3D('',#229966,#229967,#229968); +#229966 = CARTESIAN_POINT('',(0.,0.,1.585)); +#229967 = DIRECTION('',(0.,0.,1.)); +#229968 = DIRECTION('',(1.,0.,-0.)); +#229969 = SHELL_BASED_SURFACE_MODEL('',(#229970)); +#229970 = OPEN_SHELL('',(#229971)); +#229971 = ADVANCED_FACE('',(#229972,#230042),#230109,.T.); +#229972 = FACE_BOUND('',#229973,.F.); +#229973 = EDGE_LOOP('',(#229974,#229985,#229993,#230002,#230010,#230019, + #230027,#230036)); +#229974 = ORIENTED_EDGE('',*,*,#229975,.T.); +#229975 = EDGE_CURVE('',#229976,#229978,#229980,.T.); +#229976 = VERTEX_POINT('',#229977); +#229977 = CARTESIAN_POINT('',(108.40165,-54.9931,1.585)); +#229978 = VERTEX_POINT('',#229979); +#229979 = CARTESIAN_POINT('',(108.46165,-54.9331,1.585)); +#229980 = CIRCLE('',#229981,5.999932016258E-02); +#229981 = AXIS2_PLACEMENT_3D('',#229982,#229983,#229984); +#229982 = CARTESIAN_POINT('',(108.46164932015,-54.99309932015,1.585)); +#229983 = DIRECTION('',(0.,0.,-1.)); +#229984 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#229985 = ORIENTED_EDGE('',*,*,#229986,.T.); +#229986 = EDGE_CURVE('',#229978,#229987,#229989,.T.); +#229987 = VERTEX_POINT('',#229988); +#229988 = CARTESIAN_POINT('',(156.78165,-54.9331,1.585)); +#229989 = LINE('',#229990,#229991); +#229990 = CARTESIAN_POINT('',(108.46165,-54.9331,1.585)); +#229991 = VECTOR('',#229992,1.); +#229992 = DIRECTION('',(1.,0.,0.)); +#229993 = ORIENTED_EDGE('',*,*,#229994,.T.); +#229994 = EDGE_CURVE('',#229987,#229995,#229997,.T.); +#229995 = VERTEX_POINT('',#229996); +#229996 = CARTESIAN_POINT('',(156.84165,-54.9931,1.585)); +#229997 = CIRCLE('',#229998,5.999932016256E-02); +#229998 = AXIS2_PLACEMENT_3D('',#229999,#230000,#230001); +#229999 = CARTESIAN_POINT('',(156.78165067984,-54.99309932015,1.585)); +#230000 = DIRECTION('',(0.,0.,-1.)); +#230001 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#230002 = ORIENTED_EDGE('',*,*,#230003,.T.); +#230003 = EDGE_CURVE('',#229995,#230004,#230006,.T.); +#230004 = VERTEX_POINT('',#230005); +#230005 = CARTESIAN_POINT('',(156.84165,-57.6531,1.585)); +#230006 = LINE('',#230007,#230008); +#230007 = CARTESIAN_POINT('',(156.84165,-54.9931,1.585)); +#230008 = VECTOR('',#230009,1.); +#230009 = DIRECTION('',(0.,-1.,0.)); +#230010 = ORIENTED_EDGE('',*,*,#230011,.T.); +#230011 = EDGE_CURVE('',#230004,#230012,#230014,.T.); +#230012 = VERTEX_POINT('',#230013); +#230013 = CARTESIAN_POINT('',(156.78165,-57.7131,1.585)); +#230014 = CIRCLE('',#230015,5.999932016254E-02); +#230015 = AXIS2_PLACEMENT_3D('',#230016,#230017,#230018); +#230016 = CARTESIAN_POINT('',(156.78165067984,-57.65310067984,1.585)); +#230017 = DIRECTION('',(0.,0.,-1.)); +#230018 = DIRECTION('',(0.999999999936,1.133081683199E-05,0.)); +#230019 = ORIENTED_EDGE('',*,*,#230020,.T.); +#230020 = EDGE_CURVE('',#230012,#230021,#230023,.T.); +#230021 = VERTEX_POINT('',#230022); +#230022 = CARTESIAN_POINT('',(108.46165,-57.7131,1.585)); +#230023 = LINE('',#230024,#230025); +#230024 = CARTESIAN_POINT('',(156.78165,-57.7131,1.585)); +#230025 = VECTOR('',#230026,1.); +#230026 = DIRECTION('',(-1.,0.,0.)); +#230027 = ORIENTED_EDGE('',*,*,#230028,.T.); +#230028 = EDGE_CURVE('',#230021,#230029,#230031,.T.); +#230029 = VERTEX_POINT('',#230030); +#230030 = CARTESIAN_POINT('',(108.40165,-57.6531,1.585)); +#230031 = CIRCLE('',#230032,5.999932016257E-02); +#230032 = AXIS2_PLACEMENT_3D('',#230033,#230034,#230035); +#230033 = CARTESIAN_POINT('',(108.46164932015,-57.65310067984,1.585)); +#230034 = DIRECTION('',(0.,0.,-1.)); +#230035 = DIRECTION('',(1.133081635828E-05,-0.999999999936,0.)); +#230036 = ORIENTED_EDGE('',*,*,#230037,.T.); +#230037 = EDGE_CURVE('',#230029,#229976,#230038,.T.); +#230038 = LINE('',#230039,#230040); +#230039 = CARTESIAN_POINT('',(108.40165,-57.6531,1.585)); +#230040 = VECTOR('',#230041,1.); +#230041 = DIRECTION('',(0.,1.,0.)); +#230042 = FACE_BOUND('',#230043,.F.); +#230043 = EDGE_LOOP('',(#230044,#230054,#230062,#230070,#230078,#230086, + #230095,#230103)); +#230044 = ORIENTED_EDGE('',*,*,#230045,.T.); +#230045 = EDGE_CURVE('',#230046,#230048,#230050,.T.); +#230046 = VERTEX_POINT('',#230047); +#230047 = CARTESIAN_POINT('',(156.72165,-57.5931,1.585)); +#230048 = VERTEX_POINT('',#230049); +#230049 = CARTESIAN_POINT('',(156.72165,-55.0531,1.585)); +#230050 = LINE('',#230051,#230052); +#230051 = CARTESIAN_POINT('',(156.72165,-57.5931,1.585)); +#230052 = VECTOR('',#230053,1.); +#230053 = DIRECTION('',(0.,1.,0.)); +#230054 = ORIENTED_EDGE('',*,*,#230055,.T.); +#230055 = EDGE_CURVE('',#230048,#230056,#230058,.T.); +#230056 = VERTEX_POINT('',#230057); +#230057 = CARTESIAN_POINT('',(108.52165,-55.0531,1.585)); +#230058 = LINE('',#230059,#230060); +#230059 = CARTESIAN_POINT('',(156.72165,-55.0531,1.585)); +#230060 = VECTOR('',#230061,1.); +#230061 = DIRECTION('',(-1.,0.,0.)); +#230062 = ORIENTED_EDGE('',*,*,#230063,.T.); +#230063 = EDGE_CURVE('',#230056,#230064,#230066,.T.); +#230064 = VERTEX_POINT('',#230065); +#230065 = CARTESIAN_POINT('',(108.52165,-57.5931,1.585)); +#230066 = LINE('',#230067,#230068); +#230067 = CARTESIAN_POINT('',(108.52165,-55.0531,1.585)); +#230068 = VECTOR('',#230069,1.); +#230069 = DIRECTION('',(0.,-1.,0.)); +#230070 = ORIENTED_EDGE('',*,*,#230071,.T.); +#230071 = EDGE_CURVE('',#230064,#230072,#230074,.T.); +#230072 = VERTEX_POINT('',#230073); +#230073 = CARTESIAN_POINT('',(124.103194,-57.5931,1.585)); +#230074 = LINE('',#230075,#230076); +#230075 = CARTESIAN_POINT('',(108.52165,-57.5931,1.585)); +#230076 = VECTOR('',#230077,1.); +#230077 = DIRECTION('',(1.,0.,0.)); +#230078 = ORIENTED_EDGE('',*,*,#230079,.T.); +#230079 = EDGE_CURVE('',#230072,#230080,#230082,.T.); +#230080 = VERTEX_POINT('',#230081); +#230081 = CARTESIAN_POINT('',(124.109614,-57.59952,1.585)); +#230082 = LINE('',#230083,#230084); +#230083 = CARTESIAN_POINT('',(124.103194,-57.5931,1.585)); +#230084 = VECTOR('',#230085,1.); +#230085 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#230086 = ORIENTED_EDGE('',*,*,#230087,.T.); +#230087 = EDGE_CURVE('',#230080,#230088,#230090,.T.); +#230088 = VERTEX_POINT('',#230089); +#230089 = CARTESIAN_POINT('',(124.276286,-57.59952,1.585)); +#230090 = CIRCLE('',#230091,0.149999353165); +#230091 = AXIS2_PLACEMENT_3D('',#230092,#230093,#230094); +#230092 = CARTESIAN_POINT('',(124.19295,-57.47480064683,1.585)); +#230093 = DIRECTION('',(0.,0.,1.)); +#230094 = DIRECTION('',(-0.555575729107,-0.831465939908,0.)); +#230095 = ORIENTED_EDGE('',*,*,#230096,.T.); +#230096 = EDGE_CURVE('',#230088,#230097,#230099,.T.); +#230097 = VERTEX_POINT('',#230098); +#230098 = CARTESIAN_POINT('',(124.282706,-57.5931,1.585)); +#230099 = LINE('',#230100,#230101); +#230100 = CARTESIAN_POINT('',(124.276286,-57.59952,1.585)); +#230101 = VECTOR('',#230102,1.); +#230102 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#230103 = ORIENTED_EDGE('',*,*,#230104,.T.); +#230104 = EDGE_CURVE('',#230097,#230046,#230105,.T.); +#230105 = LINE('',#230106,#230107); +#230106 = CARTESIAN_POINT('',(124.282706,-57.5931,1.585)); +#230107 = VECTOR('',#230108,1.); +#230108 = DIRECTION('',(1.,0.,0.)); +#230109 = PLANE('',#230110); +#230110 = AXIS2_PLACEMENT_3D('',#230111,#230112,#230113); +#230111 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230112 = DIRECTION('',(0.,0.,1.)); +#230113 = DIRECTION('',(1.,0.,-0.)); +#230114 = SHELL_BASED_SURFACE_MODEL('',(#230115)); +#230115 = OPEN_SHELL('',(#230116)); +#230116 = ADVANCED_FACE('',(#230117,#230228),#230287,.T.); +#230117 = FACE_BOUND('',#230118,.F.); +#230118 = EDGE_LOOP('',(#230119,#230129,#230138,#230146,#230154,#230162, + #230171,#230179,#230188,#230196,#230205,#230213,#230222)); +#230119 = ORIENTED_EDGE('',*,*,#230120,.T.); +#230120 = EDGE_CURVE('',#230121,#230123,#230125,.T.); +#230121 = VERTEX_POINT('',#230122); +#230122 = CARTESIAN_POINT('',(159.759468,-56.911227,1.585)); +#230123 = VERTEX_POINT('',#230124); +#230124 = CARTESIAN_POINT('',(160.130573,-56.653214,1.585)); +#230125 = LINE('',#230126,#230127); +#230126 = CARTESIAN_POINT('',(159.759468,-56.911227,1.585)); +#230127 = VECTOR('',#230128,1.); +#230128 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#230129 = ORIENTED_EDGE('',*,*,#230130,.T.); +#230130 = EDGE_CURVE('',#230123,#230131,#230133,.T.); +#230131 = VERTEX_POINT('',#230132); +#230132 = CARTESIAN_POINT('',(160.203779,-56.783309,1.585)); +#230133 = CIRCLE('',#230134,7.500005951703E-02); +#230134 = AXIS2_PLACEMENT_3D('',#230135,#230136,#230137); +#230135 = CARTESIAN_POINT('',(160.16076874739,-56.72186693705,1.585)); +#230136 = DIRECTION('',(0.,0.,-1.)); +#230137 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#230138 = ORIENTED_EDGE('',*,*,#230139,.T.); +#230139 = EDGE_CURVE('',#230131,#230140,#230142,.T.); +#230140 = VERTEX_POINT('',#230141); +#230141 = CARTESIAN_POINT('',(159.759578,-57.094249,1.585)); +#230142 = LINE('',#230143,#230144); +#230143 = CARTESIAN_POINT('',(160.203779,-56.783309,1.585)); +#230144 = VECTOR('',#230145,1.); +#230145 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#230146 = ORIENTED_EDGE('',*,*,#230147,.T.); +#230147 = EDGE_CURVE('',#230140,#230148,#230150,.T.); +#230148 = VERTEX_POINT('',#230149); +#230149 = CARTESIAN_POINT('',(159.759578,-57.218295,1.585)); +#230150 = LINE('',#230151,#230152); +#230151 = CARTESIAN_POINT('',(159.759578,-57.094249,1.585)); +#230152 = VECTOR('',#230153,1.); +#230153 = DIRECTION('',(0.,-1.,0.)); +#230154 = ORIENTED_EDGE('',*,*,#230155,.T.); +#230155 = EDGE_CURVE('',#230148,#230156,#230158,.T.); +#230156 = VERTEX_POINT('',#230157); +#230157 = CARTESIAN_POINT('',(160.175401,-57.219736,1.585)); +#230158 = LINE('',#230159,#230160); +#230159 = CARTESIAN_POINT('',(159.759578,-57.218295,1.585)); +#230160 = VECTOR('',#230161,1.); +#230161 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#230162 = ORIENTED_EDGE('',*,*,#230163,.T.); +#230163 = EDGE_CURVE('',#230156,#230164,#230166,.T.); +#230164 = VERTEX_POINT('',#230165); +#230165 = CARTESIAN_POINT('',(160.160769,-57.368295,1.585)); +#230166 = CIRCLE('',#230167,7.500006711465E-02); +#230167 = AXIS2_PLACEMENT_3D('',#230168,#230169,#230170); +#230168 = CARTESIAN_POINT('',(160.16076906711,-57.29329493288,1.585)); +#230169 = DIRECTION('',(0.,0.,-1.)); +#230170 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#230171 = ORIENTED_EDGE('',*,*,#230172,.T.); +#230172 = EDGE_CURVE('',#230164,#230173,#230175,.T.); +#230173 = VERTEX_POINT('',#230174); +#230174 = CARTESIAN_POINT('',(159.146137,-57.366854,1.585)); +#230175 = LINE('',#230176,#230177); +#230176 = CARTESIAN_POINT('',(160.160769,-57.368295,1.585)); +#230177 = VECTOR('',#230178,1.); +#230178 = DIRECTION('',(-0.99999899149,1.420217918165E-03,0.)); +#230179 = ORIENTED_EDGE('',*,*,#230180,.T.); +#230180 = EDGE_CURVE('',#230173,#230181,#230183,.T.); +#230181 = VERTEX_POINT('',#230182); +#230182 = CARTESIAN_POINT('',(159.085769,-57.293295,1.585)); +#230183 = CIRCLE('',#230184,7.500074938983E-02); +#230184 = AXIS2_PLACEMENT_3D('',#230185,#230186,#230187); +#230185 = CARTESIAN_POINT('',(159.16076974938,-57.29329453389,1.585)); +#230186 = DIRECTION('',(0.,0.,-1.)); +#230187 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#230188 = ORIENTED_EDGE('',*,*,#230189,.T.); +#230189 = EDGE_CURVE('',#230181,#230190,#230192,.T.); +#230190 = VERTEX_POINT('',#230191); +#230191 = CARTESIAN_POINT('',(159.088432,-56.892534,1.585)); +#230192 = LINE('',#230193,#230194); +#230193 = CARTESIAN_POINT('',(159.085769,-57.293295,1.585)); +#230194 = VECTOR('',#230195,1.); +#230195 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#230196 = ORIENTED_EDGE('',*,*,#230197,.T.); +#230197 = EDGE_CURVE('',#230190,#230198,#230200,.T.); +#230198 = VERTEX_POINT('',#230199); +#230199 = CARTESIAN_POINT('',(159.336613,-56.648308,1.585)); +#230200 = CIRCLE('',#230201,0.3486213829); +#230201 = AXIS2_PLACEMENT_3D('',#230202,#230203,#230204); +#230202 = CARTESIAN_POINT('',(159.42437322951,-56.98570244383,1.585)); +#230203 = DIRECTION('',(0.,0.,-1.)); +#230204 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#230205 = ORIENTED_EDGE('',*,*,#230206,.T.); +#230206 = EDGE_CURVE('',#230198,#230207,#230209,.T.); +#230207 = VERTEX_POINT('',#230208); +#230208 = CARTESIAN_POINT('',(159.508734,-56.648308,1.585)); +#230209 = LINE('',#230210,#230211); +#230210 = CARTESIAN_POINT('',(159.336613,-56.648308,1.585)); +#230211 = VECTOR('',#230212,1.); +#230212 = DIRECTION('',(1.,0.,0.)); +#230213 = ORIENTED_EDGE('',*,*,#230214,.T.); +#230214 = EDGE_CURVE('',#230207,#230215,#230217,.T.); +#230215 = VERTEX_POINT('',#230216); +#230216 = CARTESIAN_POINT('',(159.758137,-56.897711,1.585)); +#230217 = CIRCLE('',#230218,0.347870264855); +#230218 = AXIS2_PLACEMENT_3D('',#230219,#230220,#230221); +#230219 = CARTESIAN_POINT('',(159.42140626502,-56.98503873497,1.585)); +#230220 = DIRECTION('',(0.,0.,-1.)); +#230221 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#230222 = ORIENTED_EDGE('',*,*,#230223,.T.); +#230223 = EDGE_CURVE('',#230215,#230121,#230224,.T.); +#230224 = LINE('',#230225,#230226); +#230225 = CARTESIAN_POINT('',(159.758137,-56.897711,1.585)); +#230226 = VECTOR('',#230227,1.); +#230227 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#230228 = FACE_BOUND('',#230229,.F.); +#230229 = EDGE_LOOP('',(#230230,#230241,#230249,#230257,#230265,#230273, + #230281)); +#230230 = ORIENTED_EDGE('',*,*,#230231,.T.); +#230231 = EDGE_CURVE('',#230232,#230234,#230236,.T.); +#230232 = VERTEX_POINT('',#230233); +#230233 = CARTESIAN_POINT('',(159.544913,-56.831125,1.585)); +#230234 = VERTEX_POINT('',#230235); +#230235 = CARTESIAN_POINT('',(159.270027,-56.861532,1.585)); +#230236 = CIRCLE('',#230237,0.198386215365); +#230237 = AXIS2_PLACEMENT_3D('',#230238,#230239,#230240); +#230238 = CARTESIAN_POINT('',(159.42310995783,-56.9877171753,1.585)); +#230239 = DIRECTION('',(0.,0.,1.)); +#230240 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#230241 = ORIENTED_EDGE('',*,*,#230242,.T.); +#230242 = EDGE_CURVE('',#230234,#230243,#230245,.T.); +#230243 = VERTEX_POINT('',#230244); +#230244 = CARTESIAN_POINT('',(159.235769,-56.930048,1.585)); +#230245 = LINE('',#230246,#230247); +#230246 = CARTESIAN_POINT('',(159.270027,-56.861532,1.585)); +#230247 = VECTOR('',#230248,1.); +#230248 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#230249 = ORIENTED_EDGE('',*,*,#230250,.T.); +#230250 = EDGE_CURVE('',#230243,#230251,#230253,.T.); +#230251 = VERTEX_POINT('',#230252); +#230252 = CARTESIAN_POINT('',(159.235769,-57.218295,1.585)); +#230253 = LINE('',#230254,#230255); +#230254 = CARTESIAN_POINT('',(159.235769,-56.930048,1.585)); +#230255 = VECTOR('',#230256,1.); +#230256 = DIRECTION('',(0.,-1.,0.)); +#230257 = ORIENTED_EDGE('',*,*,#230258,.T.); +#230258 = EDGE_CURVE('',#230251,#230259,#230261,.T.); +#230259 = VERTEX_POINT('',#230260); +#230260 = CARTESIAN_POINT('',(159.609578,-57.218295,1.585)); +#230261 = LINE('',#230262,#230263); +#230262 = CARTESIAN_POINT('',(159.235769,-57.218295,1.585)); +#230263 = VECTOR('',#230264,1.); +#230264 = DIRECTION('',(1.,0.,0.)); +#230265 = ORIENTED_EDGE('',*,*,#230266,.T.); +#230266 = EDGE_CURVE('',#230259,#230267,#230269,.T.); +#230267 = VERTEX_POINT('',#230268); +#230268 = CARTESIAN_POINT('',(159.609578,-56.930048,1.585)); +#230269 = LINE('',#230270,#230271); +#230270 = CARTESIAN_POINT('',(159.609578,-57.218295,1.585)); +#230271 = VECTOR('',#230272,1.); +#230272 = DIRECTION('',(0.,1.,0.)); +#230273 = ORIENTED_EDGE('',*,*,#230274,.T.); +#230274 = EDGE_CURVE('',#230267,#230275,#230277,.T.); +#230275 = VERTEX_POINT('',#230276); +#230276 = CARTESIAN_POINT('',(159.57532,-56.861532,1.585)); +#230277 = LINE('',#230278,#230279); +#230278 = CARTESIAN_POINT('',(159.609578,-56.930048,1.585)); +#230279 = VECTOR('',#230280,1.); +#230280 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#230281 = ORIENTED_EDGE('',*,*,#230282,.T.); +#230282 = EDGE_CURVE('',#230275,#230232,#230283,.T.); +#230283 = LINE('',#230284,#230285); +#230284 = CARTESIAN_POINT('',(159.57532,-56.861532,1.585)); +#230285 = VECTOR('',#230286,1.); +#230286 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#230287 = PLANE('',#230288); +#230288 = AXIS2_PLACEMENT_3D('',#230289,#230290,#230291); +#230289 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230290 = DIRECTION('',(0.,0.,1.)); +#230291 = DIRECTION('',(1.,0.,-0.)); +#230292 = SHELL_BASED_SURFACE_MODEL('',(#230293)); +#230293 = OPEN_SHELL('',(#230294)); +#230294 = ADVANCED_FACE('',(#230295),#230365,.T.); +#230295 = FACE_BOUND('',#230296,.F.); +#230296 = EDGE_LOOP('',(#230297,#230308,#230316,#230325,#230333,#230342, + #230350,#230359)); +#230297 = ORIENTED_EDGE('',*,*,#230298,.T.); +#230298 = EDGE_CURVE('',#230299,#230301,#230303,.T.); +#230299 = VERTEX_POINT('',#230300); +#230300 = CARTESIAN_POINT('',(103.861837,-56.729992,1.585)); +#230301 = VERTEX_POINT('',#230302); +#230302 = CARTESIAN_POINT('',(103.876469,-56.581433,1.585)); +#230303 = CIRCLE('',#230304,7.500006711464E-02); +#230304 = AXIS2_PLACEMENT_3D('',#230305,#230306,#230307); +#230305 = CARTESIAN_POINT('',(103.87646893288,-56.65643306711,1.585)); +#230306 = DIRECTION('',(0.,0.,-1.)); +#230307 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#230308 = ORIENTED_EDGE('',*,*,#230309,.T.); +#230309 = EDGE_CURVE('',#230301,#230310,#230312,.T.); +#230310 = VERTEX_POINT('',#230311); +#230311 = CARTESIAN_POINT('',(104.598159,-56.582162,1.585)); +#230312 = LINE('',#230313,#230314); +#230313 = CARTESIAN_POINT('',(103.876469,-56.581433,1.585)); +#230314 = VECTOR('',#230315,1.); +#230315 = DIRECTION('',(0.99999948982,-1.01012848741E-03,0.)); +#230316 = ORIENTED_EDGE('',*,*,#230317,.T.); +#230317 = EDGE_CURVE('',#230310,#230318,#230320,.T.); +#230318 = VERTEX_POINT('',#230319); +#230319 = CARTESIAN_POINT('',(104.950739,-56.93474,1.585)); +#230320 = CIRCLE('',#230321,0.383787726409); +#230321 = AXIS2_PLACEMENT_3D('',#230322,#230323,#230324); +#230322 = CARTESIAN_POINT('',(104.56812818139,-56.96477298896,1.585)); +#230323 = DIRECTION('',(0.,0.,-1.)); +#230324 = DIRECTION('',(7.824851224111E-02,0.996933884634,0.)); +#230325 = ORIENTED_EDGE('',*,*,#230326,.T.); +#230326 = EDGE_CURVE('',#230318,#230327,#230329,.T.); +#230327 = VERTEX_POINT('',#230328); +#230328 = CARTESIAN_POINT('',(104.950028,-57.052017,1.585)); +#230329 = LINE('',#230330,#230331); +#230330 = CARTESIAN_POINT('',(104.950739,-56.93474,1.585)); +#230331 = VECTOR('',#230332,1.); +#230332 = DIRECTION('',(-6.062458402253E-03,-0.99998162313,0.)); +#230333 = ORIENTED_EDGE('',*,*,#230334,.T.); +#230334 = EDGE_CURVE('',#230327,#230335,#230337,.T.); +#230335 = VERTEX_POINT('',#230336); +#230336 = CARTESIAN_POINT('',(104.801469,-57.037385,1.585)); +#230337 = CIRCLE('',#230338,7.500006711464E-02); +#230338 = AXIS2_PLACEMENT_3D('',#230339,#230340,#230341); +#230339 = CARTESIAN_POINT('',(104.87646906711,-57.03738506711,1.585)); +#230340 = DIRECTION('',(-0.,0.,-1.)); +#230341 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#230342 = ORIENTED_EDGE('',*,*,#230343,.T.); +#230343 = EDGE_CURVE('',#230335,#230344,#230346,.T.); +#230344 = VERTEX_POINT('',#230345); +#230345 = CARTESIAN_POINT('',(104.801469,-56.954317,1.585)); +#230346 = LINE('',#230347,#230348); +#230347 = CARTESIAN_POINT('',(104.801469,-57.037385,1.585)); +#230348 = VECTOR('',#230349,1.); +#230349 = DIRECTION('',(0.,1.,0.)); +#230350 = ORIENTED_EDGE('',*,*,#230351,.T.); +#230351 = EDGE_CURVE('',#230344,#230352,#230354,.T.); +#230352 = VERTEX_POINT('',#230353); +#230353 = CARTESIAN_POINT('',(104.578584,-56.731433,1.585)); +#230354 = CIRCLE('',#230355,0.239434552369); +#230355 = AXIS2_PLACEMENT_3D('',#230356,#230357,#230358); +#230356 = CARTESIAN_POINT('',(104.56257060777,-56.97033146407,1.585)); +#230357 = DIRECTION('',(0.,0.,1.)); +#230358 = DIRECTION('',(0.997760723601,6.688451569426E-02,-0.)); +#230359 = ORIENTED_EDGE('',*,*,#230360,.T.); +#230360 = EDGE_CURVE('',#230352,#230299,#230361,.T.); +#230361 = LINE('',#230362,#230363); +#230362 = CARTESIAN_POINT('',(104.578584,-56.731433,1.585)); +#230363 = VECTOR('',#230364,1.); +#230364 = DIRECTION('',(-0.999997979007,2.010468251347E-03,0.)); +#230365 = PLANE('',#230366); +#230366 = AXIS2_PLACEMENT_3D('',#230367,#230368,#230369); +#230367 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230368 = DIRECTION('',(0.,0.,1.)); +#230369 = DIRECTION('',(1.,0.,-0.)); +#230370 = SHELL_BASED_SURFACE_MODEL('',(#230371)); +#230371 = OPEN_SHELL('',(#230372)); +#230372 = ADVANCED_FACE('',(#230373),#230532,.T.); +#230373 = FACE_BOUND('',#230374,.F.); +#230374 = EDGE_LOOP('',(#230375,#230386,#230394,#230402,#230410,#230418, + #230426,#230434,#230443,#230451,#230460,#230468,#230476,#230484, + #230493,#230501,#230509,#230517,#230526)); +#230375 = ORIENTED_EDGE('',*,*,#230376,.T.); +#230376 = EDGE_CURVE('',#230377,#230379,#230381,.T.); +#230377 = VERTEX_POINT('',#230378); +#230378 = CARTESIAN_POINT('',(169.468823,-55.563456,1.585)); +#230379 = VERTEX_POINT('',#230380); +#230380 = CARTESIAN_POINT('',(169.978218,-55.572786,1.585)); +#230381 = CIRCLE('',#230382,0.450326844012); +#230382 = AXIS2_PLACEMENT_3D('',#230383,#230384,#230385); +#230383 = CARTESIAN_POINT('',(169.7167200301,-55.93940989199,1.585)); +#230384 = DIRECTION('',(0.,0.,-1.)); +#230385 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#230386 = ORIENTED_EDGE('',*,*,#230387,.T.); +#230387 = EDGE_CURVE('',#230379,#230388,#230390,.T.); +#230388 = VERTEX_POINT('',#230389); +#230389 = CARTESIAN_POINT('',(170.041671,-55.638316,1.585)); +#230390 = LINE('',#230391,#230392); +#230391 = CARTESIAN_POINT('',(169.978218,-55.572786,1.585)); +#230392 = VECTOR('',#230393,1.); +#230393 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#230394 = ORIENTED_EDGE('',*,*,#230395,.T.); +#230395 = EDGE_CURVE('',#230388,#230396,#230398,.T.); +#230396 = VERTEX_POINT('',#230397); +#230397 = CARTESIAN_POINT('',(170.099732,-55.758763,1.585)); +#230398 = LINE('',#230399,#230400); +#230399 = CARTESIAN_POINT('',(170.041671,-55.638316,1.585)); +#230400 = VECTOR('',#230401,1.); +#230401 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#230402 = ORIENTED_EDGE('',*,*,#230403,.T.); +#230403 = EDGE_CURVE('',#230396,#230404,#230406,.T.); +#230404 = VERTEX_POINT('',#230405); +#230405 = CARTESIAN_POINT('',(170.098973,-55.885095,1.585)); +#230406 = LINE('',#230407,#230408); +#230407 = CARTESIAN_POINT('',(170.099732,-55.758763,1.585)); +#230408 = VECTOR('',#230409,1.); +#230409 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#230410 = ORIENTED_EDGE('',*,*,#230411,.T.); +#230411 = EDGE_CURVE('',#230404,#230412,#230414,.T.); +#230412 = VERTEX_POINT('',#230413); +#230413 = CARTESIAN_POINT('',(170.040915,-56.053158,1.585)); +#230414 = LINE('',#230415,#230416); +#230415 = CARTESIAN_POINT('',(170.098973,-55.885095,1.585)); +#230416 = VECTOR('',#230417,1.); +#230417 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#230418 = ORIENTED_EDGE('',*,*,#230419,.T.); +#230419 = EDGE_CURVE('',#230412,#230420,#230422,.T.); +#230420 = VERTEX_POINT('',#230421); +#230421 = CARTESIAN_POINT('',(169.588192,-56.507919,1.585)); +#230422 = LINE('',#230423,#230424); +#230423 = CARTESIAN_POINT('',(170.040915,-56.053158,1.585)); +#230424 = VECTOR('',#230425,1.); +#230425 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#230426 = ORIENTED_EDGE('',*,*,#230427,.T.); +#230427 = EDGE_CURVE('',#230420,#230428,#230430,.T.); +#230428 = VERTEX_POINT('',#230429); +#230429 = CARTESIAN_POINT('',(170.040805,-56.50936,1.585)); +#230430 = LINE('',#230431,#230432); +#230431 = CARTESIAN_POINT('',(169.588192,-56.507919,1.585)); +#230432 = VECTOR('',#230433,1.); +#230433 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#230434 = ORIENTED_EDGE('',*,*,#230435,.T.); +#230435 = EDGE_CURVE('',#230428,#230436,#230438,.T.); +#230436 = VERTEX_POINT('',#230437); +#230437 = CARTESIAN_POINT('',(170.026173,-56.657919,1.585)); +#230438 = CIRCLE('',#230439,7.500006711464E-02); +#230439 = AXIS2_PLACEMENT_3D('',#230440,#230441,#230442); +#230440 = CARTESIAN_POINT('',(170.02617306711,-56.58291893288,1.585)); +#230441 = DIRECTION('',(0.,0.,-1.)); +#230442 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#230443 = ORIENTED_EDGE('',*,*,#230444,.T.); +#230444 = EDGE_CURVE('',#230436,#230445,#230447,.T.); +#230445 = VERTEX_POINT('',#230446); +#230446 = CARTESIAN_POINT('',(169.392494,-56.656478,1.585)); +#230447 = LINE('',#230448,#230449); +#230448 = CARTESIAN_POINT('',(170.026173,-56.657919,1.585)); +#230449 = VECTOR('',#230450,1.); +#230450 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#230451 = ORIENTED_EDGE('',*,*,#230452,.T.); +#230452 = EDGE_CURVE('',#230445,#230453,#230455,.T.); +#230453 = VERTEX_POINT('',#230454); +#230454 = CARTESIAN_POINT('',(169.354093,-56.529886,1.585)); +#230455 = CIRCLE('',#230456,7.500021013109E-02); +#230456 = AXIS2_PLACEMENT_3D('',#230457,#230458,#230459); +#230457 = CARTESIAN_POINT('',(169.4071263167,-56.58291899764,1.585)); +#230458 = DIRECTION('',(0.,0.,-1.)); +#230459 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#230460 = ORIENTED_EDGE('',*,*,#230461,.T.); +#230461 = EDGE_CURVE('',#230453,#230462,#230464,.T.); +#230462 = VERTEX_POINT('',#230463); +#230463 = CARTESIAN_POINT('',(169.913001,-55.970976,1.585)); +#230464 = LINE('',#230465,#230466); +#230465 = CARTESIAN_POINT('',(169.354093,-56.529886,1.585)); +#230466 = VECTOR('',#230467,1.); +#230467 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#230468 = ORIENTED_EDGE('',*,*,#230469,.T.); +#230469 = EDGE_CURVE('',#230462,#230470,#230472,.T.); +#230470 = VERTEX_POINT('',#230471); +#230471 = CARTESIAN_POINT('',(169.951173,-55.856463,1.585)); +#230472 = LINE('',#230473,#230474); +#230473 = CARTESIAN_POINT('',(169.913001,-55.970976,1.585)); +#230474 = VECTOR('',#230475,1.); +#230475 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#230476 = ORIENTED_EDGE('',*,*,#230477,.T.); +#230477 = EDGE_CURVE('',#230470,#230478,#230480,.T.); +#230478 = VERTEX_POINT('',#230479); +#230479 = CARTESIAN_POINT('',(169.951173,-55.7911,1.585)); +#230480 = LINE('',#230481,#230482); +#230481 = CARTESIAN_POINT('',(169.951173,-55.856463,1.585)); +#230482 = VECTOR('',#230483,1.); +#230483 = DIRECTION('',(0.,1.,0.)); +#230484 = ORIENTED_EDGE('',*,*,#230485,.T.); +#230485 = EDGE_CURVE('',#230478,#230486,#230488,.T.); +#230486 = VERTEX_POINT('',#230487); +#230487 = CARTESIAN_POINT('',(169.817992,-55.657919,1.585)); +#230488 = CIRCLE('',#230489,0.18686440374); +#230489 = AXIS2_PLACEMENT_3D('',#230490,#230491,#230492); +#230490 = CARTESIAN_POINT('',(169.770456,-55.838636,1.585)); +#230491 = DIRECTION('',(0.,0.,1.)); +#230492 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#230493 = ORIENTED_EDGE('',*,*,#230494,.T.); +#230494 = EDGE_CURVE('',#230486,#230495,#230497,.T.); +#230495 = VERTEX_POINT('',#230496); +#230496 = CARTESIAN_POINT('',(169.615307,-55.657919,1.585)); +#230497 = LINE('',#230498,#230499); +#230498 = CARTESIAN_POINT('',(169.817992,-55.657919,1.585)); +#230499 = VECTOR('',#230500,1.); +#230500 = DIRECTION('',(-1.,0.,0.)); +#230501 = ORIENTED_EDGE('',*,*,#230502,.T.); +#230502 = EDGE_CURVE('',#230495,#230503,#230505,.T.); +#230503 = VERTEX_POINT('',#230504); +#230504 = CARTESIAN_POINT('',(169.546791,-55.692177,1.585)); +#230505 = LINE('',#230506,#230507); +#230506 = CARTESIAN_POINT('',(169.615307,-55.657919,1.585)); +#230507 = VECTOR('',#230508,1.); +#230508 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#230509 = ORIENTED_EDGE('',*,*,#230510,.T.); +#230510 = EDGE_CURVE('',#230503,#230511,#230513,.T.); +#230511 = VERTEX_POINT('',#230512); +#230512 = CARTESIAN_POINT('',(169.496413,-55.740517,1.585)); +#230513 = LINE('',#230514,#230515); +#230514 = CARTESIAN_POINT('',(169.546791,-55.692177,1.585)); +#230515 = VECTOR('',#230516,1.); +#230516 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#230517 = ORIENTED_EDGE('',*,*,#230518,.T.); +#230518 = EDGE_CURVE('',#230511,#230519,#230521,.T.); +#230519 = VERTEX_POINT('',#230520); +#230520 = CARTESIAN_POINT('',(169.401712,-55.625124,1.585)); +#230521 = CIRCLE('',#230522,7.499996838527E-02); +#230522 = AXIS2_PLACEMENT_3D('',#230523,#230524,#230525); +#230523 = CARTESIAN_POINT('',(169.454745,-55.67815697246,1.585)); +#230524 = DIRECTION('',(0.,0.,-1.)); +#230525 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#230526 = ORIENTED_EDGE('',*,*,#230527,.T.); +#230527 = EDGE_CURVE('',#230519,#230377,#230528,.T.); +#230528 = LINE('',#230529,#230530); +#230529 = CARTESIAN_POINT('',(169.401712,-55.625124,1.585)); +#230530 = VECTOR('',#230531,1.); +#230531 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#230532 = PLANE('',#230533); +#230533 = AXIS2_PLACEMENT_3D('',#230534,#230535,#230536); +#230534 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230535 = DIRECTION('',(0.,0.,1.)); +#230536 = DIRECTION('',(1.,0.,-0.)); +#230537 = SHELL_BASED_SURFACE_MODEL('',(#230538)); +#230538 = OPEN_SHELL('',(#230539)); +#230539 = ADVANCED_FACE('',(#230540),#230660,.T.); +#230540 = FACE_BOUND('',#230541,.F.); +#230541 = EDGE_LOOP('',(#230542,#230553,#230561,#230570,#230578,#230587, + #230595,#230604,#230612,#230621,#230629,#230638,#230646,#230654)); +#230542 = ORIENTED_EDGE('',*,*,#230543,.T.); +#230543 = EDGE_CURVE('',#230544,#230546,#230548,.T.); +#230544 = VERTEX_POINT('',#230545); +#230545 = CARTESIAN_POINT('',(168.413077,-55.520559,1.585)); +#230546 = VERTEX_POINT('',#230547); +#230547 = CARTESIAN_POINT('',(168.529745,-55.582919,1.585)); +#230548 = CIRCLE('',#230549,7.500000000003E-02); +#230549 = AXIS2_PLACEMENT_3D('',#230550,#230551,#230552); +#230550 = CARTESIAN_POINT('',(168.454745,-55.58291906555,1.585)); +#230551 = DIRECTION('',(0.,0.,-1.)); +#230552 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#230553 = ORIENTED_EDGE('',*,*,#230554,.T.); +#230554 = EDGE_CURVE('',#230546,#230555,#230557,.T.); +#230555 = VERTEX_POINT('',#230556); +#230556 = CARTESIAN_POINT('',(168.529745,-56.374737,1.585)); +#230557 = LINE('',#230558,#230559); +#230558 = CARTESIAN_POINT('',(168.529745,-55.582919,1.585)); +#230559 = VECTOR('',#230560,1.); +#230560 = DIRECTION('',(0.,-1.,0.)); +#230561 = ORIENTED_EDGE('',*,*,#230562,.T.); +#230562 = EDGE_CURVE('',#230555,#230563,#230565,.T.); +#230563 = VERTEX_POINT('',#230564); +#230564 = CARTESIAN_POINT('',(168.662926,-56.507919,1.585)); +#230565 = CIRCLE('',#230566,0.186867373533); +#230566 = AXIS2_PLACEMENT_3D('',#230567,#230568,#230569); +#230567 = CARTESIAN_POINT('',(168.71046471388,-56.32719964305,1.585)); +#230568 = DIRECTION('',(0.,0.,1.)); +#230569 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#230570 = ORIENTED_EDGE('',*,*,#230571,.T.); +#230571 = EDGE_CURVE('',#230563,#230572,#230574,.T.); +#230572 = VERTEX_POINT('',#230573); +#230573 = CARTESIAN_POINT('',(168.817992,-56.507919,1.585)); +#230574 = LINE('',#230575,#230576); +#230575 = CARTESIAN_POINT('',(168.662926,-56.507919,1.585)); +#230576 = VECTOR('',#230577,1.); +#230577 = DIRECTION('',(1.,0.,0.)); +#230578 = ORIENTED_EDGE('',*,*,#230579,.T.); +#230579 = EDGE_CURVE('',#230572,#230580,#230582,.T.); +#230580 = VERTEX_POINT('',#230581); +#230581 = CARTESIAN_POINT('',(168.951173,-56.374737,1.585)); +#230582 = CIRCLE('',#230583,0.186867760544); +#230583 = AXIS2_PLACEMENT_3D('',#230584,#230585,#230586); +#230584 = CARTESIAN_POINT('',(168.77045296928,-56.32719932622,1.585)); +#230585 = DIRECTION('',(0.,0.,1.)); +#230586 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#230587 = ORIENTED_EDGE('',*,*,#230588,.T.); +#230588 = EDGE_CURVE('',#230580,#230589,#230591,.T.); +#230589 = VERTEX_POINT('',#230590); +#230590 = CARTESIAN_POINT('',(168.952614,-55.568287,1.585)); +#230591 = LINE('',#230592,#230593); +#230592 = CARTESIAN_POINT('',(168.951173,-56.374737,1.585)); +#230593 = VECTOR('',#230594,1.); +#230594 = DIRECTION('',(1.786840721168E-03,0.999998403599,0.)); +#230595 = ORIENTED_EDGE('',*,*,#230596,.T.); +#230596 = EDGE_CURVE('',#230589,#230597,#230599,.T.); +#230597 = VERTEX_POINT('',#230598); +#230598 = CARTESIAN_POINT('',(169.101173,-55.582919,1.585)); +#230599 = CIRCLE('',#230600,7.500006711463E-02); +#230600 = AXIS2_PLACEMENT_3D('',#230601,#230602,#230603); +#230601 = CARTESIAN_POINT('',(169.02617293288,-55.58291893288,1.585)); +#230602 = DIRECTION('',(0.,0.,-1.)); +#230603 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#230604 = ORIENTED_EDGE('',*,*,#230605,.T.); +#230605 = EDGE_CURVE('',#230597,#230606,#230608,.T.); +#230606 = VERTEX_POINT('',#230607); +#230607 = CARTESIAN_POINT('',(169.09851,-56.412252,1.585)); +#230608 = LINE('',#230609,#230610); +#230609 = CARTESIAN_POINT('',(169.101173,-55.582919,1.585)); +#230610 = VECTOR('',#230611,1.); +#230611 = DIRECTION('',(-3.210997598685E-03,-0.999994844734,0.)); +#230612 = ORIENTED_EDGE('',*,*,#230613,.T.); +#230613 = EDGE_CURVE('',#230606,#230614,#230616,.T.); +#230614 = VERTEX_POINT('',#230615); +#230615 = CARTESIAN_POINT('',(168.850329,-56.656478,1.585)); +#230616 = CIRCLE('',#230617,0.348635327447); +#230617 = AXIS2_PLACEMENT_3D('',#230618,#230619,#230620); +#230618 = CARTESIAN_POINT('',(168.76255748129,-56.31907208415,1.585)); +#230619 = DIRECTION('',(0.,0.,-1.)); +#230620 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#230621 = ORIENTED_EDGE('',*,*,#230622,.T.); +#230622 = EDGE_CURVE('',#230614,#230623,#230625,.T.); +#230623 = VERTEX_POINT('',#230624); +#230624 = CARTESIAN_POINT('',(168.625411,-56.655256,1.585)); +#230625 = LINE('',#230626,#230627); +#230626 = CARTESIAN_POINT('',(168.850329,-56.656478,1.585)); +#230627 = VECTOR('',#230628,1.); +#230628 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#230629 = ORIENTED_EDGE('',*,*,#230630,.T.); +#230630 = EDGE_CURVE('',#230623,#230631,#230633,.T.); +#230631 = VERTEX_POINT('',#230632); +#230632 = CARTESIAN_POINT('',(168.381186,-56.407074,1.585)); +#230633 = CIRCLE('',#230634,0.348628446662); +#230634 = AXIS2_PLACEMENT_3D('',#230635,#230636,#230637); +#230635 = CARTESIAN_POINT('',(168.71858661322,-56.31930942847,1.585)); +#230636 = DIRECTION('',(0.,0.,-1.)); +#230637 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#230638 = ORIENTED_EDGE('',*,*,#230639,.T.); +#230639 = EDGE_CURVE('',#230631,#230640,#230642,.T.); +#230640 = VERTEX_POINT('',#230641); +#230641 = CARTESIAN_POINT('',(168.381186,-55.568287,1.585)); +#230642 = LINE('',#230643,#230644); +#230643 = CARTESIAN_POINT('',(168.381186,-56.407074,1.585)); +#230644 = VECTOR('',#230645,1.); +#230645 = DIRECTION('',(0.,1.,0.)); +#230646 = ORIENTED_EDGE('',*,*,#230647,.T.); +#230647 = EDGE_CURVE('',#230640,#230648,#230650,.T.); +#230648 = VERTEX_POINT('',#230649); +#230649 = CARTESIAN_POINT('',(168.392385,-55.541251,1.585)); +#230650 = LINE('',#230651,#230652); +#230651 = CARTESIAN_POINT('',(168.381186,-55.568287,1.585)); +#230652 = VECTOR('',#230653,1.); +#230653 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#230654 = ORIENTED_EDGE('',*,*,#230655,.T.); +#230655 = EDGE_CURVE('',#230648,#230544,#230656,.T.); +#230656 = LINE('',#230657,#230658); +#230657 = CARTESIAN_POINT('',(168.392385,-55.541251,1.585)); +#230658 = VECTOR('',#230659,1.); +#230659 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#230660 = PLANE('',#230661); +#230661 = AXIS2_PLACEMENT_3D('',#230662,#230663,#230664); +#230662 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230663 = DIRECTION('',(0.,0.,1.)); +#230664 = DIRECTION('',(1.,0.,-0.)); +#230665 = SHELL_BASED_SURFACE_MODEL('',(#230666)); +#230666 = OPEN_SHELL('',(#230667)); +#230667 = ADVANCED_FACE('',(#230668),#230729,.T.); +#230668 = FACE_BOUND('',#230669,.F.); +#230669 = EDGE_LOOP('',(#230670,#230681,#230689,#230698,#230706,#230714, + #230723)); +#230670 = ORIENTED_EDGE('',*,*,#230671,.T.); +#230671 = EDGE_CURVE('',#230672,#230674,#230676,.T.); +#230672 = VERTEX_POINT('',#230673); +#230673 = CARTESIAN_POINT('',(187.62415,-54.3656,1.585)); +#230674 = VERTEX_POINT('',#230675); +#230675 = CARTESIAN_POINT('',(187.68415,-54.3056,1.585)); +#230676 = CIRCLE('',#230677,5.999932016262E-02); +#230677 = AXIS2_PLACEMENT_3D('',#230678,#230679,#230680); +#230678 = CARTESIAN_POINT('',(187.68414932015,-54.36559932015,1.585)); +#230679 = DIRECTION('',(0.,0.,-1.)); +#230680 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#230681 = ORIENTED_EDGE('',*,*,#230682,.T.); +#230682 = EDGE_CURVE('',#230674,#230683,#230685,.T.); +#230683 = VERTEX_POINT('',#230684); +#230684 = CARTESIAN_POINT('',(189.88415,-54.3056,1.585)); +#230685 = LINE('',#230686,#230687); +#230686 = CARTESIAN_POINT('',(187.68415,-54.3056,1.585)); +#230687 = VECTOR('',#230688,1.); +#230688 = DIRECTION('',(1.,0.,0.)); +#230689 = ORIENTED_EDGE('',*,*,#230690,.T.); +#230690 = EDGE_CURVE('',#230683,#230691,#230693,.T.); +#230691 = VERTEX_POINT('',#230692); +#230692 = CARTESIAN_POINT('',(189.88415,-54.4256,1.585)); +#230693 = CIRCLE('',#230694,6.000000000043E-02); +#230694 = AXIS2_PLACEMENT_3D('',#230695,#230696,#230697); +#230695 = CARTESIAN_POINT('',(189.88415022558,-54.3656,1.585)); +#230696 = DIRECTION('',(0.,0.,-1.)); +#230697 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#230698 = ORIENTED_EDGE('',*,*,#230699,.T.); +#230699 = EDGE_CURVE('',#230691,#230700,#230702,.T.); +#230700 = VERTEX_POINT('',#230701); +#230701 = CARTESIAN_POINT('',(187.74415,-54.4256,1.585)); +#230702 = LINE('',#230703,#230704); +#230703 = CARTESIAN_POINT('',(189.88415,-54.4256,1.585)); +#230704 = VECTOR('',#230705,1.); +#230705 = DIRECTION('',(-1.,0.,0.)); +#230706 = ORIENTED_EDGE('',*,*,#230707,.T.); +#230707 = EDGE_CURVE('',#230700,#230708,#230710,.T.); +#230708 = VERTEX_POINT('',#230709); +#230709 = CARTESIAN_POINT('',(187.74415,-56.4656,1.585)); +#230710 = LINE('',#230711,#230712); +#230711 = CARTESIAN_POINT('',(187.74415,-54.4256,1.585)); +#230712 = VECTOR('',#230713,1.); +#230713 = DIRECTION('',(0.,-1.,0.)); +#230714 = ORIENTED_EDGE('',*,*,#230715,.T.); +#230715 = EDGE_CURVE('',#230708,#230716,#230718,.T.); +#230716 = VERTEX_POINT('',#230717); +#230717 = CARTESIAN_POINT('',(187.62415,-56.4656,1.585)); +#230718 = CIRCLE('',#230719,6.000000000042E-02); +#230719 = AXIS2_PLACEMENT_3D('',#230720,#230721,#230722); +#230720 = CARTESIAN_POINT('',(187.68415,-56.46560022558,1.585)); +#230721 = DIRECTION('',(0.,0.,-1.)); +#230722 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#230723 = ORIENTED_EDGE('',*,*,#230724,.T.); +#230724 = EDGE_CURVE('',#230716,#230672,#230725,.T.); +#230725 = LINE('',#230726,#230727); +#230726 = CARTESIAN_POINT('',(187.62415,-56.4656,1.585)); +#230727 = VECTOR('',#230728,1.); +#230728 = DIRECTION('',(0.,1.,0.)); +#230729 = PLANE('',#230730); +#230730 = AXIS2_PLACEMENT_3D('',#230731,#230732,#230733); +#230731 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230732 = DIRECTION('',(0.,0.,1.)); +#230733 = DIRECTION('',(1.,0.,-0.)); +#230734 = SHELL_BASED_SURFACE_MODEL('',(#230735)); +#230735 = OPEN_SHELL('',(#230736)); +#230736 = ADVANCED_FACE('',(#230737),#230911,.T.); +#230737 = FACE_BOUND('',#230738,.F.); +#230738 = EDGE_LOOP('',(#230739,#230750,#230758,#230766,#230774,#230782, + #230790,#230799,#230807,#230815,#230824,#230832,#230840,#230849, + #230857,#230865,#230873,#230881,#230889,#230897,#230905)); +#230739 = ORIENTED_EDGE('',*,*,#230740,.T.); +#230740 = EDGE_CURVE('',#230741,#230743,#230745,.T.); +#230741 = VERTEX_POINT('',#230742); +#230742 = CARTESIAN_POINT('',(159.119101,-55.99284,1.585)); +#230743 = VERTEX_POINT('',#230744); +#230744 = CARTESIAN_POINT('',(159.235769,-56.0552,1.585)); +#230745 = CIRCLE('',#230746,7.500000000003E-02); +#230746 = AXIS2_PLACEMENT_3D('',#230747,#230748,#230749); +#230747 = CARTESIAN_POINT('',(159.160769,-56.05520006555,1.585)); +#230748 = DIRECTION('',(0.,0.,-1.)); +#230749 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#230750 = ORIENTED_EDGE('',*,*,#230751,.T.); +#230751 = EDGE_CURVE('',#230743,#230752,#230754,.T.); +#230752 = VERTEX_POINT('',#230753); +#230753 = CARTESIAN_POINT('',(159.235769,-56.132733,1.585)); +#230754 = LINE('',#230755,#230756); +#230755 = CARTESIAN_POINT('',(159.235769,-56.0552,1.585)); +#230756 = VECTOR('',#230757,1.); +#230757 = DIRECTION('',(0.,-1.,0.)); +#230758 = ORIENTED_EDGE('',*,*,#230759,.T.); +#230759 = EDGE_CURVE('',#230752,#230760,#230762,.T.); +#230760 = VERTEX_POINT('',#230761); +#230761 = CARTESIAN_POINT('',(159.264289,-56.189774,1.585)); +#230762 = LINE('',#230763,#230764); +#230763 = CARTESIAN_POINT('',(159.235769,-56.132733,1.585)); +#230764 = VECTOR('',#230765,1.); +#230765 = DIRECTION('',(0.447207323296,-0.894430327074,0.)); +#230766 = ORIENTED_EDGE('',*,*,#230767,.T.); +#230767 = EDGE_CURVE('',#230760,#230768,#230770,.T.); +#230768 = VERTEX_POINT('',#230769); +#230769 = CARTESIAN_POINT('',(159.321331,-56.218295,1.585)); +#230770 = LINE('',#230771,#230772); +#230771 = CARTESIAN_POINT('',(159.264289,-56.189774,1.585)); +#230772 = VECTOR('',#230773,1.); +#230773 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#230774 = ORIENTED_EDGE('',*,*,#230775,.T.); +#230775 = EDGE_CURVE('',#230768,#230776,#230778,.T.); +#230776 = VERTEX_POINT('',#230777); +#230777 = CARTESIAN_POINT('',(159.419102,-56.218295,1.585)); +#230778 = LINE('',#230779,#230780); +#230779 = CARTESIAN_POINT('',(159.321331,-56.218295,1.585)); +#230780 = VECTOR('',#230781,1.); +#230781 = DIRECTION('',(1.,0.,0.)); +#230782 = ORIENTED_EDGE('',*,*,#230783,.T.); +#230783 = EDGE_CURVE('',#230776,#230784,#230786,.T.); +#230784 = VERTEX_POINT('',#230785); +#230785 = CARTESIAN_POINT('',(159.420543,-56.040568,1.585)); +#230786 = LINE('',#230787,#230788); +#230787 = CARTESIAN_POINT('',(159.419102,-56.218295,1.585)); +#230788 = VECTOR('',#230789,1.); +#230789 = DIRECTION('',(8.107674340974E-03,0.999967132268,0.)); +#230790 = ORIENTED_EDGE('',*,*,#230791,.T.); +#230791 = EDGE_CURVE('',#230784,#230792,#230794,.T.); +#230792 = VERTEX_POINT('',#230793); +#230793 = CARTESIAN_POINT('',(159.569102,-56.0552,1.585)); +#230794 = CIRCLE('',#230795,7.500006711463E-02); +#230795 = AXIS2_PLACEMENT_3D('',#230796,#230797,#230798); +#230796 = CARTESIAN_POINT('',(159.49410193288,-56.05519993288,1.585)); +#230797 = DIRECTION('',(0.,0.,-1.)); +#230798 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#230799 = ORIENTED_EDGE('',*,*,#230800,.T.); +#230800 = EDGE_CURVE('',#230792,#230801,#230803,.T.); +#230801 = VERTEX_POINT('',#230802); +#230802 = CARTESIAN_POINT('',(159.569102,-56.218295,1.585)); +#230803 = LINE('',#230804,#230805); +#230804 = CARTESIAN_POINT('',(159.569102,-56.0552,1.585)); +#230805 = VECTOR('',#230806,1.); +#230806 = DIRECTION('',(0.,-1.,0.)); +#230807 = ORIENTED_EDGE('',*,*,#230808,.T.); +#230808 = EDGE_CURVE('',#230801,#230809,#230811,.T.); +#230809 = VERTEX_POINT('',#230810); +#230810 = CARTESIAN_POINT('',(160.175401,-56.219736,1.585)); +#230811 = LINE('',#230812,#230813); +#230812 = CARTESIAN_POINT('',(159.569102,-56.218295,1.585)); +#230813 = VECTOR('',#230814,1.); +#230814 = DIRECTION('',(0.999997175625,-2.376708406372E-03,0.)); +#230815 = ORIENTED_EDGE('',*,*,#230816,.T.); +#230816 = EDGE_CURVE('',#230809,#230817,#230819,.T.); +#230817 = VERTEX_POINT('',#230818); +#230818 = CARTESIAN_POINT('',(160.160769,-56.368295,1.585)); +#230819 = CIRCLE('',#230820,7.500006711465E-02); +#230820 = AXIS2_PLACEMENT_3D('',#230821,#230822,#230823); +#230821 = CARTESIAN_POINT('',(160.16076906711,-56.29329493288,1.585)); +#230822 = DIRECTION('',(0.,0.,-1.)); +#230823 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#230824 = ORIENTED_EDGE('',*,*,#230825,.T.); +#230825 = EDGE_CURVE('',#230817,#230826,#230828,.T.); +#230826 = VERTEX_POINT('',#230827); +#230827 = CARTESIAN_POINT('',(159.569102,-56.368295,1.585)); +#230828 = LINE('',#230829,#230830); +#230829 = CARTESIAN_POINT('',(160.160769,-56.368295,1.585)); +#230830 = VECTOR('',#230831,1.); +#230831 = DIRECTION('',(-1.,0.,0.)); +#230832 = ORIENTED_EDGE('',*,*,#230833,.T.); +#230833 = EDGE_CURVE('',#230826,#230834,#230836,.T.); +#230834 = VERTEX_POINT('',#230835); +#230835 = CARTESIAN_POINT('',(159.567661,-56.450784,1.585)); +#230836 = LINE('',#230837,#230838); +#230837 = CARTESIAN_POINT('',(159.569102,-56.368295,1.585)); +#230838 = VECTOR('',#230839,1.); +#230839 = DIRECTION('',(-1.746633100582E-02,-0.999847452005,0.)); +#230840 = ORIENTED_EDGE('',*,*,#230841,.T.); +#230841 = EDGE_CURVE('',#230834,#230842,#230844,.T.); +#230842 = VERTEX_POINT('',#230843); +#230843 = CARTESIAN_POINT('',(159.419102,-56.436152,1.585)); +#230844 = CIRCLE('',#230845,7.500006711463E-02); +#230845 = AXIS2_PLACEMENT_3D('',#230846,#230847,#230848); +#230846 = CARTESIAN_POINT('',(159.49410206711,-56.43615206711,1.585)); +#230847 = DIRECTION('',(-0.,0.,-1.)); +#230848 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#230849 = ORIENTED_EDGE('',*,*,#230850,.T.); +#230850 = EDGE_CURVE('',#230842,#230851,#230853,.T.); +#230851 = VERTEX_POINT('',#230852); +#230852 = CARTESIAN_POINT('',(159.419102,-56.368295,1.585)); +#230853 = LINE('',#230854,#230855); +#230854 = CARTESIAN_POINT('',(159.419102,-56.436152,1.585)); +#230855 = VECTOR('',#230856,1.); +#230856 = DIRECTION('',(0.,1.,0.)); +#230857 = ORIENTED_EDGE('',*,*,#230858,.T.); +#230858 = EDGE_CURVE('',#230851,#230859,#230861,.T.); +#230859 = VERTEX_POINT('',#230860); +#230860 = CARTESIAN_POINT('',(159.283816,-56.365632,1.585)); +#230861 = LINE('',#230862,#230863); +#230862 = CARTESIAN_POINT('',(159.419102,-56.368295,1.585)); +#230863 = VECTOR('',#230864,1.); +#230864 = DIRECTION('',(-0.999806321934,1.968041212923E-02,0.)); +#230865 = ORIENTED_EDGE('',*,*,#230866,.T.); +#230866 = EDGE_CURVE('',#230859,#230867,#230869,.T.); +#230867 = VERTEX_POINT('',#230868); +#230868 = CARTESIAN_POINT('',(159.162404,-56.304926,1.585)); +#230869 = LINE('',#230870,#230871); +#230870 = CARTESIAN_POINT('',(159.283816,-56.365632,1.585)); +#230871 = VECTOR('',#230872,1.); +#230872 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#230873 = ORIENTED_EDGE('',*,*,#230874,.T.); +#230874 = EDGE_CURVE('',#230867,#230875,#230877,.T.); +#230875 = VERTEX_POINT('',#230876); +#230876 = CARTESIAN_POINT('',(159.141306,-56.279217,1.585)); +#230877 = LINE('',#230878,#230879); +#230878 = CARTESIAN_POINT('',(159.162404,-56.304926,1.585)); +#230879 = VECTOR('',#230880,1.); +#230880 = DIRECTION('',(-0.634378352792,0.773022706982,0.)); +#230881 = ORIENTED_EDGE('',*,*,#230882,.T.); +#230882 = EDGE_CURVE('',#230875,#230883,#230885,.T.); +#230883 = VERTEX_POINT('',#230884); +#230884 = CARTESIAN_POINT('',(159.08721,-56.16507,1.585)); +#230885 = LINE('',#230886,#230887); +#230886 = CARTESIAN_POINT('',(159.141306,-56.279217,1.585)); +#230887 = VECTOR('',#230888,1.); +#230888 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#230889 = ORIENTED_EDGE('',*,*,#230890,.T.); +#230890 = EDGE_CURVE('',#230883,#230891,#230893,.T.); +#230891 = VERTEX_POINT('',#230892); +#230892 = CARTESIAN_POINT('',(159.08721,-56.040568,1.585)); +#230893 = LINE('',#230894,#230895); +#230894 = CARTESIAN_POINT('',(159.08721,-56.16507,1.585)); +#230895 = VECTOR('',#230896,1.); +#230896 = DIRECTION('',(0.,1.,0.)); +#230897 = ORIENTED_EDGE('',*,*,#230898,.T.); +#230898 = EDGE_CURVE('',#230891,#230899,#230901,.T.); +#230899 = VERTEX_POINT('',#230900); +#230900 = CARTESIAN_POINT('',(159.098409,-56.013532,1.585)); +#230901 = LINE('',#230902,#230903); +#230902 = CARTESIAN_POINT('',(159.08721,-56.040568,1.585)); +#230903 = VECTOR('',#230904,1.); +#230904 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230905 = ORIENTED_EDGE('',*,*,#230906,.T.); +#230906 = EDGE_CURVE('',#230899,#230741,#230907,.T.); +#230907 = LINE('',#230908,#230909); +#230908 = CARTESIAN_POINT('',(159.098409,-56.013532,1.585)); +#230909 = VECTOR('',#230910,1.); +#230910 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#230911 = PLANE('',#230912); +#230912 = AXIS2_PLACEMENT_3D('',#230913,#230914,#230915); +#230913 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230914 = DIRECTION('',(0.,0.,1.)); +#230915 = DIRECTION('',(1.,0.,-0.)); +#230916 = SHELL_BASED_SURFACE_MODEL('',(#230917)); +#230917 = OPEN_SHELL('',(#230918)); +#230918 = ADVANCED_FACE('',(#230919),#230980,.T.); +#230919 = FACE_BOUND('',#230920,.F.); +#230920 = EDGE_LOOP('',(#230921,#230932,#230940,#230949,#230957,#230965, + #230974)); +#230921 = ORIENTED_EDGE('',*,*,#230922,.T.); +#230922 = EDGE_CURVE('',#230923,#230925,#230927,.T.); +#230923 = VERTEX_POINT('',#230924); +#230924 = CARTESIAN_POINT('',(105.80165,-54.9931,1.585)); +#230925 = VERTEX_POINT('',#230926); +#230926 = CARTESIAN_POINT('',(105.86165,-54.9331,1.585)); +#230927 = CIRCLE('',#230928,5.999932016262E-02); +#230928 = AXIS2_PLACEMENT_3D('',#230929,#230930,#230931); +#230929 = CARTESIAN_POINT('',(105.86164932015,-54.99309932015,1.585)); +#230930 = DIRECTION('',(0.,0.,-1.)); +#230931 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#230932 = ORIENTED_EDGE('',*,*,#230933,.T.); +#230933 = EDGE_CURVE('',#230925,#230934,#230936,.T.); +#230934 = VERTEX_POINT('',#230935); +#230935 = CARTESIAN_POINT('',(107.19165,-54.9331,1.585)); +#230936 = LINE('',#230937,#230938); +#230937 = CARTESIAN_POINT('',(105.86165,-54.9331,1.585)); +#230938 = VECTOR('',#230939,1.); +#230939 = DIRECTION('',(1.,0.,0.)); +#230940 = ORIENTED_EDGE('',*,*,#230941,.T.); +#230941 = EDGE_CURVE('',#230934,#230942,#230944,.T.); +#230942 = VERTEX_POINT('',#230943); +#230943 = CARTESIAN_POINT('',(107.19165,-55.0531,1.585)); +#230944 = CIRCLE('',#230945,6.000000000042E-02); +#230945 = AXIS2_PLACEMENT_3D('',#230946,#230947,#230948); +#230946 = CARTESIAN_POINT('',(107.19165022558,-54.9931,1.585)); +#230947 = DIRECTION('',(0.,0.,-1.)); +#230948 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#230949 = ORIENTED_EDGE('',*,*,#230950,.T.); +#230950 = EDGE_CURVE('',#230942,#230951,#230953,.T.); +#230951 = VERTEX_POINT('',#230952); +#230952 = CARTESIAN_POINT('',(105.92165,-55.0531,1.585)); +#230953 = LINE('',#230954,#230955); +#230954 = CARTESIAN_POINT('',(107.19165,-55.0531,1.585)); +#230955 = VECTOR('',#230956,1.); +#230956 = DIRECTION('',(-1.,0.,0.)); +#230957 = ORIENTED_EDGE('',*,*,#230958,.T.); +#230958 = EDGE_CURVE('',#230951,#230959,#230961,.T.); +#230959 = VERTEX_POINT('',#230960); +#230960 = CARTESIAN_POINT('',(105.92165,-56.3231,1.585)); +#230961 = LINE('',#230962,#230963); +#230962 = CARTESIAN_POINT('',(105.92165,-55.0531,1.585)); +#230963 = VECTOR('',#230964,1.); +#230964 = DIRECTION('',(0.,-1.,0.)); +#230965 = ORIENTED_EDGE('',*,*,#230966,.T.); +#230966 = EDGE_CURVE('',#230959,#230967,#230969,.T.); +#230967 = VERTEX_POINT('',#230968); +#230968 = CARTESIAN_POINT('',(105.80165,-56.3231,1.585)); +#230969 = CIRCLE('',#230970,6.000000000043E-02); +#230970 = AXIS2_PLACEMENT_3D('',#230971,#230972,#230973); +#230971 = CARTESIAN_POINT('',(105.86165,-56.32310022558,1.585)); +#230972 = DIRECTION('',(0.,0.,-1.)); +#230973 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#230974 = ORIENTED_EDGE('',*,*,#230975,.T.); +#230975 = EDGE_CURVE('',#230967,#230923,#230976,.T.); +#230976 = LINE('',#230977,#230978); +#230977 = CARTESIAN_POINT('',(105.80165,-56.3231,1.585)); +#230978 = VECTOR('',#230979,1.); +#230979 = DIRECTION('',(0.,1.,0.)); +#230980 = PLANE('',#230981); +#230981 = AXIS2_PLACEMENT_3D('',#230982,#230983,#230984); +#230982 = CARTESIAN_POINT('',(0.,0.,1.585)); +#230983 = DIRECTION('',(0.,0.,1.)); +#230984 = DIRECTION('',(1.,0.,-0.)); +#230985 = SHELL_BASED_SURFACE_MODEL('',(#230986)); +#230986 = OPEN_SHELL('',(#230987)); +#230987 = ADVANCED_FACE('',(#230988),#231122,.T.); +#230988 = FACE_BOUND('',#230989,.F.); +#230989 = EDGE_LOOP('',(#230990,#231001,#231009,#231018,#231026,#231034, + #231042,#231050,#231059,#231067,#231075,#231083,#231092,#231100, + #231108,#231116)); +#230990 = ORIENTED_EDGE('',*,*,#230991,.T.); +#230991 = EDGE_CURVE('',#230992,#230994,#230996,.T.); +#230992 = VERTEX_POINT('',#230993); +#230993 = CARTESIAN_POINT('',(104.834801,-55.594073,1.585)); +#230994 = VERTEX_POINT('',#230995); +#230995 = CARTESIAN_POINT('',(104.951469,-55.656433,1.585)); +#230996 = CIRCLE('',#230997,7.500000000003E-02); +#230997 = AXIS2_PLACEMENT_3D('',#230998,#230999,#231000); +#230998 = CARTESIAN_POINT('',(104.876469,-55.65643306555,1.585)); +#230999 = DIRECTION('',(0.,0.,-1.)); +#231000 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#231001 = ORIENTED_EDGE('',*,*,#231002,.T.); +#231002 = EDGE_CURVE('',#230994,#231003,#231005,.T.); +#231003 = VERTEX_POINT('',#231004); +#231004 = CARTESIAN_POINT('',(104.950028,-56.242493,1.585)); +#231005 = LINE('',#231006,#231007); +#231006 = CARTESIAN_POINT('',(104.951469,-55.656433,1.585)); +#231007 = VECTOR('',#231008,1.); +#231008 = DIRECTION('',(-2.45878518261E-03,-0.999996977183,0.)); +#231009 = ORIENTED_EDGE('',*,*,#231010,.T.); +#231010 = EDGE_CURVE('',#231003,#231011,#231013,.T.); +#231011 = VERTEX_POINT('',#231012); +#231012 = CARTESIAN_POINT('',(104.801469,-56.227861,1.585)); +#231013 = CIRCLE('',#231014,7.500006711465E-02); +#231014 = AXIS2_PLACEMENT_3D('',#231015,#231016,#231017); +#231015 = CARTESIAN_POINT('',(104.87646906711,-56.22786106711,1.585)); +#231016 = DIRECTION('',(-0.,0.,-1.)); +#231017 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#231018 = ORIENTED_EDGE('',*,*,#231019,.T.); +#231019 = EDGE_CURVE('',#231011,#231020,#231022,.T.); +#231020 = VERTEX_POINT('',#231021); +#231021 = CARTESIAN_POINT('',(104.801469,-56.017147,1.585)); +#231022 = LINE('',#231023,#231024); +#231023 = CARTESIAN_POINT('',(104.801469,-56.227861,1.585)); +#231024 = VECTOR('',#231025,1.); +#231025 = DIRECTION('',(0.,1.,0.)); +#231026 = ORIENTED_EDGE('',*,*,#231027,.T.); +#231027 = EDGE_CURVE('',#231020,#231028,#231030,.T.); +#231028 = VERTEX_POINT('',#231029); +#231029 = CARTESIAN_POINT('',(104.105154,-56.017147,1.585)); +#231030 = LINE('',#231031,#231032); +#231031 = CARTESIAN_POINT('',(104.801469,-56.017147,1.585)); +#231032 = VECTOR('',#231033,1.); +#231033 = DIRECTION('',(-1.,0.,0.)); +#231034 = ORIENTED_EDGE('',*,*,#231035,.T.); +#231035 = EDGE_CURVE('',#231028,#231036,#231038,.T.); +#231036 = VERTEX_POINT('',#231037); +#231037 = CARTESIAN_POINT('',(104.177683,-56.092787,1.585)); +#231038 = LINE('',#231039,#231040); +#231039 = CARTESIAN_POINT('',(104.105154,-56.017147,1.585)); +#231040 = VECTOR('',#231041,1.); +#231041 = DIRECTION('',(0.692107619701,-0.72179432164,0.)); +#231042 = ORIENTED_EDGE('',*,*,#231043,.T.); +#231043 = EDGE_CURVE('',#231036,#231044,#231046,.T.); +#231044 = VERTEX_POINT('',#231045); +#231045 = CARTESIAN_POINT('',(104.23452,-56.208051,1.585)); +#231046 = LINE('',#231047,#231048); +#231047 = CARTESIAN_POINT('',(104.177683,-56.092787,1.585)); +#231048 = VECTOR('',#231049,1.); +#231049 = DIRECTION('',(0.442257930733,-0.896887909777,0.)); +#231050 = ORIENTED_EDGE('',*,*,#231051,.T.); +#231051 = EDGE_CURVE('',#231044,#231052,#231054,.T.); +#231052 = VERTEX_POINT('',#231053); +#231053 = CARTESIAN_POINT('',(104.095101,-56.261402,1.585)); +#231054 = CIRCLE('',#231055,7.500029440469E-02); +#231055 = AXIS2_PLACEMENT_3D('',#231056,#231057,#231058); +#231056 = CARTESIAN_POINT('',(104.16218305397,-56.22786035132,1.585)); +#231057 = DIRECTION('',(0.,0.,-1.)); +#231058 = DIRECTION('',(0.964488827732,0.264123647522,0.)); +#231059 = ORIENTED_EDGE('',*,*,#231060,.T.); +#231060 = EDGE_CURVE('',#231052,#231061,#231063,.T.); +#231061 = VERTEX_POINT('',#231062); +#231062 = CARTESIAN_POINT('',(104.052925,-56.17705,1.585)); +#231063 = LINE('',#231064,#231065); +#231064 = CARTESIAN_POINT('',(104.095101,-56.261402,1.585)); +#231065 = VECTOR('',#231066,1.); +#231066 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#231067 = ORIENTED_EDGE('',*,*,#231068,.T.); +#231068 = EDGE_CURVE('',#231061,#231069,#231071,.T.); +#231069 = VERTEX_POINT('',#231070); +#231070 = CARTESIAN_POINT('',(103.971544,-56.095669,1.585)); +#231071 = LINE('',#231072,#231073); +#231072 = CARTESIAN_POINT('',(104.052925,-56.17705,1.585)); +#231073 = VECTOR('',#231074,1.); +#231074 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#231075 = ORIENTED_EDGE('',*,*,#231076,.T.); +#231076 = EDGE_CURVE('',#231069,#231077,#231079,.T.); +#231077 = VERTEX_POINT('',#231078); +#231078 = CARTESIAN_POINT('',(103.823491,-55.995235,1.585)); +#231079 = LINE('',#231080,#231081); +#231080 = CARTESIAN_POINT('',(103.971544,-56.095669,1.585)); +#231081 = VECTOR('',#231082,1.); +#231082 = DIRECTION('',(-0.827555069925,0.561384544,0.)); +#231083 = ORIENTED_EDGE('',*,*,#231084,.T.); +#231084 = EDGE_CURVE('',#231077,#231085,#231087,.T.); +#231085 = VERTEX_POINT('',#231086); +#231086 = CARTESIAN_POINT('',(103.876469,-55.867147,1.585)); +#231087 = CIRCLE('',#231088,7.499993751708E-02); +#231088 = AXIS2_PLACEMENT_3D('',#231089,#231090,#231091); +#231089 = CARTESIAN_POINT('',(103.87646880902,-55.94214693751,1.585)); +#231090 = DIRECTION('',(0.,0.,-1.)); +#231091 = DIRECTION('',(-0.706371375515,-0.707841422815,-0.)); +#231092 = ORIENTED_EDGE('',*,*,#231093,.T.); +#231093 = EDGE_CURVE('',#231085,#231094,#231096,.T.); +#231094 = VERTEX_POINT('',#231095); +#231095 = CARTESIAN_POINT('',(104.801469,-55.867147,1.585)); +#231096 = LINE('',#231097,#231098); +#231097 = CARTESIAN_POINT('',(103.876469,-55.867147,1.585)); +#231098 = VECTOR('',#231099,1.); +#231099 = DIRECTION('',(1.,0.,0.)); +#231100 = ORIENTED_EDGE('',*,*,#231101,.T.); +#231101 = EDGE_CURVE('',#231094,#231102,#231104,.T.); +#231102 = VERTEX_POINT('',#231103); +#231103 = CARTESIAN_POINT('',(104.80291,-55.641801,1.585)); +#231104 = LINE('',#231105,#231106); +#231105 = CARTESIAN_POINT('',(104.801469,-55.867147,1.585)); +#231106 = VECTOR('',#231107,1.); +#231107 = DIRECTION('',(6.394480216655E-03,0.999979555102,0.)); +#231108 = ORIENTED_EDGE('',*,*,#231109,.T.); +#231109 = EDGE_CURVE('',#231102,#231110,#231112,.T.); +#231110 = VERTEX_POINT('',#231111); +#231111 = CARTESIAN_POINT('',(104.814109,-55.614765,1.585)); +#231112 = LINE('',#231113,#231114); +#231113 = CARTESIAN_POINT('',(104.80291,-55.641801,1.585)); +#231114 = VECTOR('',#231115,1.); +#231115 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#231116 = ORIENTED_EDGE('',*,*,#231117,.T.); +#231117 = EDGE_CURVE('',#231110,#230992,#231118,.T.); +#231118 = LINE('',#231119,#231120); +#231119 = CARTESIAN_POINT('',(104.814109,-55.614765,1.585)); +#231120 = VECTOR('',#231121,1.); +#231121 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#231122 = PLANE('',#231123); +#231123 = AXIS2_PLACEMENT_3D('',#231124,#231125,#231126); +#231124 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231125 = DIRECTION('',(0.,0.,1.)); +#231126 = DIRECTION('',(1.,0.,-0.)); +#231127 = SHELL_BASED_SURFACE_MODEL('',(#231128)); +#231128 = OPEN_SHELL('',(#231129)); +#231129 = ADVANCED_FACE('',(#231130),#231315,.T.); +#231130 = FACE_BOUND('',#231131,.F.); +#231131 = EDGE_LOOP('',(#231132,#231143,#231151,#231160,#231168,#231177, + #231185,#231193,#231201,#231210,#231218,#231227,#231235,#231244, + #231252,#231260,#231268,#231276,#231284,#231292,#231300,#231309)); +#231132 = ORIENTED_EDGE('',*,*,#231133,.T.); +#231133 = EDGE_CURVE('',#231134,#231136,#231138,.T.); +#231134 = VERTEX_POINT('',#231135); +#231135 = CARTESIAN_POINT('',(176.780039,-55.101216,1.585)); +#231136 = VERTEX_POINT('',#231137); +#231137 = CARTESIAN_POINT('',(176.87474,-55.216609,1.585)); +#231138 = CIRCLE('',#231139,7.500003178656E-02); +#231139 = AXIS2_PLACEMENT_3D('',#231140,#231141,#231142); +#231140 = CARTESIAN_POINT('',(176.8217065,-55.16357643787,1.585)); +#231141 = DIRECTION('',(0.,0.,-1.)); +#231142 = DIRECTION('',(-0.555566431206,0.83147215258,0.)); +#231143 = ORIENTED_EDGE('',*,*,#231144,.T.); +#231144 = EDGE_CURVE('',#231136,#231145,#231147,.T.); +#231145 = VERTEX_POINT('',#231146); +#231146 = CARTESIAN_POINT('',(176.83964,-55.251708,1.585)); +#231147 = LINE('',#231148,#231149); +#231148 = CARTESIAN_POINT('',(176.87474,-55.216609,1.585)); +#231149 = VECTOR('',#231150,1.); +#231150 = DIRECTION('',(-0.707116854004,-0.707096708225,0.)); +#231151 = ORIENTED_EDGE('',*,*,#231152,.T.); +#231152 = EDGE_CURVE('',#231145,#231153,#231155,.T.); +#231153 = VERTEX_POINT('',#231154); +#231154 = CARTESIAN_POINT('',(176.83964,-55.551633,1.585)); +#231155 = CIRCLE('',#231156,0.299310989749); +#231156 = AXIS2_PLACEMENT_3D('',#231157,#231158,#231159); +#231157 = CARTESIAN_POINT('',(177.09867342868,-55.4016705,1.585)); +#231158 = DIRECTION('',(0.,0.,1.)); +#231159 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#231160 = ORIENTED_EDGE('',*,*,#231161,.T.); +#231161 = EDGE_CURVE('',#231153,#231162,#231164,.T.); +#231162 = VERTEX_POINT('',#231163); +#231163 = CARTESIAN_POINT('',(176.913753,-55.625746,1.585)); +#231164 = LINE('',#231165,#231166); +#231165 = CARTESIAN_POINT('',(176.83964,-55.551633,1.585)); +#231166 = VECTOR('',#231167,1.); +#231167 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#231168 = ORIENTED_EDGE('',*,*,#231169,.T.); +#231169 = EDGE_CURVE('',#231162,#231170,#231172,.T.); +#231170 = VERTEX_POINT('',#231171); +#231171 = CARTESIAN_POINT('',(177.288663,-55.707623,1.585)); +#231172 = CIRCLE('',#231173,0.611738044646); +#231173 = AXIS2_PLACEMENT_3D('',#231174,#231175,#231176); +#231174 = CARTESIAN_POINT('',(177.22514337395,-55.09919166256,1.585)); +#231175 = DIRECTION('',(0.,0.,1.)); +#231176 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#231177 = ORIENTED_EDGE('',*,*,#231178,.T.); +#231178 = EDGE_CURVE('',#231170,#231179,#231181,.T.); +#231179 = VERTEX_POINT('',#231180); +#231180 = CARTESIAN_POINT('',(177.462197,-55.664239,1.585)); +#231181 = LINE('',#231182,#231183); +#231182 = CARTESIAN_POINT('',(177.288663,-55.707623,1.585)); +#231183 = VECTOR('',#231184,1.); +#231184 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#231185 = ORIENTED_EDGE('',*,*,#231186,.T.); +#231186 = EDGE_CURVE('',#231179,#231187,#231189,.T.); +#231187 = VERTEX_POINT('',#231188); +#231188 = CARTESIAN_POINT('',(177.539184,-55.625745,1.585)); +#231189 = LINE('',#231190,#231191); +#231190 = CARTESIAN_POINT('',(177.462197,-55.664239,1.585)); +#231191 = VECTOR('',#231192,1.); +#231192 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#231193 = ORIENTED_EDGE('',*,*,#231194,.T.); +#231194 = EDGE_CURVE('',#231187,#231195,#231197,.T.); +#231195 = VERTEX_POINT('',#231196); +#231196 = CARTESIAN_POINT('',(177.613298,-55.551632,1.585)); +#231197 = LINE('',#231198,#231199); +#231198 = CARTESIAN_POINT('',(177.539184,-55.625745,1.585)); +#231199 = VECTOR('',#231200,1.); +#231200 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#231201 = ORIENTED_EDGE('',*,*,#231202,.T.); +#231202 = EDGE_CURVE('',#231195,#231203,#231205,.T.); +#231203 = VERTEX_POINT('',#231204); +#231204 = CARTESIAN_POINT('',(177.613298,-55.251709,1.585)); +#231205 = CIRCLE('',#231206,0.299306284995); +#231206 = AXIS2_PLACEMENT_3D('',#231207,#231208,#231209); +#231207 = CARTESIAN_POINT('',(177.35426942868,-55.4016705,1.585)); +#231208 = DIRECTION('',(0.,-0.,1.)); +#231209 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#231210 = ORIENTED_EDGE('',*,*,#231211,.T.); +#231211 = EDGE_CURVE('',#231203,#231212,#231214,.T.); +#231212 = VERTEX_POINT('',#231213); +#231213 = CARTESIAN_POINT('',(177.56887,-55.205244,1.585)); +#231214 = LINE('',#231215,#231216); +#231215 = CARTESIAN_POINT('',(177.613298,-55.251709,1.585)); +#231216 = VECTOR('',#231217,1.); +#231217 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#231218 = ORIENTED_EDGE('',*,*,#231219,.T.); +#231219 = EDGE_CURVE('',#231212,#231220,#231222,.T.); +#231220 = VERTEX_POINT('',#231221); +#231221 = CARTESIAN_POINT('',(177.684262,-55.110542,1.585)); +#231222 = CIRCLE('',#231223,7.499993690526E-02); +#231223 = AXIS2_PLACEMENT_3D('',#231224,#231225,#231226); +#231224 = CARTESIAN_POINT('',(177.63122982375,-55.16357575169,1.585)); +#231225 = DIRECTION('',(0.,0.,-1.)); +#231226 = DIRECTION('',(-0.831465016204,-0.555577111505,-0.)); +#231227 = ORIENTED_EDGE('',*,*,#231228,.T.); +#231228 = EDGE_CURVE('',#231220,#231229,#231231,.T.); +#231229 = VERTEX_POINT('',#231230); +#231230 = CARTESIAN_POINT('',(177.744007,-55.174052,1.585)); +#231231 = LINE('',#231232,#231233); +#231232 = CARTESIAN_POINT('',(177.684262,-55.110542,1.585)); +#231233 = VECTOR('',#231234,1.); +#231234 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#231235 = ORIENTED_EDGE('',*,*,#231236,.T.); +#231236 = EDGE_CURVE('',#231229,#231237,#231239,.T.); +#231237 = VERTEX_POINT('',#231238); +#231238 = CARTESIAN_POINT('',(177.741211,-55.633815,1.585)); +#231239 = CIRCLE('',#231240,0.461068563463); +#231240 = AXIS2_PLACEMENT_3D('',#231241,#231242,#231243); +#231241 = CARTESIAN_POINT('',(177.34294557362,-55.40150298919,1.585)); +#231242 = DIRECTION('',(0.,0.,-1.)); +#231243 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#231244 = ORIENTED_EDGE('',*,*,#231245,.T.); +#231245 = EDGE_CURVE('',#231237,#231246,#231248,.T.); +#231246 = VERTEX_POINT('',#231247); +#231247 = CARTESIAN_POINT('',(177.623448,-55.750503,1.585)); +#231248 = LINE('',#231249,#231250); +#231249 = CARTESIAN_POINT('',(177.741211,-55.633815,1.585)); +#231250 = VECTOR('',#231251,1.); +#231251 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#231252 = ORIENTED_EDGE('',*,*,#231253,.T.); +#231253 = EDGE_CURVE('',#231246,#231254,#231256,.T.); +#231254 = VERTEX_POINT('',#231255); +#231255 = CARTESIAN_POINT('',(177.506563,-55.807765,1.585)); +#231256 = LINE('',#231257,#231258); +#231257 = CARTESIAN_POINT('',(177.623448,-55.750503,1.585)); +#231258 = VECTOR('',#231259,1.); +#231259 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#231260 = ORIENTED_EDGE('',*,*,#231261,.T.); +#231261 = EDGE_CURVE('',#231254,#231262,#231264,.T.); +#231262 = VERTEX_POINT('',#231263); +#231263 = CARTESIAN_POINT('',(177.297897,-55.857623,1.585)); +#231264 = LINE('',#231265,#231266); +#231265 = CARTESIAN_POINT('',(177.506563,-55.807765,1.585)); +#231266 = VECTOR('',#231267,1.); +#231267 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#231268 = ORIENTED_EDGE('',*,*,#231269,.T.); +#231269 = EDGE_CURVE('',#231262,#231270,#231272,.T.); +#231270 = VERTEX_POINT('',#231271); +#231271 = CARTESIAN_POINT('',(177.13685,-55.855384,1.585)); +#231272 = LINE('',#231273,#231274); +#231273 = CARTESIAN_POINT('',(177.297897,-55.857623,1.585)); +#231274 = VECTOR('',#231275,1.); +#231275 = DIRECTION('',(-0.999903370449,1.390143030563E-02,0.)); +#231276 = ORIENTED_EDGE('',*,*,#231277,.T.); +#231277 = EDGE_CURVE('',#231270,#231278,#231280,.T.); +#231278 = VERTEX_POINT('',#231279); +#231279 = CARTESIAN_POINT('',(176.931023,-55.802086,1.585)); +#231280 = LINE('',#231281,#231282); +#231281 = CARTESIAN_POINT('',(177.13685,-55.855384,1.585)); +#231282 = VECTOR('',#231283,1.); +#231283 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#231284 = ORIENTED_EDGE('',*,*,#231285,.T.); +#231285 = EDGE_CURVE('',#231278,#231286,#231288,.T.); +#231286 = VERTEX_POINT('',#231287); +#231287 = CARTESIAN_POINT('',(176.822043,-55.745138,1.585)); +#231288 = LINE('',#231289,#231290); +#231289 = CARTESIAN_POINT('',(176.931023,-55.802086,1.585)); +#231290 = VECTOR('',#231291,1.); +#231291 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#231292 = ORIENTED_EDGE('',*,*,#231293,.T.); +#231293 = EDGE_CURVE('',#231286,#231294,#231296,.T.); +#231294 = VERTEX_POINT('',#231295); +#231295 = CARTESIAN_POINT('',(176.708931,-55.629289,1.585)); +#231296 = LINE('',#231297,#231298); +#231297 = CARTESIAN_POINT('',(176.822043,-55.745138,1.585)); +#231298 = VECTOR('',#231299,1.); +#231299 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#231300 = ORIENTED_EDGE('',*,*,#231301,.T.); +#231301 = EDGE_CURVE('',#231294,#231302,#231304,.T.); +#231302 = VERTEX_POINT('',#231303); +#231303 = CARTESIAN_POINT('',(176.711728,-55.169527,1.585)); +#231304 = CIRCLE('',#231305,0.461058290907); +#231305 = AXIS2_PLACEMENT_3D('',#231306,#231307,#231308); +#231306 = CARTESIAN_POINT('',(177.10998135644,-55.40183931499,1.585)); +#231307 = DIRECTION('',(0.,0.,-1.)); +#231308 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#231309 = ORIENTED_EDGE('',*,*,#231310,.T.); +#231310 = EDGE_CURVE('',#231302,#231134,#231311,.T.); +#231311 = LINE('',#231312,#231313); +#231312 = CARTESIAN_POINT('',(176.711728,-55.169527,1.585)); +#231313 = VECTOR('',#231314,1.); +#231314 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#231315 = PLANE('',#231316); +#231316 = AXIS2_PLACEMENT_3D('',#231317,#231318,#231319); +#231317 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231318 = DIRECTION('',(0.,0.,1.)); +#231319 = DIRECTION('',(1.,0.,-0.)); +#231320 = SHELL_BASED_SURFACE_MODEL('',(#231321)); +#231321 = OPEN_SHELL('',(#231322)); +#231322 = ADVANCED_FACE('',(#231323),#231367,.T.); +#231323 = FACE_BOUND('',#231324,.F.); +#231324 = EDGE_LOOP('',(#231325,#231336,#231344,#231353,#231361)); +#231325 = ORIENTED_EDGE('',*,*,#231326,.T.); +#231326 = EDGE_CURVE('',#231327,#231329,#231331,.T.); +#231327 = VERTEX_POINT('',#231328); +#231328 = CARTESIAN_POINT('',(160.558017,-55.294981,1.585)); +#231329 = VERTEX_POINT('',#231330); +#231330 = CARTESIAN_POINT('',(160.67345,-55.317942,1.585)); +#231331 = CIRCLE('',#231332,6.000007318647E-02); +#231332 = AXIS2_PLACEMENT_3D('',#231333,#231334,#231335); +#231333 = CARTESIAN_POINT('',(160.61344992681,-55.31794182331,1.585)); +#231334 = DIRECTION('',(0.,0.,-1.)); +#231335 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#231336 = ORIENTED_EDGE('',*,*,#231337,.T.); +#231337 = EDGE_CURVE('',#231329,#231338,#231340,.T.); +#231338 = VERTEX_POINT('',#231339); +#231339 = CARTESIAN_POINT('',(160.67345,-55.792458,1.585)); +#231340 = LINE('',#231341,#231342); +#231341 = CARTESIAN_POINT('',(160.67345,-55.317942,1.585)); +#231342 = VECTOR('',#231343,1.); +#231343 = DIRECTION('',(0.,-1.,0.)); +#231344 = ORIENTED_EDGE('',*,*,#231345,.T.); +#231345 = EDGE_CURVE('',#231338,#231346,#231348,.T.); +#231346 = VERTEX_POINT('',#231347); +#231347 = CARTESIAN_POINT('',(160.55345,-55.792458,1.585)); +#231348 = CIRCLE('',#231349,6.000000000043E-02); +#231349 = AXIS2_PLACEMENT_3D('',#231350,#231351,#231352); +#231350 = CARTESIAN_POINT('',(160.61345,-55.79245822558,1.585)); +#231351 = DIRECTION('',(0.,0.,-1.)); +#231352 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#231353 = ORIENTED_EDGE('',*,*,#231354,.T.); +#231354 = EDGE_CURVE('',#231346,#231355,#231357,.T.); +#231355 = VERTEX_POINT('',#231356); +#231356 = CARTESIAN_POINT('',(160.55345,-55.317942,1.585)); +#231357 = LINE('',#231358,#231359); +#231358 = CARTESIAN_POINT('',(160.55345,-55.792458,1.585)); +#231359 = VECTOR('',#231360,1.); +#231360 = DIRECTION('',(0.,1.,0.)); +#231361 = ORIENTED_EDGE('',*,*,#231362,.T.); +#231362 = EDGE_CURVE('',#231355,#231327,#231363,.T.); +#231363 = LINE('',#231364,#231365); +#231364 = CARTESIAN_POINT('',(160.55345,-55.317942,1.585)); +#231365 = VECTOR('',#231366,1.); +#231366 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#231367 = PLANE('',#231368); +#231368 = AXIS2_PLACEMENT_3D('',#231369,#231370,#231371); +#231369 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231370 = DIRECTION('',(0.,0.,1.)); +#231371 = DIRECTION('',(1.,0.,-0.)); +#231372 = SHELL_BASED_SURFACE_MODEL('',(#231373)); +#231373 = OPEN_SHELL('',(#231374)); +#231374 = ADVANCED_FACE('',(#231375),#231419,.T.); +#231375 = FACE_BOUND('',#231376,.F.); +#231376 = EDGE_LOOP('',(#231377,#231388,#231396,#231405,#231413)); +#231377 = ORIENTED_EDGE('',*,*,#231378,.T.); +#231378 = EDGE_CURVE('',#231379,#231381,#231383,.T.); +#231379 = VERTEX_POINT('',#231380); +#231380 = CARTESIAN_POINT('',(161.603017,-55.294981,1.585)); +#231381 = VERTEX_POINT('',#231382); +#231382 = CARTESIAN_POINT('',(161.71845,-55.317942,1.585)); +#231383 = CIRCLE('',#231384,6.000007318647E-02); +#231384 = AXIS2_PLACEMENT_3D('',#231385,#231386,#231387); +#231385 = CARTESIAN_POINT('',(161.65844992681,-55.31794182331,1.585)); +#231386 = DIRECTION('',(0.,0.,-1.)); +#231387 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#231388 = ORIENTED_EDGE('',*,*,#231389,.T.); +#231389 = EDGE_CURVE('',#231381,#231390,#231392,.T.); +#231390 = VERTEX_POINT('',#231391); +#231391 = CARTESIAN_POINT('',(161.71845,-55.792458,1.585)); +#231392 = LINE('',#231393,#231394); +#231393 = CARTESIAN_POINT('',(161.71845,-55.317942,1.585)); +#231394 = VECTOR('',#231395,1.); +#231395 = DIRECTION('',(0.,-1.,0.)); +#231396 = ORIENTED_EDGE('',*,*,#231397,.T.); +#231397 = EDGE_CURVE('',#231390,#231398,#231400,.T.); +#231398 = VERTEX_POINT('',#231399); +#231399 = CARTESIAN_POINT('',(161.59845,-55.792458,1.585)); +#231400 = CIRCLE('',#231401,6.000000000042E-02); +#231401 = AXIS2_PLACEMENT_3D('',#231402,#231403,#231404); +#231402 = CARTESIAN_POINT('',(161.65845,-55.79245822558,1.585)); +#231403 = DIRECTION('',(0.,0.,-1.)); +#231404 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#231405 = ORIENTED_EDGE('',*,*,#231406,.T.); +#231406 = EDGE_CURVE('',#231398,#231407,#231409,.T.); +#231407 = VERTEX_POINT('',#231408); +#231408 = CARTESIAN_POINT('',(161.59845,-55.317942,1.585)); +#231409 = LINE('',#231410,#231411); +#231410 = CARTESIAN_POINT('',(161.59845,-55.792458,1.585)); +#231411 = VECTOR('',#231412,1.); +#231412 = DIRECTION('',(0.,1.,0.)); +#231413 = ORIENTED_EDGE('',*,*,#231414,.T.); +#231414 = EDGE_CURVE('',#231407,#231379,#231415,.T.); +#231415 = LINE('',#231416,#231417); +#231416 = CARTESIAN_POINT('',(161.59845,-55.317942,1.585)); +#231417 = VECTOR('',#231418,1.); +#231418 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#231419 = PLANE('',#231420); +#231420 = AXIS2_PLACEMENT_3D('',#231421,#231422,#231423); +#231421 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231422 = DIRECTION('',(0.,0.,1.)); +#231423 = DIRECTION('',(1.,0.,-0.)); +#231424 = SHELL_BASED_SURFACE_MODEL('',(#231425)); +#231425 = OPEN_SHELL('',(#231426)); +#231426 = ADVANCED_FACE('',(#231427),#231529,.T.); +#231427 = FACE_BOUND('',#231428,.F.); +#231428 = EDGE_LOOP('',(#231429,#231440,#231448,#231457,#231465,#231474, + #231482,#231491,#231499,#231507,#231515,#231523)); +#231429 = ORIENTED_EDGE('',*,*,#231430,.T.); +#231430 = EDGE_CURVE('',#231431,#231433,#231435,.T.); +#231431 = VERTEX_POINT('',#231432); +#231432 = CARTESIAN_POINT('',(159.452434,-55.373792,1.585)); +#231433 = VERTEX_POINT('',#231434); +#231434 = CARTESIAN_POINT('',(159.569102,-55.436152,1.585)); +#231435 = CIRCLE('',#231436,7.500000000001E-02); +#231436 = AXIS2_PLACEMENT_3D('',#231437,#231438,#231439); +#231437 = CARTESIAN_POINT('',(159.494102,-55.43615206555,1.585)); +#231438 = DIRECTION('',(0.,0.,-1.)); +#231439 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#231440 = ORIENTED_EDGE('',*,*,#231441,.T.); +#231441 = EDGE_CURVE('',#231433,#231442,#231444,.T.); +#231442 = VERTEX_POINT('',#231443); +#231443 = CARTESIAN_POINT('',(159.569102,-55.513685,1.585)); +#231444 = LINE('',#231445,#231446); +#231445 = CARTESIAN_POINT('',(159.569102,-55.436152,1.585)); +#231446 = VECTOR('',#231447,1.); +#231447 = DIRECTION('',(0.,-1.,0.)); +#231448 = ORIENTED_EDGE('',*,*,#231449,.T.); +#231449 = EDGE_CURVE('',#231442,#231450,#231452,.T.); +#231450 = VERTEX_POINT('',#231451); +#231451 = CARTESIAN_POINT('',(159.702283,-55.646866,1.585)); +#231452 = CIRCLE('',#231453,0.18686440374); +#231453 = AXIS2_PLACEMENT_3D('',#231454,#231455,#231456); +#231454 = CARTESIAN_POINT('',(159.749819,-55.466149,1.585)); +#231455 = DIRECTION('',(0.,0.,1.)); +#231456 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#231457 = ORIENTED_EDGE('',*,*,#231458,.T.); +#231458 = EDGE_CURVE('',#231450,#231459,#231461,.T.); +#231459 = VERTEX_POINT('',#231460); +#231460 = CARTESIAN_POINT('',(160.175401,-55.648307,1.585)); +#231461 = LINE('',#231462,#231463); +#231462 = CARTESIAN_POINT('',(159.702283,-55.646866,1.585)); +#231463 = VECTOR('',#231464,1.); +#231464 = DIRECTION('',(0.99999536173,-3.045737672744E-03,0.)); +#231465 = ORIENTED_EDGE('',*,*,#231466,.T.); +#231466 = EDGE_CURVE('',#231459,#231467,#231469,.T.); +#231467 = VERTEX_POINT('',#231468); +#231468 = CARTESIAN_POINT('',(160.160769,-55.796866,1.585)); +#231469 = CIRCLE('',#231470,7.500006711464E-02); +#231470 = AXIS2_PLACEMENT_3D('',#231471,#231472,#231473); +#231471 = CARTESIAN_POINT('',(160.16076906711,-55.72186593288,1.585)); +#231472 = DIRECTION('',(0.,0.,-1.)); +#231473 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#231474 = ORIENTED_EDGE('',*,*,#231475,.T.); +#231475 = EDGE_CURVE('',#231467,#231476,#231478,.T.); +#231476 = VERTEX_POINT('',#231477); +#231477 = CARTESIAN_POINT('',(159.47947,-55.795425,1.585)); +#231478 = LINE('',#231479,#231480); +#231479 = CARTESIAN_POINT('',(160.160769,-55.796866,1.585)); +#231480 = VECTOR('',#231481,1.); +#231481 = DIRECTION('',(-0.999997763232,2.115072496535E-03,0.)); +#231482 = ORIENTED_EDGE('',*,*,#231483,.T.); +#231483 = EDGE_CURVE('',#231476,#231484,#231486,.T.); +#231484 = VERTEX_POINT('',#231485); +#231485 = CARTESIAN_POINT('',(159.452434,-55.659506,1.585)); +#231486 = CIRCLE('',#231487,7.499998360397E-02); +#231487 = AXIS2_PLACEMENT_3D('',#231488,#231489,#231490); +#231488 = CARTESIAN_POINT('',(159.49410186186,-55.72186613813,1.585)); +#231489 = DIRECTION('',(0.,0.,-1.)); +#231490 = DIRECTION('',(-0.19509153419,-0.980785039286,-0.)); +#231491 = ORIENTED_EDGE('',*,*,#231492,.T.); +#231492 = EDGE_CURVE('',#231484,#231493,#231495,.T.); +#231493 = VERTEX_POINT('',#231494); +#231494 = CARTESIAN_POINT('',(159.470554,-55.652,1.585)); +#231495 = LINE('',#231496,#231497); +#231496 = CARTESIAN_POINT('',(159.452434,-55.659506,1.585)); +#231497 = VECTOR('',#231498,1.); +#231498 = DIRECTION('',(0.923871415933,0.382703026931,0.)); +#231499 = ORIENTED_EDGE('',*,*,#231500,.T.); +#231500 = EDGE_CURVE('',#231493,#231501,#231503,.T.); +#231501 = VERTEX_POINT('',#231502); +#231502 = CARTESIAN_POINT('',(159.420543,-55.546022,1.585)); +#231503 = LINE('',#231504,#231505); +#231504 = CARTESIAN_POINT('',(159.470554,-55.652,1.585)); +#231505 = VECTOR('',#231506,1.); +#231506 = DIRECTION('',(-0.426767891505,0.904361192655,0.)); +#231507 = ORIENTED_EDGE('',*,*,#231508,.T.); +#231508 = EDGE_CURVE('',#231501,#231509,#231511,.T.); +#231509 = VERTEX_POINT('',#231510); +#231510 = CARTESIAN_POINT('',(159.420543,-55.42152,1.585)); +#231511 = LINE('',#231512,#231513); +#231512 = CARTESIAN_POINT('',(159.420543,-55.546022,1.585)); +#231513 = VECTOR('',#231514,1.); +#231514 = DIRECTION('',(0.,1.,0.)); +#231515 = ORIENTED_EDGE('',*,*,#231516,.T.); +#231516 = EDGE_CURVE('',#231509,#231517,#231519,.T.); +#231517 = VERTEX_POINT('',#231518); +#231518 = CARTESIAN_POINT('',(159.431742,-55.394484,1.585)); +#231519 = LINE('',#231520,#231521); +#231520 = CARTESIAN_POINT('',(159.420543,-55.42152,1.585)); +#231521 = VECTOR('',#231522,1.); +#231522 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#231523 = ORIENTED_EDGE('',*,*,#231524,.T.); +#231524 = EDGE_CURVE('',#231517,#231431,#231525,.T.); +#231525 = LINE('',#231526,#231527); +#231526 = CARTESIAN_POINT('',(159.431742,-55.394484,1.585)); +#231527 = VECTOR('',#231528,1.); +#231528 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#231529 = PLANE('',#231530); +#231530 = AXIS2_PLACEMENT_3D('',#231531,#231532,#231533); +#231531 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231532 = DIRECTION('',(0.,0.,1.)); +#231533 = DIRECTION('',(1.,0.,-0.)); +#231534 = SHELL_BASED_SURFACE_MODEL('',(#231535)); +#231535 = OPEN_SHELL('',(#231536)); +#231536 = ADVANCED_FACE('',(#231537),#231597,.T.); +#231537 = FACE_BOUND('',#231538,.F.); +#231538 = EDGE_LOOP('',(#231539,#231550,#231558,#231566,#231574,#231582, + #231591)); +#231539 = ORIENTED_EDGE('',*,*,#231540,.T.); +#231540 = EDGE_CURVE('',#231541,#231543,#231545,.T.); +#231541 = VERTEX_POINT('',#231542); +#231542 = CARTESIAN_POINT('',(171.57665,-55.5881,1.585)); +#231543 = VERTEX_POINT('',#231544); +#231544 = CARTESIAN_POINT('',(171.528126,-55.49281,1.585)); +#231545 = CIRCLE('',#231546,6.000027696173E-02); +#231546 = AXIS2_PLACEMENT_3D('',#231547,#231548,#231549); +#231547 = CARTESIAN_POINT('',(171.57665092846,-55.52809972304,1.585)); +#231548 = DIRECTION('',(0.,0.,-1.)); +#231549 = DIRECTION('',(-1.547440111751E-05,-0.99999999988,-0.)); +#231550 = ORIENTED_EDGE('',*,*,#231551,.T.); +#231551 = EDGE_CURVE('',#231543,#231552,#231554,.T.); +#231552 = VERTEX_POINT('',#231553); +#231553 = CARTESIAN_POINT('',(171.768126,-55.16281,1.585)); +#231554 = LINE('',#231555,#231556); +#231555 = CARTESIAN_POINT('',(171.528126,-55.49281,1.585)); +#231556 = VECTOR('',#231557,1.); +#231557 = DIRECTION('',(0.588171697675,0.808736084303,0.)); +#231558 = ORIENTED_EDGE('',*,*,#231559,.T.); +#231559 = EDGE_CURVE('',#231552,#231560,#231562,.T.); +#231560 = VERTEX_POINT('',#231561); +#231561 = CARTESIAN_POINT('',(171.807292,-55.138834,1.585)); +#231562 = LINE('',#231563,#231564); +#231563 = CARTESIAN_POINT('',(171.768126,-55.16281,1.585)); +#231564 = VECTOR('',#231565,1.); +#231565 = DIRECTION('',(0.852882175679,0.522103432673,0.)); +#231566 = ORIENTED_EDGE('',*,*,#231567,.T.); +#231567 = EDGE_CURVE('',#231560,#231568,#231570,.T.); +#231568 = VERTEX_POINT('',#231569); +#231569 = CARTESIAN_POINT('',(171.85194,-55.149576,1.585)); +#231570 = LINE('',#231571,#231572); +#231571 = CARTESIAN_POINT('',(171.807292,-55.138834,1.585)); +#231572 = VECTOR('',#231573,1.); +#231573 = DIRECTION('',(0.972256295266,-0.233918140202,0.)); +#231574 = ORIENTED_EDGE('',*,*,#231575,.T.); +#231575 = EDGE_CURVE('',#231568,#231576,#231578,.T.); +#231576 = VERTEX_POINT('',#231577); +#231577 = CARTESIAN_POINT('',(172.105174,-55.49281,1.585)); +#231578 = LINE('',#231579,#231580); +#231579 = CARTESIAN_POINT('',(171.85194,-55.149576,1.585)); +#231580 = VECTOR('',#231581,1.); +#231581 = DIRECTION('',(0.593692353743,-0.804692108267,0.)); +#231582 = ORIENTED_EDGE('',*,*,#231583,.T.); +#231583 = EDGE_CURVE('',#231576,#231584,#231586,.T.); +#231584 = VERTEX_POINT('',#231585); +#231585 = CARTESIAN_POINT('',(172.05665,-55.5881,1.585)); +#231586 = CIRCLE('',#231587,5.999941814204E-02); +#231587 = AXIS2_PLACEMENT_3D('',#231588,#231589,#231590); +#231588 = CARTESIAN_POINT('',(172.05665075805,-55.52810058186,1.585)); +#231589 = DIRECTION('',(0.,0.,-1.)); +#231590 = DIRECTION('',(0.80872854189,0.588182068353,0.)); +#231591 = ORIENTED_EDGE('',*,*,#231592,.T.); +#231592 = EDGE_CURVE('',#231584,#231541,#231593,.T.); +#231593 = LINE('',#231594,#231595); +#231594 = CARTESIAN_POINT('',(172.05665,-55.5881,1.585)); +#231595 = VECTOR('',#231596,1.); +#231596 = DIRECTION('',(-1.,0.,0.)); +#231597 = PLANE('',#231598); +#231598 = AXIS2_PLACEMENT_3D('',#231599,#231600,#231601); +#231599 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231600 = DIRECTION('',(0.,0.,1.)); +#231601 = DIRECTION('',(1.,0.,-0.)); +#231602 = SHELL_BASED_SURFACE_MODEL('',(#231603)); +#231603 = OPEN_SHELL('',(#231604)); +#231604 = ADVANCED_FACE('',(#231605),#231697,.T.); +#231605 = FACE_BOUND('',#231606,.F.); +#231606 = EDGE_LOOP('',(#231607,#231618,#231626,#231634,#231642,#231650, + #231658,#231666,#231674,#231683,#231691)); +#231607 = ORIENTED_EDGE('',*,*,#231608,.T.); +#231608 = EDGE_CURVE('',#231609,#231611,#231613,.T.); +#231609 = VERTEX_POINT('',#231610); +#231610 = CARTESIAN_POINT('',(167.101217,-55.170139,1.585)); +#231611 = VERTEX_POINT('',#231612); +#231612 = CARTESIAN_POINT('',(167.212083,-55.170139,1.585)); +#231613 = CIRCLE('',#231614,6.000020841632E-02); +#231614 = AXIS2_PLACEMENT_3D('',#231615,#231616,#231617); +#231615 = CARTESIAN_POINT('',(167.15665,-55.1931,1.585)); +#231616 = DIRECTION('',(0.,0.,-1.)); +#231617 = DIRECTION('',(-0.923880124139,0.382682004047,0.)); +#231618 = ORIENTED_EDGE('',*,*,#231619,.T.); +#231619 = EDGE_CURVE('',#231611,#231620,#231622,.T.); +#231620 = VERTEX_POINT('',#231621); +#231621 = CARTESIAN_POINT('',(167.21665,-55.2281,1.585)); +#231622 = LINE('',#231623,#231624); +#231623 = CARTESIAN_POINT('',(167.212083,-55.170139,1.585)); +#231624 = VECTOR('',#231625,1.); +#231625 = DIRECTION('',(7.855089539687E-02,-0.99691010469,0.)); +#231626 = ORIENTED_EDGE('',*,*,#231627,.T.); +#231627 = EDGE_CURVE('',#231620,#231628,#231630,.T.); +#231628 = VERTEX_POINT('',#231629); +#231629 = CARTESIAN_POINT('',(170.253224,-55.2281,1.585)); +#231630 = LINE('',#231631,#231632); +#231631 = CARTESIAN_POINT('',(167.21665,-55.2281,1.585)); +#231632 = VECTOR('',#231633,1.); +#231633 = DIRECTION('',(1.,0.,0.)); +#231634 = ORIENTED_EDGE('',*,*,#231635,.T.); +#231635 = EDGE_CURVE('',#231628,#231636,#231638,.T.); +#231636 = VERTEX_POINT('',#231637); +#231637 = CARTESIAN_POINT('',(170.229614,-55.23788,1.585)); +#231638 = LINE('',#231639,#231640); +#231639 = CARTESIAN_POINT('',(170.253224,-55.2281,1.585)); +#231640 = VECTOR('',#231641,1.); +#231641 = DIRECTION('',(-0.923873752348,-0.382697386615,0.)); +#231642 = ORIENTED_EDGE('',*,*,#231643,.T.); +#231643 = EDGE_CURVE('',#231636,#231644,#231646,.T.); +#231644 = VERTEX_POINT('',#231645); +#231645 = CARTESIAN_POINT('',(170.18823,-55.279264,1.585)); +#231646 = LINE('',#231647,#231648); +#231647 = CARTESIAN_POINT('',(170.229614,-55.23788,1.585)); +#231648 = VECTOR('',#231649,1.); +#231649 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#231650 = ORIENTED_EDGE('',*,*,#231651,.T.); +#231651 = EDGE_CURVE('',#231644,#231652,#231654,.T.); +#231652 = VERTEX_POINT('',#231653); +#231653 = CARTESIAN_POINT('',(170.165832,-55.333336,1.585)); +#231654 = LINE('',#231655,#231656); +#231655 = CARTESIAN_POINT('',(170.18823,-55.279264,1.585)); +#231656 = VECTOR('',#231657,1.); +#231657 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231658 = ORIENTED_EDGE('',*,*,#231659,.T.); +#231659 = EDGE_CURVE('',#231652,#231660,#231662,.T.); +#231660 = VERTEX_POINT('',#231661); +#231661 = CARTESIAN_POINT('',(170.165832,-55.3481,1.585)); +#231662 = LINE('',#231663,#231664); +#231663 = CARTESIAN_POINT('',(170.165832,-55.333336,1.585)); +#231664 = VECTOR('',#231665,1.); +#231665 = DIRECTION('',(0.,-1.,0.)); +#231666 = ORIENTED_EDGE('',*,*,#231667,.T.); +#231667 = EDGE_CURVE('',#231660,#231668,#231670,.T.); +#231668 = VERTEX_POINT('',#231669); +#231669 = CARTESIAN_POINT('',(167.15665,-55.3481,1.585)); +#231670 = LINE('',#231671,#231672); +#231671 = CARTESIAN_POINT('',(170.165832,-55.3481,1.585)); +#231672 = VECTOR('',#231673,1.); +#231673 = DIRECTION('',(-1.,0.,0.)); +#231674 = ORIENTED_EDGE('',*,*,#231675,.T.); +#231675 = EDGE_CURVE('',#231668,#231676,#231678,.T.); +#231676 = VERTEX_POINT('',#231677); +#231677 = CARTESIAN_POINT('',(167.09665,-55.2881,1.585)); +#231678 = CIRCLE('',#231679,5.999932016259E-02); +#231679 = AXIS2_PLACEMENT_3D('',#231680,#231681,#231682); +#231680 = CARTESIAN_POINT('',(167.15664932015,-55.28810067984,1.585)); +#231681 = DIRECTION('',(0.,0.,-1.)); +#231682 = DIRECTION('',(1.133081612142E-05,-0.999999999936,0.)); +#231683 = ORIENTED_EDGE('',*,*,#231684,.T.); +#231684 = EDGE_CURVE('',#231676,#231685,#231687,.T.); +#231685 = VERTEX_POINT('',#231686); +#231686 = CARTESIAN_POINT('',(167.09665,-55.1931,1.585)); +#231687 = LINE('',#231688,#231689); +#231688 = CARTESIAN_POINT('',(167.09665,-55.2881,1.585)); +#231689 = VECTOR('',#231690,1.); +#231690 = DIRECTION('',(0.,1.,0.)); +#231691 = ORIENTED_EDGE('',*,*,#231692,.T.); +#231692 = EDGE_CURVE('',#231685,#231609,#231693,.T.); +#231693 = LINE('',#231694,#231695); +#231694 = CARTESIAN_POINT('',(167.09665,-55.1931,1.585)); +#231695 = VECTOR('',#231696,1.); +#231696 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#231697 = PLANE('',#231698); +#231698 = AXIS2_PLACEMENT_3D('',#231699,#231700,#231701); +#231699 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231700 = DIRECTION('',(0.,0.,1.)); +#231701 = DIRECTION('',(1.,0.,-0.)); +#231702 = SHELL_BASED_SURFACE_MODEL('',(#231703)); +#231703 = OPEN_SHELL('',(#231704)); +#231704 = ADVANCED_FACE('',(#231705),#231789,.T.); +#231705 = FACE_BOUND('',#231706,.F.); +#231706 = EDGE_LOOP('',(#231707,#231718,#231726,#231735,#231743,#231751, + #231759,#231767,#231775,#231783)); +#231707 = ORIENTED_EDGE('',*,*,#231708,.T.); +#231708 = EDGE_CURVE('',#231709,#231711,#231713,.T.); +#231709 = VERTEX_POINT('',#231710); +#231710 = CARTESIAN_POINT('',(171.221217,-55.170139,1.585)); +#231711 = VERTEX_POINT('',#231712); +#231712 = CARTESIAN_POINT('',(171.33665,-55.1931,1.585)); +#231713 = CIRCLE('',#231714,6.000007318647E-02); +#231714 = AXIS2_PLACEMENT_3D('',#231715,#231716,#231717); +#231715 = CARTESIAN_POINT('',(171.27664992681,-55.19309982331,1.585)); +#231716 = DIRECTION('',(0.,0.,-1.)); +#231717 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#231718 = ORIENTED_EDGE('',*,*,#231719,.T.); +#231719 = EDGE_CURVE('',#231711,#231720,#231722,.T.); +#231720 = VERTEX_POINT('',#231721); +#231721 = CARTESIAN_POINT('',(171.33665,-55.2881,1.585)); +#231722 = LINE('',#231723,#231724); +#231723 = CARTESIAN_POINT('',(171.33665,-55.1931,1.585)); +#231724 = VECTOR('',#231725,1.); +#231725 = DIRECTION('',(0.,-1.,0.)); +#231726 = ORIENTED_EDGE('',*,*,#231727,.T.); +#231727 = EDGE_CURVE('',#231720,#231728,#231730,.T.); +#231728 = VERTEX_POINT('',#231729); +#231729 = CARTESIAN_POINT('',(171.27665,-55.3481,1.585)); +#231730 = CIRCLE('',#231731,5.999932016253E-02); +#231731 = AXIS2_PLACEMENT_3D('',#231732,#231733,#231734); +#231732 = CARTESIAN_POINT('',(171.27665067984,-55.28810067984,1.585)); +#231733 = DIRECTION('',(0.,0.,-1.)); +#231734 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#231735 = ORIENTED_EDGE('',*,*,#231736,.T.); +#231736 = EDGE_CURVE('',#231728,#231737,#231739,.T.); +#231737 = VERTEX_POINT('',#231738); +#231738 = CARTESIAN_POINT('',(170.460068,-55.3481,1.585)); +#231739 = LINE('',#231740,#231741); +#231740 = CARTESIAN_POINT('',(171.27665,-55.3481,1.585)); +#231741 = VECTOR('',#231742,1.); +#231742 = DIRECTION('',(-1.,0.,0.)); +#231743 = ORIENTED_EDGE('',*,*,#231744,.T.); +#231744 = EDGE_CURVE('',#231737,#231745,#231747,.T.); +#231745 = VERTEX_POINT('',#231746); +#231746 = CARTESIAN_POINT('',(170.460068,-55.333336,1.585)); +#231747 = LINE('',#231748,#231749); +#231748 = CARTESIAN_POINT('',(170.460068,-55.3481,1.585)); +#231749 = VECTOR('',#231750,1.); +#231750 = DIRECTION('',(0.,1.,0.)); +#231751 = ORIENTED_EDGE('',*,*,#231752,.T.); +#231752 = EDGE_CURVE('',#231745,#231753,#231755,.T.); +#231753 = VERTEX_POINT('',#231754); +#231754 = CARTESIAN_POINT('',(170.43767,-55.279264,1.585)); +#231755 = LINE('',#231756,#231757); +#231756 = CARTESIAN_POINT('',(170.460068,-55.333336,1.585)); +#231757 = VECTOR('',#231758,1.); +#231758 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#231759 = ORIENTED_EDGE('',*,*,#231760,.T.); +#231760 = EDGE_CURVE('',#231753,#231761,#231763,.T.); +#231761 = VERTEX_POINT('',#231762); +#231762 = CARTESIAN_POINT('',(170.396286,-55.23788,1.585)); +#231763 = LINE('',#231764,#231765); +#231764 = CARTESIAN_POINT('',(170.43767,-55.279264,1.585)); +#231765 = VECTOR('',#231766,1.); +#231766 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#231767 = ORIENTED_EDGE('',*,*,#231768,.T.); +#231768 = EDGE_CURVE('',#231761,#231769,#231771,.T.); +#231769 = VERTEX_POINT('',#231770); +#231770 = CARTESIAN_POINT('',(170.372676,-55.2281,1.585)); +#231771 = LINE('',#231772,#231773); +#231772 = CARTESIAN_POINT('',(170.396286,-55.23788,1.585)); +#231773 = VECTOR('',#231774,1.); +#231774 = DIRECTION('',(-0.923873752348,0.382697386615,0.)); +#231775 = ORIENTED_EDGE('',*,*,#231776,.T.); +#231776 = EDGE_CURVE('',#231769,#231777,#231779,.T.); +#231777 = VERTEX_POINT('',#231778); +#231778 = CARTESIAN_POINT('',(171.21665,-55.2281,1.585)); +#231779 = LINE('',#231780,#231781); +#231780 = CARTESIAN_POINT('',(170.372676,-55.2281,1.585)); +#231781 = VECTOR('',#231782,1.); +#231782 = DIRECTION('',(1.,0.,0.)); +#231783 = ORIENTED_EDGE('',*,*,#231784,.T.); +#231784 = EDGE_CURVE('',#231777,#231709,#231785,.T.); +#231785 = LINE('',#231786,#231787); +#231786 = CARTESIAN_POINT('',(171.21665,-55.2281,1.585)); +#231787 = VECTOR('',#231788,1.); +#231788 = DIRECTION('',(7.855089539736E-02,0.99691010469,0.)); +#231789 = PLANE('',#231790); +#231790 = AXIS2_PLACEMENT_3D('',#231791,#231792,#231793); +#231791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#231792 = DIRECTION('',(0.,0.,1.)); +#231793 = DIRECTION('',(1.,0.,-0.)); +#231794 = SHELL_BASED_SURFACE_MODEL('',(#231795)); +#231795 = OPEN_SHELL('',(#231796)); +#231796 = ADVANCED_FACE('',(#231797,#231969),#232020,.T.); +#231797 = FACE_BOUND('',#231798,.F.); +#231798 = EDGE_LOOP('',(#231799,#231809,#231817,#231825,#231833,#231841, + #231849,#231857,#231865,#231873,#231881,#231890,#231898,#231906, + #231914,#231922,#231930,#231938,#231946,#231954,#231963)); +#231799 = ORIENTED_EDGE('',*,*,#231800,.T.); +#231800 = EDGE_CURVE('',#231801,#231803,#231805,.T.); +#231801 = VERTEX_POINT('',#231802); +#231802 = CARTESIAN_POINT('',(159.50818,-54.654784,1.585)); +#231803 = VERTEX_POINT('',#231804); +#231804 = CARTESIAN_POINT('',(159.622327,-54.600688,1.585)); +#231805 = LINE('',#231806,#231807); +#231806 = CARTESIAN_POINT('',(159.50818,-54.654784,1.585)); +#231807 = VECTOR('',#231808,1.); +#231808 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#231809 = ORIENTED_EDGE('',*,*,#231810,.T.); +#231810 = EDGE_CURVE('',#231803,#231811,#231813,.T.); +#231811 = VERTEX_POINT('',#231812); +#231812 = CARTESIAN_POINT('',(159.746829,-54.600688,1.585)); +#231813 = LINE('',#231814,#231815); +#231814 = CARTESIAN_POINT('',(159.622327,-54.600688,1.585)); +#231815 = VECTOR('',#231816,1.); +#231816 = DIRECTION('',(1.,0.,0.)); +#231817 = ORIENTED_EDGE('',*,*,#231818,.T.); +#231818 = EDGE_CURVE('',#231811,#231819,#231821,.T.); +#231819 = VERTEX_POINT('',#231820); +#231820 = CARTESIAN_POINT('',(159.785174,-54.621158,1.585)); +#231821 = LINE('',#231822,#231823); +#231822 = CARTESIAN_POINT('',(159.746829,-54.600688,1.585)); +#231823 = VECTOR('',#231824,1.); +#231824 = DIRECTION('',(0.882168187729,-0.47093448436,0.)); +#231825 = ORIENTED_EDGE('',*,*,#231826,.T.); +#231826 = EDGE_CURVE('',#231819,#231827,#231829,.T.); +#231827 = VERTEX_POINT('',#231828); +#231828 = CARTESIAN_POINT('',(159.805741,-54.659538,1.585)); +#231829 = LINE('',#231830,#231831); +#231830 = CARTESIAN_POINT('',(159.785174,-54.621158,1.585)); +#231831 = VECTOR('',#231832,1.); +#231832 = DIRECTION('',(0.472333573703,-0.881419874494,0.)); +#231833 = ORIENTED_EDGE('',*,*,#231834,.T.); +#231834 = EDGE_CURVE('',#231827,#231835,#231837,.T.); +#231835 = VERTEX_POINT('',#231836); +#231836 = CARTESIAN_POINT('',(159.88892,-55.075437,1.585)); +#231837 = LINE('',#231838,#231839); +#231838 = CARTESIAN_POINT('',(159.805741,-54.659538,1.585)); +#231839 = VECTOR('',#231840,1.); +#231840 = DIRECTION('',(0.196114321493,-0.980581038418,0.)); +#231841 = ORIENTED_EDGE('',*,*,#231842,.T.); +#231842 = EDGE_CURVE('',#231835,#231843,#231845,.T.); +#231843 = VERTEX_POINT('',#231844); +#231844 = CARTESIAN_POINT('',(160.000206,-55.075437,1.585)); +#231845 = LINE('',#231846,#231847); +#231846 = CARTESIAN_POINT('',(159.88892,-55.075437,1.585)); +#231847 = VECTOR('',#231848,1.); +#231848 = DIRECTION('',(1.,0.,0.)); +#231849 = ORIENTED_EDGE('',*,*,#231850,.T.); +#231850 = EDGE_CURVE('',#231843,#231851,#231853,.T.); +#231851 = VERTEX_POINT('',#231852); +#231852 = CARTESIAN_POINT('',(160.057248,-55.046916,1.585)); +#231853 = LINE('',#231854,#231855); +#231854 = CARTESIAN_POINT('',(160.000206,-55.075437,1.585)); +#231855 = VECTOR('',#231856,1.); +#231856 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#231857 = ORIENTED_EDGE('',*,*,#231858,.T.); +#231858 = EDGE_CURVE('',#231851,#231859,#231861,.T.); +#231859 = VERTEX_POINT('',#231860); +#231860 = CARTESIAN_POINT('',(160.085769,-54.989875,1.585)); +#231861 = LINE('',#231862,#231863); +#231862 = CARTESIAN_POINT('',(160.057248,-55.046916,1.585)); +#231863 = VECTOR('',#231864,1.); +#231864 = DIRECTION('',(0.447219867638,0.894424054904,0.)); +#231865 = ORIENTED_EDGE('',*,*,#231866,.T.); +#231866 = EDGE_CURVE('',#231859,#231867,#231869,.T.); +#231867 = VERTEX_POINT('',#231868); +#231868 = CARTESIAN_POINT('',(160.085769,-54.834809,1.585)); +#231869 = LINE('',#231870,#231871); +#231870 = CARTESIAN_POINT('',(160.085769,-54.989875,1.585)); +#231871 = VECTOR('',#231872,1.); +#231872 = DIRECTION('',(0.,1.,0.)); +#231873 = ORIENTED_EDGE('',*,*,#231874,.T.); +#231874 = EDGE_CURVE('',#231867,#231875,#231877,.T.); +#231875 = VERTEX_POINT('',#231876); +#231876 = CARTESIAN_POINT('',(160.040813,-54.741675,1.585)); +#231877 = LINE('',#231878,#231879); +#231878 = CARTESIAN_POINT('',(160.085769,-54.834809,1.585)); +#231879 = VECTOR('',#231880,1.); +#231880 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#231881 = ORIENTED_EDGE('',*,*,#231882,.T.); +#231882 = EDGE_CURVE('',#231875,#231883,#231885,.T.); +#231883 = VERTEX_POINT('',#231884); +#231884 = CARTESIAN_POINT('',(160.180232,-54.688325,1.585)); +#231885 = CIRCLE('',#231886,7.50000527236E-02); +#231886 = AXIS2_PLACEMENT_3D('',#231887,#231888,#231889); +#231887 = CARTESIAN_POINT('',(160.11314967027,-54.72186555676,1.585)); +#231888 = DIRECTION('',(0.,0.,-1.)); +#231889 = DIRECTION('',(-0.964488259036,-0.264125724196,-0.)); +#231890 = ORIENTED_EDGE('',*,*,#231891,.T.); +#231891 = EDGE_CURVE('',#231883,#231892,#231894,.T.); +#231892 = VERTEX_POINT('',#231893); +#231893 = CARTESIAN_POINT('',(160.234328,-54.802472,1.585)); +#231894 = LINE('',#231895,#231896); +#231895 = CARTESIAN_POINT('',(160.180232,-54.688325,1.585)); +#231896 = VECTOR('',#231897,1.); +#231897 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#231898 = ORIENTED_EDGE('',*,*,#231899,.T.); +#231899 = EDGE_CURVE('',#231892,#231900,#231902,.T.); +#231900 = VERTEX_POINT('',#231901); +#231901 = CARTESIAN_POINT('',(160.233106,-55.02739,1.585)); +#231902 = LINE('',#231903,#231904); +#231903 = CARTESIAN_POINT('',(160.234328,-54.802472,1.585)); +#231904 = VECTOR('',#231905,1.); +#231905 = DIRECTION('',(-5.433010984541E-03,-0.999985241087,0.)); +#231906 = ORIENTED_EDGE('',*,*,#231907,.T.); +#231907 = EDGE_CURVE('',#231900,#231908,#231910,.T.); +#231908 = VERTEX_POINT('',#231909); +#231909 = CARTESIAN_POINT('',(160.1724,-55.148802,1.585)); +#231910 = LINE('',#231911,#231912); +#231911 = CARTESIAN_POINT('',(160.233106,-55.02739,1.585)); +#231912 = VECTOR('',#231913,1.); +#231913 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#231914 = ORIENTED_EDGE('',*,*,#231915,.T.); +#231915 = EDGE_CURVE('',#231908,#231916,#231918,.T.); +#231916 = VERTEX_POINT('',#231917); +#231917 = CARTESIAN_POINT('',(160.146691,-55.1699,1.585)); +#231918 = LINE('',#231919,#231920); +#231919 = CARTESIAN_POINT('',(160.1724,-55.148802,1.585)); +#231920 = VECTOR('',#231921,1.); +#231921 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#231922 = ORIENTED_EDGE('',*,*,#231923,.T.); +#231923 = EDGE_CURVE('',#231916,#231924,#231926,.T.); +#231924 = VERTEX_POINT('',#231925); +#231925 = CARTESIAN_POINT('',(160.032543,-55.223996,1.585)); +#231926 = LINE('',#231927,#231928); +#231927 = CARTESIAN_POINT('',(160.146691,-55.1699,1.585)); +#231928 = VECTOR('',#231929,1.); +#231929 = DIRECTION('',(-0.903658514584,-0.428253767082,0.)); +#231930 = ORIENTED_EDGE('',*,*,#231931,.T.); +#231931 = EDGE_CURVE('',#231924,#231932,#231934,.T.); +#231932 = VERTEX_POINT('',#231933); +#231933 = CARTESIAN_POINT('',(159.617149,-55.222774,1.585)); +#231934 = LINE('',#231935,#231936); +#231935 = CARTESIAN_POINT('',(160.032543,-55.223996,1.585)); +#231936 = VECTOR('',#231937,1.); +#231937 = DIRECTION('',(-0.999995672977,2.941772660118E-03,0.)); +#231938 = ORIENTED_EDGE('',*,*,#231939,.T.); +#231939 = EDGE_CURVE('',#231932,#231940,#231942,.T.); +#231940 = VERTEX_POINT('',#231941); +#231941 = CARTESIAN_POINT('',(159.495737,-55.162068,1.585)); +#231942 = LINE('',#231943,#231944); +#231943 = CARTESIAN_POINT('',(159.617149,-55.222774,1.585)); +#231944 = VECTOR('',#231945,1.); +#231945 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#231946 = ORIENTED_EDGE('',*,*,#231947,.T.); +#231947 = EDGE_CURVE('',#231940,#231948,#231950,.T.); +#231948 = VERTEX_POINT('',#231949); +#231949 = CARTESIAN_POINT('',(159.474639,-55.136359,1.585)); +#231950 = LINE('',#231951,#231952); +#231951 = CARTESIAN_POINT('',(159.495737,-55.162068,1.585)); +#231952 = VECTOR('',#231953,1.); +#231953 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#231954 = ORIENTED_EDGE('',*,*,#231955,.T.); +#231955 = EDGE_CURVE('',#231948,#231956,#231958,.T.); +#231956 = VERTEX_POINT('',#231957); +#231957 = CARTESIAN_POINT('',(159.482471,-54.675882,1.585)); +#231958 = CIRCLE('',#231959,0.396588066051); +#231959 = AXIS2_PLACEMENT_3D('',#231960,#231961,#231962); +#231960 = CARTESIAN_POINT('',(159.80139681991,-54.91161153893,1.585)); +#231961 = DIRECTION('',(0.,0.,-1.)); +#231962 = DIRECTION('',(-0.82392247243,-0.566702531691,-0.)); +#231963 = ORIENTED_EDGE('',*,*,#231964,.T.); +#231964 = EDGE_CURVE('',#231956,#231801,#231965,.T.); +#231965 = LINE('',#231966,#231967); +#231966 = CARTESIAN_POINT('',(159.482471,-54.675882,1.585)); +#231967 = VECTOR('',#231968,1.); +#231968 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#231969 = FACE_BOUND('',#231970,.F.); +#231970 = EDGE_LOOP('',(#231971,#231981,#231989,#231997,#232006,#232014) + ); +#231971 = ORIENTED_EDGE('',*,*,#231972,.T.); +#231972 = EDGE_CURVE('',#231973,#231975,#231977,.T.); +#231973 = VERTEX_POINT('',#231974); +#231974 = CARTESIAN_POINT('',(159.735949,-55.075437,1.585)); +#231975 = VERTEX_POINT('',#231976); +#231976 = CARTESIAN_POINT('',(159.670711,-54.749247,1.585)); +#231977 = LINE('',#231978,#231979); +#231978 = CARTESIAN_POINT('',(159.735949,-55.075437,1.585)); +#231979 = VECTOR('',#231980,1.); +#231980 = DIRECTION('',(-0.196116135138,0.980580675691,0.)); +#231981 = ORIENTED_EDGE('',*,*,#231982,.T.); +#231982 = EDGE_CURVE('',#231975,#231983,#231985,.T.); +#231983 = VERTEX_POINT('',#231984); +#231984 = CARTESIAN_POINT('',(159.654664,-54.749247,1.585)); +#231985 = LINE('',#231986,#231987); +#231986 = CARTESIAN_POINT('',(159.670711,-54.749247,1.585)); +#231987 = VECTOR('',#231988,1.); +#231988 = DIRECTION('',(-1.,0.,0.)); +#231989 = ORIENTED_EDGE('',*,*,#231990,.T.); +#231990 = EDGE_CURVE('',#231983,#231991,#231993,.T.); +#231991 = VERTEX_POINT('',#231992); +#231992 = CARTESIAN_POINT('',(159.597622,-54.777767,1.585)); +#231993 = LINE('',#231994,#231995); +#231994 = CARTESIAN_POINT('',(159.654664,-54.749247,1.585)); +#231995 = VECTOR('',#231996,1.); +#231996 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#231997 = ORIENTED_EDGE('',*,*,#231998,.T.); +#231998 = EDGE_CURVE('',#231991,#231999,#232001,.T.); +#231999 = VERTEX_POINT('',#232000); +#232000 = CARTESIAN_POINT('',(159.597622,-55.046916,1.585)); +#232001 = CIRCLE('',#232002,0.239283669194); +#232002 = AXIS2_PLACEMENT_3D('',#232003,#232004,#232005); +#232003 = CARTESIAN_POINT('',(159.79547643713,-54.9123415,1.585)); +#232004 = DIRECTION('',(0.,0.,1.)); +#232005 = DIRECTION('',(-0.826861431029,0.562405702208,0.)); +#232006 = ORIENTED_EDGE('',*,*,#232007,.T.); +#232007 = EDGE_CURVE('',#231999,#232008,#232010,.T.); +#232008 = VERTEX_POINT('',#232009); +#232009 = CARTESIAN_POINT('',(159.654664,-55.075437,1.585)); +#232010 = LINE('',#232011,#232012); +#232011 = CARTESIAN_POINT('',(159.597622,-55.046916,1.585)); +#232012 = VECTOR('',#232013,1.); +#232013 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#232014 = ORIENTED_EDGE('',*,*,#232015,.T.); +#232015 = EDGE_CURVE('',#232008,#231973,#232016,.T.); +#232016 = LINE('',#232017,#232018); +#232017 = CARTESIAN_POINT('',(159.654664,-55.075437,1.585)); +#232018 = VECTOR('',#232019,1.); +#232019 = DIRECTION('',(1.,0.,0.)); +#232020 = PLANE('',#232021); +#232021 = AXIS2_PLACEMENT_3D('',#232022,#232023,#232024); +#232022 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232023 = DIRECTION('',(0.,0.,1.)); +#232024 = DIRECTION('',(1.,0.,-0.)); +#232025 = SHELL_BASED_SURFACE_MODEL('',(#232026)); +#232026 = OPEN_SHELL('',(#232027)); +#232027 = ADVANCED_FACE('',(#232028),#232130,.T.); +#232028 = FACE_BOUND('',#232029,.F.); +#232029 = EDGE_LOOP('',(#232030,#232041,#232049,#232057,#232065,#232074, + #232082,#232090,#232099,#232107,#232116,#232124)); +#232030 = ORIENTED_EDGE('',*,*,#232031,.T.); +#232031 = EDGE_CURVE('',#232032,#232034,#232036,.T.); +#232032 = VERTEX_POINT('',#232033); +#232033 = CARTESIAN_POINT('',(147.279545,-54.396554,1.585)); +#232034 = VERTEX_POINT('',#232035); +#232035 = CARTESIAN_POINT('',(147.404597,-54.421428,1.585)); +#232036 = CIRCLE('',#232037,6.499988811647E-02); +#232037 = AXIS2_PLACEMENT_3D('',#232038,#232039,#232040); +#232038 = CARTESIAN_POINT('',(147.33959711188,-54.4214282701,1.585)); +#232039 = DIRECTION('',(0.,0.,-1.)); +#232040 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#232041 = ORIENTED_EDGE('',*,*,#232042,.T.); +#232042 = EDGE_CURVE('',#232034,#232043,#232045,.T.); +#232043 = VERTEX_POINT('',#232044); +#232044 = CARTESIAN_POINT('',(147.404597,-54.785,1.585)); +#232045 = LINE('',#232046,#232047); +#232046 = CARTESIAN_POINT('',(147.404597,-54.421428,1.585)); +#232047 = VECTOR('',#232048,1.); +#232048 = DIRECTION('',(0.,-1.,0.)); +#232049 = ORIENTED_EDGE('',*,*,#232050,.T.); +#232050 = EDGE_CURVE('',#232043,#232051,#232053,.T.); +#232051 = VERTEX_POINT('',#232052); +#232052 = CARTESIAN_POINT('',(147.703168,-54.785,1.585)); +#232053 = LINE('',#232054,#232055); +#232054 = CARTESIAN_POINT('',(147.404597,-54.785,1.585)); +#232055 = VECTOR('',#232056,1.); +#232056 = DIRECTION('',(1.,0.,0.)); +#232057 = ORIENTED_EDGE('',*,*,#232058,.T.); +#232058 = EDGE_CURVE('',#232051,#232059,#232061,.T.); +#232059 = VERTEX_POINT('',#232060); +#232060 = CARTESIAN_POINT('',(147.703168,-54.55,1.585)); +#232061 = LINE('',#232062,#232063); +#232062 = CARTESIAN_POINT('',(147.703168,-54.785,1.585)); +#232063 = VECTOR('',#232064,1.); +#232064 = DIRECTION('',(0.,1.,0.)); +#232065 = ORIENTED_EDGE('',*,*,#232066,.T.); +#232066 = EDGE_CURVE('',#232059,#232067,#232069,.T.); +#232067 = VERTEX_POINT('',#232068); +#232068 = CARTESIAN_POINT('',(147.833168,-54.55,1.585)); +#232069 = CIRCLE('',#232070,6.500000000091E-02); +#232070 = AXIS2_PLACEMENT_3D('',#232071,#232072,#232073); +#232071 = CARTESIAN_POINT('',(147.768168,-54.55000034486,1.585)); +#232072 = DIRECTION('',(0.,0.,-1.)); +#232073 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#232074 = ORIENTED_EDGE('',*,*,#232075,.T.); +#232075 = EDGE_CURVE('',#232067,#232076,#232078,.T.); +#232076 = VERTEX_POINT('',#232077); +#232077 = CARTESIAN_POINT('',(147.833168,-54.785,1.585)); +#232078 = LINE('',#232079,#232080); +#232079 = CARTESIAN_POINT('',(147.833168,-54.55,1.585)); +#232080 = VECTOR('',#232081,1.); +#232081 = DIRECTION('',(0.,-1.,0.)); +#232082 = ORIENTED_EDGE('',*,*,#232083,.T.); +#232083 = EDGE_CURVE('',#232076,#232084,#232086,.T.); +#232084 = VERTEX_POINT('',#232085); +#232085 = CARTESIAN_POINT('',(148.239597,-54.785,1.585)); +#232086 = LINE('',#232087,#232088); +#232087 = CARTESIAN_POINT('',(147.833168,-54.785,1.585)); +#232088 = VECTOR('',#232089,1.); +#232089 = DIRECTION('',(1.,0.,0.)); +#232090 = ORIENTED_EDGE('',*,*,#232091,.T.); +#232091 = EDGE_CURVE('',#232084,#232092,#232094,.T.); +#232092 = VERTEX_POINT('',#232093); +#232093 = CARTESIAN_POINT('',(148.239597,-54.915,1.585)); +#232094 = CIRCLE('',#232095,6.500000000092E-02); +#232095 = AXIS2_PLACEMENT_3D('',#232096,#232097,#232098); +#232096 = CARTESIAN_POINT('',(148.23959665513,-54.85,1.585)); +#232097 = DIRECTION('',(0.,0.,-1.)); +#232098 = DIRECTION('',(5.305658462925E-06,0.999999999986,0.)); +#232099 = ORIENTED_EDGE('',*,*,#232100,.T.); +#232100 = EDGE_CURVE('',#232092,#232101,#232103,.T.); +#232101 = VERTEX_POINT('',#232102); +#232102 = CARTESIAN_POINT('',(147.339597,-54.915,1.585)); +#232103 = LINE('',#232104,#232105); +#232104 = CARTESIAN_POINT('',(148.239597,-54.915,1.585)); +#232105 = VECTOR('',#232106,1.); +#232106 = DIRECTION('',(-1.,0.,0.)); +#232107 = ORIENTED_EDGE('',*,*,#232108,.T.); +#232108 = EDGE_CURVE('',#232101,#232109,#232111,.T.); +#232109 = VERTEX_POINT('',#232110); +#232110 = CARTESIAN_POINT('',(147.274597,-54.85,1.585)); +#232111 = CIRCLE('',#232112,6.500103935387E-02); +#232112 = AXIS2_PLACEMENT_3D('',#232113,#232114,#232115); +#232113 = CARTESIAN_POINT('',(147.33959803934,-54.84999896065,1.585)); +#232114 = DIRECTION('',(0.,0.,-1.)); +#232115 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#232116 = ORIENTED_EDGE('',*,*,#232117,.T.); +#232117 = EDGE_CURVE('',#232109,#232118,#232120,.T.); +#232118 = VERTEX_POINT('',#232119); +#232119 = CARTESIAN_POINT('',(147.274597,-54.421428,1.585)); +#232120 = LINE('',#232121,#232122); +#232121 = CARTESIAN_POINT('',(147.274597,-54.85,1.585)); +#232122 = VECTOR('',#232123,1.); +#232123 = DIRECTION('',(0.,1.,0.)); +#232124 = ORIENTED_EDGE('',*,*,#232125,.T.); +#232125 = EDGE_CURVE('',#232118,#232032,#232126,.T.); +#232126 = LINE('',#232127,#232128); +#232127 = CARTESIAN_POINT('',(147.274597,-54.421428,1.585)); +#232128 = VECTOR('',#232129,1.); +#232129 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#232130 = PLANE('',#232131); +#232131 = AXIS2_PLACEMENT_3D('',#232132,#232133,#232134); +#232132 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232133 = DIRECTION('',(0.,0.,1.)); +#232134 = DIRECTION('',(1.,0.,-0.)); +#232135 = SHELL_BASED_SURFACE_MODEL('',(#232136)); +#232136 = OPEN_SHELL('',(#232137)); +#232137 = ADVANCED_FACE('',(#232138),#232274,.T.); +#232138 = FACE_BOUND('',#232139,.F.); +#232139 = EDGE_LOOP('',(#232140,#232150,#232159,#232167,#232176,#232184, + #232192,#232201,#232209,#232217,#232226,#232234,#232243,#232251, + #232259,#232268)); +#232140 = ORIENTED_EDGE('',*,*,#232141,.T.); +#232141 = EDGE_CURVE('',#232142,#232144,#232146,.T.); +#232142 = VERTEX_POINT('',#232143); +#232143 = CARTESIAN_POINT('',(177.800028,-54.387039,1.585)); +#232144 = VERTEX_POINT('',#232145); +#232145 = CARTESIAN_POINT('',(177.798806,-54.611957,1.585)); +#232146 = LINE('',#232147,#232148); +#232147 = CARTESIAN_POINT('',(177.800028,-54.387039,1.585)); +#232148 = VECTOR('',#232149,1.); +#232149 = DIRECTION('',(-5.433010984414E-03,-0.999985241087,0.)); +#232150 = ORIENTED_EDGE('',*,*,#232151,.T.); +#232151 = EDGE_CURVE('',#232144,#232152,#232154,.T.); +#232152 = VERTEX_POINT('',#232153); +#232153 = CARTESIAN_POINT('',(177.550624,-54.856182,1.585)); +#232154 = CIRCLE('',#232155,0.348632713765); +#232155 = AXIS2_PLACEMENT_3D('',#232156,#232157,#232158); +#232156 = CARTESIAN_POINT('',(177.46285597394,-54.51877787627,1.585)); +#232157 = DIRECTION('',(0.,0.,-1.)); +#232158 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#232159 = ORIENTED_EDGE('',*,*,#232160,.T.); +#232160 = EDGE_CURVE('',#232152,#232161,#232163,.T.); +#232161 = VERTEX_POINT('',#232162); +#232162 = CARTESIAN_POINT('',(177.230468,-54.85496,1.585)); +#232163 = LINE('',#232164,#232165); +#232164 = CARTESIAN_POINT('',(177.550624,-54.856182,1.585)); +#232165 = VECTOR('',#232166,1.); +#232166 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#232167 = ORIENTED_EDGE('',*,*,#232168,.T.); +#232168 = EDGE_CURVE('',#232161,#232169,#232171,.T.); +#232169 = VERTEX_POINT('',#232170); +#232170 = CARTESIAN_POINT('',(176.986243,-54.606779,1.585)); +#232171 = CIRCLE('',#232172,0.348628078749); +#232172 = AXIS2_PLACEMENT_3D('',#232173,#232174,#232175); +#232173 = CARTESIAN_POINT('',(177.3236430302,-54.51901364857,1.585)); +#232174 = DIRECTION('',(0.,0.,-1.)); +#232175 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#232176 = ORIENTED_EDGE('',*,*,#232177,.T.); +#232177 = EDGE_CURVE('',#232169,#232178,#232180,.T.); +#232178 = VERTEX_POINT('',#232179); +#232179 = CARTESIAN_POINT('',(176.987465,-54.381862,1.585)); +#232180 = LINE('',#232181,#232182); +#232181 = CARTESIAN_POINT('',(176.986243,-54.606779,1.585)); +#232182 = VECTOR('',#232183,1.); +#232183 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#232184 = ORIENTED_EDGE('',*,*,#232185,.T.); +#232185 = EDGE_CURVE('',#232178,#232186,#232188,.T.); +#232186 = VERTEX_POINT('',#232187); +#232187 = CARTESIAN_POINT('',(177.048171,-54.260449,1.585)); +#232188 = LINE('',#232189,#232190); +#232189 = CARTESIAN_POINT('',(176.987465,-54.381862,1.585)); +#232190 = VECTOR('',#232191,1.); +#232191 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#232192 = ORIENTED_EDGE('',*,*,#232193,.T.); +#232193 = EDGE_CURVE('',#232186,#232194,#232196,.T.); +#232194 = VERTEX_POINT('',#232195); +#232195 = CARTESIAN_POINT('',(177.174503,-54.339974,1.585)); +#232196 = CIRCLE('',#232197,7.500029440362E-02); +#232197 = AXIS2_PLACEMENT_3D('',#232198,#232199,#232200); +#232198 = CARTESIAN_POINT('',(177.10742064867,-54.30643294602,1.585)); +#232199 = DIRECTION('',(0.,0.,-1.)); +#232200 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#232201 = ORIENTED_EDGE('',*,*,#232202,.T.); +#232202 = EDGE_CURVE('',#232194,#232203,#232205,.T.); +#232203 = VERTEX_POINT('',#232204); +#232204 = CARTESIAN_POINT('',(177.134802,-54.419376,1.585)); +#232205 = LINE('',#232206,#232207); +#232206 = CARTESIAN_POINT('',(177.174503,-54.339974,1.585)); +#232207 = VECTOR('',#232208,1.); +#232208 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#232209 = ORIENTED_EDGE('',*,*,#232210,.T.); +#232210 = EDGE_CURVE('',#232203,#232211,#232213,.T.); +#232211 = VERTEX_POINT('',#232212); +#232212 = CARTESIAN_POINT('',(177.134802,-54.574442,1.585)); +#232213 = LINE('',#232214,#232215); +#232214 = CARTESIAN_POINT('',(177.134802,-54.419376,1.585)); +#232215 = VECTOR('',#232216,1.); +#232216 = DIRECTION('',(0.,-1.,0.)); +#232217 = ORIENTED_EDGE('',*,*,#232218,.T.); +#232218 = EDGE_CURVE('',#232211,#232219,#232221,.T.); +#232219 = VERTEX_POINT('',#232220); +#232220 = CARTESIAN_POINT('',(177.267983,-54.707623,1.585)); +#232221 = CIRCLE('',#232222,0.18686440374); +#232222 = AXIS2_PLACEMENT_3D('',#232223,#232224,#232225); +#232223 = CARTESIAN_POINT('',(177.315519,-54.526906,1.585)); +#232224 = DIRECTION('',(0.,0.,1.)); +#232225 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#232226 = ORIENTED_EDGE('',*,*,#232227,.T.); +#232227 = EDGE_CURVE('',#232219,#232228,#232230,.T.); +#232228 = VERTEX_POINT('',#232229); +#232229 = CARTESIAN_POINT('',(177.518287,-54.707623,1.585)); +#232230 = LINE('',#232231,#232232); +#232231 = CARTESIAN_POINT('',(177.267983,-54.707623,1.585)); +#232232 = VECTOR('',#232233,1.); +#232233 = DIRECTION('',(1.,0.,0.)); +#232234 = ORIENTED_EDGE('',*,*,#232235,.T.); +#232235 = EDGE_CURVE('',#232228,#232236,#232238,.T.); +#232236 = VERTEX_POINT('',#232237); +#232237 = CARTESIAN_POINT('',(177.651469,-54.574442,1.585)); +#232238 = CIRCLE('',#232239,0.186872595955); +#232239 = AXIS2_PLACEMENT_3D('',#232240,#232241,#232242); +#232240 = CARTESIAN_POINT('',(177.47074536766,-54.52689901068,1.585)); +#232241 = DIRECTION('',(0.,0.,1.)); +#232242 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#232243 = ORIENTED_EDGE('',*,*,#232244,.T.); +#232244 = EDGE_CURVE('',#232236,#232245,#232247,.T.); +#232245 = VERTEX_POINT('',#232246); +#232246 = CARTESIAN_POINT('',(177.651469,-54.419376,1.585)); +#232247 = LINE('',#232248,#232249); +#232248 = CARTESIAN_POINT('',(177.651469,-54.574442,1.585)); +#232249 = VECTOR('',#232250,1.); +#232250 = DIRECTION('',(0.,1.,0.)); +#232251 = ORIENTED_EDGE('',*,*,#232252,.T.); +#232252 = EDGE_CURVE('',#232245,#232253,#232255,.T.); +#232253 = VERTEX_POINT('',#232254); +#232254 = CARTESIAN_POINT('',(177.606513,-54.326242,1.585)); +#232255 = LINE('',#232256,#232257); +#232256 = CARTESIAN_POINT('',(177.651469,-54.419376,1.585)); +#232257 = VECTOR('',#232258,1.); +#232258 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#232259 = ORIENTED_EDGE('',*,*,#232260,.T.); +#232260 = EDGE_CURVE('',#232253,#232261,#232263,.T.); +#232261 = VERTEX_POINT('',#232262); +#232262 = CARTESIAN_POINT('',(177.745932,-54.272892,1.585)); +#232263 = CIRCLE('',#232264,7.500016685596E-02); +#232264 = AXIS2_PLACEMENT_3D('',#232265,#232266,#232267); +#232265 = CARTESIAN_POINT('',(177.6788500864,-54.30643364422,1.585)); +#232266 = DIRECTION('',(0.,0.,-1.)); +#232267 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#232268 = ORIENTED_EDGE('',*,*,#232269,.T.); +#232269 = EDGE_CURVE('',#232261,#232142,#232270,.T.); +#232270 = LINE('',#232271,#232272); +#232271 = CARTESIAN_POINT('',(177.745932,-54.272892,1.585)); +#232272 = VECTOR('',#232273,1.); +#232273 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#232274 = PLANE('',#232275); +#232275 = AXIS2_PLACEMENT_3D('',#232276,#232277,#232278); +#232276 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232277 = DIRECTION('',(0.,0.,1.)); +#232278 = DIRECTION('',(1.,0.,-0.)); +#232279 = SHELL_BASED_SURFACE_MODEL('',(#232280)); +#232280 = OPEN_SHELL('',(#232281)); +#232281 = ADVANCED_FACE('',(#232282),#232409,.T.); +#232282 = FACE_BOUND('',#232283,.F.); +#232283 = EDGE_LOOP('',(#232284,#232295,#232303,#232311,#232319,#232328, + #232336,#232344,#232352,#232361,#232369,#232378,#232386,#232395, + #232403)); +#232284 = ORIENTED_EDGE('',*,*,#232285,.T.); +#232285 = EDGE_CURVE('',#232286,#232288,#232290,.T.); +#232286 = VERTEX_POINT('',#232287); +#232287 = CARTESIAN_POINT('',(139.649545,-54.160839,1.585)); +#232288 = VERTEX_POINT('',#232289); +#232289 = CARTESIAN_POINT('',(139.774597,-54.185713,1.585)); +#232290 = CIRCLE('',#232291,6.499988811649E-02); +#232291 = AXIS2_PLACEMENT_3D('',#232292,#232293,#232294); +#232292 = CARTESIAN_POINT('',(139.70959711188,-54.1857132701,1.585)); +#232293 = DIRECTION('',(0.,0.,-1.)); +#232294 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#232295 = ORIENTED_EDGE('',*,*,#232296,.T.); +#232296 = EDGE_CURVE('',#232288,#232297,#232299,.T.); +#232297 = VERTEX_POINT('',#232298); +#232298 = CARTESIAN_POINT('',(139.774597,-54.549285,1.585)); +#232299 = LINE('',#232300,#232301); +#232300 = CARTESIAN_POINT('',(139.774597,-54.185713,1.585)); +#232301 = VECTOR('',#232302,1.); +#232302 = DIRECTION('',(0.,-1.,0.)); +#232303 = ORIENTED_EDGE('',*,*,#232304,.T.); +#232304 = EDGE_CURVE('',#232297,#232305,#232307,.T.); +#232305 = VERTEX_POINT('',#232306); +#232306 = CARTESIAN_POINT('',(140.073168,-54.549285,1.585)); +#232307 = LINE('',#232308,#232309); +#232308 = CARTESIAN_POINT('',(139.774597,-54.549285,1.585)); +#232309 = VECTOR('',#232310,1.); +#232310 = DIRECTION('',(1.,0.,0.)); +#232311 = ORIENTED_EDGE('',*,*,#232312,.T.); +#232312 = EDGE_CURVE('',#232305,#232313,#232315,.T.); +#232313 = VERTEX_POINT('',#232314); +#232314 = CARTESIAN_POINT('',(140.073168,-54.314285,1.585)); +#232315 = LINE('',#232316,#232317); +#232316 = CARTESIAN_POINT('',(140.073168,-54.549285,1.585)); +#232317 = VECTOR('',#232318,1.); +#232318 = DIRECTION('',(0.,1.,0.)); +#232319 = ORIENTED_EDGE('',*,*,#232320,.T.); +#232320 = EDGE_CURVE('',#232313,#232321,#232323,.T.); +#232321 = VERTEX_POINT('',#232322); +#232322 = CARTESIAN_POINT('',(140.203168,-54.314285,1.585)); +#232323 = CIRCLE('',#232324,6.500000000091E-02); +#232324 = AXIS2_PLACEMENT_3D('',#232325,#232326,#232327); +#232325 = CARTESIAN_POINT('',(140.138168,-54.31428534486,1.585)); +#232326 = DIRECTION('',(0.,0.,-1.)); +#232327 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#232328 = ORIENTED_EDGE('',*,*,#232329,.T.); +#232329 = EDGE_CURVE('',#232321,#232330,#232332,.T.); +#232330 = VERTEX_POINT('',#232331); +#232331 = CARTESIAN_POINT('',(140.203168,-54.549285,1.585)); +#232332 = LINE('',#232333,#232334); +#232333 = CARTESIAN_POINT('',(140.203168,-54.314285,1.585)); +#232334 = VECTOR('',#232335,1.); +#232335 = DIRECTION('',(0.,-1.,0.)); +#232336 = ORIENTED_EDGE('',*,*,#232337,.T.); +#232337 = EDGE_CURVE('',#232330,#232338,#232340,.T.); +#232338 = VERTEX_POINT('',#232339); +#232339 = CARTESIAN_POINT('',(140.544597,-54.549285,1.585)); +#232340 = LINE('',#232341,#232342); +#232341 = CARTESIAN_POINT('',(140.203168,-54.549285,1.585)); +#232342 = VECTOR('',#232343,1.); +#232343 = DIRECTION('',(1.,0.,0.)); +#232344 = ORIENTED_EDGE('',*,*,#232345,.T.); +#232345 = EDGE_CURVE('',#232338,#232346,#232348,.T.); +#232346 = VERTEX_POINT('',#232347); +#232347 = CARTESIAN_POINT('',(140.544597,-54.185713,1.585)); +#232348 = LINE('',#232349,#232350); +#232349 = CARTESIAN_POINT('',(140.544597,-54.549285,1.585)); +#232350 = VECTOR('',#232351,1.); +#232351 = DIRECTION('',(0.,1.,0.)); +#232352 = ORIENTED_EDGE('',*,*,#232353,.T.); +#232353 = EDGE_CURVE('',#232346,#232354,#232356,.T.); +#232354 = VERTEX_POINT('',#232355); +#232355 = CARTESIAN_POINT('',(140.674597,-54.185713,1.585)); +#232356 = CIRCLE('',#232357,6.500000000091E-02); +#232357 = AXIS2_PLACEMENT_3D('',#232358,#232359,#232360); +#232358 = CARTESIAN_POINT('',(140.609597,-54.18571334486,1.585)); +#232359 = DIRECTION('',(0.,0.,-1.)); +#232360 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#232361 = ORIENTED_EDGE('',*,*,#232362,.T.); +#232362 = EDGE_CURVE('',#232354,#232363,#232365,.T.); +#232363 = VERTEX_POINT('',#232364); +#232364 = CARTESIAN_POINT('',(140.674597,-54.614285,1.585)); +#232365 = LINE('',#232366,#232367); +#232366 = CARTESIAN_POINT('',(140.674597,-54.185713,1.585)); +#232367 = VECTOR('',#232368,1.); +#232368 = DIRECTION('',(0.,-1.,0.)); +#232369 = ORIENTED_EDGE('',*,*,#232370,.T.); +#232370 = EDGE_CURVE('',#232363,#232371,#232373,.T.); +#232371 = VERTEX_POINT('',#232372); +#232372 = CARTESIAN_POINT('',(140.609597,-54.679285,1.585)); +#232373 = CIRCLE('',#232374,6.500103935393E-02); +#232374 = AXIS2_PLACEMENT_3D('',#232375,#232376,#232377); +#232375 = CARTESIAN_POINT('',(140.60959596065,-54.61428396065,1.585)); +#232376 = DIRECTION('',(0.,0.,-1.)); +#232377 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#232378 = ORIENTED_EDGE('',*,*,#232379,.T.); +#232379 = EDGE_CURVE('',#232371,#232380,#232382,.T.); +#232380 = VERTEX_POINT('',#232381); +#232381 = CARTESIAN_POINT('',(139.709597,-54.679285,1.585)); +#232382 = LINE('',#232383,#232384); +#232383 = CARTESIAN_POINT('',(140.609597,-54.679285,1.585)); +#232384 = VECTOR('',#232385,1.); +#232385 = DIRECTION('',(-1.,0.,0.)); +#232386 = ORIENTED_EDGE('',*,*,#232387,.T.); +#232387 = EDGE_CURVE('',#232380,#232388,#232390,.T.); +#232388 = VERTEX_POINT('',#232389); +#232389 = CARTESIAN_POINT('',(139.644597,-54.614285,1.585)); +#232390 = CIRCLE('',#232391,6.500103935387E-02); +#232391 = AXIS2_PLACEMENT_3D('',#232392,#232393,#232394); +#232392 = CARTESIAN_POINT('',(139.70959803934,-54.61428396065,1.585)); +#232393 = DIRECTION('',(0.,0.,-1.)); +#232394 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#232395 = ORIENTED_EDGE('',*,*,#232396,.T.); +#232396 = EDGE_CURVE('',#232388,#232397,#232399,.T.); +#232397 = VERTEX_POINT('',#232398); +#232398 = CARTESIAN_POINT('',(139.644597,-54.185713,1.585)); +#232399 = LINE('',#232400,#232401); +#232400 = CARTESIAN_POINT('',(139.644597,-54.614285,1.585)); +#232401 = VECTOR('',#232402,1.); +#232402 = DIRECTION('',(0.,1.,0.)); +#232403 = ORIENTED_EDGE('',*,*,#232404,.T.); +#232404 = EDGE_CURVE('',#232397,#232286,#232405,.T.); +#232405 = LINE('',#232406,#232407); +#232406 = CARTESIAN_POINT('',(139.644597,-54.185713,1.585)); +#232407 = VECTOR('',#232408,1.); +#232408 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#232409 = PLANE('',#232410); +#232410 = AXIS2_PLACEMENT_3D('',#232411,#232412,#232413); +#232411 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232412 = DIRECTION('',(0.,0.,1.)); +#232413 = DIRECTION('',(1.,0.,-0.)); +#232414 = SHELL_BASED_SURFACE_MODEL('',(#232415)); +#232415 = OPEN_SHELL('',(#232416)); +#232416 = ADVANCED_FACE('',(#232417),#232603,.T.); +#232417 = FACE_BOUND('',#232418,.F.); +#232418 = EDGE_LOOP('',(#232419,#232430,#232438,#232446,#232454,#232462, + #232471,#232479,#232488,#232496,#232505,#232513,#232522,#232530, + #232538,#232546,#232555,#232563,#232571,#232580,#232588,#232597)); +#232419 = ORIENTED_EDGE('',*,*,#232420,.T.); +#232420 = EDGE_CURVE('',#232421,#232423,#232425,.T.); +#232421 = VERTEX_POINT('',#232422); +#232422 = CARTESIAN_POINT('',(150.160369,-54.213914,1.585)); +#232423 = VERTEX_POINT('',#232424); +#232424 = CARTESIAN_POINT('',(150.379225,-53.995057,1.585)); +#232425 = CIRCLE('',#232426,0.308109459502); +#232426 = AXIS2_PLACEMENT_3D('',#232427,#232428,#232429); +#232427 = CARTESIAN_POINT('',(150.45818845359,-54.29287609279,1.585)); +#232428 = DIRECTION('',(0.,0.,-1.)); +#232429 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#232430 = ORIENTED_EDGE('',*,*,#232431,.T.); +#232431 = EDGE_CURVE('',#232423,#232432,#232434,.T.); +#232432 = VERTEX_POINT('',#232433); +#232433 = CARTESIAN_POINT('',(150.611361,-53.992777,1.585)); +#232434 = LINE('',#232435,#232436); +#232435 = CARTESIAN_POINT('',(150.379225,-53.995057,1.585)); +#232436 = VECTOR('',#232437,1.); +#232437 = DIRECTION('',(0.999951769331,9.821354869909E-03,0.)); +#232438 = ORIENTED_EDGE('',*,*,#232439,.T.); +#232439 = EDGE_CURVE('',#232432,#232440,#232442,.T.); +#232440 = VERTEX_POINT('',#232441); +#232441 = CARTESIAN_POINT('',(150.637237,-53.999004,1.585)); +#232442 = LINE('',#232443,#232444); +#232443 = CARTESIAN_POINT('',(150.611361,-53.992777,1.585)); +#232444 = VECTOR('',#232445,1.); +#232445 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#232446 = ORIENTED_EDGE('',*,*,#232447,.T.); +#232447 = EDGE_CURVE('',#232440,#232448,#232450,.T.); +#232448 = VERTEX_POINT('',#232449); +#232449 = CARTESIAN_POINT('',(150.739844,-54.054037,1.585)); +#232450 = LINE('',#232451,#232452); +#232451 = CARTESIAN_POINT('',(150.637237,-53.999004,1.585)); +#232452 = VECTOR('',#232453,1.); +#232453 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#232454 = ORIENTED_EDGE('',*,*,#232455,.T.); +#232455 = EDGE_CURVE('',#232448,#232456,#232458,.T.); +#232456 = VERTEX_POINT('',#232457); +#232457 = CARTESIAN_POINT('',(150.794878,-54.113788,1.585)); +#232458 = LINE('',#232459,#232460); +#232459 = CARTESIAN_POINT('',(150.739844,-54.054037,1.585)); +#232460 = VECTOR('',#232461,1.); +#232461 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#232462 = ORIENTED_EDGE('',*,*,#232463,.T.); +#232463 = EDGE_CURVE('',#232456,#232464,#232466,.T.); +#232464 = VERTEX_POINT('',#232465); +#232465 = CARTESIAN_POINT('',(150.788491,-54.608725,1.585)); +#232466 = CIRCLE('',#232467,0.457783772261); +#232467 = AXIS2_PLACEMENT_3D('',#232468,#232469,#232470); +#232468 = CARTESIAN_POINT('',(150.40659953493,-54.35628710455,1.585)); +#232469 = DIRECTION('',(0.,0.,-1.)); +#232470 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#232471 = ORIENTED_EDGE('',*,*,#232472,.T.); +#232472 = EDGE_CURVE('',#232464,#232473,#232475,.T.); +#232473 = VERTEX_POINT('',#232474); +#232474 = CARTESIAN_POINT('',(150.739843,-54.660247,1.585)); +#232475 = LINE('',#232476,#232477); +#232476 = CARTESIAN_POINT('',(150.788491,-54.608725,1.585)); +#232477 = VECTOR('',#232478,1.); +#232478 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#232479 = ORIENTED_EDGE('',*,*,#232480,.T.); +#232480 = EDGE_CURVE('',#232473,#232481,#232483,.T.); +#232481 = VERTEX_POINT('',#232482); +#232482 = CARTESIAN_POINT('',(150.647921,-54.568323,1.585)); +#232483 = CIRCLE('',#232484,6.499937665137E-02); +#232484 = AXIS2_PLACEMENT_3D('',#232485,#232486,#232487); +#232485 = CARTESIAN_POINT('',(150.69388218097,-54.61428481902,1.585)); +#232486 = DIRECTION('',(-0.,0.,-1.)); +#232487 = DIRECTION('',(0.707096304454,-0.707117257764,-0.)); +#232488 = ORIENTED_EDGE('',*,*,#232489,.T.); +#232489 = EDGE_CURVE('',#232481,#232490,#232492,.T.); +#232490 = VERTEX_POINT('',#232491); +#232491 = CARTESIAN_POINT('',(150.683319,-54.532925,1.585)); +#232492 = LINE('',#232493,#232494); +#232493 = CARTESIAN_POINT('',(150.647921,-54.568323,1.585)); +#232494 = VECTOR('',#232495,1.); +#232495 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#232496 = ORIENTED_EDGE('',*,*,#232497,.T.); +#232497 = EDGE_CURVE('',#232490,#232498,#232500,.T.); +#232498 = VERTEX_POINT('',#232499); +#232499 = CARTESIAN_POINT('',(150.683319,-54.18136,1.585)); +#232500 = CIRCLE('',#232501,0.325008683278); +#232501 = AXIS2_PLACEMENT_3D('',#232502,#232503,#232504); +#232502 = CARTESIAN_POINT('',(150.409949,-54.3571425,1.585)); +#232503 = DIRECTION('',(0.,-0.,1.)); +#232504 = DIRECTION('',(0.841115988787,-0.54085478033,-0.)); +#232505 = ORIENTED_EDGE('',*,*,#232506,.T.); +#232506 = EDGE_CURVE('',#232498,#232507,#232509,.T.); +#232507 = VERTEX_POINT('',#232508); +#232508 = CARTESIAN_POINT('',(150.655379,-54.15342,1.585)); +#232509 = LINE('',#232510,#232511); +#232510 = CARTESIAN_POINT('',(150.683319,-54.18136,1.585)); +#232511 = VECTOR('',#232512,1.); +#232512 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232513 = ORIENTED_EDGE('',*,*,#232514,.T.); +#232514 = EDGE_CURVE('',#232507,#232515,#232517,.T.); +#232515 = VERTEX_POINT('',#232516); +#232516 = CARTESIAN_POINT('',(150.346671,-54.15342,1.585)); +#232517 = CIRCLE('',#232518,0.277419178293); +#232518 = AXIS2_PLACEMENT_3D('',#232519,#232520,#232521); +#232519 = CARTESIAN_POINT('',(150.501025,-54.383933,1.585)); +#232520 = DIRECTION('',(0.,0.,1.)); +#232521 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#232522 = ORIENTED_EDGE('',*,*,#232523,.T.); +#232523 = EDGE_CURVE('',#232515,#232524,#232526,.T.); +#232524 = VERTEX_POINT('',#232525); +#232525 = CARTESIAN_POINT('',(150.318733,-54.181358,1.585)); +#232526 = LINE('',#232527,#232528); +#232527 = CARTESIAN_POINT('',(150.346671,-54.15342,1.585)); +#232528 = VECTOR('',#232529,1.); +#232529 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#232530 = ORIENTED_EDGE('',*,*,#232531,.T.); +#232531 = EDGE_CURVE('',#232524,#232532,#232534,.T.); +#232532 = VERTEX_POINT('',#232533); +#232533 = CARTESIAN_POINT('',(150.287454,-54.243916,1.585)); +#232534 = LINE('',#232535,#232536); +#232535 = CARTESIAN_POINT('',(150.318733,-54.181358,1.585)); +#232536 = VECTOR('',#232537,1.); +#232537 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#232538 = ORIENTED_EDGE('',*,*,#232539,.T.); +#232539 = EDGE_CURVE('',#232532,#232540,#232542,.T.); +#232540 = VERTEX_POINT('',#232541); +#232541 = CARTESIAN_POINT('',(150.287454,-54.357142,1.585)); +#232542 = LINE('',#232543,#232544); +#232543 = CARTESIAN_POINT('',(150.287454,-54.243916,1.585)); +#232544 = VECTOR('',#232545,1.); +#232545 = DIRECTION('',(0.,-1.,0.)); +#232546 = ORIENTED_EDGE('',*,*,#232547,.T.); +#232547 = EDGE_CURVE('',#232540,#232548,#232550,.T.); +#232548 = VERTEX_POINT('',#232549); +#232549 = CARTESIAN_POINT('',(150.179652,-54.40606,1.585)); +#232550 = CIRCLE('',#232551,6.500010429712E-02); +#232551 = AXIS2_PLACEMENT_3D('',#232552,#232553,#232554); +#232552 = CARTESIAN_POINT('',(150.2224538957,-54.35714158544,1.585)); +#232553 = DIRECTION('',(-0.,0.,-1.)); +#232554 = DIRECTION('',(0.99999999998,-6.377788677602E-06,-0.)); +#232555 = ORIENTED_EDGE('',*,*,#232556,.T.); +#232556 = EDGE_CURVE('',#232548,#232557,#232559,.T.); +#232557 = VERTEX_POINT('',#232558); +#232558 = CARTESIAN_POINT('',(149.944597,-54.200386,1.585)); +#232559 = LINE('',#232560,#232561); +#232560 = CARTESIAN_POINT('',(150.179652,-54.40606,1.585)); +#232561 = VECTOR('',#232562,1.); +#232562 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#232563 = ORIENTED_EDGE('',*,*,#232564,.T.); +#232564 = EDGE_CURVE('',#232557,#232565,#232567,.T.); +#232565 = VERTEX_POINT('',#232566); +#232566 = CARTESIAN_POINT('',(149.944597,-54.614285,1.585)); +#232567 = LINE('',#232568,#232569); +#232568 = CARTESIAN_POINT('',(149.944597,-54.200386,1.585)); +#232569 = VECTOR('',#232570,1.); +#232570 = DIRECTION('',(0.,-1.,0.)); +#232571 = ORIENTED_EDGE('',*,*,#232572,.T.); +#232572 = EDGE_CURVE('',#232565,#232573,#232575,.T.); +#232573 = VERTEX_POINT('',#232574); +#232574 = CARTESIAN_POINT('',(149.814597,-54.614285,1.585)); +#232575 = CIRCLE('',#232576,6.500000000091E-02); +#232576 = AXIS2_PLACEMENT_3D('',#232577,#232578,#232579); +#232577 = CARTESIAN_POINT('',(149.879597,-54.61428465513,1.585)); +#232578 = DIRECTION('',(-0.,0.,-1.)); +#232579 = DIRECTION('',(0.999999999986,-5.305658134983E-06,-0.)); +#232580 = ORIENTED_EDGE('',*,*,#232581,.T.); +#232581 = EDGE_CURVE('',#232573,#232582,#232584,.T.); +#232582 = VERTEX_POINT('',#232583); +#232583 = CARTESIAN_POINT('',(149.814597,-54.057142,1.585)); +#232584 = LINE('',#232585,#232586); +#232585 = CARTESIAN_POINT('',(149.814597,-54.614285,1.585)); +#232586 = VECTOR('',#232587,1.); +#232587 = DIRECTION('',(0.,1.,0.)); +#232588 = ORIENTED_EDGE('',*,*,#232589,.T.); +#232589 = EDGE_CURVE('',#232582,#232590,#232592,.T.); +#232590 = VERTEX_POINT('',#232591); +#232591 = CARTESIAN_POINT('',(149.9224,-54.008225,1.585)); +#232592 = CIRCLE('',#232593,6.500002288386E-02); +#232593 = AXIS2_PLACEMENT_3D('',#232594,#232595,#232596); +#232594 = CARTESIAN_POINT('',(149.87959702288,-54.05714236015,1.585)); +#232595 = DIRECTION('',(0.,0.,-1.)); +#232596 = DIRECTION('',(-0.999999999985,5.540887915866E-06,0.)); +#232597 = ORIENTED_EDGE('',*,*,#232598,.T.); +#232598 = EDGE_CURVE('',#232590,#232421,#232599,.T.); +#232599 = LINE('',#232600,#232601); +#232600 = CARTESIAN_POINT('',(149.9224,-54.008225,1.585)); +#232601 = VECTOR('',#232602,1.); +#232602 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#232603 = PLANE('',#232604); +#232604 = AXIS2_PLACEMENT_3D('',#232605,#232606,#232607); +#232605 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232606 = DIRECTION('',(0.,0.,1.)); +#232607 = DIRECTION('',(1.,0.,-0.)); +#232608 = SHELL_BASED_SURFACE_MODEL('',(#232609)); +#232609 = OPEN_SHELL('',(#232610)); +#232610 = ADVANCED_FACE('',(#232611),#232852,.T.); +#232611 = FACE_BOUND('',#232612,.F.); +#232612 = EDGE_LOOP('',(#232613,#232624,#232632,#232640,#232648,#232656, + #232665,#232673,#232682,#232690,#232698,#232706,#232714,#232722, + #232730,#232739,#232747,#232755,#232763,#232771,#232780,#232788, + #232796,#232804,#232813,#232821,#232829,#232837,#232846)); +#232613 = ORIENTED_EDGE('',*,*,#232614,.T.); +#232614 = EDGE_CURVE('',#232615,#232617,#232619,.T.); +#232615 = VERTEX_POINT('',#232616); +#232616 = CARTESIAN_POINT('',(124.928882,-53.999999,1.585)); +#232617 = VERTEX_POINT('',#232618); +#232618 = CARTESIAN_POINT('',(124.993882,-53.934999,1.585)); +#232619 = CIRCLE('',#232620,6.500103935387E-02); +#232620 = AXIS2_PLACEMENT_3D('',#232621,#232622,#232623); +#232621 = CARTESIAN_POINT('',(124.99388303934,-54.00000003934,1.585)); +#232622 = DIRECTION('',(0.,0.,-1.)); +#232623 = DIRECTION('',(-0.999999999872,1.598967616426E-05,0.)); +#232624 = ORIENTED_EDGE('',*,*,#232625,.T.); +#232625 = EDGE_CURVE('',#232617,#232626,#232628,.T.); +#232626 = VERTEX_POINT('',#232627); +#232627 = CARTESIAN_POINT('',(125.293882,-53.934999,1.585)); +#232628 = LINE('',#232629,#232630); +#232629 = CARTESIAN_POINT('',(124.993882,-53.934999,1.585)); +#232630 = VECTOR('',#232631,1.); +#232631 = DIRECTION('',(1.,0.,0.)); +#232632 = ORIENTED_EDGE('',*,*,#232633,.T.); +#232633 = EDGE_CURVE('',#232626,#232634,#232636,.T.); +#232634 = VERTEX_POINT('',#232635); +#232635 = CARTESIAN_POINT('',(125.318756,-53.939947,1.585)); +#232636 = LINE('',#232637,#232638); +#232637 = CARTESIAN_POINT('',(125.293882,-53.934999,1.585)); +#232638 = VECTOR('',#232639,1.); +#232639 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#232640 = ORIENTED_EDGE('',*,*,#232641,.T.); +#232641 = EDGE_CURVE('',#232634,#232642,#232644,.T.); +#232642 = VERTEX_POINT('',#232643); +#232643 = CARTESIAN_POINT('',(125.339843,-53.954037,1.585)); +#232644 = LINE('',#232645,#232646); +#232645 = CARTESIAN_POINT('',(125.318756,-53.939947,1.585)); +#232646 = VECTOR('',#232647,1.); +#232647 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#232648 = ORIENTED_EDGE('',*,*,#232649,.T.); +#232649 = EDGE_CURVE('',#232642,#232650,#232652,.T.); +#232650 = VERTEX_POINT('',#232651); +#232651 = CARTESIAN_POINT('',(125.391003,-54.009318,1.585)); +#232652 = LINE('',#232653,#232654); +#232653 = CARTESIAN_POINT('',(125.339843,-53.954037,1.585)); +#232654 = VECTOR('',#232655,1.); +#232655 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#232656 = ORIENTED_EDGE('',*,*,#232657,.T.); +#232657 = EDGE_CURVE('',#232650,#232658,#232660,.T.); +#232658 = VERTEX_POINT('',#232659); +#232659 = CARTESIAN_POINT('',(125.390999,-54.419256,1.585)); +#232660 = CIRCLE('',#232661,0.409312568567); +#232661 = AXIS2_PLACEMENT_3D('',#232662,#232663,#232664); +#232662 = CARTESIAN_POINT('',(125.03670664807,-54.21428354294,1.585)); +#232663 = DIRECTION('',(0.,0.,-1.)); +#232664 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#232665 = ORIENTED_EDGE('',*,*,#232666,.T.); +#232666 = EDGE_CURVE('',#232658,#232667,#232669,.T.); +#232667 = VERTEX_POINT('',#232668); +#232668 = CARTESIAN_POINT('',(125.288322,-54.523179,1.585)); +#232669 = LINE('',#232670,#232671); +#232670 = CARTESIAN_POINT('',(125.390999,-54.419256,1.585)); +#232671 = VECTOR('',#232672,1.); +#232672 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#232673 = ORIENTED_EDGE('',*,*,#232674,.T.); +#232674 = EDGE_CURVE('',#232667,#232675,#232677,.T.); +#232675 = VERTEX_POINT('',#232676); +#232676 = CARTESIAN_POINT('',(124.849546,-54.620201,1.585)); +#232677 = CIRCLE('',#232678,0.675422176574); +#232678 = AXIS2_PLACEMENT_3D('',#232679,#232680,#232681); +#232679 = CARTESIAN_POINT('',(124.93141275007,-53.94975864465,1.585)); +#232680 = DIRECTION('',(0.,0.,-1.)); +#232681 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#232682 = ORIENTED_EDGE('',*,*,#232683,.T.); +#232683 = EDGE_CURVE('',#232675,#232684,#232686,.T.); +#232684 = VERTEX_POINT('',#232685); +#232685 = CARTESIAN_POINT('',(124.664813,-54.572423,1.585)); +#232686 = LINE('',#232687,#232688); +#232687 = CARTESIAN_POINT('',(124.849546,-54.620201,1.585)); +#232688 = VECTOR('',#232689,1.); +#232689 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#232690 = ORIENTED_EDGE('',*,*,#232691,.T.); +#232691 = EDGE_CURVE('',#232684,#232692,#232694,.T.); +#232692 = VERTEX_POINT('',#232693); +#232693 = CARTESIAN_POINT('',(124.562206,-54.51739,1.585)); +#232694 = LINE('',#232695,#232696); +#232695 = CARTESIAN_POINT('',(124.664813,-54.572423,1.585)); +#232696 = VECTOR('',#232697,1.); +#232697 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#232698 = ORIENTED_EDGE('',*,*,#232699,.T.); +#232699 = EDGE_CURVE('',#232692,#232700,#232702,.T.); +#232700 = VERTEX_POINT('',#232701); +#232701 = CARTESIAN_POINT('',(124.468191,-54.419252,1.585)); +#232702 = LINE('',#232703,#232704); +#232703 = CARTESIAN_POINT('',(124.562206,-54.51739,1.585)); +#232704 = VECTOR('',#232705,1.); +#232705 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#232706 = ORIENTED_EDGE('',*,*,#232707,.T.); +#232707 = EDGE_CURVE('',#232700,#232708,#232710,.T.); +#232708 = VERTEX_POINT('',#232709); +#232709 = CARTESIAN_POINT('',(124.41663,-54.267364,1.585)); +#232710 = LINE('',#232711,#232712); +#232711 = CARTESIAN_POINT('',(124.468191,-54.419252,1.585)); +#232712 = VECTOR('',#232713,1.); +#232713 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#232714 = ORIENTED_EDGE('',*,*,#232715,.T.); +#232715 = EDGE_CURVE('',#232708,#232716,#232718,.T.); +#232716 = VERTEX_POINT('',#232717); +#232717 = CARTESIAN_POINT('',(124.417512,-54.113914,1.585)); +#232718 = LINE('',#232719,#232720); +#232719 = CARTESIAN_POINT('',(124.41663,-54.267364,1.585)); +#232720 = VECTOR('',#232721,1.); +#232721 = DIRECTION('',(5.747705643239E-03,0.999983481803,0.)); +#232722 = ORIENTED_EDGE('',*,*,#232723,.T.); +#232723 = EDGE_CURVE('',#232716,#232724,#232726,.T.); +#232724 = VERTEX_POINT('',#232725); +#232725 = CARTESIAN_POINT('',(124.464316,-54.013787,1.585)); +#232726 = LINE('',#232727,#232728); +#232727 = CARTESIAN_POINT('',(124.417512,-54.113914,1.585)); +#232728 = VECTOR('',#232729,1.); +#232729 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#232730 = ORIENTED_EDGE('',*,*,#232731,.T.); +#232731 = EDGE_CURVE('',#232724,#232732,#232734,.T.); +#232732 = VERTEX_POINT('',#232733); +#232733 = CARTESIAN_POINT('',(124.580592,-54.071925,1.585)); +#232734 = CIRCLE('',#232735,6.500026004258E-02); +#232735 = AXIS2_PLACEMENT_3D('',#232736,#232737,#232738); +#232736 = CARTESIAN_POINT('',(124.52245365279,-54.0428566944,1.585)); +#232737 = DIRECTION('',(0.,0.,-1.)); +#232738 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#232739 = ORIENTED_EDGE('',*,*,#232740,.T.); +#232740 = EDGE_CURVE('',#232732,#232741,#232743,.T.); +#232741 = VERTEX_POINT('',#232742); +#232742 = CARTESIAN_POINT('',(124.544597,-54.143915,1.585)); +#232743 = LINE('',#232744,#232745); +#232744 = CARTESIAN_POINT('',(124.580592,-54.071925,1.585)); +#232745 = VECTOR('',#232746,1.); +#232746 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#232747 = ORIENTED_EDGE('',*,*,#232748,.T.); +#232748 = EDGE_CURVE('',#232741,#232749,#232751,.T.); +#232749 = VERTEX_POINT('',#232750); +#232750 = CARTESIAN_POINT('',(124.544597,-54.246595,1.585)); +#232751 = LINE('',#232752,#232753); +#232752 = CARTESIAN_POINT('',(124.544597,-54.143915,1.585)); +#232753 = VECTOR('',#232754,1.); +#232754 = DIRECTION('',(0.,-1.,0.)); +#232755 = ORIENTED_EDGE('',*,*,#232756,.T.); +#232756 = EDGE_CURVE('',#232749,#232757,#232759,.T.); +#232757 = VERTEX_POINT('',#232758); +#232758 = CARTESIAN_POINT('',(124.579265,-54.3506,1.585)); +#232759 = LINE('',#232760,#232761); +#232760 = CARTESIAN_POINT('',(124.544597,-54.246595,1.585)); +#232761 = VECTOR('',#232762,1.); +#232762 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#232763 = ORIENTED_EDGE('',*,*,#232764,.T.); +#232764 = EDGE_CURVE('',#232757,#232765,#232767,.T.); +#232765 = VERTEX_POINT('',#232766); +#232766 = CARTESIAN_POINT('',(124.646669,-54.418006,1.585)); +#232767 = LINE('',#232768,#232769); +#232768 = CARTESIAN_POINT('',(124.579265,-54.3506,1.585)); +#232769 = VECTOR('',#232770,1.); +#232770 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#232771 = ORIENTED_EDGE('',*,*,#232772,.T.); +#232772 = EDGE_CURVE('',#232765,#232773,#232775,.T.); +#232773 = VERTEX_POINT('',#232774); +#232774 = CARTESIAN_POINT('',(124.985881,-54.492142,1.585)); +#232775 = CIRCLE('',#232776,0.553317785495); +#232776 = AXIS2_PLACEMENT_3D('',#232777,#232778,#232779); +#232777 = CARTESIAN_POINT('',(124.9284500839,-53.94181276979,1.585)); +#232778 = DIRECTION('',(0.,0.,1.)); +#232779 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#232780 = ORIENTED_EDGE('',*,*,#232781,.T.); +#232781 = EDGE_CURVE('',#232773,#232782,#232784,.T.); +#232782 = VERTEX_POINT('',#232783); +#232783 = CARTESIAN_POINT('',(125.142622,-54.452956,1.585)); +#232784 = LINE('',#232785,#232786); +#232785 = CARTESIAN_POINT('',(124.985881,-54.492142,1.585)); +#232786 = VECTOR('',#232787,1.); +#232787 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#232788 = ORIENTED_EDGE('',*,*,#232789,.T.); +#232789 = EDGE_CURVE('',#232782,#232790,#232792,.T.); +#232790 = VERTEX_POINT('',#232791); +#232791 = CARTESIAN_POINT('',(125.212522,-54.418007,1.585)); +#232792 = LINE('',#232793,#232794); +#232793 = CARTESIAN_POINT('',(125.142622,-54.452956,1.585)); +#232794 = VECTOR('',#232795,1.); +#232795 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#232796 = ORIENTED_EDGE('',*,*,#232797,.T.); +#232797 = EDGE_CURVE('',#232790,#232798,#232800,.T.); +#232798 = VERTEX_POINT('',#232799); +#232799 = CARTESIAN_POINT('',(125.279928,-54.3506,1.585)); +#232800 = LINE('',#232801,#232802); +#232801 = CARTESIAN_POINT('',(125.212522,-54.418007,1.585)); +#232802 = VECTOR('',#232803,1.); +#232803 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#232804 = ORIENTED_EDGE('',*,*,#232805,.T.); +#232805 = EDGE_CURVE('',#232798,#232806,#232808,.T.); +#232806 = VERTEX_POINT('',#232807); +#232807 = CARTESIAN_POINT('',(125.279928,-54.077968,1.585)); +#232808 = CIRCLE('',#232809,0.272194686174); +#232809 = AXIS2_PLACEMENT_3D('',#232810,#232811,#232812); +#232810 = CARTESIAN_POINT('',(125.04432686391,-54.214284,1.585)); +#232811 = DIRECTION('',(0.,-0.,1.)); +#232812 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#232813 = ORIENTED_EDGE('',*,*,#232814,.T.); +#232814 = EDGE_CURVE('',#232806,#232815,#232817,.T.); +#232815 = VERTEX_POINT('',#232816); +#232816 = CARTESIAN_POINT('',(125.266959,-54.064999,1.585)); +#232817 = LINE('',#232818,#232819); +#232818 = CARTESIAN_POINT('',(125.279928,-54.077968,1.585)); +#232819 = VECTOR('',#232820,1.); +#232820 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232821 = ORIENTED_EDGE('',*,*,#232822,.T.); +#232822 = EDGE_CURVE('',#232815,#232823,#232825,.T.); +#232823 = VERTEX_POINT('',#232824); +#232824 = CARTESIAN_POINT('',(125.058882,-54.064999,1.585)); +#232825 = LINE('',#232826,#232827); +#232826 = CARTESIAN_POINT('',(125.266959,-54.064999,1.585)); +#232827 = VECTOR('',#232828,1.); +#232828 = DIRECTION('',(-1.,0.,0.)); +#232829 = ORIENTED_EDGE('',*,*,#232830,.T.); +#232830 = EDGE_CURVE('',#232823,#232831,#232833,.T.); +#232831 = VERTEX_POINT('',#232832); +#232832 = CARTESIAN_POINT('',(125.058882,-54.171428,1.585)); +#232833 = LINE('',#232834,#232835); +#232834 = CARTESIAN_POINT('',(125.058882,-54.064999,1.585)); +#232835 = VECTOR('',#232836,1.); +#232836 = DIRECTION('',(0.,-1.,0.)); +#232837 = ORIENTED_EDGE('',*,*,#232838,.T.); +#232838 = EDGE_CURVE('',#232831,#232839,#232841,.T.); +#232839 = VERTEX_POINT('',#232840); +#232840 = CARTESIAN_POINT('',(124.928882,-54.171428,1.585)); +#232841 = CIRCLE('',#232842,6.500000000091E-02); +#232842 = AXIS2_PLACEMENT_3D('',#232843,#232844,#232845); +#232843 = CARTESIAN_POINT('',(124.993882,-54.17142765513,1.585)); +#232844 = DIRECTION('',(-0.,0.,-1.)); +#232845 = DIRECTION('',(0.999999999986,-5.305658134982E-06,-0.)); +#232846 = ORIENTED_EDGE('',*,*,#232847,.T.); +#232847 = EDGE_CURVE('',#232839,#232615,#232848,.T.); +#232848 = LINE('',#232849,#232850); +#232849 = CARTESIAN_POINT('',(124.928882,-54.171428,1.585)); +#232850 = VECTOR('',#232851,1.); +#232851 = DIRECTION('',(0.,1.,0.)); +#232852 = PLANE('',#232853); +#232853 = AXIS2_PLACEMENT_3D('',#232854,#232855,#232856); +#232854 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232855 = DIRECTION('',(0.,0.,1.)); +#232856 = DIRECTION('',(1.,0.,-0.)); +#232857 = SHELL_BASED_SURFACE_MODEL('',(#232858)); +#232858 = OPEN_SHELL('',(#232859)); +#232859 = ADVANCED_FACE('',(#232860),#232946,.T.); +#232860 = FACE_BOUND('',#232861,.F.); +#232861 = EDGE_LOOP('',(#232862,#232873,#232881,#232890,#232898,#232906, + #232915,#232923,#232932,#232940)); +#232862 = ORIENTED_EDGE('',*,*,#232863,.T.); +#232863 = EDGE_CURVE('',#232864,#232866,#232868,.T.); +#232864 = VERTEX_POINT('',#232865); +#232865 = CARTESIAN_POINT('',(142.259597,-54.100713,1.585)); +#232866 = VERTEX_POINT('',#232867); +#232867 = CARTESIAN_POINT('',(142.259597,-53.970713,1.585)); +#232868 = CIRCLE('',#232869,6.500000000091E-02); +#232869 = AXIS2_PLACEMENT_3D('',#232870,#232871,#232872); +#232870 = CARTESIAN_POINT('',(142.25959734486,-54.035713,1.585)); +#232871 = DIRECTION('',(0.,0.,-1.)); +#232872 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#232873 = ORIENTED_EDGE('',*,*,#232874,.T.); +#232874 = EDGE_CURVE('',#232866,#232875,#232877,.T.); +#232875 = VERTEX_POINT('',#232876); +#232876 = CARTESIAN_POINT('',(143.159597,-53.970713,1.585)); +#232877 = LINE('',#232878,#232879); +#232878 = CARTESIAN_POINT('',(142.259597,-53.970713,1.585)); +#232879 = VECTOR('',#232880,1.); +#232880 = DIRECTION('',(1.,0.,0.)); +#232881 = ORIENTED_EDGE('',*,*,#232882,.T.); +#232882 = EDGE_CURVE('',#232875,#232883,#232885,.T.); +#232883 = VERTEX_POINT('',#232884); +#232884 = CARTESIAN_POINT('',(143.191846,-54.092149,1.585)); +#232885 = CIRCLE('',#232886,6.500021194141E-02); +#232886 = AXIS2_PLACEMENT_3D('',#232887,#232888,#232889); +#232887 = CARTESIAN_POINT('',(143.15959651351,-54.03571321194,1.585)); +#232888 = DIRECTION('',(0.,0.,-1.)); +#232889 = DIRECTION('',(7.484332115464E-06,0.999999999972,0.)); +#232890 = ORIENTED_EDGE('',*,*,#232891,.T.); +#232891 = EDGE_CURVE('',#232883,#232892,#232894,.T.); +#232892 = VERTEX_POINT('',#232893); +#232893 = CARTESIAN_POINT('',(142.504359,-54.484999,1.585)); +#232894 = LINE('',#232895,#232896); +#232895 = CARTESIAN_POINT('',(143.191846,-54.092149,1.585)); +#232896 = VECTOR('',#232897,1.); +#232897 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#232898 = ORIENTED_EDGE('',*,*,#232899,.T.); +#232899 = EDGE_CURVE('',#232892,#232900,#232902,.T.); +#232900 = VERTEX_POINT('',#232901); +#232901 = CARTESIAN_POINT('',(143.159597,-54.484999,1.585)); +#232902 = LINE('',#232903,#232904); +#232903 = CARTESIAN_POINT('',(142.504359,-54.484999,1.585)); +#232904 = VECTOR('',#232905,1.); +#232905 = DIRECTION('',(1.,0.,0.)); +#232906 = ORIENTED_EDGE('',*,*,#232907,.T.); +#232907 = EDGE_CURVE('',#232900,#232908,#232910,.T.); +#232908 = VERTEX_POINT('',#232909); +#232909 = CARTESIAN_POINT('',(143.159597,-54.614999,1.585)); +#232910 = CIRCLE('',#232911,6.500000000091E-02); +#232911 = AXIS2_PLACEMENT_3D('',#232912,#232913,#232914); +#232912 = CARTESIAN_POINT('',(143.15959665513,-54.549999,1.585)); +#232913 = DIRECTION('',(0.,0.,-1.)); +#232914 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#232915 = ORIENTED_EDGE('',*,*,#232916,.T.); +#232916 = EDGE_CURVE('',#232908,#232917,#232919,.T.); +#232917 = VERTEX_POINT('',#232918); +#232918 = CARTESIAN_POINT('',(142.259597,-54.614999,1.585)); +#232919 = LINE('',#232920,#232921); +#232920 = CARTESIAN_POINT('',(143.159597,-54.614999,1.585)); +#232921 = VECTOR('',#232922,1.); +#232922 = DIRECTION('',(-1.,0.,0.)); +#232923 = ORIENTED_EDGE('',*,*,#232924,.T.); +#232924 = EDGE_CURVE('',#232917,#232925,#232927,.T.); +#232925 = VERTEX_POINT('',#232926); +#232926 = CARTESIAN_POINT('',(142.227348,-54.493563,1.585)); +#232927 = CIRCLE('',#232928,6.500021194141E-02); +#232928 = AXIS2_PLACEMENT_3D('',#232929,#232930,#232931); +#232929 = CARTESIAN_POINT('',(142.25959748648,-54.54999878806,1.585)); +#232930 = DIRECTION('',(0.,0.,-1.)); +#232931 = DIRECTION('',(-7.484332115464E-06,-0.999999999972,-0.)); +#232932 = ORIENTED_EDGE('',*,*,#232933,.T.); +#232933 = EDGE_CURVE('',#232925,#232934,#232936,.T.); +#232934 = VERTEX_POINT('',#232935); +#232935 = CARTESIAN_POINT('',(142.914835,-54.100713,1.585)); +#232936 = LINE('',#232937,#232938); +#232937 = CARTESIAN_POINT('',(142.227348,-54.493563,1.585)); +#232938 = VECTOR('',#232939,1.); +#232939 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#232940 = ORIENTED_EDGE('',*,*,#232941,.T.); +#232941 = EDGE_CURVE('',#232934,#232864,#232942,.T.); +#232942 = LINE('',#232943,#232944); +#232943 = CARTESIAN_POINT('',(142.914835,-54.100713,1.585)); +#232944 = VECTOR('',#232945,1.); +#232945 = DIRECTION('',(-1.,0.,0.)); +#232946 = PLANE('',#232947); +#232947 = AXIS2_PLACEMENT_3D('',#232948,#232949,#232950); +#232948 = CARTESIAN_POINT('',(0.,0.,1.585)); +#232949 = DIRECTION('',(0.,0.,1.)); +#232950 = DIRECTION('',(1.,0.,-0.)); +#232951 = SHELL_BASED_SURFACE_MODEL('',(#232952)); +#232952 = OPEN_SHELL('',(#232953)); +#232953 = ADVANCED_FACE('',(#232954),#233040,.T.); +#232954 = FACE_BOUND('',#232955,.F.); +#232955 = EDGE_LOOP('',(#232956,#232967,#232975,#232984,#232992,#233000, + #233009,#233017,#233026,#233034)); +#232956 = ORIENTED_EDGE('',*,*,#232957,.T.); +#232957 = EDGE_CURVE('',#232958,#232960,#232962,.T.); +#232958 = VERTEX_POINT('',#232959); +#232959 = CARTESIAN_POINT('',(116.859597,-54.079285,1.585)); +#232960 = VERTEX_POINT('',#232961); +#232961 = CARTESIAN_POINT('',(116.859597,-53.949285,1.585)); +#232962 = CIRCLE('',#232963,6.500000000091E-02); +#232963 = AXIS2_PLACEMENT_3D('',#232964,#232965,#232966); +#232964 = CARTESIAN_POINT('',(116.85959734486,-54.014285,1.585)); +#232965 = DIRECTION('',(0.,0.,-1.)); +#232966 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#232967 = ORIENTED_EDGE('',*,*,#232968,.T.); +#232968 = EDGE_CURVE('',#232960,#232969,#232971,.T.); +#232969 = VERTEX_POINT('',#232970); +#232970 = CARTESIAN_POINT('',(117.759597,-53.949285,1.585)); +#232971 = LINE('',#232972,#232973); +#232972 = CARTESIAN_POINT('',(116.859597,-53.949285,1.585)); +#232973 = VECTOR('',#232974,1.); +#232974 = DIRECTION('',(1.,0.,0.)); +#232975 = ORIENTED_EDGE('',*,*,#232976,.T.); +#232976 = EDGE_CURVE('',#232969,#232977,#232979,.T.); +#232977 = VERTEX_POINT('',#232978); +#232978 = CARTESIAN_POINT('',(117.791846,-54.070721,1.585)); +#232979 = CIRCLE('',#232980,6.500021194141E-02); +#232980 = AXIS2_PLACEMENT_3D('',#232981,#232982,#232983); +#232981 = CARTESIAN_POINT('',(117.75959651351,-54.01428521194,1.585)); +#232982 = DIRECTION('',(0.,0.,-1.)); +#232983 = DIRECTION('',(7.484332115463E-06,0.999999999972,0.)); +#232984 = ORIENTED_EDGE('',*,*,#232985,.T.); +#232985 = EDGE_CURVE('',#232977,#232986,#232988,.T.); +#232986 = VERTEX_POINT('',#232987); +#232987 = CARTESIAN_POINT('',(117.104359,-54.463571,1.585)); +#232988 = LINE('',#232989,#232990); +#232989 = CARTESIAN_POINT('',(117.791846,-54.070721,1.585)); +#232990 = VECTOR('',#232991,1.); +#232991 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#232992 = ORIENTED_EDGE('',*,*,#232993,.T.); +#232993 = EDGE_CURVE('',#232986,#232994,#232996,.T.); +#232994 = VERTEX_POINT('',#232995); +#232995 = CARTESIAN_POINT('',(117.759597,-54.463571,1.585)); +#232996 = LINE('',#232997,#232998); +#232997 = CARTESIAN_POINT('',(117.104359,-54.463571,1.585)); +#232998 = VECTOR('',#232999,1.); +#232999 = DIRECTION('',(1.,0.,0.)); +#233000 = ORIENTED_EDGE('',*,*,#233001,.T.); +#233001 = EDGE_CURVE('',#232994,#233002,#233004,.T.); +#233002 = VERTEX_POINT('',#233003); +#233003 = CARTESIAN_POINT('',(117.759597,-54.593571,1.585)); +#233004 = CIRCLE('',#233005,6.500000000091E-02); +#233005 = AXIS2_PLACEMENT_3D('',#233006,#233007,#233008); +#233006 = CARTESIAN_POINT('',(117.75959665513,-54.528571,1.585)); +#233007 = DIRECTION('',(0.,0.,-1.)); +#233008 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#233009 = ORIENTED_EDGE('',*,*,#233010,.T.); +#233010 = EDGE_CURVE('',#233002,#233011,#233013,.T.); +#233011 = VERTEX_POINT('',#233012); +#233012 = CARTESIAN_POINT('',(116.859597,-54.593571,1.585)); +#233013 = LINE('',#233014,#233015); +#233014 = CARTESIAN_POINT('',(117.759597,-54.593571,1.585)); +#233015 = VECTOR('',#233016,1.); +#233016 = DIRECTION('',(-1.,0.,0.)); +#233017 = ORIENTED_EDGE('',*,*,#233018,.T.); +#233018 = EDGE_CURVE('',#233011,#233019,#233021,.T.); +#233019 = VERTEX_POINT('',#233020); +#233020 = CARTESIAN_POINT('',(116.827348,-54.472135,1.585)); +#233021 = CIRCLE('',#233022,6.50002119414E-02); +#233022 = AXIS2_PLACEMENT_3D('',#233023,#233024,#233025); +#233023 = CARTESIAN_POINT('',(116.85959748648,-54.52857078806,1.585)); +#233024 = DIRECTION('',(0.,0.,-1.)); +#233025 = DIRECTION('',(-7.484332115464E-06,-0.999999999972,-0.)); +#233026 = ORIENTED_EDGE('',*,*,#233027,.T.); +#233027 = EDGE_CURVE('',#233019,#233028,#233030,.T.); +#233028 = VERTEX_POINT('',#233029); +#233029 = CARTESIAN_POINT('',(117.514835,-54.079285,1.585)); +#233030 = LINE('',#233031,#233032); +#233031 = CARTESIAN_POINT('',(116.827348,-54.472135,1.585)); +#233032 = VECTOR('',#233033,1.); +#233033 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#233034 = ORIENTED_EDGE('',*,*,#233035,.T.); +#233035 = EDGE_CURVE('',#233028,#232958,#233036,.T.); +#233036 = LINE('',#233037,#233038); +#233037 = CARTESIAN_POINT('',(117.514835,-54.079285,1.585)); +#233038 = VECTOR('',#233039,1.); +#233039 = DIRECTION('',(-1.,0.,0.)); +#233040 = PLANE('',#233041); +#233041 = AXIS2_PLACEMENT_3D('',#233042,#233043,#233044); +#233042 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233043 = DIRECTION('',(0.,0.,1.)); +#233044 = DIRECTION('',(1.,0.,-0.)); +#233045 = SHELL_BASED_SURFACE_MODEL('',(#233046)); +#233046 = OPEN_SHELL('',(#233047)); +#233047 = ADVANCED_FACE('',(#233048,#233174,#233241),#233308,.T.); +#233048 = FACE_BOUND('',#233049,.F.); +#233049 = EDGE_LOOP('',(#233050,#233061,#233069,#233077,#233085,#233093, + #233102,#233110,#233119,#233127,#233136,#233144,#233152,#233160, + #233168)); +#233050 = ORIENTED_EDGE('',*,*,#233051,.T.); +#233051 = EDGE_CURVE('',#233052,#233054,#233056,.T.); +#233052 = VERTEX_POINT('',#233053); +#233053 = CARTESIAN_POINT('',(119.894813,-53.984718,1.585)); +#233054 = VERTEX_POINT('',#233055); +#233055 = CARTESIAN_POINT('',(120.167237,-53.941861,1.585)); +#233056 = CIRCLE('',#233057,0.328851911789); +#233057 = AXIS2_PLACEMENT_3D('',#233058,#233059,#233060); +#233058 = CARTESIAN_POINT('',(120.07742108589,-54.25820998681,1.585)); +#233059 = DIRECTION('',(0.,0.,-1.)); +#233060 = DIRECTION('',(-0.55528971962,0.831656976935,0.)); +#233061 = ORIENTED_EDGE('',*,*,#233062,.T.); +#233062 = EDGE_CURVE('',#233054,#233063,#233065,.T.); +#233063 = VERTEX_POINT('',#233064); +#233064 = CARTESIAN_POINT('',(120.269843,-53.996894,1.585)); +#233065 = LINE('',#233066,#233067); +#233066 = CARTESIAN_POINT('',(120.167237,-53.941861,1.585)); +#233067 = VECTOR('',#233068,1.); +#233068 = DIRECTION('',(0.881245695739,-0.47265846416,0.)); +#233069 = ORIENTED_EDGE('',*,*,#233070,.T.); +#233070 = EDGE_CURVE('',#233063,#233071,#233073,.T.); +#233071 = VERTEX_POINT('',#233072); +#233072 = CARTESIAN_POINT('',(120.324878,-54.056644,1.585)); +#233073 = LINE('',#233074,#233075); +#233074 = CARTESIAN_POINT('',(120.269843,-53.996894,1.585)); +#233075 = VECTOR('',#233076,1.); +#233076 = DIRECTION('',(0.677489775945,-0.735532190655,0.)); +#233077 = ORIENTED_EDGE('',*,*,#233078,.T.); +#233078 = EDGE_CURVE('',#233071,#233079,#233081,.T.); +#233079 = VERTEX_POINT('',#233080); +#233080 = CARTESIAN_POINT('',(120.371681,-54.156771,1.585)); +#233081 = LINE('',#233082,#233083); +#233082 = CARTESIAN_POINT('',(120.324878,-54.056644,1.585)); +#233083 = VECTOR('',#233084,1.); +#233084 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#233085 = ORIENTED_EDGE('',*,*,#233086,.T.); +#233086 = EDGE_CURVE('',#233079,#233087,#233089,.T.); +#233087 = VERTEX_POINT('',#233088); +#233088 = CARTESIAN_POINT('',(120.374597,-54.514285,1.585)); +#233089 = LINE('',#233090,#233091); +#233090 = CARTESIAN_POINT('',(120.371681,-54.156771,1.585)); +#233091 = VECTOR('',#233092,1.); +#233092 = DIRECTION('',(8.156052659431E-03,-0.999966738849,0.)); +#233093 = ORIENTED_EDGE('',*,*,#233094,.T.); +#233094 = EDGE_CURVE('',#233087,#233095,#233097,.T.); +#233095 = VERTEX_POINT('',#233096); +#233096 = CARTESIAN_POINT('',(120.309597,-54.579285,1.585)); +#233097 = CIRCLE('',#233098,6.500103935389E-02); +#233098 = AXIS2_PLACEMENT_3D('',#233099,#233100,#233101); +#233099 = CARTESIAN_POINT('',(120.30959596065,-54.51428396065,1.585)); +#233100 = DIRECTION('',(0.,0.,-1.)); +#233101 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#233102 = ORIENTED_EDGE('',*,*,#233103,.T.); +#233103 = EDGE_CURVE('',#233095,#233104,#233106,.T.); +#233104 = VERTEX_POINT('',#233105); +#233105 = CARTESIAN_POINT('',(119.409597,-54.579285,1.585)); +#233106 = LINE('',#233107,#233108); +#233107 = CARTESIAN_POINT('',(120.309597,-54.579285,1.585)); +#233108 = VECTOR('',#233109,1.); +#233109 = DIRECTION('',(-1.,0.,0.)); +#233110 = ORIENTED_EDGE('',*,*,#233111,.T.); +#233111 = EDGE_CURVE('',#233104,#233112,#233114,.T.); +#233112 = VERTEX_POINT('',#233113); +#233113 = CARTESIAN_POINT('',(119.344597,-54.514285,1.585)); +#233114 = CIRCLE('',#233115,6.500103935389E-02); +#233115 = AXIS2_PLACEMENT_3D('',#233116,#233117,#233118); +#233116 = CARTESIAN_POINT('',(119.40959803934,-54.51428396065,1.585)); +#233117 = DIRECTION('',(0.,0.,-1.)); +#233118 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#233119 = ORIENTED_EDGE('',*,*,#233120,.T.); +#233120 = EDGE_CURVE('',#233112,#233121,#233123,.T.); +#233121 = VERTEX_POINT('',#233122); +#233122 = CARTESIAN_POINT('',(119.347512,-54.199628,1.585)); +#233123 = LINE('',#233124,#233125); +#233124 = CARTESIAN_POINT('',(119.344597,-54.514285,1.585)); +#233125 = VECTOR('',#233126,1.); +#233126 = DIRECTION('',(9.263658273689E-03,0.999957091397,0.)); +#233127 = ORIENTED_EDGE('',*,*,#233128,.T.); +#233128 = EDGE_CURVE('',#233121,#233129,#233131,.T.); +#233129 = VERTEX_POINT('',#233130); +#233130 = CARTESIAN_POINT('',(119.566368,-53.980771,1.585)); +#233131 = CIRCLE('',#233132,0.308109459502); +#233132 = AXIS2_PLACEMENT_3D('',#233133,#233134,#233135); +#233133 = CARTESIAN_POINT('',(119.64533145359,-54.27859009279,1.585)); +#233134 = DIRECTION('',(0.,0.,-1.)); +#233135 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#233136 = ORIENTED_EDGE('',*,*,#233137,.T.); +#233137 = EDGE_CURVE('',#233129,#233138,#233140,.T.); +#233138 = VERTEX_POINT('',#233139); +#233139 = CARTESIAN_POINT('',(119.681396,-53.980771,1.585)); +#233140 = LINE('',#233141,#233142); +#233141 = CARTESIAN_POINT('',(119.566368,-53.980771,1.585)); +#233142 = VECTOR('',#233143,1.); +#233143 = DIRECTION('',(1.,0.,0.)); +#233144 = ORIENTED_EDGE('',*,*,#233145,.T.); +#233145 = EDGE_CURVE('',#233138,#233146,#233148,.T.); +#233146 = VERTEX_POINT('',#233147); +#233147 = CARTESIAN_POINT('',(119.789761,-54.033968,1.585)); +#233148 = LINE('',#233149,#233150); +#233149 = CARTESIAN_POINT('',(119.681396,-53.980771,1.585)); +#233150 = VECTOR('',#233151,1.); +#233151 = DIRECTION('',(0.897668802148,-0.440670763326,0.)); +#233152 = ORIENTED_EDGE('',*,*,#233153,.T.); +#233153 = EDGE_CURVE('',#233146,#233154,#233156,.T.); +#233154 = VERTEX_POINT('',#233155); +#233155 = CARTESIAN_POINT('',(119.820973,-54.060838,1.585)); +#233156 = LINE('',#233157,#233158); +#233157 = CARTESIAN_POINT('',(119.789761,-54.033968,1.585)); +#233158 = VECTOR('',#233159,1.); +#233159 = DIRECTION('',(0.7578528376,-0.65242553333,0.)); +#233160 = ORIENTED_EDGE('',*,*,#233161,.T.); +#233161 = EDGE_CURVE('',#233154,#233162,#233164,.T.); +#233162 = VERTEX_POINT('',#233163); +#233163 = CARTESIAN_POINT('',(119.835063,-54.039751,1.585)); +#233164 = LINE('',#233165,#233166); +#233165 = CARTESIAN_POINT('',(119.820973,-54.060838,1.585)); +#233166 = VECTOR('',#233167,1.); +#233167 = DIRECTION('',(0.555573424112,0.831467480074,0.)); +#233168 = ORIENTED_EDGE('',*,*,#233169,.T.); +#233169 = EDGE_CURVE('',#233162,#233052,#233170,.T.); +#233170 = LINE('',#233171,#233172); +#233171 = CARTESIAN_POINT('',(119.835063,-54.039751,1.585)); +#233172 = VECTOR('',#233173,1.); +#233173 = DIRECTION('',(0.735544459429,0.677476455829,0.)); +#233174 = FACE_BOUND('',#233175,.F.); +#233175 = EDGE_LOOP('',(#233176,#233187,#233195,#233203,#233211,#233219, + #233227,#233235)); +#233176 = ORIENTED_EDGE('',*,*,#233177,.T.); +#233177 = EDGE_CURVE('',#233178,#233180,#233182,.T.); +#233178 = VERTEX_POINT('',#233179); +#233179 = CARTESIAN_POINT('',(119.713952,-54.139134,1.585)); +#233180 = VERTEX_POINT('',#233181); +#233181 = CARTESIAN_POINT('',(119.533814,-54.139134,1.585)); +#233182 = CIRCLE('',#233183,0.136032349131); +#233183 = AXIS2_PLACEMENT_3D('',#233184,#233185,#233186); +#233184 = CARTESIAN_POINT('',(119.623883,-54.241077,1.585)); +#233185 = DIRECTION('',(0.,0.,1.)); +#233186 = DIRECTION('',(0.662114567422,0.749402628503,-0.)); +#233187 = ORIENTED_EDGE('',*,*,#233188,.T.); +#233188 = EDGE_CURVE('',#233180,#233189,#233191,.T.); +#233189 = VERTEX_POINT('',#233190); +#233190 = CARTESIAN_POINT('',(119.505876,-54.167072,1.585)); +#233191 = LINE('',#233192,#233193); +#233192 = CARTESIAN_POINT('',(119.533814,-54.139134,1.585)); +#233193 = VECTOR('',#233194,1.); +#233194 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#233195 = ORIENTED_EDGE('',*,*,#233196,.T.); +#233196 = EDGE_CURVE('',#233189,#233197,#233199,.T.); +#233197 = VERTEX_POINT('',#233198); +#233198 = CARTESIAN_POINT('',(119.474597,-54.22963,1.585)); +#233199 = LINE('',#233200,#233201); +#233200 = CARTESIAN_POINT('',(119.505876,-54.167072,1.585)); +#233201 = VECTOR('',#233202,1.); +#233202 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#233203 = ORIENTED_EDGE('',*,*,#233204,.T.); +#233204 = EDGE_CURVE('',#233197,#233205,#233207,.T.); +#233205 = VERTEX_POINT('',#233206); +#233206 = CARTESIAN_POINT('',(119.474597,-54.449285,1.585)); +#233207 = LINE('',#233208,#233209); +#233208 = CARTESIAN_POINT('',(119.474597,-54.22963,1.585)); +#233209 = VECTOR('',#233210,1.); +#233210 = DIRECTION('',(0.,-1.,0.)); +#233211 = ORIENTED_EDGE('',*,*,#233212,.T.); +#233212 = EDGE_CURVE('',#233205,#233213,#233215,.T.); +#233213 = VERTEX_POINT('',#233214); +#233214 = CARTESIAN_POINT('',(119.773168,-54.449285,1.585)); +#233215 = LINE('',#233216,#233217); +#233216 = CARTESIAN_POINT('',(119.474597,-54.449285,1.585)); +#233217 = VECTOR('',#233218,1.); +#233218 = DIRECTION('',(1.,0.,0.)); +#233219 = ORIENTED_EDGE('',*,*,#233220,.T.); +#233220 = EDGE_CURVE('',#233213,#233221,#233223,.T.); +#233221 = VERTEX_POINT('',#233222); +#233222 = CARTESIAN_POINT('',(119.773168,-54.22963,1.585)); +#233223 = LINE('',#233224,#233225); +#233224 = CARTESIAN_POINT('',(119.773168,-54.449285,1.585)); +#233225 = VECTOR('',#233226,1.); +#233226 = DIRECTION('',(0.,1.,0.)); +#233227 = ORIENTED_EDGE('',*,*,#233228,.T.); +#233228 = EDGE_CURVE('',#233221,#233229,#233231,.T.); +#233229 = VERTEX_POINT('',#233230); +#233230 = CARTESIAN_POINT('',(119.741889,-54.167073,1.585)); +#233231 = LINE('',#233232,#233233); +#233232 = CARTESIAN_POINT('',(119.773168,-54.22963,1.585)); +#233233 = VECTOR('',#233234,1.); +#233234 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#233235 = ORIENTED_EDGE('',*,*,#233236,.T.); +#233236 = EDGE_CURVE('',#233229,#233178,#233237,.T.); +#233237 = LINE('',#233238,#233239); +#233238 = CARTESIAN_POINT('',(119.741889,-54.167073,1.585)); +#233239 = VECTOR('',#233240,1.); +#233240 = DIRECTION('',(-0.707081470877,0.707132090591,0.)); +#233241 = FACE_BOUND('',#233242,.F.); +#233242 = EDGE_LOOP('',(#233243,#233254,#233262,#233270,#233278,#233286, + #233294,#233302)); +#233243 = ORIENTED_EDGE('',*,*,#233244,.T.); +#233244 = EDGE_CURVE('',#233245,#233247,#233249,.T.); +#233245 = VERTEX_POINT('',#233246); +#233246 = CARTESIAN_POINT('',(120.185381,-54.096278,1.585)); +#233247 = VERTEX_POINT('',#233248); +#233248 = CARTESIAN_POINT('',(119.962384,-54.096277,1.585)); +#233249 = CIRCLE('',#233250,0.182756450193); +#233250 = AXIS2_PLACEMENT_3D('',#233251,#233252,#233253); +#233251 = CARTESIAN_POINT('',(120.07388185064,-54.2410808307,1.585)); +#233252 = DIRECTION('',(0.,0.,1.)); +#233253 = DIRECTION('',(0.610096930824,0.792326785487,-0.)); +#233254 = ORIENTED_EDGE('',*,*,#233255,.T.); +#233255 = EDGE_CURVE('',#233247,#233256,#233258,.T.); +#233256 = VERTEX_POINT('',#233257); +#233257 = CARTESIAN_POINT('',(119.937837,-54.120824,1.585)); +#233258 = LINE('',#233259,#233260); +#233259 = CARTESIAN_POINT('',(119.962384,-54.096277,1.585)); +#233260 = VECTOR('',#233261,1.); +#233261 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#233262 = ORIENTED_EDGE('',*,*,#233263,.T.); +#233263 = EDGE_CURVE('',#233256,#233264,#233266,.T.); +#233264 = VERTEX_POINT('',#233265); +#233265 = CARTESIAN_POINT('',(119.903168,-54.224832,1.585)); +#233266 = LINE('',#233267,#233268); +#233267 = CARTESIAN_POINT('',(119.937837,-54.120824,1.585)); +#233268 = VECTOR('',#233269,1.); +#233269 = DIRECTION('',(-0.316225029637,-0.948684210173,0.)); +#233270 = ORIENTED_EDGE('',*,*,#233271,.T.); +#233271 = EDGE_CURVE('',#233264,#233272,#233274,.T.); +#233272 = VERTEX_POINT('',#233273); +#233273 = CARTESIAN_POINT('',(119.903168,-54.449285,1.585)); +#233274 = LINE('',#233275,#233276); +#233275 = CARTESIAN_POINT('',(119.903168,-54.224832,1.585)); +#233276 = VECTOR('',#233277,1.); +#233277 = DIRECTION('',(0.,-1.,0.)); +#233278 = ORIENTED_EDGE('',*,*,#233279,.T.); +#233279 = EDGE_CURVE('',#233272,#233280,#233282,.T.); +#233280 = VERTEX_POINT('',#233281); +#233281 = CARTESIAN_POINT('',(120.244597,-54.449285,1.585)); +#233282 = LINE('',#233283,#233284); +#233283 = CARTESIAN_POINT('',(119.903168,-54.449285,1.585)); +#233284 = VECTOR('',#233285,1.); +#233285 = DIRECTION('',(1.,0.,0.)); +#233286 = ORIENTED_EDGE('',*,*,#233287,.T.); +#233287 = EDGE_CURVE('',#233280,#233288,#233290,.T.); +#233288 = VERTEX_POINT('',#233289); +#233289 = CARTESIAN_POINT('',(120.244597,-54.186772,1.585)); +#233290 = LINE('',#233291,#233292); +#233291 = CARTESIAN_POINT('',(120.244597,-54.449285,1.585)); +#233292 = VECTOR('',#233293,1.); +#233293 = DIRECTION('',(0.,1.,0.)); +#233294 = ORIENTED_EDGE('',*,*,#233295,.T.); +#233295 = EDGE_CURVE('',#233288,#233296,#233298,.T.); +#233296 = VERTEX_POINT('',#233297); +#233297 = CARTESIAN_POINT('',(120.213318,-54.124215,1.585)); +#233298 = LINE('',#233299,#233300); +#233299 = CARTESIAN_POINT('',(120.244597,-54.186772,1.585)); +#233300 = VECTOR('',#233301,1.); +#233301 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#233302 = ORIENTED_EDGE('',*,*,#233303,.T.); +#233303 = EDGE_CURVE('',#233296,#233245,#233304,.T.); +#233304 = LINE('',#233305,#233306); +#233305 = CARTESIAN_POINT('',(120.213318,-54.124215,1.585)); +#233306 = VECTOR('',#233307,1.); +#233307 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#233308 = PLANE('',#233309); +#233309 = AXIS2_PLACEMENT_3D('',#233310,#233311,#233312); +#233310 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233311 = DIRECTION('',(0.,0.,1.)); +#233312 = DIRECTION('',(1.,0.,-0.)); +#233313 = SHELL_BASED_SURFACE_MODEL('',(#233314)); +#233314 = OPEN_SHELL('',(#233315)); +#233315 = ADVANCED_FACE('',(#233316),#233557,.T.); +#233316 = FACE_BOUND('',#233317,.F.); +#233317 = EDGE_LOOP('',(#233318,#233329,#233337,#233345,#233353,#233361, + #233370,#233378,#233387,#233395,#233403,#233411,#233419,#233427, + #233435,#233444,#233452,#233460,#233468,#233476,#233485,#233493, + #233501,#233509,#233518,#233526,#233534,#233542,#233551)); +#233318 = ORIENTED_EDGE('',*,*,#233319,.T.); +#233319 = EDGE_CURVE('',#233320,#233322,#233324,.T.); +#233320 = VERTEX_POINT('',#233321); +#233321 = CARTESIAN_POINT('',(127.508882,-53.957142,1.585)); +#233322 = VERTEX_POINT('',#233323); +#233323 = CARTESIAN_POINT('',(127.573882,-53.892142,1.585)); +#233324 = CIRCLE('',#233325,6.500103935389E-02); +#233325 = AXIS2_PLACEMENT_3D('',#233326,#233327,#233328); +#233326 = CARTESIAN_POINT('',(127.57388303934,-53.95714303934,1.585)); +#233327 = DIRECTION('',(0.,0.,-1.)); +#233328 = DIRECTION('',(-0.999999999872,1.598967627357E-05,0.)); +#233329 = ORIENTED_EDGE('',*,*,#233330,.T.); +#233330 = EDGE_CURVE('',#233322,#233331,#233333,.T.); +#233331 = VERTEX_POINT('',#233332); +#233332 = CARTESIAN_POINT('',(127.873882,-53.892142,1.585)); +#233333 = LINE('',#233334,#233335); +#233334 = CARTESIAN_POINT('',(127.573882,-53.892142,1.585)); +#233335 = VECTOR('',#233336,1.); +#233336 = DIRECTION('',(1.,0.,0.)); +#233337 = ORIENTED_EDGE('',*,*,#233338,.T.); +#233338 = EDGE_CURVE('',#233331,#233339,#233341,.T.); +#233339 = VERTEX_POINT('',#233340); +#233340 = CARTESIAN_POINT('',(127.898756,-53.89709,1.585)); +#233341 = LINE('',#233342,#233343); +#233342 = CARTESIAN_POINT('',(127.873882,-53.892142,1.585)); +#233343 = VECTOR('',#233344,1.); +#233344 = DIRECTION('',(0.98078336573,-0.19509994748,0.)); +#233345 = ORIENTED_EDGE('',*,*,#233346,.T.); +#233346 = EDGE_CURVE('',#233339,#233347,#233349,.T.); +#233347 = VERTEX_POINT('',#233348); +#233348 = CARTESIAN_POINT('',(127.919843,-53.91118,1.585)); +#233349 = LINE('',#233350,#233351); +#233350 = CARTESIAN_POINT('',(127.898756,-53.89709,1.585)); +#233351 = VECTOR('',#233352,1.); +#233352 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#233353 = ORIENTED_EDGE('',*,*,#233354,.T.); +#233354 = EDGE_CURVE('',#233347,#233355,#233357,.T.); +#233355 = VERTEX_POINT('',#233356); +#233356 = CARTESIAN_POINT('',(127.971003,-53.966461,1.585)); +#233357 = LINE('',#233358,#233359); +#233358 = CARTESIAN_POINT('',(127.919843,-53.91118,1.585)); +#233359 = VECTOR('',#233360,1.); +#233360 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#233361 = ORIENTED_EDGE('',*,*,#233362,.T.); +#233362 = EDGE_CURVE('',#233355,#233363,#233365,.T.); +#233363 = VERTEX_POINT('',#233364); +#233364 = CARTESIAN_POINT('',(127.970999,-54.376399,1.585)); +#233365 = CIRCLE('',#233366,0.409312568567); +#233366 = AXIS2_PLACEMENT_3D('',#233367,#233368,#233369); +#233367 = CARTESIAN_POINT('',(127.61670664806,-54.17142654294,1.585)); +#233368 = DIRECTION('',(0.,0.,-1.)); +#233369 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#233370 = ORIENTED_EDGE('',*,*,#233371,.T.); +#233371 = EDGE_CURVE('',#233363,#233372,#233374,.T.); +#233372 = VERTEX_POINT('',#233373); +#233373 = CARTESIAN_POINT('',(127.868322,-54.480322,1.585)); +#233374 = LINE('',#233375,#233376); +#233375 = CARTESIAN_POINT('',(127.970999,-54.376399,1.585)); +#233376 = VECTOR('',#233377,1.); +#233377 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#233378 = ORIENTED_EDGE('',*,*,#233379,.T.); +#233379 = EDGE_CURVE('',#233372,#233380,#233382,.T.); +#233380 = VERTEX_POINT('',#233381); +#233381 = CARTESIAN_POINT('',(127.429546,-54.577344,1.585)); +#233382 = CIRCLE('',#233383,0.675422176574); +#233383 = AXIS2_PLACEMENT_3D('',#233384,#233385,#233386); +#233384 = CARTESIAN_POINT('',(127.51141275007,-53.90690164465,1.585)); +#233385 = DIRECTION('',(0.,0.,-1.)); +#233386 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#233387 = ORIENTED_EDGE('',*,*,#233388,.T.); +#233388 = EDGE_CURVE('',#233380,#233389,#233391,.T.); +#233389 = VERTEX_POINT('',#233390); +#233390 = CARTESIAN_POINT('',(127.244813,-54.529566,1.585)); +#233391 = LINE('',#233392,#233393); +#233392 = CARTESIAN_POINT('',(127.429546,-54.577344,1.585)); +#233393 = VECTOR('',#233394,1.); +#233394 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#233395 = ORIENTED_EDGE('',*,*,#233396,.T.); +#233396 = EDGE_CURVE('',#233389,#233397,#233399,.T.); +#233397 = VERTEX_POINT('',#233398); +#233398 = CARTESIAN_POINT('',(127.142206,-54.474533,1.585)); +#233399 = LINE('',#233400,#233401); +#233400 = CARTESIAN_POINT('',(127.244813,-54.529566,1.585)); +#233401 = VECTOR('',#233402,1.); +#233402 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#233403 = ORIENTED_EDGE('',*,*,#233404,.T.); +#233404 = EDGE_CURVE('',#233397,#233405,#233407,.T.); +#233405 = VERTEX_POINT('',#233406); +#233406 = CARTESIAN_POINT('',(127.048191,-54.376395,1.585)); +#233407 = LINE('',#233408,#233409); +#233408 = CARTESIAN_POINT('',(127.142206,-54.474533,1.585)); +#233409 = VECTOR('',#233410,1.); +#233410 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#233411 = ORIENTED_EDGE('',*,*,#233412,.T.); +#233412 = EDGE_CURVE('',#233405,#233413,#233415,.T.); +#233413 = VERTEX_POINT('',#233414); +#233414 = CARTESIAN_POINT('',(126.99663,-54.224507,1.585)); +#233415 = LINE('',#233416,#233417); +#233416 = CARTESIAN_POINT('',(127.048191,-54.376395,1.585)); +#233417 = VECTOR('',#233418,1.); +#233418 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#233419 = ORIENTED_EDGE('',*,*,#233420,.T.); +#233420 = EDGE_CURVE('',#233413,#233421,#233423,.T.); +#233421 = VERTEX_POINT('',#233422); +#233422 = CARTESIAN_POINT('',(126.997512,-54.071057,1.585)); +#233423 = LINE('',#233424,#233425); +#233424 = CARTESIAN_POINT('',(126.99663,-54.224507,1.585)); +#233425 = VECTOR('',#233426,1.); +#233426 = DIRECTION('',(5.747705643239E-03,0.999983481803,0.)); +#233427 = ORIENTED_EDGE('',*,*,#233428,.T.); +#233428 = EDGE_CURVE('',#233421,#233429,#233431,.T.); +#233429 = VERTEX_POINT('',#233430); +#233430 = CARTESIAN_POINT('',(127.044316,-53.97093,1.585)); +#233431 = LINE('',#233432,#233433); +#233432 = CARTESIAN_POINT('',(126.997512,-54.071057,1.585)); +#233433 = VECTOR('',#233434,1.); +#233434 = DIRECTION('',(0.423465384776,0.90591228488,0.)); +#233435 = ORIENTED_EDGE('',*,*,#233436,.T.); +#233436 = EDGE_CURVE('',#233429,#233437,#233439,.T.); +#233437 = VERTEX_POINT('',#233438); +#233438 = CARTESIAN_POINT('',(127.160592,-54.029068,1.585)); +#233439 = CIRCLE('',#233440,6.500026004258E-02); +#233440 = AXIS2_PLACEMENT_3D('',#233441,#233442,#233443); +#233441 = CARTESIAN_POINT('',(127.10245365279,-53.9999996944,1.585)); +#233442 = DIRECTION('',(0.,0.,-1.)); +#233443 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#233444 = ORIENTED_EDGE('',*,*,#233445,.T.); +#233445 = EDGE_CURVE('',#233437,#233446,#233448,.T.); +#233446 = VERTEX_POINT('',#233447); +#233447 = CARTESIAN_POINT('',(127.124597,-54.101058,1.585)); +#233448 = LINE('',#233449,#233450); +#233449 = CARTESIAN_POINT('',(127.160592,-54.029068,1.585)); +#233450 = VECTOR('',#233451,1.); +#233451 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#233452 = ORIENTED_EDGE('',*,*,#233453,.T.); +#233453 = EDGE_CURVE('',#233446,#233454,#233456,.T.); +#233454 = VERTEX_POINT('',#233455); +#233455 = CARTESIAN_POINT('',(127.124597,-54.203738,1.585)); +#233456 = LINE('',#233457,#233458); +#233457 = CARTESIAN_POINT('',(127.124597,-54.101058,1.585)); +#233458 = VECTOR('',#233459,1.); +#233459 = DIRECTION('',(0.,-1.,0.)); +#233460 = ORIENTED_EDGE('',*,*,#233461,.T.); +#233461 = EDGE_CURVE('',#233454,#233462,#233464,.T.); +#233462 = VERTEX_POINT('',#233463); +#233463 = CARTESIAN_POINT('',(127.159265,-54.307743,1.585)); +#233464 = LINE('',#233465,#233466); +#233465 = CARTESIAN_POINT('',(127.124597,-54.203738,1.585)); +#233466 = VECTOR('',#233467,1.); +#233467 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#233468 = ORIENTED_EDGE('',*,*,#233469,.T.); +#233469 = EDGE_CURVE('',#233462,#233470,#233472,.T.); +#233470 = VERTEX_POINT('',#233471); +#233471 = CARTESIAN_POINT('',(127.226669,-54.375149,1.585)); +#233472 = LINE('',#233473,#233474); +#233473 = CARTESIAN_POINT('',(127.159265,-54.307743,1.585)); +#233474 = VECTOR('',#233475,1.); +#233475 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#233476 = ORIENTED_EDGE('',*,*,#233477,.T.); +#233477 = EDGE_CURVE('',#233470,#233478,#233480,.T.); +#233478 = VERTEX_POINT('',#233479); +#233479 = CARTESIAN_POINT('',(127.565881,-54.449285,1.585)); +#233480 = CIRCLE('',#233481,0.553317785495); +#233481 = AXIS2_PLACEMENT_3D('',#233482,#233483,#233484); +#233482 = CARTESIAN_POINT('',(127.5084500839,-53.89895576979,1.585)); +#233483 = DIRECTION('',(0.,0.,1.)); +#233484 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#233485 = ORIENTED_EDGE('',*,*,#233486,.T.); +#233486 = EDGE_CURVE('',#233478,#233487,#233489,.T.); +#233487 = VERTEX_POINT('',#233488); +#233488 = CARTESIAN_POINT('',(127.722622,-54.410099,1.585)); +#233489 = LINE('',#233490,#233491); +#233490 = CARTESIAN_POINT('',(127.565881,-54.449285,1.585)); +#233491 = VECTOR('',#233492,1.); +#233492 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#233493 = ORIENTED_EDGE('',*,*,#233494,.T.); +#233494 = EDGE_CURVE('',#233487,#233495,#233497,.T.); +#233495 = VERTEX_POINT('',#233496); +#233496 = CARTESIAN_POINT('',(127.792522,-54.37515,1.585)); +#233497 = LINE('',#233498,#233499); +#233498 = CARTESIAN_POINT('',(127.722622,-54.410099,1.585)); +#233499 = VECTOR('',#233500,1.); +#233500 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#233501 = ORIENTED_EDGE('',*,*,#233502,.T.); +#233502 = EDGE_CURVE('',#233495,#233503,#233505,.T.); +#233503 = VERTEX_POINT('',#233504); +#233504 = CARTESIAN_POINT('',(127.859928,-54.307743,1.585)); +#233505 = LINE('',#233506,#233507); +#233506 = CARTESIAN_POINT('',(127.792522,-54.37515,1.585)); +#233507 = VECTOR('',#233508,1.); +#233508 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#233509 = ORIENTED_EDGE('',*,*,#233510,.T.); +#233510 = EDGE_CURVE('',#233503,#233511,#233513,.T.); +#233511 = VERTEX_POINT('',#233512); +#233512 = CARTESIAN_POINT('',(127.859928,-54.035111,1.585)); +#233513 = CIRCLE('',#233514,0.272194686174); +#233514 = AXIS2_PLACEMENT_3D('',#233515,#233516,#233517); +#233515 = CARTESIAN_POINT('',(127.62432686391,-54.171427,1.585)); +#233516 = DIRECTION('',(0.,-0.,1.)); +#233517 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#233518 = ORIENTED_EDGE('',*,*,#233519,.T.); +#233519 = EDGE_CURVE('',#233511,#233520,#233522,.T.); +#233520 = VERTEX_POINT('',#233521); +#233521 = CARTESIAN_POINT('',(127.846959,-54.022142,1.585)); +#233522 = LINE('',#233523,#233524); +#233523 = CARTESIAN_POINT('',(127.859928,-54.035111,1.585)); +#233524 = VECTOR('',#233525,1.); +#233525 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233526 = ORIENTED_EDGE('',*,*,#233527,.T.); +#233527 = EDGE_CURVE('',#233520,#233528,#233530,.T.); +#233528 = VERTEX_POINT('',#233529); +#233529 = CARTESIAN_POINT('',(127.638882,-54.022142,1.585)); +#233530 = LINE('',#233531,#233532); +#233531 = CARTESIAN_POINT('',(127.846959,-54.022142,1.585)); +#233532 = VECTOR('',#233533,1.); +#233533 = DIRECTION('',(-1.,0.,0.)); +#233534 = ORIENTED_EDGE('',*,*,#233535,.T.); +#233535 = EDGE_CURVE('',#233528,#233536,#233538,.T.); +#233536 = VERTEX_POINT('',#233537); +#233537 = CARTESIAN_POINT('',(127.638882,-54.128571,1.585)); +#233538 = LINE('',#233539,#233540); +#233539 = CARTESIAN_POINT('',(127.638882,-54.022142,1.585)); +#233540 = VECTOR('',#233541,1.); +#233541 = DIRECTION('',(0.,-1.,0.)); +#233542 = ORIENTED_EDGE('',*,*,#233543,.T.); +#233543 = EDGE_CURVE('',#233536,#233544,#233546,.T.); +#233544 = VERTEX_POINT('',#233545); +#233545 = CARTESIAN_POINT('',(127.508882,-54.128571,1.585)); +#233546 = CIRCLE('',#233547,6.500000000091E-02); +#233547 = AXIS2_PLACEMENT_3D('',#233548,#233549,#233550); +#233548 = CARTESIAN_POINT('',(127.573882,-54.12857065513,1.585)); +#233549 = DIRECTION('',(-0.,0.,-1.)); +#233550 = DIRECTION('',(0.999999999986,-5.305658134983E-06,-0.)); +#233551 = ORIENTED_EDGE('',*,*,#233552,.T.); +#233552 = EDGE_CURVE('',#233544,#233320,#233553,.T.); +#233553 = LINE('',#233554,#233555); +#233554 = CARTESIAN_POINT('',(127.508882,-54.128571,1.585)); +#233555 = VECTOR('',#233556,1.); +#233556 = DIRECTION('',(0.,1.,0.)); +#233557 = PLANE('',#233558); +#233558 = AXIS2_PLACEMENT_3D('',#233559,#233560,#233561); +#233559 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233560 = DIRECTION('',(0.,0.,1.)); +#233561 = DIRECTION('',(1.,0.,-0.)); +#233562 = SHELL_BASED_SURFACE_MODEL('',(#233563)); +#233563 = OPEN_SHELL('',(#233564)); +#233564 = ADVANCED_FACE('',(#233565),#233667,.T.); +#233565 = FACE_BOUND('',#233566,.F.); +#233566 = EDGE_LOOP('',(#233567,#233578,#233586,#233594,#233602,#233611, + #233619,#233627,#233636,#233644,#233653,#233661)); +#233567 = ORIENTED_EDGE('',*,*,#233568,.T.); +#233568 = EDGE_CURVE('',#233569,#233571,#233573,.T.); +#233569 = VERTEX_POINT('',#233570); +#233570 = CARTESIAN_POINT('',(134.699545,-54.046553,1.585)); +#233571 = VERTEX_POINT('',#233572); +#233572 = CARTESIAN_POINT('',(134.824597,-54.071427,1.585)); +#233573 = CIRCLE('',#233574,6.499988811649E-02); +#233574 = AXIS2_PLACEMENT_3D('',#233575,#233576,#233577); +#233575 = CARTESIAN_POINT('',(134.75959711188,-54.0714272701,1.585)); +#233576 = DIRECTION('',(0.,0.,-1.)); +#233577 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#233578 = ORIENTED_EDGE('',*,*,#233579,.T.); +#233579 = EDGE_CURVE('',#233571,#233580,#233582,.T.); +#233580 = VERTEX_POINT('',#233581); +#233581 = CARTESIAN_POINT('',(134.824597,-54.434999,1.585)); +#233582 = LINE('',#233583,#233584); +#233583 = CARTESIAN_POINT('',(134.824597,-54.071427,1.585)); +#233584 = VECTOR('',#233585,1.); +#233585 = DIRECTION('',(0.,-1.,0.)); +#233586 = ORIENTED_EDGE('',*,*,#233587,.T.); +#233587 = EDGE_CURVE('',#233580,#233588,#233590,.T.); +#233588 = VERTEX_POINT('',#233589); +#233589 = CARTESIAN_POINT('',(135.123168,-54.434999,1.585)); +#233590 = LINE('',#233591,#233592); +#233591 = CARTESIAN_POINT('',(134.824597,-54.434999,1.585)); +#233592 = VECTOR('',#233593,1.); +#233593 = DIRECTION('',(1.,0.,0.)); +#233594 = ORIENTED_EDGE('',*,*,#233595,.T.); +#233595 = EDGE_CURVE('',#233588,#233596,#233598,.T.); +#233596 = VERTEX_POINT('',#233597); +#233597 = CARTESIAN_POINT('',(135.123168,-54.199999,1.585)); +#233598 = LINE('',#233599,#233600); +#233599 = CARTESIAN_POINT('',(135.123168,-54.434999,1.585)); +#233600 = VECTOR('',#233601,1.); +#233601 = DIRECTION('',(0.,1.,0.)); +#233602 = ORIENTED_EDGE('',*,*,#233603,.T.); +#233603 = EDGE_CURVE('',#233596,#233604,#233606,.T.); +#233604 = VERTEX_POINT('',#233605); +#233605 = CARTESIAN_POINT('',(135.253168,-54.199999,1.585)); +#233606 = CIRCLE('',#233607,6.500000000092E-02); +#233607 = AXIS2_PLACEMENT_3D('',#233608,#233609,#233610); +#233608 = CARTESIAN_POINT('',(135.188168,-54.19999934486,1.585)); +#233609 = DIRECTION('',(0.,0.,-1.)); +#233610 = DIRECTION('',(-0.999999999986,5.305658244295E-06,0.)); +#233611 = ORIENTED_EDGE('',*,*,#233612,.T.); +#233612 = EDGE_CURVE('',#233604,#233613,#233615,.T.); +#233613 = VERTEX_POINT('',#233614); +#233614 = CARTESIAN_POINT('',(135.253168,-54.434999,1.585)); +#233615 = LINE('',#233616,#233617); +#233616 = CARTESIAN_POINT('',(135.253168,-54.199999,1.585)); +#233617 = VECTOR('',#233618,1.); +#233618 = DIRECTION('',(0.,-1.,0.)); +#233619 = ORIENTED_EDGE('',*,*,#233620,.T.); +#233620 = EDGE_CURVE('',#233613,#233621,#233623,.T.); +#233621 = VERTEX_POINT('',#233622); +#233622 = CARTESIAN_POINT('',(135.659597,-54.434999,1.585)); +#233623 = LINE('',#233624,#233625); +#233624 = CARTESIAN_POINT('',(135.253168,-54.434999,1.585)); +#233625 = VECTOR('',#233626,1.); +#233626 = DIRECTION('',(1.,0.,0.)); +#233627 = ORIENTED_EDGE('',*,*,#233628,.T.); +#233628 = EDGE_CURVE('',#233621,#233629,#233631,.T.); +#233629 = VERTEX_POINT('',#233630); +#233630 = CARTESIAN_POINT('',(135.659597,-54.564999,1.585)); +#233631 = CIRCLE('',#233632,6.500000000092E-02); +#233632 = AXIS2_PLACEMENT_3D('',#233633,#233634,#233635); +#233633 = CARTESIAN_POINT('',(135.65959665513,-54.499999,1.585)); +#233634 = DIRECTION('',(0.,0.,-1.)); +#233635 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#233636 = ORIENTED_EDGE('',*,*,#233637,.T.); +#233637 = EDGE_CURVE('',#233629,#233638,#233640,.T.); +#233638 = VERTEX_POINT('',#233639); +#233639 = CARTESIAN_POINT('',(134.759597,-54.564999,1.585)); +#233640 = LINE('',#233641,#233642); +#233641 = CARTESIAN_POINT('',(135.659597,-54.564999,1.585)); +#233642 = VECTOR('',#233643,1.); +#233643 = DIRECTION('',(-1.,0.,0.)); +#233644 = ORIENTED_EDGE('',*,*,#233645,.T.); +#233645 = EDGE_CURVE('',#233638,#233646,#233648,.T.); +#233646 = VERTEX_POINT('',#233647); +#233647 = CARTESIAN_POINT('',(134.694597,-54.499999,1.585)); +#233648 = CIRCLE('',#233649,6.500103935391E-02); +#233649 = AXIS2_PLACEMENT_3D('',#233650,#233651,#233652); +#233650 = CARTESIAN_POINT('',(134.75959803934,-54.49999796065,1.585)); +#233651 = DIRECTION('',(0.,0.,-1.)); +#233652 = DIRECTION('',(-1.598967605494E-05,-0.999999999872,-0.)); +#233653 = ORIENTED_EDGE('',*,*,#233654,.T.); +#233654 = EDGE_CURVE('',#233646,#233655,#233657,.T.); +#233655 = VERTEX_POINT('',#233656); +#233656 = CARTESIAN_POINT('',(134.694597,-54.071427,1.585)); +#233657 = LINE('',#233658,#233659); +#233658 = CARTESIAN_POINT('',(134.694597,-54.499999,1.585)); +#233659 = VECTOR('',#233660,1.); +#233660 = DIRECTION('',(0.,1.,0.)); +#233661 = ORIENTED_EDGE('',*,*,#233662,.T.); +#233662 = EDGE_CURVE('',#233655,#233569,#233663,.T.); +#233663 = LINE('',#233664,#233665); +#233664 = CARTESIAN_POINT('',(134.694597,-54.071427,1.585)); +#233665 = VECTOR('',#233666,1.); +#233666 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#233667 = PLANE('',#233668); +#233668 = AXIS2_PLACEMENT_3D('',#233669,#233670,#233671); +#233669 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233670 = DIRECTION('',(0.,0.,1.)); +#233671 = DIRECTION('',(1.,0.,-0.)); +#233672 = SHELL_BASED_SURFACE_MODEL('',(#233673)); +#233673 = OPEN_SHELL('',(#233674)); +#233674 = ADVANCED_FACE('',(#233675,#233776),#233835,.T.); +#233675 = FACE_BOUND('',#233676,.F.); +#233676 = EDGE_LOOP('',(#233677,#233688,#233696,#233704,#233712,#233720, + #233728,#233737,#233745,#233754,#233762,#233770)); +#233677 = ORIENTED_EDGE('',*,*,#233678,.T.); +#233678 = EDGE_CURVE('',#233679,#233681,#233683,.T.); +#233679 = VERTEX_POINT('',#233680); +#233680 = CARTESIAN_POINT('',(121.958013,-53.969675,1.585)); +#233681 = VERTEX_POINT('',#233682); +#233682 = CARTESIAN_POINT('',(122.238666,-53.920432,1.585)); +#233683 = CIRCLE('',#233684,0.327183487819); +#233684 = AXIS2_PLACEMENT_3D('',#233685,#233686,#233687); +#233685 = CARTESIAN_POINT('',(122.14924076591,-54.23515753472,1.585)); +#233686 = DIRECTION('',(0.,0.,-1.)); +#233687 = DIRECTION('',(-0.584466432542,0.811417888163,0.)); +#233688 = ORIENTED_EDGE('',*,*,#233689,.T.); +#233689 = EDGE_CURVE('',#233681,#233690,#233692,.T.); +#233690 = VERTEX_POINT('',#233691); +#233691 = CARTESIAN_POINT('',(122.341273,-53.975465,1.585)); +#233692 = LINE('',#233693,#233694); +#233693 = CARTESIAN_POINT('',(122.238666,-53.920432,1.585)); +#233694 = VECTOR('',#233695,1.); +#233695 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#233696 = ORIENTED_EDGE('',*,*,#233697,.T.); +#233697 = EDGE_CURVE('',#233690,#233698,#233700,.T.); +#233698 = VERTEX_POINT('',#233699); +#233699 = CARTESIAN_POINT('',(122.396306,-54.035215,1.585)); +#233700 = LINE('',#233701,#233702); +#233701 = CARTESIAN_POINT('',(122.341273,-53.975465,1.585)); +#233702 = VECTOR('',#233703,1.); +#233703 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#233704 = ORIENTED_EDGE('',*,*,#233705,.T.); +#233705 = EDGE_CURVE('',#233698,#233706,#233708,.T.); +#233706 = VERTEX_POINT('',#233707); +#233707 = CARTESIAN_POINT('',(122.443109,-54.135342,1.585)); +#233708 = LINE('',#233709,#233710); +#233709 = CARTESIAN_POINT('',(122.396306,-54.035215,1.585)); +#233710 = VECTOR('',#233711,1.); +#233711 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#233712 = ORIENTED_EDGE('',*,*,#233713,.T.); +#233713 = EDGE_CURVE('',#233706,#233714,#233716,.T.); +#233714 = VERTEX_POINT('',#233715); +#233715 = CARTESIAN_POINT('',(122.446025,-54.427856,1.585)); +#233716 = LINE('',#233717,#233718); +#233717 = CARTESIAN_POINT('',(122.443109,-54.135342,1.585)); +#233718 = VECTOR('',#233719,1.); +#233719 = DIRECTION('',(9.968258341542E-03,-0.999950315679,0.)); +#233720 = ORIENTED_EDGE('',*,*,#233721,.T.); +#233721 = EDGE_CURVE('',#233714,#233722,#233724,.T.); +#233722 = VERTEX_POINT('',#233723); +#233723 = CARTESIAN_POINT('',(122.809597,-54.427856,1.585)); +#233724 = LINE('',#233725,#233726); +#233725 = CARTESIAN_POINT('',(122.446025,-54.427856,1.585)); +#233726 = VECTOR('',#233727,1.); +#233727 = DIRECTION('',(1.,0.,0.)); +#233728 = ORIENTED_EDGE('',*,*,#233729,.T.); +#233729 = EDGE_CURVE('',#233722,#233730,#233732,.T.); +#233730 = VERTEX_POINT('',#233731); +#233731 = CARTESIAN_POINT('',(122.809597,-54.557856,1.585)); +#233732 = CIRCLE('',#233733,6.500000000092E-02); +#233733 = AXIS2_PLACEMENT_3D('',#233734,#233735,#233736); +#233734 = CARTESIAN_POINT('',(122.80959665513,-54.492856,1.585)); +#233735 = DIRECTION('',(0.,0.,-1.)); +#233736 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#233737 = ORIENTED_EDGE('',*,*,#233738,.T.); +#233738 = EDGE_CURVE('',#233730,#233739,#233741,.T.); +#233739 = VERTEX_POINT('',#233740); +#233740 = CARTESIAN_POINT('',(121.909597,-54.557856,1.585)); +#233741 = LINE('',#233742,#233743); +#233742 = CARTESIAN_POINT('',(122.809597,-54.557856,1.585)); +#233743 = VECTOR('',#233744,1.); +#233744 = DIRECTION('',(-1.,0.,0.)); +#233745 = ORIENTED_EDGE('',*,*,#233746,.T.); +#233746 = EDGE_CURVE('',#233739,#233747,#233749,.T.); +#233747 = VERTEX_POINT('',#233748); +#233748 = CARTESIAN_POINT('',(121.844597,-54.492856,1.585)); +#233749 = CIRCLE('',#233750,6.500103935389E-02); +#233750 = AXIS2_PLACEMENT_3D('',#233751,#233752,#233753); +#233751 = CARTESIAN_POINT('',(121.90959803934,-54.49285496065,1.585)); +#233752 = DIRECTION('',(0.,0.,-1.)); +#233753 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#233754 = ORIENTED_EDGE('',*,*,#233755,.T.); +#233755 = EDGE_CURVE('',#233747,#233756,#233758,.T.); +#233756 = VERTEX_POINT('',#233757); +#233757 = CARTESIAN_POINT('',(121.847512,-54.135342,1.585)); +#233758 = LINE('',#233759,#233760); +#233759 = CARTESIAN_POINT('',(121.844597,-54.492856,1.585)); +#233760 = VECTOR('',#233761,1.); +#233761 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#233762 = ORIENTED_EDGE('',*,*,#233763,.T.); +#233763 = EDGE_CURVE('',#233756,#233764,#233766,.T.); +#233764 = VERTEX_POINT('',#233765); +#233765 = CARTESIAN_POINT('',(121.900702,-54.026986,1.585)); +#233766 = LINE('',#233767,#233768); +#233767 = CARTESIAN_POINT('',(121.847512,-54.135342,1.585)); +#233768 = VECTOR('',#233769,1.); +#233769 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#233770 = ORIENTED_EDGE('',*,*,#233771,.T.); +#233771 = EDGE_CURVE('',#233764,#233679,#233772,.T.); +#233772 = LINE('',#233773,#233774); +#233773 = CARTESIAN_POINT('',(121.900702,-54.026986,1.585)); +#233774 = VECTOR('',#233775,1.); +#233775 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233776 = FACE_BOUND('',#233777,.F.); +#233777 = EDGE_LOOP('',(#233778,#233789,#233797,#233805,#233813,#233821, + #233829)); +#233778 = ORIENTED_EDGE('',*,*,#233779,.T.); +#233779 = EDGE_CURVE('',#233780,#233782,#233784,.T.); +#233780 = VERTEX_POINT('',#233781); +#233781 = CARTESIAN_POINT('',(122.256808,-54.074848,1.585)); +#233782 = VERTEX_POINT('',#233783); +#233783 = CARTESIAN_POINT('',(122.005875,-54.102786,1.585)); +#233784 = CIRCLE('',#233785,0.180979134862); +#233785 = AXIS2_PLACEMENT_3D('',#233786,#233787,#233788); +#233786 = CARTESIAN_POINT('',(122.14569076987,-54.21769900078,1.585)); +#233787 = DIRECTION('',(0.,0.,1.)); +#233788 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#233789 = ORIENTED_EDGE('',*,*,#233790,.T.); +#233790 = EDGE_CURVE('',#233782,#233791,#233793,.T.); +#233791 = VERTEX_POINT('',#233792); +#233792 = CARTESIAN_POINT('',(121.974597,-54.165343,1.585)); +#233793 = LINE('',#233794,#233795); +#233794 = CARTESIAN_POINT('',(122.005875,-54.102786,1.585)); +#233795 = VECTOR('',#233796,1.); +#233796 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#233797 = ORIENTED_EDGE('',*,*,#233798,.T.); +#233798 = EDGE_CURVE('',#233791,#233799,#233801,.T.); +#233799 = VERTEX_POINT('',#233800); +#233800 = CARTESIAN_POINT('',(121.974597,-54.427856,1.585)); +#233801 = LINE('',#233802,#233803); +#233802 = CARTESIAN_POINT('',(121.974597,-54.165343,1.585)); +#233803 = VECTOR('',#233804,1.); +#233804 = DIRECTION('',(0.,-1.,0.)); +#233805 = ORIENTED_EDGE('',*,*,#233806,.T.); +#233806 = EDGE_CURVE('',#233799,#233807,#233809,.T.); +#233807 = VERTEX_POINT('',#233808); +#233808 = CARTESIAN_POINT('',(122.316025,-54.427856,1.585)); +#233809 = LINE('',#233810,#233811); +#233810 = CARTESIAN_POINT('',(121.974597,-54.427856,1.585)); +#233811 = VECTOR('',#233812,1.); +#233812 = DIRECTION('',(1.,0.,0.)); +#233813 = ORIENTED_EDGE('',*,*,#233814,.T.); +#233814 = EDGE_CURVE('',#233807,#233815,#233817,.T.); +#233815 = VERTEX_POINT('',#233816); +#233816 = CARTESIAN_POINT('',(122.316025,-54.165343,1.585)); +#233817 = LINE('',#233818,#233819); +#233818 = CARTESIAN_POINT('',(122.316025,-54.427856,1.585)); +#233819 = VECTOR('',#233820,1.); +#233820 = DIRECTION('',(0.,1.,0.)); +#233821 = ORIENTED_EDGE('',*,*,#233822,.T.); +#233822 = EDGE_CURVE('',#233815,#233823,#233825,.T.); +#233823 = VERTEX_POINT('',#233824); +#233824 = CARTESIAN_POINT('',(122.284746,-54.102786,1.585)); +#233825 = LINE('',#233826,#233827); +#233826 = CARTESIAN_POINT('',(122.316025,-54.165343,1.585)); +#233827 = VECTOR('',#233828,1.); +#233828 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#233829 = ORIENTED_EDGE('',*,*,#233830,.T.); +#233830 = EDGE_CURVE('',#233823,#233780,#233831,.T.); +#233831 = LINE('',#233832,#233833); +#233832 = CARTESIAN_POINT('',(122.284746,-54.102786,1.585)); +#233833 = VECTOR('',#233834,1.); +#233834 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#233835 = PLANE('',#233836); +#233836 = AXIS2_PLACEMENT_3D('',#233837,#233838,#233839); +#233837 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233838 = DIRECTION('',(0.,0.,1.)); +#233839 = DIRECTION('',(1.,0.,-0.)); +#233840 = SHELL_BASED_SURFACE_MODEL('',(#233841)); +#233841 = OPEN_SHELL('',(#233842)); +#233842 = ADVANCED_FACE('',(#233843),#233879,.T.); +#233843 = FACE_BOUND('',#233844,.F.); +#233844 = EDGE_LOOP('',(#233845,#233856,#233864,#233873)); +#233845 = ORIENTED_EDGE('',*,*,#233846,.T.); +#233846 = EDGE_CURVE('',#233847,#233849,#233851,.T.); +#233847 = VERTEX_POINT('',#233848); +#233848 = CARTESIAN_POINT('',(132.099597,-54.486428,1.585)); +#233849 = VERTEX_POINT('',#233850); +#233850 = CARTESIAN_POINT('',(132.099597,-54.356428,1.585)); +#233851 = CIRCLE('',#233852,6.500000000092E-02); +#233852 = AXIS2_PLACEMENT_3D('',#233853,#233854,#233855); +#233853 = CARTESIAN_POINT('',(132.09959734486,-54.421428,1.585)); +#233854 = DIRECTION('',(0.,0.,-1.)); +#233855 = DIRECTION('',(-5.305658462925E-06,-0.999999999986,-0.)); +#233856 = ORIENTED_EDGE('',*,*,#233857,.T.); +#233857 = EDGE_CURVE('',#233849,#233858,#233860,.T.); +#233858 = VERTEX_POINT('',#233859); +#233859 = CARTESIAN_POINT('',(132.999597,-54.356428,1.585)); +#233860 = LINE('',#233861,#233862); +#233861 = CARTESIAN_POINT('',(132.099597,-54.356428,1.585)); +#233862 = VECTOR('',#233863,1.); +#233863 = DIRECTION('',(1.,0.,0.)); +#233864 = ORIENTED_EDGE('',*,*,#233865,.T.); +#233865 = EDGE_CURVE('',#233858,#233866,#233868,.T.); +#233866 = VERTEX_POINT('',#233867); +#233867 = CARTESIAN_POINT('',(132.999597,-54.486428,1.585)); +#233868 = CIRCLE('',#233869,6.500000000091E-02); +#233869 = AXIS2_PLACEMENT_3D('',#233870,#233871,#233872); +#233870 = CARTESIAN_POINT('',(132.99959665513,-54.421428,1.585)); +#233871 = DIRECTION('',(0.,0.,-1.)); +#233872 = DIRECTION('',(5.305657588412E-06,0.999999999986,0.)); +#233873 = ORIENTED_EDGE('',*,*,#233874,.T.); +#233874 = EDGE_CURVE('',#233866,#233847,#233875,.T.); +#233875 = LINE('',#233876,#233877); +#233876 = CARTESIAN_POINT('',(132.999597,-54.486428,1.585)); +#233877 = VECTOR('',#233878,1.); +#233878 = DIRECTION('',(-1.,0.,0.)); +#233879 = PLANE('',#233880); +#233880 = AXIS2_PLACEMENT_3D('',#233881,#233882,#233883); +#233881 = CARTESIAN_POINT('',(0.,0.,1.585)); +#233882 = DIRECTION('',(0.,0.,1.)); +#233883 = DIRECTION('',(1.,0.,-0.)); +#233884 = SHELL_BASED_SURFACE_MODEL('',(#233885)); +#233885 = OPEN_SHELL('',(#233886)); +#233886 = ADVANCED_FACE('',(#233887),#234089,.T.); +#233887 = FACE_BOUND('',#233888,.F.); +#233888 = EDGE_LOOP('',(#233889,#233900,#233908,#233916,#233924,#233932, + #233941,#233949,#233958,#233966,#233975,#233983,#233992,#234000, + #234009,#234017,#234026,#234034,#234042,#234050,#234059,#234067, + #234075,#234083)); +#233889 = ORIENTED_EDGE('',*,*,#233890,.T.); +#233890 = EDGE_CURVE('',#233891,#233893,#233895,.T.); +#233891 = VERTEX_POINT('',#233892); +#233892 = CARTESIAN_POINT('',(129.840369,-54.013914,1.585)); +#233893 = VERTEX_POINT('',#233894); +#233894 = CARTESIAN_POINT('',(130.059225,-53.795057,1.585)); +#233895 = CIRCLE('',#233896,0.308109459502); +#233896 = AXIS2_PLACEMENT_3D('',#233897,#233898,#233899); +#233897 = CARTESIAN_POINT('',(130.13818845359,-54.09287609279,1.585)); +#233898 = DIRECTION('',(0.,0.,-1.)); +#233899 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#233900 = ORIENTED_EDGE('',*,*,#233901,.T.); +#233901 = EDGE_CURVE('',#233893,#233902,#233904,.T.); +#233902 = VERTEX_POINT('',#233903); +#233903 = CARTESIAN_POINT('',(130.291361,-53.792777,1.585)); +#233904 = LINE('',#233905,#233906); +#233905 = CARTESIAN_POINT('',(130.059225,-53.795057,1.585)); +#233906 = VECTOR('',#233907,1.); +#233907 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#233908 = ORIENTED_EDGE('',*,*,#233909,.T.); +#233909 = EDGE_CURVE('',#233902,#233910,#233912,.T.); +#233910 = VERTEX_POINT('',#233911); +#233911 = CARTESIAN_POINT('',(130.317237,-53.799004,1.585)); +#233912 = LINE('',#233913,#233914); +#233913 = CARTESIAN_POINT('',(130.291361,-53.792777,1.585)); +#233914 = VECTOR('',#233915,1.); +#233915 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#233916 = ORIENTED_EDGE('',*,*,#233917,.T.); +#233917 = EDGE_CURVE('',#233910,#233918,#233920,.T.); +#233918 = VERTEX_POINT('',#233919); +#233919 = CARTESIAN_POINT('',(130.419844,-53.854037,1.585)); +#233920 = LINE('',#233921,#233922); +#233921 = CARTESIAN_POINT('',(130.317237,-53.799004,1.585)); +#233922 = VECTOR('',#233923,1.); +#233923 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#233924 = ORIENTED_EDGE('',*,*,#233925,.T.); +#233925 = EDGE_CURVE('',#233918,#233926,#233928,.T.); +#233926 = VERTEX_POINT('',#233927); +#233927 = CARTESIAN_POINT('',(130.474878,-53.913788,1.585)); +#233928 = LINE('',#233929,#233930); +#233929 = CARTESIAN_POINT('',(130.419844,-53.854037,1.585)); +#233930 = VECTOR('',#233931,1.); +#233931 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#233932 = ORIENTED_EDGE('',*,*,#233933,.T.); +#233933 = EDGE_CURVE('',#233926,#233934,#233936,.T.); +#233934 = VERTEX_POINT('',#233935); +#233935 = CARTESIAN_POINT('',(130.468491,-54.365868,1.585)); +#233936 = CIRCLE('',#233937,0.407997408492); +#233937 = AXIS2_PLACEMENT_3D('',#233938,#233939,#233940); +#233938 = CARTESIAN_POINT('',(130.1320750414,-54.13502998723,1.585)); +#233939 = DIRECTION('',(0.,0.,-1.)); +#233940 = DIRECTION('',(0.840208666673,0.542263216941,0.)); +#233941 = ORIENTED_EDGE('',*,*,#233942,.T.); +#233942 = EDGE_CURVE('',#233934,#233943,#233945,.T.); +#233943 = VERTEX_POINT('',#233944); +#233944 = CARTESIAN_POINT('',(130.419843,-54.41739,1.585)); +#233945 = LINE('',#233946,#233947); +#233946 = CARTESIAN_POINT('',(130.468491,-54.365868,1.585)); +#233947 = VECTOR('',#233948,1.); +#233948 = DIRECTION('',(-0.686536505863,-0.727095334958,0.)); +#233949 = ORIENTED_EDGE('',*,*,#233950,.T.); +#233950 = EDGE_CURVE('',#233943,#233951,#233953,.T.); +#233951 = VERTEX_POINT('',#233952); +#233952 = CARTESIAN_POINT('',(130.327921,-54.325466,1.585)); +#233953 = CIRCLE('',#233954,6.499937665136E-02); +#233954 = AXIS2_PLACEMENT_3D('',#233955,#233956,#233957); +#233955 = CARTESIAN_POINT('',(130.37388218097,-54.37142781902,1.585)); +#233956 = DIRECTION('',(-0.,0.,-1.)); +#233957 = DIRECTION('',(0.707096304454,-0.707117257763,-0.)); +#233958 = ORIENTED_EDGE('',*,*,#233959,.T.); +#233959 = EDGE_CURVE('',#233951,#233960,#233962,.T.); +#233960 = VERTEX_POINT('',#233961); +#233961 = CARTESIAN_POINT('',(130.363319,-54.290068,1.585)); +#233962 = LINE('',#233963,#233964); +#233963 = CARTESIAN_POINT('',(130.327921,-54.325466,1.585)); +#233964 = VECTOR('',#233965,1.); +#233965 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#233966 = ORIENTED_EDGE('',*,*,#233967,.T.); +#233967 = EDGE_CURVE('',#233960,#233968,#233970,.T.); +#233968 = VERTEX_POINT('',#233969); +#233969 = CARTESIAN_POINT('',(130.363319,-53.98136,1.585)); +#233970 = CIRCLE('',#233971,0.277419178293); +#233971 = AXIS2_PLACEMENT_3D('',#233972,#233973,#233974); +#233972 = CARTESIAN_POINT('',(130.132806,-54.135714,1.585)); +#233973 = DIRECTION('',(0.,-0.,1.)); +#233974 = DIRECTION('',(0.830919482272,-0.556392679661,-0.)); +#233975 = ORIENTED_EDGE('',*,*,#233976,.T.); +#233976 = EDGE_CURVE('',#233968,#233977,#233979,.T.); +#233977 = VERTEX_POINT('',#233978); +#233978 = CARTESIAN_POINT('',(130.335379,-53.95342,1.585)); +#233979 = LINE('',#233980,#233981); +#233980 = CARTESIAN_POINT('',(130.363319,-53.98136,1.585)); +#233981 = VECTOR('',#233982,1.); +#233982 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233983 = ORIENTED_EDGE('',*,*,#233984,.T.); +#233984 = EDGE_CURVE('',#233977,#233985,#233987,.T.); +#233985 = VERTEX_POINT('',#233986); +#233986 = CARTESIAN_POINT('',(130.026671,-53.95342,1.585)); +#233987 = CIRCLE('',#233988,0.277419178293); +#233988 = AXIS2_PLACEMENT_3D('',#233989,#233990,#233991); +#233989 = CARTESIAN_POINT('',(130.181025,-54.183933,1.585)); +#233990 = DIRECTION('',(0.,0.,1.)); +#233991 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#233992 = ORIENTED_EDGE('',*,*,#233993,.T.); +#233993 = EDGE_CURVE('',#233985,#233994,#233996,.T.); +#233994 = VERTEX_POINT('',#233995); +#233995 = CARTESIAN_POINT('',(129.998733,-53.981358,1.585)); +#233996 = LINE('',#233997,#233998); +#233997 = CARTESIAN_POINT('',(130.026671,-53.95342,1.585)); +#233998 = VECTOR('',#233999,1.); +#233999 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#234000 = ORIENTED_EDGE('',*,*,#234001,.T.); +#234001 = EDGE_CURVE('',#233994,#234002,#234004,.T.); +#234002 = VERTEX_POINT('',#234003); +#234003 = CARTESIAN_POINT('',(129.998732,-54.290068,1.585)); +#234004 = CIRCLE('',#234005,0.277420975587); +#234005 = AXIS2_PLACEMENT_3D('',#234006,#234007,#234008); +#234006 = CARTESIAN_POINT('',(130.2292469934,-54.1357137467,1.585)); +#234007 = DIRECTION('',(0.,0.,1.)); +#234008 = DIRECTION('',(-0.830917679953,0.556395371244,0.)); +#234009 = ORIENTED_EDGE('',*,*,#234010,.T.); +#234010 = EDGE_CURVE('',#234002,#234011,#234013,.T.); +#234011 = VERTEX_POINT('',#234012); +#234012 = CARTESIAN_POINT('',(130.03413,-54.325466,1.585)); +#234013 = LINE('',#234014,#234015); +#234014 = CARTESIAN_POINT('',(129.998732,-54.290068,1.585)); +#234015 = VECTOR('',#234016,1.); +#234016 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#234017 = ORIENTED_EDGE('',*,*,#234018,.T.); +#234018 = EDGE_CURVE('',#234011,#234019,#234021,.T.); +#234019 = VERTEX_POINT('',#234020); +#234020 = CARTESIAN_POINT('',(129.981701,-54.436105,1.585)); +#234021 = CIRCLE('',#234022,6.499980032118E-02); +#234022 = AXIS2_PLACEMENT_3D('',#234023,#234024,#234025); +#234023 = CARTESIAN_POINT('',(129.98816812219,-54.37142772136,1.585)); +#234024 = DIRECTION('',(0.,0.,-1.)); +#234025 = DIRECTION('',(0.707107984622,0.707105577749,0.)); +#234026 = ORIENTED_EDGE('',*,*,#234027,.T.); +#234027 = EDGE_CURVE('',#234019,#234028,#234030,.T.); +#234028 = VERTEX_POINT('',#234029); +#234029 = CARTESIAN_POINT('',(129.534723,-54.388623,1.585)); +#234030 = LINE('',#234031,#234032); +#234031 = CARTESIAN_POINT('',(129.981701,-54.436105,1.585)); +#234032 = VECTOR('',#234033,1.); +#234033 = DIRECTION('',(-0.994405014499,0.105634592527,0.)); +#234034 = ORIENTED_EDGE('',*,*,#234035,.T.); +#234035 = EDGE_CURVE('',#234028,#234036,#234038,.T.); +#234036 = VERTEX_POINT('',#234037); +#234037 = CARTESIAN_POINT('',(129.497368,-54.347346,1.585)); +#234038 = LINE('',#234039,#234040); +#234039 = CARTESIAN_POINT('',(129.534723,-54.388623,1.585)); +#234040 = VECTOR('',#234041,1.); +#234041 = DIRECTION('',(-0.671003626174,0.741454067128,0.)); +#234042 = ORIENTED_EDGE('',*,*,#234043,.T.); +#234043 = EDGE_CURVE('',#234036,#234044,#234046,.T.); +#234044 = VERTEX_POINT('',#234045); +#234045 = CARTESIAN_POINT('',(129.494597,-53.899999,1.585)); +#234046 = LINE('',#234047,#234048); +#234047 = CARTESIAN_POINT('',(129.497368,-54.347346,1.585)); +#234048 = VECTOR('',#234049,1.); +#234049 = DIRECTION('',(-6.194177765462E-03,0.999980815897,0.)); +#234050 = ORIENTED_EDGE('',*,*,#234051,.T.); +#234051 = EDGE_CURVE('',#234044,#234052,#234054,.T.); +#234052 = VERTEX_POINT('',#234053); +#234053 = CARTESIAN_POINT('',(129.624597,-53.899999,1.585)); +#234054 = CIRCLE('',#234055,6.500000000091E-02); +#234055 = AXIS2_PLACEMENT_3D('',#234056,#234057,#234058); +#234056 = CARTESIAN_POINT('',(129.559597,-53.89999934486,1.585)); +#234057 = DIRECTION('',(0.,0.,-1.)); +#234058 = DIRECTION('',(-0.999999999986,5.305658244297E-06,0.)); +#234059 = ORIENTED_EDGE('',*,*,#234060,.T.); +#234060 = EDGE_CURVE('',#234052,#234061,#234063,.T.); +#234061 = VERTEX_POINT('',#234062); +#234062 = CARTESIAN_POINT('',(129.624597,-54.269747,1.585)); +#234063 = LINE('',#234064,#234065); +#234064 = CARTESIAN_POINT('',(129.624597,-53.899999,1.585)); +#234065 = VECTOR('',#234066,1.); +#234066 = DIRECTION('',(0.,-1.,0.)); +#234067 = ORIENTED_EDGE('',*,*,#234068,.T.); +#234068 = EDGE_CURVE('',#234061,#234069,#234071,.T.); +#234069 = VERTEX_POINT('',#234070); +#234070 = CARTESIAN_POINT('',(129.854733,-54.29276,1.585)); +#234071 = LINE('',#234072,#234073); +#234072 = CARTESIAN_POINT('',(129.624597,-54.269747,1.585)); +#234073 = VECTOR('',#234074,1.); +#234074 = DIRECTION('',(0.99503744706,-9.950115049007E-02,0.)); +#234075 = ORIENTED_EDGE('',*,*,#234076,.T.); +#234076 = EDGE_CURVE('',#234069,#234077,#234079,.T.); +#234077 = VERTEX_POINT('',#234078); +#234078 = CARTESIAN_POINT('',(129.837618,-54.247465,1.585)); +#234079 = LINE('',#234080,#234081); +#234080 = CARTESIAN_POINT('',(129.854733,-54.29276,1.585)); +#234081 = VECTOR('',#234082,1.); +#234082 = DIRECTION('',(-0.353464827548,0.935447815587,0.)); +#234083 = ORIENTED_EDGE('',*,*,#234084,.T.); +#234084 = EDGE_CURVE('',#234077,#233891,#234085,.T.); +#234085 = LINE('',#234086,#234087); +#234086 = CARTESIAN_POINT('',(129.837618,-54.247465,1.585)); +#234087 = VECTOR('',#234088,1.); +#234088 = DIRECTION('',(1.177819480953E-02,0.999930634658,0.)); +#234089 = PLANE('',#234090); +#234090 = AXIS2_PLACEMENT_3D('',#234091,#234092,#234093); +#234091 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234092 = DIRECTION('',(0.,0.,1.)); +#234093 = DIRECTION('',(1.,0.,-0.)); +#234094 = SHELL_BASED_SURFACE_MODEL('',(#234095)); +#234095 = OPEN_SHELL('',(#234096)); +#234096 = ADVANCED_FACE('',(#234097,#234199),#234267,.T.); +#234097 = FACE_BOUND('',#234098,.F.); +#234098 = EDGE_LOOP('',(#234099,#234110,#234118,#234126,#234134,#234143, + #234151,#234159,#234168,#234176,#234185,#234193)); +#234099 = ORIENTED_EDGE('',*,*,#234100,.T.); +#234100 = EDGE_CURVE('',#234101,#234103,#234105,.T.); +#234101 = VERTEX_POINT('',#234102); +#234102 = CARTESIAN_POINT('',(159.43527,-53.8623,1.585)); +#234103 = VERTEX_POINT('',#234104); +#234104 = CARTESIAN_POINT('',(159.431742,-53.775436,1.585)); +#234105 = CIRCLE('',#234106,7.226649079681E-02); +#234106 = AXIS2_PLACEMENT_3D('',#234107,#234108,#234109); +#234107 = CARTESIAN_POINT('',(159.49119054153,-53.81652512996,1.585)); +#234108 = DIRECTION('',(0.,0.,-1.)); +#234109 = DIRECTION('',(-0.773810114734,-0.633417639741,-0.)); +#234110 = ORIENTED_EDGE('',*,*,#234111,.T.); +#234111 = EDGE_CURVE('',#234103,#234112,#234114,.T.); +#234112 = VERTEX_POINT('',#234113); +#234113 = CARTESIAN_POINT('',(159.452434,-53.754744,1.585)); +#234114 = LINE('',#234115,#234116); +#234115 = CARTESIAN_POINT('',(159.431742,-53.775436,1.585)); +#234116 = VECTOR('',#234117,1.); +#234117 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#234118 = ORIENTED_EDGE('',*,*,#234119,.T.); +#234119 = EDGE_CURVE('',#234112,#234120,#234122,.T.); +#234120 = VERTEX_POINT('',#234121); +#234121 = CARTESIAN_POINT('',(159.494102,-53.742104,1.585)); +#234122 = LINE('',#234123,#234124); +#234123 = CARTESIAN_POINT('',(159.452434,-53.754744,1.585)); +#234124 = VECTOR('',#234125,1.); +#234125 = DIRECTION('',(0.956939376321,0.29028783999,0.)); +#234126 = ORIENTED_EDGE('',*,*,#234127,.T.); +#234127 = EDGE_CURVE('',#234120,#234128,#234130,.T.); +#234128 = VERTEX_POINT('',#234129); +#234129 = CARTESIAN_POINT('',(160.508734,-53.743545,1.585)); +#234130 = LINE('',#234131,#234132); +#234131 = CARTESIAN_POINT('',(159.494102,-53.742104,1.585)); +#234132 = VECTOR('',#234133,1.); +#234133 = DIRECTION('',(0.99999899149,-1.420217918158E-03,0.)); +#234134 = ORIENTED_EDGE('',*,*,#234135,.T.); +#234135 = EDGE_CURVE('',#234128,#234136,#234138,.T.); +#234136 = VERTEX_POINT('',#234137); +#234137 = CARTESIAN_POINT('',(160.494102,-53.892104,1.585)); +#234138 = CIRCLE('',#234139,7.500006711464E-02); +#234139 = AXIS2_PLACEMENT_3D('',#234140,#234141,#234142); +#234140 = CARTESIAN_POINT('',(160.49410206711,-53.81710393288,1.585)); +#234141 = DIRECTION('',(0.,0.,-1.)); +#234142 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#234143 = ORIENTED_EDGE('',*,*,#234144,.T.); +#234144 = EDGE_CURVE('',#234136,#234145,#234147,.T.); +#234145 = VERTEX_POINT('',#234146); +#234146 = CARTESIAN_POINT('',(160.233106,-53.892532,1.585)); +#234147 = LINE('',#234148,#234149); +#234148 = CARTESIAN_POINT('',(160.494102,-53.892104,1.585)); +#234149 = VECTOR('',#234150,1.); +#234150 = DIRECTION('',(-0.999998655413,-1.639869670478E-03,0.)); +#234151 = ORIENTED_EDGE('',*,*,#234152,.T.); +#234152 = EDGE_CURVE('',#234145,#234153,#234155,.T.); +#234153 = VERTEX_POINT('',#234154); +#234154 = CARTESIAN_POINT('',(160.233106,-54.122628,1.585)); +#234155 = LINE('',#234156,#234157); +#234156 = CARTESIAN_POINT('',(160.233106,-53.892532,1.585)); +#234157 = VECTOR('',#234158,1.); +#234158 = DIRECTION('',(0.,-1.,0.)); +#234159 = ORIENTED_EDGE('',*,*,#234160,.T.); +#234160 = EDGE_CURVE('',#234153,#234161,#234163,.T.); +#234161 = VERTEX_POINT('',#234162); +#234162 = CARTESIAN_POINT('',(159.984924,-54.366853,1.585)); +#234163 = CIRCLE('',#234164,0.348632713765); +#234164 = AXIS2_PLACEMENT_3D('',#234165,#234166,#234167); +#234165 = CARTESIAN_POINT('',(159.89715597394,-54.02944887627,1.585)); +#234166 = DIRECTION('',(0.,0.,-1.)); +#234167 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#234168 = ORIENTED_EDGE('',*,*,#234169,.T.); +#234169 = EDGE_CURVE('',#234161,#234170,#234172,.T.); +#234170 = VERTEX_POINT('',#234171); +#234171 = CARTESIAN_POINT('',(159.664768,-54.365631,1.585)); +#234172 = LINE('',#234173,#234174); +#234173 = CARTESIAN_POINT('',(159.984924,-54.366853,1.585)); +#234174 = VECTOR('',#234175,1.); +#234175 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#234176 = ORIENTED_EDGE('',*,*,#234177,.T.); +#234177 = EDGE_CURVE('',#234170,#234178,#234180,.T.); +#234178 = VERTEX_POINT('',#234179); +#234179 = CARTESIAN_POINT('',(159.420543,-54.11745,1.585)); +#234180 = CIRCLE('',#234181,0.348628078749); +#234181 = AXIS2_PLACEMENT_3D('',#234182,#234183,#234184); +#234182 = CARTESIAN_POINT('',(159.7579430302,-54.02968464857,1.585)); +#234183 = DIRECTION('',(0.,0.,-1.)); +#234184 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#234185 = ORIENTED_EDGE('',*,*,#234186,.T.); +#234186 = EDGE_CURVE('',#234178,#234187,#234189,.T.); +#234187 = VERTEX_POINT('',#234188); +#234188 = CARTESIAN_POINT('',(159.421765,-53.892533,1.585)); +#234189 = LINE('',#234190,#234191); +#234190 = CARTESIAN_POINT('',(159.420543,-54.11745,1.585)); +#234191 = VECTOR('',#234192,1.); +#234192 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#234193 = ORIENTED_EDGE('',*,*,#234194,.T.); +#234194 = EDGE_CURVE('',#234187,#234101,#234195,.T.); +#234195 = LINE('',#234196,#234197); +#234196 = CARTESIAN_POINT('',(159.421765,-53.892533,1.585)); +#234197 = VECTOR('',#234198,1.); +#234198 = DIRECTION('',(0.407855431141,0.913046519784,0.)); +#234199 = FACE_BOUND('',#234200,.F.); +#234200 = EDGE_LOOP('',(#234201,#234211,#234219,#234227,#234235,#234244, + #234252,#234261)); +#234201 = ORIENTED_EDGE('',*,*,#234202,.T.); +#234202 = EDGE_CURVE('',#234203,#234205,#234207,.T.); +#234203 = VERTEX_POINT('',#234204); +#234204 = CARTESIAN_POINT('',(160.085769,-53.930047,1.585)); +#234205 = VERTEX_POINT('',#234206); +#234206 = CARTESIAN_POINT('',(160.066797,-53.892104,1.585)); +#234207 = LINE('',#234208,#234209); +#234208 = CARTESIAN_POINT('',(160.085769,-53.930047,1.585)); +#234209 = VECTOR('',#234210,1.); +#234210 = DIRECTION('',(-0.447223024592,0.894422476392,0.)); +#234211 = ORIENTED_EDGE('',*,*,#234212,.T.); +#234212 = EDGE_CURVE('',#234205,#234213,#234215,.T.); +#234213 = VERTEX_POINT('',#234214); +#234214 = CARTESIAN_POINT('',(159.588074,-53.892104,1.585)); +#234215 = LINE('',#234216,#234217); +#234216 = CARTESIAN_POINT('',(160.066797,-53.892104,1.585)); +#234217 = VECTOR('',#234218,1.); +#234218 = DIRECTION('',(-1.,0.,0.)); +#234219 = ORIENTED_EDGE('',*,*,#234220,.T.); +#234220 = EDGE_CURVE('',#234213,#234221,#234223,.T.); +#234221 = VERTEX_POINT('',#234222); +#234222 = CARTESIAN_POINT('',(159.569102,-53.930047,1.585)); +#234223 = LINE('',#234224,#234225); +#234224 = CARTESIAN_POINT('',(159.588074,-53.892104,1.585)); +#234225 = VECTOR('',#234226,1.); +#234226 = DIRECTION('',(-0.447223024593,-0.894422476391,0.)); +#234227 = ORIENTED_EDGE('',*,*,#234228,.T.); +#234228 = EDGE_CURVE('',#234221,#234229,#234231,.T.); +#234229 = VERTEX_POINT('',#234230); +#234230 = CARTESIAN_POINT('',(159.569102,-54.085113,1.585)); +#234231 = LINE('',#234232,#234233); +#234232 = CARTESIAN_POINT('',(159.569102,-53.930047,1.585)); +#234233 = VECTOR('',#234234,1.); +#234234 = DIRECTION('',(0.,-1.,0.)); +#234235 = ORIENTED_EDGE('',*,*,#234236,.T.); +#234236 = EDGE_CURVE('',#234229,#234237,#234239,.T.); +#234237 = VERTEX_POINT('',#234238); +#234238 = CARTESIAN_POINT('',(159.702283,-54.218294,1.585)); +#234239 = CIRCLE('',#234240,0.18686440374); +#234240 = AXIS2_PLACEMENT_3D('',#234241,#234242,#234243); +#234241 = CARTESIAN_POINT('',(159.749819,-54.037577,1.585)); +#234242 = DIRECTION('',(0.,0.,1.)); +#234243 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#234244 = ORIENTED_EDGE('',*,*,#234245,.T.); +#234245 = EDGE_CURVE('',#234237,#234246,#234248,.T.); +#234246 = VERTEX_POINT('',#234247); +#234247 = CARTESIAN_POINT('',(159.952587,-54.218294,1.585)); +#234248 = LINE('',#234249,#234250); +#234249 = CARTESIAN_POINT('',(159.702283,-54.218294,1.585)); +#234250 = VECTOR('',#234251,1.); +#234251 = DIRECTION('',(1.,0.,0.)); +#234252 = ORIENTED_EDGE('',*,*,#234253,.T.); +#234253 = EDGE_CURVE('',#234246,#234254,#234256,.T.); +#234254 = VERTEX_POINT('',#234255); +#234255 = CARTESIAN_POINT('',(160.085769,-54.085113,1.585)); +#234256 = CIRCLE('',#234257,0.186872595955); +#234257 = AXIS2_PLACEMENT_3D('',#234258,#234259,#234260); +#234258 = CARTESIAN_POINT('',(159.90504536766,-54.03757001068,1.585)); +#234259 = DIRECTION('',(0.,0.,1.)); +#234260 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#234261 = ORIENTED_EDGE('',*,*,#234262,.T.); +#234262 = EDGE_CURVE('',#234254,#234203,#234263,.T.); +#234263 = LINE('',#234264,#234265); +#234264 = CARTESIAN_POINT('',(160.085769,-54.085113,1.585)); +#234265 = VECTOR('',#234266,1.); +#234266 = DIRECTION('',(0.,1.,0.)); +#234267 = PLANE('',#234268); +#234268 = AXIS2_PLACEMENT_3D('',#234269,#234270,#234271); +#234269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234270 = DIRECTION('',(0.,0.,1.)); +#234271 = DIRECTION('',(1.,0.,-0.)); +#234272 = SHELL_BASED_SURFACE_MODEL('',(#234273)); +#234273 = OPEN_SHELL('',(#234274)); +#234274 = ADVANCED_FACE('',(#234275),#234352,.T.); +#234275 = FACE_BOUND('',#234276,.F.); +#234276 = EDGE_LOOP('',(#234277,#234288,#234296,#234304,#234313,#234321, + #234329,#234338,#234346)); +#234277 = ORIENTED_EDGE('',*,*,#234278,.T.); +#234278 = EDGE_CURVE('',#234279,#234281,#234283,.T.); +#234279 = VERTEX_POINT('',#234280); +#234280 = CARTESIAN_POINT('',(147.279545,-53.667983,1.585)); +#234281 = VERTEX_POINT('',#234282); +#234282 = CARTESIAN_POINT('',(147.404597,-53.692857,1.585)); +#234283 = CIRCLE('',#234284,6.499988811647E-02); +#234284 = AXIS2_PLACEMENT_3D('',#234285,#234286,#234287); +#234285 = CARTESIAN_POINT('',(147.33959711188,-53.6928572701,1.585)); +#234286 = DIRECTION('',(0.,0.,-1.)); +#234287 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#234288 = ORIENTED_EDGE('',*,*,#234289,.T.); +#234289 = EDGE_CURVE('',#234281,#234290,#234292,.T.); +#234290 = VERTEX_POINT('',#234291); +#234291 = CARTESIAN_POINT('',(147.404597,-53.884999,1.585)); +#234292 = LINE('',#234293,#234294); +#234293 = CARTESIAN_POINT('',(147.404597,-53.692857,1.585)); +#234294 = VECTOR('',#234295,1.); +#234295 = DIRECTION('',(0.,-1.,0.)); +#234296 = ORIENTED_EDGE('',*,*,#234297,.T.); +#234297 = EDGE_CURVE('',#234290,#234298,#234300,.T.); +#234298 = VERTEX_POINT('',#234299); +#234299 = CARTESIAN_POINT('',(148.239597,-53.884999,1.585)); +#234300 = LINE('',#234301,#234302); +#234301 = CARTESIAN_POINT('',(147.404597,-53.884999,1.585)); +#234302 = VECTOR('',#234303,1.); +#234303 = DIRECTION('',(1.,0.,0.)); +#234304 = ORIENTED_EDGE('',*,*,#234305,.T.); +#234305 = EDGE_CURVE('',#234298,#234306,#234308,.T.); +#234306 = VERTEX_POINT('',#234307); +#234307 = CARTESIAN_POINT('',(148.239597,-54.014999,1.585)); +#234308 = CIRCLE('',#234309,6.500000000092E-02); +#234309 = AXIS2_PLACEMENT_3D('',#234310,#234311,#234312); +#234310 = CARTESIAN_POINT('',(148.23959665513,-53.949999,1.585)); +#234311 = DIRECTION('',(0.,0.,-1.)); +#234312 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#234313 = ORIENTED_EDGE('',*,*,#234314,.T.); +#234314 = EDGE_CURVE('',#234306,#234315,#234317,.T.); +#234315 = VERTEX_POINT('',#234316); +#234316 = CARTESIAN_POINT('',(147.404597,-54.014999,1.585)); +#234317 = LINE('',#234318,#234319); +#234318 = CARTESIAN_POINT('',(148.239597,-54.014999,1.585)); +#234319 = VECTOR('',#234320,1.); +#234320 = DIRECTION('',(-1.,0.,0.)); +#234321 = ORIENTED_EDGE('',*,*,#234322,.T.); +#234322 = EDGE_CURVE('',#234315,#234323,#234325,.T.); +#234323 = VERTEX_POINT('',#234324); +#234324 = CARTESIAN_POINT('',(147.404597,-54.207142,1.585)); +#234325 = LINE('',#234326,#234327); +#234326 = CARTESIAN_POINT('',(147.404597,-54.014999,1.585)); +#234327 = VECTOR('',#234328,1.); +#234328 = DIRECTION('',(0.,-1.,0.)); +#234329 = ORIENTED_EDGE('',*,*,#234330,.T.); +#234330 = EDGE_CURVE('',#234323,#234331,#234333,.T.); +#234331 = VERTEX_POINT('',#234332); +#234332 = CARTESIAN_POINT('',(147.274597,-54.207142,1.585)); +#234333 = CIRCLE('',#234334,6.500000000091E-02); +#234334 = AXIS2_PLACEMENT_3D('',#234335,#234336,#234337); +#234335 = CARTESIAN_POINT('',(147.339597,-54.20714165513,1.585)); +#234336 = DIRECTION('',(-0.,0.,-1.)); +#234337 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#234338 = ORIENTED_EDGE('',*,*,#234339,.T.); +#234339 = EDGE_CURVE('',#234331,#234340,#234342,.T.); +#234340 = VERTEX_POINT('',#234341); +#234341 = CARTESIAN_POINT('',(147.274597,-53.692857,1.585)); +#234342 = LINE('',#234343,#234344); +#234343 = CARTESIAN_POINT('',(147.274597,-54.207142,1.585)); +#234344 = VECTOR('',#234345,1.); +#234345 = DIRECTION('',(0.,1.,0.)); +#234346 = ORIENTED_EDGE('',*,*,#234347,.T.); +#234347 = EDGE_CURVE('',#234340,#234279,#234348,.T.); +#234348 = LINE('',#234349,#234350); +#234349 = CARTESIAN_POINT('',(147.274597,-53.692857,1.585)); +#234350 = VECTOR('',#234351,1.); +#234351 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#234352 = PLANE('',#234353); +#234353 = AXIS2_PLACEMENT_3D('',#234354,#234355,#234356); +#234354 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234355 = DIRECTION('',(0.,0.,1.)); +#234356 = DIRECTION('',(1.,0.,-0.)); +#234357 = SHELL_BASED_SURFACE_MODEL('',(#234358)); +#234358 = OPEN_SHELL('',(#234359)); +#234359 = ADVANCED_FACE('',(#234360),#234494,.T.); +#234360 = FACE_BOUND('',#234361,.F.); +#234361 = EDGE_LOOP('',(#234362,#234372,#234380,#234389,#234397,#234405, + #234414,#234422,#234431,#234439,#234447,#234455,#234463,#234472, + #234480,#234488)); +#234362 = ORIENTED_EDGE('',*,*,#234363,.T.); +#234363 = EDGE_CURVE('',#234364,#234366,#234368,.T.); +#234364 = VERTEX_POINT('',#234365); +#234365 = CARTESIAN_POINT('',(192.231062,-53.067441,1.585)); +#234366 = VERTEX_POINT('',#234367); +#234367 = CARTESIAN_POINT('',(192.269518,-53.04686,1.585)); +#234368 = LINE('',#234369,#234370); +#234369 = CARTESIAN_POINT('',(192.231062,-53.067441,1.585)); +#234370 = VECTOR('',#234371,1.); +#234371 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#234372 = ORIENTED_EDGE('',*,*,#234373,.T.); +#234373 = EDGE_CURVE('',#234366,#234374,#234376,.T.); +#234374 = VERTEX_POINT('',#234375); +#234375 = CARTESIAN_POINT('',(192.291355,-53.04686,1.585)); +#234376 = LINE('',#234377,#234378); +#234377 = CARTESIAN_POINT('',(192.269518,-53.04686,1.585)); +#234378 = VECTOR('',#234379,1.); +#234379 = DIRECTION('',(1.,0.,0.)); +#234380 = ORIENTED_EDGE('',*,*,#234381,.T.); +#234381 = EDGE_CURVE('',#234374,#234382,#234384,.T.); +#234382 = VERTEX_POINT('',#234383); +#234383 = CARTESIAN_POINT('',(192.35915,-53.120419,1.585)); +#234384 = CIRCLE('',#234385,7.21689809423E-02); +#234385 = AXIS2_PLACEMENT_3D('',#234386,#234387,#234388); +#234386 = CARTESIAN_POINT('',(192.28699706389,-53.11889728342,1.585)); +#234387 = DIRECTION('',(0.,0.,-1.)); +#234388 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#234389 = ORIENTED_EDGE('',*,*,#234390,.T.); +#234390 = EDGE_CURVE('',#234382,#234391,#234393,.T.); +#234391 = VERTEX_POINT('',#234392); +#234392 = CARTESIAN_POINT('',(192.35915,-54.045419,1.585)); +#234393 = LINE('',#234394,#234395); +#234394 = CARTESIAN_POINT('',(192.35915,-53.120419,1.585)); +#234395 = VECTOR('',#234396,1.); +#234396 = DIRECTION('',(0.,-1.,0.)); +#234397 = ORIENTED_EDGE('',*,*,#234398,.T.); +#234398 = EDGE_CURVE('',#234391,#234399,#234401,.T.); +#234399 = VERTEX_POINT('',#234400); +#234400 = CARTESIAN_POINT('',(192.584496,-54.04686,1.585)); +#234401 = LINE('',#234402,#234403); +#234402 = CARTESIAN_POINT('',(192.35915,-54.045419,1.585)); +#234403 = VECTOR('',#234404,1.); +#234404 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#234405 = ORIENTED_EDGE('',*,*,#234406,.T.); +#234406 = EDGE_CURVE('',#234399,#234407,#234409,.T.); +#234407 = VERTEX_POINT('',#234408); +#234408 = CARTESIAN_POINT('',(192.569864,-54.195419,1.585)); +#234409 = CIRCLE('',#234410,7.500006711464E-02); +#234410 = AXIS2_PLACEMENT_3D('',#234411,#234412,#234413); +#234411 = CARTESIAN_POINT('',(192.56986406711,-54.12041893288,1.585)); +#234412 = DIRECTION('',(0.,0.,-1.)); +#234413 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#234414 = ORIENTED_EDGE('',*,*,#234415,.T.); +#234415 = EDGE_CURVE('',#234407,#234416,#234418,.T.); +#234416 = VERTEX_POINT('',#234417); +#234417 = CARTESIAN_POINT('',(191.983804,-54.193978,1.585)); +#234418 = LINE('',#234419,#234420); +#234419 = CARTESIAN_POINT('',(192.569864,-54.195419,1.585)); +#234420 = VECTOR('',#234421,1.); +#234421 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#234422 = ORIENTED_EDGE('',*,*,#234423,.T.); +#234423 = EDGE_CURVE('',#234416,#234424,#234426,.T.); +#234424 = VERTEX_POINT('',#234425); +#234425 = CARTESIAN_POINT('',(191.998436,-54.045419,1.585)); +#234426 = CIRCLE('',#234427,7.500006711464E-02); +#234427 = AXIS2_PLACEMENT_3D('',#234428,#234429,#234430); +#234428 = CARTESIAN_POINT('',(191.99843593288,-54.12041906711,1.585)); +#234429 = DIRECTION('',(0.,0.,-1.)); +#234430 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#234431 = ORIENTED_EDGE('',*,*,#234432,.T.); +#234432 = EDGE_CURVE('',#234424,#234433,#234435,.T.); +#234433 = VERTEX_POINT('',#234434); +#234434 = CARTESIAN_POINT('',(192.20915,-54.045419,1.585)); +#234435 = LINE('',#234436,#234437); +#234436 = CARTESIAN_POINT('',(191.998436,-54.045419,1.585)); +#234437 = VECTOR('',#234438,1.); +#234438 = DIRECTION('',(1.,0.,0.)); +#234439 = ORIENTED_EDGE('',*,*,#234440,.T.); +#234440 = EDGE_CURVE('',#234433,#234441,#234443,.T.); +#234441 = VERTEX_POINT('',#234442); +#234442 = CARTESIAN_POINT('',(192.20915,-53.349104,1.585)); +#234443 = LINE('',#234444,#234445); +#234444 = CARTESIAN_POINT('',(192.20915,-54.045419,1.585)); +#234445 = VECTOR('',#234446,1.); +#234446 = DIRECTION('',(0.,1.,0.)); +#234447 = ORIENTED_EDGE('',*,*,#234448,.T.); +#234448 = EDGE_CURVE('',#234441,#234449,#234451,.T.); +#234449 = VERTEX_POINT('',#234450); +#234450 = CARTESIAN_POINT('',(192.133514,-53.421631,1.585)); +#234451 = LINE('',#234452,#234453); +#234452 = CARTESIAN_POINT('',(192.20915,-53.349104,1.585)); +#234453 = VECTOR('',#234454,1.); +#234454 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#234455 = ORIENTED_EDGE('',*,*,#234456,.T.); +#234456 = EDGE_CURVE('',#234449,#234457,#234459,.T.); +#234457 = VERTEX_POINT('',#234458); +#234458 = CARTESIAN_POINT('',(192.018245,-53.47847,1.585)); +#234459 = LINE('',#234460,#234461); +#234460 = CARTESIAN_POINT('',(192.133514,-53.421631,1.585)); +#234461 = VECTOR('',#234462,1.); +#234462 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#234463 = ORIENTED_EDGE('',*,*,#234464,.T.); +#234464 = EDGE_CURVE('',#234457,#234465,#234467,.T.); +#234465 = VERTEX_POINT('',#234466); +#234466 = CARTESIAN_POINT('',(191.964895,-53.339051,1.585)); +#234467 = CIRCLE('',#234468,7.500005272362E-02); +#234468 = AXIS2_PLACEMENT_3D('',#234469,#234470,#234471); +#234469 = CARTESIAN_POINT('',(191.99843555676,-53.40613332972,1.585)); +#234470 = DIRECTION('',(0.,0.,-1.)); +#234471 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#234472 = ORIENTED_EDGE('',*,*,#234473,.T.); +#234473 = EDGE_CURVE('',#234465,#234474,#234476,.T.); +#234474 = VERTEX_POINT('',#234475); +#234475 = CARTESIAN_POINT('',(192.049247,-53.296875,1.585)); +#234476 = LINE('',#234477,#234478); +#234477 = CARTESIAN_POINT('',(191.964895,-53.339051,1.585)); +#234478 = VECTOR('',#234479,1.); +#234479 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#234480 = ORIENTED_EDGE('',*,*,#234481,.T.); +#234481 = EDGE_CURVE('',#234474,#234482,#234484,.T.); +#234482 = VERTEX_POINT('',#234483); +#234483 = CARTESIAN_POINT('',(192.130626,-53.215496,1.585)); +#234484 = LINE('',#234485,#234486); +#234485 = CARTESIAN_POINT('',(192.049247,-53.296875,1.585)); +#234486 = VECTOR('',#234487,1.); +#234487 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#234488 = ORIENTED_EDGE('',*,*,#234489,.T.); +#234489 = EDGE_CURVE('',#234482,#234364,#234490,.T.); +#234490 = LINE('',#234491,#234492); +#234491 = CARTESIAN_POINT('',(192.130626,-53.215496,1.585)); +#234492 = VECTOR('',#234493,1.); +#234493 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#234494 = PLANE('',#234495); +#234495 = AXIS2_PLACEMENT_3D('',#234496,#234497,#234498); +#234496 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234497 = DIRECTION('',(0.,0.,1.)); +#234498 = DIRECTION('',(1.,0.,-0.)); +#234499 = SHELL_BASED_SURFACE_MODEL('',(#234500)); +#234500 = OPEN_SHELL('',(#234501)); +#234501 = ADVANCED_FACE('',(#234502),#234620,.T.); +#234502 = FACE_BOUND('',#234503,.F.); +#234503 = EDGE_LOOP('',(#234504,#234515,#234523,#234531,#234540,#234548, + #234556,#234565,#234573,#234581,#234589,#234598,#234606,#234614)); +#234504 = ORIENTED_EDGE('',*,*,#234505,.T.); +#234505 = EDGE_CURVE('',#234506,#234508,#234510,.T.); +#234506 = VERTEX_POINT('',#234507); +#234507 = CARTESIAN_POINT('',(191.004387,-53.058059,1.585)); +#234508 = VERTEX_POINT('',#234509); +#234509 = CARTESIAN_POINT('',(191.121055,-53.120419,1.585)); +#234510 = CIRCLE('',#234511,7.500000000003E-02); +#234511 = AXIS2_PLACEMENT_3D('',#234512,#234513,#234514); +#234512 = CARTESIAN_POINT('',(191.046055,-53.12041906555,1.585)); +#234513 = DIRECTION('',(0.,0.,-1.)); +#234514 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#234515 = ORIENTED_EDGE('',*,*,#234516,.T.); +#234516 = EDGE_CURVE('',#234508,#234517,#234519,.T.); +#234517 = VERTEX_POINT('',#234518); +#234518 = CARTESIAN_POINT('',(191.121055,-53.510781,1.585)); +#234519 = LINE('',#234520,#234521); +#234520 = CARTESIAN_POINT('',(191.121055,-53.120419,1.585)); +#234521 = VECTOR('',#234522,1.); +#234522 = DIRECTION('',(0.,-1.,0.)); +#234523 = ORIENTED_EDGE('',*,*,#234524,.T.); +#234524 = EDGE_CURVE('',#234517,#234525,#234527,.T.); +#234525 = VERTEX_POINT('',#234526); +#234526 = CARTESIAN_POINT('',(191.575815,-53.058059,1.585)); +#234527 = LINE('',#234528,#234529); +#234528 = CARTESIAN_POINT('',(191.121055,-53.510781,1.585)); +#234529 = VECTOR('',#234530,1.); +#234530 = DIRECTION('',(0.70869299647,0.705516999621,0.)); +#234531 = ORIENTED_EDGE('',*,*,#234532,.T.); +#234532 = EDGE_CURVE('',#234525,#234533,#234535,.T.); +#234533 = VERTEX_POINT('',#234534); +#234534 = CARTESIAN_POINT('',(191.670516,-53.173452,1.585)); +#234535 = CIRCLE('',#234536,7.499996838527E-02); +#234536 = AXIS2_PLACEMENT_3D('',#234537,#234538,#234539); +#234537 = CARTESIAN_POINT('',(191.617483,-53.12041902753,1.585)); +#234538 = DIRECTION('',(0.,0.,-1.)); +#234539 = DIRECTION('',(-0.555573567524,0.831467384248,0.)); +#234540 = ORIENTED_EDGE('',*,*,#234541,.T.); +#234541 = EDGE_CURVE('',#234533,#234542,#234544,.T.); +#234542 = VERTEX_POINT('',#234543); +#234543 = CARTESIAN_POINT('',(191.28794,-53.556027,1.585)); +#234544 = LINE('',#234545,#234546); +#234545 = CARTESIAN_POINT('',(191.670516,-53.173452,1.585)); +#234546 = VECTOR('',#234547,1.); +#234547 = DIRECTION('',(-0.707107705326,-0.707105857046,0.)); +#234548 = ORIENTED_EDGE('',*,*,#234549,.T.); +#234549 = EDGE_CURVE('',#234542,#234550,#234552,.T.); +#234550 = VERTEX_POINT('',#234551); +#234551 = CARTESIAN_POINT('',(191.68511,-54.087989,1.585)); +#234552 = LINE('',#234553,#234554); +#234553 = CARTESIAN_POINT('',(191.28794,-53.556027,1.585)); +#234554 = VECTOR('',#234555,1.); +#234555 = DIRECTION('',(0.598261868875,-0.801300652845,0.)); +#234556 = ORIENTED_EDGE('',*,*,#234557,.T.); +#234557 = EDGE_CURVE('',#234550,#234558,#234560,.T.); +#234558 = VERTEX_POINT('',#234559); +#234559 = CARTESIAN_POINT('',(191.557483,-54.165419,1.585)); +#234560 = CIRCLE('',#234561,7.500042710847E-02); +#234561 = AXIS2_PLACEMENT_3D('',#234562,#234563,#234564); +#234562 = CARTESIAN_POINT('',(191.61748311876,-54.1204184465,1.585)); +#234563 = DIRECTION('',(0.,0.,-1.)); +#234564 = DIRECTION('',(0.901686614921,0.432390157695,0.)); +#234565 = ORIENTED_EDGE('',*,*,#234566,.T.); +#234566 = EDGE_CURVE('',#234558,#234567,#234569,.T.); +#234567 = VERTEX_POINT('',#234568); +#234568 = CARTESIAN_POINT('',(191.180797,-53.66317,1.585)); +#234569 = LINE('',#234570,#234571); +#234570 = CARTESIAN_POINT('',(191.557483,-54.165419,1.585)); +#234571 = VECTOR('',#234572,1.); +#234572 = DIRECTION('',(-0.599999235438,0.800000573421,0.)); +#234573 = ORIENTED_EDGE('',*,*,#234574,.T.); +#234574 = EDGE_CURVE('',#234567,#234575,#234577,.T.); +#234575 = VERTEX_POINT('',#234576); +#234576 = CARTESIAN_POINT('',(191.121055,-53.722913,1.585)); +#234577 = LINE('',#234578,#234579); +#234578 = CARTESIAN_POINT('',(191.180797,-53.66317,1.585)); +#234579 = VECTOR('',#234580,1.); +#234580 = DIRECTION('',(-0.707100863207,-0.707112699116,0.)); +#234581 = ORIENTED_EDGE('',*,*,#234582,.T.); +#234582 = EDGE_CURVE('',#234575,#234583,#234585,.T.); +#234583 = VERTEX_POINT('',#234584); +#234584 = CARTESIAN_POINT('',(191.119614,-54.135051,1.585)); +#234585 = LINE('',#234586,#234587); +#234586 = CARTESIAN_POINT('',(191.121055,-53.722913,1.585)); +#234587 = VECTOR('',#234588,1.); +#234588 = DIRECTION('',(-3.496380319442E-03,-0.999993887644,0.)); +#234589 = ORIENTED_EDGE('',*,*,#234590,.T.); +#234590 = EDGE_CURVE('',#234583,#234591,#234593,.T.); +#234591 = VERTEX_POINT('',#234592); +#234592 = CARTESIAN_POINT('',(190.971055,-54.120419,1.585)); +#234593 = CIRCLE('',#234594,7.500006711464E-02); +#234594 = AXIS2_PLACEMENT_3D('',#234595,#234596,#234597); +#234595 = CARTESIAN_POINT('',(191.04605506711,-54.12041906711,1.585)); +#234596 = DIRECTION('',(-0.,0.,-1.)); +#234597 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#234598 = ORIENTED_EDGE('',*,*,#234599,.T.); +#234599 = EDGE_CURVE('',#234591,#234600,#234602,.T.); +#234600 = VERTEX_POINT('',#234601); +#234601 = CARTESIAN_POINT('',(190.972496,-53.105787,1.585)); +#234602 = LINE('',#234603,#234604); +#234603 = CARTESIAN_POINT('',(190.971055,-54.120419,1.585)); +#234604 = VECTOR('',#234605,1.); +#234605 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#234606 = ORIENTED_EDGE('',*,*,#234607,.T.); +#234607 = EDGE_CURVE('',#234600,#234608,#234610,.T.); +#234608 = VERTEX_POINT('',#234609); +#234609 = CARTESIAN_POINT('',(190.983695,-53.078751,1.585)); +#234610 = LINE('',#234611,#234612); +#234611 = CARTESIAN_POINT('',(190.972496,-53.105787,1.585)); +#234612 = VECTOR('',#234613,1.); +#234613 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#234614 = ORIENTED_EDGE('',*,*,#234615,.T.); +#234615 = EDGE_CURVE('',#234608,#234506,#234616,.T.); +#234616 = LINE('',#234617,#234618); +#234617 = CARTESIAN_POINT('',(190.983695,-53.078751,1.585)); +#234618 = VECTOR('',#234619,1.); +#234619 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#234620 = PLANE('',#234621); +#234621 = AXIS2_PLACEMENT_3D('',#234622,#234623,#234624); +#234622 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234623 = DIRECTION('',(0.,0.,1.)); +#234624 = DIRECTION('',(1.,0.,-0.)); +#234625 = SHELL_BASED_SURFACE_MODEL('',(#234626)); +#234626 = OPEN_SHELL('',(#234627)); +#234627 = ADVANCED_FACE('',(#234628),#234869,.T.); +#234628 = FACE_BOUND('',#234629,.F.); +#234629 = EDGE_LOOP('',(#234630,#234641,#234649,#234657,#234665,#234673, + #234682,#234690,#234699,#234707,#234715,#234723,#234731,#234739, + #234747,#234756,#234764,#234772,#234780,#234788,#234797,#234805, + #234813,#234821,#234830,#234838,#234846,#234854,#234863)); +#234630 = ORIENTED_EDGE('',*,*,#234631,.T.); +#234631 = EDGE_CURVE('',#234632,#234634,#234636,.T.); +#234632 = VERTEX_POINT('',#234633); +#234633 = CARTESIAN_POINT('',(132.548882,-53.478571,1.585)); +#234634 = VERTEX_POINT('',#234635); +#234635 = CARTESIAN_POINT('',(132.613882,-53.413571,1.585)); +#234636 = CIRCLE('',#234637,6.500103935393E-02); +#234637 = AXIS2_PLACEMENT_3D('',#234638,#234639,#234640); +#234638 = CARTESIAN_POINT('',(132.61388303934,-53.47857203934,1.585)); +#234639 = DIRECTION('',(0.,0.,-1.)); +#234640 = DIRECTION('',(-0.999999999872,1.598967682012E-05,0.)); +#234641 = ORIENTED_EDGE('',*,*,#234642,.T.); +#234642 = EDGE_CURVE('',#234634,#234643,#234645,.T.); +#234643 = VERTEX_POINT('',#234644); +#234644 = CARTESIAN_POINT('',(132.913882,-53.413571,1.585)); +#234645 = LINE('',#234646,#234647); +#234646 = CARTESIAN_POINT('',(132.613882,-53.413571,1.585)); +#234647 = VECTOR('',#234648,1.); +#234648 = DIRECTION('',(1.,0.,0.)); +#234649 = ORIENTED_EDGE('',*,*,#234650,.T.); +#234650 = EDGE_CURVE('',#234643,#234651,#234653,.T.); +#234651 = VERTEX_POINT('',#234652); +#234652 = CARTESIAN_POINT('',(132.938756,-53.418519,1.585)); +#234653 = LINE('',#234654,#234655); +#234654 = CARTESIAN_POINT('',(132.913882,-53.413571,1.585)); +#234655 = VECTOR('',#234656,1.); +#234656 = DIRECTION('',(0.98078336573,-0.195099947481,0.)); +#234657 = ORIENTED_EDGE('',*,*,#234658,.T.); +#234658 = EDGE_CURVE('',#234651,#234659,#234661,.T.); +#234659 = VERTEX_POINT('',#234660); +#234660 = CARTESIAN_POINT('',(132.959843,-53.432609,1.585)); +#234661 = LINE('',#234662,#234663); +#234662 = CARTESIAN_POINT('',(132.938756,-53.418519,1.585)); +#234663 = VECTOR('',#234664,1.); +#234664 = DIRECTION('',(0.831467480074,-0.555573424112,0.)); +#234665 = ORIENTED_EDGE('',*,*,#234666,.T.); +#234666 = EDGE_CURVE('',#234659,#234667,#234669,.T.); +#234667 = VERTEX_POINT('',#234668); +#234668 = CARTESIAN_POINT('',(133.011003,-53.48789,1.585)); +#234669 = LINE('',#234670,#234671); +#234670 = CARTESIAN_POINT('',(132.959843,-53.432609,1.585)); +#234671 = VECTOR('',#234672,1.); +#234672 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#234673 = ORIENTED_EDGE('',*,*,#234674,.T.); +#234674 = EDGE_CURVE('',#234667,#234675,#234677,.T.); +#234675 = VERTEX_POINT('',#234676); +#234676 = CARTESIAN_POINT('',(133.010999,-53.897828,1.585)); +#234677 = CIRCLE('',#234678,0.409312568567); +#234678 = AXIS2_PLACEMENT_3D('',#234679,#234680,#234681); +#234679 = CARTESIAN_POINT('',(132.65670664807,-53.69285554294,1.585)); +#234680 = DIRECTION('',(0.,0.,-1.)); +#234681 = DIRECTION('',(0.865588743514,0.500755556236,0.)); +#234682 = ORIENTED_EDGE('',*,*,#234683,.T.); +#234683 = EDGE_CURVE('',#234675,#234684,#234686,.T.); +#234684 = VERTEX_POINT('',#234685); +#234685 = CARTESIAN_POINT('',(132.908322,-54.001751,1.585)); +#234686 = LINE('',#234687,#234688); +#234687 = CARTESIAN_POINT('',(133.010999,-53.897828,1.585)); +#234688 = VECTOR('',#234689,1.); +#234689 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#234690 = ORIENTED_EDGE('',*,*,#234691,.T.); +#234691 = EDGE_CURVE('',#234684,#234692,#234694,.T.); +#234692 = VERTEX_POINT('',#234693); +#234693 = CARTESIAN_POINT('',(132.469546,-54.098773,1.585)); +#234694 = CIRCLE('',#234695,0.675422176573); +#234695 = AXIS2_PLACEMENT_3D('',#234696,#234697,#234698); +#234696 = CARTESIAN_POINT('',(132.55141275007,-53.42833064465,1.585)); +#234697 = DIRECTION('',(0.,0.,-1.)); +#234698 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#234699 = ORIENTED_EDGE('',*,*,#234700,.T.); +#234700 = EDGE_CURVE('',#234692,#234701,#234703,.T.); +#234701 = VERTEX_POINT('',#234702); +#234702 = CARTESIAN_POINT('',(132.284813,-54.050995,1.585)); +#234703 = LINE('',#234704,#234705); +#234704 = CARTESIAN_POINT('',(132.469546,-54.098773,1.585)); +#234705 = VECTOR('',#234706,1.); +#234706 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#234707 = ORIENTED_EDGE('',*,*,#234708,.T.); +#234708 = EDGE_CURVE('',#234701,#234709,#234711,.T.); +#234709 = VERTEX_POINT('',#234710); +#234710 = CARTESIAN_POINT('',(132.182206,-53.995962,1.585)); +#234711 = LINE('',#234712,#234713); +#234712 = CARTESIAN_POINT('',(132.284813,-54.050995,1.585)); +#234713 = VECTOR('',#234714,1.); +#234714 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#234715 = ORIENTED_EDGE('',*,*,#234716,.T.); +#234716 = EDGE_CURVE('',#234709,#234717,#234719,.T.); +#234717 = VERTEX_POINT('',#234718); +#234718 = CARTESIAN_POINT('',(132.088191,-53.897824,1.585)); +#234719 = LINE('',#234720,#234721); +#234720 = CARTESIAN_POINT('',(132.182206,-53.995962,1.585)); +#234721 = VECTOR('',#234722,1.); +#234722 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#234723 = ORIENTED_EDGE('',*,*,#234724,.T.); +#234724 = EDGE_CURVE('',#234717,#234725,#234727,.T.); +#234725 = VERTEX_POINT('',#234726); +#234726 = CARTESIAN_POINT('',(132.03663,-53.745936,1.585)); +#234727 = LINE('',#234728,#234729); +#234728 = CARTESIAN_POINT('',(132.088191,-53.897824,1.585)); +#234729 = VECTOR('',#234730,1.); +#234730 = DIRECTION('',(-0.32145048656,0.946926388211,0.)); +#234731 = ORIENTED_EDGE('',*,*,#234732,.T.); +#234732 = EDGE_CURVE('',#234725,#234733,#234735,.T.); +#234733 = VERTEX_POINT('',#234734); +#234734 = CARTESIAN_POINT('',(132.037512,-53.592486,1.585)); +#234735 = LINE('',#234736,#234737); +#234736 = CARTESIAN_POINT('',(132.03663,-53.745936,1.585)); +#234737 = VECTOR('',#234738,1.); +#234738 = DIRECTION('',(5.747705643146E-03,0.999983481803,0.)); +#234739 = ORIENTED_EDGE('',*,*,#234740,.T.); +#234740 = EDGE_CURVE('',#234733,#234741,#234743,.T.); +#234741 = VERTEX_POINT('',#234742); +#234742 = CARTESIAN_POINT('',(132.084316,-53.492359,1.585)); +#234743 = LINE('',#234744,#234745); +#234744 = CARTESIAN_POINT('',(132.037512,-53.592486,1.585)); +#234745 = VECTOR('',#234746,1.); +#234746 = DIRECTION('',(0.423465384777,0.90591228488,0.)); +#234747 = ORIENTED_EDGE('',*,*,#234748,.T.); +#234748 = EDGE_CURVE('',#234741,#234749,#234751,.T.); +#234749 = VERTEX_POINT('',#234750); +#234750 = CARTESIAN_POINT('',(132.200592,-53.550497,1.585)); +#234751 = CIRCLE('',#234752,6.500026004258E-02); +#234752 = AXIS2_PLACEMENT_3D('',#234753,#234754,#234755); +#234753 = CARTESIAN_POINT('',(132.14245365279,-53.5214286944,1.585)); +#234754 = DIRECTION('',(0.,0.,-1.)); +#234755 = DIRECTION('',(-0.894421849364,0.447224278613,0.)); +#234756 = ORIENTED_EDGE('',*,*,#234757,.T.); +#234757 = EDGE_CURVE('',#234749,#234758,#234760,.T.); +#234758 = VERTEX_POINT('',#234759); +#234759 = CARTESIAN_POINT('',(132.164597,-53.622487,1.585)); +#234760 = LINE('',#234761,#234762); +#234761 = CARTESIAN_POINT('',(132.200592,-53.550497,1.585)); +#234762 = VECTOR('',#234763,1.); +#234763 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#234764 = ORIENTED_EDGE('',*,*,#234765,.T.); +#234765 = EDGE_CURVE('',#234758,#234766,#234768,.T.); +#234766 = VERTEX_POINT('',#234767); +#234767 = CARTESIAN_POINT('',(132.164597,-53.725167,1.585)); +#234768 = LINE('',#234769,#234770); +#234769 = CARTESIAN_POINT('',(132.164597,-53.622487,1.585)); +#234770 = VECTOR('',#234771,1.); +#234771 = DIRECTION('',(0.,-1.,0.)); +#234772 = ORIENTED_EDGE('',*,*,#234773,.T.); +#234773 = EDGE_CURVE('',#234766,#234774,#234776,.T.); +#234774 = VERTEX_POINT('',#234775); +#234775 = CARTESIAN_POINT('',(132.199265,-53.829172,1.585)); +#234776 = LINE('',#234777,#234778); +#234777 = CARTESIAN_POINT('',(132.164597,-53.725167,1.585)); +#234778 = VECTOR('',#234779,1.); +#234779 = DIRECTION('',(0.316225029558,-0.948684210199,0.)); +#234780 = ORIENTED_EDGE('',*,*,#234781,.T.); +#234781 = EDGE_CURVE('',#234774,#234782,#234784,.T.); +#234782 = VERTEX_POINT('',#234783); +#234783 = CARTESIAN_POINT('',(132.266669,-53.896578,1.585)); +#234784 = LINE('',#234785,#234786); +#234785 = CARTESIAN_POINT('',(132.199265,-53.829172,1.585)); +#234786 = VECTOR('',#234787,1.); +#234787 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#234788 = ORIENTED_EDGE('',*,*,#234789,.T.); +#234789 = EDGE_CURVE('',#234782,#234790,#234792,.T.); +#234790 = VERTEX_POINT('',#234791); +#234791 = CARTESIAN_POINT('',(132.605881,-53.970714,1.585)); +#234792 = CIRCLE('',#234793,0.553317785494); +#234793 = AXIS2_PLACEMENT_3D('',#234794,#234795,#234796); +#234794 = CARTESIAN_POINT('',(132.5484500839,-53.42038476979,1.585)); +#234795 = DIRECTION('',(0.,0.,1.)); +#234796 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#234797 = ORIENTED_EDGE('',*,*,#234798,.T.); +#234798 = EDGE_CURVE('',#234790,#234799,#234801,.T.); +#234799 = VERTEX_POINT('',#234800); +#234800 = CARTESIAN_POINT('',(132.762622,-53.931528,1.585)); +#234801 = LINE('',#234802,#234803); +#234802 = CARTESIAN_POINT('',(132.605881,-53.970714,1.585)); +#234803 = VECTOR('',#234804,1.); +#234804 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#234805 = ORIENTED_EDGE('',*,*,#234806,.T.); +#234806 = EDGE_CURVE('',#234799,#234807,#234809,.T.); +#234807 = VERTEX_POINT('',#234808); +#234808 = CARTESIAN_POINT('',(132.832522,-53.896579,1.585)); +#234809 = LINE('',#234810,#234811); +#234810 = CARTESIAN_POINT('',(132.762622,-53.931528,1.585)); +#234811 = VECTOR('',#234812,1.); +#234812 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#234813 = ORIENTED_EDGE('',*,*,#234814,.T.); +#234814 = EDGE_CURVE('',#234807,#234815,#234817,.T.); +#234815 = VERTEX_POINT('',#234816); +#234816 = CARTESIAN_POINT('',(132.899928,-53.829172,1.585)); +#234817 = LINE('',#234818,#234819); +#234818 = CARTESIAN_POINT('',(132.832522,-53.896579,1.585)); +#234819 = VECTOR('',#234820,1.); +#234820 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#234821 = ORIENTED_EDGE('',*,*,#234822,.T.); +#234822 = EDGE_CURVE('',#234815,#234823,#234825,.T.); +#234823 = VERTEX_POINT('',#234824); +#234824 = CARTESIAN_POINT('',(132.899928,-53.55654,1.585)); +#234825 = CIRCLE('',#234826,0.272194686174); +#234826 = AXIS2_PLACEMENT_3D('',#234827,#234828,#234829); +#234827 = CARTESIAN_POINT('',(132.66432686391,-53.692856,1.585)); +#234828 = DIRECTION('',(0.,-0.,1.)); +#234829 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#234830 = ORIENTED_EDGE('',*,*,#234831,.T.); +#234831 = EDGE_CURVE('',#234823,#234832,#234834,.T.); +#234832 = VERTEX_POINT('',#234833); +#234833 = CARTESIAN_POINT('',(132.886959,-53.543571,1.585)); +#234834 = LINE('',#234835,#234836); +#234835 = CARTESIAN_POINT('',(132.899928,-53.55654,1.585)); +#234836 = VECTOR('',#234837,1.); +#234837 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#234838 = ORIENTED_EDGE('',*,*,#234839,.T.); +#234839 = EDGE_CURVE('',#234832,#234840,#234842,.T.); +#234840 = VERTEX_POINT('',#234841); +#234841 = CARTESIAN_POINT('',(132.678882,-53.543571,1.585)); +#234842 = LINE('',#234843,#234844); +#234843 = CARTESIAN_POINT('',(132.886959,-53.543571,1.585)); +#234844 = VECTOR('',#234845,1.); +#234845 = DIRECTION('',(-1.,0.,0.)); +#234846 = ORIENTED_EDGE('',*,*,#234847,.T.); +#234847 = EDGE_CURVE('',#234840,#234848,#234850,.T.); +#234848 = VERTEX_POINT('',#234849); +#234849 = CARTESIAN_POINT('',(132.678882,-53.65,1.585)); +#234850 = LINE('',#234851,#234852); +#234851 = CARTESIAN_POINT('',(132.678882,-53.543571,1.585)); +#234852 = VECTOR('',#234853,1.); +#234853 = DIRECTION('',(0.,-1.,0.)); +#234854 = ORIENTED_EDGE('',*,*,#234855,.T.); +#234855 = EDGE_CURVE('',#234848,#234856,#234858,.T.); +#234856 = VERTEX_POINT('',#234857); +#234857 = CARTESIAN_POINT('',(132.548882,-53.65,1.585)); +#234858 = CIRCLE('',#234859,6.500000000091E-02); +#234859 = AXIS2_PLACEMENT_3D('',#234860,#234861,#234862); +#234860 = CARTESIAN_POINT('',(132.613882,-53.64999965513,1.585)); +#234861 = DIRECTION('',(-0.,0.,-1.)); +#234862 = DIRECTION('',(0.999999999986,-5.305658134983E-06,-0.)); +#234863 = ORIENTED_EDGE('',*,*,#234864,.T.); +#234864 = EDGE_CURVE('',#234856,#234632,#234865,.T.); +#234865 = LINE('',#234866,#234867); +#234866 = CARTESIAN_POINT('',(132.548882,-53.65,1.585)); +#234867 = VECTOR('',#234868,1.); +#234868 = DIRECTION('',(0.,1.,0.)); +#234869 = PLANE('',#234870); +#234870 = AXIS2_PLACEMENT_3D('',#234871,#234872,#234873); +#234871 = CARTESIAN_POINT('',(0.,0.,1.585)); +#234872 = DIRECTION('',(0.,0.,1.)); +#234873 = DIRECTION('',(1.,0.,-0.)); +#234874 = SHELL_BASED_SURFACE_MODEL('',(#234875)); +#234875 = OPEN_SHELL('',(#234876)); +#234876 = ADVANCED_FACE('',(#234877,#234954),#235031,.T.); +#234877 = FACE_BOUND('',#234878,.F.); +#234878 = EDGE_LOOP('',(#234879,#234890,#234898,#234907,#234915,#234923, + #234932,#234940,#234948)); +#234879 = ORIENTED_EDGE('',*,*,#234880,.T.); +#234880 = EDGE_CURVE('',#234881,#234883,#234885,.T.); +#234881 = VERTEX_POINT('',#234882); +#234882 = CARTESIAN_POINT('',(177.115199,-53.386172,1.585)); +#234883 = VERTEX_POINT('',#234884); +#234884 = CARTESIAN_POINT('',(177.678513,-53.391538,1.585)); +#234885 = CIRCLE('',#234886,0.504047013411); +#234886 = AXIS2_PLACEMENT_3D('',#234887,#234888,#234889); +#234887 = CARTESIAN_POINT('',(177.39287439108,-53.80683786374,1.585)); +#234888 = DIRECTION('',(0.,0.,-1.)); +#234889 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#234890 = ORIENTED_EDGE('',*,*,#234891,.T.); +#234891 = EDGE_CURVE('',#234883,#234892,#234894,.T.); +#234892 = VERTEX_POINT('',#234893); +#234893 = CARTESIAN_POINT('',(177.741967,-53.457068,1.585)); +#234894 = LINE('',#234895,#234896); +#234895 = CARTESIAN_POINT('',(177.678513,-53.391538,1.585)); +#234896 = VECTOR('',#234897,1.); +#234897 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#234898 = ORIENTED_EDGE('',*,*,#234899,.T.); +#234899 = EDGE_CURVE('',#234892,#234900,#234902,.T.); +#234900 = VERTEX_POINT('',#234901); +#234901 = CARTESIAN_POINT('',(177.671067,-53.940979,1.585)); +#234902 = CIRCLE('',#234903,0.3442476568); +#234903 = AXIS2_PLACEMENT_3D('',#234904,#234905,#234906); +#234904 = CARTESIAN_POINT('',(177.46678063106,-53.66389863497,1.585)); +#234905 = DIRECTION('',(0.,0.,-1.)); +#234906 = DIRECTION('',(0.799384871611,0.600819296494,0.)); +#234907 = ORIENTED_EDGE('',*,*,#234908,.T.); +#234908 = EDGE_CURVE('',#234900,#234909,#234911,.T.); +#234909 = VERTEX_POINT('',#234910); +#234910 = CARTESIAN_POINT('',(177.550624,-53.999039,1.585)); +#234911 = LINE('',#234912,#234913); +#234912 = CARTESIAN_POINT('',(177.671067,-53.940979,1.585)); +#234913 = VECTOR('',#234914,1.); +#234914 = DIRECTION('',(-0.900800079444,-0.434234057708,0.)); +#234915 = ORIENTED_EDGE('',*,*,#234916,.T.); +#234916 = EDGE_CURVE('',#234909,#234917,#234919,.T.); +#234917 = VERTEX_POINT('',#234918); +#234918 = CARTESIAN_POINT('',(177.230468,-53.997817,1.585)); +#234919 = LINE('',#234920,#234921); +#234920 = CARTESIAN_POINT('',(177.550624,-53.999039,1.585)); +#234921 = VECTOR('',#234922,1.); +#234922 = DIRECTION('',(-0.999992715758,3.816861463354E-03,0.)); +#234923 = ORIENTED_EDGE('',*,*,#234924,.T.); +#234924 = EDGE_CURVE('',#234917,#234925,#234927,.T.); +#234925 = VERTEX_POINT('',#234926); +#234926 = CARTESIAN_POINT('',(176.986243,-53.749636,1.585)); +#234927 = CIRCLE('',#234928,0.348628078749); +#234928 = AXIS2_PLACEMENT_3D('',#234929,#234930,#234931); +#234929 = CARTESIAN_POINT('',(177.3236430302,-53.66187064857,1.585)); +#234930 = DIRECTION('',(0.,0.,-1.)); +#234931 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#234932 = ORIENTED_EDGE('',*,*,#234933,.T.); +#234933 = EDGE_CURVE('',#234925,#234934,#234936,.T.); +#234934 = VERTEX_POINT('',#234935); +#234935 = CARTESIAN_POINT('',(176.987465,-53.572338,1.585)); +#234936 = LINE('',#234937,#234938); +#234937 = CARTESIAN_POINT('',(176.986243,-53.749636,1.585)); +#234938 = VECTOR('',#234939,1.); +#234939 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#234940 = ORIENTED_EDGE('',*,*,#234941,.T.); +#234941 = EDGE_CURVE('',#234934,#234942,#234944,.T.); +#234942 = VERTEX_POINT('',#234943); +#234943 = CARTESIAN_POINT('',(177.049669,-53.449625,1.585)); +#234944 = LINE('',#234945,#234946); +#234945 = CARTESIAN_POINT('',(176.987465,-53.572338,1.585)); +#234946 = VECTOR('',#234947,1.); +#234947 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#234948 = ORIENTED_EDGE('',*,*,#234949,.T.); +#234949 = EDGE_CURVE('',#234942,#234881,#234950,.T.); +#234950 = LINE('',#234951,#234952); +#234951 = CARTESIAN_POINT('',(177.049669,-53.449625,1.585)); +#234952 = VECTOR('',#234953,1.); +#234953 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#234954 = FACE_BOUND('',#234955,.F.); +#234955 = EDGE_LOOP('',(#234956,#234967,#234975,#234984,#234992,#235000, + #235009,#235017,#235025)); +#234956 = ORIENTED_EDGE('',*,*,#234957,.T.); +#234957 = EDGE_CURVE('',#234958,#234960,#234962,.T.); +#234958 = VERTEX_POINT('',#234959); +#234959 = CARTESIAN_POINT('',(177.586803,-53.510929,1.585)); +#234960 = VERTEX_POINT('',#234961); +#234961 = CARTESIAN_POINT('',(177.199467,-53.510929,1.585)); +#234962 = CIRCLE('',#234963,0.358503491901); +#234963 = AXIS2_PLACEMENT_3D('',#234964,#234965,#234966); +#234964 = CARTESIAN_POINT('',(177.393135,-53.81262,1.585)); +#234965 = DIRECTION('',(0.,0.,1.)); +#234966 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#234967 = ORIENTED_EDGE('',*,*,#234968,.T.); +#234968 = EDGE_CURVE('',#234960,#234969,#234971,.T.); +#234969 = VERTEX_POINT('',#234970); +#234970 = CARTESIAN_POINT('',(177.16906,-53.541336,1.585)); +#234971 = LINE('',#234972,#234973); +#234972 = CARTESIAN_POINT('',(177.199467,-53.510929,1.585)); +#234973 = VECTOR('',#234974,1.); +#234974 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#234975 = ORIENTED_EDGE('',*,*,#234976,.T.); +#234976 = EDGE_CURVE('',#234969,#234977,#234979,.T.); +#234977 = VERTEX_POINT('',#234978); +#234978 = CARTESIAN_POINT('',(177.199467,-53.816222,1.585)); +#234979 = CIRCLE('',#234980,0.198386215365); +#234980 = AXIS2_PLACEMENT_3D('',#234981,#234982,#234983); +#234981 = CARTESIAN_POINT('',(177.3256521753,-53.66313904216,1.585)); +#234982 = DIRECTION('',(0.,0.,1.)); +#234983 = DIRECTION('',(-0.789329919001,0.61396928178,0.)); +#234984 = ORIENTED_EDGE('',*,*,#234985,.T.); +#234985 = EDGE_CURVE('',#234977,#234986,#234988,.T.); +#234986 = VERTEX_POINT('',#234987); +#234987 = CARTESIAN_POINT('',(177.267983,-53.85048,1.585)); +#234988 = LINE('',#234989,#234990); +#234989 = CARTESIAN_POINT('',(177.199467,-53.816222,1.585)); +#234990 = VECTOR('',#234991,1.); +#234991 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#234992 = ORIENTED_EDGE('',*,*,#234993,.T.); +#234993 = EDGE_CURVE('',#234986,#234994,#234996,.T.); +#234994 = VERTEX_POINT('',#234995); +#234995 = CARTESIAN_POINT('',(177.518287,-53.85048,1.585)); +#234996 = LINE('',#234997,#234998); +#234997 = CARTESIAN_POINT('',(177.267983,-53.85048,1.585)); +#234998 = VECTOR('',#234999,1.); +#234999 = DIRECTION('',(1.,0.,0.)); +#235000 = ORIENTED_EDGE('',*,*,#235001,.T.); +#235001 = EDGE_CURVE('',#234994,#235002,#235004,.T.); +#235002 = VERTEX_POINT('',#235003); +#235003 = CARTESIAN_POINT('',(177.651469,-53.717299,1.585)); +#235004 = CIRCLE('',#235005,0.186872595955); +#235005 = AXIS2_PLACEMENT_3D('',#235006,#235007,#235008); +#235006 = CARTESIAN_POINT('',(177.47074536766,-53.66975601068,1.585)); +#235007 = DIRECTION('',(0.,0.,1.)); +#235008 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#235009 = ORIENTED_EDGE('',*,*,#235010,.T.); +#235010 = EDGE_CURVE('',#235002,#235011,#235013,.T.); +#235011 = VERTEX_POINT('',#235012); +#235012 = CARTESIAN_POINT('',(177.651469,-53.609852,1.585)); +#235013 = LINE('',#235014,#235015); +#235014 = CARTESIAN_POINT('',(177.651469,-53.717299,1.585)); +#235015 = VECTOR('',#235016,1.); +#235016 = DIRECTION('',(0.,1.,0.)); +#235017 = ORIENTED_EDGE('',*,*,#235018,.T.); +#235018 = EDGE_CURVE('',#235011,#235019,#235021,.T.); +#235019 = VERTEX_POINT('',#235020); +#235020 = CARTESIAN_POINT('',(177.617211,-53.541336,1.585)); +#235021 = LINE('',#235022,#235023); +#235022 = CARTESIAN_POINT('',(177.651469,-53.609852,1.585)); +#235023 = VECTOR('',#235024,1.); +#235024 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#235025 = ORIENTED_EDGE('',*,*,#235026,.T.); +#235026 = EDGE_CURVE('',#235019,#234958,#235027,.T.); +#235027 = LINE('',#235028,#235029); +#235028 = CARTESIAN_POINT('',(177.617211,-53.541336,1.585)); +#235029 = VECTOR('',#235030,1.); +#235030 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#235031 = PLANE('',#235032); +#235032 = AXIS2_PLACEMENT_3D('',#235033,#235034,#235035); +#235033 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235034 = DIRECTION('',(0.,0.,1.)); +#235035 = DIRECTION('',(1.,0.,-0.)); +#235036 = SHELL_BASED_SURFACE_MODEL('',(#235037)); +#235037 = OPEN_SHELL('',(#235038)); +#235038 = ADVANCED_FACE('',(#235039),#235108,.T.); +#235039 = FACE_BOUND('',#235040,.F.); +#235040 = EDGE_LOOP('',(#235041,#235052,#235060,#235069,#235077,#235086, + #235094,#235102)); +#235041 = ORIENTED_EDGE('',*,*,#235042,.T.); +#235042 = EDGE_CURVE('',#235043,#235045,#235047,.T.); +#235043 = VERTEX_POINT('',#235044); +#235044 = CARTESIAN_POINT('',(140.549545,-53.346553,1.585)); +#235045 = VERTEX_POINT('',#235046); +#235046 = CARTESIAN_POINT('',(140.674597,-53.371427,1.585)); +#235047 = CIRCLE('',#235048,6.499988811649E-02); +#235048 = AXIS2_PLACEMENT_3D('',#235049,#235050,#235051); +#235049 = CARTESIAN_POINT('',(140.60959711188,-53.3714272701,1.585)); +#235050 = DIRECTION('',(0.,0.,-1.)); +#235051 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#235052 = ORIENTED_EDGE('',*,*,#235053,.T.); +#235053 = EDGE_CURVE('',#235045,#235054,#235056,.T.); +#235054 = VERTEX_POINT('',#235055); +#235055 = CARTESIAN_POINT('',(140.674597,-53.799999,1.585)); +#235056 = LINE('',#235057,#235058); +#235057 = CARTESIAN_POINT('',(140.674597,-53.371427,1.585)); +#235058 = VECTOR('',#235059,1.); +#235059 = DIRECTION('',(0.,-1.,0.)); +#235060 = ORIENTED_EDGE('',*,*,#235061,.T.); +#235061 = EDGE_CURVE('',#235054,#235062,#235064,.T.); +#235062 = VERTEX_POINT('',#235063); +#235063 = CARTESIAN_POINT('',(140.609597,-53.864999,1.585)); +#235064 = CIRCLE('',#235065,6.500103935393E-02); +#235065 = AXIS2_PLACEMENT_3D('',#235066,#235067,#235068); +#235066 = CARTESIAN_POINT('',(140.60959596065,-53.79999796065,1.585)); +#235067 = DIRECTION('',(0.,0.,-1.)); +#235068 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#235069 = ORIENTED_EDGE('',*,*,#235070,.T.); +#235070 = EDGE_CURVE('',#235062,#235071,#235073,.T.); +#235071 = VERTEX_POINT('',#235072); +#235072 = CARTESIAN_POINT('',(139.709597,-53.864999,1.585)); +#235073 = LINE('',#235074,#235075); +#235074 = CARTESIAN_POINT('',(140.609597,-53.864999,1.585)); +#235075 = VECTOR('',#235076,1.); +#235076 = DIRECTION('',(-1.,0.,0.)); +#235077 = ORIENTED_EDGE('',*,*,#235078,.T.); +#235078 = EDGE_CURVE('',#235071,#235079,#235081,.T.); +#235079 = VERTEX_POINT('',#235080); +#235080 = CARTESIAN_POINT('',(139.709597,-53.734999,1.585)); +#235081 = CIRCLE('',#235082,6.500000000091E-02); +#235082 = AXIS2_PLACEMENT_3D('',#235083,#235084,#235085); +#235083 = CARTESIAN_POINT('',(139.70959734486,-53.799999,1.585)); +#235084 = DIRECTION('',(0.,0.,-1.)); +#235085 = DIRECTION('',(-5.305658025669E-06,-0.999999999986,-0.)); +#235086 = ORIENTED_EDGE('',*,*,#235087,.T.); +#235087 = EDGE_CURVE('',#235079,#235088,#235090,.T.); +#235088 = VERTEX_POINT('',#235089); +#235089 = CARTESIAN_POINT('',(140.544597,-53.734999,1.585)); +#235090 = LINE('',#235091,#235092); +#235091 = CARTESIAN_POINT('',(139.709597,-53.734999,1.585)); +#235092 = VECTOR('',#235093,1.); +#235093 = DIRECTION('',(1.,0.,0.)); +#235094 = ORIENTED_EDGE('',*,*,#235095,.T.); +#235095 = EDGE_CURVE('',#235088,#235096,#235098,.T.); +#235096 = VERTEX_POINT('',#235097); +#235097 = CARTESIAN_POINT('',(140.544597,-53.371427,1.585)); +#235098 = LINE('',#235099,#235100); +#235099 = CARTESIAN_POINT('',(140.544597,-53.734999,1.585)); +#235100 = VECTOR('',#235101,1.); +#235101 = DIRECTION('',(0.,1.,0.)); +#235102 = ORIENTED_EDGE('',*,*,#235103,.T.); +#235103 = EDGE_CURVE('',#235096,#235043,#235104,.T.); +#235104 = LINE('',#235105,#235106); +#235105 = CARTESIAN_POINT('',(140.544597,-53.371427,1.585)); +#235106 = VECTOR('',#235107,1.); +#235107 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#235108 = PLANE('',#235109); +#235109 = AXIS2_PLACEMENT_3D('',#235110,#235111,#235112); +#235110 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235111 = DIRECTION('',(0.,0.,1.)); +#235112 = DIRECTION('',(1.,0.,-0.)); +#235113 = SHELL_BASED_SURFACE_MODEL('',(#235114)); +#235114 = OPEN_SHELL('',(#235115)); +#235115 = ADVANCED_FACE('',(#235116),#235193,.T.); +#235116 = FACE_BOUND('',#235117,.F.); +#235117 = EDGE_LOOP('',(#235118,#235129,#235137,#235146,#235154,#235163, + #235171,#235179,#235187)); +#235118 = ORIENTED_EDGE('',*,*,#235119,.T.); +#235119 = EDGE_CURVE('',#235120,#235122,#235124,.T.); +#235120 = VERTEX_POINT('',#235121); +#235121 = CARTESIAN_POINT('',(149.814761,-53.204606,1.585)); +#235122 = VERTEX_POINT('',#235123); +#235123 = CARTESIAN_POINT('',(149.900152,-53.138335,1.585)); +#235124 = CIRCLE('',#235125,6.499990070434E-02); +#235125 = AXIS2_PLACEMENT_3D('',#235126,#235127,#235128); +#235126 = CARTESIAN_POINT('',(149.87959745813,-53.19999939734,1.585)); +#235127 = DIRECTION('',(0.,0.,-1.)); +#235128 = DIRECTION('',(-0.997485495103,-7.0870918291E-02,-0.)); +#235129 = ORIENTED_EDGE('',*,*,#235130,.T.); +#235130 = EDGE_CURVE('',#235122,#235131,#235133,.T.); +#235131 = VERTEX_POINT('',#235132); +#235132 = CARTESIAN_POINT('',(150.800152,-53.438334,1.585)); +#235133 = LINE('',#235134,#235135); +#235134 = CARTESIAN_POINT('',(149.900152,-53.138335,1.585)); +#235135 = VECTOR('',#235136,1.); +#235136 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#235137 = ORIENTED_EDGE('',*,*,#235138,.T.); +#235138 = EDGE_CURVE('',#235131,#235139,#235141,.T.); +#235139 = VERTEX_POINT('',#235140); +#235140 = CARTESIAN_POINT('',(150.800152,-53.561664,1.585)); +#235141 = CIRCLE('',#235142,6.500111611216E-02); +#235142 = AXIS2_PLACEMENT_3D('',#235143,#235144,#235145); +#235143 = CARTESIAN_POINT('',(150.77959542268,-53.499999,1.585)); +#235144 = DIRECTION('',(0.,0.,-1.)); +#235145 = DIRECTION('',(0.316249605277,0.948676018018,0.)); +#235146 = ORIENTED_EDGE('',*,*,#235147,.T.); +#235147 = EDGE_CURVE('',#235139,#235148,#235150,.T.); +#235148 = VERTEX_POINT('',#235149); +#235149 = CARTESIAN_POINT('',(149.900152,-53.861663,1.585)); +#235150 = LINE('',#235151,#235152); +#235151 = CARTESIAN_POINT('',(150.800152,-53.561664,1.585)); +#235152 = VECTOR('',#235153,1.); +#235153 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#235154 = ORIENTED_EDGE('',*,*,#235155,.T.); +#235155 = EDGE_CURVE('',#235148,#235156,#235158,.T.); +#235156 = VERTEX_POINT('',#235157); +#235157 = CARTESIAN_POINT('',(149.859042,-53.738335,1.585)); +#235158 = CIRCLE('',#235159,6.499966862238E-02); +#235159 = AXIS2_PLACEMENT_3D('',#235160,#235161,#235162); +#235160 = CARTESIAN_POINT('',(149.87959712923,-53.79999895692,1.585)); +#235161 = DIRECTION('',(0.,0.,-1.)); +#235162 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#235163 = ORIENTED_EDGE('',*,*,#235164,.T.); +#235164 = EDGE_CURVE('',#235156,#235165,#235167,.T.); +#235165 = VERTEX_POINT('',#235166); +#235166 = CARTESIAN_POINT('',(150.57405,-53.499999,1.585)); +#235167 = LINE('',#235168,#235169); +#235168 = CARTESIAN_POINT('',(149.859042,-53.738335,1.585)); +#235169 = VECTOR('',#235170,1.); +#235170 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#235171 = ORIENTED_EDGE('',*,*,#235172,.T.); +#235172 = EDGE_CURVE('',#235165,#235173,#235175,.T.); +#235173 = VERTEX_POINT('',#235174); +#235174 = CARTESIAN_POINT('',(149.859042,-53.261663,1.585)); +#235175 = LINE('',#235176,#235177); +#235176 = CARTESIAN_POINT('',(150.57405,-53.499999,1.585)); +#235177 = VECTOR('',#235178,1.); +#235178 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#235179 = ORIENTED_EDGE('',*,*,#235180,.T.); +#235180 = EDGE_CURVE('',#235173,#235181,#235183,.T.); +#235181 = VERTEX_POINT('',#235182); +#235182 = CARTESIAN_POINT('',(149.837009,-53.249103,1.585)); +#235183 = LINE('',#235184,#235185); +#235184 = CARTESIAN_POINT('',(149.859042,-53.261663,1.585)); +#235185 = VECTOR('',#235186,1.); +#235186 = DIRECTION('',(-0.868757082859,0.495238458708,0.)); +#235187 = ORIENTED_EDGE('',*,*,#235188,.T.); +#235188 = EDGE_CURVE('',#235181,#235120,#235189,.T.); +#235189 = LINE('',#235190,#235191); +#235190 = CARTESIAN_POINT('',(149.837009,-53.249103,1.585)); +#235191 = VECTOR('',#235192,1.); +#235192 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#235193 = PLANE('',#235194); +#235194 = AXIS2_PLACEMENT_3D('',#235195,#235196,#235197); +#235195 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235196 = DIRECTION('',(0.,0.,1.)); +#235197 = DIRECTION('',(1.,0.,-0.)); +#235198 = SHELL_BASED_SURFACE_MODEL('',(#235199)); +#235199 = OPEN_SHELL('',(#235200)); +#235200 = ADVANCED_FACE('',(#235201),#235278,.T.); +#235201 = FACE_BOUND('',#235202,.F.); +#235202 = EDGE_LOOP('',(#235203,#235214,#235222,#235230,#235239,#235247, + #235255,#235264,#235272)); +#235203 = ORIENTED_EDGE('',*,*,#235204,.T.); +#235204 = EDGE_CURVE('',#235205,#235207,#235209,.T.); +#235205 = VERTEX_POINT('',#235206); +#235206 = CARTESIAN_POINT('',(142.199545,-53.196554,1.585)); +#235207 = VERTEX_POINT('',#235208); +#235208 = CARTESIAN_POINT('',(142.324597,-53.221428,1.585)); +#235209 = CIRCLE('',#235210,6.499988811648E-02); +#235210 = AXIS2_PLACEMENT_3D('',#235211,#235212,#235213); +#235211 = CARTESIAN_POINT('',(142.25959711188,-53.2214282701,1.585)); +#235212 = DIRECTION('',(0.,0.,-1.)); +#235213 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#235214 = ORIENTED_EDGE('',*,*,#235215,.T.); +#235215 = EDGE_CURVE('',#235207,#235216,#235218,.T.); +#235216 = VERTEX_POINT('',#235217); +#235217 = CARTESIAN_POINT('',(142.324597,-53.41357,1.585)); +#235218 = LINE('',#235219,#235220); +#235219 = CARTESIAN_POINT('',(142.324597,-53.221428,1.585)); +#235220 = VECTOR('',#235221,1.); +#235221 = DIRECTION('',(0.,-1.,0.)); +#235222 = ORIENTED_EDGE('',*,*,#235223,.T.); +#235223 = EDGE_CURVE('',#235216,#235224,#235226,.T.); +#235224 = VERTEX_POINT('',#235225); +#235225 = CARTESIAN_POINT('',(143.159597,-53.41357,1.585)); +#235226 = LINE('',#235227,#235228); +#235227 = CARTESIAN_POINT('',(142.324597,-53.41357,1.585)); +#235228 = VECTOR('',#235229,1.); +#235229 = DIRECTION('',(1.,0.,0.)); +#235230 = ORIENTED_EDGE('',*,*,#235231,.T.); +#235231 = EDGE_CURVE('',#235224,#235232,#235234,.T.); +#235232 = VERTEX_POINT('',#235233); +#235233 = CARTESIAN_POINT('',(143.159597,-53.54357,1.585)); +#235234 = CIRCLE('',#235235,6.500000000092E-02); +#235235 = AXIS2_PLACEMENT_3D('',#235236,#235237,#235238); +#235236 = CARTESIAN_POINT('',(143.15959665513,-53.47857,1.585)); +#235237 = DIRECTION('',(0.,0.,-1.)); +#235238 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#235239 = ORIENTED_EDGE('',*,*,#235240,.T.); +#235240 = EDGE_CURVE('',#235232,#235241,#235243,.T.); +#235241 = VERTEX_POINT('',#235242); +#235242 = CARTESIAN_POINT('',(142.324597,-53.54357,1.585)); +#235243 = LINE('',#235244,#235245); +#235244 = CARTESIAN_POINT('',(143.159597,-53.54357,1.585)); +#235245 = VECTOR('',#235246,1.); +#235246 = DIRECTION('',(-1.,0.,0.)); +#235247 = ORIENTED_EDGE('',*,*,#235248,.T.); +#235248 = EDGE_CURVE('',#235241,#235249,#235251,.T.); +#235249 = VERTEX_POINT('',#235250); +#235250 = CARTESIAN_POINT('',(142.324597,-53.735713,1.585)); +#235251 = LINE('',#235252,#235253); +#235252 = CARTESIAN_POINT('',(142.324597,-53.54357,1.585)); +#235253 = VECTOR('',#235254,1.); +#235254 = DIRECTION('',(0.,-1.,0.)); +#235255 = ORIENTED_EDGE('',*,*,#235256,.T.); +#235256 = EDGE_CURVE('',#235249,#235257,#235259,.T.); +#235257 = VERTEX_POINT('',#235258); +#235258 = CARTESIAN_POINT('',(142.194597,-53.735713,1.585)); +#235259 = CIRCLE('',#235260,6.500000000093E-02); +#235260 = AXIS2_PLACEMENT_3D('',#235261,#235262,#235263); +#235261 = CARTESIAN_POINT('',(142.259597,-53.73571265513,1.585)); +#235262 = DIRECTION('',(-0.,0.,-1.)); +#235263 = DIRECTION('',(0.999999999986,-5.305658244295E-06,-0.)); +#235264 = ORIENTED_EDGE('',*,*,#235265,.T.); +#235265 = EDGE_CURVE('',#235257,#235266,#235268,.T.); +#235266 = VERTEX_POINT('',#235267); +#235267 = CARTESIAN_POINT('',(142.194597,-53.221428,1.585)); +#235268 = LINE('',#235269,#235270); +#235269 = CARTESIAN_POINT('',(142.194597,-53.735713,1.585)); +#235270 = VECTOR('',#235271,1.); +#235271 = DIRECTION('',(0.,1.,0.)); +#235272 = ORIENTED_EDGE('',*,*,#235273,.T.); +#235273 = EDGE_CURVE('',#235266,#235205,#235274,.T.); +#235274 = LINE('',#235275,#235276); +#235275 = CARTESIAN_POINT('',(142.194597,-53.221428,1.585)); +#235276 = VECTOR('',#235277,1.); +#235277 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#235278 = PLANE('',#235279); +#235279 = AXIS2_PLACEMENT_3D('',#235280,#235281,#235282); +#235280 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235281 = DIRECTION('',(0.,0.,1.)); +#235282 = DIRECTION('',(1.,0.,-0.)); +#235283 = SHELL_BASED_SURFACE_MODEL('',(#235284)); +#235284 = OPEN_SHELL('',(#235285)); +#235285 = ADVANCED_FACE('',(#235286,#235387),#235446,.T.); +#235286 = FACE_BOUND('',#235287,.F.); +#235287 = EDGE_LOOP('',(#235288,#235299,#235307,#235315,#235323,#235331, + #235339,#235348,#235356,#235365,#235373,#235381)); +#235288 = ORIENTED_EDGE('',*,*,#235289,.T.); +#235289 = EDGE_CURVE('',#235290,#235292,#235294,.T.); +#235290 = VERTEX_POINT('',#235291); +#235291 = CARTESIAN_POINT('',(134.808013,-53.205389,1.585)); +#235292 = VERTEX_POINT('',#235293); +#235293 = CARTESIAN_POINT('',(135.088666,-53.156146,1.585)); +#235294 = CIRCLE('',#235295,0.327183487819); +#235295 = AXIS2_PLACEMENT_3D('',#235296,#235297,#235298); +#235296 = CARTESIAN_POINT('',(134.99924076591,-53.47087153472,1.585)); +#235297 = DIRECTION('',(0.,0.,-1.)); +#235298 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#235299 = ORIENTED_EDGE('',*,*,#235300,.T.); +#235300 = EDGE_CURVE('',#235292,#235301,#235303,.T.); +#235301 = VERTEX_POINT('',#235302); +#235302 = CARTESIAN_POINT('',(135.191273,-53.211179,1.585)); +#235303 = LINE('',#235304,#235305); +#235304 = CARTESIAN_POINT('',(135.088666,-53.156146,1.585)); +#235305 = VECTOR('',#235306,1.); +#235306 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#235307 = ORIENTED_EDGE('',*,*,#235308,.T.); +#235308 = EDGE_CURVE('',#235301,#235309,#235311,.T.); +#235309 = VERTEX_POINT('',#235310); +#235310 = CARTESIAN_POINT('',(135.246306,-53.270929,1.585)); +#235311 = LINE('',#235312,#235313); +#235312 = CARTESIAN_POINT('',(135.191273,-53.211179,1.585)); +#235313 = VECTOR('',#235314,1.); +#235314 = DIRECTION('',(0.677476455829,-0.735544459429,0.)); +#235315 = ORIENTED_EDGE('',*,*,#235316,.T.); +#235316 = EDGE_CURVE('',#235309,#235317,#235319,.T.); +#235317 = VERTEX_POINT('',#235318); +#235318 = CARTESIAN_POINT('',(135.293109,-53.371056,1.585)); +#235319 = LINE('',#235320,#235321); +#235320 = CARTESIAN_POINT('',(135.246306,-53.270929,1.585)); +#235321 = VECTOR('',#235322,1.); +#235322 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#235323 = ORIENTED_EDGE('',*,*,#235324,.T.); +#235324 = EDGE_CURVE('',#235317,#235325,#235327,.T.); +#235325 = VERTEX_POINT('',#235326); +#235326 = CARTESIAN_POINT('',(135.296025,-53.66357,1.585)); +#235327 = LINE('',#235328,#235329); +#235328 = CARTESIAN_POINT('',(135.293109,-53.371056,1.585)); +#235329 = VECTOR('',#235330,1.); +#235330 = DIRECTION('',(9.968258341542E-03,-0.999950315679,0.)); +#235331 = ORIENTED_EDGE('',*,*,#235332,.T.); +#235332 = EDGE_CURVE('',#235325,#235333,#235335,.T.); +#235333 = VERTEX_POINT('',#235334); +#235334 = CARTESIAN_POINT('',(135.659597,-53.66357,1.585)); +#235335 = LINE('',#235336,#235337); +#235336 = CARTESIAN_POINT('',(135.296025,-53.66357,1.585)); +#235337 = VECTOR('',#235338,1.); +#235338 = DIRECTION('',(1.,0.,0.)); +#235339 = ORIENTED_EDGE('',*,*,#235340,.T.); +#235340 = EDGE_CURVE('',#235333,#235341,#235343,.T.); +#235341 = VERTEX_POINT('',#235342); +#235342 = CARTESIAN_POINT('',(135.659597,-53.79357,1.585)); +#235343 = CIRCLE('',#235344,6.500000000092E-02); +#235344 = AXIS2_PLACEMENT_3D('',#235345,#235346,#235347); +#235345 = CARTESIAN_POINT('',(135.65959665513,-53.72857,1.585)); +#235346 = DIRECTION('',(0.,0.,-1.)); +#235347 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#235348 = ORIENTED_EDGE('',*,*,#235349,.T.); +#235349 = EDGE_CURVE('',#235341,#235350,#235352,.T.); +#235350 = VERTEX_POINT('',#235351); +#235351 = CARTESIAN_POINT('',(134.759597,-53.79357,1.585)); +#235352 = LINE('',#235353,#235354); +#235353 = CARTESIAN_POINT('',(135.659597,-53.79357,1.585)); +#235354 = VECTOR('',#235355,1.); +#235355 = DIRECTION('',(-1.,0.,0.)); +#235356 = ORIENTED_EDGE('',*,*,#235357,.T.); +#235357 = EDGE_CURVE('',#235350,#235358,#235360,.T.); +#235358 = VERTEX_POINT('',#235359); +#235359 = CARTESIAN_POINT('',(134.694597,-53.72857,1.585)); +#235360 = CIRCLE('',#235361,6.500103935393E-02); +#235361 = AXIS2_PLACEMENT_3D('',#235362,#235363,#235364); +#235362 = CARTESIAN_POINT('',(134.75959803934,-53.72856896065,1.585)); +#235363 = DIRECTION('',(0.,0.,-1.)); +#235364 = DIRECTION('',(-1.598967649219E-05,-0.999999999872,-0.)); +#235365 = ORIENTED_EDGE('',*,*,#235366,.T.); +#235366 = EDGE_CURVE('',#235358,#235367,#235369,.T.); +#235367 = VERTEX_POINT('',#235368); +#235368 = CARTESIAN_POINT('',(134.697512,-53.371056,1.585)); +#235369 = LINE('',#235370,#235371); +#235370 = CARTESIAN_POINT('',(134.694597,-53.72857,1.585)); +#235371 = VECTOR('',#235372,1.); +#235372 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#235373 = ORIENTED_EDGE('',*,*,#235374,.T.); +#235374 = EDGE_CURVE('',#235367,#235375,#235377,.T.); +#235375 = VERTEX_POINT('',#235376); +#235376 = CARTESIAN_POINT('',(134.750702,-53.2627,1.585)); +#235377 = LINE('',#235378,#235379); +#235378 = CARTESIAN_POINT('',(134.697512,-53.371056,1.585)); +#235379 = VECTOR('',#235380,1.); +#235380 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#235381 = ORIENTED_EDGE('',*,*,#235382,.T.); +#235382 = EDGE_CURVE('',#235375,#235290,#235383,.T.); +#235383 = LINE('',#235384,#235385); +#235384 = CARTESIAN_POINT('',(134.750702,-53.2627,1.585)); +#235385 = VECTOR('',#235386,1.); +#235386 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#235387 = FACE_BOUND('',#235388,.F.); +#235388 = EDGE_LOOP('',(#235389,#235400,#235408,#235416,#235424,#235432, + #235440)); +#235389 = ORIENTED_EDGE('',*,*,#235390,.T.); +#235390 = EDGE_CURVE('',#235391,#235393,#235395,.T.); +#235391 = VERTEX_POINT('',#235392); +#235392 = CARTESIAN_POINT('',(135.106808,-53.310562,1.585)); +#235393 = VERTEX_POINT('',#235394); +#235394 = CARTESIAN_POINT('',(134.855875,-53.3385,1.585)); +#235395 = CIRCLE('',#235396,0.180979134862); +#235396 = AXIS2_PLACEMENT_3D('',#235397,#235398,#235399); +#235397 = CARTESIAN_POINT('',(134.99569076987,-53.45341300078,1.585)); +#235398 = DIRECTION('',(0.,0.,1.)); +#235399 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#235400 = ORIENTED_EDGE('',*,*,#235401,.T.); +#235401 = EDGE_CURVE('',#235393,#235402,#235404,.T.); +#235402 = VERTEX_POINT('',#235403); +#235403 = CARTESIAN_POINT('',(134.824597,-53.401057,1.585)); +#235404 = LINE('',#235405,#235406); +#235405 = CARTESIAN_POINT('',(134.855875,-53.3385,1.585)); +#235406 = VECTOR('',#235407,1.); +#235407 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#235408 = ORIENTED_EDGE('',*,*,#235409,.T.); +#235409 = EDGE_CURVE('',#235402,#235410,#235412,.T.); +#235410 = VERTEX_POINT('',#235411); +#235411 = CARTESIAN_POINT('',(134.824597,-53.66357,1.585)); +#235412 = LINE('',#235413,#235414); +#235413 = CARTESIAN_POINT('',(134.824597,-53.401057,1.585)); +#235414 = VECTOR('',#235415,1.); +#235415 = DIRECTION('',(0.,-1.,0.)); +#235416 = ORIENTED_EDGE('',*,*,#235417,.T.); +#235417 = EDGE_CURVE('',#235410,#235418,#235420,.T.); +#235418 = VERTEX_POINT('',#235419); +#235419 = CARTESIAN_POINT('',(135.166025,-53.66357,1.585)); +#235420 = LINE('',#235421,#235422); +#235421 = CARTESIAN_POINT('',(134.824597,-53.66357,1.585)); +#235422 = VECTOR('',#235423,1.); +#235423 = DIRECTION('',(1.,0.,0.)); +#235424 = ORIENTED_EDGE('',*,*,#235425,.T.); +#235425 = EDGE_CURVE('',#235418,#235426,#235428,.T.); +#235426 = VERTEX_POINT('',#235427); +#235427 = CARTESIAN_POINT('',(135.166025,-53.401057,1.585)); +#235428 = LINE('',#235429,#235430); +#235429 = CARTESIAN_POINT('',(135.166025,-53.66357,1.585)); +#235430 = VECTOR('',#235431,1.); +#235431 = DIRECTION('',(0.,1.,0.)); +#235432 = ORIENTED_EDGE('',*,*,#235433,.T.); +#235433 = EDGE_CURVE('',#235426,#235434,#235436,.T.); +#235434 = VERTEX_POINT('',#235435); +#235435 = CARTESIAN_POINT('',(135.134746,-53.3385,1.585)); +#235436 = LINE('',#235437,#235438); +#235437 = CARTESIAN_POINT('',(135.166025,-53.401057,1.585)); +#235438 = VECTOR('',#235439,1.); +#235439 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#235440 = ORIENTED_EDGE('',*,*,#235441,.T.); +#235441 = EDGE_CURVE('',#235434,#235391,#235442,.T.); +#235442 = LINE('',#235443,#235444); +#235443 = CARTESIAN_POINT('',(135.134746,-53.3385,1.585)); +#235444 = VECTOR('',#235445,1.); +#235445 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235446 = PLANE('',#235447); +#235447 = AXIS2_PLACEMENT_3D('',#235448,#235449,#235450); +#235448 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235449 = DIRECTION('',(0.,0.,1.)); +#235450 = DIRECTION('',(1.,0.,-0.)); +#235451 = SHELL_BASED_SURFACE_MODEL('',(#235452)); +#235452 = OPEN_SHELL('',(#235453)); +#235453 = ADVANCED_FACE('',(#235454),#235726,.T.); +#235454 = FACE_BOUND('',#235455,.F.); +#235455 = EDGE_LOOP('',(#235456,#235467,#235475,#235483,#235492,#235500, + #235508,#235516,#235524,#235532,#235540,#235548,#235557,#235565, + #235573,#235581,#235589,#235597,#235606,#235614,#235622,#235631, + #235639,#235647,#235655,#235663,#235671,#235679,#235687,#235696, + #235704,#235712,#235720)); +#235456 = ORIENTED_EDGE('',*,*,#235457,.T.); +#235457 = EDGE_CURVE('',#235458,#235460,#235462,.T.); +#235458 = VERTEX_POINT('',#235459); +#235459 = CARTESIAN_POINT('',(119.39079,-53.122301,1.585)); +#235460 = VERTEX_POINT('',#235461); +#235461 = CARTESIAN_POINT('',(119.514119,-53.16341,1.585)); +#235462 = CIRCLE('',#235463,6.499998485138E-02); +#235463 = AXIS2_PLACEMENT_3D('',#235464,#235465,#235466); +#235464 = CARTESIAN_POINT('',(119.45245436584,-53.14285590248,1.585)); +#235465 = DIRECTION('',(0.,0.,-1.)); +#235466 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#235467 = ORIENTED_EDGE('',*,*,#235468,.T.); +#235468 = EDGE_CURVE('',#235460,#235469,#235471,.T.); +#235469 = VERTEX_POINT('',#235470); +#235470 = CARTESIAN_POINT('',(119.474597,-53.281975,1.585)); +#235471 = LINE('',#235472,#235473); +#235472 = CARTESIAN_POINT('',(119.514119,-53.16341,1.585)); +#235473 = VECTOR('',#235474,1.); +#235474 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#235475 = ORIENTED_EDGE('',*,*,#235476,.T.); +#235476 = EDGE_CURVE('',#235469,#235477,#235479,.T.); +#235477 = VERTEX_POINT('',#235478); +#235478 = CARTESIAN_POINT('',(119.474597,-53.470368,1.585)); +#235479 = LINE('',#235480,#235481); +#235480 = CARTESIAN_POINT('',(119.474597,-53.281975,1.585)); +#235481 = VECTOR('',#235482,1.); +#235482 = DIRECTION('',(0.,-1.,0.)); +#235483 = ORIENTED_EDGE('',*,*,#235484,.T.); +#235484 = EDGE_CURVE('',#235477,#235485,#235487,.T.); +#235485 = VERTEX_POINT('',#235486); +#235486 = CARTESIAN_POINT('',(119.59637,-53.592142,1.585)); +#235487 = CIRCLE('',#235488,0.170995888391); +#235488 = AXIS2_PLACEMENT_3D('',#235489,#235490,#235491); +#235489 = CARTESIAN_POINT('',(119.6399473225,-53.42679203534,1.585)); +#235490 = DIRECTION('',(0.,0.,1.)); +#235491 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#235492 = ORIENTED_EDGE('',*,*,#235493,.T.); +#235493 = EDGE_CURVE('',#235485,#235494,#235496,.T.); +#235494 = VERTEX_POINT('',#235495); +#235495 = CARTESIAN_POINT('',(119.651395,-53.592142,1.585)); +#235496 = LINE('',#235497,#235498); +#235497 = CARTESIAN_POINT('',(119.59637,-53.592142,1.585)); +#235498 = VECTOR('',#235499,1.); +#235499 = DIRECTION('',(1.,0.,0.)); +#235500 = ORIENTED_EDGE('',*,*,#235501,.T.); +#235501 = EDGE_CURVE('',#235494,#235502,#235504,.T.); +#235502 = VERTEX_POINT('',#235503); +#235503 = CARTESIAN_POINT('',(119.713951,-53.560864,1.585)); +#235504 = LINE('',#235505,#235506); +#235505 = CARTESIAN_POINT('',(119.651395,-53.592142,1.585)); +#235506 = VECTOR('',#235507,1.); +#235507 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#235508 = ORIENTED_EDGE('',*,*,#235509,.T.); +#235509 = EDGE_CURVE('',#235502,#235510,#235512,.T.); +#235510 = VERTEX_POINT('',#235511); +#235511 = CARTESIAN_POINT('',(119.741889,-53.532925,1.585)); +#235512 = LINE('',#235513,#235514); +#235513 = CARTESIAN_POINT('',(119.713951,-53.560864,1.585)); +#235514 = VECTOR('',#235515,1.); +#235515 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#235516 = ORIENTED_EDGE('',*,*,#235517,.T.); +#235517 = EDGE_CURVE('',#235510,#235518,#235520,.T.); +#235518 = VERTEX_POINT('',#235519); +#235519 = CARTESIAN_POINT('',(119.776839,-53.463024,1.585)); +#235520 = LINE('',#235521,#235522); +#235521 = CARTESIAN_POINT('',(119.741889,-53.532925,1.585)); +#235522 = VECTOR('',#235523,1.); +#235523 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#235524 = ORIENTED_EDGE('',*,*,#235525,.T.); +#235525 = EDGE_CURVE('',#235518,#235526,#235528,.T.); +#235526 = VERTEX_POINT('',#235527); +#235527 = CARTESIAN_POINT('',(119.822887,-53.285216,1.585)); +#235528 = LINE('',#235529,#235530); +#235529 = CARTESIAN_POINT('',(119.776839,-53.463024,1.585)); +#235530 = VECTOR('',#235531,1.); +#235531 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#235532 = ORIENTED_EDGE('',*,*,#235533,.T.); +#235533 = EDGE_CURVE('',#235526,#235534,#235536,.T.); +#235534 = VERTEX_POINT('',#235535); +#235535 = CARTESIAN_POINT('',(119.87792,-53.182609,1.585)); +#235536 = LINE('',#235537,#235538); +#235537 = CARTESIAN_POINT('',(119.822887,-53.285216,1.585)); +#235538 = VECTOR('',#235539,1.); +#235539 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#235540 = ORIENTED_EDGE('',*,*,#235541,.T.); +#235541 = EDGE_CURVE('',#235534,#235542,#235544,.T.); +#235542 = VERTEX_POINT('',#235543); +#235543 = CARTESIAN_POINT('',(119.937671,-53.127575,1.585)); +#235544 = LINE('',#235545,#235546); +#235545 = CARTESIAN_POINT('',(119.87792,-53.182609,1.585)); +#235546 = VECTOR('',#235547,1.); +#235547 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#235548 = ORIENTED_EDGE('',*,*,#235549,.T.); +#235549 = EDGE_CURVE('',#235542,#235550,#235552,.T.); +#235550 = VERTEX_POINT('',#235551); +#235551 = CARTESIAN_POINT('',(120.167237,-53.084718,1.585)); +#235552 = CIRCLE('',#235553,0.258971949836); +#235553 = AXIS2_PLACEMENT_3D('',#235554,#235555,#235556); +#235554 = CARTESIAN_POINT('',(120.09487456064,-53.33337468736,1.585)); +#235555 = DIRECTION('',(0.,0.,-1.)); +#235556 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#235557 = ORIENTED_EDGE('',*,*,#235558,.T.); +#235558 = EDGE_CURVE('',#235550,#235559,#235561,.T.); +#235559 = VERTEX_POINT('',#235560); +#235560 = CARTESIAN_POINT('',(120.269844,-53.139751,1.585)); +#235561 = LINE('',#235562,#235563); +#235562 = CARTESIAN_POINT('',(120.167237,-53.084718,1.585)); +#235563 = VECTOR('',#235564,1.); +#235564 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#235565 = ORIENTED_EDGE('',*,*,#235566,.T.); +#235566 = EDGE_CURVE('',#235559,#235567,#235569,.T.); +#235567 = VERTEX_POINT('',#235568); +#235568 = CARTESIAN_POINT('',(120.324878,-53.199502,1.585)); +#235569 = LINE('',#235570,#235571); +#235570 = CARTESIAN_POINT('',(120.269844,-53.139751,1.585)); +#235571 = VECTOR('',#235572,1.); +#235572 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#235573 = ORIENTED_EDGE('',*,*,#235574,.T.); +#235574 = EDGE_CURVE('',#235567,#235575,#235577,.T.); +#235575 = VERTEX_POINT('',#235576); +#235576 = CARTESIAN_POINT('',(120.371681,-53.299628,1.585)); +#235577 = LINE('',#235578,#235579); +#235578 = CARTESIAN_POINT('',(120.324878,-53.199502,1.585)); +#235579 = VECTOR('',#235580,1.); +#235580 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#235581 = ORIENTED_EDGE('',*,*,#235582,.T.); +#235582 = EDGE_CURVE('',#235575,#235583,#235585,.T.); +#235583 = VERTEX_POINT('',#235584); +#235584 = CARTESIAN_POINT('',(120.372563,-53.538793,1.585)); +#235585 = LINE('',#235586,#235587); +#235586 = CARTESIAN_POINT('',(120.371681,-53.299628,1.585)); +#235587 = VECTOR('',#235588,1.); +#235588 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#235589 = ORIENTED_EDGE('',*,*,#235590,.T.); +#235590 = EDGE_CURVE('',#235583,#235591,#235593,.T.); +#235591 = VERTEX_POINT('',#235592); +#235592 = CARTESIAN_POINT('',(120.328404,-53.677697,1.585)); +#235593 = LINE('',#235594,#235595); +#235594 = CARTESIAN_POINT('',(120.372563,-53.538793,1.585)); +#235595 = VECTOR('',#235596,1.); +#235596 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#235597 = ORIENTED_EDGE('',*,*,#235598,.T.); +#235598 = EDGE_CURVE('',#235591,#235599,#235601,.T.); +#235599 = VERTEX_POINT('',#235600); +#235600 = CARTESIAN_POINT('',(120.205076,-53.636587,1.585)); +#235601 = CIRCLE('',#235602,6.499966862258E-02); +#235602 = AXIS2_PLACEMENT_3D('',#235603,#235604,#235605); +#235603 = CARTESIAN_POINT('',(120.26674006734,-53.65714179797,1.585)); +#235604 = DIRECTION('',(-0.,0.,-1.)); +#235605 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#235606 = ORIENTED_EDGE('',*,*,#235607,.T.); +#235607 = EDGE_CURVE('',#235599,#235608,#235610,.T.); +#235608 = VERTEX_POINT('',#235609); +#235609 = CARTESIAN_POINT('',(120.244597,-53.518024,1.585)); +#235610 = LINE('',#235611,#235612); +#235611 = CARTESIAN_POINT('',(120.205076,-53.636587,1.585)); +#235612 = VECTOR('',#235613,1.); +#235613 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#235614 = ORIENTED_EDGE('',*,*,#235615,.T.); +#235615 = EDGE_CURVE('',#235608,#235616,#235618,.T.); +#235616 = VERTEX_POINT('',#235617); +#235617 = CARTESIAN_POINT('',(120.244597,-53.32963,1.585)); +#235618 = LINE('',#235619,#235620); +#235619 = CARTESIAN_POINT('',(120.244597,-53.518024,1.585)); +#235620 = VECTOR('',#235621,1.); +#235621 = DIRECTION('',(0.,1.,0.)); +#235622 = ORIENTED_EDGE('',*,*,#235623,.T.); +#235623 = EDGE_CURVE('',#235616,#235624,#235626,.T.); +#235624 = VERTEX_POINT('',#235625); +#235625 = CARTESIAN_POINT('',(120.122823,-53.207856,1.585)); +#235626 = CIRCLE('',#235627,0.170999251022); +#235627 = AXIS2_PLACEMENT_3D('',#235628,#235629,#235630); +#235628 = CARTESIAN_POINT('',(120.079244,-53.373209,1.585)); +#235629 = DIRECTION('',(0.,0.,1.)); +#235630 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#235631 = ORIENTED_EDGE('',*,*,#235632,.T.); +#235632 = EDGE_CURVE('',#235624,#235633,#235635,.T.); +#235633 = VERTEX_POINT('',#235634); +#235634 = CARTESIAN_POINT('',(120.067799,-53.207856,1.585)); +#235635 = LINE('',#235636,#235637); +#235636 = CARTESIAN_POINT('',(120.122823,-53.207856,1.585)); +#235637 = VECTOR('',#235638,1.); +#235638 = DIRECTION('',(-1.,0.,0.)); +#235639 = ORIENTED_EDGE('',*,*,#235640,.T.); +#235640 = EDGE_CURVE('',#235633,#235641,#235643,.T.); +#235641 = VERTEX_POINT('',#235642); +#235642 = CARTESIAN_POINT('',(120.005243,-53.239134,1.585)); +#235643 = LINE('',#235644,#235645); +#235644 = CARTESIAN_POINT('',(120.067799,-53.207856,1.585)); +#235645 = VECTOR('',#235646,1.); +#235646 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#235647 = ORIENTED_EDGE('',*,*,#235648,.T.); +#235648 = EDGE_CURVE('',#235641,#235649,#235651,.T.); +#235649 = VERTEX_POINT('',#235650); +#235650 = CARTESIAN_POINT('',(119.977303,-53.267074,1.585)); +#235651 = LINE('',#235652,#235653); +#235652 = CARTESIAN_POINT('',(120.005243,-53.239134,1.585)); +#235653 = VECTOR('',#235654,1.); +#235654 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#235655 = ORIENTED_EDGE('',*,*,#235656,.T.); +#235656 = EDGE_CURVE('',#235649,#235657,#235659,.T.); +#235657 = VERTEX_POINT('',#235658); +#235658 = CARTESIAN_POINT('',(119.942353,-53.336974,1.585)); +#235659 = LINE('',#235660,#235661); +#235660 = CARTESIAN_POINT('',(119.977303,-53.267074,1.585)); +#235661 = VECTOR('',#235662,1.); +#235662 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#235663 = ORIENTED_EDGE('',*,*,#235664,.T.); +#235664 = EDGE_CURVE('',#235657,#235665,#235667,.T.); +#235665 = VERTEX_POINT('',#235666); +#235666 = CARTESIAN_POINT('',(119.896306,-53.514782,1.585)); +#235667 = LINE('',#235668,#235669); +#235668 = CARTESIAN_POINT('',(119.942353,-53.336974,1.585)); +#235669 = VECTOR('',#235670,1.); +#235670 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#235671 = ORIENTED_EDGE('',*,*,#235672,.T.); +#235672 = EDGE_CURVE('',#235665,#235673,#235675,.T.); +#235673 = VERTEX_POINT('',#235674); +#235674 = CARTESIAN_POINT('',(119.841273,-53.61739,1.585)); +#235675 = LINE('',#235676,#235677); +#235676 = CARTESIAN_POINT('',(119.896306,-53.514782,1.585)); +#235677 = VECTOR('',#235678,1.); +#235678 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#235679 = ORIENTED_EDGE('',*,*,#235680,.T.); +#235680 = EDGE_CURVE('',#235673,#235681,#235683,.T.); +#235681 = VERTEX_POINT('',#235682); +#235682 = CARTESIAN_POINT('',(119.781523,-53.672423,1.585)); +#235683 = LINE('',#235684,#235685); +#235684 = CARTESIAN_POINT('',(119.841273,-53.61739,1.585)); +#235685 = VECTOR('',#235686,1.); +#235686 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#235687 = ORIENTED_EDGE('',*,*,#235688,.T.); +#235688 = EDGE_CURVE('',#235681,#235689,#235691,.T.); +#235689 = VERTEX_POINT('',#235690); +#235690 = CARTESIAN_POINT('',(119.458013,-53.666036,1.585)); +#235691 = CIRCLE('',#235692,0.260197694649); +#235692 = AXIS2_PLACEMENT_3D('',#235693,#235694,#235695); +#235693 = CARTESIAN_POINT('',(119.62379048924,-53.46548509783,1.585)); +#235694 = DIRECTION('',(-0.,0.,-1.)); +#235695 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#235696 = ORIENTED_EDGE('',*,*,#235697,.T.); +#235697 = EDGE_CURVE('',#235689,#235698,#235700,.T.); +#235698 = VERTEX_POINT('',#235699); +#235699 = CARTESIAN_POINT('',(119.400702,-53.608725,1.585)); +#235700 = LINE('',#235701,#235702); +#235701 = CARTESIAN_POINT('',(119.458013,-53.666036,1.585)); +#235702 = VECTOR('',#235703,1.); +#235703 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235704 = ORIENTED_EDGE('',*,*,#235705,.T.); +#235705 = EDGE_CURVE('',#235698,#235706,#235708,.T.); +#235706 = VERTEX_POINT('',#235707); +#235707 = CARTESIAN_POINT('',(119.347512,-53.500369,1.585)); +#235708 = LINE('',#235709,#235710); +#235709 = CARTESIAN_POINT('',(119.400702,-53.608725,1.585)); +#235710 = VECTOR('',#235711,1.); +#235711 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#235712 = ORIENTED_EDGE('',*,*,#235713,.T.); +#235713 = EDGE_CURVE('',#235706,#235714,#235716,.T.); +#235714 = VERTEX_POINT('',#235715); +#235715 = CARTESIAN_POINT('',(119.34663,-53.261205,1.585)); +#235716 = LINE('',#235717,#235718); +#235717 = CARTESIAN_POINT('',(119.347512,-53.500369,1.585)); +#235718 = VECTOR('',#235719,1.); +#235719 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#235720 = ORIENTED_EDGE('',*,*,#235721,.T.); +#235721 = EDGE_CURVE('',#235714,#235458,#235722,.T.); +#235722 = LINE('',#235723,#235724); +#235723 = CARTESIAN_POINT('',(119.34663,-53.261205,1.585)); +#235724 = VECTOR('',#235725,1.); +#235725 = DIRECTION('',(0.302974833624,0.952998557287,0.)); +#235726 = PLANE('',#235727); +#235727 = AXIS2_PLACEMENT_3D('',#235728,#235729,#235730); +#235728 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235729 = DIRECTION('',(0.,0.,1.)); +#235730 = DIRECTION('',(1.,0.,-0.)); +#235731 = SHELL_BASED_SURFACE_MODEL('',(#235732)); +#235732 = OPEN_SHELL('',(#235733)); +#235733 = ADVANCED_FACE('',(#235734),#235904,.T.); +#235734 = FACE_BOUND('',#235735,.F.); +#235735 = EDGE_LOOP('',(#235736,#235747,#235755,#235764,#235772,#235781, + #235789,#235797,#235805,#235814,#235822,#235831,#235839,#235848, + #235856,#235865,#235873,#235881,#235889,#235898)); +#235736 = ORIENTED_EDGE('',*,*,#235737,.T.); +#235737 = EDGE_CURVE('',#235738,#235740,#235742,.T.); +#235738 = VERTEX_POINT('',#235739); +#235739 = CARTESIAN_POINT('',(121.949349,-53.032608,1.585)); +#235740 = VERTEX_POINT('',#235741); +#235741 = CARTESIAN_POINT('',(122.041273,-53.124532,1.585)); +#235742 = CIRCLE('',#235743,6.50000837538E-02); +#235743 = AXIS2_PLACEMENT_3D('',#235744,#235745,#235746); +#235744 = CARTESIAN_POINT('',(121.99531098493,-53.07857001506,1.585)); +#235745 = DIRECTION('',(0.,0.,-1.)); +#235746 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#235747 = ORIENTED_EDGE('',*,*,#235748,.T.); +#235748 = EDGE_CURVE('',#235740,#235749,#235751,.T.); +#235749 = VERTEX_POINT('',#235750); +#235750 = CARTESIAN_POINT('',(122.009266,-53.156538,1.585)); +#235751 = LINE('',#235752,#235753); +#235752 = CARTESIAN_POINT('',(122.041273,-53.124532,1.585)); +#235753 = VECTOR('',#235754,1.); +#235754 = DIRECTION('',(-0.7071178274,-0.7070957348,0.)); +#235755 = ORIENTED_EDGE('',*,*,#235756,.T.); +#235756 = EDGE_CURVE('',#235749,#235757,#235759,.T.); +#235757 = VERTEX_POINT('',#235758); +#235758 = CARTESIAN_POINT('',(122.009265,-53.429171,1.585)); +#235759 = CIRCLE('',#235760,0.272201331757); +#235760 = AXIS2_PLACEMENT_3D('',#235761,#235762,#235763); +#235761 = CARTESIAN_POINT('',(122.24487402454,-53.29285536419,1.585)); +#235762 = DIRECTION('',(0.,0.,1.)); +#235763 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#235764 = ORIENTED_EDGE('',*,*,#235765,.T.); +#235765 = EDGE_CURVE('',#235757,#235766,#235768,.T.); +#235766 = VERTEX_POINT('',#235767); +#235767 = CARTESIAN_POINT('',(122.076669,-53.496577,1.585)); +#235768 = LINE('',#235769,#235770); +#235769 = CARTESIAN_POINT('',(122.009265,-53.429171,1.585)); +#235770 = VECTOR('',#235771,1.); +#235771 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#235772 = ORIENTED_EDGE('',*,*,#235773,.T.); +#235773 = EDGE_CURVE('',#235766,#235774,#235776,.T.); +#235774 = VERTEX_POINT('',#235775); +#235775 = CARTESIAN_POINT('',(122.415881,-53.570713,1.585)); +#235776 = CIRCLE('',#235777,0.553317785495); +#235777 = AXIS2_PLACEMENT_3D('',#235778,#235779,#235780); +#235778 = CARTESIAN_POINT('',(122.3584500839,-53.02038376979,1.585)); +#235779 = DIRECTION('',(0.,0.,1.)); +#235780 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#235781 = ORIENTED_EDGE('',*,*,#235782,.T.); +#235782 = EDGE_CURVE('',#235774,#235783,#235785,.T.); +#235783 = VERTEX_POINT('',#235784); +#235784 = CARTESIAN_POINT('',(122.572622,-53.531527,1.585)); +#235785 = LINE('',#235786,#235787); +#235786 = CARTESIAN_POINT('',(122.415881,-53.570713,1.585)); +#235787 = VECTOR('',#235788,1.); +#235788 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#235789 = ORIENTED_EDGE('',*,*,#235790,.T.); +#235790 = EDGE_CURVE('',#235783,#235791,#235793,.T.); +#235791 = VERTEX_POINT('',#235792); +#235792 = CARTESIAN_POINT('',(122.642522,-53.496578,1.585)); +#235793 = LINE('',#235794,#235795); +#235794 = CARTESIAN_POINT('',(122.572622,-53.531527,1.585)); +#235795 = VECTOR('',#235796,1.); +#235796 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#235797 = ORIENTED_EDGE('',*,*,#235798,.T.); +#235798 = EDGE_CURVE('',#235791,#235799,#235801,.T.); +#235799 = VERTEX_POINT('',#235800); +#235800 = CARTESIAN_POINT('',(122.709928,-53.429171,1.585)); +#235801 = LINE('',#235802,#235803); +#235802 = CARTESIAN_POINT('',(122.642522,-53.496578,1.585)); +#235803 = VECTOR('',#235804,1.); +#235804 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#235805 = ORIENTED_EDGE('',*,*,#235806,.T.); +#235806 = EDGE_CURVE('',#235799,#235807,#235809,.T.); +#235807 = VERTEX_POINT('',#235808); +#235808 = CARTESIAN_POINT('',(122.709928,-53.156539,1.585)); +#235809 = CIRCLE('',#235810,0.272194686174); +#235810 = AXIS2_PLACEMENT_3D('',#235811,#235812,#235813); +#235811 = CARTESIAN_POINT('',(122.47432686391,-53.292855,1.585)); +#235812 = DIRECTION('',(0.,-0.,1.)); +#235813 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#235814 = ORIENTED_EDGE('',*,*,#235815,.T.); +#235815 = EDGE_CURVE('',#235807,#235816,#235818,.T.); +#235816 = VERTEX_POINT('',#235817); +#235817 = CARTESIAN_POINT('',(122.677921,-53.124532,1.585)); +#235818 = LINE('',#235819,#235820); +#235819 = CARTESIAN_POINT('',(122.709928,-53.156539,1.585)); +#235820 = VECTOR('',#235821,1.); +#235821 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#235822 = ORIENTED_EDGE('',*,*,#235823,.T.); +#235823 = EDGE_CURVE('',#235816,#235824,#235826,.T.); +#235824 = VERTEX_POINT('',#235825); +#235825 = CARTESIAN_POINT('',(122.769843,-53.032608,1.585)); +#235826 = CIRCLE('',#235827,6.499937665169E-02); +#235827 = AXIS2_PLACEMENT_3D('',#235828,#235829,#235830); +#235828 = CARTESIAN_POINT('',(122.72388176676,-53.07856976677,1.585)); +#235829 = DIRECTION('',(0.,0.,-1.)); +#235830 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#235831 = ORIENTED_EDGE('',*,*,#235832,.T.); +#235832 = EDGE_CURVE('',#235824,#235833,#235835,.T.); +#235833 = VERTEX_POINT('',#235834); +#235834 = CARTESIAN_POINT('',(122.821003,-53.087889,1.585)); +#235835 = LINE('',#235836,#235837); +#235836 = CARTESIAN_POINT('',(122.769843,-53.032608,1.585)); +#235837 = VECTOR('',#235838,1.); +#235838 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#235839 = ORIENTED_EDGE('',*,*,#235840,.T.); +#235840 = EDGE_CURVE('',#235833,#235841,#235843,.T.); +#235841 = VERTEX_POINT('',#235842); +#235842 = CARTESIAN_POINT('',(122.820999,-53.497827,1.585)); +#235843 = CIRCLE('',#235844,0.409312568567); +#235844 = AXIS2_PLACEMENT_3D('',#235845,#235846,#235847); +#235845 = CARTESIAN_POINT('',(122.46670664806,-53.29285454294,1.585)); +#235846 = DIRECTION('',(0.,0.,-1.)); +#235847 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#235848 = ORIENTED_EDGE('',*,*,#235849,.T.); +#235849 = EDGE_CURVE('',#235841,#235850,#235852,.T.); +#235850 = VERTEX_POINT('',#235851); +#235851 = CARTESIAN_POINT('',(122.718322,-53.60175,1.585)); +#235852 = LINE('',#235853,#235854); +#235853 = CARTESIAN_POINT('',(122.820999,-53.497827,1.585)); +#235854 = VECTOR('',#235855,1.); +#235855 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#235856 = ORIENTED_EDGE('',*,*,#235857,.T.); +#235857 = EDGE_CURVE('',#235850,#235858,#235860,.T.); +#235858 = VERTEX_POINT('',#235859); +#235859 = CARTESIAN_POINT('',(122.279546,-53.698772,1.585)); +#235860 = CIRCLE('',#235861,0.675422176574); +#235861 = AXIS2_PLACEMENT_3D('',#235862,#235863,#235864); +#235862 = CARTESIAN_POINT('',(122.36141275007,-53.02832964465,1.585)); +#235863 = DIRECTION('',(0.,0.,-1.)); +#235864 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#235865 = ORIENTED_EDGE('',*,*,#235866,.T.); +#235866 = EDGE_CURVE('',#235858,#235867,#235869,.T.); +#235867 = VERTEX_POINT('',#235868); +#235868 = CARTESIAN_POINT('',(122.094813,-53.650994,1.585)); +#235869 = LINE('',#235870,#235871); +#235870 = CARTESIAN_POINT('',(122.279546,-53.698772,1.585)); +#235871 = VECTOR('',#235872,1.); +#235872 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#235873 = ORIENTED_EDGE('',*,*,#235874,.T.); +#235874 = EDGE_CURVE('',#235867,#235875,#235877,.T.); +#235875 = VERTEX_POINT('',#235876); +#235876 = CARTESIAN_POINT('',(121.992206,-53.595961,1.585)); +#235877 = LINE('',#235878,#235879); +#235878 = CARTESIAN_POINT('',(122.094813,-53.650994,1.585)); +#235879 = VECTOR('',#235880,1.); +#235880 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#235881 = ORIENTED_EDGE('',*,*,#235882,.T.); +#235882 = EDGE_CURVE('',#235875,#235883,#235885,.T.); +#235883 = VERTEX_POINT('',#235884); +#235884 = CARTESIAN_POINT('',(121.898191,-53.497823,1.585)); +#235885 = LINE('',#235886,#235887); +#235886 = CARTESIAN_POINT('',(121.992206,-53.595961,1.585)); +#235887 = VECTOR('',#235888,1.); +#235888 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#235889 = ORIENTED_EDGE('',*,*,#235890,.T.); +#235890 = EDGE_CURVE('',#235883,#235891,#235893,.T.); +#235891 = VERTEX_POINT('',#235892); +#235892 = CARTESIAN_POINT('',(121.898194,-53.087883,1.585)); +#235893 = CIRCLE('',#235894,0.409312909751); +#235894 = AXIS2_PLACEMENT_3D('',#235895,#235896,#235897); +#235895 = CARTESIAN_POINT('',(122.25248666757,-53.29285559277,1.585)); +#235896 = DIRECTION('',(0.,0.,-1.)); +#235897 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#235898 = ORIENTED_EDGE('',*,*,#235899,.T.); +#235899 = EDGE_CURVE('',#235891,#235738,#235900,.T.); +#235900 = LINE('',#235901,#235902); +#235901 = CARTESIAN_POINT('',(121.898194,-53.087883,1.585)); +#235902 = VECTOR('',#235903,1.); +#235903 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#235904 = PLANE('',#235905); +#235905 = AXIS2_PLACEMENT_3D('',#235906,#235907,#235908); +#235906 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235907 = DIRECTION('',(0.,0.,1.)); +#235908 = DIRECTION('',(1.,0.,-0.)); +#235909 = SHELL_BASED_SURFACE_MODEL('',(#235910)); +#235910 = OPEN_SHELL('',(#235911)); +#235911 = ADVANCED_FACE('',(#235912),#235956,.T.); +#235912 = FACE_BOUND('',#235913,.F.); +#235913 = EDGE_LOOP('',(#235914,#235925,#235933,#235942,#235950)); +#235914 = ORIENTED_EDGE('',*,*,#235915,.T.); +#235915 = EDGE_CURVE('',#235916,#235918,#235920,.T.); +#235916 = VERTEX_POINT('',#235917); +#235917 = CARTESIAN_POINT('',(124.976688,-52.903697,1.585)); +#235918 = VERTEX_POINT('',#235919); +#235919 = CARTESIAN_POINT('',(125.10174,-52.928571,1.585)); +#235920 = CIRCLE('',#235921,6.499988811649E-02); +#235921 = AXIS2_PLACEMENT_3D('',#235922,#235923,#235924); +#235922 = CARTESIAN_POINT('',(125.03674011188,-52.9285712701,1.585)); +#235923 = DIRECTION('',(0.,0.,-1.)); +#235924 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#235925 = ORIENTED_EDGE('',*,*,#235926,.T.); +#235926 = EDGE_CURVE('',#235918,#235927,#235929,.T.); +#235927 = VERTEX_POINT('',#235928); +#235928 = CARTESIAN_POINT('',(125.10174,-53.614285,1.585)); +#235929 = LINE('',#235930,#235931); +#235930 = CARTESIAN_POINT('',(125.10174,-52.928571,1.585)); +#235931 = VECTOR('',#235932,1.); +#235932 = DIRECTION('',(0.,-1.,0.)); +#235933 = ORIENTED_EDGE('',*,*,#235934,.T.); +#235934 = EDGE_CURVE('',#235927,#235935,#235937,.T.); +#235935 = VERTEX_POINT('',#235936); +#235936 = CARTESIAN_POINT('',(124.97174,-53.614285,1.585)); +#235937 = CIRCLE('',#235938,6.500000000092E-02); +#235938 = AXIS2_PLACEMENT_3D('',#235939,#235940,#235941); +#235939 = CARTESIAN_POINT('',(125.03674,-53.61428465513,1.585)); +#235940 = DIRECTION('',(-0.,0.,-1.)); +#235941 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#235942 = ORIENTED_EDGE('',*,*,#235943,.T.); +#235943 = EDGE_CURVE('',#235935,#235944,#235946,.T.); +#235944 = VERTEX_POINT('',#235945); +#235945 = CARTESIAN_POINT('',(124.97174,-52.928571,1.585)); +#235946 = LINE('',#235947,#235948); +#235947 = CARTESIAN_POINT('',(124.97174,-53.614285,1.585)); +#235948 = VECTOR('',#235949,1.); +#235949 = DIRECTION('',(0.,1.,0.)); +#235950 = ORIENTED_EDGE('',*,*,#235951,.T.); +#235951 = EDGE_CURVE('',#235944,#235916,#235952,.T.); +#235952 = LINE('',#235953,#235954); +#235953 = CARTESIAN_POINT('',(124.97174,-52.928571,1.585)); +#235954 = VECTOR('',#235955,1.); +#235955 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#235956 = PLANE('',#235957); +#235957 = AXIS2_PLACEMENT_3D('',#235958,#235959,#235960); +#235958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#235959 = DIRECTION('',(0.,0.,1.)); +#235960 = DIRECTION('',(1.,0.,-0.)); +#235961 = SHELL_BASED_SURFACE_MODEL('',(#235962)); +#235962 = OPEN_SHELL('',(#235963)); +#235963 = ADVANCED_FACE('',(#235964),#236008,.T.); +#235964 = FACE_BOUND('',#235965,.F.); +#235965 = EDGE_LOOP('',(#235966,#235977,#235985,#235994,#236002)); +#235966 = ORIENTED_EDGE('',*,*,#235967,.T.); +#235967 = EDGE_CURVE('',#235968,#235970,#235972,.T.); +#235968 = VERTEX_POINT('',#235969); +#235969 = CARTESIAN_POINT('',(175.276217,-53.309559,1.585)); +#235970 = VERTEX_POINT('',#235971); +#235971 = CARTESIAN_POINT('',(175.39165,-53.33252,1.585)); +#235972 = CIRCLE('',#235973,6.000007318647E-02); +#235973 = AXIS2_PLACEMENT_3D('',#235974,#235975,#235976); +#235974 = CARTESIAN_POINT('',(175.33164992681,-53.33251982331,1.585)); +#235975 = DIRECTION('',(0.,0.,-1.)); +#235976 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#235977 = ORIENTED_EDGE('',*,*,#235978,.T.); +#235978 = EDGE_CURVE('',#235970,#235979,#235981,.T.); +#235979 = VERTEX_POINT('',#235980); +#235980 = CARTESIAN_POINT('',(175.39165,-53.61368,1.585)); +#235981 = LINE('',#235982,#235983); +#235982 = CARTESIAN_POINT('',(175.39165,-53.33252,1.585)); +#235983 = VECTOR('',#235984,1.); +#235984 = DIRECTION('',(0.,-1.,0.)); +#235985 = ORIENTED_EDGE('',*,*,#235986,.T.); +#235986 = EDGE_CURVE('',#235979,#235987,#235989,.T.); +#235987 = VERTEX_POINT('',#235988); +#235988 = CARTESIAN_POINT('',(175.27165,-53.61368,1.585)); +#235989 = CIRCLE('',#235990,6.000000000043E-02); +#235990 = AXIS2_PLACEMENT_3D('',#235991,#235992,#235993); +#235991 = CARTESIAN_POINT('',(175.33165,-53.61368022558,1.585)); +#235992 = DIRECTION('',(0.,0.,-1.)); +#235993 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#235994 = ORIENTED_EDGE('',*,*,#235995,.T.); +#235995 = EDGE_CURVE('',#235987,#235996,#235998,.T.); +#235996 = VERTEX_POINT('',#235997); +#235997 = CARTESIAN_POINT('',(175.27165,-53.33252,1.585)); +#235998 = LINE('',#235999,#236000); +#235999 = CARTESIAN_POINT('',(175.27165,-53.61368,1.585)); +#236000 = VECTOR('',#236001,1.); +#236001 = DIRECTION('',(0.,1.,0.)); +#236002 = ORIENTED_EDGE('',*,*,#236003,.T.); +#236003 = EDGE_CURVE('',#235996,#235968,#236004,.T.); +#236004 = LINE('',#236005,#236006); +#236005 = CARTESIAN_POINT('',(175.27165,-53.33252,1.585)); +#236006 = VECTOR('',#236007,1.); +#236007 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#236008 = PLANE('',#236009); +#236009 = AXIS2_PLACEMENT_3D('',#236010,#236011,#236012); +#236010 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236011 = DIRECTION('',(0.,0.,1.)); +#236012 = DIRECTION('',(1.,0.,-0.)); +#236013 = SHELL_BASED_SURFACE_MODEL('',(#236014)); +#236014 = OPEN_SHELL('',(#236015)); +#236015 = ADVANCED_FACE('',(#236016),#236060,.T.); +#236016 = FACE_BOUND('',#236017,.F.); +#236017 = EDGE_LOOP('',(#236018,#236029,#236037,#236046,#236054)); +#236018 = ORIENTED_EDGE('',*,*,#236019,.T.); +#236019 = EDGE_CURVE('',#236020,#236022,#236024,.T.); +#236020 = VERTEX_POINT('',#236021); +#236021 = CARTESIAN_POINT('',(176.296217,-53.309559,1.585)); +#236022 = VERTEX_POINT('',#236023); +#236023 = CARTESIAN_POINT('',(176.41165,-53.33252,1.585)); +#236024 = CIRCLE('',#236025,6.000007318647E-02); +#236025 = AXIS2_PLACEMENT_3D('',#236026,#236027,#236028); +#236026 = CARTESIAN_POINT('',(176.35164992681,-53.33251982331,1.585)); +#236027 = DIRECTION('',(0.,0.,-1.)); +#236028 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#236029 = ORIENTED_EDGE('',*,*,#236030,.T.); +#236030 = EDGE_CURVE('',#236022,#236031,#236033,.T.); +#236031 = VERTEX_POINT('',#236032); +#236032 = CARTESIAN_POINT('',(176.41165,-53.61368,1.585)); +#236033 = LINE('',#236034,#236035); +#236034 = CARTESIAN_POINT('',(176.41165,-53.33252,1.585)); +#236035 = VECTOR('',#236036,1.); +#236036 = DIRECTION('',(0.,-1.,0.)); +#236037 = ORIENTED_EDGE('',*,*,#236038,.T.); +#236038 = EDGE_CURVE('',#236031,#236039,#236041,.T.); +#236039 = VERTEX_POINT('',#236040); +#236040 = CARTESIAN_POINT('',(176.29165,-53.61368,1.585)); +#236041 = CIRCLE('',#236042,6.000000000043E-02); +#236042 = AXIS2_PLACEMENT_3D('',#236043,#236044,#236045); +#236043 = CARTESIAN_POINT('',(176.35165,-53.61368022558,1.585)); +#236044 = DIRECTION('',(0.,0.,-1.)); +#236045 = DIRECTION('',(0.999999999993,3.759793898412E-06,0.)); +#236046 = ORIENTED_EDGE('',*,*,#236047,.T.); +#236047 = EDGE_CURVE('',#236039,#236048,#236050,.T.); +#236048 = VERTEX_POINT('',#236049); +#236049 = CARTESIAN_POINT('',(176.29165,-53.33252,1.585)); +#236050 = LINE('',#236051,#236052); +#236051 = CARTESIAN_POINT('',(176.29165,-53.61368,1.585)); +#236052 = VECTOR('',#236053,1.); +#236053 = DIRECTION('',(0.,1.,0.)); +#236054 = ORIENTED_EDGE('',*,*,#236055,.T.); +#236055 = EDGE_CURVE('',#236048,#236020,#236056,.T.); +#236056 = LINE('',#236057,#236058); +#236057 = CARTESIAN_POINT('',(176.29165,-53.33252,1.585)); +#236058 = VECTOR('',#236059,1.); +#236059 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#236060 = PLANE('',#236061); +#236061 = AXIS2_PLACEMENT_3D('',#236062,#236063,#236064); +#236062 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236063 = DIRECTION('',(0.,0.,1.)); +#236064 = DIRECTION('',(1.,0.,-0.)); +#236065 = SHELL_BASED_SURFACE_MODEL('',(#236066)); +#236066 = OPEN_SHELL('',(#236067)); +#236067 = ADVANCED_FACE('',(#236068),#236145,.T.); +#236068 = FACE_BOUND('',#236069,.F.); +#236069 = EDGE_LOOP('',(#236070,#236081,#236089,#236098,#236106,#236115, + #236123,#236131,#236139)); +#236070 = ORIENTED_EDGE('',*,*,#236071,.T.); +#236071 = EDGE_CURVE('',#236072,#236074,#236076,.T.); +#236072 = VERTEX_POINT('',#236073); +#236073 = CARTESIAN_POINT('',(129.494761,-53.004606,1.585)); +#236074 = VERTEX_POINT('',#236075); +#236075 = CARTESIAN_POINT('',(129.580152,-52.938335,1.585)); +#236076 = CIRCLE('',#236077,6.499990070435E-02); +#236077 = AXIS2_PLACEMENT_3D('',#236078,#236079,#236080); +#236078 = CARTESIAN_POINT('',(129.55959745813,-52.99999939734,1.585)); +#236079 = DIRECTION('',(0.,0.,-1.)); +#236080 = DIRECTION('',(-0.997485495103,-7.087091829089E-02,-0.)); +#236081 = ORIENTED_EDGE('',*,*,#236082,.T.); +#236082 = EDGE_CURVE('',#236074,#236083,#236085,.T.); +#236083 = VERTEX_POINT('',#236084); +#236084 = CARTESIAN_POINT('',(130.480152,-53.238334,1.585)); +#236085 = LINE('',#236086,#236087); +#236086 = CARTESIAN_POINT('',(129.580152,-52.938335,1.585)); +#236087 = VECTOR('',#236088,1.); +#236088 = DIRECTION('',(0.948683614278,-0.316226817333,0.)); +#236089 = ORIENTED_EDGE('',*,*,#236090,.T.); +#236090 = EDGE_CURVE('',#236083,#236091,#236093,.T.); +#236091 = VERTEX_POINT('',#236092); +#236092 = CARTESIAN_POINT('',(130.480152,-53.361664,1.585)); +#236093 = CIRCLE('',#236094,6.500111611217E-02); +#236094 = AXIS2_PLACEMENT_3D('',#236095,#236096,#236097); +#236095 = CARTESIAN_POINT('',(130.45959542268,-53.299999,1.585)); +#236096 = DIRECTION('',(0.,0.,-1.)); +#236097 = DIRECTION('',(0.316249605278,0.948676018018,0.)); +#236098 = ORIENTED_EDGE('',*,*,#236099,.T.); +#236099 = EDGE_CURVE('',#236091,#236100,#236102,.T.); +#236100 = VERTEX_POINT('',#236101); +#236101 = CARTESIAN_POINT('',(129.580152,-53.661663,1.585)); +#236102 = LINE('',#236103,#236104); +#236103 = CARTESIAN_POINT('',(130.480152,-53.361664,1.585)); +#236104 = VECTOR('',#236105,1.); +#236105 = DIRECTION('',(-0.948683614278,-0.316226817333,0.)); +#236106 = ORIENTED_EDGE('',*,*,#236107,.T.); +#236107 = EDGE_CURVE('',#236100,#236108,#236110,.T.); +#236108 = VERTEX_POINT('',#236109); +#236109 = CARTESIAN_POINT('',(129.539042,-53.538335,1.585)); +#236110 = CIRCLE('',#236111,6.499966862238E-02); +#236111 = AXIS2_PLACEMENT_3D('',#236112,#236113,#236114); +#236112 = CARTESIAN_POINT('',(129.55959712923,-53.59999895692,1.585)); +#236113 = DIRECTION('',(0.,0.,-1.)); +#236114 = DIRECTION('',(0.316230393205,-0.948682422317,0.)); +#236115 = ORIENTED_EDGE('',*,*,#236116,.T.); +#236116 = EDGE_CURVE('',#236108,#236117,#236119,.T.); +#236117 = VERTEX_POINT('',#236118); +#236118 = CARTESIAN_POINT('',(130.25405,-53.299999,1.585)); +#236119 = LINE('',#236120,#236121); +#236120 = CARTESIAN_POINT('',(129.539042,-53.538335,1.585)); +#236121 = VECTOR('',#236122,1.); +#236122 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#236123 = ORIENTED_EDGE('',*,*,#236124,.T.); +#236124 = EDGE_CURVE('',#236117,#236125,#236127,.T.); +#236125 = VERTEX_POINT('',#236126); +#236126 = CARTESIAN_POINT('',(129.539042,-53.061663,1.585)); +#236127 = LINE('',#236128,#236129); +#236128 = CARTESIAN_POINT('',(130.25405,-53.299999,1.585)); +#236129 = VECTOR('',#236130,1.); +#236130 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#236131 = ORIENTED_EDGE('',*,*,#236132,.T.); +#236132 = EDGE_CURVE('',#236125,#236133,#236135,.T.); +#236133 = VERTEX_POINT('',#236134); +#236134 = CARTESIAN_POINT('',(129.517009,-53.049103,1.585)); +#236135 = LINE('',#236136,#236137); +#236136 = CARTESIAN_POINT('',(129.539042,-53.061663,1.585)); +#236137 = VECTOR('',#236138,1.); +#236138 = DIRECTION('',(-0.868757082859,0.495238458708,0.)); +#236139 = ORIENTED_EDGE('',*,*,#236140,.T.); +#236140 = EDGE_CURVE('',#236133,#236072,#236141,.T.); +#236141 = LINE('',#236142,#236143); +#236142 = CARTESIAN_POINT('',(129.517009,-53.049103,1.585)); +#236143 = VECTOR('',#236144,1.); +#236144 = DIRECTION('',(-0.447205555109,0.89443121115,0.)); +#236145 = PLANE('',#236146); +#236146 = AXIS2_PLACEMENT_3D('',#236147,#236148,#236149); +#236147 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236148 = DIRECTION('',(0.,0.,1.)); +#236149 = DIRECTION('',(1.,0.,-0.)); +#236150 = SHELL_BASED_SURFACE_MODEL('',(#236151)); +#236151 = OPEN_SHELL('',(#236152)); +#236152 = ADVANCED_FACE('',(#236153,#236287),#236346,.T.); +#236153 = FACE_BOUND('',#236154,.F.); +#236154 = EDGE_LOOP('',(#236155,#236166,#236174,#236182,#236190,#236198, + #236206,#236215,#236223,#236231,#236239,#236248,#236256,#236265, + #236273,#236281)); +#236155 = ORIENTED_EDGE('',*,*,#236156,.T.); +#236156 = EDGE_CURVE('',#236157,#236159,#236161,.T.); +#236157 = VERTEX_POINT('',#236158); +#236158 = CARTESIAN_POINT('',(116.908013,-53.062533,1.585)); +#236159 = VERTEX_POINT('',#236160); +#236160 = CARTESIAN_POINT('',(117.188666,-53.01329,1.585)); +#236161 = CIRCLE('',#236162,0.327183487819); +#236162 = AXIS2_PLACEMENT_3D('',#236163,#236164,#236165); +#236163 = CARTESIAN_POINT('',(117.09924076591,-53.32801553472,1.585)); +#236164 = DIRECTION('',(0.,0.,-1.)); +#236165 = DIRECTION('',(-0.584466432542,0.811417888163,0.)); +#236166 = ORIENTED_EDGE('',*,*,#236167,.T.); +#236167 = EDGE_CURVE('',#236159,#236168,#236170,.T.); +#236168 = VERTEX_POINT('',#236169); +#236169 = CARTESIAN_POINT('',(117.291273,-53.068323,1.585)); +#236170 = LINE('',#236171,#236172); +#236171 = CARTESIAN_POINT('',(117.188666,-53.01329,1.585)); +#236172 = VECTOR('',#236173,1.); +#236173 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#236174 = ORIENTED_EDGE('',*,*,#236175,.T.); +#236175 = EDGE_CURVE('',#236168,#236176,#236178,.T.); +#236176 = VERTEX_POINT('',#236177); +#236177 = CARTESIAN_POINT('',(117.346306,-53.128073,1.585)); +#236178 = LINE('',#236179,#236180); +#236179 = CARTESIAN_POINT('',(117.291273,-53.068323,1.585)); +#236180 = VECTOR('',#236181,1.); +#236181 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#236182 = ORIENTED_EDGE('',*,*,#236183,.T.); +#236183 = EDGE_CURVE('',#236176,#236184,#236186,.T.); +#236184 = VERTEX_POINT('',#236185); +#236185 = CARTESIAN_POINT('',(117.393109,-53.2282,1.585)); +#236186 = LINE('',#236187,#236188); +#236187 = CARTESIAN_POINT('',(117.346306,-53.128073,1.585)); +#236188 = VECTOR('',#236189,1.); +#236189 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#236190 = ORIENTED_EDGE('',*,*,#236191,.T.); +#236191 = EDGE_CURVE('',#236184,#236192,#236194,.T.); +#236192 = VERTEX_POINT('',#236193); +#236193 = CARTESIAN_POINT('',(117.396025,-53.246585,1.585)); +#236194 = LINE('',#236195,#236196); +#236195 = CARTESIAN_POINT('',(117.393109,-53.2282,1.585)); +#236196 = VECTOR('',#236197,1.); +#236197 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#236198 = ORIENTED_EDGE('',*,*,#236199,.T.); +#236199 = EDGE_CURVE('',#236192,#236200,#236202,.T.); +#236200 = VERTEX_POINT('',#236201); +#236201 = CARTESIAN_POINT('',(117.722322,-53.018178,1.585)); +#236202 = LINE('',#236203,#236204); +#236203 = CARTESIAN_POINT('',(117.396025,-53.246585,1.585)); +#236204 = VECTOR('',#236205,1.); +#236205 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#236206 = ORIENTED_EDGE('',*,*,#236207,.T.); +#236207 = EDGE_CURVE('',#236200,#236208,#236210,.T.); +#236208 = VERTEX_POINT('',#236209); +#236209 = CARTESIAN_POINT('',(117.796872,-53.124678,1.585)); +#236210 = CIRCLE('',#236211,6.499990865384E-02); +#236211 = AXIS2_PLACEMENT_3D('',#236212,#236213,#236214); +#236212 = CARTESIAN_POINT('',(117.75959707222,-53.07142794944,1.585)); +#236213 = DIRECTION('',(0.,0.,-1.)); +#236214 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#236215 = ORIENTED_EDGE('',*,*,#236216,.T.); +#236216 = EDGE_CURVE('',#236208,#236217,#236219,.T.); +#236217 = VERTEX_POINT('',#236218); +#236218 = CARTESIAN_POINT('',(117.396025,-53.40527,1.585)); +#236219 = LINE('',#236220,#236221); +#236220 = CARTESIAN_POINT('',(117.796872,-53.124678,1.585)); +#236221 = VECTOR('',#236222,1.); +#236222 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#236223 = ORIENTED_EDGE('',*,*,#236224,.T.); +#236224 = EDGE_CURVE('',#236217,#236225,#236227,.T.); +#236225 = VERTEX_POINT('',#236226); +#236226 = CARTESIAN_POINT('',(117.396025,-53.520714,1.585)); +#236227 = LINE('',#236228,#236229); +#236228 = CARTESIAN_POINT('',(117.396025,-53.40527,1.585)); +#236229 = VECTOR('',#236230,1.); +#236230 = DIRECTION('',(0.,-1.,0.)); +#236231 = ORIENTED_EDGE('',*,*,#236232,.T.); +#236232 = EDGE_CURVE('',#236225,#236233,#236235,.T.); +#236233 = VERTEX_POINT('',#236234); +#236234 = CARTESIAN_POINT('',(117.759597,-53.520714,1.585)); +#236235 = LINE('',#236236,#236237); +#236236 = CARTESIAN_POINT('',(117.396025,-53.520714,1.585)); +#236237 = VECTOR('',#236238,1.); +#236238 = DIRECTION('',(1.,0.,0.)); +#236239 = ORIENTED_EDGE('',*,*,#236240,.T.); +#236240 = EDGE_CURVE('',#236233,#236241,#236243,.T.); +#236241 = VERTEX_POINT('',#236242); +#236242 = CARTESIAN_POINT('',(117.759597,-53.650714,1.585)); +#236243 = CIRCLE('',#236244,6.500000000091E-02); +#236244 = AXIS2_PLACEMENT_3D('',#236245,#236246,#236247); +#236245 = CARTESIAN_POINT('',(117.75959665513,-53.585714,1.585)); +#236246 = DIRECTION('',(0.,0.,-1.)); +#236247 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#236248 = ORIENTED_EDGE('',*,*,#236249,.T.); +#236249 = EDGE_CURVE('',#236241,#236250,#236252,.T.); +#236250 = VERTEX_POINT('',#236251); +#236251 = CARTESIAN_POINT('',(116.859597,-53.650714,1.585)); +#236252 = LINE('',#236253,#236254); +#236253 = CARTESIAN_POINT('',(117.759597,-53.650714,1.585)); +#236254 = VECTOR('',#236255,1.); +#236255 = DIRECTION('',(-1.,0.,0.)); +#236256 = ORIENTED_EDGE('',*,*,#236257,.T.); +#236257 = EDGE_CURVE('',#236250,#236258,#236260,.T.); +#236258 = VERTEX_POINT('',#236259); +#236259 = CARTESIAN_POINT('',(116.794597,-53.585714,1.585)); +#236260 = CIRCLE('',#236261,6.500103935389E-02); +#236261 = AXIS2_PLACEMENT_3D('',#236262,#236263,#236264); +#236262 = CARTESIAN_POINT('',(116.85959803934,-53.58571296065,1.585)); +#236263 = DIRECTION('',(0.,0.,-1.)); +#236264 = DIRECTION('',(-1.59896764922E-05,-0.999999999872,-0.)); +#236265 = ORIENTED_EDGE('',*,*,#236266,.T.); +#236266 = EDGE_CURVE('',#236258,#236267,#236269,.T.); +#236267 = VERTEX_POINT('',#236268); +#236268 = CARTESIAN_POINT('',(116.797512,-53.2282,1.585)); +#236269 = LINE('',#236270,#236271); +#236270 = CARTESIAN_POINT('',(116.794597,-53.585714,1.585)); +#236271 = VECTOR('',#236272,1.); +#236272 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#236273 = ORIENTED_EDGE('',*,*,#236274,.T.); +#236274 = EDGE_CURVE('',#236267,#236275,#236277,.T.); +#236275 = VERTEX_POINT('',#236276); +#236276 = CARTESIAN_POINT('',(116.850702,-53.119844,1.585)); +#236277 = LINE('',#236278,#236279); +#236278 = CARTESIAN_POINT('',(116.797512,-53.2282,1.585)); +#236279 = VECTOR('',#236280,1.); +#236280 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#236281 = ORIENTED_EDGE('',*,*,#236282,.T.); +#236282 = EDGE_CURVE('',#236275,#236157,#236283,.T.); +#236283 = LINE('',#236284,#236285); +#236284 = CARTESIAN_POINT('',(116.850702,-53.119844,1.585)); +#236285 = VECTOR('',#236286,1.); +#236286 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236287 = FACE_BOUND('',#236288,.F.); +#236288 = EDGE_LOOP('',(#236289,#236300,#236308,#236316,#236324,#236332, + #236340)); +#236289 = ORIENTED_EDGE('',*,*,#236290,.T.); +#236290 = EDGE_CURVE('',#236291,#236293,#236295,.T.); +#236291 = VERTEX_POINT('',#236292); +#236292 = CARTESIAN_POINT('',(117.206808,-53.167706,1.585)); +#236293 = VERTEX_POINT('',#236294); +#236294 = CARTESIAN_POINT('',(116.955875,-53.195644,1.585)); +#236295 = CIRCLE('',#236296,0.180979134862); +#236296 = AXIS2_PLACEMENT_3D('',#236297,#236298,#236299); +#236297 = CARTESIAN_POINT('',(117.09569076987,-53.31055700078,1.585)); +#236298 = DIRECTION('',(0.,0.,1.)); +#236299 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#236300 = ORIENTED_EDGE('',*,*,#236301,.T.); +#236301 = EDGE_CURVE('',#236293,#236302,#236304,.T.); +#236302 = VERTEX_POINT('',#236303); +#236303 = CARTESIAN_POINT('',(116.924597,-53.258201,1.585)); +#236304 = LINE('',#236305,#236306); +#236305 = CARTESIAN_POINT('',(116.955875,-53.195644,1.585)); +#236306 = VECTOR('',#236307,1.); +#236307 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#236308 = ORIENTED_EDGE('',*,*,#236309,.T.); +#236309 = EDGE_CURVE('',#236302,#236310,#236312,.T.); +#236310 = VERTEX_POINT('',#236311); +#236311 = CARTESIAN_POINT('',(116.924597,-53.520714,1.585)); +#236312 = LINE('',#236313,#236314); +#236313 = CARTESIAN_POINT('',(116.924597,-53.258201,1.585)); +#236314 = VECTOR('',#236315,1.); +#236315 = DIRECTION('',(0.,-1.,0.)); +#236316 = ORIENTED_EDGE('',*,*,#236317,.T.); +#236317 = EDGE_CURVE('',#236310,#236318,#236320,.T.); +#236318 = VERTEX_POINT('',#236319); +#236319 = CARTESIAN_POINT('',(117.266025,-53.520714,1.585)); +#236320 = LINE('',#236321,#236322); +#236321 = CARTESIAN_POINT('',(116.924597,-53.520714,1.585)); +#236322 = VECTOR('',#236323,1.); +#236323 = DIRECTION('',(1.,0.,0.)); +#236324 = ORIENTED_EDGE('',*,*,#236325,.T.); +#236325 = EDGE_CURVE('',#236318,#236326,#236328,.T.); +#236326 = VERTEX_POINT('',#236327); +#236327 = CARTESIAN_POINT('',(117.266025,-53.258201,1.585)); +#236328 = LINE('',#236329,#236330); +#236329 = CARTESIAN_POINT('',(117.266025,-53.520714,1.585)); +#236330 = VECTOR('',#236331,1.); +#236331 = DIRECTION('',(0.,1.,0.)); +#236332 = ORIENTED_EDGE('',*,*,#236333,.T.); +#236333 = EDGE_CURVE('',#236326,#236334,#236336,.T.); +#236334 = VERTEX_POINT('',#236335); +#236335 = CARTESIAN_POINT('',(117.234746,-53.195644,1.585)); +#236336 = LINE('',#236337,#236338); +#236337 = CARTESIAN_POINT('',(117.266025,-53.258201,1.585)); +#236338 = VECTOR('',#236339,1.); +#236339 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#236340 = ORIENTED_EDGE('',*,*,#236341,.T.); +#236341 = EDGE_CURVE('',#236334,#236291,#236342,.T.); +#236342 = LINE('',#236343,#236344); +#236343 = CARTESIAN_POINT('',(117.234746,-53.195644,1.585)); +#236344 = VECTOR('',#236345,1.); +#236345 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#236346 = PLANE('',#236347); +#236347 = AXIS2_PLACEMENT_3D('',#236348,#236349,#236350); +#236348 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236349 = DIRECTION('',(0.,0.,1.)); +#236350 = DIRECTION('',(1.,0.,-0.)); +#236351 = SHELL_BASED_SURFACE_MODEL('',(#236352)); +#236352 = OPEN_SHELL('',(#236353)); +#236353 = ADVANCED_FACE('',(#236354),#236398,.T.); +#236354 = FACE_BOUND('',#236355,.F.); +#236355 = EDGE_LOOP('',(#236356,#236367,#236375,#236384,#236392)); +#236356 = ORIENTED_EDGE('',*,*,#236357,.T.); +#236357 = EDGE_CURVE('',#236358,#236360,#236362,.T.); +#236358 = VERTEX_POINT('',#236359); +#236359 = CARTESIAN_POINT('',(127.556688,-52.86084,1.585)); +#236360 = VERTEX_POINT('',#236361); +#236361 = CARTESIAN_POINT('',(127.68174,-52.885714,1.585)); +#236362 = CIRCLE('',#236363,6.499988811648E-02); +#236363 = AXIS2_PLACEMENT_3D('',#236364,#236365,#236366); +#236364 = CARTESIAN_POINT('',(127.61674011188,-52.8857142701,1.585)); +#236365 = DIRECTION('',(0.,0.,-1.)); +#236366 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#236367 = ORIENTED_EDGE('',*,*,#236368,.T.); +#236368 = EDGE_CURVE('',#236360,#236369,#236371,.T.); +#236369 = VERTEX_POINT('',#236370); +#236370 = CARTESIAN_POINT('',(127.68174,-53.571428,1.585)); +#236371 = LINE('',#236372,#236373); +#236372 = CARTESIAN_POINT('',(127.68174,-52.885714,1.585)); +#236373 = VECTOR('',#236374,1.); +#236374 = DIRECTION('',(0.,-1.,0.)); +#236375 = ORIENTED_EDGE('',*,*,#236376,.T.); +#236376 = EDGE_CURVE('',#236369,#236377,#236379,.T.); +#236377 = VERTEX_POINT('',#236378); +#236378 = CARTESIAN_POINT('',(127.55174,-53.571428,1.585)); +#236379 = CIRCLE('',#236380,6.500000000092E-02); +#236380 = AXIS2_PLACEMENT_3D('',#236381,#236382,#236383); +#236381 = CARTESIAN_POINT('',(127.61674,-53.57142765513,1.585)); +#236382 = DIRECTION('',(-0.,0.,-1.)); +#236383 = DIRECTION('',(0.999999999986,-5.305658025668E-06,-0.)); +#236384 = ORIENTED_EDGE('',*,*,#236385,.T.); +#236385 = EDGE_CURVE('',#236377,#236386,#236388,.T.); +#236386 = VERTEX_POINT('',#236387); +#236387 = CARTESIAN_POINT('',(127.55174,-52.885714,1.585)); +#236388 = LINE('',#236389,#236390); +#236389 = CARTESIAN_POINT('',(127.55174,-53.571428,1.585)); +#236390 = VECTOR('',#236391,1.); +#236391 = DIRECTION('',(0.,1.,0.)); +#236392 = ORIENTED_EDGE('',*,*,#236393,.T.); +#236393 = EDGE_CURVE('',#236386,#236358,#236394,.T.); +#236394 = LINE('',#236395,#236396); +#236395 = CARTESIAN_POINT('',(127.55174,-52.885714,1.585)); +#236396 = VECTOR('',#236397,1.); +#236397 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#236398 = PLANE('',#236399); +#236399 = AXIS2_PLACEMENT_3D('',#236400,#236401,#236402); +#236400 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236401 = DIRECTION('',(0.,0.,1.)); +#236402 = DIRECTION('',(1.,0.,-0.)); +#236403 = SHELL_BASED_SURFACE_MODEL('',(#236404)); +#236404 = OPEN_SHELL('',(#236405)); +#236405 = ADVANCED_FACE('',(#236406,#236475),#236501,.T.); +#236406 = FACE_BOUND('',#236407,.F.); +#236407 = EDGE_LOOP('',(#236408,#236419,#236427,#236436,#236444,#236452, + #236460,#236469)); +#236408 = ORIENTED_EDGE('',*,*,#236409,.T.); +#236409 = EDGE_CURVE('',#236410,#236412,#236414,.T.); +#236410 = VERTEX_POINT('',#236411); +#236411 = CARTESIAN_POINT('',(147.319042,-53.283092,1.585)); +#236412 = VERTEX_POINT('',#236413); +#236413 = CARTESIAN_POINT('',(147.319042,-53.159764,1.585)); +#236414 = CIRCLE('',#236415,6.499975994821E-02); +#236415 = AXIS2_PLACEMENT_3D('',#236416,#236417,#236418); +#236416 = CARTESIAN_POINT('',(147.33959728879,-53.221428,1.585)); +#236417 = DIRECTION('',(0.,0.,-1.)); +#236418 = DIRECTION('',(-0.316236380079,-0.948680426653,-0.)); +#236419 = ORIENTED_EDGE('',*,*,#236420,.T.); +#236420 = EDGE_CURVE('',#236412,#236421,#236423,.T.); +#236421 = VERTEX_POINT('',#236422); +#236422 = CARTESIAN_POINT('',(148.219042,-52.859764,1.585)); +#236423 = LINE('',#236424,#236425); +#236424 = CARTESIAN_POINT('',(147.319042,-53.159764,1.585)); +#236425 = VECTOR('',#236426,1.); +#236426 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#236427 = ORIENTED_EDGE('',*,*,#236428,.T.); +#236428 = EDGE_CURVE('',#236421,#236429,#236431,.T.); +#236429 = VERTEX_POINT('',#236430); +#236430 = CARTESIAN_POINT('',(148.260152,-52.983093,1.585)); +#236431 = CIRCLE('',#236432,6.500014296397E-02); +#236432 = AXIS2_PLACEMENT_3D('',#236433,#236434,#236435); +#236433 = CARTESIAN_POINT('',(148.23959672008,-52.9214285933,1.585)); +#236434 = DIRECTION('',(0.,0.,-1.)); +#236435 = DIRECTION('',(-0.316225767373,0.948683964263,-0.)); +#236436 = ORIENTED_EDGE('',*,*,#236437,.T.); +#236437 = EDGE_CURVE('',#236429,#236438,#236440,.T.); +#236438 = VERTEX_POINT('',#236439); +#236439 = CARTESIAN_POINT('',(148.047454,-53.053992,1.585)); +#236440 = LINE('',#236441,#236442); +#236441 = CARTESIAN_POINT('',(148.260152,-52.983093,1.585)); +#236442 = VECTOR('',#236443,1.); +#236443 = DIRECTION('',(-0.948683744073,-0.316226427945,0.)); +#236444 = ORIENTED_EDGE('',*,*,#236445,.T.); +#236445 = EDGE_CURVE('',#236438,#236446,#236448,.T.); +#236446 = VERTEX_POINT('',#236447); +#236447 = CARTESIAN_POINT('',(148.047454,-53.388863,1.585)); +#236448 = LINE('',#236449,#236450); +#236449 = CARTESIAN_POINT('',(148.047454,-53.053992,1.585)); +#236450 = VECTOR('',#236451,1.); +#236451 = DIRECTION('',(0.,-1.,0.)); +#236452 = ORIENTED_EDGE('',*,*,#236453,.T.); +#236453 = EDGE_CURVE('',#236446,#236454,#236456,.T.); +#236454 = VERTEX_POINT('',#236455); +#236455 = CARTESIAN_POINT('',(148.260152,-53.459763,1.585)); +#236456 = LINE('',#236457,#236458); +#236457 = CARTESIAN_POINT('',(148.047454,-53.388863,1.585)); +#236458 = VECTOR('',#236459,1.); +#236459 = DIRECTION('',(0.948682406,-0.316230442155,0.)); +#236460 = ORIENTED_EDGE('',*,*,#236461,.T.); +#236461 = EDGE_CURVE('',#236454,#236462,#236464,.T.); +#236462 = VERTEX_POINT('',#236463); +#236463 = CARTESIAN_POINT('',(148.219042,-53.583092,1.585)); +#236464 = CIRCLE('',#236465,6.500014296695E-02); +#236465 = AXIS2_PLACEMENT_3D('',#236466,#236467,#236468); +#236466 = CARTESIAN_POINT('',(148.23959634729,-53.52142728242,1.585)); +#236467 = DIRECTION('',(0.,0.,-1.)); +#236468 = DIRECTION('',(0.316240115321,0.948679181526,0.)); +#236469 = ORIENTED_EDGE('',*,*,#236470,.T.); +#236470 = EDGE_CURVE('',#236462,#236410,#236471,.T.); +#236471 = LINE('',#236472,#236473); +#236472 = CARTESIAN_POINT('',(148.219042,-53.583092,1.585)); +#236473 = VECTOR('',#236474,1.); +#236474 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#236475 = FACE_BOUND('',#236476,.F.); +#236476 = EDGE_LOOP('',(#236477,#236487,#236495)); +#236477 = ORIENTED_EDGE('',*,*,#236478,.T.); +#236478 = EDGE_CURVE('',#236479,#236481,#236483,.T.); +#236479 = VERTEX_POINT('',#236480); +#236480 = CARTESIAN_POINT('',(147.545144,-53.221428,1.585)); +#236481 = VERTEX_POINT('',#236482); +#236482 = CARTESIAN_POINT('',(147.917454,-53.34553,1.585)); +#236483 = LINE('',#236484,#236485); +#236484 = CARTESIAN_POINT('',(147.545144,-53.221428,1.585)); +#236485 = VECTOR('',#236486,1.); +#236486 = DIRECTION('',(0.948684317287,-0.316224708291,0.)); +#236487 = ORIENTED_EDGE('',*,*,#236488,.T.); +#236488 = EDGE_CURVE('',#236481,#236489,#236491,.T.); +#236489 = VERTEX_POINT('',#236490); +#236490 = CARTESIAN_POINT('',(147.917454,-53.097325,1.585)); +#236491 = LINE('',#236492,#236493); +#236492 = CARTESIAN_POINT('',(147.917454,-53.34553,1.585)); +#236493 = VECTOR('',#236494,1.); +#236494 = DIRECTION('',(0.,1.,0.)); +#236495 = ORIENTED_EDGE('',*,*,#236496,.T.); +#236496 = EDGE_CURVE('',#236489,#236479,#236497,.T.); +#236497 = LINE('',#236498,#236499); +#236498 = CARTESIAN_POINT('',(147.917454,-53.097325,1.585)); +#236499 = VECTOR('',#236500,1.); +#236500 = DIRECTION('',(-0.94868355286,-0.316227001586,0.)); +#236501 = PLANE('',#236502); +#236502 = AXIS2_PLACEMENT_3D('',#236503,#236504,#236505); +#236503 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236504 = DIRECTION('',(0.,0.,1.)); +#236505 = DIRECTION('',(1.,0.,-0.)); +#236506 = SHELL_BASED_SURFACE_MODEL('',(#236507)); +#236507 = OPEN_SHELL('',(#236508)); +#236508 = ADVANCED_FACE('',(#236509),#236586,.T.); +#236509 = FACE_BOUND('',#236510,.F.); +#236510 = EDGE_LOOP('',(#236511,#236522,#236530,#236538,#236547,#236555, + #236564,#236572,#236580)); +#236511 = ORIENTED_EDGE('',*,*,#236512,.T.); +#236512 = EDGE_CURVE('',#236513,#236515,#236517,.T.); +#236513 = VERTEX_POINT('',#236514); +#236514 = CARTESIAN_POINT('',(186.607125,-52.415559,1.585)); +#236515 = VERTEX_POINT('',#236516); +#236516 = CARTESIAN_POINT('',(186.723793,-52.477919,1.585)); +#236517 = CIRCLE('',#236518,7.500000000003E-02); +#236518 = AXIS2_PLACEMENT_3D('',#236519,#236520,#236521); +#236519 = CARTESIAN_POINT('',(186.648793,-52.47791906555,1.585)); +#236520 = DIRECTION('',(0.,0.,-1.)); +#236521 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#236522 = ORIENTED_EDGE('',*,*,#236523,.T.); +#236523 = EDGE_CURVE('',#236515,#236524,#236526,.T.); +#236524 = VERTEX_POINT('',#236525); +#236525 = CARTESIAN_POINT('',(186.723793,-53.402919,1.585)); +#236526 = LINE('',#236527,#236528); +#236527 = CARTESIAN_POINT('',(186.723793,-52.477919,1.585)); +#236528 = VECTOR('',#236529,1.); +#236529 = DIRECTION('',(0.,-1.,0.)); +#236530 = ORIENTED_EDGE('',*,*,#236531,.T.); +#236531 = EDGE_CURVE('',#236524,#236532,#236534,.T.); +#236532 = VERTEX_POINT('',#236533); +#236533 = CARTESIAN_POINT('',(187.139615,-53.40436,1.585)); +#236534 = LINE('',#236535,#236536); +#236535 = CARTESIAN_POINT('',(186.723793,-53.402919,1.585)); +#236536 = VECTOR('',#236537,1.); +#236537 = DIRECTION('',(0.999993995468,-3.465404301528E-03,0.)); +#236538 = ORIENTED_EDGE('',*,*,#236539,.T.); +#236539 = EDGE_CURVE('',#236532,#236540,#236542,.T.); +#236540 = VERTEX_POINT('',#236541); +#236541 = CARTESIAN_POINT('',(187.124983,-53.552919,1.585)); +#236542 = CIRCLE('',#236543,7.500006711464E-02); +#236543 = AXIS2_PLACEMENT_3D('',#236544,#236545,#236546); +#236544 = CARTESIAN_POINT('',(187.12498306711,-53.47791893288,1.585)); +#236545 = DIRECTION('',(0.,0.,-1.)); +#236546 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#236547 = ORIENTED_EDGE('',*,*,#236548,.T.); +#236548 = EDGE_CURVE('',#236540,#236549,#236551,.T.); +#236549 = VERTEX_POINT('',#236550); +#236550 = CARTESIAN_POINT('',(186.634161,-53.551478,1.585)); +#236551 = LINE('',#236552,#236553); +#236552 = CARTESIAN_POINT('',(187.124983,-53.552919,1.585)); +#236553 = VECTOR('',#236554,1.); +#236554 = DIRECTION('',(-0.999995690299,2.935878566407E-03,0.)); +#236555 = ORIENTED_EDGE('',*,*,#236556,.T.); +#236556 = EDGE_CURVE('',#236549,#236557,#236559,.T.); +#236557 = VERTEX_POINT('',#236558); +#236558 = CARTESIAN_POINT('',(186.573793,-53.477919,1.585)); +#236559 = CIRCLE('',#236560,7.500074938986E-02); +#236560 = AXIS2_PLACEMENT_3D('',#236561,#236562,#236563); +#236561 = CARTESIAN_POINT('',(186.64879374938,-53.47791853389,1.585)); +#236562 = DIRECTION('',(0.,0.,-1.)); +#236563 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#236564 = ORIENTED_EDGE('',*,*,#236565,.T.); +#236565 = EDGE_CURVE('',#236557,#236566,#236568,.T.); +#236566 = VERTEX_POINT('',#236567); +#236567 = CARTESIAN_POINT('',(186.575234,-52.463287,1.585)); +#236568 = LINE('',#236569,#236570); +#236569 = CARTESIAN_POINT('',(186.573793,-53.477919,1.585)); +#236570 = VECTOR('',#236571,1.); +#236571 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#236572 = ORIENTED_EDGE('',*,*,#236573,.T.); +#236573 = EDGE_CURVE('',#236566,#236574,#236576,.T.); +#236574 = VERTEX_POINT('',#236575); +#236575 = CARTESIAN_POINT('',(186.586433,-52.436251,1.585)); +#236576 = LINE('',#236577,#236578); +#236577 = CARTESIAN_POINT('',(186.575234,-52.463287,1.585)); +#236578 = VECTOR('',#236579,1.); +#236579 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#236580 = ORIENTED_EDGE('',*,*,#236581,.T.); +#236581 = EDGE_CURVE('',#236574,#236513,#236582,.T.); +#236582 = LINE('',#236583,#236584); +#236583 = CARTESIAN_POINT('',(186.586433,-52.436251,1.585)); +#236584 = VECTOR('',#236585,1.); +#236585 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236586 = PLANE('',#236587); +#236587 = AXIS2_PLACEMENT_3D('',#236588,#236589,#236590); +#236588 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236589 = DIRECTION('',(0.,0.,1.)); +#236590 = DIRECTION('',(1.,0.,-0.)); +#236591 = SHELL_BASED_SURFACE_MODEL('',(#236592)); +#236592 = OPEN_SHELL('',(#236593)); +#236593 = ADVANCED_FACE('',(#236594),#236753,.T.); +#236594 = FACE_BOUND('',#236595,.F.); +#236595 = EDGE_LOOP('',(#236596,#236607,#236615,#236623,#236631,#236639, + #236647,#236655,#236664,#236672,#236681,#236689,#236697,#236705, + #236714,#236722,#236730,#236738,#236747)); +#236596 = ORIENTED_EDGE('',*,*,#236597,.T.); +#236597 = EDGE_CURVE('',#236598,#236600,#236602,.T.); +#236598 = VERTEX_POINT('',#236599); +#236599 = CARTESIAN_POINT('',(187.424776,-52.458456,1.585)); +#236600 = VERTEX_POINT('',#236601); +#236601 = CARTESIAN_POINT('',(187.934171,-52.467786,1.585)); +#236602 = CIRCLE('',#236603,0.450326844012); +#236603 = AXIS2_PLACEMENT_3D('',#236604,#236605,#236606); +#236604 = CARTESIAN_POINT('',(187.6726730301,-52.83440989199,1.585)); +#236605 = DIRECTION('',(0.,0.,-1.)); +#236606 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#236607 = ORIENTED_EDGE('',*,*,#236608,.T.); +#236608 = EDGE_CURVE('',#236600,#236609,#236611,.T.); +#236609 = VERTEX_POINT('',#236610); +#236610 = CARTESIAN_POINT('',(187.997624,-52.533316,1.585)); +#236611 = LINE('',#236612,#236613); +#236612 = CARTESIAN_POINT('',(187.934171,-52.467786,1.585)); +#236613 = VECTOR('',#236614,1.); +#236614 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#236615 = ORIENTED_EDGE('',*,*,#236616,.T.); +#236616 = EDGE_CURVE('',#236609,#236617,#236619,.T.); +#236617 = VERTEX_POINT('',#236618); +#236618 = CARTESIAN_POINT('',(188.055685,-52.653763,1.585)); +#236619 = LINE('',#236620,#236621); +#236620 = CARTESIAN_POINT('',(187.997624,-52.533316,1.585)); +#236621 = VECTOR('',#236622,1.); +#236622 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#236623 = ORIENTED_EDGE('',*,*,#236624,.T.); +#236624 = EDGE_CURVE('',#236617,#236625,#236627,.T.); +#236625 = VERTEX_POINT('',#236626); +#236626 = CARTESIAN_POINT('',(188.054926,-52.780095,1.585)); +#236627 = LINE('',#236628,#236629); +#236628 = CARTESIAN_POINT('',(188.055685,-52.653763,1.585)); +#236629 = VECTOR('',#236630,1.); +#236630 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#236631 = ORIENTED_EDGE('',*,*,#236632,.T.); +#236632 = EDGE_CURVE('',#236625,#236633,#236635,.T.); +#236633 = VERTEX_POINT('',#236634); +#236634 = CARTESIAN_POINT('',(187.996868,-52.948158,1.585)); +#236635 = LINE('',#236636,#236637); +#236636 = CARTESIAN_POINT('',(188.054926,-52.780095,1.585)); +#236637 = VECTOR('',#236638,1.); +#236638 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#236639 = ORIENTED_EDGE('',*,*,#236640,.T.); +#236640 = EDGE_CURVE('',#236633,#236641,#236643,.T.); +#236641 = VERTEX_POINT('',#236642); +#236642 = CARTESIAN_POINT('',(187.544145,-53.402919,1.585)); +#236643 = LINE('',#236644,#236645); +#236644 = CARTESIAN_POINT('',(187.996868,-52.948158,1.585)); +#236645 = VECTOR('',#236646,1.); +#236646 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#236647 = ORIENTED_EDGE('',*,*,#236648,.T.); +#236648 = EDGE_CURVE('',#236641,#236649,#236651,.T.); +#236649 = VERTEX_POINT('',#236650); +#236650 = CARTESIAN_POINT('',(187.996758,-53.40436,1.585)); +#236651 = LINE('',#236652,#236653); +#236652 = CARTESIAN_POINT('',(187.544145,-53.402919,1.585)); +#236653 = VECTOR('',#236654,1.); +#236654 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#236655 = ORIENTED_EDGE('',*,*,#236656,.T.); +#236656 = EDGE_CURVE('',#236649,#236657,#236659,.T.); +#236657 = VERTEX_POINT('',#236658); +#236658 = CARTESIAN_POINT('',(187.982126,-53.552919,1.585)); +#236659 = CIRCLE('',#236660,7.500006711464E-02); +#236660 = AXIS2_PLACEMENT_3D('',#236661,#236662,#236663); +#236661 = CARTESIAN_POINT('',(187.98212606711,-53.47791893288,1.585)); +#236662 = DIRECTION('',(0.,0.,-1.)); +#236663 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#236664 = ORIENTED_EDGE('',*,*,#236665,.T.); +#236665 = EDGE_CURVE('',#236657,#236666,#236668,.T.); +#236666 = VERTEX_POINT('',#236667); +#236667 = CARTESIAN_POINT('',(187.348447,-53.551478,1.585)); +#236668 = LINE('',#236669,#236670); +#236669 = CARTESIAN_POINT('',(187.982126,-53.552919,1.585)); +#236670 = VECTOR('',#236671,1.); +#236671 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#236672 = ORIENTED_EDGE('',*,*,#236673,.T.); +#236673 = EDGE_CURVE('',#236666,#236674,#236676,.T.); +#236674 = VERTEX_POINT('',#236675); +#236675 = CARTESIAN_POINT('',(187.310046,-53.424886,1.585)); +#236676 = CIRCLE('',#236677,7.500021013109E-02); +#236677 = AXIS2_PLACEMENT_3D('',#236678,#236679,#236680); +#236678 = CARTESIAN_POINT('',(187.3630793167,-53.47791899764,1.585)); +#236679 = DIRECTION('',(0.,0.,-1.)); +#236680 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#236681 = ORIENTED_EDGE('',*,*,#236682,.T.); +#236682 = EDGE_CURVE('',#236674,#236683,#236685,.T.); +#236683 = VERTEX_POINT('',#236684); +#236684 = CARTESIAN_POINT('',(187.868954,-52.865976,1.585)); +#236685 = LINE('',#236686,#236687); +#236686 = CARTESIAN_POINT('',(187.310046,-53.424886,1.585)); +#236687 = VECTOR('',#236688,1.); +#236688 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#236689 = ORIENTED_EDGE('',*,*,#236690,.T.); +#236690 = EDGE_CURVE('',#236683,#236691,#236693,.T.); +#236691 = VERTEX_POINT('',#236692); +#236692 = CARTESIAN_POINT('',(187.907126,-52.751463,1.585)); +#236693 = LINE('',#236694,#236695); +#236694 = CARTESIAN_POINT('',(187.868954,-52.865976,1.585)); +#236695 = VECTOR('',#236696,1.); +#236696 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#236697 = ORIENTED_EDGE('',*,*,#236698,.T.); +#236698 = EDGE_CURVE('',#236691,#236699,#236701,.T.); +#236699 = VERTEX_POINT('',#236700); +#236700 = CARTESIAN_POINT('',(187.907126,-52.6861,1.585)); +#236701 = LINE('',#236702,#236703); +#236702 = CARTESIAN_POINT('',(187.907126,-52.751463,1.585)); +#236703 = VECTOR('',#236704,1.); +#236704 = DIRECTION('',(0.,1.,0.)); +#236705 = ORIENTED_EDGE('',*,*,#236706,.T.); +#236706 = EDGE_CURVE('',#236699,#236707,#236709,.T.); +#236707 = VERTEX_POINT('',#236708); +#236708 = CARTESIAN_POINT('',(187.773945,-52.552919,1.585)); +#236709 = CIRCLE('',#236710,0.18686440374); +#236710 = AXIS2_PLACEMENT_3D('',#236711,#236712,#236713); +#236711 = CARTESIAN_POINT('',(187.726409,-52.733636,1.585)); +#236712 = DIRECTION('',(0.,0.,1.)); +#236713 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#236714 = ORIENTED_EDGE('',*,*,#236715,.T.); +#236715 = EDGE_CURVE('',#236707,#236716,#236718,.T.); +#236716 = VERTEX_POINT('',#236717); +#236717 = CARTESIAN_POINT('',(187.57126,-52.552919,1.585)); +#236718 = LINE('',#236719,#236720); +#236719 = CARTESIAN_POINT('',(187.773945,-52.552919,1.585)); +#236720 = VECTOR('',#236721,1.); +#236721 = DIRECTION('',(-1.,0.,0.)); +#236722 = ORIENTED_EDGE('',*,*,#236723,.T.); +#236723 = EDGE_CURVE('',#236716,#236724,#236726,.T.); +#236724 = VERTEX_POINT('',#236725); +#236725 = CARTESIAN_POINT('',(187.502744,-52.587177,1.585)); +#236726 = LINE('',#236727,#236728); +#236727 = CARTESIAN_POINT('',(187.57126,-52.552919,1.585)); +#236728 = VECTOR('',#236729,1.); +#236729 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#236730 = ORIENTED_EDGE('',*,*,#236731,.T.); +#236731 = EDGE_CURVE('',#236724,#236732,#236734,.T.); +#236732 = VERTEX_POINT('',#236733); +#236733 = CARTESIAN_POINT('',(187.452366,-52.635517,1.585)); +#236734 = LINE('',#236735,#236736); +#236735 = CARTESIAN_POINT('',(187.502744,-52.587177,1.585)); +#236736 = VECTOR('',#236737,1.); +#236737 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#236738 = ORIENTED_EDGE('',*,*,#236739,.T.); +#236739 = EDGE_CURVE('',#236732,#236740,#236742,.T.); +#236740 = VERTEX_POINT('',#236741); +#236741 = CARTESIAN_POINT('',(187.357665,-52.520124,1.585)); +#236742 = CIRCLE('',#236743,7.499996838528E-02); +#236743 = AXIS2_PLACEMENT_3D('',#236744,#236745,#236746); +#236744 = CARTESIAN_POINT('',(187.410698,-52.57315697246,1.585)); +#236745 = DIRECTION('',(0.,0.,-1.)); +#236746 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#236747 = ORIENTED_EDGE('',*,*,#236748,.T.); +#236748 = EDGE_CURVE('',#236740,#236598,#236749,.T.); +#236749 = LINE('',#236750,#236751); +#236750 = CARTESIAN_POINT('',(187.357665,-52.520124,1.585)); +#236751 = VECTOR('',#236752,1.); +#236752 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#236753 = PLANE('',#236754); +#236754 = AXIS2_PLACEMENT_3D('',#236755,#236756,#236757); +#236755 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236756 = DIRECTION('',(0.,0.,1.)); +#236757 = DIRECTION('',(1.,0.,-0.)); +#236758 = SHELL_BASED_SURFACE_MODEL('',(#236759)); +#236759 = OPEN_SHELL('',(#236760)); +#236760 = ADVANCED_FACE('',(#236761),#236847,.T.); +#236761 = FACE_BOUND('',#236762,.F.); +#236762 = EDGE_LOOP('',(#236763,#236774,#236782,#236791,#236799,#236807, + #236816,#236824,#236833,#236841)); +#236763 = ORIENTED_EDGE('',*,*,#236764,.T.); +#236764 = EDGE_CURVE('',#236765,#236767,#236769,.T.); +#236765 = VERTEX_POINT('',#236766); +#236766 = CARTESIAN_POINT('',(132.099597,-52.643571,1.585)); +#236767 = VERTEX_POINT('',#236768); +#236768 = CARTESIAN_POINT('',(132.099597,-52.513571,1.585)); +#236769 = CIRCLE('',#236770,6.500000000092E-02); +#236770 = AXIS2_PLACEMENT_3D('',#236771,#236772,#236773); +#236771 = CARTESIAN_POINT('',(132.09959734486,-52.578571,1.585)); +#236772 = DIRECTION('',(0.,0.,-1.)); +#236773 = DIRECTION('',(-5.305658462926E-06,-0.999999999986,-0.)); +#236774 = ORIENTED_EDGE('',*,*,#236775,.T.); +#236775 = EDGE_CURVE('',#236767,#236776,#236778,.T.); +#236776 = VERTEX_POINT('',#236777); +#236777 = CARTESIAN_POINT('',(132.999597,-52.513571,1.585)); +#236778 = LINE('',#236779,#236780); +#236779 = CARTESIAN_POINT('',(132.099597,-52.513571,1.585)); +#236780 = VECTOR('',#236781,1.); +#236781 = DIRECTION('',(1.,0.,0.)); +#236782 = ORIENTED_EDGE('',*,*,#236783,.T.); +#236783 = EDGE_CURVE('',#236776,#236784,#236786,.T.); +#236784 = VERTEX_POINT('',#236785); +#236785 = CARTESIAN_POINT('',(133.031846,-52.635007,1.585)); +#236786 = CIRCLE('',#236787,6.50002119414E-02); +#236787 = AXIS2_PLACEMENT_3D('',#236788,#236789,#236790); +#236788 = CARTESIAN_POINT('',(132.99959651351,-52.57857121194,1.585)); +#236789 = DIRECTION('',(0.,0.,-1.)); +#236790 = DIRECTION('',(7.484331678206E-06,0.999999999972,0.)); +#236791 = ORIENTED_EDGE('',*,*,#236792,.T.); +#236792 = EDGE_CURVE('',#236784,#236793,#236795,.T.); +#236793 = VERTEX_POINT('',#236794); +#236794 = CARTESIAN_POINT('',(132.344359,-53.027857,1.585)); +#236795 = LINE('',#236796,#236797); +#236796 = CARTESIAN_POINT('',(133.031846,-52.635007,1.585)); +#236797 = VECTOR('',#236798,1.); +#236798 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#236799 = ORIENTED_EDGE('',*,*,#236800,.T.); +#236800 = EDGE_CURVE('',#236793,#236801,#236803,.T.); +#236801 = VERTEX_POINT('',#236802); +#236802 = CARTESIAN_POINT('',(132.999597,-53.027857,1.585)); +#236803 = LINE('',#236804,#236805); +#236804 = CARTESIAN_POINT('',(132.344359,-53.027857,1.585)); +#236805 = VECTOR('',#236806,1.); +#236806 = DIRECTION('',(1.,0.,0.)); +#236807 = ORIENTED_EDGE('',*,*,#236808,.T.); +#236808 = EDGE_CURVE('',#236801,#236809,#236811,.T.); +#236809 = VERTEX_POINT('',#236810); +#236810 = CARTESIAN_POINT('',(132.999597,-53.157857,1.585)); +#236811 = CIRCLE('',#236812,6.500000000091E-02); +#236812 = AXIS2_PLACEMENT_3D('',#236813,#236814,#236815); +#236813 = CARTESIAN_POINT('',(132.99959665513,-53.092857,1.585)); +#236814 = DIRECTION('',(0.,0.,-1.)); +#236815 = DIRECTION('',(5.305657588411E-06,0.999999999986,0.)); +#236816 = ORIENTED_EDGE('',*,*,#236817,.T.); +#236817 = EDGE_CURVE('',#236809,#236818,#236820,.T.); +#236818 = VERTEX_POINT('',#236819); +#236819 = CARTESIAN_POINT('',(132.099597,-53.157857,1.585)); +#236820 = LINE('',#236821,#236822); +#236821 = CARTESIAN_POINT('',(132.999597,-53.157857,1.585)); +#236822 = VECTOR('',#236823,1.); +#236823 = DIRECTION('',(-1.,0.,0.)); +#236824 = ORIENTED_EDGE('',*,*,#236825,.T.); +#236825 = EDGE_CURVE('',#236818,#236826,#236828,.T.); +#236826 = VERTEX_POINT('',#236827); +#236827 = CARTESIAN_POINT('',(132.067348,-53.036421,1.585)); +#236828 = CIRCLE('',#236829,6.500021194141E-02); +#236829 = AXIS2_PLACEMENT_3D('',#236830,#236831,#236832); +#236830 = CARTESIAN_POINT('',(132.09959748648,-53.09285678806,1.585)); +#236831 = DIRECTION('',(0.,0.,-1.)); +#236832 = DIRECTION('',(-7.484332552719E-06,-0.999999999972,-0.)); +#236833 = ORIENTED_EDGE('',*,*,#236834,.T.); +#236834 = EDGE_CURVE('',#236826,#236835,#236837,.T.); +#236835 = VERTEX_POINT('',#236836); +#236836 = CARTESIAN_POINT('',(132.754835,-52.643571,1.585)); +#236837 = LINE('',#236838,#236839); +#236838 = CARTESIAN_POINT('',(132.067348,-53.036421,1.585)); +#236839 = VECTOR('',#236840,1.); +#236840 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#236841 = ORIENTED_EDGE('',*,*,#236842,.T.); +#236842 = EDGE_CURVE('',#236835,#236765,#236843,.T.); +#236843 = LINE('',#236844,#236845); +#236844 = CARTESIAN_POINT('',(132.754835,-52.643571,1.585)); +#236845 = VECTOR('',#236846,1.); +#236846 = DIRECTION('',(-1.,0.,0.)); +#236847 = PLANE('',#236848); +#236848 = AXIS2_PLACEMENT_3D('',#236849,#236850,#236851); +#236849 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236850 = DIRECTION('',(0.,0.,1.)); +#236851 = DIRECTION('',(1.,0.,-0.)); +#236852 = SHELL_BASED_SURFACE_MODEL('',(#236853)); +#236853 = OPEN_SHELL('',(#236854)); +#236854 = ADVANCED_FACE('',(#236855),#236982,.T.); +#236855 = FACE_BOUND('',#236856,.F.); +#236856 = EDGE_LOOP('',(#236857,#236868,#236876,#236884,#236892,#236901, + #236909,#236917,#236925,#236934,#236942,#236951,#236959,#236968, + #236976)); +#236857 = ORIENTED_EDGE('',*,*,#236858,.T.); +#236858 = EDGE_CURVE('',#236859,#236861,#236863,.T.); +#236859 = VERTEX_POINT('',#236860); +#236860 = CARTESIAN_POINT('',(139.649545,-52.617982,1.585)); +#236861 = VERTEX_POINT('',#236862); +#236862 = CARTESIAN_POINT('',(139.774597,-52.642856,1.585)); +#236863 = CIRCLE('',#236864,6.499988811649E-02); +#236864 = AXIS2_PLACEMENT_3D('',#236865,#236866,#236867); +#236865 = CARTESIAN_POINT('',(139.70959711188,-52.6428562701,1.585)); +#236866 = DIRECTION('',(0.,0.,-1.)); +#236867 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#236868 = ORIENTED_EDGE('',*,*,#236869,.T.); +#236869 = EDGE_CURVE('',#236861,#236870,#236872,.T.); +#236870 = VERTEX_POINT('',#236871); +#236871 = CARTESIAN_POINT('',(139.774597,-53.006428,1.585)); +#236872 = LINE('',#236873,#236874); +#236873 = CARTESIAN_POINT('',(139.774597,-52.642856,1.585)); +#236874 = VECTOR('',#236875,1.); +#236875 = DIRECTION('',(0.,-1.,0.)); +#236876 = ORIENTED_EDGE('',*,*,#236877,.T.); +#236877 = EDGE_CURVE('',#236870,#236878,#236880,.T.); +#236878 = VERTEX_POINT('',#236879); +#236879 = CARTESIAN_POINT('',(140.073168,-53.006428,1.585)); +#236880 = LINE('',#236881,#236882); +#236881 = CARTESIAN_POINT('',(139.774597,-53.006428,1.585)); +#236882 = VECTOR('',#236883,1.); +#236883 = DIRECTION('',(1.,0.,0.)); +#236884 = ORIENTED_EDGE('',*,*,#236885,.T.); +#236885 = EDGE_CURVE('',#236878,#236886,#236888,.T.); +#236886 = VERTEX_POINT('',#236887); +#236887 = CARTESIAN_POINT('',(140.073168,-52.771428,1.585)); +#236888 = LINE('',#236889,#236890); +#236889 = CARTESIAN_POINT('',(140.073168,-53.006428,1.585)); +#236890 = VECTOR('',#236891,1.); +#236891 = DIRECTION('',(0.,1.,0.)); +#236892 = ORIENTED_EDGE('',*,*,#236893,.T.); +#236893 = EDGE_CURVE('',#236886,#236894,#236896,.T.); +#236894 = VERTEX_POINT('',#236895); +#236895 = CARTESIAN_POINT('',(140.203168,-52.771428,1.585)); +#236896 = CIRCLE('',#236897,6.500000000091E-02); +#236897 = AXIS2_PLACEMENT_3D('',#236898,#236899,#236900); +#236898 = CARTESIAN_POINT('',(140.138168,-52.77142834486,1.585)); +#236899 = DIRECTION('',(0.,0.,-1.)); +#236900 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#236901 = ORIENTED_EDGE('',*,*,#236902,.T.); +#236902 = EDGE_CURVE('',#236894,#236903,#236905,.T.); +#236903 = VERTEX_POINT('',#236904); +#236904 = CARTESIAN_POINT('',(140.203168,-53.006428,1.585)); +#236905 = LINE('',#236906,#236907); +#236906 = CARTESIAN_POINT('',(140.203168,-52.771428,1.585)); +#236907 = VECTOR('',#236908,1.); +#236908 = DIRECTION('',(0.,-1.,0.)); +#236909 = ORIENTED_EDGE('',*,*,#236910,.T.); +#236910 = EDGE_CURVE('',#236903,#236911,#236913,.T.); +#236911 = VERTEX_POINT('',#236912); +#236912 = CARTESIAN_POINT('',(140.544597,-53.006428,1.585)); +#236913 = LINE('',#236914,#236915); +#236914 = CARTESIAN_POINT('',(140.203168,-53.006428,1.585)); +#236915 = VECTOR('',#236916,1.); +#236916 = DIRECTION('',(1.,0.,0.)); +#236917 = ORIENTED_EDGE('',*,*,#236918,.T.); +#236918 = EDGE_CURVE('',#236911,#236919,#236921,.T.); +#236919 = VERTEX_POINT('',#236920); +#236920 = CARTESIAN_POINT('',(140.544597,-52.642856,1.585)); +#236921 = LINE('',#236922,#236923); +#236922 = CARTESIAN_POINT('',(140.544597,-53.006428,1.585)); +#236923 = VECTOR('',#236924,1.); +#236924 = DIRECTION('',(0.,1.,0.)); +#236925 = ORIENTED_EDGE('',*,*,#236926,.T.); +#236926 = EDGE_CURVE('',#236919,#236927,#236929,.T.); +#236927 = VERTEX_POINT('',#236928); +#236928 = CARTESIAN_POINT('',(140.674597,-52.642856,1.585)); +#236929 = CIRCLE('',#236930,6.500000000091E-02); +#236930 = AXIS2_PLACEMENT_3D('',#236931,#236932,#236933); +#236931 = CARTESIAN_POINT('',(140.609597,-52.64285634486,1.585)); +#236932 = DIRECTION('',(0.,0.,-1.)); +#236933 = DIRECTION('',(-0.999999999986,5.305658134983E-06,0.)); +#236934 = ORIENTED_EDGE('',*,*,#236935,.T.); +#236935 = EDGE_CURVE('',#236927,#236936,#236938,.T.); +#236936 = VERTEX_POINT('',#236937); +#236937 = CARTESIAN_POINT('',(140.674597,-53.071428,1.585)); +#236938 = LINE('',#236939,#236940); +#236939 = CARTESIAN_POINT('',(140.674597,-52.642856,1.585)); +#236940 = VECTOR('',#236941,1.); +#236941 = DIRECTION('',(0.,-1.,0.)); +#236942 = ORIENTED_EDGE('',*,*,#236943,.T.); +#236943 = EDGE_CURVE('',#236936,#236944,#236946,.T.); +#236944 = VERTEX_POINT('',#236945); +#236945 = CARTESIAN_POINT('',(140.609597,-53.136428,1.585)); +#236946 = CIRCLE('',#236947,6.500103935393E-02); +#236947 = AXIS2_PLACEMENT_3D('',#236948,#236949,#236950); +#236948 = CARTESIAN_POINT('',(140.60959596065,-53.07142696065,1.585)); +#236949 = DIRECTION('',(0.,0.,-1.)); +#236950 = DIRECTION('',(0.999999999872,-1.598967682012E-05,0.)); +#236951 = ORIENTED_EDGE('',*,*,#236952,.T.); +#236952 = EDGE_CURVE('',#236944,#236953,#236955,.T.); +#236953 = VERTEX_POINT('',#236954); +#236954 = CARTESIAN_POINT('',(139.709597,-53.136428,1.585)); +#236955 = LINE('',#236956,#236957); +#236956 = CARTESIAN_POINT('',(140.609597,-53.136428,1.585)); +#236957 = VECTOR('',#236958,1.); +#236958 = DIRECTION('',(-1.,0.,0.)); +#236959 = ORIENTED_EDGE('',*,*,#236960,.T.); +#236960 = EDGE_CURVE('',#236953,#236961,#236963,.T.); +#236961 = VERTEX_POINT('',#236962); +#236962 = CARTESIAN_POINT('',(139.644597,-53.071428,1.585)); +#236963 = CIRCLE('',#236964,6.500103935387E-02); +#236964 = AXIS2_PLACEMENT_3D('',#236965,#236966,#236967); +#236965 = CARTESIAN_POINT('',(139.70959803934,-53.07142696065,1.585)); +#236966 = DIRECTION('',(0.,0.,-1.)); +#236967 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#236968 = ORIENTED_EDGE('',*,*,#236969,.T.); +#236969 = EDGE_CURVE('',#236961,#236970,#236972,.T.); +#236970 = VERTEX_POINT('',#236971); +#236971 = CARTESIAN_POINT('',(139.644597,-52.642856,1.585)); +#236972 = LINE('',#236973,#236974); +#236973 = CARTESIAN_POINT('',(139.644597,-53.071428,1.585)); +#236974 = VECTOR('',#236975,1.); +#236975 = DIRECTION('',(0.,1.,0.)); +#236976 = ORIENTED_EDGE('',*,*,#236977,.T.); +#236977 = EDGE_CURVE('',#236970,#236859,#236978,.T.); +#236978 = LINE('',#236979,#236980); +#236979 = CARTESIAN_POINT('',(139.644597,-52.642856,1.585)); +#236980 = VECTOR('',#236981,1.); +#236981 = DIRECTION('',(0.19509994748,0.98078336573,0.)); +#236982 = PLANE('',#236983); +#236983 = AXIS2_PLACEMENT_3D('',#236984,#236985,#236986); +#236984 = CARTESIAN_POINT('',(0.,0.,1.585)); +#236985 = DIRECTION('',(0.,0.,1.)); +#236986 = DIRECTION('',(1.,0.,-0.)); +#236987 = SHELL_BASED_SURFACE_MODEL('',(#236988)); +#236988 = OPEN_SHELL('',(#236989)); +#236989 = ADVANCED_FACE('',(#236990),#237191,.T.); +#236990 = FACE_BOUND('',#236991,.F.); +#236991 = EDGE_LOOP('',(#236992,#237003,#237011,#237020,#237028,#237036, + #237045,#237053,#237061,#237070,#237078,#237086,#237094,#237102, + #237110,#237118,#237126,#237135,#237143,#237152,#237160,#237168, + #237176,#237185)); +#236992 = ORIENTED_EDGE('',*,*,#236993,.T.); +#236993 = EDGE_CURVE('',#236994,#236996,#236998,.T.); +#236994 = VERTEX_POINT('',#236995); +#236995 = CARTESIAN_POINT('',(177.07388,-52.096493,1.585)); +#236996 = VERTEX_POINT('',#236997); +#236997 = CARTESIAN_POINT('',(177.768137,-52.053596,1.585)); +#236998 = CIRCLE('',#236999,0.762529751519); +#236999 = AXIS2_PLACEMENT_3D('',#237000,#237001,#237002); +#237000 = CARTESIAN_POINT('',(177.46285806099,-52.75234945534,1.585)); +#237001 = DIRECTION('',(0.,0.,-1.)); +#237002 = DIRECTION('',(-0.51011525809,0.860106053614,0.)); +#237003 = ORIENTED_EDGE('',*,*,#237004,.T.); +#237004 = EDGE_CURVE('',#236996,#237005,#237007,.T.); +#237005 = VERTEX_POINT('',#237006); +#237006 = CARTESIAN_POINT('',(177.788829,-52.074288,1.585)); +#237007 = LINE('',#237008,#237009); +#237008 = CARTESIAN_POINT('',(177.768137,-52.053596,1.585)); +#237009 = VECTOR('',#237010,1.); +#237010 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#237011 = ORIENTED_EDGE('',*,*,#237012,.T.); +#237012 = EDGE_CURVE('',#237005,#237013,#237015,.T.); +#237013 = VERTEX_POINT('',#237014); +#237014 = CARTESIAN_POINT('',(177.726469,-52.190956,1.585)); +#237015 = CIRCLE('',#237016,7.49997958033E-02); +#237016 = AXIS2_PLACEMENT_3D('',#237017,#237018,#237019); +#237017 = CARTESIAN_POINT('',(177.72646931647,-52.11595620419,1.585)); +#237018 = DIRECTION('',(0.,0.,-1.)); +#237019 = DIRECTION('',(0.831464710782,0.555577568593,0.)); +#237020 = ORIENTED_EDGE('',*,*,#237021,.T.); +#237021 = EDGE_CURVE('',#237013,#237022,#237024,.T.); +#237022 = VERTEX_POINT('',#237023); +#237023 = CARTESIAN_POINT('',(177.220364,-52.190956,1.585)); +#237024 = LINE('',#237025,#237026); +#237025 = CARTESIAN_POINT('',(177.726469,-52.190956,1.585)); +#237026 = VECTOR('',#237027,1.); +#237027 = DIRECTION('',(-1.,0.,0.)); +#237028 = ORIENTED_EDGE('',*,*,#237029,.T.); +#237029 = EDGE_CURVE('',#237022,#237030,#237032,.T.); +#237030 = VERTEX_POINT('',#237031); +#237031 = CARTESIAN_POINT('',(177.163322,-52.219476,1.585)); +#237032 = LINE('',#237033,#237034); +#237033 = CARTESIAN_POINT('',(177.220364,-52.190956,1.585)); +#237034 = VECTOR('',#237035,1.); +#237035 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#237036 = ORIENTED_EDGE('',*,*,#237037,.T.); +#237037 = EDGE_CURVE('',#237030,#237038,#237040,.T.); +#237038 = VERTEX_POINT('',#237039); +#237039 = CARTESIAN_POINT('',(177.163322,-52.441007,1.585)); +#237040 = CIRCLE('',#237041,0.186653372204); +#237041 = AXIS2_PLACEMENT_3D('',#237042,#237043,#237044); +#237042 = CARTESIAN_POINT('',(177.31355676749,-52.3302415,1.585)); +#237043 = DIRECTION('',(0.,0.,1.)); +#237044 = DIRECTION('',(-0.804886435872,0.593428871347,0.)); +#237045 = ORIENTED_EDGE('',*,*,#237046,.T.); +#237046 = EDGE_CURVE('',#237038,#237047,#237049,.T.); +#237047 = VERTEX_POINT('',#237048); +#237048 = CARTESIAN_POINT('',(177.220364,-52.469528,1.585)); +#237049 = LINE('',#237050,#237051); +#237050 = CARTESIAN_POINT('',(177.163322,-52.441007,1.585)); +#237051 = VECTOR('',#237052,1.); +#237052 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#237053 = ORIENTED_EDGE('',*,*,#237054,.T.); +#237054 = EDGE_CURVE('',#237047,#237055,#237057,.T.); +#237055 = VERTEX_POINT('',#237056); +#237056 = CARTESIAN_POINT('',(177.741101,-52.470969,1.585)); +#237057 = LINE('',#237058,#237059); +#237058 = CARTESIAN_POINT('',(177.220364,-52.469528,1.585)); +#237059 = VECTOR('',#237060,1.); +#237060 = DIRECTION('',(0.999996171236,-2.767221232121E-03,0.)); +#237061 = ORIENTED_EDGE('',*,*,#237062,.T.); +#237062 = EDGE_CURVE('',#237055,#237063,#237065,.T.); +#237063 = VERTEX_POINT('',#237064); +#237064 = CARTESIAN_POINT('',(177.726469,-52.619528,1.585)); +#237065 = CIRCLE('',#237066,7.500006711464E-02); +#237066 = AXIS2_PLACEMENT_3D('',#237067,#237068,#237069); +#237067 = CARTESIAN_POINT('',(177.72646906711,-52.54452793288,1.585)); +#237068 = DIRECTION('',(0.,0.,-1.)); +#237069 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#237070 = ORIENTED_EDGE('',*,*,#237071,.T.); +#237071 = EDGE_CURVE('',#237063,#237072,#237074,.T.); +#237072 = VERTEX_POINT('',#237073); +#237073 = CARTESIAN_POINT('',(177.220364,-52.619528,1.585)); +#237074 = LINE('',#237075,#237076); +#237075 = CARTESIAN_POINT('',(177.726469,-52.619528,1.585)); +#237076 = VECTOR('',#237077,1.); +#237077 = DIRECTION('',(-1.,0.,0.)); +#237078 = ORIENTED_EDGE('',*,*,#237079,.T.); +#237079 = EDGE_CURVE('',#237072,#237080,#237082,.T.); +#237080 = VERTEX_POINT('',#237081); +#237081 = CARTESIAN_POINT('',(177.163322,-52.648048,1.585)); +#237082 = LINE('',#237083,#237084); +#237083 = CARTESIAN_POINT('',(177.220364,-52.619528,1.585)); +#237084 = VECTOR('',#237085,1.); +#237085 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#237086 = ORIENTED_EDGE('',*,*,#237087,.T.); +#237087 = EDGE_CURVE('',#237080,#237088,#237090,.T.); +#237088 = VERTEX_POINT('',#237089); +#237089 = CARTESIAN_POINT('',(177.134802,-52.70509,1.585)); +#237090 = LINE('',#237091,#237092); +#237091 = CARTESIAN_POINT('',(177.163322,-52.648048,1.585)); +#237092 = VECTOR('',#237093,1.); +#237093 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#237094 = ORIENTED_EDGE('',*,*,#237095,.T.); +#237095 = EDGE_CURVE('',#237088,#237096,#237098,.T.); +#237096 = VERTEX_POINT('',#237097); +#237097 = CARTESIAN_POINT('',(177.134802,-52.812537,1.585)); +#237098 = LINE('',#237099,#237100); +#237099 = CARTESIAN_POINT('',(177.134802,-52.70509,1.585)); +#237100 = VECTOR('',#237101,1.); +#237101 = DIRECTION('',(0.,-1.,0.)); +#237102 = ORIENTED_EDGE('',*,*,#237103,.T.); +#237103 = EDGE_CURVE('',#237096,#237104,#237106,.T.); +#237104 = VERTEX_POINT('',#237105); +#237105 = CARTESIAN_POINT('',(177.16906,-52.881053,1.585)); +#237106 = LINE('',#237107,#237108); +#237107 = CARTESIAN_POINT('',(177.134802,-52.812537,1.585)); +#237108 = VECTOR('',#237109,1.); +#237109 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#237110 = ORIENTED_EDGE('',*,*,#237111,.T.); +#237111 = EDGE_CURVE('',#237104,#237112,#237114,.T.); +#237112 = VERTEX_POINT('',#237113); +#237113 = CARTESIAN_POINT('',(177.186106,-52.898099,1.585)); +#237114 = LINE('',#237115,#237116); +#237115 = CARTESIAN_POINT('',(177.16906,-52.881053,1.585)); +#237116 = VECTOR('',#237117,1.); +#237117 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#237118 = ORIENTED_EDGE('',*,*,#237119,.T.); +#237119 = EDGE_CURVE('',#237112,#237120,#237122,.T.); +#237120 = VERTEX_POINT('',#237121); +#237121 = CARTESIAN_POINT('',(177.741101,-52.89954,1.585)); +#237122 = LINE('',#237123,#237124); +#237123 = CARTESIAN_POINT('',(177.186106,-52.898099,1.585)); +#237124 = VECTOR('',#237125,1.); +#237125 = DIRECTION('',(0.999996629319,-2.596411035863E-03,0.)); +#237126 = ORIENTED_EDGE('',*,*,#237127,.T.); +#237127 = EDGE_CURVE('',#237120,#237128,#237130,.T.); +#237128 = VERTEX_POINT('',#237129); +#237129 = CARTESIAN_POINT('',(177.726469,-53.048099,1.585)); +#237130 = CIRCLE('',#237131,7.500006711464E-02); +#237131 = AXIS2_PLACEMENT_3D('',#237132,#237133,#237134); +#237132 = CARTESIAN_POINT('',(177.72646906711,-52.97309893288,1.585)); +#237133 = DIRECTION('',(0.,0.,-1.)); +#237134 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#237135 = ORIENTED_EDGE('',*,*,#237136,.T.); +#237136 = EDGE_CURVE('',#237128,#237137,#237139,.T.); +#237137 = VERTEX_POINT('',#237138); +#237138 = CARTESIAN_POINT('',(177.04517,-53.046658,1.585)); +#237139 = LINE('',#237140,#237141); +#237140 = CARTESIAN_POINT('',(177.726469,-53.048099,1.585)); +#237141 = VECTOR('',#237142,1.); +#237142 = DIRECTION('',(-0.999997763232,2.115072496535E-03,0.)); +#237143 = ORIENTED_EDGE('',*,*,#237144,.T.); +#237144 = EDGE_CURVE('',#237137,#237145,#237147,.T.); +#237145 = VERTEX_POINT('',#237146); +#237146 = CARTESIAN_POINT('',(177.016843,-52.912029,1.585)); +#237147 = CIRCLE('',#237148,7.472382541851E-02); +#237148 = AXIS2_PLACEMENT_3D('',#237149,#237150,#237151); +#237149 = CARTESIAN_POINT('',(177.05956681475,-52.97333418524,1.585)); +#237150 = DIRECTION('',(0.,0.,-1.)); +#237151 = DIRECTION('',(-0.192666993072,-0.981264199785,-0.)); +#237152 = ORIENTED_EDGE('',*,*,#237153,.T.); +#237153 = EDGE_CURVE('',#237145,#237154,#237156,.T.); +#237154 = VERTEX_POINT('',#237155); +#237155 = CARTESIAN_POINT('',(176.986243,-52.844874,1.585)); +#237156 = LINE('',#237157,#237158); +#237157 = CARTESIAN_POINT('',(177.016843,-52.912029,1.585)); +#237158 = VECTOR('',#237159,1.); +#237159 = DIRECTION('',(-0.414645032321,0.90998324005,0.)); +#237160 = ORIENTED_EDGE('',*,*,#237161,.T.); +#237161 = EDGE_CURVE('',#237154,#237162,#237164,.T.); +#237162 = VERTEX_POINT('',#237163); +#237163 = CARTESIAN_POINT('',(176.987465,-52.667576,1.585)); +#237164 = LINE('',#237165,#237166); +#237165 = CARTESIAN_POINT('',(176.986243,-52.844874,1.585)); +#237166 = VECTOR('',#237167,1.); +#237167 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#237168 = ORIENTED_EDGE('',*,*,#237169,.T.); +#237169 = EDGE_CURVE('',#237162,#237170,#237172,.T.); +#237170 = VERTEX_POINT('',#237171); +#237171 = CARTESIAN_POINT('',(177.048171,-52.542893,1.585)); +#237172 = LINE('',#237173,#237174); +#237173 = CARTESIAN_POINT('',(176.987465,-52.667576,1.585)); +#237174 = VECTOR('',#237175,1.); +#237175 = DIRECTION('',(0.437753780471,0.899094893592,0.)); +#237176 = ORIENTED_EDGE('',*,*,#237177,.T.); +#237177 = EDGE_CURVE('',#237170,#237178,#237180,.T.); +#237178 = VERTEX_POINT('',#237179); +#237179 = CARTESIAN_POINT('',(177.048171,-52.117592,1.585)); +#237180 = CIRCLE('',#237181,0.347106732746); +#237181 = AXIS2_PLACEMENT_3D('',#237182,#237183,#237184); +#237182 = CARTESIAN_POINT('',(177.32251175302,-52.3302425,1.585)); +#237183 = DIRECTION('',(0.,0.,-1.)); +#237184 = DIRECTION('',(-0.790364251506,-0.612637209073,-0.)); +#237185 = ORIENTED_EDGE('',*,*,#237186,.T.); +#237186 = EDGE_CURVE('',#237178,#236994,#237187,.T.); +#237187 = LINE('',#237188,#237189); +#237188 = CARTESIAN_POINT('',(177.048171,-52.117592,1.585)); +#237189 = VECTOR('',#237190,1.); +#237190 = DIRECTION('',(0.773007961956,0.634396319939,0.)); +#237191 = PLANE('',#237192); +#237192 = AXIS2_PLACEMENT_3D('',#237193,#237194,#237195); +#237193 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237194 = DIRECTION('',(0.,0.,1.)); +#237195 = DIRECTION('',(1.,0.,-0.)); +#237196 = SHELL_BASED_SURFACE_MODEL('',(#237197)); +#237197 = OPEN_SHELL('',(#237198)); +#237198 = ADVANCED_FACE('',(#237199),#237385,.T.); +#237199 = FACE_BOUND('',#237200,.F.); +#237200 = EDGE_LOOP('',(#237201,#237212,#237220,#237228,#237236,#237244, + #237253,#237261,#237270,#237278,#237287,#237295,#237304,#237312, + #237320,#237328,#237337,#237345,#237353,#237362,#237370,#237379)); +#237201 = ORIENTED_EDGE('',*,*,#237202,.T.); +#237202 = EDGE_CURVE('',#237203,#237205,#237207,.T.); +#237203 = VERTEX_POINT('',#237204); +#237204 = CARTESIAN_POINT('',(150.160369,-52.585342,1.585)); +#237205 = VERTEX_POINT('',#237206); +#237206 = CARTESIAN_POINT('',(150.379225,-52.366485,1.585)); +#237207 = CIRCLE('',#237208,0.308109459502); +#237208 = AXIS2_PLACEMENT_3D('',#237209,#237210,#237211); +#237209 = CARTESIAN_POINT('',(150.45818845359,-52.66430409279,1.585)); +#237210 = DIRECTION('',(0.,0.,-1.)); +#237211 = DIRECTION('',(-0.966602758873,0.25627935254,0.)); +#237212 = ORIENTED_EDGE('',*,*,#237213,.T.); +#237213 = EDGE_CURVE('',#237205,#237214,#237216,.T.); +#237214 = VERTEX_POINT('',#237215); +#237215 = CARTESIAN_POINT('',(150.611361,-52.364205,1.585)); +#237216 = LINE('',#237217,#237218); +#237217 = CARTESIAN_POINT('',(150.379225,-52.366485,1.585)); +#237218 = VECTOR('',#237219,1.); +#237219 = DIRECTION('',(0.999951769331,9.821354869878E-03,0.)); +#237220 = ORIENTED_EDGE('',*,*,#237221,.T.); +#237221 = EDGE_CURVE('',#237214,#237222,#237224,.T.); +#237222 = VERTEX_POINT('',#237223); +#237223 = CARTESIAN_POINT('',(150.637237,-52.370432,1.585)); +#237224 = LINE('',#237225,#237226); +#237225 = CARTESIAN_POINT('',(150.611361,-52.364205,1.585)); +#237226 = VECTOR('',#237227,1.); +#237227 = DIRECTION('',(0.97224421645,-0.23396833884,0.)); +#237228 = ORIENTED_EDGE('',*,*,#237229,.T.); +#237229 = EDGE_CURVE('',#237222,#237230,#237232,.T.); +#237230 = VERTEX_POINT('',#237231); +#237231 = CARTESIAN_POINT('',(150.739844,-52.425465,1.585)); +#237232 = LINE('',#237233,#237234); +#237233 = CARTESIAN_POINT('',(150.637237,-52.370432,1.585)); +#237234 = VECTOR('',#237235,1.); +#237235 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#237236 = ORIENTED_EDGE('',*,*,#237237,.T.); +#237237 = EDGE_CURVE('',#237230,#237238,#237240,.T.); +#237238 = VERTEX_POINT('',#237239); +#237239 = CARTESIAN_POINT('',(150.794878,-52.485216,1.585)); +#237240 = LINE('',#237241,#237242); +#237241 = CARTESIAN_POINT('',(150.739844,-52.425465,1.585)); +#237242 = VECTOR('',#237243,1.); +#237243 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#237244 = ORIENTED_EDGE('',*,*,#237245,.T.); +#237245 = EDGE_CURVE('',#237238,#237246,#237248,.T.); +#237246 = VERTEX_POINT('',#237247); +#237247 = CARTESIAN_POINT('',(150.788491,-52.980153,1.585)); +#237248 = CIRCLE('',#237249,0.457783772261); +#237249 = AXIS2_PLACEMENT_3D('',#237250,#237251,#237252); +#237250 = CARTESIAN_POINT('',(150.40659953493,-52.72771510455,1.585)); +#237251 = DIRECTION('',(0.,0.,-1.)); +#237252 = DIRECTION('',(0.848170006438,0.529724117044,0.)); +#237253 = ORIENTED_EDGE('',*,*,#237254,.T.); +#237254 = EDGE_CURVE('',#237246,#237255,#237257,.T.); +#237255 = VERTEX_POINT('',#237256); +#237256 = CARTESIAN_POINT('',(150.739843,-53.031675,1.585)); +#237257 = LINE('',#237258,#237259); +#237258 = CARTESIAN_POINT('',(150.788491,-52.980153,1.585)); +#237259 = VECTOR('',#237260,1.); +#237260 = DIRECTION('',(-0.686536505862,-0.727095334958,0.)); +#237261 = ORIENTED_EDGE('',*,*,#237262,.T.); +#237262 = EDGE_CURVE('',#237255,#237263,#237265,.T.); +#237263 = VERTEX_POINT('',#237264); +#237264 = CARTESIAN_POINT('',(150.647921,-52.939751,1.585)); +#237265 = CIRCLE('',#237266,6.499937665137E-02); +#237266 = AXIS2_PLACEMENT_3D('',#237267,#237268,#237269); +#237267 = CARTESIAN_POINT('',(150.69388218097,-52.98571281902,1.585)); +#237268 = DIRECTION('',(-0.,0.,-1.)); +#237269 = DIRECTION('',(0.707096304454,-0.707117257764,-0.)); +#237270 = ORIENTED_EDGE('',*,*,#237271,.T.); +#237271 = EDGE_CURVE('',#237263,#237272,#237274,.T.); +#237272 = VERTEX_POINT('',#237273); +#237273 = CARTESIAN_POINT('',(150.683319,-52.904353,1.585)); +#237274 = LINE('',#237275,#237276); +#237275 = CARTESIAN_POINT('',(150.647921,-52.939751,1.585)); +#237276 = VECTOR('',#237277,1.); +#237277 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#237278 = ORIENTED_EDGE('',*,*,#237279,.T.); +#237279 = EDGE_CURVE('',#237272,#237280,#237282,.T.); +#237280 = VERTEX_POINT('',#237281); +#237281 = CARTESIAN_POINT('',(150.683319,-52.552788,1.585)); +#237282 = CIRCLE('',#237283,0.325008683278); +#237283 = AXIS2_PLACEMENT_3D('',#237284,#237285,#237286); +#237284 = CARTESIAN_POINT('',(150.409949,-52.7285705,1.585)); +#237285 = DIRECTION('',(0.,-0.,1.)); +#237286 = DIRECTION('',(0.841115988787,-0.54085478033,-0.)); +#237287 = ORIENTED_EDGE('',*,*,#237288,.T.); +#237288 = EDGE_CURVE('',#237280,#237289,#237291,.T.); +#237289 = VERTEX_POINT('',#237290); +#237290 = CARTESIAN_POINT('',(150.655379,-52.524848,1.585)); +#237291 = LINE('',#237292,#237293); +#237292 = CARTESIAN_POINT('',(150.683319,-52.552788,1.585)); +#237293 = VECTOR('',#237294,1.); +#237294 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#237295 = ORIENTED_EDGE('',*,*,#237296,.T.); +#237296 = EDGE_CURVE('',#237289,#237297,#237299,.T.); +#237297 = VERTEX_POINT('',#237298); +#237298 = CARTESIAN_POINT('',(150.346671,-52.524848,1.585)); +#237299 = CIRCLE('',#237300,0.277419178293); +#237300 = AXIS2_PLACEMENT_3D('',#237301,#237302,#237303); +#237301 = CARTESIAN_POINT('',(150.501025,-52.755361,1.585)); +#237302 = DIRECTION('',(0.,0.,1.)); +#237303 = DIRECTION('',(0.556392679661,0.830919482272,-0.)); +#237304 = ORIENTED_EDGE('',*,*,#237305,.T.); +#237305 = EDGE_CURVE('',#237297,#237306,#237308,.T.); +#237306 = VERTEX_POINT('',#237307); +#237307 = CARTESIAN_POINT('',(150.318733,-52.552786,1.585)); +#237308 = LINE('',#237309,#237310); +#237309 = CARTESIAN_POINT('',(150.346671,-52.524848,1.585)); +#237310 = VECTOR('',#237311,1.); +#237311 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#237312 = ORIENTED_EDGE('',*,*,#237313,.T.); +#237313 = EDGE_CURVE('',#237306,#237314,#237316,.T.); +#237314 = VERTEX_POINT('',#237315); +#237315 = CARTESIAN_POINT('',(150.287454,-52.615344,1.585)); +#237316 = LINE('',#237317,#237318); +#237317 = CARTESIAN_POINT('',(150.318733,-52.552786,1.585)); +#237318 = VECTOR('',#237319,1.); +#237319 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#237320 = ORIENTED_EDGE('',*,*,#237321,.T.); +#237321 = EDGE_CURVE('',#237314,#237322,#237324,.T.); +#237322 = VERTEX_POINT('',#237323); +#237323 = CARTESIAN_POINT('',(150.287454,-52.72857,1.585)); +#237324 = LINE('',#237325,#237326); +#237325 = CARTESIAN_POINT('',(150.287454,-52.615344,1.585)); +#237326 = VECTOR('',#237327,1.); +#237327 = DIRECTION('',(0.,-1.,0.)); +#237328 = ORIENTED_EDGE('',*,*,#237329,.T.); +#237329 = EDGE_CURVE('',#237322,#237330,#237332,.T.); +#237330 = VERTEX_POINT('',#237331); +#237331 = CARTESIAN_POINT('',(150.179652,-52.777488,1.585)); +#237332 = CIRCLE('',#237333,6.500010429712E-02); +#237333 = AXIS2_PLACEMENT_3D('',#237334,#237335,#237336); +#237334 = CARTESIAN_POINT('',(150.2224538957,-52.72856958544,1.585)); +#237335 = DIRECTION('',(-0.,0.,-1.)); +#237336 = DIRECTION('',(0.99999999998,-6.377788786916E-06,-0.)); +#237337 = ORIENTED_EDGE('',*,*,#237338,.T.); +#237338 = EDGE_CURVE('',#237330,#237339,#237341,.T.); +#237339 = VERTEX_POINT('',#237340); +#237340 = CARTESIAN_POINT('',(149.944597,-52.571814,1.585)); +#237341 = LINE('',#237342,#237343); +#237342 = CARTESIAN_POINT('',(150.179652,-52.777488,1.585)); +#237343 = VECTOR('',#237344,1.); +#237344 = DIRECTION('',(-0.752575306358,0.65850619455,0.)); +#237345 = ORIENTED_EDGE('',*,*,#237346,.T.); +#237346 = EDGE_CURVE('',#237339,#237347,#237349,.T.); +#237347 = VERTEX_POINT('',#237348); +#237348 = CARTESIAN_POINT('',(149.944597,-52.985713,1.585)); +#237349 = LINE('',#237350,#237351); +#237350 = CARTESIAN_POINT('',(149.944597,-52.571814,1.585)); +#237351 = VECTOR('',#237352,1.); +#237352 = DIRECTION('',(0.,-1.,0.)); +#237353 = ORIENTED_EDGE('',*,*,#237354,.T.); +#237354 = EDGE_CURVE('',#237347,#237355,#237357,.T.); +#237355 = VERTEX_POINT('',#237356); +#237356 = CARTESIAN_POINT('',(149.814597,-52.985713,1.585)); +#237357 = CIRCLE('',#237358,6.500000000091E-02); +#237358 = AXIS2_PLACEMENT_3D('',#237359,#237360,#237361); +#237359 = CARTESIAN_POINT('',(149.879597,-52.98571265513,1.585)); +#237360 = DIRECTION('',(-0.,0.,-1.)); +#237361 = DIRECTION('',(0.999999999986,-5.305658025669E-06,-0.)); +#237362 = ORIENTED_EDGE('',*,*,#237363,.T.); +#237363 = EDGE_CURVE('',#237355,#237364,#237366,.T.); +#237364 = VERTEX_POINT('',#237365); +#237365 = CARTESIAN_POINT('',(149.814597,-52.42857,1.585)); +#237366 = LINE('',#237367,#237368); +#237367 = CARTESIAN_POINT('',(149.814597,-52.985713,1.585)); +#237368 = VECTOR('',#237369,1.); +#237369 = DIRECTION('',(0.,1.,0.)); +#237370 = ORIENTED_EDGE('',*,*,#237371,.T.); +#237371 = EDGE_CURVE('',#237364,#237372,#237374,.T.); +#237372 = VERTEX_POINT('',#237373); +#237373 = CARTESIAN_POINT('',(149.9224,-52.379653,1.585)); +#237374 = CIRCLE('',#237375,6.500002288387E-02); +#237375 = AXIS2_PLACEMENT_3D('',#237376,#237377,#237378); +#237376 = CARTESIAN_POINT('',(149.87959702288,-52.42857036015,1.585)); +#237377 = DIRECTION('',(0.,0.,-1.)); +#237378 = DIRECTION('',(-0.999999999985,5.54088802518E-06,0.)); +#237379 = ORIENTED_EDGE('',*,*,#237380,.T.); +#237380 = EDGE_CURVE('',#237372,#237203,#237381,.T.); +#237381 = LINE('',#237382,#237383); +#237382 = CARTESIAN_POINT('',(149.9224,-52.379653,1.585)); +#237383 = VECTOR('',#237384,1.); +#237384 = DIRECTION('',(0.756555088603,-0.65392996407,0.)); +#237385 = PLANE('',#237386); +#237386 = AXIS2_PLACEMENT_3D('',#237387,#237388,#237389); +#237387 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237388 = DIRECTION('',(0.,0.,1.)); +#237389 = DIRECTION('',(1.,0.,-0.)); +#237390 = SHELL_BASED_SURFACE_MODEL('',(#237391)); +#237391 = OPEN_SHELL('',(#237392)); +#237392 = ADVANCED_FACE('',(#237393),#237563,.T.); +#237393 = FACE_BOUND('',#237394,.F.); +#237394 = EDGE_LOOP('',(#237395,#237406,#237414,#237423,#237431,#237440, + #237448,#237456,#237464,#237473,#237481,#237490,#237498,#237507, + #237515,#237524,#237532,#237540,#237548,#237557)); +#237395 = ORIENTED_EDGE('',*,*,#237396,.T.); +#237396 = EDGE_CURVE('',#237397,#237399,#237401,.T.); +#237397 = VERTEX_POINT('',#237398); +#237398 = CARTESIAN_POINT('',(142.299349,-52.36118,1.585)); +#237399 = VERTEX_POINT('',#237400); +#237400 = CARTESIAN_POINT('',(142.391273,-52.453104,1.585)); +#237401 = CIRCLE('',#237402,6.50000837538E-02); +#237402 = AXIS2_PLACEMENT_3D('',#237403,#237404,#237405); +#237403 = CARTESIAN_POINT('',(142.34531098493,-52.40714201506,1.585)); +#237404 = DIRECTION('',(0.,0.,-1.)); +#237405 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#237406 = ORIENTED_EDGE('',*,*,#237407,.T.); +#237407 = EDGE_CURVE('',#237399,#237408,#237410,.T.); +#237408 = VERTEX_POINT('',#237409); +#237409 = CARTESIAN_POINT('',(142.359266,-52.48511,1.585)); +#237410 = LINE('',#237411,#237412); +#237411 = CARTESIAN_POINT('',(142.391273,-52.453104,1.585)); +#237412 = VECTOR('',#237413,1.); +#237413 = DIRECTION('',(-0.7071178274,-0.7070957348,0.)); +#237414 = ORIENTED_EDGE('',*,*,#237415,.T.); +#237415 = EDGE_CURVE('',#237408,#237416,#237418,.T.); +#237416 = VERTEX_POINT('',#237417); +#237417 = CARTESIAN_POINT('',(142.359265,-52.757743,1.585)); +#237418 = CIRCLE('',#237419,0.272201331757); +#237419 = AXIS2_PLACEMENT_3D('',#237420,#237421,#237422); +#237420 = CARTESIAN_POINT('',(142.59487402454,-52.62142736419,1.585)); +#237421 = DIRECTION('',(0.,0.,1.)); +#237422 = DIRECTION('',(-0.865565289566,0.50079609573,0.)); +#237423 = ORIENTED_EDGE('',*,*,#237424,.T.); +#237424 = EDGE_CURVE('',#237416,#237425,#237427,.T.); +#237425 = VERTEX_POINT('',#237426); +#237426 = CARTESIAN_POINT('',(142.426669,-52.825149,1.585)); +#237427 = LINE('',#237428,#237429); +#237428 = CARTESIAN_POINT('',(142.359265,-52.757743,1.585)); +#237429 = VECTOR('',#237430,1.); +#237430 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#237431 = ORIENTED_EDGE('',*,*,#237432,.T.); +#237432 = EDGE_CURVE('',#237425,#237433,#237435,.T.); +#237433 = VERTEX_POINT('',#237434); +#237434 = CARTESIAN_POINT('',(142.765881,-52.899285,1.585)); +#237435 = CIRCLE('',#237436,0.553317785495); +#237436 = AXIS2_PLACEMENT_3D('',#237437,#237438,#237439); +#237437 = CARTESIAN_POINT('',(142.7084500839,-52.34895576979,1.585)); +#237438 = DIRECTION('',(0.,0.,1.)); +#237439 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#237440 = ORIENTED_EDGE('',*,*,#237441,.T.); +#237441 = EDGE_CURVE('',#237433,#237442,#237444,.T.); +#237442 = VERTEX_POINT('',#237443); +#237443 = CARTESIAN_POINT('',(142.922622,-52.860099,1.585)); +#237444 = LINE('',#237445,#237446); +#237445 = CARTESIAN_POINT('',(142.765881,-52.899285,1.585)); +#237446 = VECTOR('',#237447,1.); +#237447 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#237448 = ORIENTED_EDGE('',*,*,#237449,.T.); +#237449 = EDGE_CURVE('',#237442,#237450,#237452,.T.); +#237450 = VERTEX_POINT('',#237451); +#237451 = CARTESIAN_POINT('',(142.992522,-52.82515,1.585)); +#237452 = LINE('',#237453,#237454); +#237453 = CARTESIAN_POINT('',(142.922622,-52.860099,1.585)); +#237454 = VECTOR('',#237455,1.); +#237455 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#237456 = ORIENTED_EDGE('',*,*,#237457,.T.); +#237457 = EDGE_CURVE('',#237450,#237458,#237460,.T.); +#237458 = VERTEX_POINT('',#237459); +#237459 = CARTESIAN_POINT('',(143.059928,-52.757743,1.585)); +#237460 = LINE('',#237461,#237462); +#237461 = CARTESIAN_POINT('',(142.992522,-52.82515,1.585)); +#237462 = VECTOR('',#237463,1.); +#237463 = DIRECTION('',(0.707101536074,0.707112026261,0.)); +#237464 = ORIENTED_EDGE('',*,*,#237465,.T.); +#237465 = EDGE_CURVE('',#237458,#237466,#237468,.T.); +#237466 = VERTEX_POINT('',#237467); +#237467 = CARTESIAN_POINT('',(143.059928,-52.485111,1.585)); +#237468 = CIRCLE('',#237469,0.272194686174); +#237469 = AXIS2_PLACEMENT_3D('',#237470,#237471,#237472); +#237470 = CARTESIAN_POINT('',(142.82432686391,-52.621427,1.585)); +#237471 = DIRECTION('',(0.,-0.,1.)); +#237472 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#237473 = ORIENTED_EDGE('',*,*,#237474,.T.); +#237474 = EDGE_CURVE('',#237466,#237475,#237477,.T.); +#237475 = VERTEX_POINT('',#237476); +#237476 = CARTESIAN_POINT('',(143.027921,-52.453104,1.585)); +#237477 = LINE('',#237478,#237479); +#237478 = CARTESIAN_POINT('',(143.059928,-52.485111,1.585)); +#237479 = VECTOR('',#237480,1.); +#237480 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#237481 = ORIENTED_EDGE('',*,*,#237482,.T.); +#237482 = EDGE_CURVE('',#237475,#237483,#237485,.T.); +#237483 = VERTEX_POINT('',#237484); +#237484 = CARTESIAN_POINT('',(143.119843,-52.36118,1.585)); +#237485 = CIRCLE('',#237486,6.49993766517E-02); +#237486 = AXIS2_PLACEMENT_3D('',#237487,#237488,#237489); +#237487 = CARTESIAN_POINT('',(143.07388176676,-52.40714176677,1.585)); +#237488 = DIRECTION('',(0.,0.,-1.)); +#237489 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#237490 = ORIENTED_EDGE('',*,*,#237491,.T.); +#237491 = EDGE_CURVE('',#237483,#237492,#237494,.T.); +#237492 = VERTEX_POINT('',#237493); +#237493 = CARTESIAN_POINT('',(143.171003,-52.416461,1.585)); +#237494 = LINE('',#237495,#237496); +#237495 = CARTESIAN_POINT('',(143.119843,-52.36118,1.585)); +#237496 = VECTOR('',#237497,1.); +#237497 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#237498 = ORIENTED_EDGE('',*,*,#237499,.T.); +#237499 = EDGE_CURVE('',#237492,#237500,#237502,.T.); +#237500 = VERTEX_POINT('',#237501); +#237501 = CARTESIAN_POINT('',(143.170999,-52.826399,1.585)); +#237502 = CIRCLE('',#237503,0.409312568567); +#237503 = AXIS2_PLACEMENT_3D('',#237504,#237505,#237506); +#237504 = CARTESIAN_POINT('',(142.81670664807,-52.62142654294,1.585)); +#237505 = DIRECTION('',(0.,0.,-1.)); +#237506 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#237507 = ORIENTED_EDGE('',*,*,#237508,.T.); +#237508 = EDGE_CURVE('',#237500,#237509,#237511,.T.); +#237509 = VERTEX_POINT('',#237510); +#237510 = CARTESIAN_POINT('',(143.068322,-52.930322,1.585)); +#237511 = LINE('',#237512,#237513); +#237512 = CARTESIAN_POINT('',(143.170999,-52.826399,1.585)); +#237513 = VECTOR('',#237514,1.); +#237514 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#237515 = ORIENTED_EDGE('',*,*,#237516,.T.); +#237516 = EDGE_CURVE('',#237509,#237517,#237519,.T.); +#237517 = VERTEX_POINT('',#237518); +#237518 = CARTESIAN_POINT('',(142.629546,-53.027344,1.585)); +#237519 = CIRCLE('',#237520,0.675422176574); +#237520 = AXIS2_PLACEMENT_3D('',#237521,#237522,#237523); +#237521 = CARTESIAN_POINT('',(142.71141275007,-52.35690164465,1.585)); +#237522 = DIRECTION('',(0.,0.,-1.)); +#237523 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#237524 = ORIENTED_EDGE('',*,*,#237525,.T.); +#237525 = EDGE_CURVE('',#237517,#237526,#237528,.T.); +#237526 = VERTEX_POINT('',#237527); +#237527 = CARTESIAN_POINT('',(142.444813,-52.979566,1.585)); +#237528 = LINE('',#237529,#237530); +#237529 = CARTESIAN_POINT('',(142.629546,-53.027344,1.585)); +#237530 = VECTOR('',#237531,1.); +#237531 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#237532 = ORIENTED_EDGE('',*,*,#237533,.T.); +#237533 = EDGE_CURVE('',#237526,#237534,#237536,.T.); +#237534 = VERTEX_POINT('',#237535); +#237535 = CARTESIAN_POINT('',(142.342206,-52.924533,1.585)); +#237536 = LINE('',#237537,#237538); +#237537 = CARTESIAN_POINT('',(142.444813,-52.979566,1.585)); +#237538 = VECTOR('',#237539,1.); +#237539 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#237540 = ORIENTED_EDGE('',*,*,#237541,.T.); +#237541 = EDGE_CURVE('',#237534,#237542,#237544,.T.); +#237542 = VERTEX_POINT('',#237543); +#237543 = CARTESIAN_POINT('',(142.248191,-52.826395,1.585)); +#237544 = LINE('',#237545,#237546); +#237545 = CARTESIAN_POINT('',(142.342206,-52.924533,1.585)); +#237546 = VECTOR('',#237547,1.); +#237547 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#237548 = ORIENTED_EDGE('',*,*,#237549,.T.); +#237549 = EDGE_CURVE('',#237542,#237550,#237552,.T.); +#237550 = VERTEX_POINT('',#237551); +#237551 = CARTESIAN_POINT('',(142.248194,-52.416455,1.585)); +#237552 = CIRCLE('',#237553,0.409312909751); +#237553 = AXIS2_PLACEMENT_3D('',#237554,#237555,#237556); +#237554 = CARTESIAN_POINT('',(142.60248666757,-52.62142759277,1.585)); +#237555 = DIRECTION('',(0.,0.,-1.)); +#237556 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#237557 = ORIENTED_EDGE('',*,*,#237558,.T.); +#237558 = EDGE_CURVE('',#237550,#237397,#237559,.T.); +#237559 = LINE('',#237560,#237561); +#237560 = CARTESIAN_POINT('',(142.248194,-52.416455,1.585)); +#237561 = VECTOR('',#237562,1.); +#237562 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#237563 = PLANE('',#237564); +#237564 = AXIS2_PLACEMENT_3D('',#237565,#237566,#237567); +#237565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237566 = DIRECTION('',(0.,0.,1.)); +#237567 = DIRECTION('',(1.,0.,-0.)); +#237568 = SHELL_BASED_SURFACE_MODEL('',(#237569)); +#237569 = OPEN_SHELL('',(#237570)); +#237570 = ADVANCED_FACE('',(#237571),#237681,.T.); +#237571 = FACE_BOUND('',#237572,.F.); +#237572 = EDGE_LOOP('',(#237573,#237584,#237592,#237600,#237609,#237617, + #237625,#237634,#237642,#237650,#237659,#237667,#237675)); +#237573 = ORIENTED_EDGE('',*,*,#237574,.T.); +#237574 = EDGE_CURVE('',#237575,#237577,#237579,.T.); +#237575 = VERTEX_POINT('',#237576); +#237576 = CARTESIAN_POINT('',(152.788717,-52.150139,1.585)); +#237577 = VERTEX_POINT('',#237578); +#237578 = CARTESIAN_POINT('',(152.90415,-52.1731,1.585)); +#237579 = CIRCLE('',#237580,6.000007318647E-02); +#237580 = AXIS2_PLACEMENT_3D('',#237581,#237582,#237583); +#237581 = CARTESIAN_POINT('',(152.84414992681,-52.17309982331,1.585)); +#237582 = DIRECTION('',(0.,0.,-1.)); +#237583 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#237584 = ORIENTED_EDGE('',*,*,#237585,.T.); +#237585 = EDGE_CURVE('',#237577,#237586,#237588,.T.); +#237586 = VERTEX_POINT('',#237587); +#237587 = CARTESIAN_POINT('',(152.90415,-52.50685,1.585)); +#237588 = LINE('',#237589,#237590); +#237589 = CARTESIAN_POINT('',(152.90415,-52.1731,1.585)); +#237590 = VECTOR('',#237591,1.); +#237591 = DIRECTION('',(0.,-1.,0.)); +#237592 = ORIENTED_EDGE('',*,*,#237593,.T.); +#237593 = EDGE_CURVE('',#237586,#237594,#237596,.T.); +#237594 = VERTEX_POINT('',#237595); +#237595 = CARTESIAN_POINT('',(153.2379,-52.50685,1.585)); +#237596 = LINE('',#237597,#237598); +#237597 = CARTESIAN_POINT('',(152.90415,-52.50685,1.585)); +#237598 = VECTOR('',#237599,1.); +#237599 = DIRECTION('',(1.,0.,0.)); +#237600 = ORIENTED_EDGE('',*,*,#237601,.T.); +#237601 = EDGE_CURVE('',#237594,#237602,#237604,.T.); +#237602 = VERTEX_POINT('',#237603); +#237603 = CARTESIAN_POINT('',(153.2379,-52.62685,1.585)); +#237604 = CIRCLE('',#237605,6.000000000043E-02); +#237605 = AXIS2_PLACEMENT_3D('',#237606,#237607,#237608); +#237606 = CARTESIAN_POINT('',(153.23790022558,-52.56685,1.585)); +#237607 = DIRECTION('',(0.,0.,-1.)); +#237608 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#237609 = ORIENTED_EDGE('',*,*,#237610,.T.); +#237610 = EDGE_CURVE('',#237602,#237611,#237613,.T.); +#237611 = VERTEX_POINT('',#237612); +#237612 = CARTESIAN_POINT('',(152.90415,-52.62685,1.585)); +#237613 = LINE('',#237614,#237615); +#237614 = CARTESIAN_POINT('',(153.2379,-52.62685,1.585)); +#237615 = VECTOR('',#237616,1.); +#237616 = DIRECTION('',(-1.,0.,0.)); +#237617 = ORIENTED_EDGE('',*,*,#237618,.T.); +#237618 = EDGE_CURVE('',#237611,#237619,#237621,.T.); +#237619 = VERTEX_POINT('',#237620); +#237620 = CARTESIAN_POINT('',(152.90415,-52.9606,1.585)); +#237621 = LINE('',#237622,#237623); +#237622 = CARTESIAN_POINT('',(152.90415,-52.62685,1.585)); +#237623 = VECTOR('',#237624,1.); +#237624 = DIRECTION('',(0.,-1.,0.)); +#237625 = ORIENTED_EDGE('',*,*,#237626,.T.); +#237626 = EDGE_CURVE('',#237619,#237627,#237629,.T.); +#237627 = VERTEX_POINT('',#237628); +#237628 = CARTESIAN_POINT('',(152.78415,-52.9606,1.585)); +#237629 = CIRCLE('',#237630,6.000000000042E-02); +#237630 = AXIS2_PLACEMENT_3D('',#237631,#237632,#237633); +#237631 = CARTESIAN_POINT('',(152.84415,-52.96060022558,1.585)); +#237632 = DIRECTION('',(0.,0.,-1.)); +#237633 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#237634 = ORIENTED_EDGE('',*,*,#237635,.T.); +#237635 = EDGE_CURVE('',#237627,#237636,#237638,.T.); +#237636 = VERTEX_POINT('',#237637); +#237637 = CARTESIAN_POINT('',(152.78415,-52.62685,1.585)); +#237638 = LINE('',#237639,#237640); +#237639 = CARTESIAN_POINT('',(152.78415,-52.9606,1.585)); +#237640 = VECTOR('',#237641,1.); +#237641 = DIRECTION('',(0.,1.,0.)); +#237642 = ORIENTED_EDGE('',*,*,#237643,.T.); +#237643 = EDGE_CURVE('',#237636,#237644,#237646,.T.); +#237644 = VERTEX_POINT('',#237645); +#237645 = CARTESIAN_POINT('',(152.4504,-52.62685,1.585)); +#237646 = LINE('',#237647,#237648); +#237647 = CARTESIAN_POINT('',(152.78415,-52.62685,1.585)); +#237648 = VECTOR('',#237649,1.); +#237649 = DIRECTION('',(-1.,0.,0.)); +#237650 = ORIENTED_EDGE('',*,*,#237651,.T.); +#237651 = EDGE_CURVE('',#237644,#237652,#237654,.T.); +#237652 = VERTEX_POINT('',#237653); +#237653 = CARTESIAN_POINT('',(152.4504,-52.50685,1.585)); +#237654 = CIRCLE('',#237655,6.000000000042E-02); +#237655 = AXIS2_PLACEMENT_3D('',#237656,#237657,#237658); +#237656 = CARTESIAN_POINT('',(152.45039977441,-52.56685,1.585)); +#237657 = DIRECTION('',(0.,0.,-1.)); +#237658 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#237659 = ORIENTED_EDGE('',*,*,#237660,.T.); +#237660 = EDGE_CURVE('',#237652,#237661,#237663,.T.); +#237661 = VERTEX_POINT('',#237662); +#237662 = CARTESIAN_POINT('',(152.78415,-52.50685,1.585)); +#237663 = LINE('',#237664,#237665); +#237664 = CARTESIAN_POINT('',(152.4504,-52.50685,1.585)); +#237665 = VECTOR('',#237666,1.); +#237666 = DIRECTION('',(1.,0.,0.)); +#237667 = ORIENTED_EDGE('',*,*,#237668,.T.); +#237668 = EDGE_CURVE('',#237661,#237669,#237671,.T.); +#237669 = VERTEX_POINT('',#237670); +#237670 = CARTESIAN_POINT('',(152.78415,-52.1731,1.585)); +#237671 = LINE('',#237672,#237673); +#237672 = CARTESIAN_POINT('',(152.78415,-52.50685,1.585)); +#237673 = VECTOR('',#237674,1.); +#237674 = DIRECTION('',(0.,1.,0.)); +#237675 = ORIENTED_EDGE('',*,*,#237676,.T.); +#237676 = EDGE_CURVE('',#237669,#237575,#237677,.T.); +#237677 = LINE('',#237678,#237679); +#237678 = CARTESIAN_POINT('',(152.78415,-52.1731,1.585)); +#237679 = VECTOR('',#237680,1.); +#237680 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#237681 = PLANE('',#237682); +#237682 = AXIS2_PLACEMENT_3D('',#237683,#237684,#237685); +#237683 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237684 = DIRECTION('',(0.,0.,1.)); +#237685 = DIRECTION('',(1.,0.,-0.)); +#237686 = SHELL_BASED_SURFACE_MODEL('',(#237687)); +#237687 = OPEN_SHELL('',(#237688)); +#237688 = ADVANCED_FACE('',(#237689),#237816,.T.); +#237689 = FACE_BOUND('',#237690,.F.); +#237690 = EDGE_LOOP('',(#237691,#237702,#237710,#237719,#237727,#237735, + #237744,#237752,#237761,#237769,#237777,#237786,#237794,#237802, + #237810)); +#237691 = ORIENTED_EDGE('',*,*,#237692,.T.); +#237692 = EDGE_CURVE('',#237693,#237695,#237697,.T.); +#237693 = VERTEX_POINT('',#237694); +#237694 = CARTESIAN_POINT('',(134.695417,-52.153144,1.585)); +#237695 = VERTEX_POINT('',#237696); +#237696 = CARTESIAN_POINT('',(134.774652,-52.079624,1.585)); +#237697 = CIRCLE('',#237698,6.499974290213E-02); +#237698 = AXIS2_PLACEMENT_3D('',#237699,#237700,#237701); +#237699 = CARTESIAN_POINT('',(134.75959745151,-52.14285632675,1.585)); +#237700 = DIRECTION('',(0.,0.,-1.)); +#237701 = DIRECTION('',(-0.987395467259,-0.158272522053,-0.)); +#237702 = ORIENTED_EDGE('',*,*,#237703,.T.); +#237703 = EDGE_CURVE('',#237695,#237704,#237706,.T.); +#237704 = VERTEX_POINT('',#237705); +#237705 = CARTESIAN_POINT('',(135.674652,-52.293908,1.585)); +#237706 = LINE('',#237707,#237708); +#237707 = CARTESIAN_POINT('',(134.774652,-52.079624,1.585)); +#237708 = VECTOR('',#237709,1.); +#237709 = DIRECTION('',(0.972806632197,-0.231618773749,0.)); +#237710 = ORIENTED_EDGE('',*,*,#237711,.T.); +#237711 = EDGE_CURVE('',#237704,#237712,#237714,.T.); +#237712 = VERTEX_POINT('',#237713); +#237713 = CARTESIAN_POINT('',(135.676345,-52.419946,1.585)); +#237714 = CIRCLE('',#237715,6.500038054112E-02); +#237715 = AXIS2_PLACEMENT_3D('',#237716,#237717,#237718); +#237716 = CARTESIAN_POINT('',(135.65959589274,-52.35714061108,1.585)); +#237717 = DIRECTION('',(0.,0.,-1.)); +#237718 = DIRECTION('',(0.231631063247,0.972803706068,0.)); +#237719 = ORIENTED_EDGE('',*,*,#237720,.T.); +#237720 = EDGE_CURVE('',#237712,#237721,#237723,.T.); +#237721 = VERTEX_POINT('',#237722); +#237722 = CARTESIAN_POINT('',(135.269006,-52.528569,1.585)); +#237723 = LINE('',#237724,#237725); +#237724 = CARTESIAN_POINT('',(135.676345,-52.419946,1.585)); +#237725 = VECTOR('',#237726,1.); +#237726 = DIRECTION('',(-0.966235372674,-0.257661026531,0.)); +#237727 = ORIENTED_EDGE('',*,*,#237728,.T.); +#237728 = EDGE_CURVE('',#237721,#237729,#237731,.T.); +#237729 = VERTEX_POINT('',#237730); +#237730 = CARTESIAN_POINT('',(135.676345,-52.637193,1.585)); +#237731 = LINE('',#237732,#237733); +#237732 = CARTESIAN_POINT('',(135.269006,-52.528569,1.585)); +#237733 = VECTOR('',#237734,1.); +#237734 = DIRECTION('',(0.96623478212,-0.257663241116,0.)); +#237735 = ORIENTED_EDGE('',*,*,#237736,.T.); +#237736 = EDGE_CURVE('',#237729,#237737,#237739,.T.); +#237737 = VERTEX_POINT('',#237738); +#237738 = CARTESIAN_POINT('',(135.674653,-52.76323,1.585)); +#237739 = CIRCLE('',#237740,6.499990114103E-02); +#237740 = AXIS2_PLACEMENT_3D('',#237741,#237742,#237743); +#237741 = CARTESIAN_POINT('',(135.65959634257,-52.69999801272,1.585)); +#237742 = DIRECTION('',(0.,0.,-1.)); +#237743 = DIRECTION('',(0.257672044635,0.966232434466,0.)); +#237744 = ORIENTED_EDGE('',*,*,#237745,.T.); +#237745 = EDGE_CURVE('',#237737,#237746,#237748,.T.); +#237746 = VERTEX_POINT('',#237747); +#237747 = CARTESIAN_POINT('',(134.774652,-52.977516,1.585)); +#237748 = LINE('',#237749,#237750); +#237749 = CARTESIAN_POINT('',(135.674653,-52.76323,1.585)); +#237750 = VECTOR('',#237751,1.); +#237751 = DIRECTION('',(-0.972806203088,-0.231620576016,0.)); +#237752 = ORIENTED_EDGE('',*,*,#237753,.T.); +#237753 = EDGE_CURVE('',#237746,#237754,#237756,.T.); +#237754 = VERTEX_POINT('',#237755); +#237755 = CARTESIAN_POINT('',(134.744542,-52.851052,1.585)); +#237756 = CIRCLE('',#237757,6.499952960857E-02); +#237757 = AXIS2_PLACEMENT_3D('',#237758,#237759,#237760); +#237758 = CARTESIAN_POINT('',(134.75959643655,-52.91428413415,1.585)); +#237759 = DIRECTION('',(0.,0.,-1.)); +#237760 = DIRECTION('',(0.231625729228,-0.972804976118,0.)); +#237761 = ORIENTED_EDGE('',*,*,#237762,.T.); +#237762 = EDGE_CURVE('',#237754,#237763,#237765,.T.); +#237763 = VERTEX_POINT('',#237764); +#237764 = CARTESIAN_POINT('',(135.393951,-52.69643,1.585)); +#237765 = LINE('',#237766,#237767); +#237766 = CARTESIAN_POINT('',(134.744542,-52.851052,1.585)); +#237767 = VECTOR('',#237768,1.); +#237768 = DIRECTION('',(0.972805941447,0.231621674905,0.)); +#237769 = ORIENTED_EDGE('',*,*,#237770,.T.); +#237770 = EDGE_CURVE('',#237763,#237771,#237773,.T.); +#237771 = VERTEX_POINT('',#237772); +#237772 = CARTESIAN_POINT('',(134.999992,-52.591375,1.585)); +#237773 = LINE('',#237774,#237775); +#237774 = CARTESIAN_POINT('',(135.393951,-52.69643,1.585)); +#237775 = VECTOR('',#237776,1.); +#237776 = DIRECTION('',(-0.966235387383,0.257660971374,0.)); +#237777 = ORIENTED_EDGE('',*,*,#237778,.T.); +#237778 = EDGE_CURVE('',#237771,#237779,#237781,.T.); +#237779 = VERTEX_POINT('',#237780); +#237780 = CARTESIAN_POINT('',(134.999992,-52.465765,1.585)); +#237781 = CIRCLE('',#237782,6.499988512274E-02); +#237782 = AXIS2_PLACEMENT_3D('',#237783,#237784,#237785); +#237783 = CARTESIAN_POINT('',(135.01674064295,-52.52857,1.585)); +#237784 = DIRECTION('',(0.,0.,-1.)); +#237785 = DIRECTION('',(-0.257671885533,-0.966232476895,-0.)); +#237786 = ORIENTED_EDGE('',*,*,#237787,.T.); +#237787 = EDGE_CURVE('',#237779,#237788,#237790,.T.); +#237788 = VERTEX_POINT('',#237789); +#237789 = CARTESIAN_POINT('',(135.393951,-52.360708,1.585)); +#237790 = LINE('',#237791,#237792); +#237791 = CARTESIAN_POINT('',(134.999992,-52.465765,1.585)); +#237792 = VECTOR('',#237793,1.); +#237793 = DIRECTION('',(0.966234166155,0.257665550968,0.)); +#237794 = ORIENTED_EDGE('',*,*,#237795,.T.); +#237795 = EDGE_CURVE('',#237788,#237796,#237798,.T.); +#237796 = VERTEX_POINT('',#237797); +#237797 = CARTESIAN_POINT('',(134.744542,-52.206088,1.585)); +#237798 = LINE('',#237799,#237800); +#237799 = CARTESIAN_POINT('',(135.393951,-52.360708,1.585)); +#237800 = VECTOR('',#237801,1.); +#237801 = DIRECTION('',(-0.972806616505,0.231618839659,0.)); +#237802 = ORIENTED_EDGE('',*,*,#237803,.T.); +#237803 = EDGE_CURVE('',#237796,#237804,#237806,.T.); +#237804 = VERTEX_POINT('',#237805); +#237805 = CARTESIAN_POINT('',(134.72149,-52.195514,1.585)); +#237806 = LINE('',#237807,#237808); +#237807 = CARTESIAN_POINT('',(134.744542,-52.206088,1.585)); +#237808 = VECTOR('',#237809,1.); +#237809 = DIRECTION('',(-0.908937835688,0.416931662093,0.)); +#237810 = ORIENTED_EDGE('',*,*,#237811,.T.); +#237811 = EDGE_CURVE('',#237804,#237693,#237812,.T.); +#237812 = LINE('',#237813,#237814); +#237813 = CARTESIAN_POINT('',(134.72149,-52.195514,1.585)); +#237814 = VECTOR('',#237815,1.); +#237815 = DIRECTION('',(-0.524085089139,0.851665908289,0.)); +#237816 = PLANE('',#237817); +#237817 = AXIS2_PLACEMENT_3D('',#237818,#237819,#237820); +#237818 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237819 = DIRECTION('',(0.,0.,1.)); +#237820 = DIRECTION('',(1.,0.,-0.)); +#237821 = SHELL_BASED_SURFACE_MODEL('',(#237822)); +#237822 = OPEN_SHELL('',(#237823)); +#237823 = ADVANCED_FACE('',(#237824),#237901,.T.); +#237824 = FACE_BOUND('',#237825,.F.); +#237825 = EDGE_LOOP('',(#237826,#237837,#237845,#237853,#237862,#237870, + #237878,#237887,#237895)); +#237826 = ORIENTED_EDGE('',*,*,#237827,.T.); +#237827 = EDGE_CURVE('',#237828,#237830,#237832,.T.); +#237828 = VERTEX_POINT('',#237829); +#237829 = CARTESIAN_POINT('',(121.849545,-52.282268,1.585)); +#237830 = VERTEX_POINT('',#237831); +#237831 = CARTESIAN_POINT('',(121.974597,-52.307142,1.585)); +#237832 = CIRCLE('',#237833,6.499988811648E-02); +#237833 = AXIS2_PLACEMENT_3D('',#237834,#237835,#237836); +#237834 = CARTESIAN_POINT('',(121.90959711188,-52.3071422701,1.585)); +#237835 = DIRECTION('',(0.,0.,-1.)); +#237836 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#237837 = ORIENTED_EDGE('',*,*,#237838,.T.); +#237838 = EDGE_CURVE('',#237830,#237839,#237841,.T.); +#237839 = VERTEX_POINT('',#237840); +#237840 = CARTESIAN_POINT('',(121.974597,-52.499284,1.585)); +#237841 = LINE('',#237842,#237843); +#237842 = CARTESIAN_POINT('',(121.974597,-52.307142,1.585)); +#237843 = VECTOR('',#237844,1.); +#237844 = DIRECTION('',(0.,-1.,0.)); +#237845 = ORIENTED_EDGE('',*,*,#237846,.T.); +#237846 = EDGE_CURVE('',#237839,#237847,#237849,.T.); +#237847 = VERTEX_POINT('',#237848); +#237848 = CARTESIAN_POINT('',(122.809597,-52.499284,1.585)); +#237849 = LINE('',#237850,#237851); +#237850 = CARTESIAN_POINT('',(121.974597,-52.499284,1.585)); +#237851 = VECTOR('',#237852,1.); +#237852 = DIRECTION('',(1.,0.,0.)); +#237853 = ORIENTED_EDGE('',*,*,#237854,.T.); +#237854 = EDGE_CURVE('',#237847,#237855,#237857,.T.); +#237855 = VERTEX_POINT('',#237856); +#237856 = CARTESIAN_POINT('',(122.809597,-52.629284,1.585)); +#237857 = CIRCLE('',#237858,6.500000000091E-02); +#237858 = AXIS2_PLACEMENT_3D('',#237859,#237860,#237861); +#237859 = CARTESIAN_POINT('',(122.80959665513,-52.564284,1.585)); +#237860 = DIRECTION('',(0.,0.,-1.)); +#237861 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#237862 = ORIENTED_EDGE('',*,*,#237863,.T.); +#237863 = EDGE_CURVE('',#237855,#237864,#237866,.T.); +#237864 = VERTEX_POINT('',#237865); +#237865 = CARTESIAN_POINT('',(121.974597,-52.629284,1.585)); +#237866 = LINE('',#237867,#237868); +#237867 = CARTESIAN_POINT('',(122.809597,-52.629284,1.585)); +#237868 = VECTOR('',#237869,1.); +#237869 = DIRECTION('',(-1.,0.,0.)); +#237870 = ORIENTED_EDGE('',*,*,#237871,.T.); +#237871 = EDGE_CURVE('',#237864,#237872,#237874,.T.); +#237872 = VERTEX_POINT('',#237873); +#237873 = CARTESIAN_POINT('',(121.974597,-52.821427,1.585)); +#237874 = LINE('',#237875,#237876); +#237875 = CARTESIAN_POINT('',(121.974597,-52.629284,1.585)); +#237876 = VECTOR('',#237877,1.); +#237877 = DIRECTION('',(0.,-1.,0.)); +#237878 = ORIENTED_EDGE('',*,*,#237879,.T.); +#237879 = EDGE_CURVE('',#237872,#237880,#237882,.T.); +#237880 = VERTEX_POINT('',#237881); +#237881 = CARTESIAN_POINT('',(121.844597,-52.821427,1.585)); +#237882 = CIRCLE('',#237883,6.500000000092E-02); +#237883 = AXIS2_PLACEMENT_3D('',#237884,#237885,#237886); +#237884 = CARTESIAN_POINT('',(121.909597,-52.82142665513,1.585)); +#237885 = DIRECTION('',(-0.,0.,-1.)); +#237886 = DIRECTION('',(0.999999999986,-5.305658244296E-06,-0.)); +#237887 = ORIENTED_EDGE('',*,*,#237888,.T.); +#237888 = EDGE_CURVE('',#237880,#237889,#237891,.T.); +#237889 = VERTEX_POINT('',#237890); +#237890 = CARTESIAN_POINT('',(121.844597,-52.307142,1.585)); +#237891 = LINE('',#237892,#237893); +#237892 = CARTESIAN_POINT('',(121.844597,-52.821427,1.585)); +#237893 = VECTOR('',#237894,1.); +#237894 = DIRECTION('',(0.,1.,0.)); +#237895 = ORIENTED_EDGE('',*,*,#237896,.T.); +#237896 = EDGE_CURVE('',#237889,#237828,#237897,.T.); +#237897 = LINE('',#237898,#237899); +#237898 = CARTESIAN_POINT('',(121.844597,-52.307142,1.585)); +#237899 = VECTOR('',#237900,1.); +#237900 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#237901 = PLANE('',#237902); +#237902 = AXIS2_PLACEMENT_3D('',#237903,#237904,#237905); +#237903 = CARTESIAN_POINT('',(0.,0.,1.585)); +#237904 = DIRECTION('',(0.,0.,1.)); +#237905 = DIRECTION('',(1.,0.,-0.)); +#237906 = SHELL_BASED_SURFACE_MODEL('',(#237907)); +#237907 = OPEN_SHELL('',(#237908)); +#237908 = ADVANCED_FACE('',(#237909,#237979),#238013,.T.); +#237909 = FACE_BOUND('',#237910,.F.); +#237910 = EDGE_LOOP('',(#237911,#237922,#237930,#237939,#237947,#237956, + #237964,#237973)); +#237911 = ORIENTED_EDGE('',*,*,#237912,.T.); +#237912 = EDGE_CURVE('',#237913,#237915,#237917,.T.); +#237913 = VERTEX_POINT('',#237914); +#237914 = CARTESIAN_POINT('',(109.75165,-47.5931,1.585)); +#237915 = VERTEX_POINT('',#237916); +#237916 = CARTESIAN_POINT('',(109.81165,-47.5331,1.585)); +#237917 = CIRCLE('',#237918,5.999932016262E-02); +#237918 = AXIS2_PLACEMENT_3D('',#237919,#237920,#237921); +#237919 = CARTESIAN_POINT('',(109.81164932015,-47.59309932015,1.585)); +#237920 = DIRECTION('',(0.,0.,-1.)); +#237921 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#237922 = ORIENTED_EDGE('',*,*,#237923,.T.); +#237923 = EDGE_CURVE('',#237915,#237924,#237926,.T.); +#237924 = VERTEX_POINT('',#237925); +#237925 = CARTESIAN_POINT('',(112.57165,-47.5331,1.585)); +#237926 = LINE('',#237927,#237928); +#237927 = CARTESIAN_POINT('',(109.81165,-47.5331,1.585)); +#237928 = VECTOR('',#237929,1.); +#237929 = DIRECTION('',(1.,0.,0.)); +#237930 = ORIENTED_EDGE('',*,*,#237931,.T.); +#237931 = EDGE_CURVE('',#237924,#237932,#237934,.T.); +#237932 = VERTEX_POINT('',#237933); +#237933 = CARTESIAN_POINT('',(112.63165,-47.5931,1.585)); +#237934 = CIRCLE('',#237935,5.999932016258E-02); +#237935 = AXIS2_PLACEMENT_3D('',#237936,#237937,#237938); +#237936 = CARTESIAN_POINT('',(112.57165067984,-47.59309932015,1.585)); +#237937 = DIRECTION('',(0.,0.,-1.)); +#237938 = DIRECTION('',(-1.133081588458E-05,0.999999999936,0.)); +#237939 = ORIENTED_EDGE('',*,*,#237940,.T.); +#237940 = EDGE_CURVE('',#237932,#237941,#237943,.T.); +#237941 = VERTEX_POINT('',#237942); +#237942 = CARTESIAN_POINT('',(112.63165,-52.7831,1.585)); +#237943 = LINE('',#237944,#237945); +#237944 = CARTESIAN_POINT('',(112.63165,-47.5931,1.585)); +#237945 = VECTOR('',#237946,1.); +#237946 = DIRECTION('',(0.,-1.,0.)); +#237947 = ORIENTED_EDGE('',*,*,#237948,.T.); +#237948 = EDGE_CURVE('',#237941,#237949,#237951,.T.); +#237949 = VERTEX_POINT('',#237950); +#237950 = CARTESIAN_POINT('',(112.57165,-52.8431,1.585)); +#237951 = CIRCLE('',#237952,5.999932016259E-02); +#237952 = AXIS2_PLACEMENT_3D('',#237953,#237954,#237955); +#237953 = CARTESIAN_POINT('',(112.57165067984,-52.78310067984,1.585)); +#237954 = DIRECTION('',(0.,0.,-1.)); +#237955 = DIRECTION('',(0.999999999936,1.133081612143E-05,0.)); +#237956 = ORIENTED_EDGE('',*,*,#237957,.T.); +#237957 = EDGE_CURVE('',#237949,#237958,#237960,.T.); +#237958 = VERTEX_POINT('',#237959); +#237959 = CARTESIAN_POINT('',(109.81165,-52.8431,1.585)); +#237960 = LINE('',#237961,#237962); +#237961 = CARTESIAN_POINT('',(112.57165,-52.8431,1.585)); +#237962 = VECTOR('',#237963,1.); +#237963 = DIRECTION('',(-1.,0.,0.)); +#237964 = ORIENTED_EDGE('',*,*,#237965,.T.); +#237965 = EDGE_CURVE('',#237958,#237966,#237968,.T.); +#237966 = VERTEX_POINT('',#237967); +#237967 = CARTESIAN_POINT('',(109.75165,-52.7831,1.585)); +#237968 = CIRCLE('',#237969,5.999932016261E-02); +#237969 = AXIS2_PLACEMENT_3D('',#237970,#237971,#237972); +#237970 = CARTESIAN_POINT('',(109.81164932015,-52.78310067984,1.585)); +#237971 = DIRECTION('',(0.,0.,-1.)); +#237972 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#237973 = ORIENTED_EDGE('',*,*,#237974,.T.); +#237974 = EDGE_CURVE('',#237966,#237913,#237975,.T.); +#237975 = LINE('',#237976,#237977); +#237976 = CARTESIAN_POINT('',(109.75165,-52.7831,1.585)); +#237977 = VECTOR('',#237978,1.); +#237978 = DIRECTION('',(0.,1.,0.)); +#237979 = FACE_BOUND('',#237980,.F.); +#237980 = EDGE_LOOP('',(#237981,#237991,#237999,#238007)); +#237981 = ORIENTED_EDGE('',*,*,#237982,.T.); +#237982 = EDGE_CURVE('',#237983,#237985,#237987,.T.); +#237983 = VERTEX_POINT('',#237984); +#237984 = CARTESIAN_POINT('',(112.51165,-52.7231,1.585)); +#237985 = VERTEX_POINT('',#237986); +#237986 = CARTESIAN_POINT('',(112.51165,-47.6531,1.585)); +#237987 = LINE('',#237988,#237989); +#237988 = CARTESIAN_POINT('',(112.51165,-52.7231,1.585)); +#237989 = VECTOR('',#237990,1.); +#237990 = DIRECTION('',(0.,1.,0.)); +#237991 = ORIENTED_EDGE('',*,*,#237992,.T.); +#237992 = EDGE_CURVE('',#237985,#237993,#237995,.T.); +#237993 = VERTEX_POINT('',#237994); +#237994 = CARTESIAN_POINT('',(109.87165,-47.6531,1.585)); +#237995 = LINE('',#237996,#237997); +#237996 = CARTESIAN_POINT('',(112.51165,-47.6531,1.585)); +#237997 = VECTOR('',#237998,1.); +#237998 = DIRECTION('',(-1.,0.,0.)); +#237999 = ORIENTED_EDGE('',*,*,#238000,.T.); +#238000 = EDGE_CURVE('',#237993,#238001,#238003,.T.); +#238001 = VERTEX_POINT('',#238002); +#238002 = CARTESIAN_POINT('',(109.87165,-52.7231,1.585)); +#238003 = LINE('',#238004,#238005); +#238004 = CARTESIAN_POINT('',(109.87165,-47.6531,1.585)); +#238005 = VECTOR('',#238006,1.); +#238006 = DIRECTION('',(0.,-1.,0.)); +#238007 = ORIENTED_EDGE('',*,*,#238008,.T.); +#238008 = EDGE_CURVE('',#238001,#237983,#238009,.T.); +#238009 = LINE('',#238010,#238011); +#238010 = CARTESIAN_POINT('',(109.87165,-52.7231,1.585)); +#238011 = VECTOR('',#238012,1.); +#238012 = DIRECTION('',(1.,0.,0.)); +#238013 = PLANE('',#238014); +#238014 = AXIS2_PLACEMENT_3D('',#238015,#238016,#238017); +#238015 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238016 = DIRECTION('',(0.,0.,1.)); +#238017 = DIRECTION('',(1.,0.,-0.)); +#238018 = SHELL_BASED_SURFACE_MODEL('',(#238019)); +#238019 = OPEN_SHELL('',(#238020)); +#238020 = ADVANCED_FACE('',(#238021),#238107,.T.); +#238021 = FACE_BOUND('',#238022,.F.); +#238022 = EDGE_LOOP('',(#238023,#238034,#238042,#238051,#238059,#238067, + #238076,#238084,#238093,#238101)); +#238023 = ORIENTED_EDGE('',*,*,#238024,.T.); +#238024 = EDGE_CURVE('',#238025,#238027,#238029,.T.); +#238025 = VERTEX_POINT('',#238026); +#238026 = CARTESIAN_POINT('',(119.409597,-52.307856,1.585)); +#238027 = VERTEX_POINT('',#238028); +#238028 = CARTESIAN_POINT('',(119.409597,-52.177856,1.585)); +#238029 = CIRCLE('',#238030,6.500000000091E-02); +#238030 = AXIS2_PLACEMENT_3D('',#238031,#238032,#238033); +#238031 = CARTESIAN_POINT('',(119.40959734486,-52.242856,1.585)); +#238032 = DIRECTION('',(0.,0.,-1.)); +#238033 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#238034 = ORIENTED_EDGE('',*,*,#238035,.T.); +#238035 = EDGE_CURVE('',#238027,#238036,#238038,.T.); +#238036 = VERTEX_POINT('',#238037); +#238037 = CARTESIAN_POINT('',(120.309597,-52.177856,1.585)); +#238038 = LINE('',#238039,#238040); +#238039 = CARTESIAN_POINT('',(119.409597,-52.177856,1.585)); +#238040 = VECTOR('',#238041,1.); +#238041 = DIRECTION('',(1.,0.,0.)); +#238042 = ORIENTED_EDGE('',*,*,#238043,.T.); +#238043 = EDGE_CURVE('',#238036,#238044,#238046,.T.); +#238044 = VERTEX_POINT('',#238045); +#238045 = CARTESIAN_POINT('',(120.341846,-52.299292,1.585)); +#238046 = CIRCLE('',#238047,6.500021194142E-02); +#238047 = AXIS2_PLACEMENT_3D('',#238048,#238049,#238050); +#238048 = CARTESIAN_POINT('',(120.30959651351,-52.24285621194,1.585)); +#238049 = DIRECTION('',(0.,0.,-1.)); +#238050 = DIRECTION('',(7.484332334091E-06,0.999999999972,0.)); +#238051 = ORIENTED_EDGE('',*,*,#238052,.T.); +#238052 = EDGE_CURVE('',#238044,#238053,#238055,.T.); +#238053 = VERTEX_POINT('',#238054); +#238054 = CARTESIAN_POINT('',(119.654359,-52.692142,1.585)); +#238055 = LINE('',#238056,#238057); +#238056 = CARTESIAN_POINT('',(120.341846,-52.299292,1.585)); +#238057 = VECTOR('',#238058,1.); +#238058 = DIRECTION('',(-0.868242986688,-0.496139210371,0.)); +#238059 = ORIENTED_EDGE('',*,*,#238060,.T.); +#238060 = EDGE_CURVE('',#238053,#238061,#238063,.T.); +#238061 = VERTEX_POINT('',#238062); +#238062 = CARTESIAN_POINT('',(120.309597,-52.692142,1.585)); +#238063 = LINE('',#238064,#238065); +#238064 = CARTESIAN_POINT('',(119.654359,-52.692142,1.585)); +#238065 = VECTOR('',#238066,1.); +#238066 = DIRECTION('',(1.,0.,0.)); +#238067 = ORIENTED_EDGE('',*,*,#238068,.T.); +#238068 = EDGE_CURVE('',#238061,#238069,#238071,.T.); +#238069 = VERTEX_POINT('',#238070); +#238070 = CARTESIAN_POINT('',(120.309597,-52.822142,1.585)); +#238071 = CIRCLE('',#238072,6.500000000092E-02); +#238072 = AXIS2_PLACEMENT_3D('',#238073,#238074,#238075); +#238073 = CARTESIAN_POINT('',(120.30959665513,-52.757142,1.585)); +#238074 = DIRECTION('',(0.,0.,-1.)); +#238075 = DIRECTION('',(5.305658244297E-06,0.999999999986,0.)); +#238076 = ORIENTED_EDGE('',*,*,#238077,.T.); +#238077 = EDGE_CURVE('',#238069,#238078,#238080,.T.); +#238078 = VERTEX_POINT('',#238079); +#238079 = CARTESIAN_POINT('',(119.409597,-52.822142,1.585)); +#238080 = LINE('',#238081,#238082); +#238081 = CARTESIAN_POINT('',(120.309597,-52.822142,1.585)); +#238082 = VECTOR('',#238083,1.); +#238083 = DIRECTION('',(-1.,0.,0.)); +#238084 = ORIENTED_EDGE('',*,*,#238085,.T.); +#238085 = EDGE_CURVE('',#238078,#238086,#238088,.T.); +#238086 = VERTEX_POINT('',#238087); +#238087 = CARTESIAN_POINT('',(119.377348,-52.700706,1.585)); +#238088 = CIRCLE('',#238089,6.500021194142E-02); +#238089 = AXIS2_PLACEMENT_3D('',#238090,#238091,#238092); +#238090 = CARTESIAN_POINT('',(119.40959748648,-52.75714178806,1.585)); +#238091 = DIRECTION('',(0.,0.,-1.)); +#238092 = DIRECTION('',(-7.48433233409E-06,-0.999999999972,-0.)); +#238093 = ORIENTED_EDGE('',*,*,#238094,.T.); +#238094 = EDGE_CURVE('',#238086,#238095,#238097,.T.); +#238095 = VERTEX_POINT('',#238096); +#238096 = CARTESIAN_POINT('',(120.064835,-52.307856,1.585)); +#238097 = LINE('',#238098,#238099); +#238098 = CARTESIAN_POINT('',(119.377348,-52.700706,1.585)); +#238099 = VECTOR('',#238100,1.); +#238100 = DIRECTION('',(0.868242986688,0.496139210371,0.)); +#238101 = ORIENTED_EDGE('',*,*,#238102,.T.); +#238102 = EDGE_CURVE('',#238095,#238025,#238103,.T.); +#238103 = LINE('',#238104,#238105); +#238104 = CARTESIAN_POINT('',(120.064835,-52.307856,1.585)); +#238105 = VECTOR('',#238106,1.); +#238106 = DIRECTION('',(-1.,0.,0.)); +#238107 = PLANE('',#238108); +#238108 = AXIS2_PLACEMENT_3D('',#238109,#238110,#238111); +#238109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238110 = DIRECTION('',(0.,0.,1.)); +#238111 = DIRECTION('',(1.,0.,-0.)); +#238112 = SHELL_BASED_SURFACE_MODEL('',(#238113)); +#238113 = OPEN_SHELL('',(#238114)); +#238114 = ADVANCED_FACE('',(#238115),#238387,.T.); +#238115 = FACE_BOUND('',#238116,.F.); +#238116 = EDGE_LOOP('',(#238117,#238128,#238136,#238144,#238153,#238161, + #238169,#238177,#238185,#238193,#238201,#238209,#238218,#238226, + #238234,#238242,#238250,#238258,#238267,#238275,#238283,#238292, + #238300,#238308,#238316,#238324,#238332,#238340,#238348,#238357, + #238365,#238373,#238381)); +#238117 = ORIENTED_EDGE('',*,*,#238118,.T.); +#238118 = EDGE_CURVE('',#238119,#238121,#238123,.T.); +#238119 = VERTEX_POINT('',#238120); +#238120 = CARTESIAN_POINT('',(129.54079,-52.208015,1.585)); +#238121 = VERTEX_POINT('',#238122); +#238122 = CARTESIAN_POINT('',(129.664119,-52.249124,1.585)); +#238123 = CIRCLE('',#238124,6.499998485139E-02); +#238124 = AXIS2_PLACEMENT_3D('',#238125,#238126,#238127); +#238125 = CARTESIAN_POINT('',(129.60245436584,-52.22856990248,1.585)); +#238126 = DIRECTION('',(0.,0.,-1.)); +#238127 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#238128 = ORIENTED_EDGE('',*,*,#238129,.T.); +#238129 = EDGE_CURVE('',#238121,#238130,#238132,.T.); +#238130 = VERTEX_POINT('',#238131); +#238131 = CARTESIAN_POINT('',(129.624597,-52.367689,1.585)); +#238132 = LINE('',#238133,#238134); +#238133 = CARTESIAN_POINT('',(129.664119,-52.249124,1.585)); +#238134 = VECTOR('',#238135,1.); +#238135 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#238136 = ORIENTED_EDGE('',*,*,#238137,.T.); +#238137 = EDGE_CURVE('',#238130,#238138,#238140,.T.); +#238138 = VERTEX_POINT('',#238139); +#238139 = CARTESIAN_POINT('',(129.624597,-52.556082,1.585)); +#238140 = LINE('',#238141,#238142); +#238141 = CARTESIAN_POINT('',(129.624597,-52.367689,1.585)); +#238142 = VECTOR('',#238143,1.); +#238143 = DIRECTION('',(0.,-1.,0.)); +#238144 = ORIENTED_EDGE('',*,*,#238145,.T.); +#238145 = EDGE_CURVE('',#238138,#238146,#238148,.T.); +#238146 = VERTEX_POINT('',#238147); +#238147 = CARTESIAN_POINT('',(129.74637,-52.677856,1.585)); +#238148 = CIRCLE('',#238149,0.170995888391); +#238149 = AXIS2_PLACEMENT_3D('',#238150,#238151,#238152); +#238150 = CARTESIAN_POINT('',(129.7899473225,-52.51250603534,1.585)); +#238151 = DIRECTION('',(0.,0.,1.)); +#238152 = DIRECTION('',(-0.966984200949,-0.254836330051,0.)); +#238153 = ORIENTED_EDGE('',*,*,#238154,.T.); +#238154 = EDGE_CURVE('',#238146,#238155,#238157,.T.); +#238155 = VERTEX_POINT('',#238156); +#238156 = CARTESIAN_POINT('',(129.801395,-52.677856,1.585)); +#238157 = LINE('',#238158,#238159); +#238158 = CARTESIAN_POINT('',(129.74637,-52.677856,1.585)); +#238159 = VECTOR('',#238160,1.); +#238160 = DIRECTION('',(1.,0.,0.)); +#238161 = ORIENTED_EDGE('',*,*,#238162,.T.); +#238162 = EDGE_CURVE('',#238155,#238163,#238165,.T.); +#238163 = VERTEX_POINT('',#238164); +#238164 = CARTESIAN_POINT('',(129.863951,-52.646578,1.585)); +#238165 = LINE('',#238166,#238167); +#238166 = CARTESIAN_POINT('',(129.801395,-52.677856,1.585)); +#238167 = VECTOR('',#238168,1.); +#238168 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#238169 = ORIENTED_EDGE('',*,*,#238170,.T.); +#238170 = EDGE_CURVE('',#238163,#238171,#238173,.T.); +#238171 = VERTEX_POINT('',#238172); +#238172 = CARTESIAN_POINT('',(129.891889,-52.618639,1.585)); +#238173 = LINE('',#238174,#238175); +#238174 = CARTESIAN_POINT('',(129.863951,-52.646578,1.585)); +#238175 = VECTOR('',#238176,1.); +#238176 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#238177 = ORIENTED_EDGE('',*,*,#238178,.T.); +#238178 = EDGE_CURVE('',#238171,#238179,#238181,.T.); +#238179 = VERTEX_POINT('',#238180); +#238180 = CARTESIAN_POINT('',(129.926839,-52.548738,1.585)); +#238181 = LINE('',#238182,#238183); +#238182 = CARTESIAN_POINT('',(129.891889,-52.618639,1.585)); +#238183 = VECTOR('',#238184,1.); +#238184 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#238185 = ORIENTED_EDGE('',*,*,#238186,.T.); +#238186 = EDGE_CURVE('',#238179,#238187,#238189,.T.); +#238187 = VERTEX_POINT('',#238188); +#238188 = CARTESIAN_POINT('',(129.972887,-52.37093,1.585)); +#238189 = LINE('',#238190,#238191); +#238190 = CARTESIAN_POINT('',(129.926839,-52.548738,1.585)); +#238191 = VECTOR('',#238192,1.); +#238192 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#238193 = ORIENTED_EDGE('',*,*,#238194,.T.); +#238194 = EDGE_CURVE('',#238187,#238195,#238197,.T.); +#238195 = VERTEX_POINT('',#238196); +#238196 = CARTESIAN_POINT('',(130.02792,-52.268323,1.585)); +#238197 = LINE('',#238198,#238199); +#238198 = CARTESIAN_POINT('',(129.972887,-52.37093,1.585)); +#238199 = VECTOR('',#238200,1.); +#238200 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#238201 = ORIENTED_EDGE('',*,*,#238202,.T.); +#238202 = EDGE_CURVE('',#238195,#238203,#238205,.T.); +#238203 = VERTEX_POINT('',#238204); +#238204 = CARTESIAN_POINT('',(130.087671,-52.213289,1.585)); +#238205 = LINE('',#238206,#238207); +#238206 = CARTESIAN_POINT('',(130.02792,-52.268323,1.585)); +#238207 = VECTOR('',#238208,1.); +#238208 = DIRECTION('',(0.735543975152,0.677476981615,0.)); +#238209 = ORIENTED_EDGE('',*,*,#238210,.T.); +#238210 = EDGE_CURVE('',#238203,#238211,#238213,.T.); +#238211 = VERTEX_POINT('',#238212); +#238212 = CARTESIAN_POINT('',(130.317237,-52.170432,1.585)); +#238213 = CIRCLE('',#238214,0.258971949836); +#238214 = AXIS2_PLACEMENT_3D('',#238215,#238216,#238217); +#238215 = CARTESIAN_POINT('',(130.24487456064,-52.41908868736,1.585)); +#238216 = DIRECTION('',(0.,0.,-1.)); +#238217 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#238218 = ORIENTED_EDGE('',*,*,#238219,.T.); +#238219 = EDGE_CURVE('',#238211,#238220,#238222,.T.); +#238220 = VERTEX_POINT('',#238221); +#238221 = CARTESIAN_POINT('',(130.419844,-52.225465,1.585)); +#238222 = LINE('',#238223,#238224); +#238223 = CARTESIAN_POINT('',(130.317237,-52.170432,1.585)); +#238224 = VECTOR('',#238225,1.); +#238225 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#238226 = ORIENTED_EDGE('',*,*,#238227,.T.); +#238227 = EDGE_CURVE('',#238220,#238228,#238230,.T.); +#238228 = VERTEX_POINT('',#238229); +#238229 = CARTESIAN_POINT('',(130.474878,-52.285216,1.585)); +#238230 = LINE('',#238231,#238232); +#238231 = CARTESIAN_POINT('',(130.419844,-52.225465,1.585)); +#238232 = VECTOR('',#238233,1.); +#238233 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#238234 = ORIENTED_EDGE('',*,*,#238235,.T.); +#238235 = EDGE_CURVE('',#238228,#238236,#238238,.T.); +#238236 = VERTEX_POINT('',#238237); +#238237 = CARTESIAN_POINT('',(130.521681,-52.385342,1.585)); +#238238 = LINE('',#238239,#238240); +#238239 = CARTESIAN_POINT('',(130.474878,-52.285216,1.585)); +#238240 = VECTOR('',#238241,1.); +#238241 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#238242 = ORIENTED_EDGE('',*,*,#238243,.T.); +#238243 = EDGE_CURVE('',#238236,#238244,#238246,.T.); +#238244 = VERTEX_POINT('',#238245); +#238245 = CARTESIAN_POINT('',(130.522563,-52.624507,1.585)); +#238246 = LINE('',#238247,#238248); +#238247 = CARTESIAN_POINT('',(130.521681,-52.385342,1.585)); +#238248 = VECTOR('',#238249,1.); +#238249 = DIRECTION('',(3.687805500009E-03,-0.999993200022,0.)); +#238250 = ORIENTED_EDGE('',*,*,#238251,.T.); +#238251 = EDGE_CURVE('',#238244,#238252,#238254,.T.); +#238252 = VERTEX_POINT('',#238253); +#238253 = CARTESIAN_POINT('',(130.478404,-52.763411,1.585)); +#238254 = LINE('',#238255,#238256); +#238255 = CARTESIAN_POINT('',(130.522563,-52.624507,1.585)); +#238256 = VECTOR('',#238257,1.); +#238257 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#238258 = ORIENTED_EDGE('',*,*,#238259,.T.); +#238259 = EDGE_CURVE('',#238252,#238260,#238262,.T.); +#238260 = VERTEX_POINT('',#238261); +#238261 = CARTESIAN_POINT('',(130.355076,-52.722301,1.585)); +#238262 = CIRCLE('',#238263,6.499966862259E-02); +#238263 = AXIS2_PLACEMENT_3D('',#238264,#238265,#238266); +#238264 = CARTESIAN_POINT('',(130.41674006734,-52.74285579797,1.585)); +#238265 = DIRECTION('',(-0.,0.,-1.)); +#238266 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#238267 = ORIENTED_EDGE('',*,*,#238268,.T.); +#238268 = EDGE_CURVE('',#238260,#238269,#238271,.T.); +#238269 = VERTEX_POINT('',#238270); +#238270 = CARTESIAN_POINT('',(130.394597,-52.603738,1.585)); +#238271 = LINE('',#238272,#238273); +#238272 = CARTESIAN_POINT('',(130.355076,-52.722301,1.585)); +#238273 = VECTOR('',#238274,1.); +#238274 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#238275 = ORIENTED_EDGE('',*,*,#238276,.T.); +#238276 = EDGE_CURVE('',#238269,#238277,#238279,.T.); +#238277 = VERTEX_POINT('',#238278); +#238278 = CARTESIAN_POINT('',(130.394597,-52.415344,1.585)); +#238279 = LINE('',#238280,#238281); +#238280 = CARTESIAN_POINT('',(130.394597,-52.603738,1.585)); +#238281 = VECTOR('',#238282,1.); +#238282 = DIRECTION('',(0.,1.,0.)); +#238283 = ORIENTED_EDGE('',*,*,#238284,.T.); +#238284 = EDGE_CURVE('',#238277,#238285,#238287,.T.); +#238285 = VERTEX_POINT('',#238286); +#238286 = CARTESIAN_POINT('',(130.272823,-52.29357,1.585)); +#238287 = CIRCLE('',#238288,0.170999251022); +#238288 = AXIS2_PLACEMENT_3D('',#238289,#238290,#238291); +#238289 = CARTESIAN_POINT('',(130.229244,-52.458923,1.585)); +#238290 = DIRECTION('',(0.,0.,1.)); +#238291 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#238292 = ORIENTED_EDGE('',*,*,#238293,.T.); +#238293 = EDGE_CURVE('',#238285,#238294,#238296,.T.); +#238294 = VERTEX_POINT('',#238295); +#238295 = CARTESIAN_POINT('',(130.217799,-52.29357,1.585)); +#238296 = LINE('',#238297,#238298); +#238297 = CARTESIAN_POINT('',(130.272823,-52.29357,1.585)); +#238298 = VECTOR('',#238299,1.); +#238299 = DIRECTION('',(-1.,0.,0.)); +#238300 = ORIENTED_EDGE('',*,*,#238301,.T.); +#238301 = EDGE_CURVE('',#238294,#238302,#238304,.T.); +#238302 = VERTEX_POINT('',#238303); +#238303 = CARTESIAN_POINT('',(130.155243,-52.324848,1.585)); +#238304 = LINE('',#238305,#238306); +#238305 = CARTESIAN_POINT('',(130.217799,-52.29357,1.585)); +#238306 = VECTOR('',#238307,1.); +#238307 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#238308 = ORIENTED_EDGE('',*,*,#238309,.T.); +#238309 = EDGE_CURVE('',#238302,#238310,#238312,.T.); +#238310 = VERTEX_POINT('',#238311); +#238311 = CARTESIAN_POINT('',(130.127303,-52.352788,1.585)); +#238312 = LINE('',#238313,#238314); +#238313 = CARTESIAN_POINT('',(130.155243,-52.324848,1.585)); +#238314 = VECTOR('',#238315,1.); +#238315 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#238316 = ORIENTED_EDGE('',*,*,#238317,.T.); +#238317 = EDGE_CURVE('',#238310,#238318,#238320,.T.); +#238318 = VERTEX_POINT('',#238319); +#238319 = CARTESIAN_POINT('',(130.092353,-52.422688,1.585)); +#238320 = LINE('',#238321,#238322); +#238321 = CARTESIAN_POINT('',(130.127303,-52.352788,1.585)); +#238322 = VECTOR('',#238323,1.); +#238323 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#238324 = ORIENTED_EDGE('',*,*,#238325,.T.); +#238325 = EDGE_CURVE('',#238318,#238326,#238328,.T.); +#238326 = VERTEX_POINT('',#238327); +#238327 = CARTESIAN_POINT('',(130.046306,-52.600496,1.585)); +#238328 = LINE('',#238329,#238330); +#238329 = CARTESIAN_POINT('',(130.092353,-52.422688,1.585)); +#238330 = VECTOR('',#238331,1.); +#238331 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#238332 = ORIENTED_EDGE('',*,*,#238333,.T.); +#238333 = EDGE_CURVE('',#238326,#238334,#238336,.T.); +#238334 = VERTEX_POINT('',#238335); +#238335 = CARTESIAN_POINT('',(129.991273,-52.703104,1.585)); +#238336 = LINE('',#238337,#238338); +#238337 = CARTESIAN_POINT('',(130.046306,-52.600496,1.585)); +#238338 = VECTOR('',#238339,1.); +#238339 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#238340 = ORIENTED_EDGE('',*,*,#238341,.T.); +#238341 = EDGE_CURVE('',#238334,#238342,#238344,.T.); +#238342 = VERTEX_POINT('',#238343); +#238343 = CARTESIAN_POINT('',(129.931523,-52.758137,1.585)); +#238344 = LINE('',#238345,#238346); +#238345 = CARTESIAN_POINT('',(129.991273,-52.703104,1.585)); +#238346 = VECTOR('',#238347,1.); +#238347 = DIRECTION('',(-0.73554445943,-0.677476455829,0.)); +#238348 = ORIENTED_EDGE('',*,*,#238349,.T.); +#238349 = EDGE_CURVE('',#238342,#238350,#238352,.T.); +#238350 = VERTEX_POINT('',#238351); +#238351 = CARTESIAN_POINT('',(129.608013,-52.75175,1.585)); +#238352 = CIRCLE('',#238353,0.260197694649); +#238353 = AXIS2_PLACEMENT_3D('',#238354,#238355,#238356); +#238354 = CARTESIAN_POINT('',(129.77379048924,-52.55119909783,1.585)); +#238355 = DIRECTION('',(-0.,0.,-1.)); +#238356 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#238357 = ORIENTED_EDGE('',*,*,#238358,.T.); +#238358 = EDGE_CURVE('',#238350,#238359,#238361,.T.); +#238359 = VERTEX_POINT('',#238360); +#238360 = CARTESIAN_POINT('',(129.550702,-52.694439,1.585)); +#238361 = LINE('',#238362,#238363); +#238362 = CARTESIAN_POINT('',(129.608013,-52.75175,1.585)); +#238363 = VECTOR('',#238364,1.); +#238364 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#238365 = ORIENTED_EDGE('',*,*,#238366,.T.); +#238366 = EDGE_CURVE('',#238359,#238367,#238369,.T.); +#238367 = VERTEX_POINT('',#238368); +#238368 = CARTESIAN_POINT('',(129.497512,-52.586083,1.585)); +#238369 = LINE('',#238370,#238371); +#238370 = CARTESIAN_POINT('',(129.550702,-52.694439,1.585)); +#238371 = VECTOR('',#238372,1.); +#238372 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#238373 = ORIENTED_EDGE('',*,*,#238374,.T.); +#238374 = EDGE_CURVE('',#238367,#238375,#238377,.T.); +#238375 = VERTEX_POINT('',#238376); +#238376 = CARTESIAN_POINT('',(129.49663,-52.346919,1.585)); +#238377 = LINE('',#238378,#238379); +#238378 = CARTESIAN_POINT('',(129.497512,-52.586083,1.585)); +#238379 = VECTOR('',#238380,1.); +#238380 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#238381 = ORIENTED_EDGE('',*,*,#238382,.T.); +#238382 = EDGE_CURVE('',#238375,#238119,#238383,.T.); +#238383 = LINE('',#238384,#238385); +#238384 = CARTESIAN_POINT('',(129.49663,-52.346919,1.585)); +#238385 = VECTOR('',#238386,1.); +#238386 = DIRECTION('',(0.302974833624,0.952998557287,0.)); +#238387 = PLANE('',#238388); +#238388 = AXIS2_PLACEMENT_3D('',#238389,#238390,#238391); +#238389 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238390 = DIRECTION('',(0.,0.,1.)); +#238391 = DIRECTION('',(1.,0.,-0.)); +#238392 = SHELL_BASED_SURFACE_MODEL('',(#238393)); +#238393 = OPEN_SHELL('',(#238394)); +#238394 = ADVANCED_FACE('',(#238395),#238667,.T.); +#238395 = FACE_BOUND('',#238396,.F.); +#238396 = EDGE_LOOP('',(#238397,#238408,#238416,#238424,#238433,#238441, + #238449,#238457,#238465,#238473,#238481,#238489,#238498,#238506, + #238514,#238522,#238530,#238538,#238547,#238555,#238563,#238572, + #238580,#238588,#238596,#238604,#238612,#238620,#238628,#238637, + #238645,#238653,#238661)); +#238397 = ORIENTED_EDGE('',*,*,#238398,.T.); +#238398 = EDGE_CURVE('',#238399,#238401,#238403,.T.); +#238399 = VERTEX_POINT('',#238400); +#238400 = CARTESIAN_POINT('',(116.84079,-52.19373,1.585)); +#238401 = VERTEX_POINT('',#238402); +#238402 = CARTESIAN_POINT('',(116.964119,-52.234839,1.585)); +#238403 = CIRCLE('',#238404,6.499998485138E-02); +#238404 = AXIS2_PLACEMENT_3D('',#238405,#238406,#238407); +#238405 = CARTESIAN_POINT('',(116.90245436584,-52.21428490248,1.585)); +#238406 = DIRECTION('',(0.,0.,-1.)); +#238407 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#238408 = ORIENTED_EDGE('',*,*,#238409,.T.); +#238409 = EDGE_CURVE('',#238401,#238410,#238412,.T.); +#238410 = VERTEX_POINT('',#238411); +#238411 = CARTESIAN_POINT('',(116.924597,-52.353404,1.585)); +#238412 = LINE('',#238413,#238414); +#238413 = CARTESIAN_POINT('',(116.964119,-52.234839,1.585)); +#238414 = VECTOR('',#238415,1.); +#238415 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#238416 = ORIENTED_EDGE('',*,*,#238417,.T.); +#238417 = EDGE_CURVE('',#238410,#238418,#238420,.T.); +#238418 = VERTEX_POINT('',#238419); +#238419 = CARTESIAN_POINT('',(116.924597,-52.541797,1.585)); +#238420 = LINE('',#238421,#238422); +#238421 = CARTESIAN_POINT('',(116.924597,-52.353404,1.585)); +#238422 = VECTOR('',#238423,1.); +#238423 = DIRECTION('',(0.,-1.,0.)); +#238424 = ORIENTED_EDGE('',*,*,#238425,.T.); +#238425 = EDGE_CURVE('',#238418,#238426,#238428,.T.); +#238426 = VERTEX_POINT('',#238427); +#238427 = CARTESIAN_POINT('',(117.04637,-52.663571,1.585)); +#238428 = CIRCLE('',#238429,0.170995888391); +#238429 = AXIS2_PLACEMENT_3D('',#238430,#238431,#238432); +#238430 = CARTESIAN_POINT('',(117.0899473225,-52.49822103534,1.585)); +#238431 = DIRECTION('',(0.,0.,1.)); +#238432 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#238433 = ORIENTED_EDGE('',*,*,#238434,.T.); +#238434 = EDGE_CURVE('',#238426,#238435,#238437,.T.); +#238435 = VERTEX_POINT('',#238436); +#238436 = CARTESIAN_POINT('',(117.101395,-52.663571,1.585)); +#238437 = LINE('',#238438,#238439); +#238438 = CARTESIAN_POINT('',(117.04637,-52.663571,1.585)); +#238439 = VECTOR('',#238440,1.); +#238440 = DIRECTION('',(1.,0.,0.)); +#238441 = ORIENTED_EDGE('',*,*,#238442,.T.); +#238442 = EDGE_CURVE('',#238435,#238443,#238445,.T.); +#238443 = VERTEX_POINT('',#238444); +#238444 = CARTESIAN_POINT('',(117.163951,-52.632293,1.585)); +#238445 = LINE('',#238446,#238447); +#238446 = CARTESIAN_POINT('',(117.101395,-52.663571,1.585)); +#238447 = VECTOR('',#238448,1.); +#238448 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#238449 = ORIENTED_EDGE('',*,*,#238450,.T.); +#238450 = EDGE_CURVE('',#238443,#238451,#238453,.T.); +#238451 = VERTEX_POINT('',#238452); +#238452 = CARTESIAN_POINT('',(117.191889,-52.604354,1.585)); +#238453 = LINE('',#238454,#238455); +#238454 = CARTESIAN_POINT('',(117.163951,-52.632293,1.585)); +#238455 = VECTOR('',#238456,1.); +#238456 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#238457 = ORIENTED_EDGE('',*,*,#238458,.T.); +#238458 = EDGE_CURVE('',#238451,#238459,#238461,.T.); +#238459 = VERTEX_POINT('',#238460); +#238460 = CARTESIAN_POINT('',(117.226839,-52.534453,1.585)); +#238461 = LINE('',#238462,#238463); +#238462 = CARTESIAN_POINT('',(117.191889,-52.604354,1.585)); +#238463 = VECTOR('',#238464,1.); +#238464 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#238465 = ORIENTED_EDGE('',*,*,#238466,.T.); +#238466 = EDGE_CURVE('',#238459,#238467,#238469,.T.); +#238467 = VERTEX_POINT('',#238468); +#238468 = CARTESIAN_POINT('',(117.272887,-52.356645,1.585)); +#238469 = LINE('',#238470,#238471); +#238470 = CARTESIAN_POINT('',(117.226839,-52.534453,1.585)); +#238471 = VECTOR('',#238472,1.); +#238472 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#238473 = ORIENTED_EDGE('',*,*,#238474,.T.); +#238474 = EDGE_CURVE('',#238467,#238475,#238477,.T.); +#238475 = VERTEX_POINT('',#238476); +#238476 = CARTESIAN_POINT('',(117.32792,-52.254038,1.585)); +#238477 = LINE('',#238478,#238479); +#238478 = CARTESIAN_POINT('',(117.272887,-52.356645,1.585)); +#238479 = VECTOR('',#238480,1.); +#238480 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#238481 = ORIENTED_EDGE('',*,*,#238482,.T.); +#238482 = EDGE_CURVE('',#238475,#238483,#238485,.T.); +#238483 = VERTEX_POINT('',#238484); +#238484 = CARTESIAN_POINT('',(117.387671,-52.199004,1.585)); +#238485 = LINE('',#238486,#238487); +#238486 = CARTESIAN_POINT('',(117.32792,-52.254038,1.585)); +#238487 = VECTOR('',#238488,1.); +#238488 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#238489 = ORIENTED_EDGE('',*,*,#238490,.T.); +#238490 = EDGE_CURVE('',#238483,#238491,#238493,.T.); +#238491 = VERTEX_POINT('',#238492); +#238492 = CARTESIAN_POINT('',(117.617237,-52.156147,1.585)); +#238493 = CIRCLE('',#238494,0.258971949836); +#238494 = AXIS2_PLACEMENT_3D('',#238495,#238496,#238497); +#238495 = CARTESIAN_POINT('',(117.54487456064,-52.40480368736,1.585)); +#238496 = DIRECTION('',(0.,0.,-1.)); +#238497 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#238498 = ORIENTED_EDGE('',*,*,#238499,.T.); +#238499 = EDGE_CURVE('',#238491,#238500,#238502,.T.); +#238500 = VERTEX_POINT('',#238501); +#238501 = CARTESIAN_POINT('',(117.719844,-52.21118,1.585)); +#238502 = LINE('',#238503,#238504); +#238503 = CARTESIAN_POINT('',(117.617237,-52.156147,1.585)); +#238504 = VECTOR('',#238505,1.); +#238505 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#238506 = ORIENTED_EDGE('',*,*,#238507,.T.); +#238507 = EDGE_CURVE('',#238500,#238508,#238510,.T.); +#238508 = VERTEX_POINT('',#238509); +#238509 = CARTESIAN_POINT('',(117.774878,-52.270931,1.585)); +#238510 = LINE('',#238511,#238512); +#238511 = CARTESIAN_POINT('',(117.719844,-52.21118,1.585)); +#238512 = VECTOR('',#238513,1.); +#238513 = DIRECTION('',(0.677476981615,-0.735543975151,0.)); +#238514 = ORIENTED_EDGE('',*,*,#238515,.T.); +#238515 = EDGE_CURVE('',#238508,#238516,#238518,.T.); +#238516 = VERTEX_POINT('',#238517); +#238517 = CARTESIAN_POINT('',(117.821681,-52.371057,1.585)); +#238518 = LINE('',#238519,#238520); +#238519 = CARTESIAN_POINT('',(117.774878,-52.270931,1.585)); +#238520 = VECTOR('',#238521,1.); +#238521 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#238522 = ORIENTED_EDGE('',*,*,#238523,.T.); +#238523 = EDGE_CURVE('',#238516,#238524,#238526,.T.); +#238524 = VERTEX_POINT('',#238525); +#238525 = CARTESIAN_POINT('',(117.822563,-52.610222,1.585)); +#238526 = LINE('',#238527,#238528); +#238527 = CARTESIAN_POINT('',(117.821681,-52.371057,1.585)); +#238528 = VECTOR('',#238529,1.); +#238529 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#238530 = ORIENTED_EDGE('',*,*,#238531,.T.); +#238531 = EDGE_CURVE('',#238524,#238532,#238534,.T.); +#238532 = VERTEX_POINT('',#238533); +#238533 = CARTESIAN_POINT('',(117.778404,-52.749126,1.585)); +#238534 = LINE('',#238535,#238536); +#238535 = CARTESIAN_POINT('',(117.822563,-52.610222,1.585)); +#238536 = VECTOR('',#238537,1.); +#238537 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#238538 = ORIENTED_EDGE('',*,*,#238539,.T.); +#238539 = EDGE_CURVE('',#238532,#238540,#238542,.T.); +#238540 = VERTEX_POINT('',#238541); +#238541 = CARTESIAN_POINT('',(117.655076,-52.708016,1.585)); +#238542 = CIRCLE('',#238543,6.499966862258E-02); +#238543 = AXIS2_PLACEMENT_3D('',#238544,#238545,#238546); +#238544 = CARTESIAN_POINT('',(117.71674006734,-52.72857079797,1.585)); +#238545 = DIRECTION('',(-0.,0.,-1.)); +#238546 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#238547 = ORIENTED_EDGE('',*,*,#238548,.T.); +#238548 = EDGE_CURVE('',#238540,#238549,#238551,.T.); +#238549 = VERTEX_POINT('',#238550); +#238550 = CARTESIAN_POINT('',(117.694597,-52.589453,1.585)); +#238551 = LINE('',#238552,#238553); +#238552 = CARTESIAN_POINT('',(117.655076,-52.708016,1.585)); +#238553 = VECTOR('',#238554,1.); +#238554 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#238555 = ORIENTED_EDGE('',*,*,#238556,.T.); +#238556 = EDGE_CURVE('',#238549,#238557,#238559,.T.); +#238557 = VERTEX_POINT('',#238558); +#238558 = CARTESIAN_POINT('',(117.694597,-52.401059,1.585)); +#238559 = LINE('',#238560,#238561); +#238560 = CARTESIAN_POINT('',(117.694597,-52.589453,1.585)); +#238561 = VECTOR('',#238562,1.); +#238562 = DIRECTION('',(0.,1.,0.)); +#238563 = ORIENTED_EDGE('',*,*,#238564,.T.); +#238564 = EDGE_CURVE('',#238557,#238565,#238567,.T.); +#238565 = VERTEX_POINT('',#238566); +#238566 = CARTESIAN_POINT('',(117.572823,-52.279285,1.585)); +#238567 = CIRCLE('',#238568,0.170999251022); +#238568 = AXIS2_PLACEMENT_3D('',#238569,#238570,#238571); +#238569 = CARTESIAN_POINT('',(117.529244,-52.444638,1.585)); +#238570 = DIRECTION('',(0.,0.,1.)); +#238571 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#238572 = ORIENTED_EDGE('',*,*,#238573,.T.); +#238573 = EDGE_CURVE('',#238565,#238574,#238576,.T.); +#238574 = VERTEX_POINT('',#238575); +#238575 = CARTESIAN_POINT('',(117.517799,-52.279285,1.585)); +#238576 = LINE('',#238577,#238578); +#238577 = CARTESIAN_POINT('',(117.572823,-52.279285,1.585)); +#238578 = VECTOR('',#238579,1.); +#238579 = DIRECTION('',(-1.,0.,0.)); +#238580 = ORIENTED_EDGE('',*,*,#238581,.T.); +#238581 = EDGE_CURVE('',#238574,#238582,#238584,.T.); +#238582 = VERTEX_POINT('',#238583); +#238583 = CARTESIAN_POINT('',(117.455243,-52.310563,1.585)); +#238584 = LINE('',#238585,#238586); +#238585 = CARTESIAN_POINT('',(117.517799,-52.279285,1.585)); +#238586 = VECTOR('',#238587,1.); +#238587 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#238588 = ORIENTED_EDGE('',*,*,#238589,.T.); +#238589 = EDGE_CURVE('',#238582,#238590,#238592,.T.); +#238590 = VERTEX_POINT('',#238591); +#238591 = CARTESIAN_POINT('',(117.427303,-52.338503,1.585)); +#238592 = LINE('',#238593,#238594); +#238593 = CARTESIAN_POINT('',(117.455243,-52.310563,1.585)); +#238594 = VECTOR('',#238595,1.); +#238595 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#238596 = ORIENTED_EDGE('',*,*,#238597,.T.); +#238597 = EDGE_CURVE('',#238590,#238598,#238600,.T.); +#238598 = VERTEX_POINT('',#238599); +#238599 = CARTESIAN_POINT('',(117.392353,-52.408403,1.585)); +#238600 = LINE('',#238601,#238602); +#238601 = CARTESIAN_POINT('',(117.427303,-52.338503,1.585)); +#238602 = VECTOR('',#238603,1.); +#238603 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#238604 = ORIENTED_EDGE('',*,*,#238605,.T.); +#238605 = EDGE_CURVE('',#238598,#238606,#238608,.T.); +#238606 = VERTEX_POINT('',#238607); +#238607 = CARTESIAN_POINT('',(117.346306,-52.586211,1.585)); +#238608 = LINE('',#238609,#238610); +#238609 = CARTESIAN_POINT('',(117.392353,-52.408403,1.585)); +#238610 = VECTOR('',#238611,1.); +#238611 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#238612 = ORIENTED_EDGE('',*,*,#238613,.T.); +#238613 = EDGE_CURVE('',#238606,#238614,#238616,.T.); +#238614 = VERTEX_POINT('',#238615); +#238615 = CARTESIAN_POINT('',(117.291273,-52.688819,1.585)); +#238616 = LINE('',#238617,#238618); +#238617 = CARTESIAN_POINT('',(117.346306,-52.586211,1.585)); +#238618 = VECTOR('',#238619,1.); +#238619 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#238620 = ORIENTED_EDGE('',*,*,#238621,.T.); +#238621 = EDGE_CURVE('',#238614,#238622,#238624,.T.); +#238622 = VERTEX_POINT('',#238623); +#238623 = CARTESIAN_POINT('',(117.231523,-52.743852,1.585)); +#238624 = LINE('',#238625,#238626); +#238625 = CARTESIAN_POINT('',(117.291273,-52.688819,1.585)); +#238626 = VECTOR('',#238627,1.); +#238627 = DIRECTION('',(-0.73554445943,-0.677476455829,0.)); +#238628 = ORIENTED_EDGE('',*,*,#238629,.T.); +#238629 = EDGE_CURVE('',#238622,#238630,#238632,.T.); +#238630 = VERTEX_POINT('',#238631); +#238631 = CARTESIAN_POINT('',(116.908013,-52.737465,1.585)); +#238632 = CIRCLE('',#238633,0.260197694649); +#238633 = AXIS2_PLACEMENT_3D('',#238634,#238635,#238636); +#238634 = CARTESIAN_POINT('',(117.07379048924,-52.53691409783,1.585)); +#238635 = DIRECTION('',(-0.,0.,-1.)); +#238636 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#238637 = ORIENTED_EDGE('',*,*,#238638,.T.); +#238638 = EDGE_CURVE('',#238630,#238639,#238641,.T.); +#238639 = VERTEX_POINT('',#238640); +#238640 = CARTESIAN_POINT('',(116.850702,-52.680154,1.585)); +#238641 = LINE('',#238642,#238643); +#238642 = CARTESIAN_POINT('',(116.908013,-52.737465,1.585)); +#238643 = VECTOR('',#238644,1.); +#238644 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#238645 = ORIENTED_EDGE('',*,*,#238646,.T.); +#238646 = EDGE_CURVE('',#238639,#238647,#238649,.T.); +#238647 = VERTEX_POINT('',#238648); +#238648 = CARTESIAN_POINT('',(116.797512,-52.571798,1.585)); +#238649 = LINE('',#238650,#238651); +#238650 = CARTESIAN_POINT('',(116.850702,-52.680154,1.585)); +#238651 = VECTOR('',#238652,1.); +#238652 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#238653 = ORIENTED_EDGE('',*,*,#238654,.T.); +#238654 = EDGE_CURVE('',#238647,#238655,#238657,.T.); +#238655 = VERTEX_POINT('',#238656); +#238656 = CARTESIAN_POINT('',(116.79663,-52.332634,1.585)); +#238657 = LINE('',#238658,#238659); +#238658 = CARTESIAN_POINT('',(116.797512,-52.571798,1.585)); +#238659 = VECTOR('',#238660,1.); +#238660 = DIRECTION('',(-3.687820919426E-03,0.999993199965,0.)); +#238661 = ORIENTED_EDGE('',*,*,#238662,.T.); +#238662 = EDGE_CURVE('',#238655,#238399,#238663,.T.); +#238663 = LINE('',#238664,#238665); +#238664 = CARTESIAN_POINT('',(116.79663,-52.332634,1.585)); +#238665 = VECTOR('',#238666,1.); +#238666 = DIRECTION('',(0.302974833625,0.952998557287,0.)); +#238667 = PLANE('',#238668); +#238668 = AXIS2_PLACEMENT_3D('',#238669,#238670,#238671); +#238669 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238670 = DIRECTION('',(0.,0.,1.)); +#238671 = DIRECTION('',(1.,0.,-0.)); +#238672 = SHELL_BASED_SURFACE_MODEL('',(#238673)); +#238673 = OPEN_SHELL('',(#238674)); +#238674 = ADVANCED_FACE('',(#238675),#238845,.T.); +#238675 = FACE_BOUND('',#238676,.F.); +#238676 = EDGE_LOOP('',(#238677,#238688,#238696,#238705,#238713,#238722, + #238730,#238738,#238746,#238755,#238763,#238772,#238780,#238789, + #238797,#238806,#238814,#238822,#238830,#238839)); +#238677 = ORIENTED_EDGE('',*,*,#238678,.T.); +#238678 = EDGE_CURVE('',#238679,#238681,#238683,.T.); +#238679 = VERTEX_POINT('',#238680); +#238680 = CARTESIAN_POINT('',(147.379349,-52.06118,1.585)); +#238681 = VERTEX_POINT('',#238682); +#238682 = CARTESIAN_POINT('',(147.471273,-52.153104,1.585)); +#238683 = CIRCLE('',#238684,6.50000837538E-02); +#238684 = AXIS2_PLACEMENT_3D('',#238685,#238686,#238687); +#238685 = CARTESIAN_POINT('',(147.42531098493,-52.10714201506,1.585)); +#238686 = DIRECTION('',(0.,0.,-1.)); +#238687 = DIRECTION('',(-0.707106549404,0.707107012969,-0.)); +#238688 = ORIENTED_EDGE('',*,*,#238689,.T.); +#238689 = EDGE_CURVE('',#238681,#238690,#238692,.T.); +#238690 = VERTEX_POINT('',#238691); +#238691 = CARTESIAN_POINT('',(147.439266,-52.18511,1.585)); +#238692 = LINE('',#238693,#238694); +#238693 = CARTESIAN_POINT('',(147.471273,-52.153104,1.585)); +#238694 = VECTOR('',#238695,1.); +#238695 = DIRECTION('',(-0.7071178274,-0.707095734801,0.)); +#238696 = ORIENTED_EDGE('',*,*,#238697,.T.); +#238697 = EDGE_CURVE('',#238690,#238698,#238700,.T.); +#238698 = VERTEX_POINT('',#238699); +#238699 = CARTESIAN_POINT('',(147.439265,-52.457743,1.585)); +#238700 = CIRCLE('',#238701,0.272201331757); +#238701 = AXIS2_PLACEMENT_3D('',#238702,#238703,#238704); +#238702 = CARTESIAN_POINT('',(147.67487402454,-52.32142736419,1.585)); +#238703 = DIRECTION('',(0.,0.,1.)); +#238704 = DIRECTION('',(-0.865565289566,0.500796095731,0.)); +#238705 = ORIENTED_EDGE('',*,*,#238706,.T.); +#238706 = EDGE_CURVE('',#238698,#238707,#238709,.T.); +#238707 = VERTEX_POINT('',#238708); +#238708 = CARTESIAN_POINT('',(147.506669,-52.525149,1.585)); +#238709 = LINE('',#238710,#238711); +#238710 = CARTESIAN_POINT('',(147.439265,-52.457743,1.585)); +#238711 = VECTOR('',#238712,1.); +#238712 = DIRECTION('',(0.707096290688,-0.707117271529,0.)); +#238713 = ORIENTED_EDGE('',*,*,#238714,.T.); +#238714 = EDGE_CURVE('',#238707,#238715,#238717,.T.); +#238715 = VERTEX_POINT('',#238716); +#238716 = CARTESIAN_POINT('',(147.845881,-52.599285,1.585)); +#238717 = CIRCLE('',#238718,0.553317785495); +#238718 = AXIS2_PLACEMENT_3D('',#238719,#238720,#238721); +#238719 = CARTESIAN_POINT('',(147.7884500839,-52.04895576979,1.585)); +#238720 = DIRECTION('',(0.,0.,1.)); +#238721 = DIRECTION('',(-0.509257232092,-0.860614357051,0.)); +#238722 = ORIENTED_EDGE('',*,*,#238723,.T.); +#238723 = EDGE_CURVE('',#238715,#238724,#238726,.T.); +#238724 = VERTEX_POINT('',#238725); +#238725 = CARTESIAN_POINT('',(148.002622,-52.560099,1.585)); +#238726 = LINE('',#238727,#238728); +#238727 = CARTESIAN_POINT('',(147.845881,-52.599285,1.585)); +#238728 = VECTOR('',#238729,1.); +#238729 = DIRECTION('',(0.970141407879,0.242539994061,0.)); +#238730 = ORIENTED_EDGE('',*,*,#238731,.T.); +#238731 = EDGE_CURVE('',#238724,#238732,#238734,.T.); +#238732 = VERTEX_POINT('',#238733); +#238733 = CARTESIAN_POINT('',(148.072522,-52.52515,1.585)); +#238734 = LINE('',#238735,#238736); +#238735 = CARTESIAN_POINT('',(148.002622,-52.560099,1.585)); +#238736 = VECTOR('',#238737,1.); +#238737 = DIRECTION('',(0.894432309295,0.447203358763,0.)); +#238738 = ORIENTED_EDGE('',*,*,#238739,.T.); +#238739 = EDGE_CURVE('',#238732,#238740,#238742,.T.); +#238740 = VERTEX_POINT('',#238741); +#238741 = CARTESIAN_POINT('',(148.139928,-52.457743,1.585)); +#238742 = LINE('',#238743,#238744); +#238743 = CARTESIAN_POINT('',(148.072522,-52.52515,1.585)); +#238744 = VECTOR('',#238745,1.); +#238745 = DIRECTION('',(0.707101536074,0.70711202626,0.)); +#238746 = ORIENTED_EDGE('',*,*,#238747,.T.); +#238747 = EDGE_CURVE('',#238740,#238748,#238750,.T.); +#238748 = VERTEX_POINT('',#238749); +#238749 = CARTESIAN_POINT('',(148.139928,-52.185111,1.585)); +#238750 = CIRCLE('',#238751,0.272194686174); +#238751 = AXIS2_PLACEMENT_3D('',#238752,#238753,#238754); +#238752 = CARTESIAN_POINT('',(147.90432686391,-52.321427,1.585)); +#238753 = DIRECTION('',(0.,-0.,1.)); +#238754 = DIRECTION('',(0.865561115092,-0.500803310733,-0.)); +#238755 = ORIENTED_EDGE('',*,*,#238756,.T.); +#238756 = EDGE_CURVE('',#238748,#238757,#238759,.T.); +#238757 = VERTEX_POINT('',#238758); +#238758 = CARTESIAN_POINT('',(148.107921,-52.153104,1.585)); +#238759 = LINE('',#238760,#238761); +#238760 = CARTESIAN_POINT('',(148.139928,-52.185111,1.585)); +#238761 = VECTOR('',#238762,1.); +#238762 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#238763 = ORIENTED_EDGE('',*,*,#238764,.T.); +#238764 = EDGE_CURVE('',#238757,#238765,#238767,.T.); +#238765 = VERTEX_POINT('',#238766); +#238766 = CARTESIAN_POINT('',(148.199843,-52.06118,1.585)); +#238767 = CIRCLE('',#238768,6.499937665169E-02); +#238768 = AXIS2_PLACEMENT_3D('',#238769,#238770,#238771); +#238769 = CARTESIAN_POINT('',(148.15388176676,-52.10714176677,1.585)); +#238770 = DIRECTION('',(0.,0.,-1.)); +#238771 = DIRECTION('',(-0.707095500505,-0.707118061688,-0.)); +#238772 = ORIENTED_EDGE('',*,*,#238773,.T.); +#238773 = EDGE_CURVE('',#238765,#238774,#238776,.T.); +#238774 = VERTEX_POINT('',#238775); +#238775 = CARTESIAN_POINT('',(148.251003,-52.116461,1.585)); +#238776 = LINE('',#238777,#238778); +#238777 = CARTESIAN_POINT('',(148.199843,-52.06118,1.585)); +#238778 = VECTOR('',#238779,1.); +#238779 = DIRECTION('',(0.679221365095,-0.733933469191,0.)); +#238780 = ORIENTED_EDGE('',*,*,#238781,.T.); +#238781 = EDGE_CURVE('',#238774,#238782,#238784,.T.); +#238782 = VERTEX_POINT('',#238783); +#238783 = CARTESIAN_POINT('',(148.250999,-52.526399,1.585)); +#238784 = CIRCLE('',#238785,0.409312568567); +#238785 = AXIS2_PLACEMENT_3D('',#238786,#238787,#238788); +#238786 = CARTESIAN_POINT('',(147.89670664806,-52.32142654294,1.585)); +#238787 = DIRECTION('',(0.,0.,-1.)); +#238788 = DIRECTION('',(0.865588743515,0.500755556236,0.)); +#238789 = ORIENTED_EDGE('',*,*,#238790,.T.); +#238790 = EDGE_CURVE('',#238782,#238791,#238793,.T.); +#238791 = VERTEX_POINT('',#238792); +#238792 = CARTESIAN_POINT('',(148.148322,-52.630322,1.585)); +#238793 = LINE('',#238794,#238795); +#238794 = CARTESIAN_POINT('',(148.250999,-52.526399,1.585)); +#238795 = VECTOR('',#238796,1.); +#238796 = DIRECTION('',(-0.70282945415,-0.711358389548,0.)); +#238797 = ORIENTED_EDGE('',*,*,#238798,.T.); +#238798 = EDGE_CURVE('',#238791,#238799,#238801,.T.); +#238799 = VERTEX_POINT('',#238800); +#238800 = CARTESIAN_POINT('',(147.709546,-52.727344,1.585)); +#238801 = CIRCLE('',#238802,0.675422176574); +#238802 = AXIS2_PLACEMENT_3D('',#238803,#238804,#238805); +#238803 = CARTESIAN_POINT('',(147.79141275007,-52.05690164465,1.585)); +#238804 = DIRECTION('',(0.,0.,-1.)); +#238805 = DIRECTION('',(0.528423943286,-0.84898064534,0.)); +#238806 = ORIENTED_EDGE('',*,*,#238807,.T.); +#238807 = EDGE_CURVE('',#238799,#238808,#238810,.T.); +#238808 = VERTEX_POINT('',#238809); +#238809 = CARTESIAN_POINT('',(147.524813,-52.679566,1.585)); +#238810 = LINE('',#238811,#238812); +#238811 = CARTESIAN_POINT('',(147.709546,-52.727344,1.585)); +#238812 = VECTOR('',#238813,1.); +#238813 = DIRECTION('',(-0.968144086,0.250393747413,0.)); +#238814 = ORIENTED_EDGE('',*,*,#238815,.T.); +#238815 = EDGE_CURVE('',#238808,#238816,#238818,.T.); +#238816 = VERTEX_POINT('',#238817); +#238817 = CARTESIAN_POINT('',(147.422206,-52.624533,1.585)); +#238818 = LINE('',#238819,#238820); +#238819 = CARTESIAN_POINT('',(147.524813,-52.679566,1.585)); +#238820 = VECTOR('',#238821,1.); +#238821 = DIRECTION('',(-0.88124761447,0.472654886773,0.)); +#238822 = ORIENTED_EDGE('',*,*,#238823,.T.); +#238823 = EDGE_CURVE('',#238816,#238824,#238826,.T.); +#238824 = VERTEX_POINT('',#238825); +#238825 = CARTESIAN_POINT('',(147.328191,-52.526395,1.585)); +#238826 = LINE('',#238827,#238828); +#238827 = CARTESIAN_POINT('',(147.422206,-52.624533,1.585)); +#238828 = VECTOR('',#238829,1.); +#238829 = DIRECTION('',(-0.691775262803,0.722112862213,0.)); +#238830 = ORIENTED_EDGE('',*,*,#238831,.T.); +#238831 = EDGE_CURVE('',#238824,#238832,#238834,.T.); +#238832 = VERTEX_POINT('',#238833); +#238833 = CARTESIAN_POINT('',(147.328194,-52.116455,1.585)); +#238834 = CIRCLE('',#238835,0.409312909751); +#238835 = AXIS2_PLACEMENT_3D('',#238836,#238837,#238838); +#238836 = CARTESIAN_POINT('',(147.68248666757,-52.32142759277,1.585)); +#238837 = DIRECTION('',(0.,0.,-1.)); +#238838 = DIRECTION('',(-0.865586350046,-0.50075969348,-0.)); +#238839 = ORIENTED_EDGE('',*,*,#238840,.T.); +#238840 = EDGE_CURVE('',#238832,#238679,#238841,.T.); +#238841 = LINE('',#238842,#238843); +#238842 = CARTESIAN_POINT('',(147.328194,-52.116455,1.585)); +#238843 = VECTOR('',#238844,1.); +#238844 = DIRECTION('',(0.679225318256,0.733929810704,0.)); +#238845 = PLANE('',#238846); +#238846 = AXIS2_PLACEMENT_3D('',#238847,#238848,#238849); +#238847 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238848 = DIRECTION('',(0.,0.,1.)); +#238849 = DIRECTION('',(1.,0.,-0.)); +#238850 = SHELL_BASED_SURFACE_MODEL('',(#238851)); +#238851 = OPEN_SHELL('',(#238852)); +#238852 = ADVANCED_FACE('',(#238853),#238930,.T.); +#238853 = FACE_BOUND('',#238854,.F.); +#238854 = EDGE_LOOP('',(#238855,#238866,#238874,#238882,#238891,#238899, + #238907,#238916,#238924)); +#238855 = ORIENTED_EDGE('',*,*,#238856,.T.); +#238856 = EDGE_CURVE('',#238857,#238859,#238861,.T.); +#238857 = VERTEX_POINT('',#238858); +#238858 = CARTESIAN_POINT('',(124.419545,-52.089411,1.585)); +#238859 = VERTEX_POINT('',#238860); +#238860 = CARTESIAN_POINT('',(124.544597,-52.114285,1.585)); +#238861 = CIRCLE('',#238862,6.499988811648E-02); +#238862 = AXIS2_PLACEMENT_3D('',#238863,#238864,#238865); +#238863 = CARTESIAN_POINT('',(124.47959711188,-52.1142852701,1.585)); +#238864 = DIRECTION('',(0.,0.,-1.)); +#238865 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#238866 = ORIENTED_EDGE('',*,*,#238867,.T.); +#238867 = EDGE_CURVE('',#238859,#238868,#238870,.T.); +#238868 = VERTEX_POINT('',#238869); +#238869 = CARTESIAN_POINT('',(124.544597,-52.306427,1.585)); +#238870 = LINE('',#238871,#238872); +#238871 = CARTESIAN_POINT('',(124.544597,-52.114285,1.585)); +#238872 = VECTOR('',#238873,1.); +#238873 = DIRECTION('',(0.,-1.,0.)); +#238874 = ORIENTED_EDGE('',*,*,#238875,.T.); +#238875 = EDGE_CURVE('',#238868,#238876,#238878,.T.); +#238876 = VERTEX_POINT('',#238877); +#238877 = CARTESIAN_POINT('',(125.379597,-52.306427,1.585)); +#238878 = LINE('',#238879,#238880); +#238879 = CARTESIAN_POINT('',(124.544597,-52.306427,1.585)); +#238880 = VECTOR('',#238881,1.); +#238881 = DIRECTION('',(1.,0.,0.)); +#238882 = ORIENTED_EDGE('',*,*,#238883,.T.); +#238883 = EDGE_CURVE('',#238876,#238884,#238886,.T.); +#238884 = VERTEX_POINT('',#238885); +#238885 = CARTESIAN_POINT('',(125.379597,-52.436427,1.585)); +#238886 = CIRCLE('',#238887,6.500000000091E-02); +#238887 = AXIS2_PLACEMENT_3D('',#238888,#238889,#238890); +#238888 = CARTESIAN_POINT('',(125.37959665513,-52.371427,1.585)); +#238889 = DIRECTION('',(0.,0.,-1.)); +#238890 = DIRECTION('',(5.305658025668E-06,0.999999999986,0.)); +#238891 = ORIENTED_EDGE('',*,*,#238892,.T.); +#238892 = EDGE_CURVE('',#238884,#238893,#238895,.T.); +#238893 = VERTEX_POINT('',#238894); +#238894 = CARTESIAN_POINT('',(124.544597,-52.436427,1.585)); +#238895 = LINE('',#238896,#238897); +#238896 = CARTESIAN_POINT('',(125.379597,-52.436427,1.585)); +#238897 = VECTOR('',#238898,1.); +#238898 = DIRECTION('',(-1.,0.,0.)); +#238899 = ORIENTED_EDGE('',*,*,#238900,.T.); +#238900 = EDGE_CURVE('',#238893,#238901,#238903,.T.); +#238901 = VERTEX_POINT('',#238902); +#238902 = CARTESIAN_POINT('',(124.544597,-52.62857,1.585)); +#238903 = LINE('',#238904,#238905); +#238904 = CARTESIAN_POINT('',(124.544597,-52.436427,1.585)); +#238905 = VECTOR('',#238906,1.); +#238906 = DIRECTION('',(0.,-1.,0.)); +#238907 = ORIENTED_EDGE('',*,*,#238908,.T.); +#238908 = EDGE_CURVE('',#238901,#238909,#238911,.T.); +#238909 = VERTEX_POINT('',#238910); +#238910 = CARTESIAN_POINT('',(124.414597,-52.62857,1.585)); +#238911 = CIRCLE('',#238912,6.500000000091E-02); +#238912 = AXIS2_PLACEMENT_3D('',#238913,#238914,#238915); +#238913 = CARTESIAN_POINT('',(124.479597,-52.62856965513,1.585)); +#238914 = DIRECTION('',(-0.,0.,-1.)); +#238915 = DIRECTION('',(0.999999999986,-5.305658134982E-06,-0.)); +#238916 = ORIENTED_EDGE('',*,*,#238917,.T.); +#238917 = EDGE_CURVE('',#238909,#238918,#238920,.T.); +#238918 = VERTEX_POINT('',#238919); +#238919 = CARTESIAN_POINT('',(124.414597,-52.114285,1.585)); +#238920 = LINE('',#238921,#238922); +#238921 = CARTESIAN_POINT('',(124.414597,-52.62857,1.585)); +#238922 = VECTOR('',#238923,1.); +#238923 = DIRECTION('',(0.,1.,0.)); +#238924 = ORIENTED_EDGE('',*,*,#238925,.T.); +#238925 = EDGE_CURVE('',#238918,#238857,#238926,.T.); +#238926 = LINE('',#238927,#238928); +#238927 = CARTESIAN_POINT('',(124.414597,-52.114285,1.585)); +#238928 = VECTOR('',#238929,1.); +#238929 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#238930 = PLANE('',#238931); +#238931 = AXIS2_PLACEMENT_3D('',#238932,#238933,#238934); +#238932 = CARTESIAN_POINT('',(0.,0.,1.585)); +#238933 = DIRECTION('',(0.,0.,1.)); +#238934 = DIRECTION('',(1.,0.,-0.)); +#238935 = SHELL_BASED_SURFACE_MODEL('',(#238936)); +#238936 = OPEN_SHELL('',(#238937)); +#238937 = ADVANCED_FACE('',(#238938,#239072),#239131,.T.); +#238938 = FACE_BOUND('',#238939,.F.); +#238939 = EDGE_LOOP('',(#238940,#238951,#238959,#238967,#238975,#238983, + #238991,#239000,#239008,#239016,#239024,#239033,#239041,#239050, + #239058,#239066)); +#238940 = ORIENTED_EDGE('',*,*,#238941,.T.); +#238941 = EDGE_CURVE('',#238942,#238944,#238946,.T.); +#238942 = VERTEX_POINT('',#238943); +#238943 = CARTESIAN_POINT('',(127.108013,-51.933961,1.585)); +#238944 = VERTEX_POINT('',#238945); +#238945 = CARTESIAN_POINT('',(127.388666,-51.884718,1.585)); +#238946 = CIRCLE('',#238947,0.327183487819); +#238947 = AXIS2_PLACEMENT_3D('',#238948,#238949,#238950); +#238948 = CARTESIAN_POINT('',(127.29924076591,-52.19944353472,1.585)); +#238949 = DIRECTION('',(0.,0.,-1.)); +#238950 = DIRECTION('',(-0.584466432543,0.811417888163,0.)); +#238951 = ORIENTED_EDGE('',*,*,#238952,.T.); +#238952 = EDGE_CURVE('',#238944,#238953,#238955,.T.); +#238953 = VERTEX_POINT('',#238954); +#238954 = CARTESIAN_POINT('',(127.491273,-51.939751,1.585)); +#238955 = LINE('',#238956,#238957); +#238956 = CARTESIAN_POINT('',(127.388666,-51.884718,1.585)); +#238957 = VECTOR('',#238958,1.); +#238958 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#238959 = ORIENTED_EDGE('',*,*,#238960,.T.); +#238960 = EDGE_CURVE('',#238953,#238961,#238963,.T.); +#238961 = VERTEX_POINT('',#238962); +#238962 = CARTESIAN_POINT('',(127.546306,-51.999501,1.585)); +#238963 = LINE('',#238964,#238965); +#238964 = CARTESIAN_POINT('',(127.491273,-51.939751,1.585)); +#238965 = VECTOR('',#238966,1.); +#238966 = DIRECTION('',(0.677476455829,-0.73554445943,0.)); +#238967 = ORIENTED_EDGE('',*,*,#238968,.T.); +#238968 = EDGE_CURVE('',#238961,#238969,#238971,.T.); +#238969 = VERTEX_POINT('',#238970); +#238970 = CARTESIAN_POINT('',(127.593109,-52.099628,1.585)); +#238971 = LINE('',#238972,#238973); +#238972 = CARTESIAN_POINT('',(127.546306,-51.999501,1.585)); +#238973 = VECTOR('',#238974,1.); +#238974 = DIRECTION('',(0.423457959549,-0.905915755738,0.)); +#238975 = ORIENTED_EDGE('',*,*,#238976,.T.); +#238976 = EDGE_CURVE('',#238969,#238977,#238979,.T.); +#238977 = VERTEX_POINT('',#238978); +#238978 = CARTESIAN_POINT('',(127.596025,-52.118013,1.585)); +#238979 = LINE('',#238980,#238981); +#238980 = CARTESIAN_POINT('',(127.593109,-52.099628,1.585)); +#238981 = VECTOR('',#238982,1.); +#238982 = DIRECTION('',(0.15664943421,-0.987654268842,0.)); +#238983 = ORIENTED_EDGE('',*,*,#238984,.T.); +#238984 = EDGE_CURVE('',#238977,#238985,#238987,.T.); +#238985 = VERTEX_POINT('',#238986); +#238986 = CARTESIAN_POINT('',(127.922322,-51.889606,1.585)); +#238987 = LINE('',#238988,#238989); +#238988 = CARTESIAN_POINT('',(127.596025,-52.118013,1.585)); +#238989 = VECTOR('',#238990,1.); +#238990 = DIRECTION('',(0.819232982088,0.573460827834,0.)); +#238991 = ORIENTED_EDGE('',*,*,#238992,.T.); +#238992 = EDGE_CURVE('',#238985,#238993,#238995,.T.); +#238993 = VERTEX_POINT('',#238994); +#238994 = CARTESIAN_POINT('',(127.996872,-51.996106,1.585)); +#238995 = CIRCLE('',#238996,6.499990865384E-02); +#238996 = AXIS2_PLACEMENT_3D('',#238997,#238998,#238999); +#238997 = CARTESIAN_POINT('',(127.95959707222,-51.94285594944,1.585)); +#238998 = DIRECTION('',(0.,0.,-1.)); +#238999 = DIRECTION('',(-0.573463455551,0.819231142687,0.)); +#239000 = ORIENTED_EDGE('',*,*,#239001,.T.); +#239001 = EDGE_CURVE('',#238993,#239002,#239004,.T.); +#239002 = VERTEX_POINT('',#239003); +#239003 = CARTESIAN_POINT('',(127.596025,-52.276698,1.585)); +#239004 = LINE('',#239005,#239006); +#239005 = CARTESIAN_POINT('',(127.996872,-51.996106,1.585)); +#239006 = VECTOR('',#239007,1.); +#239007 = DIRECTION('',(-0.819232784656,-0.57346110988,0.)); +#239008 = ORIENTED_EDGE('',*,*,#239009,.T.); +#239009 = EDGE_CURVE('',#239002,#239010,#239012,.T.); +#239010 = VERTEX_POINT('',#239011); +#239011 = CARTESIAN_POINT('',(127.596025,-52.392142,1.585)); +#239012 = LINE('',#239013,#239014); +#239013 = CARTESIAN_POINT('',(127.596025,-52.276698,1.585)); +#239014 = VECTOR('',#239015,1.); +#239015 = DIRECTION('',(0.,-1.,0.)); +#239016 = ORIENTED_EDGE('',*,*,#239017,.T.); +#239017 = EDGE_CURVE('',#239010,#239018,#239020,.T.); +#239018 = VERTEX_POINT('',#239019); +#239019 = CARTESIAN_POINT('',(127.959597,-52.392142,1.585)); +#239020 = LINE('',#239021,#239022); +#239021 = CARTESIAN_POINT('',(127.596025,-52.392142,1.585)); +#239022 = VECTOR('',#239023,1.); +#239023 = DIRECTION('',(1.,0.,0.)); +#239024 = ORIENTED_EDGE('',*,*,#239025,.T.); +#239025 = EDGE_CURVE('',#239018,#239026,#239028,.T.); +#239026 = VERTEX_POINT('',#239027); +#239027 = CARTESIAN_POINT('',(127.959597,-52.522142,1.585)); +#239028 = CIRCLE('',#239029,6.500000000092E-02); +#239029 = AXIS2_PLACEMENT_3D('',#239030,#239031,#239032); +#239030 = CARTESIAN_POINT('',(127.95959665513,-52.457142,1.585)); +#239031 = DIRECTION('',(0.,0.,-1.)); +#239032 = DIRECTION('',(5.305658462926E-06,0.999999999986,0.)); +#239033 = ORIENTED_EDGE('',*,*,#239034,.T.); +#239034 = EDGE_CURVE('',#239026,#239035,#239037,.T.); +#239035 = VERTEX_POINT('',#239036); +#239036 = CARTESIAN_POINT('',(127.059597,-52.522142,1.585)); +#239037 = LINE('',#239038,#239039); +#239038 = CARTESIAN_POINT('',(127.959597,-52.522142,1.585)); +#239039 = VECTOR('',#239040,1.); +#239040 = DIRECTION('',(-1.,0.,0.)); +#239041 = ORIENTED_EDGE('',*,*,#239042,.T.); +#239042 = EDGE_CURVE('',#239035,#239043,#239045,.T.); +#239043 = VERTEX_POINT('',#239044); +#239044 = CARTESIAN_POINT('',(126.994597,-52.457142,1.585)); +#239045 = CIRCLE('',#239046,6.500103935389E-02); +#239046 = AXIS2_PLACEMENT_3D('',#239047,#239048,#239049); +#239047 = CARTESIAN_POINT('',(127.05959803934,-52.45714096065,1.585)); +#239048 = DIRECTION('',(0.,0.,-1.)); +#239049 = DIRECTION('',(-1.598967627357E-05,-0.999999999872,-0.)); +#239050 = ORIENTED_EDGE('',*,*,#239051,.T.); +#239051 = EDGE_CURVE('',#239043,#239052,#239054,.T.); +#239052 = VERTEX_POINT('',#239053); +#239053 = CARTESIAN_POINT('',(126.997512,-52.099628,1.585)); +#239054 = LINE('',#239055,#239056); +#239055 = CARTESIAN_POINT('',(126.994597,-52.457142,1.585)); +#239056 = VECTOR('',#239057,1.); +#239057 = DIRECTION('',(8.153255845176E-03,0.999966761657,0.)); +#239058 = ORIENTED_EDGE('',*,*,#239059,.T.); +#239059 = EDGE_CURVE('',#239052,#239060,#239062,.T.); +#239060 = VERTEX_POINT('',#239061); +#239061 = CARTESIAN_POINT('',(127.050702,-51.991272,1.585)); +#239062 = LINE('',#239063,#239064); +#239063 = CARTESIAN_POINT('',(126.997512,-52.099628,1.585)); +#239064 = VECTOR('',#239065,1.); +#239065 = DIRECTION('',(0.440653527492,0.897677263112,0.)); +#239066 = ORIENTED_EDGE('',*,*,#239067,.T.); +#239067 = EDGE_CURVE('',#239060,#238942,#239068,.T.); +#239068 = LINE('',#239069,#239070); +#239069 = CARTESIAN_POINT('',(127.050702,-51.991272,1.585)); +#239070 = VECTOR('',#239071,1.); +#239071 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#239072 = FACE_BOUND('',#239073,.F.); +#239073 = EDGE_LOOP('',(#239074,#239085,#239093,#239101,#239109,#239117, + #239125)); +#239074 = ORIENTED_EDGE('',*,*,#239075,.T.); +#239075 = EDGE_CURVE('',#239076,#239078,#239080,.T.); +#239076 = VERTEX_POINT('',#239077); +#239077 = CARTESIAN_POINT('',(127.406808,-52.039134,1.585)); +#239078 = VERTEX_POINT('',#239079); +#239079 = CARTESIAN_POINT('',(127.155875,-52.067072,1.585)); +#239080 = CIRCLE('',#239081,0.180979134862); +#239081 = AXIS2_PLACEMENT_3D('',#239082,#239083,#239084); +#239082 = CARTESIAN_POINT('',(127.29569076987,-52.18198500078,1.585)); +#239083 = DIRECTION('',(0.,0.,1.)); +#239084 = DIRECTION('',(0.613978126307,0.78932303933,-0.)); +#239085 = ORIENTED_EDGE('',*,*,#239086,.T.); +#239086 = EDGE_CURVE('',#239078,#239087,#239089,.T.); +#239087 = VERTEX_POINT('',#239088); +#239088 = CARTESIAN_POINT('',(127.124597,-52.129629,1.585)); +#239089 = LINE('',#239090,#239091); +#239090 = CARTESIAN_POINT('',(127.155875,-52.067072,1.585)); +#239091 = VECTOR('',#239092,1.); +#239092 = DIRECTION('',(-0.447207876354,-0.89443005055,0.)); +#239093 = ORIENTED_EDGE('',*,*,#239094,.T.); +#239094 = EDGE_CURVE('',#239087,#239095,#239097,.T.); +#239095 = VERTEX_POINT('',#239096); +#239096 = CARTESIAN_POINT('',(127.124597,-52.392142,1.585)); +#239097 = LINE('',#239098,#239099); +#239098 = CARTESIAN_POINT('',(127.124597,-52.129629,1.585)); +#239099 = VECTOR('',#239100,1.); +#239100 = DIRECTION('',(0.,-1.,0.)); +#239101 = ORIENTED_EDGE('',*,*,#239102,.T.); +#239102 = EDGE_CURVE('',#239095,#239103,#239105,.T.); +#239103 = VERTEX_POINT('',#239104); +#239104 = CARTESIAN_POINT('',(127.466025,-52.392142,1.585)); +#239105 = LINE('',#239106,#239107); +#239106 = CARTESIAN_POINT('',(127.124597,-52.392142,1.585)); +#239107 = VECTOR('',#239108,1.); +#239108 = DIRECTION('',(1.,0.,0.)); +#239109 = ORIENTED_EDGE('',*,*,#239110,.T.); +#239110 = EDGE_CURVE('',#239103,#239111,#239113,.T.); +#239111 = VERTEX_POINT('',#239112); +#239112 = CARTESIAN_POINT('',(127.466025,-52.129629,1.585)); +#239113 = LINE('',#239114,#239115); +#239114 = CARTESIAN_POINT('',(127.466025,-52.392142,1.585)); +#239115 = VECTOR('',#239116,1.); +#239116 = DIRECTION('',(0.,1.,0.)); +#239117 = ORIENTED_EDGE('',*,*,#239118,.T.); +#239118 = EDGE_CURVE('',#239111,#239119,#239121,.T.); +#239119 = VERTEX_POINT('',#239120); +#239120 = CARTESIAN_POINT('',(127.434746,-52.067072,1.585)); +#239121 = LINE('',#239122,#239123); +#239122 = CARTESIAN_POINT('',(127.466025,-52.129629,1.585)); +#239123 = VECTOR('',#239124,1.); +#239124 = DIRECTION('',(-0.447219314591,0.894424331432,0.)); +#239125 = ORIENTED_EDGE('',*,*,#239126,.T.); +#239126 = EDGE_CURVE('',#239119,#239076,#239127,.T.); +#239127 = LINE('',#239128,#239129); +#239128 = CARTESIAN_POINT('',(127.434746,-52.067072,1.585)); +#239129 = VECTOR('',#239130,1.); +#239130 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239131 = PLANE('',#239132); +#239132 = AXIS2_PLACEMENT_3D('',#239133,#239134,#239135); +#239133 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239134 = DIRECTION('',(0.,0.,1.)); +#239135 = DIRECTION('',(1.,0.,-0.)); +#239136 = SHELL_BASED_SURFACE_MODEL('',(#239137)); +#239137 = OPEN_SHELL('',(#239138)); +#239138 = ADVANCED_FACE('',(#239139,#239240),#239315,.T.); +#239139 = FACE_BOUND('',#239140,.F.); +#239140 = EDGE_LOOP('',(#239141,#239152,#239160,#239168,#239176,#239184, + #239192,#239201,#239209,#239218,#239226,#239234)); +#239141 = ORIENTED_EDGE('',*,*,#239142,.T.); +#239142 = EDGE_CURVE('',#239143,#239145,#239147,.T.); +#239143 = VERTEX_POINT('',#239144); +#239144 = CARTESIAN_POINT('',(139.80087,-51.776818,1.585)); +#239145 = VERTEX_POINT('',#239146); +#239146 = CARTESIAN_POINT('',(140.231693,-51.679409,1.585)); +#239147 = CIRCLE('',#239148,0.670538401945); +#239148 = AXIS2_PLACEMENT_3D('',#239149,#239150,#239151); +#239149 = CARTESIAN_POINT('',(140.15590657351,-52.34565082249,1.585)); +#239150 = DIRECTION('',(0.,0.,-1.)); +#239151 = DIRECTION('',(-0.529479851542,0.848322513441,0.)); +#239152 = ORIENTED_EDGE('',*,*,#239153,.T.); +#239153 = EDGE_CURVE('',#239145,#239154,#239156,.T.); +#239154 = VERTEX_POINT('',#239155); +#239155 = CARTESIAN_POINT('',(140.42438,-51.727575,1.585)); +#239156 = LINE('',#239157,#239158); +#239157 = CARTESIAN_POINT('',(140.231693,-51.679409,1.585)); +#239158 = VECTOR('',#239159,1.); +#239159 = DIRECTION('',(0.970149311613,-0.24250837754,0.)); +#239160 = ORIENTED_EDGE('',*,*,#239161,.T.); +#239161 = EDGE_CURVE('',#239154,#239162,#239164,.T.); +#239162 = VERTEX_POINT('',#239163); +#239163 = CARTESIAN_POINT('',(140.526987,-51.782608,1.585)); +#239164 = LINE('',#239165,#239166); +#239165 = CARTESIAN_POINT('',(140.42438,-51.727575,1.585)); +#239166 = VECTOR('',#239167,1.); +#239167 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#239168 = ORIENTED_EDGE('',*,*,#239169,.T.); +#239169 = EDGE_CURVE('',#239162,#239170,#239172,.T.); +#239170 = VERTEX_POINT('',#239171); +#239171 = CARTESIAN_POINT('',(140.620999,-51.880741,1.585)); +#239172 = LINE('',#239173,#239174); +#239173 = CARTESIAN_POINT('',(140.526987,-51.782608,1.585)); +#239174 = VECTOR('',#239175,1.); +#239175 = DIRECTION('',(0.691782130836,-0.722106282659,0.)); +#239176 = ORIENTED_EDGE('',*,*,#239177,.T.); +#239177 = EDGE_CURVE('',#239170,#239178,#239180,.T.); +#239178 = VERTEX_POINT('',#239179); +#239179 = CARTESIAN_POINT('',(140.672563,-52.032633,1.585)); +#239180 = LINE('',#239181,#239182); +#239181 = CARTESIAN_POINT('',(140.620999,-51.880741,1.585)); +#239182 = VECTOR('',#239183,1.); +#239183 = DIRECTION('',(0.321459666068,-0.946923272019,0.)); +#239184 = ORIENTED_EDGE('',*,*,#239185,.T.); +#239185 = EDGE_CURVE('',#239178,#239186,#239188,.T.); +#239186 = VERTEX_POINT('',#239187); +#239187 = CARTESIAN_POINT('',(140.674597,-52.257142,1.585)); +#239188 = LINE('',#239189,#239190); +#239189 = CARTESIAN_POINT('',(140.672563,-52.032633,1.585)); +#239190 = VECTOR('',#239191,1.); +#239191 = DIRECTION('',(9.059398644849E-03,-0.999958962806,0.)); +#239192 = ORIENTED_EDGE('',*,*,#239193,.T.); +#239193 = EDGE_CURVE('',#239186,#239194,#239196,.T.); +#239194 = VERTEX_POINT('',#239195); +#239195 = CARTESIAN_POINT('',(140.609597,-52.322142,1.585)); +#239196 = CIRCLE('',#239197,6.500103935393E-02); +#239197 = AXIS2_PLACEMENT_3D('',#239198,#239199,#239200); +#239198 = CARTESIAN_POINT('',(140.60959596065,-52.25714096065,1.585)); +#239199 = DIRECTION('',(0.,0.,-1.)); +#239200 = DIRECTION('',(0.999999999872,-1.598967692944E-05,0.)); +#239201 = ORIENTED_EDGE('',*,*,#239202,.T.); +#239202 = EDGE_CURVE('',#239194,#239203,#239205,.T.); +#239203 = VERTEX_POINT('',#239204); +#239204 = CARTESIAN_POINT('',(139.709597,-52.322142,1.585)); +#239205 = LINE('',#239206,#239207); +#239206 = CARTESIAN_POINT('',(140.609597,-52.322142,1.585)); +#239207 = VECTOR('',#239208,1.); +#239208 = DIRECTION('',(-1.,0.,0.)); +#239209 = ORIENTED_EDGE('',*,*,#239210,.T.); +#239210 = EDGE_CURVE('',#239203,#239211,#239213,.T.); +#239211 = VERTEX_POINT('',#239212); +#239212 = CARTESIAN_POINT('',(139.644597,-52.257142,1.585)); +#239213 = CIRCLE('',#239214,6.500103935387E-02); +#239214 = AXIS2_PLACEMENT_3D('',#239215,#239216,#239217); +#239215 = CARTESIAN_POINT('',(139.70959803934,-52.25714096065,1.585)); +#239216 = DIRECTION('',(0.,0.,-1.)); +#239217 = DIRECTION('',(-1.598967605495E-05,-0.999999999872,-0.)); +#239218 = ORIENTED_EDGE('',*,*,#239219,.T.); +#239219 = EDGE_CURVE('',#239211,#239220,#239222,.T.); +#239220 = VERTEX_POINT('',#239221); +#239221 = CARTESIAN_POINT('',(139.64663,-52.032633,1.585)); +#239222 = LINE('',#239223,#239224); +#239223 = CARTESIAN_POINT('',(139.644597,-52.257142,1.585)); +#239224 = VECTOR('',#239225,1.); +#239225 = DIRECTION('',(9.05494502838E-03,0.999959003145,0.)); +#239226 = ORIENTED_EDGE('',*,*,#239227,.T.); +#239227 = EDGE_CURVE('',#239220,#239228,#239230,.T.); +#239228 = VERTEX_POINT('',#239229); +#239229 = CARTESIAN_POINT('',(139.698191,-51.880745,1.585)); +#239230 = LINE('',#239231,#239232); +#239231 = CARTESIAN_POINT('',(139.64663,-52.032633,1.585)); +#239232 = VECTOR('',#239233,1.); +#239233 = DIRECTION('',(0.32145048656,0.946926388211,0.)); +#239234 = ORIENTED_EDGE('',*,*,#239235,.T.); +#239235 = EDGE_CURVE('',#239228,#239143,#239236,.T.); +#239236 = LINE('',#239237,#239238); +#239237 = CARTESIAN_POINT('',(139.698191,-51.880745,1.585)); +#239238 = VECTOR('',#239239,1.); +#239239 = DIRECTION('',(0.70282269282,0.711365069748,0.)); +#239240 = FACE_BOUND('',#239241,.F.); +#239241 = EDGE_LOOP('',(#239242,#239253,#239261,#239269,#239277,#239285, + #239293,#239301,#239309)); +#239242 = ORIENTED_EDGE('',*,*,#239243,.T.); +#239243 = EDGE_CURVE('',#239244,#239246,#239248,.T.); +#239244 = VERTEX_POINT('',#239245); +#239245 = CARTESIAN_POINT('',(140.372622,-51.847041,1.585)); +#239246 = VERTEX_POINT('',#239247); +#239247 = CARTESIAN_POINT('',(139.876669,-51.881991,1.585)); +#239248 = CIRCLE('',#239249,0.559258743581); +#239249 = AXIS2_PLACEMENT_3D('',#239250,#239251,#239252); +#239250 = CARTESIAN_POINT('',(140.15986183298,-52.36424836035,1.585)); +#239251 = DIRECTION('',(0.,0.,1.)); +#239252 = DIRECTION('',(0.380432437497,0.924808715627,-0.)); +#239253 = ORIENTED_EDGE('',*,*,#239254,.T.); +#239254 = EDGE_CURVE('',#239246,#239255,#239257,.T.); +#239255 = VERTEX_POINT('',#239256); +#239256 = CARTESIAN_POINT('',(139.809265,-51.949397,1.585)); +#239257 = LINE('',#239258,#239259); +#239258 = CARTESIAN_POINT('',(139.876669,-51.881991,1.585)); +#239259 = VECTOR('',#239260,1.); +#239260 = DIRECTION('',(-0.707096290688,-0.707117271529,0.)); +#239261 = ORIENTED_EDGE('',*,*,#239262,.T.); +#239262 = EDGE_CURVE('',#239255,#239263,#239265,.T.); +#239263 = VERTEX_POINT('',#239264); +#239264 = CARTESIAN_POINT('',(139.774597,-52.053403,1.585)); +#239265 = LINE('',#239266,#239267); +#239266 = CARTESIAN_POINT('',(139.809265,-51.949397,1.585)); +#239267 = VECTOR('',#239268,1.); +#239268 = DIRECTION('',(-0.316222293144,-0.948685122324,0.)); +#239269 = ORIENTED_EDGE('',*,*,#239270,.T.); +#239270 = EDGE_CURVE('',#239263,#239271,#239273,.T.); +#239271 = VERTEX_POINT('',#239272); +#239272 = CARTESIAN_POINT('',(139.774597,-52.192142,1.585)); +#239273 = LINE('',#239274,#239275); +#239274 = CARTESIAN_POINT('',(139.774597,-52.053403,1.585)); +#239275 = VECTOR('',#239276,1.); +#239276 = DIRECTION('',(0.,-1.,0.)); +#239277 = ORIENTED_EDGE('',*,*,#239278,.T.); +#239278 = EDGE_CURVE('',#239271,#239279,#239281,.T.); +#239279 = VERTEX_POINT('',#239280); +#239280 = CARTESIAN_POINT('',(140.544597,-52.192142,1.585)); +#239281 = LINE('',#239282,#239283); +#239282 = CARTESIAN_POINT('',(139.774597,-52.192142,1.585)); +#239283 = VECTOR('',#239284,1.); +#239284 = DIRECTION('',(1.,0.,0.)); +#239285 = ORIENTED_EDGE('',*,*,#239286,.T.); +#239286 = EDGE_CURVE('',#239279,#239287,#239289,.T.); +#239287 = VERTEX_POINT('',#239288); +#239288 = CARTESIAN_POINT('',(140.544597,-52.053403,1.585)); +#239289 = LINE('',#239290,#239291); +#239290 = CARTESIAN_POINT('',(140.544597,-52.192142,1.585)); +#239291 = VECTOR('',#239292,1.); +#239292 = DIRECTION('',(0.,1.,0.)); +#239293 = ORIENTED_EDGE('',*,*,#239294,.T.); +#239294 = EDGE_CURVE('',#239287,#239295,#239297,.T.); +#239295 = VERTEX_POINT('',#239296); +#239296 = CARTESIAN_POINT('',(140.509928,-51.949397,1.585)); +#239297 = LINE('',#239298,#239299); +#239298 = CARTESIAN_POINT('',(140.544597,-52.053403,1.585)); +#239299 = VECTOR('',#239300,1.); +#239300 = DIRECTION('',(-0.316230502442,0.948682385905,0.)); +#239301 = ORIENTED_EDGE('',*,*,#239302,.T.); +#239302 = EDGE_CURVE('',#239295,#239303,#239305,.T.); +#239303 = VERTEX_POINT('',#239304); +#239304 = CARTESIAN_POINT('',(140.442522,-51.881991,1.585)); +#239305 = LINE('',#239306,#239307); +#239306 = CARTESIAN_POINT('',(140.509928,-51.949397,1.585)); +#239307 = VECTOR('',#239308,1.); +#239308 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239309 = ORIENTED_EDGE('',*,*,#239310,.T.); +#239310 = EDGE_CURVE('',#239303,#239244,#239311,.T.); +#239311 = LINE('',#239312,#239313); +#239312 = CARTESIAN_POINT('',(140.442522,-51.881991,1.585)); +#239313 = VECTOR('',#239314,1.); +#239314 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#239315 = PLANE('',#239316); +#239316 = AXIS2_PLACEMENT_3D('',#239317,#239318,#239319); +#239317 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239318 = DIRECTION('',(0.,0.,1.)); +#239319 = DIRECTION('',(1.,0.,-0.)); +#239320 = SHELL_BASED_SURFACE_MODEL('',(#239321)); +#239321 = OPEN_SHELL('',(#239322)); +#239322 = ADVANCED_FACE('',(#239323),#239392,.T.); +#239323 = FACE_BOUND('',#239324,.F.); +#239324 = EDGE_LOOP('',(#239325,#239336,#239344,#239353,#239361,#239370, + #239378,#239386)); +#239325 = ORIENTED_EDGE('',*,*,#239326,.T.); +#239326 = EDGE_CURVE('',#239327,#239329,#239331,.T.); +#239327 = VERTEX_POINT('',#239328); +#239328 = CARTESIAN_POINT('',(122.749545,-51.553696,1.585)); +#239329 = VERTEX_POINT('',#239330); +#239330 = CARTESIAN_POINT('',(122.874597,-51.57857,1.585)); +#239331 = CIRCLE('',#239332,6.499988811648E-02); +#239332 = AXIS2_PLACEMENT_3D('',#239333,#239334,#239335); +#239333 = CARTESIAN_POINT('',(122.80959711188,-51.5785702701,1.585)); +#239334 = DIRECTION('',(0.,0.,-1.)); +#239335 = DIRECTION('',(-0.923880234632,0.382681737292,0.)); +#239336 = ORIENTED_EDGE('',*,*,#239337,.T.); +#239337 = EDGE_CURVE('',#239329,#239338,#239340,.T.); +#239338 = VERTEX_POINT('',#239339); +#239339 = CARTESIAN_POINT('',(122.874597,-52.007142,1.585)); +#239340 = LINE('',#239341,#239342); +#239341 = CARTESIAN_POINT('',(122.874597,-51.57857,1.585)); +#239342 = VECTOR('',#239343,1.); +#239343 = DIRECTION('',(0.,-1.,0.)); +#239344 = ORIENTED_EDGE('',*,*,#239345,.T.); +#239345 = EDGE_CURVE('',#239338,#239346,#239348,.T.); +#239346 = VERTEX_POINT('',#239347); +#239347 = CARTESIAN_POINT('',(122.809597,-52.072142,1.585)); +#239348 = CIRCLE('',#239349,6.500103935389E-02); +#239349 = AXIS2_PLACEMENT_3D('',#239350,#239351,#239352); +#239350 = CARTESIAN_POINT('',(122.80959596065,-52.00714096065,1.585)); +#239351 = DIRECTION('',(0.,0.,-1.)); +#239352 = DIRECTION('',(0.999999999872,-1.598967627357E-05,0.)); +#239353 = ORIENTED_EDGE('',*,*,#239354,.T.); +#239354 = EDGE_CURVE('',#239346,#239355,#239357,.T.); +#239355 = VERTEX_POINT('',#239356); +#239356 = CARTESIAN_POINT('',(121.909597,-52.072142,1.585)); +#239357 = LINE('',#239358,#239359); +#239358 = CARTESIAN_POINT('',(122.809597,-52.072142,1.585)); +#239359 = VECTOR('',#239360,1.); +#239360 = DIRECTION('',(-1.,0.,0.)); +#239361 = ORIENTED_EDGE('',*,*,#239362,.T.); +#239362 = EDGE_CURVE('',#239355,#239363,#239365,.T.); +#239363 = VERTEX_POINT('',#239364); +#239364 = CARTESIAN_POINT('',(121.909597,-51.942142,1.585)); +#239365 = CIRCLE('',#239366,6.500000000091E-02); +#239366 = AXIS2_PLACEMENT_3D('',#239367,#239368,#239369); +#239367 = CARTESIAN_POINT('',(121.90959734486,-52.007142,1.585)); +#239368 = DIRECTION('',(0.,0.,-1.)); +#239369 = DIRECTION('',(-5.305658025668E-06,-0.999999999986,-0.)); +#239370 = ORIENTED_EDGE('',*,*,#239371,.T.); +#239371 = EDGE_CURVE('',#239363,#239372,#239374,.T.); +#239372 = VERTEX_POINT('',#239373); +#239373 = CARTESIAN_POINT('',(122.744597,-51.942142,1.585)); +#239374 = LINE('',#239375,#239376); +#239375 = CARTESIAN_POINT('',(121.909597,-51.942142,1.585)); +#239376 = VECTOR('',#239377,1.); +#239377 = DIRECTION('',(1.,0.,0.)); +#239378 = ORIENTED_EDGE('',*,*,#239379,.T.); +#239379 = EDGE_CURVE('',#239372,#239380,#239382,.T.); +#239380 = VERTEX_POINT('',#239381); +#239381 = CARTESIAN_POINT('',(122.744597,-51.57857,1.585)); +#239382 = LINE('',#239383,#239384); +#239383 = CARTESIAN_POINT('',(122.744597,-51.942142,1.585)); +#239384 = VECTOR('',#239385,1.); +#239385 = DIRECTION('',(0.,1.,0.)); +#239386 = ORIENTED_EDGE('',*,*,#239387,.T.); +#239387 = EDGE_CURVE('',#239380,#239327,#239388,.T.); +#239388 = LINE('',#239389,#239390); +#239389 = CARTESIAN_POINT('',(122.744597,-51.57857,1.585)); +#239390 = VECTOR('',#239391,1.); +#239391 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#239392 = PLANE('',#239393); +#239393 = AXIS2_PLACEMENT_3D('',#239394,#239395,#239396); +#239394 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239395 = DIRECTION('',(0.,0.,1.)); +#239396 = DIRECTION('',(1.,0.,-0.)); +#239397 = SHELL_BASED_SURFACE_MODEL('',(#239398)); +#239398 = OPEN_SHELL('',(#239399)); +#239399 = ADVANCED_FACE('',(#239400),#239516,.T.); +#239400 = FACE_BOUND('',#239401,.F.); +#239401 = EDGE_LOOP('',(#239402,#239413,#239421,#239429,#239437,#239446, + #239454,#239462,#239470,#239478,#239486,#239494,#239502,#239510)); +#239402 = ORIENTED_EDGE('',*,*,#239403,.T.); +#239403 = EDGE_CURVE('',#239404,#239406,#239408,.T.); +#239404 = VERTEX_POINT('',#239405); +#239405 = CARTESIAN_POINT('',(183.086217,-49.850139,1.585)); +#239406 = VERTEX_POINT('',#239407); +#239407 = CARTESIAN_POINT('',(183.184076,-49.830674,1.585)); +#239408 = CIRCLE('',#239409,5.999850008894E-02); +#239409 = AXIS2_PLACEMENT_3D('',#239410,#239411,#239412); +#239410 = CARTESIAN_POINT('',(183.14164907544,-49.87309776793,1.585)); +#239411 = DIRECTION('',(0.,0.,-1.)); +#239412 = DIRECTION('',(-0.923891019961,0.382655698032,0.)); +#239413 = ORIENTED_EDGE('',*,*,#239414,.T.); +#239414 = EDGE_CURVE('',#239406,#239415,#239417,.T.); +#239415 = VERTEX_POINT('',#239416); +#239416 = CARTESIAN_POINT('',(185.266503,-51.9131,1.585)); +#239417 = LINE('',#239418,#239419); +#239418 = CARTESIAN_POINT('',(183.184076,-49.830674,1.585)); +#239419 = VECTOR('',#239420,1.); +#239420 = DIRECTION('',(0.707106950966,-0.707106611407,0.)); +#239421 = ORIENTED_EDGE('',*,*,#239422,.T.); +#239422 = EDGE_CURVE('',#239415,#239423,#239425,.T.); +#239423 = VERTEX_POINT('',#239424); +#239424 = CARTESIAN_POINT('',(189.316798,-51.9131,1.585)); +#239425 = LINE('',#239426,#239427); +#239426 = CARTESIAN_POINT('',(185.266503,-51.9131,1.585)); +#239427 = VECTOR('',#239428,1.); +#239428 = DIRECTION('',(1.,0.,0.)); +#239429 = ORIENTED_EDGE('',*,*,#239430,.T.); +#239430 = EDGE_CURVE('',#239423,#239431,#239433,.T.); +#239431 = VERTEX_POINT('',#239432); +#239432 = CARTESIAN_POINT('',(191.399223,-49.830674,1.585)); +#239433 = LINE('',#239434,#239435); +#239434 = CARTESIAN_POINT('',(189.316798,-51.9131,1.585)); +#239435 = VECTOR('',#239436,1.); +#239436 = DIRECTION('',(0.707106611407,0.707106950966,0.)); +#239437 = ORIENTED_EDGE('',*,*,#239438,.T.); +#239438 = EDGE_CURVE('',#239431,#239439,#239441,.T.); +#239439 = VERTEX_POINT('',#239440); +#239440 = CARTESIAN_POINT('',(191.484076,-49.915527,1.585)); +#239441 = CIRCLE('',#239442,6.000013170921E-02); +#239442 = AXIS2_PLACEMENT_3D('',#239443,#239444,#239445); +#239443 = CARTESIAN_POINT('',(191.4416500587,-49.87309994129,1.585)); +#239444 = DIRECTION('',(0.,0.,-1.)); +#239445 = DIRECTION('',(-0.707116092923,0.707097469327,0.)); +#239446 = ORIENTED_EDGE('',*,*,#239447,.T.); +#239447 = EDGE_CURVE('',#239439,#239448,#239450,.T.); +#239448 = VERTEX_POINT('',#239449); +#239449 = CARTESIAN_POINT('',(189.384076,-52.015526,1.585)); +#239450 = LINE('',#239451,#239452); +#239451 = CARTESIAN_POINT('',(191.484076,-49.915527,1.585)); +#239452 = VECTOR('',#239453,1.); +#239453 = DIRECTION('',(-0.707106949545,-0.707106612828,0.)); +#239454 = ORIENTED_EDGE('',*,*,#239455,.T.); +#239455 = EDGE_CURVE('',#239448,#239456,#239458,.T.); +#239456 = VERTEX_POINT('',#239457); +#239457 = CARTESIAN_POINT('',(189.364611,-52.028533,1.585)); +#239458 = LINE('',#239459,#239460); +#239459 = CARTESIAN_POINT('',(189.384076,-52.015526,1.585)); +#239460 = VECTOR('',#239461,1.); +#239461 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#239462 = ORIENTED_EDGE('',*,*,#239463,.T.); +#239463 = EDGE_CURVE('',#239456,#239464,#239466,.T.); +#239464 = VERTEX_POINT('',#239465); +#239465 = CARTESIAN_POINT('',(189.34165,-52.0331,1.585)); +#239466 = LINE('',#239467,#239468); +#239467 = CARTESIAN_POINT('',(189.364611,-52.028533,1.585)); +#239468 = VECTOR('',#239469,1.); +#239469 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#239470 = ORIENTED_EDGE('',*,*,#239471,.T.); +#239471 = EDGE_CURVE('',#239464,#239472,#239474,.T.); +#239472 = VERTEX_POINT('',#239473); +#239473 = CARTESIAN_POINT('',(185.24165,-52.0331,1.585)); +#239474 = LINE('',#239475,#239476); +#239475 = CARTESIAN_POINT('',(189.34165,-52.0331,1.585)); +#239476 = VECTOR('',#239477,1.); +#239477 = DIRECTION('',(-1.,0.,0.)); +#239478 = ORIENTED_EDGE('',*,*,#239479,.T.); +#239479 = EDGE_CURVE('',#239472,#239480,#239482,.T.); +#239480 = VERTEX_POINT('',#239481); +#239481 = CARTESIAN_POINT('',(185.218688,-52.028533,1.585)); +#239482 = LINE('',#239483,#239484); +#239483 = CARTESIAN_POINT('',(185.24165,-52.0331,1.585)); +#239484 = VECTOR('',#239485,1.); +#239485 = DIRECTION('',(-0.980788760097,0.1950728276,0.)); +#239486 = ORIENTED_EDGE('',*,*,#239487,.T.); +#239487 = EDGE_CURVE('',#239480,#239488,#239490,.T.); +#239488 = VERTEX_POINT('',#239489); +#239489 = CARTESIAN_POINT('',(185.199223,-52.015526,1.585)); +#239490 = LINE('',#239491,#239492); +#239491 = CARTESIAN_POINT('',(185.218688,-52.028533,1.585)); +#239492 = VECTOR('',#239493,1.); +#239493 = DIRECTION('',(-0.831451797698,0.555596893535,0.)); +#239494 = ORIENTED_EDGE('',*,*,#239495,.T.); +#239495 = EDGE_CURVE('',#239488,#239496,#239498,.T.); +#239496 = VERTEX_POINT('',#239497); +#239497 = CARTESIAN_POINT('',(183.099224,-49.915526,1.585)); +#239498 = LINE('',#239499,#239500); +#239499 = CARTESIAN_POINT('',(185.199223,-52.015526,1.585)); +#239500 = VECTOR('',#239501,1.); +#239501 = DIRECTION('',(-0.707106612828,0.707106949545,0.)); +#239502 = ORIENTED_EDGE('',*,*,#239503,.T.); +#239503 = EDGE_CURVE('',#239496,#239504,#239506,.T.); +#239504 = VERTEX_POINT('',#239505); +#239505 = CARTESIAN_POINT('',(183.086217,-49.896061,1.585)); +#239506 = LINE('',#239507,#239508); +#239507 = CARTESIAN_POINT('',(183.099224,-49.915526,1.585)); +#239508 = VECTOR('',#239509,1.); +#239509 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#239510 = ORIENTED_EDGE('',*,*,#239511,.T.); +#239511 = EDGE_CURVE('',#239504,#239404,#239512,.T.); +#239512 = LINE('',#239513,#239514); +#239513 = CARTESIAN_POINT('',(183.086217,-49.896061,1.585)); +#239514 = VECTOR('',#239515,1.); +#239515 = DIRECTION('',(0.,1.,0.)); +#239516 = PLANE('',#239517); +#239517 = AXIS2_PLACEMENT_3D('',#239518,#239519,#239520); +#239518 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239519 = DIRECTION('',(0.,0.,1.)); +#239520 = DIRECTION('',(1.,0.,-0.)); +#239521 = SHELL_BASED_SURFACE_MODEL('',(#239522)); +#239522 = OPEN_SHELL('',(#239523)); +#239523 = ADVANCED_FACE('',(#239524),#239560,.T.); +#239524 = FACE_BOUND('',#239525,.F.); +#239525 = EDGE_LOOP('',(#239526,#239537,#239545,#239554)); +#239526 = ORIENTED_EDGE('',*,*,#239527,.T.); +#239527 = EDGE_CURVE('',#239528,#239530,#239532,.T.); +#239528 = VERTEX_POINT('',#239529); +#239529 = CARTESIAN_POINT('',(179.480398,-52.0181,1.585)); +#239530 = VERTEX_POINT('',#239531); +#239531 = CARTESIAN_POINT('',(179.480398,-51.8981,1.585)); +#239532 = CIRCLE('',#239533,6.000000000042E-02); +#239533 = AXIS2_PLACEMENT_3D('',#239534,#239535,#239536); +#239534 = CARTESIAN_POINT('',(179.48039777441,-51.9581,1.585)); +#239535 = DIRECTION('',(0.,0.,-1.)); +#239536 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#239537 = ORIENTED_EDGE('',*,*,#239538,.T.); +#239538 = EDGE_CURVE('',#239530,#239539,#239541,.T.); +#239539 = VERTEX_POINT('',#239540); +#239540 = CARTESIAN_POINT('',(180.002902,-51.8981,1.585)); +#239541 = LINE('',#239542,#239543); +#239542 = CARTESIAN_POINT('',(179.480398,-51.8981,1.585)); +#239543 = VECTOR('',#239544,1.); +#239544 = DIRECTION('',(1.,0.,0.)); +#239545 = ORIENTED_EDGE('',*,*,#239546,.T.); +#239546 = EDGE_CURVE('',#239539,#239547,#239549,.T.); +#239547 = VERTEX_POINT('',#239548); +#239548 = CARTESIAN_POINT('',(180.002902,-52.0181,1.585)); +#239549 = CIRCLE('',#239550,6.000000000043E-02); +#239550 = AXIS2_PLACEMENT_3D('',#239551,#239552,#239553); +#239551 = CARTESIAN_POINT('',(180.00290222558,-51.9581,1.585)); +#239552 = DIRECTION('',(0.,0.,-1.)); +#239553 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#239554 = ORIENTED_EDGE('',*,*,#239555,.T.); +#239555 = EDGE_CURVE('',#239547,#239528,#239556,.T.); +#239556 = LINE('',#239557,#239558); +#239557 = CARTESIAN_POINT('',(180.002902,-52.0181,1.585)); +#239558 = VECTOR('',#239559,1.); +#239559 = DIRECTION('',(-1.,0.,0.)); +#239560 = PLANE('',#239561); +#239561 = AXIS2_PLACEMENT_3D('',#239562,#239563,#239564); +#239562 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239563 = DIRECTION('',(0.,0.,1.)); +#239564 = DIRECTION('',(1.,0.,-0.)); +#239565 = SHELL_BASED_SURFACE_MODEL('',(#239566)); +#239566 = OPEN_SHELL('',(#239567)); +#239567 = ADVANCED_FACE('',(#239568),#239645,.T.); +#239568 = FACE_BOUND('',#239569,.F.); +#239569 = EDGE_LOOP('',(#239570,#239581,#239589,#239597,#239606,#239614, + #239622,#239631,#239639)); +#239570 = ORIENTED_EDGE('',*,*,#239571,.T.); +#239571 = EDGE_CURVE('',#239572,#239574,#239576,.T.); +#239572 = VERTEX_POINT('',#239573); +#239573 = CARTESIAN_POINT('',(116.799545,-51.417983,1.585)); +#239574 = VERTEX_POINT('',#239575); +#239575 = CARTESIAN_POINT('',(116.924597,-51.442857,1.585)); +#239576 = CIRCLE('',#239577,6.499988811649E-02); +#239577 = AXIS2_PLACEMENT_3D('',#239578,#239579,#239580); +#239578 = CARTESIAN_POINT('',(116.85959711188,-51.4428572701,1.585)); +#239579 = DIRECTION('',(0.,0.,-1.)); +#239580 = DIRECTION('',(-0.923880234631,0.382681737293,0.)); +#239581 = ORIENTED_EDGE('',*,*,#239582,.T.); +#239582 = EDGE_CURVE('',#239574,#239583,#239585,.T.); +#239583 = VERTEX_POINT('',#239584); +#239584 = CARTESIAN_POINT('',(116.924597,-51.634999,1.585)); +#239585 = LINE('',#239586,#239587); +#239586 = CARTESIAN_POINT('',(116.924597,-51.442857,1.585)); +#239587 = VECTOR('',#239588,1.); +#239588 = DIRECTION('',(0.,-1.,0.)); +#239589 = ORIENTED_EDGE('',*,*,#239590,.T.); +#239590 = EDGE_CURVE('',#239583,#239591,#239593,.T.); +#239591 = VERTEX_POINT('',#239592); +#239592 = CARTESIAN_POINT('',(117.759597,-51.634999,1.585)); +#239593 = LINE('',#239594,#239595); +#239594 = CARTESIAN_POINT('',(116.924597,-51.634999,1.585)); +#239595 = VECTOR('',#239596,1.); +#239596 = DIRECTION('',(1.,0.,0.)); +#239597 = ORIENTED_EDGE('',*,*,#239598,.T.); +#239598 = EDGE_CURVE('',#239591,#239599,#239601,.T.); +#239599 = VERTEX_POINT('',#239600); +#239600 = CARTESIAN_POINT('',(117.759597,-51.764999,1.585)); +#239601 = CIRCLE('',#239602,6.500000000091E-02); +#239602 = AXIS2_PLACEMENT_3D('',#239603,#239604,#239605); +#239603 = CARTESIAN_POINT('',(117.75959665513,-51.699999,1.585)); +#239604 = DIRECTION('',(0.,0.,-1.)); +#239605 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#239606 = ORIENTED_EDGE('',*,*,#239607,.T.); +#239607 = EDGE_CURVE('',#239599,#239608,#239610,.T.); +#239608 = VERTEX_POINT('',#239609); +#239609 = CARTESIAN_POINT('',(116.924597,-51.764999,1.585)); +#239610 = LINE('',#239611,#239612); +#239611 = CARTESIAN_POINT('',(117.759597,-51.764999,1.585)); +#239612 = VECTOR('',#239613,1.); +#239613 = DIRECTION('',(-1.,0.,0.)); +#239614 = ORIENTED_EDGE('',*,*,#239615,.T.); +#239615 = EDGE_CURVE('',#239608,#239616,#239618,.T.); +#239616 = VERTEX_POINT('',#239617); +#239617 = CARTESIAN_POINT('',(116.924597,-51.957142,1.585)); +#239618 = LINE('',#239619,#239620); +#239619 = CARTESIAN_POINT('',(116.924597,-51.764999,1.585)); +#239620 = VECTOR('',#239621,1.); +#239621 = DIRECTION('',(0.,-1.,0.)); +#239622 = ORIENTED_EDGE('',*,*,#239623,.T.); +#239623 = EDGE_CURVE('',#239616,#239624,#239626,.T.); +#239624 = VERTEX_POINT('',#239625); +#239625 = CARTESIAN_POINT('',(116.794597,-51.957142,1.585)); +#239626 = CIRCLE('',#239627,6.500000000092E-02); +#239627 = AXIS2_PLACEMENT_3D('',#239628,#239629,#239630); +#239628 = CARTESIAN_POINT('',(116.859597,-51.95714165513,1.585)); +#239629 = DIRECTION('',(-0.,0.,-1.)); +#239630 = DIRECTION('',(0.999999999986,-5.305658244297E-06,-0.)); +#239631 = ORIENTED_EDGE('',*,*,#239632,.T.); +#239632 = EDGE_CURVE('',#239624,#239633,#239635,.T.); +#239633 = VERTEX_POINT('',#239634); +#239634 = CARTESIAN_POINT('',(116.794597,-51.442857,1.585)); +#239635 = LINE('',#239636,#239637); +#239636 = CARTESIAN_POINT('',(116.794597,-51.957142,1.585)); +#239637 = VECTOR('',#239638,1.); +#239638 = DIRECTION('',(0.,1.,0.)); +#239639 = ORIENTED_EDGE('',*,*,#239640,.T.); +#239640 = EDGE_CURVE('',#239633,#239572,#239641,.T.); +#239641 = LINE('',#239642,#239643); +#239642 = CARTESIAN_POINT('',(116.794597,-51.442857,1.585)); +#239643 = VECTOR('',#239644,1.); +#239644 = DIRECTION('',(0.195099947481,0.98078336573,0.)); +#239645 = PLANE('',#239646); +#239646 = AXIS2_PLACEMENT_3D('',#239647,#239648,#239649); +#239647 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239648 = DIRECTION('',(0.,0.,1.)); +#239649 = DIRECTION('',(1.,0.,-0.)); +#239650 = SHELL_BASED_SURFACE_MODEL('',(#239651)); +#239651 = OPEN_SHELL('',(#239652)); +#239652 = ADVANCED_FACE('',(#239653),#239811,.T.); +#239653 = FACE_BOUND('',#239654,.F.); +#239654 = EDGE_LOOP('',(#239655,#239666,#239674,#239683,#239691,#239699, + #239707,#239715,#239724,#239732,#239740,#239748,#239757,#239765, + #239773,#239781,#239789,#239797,#239805)); +#239655 = ORIENTED_EDGE('',*,*,#239656,.T.); +#239656 = EDGE_CURVE('',#239657,#239659,#239661,.T.); +#239657 = VERTEX_POINT('',#239658); +#239658 = CARTESIAN_POINT('',(151.22165,-45.1131,1.585)); +#239659 = VERTEX_POINT('',#239660); +#239660 = CARTESIAN_POINT('',(151.28165,-45.0531,1.585)); +#239661 = CIRCLE('',#239662,5.999932016255E-02); +#239662 = AXIS2_PLACEMENT_3D('',#239663,#239664,#239665); +#239663 = CARTESIAN_POINT('',(151.28164932015,-45.11309932015,1.585)); +#239664 = DIRECTION('',(0.,0.,-1.)); +#239665 = DIRECTION('',(-0.999999999936,-1.133081695041E-05,-0.)); +#239666 = ORIENTED_EDGE('',*,*,#239667,.T.); +#239667 = EDGE_CURVE('',#239659,#239668,#239670,.T.); +#239668 = VERTEX_POINT('',#239669); +#239669 = CARTESIAN_POINT('',(153.63165,-45.0531,1.585)); +#239670 = LINE('',#239671,#239672); +#239671 = CARTESIAN_POINT('',(151.28165,-45.0531,1.585)); +#239672 = VECTOR('',#239673,1.); +#239673 = DIRECTION('',(1.,0.,0.)); +#239674 = ORIENTED_EDGE('',*,*,#239675,.T.); +#239675 = EDGE_CURVE('',#239668,#239676,#239678,.T.); +#239676 = VERTEX_POINT('',#239677); +#239677 = CARTESIAN_POINT('',(153.63165,-45.1731,1.585)); +#239678 = CIRCLE('',#239679,6.000000000043E-02); +#239679 = AXIS2_PLACEMENT_3D('',#239680,#239681,#239682); +#239680 = CARTESIAN_POINT('',(153.63165022558,-45.1131,1.585)); +#239681 = DIRECTION('',(0.,0.,-1.)); +#239682 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#239683 = ORIENTED_EDGE('',*,*,#239684,.T.); +#239684 = EDGE_CURVE('',#239676,#239685,#239687,.T.); +#239685 = VERTEX_POINT('',#239686); +#239686 = CARTESIAN_POINT('',(151.34165,-45.1731,1.585)); +#239687 = LINE('',#239688,#239689); +#239688 = CARTESIAN_POINT('',(153.63165,-45.1731,1.585)); +#239689 = VECTOR('',#239690,1.); +#239690 = DIRECTION('',(-1.,0.,0.)); +#239691 = ORIENTED_EDGE('',*,*,#239692,.T.); +#239692 = EDGE_CURVE('',#239685,#239693,#239695,.T.); +#239693 = VERTEX_POINT('',#239694); +#239694 = CARTESIAN_POINT('',(151.34165,-50.84381,1.585)); +#239695 = LINE('',#239696,#239697); +#239696 = CARTESIAN_POINT('',(151.34165,-45.1731,1.585)); +#239697 = VECTOR('',#239698,1.); +#239698 = DIRECTION('',(0.,-1.,0.)); +#239699 = ORIENTED_EDGE('',*,*,#239700,.T.); +#239700 = EDGE_CURVE('',#239693,#239701,#239703,.T.); +#239701 = VERTEX_POINT('',#239702); +#239702 = CARTESIAN_POINT('',(152.069832,-51.571992,1.585)); +#239703 = LINE('',#239704,#239705); +#239704 = CARTESIAN_POINT('',(151.34165,-50.84381,1.585)); +#239705 = VECTOR('',#239706,1.); +#239706 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#239707 = ORIENTED_EDGE('',*,*,#239708,.T.); +#239708 = EDGE_CURVE('',#239701,#239709,#239711,.T.); +#239709 = VERTEX_POINT('',#239710); +#239710 = CARTESIAN_POINT('',(152.069832,-51.579764,1.585)); +#239711 = LINE('',#239712,#239713); +#239712 = CARTESIAN_POINT('',(152.069832,-51.571992,1.585)); +#239713 = VECTOR('',#239714,1.); +#239714 = DIRECTION('',(0.,-1.,0.)); +#239715 = ORIENTED_EDGE('',*,*,#239716,.T.); +#239716 = EDGE_CURVE('',#239709,#239717,#239719,.T.); +#239717 = VERTEX_POINT('',#239718); +#239718 = CARTESIAN_POINT('',(152.187686,-51.697618,1.585)); +#239719 = CIRCLE('',#239720,0.150002525551); +#239720 = AXIS2_PLACEMENT_3D('',#239721,#239722,#239723); +#239721 = CARTESIAN_POINT('',(152.21695189941,-51.55049810058,1.585)); +#239722 = DIRECTION('',(0.,0.,1.)); +#239723 = DIRECTION('',(-0.980782815972,-0.19510271114,0.)); +#239724 = ORIENTED_EDGE('',*,*,#239725,.T.); +#239725 = EDGE_CURVE('',#239717,#239726,#239728,.T.); +#239726 = VERTEX_POINT('',#239727); +#239727 = CARTESIAN_POINT('',(152.196307,-51.698467,1.585)); +#239728 = LINE('',#239729,#239730); +#239729 = CARTESIAN_POINT('',(152.187686,-51.697618,1.585)); +#239730 = VECTOR('',#239731,1.); +#239731 = DIRECTION('',(0.99518578946,-9.800634906117E-02,0.)); +#239732 = ORIENTED_EDGE('',*,*,#239733,.T.); +#239733 = EDGE_CURVE('',#239726,#239734,#239736,.T.); +#239734 = VERTEX_POINT('',#239735); +#239735 = CARTESIAN_POINT('',(152.37094,-51.8731,1.585)); +#239736 = LINE('',#239737,#239738); +#239737 = CARTESIAN_POINT('',(152.196307,-51.698467,1.585)); +#239738 = VECTOR('',#239739,1.); +#239739 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#239740 = ORIENTED_EDGE('',*,*,#239741,.T.); +#239741 = EDGE_CURVE('',#239734,#239742,#239744,.T.); +#239742 = VERTEX_POINT('',#239743); +#239743 = CARTESIAN_POINT('',(153.63165,-51.8731,1.585)); +#239744 = LINE('',#239745,#239746); +#239745 = CARTESIAN_POINT('',(152.37094,-51.8731,1.585)); +#239746 = VECTOR('',#239747,1.); +#239747 = DIRECTION('',(1.,0.,0.)); +#239748 = ORIENTED_EDGE('',*,*,#239749,.T.); +#239749 = EDGE_CURVE('',#239742,#239750,#239752,.T.); +#239750 = VERTEX_POINT('',#239751); +#239751 = CARTESIAN_POINT('',(153.63165,-51.9931,1.585)); +#239752 = CIRCLE('',#239753,6.000000000042E-02); +#239753 = AXIS2_PLACEMENT_3D('',#239754,#239755,#239756); +#239754 = CARTESIAN_POINT('',(153.63165022558,-51.9331,1.585)); +#239755 = DIRECTION('',(0.,0.,-1.)); +#239756 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#239757 = ORIENTED_EDGE('',*,*,#239758,.T.); +#239758 = EDGE_CURVE('',#239750,#239759,#239761,.T.); +#239759 = VERTEX_POINT('',#239760); +#239760 = CARTESIAN_POINT('',(152.346087,-51.9931,1.585)); +#239761 = LINE('',#239762,#239763); +#239762 = CARTESIAN_POINT('',(153.63165,-51.9931,1.585)); +#239763 = VECTOR('',#239764,1.); +#239764 = DIRECTION('',(-1.,0.,0.)); +#239765 = ORIENTED_EDGE('',*,*,#239766,.T.); +#239766 = EDGE_CURVE('',#239759,#239767,#239769,.T.); +#239767 = VERTEX_POINT('',#239768); +#239768 = CARTESIAN_POINT('',(152.323126,-51.988533,1.585)); +#239769 = LINE('',#239770,#239771); +#239770 = CARTESIAN_POINT('',(152.346087,-51.9931,1.585)); +#239771 = VECTOR('',#239772,1.); +#239772 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#239773 = ORIENTED_EDGE('',*,*,#239774,.T.); +#239774 = EDGE_CURVE('',#239767,#239775,#239777,.T.); +#239775 = VERTEX_POINT('',#239776); +#239776 = CARTESIAN_POINT('',(152.30366,-51.975526,1.585)); +#239777 = LINE('',#239778,#239779); +#239778 = CARTESIAN_POINT('',(152.323126,-51.988533,1.585)); +#239779 = VECTOR('',#239780,1.); +#239780 = DIRECTION('',(-0.831464982668,0.555577161695,0.)); +#239781 = ORIENTED_EDGE('',*,*,#239782,.T.); +#239782 = EDGE_CURVE('',#239775,#239783,#239785,.T.); +#239783 = VERTEX_POINT('',#239784); +#239784 = CARTESIAN_POINT('',(151.239224,-50.911089,1.585)); +#239785 = LINE('',#239786,#239787); +#239786 = CARTESIAN_POINT('',(152.30366,-51.975526,1.585)); +#239787 = VECTOR('',#239788,1.); +#239788 = DIRECTION('',(-0.707106449036,0.707107113337,0.)); +#239789 = ORIENTED_EDGE('',*,*,#239790,.T.); +#239790 = EDGE_CURVE('',#239783,#239791,#239793,.T.); +#239791 = VERTEX_POINT('',#239792); +#239792 = CARTESIAN_POINT('',(151.226217,-50.891624,1.585)); +#239793 = LINE('',#239794,#239795); +#239794 = CARTESIAN_POINT('',(151.239224,-50.911089,1.585)); +#239795 = VECTOR('',#239796,1.); +#239796 = DIRECTION('',(-0.555596893535,0.831451797697,0.)); +#239797 = ORIENTED_EDGE('',*,*,#239798,.T.); +#239798 = EDGE_CURVE('',#239791,#239799,#239801,.T.); +#239799 = VERTEX_POINT('',#239800); +#239800 = CARTESIAN_POINT('',(151.22165,-50.868663,1.585)); +#239801 = LINE('',#239802,#239803); +#239802 = CARTESIAN_POINT('',(151.226217,-50.891624,1.585)); +#239803 = VECTOR('',#239804,1.); +#239804 = DIRECTION('',(-0.195081000117,0.980787134598,0.)); +#239805 = ORIENTED_EDGE('',*,*,#239806,.T.); +#239806 = EDGE_CURVE('',#239799,#239657,#239807,.T.); +#239807 = LINE('',#239808,#239809); +#239808 = CARTESIAN_POINT('',(151.22165,-50.868663,1.585)); +#239809 = VECTOR('',#239810,1.); +#239810 = DIRECTION('',(0.,1.,0.)); +#239811 = PLANE('',#239812); +#239812 = AXIS2_PLACEMENT_3D('',#239813,#239814,#239815); +#239813 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239814 = DIRECTION('',(0.,0.,1.)); +#239815 = DIRECTION('',(1.,0.,-0.)); +#239816 = SHELL_BASED_SURFACE_MODEL('',(#239817)); +#239817 = OPEN_SHELL('',(#239818)); +#239818 = ADVANCED_FACE('',(#239819),#239944,.T.); +#239819 = FACE_BOUND('',#239820,.F.); +#239820 = EDGE_LOOP('',(#239821,#239832,#239840,#239849,#239857,#239865, + #239873,#239881,#239889,#239897,#239905,#239914,#239922,#239930, + #239938)); +#239821 = ORIENTED_EDGE('',*,*,#239822,.T.); +#239822 = EDGE_CURVE('',#239823,#239825,#239827,.T.); +#239823 = VERTEX_POINT('',#239824); +#239824 = CARTESIAN_POINT('',(155.75165,-45.1731,1.585)); +#239825 = VERTEX_POINT('',#239826); +#239826 = CARTESIAN_POINT('',(155.75165,-45.0531,1.585)); +#239827 = CIRCLE('',#239828,6.000000000042E-02); +#239828 = AXIS2_PLACEMENT_3D('',#239829,#239830,#239831); +#239829 = CARTESIAN_POINT('',(155.75164977441,-45.1131,1.585)); +#239830 = DIRECTION('',(0.,0.,-1.)); +#239831 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#239832 = ORIENTED_EDGE('',*,*,#239833,.T.); +#239833 = EDGE_CURVE('',#239825,#239834,#239836,.T.); +#239834 = VERTEX_POINT('',#239835); +#239835 = CARTESIAN_POINT('',(158.10165,-45.0531,1.585)); +#239836 = LINE('',#239837,#239838); +#239837 = CARTESIAN_POINT('',(155.75165,-45.0531,1.585)); +#239838 = VECTOR('',#239839,1.); +#239839 = DIRECTION('',(1.,0.,0.)); +#239840 = ORIENTED_EDGE('',*,*,#239841,.T.); +#239841 = EDGE_CURVE('',#239834,#239842,#239844,.T.); +#239842 = VERTEX_POINT('',#239843); +#239843 = CARTESIAN_POINT('',(158.16165,-45.1131,1.585)); +#239844 = CIRCLE('',#239845,5.999932016261E-02); +#239845 = AXIS2_PLACEMENT_3D('',#239846,#239847,#239848); +#239846 = CARTESIAN_POINT('',(158.10165067984,-45.11309932015,1.585)); +#239847 = DIRECTION('',(0.,0.,-1.)); +#239848 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#239849 = ORIENTED_EDGE('',*,*,#239850,.T.); +#239850 = EDGE_CURVE('',#239842,#239851,#239853,.T.); +#239851 = VERTEX_POINT('',#239852); +#239852 = CARTESIAN_POINT('',(158.16165,-50.868663,1.585)); +#239853 = LINE('',#239854,#239855); +#239854 = CARTESIAN_POINT('',(158.16165,-45.1131,1.585)); +#239855 = VECTOR('',#239856,1.); +#239856 = DIRECTION('',(0.,-1.,0.)); +#239857 = ORIENTED_EDGE('',*,*,#239858,.T.); +#239858 = EDGE_CURVE('',#239851,#239859,#239861,.T.); +#239859 = VERTEX_POINT('',#239860); +#239860 = CARTESIAN_POINT('',(158.157083,-50.891624,1.585)); +#239861 = LINE('',#239862,#239863); +#239862 = CARTESIAN_POINT('',(158.16165,-50.868663,1.585)); +#239863 = VECTOR('',#239864,1.); +#239864 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#239865 = ORIENTED_EDGE('',*,*,#239866,.T.); +#239866 = EDGE_CURVE('',#239859,#239867,#239869,.T.); +#239867 = VERTEX_POINT('',#239868); +#239868 = CARTESIAN_POINT('',(158.144076,-50.91109,1.585)); +#239869 = LINE('',#239870,#239871); +#239870 = CARTESIAN_POINT('',(158.157083,-50.891624,1.585)); +#239871 = VECTOR('',#239872,1.); +#239872 = DIRECTION('',(-0.555577161695,-0.831464982668,0.)); +#239873 = ORIENTED_EDGE('',*,*,#239874,.T.); +#239874 = EDGE_CURVE('',#239867,#239875,#239877,.T.); +#239875 = VERTEX_POINT('',#239876); +#239876 = CARTESIAN_POINT('',(157.079639,-51.975526,1.585)); +#239877 = LINE('',#239878,#239879); +#239878 = CARTESIAN_POINT('',(158.144076,-50.91109,1.585)); +#239879 = VECTOR('',#239880,1.); +#239880 = DIRECTION('',(-0.707107113337,-0.707106449036,0.)); +#239881 = ORIENTED_EDGE('',*,*,#239882,.T.); +#239882 = EDGE_CURVE('',#239875,#239883,#239885,.T.); +#239883 = VERTEX_POINT('',#239884); +#239884 = CARTESIAN_POINT('',(157.060174,-51.988533,1.585)); +#239885 = LINE('',#239886,#239887); +#239886 = CARTESIAN_POINT('',(157.079639,-51.975526,1.585)); +#239887 = VECTOR('',#239888,1.); +#239888 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#239889 = ORIENTED_EDGE('',*,*,#239890,.T.); +#239890 = EDGE_CURVE('',#239883,#239891,#239893,.T.); +#239891 = VERTEX_POINT('',#239892); +#239892 = CARTESIAN_POINT('',(157.037213,-51.9931,1.585)); +#239893 = LINE('',#239894,#239895); +#239894 = CARTESIAN_POINT('',(157.060174,-51.988533,1.585)); +#239895 = VECTOR('',#239896,1.); +#239896 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#239897 = ORIENTED_EDGE('',*,*,#239898,.T.); +#239898 = EDGE_CURVE('',#239891,#239899,#239901,.T.); +#239899 = VERTEX_POINT('',#239900); +#239900 = CARTESIAN_POINT('',(155.75165,-51.9931,1.585)); +#239901 = LINE('',#239902,#239903); +#239902 = CARTESIAN_POINT('',(157.037213,-51.9931,1.585)); +#239903 = VECTOR('',#239904,1.); +#239904 = DIRECTION('',(-1.,0.,0.)); +#239905 = ORIENTED_EDGE('',*,*,#239906,.T.); +#239906 = EDGE_CURVE('',#239899,#239907,#239909,.T.); +#239907 = VERTEX_POINT('',#239908); +#239908 = CARTESIAN_POINT('',(155.75165,-51.8731,1.585)); +#239909 = CIRCLE('',#239910,6.000000000042E-02); +#239910 = AXIS2_PLACEMENT_3D('',#239911,#239912,#239913); +#239911 = CARTESIAN_POINT('',(155.75164977441,-51.9331,1.585)); +#239912 = DIRECTION('',(0.,0.,-1.)); +#239913 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#239914 = ORIENTED_EDGE('',*,*,#239915,.T.); +#239915 = EDGE_CURVE('',#239907,#239916,#239918,.T.); +#239916 = VERTEX_POINT('',#239917); +#239917 = CARTESIAN_POINT('',(157.012361,-51.8731,1.585)); +#239918 = LINE('',#239919,#239920); +#239919 = CARTESIAN_POINT('',(155.75165,-51.8731,1.585)); +#239920 = VECTOR('',#239921,1.); +#239921 = DIRECTION('',(1.,0.,0.)); +#239922 = ORIENTED_EDGE('',*,*,#239923,.T.); +#239923 = EDGE_CURVE('',#239916,#239924,#239926,.T.); +#239924 = VERTEX_POINT('',#239925); +#239925 = CARTESIAN_POINT('',(158.04165,-50.84381,1.585)); +#239926 = LINE('',#239927,#239928); +#239927 = CARTESIAN_POINT('',(157.012361,-51.8731,1.585)); +#239928 = VECTOR('',#239929,1.); +#239929 = DIRECTION('',(0.707106437694,0.707107124679,0.)); +#239930 = ORIENTED_EDGE('',*,*,#239931,.T.); +#239931 = EDGE_CURVE('',#239924,#239932,#239934,.T.); +#239932 = VERTEX_POINT('',#239933); +#239933 = CARTESIAN_POINT('',(158.04165,-45.1731,1.585)); +#239934 = LINE('',#239935,#239936); +#239935 = CARTESIAN_POINT('',(158.04165,-50.84381,1.585)); +#239936 = VECTOR('',#239937,1.); +#239937 = DIRECTION('',(0.,1.,0.)); +#239938 = ORIENTED_EDGE('',*,*,#239939,.T.); +#239939 = EDGE_CURVE('',#239932,#239823,#239940,.T.); +#239940 = LINE('',#239941,#239942); +#239941 = CARTESIAN_POINT('',(158.04165,-45.1731,1.585)); +#239942 = VECTOR('',#239943,1.); +#239943 = DIRECTION('',(-1.,0.,0.)); +#239944 = PLANE('',#239945); +#239945 = AXIS2_PLACEMENT_3D('',#239946,#239947,#239948); +#239946 = CARTESIAN_POINT('',(0.,0.,1.585)); +#239947 = DIRECTION('',(0.,0.,1.)); +#239948 = DIRECTION('',(1.,0.,-0.)); +#239949 = SHELL_BASED_SURFACE_MODEL('',(#239950)); +#239950 = OPEN_SHELL('',(#239951)); +#239951 = ADVANCED_FACE('',(#239952),#240054,.T.); +#239952 = FACE_BOUND('',#239953,.F.); +#239953 = EDGE_LOOP('',(#239954,#239964,#239973,#239981,#239989,#239998, + #240006,#240014,#240023,#240031,#240039,#240048)); +#239954 = ORIENTED_EDGE('',*,*,#239955,.T.); +#239955 = EDGE_CURVE('',#239956,#239958,#239960,.T.); +#239956 = VERTEX_POINT('',#239957); +#239957 = CARTESIAN_POINT('',(124.929596,-51.521878,1.585)); +#239958 = VERTEX_POINT('',#239959); +#239959 = CARTESIAN_POINT('',(125.343541,-51.245916,1.585)); +#239960 = LINE('',#239961,#239962); +#239961 = CARTESIAN_POINT('',(124.929596,-51.521878,1.585)); +#239962 = VECTOR('',#239963,1.); +#239963 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#239964 = ORIENTED_EDGE('',*,*,#239965,.T.); +#239965 = EDGE_CURVE('',#239958,#239966,#239968,.T.); +#239966 = VERTEX_POINT('',#239967); +#239967 = CARTESIAN_POINT('',(125.415652,-51.354082,1.585)); +#239968 = CIRCLE('',#239969,6.499976899535E-02); +#239969 = AXIS2_PLACEMENT_3D('',#239970,#239971,#239972); +#239970 = CARTESIAN_POINT('',(125.37959612917,-51.29999924722,1.585)); +#239971 = DIRECTION('',(0.,0.,-1.)); +#239972 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#239973 = ORIENTED_EDGE('',*,*,#239974,.T.); +#239974 = EDGE_CURVE('',#239966,#239975,#239977,.T.); +#239975 = VERTEX_POINT('',#239976); +#239976 = CARTESIAN_POINT('',(125.046776,-51.599999,1.585)); +#239977 = LINE('',#239978,#239979); +#239978 = CARTESIAN_POINT('',(125.415652,-51.354082,1.585)); +#239979 = VECTOR('',#239980,1.); +#239980 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#239981 = ORIENTED_EDGE('',*,*,#239982,.T.); +#239982 = EDGE_CURVE('',#239975,#239983,#239985,.T.); +#239983 = VERTEX_POINT('',#239984); +#239984 = CARTESIAN_POINT('',(125.415652,-51.845916,1.585)); +#239985 = LINE('',#239986,#239987); +#239986 = CARTESIAN_POINT('',(125.046776,-51.599999,1.585)); +#239987 = VECTOR('',#239988,1.); +#239988 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#239989 = ORIENTED_EDGE('',*,*,#239990,.T.); +#239990 = EDGE_CURVE('',#239983,#239991,#239993,.T.); +#239991 = VERTEX_POINT('',#239992); +#239992 = CARTESIAN_POINT('',(125.343541,-51.954082,1.585)); +#239993 = CIRCLE('',#239994,6.49997689954E-02); +#239994 = AXIS2_PLACEMENT_3D('',#239995,#239996,#239997); +#239995 = CARTESIAN_POINT('',(125.37959687747,-51.89999925164,1.585)); +#239996 = DIRECTION('',(0.,0.,-1.)); +#239997 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#239998 = ORIENTED_EDGE('',*,*,#239999,.T.); +#239999 = EDGE_CURVE('',#239991,#240000,#240002,.T.); +#240000 = VERTEX_POINT('',#240001); +#240001 = CARTESIAN_POINT('',(124.929596,-51.678119,1.585)); +#240002 = LINE('',#240003,#240004); +#240003 = CARTESIAN_POINT('',(125.343541,-51.954082,1.585)); +#240004 = VECTOR('',#240005,1.); +#240005 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#240006 = ORIENTED_EDGE('',*,*,#240007,.T.); +#240007 = EDGE_CURVE('',#240000,#240008,#240010,.T.); +#240008 = VERTEX_POINT('',#240009); +#240009 = CARTESIAN_POINT('',(124.515653,-51.954082,1.585)); +#240010 = LINE('',#240011,#240012); +#240011 = CARTESIAN_POINT('',(124.929596,-51.678119,1.585)); +#240012 = VECTOR('',#240013,1.); +#240013 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#240014 = ORIENTED_EDGE('',*,*,#240015,.T.); +#240015 = EDGE_CURVE('',#240008,#240016,#240018,.T.); +#240016 = VERTEX_POINT('',#240017); +#240017 = CARTESIAN_POINT('',(124.443541,-51.845916,1.585)); +#240018 = CIRCLE('',#240019,6.500004634766E-02); +#240019 = AXIS2_PLACEMENT_3D('',#240020,#240021,#240022); +#240020 = CARTESIAN_POINT('',(124.47959737004,-51.8999987533,1.585)); +#240021 = DIRECTION('',(0.,0.,-1.)); +#240022 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#240023 = ORIENTED_EDGE('',*,*,#240024,.T.); +#240024 = EDGE_CURVE('',#240016,#240025,#240027,.T.); +#240025 = VERTEX_POINT('',#240026); +#240026 = CARTESIAN_POINT('',(124.812416,-51.599999,1.585)); +#240027 = LINE('',#240028,#240029); +#240028 = CARTESIAN_POINT('',(124.443541,-51.845916,1.585)); +#240029 = VECTOR('',#240030,1.); +#240030 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#240031 = ORIENTED_EDGE('',*,*,#240032,.T.); +#240032 = EDGE_CURVE('',#240025,#240033,#240035,.T.); +#240033 = VERTEX_POINT('',#240034); +#240034 = CARTESIAN_POINT('',(124.443541,-51.354082,1.585)); +#240035 = LINE('',#240036,#240037); +#240036 = CARTESIAN_POINT('',(124.812416,-51.599999,1.585)); +#240037 = VECTOR('',#240038,1.); +#240038 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#240039 = ORIENTED_EDGE('',*,*,#240040,.T.); +#240040 = EDGE_CURVE('',#240033,#240041,#240043,.T.); +#240041 = VERTEX_POINT('',#240042); +#240042 = CARTESIAN_POINT('',(124.515653,-51.245916,1.585)); +#240043 = CIRCLE('',#240044,6.500004634723E-02); +#240044 = AXIS2_PLACEMENT_3D('',#240045,#240046,#240047); +#240045 = CARTESIAN_POINT('',(124.47959731405,-51.29999920937,1.585)); +#240046 = DIRECTION('',(0.,0.,-1.)); +#240047 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#240048 = ORIENTED_EDGE('',*,*,#240049,.T.); +#240049 = EDGE_CURVE('',#240041,#239956,#240050,.T.); +#240050 = LINE('',#240051,#240052); +#240051 = CARTESIAN_POINT('',(124.515653,-51.245916,1.585)); +#240052 = VECTOR('',#240053,1.); +#240053 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#240054 = PLANE('',#240055); +#240055 = AXIS2_PLACEMENT_3D('',#240056,#240057,#240058); +#240056 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240057 = DIRECTION('',(0.,0.,1.)); +#240058 = DIRECTION('',(1.,0.,-0.)); +#240059 = SHELL_BASED_SURFACE_MODEL('',(#240060)); +#240060 = OPEN_SHELL('',(#240061)); +#240061 = ADVANCED_FACE('',(#240062),#240334,.T.); +#240062 = FACE_BOUND('',#240063,.F.); +#240063 = EDGE_LOOP('',(#240064,#240075,#240083,#240091,#240100,#240108, + #240116,#240124,#240132,#240140,#240148,#240156,#240165,#240173, + #240181,#240189,#240197,#240205,#240214,#240222,#240230,#240239, + #240247,#240255,#240263,#240271,#240279,#240287,#240295,#240304, + #240312,#240320,#240328)); +#240064 = ORIENTED_EDGE('',*,*,#240065,.T.); +#240065 = EDGE_CURVE('',#240066,#240068,#240070,.T.); +#240066 = VERTEX_POINT('',#240067); +#240067 = CARTESIAN_POINT('',(119.39079,-51.322301,1.585)); +#240068 = VERTEX_POINT('',#240069); +#240069 = CARTESIAN_POINT('',(119.514119,-51.36341,1.585)); +#240070 = CIRCLE('',#240071,6.499998485138E-02); +#240071 = AXIS2_PLACEMENT_3D('',#240072,#240073,#240074); +#240072 = CARTESIAN_POINT('',(119.45245436584,-51.34285590248,1.585)); +#240073 = DIRECTION('',(0.,0.,-1.)); +#240074 = DIRECTION('',(-0.948682772516,0.316229342616,0.)); +#240075 = ORIENTED_EDGE('',*,*,#240076,.T.); +#240076 = EDGE_CURVE('',#240068,#240077,#240079,.T.); +#240077 = VERTEX_POINT('',#240078); +#240078 = CARTESIAN_POINT('',(119.474597,-51.481975,1.585)); +#240079 = LINE('',#240080,#240081); +#240080 = CARTESIAN_POINT('',(119.514119,-51.36341,1.585)); +#240081 = VECTOR('',#240082,1.); +#240082 = DIRECTION('',(-0.316230166427,-0.94868249791,0.)); +#240083 = ORIENTED_EDGE('',*,*,#240084,.T.); +#240084 = EDGE_CURVE('',#240077,#240085,#240087,.T.); +#240085 = VERTEX_POINT('',#240086); +#240086 = CARTESIAN_POINT('',(119.474597,-51.670368,1.585)); +#240087 = LINE('',#240088,#240089); +#240088 = CARTESIAN_POINT('',(119.474597,-51.481975,1.585)); +#240089 = VECTOR('',#240090,1.); +#240090 = DIRECTION('',(0.,-1.,0.)); +#240091 = ORIENTED_EDGE('',*,*,#240092,.T.); +#240092 = EDGE_CURVE('',#240085,#240093,#240095,.T.); +#240093 = VERTEX_POINT('',#240094); +#240094 = CARTESIAN_POINT('',(119.59637,-51.792142,1.585)); +#240095 = CIRCLE('',#240096,0.170995888391); +#240096 = AXIS2_PLACEMENT_3D('',#240097,#240098,#240099); +#240097 = CARTESIAN_POINT('',(119.6399473225,-51.62679203534,1.585)); +#240098 = DIRECTION('',(0.,0.,1.)); +#240099 = DIRECTION('',(-0.96698420095,-0.254836330051,0.)); +#240100 = ORIENTED_EDGE('',*,*,#240101,.T.); +#240101 = EDGE_CURVE('',#240093,#240102,#240104,.T.); +#240102 = VERTEX_POINT('',#240103); +#240103 = CARTESIAN_POINT('',(119.651395,-51.792142,1.585)); +#240104 = LINE('',#240105,#240106); +#240105 = CARTESIAN_POINT('',(119.59637,-51.792142,1.585)); +#240106 = VECTOR('',#240107,1.); +#240107 = DIRECTION('',(1.,0.,0.)); +#240108 = ORIENTED_EDGE('',*,*,#240109,.T.); +#240109 = EDGE_CURVE('',#240102,#240110,#240112,.T.); +#240110 = VERTEX_POINT('',#240111); +#240111 = CARTESIAN_POINT('',(119.713951,-51.760864,1.585)); +#240112 = LINE('',#240113,#240114); +#240113 = CARTESIAN_POINT('',(119.651395,-51.792142,1.585)); +#240114 = VECTOR('',#240115,1.); +#240115 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#240116 = ORIENTED_EDGE('',*,*,#240117,.T.); +#240117 = EDGE_CURVE('',#240110,#240118,#240120,.T.); +#240118 = VERTEX_POINT('',#240119); +#240119 = CARTESIAN_POINT('',(119.741889,-51.732925,1.585)); +#240120 = LINE('',#240121,#240122); +#240121 = CARTESIAN_POINT('',(119.713951,-51.760864,1.585)); +#240122 = VECTOR('',#240123,1.); +#240123 = DIRECTION('',(0.707094126371,0.707119435775,0.)); +#240124 = ORIENTED_EDGE('',*,*,#240125,.T.); +#240125 = EDGE_CURVE('',#240118,#240126,#240128,.T.); +#240126 = VERTEX_POINT('',#240127); +#240127 = CARTESIAN_POINT('',(119.776839,-51.663024,1.585)); +#240128 = LINE('',#240129,#240130); +#240129 = CARTESIAN_POINT('',(119.741889,-51.732925,1.585)); +#240130 = VECTOR('',#240131,1.); +#240131 = DIRECTION('',(0.447208477227,0.894429750118,0.)); +#240132 = ORIENTED_EDGE('',*,*,#240133,.T.); +#240133 = EDGE_CURVE('',#240126,#240134,#240136,.T.); +#240134 = VERTEX_POINT('',#240135); +#240135 = CARTESIAN_POINT('',(119.822887,-51.485216,1.585)); +#240136 = LINE('',#240137,#240138); +#240137 = CARTESIAN_POINT('',(119.776839,-51.663024,1.585)); +#240138 = VECTOR('',#240139,1.); +#240139 = DIRECTION('',(0.250705183969,0.968063484866,0.)); +#240140 = ORIENTED_EDGE('',*,*,#240141,.T.); +#240141 = EDGE_CURVE('',#240134,#240142,#240144,.T.); +#240142 = VERTEX_POINT('',#240143); +#240143 = CARTESIAN_POINT('',(119.87792,-51.382609,1.585)); +#240144 = LINE('',#240145,#240146); +#240145 = CARTESIAN_POINT('',(119.822887,-51.485216,1.585)); +#240146 = VECTOR('',#240147,1.); +#240147 = DIRECTION('',(0.472654886773,0.88124761447,0.)); +#240148 = ORIENTED_EDGE('',*,*,#240149,.T.); +#240149 = EDGE_CURVE('',#240142,#240150,#240152,.T.); +#240150 = VERTEX_POINT('',#240151); +#240151 = CARTESIAN_POINT('',(119.937671,-51.327575,1.585)); +#240152 = LINE('',#240153,#240154); +#240153 = CARTESIAN_POINT('',(119.87792,-51.382609,1.585)); +#240154 = VECTOR('',#240155,1.); +#240155 = DIRECTION('',(0.735543975151,0.677476981615,0.)); +#240156 = ORIENTED_EDGE('',*,*,#240157,.T.); +#240157 = EDGE_CURVE('',#240150,#240158,#240160,.T.); +#240158 = VERTEX_POINT('',#240159); +#240159 = CARTESIAN_POINT('',(120.167237,-51.284718,1.585)); +#240160 = CIRCLE('',#240161,0.258971949836); +#240161 = AXIS2_PLACEMENT_3D('',#240162,#240163,#240164); +#240162 = CARTESIAN_POINT('',(120.09487456064,-51.53337468736,1.585)); +#240163 = DIRECTION('',(0.,0.,-1.)); +#240164 = DIRECTION('',(-0.607029296992,0.794679452731,0.)); +#240165 = ORIENTED_EDGE('',*,*,#240166,.T.); +#240166 = EDGE_CURVE('',#240158,#240167,#240169,.T.); +#240167 = VERTEX_POINT('',#240168); +#240168 = CARTESIAN_POINT('',(120.269844,-51.339751,1.585)); +#240169 = LINE('',#240170,#240171); +#240170 = CARTESIAN_POINT('',(120.167237,-51.284718,1.585)); +#240171 = VECTOR('',#240172,1.); +#240172 = DIRECTION('',(0.88124761447,-0.472654886773,0.)); +#240173 = ORIENTED_EDGE('',*,*,#240174,.T.); +#240174 = EDGE_CURVE('',#240167,#240175,#240177,.T.); +#240175 = VERTEX_POINT('',#240176); +#240176 = CARTESIAN_POINT('',(120.324878,-51.399502,1.585)); +#240177 = LINE('',#240178,#240179); +#240178 = CARTESIAN_POINT('',(120.269844,-51.339751,1.585)); +#240179 = VECTOR('',#240180,1.); +#240180 = DIRECTION('',(0.677476981615,-0.735543975152,0.)); +#240181 = ORIENTED_EDGE('',*,*,#240182,.T.); +#240182 = EDGE_CURVE('',#240175,#240183,#240185,.T.); +#240183 = VERTEX_POINT('',#240184); +#240184 = CARTESIAN_POINT('',(120.371681,-51.499628,1.585)); +#240185 = LINE('',#240186,#240187); +#240186 = CARTESIAN_POINT('',(120.324878,-51.399502,1.585)); +#240187 = VECTOR('',#240188,1.); +#240188 = DIRECTION('',(0.423461430416,-0.905914133321,0.)); +#240189 = ORIENTED_EDGE('',*,*,#240190,.T.); +#240190 = EDGE_CURVE('',#240183,#240191,#240193,.T.); +#240191 = VERTEX_POINT('',#240192); +#240192 = CARTESIAN_POINT('',(120.372563,-51.738793,1.585)); +#240193 = LINE('',#240194,#240195); +#240194 = CARTESIAN_POINT('',(120.371681,-51.499628,1.585)); +#240195 = VECTOR('',#240196,1.); +#240196 = DIRECTION('',(3.687805500068E-03,-0.999993200022,0.)); +#240197 = ORIENTED_EDGE('',*,*,#240198,.T.); +#240198 = EDGE_CURVE('',#240191,#240199,#240201,.T.); +#240199 = VERTEX_POINT('',#240200); +#240200 = CARTESIAN_POINT('',(120.328404,-51.877697,1.585)); +#240201 = LINE('',#240202,#240203); +#240202 = CARTESIAN_POINT('',(120.372563,-51.738793,1.585)); +#240203 = VECTOR('',#240204,1.); +#240204 = DIRECTION('',(-0.302968602544,-0.953000538233,0.)); +#240205 = ORIENTED_EDGE('',*,*,#240206,.T.); +#240206 = EDGE_CURVE('',#240199,#240207,#240209,.T.); +#240207 = VERTEX_POINT('',#240208); +#240208 = CARTESIAN_POINT('',(120.205076,-51.836587,1.585)); +#240209 = CIRCLE('',#240210,6.499966862258E-02); +#240210 = AXIS2_PLACEMENT_3D('',#240211,#240212,#240213); +#240211 = CARTESIAN_POINT('',(120.26674006734,-51.85714179797,1.585)); +#240212 = DIRECTION('',(-0.,0.,-1.)); +#240213 = DIRECTION('',(0.948680723537,-0.316235489453,-0.)); +#240214 = ORIENTED_EDGE('',*,*,#240215,.T.); +#240215 = EDGE_CURVE('',#240207,#240216,#240218,.T.); +#240216 = VERTEX_POINT('',#240217); +#240217 = CARTESIAN_POINT('',(120.244597,-51.718024,1.585)); +#240218 = LINE('',#240219,#240220); +#240219 = CARTESIAN_POINT('',(120.205076,-51.836587,1.585)); +#240220 = VECTOR('',#240221,1.); +#240221 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#240222 = ORIENTED_EDGE('',*,*,#240223,.T.); +#240223 = EDGE_CURVE('',#240216,#240224,#240226,.T.); +#240224 = VERTEX_POINT('',#240225); +#240225 = CARTESIAN_POINT('',(120.244597,-51.52963,1.585)); +#240226 = LINE('',#240227,#240228); +#240227 = CARTESIAN_POINT('',(120.244597,-51.718024,1.585)); +#240228 = VECTOR('',#240229,1.); +#240229 = DIRECTION('',(0.,1.,0.)); +#240230 = ORIENTED_EDGE('',*,*,#240231,.T.); +#240231 = EDGE_CURVE('',#240224,#240232,#240234,.T.); +#240232 = VERTEX_POINT('',#240233); +#240233 = CARTESIAN_POINT('',(120.122823,-51.407856,1.585)); +#240234 = CIRCLE('',#240235,0.170999251022); +#240235 = AXIS2_PLACEMENT_3D('',#240236,#240237,#240238); +#240236 = CARTESIAN_POINT('',(120.079244,-51.573209,1.585)); +#240237 = DIRECTION('',(0.,0.,1.)); +#240238 = DIRECTION('',(0.966980843553,0.254849069453,-0.)); +#240239 = ORIENTED_EDGE('',*,*,#240240,.T.); +#240240 = EDGE_CURVE('',#240232,#240241,#240243,.T.); +#240241 = VERTEX_POINT('',#240242); +#240242 = CARTESIAN_POINT('',(120.067799,-51.407856,1.585)); +#240243 = LINE('',#240244,#240245); +#240244 = CARTESIAN_POINT('',(120.122823,-51.407856,1.585)); +#240245 = VECTOR('',#240246,1.); +#240246 = DIRECTION('',(-1.,0.,0.)); +#240247 = ORIENTED_EDGE('',*,*,#240248,.T.); +#240248 = EDGE_CURVE('',#240241,#240249,#240251,.T.); +#240249 = VERTEX_POINT('',#240250); +#240250 = CARTESIAN_POINT('',(120.005243,-51.439134,1.585)); +#240251 = LINE('',#240252,#240253); +#240252 = CARTESIAN_POINT('',(120.067799,-51.407856,1.585)); +#240253 = VECTOR('',#240254,1.); +#240254 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#240255 = ORIENTED_EDGE('',*,*,#240256,.T.); +#240256 = EDGE_CURVE('',#240249,#240257,#240259,.T.); +#240257 = VERTEX_POINT('',#240258); +#240258 = CARTESIAN_POINT('',(119.977303,-51.467074,1.585)); +#240259 = LINE('',#240260,#240261); +#240260 = CARTESIAN_POINT('',(120.005243,-51.439134,1.585)); +#240261 = VECTOR('',#240262,1.); +#240262 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#240263 = ORIENTED_EDGE('',*,*,#240264,.T.); +#240264 = EDGE_CURVE('',#240257,#240265,#240267,.T.); +#240265 = VERTEX_POINT('',#240266); +#240266 = CARTESIAN_POINT('',(119.942353,-51.536974,1.585)); +#240267 = LINE('',#240268,#240269); +#240268 = CARTESIAN_POINT('',(119.977303,-51.467074,1.585)); +#240269 = VECTOR('',#240270,1.); +#240270 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#240271 = ORIENTED_EDGE('',*,*,#240272,.T.); +#240272 = EDGE_CURVE('',#240265,#240273,#240275,.T.); +#240273 = VERTEX_POINT('',#240274); +#240274 = CARTESIAN_POINT('',(119.896306,-51.714782,1.585)); +#240275 = LINE('',#240276,#240277); +#240276 = CARTESIAN_POINT('',(119.942353,-51.536974,1.585)); +#240277 = VECTOR('',#240278,1.); +#240278 = DIRECTION('',(-0.250700081726,-0.96806480621,0.)); +#240279 = ORIENTED_EDGE('',*,*,#240280,.T.); +#240280 = EDGE_CURVE('',#240273,#240281,#240283,.T.); +#240281 = VERTEX_POINT('',#240282); +#240282 = CARTESIAN_POINT('',(119.841273,-51.81739,1.585)); +#240283 = LINE('',#240284,#240285); +#240284 = CARTESIAN_POINT('',(119.896306,-51.714782,1.585)); +#240285 = VECTOR('',#240286,1.); +#240286 = DIRECTION('',(-0.472651309433,-0.881249533158,0.)); +#240287 = ORIENTED_EDGE('',*,*,#240288,.T.); +#240288 = EDGE_CURVE('',#240281,#240289,#240291,.T.); +#240289 = VERTEX_POINT('',#240290); +#240290 = CARTESIAN_POINT('',(119.781523,-51.872423,1.585)); +#240291 = LINE('',#240292,#240293); +#240292 = CARTESIAN_POINT('',(119.841273,-51.81739,1.585)); +#240293 = VECTOR('',#240294,1.); +#240294 = DIRECTION('',(-0.735544459429,-0.677476455829,0.)); +#240295 = ORIENTED_EDGE('',*,*,#240296,.T.); +#240296 = EDGE_CURVE('',#240289,#240297,#240299,.T.); +#240297 = VERTEX_POINT('',#240298); +#240298 = CARTESIAN_POINT('',(119.458013,-51.866036,1.585)); +#240299 = CIRCLE('',#240300,0.260197694649); +#240300 = AXIS2_PLACEMENT_3D('',#240301,#240302,#240303); +#240301 = CARTESIAN_POINT('',(119.62379048924,-51.66548509783,1.585)); +#240302 = DIRECTION('',(-0.,0.,-1.)); +#240303 = DIRECTION('',(0.606202568261,-0.795310282993,-0.)); +#240304 = ORIENTED_EDGE('',*,*,#240305,.T.); +#240305 = EDGE_CURVE('',#240297,#240306,#240308,.T.); +#240306 = VERTEX_POINT('',#240307); +#240307 = CARTESIAN_POINT('',(119.400702,-51.808725,1.585)); +#240308 = LINE('',#240309,#240310); +#240309 = CARTESIAN_POINT('',(119.458013,-51.866036,1.585)); +#240310 = VECTOR('',#240311,1.); +#240311 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#240312 = ORIENTED_EDGE('',*,*,#240313,.T.); +#240313 = EDGE_CURVE('',#240306,#240314,#240316,.T.); +#240314 = VERTEX_POINT('',#240315); +#240315 = CARTESIAN_POINT('',(119.347512,-51.700369,1.585)); +#240316 = LINE('',#240317,#240318); +#240317 = CARTESIAN_POINT('',(119.400702,-51.808725,1.585)); +#240318 = VECTOR('',#240319,1.); +#240319 = DIRECTION('',(-0.440653527492,0.897677263112,0.)); +#240320 = ORIENTED_EDGE('',*,*,#240321,.T.); +#240321 = EDGE_CURVE('',#240314,#240322,#240324,.T.); +#240322 = VERTEX_POINT('',#240323); +#240323 = CARTESIAN_POINT('',(119.34663,-51.461205,1.585)); +#240324 = LINE('',#240325,#240326); +#240325 = CARTESIAN_POINT('',(119.347512,-51.700369,1.585)); +#240326 = VECTOR('',#240327,1.); +#240327 = DIRECTION('',(-3.687820919367E-03,0.999993199965,0.)); +#240328 = ORIENTED_EDGE('',*,*,#240329,.T.); +#240329 = EDGE_CURVE('',#240322,#240066,#240330,.T.); +#240330 = LINE('',#240331,#240332); +#240331 = CARTESIAN_POINT('',(119.34663,-51.461205,1.585)); +#240332 = VECTOR('',#240333,1.); +#240333 = DIRECTION('',(0.302974833624,0.952998557287,0.)); +#240334 = PLANE('',#240335); +#240335 = AXIS2_PLACEMENT_3D('',#240336,#240337,#240338); +#240336 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240337 = DIRECTION('',(0.,0.,1.)); +#240338 = DIRECTION('',(1.,0.,-0.)); +#240339 = SHELL_BASED_SURFACE_MODEL('',(#240340)); +#240340 = OPEN_SHELL('',(#240341)); +#240341 = ADVANCED_FACE('',(#240342),#240453,.T.); +#240342 = FACE_BOUND('',#240343,.F.); +#240343 = EDGE_LOOP('',(#240344,#240355,#240363,#240372,#240380,#240388, + #240397,#240405,#240413,#240422,#240430,#240439,#240447)); +#240344 = ORIENTED_EDGE('',*,*,#240345,.T.); +#240345 = EDGE_CURVE('',#240346,#240348,#240350,.T.); +#240346 = VERTEX_POINT('',#240347); +#240347 = CARTESIAN_POINT('',(134.732109,-51.258901,1.585)); +#240348 = VERTEX_POINT('',#240349); +#240349 = CARTESIAN_POINT('',(134.759597,-51.134999,1.585)); +#240350 = CIRCLE('',#240351,6.500025906085E-02); +#240351 = AXIS2_PLACEMENT_3D('',#240352,#240353,#240354); +#240352 = CARTESIAN_POINT('',(134.75959751745,-51.19999925905,1.585)); +#240353 = DIRECTION('',(0.,0.,-1.)); +#240354 = DIRECTION('',(-0.42289858311,-0.90617701825,-0.)); +#240355 = ORIENTED_EDGE('',*,*,#240356,.T.); +#240356 = EDGE_CURVE('',#240348,#240357,#240359,.T.); +#240357 = VERTEX_POINT('',#240358); +#240358 = CARTESIAN_POINT('',(135.659597,-51.134999,1.585)); +#240359 = LINE('',#240360,#240361); +#240360 = CARTESIAN_POINT('',(134.759597,-51.134999,1.585)); +#240361 = VECTOR('',#240362,1.); +#240362 = DIRECTION('',(1.,0.,0.)); +#240363 = ORIENTED_EDGE('',*,*,#240364,.T.); +#240364 = EDGE_CURVE('',#240357,#240365,#240367,.T.); +#240365 = VERTEX_POINT('',#240366); +#240366 = CARTESIAN_POINT('',(135.659597,-51.264999,1.585)); +#240367 = CIRCLE('',#240368,6.500000000092E-02); +#240368 = AXIS2_PLACEMENT_3D('',#240369,#240370,#240371); +#240369 = CARTESIAN_POINT('',(135.65959665513,-51.199999,1.585)); +#240370 = DIRECTION('',(0.,0.,-1.)); +#240371 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#240372 = ORIENTED_EDGE('',*,*,#240373,.T.); +#240373 = EDGE_CURVE('',#240365,#240374,#240376,.T.); +#240374 = VERTEX_POINT('',#240375); +#240375 = CARTESIAN_POINT('',(135.052589,-51.264999,1.585)); +#240376 = LINE('',#240377,#240378); +#240377 = CARTESIAN_POINT('',(135.659597,-51.264999,1.585)); +#240378 = VECTOR('',#240379,1.); +#240379 = DIRECTION('',(-1.,0.,0.)); +#240380 = ORIENTED_EDGE('',*,*,#240381,.T.); +#240381 = EDGE_CURVE('',#240374,#240382,#240384,.T.); +#240382 = VERTEX_POINT('',#240383); +#240383 = CARTESIAN_POINT('',(135.429942,-51.441097,1.585)); +#240384 = LINE('',#240385,#240386); +#240385 = CARTESIAN_POINT('',(135.052589,-51.264999,1.585)); +#240386 = VECTOR('',#240387,1.); +#240387 = DIRECTION('',(0.906183201345,-0.422885333866,0.)); +#240388 = ORIENTED_EDGE('',*,*,#240389,.T.); +#240389 = EDGE_CURVE('',#240382,#240390,#240392,.T.); +#240390 = VERTEX_POINT('',#240391); +#240391 = CARTESIAN_POINT('',(135.446353,-51.547935,1.585)); +#240392 = CIRCLE('',#240393,6.500076000412E-02); +#240393 = AXIS2_PLACEMENT_3D('',#240394,#240395,#240396); +#240394 = CARTESIAN_POINT('',(135.40245273384,-51.49999894434,1.585)); +#240395 = DIRECTION('',(0.,0.,-1.)); +#240396 = DIRECTION('',(0.422906842294,0.906173163772,0.)); +#240397 = ORIENTED_EDGE('',*,*,#240398,.T.); +#240398 = EDGE_CURVE('',#240390,#240399,#240401,.T.); +#240399 = VERTEX_POINT('',#240400); +#240400 = CARTESIAN_POINT('',(135.052589,-51.734999,1.585)); +#240401 = LINE('',#240402,#240403); +#240402 = CARTESIAN_POINT('',(135.446353,-51.547935,1.585)); +#240403 = VECTOR('',#240404,1.); +#240404 = DIRECTION('',(-0.903254299692,-0.429105663081,0.)); +#240405 = ORIENTED_EDGE('',*,*,#240406,.T.); +#240406 = EDGE_CURVE('',#240399,#240407,#240409,.T.); +#240407 = VERTEX_POINT('',#240408); +#240408 = CARTESIAN_POINT('',(135.659597,-51.734999,1.585)); +#240409 = LINE('',#240410,#240411); +#240410 = CARTESIAN_POINT('',(135.052589,-51.734999,1.585)); +#240411 = VECTOR('',#240412,1.); +#240412 = DIRECTION('',(1.,0.,0.)); +#240413 = ORIENTED_EDGE('',*,*,#240414,.T.); +#240414 = EDGE_CURVE('',#240407,#240415,#240417,.T.); +#240415 = VERTEX_POINT('',#240416); +#240416 = CARTESIAN_POINT('',(135.659597,-51.864999,1.585)); +#240417 = CIRCLE('',#240418,6.500000000091E-02); +#240418 = AXIS2_PLACEMENT_3D('',#240419,#240420,#240421); +#240419 = CARTESIAN_POINT('',(135.65959665513,-51.799999,1.585)); +#240420 = DIRECTION('',(0.,0.,-1.)); +#240421 = DIRECTION('',(5.305658025669E-06,0.999999999986,0.)); +#240422 = ORIENTED_EDGE('',*,*,#240423,.T.); +#240423 = EDGE_CURVE('',#240415,#240424,#240426,.T.); +#240424 = VERTEX_POINT('',#240425); +#240425 = CARTESIAN_POINT('',(134.759597,-51.864999,1.585)); +#240426 = LINE('',#240427,#240428); +#240427 = CARTESIAN_POINT('',(135.659597,-51.864999,1.585)); +#240428 = VECTOR('',#240429,1.); +#240429 = DIRECTION('',(-1.,0.,0.)); +#240430 = ORIENTED_EDGE('',*,*,#240431,.T.); +#240431 = EDGE_CURVE('',#240424,#240432,#240434,.T.); +#240432 = VERTEX_POINT('',#240433); +#240433 = CARTESIAN_POINT('',(134.732109,-51.741097,1.585)); +#240434 = CIRCLE('',#240435,6.500025919344E-02); +#240435 = AXIS2_PLACEMENT_3D('',#240436,#240437,#240438); +#240436 = CARTESIAN_POINT('',(134.75959751805,-51.7999987408,1.585)); +#240437 = DIRECTION('',(0.,0.,-1.)); +#240438 = DIRECTION('',(-7.97006399516E-06,-0.999999999968,-0.)); +#240439 = ORIENTED_EDGE('',*,*,#240440,.T.); +#240440 = EDGE_CURVE('',#240432,#240441,#240443,.T.); +#240441 = VERTEX_POINT('',#240442); +#240442 = CARTESIAN_POINT('',(135.248748,-51.499999,1.585)); +#240443 = LINE('',#240444,#240445); +#240444 = CARTESIAN_POINT('',(134.732109,-51.741097,1.585)); +#240445 = VECTOR('',#240446,1.); +#240446 = DIRECTION('',(0.906183274426,0.422885177266,0.)); +#240447 = ORIENTED_EDGE('',*,*,#240448,.T.); +#240448 = EDGE_CURVE('',#240441,#240346,#240449,.T.); +#240449 = LINE('',#240450,#240451); +#240450 = CARTESIAN_POINT('',(135.248748,-51.499999,1.585)); +#240451 = VECTOR('',#240452,1.); +#240452 = DIRECTION('',(-0.906183274426,0.422885177266,0.)); +#240453 = PLANE('',#240454); +#240454 = AXIS2_PLACEMENT_3D('',#240455,#240456,#240457); +#240455 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240456 = DIRECTION('',(0.,0.,1.)); +#240457 = DIRECTION('',(1.,0.,-0.)); +#240458 = SHELL_BASED_SURFACE_MODEL('',(#240459)); +#240459 = OPEN_SHELL('',(#240460)); +#240460 = ADVANCED_FACE('',(#240461),#240497,.T.); +#240461 = FACE_BOUND('',#240462,.F.); +#240462 = EDGE_LOOP('',(#240463,#240474,#240482,#240491)); +#240463 = ORIENTED_EDGE('',*,*,#240464,.T.); +#240464 = EDGE_CURVE('',#240465,#240467,#240469,.T.); +#240465 = VERTEX_POINT('',#240466); +#240466 = CARTESIAN_POINT('',(162.05107,-51.7931,1.585)); +#240467 = VERTEX_POINT('',#240468); +#240468 = CARTESIAN_POINT('',(162.05107,-51.6731,1.585)); +#240469 = CIRCLE('',#240470,6.000000000042E-02); +#240470 = AXIS2_PLACEMENT_3D('',#240471,#240472,#240473); +#240471 = CARTESIAN_POINT('',(162.05106977441,-51.7331,1.585)); +#240472 = DIRECTION('',(0.,0.,-1.)); +#240473 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#240474 = ORIENTED_EDGE('',*,*,#240475,.T.); +#240475 = EDGE_CURVE('',#240467,#240476,#240478,.T.); +#240476 = VERTEX_POINT('',#240477); +#240477 = CARTESIAN_POINT('',(162.33223,-51.6731,1.585)); +#240478 = LINE('',#240479,#240480); +#240479 = CARTESIAN_POINT('',(162.05107,-51.6731,1.585)); +#240480 = VECTOR('',#240481,1.); +#240481 = DIRECTION('',(1.,0.,0.)); +#240482 = ORIENTED_EDGE('',*,*,#240483,.T.); +#240483 = EDGE_CURVE('',#240476,#240484,#240486,.T.); +#240484 = VERTEX_POINT('',#240485); +#240485 = CARTESIAN_POINT('',(162.33223,-51.7931,1.585)); +#240486 = CIRCLE('',#240487,6.000000000043E-02); +#240487 = AXIS2_PLACEMENT_3D('',#240488,#240489,#240490); +#240488 = CARTESIAN_POINT('',(162.33223022558,-51.7331,1.585)); +#240489 = DIRECTION('',(0.,0.,-1.)); +#240490 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#240491 = ORIENTED_EDGE('',*,*,#240492,.T.); +#240492 = EDGE_CURVE('',#240484,#240465,#240493,.T.); +#240493 = LINE('',#240494,#240495); +#240494 = CARTESIAN_POINT('',(162.33223,-51.7931,1.585)); +#240495 = VECTOR('',#240496,1.); +#240496 = DIRECTION('',(-1.,0.,0.)); +#240497 = PLANE('',#240498); +#240498 = AXIS2_PLACEMENT_3D('',#240499,#240500,#240501); +#240499 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240500 = DIRECTION('',(0.,0.,1.)); +#240501 = DIRECTION('',(1.,0.,-0.)); +#240502 = SHELL_BASED_SURFACE_MODEL('',(#240503)); +#240503 = OPEN_SHELL('',(#240504)); +#240504 = ADVANCED_FACE('',(#240505,#240606),#240689,.T.); +#240505 = FACE_BOUND('',#240506,.F.); +#240506 = EDGE_LOOP('',(#240507,#240518,#240526,#240534,#240542,#240550, + #240559,#240567,#240576,#240584,#240592,#240600)); +#240507 = ORIENTED_EDGE('',*,*,#240508,.T.); +#240508 = EDGE_CURVE('',#240509,#240511,#240513,.T.); +#240509 = VERTEX_POINT('',#240510); +#240510 = CARTESIAN_POINT('',(177.115199,-51.148077,1.585)); +#240511 = VERTEX_POINT('',#240512); +#240512 = CARTESIAN_POINT('',(177.678513,-51.153443,1.585)); +#240513 = CIRCLE('',#240514,0.504047013411); +#240514 = AXIS2_PLACEMENT_3D('',#240515,#240516,#240517); +#240515 = CARTESIAN_POINT('',(177.39287439108,-51.56874286374,1.585)); +#240516 = DIRECTION('',(0.,0.,-1.)); +#240517 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#240518 = ORIENTED_EDGE('',*,*,#240519,.T.); +#240519 = EDGE_CURVE('',#240511,#240520,#240522,.T.); +#240520 = VERTEX_POINT('',#240521); +#240521 = CARTESIAN_POINT('',(177.741967,-51.218973,1.585)); +#240522 = LINE('',#240523,#240524); +#240523 = CARTESIAN_POINT('',(177.678513,-51.153443,1.585)); +#240524 = VECTOR('',#240525,1.); +#240525 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#240526 = ORIENTED_EDGE('',*,*,#240527,.T.); +#240527 = EDGE_CURVE('',#240520,#240528,#240530,.T.); +#240528 = VERTEX_POINT('',#240529); +#240529 = CARTESIAN_POINT('',(177.800028,-51.33942,1.585)); +#240530 = LINE('',#240531,#240532); +#240531 = CARTESIAN_POINT('',(177.741967,-51.218973,1.585)); +#240532 = VECTOR('',#240533,1.); +#240533 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#240534 = ORIENTED_EDGE('',*,*,#240535,.T.); +#240535 = EDGE_CURVE('',#240528,#240536,#240538,.T.); +#240536 = VERTEX_POINT('',#240537); +#240537 = CARTESIAN_POINT('',(177.798642,-51.564766,1.585)); +#240538 = LINE('',#240539,#240540); +#240539 = CARTESIAN_POINT('',(177.800028,-51.33942,1.585)); +#240540 = VECTOR('',#240541,1.); +#240541 = DIRECTION('',(-6.150425501802E-03,-0.999981085954,0.)); +#240542 = ORIENTED_EDGE('',*,*,#240543,.T.); +#240543 = EDGE_CURVE('',#240536,#240544,#240546,.T.); +#240544 = VERTEX_POINT('',#240545); +#240545 = CARTESIAN_POINT('',(178.074434,-51.566207,1.585)); +#240546 = LINE('',#240547,#240548); +#240547 = CARTESIAN_POINT('',(177.798642,-51.564766,1.585)); +#240548 = VECTOR('',#240549,1.); +#240549 = DIRECTION('',(0.999986350217,-5.22488081838E-03,0.)); +#240550 = ORIENTED_EDGE('',*,*,#240551,.T.); +#240551 = EDGE_CURVE('',#240544,#240552,#240554,.T.); +#240552 = VERTEX_POINT('',#240553); +#240553 = CARTESIAN_POINT('',(178.059802,-51.714766,1.585)); +#240554 = CIRCLE('',#240555,7.500006711464E-02); +#240555 = AXIS2_PLACEMENT_3D('',#240556,#240557,#240558); +#240556 = CARTESIAN_POINT('',(178.05980206711,-51.63976593288,1.585)); +#240557 = DIRECTION('',(0.,0.,-1.)); +#240558 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#240559 = ORIENTED_EDGE('',*,*,#240560,.T.); +#240560 = EDGE_CURVE('',#240552,#240561,#240563,.T.); +#240561 = VERTEX_POINT('',#240562); +#240562 = CARTESIAN_POINT('',(177.04517,-51.713325,1.585)); +#240563 = LINE('',#240564,#240565); +#240564 = CARTESIAN_POINT('',(178.059802,-51.714766,1.585)); +#240565 = VECTOR('',#240566,1.); +#240566 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#240567 = ORIENTED_EDGE('',*,*,#240568,.T.); +#240568 = EDGE_CURVE('',#240561,#240569,#240571,.T.); +#240569 = VERTEX_POINT('',#240570); +#240570 = CARTESIAN_POINT('',(177.00097,-51.594569,1.585)); +#240571 = CIRCLE('',#240572,7.424728667613E-02); +#240572 = AXIS2_PLACEMENT_3D('',#240573,#240574,#240575); +#240573 = CARTESIAN_POINT('',(177.05934915462,-51.64044419901,1.585)); +#240574 = DIRECTION('',(0.,0.,-1.)); +#240575 = DIRECTION('',(-0.19097202414,-0.981595479816,-0.)); +#240576 = ORIENTED_EDGE('',*,*,#240577,.T.); +#240577 = EDGE_CURVE('',#240569,#240578,#240580,.T.); +#240578 = VERTEX_POINT('',#240579); +#240579 = CARTESIAN_POINT('',(176.986243,-51.55916,1.585)); +#240580 = LINE('',#240581,#240582); +#240581 = CARTESIAN_POINT('',(177.00097,-51.594569,1.585)); +#240582 = VECTOR('',#240583,1.); +#240583 = DIRECTION('',(-0.384020957699,0.923324376396,0.)); +#240584 = ORIENTED_EDGE('',*,*,#240585,.T.); +#240585 = EDGE_CURVE('',#240578,#240586,#240588,.T.); +#240586 = VERTEX_POINT('',#240587); +#240587 = CARTESIAN_POINT('',(176.987465,-51.334243,1.585)); +#240588 = LINE('',#240589,#240590); +#240589 = CARTESIAN_POINT('',(176.986243,-51.55916,1.585)); +#240590 = VECTOR('',#240591,1.); +#240591 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#240592 = ORIENTED_EDGE('',*,*,#240593,.T.); +#240593 = EDGE_CURVE('',#240586,#240594,#240596,.T.); +#240594 = VERTEX_POINT('',#240595); +#240595 = CARTESIAN_POINT('',(177.049669,-51.21153,1.585)); +#240596 = LINE('',#240597,#240598); +#240597 = CARTESIAN_POINT('',(176.987465,-51.334243,1.585)); +#240598 = VECTOR('',#240599,1.); +#240599 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#240600 = ORIENTED_EDGE('',*,*,#240601,.T.); +#240601 = EDGE_CURVE('',#240594,#240509,#240602,.T.); +#240602 = LINE('',#240603,#240604); +#240603 = CARTESIAN_POINT('',(177.049669,-51.21153,1.585)); +#240604 = VECTOR('',#240605,1.); +#240605 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#240606 = FACE_BOUND('',#240607,.F.); +#240607 = EDGE_LOOP('',(#240608,#240619,#240627,#240635,#240643,#240651, + #240659,#240667,#240675,#240683)); +#240608 = ORIENTED_EDGE('',*,*,#240609,.T.); +#240609 = EDGE_CURVE('',#240610,#240612,#240614,.T.); +#240610 = VERTEX_POINT('',#240611); +#240611 = CARTESIAN_POINT('',(177.586803,-51.272834,1.585)); +#240612 = VERTEX_POINT('',#240613); +#240613 = CARTESIAN_POINT('',(177.199467,-51.272834,1.585)); +#240614 = CIRCLE('',#240615,0.358503491901); +#240615 = AXIS2_PLACEMENT_3D('',#240616,#240617,#240618); +#240616 = CARTESIAN_POINT('',(177.393135,-51.574525,1.585)); +#240617 = DIRECTION('',(0.,0.,1.)); +#240618 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#240619 = ORIENTED_EDGE('',*,*,#240620,.T.); +#240620 = EDGE_CURVE('',#240612,#240621,#240623,.T.); +#240621 = VERTEX_POINT('',#240622); +#240622 = CARTESIAN_POINT('',(177.16906,-51.303241,1.585)); +#240623 = LINE('',#240624,#240625); +#240624 = CARTESIAN_POINT('',(177.199467,-51.272834,1.585)); +#240625 = VECTOR('',#240626,1.); +#240626 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#240627 = ORIENTED_EDGE('',*,*,#240628,.T.); +#240628 = EDGE_CURVE('',#240621,#240629,#240631,.T.); +#240629 = VERTEX_POINT('',#240630); +#240630 = CARTESIAN_POINT('',(177.134802,-51.371757,1.585)); +#240631 = LINE('',#240632,#240633); +#240632 = CARTESIAN_POINT('',(177.16906,-51.303241,1.585)); +#240633 = VECTOR('',#240634,1.); +#240634 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#240635 = ORIENTED_EDGE('',*,*,#240636,.T.); +#240636 = EDGE_CURVE('',#240629,#240637,#240639,.T.); +#240637 = VERTEX_POINT('',#240638); +#240638 = CARTESIAN_POINT('',(177.134802,-51.526823,1.585)); +#240639 = LINE('',#240640,#240641); +#240640 = CARTESIAN_POINT('',(177.134802,-51.371757,1.585)); +#240641 = VECTOR('',#240642,1.); +#240642 = DIRECTION('',(0.,-1.,0.)); +#240643 = ORIENTED_EDGE('',*,*,#240644,.T.); +#240644 = EDGE_CURVE('',#240637,#240645,#240647,.T.); +#240645 = VERTEX_POINT('',#240646); +#240646 = CARTESIAN_POINT('',(177.153773,-51.564766,1.585)); +#240647 = LINE('',#240648,#240649); +#240648 = CARTESIAN_POINT('',(177.134802,-51.526823,1.585)); +#240649 = VECTOR('',#240650,1.); +#240650 = DIRECTION('',(0.447204166258,-0.894431905559,0.)); +#240651 = ORIENTED_EDGE('',*,*,#240652,.T.); +#240652 = EDGE_CURVE('',#240645,#240653,#240655,.T.); +#240653 = VERTEX_POINT('',#240654); +#240654 = CARTESIAN_POINT('',(177.632498,-51.564766,1.585)); +#240655 = LINE('',#240656,#240657); +#240656 = CARTESIAN_POINT('',(177.153773,-51.564766,1.585)); +#240657 = VECTOR('',#240658,1.); +#240658 = DIRECTION('',(1.,0.,0.)); +#240659 = ORIENTED_EDGE('',*,*,#240660,.T.); +#240660 = EDGE_CURVE('',#240653,#240661,#240663,.T.); +#240661 = VERTEX_POINT('',#240662); +#240662 = CARTESIAN_POINT('',(177.651469,-51.526823,1.585)); +#240663 = LINE('',#240664,#240665); +#240664 = CARTESIAN_POINT('',(177.632498,-51.564766,1.585)); +#240665 = VECTOR('',#240666,1.); +#240666 = DIRECTION('',(0.447204166258,0.894431905559,0.)); +#240667 = ORIENTED_EDGE('',*,*,#240668,.T.); +#240668 = EDGE_CURVE('',#240661,#240669,#240671,.T.); +#240669 = VERTEX_POINT('',#240670); +#240670 = CARTESIAN_POINT('',(177.651469,-51.371757,1.585)); +#240671 = LINE('',#240672,#240673); +#240672 = CARTESIAN_POINT('',(177.651469,-51.526823,1.585)); +#240673 = VECTOR('',#240674,1.); +#240674 = DIRECTION('',(0.,1.,0.)); +#240675 = ORIENTED_EDGE('',*,*,#240676,.T.); +#240676 = EDGE_CURVE('',#240669,#240677,#240679,.T.); +#240677 = VERTEX_POINT('',#240678); +#240678 = CARTESIAN_POINT('',(177.617211,-51.303241,1.585)); +#240679 = LINE('',#240680,#240681); +#240680 = CARTESIAN_POINT('',(177.651469,-51.371757,1.585)); +#240681 = VECTOR('',#240682,1.); +#240682 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#240683 = ORIENTED_EDGE('',*,*,#240684,.T.); +#240684 = EDGE_CURVE('',#240677,#240610,#240685,.T.); +#240685 = LINE('',#240686,#240687); +#240686 = CARTESIAN_POINT('',(177.617211,-51.303241,1.585)); +#240687 = VECTOR('',#240688,1.); +#240688 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#240689 = PLANE('',#240690); +#240690 = AXIS2_PLACEMENT_3D('',#240691,#240692,#240693); +#240691 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240692 = DIRECTION('',(0.,0.,1.)); +#240693 = DIRECTION('',(1.,0.,-0.)); +#240694 = SHELL_BASED_SURFACE_MODEL('',(#240695)); +#240695 = OPEN_SHELL('',(#240696)); +#240696 = ADVANCED_FACE('',(#240697),#240799,.T.); +#240697 = FACE_BOUND('',#240698,.F.); +#240698 = EDGE_LOOP('',(#240699,#240709,#240718,#240726,#240734,#240743, + #240751,#240759,#240768,#240776,#240784,#240793)); +#240699 = ORIENTED_EDGE('',*,*,#240700,.T.); +#240700 = EDGE_CURVE('',#240701,#240703,#240705,.T.); +#240701 = VERTEX_POINT('',#240702); +#240702 = CARTESIAN_POINT('',(127.509596,-51.264735,1.585)); +#240703 = VERTEX_POINT('',#240704); +#240704 = CARTESIAN_POINT('',(127.923541,-50.988773,1.585)); +#240705 = LINE('',#240706,#240707); +#240706 = CARTESIAN_POINT('',(127.509596,-51.264735,1.585)); +#240707 = VECTOR('',#240708,1.); +#240708 = DIRECTION('',(0.832051531292,0.55469834079,0.)); +#240709 = ORIENTED_EDGE('',*,*,#240710,.T.); +#240710 = EDGE_CURVE('',#240703,#240711,#240713,.T.); +#240711 = VERTEX_POINT('',#240712); +#240712 = CARTESIAN_POINT('',(127.995652,-51.096939,1.585)); +#240713 = CIRCLE('',#240714,6.499976899535E-02); +#240714 = AXIS2_PLACEMENT_3D('',#240715,#240716,#240717); +#240715 = CARTESIAN_POINT('',(127.95959612917,-51.04285624722,1.585)); +#240716 = DIRECTION('',(0.,0.,-1.)); +#240717 = DIRECTION('',(-0.554696266276,0.832052914291,-0.)); +#240718 = ORIENTED_EDGE('',*,*,#240719,.T.); +#240719 = EDGE_CURVE('',#240711,#240720,#240722,.T.); +#240720 = VERTEX_POINT('',#240721); +#240721 = CARTESIAN_POINT('',(127.626776,-51.342856,1.585)); +#240722 = LINE('',#240723,#240724); +#240723 = CARTESIAN_POINT('',(127.995652,-51.096939,1.585)); +#240724 = VECTOR('',#240725,1.); +#240725 = DIRECTION('',(-0.832050641359,-0.554699675693,0.)); +#240726 = ORIENTED_EDGE('',*,*,#240727,.T.); +#240727 = EDGE_CURVE('',#240720,#240728,#240730,.T.); +#240728 = VERTEX_POINT('',#240729); +#240729 = CARTESIAN_POINT('',(127.995652,-51.588773,1.585)); +#240730 = LINE('',#240731,#240732); +#240731 = CARTESIAN_POINT('',(127.626776,-51.342856,1.585)); +#240732 = VECTOR('',#240733,1.); +#240733 = DIRECTION('',(0.832050641359,-0.554699675693,0.)); +#240734 = ORIENTED_EDGE('',*,*,#240735,.T.); +#240735 = EDGE_CURVE('',#240728,#240736,#240738,.T.); +#240736 = VERTEX_POINT('',#240737); +#240737 = CARTESIAN_POINT('',(127.923541,-51.696939,1.585)); +#240738 = CIRCLE('',#240739,6.49997689954E-02); +#240739 = AXIS2_PLACEMENT_3D('',#240740,#240741,#240742); +#240740 = CARTESIAN_POINT('',(127.95959687747,-51.64285625164,1.585)); +#240741 = DIRECTION('',(0.,0.,-1.)); +#240742 = DIRECTION('',(0.554696164107,0.832052982402,0.)); +#240743 = ORIENTED_EDGE('',*,*,#240744,.T.); +#240744 = EDGE_CURVE('',#240736,#240745,#240747,.T.); +#240745 = VERTEX_POINT('',#240746); +#240746 = CARTESIAN_POINT('',(127.509596,-51.420976,1.585)); +#240747 = LINE('',#240748,#240749); +#240748 = CARTESIAN_POINT('',(127.923541,-51.696939,1.585)); +#240749 = VECTOR('',#240750,1.); +#240750 = DIRECTION('',(-0.832050603576,0.554699732367,0.)); +#240751 = ORIENTED_EDGE('',*,*,#240752,.T.); +#240752 = EDGE_CURVE('',#240745,#240753,#240755,.T.); +#240753 = VERTEX_POINT('',#240754); +#240754 = CARTESIAN_POINT('',(127.095653,-51.696939,1.585)); +#240755 = LINE('',#240756,#240757); +#240756 = CARTESIAN_POINT('',(127.509596,-51.420976,1.585)); +#240757 = VECTOR('',#240758,1.); +#240758 = DIRECTION('',(-0.832049366618,-0.554701587803,0.)); +#240759 = ORIENTED_EDGE('',*,*,#240760,.T.); +#240760 = EDGE_CURVE('',#240753,#240761,#240763,.T.); +#240761 = VERTEX_POINT('',#240762); +#240762 = CARTESIAN_POINT('',(127.023541,-51.588773,1.585)); +#240763 = CIRCLE('',#240764,6.500004634766E-02); +#240764 = AXIS2_PLACEMENT_3D('',#240765,#240766,#240767); +#240765 = CARTESIAN_POINT('',(127.05959737004,-51.6428557533,1.585)); +#240766 = DIRECTION('',(0.,0.,-1.)); +#240767 = DIRECTION('',(0.554701603836,-0.832049355929,0.)); +#240768 = ORIENTED_EDGE('',*,*,#240769,.T.); +#240769 = EDGE_CURVE('',#240761,#240770,#240772,.T.); +#240770 = VERTEX_POINT('',#240771); +#240771 = CARTESIAN_POINT('',(127.392416,-51.342856,1.585)); +#240772 = LINE('',#240773,#240774); +#240773 = CARTESIAN_POINT('',(127.023541,-51.588773,1.585)); +#240774 = VECTOR('',#240775,1.); +#240775 = DIRECTION('',(0.832049947316,0.554700716758,0.)); +#240776 = ORIENTED_EDGE('',*,*,#240777,.T.); +#240777 = EDGE_CURVE('',#240770,#240778,#240780,.T.); +#240778 = VERTEX_POINT('',#240779); +#240779 = CARTESIAN_POINT('',(127.023541,-51.096939,1.585)); +#240780 = LINE('',#240781,#240782); +#240781 = CARTESIAN_POINT('',(127.392416,-51.342856,1.585)); +#240782 = VECTOR('',#240783,1.); +#240783 = DIRECTION('',(-0.832049947316,0.554700716758,0.)); +#240784 = ORIENTED_EDGE('',*,*,#240785,.T.); +#240785 = EDGE_CURVE('',#240778,#240786,#240788,.T.); +#240786 = VERTEX_POINT('',#240787); +#240787 = CARTESIAN_POINT('',(127.095653,-50.988773,1.585)); +#240788 = CIRCLE('',#240789,6.500004634723E-02); +#240789 = AXIS2_PLACEMENT_3D('',#240790,#240791,#240792); +#240790 = CARTESIAN_POINT('',(127.05959731405,-51.04285620937,1.585)); +#240791 = DIRECTION('',(0.,0.,-1.)); +#240792 = DIRECTION('',(-0.554712128406,-0.832042339427,-0.)); +#240793 = ORIENTED_EDGE('',*,*,#240794,.T.); +#240794 = EDGE_CURVE('',#240786,#240701,#240795,.T.); +#240795 = LINE('',#240796,#240797); +#240796 = CARTESIAN_POINT('',(127.095653,-50.988773,1.585)); +#240797 = VECTOR('',#240798,1.); +#240798 = DIRECTION('',(0.832050294338,-0.554700196225,0.)); +#240799 = PLANE('',#240800); +#240800 = AXIS2_PLACEMENT_3D('',#240801,#240802,#240803); +#240801 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240802 = DIRECTION('',(0.,0.,1.)); +#240803 = DIRECTION('',(1.,0.,-0.)); +#240804 = SHELL_BASED_SURFACE_MODEL('',(#240805)); +#240805 = OPEN_SHELL('',(#240806)); +#240806 = ADVANCED_FACE('',(#240807),#240867,.T.); +#240807 = FACE_BOUND('',#240808,.F.); +#240808 = EDGE_LOOP('',(#240809,#240820,#240828,#240837,#240845,#240853, + #240861)); +#240809 = ORIENTED_EDGE('',*,*,#240810,.T.); +#240810 = EDGE_CURVE('',#240811,#240813,#240815,.T.); +#240811 = VERTEX_POINT('',#240812); +#240812 = CARTESIAN_POINT('',(84.763037,-50.748267,1.585)); +#240813 = VERTEX_POINT('',#240814); +#240814 = CARTESIAN_POINT('',(84.81165,-50.6531,1.585)); +#240815 = CIRCLE('',#240816,5.999933016277E-02); +#240816 = AXIS2_PLACEMENT_3D('',#240817,#240818,#240819); +#240817 = CARTESIAN_POINT('',(84.811649288754,-50.71309933015,1.585)); +#240818 = DIRECTION('',(0.,0.,-1.)); +#240819 = DIRECTION('',(-0.810213857757,-0.586134374268,-0.)); +#240820 = ORIENTED_EDGE('',*,*,#240821,.T.); +#240821 = EDGE_CURVE('',#240813,#240822,#240824,.T.); +#240822 = VERTEX_POINT('',#240823); +#240823 = CARTESIAN_POINT('',(85.49165,-50.6531,1.585)); +#240824 = LINE('',#240825,#240826); +#240825 = CARTESIAN_POINT('',(84.81165,-50.6531,1.585)); +#240826 = VECTOR('',#240827,1.); +#240827 = DIRECTION('',(1.,0.,0.)); +#240828 = ORIENTED_EDGE('',*,*,#240829,.T.); +#240829 = EDGE_CURVE('',#240822,#240830,#240832,.T.); +#240830 = VERTEX_POINT('',#240831); +#240831 = CARTESIAN_POINT('',(85.540263,-50.748267,1.585)); +#240832 = CIRCLE('',#240833,6.000013845259E-02); +#240833 = AXIS2_PLACEMENT_3D('',#240834,#240835,#240836); +#240834 = CARTESIAN_POINT('',(85.491649128906,-50.71310013844,1.585)); +#240835 = DIRECTION('',(0.,0.,-1.)); +#240836 = DIRECTION('',(1.451820792249E-05,0.999999999895,0.)); +#240837 = ORIENTED_EDGE('',*,*,#240838,.T.); +#240838 = EDGE_CURVE('',#240830,#240839,#240841,.T.); +#240839 = VERTEX_POINT('',#240840); +#240840 = CARTESIAN_POINT('',(85.200263,-51.218267,1.585)); +#240841 = LINE('',#240842,#240843); +#240842 = CARTESIAN_POINT('',(85.540263,-50.748267,1.585)); +#240843 = VECTOR('',#240844,1.); +#240844 = DIRECTION('',(-0.586119786529,-0.81022441079,0.)); +#240845 = ORIENTED_EDGE('',*,*,#240846,.T.); +#240846 = EDGE_CURVE('',#240839,#240847,#240849,.T.); +#240847 = VERTEX_POINT('',#240848); +#240848 = CARTESIAN_POINT('',(85.161158,-51.242342,1.585)); +#240849 = LINE('',#240850,#240851); +#240850 = CARTESIAN_POINT('',(85.200263,-51.218267,1.585)); +#240851 = VECTOR('',#240852,1.); +#240852 = DIRECTION('',(-0.851557364128,-0.524261438215,0.)); +#240853 = ORIENTED_EDGE('',*,*,#240854,.T.); +#240854 = EDGE_CURVE('',#240847,#240855,#240857,.T.); +#240855 = VERTEX_POINT('',#240856); +#240856 = CARTESIAN_POINT('',(85.116483,-51.231713,1.585)); +#240857 = LINE('',#240858,#240859); +#240858 = CARTESIAN_POINT('',(85.161158,-51.242342,1.585)); +#240859 = VECTOR('',#240860,1.); +#240860 = DIRECTION('',(-0.972844986713,0.231457624259,0.)); +#240861 = ORIENTED_EDGE('',*,*,#240862,.T.); +#240862 = EDGE_CURVE('',#240855,#240811,#240863,.T.); +#240863 = LINE('',#240864,#240865); +#240864 = CARTESIAN_POINT('',(85.116483,-51.231713,1.585)); +#240865 = VECTOR('',#240866,1.); +#240866 = DIRECTION('',(-0.590189148022,0.807264993393,0.)); +#240867 = PLANE('',#240868); +#240868 = AXIS2_PLACEMENT_3D('',#240869,#240870,#240871); +#240869 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240870 = DIRECTION('',(0.,0.,1.)); +#240871 = DIRECTION('',(1.,0.,-0.)); +#240872 = SHELL_BASED_SURFACE_MODEL('',(#240873)); +#240873 = OPEN_SHELL('',(#240874)); +#240874 = ADVANCED_FACE('',(#240875),#240936,.T.); +#240875 = FACE_BOUND('',#240876,.F.); +#240876 = EDGE_LOOP('',(#240877,#240888,#240896,#240905,#240913,#240921, + #240930)); +#240877 = ORIENTED_EDGE('',*,*,#240878,.T.); +#240878 = EDGE_CURVE('',#240879,#240881,#240883,.T.); +#240879 = VERTEX_POINT('',#240880); +#240880 = CARTESIAN_POINT('',(86.82165,-50.8731,1.585)); +#240881 = VERTEX_POINT('',#240882); +#240882 = CARTESIAN_POINT('',(86.88165,-50.8131,1.585)); +#240883 = CIRCLE('',#240884,5.999932016258E-02); +#240884 = AXIS2_PLACEMENT_3D('',#240885,#240886,#240887); +#240885 = CARTESIAN_POINT('',(86.881649320159,-50.87309932015,1.585)); +#240886 = DIRECTION('',(0.,0.,-1.)); +#240887 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#240888 = ORIENTED_EDGE('',*,*,#240889,.T.); +#240889 = EDGE_CURVE('',#240881,#240890,#240892,.T.); +#240890 = VERTEX_POINT('',#240891); +#240891 = CARTESIAN_POINT('',(93.30165,-50.8131,1.585)); +#240892 = LINE('',#240893,#240894); +#240893 = CARTESIAN_POINT('',(86.88165,-50.8131,1.585)); +#240894 = VECTOR('',#240895,1.); +#240895 = DIRECTION('',(1.,0.,0.)); +#240896 = ORIENTED_EDGE('',*,*,#240897,.T.); +#240897 = EDGE_CURVE('',#240890,#240898,#240900,.T.); +#240898 = VERTEX_POINT('',#240899); +#240899 = CARTESIAN_POINT('',(93.30165,-50.9331,1.585)); +#240900 = CIRCLE('',#240901,6.000000000043E-02); +#240901 = AXIS2_PLACEMENT_3D('',#240902,#240903,#240904); +#240902 = CARTESIAN_POINT('',(93.301650225588,-50.8731,1.585)); +#240903 = DIRECTION('',(0.,0.,-1.)); +#240904 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#240905 = ORIENTED_EDGE('',*,*,#240906,.T.); +#240906 = EDGE_CURVE('',#240898,#240907,#240909,.T.); +#240907 = VERTEX_POINT('',#240908); +#240908 = CARTESIAN_POINT('',(86.94165,-50.9331,1.585)); +#240909 = LINE('',#240910,#240911); +#240910 = CARTESIAN_POINT('',(93.30165,-50.9331,1.585)); +#240911 = VECTOR('',#240912,1.); +#240912 = DIRECTION('',(-1.,0.,0.)); +#240913 = ORIENTED_EDGE('',*,*,#240914,.T.); +#240914 = EDGE_CURVE('',#240907,#240915,#240917,.T.); +#240915 = VERTEX_POINT('',#240916); +#240916 = CARTESIAN_POINT('',(86.94165,-51.1431,1.585)); +#240917 = LINE('',#240918,#240919); +#240918 = CARTESIAN_POINT('',(86.94165,-50.9331,1.585)); +#240919 = VECTOR('',#240920,1.); +#240920 = DIRECTION('',(0.,-1.,0.)); +#240921 = ORIENTED_EDGE('',*,*,#240922,.T.); +#240922 = EDGE_CURVE('',#240915,#240923,#240925,.T.); +#240923 = VERTEX_POINT('',#240924); +#240924 = CARTESIAN_POINT('',(86.82165,-51.1431,1.585)); +#240925 = CIRCLE('',#240926,6.000000000042E-02); +#240926 = AXIS2_PLACEMENT_3D('',#240927,#240928,#240929); +#240927 = CARTESIAN_POINT('',(86.88165,-51.14310022558,1.585)); +#240928 = DIRECTION('',(0.,0.,-1.)); +#240929 = DIRECTION('',(0.999999999993,3.759794372108E-06,0.)); +#240930 = ORIENTED_EDGE('',*,*,#240931,.T.); +#240931 = EDGE_CURVE('',#240923,#240879,#240932,.T.); +#240932 = LINE('',#240933,#240934); +#240933 = CARTESIAN_POINT('',(86.82165,-51.1431,1.585)); +#240934 = VECTOR('',#240935,1.); +#240935 = DIRECTION('',(0.,1.,0.)); +#240936 = PLANE('',#240937); +#240937 = AXIS2_PLACEMENT_3D('',#240938,#240939,#240940); +#240938 = CARTESIAN_POINT('',(0.,0.,1.585)); +#240939 = DIRECTION('',(0.,0.,1.)); +#240940 = DIRECTION('',(1.,0.,-0.)); +#240941 = SHELL_BASED_SURFACE_MODEL('',(#240942)); +#240942 = OPEN_SHELL('',(#240943)); +#240943 = ADVANCED_FACE('',(#240944,#241055),#241114,.T.); +#240944 = FACE_BOUND('',#240945,.F.); +#240945 = EDGE_LOOP('',(#240946,#240956,#240965,#240973,#240981,#240989, + #240998,#241006,#241015,#241023,#241032,#241040,#241049)); +#240946 = ORIENTED_EDGE('',*,*,#240947,.T.); +#240947 = EDGE_CURVE('',#240948,#240950,#240952,.T.); +#240948 = VERTEX_POINT('',#240949); +#240949 = CARTESIAN_POINT('',(177.325168,-50.502936,1.585)); +#240950 = VERTEX_POINT('',#240951); +#240951 = CARTESIAN_POINT('',(177.696273,-50.244923,1.585)); +#240952 = LINE('',#240953,#240954); +#240953 = CARTESIAN_POINT('',(177.325168,-50.502936,1.585)); +#240954 = VECTOR('',#240955,1.); +#240955 = DIRECTION('',(0.821057638293,0.570845298309,0.)); +#240956 = ORIENTED_EDGE('',*,*,#240957,.T.); +#240957 = EDGE_CURVE('',#240950,#240958,#240960,.T.); +#240958 = VERTEX_POINT('',#240959); +#240959 = CARTESIAN_POINT('',(177.769479,-50.375018,1.585)); +#240960 = CIRCLE('',#240961,7.500005951702E-02); +#240961 = AXIS2_PLACEMENT_3D('',#240962,#240963,#240964); +#240962 = CARTESIAN_POINT('',(177.72646874739,-50.31357593705,1.585)); +#240963 = DIRECTION('',(0.,0.,-1.)); +#240964 = DIRECTION('',(-0.402609645791,0.915371767708,-0.)); +#240965 = ORIENTED_EDGE('',*,*,#240966,.T.); +#240966 = EDGE_CURVE('',#240958,#240967,#240969,.T.); +#240967 = VERTEX_POINT('',#240968); +#240968 = CARTESIAN_POINT('',(177.325278,-50.685958,1.585)); +#240969 = LINE('',#240970,#240971); +#240970 = CARTESIAN_POINT('',(177.769479,-50.375018,1.585)); +#240971 = VECTOR('',#240972,1.); +#240972 = DIRECTION('',(-0.819232527028,-0.573461477921,0.)); +#240973 = ORIENTED_EDGE('',*,*,#240974,.T.); +#240974 = EDGE_CURVE('',#240967,#240975,#240977,.T.); +#240975 = VERTEX_POINT('',#240976); +#240976 = CARTESIAN_POINT('',(177.325278,-50.810004,1.585)); +#240977 = LINE('',#240978,#240979); +#240978 = CARTESIAN_POINT('',(177.325278,-50.685958,1.585)); +#240979 = VECTOR('',#240980,1.); +#240980 = DIRECTION('',(0.,-1.,0.)); +#240981 = ORIENTED_EDGE('',*,*,#240982,.T.); +#240982 = EDGE_CURVE('',#240975,#240983,#240985,.T.); +#240983 = VERTEX_POINT('',#240984); +#240984 = CARTESIAN_POINT('',(177.741101,-50.811445,1.585)); +#240985 = LINE('',#240986,#240987); +#240986 = CARTESIAN_POINT('',(177.325278,-50.810004,1.585)); +#240987 = VECTOR('',#240988,1.); +#240988 = DIRECTION('',(0.999993995497,-3.465395967783E-03,0.)); +#240989 = ORIENTED_EDGE('',*,*,#240990,.T.); +#240990 = EDGE_CURVE('',#240983,#240991,#240993,.T.); +#240991 = VERTEX_POINT('',#240992); +#240992 = CARTESIAN_POINT('',(177.726469,-50.960004,1.585)); +#240993 = CIRCLE('',#240994,7.500006711464E-02); +#240994 = AXIS2_PLACEMENT_3D('',#240995,#240996,#240997); +#240995 = CARTESIAN_POINT('',(177.72646906711,-50.88500393288,1.585)); +#240996 = DIRECTION('',(0.,0.,-1.)); +#240997 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#240998 = ORIENTED_EDGE('',*,*,#240999,.T.); +#240999 = EDGE_CURVE('',#240991,#241000,#241002,.T.); +#241000 = VERTEX_POINT('',#241001); +#241001 = CARTESIAN_POINT('',(176.711837,-50.958563,1.585)); +#241002 = LINE('',#241003,#241004); +#241003 = CARTESIAN_POINT('',(177.726469,-50.960004,1.585)); +#241004 = VECTOR('',#241005,1.); +#241005 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#241006 = ORIENTED_EDGE('',*,*,#241007,.T.); +#241007 = EDGE_CURVE('',#241000,#241008,#241010,.T.); +#241008 = VERTEX_POINT('',#241009); +#241009 = CARTESIAN_POINT('',(176.651469,-50.885004,1.585)); +#241010 = CIRCLE('',#241011,7.500074938983E-02); +#241011 = AXIS2_PLACEMENT_3D('',#241012,#241013,#241014); +#241012 = CARTESIAN_POINT('',(176.72646974938,-50.88500353389,1.585)); +#241013 = DIRECTION('',(0.,0.,-1.)); +#241014 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#241015 = ORIENTED_EDGE('',*,*,#241016,.T.); +#241016 = EDGE_CURVE('',#241008,#241017,#241019,.T.); +#241017 = VERTEX_POINT('',#241018); +#241018 = CARTESIAN_POINT('',(176.654132,-50.484243,1.585)); +#241019 = LINE('',#241020,#241021); +#241020 = CARTESIAN_POINT('',(176.651469,-50.885004,1.585)); +#241021 = VECTOR('',#241022,1.); +#241022 = DIRECTION('',(6.644711463246E-03,0.999977923661,0.)); +#241023 = ORIENTED_EDGE('',*,*,#241024,.T.); +#241024 = EDGE_CURVE('',#241017,#241025,#241027,.T.); +#241025 = VERTEX_POINT('',#241026); +#241026 = CARTESIAN_POINT('',(176.902313,-50.240017,1.585)); +#241027 = CIRCLE('',#241028,0.348621382901); +#241028 = AXIS2_PLACEMENT_3D('',#241029,#241030,#241031); +#241029 = CARTESIAN_POINT('',(176.99007322951,-50.57741144383,1.585)); +#241030 = DIRECTION('',(0.,0.,-1.)); +#241031 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#241032 = ORIENTED_EDGE('',*,*,#241033,.T.); +#241033 = EDGE_CURVE('',#241025,#241034,#241036,.T.); +#241034 = VERTEX_POINT('',#241035); +#241035 = CARTESIAN_POINT('',(177.074434,-50.240017,1.585)); +#241036 = LINE('',#241037,#241038); +#241037 = CARTESIAN_POINT('',(176.902313,-50.240017,1.585)); +#241038 = VECTOR('',#241039,1.); +#241039 = DIRECTION('',(1.,0.,0.)); +#241040 = ORIENTED_EDGE('',*,*,#241041,.T.); +#241041 = EDGE_CURVE('',#241034,#241042,#241044,.T.); +#241042 = VERTEX_POINT('',#241043); +#241043 = CARTESIAN_POINT('',(177.323837,-50.48942,1.585)); +#241044 = CIRCLE('',#241045,0.347870264855); +#241045 = AXIS2_PLACEMENT_3D('',#241046,#241047,#241048); +#241046 = CARTESIAN_POINT('',(176.98710626502,-50.57674773497,1.585)); +#241047 = DIRECTION('',(0.,0.,-1.)); +#241048 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#241049 = ORIENTED_EDGE('',*,*,#241050,.T.); +#241050 = EDGE_CURVE('',#241042,#240948,#241051,.T.); +#241051 = LINE('',#241052,#241053); +#241052 = CARTESIAN_POINT('',(177.323837,-50.48942,1.585)); +#241053 = VECTOR('',#241054,1.); +#241054 = DIRECTION('',(9.800184053844E-02,-0.995186233451,0.)); +#241055 = FACE_BOUND('',#241056,.F.); +#241056 = EDGE_LOOP('',(#241057,#241068,#241076,#241084,#241092,#241100, + #241108)); +#241057 = ORIENTED_EDGE('',*,*,#241058,.T.); +#241058 = EDGE_CURVE('',#241059,#241061,#241063,.T.); +#241059 = VERTEX_POINT('',#241060); +#241060 = CARTESIAN_POINT('',(177.110613,-50.422834,1.585)); +#241061 = VERTEX_POINT('',#241062); +#241062 = CARTESIAN_POINT('',(176.835727,-50.453241,1.585)); +#241063 = CIRCLE('',#241064,0.198386215365); +#241064 = AXIS2_PLACEMENT_3D('',#241065,#241066,#241067); +#241065 = CARTESIAN_POINT('',(176.98880995783,-50.5794261753,1.585)); +#241066 = DIRECTION('',(0.,0.,1.)); +#241067 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#241068 = ORIENTED_EDGE('',*,*,#241069,.T.); +#241069 = EDGE_CURVE('',#241061,#241070,#241072,.T.); +#241070 = VERTEX_POINT('',#241071); +#241071 = CARTESIAN_POINT('',(176.801469,-50.521757,1.585)); +#241072 = LINE('',#241073,#241074); +#241073 = CARTESIAN_POINT('',(176.835727,-50.453241,1.585)); +#241074 = VECTOR('',#241075,1.); +#241075 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#241076 = ORIENTED_EDGE('',*,*,#241077,.T.); +#241077 = EDGE_CURVE('',#241070,#241078,#241080,.T.); +#241078 = VERTEX_POINT('',#241079); +#241079 = CARTESIAN_POINT('',(176.801469,-50.810004,1.585)); +#241080 = LINE('',#241081,#241082); +#241081 = CARTESIAN_POINT('',(176.801469,-50.521757,1.585)); +#241082 = VECTOR('',#241083,1.); +#241083 = DIRECTION('',(0.,-1.,0.)); +#241084 = ORIENTED_EDGE('',*,*,#241085,.T.); +#241085 = EDGE_CURVE('',#241078,#241086,#241088,.T.); +#241086 = VERTEX_POINT('',#241087); +#241087 = CARTESIAN_POINT('',(177.175278,-50.810004,1.585)); +#241088 = LINE('',#241089,#241090); +#241089 = CARTESIAN_POINT('',(176.801469,-50.810004,1.585)); +#241090 = VECTOR('',#241091,1.); +#241091 = DIRECTION('',(1.,0.,0.)); +#241092 = ORIENTED_EDGE('',*,*,#241093,.T.); +#241093 = EDGE_CURVE('',#241086,#241094,#241096,.T.); +#241094 = VERTEX_POINT('',#241095); +#241095 = CARTESIAN_POINT('',(177.175278,-50.521757,1.585)); +#241096 = LINE('',#241097,#241098); +#241097 = CARTESIAN_POINT('',(177.175278,-50.810004,1.585)); +#241098 = VECTOR('',#241099,1.); +#241099 = DIRECTION('',(0.,1.,0.)); +#241100 = ORIENTED_EDGE('',*,*,#241101,.T.); +#241101 = EDGE_CURVE('',#241094,#241102,#241104,.T.); +#241102 = VERTEX_POINT('',#241103); +#241103 = CARTESIAN_POINT('',(177.14102,-50.453241,1.585)); +#241104 = LINE('',#241105,#241106); +#241105 = CARTESIAN_POINT('',(177.175278,-50.521757,1.585)); +#241106 = VECTOR('',#241107,1.); +#241107 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#241108 = ORIENTED_EDGE('',*,*,#241109,.T.); +#241109 = EDGE_CURVE('',#241102,#241059,#241110,.T.); +#241110 = LINE('',#241111,#241112); +#241111 = CARTESIAN_POINT('',(177.14102,-50.453241,1.585)); +#241112 = VECTOR('',#241113,1.); +#241113 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241114 = PLANE('',#241115); +#241115 = AXIS2_PLACEMENT_3D('',#241116,#241117,#241118); +#241116 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241117 = DIRECTION('',(0.,0.,1.)); +#241118 = DIRECTION('',(1.,0.,-0.)); +#241119 = SHELL_BASED_SURFACE_MODEL('',(#241120)); +#241120 = OPEN_SHELL('',(#241121)); +#241121 = ADVANCED_FACE('',(#241122),#241158,.T.); +#241122 = FACE_BOUND('',#241123,.F.); +#241123 = EDGE_LOOP('',(#241124,#241135,#241143,#241152)); +#241124 = ORIENTED_EDGE('',*,*,#241125,.T.); +#241125 = EDGE_CURVE('',#241126,#241128,#241130,.T.); +#241126 = VERTEX_POINT('',#241127); +#241127 = CARTESIAN_POINT('',(162.05107,-50.7731,1.585)); +#241128 = VERTEX_POINT('',#241129); +#241129 = CARTESIAN_POINT('',(162.05107,-50.6531,1.585)); +#241130 = CIRCLE('',#241131,6.000000000042E-02); +#241131 = AXIS2_PLACEMENT_3D('',#241132,#241133,#241134); +#241132 = CARTESIAN_POINT('',(162.05106977441,-50.7131,1.585)); +#241133 = DIRECTION('',(0.,0.,-1.)); +#241134 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#241135 = ORIENTED_EDGE('',*,*,#241136,.T.); +#241136 = EDGE_CURVE('',#241128,#241137,#241139,.T.); +#241137 = VERTEX_POINT('',#241138); +#241138 = CARTESIAN_POINT('',(162.33223,-50.6531,1.585)); +#241139 = LINE('',#241140,#241141); +#241140 = CARTESIAN_POINT('',(162.05107,-50.6531,1.585)); +#241141 = VECTOR('',#241142,1.); +#241142 = DIRECTION('',(1.,0.,0.)); +#241143 = ORIENTED_EDGE('',*,*,#241144,.T.); +#241144 = EDGE_CURVE('',#241137,#241145,#241147,.T.); +#241145 = VERTEX_POINT('',#241146); +#241146 = CARTESIAN_POINT('',(162.33223,-50.7731,1.585)); +#241147 = CIRCLE('',#241148,6.000000000042E-02); +#241148 = AXIS2_PLACEMENT_3D('',#241149,#241150,#241151); +#241149 = CARTESIAN_POINT('',(162.33223022558,-50.7131,1.585)); +#241150 = DIRECTION('',(0.,0.,-1.)); +#241151 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#241152 = ORIENTED_EDGE('',*,*,#241153,.T.); +#241153 = EDGE_CURVE('',#241145,#241126,#241154,.T.); +#241154 = LINE('',#241155,#241156); +#241155 = CARTESIAN_POINT('',(162.33223,-50.7731,1.585)); +#241156 = VECTOR('',#241157,1.); +#241157 = DIRECTION('',(-1.,0.,0.)); +#241158 = PLANE('',#241159); +#241159 = AXIS2_PLACEMENT_3D('',#241160,#241161,#241162); +#241160 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241161 = DIRECTION('',(0.,0.,1.)); +#241162 = DIRECTION('',(1.,0.,-0.)); +#241163 = SHELL_BASED_SURFACE_MODEL('',(#241164)); +#241164 = OPEN_SHELL('',(#241165)); +#241165 = ADVANCED_FACE('',(#241166),#241202,.T.); +#241166 = FACE_BOUND('',#241167,.F.); +#241167 = EDGE_LOOP('',(#241168,#241179,#241187,#241196)); +#241168 = ORIENTED_EDGE('',*,*,#241169,.T.); +#241169 = EDGE_CURVE('',#241170,#241172,#241174,.T.); +#241170 = VERTEX_POINT('',#241171); +#241171 = CARTESIAN_POINT('',(179.480398,-50.5481,1.585)); +#241172 = VERTEX_POINT('',#241173); +#241173 = CARTESIAN_POINT('',(179.480398,-50.4281,1.585)); +#241174 = CIRCLE('',#241175,6.000000000042E-02); +#241175 = AXIS2_PLACEMENT_3D('',#241176,#241177,#241178); +#241176 = CARTESIAN_POINT('',(179.48039777441,-50.4881,1.585)); +#241177 = DIRECTION('',(0.,0.,-1.)); +#241178 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#241179 = ORIENTED_EDGE('',*,*,#241180,.T.); +#241180 = EDGE_CURVE('',#241172,#241181,#241183,.T.); +#241181 = VERTEX_POINT('',#241182); +#241182 = CARTESIAN_POINT('',(180.002902,-50.4281,1.585)); +#241183 = LINE('',#241184,#241185); +#241184 = CARTESIAN_POINT('',(179.480398,-50.4281,1.585)); +#241185 = VECTOR('',#241186,1.); +#241186 = DIRECTION('',(1.,0.,0.)); +#241187 = ORIENTED_EDGE('',*,*,#241188,.T.); +#241188 = EDGE_CURVE('',#241181,#241189,#241191,.T.); +#241189 = VERTEX_POINT('',#241190); +#241190 = CARTESIAN_POINT('',(180.002902,-50.5481,1.585)); +#241191 = CIRCLE('',#241192,6.000000000043E-02); +#241192 = AXIS2_PLACEMENT_3D('',#241193,#241194,#241195); +#241193 = CARTESIAN_POINT('',(180.00290222558,-50.4881,1.585)); +#241194 = DIRECTION('',(0.,0.,-1.)); +#241195 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#241196 = ORIENTED_EDGE('',*,*,#241197,.T.); +#241197 = EDGE_CURVE('',#241189,#241170,#241198,.T.); +#241198 = LINE('',#241199,#241200); +#241199 = CARTESIAN_POINT('',(180.002902,-50.5481,1.585)); +#241200 = VECTOR('',#241201,1.); +#241201 = DIRECTION('',(-1.,0.,0.)); +#241202 = PLANE('',#241203); +#241203 = AXIS2_PLACEMENT_3D('',#241204,#241205,#241206); +#241204 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241205 = DIRECTION('',(0.,0.,1.)); +#241206 = DIRECTION('',(1.,0.,-0.)); +#241207 = SHELL_BASED_SURFACE_MODEL('',(#241208)); +#241208 = OPEN_SHELL('',(#241209)); +#241209 = ADVANCED_FACE('',(#241210,#241398),#241532,.T.); +#241210 = FACE_BOUND('',#241211,.F.); +#241211 = EDGE_LOOP('',(#241212,#241223,#241231,#241239,#241247,#241255, + #241263,#241271,#241279,#241287,#241295,#241304,#241312,#241320, + #241328,#241336,#241344,#241352,#241360,#241368,#241376,#241384, + #241392)); +#241212 = ORIENTED_EDGE('',*,*,#241213,.T.); +#241213 = EDGE_CURVE('',#241214,#241216,#241218,.T.); +#241214 = VERTEX_POINT('',#241215); +#241215 = CARTESIAN_POINT('',(89.008957,-49.262418,1.585)); +#241216 = VERTEX_POINT('',#241217); +#241217 = CARTESIAN_POINT('',(89.477028,-49.267786,1.585)); +#241218 = CIRCLE('',#241219,0.397578964435); +#241219 = AXIS2_PLACEMENT_3D('',#241220,#241221,#241222); +#241220 = CARTESIAN_POINT('',(89.239306972123,-49.58646726061,1.585)); +#241221 = DIRECTION('',(0.,0.,-1.)); +#241222 = DIRECTION('',(-0.579381689497,0.815056352577,0.)); +#241223 = ORIENTED_EDGE('',*,*,#241224,.T.); +#241224 = EDGE_CURVE('',#241216,#241225,#241227,.T.); +#241225 = VERTEX_POINT('',#241226); +#241226 = CARTESIAN_POINT('',(89.587344,-49.379108,1.585)); +#241227 = LINE('',#241228,#241229); +#241228 = CARTESIAN_POINT('',(89.477028,-49.267786,1.585)); +#241229 = VECTOR('',#241230,1.); +#241230 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#241231 = ORIENTED_EDGE('',*,*,#241232,.T.); +#241232 = EDGE_CURVE('',#241225,#241233,#241235,.T.); +#241233 = VERTEX_POINT('',#241234); +#241234 = CARTESIAN_POINT('',(89.597744,-49.402586,1.585)); +#241235 = LINE('',#241236,#241237); +#241236 = CARTESIAN_POINT('',(89.587344,-49.379108,1.585)); +#241237 = VECTOR('',#241238,1.); +#241238 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#241239 = ORIENTED_EDGE('',*,*,#241240,.T.); +#241240 = EDGE_CURVE('',#241233,#241241,#241243,.T.); +#241241 = VERTEX_POINT('',#241242); +#241242 = CARTESIAN_POINT('',(89.647602,-49.611252,1.585)); +#241243 = LINE('',#241244,#241245); +#241244 = CARTESIAN_POINT('',(89.597744,-49.402586,1.585)); +#241245 = VECTOR('',#241246,1.); +#241246 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#241247 = ORIENTED_EDGE('',*,*,#241248,.T.); +#241248 = EDGE_CURVE('',#241241,#241249,#241251,.T.); +#241249 = VERTEX_POINT('',#241250); +#241250 = CARTESIAN_POINT('',(89.645363,-49.962775,1.585)); +#241251 = LINE('',#241252,#241253); +#241252 = CARTESIAN_POINT('',(89.647602,-49.611252,1.585)); +#241253 = VECTOR('',#241254,1.); +#241254 = DIRECTION('',(-6.369297552993E-03,-0.999979715819,0.)); +#241255 = ORIENTED_EDGE('',*,*,#241256,.T.); +#241256 = EDGE_CURVE('',#241249,#241257,#241259,.T.); +#241257 = VERTEX_POINT('',#241258); +#241258 = CARTESIAN_POINT('',(89.592797,-50.167097,1.585)); +#241259 = LINE('',#241260,#241261); +#241260 = CARTESIAN_POINT('',(89.645363,-49.962775,1.585)); +#241261 = VECTOR('',#241262,1.); +#241262 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#241263 = ORIENTED_EDGE('',*,*,#241264,.T.); +#241264 = EDGE_CURVE('',#241257,#241265,#241267,.T.); +#241265 = VERTEX_POINT('',#241266); +#241266 = CARTESIAN_POINT('',(89.578017,-50.188093,1.585)); +#241267 = LINE('',#241268,#241269); +#241268 = CARTESIAN_POINT('',(89.592797,-50.167097,1.585)); +#241269 = VECTOR('',#241270,1.); +#241270 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#241271 = ORIENTED_EDGE('',*,*,#241272,.T.); +#241272 = EDGE_CURVE('',#241265,#241273,#241275,.T.); +#241273 = VERTEX_POINT('',#241274); +#241274 = CARTESIAN_POINT('',(89.53581,-50.230299,1.585)); +#241275 = LINE('',#241276,#241277); +#241276 = CARTESIAN_POINT('',(89.578017,-50.188093,1.585)); +#241277 = VECTOR('',#241278,1.); +#241278 = DIRECTION('',(-0.707115157889,-0.707098404385,0.)); +#241279 = ORIENTED_EDGE('',*,*,#241280,.T.); +#241280 = EDGE_CURVE('',#241273,#241281,#241283,.T.); +#241281 = VERTEX_POINT('',#241282); +#241282 = CARTESIAN_POINT('',(89.56941,-50.263899,1.585)); +#241283 = LINE('',#241284,#241285); +#241284 = CARTESIAN_POINT('',(89.53581,-50.230299,1.585)); +#241285 = VECTOR('',#241286,1.); +#241286 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#241287 = ORIENTED_EDGE('',*,*,#241288,.T.); +#241288 = EDGE_CURVE('',#241281,#241289,#241291,.T.); +#241289 = VERTEX_POINT('',#241290); +#241290 = CARTESIAN_POINT('',(89.666205,-50.313907,1.585)); +#241291 = LINE('',#241292,#241293); +#241292 = CARTESIAN_POINT('',(89.56941,-50.263899,1.585)); +#241293 = VECTOR('',#241294,1.); +#241294 = DIRECTION('',(0.888436200035,-0.459000129049,0.)); +#241295 = ORIENTED_EDGE('',*,*,#241296,.T.); +#241296 = EDGE_CURVE('',#241289,#241297,#241299,.T.); +#241297 = VERTEX_POINT('',#241298); +#241298 = CARTESIAN_POINT('',(89.58668,-50.440239,1.585)); +#241299 = CIRCLE('',#241300,7.500029440362E-02); +#241300 = AXIS2_PLACEMENT_3D('',#241301,#241302,#241303); +#241301 = CARTESIAN_POINT('',(89.620221053971,-50.37315664867,1.585)); +#241302 = DIRECTION('',(0.,0.,-1.)); +#241303 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#241304 = ORIENTED_EDGE('',*,*,#241305,.T.); +#241305 = EDGE_CURVE('',#241297,#241306,#241308,.T.); +#241306 = VERTEX_POINT('',#241307); +#241307 = CARTESIAN_POINT('',(89.4777,-50.383291,1.585)); +#241308 = LINE('',#241309,#241310); +#241309 = CARTESIAN_POINT('',(89.58668,-50.440239,1.585)); +#241310 = VECTOR('',#241311,1.); +#241311 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#241312 = ORIENTED_EDGE('',*,*,#241313,.T.); +#241313 = EDGE_CURVE('',#241306,#241314,#241316,.T.); +#241314 = VERTEX_POINT('',#241315); +#241315 = CARTESIAN_POINT('',(89.414936,-50.321557,1.585)); +#241316 = LINE('',#241317,#241318); +#241317 = CARTESIAN_POINT('',(89.4777,-50.383291,1.585)); +#241318 = VECTOR('',#241319,1.); +#241319 = DIRECTION('',(-0.712932436518,0.701232729527,0.)); +#241320 = ORIENTED_EDGE('',*,*,#241321,.T.); +#241321 = EDGE_CURVE('',#241314,#241322,#241324,.T.); +#241322 = VERTEX_POINT('',#241323); +#241323 = CARTESIAN_POINT('',(89.349139,-50.351478,1.585)); +#241324 = LINE('',#241325,#241326); +#241325 = CARTESIAN_POINT('',(89.414936,-50.321557,1.585)); +#241326 = VECTOR('',#241327,1.); +#241327 = DIRECTION('',(-0.910297290062,-0.413955122816,0.)); +#241328 = ORIENTED_EDGE('',*,*,#241329,.T.); +#241329 = EDGE_CURVE('',#241322,#241330,#241332,.T.); +#241330 = VERTEX_POINT('',#241331); +#241331 = CARTESIAN_POINT('',(89.124221,-50.350256,1.585)); +#241332 = LINE('',#241333,#241334); +#241333 = CARTESIAN_POINT('',(89.349139,-50.351478,1.585)); +#241334 = VECTOR('',#241335,1.); +#241335 = DIRECTION('',(-0.999985241087,5.433010984478E-03,0.)); +#241336 = ORIENTED_EDGE('',*,*,#241337,.T.); +#241337 = EDGE_CURVE('',#241330,#241338,#241340,.T.); +#241338 = VERTEX_POINT('',#241339); +#241339 = CARTESIAN_POINT('',(89.00151,-50.288053,1.585)); +#241340 = LINE('',#241341,#241342); +#241341 = CARTESIAN_POINT('',(89.124221,-50.350256,1.585)); +#241342 = VECTOR('',#241343,1.); +#241343 = DIRECTION('',(-0.891949524562,0.452134986076,0.)); +#241344 = ORIENTED_EDGE('',*,*,#241345,.T.); +#241345 = EDGE_CURVE('',#241338,#241346,#241348,.T.); +#241346 = VERTEX_POINT('',#241347); +#241347 = CARTESIAN_POINT('',(88.891194,-50.176728,1.585)); +#241348 = LINE('',#241349,#241350); +#241349 = CARTESIAN_POINT('',(89.00151,-50.288053,1.585)); +#241350 = VECTOR('',#241351,1.); +#241351 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#241352 = ORIENTED_EDGE('',*,*,#241353,.T.); +#241353 = EDGE_CURVE('',#241346,#241354,#241356,.T.); +#241354 = VERTEX_POINT('',#241355); +#241355 = CARTESIAN_POINT('',(88.880794,-50.153251,1.585)); +#241356 = LINE('',#241357,#241358); +#241357 = CARTESIAN_POINT('',(88.891194,-50.176728,1.585)); +#241358 = VECTOR('',#241359,1.); +#241359 = DIRECTION('',(-0.405025228746,0.91430550916,0.)); +#241360 = ORIENTED_EDGE('',*,*,#241361,.T.); +#241361 = EDGE_CURVE('',#241354,#241362,#241364,.T.); +#241362 = VERTEX_POINT('',#241363); +#241363 = CARTESIAN_POINT('',(88.830936,-49.944585,1.585)); +#241364 = LINE('',#241365,#241366); +#241365 = CARTESIAN_POINT('',(88.880794,-50.153251,1.585)); +#241366 = VECTOR('',#241367,1.); +#241367 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#241368 = ORIENTED_EDGE('',*,*,#241369,.T.); +#241369 = EDGE_CURVE('',#241362,#241370,#241372,.T.); +#241370 = VERTEX_POINT('',#241371); +#241371 = CARTESIAN_POINT('',(88.833175,-49.593062,1.585)); +#241372 = LINE('',#241373,#241374); +#241373 = CARTESIAN_POINT('',(88.830936,-49.944585,1.585)); +#241374 = VECTOR('',#241375,1.); +#241375 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#241376 = ORIENTED_EDGE('',*,*,#241377,.T.); +#241377 = EDGE_CURVE('',#241370,#241378,#241380,.T.); +#241378 = VERTEX_POINT('',#241379); +#241379 = CARTESIAN_POINT('',(88.885741,-49.38874,1.585)); +#241380 = LINE('',#241381,#241382); +#241381 = CARTESIAN_POINT('',(88.833175,-49.593062,1.585)); +#241382 = VECTOR('',#241383,1.); +#241383 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#241384 = ORIENTED_EDGE('',*,*,#241385,.T.); +#241385 = EDGE_CURVE('',#241378,#241386,#241388,.T.); +#241386 = VERTEX_POINT('',#241387); +#241387 = CARTESIAN_POINT('',(88.900522,-49.367743,1.585)); +#241388 = LINE('',#241389,#241390); +#241389 = CARTESIAN_POINT('',(88.885741,-49.38874,1.585)); +#241390 = VECTOR('',#241391,1.); +#241391 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#241392 = ORIENTED_EDGE('',*,*,#241393,.T.); +#241393 = EDGE_CURVE('',#241386,#241214,#241394,.T.); +#241394 = LINE('',#241395,#241396); +#241395 = CARTESIAN_POINT('',(88.900522,-49.367743,1.585)); +#241396 = VECTOR('',#241397,1.); +#241397 = DIRECTION('',(0.717318581904,0.696745327975,0.)); +#241398 = FACE_BOUND('',#241399,.F.); +#241399 = EDGE_LOOP('',(#241400,#241411,#241419,#241428,#241436,#241444, + #241452,#241460,#241468,#241476,#241485,#241493,#241501,#241509, + #241517,#241526)); +#241400 = ORIENTED_EDGE('',*,*,#241401,.T.); +#241401 = EDGE_CURVE('',#241402,#241404,#241406,.T.); +#241402 = VERTEX_POINT('',#241403); +#241403 = CARTESIAN_POINT('',(89.385318,-49.387177,1.585)); +#241404 = VERTEX_POINT('',#241405); +#241405 = CARTESIAN_POINT('',(89.09322,-49.387177,1.585)); +#241406 = CIRCLE('',#241407,0.252889603602); +#241407 = AXIS2_PLACEMENT_3D('',#241408,#241409,#241410); +#241408 = CARTESIAN_POINT('',(89.239269,-49.59363,1.585)); +#241409 = DIRECTION('',(0.,0.,1.)); +#241410 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#241411 = ORIENTED_EDGE('',*,*,#241412,.T.); +#241412 = EDGE_CURVE('',#241404,#241413,#241415,.T.); +#241413 = VERTEX_POINT('',#241414); +#241414 = CARTESIAN_POINT('',(89.021277,-49.459119,1.585)); +#241415 = LINE('',#241416,#241417); +#241416 = CARTESIAN_POINT('',(89.09322,-49.387177,1.585)); +#241417 = VECTOR('',#241418,1.); +#241418 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#241419 = ORIENTED_EDGE('',*,*,#241420,.T.); +#241420 = EDGE_CURVE('',#241413,#241421,#241423,.T.); +#241421 = VERTEX_POINT('',#241422); +#241422 = CARTESIAN_POINT('',(89.021277,-50.096717,1.585)); +#241423 = CIRCLE('',#241424,0.985308713638); +#241424 = AXIS2_PLACEMENT_3D('',#241425,#241426,#241427); +#241425 = CARTESIAN_POINT('',(89.953586207704,-49.777918,1.585)); +#241426 = DIRECTION('',(0.,0.,1.)); +#241427 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#241428 = ORIENTED_EDGE('',*,*,#241429,.T.); +#241429 = EDGE_CURVE('',#241421,#241430,#241432,.T.); +#241430 = VERTEX_POINT('',#241431); +#241431 = CARTESIAN_POINT('',(89.09322,-50.168661,1.585)); +#241432 = LINE('',#241433,#241434); +#241433 = CARTESIAN_POINT('',(89.021277,-50.096717,1.585)); +#241434 = VECTOR('',#241435,1.); +#241435 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#241436 = ORIENTED_EDGE('',*,*,#241437,.T.); +#241437 = EDGE_CURVE('',#241430,#241438,#241440,.T.); +#241438 = VERTEX_POINT('',#241439); +#241439 = CARTESIAN_POINT('',(89.161736,-50.202919,1.585)); +#241440 = LINE('',#241441,#241442); +#241441 = CARTESIAN_POINT('',(89.09322,-50.168661,1.585)); +#241442 = VECTOR('',#241443,1.); +#241443 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#241444 = ORIENTED_EDGE('',*,*,#241445,.T.); +#241445 = EDGE_CURVE('',#241438,#241446,#241448,.T.); +#241446 = VERTEX_POINT('',#241447); +#241447 = CARTESIAN_POINT('',(89.296299,-50.202919,1.585)); +#241448 = LINE('',#241449,#241450); +#241449 = CARTESIAN_POINT('',(89.161736,-50.202919,1.585)); +#241450 = VECTOR('',#241451,1.); +#241451 = DIRECTION('',(1.,0.,0.)); +#241452 = ORIENTED_EDGE('',*,*,#241453,.T.); +#241453 = EDGE_CURVE('',#241446,#241454,#241456,.T.); +#241454 = VERTEX_POINT('',#241455); +#241455 = CARTESIAN_POINT('',(89.24246,-50.14908,1.585)); +#241456 = LINE('',#241457,#241458); +#241457 = CARTESIAN_POINT('',(89.296299,-50.202919,1.585)); +#241458 = VECTOR('',#241459,1.); +#241459 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241460 = ORIENTED_EDGE('',*,*,#241461,.T.); +#241461 = EDGE_CURVE('',#241454,#241462,#241464,.T.); +#241462 = VERTEX_POINT('',#241463); +#241463 = CARTESIAN_POINT('',(89.173945,-50.114823,1.585)); +#241464 = LINE('',#241465,#241466); +#241465 = CARTESIAN_POINT('',(89.24246,-50.14908,1.585)); +#241466 = VECTOR('',#241467,1.); +#241467 = DIRECTION('',(-0.894429801887,0.447208373688,0.)); +#241468 = ORIENTED_EDGE('',*,*,#241469,.T.); +#241469 = EDGE_CURVE('',#241462,#241470,#241472,.T.); +#241470 = VERTEX_POINT('',#241471); +#241471 = CARTESIAN_POINT('',(89.08178,-50.113382,1.585)); +#241472 = LINE('',#241473,#241474); +#241473 = CARTESIAN_POINT('',(89.173945,-50.114823,1.585)); +#241474 = VECTOR('',#241475,1.); +#241475 = DIRECTION('',(-0.999877795754,1.563309177758E-02,0.)); +#241476 = ORIENTED_EDGE('',*,*,#241477,.T.); +#241477 = EDGE_CURVE('',#241470,#241478,#241480,.T.); +#241478 = VERTEX_POINT('',#241479); +#241479 = CARTESIAN_POINT('',(89.096412,-49.964823,1.585)); +#241480 = CIRCLE('',#241481,7.500006711464E-02); +#241481 = AXIS2_PLACEMENT_3D('',#241482,#241483,#241484); +#241482 = CARTESIAN_POINT('',(89.096411932885,-50.03982306711,1.585)); +#241483 = DIRECTION('',(0.,0.,-1.)); +#241484 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#241485 = ORIENTED_EDGE('',*,*,#241486,.T.); +#241486 = EDGE_CURVE('',#241478,#241487,#241489,.T.); +#241487 = VERTEX_POINT('',#241488); +#241488 = CARTESIAN_POINT('',(89.211459,-49.967486,1.585)); +#241489 = LINE('',#241490,#241491); +#241490 = CARTESIAN_POINT('',(89.096412,-49.964823,1.585)); +#241491 = VECTOR('',#241492,1.); +#241492 = DIRECTION('',(0.999732214371,-2.31408631852E-02,0.)); +#241493 = ORIENTED_EDGE('',*,*,#241494,.T.); +#241494 = EDGE_CURVE('',#241487,#241495,#241497,.T.); +#241495 = VERTEX_POINT('',#241496); +#241496 = CARTESIAN_POINT('',(89.334171,-50.02969,1.585)); +#241497 = LINE('',#241498,#241499); +#241498 = CARTESIAN_POINT('',(89.211459,-49.967486,1.585)); +#241499 = VECTOR('',#241500,1.); +#241500 = DIRECTION('',(0.89194807915,-0.452137837501,0.)); +#241501 = ORIENTED_EDGE('',*,*,#241502,.T.); +#241502 = EDGE_CURVE('',#241495,#241503,#241505,.T.); +#241503 = VERTEX_POINT('',#241504); +#241504 = CARTESIAN_POINT('',(89.429744,-50.124233,1.585)); +#241505 = LINE('',#241506,#241507); +#241506 = CARTESIAN_POINT('',(89.334171,-50.02969,1.585)); +#241507 = VECTOR('',#241508,1.); +#241508 = DIRECTION('',(0.710927271905,-0.703265535954,0.)); +#241509 = ORIENTED_EDGE('',*,*,#241510,.T.); +#241510 = EDGE_CURVE('',#241503,#241511,#241513,.T.); +#241511 = VERTEX_POINT('',#241512); +#241512 = CARTESIAN_POINT('',(89.45726,-50.096717,1.585)); +#241513 = LINE('',#241514,#241515); +#241514 = CARTESIAN_POINT('',(89.429744,-50.124233,1.585)); +#241515 = VECTOR('',#241516,1.); +#241516 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#241517 = ORIENTED_EDGE('',*,*,#241518,.T.); +#241518 = EDGE_CURVE('',#241511,#241519,#241521,.T.); +#241519 = VERTEX_POINT('',#241520); +#241520 = CARTESIAN_POINT('',(89.45726,-49.459119,1.585)); +#241521 = CIRCLE('',#241522,0.985282207896); +#241522 = AXIS2_PLACEMENT_3D('',#241523,#241524,#241525); +#241523 = CARTESIAN_POINT('',(88.524978804868,-49.777918,1.585)); +#241524 = DIRECTION('',(0.,-0.,1.)); +#241525 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#241526 = ORIENTED_EDGE('',*,*,#241527,.T.); +#241527 = EDGE_CURVE('',#241519,#241402,#241528,.T.); +#241528 = LINE('',#241529,#241530); +#241529 = CARTESIAN_POINT('',(89.45726,-49.459119,1.585)); +#241530 = VECTOR('',#241531,1.); +#241531 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241532 = PLANE('',#241533); +#241533 = AXIS2_PLACEMENT_3D('',#241534,#241535,#241536); +#241534 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241535 = DIRECTION('',(0.,0.,1.)); +#241536 = DIRECTION('',(1.,0.,-0.)); +#241537 = SHELL_BASED_SURFACE_MODEL('',(#241538)); +#241538 = OPEN_SHELL('',(#241539)); +#241539 = ADVANCED_FACE('',(#241540),#241674,.T.); +#241540 = FACE_BOUND('',#241541,.F.); +#241541 = EDGE_LOOP('',(#241542,#241552,#241560,#241569,#241577,#241585, + #241594,#241602,#241611,#241619,#241627,#241635,#241643,#241652, + #241660,#241668)); +#241542 = ORIENTED_EDGE('',*,*,#241543,.T.); +#241543 = EDGE_CURVE('',#241544,#241546,#241548,.T.); +#241544 = VERTEX_POINT('',#241545); +#241545 = CARTESIAN_POINT('',(90.186181,-49.224941,1.585)); +#241546 = VERTEX_POINT('',#241547); +#241547 = CARTESIAN_POINT('',(90.224637,-49.20436,1.585)); +#241548 = LINE('',#241549,#241550); +#241549 = CARTESIAN_POINT('',(90.186181,-49.224941,1.585)); +#241550 = VECTOR('',#241551,1.); +#241551 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#241552 = ORIENTED_EDGE('',*,*,#241553,.T.); +#241553 = EDGE_CURVE('',#241546,#241554,#241556,.T.); +#241554 = VERTEX_POINT('',#241555); +#241555 = CARTESIAN_POINT('',(90.246474,-49.20436,1.585)); +#241556 = LINE('',#241557,#241558); +#241557 = CARTESIAN_POINT('',(90.224637,-49.20436,1.585)); +#241558 = VECTOR('',#241559,1.); +#241559 = DIRECTION('',(1.,0.,0.)); +#241560 = ORIENTED_EDGE('',*,*,#241561,.T.); +#241561 = EDGE_CURVE('',#241554,#241562,#241564,.T.); +#241562 = VERTEX_POINT('',#241563); +#241563 = CARTESIAN_POINT('',(90.314269,-49.277919,1.585)); +#241564 = CIRCLE('',#241565,7.216898094227E-02); +#241565 = AXIS2_PLACEMENT_3D('',#241566,#241567,#241568); +#241566 = CARTESIAN_POINT('',(90.242116063893,-49.27639728342,1.585)); +#241567 = DIRECTION('',(0.,0.,-1.)); +#241568 = DIRECTION('',(6.038516895265E-02,0.998175150648,0.)); +#241569 = ORIENTED_EDGE('',*,*,#241570,.T.); +#241570 = EDGE_CURVE('',#241562,#241571,#241573,.T.); +#241571 = VERTEX_POINT('',#241572); +#241572 = CARTESIAN_POINT('',(90.314269,-50.202919,1.585)); +#241573 = LINE('',#241574,#241575); +#241574 = CARTESIAN_POINT('',(90.314269,-49.277919,1.585)); +#241575 = VECTOR('',#241576,1.); +#241576 = DIRECTION('',(0.,-1.,0.)); +#241577 = ORIENTED_EDGE('',*,*,#241578,.T.); +#241578 = EDGE_CURVE('',#241571,#241579,#241581,.T.); +#241579 = VERTEX_POINT('',#241580); +#241580 = CARTESIAN_POINT('',(90.539615,-50.20436,1.585)); +#241581 = LINE('',#241582,#241583); +#241582 = CARTESIAN_POINT('',(90.314269,-50.202919,1.585)); +#241583 = VECTOR('',#241584,1.); +#241584 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#241585 = ORIENTED_EDGE('',*,*,#241586,.T.); +#241586 = EDGE_CURVE('',#241579,#241587,#241589,.T.); +#241587 = VERTEX_POINT('',#241588); +#241588 = CARTESIAN_POINT('',(90.524983,-50.352919,1.585)); +#241589 = CIRCLE('',#241590,7.500006711464E-02); +#241590 = AXIS2_PLACEMENT_3D('',#241591,#241592,#241593); +#241591 = CARTESIAN_POINT('',(90.524983067115,-50.27791893288,1.585)); +#241592 = DIRECTION('',(0.,0.,-1.)); +#241593 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#241594 = ORIENTED_EDGE('',*,*,#241595,.T.); +#241595 = EDGE_CURVE('',#241587,#241596,#241598,.T.); +#241596 = VERTEX_POINT('',#241597); +#241597 = CARTESIAN_POINT('',(89.938923,-50.351478,1.585)); +#241598 = LINE('',#241599,#241600); +#241599 = CARTESIAN_POINT('',(90.524983,-50.352919,1.585)); +#241600 = VECTOR('',#241601,1.); +#241601 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#241602 = ORIENTED_EDGE('',*,*,#241603,.T.); +#241603 = EDGE_CURVE('',#241596,#241604,#241606,.T.); +#241604 = VERTEX_POINT('',#241605); +#241605 = CARTESIAN_POINT('',(89.953555,-50.202919,1.585)); +#241606 = CIRCLE('',#241607,7.500006711464E-02); +#241607 = AXIS2_PLACEMENT_3D('',#241608,#241609,#241610); +#241608 = CARTESIAN_POINT('',(89.953554932885,-50.27791906711,1.585)); +#241609 = DIRECTION('',(0.,0.,-1.)); +#241610 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#241611 = ORIENTED_EDGE('',*,*,#241612,.T.); +#241612 = EDGE_CURVE('',#241604,#241613,#241615,.T.); +#241613 = VERTEX_POINT('',#241614); +#241614 = CARTESIAN_POINT('',(90.164269,-50.202919,1.585)); +#241615 = LINE('',#241616,#241617); +#241616 = CARTESIAN_POINT('',(89.953555,-50.202919,1.585)); +#241617 = VECTOR('',#241618,1.); +#241618 = DIRECTION('',(1.,0.,0.)); +#241619 = ORIENTED_EDGE('',*,*,#241620,.T.); +#241620 = EDGE_CURVE('',#241613,#241621,#241623,.T.); +#241621 = VERTEX_POINT('',#241622); +#241622 = CARTESIAN_POINT('',(90.164269,-49.506604,1.585)); +#241623 = LINE('',#241624,#241625); +#241624 = CARTESIAN_POINT('',(90.164269,-50.202919,1.585)); +#241625 = VECTOR('',#241626,1.); +#241626 = DIRECTION('',(0.,1.,0.)); +#241627 = ORIENTED_EDGE('',*,*,#241628,.T.); +#241628 = EDGE_CURVE('',#241621,#241629,#241631,.T.); +#241629 = VERTEX_POINT('',#241630); +#241630 = CARTESIAN_POINT('',(90.088633,-49.579131,1.585)); +#241631 = LINE('',#241632,#241633); +#241632 = CARTESIAN_POINT('',(90.164269,-49.506604,1.585)); +#241633 = VECTOR('',#241634,1.); +#241634 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#241635 = ORIENTED_EDGE('',*,*,#241636,.T.); +#241636 = EDGE_CURVE('',#241629,#241637,#241639,.T.); +#241637 = VERTEX_POINT('',#241638); +#241638 = CARTESIAN_POINT('',(89.973364,-49.63597,1.585)); +#241639 = LINE('',#241640,#241641); +#241640 = CARTESIAN_POINT('',(90.088633,-49.579131,1.585)); +#241641 = VECTOR('',#241642,1.); +#241642 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#241643 = ORIENTED_EDGE('',*,*,#241644,.T.); +#241644 = EDGE_CURVE('',#241637,#241645,#241647,.T.); +#241645 = VERTEX_POINT('',#241646); +#241646 = CARTESIAN_POINT('',(89.920014,-49.496551,1.585)); +#241647 = CIRCLE('',#241648,7.500005272362E-02); +#241648 = AXIS2_PLACEMENT_3D('',#241649,#241650,#241651); +#241649 = CARTESIAN_POINT('',(89.95355455676,-49.56363332972,1.585)); +#241650 = DIRECTION('',(0.,0.,-1.)); +#241651 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#241652 = ORIENTED_EDGE('',*,*,#241653,.T.); +#241653 = EDGE_CURVE('',#241645,#241654,#241656,.T.); +#241654 = VERTEX_POINT('',#241655); +#241655 = CARTESIAN_POINT('',(90.004366,-49.454375,1.585)); +#241656 = LINE('',#241657,#241658); +#241657 = CARTESIAN_POINT('',(89.920014,-49.496551,1.585)); +#241658 = VECTOR('',#241659,1.); +#241659 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#241660 = ORIENTED_EDGE('',*,*,#241661,.T.); +#241661 = EDGE_CURVE('',#241654,#241662,#241664,.T.); +#241662 = VERTEX_POINT('',#241663); +#241663 = CARTESIAN_POINT('',(90.085745,-49.372996,1.585)); +#241664 = LINE('',#241665,#241666); +#241665 = CARTESIAN_POINT('',(90.004366,-49.454375,1.585)); +#241666 = VECTOR('',#241667,1.); +#241667 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#241668 = ORIENTED_EDGE('',*,*,#241669,.T.); +#241669 = EDGE_CURVE('',#241662,#241544,#241670,.T.); +#241670 = LINE('',#241671,#241672); +#241671 = CARTESIAN_POINT('',(90.085745,-49.372996,1.585)); +#241672 = VECTOR('',#241673,1.); +#241673 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#241674 = PLANE('',#241675); +#241675 = AXIS2_PLACEMENT_3D('',#241676,#241677,#241678); +#241676 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241677 = DIRECTION('',(0.,0.,1.)); +#241678 = DIRECTION('',(1.,0.,-0.)); +#241679 = SHELL_BASED_SURFACE_MODEL('',(#241680)); +#241680 = OPEN_SHELL('',(#241681)); +#241681 = ADVANCED_FACE('',(#241682,#241784),#241886,.T.); +#241682 = FACE_BOUND('',#241683,.F.); +#241683 = EDGE_LOOP('',(#241684,#241695,#241703,#241711,#241720,#241728, + #241736,#241745,#241753,#241761,#241770,#241778)); +#241684 = ORIENTED_EDGE('',*,*,#241685,.T.); +#241685 = EDGE_CURVE('',#241686,#241688,#241690,.T.); +#241686 = VERTEX_POINT('',#241687); +#241687 = CARTESIAN_POINT('',(91.008952,-49.26242,1.585)); +#241688 = VERTEX_POINT('',#241689); +#241689 = CARTESIAN_POINT('',(91.38179,-49.267786,1.585)); +#241690 = CIRCLE('',#241691,0.291788488016); +#241691 = AXIS2_PLACEMENT_3D('',#241692,#241693,#241694); +#241692 = CARTESIAN_POINT('',(91.19214086911,-49.48953750256,1.585)); +#241693 = DIRECTION('',(0.,0.,-1.)); +#241694 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#241695 = ORIENTED_EDGE('',*,*,#241696,.T.); +#241696 = EDGE_CURVE('',#241688,#241697,#241699,.T.); +#241697 = VERTEX_POINT('',#241698); +#241698 = CARTESIAN_POINT('',(91.445243,-49.333316,1.585)); +#241699 = LINE('',#241700,#241701); +#241700 = CARTESIAN_POINT('',(91.38179,-49.267786,1.585)); +#241701 = VECTOR('',#241702,1.); +#241702 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#241703 = ORIENTED_EDGE('',*,*,#241704,.T.); +#241704 = EDGE_CURVE('',#241697,#241705,#241707,.T.); +#241705 = VERTEX_POINT('',#241706); +#241706 = CARTESIAN_POINT('',(91.502506,-49.450205,1.585)); +#241707 = LINE('',#241708,#241709); +#241708 = CARTESIAN_POINT('',(91.445243,-49.333316,1.585)); +#241709 = VECTOR('',#241710,1.); +#241710 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#241711 = ORIENTED_EDGE('',*,*,#241712,.T.); +#241712 = EDGE_CURVE('',#241705,#241713,#241715,.T.); +#241713 = VERTEX_POINT('',#241714); +#241714 = CARTESIAN_POINT('',(91.496827,-50.120983,1.585)); +#241715 = CIRCLE('',#241716,0.967158496826); +#241716 = AXIS2_PLACEMENT_3D('',#241717,#241718,#241719); +#241717 = CARTESIAN_POINT('',(90.592559706867,-49.77791417228,1.585)); +#241718 = DIRECTION('',(0.,0.,-1.)); +#241719 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#241720 = ORIENTED_EDGE('',*,*,#241721,.T.); +#241721 = EDGE_CURVE('',#241713,#241722,#241724,.T.); +#241722 = VERTEX_POINT('',#241723); +#241723 = CARTESIAN_POINT('',(91.439877,-50.229963,1.585)); +#241724 = LINE('',#241725,#241726); +#241725 = CARTESIAN_POINT('',(91.496827,-50.120983,1.585)); +#241726 = VECTOR('',#241727,1.); +#241727 = DIRECTION('',(-0.463146784148,-0.886281589752,0.)); +#241728 = ORIENTED_EDGE('',*,*,#241729,.T.); +#241729 = EDGE_CURVE('',#241722,#241730,#241732,.T.); +#241730 = VERTEX_POINT('',#241731); +#241731 = CARTESIAN_POINT('',(91.374347,-50.293417,1.585)); +#241732 = LINE('',#241733,#241734); +#241733 = CARTESIAN_POINT('',(91.439877,-50.229963,1.585)); +#241734 = VECTOR('',#241735,1.); +#241735 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#241736 = ORIENTED_EDGE('',*,*,#241737,.T.); +#241737 = EDGE_CURVE('',#241730,#241738,#241740,.T.); +#241738 = VERTEX_POINT('',#241739); +#241739 = CARTESIAN_POINT('',(91.001508,-50.28805,1.585)); +#241740 = CIRCLE('',#241741,0.290998264264); +#241741 = AXIS2_PLACEMENT_3D('',#241742,#241743,#241744); +#241742 = CARTESIAN_POINT('',(91.191143418158,-50.06732755441,1.585)); +#241743 = DIRECTION('',(-0.,0.,-1.)); +#241744 = DIRECTION('',(0.629569328552,-0.77694430981,-0.)); +#241745 = ORIENTED_EDGE('',*,*,#241746,.T.); +#241746 = EDGE_CURVE('',#241738,#241747,#241749,.T.); +#241747 = VERTEX_POINT('',#241748); +#241748 = CARTESIAN_POINT('',(90.938055,-50.222517,1.585)); +#241749 = LINE('',#241750,#241751); +#241750 = CARTESIAN_POINT('',(91.001508,-50.28805,1.585)); +#241751 = VECTOR('',#241752,1.); +#241752 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#241753 = ORIENTED_EDGE('',*,*,#241754,.T.); +#241754 = EDGE_CURVE('',#241747,#241755,#241757,.T.); +#241755 = VERTEX_POINT('',#241756); +#241756 = CARTESIAN_POINT('',(90.880794,-50.105632,1.585)); +#241757 = LINE('',#241758,#241759); +#241758 = CARTESIAN_POINT('',(90.938055,-50.222517,1.585)); +#241759 = VECTOR('',#241760,1.); +#241760 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#241761 = ORIENTED_EDGE('',*,*,#241762,.T.); +#241762 = EDGE_CURVE('',#241755,#241763,#241765,.T.); +#241763 = VERTEX_POINT('',#241764); +#241764 = CARTESIAN_POINT('',(90.886473,-49.434854,1.585)); +#241765 = CIRCLE('',#241766,0.967158496826); +#241766 = AXIS2_PLACEMENT_3D('',#241767,#241768,#241769); +#241767 = CARTESIAN_POINT('',(91.790740293133,-49.77792282772,1.585)); +#241768 = DIRECTION('',(0.,0.,-1.)); +#241769 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#241770 = ORIENTED_EDGE('',*,*,#241771,.T.); +#241771 = EDGE_CURVE('',#241763,#241772,#241774,.T.); +#241772 = VERTEX_POINT('',#241773); +#241773 = CARTESIAN_POINT('',(90.943422,-49.325873,1.585)); +#241774 = LINE('',#241775,#241776); +#241775 = CARTESIAN_POINT('',(90.886473,-49.434854,1.585)); +#241776 = VECTOR('',#241777,1.); +#241777 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#241778 = ORIENTED_EDGE('',*,*,#241779,.T.); +#241779 = EDGE_CURVE('',#241772,#241686,#241780,.T.); +#241780 = LINE('',#241781,#241782); +#241781 = CARTESIAN_POINT('',(90.943422,-49.325873,1.585)); +#241782 = VECTOR('',#241783,1.); +#241783 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#241784 = FACE_BOUND('',#241785,.F.); +#241785 = EDGE_LOOP('',(#241786,#241797,#241805,#241813,#241822,#241830, + #241838,#241847,#241855,#241863,#241872,#241880)); +#241786 = ORIENTED_EDGE('',*,*,#241787,.T.); +#241787 = EDGE_CURVE('',#241788,#241790,#241792,.T.); +#241788 = VERTEX_POINT('',#241789); +#241789 = CARTESIAN_POINT('',(91.29008,-49.387177,1.585)); +#241790 = VERTEX_POINT('',#241791); +#241791 = CARTESIAN_POINT('',(91.09322,-49.387177,1.585)); +#241792 = CIRCLE('',#241793,0.148516804184); +#241793 = AXIS2_PLACEMENT_3D('',#241794,#241795,#241796); +#241794 = CARTESIAN_POINT('',(91.19165,-49.498392,1.585)); +#241795 = DIRECTION('',(0.,0.,1.)); +#241796 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#241797 = ORIENTED_EDGE('',*,*,#241798,.T.); +#241798 = EDGE_CURVE('',#241790,#241799,#241801,.T.); +#241799 = VERTEX_POINT('',#241800); +#241800 = CARTESIAN_POINT('',(91.062813,-49.417584,1.585)); +#241801 = LINE('',#241802,#241803); +#241802 = CARTESIAN_POINT('',(91.09322,-49.387177,1.585)); +#241803 = VECTOR('',#241804,1.); +#241804 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#241805 = ORIENTED_EDGE('',*,*,#241806,.T.); +#241806 = EDGE_CURVE('',#241799,#241807,#241809,.T.); +#241807 = VERTEX_POINT('',#241808); +#241808 = CARTESIAN_POINT('',(91.024319,-49.494571,1.585)); +#241809 = LINE('',#241810,#241811); +#241810 = CARTESIAN_POINT('',(91.062813,-49.417584,1.585)); +#241811 = VECTOR('',#241812,1.); +#241812 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#241813 = ORIENTED_EDGE('',*,*,#241814,.T.); +#241814 = EDGE_CURVE('',#241807,#241815,#241817,.T.); +#241815 = VERTEX_POINT('',#241816); +#241816 = CARTESIAN_POINT('',(91.024319,-50.061266,1.585)); +#241817 = CIRCLE('',#241818,0.815450468383); +#241818 = AXIS2_PLACEMENT_3D('',#241819,#241820,#241821); +#241819 = CARTESIAN_POINT('',(91.788958562559,-49.7779185,1.585)); +#241820 = DIRECTION('',(0.,0.,1.)); +#241821 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#241822 = ORIENTED_EDGE('',*,*,#241823,.T.); +#241823 = EDGE_CURVE('',#241815,#241824,#241826,.T.); +#241824 = VERTEX_POINT('',#241825); +#241825 = CARTESIAN_POINT('',(91.062813,-50.138253,1.585)); +#241826 = LINE('',#241827,#241828); +#241827 = CARTESIAN_POINT('',(91.024319,-50.061266,1.585)); +#241828 = VECTOR('',#241829,1.); +#241829 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#241830 = ORIENTED_EDGE('',*,*,#241831,.T.); +#241831 = EDGE_CURVE('',#241824,#241832,#241834,.T.); +#241832 = VERTEX_POINT('',#241833); +#241833 = CARTESIAN_POINT('',(91.09322,-50.168661,1.585)); +#241834 = LINE('',#241835,#241836); +#241835 = CARTESIAN_POINT('',(91.062813,-50.138253,1.585)); +#241836 = VECTOR('',#241837,1.); +#241837 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#241838 = ORIENTED_EDGE('',*,*,#241839,.T.); +#241839 = EDGE_CURVE('',#241832,#241840,#241842,.T.); +#241840 = VERTEX_POINT('',#241841); +#241841 = CARTESIAN_POINT('',(91.290079,-50.168661,1.585)); +#241842 = CIRCLE('',#241843,0.14851572397); +#241843 = AXIS2_PLACEMENT_3D('',#241844,#241845,#241846); +#241844 = CARTESIAN_POINT('',(91.1916495,-50.057447,1.585)); +#241845 = DIRECTION('',(0.,0.,1.)); +#241846 = DIRECTION('',(-0.662754739828,-0.748836534121,0.)); +#241847 = ORIENTED_EDGE('',*,*,#241848,.T.); +#241848 = EDGE_CURVE('',#241840,#241849,#241851,.T.); +#241849 = VERTEX_POINT('',#241850); +#241850 = CARTESIAN_POINT('',(91.320486,-50.138253,1.585)); +#241851 = LINE('',#241852,#241853); +#241852 = CARTESIAN_POINT('',(91.290079,-50.168661,1.585)); +#241853 = VECTOR('',#241854,1.); +#241854 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#241855 = ORIENTED_EDGE('',*,*,#241856,.T.); +#241856 = EDGE_CURVE('',#241849,#241857,#241859,.T.); +#241857 = VERTEX_POINT('',#241858); +#241858 = CARTESIAN_POINT('',(91.35898,-50.061266,1.585)); +#241859 = LINE('',#241860,#241861); +#241860 = CARTESIAN_POINT('',(91.320486,-50.138253,1.585)); +#241861 = VECTOR('',#241862,1.); +#241862 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#241863 = ORIENTED_EDGE('',*,*,#241864,.T.); +#241864 = EDGE_CURVE('',#241857,#241865,#241867,.T.); +#241865 = VERTEX_POINT('',#241866); +#241866 = CARTESIAN_POINT('',(91.35898,-49.494571,1.585)); +#241867 = CIRCLE('',#241868,0.815433004022); +#241868 = AXIS2_PLACEMENT_3D('',#241869,#241870,#241871); +#241869 = CARTESIAN_POINT('',(90.59435906235,-49.7779185,1.585)); +#241870 = DIRECTION('',(0.,-0.,1.)); +#241871 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#241872 = ORIENTED_EDGE('',*,*,#241873,.T.); +#241873 = EDGE_CURVE('',#241865,#241874,#241876,.T.); +#241874 = VERTEX_POINT('',#241875); +#241875 = CARTESIAN_POINT('',(91.320487,-49.417584,1.585)); +#241876 = LINE('',#241877,#241878); +#241877 = CARTESIAN_POINT('',(91.35898,-49.494571,1.585)); +#241878 = VECTOR('',#241879,1.); +#241879 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#241880 = ORIENTED_EDGE('',*,*,#241881,.T.); +#241881 = EDGE_CURVE('',#241874,#241788,#241882,.T.); +#241882 = LINE('',#241883,#241884); +#241883 = CARTESIAN_POINT('',(91.320487,-49.417584,1.585)); +#241884 = VECTOR('',#241885,1.); +#241885 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241886 = PLANE('',#241887); +#241887 = AXIS2_PLACEMENT_3D('',#241888,#241889,#241890); +#241888 = CARTESIAN_POINT('',(0.,0.,1.585)); +#241889 = DIRECTION('',(0.,0.,1.)); +#241890 = DIRECTION('',(1.,0.,-0.)); +#241891 = SHELL_BASED_SURFACE_MODEL('',(#241892)); +#241892 = OPEN_SHELL('',(#241893)); +#241893 = ADVANCED_FACE('',(#241894),#242028,.T.); +#241894 = FACE_BOUND('',#241895,.F.); +#241895 = EDGE_LOOP('',(#241896,#241906,#241914,#241923,#241931,#241939, + #241948,#241956,#241965,#241973,#241981,#241989,#241997,#242006, + #242014,#242022)); +#241896 = ORIENTED_EDGE('',*,*,#241897,.T.); +#241897 = EDGE_CURVE('',#241898,#241900,#241902,.T.); +#241898 = VERTEX_POINT('',#241899); +#241899 = CARTESIAN_POINT('',(162.162371,-49.194941,1.585)); +#241900 = VERTEX_POINT('',#241901); +#241901 = CARTESIAN_POINT('',(162.200827,-49.17436,1.585)); +#241902 = LINE('',#241903,#241904); +#241903 = CARTESIAN_POINT('',(162.162371,-49.194941,1.585)); +#241904 = VECTOR('',#241905,1.); +#241905 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#241906 = ORIENTED_EDGE('',*,*,#241907,.T.); +#241907 = EDGE_CURVE('',#241900,#241908,#241910,.T.); +#241908 = VERTEX_POINT('',#241909); +#241909 = CARTESIAN_POINT('',(162.222664,-49.17436,1.585)); +#241910 = LINE('',#241911,#241912); +#241911 = CARTESIAN_POINT('',(162.200827,-49.17436,1.585)); +#241912 = VECTOR('',#241913,1.); +#241913 = DIRECTION('',(1.,0.,0.)); +#241914 = ORIENTED_EDGE('',*,*,#241915,.T.); +#241915 = EDGE_CURVE('',#241908,#241916,#241918,.T.); +#241916 = VERTEX_POINT('',#241917); +#241917 = CARTESIAN_POINT('',(162.290459,-49.247919,1.585)); +#241918 = CIRCLE('',#241919,7.21689809423E-02); +#241919 = AXIS2_PLACEMENT_3D('',#241920,#241921,#241922); +#241920 = CARTESIAN_POINT('',(162.21830606389,-49.24639728342,1.585)); +#241921 = DIRECTION('',(0.,0.,-1.)); +#241922 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#241923 = ORIENTED_EDGE('',*,*,#241924,.T.); +#241924 = EDGE_CURVE('',#241916,#241925,#241927,.T.); +#241925 = VERTEX_POINT('',#241926); +#241926 = CARTESIAN_POINT('',(162.290459,-50.172919,1.585)); +#241927 = LINE('',#241928,#241929); +#241928 = CARTESIAN_POINT('',(162.290459,-49.247919,1.585)); +#241929 = VECTOR('',#241930,1.); +#241930 = DIRECTION('',(0.,-1.,0.)); +#241931 = ORIENTED_EDGE('',*,*,#241932,.T.); +#241932 = EDGE_CURVE('',#241925,#241933,#241935,.T.); +#241933 = VERTEX_POINT('',#241934); +#241934 = CARTESIAN_POINT('',(162.515805,-50.17436,1.585)); +#241935 = LINE('',#241936,#241937); +#241936 = CARTESIAN_POINT('',(162.290459,-50.172919,1.585)); +#241937 = VECTOR('',#241938,1.); +#241938 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#241939 = ORIENTED_EDGE('',*,*,#241940,.T.); +#241940 = EDGE_CURVE('',#241933,#241941,#241943,.T.); +#241941 = VERTEX_POINT('',#241942); +#241942 = CARTESIAN_POINT('',(162.501173,-50.322919,1.585)); +#241943 = CIRCLE('',#241944,7.500006711464E-02); +#241944 = AXIS2_PLACEMENT_3D('',#241945,#241946,#241947); +#241945 = CARTESIAN_POINT('',(162.50117306711,-50.24791893288,1.585)); +#241946 = DIRECTION('',(0.,0.,-1.)); +#241947 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#241948 = ORIENTED_EDGE('',*,*,#241949,.T.); +#241949 = EDGE_CURVE('',#241941,#241950,#241952,.T.); +#241950 = VERTEX_POINT('',#241951); +#241951 = CARTESIAN_POINT('',(161.915113,-50.321478,1.585)); +#241952 = LINE('',#241953,#241954); +#241953 = CARTESIAN_POINT('',(162.501173,-50.322919,1.585)); +#241954 = VECTOR('',#241955,1.); +#241955 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#241956 = ORIENTED_EDGE('',*,*,#241957,.T.); +#241957 = EDGE_CURVE('',#241950,#241958,#241960,.T.); +#241958 = VERTEX_POINT('',#241959); +#241959 = CARTESIAN_POINT('',(161.929745,-50.172919,1.585)); +#241960 = CIRCLE('',#241961,7.500006711464E-02); +#241961 = AXIS2_PLACEMENT_3D('',#241962,#241963,#241964); +#241962 = CARTESIAN_POINT('',(161.92974493288,-50.24791906711,1.585)); +#241963 = DIRECTION('',(0.,0.,-1.)); +#241964 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#241965 = ORIENTED_EDGE('',*,*,#241966,.T.); +#241966 = EDGE_CURVE('',#241958,#241967,#241969,.T.); +#241967 = VERTEX_POINT('',#241968); +#241968 = CARTESIAN_POINT('',(162.140459,-50.172919,1.585)); +#241969 = LINE('',#241970,#241971); +#241970 = CARTESIAN_POINT('',(161.929745,-50.172919,1.585)); +#241971 = VECTOR('',#241972,1.); +#241972 = DIRECTION('',(1.,0.,0.)); +#241973 = ORIENTED_EDGE('',*,*,#241974,.T.); +#241974 = EDGE_CURVE('',#241967,#241975,#241977,.T.); +#241975 = VERTEX_POINT('',#241976); +#241976 = CARTESIAN_POINT('',(162.140459,-49.476604,1.585)); +#241977 = LINE('',#241978,#241979); +#241978 = CARTESIAN_POINT('',(162.140459,-50.172919,1.585)); +#241979 = VECTOR('',#241980,1.); +#241980 = DIRECTION('',(0.,1.,0.)); +#241981 = ORIENTED_EDGE('',*,*,#241982,.T.); +#241982 = EDGE_CURVE('',#241975,#241983,#241985,.T.); +#241983 = VERTEX_POINT('',#241984); +#241984 = CARTESIAN_POINT('',(162.064823,-49.549131,1.585)); +#241985 = LINE('',#241986,#241987); +#241986 = CARTESIAN_POINT('',(162.140459,-49.476604,1.585)); +#241987 = VECTOR('',#241988,1.); +#241988 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#241989 = ORIENTED_EDGE('',*,*,#241990,.T.); +#241990 = EDGE_CURVE('',#241983,#241991,#241993,.T.); +#241991 = VERTEX_POINT('',#241992); +#241992 = CARTESIAN_POINT('',(161.949554,-49.60597,1.585)); +#241993 = LINE('',#241994,#241995); +#241994 = CARTESIAN_POINT('',(162.064823,-49.549131,1.585)); +#241995 = VECTOR('',#241996,1.); +#241996 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#241997 = ORIENTED_EDGE('',*,*,#241998,.T.); +#241998 = EDGE_CURVE('',#241991,#241999,#242001,.T.); +#241999 = VERTEX_POINT('',#242000); +#242000 = CARTESIAN_POINT('',(161.896204,-49.466551,1.585)); +#242001 = CIRCLE('',#242002,7.500005272362E-02); +#242002 = AXIS2_PLACEMENT_3D('',#242003,#242004,#242005); +#242003 = CARTESIAN_POINT('',(161.92974455676,-49.53363332972,1.585)); +#242004 = DIRECTION('',(0.,0.,-1.)); +#242005 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#242006 = ORIENTED_EDGE('',*,*,#242007,.T.); +#242007 = EDGE_CURVE('',#241999,#242008,#242010,.T.); +#242008 = VERTEX_POINT('',#242009); +#242009 = CARTESIAN_POINT('',(161.980556,-49.424375,1.585)); +#242010 = LINE('',#242011,#242012); +#242011 = CARTESIAN_POINT('',(161.896204,-49.466551,1.585)); +#242012 = VECTOR('',#242013,1.); +#242013 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#242014 = ORIENTED_EDGE('',*,*,#242015,.T.); +#242015 = EDGE_CURVE('',#242008,#242016,#242018,.T.); +#242016 = VERTEX_POINT('',#242017); +#242017 = CARTESIAN_POINT('',(162.061935,-49.342996,1.585)); +#242018 = LINE('',#242019,#242020); +#242019 = CARTESIAN_POINT('',(161.980556,-49.424375,1.585)); +#242020 = VECTOR('',#242021,1.); +#242021 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242022 = ORIENTED_EDGE('',*,*,#242023,.T.); +#242023 = EDGE_CURVE('',#242016,#241898,#242024,.T.); +#242024 = LINE('',#242025,#242026); +#242025 = CARTESIAN_POINT('',(162.061935,-49.342996,1.585)); +#242026 = VECTOR('',#242027,1.); +#242027 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#242028 = PLANE('',#242029); +#242029 = AXIS2_PLACEMENT_3D('',#242030,#242031,#242032); +#242030 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242031 = DIRECTION('',(0.,0.,1.)); +#242032 = DIRECTION('',(1.,0.,-0.)); +#242033 = SHELL_BASED_SURFACE_MODEL('',(#242034)); +#242034 = OPEN_SHELL('',(#242035)); +#242035 = ADVANCED_FACE('',(#242036),#242170,.T.); +#242036 = FACE_BOUND('',#242037,.F.); +#242037 = EDGE_LOOP('',(#242038,#242048,#242056,#242065,#242073,#242081, + #242090,#242098,#242107,#242115,#242123,#242131,#242139,#242148, + #242156,#242164)); +#242038 = ORIENTED_EDGE('',*,*,#242039,.T.); +#242039 = EDGE_CURVE('',#242040,#242042,#242044,.T.); +#242040 = VERTEX_POINT('',#242041); +#242041 = CARTESIAN_POINT('',(163.114752,-49.194941,1.585)); +#242042 = VERTEX_POINT('',#242043); +#242043 = CARTESIAN_POINT('',(163.153208,-49.17436,1.585)); +#242044 = LINE('',#242045,#242046); +#242045 = CARTESIAN_POINT('',(163.114752,-49.194941,1.585)); +#242046 = VECTOR('',#242047,1.); +#242047 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#242048 = ORIENTED_EDGE('',*,*,#242049,.T.); +#242049 = EDGE_CURVE('',#242042,#242050,#242052,.T.); +#242050 = VERTEX_POINT('',#242051); +#242051 = CARTESIAN_POINT('',(163.175045,-49.17436,1.585)); +#242052 = LINE('',#242053,#242054); +#242053 = CARTESIAN_POINT('',(163.153208,-49.17436,1.585)); +#242054 = VECTOR('',#242055,1.); +#242055 = DIRECTION('',(1.,0.,0.)); +#242056 = ORIENTED_EDGE('',*,*,#242057,.T.); +#242057 = EDGE_CURVE('',#242050,#242058,#242060,.T.); +#242058 = VERTEX_POINT('',#242059); +#242059 = CARTESIAN_POINT('',(163.24284,-49.247919,1.585)); +#242060 = CIRCLE('',#242061,7.21689809423E-02); +#242061 = AXIS2_PLACEMENT_3D('',#242062,#242063,#242064); +#242062 = CARTESIAN_POINT('',(163.17068706389,-49.24639728342,1.585)); +#242063 = DIRECTION('',(0.,0.,-1.)); +#242064 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#242065 = ORIENTED_EDGE('',*,*,#242066,.T.); +#242066 = EDGE_CURVE('',#242058,#242067,#242069,.T.); +#242067 = VERTEX_POINT('',#242068); +#242068 = CARTESIAN_POINT('',(163.24284,-50.172919,1.585)); +#242069 = LINE('',#242070,#242071); +#242070 = CARTESIAN_POINT('',(163.24284,-49.247919,1.585)); +#242071 = VECTOR('',#242072,1.); +#242072 = DIRECTION('',(0.,-1.,0.)); +#242073 = ORIENTED_EDGE('',*,*,#242074,.T.); +#242074 = EDGE_CURVE('',#242067,#242075,#242077,.T.); +#242075 = VERTEX_POINT('',#242076); +#242076 = CARTESIAN_POINT('',(163.468186,-50.17436,1.585)); +#242077 = LINE('',#242078,#242079); +#242078 = CARTESIAN_POINT('',(163.24284,-50.172919,1.585)); +#242079 = VECTOR('',#242080,1.); +#242080 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#242081 = ORIENTED_EDGE('',*,*,#242082,.T.); +#242082 = EDGE_CURVE('',#242075,#242083,#242085,.T.); +#242083 = VERTEX_POINT('',#242084); +#242084 = CARTESIAN_POINT('',(163.453554,-50.322919,1.585)); +#242085 = CIRCLE('',#242086,7.500006711464E-02); +#242086 = AXIS2_PLACEMENT_3D('',#242087,#242088,#242089); +#242087 = CARTESIAN_POINT('',(163.45355406711,-50.24791893288,1.585)); +#242088 = DIRECTION('',(0.,0.,-1.)); +#242089 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#242090 = ORIENTED_EDGE('',*,*,#242091,.T.); +#242091 = EDGE_CURVE('',#242083,#242092,#242094,.T.); +#242092 = VERTEX_POINT('',#242093); +#242093 = CARTESIAN_POINT('',(162.867494,-50.321478,1.585)); +#242094 = LINE('',#242095,#242096); +#242095 = CARTESIAN_POINT('',(163.453554,-50.322919,1.585)); +#242096 = VECTOR('',#242097,1.); +#242097 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#242098 = ORIENTED_EDGE('',*,*,#242099,.T.); +#242099 = EDGE_CURVE('',#242092,#242100,#242102,.T.); +#242100 = VERTEX_POINT('',#242101); +#242101 = CARTESIAN_POINT('',(162.882126,-50.172919,1.585)); +#242102 = CIRCLE('',#242103,7.500006711464E-02); +#242103 = AXIS2_PLACEMENT_3D('',#242104,#242105,#242106); +#242104 = CARTESIAN_POINT('',(162.88212593288,-50.24791906711,1.585)); +#242105 = DIRECTION('',(0.,0.,-1.)); +#242106 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#242107 = ORIENTED_EDGE('',*,*,#242108,.T.); +#242108 = EDGE_CURVE('',#242100,#242109,#242111,.T.); +#242109 = VERTEX_POINT('',#242110); +#242110 = CARTESIAN_POINT('',(163.09284,-50.172919,1.585)); +#242111 = LINE('',#242112,#242113); +#242112 = CARTESIAN_POINT('',(162.882126,-50.172919,1.585)); +#242113 = VECTOR('',#242114,1.); +#242114 = DIRECTION('',(1.,0.,0.)); +#242115 = ORIENTED_EDGE('',*,*,#242116,.T.); +#242116 = EDGE_CURVE('',#242109,#242117,#242119,.T.); +#242117 = VERTEX_POINT('',#242118); +#242118 = CARTESIAN_POINT('',(163.09284,-49.476604,1.585)); +#242119 = LINE('',#242120,#242121); +#242120 = CARTESIAN_POINT('',(163.09284,-50.172919,1.585)); +#242121 = VECTOR('',#242122,1.); +#242122 = DIRECTION('',(0.,1.,0.)); +#242123 = ORIENTED_EDGE('',*,*,#242124,.T.); +#242124 = EDGE_CURVE('',#242117,#242125,#242127,.T.); +#242125 = VERTEX_POINT('',#242126); +#242126 = CARTESIAN_POINT('',(163.017204,-49.549131,1.585)); +#242127 = LINE('',#242128,#242129); +#242128 = CARTESIAN_POINT('',(163.09284,-49.476604,1.585)); +#242129 = VECTOR('',#242130,1.); +#242130 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#242131 = ORIENTED_EDGE('',*,*,#242132,.T.); +#242132 = EDGE_CURVE('',#242125,#242133,#242135,.T.); +#242133 = VERTEX_POINT('',#242134); +#242134 = CARTESIAN_POINT('',(162.901935,-49.60597,1.585)); +#242135 = LINE('',#242136,#242137); +#242136 = CARTESIAN_POINT('',(163.017204,-49.549131,1.585)); +#242137 = VECTOR('',#242138,1.); +#242138 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#242139 = ORIENTED_EDGE('',*,*,#242140,.T.); +#242140 = EDGE_CURVE('',#242133,#242141,#242143,.T.); +#242141 = VERTEX_POINT('',#242142); +#242142 = CARTESIAN_POINT('',(162.848585,-49.466551,1.585)); +#242143 = CIRCLE('',#242144,7.500005272362E-02); +#242144 = AXIS2_PLACEMENT_3D('',#242145,#242146,#242147); +#242145 = CARTESIAN_POINT('',(162.88212555676,-49.53363332972,1.585)); +#242146 = DIRECTION('',(0.,0.,-1.)); +#242147 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#242148 = ORIENTED_EDGE('',*,*,#242149,.T.); +#242149 = EDGE_CURVE('',#242141,#242150,#242152,.T.); +#242150 = VERTEX_POINT('',#242151); +#242151 = CARTESIAN_POINT('',(162.932937,-49.424375,1.585)); +#242152 = LINE('',#242153,#242154); +#242153 = CARTESIAN_POINT('',(162.848585,-49.466551,1.585)); +#242154 = VECTOR('',#242155,1.); +#242155 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#242156 = ORIENTED_EDGE('',*,*,#242157,.T.); +#242157 = EDGE_CURVE('',#242150,#242158,#242160,.T.); +#242158 = VERTEX_POINT('',#242159); +#242159 = CARTESIAN_POINT('',(163.014316,-49.342996,1.585)); +#242160 = LINE('',#242161,#242162); +#242161 = CARTESIAN_POINT('',(162.932937,-49.424375,1.585)); +#242162 = VECTOR('',#242163,1.); +#242163 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242164 = ORIENTED_EDGE('',*,*,#242165,.T.); +#242165 = EDGE_CURVE('',#242158,#242040,#242166,.T.); +#242166 = LINE('',#242167,#242168); +#242167 = CARTESIAN_POINT('',(163.014316,-49.342996,1.585)); +#242168 = VECTOR('',#242169,1.); +#242169 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#242170 = PLANE('',#242171); +#242171 = AXIS2_PLACEMENT_3D('',#242172,#242173,#242174); +#242172 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242173 = DIRECTION('',(0.,0.,1.)); +#242174 = DIRECTION('',(1.,0.,-0.)); +#242175 = SHELL_BASED_SURFACE_MODEL('',(#242176)); +#242176 = OPEN_SHELL('',(#242177)); +#242177 = ADVANCED_FACE('',(#242178),#242363,.T.); +#242178 = FACE_BOUND('',#242179,.F.); +#242179 = EDGE_LOOP('',(#242180,#242191,#242199,#242208,#242216,#242225, + #242233,#242242,#242250,#242258,#242266,#242275,#242283,#242292, + #242300,#242309,#242317,#242325,#242333,#242341,#242349,#242357)); +#242180 = ORIENTED_EDGE('',*,*,#242181,.T.); +#242181 = EDGE_CURVE('',#242182,#242184,#242186,.T.); +#242182 = VERTEX_POINT('',#242183); +#242183 = CARTESIAN_POINT('',(161.083078,-49.230381,1.585)); +#242184 = VERTEX_POINT('',#242185); +#242185 = CARTESIAN_POINT('',(161.542841,-49.233178,1.585)); +#242186 = CIRCLE('',#242187,0.460785175821); +#242187 = AXIS2_PLACEMENT_3D('',#242188,#242189,#242190); +#242188 = CARTESIAN_POINT('',(161.31053010897,-49.63111597024,1.585)); +#242189 = DIRECTION('',(0.,0.,-1.)); +#242190 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#242191 = ORIENTED_EDGE('',*,*,#242192,.T.); +#242192 = EDGE_CURVE('',#242184,#242193,#242195,.T.); +#242193 = VERTEX_POINT('',#242194); +#242194 = CARTESIAN_POINT('',(161.611152,-49.301489,1.585)); +#242195 = LINE('',#242196,#242197); +#242196 = CARTESIAN_POINT('',(161.542841,-49.233178,1.585)); +#242197 = VECTOR('',#242198,1.); +#242198 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242199 = ORIENTED_EDGE('',*,*,#242200,.T.); +#242200 = EDGE_CURVE('',#242193,#242201,#242203,.T.); +#242201 = VERTEX_POINT('',#242202); +#242202 = CARTESIAN_POINT('',(161.495759,-49.39619,1.585)); +#242203 = CIRCLE('',#242204,7.500003178657E-02); +#242204 = AXIS2_PLACEMENT_3D('',#242205,#242206,#242207); +#242205 = CARTESIAN_POINT('',(161.54879156212,-49.3431565,1.585)); +#242206 = DIRECTION('',(0.,0.,-1.)); +#242207 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#242208 = ORIENTED_EDGE('',*,*,#242209,.T.); +#242209 = EDGE_CURVE('',#242201,#242210,#242212,.T.); +#242210 = VERTEX_POINT('',#242211); +#242211 = CARTESIAN_POINT('',(161.460659,-49.36109,1.585)); +#242212 = LINE('',#242213,#242214); +#242213 = CARTESIAN_POINT('',(161.495759,-49.39619,1.585)); +#242214 = VECTOR('',#242215,1.); +#242215 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242216 = ORIENTED_EDGE('',*,*,#242217,.T.); +#242217 = EDGE_CURVE('',#242210,#242218,#242220,.T.); +#242218 = VERTEX_POINT('',#242219); +#242219 = CARTESIAN_POINT('',(161.160735,-49.36109,1.585)); +#242220 = CIRCLE('',#242221,0.299308637371); +#242221 = AXIS2_PLACEMENT_3D('',#242222,#242223,#242224); +#242222 = CARTESIAN_POINT('',(161.310697,-49.620121,1.585)); +#242223 = DIRECTION('',(0.,0.,1.)); +#242224 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#242225 = ORIENTED_EDGE('',*,*,#242226,.T.); +#242226 = EDGE_CURVE('',#242218,#242227,#242229,.T.); +#242227 = VERTEX_POINT('',#242228); +#242228 = CARTESIAN_POINT('',(161.086622,-49.435203,1.585)); +#242229 = LINE('',#242230,#242231); +#242230 = CARTESIAN_POINT('',(161.160735,-49.36109,1.585)); +#242231 = VECTOR('',#242232,1.); +#242232 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#242233 = ORIENTED_EDGE('',*,*,#242234,.T.); +#242234 = EDGE_CURVE('',#242227,#242235,#242237,.T.); +#242235 = VERTEX_POINT('',#242236); +#242236 = CARTESIAN_POINT('',(161.004745,-49.810113,1.585)); +#242237 = CIRCLE('',#242238,0.611712714362); +#242238 = AXIS2_PLACEMENT_3D('',#242239,#242240,#242241); +#242239 = CARTESIAN_POINT('',(161.61315027521,-49.7465876822,1.585)); +#242240 = DIRECTION('',(0.,0.,1.)); +#242241 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#242242 = ORIENTED_EDGE('',*,*,#242243,.T.); +#242243 = EDGE_CURVE('',#242235,#242244,#242246,.T.); +#242244 = VERTEX_POINT('',#242245); +#242245 = CARTESIAN_POINT('',(161.048128,-49.983647,1.585)); +#242246 = LINE('',#242247,#242248); +#242247 = CARTESIAN_POINT('',(161.004745,-49.810113,1.585)); +#242248 = VECTOR('',#242249,1.); +#242249 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#242250 = ORIENTED_EDGE('',*,*,#242251,.T.); +#242251 = EDGE_CURVE('',#242244,#242252,#242254,.T.); +#242252 = VERTEX_POINT('',#242253); +#242253 = CARTESIAN_POINT('',(161.086622,-50.060634,1.585)); +#242254 = LINE('',#242255,#242256); +#242255 = CARTESIAN_POINT('',(161.048128,-49.983647,1.585)); +#242256 = VECTOR('',#242257,1.); +#242257 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#242258 = ORIENTED_EDGE('',*,*,#242259,.T.); +#242259 = EDGE_CURVE('',#242252,#242260,#242262,.T.); +#242260 = VERTEX_POINT('',#242261); +#242261 = CARTESIAN_POINT('',(161.160735,-50.134748,1.585)); +#242262 = LINE('',#242263,#242264); +#242263 = CARTESIAN_POINT('',(161.086622,-50.060634,1.585)); +#242264 = VECTOR('',#242265,1.); +#242265 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#242266 = ORIENTED_EDGE('',*,*,#242267,.T.); +#242267 = EDGE_CURVE('',#242260,#242268,#242270,.T.); +#242268 = VERTEX_POINT('',#242269); +#242269 = CARTESIAN_POINT('',(161.460659,-50.134747,1.585)); +#242270 = CIRCLE('',#242271,0.299305962385); +#242271 = AXIS2_PLACEMENT_3D('',#242272,#242273,#242274); +#242272 = CARTESIAN_POINT('',(161.31069613635,-49.87571959093,1.585)); +#242273 = DIRECTION('',(0.,0.,1.)); +#242274 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#242275 = ORIENTED_EDGE('',*,*,#242276,.T.); +#242276 = EDGE_CURVE('',#242268,#242277,#242279,.T.); +#242277 = VERTEX_POINT('',#242278); +#242278 = CARTESIAN_POINT('',(161.507124,-50.09032,1.585)); +#242279 = LINE('',#242280,#242281); +#242280 = CARTESIAN_POINT('',(161.460659,-50.134747,1.585)); +#242281 = VECTOR('',#242282,1.); +#242282 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#242283 = ORIENTED_EDGE('',*,*,#242284,.T.); +#242284 = EDGE_CURVE('',#242277,#242285,#242287,.T.); +#242285 = VERTEX_POINT('',#242286); +#242286 = CARTESIAN_POINT('',(161.601825,-50.205713,1.585)); +#242287 = CIRCLE('',#242288,7.499993690112E-02); +#242288 = AXIS2_PLACEMENT_3D('',#242289,#242290,#242291); +#242289 = CARTESIAN_POINT('',(161.5487922483,-50.15267982374,1.585)); +#242290 = DIRECTION('',(0.,0.,-1.)); +#242291 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#242292 = ORIENTED_EDGE('',*,*,#242293,.T.); +#242293 = EDGE_CURVE('',#242285,#242294,#242296,.T.); +#242294 = VERTEX_POINT('',#242295); +#242295 = CARTESIAN_POINT('',(161.538315,-50.265457,1.585)); +#242296 = LINE('',#242297,#242298); +#242297 = CARTESIAN_POINT('',(161.601825,-50.205713,1.585)); +#242298 = VECTOR('',#242299,1.); +#242299 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#242300 = ORIENTED_EDGE('',*,*,#242301,.T.); +#242301 = EDGE_CURVE('',#242294,#242302,#242304,.T.); +#242302 = VERTEX_POINT('',#242303); +#242303 = CARTESIAN_POINT('',(161.078553,-50.262661,1.585)); +#242304 = CIRCLE('',#242305,0.461067828848); +#242305 = AXIS2_PLACEMENT_3D('',#242306,#242307,#242308); +#242306 = CARTESIAN_POINT('',(161.31086451268,-49.86439613352,1.585)); +#242307 = DIRECTION('',(-0.,0.,-1.)); +#242308 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#242309 = ORIENTED_EDGE('',*,*,#242310,.T.); +#242310 = EDGE_CURVE('',#242302,#242311,#242313,.T.); +#242311 = VERTEX_POINT('',#242312); +#242312 = CARTESIAN_POINT('',(160.961864,-50.144898,1.585)); +#242313 = LINE('',#242314,#242315); +#242314 = CARTESIAN_POINT('',(161.078553,-50.262661,1.585)); +#242315 = VECTOR('',#242316,1.); +#242316 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#242317 = ORIENTED_EDGE('',*,*,#242318,.T.); +#242318 = EDGE_CURVE('',#242311,#242319,#242321,.T.); +#242319 = VERTEX_POINT('',#242320); +#242320 = CARTESIAN_POINT('',(160.904603,-50.028013,1.585)); +#242321 = LINE('',#242322,#242323); +#242322 = CARTESIAN_POINT('',(160.961864,-50.144898,1.585)); +#242323 = VECTOR('',#242324,1.); +#242324 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#242325 = ORIENTED_EDGE('',*,*,#242326,.T.); +#242326 = EDGE_CURVE('',#242319,#242327,#242329,.T.); +#242327 = VERTEX_POINT('',#242328); +#242328 = CARTESIAN_POINT('',(160.854745,-49.819347,1.585)); +#242329 = LINE('',#242330,#242331); +#242330 = CARTESIAN_POINT('',(160.904603,-50.028013,1.585)); +#242331 = VECTOR('',#242332,1.); +#242332 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#242333 = ORIENTED_EDGE('',*,*,#242334,.T.); +#242334 = EDGE_CURVE('',#242327,#242335,#242337,.T.); +#242335 = VERTEX_POINT('',#242336); +#242336 = CARTESIAN_POINT('',(160.856984,-49.6583,1.585)); +#242337 = LINE('',#242338,#242339); +#242338 = CARTESIAN_POINT('',(160.854745,-49.819347,1.585)); +#242339 = VECTOR('',#242340,1.); +#242340 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#242341 = ORIENTED_EDGE('',*,*,#242342,.T.); +#242342 = EDGE_CURVE('',#242335,#242343,#242345,.T.); +#242343 = VERTEX_POINT('',#242344); +#242344 = CARTESIAN_POINT('',(160.910282,-49.452473,1.585)); +#242345 = LINE('',#242346,#242347); +#242346 = CARTESIAN_POINT('',(160.856984,-49.6583,1.585)); +#242347 = VECTOR('',#242348,1.); +#242348 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#242349 = ORIENTED_EDGE('',*,*,#242350,.T.); +#242350 = EDGE_CURVE('',#242343,#242351,#242353,.T.); +#242351 = VERTEX_POINT('',#242352); +#242352 = CARTESIAN_POINT('',(160.967231,-49.343492,1.585)); +#242353 = LINE('',#242354,#242355); +#242354 = CARTESIAN_POINT('',(160.910282,-49.452473,1.585)); +#242355 = VECTOR('',#242356,1.); +#242356 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#242357 = ORIENTED_EDGE('',*,*,#242358,.T.); +#242358 = EDGE_CURVE('',#242351,#242182,#242359,.T.); +#242359 = LINE('',#242360,#242361); +#242360 = CARTESIAN_POINT('',(160.967231,-49.343492,1.585)); +#242361 = VECTOR('',#242362,1.); +#242362 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#242363 = PLANE('',#242364); +#242364 = AXIS2_PLACEMENT_3D('',#242365,#242366,#242367); +#242365 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242366 = DIRECTION('',(0.,0.,1.)); +#242367 = DIRECTION('',(1.,0.,-0.)); +#242368 = SHELL_BASED_SURFACE_MODEL('',(#242369)); +#242369 = OPEN_SHELL('',(#242370)); +#242370 = ADVANCED_FACE('',(#242371),#242457,.T.); +#242371 = FACE_BOUND('',#242372,.F.); +#242372 = EDGE_LOOP('',(#242373,#242384,#242392,#242401,#242409,#242418, + #242426,#242434,#242442,#242451)); +#242373 = ORIENTED_EDGE('',*,*,#242374,.T.); +#242374 = EDGE_CURVE('',#242375,#242377,#242379,.T.); +#242375 = VERTEX_POINT('',#242376); +#242376 = CARTESIAN_POINT('',(167.09665,-50.1681,1.585)); +#242377 = VERTEX_POINT('',#242378); +#242378 = CARTESIAN_POINT('',(167.15665,-50.1081,1.585)); +#242379 = CIRCLE('',#242380,5.999932016256E-02); +#242380 = AXIS2_PLACEMENT_3D('',#242381,#242382,#242383); +#242381 = CARTESIAN_POINT('',(167.15664932015,-50.16809932015,1.585)); +#242382 = DIRECTION('',(0.,0.,-1.)); +#242383 = DIRECTION('',(-0.999999999936,-1.133081683198E-05,-0.)); +#242384 = ORIENTED_EDGE('',*,*,#242385,.T.); +#242385 = EDGE_CURVE('',#242377,#242386,#242388,.T.); +#242386 = VERTEX_POINT('',#242387); +#242387 = CARTESIAN_POINT('',(171.27665,-50.1081,1.585)); +#242388 = LINE('',#242389,#242390); +#242389 = CARTESIAN_POINT('',(167.15665,-50.1081,1.585)); +#242390 = VECTOR('',#242391,1.); +#242391 = DIRECTION('',(1.,0.,0.)); +#242392 = ORIENTED_EDGE('',*,*,#242393,.T.); +#242393 = EDGE_CURVE('',#242386,#242394,#242396,.T.); +#242394 = VERTEX_POINT('',#242395); +#242395 = CARTESIAN_POINT('',(171.33665,-50.1681,1.585)); +#242396 = CIRCLE('',#242397,5.999932016259E-02); +#242397 = AXIS2_PLACEMENT_3D('',#242398,#242399,#242400); +#242398 = CARTESIAN_POINT('',(171.27665067984,-50.16809932015,1.585)); +#242399 = DIRECTION('',(0.,0.,-1.)); +#242400 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#242401 = ORIENTED_EDGE('',*,*,#242402,.T.); +#242402 = EDGE_CURVE('',#242394,#242403,#242405,.T.); +#242403 = VERTEX_POINT('',#242404); +#242404 = CARTESIAN_POINT('',(171.33665,-50.2631,1.585)); +#242405 = LINE('',#242406,#242407); +#242406 = CARTESIAN_POINT('',(171.33665,-50.1681,1.585)); +#242407 = VECTOR('',#242408,1.); +#242408 = DIRECTION('',(0.,-1.,0.)); +#242409 = ORIENTED_EDGE('',*,*,#242410,.T.); +#242410 = EDGE_CURVE('',#242403,#242411,#242413,.T.); +#242411 = VERTEX_POINT('',#242412); +#242412 = CARTESIAN_POINT('',(171.221217,-50.286061,1.585)); +#242413 = CIRCLE('',#242414,6.000007318647E-02); +#242414 = AXIS2_PLACEMENT_3D('',#242415,#242416,#242417); +#242415 = CARTESIAN_POINT('',(171.27664992681,-50.26310017668,1.585)); +#242416 = DIRECTION('',(0.,0.,-1.)); +#242417 = DIRECTION('',(0.999999999996,2.944769485282E-06,0.)); +#242418 = ORIENTED_EDGE('',*,*,#242419,.T.); +#242419 = EDGE_CURVE('',#242411,#242420,#242422,.T.); +#242420 = VERTEX_POINT('',#242421); +#242421 = CARTESIAN_POINT('',(171.21665,-50.2281,1.585)); +#242422 = LINE('',#242423,#242424); +#242423 = CARTESIAN_POINT('',(171.221217,-50.286061,1.585)); +#242424 = VECTOR('',#242425,1.); +#242425 = DIRECTION('',(-7.855089539736E-02,0.99691010469,0.)); +#242426 = ORIENTED_EDGE('',*,*,#242427,.T.); +#242427 = EDGE_CURVE('',#242420,#242428,#242430,.T.); +#242428 = VERTEX_POINT('',#242429); +#242429 = CARTESIAN_POINT('',(167.21665,-50.2281,1.585)); +#242430 = LINE('',#242431,#242432); +#242431 = CARTESIAN_POINT('',(171.21665,-50.2281,1.585)); +#242432 = VECTOR('',#242433,1.); +#242433 = DIRECTION('',(-1.,0.,0.)); +#242434 = ORIENTED_EDGE('',*,*,#242435,.T.); +#242435 = EDGE_CURVE('',#242428,#242436,#242438,.T.); +#242436 = VERTEX_POINT('',#242437); +#242437 = CARTESIAN_POINT('',(167.212083,-50.286061,1.585)); +#242438 = LINE('',#242439,#242440); +#242439 = CARTESIAN_POINT('',(167.21665,-50.2281,1.585)); +#242440 = VECTOR('',#242441,1.); +#242441 = DIRECTION('',(-7.855089539687E-02,-0.99691010469,0.)); +#242442 = ORIENTED_EDGE('',*,*,#242443,.T.); +#242443 = EDGE_CURVE('',#242436,#242444,#242446,.T.); +#242444 = VERTEX_POINT('',#242445); +#242445 = CARTESIAN_POINT('',(167.09665,-50.2631,1.585)); +#242446 = CIRCLE('',#242447,6.000007318647E-02); +#242447 = AXIS2_PLACEMENT_3D('',#242448,#242449,#242450); +#242448 = CARTESIAN_POINT('',(167.15665007318,-50.26310017668,1.585)); +#242449 = DIRECTION('',(-0.,0.,-1.)); +#242450 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#242451 = ORIENTED_EDGE('',*,*,#242452,.T.); +#242452 = EDGE_CURVE('',#242444,#242375,#242453,.T.); +#242453 = LINE('',#242454,#242455); +#242454 = CARTESIAN_POINT('',(167.09665,-50.2631,1.585)); +#242455 = VECTOR('',#242456,1.); +#242456 = DIRECTION('',(0.,1.,0.)); +#242457 = PLANE('',#242458); +#242458 = AXIS2_PLACEMENT_3D('',#242459,#242460,#242461); +#242459 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242460 = DIRECTION('',(0.,0.,1.)); +#242461 = DIRECTION('',(1.,0.,-0.)); +#242462 = SHELL_BASED_SURFACE_MODEL('',(#242463)); +#242463 = OPEN_SHELL('',(#242464)); +#242464 = ADVANCED_FACE('',(#242465),#242542,.T.); +#242465 = FACE_BOUND('',#242466,.F.); +#242466 = EDGE_LOOP('',(#242467,#242478,#242486,#242495,#242503,#242511, + #242519,#242527,#242536)); +#242467 = ORIENTED_EDGE('',*,*,#242468,.T.); +#242468 = EDGE_CURVE('',#242469,#242471,#242473,.T.); +#242469 = VERTEX_POINT('',#242470); +#242470 = CARTESIAN_POINT('',(179.417494,-50.071478,1.585)); +#242471 = VERTEX_POINT('',#242472); +#242472 = CARTESIAN_POINT('',(179.379093,-49.944886,1.585)); +#242473 = CIRCLE('',#242474,7.500021013109E-02); +#242474 = AXIS2_PLACEMENT_3D('',#242475,#242476,#242477); +#242475 = CARTESIAN_POINT('',(179.4321263167,-49.99791899764,1.585)); +#242476 = DIRECTION('',(0.,0.,-1.)); +#242477 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#242478 = ORIENTED_EDGE('',*,*,#242479,.T.); +#242479 = EDGE_CURVE('',#242471,#242480,#242482,.T.); +#242480 = VERTEX_POINT('',#242481); +#242481 = CARTESIAN_POINT('',(179.457193,-49.866785,1.585)); +#242482 = LINE('',#242483,#242484); +#242483 = CARTESIAN_POINT('',(179.379093,-49.944886,1.585)); +#242484 = VECTOR('',#242485,1.); +#242485 = DIRECTION('',(0.707102254269,0.707111308075,0.)); +#242486 = ORIENTED_EDGE('',*,*,#242487,.T.); +#242487 = EDGE_CURVE('',#242480,#242488,#242490,.T.); +#242488 = VERTEX_POINT('',#242489); +#242489 = CARTESIAN_POINT('',(179.60335,-49.9852,1.585)); +#242490 = CIRCLE('',#242491,0.149052213346); +#242491 = AXIS2_PLACEMENT_3D('',#242492,#242493,#242494); +#242492 = CARTESIAN_POINT('',(179.6030626008,-49.83614806373,1.585)); +#242493 = DIRECTION('',(0.,0.,1.)); +#242494 = DIRECTION('',(-0.978647666694,-0.205544993797,0.)); +#242495 = ORIENTED_EDGE('',*,*,#242496,.T.); +#242496 = EDGE_CURVE('',#242488,#242497,#242499,.T.); +#242497 = VERTEX_POINT('',#242498); +#242498 = CARTESIAN_POINT('',(179.632614,-49.982318,1.585)); +#242499 = LINE('',#242500,#242501); +#242500 = CARTESIAN_POINT('',(179.60335,-49.9852,1.585)); +#242501 = VECTOR('',#242502,1.); +#242502 = DIRECTION('',(0.995185563998,9.800863844463E-02,0.)); +#242503 = ORIENTED_EDGE('',*,*,#242504,.T.); +#242504 = EDGE_CURVE('',#242497,#242505,#242507,.T.); +#242505 = VERTEX_POINT('',#242506); +#242506 = CARTESIAN_POINT('',(179.686686,-49.95992,1.585)); +#242507 = LINE('',#242508,#242509); +#242508 = CARTESIAN_POINT('',(179.632614,-49.982318,1.585)); +#242509 = VECTOR('',#242510,1.); +#242510 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#242511 = ORIENTED_EDGE('',*,*,#242512,.T.); +#242512 = EDGE_CURVE('',#242505,#242513,#242515,.T.); +#242513 = VERTEX_POINT('',#242514); +#242514 = CARTESIAN_POINT('',(179.723336,-49.923269,1.585)); +#242515 = LINE('',#242516,#242517); +#242516 = CARTESIAN_POINT('',(179.686686,-49.95992,1.585)); +#242517 = VECTOR('',#242518,1.); +#242518 = DIRECTION('',(0.707097134502,0.707116427739,0.)); +#242519 = ORIENTED_EDGE('',*,*,#242520,.T.); +#242520 = EDGE_CURVE('',#242513,#242521,#242523,.T.); +#242521 = VERTEX_POINT('',#242522); +#242522 = CARTESIAN_POINT('',(180.065805,-49.92436,1.585)); +#242523 = LINE('',#242524,#242525); +#242524 = CARTESIAN_POINT('',(179.723336,-49.923269,1.585)); +#242525 = VECTOR('',#242526,1.); +#242526 = DIRECTION('',(0.999994925729,-3.185673634614E-03,0.)); +#242527 = ORIENTED_EDGE('',*,*,#242528,.T.); +#242528 = EDGE_CURVE('',#242521,#242529,#242531,.T.); +#242529 = VERTEX_POINT('',#242530); +#242530 = CARTESIAN_POINT('',(180.051173,-50.072919,1.585)); +#242531 = CIRCLE('',#242532,7.500006711464E-02); +#242532 = AXIS2_PLACEMENT_3D('',#242533,#242534,#242535); +#242533 = CARTESIAN_POINT('',(180.05117306711,-49.99791893288,1.585)); +#242534 = DIRECTION('',(0.,0.,-1.)); +#242535 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#242536 = ORIENTED_EDGE('',*,*,#242537,.T.); +#242537 = EDGE_CURVE('',#242529,#242469,#242538,.T.); +#242538 = LINE('',#242539,#242540); +#242539 = CARTESIAN_POINT('',(180.051173,-50.072919,1.585)); +#242540 = VECTOR('',#242541,1.); +#242541 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#242542 = PLANE('',#242543); +#242543 = AXIS2_PLACEMENT_3D('',#242544,#242545,#242546); +#242544 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242545 = DIRECTION('',(0.,0.,1.)); +#242546 = DIRECTION('',(1.,0.,-0.)); +#242547 = SHELL_BASED_SURFACE_MODEL('',(#242548)); +#242548 = OPEN_SHELL('',(#242549)); +#242549 = ADVANCED_FACE('',(#242550),#242735,.T.); +#242550 = FACE_BOUND('',#242551,.F.); +#242551 = EDGE_LOOP('',(#242552,#242563,#242571,#242580,#242588,#242597, + #242605,#242614,#242622,#242630,#242638,#242647,#242655,#242664, + #242672,#242681,#242689,#242697,#242705,#242713,#242721,#242729)); +#242552 = ORIENTED_EDGE('',*,*,#242553,.T.); +#242553 = EDGE_CURVE('',#242554,#242556,#242558,.T.); +#242554 = VERTEX_POINT('',#242555); +#242555 = CARTESIAN_POINT('',(178.633078,-48.980381,1.585)); +#242556 = VERTEX_POINT('',#242557); +#242557 = CARTESIAN_POINT('',(179.092841,-48.983178,1.585)); +#242558 = CIRCLE('',#242559,0.460785175821); +#242559 = AXIS2_PLACEMENT_3D('',#242560,#242561,#242562); +#242560 = CARTESIAN_POINT('',(178.86053010897,-49.38111597024,1.585)); +#242561 = DIRECTION('',(0.,0.,-1.)); +#242562 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#242563 = ORIENTED_EDGE('',*,*,#242564,.T.); +#242564 = EDGE_CURVE('',#242556,#242565,#242567,.T.); +#242565 = VERTEX_POINT('',#242566); +#242566 = CARTESIAN_POINT('',(179.161152,-49.051489,1.585)); +#242567 = LINE('',#242568,#242569); +#242568 = CARTESIAN_POINT('',(179.092841,-48.983178,1.585)); +#242569 = VECTOR('',#242570,1.); +#242570 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242571 = ORIENTED_EDGE('',*,*,#242572,.T.); +#242572 = EDGE_CURVE('',#242565,#242573,#242575,.T.); +#242573 = VERTEX_POINT('',#242574); +#242574 = CARTESIAN_POINT('',(179.045759,-49.14619,1.585)); +#242575 = CIRCLE('',#242576,7.500003178655E-02); +#242576 = AXIS2_PLACEMENT_3D('',#242577,#242578,#242579); +#242577 = CARTESIAN_POINT('',(179.09879156212,-49.0931565,1.585)); +#242578 = DIRECTION('',(0.,0.,-1.)); +#242579 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#242580 = ORIENTED_EDGE('',*,*,#242581,.T.); +#242581 = EDGE_CURVE('',#242573,#242582,#242584,.T.); +#242582 = VERTEX_POINT('',#242583); +#242583 = CARTESIAN_POINT('',(179.010659,-49.11109,1.585)); +#242584 = LINE('',#242585,#242586); +#242585 = CARTESIAN_POINT('',(179.045759,-49.14619,1.585)); +#242586 = VECTOR('',#242587,1.); +#242587 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242588 = ORIENTED_EDGE('',*,*,#242589,.T.); +#242589 = EDGE_CURVE('',#242582,#242590,#242592,.T.); +#242590 = VERTEX_POINT('',#242591); +#242591 = CARTESIAN_POINT('',(178.710735,-49.11109,1.585)); +#242592 = CIRCLE('',#242593,0.299308637371); +#242593 = AXIS2_PLACEMENT_3D('',#242594,#242595,#242596); +#242594 = CARTESIAN_POINT('',(178.860697,-49.370121,1.585)); +#242595 = DIRECTION('',(0.,0.,1.)); +#242596 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#242597 = ORIENTED_EDGE('',*,*,#242598,.T.); +#242598 = EDGE_CURVE('',#242590,#242599,#242601,.T.); +#242599 = VERTEX_POINT('',#242600); +#242600 = CARTESIAN_POINT('',(178.636622,-49.185203,1.585)); +#242601 = LINE('',#242602,#242603); +#242602 = CARTESIAN_POINT('',(178.710735,-49.11109,1.585)); +#242603 = VECTOR('',#242604,1.); +#242604 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#242605 = ORIENTED_EDGE('',*,*,#242606,.T.); +#242606 = EDGE_CURVE('',#242599,#242607,#242609,.T.); +#242607 = VERTEX_POINT('',#242608); +#242608 = CARTESIAN_POINT('',(178.554745,-49.560113,1.585)); +#242609 = CIRCLE('',#242610,0.611712714363); +#242610 = AXIS2_PLACEMENT_3D('',#242611,#242612,#242613); +#242611 = CARTESIAN_POINT('',(179.16315027521,-49.4965876822,1.585)); +#242612 = DIRECTION('',(0.,0.,1.)); +#242613 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#242614 = ORIENTED_EDGE('',*,*,#242615,.T.); +#242615 = EDGE_CURVE('',#242607,#242616,#242618,.T.); +#242616 = VERTEX_POINT('',#242617); +#242617 = CARTESIAN_POINT('',(178.598128,-49.733647,1.585)); +#242618 = LINE('',#242619,#242620); +#242619 = CARTESIAN_POINT('',(178.554745,-49.560113,1.585)); +#242620 = VECTOR('',#242621,1.); +#242621 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#242622 = ORIENTED_EDGE('',*,*,#242623,.T.); +#242623 = EDGE_CURVE('',#242616,#242624,#242626,.T.); +#242624 = VERTEX_POINT('',#242625); +#242625 = CARTESIAN_POINT('',(178.636622,-49.810634,1.585)); +#242626 = LINE('',#242627,#242628); +#242627 = CARTESIAN_POINT('',(178.598128,-49.733647,1.585)); +#242628 = VECTOR('',#242629,1.); +#242629 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#242630 = ORIENTED_EDGE('',*,*,#242631,.T.); +#242631 = EDGE_CURVE('',#242624,#242632,#242634,.T.); +#242632 = VERTEX_POINT('',#242633); +#242633 = CARTESIAN_POINT('',(178.710735,-49.884748,1.585)); +#242634 = LINE('',#242635,#242636); +#242635 = CARTESIAN_POINT('',(178.636622,-49.810634,1.585)); +#242636 = VECTOR('',#242637,1.); +#242637 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#242638 = ORIENTED_EDGE('',*,*,#242639,.T.); +#242639 = EDGE_CURVE('',#242632,#242640,#242642,.T.); +#242640 = VERTEX_POINT('',#242641); +#242641 = CARTESIAN_POINT('',(179.010659,-49.884747,1.585)); +#242642 = CIRCLE('',#242643,0.299305962385); +#242643 = AXIS2_PLACEMENT_3D('',#242644,#242645,#242646); +#242644 = CARTESIAN_POINT('',(178.86069613635,-49.62571959093,1.585)); +#242645 = DIRECTION('',(0.,0.,1.)); +#242646 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#242647 = ORIENTED_EDGE('',*,*,#242648,.T.); +#242648 = EDGE_CURVE('',#242640,#242649,#242651,.T.); +#242649 = VERTEX_POINT('',#242650); +#242650 = CARTESIAN_POINT('',(179.057124,-49.84032,1.585)); +#242651 = LINE('',#242652,#242653); +#242652 = CARTESIAN_POINT('',(179.010659,-49.884747,1.585)); +#242653 = VECTOR('',#242654,1.); +#242654 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#242655 = ORIENTED_EDGE('',*,*,#242656,.T.); +#242656 = EDGE_CURVE('',#242649,#242657,#242659,.T.); +#242657 = VERTEX_POINT('',#242658); +#242658 = CARTESIAN_POINT('',(179.151825,-49.955713,1.585)); +#242659 = CIRCLE('',#242660,7.499993690112E-02); +#242660 = AXIS2_PLACEMENT_3D('',#242661,#242662,#242663); +#242661 = CARTESIAN_POINT('',(179.0987922483,-49.90267982374,1.585)); +#242662 = DIRECTION('',(0.,0.,-1.)); +#242663 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#242664 = ORIENTED_EDGE('',*,*,#242665,.T.); +#242665 = EDGE_CURVE('',#242657,#242666,#242668,.T.); +#242666 = VERTEX_POINT('',#242667); +#242667 = CARTESIAN_POINT('',(179.088315,-50.015457,1.585)); +#242668 = LINE('',#242669,#242670); +#242669 = CARTESIAN_POINT('',(179.151825,-49.955713,1.585)); +#242670 = VECTOR('',#242671,1.); +#242671 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#242672 = ORIENTED_EDGE('',*,*,#242673,.T.); +#242673 = EDGE_CURVE('',#242666,#242674,#242676,.T.); +#242674 = VERTEX_POINT('',#242675); +#242675 = CARTESIAN_POINT('',(178.628553,-50.012661,1.585)); +#242676 = CIRCLE('',#242677,0.461067828848); +#242677 = AXIS2_PLACEMENT_3D('',#242678,#242679,#242680); +#242678 = CARTESIAN_POINT('',(178.86086451268,-49.61439613352,1.585)); +#242679 = DIRECTION('',(-0.,0.,-1.)); +#242680 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#242681 = ORIENTED_EDGE('',*,*,#242682,.T.); +#242682 = EDGE_CURVE('',#242674,#242683,#242685,.T.); +#242683 = VERTEX_POINT('',#242684); +#242684 = CARTESIAN_POINT('',(178.511864,-49.894898,1.585)); +#242685 = LINE('',#242686,#242687); +#242686 = CARTESIAN_POINT('',(178.628553,-50.012661,1.585)); +#242687 = VECTOR('',#242688,1.); +#242688 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#242689 = ORIENTED_EDGE('',*,*,#242690,.T.); +#242690 = EDGE_CURVE('',#242683,#242691,#242693,.T.); +#242691 = VERTEX_POINT('',#242692); +#242692 = CARTESIAN_POINT('',(178.454603,-49.778013,1.585)); +#242693 = LINE('',#242694,#242695); +#242694 = CARTESIAN_POINT('',(178.511864,-49.894898,1.585)); +#242695 = VECTOR('',#242696,1.); +#242696 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#242697 = ORIENTED_EDGE('',*,*,#242698,.T.); +#242698 = EDGE_CURVE('',#242691,#242699,#242701,.T.); +#242699 = VERTEX_POINT('',#242700); +#242700 = CARTESIAN_POINT('',(178.404745,-49.569347,1.585)); +#242701 = LINE('',#242702,#242703); +#242702 = CARTESIAN_POINT('',(178.454603,-49.778013,1.585)); +#242703 = VECTOR('',#242704,1.); +#242704 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#242705 = ORIENTED_EDGE('',*,*,#242706,.T.); +#242706 = EDGE_CURVE('',#242699,#242707,#242709,.T.); +#242707 = VERTEX_POINT('',#242708); +#242708 = CARTESIAN_POINT('',(178.406984,-49.4083,1.585)); +#242709 = LINE('',#242710,#242711); +#242710 = CARTESIAN_POINT('',(178.404745,-49.569347,1.585)); +#242711 = VECTOR('',#242712,1.); +#242712 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#242713 = ORIENTED_EDGE('',*,*,#242714,.T.); +#242714 = EDGE_CURVE('',#242707,#242715,#242717,.T.); +#242715 = VERTEX_POINT('',#242716); +#242716 = CARTESIAN_POINT('',(178.460282,-49.202473,1.585)); +#242717 = LINE('',#242718,#242719); +#242718 = CARTESIAN_POINT('',(178.406984,-49.4083,1.585)); +#242719 = VECTOR('',#242720,1.); +#242720 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#242721 = ORIENTED_EDGE('',*,*,#242722,.T.); +#242722 = EDGE_CURVE('',#242715,#242723,#242725,.T.); +#242723 = VERTEX_POINT('',#242724); +#242724 = CARTESIAN_POINT('',(178.517231,-49.093492,1.585)); +#242725 = LINE('',#242726,#242727); +#242726 = CARTESIAN_POINT('',(178.460282,-49.202473,1.585)); +#242727 = VECTOR('',#242728,1.); +#242728 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#242729 = ORIENTED_EDGE('',*,*,#242730,.T.); +#242730 = EDGE_CURVE('',#242723,#242554,#242731,.T.); +#242731 = LINE('',#242732,#242733); +#242732 = CARTESIAN_POINT('',(178.517231,-49.093492,1.585)); +#242733 = VECTOR('',#242734,1.); +#242734 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#242735 = PLANE('',#242736); +#242736 = AXIS2_PLACEMENT_3D('',#242737,#242738,#242739); +#242737 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242738 = DIRECTION('',(0.,0.,1.)); +#242739 = DIRECTION('',(1.,0.,-0.)); +#242740 = SHELL_BASED_SURFACE_MODEL('',(#242741)); +#242741 = OPEN_SHELL('',(#242742)); +#242742 = ADVANCED_FACE('',(#242743),#242929,.T.); +#242743 = FACE_BOUND('',#242744,.F.); +#242744 = EDGE_LOOP('',(#242745,#242756,#242764,#242773,#242781,#242789, + #242798,#242806,#242815,#242823,#242831,#242839,#242848,#242856, + #242865,#242873,#242882,#242890,#242898,#242906,#242915,#242923)); +#242745 = ORIENTED_EDGE('',*,*,#242746,.T.); +#242746 = EDGE_CURVE('',#242747,#242749,#242751,.T.); +#242747 = VERTEX_POINT('',#242748); +#242748 = CARTESIAN_POINT('',(180.369875,-49.071478,1.585)); +#242749 = VERTEX_POINT('',#242750); +#242750 = CARTESIAN_POINT('',(180.384507,-48.922919,1.585)); +#242751 = CIRCLE('',#242752,7.500006711464E-02); +#242752 = AXIS2_PLACEMENT_3D('',#242753,#242754,#242755); +#242753 = CARTESIAN_POINT('',(180.38450693288,-48.99791906711,1.585)); +#242754 = DIRECTION('',(0.,0.,-1.)); +#242755 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#242756 = ORIENTED_EDGE('',*,*,#242757,.T.); +#242757 = EDGE_CURVE('',#242749,#242758,#242760,.T.); +#242758 = VERTEX_POINT('',#242759); +#242759 = CARTESIAN_POINT('',(181.011292,-48.923681,1.585)); +#242760 = LINE('',#242761,#242762); +#242761 = CARTESIAN_POINT('',(180.384507,-48.922919,1.585)); +#242762 = VECTOR('',#242763,1.); +#242763 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#242764 = ORIENTED_EDGE('',*,*,#242765,.T.); +#242765 = EDGE_CURVE('',#242758,#242766,#242768,.T.); +#242766 = VERTEX_POINT('',#242767); +#242767 = CARTESIAN_POINT('',(181.077113,-49.012551,1.585)); +#242768 = CIRCLE('',#242769,7.447391611626E-02); +#242769 = AXIS2_PLACEMENT_3D('',#242770,#242771,#242772); +#242770 = CARTESIAN_POINT('',(181.00411292664,-48.9978080874,1.585)); +#242771 = DIRECTION('',(0.,0.,-1.)); +#242772 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#242773 = ORIENTED_EDGE('',*,*,#242774,.T.); +#242774 = EDGE_CURVE('',#242766,#242775,#242777,.T.); +#242775 = VERTEX_POINT('',#242776); +#242776 = CARTESIAN_POINT('',(181.059997,-49.047307,1.585)); +#242777 = LINE('',#242778,#242779); +#242778 = CARTESIAN_POINT('',(181.077113,-49.012551,1.585)); +#242779 = VECTOR('',#242780,1.); +#242780 = DIRECTION('',(-0.441795255026,-0.897115908139,0.)); +#242781 = ORIENTED_EDGE('',*,*,#242782,.T.); +#242782 = EDGE_CURVE('',#242775,#242783,#242785,.T.); +#242783 = VERTEX_POINT('',#242784); +#242784 = CARTESIAN_POINT('',(180.833101,-49.306616,1.585)); +#242785 = LINE('',#242786,#242787); +#242786 = CARTESIAN_POINT('',(181.059997,-49.047307,1.585)); +#242787 = VECTOR('',#242788,1.); +#242788 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#242789 = ORIENTED_EDGE('',*,*,#242790,.T.); +#242790 = EDGE_CURVE('',#242783,#242791,#242793,.T.); +#242791 = VERTEX_POINT('',#242792); +#242792 = CARTESIAN_POINT('',(181.077113,-49.554715,1.585)); +#242793 = CIRCLE('',#242794,0.348520834816); +#242794 = AXIS2_PLACEMENT_3D('',#242795,#242796,#242797); +#242795 = CARTESIAN_POINT('',(180.7398076174,-49.64241819931,1.585)); +#242796 = DIRECTION('',(0.,0.,-1.)); +#242797 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#242798 = ORIENTED_EDGE('',*,*,#242799,.T.); +#242799 = EDGE_CURVE('',#242791,#242800,#242802,.T.); +#242800 = VERTEX_POINT('',#242801); +#242801 = CARTESIAN_POINT('',(181.075891,-49.827252,1.585)); +#242802 = LINE('',#242803,#242804); +#242803 = CARTESIAN_POINT('',(181.077113,-49.554715,1.585)); +#242804 = VECTOR('',#242805,1.); +#242805 = DIRECTION('',(-4.483749789464E-03,-0.999989947943,0.)); +#242806 = ORIENTED_EDGE('',*,*,#242807,.T.); +#242807 = EDGE_CURVE('',#242800,#242808,#242810,.T.); +#242808 = VERTEX_POINT('',#242809); +#242809 = CARTESIAN_POINT('',(180.82771,-50.071478,1.585)); +#242810 = CIRCLE('',#242811,0.348635327447); +#242811 = AXIS2_PLACEMENT_3D('',#242812,#242813,#242814); +#242812 = CARTESIAN_POINT('',(180.73993848129,-49.73407208415,1.585)); +#242813 = DIRECTION('',(0.,0.,-1.)); +#242814 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#242815 = ORIENTED_EDGE('',*,*,#242816,.T.); +#242816 = EDGE_CURVE('',#242808,#242817,#242819,.T.); +#242817 = VERTEX_POINT('',#242818); +#242818 = CARTESIAN_POINT('',(180.507554,-50.070256,1.585)); +#242819 = LINE('',#242820,#242821); +#242820 = CARTESIAN_POINT('',(180.82771,-50.071478,1.585)); +#242821 = VECTOR('',#242822,1.); +#242822 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#242823 = ORIENTED_EDGE('',*,*,#242824,.T.); +#242824 = EDGE_CURVE('',#242817,#242825,#242827,.T.); +#242825 = VERTEX_POINT('',#242826); +#242826 = CARTESIAN_POINT('',(180.384841,-50.00805,1.585)); +#242827 = LINE('',#242828,#242829); +#242828 = CARTESIAN_POINT('',(180.507554,-50.070256,1.585)); +#242829 = VECTOR('',#242830,1.); +#242830 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#242831 = ORIENTED_EDGE('',*,*,#242832,.T.); +#242832 = EDGE_CURVE('',#242825,#242833,#242835,.T.); +#242833 = VERTEX_POINT('',#242834); +#242834 = CARTESIAN_POINT('',(180.322146,-49.944347,1.585)); +#242835 = LINE('',#242836,#242837); +#242836 = CARTESIAN_POINT('',(180.384841,-50.00805,1.585)); +#242837 = VECTOR('',#242838,1.); +#242838 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#242839 = ORIENTED_EDGE('',*,*,#242840,.T.); +#242840 = EDGE_CURVE('',#242833,#242841,#242843,.T.); +#242841 = VERTEX_POINT('',#242842); +#242842 = CARTESIAN_POINT('',(180.437541,-49.849648,1.585)); +#242843 = CIRCLE('',#242844,7.50001266804E-02); +#242844 = AXIS2_PLACEMENT_3D('',#242845,#242846,#242847); +#242845 = CARTESIAN_POINT('',(180.38450705199,-49.90268024831,1.585)); +#242846 = DIRECTION('',(0.,0.,-1.)); +#242847 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#242848 = ORIENTED_EDGE('',*,*,#242849,.T.); +#242849 = EDGE_CURVE('',#242841,#242850,#242852,.T.); +#242850 = VERTEX_POINT('',#242851); +#242851 = CARTESIAN_POINT('',(180.476553,-49.888661,1.585)); +#242852 = LINE('',#242853,#242854); +#242853 = CARTESIAN_POINT('',(180.437541,-49.849648,1.585)); +#242854 = VECTOR('',#242855,1.); +#242855 = DIRECTION('',(0.707097718561,-0.707115843695,0.)); +#242856 = ORIENTED_EDGE('',*,*,#242857,.T.); +#242857 = EDGE_CURVE('',#242850,#242858,#242860,.T.); +#242858 = VERTEX_POINT('',#242859); +#242859 = CARTESIAN_POINT('',(180.863888,-49.888661,1.585)); +#242860 = CIRCLE('',#242861,0.358502380266); +#242861 = AXIS2_PLACEMENT_3D('',#242862,#242863,#242864); +#242862 = CARTESIAN_POINT('',(180.6702205,-49.586971,1.585)); +#242863 = DIRECTION('',(0.,0.,1.)); +#242864 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#242865 = ORIENTED_EDGE('',*,*,#242866,.T.); +#242866 = EDGE_CURVE('',#242858,#242867,#242869,.T.); +#242867 = VERTEX_POINT('',#242868); +#242868 = CARTESIAN_POINT('',(180.894295,-49.858253,1.585)); +#242869 = LINE('',#242870,#242871); +#242870 = CARTESIAN_POINT('',(180.863888,-49.888661,1.585)); +#242871 = VECTOR('',#242872,1.); +#242872 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#242873 = ORIENTED_EDGE('',*,*,#242874,.T.); +#242874 = EDGE_CURVE('',#242867,#242875,#242877,.T.); +#242875 = VERTEX_POINT('',#242876); +#242876 = CARTESIAN_POINT('',(180.894296,-49.518536,1.585)); +#242877 = CIRCLE('',#242878,0.305616146029); +#242878 = AXIS2_PLACEMENT_3D('',#242879,#242880,#242881); +#242879 = CARTESIAN_POINT('',(180.64022992049,-49.68839375212,1.585)); +#242880 = DIRECTION('',(0.,-0.,1.)); +#242881 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#242882 = ORIENTED_EDGE('',*,*,#242883,.T.); +#242883 = EDGE_CURVE('',#242875,#242884,#242886,.T.); +#242884 = VERTEX_POINT('',#242885); +#242885 = CARTESIAN_POINT('',(180.863889,-49.488129,1.585)); +#242886 = LINE('',#242887,#242888); +#242887 = CARTESIAN_POINT('',(180.894296,-49.518536,1.585)); +#242888 = VECTOR('',#242889,1.); +#242889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242890 = ORIENTED_EDGE('',*,*,#242891,.T.); +#242891 = EDGE_CURVE('',#242884,#242892,#242894,.T.); +#242892 = VERTEX_POINT('',#242893); +#242893 = CARTESIAN_POINT('',(180.795373,-49.453871,1.585)); +#242894 = LINE('',#242895,#242896); +#242895 = CARTESIAN_POINT('',(180.863889,-49.488129,1.585)); +#242896 = VECTOR('',#242897,1.); +#242897 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#242898 = ORIENTED_EDGE('',*,*,#242899,.T.); +#242899 = EDGE_CURVE('',#242892,#242900,#242902,.T.); +#242900 = VERTEX_POINT('',#242901); +#242901 = CARTESIAN_POINT('',(180.655589,-49.45243,1.585)); +#242902 = LINE('',#242903,#242904); +#242903 = CARTESIAN_POINT('',(180.795373,-49.453871,1.585)); +#242904 = VECTOR('',#242905,1.); +#242905 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#242906 = ORIENTED_EDGE('',*,*,#242907,.T.); +#242907 = EDGE_CURVE('',#242900,#242908,#242910,.T.); +#242908 = VERTEX_POINT('',#242909); +#242909 = CARTESIAN_POINT('',(180.613778,-49.329483,1.585)); +#242910 = CIRCLE('',#242911,7.500015628756E-02); +#242911 = AXIS2_PLACEMENT_3D('',#242912,#242913,#242914); +#242912 = CARTESIAN_POINT('',(180.67022128432,-49.3788710461,1.585)); +#242913 = DIRECTION('',(0.,0.,-1.)); +#242914 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#242915 = ORIENTED_EDGE('',*,*,#242916,.T.); +#242916 = EDGE_CURVE('',#242908,#242917,#242919,.T.); +#242917 = VERTEX_POINT('',#242918); +#242918 = CARTESIAN_POINT('',(180.838272,-49.072919,1.585)); +#242919 = LINE('',#242920,#242921); +#242920 = CARTESIAN_POINT('',(180.613778,-49.329483,1.585)); +#242921 = VECTOR('',#242922,1.); +#242922 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#242923 = ORIENTED_EDGE('',*,*,#242924,.T.); +#242924 = EDGE_CURVE('',#242917,#242747,#242925,.T.); +#242925 = LINE('',#242926,#242927); +#242926 = CARTESIAN_POINT('',(180.838272,-49.072919,1.585)); +#242927 = VECTOR('',#242928,1.); +#242928 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#242929 = PLANE('',#242930); +#242930 = AXIS2_PLACEMENT_3D('',#242931,#242932,#242933); +#242931 = CARTESIAN_POINT('',(0.,0.,1.585)); +#242932 = DIRECTION('',(0.,0.,1.)); +#242933 = DIRECTION('',(1.,0.,-0.)); +#242934 = SHELL_BASED_SURFACE_MODEL('',(#242935)); +#242935 = OPEN_SHELL('',(#242936)); +#242936 = ADVANCED_FACE('',(#242937),#243080,.T.); +#242937 = FACE_BOUND('',#242938,.F.); +#242938 = EDGE_LOOP('',(#242939,#242949,#242957,#242965,#242974,#242982, + #242990,#242999,#243007,#243015,#243024,#243032,#243040,#243049, + #243057,#243066,#243074)); +#242939 = ORIENTED_EDGE('',*,*,#242940,.T.); +#242940 = EDGE_CURVE('',#242941,#242943,#242945,.T.); +#242941 = VERTEX_POINT('',#242942); +#242942 = CARTESIAN_POINT('',(210.289335,-48.670572,1.585)); +#242943 = VERTEX_POINT('',#242944); +#242944 = CARTESIAN_POINT('',(210.312175,-48.649656,1.585)); +#242945 = LINE('',#242946,#242947); +#242946 = CARTESIAN_POINT('',(210.289335,-48.670572,1.585)); +#242947 = VECTOR('',#242948,1.); +#242948 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#242949 = ORIENTED_EDGE('',*,*,#242950,.T.); +#242950 = EDGE_CURVE('',#242943,#242951,#242953,.T.); +#242951 = VERTEX_POINT('',#242952); +#242952 = CARTESIAN_POINT('',(210.341282,-48.639071,1.585)); +#242953 = LINE('',#242954,#242955); +#242954 = CARTESIAN_POINT('',(210.312175,-48.649656,1.585)); +#242955 = VECTOR('',#242956,1.); +#242956 = DIRECTION('',(0.939786824446,0.341761209907,0.)); +#242957 = ORIENTED_EDGE('',*,*,#242958,.T.); +#242958 = EDGE_CURVE('',#242951,#242959,#242961,.T.); +#242959 = VERTEX_POINT('',#242960); +#242960 = CARTESIAN_POINT('',(210.355046,-48.639676,1.585)); +#242961 = LINE('',#242962,#242963); +#242962 = CARTESIAN_POINT('',(210.341282,-48.639071,1.585)); +#242963 = VECTOR('',#242964,1.); +#242964 = DIRECTION('',(0.99903536577,-4.391284483375E-02,0.)); +#242965 = ORIENTED_EDGE('',*,*,#242966,.T.); +#242966 = EDGE_CURVE('',#242959,#242967,#242969,.T.); +#242967 = VERTEX_POINT('',#242968); +#242968 = CARTESIAN_POINT('',(210.425908,-48.689307,1.585)); +#242969 = CIRCLE('',#242970,7.786403695721E-02); +#242970 = AXIS2_PLACEMENT_3D('',#242971,#242972,#242973); +#242971 = CARTESIAN_POINT('',(210.3533355224,-48.71752124723,1.585)); +#242972 = DIRECTION('',(0.,0.,-1.)); +#242973 = DIRECTION('',(2.196749179824E-02,0.999758685536,0.)); +#242974 = ORIENTED_EDGE('',*,*,#242975,.T.); +#242975 = EDGE_CURVE('',#242967,#242976,#242978,.T.); +#242976 = VERTEX_POINT('',#242977); +#242977 = CARTESIAN_POINT('',(210.432708,-48.717526,1.585)); +#242978 = LINE('',#242979,#242980); +#242979 = CARTESIAN_POINT('',(210.425908,-48.689307,1.585)); +#242980 = VECTOR('',#242981,1.); +#242981 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#242982 = ORIENTED_EDGE('',*,*,#242983,.T.); +#242983 = EDGE_CURVE('',#242976,#242984,#242986,.T.); +#242984 = VERTEX_POINT('',#242985); +#242985 = CARTESIAN_POINT('',(210.431183,-50.003011,1.585)); +#242986 = LINE('',#242987,#242988); +#242987 = CARTESIAN_POINT('',(210.432708,-48.717526,1.585)); +#242988 = VECTOR('',#242989,1.); +#242989 = DIRECTION('',(-1.186321837186E-03,-0.99999929632,0.)); +#242990 = ORIENTED_EDGE('',*,*,#242991,.T.); +#242991 = EDGE_CURVE('',#242984,#242992,#242994,.T.); +#242992 = VERTEX_POINT('',#242993); +#242993 = CARTESIAN_POINT('',(210.275483,-50.003011,1.585)); +#242994 = CIRCLE('',#242995,7.937510771646E-02); +#242995 = AXIS2_PLACEMENT_3D('',#242996,#242997,#242998); +#242996 = CARTESIAN_POINT('',(210.353333,-49.987526,1.585)); +#242997 = DIRECTION('',(-0.,0.,-1.)); +#242998 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#242999 = ORIENTED_EDGE('',*,*,#243000,.T.); +#243000 = EDGE_CURVE('',#242992,#243001,#243003,.T.); +#243001 = VERTEX_POINT('',#243002); +#243002 = CARTESIAN_POINT('',(210.273958,-49.075314,1.585)); +#243003 = LINE('',#243004,#243005); +#243004 = CARTESIAN_POINT('',(210.275483,-50.003011,1.585)); +#243005 = VECTOR('',#243006,1.); +#243006 = DIRECTION('',(-1.643853477531E-03,0.999998648872,0.)); +#243007 = ORIENTED_EDGE('',*,*,#243008,.T.); +#243008 = EDGE_CURVE('',#243001,#243009,#243011,.T.); +#243009 = VERTEX_POINT('',#243010); +#243010 = CARTESIAN_POINT('',(209.993998,-49.671623,1.585)); +#243011 = LINE('',#243012,#243013); +#243012 = CARTESIAN_POINT('',(210.273958,-49.075314,1.585)); +#243013 = VECTOR('',#243014,1.); +#243014 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#243015 = ORIENTED_EDGE('',*,*,#243016,.T.); +#243016 = EDGE_CURVE('',#243009,#243017,#243019,.T.); +#243017 = VERTEX_POINT('',#243018); +#243018 = CARTESIAN_POINT('',(209.858072,-49.658235,1.585)); +#243019 = CIRCLE('',#243020,7.937464557819E-02); +#243020 = AXIS2_PLACEMENT_3D('',#243021,#243022,#243023); +#243021 = CARTESIAN_POINT('',(209.93000035502,-49.62466945063,1.585)); +#243022 = DIRECTION('',(-0.,0.,-1.)); +#243023 = DIRECTION('',(0.806273143147,-0.591543420756,-0.)); +#243024 = ORIENTED_EDGE('',*,*,#243025,.T.); +#243025 = EDGE_CURVE('',#243017,#243026,#243028,.T.); +#243026 = VERTEX_POINT('',#243027); +#243027 = CARTESIAN_POINT('',(209.586041,-49.075312,1.585)); +#243028 = LINE('',#243029,#243030); +#243029 = CARTESIAN_POINT('',(209.858072,-49.658235,1.585)); +#243030 = VECTOR('',#243031,1.); +#243031 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#243032 = ORIENTED_EDGE('',*,*,#243033,.T.); +#243033 = EDGE_CURVE('',#243026,#243034,#243036,.T.); +#243034 = VERTEX_POINT('',#243035); +#243035 = CARTESIAN_POINT('',(209.584516,-50.003011,1.585)); +#243036 = LINE('',#243037,#243038); +#243037 = CARTESIAN_POINT('',(209.586041,-49.075312,1.585)); +#243038 = VECTOR('',#243039,1.); +#243039 = DIRECTION('',(-1.643849933573E-03,-0.999998648878,0.)); +#243040 = ORIENTED_EDGE('',*,*,#243041,.T.); +#243041 = EDGE_CURVE('',#243034,#243042,#243044,.T.); +#243042 = VERTEX_POINT('',#243043); +#243043 = CARTESIAN_POINT('',(209.428816,-50.003011,1.585)); +#243044 = CIRCLE('',#243045,7.937510771646E-02); +#243045 = AXIS2_PLACEMENT_3D('',#243046,#243047,#243048); +#243046 = CARTESIAN_POINT('',(209.506666,-49.987526,1.585)); +#243047 = DIRECTION('',(-0.,0.,-1.)); +#243048 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#243049 = ORIENTED_EDGE('',*,*,#243050,.T.); +#243050 = EDGE_CURVE('',#243042,#243051,#243053,.T.); +#243051 = VERTEX_POINT('',#243052); +#243052 = CARTESIAN_POINT('',(209.428816,-48.702041,1.585)); +#243053 = LINE('',#243054,#243055); +#243054 = CARTESIAN_POINT('',(209.428816,-50.003011,1.585)); +#243055 = VECTOR('',#243056,1.); +#243056 = DIRECTION('',(0.,1.,0.)); +#243057 = ORIENTED_EDGE('',*,*,#243058,.T.); +#243058 = EDGE_CURVE('',#243051,#243059,#243061,.T.); +#243059 = VERTEX_POINT('',#243060); +#243060 = CARTESIAN_POINT('',(209.578594,-48.683959,1.585)); +#243061 = CIRCLE('',#243062,7.937498694708E-02); +#243062 = AXIS2_PLACEMENT_3D('',#243063,#243064,#243065); +#243063 = CARTESIAN_POINT('',(209.50666589729,-48.71752589729,1.585)); +#243064 = DIRECTION('',(0.,0.,-1.)); +#243065 = DIRECTION('',(-0.980786268925,0.195085352318,0.)); +#243066 = ORIENTED_EDGE('',*,*,#243067,.T.); +#243067 = EDGE_CURVE('',#243059,#243068,#243070,.T.); +#243068 = VERTEX_POINT('',#243069); +#243069 = CARTESIAN_POINT('',(209.929999,-49.43697,1.585)); +#243070 = LINE('',#243071,#243072); +#243071 = CARTESIAN_POINT('',(209.578594,-48.683959,1.585)); +#243072 = VECTOR('',#243073,1.); +#243073 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#243074 = ORIENTED_EDGE('',*,*,#243075,.T.); +#243075 = EDGE_CURVE('',#243068,#242941,#243076,.T.); +#243076 = LINE('',#243077,#243078); +#243077 = CARTESIAN_POINT('',(209.929999,-49.43697,1.585)); +#243078 = VECTOR('',#243079,1.); +#243079 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#243080 = PLANE('',#243081); +#243081 = AXIS2_PLACEMENT_3D('',#243082,#243083,#243084); +#243082 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243083 = DIRECTION('',(0.,0.,1.)); +#243084 = DIRECTION('',(1.,0.,-0.)); +#243085 = SHELL_BASED_SURFACE_MODEL('',(#243086)); +#243086 = OPEN_SHELL('',(#243087)); +#243087 = ADVANCED_FACE('',(#243088),#243206,.T.); +#243088 = FACE_BOUND('',#243089,.F.); +#243089 = EDGE_LOOP('',(#243090,#243101,#243109,#243117,#243125,#243134, + #243142,#243151,#243159,#243167,#243175,#243184,#243192,#243200)); +#243090 = ORIENTED_EDGE('',*,*,#243091,.T.); +#243091 = EDGE_CURVE('',#243092,#243094,#243096,.T.); +#243092 = VERTEX_POINT('',#243093); +#243093 = CARTESIAN_POINT('',(210.913997,-48.651528,1.585)); +#243094 = VERTEX_POINT('',#243095); +#243095 = CARTESIAN_POINT('',(211.035945,-48.702041,1.585)); +#243096 = CIRCLE('',#243097,7.937518132317E-02); +#243097 = AXIS2_PLACEMENT_3D('',#243098,#243099,#243100); +#243098 = CARTESIAN_POINT('',(210.958095,-48.71752637729,1.585)); +#243099 = DIRECTION('',(0.,0.,-1.)); +#243100 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#243101 = ORIENTED_EDGE('',*,*,#243102,.T.); +#243102 = EDGE_CURVE('',#243094,#243103,#243105,.T.); +#243103 = VERTEX_POINT('',#243104); +#243104 = CARTESIAN_POINT('',(211.03747,-49.242913,1.585)); +#243105 = LINE('',#243106,#243107); +#243106 = CARTESIAN_POINT('',(211.035945,-48.702041,1.585)); +#243107 = VECTOR('',#243108,1.); +#243108 = DIRECTION('',(2.819509862603E-03,-0.999996025174,0.)); +#243109 = ORIENTED_EDGE('',*,*,#243110,.T.); +#243110 = EDGE_CURVE('',#243103,#243111,#243113,.T.); +#243111 = VERTEX_POINT('',#243112); +#243112 = CARTESIAN_POINT('',(211.604435,-49.242913,1.585)); +#243113 = LINE('',#243114,#243115); +#243114 = CARTESIAN_POINT('',(211.03747,-49.242913,1.585)); +#243115 = VECTOR('',#243116,1.); +#243116 = DIRECTION('',(1.,0.,0.)); +#243117 = ORIENTED_EDGE('',*,*,#243118,.T.); +#243118 = EDGE_CURVE('',#243111,#243119,#243121,.T.); +#243119 = VERTEX_POINT('',#243120); +#243120 = CARTESIAN_POINT('',(211.60596,-48.702041,1.585)); +#243121 = LINE('',#243122,#243123); +#243122 = CARTESIAN_POINT('',(211.604435,-49.242913,1.585)); +#243123 = VECTOR('',#243124,1.); +#243124 = DIRECTION('',(2.819509862603E-03,0.999996025174,0.)); +#243125 = ORIENTED_EDGE('',*,*,#243126,.T.); +#243126 = EDGE_CURVE('',#243119,#243127,#243129,.T.); +#243127 = VERTEX_POINT('',#243128); +#243128 = CARTESIAN_POINT('',(211.76166,-48.702041,1.585)); +#243129 = CIRCLE('',#243130,7.937510771646E-02); +#243130 = AXIS2_PLACEMENT_3D('',#243131,#243132,#243133); +#243131 = CARTESIAN_POINT('',(211.68381,-48.717526,1.585)); +#243132 = DIRECTION('',(0.,0.,-1.)); +#243133 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#243134 = ORIENTED_EDGE('',*,*,#243135,.T.); +#243135 = EDGE_CURVE('',#243127,#243136,#243138,.T.); +#243136 = VERTEX_POINT('',#243137); +#243137 = CARTESIAN_POINT('',(211.76166,-50.003011,1.585)); +#243138 = LINE('',#243139,#243140); +#243139 = CARTESIAN_POINT('',(211.76166,-48.702041,1.585)); +#243140 = VECTOR('',#243141,1.); +#243141 = DIRECTION('',(0.,-1.,0.)); +#243142 = ORIENTED_EDGE('',*,*,#243143,.T.); +#243143 = EDGE_CURVE('',#243136,#243144,#243146,.T.); +#243144 = VERTEX_POINT('',#243145); +#243145 = CARTESIAN_POINT('',(211.60596,-50.003011,1.585)); +#243146 = CIRCLE('',#243147,7.937510771646E-02); +#243147 = AXIS2_PLACEMENT_3D('',#243148,#243149,#243150); +#243148 = CARTESIAN_POINT('',(211.68381,-49.987526,1.585)); +#243149 = DIRECTION('',(-0.,0.,-1.)); +#243150 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#243151 = ORIENTED_EDGE('',*,*,#243152,.T.); +#243152 = EDGE_CURVE('',#243144,#243153,#243155,.T.); +#243153 = VERTEX_POINT('',#243154); +#243154 = CARTESIAN_POINT('',(211.604435,-49.401663,1.585)); +#243155 = LINE('',#243156,#243157); +#243156 = CARTESIAN_POINT('',(211.60596,-50.003011,1.585)); +#243157 = VECTOR('',#243158,1.); +#243158 = DIRECTION('',(-2.5359610347E-03,0.999996784446,0.)); +#243159 = ORIENTED_EDGE('',*,*,#243160,.T.); +#243160 = EDGE_CURVE('',#243153,#243161,#243163,.T.); +#243161 = VERTEX_POINT('',#243162); +#243162 = CARTESIAN_POINT('',(211.03747,-49.401663,1.585)); +#243163 = LINE('',#243164,#243165); +#243164 = CARTESIAN_POINT('',(211.604435,-49.401663,1.585)); +#243165 = VECTOR('',#243166,1.); +#243166 = DIRECTION('',(-1.,0.,0.)); +#243167 = ORIENTED_EDGE('',*,*,#243168,.T.); +#243168 = EDGE_CURVE('',#243161,#243169,#243171,.T.); +#243169 = VERTEX_POINT('',#243170); +#243170 = CARTESIAN_POINT('',(211.035945,-50.003011,1.585)); +#243171 = LINE('',#243172,#243173); +#243172 = CARTESIAN_POINT('',(211.03747,-49.401663,1.585)); +#243173 = VECTOR('',#243174,1.); +#243174 = DIRECTION('',(-2.5359610347E-03,-0.999996784446,0.)); +#243175 = ORIENTED_EDGE('',*,*,#243176,.T.); +#243176 = EDGE_CURVE('',#243169,#243177,#243179,.T.); +#243177 = VERTEX_POINT('',#243178); +#243178 = CARTESIAN_POINT('',(210.880245,-50.003011,1.585)); +#243179 = CIRCLE('',#243180,7.937510771646E-02); +#243180 = AXIS2_PLACEMENT_3D('',#243181,#243182,#243183); +#243181 = CARTESIAN_POINT('',(210.958095,-49.987526,1.585)); +#243182 = DIRECTION('',(-0.,0.,-1.)); +#243183 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#243184 = ORIENTED_EDGE('',*,*,#243185,.T.); +#243185 = EDGE_CURVE('',#243177,#243186,#243188,.T.); +#243186 = VERTEX_POINT('',#243187); +#243187 = CARTESIAN_POINT('',(210.880245,-48.702041,1.585)); +#243188 = LINE('',#243189,#243190); +#243189 = CARTESIAN_POINT('',(210.880245,-50.003011,1.585)); +#243190 = VECTOR('',#243191,1.); +#243191 = DIRECTION('',(0.,1.,0.)); +#243192 = ORIENTED_EDGE('',*,*,#243193,.T.); +#243193 = EDGE_CURVE('',#243186,#243194,#243196,.T.); +#243194 = VERTEX_POINT('',#243195); +#243195 = CARTESIAN_POINT('',(210.892097,-48.673428,1.585)); +#243196 = LINE('',#243197,#243198); +#243197 = CARTESIAN_POINT('',(210.880245,-48.702041,1.585)); +#243198 = VECTOR('',#243199,1.); +#243199 = DIRECTION('',(0.382686390668,0.923878307137,0.)); +#243200 = ORIENTED_EDGE('',*,*,#243201,.T.); +#243201 = EDGE_CURVE('',#243194,#243092,#243202,.T.); +#243202 = LINE('',#243203,#243204); +#243203 = CARTESIAN_POINT('',(210.892097,-48.673428,1.585)); +#243204 = VECTOR('',#243205,1.); +#243205 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#243206 = PLANE('',#243207); +#243207 = AXIS2_PLACEMENT_3D('',#243208,#243209,#243210); +#243208 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243209 = DIRECTION('',(0.,0.,1.)); +#243210 = DIRECTION('',(1.,0.,-0.)); +#243211 = SHELL_BASED_SURFACE_MODEL('',(#243212)); +#243212 = OPEN_SHELL('',(#243213)); +#243213 = ADVANCED_FACE('',(#243214),#243373,.T.); +#243214 = FACE_BOUND('',#243215,.F.); +#243215 = EDGE_LOOP('',(#243216,#243227,#243235,#243243,#243251,#243259, + #243267,#243275,#243284,#243292,#243301,#243309,#243317,#243325, + #243334,#243342,#243350,#243358,#243367)); +#243216 = ORIENTED_EDGE('',*,*,#243217,.T.); +#243217 = EDGE_CURVE('',#243218,#243220,#243222,.T.); +#243218 = VERTEX_POINT('',#243219); +#243219 = CARTESIAN_POINT('',(212.246411,-48.7112,1.585)); +#243220 = VERTEX_POINT('',#243221); +#243221 = CARTESIAN_POINT('',(212.882891,-48.716875,1.585)); +#243222 = CIRCLE('',#243223,0.556795040199); +#243223 = AXIS2_PLACEMENT_3D('',#243224,#243225,#243226); +#243224 = CARTESIAN_POINT('',(212.56057754908,-49.17089565608,1.585)); +#243225 = DIRECTION('',(0.,0.,-1.)); +#243226 = DIRECTION('',(-0.564240926027,0.825610184891,0.)); +#243227 = ORIENTED_EDGE('',*,*,#243228,.T.); +#243228 = EDGE_CURVE('',#243220,#243229,#243231,.T.); +#243229 = VERTEX_POINT('',#243230); +#243230 = CARTESIAN_POINT('',(212.960133,-48.796316,1.585)); +#243231 = LINE('',#243232,#243233); +#243232 = CARTESIAN_POINT('',(212.882891,-48.716875,1.585)); +#243233 = VECTOR('',#243234,1.); +#243234 = DIRECTION('',(0.697114091734,-0.716960210267,0.)); +#243235 = ORIENTED_EDGE('',*,*,#243236,.T.); +#243236 = EDGE_CURVE('',#243229,#243237,#243239,.T.); +#243237 = VERTEX_POINT('',#243238); +#243238 = CARTESIAN_POINT('',(213.03166,-48.943945,1.585)); +#243239 = LINE('',#243240,#243241); +#243240 = CARTESIAN_POINT('',(212.960133,-48.796316,1.585)); +#243241 = VECTOR('',#243242,1.); +#243242 = DIRECTION('',(0.436023266637,-0.899935392654,0.)); +#243243 = ORIENTED_EDGE('',*,*,#243244,.T.); +#243244 = EDGE_CURVE('',#243237,#243245,#243247,.T.); +#243245 = VERTEX_POINT('',#243246); +#243246 = CARTESIAN_POINT('',(213.030858,-49.097802,1.585)); +#243247 = LINE('',#243248,#243249); +#243248 = CARTESIAN_POINT('',(213.03166,-48.943945,1.585)); +#243249 = VECTOR('',#243250,1.); +#243250 = DIRECTION('',(-5.212561693186E-03,-0.999986414508,0.)); +#243251 = ORIENTED_EDGE('',*,*,#243252,.T.); +#243252 = EDGE_CURVE('',#243245,#243253,#243255,.T.); +#243253 = VERTEX_POINT('',#243254); +#243254 = CARTESIAN_POINT('',(212.959331,-49.30591,1.585)); +#243255 = LINE('',#243256,#243257); +#243256 = CARTESIAN_POINT('',(213.030858,-49.097802,1.585)); +#243257 = VECTOR('',#243258,1.); +#243258 = DIRECTION('',(-0.325038619661,-0.945700743221,0.)); +#243259 = ORIENTED_EDGE('',*,*,#243260,.T.); +#243260 = EDGE_CURVE('',#243253,#243261,#243263,.T.); +#243261 = VERTEX_POINT('',#243262); +#243262 = CARTESIAN_POINT('',(212.359248,-49.908151,1.585)); +#243263 = LINE('',#243264,#243265); +#243264 = CARTESIAN_POINT('',(212.959331,-49.30591,1.585)); +#243265 = VECTOR('',#243266,1.); +#243266 = DIRECTION('',(-0.705836488494,-0.708374795931,0.)); +#243267 = ORIENTED_EDGE('',*,*,#243268,.T.); +#243268 = EDGE_CURVE('',#243261,#243269,#243271,.T.); +#243269 = VERTEX_POINT('',#243270); +#243270 = CARTESIAN_POINT('',(212.969295,-49.909676,1.585)); +#243271 = LINE('',#243272,#243273); +#243272 = CARTESIAN_POINT('',(212.359248,-49.908151,1.585)); +#243273 = VECTOR('',#243274,1.); +#243274 = DIRECTION('',(0.999996875496,-2.499799581233E-03,0.)); +#243275 = ORIENTED_EDGE('',*,*,#243276,.T.); +#243276 = EDGE_CURVE('',#243269,#243277,#243279,.T.); +#243277 = VERTEX_POINT('',#243278); +#243278 = CARTESIAN_POINT('',(212.969295,-50.065376,1.585)); +#243279 = CIRCLE('',#243280,7.937510771647E-02); +#243280 = AXIS2_PLACEMENT_3D('',#243281,#243282,#243283); +#243281 = CARTESIAN_POINT('',(212.95381,-49.987526,1.585)); +#243282 = DIRECTION('',(0.,0.,-1.)); +#243283 = DIRECTION('',(0.19508634943,0.980786070591,0.)); +#243284 = ORIENTED_EDGE('',*,*,#243285,.T.); +#243285 = EDGE_CURVE('',#243277,#243286,#243288,.T.); +#243286 = VERTEX_POINT('',#243287); +#243287 = CARTESIAN_POINT('',(212.152133,-50.065376,1.585)); +#243288 = LINE('',#243289,#243290); +#243289 = CARTESIAN_POINT('',(212.969295,-50.065376,1.585)); +#243290 = VECTOR('',#243291,1.); +#243291 = DIRECTION('',(-1.,0.,0.)); +#243292 = ORIENTED_EDGE('',*,*,#243293,.T.); +#243293 = EDGE_CURVE('',#243286,#243294,#243296,.T.); +#243294 = VERTEX_POINT('',#243295); +#243295 = CARTESIAN_POINT('',(212.101621,-49.943427,1.585)); +#243296 = CIRCLE('',#243297,7.93752659056E-02); +#243297 = AXIS2_PLACEMENT_3D('',#243298,#243299,#243300); +#243298 = CARTESIAN_POINT('',(212.16761881084,-49.987526,1.585)); +#243299 = DIRECTION('',(0.,0.,-1.)); +#243300 = DIRECTION('',(-0.195096175997,-0.980784115956,-0.)); +#243301 = ORIENTED_EDGE('',*,*,#243302,.T.); +#243302 = EDGE_CURVE('',#243294,#243303,#243305,.T.); +#243303 = VERTEX_POINT('',#243304); +#243304 = CARTESIAN_POINT('',(212.823956,-49.218934,1.585)); +#243305 = LINE('',#243306,#243307); +#243306 = CARTESIAN_POINT('',(212.101621,-49.943427,1.585)); +#243307 = VECTOR('',#243308,1.); +#243308 = DIRECTION('',(0.706051318664,0.70816067062,0.)); +#243309 = ORIENTED_EDGE('',*,*,#243310,.T.); +#243310 = EDGE_CURVE('',#243303,#243311,#243313,.T.); +#243311 = VERTEX_POINT('',#243312); +#243312 = CARTESIAN_POINT('',(212.874435,-49.0675,1.585)); +#243313 = LINE('',#243314,#243315); +#243314 = CARTESIAN_POINT('',(212.823956,-49.218934,1.585)); +#243315 = VECTOR('',#243316,1.); +#243316 = DIRECTION('',(0.316233404199,0.948681418638,0.)); +#243317 = ORIENTED_EDGE('',*,*,#243318,.T.); +#243318 = EDGE_CURVE('',#243311,#243319,#243321,.T.); +#243319 = VERTEX_POINT('',#243320); +#243320 = CARTESIAN_POINT('',(212.874435,-48.978168,1.585)); +#243321 = LINE('',#243322,#243323); +#243322 = CARTESIAN_POINT('',(212.874435,-49.0675,1.585)); +#243323 = VECTOR('',#243324,1.); +#243324 = DIRECTION('',(0.,1.,0.)); +#243325 = ORIENTED_EDGE('',*,*,#243326,.T.); +#243326 = EDGE_CURVE('',#243319,#243327,#243329,.T.); +#243327 = VERTEX_POINT('',#243328); +#243328 = CARTESIAN_POINT('',(212.693167,-48.796901,1.585)); +#243329 = CIRCLE('',#243330,0.255230246246); +#243330 = AXIS2_PLACEMENT_3D('',#243331,#243332,#243333); +#243331 = CARTESIAN_POINT('',(212.62773489768,-49.04360146328,1.585)); +#243332 = DIRECTION('',(0.,0.,1.)); +#243333 = DIRECTION('',(0.966578632201,0.256370333254,-0.)); +#243334 = ORIENTED_EDGE('',*,*,#243335,.T.); +#243335 = EDGE_CURVE('',#243327,#243336,#243338,.T.); +#243336 = VERTEX_POINT('',#243337); +#243337 = CARTESIAN_POINT('',(212.428261,-48.796901,1.585)); +#243338 = LINE('',#243339,#243340); +#243339 = CARTESIAN_POINT('',(212.693167,-48.796901,1.585)); +#243340 = VECTOR('',#243341,1.); +#243341 = DIRECTION('',(-1.,0.,0.)); +#243342 = ORIENTED_EDGE('',*,*,#243343,.T.); +#243343 = EDGE_CURVE('',#243336,#243344,#243346,.T.); +#243344 = VERTEX_POINT('',#243345); +#243345 = CARTESIAN_POINT('',(212.335591,-48.843235,1.585)); +#243346 = LINE('',#243347,#243348); +#243347 = CARTESIAN_POINT('',(212.428261,-48.796901,1.585)); +#243348 = VECTOR('',#243349,1.); +#243349 = DIRECTION('',(-0.894431051681,-0.447205874054,0.)); +#243350 = ORIENTED_EDGE('',*,*,#243351,.T.); +#243351 = EDGE_CURVE('',#243344,#243352,#243354,.T.); +#243352 = VERTEX_POINT('',#243353); +#243353 = CARTESIAN_POINT('',(212.272194,-48.904476,1.585)); +#243354 = LINE('',#243355,#243356); +#243355 = CARTESIAN_POINT('',(212.335591,-48.843235,1.585)); +#243356 = VECTOR('',#243357,1.); +#243357 = DIRECTION('',(-0.719230784119,-0.694771242334,0.)); +#243358 = ORIENTED_EDGE('',*,*,#243359,.T.); +#243359 = EDGE_CURVE('',#243352,#243360,#243362,.T.); +#243360 = VERTEX_POINT('',#243361); +#243361 = CARTESIAN_POINT('',(212.162097,-48.794379,1.585)); +#243362 = CIRCLE('',#243363,7.937542317998E-02); +#243363 = AXIS2_PLACEMENT_3D('',#243364,#243365,#243366); +#243364 = CARTESIAN_POINT('',(212.228095,-48.838478,1.585)); +#243365 = DIRECTION('',(0.,0.,-1.)); +#243366 = DIRECTION('',(0.555574990763,-0.83146643326,0.)); +#243367 = ORIENTED_EDGE('',*,*,#243368,.T.); +#243368 = EDGE_CURVE('',#243360,#243218,#243369,.T.); +#243369 = LINE('',#243370,#243371); +#243370 = CARTESIAN_POINT('',(212.162097,-48.794379,1.585)); +#243371 = VECTOR('',#243372,1.); +#243372 = DIRECTION('',(0.71188207692,0.702299016488,0.)); +#243373 = PLANE('',#243374); +#243374 = AXIS2_PLACEMENT_3D('',#243375,#243376,#243377); +#243375 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243376 = DIRECTION('',(0.,0.,1.)); +#243377 = DIRECTION('',(1.,0.,-0.)); +#243378 = SHELL_BASED_SURFACE_MODEL('',(#243379)); +#243379 = OPEN_SHELL('',(#243380)); +#243380 = ADVANCED_FACE('',(#243381),#243517,.T.); +#243381 = FACE_BOUND('',#243382,.F.); +#243382 = EDGE_LOOP('',(#243383,#243393,#243402,#243410,#243419,#243427, + #243435,#243444,#243452,#243460,#243469,#243477,#243486,#243494, + #243502,#243511)); +#243383 = ORIENTED_EDGE('',*,*,#243384,.T.); +#243384 = EDGE_CURVE('',#243385,#243387,#243389,.T.); +#243385 = VERTEX_POINT('',#243386); +#243386 = CARTESIAN_POINT('',(177.800028,-49.537039,1.585)); +#243387 = VERTEX_POINT('',#243388); +#243388 = CARTESIAN_POINT('',(177.798806,-49.761957,1.585)); +#243389 = LINE('',#243390,#243391); +#243390 = CARTESIAN_POINT('',(177.800028,-49.537039,1.585)); +#243391 = VECTOR('',#243392,1.); +#243392 = DIRECTION('',(-5.433010984414E-03,-0.999985241087,0.)); +#243393 = ORIENTED_EDGE('',*,*,#243394,.T.); +#243394 = EDGE_CURVE('',#243387,#243395,#243397,.T.); +#243395 = VERTEX_POINT('',#243396); +#243396 = CARTESIAN_POINT('',(177.550624,-50.006182,1.585)); +#243397 = CIRCLE('',#243398,0.348632713765); +#243398 = AXIS2_PLACEMENT_3D('',#243399,#243400,#243401); +#243399 = CARTESIAN_POINT('',(177.46285597394,-49.66877787627,1.585)); +#243400 = DIRECTION('',(0.,0.,-1.)); +#243401 = DIRECTION('',(0.963621636162,-0.267270167283,0.)); +#243402 = ORIENTED_EDGE('',*,*,#243403,.T.); +#243403 = EDGE_CURVE('',#243395,#243404,#243406,.T.); +#243404 = VERTEX_POINT('',#243405); +#243405 = CARTESIAN_POINT('',(177.230468,-50.00496,1.585)); +#243406 = LINE('',#243407,#243408); +#243407 = CARTESIAN_POINT('',(177.550624,-50.006182,1.585)); +#243408 = VECTOR('',#243409,1.); +#243409 = DIRECTION('',(-0.999992715758,3.816861463354E-03,0.)); +#243410 = ORIENTED_EDGE('',*,*,#243411,.T.); +#243411 = EDGE_CURVE('',#243404,#243412,#243414,.T.); +#243412 = VERTEX_POINT('',#243413); +#243413 = CARTESIAN_POINT('',(176.986243,-49.756779,1.585)); +#243414 = CIRCLE('',#243415,0.348628078749); +#243415 = AXIS2_PLACEMENT_3D('',#243416,#243417,#243418); +#243416 = CARTESIAN_POINT('',(177.3236430302,-49.66901364857,1.585)); +#243417 = DIRECTION('',(0.,0.,-1.)); +#243418 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#243419 = ORIENTED_EDGE('',*,*,#243420,.T.); +#243420 = EDGE_CURVE('',#243412,#243421,#243423,.T.); +#243421 = VERTEX_POINT('',#243422); +#243422 = CARTESIAN_POINT('',(176.987465,-49.531862,1.585)); +#243423 = LINE('',#243424,#243425); +#243424 = CARTESIAN_POINT('',(176.986243,-49.756779,1.585)); +#243425 = VECTOR('',#243426,1.); +#243426 = DIRECTION('',(5.433035139327E-03,0.999985240956,0.)); +#243427 = ORIENTED_EDGE('',*,*,#243428,.T.); +#243428 = EDGE_CURVE('',#243421,#243429,#243431,.T.); +#243429 = VERTEX_POINT('',#243430); +#243430 = CARTESIAN_POINT('',(177.048171,-49.410449,1.585)); +#243431 = LINE('',#243432,#243433); +#243432 = CARTESIAN_POINT('',(176.987465,-49.531862,1.585)); +#243433 = VECTOR('',#243434,1.); +#243434 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#243435 = ORIENTED_EDGE('',*,*,#243436,.T.); +#243436 = EDGE_CURVE('',#243429,#243437,#243439,.T.); +#243437 = VERTEX_POINT('',#243438); +#243438 = CARTESIAN_POINT('',(177.174503,-49.489974,1.585)); +#243439 = CIRCLE('',#243440,7.500029440362E-02); +#243440 = AXIS2_PLACEMENT_3D('',#243441,#243442,#243443); +#243441 = CARTESIAN_POINT('',(177.10742064867,-49.45643294602,1.585)); +#243442 = DIRECTION('',(0.,0.,-1.)); +#243443 = DIRECTION('',(-0.789992214662,0.613116873665,0.)); +#243444 = ORIENTED_EDGE('',*,*,#243445,.T.); +#243445 = EDGE_CURVE('',#243437,#243446,#243448,.T.); +#243446 = VERTEX_POINT('',#243447); +#243447 = CARTESIAN_POINT('',(177.134802,-49.569376,1.585)); +#243448 = LINE('',#243449,#243450); +#243449 = CARTESIAN_POINT('',(177.174503,-49.489974,1.585)); +#243450 = VECTOR('',#243451,1.); +#243451 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#243452 = ORIENTED_EDGE('',*,*,#243453,.T.); +#243453 = EDGE_CURVE('',#243446,#243454,#243456,.T.); +#243454 = VERTEX_POINT('',#243455); +#243455 = CARTESIAN_POINT('',(177.134802,-49.724442,1.585)); +#243456 = LINE('',#243457,#243458); +#243457 = CARTESIAN_POINT('',(177.134802,-49.569376,1.585)); +#243458 = VECTOR('',#243459,1.); +#243459 = DIRECTION('',(0.,-1.,0.)); +#243460 = ORIENTED_EDGE('',*,*,#243461,.T.); +#243461 = EDGE_CURVE('',#243454,#243462,#243464,.T.); +#243462 = VERTEX_POINT('',#243463); +#243463 = CARTESIAN_POINT('',(177.267983,-49.857623,1.585)); +#243464 = CIRCLE('',#243465,0.18686440374); +#243465 = AXIS2_PLACEMENT_3D('',#243466,#243467,#243468); +#243466 = CARTESIAN_POINT('',(177.315519,-49.676906,1.585)); +#243467 = DIRECTION('',(0.,0.,1.)); +#243468 = DIRECTION('',(-0.967102328658,-0.254387668538,0.)); +#243469 = ORIENTED_EDGE('',*,*,#243470,.T.); +#243470 = EDGE_CURVE('',#243462,#243471,#243473,.T.); +#243471 = VERTEX_POINT('',#243472); +#243472 = CARTESIAN_POINT('',(177.518287,-49.857623,1.585)); +#243473 = LINE('',#243474,#243475); +#243474 = CARTESIAN_POINT('',(177.267983,-49.857623,1.585)); +#243475 = VECTOR('',#243476,1.); +#243476 = DIRECTION('',(1.,0.,0.)); +#243477 = ORIENTED_EDGE('',*,*,#243478,.T.); +#243478 = EDGE_CURVE('',#243471,#243479,#243481,.T.); +#243479 = VERTEX_POINT('',#243480); +#243480 = CARTESIAN_POINT('',(177.651469,-49.724442,1.585)); +#243481 = CIRCLE('',#243482,0.186872595955); +#243482 = AXIS2_PLACEMENT_3D('',#243483,#243484,#243485); +#243483 = CARTESIAN_POINT('',(177.47074536766,-49.67689901068,1.585)); +#243484 = DIRECTION('',(0.,0.,1.)); +#243485 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#243486 = ORIENTED_EDGE('',*,*,#243487,.T.); +#243487 = EDGE_CURVE('',#243479,#243488,#243490,.T.); +#243488 = VERTEX_POINT('',#243489); +#243489 = CARTESIAN_POINT('',(177.651469,-49.569376,1.585)); +#243490 = LINE('',#243491,#243492); +#243491 = CARTESIAN_POINT('',(177.651469,-49.724442,1.585)); +#243492 = VECTOR('',#243493,1.); +#243493 = DIRECTION('',(0.,1.,0.)); +#243494 = ORIENTED_EDGE('',*,*,#243495,.T.); +#243495 = EDGE_CURVE('',#243488,#243496,#243498,.T.); +#243496 = VERTEX_POINT('',#243497); +#243497 = CARTESIAN_POINT('',(177.606513,-49.476242,1.585)); +#243498 = LINE('',#243499,#243500); +#243499 = CARTESIAN_POINT('',(177.651469,-49.569376,1.585)); +#243500 = VECTOR('',#243501,1.); +#243501 = DIRECTION('',(-0.43470796245,0.90057147822,0.)); +#243502 = ORIENTED_EDGE('',*,*,#243503,.T.); +#243503 = EDGE_CURVE('',#243496,#243504,#243506,.T.); +#243504 = VERTEX_POINT('',#243505); +#243505 = CARTESIAN_POINT('',(177.745932,-49.422892,1.585)); +#243506 = CIRCLE('',#243507,7.500016685596E-02); +#243507 = AXIS2_PLACEMENT_3D('',#243508,#243509,#243510); +#243508 = CARTESIAN_POINT('',(177.6788500864,-49.45643364422,1.585)); +#243509 = DIRECTION('',(0.,0.,-1.)); +#243510 = DIRECTION('',(-0.964492339665,-0.264110822815,-0.)); +#243511 = ORIENTED_EDGE('',*,*,#243512,.T.); +#243512 = EDGE_CURVE('',#243504,#243385,#243513,.T.); +#243513 = LINE('',#243514,#243515); +#243514 = CARTESIAN_POINT('',(177.745932,-49.422892,1.585)); +#243515 = VECTOR('',#243516,1.); +#243516 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#243517 = PLANE('',#243518); +#243518 = AXIS2_PLACEMENT_3D('',#243519,#243520,#243521); +#243519 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243520 = DIRECTION('',(0.,0.,1.)); +#243521 = DIRECTION('',(1.,0.,-0.)); +#243522 = SHELL_BASED_SURFACE_MODEL('',(#243523)); +#243523 = OPEN_SHELL('',(#243524)); +#243524 = ADVANCED_FACE('',(#243525,#243595,#243679,#243863,#243897, + #243931),#243965,.T.); +#243525 = FACE_BOUND('',#243526,.F.); +#243526 = EDGE_LOOP('',(#243527,#243538,#243546,#243555,#243563,#243572, + #243580,#243589)); +#243527 = ORIENTED_EDGE('',*,*,#243528,.T.); +#243528 = EDGE_CURVE('',#243529,#243531,#243533,.T.); +#243529 = VERTEX_POINT('',#243530); +#243530 = CARTESIAN_POINT('',(95.57165,-43.8631,1.585)); +#243531 = VERTEX_POINT('',#243532); +#243532 = CARTESIAN_POINT('',(95.63165,-43.8031,1.585)); +#243533 = CIRCLE('',#243534,5.999932016257E-02); +#243534 = AXIS2_PLACEMENT_3D('',#243535,#243536,#243537); +#243535 = CARTESIAN_POINT('',(95.631649320159,-43.86309932015,1.585)); +#243536 = DIRECTION('',(0.,0.,-1.)); +#243537 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#243538 = ORIENTED_EDGE('',*,*,#243539,.T.); +#243539 = EDGE_CURVE('',#243531,#243540,#243542,.T.); +#243540 = VERTEX_POINT('',#243541); +#243541 = CARTESIAN_POINT('',(108.25165,-43.8031,1.585)); +#243542 = LINE('',#243543,#243544); +#243543 = CARTESIAN_POINT('',(95.63165,-43.8031,1.585)); +#243544 = VECTOR('',#243545,1.); +#243545 = DIRECTION('',(1.,0.,0.)); +#243546 = ORIENTED_EDGE('',*,*,#243547,.T.); +#243547 = EDGE_CURVE('',#243540,#243548,#243550,.T.); +#243548 = VERTEX_POINT('',#243549); +#243549 = CARTESIAN_POINT('',(108.31165,-43.8631,1.585)); +#243550 = CIRCLE('',#243551,5.999932016262E-02); +#243551 = AXIS2_PLACEMENT_3D('',#243552,#243553,#243554); +#243552 = CARTESIAN_POINT('',(108.25165067984,-43.86309932015,1.585)); +#243553 = DIRECTION('',(0.,0.,-1.)); +#243554 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#243555 = ORIENTED_EDGE('',*,*,#243556,.T.); +#243556 = EDGE_CURVE('',#243548,#243557,#243559,.T.); +#243557 = VERTEX_POINT('',#243558); +#243558 = CARTESIAN_POINT('',(108.31165,-49.8331,1.585)); +#243559 = LINE('',#243560,#243561); +#243560 = CARTESIAN_POINT('',(108.31165,-43.8631,1.585)); +#243561 = VECTOR('',#243562,1.); +#243562 = DIRECTION('',(0.,-1.,0.)); +#243563 = ORIENTED_EDGE('',*,*,#243564,.T.); +#243564 = EDGE_CURVE('',#243557,#243565,#243567,.T.); +#243565 = VERTEX_POINT('',#243566); +#243566 = CARTESIAN_POINT('',(108.25165,-49.8931,1.585)); +#243567 = CIRCLE('',#243568,5.999932016258E-02); +#243568 = AXIS2_PLACEMENT_3D('',#243569,#243570,#243571); +#243569 = CARTESIAN_POINT('',(108.25165067984,-49.83310067984,1.585)); +#243570 = DIRECTION('',(0.,0.,-1.)); +#243571 = DIRECTION('',(0.999999999936,1.133081612143E-05,0.)); +#243572 = ORIENTED_EDGE('',*,*,#243573,.T.); +#243573 = EDGE_CURVE('',#243565,#243574,#243576,.T.); +#243574 = VERTEX_POINT('',#243575); +#243575 = CARTESIAN_POINT('',(95.63165,-49.8931,1.585)); +#243576 = LINE('',#243577,#243578); +#243577 = CARTESIAN_POINT('',(108.25165,-49.8931,1.585)); +#243578 = VECTOR('',#243579,1.); +#243579 = DIRECTION('',(-1.,0.,0.)); +#243580 = ORIENTED_EDGE('',*,*,#243581,.T.); +#243581 = EDGE_CURVE('',#243574,#243582,#243584,.T.); +#243582 = VERTEX_POINT('',#243583); +#243583 = CARTESIAN_POINT('',(95.57165,-49.8331,1.585)); +#243584 = CIRCLE('',#243585,5.999932016258E-02); +#243585 = AXIS2_PLACEMENT_3D('',#243586,#243587,#243588); +#243586 = CARTESIAN_POINT('',(95.631649320159,-49.83310067984,1.585)); +#243587 = DIRECTION('',(0.,0.,-1.)); +#243588 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#243589 = ORIENTED_EDGE('',*,*,#243590,.T.); +#243590 = EDGE_CURVE('',#243582,#243529,#243591,.T.); +#243591 = LINE('',#243592,#243593); +#243592 = CARTESIAN_POINT('',(95.57165,-49.8331,1.585)); +#243593 = VECTOR('',#243594,1.); +#243594 = DIRECTION('',(0.,1.,0.)); +#243595 = FACE_BOUND('',#243596,.F.); +#243596 = EDGE_LOOP('',(#243597,#243608,#243616,#243624,#243632,#243640, + #243648,#243656,#243664,#243673)); +#243597 = ORIENTED_EDGE('',*,*,#243598,.T.); +#243598 = EDGE_CURVE('',#243599,#243601,#243603,.T.); +#243599 = VERTEX_POINT('',#243600); +#243600 = CARTESIAN_POINT('',(96.39165,-49.1331,1.585)); +#243601 = VERTEX_POINT('',#243602); +#243602 = CARTESIAN_POINT('',(96.33165,-49.0731,1.585)); +#243603 = CIRCLE('',#243604,5.999932016261E-02); +#243604 = AXIS2_PLACEMENT_3D('',#243605,#243606,#243607); +#243605 = CARTESIAN_POINT('',(96.391649320159,-49.07310067984,1.585)); +#243606 = DIRECTION('',(0.,0.,-1.)); +#243607 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#243608 = ORIENTED_EDGE('',*,*,#243609,.T.); +#243609 = EDGE_CURVE('',#243601,#243610,#243612,.T.); +#243610 = VERTEX_POINT('',#243611); +#243611 = CARTESIAN_POINT('',(96.33165,-46.1831,1.585)); +#243612 = LINE('',#243613,#243614); +#243613 = CARTESIAN_POINT('',(96.33165,-49.0731,1.585)); +#243614 = VECTOR('',#243615,1.); +#243615 = DIRECTION('',(0.,1.,0.)); +#243616 = ORIENTED_EDGE('',*,*,#243617,.T.); +#243617 = EDGE_CURVE('',#243610,#243618,#243620,.T.); +#243618 = VERTEX_POINT('',#243619); +#243619 = CARTESIAN_POINT('',(95.69165,-46.1831,1.585)); +#243620 = LINE('',#243621,#243622); +#243621 = CARTESIAN_POINT('',(96.33165,-46.1831,1.585)); +#243622 = VECTOR('',#243623,1.); +#243623 = DIRECTION('',(-1.,0.,0.)); +#243624 = ORIENTED_EDGE('',*,*,#243625,.T.); +#243625 = EDGE_CURVE('',#243618,#243626,#243628,.T.); +#243626 = VERTEX_POINT('',#243627); +#243627 = CARTESIAN_POINT('',(95.69165,-49.7731,1.585)); +#243628 = LINE('',#243629,#243630); +#243629 = CARTESIAN_POINT('',(95.69165,-46.1831,1.585)); +#243630 = VECTOR('',#243631,1.); +#243631 = DIRECTION('',(0.,-1.,0.)); +#243632 = ORIENTED_EDGE('',*,*,#243633,.T.); +#243633 = EDGE_CURVE('',#243626,#243634,#243636,.T.); +#243634 = VERTEX_POINT('',#243635); +#243635 = CARTESIAN_POINT('',(108.19165,-49.7731,1.585)); +#243636 = LINE('',#243637,#243638); +#243637 = CARTESIAN_POINT('',(95.69165,-49.7731,1.585)); +#243638 = VECTOR('',#243639,1.); +#243639 = DIRECTION('',(1.,0.,0.)); +#243640 = ORIENTED_EDGE('',*,*,#243641,.T.); +#243641 = EDGE_CURVE('',#243634,#243642,#243644,.T.); +#243642 = VERTEX_POINT('',#243643); +#243643 = CARTESIAN_POINT('',(108.19165,-46.1831,1.585)); +#243644 = LINE('',#243645,#243646); +#243645 = CARTESIAN_POINT('',(108.19165,-49.7731,1.585)); +#243646 = VECTOR('',#243647,1.); +#243647 = DIRECTION('',(0.,1.,0.)); +#243648 = ORIENTED_EDGE('',*,*,#243649,.T.); +#243649 = EDGE_CURVE('',#243642,#243650,#243652,.T.); +#243650 = VERTEX_POINT('',#243651); +#243651 = CARTESIAN_POINT('',(107.55165,-46.1831,1.585)); +#243652 = LINE('',#243653,#243654); +#243653 = CARTESIAN_POINT('',(108.19165,-46.1831,1.585)); +#243654 = VECTOR('',#243655,1.); +#243655 = DIRECTION('',(-1.,0.,0.)); +#243656 = ORIENTED_EDGE('',*,*,#243657,.T.); +#243657 = EDGE_CURVE('',#243650,#243658,#243660,.T.); +#243658 = VERTEX_POINT('',#243659); +#243659 = CARTESIAN_POINT('',(107.55165,-49.0731,1.585)); +#243660 = LINE('',#243661,#243662); +#243661 = CARTESIAN_POINT('',(107.55165,-46.1831,1.585)); +#243662 = VECTOR('',#243663,1.); +#243663 = DIRECTION('',(0.,-1.,0.)); +#243664 = ORIENTED_EDGE('',*,*,#243665,.T.); +#243665 = EDGE_CURVE('',#243658,#243666,#243668,.T.); +#243666 = VERTEX_POINT('',#243667); +#243667 = CARTESIAN_POINT('',(107.49165,-49.1331,1.585)); +#243668 = CIRCLE('',#243669,5.999932016257E-02); +#243669 = AXIS2_PLACEMENT_3D('',#243670,#243671,#243672); +#243670 = CARTESIAN_POINT('',(107.49165067984,-49.07310067984,1.585)); +#243671 = DIRECTION('',(0.,0.,-1.)); +#243672 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#243673 = ORIENTED_EDGE('',*,*,#243674,.T.); +#243674 = EDGE_CURVE('',#243666,#243599,#243675,.T.); +#243675 = LINE('',#243676,#243677); +#243676 = CARTESIAN_POINT('',(107.49165,-49.1331,1.585)); +#243677 = VECTOR('',#243678,1.); +#243678 = DIRECTION('',(-1.,0.,0.)); +#243679 = FACE_BOUND('',#243680,.F.); +#243680 = EDGE_LOOP('',(#243681,#243692,#243700,#243708,#243716,#243725, + #243733,#243741,#243749,#243758,#243766,#243774,#243782,#243791, + #243799,#243807,#243815,#243824,#243832,#243840,#243848,#243857)); +#243681 = ORIENTED_EDGE('',*,*,#243682,.T.); +#243682 = EDGE_CURVE('',#243683,#243685,#243687,.T.); +#243683 = VERTEX_POINT('',#243684); +#243684 = CARTESIAN_POINT('',(98.94165,-44.6831,1.585)); +#243685 = VERTEX_POINT('',#243686); +#243686 = CARTESIAN_POINT('',(98.88165,-44.6231,1.585)); +#243687 = CIRCLE('',#243688,5.999932016261E-02); +#243688 = AXIS2_PLACEMENT_3D('',#243689,#243690,#243691); +#243689 = CARTESIAN_POINT('',(98.941649320159,-44.62310067984,1.585)); +#243690 = DIRECTION('',(0.,0.,-1.)); +#243691 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#243692 = ORIENTED_EDGE('',*,*,#243693,.T.); +#243693 = EDGE_CURVE('',#243685,#243694,#243696,.T.); +#243694 = VERTEX_POINT('',#243695); +#243695 = CARTESIAN_POINT('',(98.88165,-43.9231,1.585)); +#243696 = LINE('',#243697,#243698); +#243697 = CARTESIAN_POINT('',(98.88165,-44.6231,1.585)); +#243698 = VECTOR('',#243699,1.); +#243699 = DIRECTION('',(0.,1.,0.)); +#243700 = ORIENTED_EDGE('',*,*,#243701,.T.); +#243701 = EDGE_CURVE('',#243694,#243702,#243704,.T.); +#243702 = VERTEX_POINT('',#243703); +#243703 = CARTESIAN_POINT('',(97.50165,-43.9231,1.585)); +#243704 = LINE('',#243705,#243706); +#243705 = CARTESIAN_POINT('',(98.88165,-43.9231,1.585)); +#243706 = VECTOR('',#243707,1.); +#243707 = DIRECTION('',(-1.,0.,0.)); +#243708 = ORIENTED_EDGE('',*,*,#243709,.T.); +#243709 = EDGE_CURVE('',#243702,#243710,#243712,.T.); +#243710 = VERTEX_POINT('',#243711); +#243711 = CARTESIAN_POINT('',(97.50165,-44.6231,1.585)); +#243712 = LINE('',#243713,#243714); +#243713 = CARTESIAN_POINT('',(97.50165,-43.9231,1.585)); +#243714 = VECTOR('',#243715,1.); +#243715 = DIRECTION('',(0.,-1.,0.)); +#243716 = ORIENTED_EDGE('',*,*,#243717,.T.); +#243717 = EDGE_CURVE('',#243710,#243718,#243720,.T.); +#243718 = VERTEX_POINT('',#243719); +#243719 = CARTESIAN_POINT('',(97.44165,-44.6831,1.585)); +#243720 = CIRCLE('',#243721,5.999932016258E-02); +#243721 = AXIS2_PLACEMENT_3D('',#243722,#243723,#243724); +#243722 = CARTESIAN_POINT('',(97.441650679841,-44.62310067984,1.585)); +#243723 = DIRECTION('',(0.,0.,-1.)); +#243724 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#243725 = ORIENTED_EDGE('',*,*,#243726,.T.); +#243726 = EDGE_CURVE('',#243718,#243727,#243729,.T.); +#243727 = VERTEX_POINT('',#243728); +#243728 = CARTESIAN_POINT('',(95.69165,-44.6831,1.585)); +#243729 = LINE('',#243730,#243731); +#243730 = CARTESIAN_POINT('',(97.44165,-44.6831,1.585)); +#243731 = VECTOR('',#243732,1.); +#243732 = DIRECTION('',(-1.,0.,0.)); +#243733 = ORIENTED_EDGE('',*,*,#243734,.T.); +#243734 = EDGE_CURVE('',#243727,#243735,#243737,.T.); +#243735 = VERTEX_POINT('',#243736); +#243736 = CARTESIAN_POINT('',(95.69165,-46.0631,1.585)); +#243737 = LINE('',#243738,#243739); +#243738 = CARTESIAN_POINT('',(95.69165,-44.6831,1.585)); +#243739 = VECTOR('',#243740,1.); +#243740 = DIRECTION('',(0.,-1.,0.)); +#243741 = ORIENTED_EDGE('',*,*,#243742,.T.); +#243742 = EDGE_CURVE('',#243735,#243743,#243745,.T.); +#243743 = VERTEX_POINT('',#243744); +#243744 = CARTESIAN_POINT('',(96.39165,-46.0631,1.585)); +#243745 = LINE('',#243746,#243747); +#243746 = CARTESIAN_POINT('',(95.69165,-46.0631,1.585)); +#243747 = VECTOR('',#243748,1.); +#243748 = DIRECTION('',(1.,0.,0.)); +#243749 = ORIENTED_EDGE('',*,*,#243750,.T.); +#243750 = EDGE_CURVE('',#243743,#243751,#243753,.T.); +#243751 = VERTEX_POINT('',#243752); +#243752 = CARTESIAN_POINT('',(96.45165,-46.1231,1.585)); +#243753 = CIRCLE('',#243754,5.999932016261E-02); +#243754 = AXIS2_PLACEMENT_3D('',#243755,#243756,#243757); +#243755 = CARTESIAN_POINT('',(96.391650679841,-46.12309932015,1.585)); +#243756 = DIRECTION('',(0.,0.,-1.)); +#243757 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#243758 = ORIENTED_EDGE('',*,*,#243759,.T.); +#243759 = EDGE_CURVE('',#243751,#243760,#243762,.T.); +#243760 = VERTEX_POINT('',#243761); +#243761 = CARTESIAN_POINT('',(96.45165,-49.0131,1.585)); +#243762 = LINE('',#243763,#243764); +#243763 = CARTESIAN_POINT('',(96.45165,-46.1231,1.585)); +#243764 = VECTOR('',#243765,1.); +#243765 = DIRECTION('',(0.,-1.,0.)); +#243766 = ORIENTED_EDGE('',*,*,#243767,.T.); +#243767 = EDGE_CURVE('',#243760,#243768,#243770,.T.); +#243768 = VERTEX_POINT('',#243769); +#243769 = CARTESIAN_POINT('',(107.43165,-49.0131,1.585)); +#243770 = LINE('',#243771,#243772); +#243771 = CARTESIAN_POINT('',(96.45165,-49.0131,1.585)); +#243772 = VECTOR('',#243773,1.); +#243773 = DIRECTION('',(1.,0.,0.)); +#243774 = ORIENTED_EDGE('',*,*,#243775,.T.); +#243775 = EDGE_CURVE('',#243768,#243776,#243778,.T.); +#243776 = VERTEX_POINT('',#243777); +#243777 = CARTESIAN_POINT('',(107.43165,-46.1231,1.585)); +#243778 = LINE('',#243779,#243780); +#243779 = CARTESIAN_POINT('',(107.43165,-49.0131,1.585)); +#243780 = VECTOR('',#243781,1.); +#243781 = DIRECTION('',(0.,1.,0.)); +#243782 = ORIENTED_EDGE('',*,*,#243783,.T.); +#243783 = EDGE_CURVE('',#243776,#243784,#243786,.T.); +#243784 = VERTEX_POINT('',#243785); +#243785 = CARTESIAN_POINT('',(107.49165,-46.0631,1.585)); +#243786 = CIRCLE('',#243787,5.999932016258E-02); +#243787 = AXIS2_PLACEMENT_3D('',#243788,#243789,#243790); +#243788 = CARTESIAN_POINT('',(107.49164932015,-46.12309932015,1.585)); +#243789 = DIRECTION('',(0.,0.,-1.)); +#243790 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#243791 = ORIENTED_EDGE('',*,*,#243792,.T.); +#243792 = EDGE_CURVE('',#243784,#243793,#243795,.T.); +#243793 = VERTEX_POINT('',#243794); +#243794 = CARTESIAN_POINT('',(108.19165,-46.0631,1.585)); +#243795 = LINE('',#243796,#243797); +#243796 = CARTESIAN_POINT('',(107.49165,-46.0631,1.585)); +#243797 = VECTOR('',#243798,1.); +#243798 = DIRECTION('',(1.,0.,0.)); +#243799 = ORIENTED_EDGE('',*,*,#243800,.T.); +#243800 = EDGE_CURVE('',#243793,#243801,#243803,.T.); +#243801 = VERTEX_POINT('',#243802); +#243802 = CARTESIAN_POINT('',(108.19165,-44.6831,1.585)); +#243803 = LINE('',#243804,#243805); +#243804 = CARTESIAN_POINT('',(108.19165,-46.0631,1.585)); +#243805 = VECTOR('',#243806,1.); +#243806 = DIRECTION('',(0.,1.,0.)); +#243807 = ORIENTED_EDGE('',*,*,#243808,.T.); +#243808 = EDGE_CURVE('',#243801,#243809,#243811,.T.); +#243809 = VERTEX_POINT('',#243810); +#243810 = CARTESIAN_POINT('',(106.44165,-44.6831,1.585)); +#243811 = LINE('',#243812,#243813); +#243812 = CARTESIAN_POINT('',(108.19165,-44.6831,1.585)); +#243813 = VECTOR('',#243814,1.); +#243814 = DIRECTION('',(-1.,0.,0.)); +#243815 = ORIENTED_EDGE('',*,*,#243816,.T.); +#243816 = EDGE_CURVE('',#243809,#243817,#243819,.T.); +#243817 = VERTEX_POINT('',#243818); +#243818 = CARTESIAN_POINT('',(106.38165,-44.6231,1.585)); +#243819 = CIRCLE('',#243820,5.999932016261E-02); +#243820 = AXIS2_PLACEMENT_3D('',#243821,#243822,#243823); +#243821 = CARTESIAN_POINT('',(106.44164932015,-44.62310067984,1.585)); +#243822 = DIRECTION('',(0.,0.,-1.)); +#243823 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#243824 = ORIENTED_EDGE('',*,*,#243825,.T.); +#243825 = EDGE_CURVE('',#243817,#243826,#243828,.T.); +#243826 = VERTEX_POINT('',#243827); +#243827 = CARTESIAN_POINT('',(106.38165,-43.9231,1.585)); +#243828 = LINE('',#243829,#243830); +#243829 = CARTESIAN_POINT('',(106.38165,-44.6231,1.585)); +#243830 = VECTOR('',#243831,1.); +#243831 = DIRECTION('',(0.,1.,0.)); +#243832 = ORIENTED_EDGE('',*,*,#243833,.T.); +#243833 = EDGE_CURVE('',#243826,#243834,#243836,.T.); +#243834 = VERTEX_POINT('',#243835); +#243835 = CARTESIAN_POINT('',(105.00165,-43.9231,1.585)); +#243836 = LINE('',#243837,#243838); +#243837 = CARTESIAN_POINT('',(106.38165,-43.9231,1.585)); +#243838 = VECTOR('',#243839,1.); +#243839 = DIRECTION('',(-1.,0.,0.)); +#243840 = ORIENTED_EDGE('',*,*,#243841,.T.); +#243841 = EDGE_CURVE('',#243834,#243842,#243844,.T.); +#243842 = VERTEX_POINT('',#243843); +#243843 = CARTESIAN_POINT('',(105.00165,-44.6231,1.585)); +#243844 = LINE('',#243845,#243846); +#243845 = CARTESIAN_POINT('',(105.00165,-43.9231,1.585)); +#243846 = VECTOR('',#243847,1.); +#243847 = DIRECTION('',(0.,-1.,0.)); +#243848 = ORIENTED_EDGE('',*,*,#243849,.T.); +#243849 = EDGE_CURVE('',#243842,#243850,#243852,.T.); +#243850 = VERTEX_POINT('',#243851); +#243851 = CARTESIAN_POINT('',(104.94165,-44.6831,1.585)); +#243852 = CIRCLE('',#243853,5.999932016258E-02); +#243853 = AXIS2_PLACEMENT_3D('',#243854,#243855,#243856); +#243854 = CARTESIAN_POINT('',(104.94165067984,-44.62310067984,1.585)); +#243855 = DIRECTION('',(0.,0.,-1.)); +#243856 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#243857 = ORIENTED_EDGE('',*,*,#243858,.T.); +#243858 = EDGE_CURVE('',#243850,#243683,#243859,.T.); +#243859 = LINE('',#243860,#243861); +#243860 = CARTESIAN_POINT('',(104.94165,-44.6831,1.585)); +#243861 = VECTOR('',#243862,1.); +#243862 = DIRECTION('',(-1.,0.,0.)); +#243863 = FACE_BOUND('',#243864,.F.); +#243864 = EDGE_LOOP('',(#243865,#243875,#243883,#243891)); +#243865 = ORIENTED_EDGE('',*,*,#243866,.T.); +#243866 = EDGE_CURVE('',#243867,#243869,#243871,.T.); +#243867 = VERTEX_POINT('',#243868); +#243868 = CARTESIAN_POINT('',(97.38165,-44.5631,1.585)); +#243869 = VERTEX_POINT('',#243870); +#243870 = CARTESIAN_POINT('',(97.38165,-43.9331,1.585)); +#243871 = LINE('',#243872,#243873); +#243872 = CARTESIAN_POINT('',(97.38165,-44.5631,1.585)); +#243873 = VECTOR('',#243874,1.); +#243874 = DIRECTION('',(0.,1.,0.)); +#243875 = ORIENTED_EDGE('',*,*,#243876,.T.); +#243876 = EDGE_CURVE('',#243869,#243877,#243879,.T.); +#243877 = VERTEX_POINT('',#243878); +#243878 = CARTESIAN_POINT('',(95.70165,-43.9331,1.585)); +#243879 = LINE('',#243880,#243881); +#243880 = CARTESIAN_POINT('',(97.38165,-43.9331,1.585)); +#243881 = VECTOR('',#243882,1.); +#243882 = DIRECTION('',(-1.,0.,0.)); +#243883 = ORIENTED_EDGE('',*,*,#243884,.T.); +#243884 = EDGE_CURVE('',#243877,#243885,#243887,.T.); +#243885 = VERTEX_POINT('',#243886); +#243886 = CARTESIAN_POINT('',(95.70165,-44.5631,1.585)); +#243887 = LINE('',#243888,#243889); +#243888 = CARTESIAN_POINT('',(95.70165,-43.9331,1.585)); +#243889 = VECTOR('',#243890,1.); +#243890 = DIRECTION('',(0.,-1.,0.)); +#243891 = ORIENTED_EDGE('',*,*,#243892,.T.); +#243892 = EDGE_CURVE('',#243885,#243867,#243893,.T.); +#243893 = LINE('',#243894,#243895); +#243894 = CARTESIAN_POINT('',(95.70165,-44.5631,1.585)); +#243895 = VECTOR('',#243896,1.); +#243896 = DIRECTION('',(1.,0.,0.)); +#243897 = FACE_BOUND('',#243898,.F.); +#243898 = EDGE_LOOP('',(#243899,#243909,#243917,#243925)); +#243899 = ORIENTED_EDGE('',*,*,#243900,.T.); +#243900 = EDGE_CURVE('',#243901,#243903,#243905,.T.); +#243901 = VERTEX_POINT('',#243902); +#243902 = CARTESIAN_POINT('',(104.88165,-44.5631,1.585)); +#243903 = VERTEX_POINT('',#243904); +#243904 = CARTESIAN_POINT('',(104.88165,-43.9331,1.585)); +#243905 = LINE('',#243906,#243907); +#243906 = CARTESIAN_POINT('',(104.88165,-44.5631,1.585)); +#243907 = VECTOR('',#243908,1.); +#243908 = DIRECTION('',(0.,1.,0.)); +#243909 = ORIENTED_EDGE('',*,*,#243910,.T.); +#243910 = EDGE_CURVE('',#243903,#243911,#243913,.T.); +#243911 = VERTEX_POINT('',#243912); +#243912 = CARTESIAN_POINT('',(99.00165,-43.9331,1.585)); +#243913 = LINE('',#243914,#243915); +#243914 = CARTESIAN_POINT('',(104.88165,-43.9331,1.585)); +#243915 = VECTOR('',#243916,1.); +#243916 = DIRECTION('',(-1.,0.,0.)); +#243917 = ORIENTED_EDGE('',*,*,#243918,.T.); +#243918 = EDGE_CURVE('',#243911,#243919,#243921,.T.); +#243919 = VERTEX_POINT('',#243920); +#243920 = CARTESIAN_POINT('',(99.00165,-44.5631,1.585)); +#243921 = LINE('',#243922,#243923); +#243922 = CARTESIAN_POINT('',(99.00165,-43.9331,1.585)); +#243923 = VECTOR('',#243924,1.); +#243924 = DIRECTION('',(0.,-1.,0.)); +#243925 = ORIENTED_EDGE('',*,*,#243926,.T.); +#243926 = EDGE_CURVE('',#243919,#243901,#243927,.T.); +#243927 = LINE('',#243928,#243929); +#243928 = CARTESIAN_POINT('',(99.00165,-44.5631,1.585)); +#243929 = VECTOR('',#243930,1.); +#243930 = DIRECTION('',(1.,0.,0.)); +#243931 = FACE_BOUND('',#243932,.F.); +#243932 = EDGE_LOOP('',(#243933,#243943,#243951,#243959)); +#243933 = ORIENTED_EDGE('',*,*,#243934,.T.); +#243934 = EDGE_CURVE('',#243935,#243937,#243939,.T.); +#243935 = VERTEX_POINT('',#243936); +#243936 = CARTESIAN_POINT('',(108.18165,-44.5631,1.585)); +#243937 = VERTEX_POINT('',#243938); +#243938 = CARTESIAN_POINT('',(108.18165,-43.9331,1.585)); +#243939 = LINE('',#243940,#243941); +#243940 = CARTESIAN_POINT('',(108.18165,-44.5631,1.585)); +#243941 = VECTOR('',#243942,1.); +#243942 = DIRECTION('',(0.,1.,0.)); +#243943 = ORIENTED_EDGE('',*,*,#243944,.T.); +#243944 = EDGE_CURVE('',#243937,#243945,#243947,.T.); +#243945 = VERTEX_POINT('',#243946); +#243946 = CARTESIAN_POINT('',(106.50165,-43.9331,1.585)); +#243947 = LINE('',#243948,#243949); +#243948 = CARTESIAN_POINT('',(108.18165,-43.9331,1.585)); +#243949 = VECTOR('',#243950,1.); +#243950 = DIRECTION('',(-1.,0.,0.)); +#243951 = ORIENTED_EDGE('',*,*,#243952,.T.); +#243952 = EDGE_CURVE('',#243945,#243953,#243955,.T.); +#243953 = VERTEX_POINT('',#243954); +#243954 = CARTESIAN_POINT('',(106.50165,-44.5631,1.585)); +#243955 = LINE('',#243956,#243957); +#243956 = CARTESIAN_POINT('',(106.50165,-43.9331,1.585)); +#243957 = VECTOR('',#243958,1.); +#243958 = DIRECTION('',(0.,-1.,0.)); +#243959 = ORIENTED_EDGE('',*,*,#243960,.T.); +#243960 = EDGE_CURVE('',#243953,#243935,#243961,.T.); +#243961 = LINE('',#243962,#243963); +#243962 = CARTESIAN_POINT('',(106.50165,-44.5631,1.585)); +#243963 = VECTOR('',#243964,1.); +#243964 = DIRECTION('',(1.,0.,0.)); +#243965 = PLANE('',#243966); +#243966 = AXIS2_PLACEMENT_3D('',#243967,#243968,#243969); +#243967 = CARTESIAN_POINT('',(0.,0.,1.585)); +#243968 = DIRECTION('',(0.,0.,1.)); +#243969 = DIRECTION('',(1.,0.,-0.)); +#243970 = SHELL_BASED_SURFACE_MODEL('',(#243971)); +#243971 = OPEN_SHELL('',(#243972)); +#243972 = ADVANCED_FACE('',(#243973,#244043,#244160,#244344,#244378, + #244412),#244446,.T.); +#243973 = FACE_BOUND('',#243974,.F.); +#243974 = EDGE_LOOP('',(#243975,#243986,#243994,#244003,#244011,#244020, + #244028,#244037)); +#243975 = ORIENTED_EDGE('',*,*,#243976,.T.); +#243976 = EDGE_CURVE('',#243977,#243979,#243981,.T.); +#243977 = VERTEX_POINT('',#243978); +#243978 = CARTESIAN_POINT('',(113.57165,-43.8631,1.585)); +#243979 = VERTEX_POINT('',#243980); +#243980 = CARTESIAN_POINT('',(113.63165,-43.8031,1.585)); +#243981 = CIRCLE('',#243982,5.999932016257E-02); +#243982 = AXIS2_PLACEMENT_3D('',#243983,#243984,#243985); +#243983 = CARTESIAN_POINT('',(113.63164932015,-43.86309932015,1.585)); +#243984 = DIRECTION('',(0.,0.,-1.)); +#243985 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#243986 = ORIENTED_EDGE('',*,*,#243987,.T.); +#243987 = EDGE_CURVE('',#243979,#243988,#243990,.T.); +#243988 = VERTEX_POINT('',#243989); +#243989 = CARTESIAN_POINT('',(123.75165,-43.8031,1.585)); +#243990 = LINE('',#243991,#243992); +#243991 = CARTESIAN_POINT('',(113.63165,-43.8031,1.585)); +#243992 = VECTOR('',#243993,1.); +#243993 = DIRECTION('',(1.,0.,0.)); +#243994 = ORIENTED_EDGE('',*,*,#243995,.T.); +#243995 = EDGE_CURVE('',#243988,#243996,#243998,.T.); +#243996 = VERTEX_POINT('',#243997); +#243997 = CARTESIAN_POINT('',(123.81165,-43.8631,1.585)); +#243998 = CIRCLE('',#243999,5.999932016262E-02); +#243999 = AXIS2_PLACEMENT_3D('',#244000,#244001,#244002); +#244000 = CARTESIAN_POINT('',(123.75165067984,-43.86309932015,1.585)); +#244001 = DIRECTION('',(0.,0.,-1.)); +#244002 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#244003 = ORIENTED_EDGE('',*,*,#244004,.T.); +#244004 = EDGE_CURVE('',#243996,#244005,#244007,.T.); +#244005 = VERTEX_POINT('',#244006); +#244006 = CARTESIAN_POINT('',(123.81165,-49.8331,1.585)); +#244007 = LINE('',#244008,#244009); +#244008 = CARTESIAN_POINT('',(123.81165,-43.8631,1.585)); +#244009 = VECTOR('',#244010,1.); +#244010 = DIRECTION('',(0.,-1.,0.)); +#244011 = ORIENTED_EDGE('',*,*,#244012,.T.); +#244012 = EDGE_CURVE('',#244005,#244013,#244015,.T.); +#244013 = VERTEX_POINT('',#244014); +#244014 = CARTESIAN_POINT('',(123.75165,-49.8931,1.585)); +#244015 = CIRCLE('',#244016,5.999932016258E-02); +#244016 = AXIS2_PLACEMENT_3D('',#244017,#244018,#244019); +#244017 = CARTESIAN_POINT('',(123.75165067984,-49.83310067984,1.585)); +#244018 = DIRECTION('',(0.,0.,-1.)); +#244019 = DIRECTION('',(0.999999999936,1.133081612143E-05,0.)); +#244020 = ORIENTED_EDGE('',*,*,#244021,.T.); +#244021 = EDGE_CURVE('',#244013,#244022,#244024,.T.); +#244022 = VERTEX_POINT('',#244023); +#244023 = CARTESIAN_POINT('',(113.63165,-49.8931,1.585)); +#244024 = LINE('',#244025,#244026); +#244025 = CARTESIAN_POINT('',(123.75165,-49.8931,1.585)); +#244026 = VECTOR('',#244027,1.); +#244027 = DIRECTION('',(-1.,0.,0.)); +#244028 = ORIENTED_EDGE('',*,*,#244029,.T.); +#244029 = EDGE_CURVE('',#244022,#244030,#244032,.T.); +#244030 = VERTEX_POINT('',#244031); +#244031 = CARTESIAN_POINT('',(113.57165,-49.8331,1.585)); +#244032 = CIRCLE('',#244033,5.999932016258E-02); +#244033 = AXIS2_PLACEMENT_3D('',#244034,#244035,#244036); +#244034 = CARTESIAN_POINT('',(113.63164932015,-49.83310067984,1.585)); +#244035 = DIRECTION('',(0.,0.,-1.)); +#244036 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#244037 = ORIENTED_EDGE('',*,*,#244038,.T.); +#244038 = EDGE_CURVE('',#244030,#243977,#244039,.T.); +#244039 = LINE('',#244040,#244041); +#244040 = CARTESIAN_POINT('',(113.57165,-49.8331,1.585)); +#244041 = VECTOR('',#244042,1.); +#244042 = DIRECTION('',(0.,1.,0.)); +#244043 = FACE_BOUND('',#244044,.F.); +#244044 = EDGE_LOOP('',(#244045,#244056,#244064,#244072,#244080,#244088, + #244096,#244104,#244113,#244121,#244129,#244137,#244145,#244154)); +#244045 = ORIENTED_EDGE('',*,*,#244046,.T.); +#244046 = EDGE_CURVE('',#244047,#244049,#244051,.T.); +#244047 = VERTEX_POINT('',#244048); +#244048 = CARTESIAN_POINT('',(114.39165,-49.1331,1.585)); +#244049 = VERTEX_POINT('',#244050); +#244050 = CARTESIAN_POINT('',(114.33165,-49.0731,1.585)); +#244051 = CIRCLE('',#244052,5.999932016261E-02); +#244052 = AXIS2_PLACEMENT_3D('',#244053,#244054,#244055); +#244053 = CARTESIAN_POINT('',(114.39164932015,-49.07310067984,1.585)); +#244054 = DIRECTION('',(0.,0.,-1.)); +#244055 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#244056 = ORIENTED_EDGE('',*,*,#244057,.T.); +#244057 = EDGE_CURVE('',#244049,#244058,#244060,.T.); +#244058 = VERTEX_POINT('',#244059); +#244059 = CARTESIAN_POINT('',(114.33165,-46.1831,1.585)); +#244060 = LINE('',#244061,#244062); +#244061 = CARTESIAN_POINT('',(114.33165,-49.0731,1.585)); +#244062 = VECTOR('',#244063,1.); +#244063 = DIRECTION('',(0.,1.,0.)); +#244064 = ORIENTED_EDGE('',*,*,#244065,.T.); +#244065 = EDGE_CURVE('',#244058,#244066,#244068,.T.); +#244066 = VERTEX_POINT('',#244067); +#244067 = CARTESIAN_POINT('',(113.69165,-46.1831,1.585)); +#244068 = LINE('',#244069,#244070); +#244069 = CARTESIAN_POINT('',(114.33165,-46.1831,1.585)); +#244070 = VECTOR('',#244071,1.); +#244071 = DIRECTION('',(-1.,0.,0.)); +#244072 = ORIENTED_EDGE('',*,*,#244073,.T.); +#244073 = EDGE_CURVE('',#244066,#244074,#244076,.T.); +#244074 = VERTEX_POINT('',#244075); +#244075 = CARTESIAN_POINT('',(113.69165,-49.7731,1.585)); +#244076 = LINE('',#244077,#244078); +#244077 = CARTESIAN_POINT('',(113.69165,-46.1831,1.585)); +#244078 = VECTOR('',#244079,1.); +#244079 = DIRECTION('',(0.,-1.,0.)); +#244080 = ORIENTED_EDGE('',*,*,#244081,.T.); +#244081 = EDGE_CURVE('',#244074,#244082,#244084,.T.); +#244082 = VERTEX_POINT('',#244083); +#244083 = CARTESIAN_POINT('',(123.69165,-49.7731,1.585)); +#244084 = LINE('',#244085,#244086); +#244085 = CARTESIAN_POINT('',(113.69165,-49.7731,1.585)); +#244086 = VECTOR('',#244087,1.); +#244087 = DIRECTION('',(1.,0.,0.)); +#244088 = ORIENTED_EDGE('',*,*,#244089,.T.); +#244089 = EDGE_CURVE('',#244082,#244090,#244092,.T.); +#244090 = VERTEX_POINT('',#244091); +#244091 = CARTESIAN_POINT('',(123.69165,-48.911628,1.585)); +#244092 = LINE('',#244093,#244094); +#244093 = CARTESIAN_POINT('',(123.69165,-49.7731,1.585)); +#244094 = VECTOR('',#244095,1.); +#244095 = DIRECTION('',(0.,1.,0.)); +#244096 = ORIENTED_EDGE('',*,*,#244097,.T.); +#244097 = EDGE_CURVE('',#244090,#244098,#244100,.T.); +#244098 = VERTEX_POINT('',#244099); +#244099 = CARTESIAN_POINT('',(123.724986,-48.89782,1.585)); +#244100 = LINE('',#244101,#244102); +#244101 = CARTESIAN_POINT('',(123.69165,-48.911628,1.585)); +#244102 = VECTOR('',#244103,1.); +#244103 = DIRECTION('',(0.923881720642,0.382678149707,0.)); +#244104 = ORIENTED_EDGE('',*,*,#244105,.T.); +#244105 = EDGE_CURVE('',#244098,#244106,#244108,.T.); +#244106 = VERTEX_POINT('',#244107); +#244107 = CARTESIAN_POINT('',(123.724986,-48.64838,1.585)); +#244108 = CIRCLE('',#244109,0.149999366947); +#244109 = AXIS2_PLACEMENT_3D('',#244110,#244111,#244112); +#244110 = CARTESIAN_POINT('',(123.64165094324,-48.7731,1.585)); +#244111 = DIRECTION('',(0.,-0.,1.)); +#244112 = DIRECTION('',(0.555569389738,-0.831470175765,-0.)); +#244113 = ORIENTED_EDGE('',*,*,#244114,.T.); +#244114 = EDGE_CURVE('',#244106,#244115,#244117,.T.); +#244115 = VERTEX_POINT('',#244116); +#244116 = CARTESIAN_POINT('',(123.69165,-48.634571,1.585)); +#244117 = LINE('',#244118,#244119); +#244118 = CARTESIAN_POINT('',(123.724986,-48.64838,1.585)); +#244119 = VECTOR('',#244120,1.); +#244120 = DIRECTION('',(-0.923871922094,0.382701805021,0.)); +#244121 = ORIENTED_EDGE('',*,*,#244122,.T.); +#244122 = EDGE_CURVE('',#244115,#244123,#244125,.T.); +#244123 = VERTEX_POINT('',#244124); +#244124 = CARTESIAN_POINT('',(123.69165,-46.1831,1.585)); +#244125 = LINE('',#244126,#244127); +#244126 = CARTESIAN_POINT('',(123.69165,-48.634571,1.585)); +#244127 = VECTOR('',#244128,1.); +#244128 = DIRECTION('',(0.,1.,0.)); +#244129 = ORIENTED_EDGE('',*,*,#244130,.T.); +#244130 = EDGE_CURVE('',#244123,#244131,#244133,.T.); +#244131 = VERTEX_POINT('',#244132); +#244132 = CARTESIAN_POINT('',(123.05165,-46.1831,1.585)); +#244133 = LINE('',#244134,#244135); +#244134 = CARTESIAN_POINT('',(123.69165,-46.1831,1.585)); +#244135 = VECTOR('',#244136,1.); +#244136 = DIRECTION('',(-1.,0.,0.)); +#244137 = ORIENTED_EDGE('',*,*,#244138,.T.); +#244138 = EDGE_CURVE('',#244131,#244139,#244141,.T.); +#244139 = VERTEX_POINT('',#244140); +#244140 = CARTESIAN_POINT('',(123.05165,-49.0731,1.585)); +#244141 = LINE('',#244142,#244143); +#244142 = CARTESIAN_POINT('',(123.05165,-46.1831,1.585)); +#244143 = VECTOR('',#244144,1.); +#244144 = DIRECTION('',(0.,-1.,0.)); +#244145 = ORIENTED_EDGE('',*,*,#244146,.T.); +#244146 = EDGE_CURVE('',#244139,#244147,#244149,.T.); +#244147 = VERTEX_POINT('',#244148); +#244148 = CARTESIAN_POINT('',(122.99165,-49.1331,1.585)); +#244149 = CIRCLE('',#244150,5.999932016257E-02); +#244150 = AXIS2_PLACEMENT_3D('',#244151,#244152,#244153); +#244151 = CARTESIAN_POINT('',(122.99165067984,-49.07310067984,1.585)); +#244152 = DIRECTION('',(0.,0.,-1.)); +#244153 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#244154 = ORIENTED_EDGE('',*,*,#244155,.T.); +#244155 = EDGE_CURVE('',#244147,#244047,#244156,.T.); +#244156 = LINE('',#244157,#244158); +#244157 = CARTESIAN_POINT('',(122.99165,-49.1331,1.585)); +#244158 = VECTOR('',#244159,1.); +#244159 = DIRECTION('',(-1.,0.,0.)); +#244160 = FACE_BOUND('',#244161,.F.); +#244161 = EDGE_LOOP('',(#244162,#244173,#244181,#244189,#244197,#244206, + #244214,#244222,#244230,#244239,#244247,#244255,#244263,#244272, + #244280,#244288,#244296,#244305,#244313,#244321,#244329,#244338)); +#244162 = ORIENTED_EDGE('',*,*,#244163,.T.); +#244163 = EDGE_CURVE('',#244164,#244166,#244168,.T.); +#244164 = VERTEX_POINT('',#244165); +#244165 = CARTESIAN_POINT('',(116.94165,-44.6831,1.585)); +#244166 = VERTEX_POINT('',#244167); +#244167 = CARTESIAN_POINT('',(116.88165,-44.6231,1.585)); +#244168 = CIRCLE('',#244169,5.999932016261E-02); +#244169 = AXIS2_PLACEMENT_3D('',#244170,#244171,#244172); +#244170 = CARTESIAN_POINT('',(116.94164932015,-44.62310067984,1.585)); +#244171 = DIRECTION('',(0.,0.,-1.)); +#244172 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244173 = ORIENTED_EDGE('',*,*,#244174,.T.); +#244174 = EDGE_CURVE('',#244166,#244175,#244177,.T.); +#244175 = VERTEX_POINT('',#244176); +#244176 = CARTESIAN_POINT('',(116.88165,-43.9231,1.585)); +#244177 = LINE('',#244178,#244179); +#244178 = CARTESIAN_POINT('',(116.88165,-44.6231,1.585)); +#244179 = VECTOR('',#244180,1.); +#244180 = DIRECTION('',(0.,1.,0.)); +#244181 = ORIENTED_EDGE('',*,*,#244182,.T.); +#244182 = EDGE_CURVE('',#244175,#244183,#244185,.T.); +#244183 = VERTEX_POINT('',#244184); +#244184 = CARTESIAN_POINT('',(115.50165,-43.9231,1.585)); +#244185 = LINE('',#244186,#244187); +#244186 = CARTESIAN_POINT('',(116.88165,-43.9231,1.585)); +#244187 = VECTOR('',#244188,1.); +#244188 = DIRECTION('',(-1.,0.,0.)); +#244189 = ORIENTED_EDGE('',*,*,#244190,.T.); +#244190 = EDGE_CURVE('',#244183,#244191,#244193,.T.); +#244191 = VERTEX_POINT('',#244192); +#244192 = CARTESIAN_POINT('',(115.50165,-44.6231,1.585)); +#244193 = LINE('',#244194,#244195); +#244194 = CARTESIAN_POINT('',(115.50165,-43.9231,1.585)); +#244195 = VECTOR('',#244196,1.); +#244196 = DIRECTION('',(0.,-1.,0.)); +#244197 = ORIENTED_EDGE('',*,*,#244198,.T.); +#244198 = EDGE_CURVE('',#244191,#244199,#244201,.T.); +#244199 = VERTEX_POINT('',#244200); +#244200 = CARTESIAN_POINT('',(115.44165,-44.6831,1.585)); +#244201 = CIRCLE('',#244202,5.999932016258E-02); +#244202 = AXIS2_PLACEMENT_3D('',#244203,#244204,#244205); +#244203 = CARTESIAN_POINT('',(115.44165067984,-44.62310067984,1.585)); +#244204 = DIRECTION('',(0.,0.,-1.)); +#244205 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#244206 = ORIENTED_EDGE('',*,*,#244207,.T.); +#244207 = EDGE_CURVE('',#244199,#244208,#244210,.T.); +#244208 = VERTEX_POINT('',#244209); +#244209 = CARTESIAN_POINT('',(113.69165,-44.6831,1.585)); +#244210 = LINE('',#244211,#244212); +#244211 = CARTESIAN_POINT('',(115.44165,-44.6831,1.585)); +#244212 = VECTOR('',#244213,1.); +#244213 = DIRECTION('',(-1.,0.,0.)); +#244214 = ORIENTED_EDGE('',*,*,#244215,.T.); +#244215 = EDGE_CURVE('',#244208,#244216,#244218,.T.); +#244216 = VERTEX_POINT('',#244217); +#244217 = CARTESIAN_POINT('',(113.69165,-46.0631,1.585)); +#244218 = LINE('',#244219,#244220); +#244219 = CARTESIAN_POINT('',(113.69165,-44.6831,1.585)); +#244220 = VECTOR('',#244221,1.); +#244221 = DIRECTION('',(0.,-1.,0.)); +#244222 = ORIENTED_EDGE('',*,*,#244223,.T.); +#244223 = EDGE_CURVE('',#244216,#244224,#244226,.T.); +#244224 = VERTEX_POINT('',#244225); +#244225 = CARTESIAN_POINT('',(114.39165,-46.0631,1.585)); +#244226 = LINE('',#244227,#244228); +#244227 = CARTESIAN_POINT('',(113.69165,-46.0631,1.585)); +#244228 = VECTOR('',#244229,1.); +#244229 = DIRECTION('',(1.,0.,0.)); +#244230 = ORIENTED_EDGE('',*,*,#244231,.T.); +#244231 = EDGE_CURVE('',#244224,#244232,#244234,.T.); +#244232 = VERTEX_POINT('',#244233); +#244233 = CARTESIAN_POINT('',(114.45165,-46.1231,1.585)); +#244234 = CIRCLE('',#244235,5.999932016261E-02); +#244235 = AXIS2_PLACEMENT_3D('',#244236,#244237,#244238); +#244236 = CARTESIAN_POINT('',(114.39165067984,-46.12309932015,1.585)); +#244237 = DIRECTION('',(0.,0.,-1.)); +#244238 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#244239 = ORIENTED_EDGE('',*,*,#244240,.T.); +#244240 = EDGE_CURVE('',#244232,#244241,#244243,.T.); +#244241 = VERTEX_POINT('',#244242); +#244242 = CARTESIAN_POINT('',(114.45165,-49.0131,1.585)); +#244243 = LINE('',#244244,#244245); +#244244 = CARTESIAN_POINT('',(114.45165,-46.1231,1.585)); +#244245 = VECTOR('',#244246,1.); +#244246 = DIRECTION('',(0.,-1.,0.)); +#244247 = ORIENTED_EDGE('',*,*,#244248,.T.); +#244248 = EDGE_CURVE('',#244241,#244249,#244251,.T.); +#244249 = VERTEX_POINT('',#244250); +#244250 = CARTESIAN_POINT('',(122.93165,-49.0131,1.585)); +#244251 = LINE('',#244252,#244253); +#244252 = CARTESIAN_POINT('',(114.45165,-49.0131,1.585)); +#244253 = VECTOR('',#244254,1.); +#244254 = DIRECTION('',(1.,0.,0.)); +#244255 = ORIENTED_EDGE('',*,*,#244256,.T.); +#244256 = EDGE_CURVE('',#244249,#244257,#244259,.T.); +#244257 = VERTEX_POINT('',#244258); +#244258 = CARTESIAN_POINT('',(122.93165,-46.1231,1.585)); +#244259 = LINE('',#244260,#244261); +#244260 = CARTESIAN_POINT('',(122.93165,-49.0131,1.585)); +#244261 = VECTOR('',#244262,1.); +#244262 = DIRECTION('',(0.,1.,0.)); +#244263 = ORIENTED_EDGE('',*,*,#244264,.T.); +#244264 = EDGE_CURVE('',#244257,#244265,#244267,.T.); +#244265 = VERTEX_POINT('',#244266); +#244266 = CARTESIAN_POINT('',(122.99165,-46.0631,1.585)); +#244267 = CIRCLE('',#244268,5.999932016258E-02); +#244268 = AXIS2_PLACEMENT_3D('',#244269,#244270,#244271); +#244269 = CARTESIAN_POINT('',(122.99164932015,-46.12309932015,1.585)); +#244270 = DIRECTION('',(0.,0.,-1.)); +#244271 = DIRECTION('',(-0.999999999936,-1.133081623985E-05,-0.)); +#244272 = ORIENTED_EDGE('',*,*,#244273,.T.); +#244273 = EDGE_CURVE('',#244265,#244274,#244276,.T.); +#244274 = VERTEX_POINT('',#244275); +#244275 = CARTESIAN_POINT('',(123.69165,-46.0631,1.585)); +#244276 = LINE('',#244277,#244278); +#244277 = CARTESIAN_POINT('',(122.99165,-46.0631,1.585)); +#244278 = VECTOR('',#244279,1.); +#244279 = DIRECTION('',(1.,0.,0.)); +#244280 = ORIENTED_EDGE('',*,*,#244281,.T.); +#244281 = EDGE_CURVE('',#244274,#244282,#244284,.T.); +#244282 = VERTEX_POINT('',#244283); +#244283 = CARTESIAN_POINT('',(123.69165,-44.6831,1.585)); +#244284 = LINE('',#244285,#244286); +#244285 = CARTESIAN_POINT('',(123.69165,-46.0631,1.585)); +#244286 = VECTOR('',#244287,1.); +#244287 = DIRECTION('',(0.,1.,0.)); +#244288 = ORIENTED_EDGE('',*,*,#244289,.T.); +#244289 = EDGE_CURVE('',#244282,#244290,#244292,.T.); +#244290 = VERTEX_POINT('',#244291); +#244291 = CARTESIAN_POINT('',(121.94165,-44.6831,1.585)); +#244292 = LINE('',#244293,#244294); +#244293 = CARTESIAN_POINT('',(123.69165,-44.6831,1.585)); +#244294 = VECTOR('',#244295,1.); +#244295 = DIRECTION('',(-1.,0.,0.)); +#244296 = ORIENTED_EDGE('',*,*,#244297,.T.); +#244297 = EDGE_CURVE('',#244290,#244298,#244300,.T.); +#244298 = VERTEX_POINT('',#244299); +#244299 = CARTESIAN_POINT('',(121.88165,-44.6231,1.585)); +#244300 = CIRCLE('',#244301,5.999932016261E-02); +#244301 = AXIS2_PLACEMENT_3D('',#244302,#244303,#244304); +#244302 = CARTESIAN_POINT('',(121.94164932015,-44.62310067984,1.585)); +#244303 = DIRECTION('',(0.,0.,-1.)); +#244304 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244305 = ORIENTED_EDGE('',*,*,#244306,.T.); +#244306 = EDGE_CURVE('',#244298,#244307,#244309,.T.); +#244307 = VERTEX_POINT('',#244308); +#244308 = CARTESIAN_POINT('',(121.88165,-43.9231,1.585)); +#244309 = LINE('',#244310,#244311); +#244310 = CARTESIAN_POINT('',(121.88165,-44.6231,1.585)); +#244311 = VECTOR('',#244312,1.); +#244312 = DIRECTION('',(0.,1.,0.)); +#244313 = ORIENTED_EDGE('',*,*,#244314,.T.); +#244314 = EDGE_CURVE('',#244307,#244315,#244317,.T.); +#244315 = VERTEX_POINT('',#244316); +#244316 = CARTESIAN_POINT('',(120.50165,-43.9231,1.585)); +#244317 = LINE('',#244318,#244319); +#244318 = CARTESIAN_POINT('',(121.88165,-43.9231,1.585)); +#244319 = VECTOR('',#244320,1.); +#244320 = DIRECTION('',(-1.,0.,0.)); +#244321 = ORIENTED_EDGE('',*,*,#244322,.T.); +#244322 = EDGE_CURVE('',#244315,#244323,#244325,.T.); +#244323 = VERTEX_POINT('',#244324); +#244324 = CARTESIAN_POINT('',(120.50165,-44.6231,1.585)); +#244325 = LINE('',#244326,#244327); +#244326 = CARTESIAN_POINT('',(120.50165,-43.9231,1.585)); +#244327 = VECTOR('',#244328,1.); +#244328 = DIRECTION('',(0.,-1.,0.)); +#244329 = ORIENTED_EDGE('',*,*,#244330,.T.); +#244330 = EDGE_CURVE('',#244323,#244331,#244333,.T.); +#244331 = VERTEX_POINT('',#244332); +#244332 = CARTESIAN_POINT('',(120.44165,-44.6831,1.585)); +#244333 = CIRCLE('',#244334,5.999932016258E-02); +#244334 = AXIS2_PLACEMENT_3D('',#244335,#244336,#244337); +#244335 = CARTESIAN_POINT('',(120.44165067984,-44.62310067984,1.585)); +#244336 = DIRECTION('',(0.,0.,-1.)); +#244337 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#244338 = ORIENTED_EDGE('',*,*,#244339,.T.); +#244339 = EDGE_CURVE('',#244331,#244164,#244340,.T.); +#244340 = LINE('',#244341,#244342); +#244341 = CARTESIAN_POINT('',(120.44165,-44.6831,1.585)); +#244342 = VECTOR('',#244343,1.); +#244343 = DIRECTION('',(-1.,0.,0.)); +#244344 = FACE_BOUND('',#244345,.F.); +#244345 = EDGE_LOOP('',(#244346,#244356,#244364,#244372)); +#244346 = ORIENTED_EDGE('',*,*,#244347,.T.); +#244347 = EDGE_CURVE('',#244348,#244350,#244352,.T.); +#244348 = VERTEX_POINT('',#244349); +#244349 = CARTESIAN_POINT('',(115.38165,-44.5631,1.585)); +#244350 = VERTEX_POINT('',#244351); +#244351 = CARTESIAN_POINT('',(115.38165,-43.9331,1.585)); +#244352 = LINE('',#244353,#244354); +#244353 = CARTESIAN_POINT('',(115.38165,-44.5631,1.585)); +#244354 = VECTOR('',#244355,1.); +#244355 = DIRECTION('',(0.,1.,0.)); +#244356 = ORIENTED_EDGE('',*,*,#244357,.T.); +#244357 = EDGE_CURVE('',#244350,#244358,#244360,.T.); +#244358 = VERTEX_POINT('',#244359); +#244359 = CARTESIAN_POINT('',(113.70165,-43.9331,1.585)); +#244360 = LINE('',#244361,#244362); +#244361 = CARTESIAN_POINT('',(115.38165,-43.9331,1.585)); +#244362 = VECTOR('',#244363,1.); +#244363 = DIRECTION('',(-1.,0.,0.)); +#244364 = ORIENTED_EDGE('',*,*,#244365,.T.); +#244365 = EDGE_CURVE('',#244358,#244366,#244368,.T.); +#244366 = VERTEX_POINT('',#244367); +#244367 = CARTESIAN_POINT('',(113.70165,-44.5631,1.585)); +#244368 = LINE('',#244369,#244370); +#244369 = CARTESIAN_POINT('',(113.70165,-43.9331,1.585)); +#244370 = VECTOR('',#244371,1.); +#244371 = DIRECTION('',(0.,-1.,0.)); +#244372 = ORIENTED_EDGE('',*,*,#244373,.T.); +#244373 = EDGE_CURVE('',#244366,#244348,#244374,.T.); +#244374 = LINE('',#244375,#244376); +#244375 = CARTESIAN_POINT('',(113.70165,-44.5631,1.585)); +#244376 = VECTOR('',#244377,1.); +#244377 = DIRECTION('',(1.,0.,0.)); +#244378 = FACE_BOUND('',#244379,.F.); +#244379 = EDGE_LOOP('',(#244380,#244390,#244398,#244406)); +#244380 = ORIENTED_EDGE('',*,*,#244381,.T.); +#244381 = EDGE_CURVE('',#244382,#244384,#244386,.T.); +#244382 = VERTEX_POINT('',#244383); +#244383 = CARTESIAN_POINT('',(120.38165,-44.5631,1.585)); +#244384 = VERTEX_POINT('',#244385); +#244385 = CARTESIAN_POINT('',(120.38165,-43.9331,1.585)); +#244386 = LINE('',#244387,#244388); +#244387 = CARTESIAN_POINT('',(120.38165,-44.5631,1.585)); +#244388 = VECTOR('',#244389,1.); +#244389 = DIRECTION('',(0.,1.,0.)); +#244390 = ORIENTED_EDGE('',*,*,#244391,.T.); +#244391 = EDGE_CURVE('',#244384,#244392,#244394,.T.); +#244392 = VERTEX_POINT('',#244393); +#244393 = CARTESIAN_POINT('',(117.00165,-43.9331,1.585)); +#244394 = LINE('',#244395,#244396); +#244395 = CARTESIAN_POINT('',(120.38165,-43.9331,1.585)); +#244396 = VECTOR('',#244397,1.); +#244397 = DIRECTION('',(-1.,0.,0.)); +#244398 = ORIENTED_EDGE('',*,*,#244399,.T.); +#244399 = EDGE_CURVE('',#244392,#244400,#244402,.T.); +#244400 = VERTEX_POINT('',#244401); +#244401 = CARTESIAN_POINT('',(117.00165,-44.5631,1.585)); +#244402 = LINE('',#244403,#244404); +#244403 = CARTESIAN_POINT('',(117.00165,-43.9331,1.585)); +#244404 = VECTOR('',#244405,1.); +#244405 = DIRECTION('',(0.,-1.,0.)); +#244406 = ORIENTED_EDGE('',*,*,#244407,.T.); +#244407 = EDGE_CURVE('',#244400,#244382,#244408,.T.); +#244408 = LINE('',#244409,#244410); +#244409 = CARTESIAN_POINT('',(117.00165,-44.5631,1.585)); +#244410 = VECTOR('',#244411,1.); +#244411 = DIRECTION('',(1.,0.,0.)); +#244412 = FACE_BOUND('',#244413,.F.); +#244413 = EDGE_LOOP('',(#244414,#244424,#244432,#244440)); +#244414 = ORIENTED_EDGE('',*,*,#244415,.T.); +#244415 = EDGE_CURVE('',#244416,#244418,#244420,.T.); +#244416 = VERTEX_POINT('',#244417); +#244417 = CARTESIAN_POINT('',(123.68165,-44.5631,1.585)); +#244418 = VERTEX_POINT('',#244419); +#244419 = CARTESIAN_POINT('',(123.68165,-43.9331,1.585)); +#244420 = LINE('',#244421,#244422); +#244421 = CARTESIAN_POINT('',(123.68165,-44.5631,1.585)); +#244422 = VECTOR('',#244423,1.); +#244423 = DIRECTION('',(0.,1.,0.)); +#244424 = ORIENTED_EDGE('',*,*,#244425,.T.); +#244425 = EDGE_CURVE('',#244418,#244426,#244428,.T.); +#244426 = VERTEX_POINT('',#244427); +#244427 = CARTESIAN_POINT('',(122.00165,-43.9331,1.585)); +#244428 = LINE('',#244429,#244430); +#244429 = CARTESIAN_POINT('',(123.68165,-43.9331,1.585)); +#244430 = VECTOR('',#244431,1.); +#244431 = DIRECTION('',(-1.,0.,0.)); +#244432 = ORIENTED_EDGE('',*,*,#244433,.T.); +#244433 = EDGE_CURVE('',#244426,#244434,#244436,.T.); +#244434 = VERTEX_POINT('',#244435); +#244435 = CARTESIAN_POINT('',(122.00165,-44.5631,1.585)); +#244436 = LINE('',#244437,#244438); +#244437 = CARTESIAN_POINT('',(122.00165,-43.9331,1.585)); +#244438 = VECTOR('',#244439,1.); +#244439 = DIRECTION('',(0.,-1.,0.)); +#244440 = ORIENTED_EDGE('',*,*,#244441,.T.); +#244441 = EDGE_CURVE('',#244434,#244416,#244442,.T.); +#244442 = LINE('',#244443,#244444); +#244443 = CARTESIAN_POINT('',(122.00165,-44.5631,1.585)); +#244444 = VECTOR('',#244445,1.); +#244445 = DIRECTION('',(1.,0.,0.)); +#244446 = PLANE('',#244447); +#244447 = AXIS2_PLACEMENT_3D('',#244448,#244449,#244450); +#244448 = CARTESIAN_POINT('',(0.,0.,1.585)); +#244449 = DIRECTION('',(0.,0.,1.)); +#244450 = DIRECTION('',(1.,0.,-0.)); +#244451 = SHELL_BASED_SURFACE_MODEL('',(#244452)); +#244452 = OPEN_SHELL('',(#244453)); +#244453 = ADVANCED_FACE('',(#244454,#244524,#244608,#244792,#244826, + #244860),#244894,.T.); +#244454 = FACE_BOUND('',#244455,.F.); +#244455 = EDGE_LOOP('',(#244456,#244467,#244475,#244484,#244492,#244501, + #244509,#244518)); +#244456 = ORIENTED_EDGE('',*,*,#244457,.T.); +#244457 = EDGE_CURVE('',#244458,#244460,#244462,.T.); +#244458 = VERTEX_POINT('',#244459); +#244459 = CARTESIAN_POINT('',(124.57165,-43.8631,1.585)); +#244460 = VERTEX_POINT('',#244461); +#244461 = CARTESIAN_POINT('',(124.63165,-43.8031,1.585)); +#244462 = CIRCLE('',#244463,5.999932016257E-02); +#244463 = AXIS2_PLACEMENT_3D('',#244464,#244465,#244466); +#244464 = CARTESIAN_POINT('',(124.63164932015,-43.86309932015,1.585)); +#244465 = DIRECTION('',(0.,0.,-1.)); +#244466 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#244467 = ORIENTED_EDGE('',*,*,#244468,.T.); +#244468 = EDGE_CURVE('',#244460,#244469,#244471,.T.); +#244469 = VERTEX_POINT('',#244470); +#244470 = CARTESIAN_POINT('',(132.25165,-43.8031,1.585)); +#244471 = LINE('',#244472,#244473); +#244472 = CARTESIAN_POINT('',(124.63165,-43.8031,1.585)); +#244473 = VECTOR('',#244474,1.); +#244474 = DIRECTION('',(1.,0.,0.)); +#244475 = ORIENTED_EDGE('',*,*,#244476,.T.); +#244476 = EDGE_CURVE('',#244469,#244477,#244479,.T.); +#244477 = VERTEX_POINT('',#244478); +#244478 = CARTESIAN_POINT('',(132.31165,-43.8631,1.585)); +#244479 = CIRCLE('',#244480,5.999932016262E-02); +#244480 = AXIS2_PLACEMENT_3D('',#244481,#244482,#244483); +#244481 = CARTESIAN_POINT('',(132.25165067984,-43.86309932015,1.585)); +#244482 = DIRECTION('',(0.,0.,-1.)); +#244483 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#244484 = ORIENTED_EDGE('',*,*,#244485,.T.); +#244485 = EDGE_CURVE('',#244477,#244486,#244488,.T.); +#244486 = VERTEX_POINT('',#244487); +#244487 = CARTESIAN_POINT('',(132.31165,-49.8331,1.585)); +#244488 = LINE('',#244489,#244490); +#244489 = CARTESIAN_POINT('',(132.31165,-43.8631,1.585)); +#244490 = VECTOR('',#244491,1.); +#244491 = DIRECTION('',(0.,-1.,0.)); +#244492 = ORIENTED_EDGE('',*,*,#244493,.T.); +#244493 = EDGE_CURVE('',#244486,#244494,#244496,.T.); +#244494 = VERTEX_POINT('',#244495); +#244495 = CARTESIAN_POINT('',(132.25165,-49.8931,1.585)); +#244496 = CIRCLE('',#244497,5.999932016254E-02); +#244497 = AXIS2_PLACEMENT_3D('',#244498,#244499,#244500); +#244498 = CARTESIAN_POINT('',(132.25165067984,-49.83310067984,1.585)); +#244499 = DIRECTION('',(0.,0.,-1.)); +#244500 = DIRECTION('',(0.999999999936,1.133081683199E-05,0.)); +#244501 = ORIENTED_EDGE('',*,*,#244502,.T.); +#244502 = EDGE_CURVE('',#244494,#244503,#244505,.T.); +#244503 = VERTEX_POINT('',#244504); +#244504 = CARTESIAN_POINT('',(124.63165,-49.8931,1.585)); +#244505 = LINE('',#244506,#244507); +#244506 = CARTESIAN_POINT('',(132.25165,-49.8931,1.585)); +#244507 = VECTOR('',#244508,1.); +#244508 = DIRECTION('',(-1.,0.,0.)); +#244509 = ORIENTED_EDGE('',*,*,#244510,.T.); +#244510 = EDGE_CURVE('',#244503,#244511,#244513,.T.); +#244511 = VERTEX_POINT('',#244512); +#244512 = CARTESIAN_POINT('',(124.57165,-49.8331,1.585)); +#244513 = CIRCLE('',#244514,5.999932016258E-02); +#244514 = AXIS2_PLACEMENT_3D('',#244515,#244516,#244517); +#244515 = CARTESIAN_POINT('',(124.63164932015,-49.83310067984,1.585)); +#244516 = DIRECTION('',(0.,0.,-1.)); +#244517 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#244518 = ORIENTED_EDGE('',*,*,#244519,.T.); +#244519 = EDGE_CURVE('',#244511,#244458,#244520,.T.); +#244520 = LINE('',#244521,#244522); +#244521 = CARTESIAN_POINT('',(124.57165,-49.8331,1.585)); +#244522 = VECTOR('',#244523,1.); +#244523 = DIRECTION('',(0.,1.,0.)); +#244524 = FACE_BOUND('',#244525,.F.); +#244525 = EDGE_LOOP('',(#244526,#244537,#244545,#244553,#244561,#244569, + #244577,#244585,#244593,#244602)); +#244526 = ORIENTED_EDGE('',*,*,#244527,.T.); +#244527 = EDGE_CURVE('',#244528,#244530,#244532,.T.); +#244528 = VERTEX_POINT('',#244529); +#244529 = CARTESIAN_POINT('',(125.39165,-49.1331,1.585)); +#244530 = VERTEX_POINT('',#244531); +#244531 = CARTESIAN_POINT('',(125.33165,-49.0731,1.585)); +#244532 = CIRCLE('',#244533,5.999932016261E-02); +#244533 = AXIS2_PLACEMENT_3D('',#244534,#244535,#244536); +#244534 = CARTESIAN_POINT('',(125.39164932015,-49.07310067984,1.585)); +#244535 = DIRECTION('',(0.,0.,-1.)); +#244536 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#244537 = ORIENTED_EDGE('',*,*,#244538,.T.); +#244538 = EDGE_CURVE('',#244530,#244539,#244541,.T.); +#244539 = VERTEX_POINT('',#244540); +#244540 = CARTESIAN_POINT('',(125.33165,-46.1831,1.585)); +#244541 = LINE('',#244542,#244543); +#244542 = CARTESIAN_POINT('',(125.33165,-49.0731,1.585)); +#244543 = VECTOR('',#244544,1.); +#244544 = DIRECTION('',(0.,1.,0.)); +#244545 = ORIENTED_EDGE('',*,*,#244546,.T.); +#244546 = EDGE_CURVE('',#244539,#244547,#244549,.T.); +#244547 = VERTEX_POINT('',#244548); +#244548 = CARTESIAN_POINT('',(124.69165,-46.1831,1.585)); +#244549 = LINE('',#244550,#244551); +#244550 = CARTESIAN_POINT('',(125.33165,-46.1831,1.585)); +#244551 = VECTOR('',#244552,1.); +#244552 = DIRECTION('',(-1.,0.,0.)); +#244553 = ORIENTED_EDGE('',*,*,#244554,.T.); +#244554 = EDGE_CURVE('',#244547,#244555,#244557,.T.); +#244555 = VERTEX_POINT('',#244556); +#244556 = CARTESIAN_POINT('',(124.69165,-49.7731,1.585)); +#244557 = LINE('',#244558,#244559); +#244558 = CARTESIAN_POINT('',(124.69165,-46.1831,1.585)); +#244559 = VECTOR('',#244560,1.); +#244560 = DIRECTION('',(0.,-1.,0.)); +#244561 = ORIENTED_EDGE('',*,*,#244562,.T.); +#244562 = EDGE_CURVE('',#244555,#244563,#244565,.T.); +#244563 = VERTEX_POINT('',#244564); +#244564 = CARTESIAN_POINT('',(132.19165,-49.7731,1.585)); +#244565 = LINE('',#244566,#244567); +#244566 = CARTESIAN_POINT('',(124.69165,-49.7731,1.585)); +#244567 = VECTOR('',#244568,1.); +#244568 = DIRECTION('',(1.,0.,0.)); +#244569 = ORIENTED_EDGE('',*,*,#244570,.T.); +#244570 = EDGE_CURVE('',#244563,#244571,#244573,.T.); +#244571 = VERTEX_POINT('',#244572); +#244572 = CARTESIAN_POINT('',(132.19165,-46.1831,1.585)); +#244573 = LINE('',#244574,#244575); +#244574 = CARTESIAN_POINT('',(132.19165,-49.7731,1.585)); +#244575 = VECTOR('',#244576,1.); +#244576 = DIRECTION('',(0.,1.,0.)); +#244577 = ORIENTED_EDGE('',*,*,#244578,.T.); +#244578 = EDGE_CURVE('',#244571,#244579,#244581,.T.); +#244579 = VERTEX_POINT('',#244580); +#244580 = CARTESIAN_POINT('',(131.55165,-46.1831,1.585)); +#244581 = LINE('',#244582,#244583); +#244582 = CARTESIAN_POINT('',(132.19165,-46.1831,1.585)); +#244583 = VECTOR('',#244584,1.); +#244584 = DIRECTION('',(-1.,0.,0.)); +#244585 = ORIENTED_EDGE('',*,*,#244586,.T.); +#244586 = EDGE_CURVE('',#244579,#244587,#244589,.T.); +#244587 = VERTEX_POINT('',#244588); +#244588 = CARTESIAN_POINT('',(131.55165,-49.0731,1.585)); +#244589 = LINE('',#244590,#244591); +#244590 = CARTESIAN_POINT('',(131.55165,-46.1831,1.585)); +#244591 = VECTOR('',#244592,1.); +#244592 = DIRECTION('',(0.,-1.,0.)); +#244593 = ORIENTED_EDGE('',*,*,#244594,.T.); +#244594 = EDGE_CURVE('',#244587,#244595,#244597,.T.); +#244595 = VERTEX_POINT('',#244596); +#244596 = CARTESIAN_POINT('',(131.49165,-49.1331,1.585)); +#244597 = CIRCLE('',#244598,5.999932016262E-02); +#244598 = AXIS2_PLACEMENT_3D('',#244599,#244600,#244601); +#244599 = CARTESIAN_POINT('',(131.49165067984,-49.07310067984,1.585)); +#244600 = DIRECTION('',(0.,0.,-1.)); +#244601 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#244602 = ORIENTED_EDGE('',*,*,#244603,.T.); +#244603 = EDGE_CURVE('',#244595,#244528,#244604,.T.); +#244604 = LINE('',#244605,#244606); +#244605 = CARTESIAN_POINT('',(131.49165,-49.1331,1.585)); +#244606 = VECTOR('',#244607,1.); +#244607 = DIRECTION('',(-1.,0.,0.)); +#244608 = FACE_BOUND('',#244609,.F.); +#244609 = EDGE_LOOP('',(#244610,#244621,#244629,#244637,#244645,#244654, + #244662,#244670,#244678,#244687,#244695,#244703,#244711,#244720, + #244728,#244736,#244744,#244753,#244761,#244769,#244777,#244786)); +#244610 = ORIENTED_EDGE('',*,*,#244611,.T.); +#244611 = EDGE_CURVE('',#244612,#244614,#244616,.T.); +#244612 = VERTEX_POINT('',#244613); +#244613 = CARTESIAN_POINT('',(127.94165,-44.6831,1.585)); +#244614 = VERTEX_POINT('',#244615); +#244615 = CARTESIAN_POINT('',(127.88165,-44.6231,1.585)); +#244616 = CIRCLE('',#244617,5.999932016261E-02); +#244617 = AXIS2_PLACEMENT_3D('',#244618,#244619,#244620); +#244618 = CARTESIAN_POINT('',(127.94164932015,-44.62310067984,1.585)); +#244619 = DIRECTION('',(0.,0.,-1.)); +#244620 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244621 = ORIENTED_EDGE('',*,*,#244622,.T.); +#244622 = EDGE_CURVE('',#244614,#244623,#244625,.T.); +#244623 = VERTEX_POINT('',#244624); +#244624 = CARTESIAN_POINT('',(127.88165,-43.9231,1.585)); +#244625 = LINE('',#244626,#244627); +#244626 = CARTESIAN_POINT('',(127.88165,-44.6231,1.585)); +#244627 = VECTOR('',#244628,1.); +#244628 = DIRECTION('',(0.,1.,0.)); +#244629 = ORIENTED_EDGE('',*,*,#244630,.T.); +#244630 = EDGE_CURVE('',#244623,#244631,#244633,.T.); +#244631 = VERTEX_POINT('',#244632); +#244632 = CARTESIAN_POINT('',(126.50165,-43.9231,1.585)); +#244633 = LINE('',#244634,#244635); +#244634 = CARTESIAN_POINT('',(127.88165,-43.9231,1.585)); +#244635 = VECTOR('',#244636,1.); +#244636 = DIRECTION('',(-1.,0.,0.)); +#244637 = ORIENTED_EDGE('',*,*,#244638,.T.); +#244638 = EDGE_CURVE('',#244631,#244639,#244641,.T.); +#244639 = VERTEX_POINT('',#244640); +#244640 = CARTESIAN_POINT('',(126.50165,-44.6231,1.585)); +#244641 = LINE('',#244642,#244643); +#244642 = CARTESIAN_POINT('',(126.50165,-43.9231,1.585)); +#244643 = VECTOR('',#244644,1.); +#244644 = DIRECTION('',(0.,-1.,0.)); +#244645 = ORIENTED_EDGE('',*,*,#244646,.T.); +#244646 = EDGE_CURVE('',#244639,#244647,#244649,.T.); +#244647 = VERTEX_POINT('',#244648); +#244648 = CARTESIAN_POINT('',(126.44165,-44.6831,1.585)); +#244649 = CIRCLE('',#244650,5.999932016258E-02); +#244650 = AXIS2_PLACEMENT_3D('',#244651,#244652,#244653); +#244651 = CARTESIAN_POINT('',(126.44165067984,-44.62310067984,1.585)); +#244652 = DIRECTION('',(0.,0.,-1.)); +#244653 = DIRECTION('',(0.999999999936,1.133081623985E-05,0.)); +#244654 = ORIENTED_EDGE('',*,*,#244655,.T.); +#244655 = EDGE_CURVE('',#244647,#244656,#244658,.T.); +#244656 = VERTEX_POINT('',#244657); +#244657 = CARTESIAN_POINT('',(124.69165,-44.6831,1.585)); +#244658 = LINE('',#244659,#244660); +#244659 = CARTESIAN_POINT('',(126.44165,-44.6831,1.585)); +#244660 = VECTOR('',#244661,1.); +#244661 = DIRECTION('',(-1.,0.,0.)); +#244662 = ORIENTED_EDGE('',*,*,#244663,.T.); +#244663 = EDGE_CURVE('',#244656,#244664,#244666,.T.); +#244664 = VERTEX_POINT('',#244665); +#244665 = CARTESIAN_POINT('',(124.69165,-46.0631,1.585)); +#244666 = LINE('',#244667,#244668); +#244667 = CARTESIAN_POINT('',(124.69165,-44.6831,1.585)); +#244668 = VECTOR('',#244669,1.); +#244669 = DIRECTION('',(0.,-1.,0.)); +#244670 = ORIENTED_EDGE('',*,*,#244671,.T.); +#244671 = EDGE_CURVE('',#244664,#244672,#244674,.T.); +#244672 = VERTEX_POINT('',#244673); +#244673 = CARTESIAN_POINT('',(125.39165,-46.0631,1.585)); +#244674 = LINE('',#244675,#244676); +#244675 = CARTESIAN_POINT('',(124.69165,-46.0631,1.585)); +#244676 = VECTOR('',#244677,1.); +#244677 = DIRECTION('',(1.,0.,0.)); +#244678 = ORIENTED_EDGE('',*,*,#244679,.T.); +#244679 = EDGE_CURVE('',#244672,#244680,#244682,.T.); +#244680 = VERTEX_POINT('',#244681); +#244681 = CARTESIAN_POINT('',(125.45165,-46.1231,1.585)); +#244682 = CIRCLE('',#244683,5.999932016261E-02); +#244683 = AXIS2_PLACEMENT_3D('',#244684,#244685,#244686); +#244684 = CARTESIAN_POINT('',(125.39165067984,-46.12309932015,1.585)); +#244685 = DIRECTION('',(0.,0.,-1.)); +#244686 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#244687 = ORIENTED_EDGE('',*,*,#244688,.T.); +#244688 = EDGE_CURVE('',#244680,#244689,#244691,.T.); +#244689 = VERTEX_POINT('',#244690); +#244690 = CARTESIAN_POINT('',(125.45165,-49.0131,1.585)); +#244691 = LINE('',#244692,#244693); +#244692 = CARTESIAN_POINT('',(125.45165,-46.1231,1.585)); +#244693 = VECTOR('',#244694,1.); +#244694 = DIRECTION('',(0.,-1.,0.)); +#244695 = ORIENTED_EDGE('',*,*,#244696,.T.); +#244696 = EDGE_CURVE('',#244689,#244697,#244699,.T.); +#244697 = VERTEX_POINT('',#244698); +#244698 = CARTESIAN_POINT('',(131.43165,-49.0131,1.585)); +#244699 = LINE('',#244700,#244701); +#244700 = CARTESIAN_POINT('',(125.45165,-49.0131,1.585)); +#244701 = VECTOR('',#244702,1.); +#244702 = DIRECTION('',(1.,0.,0.)); +#244703 = ORIENTED_EDGE('',*,*,#244704,.T.); +#244704 = EDGE_CURVE('',#244697,#244705,#244707,.T.); +#244705 = VERTEX_POINT('',#244706); +#244706 = CARTESIAN_POINT('',(131.43165,-46.1231,1.585)); +#244707 = LINE('',#244708,#244709); +#244708 = CARTESIAN_POINT('',(131.43165,-49.0131,1.585)); +#244709 = VECTOR('',#244710,1.); +#244710 = DIRECTION('',(0.,1.,0.)); +#244711 = ORIENTED_EDGE('',*,*,#244712,.T.); +#244712 = EDGE_CURVE('',#244705,#244713,#244715,.T.); +#244713 = VERTEX_POINT('',#244714); +#244714 = CARTESIAN_POINT('',(131.49165,-46.0631,1.585)); +#244715 = CIRCLE('',#244716,5.999932016262E-02); +#244716 = AXIS2_PLACEMENT_3D('',#244717,#244718,#244719); +#244717 = CARTESIAN_POINT('',(131.49164932015,-46.12309932015,1.585)); +#244718 = DIRECTION('',(0.,0.,-1.)); +#244719 = DIRECTION('',(-0.999999999936,-1.133081552929E-05,-0.)); +#244720 = ORIENTED_EDGE('',*,*,#244721,.T.); +#244721 = EDGE_CURVE('',#244713,#244722,#244724,.T.); +#244722 = VERTEX_POINT('',#244723); +#244723 = CARTESIAN_POINT('',(132.19165,-46.0631,1.585)); +#244724 = LINE('',#244725,#244726); +#244725 = CARTESIAN_POINT('',(131.49165,-46.0631,1.585)); +#244726 = VECTOR('',#244727,1.); +#244727 = DIRECTION('',(1.,0.,0.)); +#244728 = ORIENTED_EDGE('',*,*,#244729,.T.); +#244729 = EDGE_CURVE('',#244722,#244730,#244732,.T.); +#244730 = VERTEX_POINT('',#244731); +#244731 = CARTESIAN_POINT('',(132.19165,-44.6831,1.585)); +#244732 = LINE('',#244733,#244734); +#244733 = CARTESIAN_POINT('',(132.19165,-46.0631,1.585)); +#244734 = VECTOR('',#244735,1.); +#244735 = DIRECTION('',(0.,1.,0.)); +#244736 = ORIENTED_EDGE('',*,*,#244737,.T.); +#244737 = EDGE_CURVE('',#244730,#244738,#244740,.T.); +#244738 = VERTEX_POINT('',#244739); +#244739 = CARTESIAN_POINT('',(130.44165,-44.6831,1.585)); +#244740 = LINE('',#244741,#244742); +#244741 = CARTESIAN_POINT('',(132.19165,-44.6831,1.585)); +#244742 = VECTOR('',#244743,1.); +#244743 = DIRECTION('',(-1.,0.,0.)); +#244744 = ORIENTED_EDGE('',*,*,#244745,.T.); +#244745 = EDGE_CURVE('',#244738,#244746,#244748,.T.); +#244746 = VERTEX_POINT('',#244747); +#244747 = CARTESIAN_POINT('',(130.38165,-44.6231,1.585)); +#244748 = CIRCLE('',#244749,5.999932016259E-02); +#244749 = AXIS2_PLACEMENT_3D('',#244750,#244751,#244752); +#244750 = CARTESIAN_POINT('',(130.44164932015,-44.62310067984,1.585)); +#244751 = DIRECTION('',(0.,0.,-1.)); +#244752 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#244753 = ORIENTED_EDGE('',*,*,#244754,.T.); +#244754 = EDGE_CURVE('',#244746,#244755,#244757,.T.); +#244755 = VERTEX_POINT('',#244756); +#244756 = CARTESIAN_POINT('',(130.38165,-43.9231,1.585)); +#244757 = LINE('',#244758,#244759); +#244758 = CARTESIAN_POINT('',(130.38165,-44.6231,1.585)); +#244759 = VECTOR('',#244760,1.); +#244760 = DIRECTION('',(0.,1.,0.)); +#244761 = ORIENTED_EDGE('',*,*,#244762,.T.); +#244762 = EDGE_CURVE('',#244755,#244763,#244765,.T.); +#244763 = VERTEX_POINT('',#244764); +#244764 = CARTESIAN_POINT('',(129.00165,-43.9231,1.585)); +#244765 = LINE('',#244766,#244767); +#244766 = CARTESIAN_POINT('',(130.38165,-43.9231,1.585)); +#244767 = VECTOR('',#244768,1.); +#244768 = DIRECTION('',(-1.,0.,0.)); +#244769 = ORIENTED_EDGE('',*,*,#244770,.T.); +#244770 = EDGE_CURVE('',#244763,#244771,#244773,.T.); +#244771 = VERTEX_POINT('',#244772); +#244772 = CARTESIAN_POINT('',(129.00165,-44.6231,1.585)); +#244773 = LINE('',#244774,#244775); +#244774 = CARTESIAN_POINT('',(129.00165,-43.9231,1.585)); +#244775 = VECTOR('',#244776,1.); +#244776 = DIRECTION('',(0.,-1.,0.)); +#244777 = ORIENTED_EDGE('',*,*,#244778,.T.); +#244778 = EDGE_CURVE('',#244771,#244779,#244781,.T.); +#244779 = VERTEX_POINT('',#244780); +#244780 = CARTESIAN_POINT('',(128.94165,-44.6831,1.585)); +#244781 = CIRCLE('',#244782,5.999932016262E-02); +#244782 = AXIS2_PLACEMENT_3D('',#244783,#244784,#244785); +#244783 = CARTESIAN_POINT('',(128.94165067984,-44.62310067984,1.585)); +#244784 = DIRECTION('',(0.,0.,-1.)); +#244785 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#244786 = ORIENTED_EDGE('',*,*,#244787,.T.); +#244787 = EDGE_CURVE('',#244779,#244612,#244788,.T.); +#244788 = LINE('',#244789,#244790); +#244789 = CARTESIAN_POINT('',(128.94165,-44.6831,1.585)); +#244790 = VECTOR('',#244791,1.); +#244791 = DIRECTION('',(-1.,0.,0.)); +#244792 = FACE_BOUND('',#244793,.F.); +#244793 = EDGE_LOOP('',(#244794,#244804,#244812,#244820)); +#244794 = ORIENTED_EDGE('',*,*,#244795,.T.); +#244795 = EDGE_CURVE('',#244796,#244798,#244800,.T.); +#244796 = VERTEX_POINT('',#244797); +#244797 = CARTESIAN_POINT('',(126.38165,-44.5631,1.585)); +#244798 = VERTEX_POINT('',#244799); +#244799 = CARTESIAN_POINT('',(126.38165,-43.9331,1.585)); +#244800 = LINE('',#244801,#244802); +#244801 = CARTESIAN_POINT('',(126.38165,-44.5631,1.585)); +#244802 = VECTOR('',#244803,1.); +#244803 = DIRECTION('',(0.,1.,0.)); +#244804 = ORIENTED_EDGE('',*,*,#244805,.T.); +#244805 = EDGE_CURVE('',#244798,#244806,#244808,.T.); +#244806 = VERTEX_POINT('',#244807); +#244807 = CARTESIAN_POINT('',(124.70165,-43.9331,1.585)); +#244808 = LINE('',#244809,#244810); +#244809 = CARTESIAN_POINT('',(126.38165,-43.9331,1.585)); +#244810 = VECTOR('',#244811,1.); +#244811 = DIRECTION('',(-1.,0.,0.)); +#244812 = ORIENTED_EDGE('',*,*,#244813,.T.); +#244813 = EDGE_CURVE('',#244806,#244814,#244816,.T.); +#244814 = VERTEX_POINT('',#244815); +#244815 = CARTESIAN_POINT('',(124.70165,-44.5631,1.585)); +#244816 = LINE('',#244817,#244818); +#244817 = CARTESIAN_POINT('',(124.70165,-43.9331,1.585)); +#244818 = VECTOR('',#244819,1.); +#244819 = DIRECTION('',(0.,-1.,0.)); +#244820 = ORIENTED_EDGE('',*,*,#244821,.T.); +#244821 = EDGE_CURVE('',#244814,#244796,#244822,.T.); +#244822 = LINE('',#244823,#244824); +#244823 = CARTESIAN_POINT('',(124.70165,-44.5631,1.585)); +#244824 = VECTOR('',#244825,1.); +#244825 = DIRECTION('',(1.,0.,0.)); +#244826 = FACE_BOUND('',#244827,.F.); +#244827 = EDGE_LOOP('',(#244828,#244838,#244846,#244854)); +#244828 = ORIENTED_EDGE('',*,*,#244829,.T.); +#244829 = EDGE_CURVE('',#244830,#244832,#244834,.T.); +#244830 = VERTEX_POINT('',#244831); +#244831 = CARTESIAN_POINT('',(128.88165,-44.5631,1.585)); +#244832 = VERTEX_POINT('',#244833); +#244833 = CARTESIAN_POINT('',(128.88165,-43.9331,1.585)); +#244834 = LINE('',#244835,#244836); +#244835 = CARTESIAN_POINT('',(128.88165,-44.5631,1.585)); +#244836 = VECTOR('',#244837,1.); +#244837 = DIRECTION('',(0.,1.,0.)); +#244838 = ORIENTED_EDGE('',*,*,#244839,.T.); +#244839 = EDGE_CURVE('',#244832,#244840,#244842,.T.); +#244840 = VERTEX_POINT('',#244841); +#244841 = CARTESIAN_POINT('',(128.00165,-43.9331,1.585)); +#244842 = LINE('',#244843,#244844); +#244843 = CARTESIAN_POINT('',(128.88165,-43.9331,1.585)); +#244844 = VECTOR('',#244845,1.); +#244845 = DIRECTION('',(-1.,0.,0.)); +#244846 = ORIENTED_EDGE('',*,*,#244847,.T.); +#244847 = EDGE_CURVE('',#244840,#244848,#244850,.T.); +#244848 = VERTEX_POINT('',#244849); +#244849 = CARTESIAN_POINT('',(128.00165,-44.5631,1.585)); +#244850 = LINE('',#244851,#244852); +#244851 = CARTESIAN_POINT('',(128.00165,-43.9331,1.585)); +#244852 = VECTOR('',#244853,1.); +#244853 = DIRECTION('',(0.,-1.,0.)); +#244854 = ORIENTED_EDGE('',*,*,#244855,.T.); +#244855 = EDGE_CURVE('',#244848,#244830,#244856,.T.); +#244856 = LINE('',#244857,#244858); +#244857 = CARTESIAN_POINT('',(128.00165,-44.5631,1.585)); +#244858 = VECTOR('',#244859,1.); +#244859 = DIRECTION('',(1.,0.,0.)); +#244860 = FACE_BOUND('',#244861,.F.); +#244861 = EDGE_LOOP('',(#244862,#244872,#244880,#244888)); +#244862 = ORIENTED_EDGE('',*,*,#244863,.T.); +#244863 = EDGE_CURVE('',#244864,#244866,#244868,.T.); +#244864 = VERTEX_POINT('',#244865); +#244865 = CARTESIAN_POINT('',(132.18165,-44.5631,1.585)); +#244866 = VERTEX_POINT('',#244867); +#244867 = CARTESIAN_POINT('',(132.18165,-43.9331,1.585)); +#244868 = LINE('',#244869,#244870); +#244869 = CARTESIAN_POINT('',(132.18165,-44.5631,1.585)); +#244870 = VECTOR('',#244871,1.); +#244871 = DIRECTION('',(0.,1.,0.)); +#244872 = ORIENTED_EDGE('',*,*,#244873,.T.); +#244873 = EDGE_CURVE('',#244866,#244874,#244876,.T.); +#244874 = VERTEX_POINT('',#244875); +#244875 = CARTESIAN_POINT('',(130.50165,-43.9331,1.585)); +#244876 = LINE('',#244877,#244878); +#244877 = CARTESIAN_POINT('',(132.18165,-43.9331,1.585)); +#244878 = VECTOR('',#244879,1.); +#244879 = DIRECTION('',(-1.,0.,0.)); +#244880 = ORIENTED_EDGE('',*,*,#244881,.T.); +#244881 = EDGE_CURVE('',#244874,#244882,#244884,.T.); +#244882 = VERTEX_POINT('',#244883); +#244883 = CARTESIAN_POINT('',(130.50165,-44.5631,1.585)); +#244884 = LINE('',#244885,#244886); +#244885 = CARTESIAN_POINT('',(130.50165,-43.9331,1.585)); +#244886 = VECTOR('',#244887,1.); +#244887 = DIRECTION('',(0.,-1.,0.)); +#244888 = ORIENTED_EDGE('',*,*,#244889,.T.); +#244889 = EDGE_CURVE('',#244882,#244864,#244890,.T.); +#244890 = LINE('',#244891,#244892); +#244891 = CARTESIAN_POINT('',(130.50165,-44.5631,1.585)); +#244892 = VECTOR('',#244893,1.); +#244893 = DIRECTION('',(1.,0.,0.)); +#244894 = PLANE('',#244895); +#244895 = AXIS2_PLACEMENT_3D('',#244896,#244897,#244898); +#244896 = CARTESIAN_POINT('',(0.,0.,1.585)); +#244897 = DIRECTION('',(0.,0.,1.)); +#244898 = DIRECTION('',(1.,0.,-0.)); +#244899 = SHELL_BASED_SURFACE_MODEL('',(#244900)); +#244900 = OPEN_SHELL('',(#244901)); +#244901 = ADVANCED_FACE('',(#244902,#244972,#245056,#245240,#245274, + #245308),#245342,.T.); +#244902 = FACE_BOUND('',#244903,.F.); +#244903 = EDGE_LOOP('',(#244904,#244915,#244923,#244932,#244940,#244949, + #244957,#244966)); +#244904 = ORIENTED_EDGE('',*,*,#244905,.T.); +#244905 = EDGE_CURVE('',#244906,#244908,#244910,.T.); +#244906 = VERTEX_POINT('',#244907); +#244907 = CARTESIAN_POINT('',(133.17165,-43.8631,1.585)); +#244908 = VERTEX_POINT('',#244909); +#244909 = CARTESIAN_POINT('',(133.23165,-43.8031,1.585)); +#244910 = CIRCLE('',#244911,5.999932016262E-02); +#244911 = AXIS2_PLACEMENT_3D('',#244912,#244913,#244914); +#244912 = CARTESIAN_POINT('',(133.23164932015,-43.86309932015,1.585)); +#244913 = DIRECTION('',(0.,0.,-1.)); +#244914 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#244915 = ORIENTED_EDGE('',*,*,#244916,.T.); +#244916 = EDGE_CURVE('',#244908,#244917,#244919,.T.); +#244917 = VERTEX_POINT('',#244918); +#244918 = CARTESIAN_POINT('',(140.85165,-43.8031,1.585)); +#244919 = LINE('',#244920,#244921); +#244920 = CARTESIAN_POINT('',(133.23165,-43.8031,1.585)); +#244921 = VECTOR('',#244922,1.); +#244922 = DIRECTION('',(1.,0.,0.)); +#244923 = ORIENTED_EDGE('',*,*,#244924,.T.); +#244924 = EDGE_CURVE('',#244917,#244925,#244927,.T.); +#244925 = VERTEX_POINT('',#244926); +#244926 = CARTESIAN_POINT('',(140.91165,-43.8631,1.585)); +#244927 = CIRCLE('',#244928,5.999932016261E-02); +#244928 = AXIS2_PLACEMENT_3D('',#244929,#244930,#244931); +#244929 = CARTESIAN_POINT('',(140.85165067984,-43.86309932015,1.585)); +#244930 = DIRECTION('',(0.,0.,-1.)); +#244931 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#244932 = ORIENTED_EDGE('',*,*,#244933,.T.); +#244933 = EDGE_CURVE('',#244925,#244934,#244936,.T.); +#244934 = VERTEX_POINT('',#244935); +#244935 = CARTESIAN_POINT('',(140.91165,-49.8331,1.585)); +#244936 = LINE('',#244937,#244938); +#244937 = CARTESIAN_POINT('',(140.91165,-43.8631,1.585)); +#244938 = VECTOR('',#244939,1.); +#244939 = DIRECTION('',(0.,-1.,0.)); +#244940 = ORIENTED_EDGE('',*,*,#244941,.T.); +#244941 = EDGE_CURVE('',#244934,#244942,#244944,.T.); +#244942 = VERTEX_POINT('',#244943); +#244943 = CARTESIAN_POINT('',(140.85165,-49.8931,1.585)); +#244944 = CIRCLE('',#244945,5.999932016262E-02); +#244945 = AXIS2_PLACEMENT_3D('',#244946,#244947,#244948); +#244946 = CARTESIAN_POINT('',(140.85165067984,-49.83310067984,1.585)); +#244947 = DIRECTION('',(0.,0.,-1.)); +#244948 = DIRECTION('',(0.999999999936,1.133081541087E-05,0.)); +#244949 = ORIENTED_EDGE('',*,*,#244950,.T.); +#244950 = EDGE_CURVE('',#244942,#244951,#244953,.T.); +#244951 = VERTEX_POINT('',#244952); +#244952 = CARTESIAN_POINT('',(133.23165,-49.8931,1.585)); +#244953 = LINE('',#244954,#244955); +#244954 = CARTESIAN_POINT('',(140.85165,-49.8931,1.585)); +#244955 = VECTOR('',#244956,1.); +#244956 = DIRECTION('',(-1.,0.,0.)); +#244957 = ORIENTED_EDGE('',*,*,#244958,.T.); +#244958 = EDGE_CURVE('',#244951,#244959,#244961,.T.); +#244959 = VERTEX_POINT('',#244960); +#244960 = CARTESIAN_POINT('',(133.17165,-49.8331,1.585)); +#244961 = CIRCLE('',#244962,5.999932016257E-02); +#244962 = AXIS2_PLACEMENT_3D('',#244963,#244964,#244965); +#244963 = CARTESIAN_POINT('',(133.23164932015,-49.83310067984,1.585)); +#244964 = DIRECTION('',(0.,0.,-1.)); +#244965 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#244966 = ORIENTED_EDGE('',*,*,#244967,.T.); +#244967 = EDGE_CURVE('',#244959,#244906,#244968,.T.); +#244968 = LINE('',#244969,#244970); +#244969 = CARTESIAN_POINT('',(133.17165,-49.8331,1.585)); +#244970 = VECTOR('',#244971,1.); +#244971 = DIRECTION('',(0.,1.,0.)); +#244972 = FACE_BOUND('',#244973,.F.); +#244973 = EDGE_LOOP('',(#244974,#244985,#244993,#245001,#245009,#245017, + #245025,#245033,#245041,#245050)); +#244974 = ORIENTED_EDGE('',*,*,#244975,.T.); +#244975 = EDGE_CURVE('',#244976,#244978,#244980,.T.); +#244976 = VERTEX_POINT('',#244977); +#244977 = CARTESIAN_POINT('',(133.99165,-49.1331,1.585)); +#244978 = VERTEX_POINT('',#244979); +#244979 = CARTESIAN_POINT('',(133.93165,-49.0731,1.585)); +#244980 = CIRCLE('',#244981,5.999932016261E-02); +#244981 = AXIS2_PLACEMENT_3D('',#244982,#244983,#244984); +#244982 = CARTESIAN_POINT('',(133.99164932015,-49.07310067984,1.585)); +#244983 = DIRECTION('',(0.,0.,-1.)); +#244984 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#244985 = ORIENTED_EDGE('',*,*,#244986,.T.); +#244986 = EDGE_CURVE('',#244978,#244987,#244989,.T.); +#244987 = VERTEX_POINT('',#244988); +#244988 = CARTESIAN_POINT('',(133.93165,-46.1831,1.585)); +#244989 = LINE('',#244990,#244991); +#244990 = CARTESIAN_POINT('',(133.93165,-49.0731,1.585)); +#244991 = VECTOR('',#244992,1.); +#244992 = DIRECTION('',(0.,1.,0.)); +#244993 = ORIENTED_EDGE('',*,*,#244994,.T.); +#244994 = EDGE_CURVE('',#244987,#244995,#244997,.T.); +#244995 = VERTEX_POINT('',#244996); +#244996 = CARTESIAN_POINT('',(133.29165,-46.1831,1.585)); +#244997 = LINE('',#244998,#244999); +#244998 = CARTESIAN_POINT('',(133.93165,-46.1831,1.585)); +#244999 = VECTOR('',#245000,1.); +#245000 = DIRECTION('',(-1.,0.,0.)); +#245001 = ORIENTED_EDGE('',*,*,#245002,.T.); +#245002 = EDGE_CURVE('',#244995,#245003,#245005,.T.); +#245003 = VERTEX_POINT('',#245004); +#245004 = CARTESIAN_POINT('',(133.29165,-49.7731,1.585)); +#245005 = LINE('',#245006,#245007); +#245006 = CARTESIAN_POINT('',(133.29165,-46.1831,1.585)); +#245007 = VECTOR('',#245008,1.); +#245008 = DIRECTION('',(0.,-1.,0.)); +#245009 = ORIENTED_EDGE('',*,*,#245010,.T.); +#245010 = EDGE_CURVE('',#245003,#245011,#245013,.T.); +#245011 = VERTEX_POINT('',#245012); +#245012 = CARTESIAN_POINT('',(140.79165,-49.7731,1.585)); +#245013 = LINE('',#245014,#245015); +#245014 = CARTESIAN_POINT('',(133.29165,-49.7731,1.585)); +#245015 = VECTOR('',#245016,1.); +#245016 = DIRECTION('',(1.,0.,0.)); +#245017 = ORIENTED_EDGE('',*,*,#245018,.T.); +#245018 = EDGE_CURVE('',#245011,#245019,#245021,.T.); +#245019 = VERTEX_POINT('',#245020); +#245020 = CARTESIAN_POINT('',(140.79165,-46.1831,1.585)); +#245021 = LINE('',#245022,#245023); +#245022 = CARTESIAN_POINT('',(140.79165,-49.7731,1.585)); +#245023 = VECTOR('',#245024,1.); +#245024 = DIRECTION('',(0.,1.,0.)); +#245025 = ORIENTED_EDGE('',*,*,#245026,.T.); +#245026 = EDGE_CURVE('',#245019,#245027,#245029,.T.); +#245027 = VERTEX_POINT('',#245028); +#245028 = CARTESIAN_POINT('',(140.15165,-46.1831,1.585)); +#245029 = LINE('',#245030,#245031); +#245030 = CARTESIAN_POINT('',(140.79165,-46.1831,1.585)); +#245031 = VECTOR('',#245032,1.); +#245032 = DIRECTION('',(-1.,0.,0.)); +#245033 = ORIENTED_EDGE('',*,*,#245034,.T.); +#245034 = EDGE_CURVE('',#245027,#245035,#245037,.T.); +#245035 = VERTEX_POINT('',#245036); +#245036 = CARTESIAN_POINT('',(140.15165,-49.0731,1.585)); +#245037 = LINE('',#245038,#245039); +#245038 = CARTESIAN_POINT('',(140.15165,-46.1831,1.585)); +#245039 = VECTOR('',#245040,1.); +#245040 = DIRECTION('',(0.,-1.,0.)); +#245041 = ORIENTED_EDGE('',*,*,#245042,.T.); +#245042 = EDGE_CURVE('',#245035,#245043,#245045,.T.); +#245043 = VERTEX_POINT('',#245044); +#245044 = CARTESIAN_POINT('',(140.09165,-49.1331,1.585)); +#245045 = CIRCLE('',#245046,5.999932016253E-02); +#245046 = AXIS2_PLACEMENT_3D('',#245047,#245048,#245049); +#245047 = CARTESIAN_POINT('',(140.09165067984,-49.07310067984,1.585)); +#245048 = DIRECTION('',(0.,0.,-1.)); +#245049 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#245050 = ORIENTED_EDGE('',*,*,#245051,.T.); +#245051 = EDGE_CURVE('',#245043,#244976,#245052,.T.); +#245052 = LINE('',#245053,#245054); +#245053 = CARTESIAN_POINT('',(140.09165,-49.1331,1.585)); +#245054 = VECTOR('',#245055,1.); +#245055 = DIRECTION('',(-1.,0.,0.)); +#245056 = FACE_BOUND('',#245057,.F.); +#245057 = EDGE_LOOP('',(#245058,#245069,#245077,#245085,#245093,#245102, + #245110,#245118,#245126,#245135,#245143,#245151,#245159,#245168, + #245176,#245184,#245192,#245201,#245209,#245217,#245225,#245234)); +#245058 = ORIENTED_EDGE('',*,*,#245059,.T.); +#245059 = EDGE_CURVE('',#245060,#245062,#245064,.T.); +#245060 = VERTEX_POINT('',#245061); +#245061 = CARTESIAN_POINT('',(136.54165,-44.6831,1.585)); +#245062 = VERTEX_POINT('',#245063); +#245063 = CARTESIAN_POINT('',(136.48165,-44.6231,1.585)); +#245064 = CIRCLE('',#245065,5.999932016259E-02); +#245065 = AXIS2_PLACEMENT_3D('',#245066,#245067,#245068); +#245066 = CARTESIAN_POINT('',(136.54164932015,-44.62310067984,1.585)); +#245067 = DIRECTION('',(0.,0.,-1.)); +#245068 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#245069 = ORIENTED_EDGE('',*,*,#245070,.T.); +#245070 = EDGE_CURVE('',#245062,#245071,#245073,.T.); +#245071 = VERTEX_POINT('',#245072); +#245072 = CARTESIAN_POINT('',(136.48165,-43.9231,1.585)); +#245073 = LINE('',#245074,#245075); +#245074 = CARTESIAN_POINT('',(136.48165,-44.6231,1.585)); +#245075 = VECTOR('',#245076,1.); +#245076 = DIRECTION('',(0.,1.,0.)); +#245077 = ORIENTED_EDGE('',*,*,#245078,.T.); +#245078 = EDGE_CURVE('',#245071,#245079,#245081,.T.); +#245079 = VERTEX_POINT('',#245080); +#245080 = CARTESIAN_POINT('',(135.10165,-43.9231,1.585)); +#245081 = LINE('',#245082,#245083); +#245082 = CARTESIAN_POINT('',(136.48165,-43.9231,1.585)); +#245083 = VECTOR('',#245084,1.); +#245084 = DIRECTION('',(-1.,0.,0.)); +#245085 = ORIENTED_EDGE('',*,*,#245086,.T.); +#245086 = EDGE_CURVE('',#245079,#245087,#245089,.T.); +#245087 = VERTEX_POINT('',#245088); +#245088 = CARTESIAN_POINT('',(135.10165,-44.6231,1.585)); +#245089 = LINE('',#245090,#245091); +#245090 = CARTESIAN_POINT('',(135.10165,-43.9231,1.585)); +#245091 = VECTOR('',#245092,1.); +#245092 = DIRECTION('',(0.,-1.,0.)); +#245093 = ORIENTED_EDGE('',*,*,#245094,.T.); +#245094 = EDGE_CURVE('',#245087,#245095,#245097,.T.); +#245095 = VERTEX_POINT('',#245096); +#245096 = CARTESIAN_POINT('',(135.04165,-44.6831,1.585)); +#245097 = CIRCLE('',#245098,5.999932016262E-02); +#245098 = AXIS2_PLACEMENT_3D('',#245099,#245100,#245101); +#245099 = CARTESIAN_POINT('',(135.04165067984,-44.62310067984,1.585)); +#245100 = DIRECTION('',(0.,0.,-1.)); +#245101 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#245102 = ORIENTED_EDGE('',*,*,#245103,.T.); +#245103 = EDGE_CURVE('',#245095,#245104,#245106,.T.); +#245104 = VERTEX_POINT('',#245105); +#245105 = CARTESIAN_POINT('',(133.29165,-44.6831,1.585)); +#245106 = LINE('',#245107,#245108); +#245107 = CARTESIAN_POINT('',(135.04165,-44.6831,1.585)); +#245108 = VECTOR('',#245109,1.); +#245109 = DIRECTION('',(-1.,0.,0.)); +#245110 = ORIENTED_EDGE('',*,*,#245111,.T.); +#245111 = EDGE_CURVE('',#245104,#245112,#245114,.T.); +#245112 = VERTEX_POINT('',#245113); +#245113 = CARTESIAN_POINT('',(133.29165,-46.0631,1.585)); +#245114 = LINE('',#245115,#245116); +#245115 = CARTESIAN_POINT('',(133.29165,-44.6831,1.585)); +#245116 = VECTOR('',#245117,1.); +#245117 = DIRECTION('',(0.,-1.,0.)); +#245118 = ORIENTED_EDGE('',*,*,#245119,.T.); +#245119 = EDGE_CURVE('',#245112,#245120,#245122,.T.); +#245120 = VERTEX_POINT('',#245121); +#245121 = CARTESIAN_POINT('',(133.99165,-46.0631,1.585)); +#245122 = LINE('',#245123,#245124); +#245123 = CARTESIAN_POINT('',(133.29165,-46.0631,1.585)); +#245124 = VECTOR('',#245125,1.); +#245125 = DIRECTION('',(1.,0.,0.)); +#245126 = ORIENTED_EDGE('',*,*,#245127,.T.); +#245127 = EDGE_CURVE('',#245120,#245128,#245130,.T.); +#245128 = VERTEX_POINT('',#245129); +#245129 = CARTESIAN_POINT('',(134.05165,-46.1231,1.585)); +#245130 = CIRCLE('',#245131,5.999932016259E-02); +#245131 = AXIS2_PLACEMENT_3D('',#245132,#245133,#245134); +#245132 = CARTESIAN_POINT('',(133.99165067984,-46.12309932015,1.585)); +#245133 = DIRECTION('',(0.,0.,-1.)); +#245134 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#245135 = ORIENTED_EDGE('',*,*,#245136,.T.); +#245136 = EDGE_CURVE('',#245128,#245137,#245139,.T.); +#245137 = VERTEX_POINT('',#245138); +#245138 = CARTESIAN_POINT('',(134.05165,-49.0131,1.585)); +#245139 = LINE('',#245140,#245141); +#245140 = CARTESIAN_POINT('',(134.05165,-46.1231,1.585)); +#245141 = VECTOR('',#245142,1.); +#245142 = DIRECTION('',(0.,-1.,0.)); +#245143 = ORIENTED_EDGE('',*,*,#245144,.T.); +#245144 = EDGE_CURVE('',#245137,#245145,#245147,.T.); +#245145 = VERTEX_POINT('',#245146); +#245146 = CARTESIAN_POINT('',(140.03165,-49.0131,1.585)); +#245147 = LINE('',#245148,#245149); +#245148 = CARTESIAN_POINT('',(134.05165,-49.0131,1.585)); +#245149 = VECTOR('',#245150,1.); +#245150 = DIRECTION('',(1.,0.,0.)); +#245151 = ORIENTED_EDGE('',*,*,#245152,.T.); +#245152 = EDGE_CURVE('',#245145,#245153,#245155,.T.); +#245153 = VERTEX_POINT('',#245154); +#245154 = CARTESIAN_POINT('',(140.03165,-46.1231,1.585)); +#245155 = LINE('',#245156,#245157); +#245156 = CARTESIAN_POINT('',(140.03165,-49.0131,1.585)); +#245157 = VECTOR('',#245158,1.); +#245158 = DIRECTION('',(0.,1.,0.)); +#245159 = ORIENTED_EDGE('',*,*,#245160,.T.); +#245160 = EDGE_CURVE('',#245153,#245161,#245163,.T.); +#245161 = VERTEX_POINT('',#245162); +#245162 = CARTESIAN_POINT('',(140.09165,-46.0631,1.585)); +#245163 = CIRCLE('',#245164,5.999932016254E-02); +#245164 = AXIS2_PLACEMENT_3D('',#245165,#245166,#245167); +#245165 = CARTESIAN_POINT('',(140.09164932015,-46.12309932015,1.585)); +#245166 = DIRECTION('',(0.,0.,-1.)); +#245167 = DIRECTION('',(-0.999999999936,-1.133081683199E-05,-0.)); +#245168 = ORIENTED_EDGE('',*,*,#245169,.T.); +#245169 = EDGE_CURVE('',#245161,#245170,#245172,.T.); +#245170 = VERTEX_POINT('',#245171); +#245171 = CARTESIAN_POINT('',(140.79165,-46.0631,1.585)); +#245172 = LINE('',#245173,#245174); +#245173 = CARTESIAN_POINT('',(140.09165,-46.0631,1.585)); +#245174 = VECTOR('',#245175,1.); +#245175 = DIRECTION('',(1.,0.,0.)); +#245176 = ORIENTED_EDGE('',*,*,#245177,.T.); +#245177 = EDGE_CURVE('',#245170,#245178,#245180,.T.); +#245178 = VERTEX_POINT('',#245179); +#245179 = CARTESIAN_POINT('',(140.79165,-44.6831,1.585)); +#245180 = LINE('',#245181,#245182); +#245181 = CARTESIAN_POINT('',(140.79165,-46.0631,1.585)); +#245182 = VECTOR('',#245183,1.); +#245183 = DIRECTION('',(0.,1.,0.)); +#245184 = ORIENTED_EDGE('',*,*,#245185,.T.); +#245185 = EDGE_CURVE('',#245178,#245186,#245188,.T.); +#245186 = VERTEX_POINT('',#245187); +#245187 = CARTESIAN_POINT('',(139.04165,-44.6831,1.585)); +#245188 = LINE('',#245189,#245190); +#245189 = CARTESIAN_POINT('',(140.79165,-44.6831,1.585)); +#245190 = VECTOR('',#245191,1.); +#245191 = DIRECTION('',(-1.,0.,0.)); +#245192 = ORIENTED_EDGE('',*,*,#245193,.T.); +#245193 = EDGE_CURVE('',#245186,#245194,#245196,.T.); +#245194 = VERTEX_POINT('',#245195); +#245195 = CARTESIAN_POINT('',(138.98165,-44.6231,1.585)); +#245196 = CIRCLE('',#245197,5.999932016259E-02); +#245197 = AXIS2_PLACEMENT_3D('',#245198,#245199,#245200); +#245198 = CARTESIAN_POINT('',(139.04164932015,-44.62310067984,1.585)); +#245199 = DIRECTION('',(0.,0.,-1.)); +#245200 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#245201 = ORIENTED_EDGE('',*,*,#245202,.T.); +#245202 = EDGE_CURVE('',#245194,#245203,#245205,.T.); +#245203 = VERTEX_POINT('',#245204); +#245204 = CARTESIAN_POINT('',(138.98165,-43.9231,1.585)); +#245205 = LINE('',#245206,#245207); +#245206 = CARTESIAN_POINT('',(138.98165,-44.6231,1.585)); +#245207 = VECTOR('',#245208,1.); +#245208 = DIRECTION('',(0.,1.,0.)); +#245209 = ORIENTED_EDGE('',*,*,#245210,.T.); +#245210 = EDGE_CURVE('',#245203,#245211,#245213,.T.); +#245211 = VERTEX_POINT('',#245212); +#245212 = CARTESIAN_POINT('',(137.60165,-43.9231,1.585)); +#245213 = LINE('',#245214,#245215); +#245214 = CARTESIAN_POINT('',(138.98165,-43.9231,1.585)); +#245215 = VECTOR('',#245216,1.); +#245216 = DIRECTION('',(-1.,0.,0.)); +#245217 = ORIENTED_EDGE('',*,*,#245218,.T.); +#245218 = EDGE_CURVE('',#245211,#245219,#245221,.T.); +#245219 = VERTEX_POINT('',#245220); +#245220 = CARTESIAN_POINT('',(137.60165,-44.6231,1.585)); +#245221 = LINE('',#245222,#245223); +#245222 = CARTESIAN_POINT('',(137.60165,-43.9231,1.585)); +#245223 = VECTOR('',#245224,1.); +#245224 = DIRECTION('',(0.,-1.,0.)); +#245225 = ORIENTED_EDGE('',*,*,#245226,.T.); +#245226 = EDGE_CURVE('',#245219,#245227,#245229,.T.); +#245227 = VERTEX_POINT('',#245228); +#245228 = CARTESIAN_POINT('',(137.54165,-44.6831,1.585)); +#245229 = CIRCLE('',#245230,5.999932016262E-02); +#245230 = AXIS2_PLACEMENT_3D('',#245231,#245232,#245233); +#245231 = CARTESIAN_POINT('',(137.54165067984,-44.62310067984,1.585)); +#245232 = DIRECTION('',(0.,0.,-1.)); +#245233 = DIRECTION('',(0.999999999936,1.133081552929E-05,0.)); +#245234 = ORIENTED_EDGE('',*,*,#245235,.T.); +#245235 = EDGE_CURVE('',#245227,#245060,#245236,.T.); +#245236 = LINE('',#245237,#245238); +#245237 = CARTESIAN_POINT('',(137.54165,-44.6831,1.585)); +#245238 = VECTOR('',#245239,1.); +#245239 = DIRECTION('',(-1.,0.,0.)); +#245240 = FACE_BOUND('',#245241,.F.); +#245241 = EDGE_LOOP('',(#245242,#245252,#245260,#245268)); +#245242 = ORIENTED_EDGE('',*,*,#245243,.T.); +#245243 = EDGE_CURVE('',#245244,#245246,#245248,.T.); +#245244 = VERTEX_POINT('',#245245); +#245245 = CARTESIAN_POINT('',(134.98165,-44.5631,1.585)); +#245246 = VERTEX_POINT('',#245247); +#245247 = CARTESIAN_POINT('',(134.98165,-43.9331,1.585)); +#245248 = LINE('',#245249,#245250); +#245249 = CARTESIAN_POINT('',(134.98165,-44.5631,1.585)); +#245250 = VECTOR('',#245251,1.); +#245251 = DIRECTION('',(0.,1.,0.)); +#245252 = ORIENTED_EDGE('',*,*,#245253,.T.); +#245253 = EDGE_CURVE('',#245246,#245254,#245256,.T.); +#245254 = VERTEX_POINT('',#245255); +#245255 = CARTESIAN_POINT('',(133.30165,-43.9331,1.585)); +#245256 = LINE('',#245257,#245258); +#245257 = CARTESIAN_POINT('',(134.98165,-43.9331,1.585)); +#245258 = VECTOR('',#245259,1.); +#245259 = DIRECTION('',(-1.,0.,0.)); +#245260 = ORIENTED_EDGE('',*,*,#245261,.T.); +#245261 = EDGE_CURVE('',#245254,#245262,#245264,.T.); +#245262 = VERTEX_POINT('',#245263); +#245263 = CARTESIAN_POINT('',(133.30165,-44.5631,1.585)); +#245264 = LINE('',#245265,#245266); +#245265 = CARTESIAN_POINT('',(133.30165,-43.9331,1.585)); +#245266 = VECTOR('',#245267,1.); +#245267 = DIRECTION('',(0.,-1.,0.)); +#245268 = ORIENTED_EDGE('',*,*,#245269,.T.); +#245269 = EDGE_CURVE('',#245262,#245244,#245270,.T.); +#245270 = LINE('',#245271,#245272); +#245271 = CARTESIAN_POINT('',(133.30165,-44.5631,1.585)); +#245272 = VECTOR('',#245273,1.); +#245273 = DIRECTION('',(1.,0.,0.)); +#245274 = FACE_BOUND('',#245275,.F.); +#245275 = EDGE_LOOP('',(#245276,#245286,#245294,#245302)); +#245276 = ORIENTED_EDGE('',*,*,#245277,.T.); +#245277 = EDGE_CURVE('',#245278,#245280,#245282,.T.); +#245278 = VERTEX_POINT('',#245279); +#245279 = CARTESIAN_POINT('',(137.48165,-44.5631,1.585)); +#245280 = VERTEX_POINT('',#245281); +#245281 = CARTESIAN_POINT('',(137.48165,-43.9331,1.585)); +#245282 = LINE('',#245283,#245284); +#245283 = CARTESIAN_POINT('',(137.48165,-44.5631,1.585)); +#245284 = VECTOR('',#245285,1.); +#245285 = DIRECTION('',(0.,1.,0.)); +#245286 = ORIENTED_EDGE('',*,*,#245287,.T.); +#245287 = EDGE_CURVE('',#245280,#245288,#245290,.T.); +#245288 = VERTEX_POINT('',#245289); +#245289 = CARTESIAN_POINT('',(136.60165,-43.9331,1.585)); +#245290 = LINE('',#245291,#245292); +#245291 = CARTESIAN_POINT('',(137.48165,-43.9331,1.585)); +#245292 = VECTOR('',#245293,1.); +#245293 = DIRECTION('',(-1.,0.,0.)); +#245294 = ORIENTED_EDGE('',*,*,#245295,.T.); +#245295 = EDGE_CURVE('',#245288,#245296,#245298,.T.); +#245296 = VERTEX_POINT('',#245297); +#245297 = CARTESIAN_POINT('',(136.60165,-44.5631,1.585)); +#245298 = LINE('',#245299,#245300); +#245299 = CARTESIAN_POINT('',(136.60165,-43.9331,1.585)); +#245300 = VECTOR('',#245301,1.); +#245301 = DIRECTION('',(0.,-1.,0.)); +#245302 = ORIENTED_EDGE('',*,*,#245303,.T.); +#245303 = EDGE_CURVE('',#245296,#245278,#245304,.T.); +#245304 = LINE('',#245305,#245306); +#245305 = CARTESIAN_POINT('',(136.60165,-44.5631,1.585)); +#245306 = VECTOR('',#245307,1.); +#245307 = DIRECTION('',(1.,0.,0.)); +#245308 = FACE_BOUND('',#245309,.F.); +#245309 = EDGE_LOOP('',(#245310,#245320,#245328,#245336)); +#245310 = ORIENTED_EDGE('',*,*,#245311,.T.); +#245311 = EDGE_CURVE('',#245312,#245314,#245316,.T.); +#245312 = VERTEX_POINT('',#245313); +#245313 = CARTESIAN_POINT('',(140.78165,-44.5631,1.585)); +#245314 = VERTEX_POINT('',#245315); +#245315 = CARTESIAN_POINT('',(140.78165,-43.9331,1.585)); +#245316 = LINE('',#245317,#245318); +#245317 = CARTESIAN_POINT('',(140.78165,-44.5631,1.585)); +#245318 = VECTOR('',#245319,1.); +#245319 = DIRECTION('',(0.,1.,0.)); +#245320 = ORIENTED_EDGE('',*,*,#245321,.T.); +#245321 = EDGE_CURVE('',#245314,#245322,#245324,.T.); +#245322 = VERTEX_POINT('',#245323); +#245323 = CARTESIAN_POINT('',(139.10165,-43.9331,1.585)); +#245324 = LINE('',#245325,#245326); +#245325 = CARTESIAN_POINT('',(140.78165,-43.9331,1.585)); +#245326 = VECTOR('',#245327,1.); +#245327 = DIRECTION('',(-1.,0.,0.)); +#245328 = ORIENTED_EDGE('',*,*,#245329,.T.); +#245329 = EDGE_CURVE('',#245322,#245330,#245332,.T.); +#245330 = VERTEX_POINT('',#245331); +#245331 = CARTESIAN_POINT('',(139.10165,-44.5631,1.585)); +#245332 = LINE('',#245333,#245334); +#245333 = CARTESIAN_POINT('',(139.10165,-43.9331,1.585)); +#245334 = VECTOR('',#245335,1.); +#245335 = DIRECTION('',(0.,-1.,0.)); +#245336 = ORIENTED_EDGE('',*,*,#245337,.T.); +#245337 = EDGE_CURVE('',#245330,#245312,#245338,.T.); +#245338 = LINE('',#245339,#245340); +#245339 = CARTESIAN_POINT('',(139.10165,-44.5631,1.585)); +#245340 = VECTOR('',#245341,1.); +#245341 = DIRECTION('',(1.,0.,0.)); +#245342 = PLANE('',#245343); +#245343 = AXIS2_PLACEMENT_3D('',#245344,#245345,#245346); +#245344 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245345 = DIRECTION('',(0.,0.,1.)); +#245346 = DIRECTION('',(1.,0.,-0.)); +#245347 = SHELL_BASED_SURFACE_MODEL('',(#245348)); +#245348 = OPEN_SHELL('',(#245349)); +#245349 = ADVANCED_FACE('',(#245350),#245493,.T.); +#245350 = FACE_BOUND('',#245351,.F.); +#245351 = EDGE_LOOP('',(#245352,#245362,#245370,#245378,#245387,#245395, + #245403,#245412,#245420,#245428,#245437,#245445,#245453,#245462, + #245470,#245479,#245487)); +#245352 = ORIENTED_EDGE('',*,*,#245353,.T.); +#245353 = EDGE_CURVE('',#245354,#245356,#245358,.T.); +#245354 = VERTEX_POINT('',#245355); +#245355 = CARTESIAN_POINT('',(84.389335,-48.470572,1.585)); +#245356 = VERTEX_POINT('',#245357); +#245357 = CARTESIAN_POINT('',(84.412175,-48.449656,1.585)); +#245358 = LINE('',#245359,#245360); +#245359 = CARTESIAN_POINT('',(84.389335,-48.470572,1.585)); +#245360 = VECTOR('',#245361,1.); +#245361 = DIRECTION('',(0.737486447509,0.675361932404,0.)); +#245362 = ORIENTED_EDGE('',*,*,#245363,.T.); +#245363 = EDGE_CURVE('',#245356,#245364,#245366,.T.); +#245364 = VERTEX_POINT('',#245365); +#245365 = CARTESIAN_POINT('',(84.441282,-48.439071,1.585)); +#245366 = LINE('',#245367,#245368); +#245367 = CARTESIAN_POINT('',(84.412175,-48.449656,1.585)); +#245368 = VECTOR('',#245369,1.); +#245369 = DIRECTION('',(0.939786824446,0.341761209907,0.)); +#245370 = ORIENTED_EDGE('',*,*,#245371,.T.); +#245371 = EDGE_CURVE('',#245364,#245372,#245374,.T.); +#245372 = VERTEX_POINT('',#245373); +#245373 = CARTESIAN_POINT('',(84.455046,-48.439676,1.585)); +#245374 = LINE('',#245375,#245376); +#245375 = CARTESIAN_POINT('',(84.441282,-48.439071,1.585)); +#245376 = VECTOR('',#245377,1.); +#245377 = DIRECTION('',(0.99903536577,-4.39128448337E-02,0.)); +#245378 = ORIENTED_EDGE('',*,*,#245379,.T.); +#245379 = EDGE_CURVE('',#245372,#245380,#245382,.T.); +#245380 = VERTEX_POINT('',#245381); +#245381 = CARTESIAN_POINT('',(84.525908,-48.489307,1.585)); +#245382 = CIRCLE('',#245383,7.786403695727E-02); +#245383 = AXIS2_PLACEMENT_3D('',#245384,#245385,#245386); +#245384 = CARTESIAN_POINT('',(84.453335522407,-48.51752124723,1.585)); +#245385 = DIRECTION('',(0.,0.,-1.)); +#245386 = DIRECTION('',(2.196749179859E-02,0.999758685536,0.)); +#245387 = ORIENTED_EDGE('',*,*,#245388,.T.); +#245388 = EDGE_CURVE('',#245380,#245389,#245391,.T.); +#245389 = VERTEX_POINT('',#245390); +#245390 = CARTESIAN_POINT('',(84.532708,-48.517526,1.585)); +#245391 = LINE('',#245392,#245393); +#245392 = CARTESIAN_POINT('',(84.525908,-48.489307,1.585)); +#245393 = VECTOR('',#245394,1.); +#245394 = DIRECTION('',(0.234266703205,-0.972172367314,0.)); +#245395 = ORIENTED_EDGE('',*,*,#245396,.T.); +#245396 = EDGE_CURVE('',#245389,#245397,#245399,.T.); +#245397 = VERTEX_POINT('',#245398); +#245398 = CARTESIAN_POINT('',(84.531183,-49.803011,1.585)); +#245399 = LINE('',#245400,#245401); +#245400 = CARTESIAN_POINT('',(84.532708,-48.517526,1.585)); +#245401 = VECTOR('',#245402,1.); +#245402 = DIRECTION('',(-1.186321837197E-03,-0.99999929632,0.)); +#245403 = ORIENTED_EDGE('',*,*,#245404,.T.); +#245404 = EDGE_CURVE('',#245397,#245405,#245407,.T.); +#245405 = VERTEX_POINT('',#245406); +#245406 = CARTESIAN_POINT('',(84.375483,-49.803011,1.585)); +#245407 = CIRCLE('',#245408,7.937510771646E-02); +#245408 = AXIS2_PLACEMENT_3D('',#245409,#245410,#245411); +#245409 = CARTESIAN_POINT('',(84.453333,-49.787526,1.585)); +#245410 = DIRECTION('',(-0.,0.,-1.)); +#245411 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245412 = ORIENTED_EDGE('',*,*,#245413,.T.); +#245413 = EDGE_CURVE('',#245405,#245414,#245416,.T.); +#245414 = VERTEX_POINT('',#245415); +#245415 = CARTESIAN_POINT('',(84.373958,-48.875314,1.585)); +#245416 = LINE('',#245417,#245418); +#245417 = CARTESIAN_POINT('',(84.375483,-49.803011,1.585)); +#245418 = VECTOR('',#245419,1.); +#245419 = DIRECTION('',(-1.643853477515E-03,0.999998648872,0.)); +#245420 = ORIENTED_EDGE('',*,*,#245421,.T.); +#245421 = EDGE_CURVE('',#245414,#245422,#245424,.T.); +#245422 = VERTEX_POINT('',#245423); +#245423 = CARTESIAN_POINT('',(84.093998,-49.471623,1.585)); +#245424 = LINE('',#245425,#245426); +#245425 = CARTESIAN_POINT('',(84.373958,-48.875314,1.585)); +#245426 = VECTOR('',#245427,1.); +#245427 = DIRECTION('',(-0.424981594141,-0.905201991072,0.)); +#245428 = ORIENTED_EDGE('',*,*,#245429,.T.); +#245429 = EDGE_CURVE('',#245422,#245430,#245432,.T.); +#245430 = VERTEX_POINT('',#245431); +#245431 = CARTESIAN_POINT('',(83.958072,-49.458235,1.585)); +#245432 = CIRCLE('',#245433,7.937464557818E-02); +#245433 = AXIS2_PLACEMENT_3D('',#245434,#245435,#245436); +#245434 = CARTESIAN_POINT('',(84.030000355023,-49.42466945063,1.585)); +#245435 = DIRECTION('',(-0.,0.,-1.)); +#245436 = DIRECTION('',(0.806273143147,-0.591543420755,-0.)); +#245437 = ORIENTED_EDGE('',*,*,#245438,.T.); +#245438 = EDGE_CURVE('',#245430,#245439,#245441,.T.); +#245439 = VERTEX_POINT('',#245440); +#245440 = CARTESIAN_POINT('',(83.686041,-48.875312,1.585)); +#245441 = LINE('',#245442,#245443); +#245442 = CARTESIAN_POINT('',(83.958072,-49.458235,1.585)); +#245443 = VECTOR('',#245444,1.); +#245444 = DIRECTION('',(-0.422885805744,0.906182981136,0.)); +#245445 = ORIENTED_EDGE('',*,*,#245446,.T.); +#245446 = EDGE_CURVE('',#245439,#245447,#245449,.T.); +#245447 = VERTEX_POINT('',#245448); +#245448 = CARTESIAN_POINT('',(83.684516,-49.803011,1.585)); +#245449 = LINE('',#245450,#245451); +#245450 = CARTESIAN_POINT('',(83.686041,-48.875312,1.585)); +#245451 = VECTOR('',#245452,1.); +#245452 = DIRECTION('',(-1.643849933588E-03,-0.999998648878,0.)); +#245453 = ORIENTED_EDGE('',*,*,#245454,.T.); +#245454 = EDGE_CURVE('',#245447,#245455,#245457,.T.); +#245455 = VERTEX_POINT('',#245456); +#245456 = CARTESIAN_POINT('',(83.528816,-49.803011,1.585)); +#245457 = CIRCLE('',#245458,7.937510771646E-02); +#245458 = AXIS2_PLACEMENT_3D('',#245459,#245460,#245461); +#245459 = CARTESIAN_POINT('',(83.606666,-49.787526,1.585)); +#245460 = DIRECTION('',(-0.,0.,-1.)); +#245461 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245462 = ORIENTED_EDGE('',*,*,#245463,.T.); +#245463 = EDGE_CURVE('',#245455,#245464,#245466,.T.); +#245464 = VERTEX_POINT('',#245465); +#245465 = CARTESIAN_POINT('',(83.528816,-48.502041,1.585)); +#245466 = LINE('',#245467,#245468); +#245467 = CARTESIAN_POINT('',(83.528816,-49.803011,1.585)); +#245468 = VECTOR('',#245469,1.); +#245469 = DIRECTION('',(0.,1.,0.)); +#245470 = ORIENTED_EDGE('',*,*,#245471,.T.); +#245471 = EDGE_CURVE('',#245464,#245472,#245474,.T.); +#245472 = VERTEX_POINT('',#245473); +#245473 = CARTESIAN_POINT('',(83.678594,-48.483959,1.585)); +#245474 = CIRCLE('',#245475,7.937498694708E-02); +#245475 = AXIS2_PLACEMENT_3D('',#245476,#245477,#245478); +#245476 = CARTESIAN_POINT('',(83.606665897294,-48.51752589729,1.585)); +#245477 = DIRECTION('',(0.,0.,-1.)); +#245478 = DIRECTION('',(-0.980786268925,0.195085352318,0.)); +#245479 = ORIENTED_EDGE('',*,*,#245480,.T.); +#245480 = EDGE_CURVE('',#245472,#245481,#245483,.T.); +#245481 = VERTEX_POINT('',#245482); +#245482 = CARTESIAN_POINT('',(84.029999,-49.23697,1.585)); +#245483 = LINE('',#245484,#245485); +#245484 = CARTESIAN_POINT('',(83.678594,-48.483959,1.585)); +#245485 = VECTOR('',#245486,1.); +#245486 = DIRECTION('',(0.422885333571,-0.906183201484,0.)); +#245487 = ORIENTED_EDGE('',*,*,#245488,.T.); +#245488 = EDGE_CURVE('',#245481,#245354,#245489,.T.); +#245489 = LINE('',#245490,#245491); +#245490 = CARTESIAN_POINT('',(84.029999,-49.23697,1.585)); +#245491 = VECTOR('',#245492,1.); +#245492 = DIRECTION('',(0.424518079831,0.905419460745,0.)); +#245493 = PLANE('',#245494); +#245494 = AXIS2_PLACEMENT_3D('',#245495,#245496,#245497); +#245495 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245496 = DIRECTION('',(0.,0.,1.)); +#245497 = DIRECTION('',(1.,0.,-0.)); +#245498 = SHELL_BASED_SURFACE_MODEL('',(#245499)); +#245499 = OPEN_SHELL('',(#245500)); +#245500 = ADVANCED_FACE('',(#245501),#245619,.T.); +#245501 = FACE_BOUND('',#245502,.F.); +#245502 = EDGE_LOOP('',(#245503,#245514,#245522,#245530,#245538,#245547, + #245555,#245564,#245572,#245580,#245588,#245597,#245605,#245613)); +#245503 = ORIENTED_EDGE('',*,*,#245504,.T.); +#245504 = EDGE_CURVE('',#245505,#245507,#245509,.T.); +#245505 = VERTEX_POINT('',#245506); +#245506 = CARTESIAN_POINT('',(85.013997,-48.451528,1.585)); +#245507 = VERTEX_POINT('',#245508); +#245508 = CARTESIAN_POINT('',(85.135945,-48.502041,1.585)); +#245509 = CIRCLE('',#245510,7.937518132319E-02); +#245510 = AXIS2_PLACEMENT_3D('',#245511,#245512,#245513); +#245511 = CARTESIAN_POINT('',(85.058095,-48.51752637729,1.585)); +#245512 = DIRECTION('',(0.,0.,-1.)); +#245513 = DIRECTION('',(-0.555564085208,0.831473720106,0.)); +#245514 = ORIENTED_EDGE('',*,*,#245515,.T.); +#245515 = EDGE_CURVE('',#245507,#245516,#245518,.T.); +#245516 = VERTEX_POINT('',#245517); +#245517 = CARTESIAN_POINT('',(85.13747,-49.042913,1.585)); +#245518 = LINE('',#245519,#245520); +#245519 = CARTESIAN_POINT('',(85.135945,-48.502041,1.585)); +#245520 = VECTOR('',#245521,1.); +#245521 = DIRECTION('',(2.81950986255E-03,-0.999996025174,0.)); +#245522 = ORIENTED_EDGE('',*,*,#245523,.T.); +#245523 = EDGE_CURVE('',#245516,#245524,#245526,.T.); +#245524 = VERTEX_POINT('',#245525); +#245525 = CARTESIAN_POINT('',(85.704435,-49.042913,1.585)); +#245526 = LINE('',#245527,#245528); +#245527 = CARTESIAN_POINT('',(85.13747,-49.042913,1.585)); +#245528 = VECTOR('',#245529,1.); +#245529 = DIRECTION('',(1.,0.,0.)); +#245530 = ORIENTED_EDGE('',*,*,#245531,.T.); +#245531 = EDGE_CURVE('',#245524,#245532,#245534,.T.); +#245532 = VERTEX_POINT('',#245533); +#245533 = CARTESIAN_POINT('',(85.70596,-48.502041,1.585)); +#245534 = LINE('',#245535,#245536); +#245535 = CARTESIAN_POINT('',(85.704435,-49.042913,1.585)); +#245536 = VECTOR('',#245537,1.); +#245537 = DIRECTION('',(2.819509862577E-03,0.999996025174,0.)); +#245538 = ORIENTED_EDGE('',*,*,#245539,.T.); +#245539 = EDGE_CURVE('',#245532,#245540,#245542,.T.); +#245540 = VERTEX_POINT('',#245541); +#245541 = CARTESIAN_POINT('',(85.86166,-48.502041,1.585)); +#245542 = CIRCLE('',#245543,7.937510771646E-02); +#245543 = AXIS2_PLACEMENT_3D('',#245544,#245545,#245546); +#245544 = CARTESIAN_POINT('',(85.78381,-48.517526,1.585)); +#245545 = DIRECTION('',(0.,0.,-1.)); +#245546 = DIRECTION('',(-0.980786070591,0.19508634943,0.)); +#245547 = ORIENTED_EDGE('',*,*,#245548,.T.); +#245548 = EDGE_CURVE('',#245540,#245549,#245551,.T.); +#245549 = VERTEX_POINT('',#245550); +#245550 = CARTESIAN_POINT('',(85.86166,-49.803011,1.585)); +#245551 = LINE('',#245552,#245553); +#245552 = CARTESIAN_POINT('',(85.86166,-48.502041,1.585)); +#245553 = VECTOR('',#245554,1.); +#245554 = DIRECTION('',(0.,-1.,0.)); +#245555 = ORIENTED_EDGE('',*,*,#245556,.T.); +#245556 = EDGE_CURVE('',#245549,#245557,#245559,.T.); +#245557 = VERTEX_POINT('',#245558); +#245558 = CARTESIAN_POINT('',(85.70596,-49.803011,1.585)); +#245559 = CIRCLE('',#245560,7.937510771646E-02); +#245560 = AXIS2_PLACEMENT_3D('',#245561,#245562,#245563); +#245561 = CARTESIAN_POINT('',(85.78381,-49.787526,1.585)); +#245562 = DIRECTION('',(-0.,0.,-1.)); +#245563 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245564 = ORIENTED_EDGE('',*,*,#245565,.T.); +#245565 = EDGE_CURVE('',#245557,#245566,#245568,.T.); +#245566 = VERTEX_POINT('',#245567); +#245567 = CARTESIAN_POINT('',(85.704435,-49.201663,1.585)); +#245568 = LINE('',#245569,#245570); +#245569 = CARTESIAN_POINT('',(85.70596,-49.803011,1.585)); +#245570 = VECTOR('',#245571,1.); +#245571 = DIRECTION('',(-2.535961034676E-03,0.999996784446,0.)); +#245572 = ORIENTED_EDGE('',*,*,#245573,.T.); +#245573 = EDGE_CURVE('',#245566,#245574,#245576,.T.); +#245574 = VERTEX_POINT('',#245575); +#245575 = CARTESIAN_POINT('',(85.13747,-49.201663,1.585)); +#245576 = LINE('',#245577,#245578); +#245577 = CARTESIAN_POINT('',(85.704435,-49.201663,1.585)); +#245578 = VECTOR('',#245579,1.); +#245579 = DIRECTION('',(-1.,0.,0.)); +#245580 = ORIENTED_EDGE('',*,*,#245581,.T.); +#245581 = EDGE_CURVE('',#245574,#245582,#245584,.T.); +#245582 = VERTEX_POINT('',#245583); +#245583 = CARTESIAN_POINT('',(85.135945,-49.803011,1.585)); +#245584 = LINE('',#245585,#245586); +#245585 = CARTESIAN_POINT('',(85.13747,-49.201663,1.585)); +#245586 = VECTOR('',#245587,1.); +#245587 = DIRECTION('',(-2.535961034653E-03,-0.999996784446,0.)); +#245588 = ORIENTED_EDGE('',*,*,#245589,.T.); +#245589 = EDGE_CURVE('',#245582,#245590,#245592,.T.); +#245590 = VERTEX_POINT('',#245591); +#245591 = CARTESIAN_POINT('',(84.980245,-49.803011,1.585)); +#245592 = CIRCLE('',#245593,7.937510771646E-02); +#245593 = AXIS2_PLACEMENT_3D('',#245594,#245595,#245596); +#245594 = CARTESIAN_POINT('',(85.058095,-49.787526,1.585)); +#245595 = DIRECTION('',(-0.,0.,-1.)); +#245596 = DIRECTION('',(0.980786070591,-0.19508634943,-0.)); +#245597 = ORIENTED_EDGE('',*,*,#245598,.T.); +#245598 = EDGE_CURVE('',#245590,#245599,#245601,.T.); +#245599 = VERTEX_POINT('',#245600); +#245600 = CARTESIAN_POINT('',(84.980245,-48.502041,1.585)); +#245601 = LINE('',#245602,#245603); +#245602 = CARTESIAN_POINT('',(84.980245,-49.803011,1.585)); +#245603 = VECTOR('',#245604,1.); +#245604 = DIRECTION('',(0.,1.,0.)); +#245605 = ORIENTED_EDGE('',*,*,#245606,.T.); +#245606 = EDGE_CURVE('',#245599,#245607,#245609,.T.); +#245607 = VERTEX_POINT('',#245608); +#245608 = CARTESIAN_POINT('',(84.992097,-48.473428,1.585)); +#245609 = LINE('',#245610,#245611); +#245610 = CARTESIAN_POINT('',(84.980245,-48.502041,1.585)); +#245611 = VECTOR('',#245612,1.); +#245612 = DIRECTION('',(0.382686390668,0.923878307137,0.)); +#245613 = ORIENTED_EDGE('',*,*,#245614,.T.); +#245614 = EDGE_CURVE('',#245607,#245505,#245615,.T.); +#245615 = LINE('',#245616,#245617); +#245616 = CARTESIAN_POINT('',(84.992097,-48.473428,1.585)); +#245617 = VECTOR('',#245618,1.); +#245618 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#245619 = PLANE('',#245620); +#245620 = AXIS2_PLACEMENT_3D('',#245621,#245622,#245623); +#245621 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245622 = DIRECTION('',(0.,0.,1.)); +#245623 = DIRECTION('',(1.,0.,-0.)); +#245624 = SHELL_BASED_SURFACE_MODEL('',(#245625)); +#245625 = OPEN_SHELL('',(#245626)); +#245626 = ADVANCED_FACE('',(#245627),#245761,.T.); +#245627 = FACE_BOUND('',#245628,.F.); +#245628 = EDGE_LOOP('',(#245629,#245640,#245648,#245656,#245664,#245672, + #245681,#245689,#245698,#245706,#245714,#245722,#245730,#245739, + #245747,#245755)); +#245629 = ORIENTED_EDGE('',*,*,#245630,.T.); +#245630 = EDGE_CURVE('',#245631,#245633,#245635,.T.); +#245631 = VERTEX_POINT('',#245632); +#245632 = CARTESIAN_POINT('',(86.634766,-48.461459,1.585)); +#245633 = VERTEX_POINT('',#245634); +#245634 = CARTESIAN_POINT('',(86.73505,-48.451528,1.585)); +#245635 = CIRCLE('',#245636,8.40177865168E-02); +#245636 = AXIS2_PLACEMENT_3D('',#245637,#245638,#245639); +#245637 = CARTESIAN_POINT('',(86.691533471855,-48.52339802316,1.585)); +#245638 = DIRECTION('',(0.,0.,-1.)); +#245639 = DIRECTION('',(-0.675660169218,0.737213222706,0.)); +#245640 = ORIENTED_EDGE('',*,*,#245641,.T.); +#245641 = EDGE_CURVE('',#245633,#245642,#245644,.T.); +#245642 = VERTEX_POINT('',#245643); +#245643 = CARTESIAN_POINT('',(86.759926,-48.480612,1.585)); +#245644 = LINE('',#245645,#245646); +#245645 = CARTESIAN_POINT('',(86.73505,-48.451528,1.585)); +#245646 = VECTOR('',#245647,1.); +#245647 = DIRECTION('',(0.649990535358,-0.759942303037,0.)); +#245648 = ORIENTED_EDGE('',*,*,#245649,.T.); +#245649 = EDGE_CURVE('',#245642,#245650,#245652,.T.); +#245650 = VERTEX_POINT('',#245651); +#245651 = CARTESIAN_POINT('',(86.770327,-48.517526,1.585)); +#245652 = LINE('',#245653,#245654); +#245653 = CARTESIAN_POINT('',(86.759926,-48.480612,1.585)); +#245654 = VECTOR('',#245655,1.); +#245655 = DIRECTION('',(0.27120313993,-0.962522133196,0.)); +#245656 = ORIENTED_EDGE('',*,*,#245657,.T.); +#245657 = EDGE_CURVE('',#245650,#245658,#245660,.T.); +#245658 = VERTEX_POINT('',#245659); +#245659 = CARTESIAN_POINT('',(86.770327,-49.708151,1.585)); +#245660 = LINE('',#245661,#245662); +#245661 = CARTESIAN_POINT('',(86.770327,-48.517526,1.585)); +#245662 = VECTOR('',#245663,1.); +#245663 = DIRECTION('',(0.,-1.,0.)); +#245664 = ORIENTED_EDGE('',*,*,#245665,.T.); +#245665 = EDGE_CURVE('',#245658,#245666,#245668,.T.); +#245666 = VERTEX_POINT('',#245667); +#245667 = CARTESIAN_POINT('',(87.069295,-49.709676,1.585)); +#245668 = LINE('',#245669,#245670); +#245669 = CARTESIAN_POINT('',(86.770327,-49.708151,1.585)); +#245670 = VECTOR('',#245671,1.); +#245671 = DIRECTION('',(0.999986990764,-5.100814003222E-03,0.)); +#245672 = ORIENTED_EDGE('',*,*,#245673,.T.); +#245673 = EDGE_CURVE('',#245666,#245674,#245676,.T.); +#245674 = VERTEX_POINT('',#245675); +#245675 = CARTESIAN_POINT('',(87.069295,-49.865376,1.585)); +#245676 = CIRCLE('',#245677,7.937510771646E-02); +#245677 = AXIS2_PLACEMENT_3D('',#245678,#245679,#245680); +#245678 = CARTESIAN_POINT('',(87.05381,-49.787526,1.585)); +#245679 = DIRECTION('',(0.,0.,-1.)); +#245680 = DIRECTION('',(0.19508634943,0.980786070591,0.)); +#245681 = ORIENTED_EDGE('',*,*,#245682,.T.); +#245682 = EDGE_CURVE('',#245674,#245683,#245685,.T.); +#245683 = VERTEX_POINT('',#245684); +#245684 = CARTESIAN_POINT('',(86.31261,-49.865376,1.585)); +#245685 = LINE('',#245686,#245687); +#245686 = CARTESIAN_POINT('',(87.069295,-49.865376,1.585)); +#245687 = VECTOR('',#245688,1.); +#245688 = DIRECTION('',(-1.,0.,0.)); +#245689 = ORIENTED_EDGE('',*,*,#245690,.T.); +#245690 = EDGE_CURVE('',#245683,#245691,#245693,.T.); +#245691 = VERTEX_POINT('',#245692); +#245692 = CARTESIAN_POINT('',(86.31261,-49.709676,1.585)); +#245693 = CIRCLE('',#245694,7.937510771646E-02); +#245694 = AXIS2_PLACEMENT_3D('',#245695,#245696,#245697); +#245695 = CARTESIAN_POINT('',(86.328095,-49.787526,1.585)); +#245696 = DIRECTION('',(0.,0.,-1.)); +#245697 = DIRECTION('',(-0.19508634943,-0.980786070591,-0.)); +#245698 = ORIENTED_EDGE('',*,*,#245699,.T.); +#245699 = EDGE_CURVE('',#245691,#245700,#245702,.T.); +#245700 = VERTEX_POINT('',#245701); +#245701 = CARTESIAN_POINT('',(86.611577,-49.708151,1.585)); +#245702 = LINE('',#245703,#245704); +#245703 = CARTESIAN_POINT('',(86.31261,-49.709676,1.585)); +#245704 = VECTOR('',#245705,1.); +#245705 = DIRECTION('',(0.999986990677,5.10083106424E-03,0.)); +#245706 = ORIENTED_EDGE('',*,*,#245707,.T.); +#245707 = EDGE_CURVE('',#245700,#245708,#245710,.T.); +#245708 = VERTEX_POINT('',#245709); +#245709 = CARTESIAN_POINT('',(86.611577,-48.76963,1.585)); +#245710 = LINE('',#245711,#245712); +#245711 = CARTESIAN_POINT('',(86.611577,-49.708151,1.585)); +#245712 = VECTOR('',#245713,1.); +#245713 = DIRECTION('',(0.,1.,0.)); +#245714 = ORIENTED_EDGE('',*,*,#245715,.T.); +#245715 = EDGE_CURVE('',#245708,#245716,#245718,.T.); +#245716 = VERTEX_POINT('',#245717); +#245717 = CARTESIAN_POINT('',(86.491206,-48.886708,1.585)); +#245718 = LINE('',#245719,#245720); +#245719 = CARTESIAN_POINT('',(86.611577,-48.76963,1.585)); +#245720 = VECTOR('',#245721,1.); +#245721 = DIRECTION('',(-0.716844177238,-0.697233408235,0.)); +#245722 = ORIENTED_EDGE('',*,*,#245723,.T.); +#245723 = EDGE_CURVE('',#245716,#245724,#245726,.T.); +#245724 = VERTEX_POINT('',#245725); +#245725 = CARTESIAN_POINT('',(86.34906,-48.956939,1.585)); +#245726 = LINE('',#245727,#245728); +#245727 = CARTESIAN_POINT('',(86.491206,-48.886708,1.585)); +#245728 = VECTOR('',#245729,1.); +#245729 = DIRECTION('',(-0.896541361207,-0.442960029399,0.)); +#245730 = ORIENTED_EDGE('',*,*,#245731,.T.); +#245731 = EDGE_CURVE('',#245724,#245732,#245734,.T.); +#245732 = VERTEX_POINT('',#245733); +#245733 = CARTESIAN_POINT('',(86.279429,-48.817677,1.585)); +#245734 = CIRCLE('',#245735,7.937491299082E-02); +#245735 = AXIS2_PLACEMENT_3D('',#245736,#245737,#245738); +#245736 = CARTESIAN_POINT('',(86.32809460068,-48.88038294966,1.585)); +#245737 = DIRECTION('',(0.,0.,-1.)); +#245738 = DIRECTION('',(0.264131304593,-0.964486730823,0.)); +#245739 = ORIENTED_EDGE('',*,*,#245740,.T.); +#245740 = EDGE_CURVE('',#245732,#245741,#245743,.T.); +#245741 = VERTEX_POINT('',#245742); +#245742 = CARTESIAN_POINT('',(86.402029,-48.754672,1.585)); +#245743 = LINE('',#245744,#245745); +#245744 = CARTESIAN_POINT('',(86.279429,-48.817677,1.585)); +#245745 = VECTOR('',#245746,1.); +#245746 = DIRECTION('',(0.88942475379,0.457081620004,0.)); +#245747 = ORIENTED_EDGE('',*,*,#245748,.T.); +#245748 = EDGE_CURVE('',#245741,#245749,#245751,.T.); +#245749 = VERTEX_POINT('',#245750); +#245750 = CARTESIAN_POINT('',(86.508317,-48.648382,1.585)); +#245751 = LINE('',#245752,#245753); +#245752 = CARTESIAN_POINT('',(86.402029,-48.754672,1.585)); +#245753 = VECTOR('',#245754,1.); +#245754 = DIRECTION('',(0.707100128475,0.707113433836,0.)); +#245755 = ORIENTED_EDGE('',*,*,#245756,.T.); +#245756 = EDGE_CURVE('',#245749,#245631,#245757,.T.); +#245757 = LINE('',#245758,#245759); +#245758 = CARTESIAN_POINT('',(86.508317,-48.648382,1.585)); +#245759 = VECTOR('',#245760,1.); +#245760 = DIRECTION('',(0.56031267593,0.828281175201,0.)); +#245761 = PLANE('',#245762); +#245762 = AXIS2_PLACEMENT_3D('',#245763,#245764,#245765); +#245763 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245764 = DIRECTION('',(0.,0.,1.)); +#245765 = DIRECTION('',(1.,0.,-0.)); +#245766 = SHELL_BASED_SURFACE_MODEL('',(#245767)); +#245767 = OPEN_SHELL('',(#245768)); +#245768 = ADVANCED_FACE('',(#245769),#245918,.T.); +#245769 = FACE_BOUND('',#245770,.F.); +#245770 = EDGE_LOOP('',(#245771,#245782,#245790,#245798,#245806,#245814, + #245822,#245830,#245838,#245846,#245854,#245862,#245870,#245879, + #245887,#245895,#245903,#245912)); +#245771 = ORIENTED_EDGE('',*,*,#245772,.T.); +#245772 = EDGE_CURVE('',#245773,#245775,#245777,.T.); +#245773 = VERTEX_POINT('',#245774); +#245774 = CARTESIAN_POINT('',(179.493823,-48.978456,1.585)); +#245775 = VERTEX_POINT('',#245776); +#245776 = CARTESIAN_POINT('',(180.003218,-48.987786,1.585)); +#245777 = CIRCLE('',#245778,0.450326844012); +#245778 = AXIS2_PLACEMENT_3D('',#245779,#245780,#245781); +#245779 = CARTESIAN_POINT('',(179.7417200301,-49.35440989199,1.585)); +#245780 = DIRECTION('',(0.,0.,-1.)); +#245781 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#245782 = ORIENTED_EDGE('',*,*,#245783,.T.); +#245783 = EDGE_CURVE('',#245775,#245784,#245786,.T.); +#245784 = VERTEX_POINT('',#245785); +#245785 = CARTESIAN_POINT('',(180.066671,-49.053316,1.585)); +#245786 = LINE('',#245787,#245788); +#245787 = CARTESIAN_POINT('',(180.003218,-48.987786,1.585)); +#245788 = VECTOR('',#245789,1.); +#245789 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#245790 = ORIENTED_EDGE('',*,*,#245791,.T.); +#245791 = EDGE_CURVE('',#245784,#245792,#245794,.T.); +#245792 = VERTEX_POINT('',#245793); +#245793 = CARTESIAN_POINT('',(180.124732,-49.173763,1.585)); +#245794 = LINE('',#245795,#245796); +#245795 = CARTESIAN_POINT('',(180.066671,-49.053316,1.585)); +#245796 = VECTOR('',#245797,1.); +#245797 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#245798 = ORIENTED_EDGE('',*,*,#245799,.T.); +#245799 = EDGE_CURVE('',#245792,#245800,#245802,.T.); +#245800 = VERTEX_POINT('',#245801); +#245801 = CARTESIAN_POINT('',(180.123973,-49.300095,1.585)); +#245802 = LINE('',#245803,#245804); +#245803 = CARTESIAN_POINT('',(180.124732,-49.173763,1.585)); +#245804 = VECTOR('',#245805,1.); +#245805 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#245806 = ORIENTED_EDGE('',*,*,#245807,.T.); +#245807 = EDGE_CURVE('',#245800,#245808,#245810,.T.); +#245808 = VERTEX_POINT('',#245809); +#245809 = CARTESIAN_POINT('',(180.065915,-49.468158,1.585)); +#245810 = LINE('',#245811,#245812); +#245811 = CARTESIAN_POINT('',(180.123973,-49.300095,1.585)); +#245812 = VECTOR('',#245813,1.); +#245813 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#245814 = ORIENTED_EDGE('',*,*,#245815,.T.); +#245815 = EDGE_CURVE('',#245808,#245816,#245818,.T.); +#245816 = VERTEX_POINT('',#245817); +#245817 = CARTESIAN_POINT('',(179.744351,-49.791169,1.585)); +#245818 = LINE('',#245819,#245820); +#245819 = CARTESIAN_POINT('',(180.065915,-49.468158,1.585)); +#245820 = VECTOR('',#245821,1.); +#245821 = DIRECTION('',(-0.705517626477,-0.708692372423,0.)); +#245822 = ORIENTED_EDGE('',*,*,#245823,.T.); +#245823 = EDGE_CURVE('',#245816,#245824,#245826,.T.); +#245824 = VERTEX_POINT('',#245825); +#245825 = CARTESIAN_POINT('',(179.72807,-49.751864,1.585)); +#245826 = LINE('',#245827,#245828); +#245827 = CARTESIAN_POINT('',(179.744351,-49.791169,1.585)); +#245828 = VECTOR('',#245829,1.); +#245829 = DIRECTION('',(-0.382690172153,0.923876740771,0.)); +#245830 = ORIENTED_EDGE('',*,*,#245831,.T.); +#245831 = EDGE_CURVE('',#245824,#245832,#245834,.T.); +#245832 = VERTEX_POINT('',#245833); +#245833 = CARTESIAN_POINT('',(179.686686,-49.71048,1.585)); +#245834 = LINE('',#245835,#245836); +#245835 = CARTESIAN_POINT('',(179.72807,-49.751864,1.585)); +#245836 = VECTOR('',#245837,1.); +#245837 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#245838 = ORIENTED_EDGE('',*,*,#245839,.T.); +#245839 = EDGE_CURVE('',#245832,#245840,#245842,.T.); +#245840 = VERTEX_POINT('',#245841); +#245841 = CARTESIAN_POINT('',(179.634934,-49.689043,1.585)); +#245842 = LINE('',#245843,#245844); +#245843 = CARTESIAN_POINT('',(179.686686,-49.71048,1.585)); +#245844 = VECTOR('',#245845,1.); +#245845 = DIRECTION('',(-0.923875621021,0.382692875402,0.)); +#245846 = ORIENTED_EDGE('',*,*,#245847,.T.); +#245847 = EDGE_CURVE('',#245840,#245848,#245850,.T.); +#245848 = VERTEX_POINT('',#245849); +#245849 = CARTESIAN_POINT('',(179.938001,-49.385976,1.585)); +#245850 = LINE('',#245851,#245852); +#245851 = CARTESIAN_POINT('',(179.634934,-49.689043,1.585)); +#245852 = VECTOR('',#245853,1.); +#245853 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#245854 = ORIENTED_EDGE('',*,*,#245855,.T.); +#245855 = EDGE_CURVE('',#245848,#245856,#245858,.T.); +#245856 = VERTEX_POINT('',#245857); +#245857 = CARTESIAN_POINT('',(179.976173,-49.271463,1.585)); +#245858 = LINE('',#245859,#245860); +#245859 = CARTESIAN_POINT('',(179.938001,-49.385976,1.585)); +#245860 = VECTOR('',#245861,1.); +#245861 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#245862 = ORIENTED_EDGE('',*,*,#245863,.T.); +#245863 = EDGE_CURVE('',#245856,#245864,#245866,.T.); +#245864 = VERTEX_POINT('',#245865); +#245865 = CARTESIAN_POINT('',(179.976173,-49.2061,1.585)); +#245866 = LINE('',#245867,#245868); +#245867 = CARTESIAN_POINT('',(179.976173,-49.271463,1.585)); +#245868 = VECTOR('',#245869,1.); +#245869 = DIRECTION('',(0.,1.,0.)); +#245870 = ORIENTED_EDGE('',*,*,#245871,.T.); +#245871 = EDGE_CURVE('',#245864,#245872,#245874,.T.); +#245872 = VERTEX_POINT('',#245873); +#245873 = CARTESIAN_POINT('',(179.842992,-49.072919,1.585)); +#245874 = CIRCLE('',#245875,0.18686440374); +#245875 = AXIS2_PLACEMENT_3D('',#245876,#245877,#245878); +#245876 = CARTESIAN_POINT('',(179.795456,-49.253636,1.585)); +#245877 = DIRECTION('',(0.,0.,1.)); +#245878 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#245879 = ORIENTED_EDGE('',*,*,#245880,.T.); +#245880 = EDGE_CURVE('',#245872,#245881,#245883,.T.); +#245881 = VERTEX_POINT('',#245882); +#245882 = CARTESIAN_POINT('',(179.640307,-49.072919,1.585)); +#245883 = LINE('',#245884,#245885); +#245884 = CARTESIAN_POINT('',(179.842992,-49.072919,1.585)); +#245885 = VECTOR('',#245886,1.); +#245886 = DIRECTION('',(-1.,0.,0.)); +#245887 = ORIENTED_EDGE('',*,*,#245888,.T.); +#245888 = EDGE_CURVE('',#245881,#245889,#245891,.T.); +#245889 = VERTEX_POINT('',#245890); +#245890 = CARTESIAN_POINT('',(179.571791,-49.107177,1.585)); +#245891 = LINE('',#245892,#245893); +#245892 = CARTESIAN_POINT('',(179.640307,-49.072919,1.585)); +#245893 = VECTOR('',#245894,1.); +#245894 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#245895 = ORIENTED_EDGE('',*,*,#245896,.T.); +#245896 = EDGE_CURVE('',#245889,#245897,#245899,.T.); +#245897 = VERTEX_POINT('',#245898); +#245898 = CARTESIAN_POINT('',(179.521413,-49.155517,1.585)); +#245899 = LINE('',#245900,#245901); +#245900 = CARTESIAN_POINT('',(179.571791,-49.107177,1.585)); +#245901 = VECTOR('',#245902,1.); +#245902 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#245903 = ORIENTED_EDGE('',*,*,#245904,.T.); +#245904 = EDGE_CURVE('',#245897,#245905,#245907,.T.); +#245905 = VERTEX_POINT('',#245906); +#245906 = CARTESIAN_POINT('',(179.426712,-49.040124,1.585)); +#245907 = CIRCLE('',#245908,7.499996838526E-02); +#245908 = AXIS2_PLACEMENT_3D('',#245909,#245910,#245911); +#245909 = CARTESIAN_POINT('',(179.479745,-49.09315697246,1.585)); +#245910 = DIRECTION('',(0.,0.,-1.)); +#245911 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#245912 = ORIENTED_EDGE('',*,*,#245913,.T.); +#245913 = EDGE_CURVE('',#245905,#245773,#245914,.T.); +#245914 = LINE('',#245915,#245916); +#245915 = CARTESIAN_POINT('',(179.426712,-49.040124,1.585)); +#245916 = VECTOR('',#245917,1.); +#245917 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#245918 = PLANE('',#245919); +#245919 = AXIS2_PLACEMENT_3D('',#245920,#245921,#245922); +#245920 = CARTESIAN_POINT('',(0.,0.,1.585)); +#245921 = DIRECTION('',(0.,0.,1.)); +#245922 = DIRECTION('',(1.,0.,-0.)); +#245923 = SHELL_BASED_SURFACE_MODEL('',(#245924)); +#245924 = OPEN_SHELL('',(#245925)); +#245925 = ADVANCED_FACE('',(#245926,#246003),#246080,.T.); +#245926 = FACE_BOUND('',#245927,.F.); +#245927 = EDGE_LOOP('',(#245928,#245939,#245947,#245956,#245964,#245972, + #245981,#245989,#245997)); +#245928 = ORIENTED_EDGE('',*,*,#245929,.T.); +#245929 = EDGE_CURVE('',#245930,#245932,#245934,.T.); +#245930 = VERTEX_POINT('',#245931); +#245931 = CARTESIAN_POINT('',(177.115199,-48.536172,1.585)); +#245932 = VERTEX_POINT('',#245933); +#245933 = CARTESIAN_POINT('',(177.678513,-48.541538,1.585)); +#245934 = CIRCLE('',#245935,0.504047013411); +#245935 = AXIS2_PLACEMENT_3D('',#245936,#245937,#245938); +#245936 = CARTESIAN_POINT('',(177.39287439108,-48.95683786374,1.585)); +#245937 = DIRECTION('',(0.,0.,-1.)); +#245938 = DIRECTION('',(-0.550891848762,0.834576641758,0.)); +#245939 = ORIENTED_EDGE('',*,*,#245940,.T.); +#245940 = EDGE_CURVE('',#245932,#245941,#245943,.T.); +#245941 = VERTEX_POINT('',#245942); +#245942 = CARTESIAN_POINT('',(177.741967,-48.607068,1.585)); +#245943 = LINE('',#245944,#245945); +#245944 = CARTESIAN_POINT('',(177.678513,-48.541538,1.585)); +#245945 = VECTOR('',#245946,1.); +#245946 = DIRECTION('',(0.695635787458,-0.718394634729,0.)); +#245947 = ORIENTED_EDGE('',*,*,#245948,.T.); +#245948 = EDGE_CURVE('',#245941,#245949,#245951,.T.); +#245949 = VERTEX_POINT('',#245950); +#245950 = CARTESIAN_POINT('',(177.671067,-49.090979,1.585)); +#245951 = CIRCLE('',#245952,0.3442476568); +#245952 = AXIS2_PLACEMENT_3D('',#245953,#245954,#245955); +#245953 = CARTESIAN_POINT('',(177.46678063106,-48.81389863497,1.585)); +#245954 = DIRECTION('',(0.,0.,-1.)); +#245955 = DIRECTION('',(0.799384871611,0.600819296494,0.)); +#245956 = ORIENTED_EDGE('',*,*,#245957,.T.); +#245957 = EDGE_CURVE('',#245949,#245958,#245960,.T.); +#245958 = VERTEX_POINT('',#245959); +#245959 = CARTESIAN_POINT('',(177.550624,-49.149039,1.585)); +#245960 = LINE('',#245961,#245962); +#245961 = CARTESIAN_POINT('',(177.671067,-49.090979,1.585)); +#245962 = VECTOR('',#245963,1.); +#245963 = DIRECTION('',(-0.900800079444,-0.434234057708,0.)); +#245964 = ORIENTED_EDGE('',*,*,#245965,.T.); +#245965 = EDGE_CURVE('',#245958,#245966,#245968,.T.); +#245966 = VERTEX_POINT('',#245967); +#245967 = CARTESIAN_POINT('',(177.230468,-49.147817,1.585)); +#245968 = LINE('',#245969,#245970); +#245969 = CARTESIAN_POINT('',(177.550624,-49.149039,1.585)); +#245970 = VECTOR('',#245971,1.); +#245971 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#245972 = ORIENTED_EDGE('',*,*,#245973,.T.); +#245973 = EDGE_CURVE('',#245966,#245974,#245976,.T.); +#245974 = VERTEX_POINT('',#245975); +#245975 = CARTESIAN_POINT('',(176.986243,-48.899636,1.585)); +#245976 = CIRCLE('',#245977,0.348628078749); +#245977 = AXIS2_PLACEMENT_3D('',#245978,#245979,#245980); +#245978 = CARTESIAN_POINT('',(177.3236430302,-48.81187064857,1.585)); +#245979 = DIRECTION('',(0.,0.,-1.)); +#245980 = DIRECTION('',(-0.26726197883,-0.963623907275,-0.)); +#245981 = ORIENTED_EDGE('',*,*,#245982,.T.); +#245982 = EDGE_CURVE('',#245974,#245983,#245985,.T.); +#245983 = VERTEX_POINT('',#245984); +#245984 = CARTESIAN_POINT('',(176.987465,-48.722338,1.585)); +#245985 = LINE('',#245986,#245987); +#245986 = CARTESIAN_POINT('',(176.986243,-48.899636,1.585)); +#245987 = VECTOR('',#245988,1.); +#245988 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#245989 = ORIENTED_EDGE('',*,*,#245990,.T.); +#245990 = EDGE_CURVE('',#245983,#245991,#245993,.T.); +#245991 = VERTEX_POINT('',#245992); +#245992 = CARTESIAN_POINT('',(177.049669,-48.599625,1.585)); +#245993 = LINE('',#245994,#245995); +#245994 = CARTESIAN_POINT('',(176.987465,-48.722338,1.585)); +#245995 = VECTOR('',#245996,1.); +#245996 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#245997 = ORIENTED_EDGE('',*,*,#245998,.T.); +#245998 = EDGE_CURVE('',#245991,#245930,#245999,.T.); +#245999 = LINE('',#246000,#246001); +#246000 = CARTESIAN_POINT('',(177.049669,-48.599625,1.585)); +#246001 = VECTOR('',#246002,1.); +#246002 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#246003 = FACE_BOUND('',#246004,.F.); +#246004 = EDGE_LOOP('',(#246005,#246016,#246024,#246033,#246041,#246049, + #246058,#246066,#246074)); +#246005 = ORIENTED_EDGE('',*,*,#246006,.T.); +#246006 = EDGE_CURVE('',#246007,#246009,#246011,.T.); +#246007 = VERTEX_POINT('',#246008); +#246008 = CARTESIAN_POINT('',(177.586803,-48.660929,1.585)); +#246009 = VERTEX_POINT('',#246010); +#246010 = CARTESIAN_POINT('',(177.199467,-48.660929,1.585)); +#246011 = CIRCLE('',#246012,0.358503491901); +#246012 = AXIS2_PLACEMENT_3D('',#246013,#246014,#246015); +#246013 = CARTESIAN_POINT('',(177.393135,-48.96262,1.585)); +#246014 = DIRECTION('',(0.,0.,1.)); +#246015 = DIRECTION('',(0.540212311387,0.841528762804,-0.)); +#246016 = ORIENTED_EDGE('',*,*,#246017,.T.); +#246017 = EDGE_CURVE('',#246009,#246018,#246020,.T.); +#246018 = VERTEX_POINT('',#246019); +#246019 = CARTESIAN_POINT('',(177.16906,-48.691336,1.585)); +#246020 = LINE('',#246021,#246022); +#246021 = CARTESIAN_POINT('',(177.199467,-48.660929,1.585)); +#246022 = VECTOR('',#246023,1.); +#246023 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#246024 = ORIENTED_EDGE('',*,*,#246025,.T.); +#246025 = EDGE_CURVE('',#246018,#246026,#246028,.T.); +#246026 = VERTEX_POINT('',#246027); +#246027 = CARTESIAN_POINT('',(177.199467,-48.966222,1.585)); +#246028 = CIRCLE('',#246029,0.198386215365); +#246029 = AXIS2_PLACEMENT_3D('',#246030,#246031,#246032); +#246030 = CARTESIAN_POINT('',(177.3256521753,-48.81313904216,1.585)); +#246031 = DIRECTION('',(0.,0.,1.)); +#246032 = DIRECTION('',(-0.789329919001,0.61396928178,0.)); +#246033 = ORIENTED_EDGE('',*,*,#246034,.T.); +#246034 = EDGE_CURVE('',#246026,#246035,#246037,.T.); +#246035 = VERTEX_POINT('',#246036); +#246036 = CARTESIAN_POINT('',(177.267983,-49.00048,1.585)); +#246037 = LINE('',#246038,#246039); +#246038 = CARTESIAN_POINT('',(177.199467,-48.966222,1.585)); +#246039 = VECTOR('',#246040,1.); +#246040 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#246041 = ORIENTED_EDGE('',*,*,#246042,.T.); +#246042 = EDGE_CURVE('',#246035,#246043,#246045,.T.); +#246043 = VERTEX_POINT('',#246044); +#246044 = CARTESIAN_POINT('',(177.518287,-49.00048,1.585)); +#246045 = LINE('',#246046,#246047); +#246046 = CARTESIAN_POINT('',(177.267983,-49.00048,1.585)); +#246047 = VECTOR('',#246048,1.); +#246048 = DIRECTION('',(1.,0.,0.)); +#246049 = ORIENTED_EDGE('',*,*,#246050,.T.); +#246050 = EDGE_CURVE('',#246043,#246051,#246053,.T.); +#246051 = VERTEX_POINT('',#246052); +#246052 = CARTESIAN_POINT('',(177.651469,-48.867299,1.585)); +#246053 = CIRCLE('',#246054,0.186872595955); +#246054 = AXIS2_PLACEMENT_3D('',#246055,#246056,#246057); +#246055 = CARTESIAN_POINT('',(177.47074536766,-48.81975601068,1.585)); +#246056 = DIRECTION('',(0.,0.,1.)); +#246057 = DIRECTION('',(0.254406656561,-0.967097333828,0.)); +#246058 = ORIENTED_EDGE('',*,*,#246059,.T.); +#246059 = EDGE_CURVE('',#246051,#246060,#246062,.T.); +#246060 = VERTEX_POINT('',#246061); +#246061 = CARTESIAN_POINT('',(177.651469,-48.759852,1.585)); +#246062 = LINE('',#246063,#246064); +#246063 = CARTESIAN_POINT('',(177.651469,-48.867299,1.585)); +#246064 = VECTOR('',#246065,1.); +#246065 = DIRECTION('',(0.,1.,0.)); +#246066 = ORIENTED_EDGE('',*,*,#246067,.T.); +#246067 = EDGE_CURVE('',#246060,#246068,#246070,.T.); +#246068 = VERTEX_POINT('',#246069); +#246069 = CARTESIAN_POINT('',(177.617211,-48.691336,1.585)); +#246070 = LINE('',#246071,#246072); +#246071 = CARTESIAN_POINT('',(177.651469,-48.759852,1.585)); +#246072 = VECTOR('',#246073,1.); +#246073 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#246074 = ORIENTED_EDGE('',*,*,#246075,.T.); +#246075 = EDGE_CURVE('',#246068,#246007,#246076,.T.); +#246076 = LINE('',#246077,#246078); +#246077 = CARTESIAN_POINT('',(177.617211,-48.691336,1.585)); +#246078 = VECTOR('',#246079,1.); +#246079 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#246080 = PLANE('',#246081); +#246081 = AXIS2_PLACEMENT_3D('',#246082,#246083,#246084); +#246082 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246083 = DIRECTION('',(0.,0.,1.)); +#246084 = DIRECTION('',(1.,0.,-0.)); +#246085 = SHELL_BASED_SURFACE_MODEL('',(#246086)); +#246086 = OPEN_SHELL('',(#246087)); +#246087 = ADVANCED_FACE('',(#246088),#246132,.T.); +#246088 = FACE_BOUND('',#246089,.F.); +#246089 = EDGE_LOOP('',(#246090,#246101,#246109,#246118,#246126)); +#246090 = ORIENTED_EDGE('',*,*,#246091,.T.); +#246091 = EDGE_CURVE('',#246092,#246094,#246096,.T.); +#246092 = VERTEX_POINT('',#246093); +#246093 = CARTESIAN_POINT('',(175.263717,-48.362881,1.585)); +#246094 = VERTEX_POINT('',#246095); +#246095 = CARTESIAN_POINT('',(175.37915,-48.385842,1.585)); +#246096 = CIRCLE('',#246097,6.000007318648E-02); +#246097 = AXIS2_PLACEMENT_3D('',#246098,#246099,#246100); +#246098 = CARTESIAN_POINT('',(175.31914992681,-48.38584182331,1.585)); +#246099 = DIRECTION('',(0.,0.,-1.)); +#246100 = DIRECTION('',(-0.923880986636,0.382679921778,0.)); +#246101 = ORIENTED_EDGE('',*,*,#246102,.T.); +#246102 = EDGE_CURVE('',#246094,#246103,#246105,.T.); +#246103 = VERTEX_POINT('',#246104); +#246104 = CARTESIAN_POINT('',(175.37915,-48.860358,1.585)); +#246105 = LINE('',#246106,#246107); +#246106 = CARTESIAN_POINT('',(175.37915,-48.385842,1.585)); +#246107 = VECTOR('',#246108,1.); +#246108 = DIRECTION('',(0.,-1.,0.)); +#246109 = ORIENTED_EDGE('',*,*,#246110,.T.); +#246110 = EDGE_CURVE('',#246103,#246111,#246113,.T.); +#246111 = VERTEX_POINT('',#246112); +#246112 = CARTESIAN_POINT('',(175.25915,-48.860358,1.585)); +#246113 = CIRCLE('',#246114,6.000000000042E-02); +#246114 = AXIS2_PLACEMENT_3D('',#246115,#246116,#246117); +#246115 = CARTESIAN_POINT('',(175.31915,-48.86035822558,1.585)); +#246116 = DIRECTION('',(0.,0.,-1.)); +#246117 = DIRECTION('',(0.999999999993,3.759794016838E-06,0.)); +#246118 = ORIENTED_EDGE('',*,*,#246119,.T.); +#246119 = EDGE_CURVE('',#246111,#246120,#246122,.T.); +#246120 = VERTEX_POINT('',#246121); +#246121 = CARTESIAN_POINT('',(175.25915,-48.385842,1.585)); +#246122 = LINE('',#246123,#246124); +#246123 = CARTESIAN_POINT('',(175.25915,-48.860358,1.585)); +#246124 = VECTOR('',#246125,1.); +#246125 = DIRECTION('',(0.,1.,0.)); +#246126 = ORIENTED_EDGE('',*,*,#246127,.T.); +#246127 = EDGE_CURVE('',#246120,#246092,#246128,.T.); +#246128 = LINE('',#246129,#246130); +#246129 = CARTESIAN_POINT('',(175.25915,-48.385842,1.585)); +#246130 = VECTOR('',#246131,1.); +#246131 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#246132 = PLANE('',#246133); +#246133 = AXIS2_PLACEMENT_3D('',#246134,#246135,#246136); +#246134 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246135 = DIRECTION('',(0.,0.,1.)); +#246136 = DIRECTION('',(1.,0.,-0.)); +#246137 = SHELL_BASED_SURFACE_MODEL('',(#246138)); +#246138 = OPEN_SHELL('',(#246139)); +#246139 = ADVANCED_FACE('',(#246140),#246184,.T.); +#246140 = FACE_BOUND('',#246141,.F.); +#246141 = EDGE_LOOP('',(#246142,#246153,#246161,#246170,#246178)); +#246142 = ORIENTED_EDGE('',*,*,#246143,.T.); +#246143 = EDGE_CURVE('',#246144,#246146,#246148,.T.); +#246144 = VERTEX_POINT('',#246145); +#246145 = CARTESIAN_POINT('',(176.308717,-48.362881,1.585)); +#246146 = VERTEX_POINT('',#246147); +#246147 = CARTESIAN_POINT('',(176.42415,-48.385842,1.585)); +#246148 = CIRCLE('',#246149,6.000007318647E-02); +#246149 = AXIS2_PLACEMENT_3D('',#246150,#246151,#246152); +#246150 = CARTESIAN_POINT('',(176.36414992681,-48.38584182331,1.585)); +#246151 = DIRECTION('',(0.,0.,-1.)); +#246152 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#246153 = ORIENTED_EDGE('',*,*,#246154,.T.); +#246154 = EDGE_CURVE('',#246146,#246155,#246157,.T.); +#246155 = VERTEX_POINT('',#246156); +#246156 = CARTESIAN_POINT('',(176.42415,-48.860358,1.585)); +#246157 = LINE('',#246158,#246159); +#246158 = CARTESIAN_POINT('',(176.42415,-48.385842,1.585)); +#246159 = VECTOR('',#246160,1.); +#246160 = DIRECTION('',(0.,-1.,0.)); +#246161 = ORIENTED_EDGE('',*,*,#246162,.T.); +#246162 = EDGE_CURVE('',#246155,#246163,#246165,.T.); +#246163 = VERTEX_POINT('',#246164); +#246164 = CARTESIAN_POINT('',(176.30415,-48.860358,1.585)); +#246165 = CIRCLE('',#246166,6.000000000042E-02); +#246166 = AXIS2_PLACEMENT_3D('',#246167,#246168,#246169); +#246167 = CARTESIAN_POINT('',(176.36415,-48.86035822558,1.585)); +#246168 = DIRECTION('',(0.,0.,-1.)); +#246169 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#246170 = ORIENTED_EDGE('',*,*,#246171,.T.); +#246171 = EDGE_CURVE('',#246163,#246172,#246174,.T.); +#246172 = VERTEX_POINT('',#246173); +#246173 = CARTESIAN_POINT('',(176.30415,-48.385842,1.585)); +#246174 = LINE('',#246175,#246176); +#246175 = CARTESIAN_POINT('',(176.30415,-48.860358,1.585)); +#246176 = VECTOR('',#246177,1.); +#246177 = DIRECTION('',(0.,1.,0.)); +#246178 = ORIENTED_EDGE('',*,*,#246179,.T.); +#246179 = EDGE_CURVE('',#246172,#246144,#246180,.T.); +#246180 = LINE('',#246181,#246182); +#246181 = CARTESIAN_POINT('',(176.30415,-48.385842,1.585)); +#246182 = VECTOR('',#246183,1.); +#246183 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#246184 = PLANE('',#246185); +#246185 = AXIS2_PLACEMENT_3D('',#246186,#246187,#246188); +#246186 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246187 = DIRECTION('',(0.,0.,1.)); +#246188 = DIRECTION('',(1.,0.,-0.)); +#246189 = SHELL_BASED_SURFACE_MODEL('',(#246190)); +#246190 = OPEN_SHELL('',(#246191)); +#246191 = ADVANCED_FACE('',(#246192),#246228,.T.); +#246192 = FACE_BOUND('',#246193,.F.); +#246193 = EDGE_LOOP('',(#246194,#246205,#246213,#246222)); +#246194 = ORIENTED_EDGE('',*,*,#246195,.T.); +#246195 = EDGE_CURVE('',#246196,#246198,#246200,.T.); +#246196 = VERTEX_POINT('',#246197); +#246197 = CARTESIAN_POINT('',(194.016892,-48.9056,1.585)); +#246198 = VERTEX_POINT('',#246199); +#246199 = CARTESIAN_POINT('',(194.016892,-48.7856,1.585)); +#246200 = CIRCLE('',#246201,6.000000000042E-02); +#246201 = AXIS2_PLACEMENT_3D('',#246202,#246203,#246204); +#246202 = CARTESIAN_POINT('',(194.01689177441,-48.8456,1.585)); +#246203 = DIRECTION('',(0.,0.,-1.)); +#246204 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246205 = ORIENTED_EDGE('',*,*,#246206,.T.); +#246206 = EDGE_CURVE('',#246198,#246207,#246209,.T.); +#246207 = VERTEX_POINT('',#246208); +#246208 = CARTESIAN_POINT('',(194.491408,-48.7856,1.585)); +#246209 = LINE('',#246210,#246211); +#246210 = CARTESIAN_POINT('',(194.016892,-48.7856,1.585)); +#246211 = VECTOR('',#246212,1.); +#246212 = DIRECTION('',(1.,0.,0.)); +#246213 = ORIENTED_EDGE('',*,*,#246214,.T.); +#246214 = EDGE_CURVE('',#246207,#246215,#246217,.T.); +#246215 = VERTEX_POINT('',#246216); +#246216 = CARTESIAN_POINT('',(194.491408,-48.9056,1.585)); +#246217 = CIRCLE('',#246218,6.000000000043E-02); +#246218 = AXIS2_PLACEMENT_3D('',#246219,#246220,#246221); +#246219 = CARTESIAN_POINT('',(194.49140822558,-48.8456,1.585)); +#246220 = DIRECTION('',(0.,0.,-1.)); +#246221 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246222 = ORIENTED_EDGE('',*,*,#246223,.T.); +#246223 = EDGE_CURVE('',#246215,#246196,#246224,.T.); +#246224 = LINE('',#246225,#246226); +#246225 = CARTESIAN_POINT('',(194.491408,-48.9056,1.585)); +#246226 = VECTOR('',#246227,1.); +#246227 = DIRECTION('',(-1.,0.,0.)); +#246228 = PLANE('',#246229); +#246229 = AXIS2_PLACEMENT_3D('',#246230,#246231,#246232); +#246230 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246231 = DIRECTION('',(0.,0.,1.)); +#246232 = DIRECTION('',(1.,0.,-0.)); +#246233 = SHELL_BASED_SURFACE_MODEL('',(#246234)); +#246234 = OPEN_SHELL('',(#246235)); +#246235 = ADVANCED_FACE('',(#246236),#246272,.T.); +#246236 = FACE_BOUND('',#246237,.F.); +#246237 = EDGE_LOOP('',(#246238,#246249,#246257,#246266)); +#246238 = ORIENTED_EDGE('',*,*,#246239,.T.); +#246239 = EDGE_CURVE('',#246240,#246242,#246244,.T.); +#246240 = VERTEX_POINT('',#246241); +#246241 = CARTESIAN_POINT('',(198.016892,-48.9056,1.585)); +#246242 = VERTEX_POINT('',#246243); +#246243 = CARTESIAN_POINT('',(198.016892,-48.7856,1.585)); +#246244 = CIRCLE('',#246245,6.000000000042E-02); +#246245 = AXIS2_PLACEMENT_3D('',#246246,#246247,#246248); +#246246 = CARTESIAN_POINT('',(198.01689177441,-48.8456,1.585)); +#246247 = DIRECTION('',(0.,0.,-1.)); +#246248 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246249 = ORIENTED_EDGE('',*,*,#246250,.T.); +#246250 = EDGE_CURVE('',#246242,#246251,#246253,.T.); +#246251 = VERTEX_POINT('',#246252); +#246252 = CARTESIAN_POINT('',(198.491408,-48.7856,1.585)); +#246253 = LINE('',#246254,#246255); +#246254 = CARTESIAN_POINT('',(198.016892,-48.7856,1.585)); +#246255 = VECTOR('',#246256,1.); +#246256 = DIRECTION('',(1.,0.,0.)); +#246257 = ORIENTED_EDGE('',*,*,#246258,.T.); +#246258 = EDGE_CURVE('',#246251,#246259,#246261,.T.); +#246259 = VERTEX_POINT('',#246260); +#246260 = CARTESIAN_POINT('',(198.491408,-48.9056,1.585)); +#246261 = CIRCLE('',#246262,6.000000000043E-02); +#246262 = AXIS2_PLACEMENT_3D('',#246263,#246264,#246265); +#246263 = CARTESIAN_POINT('',(198.49140822558,-48.8456,1.585)); +#246264 = DIRECTION('',(0.,0.,-1.)); +#246265 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246266 = ORIENTED_EDGE('',*,*,#246267,.T.); +#246267 = EDGE_CURVE('',#246259,#246240,#246268,.T.); +#246268 = LINE('',#246269,#246270); +#246269 = CARTESIAN_POINT('',(198.491408,-48.9056,1.585)); +#246270 = VECTOR('',#246271,1.); +#246271 = DIRECTION('',(-1.,0.,0.)); +#246272 = PLANE('',#246273); +#246273 = AXIS2_PLACEMENT_3D('',#246274,#246275,#246276); +#246274 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246275 = DIRECTION('',(0.,0.,1.)); +#246276 = DIRECTION('',(1.,0.,-0.)); +#246277 = SHELL_BASED_SURFACE_MODEL('',(#246278)); +#246278 = OPEN_SHELL('',(#246279)); +#246279 = ADVANCED_FACE('',(#246280),#246316,.T.); +#246280 = FACE_BOUND('',#246281,.F.); +#246281 = EDGE_LOOP('',(#246282,#246293,#246301,#246310)); +#246282 = ORIENTED_EDGE('',*,*,#246283,.T.); +#246283 = EDGE_CURVE('',#246284,#246286,#246288,.T.); +#246284 = VERTEX_POINT('',#246285); +#246285 = CARTESIAN_POINT('',(202.016892,-48.9056,1.585)); +#246286 = VERTEX_POINT('',#246287); +#246287 = CARTESIAN_POINT('',(202.016892,-48.7856,1.585)); +#246288 = CIRCLE('',#246289,6.000000000042E-02); +#246289 = AXIS2_PLACEMENT_3D('',#246290,#246291,#246292); +#246290 = CARTESIAN_POINT('',(202.01689177441,-48.8456,1.585)); +#246291 = DIRECTION('',(0.,0.,-1.)); +#246292 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246293 = ORIENTED_EDGE('',*,*,#246294,.T.); +#246294 = EDGE_CURVE('',#246286,#246295,#246297,.T.); +#246295 = VERTEX_POINT('',#246296); +#246296 = CARTESIAN_POINT('',(202.491408,-48.7856,1.585)); +#246297 = LINE('',#246298,#246299); +#246298 = CARTESIAN_POINT('',(202.016892,-48.7856,1.585)); +#246299 = VECTOR('',#246300,1.); +#246300 = DIRECTION('',(1.,0.,0.)); +#246301 = ORIENTED_EDGE('',*,*,#246302,.T.); +#246302 = EDGE_CURVE('',#246295,#246303,#246305,.T.); +#246303 = VERTEX_POINT('',#246304); +#246304 = CARTESIAN_POINT('',(202.491408,-48.9056,1.585)); +#246305 = CIRCLE('',#246306,6.000000000043E-02); +#246306 = AXIS2_PLACEMENT_3D('',#246307,#246308,#246309); +#246307 = CARTESIAN_POINT('',(202.49140822558,-48.8456,1.585)); +#246308 = DIRECTION('',(0.,0.,-1.)); +#246309 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246310 = ORIENTED_EDGE('',*,*,#246311,.T.); +#246311 = EDGE_CURVE('',#246303,#246284,#246312,.T.); +#246312 = LINE('',#246313,#246314); +#246313 = CARTESIAN_POINT('',(202.491408,-48.9056,1.585)); +#246314 = VECTOR('',#246315,1.); +#246315 = DIRECTION('',(-1.,0.,0.)); +#246316 = PLANE('',#246317); +#246317 = AXIS2_PLACEMENT_3D('',#246318,#246319,#246320); +#246318 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246319 = DIRECTION('',(0.,0.,1.)); +#246320 = DIRECTION('',(1.,0.,-0.)); +#246321 = SHELL_BASED_SURFACE_MODEL('',(#246322)); +#246322 = OPEN_SHELL('',(#246323)); +#246323 = ADVANCED_FACE('',(#246324),#246360,.T.); +#246324 = FACE_BOUND('',#246325,.F.); +#246325 = EDGE_LOOP('',(#246326,#246337,#246345,#246354)); +#246326 = ORIENTED_EDGE('',*,*,#246327,.T.); +#246327 = EDGE_CURVE('',#246328,#246330,#246332,.T.); +#246328 = VERTEX_POINT('',#246329); +#246329 = CARTESIAN_POINT('',(206.016892,-48.9056,1.585)); +#246330 = VERTEX_POINT('',#246331); +#246331 = CARTESIAN_POINT('',(206.016892,-48.7856,1.585)); +#246332 = CIRCLE('',#246333,6.000000000042E-02); +#246333 = AXIS2_PLACEMENT_3D('',#246334,#246335,#246336); +#246334 = CARTESIAN_POINT('',(206.01689177441,-48.8456,1.585)); +#246335 = DIRECTION('',(0.,0.,-1.)); +#246336 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246337 = ORIENTED_EDGE('',*,*,#246338,.T.); +#246338 = EDGE_CURVE('',#246330,#246339,#246341,.T.); +#246339 = VERTEX_POINT('',#246340); +#246340 = CARTESIAN_POINT('',(206.491408,-48.7856,1.585)); +#246341 = LINE('',#246342,#246343); +#246342 = CARTESIAN_POINT('',(206.016892,-48.7856,1.585)); +#246343 = VECTOR('',#246344,1.); +#246344 = DIRECTION('',(1.,0.,0.)); +#246345 = ORIENTED_EDGE('',*,*,#246346,.T.); +#246346 = EDGE_CURVE('',#246339,#246347,#246349,.T.); +#246347 = VERTEX_POINT('',#246348); +#246348 = CARTESIAN_POINT('',(206.491408,-48.9056,1.585)); +#246349 = CIRCLE('',#246350,6.000000000043E-02); +#246350 = AXIS2_PLACEMENT_3D('',#246351,#246352,#246353); +#246351 = CARTESIAN_POINT('',(206.49140822558,-48.8456,1.585)); +#246352 = DIRECTION('',(0.,0.,-1.)); +#246353 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246354 = ORIENTED_EDGE('',*,*,#246355,.T.); +#246355 = EDGE_CURVE('',#246347,#246328,#246356,.T.); +#246356 = LINE('',#246357,#246358); +#246357 = CARTESIAN_POINT('',(206.491408,-48.9056,1.585)); +#246358 = VECTOR('',#246359,1.); +#246359 = DIRECTION('',(-1.,0.,0.)); +#246360 = PLANE('',#246361); +#246361 = AXIS2_PLACEMENT_3D('',#246362,#246363,#246364); +#246362 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246363 = DIRECTION('',(0.,0.,1.)); +#246364 = DIRECTION('',(1.,0.,-0.)); +#246365 = SHELL_BASED_SURFACE_MODEL('',(#246366)); +#246366 = OPEN_SHELL('',(#246367)); +#246367 = ADVANCED_FACE('',(#246368),#246569,.T.); +#246368 = FACE_BOUND('',#246369,.F.); +#246369 = EDGE_LOOP('',(#246370,#246381,#246389,#246398,#246406,#246414, + #246423,#246431,#246439,#246448,#246456,#246464,#246472,#246480, + #246488,#246496,#246504,#246513,#246521,#246530,#246538,#246546, + #246554,#246563)); +#246370 = ORIENTED_EDGE('',*,*,#246371,.T.); +#246371 = EDGE_CURVE('',#246372,#246374,#246376,.T.); +#246372 = VERTEX_POINT('',#246373); +#246373 = CARTESIAN_POINT('',(177.07388,-47.246493,1.585)); +#246374 = VERTEX_POINT('',#246375); +#246375 = CARTESIAN_POINT('',(177.768137,-47.203596,1.585)); +#246376 = CIRCLE('',#246377,0.762529751519); +#246377 = AXIS2_PLACEMENT_3D('',#246378,#246379,#246380); +#246378 = CARTESIAN_POINT('',(177.46285806099,-47.90234945534,1.585)); +#246379 = DIRECTION('',(0.,0.,-1.)); +#246380 = DIRECTION('',(-0.51011525809,0.860106053614,0.)); +#246381 = ORIENTED_EDGE('',*,*,#246382,.T.); +#246382 = EDGE_CURVE('',#246374,#246383,#246385,.T.); +#246383 = VERTEX_POINT('',#246384); +#246384 = CARTESIAN_POINT('',(177.788829,-47.224288,1.585)); +#246385 = LINE('',#246386,#246387); +#246386 = CARTESIAN_POINT('',(177.768137,-47.203596,1.585)); +#246387 = VECTOR('',#246388,1.); +#246388 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#246389 = ORIENTED_EDGE('',*,*,#246390,.T.); +#246390 = EDGE_CURVE('',#246383,#246391,#246393,.T.); +#246391 = VERTEX_POINT('',#246392); +#246392 = CARTESIAN_POINT('',(177.726469,-47.340956,1.585)); +#246393 = CIRCLE('',#246394,7.49997958033E-02); +#246394 = AXIS2_PLACEMENT_3D('',#246395,#246396,#246397); +#246395 = CARTESIAN_POINT('',(177.72646931647,-47.26595620419,1.585)); +#246396 = DIRECTION('',(0.,0.,-1.)); +#246397 = DIRECTION('',(0.831464710782,0.555577568593,0.)); +#246398 = ORIENTED_EDGE('',*,*,#246399,.T.); +#246399 = EDGE_CURVE('',#246391,#246400,#246402,.T.); +#246400 = VERTEX_POINT('',#246401); +#246401 = CARTESIAN_POINT('',(177.220364,-47.340956,1.585)); +#246402 = LINE('',#246403,#246404); +#246403 = CARTESIAN_POINT('',(177.726469,-47.340956,1.585)); +#246404 = VECTOR('',#246405,1.); +#246405 = DIRECTION('',(-1.,0.,0.)); +#246406 = ORIENTED_EDGE('',*,*,#246407,.T.); +#246407 = EDGE_CURVE('',#246400,#246408,#246410,.T.); +#246408 = VERTEX_POINT('',#246409); +#246409 = CARTESIAN_POINT('',(177.163322,-47.369476,1.585)); +#246410 = LINE('',#246411,#246412); +#246411 = CARTESIAN_POINT('',(177.220364,-47.340956,1.585)); +#246412 = VECTOR('',#246413,1.); +#246413 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#246414 = ORIENTED_EDGE('',*,*,#246415,.T.); +#246415 = EDGE_CURVE('',#246408,#246416,#246418,.T.); +#246416 = VERTEX_POINT('',#246417); +#246417 = CARTESIAN_POINT('',(177.163322,-47.591007,1.585)); +#246418 = CIRCLE('',#246419,0.186653372204); +#246419 = AXIS2_PLACEMENT_3D('',#246420,#246421,#246422); +#246420 = CARTESIAN_POINT('',(177.31355676749,-47.4802415,1.585)); +#246421 = DIRECTION('',(0.,0.,1.)); +#246422 = DIRECTION('',(-0.804886435872,0.593428871347,0.)); +#246423 = ORIENTED_EDGE('',*,*,#246424,.T.); +#246424 = EDGE_CURVE('',#246416,#246425,#246427,.T.); +#246425 = VERTEX_POINT('',#246426); +#246426 = CARTESIAN_POINT('',(177.220364,-47.619528,1.585)); +#246427 = LINE('',#246428,#246429); +#246428 = CARTESIAN_POINT('',(177.163322,-47.591007,1.585)); +#246429 = VECTOR('',#246430,1.); +#246430 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#246431 = ORIENTED_EDGE('',*,*,#246432,.T.); +#246432 = EDGE_CURVE('',#246425,#246433,#246435,.T.); +#246433 = VERTEX_POINT('',#246434); +#246434 = CARTESIAN_POINT('',(177.741101,-47.620969,1.585)); +#246435 = LINE('',#246436,#246437); +#246436 = CARTESIAN_POINT('',(177.220364,-47.619528,1.585)); +#246437 = VECTOR('',#246438,1.); +#246438 = DIRECTION('',(0.999996171236,-2.767221232121E-03,0.)); +#246439 = ORIENTED_EDGE('',*,*,#246440,.T.); +#246440 = EDGE_CURVE('',#246433,#246441,#246443,.T.); +#246441 = VERTEX_POINT('',#246442); +#246442 = CARTESIAN_POINT('',(177.726469,-47.769528,1.585)); +#246443 = CIRCLE('',#246444,7.500006711464E-02); +#246444 = AXIS2_PLACEMENT_3D('',#246445,#246446,#246447); +#246445 = CARTESIAN_POINT('',(177.72646906711,-47.69452793288,1.585)); +#246446 = DIRECTION('',(0.,0.,-1.)); +#246447 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#246448 = ORIENTED_EDGE('',*,*,#246449,.T.); +#246449 = EDGE_CURVE('',#246441,#246450,#246452,.T.); +#246450 = VERTEX_POINT('',#246451); +#246451 = CARTESIAN_POINT('',(177.220364,-47.769528,1.585)); +#246452 = LINE('',#246453,#246454); +#246453 = CARTESIAN_POINT('',(177.726469,-47.769528,1.585)); +#246454 = VECTOR('',#246455,1.); +#246455 = DIRECTION('',(-1.,0.,0.)); +#246456 = ORIENTED_EDGE('',*,*,#246457,.T.); +#246457 = EDGE_CURVE('',#246450,#246458,#246460,.T.); +#246458 = VERTEX_POINT('',#246459); +#246459 = CARTESIAN_POINT('',(177.163322,-47.798048,1.585)); +#246460 = LINE('',#246461,#246462); +#246461 = CARTESIAN_POINT('',(177.220364,-47.769528,1.585)); +#246462 = VECTOR('',#246463,1.); +#246463 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#246464 = ORIENTED_EDGE('',*,*,#246465,.T.); +#246465 = EDGE_CURVE('',#246458,#246466,#246468,.T.); +#246466 = VERTEX_POINT('',#246467); +#246467 = CARTESIAN_POINT('',(177.134802,-47.85509,1.585)); +#246468 = LINE('',#246469,#246470); +#246469 = CARTESIAN_POINT('',(177.163322,-47.798048,1.585)); +#246470 = VECTOR('',#246471,1.); +#246471 = DIRECTION('',(-0.447201051247,-0.894433463017,0.)); +#246472 = ORIENTED_EDGE('',*,*,#246473,.T.); +#246473 = EDGE_CURVE('',#246466,#246474,#246476,.T.); +#246474 = VERTEX_POINT('',#246475); +#246475 = CARTESIAN_POINT('',(177.134802,-47.962537,1.585)); +#246476 = LINE('',#246477,#246478); +#246477 = CARTESIAN_POINT('',(177.134802,-47.85509,1.585)); +#246478 = VECTOR('',#246479,1.); +#246479 = DIRECTION('',(0.,-1.,0.)); +#246480 = ORIENTED_EDGE('',*,*,#246481,.T.); +#246481 = EDGE_CURVE('',#246474,#246482,#246484,.T.); +#246482 = VERTEX_POINT('',#246483); +#246483 = CARTESIAN_POINT('',(177.16906,-48.031053,1.585)); +#246484 = LINE('',#246485,#246486); +#246485 = CARTESIAN_POINT('',(177.134802,-47.962537,1.585)); +#246486 = VECTOR('',#246487,1.); +#246487 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#246488 = ORIENTED_EDGE('',*,*,#246489,.T.); +#246489 = EDGE_CURVE('',#246482,#246490,#246492,.T.); +#246490 = VERTEX_POINT('',#246491); +#246491 = CARTESIAN_POINT('',(177.186106,-48.048099,1.585)); +#246492 = LINE('',#246493,#246494); +#246493 = CARTESIAN_POINT('',(177.16906,-48.031053,1.585)); +#246494 = VECTOR('',#246495,1.); +#246495 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#246496 = ORIENTED_EDGE('',*,*,#246497,.T.); +#246497 = EDGE_CURVE('',#246490,#246498,#246500,.T.); +#246498 = VERTEX_POINT('',#246499); +#246499 = CARTESIAN_POINT('',(177.741101,-48.04954,1.585)); +#246500 = LINE('',#246501,#246502); +#246501 = CARTESIAN_POINT('',(177.186106,-48.048099,1.585)); +#246502 = VECTOR('',#246503,1.); +#246503 = DIRECTION('',(0.999996629319,-2.596411035863E-03,0.)); +#246504 = ORIENTED_EDGE('',*,*,#246505,.T.); +#246505 = EDGE_CURVE('',#246498,#246506,#246508,.T.); +#246506 = VERTEX_POINT('',#246507); +#246507 = CARTESIAN_POINT('',(177.726469,-48.198099,1.585)); +#246508 = CIRCLE('',#246509,7.500006711464E-02); +#246509 = AXIS2_PLACEMENT_3D('',#246510,#246511,#246512); +#246510 = CARTESIAN_POINT('',(177.72646906711,-48.12309893288,1.585)); +#246511 = DIRECTION('',(0.,0.,-1.)); +#246512 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#246513 = ORIENTED_EDGE('',*,*,#246514,.T.); +#246514 = EDGE_CURVE('',#246506,#246515,#246517,.T.); +#246515 = VERTEX_POINT('',#246516); +#246516 = CARTESIAN_POINT('',(177.04517,-48.196658,1.585)); +#246517 = LINE('',#246518,#246519); +#246518 = CARTESIAN_POINT('',(177.726469,-48.198099,1.585)); +#246519 = VECTOR('',#246520,1.); +#246520 = DIRECTION('',(-0.999997763232,2.115072496535E-03,0.)); +#246521 = ORIENTED_EDGE('',*,*,#246522,.T.); +#246522 = EDGE_CURVE('',#246515,#246523,#246525,.T.); +#246523 = VERTEX_POINT('',#246524); +#246524 = CARTESIAN_POINT('',(177.016843,-48.062029,1.585)); +#246525 = CIRCLE('',#246526,7.472382541849E-02); +#246526 = AXIS2_PLACEMENT_3D('',#246527,#246528,#246529); +#246527 = CARTESIAN_POINT('',(177.05956681475,-48.12333418524,1.585)); +#246528 = DIRECTION('',(0.,0.,-1.)); +#246529 = DIRECTION('',(-0.192666993071,-0.981264199786,-0.)); +#246530 = ORIENTED_EDGE('',*,*,#246531,.T.); +#246531 = EDGE_CURVE('',#246523,#246532,#246534,.T.); +#246532 = VERTEX_POINT('',#246533); +#246533 = CARTESIAN_POINT('',(176.986243,-47.994874,1.585)); +#246534 = LINE('',#246535,#246536); +#246535 = CARTESIAN_POINT('',(177.016843,-48.062029,1.585)); +#246536 = VECTOR('',#246537,1.); +#246537 = DIRECTION('',(-0.414645032321,0.90998324005,0.)); +#246538 = ORIENTED_EDGE('',*,*,#246539,.T.); +#246539 = EDGE_CURVE('',#246532,#246540,#246542,.T.); +#246540 = VERTEX_POINT('',#246541); +#246541 = CARTESIAN_POINT('',(176.987465,-47.817576,1.585)); +#246542 = LINE('',#246543,#246544); +#246543 = CARTESIAN_POINT('',(176.986243,-47.994874,1.585)); +#246544 = VECTOR('',#246545,1.); +#246545 = DIRECTION('',(6.892187028448E-03,0.999976248597,0.)); +#246546 = ORIENTED_EDGE('',*,*,#246547,.T.); +#246547 = EDGE_CURVE('',#246540,#246548,#246550,.T.); +#246548 = VERTEX_POINT('',#246549); +#246549 = CARTESIAN_POINT('',(177.048171,-47.692893,1.585)); +#246550 = LINE('',#246551,#246552); +#246551 = CARTESIAN_POINT('',(176.987465,-47.817576,1.585)); +#246552 = VECTOR('',#246553,1.); +#246553 = DIRECTION('',(0.437753780471,0.899094893592,0.)); +#246554 = ORIENTED_EDGE('',*,*,#246555,.T.); +#246555 = EDGE_CURVE('',#246548,#246556,#246558,.T.); +#246556 = VERTEX_POINT('',#246557); +#246557 = CARTESIAN_POINT('',(177.048171,-47.267592,1.585)); +#246558 = CIRCLE('',#246559,0.347106732746); +#246559 = AXIS2_PLACEMENT_3D('',#246560,#246561,#246562); +#246560 = CARTESIAN_POINT('',(177.32251175302,-47.4802425,1.585)); +#246561 = DIRECTION('',(0.,0.,-1.)); +#246562 = DIRECTION('',(-0.790364251506,-0.612637209073,-0.)); +#246563 = ORIENTED_EDGE('',*,*,#246564,.T.); +#246564 = EDGE_CURVE('',#246556,#246372,#246565,.T.); +#246565 = LINE('',#246566,#246567); +#246566 = CARTESIAN_POINT('',(177.048171,-47.267592,1.585)); +#246567 = VECTOR('',#246568,1.); +#246568 = DIRECTION('',(0.773007961956,0.634396319939,0.)); +#246569 = PLANE('',#246570); +#246570 = AXIS2_PLACEMENT_3D('',#246571,#246572,#246573); +#246571 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246572 = DIRECTION('',(0.,0.,1.)); +#246573 = DIRECTION('',(1.,0.,-0.)); +#246574 = SHELL_BASED_SURFACE_MODEL('',(#246575)); +#246575 = OPEN_SHELL('',(#246576)); +#246576 = ADVANCED_FACE('',(#246577),#246613,.T.); +#246577 = FACE_BOUND('',#246578,.F.); +#246578 = EDGE_LOOP('',(#246579,#246590,#246598,#246607)); +#246579 = ORIENTED_EDGE('',*,*,#246580,.T.); +#246580 = EDGE_CURVE('',#246581,#246583,#246585,.T.); +#246581 = VERTEX_POINT('',#246582); +#246582 = CARTESIAN_POINT('',(145.805398,-48.0931,1.585)); +#246583 = VERTEX_POINT('',#246584); +#246584 = CARTESIAN_POINT('',(145.805398,-47.9731,1.585)); +#246585 = CIRCLE('',#246586,6.000000000042E-02); +#246586 = AXIS2_PLACEMENT_3D('',#246587,#246588,#246589); +#246587 = CARTESIAN_POINT('',(145.80539777441,-48.0331,1.585)); +#246588 = DIRECTION('',(0.,0.,-1.)); +#246589 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#246590 = ORIENTED_EDGE('',*,*,#246591,.T.); +#246591 = EDGE_CURVE('',#246583,#246592,#246594,.T.); +#246592 = VERTEX_POINT('',#246593); +#246593 = CARTESIAN_POINT('',(148.577902,-47.9731,1.585)); +#246594 = LINE('',#246595,#246596); +#246595 = CARTESIAN_POINT('',(145.805398,-47.9731,1.585)); +#246596 = VECTOR('',#246597,1.); +#246597 = DIRECTION('',(1.,0.,0.)); +#246598 = ORIENTED_EDGE('',*,*,#246599,.T.); +#246599 = EDGE_CURVE('',#246592,#246600,#246602,.T.); +#246600 = VERTEX_POINT('',#246601); +#246601 = CARTESIAN_POINT('',(148.577902,-48.0931,1.585)); +#246602 = CIRCLE('',#246603,6.000000000043E-02); +#246603 = AXIS2_PLACEMENT_3D('',#246604,#246605,#246606); +#246604 = CARTESIAN_POINT('',(148.57790222558,-48.0331,1.585)); +#246605 = DIRECTION('',(0.,0.,-1.)); +#246606 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246607 = ORIENTED_EDGE('',*,*,#246608,.T.); +#246608 = EDGE_CURVE('',#246600,#246581,#246609,.T.); +#246609 = LINE('',#246610,#246611); +#246610 = CARTESIAN_POINT('',(148.577902,-48.0931,1.585)); +#246611 = VECTOR('',#246612,1.); +#246612 = DIRECTION('',(-1.,0.,0.)); +#246613 = PLANE('',#246614); +#246614 = AXIS2_PLACEMENT_3D('',#246615,#246616,#246617); +#246615 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246616 = DIRECTION('',(0.,0.,1.)); +#246617 = DIRECTION('',(1.,0.,-0.)); +#246618 = SHELL_BASED_SURFACE_MODEL('',(#246619)); +#246619 = OPEN_SHELL('',(#246620)); +#246620 = ADVANCED_FACE('',(#246621),#246657,.T.); +#246621 = FACE_BOUND('',#246622,.F.); +#246622 = EDGE_LOOP('',(#246623,#246634,#246642,#246651)); +#246623 = ORIENTED_EDGE('',*,*,#246624,.T.); +#246624 = EDGE_CURVE('',#246625,#246627,#246629,.T.); +#246625 = VERTEX_POINT('',#246626); +#246626 = CARTESIAN_POINT('',(194.016892,-47.8606,1.585)); +#246627 = VERTEX_POINT('',#246628); +#246628 = CARTESIAN_POINT('',(194.016892,-47.7406,1.585)); +#246629 = CIRCLE('',#246630,6.000000000042E-02); +#246630 = AXIS2_PLACEMENT_3D('',#246631,#246632,#246633); +#246631 = CARTESIAN_POINT('',(194.01689177441,-47.8006,1.585)); +#246632 = DIRECTION('',(0.,0.,-1.)); +#246633 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246634 = ORIENTED_EDGE('',*,*,#246635,.T.); +#246635 = EDGE_CURVE('',#246627,#246636,#246638,.T.); +#246636 = VERTEX_POINT('',#246637); +#246637 = CARTESIAN_POINT('',(194.491408,-47.7406,1.585)); +#246638 = LINE('',#246639,#246640); +#246639 = CARTESIAN_POINT('',(194.016892,-47.7406,1.585)); +#246640 = VECTOR('',#246641,1.); +#246641 = DIRECTION('',(1.,0.,0.)); +#246642 = ORIENTED_EDGE('',*,*,#246643,.T.); +#246643 = EDGE_CURVE('',#246636,#246644,#246646,.T.); +#246644 = VERTEX_POINT('',#246645); +#246645 = CARTESIAN_POINT('',(194.491408,-47.8606,1.585)); +#246646 = CIRCLE('',#246647,6.000000000043E-02); +#246647 = AXIS2_PLACEMENT_3D('',#246648,#246649,#246650); +#246648 = CARTESIAN_POINT('',(194.49140822558,-47.8006,1.585)); +#246649 = DIRECTION('',(0.,0.,-1.)); +#246650 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246651 = ORIENTED_EDGE('',*,*,#246652,.T.); +#246652 = EDGE_CURVE('',#246644,#246625,#246653,.T.); +#246653 = LINE('',#246654,#246655); +#246654 = CARTESIAN_POINT('',(194.491408,-47.8606,1.585)); +#246655 = VECTOR('',#246656,1.); +#246656 = DIRECTION('',(-1.,0.,0.)); +#246657 = PLANE('',#246658); +#246658 = AXIS2_PLACEMENT_3D('',#246659,#246660,#246661); +#246659 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246660 = DIRECTION('',(0.,0.,1.)); +#246661 = DIRECTION('',(1.,0.,-0.)); +#246662 = SHELL_BASED_SURFACE_MODEL('',(#246663)); +#246663 = OPEN_SHELL('',(#246664)); +#246664 = ADVANCED_FACE('',(#246665),#246701,.T.); +#246665 = FACE_BOUND('',#246666,.F.); +#246666 = EDGE_LOOP('',(#246667,#246678,#246686,#246695)); +#246667 = ORIENTED_EDGE('',*,*,#246668,.T.); +#246668 = EDGE_CURVE('',#246669,#246671,#246673,.T.); +#246669 = VERTEX_POINT('',#246670); +#246670 = CARTESIAN_POINT('',(198.016892,-47.8606,1.585)); +#246671 = VERTEX_POINT('',#246672); +#246672 = CARTESIAN_POINT('',(198.016892,-47.7406,1.585)); +#246673 = CIRCLE('',#246674,6.000000000042E-02); +#246674 = AXIS2_PLACEMENT_3D('',#246675,#246676,#246677); +#246675 = CARTESIAN_POINT('',(198.01689177441,-47.8006,1.585)); +#246676 = DIRECTION('',(0.,0.,-1.)); +#246677 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246678 = ORIENTED_EDGE('',*,*,#246679,.T.); +#246679 = EDGE_CURVE('',#246671,#246680,#246682,.T.); +#246680 = VERTEX_POINT('',#246681); +#246681 = CARTESIAN_POINT('',(198.491408,-47.7406,1.585)); +#246682 = LINE('',#246683,#246684); +#246683 = CARTESIAN_POINT('',(198.016892,-47.7406,1.585)); +#246684 = VECTOR('',#246685,1.); +#246685 = DIRECTION('',(1.,0.,0.)); +#246686 = ORIENTED_EDGE('',*,*,#246687,.T.); +#246687 = EDGE_CURVE('',#246680,#246688,#246690,.T.); +#246688 = VERTEX_POINT('',#246689); +#246689 = CARTESIAN_POINT('',(198.491408,-47.8606,1.585)); +#246690 = CIRCLE('',#246691,6.000000000043E-02); +#246691 = AXIS2_PLACEMENT_3D('',#246692,#246693,#246694); +#246692 = CARTESIAN_POINT('',(198.49140822558,-47.8006,1.585)); +#246693 = DIRECTION('',(0.,0.,-1.)); +#246694 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246695 = ORIENTED_EDGE('',*,*,#246696,.T.); +#246696 = EDGE_CURVE('',#246688,#246669,#246697,.T.); +#246697 = LINE('',#246698,#246699); +#246698 = CARTESIAN_POINT('',(198.491408,-47.8606,1.585)); +#246699 = VECTOR('',#246700,1.); +#246700 = DIRECTION('',(-1.,0.,0.)); +#246701 = PLANE('',#246702); +#246702 = AXIS2_PLACEMENT_3D('',#246703,#246704,#246705); +#246703 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246704 = DIRECTION('',(0.,0.,1.)); +#246705 = DIRECTION('',(1.,0.,-0.)); +#246706 = SHELL_BASED_SURFACE_MODEL('',(#246707)); +#246707 = OPEN_SHELL('',(#246708)); +#246708 = ADVANCED_FACE('',(#246709),#246745,.T.); +#246709 = FACE_BOUND('',#246710,.F.); +#246710 = EDGE_LOOP('',(#246711,#246722,#246730,#246739)); +#246711 = ORIENTED_EDGE('',*,*,#246712,.T.); +#246712 = EDGE_CURVE('',#246713,#246715,#246717,.T.); +#246713 = VERTEX_POINT('',#246714); +#246714 = CARTESIAN_POINT('',(202.016892,-47.8606,1.585)); +#246715 = VERTEX_POINT('',#246716); +#246716 = CARTESIAN_POINT('',(202.016892,-47.7406,1.585)); +#246717 = CIRCLE('',#246718,6.000000000042E-02); +#246718 = AXIS2_PLACEMENT_3D('',#246719,#246720,#246721); +#246719 = CARTESIAN_POINT('',(202.01689177441,-47.8006,1.585)); +#246720 = DIRECTION('',(0.,0.,-1.)); +#246721 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246722 = ORIENTED_EDGE('',*,*,#246723,.T.); +#246723 = EDGE_CURVE('',#246715,#246724,#246726,.T.); +#246724 = VERTEX_POINT('',#246725); +#246725 = CARTESIAN_POINT('',(202.491408,-47.7406,1.585)); +#246726 = LINE('',#246727,#246728); +#246727 = CARTESIAN_POINT('',(202.016892,-47.7406,1.585)); +#246728 = VECTOR('',#246729,1.); +#246729 = DIRECTION('',(1.,0.,0.)); +#246730 = ORIENTED_EDGE('',*,*,#246731,.T.); +#246731 = EDGE_CURVE('',#246724,#246732,#246734,.T.); +#246732 = VERTEX_POINT('',#246733); +#246733 = CARTESIAN_POINT('',(202.491408,-47.8606,1.585)); +#246734 = CIRCLE('',#246735,6.000000000043E-02); +#246735 = AXIS2_PLACEMENT_3D('',#246736,#246737,#246738); +#246736 = CARTESIAN_POINT('',(202.49140822558,-47.8006,1.585)); +#246737 = DIRECTION('',(0.,0.,-1.)); +#246738 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246739 = ORIENTED_EDGE('',*,*,#246740,.T.); +#246740 = EDGE_CURVE('',#246732,#246713,#246741,.T.); +#246741 = LINE('',#246742,#246743); +#246742 = CARTESIAN_POINT('',(202.491408,-47.8606,1.585)); +#246743 = VECTOR('',#246744,1.); +#246744 = DIRECTION('',(-1.,0.,0.)); +#246745 = PLANE('',#246746); +#246746 = AXIS2_PLACEMENT_3D('',#246747,#246748,#246749); +#246747 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246748 = DIRECTION('',(0.,0.,1.)); +#246749 = DIRECTION('',(1.,0.,-0.)); +#246750 = SHELL_BASED_SURFACE_MODEL('',(#246751)); +#246751 = OPEN_SHELL('',(#246752)); +#246752 = ADVANCED_FACE('',(#246753),#246789,.T.); +#246753 = FACE_BOUND('',#246754,.F.); +#246754 = EDGE_LOOP('',(#246755,#246766,#246774,#246783)); +#246755 = ORIENTED_EDGE('',*,*,#246756,.T.); +#246756 = EDGE_CURVE('',#246757,#246759,#246761,.T.); +#246757 = VERTEX_POINT('',#246758); +#246758 = CARTESIAN_POINT('',(206.016892,-47.8606,1.585)); +#246759 = VERTEX_POINT('',#246760); +#246760 = CARTESIAN_POINT('',(206.016892,-47.7406,1.585)); +#246761 = CIRCLE('',#246762,6.000000000042E-02); +#246762 = AXIS2_PLACEMENT_3D('',#246763,#246764,#246765); +#246763 = CARTESIAN_POINT('',(206.01689177441,-47.8006,1.585)); +#246764 = DIRECTION('',(0.,0.,-1.)); +#246765 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#246766 = ORIENTED_EDGE('',*,*,#246767,.T.); +#246767 = EDGE_CURVE('',#246759,#246768,#246770,.T.); +#246768 = VERTEX_POINT('',#246769); +#246769 = CARTESIAN_POINT('',(206.491408,-47.7406,1.585)); +#246770 = LINE('',#246771,#246772); +#246771 = CARTESIAN_POINT('',(206.016892,-47.7406,1.585)); +#246772 = VECTOR('',#246773,1.); +#246773 = DIRECTION('',(1.,0.,0.)); +#246774 = ORIENTED_EDGE('',*,*,#246775,.T.); +#246775 = EDGE_CURVE('',#246768,#246776,#246778,.T.); +#246776 = VERTEX_POINT('',#246777); +#246777 = CARTESIAN_POINT('',(206.491408,-47.8606,1.585)); +#246778 = CIRCLE('',#246779,6.000000000043E-02); +#246779 = AXIS2_PLACEMENT_3D('',#246780,#246781,#246782); +#246780 = CARTESIAN_POINT('',(206.49140822558,-47.8006,1.585)); +#246781 = DIRECTION('',(0.,0.,-1.)); +#246782 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#246783 = ORIENTED_EDGE('',*,*,#246784,.T.); +#246784 = EDGE_CURVE('',#246776,#246757,#246785,.T.); +#246785 = LINE('',#246786,#246787); +#246786 = CARTESIAN_POINT('',(206.491408,-47.8606,1.585)); +#246787 = VECTOR('',#246788,1.); +#246788 = DIRECTION('',(-1.,0.,0.)); +#246789 = PLANE('',#246790); +#246790 = AXIS2_PLACEMENT_3D('',#246791,#246792,#246793); +#246791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246792 = DIRECTION('',(0.,0.,1.)); +#246793 = DIRECTION('',(1.,0.,-0.)); +#246794 = SHELL_BASED_SURFACE_MODEL('',(#246795)); +#246795 = OPEN_SHELL('',(#246796)); +#246796 = ADVANCED_FACE('',(#246797),#246931,.T.); +#246797 = FACE_BOUND('',#246798,.F.); +#246798 = EDGE_LOOP('',(#246799,#246809,#246817,#246826,#246834,#246842, + #246851,#246859,#246868,#246876,#246884,#246892,#246900,#246909, + #246917,#246925)); +#246799 = ORIENTED_EDGE('',*,*,#246800,.T.); +#246800 = EDGE_CURVE('',#246801,#246803,#246805,.T.); +#246801 = VERTEX_POINT('',#246802); +#246802 = CARTESIAN_POINT('',(195.201062,-46.294941,1.585)); +#246803 = VERTEX_POINT('',#246804); +#246804 = CARTESIAN_POINT('',(195.239518,-46.27436,1.585)); +#246805 = LINE('',#246806,#246807); +#246806 = CARTESIAN_POINT('',(195.201062,-46.294941,1.585)); +#246807 = VECTOR('',#246808,1.); +#246808 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#246809 = ORIENTED_EDGE('',*,*,#246810,.T.); +#246810 = EDGE_CURVE('',#246803,#246811,#246813,.T.); +#246811 = VERTEX_POINT('',#246812); +#246812 = CARTESIAN_POINT('',(195.261355,-46.27436,1.585)); +#246813 = LINE('',#246814,#246815); +#246814 = CARTESIAN_POINT('',(195.239518,-46.27436,1.585)); +#246815 = VECTOR('',#246816,1.); +#246816 = DIRECTION('',(1.,0.,0.)); +#246817 = ORIENTED_EDGE('',*,*,#246818,.T.); +#246818 = EDGE_CURVE('',#246811,#246819,#246821,.T.); +#246819 = VERTEX_POINT('',#246820); +#246820 = CARTESIAN_POINT('',(195.32915,-46.347919,1.585)); +#246821 = CIRCLE('',#246822,7.216898094224E-02); +#246822 = AXIS2_PLACEMENT_3D('',#246823,#246824,#246825); +#246823 = CARTESIAN_POINT('',(195.25699706389,-46.34639728342,1.585)); +#246824 = DIRECTION('',(0.,0.,-1.)); +#246825 = DIRECTION('',(6.038516895228E-02,0.998175150648,0.)); +#246826 = ORIENTED_EDGE('',*,*,#246827,.T.); +#246827 = EDGE_CURVE('',#246819,#246828,#246830,.T.); +#246828 = VERTEX_POINT('',#246829); +#246829 = CARTESIAN_POINT('',(195.32915,-47.272919,1.585)); +#246830 = LINE('',#246831,#246832); +#246831 = CARTESIAN_POINT('',(195.32915,-46.347919,1.585)); +#246832 = VECTOR('',#246833,1.); +#246833 = DIRECTION('',(0.,-1.,0.)); +#246834 = ORIENTED_EDGE('',*,*,#246835,.T.); +#246835 = EDGE_CURVE('',#246828,#246836,#246838,.T.); +#246836 = VERTEX_POINT('',#246837); +#246837 = CARTESIAN_POINT('',(195.554496,-47.27436,1.585)); +#246838 = LINE('',#246839,#246840); +#246839 = CARTESIAN_POINT('',(195.32915,-47.272919,1.585)); +#246840 = VECTOR('',#246841,1.); +#246841 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#246842 = ORIENTED_EDGE('',*,*,#246843,.T.); +#246843 = EDGE_CURVE('',#246836,#246844,#246846,.T.); +#246844 = VERTEX_POINT('',#246845); +#246845 = CARTESIAN_POINT('',(195.539864,-47.422919,1.585)); +#246846 = CIRCLE('',#246847,7.500006711464E-02); +#246847 = AXIS2_PLACEMENT_3D('',#246848,#246849,#246850); +#246848 = CARTESIAN_POINT('',(195.53986406711,-47.34791893288,1.585)); +#246849 = DIRECTION('',(0.,0.,-1.)); +#246850 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#246851 = ORIENTED_EDGE('',*,*,#246852,.T.); +#246852 = EDGE_CURVE('',#246844,#246853,#246855,.T.); +#246853 = VERTEX_POINT('',#246854); +#246854 = CARTESIAN_POINT('',(194.953804,-47.421478,1.585)); +#246855 = LINE('',#246856,#246857); +#246856 = CARTESIAN_POINT('',(195.539864,-47.422919,1.585)); +#246857 = VECTOR('',#246858,1.); +#246858 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#246859 = ORIENTED_EDGE('',*,*,#246860,.T.); +#246860 = EDGE_CURVE('',#246853,#246861,#246863,.T.); +#246861 = VERTEX_POINT('',#246862); +#246862 = CARTESIAN_POINT('',(194.968436,-47.272919,1.585)); +#246863 = CIRCLE('',#246864,7.500006711464E-02); +#246864 = AXIS2_PLACEMENT_3D('',#246865,#246866,#246867); +#246865 = CARTESIAN_POINT('',(194.96843593288,-47.34791906711,1.585)); +#246866 = DIRECTION('',(0.,0.,-1.)); +#246867 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#246868 = ORIENTED_EDGE('',*,*,#246869,.T.); +#246869 = EDGE_CURVE('',#246861,#246870,#246872,.T.); +#246870 = VERTEX_POINT('',#246871); +#246871 = CARTESIAN_POINT('',(195.17915,-47.272919,1.585)); +#246872 = LINE('',#246873,#246874); +#246873 = CARTESIAN_POINT('',(194.968436,-47.272919,1.585)); +#246874 = VECTOR('',#246875,1.); +#246875 = DIRECTION('',(1.,0.,0.)); +#246876 = ORIENTED_EDGE('',*,*,#246877,.T.); +#246877 = EDGE_CURVE('',#246870,#246878,#246880,.T.); +#246878 = VERTEX_POINT('',#246879); +#246879 = CARTESIAN_POINT('',(195.17915,-46.576604,1.585)); +#246880 = LINE('',#246881,#246882); +#246881 = CARTESIAN_POINT('',(195.17915,-47.272919,1.585)); +#246882 = VECTOR('',#246883,1.); +#246883 = DIRECTION('',(0.,1.,0.)); +#246884 = ORIENTED_EDGE('',*,*,#246885,.T.); +#246885 = EDGE_CURVE('',#246878,#246886,#246888,.T.); +#246886 = VERTEX_POINT('',#246887); +#246887 = CARTESIAN_POINT('',(195.103514,-46.649131,1.585)); +#246888 = LINE('',#246889,#246890); +#246889 = CARTESIAN_POINT('',(195.17915,-46.576604,1.585)); +#246890 = VECTOR('',#246891,1.); +#246891 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#246892 = ORIENTED_EDGE('',*,*,#246893,.T.); +#246893 = EDGE_CURVE('',#246886,#246894,#246896,.T.); +#246894 = VERTEX_POINT('',#246895); +#246895 = CARTESIAN_POINT('',(194.988245,-46.70597,1.585)); +#246896 = LINE('',#246897,#246898); +#246897 = CARTESIAN_POINT('',(195.103514,-46.649131,1.585)); +#246898 = VECTOR('',#246899,1.); +#246899 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#246900 = ORIENTED_EDGE('',*,*,#246901,.T.); +#246901 = EDGE_CURVE('',#246894,#246902,#246904,.T.); +#246902 = VERTEX_POINT('',#246903); +#246903 = CARTESIAN_POINT('',(194.934895,-46.566551,1.585)); +#246904 = CIRCLE('',#246905,7.500005272361E-02); +#246905 = AXIS2_PLACEMENT_3D('',#246906,#246907,#246908); +#246906 = CARTESIAN_POINT('',(194.96843555676,-46.63363332972,1.585)); +#246907 = DIRECTION('',(0.,0.,-1.)); +#246908 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#246909 = ORIENTED_EDGE('',*,*,#246910,.T.); +#246910 = EDGE_CURVE('',#246902,#246911,#246913,.T.); +#246911 = VERTEX_POINT('',#246912); +#246912 = CARTESIAN_POINT('',(195.019247,-46.524375,1.585)); +#246913 = LINE('',#246914,#246915); +#246914 = CARTESIAN_POINT('',(194.934895,-46.566551,1.585)); +#246915 = VECTOR('',#246916,1.); +#246916 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#246917 = ORIENTED_EDGE('',*,*,#246918,.T.); +#246918 = EDGE_CURVE('',#246911,#246919,#246921,.T.); +#246919 = VERTEX_POINT('',#246920); +#246920 = CARTESIAN_POINT('',(195.100626,-46.442996,1.585)); +#246921 = LINE('',#246922,#246923); +#246922 = CARTESIAN_POINT('',(195.019247,-46.524375,1.585)); +#246923 = VECTOR('',#246924,1.); +#246924 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246925 = ORIENTED_EDGE('',*,*,#246926,.T.); +#246926 = EDGE_CURVE('',#246919,#246801,#246927,.T.); +#246927 = LINE('',#246928,#246929); +#246928 = CARTESIAN_POINT('',(195.100626,-46.442996,1.585)); +#246929 = VECTOR('',#246930,1.); +#246930 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#246931 = PLANE('',#246932); +#246932 = AXIS2_PLACEMENT_3D('',#246933,#246934,#246935); +#246933 = CARTESIAN_POINT('',(0.,0.,1.585)); +#246934 = DIRECTION('',(0.,0.,1.)); +#246935 = DIRECTION('',(1.,0.,-0.)); +#246936 = SHELL_BASED_SURFACE_MODEL('',(#246937)); +#246937 = OPEN_SHELL('',(#246938)); +#246938 = ADVANCED_FACE('',(#246939),#247098,.T.); +#246939 = FACE_BOUND('',#246940,.F.); +#246940 = EDGE_LOOP('',(#246941,#246952,#246960,#246968,#246976,#246984, + #246992,#247000,#247009,#247017,#247026,#247034,#247042,#247050, + #247059,#247067,#247075,#247083,#247092)); +#246941 = ORIENTED_EDGE('',*,*,#246942,.T.); +#246942 = EDGE_CURVE('',#246943,#246945,#246947,.T.); +#246943 = VERTEX_POINT('',#246944); +#246944 = CARTESIAN_POINT('',(198.982514,-46.328456,1.585)); +#246945 = VERTEX_POINT('',#246946); +#246946 = CARTESIAN_POINT('',(199.491909,-46.337786,1.585)); +#246947 = CIRCLE('',#246948,0.450326844012); +#246948 = AXIS2_PLACEMENT_3D('',#246949,#246950,#246951); +#246949 = CARTESIAN_POINT('',(199.2304110301,-46.70440989199,1.585)); +#246950 = DIRECTION('',(0.,0.,-1.)); +#246951 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#246952 = ORIENTED_EDGE('',*,*,#246953,.T.); +#246953 = EDGE_CURVE('',#246945,#246954,#246956,.T.); +#246954 = VERTEX_POINT('',#246955); +#246955 = CARTESIAN_POINT('',(199.555362,-46.403316,1.585)); +#246956 = LINE('',#246957,#246958); +#246957 = CARTESIAN_POINT('',(199.491909,-46.337786,1.585)); +#246958 = VECTOR('',#246959,1.); +#246959 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#246960 = ORIENTED_EDGE('',*,*,#246961,.T.); +#246961 = EDGE_CURVE('',#246954,#246962,#246964,.T.); +#246962 = VERTEX_POINT('',#246963); +#246963 = CARTESIAN_POINT('',(199.613423,-46.523763,1.585)); +#246964 = LINE('',#246965,#246966); +#246965 = CARTESIAN_POINT('',(199.555362,-46.403316,1.585)); +#246966 = VECTOR('',#246967,1.); +#246967 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#246968 = ORIENTED_EDGE('',*,*,#246969,.T.); +#246969 = EDGE_CURVE('',#246962,#246970,#246972,.T.); +#246970 = VERTEX_POINT('',#246971); +#246971 = CARTESIAN_POINT('',(199.612664,-46.650095,1.585)); +#246972 = LINE('',#246973,#246974); +#246973 = CARTESIAN_POINT('',(199.613423,-46.523763,1.585)); +#246974 = VECTOR('',#246975,1.); +#246975 = DIRECTION('',(-6.007870547659E-03,-0.999981952583,0.)); +#246976 = ORIENTED_EDGE('',*,*,#246977,.T.); +#246977 = EDGE_CURVE('',#246970,#246978,#246980,.T.); +#246978 = VERTEX_POINT('',#246979); +#246979 = CARTESIAN_POINT('',(199.554606,-46.818158,1.585)); +#246980 = LINE('',#246981,#246982); +#246981 = CARTESIAN_POINT('',(199.612664,-46.650095,1.585)); +#246982 = VECTOR('',#246983,1.); +#246983 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#246984 = ORIENTED_EDGE('',*,*,#246985,.T.); +#246985 = EDGE_CURVE('',#246978,#246986,#246988,.T.); +#246986 = VERTEX_POINT('',#246987); +#246987 = CARTESIAN_POINT('',(199.101883,-47.272919,1.585)); +#246988 = LINE('',#246989,#246990); +#246989 = CARTESIAN_POINT('',(199.554606,-46.818158,1.585)); +#246990 = VECTOR('',#246991,1.); +#246991 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#246992 = ORIENTED_EDGE('',*,*,#246993,.T.); +#246993 = EDGE_CURVE('',#246986,#246994,#246996,.T.); +#246994 = VERTEX_POINT('',#246995); +#246995 = CARTESIAN_POINT('',(199.554496,-47.27436,1.585)); +#246996 = LINE('',#246997,#246998); +#246997 = CARTESIAN_POINT('',(199.101883,-47.272919,1.585)); +#246998 = VECTOR('',#246999,1.); +#246999 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#247000 = ORIENTED_EDGE('',*,*,#247001,.T.); +#247001 = EDGE_CURVE('',#246994,#247002,#247004,.T.); +#247002 = VERTEX_POINT('',#247003); +#247003 = CARTESIAN_POINT('',(199.539864,-47.422919,1.585)); +#247004 = CIRCLE('',#247005,7.500006711464E-02); +#247005 = AXIS2_PLACEMENT_3D('',#247006,#247007,#247008); +#247006 = CARTESIAN_POINT('',(199.53986406711,-47.34791893288,1.585)); +#247007 = DIRECTION('',(0.,0.,-1.)); +#247008 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#247009 = ORIENTED_EDGE('',*,*,#247010,.T.); +#247010 = EDGE_CURVE('',#247002,#247011,#247013,.T.); +#247011 = VERTEX_POINT('',#247012); +#247012 = CARTESIAN_POINT('',(198.906185,-47.421478,1.585)); +#247013 = LINE('',#247014,#247015); +#247014 = CARTESIAN_POINT('',(199.539864,-47.422919,1.585)); +#247015 = VECTOR('',#247016,1.); +#247016 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#247017 = ORIENTED_EDGE('',*,*,#247018,.T.); +#247018 = EDGE_CURVE('',#247011,#247019,#247021,.T.); +#247019 = VERTEX_POINT('',#247020); +#247020 = CARTESIAN_POINT('',(198.867784,-47.294886,1.585)); +#247021 = CIRCLE('',#247022,7.500021013109E-02); +#247022 = AXIS2_PLACEMENT_3D('',#247023,#247024,#247025); +#247023 = CARTESIAN_POINT('',(198.9208173167,-47.34791899764,1.585)); +#247024 = DIRECTION('',(0.,0.,-1.)); +#247025 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#247026 = ORIENTED_EDGE('',*,*,#247027,.T.); +#247027 = EDGE_CURVE('',#247019,#247028,#247030,.T.); +#247028 = VERTEX_POINT('',#247029); +#247029 = CARTESIAN_POINT('',(199.426692,-46.735976,1.585)); +#247030 = LINE('',#247031,#247032); +#247031 = CARTESIAN_POINT('',(198.867784,-47.294886,1.585)); +#247032 = VECTOR('',#247033,1.); +#247033 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#247034 = ORIENTED_EDGE('',*,*,#247035,.T.); +#247035 = EDGE_CURVE('',#247028,#247036,#247038,.T.); +#247036 = VERTEX_POINT('',#247037); +#247037 = CARTESIAN_POINT('',(199.464864,-46.621463,1.585)); +#247038 = LINE('',#247039,#247040); +#247039 = CARTESIAN_POINT('',(199.426692,-46.735976,1.585)); +#247040 = VECTOR('',#247041,1.); +#247041 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#247042 = ORIENTED_EDGE('',*,*,#247043,.T.); +#247043 = EDGE_CURVE('',#247036,#247044,#247046,.T.); +#247044 = VERTEX_POINT('',#247045); +#247045 = CARTESIAN_POINT('',(199.464864,-46.5561,1.585)); +#247046 = LINE('',#247047,#247048); +#247047 = CARTESIAN_POINT('',(199.464864,-46.621463,1.585)); +#247048 = VECTOR('',#247049,1.); +#247049 = DIRECTION('',(0.,1.,0.)); +#247050 = ORIENTED_EDGE('',*,*,#247051,.T.); +#247051 = EDGE_CURVE('',#247044,#247052,#247054,.T.); +#247052 = VERTEX_POINT('',#247053); +#247053 = CARTESIAN_POINT('',(199.331683,-46.422919,1.585)); +#247054 = CIRCLE('',#247055,0.18686440374); +#247055 = AXIS2_PLACEMENT_3D('',#247056,#247057,#247058); +#247056 = CARTESIAN_POINT('',(199.284147,-46.603636,1.585)); +#247057 = DIRECTION('',(0.,0.,1.)); +#247058 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247059 = ORIENTED_EDGE('',*,*,#247060,.T.); +#247060 = EDGE_CURVE('',#247052,#247061,#247063,.T.); +#247061 = VERTEX_POINT('',#247062); +#247062 = CARTESIAN_POINT('',(199.128998,-46.422919,1.585)); +#247063 = LINE('',#247064,#247065); +#247064 = CARTESIAN_POINT('',(199.331683,-46.422919,1.585)); +#247065 = VECTOR('',#247066,1.); +#247066 = DIRECTION('',(-1.,0.,0.)); +#247067 = ORIENTED_EDGE('',*,*,#247068,.T.); +#247068 = EDGE_CURVE('',#247061,#247069,#247071,.T.); +#247069 = VERTEX_POINT('',#247070); +#247070 = CARTESIAN_POINT('',(199.060482,-46.457177,1.585)); +#247071 = LINE('',#247072,#247073); +#247072 = CARTESIAN_POINT('',(199.128998,-46.422919,1.585)); +#247073 = VECTOR('',#247074,1.); +#247074 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#247075 = ORIENTED_EDGE('',*,*,#247076,.T.); +#247076 = EDGE_CURVE('',#247069,#247077,#247079,.T.); +#247077 = VERTEX_POINT('',#247078); +#247078 = CARTESIAN_POINT('',(199.010104,-46.505517,1.585)); +#247079 = LINE('',#247080,#247081); +#247080 = CARTESIAN_POINT('',(199.060482,-46.457177,1.585)); +#247081 = VECTOR('',#247082,1.); +#247082 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#247083 = ORIENTED_EDGE('',*,*,#247084,.T.); +#247084 = EDGE_CURVE('',#247077,#247085,#247087,.T.); +#247085 = VERTEX_POINT('',#247086); +#247086 = CARTESIAN_POINT('',(198.915403,-46.390124,1.585)); +#247087 = CIRCLE('',#247088,7.499996838527E-02); +#247088 = AXIS2_PLACEMENT_3D('',#247089,#247090,#247091); +#247089 = CARTESIAN_POINT('',(198.968436,-46.44315697246,1.585)); +#247090 = DIRECTION('',(0.,0.,-1.)); +#247091 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#247092 = ORIENTED_EDGE('',*,*,#247093,.T.); +#247093 = EDGE_CURVE('',#247085,#246943,#247094,.T.); +#247094 = LINE('',#247095,#247096); +#247095 = CARTESIAN_POINT('',(198.915403,-46.390124,1.585)); +#247096 = VECTOR('',#247097,1.); +#247097 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#247098 = PLANE('',#247099); +#247099 = AXIS2_PLACEMENT_3D('',#247100,#247101,#247102); +#247100 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247101 = DIRECTION('',(0.,0.,1.)); +#247102 = DIRECTION('',(1.,0.,-0.)); +#247103 = SHELL_BASED_SURFACE_MODEL('',(#247104)); +#247104 = OPEN_SHELL('',(#247105)); +#247105 = ADVANCED_FACE('',(#247106,#247217),#247269,.T.); +#247106 = FACE_BOUND('',#247107,.F.); +#247107 = EDGE_LOOP('',(#247108,#247119,#247127,#247136,#247144,#247153, + #247161,#247169,#247178,#247186,#247194,#247202,#247211)); +#247108 = ORIENTED_EDGE('',*,*,#247109,.T.); +#247109 = EDGE_CURVE('',#247110,#247112,#247114,.T.); +#247110 = VERTEX_POINT('',#247111); +#247111 = CARTESIAN_POINT('',(192.942496,-46.333287,1.585)); +#247112 = VERTEX_POINT('',#247113); +#247113 = CARTESIAN_POINT('',(193.016055,-46.272919,1.585)); +#247114 = CIRCLE('',#247115,7.500074938986E-02); +#247115 = AXIS2_PLACEMENT_3D('',#247116,#247117,#247118); +#247116 = CARTESIAN_POINT('',(193.01605546611,-46.34791974938,1.585)); +#247117 = DIRECTION('',(0.,0.,-1.)); +#247118 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247119 = ORIENTED_EDGE('',*,*,#247120,.T.); +#247120 = EDGE_CURVE('',#247112,#247121,#247123,.T.); +#247121 = VERTEX_POINT('',#247122); +#247122 = CARTESIAN_POINT('',(193.411639,-46.27436,1.585)); +#247123 = LINE('',#247124,#247125); +#247124 = CARTESIAN_POINT('',(193.016055,-46.272919,1.585)); +#247125 = VECTOR('',#247126,1.); +#247126 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247127 = ORIENTED_EDGE('',*,*,#247128,.T.); +#247128 = EDGE_CURVE('',#247121,#247129,#247131,.T.); +#247129 = VERTEX_POINT('',#247130); +#247130 = CARTESIAN_POINT('',(193.661042,-46.523763,1.585)); +#247131 = CIRCLE('',#247132,0.347870264855); +#247132 = AXIS2_PLACEMENT_3D('',#247133,#247134,#247135); +#247133 = CARTESIAN_POINT('',(193.32431126502,-46.61109073497,1.585)); +#247134 = DIRECTION('',(0.,0.,-1.)); +#247135 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247136 = ORIENTED_EDGE('',*,*,#247137,.T.); +#247137 = EDGE_CURVE('',#247129,#247138,#247140,.T.); +#247138 = VERTEX_POINT('',#247139); +#247139 = CARTESIAN_POINT('',(193.65982,-46.701062,1.585)); +#247140 = LINE('',#247141,#247142); +#247141 = CARTESIAN_POINT('',(193.661042,-46.523763,1.585)); +#247142 = VECTOR('',#247143,1.); +#247143 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247144 = ORIENTED_EDGE('',*,*,#247145,.T.); +#247145 = EDGE_CURVE('',#247138,#247146,#247148,.T.); +#247146 = VERTEX_POINT('',#247147); +#247147 = CARTESIAN_POINT('',(193.411639,-46.945287,1.585)); +#247148 = CIRCLE('',#247149,0.348632345849); +#247149 = AXIS2_PLACEMENT_3D('',#247150,#247151,#247152); +#247150 = CARTESIAN_POINT('',(193.32387019403,-46.6078834593,1.585)); +#247151 = DIRECTION('',(0.,0.,-1.)); +#247152 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247153 = ORIENTED_EDGE('',*,*,#247154,.T.); +#247154 = EDGE_CURVE('',#247146,#247155,#247157,.T.); +#247155 = VERTEX_POINT('',#247156); +#247156 = CARTESIAN_POINT('',(193.398122,-46.946618,1.585)); +#247157 = LINE('',#247158,#247159); +#247158 = CARTESIAN_POINT('',(193.411639,-46.945287,1.585)); +#247159 = VECTOR('',#247160,1.); +#247160 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247161 = ORIENTED_EDGE('',*,*,#247162,.T.); +#247162 = EDGE_CURVE('',#247155,#247163,#247165,.T.); +#247163 = VERTEX_POINT('',#247164); +#247164 = CARTESIAN_POINT('',(193.656136,-47.317723,1.585)); +#247165 = LINE('',#247166,#247167); +#247166 = CARTESIAN_POINT('',(193.398122,-46.946618,1.585)); +#247167 = VECTOR('',#247168,1.); +#247168 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247169 = ORIENTED_EDGE('',*,*,#247170,.T.); +#247170 = EDGE_CURVE('',#247163,#247171,#247173,.T.); +#247171 = VERTEX_POINT('',#247172); +#247172 = CARTESIAN_POINT('',(193.526041,-47.390929,1.585)); +#247173 = CIRCLE('',#247174,7.500005951702E-02); +#247174 = AXIS2_PLACEMENT_3D('',#247175,#247176,#247177); +#247175 = CARTESIAN_POINT('',(193.58748306294,-47.34791874739,1.585)); +#247176 = DIRECTION('',(0.,0.,-1.)); +#247177 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247178 = ORIENTED_EDGE('',*,*,#247179,.T.); +#247179 = EDGE_CURVE('',#247171,#247180,#247182,.T.); +#247180 = VERTEX_POINT('',#247181); +#247181 = CARTESIAN_POINT('',(193.215101,-46.946728,1.585)); +#247182 = LINE('',#247183,#247184); +#247183 = CARTESIAN_POINT('',(193.526041,-47.390929,1.585)); +#247184 = VECTOR('',#247185,1.); +#247185 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247186 = ORIENTED_EDGE('',*,*,#247187,.T.); +#247187 = EDGE_CURVE('',#247180,#247188,#247190,.T.); +#247188 = VERTEX_POINT('',#247189); +#247189 = CARTESIAN_POINT('',(193.091055,-46.946728,1.585)); +#247190 = LINE('',#247191,#247192); +#247191 = CARTESIAN_POINT('',(193.215101,-46.946728,1.585)); +#247192 = VECTOR('',#247193,1.); +#247193 = DIRECTION('',(-1.,0.,0.)); +#247194 = ORIENTED_EDGE('',*,*,#247195,.T.); +#247195 = EDGE_CURVE('',#247188,#247196,#247198,.T.); +#247196 = VERTEX_POINT('',#247197); +#247197 = CARTESIAN_POINT('',(193.089614,-47.362551,1.585)); +#247198 = LINE('',#247199,#247200); +#247199 = CARTESIAN_POINT('',(193.091055,-46.946728,1.585)); +#247200 = VECTOR('',#247201,1.); +#247201 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247202 = ORIENTED_EDGE('',*,*,#247203,.T.); +#247203 = EDGE_CURVE('',#247196,#247204,#247206,.T.); +#247204 = VERTEX_POINT('',#247205); +#247205 = CARTESIAN_POINT('',(192.941055,-47.347919,1.585)); +#247206 = CIRCLE('',#247207,7.500006711464E-02); +#247207 = AXIS2_PLACEMENT_3D('',#247208,#247209,#247210); +#247208 = CARTESIAN_POINT('',(193.01605506711,-47.34791906711,1.585)); +#247209 = DIRECTION('',(-0.,0.,-1.)); +#247210 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247211 = ORIENTED_EDGE('',*,*,#247212,.T.); +#247212 = EDGE_CURVE('',#247204,#247110,#247213,.T.); +#247213 = LINE('',#247214,#247215); +#247214 = CARTESIAN_POINT('',(192.941055,-47.347919,1.585)); +#247215 = VECTOR('',#247216,1.); +#247216 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247217 = FACE_BOUND('',#247218,.F.); +#247218 = EDGE_LOOP('',(#247219,#247230,#247238,#247246,#247254,#247263) + ); +#247219 = ORIENTED_EDGE('',*,*,#247220,.T.); +#247220 = EDGE_CURVE('',#247221,#247223,#247225,.T.); +#247221 = VERTEX_POINT('',#247222); +#247222 = CARTESIAN_POINT('',(193.512483,-46.5561,1.585)); +#247223 = VERTEX_POINT('',#247224); +#247224 = CARTESIAN_POINT('',(193.379302,-46.422919,1.585)); +#247225 = CIRCLE('',#247226,0.18686440374); +#247226 = AXIS2_PLACEMENT_3D('',#247227,#247228,#247229); +#247227 = CARTESIAN_POINT('',(193.331766,-46.603636,1.585)); +#247228 = DIRECTION('',(0.,0.,1.)); +#247229 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247230 = ORIENTED_EDGE('',*,*,#247231,.T.); +#247231 = EDGE_CURVE('',#247223,#247232,#247234,.T.); +#247232 = VERTEX_POINT('',#247233); +#247233 = CARTESIAN_POINT('',(193.091055,-46.422919,1.585)); +#247234 = LINE('',#247235,#247236); +#247235 = CARTESIAN_POINT('',(193.379302,-46.422919,1.585)); +#247236 = VECTOR('',#247237,1.); +#247237 = DIRECTION('',(-1.,0.,0.)); +#247238 = ORIENTED_EDGE('',*,*,#247239,.T.); +#247239 = EDGE_CURVE('',#247232,#247240,#247242,.T.); +#247240 = VERTEX_POINT('',#247241); +#247241 = CARTESIAN_POINT('',(193.091055,-46.796728,1.585)); +#247242 = LINE('',#247243,#247244); +#247243 = CARTESIAN_POINT('',(193.091055,-46.422919,1.585)); +#247244 = VECTOR('',#247245,1.); +#247245 = DIRECTION('',(0.,-1.,0.)); +#247246 = ORIENTED_EDGE('',*,*,#247247,.T.); +#247247 = EDGE_CURVE('',#247240,#247248,#247250,.T.); +#247248 = VERTEX_POINT('',#247249); +#247249 = CARTESIAN_POINT('',(193.379302,-46.796728,1.585)); +#247250 = LINE('',#247251,#247252); +#247251 = CARTESIAN_POINT('',(193.091055,-46.796728,1.585)); +#247252 = VECTOR('',#247253,1.); +#247253 = DIRECTION('',(1.,0.,0.)); +#247254 = ORIENTED_EDGE('',*,*,#247255,.T.); +#247255 = EDGE_CURVE('',#247248,#247256,#247258,.T.); +#247256 = VERTEX_POINT('',#247257); +#247257 = CARTESIAN_POINT('',(193.512483,-46.663547,1.585)); +#247258 = CIRCLE('',#247259,0.18686440374); +#247259 = AXIS2_PLACEMENT_3D('',#247260,#247261,#247262); +#247260 = CARTESIAN_POINT('',(193.331766,-46.616011,1.585)); +#247261 = DIRECTION('',(0.,0.,1.)); +#247262 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247263 = ORIENTED_EDGE('',*,*,#247264,.T.); +#247264 = EDGE_CURVE('',#247256,#247221,#247265,.T.); +#247265 = LINE('',#247266,#247267); +#247266 = CARTESIAN_POINT('',(193.512483,-46.663547,1.585)); +#247267 = VECTOR('',#247268,1.); +#247268 = DIRECTION('',(0.,1.,0.)); +#247269 = PLANE('',#247270); +#247270 = AXIS2_PLACEMENT_3D('',#247271,#247272,#247273); +#247271 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247272 = DIRECTION('',(0.,0.,1.)); +#247273 = DIRECTION('',(1.,0.,-0.)); +#247274 = SHELL_BASED_SURFACE_MODEL('',(#247275)); +#247275 = OPEN_SHELL('',(#247276)); +#247276 = ADVANCED_FACE('',(#247277,#247388),#247440,.T.); +#247277 = FACE_BOUND('',#247278,.F.); +#247278 = EDGE_LOOP('',(#247279,#247290,#247298,#247307,#247315,#247324, + #247332,#247340,#247349,#247357,#247365,#247373,#247382)); +#247279 = ORIENTED_EDGE('',*,*,#247280,.T.); +#247280 = EDGE_CURVE('',#247281,#247283,#247285,.T.); +#247281 = VERTEX_POINT('',#247282); +#247282 = CARTESIAN_POINT('',(196.942496,-46.333287,1.585)); +#247283 = VERTEX_POINT('',#247284); +#247284 = CARTESIAN_POINT('',(197.016055,-46.272919,1.585)); +#247285 = CIRCLE('',#247286,7.500074938986E-02); +#247286 = AXIS2_PLACEMENT_3D('',#247287,#247288,#247289); +#247287 = CARTESIAN_POINT('',(197.01605546611,-46.34791974938,1.585)); +#247288 = DIRECTION('',(0.,0.,-1.)); +#247289 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247290 = ORIENTED_EDGE('',*,*,#247291,.T.); +#247291 = EDGE_CURVE('',#247283,#247292,#247294,.T.); +#247292 = VERTEX_POINT('',#247293); +#247293 = CARTESIAN_POINT('',(197.411639,-46.27436,1.585)); +#247294 = LINE('',#247295,#247296); +#247295 = CARTESIAN_POINT('',(197.016055,-46.272919,1.585)); +#247296 = VECTOR('',#247297,1.); +#247297 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247298 = ORIENTED_EDGE('',*,*,#247299,.T.); +#247299 = EDGE_CURVE('',#247292,#247300,#247302,.T.); +#247300 = VERTEX_POINT('',#247301); +#247301 = CARTESIAN_POINT('',(197.661042,-46.523763,1.585)); +#247302 = CIRCLE('',#247303,0.347870264855); +#247303 = AXIS2_PLACEMENT_3D('',#247304,#247305,#247306); +#247304 = CARTESIAN_POINT('',(197.32431126502,-46.61109073497,1.585)); +#247305 = DIRECTION('',(0.,0.,-1.)); +#247306 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247307 = ORIENTED_EDGE('',*,*,#247308,.T.); +#247308 = EDGE_CURVE('',#247300,#247309,#247311,.T.); +#247309 = VERTEX_POINT('',#247310); +#247310 = CARTESIAN_POINT('',(197.65982,-46.701062,1.585)); +#247311 = LINE('',#247312,#247313); +#247312 = CARTESIAN_POINT('',(197.661042,-46.523763,1.585)); +#247313 = VECTOR('',#247314,1.); +#247314 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247315 = ORIENTED_EDGE('',*,*,#247316,.T.); +#247316 = EDGE_CURVE('',#247309,#247317,#247319,.T.); +#247317 = VERTEX_POINT('',#247318); +#247318 = CARTESIAN_POINT('',(197.411639,-46.945287,1.585)); +#247319 = CIRCLE('',#247320,0.348632345849); +#247320 = AXIS2_PLACEMENT_3D('',#247321,#247322,#247323); +#247321 = CARTESIAN_POINT('',(197.32387019403,-46.6078834593,1.585)); +#247322 = DIRECTION('',(0.,0.,-1.)); +#247323 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247324 = ORIENTED_EDGE('',*,*,#247325,.T.); +#247325 = EDGE_CURVE('',#247317,#247326,#247328,.T.); +#247326 = VERTEX_POINT('',#247327); +#247327 = CARTESIAN_POINT('',(197.398122,-46.946618,1.585)); +#247328 = LINE('',#247329,#247330); +#247329 = CARTESIAN_POINT('',(197.411639,-46.945287,1.585)); +#247330 = VECTOR('',#247331,1.); +#247331 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247332 = ORIENTED_EDGE('',*,*,#247333,.T.); +#247333 = EDGE_CURVE('',#247326,#247334,#247336,.T.); +#247334 = VERTEX_POINT('',#247335); +#247335 = CARTESIAN_POINT('',(197.656136,-47.317723,1.585)); +#247336 = LINE('',#247337,#247338); +#247337 = CARTESIAN_POINT('',(197.398122,-46.946618,1.585)); +#247338 = VECTOR('',#247339,1.); +#247339 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247340 = ORIENTED_EDGE('',*,*,#247341,.T.); +#247341 = EDGE_CURVE('',#247334,#247342,#247344,.T.); +#247342 = VERTEX_POINT('',#247343); +#247343 = CARTESIAN_POINT('',(197.526041,-47.390929,1.585)); +#247344 = CIRCLE('',#247345,7.500005951702E-02); +#247345 = AXIS2_PLACEMENT_3D('',#247346,#247347,#247348); +#247346 = CARTESIAN_POINT('',(197.58748306294,-47.34791874739,1.585)); +#247347 = DIRECTION('',(0.,0.,-1.)); +#247348 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247349 = ORIENTED_EDGE('',*,*,#247350,.T.); +#247350 = EDGE_CURVE('',#247342,#247351,#247353,.T.); +#247351 = VERTEX_POINT('',#247352); +#247352 = CARTESIAN_POINT('',(197.215101,-46.946728,1.585)); +#247353 = LINE('',#247354,#247355); +#247354 = CARTESIAN_POINT('',(197.526041,-47.390929,1.585)); +#247355 = VECTOR('',#247356,1.); +#247356 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247357 = ORIENTED_EDGE('',*,*,#247358,.T.); +#247358 = EDGE_CURVE('',#247351,#247359,#247361,.T.); +#247359 = VERTEX_POINT('',#247360); +#247360 = CARTESIAN_POINT('',(197.091055,-46.946728,1.585)); +#247361 = LINE('',#247362,#247363); +#247362 = CARTESIAN_POINT('',(197.215101,-46.946728,1.585)); +#247363 = VECTOR('',#247364,1.); +#247364 = DIRECTION('',(-1.,0.,0.)); +#247365 = ORIENTED_EDGE('',*,*,#247366,.T.); +#247366 = EDGE_CURVE('',#247359,#247367,#247369,.T.); +#247367 = VERTEX_POINT('',#247368); +#247368 = CARTESIAN_POINT('',(197.089614,-47.362551,1.585)); +#247369 = LINE('',#247370,#247371); +#247370 = CARTESIAN_POINT('',(197.091055,-46.946728,1.585)); +#247371 = VECTOR('',#247372,1.); +#247372 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247373 = ORIENTED_EDGE('',*,*,#247374,.T.); +#247374 = EDGE_CURVE('',#247367,#247375,#247377,.T.); +#247375 = VERTEX_POINT('',#247376); +#247376 = CARTESIAN_POINT('',(196.941055,-47.347919,1.585)); +#247377 = CIRCLE('',#247378,7.500006711464E-02); +#247378 = AXIS2_PLACEMENT_3D('',#247379,#247380,#247381); +#247379 = CARTESIAN_POINT('',(197.01605506711,-47.34791906711,1.585)); +#247380 = DIRECTION('',(-0.,0.,-1.)); +#247381 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247382 = ORIENTED_EDGE('',*,*,#247383,.T.); +#247383 = EDGE_CURVE('',#247375,#247281,#247384,.T.); +#247384 = LINE('',#247385,#247386); +#247385 = CARTESIAN_POINT('',(196.941055,-47.347919,1.585)); +#247386 = VECTOR('',#247387,1.); +#247387 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247388 = FACE_BOUND('',#247389,.F.); +#247389 = EDGE_LOOP('',(#247390,#247401,#247409,#247417,#247425,#247434) + ); +#247390 = ORIENTED_EDGE('',*,*,#247391,.T.); +#247391 = EDGE_CURVE('',#247392,#247394,#247396,.T.); +#247392 = VERTEX_POINT('',#247393); +#247393 = CARTESIAN_POINT('',(197.512483,-46.5561,1.585)); +#247394 = VERTEX_POINT('',#247395); +#247395 = CARTESIAN_POINT('',(197.379302,-46.422919,1.585)); +#247396 = CIRCLE('',#247397,0.18686440374); +#247397 = AXIS2_PLACEMENT_3D('',#247398,#247399,#247400); +#247398 = CARTESIAN_POINT('',(197.331766,-46.603636,1.585)); +#247399 = DIRECTION('',(0.,0.,1.)); +#247400 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247401 = ORIENTED_EDGE('',*,*,#247402,.T.); +#247402 = EDGE_CURVE('',#247394,#247403,#247405,.T.); +#247403 = VERTEX_POINT('',#247404); +#247404 = CARTESIAN_POINT('',(197.091055,-46.422919,1.585)); +#247405 = LINE('',#247406,#247407); +#247406 = CARTESIAN_POINT('',(197.379302,-46.422919,1.585)); +#247407 = VECTOR('',#247408,1.); +#247408 = DIRECTION('',(-1.,0.,0.)); +#247409 = ORIENTED_EDGE('',*,*,#247410,.T.); +#247410 = EDGE_CURVE('',#247403,#247411,#247413,.T.); +#247411 = VERTEX_POINT('',#247412); +#247412 = CARTESIAN_POINT('',(197.091055,-46.796728,1.585)); +#247413 = LINE('',#247414,#247415); +#247414 = CARTESIAN_POINT('',(197.091055,-46.422919,1.585)); +#247415 = VECTOR('',#247416,1.); +#247416 = DIRECTION('',(0.,-1.,0.)); +#247417 = ORIENTED_EDGE('',*,*,#247418,.T.); +#247418 = EDGE_CURVE('',#247411,#247419,#247421,.T.); +#247419 = VERTEX_POINT('',#247420); +#247420 = CARTESIAN_POINT('',(197.379302,-46.796728,1.585)); +#247421 = LINE('',#247422,#247423); +#247422 = CARTESIAN_POINT('',(197.091055,-46.796728,1.585)); +#247423 = VECTOR('',#247424,1.); +#247424 = DIRECTION('',(1.,0.,0.)); +#247425 = ORIENTED_EDGE('',*,*,#247426,.T.); +#247426 = EDGE_CURVE('',#247419,#247427,#247429,.T.); +#247427 = VERTEX_POINT('',#247428); +#247428 = CARTESIAN_POINT('',(197.512483,-46.663547,1.585)); +#247429 = CIRCLE('',#247430,0.18686440374); +#247430 = AXIS2_PLACEMENT_3D('',#247431,#247432,#247433); +#247431 = CARTESIAN_POINT('',(197.331766,-46.616011,1.585)); +#247432 = DIRECTION('',(0.,0.,1.)); +#247433 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247434 = ORIENTED_EDGE('',*,*,#247435,.T.); +#247435 = EDGE_CURVE('',#247427,#247392,#247436,.T.); +#247436 = LINE('',#247437,#247438); +#247437 = CARTESIAN_POINT('',(197.512483,-46.663547,1.585)); +#247438 = VECTOR('',#247439,1.); +#247439 = DIRECTION('',(0.,1.,0.)); +#247440 = PLANE('',#247441); +#247441 = AXIS2_PLACEMENT_3D('',#247442,#247443,#247444); +#247442 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247443 = DIRECTION('',(0.,0.,1.)); +#247444 = DIRECTION('',(1.,0.,-0.)); +#247445 = SHELL_BASED_SURFACE_MODEL('',(#247446)); +#247446 = OPEN_SHELL('',(#247447)); +#247447 = ADVANCED_FACE('',(#247448,#247559),#247611,.T.); +#247448 = FACE_BOUND('',#247449,.F.); +#247449 = EDGE_LOOP('',(#247450,#247461,#247469,#247478,#247486,#247495, + #247503,#247511,#247520,#247528,#247536,#247544,#247553)); +#247450 = ORIENTED_EDGE('',*,*,#247451,.T.); +#247451 = EDGE_CURVE('',#247452,#247454,#247456,.T.); +#247452 = VERTEX_POINT('',#247453); +#247453 = CARTESIAN_POINT('',(200.942496,-46.333287,1.585)); +#247454 = VERTEX_POINT('',#247455); +#247455 = CARTESIAN_POINT('',(201.016055,-46.272919,1.585)); +#247456 = CIRCLE('',#247457,7.500074938986E-02); +#247457 = AXIS2_PLACEMENT_3D('',#247458,#247459,#247460); +#247458 = CARTESIAN_POINT('',(201.01605546611,-46.34791974938,1.585)); +#247459 = DIRECTION('',(0.,0.,-1.)); +#247460 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247461 = ORIENTED_EDGE('',*,*,#247462,.T.); +#247462 = EDGE_CURVE('',#247454,#247463,#247465,.T.); +#247463 = VERTEX_POINT('',#247464); +#247464 = CARTESIAN_POINT('',(201.411639,-46.27436,1.585)); +#247465 = LINE('',#247466,#247467); +#247466 = CARTESIAN_POINT('',(201.016055,-46.272919,1.585)); +#247467 = VECTOR('',#247468,1.); +#247468 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247469 = ORIENTED_EDGE('',*,*,#247470,.T.); +#247470 = EDGE_CURVE('',#247463,#247471,#247473,.T.); +#247471 = VERTEX_POINT('',#247472); +#247472 = CARTESIAN_POINT('',(201.661042,-46.523763,1.585)); +#247473 = CIRCLE('',#247474,0.347870264855); +#247474 = AXIS2_PLACEMENT_3D('',#247475,#247476,#247477); +#247475 = CARTESIAN_POINT('',(201.32431126502,-46.61109073497,1.585)); +#247476 = DIRECTION('',(0.,0.,-1.)); +#247477 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247478 = ORIENTED_EDGE('',*,*,#247479,.T.); +#247479 = EDGE_CURVE('',#247471,#247480,#247482,.T.); +#247480 = VERTEX_POINT('',#247481); +#247481 = CARTESIAN_POINT('',(201.65982,-46.701062,1.585)); +#247482 = LINE('',#247483,#247484); +#247483 = CARTESIAN_POINT('',(201.661042,-46.523763,1.585)); +#247484 = VECTOR('',#247485,1.); +#247485 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247486 = ORIENTED_EDGE('',*,*,#247487,.T.); +#247487 = EDGE_CURVE('',#247480,#247488,#247490,.T.); +#247488 = VERTEX_POINT('',#247489); +#247489 = CARTESIAN_POINT('',(201.411639,-46.945287,1.585)); +#247490 = CIRCLE('',#247491,0.348632345849); +#247491 = AXIS2_PLACEMENT_3D('',#247492,#247493,#247494); +#247492 = CARTESIAN_POINT('',(201.32387019403,-46.6078834593,1.585)); +#247493 = DIRECTION('',(0.,0.,-1.)); +#247494 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247495 = ORIENTED_EDGE('',*,*,#247496,.T.); +#247496 = EDGE_CURVE('',#247488,#247497,#247499,.T.); +#247497 = VERTEX_POINT('',#247498); +#247498 = CARTESIAN_POINT('',(201.398122,-46.946618,1.585)); +#247499 = LINE('',#247500,#247501); +#247500 = CARTESIAN_POINT('',(201.411639,-46.945287,1.585)); +#247501 = VECTOR('',#247502,1.); +#247502 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247503 = ORIENTED_EDGE('',*,*,#247504,.T.); +#247504 = EDGE_CURVE('',#247497,#247505,#247507,.T.); +#247505 = VERTEX_POINT('',#247506); +#247506 = CARTESIAN_POINT('',(201.656136,-47.317723,1.585)); +#247507 = LINE('',#247508,#247509); +#247508 = CARTESIAN_POINT('',(201.398122,-46.946618,1.585)); +#247509 = VECTOR('',#247510,1.); +#247510 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247511 = ORIENTED_EDGE('',*,*,#247512,.T.); +#247512 = EDGE_CURVE('',#247505,#247513,#247515,.T.); +#247513 = VERTEX_POINT('',#247514); +#247514 = CARTESIAN_POINT('',(201.526041,-47.390929,1.585)); +#247515 = CIRCLE('',#247516,7.500005951702E-02); +#247516 = AXIS2_PLACEMENT_3D('',#247517,#247518,#247519); +#247517 = CARTESIAN_POINT('',(201.58748306294,-47.34791874739,1.585)); +#247518 = DIRECTION('',(0.,0.,-1.)); +#247519 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247520 = ORIENTED_EDGE('',*,*,#247521,.T.); +#247521 = EDGE_CURVE('',#247513,#247522,#247524,.T.); +#247522 = VERTEX_POINT('',#247523); +#247523 = CARTESIAN_POINT('',(201.215101,-46.946728,1.585)); +#247524 = LINE('',#247525,#247526); +#247525 = CARTESIAN_POINT('',(201.526041,-47.390929,1.585)); +#247526 = VECTOR('',#247527,1.); +#247527 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247528 = ORIENTED_EDGE('',*,*,#247529,.T.); +#247529 = EDGE_CURVE('',#247522,#247530,#247532,.T.); +#247530 = VERTEX_POINT('',#247531); +#247531 = CARTESIAN_POINT('',(201.091055,-46.946728,1.585)); +#247532 = LINE('',#247533,#247534); +#247533 = CARTESIAN_POINT('',(201.215101,-46.946728,1.585)); +#247534 = VECTOR('',#247535,1.); +#247535 = DIRECTION('',(-1.,0.,0.)); +#247536 = ORIENTED_EDGE('',*,*,#247537,.T.); +#247537 = EDGE_CURVE('',#247530,#247538,#247540,.T.); +#247538 = VERTEX_POINT('',#247539); +#247539 = CARTESIAN_POINT('',(201.089614,-47.362551,1.585)); +#247540 = LINE('',#247541,#247542); +#247541 = CARTESIAN_POINT('',(201.091055,-46.946728,1.585)); +#247542 = VECTOR('',#247543,1.); +#247543 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247544 = ORIENTED_EDGE('',*,*,#247545,.T.); +#247545 = EDGE_CURVE('',#247538,#247546,#247548,.T.); +#247546 = VERTEX_POINT('',#247547); +#247547 = CARTESIAN_POINT('',(200.941055,-47.347919,1.585)); +#247548 = CIRCLE('',#247549,7.500006711464E-02); +#247549 = AXIS2_PLACEMENT_3D('',#247550,#247551,#247552); +#247550 = CARTESIAN_POINT('',(201.01605506711,-47.34791906711,1.585)); +#247551 = DIRECTION('',(-0.,0.,-1.)); +#247552 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247553 = ORIENTED_EDGE('',*,*,#247554,.T.); +#247554 = EDGE_CURVE('',#247546,#247452,#247555,.T.); +#247555 = LINE('',#247556,#247557); +#247556 = CARTESIAN_POINT('',(200.941055,-47.347919,1.585)); +#247557 = VECTOR('',#247558,1.); +#247558 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247559 = FACE_BOUND('',#247560,.F.); +#247560 = EDGE_LOOP('',(#247561,#247572,#247580,#247588,#247596,#247605) + ); +#247561 = ORIENTED_EDGE('',*,*,#247562,.T.); +#247562 = EDGE_CURVE('',#247563,#247565,#247567,.T.); +#247563 = VERTEX_POINT('',#247564); +#247564 = CARTESIAN_POINT('',(201.512483,-46.5561,1.585)); +#247565 = VERTEX_POINT('',#247566); +#247566 = CARTESIAN_POINT('',(201.379302,-46.422919,1.585)); +#247567 = CIRCLE('',#247568,0.18686440374); +#247568 = AXIS2_PLACEMENT_3D('',#247569,#247570,#247571); +#247569 = CARTESIAN_POINT('',(201.331766,-46.603636,1.585)); +#247570 = DIRECTION('',(0.,0.,1.)); +#247571 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247572 = ORIENTED_EDGE('',*,*,#247573,.T.); +#247573 = EDGE_CURVE('',#247565,#247574,#247576,.T.); +#247574 = VERTEX_POINT('',#247575); +#247575 = CARTESIAN_POINT('',(201.091055,-46.422919,1.585)); +#247576 = LINE('',#247577,#247578); +#247577 = CARTESIAN_POINT('',(201.379302,-46.422919,1.585)); +#247578 = VECTOR('',#247579,1.); +#247579 = DIRECTION('',(-1.,0.,0.)); +#247580 = ORIENTED_EDGE('',*,*,#247581,.T.); +#247581 = EDGE_CURVE('',#247574,#247582,#247584,.T.); +#247582 = VERTEX_POINT('',#247583); +#247583 = CARTESIAN_POINT('',(201.091055,-46.796728,1.585)); +#247584 = LINE('',#247585,#247586); +#247585 = CARTESIAN_POINT('',(201.091055,-46.422919,1.585)); +#247586 = VECTOR('',#247587,1.); +#247587 = DIRECTION('',(0.,-1.,0.)); +#247588 = ORIENTED_EDGE('',*,*,#247589,.T.); +#247589 = EDGE_CURVE('',#247582,#247590,#247592,.T.); +#247590 = VERTEX_POINT('',#247591); +#247591 = CARTESIAN_POINT('',(201.379302,-46.796728,1.585)); +#247592 = LINE('',#247593,#247594); +#247593 = CARTESIAN_POINT('',(201.091055,-46.796728,1.585)); +#247594 = VECTOR('',#247595,1.); +#247595 = DIRECTION('',(1.,0.,0.)); +#247596 = ORIENTED_EDGE('',*,*,#247597,.T.); +#247597 = EDGE_CURVE('',#247590,#247598,#247600,.T.); +#247598 = VERTEX_POINT('',#247599); +#247599 = CARTESIAN_POINT('',(201.512483,-46.663547,1.585)); +#247600 = CIRCLE('',#247601,0.18686440374); +#247601 = AXIS2_PLACEMENT_3D('',#247602,#247603,#247604); +#247602 = CARTESIAN_POINT('',(201.331766,-46.616011,1.585)); +#247603 = DIRECTION('',(0.,0.,1.)); +#247604 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247605 = ORIENTED_EDGE('',*,*,#247606,.T.); +#247606 = EDGE_CURVE('',#247598,#247563,#247607,.T.); +#247607 = LINE('',#247608,#247609); +#247608 = CARTESIAN_POINT('',(201.512483,-46.663547,1.585)); +#247609 = VECTOR('',#247610,1.); +#247610 = DIRECTION('',(0.,1.,0.)); +#247611 = PLANE('',#247612); +#247612 = AXIS2_PLACEMENT_3D('',#247613,#247614,#247615); +#247613 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247614 = DIRECTION('',(0.,0.,1.)); +#247615 = DIRECTION('',(1.,0.,-0.)); +#247616 = SHELL_BASED_SURFACE_MODEL('',(#247617)); +#247617 = OPEN_SHELL('',(#247618)); +#247618 = ADVANCED_FACE('',(#247619,#247730),#247782,.T.); +#247619 = FACE_BOUND('',#247620,.F.); +#247620 = EDGE_LOOP('',(#247621,#247632,#247640,#247649,#247657,#247666, + #247674,#247682,#247691,#247699,#247707,#247715,#247724)); +#247621 = ORIENTED_EDGE('',*,*,#247622,.T.); +#247622 = EDGE_CURVE('',#247623,#247625,#247627,.T.); +#247623 = VERTEX_POINT('',#247624); +#247624 = CARTESIAN_POINT('',(204.942496,-46.333287,1.585)); +#247625 = VERTEX_POINT('',#247626); +#247626 = CARTESIAN_POINT('',(205.016055,-46.272919,1.585)); +#247627 = CIRCLE('',#247628,7.500074938986E-02); +#247628 = AXIS2_PLACEMENT_3D('',#247629,#247630,#247631); +#247629 = CARTESIAN_POINT('',(205.01605546611,-46.34791974938,1.585)); +#247630 = DIRECTION('',(0.,0.,-1.)); +#247631 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247632 = ORIENTED_EDGE('',*,*,#247633,.T.); +#247633 = EDGE_CURVE('',#247625,#247634,#247636,.T.); +#247634 = VERTEX_POINT('',#247635); +#247635 = CARTESIAN_POINT('',(205.411639,-46.27436,1.585)); +#247636 = LINE('',#247637,#247638); +#247637 = CARTESIAN_POINT('',(205.016055,-46.272919,1.585)); +#247638 = VECTOR('',#247639,1.); +#247639 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#247640 = ORIENTED_EDGE('',*,*,#247641,.T.); +#247641 = EDGE_CURVE('',#247634,#247642,#247644,.T.); +#247642 = VERTEX_POINT('',#247643); +#247643 = CARTESIAN_POINT('',(205.661042,-46.523763,1.585)); +#247644 = CIRCLE('',#247645,0.347870264855); +#247645 = AXIS2_PLACEMENT_3D('',#247646,#247647,#247648); +#247646 = CARTESIAN_POINT('',(205.32431126502,-46.61109073497,1.585)); +#247647 = DIRECTION('',(0.,0.,-1.)); +#247648 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247649 = ORIENTED_EDGE('',*,*,#247650,.T.); +#247650 = EDGE_CURVE('',#247642,#247651,#247653,.T.); +#247651 = VERTEX_POINT('',#247652); +#247652 = CARTESIAN_POINT('',(205.65982,-46.701062,1.585)); +#247653 = LINE('',#247654,#247655); +#247654 = CARTESIAN_POINT('',(205.661042,-46.523763,1.585)); +#247655 = VECTOR('',#247656,1.); +#247656 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#247657 = ORIENTED_EDGE('',*,*,#247658,.T.); +#247658 = EDGE_CURVE('',#247651,#247659,#247661,.T.); +#247659 = VERTEX_POINT('',#247660); +#247660 = CARTESIAN_POINT('',(205.411639,-46.945287,1.585)); +#247661 = CIRCLE('',#247662,0.348632345849); +#247662 = AXIS2_PLACEMENT_3D('',#247663,#247664,#247665); +#247663 = CARTESIAN_POINT('',(205.32387019403,-46.6078834593,1.585)); +#247664 = DIRECTION('',(0.,0.,-1.)); +#247665 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#247666 = ORIENTED_EDGE('',*,*,#247667,.T.); +#247667 = EDGE_CURVE('',#247659,#247668,#247670,.T.); +#247668 = VERTEX_POINT('',#247669); +#247669 = CARTESIAN_POINT('',(205.398122,-46.946618,1.585)); +#247670 = LINE('',#247671,#247672); +#247671 = CARTESIAN_POINT('',(205.411639,-46.945287,1.585)); +#247672 = VECTOR('',#247673,1.); +#247673 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#247674 = ORIENTED_EDGE('',*,*,#247675,.T.); +#247675 = EDGE_CURVE('',#247668,#247676,#247678,.T.); +#247676 = VERTEX_POINT('',#247677); +#247677 = CARTESIAN_POINT('',(205.656136,-47.317723,1.585)); +#247678 = LINE('',#247679,#247680); +#247679 = CARTESIAN_POINT('',(205.398122,-46.946618,1.585)); +#247680 = VECTOR('',#247681,1.); +#247681 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#247682 = ORIENTED_EDGE('',*,*,#247683,.T.); +#247683 = EDGE_CURVE('',#247676,#247684,#247686,.T.); +#247684 = VERTEX_POINT('',#247685); +#247685 = CARTESIAN_POINT('',(205.526041,-47.390929,1.585)); +#247686 = CIRCLE('',#247687,7.500005951702E-02); +#247687 = AXIS2_PLACEMENT_3D('',#247688,#247689,#247690); +#247688 = CARTESIAN_POINT('',(205.58748306294,-47.34791874739,1.585)); +#247689 = DIRECTION('',(0.,0.,-1.)); +#247690 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#247691 = ORIENTED_EDGE('',*,*,#247692,.T.); +#247692 = EDGE_CURVE('',#247684,#247693,#247695,.T.); +#247693 = VERTEX_POINT('',#247694); +#247694 = CARTESIAN_POINT('',(205.215101,-46.946728,1.585)); +#247695 = LINE('',#247696,#247697); +#247696 = CARTESIAN_POINT('',(205.526041,-47.390929,1.585)); +#247697 = VECTOR('',#247698,1.); +#247698 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#247699 = ORIENTED_EDGE('',*,*,#247700,.T.); +#247700 = EDGE_CURVE('',#247693,#247701,#247703,.T.); +#247701 = VERTEX_POINT('',#247702); +#247702 = CARTESIAN_POINT('',(205.091055,-46.946728,1.585)); +#247703 = LINE('',#247704,#247705); +#247704 = CARTESIAN_POINT('',(205.215101,-46.946728,1.585)); +#247705 = VECTOR('',#247706,1.); +#247706 = DIRECTION('',(-1.,0.,0.)); +#247707 = ORIENTED_EDGE('',*,*,#247708,.T.); +#247708 = EDGE_CURVE('',#247701,#247709,#247711,.T.); +#247709 = VERTEX_POINT('',#247710); +#247710 = CARTESIAN_POINT('',(205.089614,-47.362551,1.585)); +#247711 = LINE('',#247712,#247713); +#247712 = CARTESIAN_POINT('',(205.091055,-46.946728,1.585)); +#247713 = VECTOR('',#247714,1.); +#247714 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#247715 = ORIENTED_EDGE('',*,*,#247716,.T.); +#247716 = EDGE_CURVE('',#247709,#247717,#247719,.T.); +#247717 = VERTEX_POINT('',#247718); +#247718 = CARTESIAN_POINT('',(204.941055,-47.347919,1.585)); +#247719 = CIRCLE('',#247720,7.500006711464E-02); +#247720 = AXIS2_PLACEMENT_3D('',#247721,#247722,#247723); +#247721 = CARTESIAN_POINT('',(205.01605506711,-47.34791906711,1.585)); +#247722 = DIRECTION('',(-0.,0.,-1.)); +#247723 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#247724 = ORIENTED_EDGE('',*,*,#247725,.T.); +#247725 = EDGE_CURVE('',#247717,#247623,#247726,.T.); +#247726 = LINE('',#247727,#247728); +#247727 = CARTESIAN_POINT('',(204.941055,-47.347919,1.585)); +#247728 = VECTOR('',#247729,1.); +#247729 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247730 = FACE_BOUND('',#247731,.F.); +#247731 = EDGE_LOOP('',(#247732,#247743,#247751,#247759,#247767,#247776) + ); +#247732 = ORIENTED_EDGE('',*,*,#247733,.T.); +#247733 = EDGE_CURVE('',#247734,#247736,#247738,.T.); +#247734 = VERTEX_POINT('',#247735); +#247735 = CARTESIAN_POINT('',(205.512483,-46.5561,1.585)); +#247736 = VERTEX_POINT('',#247737); +#247737 = CARTESIAN_POINT('',(205.379302,-46.422919,1.585)); +#247738 = CIRCLE('',#247739,0.18686440374); +#247739 = AXIS2_PLACEMENT_3D('',#247740,#247741,#247742); +#247740 = CARTESIAN_POINT('',(205.331766,-46.603636,1.585)); +#247741 = DIRECTION('',(0.,0.,1.)); +#247742 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247743 = ORIENTED_EDGE('',*,*,#247744,.T.); +#247744 = EDGE_CURVE('',#247736,#247745,#247747,.T.); +#247745 = VERTEX_POINT('',#247746); +#247746 = CARTESIAN_POINT('',(205.091055,-46.422919,1.585)); +#247747 = LINE('',#247748,#247749); +#247748 = CARTESIAN_POINT('',(205.379302,-46.422919,1.585)); +#247749 = VECTOR('',#247750,1.); +#247750 = DIRECTION('',(-1.,0.,0.)); +#247751 = ORIENTED_EDGE('',*,*,#247752,.T.); +#247752 = EDGE_CURVE('',#247745,#247753,#247755,.T.); +#247753 = VERTEX_POINT('',#247754); +#247754 = CARTESIAN_POINT('',(205.091055,-46.796728,1.585)); +#247755 = LINE('',#247756,#247757); +#247756 = CARTESIAN_POINT('',(205.091055,-46.422919,1.585)); +#247757 = VECTOR('',#247758,1.); +#247758 = DIRECTION('',(0.,-1.,0.)); +#247759 = ORIENTED_EDGE('',*,*,#247760,.T.); +#247760 = EDGE_CURVE('',#247753,#247761,#247763,.T.); +#247761 = VERTEX_POINT('',#247762); +#247762 = CARTESIAN_POINT('',(205.379302,-46.796728,1.585)); +#247763 = LINE('',#247764,#247765); +#247764 = CARTESIAN_POINT('',(205.091055,-46.796728,1.585)); +#247765 = VECTOR('',#247766,1.); +#247766 = DIRECTION('',(1.,0.,0.)); +#247767 = ORIENTED_EDGE('',*,*,#247768,.T.); +#247768 = EDGE_CURVE('',#247761,#247769,#247771,.T.); +#247769 = VERTEX_POINT('',#247770); +#247770 = CARTESIAN_POINT('',(205.512483,-46.663547,1.585)); +#247771 = CIRCLE('',#247772,0.18686440374); +#247772 = AXIS2_PLACEMENT_3D('',#247773,#247774,#247775); +#247773 = CARTESIAN_POINT('',(205.331766,-46.616011,1.585)); +#247774 = DIRECTION('',(0.,0.,1.)); +#247775 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#247776 = ORIENTED_EDGE('',*,*,#247777,.T.); +#247777 = EDGE_CURVE('',#247769,#247734,#247778,.T.); +#247778 = LINE('',#247779,#247780); +#247779 = CARTESIAN_POINT('',(205.512483,-46.663547,1.585)); +#247780 = VECTOR('',#247781,1.); +#247781 = DIRECTION('',(0.,1.,0.)); +#247782 = PLANE('',#247783); +#247783 = AXIS2_PLACEMENT_3D('',#247784,#247785,#247786); +#247784 = CARTESIAN_POINT('',(0.,0.,1.585)); +#247785 = DIRECTION('',(0.,0.,1.)); +#247786 = DIRECTION('',(1.,0.,-0.)); +#247787 = SHELL_BASED_SURFACE_MODEL('',(#247788)); +#247788 = OPEN_SHELL('',(#247789)); +#247789 = ADVANCED_FACE('',(#247790,#247908,#247975),#248027,.T.); +#247790 = FACE_BOUND('',#247791,.F.); +#247791 = EDGE_LOOP('',(#247792,#247803,#247811,#247820,#247828,#247836, + #247844,#247852,#247860,#247869,#247877,#247886,#247894,#247902)); +#247792 = ORIENTED_EDGE('',*,*,#247793,.T.); +#247793 = EDGE_CURVE('',#247794,#247796,#247798,.T.); +#247794 = VERTEX_POINT('',#247795); +#247795 = CARTESIAN_POINT('',(193.942496,-46.333287,1.585)); +#247796 = VERTEX_POINT('',#247797); +#247797 = CARTESIAN_POINT('',(194.016055,-46.272919,1.585)); +#247798 = CIRCLE('',#247799,7.500074938986E-02); +#247799 = AXIS2_PLACEMENT_3D('',#247800,#247801,#247802); +#247800 = CARTESIAN_POINT('',(194.01605546611,-46.34791974938,1.585)); +#247801 = DIRECTION('',(0.,0.,-1.)); +#247802 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#247803 = ORIENTED_EDGE('',*,*,#247804,.T.); +#247804 = EDGE_CURVE('',#247796,#247805,#247807,.T.); +#247805 = VERTEX_POINT('',#247806); +#247806 = CARTESIAN_POINT('',(194.36402,-46.27436,1.585)); +#247807 = LINE('',#247808,#247809); +#247808 = CARTESIAN_POINT('',(194.016055,-46.272919,1.585)); +#247809 = VECTOR('',#247810,1.); +#247810 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#247811 = ORIENTED_EDGE('',*,*,#247812,.T.); +#247812 = EDGE_CURVE('',#247805,#247813,#247815,.T.); +#247813 = VERTEX_POINT('',#247814); +#247814 = CARTESIAN_POINT('',(194.613423,-46.523763,1.585)); +#247815 = CIRCLE('',#247816,0.347870264855); +#247816 = AXIS2_PLACEMENT_3D('',#247817,#247818,#247819); +#247817 = CARTESIAN_POINT('',(194.27669226502,-46.61109073497,1.585)); +#247818 = DIRECTION('',(0.,0.,-1.)); +#247819 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#247820 = ORIENTED_EDGE('',*,*,#247821,.T.); +#247821 = EDGE_CURVE('',#247813,#247822,#247824,.T.); +#247822 = VERTEX_POINT('',#247823); +#247823 = CARTESIAN_POINT('',(194.612201,-46.653443,1.585)); +#247824 = LINE('',#247825,#247826); +#247825 = CARTESIAN_POINT('',(194.613423,-46.523763,1.585)); +#247826 = VECTOR('',#247827,1.); +#247827 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#247828 = ORIENTED_EDGE('',*,*,#247829,.T.); +#247829 = EDGE_CURVE('',#247822,#247830,#247832,.T.); +#247830 = VERTEX_POINT('',#247831); +#247831 = CARTESIAN_POINT('',(194.549996,-46.776154,1.585)); +#247832 = LINE('',#247833,#247834); +#247833 = CARTESIAN_POINT('',(194.612201,-46.653443,1.585)); +#247834 = VECTOR('',#247835,1.); +#247835 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#247836 = ORIENTED_EDGE('',*,*,#247837,.T.); +#247837 = EDGE_CURVE('',#247830,#247838,#247840,.T.); +#247838 = VERTEX_POINT('',#247839); +#247839 = CARTESIAN_POINT('',(194.523319,-46.803862,1.585)); +#247840 = LINE('',#247841,#247842); +#247841 = CARTESIAN_POINT('',(194.549996,-46.776154,1.585)); +#247842 = VECTOR('',#247843,1.); +#247843 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#247844 = ORIENTED_EDGE('',*,*,#247845,.T.); +#247845 = EDGE_CURVE('',#247838,#247846,#247848,.T.); +#247846 = VERTEX_POINT('',#247847); +#247847 = CARTESIAN_POINT('',(194.545278,-46.818695,1.585)); +#247848 = LINE('',#247849,#247850); +#247849 = CARTESIAN_POINT('',(194.523319,-46.803862,1.585)); +#247850 = VECTOR('',#247851,1.); +#247851 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#247852 = ORIENTED_EDGE('',*,*,#247853,.T.); +#247853 = EDGE_CURVE('',#247846,#247854,#247856,.T.); +#247854 = VERTEX_POINT('',#247855); +#247855 = CARTESIAN_POINT('',(194.606946,-46.885806,1.585)); +#247856 = LINE('',#247857,#247858); +#247857 = CARTESIAN_POINT('',(194.545278,-46.818695,1.585)); +#247858 = VECTOR('',#247859,1.); +#247859 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#247860 = ORIENTED_EDGE('',*,*,#247861,.T.); +#247861 = EDGE_CURVE('',#247854,#247862,#247864,.T.); +#247862 = VERTEX_POINT('',#247863); +#247863 = CARTESIAN_POINT('',(194.597615,-47.299963,1.585)); +#247864 = CIRCLE('',#247865,0.341850333486); +#247865 = AXIS2_PLACEMENT_3D('',#247866,#247867,#247868); +#247866 = CARTESIAN_POINT('',(194.33039659864,-47.08675892761,1.585)); +#247867 = DIRECTION('',(0.,0.,-1.)); +#247868 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#247869 = ORIENTED_EDGE('',*,*,#247870,.T.); +#247870 = EDGE_CURVE('',#247862,#247871,#247873,.T.); +#247871 = VERTEX_POINT('',#247872); +#247872 = CARTESIAN_POINT('',(194.532085,-47.363417,1.585)); +#247873 = LINE('',#247874,#247875); +#247874 = CARTESIAN_POINT('',(194.597615,-47.299963,1.585)); +#247875 = VECTOR('',#247876,1.); +#247876 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#247877 = ORIENTED_EDGE('',*,*,#247878,.T.); +#247878 = EDGE_CURVE('',#247871,#247879,#247881,.T.); +#247879 = VERTEX_POINT('',#247880); +#247880 = CARTESIAN_POINT('',(193.974387,-47.410279,1.585)); +#247881 = CIRCLE('',#247882,0.612118292739); +#247882 = AXIS2_PLACEMENT_3D('',#247883,#247884,#247885); +#247883 = CARTESIAN_POINT('',(194.20765114383,-46.84434910725,1.585)); +#247884 = DIRECTION('',(-0.,0.,-1.)); +#247885 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#247886 = ORIENTED_EDGE('',*,*,#247887,.T.); +#247887 = EDGE_CURVE('',#247879,#247888,#247890,.T.); +#247888 = VERTEX_POINT('',#247889); +#247889 = CARTESIAN_POINT('',(193.953695,-47.389587,1.585)); +#247890 = LINE('',#247891,#247892); +#247891 = CARTESIAN_POINT('',(193.974387,-47.410279,1.585)); +#247892 = VECTOR('',#247893,1.); +#247893 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#247894 = ORIENTED_EDGE('',*,*,#247895,.T.); +#247895 = EDGE_CURVE('',#247888,#247896,#247898,.T.); +#247896 = VERTEX_POINT('',#247897); +#247897 = CARTESIAN_POINT('',(193.941055,-47.347919,1.585)); +#247898 = LINE('',#247899,#247900); +#247899 = CARTESIAN_POINT('',(193.953695,-47.389587,1.585)); +#247900 = VECTOR('',#247901,1.); +#247901 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#247902 = ORIENTED_EDGE('',*,*,#247903,.T.); +#247903 = EDGE_CURVE('',#247896,#247794,#247904,.T.); +#247904 = LINE('',#247905,#247906); +#247905 = CARTESIAN_POINT('',(193.941055,-47.347919,1.585)); +#247906 = VECTOR('',#247907,1.); +#247907 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#247908 = FACE_BOUND('',#247909,.F.); +#247909 = EDGE_LOOP('',(#247910,#247920,#247928,#247936,#247944,#247953, + #247961,#247969)); +#247910 = ORIENTED_EDGE('',*,*,#247911,.T.); +#247911 = EDGE_CURVE('',#247912,#247914,#247916,.T.); +#247912 = VERTEX_POINT('',#247913); +#247913 = CARTESIAN_POINT('',(194.451731,-46.93728,1.585)); +#247914 = VERTEX_POINT('',#247915); +#247915 = CARTESIAN_POINT('',(194.337218,-46.899109,1.585)); +#247916 = LINE('',#247917,#247918); +#247917 = CARTESIAN_POINT('',(194.451731,-46.93728,1.585)); +#247918 = VECTOR('',#247919,1.); +#247919 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#247920 = ORIENTED_EDGE('',*,*,#247921,.T.); +#247921 = EDGE_CURVE('',#247914,#247922,#247924,.T.); +#247922 = VERTEX_POINT('',#247923); +#247923 = CARTESIAN_POINT('',(194.091055,-46.899109,1.585)); +#247924 = LINE('',#247925,#247926); +#247925 = CARTESIAN_POINT('',(194.337218,-46.899109,1.585)); +#247926 = VECTOR('',#247927,1.); +#247927 = DIRECTION('',(-1.,0.,0.)); +#247928 = ORIENTED_EDGE('',*,*,#247929,.T.); +#247929 = EDGE_CURVE('',#247922,#247930,#247932,.T.); +#247930 = VERTEX_POINT('',#247931); +#247931 = CARTESIAN_POINT('',(194.091055,-47.272919,1.585)); +#247932 = LINE('',#247933,#247934); +#247933 = CARTESIAN_POINT('',(194.091055,-46.899109,1.585)); +#247934 = VECTOR('',#247935,1.); +#247935 = DIRECTION('',(0.,-1.,0.)); +#247936 = ORIENTED_EDGE('',*,*,#247937,.T.); +#247937 = EDGE_CURVE('',#247930,#247938,#247940,.T.); +#247938 = VERTEX_POINT('',#247939); +#247939 = CARTESIAN_POINT('',(194.379302,-47.272919,1.585)); +#247940 = LINE('',#247941,#247942); +#247941 = CARTESIAN_POINT('',(194.091055,-47.272919,1.585)); +#247942 = VECTOR('',#247943,1.); +#247943 = DIRECTION('',(1.,0.,0.)); +#247944 = ORIENTED_EDGE('',*,*,#247945,.T.); +#247945 = EDGE_CURVE('',#247938,#247946,#247948,.T.); +#247946 = VERTEX_POINT('',#247947); +#247947 = CARTESIAN_POINT('',(194.512483,-47.139737,1.585)); +#247948 = CIRCLE('',#247949,0.186867760544); +#247949 = AXIS2_PLACEMENT_3D('',#247950,#247951,#247952); +#247950 = CARTESIAN_POINT('',(194.33176296928,-47.09219932622,1.585)); +#247951 = DIRECTION('',(0.,0.,1.)); +#247952 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#247953 = ORIENTED_EDGE('',*,*,#247954,.T.); +#247954 = EDGE_CURVE('',#247946,#247955,#247957,.T.); +#247955 = VERTEX_POINT('',#247956); +#247956 = CARTESIAN_POINT('',(194.512483,-47.03229,1.585)); +#247957 = LINE('',#247958,#247959); +#247958 = CARTESIAN_POINT('',(194.512483,-47.139737,1.585)); +#247959 = VECTOR('',#247960,1.); +#247960 = DIRECTION('',(0.,1.,0.)); +#247961 = ORIENTED_EDGE('',*,*,#247962,.T.); +#247962 = EDGE_CURVE('',#247955,#247963,#247965,.T.); +#247963 = VERTEX_POINT('',#247964); +#247964 = CARTESIAN_POINT('',(194.478225,-46.963774,1.585)); +#247965 = LINE('',#247966,#247967); +#247966 = CARTESIAN_POINT('',(194.512483,-47.03229,1.585)); +#247967 = VECTOR('',#247968,1.); +#247968 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#247969 = ORIENTED_EDGE('',*,*,#247970,.T.); +#247970 = EDGE_CURVE('',#247963,#247912,#247971,.T.); +#247971 = LINE('',#247972,#247973); +#247972 = CARTESIAN_POINT('',(194.478225,-46.963774,1.585)); +#247973 = VECTOR('',#247974,1.); +#247974 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#247975 = FACE_BOUND('',#247976,.F.); +#247976 = EDGE_LOOP('',(#247977,#247988,#247996,#248004,#248012,#248021) + ); +#247977 = ORIENTED_EDGE('',*,*,#247978,.T.); +#247978 = EDGE_CURVE('',#247979,#247981,#247983,.T.); +#247979 = VERTEX_POINT('',#247980); +#247980 = CARTESIAN_POINT('',(194.464864,-46.5561,1.585)); +#247981 = VERTEX_POINT('',#247982); +#247982 = CARTESIAN_POINT('',(194.331683,-46.422919,1.585)); +#247983 = CIRCLE('',#247984,0.18686440374); +#247984 = AXIS2_PLACEMENT_3D('',#247985,#247986,#247987); +#247985 = CARTESIAN_POINT('',(194.284147,-46.603636,1.585)); +#247986 = DIRECTION('',(0.,0.,1.)); +#247987 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#247988 = ORIENTED_EDGE('',*,*,#247989,.T.); +#247989 = EDGE_CURVE('',#247981,#247990,#247992,.T.); +#247990 = VERTEX_POINT('',#247991); +#247991 = CARTESIAN_POINT('',(194.091055,-46.422919,1.585)); +#247992 = LINE('',#247993,#247994); +#247993 = CARTESIAN_POINT('',(194.331683,-46.422919,1.585)); +#247994 = VECTOR('',#247995,1.); +#247995 = DIRECTION('',(-1.,0.,0.)); +#247996 = ORIENTED_EDGE('',*,*,#247997,.T.); +#247997 = EDGE_CURVE('',#247990,#247998,#248000,.T.); +#247998 = VERTEX_POINT('',#247999); +#247999 = CARTESIAN_POINT('',(194.091055,-46.749109,1.585)); +#248000 = LINE('',#248001,#248002); +#248001 = CARTESIAN_POINT('',(194.091055,-46.422919,1.585)); +#248002 = VECTOR('',#248003,1.); +#248003 = DIRECTION('',(0.,-1.,0.)); +#248004 = ORIENTED_EDGE('',*,*,#248005,.T.); +#248005 = EDGE_CURVE('',#247998,#248006,#248008,.T.); +#248006 = VERTEX_POINT('',#248007); +#248007 = CARTESIAN_POINT('',(194.331683,-46.749109,1.585)); +#248008 = LINE('',#248009,#248010); +#248009 = CARTESIAN_POINT('',(194.091055,-46.749109,1.585)); +#248010 = VECTOR('',#248011,1.); +#248011 = DIRECTION('',(1.,0.,0.)); +#248012 = ORIENTED_EDGE('',*,*,#248013,.T.); +#248013 = EDGE_CURVE('',#248006,#248014,#248016,.T.); +#248014 = VERTEX_POINT('',#248015); +#248015 = CARTESIAN_POINT('',(194.464864,-46.615928,1.585)); +#248016 = CIRCLE('',#248017,0.18686440374); +#248017 = AXIS2_PLACEMENT_3D('',#248018,#248019,#248020); +#248018 = CARTESIAN_POINT('',(194.284147,-46.568392,1.585)); +#248019 = DIRECTION('',(0.,0.,1.)); +#248020 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248021 = ORIENTED_EDGE('',*,*,#248022,.T.); +#248022 = EDGE_CURVE('',#248014,#247979,#248023,.T.); +#248023 = LINE('',#248024,#248025); +#248024 = CARTESIAN_POINT('',(194.464864,-46.615928,1.585)); +#248025 = VECTOR('',#248026,1.); +#248026 = DIRECTION('',(0.,1.,0.)); +#248027 = PLANE('',#248028); +#248028 = AXIS2_PLACEMENT_3D('',#248029,#248030,#248031); +#248029 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248030 = DIRECTION('',(0.,0.,1.)); +#248031 = DIRECTION('',(1.,0.,-0.)); +#248032 = SHELL_BASED_SURFACE_MODEL('',(#248033)); +#248033 = OPEN_SHELL('',(#248034)); +#248034 = ADVANCED_FACE('',(#248035,#248153,#248220),#248272,.T.); +#248035 = FACE_BOUND('',#248036,.F.); +#248036 = EDGE_LOOP('',(#248037,#248048,#248056,#248065,#248073,#248081, + #248089,#248097,#248105,#248114,#248122,#248131,#248139,#248147)); +#248037 = ORIENTED_EDGE('',*,*,#248038,.T.); +#248038 = EDGE_CURVE('',#248039,#248041,#248043,.T.); +#248039 = VERTEX_POINT('',#248040); +#248040 = CARTESIAN_POINT('',(197.942496,-46.333287,1.585)); +#248041 = VERTEX_POINT('',#248042); +#248042 = CARTESIAN_POINT('',(198.016055,-46.272919,1.585)); +#248043 = CIRCLE('',#248044,7.500074938986E-02); +#248044 = AXIS2_PLACEMENT_3D('',#248045,#248046,#248047); +#248045 = CARTESIAN_POINT('',(198.01605546611,-46.34791974938,1.585)); +#248046 = DIRECTION('',(0.,0.,-1.)); +#248047 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#248048 = ORIENTED_EDGE('',*,*,#248049,.T.); +#248049 = EDGE_CURVE('',#248041,#248050,#248052,.T.); +#248050 = VERTEX_POINT('',#248051); +#248051 = CARTESIAN_POINT('',(198.36402,-46.27436,1.585)); +#248052 = LINE('',#248053,#248054); +#248053 = CARTESIAN_POINT('',(198.016055,-46.272919,1.585)); +#248054 = VECTOR('',#248055,1.); +#248055 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#248056 = ORIENTED_EDGE('',*,*,#248057,.T.); +#248057 = EDGE_CURVE('',#248050,#248058,#248060,.T.); +#248058 = VERTEX_POINT('',#248059); +#248059 = CARTESIAN_POINT('',(198.613423,-46.523763,1.585)); +#248060 = CIRCLE('',#248061,0.347870264855); +#248061 = AXIS2_PLACEMENT_3D('',#248062,#248063,#248064); +#248062 = CARTESIAN_POINT('',(198.27669226502,-46.61109073497,1.585)); +#248063 = DIRECTION('',(0.,0.,-1.)); +#248064 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#248065 = ORIENTED_EDGE('',*,*,#248066,.T.); +#248066 = EDGE_CURVE('',#248058,#248067,#248069,.T.); +#248067 = VERTEX_POINT('',#248068); +#248068 = CARTESIAN_POINT('',(198.612201,-46.653443,1.585)); +#248069 = LINE('',#248070,#248071); +#248070 = CARTESIAN_POINT('',(198.613423,-46.523763,1.585)); +#248071 = VECTOR('',#248072,1.); +#248072 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#248073 = ORIENTED_EDGE('',*,*,#248074,.T.); +#248074 = EDGE_CURVE('',#248067,#248075,#248077,.T.); +#248075 = VERTEX_POINT('',#248076); +#248076 = CARTESIAN_POINT('',(198.549996,-46.776154,1.585)); +#248077 = LINE('',#248078,#248079); +#248078 = CARTESIAN_POINT('',(198.612201,-46.653443,1.585)); +#248079 = VECTOR('',#248080,1.); +#248080 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#248081 = ORIENTED_EDGE('',*,*,#248082,.T.); +#248082 = EDGE_CURVE('',#248075,#248083,#248085,.T.); +#248083 = VERTEX_POINT('',#248084); +#248084 = CARTESIAN_POINT('',(198.523319,-46.803862,1.585)); +#248085 = LINE('',#248086,#248087); +#248086 = CARTESIAN_POINT('',(198.549996,-46.776154,1.585)); +#248087 = VECTOR('',#248088,1.); +#248088 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#248089 = ORIENTED_EDGE('',*,*,#248090,.T.); +#248090 = EDGE_CURVE('',#248083,#248091,#248093,.T.); +#248091 = VERTEX_POINT('',#248092); +#248092 = CARTESIAN_POINT('',(198.545278,-46.818695,1.585)); +#248093 = LINE('',#248094,#248095); +#248094 = CARTESIAN_POINT('',(198.523319,-46.803862,1.585)); +#248095 = VECTOR('',#248096,1.); +#248096 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#248097 = ORIENTED_EDGE('',*,*,#248098,.T.); +#248098 = EDGE_CURVE('',#248091,#248099,#248101,.T.); +#248099 = VERTEX_POINT('',#248100); +#248100 = CARTESIAN_POINT('',(198.606946,-46.885806,1.585)); +#248101 = LINE('',#248102,#248103); +#248102 = CARTESIAN_POINT('',(198.545278,-46.818695,1.585)); +#248103 = VECTOR('',#248104,1.); +#248104 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#248105 = ORIENTED_EDGE('',*,*,#248106,.T.); +#248106 = EDGE_CURVE('',#248099,#248107,#248109,.T.); +#248107 = VERTEX_POINT('',#248108); +#248108 = CARTESIAN_POINT('',(198.597615,-47.299963,1.585)); +#248109 = CIRCLE('',#248110,0.341850333486); +#248110 = AXIS2_PLACEMENT_3D('',#248111,#248112,#248113); +#248111 = CARTESIAN_POINT('',(198.33039659864,-47.08675892761,1.585)); +#248112 = DIRECTION('',(0.,0.,-1.)); +#248113 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#248114 = ORIENTED_EDGE('',*,*,#248115,.T.); +#248115 = EDGE_CURVE('',#248107,#248116,#248118,.T.); +#248116 = VERTEX_POINT('',#248117); +#248117 = CARTESIAN_POINT('',(198.532085,-47.363417,1.585)); +#248118 = LINE('',#248119,#248120); +#248119 = CARTESIAN_POINT('',(198.597615,-47.299963,1.585)); +#248120 = VECTOR('',#248121,1.); +#248121 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#248122 = ORIENTED_EDGE('',*,*,#248123,.T.); +#248123 = EDGE_CURVE('',#248116,#248124,#248126,.T.); +#248124 = VERTEX_POINT('',#248125); +#248125 = CARTESIAN_POINT('',(197.974387,-47.410279,1.585)); +#248126 = CIRCLE('',#248127,0.612118292739); +#248127 = AXIS2_PLACEMENT_3D('',#248128,#248129,#248130); +#248128 = CARTESIAN_POINT('',(198.20765114383,-46.84434910725,1.585)); +#248129 = DIRECTION('',(-0.,0.,-1.)); +#248130 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#248131 = ORIENTED_EDGE('',*,*,#248132,.T.); +#248132 = EDGE_CURVE('',#248124,#248133,#248135,.T.); +#248133 = VERTEX_POINT('',#248134); +#248134 = CARTESIAN_POINT('',(197.953695,-47.389587,1.585)); +#248135 = LINE('',#248136,#248137); +#248136 = CARTESIAN_POINT('',(197.974387,-47.410279,1.585)); +#248137 = VECTOR('',#248138,1.); +#248138 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#248139 = ORIENTED_EDGE('',*,*,#248140,.T.); +#248140 = EDGE_CURVE('',#248133,#248141,#248143,.T.); +#248141 = VERTEX_POINT('',#248142); +#248142 = CARTESIAN_POINT('',(197.941055,-47.347919,1.585)); +#248143 = LINE('',#248144,#248145); +#248144 = CARTESIAN_POINT('',(197.953695,-47.389587,1.585)); +#248145 = VECTOR('',#248146,1.); +#248146 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#248147 = ORIENTED_EDGE('',*,*,#248148,.T.); +#248148 = EDGE_CURVE('',#248141,#248039,#248149,.T.); +#248149 = LINE('',#248150,#248151); +#248150 = CARTESIAN_POINT('',(197.941055,-47.347919,1.585)); +#248151 = VECTOR('',#248152,1.); +#248152 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#248153 = FACE_BOUND('',#248154,.F.); +#248154 = EDGE_LOOP('',(#248155,#248165,#248173,#248181,#248189,#248198, + #248206,#248214)); +#248155 = ORIENTED_EDGE('',*,*,#248156,.T.); +#248156 = EDGE_CURVE('',#248157,#248159,#248161,.T.); +#248157 = VERTEX_POINT('',#248158); +#248158 = CARTESIAN_POINT('',(198.451731,-46.93728,1.585)); +#248159 = VERTEX_POINT('',#248160); +#248160 = CARTESIAN_POINT('',(198.337218,-46.899109,1.585)); +#248161 = LINE('',#248162,#248163); +#248162 = CARTESIAN_POINT('',(198.451731,-46.93728,1.585)); +#248163 = VECTOR('',#248164,1.); +#248164 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#248165 = ORIENTED_EDGE('',*,*,#248166,.T.); +#248166 = EDGE_CURVE('',#248159,#248167,#248169,.T.); +#248167 = VERTEX_POINT('',#248168); +#248168 = CARTESIAN_POINT('',(198.091055,-46.899109,1.585)); +#248169 = LINE('',#248170,#248171); +#248170 = CARTESIAN_POINT('',(198.337218,-46.899109,1.585)); +#248171 = VECTOR('',#248172,1.); +#248172 = DIRECTION('',(-1.,0.,0.)); +#248173 = ORIENTED_EDGE('',*,*,#248174,.T.); +#248174 = EDGE_CURVE('',#248167,#248175,#248177,.T.); +#248175 = VERTEX_POINT('',#248176); +#248176 = CARTESIAN_POINT('',(198.091055,-47.272919,1.585)); +#248177 = LINE('',#248178,#248179); +#248178 = CARTESIAN_POINT('',(198.091055,-46.899109,1.585)); +#248179 = VECTOR('',#248180,1.); +#248180 = DIRECTION('',(0.,-1.,0.)); +#248181 = ORIENTED_EDGE('',*,*,#248182,.T.); +#248182 = EDGE_CURVE('',#248175,#248183,#248185,.T.); +#248183 = VERTEX_POINT('',#248184); +#248184 = CARTESIAN_POINT('',(198.379302,-47.272919,1.585)); +#248185 = LINE('',#248186,#248187); +#248186 = CARTESIAN_POINT('',(198.091055,-47.272919,1.585)); +#248187 = VECTOR('',#248188,1.); +#248188 = DIRECTION('',(1.,0.,0.)); +#248189 = ORIENTED_EDGE('',*,*,#248190,.T.); +#248190 = EDGE_CURVE('',#248183,#248191,#248193,.T.); +#248191 = VERTEX_POINT('',#248192); +#248192 = CARTESIAN_POINT('',(198.512483,-47.139737,1.585)); +#248193 = CIRCLE('',#248194,0.186867760544); +#248194 = AXIS2_PLACEMENT_3D('',#248195,#248196,#248197); +#248195 = CARTESIAN_POINT('',(198.33176296928,-47.09219932622,1.585)); +#248196 = DIRECTION('',(0.,0.,1.)); +#248197 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#248198 = ORIENTED_EDGE('',*,*,#248199,.T.); +#248199 = EDGE_CURVE('',#248191,#248200,#248202,.T.); +#248200 = VERTEX_POINT('',#248201); +#248201 = CARTESIAN_POINT('',(198.512483,-47.03229,1.585)); +#248202 = LINE('',#248203,#248204); +#248203 = CARTESIAN_POINT('',(198.512483,-47.139737,1.585)); +#248204 = VECTOR('',#248205,1.); +#248205 = DIRECTION('',(0.,1.,0.)); +#248206 = ORIENTED_EDGE('',*,*,#248207,.T.); +#248207 = EDGE_CURVE('',#248200,#248208,#248210,.T.); +#248208 = VERTEX_POINT('',#248209); +#248209 = CARTESIAN_POINT('',(198.478225,-46.963774,1.585)); +#248210 = LINE('',#248211,#248212); +#248211 = CARTESIAN_POINT('',(198.512483,-47.03229,1.585)); +#248212 = VECTOR('',#248213,1.); +#248213 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#248214 = ORIENTED_EDGE('',*,*,#248215,.T.); +#248215 = EDGE_CURVE('',#248208,#248157,#248216,.T.); +#248216 = LINE('',#248217,#248218); +#248217 = CARTESIAN_POINT('',(198.478225,-46.963774,1.585)); +#248218 = VECTOR('',#248219,1.); +#248219 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248220 = FACE_BOUND('',#248221,.F.); +#248221 = EDGE_LOOP('',(#248222,#248233,#248241,#248249,#248257,#248266) + ); +#248222 = ORIENTED_EDGE('',*,*,#248223,.T.); +#248223 = EDGE_CURVE('',#248224,#248226,#248228,.T.); +#248224 = VERTEX_POINT('',#248225); +#248225 = CARTESIAN_POINT('',(198.464864,-46.5561,1.585)); +#248226 = VERTEX_POINT('',#248227); +#248227 = CARTESIAN_POINT('',(198.331683,-46.422919,1.585)); +#248228 = CIRCLE('',#248229,0.18686440374); +#248229 = AXIS2_PLACEMENT_3D('',#248230,#248231,#248232); +#248230 = CARTESIAN_POINT('',(198.284147,-46.603636,1.585)); +#248231 = DIRECTION('',(0.,0.,1.)); +#248232 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#248233 = ORIENTED_EDGE('',*,*,#248234,.T.); +#248234 = EDGE_CURVE('',#248226,#248235,#248237,.T.); +#248235 = VERTEX_POINT('',#248236); +#248236 = CARTESIAN_POINT('',(198.091055,-46.422919,1.585)); +#248237 = LINE('',#248238,#248239); +#248238 = CARTESIAN_POINT('',(198.331683,-46.422919,1.585)); +#248239 = VECTOR('',#248240,1.); +#248240 = DIRECTION('',(-1.,0.,0.)); +#248241 = ORIENTED_EDGE('',*,*,#248242,.T.); +#248242 = EDGE_CURVE('',#248235,#248243,#248245,.T.); +#248243 = VERTEX_POINT('',#248244); +#248244 = CARTESIAN_POINT('',(198.091055,-46.749109,1.585)); +#248245 = LINE('',#248246,#248247); +#248246 = CARTESIAN_POINT('',(198.091055,-46.422919,1.585)); +#248247 = VECTOR('',#248248,1.); +#248248 = DIRECTION('',(0.,-1.,0.)); +#248249 = ORIENTED_EDGE('',*,*,#248250,.T.); +#248250 = EDGE_CURVE('',#248243,#248251,#248253,.T.); +#248251 = VERTEX_POINT('',#248252); +#248252 = CARTESIAN_POINT('',(198.331683,-46.749109,1.585)); +#248253 = LINE('',#248254,#248255); +#248254 = CARTESIAN_POINT('',(198.091055,-46.749109,1.585)); +#248255 = VECTOR('',#248256,1.); +#248256 = DIRECTION('',(1.,0.,0.)); +#248257 = ORIENTED_EDGE('',*,*,#248258,.T.); +#248258 = EDGE_CURVE('',#248251,#248259,#248261,.T.); +#248259 = VERTEX_POINT('',#248260); +#248260 = CARTESIAN_POINT('',(198.464864,-46.615928,1.585)); +#248261 = CIRCLE('',#248262,0.18686440374); +#248262 = AXIS2_PLACEMENT_3D('',#248263,#248264,#248265); +#248263 = CARTESIAN_POINT('',(198.284147,-46.568392,1.585)); +#248264 = DIRECTION('',(0.,0.,1.)); +#248265 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248266 = ORIENTED_EDGE('',*,*,#248267,.T.); +#248267 = EDGE_CURVE('',#248259,#248224,#248268,.T.); +#248268 = LINE('',#248269,#248270); +#248269 = CARTESIAN_POINT('',(198.464864,-46.615928,1.585)); +#248270 = VECTOR('',#248271,1.); +#248271 = DIRECTION('',(0.,1.,0.)); +#248272 = PLANE('',#248273); +#248273 = AXIS2_PLACEMENT_3D('',#248274,#248275,#248276); +#248274 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248275 = DIRECTION('',(0.,0.,1.)); +#248276 = DIRECTION('',(1.,0.,-0.)); +#248277 = SHELL_BASED_SURFACE_MODEL('',(#248278)); +#248278 = OPEN_SHELL('',(#248279)); +#248279 = ADVANCED_FACE('',(#248280,#248398,#248465),#248517,.T.); +#248280 = FACE_BOUND('',#248281,.F.); +#248281 = EDGE_LOOP('',(#248282,#248293,#248301,#248310,#248318,#248326, + #248334,#248342,#248350,#248359,#248367,#248376,#248384,#248392)); +#248282 = ORIENTED_EDGE('',*,*,#248283,.T.); +#248283 = EDGE_CURVE('',#248284,#248286,#248288,.T.); +#248284 = VERTEX_POINT('',#248285); +#248285 = CARTESIAN_POINT('',(201.942496,-46.333287,1.585)); +#248286 = VERTEX_POINT('',#248287); +#248287 = CARTESIAN_POINT('',(202.016055,-46.272919,1.585)); +#248288 = CIRCLE('',#248289,7.500074938986E-02); +#248289 = AXIS2_PLACEMENT_3D('',#248290,#248291,#248292); +#248290 = CARTESIAN_POINT('',(202.01605546611,-46.34791974938,1.585)); +#248291 = DIRECTION('',(0.,0.,-1.)); +#248292 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#248293 = ORIENTED_EDGE('',*,*,#248294,.T.); +#248294 = EDGE_CURVE('',#248286,#248295,#248297,.T.); +#248295 = VERTEX_POINT('',#248296); +#248296 = CARTESIAN_POINT('',(202.36402,-46.27436,1.585)); +#248297 = LINE('',#248298,#248299); +#248298 = CARTESIAN_POINT('',(202.016055,-46.272919,1.585)); +#248299 = VECTOR('',#248300,1.); +#248300 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#248301 = ORIENTED_EDGE('',*,*,#248302,.T.); +#248302 = EDGE_CURVE('',#248295,#248303,#248305,.T.); +#248303 = VERTEX_POINT('',#248304); +#248304 = CARTESIAN_POINT('',(202.613423,-46.523763,1.585)); +#248305 = CIRCLE('',#248306,0.347870264855); +#248306 = AXIS2_PLACEMENT_3D('',#248307,#248308,#248309); +#248307 = CARTESIAN_POINT('',(202.27669226502,-46.61109073497,1.585)); +#248308 = DIRECTION('',(0.,0.,-1.)); +#248309 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#248310 = ORIENTED_EDGE('',*,*,#248311,.T.); +#248311 = EDGE_CURVE('',#248303,#248312,#248314,.T.); +#248312 = VERTEX_POINT('',#248313); +#248313 = CARTESIAN_POINT('',(202.612201,-46.653443,1.585)); +#248314 = LINE('',#248315,#248316); +#248315 = CARTESIAN_POINT('',(202.613423,-46.523763,1.585)); +#248316 = VECTOR('',#248317,1.); +#248317 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#248318 = ORIENTED_EDGE('',*,*,#248319,.T.); +#248319 = EDGE_CURVE('',#248312,#248320,#248322,.T.); +#248320 = VERTEX_POINT('',#248321); +#248321 = CARTESIAN_POINT('',(202.549996,-46.776154,1.585)); +#248322 = LINE('',#248323,#248324); +#248323 = CARTESIAN_POINT('',(202.612201,-46.653443,1.585)); +#248324 = VECTOR('',#248325,1.); +#248325 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#248326 = ORIENTED_EDGE('',*,*,#248327,.T.); +#248327 = EDGE_CURVE('',#248320,#248328,#248330,.T.); +#248328 = VERTEX_POINT('',#248329); +#248329 = CARTESIAN_POINT('',(202.523319,-46.803862,1.585)); +#248330 = LINE('',#248331,#248332); +#248331 = CARTESIAN_POINT('',(202.549996,-46.776154,1.585)); +#248332 = VECTOR('',#248333,1.); +#248333 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#248334 = ORIENTED_EDGE('',*,*,#248335,.T.); +#248335 = EDGE_CURVE('',#248328,#248336,#248338,.T.); +#248336 = VERTEX_POINT('',#248337); +#248337 = CARTESIAN_POINT('',(202.545278,-46.818695,1.585)); +#248338 = LINE('',#248339,#248340); +#248339 = CARTESIAN_POINT('',(202.523319,-46.803862,1.585)); +#248340 = VECTOR('',#248341,1.); +#248341 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#248342 = ORIENTED_EDGE('',*,*,#248343,.T.); +#248343 = EDGE_CURVE('',#248336,#248344,#248346,.T.); +#248344 = VERTEX_POINT('',#248345); +#248345 = CARTESIAN_POINT('',(202.606946,-46.885806,1.585)); +#248346 = LINE('',#248347,#248348); +#248347 = CARTESIAN_POINT('',(202.545278,-46.818695,1.585)); +#248348 = VECTOR('',#248349,1.); +#248349 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#248350 = ORIENTED_EDGE('',*,*,#248351,.T.); +#248351 = EDGE_CURVE('',#248344,#248352,#248354,.T.); +#248352 = VERTEX_POINT('',#248353); +#248353 = CARTESIAN_POINT('',(202.597615,-47.299963,1.585)); +#248354 = CIRCLE('',#248355,0.341850333486); +#248355 = AXIS2_PLACEMENT_3D('',#248356,#248357,#248358); +#248356 = CARTESIAN_POINT('',(202.33039659864,-47.08675892761,1.585)); +#248357 = DIRECTION('',(0.,0.,-1.)); +#248358 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#248359 = ORIENTED_EDGE('',*,*,#248360,.T.); +#248360 = EDGE_CURVE('',#248352,#248361,#248363,.T.); +#248361 = VERTEX_POINT('',#248362); +#248362 = CARTESIAN_POINT('',(202.532085,-47.363417,1.585)); +#248363 = LINE('',#248364,#248365); +#248364 = CARTESIAN_POINT('',(202.597615,-47.299963,1.585)); +#248365 = VECTOR('',#248366,1.); +#248366 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#248367 = ORIENTED_EDGE('',*,*,#248368,.T.); +#248368 = EDGE_CURVE('',#248361,#248369,#248371,.T.); +#248369 = VERTEX_POINT('',#248370); +#248370 = CARTESIAN_POINT('',(201.974387,-47.410279,1.585)); +#248371 = CIRCLE('',#248372,0.612118292739); +#248372 = AXIS2_PLACEMENT_3D('',#248373,#248374,#248375); +#248373 = CARTESIAN_POINT('',(202.20765114383,-46.84434910725,1.585)); +#248374 = DIRECTION('',(-0.,0.,-1.)); +#248375 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#248376 = ORIENTED_EDGE('',*,*,#248377,.T.); +#248377 = EDGE_CURVE('',#248369,#248378,#248380,.T.); +#248378 = VERTEX_POINT('',#248379); +#248379 = CARTESIAN_POINT('',(201.953695,-47.389587,1.585)); +#248380 = LINE('',#248381,#248382); +#248381 = CARTESIAN_POINT('',(201.974387,-47.410279,1.585)); +#248382 = VECTOR('',#248383,1.); +#248383 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#248384 = ORIENTED_EDGE('',*,*,#248385,.T.); +#248385 = EDGE_CURVE('',#248378,#248386,#248388,.T.); +#248386 = VERTEX_POINT('',#248387); +#248387 = CARTESIAN_POINT('',(201.941055,-47.347919,1.585)); +#248388 = LINE('',#248389,#248390); +#248389 = CARTESIAN_POINT('',(201.953695,-47.389587,1.585)); +#248390 = VECTOR('',#248391,1.); +#248391 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#248392 = ORIENTED_EDGE('',*,*,#248393,.T.); +#248393 = EDGE_CURVE('',#248386,#248284,#248394,.T.); +#248394 = LINE('',#248395,#248396); +#248395 = CARTESIAN_POINT('',(201.941055,-47.347919,1.585)); +#248396 = VECTOR('',#248397,1.); +#248397 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#248398 = FACE_BOUND('',#248399,.F.); +#248399 = EDGE_LOOP('',(#248400,#248410,#248418,#248426,#248434,#248443, + #248451,#248459)); +#248400 = ORIENTED_EDGE('',*,*,#248401,.T.); +#248401 = EDGE_CURVE('',#248402,#248404,#248406,.T.); +#248402 = VERTEX_POINT('',#248403); +#248403 = CARTESIAN_POINT('',(202.451731,-46.93728,1.585)); +#248404 = VERTEX_POINT('',#248405); +#248405 = CARTESIAN_POINT('',(202.337218,-46.899109,1.585)); +#248406 = LINE('',#248407,#248408); +#248407 = CARTESIAN_POINT('',(202.451731,-46.93728,1.585)); +#248408 = VECTOR('',#248409,1.); +#248409 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#248410 = ORIENTED_EDGE('',*,*,#248411,.T.); +#248411 = EDGE_CURVE('',#248404,#248412,#248414,.T.); +#248412 = VERTEX_POINT('',#248413); +#248413 = CARTESIAN_POINT('',(202.091055,-46.899109,1.585)); +#248414 = LINE('',#248415,#248416); +#248415 = CARTESIAN_POINT('',(202.337218,-46.899109,1.585)); +#248416 = VECTOR('',#248417,1.); +#248417 = DIRECTION('',(-1.,0.,0.)); +#248418 = ORIENTED_EDGE('',*,*,#248419,.T.); +#248419 = EDGE_CURVE('',#248412,#248420,#248422,.T.); +#248420 = VERTEX_POINT('',#248421); +#248421 = CARTESIAN_POINT('',(202.091055,-47.272919,1.585)); +#248422 = LINE('',#248423,#248424); +#248423 = CARTESIAN_POINT('',(202.091055,-46.899109,1.585)); +#248424 = VECTOR('',#248425,1.); +#248425 = DIRECTION('',(0.,-1.,0.)); +#248426 = ORIENTED_EDGE('',*,*,#248427,.T.); +#248427 = EDGE_CURVE('',#248420,#248428,#248430,.T.); +#248428 = VERTEX_POINT('',#248429); +#248429 = CARTESIAN_POINT('',(202.379302,-47.272919,1.585)); +#248430 = LINE('',#248431,#248432); +#248431 = CARTESIAN_POINT('',(202.091055,-47.272919,1.585)); +#248432 = VECTOR('',#248433,1.); +#248433 = DIRECTION('',(1.,0.,0.)); +#248434 = ORIENTED_EDGE('',*,*,#248435,.T.); +#248435 = EDGE_CURVE('',#248428,#248436,#248438,.T.); +#248436 = VERTEX_POINT('',#248437); +#248437 = CARTESIAN_POINT('',(202.512483,-47.139737,1.585)); +#248438 = CIRCLE('',#248439,0.186867760544); +#248439 = AXIS2_PLACEMENT_3D('',#248440,#248441,#248442); +#248440 = CARTESIAN_POINT('',(202.33176296928,-47.09219932622,1.585)); +#248441 = DIRECTION('',(0.,0.,1.)); +#248442 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#248443 = ORIENTED_EDGE('',*,*,#248444,.T.); +#248444 = EDGE_CURVE('',#248436,#248445,#248447,.T.); +#248445 = VERTEX_POINT('',#248446); +#248446 = CARTESIAN_POINT('',(202.512483,-47.03229,1.585)); +#248447 = LINE('',#248448,#248449); +#248448 = CARTESIAN_POINT('',(202.512483,-47.139737,1.585)); +#248449 = VECTOR('',#248450,1.); +#248450 = DIRECTION('',(0.,1.,0.)); +#248451 = ORIENTED_EDGE('',*,*,#248452,.T.); +#248452 = EDGE_CURVE('',#248445,#248453,#248455,.T.); +#248453 = VERTEX_POINT('',#248454); +#248454 = CARTESIAN_POINT('',(202.478225,-46.963774,1.585)); +#248455 = LINE('',#248456,#248457); +#248456 = CARTESIAN_POINT('',(202.512483,-47.03229,1.585)); +#248457 = VECTOR('',#248458,1.); +#248458 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#248459 = ORIENTED_EDGE('',*,*,#248460,.T.); +#248460 = EDGE_CURVE('',#248453,#248402,#248461,.T.); +#248461 = LINE('',#248462,#248463); +#248462 = CARTESIAN_POINT('',(202.478225,-46.963774,1.585)); +#248463 = VECTOR('',#248464,1.); +#248464 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248465 = FACE_BOUND('',#248466,.F.); +#248466 = EDGE_LOOP('',(#248467,#248478,#248486,#248494,#248502,#248511) + ); +#248467 = ORIENTED_EDGE('',*,*,#248468,.T.); +#248468 = EDGE_CURVE('',#248469,#248471,#248473,.T.); +#248469 = VERTEX_POINT('',#248470); +#248470 = CARTESIAN_POINT('',(202.464864,-46.5561,1.585)); +#248471 = VERTEX_POINT('',#248472); +#248472 = CARTESIAN_POINT('',(202.331683,-46.422919,1.585)); +#248473 = CIRCLE('',#248474,0.18686440374); +#248474 = AXIS2_PLACEMENT_3D('',#248475,#248476,#248477); +#248475 = CARTESIAN_POINT('',(202.284147,-46.603636,1.585)); +#248476 = DIRECTION('',(0.,0.,1.)); +#248477 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#248478 = ORIENTED_EDGE('',*,*,#248479,.T.); +#248479 = EDGE_CURVE('',#248471,#248480,#248482,.T.); +#248480 = VERTEX_POINT('',#248481); +#248481 = CARTESIAN_POINT('',(202.091055,-46.422919,1.585)); +#248482 = LINE('',#248483,#248484); +#248483 = CARTESIAN_POINT('',(202.331683,-46.422919,1.585)); +#248484 = VECTOR('',#248485,1.); +#248485 = DIRECTION('',(-1.,0.,0.)); +#248486 = ORIENTED_EDGE('',*,*,#248487,.T.); +#248487 = EDGE_CURVE('',#248480,#248488,#248490,.T.); +#248488 = VERTEX_POINT('',#248489); +#248489 = CARTESIAN_POINT('',(202.091055,-46.749109,1.585)); +#248490 = LINE('',#248491,#248492); +#248491 = CARTESIAN_POINT('',(202.091055,-46.422919,1.585)); +#248492 = VECTOR('',#248493,1.); +#248493 = DIRECTION('',(0.,-1.,0.)); +#248494 = ORIENTED_EDGE('',*,*,#248495,.T.); +#248495 = EDGE_CURVE('',#248488,#248496,#248498,.T.); +#248496 = VERTEX_POINT('',#248497); +#248497 = CARTESIAN_POINT('',(202.331683,-46.749109,1.585)); +#248498 = LINE('',#248499,#248500); +#248499 = CARTESIAN_POINT('',(202.091055,-46.749109,1.585)); +#248500 = VECTOR('',#248501,1.); +#248501 = DIRECTION('',(1.,0.,0.)); +#248502 = ORIENTED_EDGE('',*,*,#248503,.T.); +#248503 = EDGE_CURVE('',#248496,#248504,#248506,.T.); +#248504 = VERTEX_POINT('',#248505); +#248505 = CARTESIAN_POINT('',(202.464864,-46.615928,1.585)); +#248506 = CIRCLE('',#248507,0.18686440374); +#248507 = AXIS2_PLACEMENT_3D('',#248508,#248509,#248510); +#248508 = CARTESIAN_POINT('',(202.284147,-46.568392,1.585)); +#248509 = DIRECTION('',(0.,0.,1.)); +#248510 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248511 = ORIENTED_EDGE('',*,*,#248512,.T.); +#248512 = EDGE_CURVE('',#248504,#248469,#248513,.T.); +#248513 = LINE('',#248514,#248515); +#248514 = CARTESIAN_POINT('',(202.464864,-46.615928,1.585)); +#248515 = VECTOR('',#248516,1.); +#248516 = DIRECTION('',(0.,1.,0.)); +#248517 = PLANE('',#248518); +#248518 = AXIS2_PLACEMENT_3D('',#248519,#248520,#248521); +#248519 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248520 = DIRECTION('',(0.,0.,1.)); +#248521 = DIRECTION('',(1.,0.,-0.)); +#248522 = SHELL_BASED_SURFACE_MODEL('',(#248523)); +#248523 = OPEN_SHELL('',(#248524)); +#248524 = ADVANCED_FACE('',(#248525),#248711,.T.); +#248525 = FACE_BOUND('',#248526,.F.); +#248526 = EDGE_LOOP('',(#248527,#248538,#248546,#248555,#248563,#248571, + #248580,#248588,#248597,#248605,#248613,#248621,#248630,#248638, + #248647,#248655,#248664,#248672,#248680,#248688,#248697,#248705)); +#248527 = ORIENTED_EDGE('',*,*,#248528,.T.); +#248528 = EDGE_CURVE('',#248529,#248531,#248533,.T.); +#248529 = VERTEX_POINT('',#248530); +#248530 = CARTESIAN_POINT('',(202.906185,-46.421478,1.585)); +#248531 = VERTEX_POINT('',#248532); +#248532 = CARTESIAN_POINT('',(202.920817,-46.272919,1.585)); +#248533 = CIRCLE('',#248534,7.500006711464E-02); +#248534 = AXIS2_PLACEMENT_3D('',#248535,#248536,#248537); +#248535 = CARTESIAN_POINT('',(202.92081693288,-46.34791906711,1.585)); +#248536 = DIRECTION('',(0.,0.,-1.)); +#248537 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#248538 = ORIENTED_EDGE('',*,*,#248539,.T.); +#248539 = EDGE_CURVE('',#248531,#248540,#248542,.T.); +#248540 = VERTEX_POINT('',#248541); +#248541 = CARTESIAN_POINT('',(203.547602,-46.273681,1.585)); +#248542 = LINE('',#248543,#248544); +#248543 = CARTESIAN_POINT('',(202.920817,-46.272919,1.585)); +#248544 = VECTOR('',#248545,1.); +#248545 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#248546 = ORIENTED_EDGE('',*,*,#248547,.T.); +#248547 = EDGE_CURVE('',#248540,#248548,#248550,.T.); +#248548 = VERTEX_POINT('',#248549); +#248549 = CARTESIAN_POINT('',(203.613423,-46.362551,1.585)); +#248550 = CIRCLE('',#248551,7.447391611626E-02); +#248551 = AXIS2_PLACEMENT_3D('',#248552,#248553,#248554); +#248552 = CARTESIAN_POINT('',(203.54042292664,-46.3478080874,1.585)); +#248553 = DIRECTION('',(0.,0.,-1.)); +#248554 = DIRECTION('',(9.639715124815E-02,0.995342950561,0.)); +#248555 = ORIENTED_EDGE('',*,*,#248556,.T.); +#248556 = EDGE_CURVE('',#248548,#248557,#248559,.T.); +#248557 = VERTEX_POINT('',#248558); +#248558 = CARTESIAN_POINT('',(203.596307,-46.397307,1.585)); +#248559 = LINE('',#248560,#248561); +#248560 = CARTESIAN_POINT('',(203.613423,-46.362551,1.585)); +#248561 = VECTOR('',#248562,1.); +#248562 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#248563 = ORIENTED_EDGE('',*,*,#248564,.T.); +#248564 = EDGE_CURVE('',#248557,#248565,#248567,.T.); +#248565 = VERTEX_POINT('',#248566); +#248566 = CARTESIAN_POINT('',(203.369411,-46.656616,1.585)); +#248567 = LINE('',#248568,#248569); +#248568 = CARTESIAN_POINT('',(203.596307,-46.397307,1.585)); +#248569 = VECTOR('',#248570,1.); +#248570 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#248571 = ORIENTED_EDGE('',*,*,#248572,.T.); +#248572 = EDGE_CURVE('',#248565,#248573,#248575,.T.); +#248573 = VERTEX_POINT('',#248574); +#248574 = CARTESIAN_POINT('',(203.613423,-46.904715,1.585)); +#248575 = CIRCLE('',#248576,0.348520834816); +#248576 = AXIS2_PLACEMENT_3D('',#248577,#248578,#248579); +#248577 = CARTESIAN_POINT('',(203.2761176174,-46.99241819931,1.585)); +#248578 = DIRECTION('',(0.,0.,-1.)); +#248579 = DIRECTION('',(0.267683803322,0.963506814423,0.)); +#248580 = ORIENTED_EDGE('',*,*,#248581,.T.); +#248581 = EDGE_CURVE('',#248573,#248582,#248584,.T.); +#248582 = VERTEX_POINT('',#248583); +#248583 = CARTESIAN_POINT('',(203.612201,-47.177252,1.585)); +#248584 = LINE('',#248585,#248586); +#248585 = CARTESIAN_POINT('',(203.613423,-46.904715,1.585)); +#248586 = VECTOR('',#248587,1.); +#248587 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#248588 = ORIENTED_EDGE('',*,*,#248589,.T.); +#248589 = EDGE_CURVE('',#248582,#248590,#248592,.T.); +#248590 = VERTEX_POINT('',#248591); +#248591 = CARTESIAN_POINT('',(203.36402,-47.421478,1.585)); +#248592 = CIRCLE('',#248593,0.348635327447); +#248593 = AXIS2_PLACEMENT_3D('',#248594,#248595,#248596); +#248594 = CARTESIAN_POINT('',(203.27624848129,-47.08407208415,1.585)); +#248595 = DIRECTION('',(0.,0.,-1.)); +#248596 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#248597 = ORIENTED_EDGE('',*,*,#248598,.T.); +#248598 = EDGE_CURVE('',#248590,#248599,#248601,.T.); +#248599 = VERTEX_POINT('',#248600); +#248600 = CARTESIAN_POINT('',(203.043864,-47.420256,1.585)); +#248601 = LINE('',#248602,#248603); +#248602 = CARTESIAN_POINT('',(203.36402,-47.421478,1.585)); +#248603 = VECTOR('',#248604,1.); +#248604 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#248605 = ORIENTED_EDGE('',*,*,#248606,.T.); +#248606 = EDGE_CURVE('',#248599,#248607,#248609,.T.); +#248607 = VERTEX_POINT('',#248608); +#248608 = CARTESIAN_POINT('',(202.921151,-47.35805,1.585)); +#248609 = LINE('',#248610,#248611); +#248610 = CARTESIAN_POINT('',(203.043864,-47.420256,1.585)); +#248611 = VECTOR('',#248612,1.); +#248612 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#248613 = ORIENTED_EDGE('',*,*,#248614,.T.); +#248614 = EDGE_CURVE('',#248607,#248615,#248617,.T.); +#248615 = VERTEX_POINT('',#248616); +#248616 = CARTESIAN_POINT('',(202.858456,-47.294347,1.585)); +#248617 = LINE('',#248618,#248619); +#248618 = CARTESIAN_POINT('',(202.921151,-47.35805,1.585)); +#248619 = VECTOR('',#248620,1.); +#248620 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#248621 = ORIENTED_EDGE('',*,*,#248622,.T.); +#248622 = EDGE_CURVE('',#248615,#248623,#248625,.T.); +#248623 = VERTEX_POINT('',#248624); +#248624 = CARTESIAN_POINT('',(202.973851,-47.199648,1.585)); +#248625 = CIRCLE('',#248626,7.500012668041E-02); +#248626 = AXIS2_PLACEMENT_3D('',#248627,#248628,#248629); +#248627 = CARTESIAN_POINT('',(202.92081705199,-47.25268024831,1.585)); +#248628 = DIRECTION('',(0.,0.,-1.)); +#248629 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#248630 = ORIENTED_EDGE('',*,*,#248631,.T.); +#248631 = EDGE_CURVE('',#248623,#248632,#248634,.T.); +#248632 = VERTEX_POINT('',#248633); +#248633 = CARTESIAN_POINT('',(203.012863,-47.238661,1.585)); +#248634 = LINE('',#248635,#248636); +#248635 = CARTESIAN_POINT('',(202.973851,-47.199648,1.585)); +#248636 = VECTOR('',#248637,1.); +#248637 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#248638 = ORIENTED_EDGE('',*,*,#248639,.T.); +#248639 = EDGE_CURVE('',#248632,#248640,#248642,.T.); +#248640 = VERTEX_POINT('',#248641); +#248641 = CARTESIAN_POINT('',(203.400198,-47.238661,1.585)); +#248642 = CIRCLE('',#248643,0.358502380266); +#248643 = AXIS2_PLACEMENT_3D('',#248644,#248645,#248646); +#248644 = CARTESIAN_POINT('',(203.2065305,-46.936971,1.585)); +#248645 = DIRECTION('',(0.,0.,1.)); +#248646 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#248647 = ORIENTED_EDGE('',*,*,#248648,.T.); +#248648 = EDGE_CURVE('',#248640,#248649,#248651,.T.); +#248649 = VERTEX_POINT('',#248650); +#248650 = CARTESIAN_POINT('',(203.430605,-47.208253,1.585)); +#248651 = LINE('',#248652,#248653); +#248652 = CARTESIAN_POINT('',(203.400198,-47.238661,1.585)); +#248653 = VECTOR('',#248654,1.); +#248654 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#248655 = ORIENTED_EDGE('',*,*,#248656,.T.); +#248656 = EDGE_CURVE('',#248649,#248657,#248659,.T.); +#248657 = VERTEX_POINT('',#248658); +#248658 = CARTESIAN_POINT('',(203.430606,-46.868536,1.585)); +#248659 = CIRCLE('',#248660,0.305616146029); +#248660 = AXIS2_PLACEMENT_3D('',#248661,#248662,#248663); +#248661 = CARTESIAN_POINT('',(203.17653992049,-47.03839375212,1.585)); +#248662 = DIRECTION('',(0.,-0.,1.)); +#248663 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#248664 = ORIENTED_EDGE('',*,*,#248665,.T.); +#248665 = EDGE_CURVE('',#248657,#248666,#248668,.T.); +#248666 = VERTEX_POINT('',#248667); +#248667 = CARTESIAN_POINT('',(203.400199,-46.838129,1.585)); +#248668 = LINE('',#248669,#248670); +#248669 = CARTESIAN_POINT('',(203.430606,-46.868536,1.585)); +#248670 = VECTOR('',#248671,1.); +#248671 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248672 = ORIENTED_EDGE('',*,*,#248673,.T.); +#248673 = EDGE_CURVE('',#248666,#248674,#248676,.T.); +#248674 = VERTEX_POINT('',#248675); +#248675 = CARTESIAN_POINT('',(203.331683,-46.803871,1.585)); +#248676 = LINE('',#248677,#248678); +#248677 = CARTESIAN_POINT('',(203.400199,-46.838129,1.585)); +#248678 = VECTOR('',#248679,1.); +#248679 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#248680 = ORIENTED_EDGE('',*,*,#248681,.T.); +#248681 = EDGE_CURVE('',#248674,#248682,#248684,.T.); +#248682 = VERTEX_POINT('',#248683); +#248683 = CARTESIAN_POINT('',(203.191899,-46.80243,1.585)); +#248684 = LINE('',#248685,#248686); +#248685 = CARTESIAN_POINT('',(203.331683,-46.803871,1.585)); +#248686 = VECTOR('',#248687,1.); +#248687 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#248688 = ORIENTED_EDGE('',*,*,#248689,.T.); +#248689 = EDGE_CURVE('',#248682,#248690,#248692,.T.); +#248690 = VERTEX_POINT('',#248691); +#248691 = CARTESIAN_POINT('',(203.150088,-46.679483,1.585)); +#248692 = CIRCLE('',#248693,7.500015628756E-02); +#248693 = AXIS2_PLACEMENT_3D('',#248694,#248695,#248696); +#248694 = CARTESIAN_POINT('',(203.20653128432,-46.7288710461,1.585)); +#248695 = DIRECTION('',(0.,0.,-1.)); +#248696 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#248697 = ORIENTED_EDGE('',*,*,#248698,.T.); +#248698 = EDGE_CURVE('',#248690,#248699,#248701,.T.); +#248699 = VERTEX_POINT('',#248700); +#248700 = CARTESIAN_POINT('',(203.374582,-46.422919,1.585)); +#248701 = LINE('',#248702,#248703); +#248702 = CARTESIAN_POINT('',(203.150088,-46.679483,1.585)); +#248703 = VECTOR('',#248704,1.); +#248704 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#248705 = ORIENTED_EDGE('',*,*,#248706,.T.); +#248706 = EDGE_CURVE('',#248699,#248529,#248707,.T.); +#248707 = LINE('',#248708,#248709); +#248708 = CARTESIAN_POINT('',(203.374582,-46.422919,1.585)); +#248709 = VECTOR('',#248710,1.); +#248710 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#248711 = PLANE('',#248712); +#248712 = AXIS2_PLACEMENT_3D('',#248713,#248714,#248715); +#248713 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248714 = DIRECTION('',(0.,0.,1.)); +#248715 = DIRECTION('',(1.,0.,-0.)); +#248716 = SHELL_BASED_SURFACE_MODEL('',(#248717)); +#248717 = OPEN_SHELL('',(#248718)); +#248718 = ADVANCED_FACE('',(#248719,#248837,#248904),#248956,.T.); +#248719 = FACE_BOUND('',#248720,.F.); +#248720 = EDGE_LOOP('',(#248721,#248732,#248740,#248749,#248757,#248765, + #248773,#248781,#248789,#248798,#248806,#248815,#248823,#248831)); +#248721 = ORIENTED_EDGE('',*,*,#248722,.T.); +#248722 = EDGE_CURVE('',#248723,#248725,#248727,.T.); +#248723 = VERTEX_POINT('',#248724); +#248724 = CARTESIAN_POINT('',(205.942496,-46.333287,1.585)); +#248725 = VERTEX_POINT('',#248726); +#248726 = CARTESIAN_POINT('',(206.016055,-46.272919,1.585)); +#248727 = CIRCLE('',#248728,7.500074938986E-02); +#248728 = AXIS2_PLACEMENT_3D('',#248729,#248730,#248731); +#248729 = CARTESIAN_POINT('',(206.01605546611,-46.34791974938,1.585)); +#248730 = DIRECTION('',(0.,0.,-1.)); +#248731 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#248732 = ORIENTED_EDGE('',*,*,#248733,.T.); +#248733 = EDGE_CURVE('',#248725,#248734,#248736,.T.); +#248734 = VERTEX_POINT('',#248735); +#248735 = CARTESIAN_POINT('',(206.36402,-46.27436,1.585)); +#248736 = LINE('',#248737,#248738); +#248737 = CARTESIAN_POINT('',(206.016055,-46.272919,1.585)); +#248738 = VECTOR('',#248739,1.); +#248739 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#248740 = ORIENTED_EDGE('',*,*,#248741,.T.); +#248741 = EDGE_CURVE('',#248734,#248742,#248744,.T.); +#248742 = VERTEX_POINT('',#248743); +#248743 = CARTESIAN_POINT('',(206.613423,-46.523763,1.585)); +#248744 = CIRCLE('',#248745,0.347870264855); +#248745 = AXIS2_PLACEMENT_3D('',#248746,#248747,#248748); +#248746 = CARTESIAN_POINT('',(206.27669226502,-46.61109073497,1.585)); +#248747 = DIRECTION('',(0.,0.,-1.)); +#248748 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#248749 = ORIENTED_EDGE('',*,*,#248750,.T.); +#248750 = EDGE_CURVE('',#248742,#248751,#248753,.T.); +#248751 = VERTEX_POINT('',#248752); +#248752 = CARTESIAN_POINT('',(206.612201,-46.653443,1.585)); +#248753 = LINE('',#248754,#248755); +#248754 = CARTESIAN_POINT('',(206.613423,-46.523763,1.585)); +#248755 = VECTOR('',#248756,1.); +#248756 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#248757 = ORIENTED_EDGE('',*,*,#248758,.T.); +#248758 = EDGE_CURVE('',#248751,#248759,#248761,.T.); +#248759 = VERTEX_POINT('',#248760); +#248760 = CARTESIAN_POINT('',(206.549996,-46.776154,1.585)); +#248761 = LINE('',#248762,#248763); +#248762 = CARTESIAN_POINT('',(206.612201,-46.653443,1.585)); +#248763 = VECTOR('',#248764,1.); +#248764 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#248765 = ORIENTED_EDGE('',*,*,#248766,.T.); +#248766 = EDGE_CURVE('',#248759,#248767,#248769,.T.); +#248767 = VERTEX_POINT('',#248768); +#248768 = CARTESIAN_POINT('',(206.523319,-46.803862,1.585)); +#248769 = LINE('',#248770,#248771); +#248770 = CARTESIAN_POINT('',(206.549996,-46.776154,1.585)); +#248771 = VECTOR('',#248772,1.); +#248772 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#248773 = ORIENTED_EDGE('',*,*,#248774,.T.); +#248774 = EDGE_CURVE('',#248767,#248775,#248777,.T.); +#248775 = VERTEX_POINT('',#248776); +#248776 = CARTESIAN_POINT('',(206.545278,-46.818695,1.585)); +#248777 = LINE('',#248778,#248779); +#248778 = CARTESIAN_POINT('',(206.523319,-46.803862,1.585)); +#248779 = VECTOR('',#248780,1.); +#248780 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#248781 = ORIENTED_EDGE('',*,*,#248782,.T.); +#248782 = EDGE_CURVE('',#248775,#248783,#248785,.T.); +#248783 = VERTEX_POINT('',#248784); +#248784 = CARTESIAN_POINT('',(206.606946,-46.885806,1.585)); +#248785 = LINE('',#248786,#248787); +#248786 = CARTESIAN_POINT('',(206.545278,-46.818695,1.585)); +#248787 = VECTOR('',#248788,1.); +#248788 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#248789 = ORIENTED_EDGE('',*,*,#248790,.T.); +#248790 = EDGE_CURVE('',#248783,#248791,#248793,.T.); +#248791 = VERTEX_POINT('',#248792); +#248792 = CARTESIAN_POINT('',(206.597615,-47.299963,1.585)); +#248793 = CIRCLE('',#248794,0.341850333486); +#248794 = AXIS2_PLACEMENT_3D('',#248795,#248796,#248797); +#248795 = CARTESIAN_POINT('',(206.33039659864,-47.08675892761,1.585)); +#248796 = DIRECTION('',(0.,0.,-1.)); +#248797 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#248798 = ORIENTED_EDGE('',*,*,#248799,.T.); +#248799 = EDGE_CURVE('',#248791,#248800,#248802,.T.); +#248800 = VERTEX_POINT('',#248801); +#248801 = CARTESIAN_POINT('',(206.532085,-47.363417,1.585)); +#248802 = LINE('',#248803,#248804); +#248803 = CARTESIAN_POINT('',(206.597615,-47.299963,1.585)); +#248804 = VECTOR('',#248805,1.); +#248805 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#248806 = ORIENTED_EDGE('',*,*,#248807,.T.); +#248807 = EDGE_CURVE('',#248800,#248808,#248810,.T.); +#248808 = VERTEX_POINT('',#248809); +#248809 = CARTESIAN_POINT('',(205.974387,-47.410279,1.585)); +#248810 = CIRCLE('',#248811,0.612118292739); +#248811 = AXIS2_PLACEMENT_3D('',#248812,#248813,#248814); +#248812 = CARTESIAN_POINT('',(206.20765114383,-46.84434910725,1.585)); +#248813 = DIRECTION('',(-0.,0.,-1.)); +#248814 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#248815 = ORIENTED_EDGE('',*,*,#248816,.T.); +#248816 = EDGE_CURVE('',#248808,#248817,#248819,.T.); +#248817 = VERTEX_POINT('',#248818); +#248818 = CARTESIAN_POINT('',(205.953695,-47.389587,1.585)); +#248819 = LINE('',#248820,#248821); +#248820 = CARTESIAN_POINT('',(205.974387,-47.410279,1.585)); +#248821 = VECTOR('',#248822,1.); +#248822 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#248823 = ORIENTED_EDGE('',*,*,#248824,.T.); +#248824 = EDGE_CURVE('',#248817,#248825,#248827,.T.); +#248825 = VERTEX_POINT('',#248826); +#248826 = CARTESIAN_POINT('',(205.941055,-47.347919,1.585)); +#248827 = LINE('',#248828,#248829); +#248828 = CARTESIAN_POINT('',(205.953695,-47.389587,1.585)); +#248829 = VECTOR('',#248830,1.); +#248830 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#248831 = ORIENTED_EDGE('',*,*,#248832,.T.); +#248832 = EDGE_CURVE('',#248825,#248723,#248833,.T.); +#248833 = LINE('',#248834,#248835); +#248834 = CARTESIAN_POINT('',(205.941055,-47.347919,1.585)); +#248835 = VECTOR('',#248836,1.); +#248836 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#248837 = FACE_BOUND('',#248838,.F.); +#248838 = EDGE_LOOP('',(#248839,#248849,#248857,#248865,#248873,#248882, + #248890,#248898)); +#248839 = ORIENTED_EDGE('',*,*,#248840,.T.); +#248840 = EDGE_CURVE('',#248841,#248843,#248845,.T.); +#248841 = VERTEX_POINT('',#248842); +#248842 = CARTESIAN_POINT('',(206.451731,-46.93728,1.585)); +#248843 = VERTEX_POINT('',#248844); +#248844 = CARTESIAN_POINT('',(206.337218,-46.899109,1.585)); +#248845 = LINE('',#248846,#248847); +#248846 = CARTESIAN_POINT('',(206.451731,-46.93728,1.585)); +#248847 = VECTOR('',#248848,1.); +#248848 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#248849 = ORIENTED_EDGE('',*,*,#248850,.T.); +#248850 = EDGE_CURVE('',#248843,#248851,#248853,.T.); +#248851 = VERTEX_POINT('',#248852); +#248852 = CARTESIAN_POINT('',(206.091055,-46.899109,1.585)); +#248853 = LINE('',#248854,#248855); +#248854 = CARTESIAN_POINT('',(206.337218,-46.899109,1.585)); +#248855 = VECTOR('',#248856,1.); +#248856 = DIRECTION('',(-1.,0.,0.)); +#248857 = ORIENTED_EDGE('',*,*,#248858,.T.); +#248858 = EDGE_CURVE('',#248851,#248859,#248861,.T.); +#248859 = VERTEX_POINT('',#248860); +#248860 = CARTESIAN_POINT('',(206.091055,-47.272919,1.585)); +#248861 = LINE('',#248862,#248863); +#248862 = CARTESIAN_POINT('',(206.091055,-46.899109,1.585)); +#248863 = VECTOR('',#248864,1.); +#248864 = DIRECTION('',(0.,-1.,0.)); +#248865 = ORIENTED_EDGE('',*,*,#248866,.T.); +#248866 = EDGE_CURVE('',#248859,#248867,#248869,.T.); +#248867 = VERTEX_POINT('',#248868); +#248868 = CARTESIAN_POINT('',(206.379302,-47.272919,1.585)); +#248869 = LINE('',#248870,#248871); +#248870 = CARTESIAN_POINT('',(206.091055,-47.272919,1.585)); +#248871 = VECTOR('',#248872,1.); +#248872 = DIRECTION('',(1.,0.,0.)); +#248873 = ORIENTED_EDGE('',*,*,#248874,.T.); +#248874 = EDGE_CURVE('',#248867,#248875,#248877,.T.); +#248875 = VERTEX_POINT('',#248876); +#248876 = CARTESIAN_POINT('',(206.512483,-47.139737,1.585)); +#248877 = CIRCLE('',#248878,0.186867760544); +#248878 = AXIS2_PLACEMENT_3D('',#248879,#248880,#248881); +#248879 = CARTESIAN_POINT('',(206.33176296928,-47.09219932622,1.585)); +#248880 = DIRECTION('',(0.,0.,1.)); +#248881 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#248882 = ORIENTED_EDGE('',*,*,#248883,.T.); +#248883 = EDGE_CURVE('',#248875,#248884,#248886,.T.); +#248884 = VERTEX_POINT('',#248885); +#248885 = CARTESIAN_POINT('',(206.512483,-47.03229,1.585)); +#248886 = LINE('',#248887,#248888); +#248887 = CARTESIAN_POINT('',(206.512483,-47.139737,1.585)); +#248888 = VECTOR('',#248889,1.); +#248889 = DIRECTION('',(0.,1.,0.)); +#248890 = ORIENTED_EDGE('',*,*,#248891,.T.); +#248891 = EDGE_CURVE('',#248884,#248892,#248894,.T.); +#248892 = VERTEX_POINT('',#248893); +#248893 = CARTESIAN_POINT('',(206.478225,-46.963774,1.585)); +#248894 = LINE('',#248895,#248896); +#248895 = CARTESIAN_POINT('',(206.512483,-47.03229,1.585)); +#248896 = VECTOR('',#248897,1.); +#248897 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#248898 = ORIENTED_EDGE('',*,*,#248899,.T.); +#248899 = EDGE_CURVE('',#248892,#248841,#248900,.T.); +#248900 = LINE('',#248901,#248902); +#248901 = CARTESIAN_POINT('',(206.478225,-46.963774,1.585)); +#248902 = VECTOR('',#248903,1.); +#248903 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#248904 = FACE_BOUND('',#248905,.F.); +#248905 = EDGE_LOOP('',(#248906,#248917,#248925,#248933,#248941,#248950) + ); +#248906 = ORIENTED_EDGE('',*,*,#248907,.T.); +#248907 = EDGE_CURVE('',#248908,#248910,#248912,.T.); +#248908 = VERTEX_POINT('',#248909); +#248909 = CARTESIAN_POINT('',(206.464864,-46.5561,1.585)); +#248910 = VERTEX_POINT('',#248911); +#248911 = CARTESIAN_POINT('',(206.331683,-46.422919,1.585)); +#248912 = CIRCLE('',#248913,0.18686440374); +#248913 = AXIS2_PLACEMENT_3D('',#248914,#248915,#248916); +#248914 = CARTESIAN_POINT('',(206.284147,-46.603636,1.585)); +#248915 = DIRECTION('',(0.,0.,1.)); +#248916 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#248917 = ORIENTED_EDGE('',*,*,#248918,.T.); +#248918 = EDGE_CURVE('',#248910,#248919,#248921,.T.); +#248919 = VERTEX_POINT('',#248920); +#248920 = CARTESIAN_POINT('',(206.091055,-46.422919,1.585)); +#248921 = LINE('',#248922,#248923); +#248922 = CARTESIAN_POINT('',(206.331683,-46.422919,1.585)); +#248923 = VECTOR('',#248924,1.); +#248924 = DIRECTION('',(-1.,0.,0.)); +#248925 = ORIENTED_EDGE('',*,*,#248926,.T.); +#248926 = EDGE_CURVE('',#248919,#248927,#248929,.T.); +#248927 = VERTEX_POINT('',#248928); +#248928 = CARTESIAN_POINT('',(206.091055,-46.749109,1.585)); +#248929 = LINE('',#248930,#248931); +#248930 = CARTESIAN_POINT('',(206.091055,-46.422919,1.585)); +#248931 = VECTOR('',#248932,1.); +#248932 = DIRECTION('',(0.,-1.,0.)); +#248933 = ORIENTED_EDGE('',*,*,#248934,.T.); +#248934 = EDGE_CURVE('',#248927,#248935,#248937,.T.); +#248935 = VERTEX_POINT('',#248936); +#248936 = CARTESIAN_POINT('',(206.331683,-46.749109,1.585)); +#248937 = LINE('',#248938,#248939); +#248938 = CARTESIAN_POINT('',(206.091055,-46.749109,1.585)); +#248939 = VECTOR('',#248940,1.); +#248940 = DIRECTION('',(1.,0.,0.)); +#248941 = ORIENTED_EDGE('',*,*,#248942,.T.); +#248942 = EDGE_CURVE('',#248935,#248943,#248945,.T.); +#248943 = VERTEX_POINT('',#248944); +#248944 = CARTESIAN_POINT('',(206.464864,-46.615928,1.585)); +#248945 = CIRCLE('',#248946,0.18686440374); +#248946 = AXIS2_PLACEMENT_3D('',#248947,#248948,#248949); +#248947 = CARTESIAN_POINT('',(206.284147,-46.568392,1.585)); +#248948 = DIRECTION('',(0.,0.,1.)); +#248949 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#248950 = ORIENTED_EDGE('',*,*,#248951,.T.); +#248951 = EDGE_CURVE('',#248943,#248908,#248952,.T.); +#248952 = LINE('',#248953,#248954); +#248953 = CARTESIAN_POINT('',(206.464864,-46.615928,1.585)); +#248954 = VECTOR('',#248955,1.); +#248955 = DIRECTION('',(0.,1.,0.)); +#248956 = PLANE('',#248957); +#248957 = AXIS2_PLACEMENT_3D('',#248958,#248959,#248960); +#248958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#248959 = DIRECTION('',(0.,0.,1.)); +#248960 = DIRECTION('',(1.,0.,-0.)); +#248961 = SHELL_BASED_SURFACE_MODEL('',(#248962)); +#248962 = OPEN_SHELL('',(#248963)); +#248963 = ADVANCED_FACE('',(#248964),#249099,.T.); +#248964 = FACE_BOUND('',#248965,.F.); +#248965 = EDGE_LOOP('',(#248966,#248977,#248985,#248993,#249001,#249010, + #249018,#249026,#249035,#249043,#249051,#249060,#249068,#249076, + #249085,#249093)); +#248966 = ORIENTED_EDGE('',*,*,#248967,.T.); +#248967 = EDGE_CURVE('',#248968,#248970,#248972,.T.); +#248968 = VERTEX_POINT('',#248969); +#248969 = CARTESIAN_POINT('',(207.160548,-46.241051,1.585)); +#248970 = VERTEX_POINT('',#248971); +#248971 = CARTESIAN_POINT('',(207.277682,-46.324018,1.585)); +#248972 = CIRCLE('',#248973,7.499955990671E-02); +#248973 = AXIS2_PLACEMENT_3D('',#248974,#248975,#248976); +#248974 = CARTESIAN_POINT('',(207.20653150095,-46.30030006435,1.585)); +#248975 = DIRECTION('',(0.,0.,-1.)); +#248976 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#248977 = ORIENTED_EDGE('',*,*,#248978,.T.); +#248978 = EDGE_CURVE('',#248970,#248979,#248981,.T.); +#248979 = VERTEX_POINT('',#248980); +#248980 = CARTESIAN_POINT('',(207.072493,-46.939585,1.585)); +#248981 = LINE('',#248982,#248983); +#248982 = CARTESIAN_POINT('',(207.277682,-46.324018,1.585)); +#248983 = VECTOR('',#248984,1.); +#248984 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#248985 = ORIENTED_EDGE('',*,*,#248986,.T.); +#248986 = EDGE_CURVE('',#248979,#248987,#248989,.T.); +#248987 = VERTEX_POINT('',#248988); +#248988 = CARTESIAN_POINT('',(207.369626,-46.939585,1.585)); +#248989 = LINE('',#248990,#248991); +#248990 = CARTESIAN_POINT('',(207.072493,-46.939585,1.585)); +#248991 = VECTOR('',#248992,1.); +#248992 = DIRECTION('',(1.,0.,0.)); +#248993 = ORIENTED_EDGE('',*,*,#248994,.T.); +#248994 = EDGE_CURVE('',#248987,#248995,#248997,.T.); +#248995 = VERTEX_POINT('',#248996); +#248996 = CARTESIAN_POINT('',(207.371067,-46.66662,1.585)); +#248997 = LINE('',#248998,#248999); +#248998 = CARTESIAN_POINT('',(207.369626,-46.939585,1.585)); +#248999 = VECTOR('',#249000,1.); +#249000 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#249001 = ORIENTED_EDGE('',*,*,#249002,.T.); +#249002 = EDGE_CURVE('',#248995,#249003,#249005,.T.); +#249003 = VERTEX_POINT('',#249004); +#249004 = CARTESIAN_POINT('',(207.519626,-46.681252,1.585)); +#249005 = CIRCLE('',#249006,7.500006711463E-02); +#249006 = AXIS2_PLACEMENT_3D('',#249007,#249008,#249009); +#249007 = CARTESIAN_POINT('',(207.44462593288,-46.68125193288,1.585)); +#249008 = DIRECTION('',(0.,0.,-1.)); +#249009 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#249010 = ORIENTED_EDGE('',*,*,#249011,.T.); +#249011 = EDGE_CURVE('',#249003,#249012,#249014,.T.); +#249012 = VERTEX_POINT('',#249013); +#249013 = CARTESIAN_POINT('',(207.519626,-46.939585,1.585)); +#249014 = LINE('',#249015,#249016); +#249015 = CARTESIAN_POINT('',(207.519626,-46.681252,1.585)); +#249016 = VECTOR('',#249017,1.); +#249017 = DIRECTION('',(0.,-1.,0.)); +#249018 = ORIENTED_EDGE('',*,*,#249019,.T.); +#249019 = EDGE_CURVE('',#249012,#249020,#249022,.T.); +#249020 = VERTEX_POINT('',#249021); +#249021 = CARTESIAN_POINT('',(207.602115,-46.941026,1.585)); +#249022 = LINE('',#249023,#249024); +#249023 = CARTESIAN_POINT('',(207.519626,-46.939585,1.585)); +#249024 = VECTOR('',#249025,1.); +#249025 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#249026 = ORIENTED_EDGE('',*,*,#249027,.T.); +#249027 = EDGE_CURVE('',#249020,#249028,#249030,.T.); +#249028 = VERTEX_POINT('',#249029); +#249029 = CARTESIAN_POINT('',(207.587483,-47.089585,1.585)); +#249030 = CIRCLE('',#249031,7.500006711465E-02); +#249031 = AXIS2_PLACEMENT_3D('',#249032,#249033,#249034); +#249032 = CARTESIAN_POINT('',(207.58748306711,-47.01458493288,1.585)); +#249033 = DIRECTION('',(0.,0.,-1.)); +#249034 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#249035 = ORIENTED_EDGE('',*,*,#249036,.T.); +#249036 = EDGE_CURVE('',#249028,#249037,#249039,.T.); +#249037 = VERTEX_POINT('',#249038); +#249038 = CARTESIAN_POINT('',(207.519626,-47.089585,1.585)); +#249039 = LINE('',#249040,#249041); +#249040 = CARTESIAN_POINT('',(207.587483,-47.089585,1.585)); +#249041 = VECTOR('',#249042,1.); +#249042 = DIRECTION('',(-1.,0.,0.)); +#249043 = ORIENTED_EDGE('',*,*,#249044,.T.); +#249044 = EDGE_CURVE('',#249037,#249045,#249047,.T.); +#249045 = VERTEX_POINT('',#249046); +#249046 = CARTESIAN_POINT('',(207.518185,-47.362551,1.585)); +#249047 = LINE('',#249048,#249049); +#249048 = CARTESIAN_POINT('',(207.519626,-47.089585,1.585)); +#249049 = VECTOR('',#249050,1.); +#249050 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#249051 = ORIENTED_EDGE('',*,*,#249052,.T.); +#249052 = EDGE_CURVE('',#249045,#249053,#249055,.T.); +#249053 = VERTEX_POINT('',#249054); +#249054 = CARTESIAN_POINT('',(207.369626,-47.347919,1.585)); +#249055 = CIRCLE('',#249056,7.500006711463E-02); +#249056 = AXIS2_PLACEMENT_3D('',#249057,#249058,#249059); +#249057 = CARTESIAN_POINT('',(207.44462606711,-47.34791906711,1.585)); +#249058 = DIRECTION('',(-0.,0.,-1.)); +#249059 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#249060 = ORIENTED_EDGE('',*,*,#249061,.T.); +#249061 = EDGE_CURVE('',#249053,#249062,#249064,.T.); +#249062 = VERTEX_POINT('',#249063); +#249063 = CARTESIAN_POINT('',(207.369626,-47.089585,1.585)); +#249064 = LINE('',#249065,#249066); +#249065 = CARTESIAN_POINT('',(207.369626,-47.347919,1.585)); +#249066 = VECTOR('',#249067,1.); +#249067 = DIRECTION('',(0.,1.,0.)); +#249068 = ORIENTED_EDGE('',*,*,#249069,.T.); +#249069 = EDGE_CURVE('',#249062,#249070,#249072,.T.); +#249070 = VERTEX_POINT('',#249071); +#249071 = CARTESIAN_POINT('',(206.953804,-47.088144,1.585)); +#249072 = LINE('',#249073,#249074); +#249073 = CARTESIAN_POINT('',(207.369626,-47.089585,1.585)); +#249074 = VECTOR('',#249075,1.); +#249075 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#249076 = ORIENTED_EDGE('',*,*,#249077,.T.); +#249077 = EDGE_CURVE('',#249070,#249078,#249080,.T.); +#249078 = VERTEX_POINT('',#249079); +#249079 = CARTESIAN_POINT('',(206.897285,-46.990868,1.585)); +#249080 = CIRCLE('',#249081,7.499997045037E-02); +#249081 = AXIS2_PLACEMENT_3D('',#249082,#249083,#249084); +#249082 = CARTESIAN_POINT('',(206.96843617257,-47.01458521335,1.585)); +#249083 = DIRECTION('',(0.,0.,-1.)); +#249084 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#249085 = ORIENTED_EDGE('',*,*,#249086,.T.); +#249086 = EDGE_CURVE('',#249078,#249087,#249089,.T.); +#249087 = VERTEX_POINT('',#249088); +#249088 = CARTESIAN_POINT('',(207.141374,-46.263158,1.585)); +#249089 = LINE('',#249090,#249091); +#249090 = CARTESIAN_POINT('',(206.897285,-46.990868,1.585)); +#249091 = VECTOR('',#249092,1.); +#249092 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#249093 = ORIENTED_EDGE('',*,*,#249094,.T.); +#249094 = EDGE_CURVE('',#249087,#248968,#249095,.T.); +#249095 = LINE('',#249096,#249097); +#249096 = CARTESIAN_POINT('',(207.141374,-46.263158,1.585)); +#249097 = VECTOR('',#249098,1.); +#249098 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#249099 = PLANE('',#249100); +#249100 = AXIS2_PLACEMENT_3D('',#249101,#249102,#249103); +#249101 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249102 = DIRECTION('',(0.,0.,1.)); +#249103 = DIRECTION('',(1.,0.,-0.)); +#249104 = SHELL_BASED_SURFACE_MODEL('',(#249105)); +#249105 = OPEN_SHELL('',(#249106)); +#249106 = ADVANCED_FACE('',(#249107),#249337,.T.); +#249107 = FACE_BOUND('',#249108,.F.); +#249108 = EDGE_LOOP('',(#249109,#249120,#249128,#249136,#249144,#249152, + #249160,#249168,#249177,#249185,#249193,#249201,#249209,#249217, + #249225,#249233,#249241,#249249,#249257,#249265,#249273,#249281, + #249289,#249297,#249306,#249314,#249323,#249331)); +#249109 = ORIENTED_EDGE('',*,*,#249110,.T.); +#249110 = EDGE_CURVE('',#249111,#249113,#249115,.T.); +#249111 = VERTEX_POINT('',#249112); +#249112 = CARTESIAN_POINT('',(176.987465,-46.484243,1.585)); +#249113 = VERTEX_POINT('',#249114); +#249114 = CARTESIAN_POINT('',(177.235646,-46.240017,1.585)); +#249115 = CIRCLE('',#249116,0.3486213829); +#249116 = AXIS2_PLACEMENT_3D('',#249117,#249118,#249119); +#249117 = CARTESIAN_POINT('',(177.32340622951,-46.57741144383,1.585)); +#249118 = DIRECTION('',(0.,0.,-1.)); +#249119 = DIRECTION('',(-0.963627723352,0.267248219429,0.)); +#249120 = ORIENTED_EDGE('',*,*,#249121,.T.); +#249121 = EDGE_CURVE('',#249113,#249122,#249124,.T.); +#249122 = VERTEX_POINT('',#249123); +#249123 = CARTESIAN_POINT('',(177.411726,-46.240017,1.585)); +#249124 = LINE('',#249125,#249126); +#249125 = CARTESIAN_POINT('',(177.235646,-46.240017,1.585)); +#249126 = VECTOR('',#249127,1.); +#249127 = DIRECTION('',(1.,0.,0.)); +#249128 = ORIENTED_EDGE('',*,*,#249129,.T.); +#249129 = EDGE_CURVE('',#249122,#249130,#249132,.T.); +#249130 = VERTEX_POINT('',#249131); +#249131 = CARTESIAN_POINT('',(177.398132,-46.272836,1.585)); +#249132 = LINE('',#249133,#249134); +#249133 = CARTESIAN_POINT('',(177.411726,-46.240017,1.585)); +#249134 = VECTOR('',#249135,1.); +#249135 = DIRECTION('',(-0.382681632568,-0.92388027801,0.)); +#249136 = ORIENTED_EDGE('',*,*,#249137,.T.); +#249137 = EDGE_CURVE('',#249130,#249138,#249140,.T.); +#249138 = VERTEX_POINT('',#249139); +#249139 = CARTESIAN_POINT('',(177.398132,-46.331364,1.585)); +#249140 = LINE('',#249141,#249142); +#249141 = CARTESIAN_POINT('',(177.398132,-46.272836,1.585)); +#249142 = VECTOR('',#249143,1.); +#249143 = DIRECTION('',(0.,-1.,0.)); +#249144 = ORIENTED_EDGE('',*,*,#249145,.T.); +#249145 = EDGE_CURVE('',#249138,#249146,#249148,.T.); +#249146 = VERTEX_POINT('',#249147); +#249147 = CARTESIAN_POINT('',(177.42053,-46.385436,1.585)); +#249148 = LINE('',#249149,#249150); +#249149 = CARTESIAN_POINT('',(177.398132,-46.331364,1.585)); +#249150 = VECTOR('',#249151,1.); +#249151 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#249152 = ORIENTED_EDGE('',*,*,#249153,.T.); +#249153 = EDGE_CURVE('',#249146,#249154,#249156,.T.); +#249154 = VERTEX_POINT('',#249155); +#249155 = CARTESIAN_POINT('',(177.42367,-46.388576,1.585)); +#249156 = LINE('',#249157,#249158); +#249157 = CARTESIAN_POINT('',(177.42053,-46.385436,1.585)); +#249158 = VECTOR('',#249159,1.); +#249159 = DIRECTION('',(0.707106781183,-0.70710678119,0.)); +#249160 = ORIENTED_EDGE('',*,*,#249161,.T.); +#249161 = EDGE_CURVE('',#249154,#249162,#249164,.T.); +#249162 = VERTEX_POINT('',#249163); +#249163 = CARTESIAN_POINT('',(177.267983,-46.388576,1.585)); +#249164 = LINE('',#249165,#249166); +#249165 = CARTESIAN_POINT('',(177.42367,-46.388576,1.585)); +#249166 = VECTOR('',#249167,1.); +#249167 = DIRECTION('',(-1.,0.,0.)); +#249168 = ORIENTED_EDGE('',*,*,#249169,.T.); +#249169 = EDGE_CURVE('',#249162,#249170,#249172,.T.); +#249170 = VERTEX_POINT('',#249171); +#249171 = CARTESIAN_POINT('',(177.134802,-46.521757,1.585)); +#249172 = CIRCLE('',#249173,0.18686440374); +#249173 = AXIS2_PLACEMENT_3D('',#249174,#249175,#249176); +#249174 = CARTESIAN_POINT('',(177.315519,-46.569293,1.585)); +#249175 = DIRECTION('',(0.,0.,1.)); +#249176 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#249177 = ORIENTED_EDGE('',*,*,#249178,.T.); +#249178 = EDGE_CURVE('',#249170,#249179,#249181,.T.); +#249179 = VERTEX_POINT('',#249180); +#249180 = CARTESIAN_POINT('',(177.134802,-46.676823,1.585)); +#249181 = LINE('',#249182,#249183); +#249182 = CARTESIAN_POINT('',(177.134802,-46.521757,1.585)); +#249183 = VECTOR('',#249184,1.); +#249184 = DIRECTION('',(0.,-1.,0.)); +#249185 = ORIENTED_EDGE('',*,*,#249186,.T.); +#249186 = EDGE_CURVE('',#249179,#249187,#249189,.T.); +#249187 = VERTEX_POINT('',#249188); +#249188 = CARTESIAN_POINT('',(177.153773,-46.714766,1.585)); +#249189 = LINE('',#249190,#249191); +#249190 = CARTESIAN_POINT('',(177.134802,-46.676823,1.585)); +#249191 = VECTOR('',#249192,1.); +#249192 = DIRECTION('',(0.447204166258,-0.894431905559,0.)); +#249193 = ORIENTED_EDGE('',*,*,#249194,.T.); +#249194 = EDGE_CURVE('',#249187,#249195,#249197,.T.); +#249195 = VERTEX_POINT('',#249196); +#249196 = CARTESIAN_POINT('',(177.632498,-46.714766,1.585)); +#249197 = LINE('',#249198,#249199); +#249198 = CARTESIAN_POINT('',(177.153773,-46.714766,1.585)); +#249199 = VECTOR('',#249200,1.); +#249200 = DIRECTION('',(1.,0.,0.)); +#249201 = ORIENTED_EDGE('',*,*,#249202,.T.); +#249202 = EDGE_CURVE('',#249195,#249203,#249205,.T.); +#249203 = VERTEX_POINT('',#249204); +#249204 = CARTESIAN_POINT('',(177.651469,-46.676823,1.585)); +#249205 = LINE('',#249206,#249207); +#249206 = CARTESIAN_POINT('',(177.632498,-46.714766,1.585)); +#249207 = VECTOR('',#249208,1.); +#249208 = DIRECTION('',(0.447204166258,0.894431905559,0.)); +#249209 = ORIENTED_EDGE('',*,*,#249210,.T.); +#249210 = EDGE_CURVE('',#249203,#249211,#249213,.T.); +#249211 = VERTEX_POINT('',#249212); +#249212 = CARTESIAN_POINT('',(177.651469,-46.521757,1.585)); +#249213 = LINE('',#249214,#249215); +#249214 = CARTESIAN_POINT('',(177.651469,-46.676823,1.585)); +#249215 = VECTOR('',#249216,1.); +#249216 = DIRECTION('',(0.,1.,0.)); +#249217 = ORIENTED_EDGE('',*,*,#249218,.T.); +#249218 = EDGE_CURVE('',#249211,#249219,#249221,.T.); +#249219 = VERTEX_POINT('',#249220); +#249220 = CARTESIAN_POINT('',(177.617211,-46.453241,1.585)); +#249221 = LINE('',#249222,#249223); +#249222 = CARTESIAN_POINT('',(177.651469,-46.521757,1.585)); +#249223 = VECTOR('',#249224,1.); +#249224 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#249225 = ORIENTED_EDGE('',*,*,#249226,.T.); +#249226 = EDGE_CURVE('',#249219,#249227,#249229,.T.); +#249227 = VERTEX_POINT('',#249228); +#249228 = CARTESIAN_POINT('',(177.60186,-46.43789,1.585)); +#249229 = LINE('',#249230,#249231); +#249230 = CARTESIAN_POINT('',(177.617211,-46.453241,1.585)); +#249231 = VECTOR('',#249232,1.); +#249232 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#249233 = ORIENTED_EDGE('',*,*,#249234,.T.); +#249234 = EDGE_CURVE('',#249227,#249235,#249237,.T.); +#249235 = VERTEX_POINT('',#249236); +#249236 = CARTESIAN_POINT('',(177.628586,-46.42682,1.585)); +#249237 = LINE('',#249238,#249239); +#249238 = CARTESIAN_POINT('',(177.60186,-46.43789,1.585)); +#249239 = VECTOR('',#249240,1.); +#249240 = DIRECTION('',(0.92388285277,0.382675416454,0.)); +#249241 = ORIENTED_EDGE('',*,*,#249242,.T.); +#249242 = EDGE_CURVE('',#249235,#249243,#249245,.T.); +#249243 = VERTEX_POINT('',#249244); +#249244 = CARTESIAN_POINT('',(177.66997,-46.385436,1.585)); +#249245 = LINE('',#249246,#249247); +#249246 = CARTESIAN_POINT('',(177.628586,-46.42682,1.585)); +#249247 = VECTOR('',#249248,1.); +#249248 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#249249 = ORIENTED_EDGE('',*,*,#249250,.T.); +#249250 = EDGE_CURVE('',#249243,#249251,#249253,.T.); +#249251 = VERTEX_POINT('',#249252); +#249252 = CARTESIAN_POINT('',(177.692368,-46.331364,1.585)); +#249253 = LINE('',#249254,#249255); +#249254 = CARTESIAN_POINT('',(177.66997,-46.385436,1.585)); +#249255 = VECTOR('',#249256,1.); +#249256 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249257 = ORIENTED_EDGE('',*,*,#249258,.T.); +#249258 = EDGE_CURVE('',#249251,#249259,#249261,.T.); +#249259 = VERTEX_POINT('',#249260); +#249260 = CARTESIAN_POINT('',(177.692368,-46.317751,1.585)); +#249261 = LINE('',#249262,#249263); +#249262 = CARTESIAN_POINT('',(177.692368,-46.331364,1.585)); +#249263 = VECTOR('',#249264,1.); +#249264 = DIRECTION('',(0.,1.,0.)); +#249265 = ORIENTED_EDGE('',*,*,#249266,.T.); +#249266 = EDGE_CURVE('',#249259,#249267,#249269,.T.); +#249267 = VERTEX_POINT('',#249268); +#249268 = CARTESIAN_POINT('',(177.741967,-46.368973,1.585)); +#249269 = LINE('',#249270,#249271); +#249270 = CARTESIAN_POINT('',(177.692368,-46.317751,1.585)); +#249271 = VECTOR('',#249272,1.); +#249272 = DIRECTION('',(0.695633764102,-0.71839659398,0.)); +#249273 = ORIENTED_EDGE('',*,*,#249274,.T.); +#249274 = EDGE_CURVE('',#249267,#249275,#249277,.T.); +#249275 = VERTEX_POINT('',#249276); +#249276 = CARTESIAN_POINT('',(177.800028,-46.48942,1.585)); +#249277 = LINE('',#249278,#249279); +#249278 = CARTESIAN_POINT('',(177.741967,-46.368973,1.585)); +#249279 = VECTOR('',#249280,1.); +#249280 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#249281 = ORIENTED_EDGE('',*,*,#249282,.T.); +#249282 = EDGE_CURVE('',#249275,#249283,#249285,.T.); +#249283 = VERTEX_POINT('',#249284); +#249284 = CARTESIAN_POINT('',(177.798642,-46.714766,1.585)); +#249285 = LINE('',#249286,#249287); +#249286 = CARTESIAN_POINT('',(177.800028,-46.48942,1.585)); +#249287 = VECTOR('',#249288,1.); +#249288 = DIRECTION('',(-6.150425501802E-03,-0.999981085954,0.)); +#249289 = ORIENTED_EDGE('',*,*,#249290,.T.); +#249290 = EDGE_CURVE('',#249283,#249291,#249293,.T.); +#249291 = VERTEX_POINT('',#249292); +#249292 = CARTESIAN_POINT('',(178.074434,-46.716207,1.585)); +#249293 = LINE('',#249294,#249295); +#249294 = CARTESIAN_POINT('',(177.798642,-46.714766,1.585)); +#249295 = VECTOR('',#249296,1.); +#249296 = DIRECTION('',(0.999986350217,-5.22488081838E-03,0.)); +#249297 = ORIENTED_EDGE('',*,*,#249298,.T.); +#249298 = EDGE_CURVE('',#249291,#249299,#249301,.T.); +#249299 = VERTEX_POINT('',#249300); +#249300 = CARTESIAN_POINT('',(178.059802,-46.864766,1.585)); +#249301 = CIRCLE('',#249302,7.500006711464E-02); +#249302 = AXIS2_PLACEMENT_3D('',#249303,#249304,#249305); +#249303 = CARTESIAN_POINT('',(178.05980206711,-46.78976593288,1.585)); +#249304 = DIRECTION('',(0.,0.,-1.)); +#249305 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#249306 = ORIENTED_EDGE('',*,*,#249307,.T.); +#249307 = EDGE_CURVE('',#249299,#249308,#249310,.T.); +#249308 = VERTEX_POINT('',#249309); +#249309 = CARTESIAN_POINT('',(177.04517,-46.863325,1.585)); +#249310 = LINE('',#249311,#249312); +#249311 = CARTESIAN_POINT('',(178.059802,-46.864766,1.585)); +#249312 = VECTOR('',#249313,1.); +#249313 = DIRECTION('',(-0.99999899149,1.420217918158E-03,0.)); +#249314 = ORIENTED_EDGE('',*,*,#249315,.T.); +#249315 = EDGE_CURVE('',#249308,#249316,#249318,.T.); +#249316 = VERTEX_POINT('',#249317); +#249317 = CARTESIAN_POINT('',(177.00097,-46.744569,1.585)); +#249318 = CIRCLE('',#249319,7.424728667613E-02); +#249319 = AXIS2_PLACEMENT_3D('',#249320,#249321,#249322); +#249320 = CARTESIAN_POINT('',(177.05934915462,-46.79044419901,1.585)); +#249321 = DIRECTION('',(0.,0.,-1.)); +#249322 = DIRECTION('',(-0.19097202414,-0.981595479816,-0.)); +#249323 = ORIENTED_EDGE('',*,*,#249324,.T.); +#249324 = EDGE_CURVE('',#249316,#249325,#249327,.T.); +#249325 = VERTEX_POINT('',#249326); +#249326 = CARTESIAN_POINT('',(176.986243,-46.70916,1.585)); +#249327 = LINE('',#249328,#249329); +#249328 = CARTESIAN_POINT('',(177.00097,-46.744569,1.585)); +#249329 = VECTOR('',#249330,1.); +#249330 = DIRECTION('',(-0.384020957699,0.923324376396,0.)); +#249331 = ORIENTED_EDGE('',*,*,#249332,.T.); +#249332 = EDGE_CURVE('',#249325,#249111,#249333,.T.); +#249333 = LINE('',#249334,#249335); +#249334 = CARTESIAN_POINT('',(176.986243,-46.70916,1.585)); +#249335 = VECTOR('',#249336,1.); +#249336 = DIRECTION('',(5.433035139328E-03,0.999985240956,0.)); +#249337 = PLANE('',#249338); +#249338 = AXIS2_PLACEMENT_3D('',#249339,#249340,#249341); +#249339 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249340 = DIRECTION('',(0.,0.,1.)); +#249341 = DIRECTION('',(1.,0.,-0.)); +#249342 = SHELL_BASED_SURFACE_MODEL('',(#249343)); +#249343 = OPEN_SHELL('',(#249344)); +#249344 = ADVANCED_FACE('',(#249345),#249530,.T.); +#249345 = FACE_BOUND('',#249346,.F.); +#249346 = EDGE_LOOP('',(#249347,#249358,#249366,#249375,#249383,#249392, + #249400,#249408,#249416,#249425,#249433,#249442,#249450,#249459, + #249467,#249475,#249483,#249491,#249499,#249507,#249515,#249524)); +#249347 = ORIENTED_EDGE('',*,*,#249348,.T.); +#249348 = EDGE_CURVE('',#249349,#249351,#249353,.T.); +#249349 = VERTEX_POINT('',#249350); +#249350 = CARTESIAN_POINT('',(163.808389,-46.030497,1.585)); +#249351 = VERTEX_POINT('',#249352); +#249352 = CARTESIAN_POINT('',(163.90309,-46.14589,1.585)); +#249353 = CIRCLE('',#249354,7.500003178656E-02); +#249354 = AXIS2_PLACEMENT_3D('',#249355,#249356,#249357); +#249355 = CARTESIAN_POINT('',(163.8500565,-46.09285743787,1.585)); +#249356 = DIRECTION('',(0.,0.,-1.)); +#249357 = DIRECTION('',(-0.555566431206,0.831472152581,0.)); +#249358 = ORIENTED_EDGE('',*,*,#249359,.T.); +#249359 = EDGE_CURVE('',#249351,#249360,#249362,.T.); +#249360 = VERTEX_POINT('',#249361); +#249361 = CARTESIAN_POINT('',(163.86799,-46.180989,1.585)); +#249362 = LINE('',#249363,#249364); +#249363 = CARTESIAN_POINT('',(163.90309,-46.14589,1.585)); +#249364 = VECTOR('',#249365,1.); +#249365 = DIRECTION('',(-0.707116854005,-0.707096708225,0.)); +#249366 = ORIENTED_EDGE('',*,*,#249367,.T.); +#249367 = EDGE_CURVE('',#249360,#249368,#249370,.T.); +#249368 = VERTEX_POINT('',#249369); +#249369 = CARTESIAN_POINT('',(163.86799,-46.480914,1.585)); +#249370 = CIRCLE('',#249371,0.299310989749); +#249371 = AXIS2_PLACEMENT_3D('',#249372,#249373,#249374); +#249372 = CARTESIAN_POINT('',(164.12702342868,-46.3309515,1.585)); +#249373 = DIRECTION('',(0.,0.,1.)); +#249374 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#249375 = ORIENTED_EDGE('',*,*,#249376,.T.); +#249376 = EDGE_CURVE('',#249368,#249377,#249379,.T.); +#249377 = VERTEX_POINT('',#249378); +#249378 = CARTESIAN_POINT('',(163.942103,-46.555027,1.585)); +#249379 = LINE('',#249380,#249381); +#249380 = CARTESIAN_POINT('',(163.86799,-46.480914,1.585)); +#249381 = VECTOR('',#249382,1.); +#249382 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#249383 = ORIENTED_EDGE('',*,*,#249384,.T.); +#249384 = EDGE_CURVE('',#249377,#249385,#249387,.T.); +#249385 = VERTEX_POINT('',#249386); +#249386 = CARTESIAN_POINT('',(164.317013,-46.636904,1.585)); +#249387 = CIRCLE('',#249388,0.611738044646); +#249388 = AXIS2_PLACEMENT_3D('',#249389,#249390,#249391); +#249389 = CARTESIAN_POINT('',(164.25349337395,-46.02847266256,1.585)); +#249390 = DIRECTION('',(0.,0.,1.)); +#249391 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#249392 = ORIENTED_EDGE('',*,*,#249393,.T.); +#249393 = EDGE_CURVE('',#249385,#249394,#249396,.T.); +#249394 = VERTEX_POINT('',#249395); +#249395 = CARTESIAN_POINT('',(164.490547,-46.59352,1.585)); +#249396 = LINE('',#249397,#249398); +#249397 = CARTESIAN_POINT('',(164.317013,-46.636904,1.585)); +#249398 = VECTOR('',#249399,1.); +#249399 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#249400 = ORIENTED_EDGE('',*,*,#249401,.T.); +#249401 = EDGE_CURVE('',#249394,#249402,#249404,.T.); +#249402 = VERTEX_POINT('',#249403); +#249403 = CARTESIAN_POINT('',(164.567534,-46.555026,1.585)); +#249404 = LINE('',#249405,#249406); +#249405 = CARTESIAN_POINT('',(164.490547,-46.59352,1.585)); +#249406 = VECTOR('',#249407,1.); +#249407 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#249408 = ORIENTED_EDGE('',*,*,#249409,.T.); +#249409 = EDGE_CURVE('',#249402,#249410,#249412,.T.); +#249410 = VERTEX_POINT('',#249411); +#249411 = CARTESIAN_POINT('',(164.641648,-46.480913,1.585)); +#249412 = LINE('',#249413,#249414); +#249413 = CARTESIAN_POINT('',(164.567534,-46.555026,1.585)); +#249414 = VECTOR('',#249415,1.); +#249415 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#249416 = ORIENTED_EDGE('',*,*,#249417,.T.); +#249417 = EDGE_CURVE('',#249410,#249418,#249420,.T.); +#249418 = VERTEX_POINT('',#249419); +#249419 = CARTESIAN_POINT('',(164.641648,-46.18099,1.585)); +#249420 = CIRCLE('',#249421,0.299306284995); +#249421 = AXIS2_PLACEMENT_3D('',#249422,#249423,#249424); +#249422 = CARTESIAN_POINT('',(164.38261942868,-46.3309515,1.585)); +#249423 = DIRECTION('',(0.,-0.,1.)); +#249424 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#249425 = ORIENTED_EDGE('',*,*,#249426,.T.); +#249426 = EDGE_CURVE('',#249418,#249427,#249429,.T.); +#249427 = VERTEX_POINT('',#249428); +#249428 = CARTESIAN_POINT('',(164.59722,-46.134525,1.585)); +#249429 = LINE('',#249430,#249431); +#249430 = CARTESIAN_POINT('',(164.641648,-46.18099,1.585)); +#249431 = VECTOR('',#249432,1.); +#249432 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#249433 = ORIENTED_EDGE('',*,*,#249434,.T.); +#249434 = EDGE_CURVE('',#249427,#249435,#249437,.T.); +#249435 = VERTEX_POINT('',#249436); +#249436 = CARTESIAN_POINT('',(164.712612,-46.039823,1.585)); +#249437 = CIRCLE('',#249438,7.499993690527E-02); +#249438 = AXIS2_PLACEMENT_3D('',#249439,#249440,#249441); +#249439 = CARTESIAN_POINT('',(164.65957982375,-46.09285675169,1.585)); +#249440 = DIRECTION('',(0.,0.,-1.)); +#249441 = DIRECTION('',(-0.831465016204,-0.555577111505,-0.)); +#249442 = ORIENTED_EDGE('',*,*,#249443,.T.); +#249443 = EDGE_CURVE('',#249435,#249444,#249446,.T.); +#249444 = VERTEX_POINT('',#249445); +#249445 = CARTESIAN_POINT('',(164.772357,-46.103333,1.585)); +#249446 = LINE('',#249447,#249448); +#249447 = CARTESIAN_POINT('',(164.712612,-46.039823,1.585)); +#249448 = VECTOR('',#249449,1.); +#249449 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#249450 = ORIENTED_EDGE('',*,*,#249451,.T.); +#249451 = EDGE_CURVE('',#249444,#249452,#249454,.T.); +#249452 = VERTEX_POINT('',#249453); +#249453 = CARTESIAN_POINT('',(164.769561,-46.563096,1.585)); +#249454 = CIRCLE('',#249455,0.461068563462); +#249455 = AXIS2_PLACEMENT_3D('',#249456,#249457,#249458); +#249456 = CARTESIAN_POINT('',(164.37129557362,-46.33078398919,1.585)); +#249457 = DIRECTION('',(0.,0.,-1.)); +#249458 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#249459 = ORIENTED_EDGE('',*,*,#249460,.T.); +#249460 = EDGE_CURVE('',#249452,#249461,#249463,.T.); +#249461 = VERTEX_POINT('',#249462); +#249462 = CARTESIAN_POINT('',(164.651798,-46.679784,1.585)); +#249463 = LINE('',#249464,#249465); +#249464 = CARTESIAN_POINT('',(164.769561,-46.563096,1.585)); +#249465 = VECTOR('',#249466,1.); +#249466 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#249467 = ORIENTED_EDGE('',*,*,#249468,.T.); +#249468 = EDGE_CURVE('',#249461,#249469,#249471,.T.); +#249469 = VERTEX_POINT('',#249470); +#249470 = CARTESIAN_POINT('',(164.534913,-46.737046,1.585)); +#249471 = LINE('',#249472,#249473); +#249472 = CARTESIAN_POINT('',(164.651798,-46.679784,1.585)); +#249473 = VECTOR('',#249474,1.); +#249474 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#249475 = ORIENTED_EDGE('',*,*,#249476,.T.); +#249476 = EDGE_CURVE('',#249469,#249477,#249479,.T.); +#249477 = VERTEX_POINT('',#249478); +#249478 = CARTESIAN_POINT('',(164.326247,-46.786904,1.585)); +#249479 = LINE('',#249480,#249481); +#249480 = CARTESIAN_POINT('',(164.534913,-46.737046,1.585)); +#249481 = VECTOR('',#249482,1.); +#249482 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#249483 = ORIENTED_EDGE('',*,*,#249484,.T.); +#249484 = EDGE_CURVE('',#249477,#249485,#249487,.T.); +#249485 = VERTEX_POINT('',#249486); +#249486 = CARTESIAN_POINT('',(164.1652,-46.784665,1.585)); +#249487 = LINE('',#249488,#249489); +#249488 = CARTESIAN_POINT('',(164.326247,-46.786904,1.585)); +#249489 = VECTOR('',#249490,1.); +#249490 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#249491 = ORIENTED_EDGE('',*,*,#249492,.T.); +#249492 = EDGE_CURVE('',#249485,#249493,#249495,.T.); +#249493 = VERTEX_POINT('',#249494); +#249494 = CARTESIAN_POINT('',(163.959373,-46.731367,1.585)); +#249495 = LINE('',#249496,#249497); +#249496 = CARTESIAN_POINT('',(164.1652,-46.784665,1.585)); +#249497 = VECTOR('',#249498,1.); +#249498 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#249499 = ORIENTED_EDGE('',*,*,#249500,.T.); +#249500 = EDGE_CURVE('',#249493,#249501,#249503,.T.); +#249501 = VERTEX_POINT('',#249502); +#249502 = CARTESIAN_POINT('',(163.850393,-46.674419,1.585)); +#249503 = LINE('',#249504,#249505); +#249504 = CARTESIAN_POINT('',(163.959373,-46.731367,1.585)); +#249505 = VECTOR('',#249506,1.); +#249506 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#249507 = ORIENTED_EDGE('',*,*,#249508,.T.); +#249508 = EDGE_CURVE('',#249501,#249509,#249511,.T.); +#249509 = VERTEX_POINT('',#249510); +#249510 = CARTESIAN_POINT('',(163.737281,-46.55857,1.585)); +#249511 = LINE('',#249512,#249513); +#249512 = CARTESIAN_POINT('',(163.850393,-46.674419,1.585)); +#249513 = VECTOR('',#249514,1.); +#249514 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#249515 = ORIENTED_EDGE('',*,*,#249516,.T.); +#249516 = EDGE_CURVE('',#249509,#249517,#249519,.T.); +#249517 = VERTEX_POINT('',#249518); +#249518 = CARTESIAN_POINT('',(163.740078,-46.098808,1.585)); +#249519 = CIRCLE('',#249520,0.461058290907); +#249520 = AXIS2_PLACEMENT_3D('',#249521,#249522,#249523); +#249521 = CARTESIAN_POINT('',(164.13833135644,-46.33112031499,1.585)); +#249522 = DIRECTION('',(0.,0.,-1.)); +#249523 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#249524 = ORIENTED_EDGE('',*,*,#249525,.T.); +#249525 = EDGE_CURVE('',#249517,#249349,#249526,.T.); +#249526 = LINE('',#249527,#249528); +#249527 = CARTESIAN_POINT('',(163.740078,-46.098808,1.585)); +#249528 = VECTOR('',#249529,1.); +#249529 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#249530 = PLANE('',#249531); +#249531 = AXIS2_PLACEMENT_3D('',#249532,#249533,#249534); +#249532 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249533 = DIRECTION('',(0.,0.,1.)); +#249534 = DIRECTION('',(1.,0.,-0.)); +#249535 = SHELL_BASED_SURFACE_MODEL('',(#249536)); +#249536 = OPEN_SHELL('',(#249537)); +#249537 = ADVANCED_FACE('',(#249538),#249599,.T.); +#249538 = FACE_BOUND('',#249539,.F.); +#249539 = EDGE_LOOP('',(#249540,#249551,#249559,#249568,#249576,#249584, + #249593)); +#249540 = ORIENTED_EDGE('',*,*,#249541,.T.); +#249541 = EDGE_CURVE('',#249542,#249544,#249546,.T.); +#249542 = VERTEX_POINT('',#249543); +#249543 = CARTESIAN_POINT('',(109.75165,-44.9431,1.585)); +#249544 = VERTEX_POINT('',#249545); +#249545 = CARTESIAN_POINT('',(109.81165,-44.8831,1.585)); +#249546 = CIRCLE('',#249547,5.999932016262E-02); +#249547 = AXIS2_PLACEMENT_3D('',#249548,#249549,#249550); +#249548 = CARTESIAN_POINT('',(109.81164932015,-44.94309932015,1.585)); +#249549 = DIRECTION('',(0.,0.,-1.)); +#249550 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#249551 = ORIENTED_EDGE('',*,*,#249552,.T.); +#249552 = EDGE_CURVE('',#249544,#249553,#249555,.T.); +#249553 = VERTEX_POINT('',#249554); +#249554 = CARTESIAN_POINT('',(111.19165,-44.8831,1.585)); +#249555 = LINE('',#249556,#249557); +#249556 = CARTESIAN_POINT('',(109.81165,-44.8831,1.585)); +#249557 = VECTOR('',#249558,1.); +#249558 = DIRECTION('',(1.,0.,0.)); +#249559 = ORIENTED_EDGE('',*,*,#249560,.T.); +#249560 = EDGE_CURVE('',#249553,#249561,#249563,.T.); +#249561 = VERTEX_POINT('',#249562); +#249562 = CARTESIAN_POINT('',(111.19165,-45.0031,1.585)); +#249563 = CIRCLE('',#249564,6.000000000043E-02); +#249564 = AXIS2_PLACEMENT_3D('',#249565,#249566,#249567); +#249565 = CARTESIAN_POINT('',(111.19165022558,-44.9431,1.585)); +#249566 = DIRECTION('',(0.,0.,-1.)); +#249567 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#249568 = ORIENTED_EDGE('',*,*,#249569,.T.); +#249569 = EDGE_CURVE('',#249561,#249570,#249572,.T.); +#249570 = VERTEX_POINT('',#249571); +#249571 = CARTESIAN_POINT('',(109.87165,-45.0031,1.585)); +#249572 = LINE('',#249573,#249574); +#249573 = CARTESIAN_POINT('',(111.19165,-45.0031,1.585)); +#249574 = VECTOR('',#249575,1.); +#249575 = DIRECTION('',(-1.,0.,0.)); +#249576 = ORIENTED_EDGE('',*,*,#249577,.T.); +#249577 = EDGE_CURVE('',#249570,#249578,#249580,.T.); +#249578 = VERTEX_POINT('',#249579); +#249579 = CARTESIAN_POINT('',(109.87165,-46.3231,1.585)); +#249580 = LINE('',#249581,#249582); +#249581 = CARTESIAN_POINT('',(109.87165,-45.0031,1.585)); +#249582 = VECTOR('',#249583,1.); +#249583 = DIRECTION('',(0.,-1.,0.)); +#249584 = ORIENTED_EDGE('',*,*,#249585,.T.); +#249585 = EDGE_CURVE('',#249578,#249586,#249588,.T.); +#249586 = VERTEX_POINT('',#249587); +#249587 = CARTESIAN_POINT('',(109.75165,-46.3231,1.585)); +#249588 = CIRCLE('',#249589,6.000000000043E-02); +#249589 = AXIS2_PLACEMENT_3D('',#249590,#249591,#249592); +#249590 = CARTESIAN_POINT('',(109.81165,-46.32310022558,1.585)); +#249591 = DIRECTION('',(0.,0.,-1.)); +#249592 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#249593 = ORIENTED_EDGE('',*,*,#249594,.T.); +#249594 = EDGE_CURVE('',#249586,#249542,#249595,.T.); +#249595 = LINE('',#249596,#249597); +#249596 = CARTESIAN_POINT('',(109.75165,-46.3231,1.585)); +#249597 = VECTOR('',#249598,1.); +#249598 = DIRECTION('',(0.,1.,0.)); +#249599 = PLANE('',#249600); +#249600 = AXIS2_PLACEMENT_3D('',#249601,#249602,#249603); +#249601 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249602 = DIRECTION('',(0.,0.,1.)); +#249603 = DIRECTION('',(1.,0.,-0.)); +#249604 = SHELL_BASED_SURFACE_MODEL('',(#249605)); +#249605 = OPEN_SHELL('',(#249606)); +#249606 = ADVANCED_FACE('',(#249607),#249651,.T.); +#249607 = FACE_BOUND('',#249608,.F.); +#249608 = EDGE_LOOP('',(#249609,#249620,#249628,#249637,#249645)); +#249609 = ORIENTED_EDGE('',*,*,#249610,.T.); +#249610 = EDGE_CURVE('',#249611,#249613,#249615,.T.); +#249611 = VERTEX_POINT('',#249612); +#249612 = CARTESIAN_POINT('',(160.276217,-44.563887,1.585)); +#249613 = VERTEX_POINT('',#249614); +#249614 = CARTESIAN_POINT('',(160.39165,-44.586848,1.585)); +#249615 = CIRCLE('',#249616,6.000007318647E-02); +#249616 = AXIS2_PLACEMENT_3D('',#249617,#249618,#249619); +#249617 = CARTESIAN_POINT('',(160.33164992681,-44.58684782331,1.585)); +#249618 = DIRECTION('',(0.,0.,-1.)); +#249619 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#249620 = ORIENTED_EDGE('',*,*,#249621,.T.); +#249621 = EDGE_CURVE('',#249613,#249622,#249624,.T.); +#249622 = VERTEX_POINT('',#249623); +#249623 = CARTESIAN_POINT('',(160.39165,-46.009352,1.585)); +#249624 = LINE('',#249625,#249626); +#249625 = CARTESIAN_POINT('',(160.39165,-44.586848,1.585)); +#249626 = VECTOR('',#249627,1.); +#249627 = DIRECTION('',(0.,-1.,0.)); +#249628 = ORIENTED_EDGE('',*,*,#249629,.T.); +#249629 = EDGE_CURVE('',#249622,#249630,#249632,.T.); +#249630 = VERTEX_POINT('',#249631); +#249631 = CARTESIAN_POINT('',(160.27165,-46.009352,1.585)); +#249632 = CIRCLE('',#249633,6.000000000042E-02); +#249633 = AXIS2_PLACEMENT_3D('',#249634,#249635,#249636); +#249634 = CARTESIAN_POINT('',(160.33165,-46.00935222558,1.585)); +#249635 = DIRECTION('',(0.,0.,-1.)); +#249636 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#249637 = ORIENTED_EDGE('',*,*,#249638,.T.); +#249638 = EDGE_CURVE('',#249630,#249639,#249641,.T.); +#249639 = VERTEX_POINT('',#249640); +#249640 = CARTESIAN_POINT('',(160.27165,-44.586848,1.585)); +#249641 = LINE('',#249642,#249643); +#249642 = CARTESIAN_POINT('',(160.27165,-46.009352,1.585)); +#249643 = VECTOR('',#249644,1.); +#249644 = DIRECTION('',(0.,1.,0.)); +#249645 = ORIENTED_EDGE('',*,*,#249646,.T.); +#249646 = EDGE_CURVE('',#249639,#249611,#249647,.T.); +#249647 = LINE('',#249648,#249649); +#249648 = CARTESIAN_POINT('',(160.27165,-44.586848,1.585)); +#249649 = VECTOR('',#249650,1.); +#249650 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#249651 = PLANE('',#249652); +#249652 = AXIS2_PLACEMENT_3D('',#249653,#249654,#249655); +#249653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249654 = DIRECTION('',(0.,0.,1.)); +#249655 = DIRECTION('',(1.,0.,-0.)); +#249656 = SHELL_BASED_SURFACE_MODEL('',(#249657)); +#249657 = OPEN_SHELL('',(#249658)); +#249658 = ADVANCED_FACE('',(#249659),#249703,.T.); +#249659 = FACE_BOUND('',#249660,.F.); +#249660 = EDGE_LOOP('',(#249661,#249672,#249680,#249689,#249697)); +#249661 = ORIENTED_EDGE('',*,*,#249662,.T.); +#249662 = EDGE_CURVE('',#249663,#249665,#249667,.T.); +#249663 = VERTEX_POINT('',#249664); +#249664 = CARTESIAN_POINT('',(162.996217,-44.563887,1.585)); +#249665 = VERTEX_POINT('',#249666); +#249666 = CARTESIAN_POINT('',(163.11165,-44.586848,1.585)); +#249667 = CIRCLE('',#249668,6.000007318647E-02); +#249668 = AXIS2_PLACEMENT_3D('',#249669,#249670,#249671); +#249669 = CARTESIAN_POINT('',(163.05164992681,-44.58684782331,1.585)); +#249670 = DIRECTION('',(0.,0.,-1.)); +#249671 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#249672 = ORIENTED_EDGE('',*,*,#249673,.T.); +#249673 = EDGE_CURVE('',#249665,#249674,#249676,.T.); +#249674 = VERTEX_POINT('',#249675); +#249675 = CARTESIAN_POINT('',(163.11165,-46.009352,1.585)); +#249676 = LINE('',#249677,#249678); +#249677 = CARTESIAN_POINT('',(163.11165,-44.586848,1.585)); +#249678 = VECTOR('',#249679,1.); +#249679 = DIRECTION('',(0.,-1.,0.)); +#249680 = ORIENTED_EDGE('',*,*,#249681,.T.); +#249681 = EDGE_CURVE('',#249674,#249682,#249684,.T.); +#249682 = VERTEX_POINT('',#249683); +#249683 = CARTESIAN_POINT('',(162.99165,-46.009352,1.585)); +#249684 = CIRCLE('',#249685,6.000000000042E-02); +#249685 = AXIS2_PLACEMENT_3D('',#249686,#249687,#249688); +#249686 = CARTESIAN_POINT('',(163.05165,-46.00935222558,1.585)); +#249687 = DIRECTION('',(0.,0.,-1.)); +#249688 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#249689 = ORIENTED_EDGE('',*,*,#249690,.T.); +#249690 = EDGE_CURVE('',#249682,#249691,#249693,.T.); +#249691 = VERTEX_POINT('',#249692); +#249692 = CARTESIAN_POINT('',(162.99165,-44.586848,1.585)); +#249693 = LINE('',#249694,#249695); +#249694 = CARTESIAN_POINT('',(162.99165,-46.009352,1.585)); +#249695 = VECTOR('',#249696,1.); +#249696 = DIRECTION('',(0.,1.,0.)); +#249697 = ORIENTED_EDGE('',*,*,#249698,.T.); +#249698 = EDGE_CURVE('',#249691,#249663,#249699,.T.); +#249699 = LINE('',#249700,#249701); +#249700 = CARTESIAN_POINT('',(162.99165,-44.586848,1.585)); +#249701 = VECTOR('',#249702,1.); +#249702 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#249703 = PLANE('',#249704); +#249704 = AXIS2_PLACEMENT_3D('',#249705,#249706,#249707); +#249705 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249706 = DIRECTION('',(0.,0.,1.)); +#249707 = DIRECTION('',(1.,0.,-0.)); +#249708 = SHELL_BASED_SURFACE_MODEL('',(#249709)); +#249709 = OPEN_SHELL('',(#249710)); +#249710 = ADVANCED_FACE('',(#249711),#249747,.T.); +#249711 = FACE_BOUND('',#249712,.F.); +#249712 = EDGE_LOOP('',(#249713,#249724,#249732,#249741)); +#249713 = ORIENTED_EDGE('',*,*,#249714,.T.); +#249714 = EDGE_CURVE('',#249715,#249717,#249719,.T.); +#249715 = VERTEX_POINT('',#249716); +#249716 = CARTESIAN_POINT('',(173.629392,-45.9056,1.585)); +#249717 = VERTEX_POINT('',#249718); +#249718 = CARTESIAN_POINT('',(173.629392,-45.7856,1.585)); +#249719 = CIRCLE('',#249720,6.000000000042E-02); +#249720 = AXIS2_PLACEMENT_3D('',#249721,#249722,#249723); +#249721 = CARTESIAN_POINT('',(173.62939177441,-45.8456,1.585)); +#249722 = DIRECTION('',(0.,0.,-1.)); +#249723 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#249724 = ORIENTED_EDGE('',*,*,#249725,.T.); +#249725 = EDGE_CURVE('',#249717,#249726,#249728,.T.); +#249726 = VERTEX_POINT('',#249727); +#249727 = CARTESIAN_POINT('',(174.103908,-45.7856,1.585)); +#249728 = LINE('',#249729,#249730); +#249729 = CARTESIAN_POINT('',(173.629392,-45.7856,1.585)); +#249730 = VECTOR('',#249731,1.); +#249731 = DIRECTION('',(1.,0.,0.)); +#249732 = ORIENTED_EDGE('',*,*,#249733,.T.); +#249733 = EDGE_CURVE('',#249726,#249734,#249736,.T.); +#249734 = VERTEX_POINT('',#249735); +#249735 = CARTESIAN_POINT('',(174.103908,-45.9056,1.585)); +#249736 = CIRCLE('',#249737,6.000000000043E-02); +#249737 = AXIS2_PLACEMENT_3D('',#249738,#249739,#249740); +#249738 = CARTESIAN_POINT('',(174.10390822558,-45.8456,1.585)); +#249739 = DIRECTION('',(0.,0.,-1.)); +#249740 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#249741 = ORIENTED_EDGE('',*,*,#249742,.T.); +#249742 = EDGE_CURVE('',#249734,#249715,#249743,.T.); +#249743 = LINE('',#249744,#249745); +#249744 = CARTESIAN_POINT('',(174.103908,-45.9056,1.585)); +#249745 = VECTOR('',#249746,1.); +#249746 = DIRECTION('',(-1.,0.,0.)); +#249747 = PLANE('',#249748); +#249748 = AXIS2_PLACEMENT_3D('',#249749,#249750,#249751); +#249749 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249750 = DIRECTION('',(0.,0.,1.)); +#249751 = DIRECTION('',(1.,0.,-0.)); +#249752 = SHELL_BASED_SURFACE_MODEL('',(#249753)); +#249753 = OPEN_SHELL('',(#249754)); +#249754 = ADVANCED_FACE('',(#249755),#249791,.T.); +#249755 = FACE_BOUND('',#249756,.F.); +#249756 = EDGE_LOOP('',(#249757,#249768,#249776,#249785)); +#249757 = ORIENTED_EDGE('',*,*,#249758,.T.); +#249758 = EDGE_CURVE('',#249759,#249761,#249763,.T.); +#249759 = VERTEX_POINT('',#249760); +#249760 = CARTESIAN_POINT('',(176.854392,-45.9056,1.585)); +#249761 = VERTEX_POINT('',#249762); +#249762 = CARTESIAN_POINT('',(176.854392,-45.7856,1.585)); +#249763 = CIRCLE('',#249764,6.000000000042E-02); +#249764 = AXIS2_PLACEMENT_3D('',#249765,#249766,#249767); +#249765 = CARTESIAN_POINT('',(176.85439177441,-45.8456,1.585)); +#249766 = DIRECTION('',(0.,0.,-1.)); +#249767 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#249768 = ORIENTED_EDGE('',*,*,#249769,.T.); +#249769 = EDGE_CURVE('',#249761,#249770,#249772,.T.); +#249770 = VERTEX_POINT('',#249771); +#249771 = CARTESIAN_POINT('',(177.328908,-45.7856,1.585)); +#249772 = LINE('',#249773,#249774); +#249773 = CARTESIAN_POINT('',(176.854392,-45.7856,1.585)); +#249774 = VECTOR('',#249775,1.); +#249775 = DIRECTION('',(1.,0.,0.)); +#249776 = ORIENTED_EDGE('',*,*,#249777,.T.); +#249777 = EDGE_CURVE('',#249770,#249778,#249780,.T.); +#249778 = VERTEX_POINT('',#249779); +#249779 = CARTESIAN_POINT('',(177.328908,-45.9056,1.585)); +#249780 = CIRCLE('',#249781,6.000000000043E-02); +#249781 = AXIS2_PLACEMENT_3D('',#249782,#249783,#249784); +#249782 = CARTESIAN_POINT('',(177.32890822558,-45.8456,1.585)); +#249783 = DIRECTION('',(0.,0.,-1.)); +#249784 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#249785 = ORIENTED_EDGE('',*,*,#249786,.T.); +#249786 = EDGE_CURVE('',#249778,#249759,#249787,.T.); +#249787 = LINE('',#249788,#249789); +#249788 = CARTESIAN_POINT('',(177.328908,-45.9056,1.585)); +#249789 = VECTOR('',#249790,1.); +#249790 = DIRECTION('',(-1.,0.,0.)); +#249791 = PLANE('',#249792); +#249792 = AXIS2_PLACEMENT_3D('',#249793,#249794,#249795); +#249793 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249794 = DIRECTION('',(0.,0.,1.)); +#249795 = DIRECTION('',(1.,0.,-0.)); +#249796 = SHELL_BASED_SURFACE_MODEL('',(#249797)); +#249797 = OPEN_SHELL('',(#249798)); +#249798 = ADVANCED_FACE('',(#249799),#249835,.T.); +#249799 = FACE_BOUND('',#249800,.F.); +#249800 = EDGE_LOOP('',(#249801,#249812,#249820,#249829)); +#249801 = ORIENTED_EDGE('',*,*,#249802,.T.); +#249802 = EDGE_CURVE('',#249803,#249805,#249807,.T.); +#249803 = VERTEX_POINT('',#249804); +#249804 = CARTESIAN_POINT('',(168.27607,-45.8931,1.585)); +#249805 = VERTEX_POINT('',#249806); +#249806 = CARTESIAN_POINT('',(168.27607,-45.7731,1.585)); +#249807 = CIRCLE('',#249808,6.000000000042E-02); +#249808 = AXIS2_PLACEMENT_3D('',#249809,#249810,#249811); +#249809 = CARTESIAN_POINT('',(168.27606977441,-45.8331,1.585)); +#249810 = DIRECTION('',(0.,0.,-1.)); +#249811 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#249812 = ORIENTED_EDGE('',*,*,#249813,.T.); +#249813 = EDGE_CURVE('',#249805,#249814,#249816,.T.); +#249814 = VERTEX_POINT('',#249815); +#249815 = CARTESIAN_POINT('',(168.55723,-45.7731,1.585)); +#249816 = LINE('',#249817,#249818); +#249817 = CARTESIAN_POINT('',(168.27607,-45.7731,1.585)); +#249818 = VECTOR('',#249819,1.); +#249819 = DIRECTION('',(1.,0.,0.)); +#249820 = ORIENTED_EDGE('',*,*,#249821,.T.); +#249821 = EDGE_CURVE('',#249814,#249822,#249824,.T.); +#249822 = VERTEX_POINT('',#249823); +#249823 = CARTESIAN_POINT('',(168.55723,-45.8931,1.585)); +#249824 = CIRCLE('',#249825,6.000000000043E-02); +#249825 = AXIS2_PLACEMENT_3D('',#249826,#249827,#249828); +#249826 = CARTESIAN_POINT('',(168.55723022558,-45.8331,1.585)); +#249827 = DIRECTION('',(0.,0.,-1.)); +#249828 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#249829 = ORIENTED_EDGE('',*,*,#249830,.T.); +#249830 = EDGE_CURVE('',#249822,#249803,#249831,.T.); +#249831 = LINE('',#249832,#249833); +#249832 = CARTESIAN_POINT('',(168.55723,-45.8931,1.585)); +#249833 = VECTOR('',#249834,1.); +#249834 = DIRECTION('',(-1.,0.,0.)); +#249835 = PLANE('',#249836); +#249836 = AXIS2_PLACEMENT_3D('',#249837,#249838,#249839); +#249837 = CARTESIAN_POINT('',(0.,0.,1.585)); +#249838 = DIRECTION('',(0.,0.,1.)); +#249839 = DIRECTION('',(1.,0.,-0.)); +#249840 = SHELL_BASED_SURFACE_MODEL('',(#249841)); +#249841 = OPEN_SHELL('',(#249842)); +#249842 = ADVANCED_FACE('',(#249843),#250018,.T.); +#249843 = FACE_BOUND('',#249844,.F.); +#249844 = EDGE_LOOP('',(#249845,#249855,#249863,#249871,#249879,#249887, + #249896,#249904,#249913,#249921,#249929,#249937,#249945,#249953, + #249962,#249970,#249978,#249986,#249995,#250003,#250012)); +#249845 = ORIENTED_EDGE('',*,*,#249846,.T.); +#249846 = EDGE_CURVE('',#249847,#249849,#249851,.T.); +#249847 = VERTEX_POINT('',#249848); +#249848 = CARTESIAN_POINT('',(163.810216,-45.124977,1.585)); +#249849 = VERTEX_POINT('',#249850); +#249850 = CARTESIAN_POINT('',(163.930663,-45.066917,1.585)); +#249851 = LINE('',#249852,#249853); +#249852 = CARTESIAN_POINT('',(163.810216,-45.124977,1.585)); +#249853 = VECTOR('',#249854,1.); +#249854 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#249855 = ORIENTED_EDGE('',*,*,#249856,.T.); +#249856 = EDGE_CURVE('',#249849,#249857,#249859,.T.); +#249857 = VERTEX_POINT('',#249858); +#249858 = CARTESIAN_POINT('',(164.047938,-45.066205,1.585)); +#249859 = LINE('',#249860,#249861); +#249860 = CARTESIAN_POINT('',(163.930663,-45.066917,1.585)); +#249861 = VECTOR('',#249862,1.); +#249862 = DIRECTION('',(0.999981570774,6.071088283019E-03,0.)); +#249863 = ORIENTED_EDGE('',*,*,#249864,.T.); +#249864 = EDGE_CURVE('',#249857,#249865,#249867,.T.); +#249865 = VERTEX_POINT('',#249866); +#249866 = CARTESIAN_POINT('',(164.225058,-45.125735,1.585)); +#249867 = LINE('',#249868,#249869); +#249868 = CARTESIAN_POINT('',(164.047938,-45.066205,1.585)); +#249869 = VECTOR('',#249870,1.); +#249870 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#249871 = ORIENTED_EDGE('',*,*,#249872,.T.); +#249872 = EDGE_CURVE('',#249865,#249873,#249875,.T.); +#249873 = VERTEX_POINT('',#249874); +#249874 = CARTESIAN_POINT('',(164.679819,-45.578457,1.585)); +#249875 = LINE('',#249876,#249877); +#249876 = CARTESIAN_POINT('',(164.225058,-45.125735,1.585)); +#249877 = VECTOR('',#249878,1.); +#249878 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#249879 = ORIENTED_EDGE('',*,*,#249880,.T.); +#249880 = EDGE_CURVE('',#249873,#249881,#249883,.T.); +#249881 = VERTEX_POINT('',#249882); +#249882 = CARTESIAN_POINT('',(164.68126,-45.125844,1.585)); +#249883 = LINE('',#249884,#249885); +#249884 = CARTESIAN_POINT('',(164.679819,-45.578457,1.585)); +#249885 = VECTOR('',#249886,1.); +#249886 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#249887 = ORIENTED_EDGE('',*,*,#249888,.T.); +#249888 = EDGE_CURVE('',#249881,#249889,#249891,.T.); +#249889 = VERTEX_POINT('',#249890); +#249890 = CARTESIAN_POINT('',(164.829819,-45.140476,1.585)); +#249891 = CIRCLE('',#249892,7.500006711463E-02); +#249892 = AXIS2_PLACEMENT_3D('',#249893,#249894,#249895); +#249893 = CARTESIAN_POINT('',(164.75481893288,-45.14047593288,1.585)); +#249894 = DIRECTION('',(0.,0.,-1.)); +#249895 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#249896 = ORIENTED_EDGE('',*,*,#249897,.T.); +#249897 = EDGE_CURVE('',#249889,#249898,#249900,.T.); +#249898 = VERTEX_POINT('',#249899); +#249899 = CARTESIAN_POINT('',(164.828378,-45.774155,1.585)); +#249900 = LINE('',#249901,#249902); +#249901 = CARTESIAN_POINT('',(164.829819,-45.140476,1.585)); +#249902 = VECTOR('',#249903,1.); +#249903 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#249904 = ORIENTED_EDGE('',*,*,#249905,.T.); +#249905 = EDGE_CURVE('',#249898,#249906,#249908,.T.); +#249906 = VERTEX_POINT('',#249907); +#249907 = CARTESIAN_POINT('',(164.769451,-45.833082,1.585)); +#249908 = CIRCLE('',#249909,7.499663284005E-02); +#249909 = AXIS2_PLACEMENT_3D('',#249910,#249911,#249912); +#249910 = CARTESIAN_POINT('',(164.75482198775,-45.75952598775,1.585)); +#249911 = DIRECTION('',(0.,0.,-1.)); +#249912 = DIRECTION('',(0.980790863049,-0.195062254063,0.)); +#249913 = ORIENTED_EDGE('',*,*,#249914,.T.); +#249914 = EDGE_CURVE('',#249906,#249915,#249917,.T.); +#249915 = VERTEX_POINT('',#249916); +#249916 = CARTESIAN_POINT('',(164.732268,-45.829802,1.585)); +#249917 = LINE('',#249918,#249919); +#249918 = CARTESIAN_POINT('',(164.769451,-45.833082,1.585)); +#249919 = VECTOR('',#249920,1.); +#249920 = DIRECTION('',(-0.996131850393,8.787113652164E-02,0.)); +#249921 = ORIENTED_EDGE('',*,*,#249922,.T.); +#249922 = EDGE_CURVE('',#249915,#249923,#249925,.T.); +#249923 = VERTEX_POINT('',#249924); +#249924 = CARTESIAN_POINT('',(164.701786,-45.812556,1.585)); +#249925 = LINE('',#249926,#249927); +#249926 = CARTESIAN_POINT('',(164.732268,-45.829802,1.585)); +#249927 = VECTOR('',#249928,1.); +#249928 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#249929 = ORIENTED_EDGE('',*,*,#249930,.T.); +#249930 = EDGE_CURVE('',#249923,#249931,#249933,.T.); +#249931 = VERTEX_POINT('',#249932); +#249932 = CARTESIAN_POINT('',(164.142876,-45.253647,1.585)); +#249933 = LINE('',#249934,#249935); +#249934 = CARTESIAN_POINT('',(164.701786,-45.812556,1.585)); +#249935 = VECTOR('',#249936,1.); +#249936 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#249937 = ORIENTED_EDGE('',*,*,#249938,.T.); +#249938 = EDGE_CURVE('',#249931,#249939,#249941,.T.); +#249939 = VERTEX_POINT('',#249940); +#249940 = CARTESIAN_POINT('',(164.028363,-45.215476,1.585)); +#249941 = LINE('',#249942,#249943); +#249942 = CARTESIAN_POINT('',(164.142876,-45.253647,1.585)); +#249943 = VECTOR('',#249944,1.); +#249944 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#249945 = ORIENTED_EDGE('',*,*,#249946,.T.); +#249946 = EDGE_CURVE('',#249939,#249947,#249949,.T.); +#249947 = VERTEX_POINT('',#249948); +#249948 = CARTESIAN_POINT('',(163.963,-45.215476,1.585)); +#249949 = LINE('',#249950,#249951); +#249950 = CARTESIAN_POINT('',(164.028363,-45.215476,1.585)); +#249951 = VECTOR('',#249952,1.); +#249952 = DIRECTION('',(-1.,0.,0.)); +#249953 = ORIENTED_EDGE('',*,*,#249954,.T.); +#249954 = EDGE_CURVE('',#249947,#249955,#249957,.T.); +#249955 = VERTEX_POINT('',#249956); +#249956 = CARTESIAN_POINT('',(163.829819,-45.348657,1.585)); +#249957 = CIRCLE('',#249958,0.18686440374); +#249958 = AXIS2_PLACEMENT_3D('',#249959,#249960,#249961); +#249959 = CARTESIAN_POINT('',(164.010536,-45.396193,1.585)); +#249960 = DIRECTION('',(0.,0.,1.)); +#249961 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#249962 = ORIENTED_EDGE('',*,*,#249963,.T.); +#249963 = EDGE_CURVE('',#249955,#249964,#249966,.T.); +#249964 = VERTEX_POINT('',#249965); +#249965 = CARTESIAN_POINT('',(163.829819,-45.551342,1.585)); +#249966 = LINE('',#249967,#249968); +#249967 = CARTESIAN_POINT('',(163.829819,-45.348657,1.585)); +#249968 = VECTOR('',#249969,1.); +#249969 = DIRECTION('',(0.,-1.,0.)); +#249970 = ORIENTED_EDGE('',*,*,#249971,.T.); +#249971 = EDGE_CURVE('',#249964,#249972,#249974,.T.); +#249972 = VERTEX_POINT('',#249973); +#249973 = CARTESIAN_POINT('',(163.864077,-45.619858,1.585)); +#249974 = LINE('',#249975,#249976); +#249975 = CARTESIAN_POINT('',(163.829819,-45.551342,1.585)); +#249976 = VECTOR('',#249977,1.); +#249977 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#249978 = ORIENTED_EDGE('',*,*,#249979,.T.); +#249979 = EDGE_CURVE('',#249972,#249980,#249982,.T.); +#249980 = VERTEX_POINT('',#249981); +#249981 = CARTESIAN_POINT('',(163.912417,-45.670236,1.585)); +#249982 = LINE('',#249983,#249984); +#249983 = CARTESIAN_POINT('',(163.864077,-45.619858,1.585)); +#249984 = VECTOR('',#249985,1.); +#249985 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#249986 = ORIENTED_EDGE('',*,*,#249987,.T.); +#249987 = EDGE_CURVE('',#249980,#249988,#249990,.T.); +#249988 = VERTEX_POINT('',#249989); +#249989 = CARTESIAN_POINT('',(163.797024,-45.764937,1.585)); +#249990 = CIRCLE('',#249991,7.500003178657E-02); +#249991 = AXIS2_PLACEMENT_3D('',#249992,#249993,#249994); +#249992 = CARTESIAN_POINT('',(163.85005656212,-45.7119035,1.585)); +#249993 = DIRECTION('',(0.,0.,-1.)); +#249994 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#249995 = ORIENTED_EDGE('',*,*,#249996,.T.); +#249996 = EDGE_CURVE('',#249988,#249997,#249999,.T.); +#249997 = VERTEX_POINT('',#249998); +#249998 = CARTESIAN_POINT('',(163.735356,-45.697826,1.585)); +#249999 = LINE('',#250000,#250001); +#250000 = CARTESIAN_POINT('',(163.797024,-45.764937,1.585)); +#250001 = VECTOR('',#250002,1.); +#250002 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#250003 = ORIENTED_EDGE('',*,*,#250004,.T.); +#250004 = EDGE_CURVE('',#249997,#250005,#250007,.T.); +#250005 = VERTEX_POINT('',#250006); +#250006 = CARTESIAN_POINT('',(163.744686,-45.18843,1.585)); +#250007 = CIRCLE('',#250008,0.450051227017); +#250008 = AXIS2_PLACEMENT_3D('',#250009,#250010,#250011); +#250009 = CARTESIAN_POINT('',(164.11097532415,-45.44992232866,1.585)); +#250010 = DIRECTION('',(0.,0.,-1.)); +#250011 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#250012 = ORIENTED_EDGE('',*,*,#250013,.T.); +#250013 = EDGE_CURVE('',#250005,#249847,#250014,.T.); +#250014 = LINE('',#250015,#250016); +#250015 = CARTESIAN_POINT('',(163.744686,-45.18843,1.585)); +#250016 = VECTOR('',#250017,1.); +#250017 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#250018 = PLANE('',#250019); +#250019 = AXIS2_PLACEMENT_3D('',#250020,#250021,#250022); +#250020 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250021 = DIRECTION('',(0.,0.,1.)); +#250022 = DIRECTION('',(1.,0.,-0.)); +#250023 = SHELL_BASED_SURFACE_MODEL('',(#250024)); +#250024 = OPEN_SHELL('',(#250025)); +#250025 = ADVANCED_FACE('',(#250026),#250094,.T.); +#250026 = FACE_BOUND('',#250027,.F.); +#250027 = EDGE_LOOP('',(#250028,#250039,#250047,#250055,#250063,#250071, + #250080,#250088)); +#250028 = ORIENTED_EDGE('',*,*,#250029,.T.); +#250029 = EDGE_CURVE('',#250030,#250032,#250034,.T.); +#250030 = VERTEX_POINT('',#250031); +#250031 = CARTESIAN_POINT('',(185.24165,-43.7331,1.585)); +#250032 = VERTEX_POINT('',#250033); +#250033 = CARTESIAN_POINT('',(185.24165,-43.6131,1.585)); +#250034 = CIRCLE('',#250035,6.000000000042E-02); +#250035 = AXIS2_PLACEMENT_3D('',#250036,#250037,#250038); +#250036 = CARTESIAN_POINT('',(185.24164977441,-43.6731,1.585)); +#250037 = DIRECTION('',(0.,0.,-1.)); +#250038 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#250039 = ORIENTED_EDGE('',*,*,#250040,.T.); +#250040 = EDGE_CURVE('',#250032,#250041,#250043,.T.); +#250041 = VERTEX_POINT('',#250042); +#250042 = CARTESIAN_POINT('',(189.34165,-43.6131,1.585)); +#250043 = LINE('',#250044,#250045); +#250044 = CARTESIAN_POINT('',(185.24165,-43.6131,1.585)); +#250045 = VECTOR('',#250046,1.); +#250046 = DIRECTION('',(1.,0.,0.)); +#250047 = ORIENTED_EDGE('',*,*,#250048,.T.); +#250048 = EDGE_CURVE('',#250041,#250049,#250051,.T.); +#250049 = VERTEX_POINT('',#250050); +#250050 = CARTESIAN_POINT('',(189.364611,-43.617667,1.585)); +#250051 = LINE('',#250052,#250053); +#250052 = CARTESIAN_POINT('',(189.34165,-43.6131,1.585)); +#250053 = VECTOR('',#250054,1.); +#250054 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#250055 = ORIENTED_EDGE('',*,*,#250056,.T.); +#250056 = EDGE_CURVE('',#250049,#250057,#250059,.T.); +#250057 = VERTEX_POINT('',#250058); +#250058 = CARTESIAN_POINT('',(189.384076,-43.630674,1.585)); +#250059 = LINE('',#250060,#250061); +#250060 = CARTESIAN_POINT('',(189.364611,-43.617667,1.585)); +#250061 = VECTOR('',#250062,1.); +#250062 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#250063 = ORIENTED_EDGE('',*,*,#250064,.T.); +#250064 = EDGE_CURVE('',#250057,#250065,#250067,.T.); +#250065 = VERTEX_POINT('',#250066); +#250066 = CARTESIAN_POINT('',(191.484076,-45.730673,1.585)); +#250067 = LINE('',#250068,#250069); +#250068 = CARTESIAN_POINT('',(189.384076,-43.630674,1.585)); +#250069 = VECTOR('',#250070,1.); +#250070 = DIRECTION('',(0.707106949545,-0.707106612828,0.)); +#250071 = ORIENTED_EDGE('',*,*,#250072,.T.); +#250072 = EDGE_CURVE('',#250065,#250073,#250075,.T.); +#250073 = VERTEX_POINT('',#250074); +#250074 = CARTESIAN_POINT('',(191.399223,-45.815526,1.585)); +#250075 = CIRCLE('',#250076,6.000013170922E-02); +#250076 = AXIS2_PLACEMENT_3D('',#250077,#250078,#250079); +#250077 = CARTESIAN_POINT('',(191.4416500587,-45.7731000587,1.585)); +#250078 = DIRECTION('',(0.,0.,-1.)); +#250079 = DIRECTION('',(0.707097469327,0.707116092923,0.)); +#250080 = ORIENTED_EDGE('',*,*,#250081,.T.); +#250081 = EDGE_CURVE('',#250073,#250082,#250084,.T.); +#250082 = VERTEX_POINT('',#250083); +#250083 = CARTESIAN_POINT('',(189.316798,-43.7331,1.585)); +#250084 = LINE('',#250085,#250086); +#250085 = CARTESIAN_POINT('',(191.399223,-45.815526,1.585)); +#250086 = VECTOR('',#250087,1.); +#250087 = DIRECTION('',(-0.707106611407,0.707106950966,0.)); +#250088 = ORIENTED_EDGE('',*,*,#250089,.T.); +#250089 = EDGE_CURVE('',#250082,#250030,#250090,.T.); +#250090 = LINE('',#250091,#250092); +#250091 = CARTESIAN_POINT('',(189.316798,-43.7331,1.585)); +#250092 = VECTOR('',#250093,1.); +#250093 = DIRECTION('',(-1.,0.,0.)); +#250094 = PLANE('',#250095); +#250095 = AXIS2_PLACEMENT_3D('',#250096,#250097,#250098); +#250096 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250097 = DIRECTION('',(0.,0.,1.)); +#250098 = DIRECTION('',(1.,0.,-0.)); +#250099 = SHELL_BASED_SURFACE_MODEL('',(#250100)); +#250100 = OPEN_SHELL('',(#250101)); +#250101 = ADVANCED_FACE('',(#250102),#250188,.T.); +#250102 = FACE_BOUND('',#250103,.F.); +#250103 = EDGE_LOOP('',(#250104,#250115,#250123,#250132,#250140,#250148, + #250156,#250165,#250173,#250182)); +#250104 = ORIENTED_EDGE('',*,*,#250105,.T.); +#250105 = EDGE_CURVE('',#250106,#250108,#250110,.T.); +#250106 = VERTEX_POINT('',#250107); +#250107 = CARTESIAN_POINT('',(192.50915,-43.3631,1.585)); +#250108 = VERTEX_POINT('',#250109); +#250109 = CARTESIAN_POINT('',(192.56915,-43.3031,1.585)); +#250110 = CIRCLE('',#250111,5.999932016262E-02); +#250111 = AXIS2_PLACEMENT_3D('',#250112,#250113,#250114); +#250112 = CARTESIAN_POINT('',(192.56914932015,-43.36309932015,1.585)); +#250113 = DIRECTION('',(0.,0.,-1.)); +#250114 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250115 = ORIENTED_EDGE('',*,*,#250116,.T.); +#250116 = EDGE_CURVE('',#250108,#250117,#250119,.T.); +#250117 = VERTEX_POINT('',#250118); +#250118 = CARTESIAN_POINT('',(195.25415,-43.3031,1.585)); +#250119 = LINE('',#250120,#250121); +#250120 = CARTESIAN_POINT('',(192.56915,-43.3031,1.585)); +#250121 = VECTOR('',#250122,1.); +#250122 = DIRECTION('',(1.,0.,0.)); +#250123 = ORIENTED_EDGE('',*,*,#250124,.T.); +#250124 = EDGE_CURVE('',#250117,#250125,#250127,.T.); +#250125 = VERTEX_POINT('',#250126); +#250126 = CARTESIAN_POINT('',(195.25415,-43.4231,1.585)); +#250127 = CIRCLE('',#250128,6.000000000043E-02); +#250128 = AXIS2_PLACEMENT_3D('',#250129,#250130,#250131); +#250129 = CARTESIAN_POINT('',(195.25415022558,-43.3631,1.585)); +#250130 = DIRECTION('',(0.,0.,-1.)); +#250131 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250132 = ORIENTED_EDGE('',*,*,#250133,.T.); +#250133 = EDGE_CURVE('',#250125,#250134,#250136,.T.); +#250134 = VERTEX_POINT('',#250135); +#250135 = CARTESIAN_POINT('',(192.62915,-43.4231,1.585)); +#250136 = LINE('',#250137,#250138); +#250137 = CARTESIAN_POINT('',(195.25415,-43.4231,1.585)); +#250138 = VECTOR('',#250139,1.); +#250139 = DIRECTION('',(-1.,0.,0.)); +#250140 = ORIENTED_EDGE('',*,*,#250141,.T.); +#250141 = EDGE_CURVE('',#250134,#250142,#250144,.T.); +#250142 = VERTEX_POINT('',#250143); +#250143 = CARTESIAN_POINT('',(192.62915,-45.2231,1.585)); +#250144 = LINE('',#250145,#250146); +#250145 = CARTESIAN_POINT('',(192.62915,-43.4231,1.585)); +#250146 = VECTOR('',#250147,1.); +#250147 = DIRECTION('',(0.,-1.,0.)); +#250148 = ORIENTED_EDGE('',*,*,#250149,.T.); +#250149 = EDGE_CURVE('',#250142,#250150,#250152,.T.); +#250150 = VERTEX_POINT('',#250151); +#250151 = CARTESIAN_POINT('',(195.25415,-45.2231,1.585)); +#250152 = LINE('',#250153,#250154); +#250153 = CARTESIAN_POINT('',(192.62915,-45.2231,1.585)); +#250154 = VECTOR('',#250155,1.); +#250155 = DIRECTION('',(1.,0.,0.)); +#250156 = ORIENTED_EDGE('',*,*,#250157,.T.); +#250157 = EDGE_CURVE('',#250150,#250158,#250160,.T.); +#250158 = VERTEX_POINT('',#250159); +#250159 = CARTESIAN_POINT('',(195.25415,-45.3431,1.585)); +#250160 = CIRCLE('',#250161,6.000000000043E-02); +#250161 = AXIS2_PLACEMENT_3D('',#250162,#250163,#250164); +#250162 = CARTESIAN_POINT('',(195.25415022558,-45.2831,1.585)); +#250163 = DIRECTION('',(0.,0.,-1.)); +#250164 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250165 = ORIENTED_EDGE('',*,*,#250166,.T.); +#250166 = EDGE_CURVE('',#250158,#250167,#250169,.T.); +#250167 = VERTEX_POINT('',#250168); +#250168 = CARTESIAN_POINT('',(192.56915,-45.3431,1.585)); +#250169 = LINE('',#250170,#250171); +#250170 = CARTESIAN_POINT('',(195.25415,-45.3431,1.585)); +#250171 = VECTOR('',#250172,1.); +#250172 = DIRECTION('',(-1.,0.,0.)); +#250173 = ORIENTED_EDGE('',*,*,#250174,.T.); +#250174 = EDGE_CURVE('',#250167,#250175,#250177,.T.); +#250175 = VERTEX_POINT('',#250176); +#250176 = CARTESIAN_POINT('',(192.50915,-45.2831,1.585)); +#250177 = CIRCLE('',#250178,5.999932016259E-02); +#250178 = AXIS2_PLACEMENT_3D('',#250179,#250180,#250181); +#250179 = CARTESIAN_POINT('',(192.56914932015,-45.28310067984,1.585)); +#250180 = DIRECTION('',(0.,0.,-1.)); +#250181 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250182 = ORIENTED_EDGE('',*,*,#250183,.T.); +#250183 = EDGE_CURVE('',#250175,#250106,#250184,.T.); +#250184 = LINE('',#250185,#250186); +#250185 = CARTESIAN_POINT('',(192.50915,-45.2831,1.585)); +#250186 = VECTOR('',#250187,1.); +#250187 = DIRECTION('',(0.,1.,0.)); +#250188 = PLANE('',#250189); +#250189 = AXIS2_PLACEMENT_3D('',#250190,#250191,#250192); +#250190 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250191 = DIRECTION('',(0.,0.,1.)); +#250192 = DIRECTION('',(1.,0.,-0.)); +#250193 = SHELL_BASED_SURFACE_MODEL('',(#250194)); +#250194 = OPEN_SHELL('',(#250195)); +#250195 = ADVANCED_FACE('',(#250196),#250282,.T.); +#250196 = FACE_BOUND('',#250197,.F.); +#250197 = EDGE_LOOP('',(#250198,#250209,#250217,#250226,#250234,#250242, + #250250,#250259,#250267,#250276)); +#250198 = ORIENTED_EDGE('',*,*,#250199,.T.); +#250199 = EDGE_CURVE('',#250200,#250202,#250204,.T.); +#250200 = VERTEX_POINT('',#250201); +#250201 = CARTESIAN_POINT('',(196.50915,-43.3631,1.585)); +#250202 = VERTEX_POINT('',#250203); +#250203 = CARTESIAN_POINT('',(196.56915,-43.3031,1.585)); +#250204 = CIRCLE('',#250205,5.999932016262E-02); +#250205 = AXIS2_PLACEMENT_3D('',#250206,#250207,#250208); +#250206 = CARTESIAN_POINT('',(196.56914932015,-43.36309932015,1.585)); +#250207 = DIRECTION('',(0.,0.,-1.)); +#250208 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250209 = ORIENTED_EDGE('',*,*,#250210,.T.); +#250210 = EDGE_CURVE('',#250202,#250211,#250213,.T.); +#250211 = VERTEX_POINT('',#250212); +#250212 = CARTESIAN_POINT('',(199.25415,-43.3031,1.585)); +#250213 = LINE('',#250214,#250215); +#250214 = CARTESIAN_POINT('',(196.56915,-43.3031,1.585)); +#250215 = VECTOR('',#250216,1.); +#250216 = DIRECTION('',(1.,0.,0.)); +#250217 = ORIENTED_EDGE('',*,*,#250218,.T.); +#250218 = EDGE_CURVE('',#250211,#250219,#250221,.T.); +#250219 = VERTEX_POINT('',#250220); +#250220 = CARTESIAN_POINT('',(199.25415,-43.4231,1.585)); +#250221 = CIRCLE('',#250222,6.000000000043E-02); +#250222 = AXIS2_PLACEMENT_3D('',#250223,#250224,#250225); +#250223 = CARTESIAN_POINT('',(199.25415022558,-43.3631,1.585)); +#250224 = DIRECTION('',(0.,0.,-1.)); +#250225 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250226 = ORIENTED_EDGE('',*,*,#250227,.T.); +#250227 = EDGE_CURVE('',#250219,#250228,#250230,.T.); +#250228 = VERTEX_POINT('',#250229); +#250229 = CARTESIAN_POINT('',(196.62915,-43.4231,1.585)); +#250230 = LINE('',#250231,#250232); +#250231 = CARTESIAN_POINT('',(199.25415,-43.4231,1.585)); +#250232 = VECTOR('',#250233,1.); +#250233 = DIRECTION('',(-1.,0.,0.)); +#250234 = ORIENTED_EDGE('',*,*,#250235,.T.); +#250235 = EDGE_CURVE('',#250228,#250236,#250238,.T.); +#250236 = VERTEX_POINT('',#250237); +#250237 = CARTESIAN_POINT('',(196.62915,-45.2231,1.585)); +#250238 = LINE('',#250239,#250240); +#250239 = CARTESIAN_POINT('',(196.62915,-43.4231,1.585)); +#250240 = VECTOR('',#250241,1.); +#250241 = DIRECTION('',(0.,-1.,0.)); +#250242 = ORIENTED_EDGE('',*,*,#250243,.T.); +#250243 = EDGE_CURVE('',#250236,#250244,#250246,.T.); +#250244 = VERTEX_POINT('',#250245); +#250245 = CARTESIAN_POINT('',(199.25415,-45.2231,1.585)); +#250246 = LINE('',#250247,#250248); +#250247 = CARTESIAN_POINT('',(196.62915,-45.2231,1.585)); +#250248 = VECTOR('',#250249,1.); +#250249 = DIRECTION('',(1.,0.,0.)); +#250250 = ORIENTED_EDGE('',*,*,#250251,.T.); +#250251 = EDGE_CURVE('',#250244,#250252,#250254,.T.); +#250252 = VERTEX_POINT('',#250253); +#250253 = CARTESIAN_POINT('',(199.25415,-45.3431,1.585)); +#250254 = CIRCLE('',#250255,6.000000000043E-02); +#250255 = AXIS2_PLACEMENT_3D('',#250256,#250257,#250258); +#250256 = CARTESIAN_POINT('',(199.25415022558,-45.2831,1.585)); +#250257 = DIRECTION('',(0.,0.,-1.)); +#250258 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250259 = ORIENTED_EDGE('',*,*,#250260,.T.); +#250260 = EDGE_CURVE('',#250252,#250261,#250263,.T.); +#250261 = VERTEX_POINT('',#250262); +#250262 = CARTESIAN_POINT('',(196.56915,-45.3431,1.585)); +#250263 = LINE('',#250264,#250265); +#250264 = CARTESIAN_POINT('',(199.25415,-45.3431,1.585)); +#250265 = VECTOR('',#250266,1.); +#250266 = DIRECTION('',(-1.,0.,0.)); +#250267 = ORIENTED_EDGE('',*,*,#250268,.T.); +#250268 = EDGE_CURVE('',#250261,#250269,#250271,.T.); +#250269 = VERTEX_POINT('',#250270); +#250270 = CARTESIAN_POINT('',(196.50915,-45.2831,1.585)); +#250271 = CIRCLE('',#250272,5.999932016259E-02); +#250272 = AXIS2_PLACEMENT_3D('',#250273,#250274,#250275); +#250273 = CARTESIAN_POINT('',(196.56914932015,-45.28310067984,1.585)); +#250274 = DIRECTION('',(0.,0.,-1.)); +#250275 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250276 = ORIENTED_EDGE('',*,*,#250277,.T.); +#250277 = EDGE_CURVE('',#250269,#250200,#250278,.T.); +#250278 = LINE('',#250279,#250280); +#250279 = CARTESIAN_POINT('',(196.50915,-45.2831,1.585)); +#250280 = VECTOR('',#250281,1.); +#250281 = DIRECTION('',(0.,1.,0.)); +#250282 = PLANE('',#250283); +#250283 = AXIS2_PLACEMENT_3D('',#250284,#250285,#250286); +#250284 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250285 = DIRECTION('',(0.,0.,1.)); +#250286 = DIRECTION('',(1.,0.,-0.)); +#250287 = SHELL_BASED_SURFACE_MODEL('',(#250288)); +#250288 = OPEN_SHELL('',(#250289)); +#250289 = ADVANCED_FACE('',(#250290),#250376,.T.); +#250290 = FACE_BOUND('',#250291,.F.); +#250291 = EDGE_LOOP('',(#250292,#250303,#250311,#250320,#250328,#250336, + #250344,#250353,#250361,#250370)); +#250292 = ORIENTED_EDGE('',*,*,#250293,.T.); +#250293 = EDGE_CURVE('',#250294,#250296,#250298,.T.); +#250294 = VERTEX_POINT('',#250295); +#250295 = CARTESIAN_POINT('',(200.50915,-43.3631,1.585)); +#250296 = VERTEX_POINT('',#250297); +#250297 = CARTESIAN_POINT('',(200.56915,-43.3031,1.585)); +#250298 = CIRCLE('',#250299,5.999932016262E-02); +#250299 = AXIS2_PLACEMENT_3D('',#250300,#250301,#250302); +#250300 = CARTESIAN_POINT('',(200.56914932015,-43.36309932015,1.585)); +#250301 = DIRECTION('',(0.,0.,-1.)); +#250302 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250303 = ORIENTED_EDGE('',*,*,#250304,.T.); +#250304 = EDGE_CURVE('',#250296,#250305,#250307,.T.); +#250305 = VERTEX_POINT('',#250306); +#250306 = CARTESIAN_POINT('',(203.25415,-43.3031,1.585)); +#250307 = LINE('',#250308,#250309); +#250308 = CARTESIAN_POINT('',(200.56915,-43.3031,1.585)); +#250309 = VECTOR('',#250310,1.); +#250310 = DIRECTION('',(1.,0.,0.)); +#250311 = ORIENTED_EDGE('',*,*,#250312,.T.); +#250312 = EDGE_CURVE('',#250305,#250313,#250315,.T.); +#250313 = VERTEX_POINT('',#250314); +#250314 = CARTESIAN_POINT('',(203.25415,-43.4231,1.585)); +#250315 = CIRCLE('',#250316,6.000000000043E-02); +#250316 = AXIS2_PLACEMENT_3D('',#250317,#250318,#250319); +#250317 = CARTESIAN_POINT('',(203.25415022558,-43.3631,1.585)); +#250318 = DIRECTION('',(0.,0.,-1.)); +#250319 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250320 = ORIENTED_EDGE('',*,*,#250321,.T.); +#250321 = EDGE_CURVE('',#250313,#250322,#250324,.T.); +#250322 = VERTEX_POINT('',#250323); +#250323 = CARTESIAN_POINT('',(200.62915,-43.4231,1.585)); +#250324 = LINE('',#250325,#250326); +#250325 = CARTESIAN_POINT('',(203.25415,-43.4231,1.585)); +#250326 = VECTOR('',#250327,1.); +#250327 = DIRECTION('',(-1.,0.,0.)); +#250328 = ORIENTED_EDGE('',*,*,#250329,.T.); +#250329 = EDGE_CURVE('',#250322,#250330,#250332,.T.); +#250330 = VERTEX_POINT('',#250331); +#250331 = CARTESIAN_POINT('',(200.62915,-45.2231,1.585)); +#250332 = LINE('',#250333,#250334); +#250333 = CARTESIAN_POINT('',(200.62915,-43.4231,1.585)); +#250334 = VECTOR('',#250335,1.); +#250335 = DIRECTION('',(0.,-1.,0.)); +#250336 = ORIENTED_EDGE('',*,*,#250337,.T.); +#250337 = EDGE_CURVE('',#250330,#250338,#250340,.T.); +#250338 = VERTEX_POINT('',#250339); +#250339 = CARTESIAN_POINT('',(203.25415,-45.2231,1.585)); +#250340 = LINE('',#250341,#250342); +#250341 = CARTESIAN_POINT('',(200.62915,-45.2231,1.585)); +#250342 = VECTOR('',#250343,1.); +#250343 = DIRECTION('',(1.,0.,0.)); +#250344 = ORIENTED_EDGE('',*,*,#250345,.T.); +#250345 = EDGE_CURVE('',#250338,#250346,#250348,.T.); +#250346 = VERTEX_POINT('',#250347); +#250347 = CARTESIAN_POINT('',(203.25415,-45.3431,1.585)); +#250348 = CIRCLE('',#250349,6.000000000043E-02); +#250349 = AXIS2_PLACEMENT_3D('',#250350,#250351,#250352); +#250350 = CARTESIAN_POINT('',(203.25415022558,-45.2831,1.585)); +#250351 = DIRECTION('',(0.,0.,-1.)); +#250352 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250353 = ORIENTED_EDGE('',*,*,#250354,.T.); +#250354 = EDGE_CURVE('',#250346,#250355,#250357,.T.); +#250355 = VERTEX_POINT('',#250356); +#250356 = CARTESIAN_POINT('',(200.56915,-45.3431,1.585)); +#250357 = LINE('',#250358,#250359); +#250358 = CARTESIAN_POINT('',(203.25415,-45.3431,1.585)); +#250359 = VECTOR('',#250360,1.); +#250360 = DIRECTION('',(-1.,0.,0.)); +#250361 = ORIENTED_EDGE('',*,*,#250362,.T.); +#250362 = EDGE_CURVE('',#250355,#250363,#250365,.T.); +#250363 = VERTEX_POINT('',#250364); +#250364 = CARTESIAN_POINT('',(200.50915,-45.2831,1.585)); +#250365 = CIRCLE('',#250366,5.999932016259E-02); +#250366 = AXIS2_PLACEMENT_3D('',#250367,#250368,#250369); +#250367 = CARTESIAN_POINT('',(200.56914932015,-45.28310067984,1.585)); +#250368 = DIRECTION('',(0.,0.,-1.)); +#250369 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250370 = ORIENTED_EDGE('',*,*,#250371,.T.); +#250371 = EDGE_CURVE('',#250363,#250294,#250372,.T.); +#250372 = LINE('',#250373,#250374); +#250373 = CARTESIAN_POINT('',(200.50915,-45.2831,1.585)); +#250374 = VECTOR('',#250375,1.); +#250375 = DIRECTION('',(0.,1.,0.)); +#250376 = PLANE('',#250377); +#250377 = AXIS2_PLACEMENT_3D('',#250378,#250379,#250380); +#250378 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250379 = DIRECTION('',(0.,0.,1.)); +#250380 = DIRECTION('',(1.,0.,-0.)); +#250381 = SHELL_BASED_SURFACE_MODEL('',(#250382)); +#250382 = OPEN_SHELL('',(#250383)); +#250383 = ADVANCED_FACE('',(#250384),#250470,.T.); +#250384 = FACE_BOUND('',#250385,.F.); +#250385 = EDGE_LOOP('',(#250386,#250397,#250405,#250414,#250422,#250430, + #250438,#250447,#250455,#250464)); +#250386 = ORIENTED_EDGE('',*,*,#250387,.T.); +#250387 = EDGE_CURVE('',#250388,#250390,#250392,.T.); +#250388 = VERTEX_POINT('',#250389); +#250389 = CARTESIAN_POINT('',(204.50915,-43.3631,1.585)); +#250390 = VERTEX_POINT('',#250391); +#250391 = CARTESIAN_POINT('',(204.56915,-43.3031,1.585)); +#250392 = CIRCLE('',#250393,5.999932016262E-02); +#250393 = AXIS2_PLACEMENT_3D('',#250394,#250395,#250396); +#250394 = CARTESIAN_POINT('',(204.56914932015,-43.36309932015,1.585)); +#250395 = DIRECTION('',(0.,0.,-1.)); +#250396 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#250397 = ORIENTED_EDGE('',*,*,#250398,.T.); +#250398 = EDGE_CURVE('',#250390,#250399,#250401,.T.); +#250399 = VERTEX_POINT('',#250400); +#250400 = CARTESIAN_POINT('',(207.25415,-43.3031,1.585)); +#250401 = LINE('',#250402,#250403); +#250402 = CARTESIAN_POINT('',(204.56915,-43.3031,1.585)); +#250403 = VECTOR('',#250404,1.); +#250404 = DIRECTION('',(1.,0.,0.)); +#250405 = ORIENTED_EDGE('',*,*,#250406,.T.); +#250406 = EDGE_CURVE('',#250399,#250407,#250409,.T.); +#250407 = VERTEX_POINT('',#250408); +#250408 = CARTESIAN_POINT('',(207.25415,-43.4231,1.585)); +#250409 = CIRCLE('',#250410,6.000000000043E-02); +#250410 = AXIS2_PLACEMENT_3D('',#250411,#250412,#250413); +#250411 = CARTESIAN_POINT('',(207.25415022558,-43.3631,1.585)); +#250412 = DIRECTION('',(0.,0.,-1.)); +#250413 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250414 = ORIENTED_EDGE('',*,*,#250415,.T.); +#250415 = EDGE_CURVE('',#250407,#250416,#250418,.T.); +#250416 = VERTEX_POINT('',#250417); +#250417 = CARTESIAN_POINT('',(204.62915,-43.4231,1.585)); +#250418 = LINE('',#250419,#250420); +#250419 = CARTESIAN_POINT('',(207.25415,-43.4231,1.585)); +#250420 = VECTOR('',#250421,1.); +#250421 = DIRECTION('',(-1.,0.,0.)); +#250422 = ORIENTED_EDGE('',*,*,#250423,.T.); +#250423 = EDGE_CURVE('',#250416,#250424,#250426,.T.); +#250424 = VERTEX_POINT('',#250425); +#250425 = CARTESIAN_POINT('',(204.62915,-45.2231,1.585)); +#250426 = LINE('',#250427,#250428); +#250427 = CARTESIAN_POINT('',(204.62915,-43.4231,1.585)); +#250428 = VECTOR('',#250429,1.); +#250429 = DIRECTION('',(0.,-1.,0.)); +#250430 = ORIENTED_EDGE('',*,*,#250431,.T.); +#250431 = EDGE_CURVE('',#250424,#250432,#250434,.T.); +#250432 = VERTEX_POINT('',#250433); +#250433 = CARTESIAN_POINT('',(207.25415,-45.2231,1.585)); +#250434 = LINE('',#250435,#250436); +#250435 = CARTESIAN_POINT('',(204.62915,-45.2231,1.585)); +#250436 = VECTOR('',#250437,1.); +#250437 = DIRECTION('',(1.,0.,0.)); +#250438 = ORIENTED_EDGE('',*,*,#250439,.T.); +#250439 = EDGE_CURVE('',#250432,#250440,#250442,.T.); +#250440 = VERTEX_POINT('',#250441); +#250441 = CARTESIAN_POINT('',(207.25415,-45.3431,1.585)); +#250442 = CIRCLE('',#250443,6.000000000043E-02); +#250443 = AXIS2_PLACEMENT_3D('',#250444,#250445,#250446); +#250444 = CARTESIAN_POINT('',(207.25415022558,-45.2831,1.585)); +#250445 = DIRECTION('',(0.,0.,-1.)); +#250446 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250447 = ORIENTED_EDGE('',*,*,#250448,.T.); +#250448 = EDGE_CURVE('',#250440,#250449,#250451,.T.); +#250449 = VERTEX_POINT('',#250450); +#250450 = CARTESIAN_POINT('',(204.56915,-45.3431,1.585)); +#250451 = LINE('',#250452,#250453); +#250452 = CARTESIAN_POINT('',(207.25415,-45.3431,1.585)); +#250453 = VECTOR('',#250454,1.); +#250454 = DIRECTION('',(-1.,0.,0.)); +#250455 = ORIENTED_EDGE('',*,*,#250456,.T.); +#250456 = EDGE_CURVE('',#250449,#250457,#250459,.T.); +#250457 = VERTEX_POINT('',#250458); +#250458 = CARTESIAN_POINT('',(204.50915,-45.2831,1.585)); +#250459 = CIRCLE('',#250460,5.999932016259E-02); +#250460 = AXIS2_PLACEMENT_3D('',#250461,#250462,#250463); +#250461 = CARTESIAN_POINT('',(204.56914932015,-45.28310067984,1.585)); +#250462 = DIRECTION('',(0.,0.,-1.)); +#250463 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#250464 = ORIENTED_EDGE('',*,*,#250465,.T.); +#250465 = EDGE_CURVE('',#250457,#250388,#250466,.T.); +#250466 = LINE('',#250467,#250468); +#250467 = CARTESIAN_POINT('',(204.50915,-45.2831,1.585)); +#250468 = VECTOR('',#250469,1.); +#250469 = DIRECTION('',(0.,1.,0.)); +#250470 = PLANE('',#250471); +#250471 = AXIS2_PLACEMENT_3D('',#250472,#250473,#250474); +#250472 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250473 = DIRECTION('',(0.,0.,1.)); +#250474 = DIRECTION('',(1.,0.,-0.)); +#250475 = SHELL_BASED_SURFACE_MODEL('',(#250476)); +#250476 = OPEN_SHELL('',(#250477)); +#250477 = ADVANCED_FACE('',(#250478),#250653,.T.); +#250478 = FACE_BOUND('',#250479,.F.); +#250479 = EDGE_LOOP('',(#250480,#250490,#250498,#250506,#250514,#250522, + #250531,#250539,#250548,#250556,#250564,#250572,#250580,#250588, + #250597,#250605,#250613,#250621,#250630,#250638,#250647)); +#250480 = ORIENTED_EDGE('',*,*,#250481,.T.); +#250481 = EDGE_CURVE('',#250482,#250484,#250486,.T.); +#250482 = VERTEX_POINT('',#250483); +#250483 = CARTESIAN_POINT('',(163.810216,-44.172596,1.585)); +#250484 = VERTEX_POINT('',#250485); +#250485 = CARTESIAN_POINT('',(163.930663,-44.114536,1.585)); +#250486 = LINE('',#250487,#250488); +#250487 = CARTESIAN_POINT('',(163.810216,-44.172596,1.585)); +#250488 = VECTOR('',#250489,1.); +#250489 = DIRECTION('',(0.900805720197,0.434222356012,0.)); +#250490 = ORIENTED_EDGE('',*,*,#250491,.T.); +#250491 = EDGE_CURVE('',#250484,#250492,#250494,.T.); +#250492 = VERTEX_POINT('',#250493); +#250493 = CARTESIAN_POINT('',(164.047938,-44.113824,1.585)); +#250494 = LINE('',#250495,#250496); +#250495 = CARTESIAN_POINT('',(163.930663,-44.114536,1.585)); +#250496 = VECTOR('',#250497,1.); +#250497 = DIRECTION('',(0.999981570774,6.071088283019E-03,0.)); +#250498 = ORIENTED_EDGE('',*,*,#250499,.T.); +#250499 = EDGE_CURVE('',#250492,#250500,#250502,.T.); +#250500 = VERTEX_POINT('',#250501); +#250501 = CARTESIAN_POINT('',(164.225058,-44.173354,1.585)); +#250502 = LINE('',#250503,#250504); +#250503 = CARTESIAN_POINT('',(164.047938,-44.113824,1.585)); +#250504 = VECTOR('',#250505,1.); +#250505 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#250506 = ORIENTED_EDGE('',*,*,#250507,.T.); +#250507 = EDGE_CURVE('',#250500,#250508,#250510,.T.); +#250508 = VERTEX_POINT('',#250509); +#250509 = CARTESIAN_POINT('',(164.679819,-44.626076,1.585)); +#250510 = LINE('',#250511,#250512); +#250511 = CARTESIAN_POINT('',(164.225058,-44.173354,1.585)); +#250512 = VECTOR('',#250513,1.); +#250513 = DIRECTION('',(0.708693772163,-0.705516220435,0.)); +#250514 = ORIENTED_EDGE('',*,*,#250515,.T.); +#250515 = EDGE_CURVE('',#250508,#250516,#250518,.T.); +#250516 = VERTEX_POINT('',#250517); +#250517 = CARTESIAN_POINT('',(164.68126,-44.173463,1.585)); +#250518 = LINE('',#250519,#250520); +#250519 = CARTESIAN_POINT('',(164.679819,-44.626076,1.585)); +#250520 = VECTOR('',#250521,1.); +#250521 = DIRECTION('',(3.183719197072E-03,0.999994931953,0.)); +#250522 = ORIENTED_EDGE('',*,*,#250523,.T.); +#250523 = EDGE_CURVE('',#250516,#250524,#250526,.T.); +#250524 = VERTEX_POINT('',#250525); +#250525 = CARTESIAN_POINT('',(164.829819,-44.188095,1.585)); +#250526 = CIRCLE('',#250527,7.500006711463E-02); +#250527 = AXIS2_PLACEMENT_3D('',#250528,#250529,#250530); +#250528 = CARTESIAN_POINT('',(164.75481893288,-44.18809493288,1.585)); +#250529 = DIRECTION('',(0.,0.,-1.)); +#250530 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#250531 = ORIENTED_EDGE('',*,*,#250532,.T.); +#250532 = EDGE_CURVE('',#250524,#250533,#250535,.T.); +#250533 = VERTEX_POINT('',#250534); +#250534 = CARTESIAN_POINT('',(164.828378,-44.821774,1.585)); +#250535 = LINE('',#250536,#250537); +#250536 = CARTESIAN_POINT('',(164.829819,-44.188095,1.585)); +#250537 = VECTOR('',#250538,1.); +#250538 = DIRECTION('',(-2.274016140951E-03,-0.999997414422,0.)); +#250539 = ORIENTED_EDGE('',*,*,#250540,.T.); +#250540 = EDGE_CURVE('',#250533,#250541,#250543,.T.); +#250541 = VERTEX_POINT('',#250542); +#250542 = CARTESIAN_POINT('',(164.769451,-44.880701,1.585)); +#250543 = CIRCLE('',#250544,7.499663284007E-02); +#250544 = AXIS2_PLACEMENT_3D('',#250545,#250546,#250547); +#250545 = CARTESIAN_POINT('',(164.75482198775,-44.80714498775,1.585)); +#250546 = DIRECTION('',(0.,0.,-1.)); +#250547 = DIRECTION('',(0.980790863049,-0.195062254063,0.)); +#250548 = ORIENTED_EDGE('',*,*,#250549,.T.); +#250549 = EDGE_CURVE('',#250541,#250550,#250552,.T.); +#250550 = VERTEX_POINT('',#250551); +#250551 = CARTESIAN_POINT('',(164.732268,-44.877421,1.585)); +#250552 = LINE('',#250553,#250554); +#250553 = CARTESIAN_POINT('',(164.769451,-44.880701,1.585)); +#250554 = VECTOR('',#250555,1.); +#250555 = DIRECTION('',(-0.996131850392,8.787113652183E-02,0.)); +#250556 = ORIENTED_EDGE('',*,*,#250557,.T.); +#250557 = EDGE_CURVE('',#250550,#250558,#250560,.T.); +#250558 = VERTEX_POINT('',#250559); +#250559 = CARTESIAN_POINT('',(164.701786,-44.860175,1.585)); +#250560 = LINE('',#250561,#250562); +#250561 = CARTESIAN_POINT('',(164.732268,-44.877421,1.585)); +#250562 = VECTOR('',#250563,1.); +#250563 = DIRECTION('',(-0.870354298731,0.492426029654,0.)); +#250564 = ORIENTED_EDGE('',*,*,#250565,.T.); +#250565 = EDGE_CURVE('',#250558,#250566,#250568,.T.); +#250566 = VERTEX_POINT('',#250567); +#250567 = CARTESIAN_POINT('',(164.142876,-44.301266,1.585)); +#250568 = LINE('',#250569,#250570); +#250569 = CARTESIAN_POINT('',(164.701786,-44.860175,1.585)); +#250570 = VECTOR('',#250571,1.); +#250571 = DIRECTION('',(-0.707107413763,0.707106148609,0.)); +#250572 = ORIENTED_EDGE('',*,*,#250573,.T.); +#250573 = EDGE_CURVE('',#250566,#250574,#250576,.T.); +#250574 = VERTEX_POINT('',#250575); +#250575 = CARTESIAN_POINT('',(164.028363,-44.263095,1.585)); +#250576 = LINE('',#250577,#250578); +#250577 = CARTESIAN_POINT('',(164.142876,-44.301266,1.585)); +#250578 = VECTOR('',#250579,1.); +#250579 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#250580 = ORIENTED_EDGE('',*,*,#250581,.T.); +#250581 = EDGE_CURVE('',#250574,#250582,#250584,.T.); +#250582 = VERTEX_POINT('',#250583); +#250583 = CARTESIAN_POINT('',(163.963,-44.263095,1.585)); +#250584 = LINE('',#250585,#250586); +#250585 = CARTESIAN_POINT('',(164.028363,-44.263095,1.585)); +#250586 = VECTOR('',#250587,1.); +#250587 = DIRECTION('',(-1.,0.,0.)); +#250588 = ORIENTED_EDGE('',*,*,#250589,.T.); +#250589 = EDGE_CURVE('',#250582,#250590,#250592,.T.); +#250590 = VERTEX_POINT('',#250591); +#250591 = CARTESIAN_POINT('',(163.829819,-44.396276,1.585)); +#250592 = CIRCLE('',#250593,0.18686440374); +#250593 = AXIS2_PLACEMENT_3D('',#250594,#250595,#250596); +#250594 = CARTESIAN_POINT('',(164.010536,-44.443812,1.585)); +#250595 = DIRECTION('',(0.,0.,1.)); +#250596 = DIRECTION('',(-0.254387668538,0.967102328658,0.)); +#250597 = ORIENTED_EDGE('',*,*,#250598,.T.); +#250598 = EDGE_CURVE('',#250590,#250599,#250601,.T.); +#250599 = VERTEX_POINT('',#250600); +#250600 = CARTESIAN_POINT('',(163.829819,-44.598961,1.585)); +#250601 = LINE('',#250602,#250603); +#250602 = CARTESIAN_POINT('',(163.829819,-44.396276,1.585)); +#250603 = VECTOR('',#250604,1.); +#250604 = DIRECTION('',(0.,-1.,0.)); +#250605 = ORIENTED_EDGE('',*,*,#250606,.T.); +#250606 = EDGE_CURVE('',#250599,#250607,#250609,.T.); +#250607 = VERTEX_POINT('',#250608); +#250608 = CARTESIAN_POINT('',(163.864077,-44.667477,1.585)); +#250609 = LINE('',#250610,#250611); +#250610 = CARTESIAN_POINT('',(163.829819,-44.598961,1.585)); +#250611 = VECTOR('',#250612,1.); +#250612 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#250613 = ORIENTED_EDGE('',*,*,#250614,.T.); +#250614 = EDGE_CURVE('',#250607,#250615,#250617,.T.); +#250615 = VERTEX_POINT('',#250616); +#250616 = CARTESIAN_POINT('',(163.912417,-44.717855,1.585)); +#250617 = LINE('',#250618,#250619); +#250618 = CARTESIAN_POINT('',(163.864077,-44.667477,1.585)); +#250619 = VECTOR('',#250620,1.); +#250620 = DIRECTION('',(0.692361271629,-0.721551016594,0.)); +#250621 = ORIENTED_EDGE('',*,*,#250622,.T.); +#250622 = EDGE_CURVE('',#250615,#250623,#250625,.T.); +#250623 = VERTEX_POINT('',#250624); +#250624 = CARTESIAN_POINT('',(163.797024,-44.812556,1.585)); +#250625 = CIRCLE('',#250626,7.500003178657E-02); +#250626 = AXIS2_PLACEMENT_3D('',#250627,#250628,#250629); +#250627 = CARTESIAN_POINT('',(163.85005656212,-44.7595225,1.585)); +#250628 = DIRECTION('',(0.,0.,-1.)); +#250629 = DIRECTION('',(0.831472152581,0.555566431206,0.)); +#250630 = ORIENTED_EDGE('',*,*,#250631,.T.); +#250631 = EDGE_CURVE('',#250623,#250632,#250634,.T.); +#250632 = VERTEX_POINT('',#250633); +#250633 = CARTESIAN_POINT('',(163.735356,-44.745445,1.585)); +#250634 = LINE('',#250635,#250636); +#250635 = CARTESIAN_POINT('',(163.797024,-44.812556,1.585)); +#250636 = VECTOR('',#250637,1.); +#250637 = DIRECTION('',(-0.676615964248,0.736336089652,0.)); +#250638 = ORIENTED_EDGE('',*,*,#250639,.T.); +#250639 = EDGE_CURVE('',#250632,#250640,#250642,.T.); +#250640 = VERTEX_POINT('',#250641); +#250641 = CARTESIAN_POINT('',(163.744686,-44.236049,1.585)); +#250642 = CIRCLE('',#250643,0.450051227017); +#250643 = AXIS2_PLACEMENT_3D('',#250644,#250645,#250646); +#250644 = CARTESIAN_POINT('',(164.11097532415,-44.49754132866,1.585)); +#250645 = DIRECTION('',(0.,0.,-1.)); +#250646 = DIRECTION('',(-0.834614598528,-0.550834341634,-0.)); +#250647 = ORIENTED_EDGE('',*,*,#250648,.T.); +#250648 = EDGE_CURVE('',#250640,#250482,#250649,.T.); +#250649 = LINE('',#250650,#250651); +#250650 = CARTESIAN_POINT('',(163.744686,-44.236049,1.585)); +#250651 = VECTOR('',#250652,1.); +#250652 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#250653 = PLANE('',#250654); +#250654 = AXIS2_PLACEMENT_3D('',#250655,#250656,#250657); +#250655 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250656 = DIRECTION('',(0.,0.,1.)); +#250657 = DIRECTION('',(1.,0.,-0.)); +#250658 = SHELL_BASED_SURFACE_MODEL('',(#250659)); +#250659 = OPEN_SHELL('',(#250660)); +#250660 = ADVANCED_FACE('',(#250661),#250722,.T.); +#250661 = FACE_BOUND('',#250662,.F.); +#250662 = EDGE_LOOP('',(#250663,#250674,#250682,#250691,#250699,#250707, + #250716)); +#250663 = ORIENTED_EDGE('',*,*,#250664,.T.); +#250664 = EDGE_CURVE('',#250665,#250667,#250669,.T.); +#250665 = VERTEX_POINT('',#250666); +#250666 = CARTESIAN_POINT('',(95.28165,-43.5731,1.585)); +#250667 = VERTEX_POINT('',#250668); +#250668 = CARTESIAN_POINT('',(95.34165,-43.5131,1.585)); +#250669 = CIRCLE('',#250670,5.999932016258E-02); +#250670 = AXIS2_PLACEMENT_3D('',#250671,#250672,#250673); +#250671 = CARTESIAN_POINT('',(95.341649320159,-43.57309932015,1.585)); +#250672 = DIRECTION('',(0.,0.,-1.)); +#250673 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#250674 = ORIENTED_EDGE('',*,*,#250675,.T.); +#250675 = EDGE_CURVE('',#250667,#250676,#250678,.T.); +#250676 = VERTEX_POINT('',#250677); +#250677 = CARTESIAN_POINT('',(96.59165,-43.5131,1.585)); +#250678 = LINE('',#250679,#250680); +#250679 = CARTESIAN_POINT('',(95.34165,-43.5131,1.585)); +#250680 = VECTOR('',#250681,1.); +#250681 = DIRECTION('',(1.,0.,0.)); +#250682 = ORIENTED_EDGE('',*,*,#250683,.T.); +#250683 = EDGE_CURVE('',#250676,#250684,#250686,.T.); +#250684 = VERTEX_POINT('',#250685); +#250685 = CARTESIAN_POINT('',(96.59165,-43.6331,1.585)); +#250686 = CIRCLE('',#250687,6.000000000042E-02); +#250687 = AXIS2_PLACEMENT_3D('',#250688,#250689,#250690); +#250688 = CARTESIAN_POINT('',(96.591650225588,-43.5731,1.585)); +#250689 = DIRECTION('',(0.,0.,-1.)); +#250690 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#250691 = ORIENTED_EDGE('',*,*,#250692,.T.); +#250692 = EDGE_CURVE('',#250684,#250693,#250695,.T.); +#250693 = VERTEX_POINT('',#250694); +#250694 = CARTESIAN_POINT('',(95.40165,-43.6331,1.585)); +#250695 = LINE('',#250696,#250697); +#250696 = CARTESIAN_POINT('',(96.59165,-43.6331,1.585)); +#250697 = VECTOR('',#250698,1.); +#250698 = DIRECTION('',(-1.,0.,0.)); +#250699 = ORIENTED_EDGE('',*,*,#250700,.T.); +#250700 = EDGE_CURVE('',#250693,#250701,#250703,.T.); +#250701 = VERTEX_POINT('',#250702); +#250702 = CARTESIAN_POINT('',(95.40165,-44.8231,1.585)); +#250703 = LINE('',#250704,#250705); +#250704 = CARTESIAN_POINT('',(95.40165,-43.6331,1.585)); +#250705 = VECTOR('',#250706,1.); +#250706 = DIRECTION('',(0.,-1.,0.)); +#250707 = ORIENTED_EDGE('',*,*,#250708,.T.); +#250708 = EDGE_CURVE('',#250701,#250709,#250711,.T.); +#250709 = VERTEX_POINT('',#250710); +#250710 = CARTESIAN_POINT('',(95.28165,-44.8231,1.585)); +#250711 = CIRCLE('',#250712,6.000000000043E-02); +#250712 = AXIS2_PLACEMENT_3D('',#250713,#250714,#250715); +#250713 = CARTESIAN_POINT('',(95.34165,-44.82310022558,1.585)); +#250714 = DIRECTION('',(0.,0.,-1.)); +#250715 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#250716 = ORIENTED_EDGE('',*,*,#250717,.T.); +#250717 = EDGE_CURVE('',#250709,#250665,#250718,.T.); +#250718 = LINE('',#250719,#250720); +#250719 = CARTESIAN_POINT('',(95.28165,-44.8231,1.585)); +#250720 = VECTOR('',#250721,1.); +#250721 = DIRECTION('',(0.,1.,0.)); +#250722 = PLANE('',#250723); +#250723 = AXIS2_PLACEMENT_3D('',#250724,#250725,#250726); +#250724 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250725 = DIRECTION('',(0.,0.,1.)); +#250726 = DIRECTION('',(1.,0.,-0.)); +#250727 = SHELL_BASED_SURFACE_MODEL('',(#250728)); +#250728 = OPEN_SHELL('',(#250729)); +#250729 = ADVANCED_FACE('',(#250730),#250791,.T.); +#250730 = FACE_BOUND('',#250731,.F.); +#250731 = EDGE_LOOP('',(#250732,#250743,#250751,#250760,#250768,#250776, + #250785)); +#250732 = ORIENTED_EDGE('',*,*,#250733,.T.); +#250733 = EDGE_CURVE('',#250734,#250736,#250738,.T.); +#250734 = VERTEX_POINT('',#250735); +#250735 = CARTESIAN_POINT('',(113.28165,-43.5731,1.585)); +#250736 = VERTEX_POINT('',#250737); +#250737 = CARTESIAN_POINT('',(113.34165,-43.5131,1.585)); +#250738 = CIRCLE('',#250739,5.999932016258E-02); +#250739 = AXIS2_PLACEMENT_3D('',#250740,#250741,#250742); +#250740 = CARTESIAN_POINT('',(113.34164932015,-43.57309932015,1.585)); +#250741 = DIRECTION('',(0.,0.,-1.)); +#250742 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#250743 = ORIENTED_EDGE('',*,*,#250744,.T.); +#250744 = EDGE_CURVE('',#250736,#250745,#250747,.T.); +#250745 = VERTEX_POINT('',#250746); +#250746 = CARTESIAN_POINT('',(114.59165,-43.5131,1.585)); +#250747 = LINE('',#250748,#250749); +#250748 = CARTESIAN_POINT('',(113.34165,-43.5131,1.585)); +#250749 = VECTOR('',#250750,1.); +#250750 = DIRECTION('',(1.,0.,0.)); +#250751 = ORIENTED_EDGE('',*,*,#250752,.T.); +#250752 = EDGE_CURVE('',#250745,#250753,#250755,.T.); +#250753 = VERTEX_POINT('',#250754); +#250754 = CARTESIAN_POINT('',(114.59165,-43.6331,1.585)); +#250755 = CIRCLE('',#250756,6.000000000042E-02); +#250756 = AXIS2_PLACEMENT_3D('',#250757,#250758,#250759); +#250757 = CARTESIAN_POINT('',(114.59165022558,-43.5731,1.585)); +#250758 = DIRECTION('',(0.,0.,-1.)); +#250759 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#250760 = ORIENTED_EDGE('',*,*,#250761,.T.); +#250761 = EDGE_CURVE('',#250753,#250762,#250764,.T.); +#250762 = VERTEX_POINT('',#250763); +#250763 = CARTESIAN_POINT('',(113.40165,-43.6331,1.585)); +#250764 = LINE('',#250765,#250766); +#250765 = CARTESIAN_POINT('',(114.59165,-43.6331,1.585)); +#250766 = VECTOR('',#250767,1.); +#250767 = DIRECTION('',(-1.,0.,0.)); +#250768 = ORIENTED_EDGE('',*,*,#250769,.T.); +#250769 = EDGE_CURVE('',#250762,#250770,#250772,.T.); +#250770 = VERTEX_POINT('',#250771); +#250771 = CARTESIAN_POINT('',(113.40165,-44.8231,1.585)); +#250772 = LINE('',#250773,#250774); +#250773 = CARTESIAN_POINT('',(113.40165,-43.6331,1.585)); +#250774 = VECTOR('',#250775,1.); +#250775 = DIRECTION('',(0.,-1.,0.)); +#250776 = ORIENTED_EDGE('',*,*,#250777,.T.); +#250777 = EDGE_CURVE('',#250770,#250778,#250780,.T.); +#250778 = VERTEX_POINT('',#250779); +#250779 = CARTESIAN_POINT('',(113.28165,-44.8231,1.585)); +#250780 = CIRCLE('',#250781,6.000000000043E-02); +#250781 = AXIS2_PLACEMENT_3D('',#250782,#250783,#250784); +#250782 = CARTESIAN_POINT('',(113.34165,-44.82310022558,1.585)); +#250783 = DIRECTION('',(0.,0.,-1.)); +#250784 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#250785 = ORIENTED_EDGE('',*,*,#250786,.T.); +#250786 = EDGE_CURVE('',#250778,#250734,#250787,.T.); +#250787 = LINE('',#250788,#250789); +#250788 = CARTESIAN_POINT('',(113.28165,-44.8231,1.585)); +#250789 = VECTOR('',#250790,1.); +#250790 = DIRECTION('',(0.,1.,0.)); +#250791 = PLANE('',#250792); +#250792 = AXIS2_PLACEMENT_3D('',#250793,#250794,#250795); +#250793 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250794 = DIRECTION('',(0.,0.,1.)); +#250795 = DIRECTION('',(1.,0.,-0.)); +#250796 = SHELL_BASED_SURFACE_MODEL('',(#250797)); +#250797 = OPEN_SHELL('',(#250798)); +#250798 = ADVANCED_FACE('',(#250799),#250860,.T.); +#250799 = FACE_BOUND('',#250800,.F.); +#250800 = EDGE_LOOP('',(#250801,#250812,#250820,#250829,#250837,#250845, + #250854)); +#250801 = ORIENTED_EDGE('',*,*,#250802,.T.); +#250802 = EDGE_CURVE('',#250803,#250805,#250807,.T.); +#250803 = VERTEX_POINT('',#250804); +#250804 = CARTESIAN_POINT('',(124.28165,-43.5731,1.585)); +#250805 = VERTEX_POINT('',#250806); +#250806 = CARTESIAN_POINT('',(124.34165,-43.5131,1.585)); +#250807 = CIRCLE('',#250808,5.999932016258E-02); +#250808 = AXIS2_PLACEMENT_3D('',#250809,#250810,#250811); +#250809 = CARTESIAN_POINT('',(124.34164932015,-43.57309932015,1.585)); +#250810 = DIRECTION('',(0.,0.,-1.)); +#250811 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#250812 = ORIENTED_EDGE('',*,*,#250813,.T.); +#250813 = EDGE_CURVE('',#250805,#250814,#250816,.T.); +#250814 = VERTEX_POINT('',#250815); +#250815 = CARTESIAN_POINT('',(125.59165,-43.5131,1.585)); +#250816 = LINE('',#250817,#250818); +#250817 = CARTESIAN_POINT('',(124.34165,-43.5131,1.585)); +#250818 = VECTOR('',#250819,1.); +#250819 = DIRECTION('',(1.,0.,0.)); +#250820 = ORIENTED_EDGE('',*,*,#250821,.T.); +#250821 = EDGE_CURVE('',#250814,#250822,#250824,.T.); +#250822 = VERTEX_POINT('',#250823); +#250823 = CARTESIAN_POINT('',(125.59165,-43.6331,1.585)); +#250824 = CIRCLE('',#250825,6.000000000042E-02); +#250825 = AXIS2_PLACEMENT_3D('',#250826,#250827,#250828); +#250826 = CARTESIAN_POINT('',(125.59165022558,-43.5731,1.585)); +#250827 = DIRECTION('',(0.,0.,-1.)); +#250828 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#250829 = ORIENTED_EDGE('',*,*,#250830,.T.); +#250830 = EDGE_CURVE('',#250822,#250831,#250833,.T.); +#250831 = VERTEX_POINT('',#250832); +#250832 = CARTESIAN_POINT('',(124.40165,-43.6331,1.585)); +#250833 = LINE('',#250834,#250835); +#250834 = CARTESIAN_POINT('',(125.59165,-43.6331,1.585)); +#250835 = VECTOR('',#250836,1.); +#250836 = DIRECTION('',(-1.,0.,0.)); +#250837 = ORIENTED_EDGE('',*,*,#250838,.T.); +#250838 = EDGE_CURVE('',#250831,#250839,#250841,.T.); +#250839 = VERTEX_POINT('',#250840); +#250840 = CARTESIAN_POINT('',(124.40165,-44.8231,1.585)); +#250841 = LINE('',#250842,#250843); +#250842 = CARTESIAN_POINT('',(124.40165,-43.6331,1.585)); +#250843 = VECTOR('',#250844,1.); +#250844 = DIRECTION('',(0.,-1.,0.)); +#250845 = ORIENTED_EDGE('',*,*,#250846,.T.); +#250846 = EDGE_CURVE('',#250839,#250847,#250849,.T.); +#250847 = VERTEX_POINT('',#250848); +#250848 = CARTESIAN_POINT('',(124.28165,-44.8231,1.585)); +#250849 = CIRCLE('',#250850,6.000000000043E-02); +#250850 = AXIS2_PLACEMENT_3D('',#250851,#250852,#250853); +#250851 = CARTESIAN_POINT('',(124.34165,-44.82310022558,1.585)); +#250852 = DIRECTION('',(0.,0.,-1.)); +#250853 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#250854 = ORIENTED_EDGE('',*,*,#250855,.T.); +#250855 = EDGE_CURVE('',#250847,#250803,#250856,.T.); +#250856 = LINE('',#250857,#250858); +#250857 = CARTESIAN_POINT('',(124.28165,-44.8231,1.585)); +#250858 = VECTOR('',#250859,1.); +#250859 = DIRECTION('',(0.,1.,0.)); +#250860 = PLANE('',#250861); +#250861 = AXIS2_PLACEMENT_3D('',#250862,#250863,#250864); +#250862 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250863 = DIRECTION('',(0.,0.,1.)); +#250864 = DIRECTION('',(1.,0.,-0.)); +#250865 = SHELL_BASED_SURFACE_MODEL('',(#250866)); +#250866 = OPEN_SHELL('',(#250867)); +#250867 = ADVANCED_FACE('',(#250868),#250929,.T.); +#250868 = FACE_BOUND('',#250869,.F.); +#250869 = EDGE_LOOP('',(#250870,#250881,#250889,#250898,#250906,#250914, + #250923)); +#250870 = ORIENTED_EDGE('',*,*,#250871,.T.); +#250871 = EDGE_CURVE('',#250872,#250874,#250876,.T.); +#250872 = VERTEX_POINT('',#250873); +#250873 = CARTESIAN_POINT('',(132.88165,-43.5731,1.585)); +#250874 = VERTEX_POINT('',#250875); +#250875 = CARTESIAN_POINT('',(132.94165,-43.5131,1.585)); +#250876 = CIRCLE('',#250877,5.999932016251E-02); +#250877 = AXIS2_PLACEMENT_3D('',#250878,#250879,#250880); +#250878 = CARTESIAN_POINT('',(132.94164932015,-43.57309932015,1.585)); +#250879 = DIRECTION('',(0.,0.,-1.)); +#250880 = DIRECTION('',(-0.999999999936,-1.133081695042E-05,-0.)); +#250881 = ORIENTED_EDGE('',*,*,#250882,.T.); +#250882 = EDGE_CURVE('',#250874,#250883,#250885,.T.); +#250883 = VERTEX_POINT('',#250884); +#250884 = CARTESIAN_POINT('',(134.19165,-43.5131,1.585)); +#250885 = LINE('',#250886,#250887); +#250886 = CARTESIAN_POINT('',(132.94165,-43.5131,1.585)); +#250887 = VECTOR('',#250888,1.); +#250888 = DIRECTION('',(1.,0.,0.)); +#250889 = ORIENTED_EDGE('',*,*,#250890,.T.); +#250890 = EDGE_CURVE('',#250883,#250891,#250893,.T.); +#250891 = VERTEX_POINT('',#250892); +#250892 = CARTESIAN_POINT('',(134.19165,-43.6331,1.585)); +#250893 = CIRCLE('',#250894,6.000000000042E-02); +#250894 = AXIS2_PLACEMENT_3D('',#250895,#250896,#250897); +#250895 = CARTESIAN_POINT('',(134.19165022558,-43.5731,1.585)); +#250896 = DIRECTION('',(0.,0.,-1.)); +#250897 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#250898 = ORIENTED_EDGE('',*,*,#250899,.T.); +#250899 = EDGE_CURVE('',#250891,#250900,#250902,.T.); +#250900 = VERTEX_POINT('',#250901); +#250901 = CARTESIAN_POINT('',(133.00165,-43.6331,1.585)); +#250902 = LINE('',#250903,#250904); +#250903 = CARTESIAN_POINT('',(134.19165,-43.6331,1.585)); +#250904 = VECTOR('',#250905,1.); +#250905 = DIRECTION('',(-1.,0.,0.)); +#250906 = ORIENTED_EDGE('',*,*,#250907,.T.); +#250907 = EDGE_CURVE('',#250900,#250908,#250910,.T.); +#250908 = VERTEX_POINT('',#250909); +#250909 = CARTESIAN_POINT('',(133.00165,-44.8231,1.585)); +#250910 = LINE('',#250911,#250912); +#250911 = CARTESIAN_POINT('',(133.00165,-43.6331,1.585)); +#250912 = VECTOR('',#250913,1.); +#250913 = DIRECTION('',(0.,-1.,0.)); +#250914 = ORIENTED_EDGE('',*,*,#250915,.T.); +#250915 = EDGE_CURVE('',#250908,#250916,#250918,.T.); +#250916 = VERTEX_POINT('',#250917); +#250917 = CARTESIAN_POINT('',(132.88165,-44.8231,1.585)); +#250918 = CIRCLE('',#250919,6.000000000042E-02); +#250919 = AXIS2_PLACEMENT_3D('',#250920,#250921,#250922); +#250920 = CARTESIAN_POINT('',(132.94165,-44.82310022558,1.585)); +#250921 = DIRECTION('',(0.,0.,-1.)); +#250922 = DIRECTION('',(0.999999999993,3.759793898414E-06,0.)); +#250923 = ORIENTED_EDGE('',*,*,#250924,.T.); +#250924 = EDGE_CURVE('',#250916,#250872,#250925,.T.); +#250925 = LINE('',#250926,#250927); +#250926 = CARTESIAN_POINT('',(132.88165,-44.8231,1.585)); +#250927 = VECTOR('',#250928,1.); +#250928 = DIRECTION('',(0.,1.,0.)); +#250929 = PLANE('',#250930); +#250930 = AXIS2_PLACEMENT_3D('',#250931,#250932,#250933); +#250931 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250932 = DIRECTION('',(0.,0.,1.)); +#250933 = DIRECTION('',(1.,0.,-0.)); +#250934 = SHELL_BASED_SURFACE_MODEL('',(#250935)); +#250935 = OPEN_SHELL('',(#250936)); +#250936 = ADVANCED_FACE('',(#250937),#250973,.T.); +#250937 = FACE_BOUND('',#250938,.F.); +#250938 = EDGE_LOOP('',(#250939,#250950,#250958,#250967)); +#250939 = ORIENTED_EDGE('',*,*,#250940,.T.); +#250940 = EDGE_CURVE('',#250941,#250943,#250945,.T.); +#250941 = VERTEX_POINT('',#250942); +#250942 = CARTESIAN_POINT('',(168.27607,-44.8731,1.585)); +#250943 = VERTEX_POINT('',#250944); +#250944 = CARTESIAN_POINT('',(168.27607,-44.7531,1.585)); +#250945 = CIRCLE('',#250946,6.000000000042E-02); +#250946 = AXIS2_PLACEMENT_3D('',#250947,#250948,#250949); +#250947 = CARTESIAN_POINT('',(168.27606977441,-44.8131,1.585)); +#250948 = DIRECTION('',(0.,0.,-1.)); +#250949 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#250950 = ORIENTED_EDGE('',*,*,#250951,.T.); +#250951 = EDGE_CURVE('',#250943,#250952,#250954,.T.); +#250952 = VERTEX_POINT('',#250953); +#250953 = CARTESIAN_POINT('',(168.55723,-44.7531,1.585)); +#250954 = LINE('',#250955,#250956); +#250955 = CARTESIAN_POINT('',(168.27607,-44.7531,1.585)); +#250956 = VECTOR('',#250957,1.); +#250957 = DIRECTION('',(1.,0.,0.)); +#250958 = ORIENTED_EDGE('',*,*,#250959,.T.); +#250959 = EDGE_CURVE('',#250952,#250960,#250962,.T.); +#250960 = VERTEX_POINT('',#250961); +#250961 = CARTESIAN_POINT('',(168.55723,-44.8731,1.585)); +#250962 = CIRCLE('',#250963,6.000000000043E-02); +#250963 = AXIS2_PLACEMENT_3D('',#250964,#250965,#250966); +#250964 = CARTESIAN_POINT('',(168.55723022558,-44.8131,1.585)); +#250965 = DIRECTION('',(0.,0.,-1.)); +#250966 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#250967 = ORIENTED_EDGE('',*,*,#250968,.T.); +#250968 = EDGE_CURVE('',#250960,#250941,#250969,.T.); +#250969 = LINE('',#250970,#250971); +#250970 = CARTESIAN_POINT('',(168.55723,-44.8731,1.585)); +#250971 = VECTOR('',#250972,1.); +#250972 = DIRECTION('',(-1.,0.,0.)); +#250973 = PLANE('',#250974); +#250974 = AXIS2_PLACEMENT_3D('',#250975,#250976,#250977); +#250975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#250976 = DIRECTION('',(0.,0.,1.)); +#250977 = DIRECTION('',(1.,0.,-0.)); +#250978 = SHELL_BASED_SURFACE_MODEL('',(#250979)); +#250979 = OPEN_SHELL('',(#250980)); +#250980 = ADVANCED_FACE('',(#250981),#251017,.T.); +#250981 = FACE_BOUND('',#250982,.F.); +#250982 = EDGE_LOOP('',(#250983,#250994,#251002,#251011)); +#250983 = ORIENTED_EDGE('',*,*,#250984,.T.); +#250984 = EDGE_CURVE('',#250985,#250987,#250989,.T.); +#250985 = VERTEX_POINT('',#250986); +#250986 = CARTESIAN_POINT('',(173.629392,-44.8606,1.585)); +#250987 = VERTEX_POINT('',#250988); +#250988 = CARTESIAN_POINT('',(173.629392,-44.7406,1.585)); +#250989 = CIRCLE('',#250990,6.000000000042E-02); +#250990 = AXIS2_PLACEMENT_3D('',#250991,#250992,#250993); +#250991 = CARTESIAN_POINT('',(173.62939177441,-44.8006,1.585)); +#250992 = DIRECTION('',(0.,0.,-1.)); +#250993 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#250994 = ORIENTED_EDGE('',*,*,#250995,.T.); +#250995 = EDGE_CURVE('',#250987,#250996,#250998,.T.); +#250996 = VERTEX_POINT('',#250997); +#250997 = CARTESIAN_POINT('',(174.103908,-44.7406,1.585)); +#250998 = LINE('',#250999,#251000); +#250999 = CARTESIAN_POINT('',(173.629392,-44.7406,1.585)); +#251000 = VECTOR('',#251001,1.); +#251001 = DIRECTION('',(1.,0.,0.)); +#251002 = ORIENTED_EDGE('',*,*,#251003,.T.); +#251003 = EDGE_CURVE('',#250996,#251004,#251006,.T.); +#251004 = VERTEX_POINT('',#251005); +#251005 = CARTESIAN_POINT('',(174.103908,-44.8606,1.585)); +#251006 = CIRCLE('',#251007,6.000000000043E-02); +#251007 = AXIS2_PLACEMENT_3D('',#251008,#251009,#251010); +#251008 = CARTESIAN_POINT('',(174.10390822558,-44.8006,1.585)); +#251009 = DIRECTION('',(0.,0.,-1.)); +#251010 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#251011 = ORIENTED_EDGE('',*,*,#251012,.T.); +#251012 = EDGE_CURVE('',#251004,#250985,#251013,.T.); +#251013 = LINE('',#251014,#251015); +#251014 = CARTESIAN_POINT('',(174.103908,-44.8606,1.585)); +#251015 = VECTOR('',#251016,1.); +#251016 = DIRECTION('',(-1.,0.,0.)); +#251017 = PLANE('',#251018); +#251018 = AXIS2_PLACEMENT_3D('',#251019,#251020,#251021); +#251019 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251020 = DIRECTION('',(0.,0.,1.)); +#251021 = DIRECTION('',(1.,0.,-0.)); +#251022 = SHELL_BASED_SURFACE_MODEL('',(#251023)); +#251023 = OPEN_SHELL('',(#251024)); +#251024 = ADVANCED_FACE('',(#251025),#251061,.T.); +#251025 = FACE_BOUND('',#251026,.F.); +#251026 = EDGE_LOOP('',(#251027,#251038,#251046,#251055)); +#251027 = ORIENTED_EDGE('',*,*,#251028,.T.); +#251028 = EDGE_CURVE('',#251029,#251031,#251033,.T.); +#251029 = VERTEX_POINT('',#251030); +#251030 = CARTESIAN_POINT('',(176.854392,-44.8606,1.585)); +#251031 = VERTEX_POINT('',#251032); +#251032 = CARTESIAN_POINT('',(176.854392,-44.7406,1.585)); +#251033 = CIRCLE('',#251034,6.000000000042E-02); +#251034 = AXIS2_PLACEMENT_3D('',#251035,#251036,#251037); +#251035 = CARTESIAN_POINT('',(176.85439177441,-44.8006,1.585)); +#251036 = DIRECTION('',(0.,0.,-1.)); +#251037 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#251038 = ORIENTED_EDGE('',*,*,#251039,.T.); +#251039 = EDGE_CURVE('',#251031,#251040,#251042,.T.); +#251040 = VERTEX_POINT('',#251041); +#251041 = CARTESIAN_POINT('',(177.328908,-44.7406,1.585)); +#251042 = LINE('',#251043,#251044); +#251043 = CARTESIAN_POINT('',(176.854392,-44.7406,1.585)); +#251044 = VECTOR('',#251045,1.); +#251045 = DIRECTION('',(1.,0.,0.)); +#251046 = ORIENTED_EDGE('',*,*,#251047,.T.); +#251047 = EDGE_CURVE('',#251040,#251048,#251050,.T.); +#251048 = VERTEX_POINT('',#251049); +#251049 = CARTESIAN_POINT('',(177.328908,-44.8606,1.585)); +#251050 = CIRCLE('',#251051,6.000000000043E-02); +#251051 = AXIS2_PLACEMENT_3D('',#251052,#251053,#251054); +#251052 = CARTESIAN_POINT('',(177.32890822558,-44.8006,1.585)); +#251053 = DIRECTION('',(0.,0.,-1.)); +#251054 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#251055 = ORIENTED_EDGE('',*,*,#251056,.T.); +#251056 = EDGE_CURVE('',#251048,#251029,#251057,.T.); +#251057 = LINE('',#251058,#251059); +#251058 = CARTESIAN_POINT('',(177.328908,-44.8606,1.585)); +#251059 = VECTOR('',#251060,1.); +#251060 = DIRECTION('',(-1.,0.,0.)); +#251061 = PLANE('',#251062); +#251062 = AXIS2_PLACEMENT_3D('',#251063,#251064,#251065); +#251063 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251064 = DIRECTION('',(0.,0.,1.)); +#251065 = DIRECTION('',(1.,0.,-0.)); +#251066 = SHELL_BASED_SURFACE_MODEL('',(#251067)); +#251067 = OPEN_SHELL('',(#251068)); +#251068 = ADVANCED_FACE('',(#251069),#251254,.T.); +#251069 = FACE_BOUND('',#251070,.F.); +#251070 = EDGE_LOOP('',(#251071,#251082,#251090,#251099,#251107,#251116, + #251124,#251132,#251140,#251149,#251157,#251166,#251174,#251183, + #251191,#251199,#251207,#251215,#251223,#251231,#251239,#251248)); +#251071 = ORIENTED_EDGE('',*,*,#251072,.T.); +#251072 = EDGE_CURVE('',#251073,#251075,#251077,.T.); +#251073 = VERTEX_POINT('',#251074); +#251074 = CARTESIAN_POINT('',(156.608389,-44.054306,1.585)); +#251075 = VERTEX_POINT('',#251076); +#251076 = CARTESIAN_POINT('',(156.70309,-44.169699,1.585)); +#251077 = CIRCLE('',#251078,7.500003178656E-02); +#251078 = AXIS2_PLACEMENT_3D('',#251079,#251080,#251081); +#251079 = CARTESIAN_POINT('',(156.6500565,-44.11666643787,1.585)); +#251080 = DIRECTION('',(0.,0.,-1.)); +#251081 = DIRECTION('',(-0.555566431206,0.83147215258,0.)); +#251082 = ORIENTED_EDGE('',*,*,#251083,.T.); +#251083 = EDGE_CURVE('',#251075,#251084,#251086,.T.); +#251084 = VERTEX_POINT('',#251085); +#251085 = CARTESIAN_POINT('',(156.66799,-44.204798,1.585)); +#251086 = LINE('',#251087,#251088); +#251087 = CARTESIAN_POINT('',(156.70309,-44.169699,1.585)); +#251088 = VECTOR('',#251089,1.); +#251089 = DIRECTION('',(-0.707116854005,-0.707096708225,0.)); +#251090 = ORIENTED_EDGE('',*,*,#251091,.T.); +#251091 = EDGE_CURVE('',#251084,#251092,#251094,.T.); +#251092 = VERTEX_POINT('',#251093); +#251093 = CARTESIAN_POINT('',(156.66799,-44.504723,1.585)); +#251094 = CIRCLE('',#251095,0.299310989749); +#251095 = AXIS2_PLACEMENT_3D('',#251096,#251097,#251098); +#251096 = CARTESIAN_POINT('',(156.92702342868,-44.3547605,1.585)); +#251097 = DIRECTION('',(0.,0.,1.)); +#251098 = DIRECTION('',(-0.865432401617,0.501025706158,0.)); +#251099 = ORIENTED_EDGE('',*,*,#251100,.T.); +#251100 = EDGE_CURVE('',#251092,#251101,#251103,.T.); +#251101 = VERTEX_POINT('',#251102); +#251102 = CARTESIAN_POINT('',(156.742103,-44.578836,1.585)); +#251103 = LINE('',#251104,#251105); +#251104 = CARTESIAN_POINT('',(156.66799,-44.504723,1.585)); +#251105 = VECTOR('',#251106,1.); +#251106 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#251107 = ORIENTED_EDGE('',*,*,#251108,.T.); +#251108 = EDGE_CURVE('',#251101,#251109,#251111,.T.); +#251109 = VERTEX_POINT('',#251110); +#251110 = CARTESIAN_POINT('',(157.117013,-44.660713,1.585)); +#251111 = CIRCLE('',#251112,0.611738044646); +#251112 = AXIS2_PLACEMENT_3D('',#251113,#251114,#251115); +#251113 = CARTESIAN_POINT('',(157.05349337395,-44.05228166256,1.585)); +#251114 = DIRECTION('',(0.,0.,1.)); +#251115 = DIRECTION('',(-0.509025679674,-0.860751333099,0.)); +#251116 = ORIENTED_EDGE('',*,*,#251117,.T.); +#251117 = EDGE_CURVE('',#251109,#251118,#251120,.T.); +#251118 = VERTEX_POINT('',#251119); +#251119 = CARTESIAN_POINT('',(157.290547,-44.617329,1.585)); +#251120 = LINE('',#251121,#251122); +#251121 = CARTESIAN_POINT('',(157.117013,-44.660713,1.585)); +#251122 = VECTOR('',#251123,1.); +#251123 = DIRECTION('',(0.970141842436,0.242538255859,0.)); +#251124 = ORIENTED_EDGE('',*,*,#251125,.T.); +#251125 = EDGE_CURVE('',#251118,#251126,#251128,.T.); +#251126 = VERTEX_POINT('',#251127); +#251127 = CARTESIAN_POINT('',(157.367534,-44.578835,1.585)); +#251128 = LINE('',#251129,#251130); +#251129 = CARTESIAN_POINT('',(157.290547,-44.617329,1.585)); +#251130 = VECTOR('',#251131,1.); +#251131 = DIRECTION('',(0.894424867414,0.447218242641,0.)); +#251132 = ORIENTED_EDGE('',*,*,#251133,.T.); +#251133 = EDGE_CURVE('',#251126,#251134,#251136,.T.); +#251134 = VERTEX_POINT('',#251135); +#251135 = CARTESIAN_POINT('',(157.441648,-44.504722,1.585)); +#251136 = LINE('',#251137,#251138); +#251137 = CARTESIAN_POINT('',(157.367534,-44.578835,1.585)); +#251138 = VECTOR('',#251139,1.); +#251139 = DIRECTION('',(0.707111551602,0.707102010739,0.)); +#251140 = ORIENTED_EDGE('',*,*,#251141,.T.); +#251141 = EDGE_CURVE('',#251134,#251142,#251144,.T.); +#251142 = VERTEX_POINT('',#251143); +#251143 = CARTESIAN_POINT('',(157.441648,-44.204799,1.585)); +#251144 = CIRCLE('',#251145,0.299306284995); +#251145 = AXIS2_PLACEMENT_3D('',#251146,#251147,#251148); +#251146 = CARTESIAN_POINT('',(157.18261942868,-44.3547605,1.585)); +#251147 = DIRECTION('',(0.,-0.,1.)); +#251148 = DIRECTION('',(0.865429776441,-0.501030240653,-0.)); +#251149 = ORIENTED_EDGE('',*,*,#251150,.T.); +#251150 = EDGE_CURVE('',#251142,#251151,#251153,.T.); +#251151 = VERTEX_POINT('',#251152); +#251152 = CARTESIAN_POINT('',(157.39722,-44.158334,1.585)); +#251153 = LINE('',#251154,#251155); +#251154 = CARTESIAN_POINT('',(157.441648,-44.204799,1.585)); +#251155 = VECTOR('',#251156,1.); +#251156 = DIRECTION('',(-0.691086306874,0.72277224383,0.)); +#251157 = ORIENTED_EDGE('',*,*,#251158,.T.); +#251158 = EDGE_CURVE('',#251151,#251159,#251161,.T.); +#251159 = VERTEX_POINT('',#251160); +#251160 = CARTESIAN_POINT('',(157.512612,-44.063632,1.585)); +#251161 = CIRCLE('',#251162,7.499993690526E-02); +#251162 = AXIS2_PLACEMENT_3D('',#251163,#251164,#251165); +#251163 = CARTESIAN_POINT('',(157.45957982375,-44.11666575169,1.585)); +#251164 = DIRECTION('',(0.,0.,-1.)); +#251165 = DIRECTION('',(-0.831465016204,-0.555577111505,-0.)); +#251166 = ORIENTED_EDGE('',*,*,#251167,.T.); +#251167 = EDGE_CURVE('',#251159,#251168,#251170,.T.); +#251168 = VERTEX_POINT('',#251169); +#251169 = CARTESIAN_POINT('',(157.572357,-44.127142,1.585)); +#251170 = LINE('',#251171,#251172); +#251171 = CARTESIAN_POINT('',(157.512612,-44.063632,1.585)); +#251172 = VECTOR('',#251173,1.); +#251173 = DIRECTION('',(0.685187600358,-0.72836663317,0.)); +#251174 = ORIENTED_EDGE('',*,*,#251175,.T.); +#251175 = EDGE_CURVE('',#251168,#251176,#251178,.T.); +#251176 = VERTEX_POINT('',#251177); +#251177 = CARTESIAN_POINT('',(157.569561,-44.586905,1.585)); +#251178 = CIRCLE('',#251179,0.461068563463); +#251179 = AXIS2_PLACEMENT_3D('',#251180,#251181,#251182); +#251180 = CARTESIAN_POINT('',(157.17129557362,-44.35459298919,1.585)); +#251181 = DIRECTION('',(0.,0.,-1.)); +#251182 = DIRECTION('',(0.869852031044,0.493312724435,0.)); +#251183 = ORIENTED_EDGE('',*,*,#251184,.T.); +#251184 = EDGE_CURVE('',#251176,#251185,#251187,.T.); +#251185 = VERTEX_POINT('',#251186); +#251186 = CARTESIAN_POINT('',(157.451798,-44.703593,1.585)); +#251187 = LINE('',#251188,#251189); +#251188 = CARTESIAN_POINT('',(157.569561,-44.586905,1.585)); +#251189 = VECTOR('',#251190,1.); +#251190 = DIRECTION('',(-0.710341525922,-0.703857170561,0.)); +#251191 = ORIENTED_EDGE('',*,*,#251192,.T.); +#251192 = EDGE_CURVE('',#251185,#251193,#251195,.T.); +#251193 = VERTEX_POINT('',#251194); +#251194 = CARTESIAN_POINT('',(157.334913,-44.760855,1.585)); +#251195 = LINE('',#251196,#251197); +#251196 = CARTESIAN_POINT('',(157.451798,-44.703593,1.585)); +#251197 = VECTOR('',#251198,1.); +#251198 = DIRECTION('',(-0.898025665436,-0.439943069292,0.)); +#251199 = ORIENTED_EDGE('',*,*,#251200,.T.); +#251200 = EDGE_CURVE('',#251193,#251201,#251203,.T.); +#251201 = VERTEX_POINT('',#251202); +#251202 = CARTESIAN_POINT('',(157.126247,-44.810713,1.585)); +#251203 = LINE('',#251204,#251205); +#251204 = CARTESIAN_POINT('',(157.334913,-44.760855,1.585)); +#251205 = VECTOR('',#251206,1.); +#251206 = DIRECTION('',(-0.972621461126,-0.232395123349,0.)); +#251207 = ORIENTED_EDGE('',*,*,#251208,.T.); +#251208 = EDGE_CURVE('',#251201,#251209,#251211,.T.); +#251209 = VERTEX_POINT('',#251210); +#251210 = CARTESIAN_POINT('',(156.9652,-44.808474,1.585)); +#251211 = LINE('',#251212,#251213); +#251212 = CARTESIAN_POINT('',(157.126247,-44.810713,1.585)); +#251213 = VECTOR('',#251214,1.); +#251214 = DIRECTION('',(-0.999903370449,1.390143030568E-02,0.)); +#251215 = ORIENTED_EDGE('',*,*,#251216,.T.); +#251216 = EDGE_CURVE('',#251209,#251217,#251219,.T.); +#251217 = VERTEX_POINT('',#251218); +#251218 = CARTESIAN_POINT('',(156.759373,-44.755176,1.585)); +#251219 = LINE('',#251220,#251221); +#251220 = CARTESIAN_POINT('',(156.9652,-44.808474,1.585)); +#251221 = VECTOR('',#251222,1.); +#251222 = DIRECTION('',(-0.968070616292,0.250677645339,0.)); +#251223 = ORIENTED_EDGE('',*,*,#251224,.T.); +#251224 = EDGE_CURVE('',#251217,#251225,#251227,.T.); +#251225 = VERTEX_POINT('',#251226); +#251226 = CARTESIAN_POINT('',(156.650393,-44.698228,1.585)); +#251227 = LINE('',#251228,#251229); +#251228 = CARTESIAN_POINT('',(156.759373,-44.755176,1.585)); +#251229 = VECTOR('',#251230,1.); +#251230 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#251231 = ORIENTED_EDGE('',*,*,#251232,.T.); +#251232 = EDGE_CURVE('',#251225,#251233,#251235,.T.); +#251233 = VERTEX_POINT('',#251234); +#251234 = CARTESIAN_POINT('',(156.537281,-44.582379,1.585)); +#251235 = LINE('',#251236,#251237); +#251236 = CARTESIAN_POINT('',(156.650393,-44.698228,1.585)); +#251237 = VECTOR('',#251238,1.); +#251238 = DIRECTION('',(-0.698604113258,0.715508415701,0.)); +#251239 = ORIENTED_EDGE('',*,*,#251240,.T.); +#251240 = EDGE_CURVE('',#251233,#251241,#251243,.T.); +#251241 = VERTEX_POINT('',#251242); +#251242 = CARTESIAN_POINT('',(156.540078,-44.122617,1.585)); +#251243 = CIRCLE('',#251244,0.461058290907); +#251244 = AXIS2_PLACEMENT_3D('',#251245,#251246,#251247); +#251245 = CARTESIAN_POINT('',(156.93833135644,-44.35492931499,1.585)); +#251246 = DIRECTION('',(0.,0.,-1.)); +#251247 = DIRECTION('',(-0.869847401842,-0.493320886958,-0.)); +#251248 = ORIENTED_EDGE('',*,*,#251249,.T.); +#251249 = EDGE_CURVE('',#251241,#251073,#251250,.T.); +#251250 = LINE('',#251251,#251252); +#251251 = CARTESIAN_POINT('',(156.540078,-44.122617,1.585)); +#251252 = VECTOR('',#251253,1.); +#251253 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251254 = PLANE('',#251255); +#251255 = AXIS2_PLACEMENT_3D('',#251256,#251257,#251258); +#251256 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251257 = DIRECTION('',(0.,0.,1.)); +#251258 = DIRECTION('',(1.,0.,-0.)); +#251259 = SHELL_BASED_SURFACE_MODEL('',(#251260)); +#251260 = OPEN_SHELL('',(#251261)); +#251261 = ADVANCED_FACE('',(#251262),#251298,.T.); +#251262 = FACE_BOUND('',#251263,.F.); +#251263 = EDGE_LOOP('',(#251264,#251275,#251283,#251292)); +#251264 = ORIENTED_EDGE('',*,*,#251265,.T.); +#251265 = EDGE_CURVE('',#251266,#251268,#251270,.T.); +#251266 = VERTEX_POINT('',#251267); +#251267 = CARTESIAN_POINT('',(145.805398,-44.6731,1.585)); +#251268 = VERTEX_POINT('',#251269); +#251269 = CARTESIAN_POINT('',(145.805398,-44.5531,1.585)); +#251270 = CIRCLE('',#251271,6.000000000042E-02); +#251271 = AXIS2_PLACEMENT_3D('',#251272,#251273,#251274); +#251272 = CARTESIAN_POINT('',(145.80539777441,-44.6131,1.585)); +#251273 = DIRECTION('',(0.,0.,-1.)); +#251274 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#251275 = ORIENTED_EDGE('',*,*,#251276,.T.); +#251276 = EDGE_CURVE('',#251268,#251277,#251279,.T.); +#251277 = VERTEX_POINT('',#251278); +#251278 = CARTESIAN_POINT('',(148.577902,-44.5531,1.585)); +#251279 = LINE('',#251280,#251281); +#251280 = CARTESIAN_POINT('',(145.805398,-44.5531,1.585)); +#251281 = VECTOR('',#251282,1.); +#251282 = DIRECTION('',(1.,0.,0.)); +#251283 = ORIENTED_EDGE('',*,*,#251284,.T.); +#251284 = EDGE_CURVE('',#251277,#251285,#251287,.T.); +#251285 = VERTEX_POINT('',#251286); +#251286 = CARTESIAN_POINT('',(148.577902,-44.6731,1.585)); +#251287 = CIRCLE('',#251288,6.000000000043E-02); +#251288 = AXIS2_PLACEMENT_3D('',#251289,#251290,#251291); +#251289 = CARTESIAN_POINT('',(148.57790222558,-44.6131,1.585)); +#251290 = DIRECTION('',(0.,0.,-1.)); +#251291 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#251292 = ORIENTED_EDGE('',*,*,#251293,.T.); +#251293 = EDGE_CURVE('',#251285,#251266,#251294,.T.); +#251294 = LINE('',#251295,#251296); +#251295 = CARTESIAN_POINT('',(148.577902,-44.6731,1.585)); +#251296 = VECTOR('',#251297,1.); +#251297 = DIRECTION('',(-1.,0.,0.)); +#251298 = PLANE('',#251299); +#251299 = AXIS2_PLACEMENT_3D('',#251300,#251301,#251302); +#251300 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251301 = DIRECTION('',(0.,0.,1.)); +#251302 = DIRECTION('',(1.,0.,-0.)); +#251303 = SHELL_BASED_SURFACE_MODEL('',(#251304)); +#251304 = OPEN_SHELL('',(#251305)); +#251305 = ADVANCED_FACE('',(#251306),#251424,.T.); +#251306 = FACE_BOUND('',#251307,.F.); +#251307 = EDGE_LOOP('',(#251308,#251319,#251327,#251335,#251343,#251352, + #251360,#251369,#251377,#251385,#251393,#251402,#251410,#251418)); +#251308 = ORIENTED_EDGE('',*,*,#251309,.T.); +#251309 = EDGE_CURVE('',#251310,#251312,#251314,.T.); +#251310 = VERTEX_POINT('',#251311); +#251311 = CARTESIAN_POINT('',(110.388077,-43.335559,1.585)); +#251312 = VERTEX_POINT('',#251313); +#251313 = CARTESIAN_POINT('',(110.504745,-43.397919,1.585)); +#251314 = CIRCLE('',#251315,7.500000000003E-02); +#251315 = AXIS2_PLACEMENT_3D('',#251316,#251317,#251318); +#251316 = CARTESIAN_POINT('',(110.429745,-43.39791906555,1.585)); +#251317 = DIRECTION('',(0.,0.,-1.)); +#251318 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#251319 = ORIENTED_EDGE('',*,*,#251320,.T.); +#251320 = EDGE_CURVE('',#251312,#251321,#251323,.T.); +#251321 = VERTEX_POINT('',#251322); +#251322 = CARTESIAN_POINT('',(110.504745,-43.799109,1.585)); +#251323 = LINE('',#251324,#251325); +#251324 = CARTESIAN_POINT('',(110.504745,-43.397919,1.585)); +#251325 = VECTOR('',#251326,1.); +#251326 = DIRECTION('',(0.,-1.,0.)); +#251327 = ORIENTED_EDGE('',*,*,#251328,.T.); +#251328 = EDGE_CURVE('',#251321,#251329,#251331,.T.); +#251329 = VERTEX_POINT('',#251330); +#251330 = CARTESIAN_POINT('',(110.926173,-43.799109,1.585)); +#251331 = LINE('',#251332,#251333); +#251332 = CARTESIAN_POINT('',(110.504745,-43.799109,1.585)); +#251333 = VECTOR('',#251334,1.); +#251334 = DIRECTION('',(1.,0.,0.)); +#251335 = ORIENTED_EDGE('',*,*,#251336,.T.); +#251336 = EDGE_CURVE('',#251329,#251337,#251339,.T.); +#251337 = VERTEX_POINT('',#251338); +#251338 = CARTESIAN_POINT('',(110.927614,-43.383287,1.585)); +#251339 = LINE('',#251340,#251341); +#251340 = CARTESIAN_POINT('',(110.926173,-43.799109,1.585)); +#251341 = VECTOR('',#251342,1.); +#251342 = DIRECTION('',(3.465404301528E-03,0.999993995468,0.)); +#251343 = ORIENTED_EDGE('',*,*,#251344,.T.); +#251344 = EDGE_CURVE('',#251337,#251345,#251347,.T.); +#251345 = VERTEX_POINT('',#251346); +#251346 = CARTESIAN_POINT('',(111.076173,-43.397919,1.585)); +#251347 = CIRCLE('',#251348,7.500006711463E-02); +#251348 = AXIS2_PLACEMENT_3D('',#251349,#251350,#251351); +#251349 = CARTESIAN_POINT('',(111.00117293288,-43.39791893288,1.585)); +#251350 = DIRECTION('',(0.,0.,-1.)); +#251351 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#251352 = ORIENTED_EDGE('',*,*,#251353,.T.); +#251353 = EDGE_CURVE('',#251345,#251354,#251356,.T.); +#251354 = VERTEX_POINT('',#251355); +#251355 = CARTESIAN_POINT('',(111.074732,-44.412551,1.585)); +#251356 = LINE('',#251357,#251358); +#251357 = CARTESIAN_POINT('',(111.076173,-43.397919,1.585)); +#251358 = VECTOR('',#251359,1.); +#251359 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#251360 = ORIENTED_EDGE('',*,*,#251361,.T.); +#251361 = EDGE_CURVE('',#251354,#251362,#251364,.T.); +#251362 = VERTEX_POINT('',#251363); +#251363 = CARTESIAN_POINT('',(110.926173,-44.397919,1.585)); +#251364 = CIRCLE('',#251365,7.500006711463E-02); +#251365 = AXIS2_PLACEMENT_3D('',#251366,#251367,#251368); +#251366 = CARTESIAN_POINT('',(111.00117306711,-44.39791906711,1.585)); +#251367 = DIRECTION('',(-0.,0.,-1.)); +#251368 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#251369 = ORIENTED_EDGE('',*,*,#251370,.T.); +#251370 = EDGE_CURVE('',#251362,#251371,#251373,.T.); +#251371 = VERTEX_POINT('',#251372); +#251372 = CARTESIAN_POINT('',(110.926173,-43.949109,1.585)); +#251373 = LINE('',#251374,#251375); +#251374 = CARTESIAN_POINT('',(110.926173,-44.397919,1.585)); +#251375 = VECTOR('',#251376,1.); +#251376 = DIRECTION('',(0.,1.,0.)); +#251377 = ORIENTED_EDGE('',*,*,#251378,.T.); +#251378 = EDGE_CURVE('',#251371,#251379,#251381,.T.); +#251379 = VERTEX_POINT('',#251380); +#251380 = CARTESIAN_POINT('',(110.504745,-43.949109,1.585)); +#251381 = LINE('',#251382,#251383); +#251382 = CARTESIAN_POINT('',(110.926173,-43.949109,1.585)); +#251383 = VECTOR('',#251384,1.); +#251384 = DIRECTION('',(-1.,0.,0.)); +#251385 = ORIENTED_EDGE('',*,*,#251386,.T.); +#251386 = EDGE_CURVE('',#251379,#251387,#251389,.T.); +#251387 = VERTEX_POINT('',#251388); +#251388 = CARTESIAN_POINT('',(110.503304,-44.412551,1.585)); +#251389 = LINE('',#251390,#251391); +#251390 = CARTESIAN_POINT('',(110.504745,-43.949109,1.585)); +#251391 = VECTOR('',#251392,1.); +#251392 = DIRECTION('',(-3.109327670448E-03,-0.999995166029,0.)); +#251393 = ORIENTED_EDGE('',*,*,#251394,.T.); +#251394 = EDGE_CURVE('',#251387,#251395,#251397,.T.); +#251395 = VERTEX_POINT('',#251396); +#251396 = CARTESIAN_POINT('',(110.354745,-44.397919,1.585)); +#251397 = CIRCLE('',#251398,7.500006711464E-02); +#251398 = AXIS2_PLACEMENT_3D('',#251399,#251400,#251401); +#251399 = CARTESIAN_POINT('',(110.42974506711,-44.39791906711,1.585)); +#251400 = DIRECTION('',(-0.,0.,-1.)); +#251401 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#251402 = ORIENTED_EDGE('',*,*,#251403,.T.); +#251403 = EDGE_CURVE('',#251395,#251404,#251406,.T.); +#251404 = VERTEX_POINT('',#251405); +#251405 = CARTESIAN_POINT('',(110.356186,-43.383287,1.585)); +#251406 = LINE('',#251407,#251408); +#251407 = CARTESIAN_POINT('',(110.354745,-44.397919,1.585)); +#251408 = VECTOR('',#251409,1.); +#251409 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#251410 = ORIENTED_EDGE('',*,*,#251411,.T.); +#251411 = EDGE_CURVE('',#251404,#251412,#251414,.T.); +#251412 = VERTEX_POINT('',#251413); +#251413 = CARTESIAN_POINT('',(110.367385,-43.356251,1.585)); +#251414 = LINE('',#251415,#251416); +#251415 = CARTESIAN_POINT('',(110.356186,-43.383287,1.585)); +#251416 = VECTOR('',#251417,1.); +#251417 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251418 = ORIENTED_EDGE('',*,*,#251419,.T.); +#251419 = EDGE_CURVE('',#251412,#251310,#251420,.T.); +#251420 = LINE('',#251421,#251422); +#251421 = CARTESIAN_POINT('',(110.367385,-43.356251,1.585)); +#251422 = VECTOR('',#251423,1.); +#251423 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251424 = PLANE('',#251425); +#251425 = AXIS2_PLACEMENT_3D('',#251426,#251427,#251428); +#251426 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251427 = DIRECTION('',(0.,0.,1.)); +#251428 = DIRECTION('',(1.,0.,-0.)); +#251429 = SHELL_BASED_SURFACE_MODEL('',(#251430)); +#251430 = OPEN_SHELL('',(#251431)); +#251431 = ADVANCED_FACE('',(#251432),#251618,.T.); +#251432 = FACE_BOUND('',#251433,.F.); +#251433 = EDGE_LOOP('',(#251434,#251445,#251453,#251462,#251470,#251478, + #251487,#251495,#251504,#251512,#251520,#251528,#251537,#251545, + #251554,#251562,#251571,#251579,#251587,#251595,#251604,#251612)); +#251434 = ORIENTED_EDGE('',*,*,#251435,.T.); +#251435 = EDGE_CURVE('',#251436,#251438,#251440,.T.); +#251436 = VERTEX_POINT('',#251437); +#251437 = CARTESIAN_POINT('',(111.367494,-43.471478,1.585)); +#251438 = VERTEX_POINT('',#251439); +#251439 = CARTESIAN_POINT('',(111.382126,-43.322919,1.585)); +#251440 = CIRCLE('',#251441,7.500006711464E-02); +#251441 = AXIS2_PLACEMENT_3D('',#251442,#251443,#251444); +#251442 = CARTESIAN_POINT('',(111.38212593288,-43.39791906711,1.585)); +#251443 = DIRECTION('',(0.,0.,-1.)); +#251444 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#251445 = ORIENTED_EDGE('',*,*,#251446,.T.); +#251446 = EDGE_CURVE('',#251438,#251447,#251449,.T.); +#251447 = VERTEX_POINT('',#251448); +#251448 = CARTESIAN_POINT('',(112.008911,-43.323681,1.585)); +#251449 = LINE('',#251450,#251451); +#251450 = CARTESIAN_POINT('',(111.382126,-43.322919,1.585)); +#251451 = VECTOR('',#251452,1.); +#251452 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#251453 = ORIENTED_EDGE('',*,*,#251454,.T.); +#251454 = EDGE_CURVE('',#251447,#251455,#251457,.T.); +#251455 = VERTEX_POINT('',#251456); +#251456 = CARTESIAN_POINT('',(112.074732,-43.412551,1.585)); +#251457 = CIRCLE('',#251458,7.447391611622E-02); +#251458 = AXIS2_PLACEMENT_3D('',#251459,#251460,#251461); +#251459 = CARTESIAN_POINT('',(112.00173192664,-43.3978080874,1.585)); +#251460 = DIRECTION('',(0.,0.,-1.)); +#251461 = DIRECTION('',(9.639715124761E-02,0.995342950561,0.)); +#251462 = ORIENTED_EDGE('',*,*,#251463,.T.); +#251463 = EDGE_CURVE('',#251455,#251464,#251466,.T.); +#251464 = VERTEX_POINT('',#251465); +#251465 = CARTESIAN_POINT('',(112.057616,-43.447307,1.585)); +#251466 = LINE('',#251467,#251468); +#251467 = CARTESIAN_POINT('',(112.074732,-43.412551,1.585)); +#251468 = VECTOR('',#251469,1.); +#251469 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#251470 = ORIENTED_EDGE('',*,*,#251471,.T.); +#251471 = EDGE_CURVE('',#251464,#251472,#251474,.T.); +#251472 = VERTEX_POINT('',#251473); +#251473 = CARTESIAN_POINT('',(111.83072,-43.706616,1.585)); +#251474 = LINE('',#251475,#251476); +#251475 = CARTESIAN_POINT('',(112.057616,-43.447307,1.585)); +#251476 = VECTOR('',#251477,1.); +#251477 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#251478 = ORIENTED_EDGE('',*,*,#251479,.T.); +#251479 = EDGE_CURVE('',#251472,#251480,#251482,.T.); +#251480 = VERTEX_POINT('',#251481); +#251481 = CARTESIAN_POINT('',(112.074732,-43.954715,1.585)); +#251482 = CIRCLE('',#251483,0.348520834816); +#251483 = AXIS2_PLACEMENT_3D('',#251484,#251485,#251486); +#251484 = CARTESIAN_POINT('',(111.7374266174,-44.04241819931,1.585)); +#251485 = DIRECTION('',(0.,0.,-1.)); +#251486 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#251487 = ORIENTED_EDGE('',*,*,#251488,.T.); +#251488 = EDGE_CURVE('',#251480,#251489,#251491,.T.); +#251489 = VERTEX_POINT('',#251490); +#251490 = CARTESIAN_POINT('',(112.07351,-44.227252,1.585)); +#251491 = LINE('',#251492,#251493); +#251492 = CARTESIAN_POINT('',(112.074732,-43.954715,1.585)); +#251493 = VECTOR('',#251494,1.); +#251494 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#251495 = ORIENTED_EDGE('',*,*,#251496,.T.); +#251496 = EDGE_CURVE('',#251489,#251497,#251499,.T.); +#251497 = VERTEX_POINT('',#251498); +#251498 = CARTESIAN_POINT('',(111.825329,-44.471478,1.585)); +#251499 = CIRCLE('',#251500,0.348635327447); +#251500 = AXIS2_PLACEMENT_3D('',#251501,#251502,#251503); +#251501 = CARTESIAN_POINT('',(111.73755748129,-44.13407208415,1.585)); +#251502 = DIRECTION('',(0.,0.,-1.)); +#251503 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#251504 = ORIENTED_EDGE('',*,*,#251505,.T.); +#251505 = EDGE_CURVE('',#251497,#251506,#251508,.T.); +#251506 = VERTEX_POINT('',#251507); +#251507 = CARTESIAN_POINT('',(111.505173,-44.470256,1.585)); +#251508 = LINE('',#251509,#251510); +#251509 = CARTESIAN_POINT('',(111.825329,-44.471478,1.585)); +#251510 = VECTOR('',#251511,1.); +#251511 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#251512 = ORIENTED_EDGE('',*,*,#251513,.T.); +#251513 = EDGE_CURVE('',#251506,#251514,#251516,.T.); +#251514 = VERTEX_POINT('',#251515); +#251515 = CARTESIAN_POINT('',(111.38246,-44.40805,1.585)); +#251516 = LINE('',#251517,#251518); +#251517 = CARTESIAN_POINT('',(111.505173,-44.470256,1.585)); +#251518 = VECTOR('',#251519,1.); +#251519 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#251520 = ORIENTED_EDGE('',*,*,#251521,.T.); +#251521 = EDGE_CURVE('',#251514,#251522,#251524,.T.); +#251522 = VERTEX_POINT('',#251523); +#251523 = CARTESIAN_POINT('',(111.319765,-44.344347,1.585)); +#251524 = LINE('',#251525,#251526); +#251525 = CARTESIAN_POINT('',(111.38246,-44.40805,1.585)); +#251526 = VECTOR('',#251527,1.); +#251527 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#251528 = ORIENTED_EDGE('',*,*,#251529,.T.); +#251529 = EDGE_CURVE('',#251522,#251530,#251532,.T.); +#251530 = VERTEX_POINT('',#251531); +#251531 = CARTESIAN_POINT('',(111.43516,-44.249648,1.585)); +#251532 = CIRCLE('',#251533,7.50001266804E-02); +#251533 = AXIS2_PLACEMENT_3D('',#251534,#251535,#251536); +#251534 = CARTESIAN_POINT('',(111.38212605199,-44.30268024831,1.585)); +#251535 = DIRECTION('',(0.,0.,-1.)); +#251536 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#251537 = ORIENTED_EDGE('',*,*,#251538,.T.); +#251538 = EDGE_CURVE('',#251530,#251539,#251541,.T.); +#251539 = VERTEX_POINT('',#251540); +#251540 = CARTESIAN_POINT('',(111.474172,-44.288661,1.585)); +#251541 = LINE('',#251542,#251543); +#251542 = CARTESIAN_POINT('',(111.43516,-44.249648,1.585)); +#251543 = VECTOR('',#251544,1.); +#251544 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#251545 = ORIENTED_EDGE('',*,*,#251546,.T.); +#251546 = EDGE_CURVE('',#251539,#251547,#251549,.T.); +#251547 = VERTEX_POINT('',#251548); +#251548 = CARTESIAN_POINT('',(111.861507,-44.288661,1.585)); +#251549 = CIRCLE('',#251550,0.358502380266); +#251550 = AXIS2_PLACEMENT_3D('',#251551,#251552,#251553); +#251551 = CARTESIAN_POINT('',(111.6678395,-43.986971,1.585)); +#251552 = DIRECTION('',(0.,0.,1.)); +#251553 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#251554 = ORIENTED_EDGE('',*,*,#251555,.T.); +#251555 = EDGE_CURVE('',#251547,#251556,#251558,.T.); +#251556 = VERTEX_POINT('',#251557); +#251557 = CARTESIAN_POINT('',(111.891914,-44.258253,1.585)); +#251558 = LINE('',#251559,#251560); +#251559 = CARTESIAN_POINT('',(111.861507,-44.288661,1.585)); +#251560 = VECTOR('',#251561,1.); +#251561 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#251562 = ORIENTED_EDGE('',*,*,#251563,.T.); +#251563 = EDGE_CURVE('',#251556,#251564,#251566,.T.); +#251564 = VERTEX_POINT('',#251565); +#251565 = CARTESIAN_POINT('',(111.891915,-43.918536,1.585)); +#251566 = CIRCLE('',#251567,0.305616146029); +#251567 = AXIS2_PLACEMENT_3D('',#251568,#251569,#251570); +#251568 = CARTESIAN_POINT('',(111.63784892049,-44.08839375212,1.585)); +#251569 = DIRECTION('',(0.,-0.,1.)); +#251570 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#251571 = ORIENTED_EDGE('',*,*,#251572,.T.); +#251572 = EDGE_CURVE('',#251564,#251573,#251575,.T.); +#251573 = VERTEX_POINT('',#251574); +#251574 = CARTESIAN_POINT('',(111.861508,-43.888129,1.585)); +#251575 = LINE('',#251576,#251577); +#251576 = CARTESIAN_POINT('',(111.891915,-43.918536,1.585)); +#251577 = VECTOR('',#251578,1.); +#251578 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#251579 = ORIENTED_EDGE('',*,*,#251580,.T.); +#251580 = EDGE_CURVE('',#251573,#251581,#251583,.T.); +#251581 = VERTEX_POINT('',#251582); +#251582 = CARTESIAN_POINT('',(111.792992,-43.853871,1.585)); +#251583 = LINE('',#251584,#251585); +#251584 = CARTESIAN_POINT('',(111.861508,-43.888129,1.585)); +#251585 = VECTOR('',#251586,1.); +#251586 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#251587 = ORIENTED_EDGE('',*,*,#251588,.T.); +#251588 = EDGE_CURVE('',#251581,#251589,#251591,.T.); +#251589 = VERTEX_POINT('',#251590); +#251590 = CARTESIAN_POINT('',(111.653208,-43.85243,1.585)); +#251591 = LINE('',#251592,#251593); +#251592 = CARTESIAN_POINT('',(111.792992,-43.853871,1.585)); +#251593 = VECTOR('',#251594,1.); +#251594 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#251595 = ORIENTED_EDGE('',*,*,#251596,.T.); +#251596 = EDGE_CURVE('',#251589,#251597,#251599,.T.); +#251597 = VERTEX_POINT('',#251598); +#251598 = CARTESIAN_POINT('',(111.611397,-43.729483,1.585)); +#251599 = CIRCLE('',#251600,7.500015628755E-02); +#251600 = AXIS2_PLACEMENT_3D('',#251601,#251602,#251603); +#251601 = CARTESIAN_POINT('',(111.66784028432,-43.7788710461,1.585)); +#251602 = DIRECTION('',(0.,0.,-1.)); +#251603 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#251604 = ORIENTED_EDGE('',*,*,#251605,.T.); +#251605 = EDGE_CURVE('',#251597,#251606,#251608,.T.); +#251606 = VERTEX_POINT('',#251607); +#251607 = CARTESIAN_POINT('',(111.835891,-43.472919,1.585)); +#251608 = LINE('',#251609,#251610); +#251609 = CARTESIAN_POINT('',(111.611397,-43.729483,1.585)); +#251610 = VECTOR('',#251611,1.); +#251611 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#251612 = ORIENTED_EDGE('',*,*,#251613,.T.); +#251613 = EDGE_CURVE('',#251606,#251436,#251614,.T.); +#251614 = LINE('',#251615,#251616); +#251615 = CARTESIAN_POINT('',(111.835891,-43.472919,1.585)); +#251616 = VECTOR('',#251617,1.); +#251617 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#251618 = PLANE('',#251619); +#251619 = AXIS2_PLACEMENT_3D('',#251620,#251621,#251622); +#251620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251621 = DIRECTION('',(0.,0.,1.)); +#251622 = DIRECTION('',(1.,0.,-0.)); +#251623 = SHELL_BASED_SURFACE_MODEL('',(#251624)); +#251624 = OPEN_SHELL('',(#251625)); +#251625 = ADVANCED_FACE('',(#251626),#251800,.T.); +#251626 = FACE_BOUND('',#251627,.F.); +#251627 = EDGE_LOOP('',(#251628,#251639,#251647,#251655,#251664,#251672, + #251680,#251688,#251696,#251704,#251713,#251721,#251729,#251737, + #251745,#251753,#251761,#251770,#251778,#251786,#251794)); +#251628 = ORIENTED_EDGE('',*,*,#251629,.T.); +#251629 = EDGE_CURVE('',#251630,#251632,#251634,.T.); +#251630 = VERTEX_POINT('',#251631); +#251631 = CARTESIAN_POINT('',(169.684506,-43.285559,1.585)); +#251632 = VERTEX_POINT('',#251633); +#251633 = CARTESIAN_POINT('',(169.801174,-43.347919,1.585)); +#251634 = CIRCLE('',#251635,7.500000000003E-02); +#251635 = AXIS2_PLACEMENT_3D('',#251636,#251637,#251638); +#251636 = CARTESIAN_POINT('',(169.726174,-43.34791906555,1.585)); +#251637 = DIRECTION('',(0.,0.,-1.)); +#251638 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#251639 = ORIENTED_EDGE('',*,*,#251640,.T.); +#251640 = EDGE_CURVE('',#251632,#251641,#251643,.T.); +#251641 = VERTEX_POINT('',#251642); +#251642 = CARTESIAN_POINT('',(169.801174,-43.606252,1.585)); +#251643 = LINE('',#251644,#251645); +#251644 = CARTESIAN_POINT('',(169.801174,-43.347919,1.585)); +#251645 = VECTOR('',#251646,1.); +#251646 = DIRECTION('',(0.,-1.,0.)); +#251647 = ORIENTED_EDGE('',*,*,#251648,.T.); +#251648 = EDGE_CURVE('',#251641,#251649,#251651,.T.); +#251649 = VERTEX_POINT('',#251650); +#251650 = CARTESIAN_POINT('',(169.978901,-43.607693,1.585)); +#251651 = LINE('',#251652,#251653); +#251652 = CARTESIAN_POINT('',(169.801174,-43.606252,1.585)); +#251653 = VECTOR('',#251654,1.); +#251654 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#251655 = ORIENTED_EDGE('',*,*,#251656,.T.); +#251656 = EDGE_CURVE('',#251649,#251657,#251659,.T.); +#251657 = VERTEX_POINT('',#251658); +#251658 = CARTESIAN_POINT('',(169.964269,-43.756252,1.585)); +#251659 = CIRCLE('',#251660,7.500006711464E-02); +#251660 = AXIS2_PLACEMENT_3D('',#251661,#251662,#251663); +#251661 = CARTESIAN_POINT('',(169.96426906711,-43.68125193288,1.585)); +#251662 = DIRECTION('',(0.,0.,-1.)); +#251663 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#251664 = ORIENTED_EDGE('',*,*,#251665,.T.); +#251665 = EDGE_CURVE('',#251657,#251666,#251668,.T.); +#251666 = VERTEX_POINT('',#251667); +#251667 = CARTESIAN_POINT('',(169.801174,-43.756252,1.585)); +#251668 = LINE('',#251669,#251670); +#251669 = CARTESIAN_POINT('',(169.964269,-43.756252,1.585)); +#251670 = VECTOR('',#251671,1.); +#251671 = DIRECTION('',(-1.,0.,0.)); +#251672 = ORIENTED_EDGE('',*,*,#251673,.T.); +#251673 = EDGE_CURVE('',#251666,#251674,#251676,.T.); +#251674 = VERTEX_POINT('',#251675); +#251675 = CARTESIAN_POINT('',(169.801174,-44.187356,1.585)); +#251676 = LINE('',#251677,#251678); +#251677 = CARTESIAN_POINT('',(169.801174,-43.756252,1.585)); +#251678 = VECTOR('',#251679,1.); +#251679 = DIRECTION('',(0.,-1.,0.)); +#251680 = ORIENTED_EDGE('',*,*,#251681,.T.); +#251681 = EDGE_CURVE('',#251674,#251682,#251684,.T.); +#251682 = VERTEX_POINT('',#251683); +#251683 = CARTESIAN_POINT('',(169.829694,-44.244398,1.585)); +#251684 = LINE('',#251685,#251686); +#251685 = CARTESIAN_POINT('',(169.801174,-44.187356,1.585)); +#251686 = VECTOR('',#251687,1.); +#251687 = DIRECTION('',(0.447201051247,-0.894433463017,0.)); +#251688 = ORIENTED_EDGE('',*,*,#251689,.T.); +#251689 = EDGE_CURVE('',#251682,#251690,#251692,.T.); +#251690 = VERTEX_POINT('',#251691); +#251691 = CARTESIAN_POINT('',(169.886736,-44.272919,1.585)); +#251692 = LINE('',#251693,#251694); +#251693 = CARTESIAN_POINT('',(169.829694,-44.244398,1.585)); +#251694 = VECTOR('',#251695,1.); +#251695 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#251696 = ORIENTED_EDGE('',*,*,#251697,.T.); +#251697 = EDGE_CURVE('',#251690,#251698,#251700,.T.); +#251698 = VERTEX_POINT('',#251699); +#251699 = CARTESIAN_POINT('',(169.978901,-44.27436,1.585)); +#251700 = LINE('',#251701,#251702); +#251701 = CARTESIAN_POINT('',(169.886736,-44.272919,1.585)); +#251702 = VECTOR('',#251703,1.); +#251703 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#251704 = ORIENTED_EDGE('',*,*,#251705,.T.); +#251705 = EDGE_CURVE('',#251698,#251706,#251708,.T.); +#251706 = VERTEX_POINT('',#251707); +#251707 = CARTESIAN_POINT('',(169.964269,-44.422919,1.585)); +#251708 = CIRCLE('',#251709,7.500006711464E-02); +#251709 = AXIS2_PLACEMENT_3D('',#251710,#251711,#251712); +#251710 = CARTESIAN_POINT('',(169.96426906711,-44.34791893288,1.585)); +#251711 = DIRECTION('',(0.,0.,-1.)); +#251712 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#251713 = ORIENTED_EDGE('',*,*,#251714,.T.); +#251714 = EDGE_CURVE('',#251706,#251715,#251717,.T.); +#251715 = VERTEX_POINT('',#251716); +#251716 = CARTESIAN_POINT('',(169.849221,-44.420256,1.585)); +#251717 = LINE('',#251718,#251719); +#251718 = CARTESIAN_POINT('',(169.964269,-44.422919,1.585)); +#251719 = VECTOR('',#251720,1.); +#251720 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#251721 = ORIENTED_EDGE('',*,*,#251722,.T.); +#251722 = EDGE_CURVE('',#251715,#251723,#251725,.T.); +#251723 = VERTEX_POINT('',#251724); +#251724 = CARTESIAN_POINT('',(169.727809,-44.35955,1.585)); +#251725 = LINE('',#251726,#251727); +#251726 = CARTESIAN_POINT('',(169.849221,-44.420256,1.585)); +#251727 = VECTOR('',#251728,1.); +#251728 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#251729 = ORIENTED_EDGE('',*,*,#251730,.T.); +#251730 = EDGE_CURVE('',#251723,#251731,#251733,.T.); +#251731 = VERTEX_POINT('',#251732); +#251732 = CARTESIAN_POINT('',(169.706711,-44.333841,1.585)); +#251733 = LINE('',#251734,#251735); +#251734 = CARTESIAN_POINT('',(169.727809,-44.35955,1.585)); +#251735 = VECTOR('',#251736,1.); +#251736 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#251737 = ORIENTED_EDGE('',*,*,#251738,.T.); +#251738 = EDGE_CURVE('',#251731,#251739,#251741,.T.); +#251739 = VERTEX_POINT('',#251740); +#251740 = CARTESIAN_POINT('',(169.652615,-44.219693,1.585)); +#251741 = LINE('',#251742,#251743); +#251742 = CARTESIAN_POINT('',(169.706711,-44.333841,1.585)); +#251743 = VECTOR('',#251744,1.); +#251744 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#251745 = ORIENTED_EDGE('',*,*,#251746,.T.); +#251746 = EDGE_CURVE('',#251739,#251747,#251749,.T.); +#251747 = VERTEX_POINT('',#251748); +#251748 = CARTESIAN_POINT('',(169.651174,-43.756252,1.585)); +#251749 = LINE('',#251750,#251751); +#251750 = CARTESIAN_POINT('',(169.652615,-44.219693,1.585)); +#251751 = VECTOR('',#251752,1.); +#251752 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#251753 = ORIENTED_EDGE('',*,*,#251754,.T.); +#251754 = EDGE_CURVE('',#251747,#251755,#251757,.T.); +#251755 = VERTEX_POINT('',#251756); +#251756 = CARTESIAN_POINT('',(169.568685,-43.754811,1.585)); +#251757 = LINE('',#251758,#251759); +#251758 = CARTESIAN_POINT('',(169.651174,-43.756252,1.585)); +#251759 = VECTOR('',#251760,1.); +#251760 = DIRECTION('',(-0.999847452005,1.746633100591E-02,0.)); +#251761 = ORIENTED_EDGE('',*,*,#251762,.T.); +#251762 = EDGE_CURVE('',#251755,#251763,#251765,.T.); +#251763 = VERTEX_POINT('',#251764); +#251764 = CARTESIAN_POINT('',(169.583317,-43.606252,1.585)); +#251765 = CIRCLE('',#251766,7.500006711464E-02); +#251766 = AXIS2_PLACEMENT_3D('',#251767,#251768,#251769); +#251767 = CARTESIAN_POINT('',(169.58331693288,-43.68125206711,1.585)); +#251768 = DIRECTION('',(0.,0.,-1.)); +#251769 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#251770 = ORIENTED_EDGE('',*,*,#251771,.T.); +#251771 = EDGE_CURVE('',#251763,#251772,#251774,.T.); +#251772 = VERTEX_POINT('',#251773); +#251773 = CARTESIAN_POINT('',(169.651174,-43.606252,1.585)); +#251774 = LINE('',#251775,#251776); +#251775 = CARTESIAN_POINT('',(169.583317,-43.606252,1.585)); +#251776 = VECTOR('',#251777,1.); +#251777 = DIRECTION('',(1.,0.,0.)); +#251778 = ORIENTED_EDGE('',*,*,#251779,.T.); +#251779 = EDGE_CURVE('',#251772,#251780,#251782,.T.); +#251780 = VERTEX_POINT('',#251781); +#251781 = CARTESIAN_POINT('',(169.652615,-43.333287,1.585)); +#251782 = LINE('',#251783,#251784); +#251783 = CARTESIAN_POINT('',(169.651174,-43.606252,1.585)); +#251784 = VECTOR('',#251785,1.); +#251785 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#251786 = ORIENTED_EDGE('',*,*,#251787,.T.); +#251787 = EDGE_CURVE('',#251780,#251788,#251790,.T.); +#251788 = VERTEX_POINT('',#251789); +#251789 = CARTESIAN_POINT('',(169.663814,-43.306251,1.585)); +#251790 = LINE('',#251791,#251792); +#251791 = CARTESIAN_POINT('',(169.652615,-43.333287,1.585)); +#251792 = VECTOR('',#251793,1.); +#251793 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251794 = ORIENTED_EDGE('',*,*,#251795,.T.); +#251795 = EDGE_CURVE('',#251788,#251630,#251796,.T.); +#251796 = LINE('',#251797,#251798); +#251797 = CARTESIAN_POINT('',(169.663814,-43.306251,1.585)); +#251798 = VECTOR('',#251799,1.); +#251799 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#251800 = PLANE('',#251801); +#251801 = AXIS2_PLACEMENT_3D('',#251802,#251803,#251804); +#251802 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251803 = DIRECTION('',(0.,0.,1.)); +#251804 = DIRECTION('',(1.,0.,-0.)); +#251805 = SHELL_BASED_SURFACE_MODEL('',(#251806)); +#251806 = OPEN_SHELL('',(#251807)); +#251807 = ADVANCED_FACE('',(#251808),#251967,.T.); +#251808 = FACE_BOUND('',#251809,.F.); +#251809 = EDGE_LOOP('',(#251810,#251821,#251829,#251837,#251845,#251853, + #251861,#251869,#251878,#251886,#251895,#251903,#251911,#251919, + #251928,#251936,#251944,#251952,#251961)); +#251810 = ORIENTED_EDGE('',*,*,#251811,.T.); +#251811 = EDGE_CURVE('',#251812,#251814,#251816,.T.); +#251812 = VERTEX_POINT('',#251813); +#251813 = CARTESIAN_POINT('',(173.618823,-43.328456,1.585)); +#251814 = VERTEX_POINT('',#251815); +#251815 = CARTESIAN_POINT('',(174.128218,-43.337786,1.585)); +#251816 = CIRCLE('',#251817,0.450326844012); +#251817 = AXIS2_PLACEMENT_3D('',#251818,#251819,#251820); +#251818 = CARTESIAN_POINT('',(173.8667200301,-43.70440989199,1.585)); +#251819 = DIRECTION('',(0.,0.,-1.)); +#251820 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#251821 = ORIENTED_EDGE('',*,*,#251822,.T.); +#251822 = EDGE_CURVE('',#251814,#251823,#251825,.T.); +#251823 = VERTEX_POINT('',#251824); +#251824 = CARTESIAN_POINT('',(174.191671,-43.403316,1.585)); +#251825 = LINE('',#251826,#251827); +#251826 = CARTESIAN_POINT('',(174.128218,-43.337786,1.585)); +#251827 = VECTOR('',#251828,1.); +#251828 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#251829 = ORIENTED_EDGE('',*,*,#251830,.T.); +#251830 = EDGE_CURVE('',#251823,#251831,#251833,.T.); +#251831 = VERTEX_POINT('',#251832); +#251832 = CARTESIAN_POINT('',(174.249732,-43.523763,1.585)); +#251833 = LINE('',#251834,#251835); +#251834 = CARTESIAN_POINT('',(174.191671,-43.403316,1.585)); +#251835 = VECTOR('',#251836,1.); +#251836 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#251837 = ORIENTED_EDGE('',*,*,#251838,.T.); +#251838 = EDGE_CURVE('',#251831,#251839,#251841,.T.); +#251839 = VERTEX_POINT('',#251840); +#251840 = CARTESIAN_POINT('',(174.248973,-43.650095,1.585)); +#251841 = LINE('',#251842,#251843); +#251842 = CARTESIAN_POINT('',(174.249732,-43.523763,1.585)); +#251843 = VECTOR('',#251844,1.); +#251844 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#251845 = ORIENTED_EDGE('',*,*,#251846,.T.); +#251846 = EDGE_CURVE('',#251839,#251847,#251849,.T.); +#251847 = VERTEX_POINT('',#251848); +#251848 = CARTESIAN_POINT('',(174.190915,-43.818158,1.585)); +#251849 = LINE('',#251850,#251851); +#251850 = CARTESIAN_POINT('',(174.248973,-43.650095,1.585)); +#251851 = VECTOR('',#251852,1.); +#251852 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#251853 = ORIENTED_EDGE('',*,*,#251854,.T.); +#251854 = EDGE_CURVE('',#251847,#251855,#251857,.T.); +#251855 = VERTEX_POINT('',#251856); +#251856 = CARTESIAN_POINT('',(173.738192,-44.272919,1.585)); +#251857 = LINE('',#251858,#251859); +#251858 = CARTESIAN_POINT('',(174.190915,-43.818158,1.585)); +#251859 = VECTOR('',#251860,1.); +#251860 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#251861 = ORIENTED_EDGE('',*,*,#251862,.T.); +#251862 = EDGE_CURVE('',#251855,#251863,#251865,.T.); +#251863 = VERTEX_POINT('',#251864); +#251864 = CARTESIAN_POINT('',(174.190805,-44.27436,1.585)); +#251865 = LINE('',#251866,#251867); +#251866 = CARTESIAN_POINT('',(173.738192,-44.272919,1.585)); +#251867 = VECTOR('',#251868,1.); +#251868 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#251869 = ORIENTED_EDGE('',*,*,#251870,.T.); +#251870 = EDGE_CURVE('',#251863,#251871,#251873,.T.); +#251871 = VERTEX_POINT('',#251872); +#251872 = CARTESIAN_POINT('',(174.176173,-44.422919,1.585)); +#251873 = CIRCLE('',#251874,7.500006711464E-02); +#251874 = AXIS2_PLACEMENT_3D('',#251875,#251876,#251877); +#251875 = CARTESIAN_POINT('',(174.17617306711,-44.34791893288,1.585)); +#251876 = DIRECTION('',(0.,0.,-1.)); +#251877 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#251878 = ORIENTED_EDGE('',*,*,#251879,.T.); +#251879 = EDGE_CURVE('',#251871,#251880,#251882,.T.); +#251880 = VERTEX_POINT('',#251881); +#251881 = CARTESIAN_POINT('',(173.542494,-44.421478,1.585)); +#251882 = LINE('',#251883,#251884); +#251883 = CARTESIAN_POINT('',(174.176173,-44.422919,1.585)); +#251884 = VECTOR('',#251885,1.); +#251885 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#251886 = ORIENTED_EDGE('',*,*,#251887,.T.); +#251887 = EDGE_CURVE('',#251880,#251888,#251890,.T.); +#251888 = VERTEX_POINT('',#251889); +#251889 = CARTESIAN_POINT('',(173.504093,-44.294886,1.585)); +#251890 = CIRCLE('',#251891,7.500021013109E-02); +#251891 = AXIS2_PLACEMENT_3D('',#251892,#251893,#251894); +#251892 = CARTESIAN_POINT('',(173.5571263167,-44.34791899764,1.585)); +#251893 = DIRECTION('',(0.,0.,-1.)); +#251894 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#251895 = ORIENTED_EDGE('',*,*,#251896,.T.); +#251896 = EDGE_CURVE('',#251888,#251897,#251899,.T.); +#251897 = VERTEX_POINT('',#251898); +#251898 = CARTESIAN_POINT('',(174.063001,-43.735976,1.585)); +#251899 = LINE('',#251900,#251901); +#251900 = CARTESIAN_POINT('',(173.504093,-44.294886,1.585)); +#251901 = VECTOR('',#251902,1.); +#251902 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#251903 = ORIENTED_EDGE('',*,*,#251904,.T.); +#251904 = EDGE_CURVE('',#251897,#251905,#251907,.T.); +#251905 = VERTEX_POINT('',#251906); +#251906 = CARTESIAN_POINT('',(174.101173,-43.621463,1.585)); +#251907 = LINE('',#251908,#251909); +#251908 = CARTESIAN_POINT('',(174.063001,-43.735976,1.585)); +#251909 = VECTOR('',#251910,1.); +#251910 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#251911 = ORIENTED_EDGE('',*,*,#251912,.T.); +#251912 = EDGE_CURVE('',#251905,#251913,#251915,.T.); +#251913 = VERTEX_POINT('',#251914); +#251914 = CARTESIAN_POINT('',(174.101173,-43.5561,1.585)); +#251915 = LINE('',#251916,#251917); +#251916 = CARTESIAN_POINT('',(174.101173,-43.621463,1.585)); +#251917 = VECTOR('',#251918,1.); +#251918 = DIRECTION('',(0.,1.,0.)); +#251919 = ORIENTED_EDGE('',*,*,#251920,.T.); +#251920 = EDGE_CURVE('',#251913,#251921,#251923,.T.); +#251921 = VERTEX_POINT('',#251922); +#251922 = CARTESIAN_POINT('',(173.967992,-43.422919,1.585)); +#251923 = CIRCLE('',#251924,0.18686440374); +#251924 = AXIS2_PLACEMENT_3D('',#251925,#251926,#251927); +#251925 = CARTESIAN_POINT('',(173.920456,-43.603636,1.585)); +#251926 = DIRECTION('',(0.,0.,1.)); +#251927 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#251928 = ORIENTED_EDGE('',*,*,#251929,.T.); +#251929 = EDGE_CURVE('',#251921,#251930,#251932,.T.); +#251930 = VERTEX_POINT('',#251931); +#251931 = CARTESIAN_POINT('',(173.765307,-43.422919,1.585)); +#251932 = LINE('',#251933,#251934); +#251933 = CARTESIAN_POINT('',(173.967992,-43.422919,1.585)); +#251934 = VECTOR('',#251935,1.); +#251935 = DIRECTION('',(-1.,0.,0.)); +#251936 = ORIENTED_EDGE('',*,*,#251937,.T.); +#251937 = EDGE_CURVE('',#251930,#251938,#251940,.T.); +#251938 = VERTEX_POINT('',#251939); +#251939 = CARTESIAN_POINT('',(173.696791,-43.457177,1.585)); +#251940 = LINE('',#251941,#251942); +#251941 = CARTESIAN_POINT('',(173.765307,-43.422919,1.585)); +#251942 = VECTOR('',#251943,1.); +#251943 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#251944 = ORIENTED_EDGE('',*,*,#251945,.T.); +#251945 = EDGE_CURVE('',#251938,#251946,#251948,.T.); +#251946 = VERTEX_POINT('',#251947); +#251947 = CARTESIAN_POINT('',(173.646413,-43.505517,1.585)); +#251948 = LINE('',#251949,#251950); +#251949 = CARTESIAN_POINT('',(173.696791,-43.457177,1.585)); +#251950 = VECTOR('',#251951,1.); +#251951 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#251952 = ORIENTED_EDGE('',*,*,#251953,.T.); +#251953 = EDGE_CURVE('',#251946,#251954,#251956,.T.); +#251954 = VERTEX_POINT('',#251955); +#251955 = CARTESIAN_POINT('',(173.551712,-43.390124,1.585)); +#251956 = CIRCLE('',#251957,7.499996838526E-02); +#251957 = AXIS2_PLACEMENT_3D('',#251958,#251959,#251960); +#251958 = CARTESIAN_POINT('',(173.604745,-43.44315697246,1.585)); +#251959 = DIRECTION('',(0.,0.,-1.)); +#251960 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#251961 = ORIENTED_EDGE('',*,*,#251962,.T.); +#251962 = EDGE_CURVE('',#251954,#251812,#251963,.T.); +#251963 = LINE('',#251964,#251965); +#251964 = CARTESIAN_POINT('',(173.551712,-43.390124,1.585)); +#251965 = VECTOR('',#251966,1.); +#251966 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#251967 = PLANE('',#251968); +#251968 = AXIS2_PLACEMENT_3D('',#251969,#251970,#251971); +#251969 = CARTESIAN_POINT('',(0.,0.,1.585)); +#251970 = DIRECTION('',(0.,0.,1.)); +#251971 = DIRECTION('',(1.,0.,-0.)); +#251972 = SHELL_BASED_SURFACE_MODEL('',(#251973)); +#251973 = OPEN_SHELL('',(#251974)); +#251974 = ADVANCED_FACE('',(#251975),#252134,.T.); +#251975 = FACE_BOUND('',#251976,.F.); +#251976 = EDGE_LOOP('',(#251977,#251988,#251996,#252004,#252012,#252020, + #252028,#252036,#252045,#252053,#252062,#252070,#252078,#252086, + #252095,#252103,#252111,#252119,#252128)); +#251977 = ORIENTED_EDGE('',*,*,#251978,.T.); +#251978 = EDGE_CURVE('',#251979,#251981,#251983,.T.); +#251979 = VERTEX_POINT('',#251980); +#251980 = CARTESIAN_POINT('',(176.843823,-43.328456,1.585)); +#251981 = VERTEX_POINT('',#251982); +#251982 = CARTESIAN_POINT('',(177.353218,-43.337786,1.585)); +#251983 = CIRCLE('',#251984,0.450326844012); +#251984 = AXIS2_PLACEMENT_3D('',#251985,#251986,#251987); +#251985 = CARTESIAN_POINT('',(177.0917200301,-43.70440989199,1.585)); +#251986 = DIRECTION('',(0.,0.,-1.)); +#251987 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#251988 = ORIENTED_EDGE('',*,*,#251989,.T.); +#251989 = EDGE_CURVE('',#251981,#251990,#251992,.T.); +#251990 = VERTEX_POINT('',#251991); +#251991 = CARTESIAN_POINT('',(177.416671,-43.403316,1.585)); +#251992 = LINE('',#251993,#251994); +#251993 = CARTESIAN_POINT('',(177.353218,-43.337786,1.585)); +#251994 = VECTOR('',#251995,1.); +#251995 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#251996 = ORIENTED_EDGE('',*,*,#251997,.T.); +#251997 = EDGE_CURVE('',#251990,#251998,#252000,.T.); +#251998 = VERTEX_POINT('',#251999); +#251999 = CARTESIAN_POINT('',(177.474732,-43.523763,1.585)); +#252000 = LINE('',#252001,#252002); +#252001 = CARTESIAN_POINT('',(177.416671,-43.403316,1.585)); +#252002 = VECTOR('',#252003,1.); +#252003 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#252004 = ORIENTED_EDGE('',*,*,#252005,.T.); +#252005 = EDGE_CURVE('',#251998,#252006,#252008,.T.); +#252006 = VERTEX_POINT('',#252007); +#252007 = CARTESIAN_POINT('',(177.473973,-43.650095,1.585)); +#252008 = LINE('',#252009,#252010); +#252009 = CARTESIAN_POINT('',(177.474732,-43.523763,1.585)); +#252010 = VECTOR('',#252011,1.); +#252011 = DIRECTION('',(-6.007870547434E-03,-0.999981952583,0.)); +#252012 = ORIENTED_EDGE('',*,*,#252013,.T.); +#252013 = EDGE_CURVE('',#252006,#252014,#252016,.T.); +#252014 = VERTEX_POINT('',#252015); +#252015 = CARTESIAN_POINT('',(177.415915,-43.818158,1.585)); +#252016 = LINE('',#252017,#252018); +#252017 = CARTESIAN_POINT('',(177.473973,-43.650095,1.585)); +#252018 = VECTOR('',#252019,1.); +#252019 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#252020 = ORIENTED_EDGE('',*,*,#252021,.T.); +#252021 = EDGE_CURVE('',#252014,#252022,#252024,.T.); +#252022 = VERTEX_POINT('',#252023); +#252023 = CARTESIAN_POINT('',(176.963192,-44.272919,1.585)); +#252024 = LINE('',#252025,#252026); +#252025 = CARTESIAN_POINT('',(177.415915,-43.818158,1.585)); +#252026 = VECTOR('',#252027,1.); +#252027 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#252028 = ORIENTED_EDGE('',*,*,#252029,.T.); +#252029 = EDGE_CURVE('',#252022,#252030,#252032,.T.); +#252030 = VERTEX_POINT('',#252031); +#252031 = CARTESIAN_POINT('',(177.415805,-44.27436,1.585)); +#252032 = LINE('',#252033,#252034); +#252033 = CARTESIAN_POINT('',(176.963192,-44.272919,1.585)); +#252034 = VECTOR('',#252035,1.); +#252035 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#252036 = ORIENTED_EDGE('',*,*,#252037,.T.); +#252037 = EDGE_CURVE('',#252030,#252038,#252040,.T.); +#252038 = VERTEX_POINT('',#252039); +#252039 = CARTESIAN_POINT('',(177.401173,-44.422919,1.585)); +#252040 = CIRCLE('',#252041,7.500006711464E-02); +#252041 = AXIS2_PLACEMENT_3D('',#252042,#252043,#252044); +#252042 = CARTESIAN_POINT('',(177.40117306711,-44.34791893288,1.585)); +#252043 = DIRECTION('',(0.,0.,-1.)); +#252044 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#252045 = ORIENTED_EDGE('',*,*,#252046,.T.); +#252046 = EDGE_CURVE('',#252038,#252047,#252049,.T.); +#252047 = VERTEX_POINT('',#252048); +#252048 = CARTESIAN_POINT('',(176.767494,-44.421478,1.585)); +#252049 = LINE('',#252050,#252051); +#252050 = CARTESIAN_POINT('',(177.401173,-44.422919,1.585)); +#252051 = VECTOR('',#252052,1.); +#252052 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#252053 = ORIENTED_EDGE('',*,*,#252054,.T.); +#252054 = EDGE_CURVE('',#252047,#252055,#252057,.T.); +#252055 = VERTEX_POINT('',#252056); +#252056 = CARTESIAN_POINT('',(176.729093,-44.294886,1.585)); +#252057 = CIRCLE('',#252058,7.500021013109E-02); +#252058 = AXIS2_PLACEMENT_3D('',#252059,#252060,#252061); +#252059 = CARTESIAN_POINT('',(176.7821263167,-44.34791899764,1.585)); +#252060 = DIRECTION('',(0.,0.,-1.)); +#252061 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#252062 = ORIENTED_EDGE('',*,*,#252063,.T.); +#252063 = EDGE_CURVE('',#252055,#252064,#252066,.T.); +#252064 = VERTEX_POINT('',#252065); +#252065 = CARTESIAN_POINT('',(177.288001,-43.735976,1.585)); +#252066 = LINE('',#252067,#252068); +#252067 = CARTESIAN_POINT('',(176.729093,-44.294886,1.585)); +#252068 = VECTOR('',#252069,1.); +#252069 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#252070 = ORIENTED_EDGE('',*,*,#252071,.T.); +#252071 = EDGE_CURVE('',#252064,#252072,#252074,.T.); +#252072 = VERTEX_POINT('',#252073); +#252073 = CARTESIAN_POINT('',(177.326173,-43.621463,1.585)); +#252074 = LINE('',#252075,#252076); +#252075 = CARTESIAN_POINT('',(177.288001,-43.735976,1.585)); +#252076 = VECTOR('',#252077,1.); +#252077 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#252078 = ORIENTED_EDGE('',*,*,#252079,.T.); +#252079 = EDGE_CURVE('',#252072,#252080,#252082,.T.); +#252080 = VERTEX_POINT('',#252081); +#252081 = CARTESIAN_POINT('',(177.326173,-43.5561,1.585)); +#252082 = LINE('',#252083,#252084); +#252083 = CARTESIAN_POINT('',(177.326173,-43.621463,1.585)); +#252084 = VECTOR('',#252085,1.); +#252085 = DIRECTION('',(0.,1.,0.)); +#252086 = ORIENTED_EDGE('',*,*,#252087,.T.); +#252087 = EDGE_CURVE('',#252080,#252088,#252090,.T.); +#252088 = VERTEX_POINT('',#252089); +#252089 = CARTESIAN_POINT('',(177.192992,-43.422919,1.585)); +#252090 = CIRCLE('',#252091,0.18686440374); +#252091 = AXIS2_PLACEMENT_3D('',#252092,#252093,#252094); +#252092 = CARTESIAN_POINT('',(177.145456,-43.603636,1.585)); +#252093 = DIRECTION('',(0.,0.,1.)); +#252094 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#252095 = ORIENTED_EDGE('',*,*,#252096,.T.); +#252096 = EDGE_CURVE('',#252088,#252097,#252099,.T.); +#252097 = VERTEX_POINT('',#252098); +#252098 = CARTESIAN_POINT('',(176.990307,-43.422919,1.585)); +#252099 = LINE('',#252100,#252101); +#252100 = CARTESIAN_POINT('',(177.192992,-43.422919,1.585)); +#252101 = VECTOR('',#252102,1.); +#252102 = DIRECTION('',(-1.,0.,0.)); +#252103 = ORIENTED_EDGE('',*,*,#252104,.T.); +#252104 = EDGE_CURVE('',#252097,#252105,#252107,.T.); +#252105 = VERTEX_POINT('',#252106); +#252106 = CARTESIAN_POINT('',(176.921791,-43.457177,1.585)); +#252107 = LINE('',#252108,#252109); +#252108 = CARTESIAN_POINT('',(176.990307,-43.422919,1.585)); +#252109 = VECTOR('',#252110,1.); +#252110 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#252111 = ORIENTED_EDGE('',*,*,#252112,.T.); +#252112 = EDGE_CURVE('',#252105,#252113,#252115,.T.); +#252113 = VERTEX_POINT('',#252114); +#252114 = CARTESIAN_POINT('',(176.871413,-43.505517,1.585)); +#252115 = LINE('',#252116,#252117); +#252116 = CARTESIAN_POINT('',(176.921791,-43.457177,1.585)); +#252117 = VECTOR('',#252118,1.); +#252118 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#252119 = ORIENTED_EDGE('',*,*,#252120,.T.); +#252120 = EDGE_CURVE('',#252113,#252121,#252123,.T.); +#252121 = VERTEX_POINT('',#252122); +#252122 = CARTESIAN_POINT('',(176.776712,-43.390124,1.585)); +#252123 = CIRCLE('',#252124,7.499996838527E-02); +#252124 = AXIS2_PLACEMENT_3D('',#252125,#252126,#252127); +#252125 = CARTESIAN_POINT('',(176.829745,-43.44315697246,1.585)); +#252126 = DIRECTION('',(0.,0.,-1.)); +#252127 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#252128 = ORIENTED_EDGE('',*,*,#252129,.T.); +#252129 = EDGE_CURVE('',#252121,#251979,#252130,.T.); +#252130 = LINE('',#252131,#252132); +#252131 = CARTESIAN_POINT('',(176.776712,-43.390124,1.585)); +#252132 = VECTOR('',#252133,1.); +#252133 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#252134 = PLANE('',#252135); +#252135 = AXIS2_PLACEMENT_3D('',#252136,#252137,#252138); +#252136 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252137 = DIRECTION('',(0.,0.,1.)); +#252138 = DIRECTION('',(1.,0.,-0.)); +#252139 = SHELL_BASED_SURFACE_MODEL('',(#252140)); +#252140 = OPEN_SHELL('',(#252141)); +#252141 = ADVANCED_FACE('',(#252142),#252276,.T.); +#252142 = FACE_BOUND('',#252143,.F.); +#252143 = EDGE_LOOP('',(#252144,#252154,#252162,#252171,#252179,#252187, + #252196,#252204,#252213,#252221,#252229,#252237,#252245,#252254, + #252262,#252270)); +#252144 = ORIENTED_EDGE('',*,*,#252145,.T.); +#252145 = EDGE_CURVE('',#252146,#252148,#252150,.T.); +#252146 = VERTEX_POINT('',#252147); +#252147 = CARTESIAN_POINT('',(178.014752,-43.294941,1.585)); +#252148 = VERTEX_POINT('',#252149); +#252149 = CARTESIAN_POINT('',(178.053208,-43.27436,1.585)); +#252150 = LINE('',#252151,#252152); +#252151 = CARTESIAN_POINT('',(178.014752,-43.294941,1.585)); +#252152 = VECTOR('',#252153,1.); +#252153 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#252154 = ORIENTED_EDGE('',*,*,#252155,.T.); +#252155 = EDGE_CURVE('',#252148,#252156,#252158,.T.); +#252156 = VERTEX_POINT('',#252157); +#252157 = CARTESIAN_POINT('',(178.075045,-43.27436,1.585)); +#252158 = LINE('',#252159,#252160); +#252159 = CARTESIAN_POINT('',(178.053208,-43.27436,1.585)); +#252160 = VECTOR('',#252161,1.); +#252161 = DIRECTION('',(1.,0.,0.)); +#252162 = ORIENTED_EDGE('',*,*,#252163,.T.); +#252163 = EDGE_CURVE('',#252156,#252164,#252166,.T.); +#252164 = VERTEX_POINT('',#252165); +#252165 = CARTESIAN_POINT('',(178.14284,-43.347919,1.585)); +#252166 = CIRCLE('',#252167,7.216898094226E-02); +#252167 = AXIS2_PLACEMENT_3D('',#252168,#252169,#252170); +#252168 = CARTESIAN_POINT('',(178.07068706389,-43.34639728342,1.585)); +#252169 = DIRECTION('',(0.,0.,-1.)); +#252170 = DIRECTION('',(6.038516895227E-02,0.998175150648,0.)); +#252171 = ORIENTED_EDGE('',*,*,#252172,.T.); +#252172 = EDGE_CURVE('',#252164,#252173,#252175,.T.); +#252173 = VERTEX_POINT('',#252174); +#252174 = CARTESIAN_POINT('',(178.14284,-44.272919,1.585)); +#252175 = LINE('',#252176,#252177); +#252176 = CARTESIAN_POINT('',(178.14284,-43.347919,1.585)); +#252177 = VECTOR('',#252178,1.); +#252178 = DIRECTION('',(0.,-1.,0.)); +#252179 = ORIENTED_EDGE('',*,*,#252180,.T.); +#252180 = EDGE_CURVE('',#252173,#252181,#252183,.T.); +#252181 = VERTEX_POINT('',#252182); +#252182 = CARTESIAN_POINT('',(178.368186,-44.27436,1.585)); +#252183 = LINE('',#252184,#252185); +#252184 = CARTESIAN_POINT('',(178.14284,-44.272919,1.585)); +#252185 = VECTOR('',#252186,1.); +#252186 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#252187 = ORIENTED_EDGE('',*,*,#252188,.T.); +#252188 = EDGE_CURVE('',#252181,#252189,#252191,.T.); +#252189 = VERTEX_POINT('',#252190); +#252190 = CARTESIAN_POINT('',(178.353554,-44.422919,1.585)); +#252191 = CIRCLE('',#252192,7.500006711464E-02); +#252192 = AXIS2_PLACEMENT_3D('',#252193,#252194,#252195); +#252193 = CARTESIAN_POINT('',(178.35355406711,-44.34791893288,1.585)); +#252194 = DIRECTION('',(0.,0.,-1.)); +#252195 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#252196 = ORIENTED_EDGE('',*,*,#252197,.T.); +#252197 = EDGE_CURVE('',#252189,#252198,#252200,.T.); +#252198 = VERTEX_POINT('',#252199); +#252199 = CARTESIAN_POINT('',(177.767494,-44.421478,1.585)); +#252200 = LINE('',#252201,#252202); +#252201 = CARTESIAN_POINT('',(178.353554,-44.422919,1.585)); +#252202 = VECTOR('',#252203,1.); +#252203 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#252204 = ORIENTED_EDGE('',*,*,#252205,.T.); +#252205 = EDGE_CURVE('',#252198,#252206,#252208,.T.); +#252206 = VERTEX_POINT('',#252207); +#252207 = CARTESIAN_POINT('',(177.782126,-44.272919,1.585)); +#252208 = CIRCLE('',#252209,7.500006711464E-02); +#252209 = AXIS2_PLACEMENT_3D('',#252210,#252211,#252212); +#252210 = CARTESIAN_POINT('',(177.78212593288,-44.34791906711,1.585)); +#252211 = DIRECTION('',(0.,0.,-1.)); +#252212 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#252213 = ORIENTED_EDGE('',*,*,#252214,.T.); +#252214 = EDGE_CURVE('',#252206,#252215,#252217,.T.); +#252215 = VERTEX_POINT('',#252216); +#252216 = CARTESIAN_POINT('',(177.99284,-44.272919,1.585)); +#252217 = LINE('',#252218,#252219); +#252218 = CARTESIAN_POINT('',(177.782126,-44.272919,1.585)); +#252219 = VECTOR('',#252220,1.); +#252220 = DIRECTION('',(1.,0.,0.)); +#252221 = ORIENTED_EDGE('',*,*,#252222,.T.); +#252222 = EDGE_CURVE('',#252215,#252223,#252225,.T.); +#252223 = VERTEX_POINT('',#252224); +#252224 = CARTESIAN_POINT('',(177.99284,-43.576604,1.585)); +#252225 = LINE('',#252226,#252227); +#252226 = CARTESIAN_POINT('',(177.99284,-44.272919,1.585)); +#252227 = VECTOR('',#252228,1.); +#252228 = DIRECTION('',(0.,1.,0.)); +#252229 = ORIENTED_EDGE('',*,*,#252230,.T.); +#252230 = EDGE_CURVE('',#252223,#252231,#252233,.T.); +#252231 = VERTEX_POINT('',#252232); +#252232 = CARTESIAN_POINT('',(177.917204,-43.649131,1.585)); +#252233 = LINE('',#252234,#252235); +#252234 = CARTESIAN_POINT('',(177.99284,-43.576604,1.585)); +#252235 = VECTOR('',#252236,1.); +#252236 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#252237 = ORIENTED_EDGE('',*,*,#252238,.T.); +#252238 = EDGE_CURVE('',#252231,#252239,#252241,.T.); +#252239 = VERTEX_POINT('',#252240); +#252240 = CARTESIAN_POINT('',(177.801935,-43.70597,1.585)); +#252241 = LINE('',#252242,#252243); +#252242 = CARTESIAN_POINT('',(177.917204,-43.649131,1.585)); +#252243 = VECTOR('',#252244,1.); +#252244 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#252245 = ORIENTED_EDGE('',*,*,#252246,.T.); +#252246 = EDGE_CURVE('',#252239,#252247,#252249,.T.); +#252247 = VERTEX_POINT('',#252248); +#252248 = CARTESIAN_POINT('',(177.748585,-43.566551,1.585)); +#252249 = CIRCLE('',#252250,7.500005272361E-02); +#252250 = AXIS2_PLACEMENT_3D('',#252251,#252252,#252253); +#252251 = CARTESIAN_POINT('',(177.78212555676,-43.63363332972,1.585)); +#252252 = DIRECTION('',(0.,0.,-1.)); +#252253 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#252254 = ORIENTED_EDGE('',*,*,#252255,.T.); +#252255 = EDGE_CURVE('',#252247,#252256,#252258,.T.); +#252256 = VERTEX_POINT('',#252257); +#252257 = CARTESIAN_POINT('',(177.832937,-43.524375,1.585)); +#252258 = LINE('',#252259,#252260); +#252259 = CARTESIAN_POINT('',(177.748585,-43.566551,1.585)); +#252260 = VECTOR('',#252261,1.); +#252261 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#252262 = ORIENTED_EDGE('',*,*,#252263,.T.); +#252263 = EDGE_CURVE('',#252256,#252264,#252266,.T.); +#252264 = VERTEX_POINT('',#252265); +#252265 = CARTESIAN_POINT('',(177.914316,-43.442996,1.585)); +#252266 = LINE('',#252267,#252268); +#252267 = CARTESIAN_POINT('',(177.832937,-43.524375,1.585)); +#252268 = VECTOR('',#252269,1.); +#252269 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#252270 = ORIENTED_EDGE('',*,*,#252271,.T.); +#252271 = EDGE_CURVE('',#252264,#252146,#252272,.T.); +#252272 = LINE('',#252273,#252274); +#252273 = CARTESIAN_POINT('',(177.914316,-43.442996,1.585)); +#252274 = VECTOR('',#252275,1.); +#252275 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#252276 = PLANE('',#252277); +#252277 = AXIS2_PLACEMENT_3D('',#252278,#252279,#252280); +#252278 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252279 = DIRECTION('',(0.,0.,1.)); +#252280 = DIRECTION('',(1.,0.,-0.)); +#252281 = SHELL_BASED_SURFACE_MODEL('',(#252282)); +#252282 = OPEN_SHELL('',(#252283)); +#252283 = ADVANCED_FACE('',(#252284,#252395),#252447,.T.); +#252284 = FACE_BOUND('',#252285,.F.); +#252285 = EDGE_LOOP('',(#252286,#252297,#252305,#252314,#252322,#252331, + #252339,#252347,#252356,#252364,#252372,#252380,#252389)); +#252286 = ORIENTED_EDGE('',*,*,#252287,.T.); +#252287 = EDGE_CURVE('',#252288,#252290,#252292,.T.); +#252288 = VERTEX_POINT('',#252289); +#252289 = CARTESIAN_POINT('',(172.578805,-43.333287,1.585)); +#252290 = VERTEX_POINT('',#252291); +#252291 = CARTESIAN_POINT('',(172.652364,-43.272919,1.585)); +#252292 = CIRCLE('',#252293,7.500074938988E-02); +#252293 = AXIS2_PLACEMENT_3D('',#252294,#252295,#252296); +#252294 = CARTESIAN_POINT('',(172.65236446611,-43.34791974938,1.585)); +#252295 = DIRECTION('',(0.,0.,-1.)); +#252296 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#252297 = ORIENTED_EDGE('',*,*,#252298,.T.); +#252298 = EDGE_CURVE('',#252290,#252299,#252301,.T.); +#252299 = VERTEX_POINT('',#252300); +#252300 = CARTESIAN_POINT('',(173.047948,-43.27436,1.585)); +#252301 = LINE('',#252302,#252303); +#252302 = CARTESIAN_POINT('',(172.652364,-43.272919,1.585)); +#252303 = VECTOR('',#252304,1.); +#252304 = DIRECTION('',(0.999993365378,-3.642691411961E-03,0.)); +#252305 = ORIENTED_EDGE('',*,*,#252306,.T.); +#252306 = EDGE_CURVE('',#252299,#252307,#252309,.T.); +#252307 = VERTEX_POINT('',#252308); +#252308 = CARTESIAN_POINT('',(173.297351,-43.523763,1.585)); +#252309 = CIRCLE('',#252310,0.347870264855); +#252310 = AXIS2_PLACEMENT_3D('',#252311,#252312,#252313); +#252311 = CARTESIAN_POINT('',(172.96062026502,-43.61109073497,1.585)); +#252312 = DIRECTION('',(0.,0.,-1.)); +#252313 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#252314 = ORIENTED_EDGE('',*,*,#252315,.T.); +#252315 = EDGE_CURVE('',#252307,#252316,#252318,.T.); +#252316 = VERTEX_POINT('',#252317); +#252317 = CARTESIAN_POINT('',(173.296129,-43.701062,1.585)); +#252318 = LINE('',#252319,#252320); +#252319 = CARTESIAN_POINT('',(173.297351,-43.523763,1.585)); +#252320 = VECTOR('',#252321,1.); +#252321 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#252322 = ORIENTED_EDGE('',*,*,#252323,.T.); +#252323 = EDGE_CURVE('',#252316,#252324,#252326,.T.); +#252324 = VERTEX_POINT('',#252325); +#252325 = CARTESIAN_POINT('',(173.047948,-43.945287,1.585)); +#252326 = CIRCLE('',#252327,0.348632345849); +#252327 = AXIS2_PLACEMENT_3D('',#252328,#252329,#252330); +#252328 = CARTESIAN_POINT('',(172.96017919403,-43.6078834593,1.585)); +#252329 = DIRECTION('',(0.,0.,-1.)); +#252330 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#252331 = ORIENTED_EDGE('',*,*,#252332,.T.); +#252332 = EDGE_CURVE('',#252324,#252333,#252335,.T.); +#252333 = VERTEX_POINT('',#252334); +#252334 = CARTESIAN_POINT('',(173.034431,-43.946618,1.585)); +#252335 = LINE('',#252336,#252337); +#252336 = CARTESIAN_POINT('',(173.047948,-43.945287,1.585)); +#252337 = VECTOR('',#252338,1.); +#252338 = DIRECTION('',(-0.995186940545,-9.799465989996E-02,0.)); +#252339 = ORIENTED_EDGE('',*,*,#252340,.T.); +#252340 = EDGE_CURVE('',#252333,#252341,#252343,.T.); +#252341 = VERTEX_POINT('',#252342); +#252342 = CARTESIAN_POINT('',(173.292445,-44.317723,1.585)); +#252343 = LINE('',#252344,#252345); +#252344 = CARTESIAN_POINT('',(173.034431,-43.946618,1.585)); +#252345 = VECTOR('',#252346,1.); +#252346 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#252347 = ORIENTED_EDGE('',*,*,#252348,.T.); +#252348 = EDGE_CURVE('',#252341,#252349,#252351,.T.); +#252349 = VERTEX_POINT('',#252350); +#252350 = CARTESIAN_POINT('',(173.16235,-44.390929,1.585)); +#252351 = CIRCLE('',#252352,7.500005951702E-02); +#252352 = AXIS2_PLACEMENT_3D('',#252353,#252354,#252355); +#252353 = CARTESIAN_POINT('',(173.22379206294,-44.34791874739,1.585)); +#252354 = DIRECTION('',(0.,0.,-1.)); +#252355 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#252356 = ORIENTED_EDGE('',*,*,#252357,.T.); +#252357 = EDGE_CURVE('',#252349,#252358,#252360,.T.); +#252358 = VERTEX_POINT('',#252359); +#252359 = CARTESIAN_POINT('',(172.85141,-43.946728,1.585)); +#252360 = LINE('',#252361,#252362); +#252361 = CARTESIAN_POINT('',(173.16235,-44.390929,1.585)); +#252362 = VECTOR('',#252363,1.); +#252363 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#252364 = ORIENTED_EDGE('',*,*,#252365,.T.); +#252365 = EDGE_CURVE('',#252358,#252366,#252368,.T.); +#252366 = VERTEX_POINT('',#252367); +#252367 = CARTESIAN_POINT('',(172.727364,-43.946728,1.585)); +#252368 = LINE('',#252369,#252370); +#252369 = CARTESIAN_POINT('',(172.85141,-43.946728,1.585)); +#252370 = VECTOR('',#252371,1.); +#252371 = DIRECTION('',(-1.,0.,0.)); +#252372 = ORIENTED_EDGE('',*,*,#252373,.T.); +#252373 = EDGE_CURVE('',#252366,#252374,#252376,.T.); +#252374 = VERTEX_POINT('',#252375); +#252375 = CARTESIAN_POINT('',(172.725923,-44.362551,1.585)); +#252376 = LINE('',#252377,#252378); +#252377 = CARTESIAN_POINT('',(172.727364,-43.946728,1.585)); +#252378 = VECTOR('',#252379,1.); +#252379 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#252380 = ORIENTED_EDGE('',*,*,#252381,.T.); +#252381 = EDGE_CURVE('',#252374,#252382,#252384,.T.); +#252382 = VERTEX_POINT('',#252383); +#252383 = CARTESIAN_POINT('',(172.577364,-44.347919,1.585)); +#252384 = CIRCLE('',#252385,7.500006711464E-02); +#252385 = AXIS2_PLACEMENT_3D('',#252386,#252387,#252388); +#252386 = CARTESIAN_POINT('',(172.65236406711,-44.34791906711,1.585)); +#252387 = DIRECTION('',(-0.,0.,-1.)); +#252388 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#252389 = ORIENTED_EDGE('',*,*,#252390,.T.); +#252390 = EDGE_CURVE('',#252382,#252288,#252391,.T.); +#252391 = LINE('',#252392,#252393); +#252392 = CARTESIAN_POINT('',(172.577364,-44.347919,1.585)); +#252393 = VECTOR('',#252394,1.); +#252394 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#252395 = FACE_BOUND('',#252396,.F.); +#252396 = EDGE_LOOP('',(#252397,#252408,#252416,#252424,#252432,#252441) + ); +#252397 = ORIENTED_EDGE('',*,*,#252398,.T.); +#252398 = EDGE_CURVE('',#252399,#252401,#252403,.T.); +#252399 = VERTEX_POINT('',#252400); +#252400 = CARTESIAN_POINT('',(173.148792,-43.5561,1.585)); +#252401 = VERTEX_POINT('',#252402); +#252402 = CARTESIAN_POINT('',(173.015611,-43.422919,1.585)); +#252403 = CIRCLE('',#252404,0.18686440374); +#252404 = AXIS2_PLACEMENT_3D('',#252405,#252406,#252407); +#252405 = CARTESIAN_POINT('',(172.968075,-43.603636,1.585)); +#252406 = DIRECTION('',(0.,0.,1.)); +#252407 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#252408 = ORIENTED_EDGE('',*,*,#252409,.T.); +#252409 = EDGE_CURVE('',#252401,#252410,#252412,.T.); +#252410 = VERTEX_POINT('',#252411); +#252411 = CARTESIAN_POINT('',(172.727364,-43.422919,1.585)); +#252412 = LINE('',#252413,#252414); +#252413 = CARTESIAN_POINT('',(173.015611,-43.422919,1.585)); +#252414 = VECTOR('',#252415,1.); +#252415 = DIRECTION('',(-1.,0.,0.)); +#252416 = ORIENTED_EDGE('',*,*,#252417,.T.); +#252417 = EDGE_CURVE('',#252410,#252418,#252420,.T.); +#252418 = VERTEX_POINT('',#252419); +#252419 = CARTESIAN_POINT('',(172.727364,-43.796728,1.585)); +#252420 = LINE('',#252421,#252422); +#252421 = CARTESIAN_POINT('',(172.727364,-43.422919,1.585)); +#252422 = VECTOR('',#252423,1.); +#252423 = DIRECTION('',(0.,-1.,0.)); +#252424 = ORIENTED_EDGE('',*,*,#252425,.T.); +#252425 = EDGE_CURVE('',#252418,#252426,#252428,.T.); +#252426 = VERTEX_POINT('',#252427); +#252427 = CARTESIAN_POINT('',(173.015611,-43.796728,1.585)); +#252428 = LINE('',#252429,#252430); +#252429 = CARTESIAN_POINT('',(172.727364,-43.796728,1.585)); +#252430 = VECTOR('',#252431,1.); +#252431 = DIRECTION('',(1.,0.,0.)); +#252432 = ORIENTED_EDGE('',*,*,#252433,.T.); +#252433 = EDGE_CURVE('',#252426,#252434,#252436,.T.); +#252434 = VERTEX_POINT('',#252435); +#252435 = CARTESIAN_POINT('',(173.148792,-43.663547,1.585)); +#252436 = CIRCLE('',#252437,0.18686440374); +#252437 = AXIS2_PLACEMENT_3D('',#252438,#252439,#252440); +#252438 = CARTESIAN_POINT('',(172.968075,-43.616011,1.585)); +#252439 = DIRECTION('',(0.,0.,1.)); +#252440 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#252441 = ORIENTED_EDGE('',*,*,#252442,.T.); +#252442 = EDGE_CURVE('',#252434,#252399,#252443,.T.); +#252443 = LINE('',#252444,#252445); +#252444 = CARTESIAN_POINT('',(173.148792,-43.663547,1.585)); +#252445 = VECTOR('',#252446,1.); +#252446 = DIRECTION('',(0.,1.,0.)); +#252447 = PLANE('',#252448); +#252448 = AXIS2_PLACEMENT_3D('',#252449,#252450,#252451); +#252449 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252450 = DIRECTION('',(0.,0.,1.)); +#252451 = DIRECTION('',(1.,0.,-0.)); +#252452 = SHELL_BASED_SURFACE_MODEL('',(#252453)); +#252453 = OPEN_SHELL('',(#252454)); +#252454 = ADVANCED_FACE('',(#252455,#252566),#252618,.T.); +#252455 = FACE_BOUND('',#252456,.F.); +#252456 = EDGE_LOOP('',(#252457,#252468,#252476,#252485,#252493,#252502, + #252510,#252518,#252527,#252535,#252543,#252551,#252560)); +#252457 = ORIENTED_EDGE('',*,*,#252458,.T.); +#252458 = EDGE_CURVE('',#252459,#252461,#252463,.T.); +#252459 = VERTEX_POINT('',#252460); +#252460 = CARTESIAN_POINT('',(175.803805,-43.333287,1.585)); +#252461 = VERTEX_POINT('',#252462); +#252462 = CARTESIAN_POINT('',(175.877364,-43.272919,1.585)); +#252463 = CIRCLE('',#252464,7.500074938978E-02); +#252464 = AXIS2_PLACEMENT_3D('',#252465,#252466,#252467); +#252465 = CARTESIAN_POINT('',(175.87736446611,-43.34791974938,1.585)); +#252466 = DIRECTION('',(0.,0.,-1.)); +#252467 = DIRECTION('',(-0.980783081614,0.195101375751,0.)); +#252468 = ORIENTED_EDGE('',*,*,#252469,.T.); +#252469 = EDGE_CURVE('',#252461,#252470,#252472,.T.); +#252470 = VERTEX_POINT('',#252471); +#252471 = CARTESIAN_POINT('',(176.272948,-43.27436,1.585)); +#252472 = LINE('',#252473,#252474); +#252473 = CARTESIAN_POINT('',(175.877364,-43.272919,1.585)); +#252474 = VECTOR('',#252475,1.); +#252475 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#252476 = ORIENTED_EDGE('',*,*,#252477,.T.); +#252477 = EDGE_CURVE('',#252470,#252478,#252480,.T.); +#252478 = VERTEX_POINT('',#252479); +#252479 = CARTESIAN_POINT('',(176.522351,-43.523763,1.585)); +#252480 = CIRCLE('',#252481,0.347870264855); +#252481 = AXIS2_PLACEMENT_3D('',#252482,#252483,#252484); +#252482 = CARTESIAN_POINT('',(176.18562026502,-43.61109073497,1.585)); +#252483 = DIRECTION('',(0.,0.,-1.)); +#252484 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#252485 = ORIENTED_EDGE('',*,*,#252486,.T.); +#252486 = EDGE_CURVE('',#252478,#252487,#252489,.T.); +#252487 = VERTEX_POINT('',#252488); +#252488 = CARTESIAN_POINT('',(176.521129,-43.701062,1.585)); +#252489 = LINE('',#252490,#252491); +#252490 = CARTESIAN_POINT('',(176.522351,-43.523763,1.585)); +#252491 = VECTOR('',#252492,1.); +#252492 = DIRECTION('',(-6.892148157052E-03,-0.999976248865,0.)); +#252493 = ORIENTED_EDGE('',*,*,#252494,.T.); +#252494 = EDGE_CURVE('',#252487,#252495,#252497,.T.); +#252495 = VERTEX_POINT('',#252496); +#252496 = CARTESIAN_POINT('',(176.272948,-43.945287,1.585)); +#252497 = CIRCLE('',#252498,0.348632345849); +#252498 = AXIS2_PLACEMENT_3D('',#252499,#252500,#252501); +#252499 = CARTESIAN_POINT('',(176.18517919403,-43.6078834593,1.585)); +#252500 = DIRECTION('',(0.,0.,-1.)); +#252501 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#252502 = ORIENTED_EDGE('',*,*,#252503,.T.); +#252503 = EDGE_CURVE('',#252495,#252504,#252506,.T.); +#252504 = VERTEX_POINT('',#252505); +#252505 = CARTESIAN_POINT('',(176.259431,-43.946618,1.585)); +#252506 = LINE('',#252507,#252508); +#252507 = CARTESIAN_POINT('',(176.272948,-43.945287,1.585)); +#252508 = VECTOR('',#252509,1.); +#252509 = DIRECTION('',(-0.995186940545,-9.799465989975E-02,0.)); +#252510 = ORIENTED_EDGE('',*,*,#252511,.T.); +#252511 = EDGE_CURVE('',#252504,#252512,#252514,.T.); +#252512 = VERTEX_POINT('',#252513); +#252513 = CARTESIAN_POINT('',(176.517445,-44.317723,1.585)); +#252514 = LINE('',#252515,#252516); +#252515 = CARTESIAN_POINT('',(176.259431,-43.946618,1.585)); +#252516 = VECTOR('',#252517,1.); +#252517 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#252518 = ORIENTED_EDGE('',*,*,#252519,.T.); +#252519 = EDGE_CURVE('',#252512,#252520,#252522,.T.); +#252520 = VERTEX_POINT('',#252521); +#252521 = CARTESIAN_POINT('',(176.38735,-44.390929,1.585)); +#252522 = CIRCLE('',#252523,7.500005951702E-02); +#252523 = AXIS2_PLACEMENT_3D('',#252524,#252525,#252526); +#252524 = CARTESIAN_POINT('',(176.44879206294,-44.34791874739,1.585)); +#252525 = DIRECTION('',(0.,0.,-1.)); +#252526 = DIRECTION('',(0.915371767708,0.402609645791,0.)); +#252527 = ORIENTED_EDGE('',*,*,#252528,.T.); +#252528 = EDGE_CURVE('',#252520,#252529,#252531,.T.); +#252529 = VERTEX_POINT('',#252530); +#252530 = CARTESIAN_POINT('',(176.07641,-43.946728,1.585)); +#252531 = LINE('',#252532,#252533); +#252532 = CARTESIAN_POINT('',(176.38735,-44.390929,1.585)); +#252533 = VECTOR('',#252534,1.); +#252534 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#252535 = ORIENTED_EDGE('',*,*,#252536,.T.); +#252536 = EDGE_CURVE('',#252529,#252537,#252539,.T.); +#252537 = VERTEX_POINT('',#252538); +#252538 = CARTESIAN_POINT('',(175.952364,-43.946728,1.585)); +#252539 = LINE('',#252540,#252541); +#252540 = CARTESIAN_POINT('',(176.07641,-43.946728,1.585)); +#252541 = VECTOR('',#252542,1.); +#252542 = DIRECTION('',(-1.,0.,0.)); +#252543 = ORIENTED_EDGE('',*,*,#252544,.T.); +#252544 = EDGE_CURVE('',#252537,#252545,#252547,.T.); +#252545 = VERTEX_POINT('',#252546); +#252546 = CARTESIAN_POINT('',(175.950923,-44.362551,1.585)); +#252547 = LINE('',#252548,#252549); +#252548 = CARTESIAN_POINT('',(175.952364,-43.946728,1.585)); +#252549 = VECTOR('',#252550,1.); +#252550 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#252551 = ORIENTED_EDGE('',*,*,#252552,.T.); +#252552 = EDGE_CURVE('',#252545,#252553,#252555,.T.); +#252553 = VERTEX_POINT('',#252554); +#252554 = CARTESIAN_POINT('',(175.802364,-44.347919,1.585)); +#252555 = CIRCLE('',#252556,7.500006711463E-02); +#252556 = AXIS2_PLACEMENT_3D('',#252557,#252558,#252559); +#252557 = CARTESIAN_POINT('',(175.87736406711,-44.34791906711,1.585)); +#252558 = DIRECTION('',(-0.,0.,-1.)); +#252559 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#252560 = ORIENTED_EDGE('',*,*,#252561,.T.); +#252561 = EDGE_CURVE('',#252553,#252459,#252562,.T.); +#252562 = LINE('',#252563,#252564); +#252563 = CARTESIAN_POINT('',(175.802364,-44.347919,1.585)); +#252564 = VECTOR('',#252565,1.); +#252565 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#252566 = FACE_BOUND('',#252567,.F.); +#252567 = EDGE_LOOP('',(#252568,#252579,#252587,#252595,#252603,#252612) + ); +#252568 = ORIENTED_EDGE('',*,*,#252569,.T.); +#252569 = EDGE_CURVE('',#252570,#252572,#252574,.T.); +#252570 = VERTEX_POINT('',#252571); +#252571 = CARTESIAN_POINT('',(176.373792,-43.5561,1.585)); +#252572 = VERTEX_POINT('',#252573); +#252573 = CARTESIAN_POINT('',(176.240611,-43.422919,1.585)); +#252574 = CIRCLE('',#252575,0.18686440374); +#252575 = AXIS2_PLACEMENT_3D('',#252576,#252577,#252578); +#252576 = CARTESIAN_POINT('',(176.193075,-43.603636,1.585)); +#252577 = DIRECTION('',(0.,0.,1.)); +#252578 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#252579 = ORIENTED_EDGE('',*,*,#252580,.T.); +#252580 = EDGE_CURVE('',#252572,#252581,#252583,.T.); +#252581 = VERTEX_POINT('',#252582); +#252582 = CARTESIAN_POINT('',(175.952364,-43.422919,1.585)); +#252583 = LINE('',#252584,#252585); +#252584 = CARTESIAN_POINT('',(176.240611,-43.422919,1.585)); +#252585 = VECTOR('',#252586,1.); +#252586 = DIRECTION('',(-1.,0.,0.)); +#252587 = ORIENTED_EDGE('',*,*,#252588,.T.); +#252588 = EDGE_CURVE('',#252581,#252589,#252591,.T.); +#252589 = VERTEX_POINT('',#252590); +#252590 = CARTESIAN_POINT('',(175.952364,-43.796728,1.585)); +#252591 = LINE('',#252592,#252593); +#252592 = CARTESIAN_POINT('',(175.952364,-43.422919,1.585)); +#252593 = VECTOR('',#252594,1.); +#252594 = DIRECTION('',(0.,-1.,0.)); +#252595 = ORIENTED_EDGE('',*,*,#252596,.T.); +#252596 = EDGE_CURVE('',#252589,#252597,#252599,.T.); +#252597 = VERTEX_POINT('',#252598); +#252598 = CARTESIAN_POINT('',(176.240611,-43.796728,1.585)); +#252599 = LINE('',#252600,#252601); +#252600 = CARTESIAN_POINT('',(175.952364,-43.796728,1.585)); +#252601 = VECTOR('',#252602,1.); +#252602 = DIRECTION('',(1.,0.,0.)); +#252603 = ORIENTED_EDGE('',*,*,#252604,.T.); +#252604 = EDGE_CURVE('',#252597,#252605,#252607,.T.); +#252605 = VERTEX_POINT('',#252606); +#252606 = CARTESIAN_POINT('',(176.373792,-43.663547,1.585)); +#252607 = CIRCLE('',#252608,0.18686440374); +#252608 = AXIS2_PLACEMENT_3D('',#252609,#252610,#252611); +#252609 = CARTESIAN_POINT('',(176.193075,-43.616011,1.585)); +#252610 = DIRECTION('',(0.,0.,1.)); +#252611 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#252612 = ORIENTED_EDGE('',*,*,#252613,.T.); +#252613 = EDGE_CURVE('',#252605,#252570,#252614,.T.); +#252614 = LINE('',#252615,#252616); +#252615 = CARTESIAN_POINT('',(176.373792,-43.663547,1.585)); +#252616 = VECTOR('',#252617,1.); +#252617 = DIRECTION('',(0.,1.,0.)); +#252618 = PLANE('',#252619); +#252619 = AXIS2_PLACEMENT_3D('',#252620,#252621,#252622); +#252620 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252621 = DIRECTION('',(0.,0.,1.)); +#252622 = DIRECTION('',(1.,0.,-0.)); +#252623 = SHELL_BASED_SURFACE_MODEL('',(#252624)); +#252624 = OPEN_SHELL('',(#252625)); +#252625 = ADVANCED_FACE('',(#252626),#252811,.T.); +#252626 = FACE_BOUND('',#252627,.F.); +#252627 = EDGE_LOOP('',(#252628,#252639,#252647,#252656,#252664,#252673, + #252681,#252690,#252698,#252706,#252714,#252723,#252731,#252740, + #252748,#252757,#252765,#252773,#252781,#252789,#252797,#252805)); +#252628 = ORIENTED_EDGE('',*,*,#252629,.T.); +#252629 = EDGE_CURVE('',#252630,#252632,#252634,.T.); +#252630 = VERTEX_POINT('',#252631); +#252631 = CARTESIAN_POINT('',(167.117602,-43.330381,1.585)); +#252632 = VERTEX_POINT('',#252633); +#252633 = CARTESIAN_POINT('',(167.577365,-43.333178,1.585)); +#252634 = CIRCLE('',#252635,0.460785175821); +#252635 = AXIS2_PLACEMENT_3D('',#252636,#252637,#252638); +#252636 = CARTESIAN_POINT('',(167.34505410897,-43.73111597024,1.585)); +#252637 = DIRECTION('',(0.,0.,-1.)); +#252638 = DIRECTION('',(-0.493618547009,0.869678521092,0.)); +#252639 = ORIENTED_EDGE('',*,*,#252640,.T.); +#252640 = EDGE_CURVE('',#252632,#252641,#252643,.T.); +#252641 = VERTEX_POINT('',#252642); +#252642 = CARTESIAN_POINT('',(167.645676,-43.401489,1.585)); +#252643 = LINE('',#252644,#252645); +#252644 = CARTESIAN_POINT('',(167.577365,-43.333178,1.585)); +#252645 = VECTOR('',#252646,1.); +#252646 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#252647 = ORIENTED_EDGE('',*,*,#252648,.T.); +#252648 = EDGE_CURVE('',#252641,#252649,#252651,.T.); +#252649 = VERTEX_POINT('',#252650); +#252650 = CARTESIAN_POINT('',(167.530283,-43.49619,1.585)); +#252651 = CIRCLE('',#252652,7.500003178656E-02); +#252652 = AXIS2_PLACEMENT_3D('',#252653,#252654,#252655); +#252653 = CARTESIAN_POINT('',(167.58331556212,-43.4431565,1.585)); +#252654 = DIRECTION('',(0.,0.,-1.)); +#252655 = DIRECTION('',(0.83147215258,0.555566431206,0.)); +#252656 = ORIENTED_EDGE('',*,*,#252657,.T.); +#252657 = EDGE_CURVE('',#252649,#252658,#252660,.T.); +#252658 = VERTEX_POINT('',#252659); +#252659 = CARTESIAN_POINT('',(167.495183,-43.46109,1.585)); +#252660 = LINE('',#252661,#252662); +#252661 = CARTESIAN_POINT('',(167.530283,-43.49619,1.585)); +#252662 = VECTOR('',#252663,1.); +#252663 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#252664 = ORIENTED_EDGE('',*,*,#252665,.T.); +#252665 = EDGE_CURVE('',#252658,#252666,#252668,.T.); +#252666 = VERTEX_POINT('',#252667); +#252667 = CARTESIAN_POINT('',(167.195259,-43.46109,1.585)); +#252668 = CIRCLE('',#252669,0.299308637371); +#252669 = AXIS2_PLACEMENT_3D('',#252670,#252671,#252672); +#252670 = CARTESIAN_POINT('',(167.345221,-43.720121,1.585)); +#252671 = DIRECTION('',(0.,0.,1.)); +#252672 = DIRECTION('',(0.501027973389,0.865431089043,-0.)); +#252673 = ORIENTED_EDGE('',*,*,#252674,.T.); +#252674 = EDGE_CURVE('',#252666,#252675,#252677,.T.); +#252675 = VERTEX_POINT('',#252676); +#252676 = CARTESIAN_POINT('',(167.121146,-43.535203,1.585)); +#252677 = LINE('',#252678,#252679); +#252678 = CARTESIAN_POINT('',(167.195259,-43.46109,1.585)); +#252679 = VECTOR('',#252680,1.); +#252680 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#252681 = ORIENTED_EDGE('',*,*,#252682,.T.); +#252682 = EDGE_CURVE('',#252675,#252683,#252685,.T.); +#252683 = VERTEX_POINT('',#252684); +#252684 = CARTESIAN_POINT('',(167.039269,-43.910113,1.585)); +#252685 = CIRCLE('',#252686,0.611712714363); +#252686 = AXIS2_PLACEMENT_3D('',#252687,#252688,#252689); +#252687 = CARTESIAN_POINT('',(167.64767427521,-43.8465876822,1.585)); +#252688 = DIRECTION('',(0.,0.,1.)); +#252689 = DIRECTION('',(-0.860744370444,0.509037453189,0.)); +#252690 = ORIENTED_EDGE('',*,*,#252691,.T.); +#252691 = EDGE_CURVE('',#252683,#252692,#252694,.T.); +#252692 = VERTEX_POINT('',#252693); +#252693 = CARTESIAN_POINT('',(167.082652,-44.083647,1.585)); +#252694 = LINE('',#252695,#252696); +#252695 = CARTESIAN_POINT('',(167.039269,-43.910113,1.585)); +#252696 = VECTOR('',#252697,1.); +#252697 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#252698 = ORIENTED_EDGE('',*,*,#252699,.T.); +#252699 = EDGE_CURVE('',#252692,#252700,#252702,.T.); +#252700 = VERTEX_POINT('',#252701); +#252701 = CARTESIAN_POINT('',(167.121146,-44.160634,1.585)); +#252702 = LINE('',#252703,#252704); +#252703 = CARTESIAN_POINT('',(167.082652,-44.083647,1.585)); +#252704 = VECTOR('',#252705,1.); +#252705 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#252706 = ORIENTED_EDGE('',*,*,#252707,.T.); +#252707 = EDGE_CURVE('',#252700,#252708,#252710,.T.); +#252708 = VERTEX_POINT('',#252709); +#252709 = CARTESIAN_POINT('',(167.195259,-44.234748,1.585)); +#252710 = LINE('',#252711,#252712); +#252711 = CARTESIAN_POINT('',(167.121146,-44.160634,1.585)); +#252712 = VECTOR('',#252713,1.); +#252713 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#252714 = ORIENTED_EDGE('',*,*,#252715,.T.); +#252715 = EDGE_CURVE('',#252708,#252716,#252718,.T.); +#252716 = VERTEX_POINT('',#252717); +#252717 = CARTESIAN_POINT('',(167.495183,-44.234747,1.585)); +#252718 = CIRCLE('',#252719,0.299305962385); +#252719 = AXIS2_PLACEMENT_3D('',#252720,#252721,#252722); +#252720 = CARTESIAN_POINT('',(167.34522013635,-43.97571959093,1.585)); +#252721 = DIRECTION('',(0.,0.,1.)); +#252722 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#252723 = ORIENTED_EDGE('',*,*,#252724,.T.); +#252724 = EDGE_CURVE('',#252716,#252725,#252727,.T.); +#252725 = VERTEX_POINT('',#252726); +#252726 = CARTESIAN_POINT('',(167.541648,-44.19032,1.585)); +#252727 = LINE('',#252728,#252729); +#252728 = CARTESIAN_POINT('',(167.495183,-44.234747,1.585)); +#252729 = VECTOR('',#252730,1.); +#252730 = DIRECTION('',(0.722780013658,0.691078180712,0.)); +#252731 = ORIENTED_EDGE('',*,*,#252732,.T.); +#252732 = EDGE_CURVE('',#252725,#252733,#252735,.T.); +#252733 = VERTEX_POINT('',#252734); +#252734 = CARTESIAN_POINT('',(167.636349,-44.305713,1.585)); +#252735 = CIRCLE('',#252736,7.499993690111E-02); +#252736 = AXIS2_PLACEMENT_3D('',#252737,#252738,#252739); +#252737 = CARTESIAN_POINT('',(167.5833162483,-44.25267982374,1.585)); +#252738 = DIRECTION('',(0.,0.,-1.)); +#252739 = DIRECTION('',(-0.555577111536,0.831465016184,0.)); +#252740 = ORIENTED_EDGE('',*,*,#252741,.T.); +#252741 = EDGE_CURVE('',#252733,#252742,#252744,.T.); +#252742 = VERTEX_POINT('',#252743); +#252743 = CARTESIAN_POINT('',(167.572839,-44.365457,1.585)); +#252744 = LINE('',#252745,#252746); +#252745 = CARTESIAN_POINT('',(167.636349,-44.305713,1.585)); +#252746 = VECTOR('',#252747,1.); +#252747 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#252748 = ORIENTED_EDGE('',*,*,#252749,.T.); +#252749 = EDGE_CURVE('',#252742,#252750,#252752,.T.); +#252750 = VERTEX_POINT('',#252751); +#252751 = CARTESIAN_POINT('',(167.113077,-44.362661,1.585)); +#252752 = CIRCLE('',#252753,0.461067828848); +#252753 = AXIS2_PLACEMENT_3D('',#252754,#252755,#252756); +#252754 = CARTESIAN_POINT('',(167.34538851268,-43.96439613352,1.585)); +#252755 = DIRECTION('',(-0.,0.,-1.)); +#252756 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#252757 = ORIENTED_EDGE('',*,*,#252758,.T.); +#252758 = EDGE_CURVE('',#252750,#252759,#252761,.T.); +#252759 = VERTEX_POINT('',#252760); +#252760 = CARTESIAN_POINT('',(166.996388,-44.244898,1.585)); +#252761 = LINE('',#252762,#252763); +#252762 = CARTESIAN_POINT('',(167.113077,-44.362661,1.585)); +#252763 = VECTOR('',#252764,1.); +#252764 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#252765 = ORIENTED_EDGE('',*,*,#252766,.T.); +#252766 = EDGE_CURVE('',#252759,#252767,#252769,.T.); +#252767 = VERTEX_POINT('',#252768); +#252768 = CARTESIAN_POINT('',(166.939127,-44.128013,1.585)); +#252769 = LINE('',#252770,#252771); +#252770 = CARTESIAN_POINT('',(166.996388,-44.244898,1.585)); +#252771 = VECTOR('',#252772,1.); +#252772 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#252773 = ORIENTED_EDGE('',*,*,#252774,.T.); +#252774 = EDGE_CURVE('',#252767,#252775,#252777,.T.); +#252775 = VERTEX_POINT('',#252776); +#252776 = CARTESIAN_POINT('',(166.889269,-43.919347,1.585)); +#252777 = LINE('',#252778,#252779); +#252778 = CARTESIAN_POINT('',(166.939127,-44.128013,1.585)); +#252779 = VECTOR('',#252780,1.); +#252780 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#252781 = ORIENTED_EDGE('',*,*,#252782,.T.); +#252782 = EDGE_CURVE('',#252775,#252783,#252785,.T.); +#252783 = VERTEX_POINT('',#252784); +#252784 = CARTESIAN_POINT('',(166.891508,-43.7583,1.585)); +#252785 = LINE('',#252786,#252787); +#252786 = CARTESIAN_POINT('',(166.889269,-43.919347,1.585)); +#252787 = VECTOR('',#252788,1.); +#252788 = DIRECTION('',(1.39014303055E-02,0.999903370449,0.)); +#252789 = ORIENTED_EDGE('',*,*,#252790,.T.); +#252790 = EDGE_CURVE('',#252783,#252791,#252793,.T.); +#252791 = VERTEX_POINT('',#252792); +#252792 = CARTESIAN_POINT('',(166.944806,-43.552473,1.585)); +#252793 = LINE('',#252794,#252795); +#252794 = CARTESIAN_POINT('',(166.891508,-43.7583,1.585)); +#252795 = VECTOR('',#252796,1.); +#252796 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#252797 = ORIENTED_EDGE('',*,*,#252798,.T.); +#252798 = EDGE_CURVE('',#252791,#252799,#252801,.T.); +#252799 = VERTEX_POINT('',#252800); +#252800 = CARTESIAN_POINT('',(167.001755,-43.443492,1.585)); +#252801 = LINE('',#252802,#252803); +#252802 = CARTESIAN_POINT('',(166.944806,-43.552473,1.585)); +#252803 = VECTOR('',#252804,1.); +#252804 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#252805 = ORIENTED_EDGE('',*,*,#252806,.T.); +#252806 = EDGE_CURVE('',#252799,#252630,#252807,.T.); +#252807 = LINE('',#252808,#252809); +#252808 = CARTESIAN_POINT('',(167.001755,-43.443492,1.585)); +#252809 = VECTOR('',#252810,1.); +#252810 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#252811 = PLANE('',#252812); +#252812 = AXIS2_PLACEMENT_3D('',#252813,#252814,#252815); +#252813 = CARTESIAN_POINT('',(0.,0.,1.585)); +#252814 = DIRECTION('',(0.,0.,1.)); +#252815 = DIRECTION('',(1.,0.,-0.)); +#252816 = SHELL_BASED_SURFACE_MODEL('',(#252817)); +#252817 = OPEN_SHELL('',(#252818)); +#252818 = ADVANCED_FACE('',(#252819,#252937),#253005,.T.); +#252819 = FACE_BOUND('',#252820,.F.); +#252820 = EDGE_LOOP('',(#252821,#252832,#252840,#252848,#252857,#252865, + #252874,#252882,#252890,#252899,#252907,#252915,#252923,#252931)); +#252821 = ORIENTED_EDGE('',*,*,#252822,.T.); +#252822 = EDGE_CURVE('',#252823,#252825,#252827,.T.); +#252823 = VERTEX_POINT('',#252824); +#252824 = CARTESIAN_POINT('',(167.97022,-43.285559,1.585)); +#252825 = VERTEX_POINT('',#252826); +#252826 = CARTESIAN_POINT('',(168.086888,-43.347919,1.585)); +#252827 = CIRCLE('',#252828,7.500000000002E-02); +#252828 = AXIS2_PLACEMENT_3D('',#252829,#252830,#252831); +#252829 = CARTESIAN_POINT('',(168.011888,-43.34791906555,1.585)); +#252830 = DIRECTION('',(0.,0.,-1.)); +#252831 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#252832 = ORIENTED_EDGE('',*,*,#252833,.T.); +#252833 = EDGE_CURVE('',#252825,#252834,#252836,.T.); +#252834 = VERTEX_POINT('',#252835); +#252835 = CARTESIAN_POINT('',(168.087316,-43.608915,1.585)); +#252836 = LINE('',#252837,#252838); +#252837 = CARTESIAN_POINT('',(168.086888,-43.347919,1.585)); +#252838 = VECTOR('',#252839,1.); +#252839 = DIRECTION('',(1.639869670478E-03,-0.999998655413,0.)); +#252840 = ORIENTED_EDGE('',*,*,#252841,.T.); +#252841 = EDGE_CURVE('',#252834,#252842,#252844,.T.); +#252842 = VERTEX_POINT('',#252843); +#252843 = CARTESIAN_POINT('',(168.317411,-43.608915,1.585)); +#252844 = LINE('',#252845,#252846); +#252845 = CARTESIAN_POINT('',(168.087316,-43.608915,1.585)); +#252846 = VECTOR('',#252847,1.); +#252847 = DIRECTION('',(1.,0.,0.)); +#252848 = ORIENTED_EDGE('',*,*,#252849,.T.); +#252849 = EDGE_CURVE('',#252842,#252850,#252852,.T.); +#252850 = VERTEX_POINT('',#252851); +#252851 = CARTESIAN_POINT('',(168.561637,-43.857096,1.585)); +#252852 = CIRCLE('',#252853,0.348625649748); +#252853 = AXIS2_PLACEMENT_3D('',#252854,#252855,#252856); +#252854 = CARTESIAN_POINT('',(168.22423904586,-43.94485968387,1.585)); +#252855 = DIRECTION('',(0.,0.,-1.)); +#252856 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#252857 = ORIENTED_EDGE('',*,*,#252858,.T.); +#252858 = EDGE_CURVE('',#252850,#252859,#252861,.T.); +#252859 = VERTEX_POINT('',#252860); +#252860 = CARTESIAN_POINT('',(168.560415,-44.177252,1.585)); +#252861 = LINE('',#252862,#252863); +#252862 = CARTESIAN_POINT('',(168.561637,-43.857096,1.585)); +#252863 = VECTOR('',#252864,1.); +#252864 = DIRECTION('',(-3.816861463287E-03,-0.999992715758,0.)); +#252865 = ORIENTED_EDGE('',*,*,#252866,.T.); +#252866 = EDGE_CURVE('',#252859,#252867,#252869,.T.); +#252867 = VERTEX_POINT('',#252868); +#252868 = CARTESIAN_POINT('',(168.312234,-44.421478,1.585)); +#252869 = CIRCLE('',#252870,0.348635327447); +#252870 = AXIS2_PLACEMENT_3D('',#252871,#252872,#252873); +#252871 = CARTESIAN_POINT('',(168.22446248129,-44.08407208415,1.585)); +#252872 = DIRECTION('',(0.,0.,-1.)); +#252873 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#252874 = ORIENTED_EDGE('',*,*,#252875,.T.); +#252875 = EDGE_CURVE('',#252867,#252876,#252878,.T.); +#252876 = VERTEX_POINT('',#252877); +#252877 = CARTESIAN_POINT('',(168.087316,-44.420256,1.585)); +#252878 = LINE('',#252879,#252880); +#252879 = CARTESIAN_POINT('',(168.312234,-44.421478,1.585)); +#252880 = VECTOR('',#252881,1.); +#252881 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#252882 = ORIENTED_EDGE('',*,*,#252883,.T.); +#252883 = EDGE_CURVE('',#252876,#252884,#252886,.T.); +#252884 = VERTEX_POINT('',#252885); +#252885 = CARTESIAN_POINT('',(168.057084,-44.40675,1.585)); +#252886 = LINE('',#252887,#252888); +#252887 = CARTESIAN_POINT('',(168.087316,-44.420256,1.585)); +#252888 = VECTOR('',#252889,1.); +#252889 = DIRECTION('',(-0.913030248774,0.407891854325,0.)); +#252890 = ORIENTED_EDGE('',*,*,#252891,.T.); +#252891 = EDGE_CURVE('',#252884,#252892,#252894,.T.); +#252892 = VERTEX_POINT('',#252893); +#252893 = CARTESIAN_POINT('',(167.97022,-44.410279,1.585)); +#252894 = CIRCLE('',#252895,7.226397606087E-02); +#252895 = AXIS2_PLACEMENT_3D('',#252896,#252897,#252898); +#252896 = CARTESIAN_POINT('',(168.01130859538,-44.35083314593,1.585)); +#252897 = DIRECTION('',(-0.,0.,-1.)); +#252898 = DIRECTION('',(0.633447079865,-0.773786015001,-0.)); +#252899 = ORIENTED_EDGE('',*,*,#252900,.T.); +#252900 = EDGE_CURVE('',#252892,#252901,#252903,.T.); +#252901 = VERTEX_POINT('',#252902); +#252902 = CARTESIAN_POINT('',(167.949528,-44.389587,1.585)); +#252903 = LINE('',#252904,#252905); +#252904 = CARTESIAN_POINT('',(167.97022,-44.410279,1.585)); +#252905 = VECTOR('',#252906,1.); +#252906 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#252907 = ORIENTED_EDGE('',*,*,#252908,.T.); +#252908 = EDGE_CURVE('',#252901,#252909,#252911,.T.); +#252909 = VERTEX_POINT('',#252910); +#252910 = CARTESIAN_POINT('',(167.936888,-44.347919,1.585)); +#252911 = LINE('',#252912,#252913); +#252912 = CARTESIAN_POINT('',(167.949528,-44.389587,1.585)); +#252913 = VECTOR('',#252914,1.); +#252914 = DIRECTION('',(-0.290287839989,0.956939376321,0.)); +#252915 = ORIENTED_EDGE('',*,*,#252916,.T.); +#252916 = EDGE_CURVE('',#252909,#252917,#252919,.T.); +#252917 = VERTEX_POINT('',#252918); +#252918 = CARTESIAN_POINT('',(167.938329,-43.333287,1.585)); +#252919 = LINE('',#252920,#252921); +#252920 = CARTESIAN_POINT('',(167.936888,-44.347919,1.585)); +#252921 = VECTOR('',#252922,1.); +#252922 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#252923 = ORIENTED_EDGE('',*,*,#252924,.T.); +#252924 = EDGE_CURVE('',#252917,#252925,#252927,.T.); +#252925 = VERTEX_POINT('',#252926); +#252926 = CARTESIAN_POINT('',(167.949528,-43.306251,1.585)); +#252927 = LINE('',#252928,#252929); +#252928 = CARTESIAN_POINT('',(167.938329,-43.333287,1.585)); +#252929 = VECTOR('',#252930,1.); +#252930 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#252931 = ORIENTED_EDGE('',*,*,#252932,.T.); +#252932 = EDGE_CURVE('',#252925,#252823,#252933,.T.); +#252933 = LINE('',#252934,#252935); +#252934 = CARTESIAN_POINT('',(167.949528,-43.306251,1.585)); +#252935 = VECTOR('',#252936,1.); +#252936 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#252937 = FACE_BOUND('',#252938,.F.); +#252938 = EDGE_LOOP('',(#252939,#252950,#252958,#252966,#252974,#252982, + #252990,#252999)); +#252939 = ORIENTED_EDGE('',*,*,#252940,.T.); +#252940 = EDGE_CURVE('',#252941,#252943,#252945,.T.); +#252941 = VERTEX_POINT('',#252942); +#252942 = CARTESIAN_POINT('',(168.413078,-43.889433,1.585)); +#252943 = VERTEX_POINT('',#252944); +#252944 = CARTESIAN_POINT('',(168.279897,-43.756252,1.585)); +#252945 = CIRCLE('',#252946,0.18686440374); +#252946 = AXIS2_PLACEMENT_3D('',#252947,#252948,#252949); +#252947 = CARTESIAN_POINT('',(168.232361,-43.936969,1.585)); +#252948 = DIRECTION('',(0.,0.,1.)); +#252949 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#252950 = ORIENTED_EDGE('',*,*,#252951,.T.); +#252951 = EDGE_CURVE('',#252943,#252952,#252954,.T.); +#252952 = VERTEX_POINT('',#252953); +#252953 = CARTESIAN_POINT('',(168.124831,-43.756252,1.585)); +#252954 = LINE('',#252955,#252956); +#252955 = CARTESIAN_POINT('',(168.279897,-43.756252,1.585)); +#252956 = VECTOR('',#252957,1.); +#252957 = DIRECTION('',(-1.,0.,0.)); +#252958 = ORIENTED_EDGE('',*,*,#252959,.T.); +#252959 = EDGE_CURVE('',#252952,#252960,#252962,.T.); +#252960 = VERTEX_POINT('',#252961); +#252961 = CARTESIAN_POINT('',(168.086888,-43.775223,1.585)); +#252962 = LINE('',#252963,#252964); +#252963 = CARTESIAN_POINT('',(168.124831,-43.756252,1.585)); +#252964 = VECTOR('',#252965,1.); +#252965 = DIRECTION('',(-0.894431905559,-0.447204166258,0.)); +#252966 = ORIENTED_EDGE('',*,*,#252967,.T.); +#252967 = EDGE_CURVE('',#252960,#252968,#252970,.T.); +#252968 = VERTEX_POINT('',#252969); +#252969 = CARTESIAN_POINT('',(168.086888,-44.253947,1.585)); +#252970 = LINE('',#252971,#252972); +#252971 = CARTESIAN_POINT('',(168.086888,-43.775223,1.585)); +#252972 = VECTOR('',#252973,1.); +#252973 = DIRECTION('',(0.,-1.,0.)); +#252974 = ORIENTED_EDGE('',*,*,#252975,.T.); +#252975 = EDGE_CURVE('',#252968,#252976,#252978,.T.); +#252976 = VERTEX_POINT('',#252977); +#252977 = CARTESIAN_POINT('',(168.124831,-44.272919,1.585)); +#252978 = LINE('',#252979,#252980); +#252979 = CARTESIAN_POINT('',(168.086888,-44.253947,1.585)); +#252980 = VECTOR('',#252981,1.); +#252981 = DIRECTION('',(0.894422476392,-0.447223024592,0.)); +#252982 = ORIENTED_EDGE('',*,*,#252983,.T.); +#252983 = EDGE_CURVE('',#252976,#252984,#252986,.T.); +#252984 = VERTEX_POINT('',#252985); +#252985 = CARTESIAN_POINT('',(168.279897,-44.272919,1.585)); +#252986 = LINE('',#252987,#252988); +#252987 = CARTESIAN_POINT('',(168.124831,-44.272919,1.585)); +#252988 = VECTOR('',#252989,1.); +#252989 = DIRECTION('',(1.,0.,0.)); +#252990 = ORIENTED_EDGE('',*,*,#252991,.T.); +#252991 = EDGE_CURVE('',#252984,#252992,#252994,.T.); +#252992 = VERTEX_POINT('',#252993); +#252993 = CARTESIAN_POINT('',(168.413078,-44.139737,1.585)); +#252994 = CIRCLE('',#252995,0.186867760544); +#252995 = AXIS2_PLACEMENT_3D('',#252996,#252997,#252998); +#252996 = CARTESIAN_POINT('',(168.23235796928,-44.09219932622,1.585)); +#252997 = DIRECTION('',(0.,0.,1.)); +#252998 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#252999 = ORIENTED_EDGE('',*,*,#253000,.T.); +#253000 = EDGE_CURVE('',#252992,#252941,#253001,.T.); +#253001 = LINE('',#253002,#253003); +#253002 = CARTESIAN_POINT('',(168.413078,-44.139737,1.585)); +#253003 = VECTOR('',#253004,1.); +#253004 = DIRECTION('',(0.,1.,0.)); +#253005 = PLANE('',#253006); +#253006 = AXIS2_PLACEMENT_3D('',#253007,#253008,#253009); +#253007 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253008 = DIRECTION('',(0.,0.,1.)); +#253009 = DIRECTION('',(1.,0.,-0.)); +#253010 = SHELL_BASED_SURFACE_MODEL('',(#253011)); +#253011 = OPEN_SHELL('',(#253012)); +#253012 = ADVANCED_FACE('',(#253013),#253298,.T.); +#253013 = FACE_BOUND('',#253014,.F.); +#253014 = EDGE_LOOP('',(#253015,#253025,#253033,#253041,#253050,#253058, + #253066,#253074,#253082,#253090,#253098,#253106,#253114,#253122, + #253130,#253138,#253146,#253154,#253162,#253171,#253179,#253188, + #253196,#253204,#253212,#253220,#253228,#253236,#253244,#253252, + #253260,#253268,#253276,#253284,#253292)); +#253015 = ORIENTED_EDGE('',*,*,#253016,.T.); +#253016 = EDGE_CURVE('',#253017,#253019,#253021,.T.); +#253017 = VERTEX_POINT('',#253018); +#253018 = CARTESIAN_POINT('',(168.883109,-43.661789,1.585)); +#253019 = VERTEX_POINT('',#253020); +#253020 = CARTESIAN_POINT('',(168.997256,-43.607693,1.585)); +#253021 = LINE('',#253022,#253023); +#253022 = CARTESIAN_POINT('',(168.883109,-43.661789,1.585)); +#253023 = VECTOR('',#253024,1.); +#253024 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#253025 = ORIENTED_EDGE('',*,*,#253026,.T.); +#253026 = EDGE_CURVE('',#253019,#253027,#253029,.T.); +#253027 = VERTEX_POINT('',#253028); +#253028 = CARTESIAN_POINT('',(169.169377,-43.607693,1.585)); +#253029 = LINE('',#253030,#253031); +#253030 = CARTESIAN_POINT('',(168.997256,-43.607693,1.585)); +#253031 = VECTOR('',#253032,1.); +#253032 = DIRECTION('',(1.,0.,0.)); +#253033 = ORIENTED_EDGE('',*,*,#253034,.T.); +#253034 = EDGE_CURVE('',#253027,#253035,#253037,.T.); +#253035 = VERTEX_POINT('',#253036); +#253036 = CARTESIAN_POINT('',(169.295967,-43.669621,1.585)); +#253037 = LINE('',#253038,#253039); +#253038 = CARTESIAN_POINT('',(169.169377,-43.607693,1.585)); +#253039 = VECTOR('',#253040,1.); +#253040 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#253041 = ORIENTED_EDGE('',*,*,#253042,.T.); +#253042 = EDGE_CURVE('',#253035,#253043,#253045,.T.); +#253043 = VERTEX_POINT('',#253044); +#253044 = CARTESIAN_POINT('',(169.216442,-43.795953,1.585)); +#253045 = CIRCLE('',#253046,7.50002944036E-02); +#253046 = AXIS2_PLACEMENT_3D('',#253047,#253048,#253049); +#253047 = CARTESIAN_POINT('',(169.24998305397,-43.72887064867,1.585)); +#253048 = DIRECTION('',(0.,0.,-1.)); +#253049 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#253050 = ORIENTED_EDGE('',*,*,#253051,.T.); +#253051 = EDGE_CURVE('',#253043,#253052,#253054,.T.); +#253052 = VERTEX_POINT('',#253053); +#253053 = CARTESIAN_POINT('',(169.13704,-43.756252,1.585)); +#253054 = LINE('',#253055,#253056); +#253055 = CARTESIAN_POINT('',(169.216442,-43.795953,1.585)); +#253056 = VECTOR('',#253057,1.); +#253057 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#253058 = ORIENTED_EDGE('',*,*,#253059,.T.); +#253059 = EDGE_CURVE('',#253052,#253060,#253062,.T.); +#253060 = VERTEX_POINT('',#253061); +#253061 = CARTESIAN_POINT('',(169.029593,-43.756252,1.585)); +#253062 = LINE('',#253063,#253064); +#253063 = CARTESIAN_POINT('',(169.13704,-43.756252,1.585)); +#253064 = VECTOR('',#253065,1.); +#253065 = DIRECTION('',(-1.,0.,0.)); +#253066 = ORIENTED_EDGE('',*,*,#253067,.T.); +#253067 = EDGE_CURVE('',#253060,#253068,#253070,.T.); +#253068 = VERTEX_POINT('',#253069); +#253069 = CARTESIAN_POINT('',(168.972551,-43.784772,1.585)); +#253070 = LINE('',#253071,#253072); +#253071 = CARTESIAN_POINT('',(169.029593,-43.756252,1.585)); +#253072 = VECTOR('',#253073,1.); +#253073 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#253074 = ORIENTED_EDGE('',*,*,#253075,.T.); +#253075 = EDGE_CURVE('',#253068,#253076,#253078,.T.); +#253076 = VERTEX_POINT('',#253077); +#253077 = CARTESIAN_POINT('',(168.944031,-43.841814,1.585)); +#253078 = LINE('',#253079,#253080); +#253079 = CARTESIAN_POINT('',(168.972551,-43.784772,1.585)); +#253080 = VECTOR('',#253081,1.); +#253081 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#253082 = ORIENTED_EDGE('',*,*,#253083,.T.); +#253083 = EDGE_CURVE('',#253076,#253084,#253086,.T.); +#253084 = VERTEX_POINT('',#253085); +#253085 = CARTESIAN_POINT('',(168.944031,-43.854023,1.585)); +#253086 = LINE('',#253087,#253088); +#253087 = CARTESIAN_POINT('',(168.944031,-43.841814,1.585)); +#253088 = VECTOR('',#253089,1.); +#253089 = DIRECTION('',(0.,-1.,0.)); +#253090 = ORIENTED_EDGE('',*,*,#253091,.T.); +#253091 = EDGE_CURVE('',#253084,#253092,#253094,.T.); +#253092 = VERTEX_POINT('',#253093); +#253093 = CARTESIAN_POINT('',(168.972551,-43.911064,1.585)); +#253094 = LINE('',#253095,#253096); +#253095 = CARTESIAN_POINT('',(168.944031,-43.854023,1.585)); +#253096 = VECTOR('',#253097,1.); +#253097 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#253098 = ORIENTED_EDGE('',*,*,#253099,.T.); +#253099 = EDGE_CURVE('',#253092,#253100,#253102,.T.); +#253100 = VERTEX_POINT('',#253101); +#253101 = CARTESIAN_POINT('',(169.029593,-43.939585,1.585)); +#253102 = LINE('',#253103,#253104); +#253103 = CARTESIAN_POINT('',(168.972551,-43.911064,1.585)); +#253104 = VECTOR('',#253105,1.); +#253105 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#253106 = ORIENTED_EDGE('',*,*,#253107,.T.); +#253107 = EDGE_CURVE('',#253100,#253108,#253110,.T.); +#253108 = VERTEX_POINT('',#253109); +#253109 = CARTESIAN_POINT('',(169.174554,-43.942248,1.585)); +#253110 = LINE('',#253111,#253112); +#253111 = CARTESIAN_POINT('',(169.029593,-43.939585,1.585)); +#253112 = VECTOR('',#253113,1.); +#253113 = DIRECTION('',(0.999831305828,-1.836735927193E-02,0.)); +#253114 = ORIENTED_EDGE('',*,*,#253115,.T.); +#253115 = EDGE_CURVE('',#253108,#253116,#253118,.T.); +#253116 = VERTEX_POINT('',#253117); +#253117 = CARTESIAN_POINT('',(169.295967,-44.002954,1.585)); +#253118 = LINE('',#253119,#253120); +#253119 = CARTESIAN_POINT('',(169.174554,-43.942248,1.585)); +#253120 = VECTOR('',#253121,1.); +#253121 = DIRECTION('',(0.894428664361,-0.447210648766,0.)); +#253122 = ORIENTED_EDGE('',*,*,#253123,.T.); +#253123 = EDGE_CURVE('',#253116,#253124,#253126,.T.); +#253124 = VERTEX_POINT('',#253125); +#253125 = CARTESIAN_POINT('',(169.317065,-44.028663,1.585)); +#253126 = LINE('',#253127,#253128); +#253127 = CARTESIAN_POINT('',(169.295967,-44.002954,1.585)); +#253128 = VECTOR('',#253129,1.); +#253129 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#253130 = ORIENTED_EDGE('',*,*,#253131,.T.); +#253131 = EDGE_CURVE('',#253124,#253132,#253134,.T.); +#253132 = VERTEX_POINT('',#253133); +#253133 = CARTESIAN_POINT('',(169.371161,-44.14281,1.585)); +#253134 = LINE('',#253135,#253136); +#253135 = CARTESIAN_POINT('',(169.317065,-44.028663,1.585)); +#253136 = VECTOR('',#253137,1.); +#253137 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#253138 = ORIENTED_EDGE('',*,*,#253139,.T.); +#253139 = EDGE_CURVE('',#253132,#253140,#253142,.T.); +#253140 = VERTEX_POINT('',#253141); +#253141 = CARTESIAN_POINT('',(169.369939,-44.22487,1.585)); +#253142 = LINE('',#253143,#253144); +#253143 = CARTESIAN_POINT('',(169.371161,-44.14281,1.585)); +#253144 = VECTOR('',#253145,1.); +#253145 = DIRECTION('',(-1.488989188859E-02,-0.999889139415,0.)); +#253146 = ORIENTED_EDGE('',*,*,#253147,.T.); +#253147 = EDGE_CURVE('',#253140,#253148,#253150,.T.); +#253148 = VERTEX_POINT('',#253149); +#253149 = CARTESIAN_POINT('',(169.309233,-44.346284,1.585)); +#253150 = LINE('',#253151,#253152); +#253151 = CARTESIAN_POINT('',(169.369939,-44.22487,1.585)); +#253152 = VECTOR('',#253153,1.); +#253153 = DIRECTION('',(-0.447207702067,-0.894430137692,0.)); +#253154 = ORIENTED_EDGE('',*,*,#253155,.T.); +#253155 = EDGE_CURVE('',#253148,#253156,#253158,.T.); +#253156 = VERTEX_POINT('',#253157); +#253157 = CARTESIAN_POINT('',(169.283524,-44.367382,1.585)); +#253158 = LINE('',#253159,#253160); +#253159 = CARTESIAN_POINT('',(169.309233,-44.346284,1.585)); +#253160 = VECTOR('',#253161,1.); +#253161 = DIRECTION('',(-0.773022706982,-0.634378352791,0.)); +#253162 = ORIENTED_EDGE('',*,*,#253163,.T.); +#253163 = EDGE_CURVE('',#253156,#253164,#253166,.T.); +#253164 = VERTEX_POINT('',#253165); +#253165 = CARTESIAN_POINT('',(168.823047,-44.35955,1.585)); +#253166 = CIRCLE('',#253167,0.396588066051); +#253167 = AXIS2_PLACEMENT_3D('',#253168,#253169,#253170); +#253168 = CARTESIAN_POINT('',(169.05877653893,-44.04062418008,1.585)); +#253169 = DIRECTION('',(-0.,0.,-1.)); +#253170 = DIRECTION('',(0.566702531691,-0.82392247243,-0.)); +#253171 = ORIENTED_EDGE('',*,*,#253172,.T.); +#253172 = EDGE_CURVE('',#253164,#253173,#253175,.T.); +#253173 = VERTEX_POINT('',#253174); +#253174 = CARTESIAN_POINT('',(168.803874,-44.337442,1.585)); +#253175 = LINE('',#253176,#253177); +#253176 = CARTESIAN_POINT('',(168.823047,-44.35955,1.585)); +#253177 = VECTOR('',#253178,1.); +#253178 = DIRECTION('',(-0.655178986933,0.755473689205,0.)); +#253179 = ORIENTED_EDGE('',*,*,#253180,.T.); +#253180 = EDGE_CURVE('',#253173,#253181,#253183,.T.); +#253181 = VERTEX_POINT('',#253182); +#253182 = CARTESIAN_POINT('',(168.902572,-44.233218,1.585)); +#253183 = CIRCLE('',#253184,7.499954050662E-02); +#253184 = AXIS2_PLACEMENT_3D('',#253185,#253186,#253187); +#253185 = CARTESIAN_POINT('',(168.86903028896,-44.3002991799,1.585)); +#253186 = DIRECTION('',(0.,0.,-1.)); +#253187 = DIRECTION('',(-0.868755841989,-0.495240635459,-0.)); +#253188 = ORIENTED_EDGE('',*,*,#253189,.T.); +#253189 = EDGE_CURVE('',#253181,#253190,#253192,.T.); +#253190 = VERTEX_POINT('',#253191); +#253191 = CARTESIAN_POINT('',(168.981974,-44.272919,1.585)); +#253192 = LINE('',#253193,#253194); +#253193 = CARTESIAN_POINT('',(168.902572,-44.233218,1.585)); +#253194 = VECTOR('',#253195,1.); +#253195 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#253196 = ORIENTED_EDGE('',*,*,#253197,.T.); +#253197 = EDGE_CURVE('',#253190,#253198,#253200,.T.); +#253198 = VERTEX_POINT('',#253199); +#253199 = CARTESIAN_POINT('',(169.13704,-44.272919,1.585)); +#253200 = LINE('',#253201,#253202); +#253201 = CARTESIAN_POINT('',(168.981974,-44.272919,1.585)); +#253202 = VECTOR('',#253203,1.); +#253203 = DIRECTION('',(1.,0.,0.)); +#253204 = ORIENTED_EDGE('',*,*,#253205,.T.); +#253205 = EDGE_CURVE('',#253198,#253206,#253208,.T.); +#253206 = VERTEX_POINT('',#253207); +#253207 = CARTESIAN_POINT('',(169.194081,-44.244398,1.585)); +#253208 = LINE('',#253209,#253210); +#253209 = CARTESIAN_POINT('',(169.13704,-44.272919,1.585)); +#253210 = VECTOR('',#253211,1.); +#253211 = DIRECTION('',(0.894424054904,0.447219867638,0.)); +#253212 = ORIENTED_EDGE('',*,*,#253213,.T.); +#253213 = EDGE_CURVE('',#253206,#253214,#253216,.T.); +#253214 = VERTEX_POINT('',#253215); +#253215 = CARTESIAN_POINT('',(169.222602,-44.187356,1.585)); +#253216 = LINE('',#253217,#253218); +#253217 = CARTESIAN_POINT('',(169.194081,-44.244398,1.585)); +#253218 = VECTOR('',#253219,1.); +#253219 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#253220 = ORIENTED_EDGE('',*,*,#253221,.T.); +#253221 = EDGE_CURVE('',#253214,#253222,#253224,.T.); +#253222 = VERTEX_POINT('',#253223); +#253223 = CARTESIAN_POINT('',(169.222602,-44.175147,1.585)); +#253224 = LINE('',#253225,#253226); +#253225 = CARTESIAN_POINT('',(169.222602,-44.187356,1.585)); +#253226 = VECTOR('',#253227,1.); +#253227 = DIRECTION('',(0.,1.,0.)); +#253228 = ORIENTED_EDGE('',*,*,#253229,.T.); +#253229 = EDGE_CURVE('',#253222,#253230,#253232,.T.); +#253230 = VERTEX_POINT('',#253231); +#253231 = CARTESIAN_POINT('',(169.194081,-44.118105,1.585)); +#253232 = LINE('',#253233,#253234); +#253233 = CARTESIAN_POINT('',(169.222602,-44.175147,1.585)); +#253234 = VECTOR('',#253235,1.); +#253235 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#253236 = ORIENTED_EDGE('',*,*,#253237,.T.); +#253237 = EDGE_CURVE('',#253230,#253238,#253240,.T.); +#253238 = VERTEX_POINT('',#253239); +#253239 = CARTESIAN_POINT('',(169.13704,-44.089585,1.585)); +#253240 = LINE('',#253241,#253242); +#253241 = CARTESIAN_POINT('',(169.194081,-44.118105,1.585)); +#253242 = VECTOR('',#253243,1.); +#253243 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#253244 = ORIENTED_EDGE('',*,*,#253245,.T.); +#253245 = EDGE_CURVE('',#253238,#253246,#253248,.T.); +#253246 = VERTEX_POINT('',#253247); +#253247 = CARTESIAN_POINT('',(168.992078,-44.086922,1.585)); +#253248 = LINE('',#253249,#253250); +#253249 = CARTESIAN_POINT('',(169.13704,-44.089585,1.585)); +#253250 = VECTOR('',#253251,1.); +#253251 = DIRECTION('',(-0.999831308155,1.836723261002E-02,0.)); +#253252 = ORIENTED_EDGE('',*,*,#253253,.T.); +#253253 = EDGE_CURVE('',#253246,#253254,#253256,.T.); +#253254 = VERTEX_POINT('',#253255); +#253255 = CARTESIAN_POINT('',(168.870666,-44.026216,1.585)); +#253256 = LINE('',#253257,#253258); +#253257 = CARTESIAN_POINT('',(168.992078,-44.086922,1.585)); +#253258 = VECTOR('',#253259,1.); +#253259 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#253260 = ORIENTED_EDGE('',*,*,#253261,.T.); +#253261 = EDGE_CURVE('',#253254,#253262,#253264,.T.); +#253262 = VERTEX_POINT('',#253263); +#253263 = CARTESIAN_POINT('',(168.849568,-44.000507,1.585)); +#253264 = LINE('',#253265,#253266); +#253265 = CARTESIAN_POINT('',(168.870666,-44.026216,1.585)); +#253266 = VECTOR('',#253267,1.); +#253267 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#253268 = ORIENTED_EDGE('',*,*,#253269,.T.); +#253269 = EDGE_CURVE('',#253262,#253270,#253272,.T.); +#253270 = VERTEX_POINT('',#253271); +#253271 = CARTESIAN_POINT('',(168.795472,-43.88636,1.585)); +#253272 = LINE('',#253273,#253274); +#253273 = CARTESIAN_POINT('',(168.849568,-44.000507,1.585)); +#253274 = VECTOR('',#253275,1.); +#253275 = DIRECTION('',(-0.428256830769,0.903657062662,0.)); +#253276 = ORIENTED_EDGE('',*,*,#253277,.T.); +#253277 = EDGE_CURVE('',#253270,#253278,#253280,.T.); +#253278 = VERTEX_POINT('',#253279); +#253279 = CARTESIAN_POINT('',(168.796694,-43.8043,1.585)); +#253280 = LINE('',#253281,#253282); +#253281 = CARTESIAN_POINT('',(168.795472,-43.88636,1.585)); +#253282 = VECTOR('',#253283,1.); +#253283 = DIRECTION('',(1.488989188859E-02,0.999889139415,0.)); +#253284 = ORIENTED_EDGE('',*,*,#253285,.T.); +#253285 = EDGE_CURVE('',#253278,#253286,#253288,.T.); +#253286 = VERTEX_POINT('',#253287); +#253287 = CARTESIAN_POINT('',(168.8574,-43.682887,1.585)); +#253288 = LINE('',#253289,#253290); +#253289 = CARTESIAN_POINT('',(168.796694,-43.8043,1.585)); +#253290 = VECTOR('',#253291,1.); +#253291 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#253292 = ORIENTED_EDGE('',*,*,#253293,.T.); +#253293 = EDGE_CURVE('',#253286,#253017,#253294,.T.); +#253294 = LINE('',#253295,#253296); +#253295 = CARTESIAN_POINT('',(168.8574,-43.682887,1.585)); +#253296 = VECTOR('',#253297,1.); +#253297 = DIRECTION('',(0.773022706982,0.634378352792,0.)); +#253298 = PLANE('',#253299); +#253299 = AXIS2_PLACEMENT_3D('',#253300,#253301,#253302); +#253300 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253301 = DIRECTION('',(0.,0.,1.)); +#253302 = DIRECTION('',(1.,0.,-0.)); +#253303 = SHELL_BASED_SURFACE_MODEL('',(#253304)); +#253304 = OPEN_SHELL('',(#253305)); +#253305 = ADVANCED_FACE('',(#253306,#253408),#253510,.T.); +#253306 = FACE_BOUND('',#253307,.F.); +#253307 = EDGE_LOOP('',(#253308,#253319,#253327,#253335,#253344,#253352, + #253360,#253369,#253377,#253385,#253394,#253402)); +#253308 = ORIENTED_EDGE('',*,*,#253309,.T.); +#253309 = EDGE_CURVE('',#253310,#253312,#253314,.T.); +#253310 = VERTEX_POINT('',#253311); +#253311 = CARTESIAN_POINT('',(174.660142,-43.33242,1.585)); +#253312 = VERTEX_POINT('',#253313); +#253313 = CARTESIAN_POINT('',(175.03298,-43.337786,1.585)); +#253314 = CIRCLE('',#253315,0.291788488016); +#253315 = AXIS2_PLACEMENT_3D('',#253316,#253317,#253318); +#253316 = CARTESIAN_POINT('',(174.84333086911,-43.55953750256,1.585)); +#253317 = DIRECTION('',(0.,0.,-1.)); +#253318 = DIRECTION('',(-0.627813901623,0.778363478671,0.)); +#253319 = ORIENTED_EDGE('',*,*,#253320,.T.); +#253320 = EDGE_CURVE('',#253312,#253321,#253323,.T.); +#253321 = VERTEX_POINT('',#253322); +#253322 = CARTESIAN_POINT('',(175.096433,-43.403316,1.585)); +#253323 = LINE('',#253324,#253325); +#253324 = CARTESIAN_POINT('',(175.03298,-43.337786,1.585)); +#253325 = VECTOR('',#253326,1.); +#253326 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#253327 = ORIENTED_EDGE('',*,*,#253328,.T.); +#253328 = EDGE_CURVE('',#253321,#253329,#253331,.T.); +#253329 = VERTEX_POINT('',#253330); +#253330 = CARTESIAN_POINT('',(175.153696,-43.520205,1.585)); +#253331 = LINE('',#253332,#253333); +#253332 = CARTESIAN_POINT('',(175.096433,-43.403316,1.585)); +#253333 = VECTOR('',#253334,1.); +#253334 = DIRECTION('',(0.439937123831,-0.898028578095,0.)); +#253335 = ORIENTED_EDGE('',*,*,#253336,.T.); +#253336 = EDGE_CURVE('',#253329,#253337,#253339,.T.); +#253337 = VERTEX_POINT('',#253338); +#253338 = CARTESIAN_POINT('',(175.148017,-44.190983,1.585)); +#253339 = CIRCLE('',#253340,0.967158496826); +#253340 = AXIS2_PLACEMENT_3D('',#253341,#253342,#253343); +#253341 = CARTESIAN_POINT('',(174.24374970686,-43.84791417228,1.585)); +#253342 = DIRECTION('',(0.,0.,-1.)); +#253343 = DIRECTION('',(0.940845059128,0.338837091703,0.)); +#253344 = ORIENTED_EDGE('',*,*,#253345,.T.); +#253345 = EDGE_CURVE('',#253337,#253346,#253348,.T.); +#253346 = VERTEX_POINT('',#253347); +#253347 = CARTESIAN_POINT('',(175.091067,-44.299963,1.585)); +#253348 = LINE('',#253349,#253350); +#253349 = CARTESIAN_POINT('',(175.148017,-44.190983,1.585)); +#253350 = VECTOR('',#253351,1.); +#253351 = DIRECTION('',(-0.463146784148,-0.886281589752,0.)); +#253352 = ORIENTED_EDGE('',*,*,#253353,.T.); +#253353 = EDGE_CURVE('',#253346,#253354,#253356,.T.); +#253354 = VERTEX_POINT('',#253355); +#253355 = CARTESIAN_POINT('',(175.025537,-44.363417,1.585)); +#253356 = LINE('',#253357,#253358); +#253357 = CARTESIAN_POINT('',(175.091067,-44.299963,1.585)); +#253358 = VECTOR('',#253359,1.); +#253359 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#253360 = ORIENTED_EDGE('',*,*,#253361,.T.); +#253361 = EDGE_CURVE('',#253354,#253362,#253364,.T.); +#253362 = VERTEX_POINT('',#253363); +#253363 = CARTESIAN_POINT('',(174.652698,-44.35805,1.585)); +#253364 = CIRCLE('',#253365,0.290998264264); +#253365 = AXIS2_PLACEMENT_3D('',#253366,#253367,#253368); +#253366 = CARTESIAN_POINT('',(174.84233341815,-44.13732755441,1.585)); +#253367 = DIRECTION('',(-0.,0.,-1.)); +#253368 = DIRECTION('',(0.629569328552,-0.776944309811,-0.)); +#253369 = ORIENTED_EDGE('',*,*,#253370,.T.); +#253370 = EDGE_CURVE('',#253362,#253371,#253373,.T.); +#253371 = VERTEX_POINT('',#253372); +#253372 = CARTESIAN_POINT('',(174.589245,-44.292517,1.585)); +#253373 = LINE('',#253374,#253375); +#253374 = CARTESIAN_POINT('',(174.652698,-44.35805,1.585)); +#253375 = VECTOR('',#253376,1.); +#253376 = DIRECTION('',(-0.695613693927,0.718416027676,0.)); +#253377 = ORIENTED_EDGE('',*,*,#253378,.T.); +#253378 = EDGE_CURVE('',#253371,#253379,#253381,.T.); +#253379 = VERTEX_POINT('',#253380); +#253380 = CARTESIAN_POINT('',(174.531984,-44.175632,1.585)); +#253381 = LINE('',#253382,#253383); +#253382 = CARTESIAN_POINT('',(174.589245,-44.292517,1.585)); +#253383 = VECTOR('',#253384,1.); +#253384 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#253385 = ORIENTED_EDGE('',*,*,#253386,.T.); +#253386 = EDGE_CURVE('',#253379,#253387,#253389,.T.); +#253387 = VERTEX_POINT('',#253388); +#253388 = CARTESIAN_POINT('',(174.537663,-43.504854,1.585)); +#253389 = CIRCLE('',#253390,0.967158496826); +#253390 = AXIS2_PLACEMENT_3D('',#253391,#253392,#253393); +#253391 = CARTESIAN_POINT('',(175.44193029313,-43.84792282772,1.585)); +#253392 = DIRECTION('',(0.,0.,-1.)); +#253393 = DIRECTION('',(-0.940845059128,-0.338837091703,-0.)); +#253394 = ORIENTED_EDGE('',*,*,#253395,.T.); +#253395 = EDGE_CURVE('',#253387,#253396,#253398,.T.); +#253396 = VERTEX_POINT('',#253397); +#253397 = CARTESIAN_POINT('',(174.594612,-43.395873,1.585)); +#253398 = LINE('',#253399,#253400); +#253399 = CARTESIAN_POINT('',(174.537663,-43.504854,1.585)); +#253400 = VECTOR('',#253401,1.); +#253401 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#253402 = ORIENTED_EDGE('',*,*,#253403,.T.); +#253403 = EDGE_CURVE('',#253396,#253310,#253404,.T.); +#253404 = LINE('',#253405,#253406); +#253405 = CARTESIAN_POINT('',(174.594612,-43.395873,1.585)); +#253406 = VECTOR('',#253407,1.); +#253407 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#253408 = FACE_BOUND('',#253409,.F.); +#253409 = EDGE_LOOP('',(#253410,#253421,#253429,#253437,#253446,#253454, + #253462,#253471,#253479,#253487,#253496,#253504)); +#253410 = ORIENTED_EDGE('',*,*,#253411,.T.); +#253411 = EDGE_CURVE('',#253412,#253414,#253416,.T.); +#253412 = VERTEX_POINT('',#253413); +#253413 = CARTESIAN_POINT('',(174.94127,-43.457177,1.585)); +#253414 = VERTEX_POINT('',#253415); +#253415 = CARTESIAN_POINT('',(174.74441,-43.457177,1.585)); +#253416 = CIRCLE('',#253417,0.148516804184); +#253417 = AXIS2_PLACEMENT_3D('',#253418,#253419,#253420); +#253418 = CARTESIAN_POINT('',(174.84284,-43.568392,1.585)); +#253419 = DIRECTION('',(0.,0.,1.)); +#253420 = DIRECTION('',(0.662753286006,0.748837820818,-0.)); +#253421 = ORIENTED_EDGE('',*,*,#253422,.T.); +#253422 = EDGE_CURVE('',#253414,#253423,#253425,.T.); +#253423 = VERTEX_POINT('',#253424); +#253424 = CARTESIAN_POINT('',(174.714003,-43.487584,1.585)); +#253425 = LINE('',#253426,#253427); +#253426 = CARTESIAN_POINT('',(174.74441,-43.457177,1.585)); +#253427 = VECTOR('',#253428,1.); +#253428 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#253429 = ORIENTED_EDGE('',*,*,#253430,.T.); +#253430 = EDGE_CURVE('',#253423,#253431,#253433,.T.); +#253431 = VERTEX_POINT('',#253432); +#253432 = CARTESIAN_POINT('',(174.675509,-43.564571,1.585)); +#253433 = LINE('',#253434,#253435); +#253434 = CARTESIAN_POINT('',(174.714003,-43.487584,1.585)); +#253435 = VECTOR('',#253436,1.); +#253436 = DIRECTION('',(-0.447218242641,-0.894424867414,0.)); +#253437 = ORIENTED_EDGE('',*,*,#253438,.T.); +#253438 = EDGE_CURVE('',#253431,#253439,#253441,.T.); +#253439 = VERTEX_POINT('',#253440); +#253440 = CARTESIAN_POINT('',(174.675509,-44.131266,1.585)); +#253441 = CIRCLE('',#253442,0.815450468383); +#253442 = AXIS2_PLACEMENT_3D('',#253443,#253444,#253445); +#253443 = CARTESIAN_POINT('',(175.44014856255,-43.8479185,1.585)); +#253444 = DIRECTION('',(0.,0.,1.)); +#253445 = DIRECTION('',(-0.937689770508,0.347473587895,0.)); +#253446 = ORIENTED_EDGE('',*,*,#253447,.T.); +#253447 = EDGE_CURVE('',#253439,#253448,#253450,.T.); +#253448 = VERTEX_POINT('',#253449); +#253449 = CARTESIAN_POINT('',(174.714003,-44.208253,1.585)); +#253450 = LINE('',#253451,#253452); +#253451 = CARTESIAN_POINT('',(174.675509,-44.131266,1.585)); +#253452 = VECTOR('',#253453,1.); +#253453 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#253454 = ORIENTED_EDGE('',*,*,#253455,.T.); +#253455 = EDGE_CURVE('',#253448,#253456,#253458,.T.); +#253456 = VERTEX_POINT('',#253457); +#253457 = CARTESIAN_POINT('',(174.74441,-44.238661,1.585)); +#253458 = LINE('',#253459,#253460); +#253459 = CARTESIAN_POINT('',(174.714003,-44.208253,1.585)); +#253460 = VECTOR('',#253461,1.); +#253461 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#253462 = ORIENTED_EDGE('',*,*,#253463,.T.); +#253463 = EDGE_CURVE('',#253456,#253464,#253466,.T.); +#253464 = VERTEX_POINT('',#253465); +#253465 = CARTESIAN_POINT('',(174.941269,-44.238661,1.585)); +#253466 = CIRCLE('',#253467,0.14851572397); +#253467 = AXIS2_PLACEMENT_3D('',#253468,#253469,#253470); +#253468 = CARTESIAN_POINT('',(174.8428395,-44.127447,1.585)); +#253469 = DIRECTION('',(0.,0.,1.)); +#253470 = DIRECTION('',(-0.662754739828,-0.748836534121,0.)); +#253471 = ORIENTED_EDGE('',*,*,#253472,.T.); +#253472 = EDGE_CURVE('',#253464,#253473,#253475,.T.); +#253473 = VERTEX_POINT('',#253474); +#253474 = CARTESIAN_POINT('',(174.971676,-44.208253,1.585)); +#253475 = LINE('',#253476,#253477); +#253476 = CARTESIAN_POINT('',(174.941269,-44.238661,1.585)); +#253477 = VECTOR('',#253478,1.); +#253478 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#253479 = ORIENTED_EDGE('',*,*,#253480,.T.); +#253480 = EDGE_CURVE('',#253473,#253481,#253483,.T.); +#253481 = VERTEX_POINT('',#253482); +#253482 = CARTESIAN_POINT('',(175.01017,-44.131266,1.585)); +#253483 = LINE('',#253484,#253485); +#253484 = CARTESIAN_POINT('',(174.971676,-44.208253,1.585)); +#253485 = VECTOR('',#253486,1.); +#253486 = DIRECTION('',(0.447218242641,0.894424867414,0.)); +#253487 = ORIENTED_EDGE('',*,*,#253488,.T.); +#253488 = EDGE_CURVE('',#253481,#253489,#253491,.T.); +#253489 = VERTEX_POINT('',#253490); +#253490 = CARTESIAN_POINT('',(175.01017,-43.564571,1.585)); +#253491 = CIRCLE('',#253492,0.815433004022); +#253492 = AXIS2_PLACEMENT_3D('',#253493,#253494,#253495); +#253493 = CARTESIAN_POINT('',(174.24554906235,-43.8479185,1.585)); +#253494 = DIRECTION('',(0.,-0.,1.)); +#253495 = DIRECTION('',(0.937687012763,-0.347481029836,-0.)); +#253496 = ORIENTED_EDGE('',*,*,#253497,.T.); +#253497 = EDGE_CURVE('',#253489,#253498,#253500,.T.); +#253498 = VERTEX_POINT('',#253499); +#253499 = CARTESIAN_POINT('',(174.971677,-43.487584,1.585)); +#253500 = LINE('',#253501,#253502); +#253501 = CARTESIAN_POINT('',(175.01017,-43.564571,1.585)); +#253502 = VECTOR('',#253503,1.); +#253503 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#253504 = ORIENTED_EDGE('',*,*,#253505,.T.); +#253505 = EDGE_CURVE('',#253498,#253412,#253506,.T.); +#253506 = LINE('',#253507,#253508); +#253507 = CARTESIAN_POINT('',(174.971677,-43.487584,1.585)); +#253508 = VECTOR('',#253509,1.); +#253509 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#253510 = PLANE('',#253511); +#253511 = AXIS2_PLACEMENT_3D('',#253512,#253513,#253514); +#253512 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253513 = DIRECTION('',(0.,0.,1.)); +#253514 = DIRECTION('',(1.,0.,-0.)); +#253515 = SHELL_BASED_SURFACE_MODEL('',(#253516)); +#253516 = OPEN_SHELL('',(#253517)); +#253517 = ADVANCED_FACE('',(#253518),#253652,.T.); +#253518 = FACE_BOUND('',#253519,.F.); +#253519 = EDGE_LOOP('',(#253520,#253530,#253538,#253547,#253555,#253563, + #253572,#253580,#253589,#253597,#253605,#253613,#253621,#253630, + #253638,#253646)); +#253520 = ORIENTED_EDGE('',*,*,#253521,.T.); +#253521 = EDGE_CURVE('',#253522,#253524,#253526,.T.); +#253522 = VERTEX_POINT('',#253523); +#253523 = CARTESIAN_POINT('',(147.567133,-43.074941,1.585)); +#253524 = VERTEX_POINT('',#253525); +#253525 = CARTESIAN_POINT('',(147.605589,-43.05436,1.585)); +#253526 = LINE('',#253527,#253528); +#253527 = CARTESIAN_POINT('',(147.567133,-43.074941,1.585)); +#253528 = VECTOR('',#253529,1.); +#253529 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#253530 = ORIENTED_EDGE('',*,*,#253531,.T.); +#253531 = EDGE_CURVE('',#253524,#253532,#253534,.T.); +#253532 = VERTEX_POINT('',#253533); +#253533 = CARTESIAN_POINT('',(147.627426,-43.05436,1.585)); +#253534 = LINE('',#253535,#253536); +#253535 = CARTESIAN_POINT('',(147.605589,-43.05436,1.585)); +#253536 = VECTOR('',#253537,1.); +#253537 = DIRECTION('',(1.,0.,0.)); +#253538 = ORIENTED_EDGE('',*,*,#253539,.T.); +#253539 = EDGE_CURVE('',#253532,#253540,#253542,.T.); +#253540 = VERTEX_POINT('',#253541); +#253541 = CARTESIAN_POINT('',(147.695221,-43.127919,1.585)); +#253542 = CIRCLE('',#253543,7.21689809423E-02); +#253543 = AXIS2_PLACEMENT_3D('',#253544,#253545,#253546); +#253544 = CARTESIAN_POINT('',(147.62306806389,-43.12639728342,1.585)); +#253545 = DIRECTION('',(0.,0.,-1.)); +#253546 = DIRECTION('',(6.038516895303E-02,0.998175150648,0.)); +#253547 = ORIENTED_EDGE('',*,*,#253548,.T.); +#253548 = EDGE_CURVE('',#253540,#253549,#253551,.T.); +#253549 = VERTEX_POINT('',#253550); +#253550 = CARTESIAN_POINT('',(147.695221,-44.052919,1.585)); +#253551 = LINE('',#253552,#253553); +#253552 = CARTESIAN_POINT('',(147.695221,-43.127919,1.585)); +#253553 = VECTOR('',#253554,1.); +#253554 = DIRECTION('',(0.,-1.,0.)); +#253555 = ORIENTED_EDGE('',*,*,#253556,.T.); +#253556 = EDGE_CURVE('',#253549,#253557,#253559,.T.); +#253557 = VERTEX_POINT('',#253558); +#253558 = CARTESIAN_POINT('',(147.920567,-44.05436,1.585)); +#253559 = LINE('',#253560,#253561); +#253560 = CARTESIAN_POINT('',(147.695221,-44.052919,1.585)); +#253561 = VECTOR('',#253562,1.); +#253562 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#253563 = ORIENTED_EDGE('',*,*,#253564,.T.); +#253564 = EDGE_CURVE('',#253557,#253565,#253567,.T.); +#253565 = VERTEX_POINT('',#253566); +#253566 = CARTESIAN_POINT('',(147.905935,-44.202919,1.585)); +#253567 = CIRCLE('',#253568,7.500006711464E-02); +#253568 = AXIS2_PLACEMENT_3D('',#253569,#253570,#253571); +#253569 = CARTESIAN_POINT('',(147.90593506711,-44.12791893288,1.585)); +#253570 = DIRECTION('',(0.,0.,-1.)); +#253571 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#253572 = ORIENTED_EDGE('',*,*,#253573,.T.); +#253573 = EDGE_CURVE('',#253565,#253574,#253576,.T.); +#253574 = VERTEX_POINT('',#253575); +#253575 = CARTESIAN_POINT('',(147.319875,-44.201478,1.585)); +#253576 = LINE('',#253577,#253578); +#253577 = CARTESIAN_POINT('',(147.905935,-44.202919,1.585)); +#253578 = VECTOR('',#253579,1.); +#253579 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#253580 = ORIENTED_EDGE('',*,*,#253581,.T.); +#253581 = EDGE_CURVE('',#253574,#253582,#253584,.T.); +#253582 = VERTEX_POINT('',#253583); +#253583 = CARTESIAN_POINT('',(147.334507,-44.052919,1.585)); +#253584 = CIRCLE('',#253585,7.500006711464E-02); +#253585 = AXIS2_PLACEMENT_3D('',#253586,#253587,#253588); +#253586 = CARTESIAN_POINT('',(147.33450693288,-44.12791906711,1.585)); +#253587 = DIRECTION('',(0.,0.,-1.)); +#253588 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#253589 = ORIENTED_EDGE('',*,*,#253590,.T.); +#253590 = EDGE_CURVE('',#253582,#253591,#253593,.T.); +#253591 = VERTEX_POINT('',#253592); +#253592 = CARTESIAN_POINT('',(147.545221,-44.052919,1.585)); +#253593 = LINE('',#253594,#253595); +#253594 = CARTESIAN_POINT('',(147.334507,-44.052919,1.585)); +#253595 = VECTOR('',#253596,1.); +#253596 = DIRECTION('',(1.,0.,0.)); +#253597 = ORIENTED_EDGE('',*,*,#253598,.T.); +#253598 = EDGE_CURVE('',#253591,#253599,#253601,.T.); +#253599 = VERTEX_POINT('',#253600); +#253600 = CARTESIAN_POINT('',(147.545221,-43.356604,1.585)); +#253601 = LINE('',#253602,#253603); +#253602 = CARTESIAN_POINT('',(147.545221,-44.052919,1.585)); +#253603 = VECTOR('',#253604,1.); +#253604 = DIRECTION('',(0.,1.,0.)); +#253605 = ORIENTED_EDGE('',*,*,#253606,.T.); +#253606 = EDGE_CURVE('',#253599,#253607,#253609,.T.); +#253607 = VERTEX_POINT('',#253608); +#253608 = CARTESIAN_POINT('',(147.469585,-43.429131,1.585)); +#253609 = LINE('',#253610,#253611); +#253610 = CARTESIAN_POINT('',(147.545221,-43.356604,1.585)); +#253611 = VECTOR('',#253612,1.); +#253612 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#253613 = ORIENTED_EDGE('',*,*,#253614,.T.); +#253614 = EDGE_CURVE('',#253607,#253615,#253617,.T.); +#253615 = VERTEX_POINT('',#253616); +#253616 = CARTESIAN_POINT('',(147.354316,-43.48597,1.585)); +#253617 = LINE('',#253618,#253619); +#253618 = CARTESIAN_POINT('',(147.469585,-43.429131,1.585)); +#253619 = VECTOR('',#253620,1.); +#253620 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#253621 = ORIENTED_EDGE('',*,*,#253622,.T.); +#253622 = EDGE_CURVE('',#253615,#253623,#253625,.T.); +#253623 = VERTEX_POINT('',#253624); +#253624 = CARTESIAN_POINT('',(147.300966,-43.346551,1.585)); +#253625 = CIRCLE('',#253626,7.500005272363E-02); +#253626 = AXIS2_PLACEMENT_3D('',#253627,#253628,#253629); +#253627 = CARTESIAN_POINT('',(147.33450655676,-43.41363332972,1.585)); +#253628 = DIRECTION('',(0.,0.,-1.)); +#253629 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#253630 = ORIENTED_EDGE('',*,*,#253631,.T.); +#253631 = EDGE_CURVE('',#253623,#253632,#253634,.T.); +#253632 = VERTEX_POINT('',#253633); +#253633 = CARTESIAN_POINT('',(147.385318,-43.304375,1.585)); +#253634 = LINE('',#253635,#253636); +#253635 = CARTESIAN_POINT('',(147.300966,-43.346551,1.585)); +#253636 = VECTOR('',#253637,1.); +#253637 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#253638 = ORIENTED_EDGE('',*,*,#253639,.T.); +#253639 = EDGE_CURVE('',#253632,#253640,#253642,.T.); +#253640 = VERTEX_POINT('',#253641); +#253641 = CARTESIAN_POINT('',(147.466697,-43.222996,1.585)); +#253642 = LINE('',#253643,#253644); +#253643 = CARTESIAN_POINT('',(147.385318,-43.304375,1.585)); +#253644 = VECTOR('',#253645,1.); +#253645 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#253646 = ORIENTED_EDGE('',*,*,#253647,.T.); +#253647 = EDGE_CURVE('',#253640,#253522,#253648,.T.); +#253648 = LINE('',#253649,#253650); +#253649 = CARTESIAN_POINT('',(147.466697,-43.222996,1.585)); +#253650 = VECTOR('',#253651,1.); +#253651 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#253652 = PLANE('',#253653); +#253653 = AXIS2_PLACEMENT_3D('',#253654,#253655,#253656); +#253654 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253655 = DIRECTION('',(0.,0.,1.)); +#253656 = DIRECTION('',(1.,0.,-0.)); +#253657 = SHELL_BASED_SURFACE_MODEL('',(#253658)); +#253658 = OPEN_SHELL('',(#253659)); +#253659 = ADVANCED_FACE('',(#253660),#253754,.T.); +#253660 = FACE_BOUND('',#253661,.F.); +#253661 = EDGE_LOOP('',(#253662,#253673,#253681,#253690,#253698,#253706, + #253714,#253723,#253731,#253739,#253748)); +#253662 = ORIENTED_EDGE('',*,*,#253663,.T.); +#253663 = EDGE_CURVE('',#253664,#253666,#253668,.T.); +#253664 = VERTEX_POINT('',#253665); +#253665 = CARTESIAN_POINT('',(146.451424,-43.113287,1.585)); +#253666 = VERTEX_POINT('',#253667); +#253667 = CARTESIAN_POINT('',(146.524983,-43.052919,1.585)); +#253668 = CIRCLE('',#253669,7.500074938988E-02); +#253669 = AXIS2_PLACEMENT_3D('',#253670,#253671,#253672); +#253670 = CARTESIAN_POINT('',(146.52498346611,-43.12791974938,1.585)); +#253671 = DIRECTION('',(0.,0.,-1.)); +#253672 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#253673 = ORIENTED_EDGE('',*,*,#253674,.T.); +#253674 = EDGE_CURVE('',#253666,#253675,#253677,.T.); +#253675 = VERTEX_POINT('',#253676); +#253676 = CARTESIAN_POINT('',(147.015805,-43.05436,1.585)); +#253677 = LINE('',#253678,#253679); +#253678 = CARTESIAN_POINT('',(146.524983,-43.052919,1.585)); +#253679 = VECTOR('',#253680,1.); +#253680 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#253681 = ORIENTED_EDGE('',*,*,#253682,.T.); +#253682 = EDGE_CURVE('',#253675,#253683,#253685,.T.); +#253683 = VERTEX_POINT('',#253684); +#253684 = CARTESIAN_POINT('',(147.001173,-43.202919,1.585)); +#253685 = CIRCLE('',#253686,7.500006711463E-02); +#253686 = AXIS2_PLACEMENT_3D('',#253687,#253688,#253689); +#253687 = CARTESIAN_POINT('',(147.00117306711,-43.12791893288,1.585)); +#253688 = DIRECTION('',(0.,0.,-1.)); +#253689 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#253690 = ORIENTED_EDGE('',*,*,#253691,.T.); +#253691 = EDGE_CURVE('',#253683,#253692,#253694,.T.); +#253692 = VERTEX_POINT('',#253693); +#253693 = CARTESIAN_POINT('',(146.599983,-43.202919,1.585)); +#253694 = LINE('',#253695,#253696); +#253695 = CARTESIAN_POINT('',(147.001173,-43.202919,1.585)); +#253696 = VECTOR('',#253697,1.); +#253697 = DIRECTION('',(-1.,0.,0.)); +#253698 = ORIENTED_EDGE('',*,*,#253699,.T.); +#253699 = EDGE_CURVE('',#253692,#253700,#253702,.T.); +#253700 = VERTEX_POINT('',#253701); +#253701 = CARTESIAN_POINT('',(146.599983,-43.529109,1.585)); +#253702 = LINE('',#253703,#253704); +#253703 = CARTESIAN_POINT('',(146.599983,-43.202919,1.585)); +#253704 = VECTOR('',#253705,1.); +#253705 = DIRECTION('',(0.,-1.,0.)); +#253706 = ORIENTED_EDGE('',*,*,#253707,.T.); +#253707 = EDGE_CURVE('',#253700,#253708,#253710,.T.); +#253708 = VERTEX_POINT('',#253709); +#253709 = CARTESIAN_POINT('',(146.872948,-43.53055,1.585)); +#253710 = LINE('',#253711,#253712); +#253711 = CARTESIAN_POINT('',(146.599983,-43.529109,1.585)); +#253712 = VECTOR('',#253713,1.); +#253713 = DIRECTION('',(0.999986066027,-5.278991523254E-03,0.)); +#253714 = ORIENTED_EDGE('',*,*,#253715,.T.); +#253715 = EDGE_CURVE('',#253708,#253716,#253718,.T.); +#253716 = VERTEX_POINT('',#253717); +#253717 = CARTESIAN_POINT('',(146.858316,-43.679109,1.585)); +#253718 = CIRCLE('',#253719,7.500006711464E-02); +#253719 = AXIS2_PLACEMENT_3D('',#253720,#253721,#253722); +#253720 = CARTESIAN_POINT('',(146.85831606711,-43.60410893288,1.585)); +#253721 = DIRECTION('',(0.,0.,-1.)); +#253722 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#253723 = ORIENTED_EDGE('',*,*,#253724,.T.); +#253724 = EDGE_CURVE('',#253716,#253725,#253727,.T.); +#253725 = VERTEX_POINT('',#253726); +#253726 = CARTESIAN_POINT('',(146.599983,-43.679109,1.585)); +#253727 = LINE('',#253728,#253729); +#253728 = CARTESIAN_POINT('',(146.858316,-43.679109,1.585)); +#253729 = VECTOR('',#253730,1.); +#253730 = DIRECTION('',(-1.,0.,0.)); +#253731 = ORIENTED_EDGE('',*,*,#253732,.T.); +#253732 = EDGE_CURVE('',#253725,#253733,#253735,.T.); +#253733 = VERTEX_POINT('',#253734); +#253734 = CARTESIAN_POINT('',(146.598542,-44.142551,1.585)); +#253735 = LINE('',#253736,#253737); +#253736 = CARTESIAN_POINT('',(146.599983,-43.679109,1.585)); +#253737 = VECTOR('',#253738,1.); +#253738 = DIRECTION('',(-3.109327670448E-03,-0.999995166029,0.)); +#253739 = ORIENTED_EDGE('',*,*,#253740,.T.); +#253740 = EDGE_CURVE('',#253733,#253741,#253743,.T.); +#253741 = VERTEX_POINT('',#253742); +#253742 = CARTESIAN_POINT('',(146.449983,-44.127919,1.585)); +#253743 = CIRCLE('',#253744,7.500006711464E-02); +#253744 = AXIS2_PLACEMENT_3D('',#253745,#253746,#253747); +#253745 = CARTESIAN_POINT('',(146.52498306711,-44.12791906711,1.585)); +#253746 = DIRECTION('',(-0.,0.,-1.)); +#253747 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#253748 = ORIENTED_EDGE('',*,*,#253749,.T.); +#253749 = EDGE_CURVE('',#253741,#253664,#253750,.T.); +#253750 = LINE('',#253751,#253752); +#253751 = CARTESIAN_POINT('',(146.449983,-44.127919,1.585)); +#253752 = VECTOR('',#253753,1.); +#253753 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#253754 = PLANE('',#253755); +#253755 = AXIS2_PLACEMENT_3D('',#253756,#253757,#253758); +#253756 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253757 = DIRECTION('',(0.,0.,1.)); +#253758 = DIRECTION('',(1.,0.,-0.)); +#253759 = SHELL_BASED_SURFACE_MODEL('',(#253760)); +#253760 = OPEN_SHELL('',(#253761)); +#253761 = ADVANCED_FACE('',(#253762),#253956,.T.); +#253762 = FACE_BOUND('',#253763,.F.); +#253763 = EDGE_LOOP('',(#253764,#253775,#253783,#253792,#253800,#253809, + #253817,#253825,#253833,#253842,#253850,#253859,#253867,#253876, + #253884,#253892,#253900,#253909,#253917,#253925,#253934,#253942, + #253950)); +#253764 = ORIENTED_EDGE('',*,*,#253765,.T.); +#253765 = EDGE_CURVE('',#253766,#253768,#253770,.T.); +#253766 = VERTEX_POINT('',#253767); +#253767 = CARTESIAN_POINT('',(156.513151,-43.101925,1.585)); +#253768 = VERTEX_POINT('',#253769); +#253769 = CARTESIAN_POINT('',(156.604207,-43.107842,1.585)); +#253770 = CIRCLE('',#253771,7.499904172406E-02); +#253771 = AXIS2_PLACEMENT_3D('',#253772,#253773,#253774); +#253772 = CARTESIAN_POINT('',(156.55481904495,-43.16428388299,1.585)); +#253773 = DIRECTION('',(0.,0.,-1.)); +#253774 = DIRECTION('',(-0.555581031454,0.831462396918,0.)); +#253775 = ORIENTED_EDGE('',*,*,#253776,.T.); +#253776 = EDGE_CURVE('',#253768,#253777,#253779,.T.); +#253777 = VERTEX_POINT('',#253778); +#253778 = CARTESIAN_POINT('',(156.863516,-43.334737,1.585)); +#253779 = LINE('',#253780,#253781); +#253780 = CARTESIAN_POINT('',(156.604207,-43.107842,1.585)); +#253781 = VECTOR('',#253782,1.); +#253782 = DIRECTION('',(0.752577234061,-0.658503991463,0.)); +#253783 = ORIENTED_EDGE('',*,*,#253784,.T.); +#253784 = EDGE_CURVE('',#253777,#253785,#253787,.T.); +#253785 = VERTEX_POINT('',#253786); +#253786 = CARTESIAN_POINT('',(157.111615,-43.090726,1.585)); +#253787 = CIRCLE('',#253788,0.348517853143); +#253788 = AXIS2_PLACEMENT_3D('',#253789,#253790,#253791); +#253789 = CARTESIAN_POINT('',(157.19931548686,-43.42802900704,1.585)); +#253790 = DIRECTION('',(0.,0.,-1.)); +#253791 = DIRECTION('',(-0.963507274705,0.267682146568,0.)); +#253792 = ORIENTED_EDGE('',*,*,#253793,.T.); +#253793 = EDGE_CURVE('',#253785,#253794,#253796,.T.); +#253794 = VERTEX_POINT('',#253795); +#253795 = CARTESIAN_POINT('',(157.378974,-43.090726,1.585)); +#253796 = LINE('',#253797,#253798); +#253797 = CARTESIAN_POINT('',(157.111615,-43.090726,1.585)); +#253798 = VECTOR('',#253799,1.); +#253799 = DIRECTION('',(1.,0.,0.)); +#253800 = ORIENTED_EDGE('',*,*,#253801,.T.); +#253801 = EDGE_CURVE('',#253794,#253802,#253804,.T.); +#253802 = VERTEX_POINT('',#253803); +#253803 = CARTESIAN_POINT('',(157.628378,-43.340129,1.585)); +#253804 = CIRCLE('',#253805,0.347873191155); +#253805 = AXIS2_PLACEMENT_3D('',#253806,#253807,#253808); +#253806 = CARTESIAN_POINT('',(157.29164493659,-43.42745941356,1.585)); +#253807 = DIRECTION('',(0.,0.,-1.)); +#253808 = DIRECTION('',(0.251037060709,0.967977476055,0.)); +#253809 = ORIENTED_EDGE('',*,*,#253810,.T.); +#253810 = EDGE_CURVE('',#253802,#253811,#253813,.T.); +#253811 = VERTEX_POINT('',#253812); +#253812 = CARTESIAN_POINT('',(157.627156,-43.660285,1.585)); +#253813 = LINE('',#253814,#253815); +#253814 = CARTESIAN_POINT('',(157.628378,-43.340129,1.585)); +#253815 = VECTOR('',#253816,1.); +#253816 = DIRECTION('',(-3.816861463287E-03,-0.999992715758,0.)); +#253817 = ORIENTED_EDGE('',*,*,#253818,.T.); +#253818 = EDGE_CURVE('',#253811,#253819,#253821,.T.); +#253819 = VERTEX_POINT('',#253820); +#253820 = CARTESIAN_POINT('',(157.56495,-43.782997,1.585)); +#253821 = LINE('',#253822,#253823); +#253822 = CARTESIAN_POINT('',(157.627156,-43.660285,1.585)); +#253823 = VECTOR('',#253824,1.); +#253824 = DIRECTION('',(-0.452149402815,-0.891942216477,0.)); +#253825 = ORIENTED_EDGE('',*,*,#253826,.T.); +#253826 = EDGE_CURVE('',#253819,#253827,#253829,.T.); +#253827 = VERTEX_POINT('',#253828); +#253828 = CARTESIAN_POINT('',(157.501247,-43.845693,1.585)); +#253829 = LINE('',#253830,#253831); +#253830 = CARTESIAN_POINT('',(157.56495,-43.782997,1.585)); +#253831 = VECTOR('',#253832,1.); +#253832 = DIRECTION('',(-0.712717566469,-0.701451117645,0.)); +#253833 = ORIENTED_EDGE('',*,*,#253834,.T.); +#253834 = EDGE_CURVE('',#253827,#253835,#253837,.T.); +#253835 = VERTEX_POINT('',#253836); +#253836 = CARTESIAN_POINT('',(157.406548,-43.730298,1.585)); +#253837 = CIRCLE('',#253838,7.500012668041E-02); +#253838 = AXIS2_PLACEMENT_3D('',#253839,#253840,#253841); +#253839 = CARTESIAN_POINT('',(157.45958024831,-43.783331948,1.585)); +#253840 = DIRECTION('',(0.,0.,-1.)); +#253841 = DIRECTION('',(0.555555750804,-0.831479288827,0.)); +#253842 = ORIENTED_EDGE('',*,*,#253843,.T.); +#253843 = EDGE_CURVE('',#253835,#253844,#253846,.T.); +#253844 = VERTEX_POINT('',#253845); +#253845 = CARTESIAN_POINT('',(157.445561,-43.691285,1.585)); +#253846 = LINE('',#253847,#253848); +#253847 = CARTESIAN_POINT('',(157.406548,-43.730298,1.585)); +#253848 = VECTOR('',#253849,1.); +#253849 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#253850 = ORIENTED_EDGE('',*,*,#253851,.T.); +#253851 = EDGE_CURVE('',#253844,#253852,#253854,.T.); +#253852 = VERTEX_POINT('',#253853); +#253853 = CARTESIAN_POINT('',(157.445561,-43.30395,1.585)); +#253854 = CIRCLE('',#253855,0.358499305982); +#253855 = AXIS2_PLACEMENT_3D('',#253856,#253857,#253858); +#253856 = CARTESIAN_POINT('',(157.14387465322,-43.4976175,1.585)); +#253857 = DIRECTION('',(0.,-0.,1.)); +#253858 = DIRECTION('',(0.841525608965,-0.540217224324,-0.)); +#253859 = ORIENTED_EDGE('',*,*,#253860,.T.); +#253860 = EDGE_CURVE('',#253852,#253861,#253863,.T.); +#253861 = VERTEX_POINT('',#253862); +#253862 = CARTESIAN_POINT('',(157.415153,-43.273543,1.585)); +#253863 = LINE('',#253864,#253865); +#253864 = CARTESIAN_POINT('',(157.445561,-43.30395,1.585)); +#253865 = VECTOR('',#253866,1.); +#253866 = DIRECTION('',(-0.707118408268,0.707095153914,0.)); +#253867 = ORIENTED_EDGE('',*,*,#253868,.T.); +#253868 = EDGE_CURVE('',#253861,#253869,#253871,.T.); +#253869 = VERTEX_POINT('',#253870); +#253870 = CARTESIAN_POINT('',(157.075436,-43.273543,1.585)); +#253871 = CIRCLE('',#253872,0.305621483548); +#253872 = AXIS2_PLACEMENT_3D('',#253873,#253874,#253875); +#253873 = CARTESIAN_POINT('',(157.2452945,-43.527615,1.585)); +#253874 = DIRECTION('',(0.,0.,1.)); +#253875 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#253876 = ORIENTED_EDGE('',*,*,#253877,.T.); +#253877 = EDGE_CURVE('',#253869,#253878,#253880,.T.); +#253878 = VERTEX_POINT('',#253879); +#253879 = CARTESIAN_POINT('',(157.045029,-43.30395,1.585)); +#253880 = LINE('',#253881,#253882); +#253881 = CARTESIAN_POINT('',(157.075436,-43.273543,1.585)); +#253882 = VECTOR('',#253883,1.); +#253883 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#253884 = ORIENTED_EDGE('',*,*,#253885,.T.); +#253885 = EDGE_CURVE('',#253878,#253886,#253888,.T.); +#253886 = VERTEX_POINT('',#253887); +#253887 = CARTESIAN_POINT('',(157.010771,-43.372466,1.585)); +#253888 = LINE('',#253889,#253890); +#253889 = CARTESIAN_POINT('',(157.045029,-43.30395,1.585)); +#253890 = VECTOR('',#253891,1.); +#253891 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#253892 = ORIENTED_EDGE('',*,*,#253893,.T.); +#253893 = EDGE_CURVE('',#253886,#253894,#253896,.T.); +#253894 = VERTEX_POINT('',#253895); +#253895 = CARTESIAN_POINT('',(157.00933,-43.51225,1.585)); +#253896 = LINE('',#253897,#253898); +#253897 = CARTESIAN_POINT('',(157.010771,-43.372466,1.585)); +#253898 = VECTOR('',#253899,1.); +#253899 = DIRECTION('',(-1.030821437469E-02,-0.999946868947,0.)); +#253900 = ORIENTED_EDGE('',*,*,#253901,.T.); +#253901 = EDGE_CURVE('',#253894,#253902,#253904,.T.); +#253902 = VERTEX_POINT('',#253903); +#253903 = CARTESIAN_POINT('',(156.886383,-43.554061,1.585)); +#253904 = CIRCLE('',#253905,7.500015628754E-02); +#253905 = AXIS2_PLACEMENT_3D('',#253906,#253907,#253908); +#253906 = CARTESIAN_POINT('',(156.9357710461,-43.49761771567,1.585)); +#253907 = DIRECTION('',(-0.,0.,-1.)); +#253908 = DIRECTION('',(0.980784008184,-0.195096717785,-0.)); +#253909 = ORIENTED_EDGE('',*,*,#253910,.T.); +#253910 = EDGE_CURVE('',#253902,#253911,#253913,.T.); +#253911 = VERTEX_POINT('',#253912); +#253912 = CARTESIAN_POINT('',(156.629819,-43.329567,1.585)); +#253913 = LINE('',#253914,#253915); +#253914 = CARTESIAN_POINT('',(156.886383,-43.554061,1.585)); +#253915 = VECTOR('',#253916,1.); +#253916 = DIRECTION('',(-0.752575967874,0.658505438534,0.)); +#253917 = ORIENTED_EDGE('',*,*,#253918,.T.); +#253918 = EDGE_CURVE('',#253911,#253919,#253921,.T.); +#253919 = VERTEX_POINT('',#253920); +#253920 = CARTESIAN_POINT('',(156.628378,-43.797964,1.585)); +#253921 = LINE('',#253922,#253923); +#253922 = CARTESIAN_POINT('',(156.629819,-43.329567,1.585)); +#253923 = VECTOR('',#253924,1.); +#253924 = DIRECTION('',(-3.076435546862E-03,-0.999995267761,0.)); +#253925 = ORIENTED_EDGE('',*,*,#253926,.T.); +#253926 = EDGE_CURVE('',#253919,#253927,#253929,.T.); +#253927 = VERTEX_POINT('',#253928); +#253928 = CARTESIAN_POINT('',(156.479819,-43.783332,1.585)); +#253929 = CIRCLE('',#253930,7.500006711464E-02); +#253930 = AXIS2_PLACEMENT_3D('',#253931,#253932,#253933); +#253931 = CARTESIAN_POINT('',(156.55481906711,-43.78333206711,1.585)); +#253932 = DIRECTION('',(-0.,0.,-1.)); +#253933 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#253934 = ORIENTED_EDGE('',*,*,#253935,.T.); +#253935 = EDGE_CURVE('',#253927,#253936,#253938,.T.); +#253936 = VERTEX_POINT('',#253937); +#253937 = CARTESIAN_POINT('',(156.48126,-43.149653,1.585)); +#253938 = LINE('',#253939,#253940); +#253939 = CARTESIAN_POINT('',(156.479819,-43.783332,1.585)); +#253940 = VECTOR('',#253941,1.); +#253941 = DIRECTION('',(2.274016140951E-03,0.999997414422,0.)); +#253942 = ORIENTED_EDGE('',*,*,#253943,.T.); +#253943 = EDGE_CURVE('',#253936,#253944,#253946,.T.); +#253944 = VERTEX_POINT('',#253945); +#253945 = CARTESIAN_POINT('',(156.492459,-43.122617,1.585)); +#253946 = LINE('',#253947,#253948); +#253947 = CARTESIAN_POINT('',(156.48126,-43.149653,1.585)); +#253948 = VECTOR('',#253949,1.); +#253949 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#253950 = ORIENTED_EDGE('',*,*,#253951,.T.); +#253951 = EDGE_CURVE('',#253944,#253766,#253952,.T.); +#253952 = LINE('',#253953,#253954); +#253953 = CARTESIAN_POINT('',(156.492459,-43.122617,1.585)); +#253954 = VECTOR('',#253955,1.); +#253955 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#253956 = PLANE('',#253957); +#253957 = AXIS2_PLACEMENT_3D('',#253958,#253959,#253960); +#253958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#253959 = DIRECTION('',(0.,0.,1.)); +#253960 = DIRECTION('',(1.,0.,-0.)); +#253961 = SHELL_BASED_SURFACE_MODEL('',(#253962)); +#253962 = OPEN_SHELL('',(#253963)); +#253963 = ADVANCED_FACE('',(#253964),#254098,.T.); +#253964 = FACE_BOUND('',#253965,.F.); +#253965 = EDGE_LOOP('',(#253966,#253976,#253984,#253993,#254001,#254009, + #254018,#254026,#254035,#254043,#254051,#254059,#254067,#254076, + #254084,#254092)); +#253966 = ORIENTED_EDGE('',*,*,#253967,.T.); +#253967 = EDGE_CURVE('',#253968,#253970,#253972,.T.); +#253968 = VERTEX_POINT('',#253969); +#253969 = CARTESIAN_POINT('',(118.662371,-42.174941,1.585)); +#253970 = VERTEX_POINT('',#253971); +#253971 = CARTESIAN_POINT('',(118.700827,-42.15436,1.585)); +#253972 = LINE('',#253973,#253974); +#253973 = CARTESIAN_POINT('',(118.662371,-42.174941,1.585)); +#253974 = VECTOR('',#253975,1.); +#253975 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#253976 = ORIENTED_EDGE('',*,*,#253977,.T.); +#253977 = EDGE_CURVE('',#253970,#253978,#253980,.T.); +#253978 = VERTEX_POINT('',#253979); +#253979 = CARTESIAN_POINT('',(118.722664,-42.15436,1.585)); +#253980 = LINE('',#253981,#253982); +#253981 = CARTESIAN_POINT('',(118.700827,-42.15436,1.585)); +#253982 = VECTOR('',#253983,1.); +#253983 = DIRECTION('',(1.,0.,0.)); +#253984 = ORIENTED_EDGE('',*,*,#253985,.T.); +#253985 = EDGE_CURVE('',#253978,#253986,#253988,.T.); +#253986 = VERTEX_POINT('',#253987); +#253987 = CARTESIAN_POINT('',(118.790459,-42.227919,1.585)); +#253988 = CIRCLE('',#253989,7.216898094229E-02); +#253989 = AXIS2_PLACEMENT_3D('',#253990,#253991,#253992); +#253990 = CARTESIAN_POINT('',(118.71830606389,-42.22639728342,1.585)); +#253991 = DIRECTION('',(0.,0.,-1.)); +#253992 = DIRECTION('',(6.038516895284E-02,0.998175150648,0.)); +#253993 = ORIENTED_EDGE('',*,*,#253994,.T.); +#253994 = EDGE_CURVE('',#253986,#253995,#253997,.T.); +#253995 = VERTEX_POINT('',#253996); +#253996 = CARTESIAN_POINT('',(118.790459,-43.152919,1.585)); +#253997 = LINE('',#253998,#253999); +#253998 = CARTESIAN_POINT('',(118.790459,-42.227919,1.585)); +#253999 = VECTOR('',#254000,1.); +#254000 = DIRECTION('',(0.,-1.,0.)); +#254001 = ORIENTED_EDGE('',*,*,#254002,.T.); +#254002 = EDGE_CURVE('',#253995,#254003,#254005,.T.); +#254003 = VERTEX_POINT('',#254004); +#254004 = CARTESIAN_POINT('',(119.015805,-43.15436,1.585)); +#254005 = LINE('',#254006,#254007); +#254006 = CARTESIAN_POINT('',(118.790459,-43.152919,1.585)); +#254007 = VECTOR('',#254008,1.); +#254008 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#254009 = ORIENTED_EDGE('',*,*,#254010,.T.); +#254010 = EDGE_CURVE('',#254003,#254011,#254013,.T.); +#254011 = VERTEX_POINT('',#254012); +#254012 = CARTESIAN_POINT('',(119.001173,-43.302919,1.585)); +#254013 = CIRCLE('',#254014,7.500006711465E-02); +#254014 = AXIS2_PLACEMENT_3D('',#254015,#254016,#254017); +#254015 = CARTESIAN_POINT('',(119.00117306711,-43.22791893288,1.585)); +#254016 = DIRECTION('',(0.,0.,-1.)); +#254017 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254018 = ORIENTED_EDGE('',*,*,#254019,.T.); +#254019 = EDGE_CURVE('',#254011,#254020,#254022,.T.); +#254020 = VERTEX_POINT('',#254021); +#254021 = CARTESIAN_POINT('',(118.415113,-43.301478,1.585)); +#254022 = LINE('',#254023,#254024); +#254023 = CARTESIAN_POINT('',(119.001173,-43.302919,1.585)); +#254024 = VECTOR('',#254025,1.); +#254025 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#254026 = ORIENTED_EDGE('',*,*,#254027,.T.); +#254027 = EDGE_CURVE('',#254020,#254028,#254030,.T.); +#254028 = VERTEX_POINT('',#254029); +#254029 = CARTESIAN_POINT('',(118.429745,-43.152919,1.585)); +#254030 = CIRCLE('',#254031,7.500006711464E-02); +#254031 = AXIS2_PLACEMENT_3D('',#254032,#254033,#254034); +#254032 = CARTESIAN_POINT('',(118.42974493288,-43.22791906711,1.585)); +#254033 = DIRECTION('',(0.,0.,-1.)); +#254034 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#254035 = ORIENTED_EDGE('',*,*,#254036,.T.); +#254036 = EDGE_CURVE('',#254028,#254037,#254039,.T.); +#254037 = VERTEX_POINT('',#254038); +#254038 = CARTESIAN_POINT('',(118.640459,-43.152919,1.585)); +#254039 = LINE('',#254040,#254041); +#254040 = CARTESIAN_POINT('',(118.429745,-43.152919,1.585)); +#254041 = VECTOR('',#254042,1.); +#254042 = DIRECTION('',(1.,0.,0.)); +#254043 = ORIENTED_EDGE('',*,*,#254044,.T.); +#254044 = EDGE_CURVE('',#254037,#254045,#254047,.T.); +#254045 = VERTEX_POINT('',#254046); +#254046 = CARTESIAN_POINT('',(118.640459,-42.456604,1.585)); +#254047 = LINE('',#254048,#254049); +#254048 = CARTESIAN_POINT('',(118.640459,-43.152919,1.585)); +#254049 = VECTOR('',#254050,1.); +#254050 = DIRECTION('',(0.,1.,0.)); +#254051 = ORIENTED_EDGE('',*,*,#254052,.T.); +#254052 = EDGE_CURVE('',#254045,#254053,#254055,.T.); +#254053 = VERTEX_POINT('',#254054); +#254054 = CARTESIAN_POINT('',(118.564823,-42.529131,1.585)); +#254055 = LINE('',#254056,#254057); +#254056 = CARTESIAN_POINT('',(118.640459,-42.456604,1.585)); +#254057 = VECTOR('',#254058,1.); +#254058 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#254059 = ORIENTED_EDGE('',*,*,#254060,.T.); +#254060 = EDGE_CURVE('',#254053,#254061,#254063,.T.); +#254061 = VERTEX_POINT('',#254062); +#254062 = CARTESIAN_POINT('',(118.449554,-42.58597,1.585)); +#254063 = LINE('',#254064,#254065); +#254064 = CARTESIAN_POINT('',(118.564823,-42.529131,1.585)); +#254065 = VECTOR('',#254066,1.); +#254066 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#254067 = ORIENTED_EDGE('',*,*,#254068,.T.); +#254068 = EDGE_CURVE('',#254061,#254069,#254071,.T.); +#254069 = VERTEX_POINT('',#254070); +#254070 = CARTESIAN_POINT('',(118.396204,-42.446551,1.585)); +#254071 = CIRCLE('',#254072,7.500005272362E-02); +#254072 = AXIS2_PLACEMENT_3D('',#254073,#254074,#254075); +#254073 = CARTESIAN_POINT('',(118.42974455676,-42.51363332972,1.585)); +#254074 = DIRECTION('',(0.,0.,-1.)); +#254075 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#254076 = ORIENTED_EDGE('',*,*,#254077,.T.); +#254077 = EDGE_CURVE('',#254069,#254078,#254080,.T.); +#254078 = VERTEX_POINT('',#254079); +#254079 = CARTESIAN_POINT('',(118.480556,-42.404375,1.585)); +#254080 = LINE('',#254081,#254082); +#254081 = CARTESIAN_POINT('',(118.396204,-42.446551,1.585)); +#254082 = VECTOR('',#254083,1.); +#254083 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#254084 = ORIENTED_EDGE('',*,*,#254085,.T.); +#254085 = EDGE_CURVE('',#254078,#254086,#254088,.T.); +#254086 = VERTEX_POINT('',#254087); +#254087 = CARTESIAN_POINT('',(118.561935,-42.322996,1.585)); +#254088 = LINE('',#254089,#254090); +#254089 = CARTESIAN_POINT('',(118.480556,-42.404375,1.585)); +#254090 = VECTOR('',#254091,1.); +#254091 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254092 = ORIENTED_EDGE('',*,*,#254093,.T.); +#254093 = EDGE_CURVE('',#254086,#253968,#254094,.T.); +#254094 = LINE('',#254095,#254096); +#254095 = CARTESIAN_POINT('',(118.561935,-42.322996,1.585)); +#254096 = VECTOR('',#254097,1.); +#254097 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#254098 = PLANE('',#254099); +#254099 = AXIS2_PLACEMENT_3D('',#254100,#254101,#254102); +#254100 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254101 = DIRECTION('',(0.,0.,1.)); +#254102 = DIRECTION('',(1.,0.,-0.)); +#254103 = SHELL_BASED_SURFACE_MODEL('',(#254104)); +#254104 = OPEN_SHELL('',(#254105)); +#254105 = ADVANCED_FACE('',(#254106),#254265,.T.); +#254106 = FACE_BOUND('',#254107,.F.); +#254107 = EDGE_LOOP('',(#254108,#254119,#254127,#254135,#254143,#254151, + #254159,#254167,#254176,#254184,#254193,#254201,#254209,#254217, + #254226,#254234,#254242,#254250,#254259)); +#254108 = ORIENTED_EDGE('',*,*,#254109,.T.); +#254109 = EDGE_CURVE('',#254110,#254112,#254114,.T.); +#254110 = VERTEX_POINT('',#254111); +#254111 = CARTESIAN_POINT('',(128.670014,-42.208456,1.585)); +#254112 = VERTEX_POINT('',#254113); +#254113 = CARTESIAN_POINT('',(129.179409,-42.217786,1.585)); +#254114 = CIRCLE('',#254115,0.450326844012); +#254115 = AXIS2_PLACEMENT_3D('',#254116,#254117,#254118); +#254116 = CARTESIAN_POINT('',(128.9179110301,-42.58440989199,1.585)); +#254117 = DIRECTION('',(0.,0.,-1.)); +#254118 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#254119 = ORIENTED_EDGE('',*,*,#254120,.T.); +#254120 = EDGE_CURVE('',#254112,#254121,#254123,.T.); +#254121 = VERTEX_POINT('',#254122); +#254122 = CARTESIAN_POINT('',(129.242862,-42.283316,1.585)); +#254123 = LINE('',#254124,#254125); +#254124 = CARTESIAN_POINT('',(129.179409,-42.217786,1.585)); +#254125 = VECTOR('',#254126,1.); +#254126 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#254127 = ORIENTED_EDGE('',*,*,#254128,.T.); +#254128 = EDGE_CURVE('',#254121,#254129,#254131,.T.); +#254129 = VERTEX_POINT('',#254130); +#254130 = CARTESIAN_POINT('',(129.300923,-42.403763,1.585)); +#254131 = LINE('',#254132,#254133); +#254132 = CARTESIAN_POINT('',(129.242862,-42.283316,1.585)); +#254133 = VECTOR('',#254134,1.); +#254134 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#254135 = ORIENTED_EDGE('',*,*,#254136,.T.); +#254136 = EDGE_CURVE('',#254129,#254137,#254139,.T.); +#254137 = VERTEX_POINT('',#254138); +#254138 = CARTESIAN_POINT('',(129.300164,-42.530095,1.585)); +#254139 = LINE('',#254140,#254141); +#254140 = CARTESIAN_POINT('',(129.300923,-42.403763,1.585)); +#254141 = VECTOR('',#254142,1.); +#254142 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#254143 = ORIENTED_EDGE('',*,*,#254144,.T.); +#254144 = EDGE_CURVE('',#254137,#254145,#254147,.T.); +#254145 = VERTEX_POINT('',#254146); +#254146 = CARTESIAN_POINT('',(129.242106,-42.698158,1.585)); +#254147 = LINE('',#254148,#254149); +#254148 = CARTESIAN_POINT('',(129.300164,-42.530095,1.585)); +#254149 = VECTOR('',#254150,1.); +#254150 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#254151 = ORIENTED_EDGE('',*,*,#254152,.T.); +#254152 = EDGE_CURVE('',#254145,#254153,#254155,.T.); +#254153 = VERTEX_POINT('',#254154); +#254154 = CARTESIAN_POINT('',(128.789383,-43.152919,1.585)); +#254155 = LINE('',#254156,#254157); +#254156 = CARTESIAN_POINT('',(129.242106,-42.698158,1.585)); +#254157 = VECTOR('',#254158,1.); +#254158 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#254159 = ORIENTED_EDGE('',*,*,#254160,.T.); +#254160 = EDGE_CURVE('',#254153,#254161,#254163,.T.); +#254161 = VERTEX_POINT('',#254162); +#254162 = CARTESIAN_POINT('',(129.241996,-43.15436,1.585)); +#254163 = LINE('',#254164,#254165); +#254164 = CARTESIAN_POINT('',(128.789383,-43.152919,1.585)); +#254165 = VECTOR('',#254166,1.); +#254166 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#254167 = ORIENTED_EDGE('',*,*,#254168,.T.); +#254168 = EDGE_CURVE('',#254161,#254169,#254171,.T.); +#254169 = VERTEX_POINT('',#254170); +#254170 = CARTESIAN_POINT('',(129.227364,-43.302919,1.585)); +#254171 = CIRCLE('',#254172,7.500006711465E-02); +#254172 = AXIS2_PLACEMENT_3D('',#254173,#254174,#254175); +#254173 = CARTESIAN_POINT('',(129.22736406711,-43.22791893288,1.585)); +#254174 = DIRECTION('',(0.,0.,-1.)); +#254175 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254176 = ORIENTED_EDGE('',*,*,#254177,.T.); +#254177 = EDGE_CURVE('',#254169,#254178,#254180,.T.); +#254178 = VERTEX_POINT('',#254179); +#254179 = CARTESIAN_POINT('',(128.593685,-43.301478,1.585)); +#254180 = LINE('',#254181,#254182); +#254181 = CARTESIAN_POINT('',(129.227364,-43.302919,1.585)); +#254182 = VECTOR('',#254183,1.); +#254183 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#254184 = ORIENTED_EDGE('',*,*,#254185,.T.); +#254185 = EDGE_CURVE('',#254178,#254186,#254188,.T.); +#254186 = VERTEX_POINT('',#254187); +#254187 = CARTESIAN_POINT('',(128.555284,-43.174886,1.585)); +#254188 = CIRCLE('',#254189,7.500021013109E-02); +#254189 = AXIS2_PLACEMENT_3D('',#254190,#254191,#254192); +#254190 = CARTESIAN_POINT('',(128.6083173167,-43.22791899764,1.585)); +#254191 = DIRECTION('',(0.,0.,-1.)); +#254192 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#254193 = ORIENTED_EDGE('',*,*,#254194,.T.); +#254194 = EDGE_CURVE('',#254186,#254195,#254197,.T.); +#254195 = VERTEX_POINT('',#254196); +#254196 = CARTESIAN_POINT('',(129.114192,-42.615976,1.585)); +#254197 = LINE('',#254198,#254199); +#254198 = CARTESIAN_POINT('',(128.555284,-43.174886,1.585)); +#254199 = VECTOR('',#254200,1.); +#254200 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#254201 = ORIENTED_EDGE('',*,*,#254202,.T.); +#254202 = EDGE_CURVE('',#254195,#254203,#254205,.T.); +#254203 = VERTEX_POINT('',#254204); +#254204 = CARTESIAN_POINT('',(129.152364,-42.501463,1.585)); +#254205 = LINE('',#254206,#254207); +#254206 = CARTESIAN_POINT('',(129.114192,-42.615976,1.585)); +#254207 = VECTOR('',#254208,1.); +#254208 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#254209 = ORIENTED_EDGE('',*,*,#254210,.T.); +#254210 = EDGE_CURVE('',#254203,#254211,#254213,.T.); +#254211 = VERTEX_POINT('',#254212); +#254212 = CARTESIAN_POINT('',(129.152364,-42.4361,1.585)); +#254213 = LINE('',#254214,#254215); +#254214 = CARTESIAN_POINT('',(129.152364,-42.501463,1.585)); +#254215 = VECTOR('',#254216,1.); +#254216 = DIRECTION('',(0.,1.,0.)); +#254217 = ORIENTED_EDGE('',*,*,#254218,.T.); +#254218 = EDGE_CURVE('',#254211,#254219,#254221,.T.); +#254219 = VERTEX_POINT('',#254220); +#254220 = CARTESIAN_POINT('',(129.019183,-42.302919,1.585)); +#254221 = CIRCLE('',#254222,0.18686440374); +#254222 = AXIS2_PLACEMENT_3D('',#254223,#254224,#254225); +#254223 = CARTESIAN_POINT('',(128.971647,-42.483636,1.585)); +#254224 = DIRECTION('',(0.,0.,1.)); +#254225 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#254226 = ORIENTED_EDGE('',*,*,#254227,.T.); +#254227 = EDGE_CURVE('',#254219,#254228,#254230,.T.); +#254228 = VERTEX_POINT('',#254229); +#254229 = CARTESIAN_POINT('',(128.816498,-42.302919,1.585)); +#254230 = LINE('',#254231,#254232); +#254231 = CARTESIAN_POINT('',(129.019183,-42.302919,1.585)); +#254232 = VECTOR('',#254233,1.); +#254233 = DIRECTION('',(-1.,0.,0.)); +#254234 = ORIENTED_EDGE('',*,*,#254235,.T.); +#254235 = EDGE_CURVE('',#254228,#254236,#254238,.T.); +#254236 = VERTEX_POINT('',#254237); +#254237 = CARTESIAN_POINT('',(128.747982,-42.337177,1.585)); +#254238 = LINE('',#254239,#254240); +#254239 = CARTESIAN_POINT('',(128.816498,-42.302919,1.585)); +#254240 = VECTOR('',#254241,1.); +#254241 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#254242 = ORIENTED_EDGE('',*,*,#254243,.T.); +#254243 = EDGE_CURVE('',#254236,#254244,#254246,.T.); +#254244 = VERTEX_POINT('',#254245); +#254245 = CARTESIAN_POINT('',(128.697604,-42.385517,1.585)); +#254246 = LINE('',#254247,#254248); +#254247 = CARTESIAN_POINT('',(128.747982,-42.337177,1.585)); +#254248 = VECTOR('',#254249,1.); +#254249 = DIRECTION('',(-0.721551016594,-0.69236127163,0.)); +#254250 = ORIENTED_EDGE('',*,*,#254251,.T.); +#254251 = EDGE_CURVE('',#254244,#254252,#254254,.T.); +#254252 = VERTEX_POINT('',#254253); +#254253 = CARTESIAN_POINT('',(128.602903,-42.270124,1.585)); +#254254 = CIRCLE('',#254255,7.499996838527E-02); +#254255 = AXIS2_PLACEMENT_3D('',#254256,#254257,#254258); +#254256 = CARTESIAN_POINT('',(128.655936,-42.32315697246,1.585)); +#254257 = DIRECTION('',(0.,0.,-1.)); +#254258 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#254259 = ORIENTED_EDGE('',*,*,#254260,.T.); +#254260 = EDGE_CURVE('',#254252,#254110,#254261,.T.); +#254261 = LINE('',#254262,#254263); +#254262 = CARTESIAN_POINT('',(128.602903,-42.270124,1.585)); +#254263 = VECTOR('',#254264,1.); +#254264 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#254265 = PLANE('',#254266); +#254266 = AXIS2_PLACEMENT_3D('',#254267,#254268,#254269); +#254267 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254268 = DIRECTION('',(0.,0.,1.)); +#254269 = DIRECTION('',(1.,0.,-0.)); +#254270 = SHELL_BASED_SURFACE_MODEL('',(#254271)); +#254271 = OPEN_SHELL('',(#254272)); +#254272 = ADVANCED_FACE('',(#254273),#254407,.T.); +#254273 = FACE_BOUND('',#254274,.F.); +#254274 = EDGE_LOOP('',(#254275,#254285,#254293,#254302,#254310,#254318, + #254327,#254335,#254344,#254352,#254360,#254368,#254376,#254385, + #254393,#254401)); +#254275 = ORIENTED_EDGE('',*,*,#254276,.T.); +#254276 = EDGE_CURVE('',#254277,#254279,#254281,.T.); +#254277 = VERTEX_POINT('',#254278); +#254278 = CARTESIAN_POINT('',(137.012371,-42.174941,1.585)); +#254279 = VERTEX_POINT('',#254280); +#254280 = CARTESIAN_POINT('',(137.050827,-42.15436,1.585)); +#254281 = LINE('',#254282,#254283); +#254282 = CARTESIAN_POINT('',(137.012371,-42.174941,1.585)); +#254283 = VECTOR('',#254284,1.); +#254284 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#254285 = ORIENTED_EDGE('',*,*,#254286,.T.); +#254286 = EDGE_CURVE('',#254279,#254287,#254289,.T.); +#254287 = VERTEX_POINT('',#254288); +#254288 = CARTESIAN_POINT('',(137.072664,-42.15436,1.585)); +#254289 = LINE('',#254290,#254291); +#254290 = CARTESIAN_POINT('',(137.050827,-42.15436,1.585)); +#254291 = VECTOR('',#254292,1.); +#254292 = DIRECTION('',(1.,0.,0.)); +#254293 = ORIENTED_EDGE('',*,*,#254294,.T.); +#254294 = EDGE_CURVE('',#254287,#254295,#254297,.T.); +#254295 = VERTEX_POINT('',#254296); +#254296 = CARTESIAN_POINT('',(137.140459,-42.227919,1.585)); +#254297 = CIRCLE('',#254298,7.216898094227E-02); +#254298 = AXIS2_PLACEMENT_3D('',#254299,#254300,#254301); +#254299 = CARTESIAN_POINT('',(137.06830606389,-42.22639728342,1.585)); +#254300 = DIRECTION('',(0.,0.,-1.)); +#254301 = DIRECTION('',(6.038516895266E-02,0.998175150648,0.)); +#254302 = ORIENTED_EDGE('',*,*,#254303,.T.); +#254303 = EDGE_CURVE('',#254295,#254304,#254306,.T.); +#254304 = VERTEX_POINT('',#254305); +#254305 = CARTESIAN_POINT('',(137.140459,-43.152919,1.585)); +#254306 = LINE('',#254307,#254308); +#254307 = CARTESIAN_POINT('',(137.140459,-42.227919,1.585)); +#254308 = VECTOR('',#254309,1.); +#254309 = DIRECTION('',(0.,-1.,0.)); +#254310 = ORIENTED_EDGE('',*,*,#254311,.T.); +#254311 = EDGE_CURVE('',#254304,#254312,#254314,.T.); +#254312 = VERTEX_POINT('',#254313); +#254313 = CARTESIAN_POINT('',(137.365805,-43.15436,1.585)); +#254314 = LINE('',#254315,#254316); +#254315 = CARTESIAN_POINT('',(137.140459,-43.152919,1.585)); +#254316 = VECTOR('',#254317,1.); +#254317 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#254318 = ORIENTED_EDGE('',*,*,#254319,.T.); +#254319 = EDGE_CURVE('',#254312,#254320,#254322,.T.); +#254320 = VERTEX_POINT('',#254321); +#254321 = CARTESIAN_POINT('',(137.351173,-43.302919,1.585)); +#254322 = CIRCLE('',#254323,7.500006711465E-02); +#254323 = AXIS2_PLACEMENT_3D('',#254324,#254325,#254326); +#254324 = CARTESIAN_POINT('',(137.35117306711,-43.22791893288,1.585)); +#254325 = DIRECTION('',(0.,0.,-1.)); +#254326 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254327 = ORIENTED_EDGE('',*,*,#254328,.T.); +#254328 = EDGE_CURVE('',#254320,#254329,#254331,.T.); +#254329 = VERTEX_POINT('',#254330); +#254330 = CARTESIAN_POINT('',(136.765113,-43.301478,1.585)); +#254331 = LINE('',#254332,#254333); +#254332 = CARTESIAN_POINT('',(137.351173,-43.302919,1.585)); +#254333 = VECTOR('',#254334,1.); +#254334 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#254335 = ORIENTED_EDGE('',*,*,#254336,.T.); +#254336 = EDGE_CURVE('',#254329,#254337,#254339,.T.); +#254337 = VERTEX_POINT('',#254338); +#254338 = CARTESIAN_POINT('',(136.779745,-43.152919,1.585)); +#254339 = CIRCLE('',#254340,7.500006711464E-02); +#254340 = AXIS2_PLACEMENT_3D('',#254341,#254342,#254343); +#254341 = CARTESIAN_POINT('',(136.77974493288,-43.22791906711,1.585)); +#254342 = DIRECTION('',(0.,0.,-1.)); +#254343 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#254344 = ORIENTED_EDGE('',*,*,#254345,.T.); +#254345 = EDGE_CURVE('',#254337,#254346,#254348,.T.); +#254346 = VERTEX_POINT('',#254347); +#254347 = CARTESIAN_POINT('',(136.990459,-43.152919,1.585)); +#254348 = LINE('',#254349,#254350); +#254349 = CARTESIAN_POINT('',(136.779745,-43.152919,1.585)); +#254350 = VECTOR('',#254351,1.); +#254351 = DIRECTION('',(1.,0.,0.)); +#254352 = ORIENTED_EDGE('',*,*,#254353,.T.); +#254353 = EDGE_CURVE('',#254346,#254354,#254356,.T.); +#254354 = VERTEX_POINT('',#254355); +#254355 = CARTESIAN_POINT('',(136.990459,-42.456604,1.585)); +#254356 = LINE('',#254357,#254358); +#254357 = CARTESIAN_POINT('',(136.990459,-43.152919,1.585)); +#254358 = VECTOR('',#254359,1.); +#254359 = DIRECTION('',(0.,1.,0.)); +#254360 = ORIENTED_EDGE('',*,*,#254361,.T.); +#254361 = EDGE_CURVE('',#254354,#254362,#254364,.T.); +#254362 = VERTEX_POINT('',#254363); +#254363 = CARTESIAN_POINT('',(136.914823,-42.529131,1.585)); +#254364 = LINE('',#254365,#254366); +#254365 = CARTESIAN_POINT('',(136.990459,-42.456604,1.585)); +#254366 = VECTOR('',#254367,1.); +#254367 = DIRECTION('',(-0.721785571395,-0.692116745156,0.)); +#254368 = ORIENTED_EDGE('',*,*,#254369,.T.); +#254369 = EDGE_CURVE('',#254362,#254370,#254372,.T.); +#254370 = VERTEX_POINT('',#254371); +#254371 = CARTESIAN_POINT('',(136.799554,-42.58597,1.585)); +#254372 = LINE('',#254373,#254374); +#254373 = CARTESIAN_POINT('',(136.914823,-42.529131,1.585)); +#254374 = VECTOR('',#254375,1.); +#254375 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#254376 = ORIENTED_EDGE('',*,*,#254377,.T.); +#254377 = EDGE_CURVE('',#254370,#254378,#254380,.T.); +#254378 = VERTEX_POINT('',#254379); +#254379 = CARTESIAN_POINT('',(136.746204,-42.446551,1.585)); +#254380 = CIRCLE('',#254381,7.500005272361E-02); +#254381 = AXIS2_PLACEMENT_3D('',#254382,#254383,#254384); +#254382 = CARTESIAN_POINT('',(136.77974455676,-42.51363332972,1.585)); +#254383 = DIRECTION('',(0.,0.,-1.)); +#254384 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#254385 = ORIENTED_EDGE('',*,*,#254386,.T.); +#254386 = EDGE_CURVE('',#254378,#254387,#254389,.T.); +#254387 = VERTEX_POINT('',#254388); +#254388 = CARTESIAN_POINT('',(136.830556,-42.404375,1.585)); +#254389 = LINE('',#254390,#254391); +#254390 = CARTESIAN_POINT('',(136.746204,-42.446551,1.585)); +#254391 = VECTOR('',#254392,1.); +#254392 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#254393 = ORIENTED_EDGE('',*,*,#254394,.T.); +#254394 = EDGE_CURVE('',#254387,#254395,#254397,.T.); +#254395 = VERTEX_POINT('',#254396); +#254396 = CARTESIAN_POINT('',(136.911935,-42.322996,1.585)); +#254397 = LINE('',#254398,#254399); +#254398 = CARTESIAN_POINT('',(136.830556,-42.404375,1.585)); +#254399 = VECTOR('',#254400,1.); +#254400 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254401 = ORIENTED_EDGE('',*,*,#254402,.T.); +#254402 = EDGE_CURVE('',#254395,#254277,#254403,.T.); +#254403 = LINE('',#254404,#254405); +#254404 = CARTESIAN_POINT('',(136.911935,-42.322996,1.585)); +#254405 = VECTOR('',#254406,1.); +#254406 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#254407 = PLANE('',#254408); +#254408 = AXIS2_PLACEMENT_3D('',#254409,#254410,#254411); +#254409 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254410 = DIRECTION('',(0.,0.,1.)); +#254411 = DIRECTION('',(1.,0.,-0.)); +#254412 = SHELL_BASED_SURFACE_MODEL('',(#254413)); +#254413 = OPEN_SHELL('',(#254414)); +#254414 = ADVANCED_FACE('',(#254415),#254549,.T.); +#254415 = FACE_BOUND('',#254416,.F.); +#254416 = EDGE_LOOP('',(#254417,#254427,#254435,#254444,#254452,#254460, + #254469,#254477,#254486,#254494,#254502,#254510,#254518,#254527, + #254535,#254543)); +#254417 = ORIENTED_EDGE('',*,*,#254418,.T.); +#254418 = EDGE_CURVE('',#254419,#254421,#254423,.T.); +#254419 = VERTEX_POINT('',#254420); +#254420 = CARTESIAN_POINT('',(137.964752,-42.174941,1.585)); +#254421 = VERTEX_POINT('',#254422); +#254422 = CARTESIAN_POINT('',(138.003208,-42.15436,1.585)); +#254423 = LINE('',#254424,#254425); +#254424 = CARTESIAN_POINT('',(137.964752,-42.174941,1.585)); +#254425 = VECTOR('',#254426,1.); +#254426 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#254427 = ORIENTED_EDGE('',*,*,#254428,.T.); +#254428 = EDGE_CURVE('',#254421,#254429,#254431,.T.); +#254429 = VERTEX_POINT('',#254430); +#254430 = CARTESIAN_POINT('',(138.025045,-42.15436,1.585)); +#254431 = LINE('',#254432,#254433); +#254432 = CARTESIAN_POINT('',(138.003208,-42.15436,1.585)); +#254433 = VECTOR('',#254434,1.); +#254434 = DIRECTION('',(1.,0.,0.)); +#254435 = ORIENTED_EDGE('',*,*,#254436,.T.); +#254436 = EDGE_CURVE('',#254429,#254437,#254439,.T.); +#254437 = VERTEX_POINT('',#254438); +#254438 = CARTESIAN_POINT('',(138.09284,-42.227919,1.585)); +#254439 = CIRCLE('',#254440,7.216898094227E-02); +#254440 = AXIS2_PLACEMENT_3D('',#254441,#254442,#254443); +#254441 = CARTESIAN_POINT('',(138.02068706389,-42.22639728342,1.585)); +#254442 = DIRECTION('',(0.,0.,-1.)); +#254443 = DIRECTION('',(6.038516895266E-02,0.998175150648,0.)); +#254444 = ORIENTED_EDGE('',*,*,#254445,.T.); +#254445 = EDGE_CURVE('',#254437,#254446,#254448,.T.); +#254446 = VERTEX_POINT('',#254447); +#254447 = CARTESIAN_POINT('',(138.09284,-43.152919,1.585)); +#254448 = LINE('',#254449,#254450); +#254449 = CARTESIAN_POINT('',(138.09284,-42.227919,1.585)); +#254450 = VECTOR('',#254451,1.); +#254451 = DIRECTION('',(0.,-1.,0.)); +#254452 = ORIENTED_EDGE('',*,*,#254453,.T.); +#254453 = EDGE_CURVE('',#254446,#254454,#254456,.T.); +#254454 = VERTEX_POINT('',#254455); +#254455 = CARTESIAN_POINT('',(138.318186,-43.15436,1.585)); +#254456 = LINE('',#254457,#254458); +#254457 = CARTESIAN_POINT('',(138.09284,-43.152919,1.585)); +#254458 = VECTOR('',#254459,1.); +#254459 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#254460 = ORIENTED_EDGE('',*,*,#254461,.T.); +#254461 = EDGE_CURVE('',#254454,#254462,#254464,.T.); +#254462 = VERTEX_POINT('',#254463); +#254463 = CARTESIAN_POINT('',(138.303554,-43.302919,1.585)); +#254464 = CIRCLE('',#254465,7.500006711465E-02); +#254465 = AXIS2_PLACEMENT_3D('',#254466,#254467,#254468); +#254466 = CARTESIAN_POINT('',(138.30355406711,-43.22791893288,1.585)); +#254467 = DIRECTION('',(0.,0.,-1.)); +#254468 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254469 = ORIENTED_EDGE('',*,*,#254470,.T.); +#254470 = EDGE_CURVE('',#254462,#254471,#254473,.T.); +#254471 = VERTEX_POINT('',#254472); +#254472 = CARTESIAN_POINT('',(137.717494,-43.301478,1.585)); +#254473 = LINE('',#254474,#254475); +#254474 = CARTESIAN_POINT('',(138.303554,-43.302919,1.585)); +#254475 = VECTOR('',#254476,1.); +#254476 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#254477 = ORIENTED_EDGE('',*,*,#254478,.T.); +#254478 = EDGE_CURVE('',#254471,#254479,#254481,.T.); +#254479 = VERTEX_POINT('',#254480); +#254480 = CARTESIAN_POINT('',(137.732126,-43.152919,1.585)); +#254481 = CIRCLE('',#254482,7.500006711464E-02); +#254482 = AXIS2_PLACEMENT_3D('',#254483,#254484,#254485); +#254483 = CARTESIAN_POINT('',(137.73212593288,-43.22791906711,1.585)); +#254484 = DIRECTION('',(0.,0.,-1.)); +#254485 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#254486 = ORIENTED_EDGE('',*,*,#254487,.T.); +#254487 = EDGE_CURVE('',#254479,#254488,#254490,.T.); +#254488 = VERTEX_POINT('',#254489); +#254489 = CARTESIAN_POINT('',(137.94284,-43.152919,1.585)); +#254490 = LINE('',#254491,#254492); +#254491 = CARTESIAN_POINT('',(137.732126,-43.152919,1.585)); +#254492 = VECTOR('',#254493,1.); +#254493 = DIRECTION('',(1.,0.,0.)); +#254494 = ORIENTED_EDGE('',*,*,#254495,.T.); +#254495 = EDGE_CURVE('',#254488,#254496,#254498,.T.); +#254496 = VERTEX_POINT('',#254497); +#254497 = CARTESIAN_POINT('',(137.94284,-42.456604,1.585)); +#254498 = LINE('',#254499,#254500); +#254499 = CARTESIAN_POINT('',(137.94284,-43.152919,1.585)); +#254500 = VECTOR('',#254501,1.); +#254501 = DIRECTION('',(0.,1.,0.)); +#254502 = ORIENTED_EDGE('',*,*,#254503,.T.); +#254503 = EDGE_CURVE('',#254496,#254504,#254506,.T.); +#254504 = VERTEX_POINT('',#254505); +#254505 = CARTESIAN_POINT('',(137.867204,-42.529131,1.585)); +#254506 = LINE('',#254507,#254508); +#254507 = CARTESIAN_POINT('',(137.94284,-42.456604,1.585)); +#254508 = VECTOR('',#254509,1.); +#254509 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#254510 = ORIENTED_EDGE('',*,*,#254511,.T.); +#254511 = EDGE_CURVE('',#254504,#254512,#254514,.T.); +#254512 = VERTEX_POINT('',#254513); +#254513 = CARTESIAN_POINT('',(137.751935,-42.58597,1.585)); +#254514 = LINE('',#254515,#254516); +#254515 = CARTESIAN_POINT('',(137.867204,-42.529131,1.585)); +#254516 = VECTOR('',#254517,1.); +#254517 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#254518 = ORIENTED_EDGE('',*,*,#254519,.T.); +#254519 = EDGE_CURVE('',#254512,#254520,#254522,.T.); +#254520 = VERTEX_POINT('',#254521); +#254521 = CARTESIAN_POINT('',(137.698585,-42.446551,1.585)); +#254522 = CIRCLE('',#254523,7.500005272361E-02); +#254523 = AXIS2_PLACEMENT_3D('',#254524,#254525,#254526); +#254524 = CARTESIAN_POINT('',(137.73212555676,-42.51363332972,1.585)); +#254525 = DIRECTION('',(0.,0.,-1.)); +#254526 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#254527 = ORIENTED_EDGE('',*,*,#254528,.T.); +#254528 = EDGE_CURVE('',#254520,#254529,#254531,.T.); +#254529 = VERTEX_POINT('',#254530); +#254530 = CARTESIAN_POINT('',(137.782937,-42.404375,1.585)); +#254531 = LINE('',#254532,#254533); +#254532 = CARTESIAN_POINT('',(137.698585,-42.446551,1.585)); +#254533 = VECTOR('',#254534,1.); +#254534 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#254535 = ORIENTED_EDGE('',*,*,#254536,.T.); +#254536 = EDGE_CURVE('',#254529,#254537,#254539,.T.); +#254537 = VERTEX_POINT('',#254538); +#254538 = CARTESIAN_POINT('',(137.864316,-42.322996,1.585)); +#254539 = LINE('',#254540,#254541); +#254540 = CARTESIAN_POINT('',(137.782937,-42.404375,1.585)); +#254541 = VECTOR('',#254542,1.); +#254542 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254543 = ORIENTED_EDGE('',*,*,#254544,.T.); +#254544 = EDGE_CURVE('',#254537,#254419,#254545,.T.); +#254545 = LINE('',#254546,#254547); +#254546 = CARTESIAN_POINT('',(137.864316,-42.322996,1.585)); +#254547 = VECTOR('',#254548,1.); +#254548 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#254549 = PLANE('',#254550); +#254550 = AXIS2_PLACEMENT_3D('',#254551,#254552,#254553); +#254551 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254552 = DIRECTION('',(0.,0.,1.)); +#254553 = DIRECTION('',(1.,0.,-0.)); +#254554 = SHELL_BASED_SURFACE_MODEL('',(#254555)); +#254555 = OPEN_SHELL('',(#254556)); +#254556 = ADVANCED_FACE('',(#254557,#254635),#254687,.T.); +#254557 = FACE_BOUND('',#254558,.F.); +#254558 = EDGE_LOOP('',(#254559,#254570,#254578,#254587,#254595,#254604, + #254612,#254620,#254629)); +#254559 = ORIENTED_EDGE('',*,*,#254560,.T.); +#254560 = EDGE_CURVE('',#254561,#254563,#254565,.T.); +#254561 = VERTEX_POINT('',#254562); +#254562 = CARTESIAN_POINT('',(101.129996,-42.213287,1.585)); +#254563 = VERTEX_POINT('',#254564); +#254564 = CARTESIAN_POINT('',(101.203555,-42.152919,1.585)); +#254565 = CIRCLE('',#254566,7.500074938982E-02); +#254566 = AXIS2_PLACEMENT_3D('',#254567,#254568,#254569); +#254567 = CARTESIAN_POINT('',(101.20355546611,-42.22791974938,1.585)); +#254568 = DIRECTION('',(0.,0.,-1.)); +#254569 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#254570 = ORIENTED_EDGE('',*,*,#254571,.T.); +#254571 = EDGE_CURVE('',#254563,#254572,#254574,.T.); +#254572 = VERTEX_POINT('',#254573); +#254573 = CARTESIAN_POINT('',(101.599139,-42.15436,1.585)); +#254574 = LINE('',#254575,#254576); +#254575 = CARTESIAN_POINT('',(101.203555,-42.152919,1.585)); +#254576 = VECTOR('',#254577,1.); +#254577 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#254578 = ORIENTED_EDGE('',*,*,#254579,.T.); +#254579 = EDGE_CURVE('',#254572,#254580,#254582,.T.); +#254580 = VERTEX_POINT('',#254581); +#254581 = CARTESIAN_POINT('',(101.848542,-42.403763,1.585)); +#254582 = CIRCLE('',#254583,0.347870264855); +#254583 = AXIS2_PLACEMENT_3D('',#254584,#254585,#254586); +#254584 = CARTESIAN_POINT('',(101.51181126502,-42.49109073497,1.585)); +#254585 = DIRECTION('',(0.,0.,-1.)); +#254586 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#254587 = ORIENTED_EDGE('',*,*,#254588,.T.); +#254588 = EDGE_CURVE('',#254580,#254589,#254591,.T.); +#254589 = VERTEX_POINT('',#254590); +#254590 = CARTESIAN_POINT('',(101.84732,-42.581062,1.585)); +#254591 = LINE('',#254592,#254593); +#254592 = CARTESIAN_POINT('',(101.848542,-42.403763,1.585)); +#254593 = VECTOR('',#254594,1.); +#254594 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#254595 = ORIENTED_EDGE('',*,*,#254596,.T.); +#254596 = EDGE_CURVE('',#254589,#254597,#254599,.T.); +#254597 = VERTEX_POINT('',#254598); +#254598 = CARTESIAN_POINT('',(101.599139,-42.825287,1.585)); +#254599 = CIRCLE('',#254600,0.348632345848); +#254600 = AXIS2_PLACEMENT_3D('',#254601,#254602,#254603); +#254601 = CARTESIAN_POINT('',(101.51137019403,-42.4878834593,1.585)); +#254602 = DIRECTION('',(0.,0.,-1.)); +#254603 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#254604 = ORIENTED_EDGE('',*,*,#254605,.T.); +#254605 = EDGE_CURVE('',#254597,#254606,#254608,.T.); +#254606 = VERTEX_POINT('',#254607); +#254607 = CARTESIAN_POINT('',(101.278555,-42.826728,1.585)); +#254608 = LINE('',#254609,#254610); +#254609 = CARTESIAN_POINT('',(101.599139,-42.825287,1.585)); +#254610 = VECTOR('',#254611,1.); +#254611 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#254612 = ORIENTED_EDGE('',*,*,#254613,.T.); +#254613 = EDGE_CURVE('',#254606,#254614,#254616,.T.); +#254614 = VERTEX_POINT('',#254615); +#254615 = CARTESIAN_POINT('',(101.277114,-43.242551,1.585)); +#254616 = LINE('',#254617,#254618); +#254617 = CARTESIAN_POINT('',(101.278555,-42.826728,1.585)); +#254618 = VECTOR('',#254619,1.); +#254619 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#254620 = ORIENTED_EDGE('',*,*,#254621,.T.); +#254621 = EDGE_CURVE('',#254614,#254622,#254624,.T.); +#254622 = VERTEX_POINT('',#254623); +#254623 = CARTESIAN_POINT('',(101.128555,-43.227919,1.585)); +#254624 = CIRCLE('',#254625,7.500006711463E-02); +#254625 = AXIS2_PLACEMENT_3D('',#254626,#254627,#254628); +#254626 = CARTESIAN_POINT('',(101.20355506711,-43.22791906711,1.585)); +#254627 = DIRECTION('',(-0.,0.,-1.)); +#254628 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#254629 = ORIENTED_EDGE('',*,*,#254630,.T.); +#254630 = EDGE_CURVE('',#254622,#254561,#254631,.T.); +#254631 = LINE('',#254632,#254633); +#254632 = CARTESIAN_POINT('',(101.128555,-43.227919,1.585)); +#254633 = VECTOR('',#254634,1.); +#254634 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#254635 = FACE_BOUND('',#254636,.F.); +#254636 = EDGE_LOOP('',(#254637,#254648,#254656,#254664,#254672,#254681) + ); +#254637 = ORIENTED_EDGE('',*,*,#254638,.T.); +#254638 = EDGE_CURVE('',#254639,#254641,#254643,.T.); +#254639 = VERTEX_POINT('',#254640); +#254640 = CARTESIAN_POINT('',(101.699983,-42.4361,1.585)); +#254641 = VERTEX_POINT('',#254642); +#254642 = CARTESIAN_POINT('',(101.566802,-42.302919,1.585)); +#254643 = CIRCLE('',#254644,0.18686440374); +#254644 = AXIS2_PLACEMENT_3D('',#254645,#254646,#254647); +#254645 = CARTESIAN_POINT('',(101.519266,-42.483636,1.585)); +#254646 = DIRECTION('',(0.,0.,1.)); +#254647 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#254648 = ORIENTED_EDGE('',*,*,#254649,.T.); +#254649 = EDGE_CURVE('',#254641,#254650,#254652,.T.); +#254650 = VERTEX_POINT('',#254651); +#254651 = CARTESIAN_POINT('',(101.278555,-42.302919,1.585)); +#254652 = LINE('',#254653,#254654); +#254653 = CARTESIAN_POINT('',(101.566802,-42.302919,1.585)); +#254654 = VECTOR('',#254655,1.); +#254655 = DIRECTION('',(-1.,0.,0.)); +#254656 = ORIENTED_EDGE('',*,*,#254657,.T.); +#254657 = EDGE_CURVE('',#254650,#254658,#254660,.T.); +#254658 = VERTEX_POINT('',#254659); +#254659 = CARTESIAN_POINT('',(101.278555,-42.676728,1.585)); +#254660 = LINE('',#254661,#254662); +#254661 = CARTESIAN_POINT('',(101.278555,-42.302919,1.585)); +#254662 = VECTOR('',#254663,1.); +#254663 = DIRECTION('',(0.,-1.,0.)); +#254664 = ORIENTED_EDGE('',*,*,#254665,.T.); +#254665 = EDGE_CURVE('',#254658,#254666,#254668,.T.); +#254666 = VERTEX_POINT('',#254667); +#254667 = CARTESIAN_POINT('',(101.566802,-42.676728,1.585)); +#254668 = LINE('',#254669,#254670); +#254669 = CARTESIAN_POINT('',(101.278555,-42.676728,1.585)); +#254670 = VECTOR('',#254671,1.); +#254671 = DIRECTION('',(1.,0.,0.)); +#254672 = ORIENTED_EDGE('',*,*,#254673,.T.); +#254673 = EDGE_CURVE('',#254666,#254674,#254676,.T.); +#254674 = VERTEX_POINT('',#254675); +#254675 = CARTESIAN_POINT('',(101.699983,-42.543547,1.585)); +#254676 = CIRCLE('',#254677,0.18686440374); +#254677 = AXIS2_PLACEMENT_3D('',#254678,#254679,#254680); +#254678 = CARTESIAN_POINT('',(101.519266,-42.496011,1.585)); +#254679 = DIRECTION('',(0.,0.,1.)); +#254680 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#254681 = ORIENTED_EDGE('',*,*,#254682,.T.); +#254682 = EDGE_CURVE('',#254674,#254639,#254683,.T.); +#254683 = LINE('',#254684,#254685); +#254684 = CARTESIAN_POINT('',(101.699983,-42.543547,1.585)); +#254685 = VECTOR('',#254686,1.); +#254686 = DIRECTION('',(0.,1.,0.)); +#254687 = PLANE('',#254688); +#254688 = AXIS2_PLACEMENT_3D('',#254689,#254690,#254691); +#254689 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254690 = DIRECTION('',(0.,0.,1.)); +#254691 = DIRECTION('',(1.,0.,-0.)); +#254692 = SHELL_BASED_SURFACE_MODEL('',(#254693)); +#254693 = OPEN_SHELL('',(#254694)); +#254694 = ADVANCED_FACE('',(#254695),#254890,.T.); +#254695 = FACE_BOUND('',#254696,.F.); +#254696 = EDGE_LOOP('',(#254697,#254708,#254716,#254725,#254733,#254741, + #254749,#254757,#254766,#254774,#254783,#254791,#254799,#254807, + #254816,#254824,#254833,#254841,#254850,#254858,#254867,#254875, + #254884)); +#254697 = ORIENTED_EDGE('',*,*,#254698,.T.); +#254698 = EDGE_CURVE('',#254699,#254701,#254703,.T.); +#254699 = VERTEX_POINT('',#254700); +#254700 = CARTESIAN_POINT('',(102.131817,-42.20604,1.585)); +#254701 = VERTEX_POINT('',#254702); +#254702 = CARTESIAN_POINT('',(102.203555,-42.152919,1.585)); +#254703 = CIRCLE('',#254704,7.500336100771E-02); +#254704 = AXIS2_PLACEMENT_3D('',#254705,#254706,#254707); +#254705 = CARTESIAN_POINT('',(102.2035572707,-42.22792236097,1.585)); +#254706 = DIRECTION('',(0.,0.,-1.)); +#254707 = DIRECTION('',(-0.956494078934,0.29175173858,0.)); +#254708 = ORIENTED_EDGE('',*,*,#254709,.T.); +#254709 = EDGE_CURVE('',#254701,#254710,#254712,.T.); +#254710 = VERTEX_POINT('',#254711); +#254711 = CARTESIAN_POINT('',(102.694377,-42.15436,1.585)); +#254712 = LINE('',#254713,#254714); +#254713 = CARTESIAN_POINT('',(102.203555,-42.152919,1.585)); +#254714 = VECTOR('',#254715,1.); +#254715 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#254716 = ORIENTED_EDGE('',*,*,#254717,.T.); +#254717 = EDGE_CURVE('',#254710,#254718,#254720,.T.); +#254718 = VERTEX_POINT('',#254719); +#254719 = CARTESIAN_POINT('',(102.679745,-42.302919,1.585)); +#254720 = CIRCLE('',#254721,7.500006711465E-02); +#254721 = AXIS2_PLACEMENT_3D('',#254722,#254723,#254724); +#254722 = CARTESIAN_POINT('',(102.67974506711,-42.22791893288,1.585)); +#254723 = DIRECTION('',(0.,0.,-1.)); +#254724 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#254725 = ORIENTED_EDGE('',*,*,#254726,.T.); +#254726 = EDGE_CURVE('',#254718,#254727,#254729,.T.); +#254727 = VERTEX_POINT('',#254728); +#254728 = CARTESIAN_POINT('',(102.271429,-42.302919,1.585)); +#254729 = LINE('',#254730,#254731); +#254730 = CARTESIAN_POINT('',(102.679745,-42.302919,1.585)); +#254731 = VECTOR('',#254732,1.); +#254732 = DIRECTION('',(-1.,0.,0.)); +#254733 = ORIENTED_EDGE('',*,*,#254734,.T.); +#254734 = EDGE_CURVE('',#254727,#254735,#254737,.T.); +#254735 = VERTEX_POINT('',#254736); +#254736 = CARTESIAN_POINT('',(102.24661,-42.551109,1.585)); +#254737 = LINE('',#254738,#254739); +#254738 = CARTESIAN_POINT('',(102.271429,-42.302919,1.585)); +#254739 = VECTOR('',#254740,1.); +#254740 = DIRECTION('',(-9.950371902098E-02,-0.99503719021,0.)); +#254741 = ORIENTED_EDGE('',*,*,#254742,.T.); +#254742 = EDGE_CURVE('',#254735,#254743,#254745,.T.); +#254743 = VERTEX_POINT('',#254744); +#254744 = CARTESIAN_POINT('',(102.284161,-42.535312,1.585)); +#254745 = LINE('',#254746,#254747); +#254746 = CARTESIAN_POINT('',(102.24661,-42.551109,1.585)); +#254747 = VECTOR('',#254748,1.); +#254748 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#254749 = ORIENTED_EDGE('',*,*,#254750,.T.); +#254750 = EDGE_CURVE('',#254743,#254751,#254753,.T.); +#254751 = VERTEX_POINT('',#254752); +#254752 = CARTESIAN_POINT('',(102.556697,-42.536534,1.585)); +#254753 = LINE('',#254754,#254755); +#254754 = CARTESIAN_POINT('',(102.284161,-42.535312,1.585)); +#254755 = VECTOR('',#254756,1.); +#254756 = DIRECTION('',(0.99998994787,-4.483766241165E-03,0.)); +#254757 = ORIENTED_EDGE('',*,*,#254758,.T.); +#254758 = EDGE_CURVE('',#254751,#254759,#254761,.T.); +#254759 = VERTEX_POINT('',#254760); +#254760 = CARTESIAN_POINT('',(102.800923,-42.784715,1.585)); +#254761 = CIRCLE('',#254762,0.348625649748); +#254762 = AXIS2_PLACEMENT_3D('',#254763,#254764,#254765); +#254763 = CARTESIAN_POINT('',(102.46352504586,-42.87247868387,1.585)); +#254764 = DIRECTION('',(0.,0.,-1.)); +#254765 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#254766 = ORIENTED_EDGE('',*,*,#254767,.T.); +#254767 = EDGE_CURVE('',#254759,#254768,#254770,.T.); +#254768 = VERTEX_POINT('',#254769); +#254769 = CARTESIAN_POINT('',(102.799701,-43.057252,1.585)); +#254770 = LINE('',#254771,#254772); +#254771 = CARTESIAN_POINT('',(102.800923,-42.784715,1.585)); +#254772 = VECTOR('',#254773,1.); +#254773 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#254774 = ORIENTED_EDGE('',*,*,#254775,.T.); +#254775 = EDGE_CURVE('',#254768,#254776,#254778,.T.); +#254776 = VERTEX_POINT('',#254777); +#254777 = CARTESIAN_POINT('',(102.55152,-43.301478,1.585)); +#254778 = CIRCLE('',#254779,0.348635327447); +#254779 = AXIS2_PLACEMENT_3D('',#254780,#254781,#254782); +#254780 = CARTESIAN_POINT('',(102.46374848129,-42.96407208415,1.585)); +#254781 = DIRECTION('',(0.,0.,-1.)); +#254782 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#254783 = ORIENTED_EDGE('',*,*,#254784,.T.); +#254784 = EDGE_CURVE('',#254776,#254785,#254787,.T.); +#254785 = VERTEX_POINT('',#254786); +#254786 = CARTESIAN_POINT('',(102.278983,-43.300256,1.585)); +#254787 = LINE('',#254788,#254789); +#254788 = CARTESIAN_POINT('',(102.55152,-43.301478,1.585)); +#254789 = VECTOR('',#254790,1.); +#254790 = DIRECTION('',(-0.999989947943,4.483749789542E-03,0.)); +#254791 = ORIENTED_EDGE('',*,*,#254792,.T.); +#254792 = EDGE_CURVE('',#254785,#254793,#254795,.T.); +#254793 = VERTEX_POINT('',#254794); +#254794 = CARTESIAN_POINT('',(102.15627,-43.23805,1.585)); +#254795 = LINE('',#254796,#254797); +#254796 = CARTESIAN_POINT('',(102.278983,-43.300256,1.585)); +#254797 = VECTOR('',#254798,1.); +#254798 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#254799 = ORIENTED_EDGE('',*,*,#254800,.T.); +#254800 = EDGE_CURVE('',#254793,#254801,#254803,.T.); +#254801 = VERTEX_POINT('',#254802); +#254802 = CARTESIAN_POINT('',(102.093575,-43.174347,1.585)); +#254803 = LINE('',#254804,#254805); +#254804 = CARTESIAN_POINT('',(102.15627,-43.23805,1.585)); +#254805 = VECTOR('',#254806,1.); +#254806 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#254807 = ORIENTED_EDGE('',*,*,#254808,.T.); +#254808 = EDGE_CURVE('',#254801,#254809,#254811,.T.); +#254809 = VERTEX_POINT('',#254810); +#254810 = CARTESIAN_POINT('',(102.20897,-43.079648,1.585)); +#254811 = CIRCLE('',#254812,7.50001266804E-02); +#254812 = AXIS2_PLACEMENT_3D('',#254813,#254814,#254815); +#254813 = CARTESIAN_POINT('',(102.15593605199,-43.13268024831,1.585)); +#254814 = DIRECTION('',(0.,0.,-1.)); +#254815 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#254816 = ORIENTED_EDGE('',*,*,#254817,.T.); +#254817 = EDGE_CURVE('',#254809,#254818,#254820,.T.); +#254818 = VERTEX_POINT('',#254819); +#254819 = CARTESIAN_POINT('',(102.247982,-43.118661,1.585)); +#254820 = LINE('',#254821,#254822); +#254821 = CARTESIAN_POINT('',(102.20897,-43.079648,1.585)); +#254822 = VECTOR('',#254823,1.); +#254823 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#254824 = ORIENTED_EDGE('',*,*,#254825,.T.); +#254825 = EDGE_CURVE('',#254818,#254826,#254828,.T.); +#254826 = VERTEX_POINT('',#254827); +#254827 = CARTESIAN_POINT('',(102.587698,-43.118661,1.585)); +#254828 = CIRCLE('',#254829,0.305620374329); +#254829 = AXIS2_PLACEMENT_3D('',#254830,#254831,#254832); +#254830 = CARTESIAN_POINT('',(102.41784,-42.86459,1.585)); +#254831 = DIRECTION('',(0.,0.,1.)); +#254832 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#254833 = ORIENTED_EDGE('',*,*,#254834,.T.); +#254834 = EDGE_CURVE('',#254826,#254835,#254837,.T.); +#254835 = VERTEX_POINT('',#254836); +#254836 = CARTESIAN_POINT('',(102.618105,-43.088253,1.585)); +#254837 = LINE('',#254838,#254839); +#254838 = CARTESIAN_POINT('',(102.587698,-43.118661,1.585)); +#254839 = VECTOR('',#254840,1.); +#254840 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#254841 = ORIENTED_EDGE('',*,*,#254842,.T.); +#254842 = EDGE_CURVE('',#254835,#254843,#254845,.T.); +#254843 = VERTEX_POINT('',#254844); +#254844 = CARTESIAN_POINT('',(102.618106,-42.748536,1.585)); +#254845 = CIRCLE('',#254846,0.305616146029); +#254846 = AXIS2_PLACEMENT_3D('',#254847,#254848,#254849); +#254847 = CARTESIAN_POINT('',(102.36403992049,-42.91839375212,1.585)); +#254848 = DIRECTION('',(0.,-0.,1.)); +#254849 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#254850 = ORIENTED_EDGE('',*,*,#254851,.T.); +#254851 = EDGE_CURVE('',#254843,#254852,#254854,.T.); +#254852 = VERTEX_POINT('',#254853); +#254853 = CARTESIAN_POINT('',(102.587699,-42.718129,1.585)); +#254854 = LINE('',#254855,#254856); +#254855 = CARTESIAN_POINT('',(102.618106,-42.748536,1.585)); +#254856 = VECTOR('',#254857,1.); +#254857 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#254858 = ORIENTED_EDGE('',*,*,#254859,.T.); +#254859 = EDGE_CURVE('',#254852,#254860,#254862,.T.); +#254860 = VERTEX_POINT('',#254861); +#254861 = CARTESIAN_POINT('',(102.247982,-42.718129,1.585)); +#254862 = CIRCLE('',#254863,0.305621483548); +#254863 = AXIS2_PLACEMENT_3D('',#254864,#254865,#254866); +#254864 = CARTESIAN_POINT('',(102.4178405,-42.972201,1.585)); +#254865 = DIRECTION('',(0.,0.,1.)); +#254866 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#254867 = ORIENTED_EDGE('',*,*,#254868,.T.); +#254868 = EDGE_CURVE('',#254860,#254869,#254871,.T.); +#254869 = VERTEX_POINT('',#254870); +#254870 = CARTESIAN_POINT('',(102.191192,-42.770306,1.585)); +#254871 = LINE('',#254872,#254873); +#254872 = CARTESIAN_POINT('',(102.247982,-42.718129,1.585)); +#254873 = VECTOR('',#254874,1.); +#254874 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#254875 = ORIENTED_EDGE('',*,*,#254876,.T.); +#254876 = EDGE_CURVE('',#254869,#254877,#254879,.T.); +#254877 = VERTEX_POINT('',#254878); +#254878 = CARTESIAN_POINT('',(102.081286,-42.711349,1.585)); +#254879 = CIRCLE('',#254880,7.50002417247E-02); +#254880 = AXIS2_PLACEMENT_3D('',#254881,#254882,#254883); +#254881 = CARTESIAN_POINT('',(102.15593597002,-42.70410895619,1.585)); +#254882 = DIRECTION('',(-0.,0.,-1.)); +#254883 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#254884 = ORIENTED_EDGE('',*,*,#254885,.T.); +#254885 = EDGE_CURVE('',#254877,#254699,#254886,.T.); +#254886 = LINE('',#254887,#254888); +#254887 = CARTESIAN_POINT('',(102.081286,-42.711349,1.585)); +#254888 = VECTOR('',#254889,1.); +#254889 = DIRECTION('',(9.950391398789E-02,0.995037170713,0.)); +#254890 = PLANE('',#254891); +#254891 = AXIS2_PLACEMENT_3D('',#254892,#254893,#254894); +#254892 = CARTESIAN_POINT('',(0.,0.,1.585)); +#254893 = DIRECTION('',(0.,0.,1.)); +#254894 = DIRECTION('',(1.,0.,-0.)); +#254895 = SHELL_BASED_SURFACE_MODEL('',(#254896)); +#254896 = OPEN_SHELL('',(#254897)); +#254897 = ADVANCED_FACE('',(#254898,#254976),#255028,.T.); +#254898 = FACE_BOUND('',#254899,.F.); +#254899 = EDGE_LOOP('',(#254900,#254911,#254919,#254928,#254936,#254945, + #254953,#254961,#254970)); +#254900 = ORIENTED_EDGE('',*,*,#254901,.T.); +#254901 = EDGE_CURVE('',#254902,#254904,#254906,.T.); +#254902 = VERTEX_POINT('',#254903); +#254903 = CARTESIAN_POINT('',(117.403805,-42.213287,1.585)); +#254904 = VERTEX_POINT('',#254905); +#254905 = CARTESIAN_POINT('',(117.477364,-42.152919,1.585)); +#254906 = CIRCLE('',#254907,7.500074938982E-02); +#254907 = AXIS2_PLACEMENT_3D('',#254908,#254909,#254910); +#254908 = CARTESIAN_POINT('',(117.47736446611,-42.22791974938,1.585)); +#254909 = DIRECTION('',(0.,0.,-1.)); +#254910 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#254911 = ORIENTED_EDGE('',*,*,#254912,.T.); +#254912 = EDGE_CURVE('',#254904,#254913,#254915,.T.); +#254913 = VERTEX_POINT('',#254914); +#254914 = CARTESIAN_POINT('',(117.872948,-42.15436,1.585)); +#254915 = LINE('',#254916,#254917); +#254916 = CARTESIAN_POINT('',(117.477364,-42.152919,1.585)); +#254917 = VECTOR('',#254918,1.); +#254918 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#254919 = ORIENTED_EDGE('',*,*,#254920,.T.); +#254920 = EDGE_CURVE('',#254913,#254921,#254923,.T.); +#254921 = VERTEX_POINT('',#254922); +#254922 = CARTESIAN_POINT('',(118.122351,-42.403763,1.585)); +#254923 = CIRCLE('',#254924,0.347870264855); +#254924 = AXIS2_PLACEMENT_3D('',#254925,#254926,#254927); +#254925 = CARTESIAN_POINT('',(117.78562026502,-42.49109073497,1.585)); +#254926 = DIRECTION('',(0.,0.,-1.)); +#254927 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#254928 = ORIENTED_EDGE('',*,*,#254929,.T.); +#254929 = EDGE_CURVE('',#254921,#254930,#254932,.T.); +#254930 = VERTEX_POINT('',#254931); +#254931 = CARTESIAN_POINT('',(118.121129,-42.581062,1.585)); +#254932 = LINE('',#254933,#254934); +#254933 = CARTESIAN_POINT('',(118.122351,-42.403763,1.585)); +#254934 = VECTOR('',#254935,1.); +#254935 = DIRECTION('',(-6.892148157132E-03,-0.999976248865,0.)); +#254936 = ORIENTED_EDGE('',*,*,#254937,.T.); +#254937 = EDGE_CURVE('',#254930,#254938,#254940,.T.); +#254938 = VERTEX_POINT('',#254939); +#254939 = CARTESIAN_POINT('',(117.872948,-42.825287,1.585)); +#254940 = CIRCLE('',#254941,0.348632345848); +#254941 = AXIS2_PLACEMENT_3D('',#254942,#254943,#254944); +#254942 = CARTESIAN_POINT('',(117.78517919403,-42.4878834593,1.585)); +#254943 = DIRECTION('',(0.,0.,-1.)); +#254944 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#254945 = ORIENTED_EDGE('',*,*,#254946,.T.); +#254946 = EDGE_CURVE('',#254938,#254947,#254949,.T.); +#254947 = VERTEX_POINT('',#254948); +#254948 = CARTESIAN_POINT('',(117.552364,-42.826728,1.585)); +#254949 = LINE('',#254950,#254951); +#254950 = CARTESIAN_POINT('',(117.872948,-42.825287,1.585)); +#254951 = VECTOR('',#254952,1.); +#254952 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#254953 = ORIENTED_EDGE('',*,*,#254954,.T.); +#254954 = EDGE_CURVE('',#254947,#254955,#254957,.T.); +#254955 = VERTEX_POINT('',#254956); +#254956 = CARTESIAN_POINT('',(117.550923,-43.242551,1.585)); +#254957 = LINE('',#254958,#254959); +#254958 = CARTESIAN_POINT('',(117.552364,-42.826728,1.585)); +#254959 = VECTOR('',#254960,1.); +#254960 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#254961 = ORIENTED_EDGE('',*,*,#254962,.T.); +#254962 = EDGE_CURVE('',#254955,#254963,#254965,.T.); +#254963 = VERTEX_POINT('',#254964); +#254964 = CARTESIAN_POINT('',(117.402364,-43.227919,1.585)); +#254965 = CIRCLE('',#254966,7.500006711463E-02); +#254966 = AXIS2_PLACEMENT_3D('',#254967,#254968,#254969); +#254967 = CARTESIAN_POINT('',(117.47736406711,-43.22791906711,1.585)); +#254968 = DIRECTION('',(-0.,0.,-1.)); +#254969 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#254970 = ORIENTED_EDGE('',*,*,#254971,.T.); +#254971 = EDGE_CURVE('',#254963,#254902,#254972,.T.); +#254972 = LINE('',#254973,#254974); +#254973 = CARTESIAN_POINT('',(117.402364,-43.227919,1.585)); +#254974 = VECTOR('',#254975,1.); +#254975 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#254976 = FACE_BOUND('',#254977,.F.); +#254977 = EDGE_LOOP('',(#254978,#254989,#254997,#255005,#255013,#255022) + ); +#254978 = ORIENTED_EDGE('',*,*,#254979,.T.); +#254979 = EDGE_CURVE('',#254980,#254982,#254984,.T.); +#254980 = VERTEX_POINT('',#254981); +#254981 = CARTESIAN_POINT('',(117.973792,-42.4361,1.585)); +#254982 = VERTEX_POINT('',#254983); +#254983 = CARTESIAN_POINT('',(117.840611,-42.302919,1.585)); +#254984 = CIRCLE('',#254985,0.18686440374); +#254985 = AXIS2_PLACEMENT_3D('',#254986,#254987,#254988); +#254986 = CARTESIAN_POINT('',(117.793075,-42.483636,1.585)); +#254987 = DIRECTION('',(0.,0.,1.)); +#254988 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#254989 = ORIENTED_EDGE('',*,*,#254990,.T.); +#254990 = EDGE_CURVE('',#254982,#254991,#254993,.T.); +#254991 = VERTEX_POINT('',#254992); +#254992 = CARTESIAN_POINT('',(117.552364,-42.302919,1.585)); +#254993 = LINE('',#254994,#254995); +#254994 = CARTESIAN_POINT('',(117.840611,-42.302919,1.585)); +#254995 = VECTOR('',#254996,1.); +#254996 = DIRECTION('',(-1.,0.,0.)); +#254997 = ORIENTED_EDGE('',*,*,#254998,.T.); +#254998 = EDGE_CURVE('',#254991,#254999,#255001,.T.); +#254999 = VERTEX_POINT('',#255000); +#255000 = CARTESIAN_POINT('',(117.552364,-42.676728,1.585)); +#255001 = LINE('',#255002,#255003); +#255002 = CARTESIAN_POINT('',(117.552364,-42.302919,1.585)); +#255003 = VECTOR('',#255004,1.); +#255004 = DIRECTION('',(0.,-1.,0.)); +#255005 = ORIENTED_EDGE('',*,*,#255006,.T.); +#255006 = EDGE_CURVE('',#254999,#255007,#255009,.T.); +#255007 = VERTEX_POINT('',#255008); +#255008 = CARTESIAN_POINT('',(117.840611,-42.676728,1.585)); +#255009 = LINE('',#255010,#255011); +#255010 = CARTESIAN_POINT('',(117.552364,-42.676728,1.585)); +#255011 = VECTOR('',#255012,1.); +#255012 = DIRECTION('',(1.,0.,0.)); +#255013 = ORIENTED_EDGE('',*,*,#255014,.T.); +#255014 = EDGE_CURVE('',#255007,#255015,#255017,.T.); +#255015 = VERTEX_POINT('',#255016); +#255016 = CARTESIAN_POINT('',(117.973792,-42.543547,1.585)); +#255017 = CIRCLE('',#255018,0.18686440374); +#255018 = AXIS2_PLACEMENT_3D('',#255019,#255020,#255021); +#255019 = CARTESIAN_POINT('',(117.793075,-42.496011,1.585)); +#255020 = DIRECTION('',(0.,0.,1.)); +#255021 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#255022 = ORIENTED_EDGE('',*,*,#255023,.T.); +#255023 = EDGE_CURVE('',#255015,#254980,#255024,.T.); +#255024 = LINE('',#255025,#255026); +#255025 = CARTESIAN_POINT('',(117.973792,-42.543547,1.585)); +#255026 = VECTOR('',#255027,1.); +#255027 = DIRECTION('',(0.,1.,0.)); +#255028 = PLANE('',#255029); +#255029 = AXIS2_PLACEMENT_3D('',#255030,#255031,#255032); +#255030 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255031 = DIRECTION('',(0.,0.,1.)); +#255032 = DIRECTION('',(1.,0.,-0.)); +#255033 = SHELL_BASED_SURFACE_MODEL('',(#255034)); +#255034 = OPEN_SHELL('',(#255035)); +#255035 = ADVANCED_FACE('',(#255036),#255222,.T.); +#255036 = FACE_BOUND('',#255037,.F.); +#255037 = EDGE_LOOP('',(#255038,#255049,#255057,#255066,#255074,#255082, + #255091,#255099,#255108,#255116,#255124,#255132,#255141,#255149, + #255158,#255166,#255175,#255183,#255191,#255199,#255208,#255216)); +#255038 = ORIENTED_EDGE('',*,*,#255039,.T.); +#255039 = EDGE_CURVE('',#255040,#255042,#255044,.T.); +#255040 = VERTEX_POINT('',#255041); +#255041 = CARTESIAN_POINT('',(119.319875,-42.301478,1.585)); +#255042 = VERTEX_POINT('',#255043); +#255043 = CARTESIAN_POINT('',(119.334507,-42.152919,1.585)); +#255044 = CIRCLE('',#255045,7.500006711465E-02); +#255045 = AXIS2_PLACEMENT_3D('',#255046,#255047,#255048); +#255046 = CARTESIAN_POINT('',(119.33450693288,-42.22791906711,1.585)); +#255047 = DIRECTION('',(0.,0.,-1.)); +#255048 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#255049 = ORIENTED_EDGE('',*,*,#255050,.T.); +#255050 = EDGE_CURVE('',#255042,#255051,#255053,.T.); +#255051 = VERTEX_POINT('',#255052); +#255052 = CARTESIAN_POINT('',(119.961292,-42.153681,1.585)); +#255053 = LINE('',#255054,#255055); +#255054 = CARTESIAN_POINT('',(119.334507,-42.152919,1.585)); +#255055 = VECTOR('',#255056,1.); +#255056 = DIRECTION('',(0.999999261004,-1.215726982756E-03,0.)); +#255057 = ORIENTED_EDGE('',*,*,#255058,.T.); +#255058 = EDGE_CURVE('',#255051,#255059,#255061,.T.); +#255059 = VERTEX_POINT('',#255060); +#255060 = CARTESIAN_POINT('',(120.027113,-42.242551,1.585)); +#255061 = CIRCLE('',#255062,7.447391611625E-02); +#255062 = AXIS2_PLACEMENT_3D('',#255063,#255064,#255065); +#255063 = CARTESIAN_POINT('',(119.95411292664,-42.2278080874,1.585)); +#255064 = DIRECTION('',(0.,0.,-1.)); +#255065 = DIRECTION('',(9.639715124795E-02,0.995342950561,0.)); +#255066 = ORIENTED_EDGE('',*,*,#255067,.T.); +#255067 = EDGE_CURVE('',#255059,#255068,#255070,.T.); +#255068 = VERTEX_POINT('',#255069); +#255069 = CARTESIAN_POINT('',(120.009997,-42.277307,1.585)); +#255070 = LINE('',#255071,#255072); +#255071 = CARTESIAN_POINT('',(120.027113,-42.242551,1.585)); +#255072 = VECTOR('',#255073,1.); +#255073 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#255074 = ORIENTED_EDGE('',*,*,#255075,.T.); +#255075 = EDGE_CURVE('',#255068,#255076,#255078,.T.); +#255076 = VERTEX_POINT('',#255077); +#255077 = CARTESIAN_POINT('',(119.783101,-42.536616,1.585)); +#255078 = LINE('',#255079,#255080); +#255079 = CARTESIAN_POINT('',(120.009997,-42.277307,1.585)); +#255080 = VECTOR('',#255081,1.); +#255081 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#255082 = ORIENTED_EDGE('',*,*,#255083,.T.); +#255083 = EDGE_CURVE('',#255076,#255084,#255086,.T.); +#255084 = VERTEX_POINT('',#255085); +#255085 = CARTESIAN_POINT('',(120.027113,-42.784715,1.585)); +#255086 = CIRCLE('',#255087,0.348520834816); +#255087 = AXIS2_PLACEMENT_3D('',#255088,#255089,#255090); +#255088 = CARTESIAN_POINT('',(119.6898076174,-42.87241819931,1.585)); +#255089 = DIRECTION('',(0.,0.,-1.)); +#255090 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#255091 = ORIENTED_EDGE('',*,*,#255092,.T.); +#255092 = EDGE_CURVE('',#255084,#255093,#255095,.T.); +#255093 = VERTEX_POINT('',#255094); +#255094 = CARTESIAN_POINT('',(120.025891,-43.057252,1.585)); +#255095 = LINE('',#255096,#255097); +#255096 = CARTESIAN_POINT('',(120.027113,-42.784715,1.585)); +#255097 = VECTOR('',#255098,1.); +#255098 = DIRECTION('',(-4.483749789516E-03,-0.999989947943,0.)); +#255099 = ORIENTED_EDGE('',*,*,#255100,.T.); +#255100 = EDGE_CURVE('',#255093,#255101,#255103,.T.); +#255101 = VERTEX_POINT('',#255102); +#255102 = CARTESIAN_POINT('',(119.77771,-43.301478,1.585)); +#255103 = CIRCLE('',#255104,0.348635327447); +#255104 = AXIS2_PLACEMENT_3D('',#255105,#255106,#255107); +#255105 = CARTESIAN_POINT('',(119.68993848129,-42.96407208415,1.585)); +#255106 = DIRECTION('',(0.,0.,-1.)); +#255107 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#255108 = ORIENTED_EDGE('',*,*,#255109,.T.); +#255109 = EDGE_CURVE('',#255101,#255110,#255112,.T.); +#255110 = VERTEX_POINT('',#255111); +#255111 = CARTESIAN_POINT('',(119.457554,-43.300256,1.585)); +#255112 = LINE('',#255113,#255114); +#255113 = CARTESIAN_POINT('',(119.77771,-43.301478,1.585)); +#255114 = VECTOR('',#255115,1.); +#255115 = DIRECTION('',(-0.999992715758,3.816861463354E-03,0.)); +#255116 = ORIENTED_EDGE('',*,*,#255117,.T.); +#255117 = EDGE_CURVE('',#255110,#255118,#255120,.T.); +#255118 = VERTEX_POINT('',#255119); +#255119 = CARTESIAN_POINT('',(119.334841,-43.23805,1.585)); +#255120 = LINE('',#255121,#255122); +#255121 = CARTESIAN_POINT('',(119.457554,-43.300256,1.585)); +#255122 = VECTOR('',#255123,1.); +#255123 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#255124 = ORIENTED_EDGE('',*,*,#255125,.T.); +#255125 = EDGE_CURVE('',#255118,#255126,#255128,.T.); +#255126 = VERTEX_POINT('',#255127); +#255127 = CARTESIAN_POINT('',(119.272146,-43.174347,1.585)); +#255128 = LINE('',#255129,#255130); +#255129 = CARTESIAN_POINT('',(119.334841,-43.23805,1.585)); +#255130 = VECTOR('',#255131,1.); +#255131 = DIRECTION('',(-0.701445434384,0.712723159847,0.)); +#255132 = ORIENTED_EDGE('',*,*,#255133,.T.); +#255133 = EDGE_CURVE('',#255126,#255134,#255136,.T.); +#255134 = VERTEX_POINT('',#255135); +#255135 = CARTESIAN_POINT('',(119.387541,-43.079648,1.585)); +#255136 = CIRCLE('',#255137,7.50001266804E-02); +#255137 = AXIS2_PLACEMENT_3D('',#255138,#255139,#255140); +#255138 = CARTESIAN_POINT('',(119.33450705199,-43.13268024831,1.585)); +#255139 = DIRECTION('',(0.,0.,-1.)); +#255140 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#255141 = ORIENTED_EDGE('',*,*,#255142,.T.); +#255142 = EDGE_CURVE('',#255134,#255143,#255145,.T.); +#255143 = VERTEX_POINT('',#255144); +#255144 = CARTESIAN_POINT('',(119.426553,-43.118661,1.585)); +#255145 = LINE('',#255146,#255147); +#255146 = CARTESIAN_POINT('',(119.387541,-43.079648,1.585)); +#255147 = VECTOR('',#255148,1.); +#255148 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#255149 = ORIENTED_EDGE('',*,*,#255150,.T.); +#255150 = EDGE_CURVE('',#255143,#255151,#255153,.T.); +#255151 = VERTEX_POINT('',#255152); +#255152 = CARTESIAN_POINT('',(119.813888,-43.118661,1.585)); +#255153 = CIRCLE('',#255154,0.358502380266); +#255154 = AXIS2_PLACEMENT_3D('',#255155,#255156,#255157); +#255155 = CARTESIAN_POINT('',(119.6202205,-42.816971,1.585)); +#255156 = DIRECTION('',(0.,0.,1.)); +#255157 = DIRECTION('',(-0.540212591772,-0.841528582813,0.)); +#255158 = ORIENTED_EDGE('',*,*,#255159,.T.); +#255159 = EDGE_CURVE('',#255151,#255160,#255162,.T.); +#255160 = VERTEX_POINT('',#255161); +#255161 = CARTESIAN_POINT('',(119.844295,-43.088253,1.585)); +#255162 = LINE('',#255163,#255164); +#255163 = CARTESIAN_POINT('',(119.813888,-43.118661,1.585)); +#255164 = VECTOR('',#255165,1.); +#255165 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#255166 = ORIENTED_EDGE('',*,*,#255167,.T.); +#255167 = EDGE_CURVE('',#255160,#255168,#255170,.T.); +#255168 = VERTEX_POINT('',#255169); +#255169 = CARTESIAN_POINT('',(119.844296,-42.748536,1.585)); +#255170 = CIRCLE('',#255171,0.305616146029); +#255171 = AXIS2_PLACEMENT_3D('',#255172,#255173,#255174); +#255172 = CARTESIAN_POINT('',(119.59022992049,-42.91839375212,1.585)); +#255173 = DIRECTION('',(0.,-0.,1.)); +#255174 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#255175 = ORIENTED_EDGE('',*,*,#255176,.T.); +#255176 = EDGE_CURVE('',#255168,#255177,#255179,.T.); +#255177 = VERTEX_POINT('',#255178); +#255178 = CARTESIAN_POINT('',(119.813889,-42.718129,1.585)); +#255179 = LINE('',#255180,#255181); +#255180 = CARTESIAN_POINT('',(119.844296,-42.748536,1.585)); +#255181 = VECTOR('',#255182,1.); +#255182 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#255183 = ORIENTED_EDGE('',*,*,#255184,.T.); +#255184 = EDGE_CURVE('',#255177,#255185,#255187,.T.); +#255185 = VERTEX_POINT('',#255186); +#255186 = CARTESIAN_POINT('',(119.745373,-42.683871,1.585)); +#255187 = LINE('',#255188,#255189); +#255188 = CARTESIAN_POINT('',(119.813889,-42.718129,1.585)); +#255189 = VECTOR('',#255190,1.); +#255190 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#255191 = ORIENTED_EDGE('',*,*,#255192,.T.); +#255192 = EDGE_CURVE('',#255185,#255193,#255195,.T.); +#255193 = VERTEX_POINT('',#255194); +#255194 = CARTESIAN_POINT('',(119.605589,-42.68243,1.585)); +#255195 = LINE('',#255196,#255197); +#255196 = CARTESIAN_POINT('',(119.745373,-42.683871,1.585)); +#255197 = VECTOR('',#255198,1.); +#255198 = DIRECTION('',(-0.999946868947,1.030821437474E-02,0.)); +#255199 = ORIENTED_EDGE('',*,*,#255200,.T.); +#255200 = EDGE_CURVE('',#255193,#255201,#255203,.T.); +#255201 = VERTEX_POINT('',#255202); +#255202 = CARTESIAN_POINT('',(119.563778,-42.559483,1.585)); +#255203 = CIRCLE('',#255204,7.500015628755E-02); +#255204 = AXIS2_PLACEMENT_3D('',#255205,#255206,#255207); +#255205 = CARTESIAN_POINT('',(119.62022128432,-42.6088710461,1.585)); +#255206 = DIRECTION('',(0.,0.,-1.)); +#255207 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#255208 = ORIENTED_EDGE('',*,*,#255209,.T.); +#255209 = EDGE_CURVE('',#255201,#255210,#255212,.T.); +#255210 = VERTEX_POINT('',#255211); +#255211 = CARTESIAN_POINT('',(119.788272,-42.302919,1.585)); +#255212 = LINE('',#255213,#255214); +#255213 = CARTESIAN_POINT('',(119.563778,-42.559483,1.585)); +#255214 = VECTOR('',#255215,1.); +#255215 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#255216 = ORIENTED_EDGE('',*,*,#255217,.T.); +#255217 = EDGE_CURVE('',#255210,#255040,#255218,.T.); +#255218 = LINE('',#255219,#255220); +#255219 = CARTESIAN_POINT('',(119.788272,-42.302919,1.585)); +#255220 = VECTOR('',#255221,1.); +#255221 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#255222 = PLANE('',#255223); +#255223 = AXIS2_PLACEMENT_3D('',#255224,#255225,#255226); +#255224 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255225 = DIRECTION('',(0.,0.,1.)); +#255226 = DIRECTION('',(1.,0.,-0.)); +#255227 = SHELL_BASED_SURFACE_MODEL('',(#255228)); +#255228 = OPEN_SHELL('',(#255229)); +#255229 = ADVANCED_FACE('',(#255230,#255308),#255360,.T.); +#255230 = FACE_BOUND('',#255231,.F.); +#255231 = EDGE_LOOP('',(#255232,#255243,#255251,#255260,#255268,#255277, + #255285,#255293,#255302)); +#255232 = ORIENTED_EDGE('',*,*,#255233,.T.); +#255233 = EDGE_CURVE('',#255234,#255236,#255238,.T.); +#255234 = VERTEX_POINT('',#255235); +#255235 = CARTESIAN_POINT('',(127.629996,-42.213287,1.585)); +#255236 = VERTEX_POINT('',#255237); +#255237 = CARTESIAN_POINT('',(127.703555,-42.152919,1.585)); +#255238 = CIRCLE('',#255239,7.500074938982E-02); +#255239 = AXIS2_PLACEMENT_3D('',#255240,#255241,#255242); +#255240 = CARTESIAN_POINT('',(127.70355546611,-42.22791974938,1.585)); +#255241 = DIRECTION('',(0.,0.,-1.)); +#255242 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#255243 = ORIENTED_EDGE('',*,*,#255244,.T.); +#255244 = EDGE_CURVE('',#255236,#255245,#255247,.T.); +#255245 = VERTEX_POINT('',#255246); +#255246 = CARTESIAN_POINT('',(128.099139,-42.15436,1.585)); +#255247 = LINE('',#255248,#255249); +#255248 = CARTESIAN_POINT('',(127.703555,-42.152919,1.585)); +#255249 = VECTOR('',#255250,1.); +#255250 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#255251 = ORIENTED_EDGE('',*,*,#255252,.T.); +#255252 = EDGE_CURVE('',#255245,#255253,#255255,.T.); +#255253 = VERTEX_POINT('',#255254); +#255254 = CARTESIAN_POINT('',(128.348542,-42.403763,1.585)); +#255255 = CIRCLE('',#255256,0.347870264855); +#255256 = AXIS2_PLACEMENT_3D('',#255257,#255258,#255259); +#255257 = CARTESIAN_POINT('',(128.01181126502,-42.49109073497,1.585)); +#255258 = DIRECTION('',(0.,0.,-1.)); +#255259 = DIRECTION('',(0.251035353679,0.967977918758,0.)); +#255260 = ORIENTED_EDGE('',*,*,#255261,.T.); +#255261 = EDGE_CURVE('',#255253,#255262,#255264,.T.); +#255262 = VERTEX_POINT('',#255263); +#255263 = CARTESIAN_POINT('',(128.34732,-42.581062,1.585)); +#255264 = LINE('',#255265,#255266); +#255265 = CARTESIAN_POINT('',(128.348542,-42.403763,1.585)); +#255266 = VECTOR('',#255267,1.); +#255267 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#255268 = ORIENTED_EDGE('',*,*,#255269,.T.); +#255269 = EDGE_CURVE('',#255262,#255270,#255272,.T.); +#255270 = VERTEX_POINT('',#255271); +#255271 = CARTESIAN_POINT('',(128.099139,-42.825287,1.585)); +#255272 = CIRCLE('',#255273,0.348632345849); +#255273 = AXIS2_PLACEMENT_3D('',#255274,#255275,#255276); +#255274 = CARTESIAN_POINT('',(128.01137019403,-42.4878834593,1.585)); +#255275 = DIRECTION('',(0.,0.,-1.)); +#255276 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#255277 = ORIENTED_EDGE('',*,*,#255278,.T.); +#255278 = EDGE_CURVE('',#255270,#255279,#255281,.T.); +#255279 = VERTEX_POINT('',#255280); +#255280 = CARTESIAN_POINT('',(127.778555,-42.826728,1.585)); +#255281 = LINE('',#255282,#255283); +#255282 = CARTESIAN_POINT('',(128.099139,-42.825287,1.585)); +#255283 = VECTOR('',#255284,1.); +#255284 = DIRECTION('',(-0.999989897992,-4.494876360038E-03,0.)); +#255285 = ORIENTED_EDGE('',*,*,#255286,.T.); +#255286 = EDGE_CURVE('',#255279,#255287,#255289,.T.); +#255287 = VERTEX_POINT('',#255288); +#255288 = CARTESIAN_POINT('',(127.777114,-43.242551,1.585)); +#255289 = LINE('',#255290,#255291); +#255290 = CARTESIAN_POINT('',(127.778555,-42.826728,1.585)); +#255291 = VECTOR('',#255292,1.); +#255292 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#255293 = ORIENTED_EDGE('',*,*,#255294,.T.); +#255294 = EDGE_CURVE('',#255287,#255295,#255297,.T.); +#255295 = VERTEX_POINT('',#255296); +#255296 = CARTESIAN_POINT('',(127.628555,-43.227919,1.585)); +#255297 = CIRCLE('',#255298,7.500006711463E-02); +#255298 = AXIS2_PLACEMENT_3D('',#255299,#255300,#255301); +#255299 = CARTESIAN_POINT('',(127.70355506711,-43.22791906711,1.585)); +#255300 = DIRECTION('',(-0.,0.,-1.)); +#255301 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#255302 = ORIENTED_EDGE('',*,*,#255303,.T.); +#255303 = EDGE_CURVE('',#255295,#255234,#255304,.T.); +#255304 = LINE('',#255305,#255306); +#255305 = CARTESIAN_POINT('',(127.628555,-43.227919,1.585)); +#255306 = VECTOR('',#255307,1.); +#255307 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#255308 = FACE_BOUND('',#255309,.F.); +#255309 = EDGE_LOOP('',(#255310,#255321,#255329,#255337,#255345,#255354) + ); +#255310 = ORIENTED_EDGE('',*,*,#255311,.T.); +#255311 = EDGE_CURVE('',#255312,#255314,#255316,.T.); +#255312 = VERTEX_POINT('',#255313); +#255313 = CARTESIAN_POINT('',(128.199983,-42.4361,1.585)); +#255314 = VERTEX_POINT('',#255315); +#255315 = CARTESIAN_POINT('',(128.066802,-42.302919,1.585)); +#255316 = CIRCLE('',#255317,0.18686440374); +#255317 = AXIS2_PLACEMENT_3D('',#255318,#255319,#255320); +#255318 = CARTESIAN_POINT('',(128.019266,-42.483636,1.585)); +#255319 = DIRECTION('',(0.,0.,1.)); +#255320 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#255321 = ORIENTED_EDGE('',*,*,#255322,.T.); +#255322 = EDGE_CURVE('',#255314,#255323,#255325,.T.); +#255323 = VERTEX_POINT('',#255324); +#255324 = CARTESIAN_POINT('',(127.778555,-42.302919,1.585)); +#255325 = LINE('',#255326,#255327); +#255326 = CARTESIAN_POINT('',(128.066802,-42.302919,1.585)); +#255327 = VECTOR('',#255328,1.); +#255328 = DIRECTION('',(-1.,0.,0.)); +#255329 = ORIENTED_EDGE('',*,*,#255330,.T.); +#255330 = EDGE_CURVE('',#255323,#255331,#255333,.T.); +#255331 = VERTEX_POINT('',#255332); +#255332 = CARTESIAN_POINT('',(127.778555,-42.676728,1.585)); +#255333 = LINE('',#255334,#255335); +#255334 = CARTESIAN_POINT('',(127.778555,-42.302919,1.585)); +#255335 = VECTOR('',#255336,1.); +#255336 = DIRECTION('',(0.,-1.,0.)); +#255337 = ORIENTED_EDGE('',*,*,#255338,.T.); +#255338 = EDGE_CURVE('',#255331,#255339,#255341,.T.); +#255339 = VERTEX_POINT('',#255340); +#255340 = CARTESIAN_POINT('',(128.066802,-42.676728,1.585)); +#255341 = LINE('',#255342,#255343); +#255342 = CARTESIAN_POINT('',(127.778555,-42.676728,1.585)); +#255343 = VECTOR('',#255344,1.); +#255344 = DIRECTION('',(1.,0.,0.)); +#255345 = ORIENTED_EDGE('',*,*,#255346,.T.); +#255346 = EDGE_CURVE('',#255339,#255347,#255349,.T.); +#255347 = VERTEX_POINT('',#255348); +#255348 = CARTESIAN_POINT('',(128.199983,-42.543547,1.585)); +#255349 = CIRCLE('',#255350,0.18686440374); +#255350 = AXIS2_PLACEMENT_3D('',#255351,#255352,#255353); +#255351 = CARTESIAN_POINT('',(128.019266,-42.496011,1.585)); +#255352 = DIRECTION('',(0.,0.,1.)); +#255353 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#255354 = ORIENTED_EDGE('',*,*,#255355,.T.); +#255355 = EDGE_CURVE('',#255347,#255312,#255356,.T.); +#255356 = LINE('',#255357,#255358); +#255357 = CARTESIAN_POINT('',(128.199983,-42.543547,1.585)); +#255358 = VECTOR('',#255359,1.); +#255359 = DIRECTION('',(0.,1.,0.)); +#255360 = PLANE('',#255361); +#255361 = AXIS2_PLACEMENT_3D('',#255362,#255363,#255364); +#255362 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255363 = DIRECTION('',(0.,0.,1.)); +#255364 = DIRECTION('',(1.,0.,-0.)); +#255365 = SHELL_BASED_SURFACE_MODEL('',(#255366)); +#255366 = OPEN_SHELL('',(#255367)); +#255367 = ADVANCED_FACE('',(#255368,#255446),#255498,.T.); +#255368 = FACE_BOUND('',#255369,.F.); +#255369 = EDGE_LOOP('',(#255370,#255381,#255389,#255398,#255406,#255415, + #255423,#255431,#255440)); +#255370 = ORIENTED_EDGE('',*,*,#255371,.T.); +#255371 = EDGE_CURVE('',#255372,#255374,#255376,.T.); +#255372 = VERTEX_POINT('',#255373); +#255373 = CARTESIAN_POINT('',(135.753805,-42.213287,1.585)); +#255374 = VERTEX_POINT('',#255375); +#255375 = CARTESIAN_POINT('',(135.827364,-42.152919,1.585)); +#255376 = CIRCLE('',#255377,7.500074938986E-02); +#255377 = AXIS2_PLACEMENT_3D('',#255378,#255379,#255380); +#255378 = CARTESIAN_POINT('',(135.82736446611,-42.22791974938,1.585)); +#255379 = DIRECTION('',(0.,0.,-1.)); +#255380 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#255381 = ORIENTED_EDGE('',*,*,#255382,.T.); +#255382 = EDGE_CURVE('',#255374,#255383,#255385,.T.); +#255383 = VERTEX_POINT('',#255384); +#255384 = CARTESIAN_POINT('',(136.222948,-42.15436,1.585)); +#255385 = LINE('',#255386,#255387); +#255386 = CARTESIAN_POINT('',(135.827364,-42.152919,1.585)); +#255387 = VECTOR('',#255388,1.); +#255388 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#255389 = ORIENTED_EDGE('',*,*,#255390,.T.); +#255390 = EDGE_CURVE('',#255383,#255391,#255393,.T.); +#255391 = VERTEX_POINT('',#255392); +#255392 = CARTESIAN_POINT('',(136.472351,-42.403763,1.585)); +#255393 = CIRCLE('',#255394,0.347870264855); +#255394 = AXIS2_PLACEMENT_3D('',#255395,#255396,#255397); +#255395 = CARTESIAN_POINT('',(136.13562026502,-42.49109073497,1.585)); +#255396 = DIRECTION('',(0.,0.,-1.)); +#255397 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#255398 = ORIENTED_EDGE('',*,*,#255399,.T.); +#255399 = EDGE_CURVE('',#255391,#255400,#255402,.T.); +#255400 = VERTEX_POINT('',#255401); +#255401 = CARTESIAN_POINT('',(136.471129,-42.581062,1.585)); +#255402 = LINE('',#255403,#255404); +#255403 = CARTESIAN_POINT('',(136.472351,-42.403763,1.585)); +#255404 = VECTOR('',#255405,1.); +#255405 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#255406 = ORIENTED_EDGE('',*,*,#255407,.T.); +#255407 = EDGE_CURVE('',#255400,#255408,#255410,.T.); +#255408 = VERTEX_POINT('',#255409); +#255409 = CARTESIAN_POINT('',(136.222948,-42.825287,1.585)); +#255410 = CIRCLE('',#255411,0.348632345848); +#255411 = AXIS2_PLACEMENT_3D('',#255412,#255413,#255414); +#255412 = CARTESIAN_POINT('',(136.13517919403,-42.4878834593,1.585)); +#255413 = DIRECTION('',(0.,0.,-1.)); +#255414 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#255415 = ORIENTED_EDGE('',*,*,#255416,.T.); +#255416 = EDGE_CURVE('',#255408,#255417,#255419,.T.); +#255417 = VERTEX_POINT('',#255418); +#255418 = CARTESIAN_POINT('',(135.902364,-42.826728,1.585)); +#255419 = LINE('',#255420,#255421); +#255420 = CARTESIAN_POINT('',(136.222948,-42.825287,1.585)); +#255421 = VECTOR('',#255422,1.); +#255422 = DIRECTION('',(-0.999989897992,-4.494876360039E-03,0.)); +#255423 = ORIENTED_EDGE('',*,*,#255424,.T.); +#255424 = EDGE_CURVE('',#255417,#255425,#255427,.T.); +#255425 = VERTEX_POINT('',#255426); +#255426 = CARTESIAN_POINT('',(135.900923,-43.242551,1.585)); +#255427 = LINE('',#255428,#255429); +#255428 = CARTESIAN_POINT('',(135.902364,-42.826728,1.585)); +#255429 = VECTOR('',#255430,1.); +#255430 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#255431 = ORIENTED_EDGE('',*,*,#255432,.T.); +#255432 = EDGE_CURVE('',#255425,#255433,#255435,.T.); +#255433 = VERTEX_POINT('',#255434); +#255434 = CARTESIAN_POINT('',(135.752364,-43.227919,1.585)); +#255435 = CIRCLE('',#255436,7.500006711464E-02); +#255436 = AXIS2_PLACEMENT_3D('',#255437,#255438,#255439); +#255437 = CARTESIAN_POINT('',(135.82736406711,-43.22791906711,1.585)); +#255438 = DIRECTION('',(-0.,0.,-1.)); +#255439 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#255440 = ORIENTED_EDGE('',*,*,#255441,.T.); +#255441 = EDGE_CURVE('',#255433,#255372,#255442,.T.); +#255442 = LINE('',#255443,#255444); +#255443 = CARTESIAN_POINT('',(135.752364,-43.227919,1.585)); +#255444 = VECTOR('',#255445,1.); +#255445 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#255446 = FACE_BOUND('',#255447,.F.); +#255447 = EDGE_LOOP('',(#255448,#255459,#255467,#255475,#255483,#255492) + ); +#255448 = ORIENTED_EDGE('',*,*,#255449,.T.); +#255449 = EDGE_CURVE('',#255450,#255452,#255454,.T.); +#255450 = VERTEX_POINT('',#255451); +#255451 = CARTESIAN_POINT('',(136.323792,-42.4361,1.585)); +#255452 = VERTEX_POINT('',#255453); +#255453 = CARTESIAN_POINT('',(136.190611,-42.302919,1.585)); +#255454 = CIRCLE('',#255455,0.18686440374); +#255455 = AXIS2_PLACEMENT_3D('',#255456,#255457,#255458); +#255456 = CARTESIAN_POINT('',(136.143075,-42.483636,1.585)); +#255457 = DIRECTION('',(0.,0.,1.)); +#255458 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#255459 = ORIENTED_EDGE('',*,*,#255460,.T.); +#255460 = EDGE_CURVE('',#255452,#255461,#255463,.T.); +#255461 = VERTEX_POINT('',#255462); +#255462 = CARTESIAN_POINT('',(135.902364,-42.302919,1.585)); +#255463 = LINE('',#255464,#255465); +#255464 = CARTESIAN_POINT('',(136.190611,-42.302919,1.585)); +#255465 = VECTOR('',#255466,1.); +#255466 = DIRECTION('',(-1.,0.,0.)); +#255467 = ORIENTED_EDGE('',*,*,#255468,.T.); +#255468 = EDGE_CURVE('',#255461,#255469,#255471,.T.); +#255469 = VERTEX_POINT('',#255470); +#255470 = CARTESIAN_POINT('',(135.902364,-42.676728,1.585)); +#255471 = LINE('',#255472,#255473); +#255472 = CARTESIAN_POINT('',(135.902364,-42.302919,1.585)); +#255473 = VECTOR('',#255474,1.); +#255474 = DIRECTION('',(0.,-1.,0.)); +#255475 = ORIENTED_EDGE('',*,*,#255476,.T.); +#255476 = EDGE_CURVE('',#255469,#255477,#255479,.T.); +#255477 = VERTEX_POINT('',#255478); +#255478 = CARTESIAN_POINT('',(136.190611,-42.676728,1.585)); +#255479 = LINE('',#255480,#255481); +#255480 = CARTESIAN_POINT('',(135.902364,-42.676728,1.585)); +#255481 = VECTOR('',#255482,1.); +#255482 = DIRECTION('',(1.,0.,0.)); +#255483 = ORIENTED_EDGE('',*,*,#255484,.T.); +#255484 = EDGE_CURVE('',#255477,#255485,#255487,.T.); +#255485 = VERTEX_POINT('',#255486); +#255486 = CARTESIAN_POINT('',(136.323792,-42.543547,1.585)); +#255487 = CIRCLE('',#255488,0.18686440374); +#255488 = AXIS2_PLACEMENT_3D('',#255489,#255490,#255491); +#255489 = CARTESIAN_POINT('',(136.143075,-42.496011,1.585)); +#255490 = DIRECTION('',(0.,0.,1.)); +#255491 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#255492 = ORIENTED_EDGE('',*,*,#255493,.T.); +#255493 = EDGE_CURVE('',#255485,#255450,#255494,.T.); +#255494 = LINE('',#255495,#255496); +#255495 = CARTESIAN_POINT('',(136.323792,-42.543547,1.585)); +#255496 = VECTOR('',#255497,1.); +#255497 = DIRECTION('',(0.,1.,0.)); +#255498 = PLANE('',#255499); +#255499 = AXIS2_PLACEMENT_3D('',#255500,#255501,#255502); +#255500 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255501 = DIRECTION('',(0.,0.,1.)); +#255502 = DIRECTION('',(1.,0.,-0.)); +#255503 = SHELL_BASED_SURFACE_MODEL('',(#255504)); +#255504 = OPEN_SHELL('',(#255505)); +#255505 = ADVANCED_FACE('',(#255506),#255640,.T.); +#255506 = FACE_BOUND('',#255507,.F.); +#255507 = EDGE_LOOP('',(#255508,#255518,#255526,#255535,#255543,#255551, + #255560,#255568,#255577,#255585,#255593,#255601,#255609,#255618, + #255626,#255634)); +#255508 = ORIENTED_EDGE('',*,*,#255509,.T.); +#255509 = EDGE_CURVE('',#255510,#255512,#255514,.T.); +#255510 = VERTEX_POINT('',#255511); +#255511 = CARTESIAN_POINT('',(195.201062,-42.074941,1.585)); +#255512 = VERTEX_POINT('',#255513); +#255513 = CARTESIAN_POINT('',(195.239518,-42.05436,1.585)); +#255514 = LINE('',#255515,#255516); +#255515 = CARTESIAN_POINT('',(195.201062,-42.074941,1.585)); +#255516 = VECTOR('',#255517,1.); +#255517 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#255518 = ORIENTED_EDGE('',*,*,#255519,.T.); +#255519 = EDGE_CURVE('',#255512,#255520,#255522,.T.); +#255520 = VERTEX_POINT('',#255521); +#255521 = CARTESIAN_POINT('',(195.261355,-42.05436,1.585)); +#255522 = LINE('',#255523,#255524); +#255523 = CARTESIAN_POINT('',(195.239518,-42.05436,1.585)); +#255524 = VECTOR('',#255525,1.); +#255525 = DIRECTION('',(1.,0.,0.)); +#255526 = ORIENTED_EDGE('',*,*,#255527,.T.); +#255527 = EDGE_CURVE('',#255520,#255528,#255530,.T.); +#255528 = VERTEX_POINT('',#255529); +#255529 = CARTESIAN_POINT('',(195.32915,-42.127919,1.585)); +#255530 = CIRCLE('',#255531,7.216898094224E-02); +#255531 = AXIS2_PLACEMENT_3D('',#255532,#255533,#255534); +#255532 = CARTESIAN_POINT('',(195.25699706389,-42.12639728342,1.585)); +#255533 = DIRECTION('',(0.,0.,-1.)); +#255534 = DIRECTION('',(6.038516895228E-02,0.998175150648,0.)); +#255535 = ORIENTED_EDGE('',*,*,#255536,.T.); +#255536 = EDGE_CURVE('',#255528,#255537,#255539,.T.); +#255537 = VERTEX_POINT('',#255538); +#255538 = CARTESIAN_POINT('',(195.32915,-43.052919,1.585)); +#255539 = LINE('',#255540,#255541); +#255540 = CARTESIAN_POINT('',(195.32915,-42.127919,1.585)); +#255541 = VECTOR('',#255542,1.); +#255542 = DIRECTION('',(0.,-1.,0.)); +#255543 = ORIENTED_EDGE('',*,*,#255544,.T.); +#255544 = EDGE_CURVE('',#255537,#255545,#255547,.T.); +#255545 = VERTEX_POINT('',#255546); +#255546 = CARTESIAN_POINT('',(195.554496,-43.05436,1.585)); +#255547 = LINE('',#255548,#255549); +#255548 = CARTESIAN_POINT('',(195.32915,-43.052919,1.585)); +#255549 = VECTOR('',#255550,1.); +#255550 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#255551 = ORIENTED_EDGE('',*,*,#255552,.T.); +#255552 = EDGE_CURVE('',#255545,#255553,#255555,.T.); +#255553 = VERTEX_POINT('',#255554); +#255554 = CARTESIAN_POINT('',(195.539864,-43.202919,1.585)); +#255555 = CIRCLE('',#255556,7.500006711464E-02); +#255556 = AXIS2_PLACEMENT_3D('',#255557,#255558,#255559); +#255557 = CARTESIAN_POINT('',(195.53986406711,-43.12791893288,1.585)); +#255558 = DIRECTION('',(0.,0.,-1.)); +#255559 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#255560 = ORIENTED_EDGE('',*,*,#255561,.T.); +#255561 = EDGE_CURVE('',#255553,#255562,#255564,.T.); +#255562 = VERTEX_POINT('',#255563); +#255563 = CARTESIAN_POINT('',(194.953804,-43.201478,1.585)); +#255564 = LINE('',#255565,#255566); +#255565 = CARTESIAN_POINT('',(195.539864,-43.202919,1.585)); +#255566 = VECTOR('',#255567,1.); +#255567 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#255568 = ORIENTED_EDGE('',*,*,#255569,.T.); +#255569 = EDGE_CURVE('',#255562,#255570,#255572,.T.); +#255570 = VERTEX_POINT('',#255571); +#255571 = CARTESIAN_POINT('',(194.968436,-43.052919,1.585)); +#255572 = CIRCLE('',#255573,7.500006711464E-02); +#255573 = AXIS2_PLACEMENT_3D('',#255574,#255575,#255576); +#255574 = CARTESIAN_POINT('',(194.96843593288,-43.12791906711,1.585)); +#255575 = DIRECTION('',(0.,0.,-1.)); +#255576 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#255577 = ORIENTED_EDGE('',*,*,#255578,.T.); +#255578 = EDGE_CURVE('',#255570,#255579,#255581,.T.); +#255579 = VERTEX_POINT('',#255580); +#255580 = CARTESIAN_POINT('',(195.17915,-43.052919,1.585)); +#255581 = LINE('',#255582,#255583); +#255582 = CARTESIAN_POINT('',(194.968436,-43.052919,1.585)); +#255583 = VECTOR('',#255584,1.); +#255584 = DIRECTION('',(1.,0.,0.)); +#255585 = ORIENTED_EDGE('',*,*,#255586,.T.); +#255586 = EDGE_CURVE('',#255579,#255587,#255589,.T.); +#255587 = VERTEX_POINT('',#255588); +#255588 = CARTESIAN_POINT('',(195.17915,-42.356604,1.585)); +#255589 = LINE('',#255590,#255591); +#255590 = CARTESIAN_POINT('',(195.17915,-43.052919,1.585)); +#255591 = VECTOR('',#255592,1.); +#255592 = DIRECTION('',(0.,1.,0.)); +#255593 = ORIENTED_EDGE('',*,*,#255594,.T.); +#255594 = EDGE_CURVE('',#255587,#255595,#255597,.T.); +#255595 = VERTEX_POINT('',#255596); +#255596 = CARTESIAN_POINT('',(195.103514,-42.429131,1.585)); +#255597 = LINE('',#255598,#255599); +#255598 = CARTESIAN_POINT('',(195.17915,-42.356604,1.585)); +#255599 = VECTOR('',#255600,1.); +#255600 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#255601 = ORIENTED_EDGE('',*,*,#255602,.T.); +#255602 = EDGE_CURVE('',#255595,#255603,#255605,.T.); +#255603 = VERTEX_POINT('',#255604); +#255604 = CARTESIAN_POINT('',(194.988245,-42.48597,1.585)); +#255605 = LINE('',#255606,#255607); +#255606 = CARTESIAN_POINT('',(195.103514,-42.429131,1.585)); +#255607 = VECTOR('',#255608,1.); +#255608 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#255609 = ORIENTED_EDGE('',*,*,#255610,.T.); +#255610 = EDGE_CURVE('',#255603,#255611,#255613,.T.); +#255611 = VERTEX_POINT('',#255612); +#255612 = CARTESIAN_POINT('',(194.934895,-42.346551,1.585)); +#255613 = CIRCLE('',#255614,7.500005272361E-02); +#255614 = AXIS2_PLACEMENT_3D('',#255615,#255616,#255617); +#255615 = CARTESIAN_POINT('',(194.96843555676,-42.41363332972,1.585)); +#255616 = DIRECTION('',(0.,0.,-1.)); +#255617 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#255618 = ORIENTED_EDGE('',*,*,#255619,.T.); +#255619 = EDGE_CURVE('',#255611,#255620,#255622,.T.); +#255620 = VERTEX_POINT('',#255621); +#255621 = CARTESIAN_POINT('',(195.019247,-42.304375,1.585)); +#255622 = LINE('',#255623,#255624); +#255623 = CARTESIAN_POINT('',(194.934895,-42.346551,1.585)); +#255624 = VECTOR('',#255625,1.); +#255625 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#255626 = ORIENTED_EDGE('',*,*,#255627,.T.); +#255627 = EDGE_CURVE('',#255620,#255628,#255630,.T.); +#255628 = VERTEX_POINT('',#255629); +#255629 = CARTESIAN_POINT('',(195.100626,-42.222996,1.585)); +#255630 = LINE('',#255631,#255632); +#255631 = CARTESIAN_POINT('',(195.019247,-42.304375,1.585)); +#255632 = VECTOR('',#255633,1.); +#255633 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255634 = ORIENTED_EDGE('',*,*,#255635,.T.); +#255635 = EDGE_CURVE('',#255628,#255510,#255636,.T.); +#255636 = LINE('',#255637,#255638); +#255637 = CARTESIAN_POINT('',(195.100626,-42.222996,1.585)); +#255638 = VECTOR('',#255639,1.); +#255639 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#255640 = PLANE('',#255641); +#255641 = AXIS2_PLACEMENT_3D('',#255642,#255643,#255644); +#255642 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255643 = DIRECTION('',(0.,0.,1.)); +#255644 = DIRECTION('',(1.,0.,-0.)); +#255645 = SHELL_BASED_SURFACE_MODEL('',(#255646)); +#255646 = OPEN_SHELL('',(#255647)); +#255647 = ADVANCED_FACE('',(#255648),#255807,.T.); +#255648 = FACE_BOUND('',#255649,.F.); +#255649 = EDGE_LOOP('',(#255650,#255661,#255669,#255677,#255685,#255693, + #255701,#255709,#255718,#255726,#255735,#255743,#255751,#255759, + #255768,#255776,#255784,#255792,#255801)); +#255650 = ORIENTED_EDGE('',*,*,#255651,.T.); +#255651 = EDGE_CURVE('',#255652,#255654,#255656,.T.); +#255652 = VERTEX_POINT('',#255653); +#255653 = CARTESIAN_POINT('',(198.982514,-42.108456,1.585)); +#255654 = VERTEX_POINT('',#255655); +#255655 = CARTESIAN_POINT('',(199.491909,-42.117786,1.585)); +#255656 = CIRCLE('',#255657,0.450326844012); +#255657 = AXIS2_PLACEMENT_3D('',#255658,#255659,#255660); +#255658 = CARTESIAN_POINT('',(199.2304110301,-42.48440989199,1.585)); +#255659 = DIRECTION('',(0.,0.,-1.)); +#255660 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#255661 = ORIENTED_EDGE('',*,*,#255662,.T.); +#255662 = EDGE_CURVE('',#255654,#255663,#255665,.T.); +#255663 = VERTEX_POINT('',#255664); +#255664 = CARTESIAN_POINT('',(199.555362,-42.183316,1.585)); +#255665 = LINE('',#255666,#255667); +#255666 = CARTESIAN_POINT('',(199.491909,-42.117786,1.585)); +#255667 = VECTOR('',#255668,1.); +#255668 = DIRECTION('',(0.695630129574,-0.718400113327,0.)); +#255669 = ORIENTED_EDGE('',*,*,#255670,.T.); +#255670 = EDGE_CURVE('',#255663,#255671,#255673,.T.); +#255671 = VERTEX_POINT('',#255672); +#255672 = CARTESIAN_POINT('',(199.613423,-42.303763,1.585)); +#255673 = LINE('',#255674,#255675); +#255674 = CARTESIAN_POINT('',(199.555362,-42.183316,1.585)); +#255675 = VECTOR('',#255676,1.); +#255676 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#255677 = ORIENTED_EDGE('',*,*,#255678,.T.); +#255678 = EDGE_CURVE('',#255671,#255679,#255681,.T.); +#255679 = VERTEX_POINT('',#255680); +#255680 = CARTESIAN_POINT('',(199.612664,-42.430095,1.585)); +#255681 = LINE('',#255682,#255683); +#255682 = CARTESIAN_POINT('',(199.613423,-42.303763,1.585)); +#255683 = VECTOR('',#255684,1.); +#255684 = DIRECTION('',(-6.007870547658E-03,-0.999981952583,0.)); +#255685 = ORIENTED_EDGE('',*,*,#255686,.T.); +#255686 = EDGE_CURVE('',#255679,#255687,#255689,.T.); +#255687 = VERTEX_POINT('',#255688); +#255688 = CARTESIAN_POINT('',(199.554606,-42.598158,1.585)); +#255689 = LINE('',#255690,#255691); +#255690 = CARTESIAN_POINT('',(199.612664,-42.430095,1.585)); +#255691 = VECTOR('',#255692,1.); +#255692 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#255693 = ORIENTED_EDGE('',*,*,#255694,.T.); +#255694 = EDGE_CURVE('',#255687,#255695,#255697,.T.); +#255695 = VERTEX_POINT('',#255696); +#255696 = CARTESIAN_POINT('',(199.101883,-43.052919,1.585)); +#255697 = LINE('',#255698,#255699); +#255698 = CARTESIAN_POINT('',(199.554606,-42.598158,1.585)); +#255699 = VECTOR('',#255700,1.); +#255700 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#255701 = ORIENTED_EDGE('',*,*,#255702,.T.); +#255702 = EDGE_CURVE('',#255695,#255703,#255705,.T.); +#255703 = VERTEX_POINT('',#255704); +#255704 = CARTESIAN_POINT('',(199.554496,-43.05436,1.585)); +#255705 = LINE('',#255706,#255707); +#255706 = CARTESIAN_POINT('',(199.101883,-43.052919,1.585)); +#255707 = VECTOR('',#255708,1.); +#255708 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#255709 = ORIENTED_EDGE('',*,*,#255710,.T.); +#255710 = EDGE_CURVE('',#255703,#255711,#255713,.T.); +#255711 = VERTEX_POINT('',#255712); +#255712 = CARTESIAN_POINT('',(199.539864,-43.202919,1.585)); +#255713 = CIRCLE('',#255714,7.500006711464E-02); +#255714 = AXIS2_PLACEMENT_3D('',#255715,#255716,#255717); +#255715 = CARTESIAN_POINT('',(199.53986406711,-43.12791893288,1.585)); +#255716 = DIRECTION('',(0.,0.,-1.)); +#255717 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#255718 = ORIENTED_EDGE('',*,*,#255719,.T.); +#255719 = EDGE_CURVE('',#255711,#255720,#255722,.T.); +#255720 = VERTEX_POINT('',#255721); +#255721 = CARTESIAN_POINT('',(198.906185,-43.201478,1.585)); +#255722 = LINE('',#255723,#255724); +#255723 = CARTESIAN_POINT('',(199.539864,-43.202919,1.585)); +#255724 = VECTOR('',#255725,1.); +#255725 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#255726 = ORIENTED_EDGE('',*,*,#255727,.T.); +#255727 = EDGE_CURVE('',#255720,#255728,#255730,.T.); +#255728 = VERTEX_POINT('',#255729); +#255729 = CARTESIAN_POINT('',(198.867784,-43.074886,1.585)); +#255730 = CIRCLE('',#255731,7.500021013109E-02); +#255731 = AXIS2_PLACEMENT_3D('',#255732,#255733,#255734); +#255732 = CARTESIAN_POINT('',(198.9208173167,-43.12791899764,1.585)); +#255733 = DIRECTION('',(0.,0.,-1.)); +#255734 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#255735 = ORIENTED_EDGE('',*,*,#255736,.T.); +#255736 = EDGE_CURVE('',#255728,#255737,#255739,.T.); +#255737 = VERTEX_POINT('',#255738); +#255738 = CARTESIAN_POINT('',(199.426692,-42.515976,1.585)); +#255739 = LINE('',#255740,#255741); +#255740 = CARTESIAN_POINT('',(198.867784,-43.074886,1.585)); +#255741 = VECTOR('',#255742,1.); +#255742 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#255743 = ORIENTED_EDGE('',*,*,#255744,.T.); +#255744 = EDGE_CURVE('',#255737,#255745,#255747,.T.); +#255745 = VERTEX_POINT('',#255746); +#255746 = CARTESIAN_POINT('',(199.464864,-42.401463,1.585)); +#255747 = LINE('',#255748,#255749); +#255748 = CARTESIAN_POINT('',(199.426692,-42.515976,1.585)); +#255749 = VECTOR('',#255750,1.); +#255750 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#255751 = ORIENTED_EDGE('',*,*,#255752,.T.); +#255752 = EDGE_CURVE('',#255745,#255753,#255755,.T.); +#255753 = VERTEX_POINT('',#255754); +#255754 = CARTESIAN_POINT('',(199.464864,-42.3361,1.585)); +#255755 = LINE('',#255756,#255757); +#255756 = CARTESIAN_POINT('',(199.464864,-42.401463,1.585)); +#255757 = VECTOR('',#255758,1.); +#255758 = DIRECTION('',(0.,1.,0.)); +#255759 = ORIENTED_EDGE('',*,*,#255760,.T.); +#255760 = EDGE_CURVE('',#255753,#255761,#255763,.T.); +#255761 = VERTEX_POINT('',#255762); +#255762 = CARTESIAN_POINT('',(199.331683,-42.202919,1.585)); +#255763 = CIRCLE('',#255764,0.18686440374); +#255764 = AXIS2_PLACEMENT_3D('',#255765,#255766,#255767); +#255765 = CARTESIAN_POINT('',(199.284147,-42.383636,1.585)); +#255766 = DIRECTION('',(0.,0.,1.)); +#255767 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#255768 = ORIENTED_EDGE('',*,*,#255769,.T.); +#255769 = EDGE_CURVE('',#255761,#255770,#255772,.T.); +#255770 = VERTEX_POINT('',#255771); +#255771 = CARTESIAN_POINT('',(199.128998,-42.202919,1.585)); +#255772 = LINE('',#255773,#255774); +#255773 = CARTESIAN_POINT('',(199.331683,-42.202919,1.585)); +#255774 = VECTOR('',#255775,1.); +#255775 = DIRECTION('',(-1.,0.,0.)); +#255776 = ORIENTED_EDGE('',*,*,#255777,.T.); +#255777 = EDGE_CURVE('',#255770,#255778,#255780,.T.); +#255778 = VERTEX_POINT('',#255779); +#255779 = CARTESIAN_POINT('',(199.060482,-42.237177,1.585)); +#255780 = LINE('',#255781,#255782); +#255781 = CARTESIAN_POINT('',(199.128998,-42.202919,1.585)); +#255782 = VECTOR('',#255783,1.); +#255783 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#255784 = ORIENTED_EDGE('',*,*,#255785,.T.); +#255785 = EDGE_CURVE('',#255778,#255786,#255788,.T.); +#255786 = VERTEX_POINT('',#255787); +#255787 = CARTESIAN_POINT('',(199.010104,-42.285517,1.585)); +#255788 = LINE('',#255789,#255790); +#255789 = CARTESIAN_POINT('',(199.060482,-42.237177,1.585)); +#255790 = VECTOR('',#255791,1.); +#255791 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#255792 = ORIENTED_EDGE('',*,*,#255793,.T.); +#255793 = EDGE_CURVE('',#255786,#255794,#255796,.T.); +#255794 = VERTEX_POINT('',#255795); +#255795 = CARTESIAN_POINT('',(198.915403,-42.170124,1.585)); +#255796 = CIRCLE('',#255797,7.499996838527E-02); +#255797 = AXIS2_PLACEMENT_3D('',#255798,#255799,#255800); +#255798 = CARTESIAN_POINT('',(198.968436,-42.22315697246,1.585)); +#255799 = DIRECTION('',(0.,0.,-1.)); +#255800 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#255801 = ORIENTED_EDGE('',*,*,#255802,.T.); +#255802 = EDGE_CURVE('',#255794,#255652,#255803,.T.); +#255803 = LINE('',#255804,#255805); +#255804 = CARTESIAN_POINT('',(198.915403,-42.170124,1.585)); +#255805 = VECTOR('',#255806,1.); +#255806 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#255807 = PLANE('',#255808); +#255808 = AXIS2_PLACEMENT_3D('',#255809,#255810,#255811); +#255809 = CARTESIAN_POINT('',(0.,0.,1.585)); +#255810 = DIRECTION('',(0.,0.,1.)); +#255811 = DIRECTION('',(1.,0.,-0.)); +#255812 = SHELL_BASED_SURFACE_MODEL('',(#255813)); +#255813 = OPEN_SHELL('',(#255814)); +#255814 = ADVANCED_FACE('',(#255815,#255931),#256014,.T.); +#255815 = FACE_BOUND('',#255816,.F.); +#255816 = EDGE_LOOP('',(#255817,#255828,#255836,#255844,#255852,#255860, + #255868,#255876,#255884,#255892,#255900,#255908,#255916,#255925)); +#255817 = ORIENTED_EDGE('',*,*,#255818,.T.); +#255818 = EDGE_CURVE('',#255819,#255821,#255823,.T.); +#255819 = VERTEX_POINT('',#255820); +#255820 = CARTESIAN_POINT('',(192.942496,-42.113287,1.585)); +#255821 = VERTEX_POINT('',#255822); +#255822 = CARTESIAN_POINT('',(193.016055,-42.052919,1.585)); +#255823 = CIRCLE('',#255824,7.500074938983E-02); +#255824 = AXIS2_PLACEMENT_3D('',#255825,#255826,#255827); +#255825 = CARTESIAN_POINT('',(193.01605546611,-42.12791974938,1.585)); +#255826 = DIRECTION('',(0.,0.,-1.)); +#255827 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#255828 = ORIENTED_EDGE('',*,*,#255829,.T.); +#255829 = EDGE_CURVE('',#255821,#255830,#255832,.T.); +#255830 = VERTEX_POINT('',#255831); +#255831 = CARTESIAN_POINT('',(193.261555,-42.053648,1.585)); +#255832 = LINE('',#255833,#255834); +#255833 = CARTESIAN_POINT('',(193.016055,-42.052919,1.585)); +#255834 = VECTOR('',#255835,1.); +#255835 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#255836 = ORIENTED_EDGE('',*,*,#255837,.T.); +#255837 = EDGE_CURVE('',#255830,#255838,#255840,.T.); +#255838 = VERTEX_POINT('',#255839); +#255839 = CARTESIAN_POINT('',(193.438675,-42.113178,1.585)); +#255840 = LINE('',#255841,#255842); +#255841 = CARTESIAN_POINT('',(193.261555,-42.053648,1.585)); +#255842 = VECTOR('',#255843,1.); +#255843 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#255844 = ORIENTED_EDGE('',*,*,#255845,.T.); +#255845 = EDGE_CURVE('',#255838,#255846,#255848,.T.); +#255846 = VERTEX_POINT('',#255847); +#255847 = CARTESIAN_POINT('',(193.555364,-42.23094,1.585)); +#255848 = LINE('',#255849,#255850); +#255849 = CARTESIAN_POINT('',(193.438675,-42.113178,1.585)); +#255850 = VECTOR('',#255851,1.); +#255851 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#255852 = ORIENTED_EDGE('',*,*,#255853,.T.); +#255853 = EDGE_CURVE('',#255846,#255854,#255856,.T.); +#255854 = VERTEX_POINT('',#255855); +#255855 = CARTESIAN_POINT('',(193.612625,-42.347824,1.585)); +#255856 = LINE('',#255857,#255858); +#255857 = CARTESIAN_POINT('',(193.555364,-42.23094,1.585)); +#255858 = VECTOR('',#255859,1.); +#255859 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#255860 = ORIENTED_EDGE('',*,*,#255861,.T.); +#255861 = EDGE_CURVE('',#255854,#255862,#255864,.T.); +#255862 = VERTEX_POINT('',#255863); +#255863 = CARTESIAN_POINT('',(193.662483,-42.55649,1.585)); +#255864 = LINE('',#255865,#255866); +#255865 = CARTESIAN_POINT('',(193.612625,-42.347824,1.585)); +#255866 = VECTOR('',#255867,1.); +#255867 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#255868 = ORIENTED_EDGE('',*,*,#255869,.T.); +#255869 = EDGE_CURVE('',#255862,#255870,#255872,.T.); +#255870 = VERTEX_POINT('',#255871); +#255871 = CARTESIAN_POINT('',(193.660244,-42.717537,1.585)); +#255872 = LINE('',#255873,#255874); +#255873 = CARTESIAN_POINT('',(193.662483,-42.55649,1.585)); +#255874 = VECTOR('',#255875,1.); +#255875 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#255876 = ORIENTED_EDGE('',*,*,#255877,.T.); +#255877 = EDGE_CURVE('',#255870,#255878,#255880,.T.); +#255878 = VERTEX_POINT('',#255879); +#255879 = CARTESIAN_POINT('',(193.606946,-42.923364,1.585)); +#255880 = LINE('',#255881,#255882); +#255881 = CARTESIAN_POINT('',(193.660244,-42.717537,1.585)); +#255882 = VECTOR('',#255883,1.); +#255883 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#255884 = ORIENTED_EDGE('',*,*,#255885,.T.); +#255885 = EDGE_CURVE('',#255878,#255886,#255888,.T.); +#255886 = VERTEX_POINT('',#255887); +#255887 = CARTESIAN_POINT('',(193.549996,-43.032344,1.585)); +#255888 = LINE('',#255889,#255890); +#255889 = CARTESIAN_POINT('',(193.606946,-42.923364,1.585)); +#255890 = VECTOR('',#255891,1.); +#255891 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#255892 = ORIENTED_EDGE('',*,*,#255893,.T.); +#255893 = EDGE_CURVE('',#255886,#255894,#255896,.T.); +#255894 = VERTEX_POINT('',#255895); +#255895 = CARTESIAN_POINT('',(193.434149,-43.145457,1.585)); +#255896 = LINE('',#255897,#255898); +#255897 = CARTESIAN_POINT('',(193.549996,-43.032344,1.585)); +#255898 = VECTOR('',#255899,1.); +#255899 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#255900 = ORIENTED_EDGE('',*,*,#255901,.T.); +#255901 = EDGE_CURVE('',#255894,#255902,#255904,.T.); +#255902 = VERTEX_POINT('',#255903); +#255903 = CARTESIAN_POINT('',(193.261555,-43.202189,1.585)); +#255904 = LINE('',#255905,#255906); +#255905 = CARTESIAN_POINT('',(193.434149,-43.145457,1.585)); +#255906 = VECTOR('',#255907,1.); +#255907 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#255908 = ORIENTED_EDGE('',*,*,#255909,.T.); +#255909 = EDGE_CURVE('',#255902,#255910,#255912,.T.); +#255910 = VERTEX_POINT('',#255911); +#255911 = CARTESIAN_POINT('',(193.001423,-43.201478,1.585)); +#255912 = LINE('',#255913,#255914); +#255913 = CARTESIAN_POINT('',(193.261555,-43.202189,1.585)); +#255914 = VECTOR('',#255915,1.); +#255915 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#255916 = ORIENTED_EDGE('',*,*,#255917,.T.); +#255917 = EDGE_CURVE('',#255910,#255918,#255920,.T.); +#255918 = VERTEX_POINT('',#255919); +#255919 = CARTESIAN_POINT('',(192.941055,-43.127919,1.585)); +#255920 = CIRCLE('',#255921,7.500074938991E-02); +#255921 = AXIS2_PLACEMENT_3D('',#255922,#255923,#255924); +#255922 = CARTESIAN_POINT('',(193.01605574938,-43.12791853389,1.585)); +#255923 = DIRECTION('',(0.,0.,-1.)); +#255924 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#255925 = ORIENTED_EDGE('',*,*,#255926,.T.); +#255926 = EDGE_CURVE('',#255918,#255819,#255927,.T.); +#255927 = LINE('',#255928,#255929); +#255928 = CARTESIAN_POINT('',(192.941055,-43.127919,1.585)); +#255929 = VECTOR('',#255930,1.); +#255930 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#255931 = FACE_BOUND('',#255932,.F.); +#255932 = EDGE_LOOP('',(#255933,#255943,#255951,#255959,#255967,#255975, + #255983,#255992,#256000,#256008)); +#255933 = ORIENTED_EDGE('',*,*,#255934,.T.); +#255934 = EDGE_CURVE('',#255935,#255937,#255939,.T.); +#255935 = VERTEX_POINT('',#255936); +#255936 = CARTESIAN_POINT('',(193.356493,-42.24109,1.585)); +#255937 = VERTEX_POINT('',#255938); +#255938 = CARTESIAN_POINT('',(193.24198,-42.202919,1.585)); +#255939 = LINE('',#255940,#255941); +#255940 = CARTESIAN_POINT('',(193.356493,-42.24109,1.585)); +#255941 = VECTOR('',#255942,1.); +#255942 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#255943 = ORIENTED_EDGE('',*,*,#255944,.T.); +#255944 = EDGE_CURVE('',#255937,#255945,#255947,.T.); +#255945 = VERTEX_POINT('',#255946); +#255946 = CARTESIAN_POINT('',(193.091055,-42.202919,1.585)); +#255947 = LINE('',#255948,#255949); +#255948 = CARTESIAN_POINT('',(193.24198,-42.202919,1.585)); +#255949 = VECTOR('',#255950,1.); +#255950 = DIRECTION('',(-1.,0.,0.)); +#255951 = ORIENTED_EDGE('',*,*,#255952,.T.); +#255952 = EDGE_CURVE('',#255945,#255953,#255955,.T.); +#255953 = VERTEX_POINT('',#255954); +#255954 = CARTESIAN_POINT('',(193.091055,-43.052919,1.585)); +#255955 = LINE('',#255956,#255957); +#255956 = CARTESIAN_POINT('',(193.091055,-42.202919,1.585)); +#255957 = VECTOR('',#255958,1.); +#255958 = DIRECTION('',(0.,-1.,0.)); +#255959 = ORIENTED_EDGE('',*,*,#255960,.T.); +#255960 = EDGE_CURVE('',#255953,#255961,#255963,.T.); +#255961 = VERTEX_POINT('',#255962); +#255962 = CARTESIAN_POINT('',(193.24198,-43.052919,1.585)); +#255963 = LINE('',#255964,#255965); +#255964 = CARTESIAN_POINT('',(193.091055,-43.052919,1.585)); +#255965 = VECTOR('',#255966,1.); +#255966 = DIRECTION('',(1.,0.,0.)); +#255967 = ORIENTED_EDGE('',*,*,#255968,.T.); +#255968 = EDGE_CURVE('',#255961,#255969,#255971,.T.); +#255969 = VERTEX_POINT('',#255970); +#255970 = CARTESIAN_POINT('',(193.356493,-43.014747,1.585)); +#255971 = LINE('',#255972,#255973); +#255972 = CARTESIAN_POINT('',(193.24198,-43.052919,1.585)); +#255973 = VECTOR('',#255974,1.); +#255974 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#255975 = ORIENTED_EDGE('',*,*,#255976,.T.); +#255976 = EDGE_CURVE('',#255969,#255977,#255979,.T.); +#255977 = VERTEX_POINT('',#255978); +#255978 = CARTESIAN_POINT('',(193.430605,-42.940634,1.585)); +#255979 = LINE('',#255980,#255981); +#255980 = CARTESIAN_POINT('',(193.356493,-43.014747,1.585)); +#255981 = VECTOR('',#255982,1.); +#255982 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#255983 = ORIENTED_EDGE('',*,*,#255984,.T.); +#255984 = EDGE_CURVE('',#255977,#255985,#255987,.T.); +#255985 = VERTEX_POINT('',#255986); +#255986 = CARTESIAN_POINT('',(193.512483,-42.565724,1.585)); +#255987 = CIRCLE('',#255988,0.611719141131); +#255988 = AXIS2_PLACEMENT_3D('',#255989,#255990,#255991); +#255989 = CARTESIAN_POINT('',(192.90407096224,-42.62924643649,1.585)); +#255990 = DIRECTION('',(0.,0.,1.)); +#255991 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#255992 = ORIENTED_EDGE('',*,*,#255993,.T.); +#255993 = EDGE_CURVE('',#255985,#255994,#255996,.T.); +#255994 = VERTEX_POINT('',#255995); +#255995 = CARTESIAN_POINT('',(193.469099,-42.39219,1.585)); +#255996 = LINE('',#255997,#255998); +#255997 = CARTESIAN_POINT('',(193.512483,-42.565724,1.585)); +#255998 = VECTOR('',#255999,1.); +#255999 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256000 = ORIENTED_EDGE('',*,*,#256001,.T.); +#256001 = EDGE_CURVE('',#255994,#256002,#256004,.T.); +#256002 = VERTEX_POINT('',#256003); +#256003 = CARTESIAN_POINT('',(193.430606,-42.315203,1.585)); +#256004 = LINE('',#256005,#256006); +#256005 = CARTESIAN_POINT('',(193.469099,-42.39219,1.585)); +#256006 = VECTOR('',#256007,1.); +#256007 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256008 = ORIENTED_EDGE('',*,*,#256009,.T.); +#256009 = EDGE_CURVE('',#256002,#255935,#256010,.T.); +#256010 = LINE('',#256011,#256012); +#256011 = CARTESIAN_POINT('',(193.430606,-42.315203,1.585)); +#256012 = VECTOR('',#256013,1.); +#256013 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256014 = PLANE('',#256015); +#256015 = AXIS2_PLACEMENT_3D('',#256016,#256017,#256018); +#256016 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256017 = DIRECTION('',(0.,0.,1.)); +#256018 = DIRECTION('',(1.,0.,-0.)); +#256019 = SHELL_BASED_SURFACE_MODEL('',(#256020)); +#256020 = OPEN_SHELL('',(#256021)); +#256021 = ADVANCED_FACE('',(#256022,#256138),#256221,.T.); +#256022 = FACE_BOUND('',#256023,.F.); +#256023 = EDGE_LOOP('',(#256024,#256035,#256043,#256051,#256059,#256067, + #256075,#256083,#256091,#256099,#256107,#256115,#256123,#256132)); +#256024 = ORIENTED_EDGE('',*,*,#256025,.T.); +#256025 = EDGE_CURVE('',#256026,#256028,#256030,.T.); +#256026 = VERTEX_POINT('',#256027); +#256027 = CARTESIAN_POINT('',(196.942496,-42.113287,1.585)); +#256028 = VERTEX_POINT('',#256029); +#256029 = CARTESIAN_POINT('',(197.016055,-42.052919,1.585)); +#256030 = CIRCLE('',#256031,7.500074938983E-02); +#256031 = AXIS2_PLACEMENT_3D('',#256032,#256033,#256034); +#256032 = CARTESIAN_POINT('',(197.01605546611,-42.12791974938,1.585)); +#256033 = DIRECTION('',(0.,0.,-1.)); +#256034 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256035 = ORIENTED_EDGE('',*,*,#256036,.T.); +#256036 = EDGE_CURVE('',#256028,#256037,#256039,.T.); +#256037 = VERTEX_POINT('',#256038); +#256038 = CARTESIAN_POINT('',(197.261555,-42.053648,1.585)); +#256039 = LINE('',#256040,#256041); +#256040 = CARTESIAN_POINT('',(197.016055,-42.052919,1.585)); +#256041 = VECTOR('',#256042,1.); +#256042 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#256043 = ORIENTED_EDGE('',*,*,#256044,.T.); +#256044 = EDGE_CURVE('',#256037,#256045,#256047,.T.); +#256045 = VERTEX_POINT('',#256046); +#256046 = CARTESIAN_POINT('',(197.438675,-42.113178,1.585)); +#256047 = LINE('',#256048,#256049); +#256048 = CARTESIAN_POINT('',(197.261555,-42.053648,1.585)); +#256049 = VECTOR('',#256050,1.); +#256050 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#256051 = ORIENTED_EDGE('',*,*,#256052,.T.); +#256052 = EDGE_CURVE('',#256045,#256053,#256055,.T.); +#256053 = VERTEX_POINT('',#256054); +#256054 = CARTESIAN_POINT('',(197.555364,-42.23094,1.585)); +#256055 = LINE('',#256056,#256057); +#256056 = CARTESIAN_POINT('',(197.438675,-42.113178,1.585)); +#256057 = VECTOR('',#256058,1.); +#256058 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#256059 = ORIENTED_EDGE('',*,*,#256060,.T.); +#256060 = EDGE_CURVE('',#256053,#256061,#256063,.T.); +#256061 = VERTEX_POINT('',#256062); +#256062 = CARTESIAN_POINT('',(197.612625,-42.347824,1.585)); +#256063 = LINE('',#256064,#256065); +#256064 = CARTESIAN_POINT('',(197.555364,-42.23094,1.585)); +#256065 = VECTOR('',#256066,1.); +#256066 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#256067 = ORIENTED_EDGE('',*,*,#256068,.T.); +#256068 = EDGE_CURVE('',#256061,#256069,#256071,.T.); +#256069 = VERTEX_POINT('',#256070); +#256070 = CARTESIAN_POINT('',(197.662483,-42.55649,1.585)); +#256071 = LINE('',#256072,#256073); +#256072 = CARTESIAN_POINT('',(197.612625,-42.347824,1.585)); +#256073 = VECTOR('',#256074,1.); +#256074 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#256075 = ORIENTED_EDGE('',*,*,#256076,.T.); +#256076 = EDGE_CURVE('',#256069,#256077,#256079,.T.); +#256077 = VERTEX_POINT('',#256078); +#256078 = CARTESIAN_POINT('',(197.660244,-42.717537,1.585)); +#256079 = LINE('',#256080,#256081); +#256080 = CARTESIAN_POINT('',(197.662483,-42.55649,1.585)); +#256081 = VECTOR('',#256082,1.); +#256082 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#256083 = ORIENTED_EDGE('',*,*,#256084,.T.); +#256084 = EDGE_CURVE('',#256077,#256085,#256087,.T.); +#256085 = VERTEX_POINT('',#256086); +#256086 = CARTESIAN_POINT('',(197.606946,-42.923364,1.585)); +#256087 = LINE('',#256088,#256089); +#256088 = CARTESIAN_POINT('',(197.660244,-42.717537,1.585)); +#256089 = VECTOR('',#256090,1.); +#256090 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#256091 = ORIENTED_EDGE('',*,*,#256092,.T.); +#256092 = EDGE_CURVE('',#256085,#256093,#256095,.T.); +#256093 = VERTEX_POINT('',#256094); +#256094 = CARTESIAN_POINT('',(197.549996,-43.032344,1.585)); +#256095 = LINE('',#256096,#256097); +#256096 = CARTESIAN_POINT('',(197.606946,-42.923364,1.585)); +#256097 = VECTOR('',#256098,1.); +#256098 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#256099 = ORIENTED_EDGE('',*,*,#256100,.T.); +#256100 = EDGE_CURVE('',#256093,#256101,#256103,.T.); +#256101 = VERTEX_POINT('',#256102); +#256102 = CARTESIAN_POINT('',(197.434149,-43.145457,1.585)); +#256103 = LINE('',#256104,#256105); +#256104 = CARTESIAN_POINT('',(197.549996,-43.032344,1.585)); +#256105 = VECTOR('',#256106,1.); +#256106 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#256107 = ORIENTED_EDGE('',*,*,#256108,.T.); +#256108 = EDGE_CURVE('',#256101,#256109,#256111,.T.); +#256109 = VERTEX_POINT('',#256110); +#256110 = CARTESIAN_POINT('',(197.261555,-43.202189,1.585)); +#256111 = LINE('',#256112,#256113); +#256112 = CARTESIAN_POINT('',(197.434149,-43.145457,1.585)); +#256113 = VECTOR('',#256114,1.); +#256114 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#256115 = ORIENTED_EDGE('',*,*,#256116,.T.); +#256116 = EDGE_CURVE('',#256109,#256117,#256119,.T.); +#256117 = VERTEX_POINT('',#256118); +#256118 = CARTESIAN_POINT('',(197.001423,-43.201478,1.585)); +#256119 = LINE('',#256120,#256121); +#256120 = CARTESIAN_POINT('',(197.261555,-43.202189,1.585)); +#256121 = VECTOR('',#256122,1.); +#256122 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#256123 = ORIENTED_EDGE('',*,*,#256124,.T.); +#256124 = EDGE_CURVE('',#256117,#256125,#256127,.T.); +#256125 = VERTEX_POINT('',#256126); +#256126 = CARTESIAN_POINT('',(196.941055,-43.127919,1.585)); +#256127 = CIRCLE('',#256128,7.500074938991E-02); +#256128 = AXIS2_PLACEMENT_3D('',#256129,#256130,#256131); +#256129 = CARTESIAN_POINT('',(197.01605574938,-43.12791853389,1.585)); +#256130 = DIRECTION('',(0.,0.,-1.)); +#256131 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#256132 = ORIENTED_EDGE('',*,*,#256133,.T.); +#256133 = EDGE_CURVE('',#256125,#256026,#256134,.T.); +#256134 = LINE('',#256135,#256136); +#256135 = CARTESIAN_POINT('',(196.941055,-43.127919,1.585)); +#256136 = VECTOR('',#256137,1.); +#256137 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256138 = FACE_BOUND('',#256139,.F.); +#256139 = EDGE_LOOP('',(#256140,#256150,#256158,#256166,#256174,#256182, + #256190,#256199,#256207,#256215)); +#256140 = ORIENTED_EDGE('',*,*,#256141,.T.); +#256141 = EDGE_CURVE('',#256142,#256144,#256146,.T.); +#256142 = VERTEX_POINT('',#256143); +#256143 = CARTESIAN_POINT('',(197.356493,-42.24109,1.585)); +#256144 = VERTEX_POINT('',#256145); +#256145 = CARTESIAN_POINT('',(197.24198,-42.202919,1.585)); +#256146 = LINE('',#256147,#256148); +#256147 = CARTESIAN_POINT('',(197.356493,-42.24109,1.585)); +#256148 = VECTOR('',#256149,1.); +#256149 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#256150 = ORIENTED_EDGE('',*,*,#256151,.T.); +#256151 = EDGE_CURVE('',#256144,#256152,#256154,.T.); +#256152 = VERTEX_POINT('',#256153); +#256153 = CARTESIAN_POINT('',(197.091055,-42.202919,1.585)); +#256154 = LINE('',#256155,#256156); +#256155 = CARTESIAN_POINT('',(197.24198,-42.202919,1.585)); +#256156 = VECTOR('',#256157,1.); +#256157 = DIRECTION('',(-1.,0.,0.)); +#256158 = ORIENTED_EDGE('',*,*,#256159,.T.); +#256159 = EDGE_CURVE('',#256152,#256160,#256162,.T.); +#256160 = VERTEX_POINT('',#256161); +#256161 = CARTESIAN_POINT('',(197.091055,-43.052919,1.585)); +#256162 = LINE('',#256163,#256164); +#256163 = CARTESIAN_POINT('',(197.091055,-42.202919,1.585)); +#256164 = VECTOR('',#256165,1.); +#256165 = DIRECTION('',(0.,-1.,0.)); +#256166 = ORIENTED_EDGE('',*,*,#256167,.T.); +#256167 = EDGE_CURVE('',#256160,#256168,#256170,.T.); +#256168 = VERTEX_POINT('',#256169); +#256169 = CARTESIAN_POINT('',(197.24198,-43.052919,1.585)); +#256170 = LINE('',#256171,#256172); +#256171 = CARTESIAN_POINT('',(197.091055,-43.052919,1.585)); +#256172 = VECTOR('',#256173,1.); +#256173 = DIRECTION('',(1.,0.,0.)); +#256174 = ORIENTED_EDGE('',*,*,#256175,.T.); +#256175 = EDGE_CURVE('',#256168,#256176,#256178,.T.); +#256176 = VERTEX_POINT('',#256177); +#256177 = CARTESIAN_POINT('',(197.356493,-43.014747,1.585)); +#256178 = LINE('',#256179,#256180); +#256179 = CARTESIAN_POINT('',(197.24198,-43.052919,1.585)); +#256180 = VECTOR('',#256181,1.); +#256181 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#256182 = ORIENTED_EDGE('',*,*,#256183,.T.); +#256183 = EDGE_CURVE('',#256176,#256184,#256186,.T.); +#256184 = VERTEX_POINT('',#256185); +#256185 = CARTESIAN_POINT('',(197.430605,-42.940634,1.585)); +#256186 = LINE('',#256187,#256188); +#256187 = CARTESIAN_POINT('',(197.356493,-43.014747,1.585)); +#256188 = VECTOR('',#256189,1.); +#256189 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#256190 = ORIENTED_EDGE('',*,*,#256191,.T.); +#256191 = EDGE_CURVE('',#256184,#256192,#256194,.T.); +#256192 = VERTEX_POINT('',#256193); +#256193 = CARTESIAN_POINT('',(197.512483,-42.565724,1.585)); +#256194 = CIRCLE('',#256195,0.611719141131); +#256195 = AXIS2_PLACEMENT_3D('',#256196,#256197,#256198); +#256196 = CARTESIAN_POINT('',(196.90407096224,-42.62924643649,1.585)); +#256197 = DIRECTION('',(0.,0.,1.)); +#256198 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#256199 = ORIENTED_EDGE('',*,*,#256200,.T.); +#256200 = EDGE_CURVE('',#256192,#256201,#256203,.T.); +#256201 = VERTEX_POINT('',#256202); +#256202 = CARTESIAN_POINT('',(197.469099,-42.39219,1.585)); +#256203 = LINE('',#256204,#256205); +#256204 = CARTESIAN_POINT('',(197.512483,-42.565724,1.585)); +#256205 = VECTOR('',#256206,1.); +#256206 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256207 = ORIENTED_EDGE('',*,*,#256208,.T.); +#256208 = EDGE_CURVE('',#256201,#256209,#256211,.T.); +#256209 = VERTEX_POINT('',#256210); +#256210 = CARTESIAN_POINT('',(197.430606,-42.315203,1.585)); +#256211 = LINE('',#256212,#256213); +#256212 = CARTESIAN_POINT('',(197.469099,-42.39219,1.585)); +#256213 = VECTOR('',#256214,1.); +#256214 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256215 = ORIENTED_EDGE('',*,*,#256216,.T.); +#256216 = EDGE_CURVE('',#256209,#256142,#256217,.T.); +#256217 = LINE('',#256218,#256219); +#256218 = CARTESIAN_POINT('',(197.430606,-42.315203,1.585)); +#256219 = VECTOR('',#256220,1.); +#256220 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256221 = PLANE('',#256222); +#256222 = AXIS2_PLACEMENT_3D('',#256223,#256224,#256225); +#256223 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256224 = DIRECTION('',(0.,0.,1.)); +#256225 = DIRECTION('',(1.,0.,-0.)); +#256226 = SHELL_BASED_SURFACE_MODEL('',(#256227)); +#256227 = OPEN_SHELL('',(#256228)); +#256228 = ADVANCED_FACE('',(#256229,#256345),#256428,.T.); +#256229 = FACE_BOUND('',#256230,.F.); +#256230 = EDGE_LOOP('',(#256231,#256242,#256250,#256258,#256266,#256274, + #256282,#256290,#256298,#256306,#256314,#256322,#256330,#256339)); +#256231 = ORIENTED_EDGE('',*,*,#256232,.T.); +#256232 = EDGE_CURVE('',#256233,#256235,#256237,.T.); +#256233 = VERTEX_POINT('',#256234); +#256234 = CARTESIAN_POINT('',(200.942496,-42.113287,1.585)); +#256235 = VERTEX_POINT('',#256236); +#256236 = CARTESIAN_POINT('',(201.016055,-42.052919,1.585)); +#256237 = CIRCLE('',#256238,7.500074938983E-02); +#256238 = AXIS2_PLACEMENT_3D('',#256239,#256240,#256241); +#256239 = CARTESIAN_POINT('',(201.01605546611,-42.12791974938,1.585)); +#256240 = DIRECTION('',(0.,0.,-1.)); +#256241 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256242 = ORIENTED_EDGE('',*,*,#256243,.T.); +#256243 = EDGE_CURVE('',#256235,#256244,#256246,.T.); +#256244 = VERTEX_POINT('',#256245); +#256245 = CARTESIAN_POINT('',(201.261555,-42.053648,1.585)); +#256246 = LINE('',#256247,#256248); +#256247 = CARTESIAN_POINT('',(201.016055,-42.052919,1.585)); +#256248 = VECTOR('',#256249,1.); +#256249 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#256250 = ORIENTED_EDGE('',*,*,#256251,.T.); +#256251 = EDGE_CURVE('',#256244,#256252,#256254,.T.); +#256252 = VERTEX_POINT('',#256253); +#256253 = CARTESIAN_POINT('',(201.438675,-42.113178,1.585)); +#256254 = LINE('',#256255,#256256); +#256255 = CARTESIAN_POINT('',(201.261555,-42.053648,1.585)); +#256256 = VECTOR('',#256257,1.); +#256257 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#256258 = ORIENTED_EDGE('',*,*,#256259,.T.); +#256259 = EDGE_CURVE('',#256252,#256260,#256262,.T.); +#256260 = VERTEX_POINT('',#256261); +#256261 = CARTESIAN_POINT('',(201.555364,-42.23094,1.585)); +#256262 = LINE('',#256263,#256264); +#256263 = CARTESIAN_POINT('',(201.438675,-42.113178,1.585)); +#256264 = VECTOR('',#256265,1.); +#256265 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#256266 = ORIENTED_EDGE('',*,*,#256267,.T.); +#256267 = EDGE_CURVE('',#256260,#256268,#256270,.T.); +#256268 = VERTEX_POINT('',#256269); +#256269 = CARTESIAN_POINT('',(201.612625,-42.347824,1.585)); +#256270 = LINE('',#256271,#256272); +#256271 = CARTESIAN_POINT('',(201.555364,-42.23094,1.585)); +#256272 = VECTOR('',#256273,1.); +#256273 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#256274 = ORIENTED_EDGE('',*,*,#256275,.T.); +#256275 = EDGE_CURVE('',#256268,#256276,#256278,.T.); +#256276 = VERTEX_POINT('',#256277); +#256277 = CARTESIAN_POINT('',(201.662483,-42.55649,1.585)); +#256278 = LINE('',#256279,#256280); +#256279 = CARTESIAN_POINT('',(201.612625,-42.347824,1.585)); +#256280 = VECTOR('',#256281,1.); +#256281 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#256282 = ORIENTED_EDGE('',*,*,#256283,.T.); +#256283 = EDGE_CURVE('',#256276,#256284,#256286,.T.); +#256284 = VERTEX_POINT('',#256285); +#256285 = CARTESIAN_POINT('',(201.660244,-42.717537,1.585)); +#256286 = LINE('',#256287,#256288); +#256287 = CARTESIAN_POINT('',(201.662483,-42.55649,1.585)); +#256288 = VECTOR('',#256289,1.); +#256289 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#256290 = ORIENTED_EDGE('',*,*,#256291,.T.); +#256291 = EDGE_CURVE('',#256284,#256292,#256294,.T.); +#256292 = VERTEX_POINT('',#256293); +#256293 = CARTESIAN_POINT('',(201.606946,-42.923364,1.585)); +#256294 = LINE('',#256295,#256296); +#256295 = CARTESIAN_POINT('',(201.660244,-42.717537,1.585)); +#256296 = VECTOR('',#256297,1.); +#256297 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#256298 = ORIENTED_EDGE('',*,*,#256299,.T.); +#256299 = EDGE_CURVE('',#256292,#256300,#256302,.T.); +#256300 = VERTEX_POINT('',#256301); +#256301 = CARTESIAN_POINT('',(201.549996,-43.032344,1.585)); +#256302 = LINE('',#256303,#256304); +#256303 = CARTESIAN_POINT('',(201.606946,-42.923364,1.585)); +#256304 = VECTOR('',#256305,1.); +#256305 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#256306 = ORIENTED_EDGE('',*,*,#256307,.T.); +#256307 = EDGE_CURVE('',#256300,#256308,#256310,.T.); +#256308 = VERTEX_POINT('',#256309); +#256309 = CARTESIAN_POINT('',(201.434149,-43.145457,1.585)); +#256310 = LINE('',#256311,#256312); +#256311 = CARTESIAN_POINT('',(201.549996,-43.032344,1.585)); +#256312 = VECTOR('',#256313,1.); +#256313 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#256314 = ORIENTED_EDGE('',*,*,#256315,.T.); +#256315 = EDGE_CURVE('',#256308,#256316,#256318,.T.); +#256316 = VERTEX_POINT('',#256317); +#256317 = CARTESIAN_POINT('',(201.261555,-43.202189,1.585)); +#256318 = LINE('',#256319,#256320); +#256319 = CARTESIAN_POINT('',(201.434149,-43.145457,1.585)); +#256320 = VECTOR('',#256321,1.); +#256321 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#256322 = ORIENTED_EDGE('',*,*,#256323,.T.); +#256323 = EDGE_CURVE('',#256316,#256324,#256326,.T.); +#256324 = VERTEX_POINT('',#256325); +#256325 = CARTESIAN_POINT('',(201.001423,-43.201478,1.585)); +#256326 = LINE('',#256327,#256328); +#256327 = CARTESIAN_POINT('',(201.261555,-43.202189,1.585)); +#256328 = VECTOR('',#256329,1.); +#256329 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#256330 = ORIENTED_EDGE('',*,*,#256331,.T.); +#256331 = EDGE_CURVE('',#256324,#256332,#256334,.T.); +#256332 = VERTEX_POINT('',#256333); +#256333 = CARTESIAN_POINT('',(200.941055,-43.127919,1.585)); +#256334 = CIRCLE('',#256335,7.500074938991E-02); +#256335 = AXIS2_PLACEMENT_3D('',#256336,#256337,#256338); +#256336 = CARTESIAN_POINT('',(201.01605574938,-43.12791853389,1.585)); +#256337 = DIRECTION('',(0.,0.,-1.)); +#256338 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#256339 = ORIENTED_EDGE('',*,*,#256340,.T.); +#256340 = EDGE_CURVE('',#256332,#256233,#256341,.T.); +#256341 = LINE('',#256342,#256343); +#256342 = CARTESIAN_POINT('',(200.941055,-43.127919,1.585)); +#256343 = VECTOR('',#256344,1.); +#256344 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256345 = FACE_BOUND('',#256346,.F.); +#256346 = EDGE_LOOP('',(#256347,#256357,#256365,#256373,#256381,#256389, + #256397,#256406,#256414,#256422)); +#256347 = ORIENTED_EDGE('',*,*,#256348,.T.); +#256348 = EDGE_CURVE('',#256349,#256351,#256353,.T.); +#256349 = VERTEX_POINT('',#256350); +#256350 = CARTESIAN_POINT('',(201.356493,-42.24109,1.585)); +#256351 = VERTEX_POINT('',#256352); +#256352 = CARTESIAN_POINT('',(201.24198,-42.202919,1.585)); +#256353 = LINE('',#256354,#256355); +#256354 = CARTESIAN_POINT('',(201.356493,-42.24109,1.585)); +#256355 = VECTOR('',#256356,1.); +#256356 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#256357 = ORIENTED_EDGE('',*,*,#256358,.T.); +#256358 = EDGE_CURVE('',#256351,#256359,#256361,.T.); +#256359 = VERTEX_POINT('',#256360); +#256360 = CARTESIAN_POINT('',(201.091055,-42.202919,1.585)); +#256361 = LINE('',#256362,#256363); +#256362 = CARTESIAN_POINT('',(201.24198,-42.202919,1.585)); +#256363 = VECTOR('',#256364,1.); +#256364 = DIRECTION('',(-1.,0.,0.)); +#256365 = ORIENTED_EDGE('',*,*,#256366,.T.); +#256366 = EDGE_CURVE('',#256359,#256367,#256369,.T.); +#256367 = VERTEX_POINT('',#256368); +#256368 = CARTESIAN_POINT('',(201.091055,-43.052919,1.585)); +#256369 = LINE('',#256370,#256371); +#256370 = CARTESIAN_POINT('',(201.091055,-42.202919,1.585)); +#256371 = VECTOR('',#256372,1.); +#256372 = DIRECTION('',(0.,-1.,0.)); +#256373 = ORIENTED_EDGE('',*,*,#256374,.T.); +#256374 = EDGE_CURVE('',#256367,#256375,#256377,.T.); +#256375 = VERTEX_POINT('',#256376); +#256376 = CARTESIAN_POINT('',(201.24198,-43.052919,1.585)); +#256377 = LINE('',#256378,#256379); +#256378 = CARTESIAN_POINT('',(201.091055,-43.052919,1.585)); +#256379 = VECTOR('',#256380,1.); +#256380 = DIRECTION('',(1.,0.,0.)); +#256381 = ORIENTED_EDGE('',*,*,#256382,.T.); +#256382 = EDGE_CURVE('',#256375,#256383,#256385,.T.); +#256383 = VERTEX_POINT('',#256384); +#256384 = CARTESIAN_POINT('',(201.356493,-43.014747,1.585)); +#256385 = LINE('',#256386,#256387); +#256386 = CARTESIAN_POINT('',(201.24198,-43.052919,1.585)); +#256387 = VECTOR('',#256388,1.); +#256388 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#256389 = ORIENTED_EDGE('',*,*,#256390,.T.); +#256390 = EDGE_CURVE('',#256383,#256391,#256393,.T.); +#256391 = VERTEX_POINT('',#256392); +#256392 = CARTESIAN_POINT('',(201.430605,-42.940634,1.585)); +#256393 = LINE('',#256394,#256395); +#256394 = CARTESIAN_POINT('',(201.356493,-43.014747,1.585)); +#256395 = VECTOR('',#256396,1.); +#256396 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#256397 = ORIENTED_EDGE('',*,*,#256398,.T.); +#256398 = EDGE_CURVE('',#256391,#256399,#256401,.T.); +#256399 = VERTEX_POINT('',#256400); +#256400 = CARTESIAN_POINT('',(201.512483,-42.565724,1.585)); +#256401 = CIRCLE('',#256402,0.611719141131); +#256402 = AXIS2_PLACEMENT_3D('',#256403,#256404,#256405); +#256403 = CARTESIAN_POINT('',(200.90407096224,-42.62924643649,1.585)); +#256404 = DIRECTION('',(0.,0.,1.)); +#256405 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#256406 = ORIENTED_EDGE('',*,*,#256407,.T.); +#256407 = EDGE_CURVE('',#256399,#256408,#256410,.T.); +#256408 = VERTEX_POINT('',#256409); +#256409 = CARTESIAN_POINT('',(201.469099,-42.39219,1.585)); +#256410 = LINE('',#256411,#256412); +#256411 = CARTESIAN_POINT('',(201.512483,-42.565724,1.585)); +#256412 = VECTOR('',#256413,1.); +#256413 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256414 = ORIENTED_EDGE('',*,*,#256415,.T.); +#256415 = EDGE_CURVE('',#256408,#256416,#256418,.T.); +#256416 = VERTEX_POINT('',#256417); +#256417 = CARTESIAN_POINT('',(201.430606,-42.315203,1.585)); +#256418 = LINE('',#256419,#256420); +#256419 = CARTESIAN_POINT('',(201.469099,-42.39219,1.585)); +#256420 = VECTOR('',#256421,1.); +#256421 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256422 = ORIENTED_EDGE('',*,*,#256423,.T.); +#256423 = EDGE_CURVE('',#256416,#256349,#256424,.T.); +#256424 = LINE('',#256425,#256426); +#256425 = CARTESIAN_POINT('',(201.430606,-42.315203,1.585)); +#256426 = VECTOR('',#256427,1.); +#256427 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256428 = PLANE('',#256429); +#256429 = AXIS2_PLACEMENT_3D('',#256430,#256431,#256432); +#256430 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256431 = DIRECTION('',(0.,0.,1.)); +#256432 = DIRECTION('',(1.,0.,-0.)); +#256433 = SHELL_BASED_SURFACE_MODEL('',(#256434)); +#256434 = OPEN_SHELL('',(#256435)); +#256435 = ADVANCED_FACE('',(#256436,#256552),#256635,.T.); +#256436 = FACE_BOUND('',#256437,.F.); +#256437 = EDGE_LOOP('',(#256438,#256449,#256457,#256465,#256473,#256481, + #256489,#256497,#256505,#256513,#256521,#256529,#256537,#256546)); +#256438 = ORIENTED_EDGE('',*,*,#256439,.T.); +#256439 = EDGE_CURVE('',#256440,#256442,#256444,.T.); +#256440 = VERTEX_POINT('',#256441); +#256441 = CARTESIAN_POINT('',(204.942496,-42.113287,1.585)); +#256442 = VERTEX_POINT('',#256443); +#256443 = CARTESIAN_POINT('',(205.016055,-42.052919,1.585)); +#256444 = CIRCLE('',#256445,7.500074938983E-02); +#256445 = AXIS2_PLACEMENT_3D('',#256446,#256447,#256448); +#256446 = CARTESIAN_POINT('',(205.01605546611,-42.12791974938,1.585)); +#256447 = DIRECTION('',(0.,0.,-1.)); +#256448 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256449 = ORIENTED_EDGE('',*,*,#256450,.T.); +#256450 = EDGE_CURVE('',#256442,#256451,#256453,.T.); +#256451 = VERTEX_POINT('',#256452); +#256452 = CARTESIAN_POINT('',(205.261555,-42.053648,1.585)); +#256453 = LINE('',#256454,#256455); +#256454 = CARTESIAN_POINT('',(205.016055,-42.052919,1.585)); +#256455 = VECTOR('',#256456,1.); +#256456 = DIRECTION('',(0.999995591212,-2.969437010157E-03,0.)); +#256457 = ORIENTED_EDGE('',*,*,#256458,.T.); +#256458 = EDGE_CURVE('',#256451,#256459,#256461,.T.); +#256459 = VERTEX_POINT('',#256460); +#256460 = CARTESIAN_POINT('',(205.438675,-42.113178,1.585)); +#256461 = LINE('',#256462,#256463); +#256462 = CARTESIAN_POINT('',(205.261555,-42.053648,1.585)); +#256463 = VECTOR('',#256464,1.); +#256464 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#256465 = ORIENTED_EDGE('',*,*,#256466,.T.); +#256466 = EDGE_CURVE('',#256459,#256467,#256469,.T.); +#256467 = VERTEX_POINT('',#256468); +#256468 = CARTESIAN_POINT('',(205.555364,-42.23094,1.585)); +#256469 = LINE('',#256470,#256471); +#256470 = CARTESIAN_POINT('',(205.438675,-42.113178,1.585)); +#256471 = VECTOR('',#256472,1.); +#256472 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#256473 = ORIENTED_EDGE('',*,*,#256474,.T.); +#256474 = EDGE_CURVE('',#256467,#256475,#256477,.T.); +#256475 = VERTEX_POINT('',#256476); +#256476 = CARTESIAN_POINT('',(205.612625,-42.347824,1.585)); +#256477 = LINE('',#256478,#256479); +#256478 = CARTESIAN_POINT('',(205.555364,-42.23094,1.585)); +#256479 = VECTOR('',#256480,1.); +#256480 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#256481 = ORIENTED_EDGE('',*,*,#256482,.T.); +#256482 = EDGE_CURVE('',#256475,#256483,#256485,.T.); +#256483 = VERTEX_POINT('',#256484); +#256484 = CARTESIAN_POINT('',(205.662483,-42.55649,1.585)); +#256485 = LINE('',#256486,#256487); +#256486 = CARTESIAN_POINT('',(205.612625,-42.347824,1.585)); +#256487 = VECTOR('',#256488,1.); +#256488 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#256489 = ORIENTED_EDGE('',*,*,#256490,.T.); +#256490 = EDGE_CURVE('',#256483,#256491,#256493,.T.); +#256491 = VERTEX_POINT('',#256492); +#256492 = CARTESIAN_POINT('',(205.660244,-42.717537,1.585)); +#256493 = LINE('',#256494,#256495); +#256494 = CARTESIAN_POINT('',(205.662483,-42.55649,1.585)); +#256495 = VECTOR('',#256496,1.); +#256496 = DIRECTION('',(-1.390143030568E-02,-0.999903370449,0.)); +#256497 = ORIENTED_EDGE('',*,*,#256498,.T.); +#256498 = EDGE_CURVE('',#256491,#256499,#256501,.T.); +#256499 = VERTEX_POINT('',#256500); +#256500 = CARTESIAN_POINT('',(205.606946,-42.923364,1.585)); +#256501 = LINE('',#256502,#256503); +#256502 = CARTESIAN_POINT('',(205.660244,-42.717537,1.585)); +#256503 = VECTOR('',#256504,1.); +#256504 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#256505 = ORIENTED_EDGE('',*,*,#256506,.T.); +#256506 = EDGE_CURVE('',#256499,#256507,#256509,.T.); +#256507 = VERTEX_POINT('',#256508); +#256508 = CARTESIAN_POINT('',(205.549996,-43.032344,1.585)); +#256509 = LINE('',#256510,#256511); +#256510 = CARTESIAN_POINT('',(205.606946,-42.923364,1.585)); +#256511 = VECTOR('',#256512,1.); +#256512 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#256513 = ORIENTED_EDGE('',*,*,#256514,.T.); +#256514 = EDGE_CURVE('',#256507,#256515,#256517,.T.); +#256515 = VERTEX_POINT('',#256516); +#256516 = CARTESIAN_POINT('',(205.434149,-43.145457,1.585)); +#256517 = LINE('',#256518,#256519); +#256518 = CARTESIAN_POINT('',(205.549996,-43.032344,1.585)); +#256519 = VECTOR('',#256520,1.); +#256520 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#256521 = ORIENTED_EDGE('',*,*,#256522,.T.); +#256522 = EDGE_CURVE('',#256515,#256523,#256525,.T.); +#256523 = VERTEX_POINT('',#256524); +#256524 = CARTESIAN_POINT('',(205.261555,-43.202189,1.585)); +#256525 = LINE('',#256526,#256527); +#256526 = CARTESIAN_POINT('',(205.434149,-43.145457,1.585)); +#256527 = VECTOR('',#256528,1.); +#256528 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#256529 = ORIENTED_EDGE('',*,*,#256530,.T.); +#256530 = EDGE_CURVE('',#256523,#256531,#256533,.T.); +#256531 = VERTEX_POINT('',#256532); +#256532 = CARTESIAN_POINT('',(205.001423,-43.201478,1.585)); +#256533 = LINE('',#256534,#256535); +#256534 = CARTESIAN_POINT('',(205.261555,-43.202189,1.585)); +#256535 = VECTOR('',#256536,1.); +#256536 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#256537 = ORIENTED_EDGE('',*,*,#256538,.T.); +#256538 = EDGE_CURVE('',#256531,#256539,#256541,.T.); +#256539 = VERTEX_POINT('',#256540); +#256540 = CARTESIAN_POINT('',(204.941055,-43.127919,1.585)); +#256541 = CIRCLE('',#256542,7.500074938991E-02); +#256542 = AXIS2_PLACEMENT_3D('',#256543,#256544,#256545); +#256543 = CARTESIAN_POINT('',(205.01605574938,-43.12791853389,1.585)); +#256544 = DIRECTION('',(0.,0.,-1.)); +#256545 = DIRECTION('',(-0.195101375753,-0.980783081613,-0.)); +#256546 = ORIENTED_EDGE('',*,*,#256547,.T.); +#256547 = EDGE_CURVE('',#256539,#256440,#256548,.T.); +#256548 = LINE('',#256549,#256550); +#256549 = CARTESIAN_POINT('',(204.941055,-43.127919,1.585)); +#256550 = VECTOR('',#256551,1.); +#256551 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256552 = FACE_BOUND('',#256553,.F.); +#256553 = EDGE_LOOP('',(#256554,#256564,#256572,#256580,#256588,#256596, + #256604,#256613,#256621,#256629)); +#256554 = ORIENTED_EDGE('',*,*,#256555,.T.); +#256555 = EDGE_CURVE('',#256556,#256558,#256560,.T.); +#256556 = VERTEX_POINT('',#256557); +#256557 = CARTESIAN_POINT('',(205.356493,-42.24109,1.585)); +#256558 = VERTEX_POINT('',#256559); +#256559 = CARTESIAN_POINT('',(205.24198,-42.202919,1.585)); +#256560 = LINE('',#256561,#256562); +#256561 = CARTESIAN_POINT('',(205.356493,-42.24109,1.585)); +#256562 = VECTOR('',#256563,1.); +#256563 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#256564 = ORIENTED_EDGE('',*,*,#256565,.T.); +#256565 = EDGE_CURVE('',#256558,#256566,#256568,.T.); +#256566 = VERTEX_POINT('',#256567); +#256567 = CARTESIAN_POINT('',(205.091055,-42.202919,1.585)); +#256568 = LINE('',#256569,#256570); +#256569 = CARTESIAN_POINT('',(205.24198,-42.202919,1.585)); +#256570 = VECTOR('',#256571,1.); +#256571 = DIRECTION('',(-1.,0.,0.)); +#256572 = ORIENTED_EDGE('',*,*,#256573,.T.); +#256573 = EDGE_CURVE('',#256566,#256574,#256576,.T.); +#256574 = VERTEX_POINT('',#256575); +#256575 = CARTESIAN_POINT('',(205.091055,-43.052919,1.585)); +#256576 = LINE('',#256577,#256578); +#256577 = CARTESIAN_POINT('',(205.091055,-42.202919,1.585)); +#256578 = VECTOR('',#256579,1.); +#256579 = DIRECTION('',(0.,-1.,0.)); +#256580 = ORIENTED_EDGE('',*,*,#256581,.T.); +#256581 = EDGE_CURVE('',#256574,#256582,#256584,.T.); +#256582 = VERTEX_POINT('',#256583); +#256583 = CARTESIAN_POINT('',(205.24198,-43.052919,1.585)); +#256584 = LINE('',#256585,#256586); +#256585 = CARTESIAN_POINT('',(205.091055,-43.052919,1.585)); +#256586 = VECTOR('',#256587,1.); +#256587 = DIRECTION('',(1.,0.,0.)); +#256588 = ORIENTED_EDGE('',*,*,#256589,.T.); +#256589 = EDGE_CURVE('',#256582,#256590,#256592,.T.); +#256590 = VERTEX_POINT('',#256591); +#256591 = CARTESIAN_POINT('',(205.356493,-43.014747,1.585)); +#256592 = LINE('',#256593,#256594); +#256593 = CARTESIAN_POINT('',(205.24198,-43.052919,1.585)); +#256594 = VECTOR('',#256595,1.); +#256595 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#256596 = ORIENTED_EDGE('',*,*,#256597,.T.); +#256597 = EDGE_CURVE('',#256590,#256598,#256600,.T.); +#256598 = VERTEX_POINT('',#256599); +#256599 = CARTESIAN_POINT('',(205.430605,-42.940634,1.585)); +#256600 = LINE('',#256601,#256602); +#256601 = CARTESIAN_POINT('',(205.356493,-43.014747,1.585)); +#256602 = VECTOR('',#256603,1.); +#256603 = DIRECTION('',(0.707102010674,0.707111551666,0.)); +#256604 = ORIENTED_EDGE('',*,*,#256605,.T.); +#256605 = EDGE_CURVE('',#256598,#256606,#256608,.T.); +#256606 = VERTEX_POINT('',#256607); +#256607 = CARTESIAN_POINT('',(205.512483,-42.565724,1.585)); +#256608 = CIRCLE('',#256609,0.611719141131); +#256609 = AXIS2_PLACEMENT_3D('',#256610,#256611,#256612); +#256610 = CARTESIAN_POINT('',(204.90407096224,-42.62924643649,1.585)); +#256611 = DIRECTION('',(0.,0.,1.)); +#256612 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#256613 = ORIENTED_EDGE('',*,*,#256614,.T.); +#256614 = EDGE_CURVE('',#256606,#256615,#256617,.T.); +#256615 = VERTEX_POINT('',#256616); +#256616 = CARTESIAN_POINT('',(205.469099,-42.39219,1.585)); +#256617 = LINE('',#256618,#256619); +#256618 = CARTESIAN_POINT('',(205.512483,-42.565724,1.585)); +#256619 = VECTOR('',#256620,1.); +#256620 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#256621 = ORIENTED_EDGE('',*,*,#256622,.T.); +#256622 = EDGE_CURVE('',#256615,#256623,#256625,.T.); +#256623 = VERTEX_POINT('',#256624); +#256624 = CARTESIAN_POINT('',(205.430606,-42.315203,1.585)); +#256625 = LINE('',#256626,#256627); +#256626 = CARTESIAN_POINT('',(205.469099,-42.39219,1.585)); +#256627 = VECTOR('',#256628,1.); +#256628 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#256629 = ORIENTED_EDGE('',*,*,#256630,.T.); +#256630 = EDGE_CURVE('',#256623,#256556,#256631,.T.); +#256631 = LINE('',#256632,#256633); +#256632 = CARTESIAN_POINT('',(205.430606,-42.315203,1.585)); +#256633 = VECTOR('',#256634,1.); +#256634 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256635 = PLANE('',#256636); +#256636 = AXIS2_PLACEMENT_3D('',#256637,#256638,#256639); +#256637 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256638 = DIRECTION('',(0.,0.,1.)); +#256639 = DIRECTION('',(1.,0.,-0.)); +#256640 = SHELL_BASED_SURFACE_MODEL('',(#256641)); +#256641 = OPEN_SHELL('',(#256642)); +#256642 = ADVANCED_FACE('',(#256643,#256761,#256828),#256880,.T.); +#256643 = FACE_BOUND('',#256644,.F.); +#256644 = EDGE_LOOP('',(#256645,#256656,#256664,#256673,#256681,#256689, + #256697,#256705,#256713,#256722,#256730,#256739,#256747,#256755)); +#256645 = ORIENTED_EDGE('',*,*,#256646,.T.); +#256646 = EDGE_CURVE('',#256647,#256649,#256651,.T.); +#256647 = VERTEX_POINT('',#256648); +#256648 = CARTESIAN_POINT('',(193.942496,-42.113287,1.585)); +#256649 = VERTEX_POINT('',#256650); +#256650 = CARTESIAN_POINT('',(194.016055,-42.052919,1.585)); +#256651 = CIRCLE('',#256652,7.500074938983E-02); +#256652 = AXIS2_PLACEMENT_3D('',#256653,#256654,#256655); +#256653 = CARTESIAN_POINT('',(194.01605546611,-42.12791974938,1.585)); +#256654 = DIRECTION('',(0.,0.,-1.)); +#256655 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256656 = ORIENTED_EDGE('',*,*,#256657,.T.); +#256657 = EDGE_CURVE('',#256649,#256658,#256660,.T.); +#256658 = VERTEX_POINT('',#256659); +#256659 = CARTESIAN_POINT('',(194.36402,-42.05436,1.585)); +#256660 = LINE('',#256661,#256662); +#256661 = CARTESIAN_POINT('',(194.016055,-42.052919,1.585)); +#256662 = VECTOR('',#256663,1.); +#256663 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#256664 = ORIENTED_EDGE('',*,*,#256665,.T.); +#256665 = EDGE_CURVE('',#256658,#256666,#256668,.T.); +#256666 = VERTEX_POINT('',#256667); +#256667 = CARTESIAN_POINT('',(194.613423,-42.303763,1.585)); +#256668 = CIRCLE('',#256669,0.347870264855); +#256669 = AXIS2_PLACEMENT_3D('',#256670,#256671,#256672); +#256670 = CARTESIAN_POINT('',(194.27669226502,-42.39109073497,1.585)); +#256671 = DIRECTION('',(0.,0.,-1.)); +#256672 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#256673 = ORIENTED_EDGE('',*,*,#256674,.T.); +#256674 = EDGE_CURVE('',#256666,#256675,#256677,.T.); +#256675 = VERTEX_POINT('',#256676); +#256676 = CARTESIAN_POINT('',(194.612201,-42.433443,1.585)); +#256677 = LINE('',#256678,#256679); +#256678 = CARTESIAN_POINT('',(194.613423,-42.303763,1.585)); +#256679 = VECTOR('',#256680,1.); +#256680 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#256681 = ORIENTED_EDGE('',*,*,#256682,.T.); +#256682 = EDGE_CURVE('',#256675,#256683,#256685,.T.); +#256683 = VERTEX_POINT('',#256684); +#256684 = CARTESIAN_POINT('',(194.549996,-42.556154,1.585)); +#256685 = LINE('',#256686,#256687); +#256686 = CARTESIAN_POINT('',(194.612201,-42.433443,1.585)); +#256687 = VECTOR('',#256688,1.); +#256688 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#256689 = ORIENTED_EDGE('',*,*,#256690,.T.); +#256690 = EDGE_CURVE('',#256683,#256691,#256693,.T.); +#256691 = VERTEX_POINT('',#256692); +#256692 = CARTESIAN_POINT('',(194.523319,-42.583862,1.585)); +#256693 = LINE('',#256694,#256695); +#256694 = CARTESIAN_POINT('',(194.549996,-42.556154,1.585)); +#256695 = VECTOR('',#256696,1.); +#256696 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#256697 = ORIENTED_EDGE('',*,*,#256698,.T.); +#256698 = EDGE_CURVE('',#256691,#256699,#256701,.T.); +#256699 = VERTEX_POINT('',#256700); +#256700 = CARTESIAN_POINT('',(194.545278,-42.598695,1.585)); +#256701 = LINE('',#256702,#256703); +#256702 = CARTESIAN_POINT('',(194.523319,-42.583862,1.585)); +#256703 = VECTOR('',#256704,1.); +#256704 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#256705 = ORIENTED_EDGE('',*,*,#256706,.T.); +#256706 = EDGE_CURVE('',#256699,#256707,#256709,.T.); +#256707 = VERTEX_POINT('',#256708); +#256708 = CARTESIAN_POINT('',(194.606946,-42.665806,1.585)); +#256709 = LINE('',#256710,#256711); +#256710 = CARTESIAN_POINT('',(194.545278,-42.598695,1.585)); +#256711 = VECTOR('',#256712,1.); +#256712 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#256713 = ORIENTED_EDGE('',*,*,#256714,.T.); +#256714 = EDGE_CURVE('',#256707,#256715,#256717,.T.); +#256715 = VERTEX_POINT('',#256716); +#256716 = CARTESIAN_POINT('',(194.597615,-43.079963,1.585)); +#256717 = CIRCLE('',#256718,0.341850333486); +#256718 = AXIS2_PLACEMENT_3D('',#256719,#256720,#256721); +#256719 = CARTESIAN_POINT('',(194.33039659864,-42.86675892761,1.585)); +#256720 = DIRECTION('',(0.,0.,-1.)); +#256721 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#256722 = ORIENTED_EDGE('',*,*,#256723,.T.); +#256723 = EDGE_CURVE('',#256715,#256724,#256726,.T.); +#256724 = VERTEX_POINT('',#256725); +#256725 = CARTESIAN_POINT('',(194.532085,-43.143417,1.585)); +#256726 = LINE('',#256727,#256728); +#256727 = CARTESIAN_POINT('',(194.597615,-43.079963,1.585)); +#256728 = VECTOR('',#256729,1.); +#256729 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#256730 = ORIENTED_EDGE('',*,*,#256731,.T.); +#256731 = EDGE_CURVE('',#256724,#256732,#256734,.T.); +#256732 = VERTEX_POINT('',#256733); +#256733 = CARTESIAN_POINT('',(193.974387,-43.190279,1.585)); +#256734 = CIRCLE('',#256735,0.612118292739); +#256735 = AXIS2_PLACEMENT_3D('',#256736,#256737,#256738); +#256736 = CARTESIAN_POINT('',(194.20765114383,-42.62434910725,1.585)); +#256737 = DIRECTION('',(-0.,0.,-1.)); +#256738 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#256739 = ORIENTED_EDGE('',*,*,#256740,.T.); +#256740 = EDGE_CURVE('',#256732,#256741,#256743,.T.); +#256741 = VERTEX_POINT('',#256742); +#256742 = CARTESIAN_POINT('',(193.953695,-43.169587,1.585)); +#256743 = LINE('',#256744,#256745); +#256744 = CARTESIAN_POINT('',(193.974387,-43.190279,1.585)); +#256745 = VECTOR('',#256746,1.); +#256746 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#256747 = ORIENTED_EDGE('',*,*,#256748,.T.); +#256748 = EDGE_CURVE('',#256741,#256749,#256751,.T.); +#256749 = VERTEX_POINT('',#256750); +#256750 = CARTESIAN_POINT('',(193.941055,-43.127919,1.585)); +#256751 = LINE('',#256752,#256753); +#256752 = CARTESIAN_POINT('',(193.953695,-43.169587,1.585)); +#256753 = VECTOR('',#256754,1.); +#256754 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#256755 = ORIENTED_EDGE('',*,*,#256756,.T.); +#256756 = EDGE_CURVE('',#256749,#256647,#256757,.T.); +#256757 = LINE('',#256758,#256759); +#256758 = CARTESIAN_POINT('',(193.941055,-43.127919,1.585)); +#256759 = VECTOR('',#256760,1.); +#256760 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#256761 = FACE_BOUND('',#256762,.F.); +#256762 = EDGE_LOOP('',(#256763,#256773,#256781,#256789,#256797,#256806, + #256814,#256822)); +#256763 = ORIENTED_EDGE('',*,*,#256764,.T.); +#256764 = EDGE_CURVE('',#256765,#256767,#256769,.T.); +#256765 = VERTEX_POINT('',#256766); +#256766 = CARTESIAN_POINT('',(194.451731,-42.71728,1.585)); +#256767 = VERTEX_POINT('',#256768); +#256768 = CARTESIAN_POINT('',(194.337218,-42.679109,1.585)); +#256769 = LINE('',#256770,#256771); +#256770 = CARTESIAN_POINT('',(194.451731,-42.71728,1.585)); +#256771 = VECTOR('',#256772,1.); +#256772 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#256773 = ORIENTED_EDGE('',*,*,#256774,.T.); +#256774 = EDGE_CURVE('',#256767,#256775,#256777,.T.); +#256775 = VERTEX_POINT('',#256776); +#256776 = CARTESIAN_POINT('',(194.091055,-42.679109,1.585)); +#256777 = LINE('',#256778,#256779); +#256778 = CARTESIAN_POINT('',(194.337218,-42.679109,1.585)); +#256779 = VECTOR('',#256780,1.); +#256780 = DIRECTION('',(-1.,0.,0.)); +#256781 = ORIENTED_EDGE('',*,*,#256782,.T.); +#256782 = EDGE_CURVE('',#256775,#256783,#256785,.T.); +#256783 = VERTEX_POINT('',#256784); +#256784 = CARTESIAN_POINT('',(194.091055,-43.052919,1.585)); +#256785 = LINE('',#256786,#256787); +#256786 = CARTESIAN_POINT('',(194.091055,-42.679109,1.585)); +#256787 = VECTOR('',#256788,1.); +#256788 = DIRECTION('',(0.,-1.,0.)); +#256789 = ORIENTED_EDGE('',*,*,#256790,.T.); +#256790 = EDGE_CURVE('',#256783,#256791,#256793,.T.); +#256791 = VERTEX_POINT('',#256792); +#256792 = CARTESIAN_POINT('',(194.379302,-43.052919,1.585)); +#256793 = LINE('',#256794,#256795); +#256794 = CARTESIAN_POINT('',(194.091055,-43.052919,1.585)); +#256795 = VECTOR('',#256796,1.); +#256796 = DIRECTION('',(1.,0.,0.)); +#256797 = ORIENTED_EDGE('',*,*,#256798,.T.); +#256798 = EDGE_CURVE('',#256791,#256799,#256801,.T.); +#256799 = VERTEX_POINT('',#256800); +#256800 = CARTESIAN_POINT('',(194.512483,-42.919737,1.585)); +#256801 = CIRCLE('',#256802,0.186867760544); +#256802 = AXIS2_PLACEMENT_3D('',#256803,#256804,#256805); +#256803 = CARTESIAN_POINT('',(194.33176296928,-42.87219932622,1.585)); +#256804 = DIRECTION('',(0.,0.,1.)); +#256805 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#256806 = ORIENTED_EDGE('',*,*,#256807,.T.); +#256807 = EDGE_CURVE('',#256799,#256808,#256810,.T.); +#256808 = VERTEX_POINT('',#256809); +#256809 = CARTESIAN_POINT('',(194.512483,-42.81229,1.585)); +#256810 = LINE('',#256811,#256812); +#256811 = CARTESIAN_POINT('',(194.512483,-42.919737,1.585)); +#256812 = VECTOR('',#256813,1.); +#256813 = DIRECTION('',(0.,1.,0.)); +#256814 = ORIENTED_EDGE('',*,*,#256815,.T.); +#256815 = EDGE_CURVE('',#256808,#256816,#256818,.T.); +#256816 = VERTEX_POINT('',#256817); +#256817 = CARTESIAN_POINT('',(194.478225,-42.743774,1.585)); +#256818 = LINE('',#256819,#256820); +#256819 = CARTESIAN_POINT('',(194.512483,-42.81229,1.585)); +#256820 = VECTOR('',#256821,1.); +#256821 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#256822 = ORIENTED_EDGE('',*,*,#256823,.T.); +#256823 = EDGE_CURVE('',#256816,#256765,#256824,.T.); +#256824 = LINE('',#256825,#256826); +#256825 = CARTESIAN_POINT('',(194.478225,-42.743774,1.585)); +#256826 = VECTOR('',#256827,1.); +#256827 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#256828 = FACE_BOUND('',#256829,.F.); +#256829 = EDGE_LOOP('',(#256830,#256841,#256849,#256857,#256865,#256874) + ); +#256830 = ORIENTED_EDGE('',*,*,#256831,.T.); +#256831 = EDGE_CURVE('',#256832,#256834,#256836,.T.); +#256832 = VERTEX_POINT('',#256833); +#256833 = CARTESIAN_POINT('',(194.464864,-42.3361,1.585)); +#256834 = VERTEX_POINT('',#256835); +#256835 = CARTESIAN_POINT('',(194.331683,-42.202919,1.585)); +#256836 = CIRCLE('',#256837,0.18686440374); +#256837 = AXIS2_PLACEMENT_3D('',#256838,#256839,#256840); +#256838 = CARTESIAN_POINT('',(194.284147,-42.383636,1.585)); +#256839 = DIRECTION('',(0.,0.,1.)); +#256840 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#256841 = ORIENTED_EDGE('',*,*,#256842,.T.); +#256842 = EDGE_CURVE('',#256834,#256843,#256845,.T.); +#256843 = VERTEX_POINT('',#256844); +#256844 = CARTESIAN_POINT('',(194.091055,-42.202919,1.585)); +#256845 = LINE('',#256846,#256847); +#256846 = CARTESIAN_POINT('',(194.331683,-42.202919,1.585)); +#256847 = VECTOR('',#256848,1.); +#256848 = DIRECTION('',(-1.,0.,0.)); +#256849 = ORIENTED_EDGE('',*,*,#256850,.T.); +#256850 = EDGE_CURVE('',#256843,#256851,#256853,.T.); +#256851 = VERTEX_POINT('',#256852); +#256852 = CARTESIAN_POINT('',(194.091055,-42.529109,1.585)); +#256853 = LINE('',#256854,#256855); +#256854 = CARTESIAN_POINT('',(194.091055,-42.202919,1.585)); +#256855 = VECTOR('',#256856,1.); +#256856 = DIRECTION('',(0.,-1.,0.)); +#256857 = ORIENTED_EDGE('',*,*,#256858,.T.); +#256858 = EDGE_CURVE('',#256851,#256859,#256861,.T.); +#256859 = VERTEX_POINT('',#256860); +#256860 = CARTESIAN_POINT('',(194.331683,-42.529109,1.585)); +#256861 = LINE('',#256862,#256863); +#256862 = CARTESIAN_POINT('',(194.091055,-42.529109,1.585)); +#256863 = VECTOR('',#256864,1.); +#256864 = DIRECTION('',(1.,0.,0.)); +#256865 = ORIENTED_EDGE('',*,*,#256866,.T.); +#256866 = EDGE_CURVE('',#256859,#256867,#256869,.T.); +#256867 = VERTEX_POINT('',#256868); +#256868 = CARTESIAN_POINT('',(194.464864,-42.395928,1.585)); +#256869 = CIRCLE('',#256870,0.18686440374); +#256870 = AXIS2_PLACEMENT_3D('',#256871,#256872,#256873); +#256871 = CARTESIAN_POINT('',(194.284147,-42.348392,1.585)); +#256872 = DIRECTION('',(0.,0.,1.)); +#256873 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#256874 = ORIENTED_EDGE('',*,*,#256875,.T.); +#256875 = EDGE_CURVE('',#256867,#256832,#256876,.T.); +#256876 = LINE('',#256877,#256878); +#256877 = CARTESIAN_POINT('',(194.464864,-42.395928,1.585)); +#256878 = VECTOR('',#256879,1.); +#256879 = DIRECTION('',(0.,1.,0.)); +#256880 = PLANE('',#256881); +#256881 = AXIS2_PLACEMENT_3D('',#256882,#256883,#256884); +#256882 = CARTESIAN_POINT('',(0.,0.,1.585)); +#256883 = DIRECTION('',(0.,0.,1.)); +#256884 = DIRECTION('',(1.,0.,-0.)); +#256885 = SHELL_BASED_SURFACE_MODEL('',(#256886)); +#256886 = OPEN_SHELL('',(#256887)); +#256887 = ADVANCED_FACE('',(#256888,#257006,#257073),#257125,.T.); +#256888 = FACE_BOUND('',#256889,.F.); +#256889 = EDGE_LOOP('',(#256890,#256901,#256909,#256918,#256926,#256934, + #256942,#256950,#256958,#256967,#256975,#256984,#256992,#257000)); +#256890 = ORIENTED_EDGE('',*,*,#256891,.T.); +#256891 = EDGE_CURVE('',#256892,#256894,#256896,.T.); +#256892 = VERTEX_POINT('',#256893); +#256893 = CARTESIAN_POINT('',(197.942496,-42.113287,1.585)); +#256894 = VERTEX_POINT('',#256895); +#256895 = CARTESIAN_POINT('',(198.016055,-42.052919,1.585)); +#256896 = CIRCLE('',#256897,7.500074938983E-02); +#256897 = AXIS2_PLACEMENT_3D('',#256898,#256899,#256900); +#256898 = CARTESIAN_POINT('',(198.01605546611,-42.12791974938,1.585)); +#256899 = DIRECTION('',(0.,0.,-1.)); +#256900 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#256901 = ORIENTED_EDGE('',*,*,#256902,.T.); +#256902 = EDGE_CURVE('',#256894,#256903,#256905,.T.); +#256903 = VERTEX_POINT('',#256904); +#256904 = CARTESIAN_POINT('',(198.36402,-42.05436,1.585)); +#256905 = LINE('',#256906,#256907); +#256906 = CARTESIAN_POINT('',(198.016055,-42.052919,1.585)); +#256907 = VECTOR('',#256908,1.); +#256908 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#256909 = ORIENTED_EDGE('',*,*,#256910,.T.); +#256910 = EDGE_CURVE('',#256903,#256911,#256913,.T.); +#256911 = VERTEX_POINT('',#256912); +#256912 = CARTESIAN_POINT('',(198.613423,-42.303763,1.585)); +#256913 = CIRCLE('',#256914,0.347870264855); +#256914 = AXIS2_PLACEMENT_3D('',#256915,#256916,#256917); +#256915 = CARTESIAN_POINT('',(198.27669226502,-42.39109073497,1.585)); +#256916 = DIRECTION('',(0.,0.,-1.)); +#256917 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#256918 = ORIENTED_EDGE('',*,*,#256919,.T.); +#256919 = EDGE_CURVE('',#256911,#256920,#256922,.T.); +#256920 = VERTEX_POINT('',#256921); +#256921 = CARTESIAN_POINT('',(198.612201,-42.433443,1.585)); +#256922 = LINE('',#256923,#256924); +#256923 = CARTESIAN_POINT('',(198.613423,-42.303763,1.585)); +#256924 = VECTOR('',#256925,1.); +#256925 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#256926 = ORIENTED_EDGE('',*,*,#256927,.T.); +#256927 = EDGE_CURVE('',#256920,#256928,#256930,.T.); +#256928 = VERTEX_POINT('',#256929); +#256929 = CARTESIAN_POINT('',(198.549996,-42.556154,1.585)); +#256930 = LINE('',#256931,#256932); +#256931 = CARTESIAN_POINT('',(198.612201,-42.433443,1.585)); +#256932 = VECTOR('',#256933,1.); +#256933 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#256934 = ORIENTED_EDGE('',*,*,#256935,.T.); +#256935 = EDGE_CURVE('',#256928,#256936,#256938,.T.); +#256936 = VERTEX_POINT('',#256937); +#256937 = CARTESIAN_POINT('',(198.523319,-42.583862,1.585)); +#256938 = LINE('',#256939,#256940); +#256939 = CARTESIAN_POINT('',(198.549996,-42.556154,1.585)); +#256940 = VECTOR('',#256941,1.); +#256941 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#256942 = ORIENTED_EDGE('',*,*,#256943,.T.); +#256943 = EDGE_CURVE('',#256936,#256944,#256946,.T.); +#256944 = VERTEX_POINT('',#256945); +#256945 = CARTESIAN_POINT('',(198.545278,-42.598695,1.585)); +#256946 = LINE('',#256947,#256948); +#256947 = CARTESIAN_POINT('',(198.523319,-42.583862,1.585)); +#256948 = VECTOR('',#256949,1.); +#256949 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#256950 = ORIENTED_EDGE('',*,*,#256951,.T.); +#256951 = EDGE_CURVE('',#256944,#256952,#256954,.T.); +#256952 = VERTEX_POINT('',#256953); +#256953 = CARTESIAN_POINT('',(198.606946,-42.665806,1.585)); +#256954 = LINE('',#256955,#256956); +#256955 = CARTESIAN_POINT('',(198.545278,-42.598695,1.585)); +#256956 = VECTOR('',#256957,1.); +#256957 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#256958 = ORIENTED_EDGE('',*,*,#256959,.T.); +#256959 = EDGE_CURVE('',#256952,#256960,#256962,.T.); +#256960 = VERTEX_POINT('',#256961); +#256961 = CARTESIAN_POINT('',(198.597615,-43.079963,1.585)); +#256962 = CIRCLE('',#256963,0.341850333486); +#256963 = AXIS2_PLACEMENT_3D('',#256964,#256965,#256966); +#256964 = CARTESIAN_POINT('',(198.33039659864,-42.86675892761,1.585)); +#256965 = DIRECTION('',(0.,0.,-1.)); +#256966 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#256967 = ORIENTED_EDGE('',*,*,#256968,.T.); +#256968 = EDGE_CURVE('',#256960,#256969,#256971,.T.); +#256969 = VERTEX_POINT('',#256970); +#256970 = CARTESIAN_POINT('',(198.532085,-43.143417,1.585)); +#256971 = LINE('',#256972,#256973); +#256972 = CARTESIAN_POINT('',(198.597615,-43.079963,1.585)); +#256973 = VECTOR('',#256974,1.); +#256974 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#256975 = ORIENTED_EDGE('',*,*,#256976,.T.); +#256976 = EDGE_CURVE('',#256969,#256977,#256979,.T.); +#256977 = VERTEX_POINT('',#256978); +#256978 = CARTESIAN_POINT('',(197.974387,-43.190279,1.585)); +#256979 = CIRCLE('',#256980,0.612118292739); +#256980 = AXIS2_PLACEMENT_3D('',#256981,#256982,#256983); +#256981 = CARTESIAN_POINT('',(198.20765114383,-42.62434910725,1.585)); +#256982 = DIRECTION('',(-0.,0.,-1.)); +#256983 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#256984 = ORIENTED_EDGE('',*,*,#256985,.T.); +#256985 = EDGE_CURVE('',#256977,#256986,#256988,.T.); +#256986 = VERTEX_POINT('',#256987); +#256987 = CARTESIAN_POINT('',(197.953695,-43.169587,1.585)); +#256988 = LINE('',#256989,#256990); +#256989 = CARTESIAN_POINT('',(197.974387,-43.190279,1.585)); +#256990 = VECTOR('',#256991,1.); +#256991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#256992 = ORIENTED_EDGE('',*,*,#256993,.T.); +#256993 = EDGE_CURVE('',#256986,#256994,#256996,.T.); +#256994 = VERTEX_POINT('',#256995); +#256995 = CARTESIAN_POINT('',(197.941055,-43.127919,1.585)); +#256996 = LINE('',#256997,#256998); +#256997 = CARTESIAN_POINT('',(197.953695,-43.169587,1.585)); +#256998 = VECTOR('',#256999,1.); +#256999 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#257000 = ORIENTED_EDGE('',*,*,#257001,.T.); +#257001 = EDGE_CURVE('',#256994,#256892,#257002,.T.); +#257002 = LINE('',#257003,#257004); +#257003 = CARTESIAN_POINT('',(197.941055,-43.127919,1.585)); +#257004 = VECTOR('',#257005,1.); +#257005 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#257006 = FACE_BOUND('',#257007,.F.); +#257007 = EDGE_LOOP('',(#257008,#257018,#257026,#257034,#257042,#257051, + #257059,#257067)); +#257008 = ORIENTED_EDGE('',*,*,#257009,.T.); +#257009 = EDGE_CURVE('',#257010,#257012,#257014,.T.); +#257010 = VERTEX_POINT('',#257011); +#257011 = CARTESIAN_POINT('',(198.451731,-42.71728,1.585)); +#257012 = VERTEX_POINT('',#257013); +#257013 = CARTESIAN_POINT('',(198.337218,-42.679109,1.585)); +#257014 = LINE('',#257015,#257016); +#257015 = CARTESIAN_POINT('',(198.451731,-42.71728,1.585)); +#257016 = VECTOR('',#257017,1.); +#257017 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#257018 = ORIENTED_EDGE('',*,*,#257019,.T.); +#257019 = EDGE_CURVE('',#257012,#257020,#257022,.T.); +#257020 = VERTEX_POINT('',#257021); +#257021 = CARTESIAN_POINT('',(198.091055,-42.679109,1.585)); +#257022 = LINE('',#257023,#257024); +#257023 = CARTESIAN_POINT('',(198.337218,-42.679109,1.585)); +#257024 = VECTOR('',#257025,1.); +#257025 = DIRECTION('',(-1.,0.,0.)); +#257026 = ORIENTED_EDGE('',*,*,#257027,.T.); +#257027 = EDGE_CURVE('',#257020,#257028,#257030,.T.); +#257028 = VERTEX_POINT('',#257029); +#257029 = CARTESIAN_POINT('',(198.091055,-43.052919,1.585)); +#257030 = LINE('',#257031,#257032); +#257031 = CARTESIAN_POINT('',(198.091055,-42.679109,1.585)); +#257032 = VECTOR('',#257033,1.); +#257033 = DIRECTION('',(0.,-1.,0.)); +#257034 = ORIENTED_EDGE('',*,*,#257035,.T.); +#257035 = EDGE_CURVE('',#257028,#257036,#257038,.T.); +#257036 = VERTEX_POINT('',#257037); +#257037 = CARTESIAN_POINT('',(198.379302,-43.052919,1.585)); +#257038 = LINE('',#257039,#257040); +#257039 = CARTESIAN_POINT('',(198.091055,-43.052919,1.585)); +#257040 = VECTOR('',#257041,1.); +#257041 = DIRECTION('',(1.,0.,0.)); +#257042 = ORIENTED_EDGE('',*,*,#257043,.T.); +#257043 = EDGE_CURVE('',#257036,#257044,#257046,.T.); +#257044 = VERTEX_POINT('',#257045); +#257045 = CARTESIAN_POINT('',(198.512483,-42.919737,1.585)); +#257046 = CIRCLE('',#257047,0.186867760544); +#257047 = AXIS2_PLACEMENT_3D('',#257048,#257049,#257050); +#257048 = CARTESIAN_POINT('',(198.33176296928,-42.87219932622,1.585)); +#257049 = DIRECTION('',(0.,0.,1.)); +#257050 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#257051 = ORIENTED_EDGE('',*,*,#257052,.T.); +#257052 = EDGE_CURVE('',#257044,#257053,#257055,.T.); +#257053 = VERTEX_POINT('',#257054); +#257054 = CARTESIAN_POINT('',(198.512483,-42.81229,1.585)); +#257055 = LINE('',#257056,#257057); +#257056 = CARTESIAN_POINT('',(198.512483,-42.919737,1.585)); +#257057 = VECTOR('',#257058,1.); +#257058 = DIRECTION('',(0.,1.,0.)); +#257059 = ORIENTED_EDGE('',*,*,#257060,.T.); +#257060 = EDGE_CURVE('',#257053,#257061,#257063,.T.); +#257061 = VERTEX_POINT('',#257062); +#257062 = CARTESIAN_POINT('',(198.478225,-42.743774,1.585)); +#257063 = LINE('',#257064,#257065); +#257064 = CARTESIAN_POINT('',(198.512483,-42.81229,1.585)); +#257065 = VECTOR('',#257066,1.); +#257066 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#257067 = ORIENTED_EDGE('',*,*,#257068,.T.); +#257068 = EDGE_CURVE('',#257061,#257010,#257069,.T.); +#257069 = LINE('',#257070,#257071); +#257070 = CARTESIAN_POINT('',(198.478225,-42.743774,1.585)); +#257071 = VECTOR('',#257072,1.); +#257072 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257073 = FACE_BOUND('',#257074,.F.); +#257074 = EDGE_LOOP('',(#257075,#257086,#257094,#257102,#257110,#257119) + ); +#257075 = ORIENTED_EDGE('',*,*,#257076,.T.); +#257076 = EDGE_CURVE('',#257077,#257079,#257081,.T.); +#257077 = VERTEX_POINT('',#257078); +#257078 = CARTESIAN_POINT('',(198.464864,-42.3361,1.585)); +#257079 = VERTEX_POINT('',#257080); +#257080 = CARTESIAN_POINT('',(198.331683,-42.202919,1.585)); +#257081 = CIRCLE('',#257082,0.18686440374); +#257082 = AXIS2_PLACEMENT_3D('',#257083,#257084,#257085); +#257083 = CARTESIAN_POINT('',(198.284147,-42.383636,1.585)); +#257084 = DIRECTION('',(0.,0.,1.)); +#257085 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#257086 = ORIENTED_EDGE('',*,*,#257087,.T.); +#257087 = EDGE_CURVE('',#257079,#257088,#257090,.T.); +#257088 = VERTEX_POINT('',#257089); +#257089 = CARTESIAN_POINT('',(198.091055,-42.202919,1.585)); +#257090 = LINE('',#257091,#257092); +#257091 = CARTESIAN_POINT('',(198.331683,-42.202919,1.585)); +#257092 = VECTOR('',#257093,1.); +#257093 = DIRECTION('',(-1.,0.,0.)); +#257094 = ORIENTED_EDGE('',*,*,#257095,.T.); +#257095 = EDGE_CURVE('',#257088,#257096,#257098,.T.); +#257096 = VERTEX_POINT('',#257097); +#257097 = CARTESIAN_POINT('',(198.091055,-42.529109,1.585)); +#257098 = LINE('',#257099,#257100); +#257099 = CARTESIAN_POINT('',(198.091055,-42.202919,1.585)); +#257100 = VECTOR('',#257101,1.); +#257101 = DIRECTION('',(0.,-1.,0.)); +#257102 = ORIENTED_EDGE('',*,*,#257103,.T.); +#257103 = EDGE_CURVE('',#257096,#257104,#257106,.T.); +#257104 = VERTEX_POINT('',#257105); +#257105 = CARTESIAN_POINT('',(198.331683,-42.529109,1.585)); +#257106 = LINE('',#257107,#257108); +#257107 = CARTESIAN_POINT('',(198.091055,-42.529109,1.585)); +#257108 = VECTOR('',#257109,1.); +#257109 = DIRECTION('',(1.,0.,0.)); +#257110 = ORIENTED_EDGE('',*,*,#257111,.T.); +#257111 = EDGE_CURVE('',#257104,#257112,#257114,.T.); +#257112 = VERTEX_POINT('',#257113); +#257113 = CARTESIAN_POINT('',(198.464864,-42.395928,1.585)); +#257114 = CIRCLE('',#257115,0.18686440374); +#257115 = AXIS2_PLACEMENT_3D('',#257116,#257117,#257118); +#257116 = CARTESIAN_POINT('',(198.284147,-42.348392,1.585)); +#257117 = DIRECTION('',(0.,0.,1.)); +#257118 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#257119 = ORIENTED_EDGE('',*,*,#257120,.T.); +#257120 = EDGE_CURVE('',#257112,#257077,#257121,.T.); +#257121 = LINE('',#257122,#257123); +#257122 = CARTESIAN_POINT('',(198.464864,-42.395928,1.585)); +#257123 = VECTOR('',#257124,1.); +#257124 = DIRECTION('',(0.,1.,0.)); +#257125 = PLANE('',#257126); +#257126 = AXIS2_PLACEMENT_3D('',#257127,#257128,#257129); +#257127 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257128 = DIRECTION('',(0.,0.,1.)); +#257129 = DIRECTION('',(1.,0.,-0.)); +#257130 = SHELL_BASED_SURFACE_MODEL('',(#257131)); +#257131 = OPEN_SHELL('',(#257132)); +#257132 = ADVANCED_FACE('',(#257133,#257251,#257318),#257370,.T.); +#257133 = FACE_BOUND('',#257134,.F.); +#257134 = EDGE_LOOP('',(#257135,#257146,#257154,#257163,#257171,#257179, + #257187,#257195,#257203,#257212,#257220,#257229,#257237,#257245)); +#257135 = ORIENTED_EDGE('',*,*,#257136,.T.); +#257136 = EDGE_CURVE('',#257137,#257139,#257141,.T.); +#257137 = VERTEX_POINT('',#257138); +#257138 = CARTESIAN_POINT('',(201.942496,-42.113287,1.585)); +#257139 = VERTEX_POINT('',#257140); +#257140 = CARTESIAN_POINT('',(202.016055,-42.052919,1.585)); +#257141 = CIRCLE('',#257142,7.500074938983E-02); +#257142 = AXIS2_PLACEMENT_3D('',#257143,#257144,#257145); +#257143 = CARTESIAN_POINT('',(202.01605546611,-42.12791974938,1.585)); +#257144 = DIRECTION('',(0.,0.,-1.)); +#257145 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#257146 = ORIENTED_EDGE('',*,*,#257147,.T.); +#257147 = EDGE_CURVE('',#257139,#257148,#257150,.T.); +#257148 = VERTEX_POINT('',#257149); +#257149 = CARTESIAN_POINT('',(202.36402,-42.05436,1.585)); +#257150 = LINE('',#257151,#257152); +#257151 = CARTESIAN_POINT('',(202.016055,-42.052919,1.585)); +#257152 = VECTOR('',#257153,1.); +#257153 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#257154 = ORIENTED_EDGE('',*,*,#257155,.T.); +#257155 = EDGE_CURVE('',#257148,#257156,#257158,.T.); +#257156 = VERTEX_POINT('',#257157); +#257157 = CARTESIAN_POINT('',(202.613423,-42.303763,1.585)); +#257158 = CIRCLE('',#257159,0.347870264855); +#257159 = AXIS2_PLACEMENT_3D('',#257160,#257161,#257162); +#257160 = CARTESIAN_POINT('',(202.27669226502,-42.39109073497,1.585)); +#257161 = DIRECTION('',(0.,0.,-1.)); +#257162 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#257163 = ORIENTED_EDGE('',*,*,#257164,.T.); +#257164 = EDGE_CURVE('',#257156,#257165,#257167,.T.); +#257165 = VERTEX_POINT('',#257166); +#257166 = CARTESIAN_POINT('',(202.612201,-42.433443,1.585)); +#257167 = LINE('',#257168,#257169); +#257168 = CARTESIAN_POINT('',(202.613423,-42.303763,1.585)); +#257169 = VECTOR('',#257170,1.); +#257170 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#257171 = ORIENTED_EDGE('',*,*,#257172,.T.); +#257172 = EDGE_CURVE('',#257165,#257173,#257175,.T.); +#257173 = VERTEX_POINT('',#257174); +#257174 = CARTESIAN_POINT('',(202.549996,-42.556154,1.585)); +#257175 = LINE('',#257176,#257177); +#257176 = CARTESIAN_POINT('',(202.612201,-42.433443,1.585)); +#257177 = VECTOR('',#257178,1.); +#257178 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#257179 = ORIENTED_EDGE('',*,*,#257180,.T.); +#257180 = EDGE_CURVE('',#257173,#257181,#257183,.T.); +#257181 = VERTEX_POINT('',#257182); +#257182 = CARTESIAN_POINT('',(202.523319,-42.583862,1.585)); +#257183 = LINE('',#257184,#257185); +#257184 = CARTESIAN_POINT('',(202.549996,-42.556154,1.585)); +#257185 = VECTOR('',#257186,1.); +#257186 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#257187 = ORIENTED_EDGE('',*,*,#257188,.T.); +#257188 = EDGE_CURVE('',#257181,#257189,#257191,.T.); +#257189 = VERTEX_POINT('',#257190); +#257190 = CARTESIAN_POINT('',(202.545278,-42.598695,1.585)); +#257191 = LINE('',#257192,#257193); +#257192 = CARTESIAN_POINT('',(202.523319,-42.583862,1.585)); +#257193 = VECTOR('',#257194,1.); +#257194 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#257195 = ORIENTED_EDGE('',*,*,#257196,.T.); +#257196 = EDGE_CURVE('',#257189,#257197,#257199,.T.); +#257197 = VERTEX_POINT('',#257198); +#257198 = CARTESIAN_POINT('',(202.606946,-42.665806,1.585)); +#257199 = LINE('',#257200,#257201); +#257200 = CARTESIAN_POINT('',(202.545278,-42.598695,1.585)); +#257201 = VECTOR('',#257202,1.); +#257202 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#257203 = ORIENTED_EDGE('',*,*,#257204,.T.); +#257204 = EDGE_CURVE('',#257197,#257205,#257207,.T.); +#257205 = VERTEX_POINT('',#257206); +#257206 = CARTESIAN_POINT('',(202.597615,-43.079963,1.585)); +#257207 = CIRCLE('',#257208,0.341850333486); +#257208 = AXIS2_PLACEMENT_3D('',#257209,#257210,#257211); +#257209 = CARTESIAN_POINT('',(202.33039659864,-42.86675892761,1.585)); +#257210 = DIRECTION('',(0.,0.,-1.)); +#257211 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#257212 = ORIENTED_EDGE('',*,*,#257213,.T.); +#257213 = EDGE_CURVE('',#257205,#257214,#257216,.T.); +#257214 = VERTEX_POINT('',#257215); +#257215 = CARTESIAN_POINT('',(202.532085,-43.143417,1.585)); +#257216 = LINE('',#257217,#257218); +#257217 = CARTESIAN_POINT('',(202.597615,-43.079963,1.585)); +#257218 = VECTOR('',#257219,1.); +#257219 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#257220 = ORIENTED_EDGE('',*,*,#257221,.T.); +#257221 = EDGE_CURVE('',#257214,#257222,#257224,.T.); +#257222 = VERTEX_POINT('',#257223); +#257223 = CARTESIAN_POINT('',(201.974387,-43.190279,1.585)); +#257224 = CIRCLE('',#257225,0.612118292739); +#257225 = AXIS2_PLACEMENT_3D('',#257226,#257227,#257228); +#257226 = CARTESIAN_POINT('',(202.20765114383,-42.62434910725,1.585)); +#257227 = DIRECTION('',(-0.,0.,-1.)); +#257228 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#257229 = ORIENTED_EDGE('',*,*,#257230,.T.); +#257230 = EDGE_CURVE('',#257222,#257231,#257233,.T.); +#257231 = VERTEX_POINT('',#257232); +#257232 = CARTESIAN_POINT('',(201.953695,-43.169587,1.585)); +#257233 = LINE('',#257234,#257235); +#257234 = CARTESIAN_POINT('',(201.974387,-43.190279,1.585)); +#257235 = VECTOR('',#257236,1.); +#257236 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#257237 = ORIENTED_EDGE('',*,*,#257238,.T.); +#257238 = EDGE_CURVE('',#257231,#257239,#257241,.T.); +#257239 = VERTEX_POINT('',#257240); +#257240 = CARTESIAN_POINT('',(201.941055,-43.127919,1.585)); +#257241 = LINE('',#257242,#257243); +#257242 = CARTESIAN_POINT('',(201.953695,-43.169587,1.585)); +#257243 = VECTOR('',#257244,1.); +#257244 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#257245 = ORIENTED_EDGE('',*,*,#257246,.T.); +#257246 = EDGE_CURVE('',#257239,#257137,#257247,.T.); +#257247 = LINE('',#257248,#257249); +#257248 = CARTESIAN_POINT('',(201.941055,-43.127919,1.585)); +#257249 = VECTOR('',#257250,1.); +#257250 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#257251 = FACE_BOUND('',#257252,.F.); +#257252 = EDGE_LOOP('',(#257253,#257263,#257271,#257279,#257287,#257296, + #257304,#257312)); +#257253 = ORIENTED_EDGE('',*,*,#257254,.T.); +#257254 = EDGE_CURVE('',#257255,#257257,#257259,.T.); +#257255 = VERTEX_POINT('',#257256); +#257256 = CARTESIAN_POINT('',(202.451731,-42.71728,1.585)); +#257257 = VERTEX_POINT('',#257258); +#257258 = CARTESIAN_POINT('',(202.337218,-42.679109,1.585)); +#257259 = LINE('',#257260,#257261); +#257260 = CARTESIAN_POINT('',(202.451731,-42.71728,1.585)); +#257261 = VECTOR('',#257262,1.); +#257262 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#257263 = ORIENTED_EDGE('',*,*,#257264,.T.); +#257264 = EDGE_CURVE('',#257257,#257265,#257267,.T.); +#257265 = VERTEX_POINT('',#257266); +#257266 = CARTESIAN_POINT('',(202.091055,-42.679109,1.585)); +#257267 = LINE('',#257268,#257269); +#257268 = CARTESIAN_POINT('',(202.337218,-42.679109,1.585)); +#257269 = VECTOR('',#257270,1.); +#257270 = DIRECTION('',(-1.,0.,0.)); +#257271 = ORIENTED_EDGE('',*,*,#257272,.T.); +#257272 = EDGE_CURVE('',#257265,#257273,#257275,.T.); +#257273 = VERTEX_POINT('',#257274); +#257274 = CARTESIAN_POINT('',(202.091055,-43.052919,1.585)); +#257275 = LINE('',#257276,#257277); +#257276 = CARTESIAN_POINT('',(202.091055,-42.679109,1.585)); +#257277 = VECTOR('',#257278,1.); +#257278 = DIRECTION('',(0.,-1.,0.)); +#257279 = ORIENTED_EDGE('',*,*,#257280,.T.); +#257280 = EDGE_CURVE('',#257273,#257281,#257283,.T.); +#257281 = VERTEX_POINT('',#257282); +#257282 = CARTESIAN_POINT('',(202.379302,-43.052919,1.585)); +#257283 = LINE('',#257284,#257285); +#257284 = CARTESIAN_POINT('',(202.091055,-43.052919,1.585)); +#257285 = VECTOR('',#257286,1.); +#257286 = DIRECTION('',(1.,0.,0.)); +#257287 = ORIENTED_EDGE('',*,*,#257288,.T.); +#257288 = EDGE_CURVE('',#257281,#257289,#257291,.T.); +#257289 = VERTEX_POINT('',#257290); +#257290 = CARTESIAN_POINT('',(202.512483,-42.919737,1.585)); +#257291 = CIRCLE('',#257292,0.186867760544); +#257292 = AXIS2_PLACEMENT_3D('',#257293,#257294,#257295); +#257293 = CARTESIAN_POINT('',(202.33176296928,-42.87219932622,1.585)); +#257294 = DIRECTION('',(0.,0.,1.)); +#257295 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#257296 = ORIENTED_EDGE('',*,*,#257297,.T.); +#257297 = EDGE_CURVE('',#257289,#257298,#257300,.T.); +#257298 = VERTEX_POINT('',#257299); +#257299 = CARTESIAN_POINT('',(202.512483,-42.81229,1.585)); +#257300 = LINE('',#257301,#257302); +#257301 = CARTESIAN_POINT('',(202.512483,-42.919737,1.585)); +#257302 = VECTOR('',#257303,1.); +#257303 = DIRECTION('',(0.,1.,0.)); +#257304 = ORIENTED_EDGE('',*,*,#257305,.T.); +#257305 = EDGE_CURVE('',#257298,#257306,#257308,.T.); +#257306 = VERTEX_POINT('',#257307); +#257307 = CARTESIAN_POINT('',(202.478225,-42.743774,1.585)); +#257308 = LINE('',#257309,#257310); +#257309 = CARTESIAN_POINT('',(202.512483,-42.81229,1.585)); +#257310 = VECTOR('',#257311,1.); +#257311 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#257312 = ORIENTED_EDGE('',*,*,#257313,.T.); +#257313 = EDGE_CURVE('',#257306,#257255,#257314,.T.); +#257314 = LINE('',#257315,#257316); +#257315 = CARTESIAN_POINT('',(202.478225,-42.743774,1.585)); +#257316 = VECTOR('',#257317,1.); +#257317 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257318 = FACE_BOUND('',#257319,.F.); +#257319 = EDGE_LOOP('',(#257320,#257331,#257339,#257347,#257355,#257364) + ); +#257320 = ORIENTED_EDGE('',*,*,#257321,.T.); +#257321 = EDGE_CURVE('',#257322,#257324,#257326,.T.); +#257322 = VERTEX_POINT('',#257323); +#257323 = CARTESIAN_POINT('',(202.464864,-42.3361,1.585)); +#257324 = VERTEX_POINT('',#257325); +#257325 = CARTESIAN_POINT('',(202.331683,-42.202919,1.585)); +#257326 = CIRCLE('',#257327,0.18686440374); +#257327 = AXIS2_PLACEMENT_3D('',#257328,#257329,#257330); +#257328 = CARTESIAN_POINT('',(202.284147,-42.383636,1.585)); +#257329 = DIRECTION('',(0.,0.,1.)); +#257330 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#257331 = ORIENTED_EDGE('',*,*,#257332,.T.); +#257332 = EDGE_CURVE('',#257324,#257333,#257335,.T.); +#257333 = VERTEX_POINT('',#257334); +#257334 = CARTESIAN_POINT('',(202.091055,-42.202919,1.585)); +#257335 = LINE('',#257336,#257337); +#257336 = CARTESIAN_POINT('',(202.331683,-42.202919,1.585)); +#257337 = VECTOR('',#257338,1.); +#257338 = DIRECTION('',(-1.,0.,0.)); +#257339 = ORIENTED_EDGE('',*,*,#257340,.T.); +#257340 = EDGE_CURVE('',#257333,#257341,#257343,.T.); +#257341 = VERTEX_POINT('',#257342); +#257342 = CARTESIAN_POINT('',(202.091055,-42.529109,1.585)); +#257343 = LINE('',#257344,#257345); +#257344 = CARTESIAN_POINT('',(202.091055,-42.202919,1.585)); +#257345 = VECTOR('',#257346,1.); +#257346 = DIRECTION('',(0.,-1.,0.)); +#257347 = ORIENTED_EDGE('',*,*,#257348,.T.); +#257348 = EDGE_CURVE('',#257341,#257349,#257351,.T.); +#257349 = VERTEX_POINT('',#257350); +#257350 = CARTESIAN_POINT('',(202.331683,-42.529109,1.585)); +#257351 = LINE('',#257352,#257353); +#257352 = CARTESIAN_POINT('',(202.091055,-42.529109,1.585)); +#257353 = VECTOR('',#257354,1.); +#257354 = DIRECTION('',(1.,0.,0.)); +#257355 = ORIENTED_EDGE('',*,*,#257356,.T.); +#257356 = EDGE_CURVE('',#257349,#257357,#257359,.T.); +#257357 = VERTEX_POINT('',#257358); +#257358 = CARTESIAN_POINT('',(202.464864,-42.395928,1.585)); +#257359 = CIRCLE('',#257360,0.18686440374); +#257360 = AXIS2_PLACEMENT_3D('',#257361,#257362,#257363); +#257361 = CARTESIAN_POINT('',(202.284147,-42.348392,1.585)); +#257362 = DIRECTION('',(0.,0.,1.)); +#257363 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#257364 = ORIENTED_EDGE('',*,*,#257365,.T.); +#257365 = EDGE_CURVE('',#257357,#257322,#257366,.T.); +#257366 = LINE('',#257367,#257368); +#257367 = CARTESIAN_POINT('',(202.464864,-42.395928,1.585)); +#257368 = VECTOR('',#257369,1.); +#257369 = DIRECTION('',(0.,1.,0.)); +#257370 = PLANE('',#257371); +#257371 = AXIS2_PLACEMENT_3D('',#257372,#257373,#257374); +#257372 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257373 = DIRECTION('',(0.,0.,1.)); +#257374 = DIRECTION('',(1.,0.,-0.)); +#257375 = SHELL_BASED_SURFACE_MODEL('',(#257376)); +#257376 = OPEN_SHELL('',(#257377)); +#257377 = ADVANCED_FACE('',(#257378),#257564,.T.); +#257378 = FACE_BOUND('',#257379,.F.); +#257379 = EDGE_LOOP('',(#257380,#257391,#257399,#257408,#257416,#257424, + #257433,#257441,#257450,#257458,#257466,#257474,#257483,#257491, + #257500,#257508,#257517,#257525,#257533,#257541,#257550,#257558)); +#257380 = ORIENTED_EDGE('',*,*,#257381,.T.); +#257381 = EDGE_CURVE('',#257382,#257384,#257386,.T.); +#257382 = VERTEX_POINT('',#257383); +#257383 = CARTESIAN_POINT('',(202.906185,-42.201478,1.585)); +#257384 = VERTEX_POINT('',#257385); +#257385 = CARTESIAN_POINT('',(202.920817,-42.052919,1.585)); +#257386 = CIRCLE('',#257387,7.500006711464E-02); +#257387 = AXIS2_PLACEMENT_3D('',#257388,#257389,#257390); +#257388 = CARTESIAN_POINT('',(202.92081693288,-42.12791906711,1.585)); +#257389 = DIRECTION('',(0.,0.,-1.)); +#257390 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#257391 = ORIENTED_EDGE('',*,*,#257392,.T.); +#257392 = EDGE_CURVE('',#257384,#257393,#257395,.T.); +#257393 = VERTEX_POINT('',#257394); +#257394 = CARTESIAN_POINT('',(203.547602,-42.053681,1.585)); +#257395 = LINE('',#257396,#257397); +#257396 = CARTESIAN_POINT('',(202.920817,-42.052919,1.585)); +#257397 = VECTOR('',#257398,1.); +#257398 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#257399 = ORIENTED_EDGE('',*,*,#257400,.T.); +#257400 = EDGE_CURVE('',#257393,#257401,#257403,.T.); +#257401 = VERTEX_POINT('',#257402); +#257402 = CARTESIAN_POINT('',(203.613423,-42.142551,1.585)); +#257403 = CIRCLE('',#257404,7.447391611626E-02); +#257404 = AXIS2_PLACEMENT_3D('',#257405,#257406,#257407); +#257405 = CARTESIAN_POINT('',(203.54042292664,-42.1278080874,1.585)); +#257406 = DIRECTION('',(0.,0.,-1.)); +#257407 = DIRECTION('',(9.639715124814E-02,0.995342950561,0.)); +#257408 = ORIENTED_EDGE('',*,*,#257409,.T.); +#257409 = EDGE_CURVE('',#257401,#257410,#257412,.T.); +#257410 = VERTEX_POINT('',#257411); +#257411 = CARTESIAN_POINT('',(203.596307,-42.177307,1.585)); +#257412 = LINE('',#257413,#257414); +#257413 = CARTESIAN_POINT('',(203.613423,-42.142551,1.585)); +#257414 = VECTOR('',#257415,1.); +#257415 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#257416 = ORIENTED_EDGE('',*,*,#257417,.T.); +#257417 = EDGE_CURVE('',#257410,#257418,#257420,.T.); +#257418 = VERTEX_POINT('',#257419); +#257419 = CARTESIAN_POINT('',(203.369411,-42.436616,1.585)); +#257420 = LINE('',#257421,#257422); +#257421 = CARTESIAN_POINT('',(203.596307,-42.177307,1.585)); +#257422 = VECTOR('',#257423,1.); +#257423 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#257424 = ORIENTED_EDGE('',*,*,#257425,.T.); +#257425 = EDGE_CURVE('',#257418,#257426,#257428,.T.); +#257426 = VERTEX_POINT('',#257427); +#257427 = CARTESIAN_POINT('',(203.613423,-42.684715,1.585)); +#257428 = CIRCLE('',#257429,0.348520834816); +#257429 = AXIS2_PLACEMENT_3D('',#257430,#257431,#257432); +#257430 = CARTESIAN_POINT('',(203.2761176174,-42.77241819931,1.585)); +#257431 = DIRECTION('',(0.,0.,-1.)); +#257432 = DIRECTION('',(0.267683803322,0.963506814423,0.)); +#257433 = ORIENTED_EDGE('',*,*,#257434,.T.); +#257434 = EDGE_CURVE('',#257426,#257435,#257437,.T.); +#257435 = VERTEX_POINT('',#257436); +#257436 = CARTESIAN_POINT('',(203.612201,-42.957252,1.585)); +#257437 = LINE('',#257438,#257439); +#257438 = CARTESIAN_POINT('',(203.613423,-42.684715,1.585)); +#257439 = VECTOR('',#257440,1.); +#257440 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#257441 = ORIENTED_EDGE('',*,*,#257442,.T.); +#257442 = EDGE_CURVE('',#257435,#257443,#257445,.T.); +#257443 = VERTEX_POINT('',#257444); +#257444 = CARTESIAN_POINT('',(203.36402,-43.201478,1.585)); +#257445 = CIRCLE('',#257446,0.348635327447); +#257446 = AXIS2_PLACEMENT_3D('',#257447,#257448,#257449); +#257447 = CARTESIAN_POINT('',(203.27624848129,-42.86407208415,1.585)); +#257448 = DIRECTION('',(0.,0.,-1.)); +#257449 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#257450 = ORIENTED_EDGE('',*,*,#257451,.T.); +#257451 = EDGE_CURVE('',#257443,#257452,#257454,.T.); +#257452 = VERTEX_POINT('',#257453); +#257453 = CARTESIAN_POINT('',(203.043864,-43.200256,1.585)); +#257454 = LINE('',#257455,#257456); +#257455 = CARTESIAN_POINT('',(203.36402,-43.201478,1.585)); +#257456 = VECTOR('',#257457,1.); +#257457 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#257458 = ORIENTED_EDGE('',*,*,#257459,.T.); +#257459 = EDGE_CURVE('',#257452,#257460,#257462,.T.); +#257460 = VERTEX_POINT('',#257461); +#257461 = CARTESIAN_POINT('',(202.921151,-43.13805,1.585)); +#257462 = LINE('',#257463,#257464); +#257463 = CARTESIAN_POINT('',(203.043864,-43.200256,1.585)); +#257464 = VECTOR('',#257465,1.); +#257465 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#257466 = ORIENTED_EDGE('',*,*,#257467,.T.); +#257467 = EDGE_CURVE('',#257460,#257468,#257470,.T.); +#257468 = VERTEX_POINT('',#257469); +#257469 = CARTESIAN_POINT('',(202.858456,-43.074347,1.585)); +#257470 = LINE('',#257471,#257472); +#257471 = CARTESIAN_POINT('',(202.921151,-43.13805,1.585)); +#257472 = VECTOR('',#257473,1.); +#257473 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#257474 = ORIENTED_EDGE('',*,*,#257475,.T.); +#257475 = EDGE_CURVE('',#257468,#257476,#257478,.T.); +#257476 = VERTEX_POINT('',#257477); +#257477 = CARTESIAN_POINT('',(202.973851,-42.979648,1.585)); +#257478 = CIRCLE('',#257479,7.500012668041E-02); +#257479 = AXIS2_PLACEMENT_3D('',#257480,#257481,#257482); +#257480 = CARTESIAN_POINT('',(202.92081705199,-43.03268024831,1.585)); +#257481 = DIRECTION('',(0.,0.,-1.)); +#257482 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#257483 = ORIENTED_EDGE('',*,*,#257484,.T.); +#257484 = EDGE_CURVE('',#257476,#257485,#257487,.T.); +#257485 = VERTEX_POINT('',#257486); +#257486 = CARTESIAN_POINT('',(203.012863,-43.018661,1.585)); +#257487 = LINE('',#257488,#257489); +#257488 = CARTESIAN_POINT('',(202.973851,-42.979648,1.585)); +#257489 = VECTOR('',#257490,1.); +#257490 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#257491 = ORIENTED_EDGE('',*,*,#257492,.T.); +#257492 = EDGE_CURVE('',#257485,#257493,#257495,.T.); +#257493 = VERTEX_POINT('',#257494); +#257494 = CARTESIAN_POINT('',(203.400198,-43.018661,1.585)); +#257495 = CIRCLE('',#257496,0.358502380266); +#257496 = AXIS2_PLACEMENT_3D('',#257497,#257498,#257499); +#257497 = CARTESIAN_POINT('',(203.2065305,-42.716971,1.585)); +#257498 = DIRECTION('',(0.,0.,1.)); +#257499 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#257500 = ORIENTED_EDGE('',*,*,#257501,.T.); +#257501 = EDGE_CURVE('',#257493,#257502,#257504,.T.); +#257502 = VERTEX_POINT('',#257503); +#257503 = CARTESIAN_POINT('',(203.430605,-42.988253,1.585)); +#257504 = LINE('',#257505,#257506); +#257505 = CARTESIAN_POINT('',(203.400198,-43.018661,1.585)); +#257506 = VECTOR('',#257507,1.); +#257507 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#257508 = ORIENTED_EDGE('',*,*,#257509,.T.); +#257509 = EDGE_CURVE('',#257502,#257510,#257512,.T.); +#257510 = VERTEX_POINT('',#257511); +#257511 = CARTESIAN_POINT('',(203.430606,-42.648536,1.585)); +#257512 = CIRCLE('',#257513,0.305616146029); +#257513 = AXIS2_PLACEMENT_3D('',#257514,#257515,#257516); +#257514 = CARTESIAN_POINT('',(203.17653992049,-42.81839375212,1.585)); +#257515 = DIRECTION('',(0.,-0.,1.)); +#257516 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#257517 = ORIENTED_EDGE('',*,*,#257518,.T.); +#257518 = EDGE_CURVE('',#257510,#257519,#257521,.T.); +#257519 = VERTEX_POINT('',#257520); +#257520 = CARTESIAN_POINT('',(203.400199,-42.618129,1.585)); +#257521 = LINE('',#257522,#257523); +#257522 = CARTESIAN_POINT('',(203.430606,-42.648536,1.585)); +#257523 = VECTOR('',#257524,1.); +#257524 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257525 = ORIENTED_EDGE('',*,*,#257526,.T.); +#257526 = EDGE_CURVE('',#257519,#257527,#257529,.T.); +#257527 = VERTEX_POINT('',#257528); +#257528 = CARTESIAN_POINT('',(203.331683,-42.583871,1.585)); +#257529 = LINE('',#257530,#257531); +#257530 = CARTESIAN_POINT('',(203.400199,-42.618129,1.585)); +#257531 = VECTOR('',#257532,1.); +#257532 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#257533 = ORIENTED_EDGE('',*,*,#257534,.T.); +#257534 = EDGE_CURVE('',#257527,#257535,#257537,.T.); +#257535 = VERTEX_POINT('',#257536); +#257536 = CARTESIAN_POINT('',(203.191899,-42.58243,1.585)); +#257537 = LINE('',#257538,#257539); +#257538 = CARTESIAN_POINT('',(203.331683,-42.583871,1.585)); +#257539 = VECTOR('',#257540,1.); +#257540 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#257541 = ORIENTED_EDGE('',*,*,#257542,.T.); +#257542 = EDGE_CURVE('',#257535,#257543,#257545,.T.); +#257543 = VERTEX_POINT('',#257544); +#257544 = CARTESIAN_POINT('',(203.150088,-42.459483,1.585)); +#257545 = CIRCLE('',#257546,7.500015628756E-02); +#257546 = AXIS2_PLACEMENT_3D('',#257547,#257548,#257549); +#257547 = CARTESIAN_POINT('',(203.20653128432,-42.5088710461,1.585)); +#257548 = DIRECTION('',(0.,0.,-1.)); +#257549 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#257550 = ORIENTED_EDGE('',*,*,#257551,.T.); +#257551 = EDGE_CURVE('',#257543,#257552,#257554,.T.); +#257552 = VERTEX_POINT('',#257553); +#257553 = CARTESIAN_POINT('',(203.374582,-42.202919,1.585)); +#257554 = LINE('',#257555,#257556); +#257555 = CARTESIAN_POINT('',(203.150088,-42.459483,1.585)); +#257556 = VECTOR('',#257557,1.); +#257557 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#257558 = ORIENTED_EDGE('',*,*,#257559,.T.); +#257559 = EDGE_CURVE('',#257552,#257382,#257560,.T.); +#257560 = LINE('',#257561,#257562); +#257561 = CARTESIAN_POINT('',(203.374582,-42.202919,1.585)); +#257562 = VECTOR('',#257563,1.); +#257563 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#257564 = PLANE('',#257565); +#257565 = AXIS2_PLACEMENT_3D('',#257566,#257567,#257568); +#257566 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257567 = DIRECTION('',(0.,0.,1.)); +#257568 = DIRECTION('',(1.,0.,-0.)); +#257569 = SHELL_BASED_SURFACE_MODEL('',(#257570)); +#257570 = OPEN_SHELL('',(#257571)); +#257571 = ADVANCED_FACE('',(#257572,#257690,#257757),#257809,.T.); +#257572 = FACE_BOUND('',#257573,.F.); +#257573 = EDGE_LOOP('',(#257574,#257585,#257593,#257602,#257610,#257618, + #257626,#257634,#257642,#257651,#257659,#257668,#257676,#257684)); +#257574 = ORIENTED_EDGE('',*,*,#257575,.T.); +#257575 = EDGE_CURVE('',#257576,#257578,#257580,.T.); +#257576 = VERTEX_POINT('',#257577); +#257577 = CARTESIAN_POINT('',(205.942496,-42.113287,1.585)); +#257578 = VERTEX_POINT('',#257579); +#257579 = CARTESIAN_POINT('',(206.016055,-42.052919,1.585)); +#257580 = CIRCLE('',#257581,7.500074938983E-02); +#257581 = AXIS2_PLACEMENT_3D('',#257582,#257583,#257584); +#257582 = CARTESIAN_POINT('',(206.01605546611,-42.12791974938,1.585)); +#257583 = DIRECTION('',(0.,0.,-1.)); +#257584 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#257585 = ORIENTED_EDGE('',*,*,#257586,.T.); +#257586 = EDGE_CURVE('',#257578,#257587,#257589,.T.); +#257587 = VERTEX_POINT('',#257588); +#257588 = CARTESIAN_POINT('',(206.36402,-42.05436,1.585)); +#257589 = LINE('',#257590,#257591); +#257590 = CARTESIAN_POINT('',(206.016055,-42.052919,1.585)); +#257591 = VECTOR('',#257592,1.); +#257592 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#257593 = ORIENTED_EDGE('',*,*,#257594,.T.); +#257594 = EDGE_CURVE('',#257587,#257595,#257597,.T.); +#257595 = VERTEX_POINT('',#257596); +#257596 = CARTESIAN_POINT('',(206.613423,-42.303763,1.585)); +#257597 = CIRCLE('',#257598,0.347870264855); +#257598 = AXIS2_PLACEMENT_3D('',#257599,#257600,#257601); +#257599 = CARTESIAN_POINT('',(206.27669226502,-42.39109073497,1.585)); +#257600 = DIRECTION('',(0.,0.,-1.)); +#257601 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#257602 = ORIENTED_EDGE('',*,*,#257603,.T.); +#257603 = EDGE_CURVE('',#257595,#257604,#257606,.T.); +#257604 = VERTEX_POINT('',#257605); +#257605 = CARTESIAN_POINT('',(206.612201,-42.433443,1.585)); +#257606 = LINE('',#257607,#257608); +#257607 = CARTESIAN_POINT('',(206.613423,-42.303763,1.585)); +#257608 = VECTOR('',#257609,1.); +#257609 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#257610 = ORIENTED_EDGE('',*,*,#257611,.T.); +#257611 = EDGE_CURVE('',#257604,#257612,#257614,.T.); +#257612 = VERTEX_POINT('',#257613); +#257613 = CARTESIAN_POINT('',(206.549996,-42.556154,1.585)); +#257614 = LINE('',#257615,#257616); +#257615 = CARTESIAN_POINT('',(206.612201,-42.433443,1.585)); +#257616 = VECTOR('',#257617,1.); +#257617 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#257618 = ORIENTED_EDGE('',*,*,#257619,.T.); +#257619 = EDGE_CURVE('',#257612,#257620,#257622,.T.); +#257620 = VERTEX_POINT('',#257621); +#257621 = CARTESIAN_POINT('',(206.523319,-42.583862,1.585)); +#257622 = LINE('',#257623,#257624); +#257623 = CARTESIAN_POINT('',(206.549996,-42.556154,1.585)); +#257624 = VECTOR('',#257625,1.); +#257625 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#257626 = ORIENTED_EDGE('',*,*,#257627,.T.); +#257627 = EDGE_CURVE('',#257620,#257628,#257630,.T.); +#257628 = VERTEX_POINT('',#257629); +#257629 = CARTESIAN_POINT('',(206.545278,-42.598695,1.585)); +#257630 = LINE('',#257631,#257632); +#257631 = CARTESIAN_POINT('',(206.523319,-42.583862,1.585)); +#257632 = VECTOR('',#257633,1.); +#257633 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#257634 = ORIENTED_EDGE('',*,*,#257635,.T.); +#257635 = EDGE_CURVE('',#257628,#257636,#257638,.T.); +#257636 = VERTEX_POINT('',#257637); +#257637 = CARTESIAN_POINT('',(206.606946,-42.665806,1.585)); +#257638 = LINE('',#257639,#257640); +#257639 = CARTESIAN_POINT('',(206.545278,-42.598695,1.585)); +#257640 = VECTOR('',#257641,1.); +#257641 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#257642 = ORIENTED_EDGE('',*,*,#257643,.T.); +#257643 = EDGE_CURVE('',#257636,#257644,#257646,.T.); +#257644 = VERTEX_POINT('',#257645); +#257645 = CARTESIAN_POINT('',(206.597615,-43.079963,1.585)); +#257646 = CIRCLE('',#257647,0.341850333486); +#257647 = AXIS2_PLACEMENT_3D('',#257648,#257649,#257650); +#257648 = CARTESIAN_POINT('',(206.33039659864,-42.86675892761,1.585)); +#257649 = DIRECTION('',(0.,0.,-1.)); +#257650 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#257651 = ORIENTED_EDGE('',*,*,#257652,.T.); +#257652 = EDGE_CURVE('',#257644,#257653,#257655,.T.); +#257653 = VERTEX_POINT('',#257654); +#257654 = CARTESIAN_POINT('',(206.532085,-43.143417,1.585)); +#257655 = LINE('',#257656,#257657); +#257656 = CARTESIAN_POINT('',(206.597615,-43.079963,1.585)); +#257657 = VECTOR('',#257658,1.); +#257658 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#257659 = ORIENTED_EDGE('',*,*,#257660,.T.); +#257660 = EDGE_CURVE('',#257653,#257661,#257663,.T.); +#257661 = VERTEX_POINT('',#257662); +#257662 = CARTESIAN_POINT('',(205.974387,-43.190279,1.585)); +#257663 = CIRCLE('',#257664,0.612118292739); +#257664 = AXIS2_PLACEMENT_3D('',#257665,#257666,#257667); +#257665 = CARTESIAN_POINT('',(206.20765114383,-42.62434910725,1.585)); +#257666 = DIRECTION('',(-0.,0.,-1.)); +#257667 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#257668 = ORIENTED_EDGE('',*,*,#257669,.T.); +#257669 = EDGE_CURVE('',#257661,#257670,#257672,.T.); +#257670 = VERTEX_POINT('',#257671); +#257671 = CARTESIAN_POINT('',(205.953695,-43.169587,1.585)); +#257672 = LINE('',#257673,#257674); +#257673 = CARTESIAN_POINT('',(205.974387,-43.190279,1.585)); +#257674 = VECTOR('',#257675,1.); +#257675 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#257676 = ORIENTED_EDGE('',*,*,#257677,.T.); +#257677 = EDGE_CURVE('',#257670,#257678,#257680,.T.); +#257678 = VERTEX_POINT('',#257679); +#257679 = CARTESIAN_POINT('',(205.941055,-43.127919,1.585)); +#257680 = LINE('',#257681,#257682); +#257681 = CARTESIAN_POINT('',(205.953695,-43.169587,1.585)); +#257682 = VECTOR('',#257683,1.); +#257683 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#257684 = ORIENTED_EDGE('',*,*,#257685,.T.); +#257685 = EDGE_CURVE('',#257678,#257576,#257686,.T.); +#257686 = LINE('',#257687,#257688); +#257687 = CARTESIAN_POINT('',(205.941055,-43.127919,1.585)); +#257688 = VECTOR('',#257689,1.); +#257689 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#257690 = FACE_BOUND('',#257691,.F.); +#257691 = EDGE_LOOP('',(#257692,#257702,#257710,#257718,#257726,#257735, + #257743,#257751)); +#257692 = ORIENTED_EDGE('',*,*,#257693,.T.); +#257693 = EDGE_CURVE('',#257694,#257696,#257698,.T.); +#257694 = VERTEX_POINT('',#257695); +#257695 = CARTESIAN_POINT('',(206.451731,-42.71728,1.585)); +#257696 = VERTEX_POINT('',#257697); +#257697 = CARTESIAN_POINT('',(206.337218,-42.679109,1.585)); +#257698 = LINE('',#257699,#257700); +#257699 = CARTESIAN_POINT('',(206.451731,-42.71728,1.585)); +#257700 = VECTOR('',#257701,1.); +#257701 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#257702 = ORIENTED_EDGE('',*,*,#257703,.T.); +#257703 = EDGE_CURVE('',#257696,#257704,#257706,.T.); +#257704 = VERTEX_POINT('',#257705); +#257705 = CARTESIAN_POINT('',(206.091055,-42.679109,1.585)); +#257706 = LINE('',#257707,#257708); +#257707 = CARTESIAN_POINT('',(206.337218,-42.679109,1.585)); +#257708 = VECTOR('',#257709,1.); +#257709 = DIRECTION('',(-1.,0.,0.)); +#257710 = ORIENTED_EDGE('',*,*,#257711,.T.); +#257711 = EDGE_CURVE('',#257704,#257712,#257714,.T.); +#257712 = VERTEX_POINT('',#257713); +#257713 = CARTESIAN_POINT('',(206.091055,-43.052919,1.585)); +#257714 = LINE('',#257715,#257716); +#257715 = CARTESIAN_POINT('',(206.091055,-42.679109,1.585)); +#257716 = VECTOR('',#257717,1.); +#257717 = DIRECTION('',(0.,-1.,0.)); +#257718 = ORIENTED_EDGE('',*,*,#257719,.T.); +#257719 = EDGE_CURVE('',#257712,#257720,#257722,.T.); +#257720 = VERTEX_POINT('',#257721); +#257721 = CARTESIAN_POINT('',(206.379302,-43.052919,1.585)); +#257722 = LINE('',#257723,#257724); +#257723 = CARTESIAN_POINT('',(206.091055,-43.052919,1.585)); +#257724 = VECTOR('',#257725,1.); +#257725 = DIRECTION('',(1.,0.,0.)); +#257726 = ORIENTED_EDGE('',*,*,#257727,.T.); +#257727 = EDGE_CURVE('',#257720,#257728,#257730,.T.); +#257728 = VERTEX_POINT('',#257729); +#257729 = CARTESIAN_POINT('',(206.512483,-42.919737,1.585)); +#257730 = CIRCLE('',#257731,0.186867760544); +#257731 = AXIS2_PLACEMENT_3D('',#257732,#257733,#257734); +#257732 = CARTESIAN_POINT('',(206.33176296928,-42.87219932622,1.585)); +#257733 = DIRECTION('',(0.,0.,1.)); +#257734 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#257735 = ORIENTED_EDGE('',*,*,#257736,.T.); +#257736 = EDGE_CURVE('',#257728,#257737,#257739,.T.); +#257737 = VERTEX_POINT('',#257738); +#257738 = CARTESIAN_POINT('',(206.512483,-42.81229,1.585)); +#257739 = LINE('',#257740,#257741); +#257740 = CARTESIAN_POINT('',(206.512483,-42.919737,1.585)); +#257741 = VECTOR('',#257742,1.); +#257742 = DIRECTION('',(0.,1.,0.)); +#257743 = ORIENTED_EDGE('',*,*,#257744,.T.); +#257744 = EDGE_CURVE('',#257737,#257745,#257747,.T.); +#257745 = VERTEX_POINT('',#257746); +#257746 = CARTESIAN_POINT('',(206.478225,-42.743774,1.585)); +#257747 = LINE('',#257748,#257749); +#257748 = CARTESIAN_POINT('',(206.512483,-42.81229,1.585)); +#257749 = VECTOR('',#257750,1.); +#257750 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#257751 = ORIENTED_EDGE('',*,*,#257752,.T.); +#257752 = EDGE_CURVE('',#257745,#257694,#257753,.T.); +#257753 = LINE('',#257754,#257755); +#257754 = CARTESIAN_POINT('',(206.478225,-42.743774,1.585)); +#257755 = VECTOR('',#257756,1.); +#257756 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#257757 = FACE_BOUND('',#257758,.F.); +#257758 = EDGE_LOOP('',(#257759,#257770,#257778,#257786,#257794,#257803) + ); +#257759 = ORIENTED_EDGE('',*,*,#257760,.T.); +#257760 = EDGE_CURVE('',#257761,#257763,#257765,.T.); +#257761 = VERTEX_POINT('',#257762); +#257762 = CARTESIAN_POINT('',(206.464864,-42.3361,1.585)); +#257763 = VERTEX_POINT('',#257764); +#257764 = CARTESIAN_POINT('',(206.331683,-42.202919,1.585)); +#257765 = CIRCLE('',#257766,0.18686440374); +#257766 = AXIS2_PLACEMENT_3D('',#257767,#257768,#257769); +#257767 = CARTESIAN_POINT('',(206.284147,-42.383636,1.585)); +#257768 = DIRECTION('',(0.,0.,1.)); +#257769 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#257770 = ORIENTED_EDGE('',*,*,#257771,.T.); +#257771 = EDGE_CURVE('',#257763,#257772,#257774,.T.); +#257772 = VERTEX_POINT('',#257773); +#257773 = CARTESIAN_POINT('',(206.091055,-42.202919,1.585)); +#257774 = LINE('',#257775,#257776); +#257775 = CARTESIAN_POINT('',(206.331683,-42.202919,1.585)); +#257776 = VECTOR('',#257777,1.); +#257777 = DIRECTION('',(-1.,0.,0.)); +#257778 = ORIENTED_EDGE('',*,*,#257779,.T.); +#257779 = EDGE_CURVE('',#257772,#257780,#257782,.T.); +#257780 = VERTEX_POINT('',#257781); +#257781 = CARTESIAN_POINT('',(206.091055,-42.529109,1.585)); +#257782 = LINE('',#257783,#257784); +#257783 = CARTESIAN_POINT('',(206.091055,-42.202919,1.585)); +#257784 = VECTOR('',#257785,1.); +#257785 = DIRECTION('',(0.,-1.,0.)); +#257786 = ORIENTED_EDGE('',*,*,#257787,.T.); +#257787 = EDGE_CURVE('',#257780,#257788,#257790,.T.); +#257788 = VERTEX_POINT('',#257789); +#257789 = CARTESIAN_POINT('',(206.331683,-42.529109,1.585)); +#257790 = LINE('',#257791,#257792); +#257791 = CARTESIAN_POINT('',(206.091055,-42.529109,1.585)); +#257792 = VECTOR('',#257793,1.); +#257793 = DIRECTION('',(1.,0.,0.)); +#257794 = ORIENTED_EDGE('',*,*,#257795,.T.); +#257795 = EDGE_CURVE('',#257788,#257796,#257798,.T.); +#257796 = VERTEX_POINT('',#257797); +#257797 = CARTESIAN_POINT('',(206.464864,-42.395928,1.585)); +#257798 = CIRCLE('',#257799,0.18686440374); +#257799 = AXIS2_PLACEMENT_3D('',#257800,#257801,#257802); +#257800 = CARTESIAN_POINT('',(206.284147,-42.348392,1.585)); +#257801 = DIRECTION('',(0.,0.,1.)); +#257802 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#257803 = ORIENTED_EDGE('',*,*,#257804,.T.); +#257804 = EDGE_CURVE('',#257796,#257761,#257805,.T.); +#257805 = LINE('',#257806,#257807); +#257806 = CARTESIAN_POINT('',(206.464864,-42.395928,1.585)); +#257807 = VECTOR('',#257808,1.); +#257808 = DIRECTION('',(0.,1.,0.)); +#257809 = PLANE('',#257810); +#257810 = AXIS2_PLACEMENT_3D('',#257811,#257812,#257813); +#257811 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257812 = DIRECTION('',(0.,0.,1.)); +#257813 = DIRECTION('',(1.,0.,-0.)); +#257814 = SHELL_BASED_SURFACE_MODEL('',(#257815)); +#257815 = OPEN_SHELL('',(#257816)); +#257816 = ADVANCED_FACE('',(#257817),#257952,.T.); +#257817 = FACE_BOUND('',#257818,.F.); +#257818 = EDGE_LOOP('',(#257819,#257830,#257838,#257846,#257854,#257863, + #257871,#257879,#257888,#257896,#257904,#257913,#257921,#257929, + #257938,#257946)); +#257819 = ORIENTED_EDGE('',*,*,#257820,.T.); +#257820 = EDGE_CURVE('',#257821,#257823,#257825,.T.); +#257821 = VERTEX_POINT('',#257822); +#257822 = CARTESIAN_POINT('',(207.160548,-42.021051,1.585)); +#257823 = VERTEX_POINT('',#257824); +#257824 = CARTESIAN_POINT('',(207.277682,-42.104018,1.585)); +#257825 = CIRCLE('',#257826,7.499955990671E-02); +#257826 = AXIS2_PLACEMENT_3D('',#257827,#257828,#257829); +#257827 = CARTESIAN_POINT('',(207.20653150095,-42.08030006435,1.585)); +#257828 = DIRECTION('',(0.,0.,-1.)); +#257829 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#257830 = ORIENTED_EDGE('',*,*,#257831,.T.); +#257831 = EDGE_CURVE('',#257823,#257832,#257834,.T.); +#257832 = VERTEX_POINT('',#257833); +#257833 = CARTESIAN_POINT('',(207.072493,-42.719585,1.585)); +#257834 = LINE('',#257835,#257836); +#257835 = CARTESIAN_POINT('',(207.277682,-42.104018,1.585)); +#257836 = VECTOR('',#257837,1.); +#257837 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#257838 = ORIENTED_EDGE('',*,*,#257839,.T.); +#257839 = EDGE_CURVE('',#257832,#257840,#257842,.T.); +#257840 = VERTEX_POINT('',#257841); +#257841 = CARTESIAN_POINT('',(207.369626,-42.719585,1.585)); +#257842 = LINE('',#257843,#257844); +#257843 = CARTESIAN_POINT('',(207.072493,-42.719585,1.585)); +#257844 = VECTOR('',#257845,1.); +#257845 = DIRECTION('',(1.,0.,0.)); +#257846 = ORIENTED_EDGE('',*,*,#257847,.T.); +#257847 = EDGE_CURVE('',#257840,#257848,#257850,.T.); +#257848 = VERTEX_POINT('',#257849); +#257849 = CARTESIAN_POINT('',(207.371067,-42.44662,1.585)); +#257850 = LINE('',#257851,#257852); +#257851 = CARTESIAN_POINT('',(207.369626,-42.719585,1.585)); +#257852 = VECTOR('',#257853,1.); +#257853 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#257854 = ORIENTED_EDGE('',*,*,#257855,.T.); +#257855 = EDGE_CURVE('',#257848,#257856,#257858,.T.); +#257856 = VERTEX_POINT('',#257857); +#257857 = CARTESIAN_POINT('',(207.519626,-42.461252,1.585)); +#257858 = CIRCLE('',#257859,7.500006711463E-02); +#257859 = AXIS2_PLACEMENT_3D('',#257860,#257861,#257862); +#257860 = CARTESIAN_POINT('',(207.44462593288,-42.46125193288,1.585)); +#257861 = DIRECTION('',(0.,0.,-1.)); +#257862 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#257863 = ORIENTED_EDGE('',*,*,#257864,.T.); +#257864 = EDGE_CURVE('',#257856,#257865,#257867,.T.); +#257865 = VERTEX_POINT('',#257866); +#257866 = CARTESIAN_POINT('',(207.519626,-42.719585,1.585)); +#257867 = LINE('',#257868,#257869); +#257868 = CARTESIAN_POINT('',(207.519626,-42.461252,1.585)); +#257869 = VECTOR('',#257870,1.); +#257870 = DIRECTION('',(0.,-1.,0.)); +#257871 = ORIENTED_EDGE('',*,*,#257872,.T.); +#257872 = EDGE_CURVE('',#257865,#257873,#257875,.T.); +#257873 = VERTEX_POINT('',#257874); +#257874 = CARTESIAN_POINT('',(207.602115,-42.721026,1.585)); +#257875 = LINE('',#257876,#257877); +#257876 = CARTESIAN_POINT('',(207.519626,-42.719585,1.585)); +#257877 = VECTOR('',#257878,1.); +#257878 = DIRECTION('',(0.999847452005,-1.746633100582E-02,0.)); +#257879 = ORIENTED_EDGE('',*,*,#257880,.T.); +#257880 = EDGE_CURVE('',#257873,#257881,#257883,.T.); +#257881 = VERTEX_POINT('',#257882); +#257882 = CARTESIAN_POINT('',(207.587483,-42.869585,1.585)); +#257883 = CIRCLE('',#257884,7.500006711465E-02); +#257884 = AXIS2_PLACEMENT_3D('',#257885,#257886,#257887); +#257885 = CARTESIAN_POINT('',(207.58748306711,-42.79458493288,1.585)); +#257886 = DIRECTION('',(0.,0.,-1.)); +#257887 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#257888 = ORIENTED_EDGE('',*,*,#257889,.T.); +#257889 = EDGE_CURVE('',#257881,#257890,#257892,.T.); +#257890 = VERTEX_POINT('',#257891); +#257891 = CARTESIAN_POINT('',(207.519626,-42.869585,1.585)); +#257892 = LINE('',#257893,#257894); +#257893 = CARTESIAN_POINT('',(207.587483,-42.869585,1.585)); +#257894 = VECTOR('',#257895,1.); +#257895 = DIRECTION('',(-1.,0.,0.)); +#257896 = ORIENTED_EDGE('',*,*,#257897,.T.); +#257897 = EDGE_CURVE('',#257890,#257898,#257900,.T.); +#257898 = VERTEX_POINT('',#257899); +#257899 = CARTESIAN_POINT('',(207.518185,-43.142551,1.585)); +#257900 = LINE('',#257901,#257902); +#257901 = CARTESIAN_POINT('',(207.519626,-42.869585,1.585)); +#257902 = VECTOR('',#257903,1.); +#257903 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#257904 = ORIENTED_EDGE('',*,*,#257905,.T.); +#257905 = EDGE_CURVE('',#257898,#257906,#257908,.T.); +#257906 = VERTEX_POINT('',#257907); +#257907 = CARTESIAN_POINT('',(207.369626,-43.127919,1.585)); +#257908 = CIRCLE('',#257909,7.500006711463E-02); +#257909 = AXIS2_PLACEMENT_3D('',#257910,#257911,#257912); +#257910 = CARTESIAN_POINT('',(207.44462606711,-43.12791906711,1.585)); +#257911 = DIRECTION('',(-0.,0.,-1.)); +#257912 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#257913 = ORIENTED_EDGE('',*,*,#257914,.T.); +#257914 = EDGE_CURVE('',#257906,#257915,#257917,.T.); +#257915 = VERTEX_POINT('',#257916); +#257916 = CARTESIAN_POINT('',(207.369626,-42.869585,1.585)); +#257917 = LINE('',#257918,#257919); +#257918 = CARTESIAN_POINT('',(207.369626,-43.127919,1.585)); +#257919 = VECTOR('',#257920,1.); +#257920 = DIRECTION('',(0.,1.,0.)); +#257921 = ORIENTED_EDGE('',*,*,#257922,.T.); +#257922 = EDGE_CURVE('',#257915,#257923,#257925,.T.); +#257923 = VERTEX_POINT('',#257924); +#257924 = CARTESIAN_POINT('',(206.953804,-42.868144,1.585)); +#257925 = LINE('',#257926,#257927); +#257926 = CARTESIAN_POINT('',(207.369626,-42.869585,1.585)); +#257927 = VECTOR('',#257928,1.); +#257928 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#257929 = ORIENTED_EDGE('',*,*,#257930,.T.); +#257930 = EDGE_CURVE('',#257923,#257931,#257933,.T.); +#257931 = VERTEX_POINT('',#257932); +#257932 = CARTESIAN_POINT('',(206.897285,-42.770868,1.585)); +#257933 = CIRCLE('',#257934,7.499997045037E-02); +#257934 = AXIS2_PLACEMENT_3D('',#257935,#257936,#257937); +#257935 = CARTESIAN_POINT('',(206.96843617257,-42.79458521335,1.585)); +#257936 = DIRECTION('',(0.,0.,-1.)); +#257937 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#257938 = ORIENTED_EDGE('',*,*,#257939,.T.); +#257939 = EDGE_CURVE('',#257931,#257940,#257942,.T.); +#257940 = VERTEX_POINT('',#257941); +#257941 = CARTESIAN_POINT('',(207.141374,-42.043158,1.585)); +#257942 = LINE('',#257943,#257944); +#257943 = CARTESIAN_POINT('',(206.897285,-42.770868,1.585)); +#257944 = VECTOR('',#257945,1.); +#257945 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#257946 = ORIENTED_EDGE('',*,*,#257947,.T.); +#257947 = EDGE_CURVE('',#257940,#257821,#257948,.T.); +#257948 = LINE('',#257949,#257950); +#257949 = CARTESIAN_POINT('',(207.141374,-42.043158,1.585)); +#257950 = VECTOR('',#257951,1.); +#257951 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#257952 = PLANE('',#257953); +#257953 = AXIS2_PLACEMENT_3D('',#257954,#257955,#257956); +#257954 = CARTESIAN_POINT('',(0.,0.,1.585)); +#257955 = DIRECTION('',(0.,0.,1.)); +#257956 = DIRECTION('',(1.,0.,-0.)); +#257957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#257961)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#257958,#257959,#257960)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#257958 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#257959 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#257960 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#257961 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#257958, + 'distance_accuracy_value','confusion accuracy'); +#257962 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#257963,#257965); +#257963 = ( REPRESENTATION_RELATIONSHIP('','',#123054,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#257964) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#257964 = ITEM_DEFINED_TRANSFORMATION('','',#11,#495); +#257965 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #257966); +#257966 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('158','=>[0:1:1:69]','',#5, + #123049,$); +#257967 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#123051)); +#257968 = SHAPE_DEFINITION_REPRESENTATION(#257969,#257975); +#257969 = PRODUCT_DEFINITION_SHAPE('','',#257970); +#257970 = PRODUCT_DEFINITION('design','',#257971,#257974); +#257971 = PRODUCT_DEFINITION_FORMATION('','',#257972); +#257972 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_silkscreen', + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_silkscreen','',(#257973) + ); +#257973 = PRODUCT_CONTEXT('',#2,'mechanical'); +#257974 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#257975 = SHAPE_REPRESENTATION('',(#11,#257976,#258133,#258340,#258590, + #258741),#259282); +#257976 = SHELL_BASED_SURFACE_MODEL('',(#257977)); +#257977 = OPEN_SHELL('',(#257978)); +#257978 = ADVANCED_FACE('',(#257979),#258128,.T.); +#257979 = FACE_BOUND('',#257980,.T.); +#257980 = EDGE_LOOP('',(#257981,#257991,#257999,#258007,#258015,#258023, + #258031,#258039,#258048,#258056,#258064,#258072,#258080,#258089, + #258097,#258106,#258114,#258122)); +#257981 = ORIENTED_EDGE('',*,*,#257982,.T.); +#257982 = EDGE_CURVE('',#257983,#257985,#257987,.T.); +#257983 = VERTEX_POINT('',#257984); +#257984 = CARTESIAN_POINT('',(114.873433,-132.794831,-7.5E-02)); +#257985 = VERTEX_POINT('',#257986); +#257986 = CARTESIAN_POINT('',(114.911779,-132.77436,-7.5E-02)); +#257987 = LINE('',#257988,#257989); +#257988 = CARTESIAN_POINT('',(114.873433,-132.794831,-7.5E-02)); +#257989 = VECTOR('',#257990,1.); +#257990 = DIRECTION('',(0.882163732375,0.470942830163,0.)); +#257991 = ORIENTED_EDGE('',*,*,#257992,.T.); +#257992 = EDGE_CURVE('',#257985,#257993,#257995,.T.); +#257993 = VERTEX_POINT('',#257994); +#257994 = CARTESIAN_POINT('',(114.933695,-132.77436,-7.5E-02)); +#257995 = LINE('',#257996,#257997); +#257996 = CARTESIAN_POINT('',(114.911779,-132.77436,-7.5E-02)); +#257997 = VECTOR('',#257998,1.); +#257998 = DIRECTION('',(1.,0.,0.)); +#257999 = ORIENTED_EDGE('',*,*,#258000,.T.); +#258000 = EDGE_CURVE('',#257993,#258001,#258003,.T.); +#258001 = VERTEX_POINT('',#258002); +#258002 = CARTESIAN_POINT('',(114.968079,-132.785559,-7.5E-02)); +#258003 = LINE('',#258004,#258005); +#258004 = CARTESIAN_POINT('',(114.933695,-132.77436,-7.5E-02)); +#258005 = VECTOR('',#258006,1.); +#258006 = DIRECTION('',(0.950837159691,-0.309691291048,0.)); +#258007 = ORIENTED_EDGE('',*,*,#258008,.T.); +#258008 = EDGE_CURVE('',#258001,#258009,#258011,.T.); +#258009 = VERTEX_POINT('',#258010); +#258010 = CARTESIAN_POINT('',(114.988815,-132.806316,-7.5E-02)); +#258011 = LINE('',#258012,#258013); +#258012 = CARTESIAN_POINT('',(114.968079,-132.785559,-7.5E-02)); +#258013 = VECTOR('',#258014,1.); +#258014 = DIRECTION('',(0.706748817237,-0.707464564013,0.)); +#258015 = ORIENTED_EDGE('',*,*,#258016,.T.); +#258016 = EDGE_CURVE('',#258009,#258017,#258019,.T.); +#258017 = VERTEX_POINT('',#258018); +#258018 = CARTESIAN_POINT('',(115.079933,-132.942994,-7.5E-02)); +#258019 = LINE('',#258020,#258021); +#258020 = CARTESIAN_POINT('',(114.988815,-132.806316,-7.5E-02)); +#258021 = VECTOR('',#258022,1.); +#258022 = DIRECTION('',(0.554697386523,-0.832052167466,0.)); +#258023 = ORIENTED_EDGE('',*,*,#258024,.T.); +#258024 = EDGE_CURVE('',#258017,#258025,#258027,.T.); +#258025 = VERTEX_POINT('',#258026); +#258026 = CARTESIAN_POINT('',(115.161314,-133.024375,-7.5E-02)); +#258027 = LINE('',#258028,#258029); +#258028 = CARTESIAN_POINT('',(115.079933,-132.942994,-7.5E-02)); +#258029 = VECTOR('',#258030,1.); +#258030 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#258031 = ORIENTED_EDGE('',*,*,#258032,.T.); +#258032 = EDGE_CURVE('',#258025,#258033,#258035,.T.); +#258033 = VERTEX_POINT('',#258034); +#258034 = CARTESIAN_POINT('',(115.258109,-133.074383,-7.5E-02)); +#258035 = LINE('',#258036,#258037); +#258036 = CARTESIAN_POINT('',(115.161314,-133.024375,-7.5E-02)); +#258037 = VECTOR('',#258038,1.); +#258038 = DIRECTION('',(0.888436200035,-0.45900012905,0.)); +#258039 = ORIENTED_EDGE('',*,*,#258040,.T.); +#258040 = EDGE_CURVE('',#258033,#258041,#258043,.T.); +#258041 = VERTEX_POINT('',#258042); +#258042 = CARTESIAN_POINT('',(115.178584,-133.200715,-7.5E-02)); +#258043 = CIRCLE('',#258044,7.500029440361E-02); +#258044 = AXIS2_PLACEMENT_3D('',#258045,#258046,#258047); +#258045 = CARTESIAN_POINT('',(115.21212505397,-133.1336326486,-7.5E-02) + ); +#258046 = DIRECTION('',(0.,0.,-1.)); +#258047 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#258048 = ORIENTED_EDGE('',*,*,#258049,.T.); +#258049 = EDGE_CURVE('',#258041,#258050,#258052,.T.); +#258050 = VERTEX_POINT('',#258051); +#258051 = CARTESIAN_POINT('',(115.069604,-133.143767,-7.5E-02)); +#258052 = LINE('',#258053,#258054); +#258053 = CARTESIAN_POINT('',(115.178584,-133.200715,-7.5E-02)); +#258054 = VECTOR('',#258055,1.); +#258055 = DIRECTION('',(-0.886288266156,0.463134007901,0.)); +#258056 = ORIENTED_EDGE('',*,*,#258057,.T.); +#258057 = EDGE_CURVE('',#258050,#258058,#258060,.T.); +#258058 = VERTEX_POINT('',#258059); +#258059 = CARTESIAN_POINT('',(115.001411,-133.076604,-7.5E-02)); +#258060 = LINE('',#258061,#258062); +#258061 = CARTESIAN_POINT('',(115.069604,-133.143767,-7.5E-02)); +#258062 = VECTOR('',#258063,1.); +#258063 = DIRECTION('',(-0.712466927177,0.70170569164,0.)); +#258064 = ORIENTED_EDGE('',*,*,#258065,.T.); +#258065 = EDGE_CURVE('',#258058,#258066,#258068,.T.); +#258066 = VERTEX_POINT('',#258067); +#258067 = CARTESIAN_POINT('',(115.001411,-133.772919,-7.5E-02)); +#258068 = LINE('',#258069,#258070); +#258069 = CARTESIAN_POINT('',(115.001411,-133.076604,-7.5E-02)); +#258070 = VECTOR('',#258071,1.); +#258071 = DIRECTION('',(0.,-1.,0.)); +#258072 = ORIENTED_EDGE('',*,*,#258073,.T.); +#258073 = EDGE_CURVE('',#258066,#258074,#258076,.T.); +#258074 = VERTEX_POINT('',#258075); +#258075 = CARTESIAN_POINT('',(115.226757,-133.77436,-7.5E-02)); +#258076 = LINE('',#258077,#258078); +#258077 = CARTESIAN_POINT('',(115.001411,-133.772919,-7.5E-02)); +#258078 = VECTOR('',#258079,1.); +#258079 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#258080 = ORIENTED_EDGE('',*,*,#258081,.T.); +#258081 = EDGE_CURVE('',#258074,#258082,#258084,.T.); +#258082 = VERTEX_POINT('',#258083); +#258083 = CARTESIAN_POINT('',(115.212125,-133.922919,-7.5E-02)); +#258084 = CIRCLE('',#258085,7.500006711463E-02); +#258085 = AXIS2_PLACEMENT_3D('',#258086,#258087,#258088); +#258086 = CARTESIAN_POINT('',(115.21212506711,-133.8479189328,-7.5E-02) + ); +#258087 = DIRECTION('',(0.,0.,-1.)); +#258088 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#258089 = ORIENTED_EDGE('',*,*,#258090,.T.); +#258090 = EDGE_CURVE('',#258082,#258091,#258093,.T.); +#258091 = VERTEX_POINT('',#258092); +#258092 = CARTESIAN_POINT('',(114.626065,-133.921478,-7.5E-02)); +#258093 = LINE('',#258094,#258095); +#258094 = CARTESIAN_POINT('',(115.212125,-133.922919,-7.5E-02)); +#258095 = VECTOR('',#258096,1.); +#258096 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#258097 = ORIENTED_EDGE('',*,*,#258098,.T.); +#258098 = EDGE_CURVE('',#258091,#258099,#258101,.T.); +#258099 = VERTEX_POINT('',#258100); +#258100 = CARTESIAN_POINT('',(114.640697,-133.772919,-7.5E-02)); +#258101 = CIRCLE('',#258102,7.500006711464E-02); +#258102 = AXIS2_PLACEMENT_3D('',#258103,#258104,#258105); +#258103 = CARTESIAN_POINT('',(114.64069693288,-133.8479190671,-7.5E-02) + ); +#258104 = DIRECTION('',(0.,0.,-1.)); +#258105 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#258106 = ORIENTED_EDGE('',*,*,#258107,.T.); +#258107 = EDGE_CURVE('',#258099,#258108,#258110,.T.); +#258108 = VERTEX_POINT('',#258109); +#258109 = CARTESIAN_POINT('',(114.851411,-133.772919,-7.5E-02)); +#258110 = LINE('',#258111,#258112); +#258111 = CARTESIAN_POINT('',(114.640697,-133.772919,-7.5E-02)); +#258112 = VECTOR('',#258113,1.); +#258113 = DIRECTION('',(1.,0.,0.)); +#258114 = ORIENTED_EDGE('',*,*,#258115,.T.); +#258115 = EDGE_CURVE('',#258108,#258116,#258118,.T.); +#258116 = VERTEX_POINT('',#258117); +#258117 = CARTESIAN_POINT('',(114.852852,-132.833287,-7.5E-02)); +#258118 = LINE('',#258119,#258120); +#258119 = CARTESIAN_POINT('',(114.851411,-133.772919,-7.5E-02)); +#258120 = VECTOR('',#258121,1.); +#258121 = DIRECTION('',(1.533577299926E-03,0.99999882407,0.)); +#258122 = ORIENTED_EDGE('',*,*,#258123,.T.); +#258123 = EDGE_CURVE('',#258116,#257983,#258124,.T.); +#258124 = LINE('',#258125,#258126); +#258125 = CARTESIAN_POINT('',(114.852852,-132.833287,-7.5E-02)); +#258126 = VECTOR('',#258127,1.); +#258127 = DIRECTION('',(0.471857451169,0.881674852639,0.)); +#258128 = PLANE('',#258129); +#258129 = AXIS2_PLACEMENT_3D('',#258130,#258131,#258132); +#258130 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258131 = DIRECTION('',(-0.,-0.,-1.)); +#258132 = DIRECTION('',(-1.,0.,0.)); +#258133 = SHELL_BASED_SURFACE_MODEL('',(#258134)); +#258134 = OPEN_SHELL('',(#258135)); +#258135 = ADVANCED_FACE('',(#258136,#258252),#258335,.T.); +#258136 = FACE_BOUND('',#258137,.T.); +#258137 = EDGE_LOOP('',(#258138,#258148,#258156,#258164,#258173,#258181, + #258190,#258198,#258206,#258214,#258222,#258230,#258238,#258246)); +#258138 = ORIENTED_EDGE('',*,*,#258139,.T.); +#258139 = EDGE_CURVE('',#258140,#258142,#258144,.T.); +#258140 = VERTEX_POINT('',#258141); +#258141 = CARTESIAN_POINT('',(115.630564,-132.943492,-7.5E-02)); +#258142 = VERTEX_POINT('',#258143); +#258143 = CARTESIAN_POINT('',(115.746411,-132.830381,-7.5E-02)); +#258144 = LINE('',#258145,#258146); +#258145 = CARTESIAN_POINT('',(115.630564,-132.943492,-7.5E-02)); +#258146 = VECTOR('',#258147,1.); +#258147 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#258148 = ORIENTED_EDGE('',*,*,#258149,.T.); +#258149 = EDGE_CURVE('',#258142,#258150,#258152,.T.); +#258150 = VERTEX_POINT('',#258151); +#258151 = CARTESIAN_POINT('',(115.919004,-132.773648,-7.5E-02)); +#258152 = LINE('',#258153,#258154); +#258153 = CARTESIAN_POINT('',(115.746411,-132.830381,-7.5E-02)); +#258154 = VECTOR('',#258155,1.); +#258155 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#258156 = ORIENTED_EDGE('',*,*,#258157,.T.); +#258157 = EDGE_CURVE('',#258150,#258158,#258160,.T.); +#258158 = VERTEX_POINT('',#258159); +#258159 = CARTESIAN_POINT('',(116.179138,-132.77436,-7.5E-02)); +#258160 = LINE('',#258161,#258162); +#258161 = CARTESIAN_POINT('',(115.919004,-132.773648,-7.5E-02)); +#258162 = VECTOR('',#258163,1.); +#258163 = DIRECTION('',(0.999996254297,-2.737040652328E-03,0.)); +#258164 = ORIENTED_EDGE('',*,*,#258165,.T.); +#258165 = EDGE_CURVE('',#258158,#258166,#258168,.T.); +#258166 = VERTEX_POINT('',#258167); +#258167 = CARTESIAN_POINT('',(116.239506,-132.847919,-7.5E-02)); +#258168 = CIRCLE('',#258169,7.500074938985E-02); +#258169 = AXIS2_PLACEMENT_3D('',#258170,#258171,#258172); +#258170 = CARTESIAN_POINT('',(116.16450525061,-132.8479194661,-7.5E-02) + ); +#258171 = DIRECTION('',(0.,0.,-1.)); +#258172 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#258173 = ORIENTED_EDGE('',*,*,#258174,.T.); +#258174 = EDGE_CURVE('',#258166,#258175,#258177,.T.); +#258175 = VERTEX_POINT('',#258176); +#258176 = CARTESIAN_POINT('',(116.238065,-133.862551,-7.5E-02)); +#258177 = LINE('',#258178,#258179); +#258178 = CARTESIAN_POINT('',(116.239506,-132.847919,-7.5E-02)); +#258179 = VECTOR('',#258180,1.); +#258180 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#258181 = ORIENTED_EDGE('',*,*,#258182,.T.); +#258182 = EDGE_CURVE('',#258175,#258183,#258185,.T.); +#258183 = VERTEX_POINT('',#258184); +#258184 = CARTESIAN_POINT('',(116.164506,-133.922919,-7.5E-02)); +#258185 = CIRCLE('',#258186,7.500074938986E-02); +#258186 = AXIS2_PLACEMENT_3D('',#258187,#258188,#258189); +#258187 = CARTESIAN_POINT('',(116.16450553389,-133.8479182506,-7.5E-02) + ); +#258188 = DIRECTION('',(0.,0.,-1.)); +#258189 = DIRECTION('',(0.980783081614,-0.195101375752,0.)); +#258190 = ORIENTED_EDGE('',*,*,#258191,.T.); +#258191 = EDGE_CURVE('',#258183,#258192,#258194,.T.); +#258192 = VERTEX_POINT('',#258193); +#258193 = CARTESIAN_POINT('',(115.909948,-133.920719,-7.5E-02)); +#258194 = LINE('',#258195,#258196); +#258195 = CARTESIAN_POINT('',(116.164506,-133.922919,-7.5E-02)); +#258196 = VECTOR('',#258197,1.); +#258197 = DIRECTION('',(-0.999962656283,8.642108454025E-03,0.)); +#258198 = ORIENTED_EDGE('',*,*,#258199,.T.); +#258199 = EDGE_CURVE('',#258192,#258200,#258202,.T.); +#258200 = VERTEX_POINT('',#258201); +#258201 = CARTESIAN_POINT('',(115.741886,-133.862661,-7.5E-02)); +#258202 = LINE('',#258203,#258204); +#258203 = CARTESIAN_POINT('',(115.909948,-133.920719,-7.5E-02)); +#258204 = VECTOR('',#258205,1.); +#258205 = DIRECTION('',(-0.945189826766,0.32652134904,0.)); +#258206 = ORIENTED_EDGE('',*,*,#258207,.T.); +#258207 = EDGE_CURVE('',#258200,#258208,#258210,.T.); +#258208 = VERTEX_POINT('',#258209); +#258209 = CARTESIAN_POINT('',(115.625197,-133.744898,-7.5E-02)); +#258210 = LINE('',#258211,#258212); +#258211 = CARTESIAN_POINT('',(115.741886,-133.862661,-7.5E-02)); +#258212 = VECTOR('',#258213,1.); +#258213 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#258214 = ORIENTED_EDGE('',*,*,#258215,.T.); +#258215 = EDGE_CURVE('',#258208,#258216,#258218,.T.); +#258216 = VERTEX_POINT('',#258217); +#258217 = CARTESIAN_POINT('',(115.567936,-133.628013,-7.5E-02)); +#258218 = LINE('',#258219,#258220); +#258219 = CARTESIAN_POINT('',(115.625197,-133.744898,-7.5E-02)); +#258220 = VECTOR('',#258221,1.); +#258221 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#258222 = ORIENTED_EDGE('',*,*,#258223,.T.); +#258223 = EDGE_CURVE('',#258216,#258224,#258226,.T.); +#258224 = VERTEX_POINT('',#258225); +#258225 = CARTESIAN_POINT('',(115.518078,-133.419347,-7.5E-02)); +#258226 = LINE('',#258227,#258228); +#258227 = CARTESIAN_POINT('',(115.567936,-133.628013,-7.5E-02)); +#258228 = VECTOR('',#258229,1.); +#258229 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#258230 = ORIENTED_EDGE('',*,*,#258231,.T.); +#258231 = EDGE_CURVE('',#258224,#258232,#258234,.T.); +#258232 = VERTEX_POINT('',#258233); +#258233 = CARTESIAN_POINT('',(115.520317,-133.2583,-7.5E-02)); +#258234 = LINE('',#258235,#258236); +#258235 = CARTESIAN_POINT('',(115.518078,-133.419347,-7.5E-02)); +#258236 = VECTOR('',#258237,1.); +#258237 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#258238 = ORIENTED_EDGE('',*,*,#258239,.T.); +#258239 = EDGE_CURVE('',#258232,#258240,#258242,.T.); +#258240 = VERTEX_POINT('',#258241); +#258241 = CARTESIAN_POINT('',(115.573615,-133.052473,-7.5E-02)); +#258242 = LINE('',#258243,#258244); +#258243 = CARTESIAN_POINT('',(115.520317,-133.2583,-7.5E-02)); +#258244 = VECTOR('',#258245,1.); +#258245 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#258246 = ORIENTED_EDGE('',*,*,#258247,.T.); +#258247 = EDGE_CURVE('',#258240,#258140,#258248,.T.); +#258248 = LINE('',#258249,#258250); +#258249 = CARTESIAN_POINT('',(115.573615,-133.052473,-7.5E-02)); +#258250 = VECTOR('',#258251,1.); +#258251 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#258252 = FACE_BOUND('',#258253,.T.); +#258253 = EDGE_LOOP('',(#258254,#258264,#258272,#258280,#258288,#258297, + #258305,#258313,#258321,#258329)); +#258254 = ORIENTED_EDGE('',*,*,#258255,.T.); +#258255 = EDGE_CURVE('',#258256,#258258,#258260,.T.); +#258256 = VERTEX_POINT('',#258257); +#258257 = CARTESIAN_POINT('',(116.089506,-133.772919,-7.5E-02)); +#258258 = VERTEX_POINT('',#258259); +#258259 = CARTESIAN_POINT('',(116.089506,-132.922919,-7.5E-02)); +#258260 = LINE('',#258261,#258262); +#258261 = CARTESIAN_POINT('',(116.089506,-133.772919,-7.5E-02)); +#258262 = VECTOR('',#258263,1.); +#258263 = DIRECTION('',(0.,1.,0.)); +#258264 = ORIENTED_EDGE('',*,*,#258265,.T.); +#258265 = EDGE_CURVE('',#258258,#258266,#258268,.T.); +#258266 = VERTEX_POINT('',#258267); +#258267 = CARTESIAN_POINT('',(115.938581,-132.922919,-7.5E-02)); +#258268 = LINE('',#258269,#258270); +#258269 = CARTESIAN_POINT('',(116.089506,-132.922919,-7.5E-02)); +#258270 = VECTOR('',#258271,1.); +#258271 = DIRECTION('',(-1.,0.,0.)); +#258272 = ORIENTED_EDGE('',*,*,#258273,.T.); +#258273 = EDGE_CURVE('',#258266,#258274,#258276,.T.); +#258274 = VERTEX_POINT('',#258275); +#258275 = CARTESIAN_POINT('',(115.824068,-132.96109,-7.5E-02)); +#258276 = LINE('',#258277,#258278); +#258277 = CARTESIAN_POINT('',(115.938581,-132.922919,-7.5E-02)); +#258278 = VECTOR('',#258279,1.); +#258279 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#258280 = ORIENTED_EDGE('',*,*,#258281,.T.); +#258281 = EDGE_CURVE('',#258274,#258282,#258284,.T.); +#258282 = VERTEX_POINT('',#258283); +#258283 = CARTESIAN_POINT('',(115.749955,-133.035203,-7.5E-02)); +#258284 = LINE('',#258285,#258286); +#258285 = CARTESIAN_POINT('',(115.824068,-132.96109,-7.5E-02)); +#258286 = VECTOR('',#258287,1.); +#258287 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#258288 = ORIENTED_EDGE('',*,*,#258289,.T.); +#258289 = EDGE_CURVE('',#258282,#258290,#258292,.T.); +#258290 = VERTEX_POINT('',#258291); +#258291 = CARTESIAN_POINT('',(115.668078,-133.410113,-7.5E-02)); +#258292 = CIRCLE('',#258293,0.611712714363); +#258293 = AXIS2_PLACEMENT_3D('',#258294,#258295,#258296); +#258294 = CARTESIAN_POINT('',(116.27648327521,-133.3465876822,-7.5E-02) + ); +#258295 = DIRECTION('',(0.,0.,1.)); +#258296 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#258297 = ORIENTED_EDGE('',*,*,#258298,.T.); +#258298 = EDGE_CURVE('',#258290,#258299,#258301,.T.); +#258299 = VERTEX_POINT('',#258300); +#258300 = CARTESIAN_POINT('',(115.711461,-133.583647,-7.5E-02)); +#258301 = LINE('',#258302,#258303); +#258302 = CARTESIAN_POINT('',(115.668078,-133.410113,-7.5E-02)); +#258303 = VECTOR('',#258304,1.); +#258304 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#258305 = ORIENTED_EDGE('',*,*,#258306,.T.); +#258306 = EDGE_CURVE('',#258299,#258307,#258309,.T.); +#258307 = VERTEX_POINT('',#258308); +#258308 = CARTESIAN_POINT('',(115.749955,-133.660634,-7.5E-02)); +#258309 = LINE('',#258310,#258311); +#258310 = CARTESIAN_POINT('',(115.711461,-133.583647,-7.5E-02)); +#258311 = VECTOR('',#258312,1.); +#258312 = DIRECTION('',(0.447218242642,-0.894424867414,0.)); +#258313 = ORIENTED_EDGE('',*,*,#258314,.T.); +#258314 = EDGE_CURVE('',#258307,#258315,#258317,.T.); +#258315 = VERTEX_POINT('',#258316); +#258316 = CARTESIAN_POINT('',(115.824068,-133.734748,-7.5E-02)); +#258317 = LINE('',#258318,#258319); +#258318 = CARTESIAN_POINT('',(115.749955,-133.660634,-7.5E-02)); +#258319 = VECTOR('',#258320,1.); +#258320 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#258321 = ORIENTED_EDGE('',*,*,#258322,.T.); +#258322 = EDGE_CURVE('',#258315,#258323,#258325,.T.); +#258323 = VERTEX_POINT('',#258324); +#258324 = CARTESIAN_POINT('',(115.938581,-133.772919,-7.5E-02)); +#258325 = LINE('',#258326,#258327); +#258326 = CARTESIAN_POINT('',(115.824068,-133.734748,-7.5E-02)); +#258327 = VECTOR('',#258328,1.); +#258328 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#258329 = ORIENTED_EDGE('',*,*,#258330,.T.); +#258330 = EDGE_CURVE('',#258323,#258256,#258331,.T.); +#258331 = LINE('',#258332,#258333); +#258332 = CARTESIAN_POINT('',(115.938581,-133.772919,-7.5E-02)); +#258333 = VECTOR('',#258334,1.); +#258334 = DIRECTION('',(1.,0.,0.)); +#258335 = PLANE('',#258336); +#258336 = AXIS2_PLACEMENT_3D('',#258337,#258338,#258339); +#258337 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258338 = DIRECTION('',(-0.,-0.,-1.)); +#258339 = DIRECTION('',(-1.,0.,0.)); +#258340 = SHELL_BASED_SURFACE_MODEL('',(#258341)); +#258341 = OPEN_SHELL('',(#258342)); +#258342 = ADVANCED_FACE('',(#258343,#258515),#258585,.T.); +#258343 = FACE_BOUND('',#258344,.T.); +#258344 = EDGE_LOOP('',(#258345,#258355,#258363,#258371,#258379,#258387, + #258395,#258403,#258411,#258419,#258427,#258436,#258444,#258452, + #258460,#258468,#258476,#258484,#258492,#258500,#258509)); +#258345 = ORIENTED_EDGE('',*,*,#258346,.T.); +#258346 = EDGE_CURVE('',#258347,#258349,#258351,.T.); +#258347 = VERTEX_POINT('',#258348); +#258348 = CARTESIAN_POINT('',(116.788768,-132.787747,-7.5E-02)); +#258349 = VERTEX_POINT('',#258350); +#258350 = CARTESIAN_POINT('',(116.816541,-132.77436,-7.5E-02)); +#258351 = LINE('',#258352,#258353); +#258352 = CARTESIAN_POINT('',(116.788768,-132.787747,-7.5E-02)); +#258353 = VECTOR('',#258354,1.); +#258354 = DIRECTION('',(0.900813766444,0.434205663464,0.)); +#258355 = ORIENTED_EDGE('',*,*,#258356,.T.); +#258356 = EDGE_CURVE('',#258349,#258357,#258359,.T.); +#258357 = VERTEX_POINT('',#258358); +#258358 = CARTESIAN_POINT('',(117.036281,-132.77436,-7.5E-02)); +#258359 = LINE('',#258360,#258361); +#258360 = CARTESIAN_POINT('',(116.816541,-132.77436,-7.5E-02)); +#258361 = VECTOR('',#258362,1.); +#258362 = DIRECTION('',(1.,0.,0.)); +#258363 = ORIENTED_EDGE('',*,*,#258364,.T.); +#258364 = EDGE_CURVE('',#258357,#258365,#258367,.T.); +#258365 = VERTEX_POINT('',#258366); +#258366 = CARTESIAN_POINT('',(117.16417,-132.837786,-7.5E-02)); +#258367 = LINE('',#258368,#258369); +#258368 = CARTESIAN_POINT('',(117.036281,-132.77436,-7.5E-02)); +#258369 = VECTOR('',#258370,1.); +#258370 = DIRECTION('',(0.895875328998,-0.444305519764,0.)); +#258371 = ORIENTED_EDGE('',*,*,#258372,.T.); +#258372 = EDGE_CURVE('',#258365,#258373,#258375,.T.); +#258373 = VERTEX_POINT('',#258374); +#258374 = CARTESIAN_POINT('',(117.274486,-132.949108,-7.5E-02)); +#258375 = LINE('',#258376,#258377); +#258376 = CARTESIAN_POINT('',(117.16417,-132.837786,-7.5E-02)); +#258377 = VECTOR('',#258378,1.); +#258378 = DIRECTION('',(0.703890020283,-0.710308974564,0.)); +#258379 = ORIENTED_EDGE('',*,*,#258380,.T.); +#258380 = EDGE_CURVE('',#258373,#258381,#258383,.T.); +#258381 = VERTEX_POINT('',#258382); +#258382 = CARTESIAN_POINT('',(117.284886,-132.972586,-7.5E-02)); +#258383 = LINE('',#258384,#258385); +#258384 = CARTESIAN_POINT('',(117.274486,-132.949108,-7.5E-02)); +#258385 = VECTOR('',#258386,1.); +#258386 = DIRECTION('',(0.40501080732,-0.914311897524,0.)); +#258387 = ORIENTED_EDGE('',*,*,#258388,.T.); +#258388 = EDGE_CURVE('',#258381,#258389,#258391,.T.); +#258389 = VERTEX_POINT('',#258390); +#258390 = CARTESIAN_POINT('',(117.334744,-133.181252,-7.5E-02)); +#258391 = LINE('',#258392,#258393); +#258392 = CARTESIAN_POINT('',(117.284886,-132.972586,-7.5E-02)); +#258393 = VECTOR('',#258394,1.); +#258394 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#258395 = ORIENTED_EDGE('',*,*,#258396,.T.); +#258396 = EDGE_CURVE('',#258389,#258397,#258399,.T.); +#258397 = VERTEX_POINT('',#258398); +#258398 = CARTESIAN_POINT('',(117.332505,-133.532775,-7.5E-02)); +#258399 = LINE('',#258400,#258401); +#258400 = CARTESIAN_POINT('',(117.334744,-133.181252,-7.5E-02)); +#258401 = VECTOR('',#258402,1.); +#258402 = DIRECTION('',(-6.369297552994E-03,-0.999979715819,0.)); +#258403 = ORIENTED_EDGE('',*,*,#258404,.T.); +#258404 = EDGE_CURVE('',#258397,#258405,#258407,.T.); +#258405 = VERTEX_POINT('',#258406); +#258406 = CARTESIAN_POINT('',(117.279939,-133.737097,-7.5E-02)); +#258407 = LINE('',#258408,#258409); +#258408 = CARTESIAN_POINT('',(117.332505,-133.532775,-7.5E-02)); +#258409 = VECTOR('',#258410,1.); +#258410 = DIRECTION('',(-0.249156885796,-0.968463136242,0.)); +#258411 = ORIENTED_EDGE('',*,*,#258412,.T.); +#258412 = EDGE_CURVE('',#258405,#258413,#258415,.T.); +#258413 = VERTEX_POINT('',#258414); +#258414 = CARTESIAN_POINT('',(117.265159,-133.758093,-7.5E-02)); +#258415 = LINE('',#258416,#258417); +#258416 = CARTESIAN_POINT('',(117.279939,-133.737097,-7.5E-02)); +#258417 = VECTOR('',#258418,1.); +#258418 = DIRECTION('',(-0.575624600959,-0.817714081309,0.)); +#258419 = ORIENTED_EDGE('',*,*,#258420,.T.); +#258420 = EDGE_CURVE('',#258413,#258421,#258423,.T.); +#258421 = VERTEX_POINT('',#258422); +#258422 = CARTESIAN_POINT('',(117.156727,-133.863417,-7.5E-02)); +#258423 = LINE('',#258424,#258425); +#258424 = CARTESIAN_POINT('',(117.265159,-133.758093,-7.5E-02)); +#258425 = VECTOR('',#258426,1.); +#258426 = DIRECTION('',(-0.717312253834,-0.696751842839,0.)); +#258427 = ORIENTED_EDGE('',*,*,#258428,.T.); +#258428 = EDGE_CURVE('',#258421,#258429,#258431,.T.); +#258429 = VERTEX_POINT('',#258430); +#258430 = CARTESIAN_POINT('',(116.688652,-133.858053,-7.5E-02)); +#258431 = CIRCLE('',#258432,0.397466426085); +#258432 = AXIS2_PLACEMENT_3D('',#258433,#258434,#258435); +#258433 = CARTESIAN_POINT('',(116.92637063855,-133.5395103674,-7.5E-02) + ); +#258434 = DIRECTION('',(-0.,0.,-1.)); +#258435 = DIRECTION('',(0.579561810326,-0.814928283968,-0.)); +#258436 = ORIENTED_EDGE('',*,*,#258437,.T.); +#258437 = EDGE_CURVE('',#258429,#258438,#258440,.T.); +#258438 = VERTEX_POINT('',#258439); +#258439 = CARTESIAN_POINT('',(116.578336,-133.746728,-7.5E-02)); +#258440 = LINE('',#258441,#258442); +#258441 = CARTESIAN_POINT('',(116.688652,-133.858053,-7.5E-02)); +#258442 = VECTOR('',#258443,1.); +#258443 = DIRECTION('',(-0.703880449738,0.710318458493,0.)); +#258444 = ORIENTED_EDGE('',*,*,#258445,.T.); +#258445 = EDGE_CURVE('',#258438,#258446,#258448,.T.); +#258446 = VERTEX_POINT('',#258447); +#258447 = CARTESIAN_POINT('',(116.567936,-133.723251,-7.5E-02)); +#258448 = LINE('',#258449,#258450); +#258449 = CARTESIAN_POINT('',(116.578336,-133.746728,-7.5E-02)); +#258450 = VECTOR('',#258451,1.); +#258451 = DIRECTION('',(-0.405025228745,0.91430550916,0.)); +#258452 = ORIENTED_EDGE('',*,*,#258453,.T.); +#258453 = EDGE_CURVE('',#258446,#258454,#258456,.T.); +#258454 = VERTEX_POINT('',#258455); +#258455 = CARTESIAN_POINT('',(116.518078,-133.514585,-7.5E-02)); +#258456 = LINE('',#258457,#258458); +#258457 = CARTESIAN_POINT('',(116.567936,-133.723251,-7.5E-02)); +#258458 = VECTOR('',#258459,1.); +#258459 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#258460 = ORIENTED_EDGE('',*,*,#258461,.T.); +#258461 = EDGE_CURVE('',#258454,#258462,#258464,.T.); +#258462 = VERTEX_POINT('',#258463); +#258463 = CARTESIAN_POINT('',(116.520317,-133.163062,-7.5E-02)); +#258464 = LINE('',#258465,#258466); +#258465 = CARTESIAN_POINT('',(116.518078,-133.514585,-7.5E-02)); +#258466 = VECTOR('',#258467,1.); +#258467 = DIRECTION('',(6.369297552993E-03,0.999979715819,0.)); +#258468 = ORIENTED_EDGE('',*,*,#258469,.T.); +#258469 = EDGE_CURVE('',#258462,#258470,#258472,.T.); +#258470 = VERTEX_POINT('',#258471); +#258471 = CARTESIAN_POINT('',(116.572883,-132.95874,-7.5E-02)); +#258472 = LINE('',#258473,#258474); +#258473 = CARTESIAN_POINT('',(116.520317,-133.163062,-7.5E-02)); +#258474 = VECTOR('',#258475,1.); +#258475 = DIRECTION('',(0.249156885796,0.968463136242,0.)); +#258476 = ORIENTED_EDGE('',*,*,#258477,.T.); +#258477 = EDGE_CURVE('',#258470,#258478,#258480,.T.); +#258478 = VERTEX_POINT('',#258479); +#258479 = CARTESIAN_POINT('',(116.587664,-132.937743,-7.5E-02)); +#258480 = LINE('',#258481,#258482); +#258481 = CARTESIAN_POINT('',(116.572883,-132.95874,-7.5E-02)); +#258482 = VECTOR('',#258483,1.); +#258483 = DIRECTION('',(0.575632310301,0.817708654312,0.)); +#258484 = ORIENTED_EDGE('',*,*,#258485,.T.); +#258485 = EDGE_CURVE('',#258478,#258486,#258488,.T.); +#258486 = VERTEX_POINT('',#258487); +#258487 = CARTESIAN_POINT('',(116.607703,-132.918278,-7.5E-02)); +#258488 = LINE('',#258489,#258490); +#258489 = CARTESIAN_POINT('',(116.587664,-132.937743,-7.5E-02)); +#258490 = VECTOR('',#258491,1.); +#258491 = DIRECTION('',(0.717305448961,0.696758848448,0.)); +#258492 = ORIENTED_EDGE('',*,*,#258493,.T.); +#258493 = EDGE_CURVE('',#258486,#258494,#258496,.T.); +#258494 = VERTEX_POINT('',#258495); +#258495 = CARTESIAN_POINT('',(116.612386,-132.920218,-7.5E-02)); +#258496 = LINE('',#258497,#258498); +#258497 = CARTESIAN_POINT('',(116.607703,-132.918278,-7.5E-02)); +#258498 = VECTOR('',#258499,1.); +#258499 = DIRECTION('',(0.923862939217,-0.382723489664,0.)); +#258500 = ORIENTED_EDGE('',*,*,#258501,.T.); +#258501 = EDGE_CURVE('',#258494,#258502,#258504,.T.); +#258502 = VERTEX_POINT('',#258503); +#258503 = CARTESIAN_POINT('',(116.788768,-132.802364,-7.5E-02)); +#258504 = CIRCLE('',#258505,0.150000292066); +#258505 = AXIS2_PLACEMENT_3D('',#258506,#258507,#258508); +#258506 = CARTESIAN_POINT('',(116.64165,-132.7731,-7.5E-02)); +#258507 = DIRECTION('',(0.,0.,1.)); +#258508 = DIRECTION('',(-0.195092953466,-0.980784756972,0.)); +#258509 = ORIENTED_EDGE('',*,*,#258510,.T.); +#258510 = EDGE_CURVE('',#258502,#258347,#258511,.T.); +#258511 = LINE('',#258512,#258513); +#258512 = CARTESIAN_POINT('',(116.788768,-132.802364,-7.5E-02)); +#258513 = VECTOR('',#258514,1.); +#258514 = DIRECTION('',(0.,1.,0.)); +#258515 = FACE_BOUND('',#258516,.T.); +#258516 = EDGE_LOOP('',(#258517,#258528,#258536,#258545,#258553,#258562, + #258570,#258579)); +#258517 = ORIENTED_EDGE('',*,*,#258518,.T.); +#258518 = EDGE_CURVE('',#258519,#258521,#258523,.T.); +#258519 = VERTEX_POINT('',#258520); +#258520 = CARTESIAN_POINT('',(117.07246,-132.957177,-7.5E-02)); +#258521 = VERTEX_POINT('',#258522); +#258522 = CARTESIAN_POINT('',(116.780362,-132.957177,-7.5E-02)); +#258523 = CIRCLE('',#258524,0.252889603602); +#258524 = AXIS2_PLACEMENT_3D('',#258525,#258526,#258527); +#258525 = CARTESIAN_POINT('',(116.926411,-133.16363,-7.5E-02)); +#258526 = DIRECTION('',(0.,0.,1.)); +#258527 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#258528 = ORIENTED_EDGE('',*,*,#258529,.T.); +#258529 = EDGE_CURVE('',#258521,#258530,#258532,.T.); +#258530 = VERTEX_POINT('',#258531); +#258531 = CARTESIAN_POINT('',(116.708419,-133.029119,-7.5E-02)); +#258532 = LINE('',#258533,#258534); +#258533 = CARTESIAN_POINT('',(116.780362,-132.957177,-7.5E-02)); +#258534 = VECTOR('',#258535,1.); +#258535 = DIRECTION('',(-0.707111695558,-0.707101866781,0.)); +#258536 = ORIENTED_EDGE('',*,*,#258537,.T.); +#258537 = EDGE_CURVE('',#258530,#258538,#258540,.T.); +#258538 = VERTEX_POINT('',#258539); +#258539 = CARTESIAN_POINT('',(116.708419,-133.666717,-7.5E-02)); +#258540 = CIRCLE('',#258541,0.985308713638); +#258541 = AXIS2_PLACEMENT_3D('',#258542,#258543,#258544); +#258542 = CARTESIAN_POINT('',(117.6407282077,-133.347918,-7.5E-02)); +#258543 = DIRECTION('',(0.,0.,1.)); +#258544 = DIRECTION('',(-0.946210253497,0.323552400976,0.)); +#258545 = ORIENTED_EDGE('',*,*,#258546,.T.); +#258546 = EDGE_CURVE('',#258538,#258547,#258549,.T.); +#258547 = VERTEX_POINT('',#258548); +#258548 = CARTESIAN_POINT('',(116.780362,-133.738661,-7.5E-02)); +#258549 = LINE('',#258550,#258551); +#258550 = CARTESIAN_POINT('',(116.708419,-133.666717,-7.5E-02)); +#258551 = VECTOR('',#258552,1.); +#258552 = DIRECTION('',(0.707101866849,-0.70711169549,0.)); +#258553 = ORIENTED_EDGE('',*,*,#258554,.T.); +#258554 = EDGE_CURVE('',#258547,#258555,#258557,.T.); +#258555 = VERTEX_POINT('',#258556); +#258556 = CARTESIAN_POINT('',(117.072459,-133.738661,-7.5E-02)); +#258557 = CIRCLE('',#258558,0.252888498466); +#258558 = AXIS2_PLACEMENT_3D('',#258559,#258560,#258561); +#258559 = CARTESIAN_POINT('',(116.9264105,-133.532209,-7.5E-02)); +#258560 = DIRECTION('',(0.,0.,1.)); +#258561 = DIRECTION('',(-0.577521322188,-0.816375601313,0.)); +#258562 = ORIENTED_EDGE('',*,*,#258563,.T.); +#258563 = EDGE_CURVE('',#258555,#258564,#258566,.T.); +#258564 = VERTEX_POINT('',#258565); +#258565 = CARTESIAN_POINT('',(117.144402,-133.666717,-7.5E-02)); +#258566 = LINE('',#258567,#258568); +#258567 = CARTESIAN_POINT('',(117.072459,-133.738661,-7.5E-02)); +#258568 = VECTOR('',#258569,1.); +#258569 = DIRECTION('',(0.707101866849,0.70711169549,0.)); +#258570 = ORIENTED_EDGE('',*,*,#258571,.T.); +#258571 = EDGE_CURVE('',#258564,#258572,#258574,.T.); +#258572 = VERTEX_POINT('',#258573); +#258573 = CARTESIAN_POINT('',(117.144402,-133.029119,-7.5E-02)); +#258574 = CIRCLE('',#258575,0.985282207896); +#258575 = AXIS2_PLACEMENT_3D('',#258576,#258577,#258578); +#258576 = CARTESIAN_POINT('',(116.21212080486,-133.347918,-7.5E-02)); +#258577 = DIRECTION('',(0.,-0.,1.)); +#258578 = DIRECTION('',(0.946207277123,-0.323561105077,-0.)); +#258579 = ORIENTED_EDGE('',*,*,#258580,.T.); +#258580 = EDGE_CURVE('',#258572,#258519,#258581,.T.); +#258581 = LINE('',#258582,#258583); +#258582 = CARTESIAN_POINT('',(117.144402,-133.029119,-7.5E-02)); +#258583 = VECTOR('',#258584,1.); +#258584 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#258585 = PLANE('',#258586); +#258586 = AXIS2_PLACEMENT_3D('',#258587,#258588,#258589); +#258587 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258588 = DIRECTION('',(-0.,-0.,-1.)); +#258589 = DIRECTION('',(-1.,0.,0.)); +#258590 = SHELL_BASED_SURFACE_MODEL('',(#258591)); +#258591 = OPEN_SHELL('',(#258592)); +#258592 = ADVANCED_FACE('',(#258593),#258736,.T.); +#258593 = FACE_BOUND('',#258594,.T.); +#258594 = EDGE_LOOP('',(#258595,#258605,#258613,#258621,#258630,#258638, + #258646,#258655,#258663,#258671,#258680,#258688,#258696,#258705, + #258713,#258722,#258730)); +#258595 = ORIENTED_EDGE('',*,*,#258596,.T.); +#258596 = EDGE_CURVE('',#258597,#258599,#258601,.T.); +#258597 = VERTEX_POINT('',#258598); +#258598 = CARTESIAN_POINT('',(118.294512,-132.803552,-7.5E-02)); +#258599 = VERTEX_POINT('',#258600); +#258600 = CARTESIAN_POINT('',(118.316093,-132.783789,-7.5E-02)); +#258601 = LINE('',#258602,#258603); +#258602 = CARTESIAN_POINT('',(118.294512,-132.803552,-7.5E-02)); +#258603 = VECTOR('',#258604,1.); +#258604 = DIRECTION('',(0.737487398394,0.675360894048,0.)); +#258605 = ORIENTED_EDGE('',*,*,#258606,.T.); +#258606 = EDGE_CURVE('',#258599,#258607,#258609,.T.); +#258607 = VERTEX_POINT('',#258608); +#258608 = CARTESIAN_POINT('',(118.343594,-132.773788,-7.5E-02)); +#258609 = LINE('',#258610,#258611); +#258610 = CARTESIAN_POINT('',(118.316093,-132.783789,-7.5E-02)); +#258611 = VECTOR('',#258612,1.); +#258612 = DIRECTION('',(0.939786439068,0.341762269631,0.)); +#258613 = ORIENTED_EDGE('',*,*,#258614,.T.); +#258614 = EDGE_CURVE('',#258607,#258615,#258617,.T.); +#258615 = VERTEX_POINT('',#258616); +#258616 = CARTESIAN_POINT('',(118.356608,-132.77436,-7.5E-02)); +#258617 = LINE('',#258618,#258619); +#258618 = CARTESIAN_POINT('',(118.343594,-132.773788,-7.5E-02)); +#258619 = VECTOR('',#258620,1.); +#258620 = DIRECTION('',(0.999035478808,-4.391027308159E-02,0.)); +#258621 = ORIENTED_EDGE('',*,*,#258622,.T.); +#258622 = EDGE_CURVE('',#258615,#258623,#258625,.T.); +#258623 = VERTEX_POINT('',#258624); +#258624 = CARTESIAN_POINT('',(118.423559,-132.82126,-7.5E-02)); +#258625 = CIRCLE('',#258626,7.357142838944E-02); +#258626 = AXIS2_PLACEMENT_3D('',#258627,#258628,#258629); +#258627 = CARTESIAN_POINT('',(118.35498535861,-132.8479135322,-7.5E-02) + ); +#258628 = DIRECTION('',(0.,0.,-1.)); +#258629 = DIRECTION('',(2.205531982089E-02,0.999756751849,0.)); +#258630 = ORIENTED_EDGE('',*,*,#258631,.T.); +#258631 = EDGE_CURVE('',#258623,#258632,#258634,.T.); +#258632 = VERTEX_POINT('',#258633); +#258633 = CARTESIAN_POINT('',(118.429982,-132.847919,-7.5E-02)); +#258634 = LINE('',#258635,#258636); +#258635 = CARTESIAN_POINT('',(118.423559,-132.82126,-7.5E-02)); +#258636 = VECTOR('',#258637,1.); +#258637 = DIRECTION('',(0.234229374205,-0.972181361814,0.)); +#258638 = ORIENTED_EDGE('',*,*,#258639,.T.); +#258639 = EDGE_CURVE('',#258632,#258640,#258642,.T.); +#258640 = VERTEX_POINT('',#258641); +#258641 = CARTESIAN_POINT('',(118.428541,-133.862551,-7.5E-02)); +#258642 = LINE('',#258643,#258644); +#258643 = CARTESIAN_POINT('',(118.429982,-132.847919,-7.5E-02)); +#258644 = VECTOR('',#258645,1.); +#258645 = DIRECTION('',(-1.420217918158E-03,-0.99999899149,0.)); +#258646 = ORIENTED_EDGE('',*,*,#258647,.T.); +#258647 = EDGE_CURVE('',#258640,#258648,#258650,.T.); +#258648 = VERTEX_POINT('',#258649); +#258649 = CARTESIAN_POINT('',(118.279982,-133.847919,-7.5E-02)); +#258650 = CIRCLE('',#258651,7.500006711462E-02); +#258651 = AXIS2_PLACEMENT_3D('',#258652,#258653,#258654); +#258652 = CARTESIAN_POINT('',(118.35498206711,-133.8479190671,-7.5E-02) + ); +#258653 = DIRECTION('',(-0.,0.,-1.)); +#258654 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#258655 = ORIENTED_EDGE('',*,*,#258656,.T.); +#258656 = EDGE_CURVE('',#258648,#258657,#258659,.T.); +#258657 = VERTEX_POINT('',#258658); +#258658 = CARTESIAN_POINT('',(118.279982,-133.185986,-7.5E-02)); +#258659 = LINE('',#258660,#258661); +#258660 = CARTESIAN_POINT('',(118.279982,-133.847919,-7.5E-02)); +#258661 = VECTOR('',#258662,1.); +#258662 = DIRECTION('',(0.,1.,0.)); +#258663 = ORIENTED_EDGE('',*,*,#258664,.T.); +#258664 = EDGE_CURVE('',#258657,#258665,#258667,.T.); +#258665 = VERTEX_POINT('',#258666); +#258666 = CARTESIAN_POINT('',(118.082119,-133.60657,-7.5E-02)); +#258667 = LINE('',#258668,#258669); +#258668 = CARTESIAN_POINT('',(118.279982,-133.185986,-7.5E-02)); +#258669 = VECTOR('',#258670,1.); +#258670 = DIRECTION('',(-0.42569331878,-0.904867503199,0.)); +#258671 = ORIENTED_EDGE('',*,*,#258672,.T.); +#258672 = EDGE_CURVE('',#258665,#258673,#258675,.T.); +#258673 = VERTEX_POINT('',#258674); +#258674 = CARTESIAN_POINT('',(117.953685,-133.593921,-7.5E-02)); +#258675 = CIRCLE('',#258676,7.50005556121E-02); +#258676 = AXIS2_PLACEMENT_3D('',#258677,#258678,#258679); +#258677 = CARTESIAN_POINT('',(118.02164865745,-133.562203109,-7.5E-02)); +#258678 = DIRECTION('',(-0.,0.,-1.)); +#258679 = DIRECTION('',(0.806265261009,-0.591554163953,-0.)); +#258680 = ORIENTED_EDGE('',*,*,#258681,.T.); +#258681 = EDGE_CURVE('',#258673,#258682,#258684,.T.); +#258682 = VERTEX_POINT('',#258683); +#258683 = CARTESIAN_POINT('',(117.763316,-133.185986,-7.5E-02)); +#258684 = LINE('',#258685,#258686); +#258685 = CARTESIAN_POINT('',(117.953685,-133.593921,-7.5E-02)); +#258686 = VECTOR('',#258687,1.); +#258687 = DIRECTION('',(-0.42288424924,0.906183707503,0.)); +#258688 = ORIENTED_EDGE('',*,*,#258689,.T.); +#258689 = EDGE_CURVE('',#258682,#258690,#258692,.T.); +#258690 = VERTEX_POINT('',#258691); +#258691 = CARTESIAN_POINT('',(117.761875,-133.862551,-7.5E-02)); +#258692 = LINE('',#258693,#258694); +#258693 = CARTESIAN_POINT('',(117.763316,-133.185986,-7.5E-02)); +#258694 = VECTOR('',#258695,1.); +#258695 = DIRECTION('',(-2.129871825402E-03,-0.99999773182,0.)); +#258696 = ORIENTED_EDGE('',*,*,#258697,.T.); +#258697 = EDGE_CURVE('',#258690,#258698,#258700,.T.); +#258698 = VERTEX_POINT('',#258699); +#258699 = CARTESIAN_POINT('',(117.613316,-133.847919,-7.5E-02)); +#258700 = CIRCLE('',#258701,7.500006711464E-02); +#258701 = AXIS2_PLACEMENT_3D('',#258702,#258703,#258704); +#258702 = CARTESIAN_POINT('',(117.68831606711,-133.8479190671,-7.5E-02) + ); +#258703 = DIRECTION('',(-0.,0.,-1.)); +#258704 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#258705 = ORIENTED_EDGE('',*,*,#258706,.T.); +#258706 = EDGE_CURVE('',#258698,#258707,#258709,.T.); +#258707 = VERTEX_POINT('',#258708); +#258708 = CARTESIAN_POINT('',(117.614757,-132.833287,-7.5E-02)); +#258709 = LINE('',#258710,#258711); +#258710 = CARTESIAN_POINT('',(117.613316,-133.847919,-7.5E-02)); +#258711 = VECTOR('',#258712,1.); +#258712 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#258713 = ORIENTED_EDGE('',*,*,#258714,.T.); +#258714 = EDGE_CURVE('',#258707,#258715,#258717,.T.); +#258715 = VERTEX_POINT('',#258716); +#258716 = CARTESIAN_POINT('',(117.75628,-132.816203,-7.5E-02)); +#258717 = CIRCLE('',#258718,7.500008955867E-02); +#258718 = AXIS2_PLACEMENT_3D('',#258719,#258720,#258721); +#258719 = CARTESIAN_POINT('',(117.68831595197,-132.8479189519,-7.5E-02) + ); +#258720 = DIRECTION('',(0.,0.,-1.)); +#258721 = DIRECTION('',(-0.980784855129,0.195092460003,0.)); +#258722 = ORIENTED_EDGE('',*,*,#258723,.T.); +#258723 = EDGE_CURVE('',#258715,#258724,#258726,.T.); +#258724 = VERTEX_POINT('',#258725); +#258725 = CARTESIAN_POINT('',(118.021648,-133.38485,-7.5E-02)); +#258726 = LINE('',#258727,#258728); +#258727 = CARTESIAN_POINT('',(117.75628,-132.816203,-7.5E-02)); +#258728 = VECTOR('',#258729,1.); +#258729 = DIRECTION('',(0.422884680174,-0.906183506402,0.)); +#258730 = ORIENTED_EDGE('',*,*,#258731,.T.); +#258731 = EDGE_CURVE('',#258724,#258597,#258732,.T.); +#258732 = LINE('',#258733,#258734); +#258733 = CARTESIAN_POINT('',(118.021648,-133.38485,-7.5E-02)); +#258734 = VECTOR('',#258735,1.); +#258735 = DIRECTION('',(0.424919689643,0.905231051916,0.)); +#258736 = PLANE('',#258737); +#258737 = AXIS2_PLACEMENT_3D('',#258738,#258739,#258740); +#258738 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#258739 = DIRECTION('',(-0.,-0.,-1.)); +#258740 = DIRECTION('',(-1.,0.,0.)); +#258741 = SHELL_BASED_SURFACE_MODEL('',(#258742)); +#258742 = OPEN_SHELL('',(#258743)); +#258743 = ADVANCED_FACE('',(#258744),#259277,.T.); +#258744 = FACE_BOUND('',#258745,.T.); +#258745 = EDGE_LOOP('',(#258746,#258757,#258765,#258773,#258781,#258789, + #258797,#258805,#258814,#258822,#258830,#258838,#258847,#258855, + #258864,#258872,#258880,#258888,#258897,#258905,#258913,#258921, + #258929,#258937,#258945,#258953,#258961,#258969,#258977,#258985, + #258993,#259001,#259009,#259017,#259025,#259033,#259041,#259049, + #259057,#259065,#259073,#259081,#259089,#259097,#259105,#259113, + #259121,#259129,#259137,#259145,#259154,#259162,#259171,#259179, + #259187,#259196,#259204,#259213,#259221,#259229,#259237,#259246, + #259254,#259263,#259271)); +#258746 = ORIENTED_EDGE('',*,*,#258747,.T.); +#258747 = EDGE_CURVE('',#258748,#258750,#258752,.T.); +#258748 = VERTEX_POINT('',#258749); +#258749 = CARTESIAN_POINT('',(87.12165,-78.6531,-7.5E-02)); +#258750 = VERTEX_POINT('',#258751); +#258751 = CARTESIAN_POINT('',(87.18165,-78.5931,-7.5E-02)); +#258752 = CIRCLE('',#258753,5.999932016256E-02); +#258753 = AXIS2_PLACEMENT_3D('',#258754,#258755,#258756); +#258754 = CARTESIAN_POINT('',(87.181649320159,-78.65309932015,-7.5E-02) + ); +#258755 = DIRECTION('',(0.,0.,-1.)); +#258756 = DIRECTION('',(-0.999999999936,-1.133081635828E-05,-0.)); +#258757 = ORIENTED_EDGE('',*,*,#258758,.T.); +#258758 = EDGE_CURVE('',#258750,#258759,#258761,.T.); +#258759 = VERTEX_POINT('',#258760); +#258760 = CARTESIAN_POINT('',(96.50572,-78.5931,-7.5E-02)); +#258761 = LINE('',#258762,#258763); +#258762 = CARTESIAN_POINT('',(87.18165,-78.5931,-7.5E-02)); +#258763 = VECTOR('',#258764,1.); +#258764 = DIRECTION('',(1.,0.,0.)); +#258765 = ORIENTED_EDGE('',*,*,#258766,.T.); +#258766 = EDGE_CURVE('',#258759,#258767,#258769,.T.); +#258767 = VERTEX_POINT('',#258768); +#258768 = CARTESIAN_POINT('',(96.485532,-78.641836,-7.5E-02)); +#258769 = LINE('',#258770,#258771); +#258770 = CARTESIAN_POINT('',(96.50572,-78.5931,-7.5E-02)); +#258771 = VECTOR('',#258772,1.); +#258772 = DIRECTION('',(-0.382697797805,-0.92387358202,0.)); +#258773 = ORIENTED_EDGE('',*,*,#258774,.T.); +#258774 = EDGE_CURVE('',#258767,#258775,#258777,.T.); +#258775 = VERTEX_POINT('',#258776); +#258776 = CARTESIAN_POINT('',(96.485532,-78.700364,-7.5E-02)); +#258777 = LINE('',#258778,#258779); +#258778 = CARTESIAN_POINT('',(96.485532,-78.641836,-7.5E-02)); +#258779 = VECTOR('',#258780,1.); +#258780 = DIRECTION('',(0.,-1.,0.)); +#258781 = ORIENTED_EDGE('',*,*,#258782,.T.); +#258782 = EDGE_CURVE('',#258775,#258783,#258785,.T.); +#258783 = VERTEX_POINT('',#258784); +#258784 = CARTESIAN_POINT('',(96.490808,-78.7131,-7.5E-02)); +#258785 = LINE('',#258786,#258787); +#258786 = CARTESIAN_POINT('',(96.485532,-78.700364,-7.5E-02)); +#258787 = VECTOR('',#258788,1.); +#258788 = DIRECTION('',(0.382719100265,-0.923864757577,0.)); +#258789 = ORIENTED_EDGE('',*,*,#258790,.T.); +#258790 = EDGE_CURVE('',#258783,#258791,#258793,.T.); +#258791 = VERTEX_POINT('',#258792); +#258792 = CARTESIAN_POINT('',(87.24165,-78.7131,-7.5E-02)); +#258793 = LINE('',#258794,#258795); +#258794 = CARTESIAN_POINT('',(96.490808,-78.7131,-7.5E-02)); +#258795 = VECTOR('',#258796,1.); +#258796 = DIRECTION('',(-1.,0.,0.)); +#258797 = ORIENTED_EDGE('',*,*,#258798,.T.); +#258798 = EDGE_CURVE('',#258791,#258799,#258801,.T.); +#258799 = VERTEX_POINT('',#258800); +#258800 = CARTESIAN_POINT('',(87.24165,-88.1831,-7.5E-02)); +#258801 = LINE('',#258802,#258803); +#258802 = CARTESIAN_POINT('',(87.24165,-78.7131,-7.5E-02)); +#258803 = VECTOR('',#258804,1.); +#258804 = DIRECTION('',(0.,-1.,0.)); +#258805 = ORIENTED_EDGE('',*,*,#258806,.T.); +#258806 = EDGE_CURVE('',#258799,#258807,#258809,.T.); +#258807 = VERTEX_POINT('',#258808); +#258808 = CARTESIAN_POINT('',(87.18165,-88.2431,-7.5E-02)); +#258809 = CIRCLE('',#258810,5.999932016262E-02); +#258810 = AXIS2_PLACEMENT_3D('',#258811,#258812,#258813); +#258811 = CARTESIAN_POINT('',(87.181650679841,-88.18310067984,-7.5E-02) + ); +#258812 = DIRECTION('',(0.,0.,-1.)); +#258813 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#258814 = ORIENTED_EDGE('',*,*,#258815,.T.); +#258815 = EDGE_CURVE('',#258807,#258816,#258818,.T.); +#258816 = VERTEX_POINT('',#258817); +#258817 = CARTESIAN_POINT('',(80.89165,-88.2431,-7.5E-02)); +#258818 = LINE('',#258819,#258820); +#258819 = CARTESIAN_POINT('',(87.18165,-88.2431,-7.5E-02)); +#258820 = VECTOR('',#258821,1.); +#258821 = DIRECTION('',(-1.,0.,0.)); +#258822 = ORIENTED_EDGE('',*,*,#258823,.T.); +#258823 = EDGE_CURVE('',#258816,#258824,#258826,.T.); +#258824 = VERTEX_POINT('',#258825); +#258825 = CARTESIAN_POINT('',(80.89165,-99.8031,-7.5E-02)); +#258826 = LINE('',#258827,#258828); +#258827 = CARTESIAN_POINT('',(80.89165,-88.2431,-7.5E-02)); +#258828 = VECTOR('',#258829,1.); +#258829 = DIRECTION('',(0.,-1.,0.)); +#258830 = ORIENTED_EDGE('',*,*,#258831,.T.); +#258831 = EDGE_CURVE('',#258824,#258832,#258834,.T.); +#258832 = VERTEX_POINT('',#258833); +#258833 = CARTESIAN_POINT('',(87.18165,-99.8031,-7.5E-02)); +#258834 = LINE('',#258835,#258836); +#258835 = CARTESIAN_POINT('',(80.89165,-99.8031,-7.5E-02)); +#258836 = VECTOR('',#258837,1.); +#258837 = DIRECTION('',(1.,0.,0.)); +#258838 = ORIENTED_EDGE('',*,*,#258839,.T.); +#258839 = EDGE_CURVE('',#258832,#258840,#258842,.T.); +#258840 = VERTEX_POINT('',#258841); +#258841 = CARTESIAN_POINT('',(87.24165,-99.8631,-7.5E-02)); +#258842 = CIRCLE('',#258843,5.999932016261E-02); +#258843 = AXIS2_PLACEMENT_3D('',#258844,#258845,#258846); +#258844 = CARTESIAN_POINT('',(87.181650679841,-99.86309932015,-7.5E-02) + ); +#258845 = DIRECTION('',(0.,0.,-1.)); +#258846 = DIRECTION('',(-1.133081588457E-05,0.999999999936,0.)); +#258847 = ORIENTED_EDGE('',*,*,#258848,.T.); +#258848 = EDGE_CURVE('',#258840,#258849,#258851,.T.); +#258849 = VERTEX_POINT('',#258850); +#258850 = CARTESIAN_POINT('',(87.24165,-119.9331,-7.5E-02)); +#258851 = LINE('',#258852,#258853); +#258852 = CARTESIAN_POINT('',(87.24165,-99.8631,-7.5E-02)); +#258853 = VECTOR('',#258854,1.); +#258854 = DIRECTION('',(0.,-1.,0.)); +#258855 = ORIENTED_EDGE('',*,*,#258856,.T.); +#258856 = EDGE_CURVE('',#258849,#258857,#258859,.T.); +#258857 = VERTEX_POINT('',#258858); +#258858 = CARTESIAN_POINT('',(87.18165,-119.9931,-7.5E-02)); +#258859 = CIRCLE('',#258860,5.999932016262E-02); +#258860 = AXIS2_PLACEMENT_3D('',#258861,#258862,#258863); +#258861 = CARTESIAN_POINT('',(87.181650679841,-119.9331006798,-7.5E-02) + ); +#258862 = DIRECTION('',(0.,0.,-1.)); +#258863 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#258864 = ORIENTED_EDGE('',*,*,#258865,.T.); +#258865 = EDGE_CURVE('',#258857,#258866,#258868,.T.); +#258866 = VERTEX_POINT('',#258867); +#258867 = CARTESIAN_POINT('',(85.34165,-119.9931,-7.5E-02)); +#258868 = LINE('',#258869,#258870); +#258869 = CARTESIAN_POINT('',(87.18165,-119.9931,-7.5E-02)); +#258870 = VECTOR('',#258871,1.); +#258871 = DIRECTION('',(-1.,0.,0.)); +#258872 = ORIENTED_EDGE('',*,*,#258873,.T.); +#258873 = EDGE_CURVE('',#258866,#258874,#258876,.T.); +#258874 = VERTEX_POINT('',#258875); +#258875 = CARTESIAN_POINT('',(85.34165,-129.0131,-7.5E-02)); +#258876 = LINE('',#258877,#258878); +#258877 = CARTESIAN_POINT('',(85.34165,-119.9931,-7.5E-02)); +#258878 = VECTOR('',#258879,1.); +#258879 = DIRECTION('',(0.,-1.,0.)); +#258880 = ORIENTED_EDGE('',*,*,#258881,.T.); +#258881 = EDGE_CURVE('',#258874,#258882,#258884,.T.); +#258882 = VERTEX_POINT('',#258883); +#258883 = CARTESIAN_POINT('',(87.18165,-129.0131,-7.5E-02)); +#258884 = LINE('',#258885,#258886); +#258885 = CARTESIAN_POINT('',(85.34165,-129.0131,-7.5E-02)); +#258886 = VECTOR('',#258887,1.); +#258887 = DIRECTION('',(1.,0.,0.)); +#258888 = ORIENTED_EDGE('',*,*,#258889,.T.); +#258889 = EDGE_CURVE('',#258882,#258890,#258892,.T.); +#258890 = VERTEX_POINT('',#258891); +#258891 = CARTESIAN_POINT('',(87.24165,-129.0731,-7.5E-02)); +#258892 = CIRCLE('',#258893,5.999932016256E-02); +#258893 = AXIS2_PLACEMENT_3D('',#258894,#258895,#258896); +#258894 = CARTESIAN_POINT('',(87.181650679841,-129.0730993201,-7.5E-02) + ); +#258895 = DIRECTION('',(0.,0.,-1.)); +#258896 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#258897 = ORIENTED_EDGE('',*,*,#258898,.T.); +#258898 = EDGE_CURVE('',#258890,#258899,#258901,.T.); +#258899 = VERTEX_POINT('',#258900); +#258900 = CARTESIAN_POINT('',(87.24165,-132.1931,-7.5E-02)); +#258901 = LINE('',#258902,#258903); +#258902 = CARTESIAN_POINT('',(87.24165,-129.0731,-7.5E-02)); +#258903 = VECTOR('',#258904,1.); +#258904 = DIRECTION('',(0.,-1.,0.)); +#258905 = ORIENTED_EDGE('',*,*,#258906,.T.); +#258906 = EDGE_CURVE('',#258899,#258907,#258909,.T.); +#258907 = VERTEX_POINT('',#258908); +#258908 = CARTESIAN_POINT('',(153.42165,-132.1931,-7.5E-02)); +#258909 = LINE('',#258910,#258911); +#258910 = CARTESIAN_POINT('',(87.24165,-132.1931,-7.5E-02)); +#258911 = VECTOR('',#258912,1.); +#258912 = DIRECTION('',(1.,0.,0.)); +#258913 = ORIENTED_EDGE('',*,*,#258914,.T.); +#258914 = EDGE_CURVE('',#258907,#258915,#258917,.T.); +#258915 = VERTEX_POINT('',#258916); +#258916 = CARTESIAN_POINT('',(153.42165,-129.5831,-7.5E-02)); +#258917 = LINE('',#258918,#258919); +#258918 = CARTESIAN_POINT('',(153.42165,-132.1931,-7.5E-02)); +#258919 = VECTOR('',#258920,1.); +#258920 = DIRECTION('',(0.,1.,0.)); +#258921 = ORIENTED_EDGE('',*,*,#258922,.T.); +#258922 = EDGE_CURVE('',#258915,#258923,#258925,.T.); +#258923 = VERTEX_POINT('',#258924); +#258924 = CARTESIAN_POINT('',(153.426217,-129.560139,-7.5E-02)); +#258925 = LINE('',#258926,#258927); +#258926 = CARTESIAN_POINT('',(153.42165,-129.5831,-7.5E-02)); +#258927 = VECTOR('',#258928,1.); +#258928 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#258929 = ORIENTED_EDGE('',*,*,#258930,.T.); +#258930 = EDGE_CURVE('',#258923,#258931,#258933,.T.); +#258931 = VERTEX_POINT('',#258932); +#258932 = CARTESIAN_POINT('',(153.439224,-129.540674,-7.5E-02)); +#258933 = LINE('',#258934,#258935); +#258934 = CARTESIAN_POINT('',(153.426217,-129.560139,-7.5E-02)); +#258935 = VECTOR('',#258936,1.); +#258936 = DIRECTION('',(0.555596893534,0.831451797698,0.)); +#258937 = ORIENTED_EDGE('',*,*,#258938,.T.); +#258938 = EDGE_CURVE('',#258931,#258939,#258941,.T.); +#258939 = VERTEX_POINT('',#258940); +#258940 = CARTESIAN_POINT('',(155.96165,-127.018247,-7.5E-02)); +#258941 = LINE('',#258942,#258943); +#258942 = CARTESIAN_POINT('',(153.439224,-129.540674,-7.5E-02)); +#258943 = VECTOR('',#258944,1.); +#258944 = DIRECTION('',(0.707106641023,0.707106921351,0.)); +#258945 = ORIENTED_EDGE('',*,*,#258946,.T.); +#258946 = EDGE_CURVE('',#258939,#258947,#258949,.T.); +#258947 = VERTEX_POINT('',#258948); +#258948 = CARTESIAN_POINT('',(155.96165,-94.297952,-7.5E-02)); +#258949 = LINE('',#258950,#258951); +#258950 = CARTESIAN_POINT('',(155.96165,-127.018247,-7.5E-02)); +#258951 = VECTOR('',#258952,1.); +#258952 = DIRECTION('',(0.,1.,0.)); +#258953 = ORIENTED_EDGE('',*,*,#258954,.T.); +#258954 = EDGE_CURVE('',#258947,#258955,#258957,.T.); +#258955 = VERTEX_POINT('',#258956); +#258956 = CARTESIAN_POINT('',(153.439224,-91.775526,-7.5E-02)); +#258957 = LINE('',#258958,#258959); +#258958 = CARTESIAN_POINT('',(155.96165,-94.297952,-7.5E-02)); +#258959 = VECTOR('',#258960,1.); +#258960 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258961 = ORIENTED_EDGE('',*,*,#258962,.T.); +#258962 = EDGE_CURVE('',#258955,#258963,#258965,.T.); +#258963 = VERTEX_POINT('',#258964); +#258964 = CARTESIAN_POINT('',(153.426217,-91.756061,-7.5E-02)); +#258965 = LINE('',#258966,#258967); +#258966 = CARTESIAN_POINT('',(153.439224,-91.775526,-7.5E-02)); +#258967 = VECTOR('',#258968,1.); +#258968 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#258969 = ORIENTED_EDGE('',*,*,#258970,.T.); +#258970 = EDGE_CURVE('',#258963,#258971,#258973,.T.); +#258971 = VERTEX_POINT('',#258972); +#258972 = CARTESIAN_POINT('',(153.42165,-91.7331,-7.5E-02)); +#258973 = LINE('',#258974,#258975); +#258974 = CARTESIAN_POINT('',(153.426217,-91.756061,-7.5E-02)); +#258975 = VECTOR('',#258976,1.); +#258976 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#258977 = ORIENTED_EDGE('',*,*,#258978,.T.); +#258978 = EDGE_CURVE('',#258971,#258979,#258981,.T.); +#258979 = VERTEX_POINT('',#258980); +#258980 = CARTESIAN_POINT('',(153.42165,-80.327952,-7.5E-02)); +#258981 = LINE('',#258982,#258983); +#258982 = CARTESIAN_POINT('',(153.42165,-91.7331,-7.5E-02)); +#258983 = VECTOR('',#258984,1.); +#258984 = DIRECTION('',(0.,1.,0.)); +#258985 = ORIENTED_EDGE('',*,*,#258986,.T.); +#258986 = EDGE_CURVE('',#258979,#258987,#258989,.T.); +#258987 = VERTEX_POINT('',#258988); +#258988 = CARTESIAN_POINT('',(151.806798,-78.7131,-7.5E-02)); +#258989 = LINE('',#258990,#258991); +#258990 = CARTESIAN_POINT('',(153.42165,-80.327952,-7.5E-02)); +#258991 = VECTOR('',#258992,1.); +#258992 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258993 = ORIENTED_EDGE('',*,*,#258994,.T.); +#258994 = EDGE_CURVE('',#258987,#258995,#258997,.T.); +#258995 = VERTEX_POINT('',#258996); +#258996 = CARTESIAN_POINT('',(96.774492,-78.7131,-7.5E-02)); +#258997 = LINE('',#258998,#258999); +#258998 = CARTESIAN_POINT('',(151.806798,-78.7131,-7.5E-02)); +#258999 = VECTOR('',#259000,1.); +#259000 = DIRECTION('',(-1.,0.,0.)); +#259001 = ORIENTED_EDGE('',*,*,#259002,.T.); +#259002 = EDGE_CURVE('',#258995,#259003,#259005,.T.); +#259003 = VERTEX_POINT('',#259004); +#259004 = CARTESIAN_POINT('',(96.779768,-78.700364,-7.5E-02)); +#259005 = LINE('',#259006,#259007); +#259006 = CARTESIAN_POINT('',(96.774492,-78.7131,-7.5E-02)); +#259007 = VECTOR('',#259008,1.); +#259008 = DIRECTION('',(0.382719100265,0.923864757577,0.)); +#259009 = ORIENTED_EDGE('',*,*,#259010,.T.); +#259010 = EDGE_CURVE('',#259003,#259011,#259013,.T.); +#259011 = VERTEX_POINT('',#259012); +#259012 = CARTESIAN_POINT('',(96.779768,-78.641836,-7.5E-02)); +#259013 = LINE('',#259014,#259015); +#259014 = CARTESIAN_POINT('',(96.779768,-78.700364,-7.5E-02)); +#259015 = VECTOR('',#259016,1.); +#259016 = DIRECTION('',(0.,1.,0.)); +#259017 = ORIENTED_EDGE('',*,*,#259018,.T.); +#259018 = EDGE_CURVE('',#259011,#259019,#259021,.T.); +#259019 = VERTEX_POINT('',#259020); +#259020 = CARTESIAN_POINT('',(96.75958,-78.5931,-7.5E-02)); +#259021 = LINE('',#259022,#259023); +#259022 = CARTESIAN_POINT('',(96.779768,-78.641836,-7.5E-02)); +#259023 = VECTOR('',#259024,1.); +#259024 = DIRECTION('',(-0.382697797805,0.92387358202,0.)); +#259025 = ORIENTED_EDGE('',*,*,#259026,.T.); +#259026 = EDGE_CURVE('',#259019,#259027,#259029,.T.); +#259027 = VERTEX_POINT('',#259028); +#259028 = CARTESIAN_POINT('',(151.83165,-78.5931,-7.5E-02)); +#259029 = LINE('',#259030,#259031); +#259030 = CARTESIAN_POINT('',(96.75958,-78.5931,-7.5E-02)); +#259031 = VECTOR('',#259032,1.); +#259032 = DIRECTION('',(1.,0.,0.)); +#259033 = ORIENTED_EDGE('',*,*,#259034,.T.); +#259034 = EDGE_CURVE('',#259027,#259035,#259037,.T.); +#259035 = VERTEX_POINT('',#259036); +#259036 = CARTESIAN_POINT('',(151.854611,-78.597667,-7.5E-02)); +#259037 = LINE('',#259038,#259039); +#259038 = CARTESIAN_POINT('',(151.83165,-78.5931,-7.5E-02)); +#259039 = VECTOR('',#259040,1.); +#259040 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#259041 = ORIENTED_EDGE('',*,*,#259042,.T.); +#259042 = EDGE_CURVE('',#259035,#259043,#259045,.T.); +#259043 = VERTEX_POINT('',#259044); +#259044 = CARTESIAN_POINT('',(151.874076,-78.610674,-7.5E-02)); +#259045 = LINE('',#259046,#259047); +#259046 = CARTESIAN_POINT('',(151.854611,-78.597667,-7.5E-02)); +#259047 = VECTOR('',#259048,1.); +#259048 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#259049 = ORIENTED_EDGE('',*,*,#259050,.T.); +#259050 = EDGE_CURVE('',#259043,#259051,#259053,.T.); +#259051 = VERTEX_POINT('',#259052); +#259052 = CARTESIAN_POINT('',(153.524076,-80.260673,-7.5E-02)); +#259053 = LINE('',#259054,#259055); +#259054 = CARTESIAN_POINT('',(151.874076,-78.610674,-7.5E-02)); +#259055 = VECTOR('',#259056,1.); +#259056 = DIRECTION('',(0.707106995461,-0.707106566912,0.)); +#259057 = ORIENTED_EDGE('',*,*,#259058,.T.); +#259058 = EDGE_CURVE('',#259051,#259059,#259061,.T.); +#259059 = VERTEX_POINT('',#259060); +#259060 = CARTESIAN_POINT('',(153.537083,-80.280139,-7.5E-02)); +#259061 = LINE('',#259062,#259063); +#259062 = CARTESIAN_POINT('',(153.524076,-80.260673,-7.5E-02)); +#259063 = VECTOR('',#259064,1.); +#259064 = DIRECTION('',(0.555577161695,-0.831464982668,0.)); +#259065 = ORIENTED_EDGE('',*,*,#259066,.T.); +#259066 = EDGE_CURVE('',#259059,#259067,#259069,.T.); +#259067 = VERTEX_POINT('',#259068); +#259068 = CARTESIAN_POINT('',(153.54165,-80.3031,-7.5E-02)); +#259069 = LINE('',#259070,#259071); +#259070 = CARTESIAN_POINT('',(153.537083,-80.280139,-7.5E-02)); +#259071 = VECTOR('',#259072,1.); +#259072 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#259073 = ORIENTED_EDGE('',*,*,#259074,.T.); +#259074 = EDGE_CURVE('',#259067,#259075,#259077,.T.); +#259075 = VERTEX_POINT('',#259076); +#259076 = CARTESIAN_POINT('',(153.54165,-91.708247,-7.5E-02)); +#259077 = LINE('',#259078,#259079); +#259078 = CARTESIAN_POINT('',(153.54165,-80.3031,-7.5E-02)); +#259079 = VECTOR('',#259080,1.); +#259080 = DIRECTION('',(0.,-1.,0.)); +#259081 = ORIENTED_EDGE('',*,*,#259082,.T.); +#259082 = EDGE_CURVE('',#259075,#259083,#259085,.T.); +#259083 = VERTEX_POINT('',#259084); +#259084 = CARTESIAN_POINT('',(156.064076,-94.230673,-7.5E-02)); +#259085 = LINE('',#259086,#259087); +#259086 = CARTESIAN_POINT('',(153.54165,-91.708247,-7.5E-02)); +#259087 = VECTOR('',#259088,1.); +#259088 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259089 = ORIENTED_EDGE('',*,*,#259090,.T.); +#259090 = EDGE_CURVE('',#259083,#259091,#259093,.T.); +#259091 = VERTEX_POINT('',#259092); +#259092 = CARTESIAN_POINT('',(156.077083,-94.250139,-7.5E-02)); +#259093 = LINE('',#259094,#259095); +#259094 = CARTESIAN_POINT('',(156.064076,-94.230673,-7.5E-02)); +#259095 = VECTOR('',#259096,1.); +#259096 = DIRECTION('',(0.555577161695,-0.831464982668,0.)); +#259097 = ORIENTED_EDGE('',*,*,#259098,.T.); +#259098 = EDGE_CURVE('',#259091,#259099,#259101,.T.); +#259099 = VERTEX_POINT('',#259100); +#259100 = CARTESIAN_POINT('',(156.08165,-94.2731,-7.5E-02)); +#259101 = LINE('',#259102,#259103); +#259102 = CARTESIAN_POINT('',(156.077083,-94.250139,-7.5E-02)); +#259103 = VECTOR('',#259104,1.); +#259104 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#259105 = ORIENTED_EDGE('',*,*,#259106,.T.); +#259106 = EDGE_CURVE('',#259099,#259107,#259109,.T.); +#259107 = VERTEX_POINT('',#259108); +#259108 = CARTESIAN_POINT('',(156.08165,-127.0431,-7.5E-02)); +#259109 = LINE('',#259110,#259111); +#259110 = CARTESIAN_POINT('',(156.08165,-94.2731,-7.5E-02)); +#259111 = VECTOR('',#259112,1.); +#259112 = DIRECTION('',(0.,-1.,0.)); +#259113 = ORIENTED_EDGE('',*,*,#259114,.T.); +#259114 = EDGE_CURVE('',#259107,#259115,#259117,.T.); +#259115 = VERTEX_POINT('',#259116); +#259116 = CARTESIAN_POINT('',(156.077083,-127.066061,-7.5E-02)); +#259117 = LINE('',#259118,#259119); +#259118 = CARTESIAN_POINT('',(156.08165,-127.0431,-7.5E-02)); +#259119 = VECTOR('',#259120,1.); +#259120 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#259121 = ORIENTED_EDGE('',*,*,#259122,.T.); +#259122 = EDGE_CURVE('',#259115,#259123,#259125,.T.); +#259123 = VERTEX_POINT('',#259124); +#259124 = CARTESIAN_POINT('',(156.064076,-127.085527,-7.5E-02)); +#259125 = LINE('',#259126,#259127); +#259126 = CARTESIAN_POINT('',(156.077083,-127.066061,-7.5E-02)); +#259127 = VECTOR('',#259128,1.); +#259128 = DIRECTION('',(-0.555577161695,-0.831464982668,0.)); +#259129 = ORIENTED_EDGE('',*,*,#259130,.T.); +#259130 = EDGE_CURVE('',#259123,#259131,#259133,.T.); +#259131 = VERTEX_POINT('',#259132); +#259132 = CARTESIAN_POINT('',(153.54165,-129.607952,-7.5E-02)); +#259133 = LINE('',#259134,#259135); +#259134 = CARTESIAN_POINT('',(156.064076,-127.085527,-7.5E-02)); +#259135 = VECTOR('',#259136,1.); +#259136 = DIRECTION('',(-0.707106921351,-0.707106641022,0.)); +#259137 = ORIENTED_EDGE('',*,*,#259138,.T.); +#259138 = EDGE_CURVE('',#259131,#259139,#259141,.T.); +#259139 = VERTEX_POINT('',#259140); +#259140 = CARTESIAN_POINT('',(153.54165,-132.2531,-7.5E-02)); +#259141 = LINE('',#259142,#259143); +#259142 = CARTESIAN_POINT('',(153.54165,-129.607952,-7.5E-02)); +#259143 = VECTOR('',#259144,1.); +#259144 = DIRECTION('',(0.,-1.,0.)); +#259145 = ORIENTED_EDGE('',*,*,#259146,.T.); +#259146 = EDGE_CURVE('',#259139,#259147,#259149,.T.); +#259147 = VERTEX_POINT('',#259148); +#259148 = CARTESIAN_POINT('',(153.48165,-132.3131,-7.5E-02)); +#259149 = CIRCLE('',#259150,5.999932016262E-02); +#259150 = AXIS2_PLACEMENT_3D('',#259151,#259152,#259153); +#259151 = CARTESIAN_POINT('',(153.48165067984,-132.2531006798,-7.5E-02) + ); +#259152 = DIRECTION('',(0.,0.,-1.)); +#259153 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#259154 = ORIENTED_EDGE('',*,*,#259155,.T.); +#259155 = EDGE_CURVE('',#259147,#259156,#259158,.T.); +#259156 = VERTEX_POINT('',#259157); +#259157 = CARTESIAN_POINT('',(87.18165,-132.3131,-7.5E-02)); +#259158 = LINE('',#259159,#259160); +#259159 = CARTESIAN_POINT('',(153.48165,-132.3131,-7.5E-02)); +#259160 = VECTOR('',#259161,1.); +#259161 = DIRECTION('',(-1.,0.,0.)); +#259162 = ORIENTED_EDGE('',*,*,#259163,.T.); +#259163 = EDGE_CURVE('',#259156,#259164,#259166,.T.); +#259164 = VERTEX_POINT('',#259165); +#259165 = CARTESIAN_POINT('',(87.12165,-132.2531,-7.5E-02)); +#259166 = CIRCLE('',#259167,5.999932016251E-02); +#259167 = AXIS2_PLACEMENT_3D('',#259168,#259169,#259170); +#259168 = CARTESIAN_POINT('',(87.181649320159,-132.2531006798,-7.5E-02) + ); +#259169 = DIRECTION('',(0.,0.,-1.)); +#259170 = DIRECTION('',(1.133081730569E-05,-0.999999999936,0.)); +#259171 = ORIENTED_EDGE('',*,*,#259172,.T.); +#259172 = EDGE_CURVE('',#259164,#259173,#259175,.T.); +#259173 = VERTEX_POINT('',#259174); +#259174 = CARTESIAN_POINT('',(87.12165,-129.1331,-7.5E-02)); +#259175 = LINE('',#259176,#259177); +#259176 = CARTESIAN_POINT('',(87.12165,-132.2531,-7.5E-02)); +#259177 = VECTOR('',#259178,1.); +#259178 = DIRECTION('',(0.,1.,0.)); +#259179 = ORIENTED_EDGE('',*,*,#259180,.T.); +#259180 = EDGE_CURVE('',#259173,#259181,#259183,.T.); +#259181 = VERTEX_POINT('',#259182); +#259182 = CARTESIAN_POINT('',(85.28165,-129.1331,-7.5E-02)); +#259183 = LINE('',#259184,#259185); +#259184 = CARTESIAN_POINT('',(87.12165,-129.1331,-7.5E-02)); +#259185 = VECTOR('',#259186,1.); +#259186 = DIRECTION('',(-1.,0.,0.)); +#259187 = ORIENTED_EDGE('',*,*,#259188,.T.); +#259188 = EDGE_CURVE('',#259181,#259189,#259191,.T.); +#259189 = VERTEX_POINT('',#259190); +#259190 = CARTESIAN_POINT('',(85.22165,-129.0731,-7.5E-02)); +#259191 = CIRCLE('',#259192,5.999932016265E-02); +#259192 = AXIS2_PLACEMENT_3D('',#259193,#259194,#259195); +#259193 = CARTESIAN_POINT('',(85.281649320159,-129.0731006798,-7.5E-02) + ); +#259194 = DIRECTION('',(0.,0.,-1.)); +#259195 = DIRECTION('',(1.133081517401E-05,-0.999999999936,0.)); +#259196 = ORIENTED_EDGE('',*,*,#259197,.T.); +#259197 = EDGE_CURVE('',#259189,#259198,#259200,.T.); +#259198 = VERTEX_POINT('',#259199); +#259199 = CARTESIAN_POINT('',(85.22165,-119.9331,-7.5E-02)); +#259200 = LINE('',#259201,#259202); +#259201 = CARTESIAN_POINT('',(85.22165,-129.0731,-7.5E-02)); +#259202 = VECTOR('',#259203,1.); +#259203 = DIRECTION('',(0.,1.,0.)); +#259204 = ORIENTED_EDGE('',*,*,#259205,.T.); +#259205 = EDGE_CURVE('',#259198,#259206,#259208,.T.); +#259206 = VERTEX_POINT('',#259207); +#259207 = CARTESIAN_POINT('',(85.28165,-119.8731,-7.5E-02)); +#259208 = CIRCLE('',#259209,5.999932016263E-02); +#259209 = AXIS2_PLACEMENT_3D('',#259210,#259211,#259212); +#259210 = CARTESIAN_POINT('',(85.281649320159,-119.9330993201,-7.5E-02) + ); +#259211 = DIRECTION('',(0.,0.,-1.)); +#259212 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#259213 = ORIENTED_EDGE('',*,*,#259214,.T.); +#259214 = EDGE_CURVE('',#259206,#259215,#259217,.T.); +#259215 = VERTEX_POINT('',#259216); +#259216 = CARTESIAN_POINT('',(87.12165,-119.8731,-7.5E-02)); +#259217 = LINE('',#259218,#259219); +#259218 = CARTESIAN_POINT('',(85.28165,-119.8731,-7.5E-02)); +#259219 = VECTOR('',#259220,1.); +#259220 = DIRECTION('',(1.,0.,0.)); +#259221 = ORIENTED_EDGE('',*,*,#259222,.T.); +#259222 = EDGE_CURVE('',#259215,#259223,#259225,.T.); +#259223 = VERTEX_POINT('',#259224); +#259224 = CARTESIAN_POINT('',(87.12165,-99.9231,-7.5E-02)); +#259225 = LINE('',#259226,#259227); +#259226 = CARTESIAN_POINT('',(87.12165,-119.8731,-7.5E-02)); +#259227 = VECTOR('',#259228,1.); +#259228 = DIRECTION('',(0.,1.,0.)); +#259229 = ORIENTED_EDGE('',*,*,#259230,.T.); +#259230 = EDGE_CURVE('',#259223,#259231,#259233,.T.); +#259231 = VERTEX_POINT('',#259232); +#259232 = CARTESIAN_POINT('',(80.83165,-99.9231,-7.5E-02)); +#259233 = LINE('',#259234,#259235); +#259234 = CARTESIAN_POINT('',(87.12165,-99.9231,-7.5E-02)); +#259235 = VECTOR('',#259236,1.); +#259236 = DIRECTION('',(-1.,0.,0.)); +#259237 = ORIENTED_EDGE('',*,*,#259238,.T.); +#259238 = EDGE_CURVE('',#259231,#259239,#259241,.T.); +#259239 = VERTEX_POINT('',#259240); +#259240 = CARTESIAN_POINT('',(80.77165,-99.8631,-7.5E-02)); +#259241 = CIRCLE('',#259242,5.999932016263E-02); +#259242 = AXIS2_PLACEMENT_3D('',#259243,#259244,#259245); +#259243 = CARTESIAN_POINT('',(80.831649320159,-99.86310067984,-7.5E-02) + ); +#259244 = DIRECTION('',(0.,0.,-1.)); +#259245 = DIRECTION('',(1.133081541087E-05,-0.999999999936,0.)); +#259246 = ORIENTED_EDGE('',*,*,#259247,.T.); +#259247 = EDGE_CURVE('',#259239,#259248,#259250,.T.); +#259248 = VERTEX_POINT('',#259249); +#259249 = CARTESIAN_POINT('',(80.77165,-88.1831,-7.5E-02)); +#259250 = LINE('',#259251,#259252); +#259251 = CARTESIAN_POINT('',(80.77165,-99.8631,-7.5E-02)); +#259252 = VECTOR('',#259253,1.); +#259253 = DIRECTION('',(0.,1.,0.)); +#259254 = ORIENTED_EDGE('',*,*,#259255,.T.); +#259255 = EDGE_CURVE('',#259248,#259256,#259258,.T.); +#259256 = VERTEX_POINT('',#259257); +#259257 = CARTESIAN_POINT('',(80.83165,-88.1231,-7.5E-02)); +#259258 = CIRCLE('',#259259,5.999932016263E-02); +#259259 = AXIS2_PLACEMENT_3D('',#259260,#259261,#259262); +#259260 = CARTESIAN_POINT('',(80.831649320159,-88.18309932015,-7.5E-02) + ); +#259261 = DIRECTION('',(0.,0.,-1.)); +#259262 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#259263 = ORIENTED_EDGE('',*,*,#259264,.T.); +#259264 = EDGE_CURVE('',#259256,#259265,#259267,.T.); +#259265 = VERTEX_POINT('',#259266); +#259266 = CARTESIAN_POINT('',(87.12165,-88.1231,-7.5E-02)); +#259267 = LINE('',#259268,#259269); +#259268 = CARTESIAN_POINT('',(80.83165,-88.1231,-7.5E-02)); +#259269 = VECTOR('',#259270,1.); +#259270 = DIRECTION('',(1.,0.,0.)); +#259271 = ORIENTED_EDGE('',*,*,#259272,.T.); +#259272 = EDGE_CURVE('',#259265,#258748,#259273,.T.); +#259273 = LINE('',#259274,#259275); +#259274 = CARTESIAN_POINT('',(87.12165,-88.1231,-7.5E-02)); +#259275 = VECTOR('',#259276,1.); +#259276 = DIRECTION('',(0.,1.,0.)); +#259277 = PLANE('',#259278); +#259278 = AXIS2_PLACEMENT_3D('',#259279,#259280,#259281); +#259279 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#259280 = DIRECTION('',(-0.,-0.,-1.)); +#259281 = DIRECTION('',(-1.,0.,0.)); +#259282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#259286)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#259283,#259284,#259285)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#259283 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#259284 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#259285 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#259286 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#259283, + 'distance_accuracy_value','confusion accuracy'); +#259287 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#259288,#259290); +#259288 = ( REPRESENTATION_RELATIONSHIP('','',#257975,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#259289) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#259289 = ITEM_DEFINED_TRANSFORMATION('','',#11,#499); +#259290 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #259291); +#259291 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('159','=>[0:1:1:70]','',#5, + #257970,$); +#259292 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#257972)); +#259293 = SHAPE_DEFINITION_REPRESENTATION(#259294,#259300); +#259294 = PRODUCT_DEFINITION_SHAPE('','',#259295); +#259295 = PRODUCT_DEFINITION('design','',#259296,#259299); +#259296 = PRODUCT_DEFINITION_FORMATION('','',#259297); +#259297 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_soldermask', + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_soldermask','',(#259298) + ); +#259298 = PRODUCT_CONTEXT('',#2,'mechanical'); +#259299 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#259300 = MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#11,#259301),#261429 + ); +#259301 = SHELL_BASED_SURFACE_MODEL('',(#259302)); +#259302 = OPEN_SHELL('',(#259303)); +#259303 = ADVANCED_FACE('',(#259304,#259338,#259349,#259360,#259371, + #259382,#259435,#259488,#259499,#259510,#259521,#259532,#259543, + #259554,#259565,#259618,#259671,#259682,#259693,#259704,#259715, + #259726,#259737,#259748,#259759,#259770,#259781,#259792,#259803, + #259814,#259825,#259836,#259847,#259858,#259869,#259880,#259891, + #259902,#259913,#259924,#259935,#259946,#259957,#259968,#259979, + #259990,#260001,#260012,#260023,#260034,#260045,#260056,#260090, + #260101,#260135,#260146,#260157,#260168,#260179,#260190,#260224, + #260235,#260246,#260257,#260268,#260279,#260290,#260301,#260312, + #260323,#260334,#260345,#260356,#260367,#260378,#260389,#260400, + #260411,#260422,#260433,#260444,#260455,#260466,#260477,#260488, + #260499,#260510,#260521,#260532,#260543,#260554,#260588,#260599, + #260610,#260621,#260632,#260643,#260654,#260665,#260676,#260687, + #260698,#260709,#260720,#260731,#260742,#260753,#260764,#260775, + #260786,#260797,#260808,#260819,#260830,#260841,#260852,#260863, + #260874,#260885,#260896,#260907,#260918,#260929,#260940,#260951, + #260962,#260973,#260984,#260995,#261006,#261017,#261028,#261039, + #261050,#261061,#261072,#261083,#261094,#261105,#261116,#261127, + #261138,#261149,#261160,#261171,#261182,#261193,#261204,#261215, + #261226,#261237,#261248,#261259,#261270,#261281,#261292,#261303, + #261314,#261325,#261336,#261347,#261358,#261369,#261380,#261391, + #261402,#261413),#261424,.T.); +#259304 = FACE_BOUND('',#259305,.F.); +#259305 = EDGE_LOOP('',(#259306,#259316,#259324,#259332)); +#259306 = ORIENTED_EDGE('',*,*,#259307,.T.); +#259307 = EDGE_CURVE('',#259308,#259310,#259312,.T.); +#259308 = VERTEX_POINT('',#259309); +#259309 = CARTESIAN_POINT('',(80.19165,-140.3231,1.56)); +#259310 = VERTEX_POINT('',#259311); +#259311 = CARTESIAN_POINT('',(80.19165,-40.3231,1.56)); +#259312 = LINE('',#259313,#259314); +#259313 = CARTESIAN_POINT('',(80.19165,-140.3231,1.56)); +#259314 = VECTOR('',#259315,1.); +#259315 = DIRECTION('',(0.,1.,0.)); +#259316 = ORIENTED_EDGE('',*,*,#259317,.T.); +#259317 = EDGE_CURVE('',#259310,#259318,#259320,.T.); +#259318 = VERTEX_POINT('',#259319); +#259319 = CARTESIAN_POINT('',(215.19165,-40.3231,1.56)); +#259320 = LINE('',#259321,#259322); +#259321 = CARTESIAN_POINT('',(80.19165,-40.3231,1.56)); +#259322 = VECTOR('',#259323,1.); +#259323 = DIRECTION('',(1.,0.,0.)); +#259324 = ORIENTED_EDGE('',*,*,#259325,.T.); +#259325 = EDGE_CURVE('',#259318,#259326,#259328,.T.); +#259326 = VERTEX_POINT('',#259327); +#259327 = CARTESIAN_POINT('',(215.19165,-140.3231,1.56)); +#259328 = LINE('',#259329,#259330); +#259329 = CARTESIAN_POINT('',(215.19165,-40.3231,1.56)); +#259330 = VECTOR('',#259331,1.); +#259331 = DIRECTION('',(0.,-1.,0.)); +#259332 = ORIENTED_EDGE('',*,*,#259333,.T.); +#259333 = EDGE_CURVE('',#259326,#259308,#259334,.T.); +#259334 = LINE('',#259335,#259336); +#259335 = CARTESIAN_POINT('',(215.19165,-140.3231,1.56)); +#259336 = VECTOR('',#259337,1.); +#259337 = DIRECTION('',(-1.,0.,0.)); +#259338 = FACE_BOUND('',#259339,.F.); +#259339 = EDGE_LOOP('',(#259340)); +#259340 = ORIENTED_EDGE('',*,*,#259341,.T.); +#259341 = EDGE_CURVE('',#259342,#259342,#259344,.T.); +#259342 = VERTEX_POINT('',#259343); +#259343 = CARTESIAN_POINT('',(199.729042,-137.8231,1.56)); +#259344 = CIRCLE('',#259345,0.537392); +#259345 = AXIS2_PLACEMENT_3D('',#259346,#259347,#259348); +#259346 = CARTESIAN_POINT('',(199.19165,-137.8231,1.56)); +#259347 = DIRECTION('',(0.,0.,1.)); +#259348 = DIRECTION('',(1.,0.,-0.)); +#259349 = FACE_BOUND('',#259350,.F.); +#259350 = EDGE_LOOP('',(#259351)); +#259351 = ORIENTED_EDGE('',*,*,#259352,.T.); +#259352 = EDGE_CURVE('',#259353,#259353,#259355,.T.); +#259353 = VERTEX_POINT('',#259354); +#259354 = CARTESIAN_POINT('',(206.229042,-137.8231,1.56)); +#259355 = CIRCLE('',#259356,0.537392); +#259356 = AXIS2_PLACEMENT_3D('',#259357,#259358,#259359); +#259357 = CARTESIAN_POINT('',(205.69165,-137.8231,1.56)); +#259358 = DIRECTION('',(0.,0.,1.)); +#259359 = DIRECTION('',(1.,0.,-0.)); +#259360 = FACE_BOUND('',#259361,.F.); +#259361 = EDGE_LOOP('',(#259362)); +#259362 = ORIENTED_EDGE('',*,*,#259363,.T.); +#259363 = EDGE_CURVE('',#259364,#259364,#259366,.T.); +#259364 = VERTEX_POINT('',#259365); +#259365 = CARTESIAN_POINT('',(86.779112,-135.3231,1.56)); +#259366 = CIRCLE('',#259367,1.587462); +#259367 = AXIS2_PLACEMENT_3D('',#259368,#259369,#259370); +#259368 = CARTESIAN_POINT('',(85.19165,-135.3231,1.56)); +#259369 = DIRECTION('',(0.,0.,1.)); +#259370 = DIRECTION('',(1.,0.,-0.)); +#259371 = FACE_BOUND('',#259372,.F.); +#259372 = EDGE_LOOP('',(#259373)); +#259373 = ORIENTED_EDGE('',*,*,#259374,.T.); +#259374 = EDGE_CURVE('',#259375,#259375,#259377,.T.); +#259375 = VERTEX_POINT('',#259376); +#259376 = CARTESIAN_POINT('',(212.779112,-135.3231,1.56)); +#259377 = CIRCLE('',#259378,1.587462); +#259378 = AXIS2_PLACEMENT_3D('',#259379,#259380,#259381); +#259379 = CARTESIAN_POINT('',(211.19165,-135.3231,1.56)); +#259380 = DIRECTION('',(0.,0.,1.)); +#259381 = DIRECTION('',(1.,0.,-0.)); +#259382 = FACE_BOUND('',#259383,.F.); +#259383 = EDGE_LOOP('',(#259384,#259395,#259403,#259412,#259420,#259429) + ); +#259384 = ORIENTED_EDGE('',*,*,#259385,.T.); +#259385 = EDGE_CURVE('',#259386,#259388,#259390,.T.); +#259386 = VERTEX_POINT('',#259387); +#259387 = CARTESIAN_POINT('',(159.5375,-134.184593,1.56)); +#259388 = VERTEX_POINT('',#259389); +#259389 = CARTESIAN_POINT('',(159.862513,-134.469933,1.56)); +#259390 = CIRCLE('',#259391,0.28758545494); +#259391 = AXIS2_PLACEMENT_3D('',#259392,#259393,#259394); +#259392 = CARTESIAN_POINT('',(159.82508538508,-134.184793442,1.56)); +#259393 = DIRECTION('',(0.,0.,1.)); +#259394 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#259395 = ORIENTED_EDGE('',*,*,#259396,.T.); +#259396 = EDGE_CURVE('',#259388,#259397,#259399,.T.); +#259397 = VERTEX_POINT('',#259398); +#259398 = CARTESIAN_POINT('',(159.93498,-134.450515,1.56)); +#259399 = LINE('',#259400,#259401); +#259400 = CARTESIAN_POINT('',(159.862513,-134.469933,1.56)); +#259401 = VECTOR('',#259402,1.); +#259402 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259403 = ORIENTED_EDGE('',*,*,#259404,.T.); +#259404 = EDGE_CURVE('',#259397,#259405,#259407,.T.); +#259405 = VERTEX_POINT('',#259406); +#259406 = CARTESIAN_POINT('',(160.1125,-134.184593,1.56)); +#259407 = CIRCLE('',#259408,0.287686427939); +#259408 = AXIS2_PLACEMENT_3D('',#259409,#259410,#259411); +#259409 = CARTESIAN_POINT('',(159.8248136193,-134.1847578751,1.56)); +#259410 = DIRECTION('',(0.,0.,1.)); +#259411 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259412 = ORIENTED_EDGE('',*,*,#259413,.T.); +#259413 = EDGE_CURVE('',#259405,#259414,#259416,.T.); +#259414 = VERTEX_POINT('',#259415); +#259415 = CARTESIAN_POINT('',(160.1125,-133.385406,1.56)); +#259416 = LINE('',#259417,#259418); +#259417 = CARTESIAN_POINT('',(160.1125,-134.184593,1.56)); +#259418 = VECTOR('',#259419,1.); +#259419 = DIRECTION('',(0.,1.,0.)); +#259420 = ORIENTED_EDGE('',*,*,#259421,.T.); +#259421 = EDGE_CURVE('',#259414,#259422,#259424,.T.); +#259422 = VERTEX_POINT('',#259423); +#259423 = CARTESIAN_POINT('',(159.5375,-133.385406,1.56)); +#259424 = CIRCLE('',#259425,0.287500026505); +#259425 = AXIS2_PLACEMENT_3D('',#259426,#259427,#259428); +#259426 = CARTESIAN_POINT('',(159.825,-133.3852825479,1.56)); +#259427 = DIRECTION('',(0.,0.,1.)); +#259428 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259429 = ORIENTED_EDGE('',*,*,#259430,.T.); +#259430 = EDGE_CURVE('',#259422,#259386,#259431,.T.); +#259431 = LINE('',#259432,#259433); +#259432 = CARTESIAN_POINT('',(159.5375,-133.385406,1.56)); +#259433 = VECTOR('',#259434,1.); +#259434 = DIRECTION('',(0.,-1.,0.)); +#259435 = FACE_BOUND('',#259436,.F.); +#259436 = EDGE_LOOP('',(#259437,#259448,#259456,#259465,#259473,#259482) + ); +#259437 = ORIENTED_EDGE('',*,*,#259438,.T.); +#259438 = EDGE_CURVE('',#259439,#259441,#259443,.T.); +#259439 = VERTEX_POINT('',#259440); +#259440 = CARTESIAN_POINT('',(168.1875,-134.184593,1.56)); +#259441 = VERTEX_POINT('',#259442); +#259442 = CARTESIAN_POINT('',(168.512513,-134.469933,1.56)); +#259443 = CIRCLE('',#259444,0.28758545494); +#259444 = AXIS2_PLACEMENT_3D('',#259445,#259446,#259447); +#259445 = CARTESIAN_POINT('',(168.47508538508,-134.184793442,1.56)); +#259446 = DIRECTION('',(0.,0.,1.)); +#259447 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#259448 = ORIENTED_EDGE('',*,*,#259449,.T.); +#259449 = EDGE_CURVE('',#259441,#259450,#259452,.T.); +#259450 = VERTEX_POINT('',#259451); +#259451 = CARTESIAN_POINT('',(168.58498,-134.450515,1.56)); +#259452 = LINE('',#259453,#259454); +#259453 = CARTESIAN_POINT('',(168.512513,-134.469933,1.56)); +#259454 = VECTOR('',#259455,1.); +#259455 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259456 = ORIENTED_EDGE('',*,*,#259457,.T.); +#259457 = EDGE_CURVE('',#259450,#259458,#259460,.T.); +#259458 = VERTEX_POINT('',#259459); +#259459 = CARTESIAN_POINT('',(168.7625,-134.184593,1.56)); +#259460 = CIRCLE('',#259461,0.287686427939); +#259461 = AXIS2_PLACEMENT_3D('',#259462,#259463,#259464); +#259462 = CARTESIAN_POINT('',(168.4748136193,-134.1847578751,1.56)); +#259463 = DIRECTION('',(0.,0.,1.)); +#259464 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259465 = ORIENTED_EDGE('',*,*,#259466,.T.); +#259466 = EDGE_CURVE('',#259458,#259467,#259469,.T.); +#259467 = VERTEX_POINT('',#259468); +#259468 = CARTESIAN_POINT('',(168.7625,-133.385406,1.56)); +#259469 = LINE('',#259470,#259471); +#259470 = CARTESIAN_POINT('',(168.7625,-134.184593,1.56)); +#259471 = VECTOR('',#259472,1.); +#259472 = DIRECTION('',(0.,1.,0.)); +#259473 = ORIENTED_EDGE('',*,*,#259474,.T.); +#259474 = EDGE_CURVE('',#259467,#259475,#259477,.T.); +#259475 = VERTEX_POINT('',#259476); +#259476 = CARTESIAN_POINT('',(168.1875,-133.385406,1.56)); +#259477 = CIRCLE('',#259478,0.287500026505); +#259478 = AXIS2_PLACEMENT_3D('',#259479,#259480,#259481); +#259479 = CARTESIAN_POINT('',(168.475,-133.3852825479,1.56)); +#259480 = DIRECTION('',(0.,0.,1.)); +#259481 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259482 = ORIENTED_EDGE('',*,*,#259483,.T.); +#259483 = EDGE_CURVE('',#259475,#259439,#259484,.T.); +#259484 = LINE('',#259485,#259486); +#259485 = CARTESIAN_POINT('',(168.1875,-133.385406,1.56)); +#259486 = VECTOR('',#259487,1.); +#259487 = DIRECTION('',(0.,-1.,0.)); +#259488 = FACE_BOUND('',#259489,.F.); +#259489 = EDGE_LOOP('',(#259490)); +#259490 = ORIENTED_EDGE('',*,*,#259491,.T.); +#259491 = EDGE_CURVE('',#259492,#259492,#259494,.T.); +#259492 = VERTEX_POINT('',#259493); +#259493 = CARTESIAN_POINT('',(173.329089,-133.8231,1.56)); +#259494 = CIRCLE('',#259495,0.637439); +#259495 = AXIS2_PLACEMENT_3D('',#259496,#259497,#259498); +#259496 = CARTESIAN_POINT('',(172.69165,-133.8231,1.56)); +#259497 = DIRECTION('',(0.,0.,1.)); +#259498 = DIRECTION('',(1.,0.,-0.)); +#259499 = FACE_BOUND('',#259500,.F.); +#259500 = EDGE_LOOP('',(#259501)); +#259501 = ORIENTED_EDGE('',*,*,#259502,.T.); +#259502 = EDGE_CURVE('',#259503,#259503,#259505,.T.); +#259503 = VERTEX_POINT('',#259504); +#259504 = CARTESIAN_POINT('',(178.329089,-133.8231,1.56)); +#259505 = CIRCLE('',#259506,0.637439); +#259506 = AXIS2_PLACEMENT_3D('',#259507,#259508,#259509); +#259507 = CARTESIAN_POINT('',(177.69165,-133.8231,1.56)); +#259508 = DIRECTION('',(0.,0.,1.)); +#259509 = DIRECTION('',(1.,0.,-0.)); +#259510 = FACE_BOUND('',#259511,.F.); +#259511 = EDGE_LOOP('',(#259512)); +#259512 = ORIENTED_EDGE('',*,*,#259513,.T.); +#259513 = EDGE_CURVE('',#259514,#259514,#259516,.T.); +#259514 = VERTEX_POINT('',#259515); +#259515 = CARTESIAN_POINT('',(183.329089,-133.8231,1.56)); +#259516 = CIRCLE('',#259517,0.637439); +#259517 = AXIS2_PLACEMENT_3D('',#259518,#259519,#259520); +#259518 = CARTESIAN_POINT('',(182.69165,-133.8231,1.56)); +#259519 = DIRECTION('',(0.,0.,1.)); +#259520 = DIRECTION('',(1.,0.,-0.)); +#259521 = FACE_BOUND('',#259522,.F.); +#259522 = EDGE_LOOP('',(#259523)); +#259523 = ORIENTED_EDGE('',*,*,#259524,.T.); +#259524 = EDGE_CURVE('',#259525,#259525,#259527,.T.); +#259525 = VERTEX_POINT('',#259526); +#259526 = CARTESIAN_POINT('',(188.329089,-133.8231,1.56)); +#259527 = CIRCLE('',#259528,0.637439); +#259528 = AXIS2_PLACEMENT_3D('',#259529,#259530,#259531); +#259529 = CARTESIAN_POINT('',(187.69165,-133.8231,1.56)); +#259530 = DIRECTION('',(0.,0.,1.)); +#259531 = DIRECTION('',(1.,0.,-0.)); +#259532 = FACE_BOUND('',#259533,.F.); +#259533 = EDGE_LOOP('',(#259534)); +#259534 = ORIENTED_EDGE('',*,*,#259535,.T.); +#259535 = EDGE_CURVE('',#259536,#259536,#259538,.T.); +#259536 = VERTEX_POINT('',#259537); +#259537 = CARTESIAN_POINT('',(193.329089,-133.8231,1.56)); +#259538 = CIRCLE('',#259539,0.637439); +#259539 = AXIS2_PLACEMENT_3D('',#259540,#259541,#259542); +#259540 = CARTESIAN_POINT('',(192.69165,-133.8231,1.56)); +#259541 = DIRECTION('',(0.,0.,1.)); +#259542 = DIRECTION('',(1.,0.,-0.)); +#259543 = FACE_BOUND('',#259544,.F.); +#259544 = EDGE_LOOP('',(#259545)); +#259545 = ORIENTED_EDGE('',*,*,#259546,.T.); +#259546 = EDGE_CURVE('',#259547,#259547,#259549,.T.); +#259547 = VERTEX_POINT('',#259548); +#259548 = CARTESIAN_POINT('',(199.729042,-133.3231,1.56)); +#259549 = CIRCLE('',#259550,0.537392); +#259550 = AXIS2_PLACEMENT_3D('',#259551,#259552,#259553); +#259551 = CARTESIAN_POINT('',(199.19165,-133.3231,1.56)); +#259552 = DIRECTION('',(0.,0.,1.)); +#259553 = DIRECTION('',(1.,0.,-0.)); +#259554 = FACE_BOUND('',#259555,.F.); +#259555 = EDGE_LOOP('',(#259556)); +#259556 = ORIENTED_EDGE('',*,*,#259557,.T.); +#259557 = EDGE_CURVE('',#259558,#259558,#259560,.T.); +#259558 = VERTEX_POINT('',#259559); +#259559 = CARTESIAN_POINT('',(206.229042,-133.3231,1.56)); +#259560 = CIRCLE('',#259561,0.537392); +#259561 = AXIS2_PLACEMENT_3D('',#259562,#259563,#259564); +#259562 = CARTESIAN_POINT('',(205.69165,-133.3231,1.56)); +#259563 = DIRECTION('',(0.,0.,1.)); +#259564 = DIRECTION('',(1.,0.,-0.)); +#259565 = FACE_BOUND('',#259566,.F.); +#259566 = EDGE_LOOP('',(#259567,#259578,#259586,#259595,#259603,#259612) + ); +#259567 = ORIENTED_EDGE('',*,*,#259568,.T.); +#259568 = EDGE_CURVE('',#259569,#259571,#259573,.T.); +#259569 = VERTEX_POINT('',#259570); +#259570 = CARTESIAN_POINT('',(159.5375,-131.154593,1.56)); +#259571 = VERTEX_POINT('',#259572); +#259572 = CARTESIAN_POINT('',(159.862513,-131.439933,1.56)); +#259573 = CIRCLE('',#259574,0.28758545494); +#259574 = AXIS2_PLACEMENT_3D('',#259575,#259576,#259577); +#259575 = CARTESIAN_POINT('',(159.82508538508,-131.154793442,1.56)); +#259576 = DIRECTION('',(0.,0.,1.)); +#259577 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#259578 = ORIENTED_EDGE('',*,*,#259579,.T.); +#259579 = EDGE_CURVE('',#259571,#259580,#259582,.T.); +#259580 = VERTEX_POINT('',#259581); +#259581 = CARTESIAN_POINT('',(159.93498,-131.420515,1.56)); +#259582 = LINE('',#259583,#259584); +#259583 = CARTESIAN_POINT('',(159.862513,-131.439933,1.56)); +#259584 = VECTOR('',#259585,1.); +#259585 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259586 = ORIENTED_EDGE('',*,*,#259587,.T.); +#259587 = EDGE_CURVE('',#259580,#259588,#259590,.T.); +#259588 = VERTEX_POINT('',#259589); +#259589 = CARTESIAN_POINT('',(160.1125,-131.154593,1.56)); +#259590 = CIRCLE('',#259591,0.287686427939); +#259591 = AXIS2_PLACEMENT_3D('',#259592,#259593,#259594); +#259592 = CARTESIAN_POINT('',(159.8248136193,-131.1547578751,1.56)); +#259593 = DIRECTION('',(0.,0.,1.)); +#259594 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259595 = ORIENTED_EDGE('',*,*,#259596,.T.); +#259596 = EDGE_CURVE('',#259588,#259597,#259599,.T.); +#259597 = VERTEX_POINT('',#259598); +#259598 = CARTESIAN_POINT('',(160.1125,-129.655406,1.56)); +#259599 = LINE('',#259600,#259601); +#259600 = CARTESIAN_POINT('',(160.1125,-131.154593,1.56)); +#259601 = VECTOR('',#259602,1.); +#259602 = DIRECTION('',(0.,1.,0.)); +#259603 = ORIENTED_EDGE('',*,*,#259604,.T.); +#259604 = EDGE_CURVE('',#259597,#259605,#259607,.T.); +#259605 = VERTEX_POINT('',#259606); +#259606 = CARTESIAN_POINT('',(159.5375,-129.655406,1.56)); +#259607 = CIRCLE('',#259608,0.287500026505); +#259608 = AXIS2_PLACEMENT_3D('',#259609,#259610,#259611); +#259609 = CARTESIAN_POINT('',(159.825,-129.6552825479,1.56)); +#259610 = DIRECTION('',(0.,0.,1.)); +#259611 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259612 = ORIENTED_EDGE('',*,*,#259613,.T.); +#259613 = EDGE_CURVE('',#259605,#259569,#259614,.T.); +#259614 = LINE('',#259615,#259616); +#259615 = CARTESIAN_POINT('',(159.5375,-129.655406,1.56)); +#259616 = VECTOR('',#259617,1.); +#259617 = DIRECTION('',(0.,-1.,0.)); +#259618 = FACE_BOUND('',#259619,.F.); +#259619 = EDGE_LOOP('',(#259620,#259631,#259639,#259648,#259656,#259665) + ); +#259620 = ORIENTED_EDGE('',*,*,#259621,.T.); +#259621 = EDGE_CURVE('',#259622,#259624,#259626,.T.); +#259622 = VERTEX_POINT('',#259623); +#259623 = CARTESIAN_POINT('',(168.1875,-131.154593,1.56)); +#259624 = VERTEX_POINT('',#259625); +#259625 = CARTESIAN_POINT('',(168.512513,-131.439933,1.56)); +#259626 = CIRCLE('',#259627,0.28758545494); +#259627 = AXIS2_PLACEMENT_3D('',#259628,#259629,#259630); +#259628 = CARTESIAN_POINT('',(168.47508538508,-131.154793442,1.56)); +#259629 = DIRECTION('',(0.,0.,1.)); +#259630 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#259631 = ORIENTED_EDGE('',*,*,#259632,.T.); +#259632 = EDGE_CURVE('',#259624,#259633,#259635,.T.); +#259633 = VERTEX_POINT('',#259634); +#259634 = CARTESIAN_POINT('',(168.58498,-131.420515,1.56)); +#259635 = LINE('',#259636,#259637); +#259636 = CARTESIAN_POINT('',(168.512513,-131.439933,1.56)); +#259637 = VECTOR('',#259638,1.); +#259638 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#259639 = ORIENTED_EDGE('',*,*,#259640,.T.); +#259640 = EDGE_CURVE('',#259633,#259641,#259643,.T.); +#259641 = VERTEX_POINT('',#259642); +#259642 = CARTESIAN_POINT('',(168.7625,-131.154593,1.56)); +#259643 = CIRCLE('',#259644,0.287686427939); +#259644 = AXIS2_PLACEMENT_3D('',#259645,#259646,#259647); +#259645 = CARTESIAN_POINT('',(168.4748136193,-131.1547578751,1.56)); +#259646 = DIRECTION('',(0.,0.,1.)); +#259647 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#259648 = ORIENTED_EDGE('',*,*,#259649,.T.); +#259649 = EDGE_CURVE('',#259641,#259650,#259652,.T.); +#259650 = VERTEX_POINT('',#259651); +#259651 = CARTESIAN_POINT('',(168.7625,-129.655406,1.56)); +#259652 = LINE('',#259653,#259654); +#259653 = CARTESIAN_POINT('',(168.7625,-131.154593,1.56)); +#259654 = VECTOR('',#259655,1.); +#259655 = DIRECTION('',(0.,1.,0.)); +#259656 = ORIENTED_EDGE('',*,*,#259657,.T.); +#259657 = EDGE_CURVE('',#259650,#259658,#259660,.T.); +#259658 = VERTEX_POINT('',#259659); +#259659 = CARTESIAN_POINT('',(168.1875,-129.655406,1.56)); +#259660 = CIRCLE('',#259661,0.287500026505); +#259661 = AXIS2_PLACEMENT_3D('',#259662,#259663,#259664); +#259662 = CARTESIAN_POINT('',(168.475,-129.6552825479,1.56)); +#259663 = DIRECTION('',(0.,0.,1.)); +#259664 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#259665 = ORIENTED_EDGE('',*,*,#259666,.T.); +#259666 = EDGE_CURVE('',#259658,#259622,#259667,.T.); +#259667 = LINE('',#259668,#259669); +#259668 = CARTESIAN_POINT('',(168.1875,-129.655406,1.56)); +#259669 = VECTOR('',#259670,1.); +#259670 = DIRECTION('',(0.,-1.,0.)); +#259671 = FACE_BOUND('',#259672,.F.); +#259672 = EDGE_LOOP('',(#259673)); +#259673 = ORIENTED_EDGE('',*,*,#259674,.T.); +#259674 = EDGE_CURVE('',#259675,#259675,#259677,.T.); +#259675 = VERTEX_POINT('',#259676); +#259676 = CARTESIAN_POINT('',(161.362254,-130.775,1.56)); +#259677 = CIRCLE('',#259678,0.187254); +#259678 = AXIS2_PLACEMENT_3D('',#259679,#259680,#259681); +#259679 = CARTESIAN_POINT('',(161.175,-130.775,1.56)); +#259680 = DIRECTION('',(0.,0.,1.)); +#259681 = DIRECTION('',(1.,0.,-0.)); +#259682 = FACE_BOUND('',#259683,.F.); +#259683 = EDGE_LOOP('',(#259684)); +#259684 = ORIENTED_EDGE('',*,*,#259685,.T.); +#259685 = EDGE_CURVE('',#259686,#259686,#259688,.T.); +#259686 = VERTEX_POINT('',#259687); +#259687 = CARTESIAN_POINT('',(162.212254,-130.775,1.56)); +#259688 = CIRCLE('',#259689,0.187254); +#259689 = AXIS2_PLACEMENT_3D('',#259690,#259691,#259692); +#259690 = CARTESIAN_POINT('',(162.025,-130.775,1.56)); +#259691 = DIRECTION('',(0.,0.,1.)); +#259692 = DIRECTION('',(1.,0.,-0.)); +#259693 = FACE_BOUND('',#259694,.F.); +#259694 = EDGE_LOOP('',(#259695)); +#259695 = ORIENTED_EDGE('',*,*,#259696,.T.); +#259696 = EDGE_CURVE('',#259697,#259697,#259699,.T.); +#259697 = VERTEX_POINT('',#259698); +#259698 = CARTESIAN_POINT('',(163.062254,-130.775,1.56)); +#259699 = CIRCLE('',#259700,0.187254); +#259700 = AXIS2_PLACEMENT_3D('',#259701,#259702,#259703); +#259701 = CARTESIAN_POINT('',(162.875,-130.775,1.56)); +#259702 = DIRECTION('',(0.,0.,1.)); +#259703 = DIRECTION('',(1.,0.,-0.)); +#259704 = FACE_BOUND('',#259705,.F.); +#259705 = EDGE_LOOP('',(#259706)); +#259706 = ORIENTED_EDGE('',*,*,#259707,.T.); +#259707 = EDGE_CURVE('',#259708,#259708,#259710,.T.); +#259708 = VERTEX_POINT('',#259709); +#259709 = CARTESIAN_POINT('',(163.912254,-130.775,1.56)); +#259710 = CIRCLE('',#259711,0.187254); +#259711 = AXIS2_PLACEMENT_3D('',#259712,#259713,#259714); +#259712 = CARTESIAN_POINT('',(163.725,-130.775,1.56)); +#259713 = DIRECTION('',(0.,0.,1.)); +#259714 = DIRECTION('',(1.,0.,-0.)); +#259715 = FACE_BOUND('',#259716,.F.); +#259716 = EDGE_LOOP('',(#259717)); +#259717 = ORIENTED_EDGE('',*,*,#259718,.T.); +#259718 = EDGE_CURVE('',#259719,#259719,#259721,.T.); +#259719 = VERTEX_POINT('',#259720); +#259720 = CARTESIAN_POINT('',(164.762254,-130.775,1.56)); +#259721 = CIRCLE('',#259722,0.187254); +#259722 = AXIS2_PLACEMENT_3D('',#259723,#259724,#259725); +#259723 = CARTESIAN_POINT('',(164.575,-130.775,1.56)); +#259724 = DIRECTION('',(0.,0.,1.)); +#259725 = DIRECTION('',(1.,0.,-0.)); +#259726 = FACE_BOUND('',#259727,.F.); +#259727 = EDGE_LOOP('',(#259728)); +#259728 = ORIENTED_EDGE('',*,*,#259729,.T.); +#259729 = EDGE_CURVE('',#259730,#259730,#259732,.T.); +#259730 = VERTEX_POINT('',#259731); +#259731 = CARTESIAN_POINT('',(165.612254,-130.775,1.56)); +#259732 = CIRCLE('',#259733,0.187254); +#259733 = AXIS2_PLACEMENT_3D('',#259734,#259735,#259736); +#259734 = CARTESIAN_POINT('',(165.425,-130.775,1.56)); +#259735 = DIRECTION('',(0.,0.,1.)); +#259736 = DIRECTION('',(1.,0.,-0.)); +#259737 = FACE_BOUND('',#259738,.F.); +#259738 = EDGE_LOOP('',(#259739)); +#259739 = ORIENTED_EDGE('',*,*,#259740,.T.); +#259740 = EDGE_CURVE('',#259741,#259741,#259743,.T.); +#259741 = VERTEX_POINT('',#259742); +#259742 = CARTESIAN_POINT('',(166.462254,-130.775,1.56)); +#259743 = CIRCLE('',#259744,0.187254); +#259744 = AXIS2_PLACEMENT_3D('',#259745,#259746,#259747); +#259745 = CARTESIAN_POINT('',(166.275,-130.775,1.56)); +#259746 = DIRECTION('',(0.,0.,1.)); +#259747 = DIRECTION('',(1.,0.,-0.)); +#259748 = FACE_BOUND('',#259749,.F.); +#259749 = EDGE_LOOP('',(#259750)); +#259750 = ORIENTED_EDGE('',*,*,#259751,.T.); +#259751 = EDGE_CURVE('',#259752,#259752,#259754,.T.); +#259752 = VERTEX_POINT('',#259753); +#259753 = CARTESIAN_POINT('',(167.312254,-130.775,1.56)); +#259754 = CIRCLE('',#259755,0.187254); +#259755 = AXIS2_PLACEMENT_3D('',#259756,#259757,#259758); +#259756 = CARTESIAN_POINT('',(167.125,-130.775,1.56)); +#259757 = DIRECTION('',(0.,0.,1.)); +#259758 = DIRECTION('',(1.,0.,-0.)); +#259759 = FACE_BOUND('',#259760,.F.); +#259760 = EDGE_LOOP('',(#259761)); +#259761 = ORIENTED_EDGE('',*,*,#259762,.T.); +#259762 = EDGE_CURVE('',#259763,#259763,#259765,.T.); +#259763 = VERTEX_POINT('',#259764); +#259764 = CARTESIAN_POINT('',(115.739042,-129.5831,1.56)); +#259765 = CIRCLE('',#259766,0.487392); +#259766 = AXIS2_PLACEMENT_3D('',#259767,#259768,#259769); +#259767 = CARTESIAN_POINT('',(115.25165,-129.5831,1.56)); +#259768 = DIRECTION('',(0.,0.,1.)); +#259769 = DIRECTION('',(1.,0.,-0.)); +#259770 = FACE_BOUND('',#259771,.F.); +#259771 = EDGE_LOOP('',(#259772)); +#259772 = ORIENTED_EDGE('',*,*,#259773,.T.); +#259773 = EDGE_CURVE('',#259774,#259774,#259776,.T.); +#259774 = VERTEX_POINT('',#259775); +#259775 = CARTESIAN_POINT('',(118.279042,-129.5831,1.56)); +#259776 = CIRCLE('',#259777,0.487392); +#259777 = AXIS2_PLACEMENT_3D('',#259778,#259779,#259780); +#259778 = CARTESIAN_POINT('',(117.79165,-129.5831,1.56)); +#259779 = DIRECTION('',(0.,0.,1.)); +#259780 = DIRECTION('',(1.,0.,-0.)); +#259781 = FACE_BOUND('',#259782,.F.); +#259782 = EDGE_LOOP('',(#259783)); +#259783 = ORIENTED_EDGE('',*,*,#259784,.T.); +#259784 = EDGE_CURVE('',#259785,#259785,#259787,.T.); +#259785 = VERTEX_POINT('',#259786); +#259786 = CARTESIAN_POINT('',(120.819042,-129.5831,1.56)); +#259787 = CIRCLE('',#259788,0.487392); +#259788 = AXIS2_PLACEMENT_3D('',#259789,#259790,#259791); +#259789 = CARTESIAN_POINT('',(120.33165,-129.5831,1.56)); +#259790 = DIRECTION('',(0.,0.,1.)); +#259791 = DIRECTION('',(1.,0.,-0.)); +#259792 = FACE_BOUND('',#259793,.F.); +#259793 = EDGE_LOOP('',(#259794)); +#259794 = ORIENTED_EDGE('',*,*,#259795,.T.); +#259795 = EDGE_CURVE('',#259796,#259796,#259798,.T.); +#259796 = VERTEX_POINT('',#259797); +#259797 = CARTESIAN_POINT('',(123.359042,-129.5831,1.56)); +#259798 = CIRCLE('',#259799,0.487392); +#259799 = AXIS2_PLACEMENT_3D('',#259800,#259801,#259802); +#259800 = CARTESIAN_POINT('',(122.87165,-129.5831,1.56)); +#259801 = DIRECTION('',(0.,0.,1.)); +#259802 = DIRECTION('',(1.,0.,-0.)); +#259803 = FACE_BOUND('',#259804,.F.); +#259804 = EDGE_LOOP('',(#259805)); +#259805 = ORIENTED_EDGE('',*,*,#259806,.T.); +#259806 = EDGE_CURVE('',#259807,#259807,#259809,.T.); +#259807 = VERTEX_POINT('',#259808); +#259808 = CARTESIAN_POINT('',(125.899042,-129.5831,1.56)); +#259809 = CIRCLE('',#259810,0.487392); +#259810 = AXIS2_PLACEMENT_3D('',#259811,#259812,#259813); +#259811 = CARTESIAN_POINT('',(125.41165,-129.5831,1.56)); +#259812 = DIRECTION('',(0.,0.,1.)); +#259813 = DIRECTION('',(1.,0.,-0.)); +#259814 = FACE_BOUND('',#259815,.F.); +#259815 = EDGE_LOOP('',(#259816)); +#259816 = ORIENTED_EDGE('',*,*,#259817,.T.); +#259817 = EDGE_CURVE('',#259818,#259818,#259820,.T.); +#259818 = VERTEX_POINT('',#259819); +#259819 = CARTESIAN_POINT('',(128.439042,-129.5831,1.56)); +#259820 = CIRCLE('',#259821,0.487392); +#259821 = AXIS2_PLACEMENT_3D('',#259822,#259823,#259824); +#259822 = CARTESIAN_POINT('',(127.95165,-129.5831,1.56)); +#259823 = DIRECTION('',(0.,0.,1.)); +#259824 = DIRECTION('',(1.,0.,-0.)); +#259825 = FACE_BOUND('',#259826,.F.); +#259826 = EDGE_LOOP('',(#259827)); +#259827 = ORIENTED_EDGE('',*,*,#259828,.T.); +#259828 = EDGE_CURVE('',#259829,#259829,#259831,.T.); +#259829 = VERTEX_POINT('',#259830); +#259830 = CARTESIAN_POINT('',(130.979042,-129.5831,1.56)); +#259831 = CIRCLE('',#259832,0.487392); +#259832 = AXIS2_PLACEMENT_3D('',#259833,#259834,#259835); +#259833 = CARTESIAN_POINT('',(130.49165,-129.5831,1.56)); +#259834 = DIRECTION('',(0.,0.,1.)); +#259835 = DIRECTION('',(1.,0.,-0.)); +#259836 = FACE_BOUND('',#259837,.F.); +#259837 = EDGE_LOOP('',(#259838)); +#259838 = ORIENTED_EDGE('',*,*,#259839,.T.); +#259839 = EDGE_CURVE('',#259840,#259840,#259842,.T.); +#259840 = VERTEX_POINT('',#259841); +#259841 = CARTESIAN_POINT('',(133.519042,-129.5831,1.56)); +#259842 = CIRCLE('',#259843,0.487392); +#259843 = AXIS2_PLACEMENT_3D('',#259844,#259845,#259846); +#259844 = CARTESIAN_POINT('',(133.03165,-129.5831,1.56)); +#259845 = DIRECTION('',(0.,0.,1.)); +#259846 = DIRECTION('',(1.,0.,-0.)); +#259847 = FACE_BOUND('',#259848,.F.); +#259848 = EDGE_LOOP('',(#259849)); +#259849 = ORIENTED_EDGE('',*,*,#259850,.T.); +#259850 = EDGE_CURVE('',#259851,#259851,#259853,.T.); +#259851 = VERTEX_POINT('',#259852); +#259852 = CARTESIAN_POINT('',(138.599042,-129.5831,1.56)); +#259853 = CIRCLE('',#259854,0.487392); +#259854 = AXIS2_PLACEMENT_3D('',#259855,#259856,#259857); +#259855 = CARTESIAN_POINT('',(138.11165,-129.5831,1.56)); +#259856 = DIRECTION('',(0.,0.,1.)); +#259857 = DIRECTION('',(1.,0.,-0.)); +#259858 = FACE_BOUND('',#259859,.F.); +#259859 = EDGE_LOOP('',(#259860)); +#259860 = ORIENTED_EDGE('',*,*,#259861,.T.); +#259861 = EDGE_CURVE('',#259862,#259862,#259864,.T.); +#259862 = VERTEX_POINT('',#259863); +#259863 = CARTESIAN_POINT('',(141.139042,-129.5831,1.56)); +#259864 = CIRCLE('',#259865,0.487392); +#259865 = AXIS2_PLACEMENT_3D('',#259866,#259867,#259868); +#259866 = CARTESIAN_POINT('',(140.65165,-129.5831,1.56)); +#259867 = DIRECTION('',(0.,0.,1.)); +#259868 = DIRECTION('',(1.,0.,-0.)); +#259869 = FACE_BOUND('',#259870,.F.); +#259870 = EDGE_LOOP('',(#259871)); +#259871 = ORIENTED_EDGE('',*,*,#259872,.T.); +#259872 = EDGE_CURVE('',#259873,#259873,#259875,.T.); +#259873 = VERTEX_POINT('',#259874); +#259874 = CARTESIAN_POINT('',(143.679042,-129.5831,1.56)); +#259875 = CIRCLE('',#259876,0.487392); +#259876 = AXIS2_PLACEMENT_3D('',#259877,#259878,#259879); +#259877 = CARTESIAN_POINT('',(143.19165,-129.5831,1.56)); +#259878 = DIRECTION('',(0.,0.,1.)); +#259879 = DIRECTION('',(1.,0.,-0.)); +#259880 = FACE_BOUND('',#259881,.F.); +#259881 = EDGE_LOOP('',(#259882)); +#259882 = ORIENTED_EDGE('',*,*,#259883,.T.); +#259883 = EDGE_CURVE('',#259884,#259884,#259886,.T.); +#259884 = VERTEX_POINT('',#259885); +#259885 = CARTESIAN_POINT('',(146.219042,-129.5831,1.56)); +#259886 = CIRCLE('',#259887,0.487392); +#259887 = AXIS2_PLACEMENT_3D('',#259888,#259889,#259890); +#259888 = CARTESIAN_POINT('',(145.73165,-129.5831,1.56)); +#259889 = DIRECTION('',(0.,0.,1.)); +#259890 = DIRECTION('',(1.,0.,-0.)); +#259891 = FACE_BOUND('',#259892,.F.); +#259892 = EDGE_LOOP('',(#259893)); +#259893 = ORIENTED_EDGE('',*,*,#259894,.T.); +#259894 = EDGE_CURVE('',#259895,#259895,#259897,.T.); +#259895 = VERTEX_POINT('',#259896); +#259896 = CARTESIAN_POINT('',(148.759042,-129.5831,1.56)); +#259897 = CIRCLE('',#259898,0.487392); +#259898 = AXIS2_PLACEMENT_3D('',#259899,#259900,#259901); +#259899 = CARTESIAN_POINT('',(148.27165,-129.5831,1.56)); +#259900 = DIRECTION('',(0.,0.,1.)); +#259901 = DIRECTION('',(1.,0.,-0.)); +#259902 = FACE_BOUND('',#259903,.F.); +#259903 = EDGE_LOOP('',(#259904)); +#259904 = ORIENTED_EDGE('',*,*,#259905,.T.); +#259905 = EDGE_CURVE('',#259906,#259906,#259908,.T.); +#259906 = VERTEX_POINT('',#259907); +#259907 = CARTESIAN_POINT('',(151.299042,-129.5831,1.56)); +#259908 = CIRCLE('',#259909,0.487392); +#259909 = AXIS2_PLACEMENT_3D('',#259910,#259911,#259912); +#259910 = CARTESIAN_POINT('',(150.81165,-129.5831,1.56)); +#259911 = DIRECTION('',(0.,0.,1.)); +#259912 = DIRECTION('',(1.,0.,-0.)); +#259913 = FACE_BOUND('',#259914,.F.); +#259914 = EDGE_LOOP('',(#259915)); +#259915 = ORIENTED_EDGE('',*,*,#259916,.T.); +#259916 = EDGE_CURVE('',#259917,#259917,#259919,.T.); +#259917 = VERTEX_POINT('',#259918); +#259918 = CARTESIAN_POINT('',(161.362254,-129.425,1.56)); +#259919 = CIRCLE('',#259920,0.187254); +#259920 = AXIS2_PLACEMENT_3D('',#259921,#259922,#259923); +#259921 = CARTESIAN_POINT('',(161.175,-129.425,1.56)); +#259922 = DIRECTION('',(0.,0.,1.)); +#259923 = DIRECTION('',(1.,0.,-0.)); +#259924 = FACE_BOUND('',#259925,.F.); +#259925 = EDGE_LOOP('',(#259926)); +#259926 = ORIENTED_EDGE('',*,*,#259927,.T.); +#259927 = EDGE_CURVE('',#259928,#259928,#259930,.T.); +#259928 = VERTEX_POINT('',#259929); +#259929 = CARTESIAN_POINT('',(162.212254,-129.425,1.56)); +#259930 = CIRCLE('',#259931,0.187254); +#259931 = AXIS2_PLACEMENT_3D('',#259932,#259933,#259934); +#259932 = CARTESIAN_POINT('',(162.025,-129.425,1.56)); +#259933 = DIRECTION('',(0.,0.,1.)); +#259934 = DIRECTION('',(1.,0.,-0.)); +#259935 = FACE_BOUND('',#259936,.F.); +#259936 = EDGE_LOOP('',(#259937)); +#259937 = ORIENTED_EDGE('',*,*,#259938,.T.); +#259938 = EDGE_CURVE('',#259939,#259939,#259941,.T.); +#259939 = VERTEX_POINT('',#259940); +#259940 = CARTESIAN_POINT('',(163.062254,-129.425,1.56)); +#259941 = CIRCLE('',#259942,0.187254); +#259942 = AXIS2_PLACEMENT_3D('',#259943,#259944,#259945); +#259943 = CARTESIAN_POINT('',(162.875,-129.425,1.56)); +#259944 = DIRECTION('',(0.,0.,1.)); +#259945 = DIRECTION('',(1.,0.,-0.)); +#259946 = FACE_BOUND('',#259947,.F.); +#259947 = EDGE_LOOP('',(#259948)); +#259948 = ORIENTED_EDGE('',*,*,#259949,.T.); +#259949 = EDGE_CURVE('',#259950,#259950,#259952,.T.); +#259950 = VERTEX_POINT('',#259951); +#259951 = CARTESIAN_POINT('',(163.912254,-129.425,1.56)); +#259952 = CIRCLE('',#259953,0.187254); +#259953 = AXIS2_PLACEMENT_3D('',#259954,#259955,#259956); +#259954 = CARTESIAN_POINT('',(163.725,-129.425,1.56)); +#259955 = DIRECTION('',(0.,0.,1.)); +#259956 = DIRECTION('',(1.,0.,-0.)); +#259957 = FACE_BOUND('',#259958,.F.); +#259958 = EDGE_LOOP('',(#259959)); +#259959 = ORIENTED_EDGE('',*,*,#259960,.T.); +#259960 = EDGE_CURVE('',#259961,#259961,#259963,.T.); +#259961 = VERTEX_POINT('',#259962); +#259962 = CARTESIAN_POINT('',(164.762254,-129.425,1.56)); +#259963 = CIRCLE('',#259964,0.187254); +#259964 = AXIS2_PLACEMENT_3D('',#259965,#259966,#259967); +#259965 = CARTESIAN_POINT('',(164.575,-129.425,1.56)); +#259966 = DIRECTION('',(0.,0.,1.)); +#259967 = DIRECTION('',(1.,0.,-0.)); +#259968 = FACE_BOUND('',#259969,.F.); +#259969 = EDGE_LOOP('',(#259970)); +#259970 = ORIENTED_EDGE('',*,*,#259971,.T.); +#259971 = EDGE_CURVE('',#259972,#259972,#259974,.T.); +#259972 = VERTEX_POINT('',#259973); +#259973 = CARTESIAN_POINT('',(165.612254,-129.425,1.56)); +#259974 = CIRCLE('',#259975,0.187254); +#259975 = AXIS2_PLACEMENT_3D('',#259976,#259977,#259978); +#259976 = CARTESIAN_POINT('',(165.425,-129.425,1.56)); +#259977 = DIRECTION('',(0.,0.,1.)); +#259978 = DIRECTION('',(1.,0.,-0.)); +#259979 = FACE_BOUND('',#259980,.F.); +#259980 = EDGE_LOOP('',(#259981)); +#259981 = ORIENTED_EDGE('',*,*,#259982,.T.); +#259982 = EDGE_CURVE('',#259983,#259983,#259985,.T.); +#259983 = VERTEX_POINT('',#259984); +#259984 = CARTESIAN_POINT('',(166.462254,-129.425,1.56)); +#259985 = CIRCLE('',#259986,0.187254); +#259986 = AXIS2_PLACEMENT_3D('',#259987,#259988,#259989); +#259987 = CARTESIAN_POINT('',(166.275,-129.425,1.56)); +#259988 = DIRECTION('',(0.,0.,1.)); +#259989 = DIRECTION('',(1.,0.,-0.)); +#259990 = FACE_BOUND('',#259991,.F.); +#259991 = EDGE_LOOP('',(#259992)); +#259992 = ORIENTED_EDGE('',*,*,#259993,.T.); +#259993 = EDGE_CURVE('',#259994,#259994,#259996,.T.); +#259994 = VERTEX_POINT('',#259995); +#259995 = CARTESIAN_POINT('',(167.312254,-129.425,1.56)); +#259996 = CIRCLE('',#259997,0.187254); +#259997 = AXIS2_PLACEMENT_3D('',#259998,#259999,#260000); +#259998 = CARTESIAN_POINT('',(167.125,-129.425,1.56)); +#259999 = DIRECTION('',(0.,0.,1.)); +#260000 = DIRECTION('',(1.,0.,-0.)); +#260001 = FACE_BOUND('',#260002,.F.); +#260002 = EDGE_LOOP('',(#260003)); +#260003 = ORIENTED_EDGE('',*,*,#260004,.T.); +#260004 = EDGE_CURVE('',#260005,#260005,#260007,.T.); +#260005 = VERTEX_POINT('',#260006); +#260006 = CARTESIAN_POINT('',(210.679042,-121.3231,1.56)); +#260007 = CIRCLE('',#260008,0.487392); +#260008 = AXIS2_PLACEMENT_3D('',#260009,#260010,#260011); +#260009 = CARTESIAN_POINT('',(210.19165,-121.3231,1.56)); +#260010 = DIRECTION('',(0.,0.,1.)); +#260011 = DIRECTION('',(1.,0.,-0.)); +#260012 = FACE_BOUND('',#260013,.F.); +#260013 = EDGE_LOOP('',(#260014)); +#260014 = ORIENTED_EDGE('',*,*,#260015,.T.); +#260015 = EDGE_CURVE('',#260016,#260016,#260018,.T.); +#260016 = VERTEX_POINT('',#260017); +#260017 = CARTESIAN_POINT('',(210.679042,-118.8231,1.56)); +#260018 = CIRCLE('',#260019,0.487392); +#260019 = AXIS2_PLACEMENT_3D('',#260020,#260021,#260022); +#260020 = CARTESIAN_POINT('',(210.19165,-118.8231,1.56)); +#260021 = DIRECTION('',(0.,0.,1.)); +#260022 = DIRECTION('',(1.,0.,-0.)); +#260023 = FACE_BOUND('',#260024,.F.); +#260024 = EDGE_LOOP('',(#260025)); +#260025 = ORIENTED_EDGE('',*,*,#260026,.T.); +#260026 = EDGE_CURVE('',#260027,#260027,#260029,.T.); +#260027 = VERTEX_POINT('',#260028); +#260028 = CARTESIAN_POINT('',(210.654042,-108.3231,1.56)); +#260029 = CIRCLE('',#260030,0.462392); +#260030 = AXIS2_PLACEMENT_3D('',#260031,#260032,#260033); +#260031 = CARTESIAN_POINT('',(210.19165,-108.3231,1.56)); +#260032 = DIRECTION('',(0.,0.,1.)); +#260033 = DIRECTION('',(1.,0.,-0.)); +#260034 = FACE_BOUND('',#260035,.F.); +#260035 = EDGE_LOOP('',(#260036)); +#260036 = ORIENTED_EDGE('',*,*,#260037,.T.); +#260037 = EDGE_CURVE('',#260038,#260038,#260040,.T.); +#260038 = VERTEX_POINT('',#260039); +#260039 = CARTESIAN_POINT('',(210.654042,-105.8231,1.56)); +#260040 = CIRCLE('',#260041,0.462392); +#260041 = AXIS2_PLACEMENT_3D('',#260042,#260043,#260044); +#260042 = CARTESIAN_POINT('',(210.19165,-105.8231,1.56)); +#260043 = DIRECTION('',(0.,0.,1.)); +#260044 = DIRECTION('',(1.,0.,-0.)); +#260045 = FACE_BOUND('',#260046,.F.); +#260046 = EDGE_LOOP('',(#260047)); +#260047 = ORIENTED_EDGE('',*,*,#260048,.T.); +#260048 = EDGE_CURVE('',#260049,#260049,#260051,.T.); +#260049 = VERTEX_POINT('',#260050); +#260050 = CARTESIAN_POINT('',(210.654042,-103.3231,1.56)); +#260051 = CIRCLE('',#260052,0.462392); +#260052 = AXIS2_PLACEMENT_3D('',#260053,#260054,#260055); +#260053 = CARTESIAN_POINT('',(210.19165,-103.3231,1.56)); +#260054 = DIRECTION('',(0.,0.,1.)); +#260055 = DIRECTION('',(1.,0.,-0.)); +#260056 = FACE_BOUND('',#260057,.F.); +#260057 = EDGE_LOOP('',(#260058,#260068,#260076,#260084)); +#260058 = ORIENTED_EDGE('',*,*,#260059,.T.); +#260059 = EDGE_CURVE('',#260060,#260062,#260064,.T.); +#260060 = VERTEX_POINT('',#260061); +#260061 = CARTESIAN_POINT('',(142.14165,-100.5731,1.56)); +#260062 = VERTEX_POINT('',#260063); +#260063 = CARTESIAN_POINT('',(142.14165,-99.0731,1.56)); +#260064 = LINE('',#260065,#260066); +#260065 = CARTESIAN_POINT('',(142.14165,-100.5731,1.56)); +#260066 = VECTOR('',#260067,1.); +#260067 = DIRECTION('',(0.,1.,0.)); +#260068 = ORIENTED_EDGE('',*,*,#260069,.T.); +#260069 = EDGE_CURVE('',#260062,#260070,#260072,.T.); +#260070 = VERTEX_POINT('',#260071); +#260071 = CARTESIAN_POINT('',(140.64165,-99.0731,1.56)); +#260072 = LINE('',#260073,#260074); +#260073 = CARTESIAN_POINT('',(142.14165,-99.0731,1.56)); +#260074 = VECTOR('',#260075,1.); +#260075 = DIRECTION('',(-1.,0.,0.)); +#260076 = ORIENTED_EDGE('',*,*,#260077,.T.); +#260077 = EDGE_CURVE('',#260070,#260078,#260080,.T.); +#260078 = VERTEX_POINT('',#260079); +#260079 = CARTESIAN_POINT('',(140.64165,-100.5731,1.56)); +#260080 = LINE('',#260081,#260082); +#260081 = CARTESIAN_POINT('',(140.64165,-99.0731,1.56)); +#260082 = VECTOR('',#260083,1.); +#260083 = DIRECTION('',(0.,-1.,0.)); +#260084 = ORIENTED_EDGE('',*,*,#260085,.T.); +#260085 = EDGE_CURVE('',#260078,#260060,#260086,.T.); +#260086 = LINE('',#260087,#260088); +#260087 = CARTESIAN_POINT('',(140.64165,-100.5731,1.56)); +#260088 = VECTOR('',#260089,1.); +#260089 = DIRECTION('',(1.,0.,0.)); +#260090 = FACE_BOUND('',#260091,.F.); +#260091 = EDGE_LOOP('',(#260092)); +#260092 = ORIENTED_EDGE('',*,*,#260093,.T.); +#260093 = EDGE_CURVE('',#260094,#260094,#260096,.T.); +#260094 = VERTEX_POINT('',#260095); +#260095 = CARTESIAN_POINT('',(210.654042,-95.3231,1.56)); +#260096 = CIRCLE('',#260097,0.462392); +#260097 = AXIS2_PLACEMENT_3D('',#260098,#260099,#260100); +#260098 = CARTESIAN_POINT('',(210.19165,-95.3231,1.56)); +#260099 = DIRECTION('',(0.,0.,1.)); +#260100 = DIRECTION('',(1.,0.,-0.)); +#260101 = FACE_BOUND('',#260102,.F.); +#260102 = EDGE_LOOP('',(#260103,#260113,#260121,#260129)); +#260103 = ORIENTED_EDGE('',*,*,#260104,.T.); +#260104 = EDGE_CURVE('',#260105,#260107,#260109,.T.); +#260105 = VERTEX_POINT('',#260106); +#260106 = CARTESIAN_POINT('',(142.14165,-95.5731,1.56)); +#260107 = VERTEX_POINT('',#260108); +#260108 = CARTESIAN_POINT('',(142.14165,-94.0731,1.56)); +#260109 = LINE('',#260110,#260111); +#260110 = CARTESIAN_POINT('',(142.14165,-95.5731,1.56)); +#260111 = VECTOR('',#260112,1.); +#260112 = DIRECTION('',(0.,1.,0.)); +#260113 = ORIENTED_EDGE('',*,*,#260114,.T.); +#260114 = EDGE_CURVE('',#260107,#260115,#260117,.T.); +#260115 = VERTEX_POINT('',#260116); +#260116 = CARTESIAN_POINT('',(140.64165,-94.0731,1.56)); +#260117 = LINE('',#260118,#260119); +#260118 = CARTESIAN_POINT('',(142.14165,-94.0731,1.56)); +#260119 = VECTOR('',#260120,1.); +#260120 = DIRECTION('',(-1.,0.,0.)); +#260121 = ORIENTED_EDGE('',*,*,#260122,.T.); +#260122 = EDGE_CURVE('',#260115,#260123,#260125,.T.); +#260123 = VERTEX_POINT('',#260124); +#260124 = CARTESIAN_POINT('',(140.64165,-95.5731,1.56)); +#260125 = LINE('',#260126,#260127); +#260126 = CARTESIAN_POINT('',(140.64165,-94.0731,1.56)); +#260127 = VECTOR('',#260128,1.); +#260128 = DIRECTION('',(0.,-1.,0.)); +#260129 = ORIENTED_EDGE('',*,*,#260130,.T.); +#260130 = EDGE_CURVE('',#260123,#260105,#260131,.T.); +#260131 = LINE('',#260132,#260133); +#260132 = CARTESIAN_POINT('',(140.64165,-95.5731,1.56)); +#260133 = VECTOR('',#260134,1.); +#260134 = DIRECTION('',(1.,0.,0.)); +#260135 = FACE_BOUND('',#260136,.F.); +#260136 = EDGE_LOOP('',(#260137)); +#260137 = ORIENTED_EDGE('',*,*,#260138,.T.); +#260138 = EDGE_CURVE('',#260139,#260139,#260141,.T.); +#260139 = VERTEX_POINT('',#260140); +#260140 = CARTESIAN_POINT('',(210.654042,-92.8231,1.56)); +#260141 = CIRCLE('',#260142,0.462392); +#260142 = AXIS2_PLACEMENT_3D('',#260143,#260144,#260145); +#260143 = CARTESIAN_POINT('',(210.19165,-92.8231,1.56)); +#260144 = DIRECTION('',(0.,0.,1.)); +#260145 = DIRECTION('',(1.,0.,-0.)); +#260146 = FACE_BOUND('',#260147,.F.); +#260147 = EDGE_LOOP('',(#260148)); +#260148 = ORIENTED_EDGE('',*,*,#260149,.T.); +#260149 = EDGE_CURVE('',#260150,#260150,#260152,.T.); +#260150 = VERTEX_POINT('',#260151); +#260151 = CARTESIAN_POINT('',(174.579042,-92.8231,1.56)); +#260152 = CIRCLE('',#260153,0.387392); +#260153 = AXIS2_PLACEMENT_3D('',#260154,#260155,#260156); +#260154 = CARTESIAN_POINT('',(174.19165,-92.8231,1.56)); +#260155 = DIRECTION('',(0.,0.,1.)); +#260156 = DIRECTION('',(1.,0.,-0.)); +#260157 = FACE_BOUND('',#260158,.F.); +#260158 = EDGE_LOOP('',(#260159)); +#260159 = ORIENTED_EDGE('',*,*,#260160,.T.); +#260160 = EDGE_CURVE('',#260161,#260161,#260163,.T.); +#260161 = VERTEX_POINT('',#260162); +#260162 = CARTESIAN_POINT('',(196.929042,-92.8231,1.56)); +#260163 = CIRCLE('',#260164,0.387392); +#260164 = AXIS2_PLACEMENT_3D('',#260165,#260166,#260167); +#260165 = CARTESIAN_POINT('',(196.54165,-92.8231,1.56)); +#260166 = DIRECTION('',(0.,0.,1.)); +#260167 = DIRECTION('',(1.,0.,-0.)); +#260168 = FACE_BOUND('',#260169,.F.); +#260169 = EDGE_LOOP('',(#260170)); +#260170 = ORIENTED_EDGE('',*,*,#260171,.T.); +#260171 = EDGE_CURVE('',#260172,#260172,#260174,.T.); +#260172 = VERTEX_POINT('',#260173); +#260173 = CARTESIAN_POINT('',(174.579042,-90.8231,1.56)); +#260174 = CIRCLE('',#260175,0.387392); +#260175 = AXIS2_PLACEMENT_3D('',#260176,#260177,#260178); +#260176 = CARTESIAN_POINT('',(174.19165,-90.8231,1.56)); +#260177 = DIRECTION('',(0.,0.,1.)); +#260178 = DIRECTION('',(1.,0.,-0.)); +#260179 = FACE_BOUND('',#260180,.F.); +#260180 = EDGE_LOOP('',(#260181)); +#260181 = ORIENTED_EDGE('',*,*,#260182,.T.); +#260182 = EDGE_CURVE('',#260183,#260183,#260185,.T.); +#260183 = VERTEX_POINT('',#260184); +#260184 = CARTESIAN_POINT('',(196.929042,-90.8231,1.56)); +#260185 = CIRCLE('',#260186,0.387392); +#260186 = AXIS2_PLACEMENT_3D('',#260187,#260188,#260189); +#260187 = CARTESIAN_POINT('',(196.54165,-90.8231,1.56)); +#260188 = DIRECTION('',(0.,0.,1.)); +#260189 = DIRECTION('',(1.,0.,-0.)); +#260190 = FACE_BOUND('',#260191,.F.); +#260191 = EDGE_LOOP('',(#260192,#260202,#260210,#260218)); +#260192 = ORIENTED_EDGE('',*,*,#260193,.T.); +#260193 = EDGE_CURVE('',#260194,#260196,#260198,.T.); +#260194 = VERTEX_POINT('',#260195); +#260195 = CARTESIAN_POINT('',(142.14165,-91.0731,1.56)); +#260196 = VERTEX_POINT('',#260197); +#260197 = CARTESIAN_POINT('',(142.14165,-89.5731,1.56)); +#260198 = LINE('',#260199,#260200); +#260199 = CARTESIAN_POINT('',(142.14165,-91.0731,1.56)); +#260200 = VECTOR('',#260201,1.); +#260201 = DIRECTION('',(0.,1.,0.)); +#260202 = ORIENTED_EDGE('',*,*,#260203,.T.); +#260203 = EDGE_CURVE('',#260196,#260204,#260206,.T.); +#260204 = VERTEX_POINT('',#260205); +#260205 = CARTESIAN_POINT('',(140.64165,-89.5731,1.56)); +#260206 = LINE('',#260207,#260208); +#260207 = CARTESIAN_POINT('',(142.14165,-89.5731,1.56)); +#260208 = VECTOR('',#260209,1.); +#260209 = DIRECTION('',(-1.,0.,0.)); +#260210 = ORIENTED_EDGE('',*,*,#260211,.T.); +#260211 = EDGE_CURVE('',#260204,#260212,#260214,.T.); +#260212 = VERTEX_POINT('',#260213); +#260213 = CARTESIAN_POINT('',(140.64165,-91.0731,1.56)); +#260214 = LINE('',#260215,#260216); +#260215 = CARTESIAN_POINT('',(140.64165,-89.5731,1.56)); +#260216 = VECTOR('',#260217,1.); +#260217 = DIRECTION('',(0.,-1.,0.)); +#260218 = ORIENTED_EDGE('',*,*,#260219,.T.); +#260219 = EDGE_CURVE('',#260212,#260194,#260220,.T.); +#260220 = LINE('',#260221,#260222); +#260221 = CARTESIAN_POINT('',(140.64165,-91.0731,1.56)); +#260222 = VECTOR('',#260223,1.); +#260223 = DIRECTION('',(1.,0.,0.)); +#260224 = FACE_BOUND('',#260225,.F.); +#260225 = EDGE_LOOP('',(#260226)); +#260226 = ORIENTED_EDGE('',*,*,#260227,.T.); +#260227 = EDGE_CURVE('',#260228,#260228,#260230,.T.); +#260228 = VERTEX_POINT('',#260229); +#260229 = CARTESIAN_POINT('',(210.654042,-90.3231,1.56)); +#260230 = CIRCLE('',#260231,0.462392); +#260231 = AXIS2_PLACEMENT_3D('',#260232,#260233,#260234); +#260232 = CARTESIAN_POINT('',(210.19165,-90.3231,1.56)); +#260233 = DIRECTION('',(0.,0.,1.)); +#260234 = DIRECTION('',(1.,0.,-0.)); +#260235 = FACE_BOUND('',#260236,.F.); +#260236 = EDGE_LOOP('',(#260237)); +#260237 = ORIENTED_EDGE('',*,*,#260238,.T.); +#260238 = EDGE_CURVE('',#260239,#260239,#260241,.T.); +#260239 = VERTEX_POINT('',#260240); +#260240 = CARTESIAN_POINT('',(174.579042,-88.8231,1.56)); +#260241 = CIRCLE('',#260242,0.387392); +#260242 = AXIS2_PLACEMENT_3D('',#260243,#260244,#260245); +#260243 = CARTESIAN_POINT('',(174.19165,-88.8231,1.56)); +#260244 = DIRECTION('',(0.,0.,1.)); +#260245 = DIRECTION('',(1.,0.,-0.)); +#260246 = FACE_BOUND('',#260247,.F.); +#260247 = EDGE_LOOP('',(#260248)); +#260248 = ORIENTED_EDGE('',*,*,#260249,.T.); +#260249 = EDGE_CURVE('',#260250,#260250,#260252,.T.); +#260250 = VERTEX_POINT('',#260251); +#260251 = CARTESIAN_POINT('',(196.929042,-88.8231,1.56)); +#260252 = CIRCLE('',#260253,0.387392); +#260253 = AXIS2_PLACEMENT_3D('',#260254,#260255,#260256); +#260254 = CARTESIAN_POINT('',(196.54165,-88.8231,1.56)); +#260255 = DIRECTION('',(0.,0.,1.)); +#260256 = DIRECTION('',(1.,0.,-0.)); +#260257 = FACE_BOUND('',#260258,.F.); +#260258 = EDGE_LOOP('',(#260259)); +#260259 = ORIENTED_EDGE('',*,*,#260260,.T.); +#260260 = EDGE_CURVE('',#260261,#260261,#260263,.T.); +#260261 = VERTEX_POINT('',#260262); +#260262 = CARTESIAN_POINT('',(210.654042,-87.8231,1.56)); +#260263 = CIRCLE('',#260264,0.462392); +#260264 = AXIS2_PLACEMENT_3D('',#260265,#260266,#260267); +#260265 = CARTESIAN_POINT('',(210.19165,-87.8231,1.56)); +#260266 = DIRECTION('',(0.,0.,1.)); +#260267 = DIRECTION('',(1.,0.,-0.)); +#260268 = FACE_BOUND('',#260269,.F.); +#260269 = EDGE_LOOP('',(#260270)); +#260270 = ORIENTED_EDGE('',*,*,#260271,.T.); +#260271 = EDGE_CURVE('',#260272,#260272,#260274,.T.); +#260272 = VERTEX_POINT('',#260273); +#260273 = CARTESIAN_POINT('',(174.579042,-86.8231,1.56)); +#260274 = CIRCLE('',#260275,0.387392); +#260275 = AXIS2_PLACEMENT_3D('',#260276,#260277,#260278); +#260276 = CARTESIAN_POINT('',(174.19165,-86.8231,1.56)); +#260277 = DIRECTION('',(0.,0.,1.)); +#260278 = DIRECTION('',(1.,0.,-0.)); +#260279 = FACE_BOUND('',#260280,.F.); +#260280 = EDGE_LOOP('',(#260281)); +#260281 = ORIENTED_EDGE('',*,*,#260282,.T.); +#260282 = EDGE_CURVE('',#260283,#260283,#260285,.T.); +#260283 = VERTEX_POINT('',#260284); +#260284 = CARTESIAN_POINT('',(196.929042,-86.8231,1.56)); +#260285 = CIRCLE('',#260286,0.387392); +#260286 = AXIS2_PLACEMENT_3D('',#260287,#260288,#260289); +#260287 = CARTESIAN_POINT('',(196.54165,-86.8231,1.56)); +#260288 = DIRECTION('',(0.,0.,1.)); +#260289 = DIRECTION('',(1.,0.,-0.)); +#260290 = FACE_BOUND('',#260291,.F.); +#260291 = EDGE_LOOP('',(#260292)); +#260292 = ORIENTED_EDGE('',*,*,#260293,.T.); +#260293 = EDGE_CURVE('',#260294,#260294,#260296,.T.); +#260294 = VERTEX_POINT('',#260295); +#260295 = CARTESIAN_POINT('',(174.579042,-84.8231,1.56)); +#260296 = CIRCLE('',#260297,0.387392); +#260297 = AXIS2_PLACEMENT_3D('',#260298,#260299,#260300); +#260298 = CARTESIAN_POINT('',(174.19165,-84.8231,1.56)); +#260299 = DIRECTION('',(0.,0.,1.)); +#260300 = DIRECTION('',(1.,0.,-0.)); +#260301 = FACE_BOUND('',#260302,.F.); +#260302 = EDGE_LOOP('',(#260303)); +#260303 = ORIENTED_EDGE('',*,*,#260304,.T.); +#260304 = EDGE_CURVE('',#260305,#260305,#260307,.T.); +#260305 = VERTEX_POINT('',#260306); +#260306 = CARTESIAN_POINT('',(196.929042,-84.8231,1.56)); +#260307 = CIRCLE('',#260308,0.387392); +#260308 = AXIS2_PLACEMENT_3D('',#260309,#260310,#260311); +#260309 = CARTESIAN_POINT('',(196.54165,-84.8231,1.56)); +#260310 = DIRECTION('',(0.,0.,1.)); +#260311 = DIRECTION('',(1.,0.,-0.)); +#260312 = FACE_BOUND('',#260313,.F.); +#260313 = EDGE_LOOP('',(#260314)); +#260314 = ORIENTED_EDGE('',*,*,#260315,.T.); +#260315 = EDGE_CURVE('',#260316,#260316,#260318,.T.); +#260316 = VERTEX_POINT('',#260317); +#260317 = CARTESIAN_POINT('',(174.579042,-82.8231,1.56)); +#260318 = CIRCLE('',#260319,0.387392); +#260319 = AXIS2_PLACEMENT_3D('',#260320,#260321,#260322); +#260320 = CARTESIAN_POINT('',(174.19165,-82.8231,1.56)); +#260321 = DIRECTION('',(0.,0.,1.)); +#260322 = DIRECTION('',(1.,0.,-0.)); +#260323 = FACE_BOUND('',#260324,.F.); +#260324 = EDGE_LOOP('',(#260325)); +#260325 = ORIENTED_EDGE('',*,*,#260326,.T.); +#260326 = EDGE_CURVE('',#260327,#260327,#260329,.T.); +#260327 = VERTEX_POINT('',#260328); +#260328 = CARTESIAN_POINT('',(196.929042,-82.8231,1.56)); +#260329 = CIRCLE('',#260330,0.387392); +#260330 = AXIS2_PLACEMENT_3D('',#260331,#260332,#260333); +#260331 = CARTESIAN_POINT('',(196.54165,-82.8231,1.56)); +#260332 = DIRECTION('',(0.,0.,1.)); +#260333 = DIRECTION('',(1.,0.,-0.)); +#260334 = FACE_BOUND('',#260335,.F.); +#260335 = EDGE_LOOP('',(#260336)); +#260336 = ORIENTED_EDGE('',*,*,#260337,.T.); +#260337 = EDGE_CURVE('',#260338,#260338,#260340,.T.); +#260338 = VERTEX_POINT('',#260339); +#260339 = CARTESIAN_POINT('',(106.599042,-81.3231,1.56)); +#260340 = CIRCLE('',#260341,0.487392); +#260341 = AXIS2_PLACEMENT_3D('',#260342,#260343,#260344); +#260342 = CARTESIAN_POINT('',(106.11165,-81.3231,1.56)); +#260343 = DIRECTION('',(0.,0.,1.)); +#260344 = DIRECTION('',(1.,0.,-0.)); +#260345 = FACE_BOUND('',#260346,.F.); +#260346 = EDGE_LOOP('',(#260347)); +#260347 = ORIENTED_EDGE('',*,*,#260348,.T.); +#260348 = EDGE_CURVE('',#260349,#260349,#260351,.T.); +#260349 = VERTEX_POINT('',#260350); +#260350 = CARTESIAN_POINT('',(109.139042,-81.3231,1.56)); +#260351 = CIRCLE('',#260352,0.487392); +#260352 = AXIS2_PLACEMENT_3D('',#260353,#260354,#260355); +#260353 = CARTESIAN_POINT('',(108.65165,-81.3231,1.56)); +#260354 = DIRECTION('',(0.,0.,1.)); +#260355 = DIRECTION('',(1.,0.,-0.)); +#260356 = FACE_BOUND('',#260357,.F.); +#260357 = EDGE_LOOP('',(#260358)); +#260358 = ORIENTED_EDGE('',*,*,#260359,.T.); +#260359 = EDGE_CURVE('',#260360,#260360,#260362,.T.); +#260360 = VERTEX_POINT('',#260361); +#260361 = CARTESIAN_POINT('',(111.679042,-81.3231,1.56)); +#260362 = CIRCLE('',#260363,0.487392); +#260363 = AXIS2_PLACEMENT_3D('',#260364,#260365,#260366); +#260364 = CARTESIAN_POINT('',(111.19165,-81.3231,1.56)); +#260365 = DIRECTION('',(0.,0.,1.)); +#260366 = DIRECTION('',(1.,0.,-0.)); +#260367 = FACE_BOUND('',#260368,.F.); +#260368 = EDGE_LOOP('',(#260369)); +#260369 = ORIENTED_EDGE('',*,*,#260370,.T.); +#260370 = EDGE_CURVE('',#260371,#260371,#260373,.T.); +#260371 = VERTEX_POINT('',#260372); +#260372 = CARTESIAN_POINT('',(114.219042,-81.3231,1.56)); +#260373 = CIRCLE('',#260374,0.487392); +#260374 = AXIS2_PLACEMENT_3D('',#260375,#260376,#260377); +#260375 = CARTESIAN_POINT('',(113.73165,-81.3231,1.56)); +#260376 = DIRECTION('',(0.,0.,1.)); +#260377 = DIRECTION('',(1.,0.,-0.)); +#260378 = FACE_BOUND('',#260379,.F.); +#260379 = EDGE_LOOP('',(#260380)); +#260380 = ORIENTED_EDGE('',*,*,#260381,.T.); +#260381 = EDGE_CURVE('',#260382,#260382,#260384,.T.); +#260382 = VERTEX_POINT('',#260383); +#260383 = CARTESIAN_POINT('',(116.759042,-81.3231,1.56)); +#260384 = CIRCLE('',#260385,0.487392); +#260385 = AXIS2_PLACEMENT_3D('',#260386,#260387,#260388); +#260386 = CARTESIAN_POINT('',(116.27165,-81.3231,1.56)); +#260387 = DIRECTION('',(0.,0.,1.)); +#260388 = DIRECTION('',(1.,0.,-0.)); +#260389 = FACE_BOUND('',#260390,.F.); +#260390 = EDGE_LOOP('',(#260391)); +#260391 = ORIENTED_EDGE('',*,*,#260392,.T.); +#260392 = EDGE_CURVE('',#260393,#260393,#260395,.T.); +#260393 = VERTEX_POINT('',#260394); +#260394 = CARTESIAN_POINT('',(119.299042,-81.3231,1.56)); +#260395 = CIRCLE('',#260396,0.487392); +#260396 = AXIS2_PLACEMENT_3D('',#260397,#260398,#260399); +#260397 = CARTESIAN_POINT('',(118.81165,-81.3231,1.56)); +#260398 = DIRECTION('',(0.,0.,1.)); +#260399 = DIRECTION('',(1.,0.,-0.)); +#260400 = FACE_BOUND('',#260401,.F.); +#260401 = EDGE_LOOP('',(#260402)); +#260402 = ORIENTED_EDGE('',*,*,#260403,.T.); +#260403 = EDGE_CURVE('',#260404,#260404,#260406,.T.); +#260404 = VERTEX_POINT('',#260405); +#260405 = CARTESIAN_POINT('',(121.839042,-81.3231,1.56)); +#260406 = CIRCLE('',#260407,0.487392); +#260407 = AXIS2_PLACEMENT_3D('',#260408,#260409,#260410); +#260408 = CARTESIAN_POINT('',(121.35165,-81.3231,1.56)); +#260409 = DIRECTION('',(0.,0.,1.)); +#260410 = DIRECTION('',(1.,0.,-0.)); +#260411 = FACE_BOUND('',#260412,.F.); +#260412 = EDGE_LOOP('',(#260413)); +#260413 = ORIENTED_EDGE('',*,*,#260414,.T.); +#260414 = EDGE_CURVE('',#260415,#260415,#260417,.T.); +#260415 = VERTEX_POINT('',#260416); +#260416 = CARTESIAN_POINT('',(124.379042,-81.3231,1.56)); +#260417 = CIRCLE('',#260418,0.487392); +#260418 = AXIS2_PLACEMENT_3D('',#260419,#260420,#260421); +#260419 = CARTESIAN_POINT('',(123.89165,-81.3231,1.56)); +#260420 = DIRECTION('',(0.,0.,1.)); +#260421 = DIRECTION('',(1.,0.,-0.)); +#260422 = FACE_BOUND('',#260423,.F.); +#260423 = EDGE_LOOP('',(#260424)); +#260424 = ORIENTED_EDGE('',*,*,#260425,.T.); +#260425 = EDGE_CURVE('',#260426,#260426,#260428,.T.); +#260426 = VERTEX_POINT('',#260427); +#260427 = CARTESIAN_POINT('',(126.919042,-81.3231,1.56)); +#260428 = CIRCLE('',#260429,0.487392); +#260429 = AXIS2_PLACEMENT_3D('',#260430,#260431,#260432); +#260430 = CARTESIAN_POINT('',(126.43165,-81.3231,1.56)); +#260431 = DIRECTION('',(0.,0.,1.)); +#260432 = DIRECTION('',(1.,0.,-0.)); +#260433 = FACE_BOUND('',#260434,.F.); +#260434 = EDGE_LOOP('',(#260435)); +#260435 = ORIENTED_EDGE('',*,*,#260436,.T.); +#260436 = EDGE_CURVE('',#260437,#260437,#260439,.T.); +#260437 = VERTEX_POINT('',#260438); +#260438 = CARTESIAN_POINT('',(129.459042,-81.3231,1.56)); +#260439 = CIRCLE('',#260440,0.487392); +#260440 = AXIS2_PLACEMENT_3D('',#260441,#260442,#260443); +#260441 = CARTESIAN_POINT('',(128.97165,-81.3231,1.56)); +#260442 = DIRECTION('',(0.,0.,1.)); +#260443 = DIRECTION('',(1.,0.,-0.)); +#260444 = FACE_BOUND('',#260445,.F.); +#260445 = EDGE_LOOP('',(#260446)); +#260446 = ORIENTED_EDGE('',*,*,#260447,.T.); +#260447 = EDGE_CURVE('',#260448,#260448,#260450,.T.); +#260448 = VERTEX_POINT('',#260449); +#260449 = CARTESIAN_POINT('',(133.519042,-81.3231,1.56)); +#260450 = CIRCLE('',#260451,0.487392); +#260451 = AXIS2_PLACEMENT_3D('',#260452,#260453,#260454); +#260452 = CARTESIAN_POINT('',(133.03165,-81.3231,1.56)); +#260453 = DIRECTION('',(0.,0.,1.)); +#260454 = DIRECTION('',(1.,0.,-0.)); +#260455 = FACE_BOUND('',#260456,.F.); +#260456 = EDGE_LOOP('',(#260457)); +#260457 = ORIENTED_EDGE('',*,*,#260458,.T.); +#260458 = EDGE_CURVE('',#260459,#260459,#260461,.T.); +#260459 = VERTEX_POINT('',#260460); +#260460 = CARTESIAN_POINT('',(136.059042,-81.3231,1.56)); +#260461 = CIRCLE('',#260462,0.487392); +#260462 = AXIS2_PLACEMENT_3D('',#260463,#260464,#260465); +#260463 = CARTESIAN_POINT('',(135.57165,-81.3231,1.56)); +#260464 = DIRECTION('',(0.,0.,1.)); +#260465 = DIRECTION('',(1.,0.,-0.)); +#260466 = FACE_BOUND('',#260467,.F.); +#260467 = EDGE_LOOP('',(#260468)); +#260468 = ORIENTED_EDGE('',*,*,#260469,.T.); +#260469 = EDGE_CURVE('',#260470,#260470,#260472,.T.); +#260470 = VERTEX_POINT('',#260471); +#260471 = CARTESIAN_POINT('',(138.599042,-81.3231,1.56)); +#260472 = CIRCLE('',#260473,0.487392); +#260473 = AXIS2_PLACEMENT_3D('',#260474,#260475,#260476); +#260474 = CARTESIAN_POINT('',(138.11165,-81.3231,1.56)); +#260475 = DIRECTION('',(0.,0.,1.)); +#260476 = DIRECTION('',(1.,0.,-0.)); +#260477 = FACE_BOUND('',#260478,.F.); +#260478 = EDGE_LOOP('',(#260479)); +#260479 = ORIENTED_EDGE('',*,*,#260480,.T.); +#260480 = EDGE_CURVE('',#260481,#260481,#260483,.T.); +#260481 = VERTEX_POINT('',#260482); +#260482 = CARTESIAN_POINT('',(141.139042,-81.3231,1.56)); +#260483 = CIRCLE('',#260484,0.487392); +#260484 = AXIS2_PLACEMENT_3D('',#260485,#260486,#260487); +#260485 = CARTESIAN_POINT('',(140.65165,-81.3231,1.56)); +#260486 = DIRECTION('',(0.,0.,1.)); +#260487 = DIRECTION('',(1.,0.,-0.)); +#260488 = FACE_BOUND('',#260489,.F.); +#260489 = EDGE_LOOP('',(#260490)); +#260490 = ORIENTED_EDGE('',*,*,#260491,.T.); +#260491 = EDGE_CURVE('',#260492,#260492,#260494,.T.); +#260492 = VERTEX_POINT('',#260493); +#260493 = CARTESIAN_POINT('',(143.679042,-81.3231,1.56)); +#260494 = CIRCLE('',#260495,0.487392); +#260495 = AXIS2_PLACEMENT_3D('',#260496,#260497,#260498); +#260496 = CARTESIAN_POINT('',(143.19165,-81.3231,1.56)); +#260497 = DIRECTION('',(0.,0.,1.)); +#260498 = DIRECTION('',(1.,0.,-0.)); +#260499 = FACE_BOUND('',#260500,.F.); +#260500 = EDGE_LOOP('',(#260501)); +#260501 = ORIENTED_EDGE('',*,*,#260502,.T.); +#260502 = EDGE_CURVE('',#260503,#260503,#260505,.T.); +#260503 = VERTEX_POINT('',#260504); +#260504 = CARTESIAN_POINT('',(146.219042,-81.3231,1.56)); +#260505 = CIRCLE('',#260506,0.487392); +#260506 = AXIS2_PLACEMENT_3D('',#260507,#260508,#260509); +#260507 = CARTESIAN_POINT('',(145.73165,-81.3231,1.56)); +#260508 = DIRECTION('',(0.,0.,1.)); +#260509 = DIRECTION('',(1.,0.,-0.)); +#260510 = FACE_BOUND('',#260511,.F.); +#260511 = EDGE_LOOP('',(#260512)); +#260512 = ORIENTED_EDGE('',*,*,#260513,.T.); +#260513 = EDGE_CURVE('',#260514,#260514,#260516,.T.); +#260514 = VERTEX_POINT('',#260515); +#260515 = CARTESIAN_POINT('',(148.759042,-81.3231,1.56)); +#260516 = CIRCLE('',#260517,0.487392); +#260517 = AXIS2_PLACEMENT_3D('',#260518,#260519,#260520); +#260518 = CARTESIAN_POINT('',(148.27165,-81.3231,1.56)); +#260519 = DIRECTION('',(0.,0.,1.)); +#260520 = DIRECTION('',(1.,0.,-0.)); +#260521 = FACE_BOUND('',#260522,.F.); +#260522 = EDGE_LOOP('',(#260523)); +#260523 = ORIENTED_EDGE('',*,*,#260524,.T.); +#260524 = EDGE_CURVE('',#260525,#260525,#260527,.T.); +#260525 = VERTEX_POINT('',#260526); +#260526 = CARTESIAN_POINT('',(151.299042,-81.3231,1.56)); +#260527 = CIRCLE('',#260528,0.487392); +#260528 = AXIS2_PLACEMENT_3D('',#260529,#260530,#260531); +#260529 = CARTESIAN_POINT('',(150.81165,-81.3231,1.56)); +#260530 = DIRECTION('',(0.,0.,1.)); +#260531 = DIRECTION('',(1.,0.,-0.)); +#260532 = FACE_BOUND('',#260533,.F.); +#260533 = EDGE_LOOP('',(#260534)); +#260534 = ORIENTED_EDGE('',*,*,#260535,.T.); +#260535 = EDGE_CURVE('',#260536,#260536,#260538,.T.); +#260536 = VERTEX_POINT('',#260537); +#260537 = CARTESIAN_POINT('',(174.579042,-80.8231,1.56)); +#260538 = CIRCLE('',#260539,0.387392); +#260539 = AXIS2_PLACEMENT_3D('',#260540,#260541,#260542); +#260540 = CARTESIAN_POINT('',(174.19165,-80.8231,1.56)); +#260541 = DIRECTION('',(0.,0.,1.)); +#260542 = DIRECTION('',(1.,0.,-0.)); +#260543 = FACE_BOUND('',#260544,.F.); +#260544 = EDGE_LOOP('',(#260545)); +#260545 = ORIENTED_EDGE('',*,*,#260546,.T.); +#260546 = EDGE_CURVE('',#260547,#260547,#260549,.T.); +#260547 = VERTEX_POINT('',#260548); +#260548 = CARTESIAN_POINT('',(196.929042,-80.8231,1.56)); +#260549 = CIRCLE('',#260550,0.387392); +#260550 = AXIS2_PLACEMENT_3D('',#260551,#260552,#260553); +#260551 = CARTESIAN_POINT('',(196.54165,-80.8231,1.56)); +#260552 = DIRECTION('',(0.,0.,1.)); +#260553 = DIRECTION('',(1.,0.,-0.)); +#260554 = FACE_BOUND('',#260555,.F.); +#260555 = EDGE_LOOP('',(#260556,#260566,#260574,#260582)); +#260556 = ORIENTED_EDGE('',*,*,#260557,.T.); +#260557 = EDGE_CURVE('',#260558,#260560,#260562,.T.); +#260558 = VERTEX_POINT('',#260559); +#260559 = CARTESIAN_POINT('',(165.69165,-81.0731,1.56)); +#260560 = VERTEX_POINT('',#260561); +#260561 = CARTESIAN_POINT('',(165.69165,-79.5731,1.56)); +#260562 = LINE('',#260563,#260564); +#260563 = CARTESIAN_POINT('',(165.69165,-81.0731,1.56)); +#260564 = VECTOR('',#260565,1.); +#260565 = DIRECTION('',(0.,1.,0.)); +#260566 = ORIENTED_EDGE('',*,*,#260567,.T.); +#260567 = EDGE_CURVE('',#260560,#260568,#260570,.T.); +#260568 = VERTEX_POINT('',#260569); +#260569 = CARTESIAN_POINT('',(165.39165,-79.5731,1.56)); +#260570 = LINE('',#260571,#260572); +#260571 = CARTESIAN_POINT('',(165.69165,-79.5731,1.56)); +#260572 = VECTOR('',#260573,1.); +#260573 = DIRECTION('',(-1.,0.,0.)); +#260574 = ORIENTED_EDGE('',*,*,#260575,.T.); +#260575 = EDGE_CURVE('',#260568,#260576,#260578,.T.); +#260576 = VERTEX_POINT('',#260577); +#260577 = CARTESIAN_POINT('',(165.39165,-81.0731,1.56)); +#260578 = LINE('',#260579,#260580); +#260579 = CARTESIAN_POINT('',(165.39165,-79.5731,1.56)); +#260580 = VECTOR('',#260581,1.); +#260581 = DIRECTION('',(0.,-1.,0.)); +#260582 = ORIENTED_EDGE('',*,*,#260583,.T.); +#260583 = EDGE_CURVE('',#260576,#260558,#260584,.T.); +#260584 = LINE('',#260585,#260586); +#260585 = CARTESIAN_POINT('',(165.39165,-81.0731,1.56)); +#260586 = VECTOR('',#260587,1.); +#260587 = DIRECTION('',(1.,0.,0.)); +#260588 = FACE_BOUND('',#260589,.F.); +#260589 = EDGE_LOOP('',(#260590)); +#260590 = ORIENTED_EDGE('',*,*,#260591,.T.); +#260591 = EDGE_CURVE('',#260592,#260592,#260594,.T.); +#260592 = VERTEX_POINT('',#260593); +#260593 = CARTESIAN_POINT('',(210.654042,-80.0731,1.56)); +#260594 = CIRCLE('',#260595,0.487392); +#260595 = AXIS2_PLACEMENT_3D('',#260596,#260597,#260598); +#260596 = CARTESIAN_POINT('',(210.16665,-80.0731,1.56)); +#260597 = DIRECTION('',(0.,0.,1.)); +#260598 = DIRECTION('',(1.,0.,-0.)); +#260599 = FACE_BOUND('',#260600,.F.); +#260600 = EDGE_LOOP('',(#260601)); +#260601 = ORIENTED_EDGE('',*,*,#260602,.T.); +#260602 = EDGE_CURVE('',#260603,#260603,#260605,.T.); +#260603 = VERTEX_POINT('',#260604); +#260604 = CARTESIAN_POINT('',(174.579042,-78.8231,1.56)); +#260605 = CIRCLE('',#260606,0.387392); +#260606 = AXIS2_PLACEMENT_3D('',#260607,#260608,#260609); +#260607 = CARTESIAN_POINT('',(174.19165,-78.8231,1.56)); +#260608 = DIRECTION('',(0.,0.,1.)); +#260609 = DIRECTION('',(1.,0.,-0.)); +#260610 = FACE_BOUND('',#260611,.F.); +#260611 = EDGE_LOOP('',(#260612)); +#260612 = ORIENTED_EDGE('',*,*,#260613,.T.); +#260613 = EDGE_CURVE('',#260614,#260614,#260616,.T.); +#260614 = VERTEX_POINT('',#260615); +#260615 = CARTESIAN_POINT('',(196.929042,-78.8231,1.56)); +#260616 = CIRCLE('',#260617,0.387392); +#260617 = AXIS2_PLACEMENT_3D('',#260618,#260619,#260620); +#260618 = CARTESIAN_POINT('',(196.54165,-78.8231,1.56)); +#260619 = DIRECTION('',(0.,0.,1.)); +#260620 = DIRECTION('',(1.,0.,-0.)); +#260621 = FACE_BOUND('',#260622,.F.); +#260622 = EDGE_LOOP('',(#260623)); +#260623 = ORIENTED_EDGE('',*,*,#260624,.T.); +#260624 = EDGE_CURVE('',#260625,#260625,#260627,.T.); +#260625 = VERTEX_POINT('',#260626); +#260626 = CARTESIAN_POINT('',(210.654042,-77.5731,1.56)); +#260627 = CIRCLE('',#260628,0.487392); +#260628 = AXIS2_PLACEMENT_3D('',#260629,#260630,#260631); +#260629 = CARTESIAN_POINT('',(210.16665,-77.5731,1.56)); +#260630 = DIRECTION('',(0.,0.,1.)); +#260631 = DIRECTION('',(1.,0.,-0.)); +#260632 = FACE_BOUND('',#260633,.F.); +#260633 = EDGE_LOOP('',(#260634)); +#260634 = ORIENTED_EDGE('',*,*,#260635,.T.); +#260635 = EDGE_CURVE('',#260636,#260636,#260638,.T.); +#260636 = VERTEX_POINT('',#260637); +#260637 = CARTESIAN_POINT('',(174.579042,-76.8231,1.56)); +#260638 = CIRCLE('',#260639,0.387392); +#260639 = AXIS2_PLACEMENT_3D('',#260640,#260641,#260642); +#260640 = CARTESIAN_POINT('',(174.19165,-76.8231,1.56)); +#260641 = DIRECTION('',(0.,0.,1.)); +#260642 = DIRECTION('',(1.,0.,-0.)); +#260643 = FACE_BOUND('',#260644,.F.); +#260644 = EDGE_LOOP('',(#260645)); +#260645 = ORIENTED_EDGE('',*,*,#260646,.T.); +#260646 = EDGE_CURVE('',#260647,#260647,#260649,.T.); +#260647 = VERTEX_POINT('',#260648); +#260648 = CARTESIAN_POINT('',(196.929042,-76.8231,1.56)); +#260649 = CIRCLE('',#260650,0.387392); +#260650 = AXIS2_PLACEMENT_3D('',#260651,#260652,#260653); +#260651 = CARTESIAN_POINT('',(196.54165,-76.8231,1.56)); +#260652 = DIRECTION('',(0.,0.,1.)); +#260653 = DIRECTION('',(1.,0.,-0.)); +#260654 = FACE_BOUND('',#260655,.F.); +#260655 = EDGE_LOOP('',(#260656)); +#260656 = ORIENTED_EDGE('',*,*,#260657,.T.); +#260657 = EDGE_CURVE('',#260658,#260658,#260660,.T.); +#260658 = VERTEX_POINT('',#260659); +#260659 = CARTESIAN_POINT('',(174.579042,-74.8231,1.56)); +#260660 = CIRCLE('',#260661,0.387392); +#260661 = AXIS2_PLACEMENT_3D('',#260662,#260663,#260664); +#260662 = CARTESIAN_POINT('',(174.19165,-74.8231,1.56)); +#260663 = DIRECTION('',(0.,0.,1.)); +#260664 = DIRECTION('',(1.,0.,-0.)); +#260665 = FACE_BOUND('',#260666,.F.); +#260666 = EDGE_LOOP('',(#260667)); +#260667 = ORIENTED_EDGE('',*,*,#260668,.T.); +#260668 = EDGE_CURVE('',#260669,#260669,#260671,.T.); +#260669 = VERTEX_POINT('',#260670); +#260670 = CARTESIAN_POINT('',(196.929042,-74.8231,1.56)); +#260671 = CIRCLE('',#260672,0.387392); +#260672 = AXIS2_PLACEMENT_3D('',#260673,#260674,#260675); +#260673 = CARTESIAN_POINT('',(196.54165,-74.8231,1.56)); +#260674 = DIRECTION('',(0.,0.,1.)); +#260675 = DIRECTION('',(1.,0.,-0.)); +#260676 = FACE_BOUND('',#260677,.F.); +#260677 = EDGE_LOOP('',(#260678)); +#260678 = ORIENTED_EDGE('',*,*,#260679,.T.); +#260679 = EDGE_CURVE('',#260680,#260680,#260682,.T.); +#260680 = VERTEX_POINT('',#260681); +#260681 = CARTESIAN_POINT('',(107.679042,-74.1031,1.56)); +#260682 = CIRCLE('',#260683,0.487392); +#260683 = AXIS2_PLACEMENT_3D('',#260684,#260685,#260686); +#260684 = CARTESIAN_POINT('',(107.19165,-74.1031,1.56)); +#260685 = DIRECTION('',(0.,0.,1.)); +#260686 = DIRECTION('',(1.,0.,-0.)); +#260687 = FACE_BOUND('',#260688,.F.); +#260688 = EDGE_LOOP('',(#260689)); +#260689 = ORIENTED_EDGE('',*,*,#260690,.T.); +#260690 = EDGE_CURVE('',#260691,#260691,#260693,.T.); +#260691 = VERTEX_POINT('',#260692); +#260692 = CARTESIAN_POINT('',(110.219042,-74.1031,1.56)); +#260693 = CIRCLE('',#260694,0.487392); +#260694 = AXIS2_PLACEMENT_3D('',#260695,#260696,#260697); +#260695 = CARTESIAN_POINT('',(109.73165,-74.1031,1.56)); +#260696 = DIRECTION('',(0.,0.,1.)); +#260697 = DIRECTION('',(1.,0.,-0.)); +#260698 = FACE_BOUND('',#260699,.F.); +#260699 = EDGE_LOOP('',(#260700)); +#260700 = ORIENTED_EDGE('',*,*,#260701,.T.); +#260701 = EDGE_CURVE('',#260702,#260702,#260704,.T.); +#260702 = VERTEX_POINT('',#260703); +#260703 = CARTESIAN_POINT('',(112.759042,-74.1031,1.56)); +#260704 = CIRCLE('',#260705,0.487392); +#260705 = AXIS2_PLACEMENT_3D('',#260706,#260707,#260708); +#260706 = CARTESIAN_POINT('',(112.27165,-74.1031,1.56)); +#260707 = DIRECTION('',(0.,0.,1.)); +#260708 = DIRECTION('',(1.,0.,-0.)); +#260709 = FACE_BOUND('',#260710,.F.); +#260710 = EDGE_LOOP('',(#260711)); +#260711 = ORIENTED_EDGE('',*,*,#260712,.T.); +#260712 = EDGE_CURVE('',#260713,#260713,#260715,.T.); +#260713 = VERTEX_POINT('',#260714); +#260714 = CARTESIAN_POINT('',(115.299042,-74.1031,1.56)); +#260715 = CIRCLE('',#260716,0.487392); +#260716 = AXIS2_PLACEMENT_3D('',#260717,#260718,#260719); +#260717 = CARTESIAN_POINT('',(114.81165,-74.1031,1.56)); +#260718 = DIRECTION('',(0.,0.,1.)); +#260719 = DIRECTION('',(1.,0.,-0.)); +#260720 = FACE_BOUND('',#260721,.F.); +#260721 = EDGE_LOOP('',(#260722)); +#260722 = ORIENTED_EDGE('',*,*,#260723,.T.); +#260723 = EDGE_CURVE('',#260724,#260724,#260726,.T.); +#260724 = VERTEX_POINT('',#260725); +#260725 = CARTESIAN_POINT('',(117.839042,-74.1031,1.56)); +#260726 = CIRCLE('',#260727,0.487392); +#260727 = AXIS2_PLACEMENT_3D('',#260728,#260729,#260730); +#260728 = CARTESIAN_POINT('',(117.35165,-74.1031,1.56)); +#260729 = DIRECTION('',(0.,0.,1.)); +#260730 = DIRECTION('',(1.,0.,-0.)); +#260731 = FACE_BOUND('',#260732,.F.); +#260732 = EDGE_LOOP('',(#260733)); +#260733 = ORIENTED_EDGE('',*,*,#260734,.T.); +#260734 = EDGE_CURVE('',#260735,#260735,#260737,.T.); +#260735 = VERTEX_POINT('',#260736); +#260736 = CARTESIAN_POINT('',(120.379042,-74.1031,1.56)); +#260737 = CIRCLE('',#260738,0.487392); +#260738 = AXIS2_PLACEMENT_3D('',#260739,#260740,#260741); +#260739 = CARTESIAN_POINT('',(119.89165,-74.1031,1.56)); +#260740 = DIRECTION('',(0.,0.,1.)); +#260741 = DIRECTION('',(1.,0.,-0.)); +#260742 = FACE_BOUND('',#260743,.F.); +#260743 = EDGE_LOOP('',(#260744)); +#260744 = ORIENTED_EDGE('',*,*,#260745,.T.); +#260745 = EDGE_CURVE('',#260746,#260746,#260748,.T.); +#260746 = VERTEX_POINT('',#260747); +#260747 = CARTESIAN_POINT('',(122.919042,-74.1031,1.56)); +#260748 = CIRCLE('',#260749,0.487392); +#260749 = AXIS2_PLACEMENT_3D('',#260750,#260751,#260752); +#260750 = CARTESIAN_POINT('',(122.43165,-74.1031,1.56)); +#260751 = DIRECTION('',(0.,0.,1.)); +#260752 = DIRECTION('',(1.,0.,-0.)); +#260753 = FACE_BOUND('',#260754,.F.); +#260754 = EDGE_LOOP('',(#260755)); +#260755 = ORIENTED_EDGE('',*,*,#260756,.T.); +#260756 = EDGE_CURVE('',#260757,#260757,#260759,.T.); +#260757 = VERTEX_POINT('',#260758); +#260758 = CARTESIAN_POINT('',(125.459042,-74.1031,1.56)); +#260759 = CIRCLE('',#260760,0.487392); +#260760 = AXIS2_PLACEMENT_3D('',#260761,#260762,#260763); +#260761 = CARTESIAN_POINT('',(124.97165,-74.1031,1.56)); +#260762 = DIRECTION('',(0.,0.,1.)); +#260763 = DIRECTION('',(1.,0.,-0.)); +#260764 = FACE_BOUND('',#260765,.F.); +#260765 = EDGE_LOOP('',(#260766)); +#260766 = ORIENTED_EDGE('',*,*,#260767,.T.); +#260767 = EDGE_CURVE('',#260768,#260768,#260770,.T.); +#260768 = VERTEX_POINT('',#260769); +#260769 = CARTESIAN_POINT('',(127.999042,-74.1031,1.56)); +#260770 = CIRCLE('',#260771,0.487392); +#260771 = AXIS2_PLACEMENT_3D('',#260772,#260773,#260774); +#260772 = CARTESIAN_POINT('',(127.51165,-74.1031,1.56)); +#260773 = DIRECTION('',(0.,0.,1.)); +#260774 = DIRECTION('',(1.,0.,-0.)); +#260775 = FACE_BOUND('',#260776,.F.); +#260776 = EDGE_LOOP('',(#260777)); +#260777 = ORIENTED_EDGE('',*,*,#260778,.T.); +#260778 = EDGE_CURVE('',#260779,#260779,#260781,.T.); +#260779 = VERTEX_POINT('',#260780); +#260780 = CARTESIAN_POINT('',(130.539042,-74.1031,1.56)); +#260781 = CIRCLE('',#260782,0.487392); +#260782 = AXIS2_PLACEMENT_3D('',#260783,#260784,#260785); +#260783 = CARTESIAN_POINT('',(130.05165,-74.1031,1.56)); +#260784 = DIRECTION('',(0.,0.,1.)); +#260785 = DIRECTION('',(1.,0.,-0.)); +#260786 = FACE_BOUND('',#260787,.F.); +#260787 = EDGE_LOOP('',(#260788)); +#260788 = ORIENTED_EDGE('',*,*,#260789,.T.); +#260789 = EDGE_CURVE('',#260790,#260790,#260792,.T.); +#260790 = VERTEX_POINT('',#260791); +#260791 = CARTESIAN_POINT('',(133.079042,-74.1031,1.56)); +#260792 = CIRCLE('',#260793,0.487392); +#260793 = AXIS2_PLACEMENT_3D('',#260794,#260795,#260796); +#260794 = CARTESIAN_POINT('',(132.59165,-74.1031,1.56)); +#260795 = DIRECTION('',(0.,0.,1.)); +#260796 = DIRECTION('',(1.,0.,-0.)); +#260797 = FACE_BOUND('',#260798,.F.); +#260798 = EDGE_LOOP('',(#260799)); +#260799 = ORIENTED_EDGE('',*,*,#260800,.T.); +#260800 = EDGE_CURVE('',#260801,#260801,#260803,.T.); +#260801 = VERTEX_POINT('',#260802); +#260802 = CARTESIAN_POINT('',(135.619042,-74.1031,1.56)); +#260803 = CIRCLE('',#260804,0.487392); +#260804 = AXIS2_PLACEMENT_3D('',#260805,#260806,#260807); +#260805 = CARTESIAN_POINT('',(135.13165,-74.1031,1.56)); +#260806 = DIRECTION('',(0.,0.,1.)); +#260807 = DIRECTION('',(1.,0.,-0.)); +#260808 = FACE_BOUND('',#260809,.F.); +#260809 = EDGE_LOOP('',(#260810)); +#260810 = ORIENTED_EDGE('',*,*,#260811,.T.); +#260811 = EDGE_CURVE('',#260812,#260812,#260814,.T.); +#260812 = VERTEX_POINT('',#260813); +#260813 = CARTESIAN_POINT('',(138.159042,-74.1031,1.56)); +#260814 = CIRCLE('',#260815,0.487392); +#260815 = AXIS2_PLACEMENT_3D('',#260816,#260817,#260818); +#260816 = CARTESIAN_POINT('',(137.67165,-74.1031,1.56)); +#260817 = DIRECTION('',(0.,0.,1.)); +#260818 = DIRECTION('',(1.,0.,-0.)); +#260819 = FACE_BOUND('',#260820,.F.); +#260820 = EDGE_LOOP('',(#260821)); +#260821 = ORIENTED_EDGE('',*,*,#260822,.T.); +#260822 = EDGE_CURVE('',#260823,#260823,#260825,.T.); +#260823 = VERTEX_POINT('',#260824); +#260824 = CARTESIAN_POINT('',(140.699042,-74.1031,1.56)); +#260825 = CIRCLE('',#260826,0.487392); +#260826 = AXIS2_PLACEMENT_3D('',#260827,#260828,#260829); +#260827 = CARTESIAN_POINT('',(140.21165,-74.1031,1.56)); +#260828 = DIRECTION('',(0.,0.,1.)); +#260829 = DIRECTION('',(1.,0.,-0.)); +#260830 = FACE_BOUND('',#260831,.F.); +#260831 = EDGE_LOOP('',(#260832)); +#260832 = ORIENTED_EDGE('',*,*,#260833,.T.); +#260833 = EDGE_CURVE('',#260834,#260834,#260836,.T.); +#260834 = VERTEX_POINT('',#260835); +#260835 = CARTESIAN_POINT('',(143.239042,-74.1031,1.56)); +#260836 = CIRCLE('',#260837,0.487392); +#260837 = AXIS2_PLACEMENT_3D('',#260838,#260839,#260840); +#260838 = CARTESIAN_POINT('',(142.75165,-74.1031,1.56)); +#260839 = DIRECTION('',(0.,0.,1.)); +#260840 = DIRECTION('',(1.,0.,-0.)); +#260841 = FACE_BOUND('',#260842,.F.); +#260842 = EDGE_LOOP('',(#260843)); +#260843 = ORIENTED_EDGE('',*,*,#260844,.T.); +#260844 = EDGE_CURVE('',#260845,#260845,#260847,.T.); +#260845 = VERTEX_POINT('',#260846); +#260846 = CARTESIAN_POINT('',(145.779042,-74.1031,1.56)); +#260847 = CIRCLE('',#260848,0.487392); +#260848 = AXIS2_PLACEMENT_3D('',#260849,#260850,#260851); +#260849 = CARTESIAN_POINT('',(145.29165,-74.1031,1.56)); +#260850 = DIRECTION('',(0.,0.,1.)); +#260851 = DIRECTION('',(1.,0.,-0.)); +#260852 = FACE_BOUND('',#260853,.F.); +#260853 = EDGE_LOOP('',(#260854)); +#260854 = ORIENTED_EDGE('',*,*,#260855,.T.); +#260855 = EDGE_CURVE('',#260856,#260856,#260858,.T.); +#260856 = VERTEX_POINT('',#260857); +#260857 = CARTESIAN_POINT('',(148.319042,-74.1031,1.56)); +#260858 = CIRCLE('',#260859,0.487392); +#260859 = AXIS2_PLACEMENT_3D('',#260860,#260861,#260862); +#260860 = CARTESIAN_POINT('',(147.83165,-74.1031,1.56)); +#260861 = DIRECTION('',(0.,0.,1.)); +#260862 = DIRECTION('',(1.,0.,-0.)); +#260863 = FACE_BOUND('',#260864,.F.); +#260864 = EDGE_LOOP('',(#260865)); +#260865 = ORIENTED_EDGE('',*,*,#260866,.T.); +#260866 = EDGE_CURVE('',#260867,#260867,#260869,.T.); +#260867 = VERTEX_POINT('',#260868); +#260868 = CARTESIAN_POINT('',(150.859042,-74.1031,1.56)); +#260869 = CIRCLE('',#260870,0.487392); +#260870 = AXIS2_PLACEMENT_3D('',#260871,#260872,#260873); +#260871 = CARTESIAN_POINT('',(150.37165,-74.1031,1.56)); +#260872 = DIRECTION('',(0.,0.,1.)); +#260873 = DIRECTION('',(1.,0.,-0.)); +#260874 = FACE_BOUND('',#260875,.F.); +#260875 = EDGE_LOOP('',(#260876)); +#260876 = ORIENTED_EDGE('',*,*,#260877,.T.); +#260877 = EDGE_CURVE('',#260878,#260878,#260880,.T.); +#260878 = VERTEX_POINT('',#260879); +#260879 = CARTESIAN_POINT('',(153.399042,-74.1031,1.56)); +#260880 = CIRCLE('',#260881,0.487392); +#260881 = AXIS2_PLACEMENT_3D('',#260882,#260883,#260884); +#260882 = CARTESIAN_POINT('',(152.91165,-74.1031,1.56)); +#260883 = DIRECTION('',(0.,0.,1.)); +#260884 = DIRECTION('',(1.,0.,-0.)); +#260885 = FACE_BOUND('',#260886,.F.); +#260886 = EDGE_LOOP('',(#260887)); +#260887 = ORIENTED_EDGE('',*,*,#260888,.T.); +#260888 = EDGE_CURVE('',#260889,#260889,#260891,.T.); +#260889 = VERTEX_POINT('',#260890); +#260890 = CARTESIAN_POINT('',(155.939042,-74.1031,1.56)); +#260891 = CIRCLE('',#260892,0.487392); +#260892 = AXIS2_PLACEMENT_3D('',#260893,#260894,#260895); +#260893 = CARTESIAN_POINT('',(155.45165,-74.1031,1.56)); +#260894 = DIRECTION('',(0.,0.,1.)); +#260895 = DIRECTION('',(1.,0.,-0.)); +#260896 = FACE_BOUND('',#260897,.F.); +#260897 = EDGE_LOOP('',(#260898)); +#260898 = ORIENTED_EDGE('',*,*,#260899,.T.); +#260899 = EDGE_CURVE('',#260900,#260900,#260902,.T.); +#260900 = VERTEX_POINT('',#260901); +#260901 = CARTESIAN_POINT('',(210.654042,-70.8231,1.56)); +#260902 = CIRCLE('',#260903,0.487392); +#260903 = AXIS2_PLACEMENT_3D('',#260904,#260905,#260906); +#260904 = CARTESIAN_POINT('',(210.16665,-70.8231,1.56)); +#260905 = DIRECTION('',(0.,0.,1.)); +#260906 = DIRECTION('',(1.,0.,-0.)); +#260907 = FACE_BOUND('',#260908,.F.); +#260908 = EDGE_LOOP('',(#260909)); +#260909 = ORIENTED_EDGE('',*,*,#260910,.T.); +#260910 = EDGE_CURVE('',#260911,#260911,#260913,.T.); +#260911 = VERTEX_POINT('',#260912); +#260912 = CARTESIAN_POINT('',(210.654042,-68.3231,1.56)); +#260913 = CIRCLE('',#260914,0.487392); +#260914 = AXIS2_PLACEMENT_3D('',#260915,#260916,#260917); +#260915 = CARTESIAN_POINT('',(210.16665,-68.3231,1.56)); +#260916 = DIRECTION('',(0.,0.,1.)); +#260917 = DIRECTION('',(1.,0.,-0.)); +#260918 = FACE_BOUND('',#260919,.F.); +#260919 = EDGE_LOOP('',(#260920)); +#260920 = ORIENTED_EDGE('',*,*,#260921,.T.); +#260921 = EDGE_CURVE('',#260922,#260922,#260924,.T.); +#260922 = VERTEX_POINT('',#260923); +#260923 = CARTESIAN_POINT('',(189.771542,-66.0256,1.56)); +#260924 = CIRCLE('',#260925,0.487392); +#260925 = AXIS2_PLACEMENT_3D('',#260926,#260927,#260928); +#260926 = CARTESIAN_POINT('',(189.28415,-66.0256,1.56)); +#260927 = DIRECTION('',(0.,0.,1.)); +#260928 = DIRECTION('',(1.,0.,-0.)); +#260929 = FACE_BOUND('',#260930,.F.); +#260930 = EDGE_LOOP('',(#260931)); +#260931 = ORIENTED_EDGE('',*,*,#260932,.T.); +#260932 = EDGE_CURVE('',#260933,#260933,#260935,.T.); +#260933 = VERTEX_POINT('',#260934); +#260934 = CARTESIAN_POINT('',(194.851542,-66.0256,1.56)); +#260935 = CIRCLE('',#260936,0.487392); +#260936 = AXIS2_PLACEMENT_3D('',#260937,#260938,#260939); +#260937 = CARTESIAN_POINT('',(194.36415,-66.0256,1.56)); +#260938 = DIRECTION('',(0.,0.,1.)); +#260939 = DIRECTION('',(1.,0.,-0.)); +#260940 = FACE_BOUND('',#260941,.F.); +#260941 = EDGE_LOOP('',(#260942)); +#260942 = ORIENTED_EDGE('',*,*,#260943,.T.); +#260943 = EDGE_CURVE('',#260944,#260944,#260946,.T.); +#260944 = VERTEX_POINT('',#260945); +#260945 = CARTESIAN_POINT('',(210.654042,-61.8231,1.56)); +#260946 = CIRCLE('',#260947,0.462392); +#260947 = AXIS2_PLACEMENT_3D('',#260948,#260949,#260950); +#260948 = CARTESIAN_POINT('',(210.19165,-61.8231,1.56)); +#260949 = DIRECTION('',(0.,0.,1.)); +#260950 = DIRECTION('',(1.,0.,-0.)); +#260951 = FACE_BOUND('',#260952,.F.); +#260952 = EDGE_LOOP('',(#260953)); +#260953 = ORIENTED_EDGE('',*,*,#260954,.T.); +#260954 = EDGE_CURVE('',#260955,#260955,#260957,.T.); +#260955 = VERTEX_POINT('',#260956); +#260956 = CARTESIAN_POINT('',(210.654042,-59.3231,1.56)); +#260957 = CIRCLE('',#260958,0.462392); +#260958 = AXIS2_PLACEMENT_3D('',#260959,#260960,#260961); +#260959 = CARTESIAN_POINT('',(210.19165,-59.3231,1.56)); +#260960 = DIRECTION('',(0.,0.,1.)); +#260961 = DIRECTION('',(1.,0.,-0.)); +#260962 = FACE_BOUND('',#260963,.F.); +#260963 = EDGE_LOOP('',(#260964)); +#260964 = ORIENTED_EDGE('',*,*,#260965,.T.); +#260965 = EDGE_CURVE('',#260966,#260966,#260968,.T.); +#260966 = VERTEX_POINT('',#260967); +#260967 = CARTESIAN_POINT('',(189.771542,-58.4056,1.56)); +#260968 = CIRCLE('',#260969,0.487392); +#260969 = AXIS2_PLACEMENT_3D('',#260970,#260971,#260972); +#260970 = CARTESIAN_POINT('',(189.28415,-58.4056,1.56)); +#260971 = DIRECTION('',(0.,0.,1.)); +#260972 = DIRECTION('',(1.,0.,-0.)); +#260973 = FACE_BOUND('',#260974,.F.); +#260974 = EDGE_LOOP('',(#260975)); +#260975 = ORIENTED_EDGE('',*,*,#260976,.T.); +#260976 = EDGE_CURVE('',#260977,#260977,#260979,.T.); +#260977 = VERTEX_POINT('',#260978); +#260978 = CARTESIAN_POINT('',(194.851542,-58.4056,1.56)); +#260979 = CIRCLE('',#260980,0.487392); +#260980 = AXIS2_PLACEMENT_3D('',#260981,#260982,#260983); +#260981 = CARTESIAN_POINT('',(194.36415,-58.4056,1.56)); +#260982 = DIRECTION('',(0.,0.,1.)); +#260983 = DIRECTION('',(1.,0.,-0.)); +#260984 = FACE_BOUND('',#260985,.F.); +#260985 = EDGE_LOOP('',(#260986)); +#260986 = ORIENTED_EDGE('',*,*,#260987,.T.); +#260987 = EDGE_CURVE('',#260988,#260988,#260990,.T.); +#260988 = VERTEX_POINT('',#260989); +#260989 = CARTESIAN_POINT('',(210.654042,-56.8231,1.56)); +#260990 = CIRCLE('',#260991,0.462392); +#260991 = AXIS2_PLACEMENT_3D('',#260992,#260993,#260994); +#260992 = CARTESIAN_POINT('',(210.19165,-56.8231,1.56)); +#260993 = DIRECTION('',(0.,0.,1.)); +#260994 = DIRECTION('',(1.,0.,-0.)); +#260995 = FACE_BOUND('',#260996,.F.); +#260996 = EDGE_LOOP('',(#260997)); +#260997 = ORIENTED_EDGE('',*,*,#260998,.T.); +#260998 = EDGE_CURVE('',#260999,#260999,#261001,.T.); +#260999 = VERTEX_POINT('',#261000); +#261000 = CARTESIAN_POINT('',(107.679042,-56.3231,1.56)); +#261001 = CIRCLE('',#261002,0.487392); +#261002 = AXIS2_PLACEMENT_3D('',#261003,#261004,#261005); +#261003 = CARTESIAN_POINT('',(107.19165,-56.3231,1.56)); +#261004 = DIRECTION('',(0.,0.,1.)); +#261005 = DIRECTION('',(1.,0.,-0.)); +#261006 = FACE_BOUND('',#261007,.F.); +#261007 = EDGE_LOOP('',(#261008)); +#261008 = ORIENTED_EDGE('',*,*,#261009,.T.); +#261009 = EDGE_CURVE('',#261010,#261010,#261012,.T.); +#261010 = VERTEX_POINT('',#261011); +#261011 = CARTESIAN_POINT('',(110.219042,-56.3231,1.56)); +#261012 = CIRCLE('',#261013,0.487392); +#261013 = AXIS2_PLACEMENT_3D('',#261014,#261015,#261016); +#261014 = CARTESIAN_POINT('',(109.73165,-56.3231,1.56)); +#261015 = DIRECTION('',(0.,0.,1.)); +#261016 = DIRECTION('',(1.,0.,-0.)); +#261017 = FACE_BOUND('',#261018,.F.); +#261018 = EDGE_LOOP('',(#261019)); +#261019 = ORIENTED_EDGE('',*,*,#261020,.T.); +#261020 = EDGE_CURVE('',#261021,#261021,#261023,.T.); +#261021 = VERTEX_POINT('',#261022); +#261022 = CARTESIAN_POINT('',(112.759042,-56.3231,1.56)); +#261023 = CIRCLE('',#261024,0.487392); +#261024 = AXIS2_PLACEMENT_3D('',#261025,#261026,#261027); +#261025 = CARTESIAN_POINT('',(112.27165,-56.3231,1.56)); +#261026 = DIRECTION('',(0.,0.,1.)); +#261027 = DIRECTION('',(1.,0.,-0.)); +#261028 = FACE_BOUND('',#261029,.F.); +#261029 = EDGE_LOOP('',(#261030)); +#261030 = ORIENTED_EDGE('',*,*,#261031,.T.); +#261031 = EDGE_CURVE('',#261032,#261032,#261034,.T.); +#261032 = VERTEX_POINT('',#261033); +#261033 = CARTESIAN_POINT('',(115.299042,-56.3231,1.56)); +#261034 = CIRCLE('',#261035,0.487392); +#261035 = AXIS2_PLACEMENT_3D('',#261036,#261037,#261038); +#261036 = CARTESIAN_POINT('',(114.81165,-56.3231,1.56)); +#261037 = DIRECTION('',(0.,0.,1.)); +#261038 = DIRECTION('',(1.,0.,-0.)); +#261039 = FACE_BOUND('',#261040,.F.); +#261040 = EDGE_LOOP('',(#261041)); +#261041 = ORIENTED_EDGE('',*,*,#261042,.T.); +#261042 = EDGE_CURVE('',#261043,#261043,#261045,.T.); +#261043 = VERTEX_POINT('',#261044); +#261044 = CARTESIAN_POINT('',(117.839042,-56.3231,1.56)); +#261045 = CIRCLE('',#261046,0.487392); +#261046 = AXIS2_PLACEMENT_3D('',#261047,#261048,#261049); +#261047 = CARTESIAN_POINT('',(117.35165,-56.3231,1.56)); +#261048 = DIRECTION('',(0.,0.,1.)); +#261049 = DIRECTION('',(1.,0.,-0.)); +#261050 = FACE_BOUND('',#261051,.F.); +#261051 = EDGE_LOOP('',(#261052)); +#261052 = ORIENTED_EDGE('',*,*,#261053,.T.); +#261053 = EDGE_CURVE('',#261054,#261054,#261056,.T.); +#261054 = VERTEX_POINT('',#261055); +#261055 = CARTESIAN_POINT('',(120.379042,-56.3231,1.56)); +#261056 = CIRCLE('',#261057,0.487392); +#261057 = AXIS2_PLACEMENT_3D('',#261058,#261059,#261060); +#261058 = CARTESIAN_POINT('',(119.89165,-56.3231,1.56)); +#261059 = DIRECTION('',(0.,0.,1.)); +#261060 = DIRECTION('',(1.,0.,-0.)); +#261061 = FACE_BOUND('',#261062,.F.); +#261062 = EDGE_LOOP('',(#261063)); +#261063 = ORIENTED_EDGE('',*,*,#261064,.T.); +#261064 = EDGE_CURVE('',#261065,#261065,#261067,.T.); +#261065 = VERTEX_POINT('',#261066); +#261066 = CARTESIAN_POINT('',(122.919042,-56.3231,1.56)); +#261067 = CIRCLE('',#261068,0.487392); +#261068 = AXIS2_PLACEMENT_3D('',#261069,#261070,#261071); +#261069 = CARTESIAN_POINT('',(122.43165,-56.3231,1.56)); +#261070 = DIRECTION('',(0.,0.,1.)); +#261071 = DIRECTION('',(1.,0.,-0.)); +#261072 = FACE_BOUND('',#261073,.F.); +#261073 = EDGE_LOOP('',(#261074)); +#261074 = ORIENTED_EDGE('',*,*,#261075,.T.); +#261075 = EDGE_CURVE('',#261076,#261076,#261078,.T.); +#261076 = VERTEX_POINT('',#261077); +#261077 = CARTESIAN_POINT('',(125.459042,-56.3231,1.56)); +#261078 = CIRCLE('',#261079,0.487392); +#261079 = AXIS2_PLACEMENT_3D('',#261080,#261081,#261082); +#261080 = CARTESIAN_POINT('',(124.97165,-56.3231,1.56)); +#261081 = DIRECTION('',(0.,0.,1.)); +#261082 = DIRECTION('',(1.,0.,-0.)); +#261083 = FACE_BOUND('',#261084,.F.); +#261084 = EDGE_LOOP('',(#261085)); +#261085 = ORIENTED_EDGE('',*,*,#261086,.T.); +#261086 = EDGE_CURVE('',#261087,#261087,#261089,.T.); +#261087 = VERTEX_POINT('',#261088); +#261088 = CARTESIAN_POINT('',(127.999042,-56.3231,1.56)); +#261089 = CIRCLE('',#261090,0.487392); +#261090 = AXIS2_PLACEMENT_3D('',#261091,#261092,#261093); +#261091 = CARTESIAN_POINT('',(127.51165,-56.3231,1.56)); +#261092 = DIRECTION('',(0.,0.,1.)); +#261093 = DIRECTION('',(1.,0.,-0.)); +#261094 = FACE_BOUND('',#261095,.F.); +#261095 = EDGE_LOOP('',(#261096)); +#261096 = ORIENTED_EDGE('',*,*,#261097,.T.); +#261097 = EDGE_CURVE('',#261098,#261098,#261100,.T.); +#261098 = VERTEX_POINT('',#261099); +#261099 = CARTESIAN_POINT('',(130.539042,-56.3231,1.56)); +#261100 = CIRCLE('',#261101,0.487392); +#261101 = AXIS2_PLACEMENT_3D('',#261102,#261103,#261104); +#261102 = CARTESIAN_POINT('',(130.05165,-56.3231,1.56)); +#261103 = DIRECTION('',(0.,0.,1.)); +#261104 = DIRECTION('',(1.,0.,-0.)); +#261105 = FACE_BOUND('',#261106,.F.); +#261106 = EDGE_LOOP('',(#261107)); +#261107 = ORIENTED_EDGE('',*,*,#261108,.T.); +#261108 = EDGE_CURVE('',#261109,#261109,#261111,.T.); +#261109 = VERTEX_POINT('',#261110); +#261110 = CARTESIAN_POINT('',(133.079042,-56.3231,1.56)); +#261111 = CIRCLE('',#261112,0.487392); +#261112 = AXIS2_PLACEMENT_3D('',#261113,#261114,#261115); +#261113 = CARTESIAN_POINT('',(132.59165,-56.3231,1.56)); +#261114 = DIRECTION('',(0.,0.,1.)); +#261115 = DIRECTION('',(1.,0.,-0.)); +#261116 = FACE_BOUND('',#261117,.F.); +#261117 = EDGE_LOOP('',(#261118)); +#261118 = ORIENTED_EDGE('',*,*,#261119,.T.); +#261119 = EDGE_CURVE('',#261120,#261120,#261122,.T.); +#261120 = VERTEX_POINT('',#261121); +#261121 = CARTESIAN_POINT('',(135.619042,-56.3231,1.56)); +#261122 = CIRCLE('',#261123,0.487392); +#261123 = AXIS2_PLACEMENT_3D('',#261124,#261125,#261126); +#261124 = CARTESIAN_POINT('',(135.13165,-56.3231,1.56)); +#261125 = DIRECTION('',(0.,0.,1.)); +#261126 = DIRECTION('',(1.,0.,-0.)); +#261127 = FACE_BOUND('',#261128,.F.); +#261128 = EDGE_LOOP('',(#261129)); +#261129 = ORIENTED_EDGE('',*,*,#261130,.T.); +#261130 = EDGE_CURVE('',#261131,#261131,#261133,.T.); +#261131 = VERTEX_POINT('',#261132); +#261132 = CARTESIAN_POINT('',(138.159042,-56.3231,1.56)); +#261133 = CIRCLE('',#261134,0.487392); +#261134 = AXIS2_PLACEMENT_3D('',#261135,#261136,#261137); +#261135 = CARTESIAN_POINT('',(137.67165,-56.3231,1.56)); +#261136 = DIRECTION('',(0.,0.,1.)); +#261137 = DIRECTION('',(1.,0.,-0.)); +#261138 = FACE_BOUND('',#261139,.F.); +#261139 = EDGE_LOOP('',(#261140)); +#261140 = ORIENTED_EDGE('',*,*,#261141,.T.); +#261141 = EDGE_CURVE('',#261142,#261142,#261144,.T.); +#261142 = VERTEX_POINT('',#261143); +#261143 = CARTESIAN_POINT('',(140.699042,-56.3231,1.56)); +#261144 = CIRCLE('',#261145,0.487392); +#261145 = AXIS2_PLACEMENT_3D('',#261146,#261147,#261148); +#261146 = CARTESIAN_POINT('',(140.21165,-56.3231,1.56)); +#261147 = DIRECTION('',(0.,0.,1.)); +#261148 = DIRECTION('',(1.,0.,-0.)); +#261149 = FACE_BOUND('',#261150,.F.); +#261150 = EDGE_LOOP('',(#261151)); +#261151 = ORIENTED_EDGE('',*,*,#261152,.T.); +#261152 = EDGE_CURVE('',#261153,#261153,#261155,.T.); +#261153 = VERTEX_POINT('',#261154); +#261154 = CARTESIAN_POINT('',(143.239042,-56.3231,1.56)); +#261155 = CIRCLE('',#261156,0.487392); +#261156 = AXIS2_PLACEMENT_3D('',#261157,#261158,#261159); +#261157 = CARTESIAN_POINT('',(142.75165,-56.3231,1.56)); +#261158 = DIRECTION('',(0.,0.,1.)); +#261159 = DIRECTION('',(1.,0.,-0.)); +#261160 = FACE_BOUND('',#261161,.F.); +#261161 = EDGE_LOOP('',(#261162)); +#261162 = ORIENTED_EDGE('',*,*,#261163,.T.); +#261163 = EDGE_CURVE('',#261164,#261164,#261166,.T.); +#261164 = VERTEX_POINT('',#261165); +#261165 = CARTESIAN_POINT('',(145.779042,-56.3231,1.56)); +#261166 = CIRCLE('',#261167,0.487392); +#261167 = AXIS2_PLACEMENT_3D('',#261168,#261169,#261170); +#261168 = CARTESIAN_POINT('',(145.29165,-56.3231,1.56)); +#261169 = DIRECTION('',(0.,0.,1.)); +#261170 = DIRECTION('',(1.,0.,-0.)); +#261171 = FACE_BOUND('',#261172,.F.); +#261172 = EDGE_LOOP('',(#261173)); +#261173 = ORIENTED_EDGE('',*,*,#261174,.T.); +#261174 = EDGE_CURVE('',#261175,#261175,#261177,.T.); +#261175 = VERTEX_POINT('',#261176); +#261176 = CARTESIAN_POINT('',(148.319042,-56.3231,1.56)); +#261177 = CIRCLE('',#261178,0.487392); +#261178 = AXIS2_PLACEMENT_3D('',#261179,#261180,#261181); +#261179 = CARTESIAN_POINT('',(147.83165,-56.3231,1.56)); +#261180 = DIRECTION('',(0.,0.,1.)); +#261181 = DIRECTION('',(1.,0.,-0.)); +#261182 = FACE_BOUND('',#261183,.F.); +#261183 = EDGE_LOOP('',(#261184)); +#261184 = ORIENTED_EDGE('',*,*,#261185,.T.); +#261185 = EDGE_CURVE('',#261186,#261186,#261188,.T.); +#261186 = VERTEX_POINT('',#261187); +#261187 = CARTESIAN_POINT('',(150.859042,-56.3231,1.56)); +#261188 = CIRCLE('',#261189,0.487392); +#261189 = AXIS2_PLACEMENT_3D('',#261190,#261191,#261192); +#261190 = CARTESIAN_POINT('',(150.37165,-56.3231,1.56)); +#261191 = DIRECTION('',(0.,0.,1.)); +#261192 = DIRECTION('',(1.,0.,-0.)); +#261193 = FACE_BOUND('',#261194,.F.); +#261194 = EDGE_LOOP('',(#261195)); +#261195 = ORIENTED_EDGE('',*,*,#261196,.T.); +#261196 = EDGE_CURVE('',#261197,#261197,#261199,.T.); +#261197 = VERTEX_POINT('',#261198); +#261198 = CARTESIAN_POINT('',(153.399042,-56.3231,1.56)); +#261199 = CIRCLE('',#261200,0.487392); +#261200 = AXIS2_PLACEMENT_3D('',#261201,#261202,#261203); +#261201 = CARTESIAN_POINT('',(152.91165,-56.3231,1.56)); +#261202 = DIRECTION('',(0.,0.,1.)); +#261203 = DIRECTION('',(1.,0.,-0.)); +#261204 = FACE_BOUND('',#261205,.F.); +#261205 = EDGE_LOOP('',(#261206)); +#261206 = ORIENTED_EDGE('',*,*,#261207,.T.); +#261207 = EDGE_CURVE('',#261208,#261208,#261210,.T.); +#261208 = VERTEX_POINT('',#261209); +#261209 = CARTESIAN_POINT('',(155.939042,-56.3231,1.56)); +#261210 = CIRCLE('',#261211,0.487392); +#261211 = AXIS2_PLACEMENT_3D('',#261212,#261213,#261214); +#261212 = CARTESIAN_POINT('',(155.45165,-56.3231,1.56)); +#261213 = DIRECTION('',(0.,0.,1.)); +#261214 = DIRECTION('',(1.,0.,-0.)); +#261215 = FACE_BOUND('',#261216,.F.); +#261216 = EDGE_LOOP('',(#261217)); +#261217 = ORIENTED_EDGE('',*,*,#261218,.T.); +#261218 = EDGE_CURVE('',#261219,#261219,#261221,.T.); +#261219 = VERTEX_POINT('',#261220); +#261220 = CARTESIAN_POINT('',(189.771542,-55.8656,1.56)); +#261221 = CIRCLE('',#261222,0.487392); +#261222 = AXIS2_PLACEMENT_3D('',#261223,#261224,#261225); +#261223 = CARTESIAN_POINT('',(189.28415,-55.8656,1.56)); +#261224 = DIRECTION('',(0.,0.,1.)); +#261225 = DIRECTION('',(1.,0.,-0.)); +#261226 = FACE_BOUND('',#261227,.F.); +#261227 = EDGE_LOOP('',(#261228)); +#261228 = ORIENTED_EDGE('',*,*,#261229,.T.); +#261229 = EDGE_CURVE('',#261230,#261230,#261232,.T.); +#261230 = VERTEX_POINT('',#261231); +#261231 = CARTESIAN_POINT('',(194.851542,-55.8656,1.56)); +#261232 = CIRCLE('',#261233,0.487392); +#261233 = AXIS2_PLACEMENT_3D('',#261234,#261235,#261236); +#261234 = CARTESIAN_POINT('',(194.36415,-55.8656,1.56)); +#261235 = DIRECTION('',(0.,0.,1.)); +#261236 = DIRECTION('',(1.,0.,-0.)); +#261237 = FACE_BOUND('',#261238,.F.); +#261238 = EDGE_LOOP('',(#261239)); +#261239 = ORIENTED_EDGE('',*,*,#261240,.T.); +#261240 = EDGE_CURVE('',#261241,#261241,#261243,.T.); +#261241 = VERTEX_POINT('',#261242); +#261242 = CARTESIAN_POINT('',(210.654042,-54.3231,1.56)); +#261243 = CIRCLE('',#261244,0.462392); +#261244 = AXIS2_PLACEMENT_3D('',#261245,#261246,#261247); +#261245 = CARTESIAN_POINT('',(210.19165,-54.3231,1.56)); +#261246 = DIRECTION('',(0.,0.,1.)); +#261247 = DIRECTION('',(1.,0.,-0.)); +#261248 = FACE_BOUND('',#261249,.F.); +#261249 = EDGE_LOOP('',(#261250)); +#261250 = ORIENTED_EDGE('',*,*,#261251,.T.); +#261251 = EDGE_CURVE('',#261252,#261252,#261254,.T.); +#261252 = VERTEX_POINT('',#261253); +#261253 = CARTESIAN_POINT('',(111.679042,-51.4031,1.56)); +#261254 = CIRCLE('',#261255,0.487392); +#261255 = AXIS2_PLACEMENT_3D('',#261256,#261257,#261258); +#261256 = CARTESIAN_POINT('',(111.19165,-51.4031,1.56)); +#261257 = DIRECTION('',(0.,0.,1.)); +#261258 = DIRECTION('',(1.,0.,-0.)); +#261259 = FACE_BOUND('',#261260,.F.); +#261260 = EDGE_LOOP('',(#261261)); +#261261 = ORIENTED_EDGE('',*,*,#261262,.T.); +#261262 = EDGE_CURVE('',#261263,#261263,#261265,.T.); +#261263 = VERTEX_POINT('',#261264); +#261264 = CARTESIAN_POINT('',(111.679042,-48.8631,1.56)); +#261265 = CIRCLE('',#261266,0.487392); +#261266 = AXIS2_PLACEMENT_3D('',#261267,#261268,#261269); +#261267 = CARTESIAN_POINT('',(111.19165,-48.8631,1.56)); +#261268 = DIRECTION('',(0.,0.,1.)); +#261269 = DIRECTION('',(1.,0.,-0.)); +#261270 = FACE_BOUND('',#261271,.F.); +#261271 = EDGE_LOOP('',(#261272)); +#261272 = ORIENTED_EDGE('',*,*,#261273,.T.); +#261273 = EDGE_CURVE('',#261274,#261274,#261276,.T.); +#261274 = VERTEX_POINT('',#261275); +#261275 = CARTESIAN_POINT('',(86.779112,-45.3231,1.56)); +#261276 = CIRCLE('',#261277,1.587462); +#261277 = AXIS2_PLACEMENT_3D('',#261278,#261279,#261280); +#261278 = CARTESIAN_POINT('',(85.19165,-45.3231,1.56)); +#261279 = DIRECTION('',(0.,0.,1.)); +#261280 = DIRECTION('',(1.,0.,-0.)); +#261281 = FACE_BOUND('',#261282,.F.); +#261282 = EDGE_LOOP('',(#261283)); +#261283 = ORIENTED_EDGE('',*,*,#261284,.T.); +#261284 = EDGE_CURVE('',#261285,#261285,#261287,.T.); +#261285 = VERTEX_POINT('',#261286); +#261286 = CARTESIAN_POINT('',(212.779112,-45.3231,1.56)); +#261287 = CIRCLE('',#261288,1.587462); +#261288 = AXIS2_PLACEMENT_3D('',#261289,#261290,#261291); +#261289 = CARTESIAN_POINT('',(211.19165,-45.3231,1.56)); +#261290 = DIRECTION('',(0.,0.,1.)); +#261291 = DIRECTION('',(1.,0.,-0.)); +#261292 = FACE_BOUND('',#261293,.F.); +#261293 = EDGE_LOOP('',(#261294)); +#261294 = ORIENTED_EDGE('',*,*,#261295,.T.); +#261295 = EDGE_CURVE('',#261296,#261296,#261298,.T.); +#261296 = VERTEX_POINT('',#261297); +#261297 = CARTESIAN_POINT('',(111.679042,-46.3231,1.56)); +#261298 = CIRCLE('',#261299,0.487392); +#261299 = AXIS2_PLACEMENT_3D('',#261300,#261301,#261302); +#261300 = CARTESIAN_POINT('',(111.19165,-46.3231,1.56)); +#261301 = DIRECTION('',(0.,0.,1.)); +#261302 = DIRECTION('',(1.,0.,-0.)); +#261303 = FACE_BOUND('',#261304,.F.); +#261304 = EDGE_LOOP('',(#261305)); +#261305 = ORIENTED_EDGE('',*,*,#261306,.T.); +#261306 = EDGE_CURVE('',#261307,#261307,#261309,.T.); +#261307 = VERTEX_POINT('',#261308); +#261308 = CARTESIAN_POINT('',(127.679042,-46.3231,1.56)); +#261309 = CIRCLE('',#261310,0.487392); +#261310 = AXIS2_PLACEMENT_3D('',#261311,#261312,#261313); +#261311 = CARTESIAN_POINT('',(127.19165,-46.3231,1.56)); +#261312 = DIRECTION('',(0.,0.,1.)); +#261313 = DIRECTION('',(1.,0.,-0.)); +#261314 = FACE_BOUND('',#261315,.F.); +#261315 = EDGE_LOOP('',(#261316)); +#261316 = ORIENTED_EDGE('',*,*,#261317,.T.); +#261317 = EDGE_CURVE('',#261318,#261318,#261320,.T.); +#261318 = VERTEX_POINT('',#261319); +#261319 = CARTESIAN_POINT('',(130.179042,-46.3231,1.56)); +#261320 = CIRCLE('',#261321,0.487392); +#261321 = AXIS2_PLACEMENT_3D('',#261322,#261323,#261324); +#261322 = CARTESIAN_POINT('',(129.69165,-46.3231,1.56)); +#261323 = DIRECTION('',(0.,0.,1.)); +#261324 = DIRECTION('',(1.,0.,-0.)); +#261325 = FACE_BOUND('',#261326,.F.); +#261326 = EDGE_LOOP('',(#261327)); +#261327 = ORIENTED_EDGE('',*,*,#261328,.T.); +#261328 = EDGE_CURVE('',#261329,#261329,#261331,.T.); +#261329 = VERTEX_POINT('',#261330); +#261330 = CARTESIAN_POINT('',(136.279042,-46.3231,1.56)); +#261331 = CIRCLE('',#261332,0.487392); +#261332 = AXIS2_PLACEMENT_3D('',#261333,#261334,#261335); +#261333 = CARTESIAN_POINT('',(135.79165,-46.3231,1.56)); +#261334 = DIRECTION('',(0.,0.,1.)); +#261335 = DIRECTION('',(1.,0.,-0.)); +#261336 = FACE_BOUND('',#261337,.F.); +#261337 = EDGE_LOOP('',(#261338)); +#261338 = ORIENTED_EDGE('',*,*,#261339,.T.); +#261339 = EDGE_CURVE('',#261340,#261340,#261342,.T.); +#261340 = VERTEX_POINT('',#261341); +#261341 = CARTESIAN_POINT('',(138.779042,-46.3231,1.56)); +#261342 = CIRCLE('',#261343,0.487392); +#261343 = AXIS2_PLACEMENT_3D('',#261344,#261345,#261346); +#261344 = CARTESIAN_POINT('',(138.29165,-46.3231,1.56)); +#261345 = DIRECTION('',(0.,0.,1.)); +#261346 = DIRECTION('',(1.,0.,-0.)); +#261347 = FACE_BOUND('',#261348,.F.); +#261348 = EDGE_LOOP('',(#261349)); +#261349 = ORIENTED_EDGE('',*,*,#261350,.T.); +#261350 = EDGE_CURVE('',#261351,#261351,#261353,.T.); +#261351 = VERTEX_POINT('',#261352); +#261352 = CARTESIAN_POINT('',(98.654042,-46.3231,1.56)); +#261353 = CIRCLE('',#261354,0.462392); +#261354 = AXIS2_PLACEMENT_3D('',#261355,#261356,#261357); +#261355 = CARTESIAN_POINT('',(98.19165,-46.3231,1.56)); +#261356 = DIRECTION('',(0.,0.,1.)); +#261357 = DIRECTION('',(1.,0.,-0.)); +#261358 = FACE_BOUND('',#261359,.F.); +#261359 = EDGE_LOOP('',(#261360)); +#261360 = ORIENTED_EDGE('',*,*,#261361,.T.); +#261361 = EDGE_CURVE('',#261362,#261362,#261364,.T.); +#261362 = VERTEX_POINT('',#261363); +#261363 = CARTESIAN_POINT('',(101.154042,-46.3231,1.56)); +#261364 = CIRCLE('',#261365,0.462392); +#261365 = AXIS2_PLACEMENT_3D('',#261366,#261367,#261368); +#261366 = CARTESIAN_POINT('',(100.69165,-46.3231,1.56)); +#261367 = DIRECTION('',(0.,0.,1.)); +#261368 = DIRECTION('',(1.,0.,-0.)); +#261369 = FACE_BOUND('',#261370,.F.); +#261370 = EDGE_LOOP('',(#261371)); +#261371 = ORIENTED_EDGE('',*,*,#261372,.T.); +#261372 = EDGE_CURVE('',#261373,#261373,#261375,.T.); +#261373 = VERTEX_POINT('',#261374); +#261374 = CARTESIAN_POINT('',(103.654042,-46.3231,1.56)); +#261375 = CIRCLE('',#261376,0.462392); +#261376 = AXIS2_PLACEMENT_3D('',#261377,#261378,#261379); +#261377 = CARTESIAN_POINT('',(103.19165,-46.3231,1.56)); +#261378 = DIRECTION('',(0.,0.,1.)); +#261379 = DIRECTION('',(1.,0.,-0.)); +#261380 = FACE_BOUND('',#261381,.F.); +#261381 = EDGE_LOOP('',(#261382)); +#261382 = ORIENTED_EDGE('',*,*,#261383,.T.); +#261383 = EDGE_CURVE('',#261384,#261384,#261386,.T.); +#261384 = VERTEX_POINT('',#261385); +#261385 = CARTESIAN_POINT('',(106.154042,-46.3231,1.56)); +#261386 = CIRCLE('',#261387,0.462392); +#261387 = AXIS2_PLACEMENT_3D('',#261388,#261389,#261390); +#261388 = CARTESIAN_POINT('',(105.69165,-46.3231,1.56)); +#261389 = DIRECTION('',(0.,0.,1.)); +#261390 = DIRECTION('',(1.,0.,-0.)); +#261391 = FACE_BOUND('',#261392,.F.); +#261392 = EDGE_LOOP('',(#261393)); +#261393 = ORIENTED_EDGE('',*,*,#261394,.T.); +#261394 = EDGE_CURVE('',#261395,#261395,#261397,.T.); +#261395 = VERTEX_POINT('',#261396); +#261396 = CARTESIAN_POINT('',(116.654042,-46.3231,1.56)); +#261397 = CIRCLE('',#261398,0.462392); +#261398 = AXIS2_PLACEMENT_3D('',#261399,#261400,#261401); +#261399 = CARTESIAN_POINT('',(116.19165,-46.3231,1.56)); +#261400 = DIRECTION('',(0.,0.,1.)); +#261401 = DIRECTION('',(1.,0.,-0.)); +#261402 = FACE_BOUND('',#261403,.F.); +#261403 = EDGE_LOOP('',(#261404)); +#261404 = ORIENTED_EDGE('',*,*,#261405,.T.); +#261405 = EDGE_CURVE('',#261406,#261406,#261408,.T.); +#261406 = VERTEX_POINT('',#261407); +#261407 = CARTESIAN_POINT('',(119.154042,-46.3231,1.56)); +#261408 = CIRCLE('',#261409,0.462392); +#261409 = AXIS2_PLACEMENT_3D('',#261410,#261411,#261412); +#261410 = CARTESIAN_POINT('',(118.69165,-46.3231,1.56)); +#261411 = DIRECTION('',(0.,0.,1.)); +#261412 = DIRECTION('',(1.,0.,-0.)); +#261413 = FACE_BOUND('',#261414,.F.); +#261414 = EDGE_LOOP('',(#261415)); +#261415 = ORIENTED_EDGE('',*,*,#261416,.T.); +#261416 = EDGE_CURVE('',#261417,#261417,#261419,.T.); +#261417 = VERTEX_POINT('',#261418); +#261418 = CARTESIAN_POINT('',(121.654042,-46.3231,1.56)); +#261419 = CIRCLE('',#261420,0.462392); +#261420 = AXIS2_PLACEMENT_3D('',#261421,#261422,#261423); +#261421 = CARTESIAN_POINT('',(121.19165,-46.3231,1.56)); +#261422 = DIRECTION('',(0.,0.,1.)); +#261423 = DIRECTION('',(1.,0.,-0.)); +#261424 = PLANE('',#261425); +#261425 = AXIS2_PLACEMENT_3D('',#261426,#261427,#261428); +#261426 = CARTESIAN_POINT('',(0.,0.,1.56)); +#261427 = DIRECTION('',(0.,0.,1.)); +#261428 = DIRECTION('',(1.,0.,-0.)); +#261429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#261433)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#261430,#261431,#261432)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#261430 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#261431 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#261432 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#261433 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#261430, + 'distance_accuracy_value','confusion accuracy'); +#261434 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#261435,#261437); +#261435 = ( REPRESENTATION_RELATIONSHIP('','',#259300,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#261436) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#261436 = ITEM_DEFINED_TRANSFORMATION('','',#11,#503); +#261437 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #261438); +#261438 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('160','=>[0:1:1:71]','',#5, + #259295,$); +#261439 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#259297)); +#261440 = SHAPE_DEFINITION_REPRESENTATION(#261441,#261447); +#261441 = PRODUCT_DEFINITION_SHAPE('','',#261442); +#261442 = PRODUCT_DEFINITION('design','',#261443,#261446); +#261443 = PRODUCT_DEFINITION_FORMATION('','',#261444); +#261444 = PRODUCT( + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_soldermask', + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_soldermask','',(#261445) + ); +#261445 = PRODUCT_CONTEXT('',#2,'mechanical'); +#261446 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#261447 = MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#11,#261448),#263440 + ); +#261448 = SHELL_BASED_SURFACE_MODEL('',(#261449)); +#261449 = OPEN_SHELL('',(#261450)); +#261450 = ADVANCED_FACE('',(#261451,#261485,#261496,#261507,#261518, + #261529,#261582,#261635,#261646,#261657,#261668,#261679,#261690, + #261701,#261712,#261765,#261818,#261829,#261840,#261851,#261862, + #261873,#261884,#261895,#261906,#261917,#261928,#261939,#261950, + #261961,#261972,#261983,#261994,#262005,#262016,#262027,#262038, + #262049,#262060,#262071,#262082,#262093,#262104,#262115,#262126, + #262137,#262148,#262159,#262170,#262181,#262192,#262203,#262214, + #262225,#262236,#262247,#262258,#262269,#262280,#262291,#262302, + #262313,#262324,#262335,#262346,#262357,#262368,#262379,#262390, + #262401,#262412,#262423,#262434,#262445,#262456,#262467,#262478, + #262489,#262500,#262511,#262522,#262533,#262544,#262555,#262566, + #262577,#262588,#262599,#262610,#262621,#262632,#262643,#262654, + #262665,#262676,#262687,#262698,#262709,#262720,#262731,#262742, + #262753,#262764,#262775,#262786,#262797,#262808,#262819,#262830, + #262841,#262852,#262863,#262874,#262885,#262896,#262907,#262918, + #262929,#262940,#262951,#262962,#262973,#262984,#262995,#263006, + #263017,#263028,#263039,#263050,#263061,#263072,#263083,#263094, + #263105,#263116,#263127,#263138,#263149,#263160,#263171,#263182, + #263193,#263204,#263215,#263226,#263237,#263248,#263259,#263270, + #263281,#263292,#263303,#263314,#263325,#263336,#263347,#263358, + #263369,#263380,#263391,#263402,#263413,#263424),#263435,.T.); +#261451 = FACE_BOUND('',#261452,.T.); +#261452 = EDGE_LOOP('',(#261453,#261463,#261471,#261479)); +#261453 = ORIENTED_EDGE('',*,*,#261454,.T.); +#261454 = EDGE_CURVE('',#261455,#261457,#261459,.T.); +#261455 = VERTEX_POINT('',#261456); +#261456 = CARTESIAN_POINT('',(80.19165,-140.3231,-5.E-02)); +#261457 = VERTEX_POINT('',#261458); +#261458 = CARTESIAN_POINT('',(80.19165,-40.3231,-5.E-02)); +#261459 = LINE('',#261460,#261461); +#261460 = CARTESIAN_POINT('',(80.19165,-140.3231,-5.E-02)); +#261461 = VECTOR('',#261462,1.); +#261462 = DIRECTION('',(0.,1.,0.)); +#261463 = ORIENTED_EDGE('',*,*,#261464,.T.); +#261464 = EDGE_CURVE('',#261457,#261465,#261467,.T.); +#261465 = VERTEX_POINT('',#261466); +#261466 = CARTESIAN_POINT('',(215.19165,-40.3231,-5.E-02)); +#261467 = LINE('',#261468,#261469); +#261468 = CARTESIAN_POINT('',(80.19165,-40.3231,-5.E-02)); +#261469 = VECTOR('',#261470,1.); +#261470 = DIRECTION('',(1.,0.,0.)); +#261471 = ORIENTED_EDGE('',*,*,#261472,.T.); +#261472 = EDGE_CURVE('',#261465,#261473,#261475,.T.); +#261473 = VERTEX_POINT('',#261474); +#261474 = CARTESIAN_POINT('',(215.19165,-140.3231,-5.E-02)); +#261475 = LINE('',#261476,#261477); +#261476 = CARTESIAN_POINT('',(215.19165,-40.3231,-5.E-02)); +#261477 = VECTOR('',#261478,1.); +#261478 = DIRECTION('',(0.,-1.,0.)); +#261479 = ORIENTED_EDGE('',*,*,#261480,.T.); +#261480 = EDGE_CURVE('',#261473,#261455,#261481,.T.); +#261481 = LINE('',#261482,#261483); +#261482 = CARTESIAN_POINT('',(215.19165,-140.3231,-5.E-02)); +#261483 = VECTOR('',#261484,1.); +#261484 = DIRECTION('',(-1.,0.,0.)); +#261485 = FACE_BOUND('',#261486,.T.); +#261486 = EDGE_LOOP('',(#261487)); +#261487 = ORIENTED_EDGE('',*,*,#261488,.T.); +#261488 = EDGE_CURVE('',#261489,#261489,#261491,.T.); +#261489 = VERTEX_POINT('',#261490); +#261490 = CARTESIAN_POINT('',(199.729042,-137.8231,-5.E-02)); +#261491 = CIRCLE('',#261492,0.537392); +#261492 = AXIS2_PLACEMENT_3D('',#261493,#261494,#261495); +#261493 = CARTESIAN_POINT('',(199.19165,-137.8231,-5.E-02)); +#261494 = DIRECTION('',(0.,0.,1.)); +#261495 = DIRECTION('',(1.,0.,-0.)); +#261496 = FACE_BOUND('',#261497,.T.); +#261497 = EDGE_LOOP('',(#261498)); +#261498 = ORIENTED_EDGE('',*,*,#261499,.T.); +#261499 = EDGE_CURVE('',#261500,#261500,#261502,.T.); +#261500 = VERTEX_POINT('',#261501); +#261501 = CARTESIAN_POINT('',(206.229042,-137.8231,-5.E-02)); +#261502 = CIRCLE('',#261503,0.537392); +#261503 = AXIS2_PLACEMENT_3D('',#261504,#261505,#261506); +#261504 = CARTESIAN_POINT('',(205.69165,-137.8231,-5.E-02)); +#261505 = DIRECTION('',(0.,0.,1.)); +#261506 = DIRECTION('',(1.,0.,-0.)); +#261507 = FACE_BOUND('',#261508,.T.); +#261508 = EDGE_LOOP('',(#261509)); +#261509 = ORIENTED_EDGE('',*,*,#261510,.T.); +#261510 = EDGE_CURVE('',#261511,#261511,#261513,.T.); +#261511 = VERTEX_POINT('',#261512); +#261512 = CARTESIAN_POINT('',(86.779112,-135.3231,-5.E-02)); +#261513 = CIRCLE('',#261514,1.587462); +#261514 = AXIS2_PLACEMENT_3D('',#261515,#261516,#261517); +#261515 = CARTESIAN_POINT('',(85.19165,-135.3231,-5.E-02)); +#261516 = DIRECTION('',(0.,0.,1.)); +#261517 = DIRECTION('',(1.,0.,-0.)); +#261518 = FACE_BOUND('',#261519,.T.); +#261519 = EDGE_LOOP('',(#261520)); +#261520 = ORIENTED_EDGE('',*,*,#261521,.T.); +#261521 = EDGE_CURVE('',#261522,#261522,#261524,.T.); +#261522 = VERTEX_POINT('',#261523); +#261523 = CARTESIAN_POINT('',(212.779112,-135.3231,-5.E-02)); +#261524 = CIRCLE('',#261525,1.587462); +#261525 = AXIS2_PLACEMENT_3D('',#261526,#261527,#261528); +#261526 = CARTESIAN_POINT('',(211.19165,-135.3231,-5.E-02)); +#261527 = DIRECTION('',(0.,0.,1.)); +#261528 = DIRECTION('',(1.,0.,-0.)); +#261529 = FACE_BOUND('',#261530,.T.); +#261530 = EDGE_LOOP('',(#261531,#261542,#261550,#261559,#261567,#261576) + ); +#261531 = ORIENTED_EDGE('',*,*,#261532,.T.); +#261532 = EDGE_CURVE('',#261533,#261535,#261537,.T.); +#261533 = VERTEX_POINT('',#261534); +#261534 = CARTESIAN_POINT('',(159.5375,-134.184593,-5.E-02)); +#261535 = VERTEX_POINT('',#261536); +#261536 = CARTESIAN_POINT('',(159.862513,-134.469933,-5.E-02)); +#261537 = CIRCLE('',#261538,0.28758545494); +#261538 = AXIS2_PLACEMENT_3D('',#261539,#261540,#261541); +#261539 = CARTESIAN_POINT('',(159.82508538508,-134.184793442,-5.E-02)); +#261540 = DIRECTION('',(0.,0.,1.)); +#261541 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#261542 = ORIENTED_EDGE('',*,*,#261543,.T.); +#261543 = EDGE_CURVE('',#261535,#261544,#261546,.T.); +#261544 = VERTEX_POINT('',#261545); +#261545 = CARTESIAN_POINT('',(159.93498,-134.450515,-5.E-02)); +#261546 = LINE('',#261547,#261548); +#261547 = CARTESIAN_POINT('',(159.862513,-134.469933,-5.E-02)); +#261548 = VECTOR('',#261549,1.); +#261549 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261550 = ORIENTED_EDGE('',*,*,#261551,.T.); +#261551 = EDGE_CURVE('',#261544,#261552,#261554,.T.); +#261552 = VERTEX_POINT('',#261553); +#261553 = CARTESIAN_POINT('',(160.1125,-134.184593,-5.E-02)); +#261554 = CIRCLE('',#261555,0.287686427939); +#261555 = AXIS2_PLACEMENT_3D('',#261556,#261557,#261558); +#261556 = CARTESIAN_POINT('',(159.8248136193,-134.1847578751,-5.E-02)); +#261557 = DIRECTION('',(0.,0.,1.)); +#261558 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261559 = ORIENTED_EDGE('',*,*,#261560,.T.); +#261560 = EDGE_CURVE('',#261552,#261561,#261563,.T.); +#261561 = VERTEX_POINT('',#261562); +#261562 = CARTESIAN_POINT('',(160.1125,-133.385406,-5.E-02)); +#261563 = LINE('',#261564,#261565); +#261564 = CARTESIAN_POINT('',(160.1125,-134.184593,-5.E-02)); +#261565 = VECTOR('',#261566,1.); +#261566 = DIRECTION('',(0.,1.,0.)); +#261567 = ORIENTED_EDGE('',*,*,#261568,.T.); +#261568 = EDGE_CURVE('',#261561,#261569,#261571,.T.); +#261569 = VERTEX_POINT('',#261570); +#261570 = CARTESIAN_POINT('',(159.5375,-133.385406,-5.E-02)); +#261571 = CIRCLE('',#261572,0.287500026505); +#261572 = AXIS2_PLACEMENT_3D('',#261573,#261574,#261575); +#261573 = CARTESIAN_POINT('',(159.825,-133.3852825479,-5.E-02)); +#261574 = DIRECTION('',(0.,0.,1.)); +#261575 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261576 = ORIENTED_EDGE('',*,*,#261577,.T.); +#261577 = EDGE_CURVE('',#261569,#261533,#261578,.T.); +#261578 = LINE('',#261579,#261580); +#261579 = CARTESIAN_POINT('',(159.5375,-133.385406,-5.E-02)); +#261580 = VECTOR('',#261581,1.); +#261581 = DIRECTION('',(0.,-1.,0.)); +#261582 = FACE_BOUND('',#261583,.T.); +#261583 = EDGE_LOOP('',(#261584,#261595,#261603,#261612,#261620,#261629) + ); +#261584 = ORIENTED_EDGE('',*,*,#261585,.T.); +#261585 = EDGE_CURVE('',#261586,#261588,#261590,.T.); +#261586 = VERTEX_POINT('',#261587); +#261587 = CARTESIAN_POINT('',(168.1875,-134.184593,-5.E-02)); +#261588 = VERTEX_POINT('',#261589); +#261589 = CARTESIAN_POINT('',(168.512513,-134.469933,-5.E-02)); +#261590 = CIRCLE('',#261591,0.28758545494); +#261591 = AXIS2_PLACEMENT_3D('',#261592,#261593,#261594); +#261592 = CARTESIAN_POINT('',(168.47508538508,-134.184793442,-5.E-02)); +#261593 = DIRECTION('',(0.,0.,1.)); +#261594 = DIRECTION('',(-0.999999757108,6.969824075156E-04,0.)); +#261595 = ORIENTED_EDGE('',*,*,#261596,.T.); +#261596 = EDGE_CURVE('',#261588,#261597,#261599,.T.); +#261597 = VERTEX_POINT('',#261598); +#261598 = CARTESIAN_POINT('',(168.58498,-134.450515,-5.E-02)); +#261599 = LINE('',#261600,#261601); +#261600 = CARTESIAN_POINT('',(168.512513,-134.469933,-5.E-02)); +#261601 = VECTOR('',#261602,1.); +#261602 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261603 = ORIENTED_EDGE('',*,*,#261604,.T.); +#261604 = EDGE_CURVE('',#261597,#261605,#261607,.T.); +#261605 = VERTEX_POINT('',#261606); +#261606 = CARTESIAN_POINT('',(168.7625,-134.184593,-5.E-02)); +#261607 = CIRCLE('',#261608,0.287686427939); +#261608 = AXIS2_PLACEMENT_3D('',#261609,#261610,#261611); +#261609 = CARTESIAN_POINT('',(168.4748136193,-134.1847578751,-5.E-02)); +#261610 = DIRECTION('',(0.,0.,1.)); +#261611 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261612 = ORIENTED_EDGE('',*,*,#261613,.T.); +#261613 = EDGE_CURVE('',#261605,#261614,#261616,.T.); +#261614 = VERTEX_POINT('',#261615); +#261615 = CARTESIAN_POINT('',(168.7625,-133.385406,-5.E-02)); +#261616 = LINE('',#261617,#261618); +#261617 = CARTESIAN_POINT('',(168.7625,-134.184593,-5.E-02)); +#261618 = VECTOR('',#261619,1.); +#261619 = DIRECTION('',(0.,1.,0.)); +#261620 = ORIENTED_EDGE('',*,*,#261621,.T.); +#261621 = EDGE_CURVE('',#261614,#261622,#261624,.T.); +#261622 = VERTEX_POINT('',#261623); +#261623 = CARTESIAN_POINT('',(168.1875,-133.385406,-5.E-02)); +#261624 = CIRCLE('',#261625,0.287500026505); +#261625 = AXIS2_PLACEMENT_3D('',#261626,#261627,#261628); +#261626 = CARTESIAN_POINT('',(168.475,-133.3852825479,-5.E-02)); +#261627 = DIRECTION('',(0.,0.,1.)); +#261628 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261629 = ORIENTED_EDGE('',*,*,#261630,.T.); +#261630 = EDGE_CURVE('',#261622,#261586,#261631,.T.); +#261631 = LINE('',#261632,#261633); +#261632 = CARTESIAN_POINT('',(168.1875,-133.385406,-5.E-02)); +#261633 = VECTOR('',#261634,1.); +#261634 = DIRECTION('',(0.,-1.,0.)); +#261635 = FACE_BOUND('',#261636,.T.); +#261636 = EDGE_LOOP('',(#261637)); +#261637 = ORIENTED_EDGE('',*,*,#261638,.T.); +#261638 = EDGE_CURVE('',#261639,#261639,#261641,.T.); +#261639 = VERTEX_POINT('',#261640); +#261640 = CARTESIAN_POINT('',(173.329089,-133.8231,-5.E-02)); +#261641 = CIRCLE('',#261642,0.637439); +#261642 = AXIS2_PLACEMENT_3D('',#261643,#261644,#261645); +#261643 = CARTESIAN_POINT('',(172.69165,-133.8231,-5.E-02)); +#261644 = DIRECTION('',(0.,0.,1.)); +#261645 = DIRECTION('',(1.,0.,-0.)); +#261646 = FACE_BOUND('',#261647,.T.); +#261647 = EDGE_LOOP('',(#261648)); +#261648 = ORIENTED_EDGE('',*,*,#261649,.T.); +#261649 = EDGE_CURVE('',#261650,#261650,#261652,.T.); +#261650 = VERTEX_POINT('',#261651); +#261651 = CARTESIAN_POINT('',(178.329089,-133.8231,-5.E-02)); +#261652 = CIRCLE('',#261653,0.637439); +#261653 = AXIS2_PLACEMENT_3D('',#261654,#261655,#261656); +#261654 = CARTESIAN_POINT('',(177.69165,-133.8231,-5.E-02)); +#261655 = DIRECTION('',(0.,0.,1.)); +#261656 = DIRECTION('',(1.,0.,-0.)); +#261657 = FACE_BOUND('',#261658,.T.); +#261658 = EDGE_LOOP('',(#261659)); +#261659 = ORIENTED_EDGE('',*,*,#261660,.T.); +#261660 = EDGE_CURVE('',#261661,#261661,#261663,.T.); +#261661 = VERTEX_POINT('',#261662); +#261662 = CARTESIAN_POINT('',(183.329089,-133.8231,-5.E-02)); +#261663 = CIRCLE('',#261664,0.637439); +#261664 = AXIS2_PLACEMENT_3D('',#261665,#261666,#261667); +#261665 = CARTESIAN_POINT('',(182.69165,-133.8231,-5.E-02)); +#261666 = DIRECTION('',(0.,0.,1.)); +#261667 = DIRECTION('',(1.,0.,-0.)); +#261668 = FACE_BOUND('',#261669,.T.); +#261669 = EDGE_LOOP('',(#261670)); +#261670 = ORIENTED_EDGE('',*,*,#261671,.T.); +#261671 = EDGE_CURVE('',#261672,#261672,#261674,.T.); +#261672 = VERTEX_POINT('',#261673); +#261673 = CARTESIAN_POINT('',(188.329089,-133.8231,-5.E-02)); +#261674 = CIRCLE('',#261675,0.637439); +#261675 = AXIS2_PLACEMENT_3D('',#261676,#261677,#261678); +#261676 = CARTESIAN_POINT('',(187.69165,-133.8231,-5.E-02)); +#261677 = DIRECTION('',(0.,0.,1.)); +#261678 = DIRECTION('',(1.,0.,-0.)); +#261679 = FACE_BOUND('',#261680,.T.); +#261680 = EDGE_LOOP('',(#261681)); +#261681 = ORIENTED_EDGE('',*,*,#261682,.T.); +#261682 = EDGE_CURVE('',#261683,#261683,#261685,.T.); +#261683 = VERTEX_POINT('',#261684); +#261684 = CARTESIAN_POINT('',(193.329089,-133.8231,-5.E-02)); +#261685 = CIRCLE('',#261686,0.637439); +#261686 = AXIS2_PLACEMENT_3D('',#261687,#261688,#261689); +#261687 = CARTESIAN_POINT('',(192.69165,-133.8231,-5.E-02)); +#261688 = DIRECTION('',(0.,0.,1.)); +#261689 = DIRECTION('',(1.,0.,-0.)); +#261690 = FACE_BOUND('',#261691,.T.); +#261691 = EDGE_LOOP('',(#261692)); +#261692 = ORIENTED_EDGE('',*,*,#261693,.T.); +#261693 = EDGE_CURVE('',#261694,#261694,#261696,.T.); +#261694 = VERTEX_POINT('',#261695); +#261695 = CARTESIAN_POINT('',(199.729042,-133.3231,-5.E-02)); +#261696 = CIRCLE('',#261697,0.537392); +#261697 = AXIS2_PLACEMENT_3D('',#261698,#261699,#261700); +#261698 = CARTESIAN_POINT('',(199.19165,-133.3231,-5.E-02)); +#261699 = DIRECTION('',(0.,0.,1.)); +#261700 = DIRECTION('',(1.,0.,-0.)); +#261701 = FACE_BOUND('',#261702,.T.); +#261702 = EDGE_LOOP('',(#261703)); +#261703 = ORIENTED_EDGE('',*,*,#261704,.T.); +#261704 = EDGE_CURVE('',#261705,#261705,#261707,.T.); +#261705 = VERTEX_POINT('',#261706); +#261706 = CARTESIAN_POINT('',(206.229042,-133.3231,-5.E-02)); +#261707 = CIRCLE('',#261708,0.537392); +#261708 = AXIS2_PLACEMENT_3D('',#261709,#261710,#261711); +#261709 = CARTESIAN_POINT('',(205.69165,-133.3231,-5.E-02)); +#261710 = DIRECTION('',(0.,0.,1.)); +#261711 = DIRECTION('',(1.,0.,-0.)); +#261712 = FACE_BOUND('',#261713,.T.); +#261713 = EDGE_LOOP('',(#261714,#261725,#261733,#261742,#261750,#261759) + ); +#261714 = ORIENTED_EDGE('',*,*,#261715,.T.); +#261715 = EDGE_CURVE('',#261716,#261718,#261720,.T.); +#261716 = VERTEX_POINT('',#261717); +#261717 = CARTESIAN_POINT('',(159.5375,-131.154593,-5.E-02)); +#261718 = VERTEX_POINT('',#261719); +#261719 = CARTESIAN_POINT('',(159.862513,-131.439933,-5.E-02)); +#261720 = CIRCLE('',#261721,0.28758545494); +#261721 = AXIS2_PLACEMENT_3D('',#261722,#261723,#261724); +#261722 = CARTESIAN_POINT('',(159.82508538508,-131.154793442,-5.E-02)); +#261723 = DIRECTION('',(0.,0.,1.)); +#261724 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#261725 = ORIENTED_EDGE('',*,*,#261726,.T.); +#261726 = EDGE_CURVE('',#261718,#261727,#261729,.T.); +#261727 = VERTEX_POINT('',#261728); +#261728 = CARTESIAN_POINT('',(159.93498,-131.420515,-5.E-02)); +#261729 = LINE('',#261730,#261731); +#261730 = CARTESIAN_POINT('',(159.862513,-131.439933,-5.E-02)); +#261731 = VECTOR('',#261732,1.); +#261732 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261733 = ORIENTED_EDGE('',*,*,#261734,.T.); +#261734 = EDGE_CURVE('',#261727,#261735,#261737,.T.); +#261735 = VERTEX_POINT('',#261736); +#261736 = CARTESIAN_POINT('',(160.1125,-131.154593,-5.E-02)); +#261737 = CIRCLE('',#261738,0.287686427939); +#261738 = AXIS2_PLACEMENT_3D('',#261739,#261740,#261741); +#261739 = CARTESIAN_POINT('',(159.8248136193,-131.1547578751,-5.E-02)); +#261740 = DIRECTION('',(0.,0.,1.)); +#261741 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261742 = ORIENTED_EDGE('',*,*,#261743,.T.); +#261743 = EDGE_CURVE('',#261735,#261744,#261746,.T.); +#261744 = VERTEX_POINT('',#261745); +#261745 = CARTESIAN_POINT('',(160.1125,-129.655406,-5.E-02)); +#261746 = LINE('',#261747,#261748); +#261747 = CARTESIAN_POINT('',(160.1125,-131.154593,-5.E-02)); +#261748 = VECTOR('',#261749,1.); +#261749 = DIRECTION('',(0.,1.,0.)); +#261750 = ORIENTED_EDGE('',*,*,#261751,.T.); +#261751 = EDGE_CURVE('',#261744,#261752,#261754,.T.); +#261752 = VERTEX_POINT('',#261753); +#261753 = CARTESIAN_POINT('',(159.5375,-129.655406,-5.E-02)); +#261754 = CIRCLE('',#261755,0.287500026505); +#261755 = AXIS2_PLACEMENT_3D('',#261756,#261757,#261758); +#261756 = CARTESIAN_POINT('',(159.825,-129.6552825479,-5.E-02)); +#261757 = DIRECTION('',(0.,0.,1.)); +#261758 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261759 = ORIENTED_EDGE('',*,*,#261760,.T.); +#261760 = EDGE_CURVE('',#261752,#261716,#261761,.T.); +#261761 = LINE('',#261762,#261763); +#261762 = CARTESIAN_POINT('',(159.5375,-129.655406,-5.E-02)); +#261763 = VECTOR('',#261764,1.); +#261764 = DIRECTION('',(0.,-1.,0.)); +#261765 = FACE_BOUND('',#261766,.T.); +#261766 = EDGE_LOOP('',(#261767,#261778,#261786,#261795,#261803,#261812) + ); +#261767 = ORIENTED_EDGE('',*,*,#261768,.T.); +#261768 = EDGE_CURVE('',#261769,#261771,#261773,.T.); +#261769 = VERTEX_POINT('',#261770); +#261770 = CARTESIAN_POINT('',(168.1875,-131.154593,-5.E-02)); +#261771 = VERTEX_POINT('',#261772); +#261772 = CARTESIAN_POINT('',(168.512513,-131.439933,-5.E-02)); +#261773 = CIRCLE('',#261774,0.28758545494); +#261774 = AXIS2_PLACEMENT_3D('',#261775,#261776,#261777); +#261775 = CARTESIAN_POINT('',(168.47508538508,-131.154793442,-5.E-02)); +#261776 = DIRECTION('',(0.,0.,1.)); +#261777 = DIRECTION('',(-0.999999757108,6.969824076145E-04,0.)); +#261778 = ORIENTED_EDGE('',*,*,#261779,.T.); +#261779 = EDGE_CURVE('',#261771,#261780,#261782,.T.); +#261780 = VERTEX_POINT('',#261781); +#261781 = CARTESIAN_POINT('',(168.58498,-131.420515,-5.E-02)); +#261782 = LINE('',#261783,#261784); +#261783 = CARTESIAN_POINT('',(168.512513,-131.439933,-5.E-02)); +#261784 = VECTOR('',#261785,1.); +#261785 = DIRECTION('',(0.965924073909,0.258825584986,0.)); +#261786 = ORIENTED_EDGE('',*,*,#261787,.T.); +#261787 = EDGE_CURVE('',#261780,#261788,#261790,.T.); +#261788 = VERTEX_POINT('',#261789); +#261789 = CARTESIAN_POINT('',(168.7625,-131.154593,-5.E-02)); +#261790 = CIRCLE('',#261791,0.287686427939); +#261791 = AXIS2_PLACEMENT_3D('',#261792,#261793,#261794); +#261792 = CARTESIAN_POINT('',(168.4748136193,-131.1547578751,-5.E-02)); +#261793 = DIRECTION('',(0.,0.,1.)); +#261794 = DIRECTION('',(0.382939096163,-0.92377359165,0.)); +#261795 = ORIENTED_EDGE('',*,*,#261796,.T.); +#261796 = EDGE_CURVE('',#261788,#261797,#261799,.T.); +#261797 = VERTEX_POINT('',#261798); +#261798 = CARTESIAN_POINT('',(168.7625,-129.655406,-5.E-02)); +#261799 = LINE('',#261800,#261801); +#261800 = CARTESIAN_POINT('',(168.7625,-131.154593,-5.E-02)); +#261801 = VECTOR('',#261802,1.); +#261802 = DIRECTION('',(0.,1.,0.)); +#261803 = ORIENTED_EDGE('',*,*,#261804,.T.); +#261804 = EDGE_CURVE('',#261797,#261805,#261807,.T.); +#261805 = VERTEX_POINT('',#261806); +#261806 = CARTESIAN_POINT('',(168.1875,-129.655406,-5.E-02)); +#261807 = CIRCLE('',#261808,0.287500026505); +#261808 = AXIS2_PLACEMENT_3D('',#261809,#261810,#261811); +#261809 = CARTESIAN_POINT('',(168.475,-129.6552825479,-5.E-02)); +#261810 = DIRECTION('',(0.,0.,1.)); +#261811 = DIRECTION('',(0.999999907809,-4.293982551801E-04,0.)); +#261812 = ORIENTED_EDGE('',*,*,#261813,.T.); +#261813 = EDGE_CURVE('',#261805,#261769,#261814,.T.); +#261814 = LINE('',#261815,#261816); +#261815 = CARTESIAN_POINT('',(168.1875,-129.655406,-5.E-02)); +#261816 = VECTOR('',#261817,1.); +#261817 = DIRECTION('',(0.,-1.,0.)); +#261818 = FACE_BOUND('',#261819,.T.); +#261819 = EDGE_LOOP('',(#261820)); +#261820 = ORIENTED_EDGE('',*,*,#261821,.T.); +#261821 = EDGE_CURVE('',#261822,#261822,#261824,.T.); +#261822 = VERTEX_POINT('',#261823); +#261823 = CARTESIAN_POINT('',(161.362254,-130.775,-5.E-02)); +#261824 = CIRCLE('',#261825,0.187254); +#261825 = AXIS2_PLACEMENT_3D('',#261826,#261827,#261828); +#261826 = CARTESIAN_POINT('',(161.175,-130.775,-5.E-02)); +#261827 = DIRECTION('',(0.,0.,1.)); +#261828 = DIRECTION('',(1.,0.,-0.)); +#261829 = FACE_BOUND('',#261830,.T.); +#261830 = EDGE_LOOP('',(#261831)); +#261831 = ORIENTED_EDGE('',*,*,#261832,.T.); +#261832 = EDGE_CURVE('',#261833,#261833,#261835,.T.); +#261833 = VERTEX_POINT('',#261834); +#261834 = CARTESIAN_POINT('',(162.212254,-130.775,-5.E-02)); +#261835 = CIRCLE('',#261836,0.187254); +#261836 = AXIS2_PLACEMENT_3D('',#261837,#261838,#261839); +#261837 = CARTESIAN_POINT('',(162.025,-130.775,-5.E-02)); +#261838 = DIRECTION('',(0.,0.,1.)); +#261839 = DIRECTION('',(1.,0.,-0.)); +#261840 = FACE_BOUND('',#261841,.T.); +#261841 = EDGE_LOOP('',(#261842)); +#261842 = ORIENTED_EDGE('',*,*,#261843,.T.); +#261843 = EDGE_CURVE('',#261844,#261844,#261846,.T.); +#261844 = VERTEX_POINT('',#261845); +#261845 = CARTESIAN_POINT('',(163.062254,-130.775,-5.E-02)); +#261846 = CIRCLE('',#261847,0.187254); +#261847 = AXIS2_PLACEMENT_3D('',#261848,#261849,#261850); +#261848 = CARTESIAN_POINT('',(162.875,-130.775,-5.E-02)); +#261849 = DIRECTION('',(0.,0.,1.)); +#261850 = DIRECTION('',(1.,0.,-0.)); +#261851 = FACE_BOUND('',#261852,.T.); +#261852 = EDGE_LOOP('',(#261853)); +#261853 = ORIENTED_EDGE('',*,*,#261854,.T.); +#261854 = EDGE_CURVE('',#261855,#261855,#261857,.T.); +#261855 = VERTEX_POINT('',#261856); +#261856 = CARTESIAN_POINT('',(163.912254,-130.775,-5.E-02)); +#261857 = CIRCLE('',#261858,0.187254); +#261858 = AXIS2_PLACEMENT_3D('',#261859,#261860,#261861); +#261859 = CARTESIAN_POINT('',(163.725,-130.775,-5.E-02)); +#261860 = DIRECTION('',(0.,0.,1.)); +#261861 = DIRECTION('',(1.,0.,-0.)); +#261862 = FACE_BOUND('',#261863,.T.); +#261863 = EDGE_LOOP('',(#261864)); +#261864 = ORIENTED_EDGE('',*,*,#261865,.T.); +#261865 = EDGE_CURVE('',#261866,#261866,#261868,.T.); +#261866 = VERTEX_POINT('',#261867); +#261867 = CARTESIAN_POINT('',(164.762254,-130.775,-5.E-02)); +#261868 = CIRCLE('',#261869,0.187254); +#261869 = AXIS2_PLACEMENT_3D('',#261870,#261871,#261872); +#261870 = CARTESIAN_POINT('',(164.575,-130.775,-5.E-02)); +#261871 = DIRECTION('',(0.,0.,1.)); +#261872 = DIRECTION('',(1.,0.,-0.)); +#261873 = FACE_BOUND('',#261874,.T.); +#261874 = EDGE_LOOP('',(#261875)); +#261875 = ORIENTED_EDGE('',*,*,#261876,.T.); +#261876 = EDGE_CURVE('',#261877,#261877,#261879,.T.); +#261877 = VERTEX_POINT('',#261878); +#261878 = CARTESIAN_POINT('',(165.612254,-130.775,-5.E-02)); +#261879 = CIRCLE('',#261880,0.187254); +#261880 = AXIS2_PLACEMENT_3D('',#261881,#261882,#261883); +#261881 = CARTESIAN_POINT('',(165.425,-130.775,-5.E-02)); +#261882 = DIRECTION('',(0.,0.,1.)); +#261883 = DIRECTION('',(1.,0.,-0.)); +#261884 = FACE_BOUND('',#261885,.T.); +#261885 = EDGE_LOOP('',(#261886)); +#261886 = ORIENTED_EDGE('',*,*,#261887,.T.); +#261887 = EDGE_CURVE('',#261888,#261888,#261890,.T.); +#261888 = VERTEX_POINT('',#261889); +#261889 = CARTESIAN_POINT('',(166.462254,-130.775,-5.E-02)); +#261890 = CIRCLE('',#261891,0.187254); +#261891 = AXIS2_PLACEMENT_3D('',#261892,#261893,#261894); +#261892 = CARTESIAN_POINT('',(166.275,-130.775,-5.E-02)); +#261893 = DIRECTION('',(0.,0.,1.)); +#261894 = DIRECTION('',(1.,0.,-0.)); +#261895 = FACE_BOUND('',#261896,.T.); +#261896 = EDGE_LOOP('',(#261897)); +#261897 = ORIENTED_EDGE('',*,*,#261898,.T.); +#261898 = EDGE_CURVE('',#261899,#261899,#261901,.T.); +#261899 = VERTEX_POINT('',#261900); +#261900 = CARTESIAN_POINT('',(167.312254,-130.775,-5.E-02)); +#261901 = CIRCLE('',#261902,0.187254); +#261902 = AXIS2_PLACEMENT_3D('',#261903,#261904,#261905); +#261903 = CARTESIAN_POINT('',(167.125,-130.775,-5.E-02)); +#261904 = DIRECTION('',(0.,0.,1.)); +#261905 = DIRECTION('',(1.,0.,-0.)); +#261906 = FACE_BOUND('',#261907,.T.); +#261907 = EDGE_LOOP('',(#261908)); +#261908 = ORIENTED_EDGE('',*,*,#261909,.T.); +#261909 = EDGE_CURVE('',#261910,#261910,#261912,.T.); +#261910 = VERTEX_POINT('',#261911); +#261911 = CARTESIAN_POINT('',(115.739042,-129.5831,-5.E-02)); +#261912 = CIRCLE('',#261913,0.487392); +#261913 = AXIS2_PLACEMENT_3D('',#261914,#261915,#261916); +#261914 = CARTESIAN_POINT('',(115.25165,-129.5831,-5.E-02)); +#261915 = DIRECTION('',(0.,0.,1.)); +#261916 = DIRECTION('',(1.,0.,-0.)); +#261917 = FACE_BOUND('',#261918,.T.); +#261918 = EDGE_LOOP('',(#261919)); +#261919 = ORIENTED_EDGE('',*,*,#261920,.T.); +#261920 = EDGE_CURVE('',#261921,#261921,#261923,.T.); +#261921 = VERTEX_POINT('',#261922); +#261922 = CARTESIAN_POINT('',(118.279042,-129.5831,-5.E-02)); +#261923 = CIRCLE('',#261924,0.487392); +#261924 = AXIS2_PLACEMENT_3D('',#261925,#261926,#261927); +#261925 = CARTESIAN_POINT('',(117.79165,-129.5831,-5.E-02)); +#261926 = DIRECTION('',(0.,0.,1.)); +#261927 = DIRECTION('',(1.,0.,-0.)); +#261928 = FACE_BOUND('',#261929,.T.); +#261929 = EDGE_LOOP('',(#261930)); +#261930 = ORIENTED_EDGE('',*,*,#261931,.T.); +#261931 = EDGE_CURVE('',#261932,#261932,#261934,.T.); +#261932 = VERTEX_POINT('',#261933); +#261933 = CARTESIAN_POINT('',(120.819042,-129.5831,-5.E-02)); +#261934 = CIRCLE('',#261935,0.487392); +#261935 = AXIS2_PLACEMENT_3D('',#261936,#261937,#261938); +#261936 = CARTESIAN_POINT('',(120.33165,-129.5831,-5.E-02)); +#261937 = DIRECTION('',(0.,0.,1.)); +#261938 = DIRECTION('',(1.,0.,-0.)); +#261939 = FACE_BOUND('',#261940,.T.); +#261940 = EDGE_LOOP('',(#261941)); +#261941 = ORIENTED_EDGE('',*,*,#261942,.T.); +#261942 = EDGE_CURVE('',#261943,#261943,#261945,.T.); +#261943 = VERTEX_POINT('',#261944); +#261944 = CARTESIAN_POINT('',(123.359042,-129.5831,-5.E-02)); +#261945 = CIRCLE('',#261946,0.487392); +#261946 = AXIS2_PLACEMENT_3D('',#261947,#261948,#261949); +#261947 = CARTESIAN_POINT('',(122.87165,-129.5831,-5.E-02)); +#261948 = DIRECTION('',(0.,0.,1.)); +#261949 = DIRECTION('',(1.,0.,-0.)); +#261950 = FACE_BOUND('',#261951,.T.); +#261951 = EDGE_LOOP('',(#261952)); +#261952 = ORIENTED_EDGE('',*,*,#261953,.T.); +#261953 = EDGE_CURVE('',#261954,#261954,#261956,.T.); +#261954 = VERTEX_POINT('',#261955); +#261955 = CARTESIAN_POINT('',(125.899042,-129.5831,-5.E-02)); +#261956 = CIRCLE('',#261957,0.487392); +#261957 = AXIS2_PLACEMENT_3D('',#261958,#261959,#261960); +#261958 = CARTESIAN_POINT('',(125.41165,-129.5831,-5.E-02)); +#261959 = DIRECTION('',(0.,0.,1.)); +#261960 = DIRECTION('',(1.,0.,-0.)); +#261961 = FACE_BOUND('',#261962,.T.); +#261962 = EDGE_LOOP('',(#261963)); +#261963 = ORIENTED_EDGE('',*,*,#261964,.T.); +#261964 = EDGE_CURVE('',#261965,#261965,#261967,.T.); +#261965 = VERTEX_POINT('',#261966); +#261966 = CARTESIAN_POINT('',(128.439042,-129.5831,-5.E-02)); +#261967 = CIRCLE('',#261968,0.487392); +#261968 = AXIS2_PLACEMENT_3D('',#261969,#261970,#261971); +#261969 = CARTESIAN_POINT('',(127.95165,-129.5831,-5.E-02)); +#261970 = DIRECTION('',(0.,0.,1.)); +#261971 = DIRECTION('',(1.,0.,-0.)); +#261972 = FACE_BOUND('',#261973,.T.); +#261973 = EDGE_LOOP('',(#261974)); +#261974 = ORIENTED_EDGE('',*,*,#261975,.T.); +#261975 = EDGE_CURVE('',#261976,#261976,#261978,.T.); +#261976 = VERTEX_POINT('',#261977); +#261977 = CARTESIAN_POINT('',(130.979042,-129.5831,-5.E-02)); +#261978 = CIRCLE('',#261979,0.487392); +#261979 = AXIS2_PLACEMENT_3D('',#261980,#261981,#261982); +#261980 = CARTESIAN_POINT('',(130.49165,-129.5831,-5.E-02)); +#261981 = DIRECTION('',(0.,0.,1.)); +#261982 = DIRECTION('',(1.,0.,-0.)); +#261983 = FACE_BOUND('',#261984,.T.); +#261984 = EDGE_LOOP('',(#261985)); +#261985 = ORIENTED_EDGE('',*,*,#261986,.T.); +#261986 = EDGE_CURVE('',#261987,#261987,#261989,.T.); +#261987 = VERTEX_POINT('',#261988); +#261988 = CARTESIAN_POINT('',(133.519042,-129.5831,-5.E-02)); +#261989 = CIRCLE('',#261990,0.487392); +#261990 = AXIS2_PLACEMENT_3D('',#261991,#261992,#261993); +#261991 = CARTESIAN_POINT('',(133.03165,-129.5831,-5.E-02)); +#261992 = DIRECTION('',(0.,0.,1.)); +#261993 = DIRECTION('',(1.,0.,-0.)); +#261994 = FACE_BOUND('',#261995,.T.); +#261995 = EDGE_LOOP('',(#261996)); +#261996 = ORIENTED_EDGE('',*,*,#261997,.T.); +#261997 = EDGE_CURVE('',#261998,#261998,#262000,.T.); +#261998 = VERTEX_POINT('',#261999); +#261999 = CARTESIAN_POINT('',(138.599042,-129.5831,-5.E-02)); +#262000 = CIRCLE('',#262001,0.487392); +#262001 = AXIS2_PLACEMENT_3D('',#262002,#262003,#262004); +#262002 = CARTESIAN_POINT('',(138.11165,-129.5831,-5.E-02)); +#262003 = DIRECTION('',(0.,0.,1.)); +#262004 = DIRECTION('',(1.,0.,-0.)); +#262005 = FACE_BOUND('',#262006,.T.); +#262006 = EDGE_LOOP('',(#262007)); +#262007 = ORIENTED_EDGE('',*,*,#262008,.T.); +#262008 = EDGE_CURVE('',#262009,#262009,#262011,.T.); +#262009 = VERTEX_POINT('',#262010); +#262010 = CARTESIAN_POINT('',(141.139042,-129.5831,-5.E-02)); +#262011 = CIRCLE('',#262012,0.487392); +#262012 = AXIS2_PLACEMENT_3D('',#262013,#262014,#262015); +#262013 = CARTESIAN_POINT('',(140.65165,-129.5831,-5.E-02)); +#262014 = DIRECTION('',(0.,0.,1.)); +#262015 = DIRECTION('',(1.,0.,-0.)); +#262016 = FACE_BOUND('',#262017,.T.); +#262017 = EDGE_LOOP('',(#262018)); +#262018 = ORIENTED_EDGE('',*,*,#262019,.T.); +#262019 = EDGE_CURVE('',#262020,#262020,#262022,.T.); +#262020 = VERTEX_POINT('',#262021); +#262021 = CARTESIAN_POINT('',(143.679042,-129.5831,-5.E-02)); +#262022 = CIRCLE('',#262023,0.487392); +#262023 = AXIS2_PLACEMENT_3D('',#262024,#262025,#262026); +#262024 = CARTESIAN_POINT('',(143.19165,-129.5831,-5.E-02)); +#262025 = DIRECTION('',(0.,0.,1.)); +#262026 = DIRECTION('',(1.,0.,-0.)); +#262027 = FACE_BOUND('',#262028,.T.); +#262028 = EDGE_LOOP('',(#262029)); +#262029 = ORIENTED_EDGE('',*,*,#262030,.T.); +#262030 = EDGE_CURVE('',#262031,#262031,#262033,.T.); +#262031 = VERTEX_POINT('',#262032); +#262032 = CARTESIAN_POINT('',(146.219042,-129.5831,-5.E-02)); +#262033 = CIRCLE('',#262034,0.487392); +#262034 = AXIS2_PLACEMENT_3D('',#262035,#262036,#262037); +#262035 = CARTESIAN_POINT('',(145.73165,-129.5831,-5.E-02)); +#262036 = DIRECTION('',(0.,0.,1.)); +#262037 = DIRECTION('',(1.,0.,-0.)); +#262038 = FACE_BOUND('',#262039,.T.); +#262039 = EDGE_LOOP('',(#262040)); +#262040 = ORIENTED_EDGE('',*,*,#262041,.T.); +#262041 = EDGE_CURVE('',#262042,#262042,#262044,.T.); +#262042 = VERTEX_POINT('',#262043); +#262043 = CARTESIAN_POINT('',(148.759042,-129.5831,-5.E-02)); +#262044 = CIRCLE('',#262045,0.487392); +#262045 = AXIS2_PLACEMENT_3D('',#262046,#262047,#262048); +#262046 = CARTESIAN_POINT('',(148.27165,-129.5831,-5.E-02)); +#262047 = DIRECTION('',(0.,0.,1.)); +#262048 = DIRECTION('',(1.,0.,-0.)); +#262049 = FACE_BOUND('',#262050,.T.); +#262050 = EDGE_LOOP('',(#262051)); +#262051 = ORIENTED_EDGE('',*,*,#262052,.T.); +#262052 = EDGE_CURVE('',#262053,#262053,#262055,.T.); +#262053 = VERTEX_POINT('',#262054); +#262054 = CARTESIAN_POINT('',(151.299042,-129.5831,-5.E-02)); +#262055 = CIRCLE('',#262056,0.487392); +#262056 = AXIS2_PLACEMENT_3D('',#262057,#262058,#262059); +#262057 = CARTESIAN_POINT('',(150.81165,-129.5831,-5.E-02)); +#262058 = DIRECTION('',(0.,0.,1.)); +#262059 = DIRECTION('',(1.,0.,-0.)); +#262060 = FACE_BOUND('',#262061,.T.); +#262061 = EDGE_LOOP('',(#262062)); +#262062 = ORIENTED_EDGE('',*,*,#262063,.T.); +#262063 = EDGE_CURVE('',#262064,#262064,#262066,.T.); +#262064 = VERTEX_POINT('',#262065); +#262065 = CARTESIAN_POINT('',(161.362254,-129.425,-5.E-02)); +#262066 = CIRCLE('',#262067,0.187254); +#262067 = AXIS2_PLACEMENT_3D('',#262068,#262069,#262070); +#262068 = CARTESIAN_POINT('',(161.175,-129.425,-5.E-02)); +#262069 = DIRECTION('',(0.,0.,1.)); +#262070 = DIRECTION('',(1.,0.,-0.)); +#262071 = FACE_BOUND('',#262072,.T.); +#262072 = EDGE_LOOP('',(#262073)); +#262073 = ORIENTED_EDGE('',*,*,#262074,.T.); +#262074 = EDGE_CURVE('',#262075,#262075,#262077,.T.); +#262075 = VERTEX_POINT('',#262076); +#262076 = CARTESIAN_POINT('',(162.212254,-129.425,-5.E-02)); +#262077 = CIRCLE('',#262078,0.187254); +#262078 = AXIS2_PLACEMENT_3D('',#262079,#262080,#262081); +#262079 = CARTESIAN_POINT('',(162.025,-129.425,-5.E-02)); +#262080 = DIRECTION('',(0.,0.,1.)); +#262081 = DIRECTION('',(1.,0.,-0.)); +#262082 = FACE_BOUND('',#262083,.T.); +#262083 = EDGE_LOOP('',(#262084)); +#262084 = ORIENTED_EDGE('',*,*,#262085,.T.); +#262085 = EDGE_CURVE('',#262086,#262086,#262088,.T.); +#262086 = VERTEX_POINT('',#262087); +#262087 = CARTESIAN_POINT('',(163.062254,-129.425,-5.E-02)); +#262088 = CIRCLE('',#262089,0.187254); +#262089 = AXIS2_PLACEMENT_3D('',#262090,#262091,#262092); +#262090 = CARTESIAN_POINT('',(162.875,-129.425,-5.E-02)); +#262091 = DIRECTION('',(0.,0.,1.)); +#262092 = DIRECTION('',(1.,0.,-0.)); +#262093 = FACE_BOUND('',#262094,.T.); +#262094 = EDGE_LOOP('',(#262095)); +#262095 = ORIENTED_EDGE('',*,*,#262096,.T.); +#262096 = EDGE_CURVE('',#262097,#262097,#262099,.T.); +#262097 = VERTEX_POINT('',#262098); +#262098 = CARTESIAN_POINT('',(163.912254,-129.425,-5.E-02)); +#262099 = CIRCLE('',#262100,0.187254); +#262100 = AXIS2_PLACEMENT_3D('',#262101,#262102,#262103); +#262101 = CARTESIAN_POINT('',(163.725,-129.425,-5.E-02)); +#262102 = DIRECTION('',(0.,0.,1.)); +#262103 = DIRECTION('',(1.,0.,-0.)); +#262104 = FACE_BOUND('',#262105,.T.); +#262105 = EDGE_LOOP('',(#262106)); +#262106 = ORIENTED_EDGE('',*,*,#262107,.T.); +#262107 = EDGE_CURVE('',#262108,#262108,#262110,.T.); +#262108 = VERTEX_POINT('',#262109); +#262109 = CARTESIAN_POINT('',(164.762254,-129.425,-5.E-02)); +#262110 = CIRCLE('',#262111,0.187254); +#262111 = AXIS2_PLACEMENT_3D('',#262112,#262113,#262114); +#262112 = CARTESIAN_POINT('',(164.575,-129.425,-5.E-02)); +#262113 = DIRECTION('',(0.,0.,1.)); +#262114 = DIRECTION('',(1.,0.,-0.)); +#262115 = FACE_BOUND('',#262116,.T.); +#262116 = EDGE_LOOP('',(#262117)); +#262117 = ORIENTED_EDGE('',*,*,#262118,.T.); +#262118 = EDGE_CURVE('',#262119,#262119,#262121,.T.); +#262119 = VERTEX_POINT('',#262120); +#262120 = CARTESIAN_POINT('',(165.612254,-129.425,-5.E-02)); +#262121 = CIRCLE('',#262122,0.187254); +#262122 = AXIS2_PLACEMENT_3D('',#262123,#262124,#262125); +#262123 = CARTESIAN_POINT('',(165.425,-129.425,-5.E-02)); +#262124 = DIRECTION('',(0.,0.,1.)); +#262125 = DIRECTION('',(1.,0.,-0.)); +#262126 = FACE_BOUND('',#262127,.T.); +#262127 = EDGE_LOOP('',(#262128)); +#262128 = ORIENTED_EDGE('',*,*,#262129,.T.); +#262129 = EDGE_CURVE('',#262130,#262130,#262132,.T.); +#262130 = VERTEX_POINT('',#262131); +#262131 = CARTESIAN_POINT('',(166.462254,-129.425,-5.E-02)); +#262132 = CIRCLE('',#262133,0.187254); +#262133 = AXIS2_PLACEMENT_3D('',#262134,#262135,#262136); +#262134 = CARTESIAN_POINT('',(166.275,-129.425,-5.E-02)); +#262135 = DIRECTION('',(0.,0.,1.)); +#262136 = DIRECTION('',(1.,0.,-0.)); +#262137 = FACE_BOUND('',#262138,.T.); +#262138 = EDGE_LOOP('',(#262139)); +#262139 = ORIENTED_EDGE('',*,*,#262140,.T.); +#262140 = EDGE_CURVE('',#262141,#262141,#262143,.T.); +#262141 = VERTEX_POINT('',#262142); +#262142 = CARTESIAN_POINT('',(167.312254,-129.425,-5.E-02)); +#262143 = CIRCLE('',#262144,0.187254); +#262144 = AXIS2_PLACEMENT_3D('',#262145,#262146,#262147); +#262145 = CARTESIAN_POINT('',(167.125,-129.425,-5.E-02)); +#262146 = DIRECTION('',(0.,0.,1.)); +#262147 = DIRECTION('',(1.,0.,-0.)); +#262148 = FACE_BOUND('',#262149,.T.); +#262149 = EDGE_LOOP('',(#262150)); +#262150 = ORIENTED_EDGE('',*,*,#262151,.T.); +#262151 = EDGE_CURVE('',#262152,#262152,#262154,.T.); +#262152 = VERTEX_POINT('',#262153); +#262153 = CARTESIAN_POINT('',(210.679042,-121.3231,-5.E-02)); +#262154 = CIRCLE('',#262155,0.487392); +#262155 = AXIS2_PLACEMENT_3D('',#262156,#262157,#262158); +#262156 = CARTESIAN_POINT('',(210.19165,-121.3231,-5.E-02)); +#262157 = DIRECTION('',(0.,0.,1.)); +#262158 = DIRECTION('',(1.,0.,-0.)); +#262159 = FACE_BOUND('',#262160,.T.); +#262160 = EDGE_LOOP('',(#262161)); +#262161 = ORIENTED_EDGE('',*,*,#262162,.T.); +#262162 = EDGE_CURVE('',#262163,#262163,#262165,.T.); +#262163 = VERTEX_POINT('',#262164); +#262164 = CARTESIAN_POINT('',(210.679042,-118.8231,-5.E-02)); +#262165 = CIRCLE('',#262166,0.487392); +#262166 = AXIS2_PLACEMENT_3D('',#262167,#262168,#262169); +#262167 = CARTESIAN_POINT('',(210.19165,-118.8231,-5.E-02)); +#262168 = DIRECTION('',(0.,0.,1.)); +#262169 = DIRECTION('',(1.,0.,-0.)); +#262170 = FACE_BOUND('',#262171,.T.); +#262171 = EDGE_LOOP('',(#262172)); +#262172 = ORIENTED_EDGE('',*,*,#262173,.T.); +#262173 = EDGE_CURVE('',#262174,#262174,#262176,.T.); +#262174 = VERTEX_POINT('',#262175); +#262175 = CARTESIAN_POINT('',(210.654042,-108.3231,-5.E-02)); +#262176 = CIRCLE('',#262177,0.462392); +#262177 = AXIS2_PLACEMENT_3D('',#262178,#262179,#262180); +#262178 = CARTESIAN_POINT('',(210.19165,-108.3231,-5.E-02)); +#262179 = DIRECTION('',(0.,0.,1.)); +#262180 = DIRECTION('',(1.,0.,-0.)); +#262181 = FACE_BOUND('',#262182,.T.); +#262182 = EDGE_LOOP('',(#262183)); +#262183 = ORIENTED_EDGE('',*,*,#262184,.T.); +#262184 = EDGE_CURVE('',#262185,#262185,#262187,.T.); +#262185 = VERTEX_POINT('',#262186); +#262186 = CARTESIAN_POINT('',(210.654042,-105.8231,-5.E-02)); +#262187 = CIRCLE('',#262188,0.462392); +#262188 = AXIS2_PLACEMENT_3D('',#262189,#262190,#262191); +#262189 = CARTESIAN_POINT('',(210.19165,-105.8231,-5.E-02)); +#262190 = DIRECTION('',(0.,0.,1.)); +#262191 = DIRECTION('',(1.,0.,-0.)); +#262192 = FACE_BOUND('',#262193,.T.); +#262193 = EDGE_LOOP('',(#262194)); +#262194 = ORIENTED_EDGE('',*,*,#262195,.T.); +#262195 = EDGE_CURVE('',#262196,#262196,#262198,.T.); +#262196 = VERTEX_POINT('',#262197); +#262197 = CARTESIAN_POINT('',(210.654042,-103.3231,-5.E-02)); +#262198 = CIRCLE('',#262199,0.462392); +#262199 = AXIS2_PLACEMENT_3D('',#262200,#262201,#262202); +#262200 = CARTESIAN_POINT('',(210.19165,-103.3231,-5.E-02)); +#262201 = DIRECTION('',(0.,0.,1.)); +#262202 = DIRECTION('',(1.,0.,-0.)); +#262203 = FACE_BOUND('',#262204,.T.); +#262204 = EDGE_LOOP('',(#262205)); +#262205 = ORIENTED_EDGE('',*,*,#262206,.T.); +#262206 = EDGE_CURVE('',#262207,#262207,#262209,.T.); +#262207 = VERTEX_POINT('',#262208); +#262208 = CARTESIAN_POINT('',(210.654042,-95.3231,-5.E-02)); +#262209 = CIRCLE('',#262210,0.462392); +#262210 = AXIS2_PLACEMENT_3D('',#262211,#262212,#262213); +#262211 = CARTESIAN_POINT('',(210.19165,-95.3231,-5.E-02)); +#262212 = DIRECTION('',(0.,0.,1.)); +#262213 = DIRECTION('',(1.,0.,-0.)); +#262214 = FACE_BOUND('',#262215,.T.); +#262215 = EDGE_LOOP('',(#262216)); +#262216 = ORIENTED_EDGE('',*,*,#262217,.T.); +#262217 = EDGE_CURVE('',#262218,#262218,#262220,.T.); +#262218 = VERTEX_POINT('',#262219); +#262219 = CARTESIAN_POINT('',(210.654042,-92.8231,-5.E-02)); +#262220 = CIRCLE('',#262221,0.462392); +#262221 = AXIS2_PLACEMENT_3D('',#262222,#262223,#262224); +#262222 = CARTESIAN_POINT('',(210.19165,-92.8231,-5.E-02)); +#262223 = DIRECTION('',(0.,0.,1.)); +#262224 = DIRECTION('',(1.,0.,-0.)); +#262225 = FACE_BOUND('',#262226,.T.); +#262226 = EDGE_LOOP('',(#262227)); +#262227 = ORIENTED_EDGE('',*,*,#262228,.T.); +#262228 = EDGE_CURVE('',#262229,#262229,#262231,.T.); +#262229 = VERTEX_POINT('',#262230); +#262230 = CARTESIAN_POINT('',(174.579042,-92.8231,-5.E-02)); +#262231 = CIRCLE('',#262232,0.387392); +#262232 = AXIS2_PLACEMENT_3D('',#262233,#262234,#262235); +#262233 = CARTESIAN_POINT('',(174.19165,-92.8231,-5.E-02)); +#262234 = DIRECTION('',(0.,0.,1.)); +#262235 = DIRECTION('',(1.,0.,-0.)); +#262236 = FACE_BOUND('',#262237,.T.); +#262237 = EDGE_LOOP('',(#262238)); +#262238 = ORIENTED_EDGE('',*,*,#262239,.T.); +#262239 = EDGE_CURVE('',#262240,#262240,#262242,.T.); +#262240 = VERTEX_POINT('',#262241); +#262241 = CARTESIAN_POINT('',(196.929042,-92.8231,-5.E-02)); +#262242 = CIRCLE('',#262243,0.387392); +#262243 = AXIS2_PLACEMENT_3D('',#262244,#262245,#262246); +#262244 = CARTESIAN_POINT('',(196.54165,-92.8231,-5.E-02)); +#262245 = DIRECTION('',(0.,0.,1.)); +#262246 = DIRECTION('',(1.,0.,-0.)); +#262247 = FACE_BOUND('',#262248,.T.); +#262248 = EDGE_LOOP('',(#262249)); +#262249 = ORIENTED_EDGE('',*,*,#262250,.T.); +#262250 = EDGE_CURVE('',#262251,#262251,#262253,.T.); +#262251 = VERTEX_POINT('',#262252); +#262252 = CARTESIAN_POINT('',(174.579042,-90.8231,-5.E-02)); +#262253 = CIRCLE('',#262254,0.387392); +#262254 = AXIS2_PLACEMENT_3D('',#262255,#262256,#262257); +#262255 = CARTESIAN_POINT('',(174.19165,-90.8231,-5.E-02)); +#262256 = DIRECTION('',(0.,0.,1.)); +#262257 = DIRECTION('',(1.,0.,-0.)); +#262258 = FACE_BOUND('',#262259,.T.); +#262259 = EDGE_LOOP('',(#262260)); +#262260 = ORIENTED_EDGE('',*,*,#262261,.T.); +#262261 = EDGE_CURVE('',#262262,#262262,#262264,.T.); +#262262 = VERTEX_POINT('',#262263); +#262263 = CARTESIAN_POINT('',(196.929042,-90.8231,-5.E-02)); +#262264 = CIRCLE('',#262265,0.387392); +#262265 = AXIS2_PLACEMENT_3D('',#262266,#262267,#262268); +#262266 = CARTESIAN_POINT('',(196.54165,-90.8231,-5.E-02)); +#262267 = DIRECTION('',(0.,0.,1.)); +#262268 = DIRECTION('',(1.,0.,-0.)); +#262269 = FACE_BOUND('',#262270,.T.); +#262270 = EDGE_LOOP('',(#262271)); +#262271 = ORIENTED_EDGE('',*,*,#262272,.T.); +#262272 = EDGE_CURVE('',#262273,#262273,#262275,.T.); +#262273 = VERTEX_POINT('',#262274); +#262274 = CARTESIAN_POINT('',(210.654042,-90.3231,-5.E-02)); +#262275 = CIRCLE('',#262276,0.462392); +#262276 = AXIS2_PLACEMENT_3D('',#262277,#262278,#262279); +#262277 = CARTESIAN_POINT('',(210.19165,-90.3231,-5.E-02)); +#262278 = DIRECTION('',(0.,0.,1.)); +#262279 = DIRECTION('',(1.,0.,-0.)); +#262280 = FACE_BOUND('',#262281,.T.); +#262281 = EDGE_LOOP('',(#262282)); +#262282 = ORIENTED_EDGE('',*,*,#262283,.T.); +#262283 = EDGE_CURVE('',#262284,#262284,#262286,.T.); +#262284 = VERTEX_POINT('',#262285); +#262285 = CARTESIAN_POINT('',(174.579042,-88.8231,-5.E-02)); +#262286 = CIRCLE('',#262287,0.387392); +#262287 = AXIS2_PLACEMENT_3D('',#262288,#262289,#262290); +#262288 = CARTESIAN_POINT('',(174.19165,-88.8231,-5.E-02)); +#262289 = DIRECTION('',(0.,0.,1.)); +#262290 = DIRECTION('',(1.,0.,-0.)); +#262291 = FACE_BOUND('',#262292,.T.); +#262292 = EDGE_LOOP('',(#262293)); +#262293 = ORIENTED_EDGE('',*,*,#262294,.T.); +#262294 = EDGE_CURVE('',#262295,#262295,#262297,.T.); +#262295 = VERTEX_POINT('',#262296); +#262296 = CARTESIAN_POINT('',(196.929042,-88.8231,-5.E-02)); +#262297 = CIRCLE('',#262298,0.387392); +#262298 = AXIS2_PLACEMENT_3D('',#262299,#262300,#262301); +#262299 = CARTESIAN_POINT('',(196.54165,-88.8231,-5.E-02)); +#262300 = DIRECTION('',(0.,0.,1.)); +#262301 = DIRECTION('',(1.,0.,-0.)); +#262302 = FACE_BOUND('',#262303,.T.); +#262303 = EDGE_LOOP('',(#262304)); +#262304 = ORIENTED_EDGE('',*,*,#262305,.T.); +#262305 = EDGE_CURVE('',#262306,#262306,#262308,.T.); +#262306 = VERTEX_POINT('',#262307); +#262307 = CARTESIAN_POINT('',(210.654042,-87.8231,-5.E-02)); +#262308 = CIRCLE('',#262309,0.462392); +#262309 = AXIS2_PLACEMENT_3D('',#262310,#262311,#262312); +#262310 = CARTESIAN_POINT('',(210.19165,-87.8231,-5.E-02)); +#262311 = DIRECTION('',(0.,0.,1.)); +#262312 = DIRECTION('',(1.,0.,-0.)); +#262313 = FACE_BOUND('',#262314,.T.); +#262314 = EDGE_LOOP('',(#262315)); +#262315 = ORIENTED_EDGE('',*,*,#262316,.T.); +#262316 = EDGE_CURVE('',#262317,#262317,#262319,.T.); +#262317 = VERTEX_POINT('',#262318); +#262318 = CARTESIAN_POINT('',(174.579042,-86.8231,-5.E-02)); +#262319 = CIRCLE('',#262320,0.387392); +#262320 = AXIS2_PLACEMENT_3D('',#262321,#262322,#262323); +#262321 = CARTESIAN_POINT('',(174.19165,-86.8231,-5.E-02)); +#262322 = DIRECTION('',(0.,0.,1.)); +#262323 = DIRECTION('',(1.,0.,-0.)); +#262324 = FACE_BOUND('',#262325,.T.); +#262325 = EDGE_LOOP('',(#262326)); +#262326 = ORIENTED_EDGE('',*,*,#262327,.T.); +#262327 = EDGE_CURVE('',#262328,#262328,#262330,.T.); +#262328 = VERTEX_POINT('',#262329); +#262329 = CARTESIAN_POINT('',(196.929042,-86.8231,-5.E-02)); +#262330 = CIRCLE('',#262331,0.387392); +#262331 = AXIS2_PLACEMENT_3D('',#262332,#262333,#262334); +#262332 = CARTESIAN_POINT('',(196.54165,-86.8231,-5.E-02)); +#262333 = DIRECTION('',(0.,0.,1.)); +#262334 = DIRECTION('',(1.,0.,-0.)); +#262335 = FACE_BOUND('',#262336,.T.); +#262336 = EDGE_LOOP('',(#262337)); +#262337 = ORIENTED_EDGE('',*,*,#262338,.T.); +#262338 = EDGE_CURVE('',#262339,#262339,#262341,.T.); +#262339 = VERTEX_POINT('',#262340); +#262340 = CARTESIAN_POINT('',(174.579042,-84.8231,-5.E-02)); +#262341 = CIRCLE('',#262342,0.387392); +#262342 = AXIS2_PLACEMENT_3D('',#262343,#262344,#262345); +#262343 = CARTESIAN_POINT('',(174.19165,-84.8231,-5.E-02)); +#262344 = DIRECTION('',(0.,0.,1.)); +#262345 = DIRECTION('',(1.,0.,-0.)); +#262346 = FACE_BOUND('',#262347,.T.); +#262347 = EDGE_LOOP('',(#262348)); +#262348 = ORIENTED_EDGE('',*,*,#262349,.T.); +#262349 = EDGE_CURVE('',#262350,#262350,#262352,.T.); +#262350 = VERTEX_POINT('',#262351); +#262351 = CARTESIAN_POINT('',(196.929042,-84.8231,-5.E-02)); +#262352 = CIRCLE('',#262353,0.387392); +#262353 = AXIS2_PLACEMENT_3D('',#262354,#262355,#262356); +#262354 = CARTESIAN_POINT('',(196.54165,-84.8231,-5.E-02)); +#262355 = DIRECTION('',(0.,0.,1.)); +#262356 = DIRECTION('',(1.,0.,-0.)); +#262357 = FACE_BOUND('',#262358,.T.); +#262358 = EDGE_LOOP('',(#262359)); +#262359 = ORIENTED_EDGE('',*,*,#262360,.T.); +#262360 = EDGE_CURVE('',#262361,#262361,#262363,.T.); +#262361 = VERTEX_POINT('',#262362); +#262362 = CARTESIAN_POINT('',(174.579042,-82.8231,-5.E-02)); +#262363 = CIRCLE('',#262364,0.387392); +#262364 = AXIS2_PLACEMENT_3D('',#262365,#262366,#262367); +#262365 = CARTESIAN_POINT('',(174.19165,-82.8231,-5.E-02)); +#262366 = DIRECTION('',(0.,0.,1.)); +#262367 = DIRECTION('',(1.,0.,-0.)); +#262368 = FACE_BOUND('',#262369,.T.); +#262369 = EDGE_LOOP('',(#262370)); +#262370 = ORIENTED_EDGE('',*,*,#262371,.T.); +#262371 = EDGE_CURVE('',#262372,#262372,#262374,.T.); +#262372 = VERTEX_POINT('',#262373); +#262373 = CARTESIAN_POINT('',(196.929042,-82.8231,-5.E-02)); +#262374 = CIRCLE('',#262375,0.387392); +#262375 = AXIS2_PLACEMENT_3D('',#262376,#262377,#262378); +#262376 = CARTESIAN_POINT('',(196.54165,-82.8231,-5.E-02)); +#262377 = DIRECTION('',(0.,0.,1.)); +#262378 = DIRECTION('',(1.,0.,-0.)); +#262379 = FACE_BOUND('',#262380,.T.); +#262380 = EDGE_LOOP('',(#262381)); +#262381 = ORIENTED_EDGE('',*,*,#262382,.T.); +#262382 = EDGE_CURVE('',#262383,#262383,#262385,.T.); +#262383 = VERTEX_POINT('',#262384); +#262384 = CARTESIAN_POINT('',(106.599042,-81.3231,-5.E-02)); +#262385 = CIRCLE('',#262386,0.487392); +#262386 = AXIS2_PLACEMENT_3D('',#262387,#262388,#262389); +#262387 = CARTESIAN_POINT('',(106.11165,-81.3231,-5.E-02)); +#262388 = DIRECTION('',(0.,0.,1.)); +#262389 = DIRECTION('',(1.,0.,-0.)); +#262390 = FACE_BOUND('',#262391,.T.); +#262391 = EDGE_LOOP('',(#262392)); +#262392 = ORIENTED_EDGE('',*,*,#262393,.T.); +#262393 = EDGE_CURVE('',#262394,#262394,#262396,.T.); +#262394 = VERTEX_POINT('',#262395); +#262395 = CARTESIAN_POINT('',(109.139042,-81.3231,-5.E-02)); +#262396 = CIRCLE('',#262397,0.487392); +#262397 = AXIS2_PLACEMENT_3D('',#262398,#262399,#262400); +#262398 = CARTESIAN_POINT('',(108.65165,-81.3231,-5.E-02)); +#262399 = DIRECTION('',(0.,0.,1.)); +#262400 = DIRECTION('',(1.,0.,-0.)); +#262401 = FACE_BOUND('',#262402,.T.); +#262402 = EDGE_LOOP('',(#262403)); +#262403 = ORIENTED_EDGE('',*,*,#262404,.T.); +#262404 = EDGE_CURVE('',#262405,#262405,#262407,.T.); +#262405 = VERTEX_POINT('',#262406); +#262406 = CARTESIAN_POINT('',(111.679042,-81.3231,-5.E-02)); +#262407 = CIRCLE('',#262408,0.487392); +#262408 = AXIS2_PLACEMENT_3D('',#262409,#262410,#262411); +#262409 = CARTESIAN_POINT('',(111.19165,-81.3231,-5.E-02)); +#262410 = DIRECTION('',(0.,0.,1.)); +#262411 = DIRECTION('',(1.,0.,-0.)); +#262412 = FACE_BOUND('',#262413,.T.); +#262413 = EDGE_LOOP('',(#262414)); +#262414 = ORIENTED_EDGE('',*,*,#262415,.T.); +#262415 = EDGE_CURVE('',#262416,#262416,#262418,.T.); +#262416 = VERTEX_POINT('',#262417); +#262417 = CARTESIAN_POINT('',(114.219042,-81.3231,-5.E-02)); +#262418 = CIRCLE('',#262419,0.487392); +#262419 = AXIS2_PLACEMENT_3D('',#262420,#262421,#262422); +#262420 = CARTESIAN_POINT('',(113.73165,-81.3231,-5.E-02)); +#262421 = DIRECTION('',(0.,0.,1.)); +#262422 = DIRECTION('',(1.,0.,-0.)); +#262423 = FACE_BOUND('',#262424,.T.); +#262424 = EDGE_LOOP('',(#262425)); +#262425 = ORIENTED_EDGE('',*,*,#262426,.T.); +#262426 = EDGE_CURVE('',#262427,#262427,#262429,.T.); +#262427 = VERTEX_POINT('',#262428); +#262428 = CARTESIAN_POINT('',(116.759042,-81.3231,-5.E-02)); +#262429 = CIRCLE('',#262430,0.487392); +#262430 = AXIS2_PLACEMENT_3D('',#262431,#262432,#262433); +#262431 = CARTESIAN_POINT('',(116.27165,-81.3231,-5.E-02)); +#262432 = DIRECTION('',(0.,0.,1.)); +#262433 = DIRECTION('',(1.,0.,-0.)); +#262434 = FACE_BOUND('',#262435,.T.); +#262435 = EDGE_LOOP('',(#262436)); +#262436 = ORIENTED_EDGE('',*,*,#262437,.T.); +#262437 = EDGE_CURVE('',#262438,#262438,#262440,.T.); +#262438 = VERTEX_POINT('',#262439); +#262439 = CARTESIAN_POINT('',(119.299042,-81.3231,-5.E-02)); +#262440 = CIRCLE('',#262441,0.487392); +#262441 = AXIS2_PLACEMENT_3D('',#262442,#262443,#262444); +#262442 = CARTESIAN_POINT('',(118.81165,-81.3231,-5.E-02)); +#262443 = DIRECTION('',(0.,0.,1.)); +#262444 = DIRECTION('',(1.,0.,-0.)); +#262445 = FACE_BOUND('',#262446,.T.); +#262446 = EDGE_LOOP('',(#262447)); +#262447 = ORIENTED_EDGE('',*,*,#262448,.T.); +#262448 = EDGE_CURVE('',#262449,#262449,#262451,.T.); +#262449 = VERTEX_POINT('',#262450); +#262450 = CARTESIAN_POINT('',(121.839042,-81.3231,-5.E-02)); +#262451 = CIRCLE('',#262452,0.487392); +#262452 = AXIS2_PLACEMENT_3D('',#262453,#262454,#262455); +#262453 = CARTESIAN_POINT('',(121.35165,-81.3231,-5.E-02)); +#262454 = DIRECTION('',(0.,0.,1.)); +#262455 = DIRECTION('',(1.,0.,-0.)); +#262456 = FACE_BOUND('',#262457,.T.); +#262457 = EDGE_LOOP('',(#262458)); +#262458 = ORIENTED_EDGE('',*,*,#262459,.T.); +#262459 = EDGE_CURVE('',#262460,#262460,#262462,.T.); +#262460 = VERTEX_POINT('',#262461); +#262461 = CARTESIAN_POINT('',(124.379042,-81.3231,-5.E-02)); +#262462 = CIRCLE('',#262463,0.487392); +#262463 = AXIS2_PLACEMENT_3D('',#262464,#262465,#262466); +#262464 = CARTESIAN_POINT('',(123.89165,-81.3231,-5.E-02)); +#262465 = DIRECTION('',(0.,0.,1.)); +#262466 = DIRECTION('',(1.,0.,-0.)); +#262467 = FACE_BOUND('',#262468,.T.); +#262468 = EDGE_LOOP('',(#262469)); +#262469 = ORIENTED_EDGE('',*,*,#262470,.T.); +#262470 = EDGE_CURVE('',#262471,#262471,#262473,.T.); +#262471 = VERTEX_POINT('',#262472); +#262472 = CARTESIAN_POINT('',(126.919042,-81.3231,-5.E-02)); +#262473 = CIRCLE('',#262474,0.487392); +#262474 = AXIS2_PLACEMENT_3D('',#262475,#262476,#262477); +#262475 = CARTESIAN_POINT('',(126.43165,-81.3231,-5.E-02)); +#262476 = DIRECTION('',(0.,0.,1.)); +#262477 = DIRECTION('',(1.,0.,-0.)); +#262478 = FACE_BOUND('',#262479,.T.); +#262479 = EDGE_LOOP('',(#262480)); +#262480 = ORIENTED_EDGE('',*,*,#262481,.T.); +#262481 = EDGE_CURVE('',#262482,#262482,#262484,.T.); +#262482 = VERTEX_POINT('',#262483); +#262483 = CARTESIAN_POINT('',(129.459042,-81.3231,-5.E-02)); +#262484 = CIRCLE('',#262485,0.487392); +#262485 = AXIS2_PLACEMENT_3D('',#262486,#262487,#262488); +#262486 = CARTESIAN_POINT('',(128.97165,-81.3231,-5.E-02)); +#262487 = DIRECTION('',(0.,0.,1.)); +#262488 = DIRECTION('',(1.,0.,-0.)); +#262489 = FACE_BOUND('',#262490,.T.); +#262490 = EDGE_LOOP('',(#262491)); +#262491 = ORIENTED_EDGE('',*,*,#262492,.T.); +#262492 = EDGE_CURVE('',#262493,#262493,#262495,.T.); +#262493 = VERTEX_POINT('',#262494); +#262494 = CARTESIAN_POINT('',(133.519042,-81.3231,-5.E-02)); +#262495 = CIRCLE('',#262496,0.487392); +#262496 = AXIS2_PLACEMENT_3D('',#262497,#262498,#262499); +#262497 = CARTESIAN_POINT('',(133.03165,-81.3231,-5.E-02)); +#262498 = DIRECTION('',(0.,0.,1.)); +#262499 = DIRECTION('',(1.,0.,-0.)); +#262500 = FACE_BOUND('',#262501,.T.); +#262501 = EDGE_LOOP('',(#262502)); +#262502 = ORIENTED_EDGE('',*,*,#262503,.T.); +#262503 = EDGE_CURVE('',#262504,#262504,#262506,.T.); +#262504 = VERTEX_POINT('',#262505); +#262505 = CARTESIAN_POINT('',(136.059042,-81.3231,-5.E-02)); +#262506 = CIRCLE('',#262507,0.487392); +#262507 = AXIS2_PLACEMENT_3D('',#262508,#262509,#262510); +#262508 = CARTESIAN_POINT('',(135.57165,-81.3231,-5.E-02)); +#262509 = DIRECTION('',(0.,0.,1.)); +#262510 = DIRECTION('',(1.,0.,-0.)); +#262511 = FACE_BOUND('',#262512,.T.); +#262512 = EDGE_LOOP('',(#262513)); +#262513 = ORIENTED_EDGE('',*,*,#262514,.T.); +#262514 = EDGE_CURVE('',#262515,#262515,#262517,.T.); +#262515 = VERTEX_POINT('',#262516); +#262516 = CARTESIAN_POINT('',(138.599042,-81.3231,-5.E-02)); +#262517 = CIRCLE('',#262518,0.487392); +#262518 = AXIS2_PLACEMENT_3D('',#262519,#262520,#262521); +#262519 = CARTESIAN_POINT('',(138.11165,-81.3231,-5.E-02)); +#262520 = DIRECTION('',(0.,0.,1.)); +#262521 = DIRECTION('',(1.,0.,-0.)); +#262522 = FACE_BOUND('',#262523,.T.); +#262523 = EDGE_LOOP('',(#262524)); +#262524 = ORIENTED_EDGE('',*,*,#262525,.T.); +#262525 = EDGE_CURVE('',#262526,#262526,#262528,.T.); +#262526 = VERTEX_POINT('',#262527); +#262527 = CARTESIAN_POINT('',(141.139042,-81.3231,-5.E-02)); +#262528 = CIRCLE('',#262529,0.487392); +#262529 = AXIS2_PLACEMENT_3D('',#262530,#262531,#262532); +#262530 = CARTESIAN_POINT('',(140.65165,-81.3231,-5.E-02)); +#262531 = DIRECTION('',(0.,0.,1.)); +#262532 = DIRECTION('',(1.,0.,-0.)); +#262533 = FACE_BOUND('',#262534,.T.); +#262534 = EDGE_LOOP('',(#262535)); +#262535 = ORIENTED_EDGE('',*,*,#262536,.T.); +#262536 = EDGE_CURVE('',#262537,#262537,#262539,.T.); +#262537 = VERTEX_POINT('',#262538); +#262538 = CARTESIAN_POINT('',(143.679042,-81.3231,-5.E-02)); +#262539 = CIRCLE('',#262540,0.487392); +#262540 = AXIS2_PLACEMENT_3D('',#262541,#262542,#262543); +#262541 = CARTESIAN_POINT('',(143.19165,-81.3231,-5.E-02)); +#262542 = DIRECTION('',(0.,0.,1.)); +#262543 = DIRECTION('',(1.,0.,-0.)); +#262544 = FACE_BOUND('',#262545,.T.); +#262545 = EDGE_LOOP('',(#262546)); +#262546 = ORIENTED_EDGE('',*,*,#262547,.T.); +#262547 = EDGE_CURVE('',#262548,#262548,#262550,.T.); +#262548 = VERTEX_POINT('',#262549); +#262549 = CARTESIAN_POINT('',(146.219042,-81.3231,-5.E-02)); +#262550 = CIRCLE('',#262551,0.487392); +#262551 = AXIS2_PLACEMENT_3D('',#262552,#262553,#262554); +#262552 = CARTESIAN_POINT('',(145.73165,-81.3231,-5.E-02)); +#262553 = DIRECTION('',(0.,0.,1.)); +#262554 = DIRECTION('',(1.,0.,-0.)); +#262555 = FACE_BOUND('',#262556,.T.); +#262556 = EDGE_LOOP('',(#262557)); +#262557 = ORIENTED_EDGE('',*,*,#262558,.T.); +#262558 = EDGE_CURVE('',#262559,#262559,#262561,.T.); +#262559 = VERTEX_POINT('',#262560); +#262560 = CARTESIAN_POINT('',(148.759042,-81.3231,-5.E-02)); +#262561 = CIRCLE('',#262562,0.487392); +#262562 = AXIS2_PLACEMENT_3D('',#262563,#262564,#262565); +#262563 = CARTESIAN_POINT('',(148.27165,-81.3231,-5.E-02)); +#262564 = DIRECTION('',(0.,0.,1.)); +#262565 = DIRECTION('',(1.,0.,-0.)); +#262566 = FACE_BOUND('',#262567,.T.); +#262567 = EDGE_LOOP('',(#262568)); +#262568 = ORIENTED_EDGE('',*,*,#262569,.T.); +#262569 = EDGE_CURVE('',#262570,#262570,#262572,.T.); +#262570 = VERTEX_POINT('',#262571); +#262571 = CARTESIAN_POINT('',(151.299042,-81.3231,-5.E-02)); +#262572 = CIRCLE('',#262573,0.487392); +#262573 = AXIS2_PLACEMENT_3D('',#262574,#262575,#262576); +#262574 = CARTESIAN_POINT('',(150.81165,-81.3231,-5.E-02)); +#262575 = DIRECTION('',(0.,0.,1.)); +#262576 = DIRECTION('',(1.,0.,-0.)); +#262577 = FACE_BOUND('',#262578,.T.); +#262578 = EDGE_LOOP('',(#262579)); +#262579 = ORIENTED_EDGE('',*,*,#262580,.T.); +#262580 = EDGE_CURVE('',#262581,#262581,#262583,.T.); +#262581 = VERTEX_POINT('',#262582); +#262582 = CARTESIAN_POINT('',(174.579042,-80.8231,-5.E-02)); +#262583 = CIRCLE('',#262584,0.387392); +#262584 = AXIS2_PLACEMENT_3D('',#262585,#262586,#262587); +#262585 = CARTESIAN_POINT('',(174.19165,-80.8231,-5.E-02)); +#262586 = DIRECTION('',(0.,0.,1.)); +#262587 = DIRECTION('',(1.,0.,-0.)); +#262588 = FACE_BOUND('',#262589,.T.); +#262589 = EDGE_LOOP('',(#262590)); +#262590 = ORIENTED_EDGE('',*,*,#262591,.T.); +#262591 = EDGE_CURVE('',#262592,#262592,#262594,.T.); +#262592 = VERTEX_POINT('',#262593); +#262593 = CARTESIAN_POINT('',(196.929042,-80.8231,-5.E-02)); +#262594 = CIRCLE('',#262595,0.387392); +#262595 = AXIS2_PLACEMENT_3D('',#262596,#262597,#262598); +#262596 = CARTESIAN_POINT('',(196.54165,-80.8231,-5.E-02)); +#262597 = DIRECTION('',(0.,0.,1.)); +#262598 = DIRECTION('',(1.,0.,-0.)); +#262599 = FACE_BOUND('',#262600,.T.); +#262600 = EDGE_LOOP('',(#262601)); +#262601 = ORIENTED_EDGE('',*,*,#262602,.T.); +#262602 = EDGE_CURVE('',#262603,#262603,#262605,.T.); +#262603 = VERTEX_POINT('',#262604); +#262604 = CARTESIAN_POINT('',(210.654042,-80.0731,-5.E-02)); +#262605 = CIRCLE('',#262606,0.487392); +#262606 = AXIS2_PLACEMENT_3D('',#262607,#262608,#262609); +#262607 = CARTESIAN_POINT('',(210.16665,-80.0731,-5.E-02)); +#262608 = DIRECTION('',(0.,0.,1.)); +#262609 = DIRECTION('',(1.,0.,-0.)); +#262610 = FACE_BOUND('',#262611,.T.); +#262611 = EDGE_LOOP('',(#262612)); +#262612 = ORIENTED_EDGE('',*,*,#262613,.T.); +#262613 = EDGE_CURVE('',#262614,#262614,#262616,.T.); +#262614 = VERTEX_POINT('',#262615); +#262615 = CARTESIAN_POINT('',(174.579042,-78.8231,-5.E-02)); +#262616 = CIRCLE('',#262617,0.387392); +#262617 = AXIS2_PLACEMENT_3D('',#262618,#262619,#262620); +#262618 = CARTESIAN_POINT('',(174.19165,-78.8231,-5.E-02)); +#262619 = DIRECTION('',(0.,0.,1.)); +#262620 = DIRECTION('',(1.,0.,-0.)); +#262621 = FACE_BOUND('',#262622,.T.); +#262622 = EDGE_LOOP('',(#262623)); +#262623 = ORIENTED_EDGE('',*,*,#262624,.T.); +#262624 = EDGE_CURVE('',#262625,#262625,#262627,.T.); +#262625 = VERTEX_POINT('',#262626); +#262626 = CARTESIAN_POINT('',(196.929042,-78.8231,-5.E-02)); +#262627 = CIRCLE('',#262628,0.387392); +#262628 = AXIS2_PLACEMENT_3D('',#262629,#262630,#262631); +#262629 = CARTESIAN_POINT('',(196.54165,-78.8231,-5.E-02)); +#262630 = DIRECTION('',(0.,0.,1.)); +#262631 = DIRECTION('',(1.,0.,-0.)); +#262632 = FACE_BOUND('',#262633,.T.); +#262633 = EDGE_LOOP('',(#262634)); +#262634 = ORIENTED_EDGE('',*,*,#262635,.T.); +#262635 = EDGE_CURVE('',#262636,#262636,#262638,.T.); +#262636 = VERTEX_POINT('',#262637); +#262637 = CARTESIAN_POINT('',(210.654042,-77.5731,-5.E-02)); +#262638 = CIRCLE('',#262639,0.487392); +#262639 = AXIS2_PLACEMENT_3D('',#262640,#262641,#262642); +#262640 = CARTESIAN_POINT('',(210.16665,-77.5731,-5.E-02)); +#262641 = DIRECTION('',(0.,0.,1.)); +#262642 = DIRECTION('',(1.,0.,-0.)); +#262643 = FACE_BOUND('',#262644,.T.); +#262644 = EDGE_LOOP('',(#262645)); +#262645 = ORIENTED_EDGE('',*,*,#262646,.T.); +#262646 = EDGE_CURVE('',#262647,#262647,#262649,.T.); +#262647 = VERTEX_POINT('',#262648); +#262648 = CARTESIAN_POINT('',(174.579042,-76.8231,-5.E-02)); +#262649 = CIRCLE('',#262650,0.387392); +#262650 = AXIS2_PLACEMENT_3D('',#262651,#262652,#262653); +#262651 = CARTESIAN_POINT('',(174.19165,-76.8231,-5.E-02)); +#262652 = DIRECTION('',(0.,0.,1.)); +#262653 = DIRECTION('',(1.,0.,-0.)); +#262654 = FACE_BOUND('',#262655,.T.); +#262655 = EDGE_LOOP('',(#262656)); +#262656 = ORIENTED_EDGE('',*,*,#262657,.T.); +#262657 = EDGE_CURVE('',#262658,#262658,#262660,.T.); +#262658 = VERTEX_POINT('',#262659); +#262659 = CARTESIAN_POINT('',(196.929042,-76.8231,-5.E-02)); +#262660 = CIRCLE('',#262661,0.387392); +#262661 = AXIS2_PLACEMENT_3D('',#262662,#262663,#262664); +#262662 = CARTESIAN_POINT('',(196.54165,-76.8231,-5.E-02)); +#262663 = DIRECTION('',(0.,0.,1.)); +#262664 = DIRECTION('',(1.,0.,-0.)); +#262665 = FACE_BOUND('',#262666,.T.); +#262666 = EDGE_LOOP('',(#262667)); +#262667 = ORIENTED_EDGE('',*,*,#262668,.T.); +#262668 = EDGE_CURVE('',#262669,#262669,#262671,.T.); +#262669 = VERTEX_POINT('',#262670); +#262670 = CARTESIAN_POINT('',(174.579042,-74.8231,-5.E-02)); +#262671 = CIRCLE('',#262672,0.387392); +#262672 = AXIS2_PLACEMENT_3D('',#262673,#262674,#262675); +#262673 = CARTESIAN_POINT('',(174.19165,-74.8231,-5.E-02)); +#262674 = DIRECTION('',(0.,0.,1.)); +#262675 = DIRECTION('',(1.,0.,-0.)); +#262676 = FACE_BOUND('',#262677,.T.); +#262677 = EDGE_LOOP('',(#262678)); +#262678 = ORIENTED_EDGE('',*,*,#262679,.T.); +#262679 = EDGE_CURVE('',#262680,#262680,#262682,.T.); +#262680 = VERTEX_POINT('',#262681); +#262681 = CARTESIAN_POINT('',(196.929042,-74.8231,-5.E-02)); +#262682 = CIRCLE('',#262683,0.387392); +#262683 = AXIS2_PLACEMENT_3D('',#262684,#262685,#262686); +#262684 = CARTESIAN_POINT('',(196.54165,-74.8231,-5.E-02)); +#262685 = DIRECTION('',(0.,0.,1.)); +#262686 = DIRECTION('',(1.,0.,-0.)); +#262687 = FACE_BOUND('',#262688,.T.); +#262688 = EDGE_LOOP('',(#262689)); +#262689 = ORIENTED_EDGE('',*,*,#262690,.T.); +#262690 = EDGE_CURVE('',#262691,#262691,#262693,.T.); +#262691 = VERTEX_POINT('',#262692); +#262692 = CARTESIAN_POINT('',(107.679042,-74.1031,-5.E-02)); +#262693 = CIRCLE('',#262694,0.487392); +#262694 = AXIS2_PLACEMENT_3D('',#262695,#262696,#262697); +#262695 = CARTESIAN_POINT('',(107.19165,-74.1031,-5.E-02)); +#262696 = DIRECTION('',(0.,0.,1.)); +#262697 = DIRECTION('',(1.,0.,-0.)); +#262698 = FACE_BOUND('',#262699,.T.); +#262699 = EDGE_LOOP('',(#262700)); +#262700 = ORIENTED_EDGE('',*,*,#262701,.T.); +#262701 = EDGE_CURVE('',#262702,#262702,#262704,.T.); +#262702 = VERTEX_POINT('',#262703); +#262703 = CARTESIAN_POINT('',(110.219042,-74.1031,-5.E-02)); +#262704 = CIRCLE('',#262705,0.487392); +#262705 = AXIS2_PLACEMENT_3D('',#262706,#262707,#262708); +#262706 = CARTESIAN_POINT('',(109.73165,-74.1031,-5.E-02)); +#262707 = DIRECTION('',(0.,0.,1.)); +#262708 = DIRECTION('',(1.,0.,-0.)); +#262709 = FACE_BOUND('',#262710,.T.); +#262710 = EDGE_LOOP('',(#262711)); +#262711 = ORIENTED_EDGE('',*,*,#262712,.T.); +#262712 = EDGE_CURVE('',#262713,#262713,#262715,.T.); +#262713 = VERTEX_POINT('',#262714); +#262714 = CARTESIAN_POINT('',(112.759042,-74.1031,-5.E-02)); +#262715 = CIRCLE('',#262716,0.487392); +#262716 = AXIS2_PLACEMENT_3D('',#262717,#262718,#262719); +#262717 = CARTESIAN_POINT('',(112.27165,-74.1031,-5.E-02)); +#262718 = DIRECTION('',(0.,0.,1.)); +#262719 = DIRECTION('',(1.,0.,-0.)); +#262720 = FACE_BOUND('',#262721,.T.); +#262721 = EDGE_LOOP('',(#262722)); +#262722 = ORIENTED_EDGE('',*,*,#262723,.T.); +#262723 = EDGE_CURVE('',#262724,#262724,#262726,.T.); +#262724 = VERTEX_POINT('',#262725); +#262725 = CARTESIAN_POINT('',(115.299042,-74.1031,-5.E-02)); +#262726 = CIRCLE('',#262727,0.487392); +#262727 = AXIS2_PLACEMENT_3D('',#262728,#262729,#262730); +#262728 = CARTESIAN_POINT('',(114.81165,-74.1031,-5.E-02)); +#262729 = DIRECTION('',(0.,0.,1.)); +#262730 = DIRECTION('',(1.,0.,-0.)); +#262731 = FACE_BOUND('',#262732,.T.); +#262732 = EDGE_LOOP('',(#262733)); +#262733 = ORIENTED_EDGE('',*,*,#262734,.T.); +#262734 = EDGE_CURVE('',#262735,#262735,#262737,.T.); +#262735 = VERTEX_POINT('',#262736); +#262736 = CARTESIAN_POINT('',(117.839042,-74.1031,-5.E-02)); +#262737 = CIRCLE('',#262738,0.487392); +#262738 = AXIS2_PLACEMENT_3D('',#262739,#262740,#262741); +#262739 = CARTESIAN_POINT('',(117.35165,-74.1031,-5.E-02)); +#262740 = DIRECTION('',(0.,0.,1.)); +#262741 = DIRECTION('',(1.,0.,-0.)); +#262742 = FACE_BOUND('',#262743,.T.); +#262743 = EDGE_LOOP('',(#262744)); +#262744 = ORIENTED_EDGE('',*,*,#262745,.T.); +#262745 = EDGE_CURVE('',#262746,#262746,#262748,.T.); +#262746 = VERTEX_POINT('',#262747); +#262747 = CARTESIAN_POINT('',(120.379042,-74.1031,-5.E-02)); +#262748 = CIRCLE('',#262749,0.487392); +#262749 = AXIS2_PLACEMENT_3D('',#262750,#262751,#262752); +#262750 = CARTESIAN_POINT('',(119.89165,-74.1031,-5.E-02)); +#262751 = DIRECTION('',(0.,0.,1.)); +#262752 = DIRECTION('',(1.,0.,-0.)); +#262753 = FACE_BOUND('',#262754,.T.); +#262754 = EDGE_LOOP('',(#262755)); +#262755 = ORIENTED_EDGE('',*,*,#262756,.T.); +#262756 = EDGE_CURVE('',#262757,#262757,#262759,.T.); +#262757 = VERTEX_POINT('',#262758); +#262758 = CARTESIAN_POINT('',(122.919042,-74.1031,-5.E-02)); +#262759 = CIRCLE('',#262760,0.487392); +#262760 = AXIS2_PLACEMENT_3D('',#262761,#262762,#262763); +#262761 = CARTESIAN_POINT('',(122.43165,-74.1031,-5.E-02)); +#262762 = DIRECTION('',(0.,0.,1.)); +#262763 = DIRECTION('',(1.,0.,-0.)); +#262764 = FACE_BOUND('',#262765,.T.); +#262765 = EDGE_LOOP('',(#262766)); +#262766 = ORIENTED_EDGE('',*,*,#262767,.T.); +#262767 = EDGE_CURVE('',#262768,#262768,#262770,.T.); +#262768 = VERTEX_POINT('',#262769); +#262769 = CARTESIAN_POINT('',(125.459042,-74.1031,-5.E-02)); +#262770 = CIRCLE('',#262771,0.487392); +#262771 = AXIS2_PLACEMENT_3D('',#262772,#262773,#262774); +#262772 = CARTESIAN_POINT('',(124.97165,-74.1031,-5.E-02)); +#262773 = DIRECTION('',(0.,0.,1.)); +#262774 = DIRECTION('',(1.,0.,-0.)); +#262775 = FACE_BOUND('',#262776,.T.); +#262776 = EDGE_LOOP('',(#262777)); +#262777 = ORIENTED_EDGE('',*,*,#262778,.T.); +#262778 = EDGE_CURVE('',#262779,#262779,#262781,.T.); +#262779 = VERTEX_POINT('',#262780); +#262780 = CARTESIAN_POINT('',(127.999042,-74.1031,-5.E-02)); +#262781 = CIRCLE('',#262782,0.487392); +#262782 = AXIS2_PLACEMENT_3D('',#262783,#262784,#262785); +#262783 = CARTESIAN_POINT('',(127.51165,-74.1031,-5.E-02)); +#262784 = DIRECTION('',(0.,0.,1.)); +#262785 = DIRECTION('',(1.,0.,-0.)); +#262786 = FACE_BOUND('',#262787,.T.); +#262787 = EDGE_LOOP('',(#262788)); +#262788 = ORIENTED_EDGE('',*,*,#262789,.T.); +#262789 = EDGE_CURVE('',#262790,#262790,#262792,.T.); +#262790 = VERTEX_POINT('',#262791); +#262791 = CARTESIAN_POINT('',(130.539042,-74.1031,-5.E-02)); +#262792 = CIRCLE('',#262793,0.487392); +#262793 = AXIS2_PLACEMENT_3D('',#262794,#262795,#262796); +#262794 = CARTESIAN_POINT('',(130.05165,-74.1031,-5.E-02)); +#262795 = DIRECTION('',(0.,0.,1.)); +#262796 = DIRECTION('',(1.,0.,-0.)); +#262797 = FACE_BOUND('',#262798,.T.); +#262798 = EDGE_LOOP('',(#262799)); +#262799 = ORIENTED_EDGE('',*,*,#262800,.T.); +#262800 = EDGE_CURVE('',#262801,#262801,#262803,.T.); +#262801 = VERTEX_POINT('',#262802); +#262802 = CARTESIAN_POINT('',(133.079042,-74.1031,-5.E-02)); +#262803 = CIRCLE('',#262804,0.487392); +#262804 = AXIS2_PLACEMENT_3D('',#262805,#262806,#262807); +#262805 = CARTESIAN_POINT('',(132.59165,-74.1031,-5.E-02)); +#262806 = DIRECTION('',(0.,0.,1.)); +#262807 = DIRECTION('',(1.,0.,-0.)); +#262808 = FACE_BOUND('',#262809,.T.); +#262809 = EDGE_LOOP('',(#262810)); +#262810 = ORIENTED_EDGE('',*,*,#262811,.T.); +#262811 = EDGE_CURVE('',#262812,#262812,#262814,.T.); +#262812 = VERTEX_POINT('',#262813); +#262813 = CARTESIAN_POINT('',(135.619042,-74.1031,-5.E-02)); +#262814 = CIRCLE('',#262815,0.487392); +#262815 = AXIS2_PLACEMENT_3D('',#262816,#262817,#262818); +#262816 = CARTESIAN_POINT('',(135.13165,-74.1031,-5.E-02)); +#262817 = DIRECTION('',(0.,0.,1.)); +#262818 = DIRECTION('',(1.,0.,-0.)); +#262819 = FACE_BOUND('',#262820,.T.); +#262820 = EDGE_LOOP('',(#262821)); +#262821 = ORIENTED_EDGE('',*,*,#262822,.T.); +#262822 = EDGE_CURVE('',#262823,#262823,#262825,.T.); +#262823 = VERTEX_POINT('',#262824); +#262824 = CARTESIAN_POINT('',(138.159042,-74.1031,-5.E-02)); +#262825 = CIRCLE('',#262826,0.487392); +#262826 = AXIS2_PLACEMENT_3D('',#262827,#262828,#262829); +#262827 = CARTESIAN_POINT('',(137.67165,-74.1031,-5.E-02)); +#262828 = DIRECTION('',(0.,0.,1.)); +#262829 = DIRECTION('',(1.,0.,-0.)); +#262830 = FACE_BOUND('',#262831,.T.); +#262831 = EDGE_LOOP('',(#262832)); +#262832 = ORIENTED_EDGE('',*,*,#262833,.T.); +#262833 = EDGE_CURVE('',#262834,#262834,#262836,.T.); +#262834 = VERTEX_POINT('',#262835); +#262835 = CARTESIAN_POINT('',(140.699042,-74.1031,-5.E-02)); +#262836 = CIRCLE('',#262837,0.487392); +#262837 = AXIS2_PLACEMENT_3D('',#262838,#262839,#262840); +#262838 = CARTESIAN_POINT('',(140.21165,-74.1031,-5.E-02)); +#262839 = DIRECTION('',(0.,0.,1.)); +#262840 = DIRECTION('',(1.,0.,-0.)); +#262841 = FACE_BOUND('',#262842,.T.); +#262842 = EDGE_LOOP('',(#262843)); +#262843 = ORIENTED_EDGE('',*,*,#262844,.T.); +#262844 = EDGE_CURVE('',#262845,#262845,#262847,.T.); +#262845 = VERTEX_POINT('',#262846); +#262846 = CARTESIAN_POINT('',(143.239042,-74.1031,-5.E-02)); +#262847 = CIRCLE('',#262848,0.487392); +#262848 = AXIS2_PLACEMENT_3D('',#262849,#262850,#262851); +#262849 = CARTESIAN_POINT('',(142.75165,-74.1031,-5.E-02)); +#262850 = DIRECTION('',(0.,0.,1.)); +#262851 = DIRECTION('',(1.,0.,-0.)); +#262852 = FACE_BOUND('',#262853,.T.); +#262853 = EDGE_LOOP('',(#262854)); +#262854 = ORIENTED_EDGE('',*,*,#262855,.T.); +#262855 = EDGE_CURVE('',#262856,#262856,#262858,.T.); +#262856 = VERTEX_POINT('',#262857); +#262857 = CARTESIAN_POINT('',(145.779042,-74.1031,-5.E-02)); +#262858 = CIRCLE('',#262859,0.487392); +#262859 = AXIS2_PLACEMENT_3D('',#262860,#262861,#262862); +#262860 = CARTESIAN_POINT('',(145.29165,-74.1031,-5.E-02)); +#262861 = DIRECTION('',(0.,0.,1.)); +#262862 = DIRECTION('',(1.,0.,-0.)); +#262863 = FACE_BOUND('',#262864,.T.); +#262864 = EDGE_LOOP('',(#262865)); +#262865 = ORIENTED_EDGE('',*,*,#262866,.T.); +#262866 = EDGE_CURVE('',#262867,#262867,#262869,.T.); +#262867 = VERTEX_POINT('',#262868); +#262868 = CARTESIAN_POINT('',(148.319042,-74.1031,-5.E-02)); +#262869 = CIRCLE('',#262870,0.487392); +#262870 = AXIS2_PLACEMENT_3D('',#262871,#262872,#262873); +#262871 = CARTESIAN_POINT('',(147.83165,-74.1031,-5.E-02)); +#262872 = DIRECTION('',(0.,0.,1.)); +#262873 = DIRECTION('',(1.,0.,-0.)); +#262874 = FACE_BOUND('',#262875,.T.); +#262875 = EDGE_LOOP('',(#262876)); +#262876 = ORIENTED_EDGE('',*,*,#262877,.T.); +#262877 = EDGE_CURVE('',#262878,#262878,#262880,.T.); +#262878 = VERTEX_POINT('',#262879); +#262879 = CARTESIAN_POINT('',(150.859042,-74.1031,-5.E-02)); +#262880 = CIRCLE('',#262881,0.487392); +#262881 = AXIS2_PLACEMENT_3D('',#262882,#262883,#262884); +#262882 = CARTESIAN_POINT('',(150.37165,-74.1031,-5.E-02)); +#262883 = DIRECTION('',(0.,0.,1.)); +#262884 = DIRECTION('',(1.,0.,-0.)); +#262885 = FACE_BOUND('',#262886,.T.); +#262886 = EDGE_LOOP('',(#262887)); +#262887 = ORIENTED_EDGE('',*,*,#262888,.T.); +#262888 = EDGE_CURVE('',#262889,#262889,#262891,.T.); +#262889 = VERTEX_POINT('',#262890); +#262890 = CARTESIAN_POINT('',(153.399042,-74.1031,-5.E-02)); +#262891 = CIRCLE('',#262892,0.487392); +#262892 = AXIS2_PLACEMENT_3D('',#262893,#262894,#262895); +#262893 = CARTESIAN_POINT('',(152.91165,-74.1031,-5.E-02)); +#262894 = DIRECTION('',(0.,0.,1.)); +#262895 = DIRECTION('',(1.,0.,-0.)); +#262896 = FACE_BOUND('',#262897,.T.); +#262897 = EDGE_LOOP('',(#262898)); +#262898 = ORIENTED_EDGE('',*,*,#262899,.T.); +#262899 = EDGE_CURVE('',#262900,#262900,#262902,.T.); +#262900 = VERTEX_POINT('',#262901); +#262901 = CARTESIAN_POINT('',(155.939042,-74.1031,-5.E-02)); +#262902 = CIRCLE('',#262903,0.487392); +#262903 = AXIS2_PLACEMENT_3D('',#262904,#262905,#262906); +#262904 = CARTESIAN_POINT('',(155.45165,-74.1031,-5.E-02)); +#262905 = DIRECTION('',(0.,0.,1.)); +#262906 = DIRECTION('',(1.,0.,-0.)); +#262907 = FACE_BOUND('',#262908,.T.); +#262908 = EDGE_LOOP('',(#262909)); +#262909 = ORIENTED_EDGE('',*,*,#262910,.T.); +#262910 = EDGE_CURVE('',#262911,#262911,#262913,.T.); +#262911 = VERTEX_POINT('',#262912); +#262912 = CARTESIAN_POINT('',(210.654042,-70.8231,-5.E-02)); +#262913 = CIRCLE('',#262914,0.487392); +#262914 = AXIS2_PLACEMENT_3D('',#262915,#262916,#262917); +#262915 = CARTESIAN_POINT('',(210.16665,-70.8231,-5.E-02)); +#262916 = DIRECTION('',(0.,0.,1.)); +#262917 = DIRECTION('',(1.,0.,-0.)); +#262918 = FACE_BOUND('',#262919,.T.); +#262919 = EDGE_LOOP('',(#262920)); +#262920 = ORIENTED_EDGE('',*,*,#262921,.T.); +#262921 = EDGE_CURVE('',#262922,#262922,#262924,.T.); +#262922 = VERTEX_POINT('',#262923); +#262923 = CARTESIAN_POINT('',(210.654042,-68.3231,-5.E-02)); +#262924 = CIRCLE('',#262925,0.487392); +#262925 = AXIS2_PLACEMENT_3D('',#262926,#262927,#262928); +#262926 = CARTESIAN_POINT('',(210.16665,-68.3231,-5.E-02)); +#262927 = DIRECTION('',(0.,0.,1.)); +#262928 = DIRECTION('',(1.,0.,-0.)); +#262929 = FACE_BOUND('',#262930,.T.); +#262930 = EDGE_LOOP('',(#262931)); +#262931 = ORIENTED_EDGE('',*,*,#262932,.T.); +#262932 = EDGE_CURVE('',#262933,#262933,#262935,.T.); +#262933 = VERTEX_POINT('',#262934); +#262934 = CARTESIAN_POINT('',(189.771542,-66.0256,-5.E-02)); +#262935 = CIRCLE('',#262936,0.487392); +#262936 = AXIS2_PLACEMENT_3D('',#262937,#262938,#262939); +#262937 = CARTESIAN_POINT('',(189.28415,-66.0256,-5.E-02)); +#262938 = DIRECTION('',(0.,0.,1.)); +#262939 = DIRECTION('',(1.,0.,-0.)); +#262940 = FACE_BOUND('',#262941,.T.); +#262941 = EDGE_LOOP('',(#262942)); +#262942 = ORIENTED_EDGE('',*,*,#262943,.T.); +#262943 = EDGE_CURVE('',#262944,#262944,#262946,.T.); +#262944 = VERTEX_POINT('',#262945); +#262945 = CARTESIAN_POINT('',(194.851542,-66.0256,-5.E-02)); +#262946 = CIRCLE('',#262947,0.487392); +#262947 = AXIS2_PLACEMENT_3D('',#262948,#262949,#262950); +#262948 = CARTESIAN_POINT('',(194.36415,-66.0256,-5.E-02)); +#262949 = DIRECTION('',(0.,0.,1.)); +#262950 = DIRECTION('',(1.,0.,-0.)); +#262951 = FACE_BOUND('',#262952,.T.); +#262952 = EDGE_LOOP('',(#262953)); +#262953 = ORIENTED_EDGE('',*,*,#262954,.T.); +#262954 = EDGE_CURVE('',#262955,#262955,#262957,.T.); +#262955 = VERTEX_POINT('',#262956); +#262956 = CARTESIAN_POINT('',(210.654042,-61.8231,-5.E-02)); +#262957 = CIRCLE('',#262958,0.462392); +#262958 = AXIS2_PLACEMENT_3D('',#262959,#262960,#262961); +#262959 = CARTESIAN_POINT('',(210.19165,-61.8231,-5.E-02)); +#262960 = DIRECTION('',(0.,0.,1.)); +#262961 = DIRECTION('',(1.,0.,-0.)); +#262962 = FACE_BOUND('',#262963,.T.); +#262963 = EDGE_LOOP('',(#262964)); +#262964 = ORIENTED_EDGE('',*,*,#262965,.T.); +#262965 = EDGE_CURVE('',#262966,#262966,#262968,.T.); +#262966 = VERTEX_POINT('',#262967); +#262967 = CARTESIAN_POINT('',(210.654042,-59.3231,-5.E-02)); +#262968 = CIRCLE('',#262969,0.462392); +#262969 = AXIS2_PLACEMENT_3D('',#262970,#262971,#262972); +#262970 = CARTESIAN_POINT('',(210.19165,-59.3231,-5.E-02)); +#262971 = DIRECTION('',(0.,0.,1.)); +#262972 = DIRECTION('',(1.,0.,-0.)); +#262973 = FACE_BOUND('',#262974,.T.); +#262974 = EDGE_LOOP('',(#262975)); +#262975 = ORIENTED_EDGE('',*,*,#262976,.T.); +#262976 = EDGE_CURVE('',#262977,#262977,#262979,.T.); +#262977 = VERTEX_POINT('',#262978); +#262978 = CARTESIAN_POINT('',(189.771542,-58.4056,-5.E-02)); +#262979 = CIRCLE('',#262980,0.487392); +#262980 = AXIS2_PLACEMENT_3D('',#262981,#262982,#262983); +#262981 = CARTESIAN_POINT('',(189.28415,-58.4056,-5.E-02)); +#262982 = DIRECTION('',(0.,0.,1.)); +#262983 = DIRECTION('',(1.,0.,-0.)); +#262984 = FACE_BOUND('',#262985,.T.); +#262985 = EDGE_LOOP('',(#262986)); +#262986 = ORIENTED_EDGE('',*,*,#262987,.T.); +#262987 = EDGE_CURVE('',#262988,#262988,#262990,.T.); +#262988 = VERTEX_POINT('',#262989); +#262989 = CARTESIAN_POINT('',(194.851542,-58.4056,-5.E-02)); +#262990 = CIRCLE('',#262991,0.487392); +#262991 = AXIS2_PLACEMENT_3D('',#262992,#262993,#262994); +#262992 = CARTESIAN_POINT('',(194.36415,-58.4056,-5.E-02)); +#262993 = DIRECTION('',(0.,0.,1.)); +#262994 = DIRECTION('',(1.,0.,-0.)); +#262995 = FACE_BOUND('',#262996,.T.); +#262996 = EDGE_LOOP('',(#262997)); +#262997 = ORIENTED_EDGE('',*,*,#262998,.T.); +#262998 = EDGE_CURVE('',#262999,#262999,#263001,.T.); +#262999 = VERTEX_POINT('',#263000); +#263000 = CARTESIAN_POINT('',(210.654042,-56.8231,-5.E-02)); +#263001 = CIRCLE('',#263002,0.462392); +#263002 = AXIS2_PLACEMENT_3D('',#263003,#263004,#263005); +#263003 = CARTESIAN_POINT('',(210.19165,-56.8231,-5.E-02)); +#263004 = DIRECTION('',(0.,0.,1.)); +#263005 = DIRECTION('',(1.,0.,-0.)); +#263006 = FACE_BOUND('',#263007,.T.); +#263007 = EDGE_LOOP('',(#263008)); +#263008 = ORIENTED_EDGE('',*,*,#263009,.T.); +#263009 = EDGE_CURVE('',#263010,#263010,#263012,.T.); +#263010 = VERTEX_POINT('',#263011); +#263011 = CARTESIAN_POINT('',(107.679042,-56.3231,-5.E-02)); +#263012 = CIRCLE('',#263013,0.487392); +#263013 = AXIS2_PLACEMENT_3D('',#263014,#263015,#263016); +#263014 = CARTESIAN_POINT('',(107.19165,-56.3231,-5.E-02)); +#263015 = DIRECTION('',(0.,0.,1.)); +#263016 = DIRECTION('',(1.,0.,-0.)); +#263017 = FACE_BOUND('',#263018,.T.); +#263018 = EDGE_LOOP('',(#263019)); +#263019 = ORIENTED_EDGE('',*,*,#263020,.T.); +#263020 = EDGE_CURVE('',#263021,#263021,#263023,.T.); +#263021 = VERTEX_POINT('',#263022); +#263022 = CARTESIAN_POINT('',(110.219042,-56.3231,-5.E-02)); +#263023 = CIRCLE('',#263024,0.487392); +#263024 = AXIS2_PLACEMENT_3D('',#263025,#263026,#263027); +#263025 = CARTESIAN_POINT('',(109.73165,-56.3231,-5.E-02)); +#263026 = DIRECTION('',(0.,0.,1.)); +#263027 = DIRECTION('',(1.,0.,-0.)); +#263028 = FACE_BOUND('',#263029,.T.); +#263029 = EDGE_LOOP('',(#263030)); +#263030 = ORIENTED_EDGE('',*,*,#263031,.T.); +#263031 = EDGE_CURVE('',#263032,#263032,#263034,.T.); +#263032 = VERTEX_POINT('',#263033); +#263033 = CARTESIAN_POINT('',(112.759042,-56.3231,-5.E-02)); +#263034 = CIRCLE('',#263035,0.487392); +#263035 = AXIS2_PLACEMENT_3D('',#263036,#263037,#263038); +#263036 = CARTESIAN_POINT('',(112.27165,-56.3231,-5.E-02)); +#263037 = DIRECTION('',(0.,0.,1.)); +#263038 = DIRECTION('',(1.,0.,-0.)); +#263039 = FACE_BOUND('',#263040,.T.); +#263040 = EDGE_LOOP('',(#263041)); +#263041 = ORIENTED_EDGE('',*,*,#263042,.T.); +#263042 = EDGE_CURVE('',#263043,#263043,#263045,.T.); +#263043 = VERTEX_POINT('',#263044); +#263044 = CARTESIAN_POINT('',(115.299042,-56.3231,-5.E-02)); +#263045 = CIRCLE('',#263046,0.487392); +#263046 = AXIS2_PLACEMENT_3D('',#263047,#263048,#263049); +#263047 = CARTESIAN_POINT('',(114.81165,-56.3231,-5.E-02)); +#263048 = DIRECTION('',(0.,0.,1.)); +#263049 = DIRECTION('',(1.,0.,-0.)); +#263050 = FACE_BOUND('',#263051,.T.); +#263051 = EDGE_LOOP('',(#263052)); +#263052 = ORIENTED_EDGE('',*,*,#263053,.T.); +#263053 = EDGE_CURVE('',#263054,#263054,#263056,.T.); +#263054 = VERTEX_POINT('',#263055); +#263055 = CARTESIAN_POINT('',(117.839042,-56.3231,-5.E-02)); +#263056 = CIRCLE('',#263057,0.487392); +#263057 = AXIS2_PLACEMENT_3D('',#263058,#263059,#263060); +#263058 = CARTESIAN_POINT('',(117.35165,-56.3231,-5.E-02)); +#263059 = DIRECTION('',(0.,0.,1.)); +#263060 = DIRECTION('',(1.,0.,-0.)); +#263061 = FACE_BOUND('',#263062,.T.); +#263062 = EDGE_LOOP('',(#263063)); +#263063 = ORIENTED_EDGE('',*,*,#263064,.T.); +#263064 = EDGE_CURVE('',#263065,#263065,#263067,.T.); +#263065 = VERTEX_POINT('',#263066); +#263066 = CARTESIAN_POINT('',(120.379042,-56.3231,-5.E-02)); +#263067 = CIRCLE('',#263068,0.487392); +#263068 = AXIS2_PLACEMENT_3D('',#263069,#263070,#263071); +#263069 = CARTESIAN_POINT('',(119.89165,-56.3231,-5.E-02)); +#263070 = DIRECTION('',(0.,0.,1.)); +#263071 = DIRECTION('',(1.,0.,-0.)); +#263072 = FACE_BOUND('',#263073,.T.); +#263073 = EDGE_LOOP('',(#263074)); +#263074 = ORIENTED_EDGE('',*,*,#263075,.T.); +#263075 = EDGE_CURVE('',#263076,#263076,#263078,.T.); +#263076 = VERTEX_POINT('',#263077); +#263077 = CARTESIAN_POINT('',(122.919042,-56.3231,-5.E-02)); +#263078 = CIRCLE('',#263079,0.487392); +#263079 = AXIS2_PLACEMENT_3D('',#263080,#263081,#263082); +#263080 = CARTESIAN_POINT('',(122.43165,-56.3231,-5.E-02)); +#263081 = DIRECTION('',(0.,0.,1.)); +#263082 = DIRECTION('',(1.,0.,-0.)); +#263083 = FACE_BOUND('',#263084,.T.); +#263084 = EDGE_LOOP('',(#263085)); +#263085 = ORIENTED_EDGE('',*,*,#263086,.T.); +#263086 = EDGE_CURVE('',#263087,#263087,#263089,.T.); +#263087 = VERTEX_POINT('',#263088); +#263088 = CARTESIAN_POINT('',(125.459042,-56.3231,-5.E-02)); +#263089 = CIRCLE('',#263090,0.487392); +#263090 = AXIS2_PLACEMENT_3D('',#263091,#263092,#263093); +#263091 = CARTESIAN_POINT('',(124.97165,-56.3231,-5.E-02)); +#263092 = DIRECTION('',(0.,0.,1.)); +#263093 = DIRECTION('',(1.,0.,-0.)); +#263094 = FACE_BOUND('',#263095,.T.); +#263095 = EDGE_LOOP('',(#263096)); +#263096 = ORIENTED_EDGE('',*,*,#263097,.T.); +#263097 = EDGE_CURVE('',#263098,#263098,#263100,.T.); +#263098 = VERTEX_POINT('',#263099); +#263099 = CARTESIAN_POINT('',(127.999042,-56.3231,-5.E-02)); +#263100 = CIRCLE('',#263101,0.487392); +#263101 = AXIS2_PLACEMENT_3D('',#263102,#263103,#263104); +#263102 = CARTESIAN_POINT('',(127.51165,-56.3231,-5.E-02)); +#263103 = DIRECTION('',(0.,0.,1.)); +#263104 = DIRECTION('',(1.,0.,-0.)); +#263105 = FACE_BOUND('',#263106,.T.); +#263106 = EDGE_LOOP('',(#263107)); +#263107 = ORIENTED_EDGE('',*,*,#263108,.T.); +#263108 = EDGE_CURVE('',#263109,#263109,#263111,.T.); +#263109 = VERTEX_POINT('',#263110); +#263110 = CARTESIAN_POINT('',(130.539042,-56.3231,-5.E-02)); +#263111 = CIRCLE('',#263112,0.487392); +#263112 = AXIS2_PLACEMENT_3D('',#263113,#263114,#263115); +#263113 = CARTESIAN_POINT('',(130.05165,-56.3231,-5.E-02)); +#263114 = DIRECTION('',(0.,0.,1.)); +#263115 = DIRECTION('',(1.,0.,-0.)); +#263116 = FACE_BOUND('',#263117,.T.); +#263117 = EDGE_LOOP('',(#263118)); +#263118 = ORIENTED_EDGE('',*,*,#263119,.T.); +#263119 = EDGE_CURVE('',#263120,#263120,#263122,.T.); +#263120 = VERTEX_POINT('',#263121); +#263121 = CARTESIAN_POINT('',(133.079042,-56.3231,-5.E-02)); +#263122 = CIRCLE('',#263123,0.487392); +#263123 = AXIS2_PLACEMENT_3D('',#263124,#263125,#263126); +#263124 = CARTESIAN_POINT('',(132.59165,-56.3231,-5.E-02)); +#263125 = DIRECTION('',(0.,0.,1.)); +#263126 = DIRECTION('',(1.,0.,-0.)); +#263127 = FACE_BOUND('',#263128,.T.); +#263128 = EDGE_LOOP('',(#263129)); +#263129 = ORIENTED_EDGE('',*,*,#263130,.T.); +#263130 = EDGE_CURVE('',#263131,#263131,#263133,.T.); +#263131 = VERTEX_POINT('',#263132); +#263132 = CARTESIAN_POINT('',(135.619042,-56.3231,-5.E-02)); +#263133 = CIRCLE('',#263134,0.487392); +#263134 = AXIS2_PLACEMENT_3D('',#263135,#263136,#263137); +#263135 = CARTESIAN_POINT('',(135.13165,-56.3231,-5.E-02)); +#263136 = DIRECTION('',(0.,0.,1.)); +#263137 = DIRECTION('',(1.,0.,-0.)); +#263138 = FACE_BOUND('',#263139,.T.); +#263139 = EDGE_LOOP('',(#263140)); +#263140 = ORIENTED_EDGE('',*,*,#263141,.T.); +#263141 = EDGE_CURVE('',#263142,#263142,#263144,.T.); +#263142 = VERTEX_POINT('',#263143); +#263143 = CARTESIAN_POINT('',(138.159042,-56.3231,-5.E-02)); +#263144 = CIRCLE('',#263145,0.487392); +#263145 = AXIS2_PLACEMENT_3D('',#263146,#263147,#263148); +#263146 = CARTESIAN_POINT('',(137.67165,-56.3231,-5.E-02)); +#263147 = DIRECTION('',(0.,0.,1.)); +#263148 = DIRECTION('',(1.,0.,-0.)); +#263149 = FACE_BOUND('',#263150,.T.); +#263150 = EDGE_LOOP('',(#263151)); +#263151 = ORIENTED_EDGE('',*,*,#263152,.T.); +#263152 = EDGE_CURVE('',#263153,#263153,#263155,.T.); +#263153 = VERTEX_POINT('',#263154); +#263154 = CARTESIAN_POINT('',(140.699042,-56.3231,-5.E-02)); +#263155 = CIRCLE('',#263156,0.487392); +#263156 = AXIS2_PLACEMENT_3D('',#263157,#263158,#263159); +#263157 = CARTESIAN_POINT('',(140.21165,-56.3231,-5.E-02)); +#263158 = DIRECTION('',(0.,0.,1.)); +#263159 = DIRECTION('',(1.,0.,-0.)); +#263160 = FACE_BOUND('',#263161,.T.); +#263161 = EDGE_LOOP('',(#263162)); +#263162 = ORIENTED_EDGE('',*,*,#263163,.T.); +#263163 = EDGE_CURVE('',#263164,#263164,#263166,.T.); +#263164 = VERTEX_POINT('',#263165); +#263165 = CARTESIAN_POINT('',(143.239042,-56.3231,-5.E-02)); +#263166 = CIRCLE('',#263167,0.487392); +#263167 = AXIS2_PLACEMENT_3D('',#263168,#263169,#263170); +#263168 = CARTESIAN_POINT('',(142.75165,-56.3231,-5.E-02)); +#263169 = DIRECTION('',(0.,0.,1.)); +#263170 = DIRECTION('',(1.,0.,-0.)); +#263171 = FACE_BOUND('',#263172,.T.); +#263172 = EDGE_LOOP('',(#263173)); +#263173 = ORIENTED_EDGE('',*,*,#263174,.T.); +#263174 = EDGE_CURVE('',#263175,#263175,#263177,.T.); +#263175 = VERTEX_POINT('',#263176); +#263176 = CARTESIAN_POINT('',(145.779042,-56.3231,-5.E-02)); +#263177 = CIRCLE('',#263178,0.487392); +#263178 = AXIS2_PLACEMENT_3D('',#263179,#263180,#263181); +#263179 = CARTESIAN_POINT('',(145.29165,-56.3231,-5.E-02)); +#263180 = DIRECTION('',(0.,0.,1.)); +#263181 = DIRECTION('',(1.,0.,-0.)); +#263182 = FACE_BOUND('',#263183,.T.); +#263183 = EDGE_LOOP('',(#263184)); +#263184 = ORIENTED_EDGE('',*,*,#263185,.T.); +#263185 = EDGE_CURVE('',#263186,#263186,#263188,.T.); +#263186 = VERTEX_POINT('',#263187); +#263187 = CARTESIAN_POINT('',(148.319042,-56.3231,-5.E-02)); +#263188 = CIRCLE('',#263189,0.487392); +#263189 = AXIS2_PLACEMENT_3D('',#263190,#263191,#263192); +#263190 = CARTESIAN_POINT('',(147.83165,-56.3231,-5.E-02)); +#263191 = DIRECTION('',(0.,0.,1.)); +#263192 = DIRECTION('',(1.,0.,-0.)); +#263193 = FACE_BOUND('',#263194,.T.); +#263194 = EDGE_LOOP('',(#263195)); +#263195 = ORIENTED_EDGE('',*,*,#263196,.T.); +#263196 = EDGE_CURVE('',#263197,#263197,#263199,.T.); +#263197 = VERTEX_POINT('',#263198); +#263198 = CARTESIAN_POINT('',(150.859042,-56.3231,-5.E-02)); +#263199 = CIRCLE('',#263200,0.487392); +#263200 = AXIS2_PLACEMENT_3D('',#263201,#263202,#263203); +#263201 = CARTESIAN_POINT('',(150.37165,-56.3231,-5.E-02)); +#263202 = DIRECTION('',(0.,0.,1.)); +#263203 = DIRECTION('',(1.,0.,-0.)); +#263204 = FACE_BOUND('',#263205,.T.); +#263205 = EDGE_LOOP('',(#263206)); +#263206 = ORIENTED_EDGE('',*,*,#263207,.T.); +#263207 = EDGE_CURVE('',#263208,#263208,#263210,.T.); +#263208 = VERTEX_POINT('',#263209); +#263209 = CARTESIAN_POINT('',(153.399042,-56.3231,-5.E-02)); +#263210 = CIRCLE('',#263211,0.487392); +#263211 = AXIS2_PLACEMENT_3D('',#263212,#263213,#263214); +#263212 = CARTESIAN_POINT('',(152.91165,-56.3231,-5.E-02)); +#263213 = DIRECTION('',(0.,0.,1.)); +#263214 = DIRECTION('',(1.,0.,-0.)); +#263215 = FACE_BOUND('',#263216,.T.); +#263216 = EDGE_LOOP('',(#263217)); +#263217 = ORIENTED_EDGE('',*,*,#263218,.T.); +#263218 = EDGE_CURVE('',#263219,#263219,#263221,.T.); +#263219 = VERTEX_POINT('',#263220); +#263220 = CARTESIAN_POINT('',(155.939042,-56.3231,-5.E-02)); +#263221 = CIRCLE('',#263222,0.487392); +#263222 = AXIS2_PLACEMENT_3D('',#263223,#263224,#263225); +#263223 = CARTESIAN_POINT('',(155.45165,-56.3231,-5.E-02)); +#263224 = DIRECTION('',(0.,0.,1.)); +#263225 = DIRECTION('',(1.,0.,-0.)); +#263226 = FACE_BOUND('',#263227,.T.); +#263227 = EDGE_LOOP('',(#263228)); +#263228 = ORIENTED_EDGE('',*,*,#263229,.T.); +#263229 = EDGE_CURVE('',#263230,#263230,#263232,.T.); +#263230 = VERTEX_POINT('',#263231); +#263231 = CARTESIAN_POINT('',(189.771542,-55.8656,-5.E-02)); +#263232 = CIRCLE('',#263233,0.487392); +#263233 = AXIS2_PLACEMENT_3D('',#263234,#263235,#263236); +#263234 = CARTESIAN_POINT('',(189.28415,-55.8656,-5.E-02)); +#263235 = DIRECTION('',(0.,0.,1.)); +#263236 = DIRECTION('',(1.,0.,-0.)); +#263237 = FACE_BOUND('',#263238,.T.); +#263238 = EDGE_LOOP('',(#263239)); +#263239 = ORIENTED_EDGE('',*,*,#263240,.T.); +#263240 = EDGE_CURVE('',#263241,#263241,#263243,.T.); +#263241 = VERTEX_POINT('',#263242); +#263242 = CARTESIAN_POINT('',(194.851542,-55.8656,-5.E-02)); +#263243 = CIRCLE('',#263244,0.487392); +#263244 = AXIS2_PLACEMENT_3D('',#263245,#263246,#263247); +#263245 = CARTESIAN_POINT('',(194.36415,-55.8656,-5.E-02)); +#263246 = DIRECTION('',(0.,0.,1.)); +#263247 = DIRECTION('',(1.,0.,-0.)); +#263248 = FACE_BOUND('',#263249,.T.); +#263249 = EDGE_LOOP('',(#263250)); +#263250 = ORIENTED_EDGE('',*,*,#263251,.T.); +#263251 = EDGE_CURVE('',#263252,#263252,#263254,.T.); +#263252 = VERTEX_POINT('',#263253); +#263253 = CARTESIAN_POINT('',(210.654042,-54.3231,-5.E-02)); +#263254 = CIRCLE('',#263255,0.462392); +#263255 = AXIS2_PLACEMENT_3D('',#263256,#263257,#263258); +#263256 = CARTESIAN_POINT('',(210.19165,-54.3231,-5.E-02)); +#263257 = DIRECTION('',(0.,0.,1.)); +#263258 = DIRECTION('',(1.,0.,-0.)); +#263259 = FACE_BOUND('',#263260,.T.); +#263260 = EDGE_LOOP('',(#263261)); +#263261 = ORIENTED_EDGE('',*,*,#263262,.T.); +#263262 = EDGE_CURVE('',#263263,#263263,#263265,.T.); +#263263 = VERTEX_POINT('',#263264); +#263264 = CARTESIAN_POINT('',(111.679042,-51.4031,-5.E-02)); +#263265 = CIRCLE('',#263266,0.487392); +#263266 = AXIS2_PLACEMENT_3D('',#263267,#263268,#263269); +#263267 = CARTESIAN_POINT('',(111.19165,-51.4031,-5.E-02)); +#263268 = DIRECTION('',(0.,0.,1.)); +#263269 = DIRECTION('',(1.,0.,-0.)); +#263270 = FACE_BOUND('',#263271,.T.); +#263271 = EDGE_LOOP('',(#263272)); +#263272 = ORIENTED_EDGE('',*,*,#263273,.T.); +#263273 = EDGE_CURVE('',#263274,#263274,#263276,.T.); +#263274 = VERTEX_POINT('',#263275); +#263275 = CARTESIAN_POINT('',(111.679042,-48.8631,-5.E-02)); +#263276 = CIRCLE('',#263277,0.487392); +#263277 = AXIS2_PLACEMENT_3D('',#263278,#263279,#263280); +#263278 = CARTESIAN_POINT('',(111.19165,-48.8631,-5.E-02)); +#263279 = DIRECTION('',(0.,0.,1.)); +#263280 = DIRECTION('',(1.,0.,-0.)); +#263281 = FACE_BOUND('',#263282,.T.); +#263282 = EDGE_LOOP('',(#263283)); +#263283 = ORIENTED_EDGE('',*,*,#263284,.T.); +#263284 = EDGE_CURVE('',#263285,#263285,#263287,.T.); +#263285 = VERTEX_POINT('',#263286); +#263286 = CARTESIAN_POINT('',(86.779112,-45.3231,-5.E-02)); +#263287 = CIRCLE('',#263288,1.587462); +#263288 = AXIS2_PLACEMENT_3D('',#263289,#263290,#263291); +#263289 = CARTESIAN_POINT('',(85.19165,-45.3231,-5.E-02)); +#263290 = DIRECTION('',(0.,0.,1.)); +#263291 = DIRECTION('',(1.,0.,-0.)); +#263292 = FACE_BOUND('',#263293,.T.); +#263293 = EDGE_LOOP('',(#263294)); +#263294 = ORIENTED_EDGE('',*,*,#263295,.T.); +#263295 = EDGE_CURVE('',#263296,#263296,#263298,.T.); +#263296 = VERTEX_POINT('',#263297); +#263297 = CARTESIAN_POINT('',(212.779112,-45.3231,-5.E-02)); +#263298 = CIRCLE('',#263299,1.587462); +#263299 = AXIS2_PLACEMENT_3D('',#263300,#263301,#263302); +#263300 = CARTESIAN_POINT('',(211.19165,-45.3231,-5.E-02)); +#263301 = DIRECTION('',(0.,0.,1.)); +#263302 = DIRECTION('',(1.,0.,-0.)); +#263303 = FACE_BOUND('',#263304,.T.); +#263304 = EDGE_LOOP('',(#263305)); +#263305 = ORIENTED_EDGE('',*,*,#263306,.T.); +#263306 = EDGE_CURVE('',#263307,#263307,#263309,.T.); +#263307 = VERTEX_POINT('',#263308); +#263308 = CARTESIAN_POINT('',(111.679042,-46.3231,-5.E-02)); +#263309 = CIRCLE('',#263310,0.487392); +#263310 = AXIS2_PLACEMENT_3D('',#263311,#263312,#263313); +#263311 = CARTESIAN_POINT('',(111.19165,-46.3231,-5.E-02)); +#263312 = DIRECTION('',(0.,0.,1.)); +#263313 = DIRECTION('',(1.,0.,-0.)); +#263314 = FACE_BOUND('',#263315,.T.); +#263315 = EDGE_LOOP('',(#263316)); +#263316 = ORIENTED_EDGE('',*,*,#263317,.T.); +#263317 = EDGE_CURVE('',#263318,#263318,#263320,.T.); +#263318 = VERTEX_POINT('',#263319); +#263319 = CARTESIAN_POINT('',(127.679042,-46.3231,-5.E-02)); +#263320 = CIRCLE('',#263321,0.487392); +#263321 = AXIS2_PLACEMENT_3D('',#263322,#263323,#263324); +#263322 = CARTESIAN_POINT('',(127.19165,-46.3231,-5.E-02)); +#263323 = DIRECTION('',(0.,0.,1.)); +#263324 = DIRECTION('',(1.,0.,-0.)); +#263325 = FACE_BOUND('',#263326,.T.); +#263326 = EDGE_LOOP('',(#263327)); +#263327 = ORIENTED_EDGE('',*,*,#263328,.T.); +#263328 = EDGE_CURVE('',#263329,#263329,#263331,.T.); +#263329 = VERTEX_POINT('',#263330); +#263330 = CARTESIAN_POINT('',(130.179042,-46.3231,-5.E-02)); +#263331 = CIRCLE('',#263332,0.487392); +#263332 = AXIS2_PLACEMENT_3D('',#263333,#263334,#263335); +#263333 = CARTESIAN_POINT('',(129.69165,-46.3231,-5.E-02)); +#263334 = DIRECTION('',(0.,0.,1.)); +#263335 = DIRECTION('',(1.,0.,-0.)); +#263336 = FACE_BOUND('',#263337,.T.); +#263337 = EDGE_LOOP('',(#263338)); +#263338 = ORIENTED_EDGE('',*,*,#263339,.T.); +#263339 = EDGE_CURVE('',#263340,#263340,#263342,.T.); +#263340 = VERTEX_POINT('',#263341); +#263341 = CARTESIAN_POINT('',(136.279042,-46.3231,-5.E-02)); +#263342 = CIRCLE('',#263343,0.487392); +#263343 = AXIS2_PLACEMENT_3D('',#263344,#263345,#263346); +#263344 = CARTESIAN_POINT('',(135.79165,-46.3231,-5.E-02)); +#263345 = DIRECTION('',(0.,0.,1.)); +#263346 = DIRECTION('',(1.,0.,-0.)); +#263347 = FACE_BOUND('',#263348,.T.); +#263348 = EDGE_LOOP('',(#263349)); +#263349 = ORIENTED_EDGE('',*,*,#263350,.T.); +#263350 = EDGE_CURVE('',#263351,#263351,#263353,.T.); +#263351 = VERTEX_POINT('',#263352); +#263352 = CARTESIAN_POINT('',(138.779042,-46.3231,-5.E-02)); +#263353 = CIRCLE('',#263354,0.487392); +#263354 = AXIS2_PLACEMENT_3D('',#263355,#263356,#263357); +#263355 = CARTESIAN_POINT('',(138.29165,-46.3231,-5.E-02)); +#263356 = DIRECTION('',(0.,0.,1.)); +#263357 = DIRECTION('',(1.,0.,-0.)); +#263358 = FACE_BOUND('',#263359,.T.); +#263359 = EDGE_LOOP('',(#263360)); +#263360 = ORIENTED_EDGE('',*,*,#263361,.T.); +#263361 = EDGE_CURVE('',#263362,#263362,#263364,.T.); +#263362 = VERTEX_POINT('',#263363); +#263363 = CARTESIAN_POINT('',(98.654042,-46.3231,-5.E-02)); +#263364 = CIRCLE('',#263365,0.462392); +#263365 = AXIS2_PLACEMENT_3D('',#263366,#263367,#263368); +#263366 = CARTESIAN_POINT('',(98.19165,-46.3231,-5.E-02)); +#263367 = DIRECTION('',(0.,0.,1.)); +#263368 = DIRECTION('',(1.,0.,-0.)); +#263369 = FACE_BOUND('',#263370,.T.); +#263370 = EDGE_LOOP('',(#263371)); +#263371 = ORIENTED_EDGE('',*,*,#263372,.T.); +#263372 = EDGE_CURVE('',#263373,#263373,#263375,.T.); +#263373 = VERTEX_POINT('',#263374); +#263374 = CARTESIAN_POINT('',(101.154042,-46.3231,-5.E-02)); +#263375 = CIRCLE('',#263376,0.462392); +#263376 = AXIS2_PLACEMENT_3D('',#263377,#263378,#263379); +#263377 = CARTESIAN_POINT('',(100.69165,-46.3231,-5.E-02)); +#263378 = DIRECTION('',(0.,0.,1.)); +#263379 = DIRECTION('',(1.,0.,-0.)); +#263380 = FACE_BOUND('',#263381,.T.); +#263381 = EDGE_LOOP('',(#263382)); +#263382 = ORIENTED_EDGE('',*,*,#263383,.T.); +#263383 = EDGE_CURVE('',#263384,#263384,#263386,.T.); +#263384 = VERTEX_POINT('',#263385); +#263385 = CARTESIAN_POINT('',(103.654042,-46.3231,-5.E-02)); +#263386 = CIRCLE('',#263387,0.462392); +#263387 = AXIS2_PLACEMENT_3D('',#263388,#263389,#263390); +#263388 = CARTESIAN_POINT('',(103.19165,-46.3231,-5.E-02)); +#263389 = DIRECTION('',(0.,0.,1.)); +#263390 = DIRECTION('',(1.,0.,-0.)); +#263391 = FACE_BOUND('',#263392,.T.); +#263392 = EDGE_LOOP('',(#263393)); +#263393 = ORIENTED_EDGE('',*,*,#263394,.T.); +#263394 = EDGE_CURVE('',#263395,#263395,#263397,.T.); +#263395 = VERTEX_POINT('',#263396); +#263396 = CARTESIAN_POINT('',(106.154042,-46.3231,-5.E-02)); +#263397 = CIRCLE('',#263398,0.462392); +#263398 = AXIS2_PLACEMENT_3D('',#263399,#263400,#263401); +#263399 = CARTESIAN_POINT('',(105.69165,-46.3231,-5.E-02)); +#263400 = DIRECTION('',(0.,0.,1.)); +#263401 = DIRECTION('',(1.,0.,-0.)); +#263402 = FACE_BOUND('',#263403,.T.); +#263403 = EDGE_LOOP('',(#263404)); +#263404 = ORIENTED_EDGE('',*,*,#263405,.T.); +#263405 = EDGE_CURVE('',#263406,#263406,#263408,.T.); +#263406 = VERTEX_POINT('',#263407); +#263407 = CARTESIAN_POINT('',(116.654042,-46.3231,-5.E-02)); +#263408 = CIRCLE('',#263409,0.462392); +#263409 = AXIS2_PLACEMENT_3D('',#263410,#263411,#263412); +#263410 = CARTESIAN_POINT('',(116.19165,-46.3231,-5.E-02)); +#263411 = DIRECTION('',(0.,0.,1.)); +#263412 = DIRECTION('',(1.,0.,-0.)); +#263413 = FACE_BOUND('',#263414,.T.); +#263414 = EDGE_LOOP('',(#263415)); +#263415 = ORIENTED_EDGE('',*,*,#263416,.T.); +#263416 = EDGE_CURVE('',#263417,#263417,#263419,.T.); +#263417 = VERTEX_POINT('',#263418); +#263418 = CARTESIAN_POINT('',(119.154042,-46.3231,-5.E-02)); +#263419 = CIRCLE('',#263420,0.462392); +#263420 = AXIS2_PLACEMENT_3D('',#263421,#263422,#263423); +#263421 = CARTESIAN_POINT('',(118.69165,-46.3231,-5.E-02)); +#263422 = DIRECTION('',(0.,0.,1.)); +#263423 = DIRECTION('',(1.,0.,-0.)); +#263424 = FACE_BOUND('',#263425,.T.); +#263425 = EDGE_LOOP('',(#263426)); +#263426 = ORIENTED_EDGE('',*,*,#263427,.T.); +#263427 = EDGE_CURVE('',#263428,#263428,#263430,.T.); +#263428 = VERTEX_POINT('',#263429); +#263429 = CARTESIAN_POINT('',(121.654042,-46.3231,-5.E-02)); +#263430 = CIRCLE('',#263431,0.462392); +#263431 = AXIS2_PLACEMENT_3D('',#263432,#263433,#263434); +#263432 = CARTESIAN_POINT('',(121.19165,-46.3231,-5.E-02)); +#263433 = DIRECTION('',(0.,0.,1.)); +#263434 = DIRECTION('',(1.,0.,-0.)); +#263435 = PLANE('',#263436); +#263436 = AXIS2_PLACEMENT_3D('',#263437,#263438,#263439); +#263437 = CARTESIAN_POINT('',(0.,0.,-5.E-02)); +#263438 = DIRECTION('',(-0.,-0.,-1.)); +#263439 = DIRECTION('',(-1.,0.,0.)); +#263440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#263444)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#263441,#263442,#263443)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#263441 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#263442 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#263443 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#263444 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#263441, + 'distance_accuracy_value','confusion accuracy'); +#263445 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#263446,#263448); +#263446 = ( REPRESENTATION_RELATIONSHIP('','',#261447,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#263447) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#263447 = ITEM_DEFINED_TRANSFORMATION('','',#11,#507); +#263448 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #263449); +#263449 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('161','=>[0:1:1:72]','',#5, + #261442,$); +#263450 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#261444)); +#263451 = SHAPE_DEFINITION_REPRESENTATION(#263452,#263458); +#263452 = PRODUCT_DEFINITION_SHAPE('','',#263453); +#263453 = PRODUCT_DEFINITION('design','',#263454,#263457); +#263454 = PRODUCT_DEFINITION_FORMATION('','',#263455); +#263455 = PRODUCT('hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_PCB', + 'hbox-watchdog-v3-PROD-unsaved-export-3wVCBy_PCB','',(#263456)); +#263456 = PRODUCT_CONTEXT('',#2,'mechanical'); +#263457 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#263458 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#263459),#270331); +#263459 = MANIFOLD_SOLID_BREP('',#263460); +#263460 = CLOSED_SHELL('',(#263461,#263501,#263532,#263563,#265462, + #267361,#267373,#267390,#267407,#267424,#267441,#267458,#267475, + #267492,#267509,#267526,#267543,#267560,#267577,#267594,#267616, + #267633,#267650,#267662,#267679,#267696,#267718,#267735,#267752, + #267764,#267781,#267798,#267815,#267832,#267849,#267866,#267883, + #267900,#267922,#267939,#267956,#267968,#267985,#268002,#268019, + #268036,#268053,#268070,#268092,#268109,#268126,#268138,#268155, + #268172,#268189,#268206,#268223,#268240,#268257,#268274,#268291, + #268308,#268325,#268342,#268359,#268376,#268393,#268410,#268427, + #268444,#268461,#268478,#268495,#268512,#268529,#268546,#268563, + #268580,#268597,#268614,#268631,#268648,#268665,#268682,#268699, + #268716,#268733,#268750,#268767,#268784,#268801,#268818,#268835, + #268852,#268869,#268886,#268903,#268920,#268937,#268954,#268971, + #268988,#269005,#269022,#269039,#269056,#269073,#269090,#269107, + #269124,#269141,#269158,#269175,#269192,#269209,#269226,#269243, + #269260,#269277,#269294,#269311,#269328,#269345,#269362,#269379, + #269396,#269413,#269430,#269447,#269464,#269481,#269498,#269515, + #269532,#269549,#269566,#269583,#269600,#269617,#269634,#269651, + #269668,#269685,#269702,#269719,#269736,#269753,#269770,#269787, + #269804,#269821,#269838,#269855,#269872,#269889,#269906,#269923, + #269940,#269957,#269974,#269991,#270008,#270025,#270042,#270059, + #270076,#270093,#270110,#270127,#270144,#270161,#270178,#270195, + #270212,#270229,#270246,#270263,#270280,#270297,#270314)); +#263461 = ADVANCED_FACE('',(#263462),#263496,.T.); +#263462 = FACE_BOUND('',#263463,.T.); +#263463 = EDGE_LOOP('',(#263464,#263474,#263482,#263490)); +#263464 = ORIENTED_EDGE('',*,*,#263465,.T.); +#263465 = EDGE_CURVE('',#263466,#263468,#263470,.T.); +#263466 = VERTEX_POINT('',#263467); +#263467 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263468 = VERTEX_POINT('',#263469); +#263469 = CARTESIAN_POINT('',(215.19165,-140.3231,1.51)); +#263470 = LINE('',#263471,#263472); +#263471 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263472 = VECTOR('',#263473,1.); +#263473 = DIRECTION('',(0.,0.,1.)); +#263474 = ORIENTED_EDGE('',*,*,#263475,.T.); +#263475 = EDGE_CURVE('',#263468,#263476,#263478,.T.); +#263476 = VERTEX_POINT('',#263477); +#263477 = CARTESIAN_POINT('',(80.19165,-140.3231,1.51)); +#263478 = LINE('',#263479,#263480); +#263479 = CARTESIAN_POINT('',(215.19165,-140.3231,1.51)); +#263480 = VECTOR('',#263481,1.); +#263481 = DIRECTION('',(-1.,0.,0.)); +#263482 = ORIENTED_EDGE('',*,*,#263483,.F.); +#263483 = EDGE_CURVE('',#263484,#263476,#263486,.T.); +#263484 = VERTEX_POINT('',#263485); +#263485 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263486 = LINE('',#263487,#263488); +#263487 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263488 = VECTOR('',#263489,1.); +#263489 = DIRECTION('',(0.,0.,1.)); +#263490 = ORIENTED_EDGE('',*,*,#263491,.F.); +#263491 = EDGE_CURVE('',#263466,#263484,#263492,.T.); +#263492 = LINE('',#263493,#263494); +#263493 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263494 = VECTOR('',#263495,1.); +#263495 = DIRECTION('',(-1.,0.,0.)); +#263496 = PLANE('',#263497); +#263497 = AXIS2_PLACEMENT_3D('',#263498,#263499,#263500); +#263498 = CARTESIAN_POINT('',(215.19165,-140.3231,0.)); +#263499 = DIRECTION('',(0.,-1.,0.)); +#263500 = DIRECTION('',(-1.,0.,0.)); +#263501 = ADVANCED_FACE('',(#263502),#263527,.T.); +#263502 = FACE_BOUND('',#263503,.T.); +#263503 = EDGE_LOOP('',(#263504,#263514,#263520,#263521)); +#263504 = ORIENTED_EDGE('',*,*,#263505,.T.); +#263505 = EDGE_CURVE('',#263506,#263508,#263510,.T.); +#263506 = VERTEX_POINT('',#263507); +#263507 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263508 = VERTEX_POINT('',#263509); +#263509 = CARTESIAN_POINT('',(215.19165,-40.3231,1.51)); +#263510 = LINE('',#263511,#263512); +#263511 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263512 = VECTOR('',#263513,1.); +#263513 = DIRECTION('',(0.,0.,1.)); +#263514 = ORIENTED_EDGE('',*,*,#263515,.T.); +#263515 = EDGE_CURVE('',#263508,#263468,#263516,.T.); +#263516 = LINE('',#263517,#263518); +#263517 = CARTESIAN_POINT('',(215.19165,-40.3231,1.51)); +#263518 = VECTOR('',#263519,1.); +#263519 = DIRECTION('',(0.,-1.,0.)); +#263520 = ORIENTED_EDGE('',*,*,#263465,.F.); +#263521 = ORIENTED_EDGE('',*,*,#263522,.F.); +#263522 = EDGE_CURVE('',#263506,#263466,#263523,.T.); +#263523 = LINE('',#263524,#263525); +#263524 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263525 = VECTOR('',#263526,1.); +#263526 = DIRECTION('',(0.,-1.,0.)); +#263527 = PLANE('',#263528); +#263528 = AXIS2_PLACEMENT_3D('',#263529,#263530,#263531); +#263529 = CARTESIAN_POINT('',(215.19165,-40.3231,0.)); +#263530 = DIRECTION('',(1.,0.,-0.)); +#263531 = DIRECTION('',(0.,-1.,0.)); +#263532 = ADVANCED_FACE('',(#263533),#263558,.T.); +#263533 = FACE_BOUND('',#263534,.T.); +#263534 = EDGE_LOOP('',(#263535,#263536,#263544,#263552)); +#263535 = ORIENTED_EDGE('',*,*,#263483,.T.); +#263536 = ORIENTED_EDGE('',*,*,#263537,.T.); +#263537 = EDGE_CURVE('',#263476,#263538,#263540,.T.); +#263538 = VERTEX_POINT('',#263539); +#263539 = CARTESIAN_POINT('',(80.19165,-40.3231,1.51)); +#263540 = LINE('',#263541,#263542); +#263541 = CARTESIAN_POINT('',(80.19165,-140.3231,1.51)); +#263542 = VECTOR('',#263543,1.); +#263543 = DIRECTION('',(0.,1.,0.)); +#263544 = ORIENTED_EDGE('',*,*,#263545,.F.); +#263545 = EDGE_CURVE('',#263546,#263538,#263548,.T.); +#263546 = VERTEX_POINT('',#263547); +#263547 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#263548 = LINE('',#263549,#263550); +#263549 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#263550 = VECTOR('',#263551,1.); +#263551 = DIRECTION('',(0.,0.,1.)); +#263552 = ORIENTED_EDGE('',*,*,#263553,.F.); +#263553 = EDGE_CURVE('',#263484,#263546,#263554,.T.); +#263554 = LINE('',#263555,#263556); +#263555 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263556 = VECTOR('',#263557,1.); +#263557 = DIRECTION('',(0.,1.,0.)); +#263558 = PLANE('',#263559); +#263559 = AXIS2_PLACEMENT_3D('',#263560,#263561,#263562); +#263560 = CARTESIAN_POINT('',(80.19165,-140.3231,0.)); +#263561 = DIRECTION('',(-1.,0.,0.)); +#263562 = DIRECTION('',(0.,1.,0.)); +#263563 = ADVANCED_FACE('',(#263564,#263575,#263586,#263597,#263608, + #263619,#263630,#263641,#263652,#263663,#263674,#263685,#263696, + #263707,#263718,#263754,#263765,#263776,#263812,#263823,#263834, + #263845,#263856,#263867,#263878,#263889,#263900,#263936,#263947, + #263958,#263969,#263980,#263991,#264002,#264038,#264049,#264060, + #264071,#264082,#264093,#264104,#264115,#264126,#264137,#264148, + #264159,#264170,#264181,#264192,#264203,#264214,#264225,#264236, + #264247,#264258,#264269,#264280,#264291,#264302,#264313,#264324, + #264335,#264346,#264357,#264368,#264379,#264390,#264401,#264412, + #264423,#264434,#264445,#264456,#264467,#264478,#264489,#264500, + #264511,#264522,#264533,#264544,#264555,#264566,#264577,#264588, + #264599,#264610,#264621,#264632,#264643,#264654,#264665,#264676, + #264687,#264698,#264709,#264720,#264731,#264742,#264753,#264764, + #264775,#264786,#264797,#264808,#264819,#264830,#264841,#264852, + #264863,#264874,#264885,#264896,#264907,#264918,#264929,#264940, + #264951,#264962,#264973,#264984,#264995,#265006,#265017,#265028, + #265039,#265050,#265061,#265072,#265083,#265094,#265105,#265116, + #265127,#265138,#265149,#265160,#265171,#265182,#265193,#265204, + #265215,#265226,#265237,#265248,#265259,#265270,#265281,#265292, + #265303,#265314,#265325,#265336,#265347,#265358,#265369,#265380, + #265391,#265402,#265413,#265424,#265435,#265446),#265457,.F.); +#263564 = FACE_BOUND('',#263565,.F.); +#263565 = EDGE_LOOP('',(#263566,#263567,#263568,#263574)); +#263566 = ORIENTED_EDGE('',*,*,#263491,.F.); +#263567 = ORIENTED_EDGE('',*,*,#263522,.F.); +#263568 = ORIENTED_EDGE('',*,*,#263569,.F.); +#263569 = EDGE_CURVE('',#263546,#263506,#263570,.T.); +#263570 = LINE('',#263571,#263572); +#263571 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#263572 = VECTOR('',#263573,1.); +#263573 = DIRECTION('',(1.,0.,0.)); +#263574 = ORIENTED_EDGE('',*,*,#263553,.F.); +#263575 = FACE_BOUND('',#263576,.F.); +#263576 = EDGE_LOOP('',(#263577)); +#263577 = ORIENTED_EDGE('',*,*,#263578,.T.); +#263578 = EDGE_CURVE('',#263579,#263579,#263581,.T.); +#263579 = VERTEX_POINT('',#263580); +#263580 = CARTESIAN_POINT('',(85.19165,-136.9231,0.)); +#263581 = CIRCLE('',#263582,1.6); +#263582 = AXIS2_PLACEMENT_3D('',#263583,#263584,#263585); +#263583 = CARTESIAN_POINT('',(85.19165,-135.3231,0.)); +#263584 = DIRECTION('',(-0.,0.,-1.)); +#263585 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#263586 = FACE_BOUND('',#263587,.F.); +#263587 = EDGE_LOOP('',(#263588)); +#263588 = ORIENTED_EDGE('',*,*,#263589,.T.); +#263589 = EDGE_CURVE('',#263590,#263590,#263592,.T.); +#263590 = VERTEX_POINT('',#263591); +#263591 = CARTESIAN_POINT('',(115.25165,-130.0831,0.)); +#263592 = CIRCLE('',#263593,0.5); +#263593 = AXIS2_PLACEMENT_3D('',#263594,#263595,#263596); +#263594 = CARTESIAN_POINT('',(115.25165,-129.5831,0.)); +#263595 = DIRECTION('',(-0.,0.,-1.)); +#263596 = DIRECTION('',(-0.,-1.,0.)); +#263597 = FACE_BOUND('',#263598,.F.); +#263598 = EDGE_LOOP('',(#263599)); +#263599 = ORIENTED_EDGE('',*,*,#263600,.T.); +#263600 = EDGE_CURVE('',#263601,#263601,#263603,.T.); +#263601 = VERTEX_POINT('',#263602); +#263602 = CARTESIAN_POINT('',(117.79165,-130.0831,0.)); +#263603 = CIRCLE('',#263604,0.5); +#263604 = AXIS2_PLACEMENT_3D('',#263605,#263606,#263607); +#263605 = CARTESIAN_POINT('',(117.79165,-129.5831,0.)); +#263606 = DIRECTION('',(-0.,0.,-1.)); +#263607 = DIRECTION('',(-0.,-1.,0.)); +#263608 = FACE_BOUND('',#263609,.F.); +#263609 = EDGE_LOOP('',(#263610)); +#263610 = ORIENTED_EDGE('',*,*,#263611,.T.); +#263611 = EDGE_CURVE('',#263612,#263612,#263614,.T.); +#263612 = VERTEX_POINT('',#263613); +#263613 = CARTESIAN_POINT('',(120.33165,-130.0831,0.)); +#263614 = CIRCLE('',#263615,0.5); +#263615 = AXIS2_PLACEMENT_3D('',#263616,#263617,#263618); +#263616 = CARTESIAN_POINT('',(120.33165,-129.5831,0.)); +#263617 = DIRECTION('',(-0.,0.,-1.)); +#263618 = DIRECTION('',(-0.,-1.,0.)); +#263619 = FACE_BOUND('',#263620,.F.); +#263620 = EDGE_LOOP('',(#263621)); +#263621 = ORIENTED_EDGE('',*,*,#263622,.T.); +#263622 = EDGE_CURVE('',#263623,#263623,#263625,.T.); +#263623 = VERTEX_POINT('',#263624); +#263624 = CARTESIAN_POINT('',(122.87165,-130.0831,0.)); +#263625 = CIRCLE('',#263626,0.5); +#263626 = AXIS2_PLACEMENT_3D('',#263627,#263628,#263629); +#263627 = CARTESIAN_POINT('',(122.87165,-129.5831,0.)); +#263628 = DIRECTION('',(-0.,0.,-1.)); +#263629 = DIRECTION('',(-0.,-1.,0.)); +#263630 = FACE_BOUND('',#263631,.F.); +#263631 = EDGE_LOOP('',(#263632)); +#263632 = ORIENTED_EDGE('',*,*,#263633,.T.); +#263633 = EDGE_CURVE('',#263634,#263634,#263636,.T.); +#263634 = VERTEX_POINT('',#263635); +#263635 = CARTESIAN_POINT('',(125.41165,-130.0831,0.)); +#263636 = CIRCLE('',#263637,0.5); +#263637 = AXIS2_PLACEMENT_3D('',#263638,#263639,#263640); +#263638 = CARTESIAN_POINT('',(125.41165,-129.5831,0.)); +#263639 = DIRECTION('',(-0.,0.,-1.)); +#263640 = DIRECTION('',(-0.,-1.,0.)); +#263641 = FACE_BOUND('',#263642,.F.); +#263642 = EDGE_LOOP('',(#263643)); +#263643 = ORIENTED_EDGE('',*,*,#263644,.T.); +#263644 = EDGE_CURVE('',#263645,#263645,#263647,.T.); +#263645 = VERTEX_POINT('',#263646); +#263646 = CARTESIAN_POINT('',(127.95165,-130.0831,0.)); +#263647 = CIRCLE('',#263648,0.5); +#263648 = AXIS2_PLACEMENT_3D('',#263649,#263650,#263651); +#263649 = CARTESIAN_POINT('',(127.95165,-129.5831,0.)); +#263650 = DIRECTION('',(-0.,0.,-1.)); +#263651 = DIRECTION('',(-0.,-1.,0.)); +#263652 = FACE_BOUND('',#263653,.F.); +#263653 = EDGE_LOOP('',(#263654)); +#263654 = ORIENTED_EDGE('',*,*,#263655,.T.); +#263655 = EDGE_CURVE('',#263656,#263656,#263658,.T.); +#263656 = VERTEX_POINT('',#263657); +#263657 = CARTESIAN_POINT('',(130.49165,-130.0831,0.)); +#263658 = CIRCLE('',#263659,0.5); +#263659 = AXIS2_PLACEMENT_3D('',#263660,#263661,#263662); +#263660 = CARTESIAN_POINT('',(130.49165,-129.5831,0.)); +#263661 = DIRECTION('',(-0.,0.,-1.)); +#263662 = DIRECTION('',(-0.,-1.,0.)); +#263663 = FACE_BOUND('',#263664,.F.); +#263664 = EDGE_LOOP('',(#263665)); +#263665 = ORIENTED_EDGE('',*,*,#263666,.T.); +#263666 = EDGE_CURVE('',#263667,#263667,#263669,.T.); +#263667 = VERTEX_POINT('',#263668); +#263668 = CARTESIAN_POINT('',(133.03165,-130.0831,0.)); +#263669 = CIRCLE('',#263670,0.5); +#263670 = AXIS2_PLACEMENT_3D('',#263671,#263672,#263673); +#263671 = CARTESIAN_POINT('',(133.03165,-129.5831,0.)); +#263672 = DIRECTION('',(-0.,0.,-1.)); +#263673 = DIRECTION('',(-0.,-1.,0.)); +#263674 = FACE_BOUND('',#263675,.F.); +#263675 = EDGE_LOOP('',(#263676)); +#263676 = ORIENTED_EDGE('',*,*,#263677,.T.); +#263677 = EDGE_CURVE('',#263678,#263678,#263680,.T.); +#263678 = VERTEX_POINT('',#263679); +#263679 = CARTESIAN_POINT('',(138.11165,-130.0831,0.)); +#263680 = CIRCLE('',#263681,0.5); +#263681 = AXIS2_PLACEMENT_3D('',#263682,#263683,#263684); +#263682 = CARTESIAN_POINT('',(138.11165,-129.5831,0.)); +#263683 = DIRECTION('',(-0.,0.,-1.)); +#263684 = DIRECTION('',(-0.,-1.,0.)); +#263685 = FACE_BOUND('',#263686,.F.); +#263686 = EDGE_LOOP('',(#263687)); +#263687 = ORIENTED_EDGE('',*,*,#263688,.T.); +#263688 = EDGE_CURVE('',#263689,#263689,#263691,.T.); +#263689 = VERTEX_POINT('',#263690); +#263690 = CARTESIAN_POINT('',(140.65165,-130.0831,0.)); +#263691 = CIRCLE('',#263692,0.5); +#263692 = AXIS2_PLACEMENT_3D('',#263693,#263694,#263695); +#263693 = CARTESIAN_POINT('',(140.65165,-129.5831,0.)); +#263694 = DIRECTION('',(-0.,0.,-1.)); +#263695 = DIRECTION('',(-0.,-1.,0.)); +#263696 = FACE_BOUND('',#263697,.F.); +#263697 = EDGE_LOOP('',(#263698)); +#263698 = ORIENTED_EDGE('',*,*,#263699,.T.); +#263699 = EDGE_CURVE('',#263700,#263700,#263702,.T.); +#263700 = VERTEX_POINT('',#263701); +#263701 = CARTESIAN_POINT('',(143.19165,-130.0831,0.)); +#263702 = CIRCLE('',#263703,0.5); +#263703 = AXIS2_PLACEMENT_3D('',#263704,#263705,#263706); +#263704 = CARTESIAN_POINT('',(143.19165,-129.5831,0.)); +#263705 = DIRECTION('',(-0.,0.,-1.)); +#263706 = DIRECTION('',(-0.,-1.,0.)); +#263707 = FACE_BOUND('',#263708,.F.); +#263708 = EDGE_LOOP('',(#263709)); +#263709 = ORIENTED_EDGE('',*,*,#263710,.T.); +#263710 = EDGE_CURVE('',#263711,#263711,#263713,.T.); +#263711 = VERTEX_POINT('',#263712); +#263712 = CARTESIAN_POINT('',(145.73165,-130.0831,0.)); +#263713 = CIRCLE('',#263714,0.5); +#263714 = AXIS2_PLACEMENT_3D('',#263715,#263716,#263717); +#263715 = CARTESIAN_POINT('',(145.73165,-129.5831,0.)); +#263716 = DIRECTION('',(-0.,0.,-1.)); +#263717 = DIRECTION('',(-0.,-1.,0.)); +#263718 = FACE_BOUND('',#263719,.F.); +#263719 = EDGE_LOOP('',(#263720,#263731,#263739,#263748)); +#263720 = ORIENTED_EDGE('',*,*,#263721,.T.); +#263721 = EDGE_CURVE('',#263722,#263724,#263726,.T.); +#263722 = VERTEX_POINT('',#263723); +#263723 = CARTESIAN_POINT('',(160.125,-134.185,0.)); +#263724 = VERTEX_POINT('',#263725); +#263725 = CARTESIAN_POINT('',(159.525,-134.185,0.)); +#263726 = CIRCLE('',#263727,0.3); +#263727 = AXIS2_PLACEMENT_3D('',#263728,#263729,#263730); +#263728 = CARTESIAN_POINT('',(159.825,-134.185,0.)); +#263729 = DIRECTION('',(-0.,0.,-1.)); +#263730 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#263731 = ORIENTED_EDGE('',*,*,#263732,.T.); +#263732 = EDGE_CURVE('',#263724,#263733,#263735,.T.); +#263733 = VERTEX_POINT('',#263734); +#263734 = CARTESIAN_POINT('',(159.525,-133.385,0.)); +#263735 = LINE('',#263736,#263737); +#263736 = CARTESIAN_POINT('',(159.525,-66.6925,0.)); +#263737 = VECTOR('',#263738,1.); +#263738 = DIRECTION('',(-0.,1.,0.)); +#263739 = ORIENTED_EDGE('',*,*,#263740,.T.); +#263740 = EDGE_CURVE('',#263733,#263741,#263743,.T.); +#263741 = VERTEX_POINT('',#263742); +#263742 = CARTESIAN_POINT('',(160.125,-133.385,0.)); +#263743 = CIRCLE('',#263744,0.3); +#263744 = AXIS2_PLACEMENT_3D('',#263745,#263746,#263747); +#263745 = CARTESIAN_POINT('',(159.825,-133.385,0.)); +#263746 = DIRECTION('',(0.,-0.,-1.)); +#263747 = DIRECTION('',(1.,9.473903143469E-14,-0.)); +#263748 = ORIENTED_EDGE('',*,*,#263749,.T.); +#263749 = EDGE_CURVE('',#263741,#263722,#263750,.T.); +#263750 = LINE('',#263751,#263752); +#263751 = CARTESIAN_POINT('',(160.125,-67.0925,0.)); +#263752 = VECTOR('',#263753,1.); +#263753 = DIRECTION('',(0.,-1.,0.)); +#263754 = FACE_BOUND('',#263755,.F.); +#263755 = EDGE_LOOP('',(#263756)); +#263756 = ORIENTED_EDGE('',*,*,#263757,.T.); +#263757 = EDGE_CURVE('',#263758,#263758,#263760,.T.); +#263758 = VERTEX_POINT('',#263759); +#263759 = CARTESIAN_POINT('',(148.27165,-130.0831,0.)); +#263760 = CIRCLE('',#263761,0.5); +#263761 = AXIS2_PLACEMENT_3D('',#263762,#263763,#263764); +#263762 = CARTESIAN_POINT('',(148.27165,-129.5831,0.)); +#263763 = DIRECTION('',(-0.,0.,-1.)); +#263764 = DIRECTION('',(-0.,-1.,0.)); +#263765 = FACE_BOUND('',#263766,.F.); +#263766 = EDGE_LOOP('',(#263767)); +#263767 = ORIENTED_EDGE('',*,*,#263768,.T.); +#263768 = EDGE_CURVE('',#263769,#263769,#263771,.T.); +#263769 = VERTEX_POINT('',#263770); +#263770 = CARTESIAN_POINT('',(150.81165,-130.0831,0.)); +#263771 = CIRCLE('',#263772,0.5); +#263772 = AXIS2_PLACEMENT_3D('',#263773,#263774,#263775); +#263773 = CARTESIAN_POINT('',(150.81165,-129.5831,0.)); +#263774 = DIRECTION('',(-0.,0.,-1.)); +#263775 = DIRECTION('',(-0.,-1.,0.)); +#263776 = FACE_BOUND('',#263777,.F.); +#263777 = EDGE_LOOP('',(#263778,#263789,#263797,#263806)); +#263778 = ORIENTED_EDGE('',*,*,#263779,.T.); +#263779 = EDGE_CURVE('',#263780,#263782,#263784,.T.); +#263780 = VERTEX_POINT('',#263781); +#263781 = CARTESIAN_POINT('',(160.125,-131.155,0.)); +#263782 = VERTEX_POINT('',#263783); +#263783 = CARTESIAN_POINT('',(159.525,-131.155,0.)); +#263784 = CIRCLE('',#263785,0.3); +#263785 = AXIS2_PLACEMENT_3D('',#263786,#263787,#263788); +#263786 = CARTESIAN_POINT('',(159.825,-131.155,0.)); +#263787 = DIRECTION('',(-0.,0.,-1.)); +#263788 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#263789 = ORIENTED_EDGE('',*,*,#263790,.T.); +#263790 = EDGE_CURVE('',#263782,#263791,#263793,.T.); +#263791 = VERTEX_POINT('',#263792); +#263792 = CARTESIAN_POINT('',(159.525,-129.655,0.)); +#263793 = LINE('',#263794,#263795); +#263794 = CARTESIAN_POINT('',(159.525,-64.8275,0.)); +#263795 = VECTOR('',#263796,1.); +#263796 = DIRECTION('',(-0.,1.,0.)); +#263797 = ORIENTED_EDGE('',*,*,#263798,.T.); +#263798 = EDGE_CURVE('',#263791,#263799,#263801,.T.); +#263799 = VERTEX_POINT('',#263800); +#263800 = CARTESIAN_POINT('',(160.125,-129.655,0.)); +#263801 = CIRCLE('',#263802,0.3); +#263802 = AXIS2_PLACEMENT_3D('',#263803,#263804,#263805); +#263803 = CARTESIAN_POINT('',(159.825,-129.655,0.)); +#263804 = DIRECTION('',(0.,-0.,-1.)); +#263805 = DIRECTION('',(1.,-9.473903143469E-14,0.)); +#263806 = ORIENTED_EDGE('',*,*,#263807,.T.); +#263807 = EDGE_CURVE('',#263799,#263780,#263808,.T.); +#263808 = LINE('',#263809,#263810); +#263809 = CARTESIAN_POINT('',(160.125,-65.5775,0.)); +#263810 = VECTOR('',#263811,1.); +#263811 = DIRECTION('',(0.,-1.,0.)); +#263812 = FACE_BOUND('',#263813,.F.); +#263813 = EDGE_LOOP('',(#263814)); +#263814 = ORIENTED_EDGE('',*,*,#263815,.T.); +#263815 = EDGE_CURVE('',#263816,#263816,#263818,.T.); +#263816 = VERTEX_POINT('',#263817); +#263817 = CARTESIAN_POINT('',(161.175,-130.975,0.)); +#263818 = CIRCLE('',#263819,0.2); +#263819 = AXIS2_PLACEMENT_3D('',#263820,#263821,#263822); +#263820 = CARTESIAN_POINT('',(161.175,-130.775,0.)); +#263821 = DIRECTION('',(-0.,0.,-1.)); +#263822 = DIRECTION('',(-0.,-1.,0.)); +#263823 = FACE_BOUND('',#263824,.F.); +#263824 = EDGE_LOOP('',(#263825)); +#263825 = ORIENTED_EDGE('',*,*,#263826,.T.); +#263826 = EDGE_CURVE('',#263827,#263827,#263829,.T.); +#263827 = VERTEX_POINT('',#263828); +#263828 = CARTESIAN_POINT('',(162.025,-130.975,0.)); +#263829 = CIRCLE('',#263830,0.2); +#263830 = AXIS2_PLACEMENT_3D('',#263831,#263832,#263833); +#263831 = CARTESIAN_POINT('',(162.025,-130.775,0.)); +#263832 = DIRECTION('',(-0.,0.,-1.)); +#263833 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#263834 = FACE_BOUND('',#263835,.F.); +#263835 = EDGE_LOOP('',(#263836)); +#263836 = ORIENTED_EDGE('',*,*,#263837,.T.); +#263837 = EDGE_CURVE('',#263838,#263838,#263840,.T.); +#263838 = VERTEX_POINT('',#263839); +#263839 = CARTESIAN_POINT('',(162.875,-130.975,0.)); +#263840 = CIRCLE('',#263841,0.2); +#263841 = AXIS2_PLACEMENT_3D('',#263842,#263843,#263844); +#263842 = CARTESIAN_POINT('',(162.875,-130.775,0.)); +#263843 = DIRECTION('',(-0.,0.,-1.)); +#263844 = DIRECTION('',(-0.,-1.,0.)); +#263845 = FACE_BOUND('',#263846,.F.); +#263846 = EDGE_LOOP('',(#263847)); +#263847 = ORIENTED_EDGE('',*,*,#263848,.T.); +#263848 = EDGE_CURVE('',#263849,#263849,#263851,.T.); +#263849 = VERTEX_POINT('',#263850); +#263850 = CARTESIAN_POINT('',(163.725,-130.975,0.)); +#263851 = CIRCLE('',#263852,0.2); +#263852 = AXIS2_PLACEMENT_3D('',#263853,#263854,#263855); +#263853 = CARTESIAN_POINT('',(163.725,-130.775,0.)); +#263854 = DIRECTION('',(-0.,0.,-1.)); +#263855 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#263856 = FACE_BOUND('',#263857,.F.); +#263857 = EDGE_LOOP('',(#263858)); +#263858 = ORIENTED_EDGE('',*,*,#263859,.T.); +#263859 = EDGE_CURVE('',#263860,#263860,#263862,.T.); +#263860 = VERTEX_POINT('',#263861); +#263861 = CARTESIAN_POINT('',(161.175,-129.625,0.)); +#263862 = CIRCLE('',#263863,0.2); +#263863 = AXIS2_PLACEMENT_3D('',#263864,#263865,#263866); +#263864 = CARTESIAN_POINT('',(161.175,-129.425,0.)); +#263865 = DIRECTION('',(-0.,0.,-1.)); +#263866 = DIRECTION('',(-0.,-1.,0.)); +#263867 = FACE_BOUND('',#263868,.F.); +#263868 = EDGE_LOOP('',(#263869)); +#263869 = ORIENTED_EDGE('',*,*,#263870,.T.); +#263870 = EDGE_CURVE('',#263871,#263871,#263873,.T.); +#263871 = VERTEX_POINT('',#263872); +#263872 = CARTESIAN_POINT('',(162.025,-129.625,0.)); +#263873 = CIRCLE('',#263874,0.2); +#263874 = AXIS2_PLACEMENT_3D('',#263875,#263876,#263877); +#263875 = CARTESIAN_POINT('',(162.025,-129.425,0.)); +#263876 = DIRECTION('',(-0.,0.,-1.)); +#263877 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#263878 = FACE_BOUND('',#263879,.F.); +#263879 = EDGE_LOOP('',(#263880)); +#263880 = ORIENTED_EDGE('',*,*,#263881,.T.); +#263881 = EDGE_CURVE('',#263882,#263882,#263884,.T.); +#263882 = VERTEX_POINT('',#263883); +#263883 = CARTESIAN_POINT('',(162.875,-129.625,0.)); +#263884 = CIRCLE('',#263885,0.2); +#263885 = AXIS2_PLACEMENT_3D('',#263886,#263887,#263888); +#263886 = CARTESIAN_POINT('',(162.875,-129.425,0.)); +#263887 = DIRECTION('',(-0.,0.,-1.)); +#263888 = DIRECTION('',(-0.,-1.,0.)); +#263889 = FACE_BOUND('',#263890,.F.); +#263890 = EDGE_LOOP('',(#263891)); +#263891 = ORIENTED_EDGE('',*,*,#263892,.T.); +#263892 = EDGE_CURVE('',#263893,#263893,#263895,.T.); +#263893 = VERTEX_POINT('',#263894); +#263894 = CARTESIAN_POINT('',(163.725,-129.625,0.)); +#263895 = CIRCLE('',#263896,0.2); +#263896 = AXIS2_PLACEMENT_3D('',#263897,#263898,#263899); +#263897 = CARTESIAN_POINT('',(163.725,-129.425,0.)); +#263898 = DIRECTION('',(-0.,0.,-1.)); +#263899 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#263900 = FACE_BOUND('',#263901,.F.); +#263901 = EDGE_LOOP('',(#263902,#263913,#263921,#263930)); +#263902 = ORIENTED_EDGE('',*,*,#263903,.T.); +#263903 = EDGE_CURVE('',#263904,#263906,#263908,.T.); +#263904 = VERTEX_POINT('',#263905); +#263905 = CARTESIAN_POINT('',(168.775,-134.185,0.)); +#263906 = VERTEX_POINT('',#263907); +#263907 = CARTESIAN_POINT('',(168.175,-134.185,0.)); +#263908 = CIRCLE('',#263909,0.3); +#263909 = AXIS2_PLACEMENT_3D('',#263910,#263911,#263912); +#263910 = CARTESIAN_POINT('',(168.475,-134.185,0.)); +#263911 = DIRECTION('',(-0.,0.,-1.)); +#263912 = DIRECTION('',(-1.,0.,0.)); +#263913 = ORIENTED_EDGE('',*,*,#263914,.T.); +#263914 = EDGE_CURVE('',#263906,#263915,#263917,.T.); +#263915 = VERTEX_POINT('',#263916); +#263916 = CARTESIAN_POINT('',(168.175,-133.385,0.)); +#263917 = LINE('',#263918,#263919); +#263918 = CARTESIAN_POINT('',(168.175,-66.6925,0.)); +#263919 = VECTOR('',#263920,1.); +#263920 = DIRECTION('',(-0.,1.,0.)); +#263921 = ORIENTED_EDGE('',*,*,#263922,.T.); +#263922 = EDGE_CURVE('',#263915,#263923,#263925,.T.); +#263923 = VERTEX_POINT('',#263924); +#263924 = CARTESIAN_POINT('',(168.775,-133.385,0.)); +#263925 = CIRCLE('',#263926,0.3); +#263926 = AXIS2_PLACEMENT_3D('',#263927,#263928,#263929); +#263927 = CARTESIAN_POINT('',(168.475,-133.385,0.)); +#263928 = DIRECTION('',(0.,-0.,-1.)); +#263929 = DIRECTION('',(1.,9.473903143468E-14,-0.)); +#263930 = ORIENTED_EDGE('',*,*,#263931,.T.); +#263931 = EDGE_CURVE('',#263923,#263904,#263932,.T.); +#263932 = LINE('',#263933,#263934); +#263933 = CARTESIAN_POINT('',(168.775,-67.0925,0.)); +#263934 = VECTOR('',#263935,1.); +#263935 = DIRECTION('',(0.,-1.,0.)); +#263936 = FACE_BOUND('',#263937,.F.); +#263937 = EDGE_LOOP('',(#263938)); +#263938 = ORIENTED_EDGE('',*,*,#263939,.T.); +#263939 = EDGE_CURVE('',#263940,#263940,#263942,.T.); +#263940 = VERTEX_POINT('',#263941); +#263941 = CARTESIAN_POINT('',(172.69165,-134.4731,0.)); +#263942 = CIRCLE('',#263943,0.65); +#263943 = AXIS2_PLACEMENT_3D('',#263944,#263945,#263946); +#263944 = CARTESIAN_POINT('',(172.69165,-133.8231,0.)); +#263945 = DIRECTION('',(-0.,0.,-1.)); +#263946 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#263947 = FACE_BOUND('',#263948,.F.); +#263948 = EDGE_LOOP('',(#263949)); +#263949 = ORIENTED_EDGE('',*,*,#263950,.T.); +#263950 = EDGE_CURVE('',#263951,#263951,#263953,.T.); +#263951 = VERTEX_POINT('',#263952); +#263952 = CARTESIAN_POINT('',(177.69165,-134.4731,0.)); +#263953 = CIRCLE('',#263954,0.65); +#263954 = AXIS2_PLACEMENT_3D('',#263955,#263956,#263957); +#263955 = CARTESIAN_POINT('',(177.69165,-133.8231,0.)); +#263956 = DIRECTION('',(-0.,0.,-1.)); +#263957 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#263958 = FACE_BOUND('',#263959,.F.); +#263959 = EDGE_LOOP('',(#263960)); +#263960 = ORIENTED_EDGE('',*,*,#263961,.T.); +#263961 = EDGE_CURVE('',#263962,#263962,#263964,.T.); +#263962 = VERTEX_POINT('',#263963); +#263963 = CARTESIAN_POINT('',(164.575,-130.975,0.)); +#263964 = CIRCLE('',#263965,0.2); +#263965 = AXIS2_PLACEMENT_3D('',#263966,#263967,#263968); +#263966 = CARTESIAN_POINT('',(164.575,-130.775,0.)); +#263967 = DIRECTION('',(-0.,0.,-1.)); +#263968 = DIRECTION('',(-0.,-1.,0.)); +#263969 = FACE_BOUND('',#263970,.F.); +#263970 = EDGE_LOOP('',(#263971)); +#263971 = ORIENTED_EDGE('',*,*,#263972,.T.); +#263972 = EDGE_CURVE('',#263973,#263973,#263975,.T.); +#263973 = VERTEX_POINT('',#263974); +#263974 = CARTESIAN_POINT('',(165.425,-130.975,0.)); +#263975 = CIRCLE('',#263976,0.2); +#263976 = AXIS2_PLACEMENT_3D('',#263977,#263978,#263979); +#263977 = CARTESIAN_POINT('',(165.425,-130.775,0.)); +#263978 = DIRECTION('',(-0.,0.,-1.)); +#263979 = DIRECTION('',(-0.,-1.,0.)); +#263980 = FACE_BOUND('',#263981,.F.); +#263981 = EDGE_LOOP('',(#263982)); +#263982 = ORIENTED_EDGE('',*,*,#263983,.T.); +#263983 = EDGE_CURVE('',#263984,#263984,#263986,.T.); +#263984 = VERTEX_POINT('',#263985); +#263985 = CARTESIAN_POINT('',(166.275,-130.975,0.)); +#263986 = CIRCLE('',#263987,0.2); +#263987 = AXIS2_PLACEMENT_3D('',#263988,#263989,#263990); +#263988 = CARTESIAN_POINT('',(166.275,-130.775,0.)); +#263989 = DIRECTION('',(-0.,0.,-1.)); +#263990 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#263991 = FACE_BOUND('',#263992,.F.); +#263992 = EDGE_LOOP('',(#263993)); +#263993 = ORIENTED_EDGE('',*,*,#263994,.T.); +#263994 = EDGE_CURVE('',#263995,#263995,#263997,.T.); +#263995 = VERTEX_POINT('',#263996); +#263996 = CARTESIAN_POINT('',(167.125,-130.975,0.)); +#263997 = CIRCLE('',#263998,0.2); +#263998 = AXIS2_PLACEMENT_3D('',#263999,#264000,#264001); +#263999 = CARTESIAN_POINT('',(167.125,-130.775,0.)); +#264000 = DIRECTION('',(-0.,0.,-1.)); +#264001 = DIRECTION('',(-0.,-1.,0.)); +#264002 = FACE_BOUND('',#264003,.F.); +#264003 = EDGE_LOOP('',(#264004,#264015,#264023,#264032)); +#264004 = ORIENTED_EDGE('',*,*,#264005,.T.); +#264005 = EDGE_CURVE('',#264006,#264008,#264010,.T.); +#264006 = VERTEX_POINT('',#264007); +#264007 = CARTESIAN_POINT('',(168.775,-131.155,0.)); +#264008 = VERTEX_POINT('',#264009); +#264009 = CARTESIAN_POINT('',(168.175,-131.155,0.)); +#264010 = CIRCLE('',#264011,0.3); +#264011 = AXIS2_PLACEMENT_3D('',#264012,#264013,#264014); +#264012 = CARTESIAN_POINT('',(168.475,-131.155,0.)); +#264013 = DIRECTION('',(-0.,0.,-1.)); +#264014 = DIRECTION('',(-1.,0.,0.)); +#264015 = ORIENTED_EDGE('',*,*,#264016,.T.); +#264016 = EDGE_CURVE('',#264008,#264017,#264019,.T.); +#264017 = VERTEX_POINT('',#264018); +#264018 = CARTESIAN_POINT('',(168.175,-129.655,0.)); +#264019 = LINE('',#264020,#264021); +#264020 = CARTESIAN_POINT('',(168.175,-64.8275,0.)); +#264021 = VECTOR('',#264022,1.); +#264022 = DIRECTION('',(-0.,1.,0.)); +#264023 = ORIENTED_EDGE('',*,*,#264024,.T.); +#264024 = EDGE_CURVE('',#264017,#264025,#264027,.T.); +#264025 = VERTEX_POINT('',#264026); +#264026 = CARTESIAN_POINT('',(168.775,-129.655,0.)); +#264027 = CIRCLE('',#264028,0.3); +#264028 = AXIS2_PLACEMENT_3D('',#264029,#264030,#264031); +#264029 = CARTESIAN_POINT('',(168.475,-129.655,0.)); +#264030 = DIRECTION('',(0.,-0.,-1.)); +#264031 = DIRECTION('',(1.,0.,-0.)); +#264032 = ORIENTED_EDGE('',*,*,#264033,.T.); +#264033 = EDGE_CURVE('',#264025,#264006,#264034,.T.); +#264034 = LINE('',#264035,#264036); +#264035 = CARTESIAN_POINT('',(168.775,-65.5775,0.)); +#264036 = VECTOR('',#264037,1.); +#264037 = DIRECTION('',(0.,-1.,0.)); +#264038 = FACE_BOUND('',#264039,.F.); +#264039 = EDGE_LOOP('',(#264040)); +#264040 = ORIENTED_EDGE('',*,*,#264041,.T.); +#264041 = EDGE_CURVE('',#264042,#264042,#264044,.T.); +#264042 = VERTEX_POINT('',#264043); +#264043 = CARTESIAN_POINT('',(164.575,-129.625,0.)); +#264044 = CIRCLE('',#264045,0.2); +#264045 = AXIS2_PLACEMENT_3D('',#264046,#264047,#264048); +#264046 = CARTESIAN_POINT('',(164.575,-129.425,0.)); +#264047 = DIRECTION('',(-0.,0.,-1.)); +#264048 = DIRECTION('',(-0.,-1.,0.)); +#264049 = FACE_BOUND('',#264050,.F.); +#264050 = EDGE_LOOP('',(#264051)); +#264051 = ORIENTED_EDGE('',*,*,#264052,.T.); +#264052 = EDGE_CURVE('',#264053,#264053,#264055,.T.); +#264053 = VERTEX_POINT('',#264054); +#264054 = CARTESIAN_POINT('',(165.425,-129.625,0.)); +#264055 = CIRCLE('',#264056,0.2); +#264056 = AXIS2_PLACEMENT_3D('',#264057,#264058,#264059); +#264057 = CARTESIAN_POINT('',(165.425,-129.425,0.)); +#264058 = DIRECTION('',(-0.,0.,-1.)); +#264059 = DIRECTION('',(-0.,-1.,0.)); +#264060 = FACE_BOUND('',#264061,.F.); +#264061 = EDGE_LOOP('',(#264062)); +#264062 = ORIENTED_EDGE('',*,*,#264063,.T.); +#264063 = EDGE_CURVE('',#264064,#264064,#264066,.T.); +#264064 = VERTEX_POINT('',#264065); +#264065 = CARTESIAN_POINT('',(166.275,-129.625,0.)); +#264066 = CIRCLE('',#264067,0.2); +#264067 = AXIS2_PLACEMENT_3D('',#264068,#264069,#264070); +#264068 = CARTESIAN_POINT('',(166.275,-129.425,0.)); +#264069 = DIRECTION('',(-0.,0.,-1.)); +#264070 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#264071 = FACE_BOUND('',#264072,.F.); +#264072 = EDGE_LOOP('',(#264073)); +#264073 = ORIENTED_EDGE('',*,*,#264074,.T.); +#264074 = EDGE_CURVE('',#264075,#264075,#264077,.T.); +#264075 = VERTEX_POINT('',#264076); +#264076 = CARTESIAN_POINT('',(167.125,-129.625,0.)); +#264077 = CIRCLE('',#264078,0.2); +#264078 = AXIS2_PLACEMENT_3D('',#264079,#264080,#264081); +#264079 = CARTESIAN_POINT('',(167.125,-129.425,0.)); +#264080 = DIRECTION('',(-0.,0.,-1.)); +#264081 = DIRECTION('',(-0.,-1.,0.)); +#264082 = FACE_BOUND('',#264083,.F.); +#264083 = EDGE_LOOP('',(#264084)); +#264084 = ORIENTED_EDGE('',*,*,#264085,.T.); +#264085 = EDGE_CURVE('',#264086,#264086,#264088,.T.); +#264086 = VERTEX_POINT('',#264087); +#264087 = CARTESIAN_POINT('',(182.69165,-134.4731,0.)); +#264088 = CIRCLE('',#264089,0.65); +#264089 = AXIS2_PLACEMENT_3D('',#264090,#264091,#264092); +#264090 = CARTESIAN_POINT('',(182.69165,-133.8231,0.)); +#264091 = DIRECTION('',(-0.,0.,-1.)); +#264092 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#264093 = FACE_BOUND('',#264094,.F.); +#264094 = EDGE_LOOP('',(#264095)); +#264095 = ORIENTED_EDGE('',*,*,#264096,.T.); +#264096 = EDGE_CURVE('',#264097,#264097,#264099,.T.); +#264097 = VERTEX_POINT('',#264098); +#264098 = CARTESIAN_POINT('',(187.69165,-134.4731,0.)); +#264099 = CIRCLE('',#264100,0.65); +#264100 = AXIS2_PLACEMENT_3D('',#264101,#264102,#264103); +#264101 = CARTESIAN_POINT('',(187.69165,-133.8231,0.)); +#264102 = DIRECTION('',(-0.,0.,-1.)); +#264103 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#264104 = FACE_BOUND('',#264105,.F.); +#264105 = EDGE_LOOP('',(#264106)); +#264106 = ORIENTED_EDGE('',*,*,#264107,.T.); +#264107 = EDGE_CURVE('',#264108,#264108,#264110,.T.); +#264108 = VERTEX_POINT('',#264109); +#264109 = CARTESIAN_POINT('',(192.69165,-134.4731,0.)); +#264110 = CIRCLE('',#264111,0.65); +#264111 = AXIS2_PLACEMENT_3D('',#264112,#264113,#264114); +#264112 = CARTESIAN_POINT('',(192.69165,-133.8231,0.)); +#264113 = DIRECTION('',(-0.,0.,-1.)); +#264114 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#264115 = FACE_BOUND('',#264116,.F.); +#264116 = EDGE_LOOP('',(#264117)); +#264117 = ORIENTED_EDGE('',*,*,#264118,.T.); +#264118 = EDGE_CURVE('',#264119,#264119,#264121,.T.); +#264119 = VERTEX_POINT('',#264120); +#264120 = CARTESIAN_POINT('',(199.19165,-138.3731,0.)); +#264121 = CIRCLE('',#264122,0.55); +#264122 = AXIS2_PLACEMENT_3D('',#264123,#264124,#264125); +#264123 = CARTESIAN_POINT('',(199.19165,-137.8231,0.)); +#264124 = DIRECTION('',(-0.,0.,-1.)); +#264125 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264126 = FACE_BOUND('',#264127,.F.); +#264127 = EDGE_LOOP('',(#264128)); +#264128 = ORIENTED_EDGE('',*,*,#264129,.T.); +#264129 = EDGE_CURVE('',#264130,#264130,#264132,.T.); +#264130 = VERTEX_POINT('',#264131); +#264131 = CARTESIAN_POINT('',(199.19165,-133.8731,0.)); +#264132 = CIRCLE('',#264133,0.55); +#264133 = AXIS2_PLACEMENT_3D('',#264134,#264135,#264136); +#264134 = CARTESIAN_POINT('',(199.19165,-133.3231,0.)); +#264135 = DIRECTION('',(-0.,0.,-1.)); +#264136 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264137 = FACE_BOUND('',#264138,.F.); +#264138 = EDGE_LOOP('',(#264139)); +#264139 = ORIENTED_EDGE('',*,*,#264140,.T.); +#264140 = EDGE_CURVE('',#264141,#264141,#264143,.T.); +#264141 = VERTEX_POINT('',#264142); +#264142 = CARTESIAN_POINT('',(205.69165,-138.3731,0.)); +#264143 = CIRCLE('',#264144,0.55); +#264144 = AXIS2_PLACEMENT_3D('',#264145,#264146,#264147); +#264145 = CARTESIAN_POINT('',(205.69165,-137.8231,0.)); +#264146 = DIRECTION('',(-0.,0.,-1.)); +#264147 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264148 = FACE_BOUND('',#264149,.F.); +#264149 = EDGE_LOOP('',(#264150)); +#264150 = ORIENTED_EDGE('',*,*,#264151,.T.); +#264151 = EDGE_CURVE('',#264152,#264152,#264154,.T.); +#264152 = VERTEX_POINT('',#264153); +#264153 = CARTESIAN_POINT('',(205.69165,-133.8731,0.)); +#264154 = CIRCLE('',#264155,0.55); +#264155 = AXIS2_PLACEMENT_3D('',#264156,#264157,#264158); +#264156 = CARTESIAN_POINT('',(205.69165,-133.3231,0.)); +#264157 = DIRECTION('',(-0.,0.,-1.)); +#264158 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#264159 = FACE_BOUND('',#264160,.F.); +#264160 = EDGE_LOOP('',(#264161)); +#264161 = ORIENTED_EDGE('',*,*,#264162,.T.); +#264162 = EDGE_CURVE('',#264163,#264163,#264165,.T.); +#264163 = VERTEX_POINT('',#264164); +#264164 = CARTESIAN_POINT('',(211.19165,-136.9231,0.)); +#264165 = CIRCLE('',#264166,1.6); +#264166 = AXIS2_PLACEMENT_3D('',#264167,#264168,#264169); +#264167 = CARTESIAN_POINT('',(211.19165,-135.3231,0.)); +#264168 = DIRECTION('',(-0.,0.,-1.)); +#264169 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#264170 = FACE_BOUND('',#264171,.F.); +#264171 = EDGE_LOOP('',(#264172)); +#264172 = ORIENTED_EDGE('',*,*,#264173,.T.); +#264173 = EDGE_CURVE('',#264174,#264174,#264176,.T.); +#264174 = VERTEX_POINT('',#264175); +#264175 = CARTESIAN_POINT('',(210.19165,-121.8231,0.)); +#264176 = CIRCLE('',#264177,0.5); +#264177 = AXIS2_PLACEMENT_3D('',#264178,#264179,#264180); +#264178 = CARTESIAN_POINT('',(210.19165,-121.3231,0.)); +#264179 = DIRECTION('',(-0.,0.,-1.)); +#264180 = DIRECTION('',(-0.,-1.,0.)); +#264181 = FACE_BOUND('',#264182,.F.); +#264182 = EDGE_LOOP('',(#264183)); +#264183 = ORIENTED_EDGE('',*,*,#264184,.T.); +#264184 = EDGE_CURVE('',#264185,#264185,#264187,.T.); +#264185 = VERTEX_POINT('',#264186); +#264186 = CARTESIAN_POINT('',(210.19165,-119.3231,0.)); +#264187 = CIRCLE('',#264188,0.5); +#264188 = AXIS2_PLACEMENT_3D('',#264189,#264190,#264191); +#264189 = CARTESIAN_POINT('',(210.19165,-118.8231,0.)); +#264190 = DIRECTION('',(-0.,0.,-1.)); +#264191 = DIRECTION('',(-0.,-1.,0.)); +#264192 = FACE_BOUND('',#264193,.F.); +#264193 = EDGE_LOOP('',(#264194)); +#264194 = ORIENTED_EDGE('',*,*,#264195,.T.); +#264195 = EDGE_CURVE('',#264196,#264196,#264198,.T.); +#264196 = VERTEX_POINT('',#264197); +#264197 = CARTESIAN_POINT('',(174.19165,-93.2231,0.)); +#264198 = CIRCLE('',#264199,0.4); +#264199 = AXIS2_PLACEMENT_3D('',#264200,#264201,#264202); +#264200 = CARTESIAN_POINT('',(174.19165,-92.8231,0.)); +#264201 = DIRECTION('',(-0.,0.,-1.)); +#264202 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#264203 = FACE_BOUND('',#264204,.F.); +#264204 = EDGE_LOOP('',(#264205)); +#264205 = ORIENTED_EDGE('',*,*,#264206,.T.); +#264206 = EDGE_CURVE('',#264207,#264207,#264209,.T.); +#264207 = VERTEX_POINT('',#264208); +#264208 = CARTESIAN_POINT('',(210.19165,-108.7981,0.)); +#264209 = CIRCLE('',#264210,0.475); +#264210 = AXIS2_PLACEMENT_3D('',#264211,#264212,#264213); +#264211 = CARTESIAN_POINT('',(210.19165,-108.3231,0.)); +#264212 = DIRECTION('',(-0.,0.,-1.)); +#264213 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264214 = FACE_BOUND('',#264215,.F.); +#264215 = EDGE_LOOP('',(#264216)); +#264216 = ORIENTED_EDGE('',*,*,#264217,.T.); +#264217 = EDGE_CURVE('',#264218,#264218,#264220,.T.); +#264218 = VERTEX_POINT('',#264219); +#264219 = CARTESIAN_POINT('',(210.19165,-106.2981,0.)); +#264220 = CIRCLE('',#264221,0.475); +#264221 = AXIS2_PLACEMENT_3D('',#264222,#264223,#264224); +#264222 = CARTESIAN_POINT('',(210.19165,-105.8231,0.)); +#264223 = DIRECTION('',(-0.,0.,-1.)); +#264224 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264225 = FACE_BOUND('',#264226,.F.); +#264226 = EDGE_LOOP('',(#264227)); +#264227 = ORIENTED_EDGE('',*,*,#264228,.T.); +#264228 = EDGE_CURVE('',#264229,#264229,#264231,.T.); +#264229 = VERTEX_POINT('',#264230); +#264230 = CARTESIAN_POINT('',(210.19165,-103.7981,0.)); +#264231 = CIRCLE('',#264232,0.475); +#264232 = AXIS2_PLACEMENT_3D('',#264233,#264234,#264235); +#264233 = CARTESIAN_POINT('',(210.19165,-103.3231,0.)); +#264234 = DIRECTION('',(-0.,0.,-1.)); +#264235 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264236 = FACE_BOUND('',#264237,.F.); +#264237 = EDGE_LOOP('',(#264238)); +#264238 = ORIENTED_EDGE('',*,*,#264239,.T.); +#264239 = EDGE_CURVE('',#264240,#264240,#264242,.T.); +#264240 = VERTEX_POINT('',#264241); +#264241 = CARTESIAN_POINT('',(196.54165,-93.2231,0.)); +#264242 = CIRCLE('',#264243,0.4); +#264243 = AXIS2_PLACEMENT_3D('',#264244,#264245,#264246); +#264244 = CARTESIAN_POINT('',(196.54165,-92.8231,0.)); +#264245 = DIRECTION('',(-0.,0.,-1.)); +#264246 = DIRECTION('',(-0.,-1.,0.)); +#264247 = FACE_BOUND('',#264248,.F.); +#264248 = EDGE_LOOP('',(#264249)); +#264249 = ORIENTED_EDGE('',*,*,#264250,.T.); +#264250 = EDGE_CURVE('',#264251,#264251,#264253,.T.); +#264251 = VERTEX_POINT('',#264252); +#264252 = CARTESIAN_POINT('',(210.19165,-95.7981,0.)); +#264253 = CIRCLE('',#264254,0.475); +#264254 = AXIS2_PLACEMENT_3D('',#264255,#264256,#264257); +#264255 = CARTESIAN_POINT('',(210.19165,-95.3231,0.)); +#264256 = DIRECTION('',(-0.,0.,-1.)); +#264257 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264258 = FACE_BOUND('',#264259,.F.); +#264259 = EDGE_LOOP('',(#264260)); +#264260 = ORIENTED_EDGE('',*,*,#264261,.T.); +#264261 = EDGE_CURVE('',#264262,#264262,#264264,.T.); +#264262 = VERTEX_POINT('',#264263); +#264263 = CARTESIAN_POINT('',(210.19165,-93.2981,0.)); +#264264 = CIRCLE('',#264265,0.475); +#264265 = AXIS2_PLACEMENT_3D('',#264266,#264267,#264268); +#264266 = CARTESIAN_POINT('',(210.19165,-92.8231,0.)); +#264267 = DIRECTION('',(-0.,0.,-1.)); +#264268 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#264269 = FACE_BOUND('',#264270,.F.); +#264270 = EDGE_LOOP('',(#264271)); +#264271 = ORIENTED_EDGE('',*,*,#264272,.T.); +#264272 = EDGE_CURVE('',#264273,#264273,#264275,.T.); +#264273 = VERTEX_POINT('',#264274); +#264274 = CARTESIAN_POINT('',(106.11165,-81.8231,0.)); +#264275 = CIRCLE('',#264276,0.5); +#264276 = AXIS2_PLACEMENT_3D('',#264277,#264278,#264279); +#264277 = CARTESIAN_POINT('',(106.11165,-81.3231,0.)); +#264278 = DIRECTION('',(-0.,0.,-1.)); +#264279 = DIRECTION('',(-0.,-1.,0.)); +#264280 = FACE_BOUND('',#264281,.F.); +#264281 = EDGE_LOOP('',(#264282)); +#264282 = ORIENTED_EDGE('',*,*,#264283,.T.); +#264283 = EDGE_CURVE('',#264284,#264284,#264286,.T.); +#264284 = VERTEX_POINT('',#264285); +#264285 = CARTESIAN_POINT('',(108.65165,-81.8231,0.)); +#264286 = CIRCLE('',#264287,0.5); +#264287 = AXIS2_PLACEMENT_3D('',#264288,#264289,#264290); +#264288 = CARTESIAN_POINT('',(108.65165,-81.3231,0.)); +#264289 = DIRECTION('',(-0.,0.,-1.)); +#264290 = DIRECTION('',(-0.,-1.,0.)); +#264291 = FACE_BOUND('',#264292,.F.); +#264292 = EDGE_LOOP('',(#264293)); +#264293 = ORIENTED_EDGE('',*,*,#264294,.T.); +#264294 = EDGE_CURVE('',#264295,#264295,#264297,.T.); +#264295 = VERTEX_POINT('',#264296); +#264296 = CARTESIAN_POINT('',(111.19165,-81.8231,0.)); +#264297 = CIRCLE('',#264298,0.5); +#264298 = AXIS2_PLACEMENT_3D('',#264299,#264300,#264301); +#264299 = CARTESIAN_POINT('',(111.19165,-81.3231,0.)); +#264300 = DIRECTION('',(-0.,0.,-1.)); +#264301 = DIRECTION('',(-0.,-1.,0.)); +#264302 = FACE_BOUND('',#264303,.F.); +#264303 = EDGE_LOOP('',(#264304)); +#264304 = ORIENTED_EDGE('',*,*,#264305,.T.); +#264305 = EDGE_CURVE('',#264306,#264306,#264308,.T.); +#264306 = VERTEX_POINT('',#264307); +#264307 = CARTESIAN_POINT('',(113.73165,-81.8231,0.)); +#264308 = CIRCLE('',#264309,0.5); +#264309 = AXIS2_PLACEMENT_3D('',#264310,#264311,#264312); +#264310 = CARTESIAN_POINT('',(113.73165,-81.3231,0.)); +#264311 = DIRECTION('',(-0.,0.,-1.)); +#264312 = DIRECTION('',(-0.,-1.,0.)); +#264313 = FACE_BOUND('',#264314,.F.); +#264314 = EDGE_LOOP('',(#264315)); +#264315 = ORIENTED_EDGE('',*,*,#264316,.T.); +#264316 = EDGE_CURVE('',#264317,#264317,#264319,.T.); +#264317 = VERTEX_POINT('',#264318); +#264318 = CARTESIAN_POINT('',(107.19165,-74.6031,0.)); +#264319 = CIRCLE('',#264320,0.5); +#264320 = AXIS2_PLACEMENT_3D('',#264321,#264322,#264323); +#264321 = CARTESIAN_POINT('',(107.19165,-74.1031,0.)); +#264322 = DIRECTION('',(-0.,0.,-1.)); +#264323 = DIRECTION('',(-0.,-1.,0.)); +#264324 = FACE_BOUND('',#264325,.F.); +#264325 = EDGE_LOOP('',(#264326)); +#264326 = ORIENTED_EDGE('',*,*,#264327,.T.); +#264327 = EDGE_CURVE('',#264328,#264328,#264330,.T.); +#264328 = VERTEX_POINT('',#264329); +#264329 = CARTESIAN_POINT('',(109.73165,-74.6031,0.)); +#264330 = CIRCLE('',#264331,0.5); +#264331 = AXIS2_PLACEMENT_3D('',#264332,#264333,#264334); +#264332 = CARTESIAN_POINT('',(109.73165,-74.1031,0.)); +#264333 = DIRECTION('',(-0.,0.,-1.)); +#264334 = DIRECTION('',(-0.,-1.,0.)); +#264335 = FACE_BOUND('',#264336,.F.); +#264336 = EDGE_LOOP('',(#264337)); +#264337 = ORIENTED_EDGE('',*,*,#264338,.T.); +#264338 = EDGE_CURVE('',#264339,#264339,#264341,.T.); +#264339 = VERTEX_POINT('',#264340); +#264340 = CARTESIAN_POINT('',(112.27165,-74.6031,0.)); +#264341 = CIRCLE('',#264342,0.5); +#264342 = AXIS2_PLACEMENT_3D('',#264343,#264344,#264345); +#264343 = CARTESIAN_POINT('',(112.27165,-74.1031,0.)); +#264344 = DIRECTION('',(-0.,0.,-1.)); +#264345 = DIRECTION('',(-0.,-1.,0.)); +#264346 = FACE_BOUND('',#264347,.F.); +#264347 = EDGE_LOOP('',(#264348)); +#264348 = ORIENTED_EDGE('',*,*,#264349,.T.); +#264349 = EDGE_CURVE('',#264350,#264350,#264352,.T.); +#264350 = VERTEX_POINT('',#264351); +#264351 = CARTESIAN_POINT('',(114.81165,-74.6031,0.)); +#264352 = CIRCLE('',#264353,0.5); +#264353 = AXIS2_PLACEMENT_3D('',#264354,#264355,#264356); +#264354 = CARTESIAN_POINT('',(114.81165,-74.1031,0.)); +#264355 = DIRECTION('',(-0.,0.,-1.)); +#264356 = DIRECTION('',(-0.,-1.,0.)); +#264357 = FACE_BOUND('',#264358,.F.); +#264358 = EDGE_LOOP('',(#264359)); +#264359 = ORIENTED_EDGE('',*,*,#264360,.T.); +#264360 = EDGE_CURVE('',#264361,#264361,#264363,.T.); +#264361 = VERTEX_POINT('',#264362); +#264362 = CARTESIAN_POINT('',(116.27165,-81.8231,0.)); +#264363 = CIRCLE('',#264364,0.5); +#264364 = AXIS2_PLACEMENT_3D('',#264365,#264366,#264367); +#264365 = CARTESIAN_POINT('',(116.27165,-81.3231,0.)); +#264366 = DIRECTION('',(-0.,0.,-1.)); +#264367 = DIRECTION('',(-0.,-1.,0.)); +#264368 = FACE_BOUND('',#264369,.F.); +#264369 = EDGE_LOOP('',(#264370)); +#264370 = ORIENTED_EDGE('',*,*,#264371,.T.); +#264371 = EDGE_CURVE('',#264372,#264372,#264374,.T.); +#264372 = VERTEX_POINT('',#264373); +#264373 = CARTESIAN_POINT('',(118.81165,-81.8231,0.)); +#264374 = CIRCLE('',#264375,0.5); +#264375 = AXIS2_PLACEMENT_3D('',#264376,#264377,#264378); +#264376 = CARTESIAN_POINT('',(118.81165,-81.3231,0.)); +#264377 = DIRECTION('',(-0.,0.,-1.)); +#264378 = DIRECTION('',(-0.,-1.,0.)); +#264379 = FACE_BOUND('',#264380,.F.); +#264380 = EDGE_LOOP('',(#264381)); +#264381 = ORIENTED_EDGE('',*,*,#264382,.T.); +#264382 = EDGE_CURVE('',#264383,#264383,#264385,.T.); +#264383 = VERTEX_POINT('',#264384); +#264384 = CARTESIAN_POINT('',(121.35165,-81.8231,0.)); +#264385 = CIRCLE('',#264386,0.5); +#264386 = AXIS2_PLACEMENT_3D('',#264387,#264388,#264389); +#264387 = CARTESIAN_POINT('',(121.35165,-81.3231,0.)); +#264388 = DIRECTION('',(-0.,0.,-1.)); +#264389 = DIRECTION('',(-0.,-1.,0.)); +#264390 = FACE_BOUND('',#264391,.F.); +#264391 = EDGE_LOOP('',(#264392)); +#264392 = ORIENTED_EDGE('',*,*,#264393,.T.); +#264393 = EDGE_CURVE('',#264394,#264394,#264396,.T.); +#264394 = VERTEX_POINT('',#264395); +#264395 = CARTESIAN_POINT('',(123.89165,-81.8231,0.)); +#264396 = CIRCLE('',#264397,0.5); +#264397 = AXIS2_PLACEMENT_3D('',#264398,#264399,#264400); +#264398 = CARTESIAN_POINT('',(123.89165,-81.3231,0.)); +#264399 = DIRECTION('',(-0.,0.,-1.)); +#264400 = DIRECTION('',(-0.,-1.,0.)); +#264401 = FACE_BOUND('',#264402,.F.); +#264402 = EDGE_LOOP('',(#264403)); +#264403 = ORIENTED_EDGE('',*,*,#264404,.T.); +#264404 = EDGE_CURVE('',#264405,#264405,#264407,.T.); +#264405 = VERTEX_POINT('',#264406); +#264406 = CARTESIAN_POINT('',(126.43165,-81.8231,0.)); +#264407 = CIRCLE('',#264408,0.5); +#264408 = AXIS2_PLACEMENT_3D('',#264409,#264410,#264411); +#264409 = CARTESIAN_POINT('',(126.43165,-81.3231,0.)); +#264410 = DIRECTION('',(-0.,0.,-1.)); +#264411 = DIRECTION('',(-0.,-1.,0.)); +#264412 = FACE_BOUND('',#264413,.F.); +#264413 = EDGE_LOOP('',(#264414)); +#264414 = ORIENTED_EDGE('',*,*,#264415,.T.); +#264415 = EDGE_CURVE('',#264416,#264416,#264418,.T.); +#264416 = VERTEX_POINT('',#264417); +#264417 = CARTESIAN_POINT('',(128.97165,-81.8231,0.)); +#264418 = CIRCLE('',#264419,0.5); +#264419 = AXIS2_PLACEMENT_3D('',#264420,#264421,#264422); +#264420 = CARTESIAN_POINT('',(128.97165,-81.3231,0.)); +#264421 = DIRECTION('',(-0.,0.,-1.)); +#264422 = DIRECTION('',(-0.,-1.,0.)); +#264423 = FACE_BOUND('',#264424,.F.); +#264424 = EDGE_LOOP('',(#264425)); +#264425 = ORIENTED_EDGE('',*,*,#264426,.T.); +#264426 = EDGE_CURVE('',#264427,#264427,#264429,.T.); +#264427 = VERTEX_POINT('',#264428); +#264428 = CARTESIAN_POINT('',(133.03165,-81.8231,0.)); +#264429 = CIRCLE('',#264430,0.5); +#264430 = AXIS2_PLACEMENT_3D('',#264431,#264432,#264433); +#264431 = CARTESIAN_POINT('',(133.03165,-81.3231,0.)); +#264432 = DIRECTION('',(-0.,0.,-1.)); +#264433 = DIRECTION('',(-0.,-1.,0.)); +#264434 = FACE_BOUND('',#264435,.F.); +#264435 = EDGE_LOOP('',(#264436)); +#264436 = ORIENTED_EDGE('',*,*,#264437,.T.); +#264437 = EDGE_CURVE('',#264438,#264438,#264440,.T.); +#264438 = VERTEX_POINT('',#264439); +#264439 = CARTESIAN_POINT('',(135.57165,-81.8231,0.)); +#264440 = CIRCLE('',#264441,0.5); +#264441 = AXIS2_PLACEMENT_3D('',#264442,#264443,#264444); +#264442 = CARTESIAN_POINT('',(135.57165,-81.3231,0.)); +#264443 = DIRECTION('',(-0.,0.,-1.)); +#264444 = DIRECTION('',(-0.,-1.,0.)); +#264445 = FACE_BOUND('',#264446,.F.); +#264446 = EDGE_LOOP('',(#264447)); +#264447 = ORIENTED_EDGE('',*,*,#264448,.T.); +#264448 = EDGE_CURVE('',#264449,#264449,#264451,.T.); +#264449 = VERTEX_POINT('',#264450); +#264450 = CARTESIAN_POINT('',(138.11165,-81.8231,0.)); +#264451 = CIRCLE('',#264452,0.5); +#264452 = AXIS2_PLACEMENT_3D('',#264453,#264454,#264455); +#264453 = CARTESIAN_POINT('',(138.11165,-81.3231,0.)); +#264454 = DIRECTION('',(-0.,0.,-1.)); +#264455 = DIRECTION('',(-0.,-1.,0.)); +#264456 = FACE_BOUND('',#264457,.F.); +#264457 = EDGE_LOOP('',(#264458)); +#264458 = ORIENTED_EDGE('',*,*,#264459,.T.); +#264459 = EDGE_CURVE('',#264460,#264460,#264462,.T.); +#264460 = VERTEX_POINT('',#264461); +#264461 = CARTESIAN_POINT('',(140.65165,-81.8231,0.)); +#264462 = CIRCLE('',#264463,0.5); +#264463 = AXIS2_PLACEMENT_3D('',#264464,#264465,#264466); +#264464 = CARTESIAN_POINT('',(140.65165,-81.3231,0.)); +#264465 = DIRECTION('',(-0.,0.,-1.)); +#264466 = DIRECTION('',(-0.,-1.,0.)); +#264467 = FACE_BOUND('',#264468,.F.); +#264468 = EDGE_LOOP('',(#264469)); +#264469 = ORIENTED_EDGE('',*,*,#264470,.T.); +#264470 = EDGE_CURVE('',#264471,#264471,#264473,.T.); +#264471 = VERTEX_POINT('',#264472); +#264472 = CARTESIAN_POINT('',(143.19165,-81.8231,0.)); +#264473 = CIRCLE('',#264474,0.5); +#264474 = AXIS2_PLACEMENT_3D('',#264475,#264476,#264477); +#264475 = CARTESIAN_POINT('',(143.19165,-81.3231,0.)); +#264476 = DIRECTION('',(-0.,0.,-1.)); +#264477 = DIRECTION('',(-0.,-1.,0.)); +#264478 = FACE_BOUND('',#264479,.F.); +#264479 = EDGE_LOOP('',(#264480)); +#264480 = ORIENTED_EDGE('',*,*,#264481,.T.); +#264481 = EDGE_CURVE('',#264482,#264482,#264484,.T.); +#264482 = VERTEX_POINT('',#264483); +#264483 = CARTESIAN_POINT('',(145.73165,-81.8231,0.)); +#264484 = CIRCLE('',#264485,0.5); +#264485 = AXIS2_PLACEMENT_3D('',#264486,#264487,#264488); +#264486 = CARTESIAN_POINT('',(145.73165,-81.3231,0.)); +#264487 = DIRECTION('',(-0.,0.,-1.)); +#264488 = DIRECTION('',(-0.,-1.,0.)); +#264489 = FACE_BOUND('',#264490,.F.); +#264490 = EDGE_LOOP('',(#264491)); +#264491 = ORIENTED_EDGE('',*,*,#264492,.T.); +#264492 = EDGE_CURVE('',#264493,#264493,#264495,.T.); +#264493 = VERTEX_POINT('',#264494); +#264494 = CARTESIAN_POINT('',(117.35165,-74.6031,0.)); +#264495 = CIRCLE('',#264496,0.5); +#264496 = AXIS2_PLACEMENT_3D('',#264497,#264498,#264499); +#264497 = CARTESIAN_POINT('',(117.35165,-74.1031,0.)); +#264498 = DIRECTION('',(-0.,0.,-1.)); +#264499 = DIRECTION('',(-0.,-1.,0.)); +#264500 = FACE_BOUND('',#264501,.F.); +#264501 = EDGE_LOOP('',(#264502)); +#264502 = ORIENTED_EDGE('',*,*,#264503,.T.); +#264503 = EDGE_CURVE('',#264504,#264504,#264506,.T.); +#264504 = VERTEX_POINT('',#264505); +#264505 = CARTESIAN_POINT('',(119.89165,-74.6031,0.)); +#264506 = CIRCLE('',#264507,0.5); +#264507 = AXIS2_PLACEMENT_3D('',#264508,#264509,#264510); +#264508 = CARTESIAN_POINT('',(119.89165,-74.1031,0.)); +#264509 = DIRECTION('',(-0.,0.,-1.)); +#264510 = DIRECTION('',(-0.,-1.,0.)); +#264511 = FACE_BOUND('',#264512,.F.); +#264512 = EDGE_LOOP('',(#264513)); +#264513 = ORIENTED_EDGE('',*,*,#264514,.T.); +#264514 = EDGE_CURVE('',#264515,#264515,#264517,.T.); +#264515 = VERTEX_POINT('',#264516); +#264516 = CARTESIAN_POINT('',(122.43165,-74.6031,0.)); +#264517 = CIRCLE('',#264518,0.5); +#264518 = AXIS2_PLACEMENT_3D('',#264519,#264520,#264521); +#264519 = CARTESIAN_POINT('',(122.43165,-74.1031,0.)); +#264520 = DIRECTION('',(-0.,0.,-1.)); +#264521 = DIRECTION('',(-0.,-1.,0.)); +#264522 = FACE_BOUND('',#264523,.F.); +#264523 = EDGE_LOOP('',(#264524)); +#264524 = ORIENTED_EDGE('',*,*,#264525,.T.); +#264525 = EDGE_CURVE('',#264526,#264526,#264528,.T.); +#264526 = VERTEX_POINT('',#264527); +#264527 = CARTESIAN_POINT('',(124.97165,-74.6031,0.)); +#264528 = CIRCLE('',#264529,0.5); +#264529 = AXIS2_PLACEMENT_3D('',#264530,#264531,#264532); +#264530 = CARTESIAN_POINT('',(124.97165,-74.1031,0.)); +#264531 = DIRECTION('',(-0.,0.,-1.)); +#264532 = DIRECTION('',(-0.,-1.,0.)); +#264533 = FACE_BOUND('',#264534,.F.); +#264534 = EDGE_LOOP('',(#264535)); +#264535 = ORIENTED_EDGE('',*,*,#264536,.T.); +#264536 = EDGE_CURVE('',#264537,#264537,#264539,.T.); +#264537 = VERTEX_POINT('',#264538); +#264538 = CARTESIAN_POINT('',(127.51165,-74.6031,0.)); +#264539 = CIRCLE('',#264540,0.5); +#264540 = AXIS2_PLACEMENT_3D('',#264541,#264542,#264543); +#264541 = CARTESIAN_POINT('',(127.51165,-74.1031,0.)); +#264542 = DIRECTION('',(-0.,0.,-1.)); +#264543 = DIRECTION('',(-0.,-1.,0.)); +#264544 = FACE_BOUND('',#264545,.F.); +#264545 = EDGE_LOOP('',(#264546)); +#264546 = ORIENTED_EDGE('',*,*,#264547,.T.); +#264547 = EDGE_CURVE('',#264548,#264548,#264550,.T.); +#264548 = VERTEX_POINT('',#264549); +#264549 = CARTESIAN_POINT('',(130.05165,-74.6031,0.)); +#264550 = CIRCLE('',#264551,0.5); +#264551 = AXIS2_PLACEMENT_3D('',#264552,#264553,#264554); +#264552 = CARTESIAN_POINT('',(130.05165,-74.1031,0.)); +#264553 = DIRECTION('',(-0.,0.,-1.)); +#264554 = DIRECTION('',(-0.,-1.,0.)); +#264555 = FACE_BOUND('',#264556,.F.); +#264556 = EDGE_LOOP('',(#264557)); +#264557 = ORIENTED_EDGE('',*,*,#264558,.T.); +#264558 = EDGE_CURVE('',#264559,#264559,#264561,.T.); +#264559 = VERTEX_POINT('',#264560); +#264560 = CARTESIAN_POINT('',(132.59165,-74.6031,0.)); +#264561 = CIRCLE('',#264562,0.5); +#264562 = AXIS2_PLACEMENT_3D('',#264563,#264564,#264565); +#264563 = CARTESIAN_POINT('',(132.59165,-74.1031,0.)); +#264564 = DIRECTION('',(-0.,0.,-1.)); +#264565 = DIRECTION('',(-0.,-1.,0.)); +#264566 = FACE_BOUND('',#264567,.F.); +#264567 = EDGE_LOOP('',(#264568)); +#264568 = ORIENTED_EDGE('',*,*,#264569,.T.); +#264569 = EDGE_CURVE('',#264570,#264570,#264572,.T.); +#264570 = VERTEX_POINT('',#264571); +#264571 = CARTESIAN_POINT('',(135.13165,-74.6031,0.)); +#264572 = CIRCLE('',#264573,0.5); +#264573 = AXIS2_PLACEMENT_3D('',#264574,#264575,#264576); +#264574 = CARTESIAN_POINT('',(135.13165,-74.1031,0.)); +#264575 = DIRECTION('',(-0.,0.,-1.)); +#264576 = DIRECTION('',(-0.,-1.,0.)); +#264577 = FACE_BOUND('',#264578,.F.); +#264578 = EDGE_LOOP('',(#264579)); +#264579 = ORIENTED_EDGE('',*,*,#264580,.T.); +#264580 = EDGE_CURVE('',#264581,#264581,#264583,.T.); +#264581 = VERTEX_POINT('',#264582); +#264582 = CARTESIAN_POINT('',(137.67165,-74.6031,0.)); +#264583 = CIRCLE('',#264584,0.5); +#264584 = AXIS2_PLACEMENT_3D('',#264585,#264586,#264587); +#264585 = CARTESIAN_POINT('',(137.67165,-74.1031,0.)); +#264586 = DIRECTION('',(-0.,0.,-1.)); +#264587 = DIRECTION('',(-0.,-1.,0.)); +#264588 = FACE_BOUND('',#264589,.F.); +#264589 = EDGE_LOOP('',(#264590)); +#264590 = ORIENTED_EDGE('',*,*,#264591,.T.); +#264591 = EDGE_CURVE('',#264592,#264592,#264594,.T.); +#264592 = VERTEX_POINT('',#264593); +#264593 = CARTESIAN_POINT('',(140.21165,-74.6031,0.)); +#264594 = CIRCLE('',#264595,0.5); +#264595 = AXIS2_PLACEMENT_3D('',#264596,#264597,#264598); +#264596 = CARTESIAN_POINT('',(140.21165,-74.1031,0.)); +#264597 = DIRECTION('',(-0.,0.,-1.)); +#264598 = DIRECTION('',(-0.,-1.,0.)); +#264599 = FACE_BOUND('',#264600,.F.); +#264600 = EDGE_LOOP('',(#264601)); +#264601 = ORIENTED_EDGE('',*,*,#264602,.T.); +#264602 = EDGE_CURVE('',#264603,#264603,#264605,.T.); +#264603 = VERTEX_POINT('',#264604); +#264604 = CARTESIAN_POINT('',(142.75165,-74.6031,0.)); +#264605 = CIRCLE('',#264606,0.5); +#264606 = AXIS2_PLACEMENT_3D('',#264607,#264608,#264609); +#264607 = CARTESIAN_POINT('',(142.75165,-74.1031,0.)); +#264608 = DIRECTION('',(-0.,0.,-1.)); +#264609 = DIRECTION('',(-0.,-1.,0.)); +#264610 = FACE_BOUND('',#264611,.F.); +#264611 = EDGE_LOOP('',(#264612)); +#264612 = ORIENTED_EDGE('',*,*,#264613,.T.); +#264613 = EDGE_CURVE('',#264614,#264614,#264616,.T.); +#264614 = VERTEX_POINT('',#264615); +#264615 = CARTESIAN_POINT('',(145.29165,-74.6031,0.)); +#264616 = CIRCLE('',#264617,0.5); +#264617 = AXIS2_PLACEMENT_3D('',#264618,#264619,#264620); +#264618 = CARTESIAN_POINT('',(145.29165,-74.1031,0.)); +#264619 = DIRECTION('',(-0.,0.,-1.)); +#264620 = DIRECTION('',(-0.,-1.,0.)); +#264621 = FACE_BOUND('',#264622,.F.); +#264622 = EDGE_LOOP('',(#264623)); +#264623 = ORIENTED_EDGE('',*,*,#264624,.T.); +#264624 = EDGE_CURVE('',#264625,#264625,#264627,.T.); +#264625 = VERTEX_POINT('',#264626); +#264626 = CARTESIAN_POINT('',(147.83165,-74.6031,0.)); +#264627 = CIRCLE('',#264628,0.5); +#264628 = AXIS2_PLACEMENT_3D('',#264629,#264630,#264631); +#264629 = CARTESIAN_POINT('',(147.83165,-74.1031,0.)); +#264630 = DIRECTION('',(-0.,0.,-1.)); +#264631 = DIRECTION('',(-0.,-1.,0.)); +#264632 = FACE_BOUND('',#264633,.F.); +#264633 = EDGE_LOOP('',(#264634)); +#264634 = ORIENTED_EDGE('',*,*,#264635,.T.); +#264635 = EDGE_CURVE('',#264636,#264636,#264638,.T.); +#264636 = VERTEX_POINT('',#264637); +#264637 = CARTESIAN_POINT('',(107.19165,-56.8231,0.)); +#264638 = CIRCLE('',#264639,0.5); +#264639 = AXIS2_PLACEMENT_3D('',#264640,#264641,#264642); +#264640 = CARTESIAN_POINT('',(107.19165,-56.3231,0.)); +#264641 = DIRECTION('',(-0.,0.,-1.)); +#264642 = DIRECTION('',(-0.,-1.,0.)); +#264643 = FACE_BOUND('',#264644,.F.); +#264644 = EDGE_LOOP('',(#264645)); +#264645 = ORIENTED_EDGE('',*,*,#264646,.T.); +#264646 = EDGE_CURVE('',#264647,#264647,#264649,.T.); +#264647 = VERTEX_POINT('',#264648); +#264648 = CARTESIAN_POINT('',(109.73165,-56.8231,0.)); +#264649 = CIRCLE('',#264650,0.5); +#264650 = AXIS2_PLACEMENT_3D('',#264651,#264652,#264653); +#264651 = CARTESIAN_POINT('',(109.73165,-56.3231,0.)); +#264652 = DIRECTION('',(-0.,0.,-1.)); +#264653 = DIRECTION('',(-0.,-1.,0.)); +#264654 = FACE_BOUND('',#264655,.F.); +#264655 = EDGE_LOOP('',(#264656)); +#264656 = ORIENTED_EDGE('',*,*,#264657,.T.); +#264657 = EDGE_CURVE('',#264658,#264658,#264660,.T.); +#264658 = VERTEX_POINT('',#264659); +#264659 = CARTESIAN_POINT('',(112.27165,-56.8231,0.)); +#264660 = CIRCLE('',#264661,0.5); +#264661 = AXIS2_PLACEMENT_3D('',#264662,#264663,#264664); +#264662 = CARTESIAN_POINT('',(112.27165,-56.3231,0.)); +#264663 = DIRECTION('',(-0.,0.,-1.)); +#264664 = DIRECTION('',(-0.,-1.,0.)); +#264665 = FACE_BOUND('',#264666,.F.); +#264666 = EDGE_LOOP('',(#264667)); +#264667 = ORIENTED_EDGE('',*,*,#264668,.T.); +#264668 = EDGE_CURVE('',#264669,#264669,#264671,.T.); +#264669 = VERTEX_POINT('',#264670); +#264670 = CARTESIAN_POINT('',(114.81165,-56.8231,0.)); +#264671 = CIRCLE('',#264672,0.5); +#264672 = AXIS2_PLACEMENT_3D('',#264673,#264674,#264675); +#264673 = CARTESIAN_POINT('',(114.81165,-56.3231,0.)); +#264674 = DIRECTION('',(-0.,0.,-1.)); +#264675 = DIRECTION('',(-0.,-1.,0.)); +#264676 = FACE_BOUND('',#264677,.F.); +#264677 = EDGE_LOOP('',(#264678)); +#264678 = ORIENTED_EDGE('',*,*,#264679,.T.); +#264679 = EDGE_CURVE('',#264680,#264680,#264682,.T.); +#264680 = VERTEX_POINT('',#264681); +#264681 = CARTESIAN_POINT('',(85.19165,-46.9231,0.)); +#264682 = CIRCLE('',#264683,1.6); +#264683 = AXIS2_PLACEMENT_3D('',#264684,#264685,#264686); +#264684 = CARTESIAN_POINT('',(85.19165,-45.3231,0.)); +#264685 = DIRECTION('',(-0.,0.,-1.)); +#264686 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#264687 = FACE_BOUND('',#264688,.F.); +#264688 = EDGE_LOOP('',(#264689)); +#264689 = ORIENTED_EDGE('',*,*,#264690,.T.); +#264690 = EDGE_CURVE('',#264691,#264691,#264693,.T.); +#264691 = VERTEX_POINT('',#264692); +#264692 = CARTESIAN_POINT('',(98.19165,-46.7981,0.)); +#264693 = CIRCLE('',#264694,0.475); +#264694 = AXIS2_PLACEMENT_3D('',#264695,#264696,#264697); +#264695 = CARTESIAN_POINT('',(98.19165,-46.3231,0.)); +#264696 = DIRECTION('',(-0.,0.,-1.)); +#264697 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264698 = FACE_BOUND('',#264699,.F.); +#264699 = EDGE_LOOP('',(#264700)); +#264700 = ORIENTED_EDGE('',*,*,#264701,.T.); +#264701 = EDGE_CURVE('',#264702,#264702,#264704,.T.); +#264702 = VERTEX_POINT('',#264703); +#264703 = CARTESIAN_POINT('',(111.19165,-51.9031,0.)); +#264704 = CIRCLE('',#264705,0.5); +#264705 = AXIS2_PLACEMENT_3D('',#264706,#264707,#264708); +#264706 = CARTESIAN_POINT('',(111.19165,-51.4031,0.)); +#264707 = DIRECTION('',(-0.,0.,-1.)); +#264708 = DIRECTION('',(-0.,-1.,0.)); +#264709 = FACE_BOUND('',#264710,.F.); +#264710 = EDGE_LOOP('',(#264711)); +#264711 = ORIENTED_EDGE('',*,*,#264712,.T.); +#264712 = EDGE_CURVE('',#264713,#264713,#264715,.T.); +#264713 = VERTEX_POINT('',#264714); +#264714 = CARTESIAN_POINT('',(100.69165,-46.7981,0.)); +#264715 = CIRCLE('',#264716,0.475); +#264716 = AXIS2_PLACEMENT_3D('',#264717,#264718,#264719); +#264717 = CARTESIAN_POINT('',(100.69165,-46.3231,0.)); +#264718 = DIRECTION('',(-0.,0.,-1.)); +#264719 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264720 = FACE_BOUND('',#264721,.F.); +#264721 = EDGE_LOOP('',(#264722)); +#264722 = ORIENTED_EDGE('',*,*,#264723,.T.); +#264723 = EDGE_CURVE('',#264724,#264724,#264726,.T.); +#264724 = VERTEX_POINT('',#264725); +#264725 = CARTESIAN_POINT('',(103.19165,-46.7981,0.)); +#264726 = CIRCLE('',#264727,0.475); +#264727 = AXIS2_PLACEMENT_3D('',#264728,#264729,#264730); +#264728 = CARTESIAN_POINT('',(103.19165,-46.3231,0.)); +#264729 = DIRECTION('',(-0.,0.,-1.)); +#264730 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264731 = FACE_BOUND('',#264732,.F.); +#264732 = EDGE_LOOP('',(#264733)); +#264733 = ORIENTED_EDGE('',*,*,#264734,.T.); +#264734 = EDGE_CURVE('',#264735,#264735,#264737,.T.); +#264735 = VERTEX_POINT('',#264736); +#264736 = CARTESIAN_POINT('',(105.69165,-46.7981,0.)); +#264737 = CIRCLE('',#264738,0.475); +#264738 = AXIS2_PLACEMENT_3D('',#264739,#264740,#264741); +#264739 = CARTESIAN_POINT('',(105.69165,-46.3231,0.)); +#264740 = DIRECTION('',(-0.,0.,-1.)); +#264741 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264742 = FACE_BOUND('',#264743,.F.); +#264743 = EDGE_LOOP('',(#264744)); +#264744 = ORIENTED_EDGE('',*,*,#264745,.T.); +#264745 = EDGE_CURVE('',#264746,#264746,#264748,.T.); +#264746 = VERTEX_POINT('',#264747); +#264747 = CARTESIAN_POINT('',(111.19165,-49.3631,0.)); +#264748 = CIRCLE('',#264749,0.5); +#264749 = AXIS2_PLACEMENT_3D('',#264750,#264751,#264752); +#264750 = CARTESIAN_POINT('',(111.19165,-48.8631,0.)); +#264751 = DIRECTION('',(-0.,0.,-1.)); +#264752 = DIRECTION('',(-0.,-1.,0.)); +#264753 = FACE_BOUND('',#264754,.F.); +#264754 = EDGE_LOOP('',(#264755)); +#264755 = ORIENTED_EDGE('',*,*,#264756,.T.); +#264756 = EDGE_CURVE('',#264757,#264757,#264759,.T.); +#264757 = VERTEX_POINT('',#264758); +#264758 = CARTESIAN_POINT('',(111.19165,-46.8231,0.)); +#264759 = CIRCLE('',#264760,0.5); +#264760 = AXIS2_PLACEMENT_3D('',#264761,#264762,#264763); +#264761 = CARTESIAN_POINT('',(111.19165,-46.3231,0.)); +#264762 = DIRECTION('',(-0.,0.,-1.)); +#264763 = DIRECTION('',(-0.,-1.,0.)); +#264764 = FACE_BOUND('',#264765,.F.); +#264765 = EDGE_LOOP('',(#264766)); +#264766 = ORIENTED_EDGE('',*,*,#264767,.T.); +#264767 = EDGE_CURVE('',#264768,#264768,#264770,.T.); +#264768 = VERTEX_POINT('',#264769); +#264769 = CARTESIAN_POINT('',(117.35165,-56.8231,0.)); +#264770 = CIRCLE('',#264771,0.5); +#264771 = AXIS2_PLACEMENT_3D('',#264772,#264773,#264774); +#264772 = CARTESIAN_POINT('',(117.35165,-56.3231,0.)); +#264773 = DIRECTION('',(-0.,0.,-1.)); +#264774 = DIRECTION('',(-0.,-1.,0.)); +#264775 = FACE_BOUND('',#264776,.F.); +#264776 = EDGE_LOOP('',(#264777)); +#264777 = ORIENTED_EDGE('',*,*,#264778,.T.); +#264778 = EDGE_CURVE('',#264779,#264779,#264781,.T.); +#264779 = VERTEX_POINT('',#264780); +#264780 = CARTESIAN_POINT('',(119.89165,-56.8231,0.)); +#264781 = CIRCLE('',#264782,0.5); +#264782 = AXIS2_PLACEMENT_3D('',#264783,#264784,#264785); +#264783 = CARTESIAN_POINT('',(119.89165,-56.3231,0.)); +#264784 = DIRECTION('',(-0.,0.,-1.)); +#264785 = DIRECTION('',(-0.,-1.,0.)); +#264786 = FACE_BOUND('',#264787,.F.); +#264787 = EDGE_LOOP('',(#264788)); +#264788 = ORIENTED_EDGE('',*,*,#264789,.T.); +#264789 = EDGE_CURVE('',#264790,#264790,#264792,.T.); +#264790 = VERTEX_POINT('',#264791); +#264791 = CARTESIAN_POINT('',(122.43165,-56.8231,0.)); +#264792 = CIRCLE('',#264793,0.5); +#264793 = AXIS2_PLACEMENT_3D('',#264794,#264795,#264796); +#264794 = CARTESIAN_POINT('',(122.43165,-56.3231,0.)); +#264795 = DIRECTION('',(-0.,0.,-1.)); +#264796 = DIRECTION('',(-0.,-1.,0.)); +#264797 = FACE_BOUND('',#264798,.F.); +#264798 = EDGE_LOOP('',(#264799)); +#264799 = ORIENTED_EDGE('',*,*,#264800,.T.); +#264800 = EDGE_CURVE('',#264801,#264801,#264803,.T.); +#264801 = VERTEX_POINT('',#264802); +#264802 = CARTESIAN_POINT('',(124.97165,-56.8231,0.)); +#264803 = CIRCLE('',#264804,0.5); +#264804 = AXIS2_PLACEMENT_3D('',#264805,#264806,#264807); +#264805 = CARTESIAN_POINT('',(124.97165,-56.3231,0.)); +#264806 = DIRECTION('',(-0.,0.,-1.)); +#264807 = DIRECTION('',(-0.,-1.,0.)); +#264808 = FACE_BOUND('',#264809,.F.); +#264809 = EDGE_LOOP('',(#264810)); +#264810 = ORIENTED_EDGE('',*,*,#264811,.T.); +#264811 = EDGE_CURVE('',#264812,#264812,#264814,.T.); +#264812 = VERTEX_POINT('',#264813); +#264813 = CARTESIAN_POINT('',(127.51165,-56.8231,0.)); +#264814 = CIRCLE('',#264815,0.5); +#264815 = AXIS2_PLACEMENT_3D('',#264816,#264817,#264818); +#264816 = CARTESIAN_POINT('',(127.51165,-56.3231,0.)); +#264817 = DIRECTION('',(-0.,0.,-1.)); +#264818 = DIRECTION('',(-0.,-1.,0.)); +#264819 = FACE_BOUND('',#264820,.F.); +#264820 = EDGE_LOOP('',(#264821)); +#264821 = ORIENTED_EDGE('',*,*,#264822,.T.); +#264822 = EDGE_CURVE('',#264823,#264823,#264825,.T.); +#264823 = VERTEX_POINT('',#264824); +#264824 = CARTESIAN_POINT('',(130.05165,-56.8231,0.)); +#264825 = CIRCLE('',#264826,0.5); +#264826 = AXIS2_PLACEMENT_3D('',#264827,#264828,#264829); +#264827 = CARTESIAN_POINT('',(130.05165,-56.3231,0.)); +#264828 = DIRECTION('',(-0.,0.,-1.)); +#264829 = DIRECTION('',(-0.,-1.,0.)); +#264830 = FACE_BOUND('',#264831,.F.); +#264831 = EDGE_LOOP('',(#264832)); +#264832 = ORIENTED_EDGE('',*,*,#264833,.T.); +#264833 = EDGE_CURVE('',#264834,#264834,#264836,.T.); +#264834 = VERTEX_POINT('',#264835); +#264835 = CARTESIAN_POINT('',(132.59165,-56.8231,0.)); +#264836 = CIRCLE('',#264837,0.5); +#264837 = AXIS2_PLACEMENT_3D('',#264838,#264839,#264840); +#264838 = CARTESIAN_POINT('',(132.59165,-56.3231,0.)); +#264839 = DIRECTION('',(-0.,0.,-1.)); +#264840 = DIRECTION('',(-0.,-1.,0.)); +#264841 = FACE_BOUND('',#264842,.F.); +#264842 = EDGE_LOOP('',(#264843)); +#264843 = ORIENTED_EDGE('',*,*,#264844,.T.); +#264844 = EDGE_CURVE('',#264845,#264845,#264847,.T.); +#264845 = VERTEX_POINT('',#264846); +#264846 = CARTESIAN_POINT('',(135.13165,-56.8231,0.)); +#264847 = CIRCLE('',#264848,0.5); +#264848 = AXIS2_PLACEMENT_3D('',#264849,#264850,#264851); +#264849 = CARTESIAN_POINT('',(135.13165,-56.3231,0.)); +#264850 = DIRECTION('',(-0.,0.,-1.)); +#264851 = DIRECTION('',(-0.,-1.,0.)); +#264852 = FACE_BOUND('',#264853,.F.); +#264853 = EDGE_LOOP('',(#264854)); +#264854 = ORIENTED_EDGE('',*,*,#264855,.T.); +#264855 = EDGE_CURVE('',#264856,#264856,#264858,.T.); +#264856 = VERTEX_POINT('',#264857); +#264857 = CARTESIAN_POINT('',(137.67165,-56.8231,0.)); +#264858 = CIRCLE('',#264859,0.5); +#264859 = AXIS2_PLACEMENT_3D('',#264860,#264861,#264862); +#264860 = CARTESIAN_POINT('',(137.67165,-56.3231,0.)); +#264861 = DIRECTION('',(-0.,0.,-1.)); +#264862 = DIRECTION('',(-0.,-1.,0.)); +#264863 = FACE_BOUND('',#264864,.F.); +#264864 = EDGE_LOOP('',(#264865)); +#264865 = ORIENTED_EDGE('',*,*,#264866,.T.); +#264866 = EDGE_CURVE('',#264867,#264867,#264869,.T.); +#264867 = VERTEX_POINT('',#264868); +#264868 = CARTESIAN_POINT('',(140.21165,-56.8231,0.)); +#264869 = CIRCLE('',#264870,0.5); +#264870 = AXIS2_PLACEMENT_3D('',#264871,#264872,#264873); +#264871 = CARTESIAN_POINT('',(140.21165,-56.3231,0.)); +#264872 = DIRECTION('',(-0.,0.,-1.)); +#264873 = DIRECTION('',(-0.,-1.,0.)); +#264874 = FACE_BOUND('',#264875,.F.); +#264875 = EDGE_LOOP('',(#264876)); +#264876 = ORIENTED_EDGE('',*,*,#264877,.T.); +#264877 = EDGE_CURVE('',#264878,#264878,#264880,.T.); +#264878 = VERTEX_POINT('',#264879); +#264879 = CARTESIAN_POINT('',(142.75165,-56.8231,0.)); +#264880 = CIRCLE('',#264881,0.5); +#264881 = AXIS2_PLACEMENT_3D('',#264882,#264883,#264884); +#264882 = CARTESIAN_POINT('',(142.75165,-56.3231,0.)); +#264883 = DIRECTION('',(-0.,0.,-1.)); +#264884 = DIRECTION('',(-0.,-1.,0.)); +#264885 = FACE_BOUND('',#264886,.F.); +#264886 = EDGE_LOOP('',(#264887)); +#264887 = ORIENTED_EDGE('',*,*,#264888,.T.); +#264888 = EDGE_CURVE('',#264889,#264889,#264891,.T.); +#264889 = VERTEX_POINT('',#264890); +#264890 = CARTESIAN_POINT('',(145.29165,-56.8231,0.)); +#264891 = CIRCLE('',#264892,0.5); +#264892 = AXIS2_PLACEMENT_3D('',#264893,#264894,#264895); +#264893 = CARTESIAN_POINT('',(145.29165,-56.3231,0.)); +#264894 = DIRECTION('',(-0.,0.,-1.)); +#264895 = DIRECTION('',(-0.,-1.,0.)); +#264896 = FACE_BOUND('',#264897,.F.); +#264897 = EDGE_LOOP('',(#264898)); +#264898 = ORIENTED_EDGE('',*,*,#264899,.T.); +#264899 = EDGE_CURVE('',#264900,#264900,#264902,.T.); +#264900 = VERTEX_POINT('',#264901); +#264901 = CARTESIAN_POINT('',(147.83165,-56.8231,0.)); +#264902 = CIRCLE('',#264903,0.5); +#264903 = AXIS2_PLACEMENT_3D('',#264904,#264905,#264906); +#264904 = CARTESIAN_POINT('',(147.83165,-56.3231,0.)); +#264905 = DIRECTION('',(-0.,0.,-1.)); +#264906 = DIRECTION('',(-0.,-1.,0.)); +#264907 = FACE_BOUND('',#264908,.F.); +#264908 = EDGE_LOOP('',(#264909)); +#264909 = ORIENTED_EDGE('',*,*,#264910,.T.); +#264910 = EDGE_CURVE('',#264911,#264911,#264913,.T.); +#264911 = VERTEX_POINT('',#264912); +#264912 = CARTESIAN_POINT('',(116.19165,-46.7981,0.)); +#264913 = CIRCLE('',#264914,0.475); +#264914 = AXIS2_PLACEMENT_3D('',#264915,#264916,#264917); +#264915 = CARTESIAN_POINT('',(116.19165,-46.3231,0.)); +#264916 = DIRECTION('',(-0.,0.,-1.)); +#264917 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264918 = FACE_BOUND('',#264919,.F.); +#264919 = EDGE_LOOP('',(#264920)); +#264920 = ORIENTED_EDGE('',*,*,#264921,.T.); +#264921 = EDGE_CURVE('',#264922,#264922,#264924,.T.); +#264922 = VERTEX_POINT('',#264923); +#264923 = CARTESIAN_POINT('',(118.69165,-46.7981,0.)); +#264924 = CIRCLE('',#264925,0.475); +#264925 = AXIS2_PLACEMENT_3D('',#264926,#264927,#264928); +#264926 = CARTESIAN_POINT('',(118.69165,-46.3231,0.)); +#264927 = DIRECTION('',(-0.,0.,-1.)); +#264928 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264929 = FACE_BOUND('',#264930,.F.); +#264930 = EDGE_LOOP('',(#264931)); +#264931 = ORIENTED_EDGE('',*,*,#264932,.T.); +#264932 = EDGE_CURVE('',#264933,#264933,#264935,.T.); +#264933 = VERTEX_POINT('',#264934); +#264934 = CARTESIAN_POINT('',(121.19165,-46.7981,0.)); +#264935 = CIRCLE('',#264936,0.475); +#264936 = AXIS2_PLACEMENT_3D('',#264937,#264938,#264939); +#264937 = CARTESIAN_POINT('',(121.19165,-46.3231,0.)); +#264938 = DIRECTION('',(-0.,0.,-1.)); +#264939 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#264940 = FACE_BOUND('',#264941,.F.); +#264941 = EDGE_LOOP('',(#264942)); +#264942 = ORIENTED_EDGE('',*,*,#264943,.T.); +#264943 = EDGE_CURVE('',#264944,#264944,#264946,.T.); +#264944 = VERTEX_POINT('',#264945); +#264945 = CARTESIAN_POINT('',(127.19165,-46.8231,0.)); +#264946 = CIRCLE('',#264947,0.5); +#264947 = AXIS2_PLACEMENT_3D('',#264948,#264949,#264950); +#264948 = CARTESIAN_POINT('',(127.19165,-46.3231,0.)); +#264949 = DIRECTION('',(-0.,0.,-1.)); +#264950 = DIRECTION('',(-0.,-1.,0.)); +#264951 = FACE_BOUND('',#264952,.F.); +#264952 = EDGE_LOOP('',(#264953)); +#264953 = ORIENTED_EDGE('',*,*,#264954,.T.); +#264954 = EDGE_CURVE('',#264955,#264955,#264957,.T.); +#264955 = VERTEX_POINT('',#264956); +#264956 = CARTESIAN_POINT('',(129.69165,-46.8231,0.)); +#264957 = CIRCLE('',#264958,0.5); +#264958 = AXIS2_PLACEMENT_3D('',#264959,#264960,#264961); +#264959 = CARTESIAN_POINT('',(129.69165,-46.3231,0.)); +#264960 = DIRECTION('',(-0.,0.,-1.)); +#264961 = DIRECTION('',(-0.,-1.,0.)); +#264962 = FACE_BOUND('',#264963,.F.); +#264963 = EDGE_LOOP('',(#264964)); +#264964 = ORIENTED_EDGE('',*,*,#264965,.T.); +#264965 = EDGE_CURVE('',#264966,#264966,#264968,.T.); +#264966 = VERTEX_POINT('',#264967); +#264967 = CARTESIAN_POINT('',(135.79165,-46.8231,0.)); +#264968 = CIRCLE('',#264969,0.5); +#264969 = AXIS2_PLACEMENT_3D('',#264970,#264971,#264972); +#264970 = CARTESIAN_POINT('',(135.79165,-46.3231,0.)); +#264971 = DIRECTION('',(-0.,0.,-1.)); +#264972 = DIRECTION('',(-0.,-1.,0.)); +#264973 = FACE_BOUND('',#264974,.F.); +#264974 = EDGE_LOOP('',(#264975)); +#264975 = ORIENTED_EDGE('',*,*,#264976,.T.); +#264976 = EDGE_CURVE('',#264977,#264977,#264979,.T.); +#264977 = VERTEX_POINT('',#264978); +#264978 = CARTESIAN_POINT('',(138.29165,-46.8231,0.)); +#264979 = CIRCLE('',#264980,0.5); +#264980 = AXIS2_PLACEMENT_3D('',#264981,#264982,#264983); +#264981 = CARTESIAN_POINT('',(138.29165,-46.3231,0.)); +#264982 = DIRECTION('',(-0.,0.,-1.)); +#264983 = DIRECTION('',(-0.,-1.,0.)); +#264984 = FACE_BOUND('',#264985,.F.); +#264985 = EDGE_LOOP('',(#264986)); +#264986 = ORIENTED_EDGE('',*,*,#264987,.T.); +#264987 = EDGE_CURVE('',#264988,#264988,#264990,.T.); +#264988 = VERTEX_POINT('',#264989); +#264989 = CARTESIAN_POINT('',(148.27165,-81.8231,0.)); +#264990 = CIRCLE('',#264991,0.5); +#264991 = AXIS2_PLACEMENT_3D('',#264992,#264993,#264994); +#264992 = CARTESIAN_POINT('',(148.27165,-81.3231,0.)); +#264993 = DIRECTION('',(-0.,0.,-1.)); +#264994 = DIRECTION('',(-0.,-1.,0.)); +#264995 = FACE_BOUND('',#264996,.F.); +#264996 = EDGE_LOOP('',(#264997)); +#264997 = ORIENTED_EDGE('',*,*,#264998,.T.); +#264998 = EDGE_CURVE('',#264999,#264999,#265001,.T.); +#264999 = VERTEX_POINT('',#265000); +#265000 = CARTESIAN_POINT('',(150.81165,-81.8231,0.)); +#265001 = CIRCLE('',#265002,0.5); +#265002 = AXIS2_PLACEMENT_3D('',#265003,#265004,#265005); +#265003 = CARTESIAN_POINT('',(150.81165,-81.3231,0.)); +#265004 = DIRECTION('',(-0.,0.,-1.)); +#265005 = DIRECTION('',(-0.,-1.,0.)); +#265006 = FACE_BOUND('',#265007,.F.); +#265007 = EDGE_LOOP('',(#265008)); +#265008 = ORIENTED_EDGE('',*,*,#265009,.T.); +#265009 = EDGE_CURVE('',#265010,#265010,#265012,.T.); +#265010 = VERTEX_POINT('',#265011); +#265011 = CARTESIAN_POINT('',(174.19165,-91.2231,0.)); +#265012 = CIRCLE('',#265013,0.4); +#265013 = AXIS2_PLACEMENT_3D('',#265014,#265015,#265016); +#265014 = CARTESIAN_POINT('',(174.19165,-90.8231,0.)); +#265015 = DIRECTION('',(-0.,0.,-1.)); +#265016 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265017 = FACE_BOUND('',#265018,.F.); +#265018 = EDGE_LOOP('',(#265019)); +#265019 = ORIENTED_EDGE('',*,*,#265020,.T.); +#265020 = EDGE_CURVE('',#265021,#265021,#265023,.T.); +#265021 = VERTEX_POINT('',#265022); +#265022 = CARTESIAN_POINT('',(174.19165,-89.2231,0.)); +#265023 = CIRCLE('',#265024,0.4); +#265024 = AXIS2_PLACEMENT_3D('',#265025,#265026,#265027); +#265025 = CARTESIAN_POINT('',(174.19165,-88.8231,0.)); +#265026 = DIRECTION('',(-0.,0.,-1.)); +#265027 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265028 = FACE_BOUND('',#265029,.F.); +#265029 = EDGE_LOOP('',(#265030)); +#265030 = ORIENTED_EDGE('',*,*,#265031,.T.); +#265031 = EDGE_CURVE('',#265032,#265032,#265034,.T.); +#265032 = VERTEX_POINT('',#265033); +#265033 = CARTESIAN_POINT('',(174.19165,-87.2231,0.)); +#265034 = CIRCLE('',#265035,0.4); +#265035 = AXIS2_PLACEMENT_3D('',#265036,#265037,#265038); +#265036 = CARTESIAN_POINT('',(174.19165,-86.8231,0.)); +#265037 = DIRECTION('',(-0.,0.,-1.)); +#265038 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265039 = FACE_BOUND('',#265040,.F.); +#265040 = EDGE_LOOP('',(#265041)); +#265041 = ORIENTED_EDGE('',*,*,#265042,.T.); +#265042 = EDGE_CURVE('',#265043,#265043,#265045,.T.); +#265043 = VERTEX_POINT('',#265044); +#265044 = CARTESIAN_POINT('',(174.19165,-85.2231,0.)); +#265045 = CIRCLE('',#265046,0.4); +#265046 = AXIS2_PLACEMENT_3D('',#265047,#265048,#265049); +#265047 = CARTESIAN_POINT('',(174.19165,-84.8231,0.)); +#265048 = DIRECTION('',(-0.,0.,-1.)); +#265049 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265050 = FACE_BOUND('',#265051,.F.); +#265051 = EDGE_LOOP('',(#265052)); +#265052 = ORIENTED_EDGE('',*,*,#265053,.T.); +#265053 = EDGE_CURVE('',#265054,#265054,#265056,.T.); +#265054 = VERTEX_POINT('',#265055); +#265055 = CARTESIAN_POINT('',(174.19165,-83.2231,0.)); +#265056 = CIRCLE('',#265057,0.4); +#265057 = AXIS2_PLACEMENT_3D('',#265058,#265059,#265060); +#265058 = CARTESIAN_POINT('',(174.19165,-82.8231,0.)); +#265059 = DIRECTION('',(-0.,0.,-1.)); +#265060 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265061 = FACE_BOUND('',#265062,.F.); +#265062 = EDGE_LOOP('',(#265063)); +#265063 = ORIENTED_EDGE('',*,*,#265064,.T.); +#265064 = EDGE_CURVE('',#265065,#265065,#265067,.T.); +#265065 = VERTEX_POINT('',#265066); +#265066 = CARTESIAN_POINT('',(174.19165,-81.2231,0.)); +#265067 = CIRCLE('',#265068,0.4); +#265068 = AXIS2_PLACEMENT_3D('',#265069,#265070,#265071); +#265069 = CARTESIAN_POINT('',(174.19165,-80.8231,0.)); +#265070 = DIRECTION('',(-0.,0.,-1.)); +#265071 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265072 = FACE_BOUND('',#265073,.F.); +#265073 = EDGE_LOOP('',(#265074)); +#265074 = ORIENTED_EDGE('',*,*,#265075,.T.); +#265075 = EDGE_CURVE('',#265076,#265076,#265078,.T.); +#265076 = VERTEX_POINT('',#265077); +#265077 = CARTESIAN_POINT('',(150.37165,-74.6031,0.)); +#265078 = CIRCLE('',#265079,0.5); +#265079 = AXIS2_PLACEMENT_3D('',#265080,#265081,#265082); +#265080 = CARTESIAN_POINT('',(150.37165,-74.1031,0.)); +#265081 = DIRECTION('',(-0.,0.,-1.)); +#265082 = DIRECTION('',(-0.,-1.,0.)); +#265083 = FACE_BOUND('',#265084,.F.); +#265084 = EDGE_LOOP('',(#265085)); +#265085 = ORIENTED_EDGE('',*,*,#265086,.T.); +#265086 = EDGE_CURVE('',#265087,#265087,#265089,.T.); +#265087 = VERTEX_POINT('',#265088); +#265088 = CARTESIAN_POINT('',(152.91165,-74.6031,0.)); +#265089 = CIRCLE('',#265090,0.5); +#265090 = AXIS2_PLACEMENT_3D('',#265091,#265092,#265093); +#265091 = CARTESIAN_POINT('',(152.91165,-74.1031,0.)); +#265092 = DIRECTION('',(-0.,0.,-1.)); +#265093 = DIRECTION('',(-0.,-1.,0.)); +#265094 = FACE_BOUND('',#265095,.F.); +#265095 = EDGE_LOOP('',(#265096)); +#265096 = ORIENTED_EDGE('',*,*,#265097,.T.); +#265097 = EDGE_CURVE('',#265098,#265098,#265100,.T.); +#265098 = VERTEX_POINT('',#265099); +#265099 = CARTESIAN_POINT('',(155.45165,-74.6031,0.)); +#265100 = CIRCLE('',#265101,0.5); +#265101 = AXIS2_PLACEMENT_3D('',#265102,#265103,#265104); +#265102 = CARTESIAN_POINT('',(155.45165,-74.1031,0.)); +#265103 = DIRECTION('',(-0.,0.,-1.)); +#265104 = DIRECTION('',(-0.,-1.,0.)); +#265105 = FACE_BOUND('',#265106,.F.); +#265106 = EDGE_LOOP('',(#265107)); +#265107 = ORIENTED_EDGE('',*,*,#265108,.T.); +#265108 = EDGE_CURVE('',#265109,#265109,#265111,.T.); +#265109 = VERTEX_POINT('',#265110); +#265110 = CARTESIAN_POINT('',(174.19165,-79.2231,0.)); +#265111 = CIRCLE('',#265112,0.4); +#265112 = AXIS2_PLACEMENT_3D('',#265113,#265114,#265115); +#265113 = CARTESIAN_POINT('',(174.19165,-78.8231,0.)); +#265114 = DIRECTION('',(-0.,0.,-1.)); +#265115 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265116 = FACE_BOUND('',#265117,.F.); +#265117 = EDGE_LOOP('',(#265118)); +#265118 = ORIENTED_EDGE('',*,*,#265119,.T.); +#265119 = EDGE_CURVE('',#265120,#265120,#265122,.T.); +#265120 = VERTEX_POINT('',#265121); +#265121 = CARTESIAN_POINT('',(174.19165,-77.2231,0.)); +#265122 = CIRCLE('',#265123,0.4); +#265123 = AXIS2_PLACEMENT_3D('',#265124,#265125,#265126); +#265124 = CARTESIAN_POINT('',(174.19165,-76.8231,0.)); +#265125 = DIRECTION('',(-0.,0.,-1.)); +#265126 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265127 = FACE_BOUND('',#265128,.F.); +#265128 = EDGE_LOOP('',(#265129)); +#265129 = ORIENTED_EDGE('',*,*,#265130,.T.); +#265130 = EDGE_CURVE('',#265131,#265131,#265133,.T.); +#265131 = VERTEX_POINT('',#265132); +#265132 = CARTESIAN_POINT('',(174.19165,-75.2231,0.)); +#265133 = CIRCLE('',#265134,0.4); +#265134 = AXIS2_PLACEMENT_3D('',#265135,#265136,#265137); +#265135 = CARTESIAN_POINT('',(174.19165,-74.8231,0.)); +#265136 = DIRECTION('',(-0.,0.,-1.)); +#265137 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#265138 = FACE_BOUND('',#265139,.F.); +#265139 = EDGE_LOOP('',(#265140)); +#265140 = ORIENTED_EDGE('',*,*,#265141,.T.); +#265141 = EDGE_CURVE('',#265142,#265142,#265144,.T.); +#265142 = VERTEX_POINT('',#265143); +#265143 = CARTESIAN_POINT('',(196.54165,-91.2231,0.)); +#265144 = CIRCLE('',#265145,0.4); +#265145 = AXIS2_PLACEMENT_3D('',#265146,#265147,#265148); +#265146 = CARTESIAN_POINT('',(196.54165,-90.8231,0.)); +#265147 = DIRECTION('',(-0.,0.,-1.)); +#265148 = DIRECTION('',(-0.,-1.,0.)); +#265149 = FACE_BOUND('',#265150,.F.); +#265150 = EDGE_LOOP('',(#265151)); +#265151 = ORIENTED_EDGE('',*,*,#265152,.T.); +#265152 = EDGE_CURVE('',#265153,#265153,#265155,.T.); +#265153 = VERTEX_POINT('',#265154); +#265154 = CARTESIAN_POINT('',(196.54165,-89.2231,0.)); +#265155 = CIRCLE('',#265156,0.4); +#265156 = AXIS2_PLACEMENT_3D('',#265157,#265158,#265159); +#265157 = CARTESIAN_POINT('',(196.54165,-88.8231,0.)); +#265158 = DIRECTION('',(-0.,0.,-1.)); +#265159 = DIRECTION('',(-0.,-1.,0.)); +#265160 = FACE_BOUND('',#265161,.F.); +#265161 = EDGE_LOOP('',(#265162)); +#265162 = ORIENTED_EDGE('',*,*,#265163,.T.); +#265163 = EDGE_CURVE('',#265164,#265164,#265166,.T.); +#265164 = VERTEX_POINT('',#265165); +#265165 = CARTESIAN_POINT('',(196.54165,-87.2231,0.)); +#265166 = CIRCLE('',#265167,0.4); +#265167 = AXIS2_PLACEMENT_3D('',#265168,#265169,#265170); +#265168 = CARTESIAN_POINT('',(196.54165,-86.8231,0.)); +#265169 = DIRECTION('',(-0.,0.,-1.)); +#265170 = DIRECTION('',(-0.,-1.,0.)); +#265171 = FACE_BOUND('',#265172,.F.); +#265172 = EDGE_LOOP('',(#265173)); +#265173 = ORIENTED_EDGE('',*,*,#265174,.T.); +#265174 = EDGE_CURVE('',#265175,#265175,#265177,.T.); +#265175 = VERTEX_POINT('',#265176); +#265176 = CARTESIAN_POINT('',(196.54165,-85.2231,0.)); +#265177 = CIRCLE('',#265178,0.4); +#265178 = AXIS2_PLACEMENT_3D('',#265179,#265180,#265181); +#265179 = CARTESIAN_POINT('',(196.54165,-84.8231,0.)); +#265180 = DIRECTION('',(-0.,0.,-1.)); +#265181 = DIRECTION('',(-0.,-1.,0.)); +#265182 = FACE_BOUND('',#265183,.F.); +#265183 = EDGE_LOOP('',(#265184)); +#265184 = ORIENTED_EDGE('',*,*,#265185,.T.); +#265185 = EDGE_CURVE('',#265186,#265186,#265188,.T.); +#265186 = VERTEX_POINT('',#265187); +#265187 = CARTESIAN_POINT('',(196.54165,-83.2231,0.)); +#265188 = CIRCLE('',#265189,0.4); +#265189 = AXIS2_PLACEMENT_3D('',#265190,#265191,#265192); +#265190 = CARTESIAN_POINT('',(196.54165,-82.8231,0.)); +#265191 = DIRECTION('',(-0.,0.,-1.)); +#265192 = DIRECTION('',(-0.,-1.,0.)); +#265193 = FACE_BOUND('',#265194,.F.); +#265194 = EDGE_LOOP('',(#265195)); +#265195 = ORIENTED_EDGE('',*,*,#265196,.T.); +#265196 = EDGE_CURVE('',#265197,#265197,#265199,.T.); +#265197 = VERTEX_POINT('',#265198); +#265198 = CARTESIAN_POINT('',(196.54165,-81.2231,0.)); +#265199 = CIRCLE('',#265200,0.4); +#265200 = AXIS2_PLACEMENT_3D('',#265201,#265202,#265203); +#265201 = CARTESIAN_POINT('',(196.54165,-80.8231,0.)); +#265202 = DIRECTION('',(-0.,0.,-1.)); +#265203 = DIRECTION('',(-0.,-1.,0.)); +#265204 = FACE_BOUND('',#265205,.F.); +#265205 = EDGE_LOOP('',(#265206)); +#265206 = ORIENTED_EDGE('',*,*,#265207,.T.); +#265207 = EDGE_CURVE('',#265208,#265208,#265210,.T.); +#265208 = VERTEX_POINT('',#265209); +#265209 = CARTESIAN_POINT('',(210.19165,-90.7981,0.)); +#265210 = CIRCLE('',#265211,0.475); +#265211 = AXIS2_PLACEMENT_3D('',#265212,#265213,#265214); +#265212 = CARTESIAN_POINT('',(210.19165,-90.3231,0.)); +#265213 = DIRECTION('',(-0.,0.,-1.)); +#265214 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265215 = FACE_BOUND('',#265216,.F.); +#265216 = EDGE_LOOP('',(#265217)); +#265217 = ORIENTED_EDGE('',*,*,#265218,.T.); +#265218 = EDGE_CURVE('',#265219,#265219,#265221,.T.); +#265219 = VERTEX_POINT('',#265220); +#265220 = CARTESIAN_POINT('',(210.19165,-88.2981,0.)); +#265221 = CIRCLE('',#265222,0.475); +#265222 = AXIS2_PLACEMENT_3D('',#265223,#265224,#265225); +#265223 = CARTESIAN_POINT('',(210.19165,-87.8231,0.)); +#265224 = DIRECTION('',(-0.,0.,-1.)); +#265225 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265226 = FACE_BOUND('',#265227,.F.); +#265227 = EDGE_LOOP('',(#265228)); +#265228 = ORIENTED_EDGE('',*,*,#265229,.T.); +#265229 = EDGE_CURVE('',#265230,#265230,#265232,.T.); +#265230 = VERTEX_POINT('',#265231); +#265231 = CARTESIAN_POINT('',(210.16665,-80.5731,0.)); +#265232 = CIRCLE('',#265233,0.5); +#265233 = AXIS2_PLACEMENT_3D('',#265234,#265235,#265236); +#265234 = CARTESIAN_POINT('',(210.16665,-80.0731,0.)); +#265235 = DIRECTION('',(-0.,0.,-1.)); +#265236 = DIRECTION('',(-0.,-1.,0.)); +#265237 = FACE_BOUND('',#265238,.F.); +#265238 = EDGE_LOOP('',(#265239)); +#265239 = ORIENTED_EDGE('',*,*,#265240,.T.); +#265240 = EDGE_CURVE('',#265241,#265241,#265243,.T.); +#265241 = VERTEX_POINT('',#265242); +#265242 = CARTESIAN_POINT('',(196.54165,-79.2231,0.)); +#265243 = CIRCLE('',#265244,0.4); +#265244 = AXIS2_PLACEMENT_3D('',#265245,#265246,#265247); +#265245 = CARTESIAN_POINT('',(196.54165,-78.8231,0.)); +#265246 = DIRECTION('',(-0.,0.,-1.)); +#265247 = DIRECTION('',(-0.,-1.,0.)); +#265248 = FACE_BOUND('',#265249,.F.); +#265249 = EDGE_LOOP('',(#265250)); +#265250 = ORIENTED_EDGE('',*,*,#265251,.T.); +#265251 = EDGE_CURVE('',#265252,#265252,#265254,.T.); +#265252 = VERTEX_POINT('',#265253); +#265253 = CARTESIAN_POINT('',(196.54165,-77.2231,0.)); +#265254 = CIRCLE('',#265255,0.4); +#265255 = AXIS2_PLACEMENT_3D('',#265256,#265257,#265258); +#265256 = CARTESIAN_POINT('',(196.54165,-76.8231,0.)); +#265257 = DIRECTION('',(-0.,0.,-1.)); +#265258 = DIRECTION('',(-0.,-1.,0.)); +#265259 = FACE_BOUND('',#265260,.F.); +#265260 = EDGE_LOOP('',(#265261)); +#265261 = ORIENTED_EDGE('',*,*,#265262,.T.); +#265262 = EDGE_CURVE('',#265263,#265263,#265265,.T.); +#265263 = VERTEX_POINT('',#265264); +#265264 = CARTESIAN_POINT('',(196.54165,-75.2231,0.)); +#265265 = CIRCLE('',#265266,0.4); +#265266 = AXIS2_PLACEMENT_3D('',#265267,#265268,#265269); +#265267 = CARTESIAN_POINT('',(196.54165,-74.8231,0.)); +#265268 = DIRECTION('',(-0.,0.,-1.)); +#265269 = DIRECTION('',(-0.,-1.,0.)); +#265270 = FACE_BOUND('',#265271,.F.); +#265271 = EDGE_LOOP('',(#265272)); +#265272 = ORIENTED_EDGE('',*,*,#265273,.T.); +#265273 = EDGE_CURVE('',#265274,#265274,#265276,.T.); +#265274 = VERTEX_POINT('',#265275); +#265275 = CARTESIAN_POINT('',(210.16665,-78.0731,0.)); +#265276 = CIRCLE('',#265277,0.5); +#265277 = AXIS2_PLACEMENT_3D('',#265278,#265279,#265280); +#265278 = CARTESIAN_POINT('',(210.16665,-77.5731,0.)); +#265279 = DIRECTION('',(-0.,0.,-1.)); +#265280 = DIRECTION('',(-0.,-1.,0.)); +#265281 = FACE_BOUND('',#265282,.F.); +#265282 = EDGE_LOOP('',(#265283)); +#265283 = ORIENTED_EDGE('',*,*,#265284,.T.); +#265284 = EDGE_CURVE('',#265285,#265285,#265287,.T.); +#265285 = VERTEX_POINT('',#265286); +#265286 = CARTESIAN_POINT('',(210.16665,-71.3231,0.)); +#265287 = CIRCLE('',#265288,0.5); +#265288 = AXIS2_PLACEMENT_3D('',#265289,#265290,#265291); +#265289 = CARTESIAN_POINT('',(210.16665,-70.8231,0.)); +#265290 = DIRECTION('',(-0.,0.,-1.)); +#265291 = DIRECTION('',(-0.,-1.,0.)); +#265292 = FACE_BOUND('',#265293,.F.); +#265293 = EDGE_LOOP('',(#265294)); +#265294 = ORIENTED_EDGE('',*,*,#265295,.T.); +#265295 = EDGE_CURVE('',#265296,#265296,#265298,.T.); +#265296 = VERTEX_POINT('',#265297); +#265297 = CARTESIAN_POINT('',(210.16665,-68.8231,0.)); +#265298 = CIRCLE('',#265299,0.5); +#265299 = AXIS2_PLACEMENT_3D('',#265300,#265301,#265302); +#265300 = CARTESIAN_POINT('',(210.16665,-68.3231,0.)); +#265301 = DIRECTION('',(-0.,0.,-1.)); +#265302 = DIRECTION('',(-0.,-1.,0.)); +#265303 = FACE_BOUND('',#265304,.F.); +#265304 = EDGE_LOOP('',(#265305)); +#265305 = ORIENTED_EDGE('',*,*,#265306,.T.); +#265306 = EDGE_CURVE('',#265307,#265307,#265309,.T.); +#265307 = VERTEX_POINT('',#265308); +#265308 = CARTESIAN_POINT('',(150.37165,-56.8231,0.)); +#265309 = CIRCLE('',#265310,0.5); +#265310 = AXIS2_PLACEMENT_3D('',#265311,#265312,#265313); +#265311 = CARTESIAN_POINT('',(150.37165,-56.3231,0.)); +#265312 = DIRECTION('',(-0.,0.,-1.)); +#265313 = DIRECTION('',(-0.,-1.,0.)); +#265314 = FACE_BOUND('',#265315,.F.); +#265315 = EDGE_LOOP('',(#265316)); +#265316 = ORIENTED_EDGE('',*,*,#265317,.T.); +#265317 = EDGE_CURVE('',#265318,#265318,#265320,.T.); +#265318 = VERTEX_POINT('',#265319); +#265319 = CARTESIAN_POINT('',(152.91165,-56.8231,0.)); +#265320 = CIRCLE('',#265321,0.5); +#265321 = AXIS2_PLACEMENT_3D('',#265322,#265323,#265324); +#265322 = CARTESIAN_POINT('',(152.91165,-56.3231,0.)); +#265323 = DIRECTION('',(-0.,0.,-1.)); +#265324 = DIRECTION('',(-0.,-1.,0.)); +#265325 = FACE_BOUND('',#265326,.F.); +#265326 = EDGE_LOOP('',(#265327)); +#265327 = ORIENTED_EDGE('',*,*,#265328,.T.); +#265328 = EDGE_CURVE('',#265329,#265329,#265331,.T.); +#265329 = VERTEX_POINT('',#265330); +#265330 = CARTESIAN_POINT('',(155.45165,-56.8231,0.)); +#265331 = CIRCLE('',#265332,0.5); +#265332 = AXIS2_PLACEMENT_3D('',#265333,#265334,#265335); +#265333 = CARTESIAN_POINT('',(155.45165,-56.3231,0.)); +#265334 = DIRECTION('',(-0.,0.,-1.)); +#265335 = DIRECTION('',(-0.,-1.,0.)); +#265336 = FACE_BOUND('',#265337,.F.); +#265337 = EDGE_LOOP('',(#265338)); +#265338 = ORIENTED_EDGE('',*,*,#265339,.T.); +#265339 = EDGE_CURVE('',#265340,#265340,#265342,.T.); +#265340 = VERTEX_POINT('',#265341); +#265341 = CARTESIAN_POINT('',(189.28415,-66.5256,0.)); +#265342 = CIRCLE('',#265343,0.5); +#265343 = AXIS2_PLACEMENT_3D('',#265344,#265345,#265346); +#265344 = CARTESIAN_POINT('',(189.28415,-66.0256,0.)); +#265345 = DIRECTION('',(-0.,0.,-1.)); +#265346 = DIRECTION('',(-0.,-1.,0.)); +#265347 = FACE_BOUND('',#265348,.F.); +#265348 = EDGE_LOOP('',(#265349)); +#265349 = ORIENTED_EDGE('',*,*,#265350,.T.); +#265350 = EDGE_CURVE('',#265351,#265351,#265353,.T.); +#265351 = VERTEX_POINT('',#265352); +#265352 = CARTESIAN_POINT('',(194.36415,-66.5256,0.)); +#265353 = CIRCLE('',#265354,0.5); +#265354 = AXIS2_PLACEMENT_3D('',#265355,#265356,#265357); +#265355 = CARTESIAN_POINT('',(194.36415,-66.0256,0.)); +#265356 = DIRECTION('',(-0.,0.,-1.)); +#265357 = DIRECTION('',(-0.,-1.,0.)); +#265358 = FACE_BOUND('',#265359,.F.); +#265359 = EDGE_LOOP('',(#265360)); +#265360 = ORIENTED_EDGE('',*,*,#265361,.T.); +#265361 = EDGE_CURVE('',#265362,#265362,#265364,.T.); +#265362 = VERTEX_POINT('',#265363); +#265363 = CARTESIAN_POINT('',(189.28415,-58.9056,0.)); +#265364 = CIRCLE('',#265365,0.5); +#265365 = AXIS2_PLACEMENT_3D('',#265366,#265367,#265368); +#265366 = CARTESIAN_POINT('',(189.28415,-58.4056,0.)); +#265367 = DIRECTION('',(-0.,0.,-1.)); +#265368 = DIRECTION('',(-0.,-1.,0.)); +#265369 = FACE_BOUND('',#265370,.F.); +#265370 = EDGE_LOOP('',(#265371)); +#265371 = ORIENTED_EDGE('',*,*,#265372,.T.); +#265372 = EDGE_CURVE('',#265373,#265373,#265375,.T.); +#265373 = VERTEX_POINT('',#265374); +#265374 = CARTESIAN_POINT('',(189.28415,-56.3656,0.)); +#265375 = CIRCLE('',#265376,0.5); +#265376 = AXIS2_PLACEMENT_3D('',#265377,#265378,#265379); +#265377 = CARTESIAN_POINT('',(189.28415,-55.8656,0.)); +#265378 = DIRECTION('',(-0.,0.,-1.)); +#265379 = DIRECTION('',(-0.,-1.,0.)); +#265380 = FACE_BOUND('',#265381,.F.); +#265381 = EDGE_LOOP('',(#265382)); +#265382 = ORIENTED_EDGE('',*,*,#265383,.T.); +#265383 = EDGE_CURVE('',#265384,#265384,#265386,.T.); +#265384 = VERTEX_POINT('',#265385); +#265385 = CARTESIAN_POINT('',(194.36415,-58.9056,0.)); +#265386 = CIRCLE('',#265387,0.5); +#265387 = AXIS2_PLACEMENT_3D('',#265388,#265389,#265390); +#265388 = CARTESIAN_POINT('',(194.36415,-58.4056,0.)); +#265389 = DIRECTION('',(-0.,0.,-1.)); +#265390 = DIRECTION('',(-0.,-1.,0.)); +#265391 = FACE_BOUND('',#265392,.F.); +#265392 = EDGE_LOOP('',(#265393)); +#265393 = ORIENTED_EDGE('',*,*,#265394,.T.); +#265394 = EDGE_CURVE('',#265395,#265395,#265397,.T.); +#265395 = VERTEX_POINT('',#265396); +#265396 = CARTESIAN_POINT('',(194.36415,-56.3656,0.)); +#265397 = CIRCLE('',#265398,0.5); +#265398 = AXIS2_PLACEMENT_3D('',#265399,#265400,#265401); +#265399 = CARTESIAN_POINT('',(194.36415,-55.8656,0.)); +#265400 = DIRECTION('',(-0.,0.,-1.)); +#265401 = DIRECTION('',(-0.,-1.,0.)); +#265402 = FACE_BOUND('',#265403,.F.); +#265403 = EDGE_LOOP('',(#265404)); +#265404 = ORIENTED_EDGE('',*,*,#265405,.T.); +#265405 = EDGE_CURVE('',#265406,#265406,#265408,.T.); +#265406 = VERTEX_POINT('',#265407); +#265407 = CARTESIAN_POINT('',(210.19165,-62.2981,0.)); +#265408 = CIRCLE('',#265409,0.475); +#265409 = AXIS2_PLACEMENT_3D('',#265410,#265411,#265412); +#265410 = CARTESIAN_POINT('',(210.19165,-61.8231,0.)); +#265411 = DIRECTION('',(-0.,0.,-1.)); +#265412 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265413 = FACE_BOUND('',#265414,.F.); +#265414 = EDGE_LOOP('',(#265415)); +#265415 = ORIENTED_EDGE('',*,*,#265416,.T.); +#265416 = EDGE_CURVE('',#265417,#265417,#265419,.T.); +#265417 = VERTEX_POINT('',#265418); +#265418 = CARTESIAN_POINT('',(210.19165,-59.7981,0.)); +#265419 = CIRCLE('',#265420,0.475); +#265420 = AXIS2_PLACEMENT_3D('',#265421,#265422,#265423); +#265421 = CARTESIAN_POINT('',(210.19165,-59.3231,0.)); +#265422 = DIRECTION('',(-0.,0.,-1.)); +#265423 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265424 = FACE_BOUND('',#265425,.F.); +#265425 = EDGE_LOOP('',(#265426)); +#265426 = ORIENTED_EDGE('',*,*,#265427,.T.); +#265427 = EDGE_CURVE('',#265428,#265428,#265430,.T.); +#265428 = VERTEX_POINT('',#265429); +#265429 = CARTESIAN_POINT('',(210.19165,-57.2981,0.)); +#265430 = CIRCLE('',#265431,0.475); +#265431 = AXIS2_PLACEMENT_3D('',#265432,#265433,#265434); +#265432 = CARTESIAN_POINT('',(210.19165,-56.8231,0.)); +#265433 = DIRECTION('',(-0.,0.,-1.)); +#265434 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265435 = FACE_BOUND('',#265436,.F.); +#265436 = EDGE_LOOP('',(#265437)); +#265437 = ORIENTED_EDGE('',*,*,#265438,.T.); +#265438 = EDGE_CURVE('',#265439,#265439,#265441,.T.); +#265439 = VERTEX_POINT('',#265440); +#265440 = CARTESIAN_POINT('',(210.19165,-54.7981,0.)); +#265441 = CIRCLE('',#265442,0.475); +#265442 = AXIS2_PLACEMENT_3D('',#265443,#265444,#265445); +#265443 = CARTESIAN_POINT('',(210.19165,-54.3231,0.)); +#265444 = DIRECTION('',(-0.,0.,-1.)); +#265445 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#265446 = FACE_BOUND('',#265447,.F.); +#265447 = EDGE_LOOP('',(#265448)); +#265448 = ORIENTED_EDGE('',*,*,#265449,.T.); +#265449 = EDGE_CURVE('',#265450,#265450,#265452,.T.); +#265450 = VERTEX_POINT('',#265451); +#265451 = CARTESIAN_POINT('',(211.19165,-46.9231,0.)); +#265452 = CIRCLE('',#265453,1.6); +#265453 = AXIS2_PLACEMENT_3D('',#265454,#265455,#265456); +#265454 = CARTESIAN_POINT('',(211.19165,-45.3231,0.)); +#265455 = DIRECTION('',(-0.,0.,-1.)); +#265456 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#265457 = PLANE('',#265458); +#265458 = AXIS2_PLACEMENT_3D('',#265459,#265460,#265461); +#265459 = CARTESIAN_POINT('',(0.,0.,0.)); +#265460 = DIRECTION('',(0.,0.,1.)); +#265461 = DIRECTION('',(1.,0.,-0.)); +#265462 = ADVANCED_FACE('',(#265463,#265474,#265485,#265496,#265507, + #265518,#265529,#265540,#265551,#265562,#265573,#265584,#265595, + #265606,#265617,#265653,#265664,#265675,#265711,#265722,#265733, + #265744,#265755,#265766,#265777,#265788,#265799,#265835,#265846, + #265857,#265868,#265879,#265890,#265901,#265937,#265948,#265959, + #265970,#265981,#265992,#266003,#266014,#266025,#266036,#266047, + #266058,#266069,#266080,#266091,#266102,#266113,#266124,#266135, + #266146,#266157,#266168,#266179,#266190,#266201,#266212,#266223, + #266234,#266245,#266256,#266267,#266278,#266289,#266300,#266311, + #266322,#266333,#266344,#266355,#266366,#266377,#266388,#266399, + #266410,#266421,#266432,#266443,#266454,#266465,#266476,#266487, + #266498,#266509,#266520,#266531,#266542,#266553,#266564,#266575, + #266586,#266597,#266608,#266619,#266630,#266641,#266652,#266663, + #266674,#266685,#266696,#266707,#266718,#266729,#266740,#266751, + #266762,#266773,#266784,#266795,#266806,#266817,#266828,#266839, + #266850,#266861,#266872,#266883,#266894,#266905,#266916,#266927, + #266938,#266949,#266960,#266971,#266982,#266993,#267004,#267015, + #267026,#267037,#267048,#267059,#267070,#267081,#267092,#267103, + #267114,#267125,#267136,#267147,#267158,#267169,#267180,#267191, + #267202,#267213,#267224,#267235,#267246,#267257,#267268,#267279, + #267290,#267301,#267312,#267323,#267334,#267345),#267356,.T.); +#265463 = FACE_BOUND('',#265464,.T.); +#265464 = EDGE_LOOP('',(#265465,#265466,#265467,#265473)); +#265465 = ORIENTED_EDGE('',*,*,#263475,.F.); +#265466 = ORIENTED_EDGE('',*,*,#263515,.F.); +#265467 = ORIENTED_EDGE('',*,*,#265468,.F.); +#265468 = EDGE_CURVE('',#263538,#263508,#265469,.T.); +#265469 = LINE('',#265470,#265471); +#265470 = CARTESIAN_POINT('',(80.19165,-40.3231,1.51)); +#265471 = VECTOR('',#265472,1.); +#265472 = DIRECTION('',(1.,0.,0.)); +#265473 = ORIENTED_EDGE('',*,*,#263537,.F.); +#265474 = FACE_BOUND('',#265475,.T.); +#265475 = EDGE_LOOP('',(#265476)); +#265476 = ORIENTED_EDGE('',*,*,#265477,.T.); +#265477 = EDGE_CURVE('',#265478,#265478,#265480,.T.); +#265478 = VERTEX_POINT('',#265479); +#265479 = CARTESIAN_POINT('',(85.19165,-136.9231,1.51)); +#265480 = CIRCLE('',#265481,1.6); +#265481 = AXIS2_PLACEMENT_3D('',#265482,#265483,#265484); +#265482 = CARTESIAN_POINT('',(85.19165,-135.3231,1.51)); +#265483 = DIRECTION('',(-0.,0.,-1.)); +#265484 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#265485 = FACE_BOUND('',#265486,.T.); +#265486 = EDGE_LOOP('',(#265487)); +#265487 = ORIENTED_EDGE('',*,*,#265488,.T.); +#265488 = EDGE_CURVE('',#265489,#265489,#265491,.T.); +#265489 = VERTEX_POINT('',#265490); +#265490 = CARTESIAN_POINT('',(115.25165,-130.0831,1.51)); +#265491 = CIRCLE('',#265492,0.5); +#265492 = AXIS2_PLACEMENT_3D('',#265493,#265494,#265495); +#265493 = CARTESIAN_POINT('',(115.25165,-129.5831,1.51)); +#265494 = DIRECTION('',(-0.,0.,-1.)); +#265495 = DIRECTION('',(-0.,-1.,0.)); +#265496 = FACE_BOUND('',#265497,.T.); +#265497 = EDGE_LOOP('',(#265498)); +#265498 = ORIENTED_EDGE('',*,*,#265499,.T.); +#265499 = EDGE_CURVE('',#265500,#265500,#265502,.T.); +#265500 = VERTEX_POINT('',#265501); +#265501 = CARTESIAN_POINT('',(117.79165,-130.0831,1.51)); +#265502 = CIRCLE('',#265503,0.5); +#265503 = AXIS2_PLACEMENT_3D('',#265504,#265505,#265506); +#265504 = CARTESIAN_POINT('',(117.79165,-129.5831,1.51)); +#265505 = DIRECTION('',(-0.,0.,-1.)); +#265506 = DIRECTION('',(-0.,-1.,0.)); +#265507 = FACE_BOUND('',#265508,.T.); +#265508 = EDGE_LOOP('',(#265509)); +#265509 = ORIENTED_EDGE('',*,*,#265510,.T.); +#265510 = EDGE_CURVE('',#265511,#265511,#265513,.T.); +#265511 = VERTEX_POINT('',#265512); +#265512 = CARTESIAN_POINT('',(120.33165,-130.0831,1.51)); +#265513 = CIRCLE('',#265514,0.5); +#265514 = AXIS2_PLACEMENT_3D('',#265515,#265516,#265517); +#265515 = CARTESIAN_POINT('',(120.33165,-129.5831,1.51)); +#265516 = DIRECTION('',(-0.,0.,-1.)); +#265517 = DIRECTION('',(-0.,-1.,0.)); +#265518 = FACE_BOUND('',#265519,.T.); +#265519 = EDGE_LOOP('',(#265520)); +#265520 = ORIENTED_EDGE('',*,*,#265521,.T.); +#265521 = EDGE_CURVE('',#265522,#265522,#265524,.T.); +#265522 = VERTEX_POINT('',#265523); +#265523 = CARTESIAN_POINT('',(122.87165,-130.0831,1.51)); +#265524 = CIRCLE('',#265525,0.5); +#265525 = AXIS2_PLACEMENT_3D('',#265526,#265527,#265528); +#265526 = CARTESIAN_POINT('',(122.87165,-129.5831,1.51)); +#265527 = DIRECTION('',(-0.,0.,-1.)); +#265528 = DIRECTION('',(-0.,-1.,0.)); +#265529 = FACE_BOUND('',#265530,.T.); +#265530 = EDGE_LOOP('',(#265531)); +#265531 = ORIENTED_EDGE('',*,*,#265532,.T.); +#265532 = EDGE_CURVE('',#265533,#265533,#265535,.T.); +#265533 = VERTEX_POINT('',#265534); +#265534 = CARTESIAN_POINT('',(125.41165,-130.0831,1.51)); +#265535 = CIRCLE('',#265536,0.5); +#265536 = AXIS2_PLACEMENT_3D('',#265537,#265538,#265539); +#265537 = CARTESIAN_POINT('',(125.41165,-129.5831,1.51)); +#265538 = DIRECTION('',(-0.,0.,-1.)); +#265539 = DIRECTION('',(-0.,-1.,0.)); +#265540 = FACE_BOUND('',#265541,.T.); +#265541 = EDGE_LOOP('',(#265542)); +#265542 = ORIENTED_EDGE('',*,*,#265543,.T.); +#265543 = EDGE_CURVE('',#265544,#265544,#265546,.T.); +#265544 = VERTEX_POINT('',#265545); +#265545 = CARTESIAN_POINT('',(127.95165,-130.0831,1.51)); +#265546 = CIRCLE('',#265547,0.5); +#265547 = AXIS2_PLACEMENT_3D('',#265548,#265549,#265550); +#265548 = CARTESIAN_POINT('',(127.95165,-129.5831,1.51)); +#265549 = DIRECTION('',(-0.,0.,-1.)); +#265550 = DIRECTION('',(-0.,-1.,0.)); +#265551 = FACE_BOUND('',#265552,.T.); +#265552 = EDGE_LOOP('',(#265553)); +#265553 = ORIENTED_EDGE('',*,*,#265554,.T.); +#265554 = EDGE_CURVE('',#265555,#265555,#265557,.T.); +#265555 = VERTEX_POINT('',#265556); +#265556 = CARTESIAN_POINT('',(130.49165,-130.0831,1.51)); +#265557 = CIRCLE('',#265558,0.5); +#265558 = AXIS2_PLACEMENT_3D('',#265559,#265560,#265561); +#265559 = CARTESIAN_POINT('',(130.49165,-129.5831,1.51)); +#265560 = DIRECTION('',(-0.,0.,-1.)); +#265561 = DIRECTION('',(-0.,-1.,0.)); +#265562 = FACE_BOUND('',#265563,.T.); +#265563 = EDGE_LOOP('',(#265564)); +#265564 = ORIENTED_EDGE('',*,*,#265565,.T.); +#265565 = EDGE_CURVE('',#265566,#265566,#265568,.T.); +#265566 = VERTEX_POINT('',#265567); +#265567 = CARTESIAN_POINT('',(133.03165,-130.0831,1.51)); +#265568 = CIRCLE('',#265569,0.5); +#265569 = AXIS2_PLACEMENT_3D('',#265570,#265571,#265572); +#265570 = CARTESIAN_POINT('',(133.03165,-129.5831,1.51)); +#265571 = DIRECTION('',(-0.,0.,-1.)); +#265572 = DIRECTION('',(-0.,-1.,0.)); +#265573 = FACE_BOUND('',#265574,.T.); +#265574 = EDGE_LOOP('',(#265575)); +#265575 = ORIENTED_EDGE('',*,*,#265576,.T.); +#265576 = EDGE_CURVE('',#265577,#265577,#265579,.T.); +#265577 = VERTEX_POINT('',#265578); +#265578 = CARTESIAN_POINT('',(138.11165,-130.0831,1.51)); +#265579 = CIRCLE('',#265580,0.5); +#265580 = AXIS2_PLACEMENT_3D('',#265581,#265582,#265583); +#265581 = CARTESIAN_POINT('',(138.11165,-129.5831,1.51)); +#265582 = DIRECTION('',(-0.,0.,-1.)); +#265583 = DIRECTION('',(-0.,-1.,0.)); +#265584 = FACE_BOUND('',#265585,.T.); +#265585 = EDGE_LOOP('',(#265586)); +#265586 = ORIENTED_EDGE('',*,*,#265587,.T.); +#265587 = EDGE_CURVE('',#265588,#265588,#265590,.T.); +#265588 = VERTEX_POINT('',#265589); +#265589 = CARTESIAN_POINT('',(140.65165,-130.0831,1.51)); +#265590 = CIRCLE('',#265591,0.5); +#265591 = AXIS2_PLACEMENT_3D('',#265592,#265593,#265594); +#265592 = CARTESIAN_POINT('',(140.65165,-129.5831,1.51)); +#265593 = DIRECTION('',(-0.,0.,-1.)); +#265594 = DIRECTION('',(-0.,-1.,0.)); +#265595 = FACE_BOUND('',#265596,.T.); +#265596 = EDGE_LOOP('',(#265597)); +#265597 = ORIENTED_EDGE('',*,*,#265598,.T.); +#265598 = EDGE_CURVE('',#265599,#265599,#265601,.T.); +#265599 = VERTEX_POINT('',#265600); +#265600 = CARTESIAN_POINT('',(143.19165,-130.0831,1.51)); +#265601 = CIRCLE('',#265602,0.5); +#265602 = AXIS2_PLACEMENT_3D('',#265603,#265604,#265605); +#265603 = CARTESIAN_POINT('',(143.19165,-129.5831,1.51)); +#265604 = DIRECTION('',(-0.,0.,-1.)); +#265605 = DIRECTION('',(-0.,-1.,0.)); +#265606 = FACE_BOUND('',#265607,.T.); +#265607 = EDGE_LOOP('',(#265608)); +#265608 = ORIENTED_EDGE('',*,*,#265609,.T.); +#265609 = EDGE_CURVE('',#265610,#265610,#265612,.T.); +#265610 = VERTEX_POINT('',#265611); +#265611 = CARTESIAN_POINT('',(145.73165,-130.0831,1.51)); +#265612 = CIRCLE('',#265613,0.5); +#265613 = AXIS2_PLACEMENT_3D('',#265614,#265615,#265616); +#265614 = CARTESIAN_POINT('',(145.73165,-129.5831,1.51)); +#265615 = DIRECTION('',(-0.,0.,-1.)); +#265616 = DIRECTION('',(-0.,-1.,0.)); +#265617 = FACE_BOUND('',#265618,.T.); +#265618 = EDGE_LOOP('',(#265619,#265630,#265638,#265647)); +#265619 = ORIENTED_EDGE('',*,*,#265620,.T.); +#265620 = EDGE_CURVE('',#265621,#265623,#265625,.T.); +#265621 = VERTEX_POINT('',#265622); +#265622 = CARTESIAN_POINT('',(160.125,-134.185,1.51)); +#265623 = VERTEX_POINT('',#265624); +#265624 = CARTESIAN_POINT('',(159.525,-134.185,1.51)); +#265625 = CIRCLE('',#265626,0.3); +#265626 = AXIS2_PLACEMENT_3D('',#265627,#265628,#265629); +#265627 = CARTESIAN_POINT('',(159.825,-134.185,1.51)); +#265628 = DIRECTION('',(-0.,0.,-1.)); +#265629 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#265630 = ORIENTED_EDGE('',*,*,#265631,.T.); +#265631 = EDGE_CURVE('',#265623,#265632,#265634,.T.); +#265632 = VERTEX_POINT('',#265633); +#265633 = CARTESIAN_POINT('',(159.525,-133.385,1.51)); +#265634 = LINE('',#265635,#265636); +#265635 = CARTESIAN_POINT('',(159.525,-66.6925,1.51)); +#265636 = VECTOR('',#265637,1.); +#265637 = DIRECTION('',(-0.,1.,0.)); +#265638 = ORIENTED_EDGE('',*,*,#265639,.T.); +#265639 = EDGE_CURVE('',#265632,#265640,#265642,.T.); +#265640 = VERTEX_POINT('',#265641); +#265641 = CARTESIAN_POINT('',(160.125,-133.385,1.51)); +#265642 = CIRCLE('',#265643,0.3); +#265643 = AXIS2_PLACEMENT_3D('',#265644,#265645,#265646); +#265644 = CARTESIAN_POINT('',(159.825,-133.385,1.51)); +#265645 = DIRECTION('',(0.,-0.,-1.)); +#265646 = DIRECTION('',(1.,9.473903143469E-14,-0.)); +#265647 = ORIENTED_EDGE('',*,*,#265648,.T.); +#265648 = EDGE_CURVE('',#265640,#265621,#265649,.T.); +#265649 = LINE('',#265650,#265651); +#265650 = CARTESIAN_POINT('',(160.125,-67.0925,1.51)); +#265651 = VECTOR('',#265652,1.); +#265652 = DIRECTION('',(0.,-1.,0.)); +#265653 = FACE_BOUND('',#265654,.T.); +#265654 = EDGE_LOOP('',(#265655)); +#265655 = ORIENTED_EDGE('',*,*,#265656,.T.); +#265656 = EDGE_CURVE('',#265657,#265657,#265659,.T.); +#265657 = VERTEX_POINT('',#265658); +#265658 = CARTESIAN_POINT('',(148.27165,-130.0831,1.51)); +#265659 = CIRCLE('',#265660,0.5); +#265660 = AXIS2_PLACEMENT_3D('',#265661,#265662,#265663); +#265661 = CARTESIAN_POINT('',(148.27165,-129.5831,1.51)); +#265662 = DIRECTION('',(-0.,0.,-1.)); +#265663 = DIRECTION('',(-0.,-1.,0.)); +#265664 = FACE_BOUND('',#265665,.T.); +#265665 = EDGE_LOOP('',(#265666)); +#265666 = ORIENTED_EDGE('',*,*,#265667,.T.); +#265667 = EDGE_CURVE('',#265668,#265668,#265670,.T.); +#265668 = VERTEX_POINT('',#265669); +#265669 = CARTESIAN_POINT('',(150.81165,-130.0831,1.51)); +#265670 = CIRCLE('',#265671,0.5); +#265671 = AXIS2_PLACEMENT_3D('',#265672,#265673,#265674); +#265672 = CARTESIAN_POINT('',(150.81165,-129.5831,1.51)); +#265673 = DIRECTION('',(-0.,0.,-1.)); +#265674 = DIRECTION('',(-0.,-1.,0.)); +#265675 = FACE_BOUND('',#265676,.T.); +#265676 = EDGE_LOOP('',(#265677,#265688,#265696,#265705)); +#265677 = ORIENTED_EDGE('',*,*,#265678,.T.); +#265678 = EDGE_CURVE('',#265679,#265681,#265683,.T.); +#265679 = VERTEX_POINT('',#265680); +#265680 = CARTESIAN_POINT('',(160.125,-131.155,1.51)); +#265681 = VERTEX_POINT('',#265682); +#265682 = CARTESIAN_POINT('',(159.525,-131.155,1.51)); +#265683 = CIRCLE('',#265684,0.3); +#265684 = AXIS2_PLACEMENT_3D('',#265685,#265686,#265687); +#265685 = CARTESIAN_POINT('',(159.825,-131.155,1.51)); +#265686 = DIRECTION('',(-0.,0.,-1.)); +#265687 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#265688 = ORIENTED_EDGE('',*,*,#265689,.T.); +#265689 = EDGE_CURVE('',#265681,#265690,#265692,.T.); +#265690 = VERTEX_POINT('',#265691); +#265691 = CARTESIAN_POINT('',(159.525,-129.655,1.51)); +#265692 = LINE('',#265693,#265694); +#265693 = CARTESIAN_POINT('',(159.525,-64.8275,1.51)); +#265694 = VECTOR('',#265695,1.); +#265695 = DIRECTION('',(-0.,1.,0.)); +#265696 = ORIENTED_EDGE('',*,*,#265697,.T.); +#265697 = EDGE_CURVE('',#265690,#265698,#265700,.T.); +#265698 = VERTEX_POINT('',#265699); +#265699 = CARTESIAN_POINT('',(160.125,-129.655,1.51)); +#265700 = CIRCLE('',#265701,0.3); +#265701 = AXIS2_PLACEMENT_3D('',#265702,#265703,#265704); +#265702 = CARTESIAN_POINT('',(159.825,-129.655,1.51)); +#265703 = DIRECTION('',(0.,-0.,-1.)); +#265704 = DIRECTION('',(1.,-9.473903143469E-14,0.)); +#265705 = ORIENTED_EDGE('',*,*,#265706,.T.); +#265706 = EDGE_CURVE('',#265698,#265679,#265707,.T.); +#265707 = LINE('',#265708,#265709); +#265708 = CARTESIAN_POINT('',(160.125,-65.5775,1.51)); +#265709 = VECTOR('',#265710,1.); +#265710 = DIRECTION('',(0.,-1.,0.)); +#265711 = FACE_BOUND('',#265712,.T.); +#265712 = EDGE_LOOP('',(#265713)); +#265713 = ORIENTED_EDGE('',*,*,#265714,.T.); +#265714 = EDGE_CURVE('',#265715,#265715,#265717,.T.); +#265715 = VERTEX_POINT('',#265716); +#265716 = CARTESIAN_POINT('',(161.175,-130.975,1.51)); +#265717 = CIRCLE('',#265718,0.2); +#265718 = AXIS2_PLACEMENT_3D('',#265719,#265720,#265721); +#265719 = CARTESIAN_POINT('',(161.175,-130.775,1.51)); +#265720 = DIRECTION('',(-0.,0.,-1.)); +#265721 = DIRECTION('',(-0.,-1.,0.)); +#265722 = FACE_BOUND('',#265723,.T.); +#265723 = EDGE_LOOP('',(#265724)); +#265724 = ORIENTED_EDGE('',*,*,#265725,.T.); +#265725 = EDGE_CURVE('',#265726,#265726,#265728,.T.); +#265726 = VERTEX_POINT('',#265727); +#265727 = CARTESIAN_POINT('',(162.025,-130.975,1.51)); +#265728 = CIRCLE('',#265729,0.2); +#265729 = AXIS2_PLACEMENT_3D('',#265730,#265731,#265732); +#265730 = CARTESIAN_POINT('',(162.025,-130.775,1.51)); +#265731 = DIRECTION('',(-0.,0.,-1.)); +#265732 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265733 = FACE_BOUND('',#265734,.T.); +#265734 = EDGE_LOOP('',(#265735)); +#265735 = ORIENTED_EDGE('',*,*,#265736,.T.); +#265736 = EDGE_CURVE('',#265737,#265737,#265739,.T.); +#265737 = VERTEX_POINT('',#265738); +#265738 = CARTESIAN_POINT('',(162.875,-130.975,1.51)); +#265739 = CIRCLE('',#265740,0.2); +#265740 = AXIS2_PLACEMENT_3D('',#265741,#265742,#265743); +#265741 = CARTESIAN_POINT('',(162.875,-130.775,1.51)); +#265742 = DIRECTION('',(-0.,0.,-1.)); +#265743 = DIRECTION('',(-0.,-1.,0.)); +#265744 = FACE_BOUND('',#265745,.T.); +#265745 = EDGE_LOOP('',(#265746)); +#265746 = ORIENTED_EDGE('',*,*,#265747,.T.); +#265747 = EDGE_CURVE('',#265748,#265748,#265750,.T.); +#265748 = VERTEX_POINT('',#265749); +#265749 = CARTESIAN_POINT('',(163.725,-130.975,1.51)); +#265750 = CIRCLE('',#265751,0.2); +#265751 = AXIS2_PLACEMENT_3D('',#265752,#265753,#265754); +#265752 = CARTESIAN_POINT('',(163.725,-130.775,1.51)); +#265753 = DIRECTION('',(-0.,0.,-1.)); +#265754 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#265755 = FACE_BOUND('',#265756,.T.); +#265756 = EDGE_LOOP('',(#265757)); +#265757 = ORIENTED_EDGE('',*,*,#265758,.T.); +#265758 = EDGE_CURVE('',#265759,#265759,#265761,.T.); +#265759 = VERTEX_POINT('',#265760); +#265760 = CARTESIAN_POINT('',(161.175,-129.625,1.51)); +#265761 = CIRCLE('',#265762,0.2); +#265762 = AXIS2_PLACEMENT_3D('',#265763,#265764,#265765); +#265763 = CARTESIAN_POINT('',(161.175,-129.425,1.51)); +#265764 = DIRECTION('',(-0.,0.,-1.)); +#265765 = DIRECTION('',(-0.,-1.,0.)); +#265766 = FACE_BOUND('',#265767,.T.); +#265767 = EDGE_LOOP('',(#265768)); +#265768 = ORIENTED_EDGE('',*,*,#265769,.T.); +#265769 = EDGE_CURVE('',#265770,#265770,#265772,.T.); +#265770 = VERTEX_POINT('',#265771); +#265771 = CARTESIAN_POINT('',(162.025,-129.625,1.51)); +#265772 = CIRCLE('',#265773,0.2); +#265773 = AXIS2_PLACEMENT_3D('',#265774,#265775,#265776); +#265774 = CARTESIAN_POINT('',(162.025,-129.425,1.51)); +#265775 = DIRECTION('',(-0.,0.,-1.)); +#265776 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265777 = FACE_BOUND('',#265778,.T.); +#265778 = EDGE_LOOP('',(#265779)); +#265779 = ORIENTED_EDGE('',*,*,#265780,.T.); +#265780 = EDGE_CURVE('',#265781,#265781,#265783,.T.); +#265781 = VERTEX_POINT('',#265782); +#265782 = CARTESIAN_POINT('',(162.875,-129.625,1.51)); +#265783 = CIRCLE('',#265784,0.2); +#265784 = AXIS2_PLACEMENT_3D('',#265785,#265786,#265787); +#265785 = CARTESIAN_POINT('',(162.875,-129.425,1.51)); +#265786 = DIRECTION('',(-0.,0.,-1.)); +#265787 = DIRECTION('',(-0.,-1.,0.)); +#265788 = FACE_BOUND('',#265789,.T.); +#265789 = EDGE_LOOP('',(#265790)); +#265790 = ORIENTED_EDGE('',*,*,#265791,.T.); +#265791 = EDGE_CURVE('',#265792,#265792,#265794,.T.); +#265792 = VERTEX_POINT('',#265793); +#265793 = CARTESIAN_POINT('',(163.725,-129.625,1.51)); +#265794 = CIRCLE('',#265795,0.2); +#265795 = AXIS2_PLACEMENT_3D('',#265796,#265797,#265798); +#265796 = CARTESIAN_POINT('',(163.725,-129.425,1.51)); +#265797 = DIRECTION('',(-0.,0.,-1.)); +#265798 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#265799 = FACE_BOUND('',#265800,.T.); +#265800 = EDGE_LOOP('',(#265801,#265812,#265820,#265829)); +#265801 = ORIENTED_EDGE('',*,*,#265802,.T.); +#265802 = EDGE_CURVE('',#265803,#265805,#265807,.T.); +#265803 = VERTEX_POINT('',#265804); +#265804 = CARTESIAN_POINT('',(168.775,-134.185,1.51)); +#265805 = VERTEX_POINT('',#265806); +#265806 = CARTESIAN_POINT('',(168.175,-134.185,1.51)); +#265807 = CIRCLE('',#265808,0.3); +#265808 = AXIS2_PLACEMENT_3D('',#265809,#265810,#265811); +#265809 = CARTESIAN_POINT('',(168.475,-134.185,1.51)); +#265810 = DIRECTION('',(-0.,0.,-1.)); +#265811 = DIRECTION('',(-1.,0.,0.)); +#265812 = ORIENTED_EDGE('',*,*,#265813,.T.); +#265813 = EDGE_CURVE('',#265805,#265814,#265816,.T.); +#265814 = VERTEX_POINT('',#265815); +#265815 = CARTESIAN_POINT('',(168.175,-133.385,1.51)); +#265816 = LINE('',#265817,#265818); +#265817 = CARTESIAN_POINT('',(168.175,-66.6925,1.51)); +#265818 = VECTOR('',#265819,1.); +#265819 = DIRECTION('',(-0.,1.,0.)); +#265820 = ORIENTED_EDGE('',*,*,#265821,.T.); +#265821 = EDGE_CURVE('',#265814,#265822,#265824,.T.); +#265822 = VERTEX_POINT('',#265823); +#265823 = CARTESIAN_POINT('',(168.775,-133.385,1.51)); +#265824 = CIRCLE('',#265825,0.3); +#265825 = AXIS2_PLACEMENT_3D('',#265826,#265827,#265828); +#265826 = CARTESIAN_POINT('',(168.475,-133.385,1.51)); +#265827 = DIRECTION('',(0.,-0.,-1.)); +#265828 = DIRECTION('',(1.,9.473903143468E-14,-0.)); +#265829 = ORIENTED_EDGE('',*,*,#265830,.T.); +#265830 = EDGE_CURVE('',#265822,#265803,#265831,.T.); +#265831 = LINE('',#265832,#265833); +#265832 = CARTESIAN_POINT('',(168.775,-67.0925,1.51)); +#265833 = VECTOR('',#265834,1.); +#265834 = DIRECTION('',(0.,-1.,0.)); +#265835 = FACE_BOUND('',#265836,.T.); +#265836 = EDGE_LOOP('',(#265837)); +#265837 = ORIENTED_EDGE('',*,*,#265838,.T.); +#265838 = EDGE_CURVE('',#265839,#265839,#265841,.T.); +#265839 = VERTEX_POINT('',#265840); +#265840 = CARTESIAN_POINT('',(172.69165,-134.4731,1.51)); +#265841 = CIRCLE('',#265842,0.65); +#265842 = AXIS2_PLACEMENT_3D('',#265843,#265844,#265845); +#265843 = CARTESIAN_POINT('',(172.69165,-133.8231,1.51)); +#265844 = DIRECTION('',(-0.,0.,-1.)); +#265845 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#265846 = FACE_BOUND('',#265847,.T.); +#265847 = EDGE_LOOP('',(#265848)); +#265848 = ORIENTED_EDGE('',*,*,#265849,.T.); +#265849 = EDGE_CURVE('',#265850,#265850,#265852,.T.); +#265850 = VERTEX_POINT('',#265851); +#265851 = CARTESIAN_POINT('',(177.69165,-134.4731,1.51)); +#265852 = CIRCLE('',#265853,0.65); +#265853 = AXIS2_PLACEMENT_3D('',#265854,#265855,#265856); +#265854 = CARTESIAN_POINT('',(177.69165,-133.8231,1.51)); +#265855 = DIRECTION('',(-0.,0.,-1.)); +#265856 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#265857 = FACE_BOUND('',#265858,.T.); +#265858 = EDGE_LOOP('',(#265859)); +#265859 = ORIENTED_EDGE('',*,*,#265860,.T.); +#265860 = EDGE_CURVE('',#265861,#265861,#265863,.T.); +#265861 = VERTEX_POINT('',#265862); +#265862 = CARTESIAN_POINT('',(164.575,-130.975,1.51)); +#265863 = CIRCLE('',#265864,0.2); +#265864 = AXIS2_PLACEMENT_3D('',#265865,#265866,#265867); +#265865 = CARTESIAN_POINT('',(164.575,-130.775,1.51)); +#265866 = DIRECTION('',(-0.,0.,-1.)); +#265867 = DIRECTION('',(-0.,-1.,0.)); +#265868 = FACE_BOUND('',#265869,.T.); +#265869 = EDGE_LOOP('',(#265870)); +#265870 = ORIENTED_EDGE('',*,*,#265871,.T.); +#265871 = EDGE_CURVE('',#265872,#265872,#265874,.T.); +#265872 = VERTEX_POINT('',#265873); +#265873 = CARTESIAN_POINT('',(165.425,-130.975,1.51)); +#265874 = CIRCLE('',#265875,0.2); +#265875 = AXIS2_PLACEMENT_3D('',#265876,#265877,#265878); +#265876 = CARTESIAN_POINT('',(165.425,-130.775,1.51)); +#265877 = DIRECTION('',(-0.,0.,-1.)); +#265878 = DIRECTION('',(-0.,-1.,0.)); +#265879 = FACE_BOUND('',#265880,.T.); +#265880 = EDGE_LOOP('',(#265881)); +#265881 = ORIENTED_EDGE('',*,*,#265882,.T.); +#265882 = EDGE_CURVE('',#265883,#265883,#265885,.T.); +#265883 = VERTEX_POINT('',#265884); +#265884 = CARTESIAN_POINT('',(166.275,-130.975,1.51)); +#265885 = CIRCLE('',#265886,0.2); +#265886 = AXIS2_PLACEMENT_3D('',#265887,#265888,#265889); +#265887 = CARTESIAN_POINT('',(166.275,-130.775,1.51)); +#265888 = DIRECTION('',(-0.,0.,-1.)); +#265889 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265890 = FACE_BOUND('',#265891,.T.); +#265891 = EDGE_LOOP('',(#265892)); +#265892 = ORIENTED_EDGE('',*,*,#265893,.T.); +#265893 = EDGE_CURVE('',#265894,#265894,#265896,.T.); +#265894 = VERTEX_POINT('',#265895); +#265895 = CARTESIAN_POINT('',(167.125,-130.975,1.51)); +#265896 = CIRCLE('',#265897,0.2); +#265897 = AXIS2_PLACEMENT_3D('',#265898,#265899,#265900); +#265898 = CARTESIAN_POINT('',(167.125,-130.775,1.51)); +#265899 = DIRECTION('',(-0.,0.,-1.)); +#265900 = DIRECTION('',(-0.,-1.,0.)); +#265901 = FACE_BOUND('',#265902,.T.); +#265902 = EDGE_LOOP('',(#265903,#265914,#265922,#265931)); +#265903 = ORIENTED_EDGE('',*,*,#265904,.T.); +#265904 = EDGE_CURVE('',#265905,#265907,#265909,.T.); +#265905 = VERTEX_POINT('',#265906); +#265906 = CARTESIAN_POINT('',(168.775,-131.155,1.51)); +#265907 = VERTEX_POINT('',#265908); +#265908 = CARTESIAN_POINT('',(168.175,-131.155,1.51)); +#265909 = CIRCLE('',#265910,0.3); +#265910 = AXIS2_PLACEMENT_3D('',#265911,#265912,#265913); +#265911 = CARTESIAN_POINT('',(168.475,-131.155,1.51)); +#265912 = DIRECTION('',(-0.,0.,-1.)); +#265913 = DIRECTION('',(-1.,0.,0.)); +#265914 = ORIENTED_EDGE('',*,*,#265915,.T.); +#265915 = EDGE_CURVE('',#265907,#265916,#265918,.T.); +#265916 = VERTEX_POINT('',#265917); +#265917 = CARTESIAN_POINT('',(168.175,-129.655,1.51)); +#265918 = LINE('',#265919,#265920); +#265919 = CARTESIAN_POINT('',(168.175,-64.8275,1.51)); +#265920 = VECTOR('',#265921,1.); +#265921 = DIRECTION('',(-0.,1.,0.)); +#265922 = ORIENTED_EDGE('',*,*,#265923,.T.); +#265923 = EDGE_CURVE('',#265916,#265924,#265926,.T.); +#265924 = VERTEX_POINT('',#265925); +#265925 = CARTESIAN_POINT('',(168.775,-129.655,1.51)); +#265926 = CIRCLE('',#265927,0.3); +#265927 = AXIS2_PLACEMENT_3D('',#265928,#265929,#265930); +#265928 = CARTESIAN_POINT('',(168.475,-129.655,1.51)); +#265929 = DIRECTION('',(0.,-0.,-1.)); +#265930 = DIRECTION('',(1.,0.,-0.)); +#265931 = ORIENTED_EDGE('',*,*,#265932,.T.); +#265932 = EDGE_CURVE('',#265924,#265905,#265933,.T.); +#265933 = LINE('',#265934,#265935); +#265934 = CARTESIAN_POINT('',(168.775,-65.5775,1.51)); +#265935 = VECTOR('',#265936,1.); +#265936 = DIRECTION('',(0.,-1.,0.)); +#265937 = FACE_BOUND('',#265938,.T.); +#265938 = EDGE_LOOP('',(#265939)); +#265939 = ORIENTED_EDGE('',*,*,#265940,.T.); +#265940 = EDGE_CURVE('',#265941,#265941,#265943,.T.); +#265941 = VERTEX_POINT('',#265942); +#265942 = CARTESIAN_POINT('',(164.575,-129.625,1.51)); +#265943 = CIRCLE('',#265944,0.2); +#265944 = AXIS2_PLACEMENT_3D('',#265945,#265946,#265947); +#265945 = CARTESIAN_POINT('',(164.575,-129.425,1.51)); +#265946 = DIRECTION('',(-0.,0.,-1.)); +#265947 = DIRECTION('',(-0.,-1.,0.)); +#265948 = FACE_BOUND('',#265949,.T.); +#265949 = EDGE_LOOP('',(#265950)); +#265950 = ORIENTED_EDGE('',*,*,#265951,.T.); +#265951 = EDGE_CURVE('',#265952,#265952,#265954,.T.); +#265952 = VERTEX_POINT('',#265953); +#265953 = CARTESIAN_POINT('',(165.425,-129.625,1.51)); +#265954 = CIRCLE('',#265955,0.2); +#265955 = AXIS2_PLACEMENT_3D('',#265956,#265957,#265958); +#265956 = CARTESIAN_POINT('',(165.425,-129.425,1.51)); +#265957 = DIRECTION('',(-0.,0.,-1.)); +#265958 = DIRECTION('',(-0.,-1.,0.)); +#265959 = FACE_BOUND('',#265960,.T.); +#265960 = EDGE_LOOP('',(#265961)); +#265961 = ORIENTED_EDGE('',*,*,#265962,.T.); +#265962 = EDGE_CURVE('',#265963,#265963,#265965,.T.); +#265963 = VERTEX_POINT('',#265964); +#265964 = CARTESIAN_POINT('',(166.275,-129.625,1.51)); +#265965 = CIRCLE('',#265966,0.2); +#265966 = AXIS2_PLACEMENT_3D('',#265967,#265968,#265969); +#265967 = CARTESIAN_POINT('',(166.275,-129.425,1.51)); +#265968 = DIRECTION('',(-0.,0.,-1.)); +#265969 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#265970 = FACE_BOUND('',#265971,.T.); +#265971 = EDGE_LOOP('',(#265972)); +#265972 = ORIENTED_EDGE('',*,*,#265973,.T.); +#265973 = EDGE_CURVE('',#265974,#265974,#265976,.T.); +#265974 = VERTEX_POINT('',#265975); +#265975 = CARTESIAN_POINT('',(167.125,-129.625,1.51)); +#265976 = CIRCLE('',#265977,0.2); +#265977 = AXIS2_PLACEMENT_3D('',#265978,#265979,#265980); +#265978 = CARTESIAN_POINT('',(167.125,-129.425,1.51)); +#265979 = DIRECTION('',(-0.,0.,-1.)); +#265980 = DIRECTION('',(-0.,-1.,0.)); +#265981 = FACE_BOUND('',#265982,.T.); +#265982 = EDGE_LOOP('',(#265983)); +#265983 = ORIENTED_EDGE('',*,*,#265984,.T.); +#265984 = EDGE_CURVE('',#265985,#265985,#265987,.T.); +#265985 = VERTEX_POINT('',#265986); +#265986 = CARTESIAN_POINT('',(182.69165,-134.4731,1.51)); +#265987 = CIRCLE('',#265988,0.65); +#265988 = AXIS2_PLACEMENT_3D('',#265989,#265990,#265991); +#265989 = CARTESIAN_POINT('',(182.69165,-133.8231,1.51)); +#265990 = DIRECTION('',(-0.,0.,-1.)); +#265991 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#265992 = FACE_BOUND('',#265993,.T.); +#265993 = EDGE_LOOP('',(#265994)); +#265994 = ORIENTED_EDGE('',*,*,#265995,.T.); +#265995 = EDGE_CURVE('',#265996,#265996,#265998,.T.); +#265996 = VERTEX_POINT('',#265997); +#265997 = CARTESIAN_POINT('',(187.69165,-134.4731,1.51)); +#265998 = CIRCLE('',#265999,0.65); +#265999 = AXIS2_PLACEMENT_3D('',#266000,#266001,#266002); +#266000 = CARTESIAN_POINT('',(187.69165,-133.8231,1.51)); +#266001 = DIRECTION('',(-0.,0.,-1.)); +#266002 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#266003 = FACE_BOUND('',#266004,.T.); +#266004 = EDGE_LOOP('',(#266005)); +#266005 = ORIENTED_EDGE('',*,*,#266006,.T.); +#266006 = EDGE_CURVE('',#266007,#266007,#266009,.T.); +#266007 = VERTEX_POINT('',#266008); +#266008 = CARTESIAN_POINT('',(192.69165,-134.4731,1.51)); +#266009 = CIRCLE('',#266010,0.65); +#266010 = AXIS2_PLACEMENT_3D('',#266011,#266012,#266013); +#266011 = CARTESIAN_POINT('',(192.69165,-133.8231,1.51)); +#266012 = DIRECTION('',(-0.,0.,-1.)); +#266013 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#266014 = FACE_BOUND('',#266015,.T.); +#266015 = EDGE_LOOP('',(#266016)); +#266016 = ORIENTED_EDGE('',*,*,#266017,.T.); +#266017 = EDGE_CURVE('',#266018,#266018,#266020,.T.); +#266018 = VERTEX_POINT('',#266019); +#266019 = CARTESIAN_POINT('',(199.19165,-138.3731,1.51)); +#266020 = CIRCLE('',#266021,0.55); +#266021 = AXIS2_PLACEMENT_3D('',#266022,#266023,#266024); +#266022 = CARTESIAN_POINT('',(199.19165,-137.8231,1.51)); +#266023 = DIRECTION('',(-0.,0.,-1.)); +#266024 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266025 = FACE_BOUND('',#266026,.T.); +#266026 = EDGE_LOOP('',(#266027)); +#266027 = ORIENTED_EDGE('',*,*,#266028,.T.); +#266028 = EDGE_CURVE('',#266029,#266029,#266031,.T.); +#266029 = VERTEX_POINT('',#266030); +#266030 = CARTESIAN_POINT('',(199.19165,-133.8731,1.51)); +#266031 = CIRCLE('',#266032,0.55); +#266032 = AXIS2_PLACEMENT_3D('',#266033,#266034,#266035); +#266033 = CARTESIAN_POINT('',(199.19165,-133.3231,1.51)); +#266034 = DIRECTION('',(-0.,0.,-1.)); +#266035 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266036 = FACE_BOUND('',#266037,.T.); +#266037 = EDGE_LOOP('',(#266038)); +#266038 = ORIENTED_EDGE('',*,*,#266039,.T.); +#266039 = EDGE_CURVE('',#266040,#266040,#266042,.T.); +#266040 = VERTEX_POINT('',#266041); +#266041 = CARTESIAN_POINT('',(205.69165,-138.3731,1.51)); +#266042 = CIRCLE('',#266043,0.55); +#266043 = AXIS2_PLACEMENT_3D('',#266044,#266045,#266046); +#266044 = CARTESIAN_POINT('',(205.69165,-137.8231,1.51)); +#266045 = DIRECTION('',(-0.,0.,-1.)); +#266046 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266047 = FACE_BOUND('',#266048,.T.); +#266048 = EDGE_LOOP('',(#266049)); +#266049 = ORIENTED_EDGE('',*,*,#266050,.T.); +#266050 = EDGE_CURVE('',#266051,#266051,#266053,.T.); +#266051 = VERTEX_POINT('',#266052); +#266052 = CARTESIAN_POINT('',(205.69165,-133.8731,1.51)); +#266053 = CIRCLE('',#266054,0.55); +#266054 = AXIS2_PLACEMENT_3D('',#266055,#266056,#266057); +#266055 = CARTESIAN_POINT('',(205.69165,-133.3231,1.51)); +#266056 = DIRECTION('',(-0.,0.,-1.)); +#266057 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#266058 = FACE_BOUND('',#266059,.T.); +#266059 = EDGE_LOOP('',(#266060)); +#266060 = ORIENTED_EDGE('',*,*,#266061,.T.); +#266061 = EDGE_CURVE('',#266062,#266062,#266064,.T.); +#266062 = VERTEX_POINT('',#266063); +#266063 = CARTESIAN_POINT('',(211.19165,-136.9231,1.51)); +#266064 = CIRCLE('',#266065,1.6); +#266065 = AXIS2_PLACEMENT_3D('',#266066,#266067,#266068); +#266066 = CARTESIAN_POINT('',(211.19165,-135.3231,1.51)); +#266067 = DIRECTION('',(-0.,0.,-1.)); +#266068 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#266069 = FACE_BOUND('',#266070,.T.); +#266070 = EDGE_LOOP('',(#266071)); +#266071 = ORIENTED_EDGE('',*,*,#266072,.T.); +#266072 = EDGE_CURVE('',#266073,#266073,#266075,.T.); +#266073 = VERTEX_POINT('',#266074); +#266074 = CARTESIAN_POINT('',(210.19165,-121.8231,1.51)); +#266075 = CIRCLE('',#266076,0.5); +#266076 = AXIS2_PLACEMENT_3D('',#266077,#266078,#266079); +#266077 = CARTESIAN_POINT('',(210.19165,-121.3231,1.51)); +#266078 = DIRECTION('',(-0.,0.,-1.)); +#266079 = DIRECTION('',(-0.,-1.,0.)); +#266080 = FACE_BOUND('',#266081,.T.); +#266081 = EDGE_LOOP('',(#266082)); +#266082 = ORIENTED_EDGE('',*,*,#266083,.T.); +#266083 = EDGE_CURVE('',#266084,#266084,#266086,.T.); +#266084 = VERTEX_POINT('',#266085); +#266085 = CARTESIAN_POINT('',(210.19165,-119.3231,1.51)); +#266086 = CIRCLE('',#266087,0.5); +#266087 = AXIS2_PLACEMENT_3D('',#266088,#266089,#266090); +#266088 = CARTESIAN_POINT('',(210.19165,-118.8231,1.51)); +#266089 = DIRECTION('',(-0.,0.,-1.)); +#266090 = DIRECTION('',(-0.,-1.,0.)); +#266091 = FACE_BOUND('',#266092,.T.); +#266092 = EDGE_LOOP('',(#266093)); +#266093 = ORIENTED_EDGE('',*,*,#266094,.T.); +#266094 = EDGE_CURVE('',#266095,#266095,#266097,.T.); +#266095 = VERTEX_POINT('',#266096); +#266096 = CARTESIAN_POINT('',(174.19165,-93.2231,1.51)); +#266097 = CIRCLE('',#266098,0.4); +#266098 = AXIS2_PLACEMENT_3D('',#266099,#266100,#266101); +#266099 = CARTESIAN_POINT('',(174.19165,-92.8231,1.51)); +#266100 = DIRECTION('',(-0.,0.,-1.)); +#266101 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266102 = FACE_BOUND('',#266103,.T.); +#266103 = EDGE_LOOP('',(#266104)); +#266104 = ORIENTED_EDGE('',*,*,#266105,.T.); +#266105 = EDGE_CURVE('',#266106,#266106,#266108,.T.); +#266106 = VERTEX_POINT('',#266107); +#266107 = CARTESIAN_POINT('',(210.19165,-108.7981,1.51)); +#266108 = CIRCLE('',#266109,0.475); +#266109 = AXIS2_PLACEMENT_3D('',#266110,#266111,#266112); +#266110 = CARTESIAN_POINT('',(210.19165,-108.3231,1.51)); +#266111 = DIRECTION('',(-0.,0.,-1.)); +#266112 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266113 = FACE_BOUND('',#266114,.T.); +#266114 = EDGE_LOOP('',(#266115)); +#266115 = ORIENTED_EDGE('',*,*,#266116,.T.); +#266116 = EDGE_CURVE('',#266117,#266117,#266119,.T.); +#266117 = VERTEX_POINT('',#266118); +#266118 = CARTESIAN_POINT('',(210.19165,-106.2981,1.51)); +#266119 = CIRCLE('',#266120,0.475); +#266120 = AXIS2_PLACEMENT_3D('',#266121,#266122,#266123); +#266121 = CARTESIAN_POINT('',(210.19165,-105.8231,1.51)); +#266122 = DIRECTION('',(-0.,0.,-1.)); +#266123 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266124 = FACE_BOUND('',#266125,.T.); +#266125 = EDGE_LOOP('',(#266126)); +#266126 = ORIENTED_EDGE('',*,*,#266127,.T.); +#266127 = EDGE_CURVE('',#266128,#266128,#266130,.T.); +#266128 = VERTEX_POINT('',#266129); +#266129 = CARTESIAN_POINT('',(210.19165,-103.7981,1.51)); +#266130 = CIRCLE('',#266131,0.475); +#266131 = AXIS2_PLACEMENT_3D('',#266132,#266133,#266134); +#266132 = CARTESIAN_POINT('',(210.19165,-103.3231,1.51)); +#266133 = DIRECTION('',(-0.,0.,-1.)); +#266134 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266135 = FACE_BOUND('',#266136,.T.); +#266136 = EDGE_LOOP('',(#266137)); +#266137 = ORIENTED_EDGE('',*,*,#266138,.T.); +#266138 = EDGE_CURVE('',#266139,#266139,#266141,.T.); +#266139 = VERTEX_POINT('',#266140); +#266140 = CARTESIAN_POINT('',(196.54165,-93.2231,1.51)); +#266141 = CIRCLE('',#266142,0.4); +#266142 = AXIS2_PLACEMENT_3D('',#266143,#266144,#266145); +#266143 = CARTESIAN_POINT('',(196.54165,-92.8231,1.51)); +#266144 = DIRECTION('',(-0.,0.,-1.)); +#266145 = DIRECTION('',(-0.,-1.,0.)); +#266146 = FACE_BOUND('',#266147,.T.); +#266147 = EDGE_LOOP('',(#266148)); +#266148 = ORIENTED_EDGE('',*,*,#266149,.T.); +#266149 = EDGE_CURVE('',#266150,#266150,#266152,.T.); +#266150 = VERTEX_POINT('',#266151); +#266151 = CARTESIAN_POINT('',(210.19165,-95.7981,1.51)); +#266152 = CIRCLE('',#266153,0.475); +#266153 = AXIS2_PLACEMENT_3D('',#266154,#266155,#266156); +#266154 = CARTESIAN_POINT('',(210.19165,-95.3231,1.51)); +#266155 = DIRECTION('',(-0.,0.,-1.)); +#266156 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266157 = FACE_BOUND('',#266158,.T.); +#266158 = EDGE_LOOP('',(#266159)); +#266159 = ORIENTED_EDGE('',*,*,#266160,.T.); +#266160 = EDGE_CURVE('',#266161,#266161,#266163,.T.); +#266161 = VERTEX_POINT('',#266162); +#266162 = CARTESIAN_POINT('',(210.19165,-93.2981,1.51)); +#266163 = CIRCLE('',#266164,0.475); +#266164 = AXIS2_PLACEMENT_3D('',#266165,#266166,#266167); +#266165 = CARTESIAN_POINT('',(210.19165,-92.8231,1.51)); +#266166 = DIRECTION('',(-0.,0.,-1.)); +#266167 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#266168 = FACE_BOUND('',#266169,.T.); +#266169 = EDGE_LOOP('',(#266170)); +#266170 = ORIENTED_EDGE('',*,*,#266171,.T.); +#266171 = EDGE_CURVE('',#266172,#266172,#266174,.T.); +#266172 = VERTEX_POINT('',#266173); +#266173 = CARTESIAN_POINT('',(106.11165,-81.8231,1.51)); +#266174 = CIRCLE('',#266175,0.5); +#266175 = AXIS2_PLACEMENT_3D('',#266176,#266177,#266178); +#266176 = CARTESIAN_POINT('',(106.11165,-81.3231,1.51)); +#266177 = DIRECTION('',(-0.,0.,-1.)); +#266178 = DIRECTION('',(-0.,-1.,0.)); +#266179 = FACE_BOUND('',#266180,.T.); +#266180 = EDGE_LOOP('',(#266181)); +#266181 = ORIENTED_EDGE('',*,*,#266182,.T.); +#266182 = EDGE_CURVE('',#266183,#266183,#266185,.T.); +#266183 = VERTEX_POINT('',#266184); +#266184 = CARTESIAN_POINT('',(108.65165,-81.8231,1.51)); +#266185 = CIRCLE('',#266186,0.5); +#266186 = AXIS2_PLACEMENT_3D('',#266187,#266188,#266189); +#266187 = CARTESIAN_POINT('',(108.65165,-81.3231,1.51)); +#266188 = DIRECTION('',(-0.,0.,-1.)); +#266189 = DIRECTION('',(-0.,-1.,0.)); +#266190 = FACE_BOUND('',#266191,.T.); +#266191 = EDGE_LOOP('',(#266192)); +#266192 = ORIENTED_EDGE('',*,*,#266193,.T.); +#266193 = EDGE_CURVE('',#266194,#266194,#266196,.T.); +#266194 = VERTEX_POINT('',#266195); +#266195 = CARTESIAN_POINT('',(111.19165,-81.8231,1.51)); +#266196 = CIRCLE('',#266197,0.5); +#266197 = AXIS2_PLACEMENT_3D('',#266198,#266199,#266200); +#266198 = CARTESIAN_POINT('',(111.19165,-81.3231,1.51)); +#266199 = DIRECTION('',(-0.,0.,-1.)); +#266200 = DIRECTION('',(-0.,-1.,0.)); +#266201 = FACE_BOUND('',#266202,.T.); +#266202 = EDGE_LOOP('',(#266203)); +#266203 = ORIENTED_EDGE('',*,*,#266204,.T.); +#266204 = EDGE_CURVE('',#266205,#266205,#266207,.T.); +#266205 = VERTEX_POINT('',#266206); +#266206 = CARTESIAN_POINT('',(113.73165,-81.8231,1.51)); +#266207 = CIRCLE('',#266208,0.5); +#266208 = AXIS2_PLACEMENT_3D('',#266209,#266210,#266211); +#266209 = CARTESIAN_POINT('',(113.73165,-81.3231,1.51)); +#266210 = DIRECTION('',(-0.,0.,-1.)); +#266211 = DIRECTION('',(-0.,-1.,0.)); +#266212 = FACE_BOUND('',#266213,.T.); +#266213 = EDGE_LOOP('',(#266214)); +#266214 = ORIENTED_EDGE('',*,*,#266215,.T.); +#266215 = EDGE_CURVE('',#266216,#266216,#266218,.T.); +#266216 = VERTEX_POINT('',#266217); +#266217 = CARTESIAN_POINT('',(107.19165,-74.6031,1.51)); +#266218 = CIRCLE('',#266219,0.5); +#266219 = AXIS2_PLACEMENT_3D('',#266220,#266221,#266222); +#266220 = CARTESIAN_POINT('',(107.19165,-74.1031,1.51)); +#266221 = DIRECTION('',(-0.,0.,-1.)); +#266222 = DIRECTION('',(-0.,-1.,0.)); +#266223 = FACE_BOUND('',#266224,.T.); +#266224 = EDGE_LOOP('',(#266225)); +#266225 = ORIENTED_EDGE('',*,*,#266226,.T.); +#266226 = EDGE_CURVE('',#266227,#266227,#266229,.T.); +#266227 = VERTEX_POINT('',#266228); +#266228 = CARTESIAN_POINT('',(109.73165,-74.6031,1.51)); +#266229 = CIRCLE('',#266230,0.5); +#266230 = AXIS2_PLACEMENT_3D('',#266231,#266232,#266233); +#266231 = CARTESIAN_POINT('',(109.73165,-74.1031,1.51)); +#266232 = DIRECTION('',(-0.,0.,-1.)); +#266233 = DIRECTION('',(-0.,-1.,0.)); +#266234 = FACE_BOUND('',#266235,.T.); +#266235 = EDGE_LOOP('',(#266236)); +#266236 = ORIENTED_EDGE('',*,*,#266237,.T.); +#266237 = EDGE_CURVE('',#266238,#266238,#266240,.T.); +#266238 = VERTEX_POINT('',#266239); +#266239 = CARTESIAN_POINT('',(112.27165,-74.6031,1.51)); +#266240 = CIRCLE('',#266241,0.5); +#266241 = AXIS2_PLACEMENT_3D('',#266242,#266243,#266244); +#266242 = CARTESIAN_POINT('',(112.27165,-74.1031,1.51)); +#266243 = DIRECTION('',(-0.,0.,-1.)); +#266244 = DIRECTION('',(-0.,-1.,0.)); +#266245 = FACE_BOUND('',#266246,.T.); +#266246 = EDGE_LOOP('',(#266247)); +#266247 = ORIENTED_EDGE('',*,*,#266248,.T.); +#266248 = EDGE_CURVE('',#266249,#266249,#266251,.T.); +#266249 = VERTEX_POINT('',#266250); +#266250 = CARTESIAN_POINT('',(114.81165,-74.6031,1.51)); +#266251 = CIRCLE('',#266252,0.5); +#266252 = AXIS2_PLACEMENT_3D('',#266253,#266254,#266255); +#266253 = CARTESIAN_POINT('',(114.81165,-74.1031,1.51)); +#266254 = DIRECTION('',(-0.,0.,-1.)); +#266255 = DIRECTION('',(-0.,-1.,0.)); +#266256 = FACE_BOUND('',#266257,.T.); +#266257 = EDGE_LOOP('',(#266258)); +#266258 = ORIENTED_EDGE('',*,*,#266259,.T.); +#266259 = EDGE_CURVE('',#266260,#266260,#266262,.T.); +#266260 = VERTEX_POINT('',#266261); +#266261 = CARTESIAN_POINT('',(116.27165,-81.8231,1.51)); +#266262 = CIRCLE('',#266263,0.5); +#266263 = AXIS2_PLACEMENT_3D('',#266264,#266265,#266266); +#266264 = CARTESIAN_POINT('',(116.27165,-81.3231,1.51)); +#266265 = DIRECTION('',(-0.,0.,-1.)); +#266266 = DIRECTION('',(-0.,-1.,0.)); +#266267 = FACE_BOUND('',#266268,.T.); +#266268 = EDGE_LOOP('',(#266269)); +#266269 = ORIENTED_EDGE('',*,*,#266270,.T.); +#266270 = EDGE_CURVE('',#266271,#266271,#266273,.T.); +#266271 = VERTEX_POINT('',#266272); +#266272 = CARTESIAN_POINT('',(118.81165,-81.8231,1.51)); +#266273 = CIRCLE('',#266274,0.5); +#266274 = AXIS2_PLACEMENT_3D('',#266275,#266276,#266277); +#266275 = CARTESIAN_POINT('',(118.81165,-81.3231,1.51)); +#266276 = DIRECTION('',(-0.,0.,-1.)); +#266277 = DIRECTION('',(-0.,-1.,0.)); +#266278 = FACE_BOUND('',#266279,.T.); +#266279 = EDGE_LOOP('',(#266280)); +#266280 = ORIENTED_EDGE('',*,*,#266281,.T.); +#266281 = EDGE_CURVE('',#266282,#266282,#266284,.T.); +#266282 = VERTEX_POINT('',#266283); +#266283 = CARTESIAN_POINT('',(121.35165,-81.8231,1.51)); +#266284 = CIRCLE('',#266285,0.5); +#266285 = AXIS2_PLACEMENT_3D('',#266286,#266287,#266288); +#266286 = CARTESIAN_POINT('',(121.35165,-81.3231,1.51)); +#266287 = DIRECTION('',(-0.,0.,-1.)); +#266288 = DIRECTION('',(-0.,-1.,0.)); +#266289 = FACE_BOUND('',#266290,.T.); +#266290 = EDGE_LOOP('',(#266291)); +#266291 = ORIENTED_EDGE('',*,*,#266292,.T.); +#266292 = EDGE_CURVE('',#266293,#266293,#266295,.T.); +#266293 = VERTEX_POINT('',#266294); +#266294 = CARTESIAN_POINT('',(123.89165,-81.8231,1.51)); +#266295 = CIRCLE('',#266296,0.5); +#266296 = AXIS2_PLACEMENT_3D('',#266297,#266298,#266299); +#266297 = CARTESIAN_POINT('',(123.89165,-81.3231,1.51)); +#266298 = DIRECTION('',(-0.,0.,-1.)); +#266299 = DIRECTION('',(-0.,-1.,0.)); +#266300 = FACE_BOUND('',#266301,.T.); +#266301 = EDGE_LOOP('',(#266302)); +#266302 = ORIENTED_EDGE('',*,*,#266303,.T.); +#266303 = EDGE_CURVE('',#266304,#266304,#266306,.T.); +#266304 = VERTEX_POINT('',#266305); +#266305 = CARTESIAN_POINT('',(126.43165,-81.8231,1.51)); +#266306 = CIRCLE('',#266307,0.5); +#266307 = AXIS2_PLACEMENT_3D('',#266308,#266309,#266310); +#266308 = CARTESIAN_POINT('',(126.43165,-81.3231,1.51)); +#266309 = DIRECTION('',(-0.,0.,-1.)); +#266310 = DIRECTION('',(-0.,-1.,0.)); +#266311 = FACE_BOUND('',#266312,.T.); +#266312 = EDGE_LOOP('',(#266313)); +#266313 = ORIENTED_EDGE('',*,*,#266314,.T.); +#266314 = EDGE_CURVE('',#266315,#266315,#266317,.T.); +#266315 = VERTEX_POINT('',#266316); +#266316 = CARTESIAN_POINT('',(128.97165,-81.8231,1.51)); +#266317 = CIRCLE('',#266318,0.5); +#266318 = AXIS2_PLACEMENT_3D('',#266319,#266320,#266321); +#266319 = CARTESIAN_POINT('',(128.97165,-81.3231,1.51)); +#266320 = DIRECTION('',(-0.,0.,-1.)); +#266321 = DIRECTION('',(-0.,-1.,0.)); +#266322 = FACE_BOUND('',#266323,.T.); +#266323 = EDGE_LOOP('',(#266324)); +#266324 = ORIENTED_EDGE('',*,*,#266325,.T.); +#266325 = EDGE_CURVE('',#266326,#266326,#266328,.T.); +#266326 = VERTEX_POINT('',#266327); +#266327 = CARTESIAN_POINT('',(133.03165,-81.8231,1.51)); +#266328 = CIRCLE('',#266329,0.5); +#266329 = AXIS2_PLACEMENT_3D('',#266330,#266331,#266332); +#266330 = CARTESIAN_POINT('',(133.03165,-81.3231,1.51)); +#266331 = DIRECTION('',(-0.,0.,-1.)); +#266332 = DIRECTION('',(-0.,-1.,0.)); +#266333 = FACE_BOUND('',#266334,.T.); +#266334 = EDGE_LOOP('',(#266335)); +#266335 = ORIENTED_EDGE('',*,*,#266336,.T.); +#266336 = EDGE_CURVE('',#266337,#266337,#266339,.T.); +#266337 = VERTEX_POINT('',#266338); +#266338 = CARTESIAN_POINT('',(135.57165,-81.8231,1.51)); +#266339 = CIRCLE('',#266340,0.5); +#266340 = AXIS2_PLACEMENT_3D('',#266341,#266342,#266343); +#266341 = CARTESIAN_POINT('',(135.57165,-81.3231,1.51)); +#266342 = DIRECTION('',(-0.,0.,-1.)); +#266343 = DIRECTION('',(-0.,-1.,0.)); +#266344 = FACE_BOUND('',#266345,.T.); +#266345 = EDGE_LOOP('',(#266346)); +#266346 = ORIENTED_EDGE('',*,*,#266347,.T.); +#266347 = EDGE_CURVE('',#266348,#266348,#266350,.T.); +#266348 = VERTEX_POINT('',#266349); +#266349 = CARTESIAN_POINT('',(138.11165,-81.8231,1.51)); +#266350 = CIRCLE('',#266351,0.5); +#266351 = AXIS2_PLACEMENT_3D('',#266352,#266353,#266354); +#266352 = CARTESIAN_POINT('',(138.11165,-81.3231,1.51)); +#266353 = DIRECTION('',(-0.,0.,-1.)); +#266354 = DIRECTION('',(-0.,-1.,0.)); +#266355 = FACE_BOUND('',#266356,.T.); +#266356 = EDGE_LOOP('',(#266357)); +#266357 = ORIENTED_EDGE('',*,*,#266358,.T.); +#266358 = EDGE_CURVE('',#266359,#266359,#266361,.T.); +#266359 = VERTEX_POINT('',#266360); +#266360 = CARTESIAN_POINT('',(140.65165,-81.8231,1.51)); +#266361 = CIRCLE('',#266362,0.5); +#266362 = AXIS2_PLACEMENT_3D('',#266363,#266364,#266365); +#266363 = CARTESIAN_POINT('',(140.65165,-81.3231,1.51)); +#266364 = DIRECTION('',(-0.,0.,-1.)); +#266365 = DIRECTION('',(-0.,-1.,0.)); +#266366 = FACE_BOUND('',#266367,.T.); +#266367 = EDGE_LOOP('',(#266368)); +#266368 = ORIENTED_EDGE('',*,*,#266369,.T.); +#266369 = EDGE_CURVE('',#266370,#266370,#266372,.T.); +#266370 = VERTEX_POINT('',#266371); +#266371 = CARTESIAN_POINT('',(143.19165,-81.8231,1.51)); +#266372 = CIRCLE('',#266373,0.5); +#266373 = AXIS2_PLACEMENT_3D('',#266374,#266375,#266376); +#266374 = CARTESIAN_POINT('',(143.19165,-81.3231,1.51)); +#266375 = DIRECTION('',(-0.,0.,-1.)); +#266376 = DIRECTION('',(-0.,-1.,0.)); +#266377 = FACE_BOUND('',#266378,.T.); +#266378 = EDGE_LOOP('',(#266379)); +#266379 = ORIENTED_EDGE('',*,*,#266380,.T.); +#266380 = EDGE_CURVE('',#266381,#266381,#266383,.T.); +#266381 = VERTEX_POINT('',#266382); +#266382 = CARTESIAN_POINT('',(145.73165,-81.8231,1.51)); +#266383 = CIRCLE('',#266384,0.5); +#266384 = AXIS2_PLACEMENT_3D('',#266385,#266386,#266387); +#266385 = CARTESIAN_POINT('',(145.73165,-81.3231,1.51)); +#266386 = DIRECTION('',(-0.,0.,-1.)); +#266387 = DIRECTION('',(-0.,-1.,0.)); +#266388 = FACE_BOUND('',#266389,.T.); +#266389 = EDGE_LOOP('',(#266390)); +#266390 = ORIENTED_EDGE('',*,*,#266391,.T.); +#266391 = EDGE_CURVE('',#266392,#266392,#266394,.T.); +#266392 = VERTEX_POINT('',#266393); +#266393 = CARTESIAN_POINT('',(117.35165,-74.6031,1.51)); +#266394 = CIRCLE('',#266395,0.5); +#266395 = AXIS2_PLACEMENT_3D('',#266396,#266397,#266398); +#266396 = CARTESIAN_POINT('',(117.35165,-74.1031,1.51)); +#266397 = DIRECTION('',(-0.,0.,-1.)); +#266398 = DIRECTION('',(-0.,-1.,0.)); +#266399 = FACE_BOUND('',#266400,.T.); +#266400 = EDGE_LOOP('',(#266401)); +#266401 = ORIENTED_EDGE('',*,*,#266402,.T.); +#266402 = EDGE_CURVE('',#266403,#266403,#266405,.T.); +#266403 = VERTEX_POINT('',#266404); +#266404 = CARTESIAN_POINT('',(119.89165,-74.6031,1.51)); +#266405 = CIRCLE('',#266406,0.5); +#266406 = AXIS2_PLACEMENT_3D('',#266407,#266408,#266409); +#266407 = CARTESIAN_POINT('',(119.89165,-74.1031,1.51)); +#266408 = DIRECTION('',(-0.,0.,-1.)); +#266409 = DIRECTION('',(-0.,-1.,0.)); +#266410 = FACE_BOUND('',#266411,.T.); +#266411 = EDGE_LOOP('',(#266412)); +#266412 = ORIENTED_EDGE('',*,*,#266413,.T.); +#266413 = EDGE_CURVE('',#266414,#266414,#266416,.T.); +#266414 = VERTEX_POINT('',#266415); +#266415 = CARTESIAN_POINT('',(122.43165,-74.6031,1.51)); +#266416 = CIRCLE('',#266417,0.5); +#266417 = AXIS2_PLACEMENT_3D('',#266418,#266419,#266420); +#266418 = CARTESIAN_POINT('',(122.43165,-74.1031,1.51)); +#266419 = DIRECTION('',(-0.,0.,-1.)); +#266420 = DIRECTION('',(-0.,-1.,0.)); +#266421 = FACE_BOUND('',#266422,.T.); +#266422 = EDGE_LOOP('',(#266423)); +#266423 = ORIENTED_EDGE('',*,*,#266424,.T.); +#266424 = EDGE_CURVE('',#266425,#266425,#266427,.T.); +#266425 = VERTEX_POINT('',#266426); +#266426 = CARTESIAN_POINT('',(124.97165,-74.6031,1.51)); +#266427 = CIRCLE('',#266428,0.5); +#266428 = AXIS2_PLACEMENT_3D('',#266429,#266430,#266431); +#266429 = CARTESIAN_POINT('',(124.97165,-74.1031,1.51)); +#266430 = DIRECTION('',(-0.,0.,-1.)); +#266431 = DIRECTION('',(-0.,-1.,0.)); +#266432 = FACE_BOUND('',#266433,.T.); +#266433 = EDGE_LOOP('',(#266434)); +#266434 = ORIENTED_EDGE('',*,*,#266435,.T.); +#266435 = EDGE_CURVE('',#266436,#266436,#266438,.T.); +#266436 = VERTEX_POINT('',#266437); +#266437 = CARTESIAN_POINT('',(127.51165,-74.6031,1.51)); +#266438 = CIRCLE('',#266439,0.5); +#266439 = AXIS2_PLACEMENT_3D('',#266440,#266441,#266442); +#266440 = CARTESIAN_POINT('',(127.51165,-74.1031,1.51)); +#266441 = DIRECTION('',(-0.,0.,-1.)); +#266442 = DIRECTION('',(-0.,-1.,0.)); +#266443 = FACE_BOUND('',#266444,.T.); +#266444 = EDGE_LOOP('',(#266445)); +#266445 = ORIENTED_EDGE('',*,*,#266446,.T.); +#266446 = EDGE_CURVE('',#266447,#266447,#266449,.T.); +#266447 = VERTEX_POINT('',#266448); +#266448 = CARTESIAN_POINT('',(130.05165,-74.6031,1.51)); +#266449 = CIRCLE('',#266450,0.5); +#266450 = AXIS2_PLACEMENT_3D('',#266451,#266452,#266453); +#266451 = CARTESIAN_POINT('',(130.05165,-74.1031,1.51)); +#266452 = DIRECTION('',(-0.,0.,-1.)); +#266453 = DIRECTION('',(-0.,-1.,0.)); +#266454 = FACE_BOUND('',#266455,.T.); +#266455 = EDGE_LOOP('',(#266456)); +#266456 = ORIENTED_EDGE('',*,*,#266457,.T.); +#266457 = EDGE_CURVE('',#266458,#266458,#266460,.T.); +#266458 = VERTEX_POINT('',#266459); +#266459 = CARTESIAN_POINT('',(132.59165,-74.6031,1.51)); +#266460 = CIRCLE('',#266461,0.5); +#266461 = AXIS2_PLACEMENT_3D('',#266462,#266463,#266464); +#266462 = CARTESIAN_POINT('',(132.59165,-74.1031,1.51)); +#266463 = DIRECTION('',(-0.,0.,-1.)); +#266464 = DIRECTION('',(-0.,-1.,0.)); +#266465 = FACE_BOUND('',#266466,.T.); +#266466 = EDGE_LOOP('',(#266467)); +#266467 = ORIENTED_EDGE('',*,*,#266468,.T.); +#266468 = EDGE_CURVE('',#266469,#266469,#266471,.T.); +#266469 = VERTEX_POINT('',#266470); +#266470 = CARTESIAN_POINT('',(135.13165,-74.6031,1.51)); +#266471 = CIRCLE('',#266472,0.5); +#266472 = AXIS2_PLACEMENT_3D('',#266473,#266474,#266475); +#266473 = CARTESIAN_POINT('',(135.13165,-74.1031,1.51)); +#266474 = DIRECTION('',(-0.,0.,-1.)); +#266475 = DIRECTION('',(-0.,-1.,0.)); +#266476 = FACE_BOUND('',#266477,.T.); +#266477 = EDGE_LOOP('',(#266478)); +#266478 = ORIENTED_EDGE('',*,*,#266479,.T.); +#266479 = EDGE_CURVE('',#266480,#266480,#266482,.T.); +#266480 = VERTEX_POINT('',#266481); +#266481 = CARTESIAN_POINT('',(137.67165,-74.6031,1.51)); +#266482 = CIRCLE('',#266483,0.5); +#266483 = AXIS2_PLACEMENT_3D('',#266484,#266485,#266486); +#266484 = CARTESIAN_POINT('',(137.67165,-74.1031,1.51)); +#266485 = DIRECTION('',(-0.,0.,-1.)); +#266486 = DIRECTION('',(-0.,-1.,0.)); +#266487 = FACE_BOUND('',#266488,.T.); +#266488 = EDGE_LOOP('',(#266489)); +#266489 = ORIENTED_EDGE('',*,*,#266490,.T.); +#266490 = EDGE_CURVE('',#266491,#266491,#266493,.T.); +#266491 = VERTEX_POINT('',#266492); +#266492 = CARTESIAN_POINT('',(140.21165,-74.6031,1.51)); +#266493 = CIRCLE('',#266494,0.5); +#266494 = AXIS2_PLACEMENT_3D('',#266495,#266496,#266497); +#266495 = CARTESIAN_POINT('',(140.21165,-74.1031,1.51)); +#266496 = DIRECTION('',(-0.,0.,-1.)); +#266497 = DIRECTION('',(-0.,-1.,0.)); +#266498 = FACE_BOUND('',#266499,.T.); +#266499 = EDGE_LOOP('',(#266500)); +#266500 = ORIENTED_EDGE('',*,*,#266501,.T.); +#266501 = EDGE_CURVE('',#266502,#266502,#266504,.T.); +#266502 = VERTEX_POINT('',#266503); +#266503 = CARTESIAN_POINT('',(142.75165,-74.6031,1.51)); +#266504 = CIRCLE('',#266505,0.5); +#266505 = AXIS2_PLACEMENT_3D('',#266506,#266507,#266508); +#266506 = CARTESIAN_POINT('',(142.75165,-74.1031,1.51)); +#266507 = DIRECTION('',(-0.,0.,-1.)); +#266508 = DIRECTION('',(-0.,-1.,0.)); +#266509 = FACE_BOUND('',#266510,.T.); +#266510 = EDGE_LOOP('',(#266511)); +#266511 = ORIENTED_EDGE('',*,*,#266512,.T.); +#266512 = EDGE_CURVE('',#266513,#266513,#266515,.T.); +#266513 = VERTEX_POINT('',#266514); +#266514 = CARTESIAN_POINT('',(145.29165,-74.6031,1.51)); +#266515 = CIRCLE('',#266516,0.5); +#266516 = AXIS2_PLACEMENT_3D('',#266517,#266518,#266519); +#266517 = CARTESIAN_POINT('',(145.29165,-74.1031,1.51)); +#266518 = DIRECTION('',(-0.,0.,-1.)); +#266519 = DIRECTION('',(-0.,-1.,0.)); +#266520 = FACE_BOUND('',#266521,.T.); +#266521 = EDGE_LOOP('',(#266522)); +#266522 = ORIENTED_EDGE('',*,*,#266523,.T.); +#266523 = EDGE_CURVE('',#266524,#266524,#266526,.T.); +#266524 = VERTEX_POINT('',#266525); +#266525 = CARTESIAN_POINT('',(147.83165,-74.6031,1.51)); +#266526 = CIRCLE('',#266527,0.5); +#266527 = AXIS2_PLACEMENT_3D('',#266528,#266529,#266530); +#266528 = CARTESIAN_POINT('',(147.83165,-74.1031,1.51)); +#266529 = DIRECTION('',(-0.,0.,-1.)); +#266530 = DIRECTION('',(-0.,-1.,0.)); +#266531 = FACE_BOUND('',#266532,.T.); +#266532 = EDGE_LOOP('',(#266533)); +#266533 = ORIENTED_EDGE('',*,*,#266534,.T.); +#266534 = EDGE_CURVE('',#266535,#266535,#266537,.T.); +#266535 = VERTEX_POINT('',#266536); +#266536 = CARTESIAN_POINT('',(107.19165,-56.8231,1.51)); +#266537 = CIRCLE('',#266538,0.5); +#266538 = AXIS2_PLACEMENT_3D('',#266539,#266540,#266541); +#266539 = CARTESIAN_POINT('',(107.19165,-56.3231,1.51)); +#266540 = DIRECTION('',(-0.,0.,-1.)); +#266541 = DIRECTION('',(-0.,-1.,0.)); +#266542 = FACE_BOUND('',#266543,.T.); +#266543 = EDGE_LOOP('',(#266544)); +#266544 = ORIENTED_EDGE('',*,*,#266545,.T.); +#266545 = EDGE_CURVE('',#266546,#266546,#266548,.T.); +#266546 = VERTEX_POINT('',#266547); +#266547 = CARTESIAN_POINT('',(109.73165,-56.8231,1.51)); +#266548 = CIRCLE('',#266549,0.5); +#266549 = AXIS2_PLACEMENT_3D('',#266550,#266551,#266552); +#266550 = CARTESIAN_POINT('',(109.73165,-56.3231,1.51)); +#266551 = DIRECTION('',(-0.,0.,-1.)); +#266552 = DIRECTION('',(-0.,-1.,0.)); +#266553 = FACE_BOUND('',#266554,.T.); +#266554 = EDGE_LOOP('',(#266555)); +#266555 = ORIENTED_EDGE('',*,*,#266556,.T.); +#266556 = EDGE_CURVE('',#266557,#266557,#266559,.T.); +#266557 = VERTEX_POINT('',#266558); +#266558 = CARTESIAN_POINT('',(112.27165,-56.8231,1.51)); +#266559 = CIRCLE('',#266560,0.5); +#266560 = AXIS2_PLACEMENT_3D('',#266561,#266562,#266563); +#266561 = CARTESIAN_POINT('',(112.27165,-56.3231,1.51)); +#266562 = DIRECTION('',(-0.,0.,-1.)); +#266563 = DIRECTION('',(-0.,-1.,0.)); +#266564 = FACE_BOUND('',#266565,.T.); +#266565 = EDGE_LOOP('',(#266566)); +#266566 = ORIENTED_EDGE('',*,*,#266567,.T.); +#266567 = EDGE_CURVE('',#266568,#266568,#266570,.T.); +#266568 = VERTEX_POINT('',#266569); +#266569 = CARTESIAN_POINT('',(114.81165,-56.8231,1.51)); +#266570 = CIRCLE('',#266571,0.5); +#266571 = AXIS2_PLACEMENT_3D('',#266572,#266573,#266574); +#266572 = CARTESIAN_POINT('',(114.81165,-56.3231,1.51)); +#266573 = DIRECTION('',(-0.,0.,-1.)); +#266574 = DIRECTION('',(-0.,-1.,0.)); +#266575 = FACE_BOUND('',#266576,.T.); +#266576 = EDGE_LOOP('',(#266577)); +#266577 = ORIENTED_EDGE('',*,*,#266578,.T.); +#266578 = EDGE_CURVE('',#266579,#266579,#266581,.T.); +#266579 = VERTEX_POINT('',#266580); +#266580 = CARTESIAN_POINT('',(85.19165,-46.9231,1.51)); +#266581 = CIRCLE('',#266582,1.6); +#266582 = AXIS2_PLACEMENT_3D('',#266583,#266584,#266585); +#266583 = CARTESIAN_POINT('',(85.19165,-45.3231,1.51)); +#266584 = DIRECTION('',(-0.,0.,-1.)); +#266585 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#266586 = FACE_BOUND('',#266587,.T.); +#266587 = EDGE_LOOP('',(#266588)); +#266588 = ORIENTED_EDGE('',*,*,#266589,.T.); +#266589 = EDGE_CURVE('',#266590,#266590,#266592,.T.); +#266590 = VERTEX_POINT('',#266591); +#266591 = CARTESIAN_POINT('',(98.19165,-46.7981,1.51)); +#266592 = CIRCLE('',#266593,0.475); +#266593 = AXIS2_PLACEMENT_3D('',#266594,#266595,#266596); +#266594 = CARTESIAN_POINT('',(98.19165,-46.3231,1.51)); +#266595 = DIRECTION('',(-0.,0.,-1.)); +#266596 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266597 = FACE_BOUND('',#266598,.T.); +#266598 = EDGE_LOOP('',(#266599)); +#266599 = ORIENTED_EDGE('',*,*,#266600,.T.); +#266600 = EDGE_CURVE('',#266601,#266601,#266603,.T.); +#266601 = VERTEX_POINT('',#266602); +#266602 = CARTESIAN_POINT('',(111.19165,-51.9031,1.51)); +#266603 = CIRCLE('',#266604,0.5); +#266604 = AXIS2_PLACEMENT_3D('',#266605,#266606,#266607); +#266605 = CARTESIAN_POINT('',(111.19165,-51.4031,1.51)); +#266606 = DIRECTION('',(-0.,0.,-1.)); +#266607 = DIRECTION('',(-0.,-1.,0.)); +#266608 = FACE_BOUND('',#266609,.T.); +#266609 = EDGE_LOOP('',(#266610)); +#266610 = ORIENTED_EDGE('',*,*,#266611,.T.); +#266611 = EDGE_CURVE('',#266612,#266612,#266614,.T.); +#266612 = VERTEX_POINT('',#266613); +#266613 = CARTESIAN_POINT('',(100.69165,-46.7981,1.51)); +#266614 = CIRCLE('',#266615,0.475); +#266615 = AXIS2_PLACEMENT_3D('',#266616,#266617,#266618); +#266616 = CARTESIAN_POINT('',(100.69165,-46.3231,1.51)); +#266617 = DIRECTION('',(-0.,0.,-1.)); +#266618 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266619 = FACE_BOUND('',#266620,.T.); +#266620 = EDGE_LOOP('',(#266621)); +#266621 = ORIENTED_EDGE('',*,*,#266622,.T.); +#266622 = EDGE_CURVE('',#266623,#266623,#266625,.T.); +#266623 = VERTEX_POINT('',#266624); +#266624 = CARTESIAN_POINT('',(103.19165,-46.7981,1.51)); +#266625 = CIRCLE('',#266626,0.475); +#266626 = AXIS2_PLACEMENT_3D('',#266627,#266628,#266629); +#266627 = CARTESIAN_POINT('',(103.19165,-46.3231,1.51)); +#266628 = DIRECTION('',(-0.,0.,-1.)); +#266629 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266630 = FACE_BOUND('',#266631,.T.); +#266631 = EDGE_LOOP('',(#266632)); +#266632 = ORIENTED_EDGE('',*,*,#266633,.T.); +#266633 = EDGE_CURVE('',#266634,#266634,#266636,.T.); +#266634 = VERTEX_POINT('',#266635); +#266635 = CARTESIAN_POINT('',(105.69165,-46.7981,1.51)); +#266636 = CIRCLE('',#266637,0.475); +#266637 = AXIS2_PLACEMENT_3D('',#266638,#266639,#266640); +#266638 = CARTESIAN_POINT('',(105.69165,-46.3231,1.51)); +#266639 = DIRECTION('',(-0.,0.,-1.)); +#266640 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266641 = FACE_BOUND('',#266642,.T.); +#266642 = EDGE_LOOP('',(#266643)); +#266643 = ORIENTED_EDGE('',*,*,#266644,.T.); +#266644 = EDGE_CURVE('',#266645,#266645,#266647,.T.); +#266645 = VERTEX_POINT('',#266646); +#266646 = CARTESIAN_POINT('',(111.19165,-49.3631,1.51)); +#266647 = CIRCLE('',#266648,0.5); +#266648 = AXIS2_PLACEMENT_3D('',#266649,#266650,#266651); +#266649 = CARTESIAN_POINT('',(111.19165,-48.8631,1.51)); +#266650 = DIRECTION('',(-0.,0.,-1.)); +#266651 = DIRECTION('',(-0.,-1.,0.)); +#266652 = FACE_BOUND('',#266653,.T.); +#266653 = EDGE_LOOP('',(#266654)); +#266654 = ORIENTED_EDGE('',*,*,#266655,.T.); +#266655 = EDGE_CURVE('',#266656,#266656,#266658,.T.); +#266656 = VERTEX_POINT('',#266657); +#266657 = CARTESIAN_POINT('',(111.19165,-46.8231,1.51)); +#266658 = CIRCLE('',#266659,0.5); +#266659 = AXIS2_PLACEMENT_3D('',#266660,#266661,#266662); +#266660 = CARTESIAN_POINT('',(111.19165,-46.3231,1.51)); +#266661 = DIRECTION('',(-0.,0.,-1.)); +#266662 = DIRECTION('',(-0.,-1.,0.)); +#266663 = FACE_BOUND('',#266664,.T.); +#266664 = EDGE_LOOP('',(#266665)); +#266665 = ORIENTED_EDGE('',*,*,#266666,.T.); +#266666 = EDGE_CURVE('',#266667,#266667,#266669,.T.); +#266667 = VERTEX_POINT('',#266668); +#266668 = CARTESIAN_POINT('',(117.35165,-56.8231,1.51)); +#266669 = CIRCLE('',#266670,0.5); +#266670 = AXIS2_PLACEMENT_3D('',#266671,#266672,#266673); +#266671 = CARTESIAN_POINT('',(117.35165,-56.3231,1.51)); +#266672 = DIRECTION('',(-0.,0.,-1.)); +#266673 = DIRECTION('',(-0.,-1.,0.)); +#266674 = FACE_BOUND('',#266675,.T.); +#266675 = EDGE_LOOP('',(#266676)); +#266676 = ORIENTED_EDGE('',*,*,#266677,.T.); +#266677 = EDGE_CURVE('',#266678,#266678,#266680,.T.); +#266678 = VERTEX_POINT('',#266679); +#266679 = CARTESIAN_POINT('',(119.89165,-56.8231,1.51)); +#266680 = CIRCLE('',#266681,0.5); +#266681 = AXIS2_PLACEMENT_3D('',#266682,#266683,#266684); +#266682 = CARTESIAN_POINT('',(119.89165,-56.3231,1.51)); +#266683 = DIRECTION('',(-0.,0.,-1.)); +#266684 = DIRECTION('',(-0.,-1.,0.)); +#266685 = FACE_BOUND('',#266686,.T.); +#266686 = EDGE_LOOP('',(#266687)); +#266687 = ORIENTED_EDGE('',*,*,#266688,.T.); +#266688 = EDGE_CURVE('',#266689,#266689,#266691,.T.); +#266689 = VERTEX_POINT('',#266690); +#266690 = CARTESIAN_POINT('',(122.43165,-56.8231,1.51)); +#266691 = CIRCLE('',#266692,0.5); +#266692 = AXIS2_PLACEMENT_3D('',#266693,#266694,#266695); +#266693 = CARTESIAN_POINT('',(122.43165,-56.3231,1.51)); +#266694 = DIRECTION('',(-0.,0.,-1.)); +#266695 = DIRECTION('',(-0.,-1.,0.)); +#266696 = FACE_BOUND('',#266697,.T.); +#266697 = EDGE_LOOP('',(#266698)); +#266698 = ORIENTED_EDGE('',*,*,#266699,.T.); +#266699 = EDGE_CURVE('',#266700,#266700,#266702,.T.); +#266700 = VERTEX_POINT('',#266701); +#266701 = CARTESIAN_POINT('',(124.97165,-56.8231,1.51)); +#266702 = CIRCLE('',#266703,0.5); +#266703 = AXIS2_PLACEMENT_3D('',#266704,#266705,#266706); +#266704 = CARTESIAN_POINT('',(124.97165,-56.3231,1.51)); +#266705 = DIRECTION('',(-0.,0.,-1.)); +#266706 = DIRECTION('',(-0.,-1.,0.)); +#266707 = FACE_BOUND('',#266708,.T.); +#266708 = EDGE_LOOP('',(#266709)); +#266709 = ORIENTED_EDGE('',*,*,#266710,.T.); +#266710 = EDGE_CURVE('',#266711,#266711,#266713,.T.); +#266711 = VERTEX_POINT('',#266712); +#266712 = CARTESIAN_POINT('',(127.51165,-56.8231,1.51)); +#266713 = CIRCLE('',#266714,0.5); +#266714 = AXIS2_PLACEMENT_3D('',#266715,#266716,#266717); +#266715 = CARTESIAN_POINT('',(127.51165,-56.3231,1.51)); +#266716 = DIRECTION('',(-0.,0.,-1.)); +#266717 = DIRECTION('',(-0.,-1.,0.)); +#266718 = FACE_BOUND('',#266719,.T.); +#266719 = EDGE_LOOP('',(#266720)); +#266720 = ORIENTED_EDGE('',*,*,#266721,.T.); +#266721 = EDGE_CURVE('',#266722,#266722,#266724,.T.); +#266722 = VERTEX_POINT('',#266723); +#266723 = CARTESIAN_POINT('',(130.05165,-56.8231,1.51)); +#266724 = CIRCLE('',#266725,0.5); +#266725 = AXIS2_PLACEMENT_3D('',#266726,#266727,#266728); +#266726 = CARTESIAN_POINT('',(130.05165,-56.3231,1.51)); +#266727 = DIRECTION('',(-0.,0.,-1.)); +#266728 = DIRECTION('',(-0.,-1.,0.)); +#266729 = FACE_BOUND('',#266730,.T.); +#266730 = EDGE_LOOP('',(#266731)); +#266731 = ORIENTED_EDGE('',*,*,#266732,.T.); +#266732 = EDGE_CURVE('',#266733,#266733,#266735,.T.); +#266733 = VERTEX_POINT('',#266734); +#266734 = CARTESIAN_POINT('',(132.59165,-56.8231,1.51)); +#266735 = CIRCLE('',#266736,0.5); +#266736 = AXIS2_PLACEMENT_3D('',#266737,#266738,#266739); +#266737 = CARTESIAN_POINT('',(132.59165,-56.3231,1.51)); +#266738 = DIRECTION('',(-0.,0.,-1.)); +#266739 = DIRECTION('',(-0.,-1.,0.)); +#266740 = FACE_BOUND('',#266741,.T.); +#266741 = EDGE_LOOP('',(#266742)); +#266742 = ORIENTED_EDGE('',*,*,#266743,.T.); +#266743 = EDGE_CURVE('',#266744,#266744,#266746,.T.); +#266744 = VERTEX_POINT('',#266745); +#266745 = CARTESIAN_POINT('',(135.13165,-56.8231,1.51)); +#266746 = CIRCLE('',#266747,0.5); +#266747 = AXIS2_PLACEMENT_3D('',#266748,#266749,#266750); +#266748 = CARTESIAN_POINT('',(135.13165,-56.3231,1.51)); +#266749 = DIRECTION('',(-0.,0.,-1.)); +#266750 = DIRECTION('',(-0.,-1.,0.)); +#266751 = FACE_BOUND('',#266752,.T.); +#266752 = EDGE_LOOP('',(#266753)); +#266753 = ORIENTED_EDGE('',*,*,#266754,.T.); +#266754 = EDGE_CURVE('',#266755,#266755,#266757,.T.); +#266755 = VERTEX_POINT('',#266756); +#266756 = CARTESIAN_POINT('',(137.67165,-56.8231,1.51)); +#266757 = CIRCLE('',#266758,0.5); +#266758 = AXIS2_PLACEMENT_3D('',#266759,#266760,#266761); +#266759 = CARTESIAN_POINT('',(137.67165,-56.3231,1.51)); +#266760 = DIRECTION('',(-0.,0.,-1.)); +#266761 = DIRECTION('',(-0.,-1.,0.)); +#266762 = FACE_BOUND('',#266763,.T.); +#266763 = EDGE_LOOP('',(#266764)); +#266764 = ORIENTED_EDGE('',*,*,#266765,.T.); +#266765 = EDGE_CURVE('',#266766,#266766,#266768,.T.); +#266766 = VERTEX_POINT('',#266767); +#266767 = CARTESIAN_POINT('',(140.21165,-56.8231,1.51)); +#266768 = CIRCLE('',#266769,0.5); +#266769 = AXIS2_PLACEMENT_3D('',#266770,#266771,#266772); +#266770 = CARTESIAN_POINT('',(140.21165,-56.3231,1.51)); +#266771 = DIRECTION('',(-0.,0.,-1.)); +#266772 = DIRECTION('',(-0.,-1.,0.)); +#266773 = FACE_BOUND('',#266774,.T.); +#266774 = EDGE_LOOP('',(#266775)); +#266775 = ORIENTED_EDGE('',*,*,#266776,.T.); +#266776 = EDGE_CURVE('',#266777,#266777,#266779,.T.); +#266777 = VERTEX_POINT('',#266778); +#266778 = CARTESIAN_POINT('',(142.75165,-56.8231,1.51)); +#266779 = CIRCLE('',#266780,0.5); +#266780 = AXIS2_PLACEMENT_3D('',#266781,#266782,#266783); +#266781 = CARTESIAN_POINT('',(142.75165,-56.3231,1.51)); +#266782 = DIRECTION('',(-0.,0.,-1.)); +#266783 = DIRECTION('',(-0.,-1.,0.)); +#266784 = FACE_BOUND('',#266785,.T.); +#266785 = EDGE_LOOP('',(#266786)); +#266786 = ORIENTED_EDGE('',*,*,#266787,.T.); +#266787 = EDGE_CURVE('',#266788,#266788,#266790,.T.); +#266788 = VERTEX_POINT('',#266789); +#266789 = CARTESIAN_POINT('',(145.29165,-56.8231,1.51)); +#266790 = CIRCLE('',#266791,0.5); +#266791 = AXIS2_PLACEMENT_3D('',#266792,#266793,#266794); +#266792 = CARTESIAN_POINT('',(145.29165,-56.3231,1.51)); +#266793 = DIRECTION('',(-0.,0.,-1.)); +#266794 = DIRECTION('',(-0.,-1.,0.)); +#266795 = FACE_BOUND('',#266796,.T.); +#266796 = EDGE_LOOP('',(#266797)); +#266797 = ORIENTED_EDGE('',*,*,#266798,.T.); +#266798 = EDGE_CURVE('',#266799,#266799,#266801,.T.); +#266799 = VERTEX_POINT('',#266800); +#266800 = CARTESIAN_POINT('',(147.83165,-56.8231,1.51)); +#266801 = CIRCLE('',#266802,0.5); +#266802 = AXIS2_PLACEMENT_3D('',#266803,#266804,#266805); +#266803 = CARTESIAN_POINT('',(147.83165,-56.3231,1.51)); +#266804 = DIRECTION('',(-0.,0.,-1.)); +#266805 = DIRECTION('',(-0.,-1.,0.)); +#266806 = FACE_BOUND('',#266807,.T.); +#266807 = EDGE_LOOP('',(#266808)); +#266808 = ORIENTED_EDGE('',*,*,#266809,.T.); +#266809 = EDGE_CURVE('',#266810,#266810,#266812,.T.); +#266810 = VERTEX_POINT('',#266811); +#266811 = CARTESIAN_POINT('',(116.19165,-46.7981,1.51)); +#266812 = CIRCLE('',#266813,0.475); +#266813 = AXIS2_PLACEMENT_3D('',#266814,#266815,#266816); +#266814 = CARTESIAN_POINT('',(116.19165,-46.3231,1.51)); +#266815 = DIRECTION('',(-0.,0.,-1.)); +#266816 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266817 = FACE_BOUND('',#266818,.T.); +#266818 = EDGE_LOOP('',(#266819)); +#266819 = ORIENTED_EDGE('',*,*,#266820,.T.); +#266820 = EDGE_CURVE('',#266821,#266821,#266823,.T.); +#266821 = VERTEX_POINT('',#266822); +#266822 = CARTESIAN_POINT('',(118.69165,-46.7981,1.51)); +#266823 = CIRCLE('',#266824,0.475); +#266824 = AXIS2_PLACEMENT_3D('',#266825,#266826,#266827); +#266825 = CARTESIAN_POINT('',(118.69165,-46.3231,1.51)); +#266826 = DIRECTION('',(-0.,0.,-1.)); +#266827 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266828 = FACE_BOUND('',#266829,.T.); +#266829 = EDGE_LOOP('',(#266830)); +#266830 = ORIENTED_EDGE('',*,*,#266831,.T.); +#266831 = EDGE_CURVE('',#266832,#266832,#266834,.T.); +#266832 = VERTEX_POINT('',#266833); +#266833 = CARTESIAN_POINT('',(121.19165,-46.7981,1.51)); +#266834 = CIRCLE('',#266835,0.475); +#266835 = AXIS2_PLACEMENT_3D('',#266836,#266837,#266838); +#266836 = CARTESIAN_POINT('',(121.19165,-46.3231,1.51)); +#266837 = DIRECTION('',(-0.,0.,-1.)); +#266838 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#266839 = FACE_BOUND('',#266840,.T.); +#266840 = EDGE_LOOP('',(#266841)); +#266841 = ORIENTED_EDGE('',*,*,#266842,.T.); +#266842 = EDGE_CURVE('',#266843,#266843,#266845,.T.); +#266843 = VERTEX_POINT('',#266844); +#266844 = CARTESIAN_POINT('',(127.19165,-46.8231,1.51)); +#266845 = CIRCLE('',#266846,0.5); +#266846 = AXIS2_PLACEMENT_3D('',#266847,#266848,#266849); +#266847 = CARTESIAN_POINT('',(127.19165,-46.3231,1.51)); +#266848 = DIRECTION('',(-0.,0.,-1.)); +#266849 = DIRECTION('',(-0.,-1.,0.)); +#266850 = FACE_BOUND('',#266851,.T.); +#266851 = EDGE_LOOP('',(#266852)); +#266852 = ORIENTED_EDGE('',*,*,#266853,.T.); +#266853 = EDGE_CURVE('',#266854,#266854,#266856,.T.); +#266854 = VERTEX_POINT('',#266855); +#266855 = CARTESIAN_POINT('',(129.69165,-46.8231,1.51)); +#266856 = CIRCLE('',#266857,0.5); +#266857 = AXIS2_PLACEMENT_3D('',#266858,#266859,#266860); +#266858 = CARTESIAN_POINT('',(129.69165,-46.3231,1.51)); +#266859 = DIRECTION('',(-0.,0.,-1.)); +#266860 = DIRECTION('',(-0.,-1.,0.)); +#266861 = FACE_BOUND('',#266862,.T.); +#266862 = EDGE_LOOP('',(#266863)); +#266863 = ORIENTED_EDGE('',*,*,#266864,.T.); +#266864 = EDGE_CURVE('',#266865,#266865,#266867,.T.); +#266865 = VERTEX_POINT('',#266866); +#266866 = CARTESIAN_POINT('',(135.79165,-46.8231,1.51)); +#266867 = CIRCLE('',#266868,0.5); +#266868 = AXIS2_PLACEMENT_3D('',#266869,#266870,#266871); +#266869 = CARTESIAN_POINT('',(135.79165,-46.3231,1.51)); +#266870 = DIRECTION('',(-0.,0.,-1.)); +#266871 = DIRECTION('',(-0.,-1.,0.)); +#266872 = FACE_BOUND('',#266873,.T.); +#266873 = EDGE_LOOP('',(#266874)); +#266874 = ORIENTED_EDGE('',*,*,#266875,.T.); +#266875 = EDGE_CURVE('',#266876,#266876,#266878,.T.); +#266876 = VERTEX_POINT('',#266877); +#266877 = CARTESIAN_POINT('',(138.29165,-46.8231,1.51)); +#266878 = CIRCLE('',#266879,0.5); +#266879 = AXIS2_PLACEMENT_3D('',#266880,#266881,#266882); +#266880 = CARTESIAN_POINT('',(138.29165,-46.3231,1.51)); +#266881 = DIRECTION('',(-0.,0.,-1.)); +#266882 = DIRECTION('',(-0.,-1.,0.)); +#266883 = FACE_BOUND('',#266884,.T.); +#266884 = EDGE_LOOP('',(#266885)); +#266885 = ORIENTED_EDGE('',*,*,#266886,.T.); +#266886 = EDGE_CURVE('',#266887,#266887,#266889,.T.); +#266887 = VERTEX_POINT('',#266888); +#266888 = CARTESIAN_POINT('',(148.27165,-81.8231,1.51)); +#266889 = CIRCLE('',#266890,0.5); +#266890 = AXIS2_PLACEMENT_3D('',#266891,#266892,#266893); +#266891 = CARTESIAN_POINT('',(148.27165,-81.3231,1.51)); +#266892 = DIRECTION('',(-0.,0.,-1.)); +#266893 = DIRECTION('',(-0.,-1.,0.)); +#266894 = FACE_BOUND('',#266895,.T.); +#266895 = EDGE_LOOP('',(#266896)); +#266896 = ORIENTED_EDGE('',*,*,#266897,.T.); +#266897 = EDGE_CURVE('',#266898,#266898,#266900,.T.); +#266898 = VERTEX_POINT('',#266899); +#266899 = CARTESIAN_POINT('',(150.81165,-81.8231,1.51)); +#266900 = CIRCLE('',#266901,0.5); +#266901 = AXIS2_PLACEMENT_3D('',#266902,#266903,#266904); +#266902 = CARTESIAN_POINT('',(150.81165,-81.3231,1.51)); +#266903 = DIRECTION('',(-0.,0.,-1.)); +#266904 = DIRECTION('',(-0.,-1.,0.)); +#266905 = FACE_BOUND('',#266906,.T.); +#266906 = EDGE_LOOP('',(#266907)); +#266907 = ORIENTED_EDGE('',*,*,#266908,.T.); +#266908 = EDGE_CURVE('',#266909,#266909,#266911,.T.); +#266909 = VERTEX_POINT('',#266910); +#266910 = CARTESIAN_POINT('',(174.19165,-91.2231,1.51)); +#266911 = CIRCLE('',#266912,0.4); +#266912 = AXIS2_PLACEMENT_3D('',#266913,#266914,#266915); +#266913 = CARTESIAN_POINT('',(174.19165,-90.8231,1.51)); +#266914 = DIRECTION('',(-0.,0.,-1.)); +#266915 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266916 = FACE_BOUND('',#266917,.T.); +#266917 = EDGE_LOOP('',(#266918)); +#266918 = ORIENTED_EDGE('',*,*,#266919,.T.); +#266919 = EDGE_CURVE('',#266920,#266920,#266922,.T.); +#266920 = VERTEX_POINT('',#266921); +#266921 = CARTESIAN_POINT('',(174.19165,-89.2231,1.51)); +#266922 = CIRCLE('',#266923,0.4); +#266923 = AXIS2_PLACEMENT_3D('',#266924,#266925,#266926); +#266924 = CARTESIAN_POINT('',(174.19165,-88.8231,1.51)); +#266925 = DIRECTION('',(-0.,0.,-1.)); +#266926 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266927 = FACE_BOUND('',#266928,.T.); +#266928 = EDGE_LOOP('',(#266929)); +#266929 = ORIENTED_EDGE('',*,*,#266930,.T.); +#266930 = EDGE_CURVE('',#266931,#266931,#266933,.T.); +#266931 = VERTEX_POINT('',#266932); +#266932 = CARTESIAN_POINT('',(174.19165,-87.2231,1.51)); +#266933 = CIRCLE('',#266934,0.4); +#266934 = AXIS2_PLACEMENT_3D('',#266935,#266936,#266937); +#266935 = CARTESIAN_POINT('',(174.19165,-86.8231,1.51)); +#266936 = DIRECTION('',(-0.,0.,-1.)); +#266937 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266938 = FACE_BOUND('',#266939,.T.); +#266939 = EDGE_LOOP('',(#266940)); +#266940 = ORIENTED_EDGE('',*,*,#266941,.T.); +#266941 = EDGE_CURVE('',#266942,#266942,#266944,.T.); +#266942 = VERTEX_POINT('',#266943); +#266943 = CARTESIAN_POINT('',(174.19165,-85.2231,1.51)); +#266944 = CIRCLE('',#266945,0.4); +#266945 = AXIS2_PLACEMENT_3D('',#266946,#266947,#266948); +#266946 = CARTESIAN_POINT('',(174.19165,-84.8231,1.51)); +#266947 = DIRECTION('',(-0.,0.,-1.)); +#266948 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266949 = FACE_BOUND('',#266950,.T.); +#266950 = EDGE_LOOP('',(#266951)); +#266951 = ORIENTED_EDGE('',*,*,#266952,.T.); +#266952 = EDGE_CURVE('',#266953,#266953,#266955,.T.); +#266953 = VERTEX_POINT('',#266954); +#266954 = CARTESIAN_POINT('',(174.19165,-83.2231,1.51)); +#266955 = CIRCLE('',#266956,0.4); +#266956 = AXIS2_PLACEMENT_3D('',#266957,#266958,#266959); +#266957 = CARTESIAN_POINT('',(174.19165,-82.8231,1.51)); +#266958 = DIRECTION('',(-0.,0.,-1.)); +#266959 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266960 = FACE_BOUND('',#266961,.T.); +#266961 = EDGE_LOOP('',(#266962)); +#266962 = ORIENTED_EDGE('',*,*,#266963,.T.); +#266963 = EDGE_CURVE('',#266964,#266964,#266966,.T.); +#266964 = VERTEX_POINT('',#266965); +#266965 = CARTESIAN_POINT('',(174.19165,-81.2231,1.51)); +#266966 = CIRCLE('',#266967,0.4); +#266967 = AXIS2_PLACEMENT_3D('',#266968,#266969,#266970); +#266968 = CARTESIAN_POINT('',(174.19165,-80.8231,1.51)); +#266969 = DIRECTION('',(-0.,0.,-1.)); +#266970 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#266971 = FACE_BOUND('',#266972,.T.); +#266972 = EDGE_LOOP('',(#266973)); +#266973 = ORIENTED_EDGE('',*,*,#266974,.T.); +#266974 = EDGE_CURVE('',#266975,#266975,#266977,.T.); +#266975 = VERTEX_POINT('',#266976); +#266976 = CARTESIAN_POINT('',(150.37165,-74.6031,1.51)); +#266977 = CIRCLE('',#266978,0.5); +#266978 = AXIS2_PLACEMENT_3D('',#266979,#266980,#266981); +#266979 = CARTESIAN_POINT('',(150.37165,-74.1031,1.51)); +#266980 = DIRECTION('',(-0.,0.,-1.)); +#266981 = DIRECTION('',(-0.,-1.,0.)); +#266982 = FACE_BOUND('',#266983,.T.); +#266983 = EDGE_LOOP('',(#266984)); +#266984 = ORIENTED_EDGE('',*,*,#266985,.T.); +#266985 = EDGE_CURVE('',#266986,#266986,#266988,.T.); +#266986 = VERTEX_POINT('',#266987); +#266987 = CARTESIAN_POINT('',(152.91165,-74.6031,1.51)); +#266988 = CIRCLE('',#266989,0.5); +#266989 = AXIS2_PLACEMENT_3D('',#266990,#266991,#266992); +#266990 = CARTESIAN_POINT('',(152.91165,-74.1031,1.51)); +#266991 = DIRECTION('',(-0.,0.,-1.)); +#266992 = DIRECTION('',(-0.,-1.,0.)); +#266993 = FACE_BOUND('',#266994,.T.); +#266994 = EDGE_LOOP('',(#266995)); +#266995 = ORIENTED_EDGE('',*,*,#266996,.T.); +#266996 = EDGE_CURVE('',#266997,#266997,#266999,.T.); +#266997 = VERTEX_POINT('',#266998); +#266998 = CARTESIAN_POINT('',(155.45165,-74.6031,1.51)); +#266999 = CIRCLE('',#267000,0.5); +#267000 = AXIS2_PLACEMENT_3D('',#267001,#267002,#267003); +#267001 = CARTESIAN_POINT('',(155.45165,-74.1031,1.51)); +#267002 = DIRECTION('',(-0.,0.,-1.)); +#267003 = DIRECTION('',(-0.,-1.,0.)); +#267004 = FACE_BOUND('',#267005,.T.); +#267005 = EDGE_LOOP('',(#267006)); +#267006 = ORIENTED_EDGE('',*,*,#267007,.T.); +#267007 = EDGE_CURVE('',#267008,#267008,#267010,.T.); +#267008 = VERTEX_POINT('',#267009); +#267009 = CARTESIAN_POINT('',(174.19165,-79.2231,1.51)); +#267010 = CIRCLE('',#267011,0.4); +#267011 = AXIS2_PLACEMENT_3D('',#267012,#267013,#267014); +#267012 = CARTESIAN_POINT('',(174.19165,-78.8231,1.51)); +#267013 = DIRECTION('',(-0.,0.,-1.)); +#267014 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#267015 = FACE_BOUND('',#267016,.T.); +#267016 = EDGE_LOOP('',(#267017)); +#267017 = ORIENTED_EDGE('',*,*,#267018,.T.); +#267018 = EDGE_CURVE('',#267019,#267019,#267021,.T.); +#267019 = VERTEX_POINT('',#267020); +#267020 = CARTESIAN_POINT('',(174.19165,-77.2231,1.51)); +#267021 = CIRCLE('',#267022,0.4); +#267022 = AXIS2_PLACEMENT_3D('',#267023,#267024,#267025); +#267023 = CARTESIAN_POINT('',(174.19165,-76.8231,1.51)); +#267024 = DIRECTION('',(-0.,0.,-1.)); +#267025 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#267026 = FACE_BOUND('',#267027,.T.); +#267027 = EDGE_LOOP('',(#267028)); +#267028 = ORIENTED_EDGE('',*,*,#267029,.T.); +#267029 = EDGE_CURVE('',#267030,#267030,#267032,.T.); +#267030 = VERTEX_POINT('',#267031); +#267031 = CARTESIAN_POINT('',(174.19165,-75.2231,1.51)); +#267032 = CIRCLE('',#267033,0.4); +#267033 = AXIS2_PLACEMENT_3D('',#267034,#267035,#267036); +#267034 = CARTESIAN_POINT('',(174.19165,-74.8231,1.51)); +#267035 = DIRECTION('',(-0.,0.,-1.)); +#267036 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#267037 = FACE_BOUND('',#267038,.T.); +#267038 = EDGE_LOOP('',(#267039)); +#267039 = ORIENTED_EDGE('',*,*,#267040,.T.); +#267040 = EDGE_CURVE('',#267041,#267041,#267043,.T.); +#267041 = VERTEX_POINT('',#267042); +#267042 = CARTESIAN_POINT('',(196.54165,-91.2231,1.51)); +#267043 = CIRCLE('',#267044,0.4); +#267044 = AXIS2_PLACEMENT_3D('',#267045,#267046,#267047); +#267045 = CARTESIAN_POINT('',(196.54165,-90.8231,1.51)); +#267046 = DIRECTION('',(-0.,0.,-1.)); +#267047 = DIRECTION('',(-0.,-1.,0.)); +#267048 = FACE_BOUND('',#267049,.T.); +#267049 = EDGE_LOOP('',(#267050)); +#267050 = ORIENTED_EDGE('',*,*,#267051,.T.); +#267051 = EDGE_CURVE('',#267052,#267052,#267054,.T.); +#267052 = VERTEX_POINT('',#267053); +#267053 = CARTESIAN_POINT('',(196.54165,-89.2231,1.51)); +#267054 = CIRCLE('',#267055,0.4); +#267055 = AXIS2_PLACEMENT_3D('',#267056,#267057,#267058); +#267056 = CARTESIAN_POINT('',(196.54165,-88.8231,1.51)); +#267057 = DIRECTION('',(-0.,0.,-1.)); +#267058 = DIRECTION('',(-0.,-1.,0.)); +#267059 = FACE_BOUND('',#267060,.T.); +#267060 = EDGE_LOOP('',(#267061)); +#267061 = ORIENTED_EDGE('',*,*,#267062,.T.); +#267062 = EDGE_CURVE('',#267063,#267063,#267065,.T.); +#267063 = VERTEX_POINT('',#267064); +#267064 = CARTESIAN_POINT('',(196.54165,-87.2231,1.51)); +#267065 = CIRCLE('',#267066,0.4); +#267066 = AXIS2_PLACEMENT_3D('',#267067,#267068,#267069); +#267067 = CARTESIAN_POINT('',(196.54165,-86.8231,1.51)); +#267068 = DIRECTION('',(-0.,0.,-1.)); +#267069 = DIRECTION('',(-0.,-1.,0.)); +#267070 = FACE_BOUND('',#267071,.T.); +#267071 = EDGE_LOOP('',(#267072)); +#267072 = ORIENTED_EDGE('',*,*,#267073,.T.); +#267073 = EDGE_CURVE('',#267074,#267074,#267076,.T.); +#267074 = VERTEX_POINT('',#267075); +#267075 = CARTESIAN_POINT('',(196.54165,-85.2231,1.51)); +#267076 = CIRCLE('',#267077,0.4); +#267077 = AXIS2_PLACEMENT_3D('',#267078,#267079,#267080); +#267078 = CARTESIAN_POINT('',(196.54165,-84.8231,1.51)); +#267079 = DIRECTION('',(-0.,0.,-1.)); +#267080 = DIRECTION('',(-0.,-1.,0.)); +#267081 = FACE_BOUND('',#267082,.T.); +#267082 = EDGE_LOOP('',(#267083)); +#267083 = ORIENTED_EDGE('',*,*,#267084,.T.); +#267084 = EDGE_CURVE('',#267085,#267085,#267087,.T.); +#267085 = VERTEX_POINT('',#267086); +#267086 = CARTESIAN_POINT('',(196.54165,-83.2231,1.51)); +#267087 = CIRCLE('',#267088,0.4); +#267088 = AXIS2_PLACEMENT_3D('',#267089,#267090,#267091); +#267089 = CARTESIAN_POINT('',(196.54165,-82.8231,1.51)); +#267090 = DIRECTION('',(-0.,0.,-1.)); +#267091 = DIRECTION('',(-0.,-1.,0.)); +#267092 = FACE_BOUND('',#267093,.T.); +#267093 = EDGE_LOOP('',(#267094)); +#267094 = ORIENTED_EDGE('',*,*,#267095,.T.); +#267095 = EDGE_CURVE('',#267096,#267096,#267098,.T.); +#267096 = VERTEX_POINT('',#267097); +#267097 = CARTESIAN_POINT('',(196.54165,-81.2231,1.51)); +#267098 = CIRCLE('',#267099,0.4); +#267099 = AXIS2_PLACEMENT_3D('',#267100,#267101,#267102); +#267100 = CARTESIAN_POINT('',(196.54165,-80.8231,1.51)); +#267101 = DIRECTION('',(-0.,0.,-1.)); +#267102 = DIRECTION('',(-0.,-1.,0.)); +#267103 = FACE_BOUND('',#267104,.T.); +#267104 = EDGE_LOOP('',(#267105)); +#267105 = ORIENTED_EDGE('',*,*,#267106,.T.); +#267106 = EDGE_CURVE('',#267107,#267107,#267109,.T.); +#267107 = VERTEX_POINT('',#267108); +#267108 = CARTESIAN_POINT('',(210.19165,-90.7981,1.51)); +#267109 = CIRCLE('',#267110,0.475); +#267110 = AXIS2_PLACEMENT_3D('',#267111,#267112,#267113); +#267111 = CARTESIAN_POINT('',(210.19165,-90.3231,1.51)); +#267112 = DIRECTION('',(-0.,0.,-1.)); +#267113 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267114 = FACE_BOUND('',#267115,.T.); +#267115 = EDGE_LOOP('',(#267116)); +#267116 = ORIENTED_EDGE('',*,*,#267117,.T.); +#267117 = EDGE_CURVE('',#267118,#267118,#267120,.T.); +#267118 = VERTEX_POINT('',#267119); +#267119 = CARTESIAN_POINT('',(210.19165,-88.2981,1.51)); +#267120 = CIRCLE('',#267121,0.475); +#267121 = AXIS2_PLACEMENT_3D('',#267122,#267123,#267124); +#267122 = CARTESIAN_POINT('',(210.19165,-87.8231,1.51)); +#267123 = DIRECTION('',(-0.,0.,-1.)); +#267124 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267125 = FACE_BOUND('',#267126,.T.); +#267126 = EDGE_LOOP('',(#267127)); +#267127 = ORIENTED_EDGE('',*,*,#267128,.T.); +#267128 = EDGE_CURVE('',#267129,#267129,#267131,.T.); +#267129 = VERTEX_POINT('',#267130); +#267130 = CARTESIAN_POINT('',(210.16665,-80.5731,1.51)); +#267131 = CIRCLE('',#267132,0.5); +#267132 = AXIS2_PLACEMENT_3D('',#267133,#267134,#267135); +#267133 = CARTESIAN_POINT('',(210.16665,-80.0731,1.51)); +#267134 = DIRECTION('',(-0.,0.,-1.)); +#267135 = DIRECTION('',(-0.,-1.,0.)); +#267136 = FACE_BOUND('',#267137,.T.); +#267137 = EDGE_LOOP('',(#267138)); +#267138 = ORIENTED_EDGE('',*,*,#267139,.T.); +#267139 = EDGE_CURVE('',#267140,#267140,#267142,.T.); +#267140 = VERTEX_POINT('',#267141); +#267141 = CARTESIAN_POINT('',(196.54165,-79.2231,1.51)); +#267142 = CIRCLE('',#267143,0.4); +#267143 = AXIS2_PLACEMENT_3D('',#267144,#267145,#267146); +#267144 = CARTESIAN_POINT('',(196.54165,-78.8231,1.51)); +#267145 = DIRECTION('',(-0.,0.,-1.)); +#267146 = DIRECTION('',(-0.,-1.,0.)); +#267147 = FACE_BOUND('',#267148,.T.); +#267148 = EDGE_LOOP('',(#267149)); +#267149 = ORIENTED_EDGE('',*,*,#267150,.T.); +#267150 = EDGE_CURVE('',#267151,#267151,#267153,.T.); +#267151 = VERTEX_POINT('',#267152); +#267152 = CARTESIAN_POINT('',(196.54165,-77.2231,1.51)); +#267153 = CIRCLE('',#267154,0.4); +#267154 = AXIS2_PLACEMENT_3D('',#267155,#267156,#267157); +#267155 = CARTESIAN_POINT('',(196.54165,-76.8231,1.51)); +#267156 = DIRECTION('',(-0.,0.,-1.)); +#267157 = DIRECTION('',(-0.,-1.,0.)); +#267158 = FACE_BOUND('',#267159,.T.); +#267159 = EDGE_LOOP('',(#267160)); +#267160 = ORIENTED_EDGE('',*,*,#267161,.T.); +#267161 = EDGE_CURVE('',#267162,#267162,#267164,.T.); +#267162 = VERTEX_POINT('',#267163); +#267163 = CARTESIAN_POINT('',(196.54165,-75.2231,1.51)); +#267164 = CIRCLE('',#267165,0.4); +#267165 = AXIS2_PLACEMENT_3D('',#267166,#267167,#267168); +#267166 = CARTESIAN_POINT('',(196.54165,-74.8231,1.51)); +#267167 = DIRECTION('',(-0.,0.,-1.)); +#267168 = DIRECTION('',(-0.,-1.,0.)); +#267169 = FACE_BOUND('',#267170,.T.); +#267170 = EDGE_LOOP('',(#267171)); +#267171 = ORIENTED_EDGE('',*,*,#267172,.T.); +#267172 = EDGE_CURVE('',#267173,#267173,#267175,.T.); +#267173 = VERTEX_POINT('',#267174); +#267174 = CARTESIAN_POINT('',(210.16665,-78.0731,1.51)); +#267175 = CIRCLE('',#267176,0.5); +#267176 = AXIS2_PLACEMENT_3D('',#267177,#267178,#267179); +#267177 = CARTESIAN_POINT('',(210.16665,-77.5731,1.51)); +#267178 = DIRECTION('',(-0.,0.,-1.)); +#267179 = DIRECTION('',(-0.,-1.,0.)); +#267180 = FACE_BOUND('',#267181,.T.); +#267181 = EDGE_LOOP('',(#267182)); +#267182 = ORIENTED_EDGE('',*,*,#267183,.T.); +#267183 = EDGE_CURVE('',#267184,#267184,#267186,.T.); +#267184 = VERTEX_POINT('',#267185); +#267185 = CARTESIAN_POINT('',(210.16665,-71.3231,1.51)); +#267186 = CIRCLE('',#267187,0.5); +#267187 = AXIS2_PLACEMENT_3D('',#267188,#267189,#267190); +#267188 = CARTESIAN_POINT('',(210.16665,-70.8231,1.51)); +#267189 = DIRECTION('',(-0.,0.,-1.)); +#267190 = DIRECTION('',(-0.,-1.,0.)); +#267191 = FACE_BOUND('',#267192,.T.); +#267192 = EDGE_LOOP('',(#267193)); +#267193 = ORIENTED_EDGE('',*,*,#267194,.T.); +#267194 = EDGE_CURVE('',#267195,#267195,#267197,.T.); +#267195 = VERTEX_POINT('',#267196); +#267196 = CARTESIAN_POINT('',(210.16665,-68.8231,1.51)); +#267197 = CIRCLE('',#267198,0.5); +#267198 = AXIS2_PLACEMENT_3D('',#267199,#267200,#267201); +#267199 = CARTESIAN_POINT('',(210.16665,-68.3231,1.51)); +#267200 = DIRECTION('',(-0.,0.,-1.)); +#267201 = DIRECTION('',(-0.,-1.,0.)); +#267202 = FACE_BOUND('',#267203,.T.); +#267203 = EDGE_LOOP('',(#267204)); +#267204 = ORIENTED_EDGE('',*,*,#267205,.T.); +#267205 = EDGE_CURVE('',#267206,#267206,#267208,.T.); +#267206 = VERTEX_POINT('',#267207); +#267207 = CARTESIAN_POINT('',(150.37165,-56.8231,1.51)); +#267208 = CIRCLE('',#267209,0.5); +#267209 = AXIS2_PLACEMENT_3D('',#267210,#267211,#267212); +#267210 = CARTESIAN_POINT('',(150.37165,-56.3231,1.51)); +#267211 = DIRECTION('',(-0.,0.,-1.)); +#267212 = DIRECTION('',(-0.,-1.,0.)); +#267213 = FACE_BOUND('',#267214,.T.); +#267214 = EDGE_LOOP('',(#267215)); +#267215 = ORIENTED_EDGE('',*,*,#267216,.T.); +#267216 = EDGE_CURVE('',#267217,#267217,#267219,.T.); +#267217 = VERTEX_POINT('',#267218); +#267218 = CARTESIAN_POINT('',(152.91165,-56.8231,1.51)); +#267219 = CIRCLE('',#267220,0.5); +#267220 = AXIS2_PLACEMENT_3D('',#267221,#267222,#267223); +#267221 = CARTESIAN_POINT('',(152.91165,-56.3231,1.51)); +#267222 = DIRECTION('',(-0.,0.,-1.)); +#267223 = DIRECTION('',(-0.,-1.,0.)); +#267224 = FACE_BOUND('',#267225,.T.); +#267225 = EDGE_LOOP('',(#267226)); +#267226 = ORIENTED_EDGE('',*,*,#267227,.T.); +#267227 = EDGE_CURVE('',#267228,#267228,#267230,.T.); +#267228 = VERTEX_POINT('',#267229); +#267229 = CARTESIAN_POINT('',(155.45165,-56.8231,1.51)); +#267230 = CIRCLE('',#267231,0.5); +#267231 = AXIS2_PLACEMENT_3D('',#267232,#267233,#267234); +#267232 = CARTESIAN_POINT('',(155.45165,-56.3231,1.51)); +#267233 = DIRECTION('',(-0.,0.,-1.)); +#267234 = DIRECTION('',(-0.,-1.,0.)); +#267235 = FACE_BOUND('',#267236,.T.); +#267236 = EDGE_LOOP('',(#267237)); +#267237 = ORIENTED_EDGE('',*,*,#267238,.T.); +#267238 = EDGE_CURVE('',#267239,#267239,#267241,.T.); +#267239 = VERTEX_POINT('',#267240); +#267240 = CARTESIAN_POINT('',(189.28415,-66.5256,1.51)); +#267241 = CIRCLE('',#267242,0.5); +#267242 = AXIS2_PLACEMENT_3D('',#267243,#267244,#267245); +#267243 = CARTESIAN_POINT('',(189.28415,-66.0256,1.51)); +#267244 = DIRECTION('',(-0.,0.,-1.)); +#267245 = DIRECTION('',(-0.,-1.,0.)); +#267246 = FACE_BOUND('',#267247,.T.); +#267247 = EDGE_LOOP('',(#267248)); +#267248 = ORIENTED_EDGE('',*,*,#267249,.T.); +#267249 = EDGE_CURVE('',#267250,#267250,#267252,.T.); +#267250 = VERTEX_POINT('',#267251); +#267251 = CARTESIAN_POINT('',(194.36415,-66.5256,1.51)); +#267252 = CIRCLE('',#267253,0.5); +#267253 = AXIS2_PLACEMENT_3D('',#267254,#267255,#267256); +#267254 = CARTESIAN_POINT('',(194.36415,-66.0256,1.51)); +#267255 = DIRECTION('',(-0.,0.,-1.)); +#267256 = DIRECTION('',(-0.,-1.,0.)); +#267257 = FACE_BOUND('',#267258,.T.); +#267258 = EDGE_LOOP('',(#267259)); +#267259 = ORIENTED_EDGE('',*,*,#267260,.T.); +#267260 = EDGE_CURVE('',#267261,#267261,#267263,.T.); +#267261 = VERTEX_POINT('',#267262); +#267262 = CARTESIAN_POINT('',(189.28415,-58.9056,1.51)); +#267263 = CIRCLE('',#267264,0.5); +#267264 = AXIS2_PLACEMENT_3D('',#267265,#267266,#267267); +#267265 = CARTESIAN_POINT('',(189.28415,-58.4056,1.51)); +#267266 = DIRECTION('',(-0.,0.,-1.)); +#267267 = DIRECTION('',(-0.,-1.,0.)); +#267268 = FACE_BOUND('',#267269,.T.); +#267269 = EDGE_LOOP('',(#267270)); +#267270 = ORIENTED_EDGE('',*,*,#267271,.T.); +#267271 = EDGE_CURVE('',#267272,#267272,#267274,.T.); +#267272 = VERTEX_POINT('',#267273); +#267273 = CARTESIAN_POINT('',(189.28415,-56.3656,1.51)); +#267274 = CIRCLE('',#267275,0.5); +#267275 = AXIS2_PLACEMENT_3D('',#267276,#267277,#267278); +#267276 = CARTESIAN_POINT('',(189.28415,-55.8656,1.51)); +#267277 = DIRECTION('',(-0.,0.,-1.)); +#267278 = DIRECTION('',(-0.,-1.,0.)); +#267279 = FACE_BOUND('',#267280,.T.); +#267280 = EDGE_LOOP('',(#267281)); +#267281 = ORIENTED_EDGE('',*,*,#267282,.T.); +#267282 = EDGE_CURVE('',#267283,#267283,#267285,.T.); +#267283 = VERTEX_POINT('',#267284); +#267284 = CARTESIAN_POINT('',(194.36415,-58.9056,1.51)); +#267285 = CIRCLE('',#267286,0.5); +#267286 = AXIS2_PLACEMENT_3D('',#267287,#267288,#267289); +#267287 = CARTESIAN_POINT('',(194.36415,-58.4056,1.51)); +#267288 = DIRECTION('',(-0.,0.,-1.)); +#267289 = DIRECTION('',(-0.,-1.,0.)); +#267290 = FACE_BOUND('',#267291,.T.); +#267291 = EDGE_LOOP('',(#267292)); +#267292 = ORIENTED_EDGE('',*,*,#267293,.T.); +#267293 = EDGE_CURVE('',#267294,#267294,#267296,.T.); +#267294 = VERTEX_POINT('',#267295); +#267295 = CARTESIAN_POINT('',(194.36415,-56.3656,1.51)); +#267296 = CIRCLE('',#267297,0.5); +#267297 = AXIS2_PLACEMENT_3D('',#267298,#267299,#267300); +#267298 = CARTESIAN_POINT('',(194.36415,-55.8656,1.51)); +#267299 = DIRECTION('',(-0.,0.,-1.)); +#267300 = DIRECTION('',(-0.,-1.,0.)); +#267301 = FACE_BOUND('',#267302,.T.); +#267302 = EDGE_LOOP('',(#267303)); +#267303 = ORIENTED_EDGE('',*,*,#267304,.T.); +#267304 = EDGE_CURVE('',#267305,#267305,#267307,.T.); +#267305 = VERTEX_POINT('',#267306); +#267306 = CARTESIAN_POINT('',(210.19165,-62.2981,1.51)); +#267307 = CIRCLE('',#267308,0.475); +#267308 = AXIS2_PLACEMENT_3D('',#267309,#267310,#267311); +#267309 = CARTESIAN_POINT('',(210.19165,-61.8231,1.51)); +#267310 = DIRECTION('',(-0.,0.,-1.)); +#267311 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267312 = FACE_BOUND('',#267313,.T.); +#267313 = EDGE_LOOP('',(#267314)); +#267314 = ORIENTED_EDGE('',*,*,#267315,.T.); +#267315 = EDGE_CURVE('',#267316,#267316,#267318,.T.); +#267316 = VERTEX_POINT('',#267317); +#267317 = CARTESIAN_POINT('',(210.19165,-59.7981,1.51)); +#267318 = CIRCLE('',#267319,0.475); +#267319 = AXIS2_PLACEMENT_3D('',#267320,#267321,#267322); +#267320 = CARTESIAN_POINT('',(210.19165,-59.3231,1.51)); +#267321 = DIRECTION('',(-0.,0.,-1.)); +#267322 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267323 = FACE_BOUND('',#267324,.T.); +#267324 = EDGE_LOOP('',(#267325)); +#267325 = ORIENTED_EDGE('',*,*,#267326,.T.); +#267326 = EDGE_CURVE('',#267327,#267327,#267329,.T.); +#267327 = VERTEX_POINT('',#267328); +#267328 = CARTESIAN_POINT('',(210.19165,-57.2981,1.51)); +#267329 = CIRCLE('',#267330,0.475); +#267330 = AXIS2_PLACEMENT_3D('',#267331,#267332,#267333); +#267331 = CARTESIAN_POINT('',(210.19165,-56.8231,1.51)); +#267332 = DIRECTION('',(-0.,0.,-1.)); +#267333 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267334 = FACE_BOUND('',#267335,.T.); +#267335 = EDGE_LOOP('',(#267336)); +#267336 = ORIENTED_EDGE('',*,*,#267337,.T.); +#267337 = EDGE_CURVE('',#267338,#267338,#267340,.T.); +#267338 = VERTEX_POINT('',#267339); +#267339 = CARTESIAN_POINT('',(210.19165,-54.7981,1.51)); +#267340 = CIRCLE('',#267341,0.475); +#267341 = AXIS2_PLACEMENT_3D('',#267342,#267343,#267344); +#267342 = CARTESIAN_POINT('',(210.19165,-54.3231,1.51)); +#267343 = DIRECTION('',(-0.,0.,-1.)); +#267344 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#267345 = FACE_BOUND('',#267346,.T.); +#267346 = EDGE_LOOP('',(#267347)); +#267347 = ORIENTED_EDGE('',*,*,#267348,.T.); +#267348 = EDGE_CURVE('',#267349,#267349,#267351,.T.); +#267349 = VERTEX_POINT('',#267350); +#267350 = CARTESIAN_POINT('',(211.19165,-46.9231,1.51)); +#267351 = CIRCLE('',#267352,1.6); +#267352 = AXIS2_PLACEMENT_3D('',#267353,#267354,#267355); +#267353 = CARTESIAN_POINT('',(211.19165,-45.3231,1.51)); +#267354 = DIRECTION('',(-0.,0.,-1.)); +#267355 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#267356 = PLANE('',#267357); +#267357 = AXIS2_PLACEMENT_3D('',#267358,#267359,#267360); +#267358 = CARTESIAN_POINT('',(0.,0.,1.51)); +#267359 = DIRECTION('',(0.,0.,1.)); +#267360 = DIRECTION('',(1.,0.,-0.)); +#267361 = ADVANCED_FACE('',(#267362),#267368,.T.); +#267362 = FACE_BOUND('',#267363,.T.); +#267363 = EDGE_LOOP('',(#267364,#267365,#267366,#267367)); +#267364 = ORIENTED_EDGE('',*,*,#263545,.T.); +#267365 = ORIENTED_EDGE('',*,*,#265468,.T.); +#267366 = ORIENTED_EDGE('',*,*,#263505,.F.); +#267367 = ORIENTED_EDGE('',*,*,#263569,.F.); +#267368 = PLANE('',#267369); +#267369 = AXIS2_PLACEMENT_3D('',#267370,#267371,#267372); +#267370 = CARTESIAN_POINT('',(80.19165,-40.3231,0.)); +#267371 = DIRECTION('',(0.,1.,0.)); +#267372 = DIRECTION('',(1.,0.,0.)); +#267373 = ADVANCED_FACE('',(#267374),#267385,.F.); +#267374 = FACE_BOUND('',#267375,.T.); +#267375 = EDGE_LOOP('',(#267376,#267377,#267383,#267384)); +#267376 = ORIENTED_EDGE('',*,*,#263578,.T.); +#267377 = ORIENTED_EDGE('',*,*,#267378,.T.); +#267378 = EDGE_CURVE('',#263579,#265478,#267379,.T.); +#267379 = LINE('',#267380,#267381); +#267380 = CARTESIAN_POINT('',(85.19165,-136.9231,-4.6E-02)); +#267381 = VECTOR('',#267382,1.); +#267382 = DIRECTION('',(0.,0.,1.)); +#267383 = ORIENTED_EDGE('',*,*,#265477,.F.); +#267384 = ORIENTED_EDGE('',*,*,#267378,.F.); +#267385 = CYLINDRICAL_SURFACE('',#267386,1.6); +#267386 = AXIS2_PLACEMENT_3D('',#267387,#267388,#267389); +#267387 = CARTESIAN_POINT('',(85.19165,-135.3231,-4.6E-02)); +#267388 = DIRECTION('',(-0.,-0.,-1.)); +#267389 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#267390 = ADVANCED_FACE('',(#267391),#267402,.F.); +#267391 = FACE_BOUND('',#267392,.T.); +#267392 = EDGE_LOOP('',(#267393,#267394,#267400,#267401)); +#267393 = ORIENTED_EDGE('',*,*,#263589,.T.); +#267394 = ORIENTED_EDGE('',*,*,#267395,.T.); +#267395 = EDGE_CURVE('',#263590,#265489,#267396,.T.); +#267396 = LINE('',#267397,#267398); +#267397 = CARTESIAN_POINT('',(115.25165,-130.0831,-4.6E-02)); +#267398 = VECTOR('',#267399,1.); +#267399 = DIRECTION('',(0.,0.,1.)); +#267400 = ORIENTED_EDGE('',*,*,#265488,.F.); +#267401 = ORIENTED_EDGE('',*,*,#267395,.F.); +#267402 = CYLINDRICAL_SURFACE('',#267403,0.5); +#267403 = AXIS2_PLACEMENT_3D('',#267404,#267405,#267406); +#267404 = CARTESIAN_POINT('',(115.25165,-129.5831,-4.6E-02)); +#267405 = DIRECTION('',(-0.,-0.,-1.)); +#267406 = DIRECTION('',(-0.,-1.,0.)); +#267407 = ADVANCED_FACE('',(#267408),#267419,.F.); +#267408 = FACE_BOUND('',#267409,.T.); +#267409 = EDGE_LOOP('',(#267410,#267411,#267417,#267418)); +#267410 = ORIENTED_EDGE('',*,*,#263600,.T.); +#267411 = ORIENTED_EDGE('',*,*,#267412,.T.); +#267412 = EDGE_CURVE('',#263601,#265500,#267413,.T.); +#267413 = LINE('',#267414,#267415); +#267414 = CARTESIAN_POINT('',(117.79165,-130.0831,-4.6E-02)); +#267415 = VECTOR('',#267416,1.); +#267416 = DIRECTION('',(0.,0.,1.)); +#267417 = ORIENTED_EDGE('',*,*,#265499,.F.); +#267418 = ORIENTED_EDGE('',*,*,#267412,.F.); +#267419 = CYLINDRICAL_SURFACE('',#267420,0.5); +#267420 = AXIS2_PLACEMENT_3D('',#267421,#267422,#267423); +#267421 = CARTESIAN_POINT('',(117.79165,-129.5831,-4.6E-02)); +#267422 = DIRECTION('',(-0.,-0.,-1.)); +#267423 = DIRECTION('',(-0.,-1.,0.)); +#267424 = ADVANCED_FACE('',(#267425),#267436,.F.); +#267425 = FACE_BOUND('',#267426,.T.); +#267426 = EDGE_LOOP('',(#267427,#267428,#267434,#267435)); +#267427 = ORIENTED_EDGE('',*,*,#263611,.T.); +#267428 = ORIENTED_EDGE('',*,*,#267429,.T.); +#267429 = EDGE_CURVE('',#263612,#265511,#267430,.T.); +#267430 = LINE('',#267431,#267432); +#267431 = CARTESIAN_POINT('',(120.33165,-130.0831,-4.6E-02)); +#267432 = VECTOR('',#267433,1.); +#267433 = DIRECTION('',(0.,0.,1.)); +#267434 = ORIENTED_EDGE('',*,*,#265510,.F.); +#267435 = ORIENTED_EDGE('',*,*,#267429,.F.); +#267436 = CYLINDRICAL_SURFACE('',#267437,0.5); +#267437 = AXIS2_PLACEMENT_3D('',#267438,#267439,#267440); +#267438 = CARTESIAN_POINT('',(120.33165,-129.5831,-4.6E-02)); +#267439 = DIRECTION('',(-0.,-0.,-1.)); +#267440 = DIRECTION('',(-0.,-1.,0.)); +#267441 = ADVANCED_FACE('',(#267442),#267453,.F.); +#267442 = FACE_BOUND('',#267443,.T.); +#267443 = EDGE_LOOP('',(#267444,#267445,#267451,#267452)); +#267444 = ORIENTED_EDGE('',*,*,#263622,.T.); +#267445 = ORIENTED_EDGE('',*,*,#267446,.T.); +#267446 = EDGE_CURVE('',#263623,#265522,#267447,.T.); +#267447 = LINE('',#267448,#267449); +#267448 = CARTESIAN_POINT('',(122.87165,-130.0831,-4.6E-02)); +#267449 = VECTOR('',#267450,1.); +#267450 = DIRECTION('',(0.,0.,1.)); +#267451 = ORIENTED_EDGE('',*,*,#265521,.F.); +#267452 = ORIENTED_EDGE('',*,*,#267446,.F.); +#267453 = CYLINDRICAL_SURFACE('',#267454,0.5); +#267454 = AXIS2_PLACEMENT_3D('',#267455,#267456,#267457); +#267455 = CARTESIAN_POINT('',(122.87165,-129.5831,-4.6E-02)); +#267456 = DIRECTION('',(-0.,-0.,-1.)); +#267457 = DIRECTION('',(-0.,-1.,0.)); +#267458 = ADVANCED_FACE('',(#267459),#267470,.F.); +#267459 = FACE_BOUND('',#267460,.T.); +#267460 = EDGE_LOOP('',(#267461,#267462,#267468,#267469)); +#267461 = ORIENTED_EDGE('',*,*,#263633,.T.); +#267462 = ORIENTED_EDGE('',*,*,#267463,.T.); +#267463 = EDGE_CURVE('',#263634,#265533,#267464,.T.); +#267464 = LINE('',#267465,#267466); +#267465 = CARTESIAN_POINT('',(125.41165,-130.0831,-4.6E-02)); +#267466 = VECTOR('',#267467,1.); +#267467 = DIRECTION('',(0.,0.,1.)); +#267468 = ORIENTED_EDGE('',*,*,#265532,.F.); +#267469 = ORIENTED_EDGE('',*,*,#267463,.F.); +#267470 = CYLINDRICAL_SURFACE('',#267471,0.5); +#267471 = AXIS2_PLACEMENT_3D('',#267472,#267473,#267474); +#267472 = CARTESIAN_POINT('',(125.41165,-129.5831,-4.6E-02)); +#267473 = DIRECTION('',(-0.,-0.,-1.)); +#267474 = DIRECTION('',(-0.,-1.,0.)); +#267475 = ADVANCED_FACE('',(#267476),#267487,.F.); +#267476 = FACE_BOUND('',#267477,.T.); +#267477 = EDGE_LOOP('',(#267478,#267479,#267485,#267486)); +#267478 = ORIENTED_EDGE('',*,*,#263644,.T.); +#267479 = ORIENTED_EDGE('',*,*,#267480,.T.); +#267480 = EDGE_CURVE('',#263645,#265544,#267481,.T.); +#267481 = LINE('',#267482,#267483); +#267482 = CARTESIAN_POINT('',(127.95165,-130.0831,-4.6E-02)); +#267483 = VECTOR('',#267484,1.); +#267484 = DIRECTION('',(0.,0.,1.)); +#267485 = ORIENTED_EDGE('',*,*,#265543,.F.); +#267486 = ORIENTED_EDGE('',*,*,#267480,.F.); +#267487 = CYLINDRICAL_SURFACE('',#267488,0.5); +#267488 = AXIS2_PLACEMENT_3D('',#267489,#267490,#267491); +#267489 = CARTESIAN_POINT('',(127.95165,-129.5831,-4.6E-02)); +#267490 = DIRECTION('',(-0.,-0.,-1.)); +#267491 = DIRECTION('',(-0.,-1.,0.)); +#267492 = ADVANCED_FACE('',(#267493),#267504,.F.); +#267493 = FACE_BOUND('',#267494,.T.); +#267494 = EDGE_LOOP('',(#267495,#267496,#267502,#267503)); +#267495 = ORIENTED_EDGE('',*,*,#263655,.T.); +#267496 = ORIENTED_EDGE('',*,*,#267497,.T.); +#267497 = EDGE_CURVE('',#263656,#265555,#267498,.T.); +#267498 = LINE('',#267499,#267500); +#267499 = CARTESIAN_POINT('',(130.49165,-130.0831,-4.6E-02)); +#267500 = VECTOR('',#267501,1.); +#267501 = DIRECTION('',(0.,0.,1.)); +#267502 = ORIENTED_EDGE('',*,*,#265554,.F.); +#267503 = ORIENTED_EDGE('',*,*,#267497,.F.); +#267504 = CYLINDRICAL_SURFACE('',#267505,0.5); +#267505 = AXIS2_PLACEMENT_3D('',#267506,#267507,#267508); +#267506 = CARTESIAN_POINT('',(130.49165,-129.5831,-4.6E-02)); +#267507 = DIRECTION('',(-0.,-0.,-1.)); +#267508 = DIRECTION('',(-0.,-1.,0.)); +#267509 = ADVANCED_FACE('',(#267510),#267521,.F.); +#267510 = FACE_BOUND('',#267511,.T.); +#267511 = EDGE_LOOP('',(#267512,#267513,#267519,#267520)); +#267512 = ORIENTED_EDGE('',*,*,#263666,.T.); +#267513 = ORIENTED_EDGE('',*,*,#267514,.T.); +#267514 = EDGE_CURVE('',#263667,#265566,#267515,.T.); +#267515 = LINE('',#267516,#267517); +#267516 = CARTESIAN_POINT('',(133.03165,-130.0831,-4.6E-02)); +#267517 = VECTOR('',#267518,1.); +#267518 = DIRECTION('',(0.,0.,1.)); +#267519 = ORIENTED_EDGE('',*,*,#265565,.F.); +#267520 = ORIENTED_EDGE('',*,*,#267514,.F.); +#267521 = CYLINDRICAL_SURFACE('',#267522,0.5); +#267522 = AXIS2_PLACEMENT_3D('',#267523,#267524,#267525); +#267523 = CARTESIAN_POINT('',(133.03165,-129.5831,-4.6E-02)); +#267524 = DIRECTION('',(-0.,-0.,-1.)); +#267525 = DIRECTION('',(-0.,-1.,0.)); +#267526 = ADVANCED_FACE('',(#267527),#267538,.F.); +#267527 = FACE_BOUND('',#267528,.T.); +#267528 = EDGE_LOOP('',(#267529,#267530,#267536,#267537)); +#267529 = ORIENTED_EDGE('',*,*,#263677,.T.); +#267530 = ORIENTED_EDGE('',*,*,#267531,.T.); +#267531 = EDGE_CURVE('',#263678,#265577,#267532,.T.); +#267532 = LINE('',#267533,#267534); +#267533 = CARTESIAN_POINT('',(138.11165,-130.0831,-4.6E-02)); +#267534 = VECTOR('',#267535,1.); +#267535 = DIRECTION('',(0.,0.,1.)); +#267536 = ORIENTED_EDGE('',*,*,#265576,.F.); +#267537 = ORIENTED_EDGE('',*,*,#267531,.F.); +#267538 = CYLINDRICAL_SURFACE('',#267539,0.5); +#267539 = AXIS2_PLACEMENT_3D('',#267540,#267541,#267542); +#267540 = CARTESIAN_POINT('',(138.11165,-129.5831,-4.6E-02)); +#267541 = DIRECTION('',(-0.,-0.,-1.)); +#267542 = DIRECTION('',(-0.,-1.,0.)); +#267543 = ADVANCED_FACE('',(#267544),#267555,.F.); +#267544 = FACE_BOUND('',#267545,.T.); +#267545 = EDGE_LOOP('',(#267546,#267547,#267553,#267554)); +#267546 = ORIENTED_EDGE('',*,*,#263688,.T.); +#267547 = ORIENTED_EDGE('',*,*,#267548,.T.); +#267548 = EDGE_CURVE('',#263689,#265588,#267549,.T.); +#267549 = LINE('',#267550,#267551); +#267550 = CARTESIAN_POINT('',(140.65165,-130.0831,-4.6E-02)); +#267551 = VECTOR('',#267552,1.); +#267552 = DIRECTION('',(0.,0.,1.)); +#267553 = ORIENTED_EDGE('',*,*,#265587,.F.); +#267554 = ORIENTED_EDGE('',*,*,#267548,.F.); +#267555 = CYLINDRICAL_SURFACE('',#267556,0.5); +#267556 = AXIS2_PLACEMENT_3D('',#267557,#267558,#267559); +#267557 = CARTESIAN_POINT('',(140.65165,-129.5831,-4.6E-02)); +#267558 = DIRECTION('',(-0.,-0.,-1.)); +#267559 = DIRECTION('',(-0.,-1.,0.)); +#267560 = ADVANCED_FACE('',(#267561),#267572,.F.); +#267561 = FACE_BOUND('',#267562,.T.); +#267562 = EDGE_LOOP('',(#267563,#267564,#267570,#267571)); +#267563 = ORIENTED_EDGE('',*,*,#263699,.T.); +#267564 = ORIENTED_EDGE('',*,*,#267565,.T.); +#267565 = EDGE_CURVE('',#263700,#265599,#267566,.T.); +#267566 = LINE('',#267567,#267568); +#267567 = CARTESIAN_POINT('',(143.19165,-130.0831,-4.6E-02)); +#267568 = VECTOR('',#267569,1.); +#267569 = DIRECTION('',(0.,0.,1.)); +#267570 = ORIENTED_EDGE('',*,*,#265598,.F.); +#267571 = ORIENTED_EDGE('',*,*,#267565,.F.); +#267572 = CYLINDRICAL_SURFACE('',#267573,0.5); +#267573 = AXIS2_PLACEMENT_3D('',#267574,#267575,#267576); +#267574 = CARTESIAN_POINT('',(143.19165,-129.5831,-4.6E-02)); +#267575 = DIRECTION('',(-0.,-0.,-1.)); +#267576 = DIRECTION('',(-0.,-1.,0.)); +#267577 = ADVANCED_FACE('',(#267578),#267589,.F.); +#267578 = FACE_BOUND('',#267579,.T.); +#267579 = EDGE_LOOP('',(#267580,#267581,#267587,#267588)); +#267580 = ORIENTED_EDGE('',*,*,#263710,.T.); +#267581 = ORIENTED_EDGE('',*,*,#267582,.T.); +#267582 = EDGE_CURVE('',#263711,#265610,#267583,.T.); +#267583 = LINE('',#267584,#267585); +#267584 = CARTESIAN_POINT('',(145.73165,-130.0831,-4.6E-02)); +#267585 = VECTOR('',#267586,1.); +#267586 = DIRECTION('',(0.,0.,1.)); +#267587 = ORIENTED_EDGE('',*,*,#265609,.F.); +#267588 = ORIENTED_EDGE('',*,*,#267582,.F.); +#267589 = CYLINDRICAL_SURFACE('',#267590,0.5); +#267590 = AXIS2_PLACEMENT_3D('',#267591,#267592,#267593); +#267591 = CARTESIAN_POINT('',(145.73165,-129.5831,-4.6E-02)); +#267592 = DIRECTION('',(-0.,-0.,-1.)); +#267593 = DIRECTION('',(-0.,-1.,0.)); +#267594 = ADVANCED_FACE('',(#267595),#267611,.F.); +#267595 = FACE_BOUND('',#267596,.T.); +#267596 = EDGE_LOOP('',(#267597,#267598,#267604,#267605)); +#267597 = ORIENTED_EDGE('',*,*,#263721,.T.); +#267598 = ORIENTED_EDGE('',*,*,#267599,.T.); +#267599 = EDGE_CURVE('',#263724,#265623,#267600,.T.); +#267600 = LINE('',#267601,#267602); +#267601 = CARTESIAN_POINT('',(159.525,-134.185,-4.6E-02)); +#267602 = VECTOR('',#267603,1.); +#267603 = DIRECTION('',(0.,0.,1.)); +#267604 = ORIENTED_EDGE('',*,*,#265620,.F.); +#267605 = ORIENTED_EDGE('',*,*,#267606,.F.); +#267606 = EDGE_CURVE('',#263722,#265621,#267607,.T.); +#267607 = LINE('',#267608,#267609); +#267608 = CARTESIAN_POINT('',(160.125,-134.185,-4.6E-02)); +#267609 = VECTOR('',#267610,1.); +#267610 = DIRECTION('',(0.,0.,1.)); +#267611 = CYLINDRICAL_SURFACE('',#267612,0.3); +#267612 = AXIS2_PLACEMENT_3D('',#267613,#267614,#267615); +#267613 = CARTESIAN_POINT('',(159.825,-134.185,-4.6E-02)); +#267614 = DIRECTION('',(-0.,-0.,-1.)); +#267615 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#267616 = ADVANCED_FACE('',(#267617),#267628,.T.); +#267617 = FACE_BOUND('',#267618,.T.); +#267618 = EDGE_LOOP('',(#267619,#267620,#267621,#267622)); +#267619 = ORIENTED_EDGE('',*,*,#263749,.T.); +#267620 = ORIENTED_EDGE('',*,*,#267606,.T.); +#267621 = ORIENTED_EDGE('',*,*,#265648,.F.); +#267622 = ORIENTED_EDGE('',*,*,#267623,.F.); +#267623 = EDGE_CURVE('',#263741,#265640,#267624,.T.); +#267624 = LINE('',#267625,#267626); +#267625 = CARTESIAN_POINT('',(160.125,-133.385,-4.6E-02)); +#267626 = VECTOR('',#267627,1.); +#267627 = DIRECTION('',(0.,0.,1.)); +#267628 = PLANE('',#267629); +#267629 = AXIS2_PLACEMENT_3D('',#267630,#267631,#267632); +#267630 = CARTESIAN_POINT('',(160.125,-134.185,-4.6E-02)); +#267631 = DIRECTION('',(-1.,0.,0.)); +#267632 = DIRECTION('',(0.,1.,0.)); +#267633 = ADVANCED_FACE('',(#267634),#267645,.F.); +#267634 = FACE_BOUND('',#267635,.T.); +#267635 = EDGE_LOOP('',(#267636,#267637,#267638,#267639)); +#267636 = ORIENTED_EDGE('',*,*,#263740,.T.); +#267637 = ORIENTED_EDGE('',*,*,#267623,.T.); +#267638 = ORIENTED_EDGE('',*,*,#265639,.F.); +#267639 = ORIENTED_EDGE('',*,*,#267640,.F.); +#267640 = EDGE_CURVE('',#263733,#265632,#267641,.T.); +#267641 = LINE('',#267642,#267643); +#267642 = CARTESIAN_POINT('',(159.525,-133.385,-4.6E-02)); +#267643 = VECTOR('',#267644,1.); +#267644 = DIRECTION('',(0.,0.,1.)); +#267645 = CYLINDRICAL_SURFACE('',#267646,0.3); +#267646 = AXIS2_PLACEMENT_3D('',#267647,#267648,#267649); +#267647 = CARTESIAN_POINT('',(159.825,-133.385,-4.6E-02)); +#267648 = DIRECTION('',(-0.,-0.,-1.)); +#267649 = DIRECTION('',(1.,9.473903143469E-14,-0.)); +#267650 = ADVANCED_FACE('',(#267651),#267657,.T.); +#267651 = FACE_BOUND('',#267652,.T.); +#267652 = EDGE_LOOP('',(#267653,#267654,#267655,#267656)); +#267653 = ORIENTED_EDGE('',*,*,#263732,.T.); +#267654 = ORIENTED_EDGE('',*,*,#267640,.T.); +#267655 = ORIENTED_EDGE('',*,*,#265631,.F.); +#267656 = ORIENTED_EDGE('',*,*,#267599,.F.); +#267657 = PLANE('',#267658); +#267658 = AXIS2_PLACEMENT_3D('',#267659,#267660,#267661); +#267659 = CARTESIAN_POINT('',(159.525,-133.385,-4.6E-02)); +#267660 = DIRECTION('',(1.,0.,-0.)); +#267661 = DIRECTION('',(0.,-1.,0.)); +#267662 = ADVANCED_FACE('',(#267663),#267674,.F.); +#267663 = FACE_BOUND('',#267664,.T.); +#267664 = EDGE_LOOP('',(#267665,#267666,#267672,#267673)); +#267665 = ORIENTED_EDGE('',*,*,#263757,.T.); +#267666 = ORIENTED_EDGE('',*,*,#267667,.T.); +#267667 = EDGE_CURVE('',#263758,#265657,#267668,.T.); +#267668 = LINE('',#267669,#267670); +#267669 = CARTESIAN_POINT('',(148.27165,-130.0831,-4.6E-02)); +#267670 = VECTOR('',#267671,1.); +#267671 = DIRECTION('',(0.,0.,1.)); +#267672 = ORIENTED_EDGE('',*,*,#265656,.F.); +#267673 = ORIENTED_EDGE('',*,*,#267667,.F.); +#267674 = CYLINDRICAL_SURFACE('',#267675,0.5); +#267675 = AXIS2_PLACEMENT_3D('',#267676,#267677,#267678); +#267676 = CARTESIAN_POINT('',(148.27165,-129.5831,-4.6E-02)); +#267677 = DIRECTION('',(-0.,-0.,-1.)); +#267678 = DIRECTION('',(-0.,-1.,0.)); +#267679 = ADVANCED_FACE('',(#267680),#267691,.F.); +#267680 = FACE_BOUND('',#267681,.T.); +#267681 = EDGE_LOOP('',(#267682,#267683,#267689,#267690)); +#267682 = ORIENTED_EDGE('',*,*,#263768,.T.); +#267683 = ORIENTED_EDGE('',*,*,#267684,.T.); +#267684 = EDGE_CURVE('',#263769,#265668,#267685,.T.); +#267685 = LINE('',#267686,#267687); +#267686 = CARTESIAN_POINT('',(150.81165,-130.0831,-4.6E-02)); +#267687 = VECTOR('',#267688,1.); +#267688 = DIRECTION('',(0.,0.,1.)); +#267689 = ORIENTED_EDGE('',*,*,#265667,.F.); +#267690 = ORIENTED_EDGE('',*,*,#267684,.F.); +#267691 = CYLINDRICAL_SURFACE('',#267692,0.5); +#267692 = AXIS2_PLACEMENT_3D('',#267693,#267694,#267695); +#267693 = CARTESIAN_POINT('',(150.81165,-129.5831,-4.6E-02)); +#267694 = DIRECTION('',(-0.,-0.,-1.)); +#267695 = DIRECTION('',(-0.,-1.,0.)); +#267696 = ADVANCED_FACE('',(#267697),#267713,.F.); +#267697 = FACE_BOUND('',#267698,.T.); +#267698 = EDGE_LOOP('',(#267699,#267700,#267706,#267707)); +#267699 = ORIENTED_EDGE('',*,*,#263779,.T.); +#267700 = ORIENTED_EDGE('',*,*,#267701,.T.); +#267701 = EDGE_CURVE('',#263782,#265681,#267702,.T.); +#267702 = LINE('',#267703,#267704); +#267703 = CARTESIAN_POINT('',(159.525,-131.155,-4.6E-02)); +#267704 = VECTOR('',#267705,1.); +#267705 = DIRECTION('',(0.,0.,1.)); +#267706 = ORIENTED_EDGE('',*,*,#265678,.F.); +#267707 = ORIENTED_EDGE('',*,*,#267708,.F.); +#267708 = EDGE_CURVE('',#263780,#265679,#267709,.T.); +#267709 = LINE('',#267710,#267711); +#267710 = CARTESIAN_POINT('',(160.125,-131.155,-4.6E-02)); +#267711 = VECTOR('',#267712,1.); +#267712 = DIRECTION('',(0.,0.,1.)); +#267713 = CYLINDRICAL_SURFACE('',#267714,0.3); +#267714 = AXIS2_PLACEMENT_3D('',#267715,#267716,#267717); +#267715 = CARTESIAN_POINT('',(159.825,-131.155,-4.6E-02)); +#267716 = DIRECTION('',(-0.,-0.,-1.)); +#267717 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#267718 = ADVANCED_FACE('',(#267719),#267730,.T.); +#267719 = FACE_BOUND('',#267720,.T.); +#267720 = EDGE_LOOP('',(#267721,#267722,#267723,#267724)); +#267721 = ORIENTED_EDGE('',*,*,#263807,.T.); +#267722 = ORIENTED_EDGE('',*,*,#267708,.T.); +#267723 = ORIENTED_EDGE('',*,*,#265706,.F.); +#267724 = ORIENTED_EDGE('',*,*,#267725,.F.); +#267725 = EDGE_CURVE('',#263799,#265698,#267726,.T.); +#267726 = LINE('',#267727,#267728); +#267727 = CARTESIAN_POINT('',(160.125,-129.655,-4.6E-02)); +#267728 = VECTOR('',#267729,1.); +#267729 = DIRECTION('',(0.,0.,1.)); +#267730 = PLANE('',#267731); +#267731 = AXIS2_PLACEMENT_3D('',#267732,#267733,#267734); +#267732 = CARTESIAN_POINT('',(160.125,-131.155,-4.6E-02)); +#267733 = DIRECTION('',(-1.,0.,0.)); +#267734 = DIRECTION('',(0.,1.,0.)); +#267735 = ADVANCED_FACE('',(#267736),#267747,.F.); +#267736 = FACE_BOUND('',#267737,.T.); +#267737 = EDGE_LOOP('',(#267738,#267739,#267740,#267741)); +#267738 = ORIENTED_EDGE('',*,*,#263798,.T.); +#267739 = ORIENTED_EDGE('',*,*,#267725,.T.); +#267740 = ORIENTED_EDGE('',*,*,#265697,.F.); +#267741 = ORIENTED_EDGE('',*,*,#267742,.F.); +#267742 = EDGE_CURVE('',#263791,#265690,#267743,.T.); +#267743 = LINE('',#267744,#267745); +#267744 = CARTESIAN_POINT('',(159.525,-129.655,-4.6E-02)); +#267745 = VECTOR('',#267746,1.); +#267746 = DIRECTION('',(0.,0.,1.)); +#267747 = CYLINDRICAL_SURFACE('',#267748,0.3); +#267748 = AXIS2_PLACEMENT_3D('',#267749,#267750,#267751); +#267749 = CARTESIAN_POINT('',(159.825,-129.655,-4.6E-02)); +#267750 = DIRECTION('',(-0.,-0.,-1.)); +#267751 = DIRECTION('',(1.,-9.473903143469E-14,0.)); +#267752 = ADVANCED_FACE('',(#267753),#267759,.T.); +#267753 = FACE_BOUND('',#267754,.T.); +#267754 = EDGE_LOOP('',(#267755,#267756,#267757,#267758)); +#267755 = ORIENTED_EDGE('',*,*,#263790,.T.); +#267756 = ORIENTED_EDGE('',*,*,#267742,.T.); +#267757 = ORIENTED_EDGE('',*,*,#265689,.F.); +#267758 = ORIENTED_EDGE('',*,*,#267701,.F.); +#267759 = PLANE('',#267760); +#267760 = AXIS2_PLACEMENT_3D('',#267761,#267762,#267763); +#267761 = CARTESIAN_POINT('',(159.525,-129.655,-4.6E-02)); +#267762 = DIRECTION('',(1.,0.,-0.)); +#267763 = DIRECTION('',(0.,-1.,0.)); +#267764 = ADVANCED_FACE('',(#267765),#267776,.F.); +#267765 = FACE_BOUND('',#267766,.T.); +#267766 = EDGE_LOOP('',(#267767,#267768,#267774,#267775)); +#267767 = ORIENTED_EDGE('',*,*,#263815,.T.); +#267768 = ORIENTED_EDGE('',*,*,#267769,.T.); +#267769 = EDGE_CURVE('',#263816,#265715,#267770,.T.); +#267770 = LINE('',#267771,#267772); +#267771 = CARTESIAN_POINT('',(161.175,-130.975,-4.6E-02)); +#267772 = VECTOR('',#267773,1.); +#267773 = DIRECTION('',(0.,0.,1.)); +#267774 = ORIENTED_EDGE('',*,*,#265714,.F.); +#267775 = ORIENTED_EDGE('',*,*,#267769,.F.); +#267776 = CYLINDRICAL_SURFACE('',#267777,0.2); +#267777 = AXIS2_PLACEMENT_3D('',#267778,#267779,#267780); +#267778 = CARTESIAN_POINT('',(161.175,-130.775,-4.6E-02)); +#267779 = DIRECTION('',(-0.,-0.,-1.)); +#267780 = DIRECTION('',(-0.,-1.,0.)); +#267781 = ADVANCED_FACE('',(#267782),#267793,.F.); +#267782 = FACE_BOUND('',#267783,.T.); +#267783 = EDGE_LOOP('',(#267784,#267785,#267791,#267792)); +#267784 = ORIENTED_EDGE('',*,*,#263826,.T.); +#267785 = ORIENTED_EDGE('',*,*,#267786,.T.); +#267786 = EDGE_CURVE('',#263827,#265726,#267787,.T.); +#267787 = LINE('',#267788,#267789); +#267788 = CARTESIAN_POINT('',(162.025,-130.975,-4.6E-02)); +#267789 = VECTOR('',#267790,1.); +#267790 = DIRECTION('',(0.,0.,1.)); +#267791 = ORIENTED_EDGE('',*,*,#265725,.F.); +#267792 = ORIENTED_EDGE('',*,*,#267786,.F.); +#267793 = CYLINDRICAL_SURFACE('',#267794,0.2); +#267794 = AXIS2_PLACEMENT_3D('',#267795,#267796,#267797); +#267795 = CARTESIAN_POINT('',(162.025,-130.775,-4.6E-02)); +#267796 = DIRECTION('',(-0.,0.,-1.)); +#267797 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#267798 = ADVANCED_FACE('',(#267799),#267810,.F.); +#267799 = FACE_BOUND('',#267800,.T.); +#267800 = EDGE_LOOP('',(#267801,#267802,#267808,#267809)); +#267801 = ORIENTED_EDGE('',*,*,#263837,.T.); +#267802 = ORIENTED_EDGE('',*,*,#267803,.T.); +#267803 = EDGE_CURVE('',#263838,#265737,#267804,.T.); +#267804 = LINE('',#267805,#267806); +#267805 = CARTESIAN_POINT('',(162.875,-130.975,-4.6E-02)); +#267806 = VECTOR('',#267807,1.); +#267807 = DIRECTION('',(0.,0.,1.)); +#267808 = ORIENTED_EDGE('',*,*,#265736,.F.); +#267809 = ORIENTED_EDGE('',*,*,#267803,.F.); +#267810 = CYLINDRICAL_SURFACE('',#267811,0.2); +#267811 = AXIS2_PLACEMENT_3D('',#267812,#267813,#267814); +#267812 = CARTESIAN_POINT('',(162.875,-130.775,-4.6E-02)); +#267813 = DIRECTION('',(-0.,-0.,-1.)); +#267814 = DIRECTION('',(-0.,-1.,0.)); +#267815 = ADVANCED_FACE('',(#267816),#267827,.F.); +#267816 = FACE_BOUND('',#267817,.T.); +#267817 = EDGE_LOOP('',(#267818,#267819,#267825,#267826)); +#267818 = ORIENTED_EDGE('',*,*,#263848,.T.); +#267819 = ORIENTED_EDGE('',*,*,#267820,.T.); +#267820 = EDGE_CURVE('',#263849,#265748,#267821,.T.); +#267821 = LINE('',#267822,#267823); +#267822 = CARTESIAN_POINT('',(163.725,-130.975,-4.6E-02)); +#267823 = VECTOR('',#267824,1.); +#267824 = DIRECTION('',(0.,0.,1.)); +#267825 = ORIENTED_EDGE('',*,*,#265747,.F.); +#267826 = ORIENTED_EDGE('',*,*,#267820,.F.); +#267827 = CYLINDRICAL_SURFACE('',#267828,0.2); +#267828 = AXIS2_PLACEMENT_3D('',#267829,#267830,#267831); +#267829 = CARTESIAN_POINT('',(163.725,-130.775,-4.6E-02)); +#267830 = DIRECTION('',(-0.,-0.,-1.)); +#267831 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#267832 = ADVANCED_FACE('',(#267833),#267844,.F.); +#267833 = FACE_BOUND('',#267834,.T.); +#267834 = EDGE_LOOP('',(#267835,#267836,#267842,#267843)); +#267835 = ORIENTED_EDGE('',*,*,#263859,.T.); +#267836 = ORIENTED_EDGE('',*,*,#267837,.T.); +#267837 = EDGE_CURVE('',#263860,#265759,#267838,.T.); +#267838 = LINE('',#267839,#267840); +#267839 = CARTESIAN_POINT('',(161.175,-129.625,-4.6E-02)); +#267840 = VECTOR('',#267841,1.); +#267841 = DIRECTION('',(0.,0.,1.)); +#267842 = ORIENTED_EDGE('',*,*,#265758,.F.); +#267843 = ORIENTED_EDGE('',*,*,#267837,.F.); +#267844 = CYLINDRICAL_SURFACE('',#267845,0.2); +#267845 = AXIS2_PLACEMENT_3D('',#267846,#267847,#267848); +#267846 = CARTESIAN_POINT('',(161.175,-129.425,-4.6E-02)); +#267847 = DIRECTION('',(-0.,-0.,-1.)); +#267848 = DIRECTION('',(-0.,-1.,0.)); +#267849 = ADVANCED_FACE('',(#267850),#267861,.F.); +#267850 = FACE_BOUND('',#267851,.T.); +#267851 = EDGE_LOOP('',(#267852,#267853,#267859,#267860)); +#267852 = ORIENTED_EDGE('',*,*,#263870,.T.); +#267853 = ORIENTED_EDGE('',*,*,#267854,.T.); +#267854 = EDGE_CURVE('',#263871,#265770,#267855,.T.); +#267855 = LINE('',#267856,#267857); +#267856 = CARTESIAN_POINT('',(162.025,-129.625,-4.6E-02)); +#267857 = VECTOR('',#267858,1.); +#267858 = DIRECTION('',(0.,0.,1.)); +#267859 = ORIENTED_EDGE('',*,*,#265769,.F.); +#267860 = ORIENTED_EDGE('',*,*,#267854,.F.); +#267861 = CYLINDRICAL_SURFACE('',#267862,0.2); +#267862 = AXIS2_PLACEMENT_3D('',#267863,#267864,#267865); +#267863 = CARTESIAN_POINT('',(162.025,-129.425,-4.6E-02)); +#267864 = DIRECTION('',(-0.,0.,-1.)); +#267865 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#267866 = ADVANCED_FACE('',(#267867),#267878,.F.); +#267867 = FACE_BOUND('',#267868,.T.); +#267868 = EDGE_LOOP('',(#267869,#267870,#267876,#267877)); +#267869 = ORIENTED_EDGE('',*,*,#263881,.T.); +#267870 = ORIENTED_EDGE('',*,*,#267871,.T.); +#267871 = EDGE_CURVE('',#263882,#265781,#267872,.T.); +#267872 = LINE('',#267873,#267874); +#267873 = CARTESIAN_POINT('',(162.875,-129.625,-4.6E-02)); +#267874 = VECTOR('',#267875,1.); +#267875 = DIRECTION('',(0.,0.,1.)); +#267876 = ORIENTED_EDGE('',*,*,#265780,.F.); +#267877 = ORIENTED_EDGE('',*,*,#267871,.F.); +#267878 = CYLINDRICAL_SURFACE('',#267879,0.2); +#267879 = AXIS2_PLACEMENT_3D('',#267880,#267881,#267882); +#267880 = CARTESIAN_POINT('',(162.875,-129.425,-4.6E-02)); +#267881 = DIRECTION('',(-0.,-0.,-1.)); +#267882 = DIRECTION('',(-0.,-1.,0.)); +#267883 = ADVANCED_FACE('',(#267884),#267895,.F.); +#267884 = FACE_BOUND('',#267885,.T.); +#267885 = EDGE_LOOP('',(#267886,#267887,#267893,#267894)); +#267886 = ORIENTED_EDGE('',*,*,#263892,.T.); +#267887 = ORIENTED_EDGE('',*,*,#267888,.T.); +#267888 = EDGE_CURVE('',#263893,#265792,#267889,.T.); +#267889 = LINE('',#267890,#267891); +#267890 = CARTESIAN_POINT('',(163.725,-129.625,-4.6E-02)); +#267891 = VECTOR('',#267892,1.); +#267892 = DIRECTION('',(0.,0.,1.)); +#267893 = ORIENTED_EDGE('',*,*,#265791,.F.); +#267894 = ORIENTED_EDGE('',*,*,#267888,.F.); +#267895 = CYLINDRICAL_SURFACE('',#267896,0.2); +#267896 = AXIS2_PLACEMENT_3D('',#267897,#267898,#267899); +#267897 = CARTESIAN_POINT('',(163.725,-129.425,-4.6E-02)); +#267898 = DIRECTION('',(-0.,-0.,-1.)); +#267899 = DIRECTION('',(-1.42108547152E-13,-1.,0.)); +#267900 = ADVANCED_FACE('',(#267901),#267917,.F.); +#267901 = FACE_BOUND('',#267902,.T.); +#267902 = EDGE_LOOP('',(#267903,#267904,#267910,#267911)); +#267903 = ORIENTED_EDGE('',*,*,#263903,.T.); +#267904 = ORIENTED_EDGE('',*,*,#267905,.T.); +#267905 = EDGE_CURVE('',#263906,#265805,#267906,.T.); +#267906 = LINE('',#267907,#267908); +#267907 = CARTESIAN_POINT('',(168.175,-134.185,-4.6E-02)); +#267908 = VECTOR('',#267909,1.); +#267909 = DIRECTION('',(0.,0.,1.)); +#267910 = ORIENTED_EDGE('',*,*,#265802,.F.); +#267911 = ORIENTED_EDGE('',*,*,#267912,.F.); +#267912 = EDGE_CURVE('',#263904,#265803,#267913,.T.); +#267913 = LINE('',#267914,#267915); +#267914 = CARTESIAN_POINT('',(168.775,-134.185,-4.6E-02)); +#267915 = VECTOR('',#267916,1.); +#267916 = DIRECTION('',(0.,0.,1.)); +#267917 = CYLINDRICAL_SURFACE('',#267918,0.3); +#267918 = AXIS2_PLACEMENT_3D('',#267919,#267920,#267921); +#267919 = CARTESIAN_POINT('',(168.475,-134.185,-4.6E-02)); +#267920 = DIRECTION('',(-0.,-0.,-1.)); +#267921 = DIRECTION('',(-1.,0.,-0.)); +#267922 = ADVANCED_FACE('',(#267923),#267934,.T.); +#267923 = FACE_BOUND('',#267924,.T.); +#267924 = EDGE_LOOP('',(#267925,#267926,#267927,#267928)); +#267925 = ORIENTED_EDGE('',*,*,#263931,.T.); +#267926 = ORIENTED_EDGE('',*,*,#267912,.T.); +#267927 = ORIENTED_EDGE('',*,*,#265830,.F.); +#267928 = ORIENTED_EDGE('',*,*,#267929,.F.); +#267929 = EDGE_CURVE('',#263923,#265822,#267930,.T.); +#267930 = LINE('',#267931,#267932); +#267931 = CARTESIAN_POINT('',(168.775,-133.385,-4.6E-02)); +#267932 = VECTOR('',#267933,1.); +#267933 = DIRECTION('',(0.,0.,1.)); +#267934 = PLANE('',#267935); +#267935 = AXIS2_PLACEMENT_3D('',#267936,#267937,#267938); +#267936 = CARTESIAN_POINT('',(168.775,-134.185,-4.6E-02)); +#267937 = DIRECTION('',(-1.,0.,0.)); +#267938 = DIRECTION('',(0.,1.,0.)); +#267939 = ADVANCED_FACE('',(#267940),#267951,.F.); +#267940 = FACE_BOUND('',#267941,.T.); +#267941 = EDGE_LOOP('',(#267942,#267943,#267944,#267945)); +#267942 = ORIENTED_EDGE('',*,*,#263922,.T.); +#267943 = ORIENTED_EDGE('',*,*,#267929,.T.); +#267944 = ORIENTED_EDGE('',*,*,#265821,.F.); +#267945 = ORIENTED_EDGE('',*,*,#267946,.F.); +#267946 = EDGE_CURVE('',#263915,#265814,#267947,.T.); +#267947 = LINE('',#267948,#267949); +#267948 = CARTESIAN_POINT('',(168.175,-133.385,-4.6E-02)); +#267949 = VECTOR('',#267950,1.); +#267950 = DIRECTION('',(0.,0.,1.)); +#267951 = CYLINDRICAL_SURFACE('',#267952,0.3); +#267952 = AXIS2_PLACEMENT_3D('',#267953,#267954,#267955); +#267953 = CARTESIAN_POINT('',(168.475,-133.385,-4.6E-02)); +#267954 = DIRECTION('',(-0.,-0.,-1.)); +#267955 = DIRECTION('',(1.,9.473903143468E-14,-0.)); +#267956 = ADVANCED_FACE('',(#267957),#267963,.T.); +#267957 = FACE_BOUND('',#267958,.T.); +#267958 = EDGE_LOOP('',(#267959,#267960,#267961,#267962)); +#267959 = ORIENTED_EDGE('',*,*,#263914,.T.); +#267960 = ORIENTED_EDGE('',*,*,#267946,.T.); +#267961 = ORIENTED_EDGE('',*,*,#265813,.F.); +#267962 = ORIENTED_EDGE('',*,*,#267905,.F.); +#267963 = PLANE('',#267964); +#267964 = AXIS2_PLACEMENT_3D('',#267965,#267966,#267967); +#267965 = CARTESIAN_POINT('',(168.175,-133.385,-4.6E-02)); +#267966 = DIRECTION('',(1.,0.,-0.)); +#267967 = DIRECTION('',(0.,-1.,0.)); +#267968 = ADVANCED_FACE('',(#267969),#267980,.F.); +#267969 = FACE_BOUND('',#267970,.T.); +#267970 = EDGE_LOOP('',(#267971,#267972,#267978,#267979)); +#267971 = ORIENTED_EDGE('',*,*,#263939,.T.); +#267972 = ORIENTED_EDGE('',*,*,#267973,.T.); +#267973 = EDGE_CURVE('',#263940,#265839,#267974,.T.); +#267974 = LINE('',#267975,#267976); +#267975 = CARTESIAN_POINT('',(172.69165,-134.4731,-4.6E-02)); +#267976 = VECTOR('',#267977,1.); +#267977 = DIRECTION('',(0.,0.,1.)); +#267978 = ORIENTED_EDGE('',*,*,#265838,.F.); +#267979 = ORIENTED_EDGE('',*,*,#267973,.F.); +#267980 = CYLINDRICAL_SURFACE('',#267981,0.65); +#267981 = AXIS2_PLACEMENT_3D('',#267982,#267983,#267984); +#267982 = CARTESIAN_POINT('',(172.69165,-133.8231,-4.6E-02)); +#267983 = DIRECTION('',(-0.,0.,-1.)); +#267984 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#267985 = ADVANCED_FACE('',(#267986),#267997,.F.); +#267986 = FACE_BOUND('',#267987,.T.); +#267987 = EDGE_LOOP('',(#267988,#267989,#267995,#267996)); +#267988 = ORIENTED_EDGE('',*,*,#263950,.T.); +#267989 = ORIENTED_EDGE('',*,*,#267990,.T.); +#267990 = EDGE_CURVE('',#263951,#265850,#267991,.T.); +#267991 = LINE('',#267992,#267993); +#267992 = CARTESIAN_POINT('',(177.69165,-134.4731,-4.6E-02)); +#267993 = VECTOR('',#267994,1.); +#267994 = DIRECTION('',(0.,0.,1.)); +#267995 = ORIENTED_EDGE('',*,*,#265849,.F.); +#267996 = ORIENTED_EDGE('',*,*,#267990,.F.); +#267997 = CYLINDRICAL_SURFACE('',#267998,0.65); +#267998 = AXIS2_PLACEMENT_3D('',#267999,#268000,#268001); +#267999 = CARTESIAN_POINT('',(177.69165,-133.8231,-4.6E-02)); +#268000 = DIRECTION('',(-0.,0.,-1.)); +#268001 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268002 = ADVANCED_FACE('',(#268003),#268014,.F.); +#268003 = FACE_BOUND('',#268004,.T.); +#268004 = EDGE_LOOP('',(#268005,#268006,#268012,#268013)); +#268005 = ORIENTED_EDGE('',*,*,#263961,.T.); +#268006 = ORIENTED_EDGE('',*,*,#268007,.T.); +#268007 = EDGE_CURVE('',#263962,#265861,#268008,.T.); +#268008 = LINE('',#268009,#268010); +#268009 = CARTESIAN_POINT('',(164.575,-130.975,-4.6E-02)); +#268010 = VECTOR('',#268011,1.); +#268011 = DIRECTION('',(0.,0.,1.)); +#268012 = ORIENTED_EDGE('',*,*,#265860,.F.); +#268013 = ORIENTED_EDGE('',*,*,#268007,.F.); +#268014 = CYLINDRICAL_SURFACE('',#268015,0.2); +#268015 = AXIS2_PLACEMENT_3D('',#268016,#268017,#268018); +#268016 = CARTESIAN_POINT('',(164.575,-130.775,-4.6E-02)); +#268017 = DIRECTION('',(-0.,-0.,-1.)); +#268018 = DIRECTION('',(-0.,-1.,0.)); +#268019 = ADVANCED_FACE('',(#268020),#268031,.F.); +#268020 = FACE_BOUND('',#268021,.T.); +#268021 = EDGE_LOOP('',(#268022,#268023,#268029,#268030)); +#268022 = ORIENTED_EDGE('',*,*,#263972,.T.); +#268023 = ORIENTED_EDGE('',*,*,#268024,.T.); +#268024 = EDGE_CURVE('',#263973,#265872,#268025,.T.); +#268025 = LINE('',#268026,#268027); +#268026 = CARTESIAN_POINT('',(165.425,-130.975,-4.6E-02)); +#268027 = VECTOR('',#268028,1.); +#268028 = DIRECTION('',(0.,0.,1.)); +#268029 = ORIENTED_EDGE('',*,*,#265871,.F.); +#268030 = ORIENTED_EDGE('',*,*,#268024,.F.); +#268031 = CYLINDRICAL_SURFACE('',#268032,0.2); +#268032 = AXIS2_PLACEMENT_3D('',#268033,#268034,#268035); +#268033 = CARTESIAN_POINT('',(165.425,-130.775,-4.6E-02)); +#268034 = DIRECTION('',(-0.,-0.,-1.)); +#268035 = DIRECTION('',(-0.,-1.,0.)); +#268036 = ADVANCED_FACE('',(#268037),#268048,.F.); +#268037 = FACE_BOUND('',#268038,.T.); +#268038 = EDGE_LOOP('',(#268039,#268040,#268046,#268047)); +#268039 = ORIENTED_EDGE('',*,*,#263983,.T.); +#268040 = ORIENTED_EDGE('',*,*,#268041,.T.); +#268041 = EDGE_CURVE('',#263984,#265883,#268042,.T.); +#268042 = LINE('',#268043,#268044); +#268043 = CARTESIAN_POINT('',(166.275,-130.975,-4.6E-02)); +#268044 = VECTOR('',#268045,1.); +#268045 = DIRECTION('',(0.,0.,1.)); +#268046 = ORIENTED_EDGE('',*,*,#265882,.F.); +#268047 = ORIENTED_EDGE('',*,*,#268041,.F.); +#268048 = CYLINDRICAL_SURFACE('',#268049,0.2); +#268049 = AXIS2_PLACEMENT_3D('',#268050,#268051,#268052); +#268050 = CARTESIAN_POINT('',(166.275,-130.775,-4.6E-02)); +#268051 = DIRECTION('',(-0.,0.,-1.)); +#268052 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#268053 = ADVANCED_FACE('',(#268054),#268065,.F.); +#268054 = FACE_BOUND('',#268055,.T.); +#268055 = EDGE_LOOP('',(#268056,#268057,#268063,#268064)); +#268056 = ORIENTED_EDGE('',*,*,#263994,.T.); +#268057 = ORIENTED_EDGE('',*,*,#268058,.T.); +#268058 = EDGE_CURVE('',#263995,#265894,#268059,.T.); +#268059 = LINE('',#268060,#268061); +#268060 = CARTESIAN_POINT('',(167.125,-130.975,-4.6E-02)); +#268061 = VECTOR('',#268062,1.); +#268062 = DIRECTION('',(0.,0.,1.)); +#268063 = ORIENTED_EDGE('',*,*,#265893,.F.); +#268064 = ORIENTED_EDGE('',*,*,#268058,.F.); +#268065 = CYLINDRICAL_SURFACE('',#268066,0.2); +#268066 = AXIS2_PLACEMENT_3D('',#268067,#268068,#268069); +#268067 = CARTESIAN_POINT('',(167.125,-130.775,-4.6E-02)); +#268068 = DIRECTION('',(-0.,-0.,-1.)); +#268069 = DIRECTION('',(-0.,-1.,0.)); +#268070 = ADVANCED_FACE('',(#268071),#268087,.F.); +#268071 = FACE_BOUND('',#268072,.T.); +#268072 = EDGE_LOOP('',(#268073,#268074,#268080,#268081)); +#268073 = ORIENTED_EDGE('',*,*,#264005,.T.); +#268074 = ORIENTED_EDGE('',*,*,#268075,.T.); +#268075 = EDGE_CURVE('',#264008,#265907,#268076,.T.); +#268076 = LINE('',#268077,#268078); +#268077 = CARTESIAN_POINT('',(168.175,-131.155,-4.6E-02)); +#268078 = VECTOR('',#268079,1.); +#268079 = DIRECTION('',(0.,0.,1.)); +#268080 = ORIENTED_EDGE('',*,*,#265904,.F.); +#268081 = ORIENTED_EDGE('',*,*,#268082,.F.); +#268082 = EDGE_CURVE('',#264006,#265905,#268083,.T.); +#268083 = LINE('',#268084,#268085); +#268084 = CARTESIAN_POINT('',(168.775,-131.155,-4.6E-02)); +#268085 = VECTOR('',#268086,1.); +#268086 = DIRECTION('',(0.,0.,1.)); +#268087 = CYLINDRICAL_SURFACE('',#268088,0.3); +#268088 = AXIS2_PLACEMENT_3D('',#268089,#268090,#268091); +#268089 = CARTESIAN_POINT('',(168.475,-131.155,-4.6E-02)); +#268090 = DIRECTION('',(-0.,-0.,-1.)); +#268091 = DIRECTION('',(-1.,0.,-0.)); +#268092 = ADVANCED_FACE('',(#268093),#268104,.T.); +#268093 = FACE_BOUND('',#268094,.T.); +#268094 = EDGE_LOOP('',(#268095,#268096,#268097,#268098)); +#268095 = ORIENTED_EDGE('',*,*,#264033,.T.); +#268096 = ORIENTED_EDGE('',*,*,#268082,.T.); +#268097 = ORIENTED_EDGE('',*,*,#265932,.F.); +#268098 = ORIENTED_EDGE('',*,*,#268099,.F.); +#268099 = EDGE_CURVE('',#264025,#265924,#268100,.T.); +#268100 = LINE('',#268101,#268102); +#268101 = CARTESIAN_POINT('',(168.775,-129.655,-4.6E-02)); +#268102 = VECTOR('',#268103,1.); +#268103 = DIRECTION('',(0.,0.,1.)); +#268104 = PLANE('',#268105); +#268105 = AXIS2_PLACEMENT_3D('',#268106,#268107,#268108); +#268106 = CARTESIAN_POINT('',(168.775,-131.155,-4.6E-02)); +#268107 = DIRECTION('',(-1.,0.,0.)); +#268108 = DIRECTION('',(0.,1.,0.)); +#268109 = ADVANCED_FACE('',(#268110),#268121,.F.); +#268110 = FACE_BOUND('',#268111,.T.); +#268111 = EDGE_LOOP('',(#268112,#268113,#268114,#268115)); +#268112 = ORIENTED_EDGE('',*,*,#264024,.T.); +#268113 = ORIENTED_EDGE('',*,*,#268099,.T.); +#268114 = ORIENTED_EDGE('',*,*,#265923,.F.); +#268115 = ORIENTED_EDGE('',*,*,#268116,.F.); +#268116 = EDGE_CURVE('',#264017,#265916,#268117,.T.); +#268117 = LINE('',#268118,#268119); +#268118 = CARTESIAN_POINT('',(168.175,-129.655,-4.6E-02)); +#268119 = VECTOR('',#268120,1.); +#268120 = DIRECTION('',(0.,0.,1.)); +#268121 = CYLINDRICAL_SURFACE('',#268122,0.3); +#268122 = AXIS2_PLACEMENT_3D('',#268123,#268124,#268125); +#268123 = CARTESIAN_POINT('',(168.475,-129.655,-4.6E-02)); +#268124 = DIRECTION('',(-0.,-0.,-1.)); +#268125 = DIRECTION('',(1.,0.,-0.)); +#268126 = ADVANCED_FACE('',(#268127),#268133,.T.); +#268127 = FACE_BOUND('',#268128,.T.); +#268128 = EDGE_LOOP('',(#268129,#268130,#268131,#268132)); +#268129 = ORIENTED_EDGE('',*,*,#264016,.T.); +#268130 = ORIENTED_EDGE('',*,*,#268116,.T.); +#268131 = ORIENTED_EDGE('',*,*,#265915,.F.); +#268132 = ORIENTED_EDGE('',*,*,#268075,.F.); +#268133 = PLANE('',#268134); +#268134 = AXIS2_PLACEMENT_3D('',#268135,#268136,#268137); +#268135 = CARTESIAN_POINT('',(168.175,-129.655,-4.6E-02)); +#268136 = DIRECTION('',(1.,0.,-0.)); +#268137 = DIRECTION('',(0.,-1.,0.)); +#268138 = ADVANCED_FACE('',(#268139),#268150,.F.); +#268139 = FACE_BOUND('',#268140,.T.); +#268140 = EDGE_LOOP('',(#268141,#268142,#268148,#268149)); +#268141 = ORIENTED_EDGE('',*,*,#264041,.T.); +#268142 = ORIENTED_EDGE('',*,*,#268143,.T.); +#268143 = EDGE_CURVE('',#264042,#265941,#268144,.T.); +#268144 = LINE('',#268145,#268146); +#268145 = CARTESIAN_POINT('',(164.575,-129.625,-4.6E-02)); +#268146 = VECTOR('',#268147,1.); +#268147 = DIRECTION('',(0.,0.,1.)); +#268148 = ORIENTED_EDGE('',*,*,#265940,.F.); +#268149 = ORIENTED_EDGE('',*,*,#268143,.F.); +#268150 = CYLINDRICAL_SURFACE('',#268151,0.2); +#268151 = AXIS2_PLACEMENT_3D('',#268152,#268153,#268154); +#268152 = CARTESIAN_POINT('',(164.575,-129.425,-4.6E-02)); +#268153 = DIRECTION('',(-0.,-0.,-1.)); +#268154 = DIRECTION('',(-0.,-1.,0.)); +#268155 = ADVANCED_FACE('',(#268156),#268167,.F.); +#268156 = FACE_BOUND('',#268157,.T.); +#268157 = EDGE_LOOP('',(#268158,#268159,#268165,#268166)); +#268158 = ORIENTED_EDGE('',*,*,#264052,.T.); +#268159 = ORIENTED_EDGE('',*,*,#268160,.T.); +#268160 = EDGE_CURVE('',#264053,#265952,#268161,.T.); +#268161 = LINE('',#268162,#268163); +#268162 = CARTESIAN_POINT('',(165.425,-129.625,-4.6E-02)); +#268163 = VECTOR('',#268164,1.); +#268164 = DIRECTION('',(0.,0.,1.)); +#268165 = ORIENTED_EDGE('',*,*,#265951,.F.); +#268166 = ORIENTED_EDGE('',*,*,#268160,.F.); +#268167 = CYLINDRICAL_SURFACE('',#268168,0.2); +#268168 = AXIS2_PLACEMENT_3D('',#268169,#268170,#268171); +#268169 = CARTESIAN_POINT('',(165.425,-129.425,-4.6E-02)); +#268170 = DIRECTION('',(-0.,-0.,-1.)); +#268171 = DIRECTION('',(-0.,-1.,0.)); +#268172 = ADVANCED_FACE('',(#268173),#268184,.F.); +#268173 = FACE_BOUND('',#268174,.T.); +#268174 = EDGE_LOOP('',(#268175,#268176,#268182,#268183)); +#268175 = ORIENTED_EDGE('',*,*,#264063,.T.); +#268176 = ORIENTED_EDGE('',*,*,#268177,.T.); +#268177 = EDGE_CURVE('',#264064,#265963,#268178,.T.); +#268178 = LINE('',#268179,#268180); +#268179 = CARTESIAN_POINT('',(166.275,-129.625,-4.6E-02)); +#268180 = VECTOR('',#268181,1.); +#268181 = DIRECTION('',(0.,0.,1.)); +#268182 = ORIENTED_EDGE('',*,*,#265962,.F.); +#268183 = ORIENTED_EDGE('',*,*,#268177,.F.); +#268184 = CYLINDRICAL_SURFACE('',#268185,0.2); +#268185 = AXIS2_PLACEMENT_3D('',#268186,#268187,#268188); +#268186 = CARTESIAN_POINT('',(166.275,-129.425,-4.6E-02)); +#268187 = DIRECTION('',(-0.,0.,-1.)); +#268188 = DIRECTION('',(1.42108547152E-13,-1.,-0.)); +#268189 = ADVANCED_FACE('',(#268190),#268201,.F.); +#268190 = FACE_BOUND('',#268191,.T.); +#268191 = EDGE_LOOP('',(#268192,#268193,#268199,#268200)); +#268192 = ORIENTED_EDGE('',*,*,#264074,.T.); +#268193 = ORIENTED_EDGE('',*,*,#268194,.T.); +#268194 = EDGE_CURVE('',#264075,#265974,#268195,.T.); +#268195 = LINE('',#268196,#268197); +#268196 = CARTESIAN_POINT('',(167.125,-129.625,-4.6E-02)); +#268197 = VECTOR('',#268198,1.); +#268198 = DIRECTION('',(0.,0.,1.)); +#268199 = ORIENTED_EDGE('',*,*,#265973,.F.); +#268200 = ORIENTED_EDGE('',*,*,#268194,.F.); +#268201 = CYLINDRICAL_SURFACE('',#268202,0.2); +#268202 = AXIS2_PLACEMENT_3D('',#268203,#268204,#268205); +#268203 = CARTESIAN_POINT('',(167.125,-129.425,-4.6E-02)); +#268204 = DIRECTION('',(-0.,-0.,-1.)); +#268205 = DIRECTION('',(-0.,-1.,0.)); +#268206 = ADVANCED_FACE('',(#268207),#268218,.F.); +#268207 = FACE_BOUND('',#268208,.T.); +#268208 = EDGE_LOOP('',(#268209,#268210,#268216,#268217)); +#268209 = ORIENTED_EDGE('',*,*,#264085,.T.); +#268210 = ORIENTED_EDGE('',*,*,#268211,.T.); +#268211 = EDGE_CURVE('',#264086,#265985,#268212,.T.); +#268212 = LINE('',#268213,#268214); +#268213 = CARTESIAN_POINT('',(182.69165,-134.4731,-4.6E-02)); +#268214 = VECTOR('',#268215,1.); +#268215 = DIRECTION('',(0.,0.,1.)); +#268216 = ORIENTED_EDGE('',*,*,#265984,.F.); +#268217 = ORIENTED_EDGE('',*,*,#268211,.F.); +#268218 = CYLINDRICAL_SURFACE('',#268219,0.65); +#268219 = AXIS2_PLACEMENT_3D('',#268220,#268221,#268222); +#268220 = CARTESIAN_POINT('',(182.69165,-133.8231,-4.6E-02)); +#268221 = DIRECTION('',(-0.,0.,-1.)); +#268222 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268223 = ADVANCED_FACE('',(#268224),#268235,.F.); +#268224 = FACE_BOUND('',#268225,.T.); +#268225 = EDGE_LOOP('',(#268226,#268227,#268233,#268234)); +#268226 = ORIENTED_EDGE('',*,*,#264096,.T.); +#268227 = ORIENTED_EDGE('',*,*,#268228,.T.); +#268228 = EDGE_CURVE('',#264097,#265996,#268229,.T.); +#268229 = LINE('',#268230,#268231); +#268230 = CARTESIAN_POINT('',(187.69165,-134.4731,-4.6E-02)); +#268231 = VECTOR('',#268232,1.); +#268232 = DIRECTION('',(0.,0.,1.)); +#268233 = ORIENTED_EDGE('',*,*,#265995,.F.); +#268234 = ORIENTED_EDGE('',*,*,#268228,.F.); +#268235 = CYLINDRICAL_SURFACE('',#268236,0.65); +#268236 = AXIS2_PLACEMENT_3D('',#268237,#268238,#268239); +#268237 = CARTESIAN_POINT('',(187.69165,-133.8231,-4.6E-02)); +#268238 = DIRECTION('',(-0.,0.,-1.)); +#268239 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268240 = ADVANCED_FACE('',(#268241),#268252,.F.); +#268241 = FACE_BOUND('',#268242,.T.); +#268242 = EDGE_LOOP('',(#268243,#268244,#268250,#268251)); +#268243 = ORIENTED_EDGE('',*,*,#264107,.T.); +#268244 = ORIENTED_EDGE('',*,*,#268245,.T.); +#268245 = EDGE_CURVE('',#264108,#266007,#268246,.T.); +#268246 = LINE('',#268247,#268248); +#268247 = CARTESIAN_POINT('',(192.69165,-134.4731,-4.6E-02)); +#268248 = VECTOR('',#268249,1.); +#268249 = DIRECTION('',(0.,0.,1.)); +#268250 = ORIENTED_EDGE('',*,*,#266006,.F.); +#268251 = ORIENTED_EDGE('',*,*,#268245,.F.); +#268252 = CYLINDRICAL_SURFACE('',#268253,0.65); +#268253 = AXIS2_PLACEMENT_3D('',#268254,#268255,#268256); +#268254 = CARTESIAN_POINT('',(192.69165,-133.8231,-4.6E-02)); +#268255 = DIRECTION('',(-0.,0.,-1.)); +#268256 = DIRECTION('',(4.372570681601E-14,-1.,-0.)); +#268257 = ADVANCED_FACE('',(#268258),#268269,.F.); +#268258 = FACE_BOUND('',#268259,.T.); +#268259 = EDGE_LOOP('',(#268260,#268261,#268267,#268268)); +#268260 = ORIENTED_EDGE('',*,*,#264118,.T.); +#268261 = ORIENTED_EDGE('',*,*,#268262,.T.); +#268262 = EDGE_CURVE('',#264119,#266018,#268263,.T.); +#268263 = LINE('',#268264,#268265); +#268264 = CARTESIAN_POINT('',(199.19165,-138.3731,-4.6E-02)); +#268265 = VECTOR('',#268266,1.); +#268266 = DIRECTION('',(0.,0.,1.)); +#268267 = ORIENTED_EDGE('',*,*,#266017,.F.); +#268268 = ORIENTED_EDGE('',*,*,#268262,.F.); +#268269 = CYLINDRICAL_SURFACE('',#268270,0.55); +#268270 = AXIS2_PLACEMENT_3D('',#268271,#268272,#268273); +#268271 = CARTESIAN_POINT('',(199.19165,-137.8231,-4.6E-02)); +#268272 = DIRECTION('',(-0.,0.,-1.)); +#268273 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268274 = ADVANCED_FACE('',(#268275),#268286,.F.); +#268275 = FACE_BOUND('',#268276,.T.); +#268276 = EDGE_LOOP('',(#268277,#268278,#268284,#268285)); +#268277 = ORIENTED_EDGE('',*,*,#264129,.T.); +#268278 = ORIENTED_EDGE('',*,*,#268279,.T.); +#268279 = EDGE_CURVE('',#264130,#266029,#268280,.T.); +#268280 = LINE('',#268281,#268282); +#268281 = CARTESIAN_POINT('',(199.19165,-133.8731,-4.6E-02)); +#268282 = VECTOR('',#268283,1.); +#268283 = DIRECTION('',(0.,0.,1.)); +#268284 = ORIENTED_EDGE('',*,*,#266028,.F.); +#268285 = ORIENTED_EDGE('',*,*,#268279,.F.); +#268286 = CYLINDRICAL_SURFACE('',#268287,0.55); +#268287 = AXIS2_PLACEMENT_3D('',#268288,#268289,#268290); +#268288 = CARTESIAN_POINT('',(199.19165,-133.3231,-4.6E-02)); +#268289 = DIRECTION('',(-0.,0.,-1.)); +#268290 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268291 = ADVANCED_FACE('',(#268292),#268303,.F.); +#268292 = FACE_BOUND('',#268293,.T.); +#268293 = EDGE_LOOP('',(#268294,#268295,#268301,#268302)); +#268294 = ORIENTED_EDGE('',*,*,#264140,.T.); +#268295 = ORIENTED_EDGE('',*,*,#268296,.T.); +#268296 = EDGE_CURVE('',#264141,#266040,#268297,.T.); +#268297 = LINE('',#268298,#268299); +#268298 = CARTESIAN_POINT('',(205.69165,-138.3731,-4.6E-02)); +#268299 = VECTOR('',#268300,1.); +#268300 = DIRECTION('',(0.,0.,1.)); +#268301 = ORIENTED_EDGE('',*,*,#266039,.F.); +#268302 = ORIENTED_EDGE('',*,*,#268296,.F.); +#268303 = CYLINDRICAL_SURFACE('',#268304,0.55); +#268304 = AXIS2_PLACEMENT_3D('',#268305,#268306,#268307); +#268305 = CARTESIAN_POINT('',(205.69165,-137.8231,-4.6E-02)); +#268306 = DIRECTION('',(-0.,0.,-1.)); +#268307 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268308 = ADVANCED_FACE('',(#268309),#268320,.F.); +#268309 = FACE_BOUND('',#268310,.T.); +#268310 = EDGE_LOOP('',(#268311,#268312,#268318,#268319)); +#268311 = ORIENTED_EDGE('',*,*,#264151,.T.); +#268312 = ORIENTED_EDGE('',*,*,#268313,.T.); +#268313 = EDGE_CURVE('',#264152,#266051,#268314,.T.); +#268314 = LINE('',#268315,#268316); +#268315 = CARTESIAN_POINT('',(205.69165,-133.8731,-4.6E-02)); +#268316 = VECTOR('',#268317,1.); +#268317 = DIRECTION('',(0.,0.,1.)); +#268318 = ORIENTED_EDGE('',*,*,#266050,.F.); +#268319 = ORIENTED_EDGE('',*,*,#268313,.F.); +#268320 = CYLINDRICAL_SURFACE('',#268321,0.55); +#268321 = AXIS2_PLACEMENT_3D('',#268322,#268323,#268324); +#268322 = CARTESIAN_POINT('',(205.69165,-133.3231,-4.6E-02)); +#268323 = DIRECTION('',(-0.,0.,-1.)); +#268324 = DIRECTION('',(5.1675835328E-14,-1.,-0.)); +#268325 = ADVANCED_FACE('',(#268326),#268337,.F.); +#268326 = FACE_BOUND('',#268327,.T.); +#268327 = EDGE_LOOP('',(#268328,#268329,#268335,#268336)); +#268328 = ORIENTED_EDGE('',*,*,#264162,.T.); +#268329 = ORIENTED_EDGE('',*,*,#268330,.T.); +#268330 = EDGE_CURVE('',#264163,#266062,#268331,.T.); +#268331 = LINE('',#268332,#268333); +#268332 = CARTESIAN_POINT('',(211.19165,-136.9231,-4.6E-02)); +#268333 = VECTOR('',#268334,1.); +#268334 = DIRECTION('',(0.,0.,1.)); +#268335 = ORIENTED_EDGE('',*,*,#266061,.F.); +#268336 = ORIENTED_EDGE('',*,*,#268330,.F.); +#268337 = CYLINDRICAL_SURFACE('',#268338,1.6); +#268338 = AXIS2_PLACEMENT_3D('',#268339,#268340,#268341); +#268339 = CARTESIAN_POINT('',(211.19165,-135.3231,-4.6E-02)); +#268340 = DIRECTION('',(-0.,0.,-1.)); +#268341 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#268342 = ADVANCED_FACE('',(#268343),#268354,.F.); +#268343 = FACE_BOUND('',#268344,.T.); +#268344 = EDGE_LOOP('',(#268345,#268346,#268352,#268353)); +#268345 = ORIENTED_EDGE('',*,*,#264173,.T.); +#268346 = ORIENTED_EDGE('',*,*,#268347,.T.); +#268347 = EDGE_CURVE('',#264174,#266073,#268348,.T.); +#268348 = LINE('',#268349,#268350); +#268349 = CARTESIAN_POINT('',(210.19165,-121.8231,-4.6E-02)); +#268350 = VECTOR('',#268351,1.); +#268351 = DIRECTION('',(0.,0.,1.)); +#268352 = ORIENTED_EDGE('',*,*,#266072,.F.); +#268353 = ORIENTED_EDGE('',*,*,#268347,.F.); +#268354 = CYLINDRICAL_SURFACE('',#268355,0.5); +#268355 = AXIS2_PLACEMENT_3D('',#268356,#268357,#268358); +#268356 = CARTESIAN_POINT('',(210.19165,-121.3231,-4.6E-02)); +#268357 = DIRECTION('',(-0.,-0.,-1.)); +#268358 = DIRECTION('',(-0.,-1.,0.)); +#268359 = ADVANCED_FACE('',(#268360),#268371,.F.); +#268360 = FACE_BOUND('',#268361,.T.); +#268361 = EDGE_LOOP('',(#268362,#268363,#268369,#268370)); +#268362 = ORIENTED_EDGE('',*,*,#264184,.T.); +#268363 = ORIENTED_EDGE('',*,*,#268364,.T.); +#268364 = EDGE_CURVE('',#264185,#266084,#268365,.T.); +#268365 = LINE('',#268366,#268367); +#268366 = CARTESIAN_POINT('',(210.19165,-119.3231,-4.6E-02)); +#268367 = VECTOR('',#268368,1.); +#268368 = DIRECTION('',(0.,0.,1.)); +#268369 = ORIENTED_EDGE('',*,*,#266083,.F.); +#268370 = ORIENTED_EDGE('',*,*,#268364,.F.); +#268371 = CYLINDRICAL_SURFACE('',#268372,0.5); +#268372 = AXIS2_PLACEMENT_3D('',#268373,#268374,#268375); +#268373 = CARTESIAN_POINT('',(210.19165,-118.8231,-4.6E-02)); +#268374 = DIRECTION('',(-0.,-0.,-1.)); +#268375 = DIRECTION('',(-0.,-1.,0.)); +#268376 = ADVANCED_FACE('',(#268377),#268388,.F.); +#268377 = FACE_BOUND('',#268378,.T.); +#268378 = EDGE_LOOP('',(#268379,#268380,#268386,#268387)); +#268379 = ORIENTED_EDGE('',*,*,#264195,.T.); +#268380 = ORIENTED_EDGE('',*,*,#268381,.T.); +#268381 = EDGE_CURVE('',#264196,#266095,#268382,.T.); +#268382 = LINE('',#268383,#268384); +#268383 = CARTESIAN_POINT('',(174.19165,-93.2231,-4.6E-02)); +#268384 = VECTOR('',#268385,1.); +#268385 = DIRECTION('',(0.,0.,1.)); +#268386 = ORIENTED_EDGE('',*,*,#266094,.F.); +#268387 = ORIENTED_EDGE('',*,*,#268381,.F.); +#268388 = CYLINDRICAL_SURFACE('',#268389,0.4); +#268389 = AXIS2_PLACEMENT_3D('',#268390,#268391,#268392); +#268390 = CARTESIAN_POINT('',(174.19165,-92.8231,-4.6E-02)); +#268391 = DIRECTION('',(-0.,0.,-1.)); +#268392 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#268393 = ADVANCED_FACE('',(#268394),#268405,.F.); +#268394 = FACE_BOUND('',#268395,.T.); +#268395 = EDGE_LOOP('',(#268396,#268397,#268403,#268404)); +#268396 = ORIENTED_EDGE('',*,*,#264206,.T.); +#268397 = ORIENTED_EDGE('',*,*,#268398,.T.); +#268398 = EDGE_CURVE('',#264207,#266106,#268399,.T.); +#268399 = LINE('',#268400,#268401); +#268400 = CARTESIAN_POINT('',(210.19165,-108.7981,-4.6E-02)); +#268401 = VECTOR('',#268402,1.); +#268402 = DIRECTION('',(0.,0.,1.)); +#268403 = ORIENTED_EDGE('',*,*,#266105,.F.); +#268404 = ORIENTED_EDGE('',*,*,#268398,.F.); +#268405 = CYLINDRICAL_SURFACE('',#268406,0.475); +#268406 = AXIS2_PLACEMENT_3D('',#268407,#268408,#268409); +#268407 = CARTESIAN_POINT('',(210.19165,-108.3231,-4.6E-02)); +#268408 = DIRECTION('',(-0.,0.,-1.)); +#268409 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268410 = ADVANCED_FACE('',(#268411),#268422,.F.); +#268411 = FACE_BOUND('',#268412,.T.); +#268412 = EDGE_LOOP('',(#268413,#268414,#268420,#268421)); +#268413 = ORIENTED_EDGE('',*,*,#264217,.T.); +#268414 = ORIENTED_EDGE('',*,*,#268415,.T.); +#268415 = EDGE_CURVE('',#264218,#266117,#268416,.T.); +#268416 = LINE('',#268417,#268418); +#268417 = CARTESIAN_POINT('',(210.19165,-106.2981,-4.6E-02)); +#268418 = VECTOR('',#268419,1.); +#268419 = DIRECTION('',(0.,0.,1.)); +#268420 = ORIENTED_EDGE('',*,*,#266116,.F.); +#268421 = ORIENTED_EDGE('',*,*,#268415,.F.); +#268422 = CYLINDRICAL_SURFACE('',#268423,0.475); +#268423 = AXIS2_PLACEMENT_3D('',#268424,#268425,#268426); +#268424 = CARTESIAN_POINT('',(210.19165,-105.8231,-4.6E-02)); +#268425 = DIRECTION('',(-0.,0.,-1.)); +#268426 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268427 = ADVANCED_FACE('',(#268428),#268439,.F.); +#268428 = FACE_BOUND('',#268429,.T.); +#268429 = EDGE_LOOP('',(#268430,#268431,#268437,#268438)); +#268430 = ORIENTED_EDGE('',*,*,#264228,.T.); +#268431 = ORIENTED_EDGE('',*,*,#268432,.T.); +#268432 = EDGE_CURVE('',#264229,#266128,#268433,.T.); +#268433 = LINE('',#268434,#268435); +#268434 = CARTESIAN_POINT('',(210.19165,-103.7981,-4.6E-02)); +#268435 = VECTOR('',#268436,1.); +#268436 = DIRECTION('',(0.,0.,1.)); +#268437 = ORIENTED_EDGE('',*,*,#266127,.F.); +#268438 = ORIENTED_EDGE('',*,*,#268432,.F.); +#268439 = CYLINDRICAL_SURFACE('',#268440,0.475); +#268440 = AXIS2_PLACEMENT_3D('',#268441,#268442,#268443); +#268441 = CARTESIAN_POINT('',(210.19165,-103.3231,-4.6E-02)); +#268442 = DIRECTION('',(-0.,0.,-1.)); +#268443 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268444 = ADVANCED_FACE('',(#268445),#268456,.F.); +#268445 = FACE_BOUND('',#268446,.T.); +#268446 = EDGE_LOOP('',(#268447,#268448,#268454,#268455)); +#268447 = ORIENTED_EDGE('',*,*,#264239,.T.); +#268448 = ORIENTED_EDGE('',*,*,#268449,.T.); +#268449 = EDGE_CURVE('',#264240,#266139,#268450,.T.); +#268450 = LINE('',#268451,#268452); +#268451 = CARTESIAN_POINT('',(196.54165,-93.2231,-4.6E-02)); +#268452 = VECTOR('',#268453,1.); +#268453 = DIRECTION('',(0.,0.,1.)); +#268454 = ORIENTED_EDGE('',*,*,#266138,.F.); +#268455 = ORIENTED_EDGE('',*,*,#268449,.F.); +#268456 = CYLINDRICAL_SURFACE('',#268457,0.4); +#268457 = AXIS2_PLACEMENT_3D('',#268458,#268459,#268460); +#268458 = CARTESIAN_POINT('',(196.54165,-92.8231,-4.6E-02)); +#268459 = DIRECTION('',(-0.,-0.,-1.)); +#268460 = DIRECTION('',(-0.,-1.,0.)); +#268461 = ADVANCED_FACE('',(#268462),#268473,.F.); +#268462 = FACE_BOUND('',#268463,.T.); +#268463 = EDGE_LOOP('',(#268464,#268465,#268471,#268472)); +#268464 = ORIENTED_EDGE('',*,*,#264250,.T.); +#268465 = ORIENTED_EDGE('',*,*,#268466,.T.); +#268466 = EDGE_CURVE('',#264251,#266150,#268467,.T.); +#268467 = LINE('',#268468,#268469); +#268468 = CARTESIAN_POINT('',(210.19165,-95.7981,-4.6E-02)); +#268469 = VECTOR('',#268470,1.); +#268470 = DIRECTION('',(0.,0.,1.)); +#268471 = ORIENTED_EDGE('',*,*,#266149,.F.); +#268472 = ORIENTED_EDGE('',*,*,#268466,.F.); +#268473 = CYLINDRICAL_SURFACE('',#268474,0.475); +#268474 = AXIS2_PLACEMENT_3D('',#268475,#268476,#268477); +#268475 = CARTESIAN_POINT('',(210.19165,-95.3231,-4.6E-02)); +#268476 = DIRECTION('',(-0.,0.,-1.)); +#268477 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268478 = ADVANCED_FACE('',(#268479),#268490,.F.); +#268479 = FACE_BOUND('',#268480,.T.); +#268480 = EDGE_LOOP('',(#268481,#268482,#268488,#268489)); +#268481 = ORIENTED_EDGE('',*,*,#264261,.T.); +#268482 = ORIENTED_EDGE('',*,*,#268483,.T.); +#268483 = EDGE_CURVE('',#264262,#266161,#268484,.T.); +#268484 = LINE('',#268485,#268486); +#268485 = CARTESIAN_POINT('',(210.19165,-93.2981,-4.6E-02)); +#268486 = VECTOR('',#268487,1.); +#268487 = DIRECTION('',(0.,0.,1.)); +#268488 = ORIENTED_EDGE('',*,*,#266160,.F.); +#268489 = ORIENTED_EDGE('',*,*,#268483,.F.); +#268490 = CYLINDRICAL_SURFACE('',#268491,0.475); +#268491 = AXIS2_PLACEMENT_3D('',#268492,#268493,#268494); +#268492 = CARTESIAN_POINT('',(210.19165,-92.8231,-4.6E-02)); +#268493 = DIRECTION('',(-0.,0.,-1.)); +#268494 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#268495 = ADVANCED_FACE('',(#268496),#268507,.F.); +#268496 = FACE_BOUND('',#268497,.T.); +#268497 = EDGE_LOOP('',(#268498,#268499,#268505,#268506)); +#268498 = ORIENTED_EDGE('',*,*,#264272,.T.); +#268499 = ORIENTED_EDGE('',*,*,#268500,.T.); +#268500 = EDGE_CURVE('',#264273,#266172,#268501,.T.); +#268501 = LINE('',#268502,#268503); +#268502 = CARTESIAN_POINT('',(106.11165,-81.8231,-4.6E-02)); +#268503 = VECTOR('',#268504,1.); +#268504 = DIRECTION('',(0.,0.,1.)); +#268505 = ORIENTED_EDGE('',*,*,#266171,.F.); +#268506 = ORIENTED_EDGE('',*,*,#268500,.F.); +#268507 = CYLINDRICAL_SURFACE('',#268508,0.5); +#268508 = AXIS2_PLACEMENT_3D('',#268509,#268510,#268511); +#268509 = CARTESIAN_POINT('',(106.11165,-81.3231,-4.6E-02)); +#268510 = DIRECTION('',(-0.,-0.,-1.)); +#268511 = DIRECTION('',(-0.,-1.,0.)); +#268512 = ADVANCED_FACE('',(#268513),#268524,.F.); +#268513 = FACE_BOUND('',#268514,.T.); +#268514 = EDGE_LOOP('',(#268515,#268516,#268522,#268523)); +#268515 = ORIENTED_EDGE('',*,*,#264283,.T.); +#268516 = ORIENTED_EDGE('',*,*,#268517,.T.); +#268517 = EDGE_CURVE('',#264284,#266183,#268518,.T.); +#268518 = LINE('',#268519,#268520); +#268519 = CARTESIAN_POINT('',(108.65165,-81.8231,-4.6E-02)); +#268520 = VECTOR('',#268521,1.); +#268521 = DIRECTION('',(0.,0.,1.)); +#268522 = ORIENTED_EDGE('',*,*,#266182,.F.); +#268523 = ORIENTED_EDGE('',*,*,#268517,.F.); +#268524 = CYLINDRICAL_SURFACE('',#268525,0.5); +#268525 = AXIS2_PLACEMENT_3D('',#268526,#268527,#268528); +#268526 = CARTESIAN_POINT('',(108.65165,-81.3231,-4.6E-02)); +#268527 = DIRECTION('',(-0.,-0.,-1.)); +#268528 = DIRECTION('',(-0.,-1.,0.)); +#268529 = ADVANCED_FACE('',(#268530),#268541,.F.); +#268530 = FACE_BOUND('',#268531,.T.); +#268531 = EDGE_LOOP('',(#268532,#268533,#268539,#268540)); +#268532 = ORIENTED_EDGE('',*,*,#264294,.T.); +#268533 = ORIENTED_EDGE('',*,*,#268534,.T.); +#268534 = EDGE_CURVE('',#264295,#266194,#268535,.T.); +#268535 = LINE('',#268536,#268537); +#268536 = CARTESIAN_POINT('',(111.19165,-81.8231,-4.6E-02)); +#268537 = VECTOR('',#268538,1.); +#268538 = DIRECTION('',(0.,0.,1.)); +#268539 = ORIENTED_EDGE('',*,*,#266193,.F.); +#268540 = ORIENTED_EDGE('',*,*,#268534,.F.); +#268541 = CYLINDRICAL_SURFACE('',#268542,0.5); +#268542 = AXIS2_PLACEMENT_3D('',#268543,#268544,#268545); +#268543 = CARTESIAN_POINT('',(111.19165,-81.3231,-4.6E-02)); +#268544 = DIRECTION('',(-0.,-0.,-1.)); +#268545 = DIRECTION('',(-0.,-1.,0.)); +#268546 = ADVANCED_FACE('',(#268547),#268558,.F.); +#268547 = FACE_BOUND('',#268548,.T.); +#268548 = EDGE_LOOP('',(#268549,#268550,#268556,#268557)); +#268549 = ORIENTED_EDGE('',*,*,#264305,.T.); +#268550 = ORIENTED_EDGE('',*,*,#268551,.T.); +#268551 = EDGE_CURVE('',#264306,#266205,#268552,.T.); +#268552 = LINE('',#268553,#268554); +#268553 = CARTESIAN_POINT('',(113.73165,-81.8231,-4.6E-02)); +#268554 = VECTOR('',#268555,1.); +#268555 = DIRECTION('',(0.,0.,1.)); +#268556 = ORIENTED_EDGE('',*,*,#266204,.F.); +#268557 = ORIENTED_EDGE('',*,*,#268551,.F.); +#268558 = CYLINDRICAL_SURFACE('',#268559,0.5); +#268559 = AXIS2_PLACEMENT_3D('',#268560,#268561,#268562); +#268560 = CARTESIAN_POINT('',(113.73165,-81.3231,-4.6E-02)); +#268561 = DIRECTION('',(-0.,-0.,-1.)); +#268562 = DIRECTION('',(-0.,-1.,0.)); +#268563 = ADVANCED_FACE('',(#268564),#268575,.F.); +#268564 = FACE_BOUND('',#268565,.T.); +#268565 = EDGE_LOOP('',(#268566,#268567,#268573,#268574)); +#268566 = ORIENTED_EDGE('',*,*,#264316,.T.); +#268567 = ORIENTED_EDGE('',*,*,#268568,.T.); +#268568 = EDGE_CURVE('',#264317,#266216,#268569,.T.); +#268569 = LINE('',#268570,#268571); +#268570 = CARTESIAN_POINT('',(107.19165,-74.6031,-4.6E-02)); +#268571 = VECTOR('',#268572,1.); +#268572 = DIRECTION('',(0.,0.,1.)); +#268573 = ORIENTED_EDGE('',*,*,#266215,.F.); +#268574 = ORIENTED_EDGE('',*,*,#268568,.F.); +#268575 = CYLINDRICAL_SURFACE('',#268576,0.5); +#268576 = AXIS2_PLACEMENT_3D('',#268577,#268578,#268579); +#268577 = CARTESIAN_POINT('',(107.19165,-74.1031,-4.6E-02)); +#268578 = DIRECTION('',(-0.,-0.,-1.)); +#268579 = DIRECTION('',(-0.,-1.,0.)); +#268580 = ADVANCED_FACE('',(#268581),#268592,.F.); +#268581 = FACE_BOUND('',#268582,.T.); +#268582 = EDGE_LOOP('',(#268583,#268584,#268590,#268591)); +#268583 = ORIENTED_EDGE('',*,*,#264327,.T.); +#268584 = ORIENTED_EDGE('',*,*,#268585,.T.); +#268585 = EDGE_CURVE('',#264328,#266227,#268586,.T.); +#268586 = LINE('',#268587,#268588); +#268587 = CARTESIAN_POINT('',(109.73165,-74.6031,-4.6E-02)); +#268588 = VECTOR('',#268589,1.); +#268589 = DIRECTION('',(0.,0.,1.)); +#268590 = ORIENTED_EDGE('',*,*,#266226,.F.); +#268591 = ORIENTED_EDGE('',*,*,#268585,.F.); +#268592 = CYLINDRICAL_SURFACE('',#268593,0.5); +#268593 = AXIS2_PLACEMENT_3D('',#268594,#268595,#268596); +#268594 = CARTESIAN_POINT('',(109.73165,-74.1031,-4.6E-02)); +#268595 = DIRECTION('',(-0.,-0.,-1.)); +#268596 = DIRECTION('',(-0.,-1.,0.)); +#268597 = ADVANCED_FACE('',(#268598),#268609,.F.); +#268598 = FACE_BOUND('',#268599,.T.); +#268599 = EDGE_LOOP('',(#268600,#268601,#268607,#268608)); +#268600 = ORIENTED_EDGE('',*,*,#264338,.T.); +#268601 = ORIENTED_EDGE('',*,*,#268602,.T.); +#268602 = EDGE_CURVE('',#264339,#266238,#268603,.T.); +#268603 = LINE('',#268604,#268605); +#268604 = CARTESIAN_POINT('',(112.27165,-74.6031,-4.6E-02)); +#268605 = VECTOR('',#268606,1.); +#268606 = DIRECTION('',(0.,0.,1.)); +#268607 = ORIENTED_EDGE('',*,*,#266237,.F.); +#268608 = ORIENTED_EDGE('',*,*,#268602,.F.); +#268609 = CYLINDRICAL_SURFACE('',#268610,0.5); +#268610 = AXIS2_PLACEMENT_3D('',#268611,#268612,#268613); +#268611 = CARTESIAN_POINT('',(112.27165,-74.1031,-4.6E-02)); +#268612 = DIRECTION('',(-0.,-0.,-1.)); +#268613 = DIRECTION('',(-0.,-1.,0.)); +#268614 = ADVANCED_FACE('',(#268615),#268626,.F.); +#268615 = FACE_BOUND('',#268616,.T.); +#268616 = EDGE_LOOP('',(#268617,#268618,#268624,#268625)); +#268617 = ORIENTED_EDGE('',*,*,#264349,.T.); +#268618 = ORIENTED_EDGE('',*,*,#268619,.T.); +#268619 = EDGE_CURVE('',#264350,#266249,#268620,.T.); +#268620 = LINE('',#268621,#268622); +#268621 = CARTESIAN_POINT('',(114.81165,-74.6031,-4.6E-02)); +#268622 = VECTOR('',#268623,1.); +#268623 = DIRECTION('',(0.,0.,1.)); +#268624 = ORIENTED_EDGE('',*,*,#266248,.F.); +#268625 = ORIENTED_EDGE('',*,*,#268619,.F.); +#268626 = CYLINDRICAL_SURFACE('',#268627,0.5); +#268627 = AXIS2_PLACEMENT_3D('',#268628,#268629,#268630); +#268628 = CARTESIAN_POINT('',(114.81165,-74.1031,-4.6E-02)); +#268629 = DIRECTION('',(-0.,-0.,-1.)); +#268630 = DIRECTION('',(-0.,-1.,0.)); +#268631 = ADVANCED_FACE('',(#268632),#268643,.F.); +#268632 = FACE_BOUND('',#268633,.T.); +#268633 = EDGE_LOOP('',(#268634,#268635,#268641,#268642)); +#268634 = ORIENTED_EDGE('',*,*,#264360,.T.); +#268635 = ORIENTED_EDGE('',*,*,#268636,.T.); +#268636 = EDGE_CURVE('',#264361,#266260,#268637,.T.); +#268637 = LINE('',#268638,#268639); +#268638 = CARTESIAN_POINT('',(116.27165,-81.8231,-4.6E-02)); +#268639 = VECTOR('',#268640,1.); +#268640 = DIRECTION('',(0.,0.,1.)); +#268641 = ORIENTED_EDGE('',*,*,#266259,.F.); +#268642 = ORIENTED_EDGE('',*,*,#268636,.F.); +#268643 = CYLINDRICAL_SURFACE('',#268644,0.5); +#268644 = AXIS2_PLACEMENT_3D('',#268645,#268646,#268647); +#268645 = CARTESIAN_POINT('',(116.27165,-81.3231,-4.6E-02)); +#268646 = DIRECTION('',(-0.,-0.,-1.)); +#268647 = DIRECTION('',(-0.,-1.,0.)); +#268648 = ADVANCED_FACE('',(#268649),#268660,.F.); +#268649 = FACE_BOUND('',#268650,.T.); +#268650 = EDGE_LOOP('',(#268651,#268652,#268658,#268659)); +#268651 = ORIENTED_EDGE('',*,*,#264371,.T.); +#268652 = ORIENTED_EDGE('',*,*,#268653,.T.); +#268653 = EDGE_CURVE('',#264372,#266271,#268654,.T.); +#268654 = LINE('',#268655,#268656); +#268655 = CARTESIAN_POINT('',(118.81165,-81.8231,-4.6E-02)); +#268656 = VECTOR('',#268657,1.); +#268657 = DIRECTION('',(0.,0.,1.)); +#268658 = ORIENTED_EDGE('',*,*,#266270,.F.); +#268659 = ORIENTED_EDGE('',*,*,#268653,.F.); +#268660 = CYLINDRICAL_SURFACE('',#268661,0.5); +#268661 = AXIS2_PLACEMENT_3D('',#268662,#268663,#268664); +#268662 = CARTESIAN_POINT('',(118.81165,-81.3231,-4.6E-02)); +#268663 = DIRECTION('',(-0.,-0.,-1.)); +#268664 = DIRECTION('',(-0.,-1.,0.)); +#268665 = ADVANCED_FACE('',(#268666),#268677,.F.); +#268666 = FACE_BOUND('',#268667,.T.); +#268667 = EDGE_LOOP('',(#268668,#268669,#268675,#268676)); +#268668 = ORIENTED_EDGE('',*,*,#264382,.T.); +#268669 = ORIENTED_EDGE('',*,*,#268670,.T.); +#268670 = EDGE_CURVE('',#264383,#266282,#268671,.T.); +#268671 = LINE('',#268672,#268673); +#268672 = CARTESIAN_POINT('',(121.35165,-81.8231,-4.6E-02)); +#268673 = VECTOR('',#268674,1.); +#268674 = DIRECTION('',(0.,0.,1.)); +#268675 = ORIENTED_EDGE('',*,*,#266281,.F.); +#268676 = ORIENTED_EDGE('',*,*,#268670,.F.); +#268677 = CYLINDRICAL_SURFACE('',#268678,0.5); +#268678 = AXIS2_PLACEMENT_3D('',#268679,#268680,#268681); +#268679 = CARTESIAN_POINT('',(121.35165,-81.3231,-4.6E-02)); +#268680 = DIRECTION('',(-0.,-0.,-1.)); +#268681 = DIRECTION('',(-0.,-1.,0.)); +#268682 = ADVANCED_FACE('',(#268683),#268694,.F.); +#268683 = FACE_BOUND('',#268684,.T.); +#268684 = EDGE_LOOP('',(#268685,#268686,#268692,#268693)); +#268685 = ORIENTED_EDGE('',*,*,#264393,.T.); +#268686 = ORIENTED_EDGE('',*,*,#268687,.T.); +#268687 = EDGE_CURVE('',#264394,#266293,#268688,.T.); +#268688 = LINE('',#268689,#268690); +#268689 = CARTESIAN_POINT('',(123.89165,-81.8231,-4.6E-02)); +#268690 = VECTOR('',#268691,1.); +#268691 = DIRECTION('',(0.,0.,1.)); +#268692 = ORIENTED_EDGE('',*,*,#266292,.F.); +#268693 = ORIENTED_EDGE('',*,*,#268687,.F.); +#268694 = CYLINDRICAL_SURFACE('',#268695,0.5); +#268695 = AXIS2_PLACEMENT_3D('',#268696,#268697,#268698); +#268696 = CARTESIAN_POINT('',(123.89165,-81.3231,-4.6E-02)); +#268697 = DIRECTION('',(-0.,-0.,-1.)); +#268698 = DIRECTION('',(-0.,-1.,0.)); +#268699 = ADVANCED_FACE('',(#268700),#268711,.F.); +#268700 = FACE_BOUND('',#268701,.T.); +#268701 = EDGE_LOOP('',(#268702,#268703,#268709,#268710)); +#268702 = ORIENTED_EDGE('',*,*,#264404,.T.); +#268703 = ORIENTED_EDGE('',*,*,#268704,.T.); +#268704 = EDGE_CURVE('',#264405,#266304,#268705,.T.); +#268705 = LINE('',#268706,#268707); +#268706 = CARTESIAN_POINT('',(126.43165,-81.8231,-4.6E-02)); +#268707 = VECTOR('',#268708,1.); +#268708 = DIRECTION('',(0.,0.,1.)); +#268709 = ORIENTED_EDGE('',*,*,#266303,.F.); +#268710 = ORIENTED_EDGE('',*,*,#268704,.F.); +#268711 = CYLINDRICAL_SURFACE('',#268712,0.5); +#268712 = AXIS2_PLACEMENT_3D('',#268713,#268714,#268715); +#268713 = CARTESIAN_POINT('',(126.43165,-81.3231,-4.6E-02)); +#268714 = DIRECTION('',(-0.,-0.,-1.)); +#268715 = DIRECTION('',(-0.,-1.,0.)); +#268716 = ADVANCED_FACE('',(#268717),#268728,.F.); +#268717 = FACE_BOUND('',#268718,.T.); +#268718 = EDGE_LOOP('',(#268719,#268720,#268726,#268727)); +#268719 = ORIENTED_EDGE('',*,*,#264415,.T.); +#268720 = ORIENTED_EDGE('',*,*,#268721,.T.); +#268721 = EDGE_CURVE('',#264416,#266315,#268722,.T.); +#268722 = LINE('',#268723,#268724); +#268723 = CARTESIAN_POINT('',(128.97165,-81.8231,-4.6E-02)); +#268724 = VECTOR('',#268725,1.); +#268725 = DIRECTION('',(0.,0.,1.)); +#268726 = ORIENTED_EDGE('',*,*,#266314,.F.); +#268727 = ORIENTED_EDGE('',*,*,#268721,.F.); +#268728 = CYLINDRICAL_SURFACE('',#268729,0.5); +#268729 = AXIS2_PLACEMENT_3D('',#268730,#268731,#268732); +#268730 = CARTESIAN_POINT('',(128.97165,-81.3231,-4.6E-02)); +#268731 = DIRECTION('',(-0.,-0.,-1.)); +#268732 = DIRECTION('',(-0.,-1.,0.)); +#268733 = ADVANCED_FACE('',(#268734),#268745,.F.); +#268734 = FACE_BOUND('',#268735,.T.); +#268735 = EDGE_LOOP('',(#268736,#268737,#268743,#268744)); +#268736 = ORIENTED_EDGE('',*,*,#264426,.T.); +#268737 = ORIENTED_EDGE('',*,*,#268738,.T.); +#268738 = EDGE_CURVE('',#264427,#266326,#268739,.T.); +#268739 = LINE('',#268740,#268741); +#268740 = CARTESIAN_POINT('',(133.03165,-81.8231,-4.6E-02)); +#268741 = VECTOR('',#268742,1.); +#268742 = DIRECTION('',(0.,0.,1.)); +#268743 = ORIENTED_EDGE('',*,*,#266325,.F.); +#268744 = ORIENTED_EDGE('',*,*,#268738,.F.); +#268745 = CYLINDRICAL_SURFACE('',#268746,0.5); +#268746 = AXIS2_PLACEMENT_3D('',#268747,#268748,#268749); +#268747 = CARTESIAN_POINT('',(133.03165,-81.3231,-4.6E-02)); +#268748 = DIRECTION('',(-0.,-0.,-1.)); +#268749 = DIRECTION('',(-0.,-1.,0.)); +#268750 = ADVANCED_FACE('',(#268751),#268762,.F.); +#268751 = FACE_BOUND('',#268752,.T.); +#268752 = EDGE_LOOP('',(#268753,#268754,#268760,#268761)); +#268753 = ORIENTED_EDGE('',*,*,#264437,.T.); +#268754 = ORIENTED_EDGE('',*,*,#268755,.T.); +#268755 = EDGE_CURVE('',#264438,#266337,#268756,.T.); +#268756 = LINE('',#268757,#268758); +#268757 = CARTESIAN_POINT('',(135.57165,-81.8231,-4.6E-02)); +#268758 = VECTOR('',#268759,1.); +#268759 = DIRECTION('',(0.,0.,1.)); +#268760 = ORIENTED_EDGE('',*,*,#266336,.F.); +#268761 = ORIENTED_EDGE('',*,*,#268755,.F.); +#268762 = CYLINDRICAL_SURFACE('',#268763,0.5); +#268763 = AXIS2_PLACEMENT_3D('',#268764,#268765,#268766); +#268764 = CARTESIAN_POINT('',(135.57165,-81.3231,-4.6E-02)); +#268765 = DIRECTION('',(-0.,-0.,-1.)); +#268766 = DIRECTION('',(-0.,-1.,0.)); +#268767 = ADVANCED_FACE('',(#268768),#268779,.F.); +#268768 = FACE_BOUND('',#268769,.T.); +#268769 = EDGE_LOOP('',(#268770,#268771,#268777,#268778)); +#268770 = ORIENTED_EDGE('',*,*,#264448,.T.); +#268771 = ORIENTED_EDGE('',*,*,#268772,.T.); +#268772 = EDGE_CURVE('',#264449,#266348,#268773,.T.); +#268773 = LINE('',#268774,#268775); +#268774 = CARTESIAN_POINT('',(138.11165,-81.8231,-4.6E-02)); +#268775 = VECTOR('',#268776,1.); +#268776 = DIRECTION('',(0.,0.,1.)); +#268777 = ORIENTED_EDGE('',*,*,#266347,.F.); +#268778 = ORIENTED_EDGE('',*,*,#268772,.F.); +#268779 = CYLINDRICAL_SURFACE('',#268780,0.5); +#268780 = AXIS2_PLACEMENT_3D('',#268781,#268782,#268783); +#268781 = CARTESIAN_POINT('',(138.11165,-81.3231,-4.6E-02)); +#268782 = DIRECTION('',(-0.,-0.,-1.)); +#268783 = DIRECTION('',(-0.,-1.,0.)); +#268784 = ADVANCED_FACE('',(#268785),#268796,.F.); +#268785 = FACE_BOUND('',#268786,.T.); +#268786 = EDGE_LOOP('',(#268787,#268788,#268794,#268795)); +#268787 = ORIENTED_EDGE('',*,*,#264459,.T.); +#268788 = ORIENTED_EDGE('',*,*,#268789,.T.); +#268789 = EDGE_CURVE('',#264460,#266359,#268790,.T.); +#268790 = LINE('',#268791,#268792); +#268791 = CARTESIAN_POINT('',(140.65165,-81.8231,-4.6E-02)); +#268792 = VECTOR('',#268793,1.); +#268793 = DIRECTION('',(0.,0.,1.)); +#268794 = ORIENTED_EDGE('',*,*,#266358,.F.); +#268795 = ORIENTED_EDGE('',*,*,#268789,.F.); +#268796 = CYLINDRICAL_SURFACE('',#268797,0.5); +#268797 = AXIS2_PLACEMENT_3D('',#268798,#268799,#268800); +#268798 = CARTESIAN_POINT('',(140.65165,-81.3231,-4.6E-02)); +#268799 = DIRECTION('',(-0.,-0.,-1.)); +#268800 = DIRECTION('',(-0.,-1.,0.)); +#268801 = ADVANCED_FACE('',(#268802),#268813,.F.); +#268802 = FACE_BOUND('',#268803,.T.); +#268803 = EDGE_LOOP('',(#268804,#268805,#268811,#268812)); +#268804 = ORIENTED_EDGE('',*,*,#264470,.T.); +#268805 = ORIENTED_EDGE('',*,*,#268806,.T.); +#268806 = EDGE_CURVE('',#264471,#266370,#268807,.T.); +#268807 = LINE('',#268808,#268809); +#268808 = CARTESIAN_POINT('',(143.19165,-81.8231,-4.6E-02)); +#268809 = VECTOR('',#268810,1.); +#268810 = DIRECTION('',(0.,0.,1.)); +#268811 = ORIENTED_EDGE('',*,*,#266369,.F.); +#268812 = ORIENTED_EDGE('',*,*,#268806,.F.); +#268813 = CYLINDRICAL_SURFACE('',#268814,0.5); +#268814 = AXIS2_PLACEMENT_3D('',#268815,#268816,#268817); +#268815 = CARTESIAN_POINT('',(143.19165,-81.3231,-4.6E-02)); +#268816 = DIRECTION('',(-0.,-0.,-1.)); +#268817 = DIRECTION('',(-0.,-1.,0.)); +#268818 = ADVANCED_FACE('',(#268819),#268830,.F.); +#268819 = FACE_BOUND('',#268820,.T.); +#268820 = EDGE_LOOP('',(#268821,#268822,#268828,#268829)); +#268821 = ORIENTED_EDGE('',*,*,#264481,.T.); +#268822 = ORIENTED_EDGE('',*,*,#268823,.T.); +#268823 = EDGE_CURVE('',#264482,#266381,#268824,.T.); +#268824 = LINE('',#268825,#268826); +#268825 = CARTESIAN_POINT('',(145.73165,-81.8231,-4.6E-02)); +#268826 = VECTOR('',#268827,1.); +#268827 = DIRECTION('',(0.,0.,1.)); +#268828 = ORIENTED_EDGE('',*,*,#266380,.F.); +#268829 = ORIENTED_EDGE('',*,*,#268823,.F.); +#268830 = CYLINDRICAL_SURFACE('',#268831,0.5); +#268831 = AXIS2_PLACEMENT_3D('',#268832,#268833,#268834); +#268832 = CARTESIAN_POINT('',(145.73165,-81.3231,-4.6E-02)); +#268833 = DIRECTION('',(-0.,-0.,-1.)); +#268834 = DIRECTION('',(-0.,-1.,0.)); +#268835 = ADVANCED_FACE('',(#268836),#268847,.F.); +#268836 = FACE_BOUND('',#268837,.T.); +#268837 = EDGE_LOOP('',(#268838,#268839,#268845,#268846)); +#268838 = ORIENTED_EDGE('',*,*,#264492,.T.); +#268839 = ORIENTED_EDGE('',*,*,#268840,.T.); +#268840 = EDGE_CURVE('',#264493,#266392,#268841,.T.); +#268841 = LINE('',#268842,#268843); +#268842 = CARTESIAN_POINT('',(117.35165,-74.6031,-4.6E-02)); +#268843 = VECTOR('',#268844,1.); +#268844 = DIRECTION('',(0.,0.,1.)); +#268845 = ORIENTED_EDGE('',*,*,#266391,.F.); +#268846 = ORIENTED_EDGE('',*,*,#268840,.F.); +#268847 = CYLINDRICAL_SURFACE('',#268848,0.5); +#268848 = AXIS2_PLACEMENT_3D('',#268849,#268850,#268851); +#268849 = CARTESIAN_POINT('',(117.35165,-74.1031,-4.6E-02)); +#268850 = DIRECTION('',(-0.,-0.,-1.)); +#268851 = DIRECTION('',(-0.,-1.,0.)); +#268852 = ADVANCED_FACE('',(#268853),#268864,.F.); +#268853 = FACE_BOUND('',#268854,.T.); +#268854 = EDGE_LOOP('',(#268855,#268856,#268862,#268863)); +#268855 = ORIENTED_EDGE('',*,*,#264503,.T.); +#268856 = ORIENTED_EDGE('',*,*,#268857,.T.); +#268857 = EDGE_CURVE('',#264504,#266403,#268858,.T.); +#268858 = LINE('',#268859,#268860); +#268859 = CARTESIAN_POINT('',(119.89165,-74.6031,-4.6E-02)); +#268860 = VECTOR('',#268861,1.); +#268861 = DIRECTION('',(0.,0.,1.)); +#268862 = ORIENTED_EDGE('',*,*,#266402,.F.); +#268863 = ORIENTED_EDGE('',*,*,#268857,.F.); +#268864 = CYLINDRICAL_SURFACE('',#268865,0.5); +#268865 = AXIS2_PLACEMENT_3D('',#268866,#268867,#268868); +#268866 = CARTESIAN_POINT('',(119.89165,-74.1031,-4.6E-02)); +#268867 = DIRECTION('',(-0.,-0.,-1.)); +#268868 = DIRECTION('',(-0.,-1.,0.)); +#268869 = ADVANCED_FACE('',(#268870),#268881,.F.); +#268870 = FACE_BOUND('',#268871,.T.); +#268871 = EDGE_LOOP('',(#268872,#268873,#268879,#268880)); +#268872 = ORIENTED_EDGE('',*,*,#264514,.T.); +#268873 = ORIENTED_EDGE('',*,*,#268874,.T.); +#268874 = EDGE_CURVE('',#264515,#266414,#268875,.T.); +#268875 = LINE('',#268876,#268877); +#268876 = CARTESIAN_POINT('',(122.43165,-74.6031,-4.6E-02)); +#268877 = VECTOR('',#268878,1.); +#268878 = DIRECTION('',(0.,0.,1.)); +#268879 = ORIENTED_EDGE('',*,*,#266413,.F.); +#268880 = ORIENTED_EDGE('',*,*,#268874,.F.); +#268881 = CYLINDRICAL_SURFACE('',#268882,0.5); +#268882 = AXIS2_PLACEMENT_3D('',#268883,#268884,#268885); +#268883 = CARTESIAN_POINT('',(122.43165,-74.1031,-4.6E-02)); +#268884 = DIRECTION('',(-0.,-0.,-1.)); +#268885 = DIRECTION('',(-0.,-1.,0.)); +#268886 = ADVANCED_FACE('',(#268887),#268898,.F.); +#268887 = FACE_BOUND('',#268888,.T.); +#268888 = EDGE_LOOP('',(#268889,#268890,#268896,#268897)); +#268889 = ORIENTED_EDGE('',*,*,#264525,.T.); +#268890 = ORIENTED_EDGE('',*,*,#268891,.T.); +#268891 = EDGE_CURVE('',#264526,#266425,#268892,.T.); +#268892 = LINE('',#268893,#268894); +#268893 = CARTESIAN_POINT('',(124.97165,-74.6031,-4.6E-02)); +#268894 = VECTOR('',#268895,1.); +#268895 = DIRECTION('',(0.,0.,1.)); +#268896 = ORIENTED_EDGE('',*,*,#266424,.F.); +#268897 = ORIENTED_EDGE('',*,*,#268891,.F.); +#268898 = CYLINDRICAL_SURFACE('',#268899,0.5); +#268899 = AXIS2_PLACEMENT_3D('',#268900,#268901,#268902); +#268900 = CARTESIAN_POINT('',(124.97165,-74.1031,-4.6E-02)); +#268901 = DIRECTION('',(-0.,-0.,-1.)); +#268902 = DIRECTION('',(-0.,-1.,0.)); +#268903 = ADVANCED_FACE('',(#268904),#268915,.F.); +#268904 = FACE_BOUND('',#268905,.T.); +#268905 = EDGE_LOOP('',(#268906,#268907,#268913,#268914)); +#268906 = ORIENTED_EDGE('',*,*,#264536,.T.); +#268907 = ORIENTED_EDGE('',*,*,#268908,.T.); +#268908 = EDGE_CURVE('',#264537,#266436,#268909,.T.); +#268909 = LINE('',#268910,#268911); +#268910 = CARTESIAN_POINT('',(127.51165,-74.6031,-4.6E-02)); +#268911 = VECTOR('',#268912,1.); +#268912 = DIRECTION('',(0.,0.,1.)); +#268913 = ORIENTED_EDGE('',*,*,#266435,.F.); +#268914 = ORIENTED_EDGE('',*,*,#268908,.F.); +#268915 = CYLINDRICAL_SURFACE('',#268916,0.5); +#268916 = AXIS2_PLACEMENT_3D('',#268917,#268918,#268919); +#268917 = CARTESIAN_POINT('',(127.51165,-74.1031,-4.6E-02)); +#268918 = DIRECTION('',(-0.,-0.,-1.)); +#268919 = DIRECTION('',(-0.,-1.,0.)); +#268920 = ADVANCED_FACE('',(#268921),#268932,.F.); +#268921 = FACE_BOUND('',#268922,.T.); +#268922 = EDGE_LOOP('',(#268923,#268924,#268930,#268931)); +#268923 = ORIENTED_EDGE('',*,*,#264547,.T.); +#268924 = ORIENTED_EDGE('',*,*,#268925,.T.); +#268925 = EDGE_CURVE('',#264548,#266447,#268926,.T.); +#268926 = LINE('',#268927,#268928); +#268927 = CARTESIAN_POINT('',(130.05165,-74.6031,-4.6E-02)); +#268928 = VECTOR('',#268929,1.); +#268929 = DIRECTION('',(0.,0.,1.)); +#268930 = ORIENTED_EDGE('',*,*,#266446,.F.); +#268931 = ORIENTED_EDGE('',*,*,#268925,.F.); +#268932 = CYLINDRICAL_SURFACE('',#268933,0.5); +#268933 = AXIS2_PLACEMENT_3D('',#268934,#268935,#268936); +#268934 = CARTESIAN_POINT('',(130.05165,-74.1031,-4.6E-02)); +#268935 = DIRECTION('',(-0.,-0.,-1.)); +#268936 = DIRECTION('',(-0.,-1.,0.)); +#268937 = ADVANCED_FACE('',(#268938),#268949,.F.); +#268938 = FACE_BOUND('',#268939,.T.); +#268939 = EDGE_LOOP('',(#268940,#268941,#268947,#268948)); +#268940 = ORIENTED_EDGE('',*,*,#264558,.T.); +#268941 = ORIENTED_EDGE('',*,*,#268942,.T.); +#268942 = EDGE_CURVE('',#264559,#266458,#268943,.T.); +#268943 = LINE('',#268944,#268945); +#268944 = CARTESIAN_POINT('',(132.59165,-74.6031,-4.6E-02)); +#268945 = VECTOR('',#268946,1.); +#268946 = DIRECTION('',(0.,0.,1.)); +#268947 = ORIENTED_EDGE('',*,*,#266457,.F.); +#268948 = ORIENTED_EDGE('',*,*,#268942,.F.); +#268949 = CYLINDRICAL_SURFACE('',#268950,0.5); +#268950 = AXIS2_PLACEMENT_3D('',#268951,#268952,#268953); +#268951 = CARTESIAN_POINT('',(132.59165,-74.1031,-4.6E-02)); +#268952 = DIRECTION('',(-0.,-0.,-1.)); +#268953 = DIRECTION('',(-0.,-1.,0.)); +#268954 = ADVANCED_FACE('',(#268955),#268966,.F.); +#268955 = FACE_BOUND('',#268956,.T.); +#268956 = EDGE_LOOP('',(#268957,#268958,#268964,#268965)); +#268957 = ORIENTED_EDGE('',*,*,#264569,.T.); +#268958 = ORIENTED_EDGE('',*,*,#268959,.T.); +#268959 = EDGE_CURVE('',#264570,#266469,#268960,.T.); +#268960 = LINE('',#268961,#268962); +#268961 = CARTESIAN_POINT('',(135.13165,-74.6031,-4.6E-02)); +#268962 = VECTOR('',#268963,1.); +#268963 = DIRECTION('',(0.,0.,1.)); +#268964 = ORIENTED_EDGE('',*,*,#266468,.F.); +#268965 = ORIENTED_EDGE('',*,*,#268959,.F.); +#268966 = CYLINDRICAL_SURFACE('',#268967,0.5); +#268967 = AXIS2_PLACEMENT_3D('',#268968,#268969,#268970); +#268968 = CARTESIAN_POINT('',(135.13165,-74.1031,-4.6E-02)); +#268969 = DIRECTION('',(-0.,-0.,-1.)); +#268970 = DIRECTION('',(-0.,-1.,0.)); +#268971 = ADVANCED_FACE('',(#268972),#268983,.F.); +#268972 = FACE_BOUND('',#268973,.T.); +#268973 = EDGE_LOOP('',(#268974,#268975,#268981,#268982)); +#268974 = ORIENTED_EDGE('',*,*,#264580,.T.); +#268975 = ORIENTED_EDGE('',*,*,#268976,.T.); +#268976 = EDGE_CURVE('',#264581,#266480,#268977,.T.); +#268977 = LINE('',#268978,#268979); +#268978 = CARTESIAN_POINT('',(137.67165,-74.6031,-4.6E-02)); +#268979 = VECTOR('',#268980,1.); +#268980 = DIRECTION('',(0.,0.,1.)); +#268981 = ORIENTED_EDGE('',*,*,#266479,.F.); +#268982 = ORIENTED_EDGE('',*,*,#268976,.F.); +#268983 = CYLINDRICAL_SURFACE('',#268984,0.5); +#268984 = AXIS2_PLACEMENT_3D('',#268985,#268986,#268987); +#268985 = CARTESIAN_POINT('',(137.67165,-74.1031,-4.6E-02)); +#268986 = DIRECTION('',(-0.,-0.,-1.)); +#268987 = DIRECTION('',(-0.,-1.,0.)); +#268988 = ADVANCED_FACE('',(#268989),#269000,.F.); +#268989 = FACE_BOUND('',#268990,.T.); +#268990 = EDGE_LOOP('',(#268991,#268992,#268998,#268999)); +#268991 = ORIENTED_EDGE('',*,*,#264591,.T.); +#268992 = ORIENTED_EDGE('',*,*,#268993,.T.); +#268993 = EDGE_CURVE('',#264592,#266491,#268994,.T.); +#268994 = LINE('',#268995,#268996); +#268995 = CARTESIAN_POINT('',(140.21165,-74.6031,-4.6E-02)); +#268996 = VECTOR('',#268997,1.); +#268997 = DIRECTION('',(0.,0.,1.)); +#268998 = ORIENTED_EDGE('',*,*,#266490,.F.); +#268999 = ORIENTED_EDGE('',*,*,#268993,.F.); +#269000 = CYLINDRICAL_SURFACE('',#269001,0.5); +#269001 = AXIS2_PLACEMENT_3D('',#269002,#269003,#269004); +#269002 = CARTESIAN_POINT('',(140.21165,-74.1031,-4.6E-02)); +#269003 = DIRECTION('',(-0.,-0.,-1.)); +#269004 = DIRECTION('',(-0.,-1.,0.)); +#269005 = ADVANCED_FACE('',(#269006),#269017,.F.); +#269006 = FACE_BOUND('',#269007,.T.); +#269007 = EDGE_LOOP('',(#269008,#269009,#269015,#269016)); +#269008 = ORIENTED_EDGE('',*,*,#264602,.T.); +#269009 = ORIENTED_EDGE('',*,*,#269010,.T.); +#269010 = EDGE_CURVE('',#264603,#266502,#269011,.T.); +#269011 = LINE('',#269012,#269013); +#269012 = CARTESIAN_POINT('',(142.75165,-74.6031,-4.6E-02)); +#269013 = VECTOR('',#269014,1.); +#269014 = DIRECTION('',(0.,0.,1.)); +#269015 = ORIENTED_EDGE('',*,*,#266501,.F.); +#269016 = ORIENTED_EDGE('',*,*,#269010,.F.); +#269017 = CYLINDRICAL_SURFACE('',#269018,0.5); +#269018 = AXIS2_PLACEMENT_3D('',#269019,#269020,#269021); +#269019 = CARTESIAN_POINT('',(142.75165,-74.1031,-4.6E-02)); +#269020 = DIRECTION('',(-0.,-0.,-1.)); +#269021 = DIRECTION('',(-0.,-1.,0.)); +#269022 = ADVANCED_FACE('',(#269023),#269034,.F.); +#269023 = FACE_BOUND('',#269024,.T.); +#269024 = EDGE_LOOP('',(#269025,#269026,#269032,#269033)); +#269025 = ORIENTED_EDGE('',*,*,#264613,.T.); +#269026 = ORIENTED_EDGE('',*,*,#269027,.T.); +#269027 = EDGE_CURVE('',#264614,#266513,#269028,.T.); +#269028 = LINE('',#269029,#269030); +#269029 = CARTESIAN_POINT('',(145.29165,-74.6031,-4.6E-02)); +#269030 = VECTOR('',#269031,1.); +#269031 = DIRECTION('',(0.,0.,1.)); +#269032 = ORIENTED_EDGE('',*,*,#266512,.F.); +#269033 = ORIENTED_EDGE('',*,*,#269027,.F.); +#269034 = CYLINDRICAL_SURFACE('',#269035,0.5); +#269035 = AXIS2_PLACEMENT_3D('',#269036,#269037,#269038); +#269036 = CARTESIAN_POINT('',(145.29165,-74.1031,-4.6E-02)); +#269037 = DIRECTION('',(-0.,-0.,-1.)); +#269038 = DIRECTION('',(-0.,-1.,0.)); +#269039 = ADVANCED_FACE('',(#269040),#269051,.F.); +#269040 = FACE_BOUND('',#269041,.T.); +#269041 = EDGE_LOOP('',(#269042,#269043,#269049,#269050)); +#269042 = ORIENTED_EDGE('',*,*,#264624,.T.); +#269043 = ORIENTED_EDGE('',*,*,#269044,.T.); +#269044 = EDGE_CURVE('',#264625,#266524,#269045,.T.); +#269045 = LINE('',#269046,#269047); +#269046 = CARTESIAN_POINT('',(147.83165,-74.6031,-4.6E-02)); +#269047 = VECTOR('',#269048,1.); +#269048 = DIRECTION('',(0.,0.,1.)); +#269049 = ORIENTED_EDGE('',*,*,#266523,.F.); +#269050 = ORIENTED_EDGE('',*,*,#269044,.F.); +#269051 = CYLINDRICAL_SURFACE('',#269052,0.5); +#269052 = AXIS2_PLACEMENT_3D('',#269053,#269054,#269055); +#269053 = CARTESIAN_POINT('',(147.83165,-74.1031,-4.6E-02)); +#269054 = DIRECTION('',(-0.,-0.,-1.)); +#269055 = DIRECTION('',(-0.,-1.,0.)); +#269056 = ADVANCED_FACE('',(#269057),#269068,.F.); +#269057 = FACE_BOUND('',#269058,.T.); +#269058 = EDGE_LOOP('',(#269059,#269060,#269066,#269067)); +#269059 = ORIENTED_EDGE('',*,*,#264635,.T.); +#269060 = ORIENTED_EDGE('',*,*,#269061,.T.); +#269061 = EDGE_CURVE('',#264636,#266535,#269062,.T.); +#269062 = LINE('',#269063,#269064); +#269063 = CARTESIAN_POINT('',(107.19165,-56.8231,-4.6E-02)); +#269064 = VECTOR('',#269065,1.); +#269065 = DIRECTION('',(0.,0.,1.)); +#269066 = ORIENTED_EDGE('',*,*,#266534,.F.); +#269067 = ORIENTED_EDGE('',*,*,#269061,.F.); +#269068 = CYLINDRICAL_SURFACE('',#269069,0.5); +#269069 = AXIS2_PLACEMENT_3D('',#269070,#269071,#269072); +#269070 = CARTESIAN_POINT('',(107.19165,-56.3231,-4.6E-02)); +#269071 = DIRECTION('',(-0.,-0.,-1.)); +#269072 = DIRECTION('',(-0.,-1.,0.)); +#269073 = ADVANCED_FACE('',(#269074),#269085,.F.); +#269074 = FACE_BOUND('',#269075,.T.); +#269075 = EDGE_LOOP('',(#269076,#269077,#269083,#269084)); +#269076 = ORIENTED_EDGE('',*,*,#264646,.T.); +#269077 = ORIENTED_EDGE('',*,*,#269078,.T.); +#269078 = EDGE_CURVE('',#264647,#266546,#269079,.T.); +#269079 = LINE('',#269080,#269081); +#269080 = CARTESIAN_POINT('',(109.73165,-56.8231,-4.6E-02)); +#269081 = VECTOR('',#269082,1.); +#269082 = DIRECTION('',(0.,0.,1.)); +#269083 = ORIENTED_EDGE('',*,*,#266545,.F.); +#269084 = ORIENTED_EDGE('',*,*,#269078,.F.); +#269085 = CYLINDRICAL_SURFACE('',#269086,0.5); +#269086 = AXIS2_PLACEMENT_3D('',#269087,#269088,#269089); +#269087 = CARTESIAN_POINT('',(109.73165,-56.3231,-4.6E-02)); +#269088 = DIRECTION('',(-0.,-0.,-1.)); +#269089 = DIRECTION('',(-0.,-1.,0.)); +#269090 = ADVANCED_FACE('',(#269091),#269102,.F.); +#269091 = FACE_BOUND('',#269092,.T.); +#269092 = EDGE_LOOP('',(#269093,#269094,#269100,#269101)); +#269093 = ORIENTED_EDGE('',*,*,#264657,.T.); +#269094 = ORIENTED_EDGE('',*,*,#269095,.T.); +#269095 = EDGE_CURVE('',#264658,#266557,#269096,.T.); +#269096 = LINE('',#269097,#269098); +#269097 = CARTESIAN_POINT('',(112.27165,-56.8231,-4.6E-02)); +#269098 = VECTOR('',#269099,1.); +#269099 = DIRECTION('',(0.,0.,1.)); +#269100 = ORIENTED_EDGE('',*,*,#266556,.F.); +#269101 = ORIENTED_EDGE('',*,*,#269095,.F.); +#269102 = CYLINDRICAL_SURFACE('',#269103,0.5); +#269103 = AXIS2_PLACEMENT_3D('',#269104,#269105,#269106); +#269104 = CARTESIAN_POINT('',(112.27165,-56.3231,-4.6E-02)); +#269105 = DIRECTION('',(-0.,-0.,-1.)); +#269106 = DIRECTION('',(-0.,-1.,0.)); +#269107 = ADVANCED_FACE('',(#269108),#269119,.F.); +#269108 = FACE_BOUND('',#269109,.T.); +#269109 = EDGE_LOOP('',(#269110,#269111,#269117,#269118)); +#269110 = ORIENTED_EDGE('',*,*,#264668,.T.); +#269111 = ORIENTED_EDGE('',*,*,#269112,.T.); +#269112 = EDGE_CURVE('',#264669,#266568,#269113,.T.); +#269113 = LINE('',#269114,#269115); +#269114 = CARTESIAN_POINT('',(114.81165,-56.8231,-4.6E-02)); +#269115 = VECTOR('',#269116,1.); +#269116 = DIRECTION('',(0.,0.,1.)); +#269117 = ORIENTED_EDGE('',*,*,#266567,.F.); +#269118 = ORIENTED_EDGE('',*,*,#269112,.F.); +#269119 = CYLINDRICAL_SURFACE('',#269120,0.5); +#269120 = AXIS2_PLACEMENT_3D('',#269121,#269122,#269123); +#269121 = CARTESIAN_POINT('',(114.81165,-56.3231,-4.6E-02)); +#269122 = DIRECTION('',(-0.,-0.,-1.)); +#269123 = DIRECTION('',(-0.,-1.,0.)); +#269124 = ADVANCED_FACE('',(#269125),#269136,.F.); +#269125 = FACE_BOUND('',#269126,.T.); +#269126 = EDGE_LOOP('',(#269127,#269128,#269134,#269135)); +#269127 = ORIENTED_EDGE('',*,*,#264679,.T.); +#269128 = ORIENTED_EDGE('',*,*,#269129,.T.); +#269129 = EDGE_CURVE('',#264680,#266579,#269130,.T.); +#269130 = LINE('',#269131,#269132); +#269131 = CARTESIAN_POINT('',(85.19165,-46.9231,-4.6E-02)); +#269132 = VECTOR('',#269133,1.); +#269133 = DIRECTION('',(0.,0.,1.)); +#269134 = ORIENTED_EDGE('',*,*,#266578,.F.); +#269135 = ORIENTED_EDGE('',*,*,#269129,.F.); +#269136 = CYLINDRICAL_SURFACE('',#269137,1.6); +#269137 = AXIS2_PLACEMENT_3D('',#269138,#269139,#269140); +#269138 = CARTESIAN_POINT('',(85.19165,-45.3231,-4.6E-02)); +#269139 = DIRECTION('',(-0.,-0.,-1.)); +#269140 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#269141 = ADVANCED_FACE('',(#269142),#269153,.F.); +#269142 = FACE_BOUND('',#269143,.T.); +#269143 = EDGE_LOOP('',(#269144,#269145,#269151,#269152)); +#269144 = ORIENTED_EDGE('',*,*,#264690,.T.); +#269145 = ORIENTED_EDGE('',*,*,#269146,.T.); +#269146 = EDGE_CURVE('',#264691,#266590,#269147,.T.); +#269147 = LINE('',#269148,#269149); +#269148 = CARTESIAN_POINT('',(98.19165,-46.7981,-4.6E-02)); +#269149 = VECTOR('',#269150,1.); +#269150 = DIRECTION('',(0.,0.,1.)); +#269151 = ORIENTED_EDGE('',*,*,#266589,.F.); +#269152 = ORIENTED_EDGE('',*,*,#269146,.F.); +#269153 = CYLINDRICAL_SURFACE('',#269154,0.475); +#269154 = AXIS2_PLACEMENT_3D('',#269155,#269156,#269157); +#269155 = CARTESIAN_POINT('',(98.19165,-46.3231,-4.6E-02)); +#269156 = DIRECTION('',(-0.,-0.,-1.)); +#269157 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269158 = ADVANCED_FACE('',(#269159),#269170,.F.); +#269159 = FACE_BOUND('',#269160,.T.); +#269160 = EDGE_LOOP('',(#269161,#269162,#269168,#269169)); +#269161 = ORIENTED_EDGE('',*,*,#264701,.T.); +#269162 = ORIENTED_EDGE('',*,*,#269163,.T.); +#269163 = EDGE_CURVE('',#264702,#266601,#269164,.T.); +#269164 = LINE('',#269165,#269166); +#269165 = CARTESIAN_POINT('',(111.19165,-51.9031,-4.6E-02)); +#269166 = VECTOR('',#269167,1.); +#269167 = DIRECTION('',(0.,0.,1.)); +#269168 = ORIENTED_EDGE('',*,*,#266600,.F.); +#269169 = ORIENTED_EDGE('',*,*,#269163,.F.); +#269170 = CYLINDRICAL_SURFACE('',#269171,0.5); +#269171 = AXIS2_PLACEMENT_3D('',#269172,#269173,#269174); +#269172 = CARTESIAN_POINT('',(111.19165,-51.4031,-4.6E-02)); +#269173 = DIRECTION('',(-0.,-0.,-1.)); +#269174 = DIRECTION('',(-0.,-1.,0.)); +#269175 = ADVANCED_FACE('',(#269176),#269187,.F.); +#269176 = FACE_BOUND('',#269177,.T.); +#269177 = EDGE_LOOP('',(#269178,#269179,#269185,#269186)); +#269178 = ORIENTED_EDGE('',*,*,#264712,.T.); +#269179 = ORIENTED_EDGE('',*,*,#269180,.T.); +#269180 = EDGE_CURVE('',#264713,#266612,#269181,.T.); +#269181 = LINE('',#269182,#269183); +#269182 = CARTESIAN_POINT('',(100.69165,-46.7981,-4.6E-02)); +#269183 = VECTOR('',#269184,1.); +#269184 = DIRECTION('',(0.,0.,1.)); +#269185 = ORIENTED_EDGE('',*,*,#266611,.F.); +#269186 = ORIENTED_EDGE('',*,*,#269180,.F.); +#269187 = CYLINDRICAL_SURFACE('',#269188,0.475); +#269188 = AXIS2_PLACEMENT_3D('',#269189,#269190,#269191); +#269189 = CARTESIAN_POINT('',(100.69165,-46.3231,-4.6E-02)); +#269190 = DIRECTION('',(-0.,-0.,-1.)); +#269191 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269192 = ADVANCED_FACE('',(#269193),#269204,.F.); +#269193 = FACE_BOUND('',#269194,.T.); +#269194 = EDGE_LOOP('',(#269195,#269196,#269202,#269203)); +#269195 = ORIENTED_EDGE('',*,*,#264723,.T.); +#269196 = ORIENTED_EDGE('',*,*,#269197,.T.); +#269197 = EDGE_CURVE('',#264724,#266623,#269198,.T.); +#269198 = LINE('',#269199,#269200); +#269199 = CARTESIAN_POINT('',(103.19165,-46.7981,-4.6E-02)); +#269200 = VECTOR('',#269201,1.); +#269201 = DIRECTION('',(0.,0.,1.)); +#269202 = ORIENTED_EDGE('',*,*,#266622,.F.); +#269203 = ORIENTED_EDGE('',*,*,#269197,.F.); +#269204 = CYLINDRICAL_SURFACE('',#269205,0.475); +#269205 = AXIS2_PLACEMENT_3D('',#269206,#269207,#269208); +#269206 = CARTESIAN_POINT('',(103.19165,-46.3231,-4.6E-02)); +#269207 = DIRECTION('',(-0.,-0.,-1.)); +#269208 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269209 = ADVANCED_FACE('',(#269210),#269221,.F.); +#269210 = FACE_BOUND('',#269211,.T.); +#269211 = EDGE_LOOP('',(#269212,#269213,#269219,#269220)); +#269212 = ORIENTED_EDGE('',*,*,#264734,.T.); +#269213 = ORIENTED_EDGE('',*,*,#269214,.T.); +#269214 = EDGE_CURVE('',#264735,#266634,#269215,.T.); +#269215 = LINE('',#269216,#269217); +#269216 = CARTESIAN_POINT('',(105.69165,-46.7981,-4.6E-02)); +#269217 = VECTOR('',#269218,1.); +#269218 = DIRECTION('',(0.,0.,1.)); +#269219 = ORIENTED_EDGE('',*,*,#266633,.F.); +#269220 = ORIENTED_EDGE('',*,*,#269214,.F.); +#269221 = CYLINDRICAL_SURFACE('',#269222,0.475); +#269222 = AXIS2_PLACEMENT_3D('',#269223,#269224,#269225); +#269223 = CARTESIAN_POINT('',(105.69165,-46.3231,-4.6E-02)); +#269224 = DIRECTION('',(-0.,-0.,-1.)); +#269225 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269226 = ADVANCED_FACE('',(#269227),#269238,.F.); +#269227 = FACE_BOUND('',#269228,.T.); +#269228 = EDGE_LOOP('',(#269229,#269230,#269236,#269237)); +#269229 = ORIENTED_EDGE('',*,*,#264745,.T.); +#269230 = ORIENTED_EDGE('',*,*,#269231,.T.); +#269231 = EDGE_CURVE('',#264746,#266645,#269232,.T.); +#269232 = LINE('',#269233,#269234); +#269233 = CARTESIAN_POINT('',(111.19165,-49.3631,-4.6E-02)); +#269234 = VECTOR('',#269235,1.); +#269235 = DIRECTION('',(0.,0.,1.)); +#269236 = ORIENTED_EDGE('',*,*,#266644,.F.); +#269237 = ORIENTED_EDGE('',*,*,#269231,.F.); +#269238 = CYLINDRICAL_SURFACE('',#269239,0.5); +#269239 = AXIS2_PLACEMENT_3D('',#269240,#269241,#269242); +#269240 = CARTESIAN_POINT('',(111.19165,-48.8631,-4.6E-02)); +#269241 = DIRECTION('',(-0.,-0.,-1.)); +#269242 = DIRECTION('',(-0.,-1.,0.)); +#269243 = ADVANCED_FACE('',(#269244),#269255,.F.); +#269244 = FACE_BOUND('',#269245,.T.); +#269245 = EDGE_LOOP('',(#269246,#269247,#269253,#269254)); +#269246 = ORIENTED_EDGE('',*,*,#264756,.T.); +#269247 = ORIENTED_EDGE('',*,*,#269248,.T.); +#269248 = EDGE_CURVE('',#264757,#266656,#269249,.T.); +#269249 = LINE('',#269250,#269251); +#269250 = CARTESIAN_POINT('',(111.19165,-46.8231,-4.6E-02)); +#269251 = VECTOR('',#269252,1.); +#269252 = DIRECTION('',(0.,0.,1.)); +#269253 = ORIENTED_EDGE('',*,*,#266655,.F.); +#269254 = ORIENTED_EDGE('',*,*,#269248,.F.); +#269255 = CYLINDRICAL_SURFACE('',#269256,0.5); +#269256 = AXIS2_PLACEMENT_3D('',#269257,#269258,#269259); +#269257 = CARTESIAN_POINT('',(111.19165,-46.3231,-4.6E-02)); +#269258 = DIRECTION('',(-0.,-0.,-1.)); +#269259 = DIRECTION('',(-0.,-1.,0.)); +#269260 = ADVANCED_FACE('',(#269261),#269272,.F.); +#269261 = FACE_BOUND('',#269262,.T.); +#269262 = EDGE_LOOP('',(#269263,#269264,#269270,#269271)); +#269263 = ORIENTED_EDGE('',*,*,#264767,.T.); +#269264 = ORIENTED_EDGE('',*,*,#269265,.T.); +#269265 = EDGE_CURVE('',#264768,#266667,#269266,.T.); +#269266 = LINE('',#269267,#269268); +#269267 = CARTESIAN_POINT('',(117.35165,-56.8231,-4.6E-02)); +#269268 = VECTOR('',#269269,1.); +#269269 = DIRECTION('',(0.,0.,1.)); +#269270 = ORIENTED_EDGE('',*,*,#266666,.F.); +#269271 = ORIENTED_EDGE('',*,*,#269265,.F.); +#269272 = CYLINDRICAL_SURFACE('',#269273,0.5); +#269273 = AXIS2_PLACEMENT_3D('',#269274,#269275,#269276); +#269274 = CARTESIAN_POINT('',(117.35165,-56.3231,-4.6E-02)); +#269275 = DIRECTION('',(-0.,-0.,-1.)); +#269276 = DIRECTION('',(-0.,-1.,0.)); +#269277 = ADVANCED_FACE('',(#269278),#269289,.F.); +#269278 = FACE_BOUND('',#269279,.T.); +#269279 = EDGE_LOOP('',(#269280,#269281,#269287,#269288)); +#269280 = ORIENTED_EDGE('',*,*,#264778,.T.); +#269281 = ORIENTED_EDGE('',*,*,#269282,.T.); +#269282 = EDGE_CURVE('',#264779,#266678,#269283,.T.); +#269283 = LINE('',#269284,#269285); +#269284 = CARTESIAN_POINT('',(119.89165,-56.8231,-4.6E-02)); +#269285 = VECTOR('',#269286,1.); +#269286 = DIRECTION('',(0.,0.,1.)); +#269287 = ORIENTED_EDGE('',*,*,#266677,.F.); +#269288 = ORIENTED_EDGE('',*,*,#269282,.F.); +#269289 = CYLINDRICAL_SURFACE('',#269290,0.5); +#269290 = AXIS2_PLACEMENT_3D('',#269291,#269292,#269293); +#269291 = CARTESIAN_POINT('',(119.89165,-56.3231,-4.6E-02)); +#269292 = DIRECTION('',(-0.,-0.,-1.)); +#269293 = DIRECTION('',(-0.,-1.,0.)); +#269294 = ADVANCED_FACE('',(#269295),#269306,.F.); +#269295 = FACE_BOUND('',#269296,.T.); +#269296 = EDGE_LOOP('',(#269297,#269298,#269304,#269305)); +#269297 = ORIENTED_EDGE('',*,*,#264789,.T.); +#269298 = ORIENTED_EDGE('',*,*,#269299,.T.); +#269299 = EDGE_CURVE('',#264790,#266689,#269300,.T.); +#269300 = LINE('',#269301,#269302); +#269301 = CARTESIAN_POINT('',(122.43165,-56.8231,-4.6E-02)); +#269302 = VECTOR('',#269303,1.); +#269303 = DIRECTION('',(0.,0.,1.)); +#269304 = ORIENTED_EDGE('',*,*,#266688,.F.); +#269305 = ORIENTED_EDGE('',*,*,#269299,.F.); +#269306 = CYLINDRICAL_SURFACE('',#269307,0.5); +#269307 = AXIS2_PLACEMENT_3D('',#269308,#269309,#269310); +#269308 = CARTESIAN_POINT('',(122.43165,-56.3231,-4.6E-02)); +#269309 = DIRECTION('',(-0.,-0.,-1.)); +#269310 = DIRECTION('',(-0.,-1.,0.)); +#269311 = ADVANCED_FACE('',(#269312),#269323,.F.); +#269312 = FACE_BOUND('',#269313,.T.); +#269313 = EDGE_LOOP('',(#269314,#269315,#269321,#269322)); +#269314 = ORIENTED_EDGE('',*,*,#264800,.T.); +#269315 = ORIENTED_EDGE('',*,*,#269316,.T.); +#269316 = EDGE_CURVE('',#264801,#266700,#269317,.T.); +#269317 = LINE('',#269318,#269319); +#269318 = CARTESIAN_POINT('',(124.97165,-56.8231,-4.6E-02)); +#269319 = VECTOR('',#269320,1.); +#269320 = DIRECTION('',(0.,0.,1.)); +#269321 = ORIENTED_EDGE('',*,*,#266699,.F.); +#269322 = ORIENTED_EDGE('',*,*,#269316,.F.); +#269323 = CYLINDRICAL_SURFACE('',#269324,0.5); +#269324 = AXIS2_PLACEMENT_3D('',#269325,#269326,#269327); +#269325 = CARTESIAN_POINT('',(124.97165,-56.3231,-4.6E-02)); +#269326 = DIRECTION('',(-0.,-0.,-1.)); +#269327 = DIRECTION('',(-0.,-1.,0.)); +#269328 = ADVANCED_FACE('',(#269329),#269340,.F.); +#269329 = FACE_BOUND('',#269330,.T.); +#269330 = EDGE_LOOP('',(#269331,#269332,#269338,#269339)); +#269331 = ORIENTED_EDGE('',*,*,#264811,.T.); +#269332 = ORIENTED_EDGE('',*,*,#269333,.T.); +#269333 = EDGE_CURVE('',#264812,#266711,#269334,.T.); +#269334 = LINE('',#269335,#269336); +#269335 = CARTESIAN_POINT('',(127.51165,-56.8231,-4.6E-02)); +#269336 = VECTOR('',#269337,1.); +#269337 = DIRECTION('',(0.,0.,1.)); +#269338 = ORIENTED_EDGE('',*,*,#266710,.F.); +#269339 = ORIENTED_EDGE('',*,*,#269333,.F.); +#269340 = CYLINDRICAL_SURFACE('',#269341,0.5); +#269341 = AXIS2_PLACEMENT_3D('',#269342,#269343,#269344); +#269342 = CARTESIAN_POINT('',(127.51165,-56.3231,-4.6E-02)); +#269343 = DIRECTION('',(-0.,-0.,-1.)); +#269344 = DIRECTION('',(-0.,-1.,0.)); +#269345 = ADVANCED_FACE('',(#269346),#269357,.F.); +#269346 = FACE_BOUND('',#269347,.T.); +#269347 = EDGE_LOOP('',(#269348,#269349,#269355,#269356)); +#269348 = ORIENTED_EDGE('',*,*,#264822,.T.); +#269349 = ORIENTED_EDGE('',*,*,#269350,.T.); +#269350 = EDGE_CURVE('',#264823,#266722,#269351,.T.); +#269351 = LINE('',#269352,#269353); +#269352 = CARTESIAN_POINT('',(130.05165,-56.8231,-4.6E-02)); +#269353 = VECTOR('',#269354,1.); +#269354 = DIRECTION('',(0.,0.,1.)); +#269355 = ORIENTED_EDGE('',*,*,#266721,.F.); +#269356 = ORIENTED_EDGE('',*,*,#269350,.F.); +#269357 = CYLINDRICAL_SURFACE('',#269358,0.5); +#269358 = AXIS2_PLACEMENT_3D('',#269359,#269360,#269361); +#269359 = CARTESIAN_POINT('',(130.05165,-56.3231,-4.6E-02)); +#269360 = DIRECTION('',(-0.,-0.,-1.)); +#269361 = DIRECTION('',(-0.,-1.,0.)); +#269362 = ADVANCED_FACE('',(#269363),#269374,.F.); +#269363 = FACE_BOUND('',#269364,.T.); +#269364 = EDGE_LOOP('',(#269365,#269366,#269372,#269373)); +#269365 = ORIENTED_EDGE('',*,*,#264833,.T.); +#269366 = ORIENTED_EDGE('',*,*,#269367,.T.); +#269367 = EDGE_CURVE('',#264834,#266733,#269368,.T.); +#269368 = LINE('',#269369,#269370); +#269369 = CARTESIAN_POINT('',(132.59165,-56.8231,-4.6E-02)); +#269370 = VECTOR('',#269371,1.); +#269371 = DIRECTION('',(0.,0.,1.)); +#269372 = ORIENTED_EDGE('',*,*,#266732,.F.); +#269373 = ORIENTED_EDGE('',*,*,#269367,.F.); +#269374 = CYLINDRICAL_SURFACE('',#269375,0.5); +#269375 = AXIS2_PLACEMENT_3D('',#269376,#269377,#269378); +#269376 = CARTESIAN_POINT('',(132.59165,-56.3231,-4.6E-02)); +#269377 = DIRECTION('',(-0.,-0.,-1.)); +#269378 = DIRECTION('',(-0.,-1.,0.)); +#269379 = ADVANCED_FACE('',(#269380),#269391,.F.); +#269380 = FACE_BOUND('',#269381,.T.); +#269381 = EDGE_LOOP('',(#269382,#269383,#269389,#269390)); +#269382 = ORIENTED_EDGE('',*,*,#264844,.T.); +#269383 = ORIENTED_EDGE('',*,*,#269384,.T.); +#269384 = EDGE_CURVE('',#264845,#266744,#269385,.T.); +#269385 = LINE('',#269386,#269387); +#269386 = CARTESIAN_POINT('',(135.13165,-56.8231,-4.6E-02)); +#269387 = VECTOR('',#269388,1.); +#269388 = DIRECTION('',(0.,0.,1.)); +#269389 = ORIENTED_EDGE('',*,*,#266743,.F.); +#269390 = ORIENTED_EDGE('',*,*,#269384,.F.); +#269391 = CYLINDRICAL_SURFACE('',#269392,0.5); +#269392 = AXIS2_PLACEMENT_3D('',#269393,#269394,#269395); +#269393 = CARTESIAN_POINT('',(135.13165,-56.3231,-4.6E-02)); +#269394 = DIRECTION('',(-0.,-0.,-1.)); +#269395 = DIRECTION('',(-0.,-1.,0.)); +#269396 = ADVANCED_FACE('',(#269397),#269408,.F.); +#269397 = FACE_BOUND('',#269398,.T.); +#269398 = EDGE_LOOP('',(#269399,#269400,#269406,#269407)); +#269399 = ORIENTED_EDGE('',*,*,#264855,.T.); +#269400 = ORIENTED_EDGE('',*,*,#269401,.T.); +#269401 = EDGE_CURVE('',#264856,#266755,#269402,.T.); +#269402 = LINE('',#269403,#269404); +#269403 = CARTESIAN_POINT('',(137.67165,-56.8231,-4.6E-02)); +#269404 = VECTOR('',#269405,1.); +#269405 = DIRECTION('',(0.,0.,1.)); +#269406 = ORIENTED_EDGE('',*,*,#266754,.F.); +#269407 = ORIENTED_EDGE('',*,*,#269401,.F.); +#269408 = CYLINDRICAL_SURFACE('',#269409,0.5); +#269409 = AXIS2_PLACEMENT_3D('',#269410,#269411,#269412); +#269410 = CARTESIAN_POINT('',(137.67165,-56.3231,-4.6E-02)); +#269411 = DIRECTION('',(-0.,-0.,-1.)); +#269412 = DIRECTION('',(-0.,-1.,0.)); +#269413 = ADVANCED_FACE('',(#269414),#269425,.F.); +#269414 = FACE_BOUND('',#269415,.T.); +#269415 = EDGE_LOOP('',(#269416,#269417,#269423,#269424)); +#269416 = ORIENTED_EDGE('',*,*,#264866,.T.); +#269417 = ORIENTED_EDGE('',*,*,#269418,.T.); +#269418 = EDGE_CURVE('',#264867,#266766,#269419,.T.); +#269419 = LINE('',#269420,#269421); +#269420 = CARTESIAN_POINT('',(140.21165,-56.8231,-4.6E-02)); +#269421 = VECTOR('',#269422,1.); +#269422 = DIRECTION('',(0.,0.,1.)); +#269423 = ORIENTED_EDGE('',*,*,#266765,.F.); +#269424 = ORIENTED_EDGE('',*,*,#269418,.F.); +#269425 = CYLINDRICAL_SURFACE('',#269426,0.5); +#269426 = AXIS2_PLACEMENT_3D('',#269427,#269428,#269429); +#269427 = CARTESIAN_POINT('',(140.21165,-56.3231,-4.6E-02)); +#269428 = DIRECTION('',(-0.,-0.,-1.)); +#269429 = DIRECTION('',(-0.,-1.,0.)); +#269430 = ADVANCED_FACE('',(#269431),#269442,.F.); +#269431 = FACE_BOUND('',#269432,.T.); +#269432 = EDGE_LOOP('',(#269433,#269434,#269440,#269441)); +#269433 = ORIENTED_EDGE('',*,*,#264877,.T.); +#269434 = ORIENTED_EDGE('',*,*,#269435,.T.); +#269435 = EDGE_CURVE('',#264878,#266777,#269436,.T.); +#269436 = LINE('',#269437,#269438); +#269437 = CARTESIAN_POINT('',(142.75165,-56.8231,-4.6E-02)); +#269438 = VECTOR('',#269439,1.); +#269439 = DIRECTION('',(0.,0.,1.)); +#269440 = ORIENTED_EDGE('',*,*,#266776,.F.); +#269441 = ORIENTED_EDGE('',*,*,#269435,.F.); +#269442 = CYLINDRICAL_SURFACE('',#269443,0.5); +#269443 = AXIS2_PLACEMENT_3D('',#269444,#269445,#269446); +#269444 = CARTESIAN_POINT('',(142.75165,-56.3231,-4.6E-02)); +#269445 = DIRECTION('',(-0.,-0.,-1.)); +#269446 = DIRECTION('',(-0.,-1.,0.)); +#269447 = ADVANCED_FACE('',(#269448),#269459,.F.); +#269448 = FACE_BOUND('',#269449,.T.); +#269449 = EDGE_LOOP('',(#269450,#269451,#269457,#269458)); +#269450 = ORIENTED_EDGE('',*,*,#264888,.T.); +#269451 = ORIENTED_EDGE('',*,*,#269452,.T.); +#269452 = EDGE_CURVE('',#264889,#266788,#269453,.T.); +#269453 = LINE('',#269454,#269455); +#269454 = CARTESIAN_POINT('',(145.29165,-56.8231,-4.6E-02)); +#269455 = VECTOR('',#269456,1.); +#269456 = DIRECTION('',(0.,0.,1.)); +#269457 = ORIENTED_EDGE('',*,*,#266787,.F.); +#269458 = ORIENTED_EDGE('',*,*,#269452,.F.); +#269459 = CYLINDRICAL_SURFACE('',#269460,0.5); +#269460 = AXIS2_PLACEMENT_3D('',#269461,#269462,#269463); +#269461 = CARTESIAN_POINT('',(145.29165,-56.3231,-4.6E-02)); +#269462 = DIRECTION('',(-0.,-0.,-1.)); +#269463 = DIRECTION('',(-0.,-1.,0.)); +#269464 = ADVANCED_FACE('',(#269465),#269476,.F.); +#269465 = FACE_BOUND('',#269466,.T.); +#269466 = EDGE_LOOP('',(#269467,#269468,#269474,#269475)); +#269467 = ORIENTED_EDGE('',*,*,#264899,.T.); +#269468 = ORIENTED_EDGE('',*,*,#269469,.T.); +#269469 = EDGE_CURVE('',#264900,#266799,#269470,.T.); +#269470 = LINE('',#269471,#269472); +#269471 = CARTESIAN_POINT('',(147.83165,-56.8231,-4.6E-02)); +#269472 = VECTOR('',#269473,1.); +#269473 = DIRECTION('',(0.,0.,1.)); +#269474 = ORIENTED_EDGE('',*,*,#266798,.F.); +#269475 = ORIENTED_EDGE('',*,*,#269469,.F.); +#269476 = CYLINDRICAL_SURFACE('',#269477,0.5); +#269477 = AXIS2_PLACEMENT_3D('',#269478,#269479,#269480); +#269478 = CARTESIAN_POINT('',(147.83165,-56.3231,-4.6E-02)); +#269479 = DIRECTION('',(-0.,-0.,-1.)); +#269480 = DIRECTION('',(-0.,-1.,0.)); +#269481 = ADVANCED_FACE('',(#269482),#269493,.F.); +#269482 = FACE_BOUND('',#269483,.T.); +#269483 = EDGE_LOOP('',(#269484,#269485,#269491,#269492)); +#269484 = ORIENTED_EDGE('',*,*,#264910,.T.); +#269485 = ORIENTED_EDGE('',*,*,#269486,.T.); +#269486 = EDGE_CURVE('',#264911,#266810,#269487,.T.); +#269487 = LINE('',#269488,#269489); +#269488 = CARTESIAN_POINT('',(116.19165,-46.7981,-4.6E-02)); +#269489 = VECTOR('',#269490,1.); +#269490 = DIRECTION('',(0.,0.,1.)); +#269491 = ORIENTED_EDGE('',*,*,#266809,.F.); +#269492 = ORIENTED_EDGE('',*,*,#269486,.F.); +#269493 = CYLINDRICAL_SURFACE('',#269494,0.475); +#269494 = AXIS2_PLACEMENT_3D('',#269495,#269496,#269497); +#269495 = CARTESIAN_POINT('',(116.19165,-46.3231,-4.6E-02)); +#269496 = DIRECTION('',(-0.,-0.,-1.)); +#269497 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269498 = ADVANCED_FACE('',(#269499),#269510,.F.); +#269499 = FACE_BOUND('',#269500,.T.); +#269500 = EDGE_LOOP('',(#269501,#269502,#269508,#269509)); +#269501 = ORIENTED_EDGE('',*,*,#264921,.T.); +#269502 = ORIENTED_EDGE('',*,*,#269503,.T.); +#269503 = EDGE_CURVE('',#264922,#266821,#269504,.T.); +#269504 = LINE('',#269505,#269506); +#269505 = CARTESIAN_POINT('',(118.69165,-46.7981,-4.6E-02)); +#269506 = VECTOR('',#269507,1.); +#269507 = DIRECTION('',(0.,0.,1.)); +#269508 = ORIENTED_EDGE('',*,*,#266820,.F.); +#269509 = ORIENTED_EDGE('',*,*,#269503,.F.); +#269510 = CYLINDRICAL_SURFACE('',#269511,0.475); +#269511 = AXIS2_PLACEMENT_3D('',#269512,#269513,#269514); +#269512 = CARTESIAN_POINT('',(118.69165,-46.3231,-4.6E-02)); +#269513 = DIRECTION('',(-0.,-0.,-1.)); +#269514 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269515 = ADVANCED_FACE('',(#269516),#269527,.F.); +#269516 = FACE_BOUND('',#269517,.T.); +#269517 = EDGE_LOOP('',(#269518,#269519,#269525,#269526)); +#269518 = ORIENTED_EDGE('',*,*,#264932,.T.); +#269519 = ORIENTED_EDGE('',*,*,#269520,.T.); +#269520 = EDGE_CURVE('',#264933,#266832,#269521,.T.); +#269521 = LINE('',#269522,#269523); +#269522 = CARTESIAN_POINT('',(121.19165,-46.7981,-4.6E-02)); +#269523 = VECTOR('',#269524,1.); +#269524 = DIRECTION('',(0.,0.,1.)); +#269525 = ORIENTED_EDGE('',*,*,#266831,.F.); +#269526 = ORIENTED_EDGE('',*,*,#269520,.F.); +#269527 = CYLINDRICAL_SURFACE('',#269528,0.475); +#269528 = AXIS2_PLACEMENT_3D('',#269529,#269530,#269531); +#269529 = CARTESIAN_POINT('',(121.19165,-46.3231,-4.6E-02)); +#269530 = DIRECTION('',(-0.,-0.,-1.)); +#269531 = DIRECTION('',(-2.991758887411E-14,-1.,0.)); +#269532 = ADVANCED_FACE('',(#269533),#269544,.F.); +#269533 = FACE_BOUND('',#269534,.T.); +#269534 = EDGE_LOOP('',(#269535,#269536,#269542,#269543)); +#269535 = ORIENTED_EDGE('',*,*,#264943,.T.); +#269536 = ORIENTED_EDGE('',*,*,#269537,.T.); +#269537 = EDGE_CURVE('',#264944,#266843,#269538,.T.); +#269538 = LINE('',#269539,#269540); +#269539 = CARTESIAN_POINT('',(127.19165,-46.8231,-4.6E-02)); +#269540 = VECTOR('',#269541,1.); +#269541 = DIRECTION('',(0.,0.,1.)); +#269542 = ORIENTED_EDGE('',*,*,#266842,.F.); +#269543 = ORIENTED_EDGE('',*,*,#269537,.F.); +#269544 = CYLINDRICAL_SURFACE('',#269545,0.5); +#269545 = AXIS2_PLACEMENT_3D('',#269546,#269547,#269548); +#269546 = CARTESIAN_POINT('',(127.19165,-46.3231,-4.6E-02)); +#269547 = DIRECTION('',(-0.,-0.,-1.)); +#269548 = DIRECTION('',(-0.,-1.,0.)); +#269549 = ADVANCED_FACE('',(#269550),#269561,.F.); +#269550 = FACE_BOUND('',#269551,.T.); +#269551 = EDGE_LOOP('',(#269552,#269553,#269559,#269560)); +#269552 = ORIENTED_EDGE('',*,*,#264954,.T.); +#269553 = ORIENTED_EDGE('',*,*,#269554,.T.); +#269554 = EDGE_CURVE('',#264955,#266854,#269555,.T.); +#269555 = LINE('',#269556,#269557); +#269556 = CARTESIAN_POINT('',(129.69165,-46.8231,-4.6E-02)); +#269557 = VECTOR('',#269558,1.); +#269558 = DIRECTION('',(0.,0.,1.)); +#269559 = ORIENTED_EDGE('',*,*,#266853,.F.); +#269560 = ORIENTED_EDGE('',*,*,#269554,.F.); +#269561 = CYLINDRICAL_SURFACE('',#269562,0.5); +#269562 = AXIS2_PLACEMENT_3D('',#269563,#269564,#269565); +#269563 = CARTESIAN_POINT('',(129.69165,-46.3231,-4.6E-02)); +#269564 = DIRECTION('',(-0.,-0.,-1.)); +#269565 = DIRECTION('',(-0.,-1.,0.)); +#269566 = ADVANCED_FACE('',(#269567),#269578,.F.); +#269567 = FACE_BOUND('',#269568,.T.); +#269568 = EDGE_LOOP('',(#269569,#269570,#269576,#269577)); +#269569 = ORIENTED_EDGE('',*,*,#264965,.T.); +#269570 = ORIENTED_EDGE('',*,*,#269571,.T.); +#269571 = EDGE_CURVE('',#264966,#266865,#269572,.T.); +#269572 = LINE('',#269573,#269574); +#269573 = CARTESIAN_POINT('',(135.79165,-46.8231,-4.6E-02)); +#269574 = VECTOR('',#269575,1.); +#269575 = DIRECTION('',(0.,0.,1.)); +#269576 = ORIENTED_EDGE('',*,*,#266864,.F.); +#269577 = ORIENTED_EDGE('',*,*,#269571,.F.); +#269578 = CYLINDRICAL_SURFACE('',#269579,0.5); +#269579 = AXIS2_PLACEMENT_3D('',#269580,#269581,#269582); +#269580 = CARTESIAN_POINT('',(135.79165,-46.3231,-4.6E-02)); +#269581 = DIRECTION('',(-0.,-0.,-1.)); +#269582 = DIRECTION('',(-0.,-1.,0.)); +#269583 = ADVANCED_FACE('',(#269584),#269595,.F.); +#269584 = FACE_BOUND('',#269585,.T.); +#269585 = EDGE_LOOP('',(#269586,#269587,#269593,#269594)); +#269586 = ORIENTED_EDGE('',*,*,#264976,.T.); +#269587 = ORIENTED_EDGE('',*,*,#269588,.T.); +#269588 = EDGE_CURVE('',#264977,#266876,#269589,.T.); +#269589 = LINE('',#269590,#269591); +#269590 = CARTESIAN_POINT('',(138.29165,-46.8231,-4.6E-02)); +#269591 = VECTOR('',#269592,1.); +#269592 = DIRECTION('',(0.,0.,1.)); +#269593 = ORIENTED_EDGE('',*,*,#266875,.F.); +#269594 = ORIENTED_EDGE('',*,*,#269588,.F.); +#269595 = CYLINDRICAL_SURFACE('',#269596,0.5); +#269596 = AXIS2_PLACEMENT_3D('',#269597,#269598,#269599); +#269597 = CARTESIAN_POINT('',(138.29165,-46.3231,-4.6E-02)); +#269598 = DIRECTION('',(-0.,-0.,-1.)); +#269599 = DIRECTION('',(-0.,-1.,0.)); +#269600 = ADVANCED_FACE('',(#269601),#269612,.F.); +#269601 = FACE_BOUND('',#269602,.T.); +#269602 = EDGE_LOOP('',(#269603,#269604,#269610,#269611)); +#269603 = ORIENTED_EDGE('',*,*,#264987,.T.); +#269604 = ORIENTED_EDGE('',*,*,#269605,.T.); +#269605 = EDGE_CURVE('',#264988,#266887,#269606,.T.); +#269606 = LINE('',#269607,#269608); +#269607 = CARTESIAN_POINT('',(148.27165,-81.8231,-4.6E-02)); +#269608 = VECTOR('',#269609,1.); +#269609 = DIRECTION('',(0.,0.,1.)); +#269610 = ORIENTED_EDGE('',*,*,#266886,.F.); +#269611 = ORIENTED_EDGE('',*,*,#269605,.F.); +#269612 = CYLINDRICAL_SURFACE('',#269613,0.5); +#269613 = AXIS2_PLACEMENT_3D('',#269614,#269615,#269616); +#269614 = CARTESIAN_POINT('',(148.27165,-81.3231,-4.6E-02)); +#269615 = DIRECTION('',(-0.,-0.,-1.)); +#269616 = DIRECTION('',(-0.,-1.,0.)); +#269617 = ADVANCED_FACE('',(#269618),#269629,.F.); +#269618 = FACE_BOUND('',#269619,.T.); +#269619 = EDGE_LOOP('',(#269620,#269621,#269627,#269628)); +#269620 = ORIENTED_EDGE('',*,*,#264998,.T.); +#269621 = ORIENTED_EDGE('',*,*,#269622,.T.); +#269622 = EDGE_CURVE('',#264999,#266898,#269623,.T.); +#269623 = LINE('',#269624,#269625); +#269624 = CARTESIAN_POINT('',(150.81165,-81.8231,-4.6E-02)); +#269625 = VECTOR('',#269626,1.); +#269626 = DIRECTION('',(0.,0.,1.)); +#269627 = ORIENTED_EDGE('',*,*,#266897,.F.); +#269628 = ORIENTED_EDGE('',*,*,#269622,.F.); +#269629 = CYLINDRICAL_SURFACE('',#269630,0.5); +#269630 = AXIS2_PLACEMENT_3D('',#269631,#269632,#269633); +#269631 = CARTESIAN_POINT('',(150.81165,-81.3231,-4.6E-02)); +#269632 = DIRECTION('',(-0.,-0.,-1.)); +#269633 = DIRECTION('',(-0.,-1.,0.)); +#269634 = ADVANCED_FACE('',(#269635),#269646,.F.); +#269635 = FACE_BOUND('',#269636,.T.); +#269636 = EDGE_LOOP('',(#269637,#269638,#269644,#269645)); +#269637 = ORIENTED_EDGE('',*,*,#265009,.T.); +#269638 = ORIENTED_EDGE('',*,*,#269639,.T.); +#269639 = EDGE_CURVE('',#265010,#266909,#269640,.T.); +#269640 = LINE('',#269641,#269642); +#269641 = CARTESIAN_POINT('',(174.19165,-91.2231,-4.6E-02)); +#269642 = VECTOR('',#269643,1.); +#269643 = DIRECTION('',(0.,0.,1.)); +#269644 = ORIENTED_EDGE('',*,*,#266908,.F.); +#269645 = ORIENTED_EDGE('',*,*,#269639,.F.); +#269646 = CYLINDRICAL_SURFACE('',#269647,0.4); +#269647 = AXIS2_PLACEMENT_3D('',#269648,#269649,#269650); +#269648 = CARTESIAN_POINT('',(174.19165,-90.8231,-4.6E-02)); +#269649 = DIRECTION('',(-0.,0.,-1.)); +#269650 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269651 = ADVANCED_FACE('',(#269652),#269663,.F.); +#269652 = FACE_BOUND('',#269653,.T.); +#269653 = EDGE_LOOP('',(#269654,#269655,#269661,#269662)); +#269654 = ORIENTED_EDGE('',*,*,#265020,.T.); +#269655 = ORIENTED_EDGE('',*,*,#269656,.T.); +#269656 = EDGE_CURVE('',#265021,#266920,#269657,.T.); +#269657 = LINE('',#269658,#269659); +#269658 = CARTESIAN_POINT('',(174.19165,-89.2231,-4.6E-02)); +#269659 = VECTOR('',#269660,1.); +#269660 = DIRECTION('',(0.,0.,1.)); +#269661 = ORIENTED_EDGE('',*,*,#266919,.F.); +#269662 = ORIENTED_EDGE('',*,*,#269656,.F.); +#269663 = CYLINDRICAL_SURFACE('',#269664,0.4); +#269664 = AXIS2_PLACEMENT_3D('',#269665,#269666,#269667); +#269665 = CARTESIAN_POINT('',(174.19165,-88.8231,-4.6E-02)); +#269666 = DIRECTION('',(-0.,0.,-1.)); +#269667 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269668 = ADVANCED_FACE('',(#269669),#269680,.F.); +#269669 = FACE_BOUND('',#269670,.T.); +#269670 = EDGE_LOOP('',(#269671,#269672,#269678,#269679)); +#269671 = ORIENTED_EDGE('',*,*,#265031,.T.); +#269672 = ORIENTED_EDGE('',*,*,#269673,.T.); +#269673 = EDGE_CURVE('',#265032,#266931,#269674,.T.); +#269674 = LINE('',#269675,#269676); +#269675 = CARTESIAN_POINT('',(174.19165,-87.2231,-4.6E-02)); +#269676 = VECTOR('',#269677,1.); +#269677 = DIRECTION('',(0.,0.,1.)); +#269678 = ORIENTED_EDGE('',*,*,#266930,.F.); +#269679 = ORIENTED_EDGE('',*,*,#269673,.F.); +#269680 = CYLINDRICAL_SURFACE('',#269681,0.4); +#269681 = AXIS2_PLACEMENT_3D('',#269682,#269683,#269684); +#269682 = CARTESIAN_POINT('',(174.19165,-86.8231,-4.6E-02)); +#269683 = DIRECTION('',(-0.,0.,-1.)); +#269684 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269685 = ADVANCED_FACE('',(#269686),#269697,.F.); +#269686 = FACE_BOUND('',#269687,.T.); +#269687 = EDGE_LOOP('',(#269688,#269689,#269695,#269696)); +#269688 = ORIENTED_EDGE('',*,*,#265042,.T.); +#269689 = ORIENTED_EDGE('',*,*,#269690,.T.); +#269690 = EDGE_CURVE('',#265043,#266942,#269691,.T.); +#269691 = LINE('',#269692,#269693); +#269692 = CARTESIAN_POINT('',(174.19165,-85.2231,-4.6E-02)); +#269693 = VECTOR('',#269694,1.); +#269694 = DIRECTION('',(0.,0.,1.)); +#269695 = ORIENTED_EDGE('',*,*,#266941,.F.); +#269696 = ORIENTED_EDGE('',*,*,#269690,.F.); +#269697 = CYLINDRICAL_SURFACE('',#269698,0.4); +#269698 = AXIS2_PLACEMENT_3D('',#269699,#269700,#269701); +#269699 = CARTESIAN_POINT('',(174.19165,-84.8231,-4.6E-02)); +#269700 = DIRECTION('',(-0.,0.,-1.)); +#269701 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269702 = ADVANCED_FACE('',(#269703),#269714,.F.); +#269703 = FACE_BOUND('',#269704,.T.); +#269704 = EDGE_LOOP('',(#269705,#269706,#269712,#269713)); +#269705 = ORIENTED_EDGE('',*,*,#265053,.T.); +#269706 = ORIENTED_EDGE('',*,*,#269707,.T.); +#269707 = EDGE_CURVE('',#265054,#266953,#269708,.T.); +#269708 = LINE('',#269709,#269710); +#269709 = CARTESIAN_POINT('',(174.19165,-83.2231,-4.6E-02)); +#269710 = VECTOR('',#269711,1.); +#269711 = DIRECTION('',(0.,0.,1.)); +#269712 = ORIENTED_EDGE('',*,*,#266952,.F.); +#269713 = ORIENTED_EDGE('',*,*,#269707,.F.); +#269714 = CYLINDRICAL_SURFACE('',#269715,0.4); +#269715 = AXIS2_PLACEMENT_3D('',#269716,#269717,#269718); +#269716 = CARTESIAN_POINT('',(174.19165,-82.8231,-4.6E-02)); +#269717 = DIRECTION('',(-0.,0.,-1.)); +#269718 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269719 = ADVANCED_FACE('',(#269720),#269731,.F.); +#269720 = FACE_BOUND('',#269721,.T.); +#269721 = EDGE_LOOP('',(#269722,#269723,#269729,#269730)); +#269722 = ORIENTED_EDGE('',*,*,#265064,.T.); +#269723 = ORIENTED_EDGE('',*,*,#269724,.T.); +#269724 = EDGE_CURVE('',#265065,#266964,#269725,.T.); +#269725 = LINE('',#269726,#269727); +#269726 = CARTESIAN_POINT('',(174.19165,-81.2231,-4.6E-02)); +#269727 = VECTOR('',#269728,1.); +#269728 = DIRECTION('',(0.,0.,1.)); +#269729 = ORIENTED_EDGE('',*,*,#266963,.F.); +#269730 = ORIENTED_EDGE('',*,*,#269724,.F.); +#269731 = CYLINDRICAL_SURFACE('',#269732,0.4); +#269732 = AXIS2_PLACEMENT_3D('',#269733,#269734,#269735); +#269733 = CARTESIAN_POINT('',(174.19165,-80.8231,-4.6E-02)); +#269734 = DIRECTION('',(-0.,0.,-1.)); +#269735 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269736 = ADVANCED_FACE('',(#269737),#269748,.F.); +#269737 = FACE_BOUND('',#269738,.T.); +#269738 = EDGE_LOOP('',(#269739,#269740,#269746,#269747)); +#269739 = ORIENTED_EDGE('',*,*,#265075,.T.); +#269740 = ORIENTED_EDGE('',*,*,#269741,.T.); +#269741 = EDGE_CURVE('',#265076,#266975,#269742,.T.); +#269742 = LINE('',#269743,#269744); +#269743 = CARTESIAN_POINT('',(150.37165,-74.6031,-4.6E-02)); +#269744 = VECTOR('',#269745,1.); +#269745 = DIRECTION('',(0.,0.,1.)); +#269746 = ORIENTED_EDGE('',*,*,#266974,.F.); +#269747 = ORIENTED_EDGE('',*,*,#269741,.F.); +#269748 = CYLINDRICAL_SURFACE('',#269749,0.5); +#269749 = AXIS2_PLACEMENT_3D('',#269750,#269751,#269752); +#269750 = CARTESIAN_POINT('',(150.37165,-74.1031,-4.6E-02)); +#269751 = DIRECTION('',(-0.,-0.,-1.)); +#269752 = DIRECTION('',(-0.,-1.,0.)); +#269753 = ADVANCED_FACE('',(#269754),#269765,.F.); +#269754 = FACE_BOUND('',#269755,.T.); +#269755 = EDGE_LOOP('',(#269756,#269757,#269763,#269764)); +#269756 = ORIENTED_EDGE('',*,*,#265086,.T.); +#269757 = ORIENTED_EDGE('',*,*,#269758,.T.); +#269758 = EDGE_CURVE('',#265087,#266986,#269759,.T.); +#269759 = LINE('',#269760,#269761); +#269760 = CARTESIAN_POINT('',(152.91165,-74.6031,-4.6E-02)); +#269761 = VECTOR('',#269762,1.); +#269762 = DIRECTION('',(0.,0.,1.)); +#269763 = ORIENTED_EDGE('',*,*,#266985,.F.); +#269764 = ORIENTED_EDGE('',*,*,#269758,.F.); +#269765 = CYLINDRICAL_SURFACE('',#269766,0.5); +#269766 = AXIS2_PLACEMENT_3D('',#269767,#269768,#269769); +#269767 = CARTESIAN_POINT('',(152.91165,-74.1031,-4.6E-02)); +#269768 = DIRECTION('',(-0.,-0.,-1.)); +#269769 = DIRECTION('',(-0.,-1.,0.)); +#269770 = ADVANCED_FACE('',(#269771),#269782,.F.); +#269771 = FACE_BOUND('',#269772,.T.); +#269772 = EDGE_LOOP('',(#269773,#269774,#269780,#269781)); +#269773 = ORIENTED_EDGE('',*,*,#265097,.T.); +#269774 = ORIENTED_EDGE('',*,*,#269775,.T.); +#269775 = EDGE_CURVE('',#265098,#266997,#269776,.T.); +#269776 = LINE('',#269777,#269778); +#269777 = CARTESIAN_POINT('',(155.45165,-74.6031,-4.6E-02)); +#269778 = VECTOR('',#269779,1.); +#269779 = DIRECTION('',(0.,0.,1.)); +#269780 = ORIENTED_EDGE('',*,*,#266996,.F.); +#269781 = ORIENTED_EDGE('',*,*,#269775,.F.); +#269782 = CYLINDRICAL_SURFACE('',#269783,0.5); +#269783 = AXIS2_PLACEMENT_3D('',#269784,#269785,#269786); +#269784 = CARTESIAN_POINT('',(155.45165,-74.1031,-4.6E-02)); +#269785 = DIRECTION('',(-0.,-0.,-1.)); +#269786 = DIRECTION('',(-0.,-1.,0.)); +#269787 = ADVANCED_FACE('',(#269788),#269799,.F.); +#269788 = FACE_BOUND('',#269789,.T.); +#269789 = EDGE_LOOP('',(#269790,#269791,#269797,#269798)); +#269790 = ORIENTED_EDGE('',*,*,#265108,.T.); +#269791 = ORIENTED_EDGE('',*,*,#269792,.T.); +#269792 = EDGE_CURVE('',#265109,#267008,#269793,.T.); +#269793 = LINE('',#269794,#269795); +#269794 = CARTESIAN_POINT('',(174.19165,-79.2231,-4.6E-02)); +#269795 = VECTOR('',#269796,1.); +#269796 = DIRECTION('',(0.,0.,1.)); +#269797 = ORIENTED_EDGE('',*,*,#267007,.F.); +#269798 = ORIENTED_EDGE('',*,*,#269792,.F.); +#269799 = CYLINDRICAL_SURFACE('',#269800,0.4); +#269800 = AXIS2_PLACEMENT_3D('',#269801,#269802,#269803); +#269801 = CARTESIAN_POINT('',(174.19165,-78.8231,-4.6E-02)); +#269802 = DIRECTION('',(-0.,0.,-1.)); +#269803 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269804 = ADVANCED_FACE('',(#269805),#269816,.F.); +#269805 = FACE_BOUND('',#269806,.T.); +#269806 = EDGE_LOOP('',(#269807,#269808,#269814,#269815)); +#269807 = ORIENTED_EDGE('',*,*,#265119,.T.); +#269808 = ORIENTED_EDGE('',*,*,#269809,.T.); +#269809 = EDGE_CURVE('',#265120,#267019,#269810,.T.); +#269810 = LINE('',#269811,#269812); +#269811 = CARTESIAN_POINT('',(174.19165,-77.2231,-4.6E-02)); +#269812 = VECTOR('',#269813,1.); +#269813 = DIRECTION('',(0.,0.,1.)); +#269814 = ORIENTED_EDGE('',*,*,#267018,.F.); +#269815 = ORIENTED_EDGE('',*,*,#269809,.F.); +#269816 = CYLINDRICAL_SURFACE('',#269817,0.4); +#269817 = AXIS2_PLACEMENT_3D('',#269818,#269819,#269820); +#269818 = CARTESIAN_POINT('',(174.19165,-76.8231,-4.6E-02)); +#269819 = DIRECTION('',(-0.,0.,-1.)); +#269820 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269821 = ADVANCED_FACE('',(#269822),#269833,.F.); +#269822 = FACE_BOUND('',#269823,.T.); +#269823 = EDGE_LOOP('',(#269824,#269825,#269831,#269832)); +#269824 = ORIENTED_EDGE('',*,*,#265130,.T.); +#269825 = ORIENTED_EDGE('',*,*,#269826,.T.); +#269826 = EDGE_CURVE('',#265131,#267030,#269827,.T.); +#269827 = LINE('',#269828,#269829); +#269828 = CARTESIAN_POINT('',(174.19165,-75.2231,-4.6E-02)); +#269829 = VECTOR('',#269830,1.); +#269830 = DIRECTION('',(0.,0.,1.)); +#269831 = ORIENTED_EDGE('',*,*,#267029,.F.); +#269832 = ORIENTED_EDGE('',*,*,#269826,.F.); +#269833 = CYLINDRICAL_SURFACE('',#269834,0.4); +#269834 = AXIS2_PLACEMENT_3D('',#269835,#269836,#269837); +#269835 = CARTESIAN_POINT('',(174.19165,-74.8231,-4.6E-02)); +#269836 = DIRECTION('',(-0.,0.,-1.)); +#269837 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#269838 = ADVANCED_FACE('',(#269839),#269850,.F.); +#269839 = FACE_BOUND('',#269840,.T.); +#269840 = EDGE_LOOP('',(#269841,#269842,#269848,#269849)); +#269841 = ORIENTED_EDGE('',*,*,#265141,.T.); +#269842 = ORIENTED_EDGE('',*,*,#269843,.T.); +#269843 = EDGE_CURVE('',#265142,#267041,#269844,.T.); +#269844 = LINE('',#269845,#269846); +#269845 = CARTESIAN_POINT('',(196.54165,-91.2231,-4.6E-02)); +#269846 = VECTOR('',#269847,1.); +#269847 = DIRECTION('',(0.,0.,1.)); +#269848 = ORIENTED_EDGE('',*,*,#267040,.F.); +#269849 = ORIENTED_EDGE('',*,*,#269843,.F.); +#269850 = CYLINDRICAL_SURFACE('',#269851,0.4); +#269851 = AXIS2_PLACEMENT_3D('',#269852,#269853,#269854); +#269852 = CARTESIAN_POINT('',(196.54165,-90.8231,-4.6E-02)); +#269853 = DIRECTION('',(-0.,-0.,-1.)); +#269854 = DIRECTION('',(-0.,-1.,0.)); +#269855 = ADVANCED_FACE('',(#269856),#269867,.F.); +#269856 = FACE_BOUND('',#269857,.T.); +#269857 = EDGE_LOOP('',(#269858,#269859,#269865,#269866)); +#269858 = ORIENTED_EDGE('',*,*,#265152,.T.); +#269859 = ORIENTED_EDGE('',*,*,#269860,.T.); +#269860 = EDGE_CURVE('',#265153,#267052,#269861,.T.); +#269861 = LINE('',#269862,#269863); +#269862 = CARTESIAN_POINT('',(196.54165,-89.2231,-4.6E-02)); +#269863 = VECTOR('',#269864,1.); +#269864 = DIRECTION('',(0.,0.,1.)); +#269865 = ORIENTED_EDGE('',*,*,#267051,.F.); +#269866 = ORIENTED_EDGE('',*,*,#269860,.F.); +#269867 = CYLINDRICAL_SURFACE('',#269868,0.4); +#269868 = AXIS2_PLACEMENT_3D('',#269869,#269870,#269871); +#269869 = CARTESIAN_POINT('',(196.54165,-88.8231,-4.6E-02)); +#269870 = DIRECTION('',(-0.,-0.,-1.)); +#269871 = DIRECTION('',(-0.,-1.,0.)); +#269872 = ADVANCED_FACE('',(#269873),#269884,.F.); +#269873 = FACE_BOUND('',#269874,.T.); +#269874 = EDGE_LOOP('',(#269875,#269876,#269882,#269883)); +#269875 = ORIENTED_EDGE('',*,*,#265163,.T.); +#269876 = ORIENTED_EDGE('',*,*,#269877,.T.); +#269877 = EDGE_CURVE('',#265164,#267063,#269878,.T.); +#269878 = LINE('',#269879,#269880); +#269879 = CARTESIAN_POINT('',(196.54165,-87.2231,-4.6E-02)); +#269880 = VECTOR('',#269881,1.); +#269881 = DIRECTION('',(0.,0.,1.)); +#269882 = ORIENTED_EDGE('',*,*,#267062,.F.); +#269883 = ORIENTED_EDGE('',*,*,#269877,.F.); +#269884 = CYLINDRICAL_SURFACE('',#269885,0.4); +#269885 = AXIS2_PLACEMENT_3D('',#269886,#269887,#269888); +#269886 = CARTESIAN_POINT('',(196.54165,-86.8231,-4.6E-02)); +#269887 = DIRECTION('',(-0.,-0.,-1.)); +#269888 = DIRECTION('',(-0.,-1.,0.)); +#269889 = ADVANCED_FACE('',(#269890),#269901,.F.); +#269890 = FACE_BOUND('',#269891,.T.); +#269891 = EDGE_LOOP('',(#269892,#269893,#269899,#269900)); +#269892 = ORIENTED_EDGE('',*,*,#265174,.T.); +#269893 = ORIENTED_EDGE('',*,*,#269894,.T.); +#269894 = EDGE_CURVE('',#265175,#267074,#269895,.T.); +#269895 = LINE('',#269896,#269897); +#269896 = CARTESIAN_POINT('',(196.54165,-85.2231,-4.6E-02)); +#269897 = VECTOR('',#269898,1.); +#269898 = DIRECTION('',(0.,0.,1.)); +#269899 = ORIENTED_EDGE('',*,*,#267073,.F.); +#269900 = ORIENTED_EDGE('',*,*,#269894,.F.); +#269901 = CYLINDRICAL_SURFACE('',#269902,0.4); +#269902 = AXIS2_PLACEMENT_3D('',#269903,#269904,#269905); +#269903 = CARTESIAN_POINT('',(196.54165,-84.8231,-4.6E-02)); +#269904 = DIRECTION('',(-0.,-0.,-1.)); +#269905 = DIRECTION('',(-0.,-1.,0.)); +#269906 = ADVANCED_FACE('',(#269907),#269918,.F.); +#269907 = FACE_BOUND('',#269908,.T.); +#269908 = EDGE_LOOP('',(#269909,#269910,#269916,#269917)); +#269909 = ORIENTED_EDGE('',*,*,#265185,.T.); +#269910 = ORIENTED_EDGE('',*,*,#269911,.T.); +#269911 = EDGE_CURVE('',#265186,#267085,#269912,.T.); +#269912 = LINE('',#269913,#269914); +#269913 = CARTESIAN_POINT('',(196.54165,-83.2231,-4.6E-02)); +#269914 = VECTOR('',#269915,1.); +#269915 = DIRECTION('',(0.,0.,1.)); +#269916 = ORIENTED_EDGE('',*,*,#267084,.F.); +#269917 = ORIENTED_EDGE('',*,*,#269911,.F.); +#269918 = CYLINDRICAL_SURFACE('',#269919,0.4); +#269919 = AXIS2_PLACEMENT_3D('',#269920,#269921,#269922); +#269920 = CARTESIAN_POINT('',(196.54165,-82.8231,-4.6E-02)); +#269921 = DIRECTION('',(-0.,-0.,-1.)); +#269922 = DIRECTION('',(-0.,-1.,0.)); +#269923 = ADVANCED_FACE('',(#269924),#269935,.F.); +#269924 = FACE_BOUND('',#269925,.T.); +#269925 = EDGE_LOOP('',(#269926,#269927,#269933,#269934)); +#269926 = ORIENTED_EDGE('',*,*,#265196,.T.); +#269927 = ORIENTED_EDGE('',*,*,#269928,.T.); +#269928 = EDGE_CURVE('',#265197,#267096,#269929,.T.); +#269929 = LINE('',#269930,#269931); +#269930 = CARTESIAN_POINT('',(196.54165,-81.2231,-4.6E-02)); +#269931 = VECTOR('',#269932,1.); +#269932 = DIRECTION('',(0.,0.,1.)); +#269933 = ORIENTED_EDGE('',*,*,#267095,.F.); +#269934 = ORIENTED_EDGE('',*,*,#269928,.F.); +#269935 = CYLINDRICAL_SURFACE('',#269936,0.4); +#269936 = AXIS2_PLACEMENT_3D('',#269937,#269938,#269939); +#269937 = CARTESIAN_POINT('',(196.54165,-80.8231,-4.6E-02)); +#269938 = DIRECTION('',(-0.,-0.,-1.)); +#269939 = DIRECTION('',(-0.,-1.,0.)); +#269940 = ADVANCED_FACE('',(#269941),#269952,.F.); +#269941 = FACE_BOUND('',#269942,.T.); +#269942 = EDGE_LOOP('',(#269943,#269944,#269950,#269951)); +#269943 = ORIENTED_EDGE('',*,*,#265207,.T.); +#269944 = ORIENTED_EDGE('',*,*,#269945,.T.); +#269945 = EDGE_CURVE('',#265208,#267107,#269946,.T.); +#269946 = LINE('',#269947,#269948); +#269947 = CARTESIAN_POINT('',(210.19165,-90.7981,-4.6E-02)); +#269948 = VECTOR('',#269949,1.); +#269949 = DIRECTION('',(0.,0.,1.)); +#269950 = ORIENTED_EDGE('',*,*,#267106,.F.); +#269951 = ORIENTED_EDGE('',*,*,#269945,.F.); +#269952 = CYLINDRICAL_SURFACE('',#269953,0.475); +#269953 = AXIS2_PLACEMENT_3D('',#269954,#269955,#269956); +#269954 = CARTESIAN_POINT('',(210.19165,-90.3231,-4.6E-02)); +#269955 = DIRECTION('',(-0.,0.,-1.)); +#269956 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#269957 = ADVANCED_FACE('',(#269958),#269969,.F.); +#269958 = FACE_BOUND('',#269959,.T.); +#269959 = EDGE_LOOP('',(#269960,#269961,#269967,#269968)); +#269960 = ORIENTED_EDGE('',*,*,#265218,.T.); +#269961 = ORIENTED_EDGE('',*,*,#269962,.T.); +#269962 = EDGE_CURVE('',#265219,#267118,#269963,.T.); +#269963 = LINE('',#269964,#269965); +#269964 = CARTESIAN_POINT('',(210.19165,-88.2981,-4.6E-02)); +#269965 = VECTOR('',#269966,1.); +#269966 = DIRECTION('',(0.,0.,1.)); +#269967 = ORIENTED_EDGE('',*,*,#267117,.F.); +#269968 = ORIENTED_EDGE('',*,*,#269962,.F.); +#269969 = CYLINDRICAL_SURFACE('',#269970,0.475); +#269970 = AXIS2_PLACEMENT_3D('',#269971,#269972,#269973); +#269971 = CARTESIAN_POINT('',(210.19165,-87.8231,-4.6E-02)); +#269972 = DIRECTION('',(-0.,0.,-1.)); +#269973 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#269974 = ADVANCED_FACE('',(#269975),#269986,.F.); +#269975 = FACE_BOUND('',#269976,.T.); +#269976 = EDGE_LOOP('',(#269977,#269978,#269984,#269985)); +#269977 = ORIENTED_EDGE('',*,*,#265229,.T.); +#269978 = ORIENTED_EDGE('',*,*,#269979,.T.); +#269979 = EDGE_CURVE('',#265230,#267129,#269980,.T.); +#269980 = LINE('',#269981,#269982); +#269981 = CARTESIAN_POINT('',(210.16665,-80.5731,-4.6E-02)); +#269982 = VECTOR('',#269983,1.); +#269983 = DIRECTION('',(0.,0.,1.)); +#269984 = ORIENTED_EDGE('',*,*,#267128,.F.); +#269985 = ORIENTED_EDGE('',*,*,#269979,.F.); +#269986 = CYLINDRICAL_SURFACE('',#269987,0.5); +#269987 = AXIS2_PLACEMENT_3D('',#269988,#269989,#269990); +#269988 = CARTESIAN_POINT('',(210.16665,-80.0731,-4.6E-02)); +#269989 = DIRECTION('',(-0.,-0.,-1.)); +#269990 = DIRECTION('',(-0.,-1.,0.)); +#269991 = ADVANCED_FACE('',(#269992),#270003,.F.); +#269992 = FACE_BOUND('',#269993,.T.); +#269993 = EDGE_LOOP('',(#269994,#269995,#270001,#270002)); +#269994 = ORIENTED_EDGE('',*,*,#265240,.T.); +#269995 = ORIENTED_EDGE('',*,*,#269996,.T.); +#269996 = EDGE_CURVE('',#265241,#267140,#269997,.T.); +#269997 = LINE('',#269998,#269999); +#269998 = CARTESIAN_POINT('',(196.54165,-79.2231,-4.6E-02)); +#269999 = VECTOR('',#270000,1.); +#270000 = DIRECTION('',(0.,0.,1.)); +#270001 = ORIENTED_EDGE('',*,*,#267139,.F.); +#270002 = ORIENTED_EDGE('',*,*,#269996,.F.); +#270003 = CYLINDRICAL_SURFACE('',#270004,0.4); +#270004 = AXIS2_PLACEMENT_3D('',#270005,#270006,#270007); +#270005 = CARTESIAN_POINT('',(196.54165,-78.8231,-4.6E-02)); +#270006 = DIRECTION('',(-0.,-0.,-1.)); +#270007 = DIRECTION('',(-0.,-1.,0.)); +#270008 = ADVANCED_FACE('',(#270009),#270020,.F.); +#270009 = FACE_BOUND('',#270010,.T.); +#270010 = EDGE_LOOP('',(#270011,#270012,#270018,#270019)); +#270011 = ORIENTED_EDGE('',*,*,#265251,.T.); +#270012 = ORIENTED_EDGE('',*,*,#270013,.T.); +#270013 = EDGE_CURVE('',#265252,#267151,#270014,.T.); +#270014 = LINE('',#270015,#270016); +#270015 = CARTESIAN_POINT('',(196.54165,-77.2231,-4.6E-02)); +#270016 = VECTOR('',#270017,1.); +#270017 = DIRECTION('',(0.,0.,1.)); +#270018 = ORIENTED_EDGE('',*,*,#267150,.F.); +#270019 = ORIENTED_EDGE('',*,*,#270013,.F.); +#270020 = CYLINDRICAL_SURFACE('',#270021,0.4); +#270021 = AXIS2_PLACEMENT_3D('',#270022,#270023,#270024); +#270022 = CARTESIAN_POINT('',(196.54165,-76.8231,-4.6E-02)); +#270023 = DIRECTION('',(-0.,-0.,-1.)); +#270024 = DIRECTION('',(-0.,-1.,0.)); +#270025 = ADVANCED_FACE('',(#270026),#270037,.F.); +#270026 = FACE_BOUND('',#270027,.T.); +#270027 = EDGE_LOOP('',(#270028,#270029,#270035,#270036)); +#270028 = ORIENTED_EDGE('',*,*,#265262,.T.); +#270029 = ORIENTED_EDGE('',*,*,#270030,.T.); +#270030 = EDGE_CURVE('',#265263,#267162,#270031,.T.); +#270031 = LINE('',#270032,#270033); +#270032 = CARTESIAN_POINT('',(196.54165,-75.2231,-4.6E-02)); +#270033 = VECTOR('',#270034,1.); +#270034 = DIRECTION('',(0.,0.,1.)); +#270035 = ORIENTED_EDGE('',*,*,#267161,.F.); +#270036 = ORIENTED_EDGE('',*,*,#270030,.F.); +#270037 = CYLINDRICAL_SURFACE('',#270038,0.4); +#270038 = AXIS2_PLACEMENT_3D('',#270039,#270040,#270041); +#270039 = CARTESIAN_POINT('',(196.54165,-74.8231,-4.6E-02)); +#270040 = DIRECTION('',(-0.,-0.,-1.)); +#270041 = DIRECTION('',(-0.,-1.,0.)); +#270042 = ADVANCED_FACE('',(#270043),#270054,.F.); +#270043 = FACE_BOUND('',#270044,.T.); +#270044 = EDGE_LOOP('',(#270045,#270046,#270052,#270053)); +#270045 = ORIENTED_EDGE('',*,*,#265273,.T.); +#270046 = ORIENTED_EDGE('',*,*,#270047,.T.); +#270047 = EDGE_CURVE('',#265274,#267173,#270048,.T.); +#270048 = LINE('',#270049,#270050); +#270049 = CARTESIAN_POINT('',(210.16665,-78.0731,-4.6E-02)); +#270050 = VECTOR('',#270051,1.); +#270051 = DIRECTION('',(0.,0.,1.)); +#270052 = ORIENTED_EDGE('',*,*,#267172,.F.); +#270053 = ORIENTED_EDGE('',*,*,#270047,.F.); +#270054 = CYLINDRICAL_SURFACE('',#270055,0.5); +#270055 = AXIS2_PLACEMENT_3D('',#270056,#270057,#270058); +#270056 = CARTESIAN_POINT('',(210.16665,-77.5731,-4.6E-02)); +#270057 = DIRECTION('',(-0.,-0.,-1.)); +#270058 = DIRECTION('',(-0.,-1.,0.)); +#270059 = ADVANCED_FACE('',(#270060),#270071,.F.); +#270060 = FACE_BOUND('',#270061,.T.); +#270061 = EDGE_LOOP('',(#270062,#270063,#270069,#270070)); +#270062 = ORIENTED_EDGE('',*,*,#265284,.T.); +#270063 = ORIENTED_EDGE('',*,*,#270064,.T.); +#270064 = EDGE_CURVE('',#265285,#267184,#270065,.T.); +#270065 = LINE('',#270066,#270067); +#270066 = CARTESIAN_POINT('',(210.16665,-71.3231,-4.6E-02)); +#270067 = VECTOR('',#270068,1.); +#270068 = DIRECTION('',(0.,0.,1.)); +#270069 = ORIENTED_EDGE('',*,*,#267183,.F.); +#270070 = ORIENTED_EDGE('',*,*,#270064,.F.); +#270071 = CYLINDRICAL_SURFACE('',#270072,0.5); +#270072 = AXIS2_PLACEMENT_3D('',#270073,#270074,#270075); +#270073 = CARTESIAN_POINT('',(210.16665,-70.8231,-4.6E-02)); +#270074 = DIRECTION('',(-0.,-0.,-1.)); +#270075 = DIRECTION('',(-0.,-1.,0.)); +#270076 = ADVANCED_FACE('',(#270077),#270088,.F.); +#270077 = FACE_BOUND('',#270078,.T.); +#270078 = EDGE_LOOP('',(#270079,#270080,#270086,#270087)); +#270079 = ORIENTED_EDGE('',*,*,#265295,.T.); +#270080 = ORIENTED_EDGE('',*,*,#270081,.T.); +#270081 = EDGE_CURVE('',#265296,#267195,#270082,.T.); +#270082 = LINE('',#270083,#270084); +#270083 = CARTESIAN_POINT('',(210.16665,-68.8231,-4.6E-02)); +#270084 = VECTOR('',#270085,1.); +#270085 = DIRECTION('',(0.,0.,1.)); +#270086 = ORIENTED_EDGE('',*,*,#267194,.F.); +#270087 = ORIENTED_EDGE('',*,*,#270081,.F.); +#270088 = CYLINDRICAL_SURFACE('',#270089,0.5); +#270089 = AXIS2_PLACEMENT_3D('',#270090,#270091,#270092); +#270090 = CARTESIAN_POINT('',(210.16665,-68.3231,-4.6E-02)); +#270091 = DIRECTION('',(-0.,-0.,-1.)); +#270092 = DIRECTION('',(-0.,-1.,0.)); +#270093 = ADVANCED_FACE('',(#270094),#270105,.F.); +#270094 = FACE_BOUND('',#270095,.T.); +#270095 = EDGE_LOOP('',(#270096,#270097,#270103,#270104)); +#270096 = ORIENTED_EDGE('',*,*,#265306,.T.); +#270097 = ORIENTED_EDGE('',*,*,#270098,.T.); +#270098 = EDGE_CURVE('',#265307,#267206,#270099,.T.); +#270099 = LINE('',#270100,#270101); +#270100 = CARTESIAN_POINT('',(150.37165,-56.8231,-4.6E-02)); +#270101 = VECTOR('',#270102,1.); +#270102 = DIRECTION('',(0.,0.,1.)); +#270103 = ORIENTED_EDGE('',*,*,#267205,.F.); +#270104 = ORIENTED_EDGE('',*,*,#270098,.F.); +#270105 = CYLINDRICAL_SURFACE('',#270106,0.5); +#270106 = AXIS2_PLACEMENT_3D('',#270107,#270108,#270109); +#270107 = CARTESIAN_POINT('',(150.37165,-56.3231,-4.6E-02)); +#270108 = DIRECTION('',(-0.,-0.,-1.)); +#270109 = DIRECTION('',(-0.,-1.,0.)); +#270110 = ADVANCED_FACE('',(#270111),#270122,.F.); +#270111 = FACE_BOUND('',#270112,.T.); +#270112 = EDGE_LOOP('',(#270113,#270114,#270120,#270121)); +#270113 = ORIENTED_EDGE('',*,*,#265317,.T.); +#270114 = ORIENTED_EDGE('',*,*,#270115,.T.); +#270115 = EDGE_CURVE('',#265318,#267217,#270116,.T.); +#270116 = LINE('',#270117,#270118); +#270117 = CARTESIAN_POINT('',(152.91165,-56.8231,-4.6E-02)); +#270118 = VECTOR('',#270119,1.); +#270119 = DIRECTION('',(0.,0.,1.)); +#270120 = ORIENTED_EDGE('',*,*,#267216,.F.); +#270121 = ORIENTED_EDGE('',*,*,#270115,.F.); +#270122 = CYLINDRICAL_SURFACE('',#270123,0.5); +#270123 = AXIS2_PLACEMENT_3D('',#270124,#270125,#270126); +#270124 = CARTESIAN_POINT('',(152.91165,-56.3231,-4.6E-02)); +#270125 = DIRECTION('',(-0.,-0.,-1.)); +#270126 = DIRECTION('',(-0.,-1.,0.)); +#270127 = ADVANCED_FACE('',(#270128),#270139,.F.); +#270128 = FACE_BOUND('',#270129,.T.); +#270129 = EDGE_LOOP('',(#270130,#270131,#270137,#270138)); +#270130 = ORIENTED_EDGE('',*,*,#265328,.T.); +#270131 = ORIENTED_EDGE('',*,*,#270132,.T.); +#270132 = EDGE_CURVE('',#265329,#267228,#270133,.T.); +#270133 = LINE('',#270134,#270135); +#270134 = CARTESIAN_POINT('',(155.45165,-56.8231,-4.6E-02)); +#270135 = VECTOR('',#270136,1.); +#270136 = DIRECTION('',(0.,0.,1.)); +#270137 = ORIENTED_EDGE('',*,*,#267227,.F.); +#270138 = ORIENTED_EDGE('',*,*,#270132,.F.); +#270139 = CYLINDRICAL_SURFACE('',#270140,0.5); +#270140 = AXIS2_PLACEMENT_3D('',#270141,#270142,#270143); +#270141 = CARTESIAN_POINT('',(155.45165,-56.3231,-4.6E-02)); +#270142 = DIRECTION('',(-0.,-0.,-1.)); +#270143 = DIRECTION('',(-0.,-1.,0.)); +#270144 = ADVANCED_FACE('',(#270145),#270156,.F.); +#270145 = FACE_BOUND('',#270146,.T.); +#270146 = EDGE_LOOP('',(#270147,#270148,#270154,#270155)); +#270147 = ORIENTED_EDGE('',*,*,#265339,.T.); +#270148 = ORIENTED_EDGE('',*,*,#270149,.T.); +#270149 = EDGE_CURVE('',#265340,#267239,#270150,.T.); +#270150 = LINE('',#270151,#270152); +#270151 = CARTESIAN_POINT('',(189.28415,-66.5256,-4.6E-02)); +#270152 = VECTOR('',#270153,1.); +#270153 = DIRECTION('',(0.,0.,1.)); +#270154 = ORIENTED_EDGE('',*,*,#267238,.F.); +#270155 = ORIENTED_EDGE('',*,*,#270149,.F.); +#270156 = CYLINDRICAL_SURFACE('',#270157,0.5); +#270157 = AXIS2_PLACEMENT_3D('',#270158,#270159,#270160); +#270158 = CARTESIAN_POINT('',(189.28415,-66.0256,-4.6E-02)); +#270159 = DIRECTION('',(-0.,-0.,-1.)); +#270160 = DIRECTION('',(-0.,-1.,0.)); +#270161 = ADVANCED_FACE('',(#270162),#270173,.F.); +#270162 = FACE_BOUND('',#270163,.T.); +#270163 = EDGE_LOOP('',(#270164,#270165,#270171,#270172)); +#270164 = ORIENTED_EDGE('',*,*,#265350,.T.); +#270165 = ORIENTED_EDGE('',*,*,#270166,.T.); +#270166 = EDGE_CURVE('',#265351,#267250,#270167,.T.); +#270167 = LINE('',#270168,#270169); +#270168 = CARTESIAN_POINT('',(194.36415,-66.5256,-4.6E-02)); +#270169 = VECTOR('',#270170,1.); +#270170 = DIRECTION('',(0.,0.,1.)); +#270171 = ORIENTED_EDGE('',*,*,#267249,.F.); +#270172 = ORIENTED_EDGE('',*,*,#270166,.F.); +#270173 = CYLINDRICAL_SURFACE('',#270174,0.5); +#270174 = AXIS2_PLACEMENT_3D('',#270175,#270176,#270177); +#270175 = CARTESIAN_POINT('',(194.36415,-66.0256,-4.6E-02)); +#270176 = DIRECTION('',(-0.,-0.,-1.)); +#270177 = DIRECTION('',(-0.,-1.,0.)); +#270178 = ADVANCED_FACE('',(#270179),#270190,.F.); +#270179 = FACE_BOUND('',#270180,.T.); +#270180 = EDGE_LOOP('',(#270181,#270182,#270188,#270189)); +#270181 = ORIENTED_EDGE('',*,*,#265361,.T.); +#270182 = ORIENTED_EDGE('',*,*,#270183,.T.); +#270183 = EDGE_CURVE('',#265362,#267261,#270184,.T.); +#270184 = LINE('',#270185,#270186); +#270185 = CARTESIAN_POINT('',(189.28415,-58.9056,-4.6E-02)); +#270186 = VECTOR('',#270187,1.); +#270187 = DIRECTION('',(0.,0.,1.)); +#270188 = ORIENTED_EDGE('',*,*,#267260,.F.); +#270189 = ORIENTED_EDGE('',*,*,#270183,.F.); +#270190 = CYLINDRICAL_SURFACE('',#270191,0.5); +#270191 = AXIS2_PLACEMENT_3D('',#270192,#270193,#270194); +#270192 = CARTESIAN_POINT('',(189.28415,-58.4056,-4.6E-02)); +#270193 = DIRECTION('',(-0.,-0.,-1.)); +#270194 = DIRECTION('',(-0.,-1.,0.)); +#270195 = ADVANCED_FACE('',(#270196),#270207,.F.); +#270196 = FACE_BOUND('',#270197,.T.); +#270197 = EDGE_LOOP('',(#270198,#270199,#270205,#270206)); +#270198 = ORIENTED_EDGE('',*,*,#265372,.T.); +#270199 = ORIENTED_EDGE('',*,*,#270200,.T.); +#270200 = EDGE_CURVE('',#265373,#267272,#270201,.T.); +#270201 = LINE('',#270202,#270203); +#270202 = CARTESIAN_POINT('',(189.28415,-56.3656,-4.6E-02)); +#270203 = VECTOR('',#270204,1.); +#270204 = DIRECTION('',(0.,0.,1.)); +#270205 = ORIENTED_EDGE('',*,*,#267271,.F.); +#270206 = ORIENTED_EDGE('',*,*,#270200,.F.); +#270207 = CYLINDRICAL_SURFACE('',#270208,0.5); +#270208 = AXIS2_PLACEMENT_3D('',#270209,#270210,#270211); +#270209 = CARTESIAN_POINT('',(189.28415,-55.8656,-4.6E-02)); +#270210 = DIRECTION('',(-0.,-0.,-1.)); +#270211 = DIRECTION('',(-0.,-1.,0.)); +#270212 = ADVANCED_FACE('',(#270213),#270224,.F.); +#270213 = FACE_BOUND('',#270214,.T.); +#270214 = EDGE_LOOP('',(#270215,#270216,#270222,#270223)); +#270215 = ORIENTED_EDGE('',*,*,#265383,.T.); +#270216 = ORIENTED_EDGE('',*,*,#270217,.T.); +#270217 = EDGE_CURVE('',#265384,#267283,#270218,.T.); +#270218 = LINE('',#270219,#270220); +#270219 = CARTESIAN_POINT('',(194.36415,-58.9056,-4.6E-02)); +#270220 = VECTOR('',#270221,1.); +#270221 = DIRECTION('',(0.,0.,1.)); +#270222 = ORIENTED_EDGE('',*,*,#267282,.F.); +#270223 = ORIENTED_EDGE('',*,*,#270217,.F.); +#270224 = CYLINDRICAL_SURFACE('',#270225,0.5); +#270225 = AXIS2_PLACEMENT_3D('',#270226,#270227,#270228); +#270226 = CARTESIAN_POINT('',(194.36415,-58.4056,-4.6E-02)); +#270227 = DIRECTION('',(-0.,-0.,-1.)); +#270228 = DIRECTION('',(-0.,-1.,0.)); +#270229 = ADVANCED_FACE('',(#270230),#270241,.F.); +#270230 = FACE_BOUND('',#270231,.T.); +#270231 = EDGE_LOOP('',(#270232,#270233,#270239,#270240)); +#270232 = ORIENTED_EDGE('',*,*,#265394,.T.); +#270233 = ORIENTED_EDGE('',*,*,#270234,.T.); +#270234 = EDGE_CURVE('',#265395,#267294,#270235,.T.); +#270235 = LINE('',#270236,#270237); +#270236 = CARTESIAN_POINT('',(194.36415,-56.3656,-4.6E-02)); +#270237 = VECTOR('',#270238,1.); +#270238 = DIRECTION('',(0.,0.,1.)); +#270239 = ORIENTED_EDGE('',*,*,#267293,.F.); +#270240 = ORIENTED_EDGE('',*,*,#270234,.F.); +#270241 = CYLINDRICAL_SURFACE('',#270242,0.5); +#270242 = AXIS2_PLACEMENT_3D('',#270243,#270244,#270245); +#270243 = CARTESIAN_POINT('',(194.36415,-55.8656,-4.6E-02)); +#270244 = DIRECTION('',(-0.,-0.,-1.)); +#270245 = DIRECTION('',(-0.,-1.,0.)); +#270246 = ADVANCED_FACE('',(#270247),#270258,.F.); +#270247 = FACE_BOUND('',#270248,.T.); +#270248 = EDGE_LOOP('',(#270249,#270250,#270256,#270257)); +#270249 = ORIENTED_EDGE('',*,*,#265405,.T.); +#270250 = ORIENTED_EDGE('',*,*,#270251,.T.); +#270251 = EDGE_CURVE('',#265406,#267305,#270252,.T.); +#270252 = LINE('',#270253,#270254); +#270253 = CARTESIAN_POINT('',(210.19165,-62.2981,-4.6E-02)); +#270254 = VECTOR('',#270255,1.); +#270255 = DIRECTION('',(0.,0.,1.)); +#270256 = ORIENTED_EDGE('',*,*,#267304,.F.); +#270257 = ORIENTED_EDGE('',*,*,#270251,.F.); +#270258 = CYLINDRICAL_SURFACE('',#270259,0.475); +#270259 = AXIS2_PLACEMENT_3D('',#270260,#270261,#270262); +#270260 = CARTESIAN_POINT('',(210.19165,-61.8231,-4.6E-02)); +#270261 = DIRECTION('',(-0.,0.,-1.)); +#270262 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270263 = ADVANCED_FACE('',(#270264),#270275,.F.); +#270264 = FACE_BOUND('',#270265,.T.); +#270265 = EDGE_LOOP('',(#270266,#270267,#270273,#270274)); +#270266 = ORIENTED_EDGE('',*,*,#265416,.T.); +#270267 = ORIENTED_EDGE('',*,*,#270268,.T.); +#270268 = EDGE_CURVE('',#265417,#267316,#270269,.T.); +#270269 = LINE('',#270270,#270271); +#270270 = CARTESIAN_POINT('',(210.19165,-59.7981,-4.6E-02)); +#270271 = VECTOR('',#270272,1.); +#270272 = DIRECTION('',(0.,0.,1.)); +#270273 = ORIENTED_EDGE('',*,*,#267315,.F.); +#270274 = ORIENTED_EDGE('',*,*,#270268,.F.); +#270275 = CYLINDRICAL_SURFACE('',#270276,0.475); +#270276 = AXIS2_PLACEMENT_3D('',#270277,#270278,#270279); +#270277 = CARTESIAN_POINT('',(210.19165,-59.3231,-4.6E-02)); +#270278 = DIRECTION('',(-0.,0.,-1.)); +#270279 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270280 = ADVANCED_FACE('',(#270281),#270292,.F.); +#270281 = FACE_BOUND('',#270282,.T.); +#270282 = EDGE_LOOP('',(#270283,#270284,#270290,#270291)); +#270283 = ORIENTED_EDGE('',*,*,#265427,.T.); +#270284 = ORIENTED_EDGE('',*,*,#270285,.T.); +#270285 = EDGE_CURVE('',#265428,#267327,#270286,.T.); +#270286 = LINE('',#270287,#270288); +#270287 = CARTESIAN_POINT('',(210.19165,-57.2981,-4.6E-02)); +#270288 = VECTOR('',#270289,1.); +#270289 = DIRECTION('',(0.,0.,1.)); +#270290 = ORIENTED_EDGE('',*,*,#267326,.F.); +#270291 = ORIENTED_EDGE('',*,*,#270285,.F.); +#270292 = CYLINDRICAL_SURFACE('',#270293,0.475); +#270293 = AXIS2_PLACEMENT_3D('',#270294,#270295,#270296); +#270294 = CARTESIAN_POINT('',(210.19165,-56.8231,-4.6E-02)); +#270295 = DIRECTION('',(-0.,0.,-1.)); +#270296 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270297 = ADVANCED_FACE('',(#270298),#270309,.F.); +#270298 = FACE_BOUND('',#270299,.T.); +#270299 = EDGE_LOOP('',(#270300,#270301,#270307,#270308)); +#270300 = ORIENTED_EDGE('',*,*,#265438,.T.); +#270301 = ORIENTED_EDGE('',*,*,#270302,.T.); +#270302 = EDGE_CURVE('',#265439,#267338,#270303,.T.); +#270303 = LINE('',#270304,#270305); +#270304 = CARTESIAN_POINT('',(210.19165,-54.7981,-4.6E-02)); +#270305 = VECTOR('',#270306,1.); +#270306 = DIRECTION('',(0.,0.,1.)); +#270307 = ORIENTED_EDGE('',*,*,#267337,.F.); +#270308 = ORIENTED_EDGE('',*,*,#270302,.F.); +#270309 = CYLINDRICAL_SURFACE('',#270310,0.475); +#270310 = AXIS2_PLACEMENT_3D('',#270311,#270312,#270313); +#270311 = CARTESIAN_POINT('',(210.19165,-54.3231,-4.6E-02)); +#270312 = DIRECTION('',(-0.,0.,-1.)); +#270313 = DIRECTION('',(5.983517774822E-14,-1.,-0.)); +#270314 = ADVANCED_FACE('',(#270315),#270326,.F.); +#270315 = FACE_BOUND('',#270316,.T.); +#270316 = EDGE_LOOP('',(#270317,#270318,#270324,#270325)); +#270317 = ORIENTED_EDGE('',*,*,#265449,.T.); +#270318 = ORIENTED_EDGE('',*,*,#270319,.T.); +#270319 = EDGE_CURVE('',#265450,#267349,#270320,.T.); +#270320 = LINE('',#270321,#270322); +#270321 = CARTESIAN_POINT('',(211.19165,-46.9231,-4.6E-02)); +#270322 = VECTOR('',#270323,1.); +#270323 = DIRECTION('',(0.,0.,1.)); +#270324 = ORIENTED_EDGE('',*,*,#267348,.F.); +#270325 = ORIENTED_EDGE('',*,*,#270319,.F.); +#270326 = CYLINDRICAL_SURFACE('',#270327,1.6); +#270327 = AXIS2_PLACEMENT_3D('',#270328,#270329,#270330); +#270328 = CARTESIAN_POINT('',(211.19165,-45.3231,-4.6E-02)); +#270329 = DIRECTION('',(-0.,0.,-1.)); +#270330 = DIRECTION('',(1.7763568394E-14,-1.,-0.)); +#270331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#270335)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#270332,#270333,#270334)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#270332 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#270333 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#270334 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#270335 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#270332, + 'distance_accuracy_value','confusion accuracy'); +#270336 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#270337,#270339); +#270337 = ( REPRESENTATION_RELATIONSHIP('','',#263458,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#270338) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#270338 = ITEM_DEFINED_TRANSFORMATION('','',#11,#511); +#270339 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #270340); +#270340 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('162','=>[0:1:1:73]','',#5, + #263453,$); +#270341 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#263455)); +#270342 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #270343,#270353,#270362,#270371,#270380,#270389,#270398,#270407, + #270416,#270425,#270434,#270444,#270453,#270462,#270471,#270480, + #270489,#270498,#270507,#270516,#270525,#270534,#270543,#270552, + #270561,#270570,#270579,#270588,#270597,#270606,#270615,#270624, + #270633,#270642,#270651,#270660,#270669,#270678,#270687,#270696, + #270705,#270714,#270723,#270732,#270741,#270750,#270759,#270768, + #270777,#270786,#270795,#270804,#270813,#270822,#270831,#270840, + #270849,#270858,#270867,#270876,#270885,#270894,#270903,#270912, + #270921,#270930,#270939,#270948,#270957,#270966,#270975,#270984, + #270993,#271002,#271011,#271020,#271029,#271038,#271047,#271056, + #271065,#271074,#271083,#271092,#271101,#271110,#271119,#271128, + #271137,#271146,#271155,#271164,#271173,#271182,#271191,#271200, + #271209,#271218,#271227,#271236,#271245,#271254,#271263,#271272, + #271281,#271290,#271299,#271308,#271317,#271326,#271335,#271344, + #271353,#271362,#271371,#271380,#271389,#271398,#271407,#271416, + #271425,#271434,#271443,#271452,#271461,#271470,#271479,#271488, + #271497,#271506,#271515,#271524,#271533,#271542,#271551,#271560, + #271569,#271578,#271587,#271596,#271605,#271614,#271623,#271632, + #271641,#271650,#271659,#271668,#271677,#271686,#271695,#271704), + #20279); +#270343 = STYLED_ITEM('color',(#270344),#15669); +#270344 = PRESENTATION_STYLE_ASSIGNMENT((#270345,#270351)); +#270345 = SURFACE_STYLE_USAGE(.BOTH.,#270346); +#270346 = SURFACE_SIDE_STYLE('',(#270347)); +#270347 = SURFACE_STYLE_FILL_AREA(#270348); +#270348 = FILL_AREA_STYLE('',(#270349)); +#270349 = FILL_AREA_STYLE_COLOUR('',#270350); +#270350 = COLOUR_RGB('',0.147999998088,0.144999993226,0.144999993226); +#270351 = CURVE_STYLE('',#270352,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270353 = STYLED_ITEM('color',(#270354),#15707); +#270354 = PRESENTATION_STYLE_ASSIGNMENT((#270355,#270360)); +#270355 = SURFACE_STYLE_USAGE(.BOTH.,#270356); +#270356 = SURFACE_SIDE_STYLE('',(#270357)); +#270357 = SURFACE_STYLE_FILL_AREA(#270358); +#270358 = FILL_AREA_STYLE('',(#270359)); +#270359 = FILL_AREA_STYLE_COLOUR('',#270350); +#270360 = CURVE_STYLE('',#270361,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270362 = STYLED_ITEM('color',(#270363),#15804); +#270363 = PRESENTATION_STYLE_ASSIGNMENT((#270364,#270369)); +#270364 = SURFACE_STYLE_USAGE(.BOTH.,#270365); +#270365 = SURFACE_SIDE_STYLE('',(#270366)); +#270366 = SURFACE_STYLE_FILL_AREA(#270367); +#270367 = FILL_AREA_STYLE('',(#270368)); +#270368 = FILL_AREA_STYLE_COLOUR('',#270350); +#270369 = CURVE_STYLE('',#270370,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270371 = STYLED_ITEM('color',(#270372),#15827); +#270372 = PRESENTATION_STYLE_ASSIGNMENT((#270373,#270378)); +#270373 = SURFACE_STYLE_USAGE(.BOTH.,#270374); +#270374 = SURFACE_SIDE_STYLE('',(#270375)); +#270375 = SURFACE_STYLE_FILL_AREA(#270376); +#270376 = FILL_AREA_STYLE('',(#270377)); +#270377 = FILL_AREA_STYLE_COLOUR('',#270350); +#270378 = CURVE_STYLE('',#270379,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270380 = STYLED_ITEM('color',(#270381),#15856); +#270381 = PRESENTATION_STYLE_ASSIGNMENT((#270382,#270387)); +#270382 = SURFACE_STYLE_USAGE(.BOTH.,#270383); +#270383 = SURFACE_SIDE_STYLE('',(#270384)); +#270384 = SURFACE_STYLE_FILL_AREA(#270385); +#270385 = FILL_AREA_STYLE('',(#270386)); +#270386 = FILL_AREA_STYLE_COLOUR('',#270350); +#270387 = CURVE_STYLE('',#270388,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270389 = STYLED_ITEM('color',(#270390),#15879); +#270390 = PRESENTATION_STYLE_ASSIGNMENT((#270391,#270396)); +#270391 = SURFACE_STYLE_USAGE(.BOTH.,#270392); +#270392 = SURFACE_SIDE_STYLE('',(#270393)); +#270393 = SURFACE_STYLE_FILL_AREA(#270394); +#270394 = FILL_AREA_STYLE('',(#270395)); +#270395 = FILL_AREA_STYLE_COLOUR('',#270350); +#270396 = CURVE_STYLE('',#270397,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270398 = STYLED_ITEM('color',(#270399),#15966); +#270399 = PRESENTATION_STYLE_ASSIGNMENT((#270400,#270405)); +#270400 = SURFACE_STYLE_USAGE(.BOTH.,#270401); +#270401 = SURFACE_SIDE_STYLE('',(#270402)); +#270402 = SURFACE_STYLE_FILL_AREA(#270403); +#270403 = FILL_AREA_STYLE('',(#270404)); +#270404 = FILL_AREA_STYLE_COLOUR('',#270350); +#270405 = CURVE_STYLE('',#270406,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270407 = STYLED_ITEM('color',(#270408),#16053); +#270408 = PRESENTATION_STYLE_ASSIGNMENT((#270409,#270414)); +#270409 = SURFACE_STYLE_USAGE(.BOTH.,#270410); +#270410 = SURFACE_SIDE_STYLE('',(#270411)); +#270411 = SURFACE_STYLE_FILL_AREA(#270412); +#270412 = FILL_AREA_STYLE('',(#270413)); +#270413 = FILL_AREA_STYLE_COLOUR('',#270350); +#270414 = CURVE_STYLE('',#270415,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270416 = STYLED_ITEM('color',(#270417),#16076); +#270417 = PRESENTATION_STYLE_ASSIGNMENT((#270418,#270423)); +#270418 = SURFACE_STYLE_USAGE(.BOTH.,#270419); +#270419 = SURFACE_SIDE_STYLE('',(#270420)); +#270420 = SURFACE_STYLE_FILL_AREA(#270421); +#270421 = FILL_AREA_STYLE('',(#270422)); +#270422 = FILL_AREA_STYLE_COLOUR('',#270350); +#270423 = CURVE_STYLE('',#270424,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270425 = STYLED_ITEM('color',(#270426),#16099); +#270426 = PRESENTATION_STYLE_ASSIGNMENT((#270427,#270432)); +#270427 = SURFACE_STYLE_USAGE(.BOTH.,#270428); +#270428 = SURFACE_SIDE_STYLE('',(#270429)); +#270429 = SURFACE_STYLE_FILL_AREA(#270430); +#270430 = FILL_AREA_STYLE('',(#270431)); +#270431 = FILL_AREA_STYLE_COLOUR('',#270350); +#270432 = CURVE_STYLE('',#270433,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270434 = STYLED_ITEM('color',(#270435),#16116); +#270435 = PRESENTATION_STYLE_ASSIGNMENT((#270436,#270442)); +#270436 = SURFACE_STYLE_USAGE(.BOTH.,#270437); +#270437 = SURFACE_SIDE_STYLE('',(#270438)); +#270438 = SURFACE_STYLE_FILL_AREA(#270439); +#270439 = FILL_AREA_STYLE('',(#270440)); +#270440 = FILL_AREA_STYLE_COLOUR('',#270441); +#270441 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244); +#270442 = CURVE_STYLE('',#270443,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270444 = STYLED_ITEM('color',(#270445),#16147); +#270445 = PRESENTATION_STYLE_ASSIGNMENT((#270446,#270451)); +#270446 = SURFACE_STYLE_USAGE(.BOTH.,#270447); +#270447 = SURFACE_SIDE_STYLE('',(#270448)); +#270448 = SURFACE_STYLE_FILL_AREA(#270449); +#270449 = FILL_AREA_STYLE('',(#270450)); +#270450 = FILL_AREA_STYLE_COLOUR('',#270441); +#270451 = CURVE_STYLE('',#270452,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270453 = STYLED_ITEM('color',(#270454),#16171); +#270454 = PRESENTATION_STYLE_ASSIGNMENT((#270455,#270460)); +#270455 = SURFACE_STYLE_USAGE(.BOTH.,#270456); +#270456 = SURFACE_SIDE_STYLE('',(#270457)); +#270457 = SURFACE_STYLE_FILL_AREA(#270458); +#270458 = FILL_AREA_STYLE('',(#270459)); +#270459 = FILL_AREA_STYLE_COLOUR('',#270441); +#270460 = CURVE_STYLE('',#270461,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270462 = STYLED_ITEM('color',(#270463),#16195); +#270463 = PRESENTATION_STYLE_ASSIGNMENT((#270464,#270469)); +#270464 = SURFACE_STYLE_USAGE(.BOTH.,#270465); +#270465 = SURFACE_SIDE_STYLE('',(#270466)); +#270466 = SURFACE_STYLE_FILL_AREA(#270467); +#270467 = FILL_AREA_STYLE('',(#270468)); +#270468 = FILL_AREA_STYLE_COLOUR('',#270441); +#270469 = CURVE_STYLE('',#270470,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270471 = STYLED_ITEM('color',(#270472),#16212); +#270472 = PRESENTATION_STYLE_ASSIGNMENT((#270473,#270478)); +#270473 = SURFACE_STYLE_USAGE(.BOTH.,#270474); +#270474 = SURFACE_SIDE_STYLE('',(#270475)); +#270475 = SURFACE_STYLE_FILL_AREA(#270476); +#270476 = FILL_AREA_STYLE('',(#270477)); +#270477 = FILL_AREA_STYLE_COLOUR('',#270350); +#270478 = CURVE_STYLE('',#270479,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270480 = STYLED_ITEM('color',(#270481),#16235); +#270481 = PRESENTATION_STYLE_ASSIGNMENT((#270482,#270487)); +#270482 = SURFACE_STYLE_USAGE(.BOTH.,#270483); +#270483 = SURFACE_SIDE_STYLE('',(#270484)); +#270484 = SURFACE_STYLE_FILL_AREA(#270485); +#270485 = FILL_AREA_STYLE('',(#270486)); +#270486 = FILL_AREA_STYLE_COLOUR('',#270350); +#270487 = CURVE_STYLE('',#270488,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270489 = STYLED_ITEM('color',(#270490),#16323); +#270490 = PRESENTATION_STYLE_ASSIGNMENT((#270491,#270496)); +#270491 = SURFACE_STYLE_USAGE(.BOTH.,#270492); +#270492 = SURFACE_SIDE_STYLE('',(#270493)); +#270493 = SURFACE_STYLE_FILL_AREA(#270494); +#270494 = FILL_AREA_STYLE('',(#270495)); +#270495 = FILL_AREA_STYLE_COLOUR('',#270350); +#270496 = CURVE_STYLE('',#270497,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270498 = STYLED_ITEM('color',(#270499),#16339); +#270499 = PRESENTATION_STYLE_ASSIGNMENT((#270500,#270505)); +#270500 = SURFACE_STYLE_USAGE(.BOTH.,#270501); +#270501 = SURFACE_SIDE_STYLE('',(#270502)); +#270502 = SURFACE_STYLE_FILL_AREA(#270503); +#270503 = FILL_AREA_STYLE('',(#270504)); +#270504 = FILL_AREA_STYLE_COLOUR('',#270350); +#270505 = CURVE_STYLE('',#270506,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270507 = STYLED_ITEM('color',(#270508),#16369); +#270508 = PRESENTATION_STYLE_ASSIGNMENT((#270509,#270514)); +#270509 = SURFACE_STYLE_USAGE(.BOTH.,#270510); +#270510 = SURFACE_SIDE_STYLE('',(#270511)); +#270511 = SURFACE_STYLE_FILL_AREA(#270512); +#270512 = FILL_AREA_STYLE('',(#270513)); +#270513 = FILL_AREA_STYLE_COLOUR('',#270441); +#270514 = CURVE_STYLE('',#270515,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270516 = STYLED_ITEM('color',(#270517),#16400); +#270517 = PRESENTATION_STYLE_ASSIGNMENT((#270518,#270523)); +#270518 = SURFACE_STYLE_USAGE(.BOTH.,#270519); +#270519 = SURFACE_SIDE_STYLE('',(#270520)); +#270520 = SURFACE_STYLE_FILL_AREA(#270521); +#270521 = FILL_AREA_STYLE('',(#270522)); +#270522 = FILL_AREA_STYLE_COLOUR('',#270350); +#270523 = CURVE_STYLE('',#270524,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270525 = STYLED_ITEM('color',(#270526),#16431); +#270526 = PRESENTATION_STYLE_ASSIGNMENT((#270527,#270532)); +#270527 = SURFACE_STYLE_USAGE(.BOTH.,#270528); +#270528 = SURFACE_SIDE_STYLE('',(#270529)); +#270529 = SURFACE_STYLE_FILL_AREA(#270530); +#270530 = FILL_AREA_STYLE('',(#270531)); +#270531 = FILL_AREA_STYLE_COLOUR('',#270441); +#270532 = CURVE_STYLE('',#270533,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270534 = STYLED_ITEM('color',(#270535),#16462); +#270535 = PRESENTATION_STYLE_ASSIGNMENT((#270536,#270541)); +#270536 = SURFACE_STYLE_USAGE(.BOTH.,#270537); +#270537 = SURFACE_SIDE_STYLE('',(#270538)); +#270538 = SURFACE_STYLE_FILL_AREA(#270539); +#270539 = FILL_AREA_STYLE('',(#270540)); +#270540 = FILL_AREA_STYLE_COLOUR('',#270350); +#270541 = CURVE_STYLE('',#270542,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270543 = STYLED_ITEM('color',(#270544),#16493); +#270544 = PRESENTATION_STYLE_ASSIGNMENT((#270545,#270550)); +#270545 = SURFACE_STYLE_USAGE(.BOTH.,#270546); +#270546 = SURFACE_SIDE_STYLE('',(#270547)); +#270547 = SURFACE_STYLE_FILL_AREA(#270548); +#270548 = FILL_AREA_STYLE('',(#270549)); +#270549 = FILL_AREA_STYLE_COLOUR('',#270441); +#270550 = CURVE_STYLE('',#270551,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270552 = STYLED_ITEM('color',(#270553),#16524); +#270553 = PRESENTATION_STYLE_ASSIGNMENT((#270554,#270559)); +#270554 = SURFACE_STYLE_USAGE(.BOTH.,#270555); +#270555 = SURFACE_SIDE_STYLE('',(#270556)); +#270556 = SURFACE_STYLE_FILL_AREA(#270557); +#270557 = FILL_AREA_STYLE('',(#270558)); +#270558 = FILL_AREA_STYLE_COLOUR('',#270350); +#270559 = CURVE_STYLE('',#270560,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270561 = STYLED_ITEM('color',(#270562),#16555); +#270562 = PRESENTATION_STYLE_ASSIGNMENT((#270563,#270568)); +#270563 = SURFACE_STYLE_USAGE(.BOTH.,#270564); +#270564 = SURFACE_SIDE_STYLE('',(#270565)); +#270565 = SURFACE_STYLE_FILL_AREA(#270566); +#270566 = FILL_AREA_STYLE('',(#270567)); +#270567 = FILL_AREA_STYLE_COLOUR('',#270441); +#270568 = CURVE_STYLE('',#270569,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270570 = STYLED_ITEM('color',(#270571),#16586); +#270571 = PRESENTATION_STYLE_ASSIGNMENT((#270572,#270577)); +#270572 = SURFACE_STYLE_USAGE(.BOTH.,#270573); +#270573 = SURFACE_SIDE_STYLE('',(#270574)); +#270574 = SURFACE_STYLE_FILL_AREA(#270575); +#270575 = FILL_AREA_STYLE('',(#270576)); +#270576 = FILL_AREA_STYLE_COLOUR('',#270350); +#270577 = CURVE_STYLE('',#270578,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270579 = STYLED_ITEM('color',(#270580),#16603); +#270580 = PRESENTATION_STYLE_ASSIGNMENT((#270581,#270586)); +#270581 = SURFACE_STYLE_USAGE(.BOTH.,#270582); +#270582 = SURFACE_SIDE_STYLE('',(#270583)); +#270583 = SURFACE_STYLE_FILL_AREA(#270584); +#270584 = FILL_AREA_STYLE('',(#270585)); +#270585 = FILL_AREA_STYLE_COLOUR('',#270350); +#270586 = CURVE_STYLE('',#270587,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270588 = STYLED_ITEM('color',(#270589),#16620); +#270589 = PRESENTATION_STYLE_ASSIGNMENT((#270590,#270595)); +#270590 = SURFACE_STYLE_USAGE(.BOTH.,#270591); +#270591 = SURFACE_SIDE_STYLE('',(#270592)); +#270592 = SURFACE_STYLE_FILL_AREA(#270593); +#270593 = FILL_AREA_STYLE('',(#270594)); +#270594 = FILL_AREA_STYLE_COLOUR('',#270441); +#270595 = CURVE_STYLE('',#270596,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270597 = STYLED_ITEM('color',(#270598),#16651); +#270598 = PRESENTATION_STYLE_ASSIGNMENT((#270599,#270604)); +#270599 = SURFACE_STYLE_USAGE(.BOTH.,#270600); +#270600 = SURFACE_SIDE_STYLE('',(#270601)); +#270601 = SURFACE_STYLE_FILL_AREA(#270602); +#270602 = FILL_AREA_STYLE('',(#270603)); +#270603 = FILL_AREA_STYLE_COLOUR('',#270350); +#270604 = CURVE_STYLE('',#270605,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270606 = STYLED_ITEM('color',(#270607),#16682); +#270607 = PRESENTATION_STYLE_ASSIGNMENT((#270608,#270613)); +#270608 = SURFACE_STYLE_USAGE(.BOTH.,#270609); +#270609 = SURFACE_SIDE_STYLE('',(#270610)); +#270610 = SURFACE_STYLE_FILL_AREA(#270611); +#270611 = FILL_AREA_STYLE('',(#270612)); +#270612 = FILL_AREA_STYLE_COLOUR('',#270441); +#270613 = CURVE_STYLE('',#270614,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270615 = STYLED_ITEM('color',(#270616),#16713); +#270616 = PRESENTATION_STYLE_ASSIGNMENT((#270617,#270622)); +#270617 = SURFACE_STYLE_USAGE(.BOTH.,#270618); +#270618 = SURFACE_SIDE_STYLE('',(#270619)); +#270619 = SURFACE_STYLE_FILL_AREA(#270620); +#270620 = FILL_AREA_STYLE('',(#270621)); +#270621 = FILL_AREA_STYLE_COLOUR('',#270350); +#270622 = CURVE_STYLE('',#270623,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270624 = STYLED_ITEM('color',(#270625),#16744); +#270625 = PRESENTATION_STYLE_ASSIGNMENT((#270626,#270631)); +#270626 = SURFACE_STYLE_USAGE(.BOTH.,#270627); +#270627 = SURFACE_SIDE_STYLE('',(#270628)); +#270628 = SURFACE_STYLE_FILL_AREA(#270629); +#270629 = FILL_AREA_STYLE('',(#270630)); +#270630 = FILL_AREA_STYLE_COLOUR('',#270441); +#270631 = CURVE_STYLE('',#270632,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270633 = STYLED_ITEM('color',(#270634),#16775); +#270634 = PRESENTATION_STYLE_ASSIGNMENT((#270635,#270640)); +#270635 = SURFACE_STYLE_USAGE(.BOTH.,#270636); +#270636 = SURFACE_SIDE_STYLE('',(#270637)); +#270637 = SURFACE_STYLE_FILL_AREA(#270638); +#270638 = FILL_AREA_STYLE('',(#270639)); +#270639 = FILL_AREA_STYLE_COLOUR('',#270350); +#270640 = CURVE_STYLE('',#270641,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270642 = STYLED_ITEM('color',(#270643),#16806); +#270643 = PRESENTATION_STYLE_ASSIGNMENT((#270644,#270649)); +#270644 = SURFACE_STYLE_USAGE(.BOTH.,#270645); +#270645 = SURFACE_SIDE_STYLE('',(#270646)); +#270646 = SURFACE_STYLE_FILL_AREA(#270647); +#270647 = FILL_AREA_STYLE('',(#270648)); +#270648 = FILL_AREA_STYLE_COLOUR('',#270441); +#270649 = CURVE_STYLE('',#270650,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270651 = STYLED_ITEM('color',(#270652),#16837); +#270652 = PRESENTATION_STYLE_ASSIGNMENT((#270653,#270658)); +#270653 = SURFACE_STYLE_USAGE(.BOTH.,#270654); +#270654 = SURFACE_SIDE_STYLE('',(#270655)); +#270655 = SURFACE_STYLE_FILL_AREA(#270656); +#270656 = FILL_AREA_STYLE('',(#270657)); +#270657 = FILL_AREA_STYLE_COLOUR('',#270350); +#270658 = CURVE_STYLE('',#270659,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270660 = STYLED_ITEM('color',(#270661),#16867); +#270661 = PRESENTATION_STYLE_ASSIGNMENT((#270662,#270667)); +#270662 = SURFACE_STYLE_USAGE(.BOTH.,#270663); +#270663 = SURFACE_SIDE_STYLE('',(#270664)); +#270664 = SURFACE_STYLE_FILL_AREA(#270665); +#270665 = FILL_AREA_STYLE('',(#270666)); +#270666 = FILL_AREA_STYLE_COLOUR('',#270350); +#270667 = CURVE_STYLE('',#270668,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270669 = STYLED_ITEM('color',(#270670),#16890); +#270670 = PRESENTATION_STYLE_ASSIGNMENT((#270671,#270676)); +#270671 = SURFACE_STYLE_USAGE(.BOTH.,#270672); +#270672 = SURFACE_SIDE_STYLE('',(#270673)); +#270673 = SURFACE_STYLE_FILL_AREA(#270674); +#270674 = FILL_AREA_STYLE('',(#270675)); +#270675 = FILL_AREA_STYLE_COLOUR('',#270350); +#270676 = CURVE_STYLE('',#270677,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270678 = STYLED_ITEM('color',(#270679),#16913); +#270679 = PRESENTATION_STYLE_ASSIGNMENT((#270680,#270685)); +#270680 = SURFACE_STYLE_USAGE(.BOTH.,#270681); +#270681 = SURFACE_SIDE_STYLE('',(#270682)); +#270682 = SURFACE_STYLE_FILL_AREA(#270683); +#270683 = FILL_AREA_STYLE('',(#270684)); +#270684 = FILL_AREA_STYLE_COLOUR('',#270350); +#270685 = CURVE_STYLE('',#270686,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270687 = STYLED_ITEM('color',(#270688),#16930); +#270688 = PRESENTATION_STYLE_ASSIGNMENT((#270689,#270694)); +#270689 = SURFACE_STYLE_USAGE(.BOTH.,#270690); +#270690 = SURFACE_SIDE_STYLE('',(#270691)); +#270691 = SURFACE_STYLE_FILL_AREA(#270692); +#270692 = FILL_AREA_STYLE('',(#270693)); +#270693 = FILL_AREA_STYLE_COLOUR('',#270441); +#270694 = CURVE_STYLE('',#270695,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270696 = STYLED_ITEM('color',(#270697),#16942); +#270697 = PRESENTATION_STYLE_ASSIGNMENT((#270698,#270703)); +#270698 = SURFACE_STYLE_USAGE(.BOTH.,#270699); +#270699 = SURFACE_SIDE_STYLE('',(#270700)); +#270700 = SURFACE_STYLE_FILL_AREA(#270701); +#270701 = FILL_AREA_STYLE('',(#270702)); +#270702 = FILL_AREA_STYLE_COLOUR('',#270441); +#270703 = CURVE_STYLE('',#270704,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270705 = STYLED_ITEM('color',(#270706),#16987); +#270706 = PRESENTATION_STYLE_ASSIGNMENT((#270707,#270712)); +#270707 = SURFACE_STYLE_USAGE(.BOTH.,#270708); +#270708 = SURFACE_SIDE_STYLE('',(#270709)); +#270709 = SURFACE_STYLE_FILL_AREA(#270710); +#270710 = FILL_AREA_STYLE('',(#270711)); +#270711 = FILL_AREA_STYLE_COLOUR('',#270350); +#270712 = CURVE_STYLE('',#270713,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270714 = STYLED_ITEM('color',(#270715),#17073); +#270715 = PRESENTATION_STYLE_ASSIGNMENT((#270716,#270721)); +#270716 = SURFACE_STYLE_USAGE(.BOTH.,#270717); +#270717 = SURFACE_SIDE_STYLE('',(#270718)); +#270718 = SURFACE_STYLE_FILL_AREA(#270719); +#270719 = FILL_AREA_STYLE('',(#270720)); +#270720 = FILL_AREA_STYLE_COLOUR('',#270350); +#270721 = CURVE_STYLE('',#270722,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270723 = STYLED_ITEM('color',(#270724),#17096); +#270724 = PRESENTATION_STYLE_ASSIGNMENT((#270725,#270730)); +#270725 = SURFACE_STYLE_USAGE(.BOTH.,#270726); +#270726 = SURFACE_SIDE_STYLE('',(#270727)); +#270727 = SURFACE_STYLE_FILL_AREA(#270728); +#270728 = FILL_AREA_STYLE('',(#270729)); +#270729 = FILL_AREA_STYLE_COLOUR('',#270350); +#270730 = CURVE_STYLE('',#270731,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270732 = STYLED_ITEM('color',(#270733),#17119); +#270733 = PRESENTATION_STYLE_ASSIGNMENT((#270734,#270739)); +#270734 = SURFACE_STYLE_USAGE(.BOTH.,#270735); +#270735 = SURFACE_SIDE_STYLE('',(#270736)); +#270736 = SURFACE_STYLE_FILL_AREA(#270737); +#270737 = FILL_AREA_STYLE('',(#270738)); +#270738 = FILL_AREA_STYLE_COLOUR('',#270350); +#270739 = CURVE_STYLE('',#270740,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270741 = STYLED_ITEM('color',(#270742),#17142); +#270742 = PRESENTATION_STYLE_ASSIGNMENT((#270743,#270748)); +#270743 = SURFACE_STYLE_USAGE(.BOTH.,#270744); +#270744 = SURFACE_SIDE_STYLE('',(#270745)); +#270745 = SURFACE_STYLE_FILL_AREA(#270746); +#270746 = FILL_AREA_STYLE('',(#270747)); +#270747 = FILL_AREA_STYLE_COLOUR('',#270350); +#270748 = CURVE_STYLE('',#270749,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270750 = STYLED_ITEM('color',(#270751),#17229); +#270751 = PRESENTATION_STYLE_ASSIGNMENT((#270752,#270757)); +#270752 = SURFACE_STYLE_USAGE(.BOTH.,#270753); +#270753 = SURFACE_SIDE_STYLE('',(#270754)); +#270754 = SURFACE_STYLE_FILL_AREA(#270755); +#270755 = FILL_AREA_STYLE('',(#270756)); +#270756 = FILL_AREA_STYLE_COLOUR('',#270441); +#270757 = CURVE_STYLE('',#270758,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270759 = STYLED_ITEM('color',(#270760),#17267); +#270760 = PRESENTATION_STYLE_ASSIGNMENT((#270761,#270766)); +#270761 = SURFACE_STYLE_USAGE(.BOTH.,#270762); +#270762 = SURFACE_SIDE_STYLE('',(#270763)); +#270763 = SURFACE_STYLE_FILL_AREA(#270764); +#270764 = FILL_AREA_STYLE('',(#270765)); +#270765 = FILL_AREA_STYLE_COLOUR('',#270350); +#270766 = CURVE_STYLE('',#270767,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270768 = STYLED_ITEM('color',(#270769),#17316); +#270769 = PRESENTATION_STYLE_ASSIGNMENT((#270770,#270775)); +#270770 = SURFACE_STYLE_USAGE(.BOTH.,#270771); +#270771 = SURFACE_SIDE_STYLE('',(#270772)); +#270772 = SURFACE_STYLE_FILL_AREA(#270773); +#270773 = FILL_AREA_STYLE('',(#270774)); +#270774 = FILL_AREA_STYLE_COLOUR('',#270441); +#270775 = CURVE_STYLE('',#270776,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270777 = STYLED_ITEM('color',(#270778),#17408); +#270778 = PRESENTATION_STYLE_ASSIGNMENT((#270779,#270784)); +#270779 = SURFACE_STYLE_USAGE(.BOTH.,#270780); +#270780 = SURFACE_SIDE_STYLE('',(#270781)); +#270781 = SURFACE_STYLE_FILL_AREA(#270782); +#270782 = FILL_AREA_STYLE('',(#270783)); +#270783 = FILL_AREA_STYLE_COLOUR('',#270441); +#270784 = CURVE_STYLE('',#270785,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270786 = STYLED_ITEM('color',(#270787),#17433); +#270787 = PRESENTATION_STYLE_ASSIGNMENT((#270788,#270793)); +#270788 = SURFACE_STYLE_USAGE(.BOTH.,#270789); +#270789 = SURFACE_SIDE_STYLE('',(#270790)); +#270790 = SURFACE_STYLE_FILL_AREA(#270791); +#270791 = FILL_AREA_STYLE('',(#270792)); +#270792 = FILL_AREA_STYLE_COLOUR('',#270441); +#270793 = CURVE_STYLE('',#270794,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270795 = STYLED_ITEM('color',(#270796),#17517); +#270796 = PRESENTATION_STYLE_ASSIGNMENT((#270797,#270802)); +#270797 = SURFACE_STYLE_USAGE(.BOTH.,#270798); +#270798 = SURFACE_SIDE_STYLE('',(#270799)); +#270799 = SURFACE_STYLE_FILL_AREA(#270800); +#270800 = FILL_AREA_STYLE('',(#270801)); +#270801 = FILL_AREA_STYLE_COLOUR('',#270350); +#270802 = CURVE_STYLE('',#270803,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270804 = STYLED_ITEM('color',(#270805),#17539); +#270805 = PRESENTATION_STYLE_ASSIGNMENT((#270806,#270811)); +#270806 = SURFACE_STYLE_USAGE(.BOTH.,#270807); +#270807 = SURFACE_SIDE_STYLE('',(#270808)); +#270808 = SURFACE_STYLE_FILL_AREA(#270809); +#270809 = FILL_AREA_STYLE('',(#270810)); +#270810 = FILL_AREA_STYLE_COLOUR('',#270441); +#270811 = CURVE_STYLE('',#270812,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270813 = STYLED_ITEM('color',(#270814),#17631); +#270814 = PRESENTATION_STYLE_ASSIGNMENT((#270815,#270820)); +#270815 = SURFACE_STYLE_USAGE(.BOTH.,#270816); +#270816 = SURFACE_SIDE_STYLE('',(#270817)); +#270817 = SURFACE_STYLE_FILL_AREA(#270818); +#270818 = FILL_AREA_STYLE('',(#270819)); +#270819 = FILL_AREA_STYLE_COLOUR('',#270441); +#270820 = CURVE_STYLE('',#270821,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270822 = STYLED_ITEM('color',(#270823),#17656); +#270823 = PRESENTATION_STYLE_ASSIGNMENT((#270824,#270829)); +#270824 = SURFACE_STYLE_USAGE(.BOTH.,#270825); +#270825 = SURFACE_SIDE_STYLE('',(#270826)); +#270826 = SURFACE_STYLE_FILL_AREA(#270827); +#270827 = FILL_AREA_STYLE('',(#270828)); +#270828 = FILL_AREA_STYLE_COLOUR('',#270441); +#270829 = CURVE_STYLE('',#270830,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270831 = STYLED_ITEM('color',(#270832),#17740); +#270832 = PRESENTATION_STYLE_ASSIGNMENT((#270833,#270838)); +#270833 = SURFACE_STYLE_USAGE(.BOTH.,#270834); +#270834 = SURFACE_SIDE_STYLE('',(#270835)); +#270835 = SURFACE_STYLE_FILL_AREA(#270836); +#270836 = FILL_AREA_STYLE('',(#270837)); +#270837 = FILL_AREA_STYLE_COLOUR('',#270350); +#270838 = CURVE_STYLE('',#270839,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270840 = STYLED_ITEM('color',(#270841),#17762); +#270841 = PRESENTATION_STYLE_ASSIGNMENT((#270842,#270847)); +#270842 = SURFACE_STYLE_USAGE(.BOTH.,#270843); +#270843 = SURFACE_SIDE_STYLE('',(#270844)); +#270844 = SURFACE_STYLE_FILL_AREA(#270845); +#270845 = FILL_AREA_STYLE('',(#270846)); +#270846 = FILL_AREA_STYLE_COLOUR('',#270441); +#270847 = CURVE_STYLE('',#270848,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270849 = STYLED_ITEM('color',(#270850),#17854); +#270850 = PRESENTATION_STYLE_ASSIGNMENT((#270851,#270856)); +#270851 = SURFACE_STYLE_USAGE(.BOTH.,#270852); +#270852 = SURFACE_SIDE_STYLE('',(#270853)); +#270853 = SURFACE_STYLE_FILL_AREA(#270854); +#270854 = FILL_AREA_STYLE('',(#270855)); +#270855 = FILL_AREA_STYLE_COLOUR('',#270441); +#270856 = CURVE_STYLE('',#270857,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270858 = STYLED_ITEM('color',(#270859),#17879); +#270859 = PRESENTATION_STYLE_ASSIGNMENT((#270860,#270865)); +#270860 = SURFACE_STYLE_USAGE(.BOTH.,#270861); +#270861 = SURFACE_SIDE_STYLE('',(#270862)); +#270862 = SURFACE_STYLE_FILL_AREA(#270863); +#270863 = FILL_AREA_STYLE('',(#270864)); +#270864 = FILL_AREA_STYLE_COLOUR('',#270441); +#270865 = CURVE_STYLE('',#270866,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270867 = STYLED_ITEM('color',(#270868),#17963); +#270868 = PRESENTATION_STYLE_ASSIGNMENT((#270869,#270874)); +#270869 = SURFACE_STYLE_USAGE(.BOTH.,#270870); +#270870 = SURFACE_SIDE_STYLE('',(#270871)); +#270871 = SURFACE_STYLE_FILL_AREA(#270872); +#270872 = FILL_AREA_STYLE('',(#270873)); +#270873 = FILL_AREA_STYLE_COLOUR('',#270350); +#270874 = CURVE_STYLE('',#270875,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270876 = STYLED_ITEM('color',(#270877),#17980); +#270877 = PRESENTATION_STYLE_ASSIGNMENT((#270878,#270883)); +#270878 = SURFACE_STYLE_USAGE(.BOTH.,#270879); +#270879 = SURFACE_SIDE_STYLE('',(#270880)); +#270880 = SURFACE_STYLE_FILL_AREA(#270881); +#270881 = FILL_AREA_STYLE('',(#270882)); +#270882 = FILL_AREA_STYLE_COLOUR('',#270441); +#270883 = CURVE_STYLE('',#270884,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270885 = STYLED_ITEM('color',(#270886),#18065); +#270886 = PRESENTATION_STYLE_ASSIGNMENT((#270887,#270892)); +#270887 = SURFACE_STYLE_USAGE(.BOTH.,#270888); +#270888 = SURFACE_SIDE_STYLE('',(#270889)); +#270889 = SURFACE_STYLE_FILL_AREA(#270890); +#270890 = FILL_AREA_STYLE('',(#270891)); +#270891 = FILL_AREA_STYLE_COLOUR('',#270441); +#270892 = CURVE_STYLE('',#270893,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270894 = STYLED_ITEM('color',(#270895),#18090); +#270895 = PRESENTATION_STYLE_ASSIGNMENT((#270896,#270901)); +#270896 = SURFACE_STYLE_USAGE(.BOTH.,#270897); +#270897 = SURFACE_SIDE_STYLE('',(#270898)); +#270898 = SURFACE_STYLE_FILL_AREA(#270899); +#270899 = FILL_AREA_STYLE('',(#270900)); +#270900 = FILL_AREA_STYLE_COLOUR('',#270441); +#270901 = CURVE_STYLE('',#270902,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270903 = STYLED_ITEM('color',(#270904),#18167); +#270904 = PRESENTATION_STYLE_ASSIGNMENT((#270905,#270910)); +#270905 = SURFACE_STYLE_USAGE(.BOTH.,#270906); +#270906 = SURFACE_SIDE_STYLE('',(#270907)); +#270907 = SURFACE_STYLE_FILL_AREA(#270908); +#270908 = FILL_AREA_STYLE('',(#270909)); +#270909 = FILL_AREA_STYLE_COLOUR('',#270441); +#270910 = CURVE_STYLE('',#270911,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270912 = STYLED_ITEM('color',(#270913),#18252); +#270913 = PRESENTATION_STYLE_ASSIGNMENT((#270914,#270919)); +#270914 = SURFACE_STYLE_USAGE(.BOTH.,#270915); +#270915 = SURFACE_SIDE_STYLE('',(#270916)); +#270916 = SURFACE_STYLE_FILL_AREA(#270917); +#270917 = FILL_AREA_STYLE('',(#270918)); +#270918 = FILL_AREA_STYLE_COLOUR('',#270441); +#270919 = CURVE_STYLE('',#270920,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270921 = STYLED_ITEM('color',(#270922),#18277); +#270922 = PRESENTATION_STYLE_ASSIGNMENT((#270923,#270928)); +#270923 = SURFACE_STYLE_USAGE(.BOTH.,#270924); +#270924 = SURFACE_SIDE_STYLE('',(#270925)); +#270925 = SURFACE_STYLE_FILL_AREA(#270926); +#270926 = FILL_AREA_STYLE('',(#270927)); +#270927 = FILL_AREA_STYLE_COLOUR('',#270441); +#270928 = CURVE_STYLE('',#270929,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270930 = STYLED_ITEM('color',(#270931),#18354); +#270931 = PRESENTATION_STYLE_ASSIGNMENT((#270932,#270937)); +#270932 = SURFACE_STYLE_USAGE(.BOTH.,#270933); +#270933 = SURFACE_SIDE_STYLE('',(#270934)); +#270934 = SURFACE_STYLE_FILL_AREA(#270935); +#270935 = FILL_AREA_STYLE('',(#270936)); +#270936 = FILL_AREA_STYLE_COLOUR('',#270350); +#270937 = CURVE_STYLE('',#270938,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270939 = STYLED_ITEM('color',(#270940),#18371); +#270940 = PRESENTATION_STYLE_ASSIGNMENT((#270941,#270946)); +#270941 = SURFACE_STYLE_USAGE(.BOTH.,#270942); +#270942 = SURFACE_SIDE_STYLE('',(#270943)); +#270943 = SURFACE_STYLE_FILL_AREA(#270944); +#270944 = FILL_AREA_STYLE('',(#270945)); +#270945 = FILL_AREA_STYLE_COLOUR('',#270441); +#270946 = CURVE_STYLE('',#270947,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270948 = STYLED_ITEM('color',(#270949),#18463); +#270949 = PRESENTATION_STYLE_ASSIGNMENT((#270950,#270955)); +#270950 = SURFACE_STYLE_USAGE(.BOTH.,#270951); +#270951 = SURFACE_SIDE_STYLE('',(#270952)); +#270952 = SURFACE_STYLE_FILL_AREA(#270953); +#270953 = FILL_AREA_STYLE('',(#270954)); +#270954 = FILL_AREA_STYLE_COLOUR('',#270441); +#270955 = CURVE_STYLE('',#270956,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270957 = STYLED_ITEM('color',(#270958),#18488); +#270958 = PRESENTATION_STYLE_ASSIGNMENT((#270959,#270964)); +#270959 = SURFACE_STYLE_USAGE(.BOTH.,#270960); +#270960 = SURFACE_SIDE_STYLE('',(#270961)); +#270961 = SURFACE_STYLE_FILL_AREA(#270962); +#270962 = FILL_AREA_STYLE('',(#270963)); +#270963 = FILL_AREA_STYLE_COLOUR('',#270441); +#270964 = CURVE_STYLE('',#270965,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270966 = STYLED_ITEM('color',(#270967),#18572); +#270967 = PRESENTATION_STYLE_ASSIGNMENT((#270968,#270973)); +#270968 = SURFACE_STYLE_USAGE(.BOTH.,#270969); +#270969 = SURFACE_SIDE_STYLE('',(#270970)); +#270970 = SURFACE_STYLE_FILL_AREA(#270971); +#270971 = FILL_AREA_STYLE('',(#270972)); +#270972 = FILL_AREA_STYLE_COLOUR('',#270350); +#270973 = CURVE_STYLE('',#270974,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#270974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270975 = STYLED_ITEM('color',(#270976),#18594); +#270976 = PRESENTATION_STYLE_ASSIGNMENT((#270977,#270982)); +#270977 = SURFACE_STYLE_USAGE(.BOTH.,#270978); +#270978 = SURFACE_SIDE_STYLE('',(#270979)); +#270979 = SURFACE_STYLE_FILL_AREA(#270980); +#270980 = FILL_AREA_STYLE('',(#270981)); +#270981 = FILL_AREA_STYLE_COLOUR('',#270441); +#270982 = CURVE_STYLE('',#270983,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270984 = STYLED_ITEM('color',(#270985),#18686); +#270985 = PRESENTATION_STYLE_ASSIGNMENT((#270986,#270991)); +#270986 = SURFACE_STYLE_USAGE(.BOTH.,#270987); +#270987 = SURFACE_SIDE_STYLE('',(#270988)); +#270988 = SURFACE_STYLE_FILL_AREA(#270989); +#270989 = FILL_AREA_STYLE('',(#270990)); +#270990 = FILL_AREA_STYLE_COLOUR('',#270441); +#270991 = CURVE_STYLE('',#270992,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#270992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#270993 = STYLED_ITEM('color',(#270994),#18711); +#270994 = PRESENTATION_STYLE_ASSIGNMENT((#270995,#271000)); +#270995 = SURFACE_STYLE_USAGE(.BOTH.,#270996); +#270996 = SURFACE_SIDE_STYLE('',(#270997)); +#270997 = SURFACE_STYLE_FILL_AREA(#270998); +#270998 = FILL_AREA_STYLE('',(#270999)); +#270999 = FILL_AREA_STYLE_COLOUR('',#270441); +#271000 = CURVE_STYLE('',#271001,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271002 = STYLED_ITEM('color',(#271003),#18795); +#271003 = PRESENTATION_STYLE_ASSIGNMENT((#271004,#271009)); +#271004 = SURFACE_STYLE_USAGE(.BOTH.,#271005); +#271005 = SURFACE_SIDE_STYLE('',(#271006)); +#271006 = SURFACE_STYLE_FILL_AREA(#271007); +#271007 = FILL_AREA_STYLE('',(#271008)); +#271008 = FILL_AREA_STYLE_COLOUR('',#270350); +#271009 = CURVE_STYLE('',#271010,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#271010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271011 = STYLED_ITEM('color',(#271012),#18817); +#271012 = PRESENTATION_STYLE_ASSIGNMENT((#271013,#271018)); +#271013 = SURFACE_STYLE_USAGE(.BOTH.,#271014); +#271014 = SURFACE_SIDE_STYLE('',(#271015)); +#271015 = SURFACE_STYLE_FILL_AREA(#271016); +#271016 = FILL_AREA_STYLE('',(#271017)); +#271017 = FILL_AREA_STYLE_COLOUR('',#270441); +#271018 = CURVE_STYLE('',#271019,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271020 = STYLED_ITEM('color',(#271021),#18909); +#271021 = PRESENTATION_STYLE_ASSIGNMENT((#271022,#271027)); +#271022 = SURFACE_STYLE_USAGE(.BOTH.,#271023); +#271023 = SURFACE_SIDE_STYLE('',(#271024)); +#271024 = SURFACE_STYLE_FILL_AREA(#271025); +#271025 = FILL_AREA_STYLE('',(#271026)); +#271026 = FILL_AREA_STYLE_COLOUR('',#270441); +#271027 = CURVE_STYLE('',#271028,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271029 = STYLED_ITEM('color',(#271030),#18934); +#271030 = PRESENTATION_STYLE_ASSIGNMENT((#271031,#271036)); +#271031 = SURFACE_STYLE_USAGE(.BOTH.,#271032); +#271032 = SURFACE_SIDE_STYLE('',(#271033)); +#271033 = SURFACE_STYLE_FILL_AREA(#271034); +#271034 = FILL_AREA_STYLE('',(#271035)); +#271035 = FILL_AREA_STYLE_COLOUR('',#270441); +#271036 = CURVE_STYLE('',#271037,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271038 = STYLED_ITEM('color',(#271039),#19018); +#271039 = PRESENTATION_STYLE_ASSIGNMENT((#271040,#271045)); +#271040 = SURFACE_STYLE_USAGE(.BOTH.,#271041); +#271041 = SURFACE_SIDE_STYLE('',(#271042)); +#271042 = SURFACE_STYLE_FILL_AREA(#271043); +#271043 = FILL_AREA_STYLE('',(#271044)); +#271044 = FILL_AREA_STYLE_COLOUR('',#270441); +#271045 = CURVE_STYLE('',#271046,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271047 = STYLED_ITEM('color',(#271048),#19035); +#271048 = PRESENTATION_STYLE_ASSIGNMENT((#271049,#271054)); +#271049 = SURFACE_STYLE_USAGE(.BOTH.,#271050); +#271050 = SURFACE_SIDE_STYLE('',(#271051)); +#271051 = SURFACE_STYLE_FILL_AREA(#271052); +#271052 = FILL_AREA_STYLE('',(#271053)); +#271053 = FILL_AREA_STYLE_COLOUR('',#270441); +#271054 = CURVE_STYLE('',#271055,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271056 = STYLED_ITEM('color',(#271057),#19054); +#271057 = PRESENTATION_STYLE_ASSIGNMENT((#271058,#271063)); +#271058 = SURFACE_STYLE_USAGE(.BOTH.,#271059); +#271059 = SURFACE_SIDE_STYLE('',(#271060)); +#271060 = SURFACE_STYLE_FILL_AREA(#271061); +#271061 = FILL_AREA_STYLE('',(#271062)); +#271062 = FILL_AREA_STYLE_COLOUR('',#270441); +#271063 = CURVE_STYLE('',#271064,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271065 = STYLED_ITEM('color',(#271066),#19073); +#271066 = PRESENTATION_STYLE_ASSIGNMENT((#271067,#271072)); +#271067 = SURFACE_STYLE_USAGE(.BOTH.,#271068); +#271068 = SURFACE_SIDE_STYLE('',(#271069)); +#271069 = SURFACE_STYLE_FILL_AREA(#271070); +#271070 = FILL_AREA_STYLE('',(#271071)); +#271071 = FILL_AREA_STYLE_COLOUR('',#270441); +#271072 = CURVE_STYLE('',#271073,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271074 = STYLED_ITEM('color',(#271075),#19092); +#271075 = PRESENTATION_STYLE_ASSIGNMENT((#271076,#271081)); +#271076 = SURFACE_STYLE_USAGE(.BOTH.,#271077); +#271077 = SURFACE_SIDE_STYLE('',(#271078)); +#271078 = SURFACE_STYLE_FILL_AREA(#271079); +#271079 = FILL_AREA_STYLE('',(#271080)); +#271080 = FILL_AREA_STYLE_COLOUR('',#270350); +#271081 = CURVE_STYLE('',#271082,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#271082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271083 = STYLED_ITEM('color',(#271084),#19138); +#271084 = PRESENTATION_STYLE_ASSIGNMENT((#271085,#271090)); +#271085 = SURFACE_STYLE_USAGE(.BOTH.,#271086); +#271086 = SURFACE_SIDE_STYLE('',(#271087)); +#271087 = SURFACE_STYLE_FILL_AREA(#271088); +#271088 = FILL_AREA_STYLE('',(#271089)); +#271089 = FILL_AREA_STYLE_COLOUR('',#270350); +#271090 = CURVE_STYLE('',#271091,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#271091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271092 = STYLED_ITEM('color',(#271093),#19154); +#271093 = PRESENTATION_STYLE_ASSIGNMENT((#271094,#271099)); +#271094 = SURFACE_STYLE_USAGE(.BOTH.,#271095); +#271095 = SURFACE_SIDE_STYLE('',(#271096)); +#271096 = SURFACE_STYLE_FILL_AREA(#271097); +#271097 = FILL_AREA_STYLE('',(#271098)); +#271098 = FILL_AREA_STYLE_COLOUR('',#270441); +#271099 = CURVE_STYLE('',#271100,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271101 = STYLED_ITEM('color',(#271102),#19173); +#271102 = PRESENTATION_STYLE_ASSIGNMENT((#271103,#271108)); +#271103 = SURFACE_STYLE_USAGE(.BOTH.,#271104); +#271104 = SURFACE_SIDE_STYLE('',(#271105)); +#271105 = SURFACE_STYLE_FILL_AREA(#271106); +#271106 = FILL_AREA_STYLE('',(#271107)); +#271107 = FILL_AREA_STYLE_COLOUR('',#270441); +#271108 = CURVE_STYLE('',#271109,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271110 = STYLED_ITEM('color',(#271111),#19192); +#271111 = PRESENTATION_STYLE_ASSIGNMENT((#271112,#271117)); +#271112 = SURFACE_STYLE_USAGE(.BOTH.,#271113); +#271113 = SURFACE_SIDE_STYLE('',(#271114)); +#271114 = SURFACE_STYLE_FILL_AREA(#271115); +#271115 = FILL_AREA_STYLE('',(#271116)); +#271116 = FILL_AREA_STYLE_COLOUR('',#270441); +#271117 = CURVE_STYLE('',#271118,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271119 = STYLED_ITEM('color',(#271120),#19211); +#271120 = PRESENTATION_STYLE_ASSIGNMENT((#271121,#271126)); +#271121 = SURFACE_STYLE_USAGE(.BOTH.,#271122); +#271122 = SURFACE_SIDE_STYLE('',(#271123)); +#271123 = SURFACE_STYLE_FILL_AREA(#271124); +#271124 = FILL_AREA_STYLE('',(#271125)); +#271125 = FILL_AREA_STYLE_COLOUR('',#270350); +#271126 = CURVE_STYLE('',#271127,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#271127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271128 = STYLED_ITEM('color',(#271129),#19227); +#271129 = PRESENTATION_STYLE_ASSIGNMENT((#271130,#271135)); +#271130 = SURFACE_STYLE_USAGE(.BOTH.,#271131); +#271131 = SURFACE_SIDE_STYLE('',(#271132)); +#271132 = SURFACE_STYLE_FILL_AREA(#271133); +#271133 = FILL_AREA_STYLE('',(#271134)); +#271134 = FILL_AREA_STYLE_COLOUR('',#270441); +#271135 = CURVE_STYLE('',#271136,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271137 = STYLED_ITEM('color',(#271138),#19244); +#271138 = PRESENTATION_STYLE_ASSIGNMENT((#271139,#271144)); +#271139 = SURFACE_STYLE_USAGE(.BOTH.,#271140); +#271140 = SURFACE_SIDE_STYLE('',(#271141)); +#271141 = SURFACE_STYLE_FILL_AREA(#271142); +#271142 = FILL_AREA_STYLE('',(#271143)); +#271143 = FILL_AREA_STYLE_COLOUR('',#270350); +#271144 = CURVE_STYLE('',#271145,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#271145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271146 = STYLED_ITEM('color',(#271147),#19256); +#271147 = PRESENTATION_STYLE_ASSIGNMENT((#271148,#271153)); +#271148 = SURFACE_STYLE_USAGE(.BOTH.,#271149); +#271149 = SURFACE_SIDE_STYLE('',(#271150)); +#271150 = SURFACE_STYLE_FILL_AREA(#271151); +#271151 = FILL_AREA_STYLE('',(#271152)); +#271152 = FILL_AREA_STYLE_COLOUR('',#270441); +#271153 = CURVE_STYLE('',#271154,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271155 = STYLED_ITEM('color',(#271156),#19273); +#271156 = PRESENTATION_STYLE_ASSIGNMENT((#271157,#271162)); +#271157 = SURFACE_STYLE_USAGE(.BOTH.,#271158); +#271158 = SURFACE_SIDE_STYLE('',(#271159)); +#271159 = SURFACE_STYLE_FILL_AREA(#271160); +#271160 = FILL_AREA_STYLE('',(#271161)); +#271161 = FILL_AREA_STYLE_COLOUR('',#270441); +#271162 = CURVE_STYLE('',#271163,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271164 = STYLED_ITEM('color',(#271165),#19290); +#271165 = PRESENTATION_STYLE_ASSIGNMENT((#271166,#271171)); +#271166 = SURFACE_STYLE_USAGE(.BOTH.,#271167); +#271167 = SURFACE_SIDE_STYLE('',(#271168)); +#271168 = SURFACE_STYLE_FILL_AREA(#271169); +#271169 = FILL_AREA_STYLE('',(#271170)); +#271170 = FILL_AREA_STYLE_COLOUR('',#270441); +#271171 = CURVE_STYLE('',#271172,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271173 = STYLED_ITEM('color',(#271174),#19307); +#271174 = PRESENTATION_STYLE_ASSIGNMENT((#271175,#271180)); +#271175 = SURFACE_STYLE_USAGE(.BOTH.,#271176); +#271176 = SURFACE_SIDE_STYLE('',(#271177)); +#271177 = SURFACE_STYLE_FILL_AREA(#271178); +#271178 = FILL_AREA_STYLE('',(#271179)); +#271179 = FILL_AREA_STYLE_COLOUR('',#270441); +#271180 = CURVE_STYLE('',#271181,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271182 = STYLED_ITEM('color',(#271183),#19324); +#271183 = PRESENTATION_STYLE_ASSIGNMENT((#271184,#271189)); +#271184 = SURFACE_STYLE_USAGE(.BOTH.,#271185); +#271185 = SURFACE_SIDE_STYLE('',(#271186)); +#271186 = SURFACE_STYLE_FILL_AREA(#271187); +#271187 = FILL_AREA_STYLE('',(#271188)); +#271188 = FILL_AREA_STYLE_COLOUR('',#270441); +#271189 = CURVE_STYLE('',#271190,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271191 = STYLED_ITEM('color',(#271192),#19341); +#271192 = PRESENTATION_STYLE_ASSIGNMENT((#271193,#271198)); +#271193 = SURFACE_STYLE_USAGE(.BOTH.,#271194); +#271194 = SURFACE_SIDE_STYLE('',(#271195)); +#271195 = SURFACE_STYLE_FILL_AREA(#271196); +#271196 = FILL_AREA_STYLE('',(#271197)); +#271197 = FILL_AREA_STYLE_COLOUR('',#270441); +#271198 = CURVE_STYLE('',#271199,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271200 = STYLED_ITEM('color',(#271201),#19358); +#271201 = PRESENTATION_STYLE_ASSIGNMENT((#271202,#271207)); +#271202 = SURFACE_STYLE_USAGE(.BOTH.,#271203); +#271203 = SURFACE_SIDE_STYLE('',(#271204)); +#271204 = SURFACE_STYLE_FILL_AREA(#271205); +#271205 = FILL_AREA_STYLE('',(#271206)); +#271206 = FILL_AREA_STYLE_COLOUR('',#270441); +#271207 = CURVE_STYLE('',#271208,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271209 = STYLED_ITEM('color',(#271210),#19375); +#271210 = PRESENTATION_STYLE_ASSIGNMENT((#271211,#271216)); +#271211 = SURFACE_STYLE_USAGE(.BOTH.,#271212); +#271212 = SURFACE_SIDE_STYLE('',(#271213)); +#271213 = SURFACE_STYLE_FILL_AREA(#271214); +#271214 = FILL_AREA_STYLE('',(#271215)); +#271215 = FILL_AREA_STYLE_COLOUR('',#270441); +#271216 = CURVE_STYLE('',#271217,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271218 = STYLED_ITEM('color',(#271219),#19387); +#271219 = PRESENTATION_STYLE_ASSIGNMENT((#271220,#271225)); +#271220 = SURFACE_STYLE_USAGE(.BOTH.,#271221); +#271221 = SURFACE_SIDE_STYLE('',(#271222)); +#271222 = SURFACE_STYLE_FILL_AREA(#271223); +#271223 = FILL_AREA_STYLE('',(#271224)); +#271224 = FILL_AREA_STYLE_COLOUR('',#270441); +#271225 = CURVE_STYLE('',#271226,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271227 = STYLED_ITEM('color',(#271228),#19404); +#271228 = PRESENTATION_STYLE_ASSIGNMENT((#271229,#271234)); +#271229 = SURFACE_STYLE_USAGE(.BOTH.,#271230); +#271230 = SURFACE_SIDE_STYLE('',(#271231)); +#271231 = SURFACE_STYLE_FILL_AREA(#271232); +#271232 = FILL_AREA_STYLE('',(#271233)); +#271233 = FILL_AREA_STYLE_COLOUR('',#270441); +#271234 = CURVE_STYLE('',#271235,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271236 = STYLED_ITEM('color',(#271237),#19421); +#271237 = PRESENTATION_STYLE_ASSIGNMENT((#271238,#271243)); +#271238 = SURFACE_STYLE_USAGE(.BOTH.,#271239); +#271239 = SURFACE_SIDE_STYLE('',(#271240)); +#271240 = SURFACE_STYLE_FILL_AREA(#271241); +#271241 = FILL_AREA_STYLE('',(#271242)); +#271242 = FILL_AREA_STYLE_COLOUR('',#270441); +#271243 = CURVE_STYLE('',#271244,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271245 = STYLED_ITEM('color',(#271246),#19438); +#271246 = PRESENTATION_STYLE_ASSIGNMENT((#271247,#271252)); +#271247 = SURFACE_STYLE_USAGE(.BOTH.,#271248); +#271248 = SURFACE_SIDE_STYLE('',(#271249)); +#271249 = SURFACE_STYLE_FILL_AREA(#271250); +#271250 = FILL_AREA_STYLE('',(#271251)); +#271251 = FILL_AREA_STYLE_COLOUR('',#270441); +#271252 = CURVE_STYLE('',#271253,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271254 = STYLED_ITEM('color',(#271255),#19455); +#271255 = PRESENTATION_STYLE_ASSIGNMENT((#271256,#271261)); +#271256 = SURFACE_STYLE_USAGE(.BOTH.,#271257); +#271257 = SURFACE_SIDE_STYLE('',(#271258)); +#271258 = SURFACE_STYLE_FILL_AREA(#271259); +#271259 = FILL_AREA_STYLE('',(#271260)); +#271260 = FILL_AREA_STYLE_COLOUR('',#270441); +#271261 = CURVE_STYLE('',#271262,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271263 = STYLED_ITEM('color',(#271264),#19472); +#271264 = PRESENTATION_STYLE_ASSIGNMENT((#271265,#271270)); +#271265 = SURFACE_STYLE_USAGE(.BOTH.,#271266); +#271266 = SURFACE_SIDE_STYLE('',(#271267)); +#271267 = SURFACE_STYLE_FILL_AREA(#271268); +#271268 = FILL_AREA_STYLE('',(#271269)); +#271269 = FILL_AREA_STYLE_COLOUR('',#270441); +#271270 = CURVE_STYLE('',#271271,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271272 = STYLED_ITEM('color',(#271273),#19489); +#271273 = PRESENTATION_STYLE_ASSIGNMENT((#271274,#271279)); +#271274 = SURFACE_STYLE_USAGE(.BOTH.,#271275); +#271275 = SURFACE_SIDE_STYLE('',(#271276)); +#271276 = SURFACE_STYLE_FILL_AREA(#271277); +#271277 = FILL_AREA_STYLE('',(#271278)); +#271278 = FILL_AREA_STYLE_COLOUR('',#270441); +#271279 = CURVE_STYLE('',#271280,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271281 = STYLED_ITEM('color',(#271282),#19506); +#271282 = PRESENTATION_STYLE_ASSIGNMENT((#271283,#271288)); +#271283 = SURFACE_STYLE_USAGE(.BOTH.,#271284); +#271284 = SURFACE_SIDE_STYLE('',(#271285)); +#271285 = SURFACE_STYLE_FILL_AREA(#271286); +#271286 = FILL_AREA_STYLE('',(#271287)); +#271287 = FILL_AREA_STYLE_COLOUR('',#270441); +#271288 = CURVE_STYLE('',#271289,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271290 = STYLED_ITEM('color',(#271291),#19518); +#271291 = PRESENTATION_STYLE_ASSIGNMENT((#271292,#271297)); +#271292 = SURFACE_STYLE_USAGE(.BOTH.,#271293); +#271293 = SURFACE_SIDE_STYLE('',(#271294)); +#271294 = SURFACE_STYLE_FILL_AREA(#271295); +#271295 = FILL_AREA_STYLE('',(#271296)); +#271296 = FILL_AREA_STYLE_COLOUR('',#270441); +#271297 = CURVE_STYLE('',#271298,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271299 = STYLED_ITEM('color',(#271300),#19535); +#271300 = PRESENTATION_STYLE_ASSIGNMENT((#271301,#271306)); +#271301 = SURFACE_STYLE_USAGE(.BOTH.,#271302); +#271302 = SURFACE_SIDE_STYLE('',(#271303)); +#271303 = SURFACE_STYLE_FILL_AREA(#271304); +#271304 = FILL_AREA_STYLE('',(#271305)); +#271305 = FILL_AREA_STYLE_COLOUR('',#270441); +#271306 = CURVE_STYLE('',#271307,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271308 = STYLED_ITEM('color',(#271309),#19552); +#271309 = PRESENTATION_STYLE_ASSIGNMENT((#271310,#271315)); +#271310 = SURFACE_STYLE_USAGE(.BOTH.,#271311); +#271311 = SURFACE_SIDE_STYLE('',(#271312)); +#271312 = SURFACE_STYLE_FILL_AREA(#271313); +#271313 = FILL_AREA_STYLE('',(#271314)); +#271314 = FILL_AREA_STYLE_COLOUR('',#270441); +#271315 = CURVE_STYLE('',#271316,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271317 = STYLED_ITEM('color',(#271318),#19569); +#271318 = PRESENTATION_STYLE_ASSIGNMENT((#271319,#271324)); +#271319 = SURFACE_STYLE_USAGE(.BOTH.,#271320); +#271320 = SURFACE_SIDE_STYLE('',(#271321)); +#271321 = SURFACE_STYLE_FILL_AREA(#271322); +#271322 = FILL_AREA_STYLE('',(#271323)); +#271323 = FILL_AREA_STYLE_COLOUR('',#270441); +#271324 = CURVE_STYLE('',#271325,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271326 = STYLED_ITEM('color',(#271327),#19586); +#271327 = PRESENTATION_STYLE_ASSIGNMENT((#271328,#271333)); +#271328 = SURFACE_STYLE_USAGE(.BOTH.,#271329); +#271329 = SURFACE_SIDE_STYLE('',(#271330)); +#271330 = SURFACE_STYLE_FILL_AREA(#271331); +#271331 = FILL_AREA_STYLE('',(#271332)); +#271332 = FILL_AREA_STYLE_COLOUR('',#270441); +#271333 = CURVE_STYLE('',#271334,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271335 = STYLED_ITEM('color',(#271336),#19603); +#271336 = PRESENTATION_STYLE_ASSIGNMENT((#271337,#271342)); +#271337 = SURFACE_STYLE_USAGE(.BOTH.,#271338); +#271338 = SURFACE_SIDE_STYLE('',(#271339)); +#271339 = SURFACE_STYLE_FILL_AREA(#271340); +#271340 = FILL_AREA_STYLE('',(#271341)); +#271341 = FILL_AREA_STYLE_COLOUR('',#270441); +#271342 = CURVE_STYLE('',#271343,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271344 = STYLED_ITEM('color',(#271345),#19620); +#271345 = PRESENTATION_STYLE_ASSIGNMENT((#271346,#271351)); +#271346 = SURFACE_STYLE_USAGE(.BOTH.,#271347); +#271347 = SURFACE_SIDE_STYLE('',(#271348)); +#271348 = SURFACE_STYLE_FILL_AREA(#271349); +#271349 = FILL_AREA_STYLE('',(#271350)); +#271350 = FILL_AREA_STYLE_COLOUR('',#270441); +#271351 = CURVE_STYLE('',#271352,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271353 = STYLED_ITEM('color',(#271354),#19637); +#271354 = PRESENTATION_STYLE_ASSIGNMENT((#271355,#271360)); +#271355 = SURFACE_STYLE_USAGE(.BOTH.,#271356); +#271356 = SURFACE_SIDE_STYLE('',(#271357)); +#271357 = SURFACE_STYLE_FILL_AREA(#271358); +#271358 = FILL_AREA_STYLE('',(#271359)); +#271359 = FILL_AREA_STYLE_COLOUR('',#270441); +#271360 = CURVE_STYLE('',#271361,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271362 = STYLED_ITEM('color',(#271363),#19649); +#271363 = PRESENTATION_STYLE_ASSIGNMENT((#271364,#271369)); +#271364 = SURFACE_STYLE_USAGE(.BOTH.,#271365); +#271365 = SURFACE_SIDE_STYLE('',(#271366)); +#271366 = SURFACE_STYLE_FILL_AREA(#271367); +#271367 = FILL_AREA_STYLE('',(#271368)); +#271368 = FILL_AREA_STYLE_COLOUR('',#270441); +#271369 = CURVE_STYLE('',#271370,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271371 = STYLED_ITEM('color',(#271372),#19666); +#271372 = PRESENTATION_STYLE_ASSIGNMENT((#271373,#271378)); +#271373 = SURFACE_STYLE_USAGE(.BOTH.,#271374); +#271374 = SURFACE_SIDE_STYLE('',(#271375)); +#271375 = SURFACE_STYLE_FILL_AREA(#271376); +#271376 = FILL_AREA_STYLE('',(#271377)); +#271377 = FILL_AREA_STYLE_COLOUR('',#270441); +#271378 = CURVE_STYLE('',#271379,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271380 = STYLED_ITEM('color',(#271381),#19683); +#271381 = PRESENTATION_STYLE_ASSIGNMENT((#271382,#271387)); +#271382 = SURFACE_STYLE_USAGE(.BOTH.,#271383); +#271383 = SURFACE_SIDE_STYLE('',(#271384)); +#271384 = SURFACE_STYLE_FILL_AREA(#271385); +#271385 = FILL_AREA_STYLE('',(#271386)); +#271386 = FILL_AREA_STYLE_COLOUR('',#270441); +#271387 = CURVE_STYLE('',#271388,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271389 = STYLED_ITEM('color',(#271390),#19700); +#271390 = PRESENTATION_STYLE_ASSIGNMENT((#271391,#271396)); +#271391 = SURFACE_STYLE_USAGE(.BOTH.,#271392); +#271392 = SURFACE_SIDE_STYLE('',(#271393)); +#271393 = SURFACE_STYLE_FILL_AREA(#271394); +#271394 = FILL_AREA_STYLE('',(#271395)); +#271395 = FILL_AREA_STYLE_COLOUR('',#270441); +#271396 = CURVE_STYLE('',#271397,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271398 = STYLED_ITEM('color',(#271399),#19717); +#271399 = PRESENTATION_STYLE_ASSIGNMENT((#271400,#271405)); +#271400 = SURFACE_STYLE_USAGE(.BOTH.,#271401); +#271401 = SURFACE_SIDE_STYLE('',(#271402)); +#271402 = SURFACE_STYLE_FILL_AREA(#271403); +#271403 = FILL_AREA_STYLE('',(#271404)); +#271404 = FILL_AREA_STYLE_COLOUR('',#270441); +#271405 = CURVE_STYLE('',#271406,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271407 = STYLED_ITEM('color',(#271408),#19734); +#271408 = PRESENTATION_STYLE_ASSIGNMENT((#271409,#271414)); +#271409 = SURFACE_STYLE_USAGE(.BOTH.,#271410); +#271410 = SURFACE_SIDE_STYLE('',(#271411)); +#271411 = SURFACE_STYLE_FILL_AREA(#271412); +#271412 = FILL_AREA_STYLE('',(#271413)); +#271413 = FILL_AREA_STYLE_COLOUR('',#270441); +#271414 = CURVE_STYLE('',#271415,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271416 = STYLED_ITEM('color',(#271417),#19751); +#271417 = PRESENTATION_STYLE_ASSIGNMENT((#271418,#271423)); +#271418 = SURFACE_STYLE_USAGE(.BOTH.,#271419); +#271419 = SURFACE_SIDE_STYLE('',(#271420)); +#271420 = SURFACE_STYLE_FILL_AREA(#271421); +#271421 = FILL_AREA_STYLE('',(#271422)); +#271422 = FILL_AREA_STYLE_COLOUR('',#270441); +#271423 = CURVE_STYLE('',#271424,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271425 = STYLED_ITEM('color',(#271426),#19763); +#271426 = PRESENTATION_STYLE_ASSIGNMENT((#271427,#271432)); +#271427 = SURFACE_STYLE_USAGE(.BOTH.,#271428); +#271428 = SURFACE_SIDE_STYLE('',(#271429)); +#271429 = SURFACE_STYLE_FILL_AREA(#271430); +#271430 = FILL_AREA_STYLE('',(#271431)); +#271431 = FILL_AREA_STYLE_COLOUR('',#270441); +#271432 = CURVE_STYLE('',#271433,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271434 = STYLED_ITEM('color',(#271435),#19780); +#271435 = PRESENTATION_STYLE_ASSIGNMENT((#271436,#271441)); +#271436 = SURFACE_STYLE_USAGE(.BOTH.,#271437); +#271437 = SURFACE_SIDE_STYLE('',(#271438)); +#271438 = SURFACE_STYLE_FILL_AREA(#271439); +#271439 = FILL_AREA_STYLE('',(#271440)); +#271440 = FILL_AREA_STYLE_COLOUR('',#270441); +#271441 = CURVE_STYLE('',#271442,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271443 = STYLED_ITEM('color',(#271444),#19797); +#271444 = PRESENTATION_STYLE_ASSIGNMENT((#271445,#271450)); +#271445 = SURFACE_STYLE_USAGE(.BOTH.,#271446); +#271446 = SURFACE_SIDE_STYLE('',(#271447)); +#271447 = SURFACE_STYLE_FILL_AREA(#271448); +#271448 = FILL_AREA_STYLE('',(#271449)); +#271449 = FILL_AREA_STYLE_COLOUR('',#270441); +#271450 = CURVE_STYLE('',#271451,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271452 = STYLED_ITEM('color',(#271453),#19814); +#271453 = PRESENTATION_STYLE_ASSIGNMENT((#271454,#271459)); +#271454 = SURFACE_STYLE_USAGE(.BOTH.,#271455); +#271455 = SURFACE_SIDE_STYLE('',(#271456)); +#271456 = SURFACE_STYLE_FILL_AREA(#271457); +#271457 = FILL_AREA_STYLE('',(#271458)); +#271458 = FILL_AREA_STYLE_COLOUR('',#270441); +#271459 = CURVE_STYLE('',#271460,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271461 = STYLED_ITEM('color',(#271462),#19831); +#271462 = PRESENTATION_STYLE_ASSIGNMENT((#271463,#271468)); +#271463 = SURFACE_STYLE_USAGE(.BOTH.,#271464); +#271464 = SURFACE_SIDE_STYLE('',(#271465)); +#271465 = SURFACE_STYLE_FILL_AREA(#271466); +#271466 = FILL_AREA_STYLE('',(#271467)); +#271467 = FILL_AREA_STYLE_COLOUR('',#270441); +#271468 = CURVE_STYLE('',#271469,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271470 = STYLED_ITEM('color',(#271471),#19848); +#271471 = PRESENTATION_STYLE_ASSIGNMENT((#271472,#271477)); +#271472 = SURFACE_STYLE_USAGE(.BOTH.,#271473); +#271473 = SURFACE_SIDE_STYLE('',(#271474)); +#271474 = SURFACE_STYLE_FILL_AREA(#271475); +#271475 = FILL_AREA_STYLE('',(#271476)); +#271476 = FILL_AREA_STYLE_COLOUR('',#270441); +#271477 = CURVE_STYLE('',#271478,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271479 = STYLED_ITEM('color',(#271480),#19865); +#271480 = PRESENTATION_STYLE_ASSIGNMENT((#271481,#271486)); +#271481 = SURFACE_STYLE_USAGE(.BOTH.,#271482); +#271482 = SURFACE_SIDE_STYLE('',(#271483)); +#271483 = SURFACE_STYLE_FILL_AREA(#271484); +#271484 = FILL_AREA_STYLE('',(#271485)); +#271485 = FILL_AREA_STYLE_COLOUR('',#270441); +#271486 = CURVE_STYLE('',#271487,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271488 = STYLED_ITEM('color',(#271489),#19877); +#271489 = PRESENTATION_STYLE_ASSIGNMENT((#271490,#271495)); +#271490 = SURFACE_STYLE_USAGE(.BOTH.,#271491); +#271491 = SURFACE_SIDE_STYLE('',(#271492)); +#271492 = SURFACE_STYLE_FILL_AREA(#271493); +#271493 = FILL_AREA_STYLE('',(#271494)); +#271494 = FILL_AREA_STYLE_COLOUR('',#270441); +#271495 = CURVE_STYLE('',#271496,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271497 = STYLED_ITEM('color',(#271498),#19894); +#271498 = PRESENTATION_STYLE_ASSIGNMENT((#271499,#271504)); +#271499 = SURFACE_STYLE_USAGE(.BOTH.,#271500); +#271500 = SURFACE_SIDE_STYLE('',(#271501)); +#271501 = SURFACE_STYLE_FILL_AREA(#271502); +#271502 = FILL_AREA_STYLE('',(#271503)); +#271503 = FILL_AREA_STYLE_COLOUR('',#270441); +#271504 = CURVE_STYLE('',#271505,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271506 = STYLED_ITEM('color',(#271507),#19911); +#271507 = PRESENTATION_STYLE_ASSIGNMENT((#271508,#271513)); +#271508 = SURFACE_STYLE_USAGE(.BOTH.,#271509); +#271509 = SURFACE_SIDE_STYLE('',(#271510)); +#271510 = SURFACE_STYLE_FILL_AREA(#271511); +#271511 = FILL_AREA_STYLE('',(#271512)); +#271512 = FILL_AREA_STYLE_COLOUR('',#270441); +#271513 = CURVE_STYLE('',#271514,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271515 = STYLED_ITEM('color',(#271516),#19928); +#271516 = PRESENTATION_STYLE_ASSIGNMENT((#271517,#271522)); +#271517 = SURFACE_STYLE_USAGE(.BOTH.,#271518); +#271518 = SURFACE_SIDE_STYLE('',(#271519)); +#271519 = SURFACE_STYLE_FILL_AREA(#271520); +#271520 = FILL_AREA_STYLE('',(#271521)); +#271521 = FILL_AREA_STYLE_COLOUR('',#270441); +#271522 = CURVE_STYLE('',#271523,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271524 = STYLED_ITEM('color',(#271525),#19945); +#271525 = PRESENTATION_STYLE_ASSIGNMENT((#271526,#271531)); +#271526 = SURFACE_STYLE_USAGE(.BOTH.,#271527); +#271527 = SURFACE_SIDE_STYLE('',(#271528)); +#271528 = SURFACE_STYLE_FILL_AREA(#271529); +#271529 = FILL_AREA_STYLE('',(#271530)); +#271530 = FILL_AREA_STYLE_COLOUR('',#270441); +#271531 = CURVE_STYLE('',#271532,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271533 = STYLED_ITEM('color',(#271534),#19962); +#271534 = PRESENTATION_STYLE_ASSIGNMENT((#271535,#271540)); +#271535 = SURFACE_STYLE_USAGE(.BOTH.,#271536); +#271536 = SURFACE_SIDE_STYLE('',(#271537)); +#271537 = SURFACE_STYLE_FILL_AREA(#271538); +#271538 = FILL_AREA_STYLE('',(#271539)); +#271539 = FILL_AREA_STYLE_COLOUR('',#270441); +#271540 = CURVE_STYLE('',#271541,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271542 = STYLED_ITEM('color',(#271543),#19979); +#271543 = PRESENTATION_STYLE_ASSIGNMENT((#271544,#271549)); +#271544 = SURFACE_STYLE_USAGE(.BOTH.,#271545); +#271545 = SURFACE_SIDE_STYLE('',(#271546)); +#271546 = SURFACE_STYLE_FILL_AREA(#271547); +#271547 = FILL_AREA_STYLE('',(#271548)); +#271548 = FILL_AREA_STYLE_COLOUR('',#270441); +#271549 = CURVE_STYLE('',#271550,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271551 = STYLED_ITEM('color',(#271552),#19996); +#271552 = PRESENTATION_STYLE_ASSIGNMENT((#271553,#271558)); +#271553 = SURFACE_STYLE_USAGE(.BOTH.,#271554); +#271554 = SURFACE_SIDE_STYLE('',(#271555)); +#271555 = SURFACE_STYLE_FILL_AREA(#271556); +#271556 = FILL_AREA_STYLE('',(#271557)); +#271557 = FILL_AREA_STYLE_COLOUR('',#270441); +#271558 = CURVE_STYLE('',#271559,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271560 = STYLED_ITEM('color',(#271561),#20008); +#271561 = PRESENTATION_STYLE_ASSIGNMENT((#271562,#271567)); +#271562 = SURFACE_STYLE_USAGE(.BOTH.,#271563); +#271563 = SURFACE_SIDE_STYLE('',(#271564)); +#271564 = SURFACE_STYLE_FILL_AREA(#271565); +#271565 = FILL_AREA_STYLE('',(#271566)); +#271566 = FILL_AREA_STYLE_COLOUR('',#270441); +#271567 = CURVE_STYLE('',#271568,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271568 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271569 = STYLED_ITEM('color',(#271570),#20025); +#271570 = PRESENTATION_STYLE_ASSIGNMENT((#271571,#271576)); +#271571 = SURFACE_STYLE_USAGE(.BOTH.,#271572); +#271572 = SURFACE_SIDE_STYLE('',(#271573)); +#271573 = SURFACE_STYLE_FILL_AREA(#271574); +#271574 = FILL_AREA_STYLE('',(#271575)); +#271575 = FILL_AREA_STYLE_COLOUR('',#270441); +#271576 = CURVE_STYLE('',#271577,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271578 = STYLED_ITEM('color',(#271579),#20042); +#271579 = PRESENTATION_STYLE_ASSIGNMENT((#271580,#271585)); +#271580 = SURFACE_STYLE_USAGE(.BOTH.,#271581); +#271581 = SURFACE_SIDE_STYLE('',(#271582)); +#271582 = SURFACE_STYLE_FILL_AREA(#271583); +#271583 = FILL_AREA_STYLE('',(#271584)); +#271584 = FILL_AREA_STYLE_COLOUR('',#270441); +#271585 = CURVE_STYLE('',#271586,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271587 = STYLED_ITEM('color',(#271588),#20059); +#271588 = PRESENTATION_STYLE_ASSIGNMENT((#271589,#271594)); +#271589 = SURFACE_STYLE_USAGE(.BOTH.,#271590); +#271590 = SURFACE_SIDE_STYLE('',(#271591)); +#271591 = SURFACE_STYLE_FILL_AREA(#271592); +#271592 = FILL_AREA_STYLE('',(#271593)); +#271593 = FILL_AREA_STYLE_COLOUR('',#270441); +#271594 = CURVE_STYLE('',#271595,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271596 = STYLED_ITEM('color',(#271597),#20076); +#271597 = PRESENTATION_STYLE_ASSIGNMENT((#271598,#271603)); +#271598 = SURFACE_STYLE_USAGE(.BOTH.,#271599); +#271599 = SURFACE_SIDE_STYLE('',(#271600)); +#271600 = SURFACE_STYLE_FILL_AREA(#271601); +#271601 = FILL_AREA_STYLE('',(#271602)); +#271602 = FILL_AREA_STYLE_COLOUR('',#270441); +#271603 = CURVE_STYLE('',#271604,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271605 = STYLED_ITEM('color',(#271606),#20093); +#271606 = PRESENTATION_STYLE_ASSIGNMENT((#271607,#271612)); +#271607 = SURFACE_STYLE_USAGE(.BOTH.,#271608); +#271608 = SURFACE_SIDE_STYLE('',(#271609)); +#271609 = SURFACE_STYLE_FILL_AREA(#271610); +#271610 = FILL_AREA_STYLE('',(#271611)); +#271611 = FILL_AREA_STYLE_COLOUR('',#270441); +#271612 = CURVE_STYLE('',#271613,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271613 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271614 = STYLED_ITEM('color',(#271615),#20110); +#271615 = PRESENTATION_STYLE_ASSIGNMENT((#271616,#271621)); +#271616 = SURFACE_STYLE_USAGE(.BOTH.,#271617); +#271617 = SURFACE_SIDE_STYLE('',(#271618)); +#271618 = SURFACE_STYLE_FILL_AREA(#271619); +#271619 = FILL_AREA_STYLE('',(#271620)); +#271620 = FILL_AREA_STYLE_COLOUR('',#270441); +#271621 = CURVE_STYLE('',#271622,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271622 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271623 = STYLED_ITEM('color',(#271624),#20127); +#271624 = PRESENTATION_STYLE_ASSIGNMENT((#271625,#271630)); +#271625 = SURFACE_STYLE_USAGE(.BOTH.,#271626); +#271626 = SURFACE_SIDE_STYLE('',(#271627)); +#271627 = SURFACE_STYLE_FILL_AREA(#271628); +#271628 = FILL_AREA_STYLE('',(#271629)); +#271629 = FILL_AREA_STYLE_COLOUR('',#270441); +#271630 = CURVE_STYLE('',#271631,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271631 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271632 = STYLED_ITEM('color',(#271633),#20139); +#271633 = PRESENTATION_STYLE_ASSIGNMENT((#271634,#271639)); +#271634 = SURFACE_STYLE_USAGE(.BOTH.,#271635); +#271635 = SURFACE_SIDE_STYLE('',(#271636)); +#271636 = SURFACE_STYLE_FILL_AREA(#271637); +#271637 = FILL_AREA_STYLE('',(#271638)); +#271638 = FILL_AREA_STYLE_COLOUR('',#270441); +#271639 = CURVE_STYLE('',#271640,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271641 = STYLED_ITEM('color',(#271642),#20156); +#271642 = PRESENTATION_STYLE_ASSIGNMENT((#271643,#271648)); +#271643 = SURFACE_STYLE_USAGE(.BOTH.,#271644); +#271644 = SURFACE_SIDE_STYLE('',(#271645)); +#271645 = SURFACE_STYLE_FILL_AREA(#271646); +#271646 = FILL_AREA_STYLE('',(#271647)); +#271647 = FILL_AREA_STYLE_COLOUR('',#270441); +#271648 = CURVE_STYLE('',#271649,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271649 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271650 = STYLED_ITEM('color',(#271651),#20173); +#271651 = PRESENTATION_STYLE_ASSIGNMENT((#271652,#271657)); +#271652 = SURFACE_STYLE_USAGE(.BOTH.,#271653); +#271653 = SURFACE_SIDE_STYLE('',(#271654)); +#271654 = SURFACE_STYLE_FILL_AREA(#271655); +#271655 = FILL_AREA_STYLE('',(#271656)); +#271656 = FILL_AREA_STYLE_COLOUR('',#270441); +#271657 = CURVE_STYLE('',#271658,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271658 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271659 = STYLED_ITEM('color',(#271660),#20190); +#271660 = PRESENTATION_STYLE_ASSIGNMENT((#271661,#271666)); +#271661 = SURFACE_STYLE_USAGE(.BOTH.,#271662); +#271662 = SURFACE_SIDE_STYLE('',(#271663)); +#271663 = SURFACE_STYLE_FILL_AREA(#271664); +#271664 = FILL_AREA_STYLE('',(#271665)); +#271665 = FILL_AREA_STYLE_COLOUR('',#270441); +#271666 = CURVE_STYLE('',#271667,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271667 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271668 = STYLED_ITEM('color',(#271669),#20207); +#271669 = PRESENTATION_STYLE_ASSIGNMENT((#271670,#271675)); +#271670 = SURFACE_STYLE_USAGE(.BOTH.,#271671); +#271671 = SURFACE_SIDE_STYLE('',(#271672)); +#271672 = SURFACE_STYLE_FILL_AREA(#271673); +#271673 = FILL_AREA_STYLE('',(#271674)); +#271674 = FILL_AREA_STYLE_COLOUR('',#270441); +#271675 = CURVE_STYLE('',#271676,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271676 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271677 = STYLED_ITEM('color',(#271678),#20224); +#271678 = PRESENTATION_STYLE_ASSIGNMENT((#271679,#271684)); +#271679 = SURFACE_STYLE_USAGE(.BOTH.,#271680); +#271680 = SURFACE_SIDE_STYLE('',(#271681)); +#271681 = SURFACE_STYLE_FILL_AREA(#271682); +#271682 = FILL_AREA_STYLE('',(#271683)); +#271683 = FILL_AREA_STYLE_COLOUR('',#270441); +#271684 = CURVE_STYLE('',#271685,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271685 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271686 = STYLED_ITEM('color',(#271687),#20241); +#271687 = PRESENTATION_STYLE_ASSIGNMENT((#271688,#271693)); +#271688 = SURFACE_STYLE_USAGE(.BOTH.,#271689); +#271689 = SURFACE_SIDE_STYLE('',(#271690)); +#271690 = SURFACE_STYLE_FILL_AREA(#271691); +#271691 = FILL_AREA_STYLE('',(#271692)); +#271692 = FILL_AREA_STYLE_COLOUR('',#270441); +#271693 = CURVE_STYLE('',#271694,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271694 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271695 = STYLED_ITEM('color',(#271696),#20258); +#271696 = PRESENTATION_STYLE_ASSIGNMENT((#271697,#271702)); +#271697 = SURFACE_STYLE_USAGE(.BOTH.,#271698); +#271698 = SURFACE_SIDE_STYLE('',(#271699)); +#271699 = SURFACE_STYLE_FILL_AREA(#271700); +#271700 = FILL_AREA_STYLE('',(#271701)); +#271701 = FILL_AREA_STYLE_COLOUR('',#270441); +#271702 = CURVE_STYLE('',#271703,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#271703 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271704 = STYLED_ITEM('color',(#271705),#20270); +#271705 = PRESENTATION_STYLE_ASSIGNMENT((#271706,#271712)); +#271706 = SURFACE_STYLE_USAGE(.BOTH.,#271707); +#271707 = SURFACE_SIDE_STYLE('',(#271708)); +#271708 = SURFACE_STYLE_FILL_AREA(#271709); +#271709 = FILL_AREA_STYLE('',(#271710)); +#271710 = FILL_AREA_STYLE_COLOUR('',#271711); +#271711 = COLOUR_RGB('',0.690999977303,0.663999984767,0.597999987832); +#271712 = CURVE_STYLE('',#271713,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#271713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#271714 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #271715,#271722,#271729,#271736,#271743,#271750,#271757,#271764, + #271771,#271778,#271785,#271792,#271799,#271806,#271813,#271820, + #271827,#271834,#271841,#271848,#271855,#271862,#271869,#271876, + #271883,#271890,#271897,#271904,#271911,#271918,#271925,#271932, + #271939,#271946,#271953,#271960,#271967,#271974,#271981,#271988, + #271995,#272002,#272009,#272016,#272023,#272030,#272037,#272044, + #272051,#272058,#272065,#272072,#272079,#272086,#272093,#272100, + #272107,#272114,#272121,#272128,#272135,#272142,#272149),#88945); +#271715 = STYLED_ITEM('color',(#271716),#87147); +#271716 = PRESENTATION_STYLE_ASSIGNMENT((#271717)); +#271717 = SURFACE_STYLE_USAGE(.BOTH.,#271718); +#271718 = SURFACE_SIDE_STYLE('',(#271719)); +#271719 = SURFACE_STYLE_FILL_AREA(#271720); +#271720 = FILL_AREA_STYLE('',(#271721)); +#271721 = FILL_AREA_STYLE_COLOUR('',#270350); +#271722 = STYLED_ITEM('color',(#271723),#87211); +#271723 = PRESENTATION_STYLE_ASSIGNMENT((#271724)); +#271724 = SURFACE_STYLE_USAGE(.BOTH.,#271725); +#271725 = SURFACE_SIDE_STYLE('',(#271726)); +#271726 = SURFACE_STYLE_FILL_AREA(#271727); +#271727 = FILL_AREA_STYLE('',(#271728)); +#271728 = FILL_AREA_STYLE_COLOUR('',#270350); +#271729 = STYLED_ITEM('color',(#271730),#87251); +#271730 = PRESENTATION_STYLE_ASSIGNMENT((#271731)); +#271731 = SURFACE_STYLE_USAGE(.BOTH.,#271732); +#271732 = SURFACE_SIDE_STYLE('',(#271733)); +#271733 = SURFACE_STYLE_FILL_AREA(#271734); +#271734 = FILL_AREA_STYLE('',(#271735)); +#271735 = FILL_AREA_STYLE_COLOUR('',#270350); +#271736 = STYLED_ITEM('color',(#271737),#87276); +#271737 = PRESENTATION_STYLE_ASSIGNMENT((#271738)); +#271738 = SURFACE_STYLE_USAGE(.BOTH.,#271739); +#271739 = SURFACE_SIDE_STYLE('',(#271740)); +#271740 = SURFACE_STYLE_FILL_AREA(#271741); +#271741 = FILL_AREA_STYLE('',(#271742)); +#271742 = FILL_AREA_STYLE_COLOUR('',#270350); +#271743 = STYLED_ITEM('color',(#271744),#87300); +#271744 = PRESENTATION_STYLE_ASSIGNMENT((#271745)); +#271745 = SURFACE_STYLE_USAGE(.BOTH.,#271746); +#271746 = SURFACE_SIDE_STYLE('',(#271747)); +#271747 = SURFACE_STYLE_FILL_AREA(#271748); +#271748 = FILL_AREA_STYLE('',(#271749)); +#271749 = FILL_AREA_STYLE_COLOUR('',#270350); +#271750 = STYLED_ITEM('color',(#271751),#87399); +#271751 = PRESENTATION_STYLE_ASSIGNMENT((#271752)); +#271752 = SURFACE_STYLE_USAGE(.BOTH.,#271753); +#271753 = SURFACE_SIDE_STYLE('',(#271754)); +#271754 = SURFACE_STYLE_FILL_AREA(#271755); +#271755 = FILL_AREA_STYLE('',(#271756)); +#271756 = FILL_AREA_STYLE_COLOUR('',#270350); +#271757 = STYLED_ITEM('color',(#271758),#87432); +#271758 = PRESENTATION_STYLE_ASSIGNMENT((#271759)); +#271759 = SURFACE_STYLE_USAGE(.BOTH.,#271760); +#271760 = SURFACE_SIDE_STYLE('',(#271761)); +#271761 = SURFACE_STYLE_FILL_AREA(#271762); +#271762 = FILL_AREA_STYLE('',(#271763)); +#271763 = FILL_AREA_STYLE_COLOUR('',#270350); +#271764 = STYLED_ITEM('color',(#271765),#87770); +#271765 = PRESENTATION_STYLE_ASSIGNMENT((#271766)); +#271766 = SURFACE_STYLE_USAGE(.BOTH.,#271767); +#271767 = SURFACE_SIDE_STYLE('',(#271768)); +#271768 = SURFACE_STYLE_FILL_AREA(#271769); +#271769 = FILL_AREA_STYLE('',(#271770)); +#271770 = FILL_AREA_STYLE_COLOUR('',#270350); +#271771 = STYLED_ITEM('color',(#271772),#87861); +#271772 = PRESENTATION_STYLE_ASSIGNMENT((#271773)); +#271773 = SURFACE_STYLE_USAGE(.BOTH.,#271774); +#271774 = SURFACE_SIDE_STYLE('',(#271775)); +#271775 = SURFACE_STYLE_FILL_AREA(#271776); +#271776 = FILL_AREA_STYLE('',(#271777)); +#271777 = FILL_AREA_STYLE_COLOUR('',#270350); +#271778 = STYLED_ITEM('color',(#271779),#87910); +#271779 = PRESENTATION_STYLE_ASSIGNMENT((#271780)); +#271780 = SURFACE_STYLE_USAGE(.BOTH.,#271781); +#271781 = SURFACE_SIDE_STYLE('',(#271782)); +#271782 = SURFACE_STYLE_FILL_AREA(#271783); +#271783 = FILL_AREA_STYLE('',(#271784)); +#271784 = FILL_AREA_STYLE_COLOUR('',#270350); +#271785 = STYLED_ITEM('color',(#271786),#87935); +#271786 = PRESENTATION_STYLE_ASSIGNMENT((#271787)); +#271787 = SURFACE_STYLE_USAGE(.BOTH.,#271788); +#271788 = SURFACE_SIDE_STYLE('',(#271789)); +#271789 = SURFACE_STYLE_FILL_AREA(#271790); +#271790 = FILL_AREA_STYLE('',(#271791)); +#271791 = FILL_AREA_STYLE_COLOUR('',#270350); +#271792 = STYLED_ITEM('color',(#271793),#87953); +#271793 = PRESENTATION_STYLE_ASSIGNMENT((#271794)); +#271794 = SURFACE_STYLE_USAGE(.BOTH.,#271795); +#271795 = SURFACE_SIDE_STYLE('',(#271796)); +#271796 = SURFACE_STYLE_FILL_AREA(#271797); +#271797 = FILL_AREA_STYLE('',(#271798)); +#271798 = FILL_AREA_STYLE_COLOUR('',#270350); +#271799 = STYLED_ITEM('color',(#271800),#87970); +#271800 = PRESENTATION_STYLE_ASSIGNMENT((#271801)); +#271801 = SURFACE_STYLE_USAGE(.BOTH.,#271802); +#271802 = SURFACE_SIDE_STYLE('',(#271803)); +#271803 = SURFACE_STYLE_FILL_AREA(#271804); +#271804 = FILL_AREA_STYLE('',(#271805)); +#271805 = FILL_AREA_STYLE_COLOUR('',#270350); +#271806 = STYLED_ITEM('color',(#271807),#87987); +#271807 = PRESENTATION_STYLE_ASSIGNMENT((#271808)); +#271808 = SURFACE_STYLE_USAGE(.BOTH.,#271809); +#271809 = SURFACE_SIDE_STYLE('',(#271810)); +#271810 = SURFACE_STYLE_FILL_AREA(#271811); +#271811 = FILL_AREA_STYLE('',(#271812)); +#271812 = FILL_AREA_STYLE_COLOUR('',#270350); +#271813 = STYLED_ITEM('color',(#271814),#88004); +#271814 = PRESENTATION_STYLE_ASSIGNMENT((#271815)); +#271815 = SURFACE_STYLE_USAGE(.BOTH.,#271816); +#271816 = SURFACE_SIDE_STYLE('',(#271817)); +#271817 = SURFACE_STYLE_FILL_AREA(#271818); +#271818 = FILL_AREA_STYLE('',(#271819)); +#271819 = FILL_AREA_STYLE_COLOUR('',#270350); +#271820 = STYLED_ITEM('color',(#271821),#88021); +#271821 = PRESENTATION_STYLE_ASSIGNMENT((#271822)); +#271822 = SURFACE_STYLE_USAGE(.BOTH.,#271823); +#271823 = SURFACE_SIDE_STYLE('',(#271824)); +#271824 = SURFACE_STYLE_FILL_AREA(#271825); +#271825 = FILL_AREA_STYLE('',(#271826)); +#271826 = FILL_AREA_STYLE_COLOUR('',#270350); +#271827 = STYLED_ITEM('color',(#271828),#88038); +#271828 = PRESENTATION_STYLE_ASSIGNMENT((#271829)); +#271829 = SURFACE_STYLE_USAGE(.BOTH.,#271830); +#271830 = SURFACE_SIDE_STYLE('',(#271831)); +#271831 = SURFACE_STYLE_FILL_AREA(#271832); +#271832 = FILL_AREA_STYLE('',(#271833)); +#271833 = FILL_AREA_STYLE_COLOUR('',#270350); +#271834 = STYLED_ITEM('color',(#271835),#88062); +#271835 = PRESENTATION_STYLE_ASSIGNMENT((#271836)); +#271836 = SURFACE_STYLE_USAGE(.BOTH.,#271837); +#271837 = SURFACE_SIDE_STYLE('',(#271838)); +#271838 = SURFACE_STYLE_FILL_AREA(#271839); +#271839 = FILL_AREA_STYLE('',(#271840)); +#271840 = FILL_AREA_STYLE_COLOUR('',#270350); +#271841 = STYLED_ITEM('color',(#271842),#88072); +#271842 = PRESENTATION_STYLE_ASSIGNMENT((#271843)); +#271843 = SURFACE_STYLE_USAGE(.BOTH.,#271844); +#271844 = SURFACE_SIDE_STYLE('',(#271845)); +#271845 = SURFACE_STYLE_FILL_AREA(#271846); +#271846 = FILL_AREA_STYLE('',(#271847)); +#271847 = FILL_AREA_STYLE_COLOUR('',#270350); +#271848 = STYLED_ITEM('color',(#271849),#88096); +#271849 = PRESENTATION_STYLE_ASSIGNMENT((#271850)); +#271850 = SURFACE_STYLE_USAGE(.BOTH.,#271851); +#271851 = SURFACE_SIDE_STYLE('',(#271852)); +#271852 = SURFACE_STYLE_FILL_AREA(#271853); +#271853 = FILL_AREA_STYLE('',(#271854)); +#271854 = FILL_AREA_STYLE_COLOUR('',#270350); +#271855 = STYLED_ITEM('color',(#271856),#88106); +#271856 = PRESENTATION_STYLE_ASSIGNMENT((#271857)); +#271857 = SURFACE_STYLE_USAGE(.BOTH.,#271858); +#271858 = SURFACE_SIDE_STYLE('',(#271859)); +#271859 = SURFACE_STYLE_FILL_AREA(#271860); +#271860 = FILL_AREA_STYLE('',(#271861)); +#271861 = FILL_AREA_STYLE_COLOUR('',#270350); +#271862 = STYLED_ITEM('color',(#271863),#88130); +#271863 = PRESENTATION_STYLE_ASSIGNMENT((#271864)); +#271864 = SURFACE_STYLE_USAGE(.BOTH.,#271865); +#271865 = SURFACE_SIDE_STYLE('',(#271866)); +#271866 = SURFACE_STYLE_FILL_AREA(#271867); +#271867 = FILL_AREA_STYLE('',(#271868)); +#271868 = FILL_AREA_STYLE_COLOUR('',#270350); +#271869 = STYLED_ITEM('color',(#271870),#88140); +#271870 = PRESENTATION_STYLE_ASSIGNMENT((#271871)); +#271871 = SURFACE_STYLE_USAGE(.BOTH.,#271872); +#271872 = SURFACE_SIDE_STYLE('',(#271873)); +#271873 = SURFACE_STYLE_FILL_AREA(#271874); +#271874 = FILL_AREA_STYLE('',(#271875)); +#271875 = FILL_AREA_STYLE_COLOUR('',#270350); +#271876 = STYLED_ITEM('color',(#271877),#88164); +#271877 = PRESENTATION_STYLE_ASSIGNMENT((#271878)); +#271878 = SURFACE_STYLE_USAGE(.BOTH.,#271879); +#271879 = SURFACE_SIDE_STYLE('',(#271880)); +#271880 = SURFACE_STYLE_FILL_AREA(#271881); +#271881 = FILL_AREA_STYLE('',(#271882)); +#271882 = FILL_AREA_STYLE_COLOUR('',#270350); +#271883 = STYLED_ITEM('color',(#271884),#88174); +#271884 = PRESENTATION_STYLE_ASSIGNMENT((#271885)); +#271885 = SURFACE_STYLE_USAGE(.BOTH.,#271886); +#271886 = SURFACE_SIDE_STYLE('',(#271887)); +#271887 = SURFACE_STYLE_FILL_AREA(#271888); +#271888 = FILL_AREA_STYLE('',(#271889)); +#271889 = FILL_AREA_STYLE_COLOUR('',#270441); +#271890 = STYLED_ITEM('color',(#271891),#88205); +#271891 = PRESENTATION_STYLE_ASSIGNMENT((#271892)); +#271892 = SURFACE_STYLE_USAGE(.BOTH.,#271893); +#271893 = SURFACE_SIDE_STYLE('',(#271894)); +#271894 = SURFACE_STYLE_FILL_AREA(#271895); +#271895 = FILL_AREA_STYLE('',(#271896)); +#271896 = FILL_AREA_STYLE_COLOUR('',#270441); +#271897 = STYLED_ITEM('color',(#271898),#88229); +#271898 = PRESENTATION_STYLE_ASSIGNMENT((#271899)); +#271899 = SURFACE_STYLE_USAGE(.BOTH.,#271900); +#271900 = SURFACE_SIDE_STYLE('',(#271901)); +#271901 = SURFACE_STYLE_FILL_AREA(#271902); +#271902 = FILL_AREA_STYLE('',(#271903)); +#271903 = FILL_AREA_STYLE_COLOUR('',#270441); +#271904 = STYLED_ITEM('color',(#271905),#88253); +#271905 = PRESENTATION_STYLE_ASSIGNMENT((#271906)); +#271906 = SURFACE_STYLE_USAGE(.BOTH.,#271907); +#271907 = SURFACE_SIDE_STYLE('',(#271908)); +#271908 = SURFACE_STYLE_FILL_AREA(#271909); +#271909 = FILL_AREA_STYLE('',(#271910)); +#271910 = FILL_AREA_STYLE_COLOUR('',#270441); +#271911 = STYLED_ITEM('color',(#271912),#88270); +#271912 = PRESENTATION_STYLE_ASSIGNMENT((#271913)); +#271913 = SURFACE_STYLE_USAGE(.BOTH.,#271914); +#271914 = SURFACE_SIDE_STYLE('',(#271915)); +#271915 = SURFACE_STYLE_FILL_AREA(#271916); +#271916 = FILL_AREA_STYLE('',(#271917)); +#271917 = FILL_AREA_STYLE_COLOUR('',#270441); +#271918 = STYLED_ITEM('color',(#271919),#88301); +#271919 = PRESENTATION_STYLE_ASSIGNMENT((#271920)); +#271920 = SURFACE_STYLE_USAGE(.BOTH.,#271921); +#271921 = SURFACE_SIDE_STYLE('',(#271922)); +#271922 = SURFACE_STYLE_FILL_AREA(#271923); +#271923 = FILL_AREA_STYLE('',(#271924)); +#271924 = FILL_AREA_STYLE_COLOUR('',#270441); +#271925 = STYLED_ITEM('color',(#271926),#88325); +#271926 = PRESENTATION_STYLE_ASSIGNMENT((#271927)); +#271927 = SURFACE_STYLE_USAGE(.BOTH.,#271928); +#271928 = SURFACE_SIDE_STYLE('',(#271929)); +#271929 = SURFACE_STYLE_FILL_AREA(#271930); +#271930 = FILL_AREA_STYLE('',(#271931)); +#271931 = FILL_AREA_STYLE_COLOUR('',#270441); +#271932 = STYLED_ITEM('color',(#271933),#88349); +#271933 = PRESENTATION_STYLE_ASSIGNMENT((#271934)); +#271934 = SURFACE_STYLE_USAGE(.BOTH.,#271935); +#271935 = SURFACE_SIDE_STYLE('',(#271936)); +#271936 = SURFACE_STYLE_FILL_AREA(#271937); +#271937 = FILL_AREA_STYLE('',(#271938)); +#271938 = FILL_AREA_STYLE_COLOUR('',#270441); +#271939 = STYLED_ITEM('color',(#271940),#88366); +#271940 = PRESENTATION_STYLE_ASSIGNMENT((#271941)); +#271941 = SURFACE_STYLE_USAGE(.BOTH.,#271942); +#271942 = SURFACE_SIDE_STYLE('',(#271943)); +#271943 = SURFACE_STYLE_FILL_AREA(#271944); +#271944 = FILL_AREA_STYLE('',(#271945)); +#271945 = FILL_AREA_STYLE_COLOUR('',#270441); +#271946 = STYLED_ITEM('color',(#271947),#88397); +#271947 = PRESENTATION_STYLE_ASSIGNMENT((#271948)); +#271948 = SURFACE_STYLE_USAGE(.BOTH.,#271949); +#271949 = SURFACE_SIDE_STYLE('',(#271950)); +#271950 = SURFACE_STYLE_FILL_AREA(#271951); +#271951 = FILL_AREA_STYLE('',(#271952)); +#271952 = FILL_AREA_STYLE_COLOUR('',#270441); +#271953 = STYLED_ITEM('color',(#271954),#88421); +#271954 = PRESENTATION_STYLE_ASSIGNMENT((#271955)); +#271955 = SURFACE_STYLE_USAGE(.BOTH.,#271956); +#271956 = SURFACE_SIDE_STYLE('',(#271957)); +#271957 = SURFACE_STYLE_FILL_AREA(#271958); +#271958 = FILL_AREA_STYLE('',(#271959)); +#271959 = FILL_AREA_STYLE_COLOUR('',#270441); +#271960 = STYLED_ITEM('color',(#271961),#88445); +#271961 = PRESENTATION_STYLE_ASSIGNMENT((#271962)); +#271962 = SURFACE_STYLE_USAGE(.BOTH.,#271963); +#271963 = SURFACE_SIDE_STYLE('',(#271964)); +#271964 = SURFACE_STYLE_FILL_AREA(#271965); +#271965 = FILL_AREA_STYLE('',(#271966)); +#271966 = FILL_AREA_STYLE_COLOUR('',#270441); +#271967 = STYLED_ITEM('color',(#271968),#88462); +#271968 = PRESENTATION_STYLE_ASSIGNMENT((#271969)); +#271969 = SURFACE_STYLE_USAGE(.BOTH.,#271970); +#271970 = SURFACE_SIDE_STYLE('',(#271971)); +#271971 = SURFACE_STYLE_FILL_AREA(#271972); +#271972 = FILL_AREA_STYLE('',(#271973)); +#271973 = FILL_AREA_STYLE_COLOUR('',#270441); +#271974 = STYLED_ITEM('color',(#271975),#88493); +#271975 = PRESENTATION_STYLE_ASSIGNMENT((#271976)); +#271976 = SURFACE_STYLE_USAGE(.BOTH.,#271977); +#271977 = SURFACE_SIDE_STYLE('',(#271978)); +#271978 = SURFACE_STYLE_FILL_AREA(#271979); +#271979 = FILL_AREA_STYLE('',(#271980)); +#271980 = FILL_AREA_STYLE_COLOUR('',#270441); +#271981 = STYLED_ITEM('color',(#271982),#88517); +#271982 = PRESENTATION_STYLE_ASSIGNMENT((#271983)); +#271983 = SURFACE_STYLE_USAGE(.BOTH.,#271984); +#271984 = SURFACE_SIDE_STYLE('',(#271985)); +#271985 = SURFACE_STYLE_FILL_AREA(#271986); +#271986 = FILL_AREA_STYLE('',(#271987)); +#271987 = FILL_AREA_STYLE_COLOUR('',#270441); +#271988 = STYLED_ITEM('color',(#271989),#88541); +#271989 = PRESENTATION_STYLE_ASSIGNMENT((#271990)); +#271990 = SURFACE_STYLE_USAGE(.BOTH.,#271991); +#271991 = SURFACE_SIDE_STYLE('',(#271992)); +#271992 = SURFACE_STYLE_FILL_AREA(#271993); +#271993 = FILL_AREA_STYLE('',(#271994)); +#271994 = FILL_AREA_STYLE_COLOUR('',#270441); +#271995 = STYLED_ITEM('color',(#271996),#88558); +#271996 = PRESENTATION_STYLE_ASSIGNMENT((#271997)); +#271997 = SURFACE_STYLE_USAGE(.BOTH.,#271998); +#271998 = SURFACE_SIDE_STYLE('',(#271999)); +#271999 = SURFACE_STYLE_FILL_AREA(#272000); +#272000 = FILL_AREA_STYLE('',(#272001)); +#272001 = FILL_AREA_STYLE_COLOUR('',#270441); +#272002 = STYLED_ITEM('color',(#272003),#88589); +#272003 = PRESENTATION_STYLE_ASSIGNMENT((#272004)); +#272004 = SURFACE_STYLE_USAGE(.BOTH.,#272005); +#272005 = SURFACE_SIDE_STYLE('',(#272006)); +#272006 = SURFACE_STYLE_FILL_AREA(#272007); +#272007 = FILL_AREA_STYLE('',(#272008)); +#272008 = FILL_AREA_STYLE_COLOUR('',#270441); +#272009 = STYLED_ITEM('color',(#272010),#88613); +#272010 = PRESENTATION_STYLE_ASSIGNMENT((#272011)); +#272011 = SURFACE_STYLE_USAGE(.BOTH.,#272012); +#272012 = SURFACE_SIDE_STYLE('',(#272013)); +#272013 = SURFACE_STYLE_FILL_AREA(#272014); +#272014 = FILL_AREA_STYLE('',(#272015)); +#272015 = FILL_AREA_STYLE_COLOUR('',#270441); +#272016 = STYLED_ITEM('color',(#272017),#88637); +#272017 = PRESENTATION_STYLE_ASSIGNMENT((#272018)); +#272018 = SURFACE_STYLE_USAGE(.BOTH.,#272019); +#272019 = SURFACE_SIDE_STYLE('',(#272020)); +#272020 = SURFACE_STYLE_FILL_AREA(#272021); +#272021 = FILL_AREA_STYLE('',(#272022)); +#272022 = FILL_AREA_STYLE_COLOUR('',#270441); +#272023 = STYLED_ITEM('color',(#272024),#88654); +#272024 = PRESENTATION_STYLE_ASSIGNMENT((#272025)); +#272025 = SURFACE_STYLE_USAGE(.BOTH.,#272026); +#272026 = SURFACE_SIDE_STYLE('',(#272027)); +#272027 = SURFACE_STYLE_FILL_AREA(#272028); +#272028 = FILL_AREA_STYLE('',(#272029)); +#272029 = FILL_AREA_STYLE_COLOUR('',#270441); +#272030 = STYLED_ITEM('color',(#272031),#88685); +#272031 = PRESENTATION_STYLE_ASSIGNMENT((#272032)); +#272032 = SURFACE_STYLE_USAGE(.BOTH.,#272033); +#272033 = SURFACE_SIDE_STYLE('',(#272034)); +#272034 = SURFACE_STYLE_FILL_AREA(#272035); +#272035 = FILL_AREA_STYLE('',(#272036)); +#272036 = FILL_AREA_STYLE_COLOUR('',#270441); +#272037 = STYLED_ITEM('color',(#272038),#88709); +#272038 = PRESENTATION_STYLE_ASSIGNMENT((#272039)); +#272039 = SURFACE_STYLE_USAGE(.BOTH.,#272040); +#272040 = SURFACE_SIDE_STYLE('',(#272041)); +#272041 = SURFACE_STYLE_FILL_AREA(#272042); +#272042 = FILL_AREA_STYLE('',(#272043)); +#272043 = FILL_AREA_STYLE_COLOUR('',#270441); +#272044 = STYLED_ITEM('color',(#272045),#88733); +#272045 = PRESENTATION_STYLE_ASSIGNMENT((#272046)); +#272046 = SURFACE_STYLE_USAGE(.BOTH.,#272047); +#272047 = SURFACE_SIDE_STYLE('',(#272048)); +#272048 = SURFACE_STYLE_FILL_AREA(#272049); +#272049 = FILL_AREA_STYLE('',(#272050)); +#272050 = FILL_AREA_STYLE_COLOUR('',#270441); +#272051 = STYLED_ITEM('color',(#272052),#88750); +#272052 = PRESENTATION_STYLE_ASSIGNMENT((#272053)); +#272053 = SURFACE_STYLE_USAGE(.BOTH.,#272054); +#272054 = SURFACE_SIDE_STYLE('',(#272055)); +#272055 = SURFACE_STYLE_FILL_AREA(#272056); +#272056 = FILL_AREA_STYLE('',(#272057)); +#272057 = FILL_AREA_STYLE_COLOUR('',#270350); +#272058 = STYLED_ITEM('color',(#272059),#88774); +#272059 = PRESENTATION_STYLE_ASSIGNMENT((#272060)); +#272060 = SURFACE_STYLE_USAGE(.BOTH.,#272061); +#272061 = SURFACE_SIDE_STYLE('',(#272062)); +#272062 = SURFACE_STYLE_FILL_AREA(#272063); +#272063 = FILL_AREA_STYLE('',(#272064)); +#272064 = FILL_AREA_STYLE_COLOUR('',#270350); +#272065 = STYLED_ITEM('color',(#272066),#88791); +#272066 = PRESENTATION_STYLE_ASSIGNMENT((#272067)); +#272067 = SURFACE_STYLE_USAGE(.BOTH.,#272068); +#272068 = SURFACE_SIDE_STYLE('',(#272069)); +#272069 = SURFACE_STYLE_FILL_AREA(#272070); +#272070 = FILL_AREA_STYLE('',(#272071)); +#272071 = FILL_AREA_STYLE_COLOUR('',#270350); +#272072 = STYLED_ITEM('color',(#272073),#88808); +#272073 = PRESENTATION_STYLE_ASSIGNMENT((#272074)); +#272074 = SURFACE_STYLE_USAGE(.BOTH.,#272075); +#272075 = SURFACE_SIDE_STYLE('',(#272076)); +#272076 = SURFACE_STYLE_FILL_AREA(#272077); +#272077 = FILL_AREA_STYLE('',(#272078)); +#272078 = FILL_AREA_STYLE_COLOUR('',#270350); +#272079 = STYLED_ITEM('color',(#272080),#88821); +#272080 = PRESENTATION_STYLE_ASSIGNMENT((#272081)); +#272081 = SURFACE_STYLE_USAGE(.BOTH.,#272082); +#272082 = SURFACE_SIDE_STYLE('',(#272083)); +#272083 = SURFACE_STYLE_FILL_AREA(#272084); +#272084 = FILL_AREA_STYLE('',(#272085)); +#272085 = FILL_AREA_STYLE_COLOUR('',#270350); +#272086 = STYLED_ITEM('color',(#272087),#88833); +#272087 = PRESENTATION_STYLE_ASSIGNMENT((#272088)); +#272088 = SURFACE_STYLE_USAGE(.BOTH.,#272089); +#272089 = SURFACE_SIDE_STYLE('',(#272090)); +#272090 = SURFACE_STYLE_FILL_AREA(#272091); +#272091 = FILL_AREA_STYLE('',(#272092)); +#272092 = FILL_AREA_STYLE_COLOUR('',#270350); +#272093 = STYLED_ITEM('color',(#272094),#88843); +#272094 = PRESENTATION_STYLE_ASSIGNMENT((#272095)); +#272095 = SURFACE_STYLE_USAGE(.BOTH.,#272096); +#272096 = SURFACE_SIDE_STYLE('',(#272097)); +#272097 = SURFACE_STYLE_FILL_AREA(#272098); +#272098 = FILL_AREA_STYLE('',(#272099)); +#272099 = FILL_AREA_STYLE_COLOUR('',#270350); +#272100 = STYLED_ITEM('color',(#272101),#88853); +#272101 = PRESENTATION_STYLE_ASSIGNMENT((#272102)); +#272102 = SURFACE_STYLE_USAGE(.BOTH.,#272103); +#272103 = SURFACE_SIDE_STYLE('',(#272104)); +#272104 = SURFACE_STYLE_FILL_AREA(#272105); +#272105 = FILL_AREA_STYLE('',(#272106)); +#272106 = FILL_AREA_STYLE_COLOUR('',#270350); +#272107 = STYLED_ITEM('color',(#272108),#88863); +#272108 = PRESENTATION_STYLE_ASSIGNMENT((#272109)); +#272109 = SURFACE_STYLE_USAGE(.BOTH.,#272110); +#272110 = SURFACE_SIDE_STYLE('',(#272111)); +#272111 = SURFACE_STYLE_FILL_AREA(#272112); +#272112 = FILL_AREA_STYLE('',(#272113)); +#272113 = FILL_AREA_STYLE_COLOUR('',#270350); +#272114 = STYLED_ITEM('color',(#272115),#88873); +#272115 = PRESENTATION_STYLE_ASSIGNMENT((#272116)); +#272116 = SURFACE_STYLE_USAGE(.BOTH.,#272117); +#272117 = SURFACE_SIDE_STYLE('',(#272118)); +#272118 = SURFACE_STYLE_FILL_AREA(#272119); +#272119 = FILL_AREA_STYLE('',(#272120)); +#272120 = FILL_AREA_STYLE_COLOUR('',#270441); +#272121 = STYLED_ITEM('color',(#272122),#88885); +#272122 = PRESENTATION_STYLE_ASSIGNMENT((#272123)); +#272123 = SURFACE_STYLE_USAGE(.BOTH.,#272124); +#272124 = SURFACE_SIDE_STYLE('',(#272125)); +#272125 = SURFACE_STYLE_FILL_AREA(#272126); +#272126 = FILL_AREA_STYLE('',(#272127)); +#272127 = FILL_AREA_STYLE_COLOUR('',#270441); +#272128 = STYLED_ITEM('color',(#272129),#88897); +#272129 = PRESENTATION_STYLE_ASSIGNMENT((#272130)); +#272130 = SURFACE_STYLE_USAGE(.BOTH.,#272131); +#272131 = SURFACE_SIDE_STYLE('',(#272132)); +#272132 = SURFACE_STYLE_FILL_AREA(#272133); +#272133 = FILL_AREA_STYLE('',(#272134)); +#272134 = FILL_AREA_STYLE_COLOUR('',#270441); +#272135 = STYLED_ITEM('color',(#272136),#88909); +#272136 = PRESENTATION_STYLE_ASSIGNMENT((#272137)); +#272137 = SURFACE_STYLE_USAGE(.BOTH.,#272138); +#272138 = SURFACE_SIDE_STYLE('',(#272139)); +#272139 = SURFACE_STYLE_FILL_AREA(#272140); +#272140 = FILL_AREA_STYLE('',(#272141)); +#272141 = FILL_AREA_STYLE_COLOUR('',#270441); +#272142 = STYLED_ITEM('color',(#272143),#88921); +#272143 = PRESENTATION_STYLE_ASSIGNMENT((#272144)); +#272144 = SURFACE_STYLE_USAGE(.BOTH.,#272145); +#272145 = SURFACE_SIDE_STYLE('',(#272146)); +#272146 = SURFACE_STYLE_FILL_AREA(#272147); +#272147 = FILL_AREA_STYLE('',(#272148)); +#272148 = FILL_AREA_STYLE_COLOUR('',#270441); +#272149 = STYLED_ITEM('color',(#272150),#88933); +#272150 = PRESENTATION_STYLE_ASSIGNMENT((#272151)); +#272151 = SURFACE_STYLE_USAGE(.BOTH.,#272152); +#272152 = SURFACE_SIDE_STYLE('',(#272153)); +#272153 = SURFACE_STYLE_FILL_AREA(#272154); +#272154 = FILL_AREA_STYLE('',(#272155)); +#272155 = FILL_AREA_STYLE_COLOUR('',#270441); +#272156 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #272157,#272164,#272171,#272178,#272185,#272192,#272199,#272206, + #272213,#272220,#272227,#272234,#272241,#272248,#272255,#272262, + #272269,#272276,#272283,#272290,#272297,#272304,#272311,#272318, + #272325,#272332,#272339,#272346,#272353,#272360,#272367,#272374, + #272381,#272388,#272395,#272402,#272409,#272416,#272423,#272430, + #272437),#6160); +#272157 = STYLED_ITEM('color',(#272158),#4954); +#272158 = PRESENTATION_STYLE_ASSIGNMENT((#272159)); +#272159 = SURFACE_STYLE_USAGE(.BOTH.,#272160); +#272160 = SURFACE_SIDE_STYLE('',(#272161)); +#272161 = SURFACE_STYLE_FILL_AREA(#272162); +#272162 = FILL_AREA_STYLE('',(#272163)); +#272163 = FILL_AREA_STYLE_COLOUR('',#270441); +#272164 = STYLED_ITEM('color',(#272165),#4994); +#272165 = PRESENTATION_STYLE_ASSIGNMENT((#272166)); +#272166 = SURFACE_STYLE_USAGE(.BOTH.,#272167); +#272167 = SURFACE_SIDE_STYLE('',(#272168)); +#272168 = SURFACE_STYLE_FILL_AREA(#272169); +#272169 = FILL_AREA_STYLE('',(#272170)); +#272170 = FILL_AREA_STYLE_COLOUR('',#270441); +#272171 = STYLED_ITEM('color',(#272172),#5077); +#272172 = PRESENTATION_STYLE_ASSIGNMENT((#272173)); +#272173 = SURFACE_STYLE_USAGE(.BOTH.,#272174); +#272174 = SURFACE_SIDE_STYLE('',(#272175)); +#272175 = SURFACE_STYLE_FILL_AREA(#272176); +#272176 = FILL_AREA_STYLE('',(#272177)); +#272177 = FILL_AREA_STYLE_COLOUR('',#270441); +#272178 = STYLED_ITEM('color',(#272179),#5102); +#272179 = PRESENTATION_STYLE_ASSIGNMENT((#272180)); +#272180 = SURFACE_STYLE_USAGE(.BOTH.,#272181); +#272181 = SURFACE_SIDE_STYLE('',(#272182)); +#272182 = SURFACE_STYLE_FILL_AREA(#272183); +#272183 = FILL_AREA_STYLE('',(#272184)); +#272184 = FILL_AREA_STYLE_COLOUR('',#270441); +#272185 = STYLED_ITEM('color',(#272186),#5177); +#272186 = PRESENTATION_STYLE_ASSIGNMENT((#272187)); +#272187 = SURFACE_STYLE_USAGE(.BOTH.,#272188); +#272188 = SURFACE_SIDE_STYLE('',(#272189)); +#272189 = SURFACE_STYLE_FILL_AREA(#272190); +#272190 = FILL_AREA_STYLE('',(#272191)); +#272191 = FILL_AREA_STYLE_COLOUR('',#270441); +#272192 = STYLED_ITEM('color',(#272193),#5194); +#272193 = PRESENTATION_STYLE_ASSIGNMENT((#272194)); +#272194 = SURFACE_STYLE_USAGE(.BOTH.,#272195); +#272195 = SURFACE_SIDE_STYLE('',(#272196)); +#272196 = SURFACE_STYLE_FILL_AREA(#272197); +#272197 = FILL_AREA_STYLE('',(#272198)); +#272198 = FILL_AREA_STYLE_COLOUR('',#270441); +#272199 = STYLED_ITEM('color',(#272200),#5211); +#272200 = PRESENTATION_STYLE_ASSIGNMENT((#272201)); +#272201 = SURFACE_STYLE_USAGE(.BOTH.,#272202); +#272202 = SURFACE_SIDE_STYLE('',(#272203)); +#272203 = SURFACE_STYLE_FILL_AREA(#272204); +#272204 = FILL_AREA_STYLE('',(#272205)); +#272205 = FILL_AREA_STYLE_COLOUR('',#270441); +#272206 = STYLED_ITEM('color',(#272207),#5228); +#272207 = PRESENTATION_STYLE_ASSIGNMENT((#272208)); +#272208 = SURFACE_STYLE_USAGE(.BOTH.,#272209); +#272209 = SURFACE_SIDE_STYLE('',(#272210)); +#272210 = SURFACE_STYLE_FILL_AREA(#272211); +#272211 = FILL_AREA_STYLE('',(#272212)); +#272212 = FILL_AREA_STYLE_COLOUR('',#270441); +#272213 = STYLED_ITEM('color',(#272214),#5245); +#272214 = PRESENTATION_STYLE_ASSIGNMENT((#272215)); +#272215 = SURFACE_STYLE_USAGE(.BOTH.,#272216); +#272216 = SURFACE_SIDE_STYLE('',(#272217)); +#272217 = SURFACE_STYLE_FILL_AREA(#272218); +#272218 = FILL_AREA_STYLE('',(#272219)); +#272219 = FILL_AREA_STYLE_COLOUR('',#270441); +#272220 = STYLED_ITEM('color',(#272221),#5262); +#272221 = PRESENTATION_STYLE_ASSIGNMENT((#272222)); +#272222 = SURFACE_STYLE_USAGE(.BOTH.,#272223); +#272223 = SURFACE_SIDE_STYLE('',(#272224)); +#272224 = SURFACE_STYLE_FILL_AREA(#272225); +#272225 = FILL_AREA_STYLE('',(#272226)); +#272226 = FILL_AREA_STYLE_COLOUR('',#270441); +#272227 = STYLED_ITEM('color',(#272228),#5278); +#272228 = PRESENTATION_STYLE_ASSIGNMENT((#272229)); +#272229 = SURFACE_STYLE_USAGE(.BOTH.,#272230); +#272230 = SURFACE_SIDE_STYLE('',(#272231)); +#272231 = SURFACE_STYLE_FILL_AREA(#272232); +#272232 = FILL_AREA_STYLE('',(#272233)); +#272233 = FILL_AREA_STYLE_COLOUR('',#270350); +#272234 = STYLED_ITEM('color',(#272235),#5325); +#272235 = PRESENTATION_STYLE_ASSIGNMENT((#272236)); +#272236 = SURFACE_STYLE_USAGE(.BOTH.,#272237); +#272237 = SURFACE_SIDE_STYLE('',(#272238)); +#272238 = SURFACE_STYLE_FILL_AREA(#272239); +#272239 = FILL_AREA_STYLE('',(#272240)); +#272240 = FILL_AREA_STYLE_COLOUR('',#270350); +#272241 = STYLED_ITEM('color',(#272242),#5360); +#272242 = PRESENTATION_STYLE_ASSIGNMENT((#272243)); +#272243 = SURFACE_STYLE_USAGE(.BOTH.,#272244); +#272244 = SURFACE_SIDE_STYLE('',(#272245)); +#272245 = SURFACE_STYLE_FILL_AREA(#272246); +#272246 = FILL_AREA_STYLE('',(#272247)); +#272247 = FILL_AREA_STYLE_COLOUR('',#270350); +#272248 = STYLED_ITEM('color',(#272249),#5399); +#272249 = PRESENTATION_STYLE_ASSIGNMENT((#272250)); +#272250 = SURFACE_STYLE_USAGE(.BOTH.,#272251); +#272251 = SURFACE_SIDE_STYLE('',(#272252)); +#272252 = SURFACE_STYLE_FILL_AREA(#272253); +#272253 = FILL_AREA_STYLE('',(#272254)); +#272254 = FILL_AREA_STYLE_COLOUR('',#270350); +#272255 = STYLED_ITEM('color',(#272256),#5428); +#272256 = PRESENTATION_STYLE_ASSIGNMENT((#272257)); +#272257 = SURFACE_STYLE_USAGE(.BOTH.,#272258); +#272258 = SURFACE_SIDE_STYLE('',(#272259)); +#272259 = SURFACE_STYLE_FILL_AREA(#272260); +#272260 = FILL_AREA_STYLE('',(#272261)); +#272261 = FILL_AREA_STYLE_COLOUR('',#270350); +#272262 = STYLED_ITEM('color',(#272263),#5467); +#272263 = PRESENTATION_STYLE_ASSIGNMENT((#272264)); +#272264 = SURFACE_STYLE_USAGE(.BOTH.,#272265); +#272265 = SURFACE_SIDE_STYLE('',(#272266)); +#272266 = SURFACE_STYLE_FILL_AREA(#272267); +#272267 = FILL_AREA_STYLE('',(#272268)); +#272268 = FILL_AREA_STYLE_COLOUR('',#270350); +#272269 = STYLED_ITEM('color',(#272270),#5496); +#272270 = PRESENTATION_STYLE_ASSIGNMENT((#272271)); +#272271 = SURFACE_STYLE_USAGE(.BOTH.,#272272); +#272272 = SURFACE_SIDE_STYLE('',(#272273)); +#272273 = SURFACE_STYLE_FILL_AREA(#272274); +#272274 = FILL_AREA_STYLE('',(#272275)); +#272275 = FILL_AREA_STYLE_COLOUR('',#270350); +#272276 = STYLED_ITEM('color',(#272277),#5550); +#272277 = PRESENTATION_STYLE_ASSIGNMENT((#272278)); +#272278 = SURFACE_STYLE_USAGE(.BOTH.,#272279); +#272279 = SURFACE_SIDE_STYLE('',(#272280)); +#272280 = SURFACE_STYLE_FILL_AREA(#272281); +#272281 = FILL_AREA_STYLE('',(#272282)); +#272282 = FILL_AREA_STYLE_COLOUR('',#270350); +#272283 = STYLED_ITEM('color',(#272284),#5593); +#272284 = PRESENTATION_STYLE_ASSIGNMENT((#272285)); +#272285 = SURFACE_STYLE_USAGE(.BOTH.,#272286); +#272286 = SURFACE_SIDE_STYLE('',(#272287)); +#272287 = SURFACE_STYLE_FILL_AREA(#272288); +#272288 = FILL_AREA_STYLE('',(#272289)); +#272289 = FILL_AREA_STYLE_COLOUR('',#270350); +#272290 = STYLED_ITEM('color',(#272291),#5616); +#272291 = PRESENTATION_STYLE_ASSIGNMENT((#272292)); +#272292 = SURFACE_STYLE_USAGE(.BOTH.,#272293); +#272293 = SURFACE_SIDE_STYLE('',(#272294)); +#272294 = SURFACE_STYLE_FILL_AREA(#272295); +#272295 = FILL_AREA_STYLE('',(#272296)); +#272296 = FILL_AREA_STYLE_COLOUR('',#270350); +#272297 = STYLED_ITEM('color',(#272298),#5639); +#272298 = PRESENTATION_STYLE_ASSIGNMENT((#272299)); +#272299 = SURFACE_STYLE_USAGE(.BOTH.,#272300); +#272300 = SURFACE_SIDE_STYLE('',(#272301)); +#272301 = SURFACE_STYLE_FILL_AREA(#272302); +#272302 = FILL_AREA_STYLE('',(#272303)); +#272303 = FILL_AREA_STYLE_COLOUR('',#270350); +#272304 = STYLED_ITEM('color',(#272305),#5662); +#272305 = PRESENTATION_STYLE_ASSIGNMENT((#272306)); +#272306 = SURFACE_STYLE_USAGE(.BOTH.,#272307); +#272307 = SURFACE_SIDE_STYLE('',(#272308)); +#272308 = SURFACE_STYLE_FILL_AREA(#272309); +#272309 = FILL_AREA_STYLE('',(#272310)); +#272310 = FILL_AREA_STYLE_COLOUR('',#270350); +#272311 = STYLED_ITEM('color',(#272312),#5713); +#272312 = PRESENTATION_STYLE_ASSIGNMENT((#272313)); +#272313 = SURFACE_STYLE_USAGE(.BOTH.,#272314); +#272314 = SURFACE_SIDE_STYLE('',(#272315)); +#272315 = SURFACE_STYLE_FILL_AREA(#272316); +#272316 = FILL_AREA_STYLE('',(#272317)); +#272317 = FILL_AREA_STYLE_COLOUR('',#270350); +#272318 = STYLED_ITEM('color',(#272319),#5736); +#272319 = PRESENTATION_STYLE_ASSIGNMENT((#272320)); +#272320 = SURFACE_STYLE_USAGE(.BOTH.,#272321); +#272321 = SURFACE_SIDE_STYLE('',(#272322)); +#272322 = SURFACE_STYLE_FILL_AREA(#272323); +#272323 = FILL_AREA_STYLE('',(#272324)); +#272324 = FILL_AREA_STYLE_COLOUR('',#270350); +#272325 = STYLED_ITEM('color',(#272326),#5753); +#272326 = PRESENTATION_STYLE_ASSIGNMENT((#272327)); +#272327 = SURFACE_STYLE_USAGE(.BOTH.,#272328); +#272328 = SURFACE_SIDE_STYLE('',(#272329)); +#272329 = SURFACE_STYLE_FILL_AREA(#272330); +#272330 = FILL_AREA_STYLE('',(#272331)); +#272331 = FILL_AREA_STYLE_COLOUR('',#270441); +#272332 = STYLED_ITEM('color',(#272333),#5827); +#272333 = PRESENTATION_STYLE_ASSIGNMENT((#272334)); +#272334 = SURFACE_STYLE_USAGE(.BOTH.,#272335); +#272335 = SURFACE_SIDE_STYLE('',(#272336)); +#272336 = SURFACE_STYLE_FILL_AREA(#272337); +#272337 = FILL_AREA_STYLE('',(#272338)); +#272338 = FILL_AREA_STYLE_COLOUR('',#270441); +#272339 = STYLED_ITEM('color',(#272340),#5851); +#272340 = PRESENTATION_STYLE_ASSIGNMENT((#272341)); +#272341 = SURFACE_STYLE_USAGE(.BOTH.,#272342); +#272342 = SURFACE_SIDE_STYLE('',(#272343)); +#272343 = SURFACE_STYLE_FILL_AREA(#272344); +#272344 = FILL_AREA_STYLE('',(#272345)); +#272345 = FILL_AREA_STYLE_COLOUR('',#270441); +#272346 = STYLED_ITEM('color',(#272347),#5918); +#272347 = PRESENTATION_STYLE_ASSIGNMENT((#272348)); +#272348 = SURFACE_STYLE_USAGE(.BOTH.,#272349); +#272349 = SURFACE_SIDE_STYLE('',(#272350)); +#272350 = SURFACE_STYLE_FILL_AREA(#272351); +#272351 = FILL_AREA_STYLE('',(#272352)); +#272352 = FILL_AREA_STYLE_COLOUR('',#270350); +#272353 = STYLED_ITEM('color',(#272354),#5930); +#272354 = PRESENTATION_STYLE_ASSIGNMENT((#272355)); +#272355 = SURFACE_STYLE_USAGE(.BOTH.,#272356); +#272356 = SURFACE_SIDE_STYLE('',(#272357)); +#272357 = SURFACE_STYLE_FILL_AREA(#272358); +#272358 = FILL_AREA_STYLE('',(#272359)); +#272359 = FILL_AREA_STYLE_COLOUR('',#270350); +#272360 = STYLED_ITEM('color',(#272361),#5942); +#272361 = PRESENTATION_STYLE_ASSIGNMENT((#272362)); +#272362 = SURFACE_STYLE_USAGE(.BOTH.,#272363); +#272363 = SURFACE_SIDE_STYLE('',(#272364)); +#272364 = SURFACE_STYLE_FILL_AREA(#272365); +#272365 = FILL_AREA_STYLE('',(#272366)); +#272366 = FILL_AREA_STYLE_COLOUR('',#270441); +#272367 = STYLED_ITEM('color',(#272368),#5959); +#272368 = PRESENTATION_STYLE_ASSIGNMENT((#272369)); +#272369 = SURFACE_STYLE_USAGE(.BOTH.,#272370); +#272370 = SURFACE_SIDE_STYLE('',(#272371)); +#272371 = SURFACE_STYLE_FILL_AREA(#272372); +#272372 = FILL_AREA_STYLE('',(#272373)); +#272373 = FILL_AREA_STYLE_COLOUR('',#271711); +#272374 = STYLED_ITEM('color',(#272375),#5988); +#272375 = PRESENTATION_STYLE_ASSIGNMENT((#272376)); +#272376 = SURFACE_STYLE_USAGE(.BOTH.,#272377); +#272377 = SURFACE_SIDE_STYLE('',(#272378)); +#272378 = SURFACE_STYLE_FILL_AREA(#272379); +#272379 = FILL_AREA_STYLE('',(#272380)); +#272380 = FILL_AREA_STYLE_COLOUR('',#271711); +#272381 = STYLED_ITEM('color',(#272382),#6011); +#272382 = PRESENTATION_STYLE_ASSIGNMENT((#272383)); +#272383 = SURFACE_STYLE_USAGE(.BOTH.,#272384); +#272384 = SURFACE_SIDE_STYLE('',(#272385)); +#272385 = SURFACE_STYLE_FILL_AREA(#272386); +#272386 = FILL_AREA_STYLE('',(#272387)); +#272387 = FILL_AREA_STYLE_COLOUR('',#271711); +#272388 = STYLED_ITEM('color',(#272389),#6034); +#272389 = PRESENTATION_STYLE_ASSIGNMENT((#272390)); +#272390 = SURFACE_STYLE_USAGE(.BOTH.,#272391); +#272391 = SURFACE_SIDE_STYLE('',(#272392)); +#272392 = SURFACE_STYLE_FILL_AREA(#272393); +#272393 = FILL_AREA_STYLE('',(#272394)); +#272394 = FILL_AREA_STYLE_COLOUR('',#271711); +#272395 = STYLED_ITEM('color',(#272396),#6051); +#272396 = PRESENTATION_STYLE_ASSIGNMENT((#272397)); +#272397 = SURFACE_STYLE_USAGE(.BOTH.,#272398); +#272398 = SURFACE_SIDE_STYLE('',(#272399)); +#272399 = SURFACE_STYLE_FILL_AREA(#272400); +#272400 = FILL_AREA_STYLE('',(#272401)); +#272401 = FILL_AREA_STYLE_COLOUR('',#270441); +#272402 = STYLED_ITEM('color',(#272403),#6073); +#272403 = PRESENTATION_STYLE_ASSIGNMENT((#272404)); +#272404 = SURFACE_STYLE_USAGE(.BOTH.,#272405); +#272405 = SURFACE_SIDE_STYLE('',(#272406)); +#272406 = SURFACE_STYLE_FILL_AREA(#272407); +#272407 = FILL_AREA_STYLE('',(#272408)); +#272408 = FILL_AREA_STYLE_COLOUR('',#270441); +#272409 = STYLED_ITEM('color',(#272410),#6085); +#272410 = PRESENTATION_STYLE_ASSIGNMENT((#272411)); +#272411 = SURFACE_STYLE_USAGE(.BOTH.,#272412); +#272412 = SURFACE_SIDE_STYLE('',(#272413)); +#272413 = SURFACE_STYLE_FILL_AREA(#272414); +#272414 = FILL_AREA_STYLE('',(#272415)); +#272415 = FILL_AREA_STYLE_COLOUR('',#270441); +#272416 = STYLED_ITEM('color',(#272417),#6102); +#272417 = PRESENTATION_STYLE_ASSIGNMENT((#272418)); +#272418 = SURFACE_STYLE_USAGE(.BOTH.,#272419); +#272419 = SURFACE_SIDE_STYLE('',(#272420)); +#272420 = SURFACE_STYLE_FILL_AREA(#272421); +#272421 = FILL_AREA_STYLE('',(#272422)); +#272422 = FILL_AREA_STYLE_COLOUR('',#270441); +#272423 = STYLED_ITEM('color',(#272424),#6119); +#272424 = PRESENTATION_STYLE_ASSIGNMENT((#272425)); +#272425 = SURFACE_STYLE_USAGE(.BOTH.,#272426); +#272426 = SURFACE_SIDE_STYLE('',(#272427)); +#272427 = SURFACE_STYLE_FILL_AREA(#272428); +#272428 = FILL_AREA_STYLE('',(#272429)); +#272429 = FILL_AREA_STYLE_COLOUR('',#270441); +#272430 = STYLED_ITEM('color',(#272431),#6136); +#272431 = PRESENTATION_STYLE_ASSIGNMENT((#272432)); +#272432 = SURFACE_STYLE_USAGE(.BOTH.,#272433); +#272433 = SURFACE_SIDE_STYLE('',(#272434)); +#272434 = SURFACE_STYLE_FILL_AREA(#272435); +#272435 = FILL_AREA_STYLE('',(#272436)); +#272436 = FILL_AREA_STYLE_COLOUR('',#270441); +#272437 = STYLED_ITEM('color',(#272438),#6148); +#272438 = PRESENTATION_STYLE_ASSIGNMENT((#272439)); +#272439 = SURFACE_STYLE_USAGE(.BOTH.,#272440); +#272440 = SURFACE_SIDE_STYLE('',(#272441)); +#272441 = SURFACE_STYLE_FILL_AREA(#272442); +#272442 = FILL_AREA_STYLE('',(#272443)); +#272443 = FILL_AREA_STYLE_COLOUR('',#271711); +#272444 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #272445,#272452,#272459,#272466,#272473,#272480,#272487,#272494, + #272501,#272508,#272515,#272522,#272529,#272536,#272543,#272550, + #272557,#272564,#272571,#272578,#272585,#272592,#272599,#272606, + #272613,#272620,#272627,#272634,#272641,#272648,#272655,#272662, + #272669,#272676,#272683,#272690,#272697,#272704,#272711,#272718, + #272725,#272732,#272739,#272746,#272753,#272760,#272767,#272774, + #272781,#272788,#272795,#272802,#272809,#272816),#58658); +#272445 = STYLED_ITEM('color',(#272446),#56031); +#272446 = PRESENTATION_STYLE_ASSIGNMENT((#272447)); +#272447 = SURFACE_STYLE_USAGE(.BOTH.,#272448); +#272448 = SURFACE_SIDE_STYLE('',(#272449)); +#272449 = SURFACE_STYLE_FILL_AREA(#272450); +#272450 = FILL_AREA_STYLE('',(#272451)); +#272451 = FILL_AREA_STYLE_COLOUR('',#270441); +#272452 = STYLED_ITEM('color',(#272453),#56071); +#272453 = PRESENTATION_STYLE_ASSIGNMENT((#272454)); +#272454 = SURFACE_STYLE_USAGE(.BOTH.,#272455); +#272455 = SURFACE_SIDE_STYLE('',(#272456)); +#272456 = SURFACE_STYLE_FILL_AREA(#272457); +#272457 = FILL_AREA_STYLE('',(#272458)); +#272458 = FILL_AREA_STYLE_COLOUR('',#270441); +#272459 = STYLED_ITEM('color',(#272460),#56102); +#272460 = PRESENTATION_STYLE_ASSIGNMENT((#272461)); +#272461 = SURFACE_STYLE_USAGE(.BOTH.,#272462); +#272462 = SURFACE_SIDE_STYLE('',(#272463)); +#272463 = SURFACE_STYLE_FILL_AREA(#272464); +#272464 = FILL_AREA_STYLE('',(#272465)); +#272465 = FILL_AREA_STYLE_COLOUR('',#270441); +#272466 = STYLED_ITEM('color',(#272467),#56232); +#272467 = PRESENTATION_STYLE_ASSIGNMENT((#272468)); +#272468 = SURFACE_STYLE_USAGE(.BOTH.,#272469); +#272469 = SURFACE_SIDE_STYLE('',(#272470)); +#272470 = SURFACE_STYLE_FILL_AREA(#272471); +#272471 = FILL_AREA_STYLE('',(#272472)); +#272472 = FILL_AREA_STYLE_COLOUR('',#270441); +#272473 = STYLED_ITEM('color',(#272474),#56256); +#272474 = PRESENTATION_STYLE_ASSIGNMENT((#272475)); +#272475 = SURFACE_STYLE_USAGE(.BOTH.,#272476); +#272476 = SURFACE_SIDE_STYLE('',(#272477)); +#272477 = SURFACE_STYLE_FILL_AREA(#272478); +#272478 = FILL_AREA_STYLE('',(#272479)); +#272479 = FILL_AREA_STYLE_COLOUR('',#270441); +#272480 = STYLED_ITEM('color',(#272481),#56379); +#272481 = PRESENTATION_STYLE_ASSIGNMENT((#272482)); +#272482 = SURFACE_STYLE_USAGE(.BOTH.,#272483); +#272483 = SURFACE_SIDE_STYLE('',(#272484)); +#272484 = SURFACE_STYLE_FILL_AREA(#272485); +#272485 = FILL_AREA_STYLE('',(#272486)); +#272486 = FILL_AREA_STYLE_COLOUR('',#270350); +#272487 = STYLED_ITEM('color',(#272488),#56506); +#272488 = PRESENTATION_STYLE_ASSIGNMENT((#272489)); +#272489 = SURFACE_STYLE_USAGE(.BOTH.,#272490); +#272490 = SURFACE_SIDE_STYLE('',(#272491)); +#272491 = SURFACE_STYLE_FILL_AREA(#272492); +#272492 = FILL_AREA_STYLE('',(#272493)); +#272493 = FILL_AREA_STYLE_COLOUR('',#270441); +#272494 = STYLED_ITEM('color',(#272495),#56523); +#272495 = PRESENTATION_STYLE_ASSIGNMENT((#272496)); +#272496 = SURFACE_STYLE_USAGE(.BOTH.,#272497); +#272497 = SURFACE_SIDE_STYLE('',(#272498)); +#272498 = SURFACE_STYLE_FILL_AREA(#272499); +#272499 = FILL_AREA_STYLE('',(#272500)); +#272500 = FILL_AREA_STYLE_COLOUR('',#270350); +#272501 = STYLED_ITEM('color',(#272502),#56546); +#272502 = PRESENTATION_STYLE_ASSIGNMENT((#272503)); +#272503 = SURFACE_STYLE_USAGE(.BOTH.,#272504); +#272504 = SURFACE_SIDE_STYLE('',(#272505)); +#272505 = SURFACE_STYLE_FILL_AREA(#272506); +#272506 = FILL_AREA_STYLE('',(#272507)); +#272507 = FILL_AREA_STYLE_COLOUR('',#270350); +#272508 = STYLED_ITEM('color',(#272509),#56668); +#272509 = PRESENTATION_STYLE_ASSIGNMENT((#272510)); +#272510 = SURFACE_STYLE_USAGE(.BOTH.,#272511); +#272511 = SURFACE_SIDE_STYLE('',(#272512)); +#272512 = SURFACE_STYLE_FILL_AREA(#272513); +#272513 = FILL_AREA_STYLE('',(#272514)); +#272514 = FILL_AREA_STYLE_COLOUR('',#270350); +#272515 = STYLED_ITEM('color',(#272516),#56796); +#272516 = PRESENTATION_STYLE_ASSIGNMENT((#272517)); +#272517 = SURFACE_STYLE_USAGE(.BOTH.,#272518); +#272518 = SURFACE_SIDE_STYLE('',(#272519)); +#272519 = SURFACE_STYLE_FILL_AREA(#272520); +#272520 = FILL_AREA_STYLE('',(#272521)); +#272521 = FILL_AREA_STYLE_COLOUR('',#270350); +#272522 = STYLED_ITEM('color',(#272523),#56813); +#272523 = PRESENTATION_STYLE_ASSIGNMENT((#272524)); +#272524 = SURFACE_STYLE_USAGE(.BOTH.,#272525); +#272525 = SURFACE_SIDE_STYLE('',(#272526)); +#272526 = SURFACE_STYLE_FILL_AREA(#272527); +#272527 = FILL_AREA_STYLE('',(#272528)); +#272528 = FILL_AREA_STYLE_COLOUR('',#270441); +#272529 = STYLED_ITEM('color',(#272530),#56844); +#272530 = PRESENTATION_STYLE_ASSIGNMENT((#272531)); +#272531 = SURFACE_STYLE_USAGE(.BOTH.,#272532); +#272532 = SURFACE_SIDE_STYLE('',(#272533)); +#272533 = SURFACE_STYLE_FILL_AREA(#272534); +#272534 = FILL_AREA_STYLE('',(#272535)); +#272535 = FILL_AREA_STYLE_COLOUR('',#270350); +#272536 = STYLED_ITEM('color',(#272537),#57071); +#272537 = PRESENTATION_STYLE_ASSIGNMENT((#272538)); +#272538 = SURFACE_STYLE_USAGE(.BOTH.,#272539); +#272539 = SURFACE_SIDE_STYLE('',(#272540)); +#272540 = SURFACE_STYLE_FILL_AREA(#272541); +#272541 = FILL_AREA_STYLE('',(#272542)); +#272542 = FILL_AREA_STYLE_COLOUR('',#270441); +#272543 = STYLED_ITEM('color',(#272544),#57102); +#272544 = PRESENTATION_STYLE_ASSIGNMENT((#272545)); +#272545 = SURFACE_STYLE_USAGE(.BOTH.,#272546); +#272546 = SURFACE_SIDE_STYLE('',(#272547)); +#272547 = SURFACE_STYLE_FILL_AREA(#272548); +#272548 = FILL_AREA_STYLE('',(#272549)); +#272549 = FILL_AREA_STYLE_COLOUR('',#270350); +#272550 = STYLED_ITEM('color',(#272551),#57329); +#272551 = PRESENTATION_STYLE_ASSIGNMENT((#272552)); +#272552 = SURFACE_STYLE_USAGE(.BOTH.,#272553); +#272553 = SURFACE_SIDE_STYLE('',(#272554)); +#272554 = SURFACE_STYLE_FILL_AREA(#272555); +#272555 = FILL_AREA_STYLE('',(#272556)); +#272556 = FILL_AREA_STYLE_COLOUR('',#270441); +#272557 = STYLED_ITEM('color',(#272558),#57360); +#272558 = PRESENTATION_STYLE_ASSIGNMENT((#272559)); +#272559 = SURFACE_STYLE_USAGE(.BOTH.,#272560); +#272560 = SURFACE_SIDE_STYLE('',(#272561)); +#272561 = SURFACE_STYLE_FILL_AREA(#272562); +#272562 = FILL_AREA_STYLE('',(#272563)); +#272563 = FILL_AREA_STYLE_COLOUR('',#270441); +#272564 = STYLED_ITEM('color',(#272565),#57391); +#272565 = PRESENTATION_STYLE_ASSIGNMENT((#272566)); +#272566 = SURFACE_STYLE_USAGE(.BOTH.,#272567); +#272567 = SURFACE_SIDE_STYLE('',(#272568)); +#272568 = SURFACE_STYLE_FILL_AREA(#272569); +#272569 = FILL_AREA_STYLE('',(#272570)); +#272570 = FILL_AREA_STYLE_COLOUR('',#270350); +#272571 = STYLED_ITEM('color',(#272572),#57618); +#272572 = PRESENTATION_STYLE_ASSIGNMENT((#272573)); +#272573 = SURFACE_STYLE_USAGE(.BOTH.,#272574); +#272574 = SURFACE_SIDE_STYLE('',(#272575)); +#272575 = SURFACE_STYLE_FILL_AREA(#272576); +#272576 = FILL_AREA_STYLE('',(#272577)); +#272577 = FILL_AREA_STYLE_COLOUR('',#270350); +#272578 = STYLED_ITEM('color',(#272579),#57746); +#272579 = PRESENTATION_STYLE_ASSIGNMENT((#272580)); +#272580 = SURFACE_STYLE_USAGE(.BOTH.,#272581); +#272581 = SURFACE_SIDE_STYLE('',(#272582)); +#272582 = SURFACE_STYLE_FILL_AREA(#272583); +#272583 = FILL_AREA_STYLE('',(#272584)); +#272584 = FILL_AREA_STYLE_COLOUR('',#270441); +#272585 = STYLED_ITEM('color',(#272586),#57777); +#272586 = PRESENTATION_STYLE_ASSIGNMENT((#272587)); +#272587 = SURFACE_STYLE_USAGE(.BOTH.,#272588); +#272588 = SURFACE_SIDE_STYLE('',(#272589)); +#272589 = SURFACE_STYLE_FILL_AREA(#272590); +#272590 = FILL_AREA_STYLE('',(#272591)); +#272591 = FILL_AREA_STYLE_COLOUR('',#270350); +#272592 = STYLED_ITEM('color',(#272593),#57800); +#272593 = PRESENTATION_STYLE_ASSIGNMENT((#272594)); +#272594 = SURFACE_STYLE_USAGE(.BOTH.,#272595); +#272595 = SURFACE_SIDE_STYLE('',(#272596)); +#272596 = SURFACE_STYLE_FILL_AREA(#272597); +#272597 = FILL_AREA_STYLE('',(#272598)); +#272598 = FILL_AREA_STYLE_COLOUR('',#270350); +#272599 = STYLED_ITEM('color',(#272600),#57922); +#272600 = PRESENTATION_STYLE_ASSIGNMENT((#272601)); +#272601 = SURFACE_STYLE_USAGE(.BOTH.,#272602); +#272602 = SURFACE_SIDE_STYLE('',(#272603)); +#272603 = SURFACE_STYLE_FILL_AREA(#272604); +#272604 = FILL_AREA_STYLE('',(#272605)); +#272605 = FILL_AREA_STYLE_COLOUR('',#270350); +#272606 = STYLED_ITEM('color',(#272607),#57967); +#272607 = PRESENTATION_STYLE_ASSIGNMENT((#272608)); +#272608 = SURFACE_STYLE_USAGE(.BOTH.,#272609); +#272609 = SURFACE_SIDE_STYLE('',(#272610)); +#272610 = SURFACE_STYLE_FILL_AREA(#272611); +#272611 = FILL_AREA_STYLE('',(#272612)); +#272612 = FILL_AREA_STYLE_COLOUR('',#270441); +#272613 = STYLED_ITEM('color',(#272614),#57999); +#272614 = PRESENTATION_STYLE_ASSIGNMENT((#272615)); +#272615 = SURFACE_STYLE_USAGE(.BOTH.,#272616); +#272616 = SURFACE_SIDE_STYLE('',(#272617)); +#272617 = SURFACE_STYLE_FILL_AREA(#272618); +#272618 = FILL_AREA_STYLE('',(#272619)); +#272619 = FILL_AREA_STYLE_COLOUR('',#270350); +#272620 = STYLED_ITEM('color',(#272621),#58049); +#272621 = PRESENTATION_STYLE_ASSIGNMENT((#272622)); +#272622 = SURFACE_STYLE_USAGE(.BOTH.,#272623); +#272623 = SURFACE_SIDE_STYLE('',(#272624)); +#272624 = SURFACE_STYLE_FILL_AREA(#272625); +#272625 = FILL_AREA_STYLE('',(#272626)); +#272626 = FILL_AREA_STYLE_COLOUR('',#270441); +#272627 = STYLED_ITEM('color',(#272628),#58081); +#272628 = PRESENTATION_STYLE_ASSIGNMENT((#272629)); +#272629 = SURFACE_STYLE_USAGE(.BOTH.,#272630); +#272630 = SURFACE_SIDE_STYLE('',(#272631)); +#272631 = SURFACE_STYLE_FILL_AREA(#272632); +#272632 = FILL_AREA_STYLE('',(#272633)); +#272633 = FILL_AREA_STYLE_COLOUR('',#270350); +#272634 = STYLED_ITEM('color',(#272635),#58098); +#272635 = PRESENTATION_STYLE_ASSIGNMENT((#272636)); +#272636 = SURFACE_STYLE_USAGE(.BOTH.,#272637); +#272637 = SURFACE_SIDE_STYLE('',(#272638)); +#272638 = SURFACE_STYLE_FILL_AREA(#272639); +#272639 = FILL_AREA_STYLE('',(#272640)); +#272640 = FILL_AREA_STYLE_COLOUR('',#270441); +#272641 = STYLED_ITEM('color',(#272642),#58130); +#272642 = PRESENTATION_STYLE_ASSIGNMENT((#272643)); +#272643 = SURFACE_STYLE_USAGE(.BOTH.,#272644); +#272644 = SURFACE_SIDE_STYLE('',(#272645)); +#272645 = SURFACE_STYLE_FILL_AREA(#272646); +#272646 = FILL_AREA_STYLE('',(#272647)); +#272647 = FILL_AREA_STYLE_COLOUR('',#270441); +#272648 = STYLED_ITEM('color',(#272649),#58147); +#272649 = PRESENTATION_STYLE_ASSIGNMENT((#272650)); +#272650 = SURFACE_STYLE_USAGE(.BOTH.,#272651); +#272651 = SURFACE_SIDE_STYLE('',(#272652)); +#272652 = SURFACE_STYLE_FILL_AREA(#272653); +#272653 = FILL_AREA_STYLE('',(#272654)); +#272654 = FILL_AREA_STYLE_COLOUR('',#270441); +#272655 = STYLED_ITEM('color',(#272656),#58179); +#272656 = PRESENTATION_STYLE_ASSIGNMENT((#272657)); +#272657 = SURFACE_STYLE_USAGE(.BOTH.,#272658); +#272658 = SURFACE_SIDE_STYLE('',(#272659)); +#272659 = SURFACE_STYLE_FILL_AREA(#272660); +#272660 = FILL_AREA_STYLE('',(#272661)); +#272661 = FILL_AREA_STYLE_COLOUR('',#270441); +#272662 = STYLED_ITEM('color',(#272663),#58211); +#272663 = PRESENTATION_STYLE_ASSIGNMENT((#272664)); +#272664 = SURFACE_STYLE_USAGE(.BOTH.,#272665); +#272665 = SURFACE_SIDE_STYLE('',(#272666)); +#272666 = SURFACE_STYLE_FILL_AREA(#272667); +#272667 = FILL_AREA_STYLE('',(#272668)); +#272668 = FILL_AREA_STYLE_COLOUR('',#270441); +#272669 = STYLED_ITEM('color',(#272670),#58228); +#272670 = PRESENTATION_STYLE_ASSIGNMENT((#272671)); +#272671 = SURFACE_STYLE_USAGE(.BOTH.,#272672); +#272672 = SURFACE_SIDE_STYLE('',(#272673)); +#272673 = SURFACE_STYLE_FILL_AREA(#272674); +#272674 = FILL_AREA_STYLE('',(#272675)); +#272675 = FILL_AREA_STYLE_COLOUR('',#270441); +#272676 = STYLED_ITEM('color',(#272677),#58260); +#272677 = PRESENTATION_STYLE_ASSIGNMENT((#272678)); +#272678 = SURFACE_STYLE_USAGE(.BOTH.,#272679); +#272679 = SURFACE_SIDE_STYLE('',(#272680)); +#272680 = SURFACE_STYLE_FILL_AREA(#272681); +#272681 = FILL_AREA_STYLE('',(#272682)); +#272682 = FILL_AREA_STYLE_COLOUR('',#270441); +#272683 = STYLED_ITEM('color',(#272684),#58292); +#272684 = PRESENTATION_STYLE_ASSIGNMENT((#272685)); +#272685 = SURFACE_STYLE_USAGE(.BOTH.,#272686); +#272686 = SURFACE_SIDE_STYLE('',(#272687)); +#272687 = SURFACE_STYLE_FILL_AREA(#272688); +#272688 = FILL_AREA_STYLE('',(#272689)); +#272689 = FILL_AREA_STYLE_COLOUR('',#270441); +#272690 = STYLED_ITEM('color',(#272691),#58309); +#272691 = PRESENTATION_STYLE_ASSIGNMENT((#272692)); +#272692 = SURFACE_STYLE_USAGE(.BOTH.,#272693); +#272693 = SURFACE_SIDE_STYLE('',(#272694)); +#272694 = SURFACE_STYLE_FILL_AREA(#272695); +#272695 = FILL_AREA_STYLE('',(#272696)); +#272696 = FILL_AREA_STYLE_COLOUR('',#270441); +#272697 = STYLED_ITEM('color',(#272698),#58341); +#272698 = PRESENTATION_STYLE_ASSIGNMENT((#272699)); +#272699 = SURFACE_STYLE_USAGE(.BOTH.,#272700); +#272700 = SURFACE_SIDE_STYLE('',(#272701)); +#272701 = SURFACE_STYLE_FILL_AREA(#272702); +#272702 = FILL_AREA_STYLE('',(#272703)); +#272703 = FILL_AREA_STYLE_COLOUR('',#270441); +#272704 = STYLED_ITEM('color',(#272705),#58358); +#272705 = PRESENTATION_STYLE_ASSIGNMENT((#272706)); +#272706 = SURFACE_STYLE_USAGE(.BOTH.,#272707); +#272707 = SURFACE_SIDE_STYLE('',(#272708)); +#272708 = SURFACE_STYLE_FILL_AREA(#272709); +#272709 = FILL_AREA_STYLE('',(#272710)); +#272710 = FILL_AREA_STYLE_COLOUR('',#270441); +#272711 = STYLED_ITEM('color',(#272712),#58390); +#272712 = PRESENTATION_STYLE_ASSIGNMENT((#272713)); +#272713 = SURFACE_STYLE_USAGE(.BOTH.,#272714); +#272714 = SURFACE_SIDE_STYLE('',(#272715)); +#272715 = SURFACE_STYLE_FILL_AREA(#272716); +#272716 = FILL_AREA_STYLE('',(#272717)); +#272717 = FILL_AREA_STYLE_COLOUR('',#270441); +#272718 = STYLED_ITEM('color',(#272719),#58422); +#272719 = PRESENTATION_STYLE_ASSIGNMENT((#272720)); +#272720 = SURFACE_STYLE_USAGE(.BOTH.,#272721); +#272721 = SURFACE_SIDE_STYLE('',(#272722)); +#272722 = SURFACE_STYLE_FILL_AREA(#272723); +#272723 = FILL_AREA_STYLE('',(#272724)); +#272724 = FILL_AREA_STYLE_COLOUR('',#270441); +#272725 = STYLED_ITEM('color',(#272726),#58439); +#272726 = PRESENTATION_STYLE_ASSIGNMENT((#272727)); +#272727 = SURFACE_STYLE_USAGE(.BOTH.,#272728); +#272728 = SURFACE_SIDE_STYLE('',(#272729)); +#272729 = SURFACE_STYLE_FILL_AREA(#272730); +#272730 = FILL_AREA_STYLE('',(#272731)); +#272731 = FILL_AREA_STYLE_COLOUR('',#270350); +#272732 = STYLED_ITEM('color',(#272733),#58456); +#272733 = PRESENTATION_STYLE_ASSIGNMENT((#272734)); +#272734 = SURFACE_STYLE_USAGE(.BOTH.,#272735); +#272735 = SURFACE_SIDE_STYLE('',(#272736)); +#272736 = SURFACE_STYLE_FILL_AREA(#272737); +#272737 = FILL_AREA_STYLE('',(#272738)); +#272738 = FILL_AREA_STYLE_COLOUR('',#270441); +#272739 = STYLED_ITEM('color',(#272740),#58473); +#272740 = PRESENTATION_STYLE_ASSIGNMENT((#272741)); +#272741 = SURFACE_STYLE_USAGE(.BOTH.,#272742); +#272742 = SURFACE_SIDE_STYLE('',(#272743)); +#272743 = SURFACE_STYLE_FILL_AREA(#272744); +#272744 = FILL_AREA_STYLE('',(#272745)); +#272745 = FILL_AREA_STYLE_COLOUR('',#270350); +#272746 = STYLED_ITEM('color',(#272747),#58496); +#272747 = PRESENTATION_STYLE_ASSIGNMENT((#272748)); +#272748 = SURFACE_STYLE_USAGE(.BOTH.,#272749); +#272749 = SURFACE_SIDE_STYLE('',(#272750)); +#272750 = SURFACE_STYLE_FILL_AREA(#272751); +#272751 = FILL_AREA_STYLE('',(#272752)); +#272752 = FILL_AREA_STYLE_COLOUR('',#270441); +#272753 = STYLED_ITEM('color',(#272754),#58513); +#272754 = PRESENTATION_STYLE_ASSIGNMENT((#272755)); +#272755 = SURFACE_STYLE_USAGE(.BOTH.,#272756); +#272756 = SURFACE_SIDE_STYLE('',(#272757)); +#272757 = SURFACE_STYLE_FILL_AREA(#272758); +#272758 = FILL_AREA_STYLE('',(#272759)); +#272759 = FILL_AREA_STYLE_COLOUR('',#270441); +#272760 = STYLED_ITEM('color',(#272761),#58525); +#272761 = PRESENTATION_STYLE_ASSIGNMENT((#272762)); +#272762 = SURFACE_STYLE_USAGE(.BOTH.,#272763); +#272763 = SURFACE_SIDE_STYLE('',(#272764)); +#272764 = SURFACE_STYLE_FILL_AREA(#272765); +#272765 = FILL_AREA_STYLE('',(#272766)); +#272766 = FILL_AREA_STYLE_COLOUR('',#270441); +#272767 = STYLED_ITEM('color',(#272768),#58542); +#272768 = PRESENTATION_STYLE_ASSIGNMENT((#272769)); +#272769 = SURFACE_STYLE_USAGE(.BOTH.,#272770); +#272770 = SURFACE_SIDE_STYLE('',(#272771)); +#272771 = SURFACE_STYLE_FILL_AREA(#272772); +#272772 = FILL_AREA_STYLE('',(#272773)); +#272773 = FILL_AREA_STYLE_COLOUR('',#270441); +#272774 = STYLED_ITEM('color',(#272775),#58559); +#272775 = PRESENTATION_STYLE_ASSIGNMENT((#272776)); +#272776 = SURFACE_STYLE_USAGE(.BOTH.,#272777); +#272777 = SURFACE_SIDE_STYLE('',(#272778)); +#272778 = SURFACE_STYLE_FILL_AREA(#272779); +#272779 = FILL_AREA_STYLE('',(#272780)); +#272780 = FILL_AREA_STYLE_COLOUR('',#270441); +#272781 = STYLED_ITEM('color',(#272782),#58576); +#272782 = PRESENTATION_STYLE_ASSIGNMENT((#272783)); +#272783 = SURFACE_STYLE_USAGE(.BOTH.,#272784); +#272784 = SURFACE_SIDE_STYLE('',(#272785)); +#272785 = SURFACE_STYLE_FILL_AREA(#272786); +#272786 = FILL_AREA_STYLE('',(#272787)); +#272787 = FILL_AREA_STYLE_COLOUR('',#270441); +#272788 = STYLED_ITEM('color',(#272789),#58588); +#272789 = PRESENTATION_STYLE_ASSIGNMENT((#272790)); +#272790 = SURFACE_STYLE_USAGE(.BOTH.,#272791); +#272791 = SURFACE_SIDE_STYLE('',(#272792)); +#272792 = SURFACE_STYLE_FILL_AREA(#272793); +#272793 = FILL_AREA_STYLE('',(#272794)); +#272794 = FILL_AREA_STYLE_COLOUR('',#270441); +#272795 = STYLED_ITEM('color',(#272796),#58600); +#272796 = PRESENTATION_STYLE_ASSIGNMENT((#272797)); +#272797 = SURFACE_STYLE_USAGE(.BOTH.,#272798); +#272798 = SURFACE_SIDE_STYLE('',(#272799)); +#272799 = SURFACE_STYLE_FILL_AREA(#272800); +#272800 = FILL_AREA_STYLE('',(#272801)); +#272801 = FILL_AREA_STYLE_COLOUR('',#270441); +#272802 = STYLED_ITEM('color',(#272803),#58612); +#272803 = PRESENTATION_STYLE_ASSIGNMENT((#272804)); +#272804 = SURFACE_STYLE_USAGE(.BOTH.,#272805); +#272805 = SURFACE_SIDE_STYLE('',(#272806)); +#272806 = SURFACE_STYLE_FILL_AREA(#272807); +#272807 = FILL_AREA_STYLE('',(#272808)); +#272808 = FILL_AREA_STYLE_COLOUR('',#270441); +#272809 = STYLED_ITEM('color',(#272810),#58624); +#272810 = PRESENTATION_STYLE_ASSIGNMENT((#272811)); +#272811 = SURFACE_STYLE_USAGE(.BOTH.,#272812); +#272812 = SURFACE_SIDE_STYLE('',(#272813)); +#272813 = SURFACE_STYLE_FILL_AREA(#272814); +#272814 = FILL_AREA_STYLE('',(#272815)); +#272815 = FILL_AREA_STYLE_COLOUR('',#271711); +#272816 = STYLED_ITEM('color',(#272817),#58649); +#272817 = PRESENTATION_STYLE_ASSIGNMENT((#272818)); +#272818 = SURFACE_STYLE_USAGE(.BOTH.,#272819); +#272819 = SURFACE_SIDE_STYLE('',(#272820)); +#272820 = SURFACE_STYLE_FILL_AREA(#272821); +#272821 = FILL_AREA_STYLE('',(#272822)); +#272822 = FILL_AREA_STYLE_COLOUR('',#271711); +#272823 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #272824,#272834,#272843,#272852,#272861,#272870,#272879,#272888, + #272897,#272906,#272915,#272924,#272933,#272942,#272951,#272960, + #272969,#272978,#272987,#272996,#273005,#273014,#273023,#273032, + #273041,#273050,#273059,#273068,#273077,#273086,#273095,#273104, + #273113,#273122,#273131,#273140,#273149,#273158,#273167,#273176, + #273185,#273194,#273203,#273212,#273221,#273230,#273239,#273248, + #273257,#273266,#273275,#273284,#273293,#273302,#273311,#273320, + #273329,#273338,#273347,#273356,#273365,#273374,#273383,#273392, + #273401,#273410,#273419,#273428,#273437,#273446,#273455,#273464, + #273473,#273482,#273491,#273500,#273509,#273518,#273527,#273536, + #273545,#273554,#273563,#273572,#273581,#273590,#273599,#273608, + #273617,#273626,#273635,#273644,#273653,#273662,#273671,#273680, + #273689,#273698,#273707,#273716,#273725,#273734,#273743,#273752, + #273761,#273770,#273779,#273788,#273797,#273806,#273815,#273824, + #273833,#273842,#273851,#273860,#273869,#273878,#273887,#273896, + #273905,#273914,#273923,#273932,#273941,#273950,#273959,#273968, + #273977,#273986,#273995,#274004,#274013,#274022,#274031,#274040, + #274049,#274058,#274067,#274076,#274085,#274094,#274103,#274112, + #274121,#274130,#274139,#274148,#274157,#274166,#274175,#274184, + #274193,#274202,#274211,#274220,#274229,#274238,#274247,#274256, + #274265,#274274,#274283,#274292,#274301,#274310,#274319,#274328, + #274337,#274346,#274355,#274364,#274373,#274382,#274391,#274400, + #274409,#274418,#274427,#274436,#274445,#274454,#274463,#274472, + #274481,#274490,#274499,#274508,#274517,#274526,#274535,#274544, + #274553,#274562,#274571,#274580,#274589,#274598,#274607,#274616, + #274625,#274634,#274643,#274652,#274661,#274670,#274679,#274688, + #274697,#274706,#274715,#274724,#274733,#274742,#274751,#274760, + #274769,#274778,#274787,#274796,#274805,#274814,#274823,#274832, + #274841,#274850,#274859,#274868,#274877,#274886,#274895,#274904, + #274913,#274922,#274931,#274940,#274949,#274958,#274967,#274976, + #274985,#274994,#275003,#275012,#275021,#275030,#275039,#275048, + #275057,#275066,#275075,#275084,#275093,#275102,#275111,#275120, + #275129,#275138,#275147,#275156,#275165,#275174,#275183,#275192, + #275201,#275210,#275219,#275228,#275237,#275246,#275255,#275264, + #275273,#275282,#275291,#275300,#275309,#275318,#275327,#275336, + #275345,#275354,#275363,#275372,#275381,#275390,#275399,#275408, + #275417,#275426,#275435,#275444,#275453,#275462,#275471,#275480, + #275489,#275498,#275507,#275516,#275525,#275534,#275543,#275552, + #275561,#275570,#275579,#275588,#275597,#275606,#275615,#275624, + #275633,#275642,#275651,#275660,#275669,#275678,#275687,#275696, + #275705,#275714,#275723,#275732,#275741,#275750,#275759,#275768, + #275777,#275786,#275795,#275804,#275813,#275822,#275831,#275840, + #275849,#275858,#275867,#275876,#275885,#275894,#275903,#275912, + #275921,#275930,#275939,#275948,#275957,#275966,#275975,#275984, + #275993,#276002,#276011,#276020,#276029,#276038,#276047,#276056, + #276065,#276074,#276083,#276092,#276101,#276110,#276119,#276128, + #276137,#276146,#276155,#276164,#276173,#276182,#276191,#276200, + #276209,#276218,#276227,#276236,#276245,#276254,#276263,#276272, + #276281,#276290,#276299,#276308,#276317,#276326,#276335,#276344, + #276353,#276362,#276371,#276380,#276389,#276398,#276407,#276416, + #276425,#276434,#276443,#276452,#276461,#276470,#276479,#276488, + #276497,#276506,#276515,#276524,#276533,#276542,#276551,#276560, + #276569,#276578,#276587,#276596,#276605,#276614,#276623,#276632, + #276641,#276650,#276659,#276668,#276677,#276686,#276695,#276704, + #276713,#276722,#276731,#276740,#276749,#276758,#276767,#276776, + #276785,#276794,#276803,#276812,#276821,#276830,#276839,#276848, + #276857,#276866,#276875,#276884,#276893,#276902,#276911,#276920, + #276929,#276938,#276947,#276956,#276965,#276974,#276983,#276992, + #277001,#277010,#277019,#277028,#277037,#277046,#277055,#277064, + #277073,#277082,#277091,#277100,#277109,#277118,#277127,#277136, + #277145,#277154,#277163,#277172,#277181,#277190,#277199,#277208, + #277217,#277226,#277235,#277244,#277253,#277262,#277271,#277280, + #277289,#277298,#277307,#277316,#277325,#277334,#277343,#277352, + #277361,#277370,#277379,#277388,#277397,#277406,#277415,#277424, + #277433,#277442,#277451,#277460,#277469,#277478,#277487,#277496, + #277505,#277514,#277523,#277532,#277541,#277550,#277559,#277568, + #277577,#277586,#277595,#277604,#277613,#277622,#277631,#277640, + #277649,#277658,#277667,#277676,#277685,#277694,#277703,#277712, + #277721,#277730,#277739,#277748,#277757,#277766,#277775,#277784, + #277793,#277802,#277811,#277820,#277829,#277838,#277847,#277856, + #277865,#277874,#277883,#277892,#277901,#277910,#277919,#277928, + #277937,#277946,#277955,#277964,#277973,#277982,#277991,#278000, + #278009,#278018,#278027,#278036,#278045,#278054,#278063,#278072, + #278081,#278090,#278099,#278108,#278117,#278126,#278135,#278144, + #278153,#278162,#278171,#278180,#278189,#278198,#278207,#278216, + #278225,#278234,#278243,#278252,#278261,#278270,#278279,#278288, + #278297,#278306,#278315,#278324,#278333,#278342,#278351,#278360, + #278369,#278378,#278387,#278396,#278405,#278414,#278423,#278432, + #278441,#278450,#278459,#278468,#278477,#278486,#278495,#278504, + #278513,#278522,#278531,#278540,#278549,#278558,#278567,#278576, + #278585,#278594,#278603,#278612,#278621,#278630,#278639,#278648, + #278657,#278666,#278675,#278684,#278693,#278702,#278711,#278720, + #278729,#278738,#278747,#278756,#278765,#278774,#278783,#278792, + #278801,#278810,#278819,#278828,#278837,#278846,#278855,#278864, + #278873,#278882,#278891,#278900,#278909,#278918,#278927,#278936, + #278945,#278954,#278963,#278972,#278981,#278990,#278999,#279008, + #279017,#279026,#279035,#279044,#279053,#279062,#279071,#279080, + #279089,#279098,#279107,#279116,#279125,#279134,#279143,#279152, + #279161,#279170,#279179,#279188,#279197,#279206,#279215,#279224, + #279233,#279242,#279251,#279260,#279269,#279278,#279287,#279296, + #279305,#279314,#279323,#279332,#279341,#279350,#279359,#279368, + #279377,#279386,#279395,#279404,#279413,#279422,#279431,#279440, + #279449,#279458,#279467,#279476,#279485,#279494,#279503,#279512, + #279521,#279530,#279539,#279548,#279557,#279566,#279575,#279584, + #279593,#279602,#279611,#279620,#279629,#279638,#279647,#279656, + #279665,#279674,#279683,#279692,#279701,#279710,#279719,#279728, + #279737,#279746,#279755,#279764,#279773,#279782,#279791,#279800, + #279809,#279818,#279827,#279836,#279845,#279854,#279863,#279872, + #279881,#279890,#279899,#279908,#279917,#279926,#279935,#279944, + #279953,#279962,#279971,#279980,#279989,#279998,#280007,#280016, + #280025,#280034,#280043,#280052,#280061,#280070,#280079,#280088, + #280097,#280106,#280115,#280124,#280133,#280142,#280151,#280160, + #280169,#280178,#280187,#280196,#280205,#280214,#280223,#280232, + #280241,#280250,#280259,#280268,#280277,#280286,#280295,#280304, + #280313,#280322,#280331,#280340,#280349,#280358,#280367,#280376, + #280385,#280394,#280403,#280412,#280421,#280430,#280439,#280448, + #280457,#280466,#280475,#280484,#280493,#280502,#280511,#280520, + #280529,#280538,#280547,#280556,#280565,#280574,#280583,#280592, + #280601,#280610,#280619,#280628,#280637,#280646,#280655,#280664, + #280673,#280682,#280691,#280700,#280709,#280718,#280727,#280736, + #280745,#280754,#280763,#280772,#280781,#280790,#280799,#280808, + #280817,#280826,#280835,#280844,#280853,#280862,#280871,#280880, + #280889,#280898,#280907,#280916,#280925,#280934,#280943,#280952, + #280961,#280970,#280979,#280988,#280997,#281006,#281015,#281024, + #281033,#281042,#281051,#281060,#281069,#281078,#281087),#257957); +#272824 = STYLED_ITEM('color',(#272825),#123057); +#272825 = PRESENTATION_STYLE_ASSIGNMENT((#272826)); +#272826 = SURFACE_STYLE_USAGE(.BOTH.,#272827); +#272827 = SURFACE_SIDE_STYLE('',(#272828,#272832)); +#272828 = SURFACE_STYLE_FILL_AREA(#272829); +#272829 = FILL_AREA_STYLE('',(#272830)); +#272830 = FILL_AREA_STYLE_COLOUR('',#272831); +#272831 = DRAUGHTING_PRE_DEFINED_COLOUR('white'); +#272832 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272833)); +#272833 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272834 = STYLED_ITEM('color',(#272835),#123125); +#272835 = PRESENTATION_STYLE_ASSIGNMENT((#272836)); +#272836 = SURFACE_STYLE_USAGE(.BOTH.,#272837); +#272837 = SURFACE_SIDE_STYLE('',(#272838,#272841)); +#272838 = SURFACE_STYLE_FILL_AREA(#272839); +#272839 = FILL_AREA_STYLE('',(#272840)); +#272840 = FILL_AREA_STYLE_COLOUR('',#272831); +#272841 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272842)); +#272842 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272843 = STYLED_ITEM('color',(#272844),#123169); +#272844 = PRESENTATION_STYLE_ASSIGNMENT((#272845)); +#272845 = SURFACE_STYLE_USAGE(.BOTH.,#272846); +#272846 = SURFACE_SIDE_STYLE('',(#272847,#272850)); +#272847 = SURFACE_STYLE_FILL_AREA(#272848); +#272848 = FILL_AREA_STYLE('',(#272849)); +#272849 = FILL_AREA_STYLE_COLOUR('',#272831); +#272850 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272851)); +#272851 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272852 = STYLED_ITEM('color',(#272853),#123415); +#272853 = PRESENTATION_STYLE_ASSIGNMENT((#272854)); +#272854 = SURFACE_STYLE_USAGE(.BOTH.,#272855); +#272855 = SURFACE_SIDE_STYLE('',(#272856,#272859)); +#272856 = SURFACE_STYLE_FILL_AREA(#272857); +#272857 = FILL_AREA_STYLE('',(#272858)); +#272858 = FILL_AREA_STYLE_COLOUR('',#272831); +#272859 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272860)); +#272860 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272861 = STYLED_ITEM('color',(#272862),#123517); +#272862 = PRESENTATION_STYLE_ASSIGNMENT((#272863)); +#272863 = SURFACE_STYLE_USAGE(.BOTH.,#272864); +#272864 = SURFACE_SIDE_STYLE('',(#272865,#272868)); +#272865 = SURFACE_STYLE_FILL_AREA(#272866); +#272866 = FILL_AREA_STYLE('',(#272867)); +#272867 = FILL_AREA_STYLE_COLOUR('',#272831); +#272868 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272869)); +#272869 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272870 = STYLED_ITEM('color',(#272871),#124076); +#272871 = PRESENTATION_STYLE_ASSIGNMENT((#272872)); +#272872 = SURFACE_STYLE_USAGE(.BOTH.,#272873); +#272873 = SURFACE_SIDE_STYLE('',(#272874,#272877)); +#272874 = SURFACE_STYLE_FILL_AREA(#272875); +#272875 = FILL_AREA_STYLE('',(#272876)); +#272876 = FILL_AREA_STYLE_COLOUR('',#272831); +#272877 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272878)); +#272878 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272879 = STYLED_ITEM('color',(#272880),#124376); +#272880 = PRESENTATION_STYLE_ASSIGNMENT((#272881)); +#272881 = SURFACE_STYLE_USAGE(.BOTH.,#272882); +#272882 = SURFACE_SIDE_STYLE('',(#272883,#272886)); +#272883 = SURFACE_STYLE_FILL_AREA(#272884); +#272884 = FILL_AREA_STYLE('',(#272885)); +#272885 = FILL_AREA_STYLE_COLOUR('',#272831); +#272886 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272887)); +#272887 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272888 = STYLED_ITEM('color',(#272889),#124637); +#272889 = PRESENTATION_STYLE_ASSIGNMENT((#272890)); +#272890 = SURFACE_STYLE_USAGE(.BOTH.,#272891); +#272891 = SURFACE_SIDE_STYLE('',(#272892,#272895)); +#272892 = SURFACE_STYLE_FILL_AREA(#272893); +#272893 = FILL_AREA_STYLE('',(#272894)); +#272894 = FILL_AREA_STYLE_COLOUR('',#272831); +#272895 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272896)); +#272896 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272897 = STYLED_ITEM('color',(#272898),#125681); +#272898 = PRESENTATION_STYLE_ASSIGNMENT((#272899)); +#272899 = SURFACE_STYLE_USAGE(.BOTH.,#272900); +#272900 = SURFACE_SIDE_STYLE('',(#272901,#272904)); +#272901 = SURFACE_STYLE_FILL_AREA(#272902); +#272902 = FILL_AREA_STYLE('',(#272903)); +#272903 = FILL_AREA_STYLE_COLOUR('',#272831); +#272904 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272905)); +#272905 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272906 = STYLED_ITEM('color',(#272907),#126002); +#272907 = PRESENTATION_STYLE_ASSIGNMENT((#272908)); +#272908 = SURFACE_STYLE_USAGE(.BOTH.,#272909); +#272909 = SURFACE_SIDE_STYLE('',(#272910,#272913)); +#272910 = SURFACE_STYLE_FILL_AREA(#272911); +#272911 = FILL_AREA_STYLE('',(#272912)); +#272912 = FILL_AREA_STYLE_COLOUR('',#272831); +#272913 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272914)); +#272914 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272915 = STYLED_ITEM('color',(#272916),#126104); +#272916 = PRESENTATION_STYLE_ASSIGNMENT((#272917)); +#272917 = SURFACE_STYLE_USAGE(.BOTH.,#272918); +#272918 = SURFACE_SIDE_STYLE('',(#272919,#272922)); +#272919 = SURFACE_STYLE_FILL_AREA(#272920); +#272920 = FILL_AREA_STYLE('',(#272921)); +#272921 = FILL_AREA_STYLE_COLOUR('',#272831); +#272922 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272923)); +#272923 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272924 = STYLED_ITEM('color',(#272925),#126391); +#272925 = PRESENTATION_STYLE_ASSIGNMENT((#272926)); +#272926 = SURFACE_STYLE_USAGE(.BOTH.,#272927); +#272927 = SURFACE_SIDE_STYLE('',(#272928,#272931)); +#272928 = SURFACE_STYLE_FILL_AREA(#272929); +#272929 = FILL_AREA_STYLE('',(#272930)); +#272930 = FILL_AREA_STYLE_COLOUR('',#272831); +#272931 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272932)); +#272932 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272933 = STYLED_ITEM('color',(#272934),#126678); +#272934 = PRESENTATION_STYLE_ASSIGNMENT((#272935)); +#272935 = SURFACE_STYLE_USAGE(.BOTH.,#272936); +#272936 = SURFACE_SIDE_STYLE('',(#272937,#272940)); +#272937 = SURFACE_STYLE_FILL_AREA(#272938); +#272938 = FILL_AREA_STYLE('',(#272939)); +#272939 = FILL_AREA_STYLE_COLOUR('',#272831); +#272940 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272941)); +#272941 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272942 = STYLED_ITEM('color',(#272943),#126965); +#272943 = PRESENTATION_STYLE_ASSIGNMENT((#272944)); +#272944 = SURFACE_STYLE_USAGE(.BOTH.,#272945); +#272945 = SURFACE_SIDE_STYLE('',(#272946,#272949)); +#272946 = SURFACE_STYLE_FILL_AREA(#272947); +#272947 = FILL_AREA_STYLE('',(#272948)); +#272948 = FILL_AREA_STYLE_COLOUR('',#272831); +#272949 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272950)); +#272950 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272951 = STYLED_ITEM('color',(#272952),#127187); +#272952 = PRESENTATION_STYLE_ASSIGNMENT((#272953)); +#272953 = SURFACE_STYLE_USAGE(.BOTH.,#272954); +#272954 = SURFACE_SIDE_STYLE('',(#272955,#272958)); +#272955 = SURFACE_STYLE_FILL_AREA(#272956); +#272956 = FILL_AREA_STYLE('',(#272957)); +#272957 = FILL_AREA_STYLE_COLOUR('',#272831); +#272958 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272959)); +#272959 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272960 = STYLED_ITEM('color',(#272961),#127314); +#272961 = PRESENTATION_STYLE_ASSIGNMENT((#272962)); +#272962 = SURFACE_STYLE_USAGE(.BOTH.,#272963); +#272963 = SURFACE_SIDE_STYLE('',(#272964,#272967)); +#272964 = SURFACE_STYLE_FILL_AREA(#272965); +#272965 = FILL_AREA_STYLE('',(#272966)); +#272966 = FILL_AREA_STYLE_COLOUR('',#272831); +#272967 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272968)); +#272968 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272969 = STYLED_ITEM('color',(#272970),#127441); +#272970 = PRESENTATION_STYLE_ASSIGNMENT((#272971)); +#272971 = SURFACE_STYLE_USAGE(.BOTH.,#272972); +#272972 = SURFACE_SIDE_STYLE('',(#272973,#272976)); +#272973 = SURFACE_STYLE_FILL_AREA(#272974); +#272974 = FILL_AREA_STYLE('',(#272975)); +#272975 = FILL_AREA_STYLE_COLOUR('',#272831); +#272976 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272977)); +#272977 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272978 = STYLED_ITEM('color',(#272979),#127568); +#272979 = PRESENTATION_STYLE_ASSIGNMENT((#272980)); +#272980 = SURFACE_STYLE_USAGE(.BOTH.,#272981); +#272981 = SURFACE_SIDE_STYLE('',(#272982,#272985)); +#272982 = SURFACE_STYLE_FILL_AREA(#272983); +#272983 = FILL_AREA_STYLE('',(#272984)); +#272984 = FILL_AREA_STYLE_COLOUR('',#272831); +#272985 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272986)); +#272986 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272987 = STYLED_ITEM('color',(#272988),#127676); +#272988 = PRESENTATION_STYLE_ASSIGNMENT((#272989)); +#272989 = SURFACE_STYLE_USAGE(.BOTH.,#272990); +#272990 = SURFACE_SIDE_STYLE('',(#272991,#272994)); +#272991 = SURFACE_STYLE_FILL_AREA(#272992); +#272992 = FILL_AREA_STYLE('',(#272993)); +#272993 = FILL_AREA_STYLE_COLOUR('',#272831); +#272994 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#272995)); +#272995 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#272996 = STYLED_ITEM('color',(#272997),#127754); +#272997 = PRESENTATION_STYLE_ASSIGNMENT((#272998)); +#272998 = SURFACE_STYLE_USAGE(.BOTH.,#272999); +#272999 = SURFACE_SIDE_STYLE('',(#273000,#273003)); +#273000 = SURFACE_STYLE_FILL_AREA(#273001); +#273001 = FILL_AREA_STYLE('',(#273002)); +#273002 = FILL_AREA_STYLE_COLOUR('',#272831); +#273003 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273004)); +#273004 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273005 = STYLED_ITEM('color',(#273006),#127928); +#273006 = PRESENTATION_STYLE_ASSIGNMENT((#273007)); +#273007 = SURFACE_STYLE_USAGE(.BOTH.,#273008); +#273008 = SURFACE_SIDE_STYLE('',(#273009,#273012)); +#273009 = SURFACE_STYLE_FILL_AREA(#273010); +#273010 = FILL_AREA_STYLE('',(#273011)); +#273011 = FILL_AREA_STYLE_COLOUR('',#272831); +#273012 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273013)); +#273013 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273014 = STYLED_ITEM('color',(#273015),#128109); +#273015 = PRESENTATION_STYLE_ASSIGNMENT((#273016)); +#273016 = SURFACE_STYLE_USAGE(.BOTH.,#273017); +#273017 = SURFACE_SIDE_STYLE('',(#273018,#273021)); +#273018 = SURFACE_STYLE_FILL_AREA(#273019); +#273019 = FILL_AREA_STYLE('',(#273020)); +#273020 = FILL_AREA_STYLE_COLOUR('',#272831); +#273021 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273022)); +#273022 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273023 = STYLED_ITEM('color',(#273024),#128187); +#273024 = PRESENTATION_STYLE_ASSIGNMENT((#273025)); +#273025 = SURFACE_STYLE_USAGE(.BOTH.,#273026); +#273026 = SURFACE_SIDE_STYLE('',(#273027,#273030)); +#273027 = SURFACE_STYLE_FILL_AREA(#273028); +#273028 = FILL_AREA_STYLE('',(#273029)); +#273029 = FILL_AREA_STYLE_COLOUR('',#272831); +#273030 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273031)); +#273031 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273032 = STYLED_ITEM('color',(#273033),#128385); +#273033 = PRESENTATION_STYLE_ASSIGNMENT((#273034)); +#273034 = SURFACE_STYLE_USAGE(.BOTH.,#273035); +#273035 = SURFACE_SIDE_STYLE('',(#273036,#273039)); +#273036 = SURFACE_STYLE_FILL_AREA(#273037); +#273037 = FILL_AREA_STYLE('',(#273038)); +#273038 = FILL_AREA_STYLE_COLOUR('',#272831); +#273039 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273040)); +#273040 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273041 = STYLED_ITEM('color',(#273042),#128559); +#273042 = PRESENTATION_STYLE_ASSIGNMENT((#273043)); +#273043 = SURFACE_STYLE_USAGE(.BOTH.,#273044); +#273044 = SURFACE_SIDE_STYLE('',(#273045,#273048)); +#273045 = SURFACE_STYLE_FILL_AREA(#273046); +#273046 = FILL_AREA_STYLE('',(#273047)); +#273047 = FILL_AREA_STYLE_COLOUR('',#272831); +#273048 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273049)); +#273049 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273050 = STYLED_ITEM('color',(#273051),#129045); +#273051 = PRESENTATION_STYLE_ASSIGNMENT((#273052)); +#273052 = SURFACE_STYLE_USAGE(.BOTH.,#273053); +#273053 = SURFACE_SIDE_STYLE('',(#273054,#273057)); +#273054 = SURFACE_STYLE_FILL_AREA(#273055); +#273055 = FILL_AREA_STYLE('',(#273056)); +#273056 = FILL_AREA_STYLE_COLOUR('',#272831); +#273057 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273058)); +#273058 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273059 = STYLED_ITEM('color',(#273060),#129474); +#273060 = PRESENTATION_STYLE_ASSIGNMENT((#273061)); +#273061 = SURFACE_STYLE_USAGE(.BOTH.,#273062); +#273062 = SURFACE_SIDE_STYLE('',(#273063,#273066)); +#273063 = SURFACE_STYLE_FILL_AREA(#273064); +#273064 = FILL_AREA_STYLE('',(#273065)); +#273065 = FILL_AREA_STYLE_COLOUR('',#272831); +#273066 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273067)); +#273067 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273068 = STYLED_ITEM('color',(#273069),#129628); +#273069 = PRESENTATION_STYLE_ASSIGNMENT((#273070)); +#273070 = SURFACE_STYLE_USAGE(.BOTH.,#273071); +#273071 = SURFACE_SIDE_STYLE('',(#273072,#273075)); +#273072 = SURFACE_STYLE_FILL_AREA(#273073); +#273073 = FILL_AREA_STYLE('',(#273074)); +#273074 = FILL_AREA_STYLE_COLOUR('',#272831); +#273075 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273076)); +#273076 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273077 = STYLED_ITEM('color',(#273078),#129670); +#273078 = PRESENTATION_STYLE_ASSIGNMENT((#273079)); +#273079 = SURFACE_STYLE_USAGE(.BOTH.,#273080); +#273080 = SURFACE_SIDE_STYLE('',(#273081,#273084)); +#273081 = SURFACE_STYLE_FILL_AREA(#273082); +#273082 = FILL_AREA_STYLE('',(#273083)); +#273083 = FILL_AREA_STYLE_COLOUR('',#272831); +#273084 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273085)); +#273085 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273086 = STYLED_ITEM('color',(#273087),#130009); +#273087 = PRESENTATION_STYLE_ASSIGNMENT((#273088)); +#273088 = SURFACE_STYLE_USAGE(.BOTH.,#273089); +#273089 = SURFACE_SIDE_STYLE('',(#273090,#273093)); +#273090 = SURFACE_STYLE_FILL_AREA(#273091); +#273091 = FILL_AREA_STYLE('',(#273092)); +#273092 = FILL_AREA_STYLE_COLOUR('',#272831); +#273093 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273094)); +#273094 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273095 = STYLED_ITEM('color',(#273096),#130061); +#273096 = PRESENTATION_STYLE_ASSIGNMENT((#273097)); +#273097 = SURFACE_STYLE_USAGE(.BOTH.,#273098); +#273098 = SURFACE_SIDE_STYLE('',(#273099,#273102)); +#273099 = SURFACE_STYLE_FILL_AREA(#273100); +#273100 = FILL_AREA_STYLE('',(#273101)); +#273101 = FILL_AREA_STYLE_COLOUR('',#272831); +#273102 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273103)); +#273103 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273104 = STYLED_ITEM('color',(#273105),#130113); +#273105 = PRESENTATION_STYLE_ASSIGNMENT((#273106)); +#273106 = SURFACE_STYLE_USAGE(.BOTH.,#273107); +#273107 = SURFACE_SIDE_STYLE('',(#273108,#273111)); +#273108 = SURFACE_STYLE_FILL_AREA(#273109); +#273109 = FILL_AREA_STYLE('',(#273110)); +#273110 = FILL_AREA_STYLE_COLOUR('',#272831); +#273111 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273112)); +#273112 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273113 = STYLED_ITEM('color',(#273114),#130207); +#273114 = PRESENTATION_STYLE_ASSIGNMENT((#273115)); +#273115 = SURFACE_STYLE_USAGE(.BOTH.,#273116); +#273116 = SURFACE_SIDE_STYLE('',(#273117,#273120)); +#273117 = SURFACE_STYLE_FILL_AREA(#273118); +#273118 = FILL_AREA_STYLE('',(#273119)); +#273119 = FILL_AREA_STYLE_COLOUR('',#272831); +#273120 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273121)); +#273121 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273122 = STYLED_ITEM('color',(#273123),#130487); +#273123 = PRESENTATION_STYLE_ASSIGNMENT((#273124)); +#273124 = SURFACE_STYLE_USAGE(.BOTH.,#273125); +#273125 = SURFACE_SIDE_STYLE('',(#273126,#273129)); +#273126 = SURFACE_STYLE_FILL_AREA(#273127); +#273127 = FILL_AREA_STYLE('',(#273128)); +#273128 = FILL_AREA_STYLE_COLOUR('',#272831); +#273129 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273130)); +#273130 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273131 = STYLED_ITEM('color',(#273132),#130736); +#273132 = PRESENTATION_STYLE_ASSIGNMENT((#273133)); +#273133 = SURFACE_STYLE_USAGE(.BOTH.,#273134); +#273134 = SURFACE_SIDE_STYLE('',(#273135,#273138)); +#273135 = SURFACE_STYLE_FILL_AREA(#273136); +#273136 = FILL_AREA_STYLE('',(#273137)); +#273137 = FILL_AREA_STYLE_COLOUR('',#272831); +#273138 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273139)); +#273139 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273140 = STYLED_ITEM('color',(#273141),#130871); +#273141 = PRESENTATION_STYLE_ASSIGNMENT((#273142)); +#273142 = SURFACE_STYLE_USAGE(.BOTH.,#273143); +#273143 = SURFACE_SIDE_STYLE('',(#273144,#273147)); +#273144 = SURFACE_STYLE_FILL_AREA(#273145); +#273145 = FILL_AREA_STYLE('',(#273146)); +#273146 = FILL_AREA_STYLE_COLOUR('',#272831); +#273147 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273148)); +#273148 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273149 = STYLED_ITEM('color',(#273150),#130998); +#273150 = PRESENTATION_STYLE_ASSIGNMENT((#273151)); +#273151 = SURFACE_STYLE_USAGE(.BOTH.,#273152); +#273152 = SURFACE_SIDE_STYLE('',(#273153,#273156)); +#273153 = SURFACE_STYLE_FILL_AREA(#273154); +#273154 = FILL_AREA_STYLE('',(#273155)); +#273155 = FILL_AREA_STYLE_COLOUR('',#272831); +#273156 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273157)); +#273157 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273158 = STYLED_ITEM('color',(#273159),#131254); +#273159 = PRESENTATION_STYLE_ASSIGNMENT((#273160)); +#273160 = SURFACE_STYLE_USAGE(.BOTH.,#273161); +#273161 = SURFACE_SIDE_STYLE('',(#273162,#273165)); +#273162 = SURFACE_STYLE_FILL_AREA(#273163); +#273163 = FILL_AREA_STYLE('',(#273164)); +#273164 = FILL_AREA_STYLE_COLOUR('',#272831); +#273165 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273166)); +#273166 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273167 = STYLED_ITEM('color',(#273168),#131526); +#273168 = PRESENTATION_STYLE_ASSIGNMENT((#273169)); +#273169 = SURFACE_STYLE_USAGE(.BOTH.,#273170); +#273170 = SURFACE_SIDE_STYLE('',(#273171,#273174)); +#273171 = SURFACE_STYLE_FILL_AREA(#273172); +#273172 = FILL_AREA_STYLE('',(#273173)); +#273173 = FILL_AREA_STYLE_COLOUR('',#272831); +#273174 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273175)); +#273175 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273176 = STYLED_ITEM('color',(#273177),#131669); +#273177 = PRESENTATION_STYLE_ASSIGNMENT((#273178)); +#273178 = SURFACE_STYLE_USAGE(.BOTH.,#273179); +#273179 = SURFACE_SIDE_STYLE('',(#273180,#273183)); +#273180 = SURFACE_STYLE_FILL_AREA(#273181); +#273181 = FILL_AREA_STYLE('',(#273182)); +#273182 = FILL_AREA_STYLE_COLOUR('',#272831); +#273183 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273184)); +#273184 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273185 = STYLED_ITEM('color',(#273186),#131721); +#273186 = PRESENTATION_STYLE_ASSIGNMENT((#273187)); +#273187 = SURFACE_STYLE_USAGE(.BOTH.,#273188); +#273188 = SURFACE_SIDE_STYLE('',(#273189,#273192)); +#273189 = SURFACE_STYLE_FILL_AREA(#273190); +#273190 = FILL_AREA_STYLE('',(#273191)); +#273191 = FILL_AREA_STYLE_COLOUR('',#272831); +#273192 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273193)); +#273193 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273194 = STYLED_ITEM('color',(#273195),#131773); +#273195 = PRESENTATION_STYLE_ASSIGNMENT((#273196)); +#273196 = SURFACE_STYLE_USAGE(.BOTH.,#273197); +#273197 = SURFACE_SIDE_STYLE('',(#273198,#273201)); +#273198 = SURFACE_STYLE_FILL_AREA(#273199); +#273199 = FILL_AREA_STYLE('',(#273200)); +#273200 = FILL_AREA_STYLE_COLOUR('',#272831); +#273201 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273202)); +#273202 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273203 = STYLED_ITEM('color',(#273204),#131967); +#273204 = PRESENTATION_STYLE_ASSIGNMENT((#273205)); +#273205 = SURFACE_STYLE_USAGE(.BOTH.,#273206); +#273206 = SURFACE_SIDE_STYLE('',(#273207,#273210)); +#273207 = SURFACE_STYLE_FILL_AREA(#273208); +#273208 = FILL_AREA_STYLE('',(#273209)); +#273209 = FILL_AREA_STYLE_COLOUR('',#272831); +#273210 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273211)); +#273211 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273212 = STYLED_ITEM('color',(#273213),#132061); +#273213 = PRESENTATION_STYLE_ASSIGNMENT((#273214)); +#273214 = SURFACE_STYLE_USAGE(.BOTH.,#273215); +#273215 = SURFACE_SIDE_STYLE('',(#273216,#273219)); +#273216 = SURFACE_STYLE_FILL_AREA(#273217); +#273217 = FILL_AREA_STYLE('',(#273218)); +#273218 = FILL_AREA_STYLE_COLOUR('',#272831); +#273219 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273220)); +#273220 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273221 = STYLED_ITEM('color',(#273222),#132105); +#273222 = PRESENTATION_STYLE_ASSIGNMENT((#273223)); +#273223 = SURFACE_STYLE_USAGE(.BOTH.,#273224); +#273224 = SURFACE_SIDE_STYLE('',(#273225,#273228)); +#273225 = SURFACE_STYLE_FILL_AREA(#273226); +#273226 = FILL_AREA_STYLE('',(#273227)); +#273227 = FILL_AREA_STYLE_COLOUR('',#272831); +#273228 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273229)); +#273229 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273230 = STYLED_ITEM('color',(#273231),#132256); +#273231 = PRESENTATION_STYLE_ASSIGNMENT((#273232)); +#273232 = SURFACE_STYLE_USAGE(.BOTH.,#273233); +#273233 = SURFACE_SIDE_STYLE('',(#273234,#273237)); +#273234 = SURFACE_STYLE_FILL_AREA(#273235); +#273235 = FILL_AREA_STYLE('',(#273236)); +#273236 = FILL_AREA_STYLE_COLOUR('',#272831); +#273237 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273238)); +#273238 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273239 = STYLED_ITEM('color',(#273240),#132382); +#273240 = PRESENTATION_STYLE_ASSIGNMENT((#273241)); +#273241 = SURFACE_STYLE_USAGE(.BOTH.,#273242); +#273242 = SURFACE_SIDE_STYLE('',(#273243,#273246)); +#273243 = SURFACE_STYLE_FILL_AREA(#273244); +#273244 = FILL_AREA_STYLE('',(#273245)); +#273245 = FILL_AREA_STYLE_COLOUR('',#272831); +#273246 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273247)); +#273247 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273248 = STYLED_ITEM('color',(#273249),#132599); +#273249 = PRESENTATION_STYLE_ASSIGNMENT((#273250)); +#273250 = SURFACE_STYLE_USAGE(.BOTH.,#273251); +#273251 = SURFACE_SIDE_STYLE('',(#273252,#273255)); +#273252 = SURFACE_STYLE_FILL_AREA(#273253); +#273253 = FILL_AREA_STYLE('',(#273254)); +#273254 = FILL_AREA_STYLE_COLOUR('',#272831); +#273255 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273256)); +#273256 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273257 = STYLED_ITEM('color',(#273258),#132809); +#273258 = PRESENTATION_STYLE_ASSIGNMENT((#273259)); +#273259 = SURFACE_STYLE_USAGE(.BOTH.,#273260); +#273260 = SURFACE_SIDE_STYLE('',(#273261,#273264)); +#273261 = SURFACE_STYLE_FILL_AREA(#273262); +#273262 = FILL_AREA_STYLE('',(#273263)); +#273263 = FILL_AREA_STYLE_COLOUR('',#272831); +#273264 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273265)); +#273265 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273266 = STYLED_ITEM('color',(#273267),#132960); +#273267 = PRESENTATION_STYLE_ASSIGNMENT((#273268)); +#273268 = SURFACE_STYLE_USAGE(.BOTH.,#273269); +#273269 = SURFACE_SIDE_STYLE('',(#273270,#273273)); +#273270 = SURFACE_STYLE_FILL_AREA(#273271); +#273271 = FILL_AREA_STYLE('',(#273272)); +#273272 = FILL_AREA_STYLE_COLOUR('',#272831); +#273273 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273274)); +#273274 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273275 = STYLED_ITEM('color',(#273276),#133086); +#273276 = PRESENTATION_STYLE_ASSIGNMENT((#273277)); +#273277 = SURFACE_STYLE_USAGE(.BOTH.,#273278); +#273278 = SURFACE_SIDE_STYLE('',(#273279,#273282)); +#273279 = SURFACE_STYLE_FILL_AREA(#273280); +#273280 = FILL_AREA_STYLE('',(#273281)); +#273281 = FILL_AREA_STYLE_COLOUR('',#272831); +#273282 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273283)); +#273283 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273284 = STYLED_ITEM('color',(#273285),#133229); +#273285 = PRESENTATION_STYLE_ASSIGNMENT((#273286)); +#273286 = SURFACE_STYLE_USAGE(.BOTH.,#273287); +#273287 = SURFACE_SIDE_STYLE('',(#273288,#273291)); +#273288 = SURFACE_STYLE_FILL_AREA(#273289); +#273289 = FILL_AREA_STYLE('',(#273290)); +#273290 = FILL_AREA_STYLE_COLOUR('',#272831); +#273291 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273292)); +#273292 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273293 = STYLED_ITEM('color',(#273294),#133314); +#273294 = PRESENTATION_STYLE_ASSIGNMENT((#273295)); +#273295 = SURFACE_STYLE_USAGE(.BOTH.,#273296); +#273296 = SURFACE_SIDE_STYLE('',(#273297,#273300)); +#273297 = SURFACE_STYLE_FILL_AREA(#273298); +#273298 = FILL_AREA_STYLE('',(#273299)); +#273299 = FILL_AREA_STYLE_COLOUR('',#272831); +#273300 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273301)); +#273301 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273302 = STYLED_ITEM('color',(#273303),#133456); +#273303 = PRESENTATION_STYLE_ASSIGNMENT((#273304)); +#273304 = SURFACE_STYLE_USAGE(.BOTH.,#273305); +#273305 = SURFACE_SIDE_STYLE('',(#273306,#273309)); +#273306 = SURFACE_STYLE_FILL_AREA(#273307); +#273307 = FILL_AREA_STYLE('',(#273308)); +#273308 = FILL_AREA_STYLE_COLOUR('',#272831); +#273309 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273310)); +#273310 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273311 = STYLED_ITEM('color',(#273312),#133583); +#273312 = PRESENTATION_STYLE_ASSIGNMENT((#273313)); +#273313 = SURFACE_STYLE_USAGE(.BOTH.,#273314); +#273314 = SURFACE_SIDE_STYLE('',(#273315,#273318)); +#273315 = SURFACE_STYLE_FILL_AREA(#273316); +#273316 = FILL_AREA_STYLE('',(#273317)); +#273317 = FILL_AREA_STYLE_COLOUR('',#272831); +#273318 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273319)); +#273319 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273320 = STYLED_ITEM('color',(#273321),#133855); +#273321 = PRESENTATION_STYLE_ASSIGNMENT((#273322)); +#273322 = SURFACE_STYLE_USAGE(.BOTH.,#273323); +#273323 = SURFACE_SIDE_STYLE('',(#273324,#273327)); +#273324 = SURFACE_STYLE_FILL_AREA(#273325); +#273325 = FILL_AREA_STYLE('',(#273326)); +#273326 = FILL_AREA_STYLE_COLOUR('',#272831); +#273327 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273328)); +#273328 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273329 = STYLED_ITEM('color',(#273330),#134039); +#273330 = PRESENTATION_STYLE_ASSIGNMENT((#273331)); +#273331 = SURFACE_STYLE_USAGE(.BOTH.,#273332); +#273332 = SURFACE_SIDE_STYLE('',(#273333,#273336)); +#273333 = SURFACE_STYLE_FILL_AREA(#273334); +#273334 = FILL_AREA_STYLE('',(#273335)); +#273335 = FILL_AREA_STYLE_COLOUR('',#272831); +#273336 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273337)); +#273337 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273338 = STYLED_ITEM('color',(#273339),#134124); +#273339 = PRESENTATION_STYLE_ASSIGNMENT((#273340)); +#273340 = SURFACE_STYLE_USAGE(.BOTH.,#273341); +#273341 = SURFACE_SIDE_STYLE('',(#273342,#273345)); +#273342 = SURFACE_STYLE_FILL_AREA(#273343); +#273343 = FILL_AREA_STYLE('',(#273344)); +#273344 = FILL_AREA_STYLE_COLOUR('',#272831); +#273345 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273346)); +#273346 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273347 = STYLED_ITEM('color',(#273348),#134318); +#273348 = PRESENTATION_STYLE_ASSIGNMENT((#273349)); +#273349 = SURFACE_STYLE_USAGE(.BOTH.,#273350); +#273350 = SURFACE_SIDE_STYLE('',(#273351,#273354)); +#273351 = SURFACE_STYLE_FILL_AREA(#273352); +#273352 = FILL_AREA_STYLE('',(#273353)); +#273353 = FILL_AREA_STYLE_COLOUR('',#272831); +#273354 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273355)); +#273355 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273356 = STYLED_ITEM('color',(#273357),#134362); +#273357 = PRESENTATION_STYLE_ASSIGNMENT((#273358)); +#273358 = SURFACE_STYLE_USAGE(.BOTH.,#273359); +#273359 = SURFACE_SIDE_STYLE('',(#273360,#273363)); +#273360 = SURFACE_STYLE_FILL_AREA(#273361); +#273361 = FILL_AREA_STYLE('',(#273362)); +#273362 = FILL_AREA_STYLE_COLOUR('',#272831); +#273363 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273364)); +#273364 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273365 = STYLED_ITEM('color',(#273366),#134514); +#273366 = PRESENTATION_STYLE_ASSIGNMENT((#273367)); +#273367 = SURFACE_STYLE_USAGE(.BOTH.,#273368); +#273368 = SURFACE_SIDE_STYLE('',(#273369,#273372)); +#273369 = SURFACE_STYLE_FILL_AREA(#273370); +#273370 = FILL_AREA_STYLE('',(#273371)); +#273371 = FILL_AREA_STYLE_COLOUR('',#272831); +#273372 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273373)); +#273373 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273374 = STYLED_ITEM('color',(#273375),#134608); +#273375 = PRESENTATION_STYLE_ASSIGNMENT((#273376)); +#273376 = SURFACE_STYLE_USAGE(.BOTH.,#273377); +#273377 = SURFACE_SIDE_STYLE('',(#273378,#273381)); +#273378 = SURFACE_STYLE_FILL_AREA(#273379); +#273379 = FILL_AREA_STYLE('',(#273380)); +#273380 = FILL_AREA_STYLE_COLOUR('',#272831); +#273381 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273382)); +#273382 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273383 = STYLED_ITEM('color',(#273384),#134844); +#273384 = PRESENTATION_STYLE_ASSIGNMENT((#273385)); +#273385 = SURFACE_STYLE_USAGE(.BOTH.,#273386); +#273386 = SURFACE_SIDE_STYLE('',(#273387,#273390)); +#273387 = SURFACE_STYLE_FILL_AREA(#273388); +#273388 = FILL_AREA_STYLE('',(#273389)); +#273389 = FILL_AREA_STYLE_COLOUR('',#272831); +#273390 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273391)); +#273391 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273392 = STYLED_ITEM('color',(#273393),#134986); +#273393 = PRESENTATION_STYLE_ASSIGNMENT((#273394)); +#273394 = SURFACE_STYLE_USAGE(.BOTH.,#273395); +#273395 = SURFACE_SIDE_STYLE('',(#273396,#273399)); +#273396 = SURFACE_STYLE_FILL_AREA(#273397); +#273397 = FILL_AREA_STYLE('',(#273398)); +#273398 = FILL_AREA_STYLE_COLOUR('',#272831); +#273399 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273400)); +#273400 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273401 = STYLED_ITEM('color',(#273402),#135164); +#273402 = PRESENTATION_STYLE_ASSIGNMENT((#273403)); +#273403 = SURFACE_STYLE_USAGE(.BOTH.,#273404); +#273404 = SURFACE_SIDE_STYLE('',(#273405,#273408)); +#273405 = SURFACE_STYLE_FILL_AREA(#273406); +#273406 = FILL_AREA_STYLE('',(#273407)); +#273407 = FILL_AREA_STYLE_COLOUR('',#272831); +#273408 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273409)); +#273409 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273410 = STYLED_ITEM('color',(#273411),#135342); +#273411 = PRESENTATION_STYLE_ASSIGNMENT((#273412)); +#273412 = SURFACE_STYLE_USAGE(.BOTH.,#273413); +#273413 = SURFACE_SIDE_STYLE('',(#273414,#273417)); +#273414 = SURFACE_STYLE_FILL_AREA(#273415); +#273415 = FILL_AREA_STYLE('',(#273416)); +#273416 = FILL_AREA_STYLE_COLOUR('',#272831); +#273417 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273418)); +#273418 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273419 = STYLED_ITEM('color',(#273420),#135483); +#273420 = PRESENTATION_STYLE_ASSIGNMENT((#273421)); +#273421 = SURFACE_STYLE_USAGE(.BOTH.,#273422); +#273422 = SURFACE_SIDE_STYLE('',(#273423,#273426)); +#273423 = SURFACE_STYLE_FILL_AREA(#273424); +#273424 = FILL_AREA_STYLE('',(#273425)); +#273425 = FILL_AREA_STYLE_COLOUR('',#272831); +#273426 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273427)); +#273427 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273428 = STYLED_ITEM('color',(#273429),#135627); +#273429 = PRESENTATION_STYLE_ASSIGNMENT((#273430)); +#273430 = SURFACE_STYLE_USAGE(.BOTH.,#273431); +#273431 = SURFACE_SIDE_STYLE('',(#273432,#273435)); +#273432 = SURFACE_STYLE_FILL_AREA(#273433); +#273433 = FILL_AREA_STYLE('',(#273434)); +#273434 = FILL_AREA_STYLE_COLOUR('',#272831); +#273435 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273436)); +#273436 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273437 = STYLED_ITEM('color',(#273438),#135771); +#273438 = PRESENTATION_STYLE_ASSIGNMENT((#273439)); +#273439 = SURFACE_STYLE_USAGE(.BOTH.,#273440); +#273440 = SURFACE_SIDE_STYLE('',(#273441,#273444)); +#273441 = SURFACE_STYLE_FILL_AREA(#273442); +#273442 = FILL_AREA_STYLE('',(#273443)); +#273443 = FILL_AREA_STYLE_COLOUR('',#272831); +#273444 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273445)); +#273445 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273446 = STYLED_ITEM('color',(#273447),#135823); +#273447 = PRESENTATION_STYLE_ASSIGNMENT((#273448)); +#273448 = SURFACE_STYLE_USAGE(.BOTH.,#273449); +#273449 = SURFACE_SIDE_STYLE('',(#273450,#273453)); +#273450 = SURFACE_STYLE_FILL_AREA(#273451); +#273451 = FILL_AREA_STYLE('',(#273452)); +#273452 = FILL_AREA_STYLE_COLOUR('',#272831); +#273453 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273454)); +#273454 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273455 = STYLED_ITEM('color',(#273456),#135875); +#273456 = PRESENTATION_STYLE_ASSIGNMENT((#273457)); +#273457 = SURFACE_STYLE_USAGE(.BOTH.,#273458); +#273458 = SURFACE_SIDE_STYLE('',(#273459,#273462)); +#273459 = SURFACE_STYLE_FILL_AREA(#273460); +#273460 = FILL_AREA_STYLE('',(#273461)); +#273461 = FILL_AREA_STYLE_COLOUR('',#272831); +#273462 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273463)); +#273463 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273464 = STYLED_ITEM('color',(#273465),#135927); +#273465 = PRESENTATION_STYLE_ASSIGNMENT((#273466)); +#273466 = SURFACE_STYLE_USAGE(.BOTH.,#273467); +#273467 = SURFACE_SIDE_STYLE('',(#273468,#273471)); +#273468 = SURFACE_STYLE_FILL_AREA(#273469); +#273469 = FILL_AREA_STYLE('',(#273470)); +#273470 = FILL_AREA_STYLE_COLOUR('',#272831); +#273471 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273472)); +#273472 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273473 = STYLED_ITEM('color',(#273474),#135979); +#273474 = PRESENTATION_STYLE_ASSIGNMENT((#273475)); +#273475 = SURFACE_STYLE_USAGE(.BOTH.,#273476); +#273476 = SURFACE_SIDE_STYLE('',(#273477,#273480)); +#273477 = SURFACE_STYLE_FILL_AREA(#273478); +#273478 = FILL_AREA_STYLE('',(#273479)); +#273479 = FILL_AREA_STYLE_COLOUR('',#272831); +#273480 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273481)); +#273481 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273482 = STYLED_ITEM('color',(#273483),#136123); +#273483 = PRESENTATION_STYLE_ASSIGNMENT((#273484)); +#273484 = SURFACE_STYLE_USAGE(.BOTH.,#273485); +#273485 = SURFACE_SIDE_STYLE('',(#273486,#273489)); +#273486 = SURFACE_STYLE_FILL_AREA(#273487); +#273487 = FILL_AREA_STYLE('',(#273488)); +#273488 = FILL_AREA_STYLE_COLOUR('',#272831); +#273489 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273490)); +#273490 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273491 = STYLED_ITEM('color',(#273492),#136267); +#273492 = PRESENTATION_STYLE_ASSIGNMENT((#273493)); +#273493 = SURFACE_STYLE_USAGE(.BOTH.,#273494); +#273494 = SURFACE_SIDE_STYLE('',(#273495,#273498)); +#273495 = SURFACE_STYLE_FILL_AREA(#273496); +#273496 = FILL_AREA_STYLE('',(#273497)); +#273497 = FILL_AREA_STYLE_COLOUR('',#272831); +#273498 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273499)); +#273499 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273500 = STYLED_ITEM('color',(#273501),#136344); +#273501 = PRESENTATION_STYLE_ASSIGNMENT((#273502)); +#273502 = SURFACE_STYLE_USAGE(.BOTH.,#273503); +#273503 = SURFACE_SIDE_STYLE('',(#273504,#273507)); +#273504 = SURFACE_STYLE_FILL_AREA(#273505); +#273505 = FILL_AREA_STYLE('',(#273506)); +#273506 = FILL_AREA_STYLE_COLOUR('',#272831); +#273507 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273508)); +#273508 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273509 = STYLED_ITEM('color',(#273510),#136429); +#273510 = PRESENTATION_STYLE_ASSIGNMENT((#273511)); +#273511 = SURFACE_STYLE_USAGE(.BOTH.,#273512); +#273512 = SURFACE_SIDE_STYLE('',(#273513,#273516)); +#273513 = SURFACE_STYLE_FILL_AREA(#273514); +#273514 = FILL_AREA_STYLE('',(#273515)); +#273515 = FILL_AREA_STYLE_COLOUR('',#272831); +#273516 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273517)); +#273517 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273518 = STYLED_ITEM('color',(#273519),#136498); +#273519 = PRESENTATION_STYLE_ASSIGNMENT((#273520)); +#273520 = SURFACE_STYLE_USAGE(.BOTH.,#273521); +#273521 = SURFACE_SIDE_STYLE('',(#273522,#273525)); +#273522 = SURFACE_STYLE_FILL_AREA(#273523); +#273523 = FILL_AREA_STYLE('',(#273524)); +#273524 = FILL_AREA_STYLE_COLOUR('',#272831); +#273525 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273526)); +#273526 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273527 = STYLED_ITEM('color',(#273528),#136946); +#273528 = PRESENTATION_STYLE_ASSIGNMENT((#273529)); +#273529 = SURFACE_STYLE_USAGE(.BOTH.,#273530); +#273530 = SURFACE_SIDE_STYLE('',(#273531,#273534)); +#273531 = SURFACE_STYLE_FILL_AREA(#273532); +#273532 = FILL_AREA_STYLE('',(#273533)); +#273533 = FILL_AREA_STYLE_COLOUR('',#272831); +#273534 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273535)); +#273535 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273536 = STYLED_ITEM('color',(#273537),#137129); +#273537 = PRESENTATION_STYLE_ASSIGNMENT((#273538)); +#273538 = SURFACE_STYLE_USAGE(.BOTH.,#273539); +#273539 = SURFACE_SIDE_STYLE('',(#273540,#273543)); +#273540 = SURFACE_STYLE_FILL_AREA(#273541); +#273541 = FILL_AREA_STYLE('',(#273542)); +#273542 = FILL_AREA_STYLE_COLOUR('',#272831); +#273543 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273544)); +#273544 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273545 = STYLED_ITEM('color',(#273546),#137271); +#273546 = PRESENTATION_STYLE_ASSIGNMENT((#273547)); +#273547 = SURFACE_STYLE_USAGE(.BOTH.,#273548); +#273548 = SURFACE_SIDE_STYLE('',(#273549,#273552)); +#273549 = SURFACE_STYLE_FILL_AREA(#273550); +#273550 = FILL_AREA_STYLE('',(#273551)); +#273551 = FILL_AREA_STYLE_COLOUR('',#272831); +#273552 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273553)); +#273553 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273554 = STYLED_ITEM('color',(#273555),#137395); +#273555 = PRESENTATION_STYLE_ASSIGNMENT((#273556)); +#273556 = SURFACE_STYLE_USAGE(.BOTH.,#273557); +#273557 = SURFACE_SIDE_STYLE('',(#273558,#273561)); +#273558 = SURFACE_STYLE_FILL_AREA(#273559); +#273559 = FILL_AREA_STYLE('',(#273560)); +#273560 = FILL_AREA_STYLE_COLOUR('',#272831); +#273561 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273562)); +#273562 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273563 = STYLED_ITEM('color',(#273564),#137547); +#273564 = PRESENTATION_STYLE_ASSIGNMENT((#273565)); +#273565 = SURFACE_STYLE_USAGE(.BOTH.,#273566); +#273566 = SURFACE_SIDE_STYLE('',(#273567,#273570)); +#273567 = SURFACE_STYLE_FILL_AREA(#273568); +#273568 = FILL_AREA_STYLE('',(#273569)); +#273569 = FILL_AREA_STYLE_COLOUR('',#272831); +#273570 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273571)); +#273571 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273572 = STYLED_ITEM('color',(#273573),#137680); +#273573 = PRESENTATION_STYLE_ASSIGNMENT((#273574)); +#273574 = SURFACE_STYLE_USAGE(.BOTH.,#273575); +#273575 = SURFACE_SIDE_STYLE('',(#273576,#273579)); +#273576 = SURFACE_STYLE_FILL_AREA(#273577); +#273577 = FILL_AREA_STYLE('',(#273578)); +#273578 = FILL_AREA_STYLE_COLOUR('',#272831); +#273579 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273580)); +#273580 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273581 = STYLED_ITEM('color',(#273582),#137798); +#273582 = PRESENTATION_STYLE_ASSIGNMENT((#273583)); +#273583 = SURFACE_STYLE_USAGE(.BOTH.,#273584); +#273584 = SURFACE_SIDE_STYLE('',(#273585,#273588)); +#273585 = SURFACE_STYLE_FILL_AREA(#273586); +#273586 = FILL_AREA_STYLE('',(#273587)); +#273587 = FILL_AREA_STYLE_COLOUR('',#272831); +#273588 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273589)); +#273589 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273590 = STYLED_ITEM('color',(#273591),#137926); +#273591 = PRESENTATION_STYLE_ASSIGNMENT((#273592)); +#273592 = SURFACE_STYLE_USAGE(.BOTH.,#273593); +#273593 = SURFACE_SIDE_STYLE('',(#273594,#273597)); +#273594 = SURFACE_STYLE_FILL_AREA(#273595); +#273595 = FILL_AREA_STYLE('',(#273596)); +#273596 = FILL_AREA_STYLE_COLOUR('',#272831); +#273597 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273598)); +#273598 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273599 = STYLED_ITEM('color',(#273600),#138120); +#273600 = PRESENTATION_STYLE_ASSIGNMENT((#273601)); +#273601 = SURFACE_STYLE_USAGE(.BOTH.,#273602); +#273602 = SURFACE_SIDE_STYLE('',(#273603,#273606)); +#273603 = SURFACE_STYLE_FILL_AREA(#273604); +#273604 = FILL_AREA_STYLE('',(#273605)); +#273605 = FILL_AREA_STYLE_COLOUR('',#272831); +#273606 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273607)); +#273607 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273608 = STYLED_ITEM('color',(#273609),#138262); +#273609 = PRESENTATION_STYLE_ASSIGNMENT((#273610)); +#273610 = SURFACE_STYLE_USAGE(.BOTH.,#273611); +#273611 = SURFACE_SIDE_STYLE('',(#273612,#273615)); +#273612 = SURFACE_STYLE_FILL_AREA(#273613); +#273613 = FILL_AREA_STYLE('',(#273614)); +#273614 = FILL_AREA_STYLE_COLOUR('',#272831); +#273615 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273616)); +#273616 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273617 = STYLED_ITEM('color',(#273618),#138390); +#273618 = PRESENTATION_STYLE_ASSIGNMENT((#273619)); +#273619 = SURFACE_STYLE_USAGE(.BOTH.,#273620); +#273620 = SURFACE_SIDE_STYLE('',(#273621,#273624)); +#273621 = SURFACE_STYLE_FILL_AREA(#273622); +#273622 = FILL_AREA_STYLE('',(#273623)); +#273623 = FILL_AREA_STYLE_COLOUR('',#272831); +#273624 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273625)); +#273625 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273626 = STYLED_ITEM('color',(#273627),#138533); +#273627 = PRESENTATION_STYLE_ASSIGNMENT((#273628)); +#273628 = SURFACE_STYLE_USAGE(.BOTH.,#273629); +#273629 = SURFACE_SIDE_STYLE('',(#273630,#273633)); +#273630 = SURFACE_STYLE_FILL_AREA(#273631); +#273631 = FILL_AREA_STYLE('',(#273632)); +#273632 = FILL_AREA_STYLE_COLOUR('',#272831); +#273633 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273634)); +#273634 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273635 = STYLED_ITEM('color',(#273636),#138830); +#273636 = PRESENTATION_STYLE_ASSIGNMENT((#273637)); +#273637 = SURFACE_STYLE_USAGE(.BOTH.,#273638); +#273638 = SURFACE_SIDE_STYLE('',(#273639,#273642)); +#273639 = SURFACE_STYLE_FILL_AREA(#273640); +#273640 = FILL_AREA_STYLE('',(#273641)); +#273641 = FILL_AREA_STYLE_COLOUR('',#272831); +#273642 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273643)); +#273643 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273644 = STYLED_ITEM('color',(#273645),#139013); +#273645 = PRESENTATION_STYLE_ASSIGNMENT((#273646)); +#273646 = SURFACE_STYLE_USAGE(.BOTH.,#273647); +#273647 = SURFACE_SIDE_STYLE('',(#273648,#273651)); +#273648 = SURFACE_STYLE_FILL_AREA(#273649); +#273649 = FILL_AREA_STYLE('',(#273650)); +#273650 = FILL_AREA_STYLE_COLOUR('',#272831); +#273651 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273652)); +#273652 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273653 = STYLED_ITEM('color',(#273654),#139057); +#273654 = PRESENTATION_STYLE_ASSIGNMENT((#273655)); +#273655 = SURFACE_STYLE_USAGE(.BOTH.,#273656); +#273656 = SURFACE_SIDE_STYLE('',(#273657,#273660)); +#273657 = SURFACE_STYLE_FILL_AREA(#273658); +#273658 = FILL_AREA_STYLE('',(#273659)); +#273659 = FILL_AREA_STYLE_COLOUR('',#272831); +#273660 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273661)); +#273661 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273662 = STYLED_ITEM('color',(#273663),#139199); +#273663 = PRESENTATION_STYLE_ASSIGNMENT((#273664)); +#273664 = SURFACE_STYLE_USAGE(.BOTH.,#273665); +#273665 = SURFACE_SIDE_STYLE('',(#273666,#273669)); +#273666 = SURFACE_STYLE_FILL_AREA(#273667); +#273667 = FILL_AREA_STYLE('',(#273668)); +#273668 = FILL_AREA_STYLE_COLOUR('',#272831); +#273669 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273670)); +#273670 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273671 = STYLED_ITEM('color',(#273672),#139406); +#273672 = PRESENTATION_STYLE_ASSIGNMENT((#273673)); +#273673 = SURFACE_STYLE_USAGE(.BOTH.,#273674); +#273674 = SURFACE_SIDE_STYLE('',(#273675,#273678)); +#273675 = SURFACE_STYLE_FILL_AREA(#273676); +#273676 = FILL_AREA_STYLE('',(#273677)); +#273677 = FILL_AREA_STYLE_COLOUR('',#272831); +#273678 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273679)); +#273679 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273680 = STYLED_ITEM('color',(#273681),#139450); +#273681 = PRESENTATION_STYLE_ASSIGNMENT((#273682)); +#273682 = SURFACE_STYLE_USAGE(.BOTH.,#273683); +#273683 = SURFACE_SIDE_STYLE('',(#273684,#273687)); +#273684 = SURFACE_STYLE_FILL_AREA(#273685); +#273685 = FILL_AREA_STYLE('',(#273686)); +#273686 = FILL_AREA_STYLE_COLOUR('',#272831); +#273687 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273688)); +#273688 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273689 = STYLED_ITEM('color',(#273690),#139643); +#273690 = PRESENTATION_STYLE_ASSIGNMENT((#273691)); +#273691 = SURFACE_STYLE_USAGE(.BOTH.,#273692); +#273692 = SURFACE_SIDE_STYLE('',(#273693,#273696)); +#273693 = SURFACE_STYLE_FILL_AREA(#273694); +#273694 = FILL_AREA_STYLE('',(#273695)); +#273695 = FILL_AREA_STYLE_COLOUR('',#272831); +#273696 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273697)); +#273697 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273698 = STYLED_ITEM('color',(#273699),#139786); +#273699 = PRESENTATION_STYLE_ASSIGNMENT((#273700)); +#273700 = SURFACE_STYLE_USAGE(.BOTH.,#273701); +#273701 = SURFACE_SIDE_STYLE('',(#273702,#273705)); +#273702 = SURFACE_STYLE_FILL_AREA(#273703); +#273703 = FILL_AREA_STYLE('',(#273704)); +#273704 = FILL_AREA_STYLE_COLOUR('',#272831); +#273705 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273706)); +#273706 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273707 = STYLED_ITEM('color',(#273708),#139980); +#273708 = PRESENTATION_STYLE_ASSIGNMENT((#273709)); +#273709 = SURFACE_STYLE_USAGE(.BOTH.,#273710); +#273710 = SURFACE_SIDE_STYLE('',(#273711,#273714)); +#273711 = SURFACE_STYLE_FILL_AREA(#273712); +#273712 = FILL_AREA_STYLE('',(#273713)); +#273713 = FILL_AREA_STYLE_COLOUR('',#272831); +#273714 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273715)); +#273715 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273716 = STYLED_ITEM('color',(#273717),#140048); +#273717 = PRESENTATION_STYLE_ASSIGNMENT((#273718)); +#273718 = SURFACE_STYLE_USAGE(.BOTH.,#273719); +#273719 = SURFACE_SIDE_STYLE('',(#273720,#273723)); +#273720 = SURFACE_STYLE_FILL_AREA(#273721); +#273721 = FILL_AREA_STYLE('',(#273722)); +#273722 = FILL_AREA_STYLE_COLOUR('',#272831); +#273723 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273724)); +#273724 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273725 = STYLED_ITEM('color',(#273726),#140126); +#273726 = PRESENTATION_STYLE_ASSIGNMENT((#273727)); +#273727 = SURFACE_STYLE_USAGE(.BOTH.,#273728); +#273728 = SURFACE_SIDE_STYLE('',(#273729,#273732)); +#273729 = SURFACE_STYLE_FILL_AREA(#273730); +#273730 = FILL_AREA_STYLE('',(#273731)); +#273731 = FILL_AREA_STYLE_COLOUR('',#272831); +#273732 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273733)); +#273733 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273734 = STYLED_ITEM('color',(#273735),#140170); +#273735 = PRESENTATION_STYLE_ASSIGNMENT((#273736)); +#273736 = SURFACE_STYLE_USAGE(.BOTH.,#273737); +#273737 = SURFACE_SIDE_STYLE('',(#273738,#273741)); +#273738 = SURFACE_STYLE_FILL_AREA(#273739); +#273739 = FILL_AREA_STYLE('',(#273740)); +#273740 = FILL_AREA_STYLE_COLOUR('',#272831); +#273741 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273742)); +#273742 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273743 = STYLED_ITEM('color',(#273744),#140264); +#273744 = PRESENTATION_STYLE_ASSIGNMENT((#273745)); +#273745 = SURFACE_STYLE_USAGE(.BOTH.,#273746); +#273746 = SURFACE_SIDE_STYLE('',(#273747,#273750)); +#273747 = SURFACE_STYLE_FILL_AREA(#273748); +#273748 = FILL_AREA_STYLE('',(#273749)); +#273749 = FILL_AREA_STYLE_COLOUR('',#272831); +#273750 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273751)); +#273751 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273752 = STYLED_ITEM('color',(#273753),#140308); +#273753 = PRESENTATION_STYLE_ASSIGNMENT((#273754)); +#273754 = SURFACE_STYLE_USAGE(.BOTH.,#273755); +#273755 = SURFACE_SIDE_STYLE('',(#273756,#273759)); +#273756 = SURFACE_STYLE_FILL_AREA(#273757); +#273757 = FILL_AREA_STYLE('',(#273758)); +#273758 = FILL_AREA_STYLE_COLOUR('',#272831); +#273759 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273760)); +#273760 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273761 = STYLED_ITEM('color',(#273762),#140352); +#273762 = PRESENTATION_STYLE_ASSIGNMENT((#273763)); +#273763 = SURFACE_STYLE_USAGE(.BOTH.,#273764); +#273764 = SURFACE_SIDE_STYLE('',(#273765,#273768)); +#273765 = SURFACE_STYLE_FILL_AREA(#273766); +#273766 = FILL_AREA_STYLE('',(#273767)); +#273767 = FILL_AREA_STYLE_COLOUR('',#272831); +#273768 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273769)); +#273769 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273770 = STYLED_ITEM('color',(#273771),#140396); +#273771 = PRESENTATION_STYLE_ASSIGNMENT((#273772)); +#273772 = SURFACE_STYLE_USAGE(.BOTH.,#273773); +#273773 = SURFACE_SIDE_STYLE('',(#273774,#273777)); +#273774 = SURFACE_STYLE_FILL_AREA(#273775); +#273775 = FILL_AREA_STYLE('',(#273776)); +#273776 = FILL_AREA_STYLE_COLOUR('',#272831); +#273777 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273778)); +#273778 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273779 = STYLED_ITEM('color',(#273780),#140440); +#273780 = PRESENTATION_STYLE_ASSIGNMENT((#273781)); +#273781 = SURFACE_STYLE_USAGE(.BOTH.,#273782); +#273782 = SURFACE_SIDE_STYLE('',(#273783,#273786)); +#273783 = SURFACE_STYLE_FILL_AREA(#273784); +#273784 = FILL_AREA_STYLE('',(#273785)); +#273785 = FILL_AREA_STYLE_COLOUR('',#272831); +#273786 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273787)); +#273787 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273788 = STYLED_ITEM('color',(#273789),#140508); +#273789 = PRESENTATION_STYLE_ASSIGNMENT((#273790)); +#273790 = SURFACE_STYLE_USAGE(.BOTH.,#273791); +#273791 = SURFACE_SIDE_STYLE('',(#273792,#273795)); +#273792 = SURFACE_STYLE_FILL_AREA(#273793); +#273793 = FILL_AREA_STYLE('',(#273794)); +#273794 = FILL_AREA_STYLE_COLOUR('',#272831); +#273795 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273796)); +#273796 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273797 = STYLED_ITEM('color',(#273798),#140577); +#273798 = PRESENTATION_STYLE_ASSIGNMENT((#273799)); +#273799 = SURFACE_STYLE_USAGE(.BOTH.,#273800); +#273800 = SURFACE_SIDE_STYLE('',(#273801,#273804)); +#273801 = SURFACE_STYLE_FILL_AREA(#273802); +#273802 = FILL_AREA_STYLE('',(#273803)); +#273803 = FILL_AREA_STYLE_COLOUR('',#272831); +#273804 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273805)); +#273805 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273806 = STYLED_ITEM('color',(#273807),#140705); +#273807 = PRESENTATION_STYLE_ASSIGNMENT((#273808)); +#273808 = SURFACE_STYLE_USAGE(.BOTH.,#273809); +#273809 = SURFACE_SIDE_STYLE('',(#273810,#273813)); +#273810 = SURFACE_STYLE_FILL_AREA(#273811); +#273811 = FILL_AREA_STYLE('',(#273812)); +#273812 = FILL_AREA_STYLE_COLOUR('',#272831); +#273813 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273814)); +#273814 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273815 = STYLED_ITEM('color',(#273816),#140772); +#273816 = PRESENTATION_STYLE_ASSIGNMENT((#273817)); +#273817 = SURFACE_STYLE_USAGE(.BOTH.,#273818); +#273818 = SURFACE_SIDE_STYLE('',(#273819,#273822)); +#273819 = SURFACE_STYLE_FILL_AREA(#273820); +#273820 = FILL_AREA_STYLE('',(#273821)); +#273821 = FILL_AREA_STYLE_COLOUR('',#272831); +#273822 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273823)); +#273823 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273824 = STYLED_ITEM('color',(#273825),#140898); +#273825 = PRESENTATION_STYLE_ASSIGNMENT((#273826)); +#273826 = SURFACE_STYLE_USAGE(.BOTH.,#273827); +#273827 = SURFACE_SIDE_STYLE('',(#273828,#273831)); +#273828 = SURFACE_STYLE_FILL_AREA(#273829); +#273829 = FILL_AREA_STYLE('',(#273830)); +#273830 = FILL_AREA_STYLE_COLOUR('',#272831); +#273831 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273832)); +#273832 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273833 = STYLED_ITEM('color',(#273834),#140942); +#273834 = PRESENTATION_STYLE_ASSIGNMENT((#273835)); +#273835 = SURFACE_STYLE_USAGE(.BOTH.,#273836); +#273836 = SURFACE_SIDE_STYLE('',(#273837,#273840)); +#273837 = SURFACE_STYLE_FILL_AREA(#273838); +#273838 = FILL_AREA_STYLE('',(#273839)); +#273839 = FILL_AREA_STYLE_COLOUR('',#272831); +#273840 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273841)); +#273841 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273842 = STYLED_ITEM('color',(#273843),#140986); +#273843 = PRESENTATION_STYLE_ASSIGNMENT((#273844)); +#273844 = SURFACE_STYLE_USAGE(.BOTH.,#273845); +#273845 = SURFACE_SIDE_STYLE('',(#273846,#273849)); +#273846 = SURFACE_STYLE_FILL_AREA(#273847); +#273847 = FILL_AREA_STYLE('',(#273848)); +#273848 = FILL_AREA_STYLE_COLOUR('',#272831); +#273849 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273850)); +#273850 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273851 = STYLED_ITEM('color',(#273852),#141030); +#273852 = PRESENTATION_STYLE_ASSIGNMENT((#273853)); +#273853 = SURFACE_STYLE_USAGE(.BOTH.,#273854); +#273854 = SURFACE_SIDE_STYLE('',(#273855,#273858)); +#273855 = SURFACE_STYLE_FILL_AREA(#273856); +#273856 = FILL_AREA_STYLE('',(#273857)); +#273857 = FILL_AREA_STYLE_COLOUR('',#272831); +#273858 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273859)); +#273859 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273860 = STYLED_ITEM('color',(#273861),#141208); +#273861 = PRESENTATION_STYLE_ASSIGNMENT((#273862)); +#273862 = SURFACE_STYLE_USAGE(.BOTH.,#273863); +#273863 = SURFACE_SIDE_STYLE('',(#273864,#273867)); +#273864 = SURFACE_STYLE_FILL_AREA(#273865); +#273865 = FILL_AREA_STYLE('',(#273866)); +#273866 = FILL_AREA_STYLE_COLOUR('',#272831); +#273867 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273868)); +#273868 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273869 = STYLED_ITEM('color',(#273870),#141276); +#273870 = PRESENTATION_STYLE_ASSIGNMENT((#273871)); +#273871 = SURFACE_STYLE_USAGE(.BOTH.,#273872); +#273872 = SURFACE_SIDE_STYLE('',(#273873,#273876)); +#273873 = SURFACE_STYLE_FILL_AREA(#273874); +#273874 = FILL_AREA_STYLE('',(#273875)); +#273875 = FILL_AREA_STYLE_COLOUR('',#272831); +#273876 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273877)); +#273877 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273878 = STYLED_ITEM('color',(#273879),#141443); +#273879 = PRESENTATION_STYLE_ASSIGNMENT((#273880)); +#273880 = SURFACE_STYLE_USAGE(.BOTH.,#273881); +#273881 = SURFACE_SIDE_STYLE('',(#273882,#273885)); +#273882 = SURFACE_STYLE_FILL_AREA(#273883); +#273883 = FILL_AREA_STYLE('',(#273884)); +#273884 = FILL_AREA_STYLE_COLOUR('',#272831); +#273885 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273886)); +#273886 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273887 = STYLED_ITEM('color',(#273888),#141614); +#273888 = PRESENTATION_STYLE_ASSIGNMENT((#273889)); +#273889 = SURFACE_STYLE_USAGE(.BOTH.,#273890); +#273890 = SURFACE_SIDE_STYLE('',(#273891,#273894)); +#273891 = SURFACE_STYLE_FILL_AREA(#273892); +#273892 = FILL_AREA_STYLE('',(#273893)); +#273893 = FILL_AREA_STYLE_COLOUR('',#272831); +#273894 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273895)); +#273895 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273896 = STYLED_ITEM('color',(#273897),#141807); +#273897 = PRESENTATION_STYLE_ASSIGNMENT((#273898)); +#273898 = SURFACE_STYLE_USAGE(.BOTH.,#273899); +#273899 = SURFACE_SIDE_STYLE('',(#273900,#273903)); +#273900 = SURFACE_STYLE_FILL_AREA(#273901); +#273901 = FILL_AREA_STYLE('',(#273902)); +#273902 = FILL_AREA_STYLE_COLOUR('',#272831); +#273903 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273904)); +#273904 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273905 = STYLED_ITEM('color',(#273906),#142000); +#273906 = PRESENTATION_STYLE_ASSIGNMENT((#273907)); +#273907 = SURFACE_STYLE_USAGE(.BOTH.,#273908); +#273908 = SURFACE_SIDE_STYLE('',(#273909,#273912)); +#273909 = SURFACE_STYLE_FILL_AREA(#273910); +#273910 = FILL_AREA_STYLE('',(#273911)); +#273911 = FILL_AREA_STYLE_COLOUR('',#272831); +#273912 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273913)); +#273913 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273914 = STYLED_ITEM('color',(#273915),#142069); +#273915 = PRESENTATION_STYLE_ASSIGNMENT((#273916)); +#273916 = SURFACE_STYLE_USAGE(.BOTH.,#273917); +#273917 = SURFACE_SIDE_STYLE('',(#273918,#273921)); +#273918 = SURFACE_STYLE_FILL_AREA(#273919); +#273919 = FILL_AREA_STYLE('',(#273920)); +#273920 = FILL_AREA_STYLE_COLOUR('',#272831); +#273921 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273922)); +#273922 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273923 = STYLED_ITEM('color',(#273924),#142272); +#273924 = PRESENTATION_STYLE_ASSIGNMENT((#273925)); +#273925 = SURFACE_STYLE_USAGE(.BOTH.,#273926); +#273926 = SURFACE_SIDE_STYLE('',(#273927,#273930)); +#273927 = SURFACE_STYLE_FILL_AREA(#273928); +#273928 = FILL_AREA_STYLE('',(#273929)); +#273929 = FILL_AREA_STYLE_COLOUR('',#272831); +#273930 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273931)); +#273931 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273932 = STYLED_ITEM('color',(#273933),#142424); +#273933 = PRESENTATION_STYLE_ASSIGNMENT((#273934)); +#273934 = SURFACE_STYLE_USAGE(.BOTH.,#273935); +#273935 = SURFACE_SIDE_STYLE('',(#273936,#273939)); +#273936 = SURFACE_STYLE_FILL_AREA(#273937); +#273937 = FILL_AREA_STYLE('',(#273938)); +#273938 = FILL_AREA_STYLE_COLOUR('',#272831); +#273939 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273940)); +#273940 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273941 = STYLED_ITEM('color',(#273942),#142586); +#273942 = PRESENTATION_STYLE_ASSIGNMENT((#273943)); +#273943 = SURFACE_STYLE_USAGE(.BOTH.,#273944); +#273944 = SURFACE_SIDE_STYLE('',(#273945,#273948)); +#273945 = SURFACE_STYLE_FILL_AREA(#273946); +#273946 = FILL_AREA_STYLE('',(#273947)); +#273947 = FILL_AREA_STYLE_COLOUR('',#272831); +#273948 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273949)); +#273949 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273950 = STYLED_ITEM('color',(#273951),#142811); +#273951 = PRESENTATION_STYLE_ASSIGNMENT((#273952)); +#273952 = SURFACE_STYLE_USAGE(.BOTH.,#273953); +#273953 = SURFACE_SIDE_STYLE('',(#273954,#273957)); +#273954 = SURFACE_STYLE_FILL_AREA(#273955); +#273955 = FILL_AREA_STYLE('',(#273956)); +#273956 = FILL_AREA_STYLE_COLOUR('',#272831); +#273957 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273958)); +#273958 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273959 = STYLED_ITEM('color',(#273960),#142855); +#273960 = PRESENTATION_STYLE_ASSIGNMENT((#273961)); +#273961 = SURFACE_STYLE_USAGE(.BOTH.,#273962); +#273962 = SURFACE_SIDE_STYLE('',(#273963,#273966)); +#273963 = SURFACE_STYLE_FILL_AREA(#273964); +#273964 = FILL_AREA_STYLE('',(#273965)); +#273965 = FILL_AREA_STYLE_COLOUR('',#272831); +#273966 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273967)); +#273967 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273968 = STYLED_ITEM('color',(#273969),#142957); +#273969 = PRESENTATION_STYLE_ASSIGNMENT((#273970)); +#273970 = SURFACE_STYLE_USAGE(.BOTH.,#273971); +#273971 = SURFACE_SIDE_STYLE('',(#273972,#273975)); +#273972 = SURFACE_STYLE_FILL_AREA(#273973); +#273973 = FILL_AREA_STYLE('',(#273974)); +#273974 = FILL_AREA_STYLE_COLOUR('',#272831); +#273975 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273976)); +#273976 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273977 = STYLED_ITEM('color',(#273978),#143001); +#273978 = PRESENTATION_STYLE_ASSIGNMENT((#273979)); +#273979 = SURFACE_STYLE_USAGE(.BOTH.,#273980); +#273980 = SURFACE_SIDE_STYLE('',(#273981,#273984)); +#273981 = SURFACE_STYLE_FILL_AREA(#273982); +#273982 = FILL_AREA_STYLE('',(#273983)); +#273983 = FILL_AREA_STYLE_COLOUR('',#272831); +#273984 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273985)); +#273985 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273986 = STYLED_ITEM('color',(#273987),#143179); +#273987 = PRESENTATION_STYLE_ASSIGNMENT((#273988)); +#273988 = SURFACE_STYLE_USAGE(.BOTH.,#273989); +#273989 = SURFACE_SIDE_STYLE('',(#273990,#273993)); +#273990 = SURFACE_STYLE_FILL_AREA(#273991); +#273991 = FILL_AREA_STYLE('',(#273992)); +#273992 = FILL_AREA_STYLE_COLOUR('',#272831); +#273993 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#273994)); +#273994 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#273995 = STYLED_ITEM('color',(#273996),#143231); +#273996 = PRESENTATION_STYLE_ASSIGNMENT((#273997)); +#273997 = SURFACE_STYLE_USAGE(.BOTH.,#273998); +#273998 = SURFACE_SIDE_STYLE('',(#273999,#274002)); +#273999 = SURFACE_STYLE_FILL_AREA(#274000); +#274000 = FILL_AREA_STYLE('',(#274001)); +#274001 = FILL_AREA_STYLE_COLOUR('',#272831); +#274002 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274003)); +#274003 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274004 = STYLED_ITEM('color',(#274005),#143398); +#274005 = PRESENTATION_STYLE_ASSIGNMENT((#274006)); +#274006 = SURFACE_STYLE_USAGE(.BOTH.,#274007); +#274007 = SURFACE_SIDE_STYLE('',(#274008,#274011)); +#274008 = SURFACE_STYLE_FILL_AREA(#274009); +#274009 = FILL_AREA_STYLE('',(#274010)); +#274010 = FILL_AREA_STYLE_COLOUR('',#272831); +#274011 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274012)); +#274012 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274013 = STYLED_ITEM('color',(#274014),#143591); +#274014 = PRESENTATION_STYLE_ASSIGNMENT((#274015)); +#274015 = SURFACE_STYLE_USAGE(.BOTH.,#274016); +#274016 = SURFACE_SIDE_STYLE('',(#274017,#274020)); +#274017 = SURFACE_STYLE_FILL_AREA(#274018); +#274018 = FILL_AREA_STYLE('',(#274019)); +#274019 = FILL_AREA_STYLE_COLOUR('',#272831); +#274020 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274021)); +#274021 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274022 = STYLED_ITEM('color',(#274023),#143743); +#274023 = PRESENTATION_STYLE_ASSIGNMENT((#274024)); +#274024 = SURFACE_STYLE_USAGE(.BOTH.,#274025); +#274025 = SURFACE_SIDE_STYLE('',(#274026,#274029)); +#274026 = SURFACE_STYLE_FILL_AREA(#274027); +#274027 = FILL_AREA_STYLE('',(#274028)); +#274028 = FILL_AREA_STYLE_COLOUR('',#272831); +#274029 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274030)); +#274030 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274031 = STYLED_ITEM('color',(#274032),#143905); +#274032 = PRESENTATION_STYLE_ASSIGNMENT((#274033)); +#274033 = SURFACE_STYLE_USAGE(.BOTH.,#274034); +#274034 = SURFACE_SIDE_STYLE('',(#274035,#274038)); +#274035 = SURFACE_STYLE_FILL_AREA(#274036); +#274036 = FILL_AREA_STYLE('',(#274037)); +#274037 = FILL_AREA_STYLE_COLOUR('',#272831); +#274038 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274039)); +#274039 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274040 = STYLED_ITEM('color',(#274041),#144130); +#274041 = PRESENTATION_STYLE_ASSIGNMENT((#274042)); +#274042 = SURFACE_STYLE_USAGE(.BOTH.,#274043); +#274043 = SURFACE_SIDE_STYLE('',(#274044,#274047)); +#274044 = SURFACE_STYLE_FILL_AREA(#274045); +#274045 = FILL_AREA_STYLE('',(#274046)); +#274046 = FILL_AREA_STYLE_COLOUR('',#272831); +#274047 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274048)); +#274048 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274049 = STYLED_ITEM('color',(#274050),#144174); +#274050 = PRESENTATION_STYLE_ASSIGNMENT((#274051)); +#274051 = SURFACE_STYLE_USAGE(.BOTH.,#274052); +#274052 = SURFACE_SIDE_STYLE('',(#274053,#274056)); +#274053 = SURFACE_STYLE_FILL_AREA(#274054); +#274054 = FILL_AREA_STYLE('',(#274055)); +#274055 = FILL_AREA_STYLE_COLOUR('',#272831); +#274056 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274057)); +#274057 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274058 = STYLED_ITEM('color',(#274059),#144218); +#274059 = PRESENTATION_STYLE_ASSIGNMENT((#274060)); +#274060 = SURFACE_STYLE_USAGE(.BOTH.,#274061); +#274061 = SURFACE_SIDE_STYLE('',(#274062,#274065)); +#274062 = SURFACE_STYLE_FILL_AREA(#274063); +#274063 = FILL_AREA_STYLE('',(#274064)); +#274064 = FILL_AREA_STYLE_COLOUR('',#272831); +#274065 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274066)); +#274066 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274067 = STYLED_ITEM('color',(#274068),#144262); +#274068 = PRESENTATION_STYLE_ASSIGNMENT((#274069)); +#274069 = SURFACE_STYLE_USAGE(.BOTH.,#274070); +#274070 = SURFACE_SIDE_STYLE('',(#274071,#274074)); +#274071 = SURFACE_STYLE_FILL_AREA(#274072); +#274072 = FILL_AREA_STYLE('',(#274073)); +#274073 = FILL_AREA_STYLE_COLOUR('',#272831); +#274074 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274075)); +#274075 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274076 = STYLED_ITEM('color',(#274077),#144306); +#274077 = PRESENTATION_STYLE_ASSIGNMENT((#274078)); +#274078 = SURFACE_STYLE_USAGE(.BOTH.,#274079); +#274079 = SURFACE_SIDE_STYLE('',(#274080,#274083)); +#274080 = SURFACE_STYLE_FILL_AREA(#274081); +#274081 = FILL_AREA_STYLE('',(#274082)); +#274082 = FILL_AREA_STYLE_COLOUR('',#272831); +#274083 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274084)); +#274084 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274085 = STYLED_ITEM('color',(#274086),#144350); +#274086 = PRESENTATION_STYLE_ASSIGNMENT((#274087)); +#274087 = SURFACE_STYLE_USAGE(.BOTH.,#274088); +#274088 = SURFACE_SIDE_STYLE('',(#274089,#274092)); +#274089 = SURFACE_STYLE_FILL_AREA(#274090); +#274090 = FILL_AREA_STYLE('',(#274091)); +#274091 = FILL_AREA_STYLE_COLOUR('',#272831); +#274092 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274093)); +#274093 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274094 = STYLED_ITEM('color',(#274095),#144394); +#274095 = PRESENTATION_STYLE_ASSIGNMENT((#274096)); +#274096 = SURFACE_STYLE_USAGE(.BOTH.,#274097); +#274097 = SURFACE_SIDE_STYLE('',(#274098,#274101)); +#274098 = SURFACE_STYLE_FILL_AREA(#274099); +#274099 = FILL_AREA_STYLE('',(#274100)); +#274100 = FILL_AREA_STYLE_COLOUR('',#272831); +#274101 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274102)); +#274102 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274103 = STYLED_ITEM('color',(#274104),#144438); +#274104 = PRESENTATION_STYLE_ASSIGNMENT((#274105)); +#274105 = SURFACE_STYLE_USAGE(.BOTH.,#274106); +#274106 = SURFACE_SIDE_STYLE('',(#274107,#274110)); +#274107 = SURFACE_STYLE_FILL_AREA(#274108); +#274108 = FILL_AREA_STYLE('',(#274109)); +#274109 = FILL_AREA_STYLE_COLOUR('',#272831); +#274110 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274111)); +#274111 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274112 = STYLED_ITEM('color',(#274113),#144482); +#274113 = PRESENTATION_STYLE_ASSIGNMENT((#274114)); +#274114 = SURFACE_STYLE_USAGE(.BOTH.,#274115); +#274115 = SURFACE_SIDE_STYLE('',(#274116,#274119)); +#274116 = SURFACE_STYLE_FILL_AREA(#274117); +#274117 = FILL_AREA_STYLE('',(#274118)); +#274118 = FILL_AREA_STYLE_COLOUR('',#272831); +#274119 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274120)); +#274120 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274121 = STYLED_ITEM('color',(#274122),#144526); +#274122 = PRESENTATION_STYLE_ASSIGNMENT((#274123)); +#274123 = SURFACE_STYLE_USAGE(.BOTH.,#274124); +#274124 = SURFACE_SIDE_STYLE('',(#274125,#274128)); +#274125 = SURFACE_STYLE_FILL_AREA(#274126); +#274126 = FILL_AREA_STYLE('',(#274127)); +#274127 = FILL_AREA_STYLE_COLOUR('',#272831); +#274128 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274129)); +#274129 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274130 = STYLED_ITEM('color',(#274131),#144570); +#274131 = PRESENTATION_STYLE_ASSIGNMENT((#274132)); +#274132 = SURFACE_STYLE_USAGE(.BOTH.,#274133); +#274133 = SURFACE_SIDE_STYLE('',(#274134,#274137)); +#274134 = SURFACE_STYLE_FILL_AREA(#274135); +#274135 = FILL_AREA_STYLE('',(#274136)); +#274136 = FILL_AREA_STYLE_COLOUR('',#272831); +#274137 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274138)); +#274138 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274139 = STYLED_ITEM('color',(#274140),#144614); +#274140 = PRESENTATION_STYLE_ASSIGNMENT((#274141)); +#274141 = SURFACE_STYLE_USAGE(.BOTH.,#274142); +#274142 = SURFACE_SIDE_STYLE('',(#274143,#274146)); +#274143 = SURFACE_STYLE_FILL_AREA(#274144); +#274144 = FILL_AREA_STYLE('',(#274145)); +#274145 = FILL_AREA_STYLE_COLOUR('',#272831); +#274146 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274147)); +#274147 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274148 = STYLED_ITEM('color',(#274149),#144658); +#274149 = PRESENTATION_STYLE_ASSIGNMENT((#274150)); +#274150 = SURFACE_STYLE_USAGE(.BOTH.,#274151); +#274151 = SURFACE_SIDE_STYLE('',(#274152,#274155)); +#274152 = SURFACE_STYLE_FILL_AREA(#274153); +#274153 = FILL_AREA_STYLE('',(#274154)); +#274154 = FILL_AREA_STYLE_COLOUR('',#272831); +#274155 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274156)); +#274156 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274157 = STYLED_ITEM('color',(#274158),#144702); +#274158 = PRESENTATION_STYLE_ASSIGNMENT((#274159)); +#274159 = SURFACE_STYLE_USAGE(.BOTH.,#274160); +#274160 = SURFACE_SIDE_STYLE('',(#274161,#274164)); +#274161 = SURFACE_STYLE_FILL_AREA(#274162); +#274162 = FILL_AREA_STYLE('',(#274163)); +#274163 = FILL_AREA_STYLE_COLOUR('',#272831); +#274164 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274165)); +#274165 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274166 = STYLED_ITEM('color',(#274167),#144812); +#274167 = PRESENTATION_STYLE_ASSIGNMENT((#274168)); +#274168 = SURFACE_STYLE_USAGE(.BOTH.,#274169); +#274169 = SURFACE_SIDE_STYLE('',(#274170,#274173)); +#274170 = SURFACE_STYLE_FILL_AREA(#274171); +#274171 = FILL_AREA_STYLE('',(#274172)); +#274172 = FILL_AREA_STYLE_COLOUR('',#272831); +#274173 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274174)); +#274174 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274175 = STYLED_ITEM('color',(#274176),#144856); +#274176 = PRESENTATION_STYLE_ASSIGNMENT((#274177)); +#274177 = SURFACE_STYLE_USAGE(.BOTH.,#274178); +#274178 = SURFACE_SIDE_STYLE('',(#274179,#274182)); +#274179 = SURFACE_STYLE_FILL_AREA(#274180); +#274180 = FILL_AREA_STYLE('',(#274181)); +#274181 = FILL_AREA_STYLE_COLOUR('',#272831); +#274182 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274183)); +#274183 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274184 = STYLED_ITEM('color',(#274185),#144900); +#274185 = PRESENTATION_STYLE_ASSIGNMENT((#274186)); +#274186 = SURFACE_STYLE_USAGE(.BOTH.,#274187); +#274187 = SURFACE_SIDE_STYLE('',(#274188,#274191)); +#274188 = SURFACE_STYLE_FILL_AREA(#274189); +#274189 = FILL_AREA_STYLE('',(#274190)); +#274190 = FILL_AREA_STYLE_COLOUR('',#272831); +#274191 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274192)); +#274192 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274193 = STYLED_ITEM('color',(#274194),#144944); +#274194 = PRESENTATION_STYLE_ASSIGNMENT((#274195)); +#274195 = SURFACE_STYLE_USAGE(.BOTH.,#274196); +#274196 = SURFACE_SIDE_STYLE('',(#274197,#274200)); +#274197 = SURFACE_STYLE_FILL_AREA(#274198); +#274198 = FILL_AREA_STYLE('',(#274199)); +#274199 = FILL_AREA_STYLE_COLOUR('',#272831); +#274200 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274201)); +#274201 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274202 = STYLED_ITEM('color',(#274203),#144988); +#274203 = PRESENTATION_STYLE_ASSIGNMENT((#274204)); +#274204 = SURFACE_STYLE_USAGE(.BOTH.,#274205); +#274205 = SURFACE_SIDE_STYLE('',(#274206,#274209)); +#274206 = SURFACE_STYLE_FILL_AREA(#274207); +#274207 = FILL_AREA_STYLE('',(#274208)); +#274208 = FILL_AREA_STYLE_COLOUR('',#272831); +#274209 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274210)); +#274210 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274211 = STYLED_ITEM('color',(#274212),#145055); +#274212 = PRESENTATION_STYLE_ASSIGNMENT((#274213)); +#274213 = SURFACE_STYLE_USAGE(.BOTH.,#274214); +#274214 = SURFACE_SIDE_STYLE('',(#274215,#274218)); +#274215 = SURFACE_STYLE_FILL_AREA(#274216); +#274216 = FILL_AREA_STYLE('',(#274217)); +#274217 = FILL_AREA_STYLE_COLOUR('',#272831); +#274218 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274219)); +#274219 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274220 = STYLED_ITEM('color',(#274221),#145099); +#274221 = PRESENTATION_STYLE_ASSIGNMENT((#274222)); +#274222 = SURFACE_STYLE_USAGE(.BOTH.,#274223); +#274223 = SURFACE_SIDE_STYLE('',(#274224,#274227)); +#274224 = SURFACE_STYLE_FILL_AREA(#274225); +#274225 = FILL_AREA_STYLE('',(#274226)); +#274226 = FILL_AREA_STYLE_COLOUR('',#272831); +#274227 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274228)); +#274228 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274229 = STYLED_ITEM('color',(#274230),#145143); +#274230 = PRESENTATION_STYLE_ASSIGNMENT((#274231)); +#274231 = SURFACE_STYLE_USAGE(.BOTH.,#274232); +#274232 = SURFACE_SIDE_STYLE('',(#274233,#274236)); +#274233 = SURFACE_STYLE_FILL_AREA(#274234); +#274234 = FILL_AREA_STYLE('',(#274235)); +#274235 = FILL_AREA_STYLE_COLOUR('',#272831); +#274236 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274237)); +#274237 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274238 = STYLED_ITEM('color',(#274239),#145187); +#274239 = PRESENTATION_STYLE_ASSIGNMENT((#274240)); +#274240 = SURFACE_STYLE_USAGE(.BOTH.,#274241); +#274241 = SURFACE_SIDE_STYLE('',(#274242,#274245)); +#274242 = SURFACE_STYLE_FILL_AREA(#274243); +#274243 = FILL_AREA_STYLE('',(#274244)); +#274244 = FILL_AREA_STYLE_COLOUR('',#272831); +#274245 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274246)); +#274246 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274247 = STYLED_ITEM('color',(#274248),#145231); +#274248 = PRESENTATION_STYLE_ASSIGNMENT((#274249)); +#274249 = SURFACE_STYLE_USAGE(.BOTH.,#274250); +#274250 = SURFACE_SIDE_STYLE('',(#274251,#274254)); +#274251 = SURFACE_STYLE_FILL_AREA(#274252); +#274252 = FILL_AREA_STYLE('',(#274253)); +#274253 = FILL_AREA_STYLE_COLOUR('',#272831); +#274254 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274255)); +#274255 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274256 = STYLED_ITEM('color',(#274257),#145275); +#274257 = PRESENTATION_STYLE_ASSIGNMENT((#274258)); +#274258 = SURFACE_STYLE_USAGE(.BOTH.,#274259); +#274259 = SURFACE_SIDE_STYLE('',(#274260,#274263)); +#274260 = SURFACE_STYLE_FILL_AREA(#274261); +#274261 = FILL_AREA_STYLE('',(#274262)); +#274262 = FILL_AREA_STYLE_COLOUR('',#272831); +#274263 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274264)); +#274264 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274265 = STYLED_ITEM('color',(#274266),#145319); +#274266 = PRESENTATION_STYLE_ASSIGNMENT((#274267)); +#274267 = SURFACE_STYLE_USAGE(.BOTH.,#274268); +#274268 = SURFACE_SIDE_STYLE('',(#274269,#274272)); +#274269 = SURFACE_STYLE_FILL_AREA(#274270); +#274270 = FILL_AREA_STYLE('',(#274271)); +#274271 = FILL_AREA_STYLE_COLOUR('',#272831); +#274272 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274273)); +#274273 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274274 = STYLED_ITEM('color',(#274275),#145363); +#274275 = PRESENTATION_STYLE_ASSIGNMENT((#274276)); +#274276 = SURFACE_STYLE_USAGE(.BOTH.,#274277); +#274277 = SURFACE_SIDE_STYLE('',(#274278,#274281)); +#274278 = SURFACE_STYLE_FILL_AREA(#274279); +#274279 = FILL_AREA_STYLE('',(#274280)); +#274280 = FILL_AREA_STYLE_COLOUR('',#272831); +#274281 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274282)); +#274282 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274283 = STYLED_ITEM('color',(#274284),#145530); +#274284 = PRESENTATION_STYLE_ASSIGNMENT((#274285)); +#274285 = SURFACE_STYLE_USAGE(.BOTH.,#274286); +#274286 = SURFACE_SIDE_STYLE('',(#274287,#274290)); +#274287 = SURFACE_STYLE_FILL_AREA(#274288); +#274288 = FILL_AREA_STYLE('',(#274289)); +#274289 = FILL_AREA_STYLE_COLOUR('',#272831); +#274290 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274291)); +#274291 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274292 = STYLED_ITEM('color',(#274293),#145697); +#274293 = PRESENTATION_STYLE_ASSIGNMENT((#274294)); +#274294 = SURFACE_STYLE_USAGE(.BOTH.,#274295); +#274295 = SURFACE_SIDE_STYLE('',(#274296,#274299)); +#274296 = SURFACE_STYLE_FILL_AREA(#274297); +#274297 = FILL_AREA_STYLE('',(#274298)); +#274298 = FILL_AREA_STYLE_COLOUR('',#272831); +#274299 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274300)); +#274300 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274301 = STYLED_ITEM('color',(#274302),#145839); +#274302 = PRESENTATION_STYLE_ASSIGNMENT((#274303)); +#274303 = SURFACE_STYLE_USAGE(.BOTH.,#274304); +#274304 = SURFACE_SIDE_STYLE('',(#274305,#274308)); +#274305 = SURFACE_STYLE_FILL_AREA(#274306); +#274306 = FILL_AREA_STYLE('',(#274307)); +#274307 = FILL_AREA_STYLE_COLOUR('',#272831); +#274308 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274309)); +#274309 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274310 = STYLED_ITEM('color',(#274311),#146010); +#274311 = PRESENTATION_STYLE_ASSIGNMENT((#274312)); +#274312 = SURFACE_STYLE_USAGE(.BOTH.,#274313); +#274313 = SURFACE_SIDE_STYLE('',(#274314,#274317)); +#274314 = SURFACE_STYLE_FILL_AREA(#274315); +#274315 = FILL_AREA_STYLE('',(#274316)); +#274316 = FILL_AREA_STYLE_COLOUR('',#272831); +#274317 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274318)); +#274318 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274319 = STYLED_ITEM('color',(#274320),#146181); +#274320 = PRESENTATION_STYLE_ASSIGNMENT((#274321)); +#274321 = SURFACE_STYLE_USAGE(.BOTH.,#274322); +#274322 = SURFACE_SIDE_STYLE('',(#274323,#274326)); +#274323 = SURFACE_STYLE_FILL_AREA(#274324); +#274324 = FILL_AREA_STYLE('',(#274325)); +#274325 = FILL_AREA_STYLE_COLOUR('',#272831); +#274326 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274327)); +#274327 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274328 = STYLED_ITEM('color',(#274329),#146352); +#274329 = PRESENTATION_STYLE_ASSIGNMENT((#274330)); +#274330 = SURFACE_STYLE_USAGE(.BOTH.,#274331); +#274331 = SURFACE_SIDE_STYLE('',(#274332,#274335)); +#274332 = SURFACE_STYLE_FILL_AREA(#274333); +#274333 = FILL_AREA_STYLE('',(#274334)); +#274334 = FILL_AREA_STYLE_COLOUR('',#272831); +#274335 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274336)); +#274336 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274337 = STYLED_ITEM('color',(#274338),#146523); +#274338 = PRESENTATION_STYLE_ASSIGNMENT((#274339)); +#274339 = SURFACE_STYLE_USAGE(.BOTH.,#274340); +#274340 = SURFACE_SIDE_STYLE('',(#274341,#274344)); +#274341 = SURFACE_STYLE_FILL_AREA(#274342); +#274342 = FILL_AREA_STYLE('',(#274343)); +#274343 = FILL_AREA_STYLE_COLOUR('',#272831); +#274344 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274345)); +#274345 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274346 = STYLED_ITEM('color',(#274347),#146694); +#274347 = PRESENTATION_STYLE_ASSIGNMENT((#274348)); +#274348 = SURFACE_STYLE_USAGE(.BOTH.,#274349); +#274349 = SURFACE_SIDE_STYLE('',(#274350,#274353)); +#274350 = SURFACE_STYLE_FILL_AREA(#274351); +#274351 = FILL_AREA_STYLE('',(#274352)); +#274352 = FILL_AREA_STYLE_COLOUR('',#272831); +#274353 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274354)); +#274354 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274355 = STYLED_ITEM('color',(#274356),#146865); +#274356 = PRESENTATION_STYLE_ASSIGNMENT((#274357)); +#274357 = SURFACE_STYLE_USAGE(.BOTH.,#274358); +#274358 = SURFACE_SIDE_STYLE('',(#274359,#274362)); +#274359 = SURFACE_STYLE_FILL_AREA(#274360); +#274360 = FILL_AREA_STYLE('',(#274361)); +#274361 = FILL_AREA_STYLE_COLOUR('',#272831); +#274362 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274363)); +#274363 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274364 = STYLED_ITEM('color',(#274365),#147036); +#274365 = PRESENTATION_STYLE_ASSIGNMENT((#274366)); +#274366 = SURFACE_STYLE_USAGE(.BOTH.,#274367); +#274367 = SURFACE_SIDE_STYLE('',(#274368,#274371)); +#274368 = SURFACE_STYLE_FILL_AREA(#274369); +#274369 = FILL_AREA_STYLE('',(#274370)); +#274370 = FILL_AREA_STYLE_COLOUR('',#272831); +#274371 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274372)); +#274372 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274373 = STYLED_ITEM('color',(#274374),#147207); +#274374 = PRESENTATION_STYLE_ASSIGNMENT((#274375)); +#274375 = SURFACE_STYLE_USAGE(.BOTH.,#274376); +#274376 = SURFACE_SIDE_STYLE('',(#274377,#274380)); +#274377 = SURFACE_STYLE_FILL_AREA(#274378); +#274378 = FILL_AREA_STYLE('',(#274379)); +#274379 = FILL_AREA_STYLE_COLOUR('',#272831); +#274380 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274381)); +#274381 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274382 = STYLED_ITEM('color',(#274383),#147378); +#274383 = PRESENTATION_STYLE_ASSIGNMENT((#274384)); +#274384 = SURFACE_STYLE_USAGE(.BOTH.,#274385); +#274385 = SURFACE_SIDE_STYLE('',(#274386,#274389)); +#274386 = SURFACE_STYLE_FILL_AREA(#274387); +#274387 = FILL_AREA_STYLE('',(#274388)); +#274388 = FILL_AREA_STYLE_COLOUR('',#272831); +#274389 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274390)); +#274390 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274391 = STYLED_ITEM('color',(#274392),#147478); +#274392 = PRESENTATION_STYLE_ASSIGNMENT((#274393)); +#274393 = SURFACE_STYLE_USAGE(.BOTH.,#274394); +#274394 = SURFACE_SIDE_STYLE('',(#274395,#274398)); +#274395 = SURFACE_STYLE_FILL_AREA(#274396); +#274396 = FILL_AREA_STYLE('',(#274397)); +#274397 = FILL_AREA_STYLE_COLOUR('',#272831); +#274398 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274399)); +#274399 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274400 = STYLED_ITEM('color',(#274401),#147671); +#274401 = PRESENTATION_STYLE_ASSIGNMENT((#274402)); +#274402 = SURFACE_STYLE_USAGE(.BOTH.,#274403); +#274403 = SURFACE_SIDE_STYLE('',(#274404,#274407)); +#274404 = SURFACE_STYLE_FILL_AREA(#274405); +#274405 = FILL_AREA_STYLE('',(#274406)); +#274406 = FILL_AREA_STYLE_COLOUR('',#272831); +#274407 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274408)); +#274408 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274409 = STYLED_ITEM('color',(#274410),#147864); +#274410 = PRESENTATION_STYLE_ASSIGNMENT((#274411)); +#274411 = SURFACE_STYLE_USAGE(.BOTH.,#274412); +#274412 = SURFACE_SIDE_STYLE('',(#274413,#274416)); +#274413 = SURFACE_STYLE_FILL_AREA(#274414); +#274414 = FILL_AREA_STYLE('',(#274415)); +#274415 = FILL_AREA_STYLE_COLOUR('',#272831); +#274416 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274417)); +#274417 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274418 = STYLED_ITEM('color',(#274419),#147933); +#274419 = PRESENTATION_STYLE_ASSIGNMENT((#274420)); +#274420 = SURFACE_STYLE_USAGE(.BOTH.,#274421); +#274421 = SURFACE_SIDE_STYLE('',(#274422,#274425)); +#274422 = SURFACE_STYLE_FILL_AREA(#274423); +#274423 = FILL_AREA_STYLE('',(#274424)); +#274424 = FILL_AREA_STYLE_COLOUR('',#272831); +#274425 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274426)); +#274426 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274427 = STYLED_ITEM('color',(#274428),#148136); +#274428 = PRESENTATION_STYLE_ASSIGNMENT((#274429)); +#274429 = SURFACE_STYLE_USAGE(.BOTH.,#274430); +#274430 = SURFACE_SIDE_STYLE('',(#274431,#274434)); +#274431 = SURFACE_STYLE_FILL_AREA(#274432); +#274432 = FILL_AREA_STYLE('',(#274433)); +#274433 = FILL_AREA_STYLE_COLOUR('',#272831); +#274434 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274435)); +#274435 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274436 = STYLED_ITEM('color',(#274437),#148367); +#274437 = PRESENTATION_STYLE_ASSIGNMENT((#274438)); +#274438 = SURFACE_STYLE_USAGE(.BOTH.,#274439); +#274439 = SURFACE_SIDE_STYLE('',(#274440,#274443)); +#274440 = SURFACE_STYLE_FILL_AREA(#274441); +#274441 = FILL_AREA_STYLE('',(#274442)); +#274442 = FILL_AREA_STYLE_COLOUR('',#272831); +#274443 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274444)); +#274444 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274445 = STYLED_ITEM('color',(#274446),#148545); +#274446 = PRESENTATION_STYLE_ASSIGNMENT((#274447)); +#274447 = SURFACE_STYLE_USAGE(.BOTH.,#274448); +#274448 = SURFACE_SIDE_STYLE('',(#274449,#274452)); +#274449 = SURFACE_STYLE_FILL_AREA(#274450); +#274450 = FILL_AREA_STYLE('',(#274451)); +#274451 = FILL_AREA_STYLE_COLOUR('',#272831); +#274452 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274453)); +#274453 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274454 = STYLED_ITEM('color',(#274455),#148766); +#274455 = PRESENTATION_STYLE_ASSIGNMENT((#274456)); +#274456 = SURFACE_STYLE_USAGE(.BOTH.,#274457); +#274457 = SURFACE_SIDE_STYLE('',(#274458,#274461)); +#274458 = SURFACE_STYLE_FILL_AREA(#274459); +#274459 = FILL_AREA_STYLE('',(#274460)); +#274460 = FILL_AREA_STYLE_COLOUR('',#272831); +#274461 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274462)); +#274462 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274463 = STYLED_ITEM('color',(#274464),#149079); +#274464 = PRESENTATION_STYLE_ASSIGNMENT((#274465)); +#274465 = SURFACE_STYLE_USAGE(.BOTH.,#274466); +#274466 = SURFACE_SIDE_STYLE('',(#274467,#274470)); +#274467 = SURFACE_STYLE_FILL_AREA(#274468); +#274468 = FILL_AREA_STYLE('',(#274469)); +#274469 = FILL_AREA_STYLE_COLOUR('',#272831); +#274470 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274471)); +#274471 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274472 = STYLED_ITEM('color',(#274473),#149282); +#274473 = PRESENTATION_STYLE_ASSIGNMENT((#274474)); +#274474 = SURFACE_STYLE_USAGE(.BOTH.,#274475); +#274475 = SURFACE_SIDE_STYLE('',(#274476,#274479)); +#274476 = SURFACE_STYLE_FILL_AREA(#274477); +#274477 = FILL_AREA_STYLE('',(#274478)); +#274478 = FILL_AREA_STYLE_COLOUR('',#272831); +#274479 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274480)); +#274480 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274481 = STYLED_ITEM('color',(#274482),#149448); +#274482 = PRESENTATION_STYLE_ASSIGNMENT((#274483)); +#274483 = SURFACE_STYLE_USAGE(.BOTH.,#274484); +#274484 = SURFACE_SIDE_STYLE('',(#274485,#274488)); +#274485 = SURFACE_STYLE_FILL_AREA(#274486); +#274486 = FILL_AREA_STYLE('',(#274487)); +#274487 = FILL_AREA_STYLE_COLOUR('',#272831); +#274488 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274489)); +#274489 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274490 = STYLED_ITEM('color',(#274491),#149598); +#274491 = PRESENTATION_STYLE_ASSIGNMENT((#274492)); +#274492 = SURFACE_STYLE_USAGE(.BOTH.,#274493); +#274493 = SURFACE_SIDE_STYLE('',(#274494,#274497)); +#274494 = SURFACE_STYLE_FILL_AREA(#274495); +#274495 = FILL_AREA_STYLE('',(#274496)); +#274496 = FILL_AREA_STYLE_COLOUR('',#272831); +#274497 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274498)); +#274498 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274499 = STYLED_ITEM('color',(#274500),#149741); +#274500 = PRESENTATION_STYLE_ASSIGNMENT((#274501)); +#274501 = SURFACE_STYLE_USAGE(.BOTH.,#274502); +#274502 = SURFACE_SIDE_STYLE('',(#274503,#274506)); +#274503 = SURFACE_STYLE_FILL_AREA(#274504); +#274504 = FILL_AREA_STYLE('',(#274505)); +#274505 = FILL_AREA_STYLE_COLOUR('',#272831); +#274506 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274507)); +#274507 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274508 = STYLED_ITEM('color',(#274509),#149884); +#274509 = PRESENTATION_STYLE_ASSIGNMENT((#274510)); +#274510 = SURFACE_STYLE_USAGE(.BOTH.,#274511); +#274511 = SURFACE_SIDE_STYLE('',(#274512,#274515)); +#274512 = SURFACE_STYLE_FILL_AREA(#274513); +#274513 = FILL_AREA_STYLE('',(#274514)); +#274514 = FILL_AREA_STYLE_COLOUR('',#272831); +#274515 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274516)); +#274516 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274517 = STYLED_ITEM('color',(#274518),#150078); +#274518 = PRESENTATION_STYLE_ASSIGNMENT((#274519)); +#274519 = SURFACE_STYLE_USAGE(.BOTH.,#274520); +#274520 = SURFACE_SIDE_STYLE('',(#274521,#274524)); +#274521 = SURFACE_STYLE_FILL_AREA(#274522); +#274522 = FILL_AREA_STYLE('',(#274523)); +#274523 = FILL_AREA_STYLE_COLOUR('',#272831); +#274524 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274525)); +#274525 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274526 = STYLED_ITEM('color',(#274527),#150290); +#274527 = PRESENTATION_STYLE_ASSIGNMENT((#274528)); +#274528 = SURFACE_STYLE_USAGE(.BOTH.,#274529); +#274529 = SURFACE_SIDE_STYLE('',(#274530,#274533)); +#274530 = SURFACE_STYLE_FILL_AREA(#274531); +#274531 = FILL_AREA_STYLE('',(#274532)); +#274532 = FILL_AREA_STYLE_COLOUR('',#272831); +#274533 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274534)); +#274534 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274535 = STYLED_ITEM('color',(#274536),#150484); +#274536 = PRESENTATION_STYLE_ASSIGNMENT((#274537)); +#274537 = SURFACE_STYLE_USAGE(.BOTH.,#274538); +#274538 = SURFACE_SIDE_STYLE('',(#274539,#274542)); +#274539 = SURFACE_STYLE_FILL_AREA(#274540); +#274540 = FILL_AREA_STYLE('',(#274541)); +#274541 = FILL_AREA_STYLE_COLOUR('',#272831); +#274542 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274543)); +#274543 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274544 = STYLED_ITEM('color',(#274545),#150634); +#274545 = PRESENTATION_STYLE_ASSIGNMENT((#274546)); +#274546 = SURFACE_STYLE_USAGE(.BOTH.,#274547); +#274547 = SURFACE_SIDE_STYLE('',(#274548,#274551)); +#274548 = SURFACE_STYLE_FILL_AREA(#274549); +#274549 = FILL_AREA_STYLE('',(#274550)); +#274550 = FILL_AREA_STYLE_COLOUR('',#272831); +#274551 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274552)); +#274552 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274553 = STYLED_ITEM('color',(#274554),#150828); +#274554 = PRESENTATION_STYLE_ASSIGNMENT((#274555)); +#274555 = SURFACE_STYLE_USAGE(.BOTH.,#274556); +#274556 = SURFACE_SIDE_STYLE('',(#274557,#274560)); +#274557 = SURFACE_STYLE_FILL_AREA(#274558); +#274558 = FILL_AREA_STYLE('',(#274559)); +#274559 = FILL_AREA_STYLE_COLOUR('',#272831); +#274560 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274561)); +#274561 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274562 = STYLED_ITEM('color',(#274563),#150978); +#274563 = PRESENTATION_STYLE_ASSIGNMENT((#274564)); +#274564 = SURFACE_STYLE_USAGE(.BOTH.,#274565); +#274565 = SURFACE_SIDE_STYLE('',(#274566,#274569)); +#274566 = SURFACE_STYLE_FILL_AREA(#274567); +#274567 = FILL_AREA_STYLE('',(#274568)); +#274568 = FILL_AREA_STYLE_COLOUR('',#272831); +#274569 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274570)); +#274570 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274571 = STYLED_ITEM('color',(#274572),#151121); +#274572 = PRESENTATION_STYLE_ASSIGNMENT((#274573)); +#274573 = SURFACE_STYLE_USAGE(.BOTH.,#274574); +#274574 = SURFACE_SIDE_STYLE('',(#274575,#274578)); +#274575 = SURFACE_STYLE_FILL_AREA(#274576); +#274576 = FILL_AREA_STYLE('',(#274577)); +#274577 = FILL_AREA_STYLE_COLOUR('',#272831); +#274578 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274579)); +#274579 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274580 = STYLED_ITEM('color',(#274581),#151327); +#274581 = PRESENTATION_STYLE_ASSIGNMENT((#274582)); +#274582 = SURFACE_STYLE_USAGE(.BOTH.,#274583); +#274583 = SURFACE_SIDE_STYLE('',(#274584,#274587)); +#274584 = SURFACE_STYLE_FILL_AREA(#274585); +#274585 = FILL_AREA_STYLE('',(#274586)); +#274586 = FILL_AREA_STYLE_COLOUR('',#272831); +#274587 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274588)); +#274588 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274589 = STYLED_ITEM('color',(#274590),#151402); +#274590 = PRESENTATION_STYLE_ASSIGNMENT((#274591)); +#274591 = SURFACE_STYLE_USAGE(.BOTH.,#274592); +#274592 = SURFACE_SIDE_STYLE('',(#274593,#274596)); +#274593 = SURFACE_STYLE_FILL_AREA(#274594); +#274594 = FILL_AREA_STYLE('',(#274595)); +#274595 = FILL_AREA_STYLE_COLOUR('',#272831); +#274596 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274597)); +#274597 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274598 = STYLED_ITEM('color',(#274599),#151446); +#274599 = PRESENTATION_STYLE_ASSIGNMENT((#274600)); +#274600 = SURFACE_STYLE_USAGE(.BOTH.,#274601); +#274601 = SURFACE_SIDE_STYLE('',(#274602,#274605)); +#274602 = SURFACE_STYLE_FILL_AREA(#274603); +#274603 = FILL_AREA_STYLE('',(#274604)); +#274604 = FILL_AREA_STYLE_COLOUR('',#272831); +#274605 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274606)); +#274606 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274607 = STYLED_ITEM('color',(#274608),#151624); +#274608 = PRESENTATION_STYLE_ASSIGNMENT((#274609)); +#274609 = SURFACE_STYLE_USAGE(.BOTH.,#274610); +#274610 = SURFACE_SIDE_STYLE('',(#274611,#274614)); +#274611 = SURFACE_STYLE_FILL_AREA(#274612); +#274612 = FILL_AREA_STYLE('',(#274613)); +#274613 = FILL_AREA_STYLE_COLOUR('',#272831); +#274614 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274615)); +#274615 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274616 = STYLED_ITEM('color',(#274617),#151701); +#274617 = PRESENTATION_STYLE_ASSIGNMENT((#274618)); +#274618 = SURFACE_STYLE_USAGE(.BOTH.,#274619); +#274619 = SURFACE_SIDE_STYLE('',(#274620,#274623)); +#274620 = SURFACE_STYLE_FILL_AREA(#274621); +#274621 = FILL_AREA_STYLE('',(#274622)); +#274622 = FILL_AREA_STYLE_COLOUR('',#272831); +#274623 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274624)); +#274624 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274625 = STYLED_ITEM('color',(#274626),#152149); +#274626 = PRESENTATION_STYLE_ASSIGNMENT((#274627)); +#274627 = SURFACE_STYLE_USAGE(.BOTH.,#274628); +#274628 = SURFACE_SIDE_STYLE('',(#274629,#274632)); +#274629 = SURFACE_STYLE_FILL_AREA(#274630); +#274630 = FILL_AREA_STYLE('',(#274631)); +#274631 = FILL_AREA_STYLE_COLOUR('',#272831); +#274632 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274633)); +#274633 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274634 = STYLED_ITEM('color',(#274635),#152316); +#274635 = PRESENTATION_STYLE_ASSIGNMENT((#274636)); +#274636 = SURFACE_STYLE_USAGE(.BOTH.,#274637); +#274637 = SURFACE_SIDE_STYLE('',(#274638,#274641)); +#274638 = SURFACE_STYLE_FILL_AREA(#274639); +#274639 = FILL_AREA_STYLE('',(#274640)); +#274640 = FILL_AREA_STYLE_COLOUR('',#272831); +#274641 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274642)); +#274642 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274643 = STYLED_ITEM('color',(#274644),#152487); +#274644 = PRESENTATION_STYLE_ASSIGNMENT((#274645)); +#274645 = SURFACE_STYLE_USAGE(.BOTH.,#274646); +#274646 = SURFACE_SIDE_STYLE('',(#274647,#274650)); +#274647 = SURFACE_STYLE_FILL_AREA(#274648); +#274648 = FILL_AREA_STYLE('',(#274649)); +#274649 = FILL_AREA_STYLE_COLOUR('',#272831); +#274650 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274651)); +#274651 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274652 = STYLED_ITEM('color',(#274653),#152653); +#274653 = PRESENTATION_STYLE_ASSIGNMENT((#274654)); +#274654 = SURFACE_STYLE_USAGE(.BOTH.,#274655); +#274655 = SURFACE_SIDE_STYLE('',(#274656,#274659)); +#274656 = SURFACE_STYLE_FILL_AREA(#274657); +#274657 = FILL_AREA_STYLE('',(#274658)); +#274658 = FILL_AREA_STYLE_COLOUR('',#272831); +#274659 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274660)); +#274660 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274661 = STYLED_ITEM('color',(#274662),#152763); +#274662 = PRESENTATION_STYLE_ASSIGNMENT((#274663)); +#274663 = SURFACE_STYLE_USAGE(.BOTH.,#274664); +#274664 = SURFACE_SIDE_STYLE('',(#274665,#274668)); +#274665 = SURFACE_STYLE_FILL_AREA(#274666); +#274666 = FILL_AREA_STYLE('',(#274667)); +#274667 = FILL_AREA_STYLE_COLOUR('',#272831); +#274668 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274669)); +#274669 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274670 = STYLED_ITEM('color',(#274671),#152994); +#274671 = PRESENTATION_STYLE_ASSIGNMENT((#274672)); +#274672 = SURFACE_STYLE_USAGE(.BOTH.,#274673); +#274673 = SURFACE_SIDE_STYLE('',(#274674,#274677)); +#274674 = SURFACE_STYLE_FILL_AREA(#274675); +#274675 = FILL_AREA_STYLE('',(#274676)); +#274676 = FILL_AREA_STYLE_COLOUR('',#272831); +#274677 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274678)); +#274678 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274679 = STYLED_ITEM('color',(#274680),#153079); +#274680 = PRESENTATION_STYLE_ASSIGNMENT((#274681)); +#274681 = SURFACE_STYLE_USAGE(.BOTH.,#274682); +#274682 = SURFACE_SIDE_STYLE('',(#274683,#274686)); +#274683 = SURFACE_STYLE_FILL_AREA(#274684); +#274684 = FILL_AREA_STYLE('',(#274685)); +#274685 = FILL_AREA_STYLE_COLOUR('',#272831); +#274686 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274687)); +#274687 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274688 = STYLED_ITEM('color',(#274689),#153300); +#274689 = PRESENTATION_STYLE_ASSIGNMENT((#274690)); +#274690 = SURFACE_STYLE_USAGE(.BOTH.,#274691); +#274691 = SURFACE_SIDE_STYLE('',(#274692,#274695)); +#274692 = SURFACE_STYLE_FILL_AREA(#274693); +#274693 = FILL_AREA_STYLE('',(#274694)); +#274694 = FILL_AREA_STYLE_COLOUR('',#272831); +#274695 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274696)); +#274696 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274697 = STYLED_ITEM('color',(#274698),#153344); +#274698 = PRESENTATION_STYLE_ASSIGNMENT((#274699)); +#274699 = SURFACE_STYLE_USAGE(.BOTH.,#274700); +#274700 = SURFACE_SIDE_STYLE('',(#274701,#274704)); +#274701 = SURFACE_STYLE_FILL_AREA(#274702); +#274702 = FILL_AREA_STYLE('',(#274703)); +#274703 = FILL_AREA_STYLE_COLOUR('',#272831); +#274704 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274705)); +#274705 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274706 = STYLED_ITEM('color',(#274707),#153438); +#274707 = PRESENTATION_STYLE_ASSIGNMENT((#274708)); +#274708 = SURFACE_STYLE_USAGE(.BOTH.,#274709); +#274709 = SURFACE_SIDE_STYLE('',(#274710,#274713)); +#274710 = SURFACE_STYLE_FILL_AREA(#274711); +#274711 = FILL_AREA_STYLE('',(#274712)); +#274712 = FILL_AREA_STYLE_COLOUR('',#272831); +#274713 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274714)); +#274714 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274715 = STYLED_ITEM('color',(#274716),#153694); +#274716 = PRESENTATION_STYLE_ASSIGNMENT((#274717)); +#274717 = SURFACE_STYLE_USAGE(.BOTH.,#274718); +#274718 = SURFACE_SIDE_STYLE('',(#274719,#274722)); +#274719 = SURFACE_STYLE_FILL_AREA(#274720); +#274720 = FILL_AREA_STYLE('',(#274721)); +#274721 = FILL_AREA_STYLE_COLOUR('',#272831); +#274722 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274723)); +#274723 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274724 = STYLED_ITEM('color',(#274725),#153950); +#274725 = PRESENTATION_STYLE_ASSIGNMENT((#274726)); +#274726 = SURFACE_STYLE_USAGE(.BOTH.,#274727); +#274727 = SURFACE_SIDE_STYLE('',(#274728,#274731)); +#274728 = SURFACE_STYLE_FILL_AREA(#274729); +#274729 = FILL_AREA_STYLE('',(#274730)); +#274730 = FILL_AREA_STYLE_COLOUR('',#272831); +#274731 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274732)); +#274732 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274733 = STYLED_ITEM('color',(#274734),#154230); +#274734 = PRESENTATION_STYLE_ASSIGNMENT((#274735)); +#274735 = SURFACE_STYLE_USAGE(.BOTH.,#274736); +#274736 = SURFACE_SIDE_STYLE('',(#274737,#274740)); +#274737 = SURFACE_STYLE_FILL_AREA(#274738); +#274738 = FILL_AREA_STYLE('',(#274739)); +#274739 = FILL_AREA_STYLE_COLOUR('',#272831); +#274740 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274741)); +#274741 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274742 = STYLED_ITEM('color',(#274743),#154274); +#274743 = PRESENTATION_STYLE_ASSIGNMENT((#274744)); +#274744 = SURFACE_STYLE_USAGE(.BOTH.,#274745); +#274745 = SURFACE_SIDE_STYLE('',(#274746,#274749)); +#274746 = SURFACE_STYLE_FILL_AREA(#274747); +#274747 = FILL_AREA_STYLE('',(#274748)); +#274748 = FILL_AREA_STYLE_COLOUR('',#272831); +#274749 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274750)); +#274750 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274751 = STYLED_ITEM('color',(#274752),#154398); +#274752 = PRESENTATION_STYLE_ASSIGNMENT((#274753)); +#274753 = SURFACE_STYLE_USAGE(.BOTH.,#274754); +#274754 = SURFACE_SIDE_STYLE('',(#274755,#274758)); +#274755 = SURFACE_STYLE_FILL_AREA(#274756); +#274756 = FILL_AREA_STYLE('',(#274757)); +#274757 = FILL_AREA_STYLE_COLOUR('',#272831); +#274758 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274759)); +#274759 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274760 = STYLED_ITEM('color',(#274761),#154587); +#274761 = PRESENTATION_STYLE_ASSIGNMENT((#274762)); +#274762 = SURFACE_STYLE_USAGE(.BOTH.,#274763); +#274763 = SURFACE_SIDE_STYLE('',(#274764,#274767)); +#274764 = SURFACE_STYLE_FILL_AREA(#274765); +#274765 = FILL_AREA_STYLE('',(#274766)); +#274766 = FILL_AREA_STYLE_COLOUR('',#272831); +#274767 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274768)); +#274768 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274769 = STYLED_ITEM('color',(#274770),#154945); +#274770 = PRESENTATION_STYLE_ASSIGNMENT((#274771)); +#274771 = SURFACE_STYLE_USAGE(.BOTH.,#274772); +#274772 = SURFACE_SIDE_STYLE('',(#274773,#274776)); +#274773 = SURFACE_STYLE_FILL_AREA(#274774); +#274774 = FILL_AREA_STYLE('',(#274775)); +#274775 = FILL_AREA_STYLE_COLOUR('',#272831); +#274776 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274777)); +#274777 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274778 = STYLED_ITEM('color',(#274779),#155240); +#274779 = PRESENTATION_STYLE_ASSIGNMENT((#274780)); +#274780 = SURFACE_STYLE_USAGE(.BOTH.,#274781); +#274781 = SURFACE_SIDE_STYLE('',(#274782,#274785)); +#274782 = SURFACE_STYLE_FILL_AREA(#274783); +#274783 = FILL_AREA_STYLE('',(#274784)); +#274784 = FILL_AREA_STYLE_COLOUR('',#272831); +#274785 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274786)); +#274786 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274787 = STYLED_ITEM('color',(#274788),#155590); +#274788 = PRESENTATION_STYLE_ASSIGNMENT((#274789)); +#274789 = SURFACE_STYLE_USAGE(.BOTH.,#274790); +#274790 = SURFACE_SIDE_STYLE('',(#274791,#274794)); +#274791 = SURFACE_STYLE_FILL_AREA(#274792); +#274792 = FILL_AREA_STYLE('',(#274793)); +#274793 = FILL_AREA_STYLE_COLOUR('',#272831); +#274794 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274795)); +#274795 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274796 = STYLED_ITEM('color',(#274797),#155885); +#274797 = PRESENTATION_STYLE_ASSIGNMENT((#274798)); +#274798 = SURFACE_STYLE_USAGE(.BOTH.,#274799); +#274799 = SURFACE_SIDE_STYLE('',(#274800,#274803)); +#274800 = SURFACE_STYLE_FILL_AREA(#274801); +#274801 = FILL_AREA_STYLE('',(#274802)); +#274802 = FILL_AREA_STYLE_COLOUR('',#272831); +#274803 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274804)); +#274804 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274805 = STYLED_ITEM('color',(#274806),#156208); +#274806 = PRESENTATION_STYLE_ASSIGNMENT((#274807)); +#274807 = SURFACE_STYLE_USAGE(.BOTH.,#274808); +#274808 = SURFACE_SIDE_STYLE('',(#274809,#274812)); +#274809 = SURFACE_STYLE_FILL_AREA(#274810); +#274810 = FILL_AREA_STYLE('',(#274811)); +#274811 = FILL_AREA_STYLE_COLOUR('',#272831); +#274812 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274813)); +#274813 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274814 = STYLED_ITEM('color',(#274815),#156480); +#274815 = PRESENTATION_STYLE_ASSIGNMENT((#274816)); +#274816 = SURFACE_STYLE_USAGE(.BOTH.,#274817); +#274817 = SURFACE_SIDE_STYLE('',(#274818,#274821)); +#274818 = SURFACE_STYLE_FILL_AREA(#274819); +#274819 = FILL_AREA_STYLE('',(#274820)); +#274820 = FILL_AREA_STYLE_COLOUR('',#272831); +#274821 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274822)); +#274822 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274823 = STYLED_ITEM('color',(#274824),#156705); +#274824 = PRESENTATION_STYLE_ASSIGNMENT((#274825)); +#274825 = SURFACE_STYLE_USAGE(.BOTH.,#274826); +#274826 = SURFACE_SIDE_STYLE('',(#274827,#274830)); +#274827 = SURFACE_STYLE_FILL_AREA(#274828); +#274828 = FILL_AREA_STYLE('',(#274829)); +#274829 = FILL_AREA_STYLE_COLOUR('',#272831); +#274830 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274831)); +#274831 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274832 = STYLED_ITEM('color',(#274833),#156831); +#274833 = PRESENTATION_STYLE_ASSIGNMENT((#274834)); +#274834 = SURFACE_STYLE_USAGE(.BOTH.,#274835); +#274835 = SURFACE_SIDE_STYLE('',(#274836,#274839)); +#274836 = SURFACE_STYLE_FILL_AREA(#274837); +#274837 = FILL_AREA_STYLE('',(#274838)); +#274838 = FILL_AREA_STYLE_COLOUR('',#272831); +#274839 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274840)); +#274840 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274841 = STYLED_ITEM('color',(#274842),#156966); +#274842 = PRESENTATION_STYLE_ASSIGNMENT((#274843)); +#274843 = SURFACE_STYLE_USAGE(.BOTH.,#274844); +#274844 = SURFACE_SIDE_STYLE('',(#274845,#274848)); +#274845 = SURFACE_STYLE_FILL_AREA(#274846); +#274846 = FILL_AREA_STYLE('',(#274847)); +#274847 = FILL_AREA_STYLE_COLOUR('',#272831); +#274848 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274849)); +#274849 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274850 = STYLED_ITEM('color',(#274851),#157074); +#274851 = PRESENTATION_STYLE_ASSIGNMENT((#274852)); +#274852 = SURFACE_STYLE_USAGE(.BOTH.,#274853); +#274853 = SURFACE_SIDE_STYLE('',(#274854,#274857)); +#274854 = SURFACE_STYLE_FILL_AREA(#274855); +#274855 = FILL_AREA_STYLE('',(#274856)); +#274856 = FILL_AREA_STYLE_COLOUR('',#272831); +#274857 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274858)); +#274858 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274859 = STYLED_ITEM('color',(#274860),#157182); +#274860 = PRESENTATION_STYLE_ASSIGNMENT((#274861)); +#274861 = SURFACE_STYLE_USAGE(.BOTH.,#274862); +#274862 = SURFACE_SIDE_STYLE('',(#274863,#274866)); +#274863 = SURFACE_STYLE_FILL_AREA(#274864); +#274864 = FILL_AREA_STYLE('',(#274865)); +#274865 = FILL_AREA_STYLE_COLOUR('',#272831); +#274866 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274867)); +#274867 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274868 = STYLED_ITEM('color',(#274869),#157276); +#274869 = PRESENTATION_STYLE_ASSIGNMENT((#274870)); +#274870 = SURFACE_STYLE_USAGE(.BOTH.,#274871); +#274871 = SURFACE_SIDE_STYLE('',(#274872,#274875)); +#274872 = SURFACE_STYLE_FILL_AREA(#274873); +#274873 = FILL_AREA_STYLE('',(#274874)); +#274874 = FILL_AREA_STYLE_COLOUR('',#272831); +#274875 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274876)); +#274876 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274877 = STYLED_ITEM('color',(#274878),#157532); +#274878 = PRESENTATION_STYLE_ASSIGNMENT((#274879)); +#274879 = SURFACE_STYLE_USAGE(.BOTH.,#274880); +#274880 = SURFACE_SIDE_STYLE('',(#274881,#274884)); +#274881 = SURFACE_STYLE_FILL_AREA(#274882); +#274882 = FILL_AREA_STYLE('',(#274883)); +#274883 = FILL_AREA_STYLE_COLOUR('',#272831); +#274884 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274885)); +#274885 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274886 = STYLED_ITEM('color',(#274887),#157592); +#274887 = PRESENTATION_STYLE_ASSIGNMENT((#274888)); +#274888 = SURFACE_STYLE_USAGE(.BOTH.,#274889); +#274889 = SURFACE_SIDE_STYLE('',(#274890,#274893)); +#274890 = SURFACE_STYLE_FILL_AREA(#274891); +#274891 = FILL_AREA_STYLE('',(#274892)); +#274892 = FILL_AREA_STYLE_COLOUR('',#272831); +#274893 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274894)); +#274894 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274895 = STYLED_ITEM('color',(#274896),#157871); +#274896 = PRESENTATION_STYLE_ASSIGNMENT((#274897)); +#274897 = SURFACE_STYLE_USAGE(.BOTH.,#274898); +#274898 = SURFACE_SIDE_STYLE('',(#274899,#274902)); +#274899 = SURFACE_STYLE_FILL_AREA(#274900); +#274900 = FILL_AREA_STYLE('',(#274901)); +#274901 = FILL_AREA_STYLE_COLOUR('',#272831); +#274902 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274903)); +#274903 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274904 = STYLED_ITEM('color',(#274905),#157931); +#274905 = PRESENTATION_STYLE_ASSIGNMENT((#274906)); +#274906 = SURFACE_STYLE_USAGE(.BOTH.,#274907); +#274907 = SURFACE_SIDE_STYLE('',(#274908,#274911)); +#274908 = SURFACE_STYLE_FILL_AREA(#274909); +#274909 = FILL_AREA_STYLE('',(#274910)); +#274910 = FILL_AREA_STYLE_COLOUR('',#272831); +#274911 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274912)); +#274912 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274913 = STYLED_ITEM('color',(#274914),#158210); +#274914 = PRESENTATION_STYLE_ASSIGNMENT((#274915)); +#274915 = SURFACE_STYLE_USAGE(.BOTH.,#274916); +#274916 = SURFACE_SIDE_STYLE('',(#274917,#274920)); +#274917 = SURFACE_STYLE_FILL_AREA(#274918); +#274918 = FILL_AREA_STYLE('',(#274919)); +#274919 = FILL_AREA_STYLE_COLOUR('',#272831); +#274920 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274921)); +#274921 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274922 = STYLED_ITEM('color',(#274923),#158287); +#274923 = PRESENTATION_STYLE_ASSIGNMENT((#274924)); +#274924 = SURFACE_STYLE_USAGE(.BOTH.,#274925); +#274925 = SURFACE_SIDE_STYLE('',(#274926,#274929)); +#274926 = SURFACE_STYLE_FILL_AREA(#274927); +#274927 = FILL_AREA_STYLE('',(#274928)); +#274928 = FILL_AREA_STYLE_COLOUR('',#272831); +#274929 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274930)); +#274930 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274931 = STYLED_ITEM('color',(#274932),#158501); +#274932 = PRESENTATION_STYLE_ASSIGNMENT((#274933)); +#274933 = SURFACE_STYLE_USAGE(.BOTH.,#274934); +#274934 = SURFACE_SIDE_STYLE('',(#274935,#274938)); +#274935 = SURFACE_STYLE_FILL_AREA(#274936); +#274936 = FILL_AREA_STYLE('',(#274937)); +#274937 = FILL_AREA_STYLE_COLOUR('',#272831); +#274938 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274939)); +#274939 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274940 = STYLED_ITEM('color',(#274941),#158701); +#274941 = PRESENTATION_STYLE_ASSIGNMENT((#274942)); +#274942 = SURFACE_STYLE_USAGE(.BOTH.,#274943); +#274943 = SURFACE_SIDE_STYLE('',(#274944,#274947)); +#274944 = SURFACE_STYLE_FILL_AREA(#274945); +#274945 = FILL_AREA_STYLE('',(#274946)); +#274946 = FILL_AREA_STYLE_COLOUR('',#272831); +#274947 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274948)); +#274948 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274949 = STYLED_ITEM('color',(#274950),#158795); +#274950 = PRESENTATION_STYLE_ASSIGNMENT((#274951)); +#274951 = SURFACE_STYLE_USAGE(.BOTH.,#274952); +#274952 = SURFACE_SIDE_STYLE('',(#274953,#274956)); +#274953 = SURFACE_STYLE_FILL_AREA(#274954); +#274954 = FILL_AREA_STYLE('',(#274955)); +#274955 = FILL_AREA_STYLE_COLOUR('',#272831); +#274956 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274957)); +#274957 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274958 = STYLED_ITEM('color',(#274959),#158977); +#274959 = PRESENTATION_STYLE_ASSIGNMENT((#274960)); +#274960 = SURFACE_STYLE_USAGE(.BOTH.,#274961); +#274961 = SURFACE_SIDE_STYLE('',(#274962,#274965)); +#274962 = SURFACE_STYLE_FILL_AREA(#274963); +#274963 = FILL_AREA_STYLE('',(#274964)); +#274964 = FILL_AREA_STYLE_COLOUR('',#272831); +#274965 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274966)); +#274966 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274967 = STYLED_ITEM('color',(#274968),#159144); +#274968 = PRESENTATION_STYLE_ASSIGNMENT((#274969)); +#274969 = SURFACE_STYLE_USAGE(.BOTH.,#274970); +#274970 = SURFACE_SIDE_STYLE('',(#274971,#274974)); +#274971 = SURFACE_STYLE_FILL_AREA(#274972); +#274972 = FILL_AREA_STYLE('',(#274973)); +#274973 = FILL_AREA_STYLE_COLOUR('',#272831); +#274974 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274975)); +#274975 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274976 = STYLED_ITEM('color',(#274977),#159337); +#274977 = PRESENTATION_STYLE_ASSIGNMENT((#274978)); +#274978 = SURFACE_STYLE_USAGE(.BOTH.,#274979); +#274979 = SURFACE_SIDE_STYLE('',(#274980,#274983)); +#274980 = SURFACE_STYLE_FILL_AREA(#274981); +#274981 = FILL_AREA_STYLE('',(#274982)); +#274982 = FILL_AREA_STYLE_COLOUR('',#272831); +#274983 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274984)); +#274984 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274985 = STYLED_ITEM('color',(#274986),#159554); +#274986 = PRESENTATION_STYLE_ASSIGNMENT((#274987)); +#274987 = SURFACE_STYLE_USAGE(.BOTH.,#274988); +#274988 = SURFACE_SIDE_STYLE('',(#274989,#274992)); +#274989 = SURFACE_STYLE_FILL_AREA(#274990); +#274990 = FILL_AREA_STYLE('',(#274991)); +#274991 = FILL_AREA_STYLE_COLOUR('',#272831); +#274992 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#274993)); +#274993 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#274994 = STYLED_ITEM('color',(#274995),#159847); +#274995 = PRESENTATION_STYLE_ASSIGNMENT((#274996)); +#274996 = SURFACE_STYLE_USAGE(.BOTH.,#274997); +#274997 = SURFACE_SIDE_STYLE('',(#274998,#275001)); +#274998 = SURFACE_STYLE_FILL_AREA(#274999); +#274999 = FILL_AREA_STYLE('',(#275000)); +#275000 = FILL_AREA_STYLE_COLOUR('',#272831); +#275001 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275002)); +#275002 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275003 = STYLED_ITEM('color',(#275004),#159877); +#275004 = PRESENTATION_STYLE_ASSIGNMENT((#275005)); +#275005 = SURFACE_STYLE_USAGE(.BOTH.,#275006); +#275006 = SURFACE_SIDE_STYLE('',(#275007,#275010)); +#275007 = SURFACE_STYLE_FILL_AREA(#275008); +#275008 = FILL_AREA_STYLE('',(#275009)); +#275009 = FILL_AREA_STYLE_COLOUR('',#272831); +#275010 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275011)); +#275011 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275012 = STYLED_ITEM('color',(#275013),#159921); +#275013 = PRESENTATION_STYLE_ASSIGNMENT((#275014)); +#275014 = SURFACE_STYLE_USAGE(.BOTH.,#275015); +#275015 = SURFACE_SIDE_STYLE('',(#275016,#275019)); +#275016 = SURFACE_STYLE_FILL_AREA(#275017); +#275017 = FILL_AREA_STYLE('',(#275018)); +#275018 = FILL_AREA_STYLE_COLOUR('',#272831); +#275019 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275020)); +#275020 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275021 = STYLED_ITEM('color',(#275022),#159965); +#275022 = PRESENTATION_STYLE_ASSIGNMENT((#275023)); +#275023 = SURFACE_STYLE_USAGE(.BOTH.,#275024); +#275024 = SURFACE_SIDE_STYLE('',(#275025,#275028)); +#275025 = SURFACE_STYLE_FILL_AREA(#275026); +#275026 = FILL_AREA_STYLE('',(#275027)); +#275027 = FILL_AREA_STYLE_COLOUR('',#272831); +#275028 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275029)); +#275029 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275030 = STYLED_ITEM('color',(#275031),#160009); +#275031 = PRESENTATION_STYLE_ASSIGNMENT((#275032)); +#275032 = SURFACE_STYLE_USAGE(.BOTH.,#275033); +#275033 = SURFACE_SIDE_STYLE('',(#275034,#275037)); +#275034 = SURFACE_STYLE_FILL_AREA(#275035); +#275035 = FILL_AREA_STYLE('',(#275036)); +#275036 = FILL_AREA_STYLE_COLOUR('',#272831); +#275037 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275038)); +#275038 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275039 = STYLED_ITEM('color',(#275040),#160053); +#275040 = PRESENTATION_STYLE_ASSIGNMENT((#275041)); +#275041 = SURFACE_STYLE_USAGE(.BOTH.,#275042); +#275042 = SURFACE_SIDE_STYLE('',(#275043,#275046)); +#275043 = SURFACE_STYLE_FILL_AREA(#275044); +#275044 = FILL_AREA_STYLE('',(#275045)); +#275045 = FILL_AREA_STYLE_COLOUR('',#272831); +#275046 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275047)); +#275047 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275048 = STYLED_ITEM('color',(#275049),#160155); +#275049 = PRESENTATION_STYLE_ASSIGNMENT((#275050)); +#275050 = SURFACE_STYLE_USAGE(.BOTH.,#275051); +#275051 = SURFACE_SIDE_STYLE('',(#275052,#275055)); +#275052 = SURFACE_STYLE_FILL_AREA(#275053); +#275053 = FILL_AREA_STYLE('',(#275054)); +#275054 = FILL_AREA_STYLE_COLOUR('',#272831); +#275055 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275056)); +#275056 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275057 = STYLED_ITEM('color',(#275058),#160256); +#275058 = PRESENTATION_STYLE_ASSIGNMENT((#275059)); +#275059 = SURFACE_STYLE_USAGE(.BOTH.,#275060); +#275060 = SURFACE_SIDE_STYLE('',(#275061,#275064)); +#275061 = SURFACE_STYLE_FILL_AREA(#275062); +#275062 = FILL_AREA_STYLE('',(#275063)); +#275063 = FILL_AREA_STYLE_COLOUR('',#272831); +#275064 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275065)); +#275065 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275066 = STYLED_ITEM('color',(#275067),#160357); +#275067 = PRESENTATION_STYLE_ASSIGNMENT((#275068)); +#275068 = SURFACE_STYLE_USAGE(.BOTH.,#275069); +#275069 = SURFACE_SIDE_STYLE('',(#275070,#275073)); +#275070 = SURFACE_STYLE_FILL_AREA(#275071); +#275071 = FILL_AREA_STYLE('',(#275072)); +#275072 = FILL_AREA_STYLE_COLOUR('',#272831); +#275073 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275074)); +#275074 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275075 = STYLED_ITEM('color',(#275076),#160401); +#275076 = PRESENTATION_STYLE_ASSIGNMENT((#275077)); +#275077 = SURFACE_STYLE_USAGE(.BOTH.,#275078); +#275078 = SURFACE_SIDE_STYLE('',(#275079,#275082)); +#275079 = SURFACE_STYLE_FILL_AREA(#275080); +#275080 = FILL_AREA_STYLE('',(#275081)); +#275081 = FILL_AREA_STYLE_COLOUR('',#272831); +#275082 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275083)); +#275083 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275084 = STYLED_ITEM('color',(#275085),#160445); +#275085 = PRESENTATION_STYLE_ASSIGNMENT((#275086)); +#275086 = SURFACE_STYLE_USAGE(.BOTH.,#275087); +#275087 = SURFACE_SIDE_STYLE('',(#275088,#275091)); +#275088 = SURFACE_STYLE_FILL_AREA(#275089); +#275089 = FILL_AREA_STYLE('',(#275090)); +#275090 = FILL_AREA_STYLE_COLOUR('',#272831); +#275091 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275092)); +#275092 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275093 = STYLED_ITEM('color',(#275094),#160489); +#275094 = PRESENTATION_STYLE_ASSIGNMENT((#275095)); +#275095 = SURFACE_STYLE_USAGE(.BOTH.,#275096); +#275096 = SURFACE_SIDE_STYLE('',(#275097,#275100)); +#275097 = SURFACE_STYLE_FILL_AREA(#275098); +#275098 = FILL_AREA_STYLE('',(#275099)); +#275099 = FILL_AREA_STYLE_COLOUR('',#272831); +#275100 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275101)); +#275101 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275102 = STYLED_ITEM('color',(#275103),#160533); +#275103 = PRESENTATION_STYLE_ASSIGNMENT((#275104)); +#275104 = SURFACE_STYLE_USAGE(.BOTH.,#275105); +#275105 = SURFACE_SIDE_STYLE('',(#275106,#275109)); +#275106 = SURFACE_STYLE_FILL_AREA(#275107); +#275107 = FILL_AREA_STYLE('',(#275108)); +#275108 = FILL_AREA_STYLE_COLOUR('',#272831); +#275109 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275110)); +#275110 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275111 = STYLED_ITEM('color',(#275112),#160856); +#275112 = PRESENTATION_STYLE_ASSIGNMENT((#275113)); +#275113 = SURFACE_STYLE_USAGE(.BOTH.,#275114); +#275114 = SURFACE_SIDE_STYLE('',(#275115,#275118)); +#275115 = SURFACE_STYLE_FILL_AREA(#275116); +#275116 = FILL_AREA_STYLE('',(#275117)); +#275117 = FILL_AREA_STYLE_COLOUR('',#272831); +#275118 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275119)); +#275119 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275120 = STYLED_ITEM('color',(#275121),#161008); +#275121 = PRESENTATION_STYLE_ASSIGNMENT((#275122)); +#275122 = SURFACE_STYLE_USAGE(.BOTH.,#275123); +#275123 = SURFACE_SIDE_STYLE('',(#275124,#275127)); +#275124 = SURFACE_STYLE_FILL_AREA(#275125); +#275125 = FILL_AREA_STYLE('',(#275126)); +#275126 = FILL_AREA_STYLE_COLOUR('',#272831); +#275127 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275128)); +#275128 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275129 = STYLED_ITEM('color',(#275130),#161150); +#275130 = PRESENTATION_STYLE_ASSIGNMENT((#275131)); +#275131 = SURFACE_STYLE_USAGE(.BOTH.,#275132); +#275132 = SURFACE_SIDE_STYLE('',(#275133,#275136)); +#275133 = SURFACE_STYLE_FILL_AREA(#275134); +#275134 = FILL_AREA_STYLE('',(#275135)); +#275135 = FILL_AREA_STYLE_COLOUR('',#272831); +#275136 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275137)); +#275137 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275138 = STYLED_ITEM('color',(#275139),#161321); +#275139 = PRESENTATION_STYLE_ASSIGNMENT((#275140)); +#275140 = SURFACE_STYLE_USAGE(.BOTH.,#275141); +#275141 = SURFACE_SIDE_STYLE('',(#275142,#275145)); +#275142 = SURFACE_STYLE_FILL_AREA(#275143); +#275143 = FILL_AREA_STYLE('',(#275144)); +#275144 = FILL_AREA_STYLE_COLOUR('',#272831); +#275145 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275146)); +#275146 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275147 = STYLED_ITEM('color',(#275148),#161492); +#275148 = PRESENTATION_STYLE_ASSIGNMENT((#275149)); +#275149 = SURFACE_STYLE_USAGE(.BOTH.,#275150); +#275150 = SURFACE_SIDE_STYLE('',(#275151,#275154)); +#275151 = SURFACE_STYLE_FILL_AREA(#275152); +#275152 = FILL_AREA_STYLE('',(#275153)); +#275153 = FILL_AREA_STYLE_COLOUR('',#272831); +#275154 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275155)); +#275155 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275156 = STYLED_ITEM('color',(#275157),#161663); +#275157 = PRESENTATION_STYLE_ASSIGNMENT((#275158)); +#275158 = SURFACE_STYLE_USAGE(.BOTH.,#275159); +#275159 = SURFACE_SIDE_STYLE('',(#275160,#275163)); +#275160 = SURFACE_STYLE_FILL_AREA(#275161); +#275161 = FILL_AREA_STYLE('',(#275162)); +#275162 = FILL_AREA_STYLE_COLOUR('',#272831); +#275163 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275164)); +#275164 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275165 = STYLED_ITEM('color',(#275166),#161834); +#275166 = PRESENTATION_STYLE_ASSIGNMENT((#275167)); +#275167 = SURFACE_STYLE_USAGE(.BOTH.,#275168); +#275168 = SURFACE_SIDE_STYLE('',(#275169,#275172)); +#275169 = SURFACE_STYLE_FILL_AREA(#275170); +#275170 = FILL_AREA_STYLE('',(#275171)); +#275171 = FILL_AREA_STYLE_COLOUR('',#272831); +#275172 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275173)); +#275173 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275174 = STYLED_ITEM('color',(#275175),#162028); +#275175 = PRESENTATION_STYLE_ASSIGNMENT((#275176)); +#275176 = SURFACE_STYLE_USAGE(.BOTH.,#275177); +#275177 = SURFACE_SIDE_STYLE('',(#275178,#275181)); +#275178 = SURFACE_STYLE_FILL_AREA(#275179); +#275179 = FILL_AREA_STYLE('',(#275180)); +#275180 = FILL_AREA_STYLE_COLOUR('',#272831); +#275181 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275182)); +#275182 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275183 = STYLED_ITEM('color',(#275184),#162231); +#275184 = PRESENTATION_STYLE_ASSIGNMENT((#275185)); +#275185 = SURFACE_STYLE_USAGE(.BOTH.,#275186); +#275186 = SURFACE_SIDE_STYLE('',(#275187,#275190)); +#275187 = SURFACE_STYLE_FILL_AREA(#275188); +#275188 = FILL_AREA_STYLE('',(#275189)); +#275189 = FILL_AREA_STYLE_COLOUR('',#272831); +#275190 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275191)); +#275191 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275192 = STYLED_ITEM('color',(#275193),#162434); +#275193 = PRESENTATION_STYLE_ASSIGNMENT((#275194)); +#275194 = SURFACE_STYLE_USAGE(.BOTH.,#275195); +#275195 = SURFACE_SIDE_STYLE('',(#275196,#275199)); +#275196 = SURFACE_STYLE_FILL_AREA(#275197); +#275197 = FILL_AREA_STYLE('',(#275198)); +#275198 = FILL_AREA_STYLE_COLOUR('',#272831); +#275199 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275200)); +#275200 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275201 = STYLED_ITEM('color',(#275202),#162662); +#275202 = PRESENTATION_STYLE_ASSIGNMENT((#275203)); +#275203 = SURFACE_STYLE_USAGE(.BOTH.,#275204); +#275204 = SURFACE_SIDE_STYLE('',(#275205,#275208)); +#275205 = SURFACE_STYLE_FILL_AREA(#275206); +#275206 = FILL_AREA_STYLE('',(#275207)); +#275207 = FILL_AREA_STYLE_COLOUR('',#272831); +#275208 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275209)); +#275209 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275210 = STYLED_ITEM('color',(#275211),#162883); +#275211 = PRESENTATION_STYLE_ASSIGNMENT((#275212)); +#275212 = SURFACE_STYLE_USAGE(.BOTH.,#275213); +#275213 = SURFACE_SIDE_STYLE('',(#275214,#275217)); +#275214 = SURFACE_STYLE_FILL_AREA(#275215); +#275215 = FILL_AREA_STYLE('',(#275216)); +#275216 = FILL_AREA_STYLE_COLOUR('',#272831); +#275217 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275218)); +#275218 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275219 = STYLED_ITEM('color',(#275220),#163104); +#275220 = PRESENTATION_STYLE_ASSIGNMENT((#275221)); +#275221 = SURFACE_STYLE_USAGE(.BOTH.,#275222); +#275222 = SURFACE_SIDE_STYLE('',(#275223,#275226)); +#275223 = SURFACE_STYLE_FILL_AREA(#275224); +#275224 = FILL_AREA_STYLE('',(#275225)); +#275225 = FILL_AREA_STYLE_COLOUR('',#272831); +#275226 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275227)); +#275227 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275228 = STYLED_ITEM('color',(#275229),#163156); +#275229 = PRESENTATION_STYLE_ASSIGNMENT((#275230)); +#275230 = SURFACE_STYLE_USAGE(.BOTH.,#275231); +#275231 = SURFACE_SIDE_STYLE('',(#275232,#275235)); +#275232 = SURFACE_STYLE_FILL_AREA(#275233); +#275233 = FILL_AREA_STYLE('',(#275234)); +#275234 = FILL_AREA_STYLE_COLOUR('',#272831); +#275235 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275236)); +#275236 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275237 = STYLED_ITEM('color',(#275238),#163298); +#275238 = PRESENTATION_STYLE_ASSIGNMENT((#275239)); +#275239 = SURFACE_STYLE_USAGE(.BOTH.,#275240); +#275240 = SURFACE_SIDE_STYLE('',(#275241,#275244)); +#275241 = SURFACE_STYLE_FILL_AREA(#275242); +#275242 = FILL_AREA_STYLE('',(#275243)); +#275243 = FILL_AREA_STYLE_COLOUR('',#272831); +#275244 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275245)); +#275245 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275246 = STYLED_ITEM('color',(#275247),#163375); +#275247 = PRESENTATION_STYLE_ASSIGNMENT((#275248)); +#275248 = SURFACE_STYLE_USAGE(.BOTH.,#275249); +#275249 = SURFACE_SIDE_STYLE('',(#275250,#275253)); +#275250 = SURFACE_STYLE_FILL_AREA(#275251); +#275251 = FILL_AREA_STYLE('',(#275252)); +#275252 = FILL_AREA_STYLE_COLOUR('',#272831); +#275253 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275254)); +#275254 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275255 = STYLED_ITEM('color',(#275256),#163513); +#275256 = PRESENTATION_STYLE_ASSIGNMENT((#275257)); +#275257 = SURFACE_STYLE_USAGE(.BOTH.,#275258); +#275258 = SURFACE_SIDE_STYLE('',(#275259,#275262)); +#275259 = SURFACE_STYLE_FILL_AREA(#275260); +#275260 = FILL_AREA_STYLE('',(#275261)); +#275261 = FILL_AREA_STYLE_COLOUR('',#272831); +#275262 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275263)); +#275263 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275264 = STYLED_ITEM('color',(#275265),#163581); +#275265 = PRESENTATION_STYLE_ASSIGNMENT((#275266)); +#275266 = SURFACE_STYLE_USAGE(.BOTH.,#275267); +#275267 = SURFACE_SIDE_STYLE('',(#275268,#275271)); +#275268 = SURFACE_STYLE_FILL_AREA(#275269); +#275269 = FILL_AREA_STYLE('',(#275270)); +#275270 = FILL_AREA_STYLE_COLOUR('',#272831); +#275271 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275272)); +#275272 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275273 = STYLED_ITEM('color',(#275274),#163625); +#275274 = PRESENTATION_STYLE_ASSIGNMENT((#275275)); +#275275 = SURFACE_STYLE_USAGE(.BOTH.,#275276); +#275276 = SURFACE_SIDE_STYLE('',(#275277,#275280)); +#275277 = SURFACE_STYLE_FILL_AREA(#275278); +#275278 = FILL_AREA_STYLE('',(#275279)); +#275279 = FILL_AREA_STYLE_COLOUR('',#272831); +#275280 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275281)); +#275281 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275282 = STYLED_ITEM('color',(#275283),#163669); +#275283 = PRESENTATION_STYLE_ASSIGNMENT((#275284)); +#275284 = SURFACE_STYLE_USAGE(.BOTH.,#275285); +#275285 = SURFACE_SIDE_STYLE('',(#275286,#275289)); +#275286 = SURFACE_STYLE_FILL_AREA(#275287); +#275287 = FILL_AREA_STYLE('',(#275288)); +#275288 = FILL_AREA_STYLE_COLOUR('',#272831); +#275289 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275290)); +#275290 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275291 = STYLED_ITEM('color',(#275292),#163820); +#275292 = PRESENTATION_STYLE_ASSIGNMENT((#275293)); +#275293 = SURFACE_STYLE_USAGE(.BOTH.,#275294); +#275294 = SURFACE_SIDE_STYLE('',(#275295,#275298)); +#275295 = SURFACE_STYLE_FILL_AREA(#275296); +#275296 = FILL_AREA_STYLE('',(#275297)); +#275297 = FILL_AREA_STYLE_COLOUR('',#272831); +#275298 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275299)); +#275299 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275300 = STYLED_ITEM('color',(#275301),#163955); +#275301 = PRESENTATION_STYLE_ASSIGNMENT((#275302)); +#275302 = SURFACE_STYLE_USAGE(.BOTH.,#275303); +#275303 = SURFACE_SIDE_STYLE('',(#275304,#275307)); +#275304 = SURFACE_STYLE_FILL_AREA(#275305); +#275305 = FILL_AREA_STYLE('',(#275306)); +#275306 = FILL_AREA_STYLE_COLOUR('',#272831); +#275307 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275308)); +#275308 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275309 = STYLED_ITEM('color',(#275310),#164049); +#275310 = PRESENTATION_STYLE_ASSIGNMENT((#275311)); +#275311 = SURFACE_STYLE_USAGE(.BOTH.,#275312); +#275312 = SURFACE_SIDE_STYLE('',(#275313,#275316)); +#275313 = SURFACE_STYLE_FILL_AREA(#275314); +#275314 = FILL_AREA_STYLE('',(#275315)); +#275315 = FILL_AREA_STYLE_COLOUR('',#272831); +#275316 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275317)); +#275317 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275318 = STYLED_ITEM('color',(#275319),#164093); +#275319 = PRESENTATION_STYLE_ASSIGNMENT((#275320)); +#275320 = SURFACE_STYLE_USAGE(.BOTH.,#275321); +#275321 = SURFACE_SIDE_STYLE('',(#275322,#275325)); +#275322 = SURFACE_STYLE_FILL_AREA(#275323); +#275323 = FILL_AREA_STYLE('',(#275324)); +#275324 = FILL_AREA_STYLE_COLOUR('',#272831); +#275325 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275326)); +#275326 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275327 = STYLED_ITEM('color',(#275328),#164137); +#275328 = PRESENTATION_STYLE_ASSIGNMENT((#275329)); +#275329 = SURFACE_STYLE_USAGE(.BOTH.,#275330); +#275330 = SURFACE_SIDE_STYLE('',(#275331,#275334)); +#275331 = SURFACE_STYLE_FILL_AREA(#275332); +#275332 = FILL_AREA_STYLE('',(#275333)); +#275333 = FILL_AREA_STYLE_COLOUR('',#272831); +#275334 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275335)); +#275335 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275336 = STYLED_ITEM('color',(#275337),#164330); +#275337 = PRESENTATION_STYLE_ASSIGNMENT((#275338)); +#275338 = SURFACE_STYLE_USAGE(.BOTH.,#275339); +#275339 = SURFACE_SIDE_STYLE('',(#275340,#275343)); +#275340 = SURFACE_STYLE_FILL_AREA(#275341); +#275341 = FILL_AREA_STYLE('',(#275342)); +#275342 = FILL_AREA_STYLE_COLOUR('',#272831); +#275343 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275344)); +#275344 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275345 = STYLED_ITEM('color',(#275346),#164660); +#275346 = PRESENTATION_STYLE_ASSIGNMENT((#275347)); +#275347 = SURFACE_STYLE_USAGE(.BOTH.,#275348); +#275348 = SURFACE_SIDE_STYLE('',(#275349,#275352)); +#275349 = SURFACE_STYLE_FILL_AREA(#275350); +#275350 = FILL_AREA_STYLE('',(#275351)); +#275351 = FILL_AREA_STYLE_COLOUR('',#272831); +#275352 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275353)); +#275353 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275354 = STYLED_ITEM('color',(#275355),#164803); +#275355 = PRESENTATION_STYLE_ASSIGNMENT((#275356)); +#275356 = SURFACE_STYLE_USAGE(.BOTH.,#275357); +#275357 = SURFACE_SIDE_STYLE('',(#275358,#275361)); +#275358 = SURFACE_STYLE_FILL_AREA(#275359); +#275359 = FILL_AREA_STYLE('',(#275360)); +#275360 = FILL_AREA_STYLE_COLOUR('',#272831); +#275361 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275362)); +#275362 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275363 = STYLED_ITEM('color',(#275364),#164913); +#275364 = PRESENTATION_STYLE_ASSIGNMENT((#275365)); +#275365 = SURFACE_STYLE_USAGE(.BOTH.,#275366); +#275366 = SURFACE_SIDE_STYLE('',(#275367,#275370)); +#275367 = SURFACE_STYLE_FILL_AREA(#275368); +#275368 = FILL_AREA_STYLE('',(#275369)); +#275369 = FILL_AREA_STYLE_COLOUR('',#272831); +#275370 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275371)); +#275371 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275372 = STYLED_ITEM('color',(#275373),#164957); +#275373 = PRESENTATION_STYLE_ASSIGNMENT((#275374)); +#275374 = SURFACE_STYLE_USAGE(.BOTH.,#275375); +#275375 = SURFACE_SIDE_STYLE('',(#275376,#275379)); +#275376 = SURFACE_STYLE_FILL_AREA(#275377); +#275377 = FILL_AREA_STYLE('',(#275378)); +#275378 = FILL_AREA_STYLE_COLOUR('',#272831); +#275379 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275380)); +#275380 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275381 = STYLED_ITEM('color',(#275382),#165001); +#275382 = PRESENTATION_STYLE_ASSIGNMENT((#275383)); +#275383 = SURFACE_STYLE_USAGE(.BOTH.,#275384); +#275384 = SURFACE_SIDE_STYLE('',(#275385,#275388)); +#275385 = SURFACE_STYLE_FILL_AREA(#275386); +#275386 = FILL_AREA_STYLE('',(#275387)); +#275387 = FILL_AREA_STYLE_COLOUR('',#272831); +#275388 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275389)); +#275389 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275390 = STYLED_ITEM('color',(#275391),#165152); +#275391 = PRESENTATION_STYLE_ASSIGNMENT((#275392)); +#275392 = SURFACE_STYLE_USAGE(.BOTH.,#275393); +#275393 = SURFACE_SIDE_STYLE('',(#275394,#275397)); +#275394 = SURFACE_STYLE_FILL_AREA(#275395); +#275395 = FILL_AREA_STYLE('',(#275396)); +#275396 = FILL_AREA_STYLE_COLOUR('',#272831); +#275397 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275398)); +#275398 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275399 = STYLED_ITEM('color',(#275400),#165204); +#275400 = PRESENTATION_STYLE_ASSIGNMENT((#275401)); +#275401 = SURFACE_STYLE_USAGE(.BOTH.,#275402); +#275402 = SURFACE_SIDE_STYLE('',(#275403,#275406)); +#275403 = SURFACE_STYLE_FILL_AREA(#275404); +#275404 = FILL_AREA_STYLE('',(#275405)); +#275405 = FILL_AREA_STYLE_COLOUR('',#272831); +#275406 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275407)); +#275407 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275408 = STYLED_ITEM('color',(#275409),#165256); +#275409 = PRESENTATION_STYLE_ASSIGNMENT((#275410)); +#275410 = SURFACE_STYLE_USAGE(.BOTH.,#275411); +#275411 = SURFACE_SIDE_STYLE('',(#275412,#275415)); +#275412 = SURFACE_STYLE_FILL_AREA(#275413); +#275413 = FILL_AREA_STYLE('',(#275414)); +#275414 = FILL_AREA_STYLE_COLOUR('',#272831); +#275415 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275416)); +#275416 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275417 = STYLED_ITEM('color',(#275418),#165427); +#275418 = PRESENTATION_STYLE_ASSIGNMENT((#275419)); +#275419 = SURFACE_STYLE_USAGE(.BOTH.,#275420); +#275420 = SURFACE_SIDE_STYLE('',(#275421,#275424)); +#275421 = SURFACE_STYLE_FILL_AREA(#275422); +#275422 = FILL_AREA_STYLE('',(#275423)); +#275423 = FILL_AREA_STYLE_COLOUR('',#272831); +#275424 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275425)); +#275425 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275426 = STYLED_ITEM('color',(#275427),#165630); +#275427 = PRESENTATION_STYLE_ASSIGNMENT((#275428)); +#275428 = SURFACE_STYLE_USAGE(.BOTH.,#275429); +#275429 = SURFACE_SIDE_STYLE('',(#275430,#275433)); +#275430 = SURFACE_STYLE_FILL_AREA(#275431); +#275431 = FILL_AREA_STYLE('',(#275432)); +#275432 = FILL_AREA_STYLE_COLOUR('',#272831); +#275433 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275434)); +#275434 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275435 = STYLED_ITEM('color',(#275436),#165943); +#275436 = PRESENTATION_STYLE_ASSIGNMENT((#275437)); +#275437 = SURFACE_STYLE_USAGE(.BOTH.,#275438); +#275438 = SURFACE_SIDE_STYLE('',(#275439,#275442)); +#275439 = SURFACE_STYLE_FILL_AREA(#275440); +#275440 = FILL_AREA_STYLE('',(#275441)); +#275441 = FILL_AREA_STYLE_COLOUR('',#272831); +#275442 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275443)); +#275443 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275444 = STYLED_ITEM('color',(#275445),#166136); +#275445 = PRESENTATION_STYLE_ASSIGNMENT((#275446)); +#275446 = SURFACE_STYLE_USAGE(.BOTH.,#275447); +#275447 = SURFACE_SIDE_STYLE('',(#275448,#275451)); +#275448 = SURFACE_STYLE_FILL_AREA(#275449); +#275449 = FILL_AREA_STYLE('',(#275450)); +#275450 = FILL_AREA_STYLE_COLOUR('',#272831); +#275451 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275452)); +#275452 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275453 = STYLED_ITEM('color',(#275454),#166330); +#275454 = PRESENTATION_STYLE_ASSIGNMENT((#275455)); +#275455 = SURFACE_STYLE_USAGE(.BOTH.,#275456); +#275456 = SURFACE_SIDE_STYLE('',(#275457,#275460)); +#275457 = SURFACE_STYLE_FILL_AREA(#275458); +#275458 = FILL_AREA_STYLE('',(#275459)); +#275459 = FILL_AREA_STYLE_COLOUR('',#272831); +#275460 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275461)); +#275461 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275462 = STYLED_ITEM('color',(#275463),#166473); +#275463 = PRESENTATION_STYLE_ASSIGNMENT((#275464)); +#275464 = SURFACE_STYLE_USAGE(.BOTH.,#275465); +#275465 = SURFACE_SIDE_STYLE('',(#275466,#275469)); +#275466 = SURFACE_STYLE_FILL_AREA(#275467); +#275467 = FILL_AREA_STYLE('',(#275468)); +#275468 = FILL_AREA_STYLE_COLOUR('',#272831); +#275469 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275470)); +#275470 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275471 = STYLED_ITEM('color',(#275472),#166517); +#275472 = PRESENTATION_STYLE_ASSIGNMENT((#275473)); +#275473 = SURFACE_STYLE_USAGE(.BOTH.,#275474); +#275474 = SURFACE_SIDE_STYLE('',(#275475,#275478)); +#275475 = SURFACE_STYLE_FILL_AREA(#275476); +#275476 = FILL_AREA_STYLE('',(#275477)); +#275477 = FILL_AREA_STYLE_COLOUR('',#272831); +#275478 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275479)); +#275479 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275480 = STYLED_ITEM('color',(#275481),#166561); +#275481 = PRESENTATION_STYLE_ASSIGNMENT((#275482)); +#275482 = SURFACE_STYLE_USAGE(.BOTH.,#275483); +#275483 = SURFACE_SIDE_STYLE('',(#275484,#275487)); +#275484 = SURFACE_STYLE_FILL_AREA(#275485); +#275485 = FILL_AREA_STYLE('',(#275486)); +#275486 = FILL_AREA_STYLE_COLOUR('',#272831); +#275487 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275488)); +#275488 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275489 = STYLED_ITEM('color',(#275490),#166605); +#275490 = PRESENTATION_STYLE_ASSIGNMENT((#275491)); +#275491 = SURFACE_STYLE_USAGE(.BOTH.,#275492); +#275492 = SURFACE_SIDE_STYLE('',(#275493,#275496)); +#275493 = SURFACE_STYLE_FILL_AREA(#275494); +#275494 = FILL_AREA_STYLE('',(#275495)); +#275495 = FILL_AREA_STYLE_COLOUR('',#272831); +#275496 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275497)); +#275497 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275498 = STYLED_ITEM('color',(#275499),#166649); +#275499 = PRESENTATION_STYLE_ASSIGNMENT((#275500)); +#275500 = SURFACE_STYLE_USAGE(.BOTH.,#275501); +#275501 = SURFACE_SIDE_STYLE('',(#275502,#275505)); +#275502 = SURFACE_STYLE_FILL_AREA(#275503); +#275503 = FILL_AREA_STYLE('',(#275504)); +#275504 = FILL_AREA_STYLE_COLOUR('',#272831); +#275505 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275506)); +#275506 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275507 = STYLED_ITEM('color',(#275508),#166693); +#275508 = PRESENTATION_STYLE_ASSIGNMENT((#275509)); +#275509 = SURFACE_STYLE_USAGE(.BOTH.,#275510); +#275510 = SURFACE_SIDE_STYLE('',(#275511,#275514)); +#275511 = SURFACE_STYLE_FILL_AREA(#275512); +#275512 = FILL_AREA_STYLE('',(#275513)); +#275513 = FILL_AREA_STYLE_COLOUR('',#272831); +#275514 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275515)); +#275515 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275516 = STYLED_ITEM('color',(#275517),#166737); +#275517 = PRESENTATION_STYLE_ASSIGNMENT((#275518)); +#275518 = SURFACE_STYLE_USAGE(.BOTH.,#275519); +#275519 = SURFACE_SIDE_STYLE('',(#275520,#275523)); +#275520 = SURFACE_STYLE_FILL_AREA(#275521); +#275521 = FILL_AREA_STYLE('',(#275522)); +#275522 = FILL_AREA_STYLE_COLOUR('',#272831); +#275523 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275524)); +#275524 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275525 = STYLED_ITEM('color',(#275526),#166781); +#275526 = PRESENTATION_STYLE_ASSIGNMENT((#275527)); +#275527 = SURFACE_STYLE_USAGE(.BOTH.,#275528); +#275528 = SURFACE_SIDE_STYLE('',(#275529,#275532)); +#275529 = SURFACE_STYLE_FILL_AREA(#275530); +#275530 = FILL_AREA_STYLE('',(#275531)); +#275531 = FILL_AREA_STYLE_COLOUR('',#272831); +#275532 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275533)); +#275533 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275534 = STYLED_ITEM('color',(#275535),#166825); +#275535 = PRESENTATION_STYLE_ASSIGNMENT((#275536)); +#275536 = SURFACE_STYLE_USAGE(.BOTH.,#275537); +#275537 = SURFACE_SIDE_STYLE('',(#275538,#275541)); +#275538 = SURFACE_STYLE_FILL_AREA(#275539); +#275539 = FILL_AREA_STYLE('',(#275540)); +#275540 = FILL_AREA_STYLE_COLOUR('',#272831); +#275541 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275542)); +#275542 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275543 = STYLED_ITEM('color',(#275544),#166901); +#275544 = PRESENTATION_STYLE_ASSIGNMENT((#275545)); +#275545 = SURFACE_STYLE_USAGE(.BOTH.,#275546); +#275546 = SURFACE_SIDE_STYLE('',(#275547,#275550)); +#275547 = SURFACE_STYLE_FILL_AREA(#275548); +#275548 = FILL_AREA_STYLE('',(#275549)); +#275549 = FILL_AREA_STYLE_COLOUR('',#272831); +#275550 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275551)); +#275551 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275552 = STYLED_ITEM('color',(#275553),#167043); +#275553 = PRESENTATION_STYLE_ASSIGNMENT((#275554)); +#275554 = SURFACE_STYLE_USAGE(.BOTH.,#275555); +#275555 = SURFACE_SIDE_STYLE('',(#275556,#275559)); +#275556 = SURFACE_STYLE_FILL_AREA(#275557); +#275557 = FILL_AREA_STYLE('',(#275558)); +#275558 = FILL_AREA_STYLE_COLOUR('',#272831); +#275559 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275560)); +#275560 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275561 = STYLED_ITEM('color',(#275562),#167210); +#275562 = PRESENTATION_STYLE_ASSIGNMENT((#275563)); +#275563 = SURFACE_STYLE_USAGE(.BOTH.,#275564); +#275564 = SURFACE_SIDE_STYLE('',(#275565,#275568)); +#275565 = SURFACE_STYLE_FILL_AREA(#275566); +#275566 = FILL_AREA_STYLE('',(#275567)); +#275567 = FILL_AREA_STYLE_COLOUR('',#272831); +#275568 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275569)); +#275569 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275570 = STYLED_ITEM('color',(#275571),#167403); +#275571 = PRESENTATION_STYLE_ASSIGNMENT((#275572)); +#275572 = SURFACE_STYLE_USAGE(.BOTH.,#275573); +#275573 = SURFACE_SIDE_STYLE('',(#275574,#275577)); +#275574 = SURFACE_STYLE_FILL_AREA(#275575); +#275575 = FILL_AREA_STYLE('',(#275576)); +#275576 = FILL_AREA_STYLE_COLOUR('',#272831); +#275577 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275578)); +#275578 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275579 = STYLED_ITEM('color',(#275580),#167596); +#275580 = PRESENTATION_STYLE_ASSIGNMENT((#275581)); +#275581 = SURFACE_STYLE_USAGE(.BOTH.,#275582); +#275582 = SURFACE_SIDE_STYLE('',(#275583,#275586)); +#275583 = SURFACE_STYLE_FILL_AREA(#275584); +#275584 = FILL_AREA_STYLE('',(#275585)); +#275585 = FILL_AREA_STYLE_COLOUR('',#272831); +#275586 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275587)); +#275587 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275588 = STYLED_ITEM('color',(#275589),#167790); +#275589 = PRESENTATION_STYLE_ASSIGNMENT((#275590)); +#275590 = SURFACE_STYLE_USAGE(.BOTH.,#275591); +#275591 = SURFACE_SIDE_STYLE('',(#275592,#275595)); +#275592 = SURFACE_STYLE_FILL_AREA(#275593); +#275593 = FILL_AREA_STYLE('',(#275594)); +#275594 = FILL_AREA_STYLE_COLOUR('',#272831); +#275595 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275596)); +#275596 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275597 = STYLED_ITEM('color',(#275598),#167984); +#275598 = PRESENTATION_STYLE_ASSIGNMENT((#275599)); +#275599 = SURFACE_STYLE_USAGE(.BOTH.,#275600); +#275600 = SURFACE_SIDE_STYLE('',(#275601,#275604)); +#275601 = SURFACE_STYLE_FILL_AREA(#275602); +#275602 = FILL_AREA_STYLE('',(#275603)); +#275603 = FILL_AREA_STYLE_COLOUR('',#272831); +#275604 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275605)); +#275605 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275606 = STYLED_ITEM('color',(#275607),#168178); +#275607 = PRESENTATION_STYLE_ASSIGNMENT((#275608)); +#275608 = SURFACE_STYLE_USAGE(.BOTH.,#275609); +#275609 = SURFACE_SIDE_STYLE('',(#275610,#275613)); +#275610 = SURFACE_STYLE_FILL_AREA(#275611); +#275611 = FILL_AREA_STYLE('',(#275612)); +#275612 = FILL_AREA_STYLE_COLOUR('',#272831); +#275613 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275614)); +#275614 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275615 = STYLED_ITEM('color',(#275616),#168222); +#275616 = PRESENTATION_STYLE_ASSIGNMENT((#275617)); +#275617 = SURFACE_STYLE_USAGE(.BOTH.,#275618); +#275618 = SURFACE_SIDE_STYLE('',(#275619,#275622)); +#275619 = SURFACE_STYLE_FILL_AREA(#275620); +#275620 = FILL_AREA_STYLE('',(#275621)); +#275621 = FILL_AREA_STYLE_COLOUR('',#272831); +#275622 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275623)); +#275623 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275624 = STYLED_ITEM('color',(#275625),#168266); +#275625 = PRESENTATION_STYLE_ASSIGNMENT((#275626)); +#275626 = SURFACE_STYLE_USAGE(.BOTH.,#275627); +#275627 = SURFACE_SIDE_STYLE('',(#275628,#275631)); +#275628 = SURFACE_STYLE_FILL_AREA(#275629); +#275629 = FILL_AREA_STYLE('',(#275630)); +#275630 = FILL_AREA_STYLE_COLOUR('',#272831); +#275631 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275632)); +#275632 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275633 = STYLED_ITEM('color',(#275634),#168310); +#275634 = PRESENTATION_STYLE_ASSIGNMENT((#275635)); +#275635 = SURFACE_STYLE_USAGE(.BOTH.,#275636); +#275636 = SURFACE_SIDE_STYLE('',(#275637,#275640)); +#275637 = SURFACE_STYLE_FILL_AREA(#275638); +#275638 = FILL_AREA_STYLE('',(#275639)); +#275639 = FILL_AREA_STYLE_COLOUR('',#272831); +#275640 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275641)); +#275641 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275642 = STYLED_ITEM('color',(#275643),#168354); +#275643 = PRESENTATION_STYLE_ASSIGNMENT((#275644)); +#275644 = SURFACE_STYLE_USAGE(.BOTH.,#275645); +#275645 = SURFACE_SIDE_STYLE('',(#275646,#275649)); +#275646 = SURFACE_STYLE_FILL_AREA(#275647); +#275647 = FILL_AREA_STYLE('',(#275648)); +#275648 = FILL_AREA_STYLE_COLOUR('',#272831); +#275649 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275650)); +#275650 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275651 = STYLED_ITEM('color',(#275652),#168398); +#275652 = PRESENTATION_STYLE_ASSIGNMENT((#275653)); +#275653 = SURFACE_STYLE_USAGE(.BOTH.,#275654); +#275654 = SURFACE_SIDE_STYLE('',(#275655,#275658)); +#275655 = SURFACE_STYLE_FILL_AREA(#275656); +#275656 = FILL_AREA_STYLE('',(#275657)); +#275657 = FILL_AREA_STYLE_COLOUR('',#272831); +#275658 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275659)); +#275659 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275660 = STYLED_ITEM('color',(#275661),#168442); +#275661 = PRESENTATION_STYLE_ASSIGNMENT((#275662)); +#275662 = SURFACE_STYLE_USAGE(.BOTH.,#275663); +#275663 = SURFACE_SIDE_STYLE('',(#275664,#275667)); +#275664 = SURFACE_STYLE_FILL_AREA(#275665); +#275665 = FILL_AREA_STYLE('',(#275666)); +#275666 = FILL_AREA_STYLE_COLOUR('',#272831); +#275667 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275668)); +#275668 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275669 = STYLED_ITEM('color',(#275670),#168609); +#275670 = PRESENTATION_STYLE_ASSIGNMENT((#275671)); +#275671 = SURFACE_STYLE_USAGE(.BOTH.,#275672); +#275672 = SURFACE_SIDE_STYLE('',(#275673,#275676)); +#275673 = SURFACE_STYLE_FILL_AREA(#275674); +#275674 = FILL_AREA_STYLE('',(#275675)); +#275675 = FILL_AREA_STYLE_COLOUR('',#272831); +#275676 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275677)); +#275677 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275678 = STYLED_ITEM('color',(#275679),#168735); +#275679 = PRESENTATION_STYLE_ASSIGNMENT((#275680)); +#275680 = SURFACE_STYLE_USAGE(.BOTH.,#275681); +#275681 = SURFACE_SIDE_STYLE('',(#275682,#275685)); +#275682 = SURFACE_STYLE_FILL_AREA(#275683); +#275683 = FILL_AREA_STYLE('',(#275684)); +#275684 = FILL_AREA_STYLE_COLOUR('',#272831); +#275685 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275686)); +#275686 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275687 = STYLED_ITEM('color',(#275688),#168942); +#275688 = PRESENTATION_STYLE_ASSIGNMENT((#275689)); +#275689 = SURFACE_STYLE_USAGE(.BOTH.,#275690); +#275690 = SURFACE_SIDE_STYLE('',(#275691,#275694)); +#275691 = SURFACE_STYLE_FILL_AREA(#275692); +#275692 = FILL_AREA_STYLE('',(#275693)); +#275693 = FILL_AREA_STYLE_COLOUR('',#272831); +#275694 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275695)); +#275695 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275696 = STYLED_ITEM('color',(#275697),#169136); +#275697 = PRESENTATION_STYLE_ASSIGNMENT((#275698)); +#275698 = SURFACE_STYLE_USAGE(.BOTH.,#275699); +#275699 = SURFACE_SIDE_STYLE('',(#275700,#275703)); +#275700 = SURFACE_STYLE_FILL_AREA(#275701); +#275701 = FILL_AREA_STYLE('',(#275702)); +#275702 = FILL_AREA_STYLE_COLOUR('',#272831); +#275703 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275704)); +#275704 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275705 = STYLED_ITEM('color',(#275706),#169314); +#275706 = PRESENTATION_STYLE_ASSIGNMENT((#275707)); +#275707 = SURFACE_STYLE_USAGE(.BOTH.,#275708); +#275708 = SURFACE_SIDE_STYLE('',(#275709,#275712)); +#275709 = SURFACE_STYLE_FILL_AREA(#275710); +#275710 = FILL_AREA_STYLE('',(#275711)); +#275711 = FILL_AREA_STYLE_COLOUR('',#272831); +#275712 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275713)); +#275713 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275714 = STYLED_ITEM('color',(#275715),#169496); +#275715 = PRESENTATION_STYLE_ASSIGNMENT((#275716)); +#275716 = SURFACE_STYLE_USAGE(.BOTH.,#275717); +#275717 = SURFACE_SIDE_STYLE('',(#275718,#275721)); +#275718 = SURFACE_STYLE_FILL_AREA(#275719); +#275719 = FILL_AREA_STYLE('',(#275720)); +#275720 = FILL_AREA_STYLE_COLOUR('',#272831); +#275721 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275722)); +#275722 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275723 = STYLED_ITEM('color',(#275724),#169678); +#275724 = PRESENTATION_STYLE_ASSIGNMENT((#275725)); +#275725 = SURFACE_STYLE_USAGE(.BOTH.,#275726); +#275726 = SURFACE_SIDE_STYLE('',(#275727,#275730)); +#275727 = SURFACE_STYLE_FILL_AREA(#275728); +#275728 = FILL_AREA_STYLE('',(#275729)); +#275729 = FILL_AREA_STYLE_COLOUR('',#272831); +#275730 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275731)); +#275731 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275732 = STYLED_ITEM('color',(#275733),#169820); +#275733 = PRESENTATION_STYLE_ASSIGNMENT((#275734)); +#275734 = SURFACE_STYLE_USAGE(.BOTH.,#275735); +#275735 = SURFACE_SIDE_STYLE('',(#275736,#275739)); +#275736 = SURFACE_STYLE_FILL_AREA(#275737); +#275737 = FILL_AREA_STYLE('',(#275738)); +#275738 = FILL_AREA_STYLE_COLOUR('',#272831); +#275739 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275740)); +#275740 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275741 = STYLED_ITEM('color',(#275742),#169987); +#275742 = PRESENTATION_STYLE_ASSIGNMENT((#275743)); +#275743 = SURFACE_STYLE_USAGE(.BOTH.,#275744); +#275744 = SURFACE_SIDE_STYLE('',(#275745,#275748)); +#275745 = SURFACE_STYLE_FILL_AREA(#275746); +#275746 = FILL_AREA_STYLE('',(#275747)); +#275747 = FILL_AREA_STYLE_COLOUR('',#272831); +#275748 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275749)); +#275749 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275750 = STYLED_ITEM('color',(#275751),#170158); +#275751 = PRESENTATION_STYLE_ASSIGNMENT((#275752)); +#275752 = SURFACE_STYLE_USAGE(.BOTH.,#275753); +#275753 = SURFACE_SIDE_STYLE('',(#275754,#275757)); +#275754 = SURFACE_STYLE_FILL_AREA(#275755); +#275755 = FILL_AREA_STYLE('',(#275756)); +#275756 = FILL_AREA_STYLE_COLOUR('',#272831); +#275757 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275758)); +#275758 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275759 = STYLED_ITEM('color',(#275760),#170329); +#275760 = PRESENTATION_STYLE_ASSIGNMENT((#275761)); +#275761 = SURFACE_STYLE_USAGE(.BOTH.,#275762); +#275762 = SURFACE_SIDE_STYLE('',(#275763,#275766)); +#275763 = SURFACE_STYLE_FILL_AREA(#275764); +#275764 = FILL_AREA_STYLE('',(#275765)); +#275765 = FILL_AREA_STYLE_COLOUR('',#272831); +#275766 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275767)); +#275767 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275768 = STYLED_ITEM('color',(#275769),#170500); +#275769 = PRESENTATION_STYLE_ASSIGNMENT((#275770)); +#275770 = SURFACE_STYLE_USAGE(.BOTH.,#275771); +#275771 = SURFACE_SIDE_STYLE('',(#275772,#275775)); +#275772 = SURFACE_STYLE_FILL_AREA(#275773); +#275773 = FILL_AREA_STYLE('',(#275774)); +#275774 = FILL_AREA_STYLE_COLOUR('',#272831); +#275775 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275776)); +#275776 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275777 = STYLED_ITEM('color',(#275778),#170671); +#275778 = PRESENTATION_STYLE_ASSIGNMENT((#275779)); +#275779 = SURFACE_STYLE_USAGE(.BOTH.,#275780); +#275780 = SURFACE_SIDE_STYLE('',(#275781,#275784)); +#275781 = SURFACE_STYLE_FILL_AREA(#275782); +#275782 = FILL_AREA_STYLE('',(#275783)); +#275783 = FILL_AREA_STYLE_COLOUR('',#272831); +#275784 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275785)); +#275785 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275786 = STYLED_ITEM('color',(#275787),#170842); +#275787 = PRESENTATION_STYLE_ASSIGNMENT((#275788)); +#275788 = SURFACE_STYLE_USAGE(.BOTH.,#275789); +#275789 = SURFACE_SIDE_STYLE('',(#275790,#275793)); +#275790 = SURFACE_STYLE_FILL_AREA(#275791); +#275791 = FILL_AREA_STYLE('',(#275792)); +#275792 = FILL_AREA_STYLE_COLOUR('',#272831); +#275793 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275794)); +#275794 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275795 = STYLED_ITEM('color',(#275796),#171013); +#275796 = PRESENTATION_STYLE_ASSIGNMENT((#275797)); +#275797 = SURFACE_STYLE_USAGE(.BOTH.,#275798); +#275798 = SURFACE_SIDE_STYLE('',(#275799,#275802)); +#275799 = SURFACE_STYLE_FILL_AREA(#275800); +#275800 = FILL_AREA_STYLE('',(#275801)); +#275801 = FILL_AREA_STYLE_COLOUR('',#272831); +#275802 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275803)); +#275803 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275804 = STYLED_ITEM('color',(#275805),#171306); +#275805 = PRESENTATION_STYLE_ASSIGNMENT((#275806)); +#275806 = SURFACE_STYLE_USAGE(.BOTH.,#275807); +#275807 = SURFACE_SIDE_STYLE('',(#275808,#275811)); +#275808 = SURFACE_STYLE_FILL_AREA(#275809); +#275809 = FILL_AREA_STYLE('',(#275810)); +#275810 = FILL_AREA_STYLE_COLOUR('',#272831); +#275811 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275812)); +#275812 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275813 = STYLED_ITEM('color',(#275814),#171509); +#275814 = PRESENTATION_STYLE_ASSIGNMENT((#275815)); +#275815 = SURFACE_STYLE_USAGE(.BOTH.,#275816); +#275816 = SURFACE_SIDE_STYLE('',(#275817,#275820)); +#275817 = SURFACE_STYLE_FILL_AREA(#275818); +#275818 = FILL_AREA_STYLE('',(#275819)); +#275819 = FILL_AREA_STYLE_COLOUR('',#272831); +#275820 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275821)); +#275821 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275822 = STYLED_ITEM('color',(#275823),#171712); +#275823 = PRESENTATION_STYLE_ASSIGNMENT((#275824)); +#275824 = SURFACE_STYLE_USAGE(.BOTH.,#275825); +#275825 = SURFACE_SIDE_STYLE('',(#275826,#275829)); +#275826 = SURFACE_STYLE_FILL_AREA(#275827); +#275827 = FILL_AREA_STYLE('',(#275828)); +#275828 = FILL_AREA_STYLE_COLOUR('',#272831); +#275829 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275830)); +#275830 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275831 = STYLED_ITEM('color',(#275832),#171915); +#275832 = PRESENTATION_STYLE_ASSIGNMENT((#275833)); +#275833 = SURFACE_STYLE_USAGE(.BOTH.,#275834); +#275834 = SURFACE_SIDE_STYLE('',(#275835,#275838)); +#275835 = SURFACE_STYLE_FILL_AREA(#275836); +#275836 = FILL_AREA_STYLE('',(#275837)); +#275837 = FILL_AREA_STYLE_COLOUR('',#272831); +#275838 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275839)); +#275839 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275840 = STYLED_ITEM('color',(#275841),#172127); +#275841 = PRESENTATION_STYLE_ASSIGNMENT((#275842)); +#275842 = SURFACE_STYLE_USAGE(.BOTH.,#275843); +#275843 = SURFACE_SIDE_STYLE('',(#275844,#275847)); +#275844 = SURFACE_STYLE_FILL_AREA(#275845); +#275845 = FILL_AREA_STYLE('',(#275846)); +#275846 = FILL_AREA_STYLE_COLOUR('',#272831); +#275847 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275848)); +#275848 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275849 = STYLED_ITEM('color',(#275850),#172348); +#275850 = PRESENTATION_STYLE_ASSIGNMENT((#275851)); +#275851 = SURFACE_STYLE_USAGE(.BOTH.,#275852); +#275852 = SURFACE_SIDE_STYLE('',(#275853,#275856)); +#275853 = SURFACE_STYLE_FILL_AREA(#275854); +#275854 = FILL_AREA_STYLE('',(#275855)); +#275855 = FILL_AREA_STYLE_COLOUR('',#272831); +#275856 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275857)); +#275857 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275858 = STYLED_ITEM('color',(#275859),#172560); +#275859 = PRESENTATION_STYLE_ASSIGNMENT((#275860)); +#275860 = SURFACE_STYLE_USAGE(.BOTH.,#275861); +#275861 = SURFACE_SIDE_STYLE('',(#275862,#275865)); +#275862 = SURFACE_STYLE_FILL_AREA(#275863); +#275863 = FILL_AREA_STYLE('',(#275864)); +#275864 = FILL_AREA_STYLE_COLOUR('',#272831); +#275865 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275866)); +#275866 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275867 = STYLED_ITEM('color',(#275868),#172647); +#275868 = PRESENTATION_STYLE_ASSIGNMENT((#275869)); +#275869 = SURFACE_STYLE_USAGE(.BOTH.,#275870); +#275870 = SURFACE_SIDE_STYLE('',(#275871,#275874)); +#275871 = SURFACE_STYLE_FILL_AREA(#275872); +#275872 = FILL_AREA_STYLE('',(#275873)); +#275873 = FILL_AREA_STYLE_COLOUR('',#272831); +#275874 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275875)); +#275875 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275876 = STYLED_ITEM('color',(#275877),#172867); +#275877 = PRESENTATION_STYLE_ASSIGNMENT((#275878)); +#275878 = SURFACE_STYLE_USAGE(.BOTH.,#275879); +#275879 = SURFACE_SIDE_STYLE('',(#275880,#275883)); +#275880 = SURFACE_STYLE_FILL_AREA(#275881); +#275881 = FILL_AREA_STYLE('',(#275882)); +#275882 = FILL_AREA_STYLE_COLOUR('',#272831); +#275883 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275884)); +#275884 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275885 = STYLED_ITEM('color',(#275886),#172911); +#275886 = PRESENTATION_STYLE_ASSIGNMENT((#275887)); +#275887 = SURFACE_STYLE_USAGE(.BOTH.,#275888); +#275888 = SURFACE_SIDE_STYLE('',(#275889,#275892)); +#275889 = SURFACE_STYLE_FILL_AREA(#275890); +#275890 = FILL_AREA_STYLE('',(#275891)); +#275891 = FILL_AREA_STYLE_COLOUR('',#272831); +#275892 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275893)); +#275893 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275894 = STYLED_ITEM('color',(#275895),#173005); +#275895 = PRESENTATION_STYLE_ASSIGNMENT((#275896)); +#275896 = SURFACE_STYLE_USAGE(.BOTH.,#275897); +#275897 = SURFACE_SIDE_STYLE('',(#275898,#275901)); +#275898 = SURFACE_STYLE_FILL_AREA(#275899); +#275899 = FILL_AREA_STYLE('',(#275900)); +#275900 = FILL_AREA_STYLE_COLOUR('',#272831); +#275901 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275902)); +#275902 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275903 = STYLED_ITEM('color',(#275904),#173049); +#275904 = PRESENTATION_STYLE_ASSIGNMENT((#275905)); +#275905 = SURFACE_STYLE_USAGE(.BOTH.,#275906); +#275906 = SURFACE_SIDE_STYLE('',(#275907,#275910)); +#275907 = SURFACE_STYLE_FILL_AREA(#275908); +#275908 = FILL_AREA_STYLE('',(#275909)); +#275909 = FILL_AREA_STYLE_COLOUR('',#272831); +#275910 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275911)); +#275911 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275912 = STYLED_ITEM('color',(#275913),#173093); +#275913 = PRESENTATION_STYLE_ASSIGNMENT((#275914)); +#275914 = SURFACE_STYLE_USAGE(.BOTH.,#275915); +#275915 = SURFACE_SIDE_STYLE('',(#275916,#275919)); +#275916 = SURFACE_STYLE_FILL_AREA(#275917); +#275917 = FILL_AREA_STYLE('',(#275918)); +#275918 = FILL_AREA_STYLE_COLOUR('',#272831); +#275919 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275920)); +#275920 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275921 = STYLED_ITEM('color',(#275922),#173264); +#275922 = PRESENTATION_STYLE_ASSIGNMENT((#275923)); +#275923 = SURFACE_STYLE_USAGE(.BOTH.,#275924); +#275924 = SURFACE_SIDE_STYLE('',(#275925,#275928)); +#275925 = SURFACE_STYLE_FILL_AREA(#275926); +#275926 = FILL_AREA_STYLE('',(#275927)); +#275927 = FILL_AREA_STYLE_COLOUR('',#272831); +#275928 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275929)); +#275929 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275930 = STYLED_ITEM('color',(#275931),#173333); +#275931 = PRESENTATION_STYLE_ASSIGNMENT((#275932)); +#275932 = SURFACE_STYLE_USAGE(.BOTH.,#275933); +#275933 = SURFACE_SIDE_STYLE('',(#275934,#275937)); +#275934 = SURFACE_STYLE_FILL_AREA(#275935); +#275935 = FILL_AREA_STYLE('',(#275936)); +#275936 = FILL_AREA_STYLE_COLOUR('',#272831); +#275937 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275938)); +#275938 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275939 = STYLED_ITEM('color',(#275940),#173577); +#275940 = PRESENTATION_STYLE_ASSIGNMENT((#275941)); +#275941 = SURFACE_STYLE_USAGE(.BOTH.,#275942); +#275942 = SURFACE_SIDE_STYLE('',(#275943,#275946)); +#275943 = SURFACE_STYLE_FILL_AREA(#275944); +#275944 = FILL_AREA_STYLE('',(#275945)); +#275945 = FILL_AREA_STYLE_COLOUR('',#272831); +#275946 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275947)); +#275947 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275948 = STYLED_ITEM('color',(#275949),#173744); +#275949 = PRESENTATION_STYLE_ASSIGNMENT((#275950)); +#275950 = SURFACE_STYLE_USAGE(.BOTH.,#275951); +#275951 = SURFACE_SIDE_STYLE('',(#275952,#275955)); +#275952 = SURFACE_STYLE_FILL_AREA(#275953); +#275953 = FILL_AREA_STYLE('',(#275954)); +#275954 = FILL_AREA_STYLE_COLOUR('',#272831); +#275955 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275956)); +#275956 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275957 = STYLED_ITEM('color',(#275958),#173984); +#275958 = PRESENTATION_STYLE_ASSIGNMENT((#275959)); +#275959 = SURFACE_STYLE_USAGE(.BOTH.,#275960); +#275960 = SURFACE_SIDE_STYLE('',(#275961,#275964)); +#275961 = SURFACE_STYLE_FILL_AREA(#275962); +#275962 = FILL_AREA_STYLE('',(#275963)); +#275963 = FILL_AREA_STYLE_COLOUR('',#272831); +#275964 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275965)); +#275965 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275966 = STYLED_ITEM('color',(#275967),#174078); +#275967 = PRESENTATION_STYLE_ASSIGNMENT((#275968)); +#275968 = SURFACE_STYLE_USAGE(.BOTH.,#275969); +#275969 = SURFACE_SIDE_STYLE('',(#275970,#275973)); +#275970 = SURFACE_STYLE_FILL_AREA(#275971); +#275971 = FILL_AREA_STYLE('',(#275972)); +#275972 = FILL_AREA_STYLE_COLOUR('',#272831); +#275973 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275974)); +#275974 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275975 = STYLED_ITEM('color',(#275976),#174216); +#275976 = PRESENTATION_STYLE_ASSIGNMENT((#275977)); +#275977 = SURFACE_STYLE_USAGE(.BOTH.,#275978); +#275978 = SURFACE_SIDE_STYLE('',(#275979,#275982)); +#275979 = SURFACE_STYLE_FILL_AREA(#275980); +#275980 = FILL_AREA_STYLE('',(#275981)); +#275981 = FILL_AREA_STYLE_COLOUR('',#272831); +#275982 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275983)); +#275983 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275984 = STYLED_ITEM('color',(#275985),#174359); +#275985 = PRESENTATION_STYLE_ASSIGNMENT((#275986)); +#275986 = SURFACE_STYLE_USAGE(.BOTH.,#275987); +#275987 = SURFACE_SIDE_STYLE('',(#275988,#275991)); +#275988 = SURFACE_STYLE_FILL_AREA(#275989); +#275989 = FILL_AREA_STYLE('',(#275990)); +#275990 = FILL_AREA_STYLE_COLOUR('',#272831); +#275991 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#275992)); +#275992 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#275993 = STYLED_ITEM('color',(#275994),#174436); +#275994 = PRESENTATION_STYLE_ASSIGNMENT((#275995)); +#275995 = SURFACE_STYLE_USAGE(.BOTH.,#275996); +#275996 = SURFACE_SIDE_STYLE('',(#275997,#276000)); +#275997 = SURFACE_STYLE_FILL_AREA(#275998); +#275998 = FILL_AREA_STYLE('',(#275999)); +#275999 = FILL_AREA_STYLE_COLOUR('',#272831); +#276000 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276001)); +#276001 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276002 = STYLED_ITEM('color',(#276003),#174538); +#276003 = PRESENTATION_STYLE_ASSIGNMENT((#276004)); +#276004 = SURFACE_STYLE_USAGE(.BOTH.,#276005); +#276005 = SURFACE_SIDE_STYLE('',(#276006,#276009)); +#276006 = SURFACE_STYLE_FILL_AREA(#276007); +#276007 = FILL_AREA_STYLE('',(#276008)); +#276008 = FILL_AREA_STYLE_COLOUR('',#272831); +#276009 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276010)); +#276010 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276011 = STYLED_ITEM('color',(#276012),#174986); +#276012 = PRESENTATION_STYLE_ASSIGNMENT((#276013)); +#276013 = SURFACE_STYLE_USAGE(.BOTH.,#276014); +#276014 = SURFACE_SIDE_STYLE('',(#276015,#276018)); +#276015 = SURFACE_STYLE_FILL_AREA(#276016); +#276016 = FILL_AREA_STYLE('',(#276017)); +#276017 = FILL_AREA_STYLE_COLOUR('',#272831); +#276018 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276019)); +#276019 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276020 = STYLED_ITEM('color',(#276021),#175030); +#276021 = PRESENTATION_STYLE_ASSIGNMENT((#276022)); +#276022 = SURFACE_STYLE_USAGE(.BOTH.,#276023); +#276023 = SURFACE_SIDE_STYLE('',(#276024,#276027)); +#276024 = SURFACE_STYLE_FILL_AREA(#276025); +#276025 = FILL_AREA_STYLE('',(#276026)); +#276026 = FILL_AREA_STYLE_COLOUR('',#272831); +#276027 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276028)); +#276028 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276029 = STYLED_ITEM('color',(#276030),#175223); +#276030 = PRESENTATION_STYLE_ASSIGNMENT((#276031)); +#276031 = SURFACE_STYLE_USAGE(.BOTH.,#276032); +#276032 = SURFACE_SIDE_STYLE('',(#276033,#276036)); +#276033 = SURFACE_STYLE_FILL_AREA(#276034); +#276034 = FILL_AREA_STYLE('',(#276035)); +#276035 = FILL_AREA_STYLE_COLOUR('',#272831); +#276036 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276037)); +#276037 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276038 = STYLED_ITEM('color',(#276039),#175267); +#276039 = PRESENTATION_STYLE_ASSIGNMENT((#276040)); +#276040 = SURFACE_STYLE_USAGE(.BOTH.,#276041); +#276041 = SURFACE_SIDE_STYLE('',(#276042,#276045)); +#276042 = SURFACE_STYLE_FILL_AREA(#276043); +#276043 = FILL_AREA_STYLE('',(#276044)); +#276044 = FILL_AREA_STYLE_COLOUR('',#272831); +#276045 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276046)); +#276046 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276047 = STYLED_ITEM('color',(#276048),#175530); +#276048 = PRESENTATION_STYLE_ASSIGNMENT((#276049)); +#276049 = SURFACE_STYLE_USAGE(.BOTH.,#276050); +#276050 = SURFACE_SIDE_STYLE('',(#276051,#276054)); +#276051 = SURFACE_STYLE_FILL_AREA(#276052); +#276052 = FILL_AREA_STYLE('',(#276053)); +#276053 = FILL_AREA_STYLE_COLOUR('',#272831); +#276054 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276055)); +#276055 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276056 = STYLED_ITEM('color',(#276057),#175723); +#276057 = PRESENTATION_STYLE_ASSIGNMENT((#276058)); +#276058 = SURFACE_STYLE_USAGE(.BOTH.,#276059); +#276059 = SURFACE_SIDE_STYLE('',(#276060,#276063)); +#276060 = SURFACE_STYLE_FILL_AREA(#276061); +#276061 = FILL_AREA_STYLE('',(#276062)); +#276062 = FILL_AREA_STYLE_COLOUR('',#272831); +#276063 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276064)); +#276064 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276065 = STYLED_ITEM('color',(#276066),#175917); +#276066 = PRESENTATION_STYLE_ASSIGNMENT((#276067)); +#276067 = SURFACE_STYLE_USAGE(.BOTH.,#276068); +#276068 = SURFACE_SIDE_STYLE('',(#276069,#276072)); +#276069 = SURFACE_STYLE_FILL_AREA(#276070); +#276070 = FILL_AREA_STYLE('',(#276071)); +#276071 = FILL_AREA_STYLE_COLOUR('',#272831); +#276072 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276073)); +#276073 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276074 = STYLED_ITEM('color',(#276075),#176129); +#276075 = PRESENTATION_STYLE_ASSIGNMENT((#276076)); +#276076 = SURFACE_STYLE_USAGE(.BOTH.,#276077); +#276077 = SURFACE_SIDE_STYLE('',(#276078,#276081)); +#276078 = SURFACE_STYLE_FILL_AREA(#276079); +#276079 = FILL_AREA_STYLE('',(#276080)); +#276080 = FILL_AREA_STYLE_COLOUR('',#272831); +#276081 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276082)); +#276082 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276083 = STYLED_ITEM('color',(#276084),#176173); +#276084 = PRESENTATION_STYLE_ASSIGNMENT((#276085)); +#276085 = SURFACE_STYLE_USAGE(.BOTH.,#276086); +#276086 = SURFACE_SIDE_STYLE('',(#276087,#276090)); +#276087 = SURFACE_STYLE_FILL_AREA(#276088); +#276088 = FILL_AREA_STYLE('',(#276089)); +#276089 = FILL_AREA_STYLE_COLOUR('',#272831); +#276090 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276091)); +#276091 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276092 = STYLED_ITEM('color',(#276093),#176250); +#276093 = PRESENTATION_STYLE_ASSIGNMENT((#276094)); +#276094 = SURFACE_STYLE_USAGE(.BOTH.,#276095); +#276095 = SURFACE_SIDE_STYLE('',(#276096,#276099)); +#276096 = SURFACE_STYLE_FILL_AREA(#276097); +#276097 = FILL_AREA_STYLE('',(#276098)); +#276098 = FILL_AREA_STYLE_COLOUR('',#272831); +#276099 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276100)); +#276100 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276101 = STYLED_ITEM('color',(#276102),#176327); +#276102 = PRESENTATION_STYLE_ASSIGNMENT((#276103)); +#276103 = SURFACE_STYLE_USAGE(.BOTH.,#276104); +#276104 = SURFACE_SIDE_STYLE('',(#276105,#276108)); +#276105 = SURFACE_STYLE_FILL_AREA(#276106); +#276106 = FILL_AREA_STYLE('',(#276107)); +#276107 = FILL_AREA_STYLE_COLOUR('',#272831); +#276108 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276109)); +#276109 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276110 = STYLED_ITEM('color',(#276111),#176371); +#276111 = PRESENTATION_STYLE_ASSIGNMENT((#276112)); +#276112 = SURFACE_STYLE_USAGE(.BOTH.,#276113); +#276113 = SURFACE_SIDE_STYLE('',(#276114,#276117)); +#276114 = SURFACE_STYLE_FILL_AREA(#276115); +#276115 = FILL_AREA_STYLE('',(#276116)); +#276116 = FILL_AREA_STYLE_COLOUR('',#272831); +#276117 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276118)); +#276118 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276119 = STYLED_ITEM('color',(#276120),#176423); +#276120 = PRESENTATION_STYLE_ASSIGNMENT((#276121)); +#276121 = SURFACE_STYLE_USAGE(.BOTH.,#276122); +#276122 = SURFACE_SIDE_STYLE('',(#276123,#276126)); +#276123 = SURFACE_STYLE_FILL_AREA(#276124); +#276124 = FILL_AREA_STYLE('',(#276125)); +#276125 = FILL_AREA_STYLE_COLOUR('',#272831); +#276126 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276127)); +#276127 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276128 = STYLED_ITEM('color',(#276129),#176574); +#276129 = PRESENTATION_STYLE_ASSIGNMENT((#276130)); +#276130 = SURFACE_STYLE_USAGE(.BOTH.,#276131); +#276131 = SURFACE_SIDE_STYLE('',(#276132,#276135)); +#276132 = SURFACE_STYLE_FILL_AREA(#276133); +#276133 = FILL_AREA_STYLE('',(#276134)); +#276134 = FILL_AREA_STYLE_COLOUR('',#272831); +#276135 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276136)); +#276136 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276137 = STYLED_ITEM('color',(#276138),#176626); +#276138 = PRESENTATION_STYLE_ASSIGNMENT((#276139)); +#276139 = SURFACE_STYLE_USAGE(.BOTH.,#276140); +#276140 = SURFACE_SIDE_STYLE('',(#276141,#276144)); +#276141 = SURFACE_STYLE_FILL_AREA(#276142); +#276142 = FILL_AREA_STYLE('',(#276143)); +#276143 = FILL_AREA_STYLE_COLOUR('',#272831); +#276144 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276145)); +#276145 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276146 = STYLED_ITEM('color',(#276147),#176678); +#276147 = PRESENTATION_STYLE_ASSIGNMENT((#276148)); +#276148 = SURFACE_STYLE_USAGE(.BOTH.,#276149); +#276149 = SURFACE_SIDE_STYLE('',(#276150,#276153)); +#276150 = SURFACE_STYLE_FILL_AREA(#276151); +#276151 = FILL_AREA_STYLE('',(#276152)); +#276152 = FILL_AREA_STYLE_COLOUR('',#272831); +#276153 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276154)); +#276154 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276155 = STYLED_ITEM('color',(#276156),#176820); +#276156 = PRESENTATION_STYLE_ASSIGNMENT((#276157)); +#276157 = SURFACE_STYLE_USAGE(.BOTH.,#276158); +#276158 = SURFACE_SIDE_STYLE('',(#276159,#276162)); +#276159 = SURFACE_STYLE_FILL_AREA(#276160); +#276160 = FILL_AREA_STYLE('',(#276161)); +#276161 = FILL_AREA_STYLE_COLOUR('',#272831); +#276162 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276163)); +#276163 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276164 = STYLED_ITEM('color',(#276165),#177013); +#276165 = PRESENTATION_STYLE_ASSIGNMENT((#276166)); +#276166 = SURFACE_STYLE_USAGE(.BOTH.,#276167); +#276167 = SURFACE_SIDE_STYLE('',(#276168,#276171)); +#276168 = SURFACE_STYLE_FILL_AREA(#276169); +#276169 = FILL_AREA_STYLE('',(#276170)); +#276170 = FILL_AREA_STYLE_COLOUR('',#272831); +#276171 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276172)); +#276172 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276173 = STYLED_ITEM('color',(#276174),#177207); +#276174 = PRESENTATION_STYLE_ASSIGNMENT((#276175)); +#276175 = SURFACE_STYLE_USAGE(.BOTH.,#276176); +#276176 = SURFACE_SIDE_STYLE('',(#276177,#276180)); +#276177 = SURFACE_STYLE_FILL_AREA(#276178); +#276178 = FILL_AREA_STYLE('',(#276179)); +#276179 = FILL_AREA_STYLE_COLOUR('',#272831); +#276180 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276181)); +#276181 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276182 = STYLED_ITEM('color',(#276183),#177294); +#276183 = PRESENTATION_STYLE_ASSIGNMENT((#276184)); +#276184 = SURFACE_STYLE_USAGE(.BOTH.,#276185); +#276185 = SURFACE_SIDE_STYLE('',(#276186,#276189)); +#276186 = SURFACE_STYLE_FILL_AREA(#276187); +#276187 = FILL_AREA_STYLE('',(#276188)); +#276188 = FILL_AREA_STYLE_COLOUR('',#272831); +#276189 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276190)); +#276190 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276191 = STYLED_ITEM('color',(#276192),#177362); +#276192 = PRESENTATION_STYLE_ASSIGNMENT((#276193)); +#276193 = SURFACE_STYLE_USAGE(.BOTH.,#276194); +#276194 = SURFACE_SIDE_STYLE('',(#276195,#276198)); +#276195 = SURFACE_STYLE_FILL_AREA(#276196); +#276196 = FILL_AREA_STYLE('',(#276197)); +#276197 = FILL_AREA_STYLE_COLOUR('',#272831); +#276198 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276199)); +#276199 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276200 = STYLED_ITEM('color',(#276201),#177406); +#276201 = PRESENTATION_STYLE_ASSIGNMENT((#276202)); +#276202 = SURFACE_STYLE_USAGE(.BOTH.,#276203); +#276203 = SURFACE_SIDE_STYLE('',(#276204,#276207)); +#276204 = SURFACE_STYLE_FILL_AREA(#276205); +#276205 = FILL_AREA_STYLE('',(#276206)); +#276206 = FILL_AREA_STYLE_COLOUR('',#272831); +#276207 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276208)); +#276208 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276209 = STYLED_ITEM('color',(#276210),#177626); +#276210 = PRESENTATION_STYLE_ASSIGNMENT((#276211)); +#276211 = SURFACE_STYLE_USAGE(.BOTH.,#276212); +#276212 = SURFACE_SIDE_STYLE('',(#276213,#276216)); +#276213 = SURFACE_STYLE_FILL_AREA(#276214); +#276214 = FILL_AREA_STYLE('',(#276215)); +#276215 = FILL_AREA_STYLE_COLOUR('',#272831); +#276216 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276217)); +#276217 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276218 = STYLED_ITEM('color',(#276219),#177720); +#276219 = PRESENTATION_STYLE_ASSIGNMENT((#276220)); +#276220 = SURFACE_STYLE_USAGE(.BOTH.,#276221); +#276221 = SURFACE_SIDE_STYLE('',(#276222,#276225)); +#276222 = SURFACE_STYLE_FILL_AREA(#276223); +#276223 = FILL_AREA_STYLE('',(#276224)); +#276224 = FILL_AREA_STYLE_COLOUR('',#272831); +#276225 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276226)); +#276226 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276227 = STYLED_ITEM('color',(#276228),#177932); +#276228 = PRESENTATION_STYLE_ASSIGNMENT((#276229)); +#276229 = SURFACE_STYLE_USAGE(.BOTH.,#276230); +#276230 = SURFACE_SIDE_STYLE('',(#276231,#276234)); +#276231 = SURFACE_STYLE_FILL_AREA(#276232); +#276232 = FILL_AREA_STYLE('',(#276233)); +#276233 = FILL_AREA_STYLE_COLOUR('',#272831); +#276234 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276235)); +#276235 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276236 = STYLED_ITEM('color',(#276237),#177976); +#276237 = PRESENTATION_STYLE_ASSIGNMENT((#276238)); +#276238 = SURFACE_STYLE_USAGE(.BOTH.,#276239); +#276239 = SURFACE_SIDE_STYLE('',(#276240,#276243)); +#276240 = SURFACE_STYLE_FILL_AREA(#276241); +#276241 = FILL_AREA_STYLE('',(#276242)); +#276242 = FILL_AREA_STYLE_COLOUR('',#272831); +#276243 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276244)); +#276244 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276245 = STYLED_ITEM('color',(#276246),#178154); +#276246 = PRESENTATION_STYLE_ASSIGNMENT((#276247)); +#276247 = SURFACE_STYLE_USAGE(.BOTH.,#276248); +#276248 = SURFACE_SIDE_STYLE('',(#276249,#276252)); +#276249 = SURFACE_STYLE_FILL_AREA(#276250); +#276250 = FILL_AREA_STYLE('',(#276251)); +#276251 = FILL_AREA_STYLE_COLOUR('',#272831); +#276252 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276253)); +#276253 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276254 = STYLED_ITEM('color',(#276255),#178256); +#276255 = PRESENTATION_STYLE_ASSIGNMENT((#276256)); +#276256 = SURFACE_STYLE_USAGE(.BOTH.,#276257); +#276257 = SURFACE_SIDE_STYLE('',(#276258,#276261)); +#276258 = SURFACE_STYLE_FILL_AREA(#276259); +#276259 = FILL_AREA_STYLE('',(#276260)); +#276260 = FILL_AREA_STYLE_COLOUR('',#272831); +#276261 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276262)); +#276262 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276263 = STYLED_ITEM('color',(#276264),#178449); +#276264 = PRESENTATION_STYLE_ASSIGNMENT((#276265)); +#276265 = SURFACE_STYLE_USAGE(.BOTH.,#276266); +#276266 = SURFACE_SIDE_STYLE('',(#276267,#276270)); +#276267 = SURFACE_STYLE_FILL_AREA(#276268); +#276268 = FILL_AREA_STYLE('',(#276269)); +#276269 = FILL_AREA_STYLE_COLOUR('',#272831); +#276270 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276271)); +#276271 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276272 = STYLED_ITEM('color',(#276273),#178643); +#276273 = PRESENTATION_STYLE_ASSIGNMENT((#276274)); +#276274 = SURFACE_STYLE_USAGE(.BOTH.,#276275); +#276275 = SURFACE_SIDE_STYLE('',(#276276,#276279)); +#276276 = SURFACE_STYLE_FILL_AREA(#276277); +#276277 = FILL_AREA_STYLE('',(#276278)); +#276278 = FILL_AREA_STYLE_COLOUR('',#272831); +#276279 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276280)); +#276280 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276281 = STYLED_ITEM('color',(#276282),#178846); +#276282 = PRESENTATION_STYLE_ASSIGNMENT((#276283)); +#276283 = SURFACE_STYLE_USAGE(.BOTH.,#276284); +#276284 = SURFACE_SIDE_STYLE('',(#276285,#276288)); +#276285 = SURFACE_STYLE_FILL_AREA(#276286); +#276286 = FILL_AREA_STYLE('',(#276287)); +#276287 = FILL_AREA_STYLE_COLOUR('',#272831); +#276288 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276289)); +#276289 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276290 = STYLED_ITEM('color',(#276291),#179024); +#276291 = PRESENTATION_STYLE_ASSIGNMENT((#276292)); +#276292 = SURFACE_STYLE_USAGE(.BOTH.,#276293); +#276293 = SURFACE_SIDE_STYLE('',(#276294,#276297)); +#276294 = SURFACE_STYLE_FILL_AREA(#276295); +#276295 = FILL_AREA_STYLE('',(#276296)); +#276296 = FILL_AREA_STYLE_COLOUR('',#272831); +#276297 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276298)); +#276298 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276299 = STYLED_ITEM('color',(#276300),#179068); +#276300 = PRESENTATION_STYLE_ASSIGNMENT((#276301)); +#276301 = SURFACE_STYLE_USAGE(.BOTH.,#276302); +#276302 = SURFACE_SIDE_STYLE('',(#276303,#276306)); +#276303 = SURFACE_STYLE_FILL_AREA(#276304); +#276304 = FILL_AREA_STYLE('',(#276305)); +#276305 = FILL_AREA_STYLE_COLOUR('',#272831); +#276306 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276307)); +#276307 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276308 = STYLED_ITEM('color',(#276309),#179112); +#276309 = PRESENTATION_STYLE_ASSIGNMENT((#276310)); +#276310 = SURFACE_STYLE_USAGE(.BOTH.,#276311); +#276311 = SURFACE_SIDE_STYLE('',(#276312,#276315)); +#276312 = SURFACE_STYLE_FILL_AREA(#276313); +#276313 = FILL_AREA_STYLE('',(#276314)); +#276314 = FILL_AREA_STYLE_COLOUR('',#272831); +#276315 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276316)); +#276316 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276317 = STYLED_ITEM('color',(#276318),#179156); +#276318 = PRESENTATION_STYLE_ASSIGNMENT((#276319)); +#276319 = SURFACE_STYLE_USAGE(.BOTH.,#276320); +#276320 = SURFACE_SIDE_STYLE('',(#276321,#276324)); +#276321 = SURFACE_STYLE_FILL_AREA(#276322); +#276322 = FILL_AREA_STYLE('',(#276323)); +#276323 = FILL_AREA_STYLE_COLOUR('',#272831); +#276324 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276325)); +#276325 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276326 = STYLED_ITEM('color',(#276327),#179384); +#276327 = PRESENTATION_STYLE_ASSIGNMENT((#276328)); +#276328 = SURFACE_STYLE_USAGE(.BOTH.,#276329); +#276329 = SURFACE_SIDE_STYLE('',(#276330,#276333)); +#276330 = SURFACE_STYLE_FILL_AREA(#276331); +#276331 = FILL_AREA_STYLE('',(#276332)); +#276332 = FILL_AREA_STYLE_COLOUR('',#272831); +#276333 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276334)); +#276334 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276335 = STYLED_ITEM('color',(#276336),#179714); +#276336 = PRESENTATION_STYLE_ASSIGNMENT((#276337)); +#276337 = SURFACE_STYLE_USAGE(.BOTH.,#276338); +#276338 = SURFACE_SIDE_STYLE('',(#276339,#276342)); +#276339 = SURFACE_STYLE_FILL_AREA(#276340); +#276340 = FILL_AREA_STYLE('',(#276341)); +#276341 = FILL_AREA_STYLE_COLOUR('',#272831); +#276342 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276343)); +#276343 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276344 = STYLED_ITEM('color',(#276345),#179881); +#276345 = PRESENTATION_STYLE_ASSIGNMENT((#276346)); +#276346 = SURFACE_STYLE_USAGE(.BOTH.,#276347); +#276347 = SURFACE_SIDE_STYLE('',(#276348,#276351)); +#276348 = SURFACE_STYLE_FILL_AREA(#276349); +#276349 = FILL_AREA_STYLE('',(#276350)); +#276350 = FILL_AREA_STYLE_COLOUR('',#272831); +#276351 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276352)); +#276352 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276353 = STYLED_ITEM('color',(#276354),#180052); +#276354 = PRESENTATION_STYLE_ASSIGNMENT((#276355)); +#276355 = SURFACE_STYLE_USAGE(.BOTH.,#276356); +#276356 = SURFACE_SIDE_STYLE('',(#276357,#276360)); +#276357 = SURFACE_STYLE_FILL_AREA(#276358); +#276358 = FILL_AREA_STYLE('',(#276359)); +#276359 = FILL_AREA_STYLE_COLOUR('',#272831); +#276360 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276361)); +#276361 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276362 = STYLED_ITEM('color',(#276363),#180255); +#276363 = PRESENTATION_STYLE_ASSIGNMENT((#276364)); +#276364 = SURFACE_STYLE_USAGE(.BOTH.,#276365); +#276365 = SURFACE_SIDE_STYLE('',(#276366,#276369)); +#276366 = SURFACE_STYLE_FILL_AREA(#276367); +#276367 = FILL_AREA_STYLE('',(#276368)); +#276368 = FILL_AREA_STYLE_COLOUR('',#272831); +#276369 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276370)); +#276370 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276371 = STYLED_ITEM('color',(#276372),#180398); +#276372 = PRESENTATION_STYLE_ASSIGNMENT((#276373)); +#276373 = SURFACE_STYLE_USAGE(.BOTH.,#276374); +#276374 = SURFACE_SIDE_STYLE('',(#276375,#276378)); +#276375 = SURFACE_STYLE_FILL_AREA(#276376); +#276376 = FILL_AREA_STYLE('',(#276377)); +#276377 = FILL_AREA_STYLE_COLOUR('',#272831); +#276378 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276379)); +#276379 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276380 = STYLED_ITEM('color',(#276381),#180626); +#276381 = PRESENTATION_STYLE_ASSIGNMENT((#276382)); +#276382 = SURFACE_STYLE_USAGE(.BOTH.,#276383); +#276383 = SURFACE_SIDE_STYLE('',(#276384,#276387)); +#276384 = SURFACE_STYLE_FILL_AREA(#276385); +#276385 = FILL_AREA_STYLE('',(#276386)); +#276386 = FILL_AREA_STYLE_COLOUR('',#272831); +#276387 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276388)); +#276388 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276389 = STYLED_ITEM('color',(#276390),#180738); +#276390 = PRESENTATION_STYLE_ASSIGNMENT((#276391)); +#276391 = SURFACE_STYLE_USAGE(.BOTH.,#276392); +#276392 = SURFACE_SIDE_STYLE('',(#276393,#276396)); +#276393 = SURFACE_STYLE_FILL_AREA(#276394); +#276394 = FILL_AREA_STYLE('',(#276395)); +#276395 = FILL_AREA_STYLE_COLOUR('',#272831); +#276396 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276397)); +#276397 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276398 = STYLED_ITEM('color',(#276399),#180850); +#276399 = PRESENTATION_STYLE_ASSIGNMENT((#276400)); +#276400 = SURFACE_STYLE_USAGE(.BOTH.,#276401); +#276401 = SURFACE_SIDE_STYLE('',(#276402,#276405)); +#276402 = SURFACE_STYLE_FILL_AREA(#276403); +#276403 = FILL_AREA_STYLE('',(#276404)); +#276404 = FILL_AREA_STYLE_COLOUR('',#272831); +#276405 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276406)); +#276406 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276407 = STYLED_ITEM('color',(#276408),#180894); +#276408 = PRESENTATION_STYLE_ASSIGNMENT((#276409)); +#276409 = SURFACE_STYLE_USAGE(.BOTH.,#276410); +#276410 = SURFACE_SIDE_STYLE('',(#276411,#276414)); +#276411 = SURFACE_STYLE_FILL_AREA(#276412); +#276412 = FILL_AREA_STYLE('',(#276413)); +#276413 = FILL_AREA_STYLE_COLOUR('',#272831); +#276414 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276415)); +#276415 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276416 = STYLED_ITEM('color',(#276417),#180938); +#276417 = PRESENTATION_STYLE_ASSIGNMENT((#276418)); +#276418 = SURFACE_STYLE_USAGE(.BOTH.,#276419); +#276419 = SURFACE_SIDE_STYLE('',(#276420,#276423)); +#276420 = SURFACE_STYLE_FILL_AREA(#276421); +#276421 = FILL_AREA_STYLE('',(#276422)); +#276422 = FILL_AREA_STYLE_COLOUR('',#272831); +#276423 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276424)); +#276424 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276425 = STYLED_ITEM('color',(#276426),#181224); +#276426 = PRESENTATION_STYLE_ASSIGNMENT((#276427)); +#276427 = SURFACE_STYLE_USAGE(.BOTH.,#276428); +#276428 = SURFACE_SIDE_STYLE('',(#276429,#276432)); +#276429 = SURFACE_STYLE_FILL_AREA(#276430); +#276430 = FILL_AREA_STYLE('',(#276431)); +#276431 = FILL_AREA_STYLE_COLOUR('',#272831); +#276432 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276433)); +#276433 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276434 = STYLED_ITEM('color',(#276435),#181318); +#276435 = PRESENTATION_STYLE_ASSIGNMENT((#276436)); +#276436 = SURFACE_STYLE_USAGE(.BOTH.,#276437); +#276437 = SURFACE_SIDE_STYLE('',(#276438,#276441)); +#276438 = SURFACE_STYLE_FILL_AREA(#276439); +#276439 = FILL_AREA_STYLE('',(#276440)); +#276440 = FILL_AREA_STYLE_COLOUR('',#272831); +#276441 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276442)); +#276442 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276443 = STYLED_ITEM('color',(#276444),#181456); +#276444 = PRESENTATION_STYLE_ASSIGNMENT((#276445)); +#276445 = SURFACE_STYLE_USAGE(.BOTH.,#276446); +#276446 = SURFACE_SIDE_STYLE('',(#276447,#276450)); +#276447 = SURFACE_STYLE_FILL_AREA(#276448); +#276448 = FILL_AREA_STYLE('',(#276449)); +#276449 = FILL_AREA_STYLE_COLOUR('',#272831); +#276450 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276451)); +#276451 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276452 = STYLED_ITEM('color',(#276453),#181650); +#276453 = PRESENTATION_STYLE_ASSIGNMENT((#276454)); +#276454 = SURFACE_STYLE_USAGE(.BOTH.,#276455); +#276455 = SURFACE_SIDE_STYLE('',(#276456,#276459)); +#276456 = SURFACE_STYLE_FILL_AREA(#276457); +#276457 = FILL_AREA_STYLE('',(#276458)); +#276458 = FILL_AREA_STYLE_COLOUR('',#272831); +#276459 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276460)); +#276460 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276461 = STYLED_ITEM('color',(#276462),#181801); +#276462 = PRESENTATION_STYLE_ASSIGNMENT((#276463)); +#276463 = SURFACE_STYLE_USAGE(.BOTH.,#276464); +#276464 = SURFACE_SIDE_STYLE('',(#276465,#276468)); +#276465 = SURFACE_STYLE_FILL_AREA(#276466); +#276466 = FILL_AREA_STYLE('',(#276467)); +#276467 = FILL_AREA_STYLE_COLOUR('',#272831); +#276468 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276469)); +#276469 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276470 = STYLED_ITEM('color',(#276471),#181993); +#276471 = PRESENTATION_STYLE_ASSIGNMENT((#276472)); +#276472 = SURFACE_STYLE_USAGE(.BOTH.,#276473); +#276473 = SURFACE_SIDE_STYLE('',(#276474,#276477)); +#276474 = SURFACE_STYLE_FILL_AREA(#276475); +#276475 = FILL_AREA_STYLE('',(#276476)); +#276476 = FILL_AREA_STYLE_COLOUR('',#272831); +#276477 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276478)); +#276478 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276479 = STYLED_ITEM('color',(#276480),#182119); +#276480 = PRESENTATION_STYLE_ASSIGNMENT((#276481)); +#276481 = SURFACE_STYLE_USAGE(.BOTH.,#276482); +#276482 = SURFACE_SIDE_STYLE('',(#276483,#276486)); +#276483 = SURFACE_STYLE_FILL_AREA(#276484); +#276484 = FILL_AREA_STYLE('',(#276485)); +#276485 = FILL_AREA_STYLE_COLOUR('',#272831); +#276486 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276487)); +#276487 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276488 = STYLED_ITEM('color',(#276489),#182377); +#276489 = PRESENTATION_STYLE_ASSIGNMENT((#276490)); +#276490 = SURFACE_STYLE_USAGE(.BOTH.,#276491); +#276491 = SURFACE_SIDE_STYLE('',(#276492,#276495)); +#276492 = SURFACE_STYLE_FILL_AREA(#276493); +#276493 = FILL_AREA_STYLE('',(#276494)); +#276494 = FILL_AREA_STYLE_COLOUR('',#272831); +#276495 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276496)); +#276496 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276497 = STYLED_ITEM('color',(#276498),#182720); +#276498 = PRESENTATION_STYLE_ASSIGNMENT((#276499)); +#276499 = SURFACE_STYLE_USAGE(.BOTH.,#276500); +#276500 = SURFACE_SIDE_STYLE('',(#276501,#276504)); +#276501 = SURFACE_STYLE_FILL_AREA(#276502); +#276502 = FILL_AREA_STYLE('',(#276503)); +#276503 = FILL_AREA_STYLE_COLOUR('',#272831); +#276504 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276505)); +#276505 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276506 = STYLED_ITEM('color',(#276507),#182912); +#276507 = PRESENTATION_STYLE_ASSIGNMENT((#276508)); +#276508 = SURFACE_STYLE_USAGE(.BOTH.,#276509); +#276509 = SURFACE_SIDE_STYLE('',(#276510,#276513)); +#276510 = SURFACE_STYLE_FILL_AREA(#276511); +#276511 = FILL_AREA_STYLE('',(#276512)); +#276512 = FILL_AREA_STYLE_COLOUR('',#272831); +#276513 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276514)); +#276514 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276515 = STYLED_ITEM('color',(#276516),#183038); +#276516 = PRESENTATION_STYLE_ASSIGNMENT((#276517)); +#276517 = SURFACE_STYLE_USAGE(.BOTH.,#276518); +#276518 = SURFACE_SIDE_STYLE('',(#276519,#276522)); +#276519 = SURFACE_STYLE_FILL_AREA(#276520); +#276520 = FILL_AREA_STYLE('',(#276521)); +#276521 = FILL_AREA_STYLE_COLOUR('',#272831); +#276522 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276523)); +#276523 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276524 = STYLED_ITEM('color',(#276525),#183296); +#276525 = PRESENTATION_STYLE_ASSIGNMENT((#276526)); +#276526 = SURFACE_STYLE_USAGE(.BOTH.,#276527); +#276527 = SURFACE_SIDE_STYLE('',(#276528,#276531)); +#276528 = SURFACE_STYLE_FILL_AREA(#276529); +#276529 = FILL_AREA_STYLE('',(#276530)); +#276530 = FILL_AREA_STYLE_COLOUR('',#272831); +#276531 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276532)); +#276532 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276533 = STYLED_ITEM('color',(#276534),#183364); +#276534 = PRESENTATION_STYLE_ASSIGNMENT((#276535)); +#276535 = SURFACE_STYLE_USAGE(.BOTH.,#276536); +#276536 = SURFACE_SIDE_STYLE('',(#276537,#276540)); +#276537 = SURFACE_STYLE_FILL_AREA(#276538); +#276538 = FILL_AREA_STYLE('',(#276539)); +#276539 = FILL_AREA_STYLE_COLOUR('',#272831); +#276540 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276541)); +#276541 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276542 = STYLED_ITEM('color',(#276543),#183458); +#276543 = PRESENTATION_STYLE_ASSIGNMENT((#276544)); +#276544 = SURFACE_STYLE_USAGE(.BOTH.,#276545); +#276545 = SURFACE_SIDE_STYLE('',(#276546,#276549)); +#276546 = SURFACE_STYLE_FILL_AREA(#276547); +#276547 = FILL_AREA_STYLE('',(#276548)); +#276548 = FILL_AREA_STYLE_COLOUR('',#272831); +#276549 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276550)); +#276550 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276551 = STYLED_ITEM('color',(#276552),#183527); +#276552 = PRESENTATION_STYLE_ASSIGNMENT((#276553)); +#276553 = SURFACE_STYLE_USAGE(.BOTH.,#276554); +#276554 = SURFACE_SIDE_STYLE('',(#276555,#276558)); +#276555 = SURFACE_STYLE_FILL_AREA(#276556); +#276556 = FILL_AREA_STYLE('',(#276557)); +#276557 = FILL_AREA_STYLE_COLOUR('',#272831); +#276558 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276559)); +#276559 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276560 = STYLED_ITEM('color',(#276561),#183596); +#276561 = PRESENTATION_STYLE_ASSIGNMENT((#276562)); +#276562 = SURFACE_STYLE_USAGE(.BOTH.,#276563); +#276563 = SURFACE_SIDE_STYLE('',(#276564,#276567)); +#276564 = SURFACE_STYLE_FILL_AREA(#276565); +#276565 = FILL_AREA_STYLE('',(#276566)); +#276566 = FILL_AREA_STYLE_COLOUR('',#272831); +#276567 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276568)); +#276568 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276569 = STYLED_ITEM('color',(#276570),#183748); +#276570 = PRESENTATION_STYLE_ASSIGNMENT((#276571)); +#276571 = SURFACE_STYLE_USAGE(.BOTH.,#276572); +#276572 = SURFACE_SIDE_STYLE('',(#276573,#276576)); +#276573 = SURFACE_STYLE_FILL_AREA(#276574); +#276574 = FILL_AREA_STYLE('',(#276575)); +#276575 = FILL_AREA_STYLE_COLOUR('',#272831); +#276576 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276577)); +#276577 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276578 = STYLED_ITEM('color',(#276579),#183792); +#276579 = PRESENTATION_STYLE_ASSIGNMENT((#276580)); +#276580 = SURFACE_STYLE_USAGE(.BOTH.,#276581); +#276581 = SURFACE_SIDE_STYLE('',(#276582,#276585)); +#276582 = SURFACE_STYLE_FILL_AREA(#276583); +#276583 = FILL_AREA_STYLE('',(#276584)); +#276584 = FILL_AREA_STYLE_COLOUR('',#272831); +#276585 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276586)); +#276586 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276587 = STYLED_ITEM('color',(#276588),#183879); +#276588 = PRESENTATION_STYLE_ASSIGNMENT((#276589)); +#276589 = SURFACE_STYLE_USAGE(.BOTH.,#276590); +#276590 = SURFACE_SIDE_STYLE('',(#276591,#276594)); +#276591 = SURFACE_STYLE_FILL_AREA(#276592); +#276592 = FILL_AREA_STYLE('',(#276593)); +#276593 = FILL_AREA_STYLE_COLOUR('',#272831); +#276594 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276595)); +#276595 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276596 = STYLED_ITEM('color',(#276597),#184182); +#276597 = PRESENTATION_STYLE_ASSIGNMENT((#276598)); +#276598 = SURFACE_STYLE_USAGE(.BOTH.,#276599); +#276599 = SURFACE_SIDE_STYLE('',(#276600,#276603)); +#276600 = SURFACE_STYLE_FILL_AREA(#276601); +#276601 = FILL_AREA_STYLE('',(#276602)); +#276602 = FILL_AREA_STYLE_COLOUR('',#272831); +#276603 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276604)); +#276604 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276605 = STYLED_ITEM('color',(#276606),#184384); +#276606 = PRESENTATION_STYLE_ASSIGNMENT((#276607)); +#276607 = SURFACE_STYLE_USAGE(.BOTH.,#276608); +#276608 = SURFACE_SIDE_STYLE('',(#276609,#276612)); +#276609 = SURFACE_STYLE_FILL_AREA(#276610); +#276610 = FILL_AREA_STYLE('',(#276611)); +#276611 = FILL_AREA_STYLE_COLOUR('',#272831); +#276612 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276613)); +#276613 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276614 = STYLED_ITEM('color',(#276615),#184604); +#276615 = PRESENTATION_STYLE_ASSIGNMENT((#276616)); +#276616 = SURFACE_STYLE_USAGE(.BOTH.,#276617); +#276617 = SURFACE_SIDE_STYLE('',(#276618,#276621)); +#276618 = SURFACE_STYLE_FILL_AREA(#276619); +#276619 = FILL_AREA_STYLE('',(#276620)); +#276620 = FILL_AREA_STYLE_COLOUR('',#272831); +#276621 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276622)); +#276622 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276623 = STYLED_ITEM('color',(#276624),#184876); +#276624 = PRESENTATION_STYLE_ASSIGNMENT((#276625)); +#276625 = SURFACE_STYLE_USAGE(.BOTH.,#276626); +#276626 = SURFACE_SIDE_STYLE('',(#276627,#276630)); +#276627 = SURFACE_STYLE_FILL_AREA(#276628); +#276628 = FILL_AREA_STYLE('',(#276629)); +#276629 = FILL_AREA_STYLE_COLOUR('',#272831); +#276630 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276631)); +#276631 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276632 = STYLED_ITEM('color',(#276633),#185004); +#276633 = PRESENTATION_STYLE_ASSIGNMENT((#276634)); +#276634 = SURFACE_STYLE_USAGE(.BOTH.,#276635); +#276635 = SURFACE_SIDE_STYLE('',(#276636,#276639)); +#276636 = SURFACE_STYLE_FILL_AREA(#276637); +#276637 = FILL_AREA_STYLE('',(#276638)); +#276638 = FILL_AREA_STYLE_COLOUR('',#272831); +#276639 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276640)); +#276640 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276641 = STYLED_ITEM('color',(#276642),#185225); +#276642 = PRESENTATION_STYLE_ASSIGNMENT((#276643)); +#276643 = SURFACE_STYLE_USAGE(.BOTH.,#276644); +#276644 = SURFACE_SIDE_STYLE('',(#276645,#276648)); +#276645 = SURFACE_STYLE_FILL_AREA(#276646); +#276646 = FILL_AREA_STYLE('',(#276647)); +#276647 = FILL_AREA_STYLE_COLOUR('',#272831); +#276648 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276649)); +#276649 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276650 = STYLED_ITEM('color',(#276651),#185269); +#276651 = PRESENTATION_STYLE_ASSIGNMENT((#276652)); +#276652 = SURFACE_STYLE_USAGE(.BOTH.,#276653); +#276653 = SURFACE_SIDE_STYLE('',(#276654,#276657)); +#276654 = SURFACE_STYLE_FILL_AREA(#276655); +#276655 = FILL_AREA_STYLE('',(#276656)); +#276656 = FILL_AREA_STYLE_COLOUR('',#272831); +#276657 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276658)); +#276658 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276659 = STYLED_ITEM('color',(#276660),#185476); +#276660 = PRESENTATION_STYLE_ASSIGNMENT((#276661)); +#276661 = SURFACE_STYLE_USAGE(.BOTH.,#276662); +#276662 = SURFACE_SIDE_STYLE('',(#276663,#276666)); +#276663 = SURFACE_STYLE_FILL_AREA(#276664); +#276664 = FILL_AREA_STYLE('',(#276665)); +#276665 = FILL_AREA_STYLE_COLOUR('',#272831); +#276666 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276667)); +#276667 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276668 = STYLED_ITEM('color',(#276669),#185757); +#276669 = PRESENTATION_STYLE_ASSIGNMENT((#276670)); +#276670 = SURFACE_STYLE_USAGE(.BOTH.,#276671); +#276671 = SURFACE_SIDE_STYLE('',(#276672,#276675)); +#276672 = SURFACE_STYLE_FILL_AREA(#276673); +#276673 = FILL_AREA_STYLE('',(#276674)); +#276674 = FILL_AREA_STYLE_COLOUR('',#272831); +#276675 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276676)); +#276676 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276677 = STYLED_ITEM('color',(#276678),#185900); +#276678 = PRESENTATION_STYLE_ASSIGNMENT((#276679)); +#276679 = SURFACE_STYLE_USAGE(.BOTH.,#276680); +#276680 = SURFACE_SIDE_STYLE('',(#276681,#276684)); +#276681 = SURFACE_STYLE_FILL_AREA(#276682); +#276682 = FILL_AREA_STYLE('',(#276683)); +#276683 = FILL_AREA_STYLE_COLOUR('',#272831); +#276684 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276685)); +#276685 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276686 = STYLED_ITEM('color',(#276687),#186071); +#276687 = PRESENTATION_STYLE_ASSIGNMENT((#276688)); +#276688 = SURFACE_STYLE_USAGE(.BOTH.,#276689); +#276689 = SURFACE_SIDE_STYLE('',(#276690,#276693)); +#276690 = SURFACE_STYLE_FILL_AREA(#276691); +#276691 = FILL_AREA_STYLE('',(#276692)); +#276692 = FILL_AREA_STYLE_COLOUR('',#272831); +#276693 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276694)); +#276694 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276695 = STYLED_ITEM('color',(#276696),#186274); +#276696 = PRESENTATION_STYLE_ASSIGNMENT((#276697)); +#276697 = SURFACE_STYLE_USAGE(.BOTH.,#276698); +#276698 = SURFACE_SIDE_STYLE('',(#276699,#276702)); +#276699 = SURFACE_STYLE_FILL_AREA(#276700); +#276700 = FILL_AREA_STYLE('',(#276701)); +#276701 = FILL_AREA_STYLE_COLOUR('',#272831); +#276702 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276703)); +#276703 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276704 = STYLED_ITEM('color',(#276705),#186468); +#276705 = PRESENTATION_STYLE_ASSIGNMENT((#276706)); +#276706 = SURFACE_STYLE_USAGE(.BOTH.,#276707); +#276707 = SURFACE_SIDE_STYLE('',(#276708,#276711)); +#276708 = SURFACE_STYLE_FILL_AREA(#276709); +#276709 = FILL_AREA_STYLE('',(#276710)); +#276710 = FILL_AREA_STYLE_COLOUR('',#272831); +#276711 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276712)); +#276712 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276713 = STYLED_ITEM('color',(#276714),#186570); +#276714 = PRESENTATION_STYLE_ASSIGNMENT((#276715)); +#276715 = SURFACE_STYLE_USAGE(.BOTH.,#276716); +#276716 = SURFACE_SIDE_STYLE('',(#276717,#276720)); +#276717 = SURFACE_STYLE_FILL_AREA(#276718); +#276718 = FILL_AREA_STYLE('',(#276719)); +#276719 = FILL_AREA_STYLE_COLOUR('',#272831); +#276720 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276721)); +#276721 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276722 = STYLED_ITEM('color',(#276723),#186614); +#276723 = PRESENTATION_STYLE_ASSIGNMENT((#276724)); +#276724 = SURFACE_STYLE_USAGE(.BOTH.,#276725); +#276725 = SURFACE_SIDE_STYLE('',(#276726,#276729)); +#276726 = SURFACE_STYLE_FILL_AREA(#276727); +#276727 = FILL_AREA_STYLE('',(#276728)); +#276728 = FILL_AREA_STYLE_COLOUR('',#272831); +#276729 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276730)); +#276730 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276731 = STYLED_ITEM('color',(#276732),#186867); +#276732 = PRESENTATION_STYLE_ASSIGNMENT((#276733)); +#276733 = SURFACE_STYLE_USAGE(.BOTH.,#276734); +#276734 = SURFACE_SIDE_STYLE('',(#276735,#276738)); +#276735 = SURFACE_STYLE_FILL_AREA(#276736); +#276736 = FILL_AREA_STYLE('',(#276737)); +#276737 = FILL_AREA_STYLE_COLOUR('',#272831); +#276738 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276739)); +#276739 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276740 = STYLED_ITEM('color',(#276741),#187139); +#276741 = PRESENTATION_STYLE_ASSIGNMENT((#276742)); +#276742 = SURFACE_STYLE_USAGE(.BOTH.,#276743); +#276743 = SURFACE_SIDE_STYLE('',(#276744,#276747)); +#276744 = SURFACE_STYLE_FILL_AREA(#276745); +#276745 = FILL_AREA_STYLE('',(#276746)); +#276746 = FILL_AREA_STYLE_COLOUR('',#272831); +#276747 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276748)); +#276748 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276749 = STYLED_ITEM('color',(#276750),#187259); +#276750 = PRESENTATION_STYLE_ASSIGNMENT((#276751)); +#276751 = SURFACE_STYLE_USAGE(.BOTH.,#276752); +#276752 = SURFACE_SIDE_STYLE('',(#276753,#276756)); +#276753 = SURFACE_STYLE_FILL_AREA(#276754); +#276754 = FILL_AREA_STYLE('',(#276755)); +#276755 = FILL_AREA_STYLE_COLOUR('',#272831); +#276756 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276757)); +#276757 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276758 = STYLED_ITEM('color',(#276759),#187426); +#276759 = PRESENTATION_STYLE_ASSIGNMENT((#276760)); +#276760 = SURFACE_STYLE_USAGE(.BOTH.,#276761); +#276761 = SURFACE_SIDE_STYLE('',(#276762,#276765)); +#276762 = SURFACE_STYLE_FILL_AREA(#276763); +#276763 = FILL_AREA_STYLE('',(#276764)); +#276764 = FILL_AREA_STYLE_COLOUR('',#272831); +#276765 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276766)); +#276766 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276767 = STYLED_ITEM('color',(#276768),#187520); +#276768 = PRESENTATION_STYLE_ASSIGNMENT((#276769)); +#276769 = SURFACE_STYLE_USAGE(.BOTH.,#276770); +#276770 = SURFACE_SIDE_STYLE('',(#276771,#276774)); +#276771 = SURFACE_STYLE_FILL_AREA(#276772); +#276772 = FILL_AREA_STYLE('',(#276773)); +#276773 = FILL_AREA_STYLE_COLOUR('',#272831); +#276774 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276775)); +#276775 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276776 = STYLED_ITEM('color',(#276777),#187658); +#276777 = PRESENTATION_STYLE_ASSIGNMENT((#276778)); +#276778 = SURFACE_STYLE_USAGE(.BOTH.,#276779); +#276779 = SURFACE_SIDE_STYLE('',(#276780,#276783)); +#276780 = SURFACE_STYLE_FILL_AREA(#276781); +#276781 = FILL_AREA_STYLE('',(#276782)); +#276782 = FILL_AREA_STYLE_COLOUR('',#272831); +#276783 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276784)); +#276784 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276785 = STYLED_ITEM('color',(#276786),#187776); +#276786 = PRESENTATION_STYLE_ASSIGNMENT((#276787)); +#276787 = SURFACE_STYLE_USAGE(.BOTH.,#276788); +#276788 = SURFACE_SIDE_STYLE('',(#276789,#276792)); +#276789 = SURFACE_STYLE_FILL_AREA(#276790); +#276790 = FILL_AREA_STYLE('',(#276791)); +#276791 = FILL_AREA_STYLE_COLOUR('',#272831); +#276792 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276793)); +#276793 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276794 = STYLED_ITEM('color',(#276795),#187820); +#276795 = PRESENTATION_STYLE_ASSIGNMENT((#276796)); +#276796 = SURFACE_STYLE_USAGE(.BOTH.,#276797); +#276797 = SURFACE_SIDE_STYLE('',(#276798,#276801)); +#276798 = SURFACE_STYLE_FILL_AREA(#276799); +#276799 = FILL_AREA_STYLE('',(#276800)); +#276800 = FILL_AREA_STYLE_COLOUR('',#272831); +#276801 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276802)); +#276802 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276803 = STYLED_ITEM('color',(#276804),#188143); +#276804 = PRESENTATION_STYLE_ASSIGNMENT((#276805)); +#276805 = SURFACE_STYLE_USAGE(.BOTH.,#276806); +#276806 = SURFACE_SIDE_STYLE('',(#276807,#276810)); +#276807 = SURFACE_STYLE_FILL_AREA(#276808); +#276808 = FILL_AREA_STYLE('',(#276809)); +#276809 = FILL_AREA_STYLE_COLOUR('',#272831); +#276810 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276811)); +#276811 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276812 = STYLED_ITEM('color',(#276813),#188173); +#276813 = PRESENTATION_STYLE_ASSIGNMENT((#276814)); +#276814 = SURFACE_STYLE_USAGE(.BOTH.,#276815); +#276815 = SURFACE_SIDE_STYLE('',(#276816,#276819)); +#276816 = SURFACE_STYLE_FILL_AREA(#276817); +#276817 = FILL_AREA_STYLE('',(#276818)); +#276818 = FILL_AREA_STYLE_COLOUR('',#272831); +#276819 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276820)); +#276820 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276821 = STYLED_ITEM('color',(#276822),#188266); +#276822 = PRESENTATION_STYLE_ASSIGNMENT((#276823)); +#276823 = SURFACE_STYLE_USAGE(.BOTH.,#276824); +#276824 = SURFACE_SIDE_STYLE('',(#276825,#276828)); +#276825 = SURFACE_STYLE_FILL_AREA(#276826); +#276826 = FILL_AREA_STYLE('',(#276827)); +#276827 = FILL_AREA_STYLE_COLOUR('',#272831); +#276828 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276829)); +#276829 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276830 = STYLED_ITEM('color',(#276831),#188310); +#276831 = PRESENTATION_STYLE_ASSIGNMENT((#276832)); +#276832 = SURFACE_STYLE_USAGE(.BOTH.,#276833); +#276833 = SURFACE_SIDE_STYLE('',(#276834,#276837)); +#276834 = SURFACE_STYLE_FILL_AREA(#276835); +#276835 = FILL_AREA_STYLE('',(#276836)); +#276836 = FILL_AREA_STYLE_COLOUR('',#272831); +#276837 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276838)); +#276838 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276839 = STYLED_ITEM('color',(#276840),#188563); +#276840 = PRESENTATION_STYLE_ASSIGNMENT((#276841)); +#276841 = SURFACE_STYLE_USAGE(.BOTH.,#276842); +#276842 = SURFACE_SIDE_STYLE('',(#276843,#276846)); +#276843 = SURFACE_STYLE_FILL_AREA(#276844); +#276844 = FILL_AREA_STYLE('',(#276845)); +#276845 = FILL_AREA_STYLE_COLOUR('',#272831); +#276846 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276847)); +#276847 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276848 = STYLED_ITEM('color',(#276849),#188835); +#276849 = PRESENTATION_STYLE_ASSIGNMENT((#276850)); +#276850 = SURFACE_STYLE_USAGE(.BOTH.,#276851); +#276851 = SURFACE_SIDE_STYLE('',(#276852,#276855)); +#276852 = SURFACE_STYLE_FILL_AREA(#276853); +#276853 = FILL_AREA_STYLE('',(#276854)); +#276854 = FILL_AREA_STYLE_COLOUR('',#272831); +#276855 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276856)); +#276856 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276857 = STYLED_ITEM('color',(#276858),#188955); +#276858 = PRESENTATION_STYLE_ASSIGNMENT((#276859)); +#276859 = SURFACE_STYLE_USAGE(.BOTH.,#276860); +#276860 = SURFACE_SIDE_STYLE('',(#276861,#276864)); +#276861 = SURFACE_STYLE_FILL_AREA(#276862); +#276862 = FILL_AREA_STYLE('',(#276863)); +#276863 = FILL_AREA_STYLE_COLOUR('',#272831); +#276864 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276865)); +#276865 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276866 = STYLED_ITEM('color',(#276867),#189073); +#276867 = PRESENTATION_STYLE_ASSIGNMENT((#276868)); +#276868 = SURFACE_STYLE_USAGE(.BOTH.,#276869); +#276869 = SURFACE_SIDE_STYLE('',(#276870,#276873)); +#276870 = SURFACE_STYLE_FILL_AREA(#276871); +#276871 = FILL_AREA_STYLE('',(#276872)); +#276872 = FILL_AREA_STYLE_COLOUR('',#272831); +#276873 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276874)); +#276874 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276875 = STYLED_ITEM('color',(#276876),#189200); +#276876 = PRESENTATION_STYLE_ASSIGNMENT((#276877)); +#276877 = SURFACE_STYLE_USAGE(.BOTH.,#276878); +#276878 = SURFACE_SIDE_STYLE('',(#276879,#276882)); +#276879 = SURFACE_STYLE_FILL_AREA(#276880); +#276880 = FILL_AREA_STYLE('',(#276881)); +#276881 = FILL_AREA_STYLE_COLOUR('',#272831); +#276882 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276883)); +#276883 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276884 = STYLED_ITEM('color',(#276885),#189269); +#276885 = PRESENTATION_STYLE_ASSIGNMENT((#276886)); +#276886 = SURFACE_STYLE_USAGE(.BOTH.,#276887); +#276887 = SURFACE_SIDE_STYLE('',(#276888,#276891)); +#276888 = SURFACE_STYLE_FILL_AREA(#276889); +#276889 = FILL_AREA_STYLE('',(#276890)); +#276890 = FILL_AREA_STYLE_COLOUR('',#272831); +#276891 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276892)); +#276892 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276893 = STYLED_ITEM('color',(#276894),#189463); +#276894 = PRESENTATION_STYLE_ASSIGNMENT((#276895)); +#276895 = SURFACE_STYLE_USAGE(.BOTH.,#276896); +#276896 = SURFACE_SIDE_STYLE('',(#276897,#276900)); +#276897 = SURFACE_STYLE_FILL_AREA(#276898); +#276898 = FILL_AREA_STYLE('',(#276899)); +#276899 = FILL_AREA_STYLE_COLOUR('',#272831); +#276900 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276901)); +#276901 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276902 = STYLED_ITEM('color',(#276903),#189565); +#276903 = PRESENTATION_STYLE_ASSIGNMENT((#276904)); +#276904 = SURFACE_STYLE_USAGE(.BOTH.,#276905); +#276905 = SURFACE_SIDE_STYLE('',(#276906,#276909)); +#276906 = SURFACE_STYLE_FILL_AREA(#276907); +#276907 = FILL_AREA_STYLE('',(#276908)); +#276908 = FILL_AREA_STYLE_COLOUR('',#272831); +#276909 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276910)); +#276910 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276911 = STYLED_ITEM('color',(#276912),#189707); +#276912 = PRESENTATION_STYLE_ASSIGNMENT((#276913)); +#276913 = SURFACE_STYLE_USAGE(.BOTH.,#276914); +#276914 = SURFACE_SIDE_STYLE('',(#276915,#276918)); +#276915 = SURFACE_STYLE_FILL_AREA(#276916); +#276916 = FILL_AREA_STYLE('',(#276917)); +#276917 = FILL_AREA_STYLE_COLOUR('',#272831); +#276918 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276919)); +#276919 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276920 = STYLED_ITEM('color',(#276921),#189878); +#276921 = PRESENTATION_STYLE_ASSIGNMENT((#276922)); +#276922 = SURFACE_STYLE_USAGE(.BOTH.,#276923); +#276923 = SURFACE_SIDE_STYLE('',(#276924,#276927)); +#276924 = SURFACE_STYLE_FILL_AREA(#276925); +#276925 = FILL_AREA_STYLE('',(#276926)); +#276926 = FILL_AREA_STYLE_COLOUR('',#272831); +#276927 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276928)); +#276928 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276929 = STYLED_ITEM('color',(#276930),#190150); +#276930 = PRESENTATION_STYLE_ASSIGNMENT((#276931)); +#276931 = SURFACE_STYLE_USAGE(.BOTH.,#276932); +#276932 = SURFACE_SIDE_STYLE('',(#276933,#276936)); +#276933 = SURFACE_STYLE_FILL_AREA(#276934); +#276934 = FILL_AREA_STYLE('',(#276935)); +#276935 = FILL_AREA_STYLE_COLOUR('',#272831); +#276936 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276937)); +#276937 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276938 = STYLED_ITEM('color',(#276939),#190399); +#276939 = PRESENTATION_STYLE_ASSIGNMENT((#276940)); +#276940 = SURFACE_STYLE_USAGE(.BOTH.,#276941); +#276941 = SURFACE_SIDE_STYLE('',(#276942,#276945)); +#276942 = SURFACE_STYLE_FILL_AREA(#276943); +#276943 = FILL_AREA_STYLE('',(#276944)); +#276944 = FILL_AREA_STYLE_COLOUR('',#272831); +#276945 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276946)); +#276946 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276947 = STYLED_ITEM('color',(#276948),#190566); +#276948 = PRESENTATION_STYLE_ASSIGNMENT((#276949)); +#276949 = SURFACE_STYLE_USAGE(.BOTH.,#276950); +#276950 = SURFACE_SIDE_STYLE('',(#276951,#276954)); +#276951 = SURFACE_STYLE_FILL_AREA(#276952); +#276952 = FILL_AREA_STYLE('',(#276953)); +#276953 = FILL_AREA_STYLE_COLOUR('',#272831); +#276954 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276955)); +#276955 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276956 = STYLED_ITEM('color',(#276957),#190643); +#276957 = PRESENTATION_STYLE_ASSIGNMENT((#276958)); +#276958 = SURFACE_STYLE_USAGE(.BOTH.,#276959); +#276959 = SURFACE_SIDE_STYLE('',(#276960,#276963)); +#276960 = SURFACE_STYLE_FILL_AREA(#276961); +#276961 = FILL_AREA_STYLE('',(#276962)); +#276962 = FILL_AREA_STYLE_COLOUR('',#272831); +#276963 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276964)); +#276964 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276965 = STYLED_ITEM('color',(#276966),#190781); +#276966 = PRESENTATION_STYLE_ASSIGNMENT((#276967)); +#276967 = SURFACE_STYLE_USAGE(.BOTH.,#276968); +#276968 = SURFACE_SIDE_STYLE('',(#276969,#276972)); +#276969 = SURFACE_STYLE_FILL_AREA(#276970); +#276970 = FILL_AREA_STYLE('',(#276971)); +#276971 = FILL_AREA_STYLE_COLOUR('',#272831); +#276972 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276973)); +#276973 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276974 = STYLED_ITEM('color',(#276975),#191030); +#276975 = PRESENTATION_STYLE_ASSIGNMENT((#276976)); +#276976 = SURFACE_STYLE_USAGE(.BOTH.,#276977); +#276977 = SURFACE_SIDE_STYLE('',(#276978,#276981)); +#276978 = SURFACE_STYLE_FILL_AREA(#276979); +#276979 = FILL_AREA_STYLE('',(#276980)); +#276980 = FILL_AREA_STYLE_COLOUR('',#272831); +#276981 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276982)); +#276982 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276983 = STYLED_ITEM('color',(#276984),#191263); +#276984 = PRESENTATION_STYLE_ASSIGNMENT((#276985)); +#276985 = SURFACE_STYLE_USAGE(.BOTH.,#276986); +#276986 = SURFACE_SIDE_STYLE('',(#276987,#276990)); +#276987 = SURFACE_STYLE_FILL_AREA(#276988); +#276988 = FILL_AREA_STYLE('',(#276989)); +#276989 = FILL_AREA_STYLE_COLOUR('',#272831); +#276990 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#276991)); +#276991 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#276992 = STYLED_ITEM('color',(#276993),#191503); +#276993 = PRESENTATION_STYLE_ASSIGNMENT((#276994)); +#276994 = SURFACE_STYLE_USAGE(.BOTH.,#276995); +#276995 = SURFACE_SIDE_STYLE('',(#276996,#276999)); +#276996 = SURFACE_STYLE_FILL_AREA(#276997); +#276997 = FILL_AREA_STYLE('',(#276998)); +#276998 = FILL_AREA_STYLE_COLOUR('',#272831); +#276999 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277000)); +#277000 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277001 = STYLED_ITEM('color',(#277002),#191547); +#277002 = PRESENTATION_STYLE_ASSIGNMENT((#277003)); +#277003 = SURFACE_STYLE_USAGE(.BOTH.,#277004); +#277004 = SURFACE_SIDE_STYLE('',(#277005,#277008)); +#277005 = SURFACE_STYLE_FILL_AREA(#277006); +#277006 = FILL_AREA_STYLE('',(#277007)); +#277007 = FILL_AREA_STYLE_COLOUR('',#272831); +#277008 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277009)); +#277009 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277010 = STYLED_ITEM('color',(#277011),#191599); +#277011 = PRESENTATION_STYLE_ASSIGNMENT((#277012)); +#277012 = SURFACE_STYLE_USAGE(.BOTH.,#277013); +#277013 = SURFACE_SIDE_STYLE('',(#277014,#277017)); +#277014 = SURFACE_STYLE_FILL_AREA(#277015); +#277015 = FILL_AREA_STYLE('',(#277016)); +#277016 = FILL_AREA_STYLE_COLOUR('',#272831); +#277017 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277018)); +#277018 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277019 = STYLED_ITEM('color',(#277020),#191821); +#277020 = PRESENTATION_STYLE_ASSIGNMENT((#277021)); +#277021 = SURFACE_STYLE_USAGE(.BOTH.,#277022); +#277022 = SURFACE_SIDE_STYLE('',(#277023,#277026)); +#277023 = SURFACE_STYLE_FILL_AREA(#277024); +#277024 = FILL_AREA_STYLE('',(#277025)); +#277025 = FILL_AREA_STYLE_COLOUR('',#272831); +#277026 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277027)); +#277027 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277028 = STYLED_ITEM('color',(#277029),#191947); +#277029 = PRESENTATION_STYLE_ASSIGNMENT((#277030)); +#277030 = SURFACE_STYLE_USAGE(.BOTH.,#277031); +#277031 = SURFACE_SIDE_STYLE('',(#277032,#277035)); +#277032 = SURFACE_STYLE_FILL_AREA(#277033); +#277033 = FILL_AREA_STYLE('',(#277034)); +#277034 = FILL_AREA_STYLE_COLOUR('',#272831); +#277035 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277036)); +#277036 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277037 = STYLED_ITEM('color',(#277038),#192205); +#277038 = PRESENTATION_STYLE_ASSIGNMENT((#277039)); +#277039 = SURFACE_STYLE_USAGE(.BOTH.,#277040); +#277040 = SURFACE_SIDE_STYLE('',(#277041,#277044)); +#277041 = SURFACE_STYLE_FILL_AREA(#277042); +#277042 = FILL_AREA_STYLE('',(#277043)); +#277043 = FILL_AREA_STYLE_COLOUR('',#272831); +#277044 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277045)); +#277045 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277046 = STYLED_ITEM('color',(#277047),#192458); +#277047 = PRESENTATION_STYLE_ASSIGNMENT((#277048)); +#277048 = SURFACE_STYLE_USAGE(.BOTH.,#277049); +#277049 = SURFACE_SIDE_STYLE('',(#277050,#277053)); +#277050 = SURFACE_STYLE_FILL_AREA(#277051); +#277051 = FILL_AREA_STYLE('',(#277052)); +#277052 = FILL_AREA_STYLE_COLOUR('',#272831); +#277053 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277054)); +#277054 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277055 = STYLED_ITEM('color',(#277056),#192527); +#277056 = PRESENTATION_STYLE_ASSIGNMENT((#277057)); +#277057 = SURFACE_STYLE_USAGE(.BOTH.,#277058); +#277058 = SURFACE_SIDE_STYLE('',(#277059,#277062)); +#277059 = SURFACE_STYLE_FILL_AREA(#277060); +#277060 = FILL_AREA_STYLE('',(#277061)); +#277061 = FILL_AREA_STYLE_COLOUR('',#272831); +#277062 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277063)); +#277063 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277064 = STYLED_ITEM('color',(#277065),#192799); +#277065 = PRESENTATION_STYLE_ASSIGNMENT((#277066)); +#277066 = SURFACE_STYLE_USAGE(.BOTH.,#277067); +#277067 = SURFACE_SIDE_STYLE('',(#277068,#277071)); +#277068 = SURFACE_STYLE_FILL_AREA(#277069); +#277069 = FILL_AREA_STYLE('',(#277070)); +#277070 = FILL_AREA_STYLE_COLOUR('',#272831); +#277071 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277072)); +#277072 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277073 = STYLED_ITEM('color',(#277074),#192919); +#277074 = PRESENTATION_STYLE_ASSIGNMENT((#277075)); +#277075 = SURFACE_STYLE_USAGE(.BOTH.,#277076); +#277076 = SURFACE_SIDE_STYLE('',(#277077,#277080)); +#277077 = SURFACE_STYLE_FILL_AREA(#277078); +#277078 = FILL_AREA_STYLE('',(#277079)); +#277079 = FILL_AREA_STYLE_COLOUR('',#272831); +#277080 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277081)); +#277081 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277082 = STYLED_ITEM('color',(#277083),#192971); +#277083 = PRESENTATION_STYLE_ASSIGNMENT((#277084)); +#277084 = SURFACE_STYLE_USAGE(.BOTH.,#277085); +#277085 = SURFACE_SIDE_STYLE('',(#277086,#277089)); +#277086 = SURFACE_STYLE_FILL_AREA(#277087); +#277087 = FILL_AREA_STYLE('',(#277088)); +#277088 = FILL_AREA_STYLE_COLOUR('',#272831); +#277089 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277090)); +#277090 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277091 = STYLED_ITEM('color',(#277092),#193015); +#277092 = PRESENTATION_STYLE_ASSIGNMENT((#277093)); +#277093 = SURFACE_STYLE_USAGE(.BOTH.,#277094); +#277094 = SURFACE_SIDE_STYLE('',(#277095,#277098)); +#277095 = SURFACE_STYLE_FILL_AREA(#277096); +#277096 = FILL_AREA_STYLE('',(#277097)); +#277097 = FILL_AREA_STYLE_COLOUR('',#272831); +#277098 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277099)); +#277099 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277100 = STYLED_ITEM('color',(#277101),#193109); +#277101 = PRESENTATION_STYLE_ASSIGNMENT((#277102)); +#277102 = SURFACE_STYLE_USAGE(.BOTH.,#277103); +#277103 = SURFACE_SIDE_STYLE('',(#277104,#277107)); +#277104 = SURFACE_STYLE_FILL_AREA(#277105); +#277105 = FILL_AREA_STYLE('',(#277106)); +#277106 = FILL_AREA_STYLE_COLOUR('',#272831); +#277107 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277108)); +#277108 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277109 = STYLED_ITEM('color',(#277110),#193177); +#277110 = PRESENTATION_STYLE_ASSIGNMENT((#277111)); +#277111 = SURFACE_STYLE_USAGE(.BOTH.,#277112); +#277112 = SURFACE_SIDE_STYLE('',(#277113,#277116)); +#277113 = SURFACE_STYLE_FILL_AREA(#277114); +#277114 = FILL_AREA_STYLE('',(#277115)); +#277115 = FILL_AREA_STYLE_COLOUR('',#272831); +#277116 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277117)); +#277117 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277118 = STYLED_ITEM('color',(#277119),#193221); +#277119 = PRESENTATION_STYLE_ASSIGNMENT((#277120)); +#277120 = SURFACE_STYLE_USAGE(.BOTH.,#277121); +#277121 = SURFACE_SIDE_STYLE('',(#277122,#277125)); +#277122 = SURFACE_STYLE_FILL_AREA(#277123); +#277123 = FILL_AREA_STYLE('',(#277124)); +#277124 = FILL_AREA_STYLE_COLOUR('',#272831); +#277125 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277126)); +#277126 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277127 = STYLED_ITEM('color',(#277128),#193551); +#277128 = PRESENTATION_STYLE_ASSIGNMENT((#277129)); +#277129 = SURFACE_STYLE_USAGE(.BOTH.,#277130); +#277130 = SURFACE_SIDE_STYLE('',(#277131,#277134)); +#277131 = SURFACE_STYLE_FILL_AREA(#277132); +#277132 = FILL_AREA_STYLE('',(#277133)); +#277133 = FILL_AREA_STYLE_COLOUR('',#272831); +#277134 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277135)); +#277135 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277136 = STYLED_ITEM('color',(#277137),#193668); +#277137 = PRESENTATION_STYLE_ASSIGNMENT((#277138)); +#277138 = SURFACE_STYLE_USAGE(.BOTH.,#277139); +#277139 = SURFACE_SIDE_STYLE('',(#277140,#277143)); +#277140 = SURFACE_STYLE_FILL_AREA(#277141); +#277141 = FILL_AREA_STYLE('',(#277142)); +#277142 = FILL_AREA_STYLE_COLOUR('',#272831); +#277143 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277144)); +#277144 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277145 = STYLED_ITEM('color',(#277146),#193735); +#277146 = PRESENTATION_STYLE_ASSIGNMENT((#277147)); +#277147 = SURFACE_STYLE_USAGE(.BOTH.,#277148); +#277148 = SURFACE_SIDE_STYLE('',(#277149,#277152)); +#277149 = SURFACE_STYLE_FILL_AREA(#277150); +#277150 = FILL_AREA_STYLE('',(#277151)); +#277151 = FILL_AREA_STYLE_COLOUR('',#272831); +#277152 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277153)); +#277153 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277154 = STYLED_ITEM('color',(#277155),#193804); +#277155 = PRESENTATION_STYLE_ASSIGNMENT((#277156)); +#277156 = SURFACE_STYLE_USAGE(.BOTH.,#277157); +#277157 = SURFACE_SIDE_STYLE('',(#277158,#277161)); +#277158 = SURFACE_STYLE_FILL_AREA(#277159); +#277159 = FILL_AREA_STYLE('',(#277160)); +#277160 = FILL_AREA_STYLE_COLOUR('',#272831); +#277161 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277162)); +#277162 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277163 = STYLED_ITEM('color',(#277164),#194005); +#277164 = PRESENTATION_STYLE_ASSIGNMENT((#277165)); +#277165 = SURFACE_STYLE_USAGE(.BOTH.,#277166); +#277166 = SURFACE_SIDE_STYLE('',(#277167,#277170)); +#277167 = SURFACE_STYLE_FILL_AREA(#277168); +#277168 = FILL_AREA_STYLE('',(#277169)); +#277169 = FILL_AREA_STYLE_COLOUR('',#272831); +#277170 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277171)); +#277171 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277172 = STYLED_ITEM('color',(#277173),#194090); +#277173 = PRESENTATION_STYLE_ASSIGNMENT((#277174)); +#277174 = SURFACE_STYLE_USAGE(.BOTH.,#277175); +#277175 = SURFACE_SIDE_STYLE('',(#277176,#277179)); +#277176 = SURFACE_STYLE_FILL_AREA(#277177); +#277177 = FILL_AREA_STYLE('',(#277178)); +#277178 = FILL_AREA_STYLE_COLOUR('',#272831); +#277179 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277180)); +#277180 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277181 = STYLED_ITEM('color',(#277182),#194134); +#277182 = PRESENTATION_STYLE_ASSIGNMENT((#277183)); +#277183 = SURFACE_STYLE_USAGE(.BOTH.,#277184); +#277184 = SURFACE_SIDE_STYLE('',(#277185,#277188)); +#277185 = SURFACE_STYLE_FILL_AREA(#277186); +#277186 = FILL_AREA_STYLE('',(#277187)); +#277187 = FILL_AREA_STYLE_COLOUR('',#272831); +#277188 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277189)); +#277189 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277190 = STYLED_ITEM('color',(#277191),#194178); +#277191 = PRESENTATION_STYLE_ASSIGNMENT((#277192)); +#277192 = SURFACE_STYLE_USAGE(.BOTH.,#277193); +#277193 = SURFACE_SIDE_STYLE('',(#277194,#277197)); +#277194 = SURFACE_STYLE_FILL_AREA(#277195); +#277195 = FILL_AREA_STYLE('',(#277196)); +#277196 = FILL_AREA_STYLE_COLOUR('',#272831); +#277197 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277198)); +#277198 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277199 = STYLED_ITEM('color',(#277200),#194281); +#277200 = PRESENTATION_STYLE_ASSIGNMENT((#277201)); +#277201 = SURFACE_STYLE_USAGE(.BOTH.,#277202); +#277202 = SURFACE_SIDE_STYLE('',(#277203,#277206)); +#277203 = SURFACE_STYLE_FILL_AREA(#277204); +#277204 = FILL_AREA_STYLE('',(#277205)); +#277205 = FILL_AREA_STYLE_COLOUR('',#272831); +#277206 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277207)); +#277207 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277208 = STYLED_ITEM('color',(#277209),#194496); +#277209 = PRESENTATION_STYLE_ASSIGNMENT((#277210)); +#277210 = SURFACE_STYLE_USAGE(.BOTH.,#277211); +#277211 = SURFACE_SIDE_STYLE('',(#277212,#277215)); +#277212 = SURFACE_STYLE_FILL_AREA(#277213); +#277213 = FILL_AREA_STYLE('',(#277214)); +#277214 = FILL_AREA_STYLE_COLOUR('',#272831); +#277215 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277216)); +#277216 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277217 = STYLED_ITEM('color',(#277218),#194667); +#277218 = PRESENTATION_STYLE_ASSIGNMENT((#277219)); +#277219 = SURFACE_STYLE_USAGE(.BOTH.,#277220); +#277220 = SURFACE_SIDE_STYLE('',(#277221,#277224)); +#277221 = SURFACE_STYLE_FILL_AREA(#277222); +#277222 = FILL_AREA_STYLE('',(#277223)); +#277223 = FILL_AREA_STYLE_COLOUR('',#272831); +#277224 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277225)); +#277225 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277226 = STYLED_ITEM('color',(#277227),#194767); +#277227 = PRESENTATION_STYLE_ASSIGNMENT((#277228)); +#277228 = SURFACE_STYLE_USAGE(.BOTH.,#277229); +#277229 = SURFACE_SIDE_STYLE('',(#277230,#277233)); +#277230 = SURFACE_STYLE_FILL_AREA(#277231); +#277231 = FILL_AREA_STYLE('',(#277232)); +#277232 = FILL_AREA_STYLE_COLOUR('',#272831); +#277233 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277234)); +#277234 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277235 = STYLED_ITEM('color',(#277236),#194992); +#277236 = PRESENTATION_STYLE_ASSIGNMENT((#277237)); +#277237 = SURFACE_STYLE_USAGE(.BOTH.,#277238); +#277238 = SURFACE_SIDE_STYLE('',(#277239,#277242)); +#277239 = SURFACE_STYLE_FILL_AREA(#277240); +#277240 = FILL_AREA_STYLE('',(#277241)); +#277241 = FILL_AREA_STYLE_COLOUR('',#272831); +#277242 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277243)); +#277243 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277244 = STYLED_ITEM('color',(#277245),#195223); +#277245 = PRESENTATION_STYLE_ASSIGNMENT((#277246)); +#277246 = SURFACE_STYLE_USAGE(.BOTH.,#277247); +#277247 = SURFACE_SIDE_STYLE('',(#277248,#277251)); +#277248 = SURFACE_STYLE_FILL_AREA(#277249); +#277249 = FILL_AREA_STYLE('',(#277250)); +#277250 = FILL_AREA_STYLE_COLOUR('',#272831); +#277251 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277252)); +#277252 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277253 = STYLED_ITEM('color',(#277254),#195401); +#277254 = PRESENTATION_STYLE_ASSIGNMENT((#277255)); +#277255 = SURFACE_STYLE_USAGE(.BOTH.,#277256); +#277256 = SURFACE_SIDE_STYLE('',(#277257,#277260)); +#277257 = SURFACE_STYLE_FILL_AREA(#277258); +#277258 = FILL_AREA_STYLE('',(#277259)); +#277259 = FILL_AREA_STYLE_COLOUR('',#272831); +#277260 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277261)); +#277261 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277262 = STYLED_ITEM('color',(#277263),#195511); +#277263 = PRESENTATION_STYLE_ASSIGNMENT((#277264)); +#277264 = SURFACE_STYLE_USAGE(.BOTH.,#277265); +#277265 = SURFACE_SIDE_STYLE('',(#277266,#277269)); +#277266 = SURFACE_STYLE_FILL_AREA(#277267); +#277267 = FILL_AREA_STYLE('',(#277268)); +#277268 = FILL_AREA_STYLE_COLOUR('',#272831); +#277269 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277270)); +#277270 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277271 = STYLED_ITEM('color',(#277272),#195621); +#277272 = PRESENTATION_STYLE_ASSIGNMENT((#277273)); +#277273 = SURFACE_STYLE_USAGE(.BOTH.,#277274); +#277274 = SURFACE_SIDE_STYLE('',(#277275,#277278)); +#277275 = SURFACE_STYLE_FILL_AREA(#277276); +#277276 = FILL_AREA_STYLE('',(#277277)); +#277277 = FILL_AREA_STYLE_COLOUR('',#272831); +#277278 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277279)); +#277279 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277280 = STYLED_ITEM('color',(#277281),#195748); +#277281 = PRESENTATION_STYLE_ASSIGNMENT((#277282)); +#277282 = SURFACE_STYLE_USAGE(.BOTH.,#277283); +#277283 = SURFACE_SIDE_STYLE('',(#277284,#277287)); +#277284 = SURFACE_STYLE_FILL_AREA(#277285); +#277285 = FILL_AREA_STYLE('',(#277286)); +#277286 = FILL_AREA_STYLE_COLOUR('',#272831); +#277287 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277288)); +#277288 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277289 = STYLED_ITEM('color',(#277290),#195875); +#277290 = PRESENTATION_STYLE_ASSIGNMENT((#277291)); +#277291 = SURFACE_STYLE_USAGE(.BOTH.,#277292); +#277292 = SURFACE_SIDE_STYLE('',(#277293,#277296)); +#277293 = SURFACE_STYLE_FILL_AREA(#277294); +#277294 = FILL_AREA_STYLE('',(#277295)); +#277295 = FILL_AREA_STYLE_COLOUR('',#272831); +#277296 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277297)); +#277297 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277298 = STYLED_ITEM('color',(#277299),#196069); +#277299 = PRESENTATION_STYLE_ASSIGNMENT((#277300)); +#277300 = SURFACE_STYLE_USAGE(.BOTH.,#277301); +#277301 = SURFACE_SIDE_STYLE('',(#277302,#277305)); +#277302 = SURFACE_STYLE_FILL_AREA(#277303); +#277303 = FILL_AREA_STYLE('',(#277304)); +#277304 = FILL_AREA_STYLE_COLOUR('',#272831); +#277305 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277306)); +#277306 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277307 = STYLED_ITEM('color',(#277308),#196341); +#277308 = PRESENTATION_STYLE_ASSIGNMENT((#277309)); +#277309 = SURFACE_STYLE_USAGE(.BOTH.,#277310); +#277310 = SURFACE_SIDE_STYLE('',(#277311,#277314)); +#277311 = SURFACE_STYLE_FILL_AREA(#277312); +#277312 = FILL_AREA_STYLE('',(#277313)); +#277313 = FILL_AREA_STYLE_COLOUR('',#272831); +#277314 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277315)); +#277315 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277316 = STYLED_ITEM('color',(#277317),#196418); +#277317 = PRESENTATION_STYLE_ASSIGNMENT((#277318)); +#277318 = SURFACE_STYLE_USAGE(.BOTH.,#277319); +#277319 = SURFACE_SIDE_STYLE('',(#277320,#277323)); +#277320 = SURFACE_STYLE_FILL_AREA(#277321); +#277321 = FILL_AREA_STYLE('',(#277322)); +#277322 = FILL_AREA_STYLE_COLOUR('',#272831); +#277323 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277324)); +#277324 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277325 = STYLED_ITEM('color',(#277326),#196495); +#277326 = PRESENTATION_STYLE_ASSIGNMENT((#277327)); +#277327 = SURFACE_STYLE_USAGE(.BOTH.,#277328); +#277328 = SURFACE_SIDE_STYLE('',(#277329,#277332)); +#277329 = SURFACE_STYLE_FILL_AREA(#277330); +#277330 = FILL_AREA_STYLE('',(#277331)); +#277331 = FILL_AREA_STYLE_COLOUR('',#272831); +#277332 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277333)); +#277333 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277334 = STYLED_ITEM('color',(#277335),#196539); +#277335 = PRESENTATION_STYLE_ASSIGNMENT((#277336)); +#277336 = SURFACE_STYLE_USAGE(.BOTH.,#277337); +#277337 = SURFACE_SIDE_STYLE('',(#277338,#277341)); +#277338 = SURFACE_STYLE_FILL_AREA(#277339); +#277339 = FILL_AREA_STYLE('',(#277340)); +#277340 = FILL_AREA_STYLE_COLOUR('',#272831); +#277341 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277342)); +#277342 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277343 = STYLED_ITEM('color',(#277344),#196987); +#277344 = PRESENTATION_STYLE_ASSIGNMENT((#277345)); +#277345 = SURFACE_STYLE_USAGE(.BOTH.,#277346); +#277346 = SURFACE_SIDE_STYLE('',(#277347,#277350)); +#277347 = SURFACE_STYLE_FILL_AREA(#277348); +#277348 = FILL_AREA_STYLE('',(#277349)); +#277349 = FILL_AREA_STYLE_COLOUR('',#272831); +#277350 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277351)); +#277351 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277352 = STYLED_ITEM('color',(#277353),#197180); +#277353 = PRESENTATION_STYLE_ASSIGNMENT((#277354)); +#277354 = SURFACE_STYLE_USAGE(.BOTH.,#277355); +#277355 = SURFACE_SIDE_STYLE('',(#277356,#277359)); +#277356 = SURFACE_STYLE_FILL_AREA(#277357); +#277357 = FILL_AREA_STYLE('',(#277358)); +#277358 = FILL_AREA_STYLE_COLOUR('',#272831); +#277359 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277360)); +#277360 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277361 = STYLED_ITEM('color',(#277362),#197416); +#277362 = PRESENTATION_STYLE_ASSIGNMENT((#277363)); +#277363 = SURFACE_STYLE_USAGE(.BOTH.,#277364); +#277364 = SURFACE_SIDE_STYLE('',(#277365,#277368)); +#277365 = SURFACE_STYLE_FILL_AREA(#277366); +#277366 = FILL_AREA_STYLE('',(#277367)); +#277367 = FILL_AREA_STYLE_COLOUR('',#272831); +#277368 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277369)); +#277369 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277370 = STYLED_ITEM('color',(#277371),#197623); +#277371 = PRESENTATION_STYLE_ASSIGNMENT((#277372)); +#277372 = SURFACE_STYLE_USAGE(.BOTH.,#277373); +#277373 = SURFACE_SIDE_STYLE('',(#277374,#277377)); +#277374 = SURFACE_STYLE_FILL_AREA(#277375); +#277375 = FILL_AREA_STYLE('',(#277376)); +#277376 = FILL_AREA_STYLE_COLOUR('',#272831); +#277377 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277378)); +#277378 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277379 = STYLED_ITEM('color',(#277380),#197826); +#277380 = PRESENTATION_STYLE_ASSIGNMENT((#277381)); +#277381 = SURFACE_STYLE_USAGE(.BOTH.,#277382); +#277382 = SURFACE_SIDE_STYLE('',(#277383,#277386)); +#277383 = SURFACE_STYLE_FILL_AREA(#277384); +#277384 = FILL_AREA_STYLE('',(#277385)); +#277385 = FILL_AREA_STYLE_COLOUR('',#272831); +#277386 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277387)); +#277387 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277388 = STYLED_ITEM('color',(#277389),#197982); +#277389 = PRESENTATION_STYLE_ASSIGNMENT((#277390)); +#277390 = SURFACE_STYLE_USAGE(.BOTH.,#277391); +#277391 = SURFACE_SIDE_STYLE('',(#277392,#277395)); +#277392 = SURFACE_STYLE_FILL_AREA(#277393); +#277393 = FILL_AREA_STYLE('',(#277394)); +#277394 = FILL_AREA_STYLE_COLOUR('',#272831); +#277395 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277396)); +#277396 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277397 = STYLED_ITEM('color',(#277398),#198174); +#277398 = PRESENTATION_STYLE_ASSIGNMENT((#277399)); +#277399 = SURFACE_STYLE_USAGE(.BOTH.,#277400); +#277400 = SURFACE_SIDE_STYLE('',(#277401,#277404)); +#277401 = SURFACE_STYLE_FILL_AREA(#277402); +#277402 = FILL_AREA_STYLE('',(#277403)); +#277403 = FILL_AREA_STYLE_COLOUR('',#272831); +#277404 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277405)); +#277405 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277406 = STYLED_ITEM('color',(#277407),#198300); +#277407 = PRESENTATION_STYLE_ASSIGNMENT((#277408)); +#277408 = SURFACE_STYLE_USAGE(.BOTH.,#277409); +#277409 = SURFACE_SIDE_STYLE('',(#277410,#277413)); +#277410 = SURFACE_STYLE_FILL_AREA(#277411); +#277411 = FILL_AREA_STYLE('',(#277412)); +#277412 = FILL_AREA_STYLE_COLOUR('',#272831); +#277413 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277414)); +#277414 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277415 = STYLED_ITEM('color',(#277416),#198558); +#277416 = PRESENTATION_STYLE_ASSIGNMENT((#277417)); +#277417 = SURFACE_STYLE_USAGE(.BOTH.,#277418); +#277418 = SURFACE_SIDE_STYLE('',(#277419,#277422)); +#277419 = SURFACE_STYLE_FILL_AREA(#277420); +#277420 = FILL_AREA_STYLE('',(#277421)); +#277421 = FILL_AREA_STYLE_COLOUR('',#272831); +#277422 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277423)); +#277423 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277424 = STYLED_ITEM('color',(#277425),#198660); +#277425 = PRESENTATION_STYLE_ASSIGNMENT((#277426)); +#277426 = SURFACE_STYLE_USAGE(.BOTH.,#277427); +#277427 = SURFACE_SIDE_STYLE('',(#277428,#277431)); +#277428 = SURFACE_STYLE_FILL_AREA(#277429); +#277429 = FILL_AREA_STYLE('',(#277430)); +#277430 = FILL_AREA_STYLE_COLOUR('',#272831); +#277431 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277432)); +#277432 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277433 = STYLED_ITEM('color',(#277434),#198779); +#277434 = PRESENTATION_STYLE_ASSIGNMENT((#277435)); +#277435 = SURFACE_STYLE_USAGE(.BOTH.,#277436); +#277436 = SURFACE_SIDE_STYLE('',(#277437,#277440)); +#277437 = SURFACE_STYLE_FILL_AREA(#277438); +#277438 = FILL_AREA_STYLE('',(#277439)); +#277439 = FILL_AREA_STYLE_COLOUR('',#272831); +#277440 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277441)); +#277441 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277442 = STYLED_ITEM('color',(#277443),#199028); +#277443 = PRESENTATION_STYLE_ASSIGNMENT((#277444)); +#277444 = SURFACE_STYLE_USAGE(.BOTH.,#277445); +#277445 = SURFACE_SIDE_STYLE('',(#277446,#277449)); +#277446 = SURFACE_STYLE_FILL_AREA(#277447); +#277447 = FILL_AREA_STYLE('',(#277448)); +#277448 = FILL_AREA_STYLE_COLOUR('',#272831); +#277449 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277450)); +#277450 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277451 = STYLED_ITEM('color',(#277452),#199180); +#277452 = PRESENTATION_STYLE_ASSIGNMENT((#277453)); +#277453 = SURFACE_STYLE_USAGE(.BOTH.,#277454); +#277454 = SURFACE_SIDE_STYLE('',(#277455,#277458)); +#277455 = SURFACE_STYLE_FILL_AREA(#277456); +#277456 = FILL_AREA_STYLE('',(#277457)); +#277457 = FILL_AREA_STYLE_COLOUR('',#272831); +#277458 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277459)); +#277459 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277460 = STYLED_ITEM('color',(#277461),#199315); +#277461 = PRESENTATION_STYLE_ASSIGNMENT((#277462)); +#277462 = SURFACE_STYLE_USAGE(.BOTH.,#277463); +#277463 = SURFACE_SIDE_STYLE('',(#277464,#277467)); +#277464 = SURFACE_STYLE_FILL_AREA(#277465); +#277465 = FILL_AREA_STYLE('',(#277466)); +#277466 = FILL_AREA_STYLE_COLOUR('',#272831); +#277467 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277468)); +#277468 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277469 = STYLED_ITEM('color',(#277470),#199499); +#277470 = PRESENTATION_STYLE_ASSIGNMENT((#277471)); +#277471 = SURFACE_STYLE_USAGE(.BOTH.,#277472); +#277472 = SURFACE_SIDE_STYLE('',(#277473,#277476)); +#277473 = SURFACE_STYLE_FILL_AREA(#277474); +#277474 = FILL_AREA_STYLE('',(#277475)); +#277475 = FILL_AREA_STYLE_COLOUR('',#272831); +#277476 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277477)); +#277477 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277478 = STYLED_ITEM('color',(#277479),#199593); +#277479 = PRESENTATION_STYLE_ASSIGNMENT((#277480)); +#277480 = SURFACE_STYLE_USAGE(.BOTH.,#277481); +#277481 = SURFACE_SIDE_STYLE('',(#277482,#277485)); +#277482 = SURFACE_STYLE_FILL_AREA(#277483); +#277483 = FILL_AREA_STYLE('',(#277484)); +#277484 = FILL_AREA_STYLE_COLOUR('',#272831); +#277485 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277486)); +#277486 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277487 = STYLED_ITEM('color',(#277488),#199728); +#277488 = PRESENTATION_STYLE_ASSIGNMENT((#277489)); +#277489 = SURFACE_STYLE_USAGE(.BOTH.,#277490); +#277490 = SURFACE_SIDE_STYLE('',(#277491,#277494)); +#277491 = SURFACE_STYLE_FILL_AREA(#277492); +#277492 = FILL_AREA_STYLE('',(#277493)); +#277493 = FILL_AREA_STYLE_COLOUR('',#272831); +#277494 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277495)); +#277495 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277496 = STYLED_ITEM('color',(#277497),#199838); +#277497 = PRESENTATION_STYLE_ASSIGNMENT((#277498)); +#277498 = SURFACE_STYLE_USAGE(.BOTH.,#277499); +#277499 = SURFACE_SIDE_STYLE('',(#277500,#277503)); +#277500 = SURFACE_STYLE_FILL_AREA(#277501); +#277501 = FILL_AREA_STYLE('',(#277502)); +#277502 = FILL_AREA_STYLE_COLOUR('',#272831); +#277503 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277504)); +#277504 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277505 = STYLED_ITEM('color',(#277506),#200032); +#277506 = PRESENTATION_STYLE_ASSIGNMENT((#277507)); +#277507 = SURFACE_STYLE_USAGE(.BOTH.,#277508); +#277508 = SURFACE_SIDE_STYLE('',(#277509,#277512)); +#277509 = SURFACE_STYLE_FILL_AREA(#277510); +#277510 = FILL_AREA_STYLE('',(#277511)); +#277511 = FILL_AREA_STYLE_COLOUR('',#272831); +#277512 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277513)); +#277513 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277514 = STYLED_ITEM('color',(#277515),#200151); +#277515 = PRESENTATION_STYLE_ASSIGNMENT((#277516)); +#277516 = SURFACE_STYLE_USAGE(.BOTH.,#277517); +#277517 = SURFACE_SIDE_STYLE('',(#277518,#277521)); +#277518 = SURFACE_STYLE_FILL_AREA(#277519); +#277519 = FILL_AREA_STYLE('',(#277520)); +#277520 = FILL_AREA_STYLE_COLOUR('',#272831); +#277521 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277522)); +#277522 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277523 = STYLED_ITEM('color',(#277524),#200203); +#277524 = PRESENTATION_STYLE_ASSIGNMENT((#277525)); +#277525 = SURFACE_STYLE_USAGE(.BOTH.,#277526); +#277526 = SURFACE_SIDE_STYLE('',(#277527,#277530)); +#277527 = SURFACE_STYLE_FILL_AREA(#277528); +#277528 = FILL_AREA_STYLE('',(#277529)); +#277529 = FILL_AREA_STYLE_COLOUR('',#272831); +#277530 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277531)); +#277531 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277532 = STYLED_ITEM('color',(#277533),#200345); +#277533 = PRESENTATION_STYLE_ASSIGNMENT((#277534)); +#277534 = SURFACE_STYLE_USAGE(.BOTH.,#277535); +#277535 = SURFACE_SIDE_STYLE('',(#277536,#277539)); +#277536 = SURFACE_STYLE_FILL_AREA(#277537); +#277537 = FILL_AREA_STYLE('',(#277538)); +#277538 = FILL_AREA_STYLE_COLOUR('',#272831); +#277539 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277540)); +#277540 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277541 = STYLED_ITEM('color',(#277542),#200523); +#277542 = PRESENTATION_STYLE_ASSIGNMENT((#277543)); +#277543 = SURFACE_STYLE_USAGE(.BOTH.,#277544); +#277544 = SURFACE_SIDE_STYLE('',(#277545,#277548)); +#277545 = SURFACE_STYLE_FILL_AREA(#277546); +#277546 = FILL_AREA_STYLE('',(#277547)); +#277547 = FILL_AREA_STYLE_COLOUR('',#272831); +#277548 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277549)); +#277549 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277550 = STYLED_ITEM('color',(#277551),#200688); +#277551 = PRESENTATION_STYLE_ASSIGNMENT((#277552)); +#277552 = SURFACE_STYLE_USAGE(.BOTH.,#277553); +#277553 = SURFACE_SIDE_STYLE('',(#277554,#277557)); +#277554 = SURFACE_STYLE_FILL_AREA(#277555); +#277555 = FILL_AREA_STYLE('',(#277556)); +#277556 = FILL_AREA_STYLE_COLOUR('',#272831); +#277557 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277558)); +#277558 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277559 = STYLED_ITEM('color',(#277560),#200782); +#277560 = PRESENTATION_STYLE_ASSIGNMENT((#277561)); +#277561 = SURFACE_STYLE_USAGE(.BOTH.,#277562); +#277562 = SURFACE_SIDE_STYLE('',(#277563,#277566)); +#277563 = SURFACE_STYLE_FILL_AREA(#277564); +#277564 = FILL_AREA_STYLE('',(#277565)); +#277565 = FILL_AREA_STYLE_COLOUR('',#272831); +#277566 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277567)); +#277567 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277568 = STYLED_ITEM('color',(#277569),#200920); +#277569 = PRESENTATION_STYLE_ASSIGNMENT((#277570)); +#277570 = SURFACE_STYLE_USAGE(.BOTH.,#277571); +#277571 = SURFACE_SIDE_STYLE('',(#277572,#277575)); +#277572 = SURFACE_STYLE_FILL_AREA(#277573); +#277573 = FILL_AREA_STYLE('',(#277574)); +#277574 = FILL_AREA_STYLE_COLOUR('',#272831); +#277575 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277576)); +#277576 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277577 = STYLED_ITEM('color',(#277578),#201055); +#277578 = PRESENTATION_STYLE_ASSIGNMENT((#277579)); +#277579 = SURFACE_STYLE_USAGE(.BOTH.,#277580); +#277580 = SURFACE_SIDE_STYLE('',(#277581,#277584)); +#277581 = SURFACE_STYLE_FILL_AREA(#277582); +#277582 = FILL_AREA_STYLE('',(#277583)); +#277583 = FILL_AREA_STYLE_COLOUR('',#272831); +#277584 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277585)); +#277585 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277586 = STYLED_ITEM('color',(#277587),#201233); +#277587 = PRESENTATION_STYLE_ASSIGNMENT((#277588)); +#277588 = SURFACE_STYLE_USAGE(.BOTH.,#277589); +#277589 = SURFACE_SIDE_STYLE('',(#277590,#277593)); +#277590 = SURFACE_STYLE_FILL_AREA(#277591); +#277591 = FILL_AREA_STYLE('',(#277592)); +#277592 = FILL_AREA_STYLE_COLOUR('',#272831); +#277593 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277594)); +#277594 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277595 = STYLED_ITEM('color',(#277596),#201413); +#277596 = PRESENTATION_STYLE_ASSIGNMENT((#277597)); +#277597 = SURFACE_STYLE_USAGE(.BOTH.,#277598); +#277598 = SURFACE_SIDE_STYLE('',(#277599,#277602)); +#277599 = SURFACE_STYLE_FILL_AREA(#277600); +#277600 = FILL_AREA_STYLE('',(#277601)); +#277601 = FILL_AREA_STYLE_COLOUR('',#272831); +#277602 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277603)); +#277603 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277604 = STYLED_ITEM('color',(#277605),#201591); +#277605 = PRESENTATION_STYLE_ASSIGNMENT((#277606)); +#277606 = SURFACE_STYLE_USAGE(.BOTH.,#277607); +#277607 = SURFACE_SIDE_STYLE('',(#277608,#277611)); +#277608 = SURFACE_STYLE_FILL_AREA(#277609); +#277609 = FILL_AREA_STYLE('',(#277610)); +#277610 = FILL_AREA_STYLE_COLOUR('',#272831); +#277611 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277612)); +#277612 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277613 = STYLED_ITEM('color',(#277614),#201775); +#277614 = PRESENTATION_STYLE_ASSIGNMENT((#277615)); +#277615 = SURFACE_STYLE_USAGE(.BOTH.,#277616); +#277616 = SURFACE_SIDE_STYLE('',(#277617,#277620)); +#277617 = SURFACE_STYLE_FILL_AREA(#277618); +#277618 = FILL_AREA_STYLE('',(#277619)); +#277619 = FILL_AREA_STYLE_COLOUR('',#272831); +#277620 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277621)); +#277621 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277622 = STYLED_ITEM('color',(#277623),#201819); +#277623 = PRESENTATION_STYLE_ASSIGNMENT((#277624)); +#277624 = SURFACE_STYLE_USAGE(.BOTH.,#277625); +#277625 = SURFACE_SIDE_STYLE('',(#277626,#277629)); +#277626 = SURFACE_STYLE_FILL_AREA(#277627); +#277627 = FILL_AREA_STYLE('',(#277628)); +#277628 = FILL_AREA_STYLE_COLOUR('',#272831); +#277629 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277630)); +#277630 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277631 = STYLED_ITEM('color',(#277632),#201871); +#277632 = PRESENTATION_STYLE_ASSIGNMENT((#277633)); +#277633 = SURFACE_STYLE_USAGE(.BOTH.,#277634); +#277634 = SURFACE_SIDE_STYLE('',(#277635,#277638)); +#277635 = SURFACE_STYLE_FILL_AREA(#277636); +#277636 = FILL_AREA_STYLE('',(#277637)); +#277637 = FILL_AREA_STYLE_COLOUR('',#272831); +#277638 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277639)); +#277639 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277640 = STYLED_ITEM('color',(#277641),#202083); +#277641 = PRESENTATION_STYLE_ASSIGNMENT((#277642)); +#277642 = SURFACE_STYLE_USAGE(.BOTH.,#277643); +#277643 = SURFACE_SIDE_STYLE('',(#277644,#277647)); +#277644 = SURFACE_STYLE_FILL_AREA(#277645); +#277645 = FILL_AREA_STYLE('',(#277646)); +#277646 = FILL_AREA_STYLE_COLOUR('',#272831); +#277647 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277648)); +#277648 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277649 = STYLED_ITEM('color',(#277650),#202332); +#277650 = PRESENTATION_STYLE_ASSIGNMENT((#277651)); +#277651 = SURFACE_STYLE_USAGE(.BOTH.,#277652); +#277652 = SURFACE_SIDE_STYLE('',(#277653,#277656)); +#277653 = SURFACE_STYLE_FILL_AREA(#277654); +#277654 = FILL_AREA_STYLE('',(#277655)); +#277655 = FILL_AREA_STYLE_COLOUR('',#272831); +#277656 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277657)); +#277657 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277658 = STYLED_ITEM('color',(#277659),#202442); +#277659 = PRESENTATION_STYLE_ASSIGNMENT((#277660)); +#277660 = SURFACE_STYLE_USAGE(.BOTH.,#277661); +#277661 = SURFACE_SIDE_STYLE('',(#277662,#277665)); +#277662 = SURFACE_STYLE_FILL_AREA(#277663); +#277663 = FILL_AREA_STYLE('',(#277664)); +#277664 = FILL_AREA_STYLE_COLOUR('',#272831); +#277665 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277666)); +#277666 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277667 = STYLED_ITEM('color',(#277668),#202636); +#277668 = PRESENTATION_STYLE_ASSIGNMENT((#277669)); +#277669 = SURFACE_STYLE_USAGE(.BOTH.,#277670); +#277670 = SURFACE_SIDE_STYLE('',(#277671,#277674)); +#277671 = SURFACE_STYLE_FILL_AREA(#277672); +#277672 = FILL_AREA_STYLE('',(#277673)); +#277673 = FILL_AREA_STYLE_COLOUR('',#272831); +#277674 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277675)); +#277675 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277676 = STYLED_ITEM('color',(#277677),#202916); +#277677 = PRESENTATION_STYLE_ASSIGNMENT((#277678)); +#277678 = SURFACE_STYLE_USAGE(.BOTH.,#277679); +#277679 = SURFACE_SIDE_STYLE('',(#277680,#277683)); +#277680 = SURFACE_STYLE_FILL_AREA(#277681); +#277681 = FILL_AREA_STYLE('',(#277682)); +#277682 = FILL_AREA_STYLE_COLOUR('',#272831); +#277683 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277684)); +#277684 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277685 = STYLED_ITEM('color',(#277686),#202968); +#277686 = PRESENTATION_STYLE_ASSIGNMENT((#277687)); +#277687 = SURFACE_STYLE_USAGE(.BOTH.,#277688); +#277688 = SURFACE_SIDE_STYLE('',(#277689,#277692)); +#277689 = SURFACE_STYLE_FILL_AREA(#277690); +#277690 = FILL_AREA_STYLE('',(#277691)); +#277691 = FILL_AREA_STYLE_COLOUR('',#272831); +#277692 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277693)); +#277693 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277694 = STYLED_ITEM('color',(#277695),#203169); +#277695 = PRESENTATION_STYLE_ASSIGNMENT((#277696)); +#277696 = SURFACE_STYLE_USAGE(.BOTH.,#277697); +#277697 = SURFACE_SIDE_STYLE('',(#277698,#277701)); +#277698 = SURFACE_STYLE_FILL_AREA(#277699); +#277699 = FILL_AREA_STYLE('',(#277700)); +#277700 = FILL_AREA_STYLE_COLOUR('',#272831); +#277701 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277702)); +#277702 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277703 = STYLED_ITEM('color',(#277704),#203449); +#277704 = PRESENTATION_STYLE_ASSIGNMENT((#277705)); +#277705 = SURFACE_STYLE_USAGE(.BOTH.,#277706); +#277706 = SURFACE_SIDE_STYLE('',(#277707,#277710)); +#277707 = SURFACE_STYLE_FILL_AREA(#277708); +#277708 = FILL_AREA_STYLE('',(#277709)); +#277709 = FILL_AREA_STYLE_COLOUR('',#272831); +#277710 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277711)); +#277711 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277712 = STYLED_ITEM('color',(#277713),#203717); +#277713 = PRESENTATION_STYLE_ASSIGNMENT((#277714)); +#277714 = SURFACE_STYLE_USAGE(.BOTH.,#277715); +#277715 = SURFACE_SIDE_STYLE('',(#277716,#277719)); +#277716 = SURFACE_STYLE_FILL_AREA(#277717); +#277717 = FILL_AREA_STYLE('',(#277718)); +#277718 = FILL_AREA_STYLE_COLOUR('',#272831); +#277719 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277720)); +#277720 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277721 = STYLED_ITEM('color',(#277722),#203997); +#277722 = PRESENTATION_STYLE_ASSIGNMENT((#277723)); +#277723 = SURFACE_STYLE_USAGE(.BOTH.,#277724); +#277724 = SURFACE_SIDE_STYLE('',(#277725,#277728)); +#277725 = SURFACE_STYLE_FILL_AREA(#277726); +#277726 = FILL_AREA_STYLE('',(#277727)); +#277727 = FILL_AREA_STYLE_COLOUR('',#272831); +#277728 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277729)); +#277729 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277730 = STYLED_ITEM('color',(#277731),#204265); +#277731 = PRESENTATION_STYLE_ASSIGNMENT((#277732)); +#277732 = SURFACE_STYLE_USAGE(.BOTH.,#277733); +#277733 = SURFACE_SIDE_STYLE('',(#277734,#277737)); +#277734 = SURFACE_STYLE_FILL_AREA(#277735); +#277735 = FILL_AREA_STYLE('',(#277736)); +#277736 = FILL_AREA_STYLE_COLOUR('',#272831); +#277737 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277738)); +#277738 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277739 = STYLED_ITEM('color',(#277740),#204533); +#277740 = PRESENTATION_STYLE_ASSIGNMENT((#277741)); +#277741 = SURFACE_STYLE_USAGE(.BOTH.,#277742); +#277742 = SURFACE_SIDE_STYLE('',(#277743,#277746)); +#277743 = SURFACE_STYLE_FILL_AREA(#277744); +#277744 = FILL_AREA_STYLE('',(#277745)); +#277745 = FILL_AREA_STYLE_COLOUR('',#272831); +#277746 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277747)); +#277747 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277748 = STYLED_ITEM('color',(#277749),#204801); +#277749 = PRESENTATION_STYLE_ASSIGNMENT((#277750)); +#277750 = SURFACE_STYLE_USAGE(.BOTH.,#277751); +#277751 = SURFACE_SIDE_STYLE('',(#277752,#277755)); +#277752 = SURFACE_STYLE_FILL_AREA(#277753); +#277753 = FILL_AREA_STYLE('',(#277754)); +#277754 = FILL_AREA_STYLE_COLOUR('',#272831); +#277755 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277756)); +#277756 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277757 = STYLED_ITEM('color',(#277758),#205069); +#277758 = PRESENTATION_STYLE_ASSIGNMENT((#277759)); +#277759 = SURFACE_STYLE_USAGE(.BOTH.,#277760); +#277760 = SURFACE_SIDE_STYLE('',(#277761,#277764)); +#277761 = SURFACE_STYLE_FILL_AREA(#277762); +#277762 = FILL_AREA_STYLE('',(#277763)); +#277763 = FILL_AREA_STYLE_COLOUR('',#272831); +#277764 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277765)); +#277765 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277766 = STYLED_ITEM('color',(#277767),#205179); +#277767 = PRESENTATION_STYLE_ASSIGNMENT((#277768)); +#277768 = SURFACE_STYLE_USAGE(.BOTH.,#277769); +#277769 = SURFACE_SIDE_STYLE('',(#277770,#277773)); +#277770 = SURFACE_STYLE_FILL_AREA(#277771); +#277771 = FILL_AREA_STYLE('',(#277772)); +#277772 = FILL_AREA_STYLE_COLOUR('',#272831); +#277773 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277774)); +#277774 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277775 = STYLED_ITEM('color',(#277776),#205314); +#277776 = PRESENTATION_STYLE_ASSIGNMENT((#277777)); +#277777 = SURFACE_STYLE_USAGE(.BOTH.,#277778); +#277778 = SURFACE_SIDE_STYLE('',(#277779,#277782)); +#277779 = SURFACE_STYLE_FILL_AREA(#277780); +#277780 = FILL_AREA_STYLE('',(#277781)); +#277781 = FILL_AREA_STYLE_COLOUR('',#272831); +#277782 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277783)); +#277783 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277784 = STYLED_ITEM('color',(#277785),#205664); +#277785 = PRESENTATION_STYLE_ASSIGNMENT((#277786)); +#277786 = SURFACE_STYLE_USAGE(.BOTH.,#277787); +#277787 = SURFACE_SIDE_STYLE('',(#277788,#277791)); +#277788 = SURFACE_STYLE_FILL_AREA(#277789); +#277789 = FILL_AREA_STYLE('',(#277790)); +#277790 = FILL_AREA_STYLE_COLOUR('',#272831); +#277791 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277792)); +#277792 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277793 = STYLED_ITEM('color',(#277794),#205874); +#277794 = PRESENTATION_STYLE_ASSIGNMENT((#277795)); +#277795 = SURFACE_STYLE_USAGE(.BOTH.,#277796); +#277796 = SURFACE_SIDE_STYLE('',(#277797,#277800)); +#277797 = SURFACE_STYLE_FILL_AREA(#277798); +#277798 = FILL_AREA_STYLE('',(#277799)); +#277799 = FILL_AREA_STYLE_COLOUR('',#272831); +#277800 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277801)); +#277801 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277802 = STYLED_ITEM('color',(#277803),#205984); +#277803 = PRESENTATION_STYLE_ASSIGNMENT((#277804)); +#277804 = SURFACE_STYLE_USAGE(.BOTH.,#277805); +#277805 = SURFACE_SIDE_STYLE('',(#277806,#277809)); +#277806 = SURFACE_STYLE_FILL_AREA(#277807); +#277807 = FILL_AREA_STYLE('',(#277808)); +#277808 = FILL_AREA_STYLE_COLOUR('',#272831); +#277809 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277810)); +#277810 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277811 = STYLED_ITEM('color',(#277812),#206061); +#277812 = PRESENTATION_STYLE_ASSIGNMENT((#277813)); +#277813 = SURFACE_STYLE_USAGE(.BOTH.,#277814); +#277814 = SURFACE_SIDE_STYLE('',(#277815,#277818)); +#277815 = SURFACE_STYLE_FILL_AREA(#277816); +#277816 = FILL_AREA_STYLE('',(#277817)); +#277817 = FILL_AREA_STYLE_COLOUR('',#272831); +#277818 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277819)); +#277819 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277820 = STYLED_ITEM('color',(#277821),#206188); +#277821 = PRESENTATION_STYLE_ASSIGNMENT((#277822)); +#277822 = SURFACE_STYLE_USAGE(.BOTH.,#277823); +#277823 = SURFACE_SIDE_STYLE('',(#277824,#277827)); +#277824 = SURFACE_STYLE_FILL_AREA(#277825); +#277825 = FILL_AREA_STYLE('',(#277826)); +#277826 = FILL_AREA_STYLE_COLOUR('',#272831); +#277827 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277828)); +#277828 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277829 = STYLED_ITEM('color',(#277830),#206273); +#277830 = PRESENTATION_STYLE_ASSIGNMENT((#277831)); +#277831 = SURFACE_STYLE_USAGE(.BOTH.,#277832); +#277832 = SURFACE_SIDE_STYLE('',(#277833,#277836)); +#277833 = SURFACE_STYLE_FILL_AREA(#277834); +#277834 = FILL_AREA_STYLE('',(#277835)); +#277835 = FILL_AREA_STYLE_COLOUR('',#272831); +#277836 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277837)); +#277837 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277838 = STYLED_ITEM('color',(#277839),#206358); +#277839 = PRESENTATION_STYLE_ASSIGNMENT((#277840)); +#277840 = SURFACE_STYLE_USAGE(.BOTH.,#277841); +#277841 = SURFACE_SIDE_STYLE('',(#277842,#277845)); +#277842 = SURFACE_STYLE_FILL_AREA(#277843); +#277843 = FILL_AREA_STYLE('',(#277844)); +#277844 = FILL_AREA_STYLE_COLOUR('',#272831); +#277845 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277846)); +#277846 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277847 = STYLED_ITEM('color',(#277848),#206459); +#277848 = PRESENTATION_STYLE_ASSIGNMENT((#277849)); +#277849 = SURFACE_STYLE_USAGE(.BOTH.,#277850); +#277850 = SURFACE_SIDE_STYLE('',(#277851,#277854)); +#277851 = SURFACE_STYLE_FILL_AREA(#277852); +#277852 = FILL_AREA_STYLE('',(#277853)); +#277853 = FILL_AREA_STYLE_COLOUR('',#272831); +#277854 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277855)); +#277855 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277856 = STYLED_ITEM('color',(#277857),#206660); +#277857 = PRESENTATION_STYLE_ASSIGNMENT((#277858)); +#277858 = SURFACE_STYLE_USAGE(.BOTH.,#277859); +#277859 = SURFACE_SIDE_STYLE('',(#277860,#277863)); +#277860 = SURFACE_STYLE_FILL_AREA(#277861); +#277861 = FILL_AREA_STYLE('',(#277862)); +#277862 = FILL_AREA_STYLE_COLOUR('',#272831); +#277863 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277864)); +#277864 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277865 = STYLED_ITEM('color',(#277866),#206770); +#277866 = PRESENTATION_STYLE_ASSIGNMENT((#277867)); +#277867 = SURFACE_STYLE_USAGE(.BOTH.,#277868); +#277868 = SURFACE_SIDE_STYLE('',(#277869,#277872)); +#277869 = SURFACE_STYLE_FILL_AREA(#277870); +#277870 = FILL_AREA_STYLE('',(#277871)); +#277871 = FILL_AREA_STYLE_COLOUR('',#272831); +#277872 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277873)); +#277873 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277874 = STYLED_ITEM('color',(#277875),#206864); +#277875 = PRESENTATION_STYLE_ASSIGNMENT((#277876)); +#277876 = SURFACE_STYLE_USAGE(.BOTH.,#277877); +#277877 = SURFACE_SIDE_STYLE('',(#277878,#277881)); +#277878 = SURFACE_STYLE_FILL_AREA(#277879); +#277879 = FILL_AREA_STYLE('',(#277880)); +#277880 = FILL_AREA_STYLE_COLOUR('',#272831); +#277881 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277882)); +#277882 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277883 = STYLED_ITEM('color',(#277884),#206999); +#277884 = PRESENTATION_STYLE_ASSIGNMENT((#277885)); +#277885 = SURFACE_STYLE_USAGE(.BOTH.,#277886); +#277886 = SURFACE_SIDE_STYLE('',(#277887,#277890)); +#277887 = SURFACE_STYLE_FILL_AREA(#277888); +#277888 = FILL_AREA_STYLE('',(#277889)); +#277889 = FILL_AREA_STYLE_COLOUR('',#272831); +#277890 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277891)); +#277891 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277892 = STYLED_ITEM('color',(#277893),#207177); +#277893 = PRESENTATION_STYLE_ASSIGNMENT((#277894)); +#277894 = SURFACE_STYLE_USAGE(.BOTH.,#277895); +#277895 = SURFACE_SIDE_STYLE('',(#277896,#277899)); +#277896 = SURFACE_STYLE_FILL_AREA(#277897); +#277897 = FILL_AREA_STYLE('',(#277898)); +#277898 = FILL_AREA_STYLE_COLOUR('',#272831); +#277899 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277900)); +#277900 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277901 = STYLED_ITEM('color',(#277902),#207254); +#277902 = PRESENTATION_STYLE_ASSIGNMENT((#277903)); +#277903 = SURFACE_STYLE_USAGE(.BOTH.,#277904); +#277904 = SURFACE_SIDE_STYLE('',(#277905,#277908)); +#277905 = SURFACE_STYLE_FILL_AREA(#277906); +#277906 = FILL_AREA_STYLE('',(#277907)); +#277907 = FILL_AREA_STYLE_COLOUR('',#272831); +#277908 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277909)); +#277909 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277910 = STYLED_ITEM('color',(#277911),#207438); +#277911 = PRESENTATION_STYLE_ASSIGNMENT((#277912)); +#277912 = SURFACE_STYLE_USAGE(.BOTH.,#277913); +#277913 = SURFACE_SIDE_STYLE('',(#277914,#277917)); +#277914 = SURFACE_STYLE_FILL_AREA(#277915); +#277915 = FILL_AREA_STYLE('',(#277916)); +#277916 = FILL_AREA_STYLE_COLOUR('',#272831); +#277917 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277918)); +#277918 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277919 = STYLED_ITEM('color',(#277920),#207523); +#277920 = PRESENTATION_STYLE_ASSIGNMENT((#277921)); +#277921 = SURFACE_STYLE_USAGE(.BOTH.,#277922); +#277922 = SURFACE_SIDE_STYLE('',(#277923,#277926)); +#277923 = SURFACE_STYLE_FILL_AREA(#277924); +#277924 = FILL_AREA_STYLE('',(#277925)); +#277925 = FILL_AREA_STYLE_COLOUR('',#272831); +#277926 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277927)); +#277927 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277928 = STYLED_ITEM('color',(#277929),#207600); +#277929 = PRESENTATION_STYLE_ASSIGNMENT((#277930)); +#277930 = SURFACE_STYLE_USAGE(.BOTH.,#277931); +#277931 = SURFACE_SIDE_STYLE('',(#277932,#277935)); +#277932 = SURFACE_STYLE_FILL_AREA(#277933); +#277933 = FILL_AREA_STYLE('',(#277934)); +#277934 = FILL_AREA_STYLE_COLOUR('',#272831); +#277935 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277936)); +#277936 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277937 = STYLED_ITEM('color',(#277938),#207677); +#277938 = PRESENTATION_STYLE_ASSIGNMENT((#277939)); +#277939 = SURFACE_STYLE_USAGE(.BOTH.,#277940); +#277940 = SURFACE_SIDE_STYLE('',(#277941,#277944)); +#277941 = SURFACE_STYLE_FILL_AREA(#277942); +#277942 = FILL_AREA_STYLE('',(#277943)); +#277943 = FILL_AREA_STYLE_COLOUR('',#272831); +#277944 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277945)); +#277945 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277946 = STYLED_ITEM('color',(#277947),#207754); +#277947 = PRESENTATION_STYLE_ASSIGNMENT((#277948)); +#277948 = SURFACE_STYLE_USAGE(.BOTH.,#277949); +#277949 = SURFACE_SIDE_STYLE('',(#277950,#277953)); +#277950 = SURFACE_STYLE_FILL_AREA(#277951); +#277951 = FILL_AREA_STYLE('',(#277952)); +#277952 = FILL_AREA_STYLE_COLOUR('',#272831); +#277953 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277954)); +#277954 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277955 = STYLED_ITEM('color',(#277956),#207831); +#277956 = PRESENTATION_STYLE_ASSIGNMENT((#277957)); +#277957 = SURFACE_STYLE_USAGE(.BOTH.,#277958); +#277958 = SURFACE_SIDE_STYLE('',(#277959,#277962)); +#277959 = SURFACE_STYLE_FILL_AREA(#277960); +#277960 = FILL_AREA_STYLE('',(#277961)); +#277961 = FILL_AREA_STYLE_COLOUR('',#272831); +#277962 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277963)); +#277963 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277964 = STYLED_ITEM('color',(#277965),#207916); +#277965 = PRESENTATION_STYLE_ASSIGNMENT((#277966)); +#277966 = SURFACE_STYLE_USAGE(.BOTH.,#277967); +#277967 = SURFACE_SIDE_STYLE('',(#277968,#277971)); +#277968 = SURFACE_STYLE_FILL_AREA(#277969); +#277969 = FILL_AREA_STYLE('',(#277970)); +#277970 = FILL_AREA_STYLE_COLOUR('',#272831); +#277971 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277972)); +#277972 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277973 = STYLED_ITEM('color',(#277974),#208001); +#277974 = PRESENTATION_STYLE_ASSIGNMENT((#277975)); +#277975 = SURFACE_STYLE_USAGE(.BOTH.,#277976); +#277976 = SURFACE_SIDE_STYLE('',(#277977,#277980)); +#277977 = SURFACE_STYLE_FILL_AREA(#277978); +#277978 = FILL_AREA_STYLE('',(#277979)); +#277979 = FILL_AREA_STYLE_COLOUR('',#272831); +#277980 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277981)); +#277981 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277982 = STYLED_ITEM('color',(#277983),#208244); +#277983 = PRESENTATION_STYLE_ASSIGNMENT((#277984)); +#277984 = SURFACE_STYLE_USAGE(.BOTH.,#277985); +#277985 = SURFACE_SIDE_STYLE('',(#277986,#277989)); +#277986 = SURFACE_STYLE_FILL_AREA(#277987); +#277987 = FILL_AREA_STYLE('',(#277988)); +#277988 = FILL_AREA_STYLE_COLOUR('',#272831); +#277989 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277990)); +#277990 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#277991 = STYLED_ITEM('color',(#277992),#208347); +#277992 = PRESENTATION_STYLE_ASSIGNMENT((#277993)); +#277993 = SURFACE_STYLE_USAGE(.BOTH.,#277994); +#277994 = SURFACE_SIDE_STYLE('',(#277995,#277998)); +#277995 = SURFACE_STYLE_FILL_AREA(#277996); +#277996 = FILL_AREA_STYLE('',(#277997)); +#277997 = FILL_AREA_STYLE_COLOUR('',#272831); +#277998 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#277999)); +#277999 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278000 = STYLED_ITEM('color',(#278001),#208432); +#278001 = PRESENTATION_STYLE_ASSIGNMENT((#278002)); +#278002 = SURFACE_STYLE_USAGE(.BOTH.,#278003); +#278003 = SURFACE_SIDE_STYLE('',(#278004,#278007)); +#278004 = SURFACE_STYLE_FILL_AREA(#278005); +#278005 = FILL_AREA_STYLE('',(#278006)); +#278006 = FILL_AREA_STYLE_COLOUR('',#272831); +#278007 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278008)); +#278008 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278009 = STYLED_ITEM('color',(#278010),#208599); +#278010 = PRESENTATION_STYLE_ASSIGNMENT((#278011)); +#278011 = SURFACE_STYLE_USAGE(.BOTH.,#278012); +#278012 = SURFACE_SIDE_STYLE('',(#278013,#278016)); +#278013 = SURFACE_STYLE_FILL_AREA(#278014); +#278014 = FILL_AREA_STYLE('',(#278015)); +#278015 = FILL_AREA_STYLE_COLOUR('',#272831); +#278016 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278017)); +#278017 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278018 = STYLED_ITEM('color',(#278019),#208793); +#278019 = PRESENTATION_STYLE_ASSIGNMENT((#278020)); +#278020 = SURFACE_STYLE_USAGE(.BOTH.,#278021); +#278021 = SURFACE_SIDE_STYLE('',(#278022,#278025)); +#278022 = SURFACE_STYLE_FILL_AREA(#278023); +#278023 = FILL_AREA_STYLE('',(#278024)); +#278024 = FILL_AREA_STYLE_COLOUR('',#272831); +#278025 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278026)); +#278026 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278027 = STYLED_ITEM('color',(#278028),#208987); +#278028 = PRESENTATION_STYLE_ASSIGNMENT((#278029)); +#278029 = SURFACE_STYLE_USAGE(.BOTH.,#278030); +#278030 = SURFACE_SIDE_STYLE('',(#278031,#278034)); +#278031 = SURFACE_STYLE_FILL_AREA(#278032); +#278032 = FILL_AREA_STYLE('',(#278033)); +#278033 = FILL_AREA_STYLE_COLOUR('',#272831); +#278034 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278035)); +#278035 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278036 = STYLED_ITEM('color',(#278037),#209097); +#278037 = PRESENTATION_STYLE_ASSIGNMENT((#278038)); +#278038 = SURFACE_STYLE_USAGE(.BOTH.,#278039); +#278039 = SURFACE_SIDE_STYLE('',(#278040,#278043)); +#278040 = SURFACE_STYLE_FILL_AREA(#278041); +#278041 = FILL_AREA_STYLE('',(#278042)); +#278042 = FILL_AREA_STYLE_COLOUR('',#272831); +#278043 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278044)); +#278044 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278045 = STYLED_ITEM('color',(#278046),#209232); +#278046 = PRESENTATION_STYLE_ASSIGNMENT((#278047)); +#278047 = SURFACE_STYLE_USAGE(.BOTH.,#278048); +#278048 = SURFACE_SIDE_STYLE('',(#278049,#278052)); +#278049 = SURFACE_STYLE_FILL_AREA(#278050); +#278050 = FILL_AREA_STYLE('',(#278051)); +#278051 = FILL_AREA_STYLE_COLOUR('',#272831); +#278052 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278053)); +#278053 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278054 = STYLED_ITEM('color',(#278055),#209375); +#278055 = PRESENTATION_STYLE_ASSIGNMENT((#278056)); +#278056 = SURFACE_STYLE_USAGE(.BOTH.,#278057); +#278057 = SURFACE_SIDE_STYLE('',(#278058,#278061)); +#278058 = SURFACE_STYLE_FILL_AREA(#278059); +#278059 = FILL_AREA_STYLE('',(#278060)); +#278060 = FILL_AREA_STYLE_COLOUR('',#272831); +#278061 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278062)); +#278062 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278063 = STYLED_ITEM('color',(#278064),#209469); +#278064 = PRESENTATION_STYLE_ASSIGNMENT((#278065)); +#278065 = SURFACE_STYLE_USAGE(.BOTH.,#278066); +#278066 = SURFACE_SIDE_STYLE('',(#278067,#278070)); +#278067 = SURFACE_STYLE_FILL_AREA(#278068); +#278068 = FILL_AREA_STYLE('',(#278069)); +#278069 = FILL_AREA_STYLE_COLOUR('',#272831); +#278070 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278071)); +#278071 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278072 = STYLED_ITEM('color',(#278073),#209562); +#278073 = PRESENTATION_STYLE_ASSIGNMENT((#278074)); +#278074 = SURFACE_STYLE_USAGE(.BOTH.,#278075); +#278075 = SURFACE_SIDE_STYLE('',(#278076,#278079)); +#278076 = SURFACE_STYLE_FILL_AREA(#278077); +#278077 = FILL_AREA_STYLE('',(#278078)); +#278078 = FILL_AREA_STYLE_COLOUR('',#272831); +#278079 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278080)); +#278080 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278081 = STYLED_ITEM('color',(#278082),#209665); +#278082 = PRESENTATION_STYLE_ASSIGNMENT((#278083)); +#278083 = SURFACE_STYLE_USAGE(.BOTH.,#278084); +#278084 = SURFACE_SIDE_STYLE('',(#278085,#278088)); +#278085 = SURFACE_STYLE_FILL_AREA(#278086); +#278086 = FILL_AREA_STYLE('',(#278087)); +#278087 = FILL_AREA_STYLE_COLOUR('',#272831); +#278088 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278089)); +#278089 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278090 = STYLED_ITEM('color',(#278091),#209833); +#278091 = PRESENTATION_STYLE_ASSIGNMENT((#278092)); +#278092 = SURFACE_STYLE_USAGE(.BOTH.,#278093); +#278093 = SURFACE_SIDE_STYLE('',(#278094,#278097)); +#278094 = SURFACE_STYLE_FILL_AREA(#278095); +#278095 = FILL_AREA_STYLE('',(#278096)); +#278096 = FILL_AREA_STYLE_COLOUR('',#272831); +#278097 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278098)); +#278098 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278099 = STYLED_ITEM('color',(#278100),#209943); +#278100 = PRESENTATION_STYLE_ASSIGNMENT((#278101)); +#278101 = SURFACE_STYLE_USAGE(.BOTH.,#278102); +#278102 = SURFACE_SIDE_STYLE('',(#278103,#278106)); +#278103 = SURFACE_STYLE_FILL_AREA(#278104); +#278104 = FILL_AREA_STYLE('',(#278105)); +#278105 = FILL_AREA_STYLE_COLOUR('',#272831); +#278106 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278107)); +#278107 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278108 = STYLED_ITEM('color',(#278109),#210114); +#278109 = PRESENTATION_STYLE_ASSIGNMENT((#278110)); +#278110 = SURFACE_STYLE_USAGE(.BOTH.,#278111); +#278111 = SURFACE_SIDE_STYLE('',(#278112,#278115)); +#278112 = SURFACE_STYLE_FILL_AREA(#278113); +#278113 = FILL_AREA_STYLE('',(#278114)); +#278114 = FILL_AREA_STYLE_COLOUR('',#272831); +#278115 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278116)); +#278116 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278117 = STYLED_ITEM('color',(#278118),#210174); +#278118 = PRESENTATION_STYLE_ASSIGNMENT((#278119)); +#278119 = SURFACE_STYLE_USAGE(.BOTH.,#278120); +#278120 = SURFACE_SIDE_STYLE('',(#278121,#278124)); +#278121 = SURFACE_STYLE_FILL_AREA(#278122); +#278122 = FILL_AREA_STYLE('',(#278123)); +#278123 = FILL_AREA_STYLE_COLOUR('',#272831); +#278124 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278125)); +#278125 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278126 = STYLED_ITEM('color',(#278127),#210368); +#278127 = PRESENTATION_STYLE_ASSIGNMENT((#278128)); +#278128 = SURFACE_STYLE_USAGE(.BOTH.,#278129); +#278129 = SURFACE_SIDE_STYLE('',(#278130,#278133)); +#278130 = SURFACE_STYLE_FILL_AREA(#278131); +#278131 = FILL_AREA_STYLE('',(#278132)); +#278132 = FILL_AREA_STYLE_COLOUR('',#272831); +#278133 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278134)); +#278134 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278135 = STYLED_ITEM('color',(#278136),#210552); +#278136 = PRESENTATION_STYLE_ASSIGNMENT((#278137)); +#278137 = SURFACE_STYLE_USAGE(.BOTH.,#278138); +#278138 = SURFACE_SIDE_STYLE('',(#278139,#278142)); +#278139 = SURFACE_STYLE_FILL_AREA(#278140); +#278140 = FILL_AREA_STYLE('',(#278141)); +#278141 = FILL_AREA_STYLE_COLOUR('',#272831); +#278142 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278143)); +#278143 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278144 = STYLED_ITEM('color',(#278145),#210629); +#278145 = PRESENTATION_STYLE_ASSIGNMENT((#278146)); +#278146 = SURFACE_STYLE_USAGE(.BOTH.,#278147); +#278147 = SURFACE_SIDE_STYLE('',(#278148,#278151)); +#278148 = SURFACE_STYLE_FILL_AREA(#278149); +#278149 = FILL_AREA_STYLE('',(#278150)); +#278150 = FILL_AREA_STYLE_COLOUR('',#272831); +#278151 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278152)); +#278152 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278153 = STYLED_ITEM('color',(#278154),#210741); +#278154 = PRESENTATION_STYLE_ASSIGNMENT((#278155)); +#278155 = SURFACE_STYLE_USAGE(.BOTH.,#278156); +#278156 = SURFACE_SIDE_STYLE('',(#278157,#278160)); +#278157 = SURFACE_STYLE_FILL_AREA(#278158); +#278158 = FILL_AREA_STYLE('',(#278159)); +#278159 = FILL_AREA_STYLE_COLOUR('',#272831); +#278160 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278161)); +#278161 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278162 = STYLED_ITEM('color',(#278163),#210819); +#278163 = PRESENTATION_STYLE_ASSIGNMENT((#278164)); +#278164 = SURFACE_STYLE_USAGE(.BOTH.,#278165); +#278165 = SURFACE_SIDE_STYLE('',(#278166,#278169)); +#278166 = SURFACE_STYLE_FILL_AREA(#278167); +#278167 = FILL_AREA_STYLE('',(#278168)); +#278168 = FILL_AREA_STYLE_COLOUR('',#272831); +#278169 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278170)); +#278170 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278171 = STYLED_ITEM('color',(#278172),#210888); +#278172 = PRESENTATION_STYLE_ASSIGNMENT((#278173)); +#278173 = SURFACE_STYLE_USAGE(.BOTH.,#278174); +#278174 = SURFACE_SIDE_STYLE('',(#278175,#278178)); +#278175 = SURFACE_STYLE_FILL_AREA(#278176); +#278176 = FILL_AREA_STYLE('',(#278177)); +#278177 = FILL_AREA_STYLE_COLOUR('',#272831); +#278178 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278179)); +#278179 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278180 = STYLED_ITEM('color',(#278181),#211029); +#278181 = PRESENTATION_STYLE_ASSIGNMENT((#278182)); +#278182 = SURFACE_STYLE_USAGE(.BOTH.,#278183); +#278183 = SURFACE_SIDE_STYLE('',(#278184,#278187)); +#278184 = SURFACE_STYLE_FILL_AREA(#278185); +#278185 = FILL_AREA_STYLE('',(#278186)); +#278186 = FILL_AREA_STYLE_COLOUR('',#272831); +#278187 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278188)); +#278188 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278189 = STYLED_ITEM('color',(#278190),#211231); +#278190 = PRESENTATION_STYLE_ASSIGNMENT((#278191)); +#278191 = SURFACE_STYLE_USAGE(.BOTH.,#278192); +#278192 = SURFACE_SIDE_STYLE('',(#278193,#278196)); +#278193 = SURFACE_STYLE_FILL_AREA(#278194); +#278194 = FILL_AREA_STYLE('',(#278195)); +#278195 = FILL_AREA_STYLE_COLOUR('',#272831); +#278196 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278197)); +#278197 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278198 = STYLED_ITEM('color',(#278199),#211433); +#278199 = PRESENTATION_STYLE_ASSIGNMENT((#278200)); +#278200 = SURFACE_STYLE_USAGE(.BOTH.,#278201); +#278201 = SURFACE_SIDE_STYLE('',(#278202,#278205)); +#278202 = SURFACE_STYLE_FILL_AREA(#278203); +#278203 = FILL_AREA_STYLE('',(#278204)); +#278204 = FILL_AREA_STYLE_COLOUR('',#272831); +#278205 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278206)); +#278206 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278207 = STYLED_ITEM('color',(#278208),#211576); +#278208 = PRESENTATION_STYLE_ASSIGNMENT((#278209)); +#278209 = SURFACE_STYLE_USAGE(.BOTH.,#278210); +#278210 = SURFACE_SIDE_STYLE('',(#278211,#278214)); +#278211 = SURFACE_STYLE_FILL_AREA(#278212); +#278212 = FILL_AREA_STYLE('',(#278213)); +#278213 = FILL_AREA_STYLE_COLOUR('',#272831); +#278214 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278215)); +#278215 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278216 = STYLED_ITEM('color',(#278217),#211620); +#278217 = PRESENTATION_STYLE_ASSIGNMENT((#278218)); +#278218 = SURFACE_STYLE_USAGE(.BOTH.,#278219); +#278219 = SURFACE_SIDE_STYLE('',(#278220,#278223)); +#278220 = SURFACE_STYLE_FILL_AREA(#278221); +#278221 = FILL_AREA_STYLE('',(#278222)); +#278222 = FILL_AREA_STYLE_COLOUR('',#272831); +#278223 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278224)); +#278224 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278225 = STYLED_ITEM('color',(#278226),#211698); +#278226 = PRESENTATION_STYLE_ASSIGNMENT((#278227)); +#278227 = SURFACE_STYLE_USAGE(.BOTH.,#278228); +#278228 = SURFACE_SIDE_STYLE('',(#278229,#278232)); +#278229 = SURFACE_STYLE_FILL_AREA(#278230); +#278230 = FILL_AREA_STYLE('',(#278231)); +#278231 = FILL_AREA_STYLE_COLOUR('',#272831); +#278232 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278233)); +#278233 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278234 = STYLED_ITEM('color',(#278235),#211767); +#278235 = PRESENTATION_STYLE_ASSIGNMENT((#278236)); +#278236 = SURFACE_STYLE_USAGE(.BOTH.,#278237); +#278237 = SURFACE_SIDE_STYLE('',(#278238,#278241)); +#278238 = SURFACE_STYLE_FILL_AREA(#278239); +#278239 = FILL_AREA_STYLE('',(#278240)); +#278240 = FILL_AREA_STYLE_COLOUR('',#272831); +#278241 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278242)); +#278242 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278243 = STYLED_ITEM('color',(#278244),#211836); +#278244 = PRESENTATION_STYLE_ASSIGNMENT((#278245)); +#278245 = SURFACE_STYLE_USAGE(.BOTH.,#278246); +#278246 = SURFACE_SIDE_STYLE('',(#278247,#278250)); +#278247 = SURFACE_STYLE_FILL_AREA(#278248); +#278248 = FILL_AREA_STYLE('',(#278249)); +#278249 = FILL_AREA_STYLE_COLOUR('',#272831); +#278250 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278251)); +#278251 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278252 = STYLED_ITEM('color',(#278253),#211905); +#278253 = PRESENTATION_STYLE_ASSIGNMENT((#278254)); +#278254 = SURFACE_STYLE_USAGE(.BOTH.,#278255); +#278255 = SURFACE_SIDE_STYLE('',(#278256,#278259)); +#278256 = SURFACE_STYLE_FILL_AREA(#278257); +#278257 = FILL_AREA_STYLE('',(#278258)); +#278258 = FILL_AREA_STYLE_COLOUR('',#272831); +#278259 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278260)); +#278260 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278261 = STYLED_ITEM('color',(#278262),#212088); +#278262 = PRESENTATION_STYLE_ASSIGNMENT((#278263)); +#278263 = SURFACE_STYLE_USAGE(.BOTH.,#278264); +#278264 = SURFACE_SIDE_STYLE('',(#278265,#278268)); +#278265 = SURFACE_STYLE_FILL_AREA(#278266); +#278266 = FILL_AREA_STYLE('',(#278267)); +#278267 = FILL_AREA_STYLE_COLOUR('',#272831); +#278268 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278269)); +#278269 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278270 = STYLED_ITEM('color',(#278271),#212132); +#278271 = PRESENTATION_STYLE_ASSIGNMENT((#278272)); +#278272 = SURFACE_STYLE_USAGE(.BOTH.,#278273); +#278273 = SURFACE_SIDE_STYLE('',(#278274,#278277)); +#278274 = SURFACE_STYLE_FILL_AREA(#278275); +#278275 = FILL_AREA_STYLE('',(#278276)); +#278276 = FILL_AREA_STYLE_COLOUR('',#272831); +#278277 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278278)); +#278278 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278279 = STYLED_ITEM('color',(#278280),#212209); +#278280 = PRESENTATION_STYLE_ASSIGNMENT((#278281)); +#278281 = SURFACE_STYLE_USAGE(.BOTH.,#278282); +#278282 = SURFACE_SIDE_STYLE('',(#278283,#278286)); +#278283 = SURFACE_STYLE_FILL_AREA(#278284); +#278284 = FILL_AREA_STYLE('',(#278285)); +#278285 = FILL_AREA_STYLE_COLOUR('',#272831); +#278286 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278287)); +#278287 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278288 = STYLED_ITEM('color',(#278289),#212449); +#278289 = PRESENTATION_STYLE_ASSIGNMENT((#278290)); +#278290 = SURFACE_STYLE_USAGE(.BOTH.,#278291); +#278291 = SURFACE_SIDE_STYLE('',(#278292,#278295)); +#278292 = SURFACE_STYLE_FILL_AREA(#278293); +#278293 = FILL_AREA_STYLE('',(#278294)); +#278294 = FILL_AREA_STYLE_COLOUR('',#272831); +#278295 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278296)); +#278296 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278297 = STYLED_ITEM('color',(#278298),#212897); +#278298 = PRESENTATION_STYLE_ASSIGNMENT((#278299)); +#278299 = SURFACE_STYLE_USAGE(.BOTH.,#278300); +#278300 = SURFACE_SIDE_STYLE('',(#278301,#278304)); +#278301 = SURFACE_STYLE_FILL_AREA(#278302); +#278302 = FILL_AREA_STYLE('',(#278303)); +#278303 = FILL_AREA_STYLE_COLOUR('',#272831); +#278304 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278305)); +#278305 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278306 = STYLED_ITEM('color',(#278307),#212991); +#278307 = PRESENTATION_STYLE_ASSIGNMENT((#278308)); +#278308 = SURFACE_STYLE_USAGE(.BOTH.,#278309); +#278309 = SURFACE_SIDE_STYLE('',(#278310,#278313)); +#278310 = SURFACE_STYLE_FILL_AREA(#278311); +#278311 = FILL_AREA_STYLE('',(#278312)); +#278312 = FILL_AREA_STYLE_COLOUR('',#272831); +#278313 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278314)); +#278314 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278315 = STYLED_ITEM('color',(#278316),#213085); +#278316 = PRESENTATION_STYLE_ASSIGNMENT((#278317)); +#278317 = SURFACE_STYLE_USAGE(.BOTH.,#278318); +#278318 = SURFACE_SIDE_STYLE('',(#278319,#278322)); +#278319 = SURFACE_STYLE_FILL_AREA(#278320); +#278320 = FILL_AREA_STYLE('',(#278321)); +#278321 = FILL_AREA_STYLE_COLOUR('',#272831); +#278322 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278323)); +#278323 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278324 = STYLED_ITEM('color',(#278325),#213154); +#278325 = PRESENTATION_STYLE_ASSIGNMENT((#278326)); +#278326 = SURFACE_STYLE_USAGE(.BOTH.,#278327); +#278327 = SURFACE_SIDE_STYLE('',(#278328,#278331)); +#278328 = SURFACE_STYLE_FILL_AREA(#278329); +#278329 = FILL_AREA_STYLE('',(#278330)); +#278330 = FILL_AREA_STYLE_COLOUR('',#272831); +#278331 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278332)); +#278332 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278333 = STYLED_ITEM('color',(#278334),#213467); +#278334 = PRESENTATION_STYLE_ASSIGNMENT((#278335)); +#278335 = SURFACE_STYLE_USAGE(.BOTH.,#278336); +#278336 = SURFACE_SIDE_STYLE('',(#278337,#278340)); +#278337 = SURFACE_STYLE_FILL_AREA(#278338); +#278338 = FILL_AREA_STYLE('',(#278339)); +#278339 = FILL_AREA_STYLE_COLOUR('',#272831); +#278340 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278341)); +#278341 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278342 = STYLED_ITEM('color',(#278343),#213695); +#278343 = PRESENTATION_STYLE_ASSIGNMENT((#278344)); +#278344 = SURFACE_STYLE_USAGE(.BOTH.,#278345); +#278345 = SURFACE_SIDE_STYLE('',(#278346,#278349)); +#278346 = SURFACE_STYLE_FILL_AREA(#278347); +#278347 = FILL_AREA_STYLE('',(#278348)); +#278348 = FILL_AREA_STYLE_COLOUR('',#272831); +#278349 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278350)); +#278350 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278351 = STYLED_ITEM('color',(#278352),#213866); +#278352 = PRESENTATION_STYLE_ASSIGNMENT((#278353)); +#278353 = SURFACE_STYLE_USAGE(.BOTH.,#278354); +#278354 = SURFACE_SIDE_STYLE('',(#278355,#278358)); +#278355 = SURFACE_STYLE_FILL_AREA(#278356); +#278356 = FILL_AREA_STYLE('',(#278357)); +#278357 = FILL_AREA_STYLE_COLOUR('',#272831); +#278358 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278359)); +#278359 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278360 = STYLED_ITEM('color',(#278361),#213926); +#278361 = PRESENTATION_STYLE_ASSIGNMENT((#278362)); +#278362 = SURFACE_STYLE_USAGE(.BOTH.,#278363); +#278363 = SURFACE_SIDE_STYLE('',(#278364,#278367)); +#278364 = SURFACE_STYLE_FILL_AREA(#278365); +#278365 = FILL_AREA_STYLE('',(#278366)); +#278366 = FILL_AREA_STYLE_COLOUR('',#272831); +#278367 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278368)); +#278368 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278369 = STYLED_ITEM('color',(#278370),#214059); +#278370 = PRESENTATION_STYLE_ASSIGNMENT((#278371)); +#278371 = SURFACE_STYLE_USAGE(.BOTH.,#278372); +#278372 = SURFACE_SIDE_STYLE('',(#278373,#278376)); +#278373 = SURFACE_STYLE_FILL_AREA(#278374); +#278374 = FILL_AREA_STYLE('',(#278375)); +#278375 = FILL_AREA_STYLE_COLOUR('',#272831); +#278376 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278377)); +#278377 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278378 = STYLED_ITEM('color',(#278379),#214237); +#278379 = PRESENTATION_STYLE_ASSIGNMENT((#278380)); +#278380 = SURFACE_STYLE_USAGE(.BOTH.,#278381); +#278381 = SURFACE_SIDE_STYLE('',(#278382,#278385)); +#278382 = SURFACE_STYLE_FILL_AREA(#278383); +#278383 = FILL_AREA_STYLE('',(#278384)); +#278384 = FILL_AREA_STYLE_COLOUR('',#272831); +#278385 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278386)); +#278386 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278387 = STYLED_ITEM('color',(#278388),#214355); +#278388 = PRESENTATION_STYLE_ASSIGNMENT((#278389)); +#278389 = SURFACE_STYLE_USAGE(.BOTH.,#278390); +#278390 = SURFACE_SIDE_STYLE('',(#278391,#278394)); +#278391 = SURFACE_STYLE_FILL_AREA(#278392); +#278392 = FILL_AREA_STYLE('',(#278393)); +#278393 = FILL_AREA_STYLE_COLOUR('',#272831); +#278394 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278395)); +#278395 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278396 = STYLED_ITEM('color',(#278397),#214507); +#278397 = PRESENTATION_STYLE_ASSIGNMENT((#278398)); +#278398 = SURFACE_STYLE_USAGE(.BOTH.,#278399); +#278399 = SURFACE_SIDE_STYLE('',(#278400,#278403)); +#278400 = SURFACE_STYLE_FILL_AREA(#278401); +#278401 = FILL_AREA_STYLE('',(#278402)); +#278402 = FILL_AREA_STYLE_COLOUR('',#272831); +#278403 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278404)); +#278404 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278405 = STYLED_ITEM('color',(#278406),#214585); +#278406 = PRESENTATION_STYLE_ASSIGNMENT((#278407)); +#278407 = SURFACE_STYLE_USAGE(.BOTH.,#278408); +#278408 = SURFACE_SIDE_STYLE('',(#278409,#278412)); +#278409 = SURFACE_STYLE_FILL_AREA(#278410); +#278410 = FILL_AREA_STYLE('',(#278411)); +#278411 = FILL_AREA_STYLE_COLOUR('',#272831); +#278412 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278413)); +#278413 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278414 = STYLED_ITEM('color',(#278415),#214629); +#278415 = PRESENTATION_STYLE_ASSIGNMENT((#278416)); +#278416 = SURFACE_STYLE_USAGE(.BOTH.,#278417); +#278417 = SURFACE_SIDE_STYLE('',(#278418,#278421)); +#278418 = SURFACE_STYLE_FILL_AREA(#278419); +#278419 = FILL_AREA_STYLE('',(#278420)); +#278420 = FILL_AREA_STYLE_COLOUR('',#272831); +#278421 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278422)); +#278422 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278423 = STYLED_ITEM('color',(#278424),#214780); +#278424 = PRESENTATION_STYLE_ASSIGNMENT((#278425)); +#278425 = SURFACE_STYLE_USAGE(.BOTH.,#278426); +#278426 = SURFACE_SIDE_STYLE('',(#278427,#278430)); +#278427 = SURFACE_STYLE_FILL_AREA(#278428); +#278428 = FILL_AREA_STYLE('',(#278429)); +#278429 = FILL_AREA_STYLE_COLOUR('',#272831); +#278430 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278431)); +#278431 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278432 = STYLED_ITEM('color',(#278433),#214832); +#278433 = PRESENTATION_STYLE_ASSIGNMENT((#278434)); +#278434 = SURFACE_STYLE_USAGE(.BOTH.,#278435); +#278435 = SURFACE_SIDE_STYLE('',(#278436,#278439)); +#278436 = SURFACE_STYLE_FILL_AREA(#278437); +#278437 = FILL_AREA_STYLE('',(#278438)); +#278438 = FILL_AREA_STYLE_COLOUR('',#272831); +#278439 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278440)); +#278440 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278441 = STYLED_ITEM('color',(#278442),#214884); +#278442 = PRESENTATION_STYLE_ASSIGNMENT((#278443)); +#278443 = SURFACE_STYLE_USAGE(.BOTH.,#278444); +#278444 = SURFACE_SIDE_STYLE('',(#278445,#278448)); +#278445 = SURFACE_STYLE_FILL_AREA(#278446); +#278446 = FILL_AREA_STYLE('',(#278447)); +#278447 = FILL_AREA_STYLE_COLOUR('',#272831); +#278448 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278449)); +#278449 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278450 = STYLED_ITEM('color',(#278451),#215167); +#278451 = PRESENTATION_STYLE_ASSIGNMENT((#278452)); +#278452 = SURFACE_STYLE_USAGE(.BOTH.,#278453); +#278453 = SURFACE_SIDE_STYLE('',(#278454,#278457)); +#278454 = SURFACE_STYLE_FILL_AREA(#278455); +#278455 = FILL_AREA_STYLE('',(#278456)); +#278456 = FILL_AREA_STYLE_COLOUR('',#272831); +#278457 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278458)); +#278458 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278459 = STYLED_ITEM('color',(#278460),#215211); +#278460 = PRESENTATION_STYLE_ASSIGNMENT((#278461)); +#278461 = SURFACE_STYLE_USAGE(.BOTH.,#278462); +#278462 = SURFACE_SIDE_STYLE('',(#278463,#278466)); +#278463 = SURFACE_STYLE_FILL_AREA(#278464); +#278464 = FILL_AREA_STYLE('',(#278465)); +#278465 = FILL_AREA_STYLE_COLOUR('',#272831); +#278466 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278467)); +#278467 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278468 = STYLED_ITEM('color',(#278469),#215423); +#278469 = PRESENTATION_STYLE_ASSIGNMENT((#278470)); +#278470 = SURFACE_STYLE_USAGE(.BOTH.,#278471); +#278471 = SURFACE_SIDE_STYLE('',(#278472,#278475)); +#278472 = SURFACE_STYLE_FILL_AREA(#278473); +#278473 = FILL_AREA_STYLE('',(#278474)); +#278474 = FILL_AREA_STYLE_COLOUR('',#272831); +#278475 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278476)); +#278476 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278477 = STYLED_ITEM('color',(#278478),#215565); +#278478 = PRESENTATION_STYLE_ASSIGNMENT((#278479)); +#278479 = SURFACE_STYLE_USAGE(.BOTH.,#278480); +#278480 = SURFACE_SIDE_STYLE('',(#278481,#278484)); +#278481 = SURFACE_STYLE_FILL_AREA(#278482); +#278482 = FILL_AREA_STYLE('',(#278483)); +#278483 = FILL_AREA_STYLE_COLOUR('',#272831); +#278484 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278485)); +#278485 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278486 = STYLED_ITEM('color',(#278487),#215758); +#278487 = PRESENTATION_STYLE_ASSIGNMENT((#278488)); +#278488 = SURFACE_STYLE_USAGE(.BOTH.,#278489); +#278489 = SURFACE_SIDE_STYLE('',(#278490,#278493)); +#278490 = SURFACE_STYLE_FILL_AREA(#278491); +#278491 = FILL_AREA_STYLE('',(#278492)); +#278492 = FILL_AREA_STYLE_COLOUR('',#272831); +#278493 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278494)); +#278494 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278495 = STYLED_ITEM('color',(#278496),#215970); +#278496 = PRESENTATION_STYLE_ASSIGNMENT((#278497)); +#278497 = SURFACE_STYLE_USAGE(.BOTH.,#278498); +#278498 = SURFACE_SIDE_STYLE('',(#278499,#278502)); +#278499 = SURFACE_STYLE_FILL_AREA(#278500); +#278500 = FILL_AREA_STYLE('',(#278501)); +#278501 = FILL_AREA_STYLE_COLOUR('',#272831); +#278502 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278503)); +#278503 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278504 = STYLED_ITEM('color',(#278505),#216120); +#278505 = PRESENTATION_STYLE_ASSIGNMENT((#278506)); +#278506 = SURFACE_STYLE_USAGE(.BOTH.,#278507); +#278507 = SURFACE_SIDE_STYLE('',(#278508,#278511)); +#278508 = SURFACE_STYLE_FILL_AREA(#278509); +#278509 = FILL_AREA_STYLE('',(#278510)); +#278510 = FILL_AREA_STYLE_COLOUR('',#272831); +#278511 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278512)); +#278512 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278513 = STYLED_ITEM('color',(#278514),#216187); +#278514 = PRESENTATION_STYLE_ASSIGNMENT((#278515)); +#278515 = SURFACE_STYLE_USAGE(.BOTH.,#278516); +#278516 = SURFACE_SIDE_STYLE('',(#278517,#278520)); +#278517 = SURFACE_STYLE_FILL_AREA(#278518); +#278518 = FILL_AREA_STYLE('',(#278519)); +#278519 = FILL_AREA_STYLE_COLOUR('',#272831); +#278520 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278521)); +#278521 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278522 = STYLED_ITEM('color',(#278523),#216457); +#278523 = PRESENTATION_STYLE_ASSIGNMENT((#278524)); +#278524 = SURFACE_STYLE_USAGE(.BOTH.,#278525); +#278525 = SURFACE_SIDE_STYLE('',(#278526,#278529)); +#278526 = SURFACE_STYLE_FILL_AREA(#278527); +#278527 = FILL_AREA_STYLE('',(#278528)); +#278528 = FILL_AREA_STYLE_COLOUR('',#272831); +#278529 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278530)); +#278530 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278531 = STYLED_ITEM('color',(#278532),#216569); +#278532 = PRESENTATION_STYLE_ASSIGNMENT((#278533)); +#278533 = SURFACE_STYLE_USAGE(.BOTH.,#278534); +#278534 = SURFACE_SIDE_STYLE('',(#278535,#278538)); +#278535 = SURFACE_STYLE_FILL_AREA(#278536); +#278536 = FILL_AREA_STYLE('',(#278537)); +#278537 = FILL_AREA_STYLE_COLOUR('',#272831); +#278538 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278539)); +#278539 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278540 = STYLED_ITEM('color',(#278541),#216753); +#278541 = PRESENTATION_STYLE_ASSIGNMENT((#278542)); +#278542 = SURFACE_STYLE_USAGE(.BOTH.,#278543); +#278543 = SURFACE_SIDE_STYLE('',(#278544,#278547)); +#278544 = SURFACE_STYLE_FILL_AREA(#278545); +#278545 = FILL_AREA_STYLE('',(#278546)); +#278546 = FILL_AREA_STYLE_COLOUR('',#272831); +#278547 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278548)); +#278548 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278549 = STYLED_ITEM('color',(#278550),#217111); +#278550 = PRESENTATION_STYLE_ASSIGNMENT((#278551)); +#278551 = SURFACE_STYLE_USAGE(.BOTH.,#278552); +#278552 = SURFACE_SIDE_STYLE('',(#278553,#278556)); +#278553 = SURFACE_STYLE_FILL_AREA(#278554); +#278554 = FILL_AREA_STYLE('',(#278555)); +#278555 = FILL_AREA_STYLE_COLOUR('',#272831); +#278556 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278557)); +#278557 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278558 = STYLED_ITEM('color',(#278559),#217383); +#278559 = PRESENTATION_STYLE_ASSIGNMENT((#278560)); +#278560 = SURFACE_STYLE_USAGE(.BOTH.,#278561); +#278561 = SURFACE_SIDE_STYLE('',(#278562,#278565)); +#278562 = SURFACE_STYLE_FILL_AREA(#278563); +#278563 = FILL_AREA_STYLE('',(#278564)); +#278564 = FILL_AREA_STYLE_COLOUR('',#272831); +#278565 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278566)); +#278566 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278567 = STYLED_ITEM('color',(#278568),#217706); +#278568 = PRESENTATION_STYLE_ASSIGNMENT((#278569)); +#278569 = SURFACE_STYLE_USAGE(.BOTH.,#278570); +#278570 = SURFACE_SIDE_STYLE('',(#278571,#278574)); +#278571 = SURFACE_STYLE_FILL_AREA(#278572); +#278572 = FILL_AREA_STYLE('',(#278573)); +#278573 = FILL_AREA_STYLE_COLOUR('',#272831); +#278574 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278575)); +#278575 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278576 = STYLED_ITEM('color',(#278577),#217832); +#278577 = PRESENTATION_STYLE_ASSIGNMENT((#278578)); +#278578 = SURFACE_STYLE_USAGE(.BOTH.,#278579); +#278579 = SURFACE_SIDE_STYLE('',(#278580,#278583)); +#278580 = SURFACE_STYLE_FILL_AREA(#278581); +#278581 = FILL_AREA_STYLE('',(#278582)); +#278582 = FILL_AREA_STYLE_COLOUR('',#272831); +#278583 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278584)); +#278584 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278585 = STYLED_ITEM('color',(#278586),#217967); +#278586 = PRESENTATION_STYLE_ASSIGNMENT((#278587)); +#278587 = SURFACE_STYLE_USAGE(.BOTH.,#278588); +#278588 = SURFACE_SIDE_STYLE('',(#278589,#278592)); +#278589 = SURFACE_STYLE_FILL_AREA(#278590); +#278590 = FILL_AREA_STYLE('',(#278591)); +#278591 = FILL_AREA_STYLE_COLOUR('',#272831); +#278592 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278593)); +#278593 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278594 = STYLED_ITEM('color',(#278595),#218222); +#278595 = PRESENTATION_STYLE_ASSIGNMENT((#278596)); +#278596 = SURFACE_STYLE_USAGE(.BOTH.,#278597); +#278597 = SURFACE_SIDE_STYLE('',(#278598,#278601)); +#278598 = SURFACE_STYLE_FILL_AREA(#278599); +#278599 = FILL_AREA_STYLE('',(#278600)); +#278600 = FILL_AREA_STYLE_COLOUR('',#272831); +#278601 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278602)); +#278602 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278603 = STYLED_ITEM('color',(#278604),#218299); +#278604 = PRESENTATION_STYLE_ASSIGNMENT((#278605)); +#278605 = SURFACE_STYLE_USAGE(.BOTH.,#278606); +#278606 = SURFACE_SIDE_STYLE('',(#278607,#278610)); +#278607 = SURFACE_STYLE_FILL_AREA(#278608); +#278608 = FILL_AREA_STYLE('',(#278609)); +#278609 = FILL_AREA_STYLE_COLOUR('',#272831); +#278610 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278611)); +#278611 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278612 = STYLED_ITEM('color',(#278613),#218450); +#278613 = PRESENTATION_STYLE_ASSIGNMENT((#278614)); +#278614 = SURFACE_STYLE_USAGE(.BOTH.,#278615); +#278615 = SURFACE_SIDE_STYLE('',(#278616,#278619)); +#278616 = SURFACE_STYLE_FILL_AREA(#278617); +#278617 = FILL_AREA_STYLE('',(#278618)); +#278618 = FILL_AREA_STYLE_COLOUR('',#272831); +#278619 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278620)); +#278620 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278621 = STYLED_ITEM('color',(#278622),#218664); +#278622 = PRESENTATION_STYLE_ASSIGNMENT((#278623)); +#278623 = SURFACE_STYLE_USAGE(.BOTH.,#278624); +#278624 = SURFACE_SIDE_STYLE('',(#278625,#278628)); +#278625 = SURFACE_STYLE_FILL_AREA(#278626); +#278626 = FILL_AREA_STYLE('',(#278627)); +#278627 = FILL_AREA_STYLE_COLOUR('',#272831); +#278628 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278629)); +#278629 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278630 = STYLED_ITEM('color',(#278631),#218766); +#278631 = PRESENTATION_STYLE_ASSIGNMENT((#278632)); +#278632 = SURFACE_STYLE_USAGE(.BOTH.,#278633); +#278633 = SURFACE_SIDE_STYLE('',(#278634,#278637)); +#278634 = SURFACE_STYLE_FILL_AREA(#278635); +#278635 = FILL_AREA_STYLE('',(#278636)); +#278636 = FILL_AREA_STYLE_COLOUR('',#272831); +#278637 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278638)); +#278638 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278639 = STYLED_ITEM('color',(#278640),#218909); +#278640 = PRESENTATION_STYLE_ASSIGNMENT((#278641)); +#278641 = SURFACE_STYLE_USAGE(.BOTH.,#278642); +#278642 = SURFACE_SIDE_STYLE('',(#278643,#278646)); +#278643 = SURFACE_STYLE_FILL_AREA(#278644); +#278644 = FILL_AREA_STYLE('',(#278645)); +#278645 = FILL_AREA_STYLE_COLOUR('',#272831); +#278646 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278647)); +#278647 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278648 = STYLED_ITEM('color',(#278649),#219067); +#278649 = PRESENTATION_STYLE_ASSIGNMENT((#278650)); +#278650 = SURFACE_STYLE_USAGE(.BOTH.,#278651); +#278651 = SURFACE_SIDE_STYLE('',(#278652,#278655)); +#278652 = SURFACE_STYLE_FILL_AREA(#278653); +#278653 = FILL_AREA_STYLE('',(#278654)); +#278654 = FILL_AREA_STYLE_COLOUR('',#272831); +#278655 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278656)); +#278656 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278657 = STYLED_ITEM('color',(#278658),#219225); +#278658 = PRESENTATION_STYLE_ASSIGNMENT((#278659)); +#278659 = SURFACE_STYLE_USAGE(.BOTH.,#278660); +#278660 = SURFACE_SIDE_STYLE('',(#278661,#278664)); +#278661 = SURFACE_STYLE_FILL_AREA(#278662); +#278662 = FILL_AREA_STYLE('',(#278663)); +#278663 = FILL_AREA_STYLE_COLOUR('',#272831); +#278664 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278665)); +#278665 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278666 = STYLED_ITEM('color',(#278667),#219310); +#278667 = PRESENTATION_STYLE_ASSIGNMENT((#278668)); +#278668 = SURFACE_STYLE_USAGE(.BOTH.,#278669); +#278669 = SURFACE_SIDE_STYLE('',(#278670,#278673)); +#278670 = SURFACE_STYLE_FILL_AREA(#278671); +#278671 = FILL_AREA_STYLE('',(#278672)); +#278672 = FILL_AREA_STYLE_COLOUR('',#272831); +#278673 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278674)); +#278674 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278675 = STYLED_ITEM('color',(#278676),#219510); +#278676 = PRESENTATION_STYLE_ASSIGNMENT((#278677)); +#278677 = SURFACE_STYLE_USAGE(.BOTH.,#278678); +#278678 = SURFACE_SIDE_STYLE('',(#278679,#278682)); +#278679 = SURFACE_STYLE_FILL_AREA(#278680); +#278680 = FILL_AREA_STYLE('',(#278681)); +#278681 = FILL_AREA_STYLE_COLOUR('',#272831); +#278682 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278683)); +#278683 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278684 = STYLED_ITEM('color',(#278685),#219570); +#278685 = PRESENTATION_STYLE_ASSIGNMENT((#278686)); +#278686 = SURFACE_STYLE_USAGE(.BOTH.,#278687); +#278687 = SURFACE_SIDE_STYLE('',(#278688,#278691)); +#278688 = SURFACE_STYLE_FILL_AREA(#278689); +#278689 = FILL_AREA_STYLE('',(#278690)); +#278690 = FILL_AREA_STYLE_COLOUR('',#272831); +#278691 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278692)); +#278692 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278693 = STYLED_ITEM('color',(#278694),#219655); +#278694 = PRESENTATION_STYLE_ASSIGNMENT((#278695)); +#278695 = SURFACE_STYLE_USAGE(.BOTH.,#278696); +#278696 = SURFACE_SIDE_STYLE('',(#278697,#278700)); +#278697 = SURFACE_STYLE_FILL_AREA(#278698); +#278698 = FILL_AREA_STYLE('',(#278699)); +#278699 = FILL_AREA_STYLE_COLOUR('',#272831); +#278700 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278701)); +#278701 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278702 = STYLED_ITEM('color',(#278703),#219740); +#278703 = PRESENTATION_STYLE_ASSIGNMENT((#278704)); +#278704 = SURFACE_STYLE_USAGE(.BOTH.,#278705); +#278705 = SURFACE_SIDE_STYLE('',(#278706,#278709)); +#278706 = SURFACE_STYLE_FILL_AREA(#278707); +#278707 = FILL_AREA_STYLE('',(#278708)); +#278708 = FILL_AREA_STYLE_COLOUR('',#272831); +#278709 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278710)); +#278710 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278711 = STYLED_ITEM('color',(#278712),#219948); +#278712 = PRESENTATION_STYLE_ASSIGNMENT((#278713)); +#278713 = SURFACE_STYLE_USAGE(.BOTH.,#278714); +#278714 = SURFACE_SIDE_STYLE('',(#278715,#278718)); +#278715 = SURFACE_STYLE_FILL_AREA(#278716); +#278716 = FILL_AREA_STYLE('',(#278717)); +#278717 = FILL_AREA_STYLE_COLOUR('',#272831); +#278718 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278719)); +#278719 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278720 = STYLED_ITEM('color',(#278721),#219992); +#278721 = PRESENTATION_STYLE_ASSIGNMENT((#278722)); +#278722 = SURFACE_STYLE_USAGE(.BOTH.,#278723); +#278723 = SURFACE_SIDE_STYLE('',(#278724,#278727)); +#278724 = SURFACE_STYLE_FILL_AREA(#278725); +#278725 = FILL_AREA_STYLE('',(#278726)); +#278726 = FILL_AREA_STYLE_COLOUR('',#272831); +#278727 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278728)); +#278728 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278729 = STYLED_ITEM('color',(#278730),#220102); +#278730 = PRESENTATION_STYLE_ASSIGNMENT((#278731)); +#278731 = SURFACE_STYLE_USAGE(.BOTH.,#278732); +#278732 = SURFACE_SIDE_STYLE('',(#278733,#278736)); +#278733 = SURFACE_STYLE_FILL_AREA(#278734); +#278734 = FILL_AREA_STYLE('',(#278735)); +#278735 = FILL_AREA_STYLE_COLOUR('',#272831); +#278736 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278737)); +#278737 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278738 = STYLED_ITEM('color',(#278739),#220204); +#278739 = PRESENTATION_STYLE_ASSIGNMENT((#278740)); +#278740 = SURFACE_STYLE_USAGE(.BOTH.,#278741); +#278741 = SURFACE_SIDE_STYLE('',(#278742,#278745)); +#278742 = SURFACE_STYLE_FILL_AREA(#278743); +#278743 = FILL_AREA_STYLE('',(#278744)); +#278744 = FILL_AREA_STYLE_COLOUR('',#272831); +#278745 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278746)); +#278746 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278747 = STYLED_ITEM('color',(#278748),#220281); +#278748 = PRESENTATION_STYLE_ASSIGNMENT((#278749)); +#278749 = SURFACE_STYLE_USAGE(.BOTH.,#278750); +#278750 = SURFACE_SIDE_STYLE('',(#278751,#278754)); +#278751 = SURFACE_STYLE_FILL_AREA(#278752); +#278752 = FILL_AREA_STYLE('',(#278753)); +#278753 = FILL_AREA_STYLE_COLOUR('',#272831); +#278754 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278755)); +#278755 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278756 = STYLED_ITEM('color',(#278757),#220729); +#278757 = PRESENTATION_STYLE_ASSIGNMENT((#278758)); +#278758 = SURFACE_STYLE_USAGE(.BOTH.,#278759); +#278759 = SURFACE_SIDE_STYLE('',(#278760,#278763)); +#278760 = SURFACE_STYLE_FILL_AREA(#278761); +#278761 = FILL_AREA_STYLE('',(#278762)); +#278762 = FILL_AREA_STYLE_COLOUR('',#272831); +#278763 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278764)); +#278764 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278765 = STYLED_ITEM('color',(#278766),#220773); +#278766 = PRESENTATION_STYLE_ASSIGNMENT((#278767)); +#278767 = SURFACE_STYLE_USAGE(.BOTH.,#278768); +#278768 = SURFACE_SIDE_STYLE('',(#278769,#278772)); +#278769 = SURFACE_STYLE_FILL_AREA(#278770); +#278770 = FILL_AREA_STYLE('',(#278771)); +#278771 = FILL_AREA_STYLE_COLOUR('',#272831); +#278772 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278773)); +#278773 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278774 = STYLED_ITEM('color',(#278775),#220980); +#278775 = PRESENTATION_STYLE_ASSIGNMENT((#278776)); +#278776 = SURFACE_STYLE_USAGE(.BOTH.,#278777); +#278777 = SURFACE_SIDE_STYLE('',(#278778,#278781)); +#278778 = SURFACE_STYLE_FILL_AREA(#278779); +#278779 = FILL_AREA_STYLE('',(#278780)); +#278780 = FILL_AREA_STYLE_COLOUR('',#272831); +#278781 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278782)); +#278782 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278783 = STYLED_ITEM('color',(#278784),#221201); +#278784 = PRESENTATION_STYLE_ASSIGNMENT((#278785)); +#278785 = SURFACE_STYLE_USAGE(.BOTH.,#278786); +#278786 = SURFACE_SIDE_STYLE('',(#278787,#278790)); +#278787 = SURFACE_STYLE_FILL_AREA(#278788); +#278788 = FILL_AREA_STYLE('',(#278789)); +#278789 = FILL_AREA_STYLE_COLOUR('',#272831); +#278790 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278791)); +#278791 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278792 = STYLED_ITEM('color',(#278793),#221295); +#278793 = PRESENTATION_STYLE_ASSIGNMENT((#278794)); +#278794 = SURFACE_STYLE_USAGE(.BOTH.,#278795); +#278795 = SURFACE_SIDE_STYLE('',(#278796,#278799)); +#278796 = SURFACE_STYLE_FILL_AREA(#278797); +#278797 = FILL_AREA_STYLE('',(#278798)); +#278798 = FILL_AREA_STYLE_COLOUR('',#272831); +#278799 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278800)); +#278800 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278801 = STYLED_ITEM('color',(#278802),#221625); +#278802 = PRESENTATION_STYLE_ASSIGNMENT((#278803)); +#278803 = SURFACE_STYLE_USAGE(.BOTH.,#278804); +#278804 = SURFACE_SIDE_STYLE('',(#278805,#278808)); +#278805 = SURFACE_STYLE_FILL_AREA(#278806); +#278806 = FILL_AREA_STYLE('',(#278807)); +#278807 = FILL_AREA_STYLE_COLOUR('',#272831); +#278808 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278809)); +#278809 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278810 = STYLED_ITEM('color',(#278811),#221767); +#278811 = PRESENTATION_STYLE_ASSIGNMENT((#278812)); +#278812 = SURFACE_STYLE_USAGE(.BOTH.,#278813); +#278813 = SURFACE_SIDE_STYLE('',(#278814,#278817)); +#278814 = SURFACE_STYLE_FILL_AREA(#278815); +#278815 = FILL_AREA_STYLE('',(#278816)); +#278816 = FILL_AREA_STYLE_COLOUR('',#272831); +#278817 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278818)); +#278818 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278819 = STYLED_ITEM('color',(#278820),#221938); +#278820 = PRESENTATION_STYLE_ASSIGNMENT((#278821)); +#278821 = SURFACE_STYLE_USAGE(.BOTH.,#278822); +#278822 = SURFACE_SIDE_STYLE('',(#278823,#278826)); +#278823 = SURFACE_STYLE_FILL_AREA(#278824); +#278824 = FILL_AREA_STYLE('',(#278825)); +#278825 = FILL_AREA_STYLE_COLOUR('',#272831); +#278826 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278827)); +#278827 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278828 = STYLED_ITEM('color',(#278829),#222081); +#278829 = PRESENTATION_STYLE_ASSIGNMENT((#278830)); +#278830 = SURFACE_STYLE_USAGE(.BOTH.,#278831); +#278831 = SURFACE_SIDE_STYLE('',(#278832,#278835)); +#278832 = SURFACE_STYLE_FILL_AREA(#278833); +#278833 = FILL_AREA_STYLE('',(#278834)); +#278834 = FILL_AREA_STYLE_COLOUR('',#272831); +#278835 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278836)); +#278836 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278837 = STYLED_ITEM('color',(#278838),#222223); +#278838 = PRESENTATION_STYLE_ASSIGNMENT((#278839)); +#278839 = SURFACE_STYLE_USAGE(.BOTH.,#278840); +#278840 = SURFACE_SIDE_STYLE('',(#278841,#278844)); +#278841 = SURFACE_STYLE_FILL_AREA(#278842); +#278842 = FILL_AREA_STYLE('',(#278843)); +#278843 = FILL_AREA_STYLE_COLOUR('',#272831); +#278844 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278845)); +#278845 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278846 = STYLED_ITEM('color',(#278847),#222275); +#278847 = PRESENTATION_STYLE_ASSIGNMENT((#278848)); +#278848 = SURFACE_STYLE_USAGE(.BOTH.,#278849); +#278849 = SURFACE_SIDE_STYLE('',(#278850,#278853)); +#278850 = SURFACE_STYLE_FILL_AREA(#278851); +#278851 = FILL_AREA_STYLE('',(#278852)); +#278852 = FILL_AREA_STYLE_COLOUR('',#272831); +#278853 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278854)); +#278854 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278855 = STYLED_ITEM('color',(#278856),#222605); +#278856 = PRESENTATION_STYLE_ASSIGNMENT((#278857)); +#278857 = SURFACE_STYLE_USAGE(.BOTH.,#278858); +#278858 = SURFACE_SIDE_STYLE('',(#278859,#278862)); +#278859 = SURFACE_STYLE_FILL_AREA(#278860); +#278860 = FILL_AREA_STYLE('',(#278861)); +#278861 = FILL_AREA_STYLE_COLOUR('',#272831); +#278862 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278863)); +#278863 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278864 = STYLED_ITEM('color',(#278865),#222673); +#278865 = PRESENTATION_STYLE_ASSIGNMENT((#278866)); +#278866 = SURFACE_STYLE_USAGE(.BOTH.,#278867); +#278867 = SURFACE_SIDE_STYLE('',(#278868,#278871)); +#278868 = SURFACE_STYLE_FILL_AREA(#278869); +#278869 = FILL_AREA_STYLE('',(#278870)); +#278870 = FILL_AREA_STYLE_COLOUR('',#272831); +#278871 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278872)); +#278872 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278873 = STYLED_ITEM('color',(#278874),#222876); +#278874 = PRESENTATION_STYLE_ASSIGNMENT((#278875)); +#278875 = SURFACE_STYLE_USAGE(.BOTH.,#278876); +#278876 = SURFACE_SIDE_STYLE('',(#278877,#278880)); +#278877 = SURFACE_STYLE_FILL_AREA(#278878); +#278878 = FILL_AREA_STYLE('',(#278879)); +#278879 = FILL_AREA_STYLE_COLOUR('',#272831); +#278880 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278881)); +#278881 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278882 = STYLED_ITEM('color',(#278883),#222978); +#278883 = PRESENTATION_STYLE_ASSIGNMENT((#278884)); +#278884 = SURFACE_STYLE_USAGE(.BOTH.,#278885); +#278885 = SURFACE_SIDE_STYLE('',(#278886,#278889)); +#278886 = SURFACE_STYLE_FILL_AREA(#278887); +#278887 = FILL_AREA_STYLE('',(#278888)); +#278888 = FILL_AREA_STYLE_COLOUR('',#272831); +#278889 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278890)); +#278890 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278891 = STYLED_ITEM('color',(#278892),#223072); +#278892 = PRESENTATION_STYLE_ASSIGNMENT((#278893)); +#278893 = SURFACE_STYLE_USAGE(.BOTH.,#278894); +#278894 = SURFACE_SIDE_STYLE('',(#278895,#278898)); +#278895 = SURFACE_STYLE_FILL_AREA(#278896); +#278896 = FILL_AREA_STYLE('',(#278897)); +#278897 = FILL_AREA_STYLE_COLOUR('',#272831); +#278898 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278899)); +#278899 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278900 = STYLED_ITEM('color',(#278901),#223166); +#278901 = PRESENTATION_STYLE_ASSIGNMENT((#278902)); +#278902 = SURFACE_STYLE_USAGE(.BOTH.,#278903); +#278903 = SURFACE_SIDE_STYLE('',(#278904,#278907)); +#278904 = SURFACE_STYLE_FILL_AREA(#278905); +#278905 = FILL_AREA_STYLE('',(#278906)); +#278906 = FILL_AREA_STYLE_COLOUR('',#272831); +#278907 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278908)); +#278908 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278909 = STYLED_ITEM('color',(#278910),#223268); +#278910 = PRESENTATION_STYLE_ASSIGNMENT((#278911)); +#278911 = SURFACE_STYLE_USAGE(.BOTH.,#278912); +#278912 = SURFACE_SIDE_STYLE('',(#278913,#278916)); +#278913 = SURFACE_STYLE_FILL_AREA(#278914); +#278914 = FILL_AREA_STYLE('',(#278915)); +#278915 = FILL_AREA_STYLE_COLOUR('',#272831); +#278916 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278917)); +#278917 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278918 = STYLED_ITEM('color',(#278919),#223312); +#278919 = PRESENTATION_STYLE_ASSIGNMENT((#278920)); +#278920 = SURFACE_STYLE_USAGE(.BOTH.,#278921); +#278921 = SURFACE_SIDE_STYLE('',(#278922,#278925)); +#278922 = SURFACE_STYLE_FILL_AREA(#278923); +#278923 = FILL_AREA_STYLE('',(#278924)); +#278924 = FILL_AREA_STYLE_COLOUR('',#272831); +#278925 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278926)); +#278926 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278927 = STYLED_ITEM('color',(#278928),#223414); +#278928 = PRESENTATION_STYLE_ASSIGNMENT((#278929)); +#278929 = SURFACE_STYLE_USAGE(.BOTH.,#278930); +#278930 = SURFACE_SIDE_STYLE('',(#278931,#278934)); +#278931 = SURFACE_STYLE_FILL_AREA(#278932); +#278932 = FILL_AREA_STYLE('',(#278933)); +#278933 = FILL_AREA_STYLE_COLOUR('',#272831); +#278934 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278935)); +#278935 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278936 = STYLED_ITEM('color',(#278937),#223466); +#278937 = PRESENTATION_STYLE_ASSIGNMENT((#278938)); +#278938 = SURFACE_STYLE_USAGE(.BOTH.,#278939); +#278939 = SURFACE_SIDE_STYLE('',(#278940,#278943)); +#278940 = SURFACE_STYLE_FILL_AREA(#278941); +#278941 = FILL_AREA_STYLE('',(#278942)); +#278942 = FILL_AREA_STYLE_COLOUR('',#272831); +#278943 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278944)); +#278944 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278945 = STYLED_ITEM('color',(#278946),#223796); +#278946 = PRESENTATION_STYLE_ASSIGNMENT((#278947)); +#278947 = SURFACE_STYLE_USAGE(.BOTH.,#278948); +#278948 = SURFACE_SIDE_STYLE('',(#278949,#278952)); +#278949 = SURFACE_STYLE_FILL_AREA(#278950); +#278950 = FILL_AREA_STYLE('',(#278951)); +#278951 = FILL_AREA_STYLE_COLOUR('',#272831); +#278952 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278953)); +#278953 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278954 = STYLED_ITEM('color',(#278955),#224017); +#278955 = PRESENTATION_STYLE_ASSIGNMENT((#278956)); +#278956 = SURFACE_STYLE_USAGE(.BOTH.,#278957); +#278957 = SURFACE_SIDE_STYLE('',(#278958,#278961)); +#278958 = SURFACE_STYLE_FILL_AREA(#278959); +#278959 = FILL_AREA_STYLE('',(#278960)); +#278960 = FILL_AREA_STYLE_COLOUR('',#272831); +#278961 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278962)); +#278962 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278963 = STYLED_ITEM('color',(#278964),#224069); +#278964 = PRESENTATION_STYLE_ASSIGNMENT((#278965)); +#278965 = SURFACE_STYLE_USAGE(.BOTH.,#278966); +#278966 = SURFACE_SIDE_STYLE('',(#278967,#278970)); +#278967 = SURFACE_STYLE_FILL_AREA(#278968); +#278968 = FILL_AREA_STYLE('',(#278969)); +#278969 = FILL_AREA_STYLE_COLOUR('',#272831); +#278970 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278971)); +#278971 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278972 = STYLED_ITEM('color',(#278973),#224137); +#278973 = PRESENTATION_STYLE_ASSIGNMENT((#278974)); +#278974 = SURFACE_STYLE_USAGE(.BOTH.,#278975); +#278975 = SURFACE_SIDE_STYLE('',(#278976,#278979)); +#278976 = SURFACE_STYLE_FILL_AREA(#278977); +#278977 = FILL_AREA_STYLE('',(#278978)); +#278978 = FILL_AREA_STYLE_COLOUR('',#272831); +#278979 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278980)); +#278980 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278981 = STYLED_ITEM('color',(#278982),#224205); +#278982 = PRESENTATION_STYLE_ASSIGNMENT((#278983)); +#278983 = SURFACE_STYLE_USAGE(.BOTH.,#278984); +#278984 = SURFACE_SIDE_STYLE('',(#278985,#278988)); +#278985 = SURFACE_STYLE_FILL_AREA(#278986); +#278986 = FILL_AREA_STYLE('',(#278987)); +#278987 = FILL_AREA_STYLE_COLOUR('',#272831); +#278988 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278989)); +#278989 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278990 = STYLED_ITEM('color',(#278991),#224249); +#278991 = PRESENTATION_STYLE_ASSIGNMENT((#278992)); +#278992 = SURFACE_STYLE_USAGE(.BOTH.,#278993); +#278993 = SURFACE_SIDE_STYLE('',(#278994,#278997)); +#278994 = SURFACE_STYLE_FILL_AREA(#278995); +#278995 = FILL_AREA_STYLE('',(#278996)); +#278996 = FILL_AREA_STYLE_COLOUR('',#272831); +#278997 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#278998)); +#278998 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#278999 = STYLED_ITEM('color',(#279000),#224343); +#279000 = PRESENTATION_STYLE_ASSIGNMENT((#279001)); +#279001 = SURFACE_STYLE_USAGE(.BOTH.,#279002); +#279002 = SURFACE_SIDE_STYLE('',(#279003,#279006)); +#279003 = SURFACE_STYLE_FILL_AREA(#279004); +#279004 = FILL_AREA_STYLE('',(#279005)); +#279005 = FILL_AREA_STYLE_COLOUR('',#272831); +#279006 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279007)); +#279007 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279008 = STYLED_ITEM('color',(#279009),#224521); +#279009 = PRESENTATION_STYLE_ASSIGNMENT((#279010)); +#279010 = SURFACE_STYLE_USAGE(.BOTH.,#279011); +#279011 = SURFACE_SIDE_STYLE('',(#279012,#279015)); +#279012 = SURFACE_STYLE_FILL_AREA(#279013); +#279013 = FILL_AREA_STYLE('',(#279014)); +#279014 = FILL_AREA_STYLE_COLOUR('',#272831); +#279015 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279016)); +#279016 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279017 = STYLED_ITEM('color',(#279018),#224573); +#279018 = PRESENTATION_STYLE_ASSIGNMENT((#279019)); +#279019 = SURFACE_STYLE_USAGE(.BOTH.,#279020); +#279020 = SURFACE_SIDE_STYLE('',(#279021,#279024)); +#279021 = SURFACE_STYLE_FILL_AREA(#279022); +#279022 = FILL_AREA_STYLE('',(#279023)); +#279023 = FILL_AREA_STYLE_COLOUR('',#272831); +#279024 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279025)); +#279025 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279026 = STYLED_ITEM('color',(#279027),#224744); +#279027 = PRESENTATION_STYLE_ASSIGNMENT((#279028)); +#279028 = SURFACE_STYLE_USAGE(.BOTH.,#279029); +#279029 = SURFACE_SIDE_STYLE('',(#279030,#279033)); +#279030 = SURFACE_STYLE_FILL_AREA(#279031); +#279031 = FILL_AREA_STYLE('',(#279032)); +#279032 = FILL_AREA_STYLE_COLOUR('',#272831); +#279033 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279034)); +#279034 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279035 = STYLED_ITEM('color',(#279036),#224854); +#279036 = PRESENTATION_STYLE_ASSIGNMENT((#279037)); +#279037 = SURFACE_STYLE_USAGE(.BOTH.,#279038); +#279038 = SURFACE_SIDE_STYLE('',(#279039,#279042)); +#279039 = SURFACE_STYLE_FILL_AREA(#279040); +#279040 = FILL_AREA_STYLE('',(#279041)); +#279041 = FILL_AREA_STYLE_COLOUR('',#272831); +#279042 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279043)); +#279043 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279044 = STYLED_ITEM('color',(#279045),#225103); +#279045 = PRESENTATION_STYLE_ASSIGNMENT((#279046)); +#279046 = SURFACE_STYLE_USAGE(.BOTH.,#279047); +#279047 = SURFACE_SIDE_STYLE('',(#279048,#279051)); +#279048 = SURFACE_STYLE_FILL_AREA(#279049); +#279049 = FILL_AREA_STYLE('',(#279050)); +#279050 = FILL_AREA_STYLE_COLOUR('',#272831); +#279051 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279052)); +#279052 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279053 = STYLED_ITEM('color',(#279054),#225197); +#279054 = PRESENTATION_STYLE_ASSIGNMENT((#279055)); +#279055 = SURFACE_STYLE_USAGE(.BOTH.,#279056); +#279056 = SURFACE_SIDE_STYLE('',(#279057,#279060)); +#279057 = SURFACE_STYLE_FILL_AREA(#279058); +#279058 = FILL_AREA_STYLE('',(#279059)); +#279059 = FILL_AREA_STYLE_COLOUR('',#272831); +#279060 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279061)); +#279061 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279062 = STYLED_ITEM('color',(#279063),#225265); +#279063 = PRESENTATION_STYLE_ASSIGNMENT((#279064)); +#279064 = SURFACE_STYLE_USAGE(.BOTH.,#279065); +#279065 = SURFACE_SIDE_STYLE('',(#279066,#279069)); +#279066 = SURFACE_STYLE_FILL_AREA(#279067); +#279067 = FILL_AREA_STYLE('',(#279068)); +#279068 = FILL_AREA_STYLE_COLOUR('',#272831); +#279069 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279070)); +#279070 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279071 = STYLED_ITEM('color',(#279072),#225309); +#279072 = PRESENTATION_STYLE_ASSIGNMENT((#279073)); +#279073 = SURFACE_STYLE_USAGE(.BOTH.,#279074); +#279074 = SURFACE_SIDE_STYLE('',(#279075,#279078)); +#279075 = SURFACE_STYLE_FILL_AREA(#279076); +#279076 = FILL_AREA_STYLE('',(#279077)); +#279077 = FILL_AREA_STYLE_COLOUR('',#272831); +#279078 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279079)); +#279079 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279080 = STYLED_ITEM('color',(#279081),#225353); +#279081 = PRESENTATION_STYLE_ASSIGNMENT((#279082)); +#279082 = SURFACE_STYLE_USAGE(.BOTH.,#279083); +#279083 = SURFACE_SIDE_STYLE('',(#279084,#279087)); +#279084 = SURFACE_STYLE_FILL_AREA(#279085); +#279085 = FILL_AREA_STYLE('',(#279086)); +#279086 = FILL_AREA_STYLE_COLOUR('',#272831); +#279087 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279088)); +#279088 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279089 = STYLED_ITEM('color',(#279090),#225397); +#279090 = PRESENTATION_STYLE_ASSIGNMENT((#279091)); +#279091 = SURFACE_STYLE_USAGE(.BOTH.,#279092); +#279092 = SURFACE_SIDE_STYLE('',(#279093,#279096)); +#279093 = SURFACE_STYLE_FILL_AREA(#279094); +#279094 = FILL_AREA_STYLE('',(#279095)); +#279095 = FILL_AREA_STYLE_COLOUR('',#272831); +#279096 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279097)); +#279097 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279098 = STYLED_ITEM('color',(#279099),#225441); +#279099 = PRESENTATION_STYLE_ASSIGNMENT((#279100)); +#279100 = SURFACE_STYLE_USAGE(.BOTH.,#279101); +#279101 = SURFACE_SIDE_STYLE('',(#279102,#279105)); +#279102 = SURFACE_STYLE_FILL_AREA(#279103); +#279103 = FILL_AREA_STYLE('',(#279104)); +#279104 = FILL_AREA_STYLE_COLOUR('',#272831); +#279105 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279106)); +#279106 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279107 = STYLED_ITEM('color',(#279108),#225535); +#279108 = PRESENTATION_STYLE_ASSIGNMENT((#279109)); +#279109 = SURFACE_STYLE_USAGE(.BOTH.,#279110); +#279110 = SURFACE_SIDE_STYLE('',(#279111,#279114)); +#279111 = SURFACE_STYLE_FILL_AREA(#279112); +#279112 = FILL_AREA_STYLE('',(#279113)); +#279113 = FILL_AREA_STYLE_COLOUR('',#272831); +#279114 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279115)); +#279115 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279116 = STYLED_ITEM('color',(#279117),#225629); +#279117 = PRESENTATION_STYLE_ASSIGNMENT((#279118)); +#279118 = SURFACE_STYLE_USAGE(.BOTH.,#279119); +#279119 = SURFACE_SIDE_STYLE('',(#279120,#279123)); +#279120 = SURFACE_STYLE_FILL_AREA(#279121); +#279121 = FILL_AREA_STYLE('',(#279122)); +#279122 = FILL_AREA_STYLE_COLOUR('',#272831); +#279123 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279124)); +#279124 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279125 = STYLED_ITEM('color',(#279126),#225731); +#279126 = PRESENTATION_STYLE_ASSIGNMENT((#279127)); +#279127 = SURFACE_STYLE_USAGE(.BOTH.,#279128); +#279128 = SURFACE_SIDE_STYLE('',(#279129,#279132)); +#279129 = SURFACE_STYLE_FILL_AREA(#279130); +#279130 = FILL_AREA_STYLE('',(#279131)); +#279131 = FILL_AREA_STYLE_COLOUR('',#272831); +#279132 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279133)); +#279133 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279134 = STYLED_ITEM('color',(#279135),#225938); +#279135 = PRESENTATION_STYLE_ASSIGNMENT((#279136)); +#279136 = SURFACE_STYLE_USAGE(.BOTH.,#279137); +#279137 = SURFACE_SIDE_STYLE('',(#279138,#279141)); +#279138 = SURFACE_STYLE_FILL_AREA(#279139); +#279139 = FILL_AREA_STYLE('',(#279140)); +#279140 = FILL_AREA_STYLE_COLOUR('',#272831); +#279141 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279142)); +#279142 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279143 = STYLED_ITEM('color',(#279144),#226194); +#279144 = PRESENTATION_STYLE_ASSIGNMENT((#279145)); +#279145 = SURFACE_STYLE_USAGE(.BOTH.,#279146); +#279146 = SURFACE_SIDE_STYLE('',(#279147,#279150)); +#279147 = SURFACE_STYLE_FILL_AREA(#279148); +#279148 = FILL_AREA_STYLE('',(#279149)); +#279149 = FILL_AREA_STYLE_COLOUR('',#272831); +#279150 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279151)); +#279151 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279152 = STYLED_ITEM('color',(#279153),#226404); +#279153 = PRESENTATION_STYLE_ASSIGNMENT((#279154)); +#279154 = SURFACE_STYLE_USAGE(.BOTH.,#279155); +#279155 = SURFACE_SIDE_STYLE('',(#279156,#279159)); +#279156 = SURFACE_STYLE_FILL_AREA(#279157); +#279157 = FILL_AREA_STYLE('',(#279158)); +#279158 = FILL_AREA_STYLE_COLOUR('',#272831); +#279159 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279160)); +#279160 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279161 = STYLED_ITEM('color',(#279162),#226546); +#279162 = PRESENTATION_STYLE_ASSIGNMENT((#279163)); +#279163 = SURFACE_STYLE_USAGE(.BOTH.,#279164); +#279164 = SURFACE_SIDE_STYLE('',(#279165,#279168)); +#279165 = SURFACE_STYLE_FILL_AREA(#279166); +#279166 = FILL_AREA_STYLE('',(#279167)); +#279167 = FILL_AREA_STYLE_COLOUR('',#272831); +#279168 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279169)); +#279169 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279170 = STYLED_ITEM('color',(#279171),#226753); +#279171 = PRESENTATION_STYLE_ASSIGNMENT((#279172)); +#279172 = SURFACE_STYLE_USAGE(.BOTH.,#279173); +#279173 = SURFACE_SIDE_STYLE('',(#279174,#279177)); +#279174 = SURFACE_STYLE_FILL_AREA(#279175); +#279175 = FILL_AREA_STYLE('',(#279176)); +#279176 = FILL_AREA_STYLE_COLOUR('',#272831); +#279177 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279178)); +#279178 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279179 = STYLED_ITEM('color',(#279180),#226965); +#279180 = PRESENTATION_STYLE_ASSIGNMENT((#279181)); +#279181 = SURFACE_STYLE_USAGE(.BOTH.,#279182); +#279182 = SURFACE_SIDE_STYLE('',(#279183,#279186)); +#279183 = SURFACE_STYLE_FILL_AREA(#279184); +#279184 = FILL_AREA_STYLE('',(#279185)); +#279185 = FILL_AREA_STYLE_COLOUR('',#272831); +#279186 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279187)); +#279187 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279188 = STYLED_ITEM('color',(#279189),#227117); +#279189 = PRESENTATION_STYLE_ASSIGNMENT((#279190)); +#279190 = SURFACE_STYLE_USAGE(.BOTH.,#279191); +#279191 = SURFACE_SIDE_STYLE('',(#279192,#279195)); +#279192 = SURFACE_STYLE_FILL_AREA(#279193); +#279193 = FILL_AREA_STYLE('',(#279194)); +#279194 = FILL_AREA_STYLE_COLOUR('',#272831); +#279195 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279196)); +#279196 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279197 = STYLED_ITEM('color',(#279198),#227161); +#279198 = PRESENTATION_STYLE_ASSIGNMENT((#279199)); +#279199 = SURFACE_STYLE_USAGE(.BOTH.,#279200); +#279200 = SURFACE_SIDE_STYLE('',(#279201,#279204)); +#279201 = SURFACE_STYLE_FILL_AREA(#279202); +#279202 = FILL_AREA_STYLE('',(#279203)); +#279203 = FILL_AREA_STYLE_COLOUR('',#272831); +#279204 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279205)); +#279205 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279206 = STYLED_ITEM('color',(#279207),#227205); +#279207 = PRESENTATION_STYLE_ASSIGNMENT((#279208)); +#279208 = SURFACE_STYLE_USAGE(.BOTH.,#279209); +#279209 = SURFACE_SIDE_STYLE('',(#279210,#279213)); +#279210 = SURFACE_STYLE_FILL_AREA(#279211); +#279211 = FILL_AREA_STYLE('',(#279212)); +#279212 = FILL_AREA_STYLE_COLOUR('',#272831); +#279213 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279214)); +#279214 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279215 = STYLED_ITEM('color',(#279216),#227249); +#279216 = PRESENTATION_STYLE_ASSIGNMENT((#279217)); +#279217 = SURFACE_STYLE_USAGE(.BOTH.,#279218); +#279218 = SURFACE_SIDE_STYLE('',(#279219,#279222)); +#279219 = SURFACE_STYLE_FILL_AREA(#279220); +#279220 = FILL_AREA_STYLE('',(#279221)); +#279221 = FILL_AREA_STYLE_COLOUR('',#272831); +#279222 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279223)); +#279223 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279224 = STYLED_ITEM('color',(#279225),#227293); +#279225 = PRESENTATION_STYLE_ASSIGNMENT((#279226)); +#279226 = SURFACE_STYLE_USAGE(.BOTH.,#279227); +#279227 = SURFACE_SIDE_STYLE('',(#279228,#279231)); +#279228 = SURFACE_STYLE_FILL_AREA(#279229); +#279229 = FILL_AREA_STYLE('',(#279230)); +#279230 = FILL_AREA_STYLE_COLOUR('',#272831); +#279231 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279232)); +#279232 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279233 = STYLED_ITEM('color',(#279234),#227378); +#279234 = PRESENTATION_STYLE_ASSIGNMENT((#279235)); +#279235 = SURFACE_STYLE_USAGE(.BOTH.,#279236); +#279236 = SURFACE_SIDE_STYLE('',(#279237,#279240)); +#279237 = SURFACE_STYLE_FILL_AREA(#279238); +#279238 = FILL_AREA_STYLE('',(#279239)); +#279239 = FILL_AREA_STYLE_COLOUR('',#272831); +#279240 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279241)); +#279241 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279242 = STYLED_ITEM('color',(#279243),#227562); +#279243 = PRESENTATION_STYLE_ASSIGNMENT((#279244)); +#279244 = SURFACE_STYLE_USAGE(.BOTH.,#279245); +#279245 = SURFACE_SIDE_STYLE('',(#279246,#279249)); +#279246 = SURFACE_STYLE_FILL_AREA(#279247); +#279247 = FILL_AREA_STYLE('',(#279248)); +#279248 = FILL_AREA_STYLE_COLOUR('',#272831); +#279249 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279250)); +#279250 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279251 = STYLED_ITEM('color',(#279252),#227704); +#279252 = PRESENTATION_STYLE_ASSIGNMENT((#279253)); +#279253 = SURFACE_STYLE_USAGE(.BOTH.,#279254); +#279254 = SURFACE_SIDE_STYLE('',(#279255,#279258)); +#279255 = SURFACE_STYLE_FILL_AREA(#279256); +#279256 = FILL_AREA_STYLE('',(#279257)); +#279257 = FILL_AREA_STYLE_COLOUR('',#272831); +#279258 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279259)); +#279259 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279260 = STYLED_ITEM('color',(#279261),#227871); +#279261 = PRESENTATION_STYLE_ASSIGNMENT((#279262)); +#279262 = SURFACE_STYLE_USAGE(.BOTH.,#279263); +#279263 = SURFACE_SIDE_STYLE('',(#279264,#279267)); +#279264 = SURFACE_STYLE_FILL_AREA(#279265); +#279265 = FILL_AREA_STYLE('',(#279266)); +#279266 = FILL_AREA_STYLE_COLOUR('',#272831); +#279267 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279268)); +#279268 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279269 = STYLED_ITEM('color',(#279270),#228013); +#279270 = PRESENTATION_STYLE_ASSIGNMENT((#279271)); +#279271 = SURFACE_STYLE_USAGE(.BOTH.,#279272); +#279272 = SURFACE_SIDE_STYLE('',(#279273,#279276)); +#279273 = SURFACE_STYLE_FILL_AREA(#279274); +#279274 = FILL_AREA_STYLE('',(#279275)); +#279275 = FILL_AREA_STYLE_COLOUR('',#272831); +#279276 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279277)); +#279277 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279278 = STYLED_ITEM('color',(#279279),#228180); +#279279 = PRESENTATION_STYLE_ASSIGNMENT((#279280)); +#279280 = SURFACE_STYLE_USAGE(.BOTH.,#279281); +#279281 = SURFACE_SIDE_STYLE('',(#279282,#279285)); +#279282 = SURFACE_STYLE_FILL_AREA(#279283); +#279283 = FILL_AREA_STYLE('',(#279284)); +#279284 = FILL_AREA_STYLE_COLOUR('',#272831); +#279285 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279286)); +#279286 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279287 = STYLED_ITEM('color',(#279288),#228351); +#279288 = PRESENTATION_STYLE_ASSIGNMENT((#279289)); +#279289 = SURFACE_STYLE_USAGE(.BOTH.,#279290); +#279290 = SURFACE_SIDE_STYLE('',(#279291,#279294)); +#279291 = SURFACE_STYLE_FILL_AREA(#279292); +#279292 = FILL_AREA_STYLE('',(#279293)); +#279293 = FILL_AREA_STYLE_COLOUR('',#272831); +#279294 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279295)); +#279295 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279296 = STYLED_ITEM('color',(#279297),#228522); +#279297 = PRESENTATION_STYLE_ASSIGNMENT((#279298)); +#279298 = SURFACE_STYLE_USAGE(.BOTH.,#279299); +#279299 = SURFACE_SIDE_STYLE('',(#279300,#279303)); +#279300 = SURFACE_STYLE_FILL_AREA(#279301); +#279301 = FILL_AREA_STYLE('',(#279302)); +#279302 = FILL_AREA_STYLE_COLOUR('',#272831); +#279303 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279304)); +#279304 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279305 = STYLED_ITEM('color',(#279306),#228693); +#279306 = PRESENTATION_STYLE_ASSIGNMENT((#279307)); +#279307 = SURFACE_STYLE_USAGE(.BOTH.,#279308); +#279308 = SURFACE_SIDE_STYLE('',(#279309,#279312)); +#279309 = SURFACE_STYLE_FILL_AREA(#279310); +#279310 = FILL_AREA_STYLE('',(#279311)); +#279311 = FILL_AREA_STYLE_COLOUR('',#272831); +#279312 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279313)); +#279313 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279314 = STYLED_ITEM('color',(#279315),#228864); +#279315 = PRESENTATION_STYLE_ASSIGNMENT((#279316)); +#279316 = SURFACE_STYLE_USAGE(.BOTH.,#279317); +#279317 = SURFACE_SIDE_STYLE('',(#279318,#279321)); +#279318 = SURFACE_STYLE_FILL_AREA(#279319); +#279319 = FILL_AREA_STYLE('',(#279320)); +#279320 = FILL_AREA_STYLE_COLOUR('',#272831); +#279321 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279322)); +#279322 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279323 = STYLED_ITEM('color',(#279324),#229095); +#279324 = PRESENTATION_STYLE_ASSIGNMENT((#279325)); +#279325 = SURFACE_STYLE_USAGE(.BOTH.,#279326); +#279326 = SURFACE_SIDE_STYLE('',(#279327,#279330)); +#279327 = SURFACE_STYLE_FILL_AREA(#279328); +#279328 = FILL_AREA_STYLE('',(#279329)); +#279329 = FILL_AREA_STYLE_COLOUR('',#272831); +#279330 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279331)); +#279331 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279332 = STYLED_ITEM('color',(#279333),#229261); +#279333 = PRESENTATION_STYLE_ASSIGNMENT((#279334)); +#279334 = SURFACE_STYLE_USAGE(.BOTH.,#279335); +#279335 = SURFACE_SIDE_STYLE('',(#279336,#279339)); +#279336 = SURFACE_STYLE_FILL_AREA(#279337); +#279337 = FILL_AREA_STYLE('',(#279338)); +#279338 = FILL_AREA_STYLE_COLOUR('',#272831); +#279339 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279340)); +#279340 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279341 = STYLED_ITEM('color',(#279342),#229492); +#279342 = PRESENTATION_STYLE_ASSIGNMENT((#279343)); +#279343 = SURFACE_STYLE_USAGE(.BOTH.,#279344); +#279344 = SURFACE_SIDE_STYLE('',(#279345,#279348)); +#279345 = SURFACE_STYLE_FILL_AREA(#279346); +#279346 = FILL_AREA_STYLE('',(#279347)); +#279347 = FILL_AREA_STYLE_COLOUR('',#272831); +#279348 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279349)); +#279349 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279350 = STYLED_ITEM('color',(#279351),#229658); +#279351 = PRESENTATION_STYLE_ASSIGNMENT((#279352)); +#279352 = SURFACE_STYLE_USAGE(.BOTH.,#279353); +#279353 = SURFACE_SIDE_STYLE('',(#279354,#279357)); +#279354 = SURFACE_STYLE_FILL_AREA(#279355); +#279355 = FILL_AREA_STYLE('',(#279356)); +#279356 = FILL_AREA_STYLE_COLOUR('',#272831); +#279357 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279358)); +#279358 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279359 = STYLED_ITEM('color',(#279360),#229894); +#279360 = PRESENTATION_STYLE_ASSIGNMENT((#279361)); +#279361 = SURFACE_STYLE_USAGE(.BOTH.,#279362); +#279362 = SURFACE_SIDE_STYLE('',(#279363,#279366)); +#279363 = SURFACE_STYLE_FILL_AREA(#279364); +#279364 = FILL_AREA_STYLE('',(#279365)); +#279365 = FILL_AREA_STYLE_COLOUR('',#272831); +#279366 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279367)); +#279367 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279368 = STYLED_ITEM('color',(#279369),#229971); +#279369 = PRESENTATION_STYLE_ASSIGNMENT((#279370)); +#279370 = SURFACE_STYLE_USAGE(.BOTH.,#279371); +#279371 = SURFACE_SIDE_STYLE('',(#279372,#279375)); +#279372 = SURFACE_STYLE_FILL_AREA(#279373); +#279373 = FILL_AREA_STYLE('',(#279374)); +#279374 = FILL_AREA_STYLE_COLOUR('',#272831); +#279375 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279376)); +#279376 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279377 = STYLED_ITEM('color',(#279378),#230116); +#279378 = PRESENTATION_STYLE_ASSIGNMENT((#279379)); +#279379 = SURFACE_STYLE_USAGE(.BOTH.,#279380); +#279380 = SURFACE_SIDE_STYLE('',(#279381,#279384)); +#279381 = SURFACE_STYLE_FILL_AREA(#279382); +#279382 = FILL_AREA_STYLE('',(#279383)); +#279383 = FILL_AREA_STYLE_COLOUR('',#272831); +#279384 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279385)); +#279385 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279386 = STYLED_ITEM('color',(#279387),#230294); +#279387 = PRESENTATION_STYLE_ASSIGNMENT((#279388)); +#279388 = SURFACE_STYLE_USAGE(.BOTH.,#279389); +#279389 = SURFACE_SIDE_STYLE('',(#279390,#279393)); +#279390 = SURFACE_STYLE_FILL_AREA(#279391); +#279391 = FILL_AREA_STYLE('',(#279392)); +#279392 = FILL_AREA_STYLE_COLOUR('',#272831); +#279393 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279394)); +#279394 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279395 = STYLED_ITEM('color',(#279396),#230372); +#279396 = PRESENTATION_STYLE_ASSIGNMENT((#279397)); +#279397 = SURFACE_STYLE_USAGE(.BOTH.,#279398); +#279398 = SURFACE_SIDE_STYLE('',(#279399,#279402)); +#279399 = SURFACE_STYLE_FILL_AREA(#279400); +#279400 = FILL_AREA_STYLE('',(#279401)); +#279401 = FILL_AREA_STYLE_COLOUR('',#272831); +#279402 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279403)); +#279403 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279404 = STYLED_ITEM('color',(#279405),#230539); +#279405 = PRESENTATION_STYLE_ASSIGNMENT((#279406)); +#279406 = SURFACE_STYLE_USAGE(.BOTH.,#279407); +#279407 = SURFACE_SIDE_STYLE('',(#279408,#279411)); +#279408 = SURFACE_STYLE_FILL_AREA(#279409); +#279409 = FILL_AREA_STYLE('',(#279410)); +#279410 = FILL_AREA_STYLE_COLOUR('',#272831); +#279411 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279412)); +#279412 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279413 = STYLED_ITEM('color',(#279414),#230667); +#279414 = PRESENTATION_STYLE_ASSIGNMENT((#279415)); +#279415 = SURFACE_STYLE_USAGE(.BOTH.,#279416); +#279416 = SURFACE_SIDE_STYLE('',(#279417,#279420)); +#279417 = SURFACE_STYLE_FILL_AREA(#279418); +#279418 = FILL_AREA_STYLE('',(#279419)); +#279419 = FILL_AREA_STYLE_COLOUR('',#272831); +#279420 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279421)); +#279421 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279422 = STYLED_ITEM('color',(#279423),#230736); +#279423 = PRESENTATION_STYLE_ASSIGNMENT((#279424)); +#279424 = SURFACE_STYLE_USAGE(.BOTH.,#279425); +#279425 = SURFACE_SIDE_STYLE('',(#279426,#279429)); +#279426 = SURFACE_STYLE_FILL_AREA(#279427); +#279427 = FILL_AREA_STYLE('',(#279428)); +#279428 = FILL_AREA_STYLE_COLOUR('',#272831); +#279429 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279430)); +#279430 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279431 = STYLED_ITEM('color',(#279432),#230918); +#279432 = PRESENTATION_STYLE_ASSIGNMENT((#279433)); +#279433 = SURFACE_STYLE_USAGE(.BOTH.,#279434); +#279434 = SURFACE_SIDE_STYLE('',(#279435,#279438)); +#279435 = SURFACE_STYLE_FILL_AREA(#279436); +#279436 = FILL_AREA_STYLE('',(#279437)); +#279437 = FILL_AREA_STYLE_COLOUR('',#272831); +#279438 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279439)); +#279439 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279440 = STYLED_ITEM('color',(#279441),#230987); +#279441 = PRESENTATION_STYLE_ASSIGNMENT((#279442)); +#279442 = SURFACE_STYLE_USAGE(.BOTH.,#279443); +#279443 = SURFACE_SIDE_STYLE('',(#279444,#279447)); +#279444 = SURFACE_STYLE_FILL_AREA(#279445); +#279445 = FILL_AREA_STYLE('',(#279446)); +#279446 = FILL_AREA_STYLE_COLOUR('',#272831); +#279447 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279448)); +#279448 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279449 = STYLED_ITEM('color',(#279450),#231129); +#279450 = PRESENTATION_STYLE_ASSIGNMENT((#279451)); +#279451 = SURFACE_STYLE_USAGE(.BOTH.,#279452); +#279452 = SURFACE_SIDE_STYLE('',(#279453,#279456)); +#279453 = SURFACE_STYLE_FILL_AREA(#279454); +#279454 = FILL_AREA_STYLE('',(#279455)); +#279455 = FILL_AREA_STYLE_COLOUR('',#272831); +#279456 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279457)); +#279457 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279458 = STYLED_ITEM('color',(#279459),#231322); +#279459 = PRESENTATION_STYLE_ASSIGNMENT((#279460)); +#279460 = SURFACE_STYLE_USAGE(.BOTH.,#279461); +#279461 = SURFACE_SIDE_STYLE('',(#279462,#279465)); +#279462 = SURFACE_STYLE_FILL_AREA(#279463); +#279463 = FILL_AREA_STYLE('',(#279464)); +#279464 = FILL_AREA_STYLE_COLOUR('',#272831); +#279465 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279466)); +#279466 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279467 = STYLED_ITEM('color',(#279468),#231374); +#279468 = PRESENTATION_STYLE_ASSIGNMENT((#279469)); +#279469 = SURFACE_STYLE_USAGE(.BOTH.,#279470); +#279470 = SURFACE_SIDE_STYLE('',(#279471,#279474)); +#279471 = SURFACE_STYLE_FILL_AREA(#279472); +#279472 = FILL_AREA_STYLE('',(#279473)); +#279473 = FILL_AREA_STYLE_COLOUR('',#272831); +#279474 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279475)); +#279475 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279476 = STYLED_ITEM('color',(#279477),#231426); +#279477 = PRESENTATION_STYLE_ASSIGNMENT((#279478)); +#279478 = SURFACE_STYLE_USAGE(.BOTH.,#279479); +#279479 = SURFACE_SIDE_STYLE('',(#279480,#279483)); +#279480 = SURFACE_STYLE_FILL_AREA(#279481); +#279481 = FILL_AREA_STYLE('',(#279482)); +#279482 = FILL_AREA_STYLE_COLOUR('',#272831); +#279483 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279484)); +#279484 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279485 = STYLED_ITEM('color',(#279486),#231536); +#279486 = PRESENTATION_STYLE_ASSIGNMENT((#279487)); +#279487 = SURFACE_STYLE_USAGE(.BOTH.,#279488); +#279488 = SURFACE_SIDE_STYLE('',(#279489,#279492)); +#279489 = SURFACE_STYLE_FILL_AREA(#279490); +#279490 = FILL_AREA_STYLE('',(#279491)); +#279491 = FILL_AREA_STYLE_COLOUR('',#272831); +#279492 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279493)); +#279493 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279494 = STYLED_ITEM('color',(#279495),#231604); +#279495 = PRESENTATION_STYLE_ASSIGNMENT((#279496)); +#279496 = SURFACE_STYLE_USAGE(.BOTH.,#279497); +#279497 = SURFACE_SIDE_STYLE('',(#279498,#279501)); +#279498 = SURFACE_STYLE_FILL_AREA(#279499); +#279499 = FILL_AREA_STYLE('',(#279500)); +#279500 = FILL_AREA_STYLE_COLOUR('',#272831); +#279501 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279502)); +#279502 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279503 = STYLED_ITEM('color',(#279504),#231704); +#279504 = PRESENTATION_STYLE_ASSIGNMENT((#279505)); +#279505 = SURFACE_STYLE_USAGE(.BOTH.,#279506); +#279506 = SURFACE_SIDE_STYLE('',(#279507,#279510)); +#279507 = SURFACE_STYLE_FILL_AREA(#279508); +#279508 = FILL_AREA_STYLE('',(#279509)); +#279509 = FILL_AREA_STYLE_COLOUR('',#272831); +#279510 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279511)); +#279511 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279512 = STYLED_ITEM('color',(#279513),#231796); +#279513 = PRESENTATION_STYLE_ASSIGNMENT((#279514)); +#279514 = SURFACE_STYLE_USAGE(.BOTH.,#279515); +#279515 = SURFACE_SIDE_STYLE('',(#279516,#279519)); +#279516 = SURFACE_STYLE_FILL_AREA(#279517); +#279517 = FILL_AREA_STYLE('',(#279518)); +#279518 = FILL_AREA_STYLE_COLOUR('',#272831); +#279519 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279520)); +#279520 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279521 = STYLED_ITEM('color',(#279522),#232027); +#279522 = PRESENTATION_STYLE_ASSIGNMENT((#279523)); +#279523 = SURFACE_STYLE_USAGE(.BOTH.,#279524); +#279524 = SURFACE_SIDE_STYLE('',(#279525,#279528)); +#279525 = SURFACE_STYLE_FILL_AREA(#279526); +#279526 = FILL_AREA_STYLE('',(#279527)); +#279527 = FILL_AREA_STYLE_COLOUR('',#272831); +#279528 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279529)); +#279529 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279530 = STYLED_ITEM('color',(#279531),#232137); +#279531 = PRESENTATION_STYLE_ASSIGNMENT((#279532)); +#279532 = SURFACE_STYLE_USAGE(.BOTH.,#279533); +#279533 = SURFACE_SIDE_STYLE('',(#279534,#279537)); +#279534 = SURFACE_STYLE_FILL_AREA(#279535); +#279535 = FILL_AREA_STYLE('',(#279536)); +#279536 = FILL_AREA_STYLE_COLOUR('',#272831); +#279537 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279538)); +#279538 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279539 = STYLED_ITEM('color',(#279540),#232281); +#279540 = PRESENTATION_STYLE_ASSIGNMENT((#279541)); +#279541 = SURFACE_STYLE_USAGE(.BOTH.,#279542); +#279542 = SURFACE_SIDE_STYLE('',(#279543,#279546)); +#279543 = SURFACE_STYLE_FILL_AREA(#279544); +#279544 = FILL_AREA_STYLE('',(#279545)); +#279545 = FILL_AREA_STYLE_COLOUR('',#272831); +#279546 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279547)); +#279547 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279548 = STYLED_ITEM('color',(#279549),#232416); +#279549 = PRESENTATION_STYLE_ASSIGNMENT((#279550)); +#279550 = SURFACE_STYLE_USAGE(.BOTH.,#279551); +#279551 = SURFACE_SIDE_STYLE('',(#279552,#279555)); +#279552 = SURFACE_STYLE_FILL_AREA(#279553); +#279553 = FILL_AREA_STYLE('',(#279554)); +#279554 = FILL_AREA_STYLE_COLOUR('',#272831); +#279555 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279556)); +#279556 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279557 = STYLED_ITEM('color',(#279558),#232610); +#279558 = PRESENTATION_STYLE_ASSIGNMENT((#279559)); +#279559 = SURFACE_STYLE_USAGE(.BOTH.,#279560); +#279560 = SURFACE_SIDE_STYLE('',(#279561,#279564)); +#279561 = SURFACE_STYLE_FILL_AREA(#279562); +#279562 = FILL_AREA_STYLE('',(#279563)); +#279563 = FILL_AREA_STYLE_COLOUR('',#272831); +#279564 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279565)); +#279565 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279566 = STYLED_ITEM('color',(#279567),#232859); +#279567 = PRESENTATION_STYLE_ASSIGNMENT((#279568)); +#279568 = SURFACE_STYLE_USAGE(.BOTH.,#279569); +#279569 = SURFACE_SIDE_STYLE('',(#279570,#279573)); +#279570 = SURFACE_STYLE_FILL_AREA(#279571); +#279571 = FILL_AREA_STYLE('',(#279572)); +#279572 = FILL_AREA_STYLE_COLOUR('',#272831); +#279573 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279574)); +#279574 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279575 = STYLED_ITEM('color',(#279576),#232953); +#279576 = PRESENTATION_STYLE_ASSIGNMENT((#279577)); +#279577 = SURFACE_STYLE_USAGE(.BOTH.,#279578); +#279578 = SURFACE_SIDE_STYLE('',(#279579,#279582)); +#279579 = SURFACE_STYLE_FILL_AREA(#279580); +#279580 = FILL_AREA_STYLE('',(#279581)); +#279581 = FILL_AREA_STYLE_COLOUR('',#272831); +#279582 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279583)); +#279583 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279584 = STYLED_ITEM('color',(#279585),#233047); +#279585 = PRESENTATION_STYLE_ASSIGNMENT((#279586)); +#279586 = SURFACE_STYLE_USAGE(.BOTH.,#279587); +#279587 = SURFACE_SIDE_STYLE('',(#279588,#279591)); +#279588 = SURFACE_STYLE_FILL_AREA(#279589); +#279589 = FILL_AREA_STYLE('',(#279590)); +#279590 = FILL_AREA_STYLE_COLOUR('',#272831); +#279591 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279592)); +#279592 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279593 = STYLED_ITEM('color',(#279594),#233315); +#279594 = PRESENTATION_STYLE_ASSIGNMENT((#279595)); +#279595 = SURFACE_STYLE_USAGE(.BOTH.,#279596); +#279596 = SURFACE_SIDE_STYLE('',(#279597,#279600)); +#279597 = SURFACE_STYLE_FILL_AREA(#279598); +#279598 = FILL_AREA_STYLE('',(#279599)); +#279599 = FILL_AREA_STYLE_COLOUR('',#272831); +#279600 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279601)); +#279601 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279602 = STYLED_ITEM('color',(#279603),#233564); +#279603 = PRESENTATION_STYLE_ASSIGNMENT((#279604)); +#279604 = SURFACE_STYLE_USAGE(.BOTH.,#279605); +#279605 = SURFACE_SIDE_STYLE('',(#279606,#279609)); +#279606 = SURFACE_STYLE_FILL_AREA(#279607); +#279607 = FILL_AREA_STYLE('',(#279608)); +#279608 = FILL_AREA_STYLE_COLOUR('',#272831); +#279609 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279610)); +#279610 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279611 = STYLED_ITEM('color',(#279612),#233674); +#279612 = PRESENTATION_STYLE_ASSIGNMENT((#279613)); +#279613 = SURFACE_STYLE_USAGE(.BOTH.,#279614); +#279614 = SURFACE_SIDE_STYLE('',(#279615,#279618)); +#279615 = SURFACE_STYLE_FILL_AREA(#279616); +#279616 = FILL_AREA_STYLE('',(#279617)); +#279617 = FILL_AREA_STYLE_COLOUR('',#272831); +#279618 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279619)); +#279619 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279620 = STYLED_ITEM('color',(#279621),#233842); +#279621 = PRESENTATION_STYLE_ASSIGNMENT((#279622)); +#279622 = SURFACE_STYLE_USAGE(.BOTH.,#279623); +#279623 = SURFACE_SIDE_STYLE('',(#279624,#279627)); +#279624 = SURFACE_STYLE_FILL_AREA(#279625); +#279625 = FILL_AREA_STYLE('',(#279626)); +#279626 = FILL_AREA_STYLE_COLOUR('',#272831); +#279627 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279628)); +#279628 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279629 = STYLED_ITEM('color',(#279630),#233886); +#279630 = PRESENTATION_STYLE_ASSIGNMENT((#279631)); +#279631 = SURFACE_STYLE_USAGE(.BOTH.,#279632); +#279632 = SURFACE_SIDE_STYLE('',(#279633,#279636)); +#279633 = SURFACE_STYLE_FILL_AREA(#279634); +#279634 = FILL_AREA_STYLE('',(#279635)); +#279635 = FILL_AREA_STYLE_COLOUR('',#272831); +#279636 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279637)); +#279637 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279638 = STYLED_ITEM('color',(#279639),#234096); +#279639 = PRESENTATION_STYLE_ASSIGNMENT((#279640)); +#279640 = SURFACE_STYLE_USAGE(.BOTH.,#279641); +#279641 = SURFACE_SIDE_STYLE('',(#279642,#279645)); +#279642 = SURFACE_STYLE_FILL_AREA(#279643); +#279643 = FILL_AREA_STYLE('',(#279644)); +#279644 = FILL_AREA_STYLE_COLOUR('',#272831); +#279645 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279646)); +#279646 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279647 = STYLED_ITEM('color',(#279648),#234274); +#279648 = PRESENTATION_STYLE_ASSIGNMENT((#279649)); +#279649 = SURFACE_STYLE_USAGE(.BOTH.,#279650); +#279650 = SURFACE_SIDE_STYLE('',(#279651,#279654)); +#279651 = SURFACE_STYLE_FILL_AREA(#279652); +#279652 = FILL_AREA_STYLE('',(#279653)); +#279653 = FILL_AREA_STYLE_COLOUR('',#272831); +#279654 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279655)); +#279655 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279656 = STYLED_ITEM('color',(#279657),#234359); +#279657 = PRESENTATION_STYLE_ASSIGNMENT((#279658)); +#279658 = SURFACE_STYLE_USAGE(.BOTH.,#279659); +#279659 = SURFACE_SIDE_STYLE('',(#279660,#279663)); +#279660 = SURFACE_STYLE_FILL_AREA(#279661); +#279661 = FILL_AREA_STYLE('',(#279662)); +#279662 = FILL_AREA_STYLE_COLOUR('',#272831); +#279663 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279664)); +#279664 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279665 = STYLED_ITEM('color',(#279666),#234501); +#279666 = PRESENTATION_STYLE_ASSIGNMENT((#279667)); +#279667 = SURFACE_STYLE_USAGE(.BOTH.,#279668); +#279668 = SURFACE_SIDE_STYLE('',(#279669,#279672)); +#279669 = SURFACE_STYLE_FILL_AREA(#279670); +#279670 = FILL_AREA_STYLE('',(#279671)); +#279671 = FILL_AREA_STYLE_COLOUR('',#272831); +#279672 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279673)); +#279673 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279674 = STYLED_ITEM('color',(#279675),#234627); +#279675 = PRESENTATION_STYLE_ASSIGNMENT((#279676)); +#279676 = SURFACE_STYLE_USAGE(.BOTH.,#279677); +#279677 = SURFACE_SIDE_STYLE('',(#279678,#279681)); +#279678 = SURFACE_STYLE_FILL_AREA(#279679); +#279679 = FILL_AREA_STYLE('',(#279680)); +#279680 = FILL_AREA_STYLE_COLOUR('',#272831); +#279681 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279682)); +#279682 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279683 = STYLED_ITEM('color',(#279684),#234876); +#279684 = PRESENTATION_STYLE_ASSIGNMENT((#279685)); +#279685 = SURFACE_STYLE_USAGE(.BOTH.,#279686); +#279686 = SURFACE_SIDE_STYLE('',(#279687,#279690)); +#279687 = SURFACE_STYLE_FILL_AREA(#279688); +#279688 = FILL_AREA_STYLE('',(#279689)); +#279689 = FILL_AREA_STYLE_COLOUR('',#272831); +#279690 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279691)); +#279691 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279692 = STYLED_ITEM('color',(#279693),#235038); +#279693 = PRESENTATION_STYLE_ASSIGNMENT((#279694)); +#279694 = SURFACE_STYLE_USAGE(.BOTH.,#279695); +#279695 = SURFACE_SIDE_STYLE('',(#279696,#279699)); +#279696 = SURFACE_STYLE_FILL_AREA(#279697); +#279697 = FILL_AREA_STYLE('',(#279698)); +#279698 = FILL_AREA_STYLE_COLOUR('',#272831); +#279699 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279700)); +#279700 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279701 = STYLED_ITEM('color',(#279702),#235115); +#279702 = PRESENTATION_STYLE_ASSIGNMENT((#279703)); +#279703 = SURFACE_STYLE_USAGE(.BOTH.,#279704); +#279704 = SURFACE_SIDE_STYLE('',(#279705,#279708)); +#279705 = SURFACE_STYLE_FILL_AREA(#279706); +#279706 = FILL_AREA_STYLE('',(#279707)); +#279707 = FILL_AREA_STYLE_COLOUR('',#272831); +#279708 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279709)); +#279709 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279710 = STYLED_ITEM('color',(#279711),#235200); +#279711 = PRESENTATION_STYLE_ASSIGNMENT((#279712)); +#279712 = SURFACE_STYLE_USAGE(.BOTH.,#279713); +#279713 = SURFACE_SIDE_STYLE('',(#279714,#279717)); +#279714 = SURFACE_STYLE_FILL_AREA(#279715); +#279715 = FILL_AREA_STYLE('',(#279716)); +#279716 = FILL_AREA_STYLE_COLOUR('',#272831); +#279717 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279718)); +#279718 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279719 = STYLED_ITEM('color',(#279720),#235285); +#279720 = PRESENTATION_STYLE_ASSIGNMENT((#279721)); +#279721 = SURFACE_STYLE_USAGE(.BOTH.,#279722); +#279722 = SURFACE_SIDE_STYLE('',(#279723,#279726)); +#279723 = SURFACE_STYLE_FILL_AREA(#279724); +#279724 = FILL_AREA_STYLE('',(#279725)); +#279725 = FILL_AREA_STYLE_COLOUR('',#272831); +#279726 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279727)); +#279727 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279728 = STYLED_ITEM('color',(#279729),#235453); +#279729 = PRESENTATION_STYLE_ASSIGNMENT((#279730)); +#279730 = SURFACE_STYLE_USAGE(.BOTH.,#279731); +#279731 = SURFACE_SIDE_STYLE('',(#279732,#279735)); +#279732 = SURFACE_STYLE_FILL_AREA(#279733); +#279733 = FILL_AREA_STYLE('',(#279734)); +#279734 = FILL_AREA_STYLE_COLOUR('',#272831); +#279735 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279736)); +#279736 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279737 = STYLED_ITEM('color',(#279738),#235733); +#279738 = PRESENTATION_STYLE_ASSIGNMENT((#279739)); +#279739 = SURFACE_STYLE_USAGE(.BOTH.,#279740); +#279740 = SURFACE_SIDE_STYLE('',(#279741,#279744)); +#279741 = SURFACE_STYLE_FILL_AREA(#279742); +#279742 = FILL_AREA_STYLE('',(#279743)); +#279743 = FILL_AREA_STYLE_COLOUR('',#272831); +#279744 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279745)); +#279745 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279746 = STYLED_ITEM('color',(#279747),#235911); +#279747 = PRESENTATION_STYLE_ASSIGNMENT((#279748)); +#279748 = SURFACE_STYLE_USAGE(.BOTH.,#279749); +#279749 = SURFACE_SIDE_STYLE('',(#279750,#279753)); +#279750 = SURFACE_STYLE_FILL_AREA(#279751); +#279751 = FILL_AREA_STYLE('',(#279752)); +#279752 = FILL_AREA_STYLE_COLOUR('',#272831); +#279753 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279754)); +#279754 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279755 = STYLED_ITEM('color',(#279756),#235963); +#279756 = PRESENTATION_STYLE_ASSIGNMENT((#279757)); +#279757 = SURFACE_STYLE_USAGE(.BOTH.,#279758); +#279758 = SURFACE_SIDE_STYLE('',(#279759,#279762)); +#279759 = SURFACE_STYLE_FILL_AREA(#279760); +#279760 = FILL_AREA_STYLE('',(#279761)); +#279761 = FILL_AREA_STYLE_COLOUR('',#272831); +#279762 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279763)); +#279763 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279764 = STYLED_ITEM('color',(#279765),#236015); +#279765 = PRESENTATION_STYLE_ASSIGNMENT((#279766)); +#279766 = SURFACE_STYLE_USAGE(.BOTH.,#279767); +#279767 = SURFACE_SIDE_STYLE('',(#279768,#279771)); +#279768 = SURFACE_STYLE_FILL_AREA(#279769); +#279769 = FILL_AREA_STYLE('',(#279770)); +#279770 = FILL_AREA_STYLE_COLOUR('',#272831); +#279771 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279772)); +#279772 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279773 = STYLED_ITEM('color',(#279774),#236067); +#279774 = PRESENTATION_STYLE_ASSIGNMENT((#279775)); +#279775 = SURFACE_STYLE_USAGE(.BOTH.,#279776); +#279776 = SURFACE_SIDE_STYLE('',(#279777,#279780)); +#279777 = SURFACE_STYLE_FILL_AREA(#279778); +#279778 = FILL_AREA_STYLE('',(#279779)); +#279779 = FILL_AREA_STYLE_COLOUR('',#272831); +#279780 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279781)); +#279781 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279782 = STYLED_ITEM('color',(#279783),#236152); +#279783 = PRESENTATION_STYLE_ASSIGNMENT((#279784)); +#279784 = SURFACE_STYLE_USAGE(.BOTH.,#279785); +#279785 = SURFACE_SIDE_STYLE('',(#279786,#279789)); +#279786 = SURFACE_STYLE_FILL_AREA(#279787); +#279787 = FILL_AREA_STYLE('',(#279788)); +#279788 = FILL_AREA_STYLE_COLOUR('',#272831); +#279789 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279790)); +#279790 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279791 = STYLED_ITEM('color',(#279792),#236353); +#279792 = PRESENTATION_STYLE_ASSIGNMENT((#279793)); +#279793 = SURFACE_STYLE_USAGE(.BOTH.,#279794); +#279794 = SURFACE_SIDE_STYLE('',(#279795,#279798)); +#279795 = SURFACE_STYLE_FILL_AREA(#279796); +#279796 = FILL_AREA_STYLE('',(#279797)); +#279797 = FILL_AREA_STYLE_COLOUR('',#272831); +#279798 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279799)); +#279799 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279800 = STYLED_ITEM('color',(#279801),#236405); +#279801 = PRESENTATION_STYLE_ASSIGNMENT((#279802)); +#279802 = SURFACE_STYLE_USAGE(.BOTH.,#279803); +#279803 = SURFACE_SIDE_STYLE('',(#279804,#279807)); +#279804 = SURFACE_STYLE_FILL_AREA(#279805); +#279805 = FILL_AREA_STYLE('',(#279806)); +#279806 = FILL_AREA_STYLE_COLOUR('',#272831); +#279807 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279808)); +#279808 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279809 = STYLED_ITEM('color',(#279810),#236508); +#279810 = PRESENTATION_STYLE_ASSIGNMENT((#279811)); +#279811 = SURFACE_STYLE_USAGE(.BOTH.,#279812); +#279812 = SURFACE_SIDE_STYLE('',(#279813,#279816)); +#279813 = SURFACE_STYLE_FILL_AREA(#279814); +#279814 = FILL_AREA_STYLE('',(#279815)); +#279815 = FILL_AREA_STYLE_COLOUR('',#272831); +#279816 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279817)); +#279817 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279818 = STYLED_ITEM('color',(#279819),#236593); +#279819 = PRESENTATION_STYLE_ASSIGNMENT((#279820)); +#279820 = SURFACE_STYLE_USAGE(.BOTH.,#279821); +#279821 = SURFACE_SIDE_STYLE('',(#279822,#279825)); +#279822 = SURFACE_STYLE_FILL_AREA(#279823); +#279823 = FILL_AREA_STYLE('',(#279824)); +#279824 = FILL_AREA_STYLE_COLOUR('',#272831); +#279825 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279826)); +#279826 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279827 = STYLED_ITEM('color',(#279828),#236760); +#279828 = PRESENTATION_STYLE_ASSIGNMENT((#279829)); +#279829 = SURFACE_STYLE_USAGE(.BOTH.,#279830); +#279830 = SURFACE_SIDE_STYLE('',(#279831,#279834)); +#279831 = SURFACE_STYLE_FILL_AREA(#279832); +#279832 = FILL_AREA_STYLE('',(#279833)); +#279833 = FILL_AREA_STYLE_COLOUR('',#272831); +#279834 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279835)); +#279835 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279836 = STYLED_ITEM('color',(#279837),#236854); +#279837 = PRESENTATION_STYLE_ASSIGNMENT((#279838)); +#279838 = SURFACE_STYLE_USAGE(.BOTH.,#279839); +#279839 = SURFACE_SIDE_STYLE('',(#279840,#279843)); +#279840 = SURFACE_STYLE_FILL_AREA(#279841); +#279841 = FILL_AREA_STYLE('',(#279842)); +#279842 = FILL_AREA_STYLE_COLOUR('',#272831); +#279843 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279844)); +#279844 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279845 = STYLED_ITEM('color',(#279846),#236989); +#279846 = PRESENTATION_STYLE_ASSIGNMENT((#279847)); +#279847 = SURFACE_STYLE_USAGE(.BOTH.,#279848); +#279848 = SURFACE_SIDE_STYLE('',(#279849,#279852)); +#279849 = SURFACE_STYLE_FILL_AREA(#279850); +#279850 = FILL_AREA_STYLE('',(#279851)); +#279851 = FILL_AREA_STYLE_COLOUR('',#272831); +#279852 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279853)); +#279853 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279854 = STYLED_ITEM('color',(#279855),#237198); +#279855 = PRESENTATION_STYLE_ASSIGNMENT((#279856)); +#279856 = SURFACE_STYLE_USAGE(.BOTH.,#279857); +#279857 = SURFACE_SIDE_STYLE('',(#279858,#279861)); +#279858 = SURFACE_STYLE_FILL_AREA(#279859); +#279859 = FILL_AREA_STYLE('',(#279860)); +#279860 = FILL_AREA_STYLE_COLOUR('',#272831); +#279861 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279862)); +#279862 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279863 = STYLED_ITEM('color',(#279864),#237392); +#279864 = PRESENTATION_STYLE_ASSIGNMENT((#279865)); +#279865 = SURFACE_STYLE_USAGE(.BOTH.,#279866); +#279866 = SURFACE_SIDE_STYLE('',(#279867,#279870)); +#279867 = SURFACE_STYLE_FILL_AREA(#279868); +#279868 = FILL_AREA_STYLE('',(#279869)); +#279869 = FILL_AREA_STYLE_COLOUR('',#272831); +#279870 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279871)); +#279871 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279872 = STYLED_ITEM('color',(#279873),#237570); +#279873 = PRESENTATION_STYLE_ASSIGNMENT((#279874)); +#279874 = SURFACE_STYLE_USAGE(.BOTH.,#279875); +#279875 = SURFACE_SIDE_STYLE('',(#279876,#279879)); +#279876 = SURFACE_STYLE_FILL_AREA(#279877); +#279877 = FILL_AREA_STYLE('',(#279878)); +#279878 = FILL_AREA_STYLE_COLOUR('',#272831); +#279879 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279880)); +#279880 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279881 = STYLED_ITEM('color',(#279882),#237688); +#279882 = PRESENTATION_STYLE_ASSIGNMENT((#279883)); +#279883 = SURFACE_STYLE_USAGE(.BOTH.,#279884); +#279884 = SURFACE_SIDE_STYLE('',(#279885,#279888)); +#279885 = SURFACE_STYLE_FILL_AREA(#279886); +#279886 = FILL_AREA_STYLE('',(#279887)); +#279887 = FILL_AREA_STYLE_COLOUR('',#272831); +#279888 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279889)); +#279889 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279890 = STYLED_ITEM('color',(#279891),#237823); +#279891 = PRESENTATION_STYLE_ASSIGNMENT((#279892)); +#279892 = SURFACE_STYLE_USAGE(.BOTH.,#279893); +#279893 = SURFACE_SIDE_STYLE('',(#279894,#279897)); +#279894 = SURFACE_STYLE_FILL_AREA(#279895); +#279895 = FILL_AREA_STYLE('',(#279896)); +#279896 = FILL_AREA_STYLE_COLOUR('',#272831); +#279897 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279898)); +#279898 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279899 = STYLED_ITEM('color',(#279900),#237908); +#279900 = PRESENTATION_STYLE_ASSIGNMENT((#279901)); +#279901 = SURFACE_STYLE_USAGE(.BOTH.,#279902); +#279902 = SURFACE_SIDE_STYLE('',(#279903,#279906)); +#279903 = SURFACE_STYLE_FILL_AREA(#279904); +#279904 = FILL_AREA_STYLE('',(#279905)); +#279905 = FILL_AREA_STYLE_COLOUR('',#272831); +#279906 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279907)); +#279907 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279908 = STYLED_ITEM('color',(#279909),#238020); +#279909 = PRESENTATION_STYLE_ASSIGNMENT((#279910)); +#279910 = SURFACE_STYLE_USAGE(.BOTH.,#279911); +#279911 = SURFACE_SIDE_STYLE('',(#279912,#279915)); +#279912 = SURFACE_STYLE_FILL_AREA(#279913); +#279913 = FILL_AREA_STYLE('',(#279914)); +#279914 = FILL_AREA_STYLE_COLOUR('',#272831); +#279915 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279916)); +#279916 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279917 = STYLED_ITEM('color',(#279918),#238114); +#279918 = PRESENTATION_STYLE_ASSIGNMENT((#279919)); +#279919 = SURFACE_STYLE_USAGE(.BOTH.,#279920); +#279920 = SURFACE_SIDE_STYLE('',(#279921,#279924)); +#279921 = SURFACE_STYLE_FILL_AREA(#279922); +#279922 = FILL_AREA_STYLE('',(#279923)); +#279923 = FILL_AREA_STYLE_COLOUR('',#272831); +#279924 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279925)); +#279925 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279926 = STYLED_ITEM('color',(#279927),#238394); +#279927 = PRESENTATION_STYLE_ASSIGNMENT((#279928)); +#279928 = SURFACE_STYLE_USAGE(.BOTH.,#279929); +#279929 = SURFACE_SIDE_STYLE('',(#279930,#279933)); +#279930 = SURFACE_STYLE_FILL_AREA(#279931); +#279931 = FILL_AREA_STYLE('',(#279932)); +#279932 = FILL_AREA_STYLE_COLOUR('',#272831); +#279933 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279934)); +#279934 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279935 = STYLED_ITEM('color',(#279936),#238674); +#279936 = PRESENTATION_STYLE_ASSIGNMENT((#279937)); +#279937 = SURFACE_STYLE_USAGE(.BOTH.,#279938); +#279938 = SURFACE_SIDE_STYLE('',(#279939,#279942)); +#279939 = SURFACE_STYLE_FILL_AREA(#279940); +#279940 = FILL_AREA_STYLE('',(#279941)); +#279941 = FILL_AREA_STYLE_COLOUR('',#272831); +#279942 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279943)); +#279943 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279944 = STYLED_ITEM('color',(#279945),#238852); +#279945 = PRESENTATION_STYLE_ASSIGNMENT((#279946)); +#279946 = SURFACE_STYLE_USAGE(.BOTH.,#279947); +#279947 = SURFACE_SIDE_STYLE('',(#279948,#279951)); +#279948 = SURFACE_STYLE_FILL_AREA(#279949); +#279949 = FILL_AREA_STYLE('',(#279950)); +#279950 = FILL_AREA_STYLE_COLOUR('',#272831); +#279951 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279952)); +#279952 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279953 = STYLED_ITEM('color',(#279954),#238937); +#279954 = PRESENTATION_STYLE_ASSIGNMENT((#279955)); +#279955 = SURFACE_STYLE_USAGE(.BOTH.,#279956); +#279956 = SURFACE_SIDE_STYLE('',(#279957,#279960)); +#279957 = SURFACE_STYLE_FILL_AREA(#279958); +#279958 = FILL_AREA_STYLE('',(#279959)); +#279959 = FILL_AREA_STYLE_COLOUR('',#272831); +#279960 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279961)); +#279961 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279962 = STYLED_ITEM('color',(#279963),#239138); +#279963 = PRESENTATION_STYLE_ASSIGNMENT((#279964)); +#279964 = SURFACE_STYLE_USAGE(.BOTH.,#279965); +#279965 = SURFACE_SIDE_STYLE('',(#279966,#279969)); +#279966 = SURFACE_STYLE_FILL_AREA(#279967); +#279967 = FILL_AREA_STYLE('',(#279968)); +#279968 = FILL_AREA_STYLE_COLOUR('',#272831); +#279969 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279970)); +#279970 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279971 = STYLED_ITEM('color',(#279972),#239322); +#279972 = PRESENTATION_STYLE_ASSIGNMENT((#279973)); +#279973 = SURFACE_STYLE_USAGE(.BOTH.,#279974); +#279974 = SURFACE_SIDE_STYLE('',(#279975,#279978)); +#279975 = SURFACE_STYLE_FILL_AREA(#279976); +#279976 = FILL_AREA_STYLE('',(#279977)); +#279977 = FILL_AREA_STYLE_COLOUR('',#272831); +#279978 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279979)); +#279979 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279980 = STYLED_ITEM('color',(#279981),#239399); +#279981 = PRESENTATION_STYLE_ASSIGNMENT((#279982)); +#279982 = SURFACE_STYLE_USAGE(.BOTH.,#279983); +#279983 = SURFACE_SIDE_STYLE('',(#279984,#279987)); +#279984 = SURFACE_STYLE_FILL_AREA(#279985); +#279985 = FILL_AREA_STYLE('',(#279986)); +#279986 = FILL_AREA_STYLE_COLOUR('',#272831); +#279987 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279988)); +#279988 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279989 = STYLED_ITEM('color',(#279990),#239523); +#279990 = PRESENTATION_STYLE_ASSIGNMENT((#279991)); +#279991 = SURFACE_STYLE_USAGE(.BOTH.,#279992); +#279992 = SURFACE_SIDE_STYLE('',(#279993,#279996)); +#279993 = SURFACE_STYLE_FILL_AREA(#279994); +#279994 = FILL_AREA_STYLE('',(#279995)); +#279995 = FILL_AREA_STYLE_COLOUR('',#272831); +#279996 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#279997)); +#279997 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#279998 = STYLED_ITEM('color',(#279999),#239567); +#279999 = PRESENTATION_STYLE_ASSIGNMENT((#280000)); +#280000 = SURFACE_STYLE_USAGE(.BOTH.,#280001); +#280001 = SURFACE_SIDE_STYLE('',(#280002,#280005)); +#280002 = SURFACE_STYLE_FILL_AREA(#280003); +#280003 = FILL_AREA_STYLE('',(#280004)); +#280004 = FILL_AREA_STYLE_COLOUR('',#272831); +#280005 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280006)); +#280006 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280007 = STYLED_ITEM('color',(#280008),#239652); +#280008 = PRESENTATION_STYLE_ASSIGNMENT((#280009)); +#280009 = SURFACE_STYLE_USAGE(.BOTH.,#280010); +#280010 = SURFACE_SIDE_STYLE('',(#280011,#280014)); +#280011 = SURFACE_STYLE_FILL_AREA(#280012); +#280012 = FILL_AREA_STYLE('',(#280013)); +#280013 = FILL_AREA_STYLE_COLOUR('',#272831); +#280014 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280015)); +#280015 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280016 = STYLED_ITEM('color',(#280017),#239818); +#280017 = PRESENTATION_STYLE_ASSIGNMENT((#280018)); +#280018 = SURFACE_STYLE_USAGE(.BOTH.,#280019); +#280019 = SURFACE_SIDE_STYLE('',(#280020,#280023)); +#280020 = SURFACE_STYLE_FILL_AREA(#280021); +#280021 = FILL_AREA_STYLE('',(#280022)); +#280022 = FILL_AREA_STYLE_COLOUR('',#272831); +#280023 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280024)); +#280024 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280025 = STYLED_ITEM('color',(#280026),#239951); +#280026 = PRESENTATION_STYLE_ASSIGNMENT((#280027)); +#280027 = SURFACE_STYLE_USAGE(.BOTH.,#280028); +#280028 = SURFACE_SIDE_STYLE('',(#280029,#280032)); +#280029 = SURFACE_STYLE_FILL_AREA(#280030); +#280030 = FILL_AREA_STYLE('',(#280031)); +#280031 = FILL_AREA_STYLE_COLOUR('',#272831); +#280032 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280033)); +#280033 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280034 = STYLED_ITEM('color',(#280035),#240061); +#280035 = PRESENTATION_STYLE_ASSIGNMENT((#280036)); +#280036 = SURFACE_STYLE_USAGE(.BOTH.,#280037); +#280037 = SURFACE_SIDE_STYLE('',(#280038,#280041)); +#280038 = SURFACE_STYLE_FILL_AREA(#280039); +#280039 = FILL_AREA_STYLE('',(#280040)); +#280040 = FILL_AREA_STYLE_COLOUR('',#272831); +#280041 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280042)); +#280042 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280043 = STYLED_ITEM('color',(#280044),#240341); +#280044 = PRESENTATION_STYLE_ASSIGNMENT((#280045)); +#280045 = SURFACE_STYLE_USAGE(.BOTH.,#280046); +#280046 = SURFACE_SIDE_STYLE('',(#280047,#280050)); +#280047 = SURFACE_STYLE_FILL_AREA(#280048); +#280048 = FILL_AREA_STYLE('',(#280049)); +#280049 = FILL_AREA_STYLE_COLOUR('',#272831); +#280050 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280051)); +#280051 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280052 = STYLED_ITEM('color',(#280053),#240460); +#280053 = PRESENTATION_STYLE_ASSIGNMENT((#280054)); +#280054 = SURFACE_STYLE_USAGE(.BOTH.,#280055); +#280055 = SURFACE_SIDE_STYLE('',(#280056,#280059)); +#280056 = SURFACE_STYLE_FILL_AREA(#280057); +#280057 = FILL_AREA_STYLE('',(#280058)); +#280058 = FILL_AREA_STYLE_COLOUR('',#272831); +#280059 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280060)); +#280060 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280061 = STYLED_ITEM('color',(#280062),#240504); +#280062 = PRESENTATION_STYLE_ASSIGNMENT((#280063)); +#280063 = SURFACE_STYLE_USAGE(.BOTH.,#280064); +#280064 = SURFACE_SIDE_STYLE('',(#280065,#280068)); +#280065 = SURFACE_STYLE_FILL_AREA(#280066); +#280066 = FILL_AREA_STYLE('',(#280067)); +#280067 = FILL_AREA_STYLE_COLOUR('',#272831); +#280068 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280069)); +#280069 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280070 = STYLED_ITEM('color',(#280071),#240696); +#280071 = PRESENTATION_STYLE_ASSIGNMENT((#280072)); +#280072 = SURFACE_STYLE_USAGE(.BOTH.,#280073); +#280073 = SURFACE_SIDE_STYLE('',(#280074,#280077)); +#280074 = SURFACE_STYLE_FILL_AREA(#280075); +#280075 = FILL_AREA_STYLE('',(#280076)); +#280076 = FILL_AREA_STYLE_COLOUR('',#272831); +#280077 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280078)); +#280078 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280079 = STYLED_ITEM('color',(#280080),#240806); +#280080 = PRESENTATION_STYLE_ASSIGNMENT((#280081)); +#280081 = SURFACE_STYLE_USAGE(.BOTH.,#280082); +#280082 = SURFACE_SIDE_STYLE('',(#280083,#280086)); +#280083 = SURFACE_STYLE_FILL_AREA(#280084); +#280084 = FILL_AREA_STYLE('',(#280085)); +#280085 = FILL_AREA_STYLE_COLOUR('',#272831); +#280086 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280087)); +#280087 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280088 = STYLED_ITEM('color',(#280089),#240874); +#280089 = PRESENTATION_STYLE_ASSIGNMENT((#280090)); +#280090 = SURFACE_STYLE_USAGE(.BOTH.,#280091); +#280091 = SURFACE_SIDE_STYLE('',(#280092,#280095)); +#280092 = SURFACE_STYLE_FILL_AREA(#280093); +#280093 = FILL_AREA_STYLE('',(#280094)); +#280094 = FILL_AREA_STYLE_COLOUR('',#272831); +#280095 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280096)); +#280096 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280097 = STYLED_ITEM('color',(#280098),#240943); +#280098 = PRESENTATION_STYLE_ASSIGNMENT((#280099)); +#280099 = SURFACE_STYLE_USAGE(.BOTH.,#280100); +#280100 = SURFACE_SIDE_STYLE('',(#280101,#280104)); +#280101 = SURFACE_STYLE_FILL_AREA(#280102); +#280102 = FILL_AREA_STYLE('',(#280103)); +#280103 = FILL_AREA_STYLE_COLOUR('',#272831); +#280104 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280105)); +#280105 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280106 = STYLED_ITEM('color',(#280107),#241121); +#280107 = PRESENTATION_STYLE_ASSIGNMENT((#280108)); +#280108 = SURFACE_STYLE_USAGE(.BOTH.,#280109); +#280109 = SURFACE_SIDE_STYLE('',(#280110,#280113)); +#280110 = SURFACE_STYLE_FILL_AREA(#280111); +#280111 = FILL_AREA_STYLE('',(#280112)); +#280112 = FILL_AREA_STYLE_COLOUR('',#272831); +#280113 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280114)); +#280114 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280115 = STYLED_ITEM('color',(#280116),#241165); +#280116 = PRESENTATION_STYLE_ASSIGNMENT((#280117)); +#280117 = SURFACE_STYLE_USAGE(.BOTH.,#280118); +#280118 = SURFACE_SIDE_STYLE('',(#280119,#280122)); +#280119 = SURFACE_STYLE_FILL_AREA(#280120); +#280120 = FILL_AREA_STYLE('',(#280121)); +#280121 = FILL_AREA_STYLE_COLOUR('',#272831); +#280122 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280123)); +#280123 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280124 = STYLED_ITEM('color',(#280125),#241209); +#280125 = PRESENTATION_STYLE_ASSIGNMENT((#280126)); +#280126 = SURFACE_STYLE_USAGE(.BOTH.,#280127); +#280127 = SURFACE_SIDE_STYLE('',(#280128,#280131)); +#280128 = SURFACE_STYLE_FILL_AREA(#280129); +#280129 = FILL_AREA_STYLE('',(#280130)); +#280130 = FILL_AREA_STYLE_COLOUR('',#272831); +#280131 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280132)); +#280132 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280133 = STYLED_ITEM('color',(#280134),#241539); +#280134 = PRESENTATION_STYLE_ASSIGNMENT((#280135)); +#280135 = SURFACE_STYLE_USAGE(.BOTH.,#280136); +#280136 = SURFACE_SIDE_STYLE('',(#280137,#280140)); +#280137 = SURFACE_STYLE_FILL_AREA(#280138); +#280138 = FILL_AREA_STYLE('',(#280139)); +#280139 = FILL_AREA_STYLE_COLOUR('',#272831); +#280140 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280141)); +#280141 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280142 = STYLED_ITEM('color',(#280143),#241681); +#280143 = PRESENTATION_STYLE_ASSIGNMENT((#280144)); +#280144 = SURFACE_STYLE_USAGE(.BOTH.,#280145); +#280145 = SURFACE_SIDE_STYLE('',(#280146,#280149)); +#280146 = SURFACE_STYLE_FILL_AREA(#280147); +#280147 = FILL_AREA_STYLE('',(#280148)); +#280148 = FILL_AREA_STYLE_COLOUR('',#272831); +#280149 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280150)); +#280150 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280151 = STYLED_ITEM('color',(#280152),#241893); +#280152 = PRESENTATION_STYLE_ASSIGNMENT((#280153)); +#280153 = SURFACE_STYLE_USAGE(.BOTH.,#280154); +#280154 = SURFACE_SIDE_STYLE('',(#280155,#280158)); +#280155 = SURFACE_STYLE_FILL_AREA(#280156); +#280156 = FILL_AREA_STYLE('',(#280157)); +#280157 = FILL_AREA_STYLE_COLOUR('',#272831); +#280158 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280159)); +#280159 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280160 = STYLED_ITEM('color',(#280161),#242035); +#280161 = PRESENTATION_STYLE_ASSIGNMENT((#280162)); +#280162 = SURFACE_STYLE_USAGE(.BOTH.,#280163); +#280163 = SURFACE_SIDE_STYLE('',(#280164,#280167)); +#280164 = SURFACE_STYLE_FILL_AREA(#280165); +#280165 = FILL_AREA_STYLE('',(#280166)); +#280166 = FILL_AREA_STYLE_COLOUR('',#272831); +#280167 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280168)); +#280168 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280169 = STYLED_ITEM('color',(#280170),#242177); +#280170 = PRESENTATION_STYLE_ASSIGNMENT((#280171)); +#280171 = SURFACE_STYLE_USAGE(.BOTH.,#280172); +#280172 = SURFACE_SIDE_STYLE('',(#280173,#280176)); +#280173 = SURFACE_STYLE_FILL_AREA(#280174); +#280174 = FILL_AREA_STYLE('',(#280175)); +#280175 = FILL_AREA_STYLE_COLOUR('',#272831); +#280176 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280177)); +#280177 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280178 = STYLED_ITEM('color',(#280179),#242370); +#280179 = PRESENTATION_STYLE_ASSIGNMENT((#280180)); +#280180 = SURFACE_STYLE_USAGE(.BOTH.,#280181); +#280181 = SURFACE_SIDE_STYLE('',(#280182,#280185)); +#280182 = SURFACE_STYLE_FILL_AREA(#280183); +#280183 = FILL_AREA_STYLE('',(#280184)); +#280184 = FILL_AREA_STYLE_COLOUR('',#272831); +#280185 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280186)); +#280186 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280187 = STYLED_ITEM('color',(#280188),#242464); +#280188 = PRESENTATION_STYLE_ASSIGNMENT((#280189)); +#280189 = SURFACE_STYLE_USAGE(.BOTH.,#280190); +#280190 = SURFACE_SIDE_STYLE('',(#280191,#280194)); +#280191 = SURFACE_STYLE_FILL_AREA(#280192); +#280192 = FILL_AREA_STYLE('',(#280193)); +#280193 = FILL_AREA_STYLE_COLOUR('',#272831); +#280194 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280195)); +#280195 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280196 = STYLED_ITEM('color',(#280197),#242549); +#280197 = PRESENTATION_STYLE_ASSIGNMENT((#280198)); +#280198 = SURFACE_STYLE_USAGE(.BOTH.,#280199); +#280199 = SURFACE_SIDE_STYLE('',(#280200,#280203)); +#280200 = SURFACE_STYLE_FILL_AREA(#280201); +#280201 = FILL_AREA_STYLE('',(#280202)); +#280202 = FILL_AREA_STYLE_COLOUR('',#272831); +#280203 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280204)); +#280204 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280205 = STYLED_ITEM('color',(#280206),#242742); +#280206 = PRESENTATION_STYLE_ASSIGNMENT((#280207)); +#280207 = SURFACE_STYLE_USAGE(.BOTH.,#280208); +#280208 = SURFACE_SIDE_STYLE('',(#280209,#280212)); +#280209 = SURFACE_STYLE_FILL_AREA(#280210); +#280210 = FILL_AREA_STYLE('',(#280211)); +#280211 = FILL_AREA_STYLE_COLOUR('',#272831); +#280212 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280213)); +#280213 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280214 = STYLED_ITEM('color',(#280215),#242936); +#280215 = PRESENTATION_STYLE_ASSIGNMENT((#280216)); +#280216 = SURFACE_STYLE_USAGE(.BOTH.,#280217); +#280217 = SURFACE_SIDE_STYLE('',(#280218,#280221)); +#280218 = SURFACE_STYLE_FILL_AREA(#280219); +#280219 = FILL_AREA_STYLE('',(#280220)); +#280220 = FILL_AREA_STYLE_COLOUR('',#272831); +#280221 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280222)); +#280222 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280223 = STYLED_ITEM('color',(#280224),#243087); +#280224 = PRESENTATION_STYLE_ASSIGNMENT((#280225)); +#280225 = SURFACE_STYLE_USAGE(.BOTH.,#280226); +#280226 = SURFACE_SIDE_STYLE('',(#280227,#280230)); +#280227 = SURFACE_STYLE_FILL_AREA(#280228); +#280228 = FILL_AREA_STYLE('',(#280229)); +#280229 = FILL_AREA_STYLE_COLOUR('',#272831); +#280230 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280231)); +#280231 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280232 = STYLED_ITEM('color',(#280233),#243213); +#280233 = PRESENTATION_STYLE_ASSIGNMENT((#280234)); +#280234 = SURFACE_STYLE_USAGE(.BOTH.,#280235); +#280235 = SURFACE_SIDE_STYLE('',(#280236,#280239)); +#280236 = SURFACE_STYLE_FILL_AREA(#280237); +#280237 = FILL_AREA_STYLE('',(#280238)); +#280238 = FILL_AREA_STYLE_COLOUR('',#272831); +#280239 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280240)); +#280240 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280241 = STYLED_ITEM('color',(#280242),#243380); +#280242 = PRESENTATION_STYLE_ASSIGNMENT((#280243)); +#280243 = SURFACE_STYLE_USAGE(.BOTH.,#280244); +#280244 = SURFACE_SIDE_STYLE('',(#280245,#280248)); +#280245 = SURFACE_STYLE_FILL_AREA(#280246); +#280246 = FILL_AREA_STYLE('',(#280247)); +#280247 = FILL_AREA_STYLE_COLOUR('',#272831); +#280248 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280249)); +#280249 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280250 = STYLED_ITEM('color',(#280251),#243524); +#280251 = PRESENTATION_STYLE_ASSIGNMENT((#280252)); +#280252 = SURFACE_STYLE_USAGE(.BOTH.,#280253); +#280253 = SURFACE_SIDE_STYLE('',(#280254,#280257)); +#280254 = SURFACE_STYLE_FILL_AREA(#280255); +#280255 = FILL_AREA_STYLE('',(#280256)); +#280256 = FILL_AREA_STYLE_COLOUR('',#272831); +#280257 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280258)); +#280258 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280259 = STYLED_ITEM('color',(#280260),#243972); +#280260 = PRESENTATION_STYLE_ASSIGNMENT((#280261)); +#280261 = SURFACE_STYLE_USAGE(.BOTH.,#280262); +#280262 = SURFACE_SIDE_STYLE('',(#280263,#280266)); +#280263 = SURFACE_STYLE_FILL_AREA(#280264); +#280264 = FILL_AREA_STYLE('',(#280265)); +#280265 = FILL_AREA_STYLE_COLOUR('',#272831); +#280266 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280267)); +#280267 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280268 = STYLED_ITEM('color',(#280269),#244453); +#280269 = PRESENTATION_STYLE_ASSIGNMENT((#280270)); +#280270 = SURFACE_STYLE_USAGE(.BOTH.,#280271); +#280271 = SURFACE_SIDE_STYLE('',(#280272,#280275)); +#280272 = SURFACE_STYLE_FILL_AREA(#280273); +#280273 = FILL_AREA_STYLE('',(#280274)); +#280274 = FILL_AREA_STYLE_COLOUR('',#272831); +#280275 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280276)); +#280276 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280277 = STYLED_ITEM('color',(#280278),#244901); +#280278 = PRESENTATION_STYLE_ASSIGNMENT((#280279)); +#280279 = SURFACE_STYLE_USAGE(.BOTH.,#280280); +#280280 = SURFACE_SIDE_STYLE('',(#280281,#280284)); +#280281 = SURFACE_STYLE_FILL_AREA(#280282); +#280282 = FILL_AREA_STYLE('',(#280283)); +#280283 = FILL_AREA_STYLE_COLOUR('',#272831); +#280284 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280285)); +#280285 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280286 = STYLED_ITEM('color',(#280287),#245349); +#280287 = PRESENTATION_STYLE_ASSIGNMENT((#280288)); +#280288 = SURFACE_STYLE_USAGE(.BOTH.,#280289); +#280289 = SURFACE_SIDE_STYLE('',(#280290,#280293)); +#280290 = SURFACE_STYLE_FILL_AREA(#280291); +#280291 = FILL_AREA_STYLE('',(#280292)); +#280292 = FILL_AREA_STYLE_COLOUR('',#272831); +#280293 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280294)); +#280294 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280295 = STYLED_ITEM('color',(#280296),#245500); +#280296 = PRESENTATION_STYLE_ASSIGNMENT((#280297)); +#280297 = SURFACE_STYLE_USAGE(.BOTH.,#280298); +#280298 = SURFACE_SIDE_STYLE('',(#280299,#280302)); +#280299 = SURFACE_STYLE_FILL_AREA(#280300); +#280300 = FILL_AREA_STYLE('',(#280301)); +#280301 = FILL_AREA_STYLE_COLOUR('',#272831); +#280302 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280303)); +#280303 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280304 = STYLED_ITEM('color',(#280305),#245626); +#280305 = PRESENTATION_STYLE_ASSIGNMENT((#280306)); +#280306 = SURFACE_STYLE_USAGE(.BOTH.,#280307); +#280307 = SURFACE_SIDE_STYLE('',(#280308,#280311)); +#280308 = SURFACE_STYLE_FILL_AREA(#280309); +#280309 = FILL_AREA_STYLE('',(#280310)); +#280310 = FILL_AREA_STYLE_COLOUR('',#272831); +#280311 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280312)); +#280312 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280313 = STYLED_ITEM('color',(#280314),#245768); +#280314 = PRESENTATION_STYLE_ASSIGNMENT((#280315)); +#280315 = SURFACE_STYLE_USAGE(.BOTH.,#280316); +#280316 = SURFACE_SIDE_STYLE('',(#280317,#280320)); +#280317 = SURFACE_STYLE_FILL_AREA(#280318); +#280318 = FILL_AREA_STYLE('',(#280319)); +#280319 = FILL_AREA_STYLE_COLOUR('',#272831); +#280320 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280321)); +#280321 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280322 = STYLED_ITEM('color',(#280323),#245925); +#280323 = PRESENTATION_STYLE_ASSIGNMENT((#280324)); +#280324 = SURFACE_STYLE_USAGE(.BOTH.,#280325); +#280325 = SURFACE_SIDE_STYLE('',(#280326,#280329)); +#280326 = SURFACE_STYLE_FILL_AREA(#280327); +#280327 = FILL_AREA_STYLE('',(#280328)); +#280328 = FILL_AREA_STYLE_COLOUR('',#272831); +#280329 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280330)); +#280330 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280331 = STYLED_ITEM('color',(#280332),#246087); +#280332 = PRESENTATION_STYLE_ASSIGNMENT((#280333)); +#280333 = SURFACE_STYLE_USAGE(.BOTH.,#280334); +#280334 = SURFACE_SIDE_STYLE('',(#280335,#280338)); +#280335 = SURFACE_STYLE_FILL_AREA(#280336); +#280336 = FILL_AREA_STYLE('',(#280337)); +#280337 = FILL_AREA_STYLE_COLOUR('',#272831); +#280338 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280339)); +#280339 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280340 = STYLED_ITEM('color',(#280341),#246139); +#280341 = PRESENTATION_STYLE_ASSIGNMENT((#280342)); +#280342 = SURFACE_STYLE_USAGE(.BOTH.,#280343); +#280343 = SURFACE_SIDE_STYLE('',(#280344,#280347)); +#280344 = SURFACE_STYLE_FILL_AREA(#280345); +#280345 = FILL_AREA_STYLE('',(#280346)); +#280346 = FILL_AREA_STYLE_COLOUR('',#272831); +#280347 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280348)); +#280348 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280349 = STYLED_ITEM('color',(#280350),#246191); +#280350 = PRESENTATION_STYLE_ASSIGNMENT((#280351)); +#280351 = SURFACE_STYLE_USAGE(.BOTH.,#280352); +#280352 = SURFACE_SIDE_STYLE('',(#280353,#280356)); +#280353 = SURFACE_STYLE_FILL_AREA(#280354); +#280354 = FILL_AREA_STYLE('',(#280355)); +#280355 = FILL_AREA_STYLE_COLOUR('',#272831); +#280356 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280357)); +#280357 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280358 = STYLED_ITEM('color',(#280359),#246235); +#280359 = PRESENTATION_STYLE_ASSIGNMENT((#280360)); +#280360 = SURFACE_STYLE_USAGE(.BOTH.,#280361); +#280361 = SURFACE_SIDE_STYLE('',(#280362,#280365)); +#280362 = SURFACE_STYLE_FILL_AREA(#280363); +#280363 = FILL_AREA_STYLE('',(#280364)); +#280364 = FILL_AREA_STYLE_COLOUR('',#272831); +#280365 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280366)); +#280366 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280367 = STYLED_ITEM('color',(#280368),#246279); +#280368 = PRESENTATION_STYLE_ASSIGNMENT((#280369)); +#280369 = SURFACE_STYLE_USAGE(.BOTH.,#280370); +#280370 = SURFACE_SIDE_STYLE('',(#280371,#280374)); +#280371 = SURFACE_STYLE_FILL_AREA(#280372); +#280372 = FILL_AREA_STYLE('',(#280373)); +#280373 = FILL_AREA_STYLE_COLOUR('',#272831); +#280374 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280375)); +#280375 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280376 = STYLED_ITEM('color',(#280377),#246323); +#280377 = PRESENTATION_STYLE_ASSIGNMENT((#280378)); +#280378 = SURFACE_STYLE_USAGE(.BOTH.,#280379); +#280379 = SURFACE_SIDE_STYLE('',(#280380,#280383)); +#280380 = SURFACE_STYLE_FILL_AREA(#280381); +#280381 = FILL_AREA_STYLE('',(#280382)); +#280382 = FILL_AREA_STYLE_COLOUR('',#272831); +#280383 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280384)); +#280384 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280385 = STYLED_ITEM('color',(#280386),#246367); +#280386 = PRESENTATION_STYLE_ASSIGNMENT((#280387)); +#280387 = SURFACE_STYLE_USAGE(.BOTH.,#280388); +#280388 = SURFACE_SIDE_STYLE('',(#280389,#280392)); +#280389 = SURFACE_STYLE_FILL_AREA(#280390); +#280390 = FILL_AREA_STYLE('',(#280391)); +#280391 = FILL_AREA_STYLE_COLOUR('',#272831); +#280392 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280393)); +#280393 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280394 = STYLED_ITEM('color',(#280395),#246576); +#280395 = PRESENTATION_STYLE_ASSIGNMENT((#280396)); +#280396 = SURFACE_STYLE_USAGE(.BOTH.,#280397); +#280397 = SURFACE_SIDE_STYLE('',(#280398,#280401)); +#280398 = SURFACE_STYLE_FILL_AREA(#280399); +#280399 = FILL_AREA_STYLE('',(#280400)); +#280400 = FILL_AREA_STYLE_COLOUR('',#272831); +#280401 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280402)); +#280402 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280403 = STYLED_ITEM('color',(#280404),#246620); +#280404 = PRESENTATION_STYLE_ASSIGNMENT((#280405)); +#280405 = SURFACE_STYLE_USAGE(.BOTH.,#280406); +#280406 = SURFACE_SIDE_STYLE('',(#280407,#280410)); +#280407 = SURFACE_STYLE_FILL_AREA(#280408); +#280408 = FILL_AREA_STYLE('',(#280409)); +#280409 = FILL_AREA_STYLE_COLOUR('',#272831); +#280410 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280411)); +#280411 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280412 = STYLED_ITEM('color',(#280413),#246664); +#280413 = PRESENTATION_STYLE_ASSIGNMENT((#280414)); +#280414 = SURFACE_STYLE_USAGE(.BOTH.,#280415); +#280415 = SURFACE_SIDE_STYLE('',(#280416,#280419)); +#280416 = SURFACE_STYLE_FILL_AREA(#280417); +#280417 = FILL_AREA_STYLE('',(#280418)); +#280418 = FILL_AREA_STYLE_COLOUR('',#272831); +#280419 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280420)); +#280420 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280421 = STYLED_ITEM('color',(#280422),#246708); +#280422 = PRESENTATION_STYLE_ASSIGNMENT((#280423)); +#280423 = SURFACE_STYLE_USAGE(.BOTH.,#280424); +#280424 = SURFACE_SIDE_STYLE('',(#280425,#280428)); +#280425 = SURFACE_STYLE_FILL_AREA(#280426); +#280426 = FILL_AREA_STYLE('',(#280427)); +#280427 = FILL_AREA_STYLE_COLOUR('',#272831); +#280428 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280429)); +#280429 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280430 = STYLED_ITEM('color',(#280431),#246752); +#280431 = PRESENTATION_STYLE_ASSIGNMENT((#280432)); +#280432 = SURFACE_STYLE_USAGE(.BOTH.,#280433); +#280433 = SURFACE_SIDE_STYLE('',(#280434,#280437)); +#280434 = SURFACE_STYLE_FILL_AREA(#280435); +#280435 = FILL_AREA_STYLE('',(#280436)); +#280436 = FILL_AREA_STYLE_COLOUR('',#272831); +#280437 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280438)); +#280438 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280439 = STYLED_ITEM('color',(#280440),#246796); +#280440 = PRESENTATION_STYLE_ASSIGNMENT((#280441)); +#280441 = SURFACE_STYLE_USAGE(.BOTH.,#280442); +#280442 = SURFACE_SIDE_STYLE('',(#280443,#280446)); +#280443 = SURFACE_STYLE_FILL_AREA(#280444); +#280444 = FILL_AREA_STYLE('',(#280445)); +#280445 = FILL_AREA_STYLE_COLOUR('',#272831); +#280446 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280447)); +#280447 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280448 = STYLED_ITEM('color',(#280449),#246938); +#280449 = PRESENTATION_STYLE_ASSIGNMENT((#280450)); +#280450 = SURFACE_STYLE_USAGE(.BOTH.,#280451); +#280451 = SURFACE_SIDE_STYLE('',(#280452,#280455)); +#280452 = SURFACE_STYLE_FILL_AREA(#280453); +#280453 = FILL_AREA_STYLE('',(#280454)); +#280454 = FILL_AREA_STYLE_COLOUR('',#272831); +#280455 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280456)); +#280456 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280457 = STYLED_ITEM('color',(#280458),#247105); +#280458 = PRESENTATION_STYLE_ASSIGNMENT((#280459)); +#280459 = SURFACE_STYLE_USAGE(.BOTH.,#280460); +#280460 = SURFACE_SIDE_STYLE('',(#280461,#280464)); +#280461 = SURFACE_STYLE_FILL_AREA(#280462); +#280462 = FILL_AREA_STYLE('',(#280463)); +#280463 = FILL_AREA_STYLE_COLOUR('',#272831); +#280464 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280465)); +#280465 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280466 = STYLED_ITEM('color',(#280467),#247276); +#280467 = PRESENTATION_STYLE_ASSIGNMENT((#280468)); +#280468 = SURFACE_STYLE_USAGE(.BOTH.,#280469); +#280469 = SURFACE_SIDE_STYLE('',(#280470,#280473)); +#280470 = SURFACE_STYLE_FILL_AREA(#280471); +#280471 = FILL_AREA_STYLE('',(#280472)); +#280472 = FILL_AREA_STYLE_COLOUR('',#272831); +#280473 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280474)); +#280474 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280475 = STYLED_ITEM('color',(#280476),#247447); +#280476 = PRESENTATION_STYLE_ASSIGNMENT((#280477)); +#280477 = SURFACE_STYLE_USAGE(.BOTH.,#280478); +#280478 = SURFACE_SIDE_STYLE('',(#280479,#280482)); +#280479 = SURFACE_STYLE_FILL_AREA(#280480); +#280480 = FILL_AREA_STYLE('',(#280481)); +#280481 = FILL_AREA_STYLE_COLOUR('',#272831); +#280482 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280483)); +#280483 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280484 = STYLED_ITEM('color',(#280485),#247618); +#280485 = PRESENTATION_STYLE_ASSIGNMENT((#280486)); +#280486 = SURFACE_STYLE_USAGE(.BOTH.,#280487); +#280487 = SURFACE_SIDE_STYLE('',(#280488,#280491)); +#280488 = SURFACE_STYLE_FILL_AREA(#280489); +#280489 = FILL_AREA_STYLE('',(#280490)); +#280490 = FILL_AREA_STYLE_COLOUR('',#272831); +#280491 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280492)); +#280492 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280493 = STYLED_ITEM('color',(#280494),#247789); +#280494 = PRESENTATION_STYLE_ASSIGNMENT((#280495)); +#280495 = SURFACE_STYLE_USAGE(.BOTH.,#280496); +#280496 = SURFACE_SIDE_STYLE('',(#280497,#280500)); +#280497 = SURFACE_STYLE_FILL_AREA(#280498); +#280498 = FILL_AREA_STYLE('',(#280499)); +#280499 = FILL_AREA_STYLE_COLOUR('',#272831); +#280500 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280501)); +#280501 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280502 = STYLED_ITEM('color',(#280503),#248034); +#280503 = PRESENTATION_STYLE_ASSIGNMENT((#280504)); +#280504 = SURFACE_STYLE_USAGE(.BOTH.,#280505); +#280505 = SURFACE_SIDE_STYLE('',(#280506,#280509)); +#280506 = SURFACE_STYLE_FILL_AREA(#280507); +#280507 = FILL_AREA_STYLE('',(#280508)); +#280508 = FILL_AREA_STYLE_COLOUR('',#272831); +#280509 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280510)); +#280510 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280511 = STYLED_ITEM('color',(#280512),#248279); +#280512 = PRESENTATION_STYLE_ASSIGNMENT((#280513)); +#280513 = SURFACE_STYLE_USAGE(.BOTH.,#280514); +#280514 = SURFACE_SIDE_STYLE('',(#280515,#280518)); +#280515 = SURFACE_STYLE_FILL_AREA(#280516); +#280516 = FILL_AREA_STYLE('',(#280517)); +#280517 = FILL_AREA_STYLE_COLOUR('',#272831); +#280518 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280519)); +#280519 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280520 = STYLED_ITEM('color',(#280521),#248524); +#280521 = PRESENTATION_STYLE_ASSIGNMENT((#280522)); +#280522 = SURFACE_STYLE_USAGE(.BOTH.,#280523); +#280523 = SURFACE_SIDE_STYLE('',(#280524,#280527)); +#280524 = SURFACE_STYLE_FILL_AREA(#280525); +#280525 = FILL_AREA_STYLE('',(#280526)); +#280526 = FILL_AREA_STYLE_COLOUR('',#272831); +#280527 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280528)); +#280528 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280529 = STYLED_ITEM('color',(#280530),#248718); +#280530 = PRESENTATION_STYLE_ASSIGNMENT((#280531)); +#280531 = SURFACE_STYLE_USAGE(.BOTH.,#280532); +#280532 = SURFACE_SIDE_STYLE('',(#280533,#280536)); +#280533 = SURFACE_STYLE_FILL_AREA(#280534); +#280534 = FILL_AREA_STYLE('',(#280535)); +#280535 = FILL_AREA_STYLE_COLOUR('',#272831); +#280536 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280537)); +#280537 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280538 = STYLED_ITEM('color',(#280539),#248963); +#280539 = PRESENTATION_STYLE_ASSIGNMENT((#280540)); +#280540 = SURFACE_STYLE_USAGE(.BOTH.,#280541); +#280541 = SURFACE_SIDE_STYLE('',(#280542,#280545)); +#280542 = SURFACE_STYLE_FILL_AREA(#280543); +#280543 = FILL_AREA_STYLE('',(#280544)); +#280544 = FILL_AREA_STYLE_COLOUR('',#272831); +#280545 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280546)); +#280546 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280547 = STYLED_ITEM('color',(#280548),#249106); +#280548 = PRESENTATION_STYLE_ASSIGNMENT((#280549)); +#280549 = SURFACE_STYLE_USAGE(.BOTH.,#280550); +#280550 = SURFACE_SIDE_STYLE('',(#280551,#280554)); +#280551 = SURFACE_STYLE_FILL_AREA(#280552); +#280552 = FILL_AREA_STYLE('',(#280553)); +#280553 = FILL_AREA_STYLE_COLOUR('',#272831); +#280554 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280555)); +#280555 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280556 = STYLED_ITEM('color',(#280557),#249344); +#280557 = PRESENTATION_STYLE_ASSIGNMENT((#280558)); +#280558 = SURFACE_STYLE_USAGE(.BOTH.,#280559); +#280559 = SURFACE_SIDE_STYLE('',(#280560,#280563)); +#280560 = SURFACE_STYLE_FILL_AREA(#280561); +#280561 = FILL_AREA_STYLE('',(#280562)); +#280562 = FILL_AREA_STYLE_COLOUR('',#272831); +#280563 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280564)); +#280564 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280565 = STYLED_ITEM('color',(#280566),#249537); +#280566 = PRESENTATION_STYLE_ASSIGNMENT((#280567)); +#280567 = SURFACE_STYLE_USAGE(.BOTH.,#280568); +#280568 = SURFACE_SIDE_STYLE('',(#280569,#280572)); +#280569 = SURFACE_STYLE_FILL_AREA(#280570); +#280570 = FILL_AREA_STYLE('',(#280571)); +#280571 = FILL_AREA_STYLE_COLOUR('',#272831); +#280572 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280573)); +#280573 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280574 = STYLED_ITEM('color',(#280575),#249606); +#280575 = PRESENTATION_STYLE_ASSIGNMENT((#280576)); +#280576 = SURFACE_STYLE_USAGE(.BOTH.,#280577); +#280577 = SURFACE_SIDE_STYLE('',(#280578,#280581)); +#280578 = SURFACE_STYLE_FILL_AREA(#280579); +#280579 = FILL_AREA_STYLE('',(#280580)); +#280580 = FILL_AREA_STYLE_COLOUR('',#272831); +#280581 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280582)); +#280582 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280583 = STYLED_ITEM('color',(#280584),#249658); +#280584 = PRESENTATION_STYLE_ASSIGNMENT((#280585)); +#280585 = SURFACE_STYLE_USAGE(.BOTH.,#280586); +#280586 = SURFACE_SIDE_STYLE('',(#280587,#280590)); +#280587 = SURFACE_STYLE_FILL_AREA(#280588); +#280588 = FILL_AREA_STYLE('',(#280589)); +#280589 = FILL_AREA_STYLE_COLOUR('',#272831); +#280590 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280591)); +#280591 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280592 = STYLED_ITEM('color',(#280593),#249710); +#280593 = PRESENTATION_STYLE_ASSIGNMENT((#280594)); +#280594 = SURFACE_STYLE_USAGE(.BOTH.,#280595); +#280595 = SURFACE_SIDE_STYLE('',(#280596,#280599)); +#280596 = SURFACE_STYLE_FILL_AREA(#280597); +#280597 = FILL_AREA_STYLE('',(#280598)); +#280598 = FILL_AREA_STYLE_COLOUR('',#272831); +#280599 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280600)); +#280600 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280601 = STYLED_ITEM('color',(#280602),#249754); +#280602 = PRESENTATION_STYLE_ASSIGNMENT((#280603)); +#280603 = SURFACE_STYLE_USAGE(.BOTH.,#280604); +#280604 = SURFACE_SIDE_STYLE('',(#280605,#280608)); +#280605 = SURFACE_STYLE_FILL_AREA(#280606); +#280606 = FILL_AREA_STYLE('',(#280607)); +#280607 = FILL_AREA_STYLE_COLOUR('',#272831); +#280608 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280609)); +#280609 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280610 = STYLED_ITEM('color',(#280611),#249798); +#280611 = PRESENTATION_STYLE_ASSIGNMENT((#280612)); +#280612 = SURFACE_STYLE_USAGE(.BOTH.,#280613); +#280613 = SURFACE_SIDE_STYLE('',(#280614,#280617)); +#280614 = SURFACE_STYLE_FILL_AREA(#280615); +#280615 = FILL_AREA_STYLE('',(#280616)); +#280616 = FILL_AREA_STYLE_COLOUR('',#272831); +#280617 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280618)); +#280618 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280619 = STYLED_ITEM('color',(#280620),#249842); +#280620 = PRESENTATION_STYLE_ASSIGNMENT((#280621)); +#280621 = SURFACE_STYLE_USAGE(.BOTH.,#280622); +#280622 = SURFACE_SIDE_STYLE('',(#280623,#280626)); +#280623 = SURFACE_STYLE_FILL_AREA(#280624); +#280624 = FILL_AREA_STYLE('',(#280625)); +#280625 = FILL_AREA_STYLE_COLOUR('',#272831); +#280626 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280627)); +#280627 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280628 = STYLED_ITEM('color',(#280629),#250025); +#280629 = PRESENTATION_STYLE_ASSIGNMENT((#280630)); +#280630 = SURFACE_STYLE_USAGE(.BOTH.,#280631); +#280631 = SURFACE_SIDE_STYLE('',(#280632,#280635)); +#280632 = SURFACE_STYLE_FILL_AREA(#280633); +#280633 = FILL_AREA_STYLE('',(#280634)); +#280634 = FILL_AREA_STYLE_COLOUR('',#272831); +#280635 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280636)); +#280636 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280637 = STYLED_ITEM('color',(#280638),#250101); +#280638 = PRESENTATION_STYLE_ASSIGNMENT((#280639)); +#280639 = SURFACE_STYLE_USAGE(.BOTH.,#280640); +#280640 = SURFACE_SIDE_STYLE('',(#280641,#280644)); +#280641 = SURFACE_STYLE_FILL_AREA(#280642); +#280642 = FILL_AREA_STYLE('',(#280643)); +#280643 = FILL_AREA_STYLE_COLOUR('',#272831); +#280644 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280645)); +#280645 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280646 = STYLED_ITEM('color',(#280647),#250195); +#280647 = PRESENTATION_STYLE_ASSIGNMENT((#280648)); +#280648 = SURFACE_STYLE_USAGE(.BOTH.,#280649); +#280649 = SURFACE_SIDE_STYLE('',(#280650,#280653)); +#280650 = SURFACE_STYLE_FILL_AREA(#280651); +#280651 = FILL_AREA_STYLE('',(#280652)); +#280652 = FILL_AREA_STYLE_COLOUR('',#272831); +#280653 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280654)); +#280654 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280655 = STYLED_ITEM('color',(#280656),#250289); +#280656 = PRESENTATION_STYLE_ASSIGNMENT((#280657)); +#280657 = SURFACE_STYLE_USAGE(.BOTH.,#280658); +#280658 = SURFACE_SIDE_STYLE('',(#280659,#280662)); +#280659 = SURFACE_STYLE_FILL_AREA(#280660); +#280660 = FILL_AREA_STYLE('',(#280661)); +#280661 = FILL_AREA_STYLE_COLOUR('',#272831); +#280662 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280663)); +#280663 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280664 = STYLED_ITEM('color',(#280665),#250383); +#280665 = PRESENTATION_STYLE_ASSIGNMENT((#280666)); +#280666 = SURFACE_STYLE_USAGE(.BOTH.,#280667); +#280667 = SURFACE_SIDE_STYLE('',(#280668,#280671)); +#280668 = SURFACE_STYLE_FILL_AREA(#280669); +#280669 = FILL_AREA_STYLE('',(#280670)); +#280670 = FILL_AREA_STYLE_COLOUR('',#272831); +#280671 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280672)); +#280672 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280673 = STYLED_ITEM('color',(#280674),#250477); +#280674 = PRESENTATION_STYLE_ASSIGNMENT((#280675)); +#280675 = SURFACE_STYLE_USAGE(.BOTH.,#280676); +#280676 = SURFACE_SIDE_STYLE('',(#280677,#280680)); +#280677 = SURFACE_STYLE_FILL_AREA(#280678); +#280678 = FILL_AREA_STYLE('',(#280679)); +#280679 = FILL_AREA_STYLE_COLOUR('',#272831); +#280680 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280681)); +#280681 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280682 = STYLED_ITEM('color',(#280683),#250660); +#280683 = PRESENTATION_STYLE_ASSIGNMENT((#280684)); +#280684 = SURFACE_STYLE_USAGE(.BOTH.,#280685); +#280685 = SURFACE_SIDE_STYLE('',(#280686,#280689)); +#280686 = SURFACE_STYLE_FILL_AREA(#280687); +#280687 = FILL_AREA_STYLE('',(#280688)); +#280688 = FILL_AREA_STYLE_COLOUR('',#272831); +#280689 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280690)); +#280690 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280691 = STYLED_ITEM('color',(#280692),#250729); +#280692 = PRESENTATION_STYLE_ASSIGNMENT((#280693)); +#280693 = SURFACE_STYLE_USAGE(.BOTH.,#280694); +#280694 = SURFACE_SIDE_STYLE('',(#280695,#280698)); +#280695 = SURFACE_STYLE_FILL_AREA(#280696); +#280696 = FILL_AREA_STYLE('',(#280697)); +#280697 = FILL_AREA_STYLE_COLOUR('',#272831); +#280698 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280699)); +#280699 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280700 = STYLED_ITEM('color',(#280701),#250798); +#280701 = PRESENTATION_STYLE_ASSIGNMENT((#280702)); +#280702 = SURFACE_STYLE_USAGE(.BOTH.,#280703); +#280703 = SURFACE_SIDE_STYLE('',(#280704,#280707)); +#280704 = SURFACE_STYLE_FILL_AREA(#280705); +#280705 = FILL_AREA_STYLE('',(#280706)); +#280706 = FILL_AREA_STYLE_COLOUR('',#272831); +#280707 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280708)); +#280708 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280709 = STYLED_ITEM('color',(#280710),#250867); +#280710 = PRESENTATION_STYLE_ASSIGNMENT((#280711)); +#280711 = SURFACE_STYLE_USAGE(.BOTH.,#280712); +#280712 = SURFACE_SIDE_STYLE('',(#280713,#280716)); +#280713 = SURFACE_STYLE_FILL_AREA(#280714); +#280714 = FILL_AREA_STYLE('',(#280715)); +#280715 = FILL_AREA_STYLE_COLOUR('',#272831); +#280716 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280717)); +#280717 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280718 = STYLED_ITEM('color',(#280719),#250936); +#280719 = PRESENTATION_STYLE_ASSIGNMENT((#280720)); +#280720 = SURFACE_STYLE_USAGE(.BOTH.,#280721); +#280721 = SURFACE_SIDE_STYLE('',(#280722,#280725)); +#280722 = SURFACE_STYLE_FILL_AREA(#280723); +#280723 = FILL_AREA_STYLE('',(#280724)); +#280724 = FILL_AREA_STYLE_COLOUR('',#272831); +#280725 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280726)); +#280726 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280727 = STYLED_ITEM('color',(#280728),#250980); +#280728 = PRESENTATION_STYLE_ASSIGNMENT((#280729)); +#280729 = SURFACE_STYLE_USAGE(.BOTH.,#280730); +#280730 = SURFACE_SIDE_STYLE('',(#280731,#280734)); +#280731 = SURFACE_STYLE_FILL_AREA(#280732); +#280732 = FILL_AREA_STYLE('',(#280733)); +#280733 = FILL_AREA_STYLE_COLOUR('',#272831); +#280734 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280735)); +#280735 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280736 = STYLED_ITEM('color',(#280737),#251024); +#280737 = PRESENTATION_STYLE_ASSIGNMENT((#280738)); +#280738 = SURFACE_STYLE_USAGE(.BOTH.,#280739); +#280739 = SURFACE_SIDE_STYLE('',(#280740,#280743)); +#280740 = SURFACE_STYLE_FILL_AREA(#280741); +#280741 = FILL_AREA_STYLE('',(#280742)); +#280742 = FILL_AREA_STYLE_COLOUR('',#272831); +#280743 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280744)); +#280744 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280745 = STYLED_ITEM('color',(#280746),#251068); +#280746 = PRESENTATION_STYLE_ASSIGNMENT((#280747)); +#280747 = SURFACE_STYLE_USAGE(.BOTH.,#280748); +#280748 = SURFACE_SIDE_STYLE('',(#280749,#280752)); +#280749 = SURFACE_STYLE_FILL_AREA(#280750); +#280750 = FILL_AREA_STYLE('',(#280751)); +#280751 = FILL_AREA_STYLE_COLOUR('',#272831); +#280752 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280753)); +#280753 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280754 = STYLED_ITEM('color',(#280755),#251261); +#280755 = PRESENTATION_STYLE_ASSIGNMENT((#280756)); +#280756 = SURFACE_STYLE_USAGE(.BOTH.,#280757); +#280757 = SURFACE_SIDE_STYLE('',(#280758,#280761)); +#280758 = SURFACE_STYLE_FILL_AREA(#280759); +#280759 = FILL_AREA_STYLE('',(#280760)); +#280760 = FILL_AREA_STYLE_COLOUR('',#272831); +#280761 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280762)); +#280762 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280763 = STYLED_ITEM('color',(#280764),#251305); +#280764 = PRESENTATION_STYLE_ASSIGNMENT((#280765)); +#280765 = SURFACE_STYLE_USAGE(.BOTH.,#280766); +#280766 = SURFACE_SIDE_STYLE('',(#280767,#280770)); +#280767 = SURFACE_STYLE_FILL_AREA(#280768); +#280768 = FILL_AREA_STYLE('',(#280769)); +#280769 = FILL_AREA_STYLE_COLOUR('',#272831); +#280770 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280771)); +#280771 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280772 = STYLED_ITEM('color',(#280773),#251431); +#280773 = PRESENTATION_STYLE_ASSIGNMENT((#280774)); +#280774 = SURFACE_STYLE_USAGE(.BOTH.,#280775); +#280775 = SURFACE_SIDE_STYLE('',(#280776,#280779)); +#280776 = SURFACE_STYLE_FILL_AREA(#280777); +#280777 = FILL_AREA_STYLE('',(#280778)); +#280778 = FILL_AREA_STYLE_COLOUR('',#272831); +#280779 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280780)); +#280780 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280781 = STYLED_ITEM('color',(#280782),#251625); +#280782 = PRESENTATION_STYLE_ASSIGNMENT((#280783)); +#280783 = SURFACE_STYLE_USAGE(.BOTH.,#280784); +#280784 = SURFACE_SIDE_STYLE('',(#280785,#280788)); +#280785 = SURFACE_STYLE_FILL_AREA(#280786); +#280786 = FILL_AREA_STYLE('',(#280787)); +#280787 = FILL_AREA_STYLE_COLOUR('',#272831); +#280788 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280789)); +#280789 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280790 = STYLED_ITEM('color',(#280791),#251807); +#280791 = PRESENTATION_STYLE_ASSIGNMENT((#280792)); +#280792 = SURFACE_STYLE_USAGE(.BOTH.,#280793); +#280793 = SURFACE_SIDE_STYLE('',(#280794,#280797)); +#280794 = SURFACE_STYLE_FILL_AREA(#280795); +#280795 = FILL_AREA_STYLE('',(#280796)); +#280796 = FILL_AREA_STYLE_COLOUR('',#272831); +#280797 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280798)); +#280798 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280799 = STYLED_ITEM('color',(#280800),#251974); +#280800 = PRESENTATION_STYLE_ASSIGNMENT((#280801)); +#280801 = SURFACE_STYLE_USAGE(.BOTH.,#280802); +#280802 = SURFACE_SIDE_STYLE('',(#280803,#280806)); +#280803 = SURFACE_STYLE_FILL_AREA(#280804); +#280804 = FILL_AREA_STYLE('',(#280805)); +#280805 = FILL_AREA_STYLE_COLOUR('',#272831); +#280806 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280807)); +#280807 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280808 = STYLED_ITEM('color',(#280809),#252141); +#280809 = PRESENTATION_STYLE_ASSIGNMENT((#280810)); +#280810 = SURFACE_STYLE_USAGE(.BOTH.,#280811); +#280811 = SURFACE_SIDE_STYLE('',(#280812,#280815)); +#280812 = SURFACE_STYLE_FILL_AREA(#280813); +#280813 = FILL_AREA_STYLE('',(#280814)); +#280814 = FILL_AREA_STYLE_COLOUR('',#272831); +#280815 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280816)); +#280816 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280817 = STYLED_ITEM('color',(#280818),#252283); +#280818 = PRESENTATION_STYLE_ASSIGNMENT((#280819)); +#280819 = SURFACE_STYLE_USAGE(.BOTH.,#280820); +#280820 = SURFACE_SIDE_STYLE('',(#280821,#280824)); +#280821 = SURFACE_STYLE_FILL_AREA(#280822); +#280822 = FILL_AREA_STYLE('',(#280823)); +#280823 = FILL_AREA_STYLE_COLOUR('',#272831); +#280824 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280825)); +#280825 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280826 = STYLED_ITEM('color',(#280827),#252454); +#280827 = PRESENTATION_STYLE_ASSIGNMENT((#280828)); +#280828 = SURFACE_STYLE_USAGE(.BOTH.,#280829); +#280829 = SURFACE_SIDE_STYLE('',(#280830,#280833)); +#280830 = SURFACE_STYLE_FILL_AREA(#280831); +#280831 = FILL_AREA_STYLE('',(#280832)); +#280832 = FILL_AREA_STYLE_COLOUR('',#272831); +#280833 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280834)); +#280834 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280835 = STYLED_ITEM('color',(#280836),#252625); +#280836 = PRESENTATION_STYLE_ASSIGNMENT((#280837)); +#280837 = SURFACE_STYLE_USAGE(.BOTH.,#280838); +#280838 = SURFACE_SIDE_STYLE('',(#280839,#280842)); +#280839 = SURFACE_STYLE_FILL_AREA(#280840); +#280840 = FILL_AREA_STYLE('',(#280841)); +#280841 = FILL_AREA_STYLE_COLOUR('',#272831); +#280842 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280843)); +#280843 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280844 = STYLED_ITEM('color',(#280845),#252818); +#280845 = PRESENTATION_STYLE_ASSIGNMENT((#280846)); +#280846 = SURFACE_STYLE_USAGE(.BOTH.,#280847); +#280847 = SURFACE_SIDE_STYLE('',(#280848,#280851)); +#280848 = SURFACE_STYLE_FILL_AREA(#280849); +#280849 = FILL_AREA_STYLE('',(#280850)); +#280850 = FILL_AREA_STYLE_COLOUR('',#272831); +#280851 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280852)); +#280852 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280853 = STYLED_ITEM('color',(#280854),#253012); +#280854 = PRESENTATION_STYLE_ASSIGNMENT((#280855)); +#280855 = SURFACE_STYLE_USAGE(.BOTH.,#280856); +#280856 = SURFACE_SIDE_STYLE('',(#280857,#280860)); +#280857 = SURFACE_STYLE_FILL_AREA(#280858); +#280858 = FILL_AREA_STYLE('',(#280859)); +#280859 = FILL_AREA_STYLE_COLOUR('',#272831); +#280860 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280861)); +#280861 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280862 = STYLED_ITEM('color',(#280863),#253305); +#280863 = PRESENTATION_STYLE_ASSIGNMENT((#280864)); +#280864 = SURFACE_STYLE_USAGE(.BOTH.,#280865); +#280865 = SURFACE_SIDE_STYLE('',(#280866,#280869)); +#280866 = SURFACE_STYLE_FILL_AREA(#280867); +#280867 = FILL_AREA_STYLE('',(#280868)); +#280868 = FILL_AREA_STYLE_COLOUR('',#272831); +#280869 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280870)); +#280870 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280871 = STYLED_ITEM('color',(#280872),#253517); +#280872 = PRESENTATION_STYLE_ASSIGNMENT((#280873)); +#280873 = SURFACE_STYLE_USAGE(.BOTH.,#280874); +#280874 = SURFACE_SIDE_STYLE('',(#280875,#280878)); +#280875 = SURFACE_STYLE_FILL_AREA(#280876); +#280876 = FILL_AREA_STYLE('',(#280877)); +#280877 = FILL_AREA_STYLE_COLOUR('',#272831); +#280878 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280879)); +#280879 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280880 = STYLED_ITEM('color',(#280881),#253659); +#280881 = PRESENTATION_STYLE_ASSIGNMENT((#280882)); +#280882 = SURFACE_STYLE_USAGE(.BOTH.,#280883); +#280883 = SURFACE_SIDE_STYLE('',(#280884,#280887)); +#280884 = SURFACE_STYLE_FILL_AREA(#280885); +#280885 = FILL_AREA_STYLE('',(#280886)); +#280886 = FILL_AREA_STYLE_COLOUR('',#272831); +#280887 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280888)); +#280888 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280889 = STYLED_ITEM('color',(#280890),#253761); +#280890 = PRESENTATION_STYLE_ASSIGNMENT((#280891)); +#280891 = SURFACE_STYLE_USAGE(.BOTH.,#280892); +#280892 = SURFACE_SIDE_STYLE('',(#280893,#280896)); +#280893 = SURFACE_STYLE_FILL_AREA(#280894); +#280894 = FILL_AREA_STYLE('',(#280895)); +#280895 = FILL_AREA_STYLE_COLOUR('',#272831); +#280896 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280897)); +#280897 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280898 = STYLED_ITEM('color',(#280899),#253963); +#280899 = PRESENTATION_STYLE_ASSIGNMENT((#280900)); +#280900 = SURFACE_STYLE_USAGE(.BOTH.,#280901); +#280901 = SURFACE_SIDE_STYLE('',(#280902,#280905)); +#280902 = SURFACE_STYLE_FILL_AREA(#280903); +#280903 = FILL_AREA_STYLE('',(#280904)); +#280904 = FILL_AREA_STYLE_COLOUR('',#272831); +#280905 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280906)); +#280906 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280907 = STYLED_ITEM('color',(#280908),#254105); +#280908 = PRESENTATION_STYLE_ASSIGNMENT((#280909)); +#280909 = SURFACE_STYLE_USAGE(.BOTH.,#280910); +#280910 = SURFACE_SIDE_STYLE('',(#280911,#280914)); +#280911 = SURFACE_STYLE_FILL_AREA(#280912); +#280912 = FILL_AREA_STYLE('',(#280913)); +#280913 = FILL_AREA_STYLE_COLOUR('',#272831); +#280914 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280915)); +#280915 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280916 = STYLED_ITEM('color',(#280917),#254272); +#280917 = PRESENTATION_STYLE_ASSIGNMENT((#280918)); +#280918 = SURFACE_STYLE_USAGE(.BOTH.,#280919); +#280919 = SURFACE_SIDE_STYLE('',(#280920,#280923)); +#280920 = SURFACE_STYLE_FILL_AREA(#280921); +#280921 = FILL_AREA_STYLE('',(#280922)); +#280922 = FILL_AREA_STYLE_COLOUR('',#272831); +#280923 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280924)); +#280924 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280925 = STYLED_ITEM('color',(#280926),#254414); +#280926 = PRESENTATION_STYLE_ASSIGNMENT((#280927)); +#280927 = SURFACE_STYLE_USAGE(.BOTH.,#280928); +#280928 = SURFACE_SIDE_STYLE('',(#280929,#280932)); +#280929 = SURFACE_STYLE_FILL_AREA(#280930); +#280930 = FILL_AREA_STYLE('',(#280931)); +#280931 = FILL_AREA_STYLE_COLOUR('',#272831); +#280932 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280933)); +#280933 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280934 = STYLED_ITEM('color',(#280935),#254556); +#280935 = PRESENTATION_STYLE_ASSIGNMENT((#280936)); +#280936 = SURFACE_STYLE_USAGE(.BOTH.,#280937); +#280937 = SURFACE_SIDE_STYLE('',(#280938,#280941)); +#280938 = SURFACE_STYLE_FILL_AREA(#280939); +#280939 = FILL_AREA_STYLE('',(#280940)); +#280940 = FILL_AREA_STYLE_COLOUR('',#272831); +#280941 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280942)); +#280942 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280943 = STYLED_ITEM('color',(#280944),#254694); +#280944 = PRESENTATION_STYLE_ASSIGNMENT((#280945)); +#280945 = SURFACE_STYLE_USAGE(.BOTH.,#280946); +#280946 = SURFACE_SIDE_STYLE('',(#280947,#280950)); +#280947 = SURFACE_STYLE_FILL_AREA(#280948); +#280948 = FILL_AREA_STYLE('',(#280949)); +#280949 = FILL_AREA_STYLE_COLOUR('',#272831); +#280950 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280951)); +#280951 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280952 = STYLED_ITEM('color',(#280953),#254897); +#280953 = PRESENTATION_STYLE_ASSIGNMENT((#280954)); +#280954 = SURFACE_STYLE_USAGE(.BOTH.,#280955); +#280955 = SURFACE_SIDE_STYLE('',(#280956,#280959)); +#280956 = SURFACE_STYLE_FILL_AREA(#280957); +#280957 = FILL_AREA_STYLE('',(#280958)); +#280958 = FILL_AREA_STYLE_COLOUR('',#272831); +#280959 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280960)); +#280960 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280961 = STYLED_ITEM('color',(#280962),#255035); +#280962 = PRESENTATION_STYLE_ASSIGNMENT((#280963)); +#280963 = SURFACE_STYLE_USAGE(.BOTH.,#280964); +#280964 = SURFACE_SIDE_STYLE('',(#280965,#280968)); +#280965 = SURFACE_STYLE_FILL_AREA(#280966); +#280966 = FILL_AREA_STYLE('',(#280967)); +#280967 = FILL_AREA_STYLE_COLOUR('',#272831); +#280968 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280969)); +#280969 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280970 = STYLED_ITEM('color',(#280971),#255229); +#280971 = PRESENTATION_STYLE_ASSIGNMENT((#280972)); +#280972 = SURFACE_STYLE_USAGE(.BOTH.,#280973); +#280973 = SURFACE_SIDE_STYLE('',(#280974,#280977)); +#280974 = SURFACE_STYLE_FILL_AREA(#280975); +#280975 = FILL_AREA_STYLE('',(#280976)); +#280976 = FILL_AREA_STYLE_COLOUR('',#272831); +#280977 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280978)); +#280978 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280979 = STYLED_ITEM('color',(#280980),#255367); +#280980 = PRESENTATION_STYLE_ASSIGNMENT((#280981)); +#280981 = SURFACE_STYLE_USAGE(.BOTH.,#280982); +#280982 = SURFACE_SIDE_STYLE('',(#280983,#280986)); +#280983 = SURFACE_STYLE_FILL_AREA(#280984); +#280984 = FILL_AREA_STYLE('',(#280985)); +#280985 = FILL_AREA_STYLE_COLOUR('',#272831); +#280986 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280987)); +#280987 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280988 = STYLED_ITEM('color',(#280989),#255505); +#280989 = PRESENTATION_STYLE_ASSIGNMENT((#280990)); +#280990 = SURFACE_STYLE_USAGE(.BOTH.,#280991); +#280991 = SURFACE_SIDE_STYLE('',(#280992,#280995)); +#280992 = SURFACE_STYLE_FILL_AREA(#280993); +#280993 = FILL_AREA_STYLE('',(#280994)); +#280994 = FILL_AREA_STYLE_COLOUR('',#272831); +#280995 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#280996)); +#280996 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#280997 = STYLED_ITEM('color',(#280998),#255647); +#280998 = PRESENTATION_STYLE_ASSIGNMENT((#280999)); +#280999 = SURFACE_STYLE_USAGE(.BOTH.,#281000); +#281000 = SURFACE_SIDE_STYLE('',(#281001,#281004)); +#281001 = SURFACE_STYLE_FILL_AREA(#281002); +#281002 = FILL_AREA_STYLE('',(#281003)); +#281003 = FILL_AREA_STYLE_COLOUR('',#272831); +#281004 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281005)); +#281005 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281006 = STYLED_ITEM('color',(#281007),#255814); +#281007 = PRESENTATION_STYLE_ASSIGNMENT((#281008)); +#281008 = SURFACE_STYLE_USAGE(.BOTH.,#281009); +#281009 = SURFACE_SIDE_STYLE('',(#281010,#281013)); +#281010 = SURFACE_STYLE_FILL_AREA(#281011); +#281011 = FILL_AREA_STYLE('',(#281012)); +#281012 = FILL_AREA_STYLE_COLOUR('',#272831); +#281013 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281014)); +#281014 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281015 = STYLED_ITEM('color',(#281016),#256021); +#281016 = PRESENTATION_STYLE_ASSIGNMENT((#281017)); +#281017 = SURFACE_STYLE_USAGE(.BOTH.,#281018); +#281018 = SURFACE_SIDE_STYLE('',(#281019,#281022)); +#281019 = SURFACE_STYLE_FILL_AREA(#281020); +#281020 = FILL_AREA_STYLE('',(#281021)); +#281021 = FILL_AREA_STYLE_COLOUR('',#272831); +#281022 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281023)); +#281023 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281024 = STYLED_ITEM('color',(#281025),#256228); +#281025 = PRESENTATION_STYLE_ASSIGNMENT((#281026)); +#281026 = SURFACE_STYLE_USAGE(.BOTH.,#281027); +#281027 = SURFACE_SIDE_STYLE('',(#281028,#281031)); +#281028 = SURFACE_STYLE_FILL_AREA(#281029); +#281029 = FILL_AREA_STYLE('',(#281030)); +#281030 = FILL_AREA_STYLE_COLOUR('',#272831); +#281031 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281032)); +#281032 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281033 = STYLED_ITEM('color',(#281034),#256435); +#281034 = PRESENTATION_STYLE_ASSIGNMENT((#281035)); +#281035 = SURFACE_STYLE_USAGE(.BOTH.,#281036); +#281036 = SURFACE_SIDE_STYLE('',(#281037,#281040)); +#281037 = SURFACE_STYLE_FILL_AREA(#281038); +#281038 = FILL_AREA_STYLE('',(#281039)); +#281039 = FILL_AREA_STYLE_COLOUR('',#272831); +#281040 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281041)); +#281041 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281042 = STYLED_ITEM('color',(#281043),#256642); +#281043 = PRESENTATION_STYLE_ASSIGNMENT((#281044)); +#281044 = SURFACE_STYLE_USAGE(.BOTH.,#281045); +#281045 = SURFACE_SIDE_STYLE('',(#281046,#281049)); +#281046 = SURFACE_STYLE_FILL_AREA(#281047); +#281047 = FILL_AREA_STYLE('',(#281048)); +#281048 = FILL_AREA_STYLE_COLOUR('',#272831); +#281049 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281050)); +#281050 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281051 = STYLED_ITEM('color',(#281052),#256887); +#281052 = PRESENTATION_STYLE_ASSIGNMENT((#281053)); +#281053 = SURFACE_STYLE_USAGE(.BOTH.,#281054); +#281054 = SURFACE_SIDE_STYLE('',(#281055,#281058)); +#281055 = SURFACE_STYLE_FILL_AREA(#281056); +#281056 = FILL_AREA_STYLE('',(#281057)); +#281057 = FILL_AREA_STYLE_COLOUR('',#272831); +#281058 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281059)); +#281059 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281060 = STYLED_ITEM('color',(#281061),#257132); +#281061 = PRESENTATION_STYLE_ASSIGNMENT((#281062)); +#281062 = SURFACE_STYLE_USAGE(.BOTH.,#281063); +#281063 = SURFACE_SIDE_STYLE('',(#281064,#281067)); +#281064 = SURFACE_STYLE_FILL_AREA(#281065); +#281065 = FILL_AREA_STYLE('',(#281066)); +#281066 = FILL_AREA_STYLE_COLOUR('',#272831); +#281067 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281068)); +#281068 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281069 = STYLED_ITEM('color',(#281070),#257377); +#281070 = PRESENTATION_STYLE_ASSIGNMENT((#281071)); +#281071 = SURFACE_STYLE_USAGE(.BOTH.,#281072); +#281072 = SURFACE_SIDE_STYLE('',(#281073,#281076)); +#281073 = SURFACE_STYLE_FILL_AREA(#281074); +#281074 = FILL_AREA_STYLE('',(#281075)); +#281075 = FILL_AREA_STYLE_COLOUR('',#272831); +#281076 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281077)); +#281077 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281078 = STYLED_ITEM('color',(#281079),#257571); +#281079 = PRESENTATION_STYLE_ASSIGNMENT((#281080)); +#281080 = SURFACE_STYLE_USAGE(.BOTH.,#281081); +#281081 = SURFACE_SIDE_STYLE('',(#281082,#281085)); +#281082 = SURFACE_STYLE_FILL_AREA(#281083); +#281083 = FILL_AREA_STYLE('',(#281084)); +#281084 = FILL_AREA_STYLE_COLOUR('',#272831); +#281085 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281086)); +#281086 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281087 = STYLED_ITEM('color',(#281088),#257816); +#281088 = PRESENTATION_STYLE_ASSIGNMENT((#281089)); +#281089 = SURFACE_STYLE_USAGE(.BOTH.,#281090); +#281090 = SURFACE_SIDE_STYLE('',(#281091,#281094)); +#281091 = SURFACE_STYLE_FILL_AREA(#281092); +#281092 = FILL_AREA_STYLE('',(#281093)); +#281093 = FILL_AREA_STYLE_COLOUR('',#272831); +#281094 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#281095)); +#281095 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#281096 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #281097,#281108,#281116,#281123,#281130,#281137,#281144,#281151, + #281158,#281165,#281172,#281179,#281186,#281193,#281200,#281207, + #281214,#281221,#281228,#281235,#281242,#281249,#281256,#281263, + #281270,#281277,#281284,#281291,#281298,#281305,#281312,#281319, + #281326,#281333,#281340,#281347,#281354,#281361,#281368,#281375, + #281382,#281389,#281396,#281403,#281410,#281417,#281424,#281431, + #281438,#281445,#281452,#281459,#281466,#281473,#281480,#281487, + #281496,#281503,#281510,#281517,#281524,#281531,#281538,#281545, + #281552,#281559,#281566,#281573,#281580,#281587,#281594,#281601, + #281608,#281615,#281622,#281629,#281636,#281643,#281650,#281657, + #281664,#281671,#281678,#281685,#281692,#281699,#281706,#281713, + #281720,#281727,#281734,#281741,#281748,#281755,#281762,#281769, + #281776,#281783,#281790,#281797,#281804,#281811,#281818,#281825, + #281832,#281839,#281846,#281853,#281860,#281867,#281874,#281881, + #281888,#281895,#281902,#281909,#281916,#281923,#281930,#281937, + #281944,#281951,#281958,#281965,#281972,#281979,#281986,#281993, + #282000,#282007,#282014,#282021,#282028,#282035,#282042,#282049, + #282056,#282063,#282070,#282077,#282084,#282091,#282098,#282105, + #282112,#282119,#282126,#282133,#282140,#282147,#282154,#282161, + #282168,#282175,#282182,#282189,#282196,#282203,#282210,#282217, + #282224,#282231,#282238,#282245,#282252,#282259,#282266,#282273, + #282280,#282287,#282294,#282301,#282308,#282315,#282322,#282329, + #282336,#282343,#282350,#282357,#282364,#282371,#282378,#282385, + #282392,#282399,#282406,#282413,#282420,#282427,#282434,#282441, + #282450,#282457,#282464,#282471,#282478,#282485,#282492,#282499, + #282506,#282513,#282520,#282527,#282534,#282543,#282551,#282558, + #282565,#282572,#282579,#282586,#282593,#282600,#282607,#282614, + #282621,#282628,#282635,#282642,#282649,#282656,#282663,#282670, + #282679,#282686,#282693,#282700,#282707,#282714,#282721,#282728, + #282735,#282742,#282749,#282756),#65610); +#281097 = STYLED_ITEM('color',(#281098),#58710); +#281098 = PRESENTATION_STYLE_ASSIGNMENT((#281099,#281105)); +#281099 = SURFACE_STYLE_USAGE(.BOTH.,#281100); +#281100 = SURFACE_SIDE_STYLE('',(#281101)); +#281101 = SURFACE_STYLE_FILL_AREA(#281102); +#281102 = FILL_AREA_STYLE('',(#281103)); +#281103 = FILL_AREA_STYLE_COLOUR('',#281104); +#281104 = COLOUR_RGB('',0.800000010877,0.800000010877,0.800000010877); +#281105 = CURVE_STYLE('',#281106,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#281106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281107 = COLOUR_RGB('',9.803921802644E-02,9.803921802644E-02, + 9.803921802644E-02); +#281108 = OVER_RIDING_STYLED_ITEM('overriding color',(#281109),#58712, + #281097); +#281109 = PRESENTATION_STYLE_ASSIGNMENT((#281110)); +#281110 = SURFACE_STYLE_USAGE(.BOTH.,#281111); +#281111 = SURFACE_SIDE_STYLE('',(#281112)); +#281112 = SURFACE_STYLE_FILL_AREA(#281113); +#281113 = FILL_AREA_STYLE('',(#281114)); +#281114 = FILL_AREA_STYLE_COLOUR('',#281115); +#281115 = COLOUR_RGB('',0.272999999305,0.272999999305,0.272999999305); +#281116 = OVER_RIDING_STYLED_ITEM('overriding color',(#281117),#58988, + #281097); +#281117 = PRESENTATION_STYLE_ASSIGNMENT((#281118)); +#281118 = SURFACE_STYLE_USAGE(.BOTH.,#281119); +#281119 = SURFACE_SIDE_STYLE('',(#281120)); +#281120 = SURFACE_STYLE_FILL_AREA(#281121); +#281121 = FILL_AREA_STYLE('',(#281122)); +#281122 = FILL_AREA_STYLE_COLOUR('',#281115); +#281123 = OVER_RIDING_STYLED_ITEM('overriding color',(#281124),#59019, + #281097); +#281124 = PRESENTATION_STYLE_ASSIGNMENT((#281125)); +#281125 = SURFACE_STYLE_USAGE(.BOTH.,#281126); +#281126 = SURFACE_SIDE_STYLE('',(#281127)); +#281127 = SURFACE_STYLE_FILL_AREA(#281128); +#281128 = FILL_AREA_STYLE('',(#281129)); +#281129 = FILL_AREA_STYLE_COLOUR('',#281115); +#281130 = OVER_RIDING_STYLED_ITEM('overriding color',(#281131),#59044, + #281097); +#281131 = PRESENTATION_STYLE_ASSIGNMENT((#281132)); +#281132 = SURFACE_STYLE_USAGE(.BOTH.,#281133); +#281133 = SURFACE_SIDE_STYLE('',(#281134)); +#281134 = SURFACE_STYLE_FILL_AREA(#281135); +#281135 = FILL_AREA_STYLE('',(#281136)); +#281136 = FILL_AREA_STYLE_COLOUR('',#281115); +#281137 = OVER_RIDING_STYLED_ITEM('overriding color',(#281138),#59121, + #281097); +#281138 = PRESENTATION_STYLE_ASSIGNMENT((#281139)); +#281139 = SURFACE_STYLE_USAGE(.BOTH.,#281140); +#281140 = SURFACE_SIDE_STYLE('',(#281141)); +#281141 = SURFACE_STYLE_FILL_AREA(#281142); +#281142 = FILL_AREA_STYLE('',(#281143)); +#281143 = FILL_AREA_STYLE_COLOUR('',#281115); +#281144 = OVER_RIDING_STYLED_ITEM('overriding color',(#281145),#59145, + #281097); +#281145 = PRESENTATION_STYLE_ASSIGNMENT((#281146)); +#281146 = SURFACE_STYLE_USAGE(.BOTH.,#281147); +#281147 = SURFACE_SIDE_STYLE('',(#281148)); +#281148 = SURFACE_STYLE_FILL_AREA(#281149); +#281149 = FILL_AREA_STYLE('',(#281150)); +#281150 = FILL_AREA_STYLE_COLOUR('',#281115); +#281151 = OVER_RIDING_STYLED_ITEM('overriding color',(#281152),#59170, + #281097); +#281152 = PRESENTATION_STYLE_ASSIGNMENT((#281153)); +#281153 = SURFACE_STYLE_USAGE(.BOTH.,#281154); +#281154 = SURFACE_SIDE_STYLE('',(#281155)); +#281155 = SURFACE_STYLE_FILL_AREA(#281156); +#281156 = FILL_AREA_STYLE('',(#281157)); +#281157 = FILL_AREA_STYLE_COLOUR('',#281115); +#281158 = OVER_RIDING_STYLED_ITEM('overriding color',(#281159),#59195, + #281097); +#281159 = PRESENTATION_STYLE_ASSIGNMENT((#281160)); +#281160 = SURFACE_STYLE_USAGE(.BOTH.,#281161); +#281161 = SURFACE_SIDE_STYLE('',(#281162)); +#281162 = SURFACE_STYLE_FILL_AREA(#281163); +#281163 = FILL_AREA_STYLE('',(#281164)); +#281164 = FILL_AREA_STYLE_COLOUR('',#281115); +#281165 = OVER_RIDING_STYLED_ITEM('overriding color',(#281166),#59251, + #281097); +#281166 = PRESENTATION_STYLE_ASSIGNMENT((#281167)); +#281167 = SURFACE_STYLE_USAGE(.BOTH.,#281168); +#281168 = SURFACE_SIDE_STYLE('',(#281169)); +#281169 = SURFACE_STYLE_FILL_AREA(#281170); +#281170 = FILL_AREA_STYLE('',(#281171)); +#281171 = FILL_AREA_STYLE_COLOUR('',#281115); +#281172 = OVER_RIDING_STYLED_ITEM('overriding color',(#281173),#59275, + #281097); +#281173 = PRESENTATION_STYLE_ASSIGNMENT((#281174)); +#281174 = SURFACE_STYLE_USAGE(.BOTH.,#281175); +#281175 = SURFACE_SIDE_STYLE('',(#281176)); +#281176 = SURFACE_STYLE_FILL_AREA(#281177); +#281177 = FILL_AREA_STYLE('',(#281178)); +#281178 = FILL_AREA_STYLE_COLOUR('',#281115); +#281179 = OVER_RIDING_STYLED_ITEM('overriding color',(#281180),#59300, + #281097); +#281180 = PRESENTATION_STYLE_ASSIGNMENT((#281181)); +#281181 = SURFACE_STYLE_USAGE(.BOTH.,#281182); +#281182 = SURFACE_SIDE_STYLE('',(#281183)); +#281183 = SURFACE_STYLE_FILL_AREA(#281184); +#281184 = FILL_AREA_STYLE('',(#281185)); +#281185 = FILL_AREA_STYLE_COLOUR('',#281115); +#281186 = OVER_RIDING_STYLED_ITEM('overriding color',(#281187),#59370, + #281097); +#281187 = PRESENTATION_STYLE_ASSIGNMENT((#281188)); +#281188 = SURFACE_STYLE_USAGE(.BOTH.,#281189); +#281189 = SURFACE_SIDE_STYLE('',(#281190)); +#281190 = SURFACE_STYLE_FILL_AREA(#281191); +#281191 = FILL_AREA_STYLE('',(#281192)); +#281192 = FILL_AREA_STYLE_COLOUR('',#281115); +#281193 = OVER_RIDING_STYLED_ITEM('overriding color',(#281194),#59401, + #281097); +#281194 = PRESENTATION_STYLE_ASSIGNMENT((#281195)); +#281195 = SURFACE_STYLE_USAGE(.BOTH.,#281196); +#281196 = SURFACE_SIDE_STYLE('',(#281197)); +#281197 = SURFACE_STYLE_FILL_AREA(#281198); +#281198 = FILL_AREA_STYLE('',(#281199)); +#281199 = FILL_AREA_STYLE_COLOUR('',#281115); +#281200 = OVER_RIDING_STYLED_ITEM('overriding color',(#281201),#59432, + #281097); +#281201 = PRESENTATION_STYLE_ASSIGNMENT((#281202)); +#281202 = SURFACE_STYLE_USAGE(.BOTH.,#281203); +#281203 = SURFACE_SIDE_STYLE('',(#281204)); +#281204 = SURFACE_STYLE_FILL_AREA(#281205); +#281205 = FILL_AREA_STYLE('',(#281206)); +#281206 = FILL_AREA_STYLE_COLOUR('',#281115); +#281207 = OVER_RIDING_STYLED_ITEM('overriding color',(#281208),#59457, + #281097); +#281208 = PRESENTATION_STYLE_ASSIGNMENT((#281209)); +#281209 = SURFACE_STYLE_USAGE(.BOTH.,#281210); +#281210 = SURFACE_SIDE_STYLE('',(#281211)); +#281211 = SURFACE_STYLE_FILL_AREA(#281212); +#281212 = FILL_AREA_STYLE('',(#281213)); +#281213 = FILL_AREA_STYLE_COLOUR('',#281115); +#281214 = OVER_RIDING_STYLED_ITEM('overriding color',(#281215),#59482, + #281097); +#281215 = PRESENTATION_STYLE_ASSIGNMENT((#281216)); +#281216 = SURFACE_STYLE_USAGE(.BOTH.,#281217); +#281217 = SURFACE_SIDE_STYLE('',(#281218)); +#281218 = SURFACE_STYLE_FILL_AREA(#281219); +#281219 = FILL_AREA_STYLE('',(#281220)); +#281220 = FILL_AREA_STYLE_COLOUR('',#281115); +#281221 = OVER_RIDING_STYLED_ITEM('overriding color',(#281222),#59506, + #281097); +#281222 = PRESENTATION_STYLE_ASSIGNMENT((#281223)); +#281223 = SURFACE_STYLE_USAGE(.BOTH.,#281224); +#281224 = SURFACE_SIDE_STYLE('',(#281225)); +#281225 = SURFACE_STYLE_FILL_AREA(#281226); +#281226 = FILL_AREA_STYLE('',(#281227)); +#281227 = FILL_AREA_STYLE_COLOUR('',#281115); +#281228 = OVER_RIDING_STYLED_ITEM('overriding color',(#281229),#59530, + #281097); +#281229 = PRESENTATION_STYLE_ASSIGNMENT((#281230)); +#281230 = SURFACE_STYLE_USAGE(.BOTH.,#281231); +#281231 = SURFACE_SIDE_STYLE('',(#281232)); +#281232 = SURFACE_STYLE_FILL_AREA(#281233); +#281233 = FILL_AREA_STYLE('',(#281234)); +#281234 = FILL_AREA_STYLE_COLOUR('',#281115); +#281235 = OVER_RIDING_STYLED_ITEM('overriding color',(#281236),#59555, + #281097); +#281236 = PRESENTATION_STYLE_ASSIGNMENT((#281237)); +#281237 = SURFACE_STYLE_USAGE(.BOTH.,#281238); +#281238 = SURFACE_SIDE_STYLE('',(#281239)); +#281239 = SURFACE_STYLE_FILL_AREA(#281240); +#281240 = FILL_AREA_STYLE('',(#281241)); +#281241 = FILL_AREA_STYLE_COLOUR('',#281115); +#281242 = OVER_RIDING_STYLED_ITEM('overriding color',(#281243),#59580, + #281097); +#281243 = PRESENTATION_STYLE_ASSIGNMENT((#281244)); +#281244 = SURFACE_STYLE_USAGE(.BOTH.,#281245); +#281245 = SURFACE_SIDE_STYLE('',(#281246)); +#281246 = SURFACE_STYLE_FILL_AREA(#281247); +#281247 = FILL_AREA_STYLE('',(#281248)); +#281248 = FILL_AREA_STYLE_COLOUR('',#281115); +#281249 = OVER_RIDING_STYLED_ITEM('overriding color',(#281250),#59604, + #281097); +#281250 = PRESENTATION_STYLE_ASSIGNMENT((#281251)); +#281251 = SURFACE_STYLE_USAGE(.BOTH.,#281252); +#281252 = SURFACE_SIDE_STYLE('',(#281253)); +#281253 = SURFACE_STYLE_FILL_AREA(#281254); +#281254 = FILL_AREA_STYLE('',(#281255)); +#281255 = FILL_AREA_STYLE_COLOUR('',#281115); +#281256 = OVER_RIDING_STYLED_ITEM('overriding color',(#281257),#59628, + #281097); +#281257 = PRESENTATION_STYLE_ASSIGNMENT((#281258)); +#281258 = SURFACE_STYLE_USAGE(.BOTH.,#281259); +#281259 = SURFACE_SIDE_STYLE('',(#281260)); +#281260 = SURFACE_STYLE_FILL_AREA(#281261); +#281261 = FILL_AREA_STYLE('',(#281262)); +#281262 = FILL_AREA_STYLE_COLOUR('',#281115); +#281263 = OVER_RIDING_STYLED_ITEM('overriding color',(#281264),#59653, + #281097); +#281264 = PRESENTATION_STYLE_ASSIGNMENT((#281265)); +#281265 = SURFACE_STYLE_USAGE(.BOTH.,#281266); +#281266 = SURFACE_SIDE_STYLE('',(#281267)); +#281267 = SURFACE_STYLE_FILL_AREA(#281268); +#281268 = FILL_AREA_STYLE('',(#281269)); +#281269 = FILL_AREA_STYLE_COLOUR('',#281115); +#281270 = OVER_RIDING_STYLED_ITEM('overriding color',(#281271),#59684, + #281097); +#281271 = PRESENTATION_STYLE_ASSIGNMENT((#281272)); +#281272 = SURFACE_STYLE_USAGE(.BOTH.,#281273); +#281273 = SURFACE_SIDE_STYLE('',(#281274)); +#281274 = SURFACE_STYLE_FILL_AREA(#281275); +#281275 = FILL_AREA_STYLE('',(#281276)); +#281276 = FILL_AREA_STYLE_COLOUR('',#281115); +#281277 = OVER_RIDING_STYLED_ITEM('overriding color',(#281278),#59740, + #281097); +#281278 = PRESENTATION_STYLE_ASSIGNMENT((#281279)); +#281279 = SURFACE_STYLE_USAGE(.BOTH.,#281280); +#281280 = SURFACE_SIDE_STYLE('',(#281281)); +#281281 = SURFACE_STYLE_FILL_AREA(#281282); +#281282 = FILL_AREA_STYLE('',(#281283)); +#281283 = FILL_AREA_STYLE_COLOUR('',#281115); +#281284 = OVER_RIDING_STYLED_ITEM('overriding color',(#281285),#59765, + #281097); +#281285 = PRESENTATION_STYLE_ASSIGNMENT((#281286)); +#281286 = SURFACE_STYLE_USAGE(.BOTH.,#281287); +#281287 = SURFACE_SIDE_STYLE('',(#281288)); +#281288 = SURFACE_STYLE_FILL_AREA(#281289); +#281289 = FILL_AREA_STYLE('',(#281290)); +#281290 = FILL_AREA_STYLE_COLOUR('',#281115); +#281291 = OVER_RIDING_STYLED_ITEM('overriding color',(#281292),#59783, + #281097); +#281292 = PRESENTATION_STYLE_ASSIGNMENT((#281293)); +#281293 = SURFACE_STYLE_USAGE(.BOTH.,#281294); +#281294 = SURFACE_SIDE_STYLE('',(#281295)); +#281295 = SURFACE_STYLE_FILL_AREA(#281296); +#281296 = FILL_AREA_STYLE('',(#281297)); +#281297 = FILL_AREA_STYLE_COLOUR('',#281115); +#281298 = OVER_RIDING_STYLED_ITEM('overriding color',(#281299),#59807, + #281097); +#281299 = PRESENTATION_STYLE_ASSIGNMENT((#281300)); +#281300 = SURFACE_STYLE_USAGE(.BOTH.,#281301); +#281301 = SURFACE_SIDE_STYLE('',(#281302)); +#281302 = SURFACE_STYLE_FILL_AREA(#281303); +#281303 = FILL_AREA_STYLE('',(#281304)); +#281304 = FILL_AREA_STYLE_COLOUR('',#281115); +#281305 = OVER_RIDING_STYLED_ITEM('overriding color',(#281306),#59832, + #281097); +#281306 = PRESENTATION_STYLE_ASSIGNMENT((#281307)); +#281307 = SURFACE_STYLE_USAGE(.BOTH.,#281308); +#281308 = SURFACE_SIDE_STYLE('',(#281309)); +#281309 = SURFACE_STYLE_FILL_AREA(#281310); +#281310 = FILL_AREA_STYLE('',(#281311)); +#281311 = FILL_AREA_STYLE_COLOUR('',#281115); +#281312 = OVER_RIDING_STYLED_ITEM('overriding color',(#281313),#59856, + #281097); +#281313 = PRESENTATION_STYLE_ASSIGNMENT((#281314)); +#281314 = SURFACE_STYLE_USAGE(.BOTH.,#281315); +#281315 = SURFACE_SIDE_STYLE('',(#281316)); +#281316 = SURFACE_STYLE_FILL_AREA(#281317); +#281317 = FILL_AREA_STYLE('',(#281318)); +#281318 = FILL_AREA_STYLE_COLOUR('',#281115); +#281319 = OVER_RIDING_STYLED_ITEM('overriding color',(#281320),#59873, + #281097); +#281320 = PRESENTATION_STYLE_ASSIGNMENT((#281321)); +#281321 = SURFACE_STYLE_USAGE(.BOTH.,#281322); +#281322 = SURFACE_SIDE_STYLE('',(#281323)); +#281323 = SURFACE_STYLE_FILL_AREA(#281324); +#281324 = FILL_AREA_STYLE('',(#281325)); +#281325 = FILL_AREA_STYLE_COLOUR('',#281115); +#281326 = OVER_RIDING_STYLED_ITEM('overriding color',(#281327),#59887, + #281097); +#281327 = PRESENTATION_STYLE_ASSIGNMENT((#281328)); +#281328 = SURFACE_STYLE_USAGE(.BOTH.,#281329); +#281329 = SURFACE_SIDE_STYLE('',(#281330)); +#281330 = SURFACE_STYLE_FILL_AREA(#281331); +#281331 = FILL_AREA_STYLE('',(#281332)); +#281332 = FILL_AREA_STYLE_COLOUR('',#281115); +#281333 = OVER_RIDING_STYLED_ITEM('overriding color',(#281334),#59912, + #281097); +#281334 = PRESENTATION_STYLE_ASSIGNMENT((#281335)); +#281335 = SURFACE_STYLE_USAGE(.BOTH.,#281336); +#281336 = SURFACE_SIDE_STYLE('',(#281337)); +#281337 = SURFACE_STYLE_FILL_AREA(#281338); +#281338 = FILL_AREA_STYLE('',(#281339)); +#281339 = FILL_AREA_STYLE_COLOUR('',#281115); +#281340 = OVER_RIDING_STYLED_ITEM('overriding color',(#281341),#59952, + #281097); +#281341 = PRESENTATION_STYLE_ASSIGNMENT((#281342)); +#281342 = SURFACE_STYLE_USAGE(.BOTH.,#281343); +#281343 = SURFACE_SIDE_STYLE('',(#281344)); +#281344 = SURFACE_STYLE_FILL_AREA(#281345); +#281345 = FILL_AREA_STYLE('',(#281346)); +#281346 = FILL_AREA_STYLE_COLOUR('',#281115); +#281347 = OVER_RIDING_STYLED_ITEM('overriding color',(#281348),#59976, + #281097); +#281348 = PRESENTATION_STYLE_ASSIGNMENT((#281349)); +#281349 = SURFACE_STYLE_USAGE(.BOTH.,#281350); +#281350 = SURFACE_SIDE_STYLE('',(#281351)); +#281351 = SURFACE_STYLE_FILL_AREA(#281352); +#281352 = FILL_AREA_STYLE('',(#281353)); +#281353 = FILL_AREA_STYLE_COLOUR('',#281115); +#281354 = OVER_RIDING_STYLED_ITEM('overriding color',(#281355),#60016, + #281097); +#281355 = PRESENTATION_STYLE_ASSIGNMENT((#281356)); +#281356 = SURFACE_STYLE_USAGE(.BOTH.,#281357); +#281357 = SURFACE_SIDE_STYLE('',(#281358)); +#281358 = SURFACE_STYLE_FILL_AREA(#281359); +#281359 = FILL_AREA_STYLE('',(#281360)); +#281360 = FILL_AREA_STYLE_COLOUR('',#281115); +#281361 = OVER_RIDING_STYLED_ITEM('overriding color',(#281362),#60034, + #281097); +#281362 = PRESENTATION_STYLE_ASSIGNMENT((#281363)); +#281363 = SURFACE_STYLE_USAGE(.BOTH.,#281364); +#281364 = SURFACE_SIDE_STYLE('',(#281365)); +#281365 = SURFACE_STYLE_FILL_AREA(#281366); +#281366 = FILL_AREA_STYLE('',(#281367)); +#281367 = FILL_AREA_STYLE_COLOUR('',#281115); +#281368 = OVER_RIDING_STYLED_ITEM('overriding color',(#281369),#60051, + #281097); +#281369 = PRESENTATION_STYLE_ASSIGNMENT((#281370)); +#281370 = SURFACE_STYLE_USAGE(.BOTH.,#281371); +#281371 = SURFACE_SIDE_STYLE('',(#281372)); +#281372 = SURFACE_STYLE_FILL_AREA(#281373); +#281373 = FILL_AREA_STYLE('',(#281374)); +#281374 = FILL_AREA_STYLE_COLOUR('',#281115); +#281375 = OVER_RIDING_STYLED_ITEM('overriding color',(#281376),#60076, + #281097); +#281376 = PRESENTATION_STYLE_ASSIGNMENT((#281377)); +#281377 = SURFACE_STYLE_USAGE(.BOTH.,#281378); +#281378 = SURFACE_SIDE_STYLE('',(#281379)); +#281379 = SURFACE_STYLE_FILL_AREA(#281380); +#281380 = FILL_AREA_STYLE('',(#281381)); +#281381 = FILL_AREA_STYLE_COLOUR('',#281115); +#281382 = OVER_RIDING_STYLED_ITEM('overriding color',(#281383),#60100, + #281097); +#281383 = PRESENTATION_STYLE_ASSIGNMENT((#281384)); +#281384 = SURFACE_STYLE_USAGE(.BOTH.,#281385); +#281385 = SURFACE_SIDE_STYLE('',(#281386)); +#281386 = SURFACE_STYLE_FILL_AREA(#281387); +#281387 = FILL_AREA_STYLE('',(#281388)); +#281388 = FILL_AREA_STYLE_COLOUR('',#281115); +#281389 = OVER_RIDING_STYLED_ITEM('overriding color',(#281390),#60161, + #281097); +#281390 = PRESENTATION_STYLE_ASSIGNMENT((#281391)); +#281391 = SURFACE_STYLE_USAGE(.BOTH.,#281392); +#281392 = SURFACE_SIDE_STYLE('',(#281393)); +#281393 = SURFACE_STYLE_FILL_AREA(#281394); +#281394 = FILL_AREA_STYLE('',(#281395)); +#281395 = FILL_AREA_STYLE_COLOUR('',#281115); +#281396 = OVER_RIDING_STYLED_ITEM('overriding color',(#281397),#60173, + #281097); +#281397 = PRESENTATION_STYLE_ASSIGNMENT((#281398)); +#281398 = SURFACE_STYLE_USAGE(.BOTH.,#281399); +#281399 = SURFACE_SIDE_STYLE('',(#281400)); +#281400 = SURFACE_STYLE_FILL_AREA(#281401); +#281401 = FILL_AREA_STYLE('',(#281402)); +#281402 = FILL_AREA_STYLE_COLOUR('',#281115); +#281403 = OVER_RIDING_STYLED_ITEM('overriding color',(#281404),#60190, + #281097); +#281404 = PRESENTATION_STYLE_ASSIGNMENT((#281405)); +#281405 = SURFACE_STYLE_USAGE(.BOTH.,#281406); +#281406 = SURFACE_SIDE_STYLE('',(#281407)); +#281407 = SURFACE_STYLE_FILL_AREA(#281408); +#281408 = FILL_AREA_STYLE('',(#281409)); +#281409 = FILL_AREA_STYLE_COLOUR('',#281115); +#281410 = OVER_RIDING_STYLED_ITEM('overriding color',(#281411),#60207, + #281097); +#281411 = PRESENTATION_STYLE_ASSIGNMENT((#281412)); +#281412 = SURFACE_STYLE_USAGE(.BOTH.,#281413); +#281413 = SURFACE_SIDE_STYLE('',(#281414)); +#281414 = SURFACE_STYLE_FILL_AREA(#281415); +#281415 = FILL_AREA_STYLE('',(#281416)); +#281416 = FILL_AREA_STYLE_COLOUR('',#281115); +#281417 = OVER_RIDING_STYLED_ITEM('overriding color',(#281418),#60233, + #281097); +#281418 = PRESENTATION_STYLE_ASSIGNMENT((#281419)); +#281419 = SURFACE_STYLE_USAGE(.BOTH.,#281420); +#281420 = SURFACE_SIDE_STYLE('',(#281421)); +#281421 = SURFACE_STYLE_FILL_AREA(#281422); +#281422 = FILL_AREA_STYLE('',(#281423)); +#281423 = FILL_AREA_STYLE_COLOUR('',#281115); +#281424 = OVER_RIDING_STYLED_ITEM('overriding color',(#281425),#60257, + #281097); +#281425 = PRESENTATION_STYLE_ASSIGNMENT((#281426)); +#281426 = SURFACE_STYLE_USAGE(.BOTH.,#281427); +#281427 = SURFACE_SIDE_STYLE('',(#281428)); +#281428 = SURFACE_STYLE_FILL_AREA(#281429); +#281429 = FILL_AREA_STYLE('',(#281430)); +#281430 = FILL_AREA_STYLE_COLOUR('',#281115); +#281431 = OVER_RIDING_STYLED_ITEM('overriding color',(#281432),#60288, + #281097); +#281432 = PRESENTATION_STYLE_ASSIGNMENT((#281433)); +#281433 = SURFACE_STYLE_USAGE(.BOTH.,#281434); +#281434 = SURFACE_SIDE_STYLE('',(#281435)); +#281435 = SURFACE_STYLE_FILL_AREA(#281436); +#281436 = FILL_AREA_STYLE('',(#281437)); +#281437 = FILL_AREA_STYLE_COLOUR('',#281115); +#281438 = OVER_RIDING_STYLED_ITEM('overriding color',(#281439),#60306, + #281097); +#281439 = PRESENTATION_STYLE_ASSIGNMENT((#281440)); +#281440 = SURFACE_STYLE_USAGE(.BOTH.,#281441); +#281441 = SURFACE_SIDE_STYLE('',(#281442)); +#281442 = SURFACE_STYLE_FILL_AREA(#281443); +#281443 = FILL_AREA_STYLE('',(#281444)); +#281444 = FILL_AREA_STYLE_COLOUR('',#281115); +#281445 = OVER_RIDING_STYLED_ITEM('overriding color',(#281446),#60320, + #281097); +#281446 = PRESENTATION_STYLE_ASSIGNMENT((#281447)); +#281447 = SURFACE_STYLE_USAGE(.BOTH.,#281448); +#281448 = SURFACE_SIDE_STYLE('',(#281449)); +#281449 = SURFACE_STYLE_FILL_AREA(#281450); +#281450 = FILL_AREA_STYLE('',(#281451)); +#281451 = FILL_AREA_STYLE_COLOUR('',#281115); +#281452 = OVER_RIDING_STYLED_ITEM('overriding color',(#281453),#60334, + #281097); +#281453 = PRESENTATION_STYLE_ASSIGNMENT((#281454)); +#281454 = SURFACE_STYLE_USAGE(.BOTH.,#281455); +#281455 = SURFACE_SIDE_STYLE('',(#281456)); +#281456 = SURFACE_STYLE_FILL_AREA(#281457); +#281457 = FILL_AREA_STYLE('',(#281458)); +#281458 = FILL_AREA_STYLE_COLOUR('',#281115); +#281459 = OVER_RIDING_STYLED_ITEM('overriding color',(#281460),#60348, + #281097); +#281460 = PRESENTATION_STYLE_ASSIGNMENT((#281461)); +#281461 = SURFACE_STYLE_USAGE(.BOTH.,#281462); +#281462 = SURFACE_SIDE_STYLE('',(#281463)); +#281463 = SURFACE_STYLE_FILL_AREA(#281464); +#281464 = FILL_AREA_STYLE('',(#281465)); +#281465 = FILL_AREA_STYLE_COLOUR('',#281115); +#281466 = OVER_RIDING_STYLED_ITEM('overriding color',(#281467),#60360, + #281097); +#281467 = PRESENTATION_STYLE_ASSIGNMENT((#281468)); +#281468 = SURFACE_STYLE_USAGE(.BOTH.,#281469); +#281469 = SURFACE_SIDE_STYLE('',(#281470)); +#281470 = SURFACE_STYLE_FILL_AREA(#281471); +#281471 = FILL_AREA_STYLE('',(#281472)); +#281472 = FILL_AREA_STYLE_COLOUR('',#281115); +#281473 = OVER_RIDING_STYLED_ITEM('overriding color',(#281474),#60372, + #281097); +#281474 = PRESENTATION_STYLE_ASSIGNMENT((#281475)); +#281475 = SURFACE_STYLE_USAGE(.BOTH.,#281476); +#281476 = SURFACE_SIDE_STYLE('',(#281477)); +#281477 = SURFACE_STYLE_FILL_AREA(#281478); +#281478 = FILL_AREA_STYLE('',(#281479)); +#281479 = FILL_AREA_STYLE_COLOUR('',#281115); +#281480 = OVER_RIDING_STYLED_ITEM('overriding color',(#281481),#60384, + #281097); +#281481 = PRESENTATION_STYLE_ASSIGNMENT((#281482)); +#281482 = SURFACE_STYLE_USAGE(.BOTH.,#281483); +#281483 = SURFACE_SIDE_STYLE('',(#281484)); +#281484 = SURFACE_STYLE_FILL_AREA(#281485); +#281485 = FILL_AREA_STYLE('',(#281486)); +#281486 = FILL_AREA_STYLE_COLOUR('',#281115); +#281487 = STYLED_ITEM('color',(#281488),#60396); +#281488 = PRESENTATION_STYLE_ASSIGNMENT((#281489,#281494)); +#281489 = SURFACE_STYLE_USAGE(.BOTH.,#281490); +#281490 = SURFACE_SIDE_STYLE('',(#281491)); +#281491 = SURFACE_STYLE_FILL_AREA(#281492); +#281492 = FILL_AREA_STYLE('',(#281493)); +#281493 = FILL_AREA_STYLE_COLOUR('',#281104); +#281494 = CURVE_STYLE('',#281495,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#281495 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#281496 = OVER_RIDING_STYLED_ITEM('overriding color',(#281497),#60398, + #281487); +#281497 = PRESENTATION_STYLE_ASSIGNMENT((#281498)); +#281498 = SURFACE_STYLE_USAGE(.BOTH.,#281499); +#281499 = SURFACE_SIDE_STYLE('',(#281500)); +#281500 = SURFACE_STYLE_FILL_AREA(#281501); +#281501 = FILL_AREA_STYLE('',(#281502)); +#281502 = FILL_AREA_STYLE_COLOUR('',#270441); +#281503 = OVER_RIDING_STYLED_ITEM('overriding color',(#281504),#60522, + #281487); +#281504 = PRESENTATION_STYLE_ASSIGNMENT((#281505)); +#281505 = SURFACE_STYLE_USAGE(.BOTH.,#281506); +#281506 = SURFACE_SIDE_STYLE('',(#281507)); +#281507 = SURFACE_STYLE_FILL_AREA(#281508); +#281508 = FILL_AREA_STYLE('',(#281509)); +#281509 = FILL_AREA_STYLE_COLOUR('',#270441); +#281510 = OVER_RIDING_STYLED_ITEM('overriding color',(#281511),#60553, + #281487); +#281511 = PRESENTATION_STYLE_ASSIGNMENT((#281512)); +#281512 = SURFACE_STYLE_USAGE(.BOTH.,#281513); +#281513 = SURFACE_SIDE_STYLE('',(#281514)); +#281514 = SURFACE_STYLE_FILL_AREA(#281515); +#281515 = FILL_AREA_STYLE('',(#281516)); +#281516 = FILL_AREA_STYLE_COLOUR('',#270441); +#281517 = OVER_RIDING_STYLED_ITEM('overriding color',(#281518),#60578, + #281487); +#281518 = PRESENTATION_STYLE_ASSIGNMENT((#281519)); +#281519 = SURFACE_STYLE_USAGE(.BOTH.,#281520); +#281520 = SURFACE_SIDE_STYLE('',(#281521)); +#281521 = SURFACE_STYLE_FILL_AREA(#281522); +#281522 = FILL_AREA_STYLE('',(#281523)); +#281523 = FILL_AREA_STYLE_COLOUR('',#270441); +#281524 = OVER_RIDING_STYLED_ITEM('overriding color',(#281525),#60609, + #281487); +#281525 = PRESENTATION_STYLE_ASSIGNMENT((#281526)); +#281526 = SURFACE_STYLE_USAGE(.BOTH.,#281527); +#281527 = SURFACE_SIDE_STYLE('',(#281528)); +#281528 = SURFACE_STYLE_FILL_AREA(#281529); +#281529 = FILL_AREA_STYLE('',(#281530)); +#281530 = FILL_AREA_STYLE_COLOUR('',#270441); +#281531 = OVER_RIDING_STYLED_ITEM('overriding color',(#281532),#60633, + #281487); +#281532 = PRESENTATION_STYLE_ASSIGNMENT((#281533)); +#281533 = SURFACE_STYLE_USAGE(.BOTH.,#281534); +#281534 = SURFACE_SIDE_STYLE('',(#281535)); +#281535 = SURFACE_STYLE_FILL_AREA(#281536); +#281536 = FILL_AREA_STYLE('',(#281537)); +#281537 = FILL_AREA_STYLE_COLOUR('',#270441); +#281538 = OVER_RIDING_STYLED_ITEM('overriding color',(#281539),#60698, + #281487); +#281539 = PRESENTATION_STYLE_ASSIGNMENT((#281540)); +#281540 = SURFACE_STYLE_USAGE(.BOTH.,#281541); +#281541 = SURFACE_SIDE_STYLE('',(#281542)); +#281542 = SURFACE_STYLE_FILL_AREA(#281543); +#281543 = FILL_AREA_STYLE('',(#281544)); +#281544 = FILL_AREA_STYLE_COLOUR('',#270441); +#281545 = OVER_RIDING_STYLED_ITEM('overriding color',(#281546),#60723, + #281487); +#281546 = PRESENTATION_STYLE_ASSIGNMENT((#281547)); +#281547 = SURFACE_STYLE_USAGE(.BOTH.,#281548); +#281548 = SURFACE_SIDE_STYLE('',(#281549)); +#281549 = SURFACE_STYLE_FILL_AREA(#281550); +#281550 = FILL_AREA_STYLE('',(#281551)); +#281551 = FILL_AREA_STYLE_COLOUR('',#270441); +#281552 = OVER_RIDING_STYLED_ITEM('overriding color',(#281553),#60748, + #281487); +#281553 = PRESENTATION_STYLE_ASSIGNMENT((#281554)); +#281554 = SURFACE_STYLE_USAGE(.BOTH.,#281555); +#281555 = SURFACE_SIDE_STYLE('',(#281556)); +#281556 = SURFACE_STYLE_FILL_AREA(#281557); +#281557 = FILL_AREA_STYLE('',(#281558)); +#281558 = FILL_AREA_STYLE_COLOUR('',#270441); +#281559 = OVER_RIDING_STYLED_ITEM('overriding color',(#281560),#60772, + #281487); +#281560 = PRESENTATION_STYLE_ASSIGNMENT((#281561)); +#281561 = SURFACE_STYLE_USAGE(.BOTH.,#281562); +#281562 = SURFACE_SIDE_STYLE('',(#281563)); +#281563 = SURFACE_STYLE_FILL_AREA(#281564); +#281564 = FILL_AREA_STYLE('',(#281565)); +#281565 = FILL_AREA_STYLE_COLOUR('',#270441); +#281566 = OVER_RIDING_STYLED_ITEM('overriding color',(#281567),#60829, + #281487); +#281567 = PRESENTATION_STYLE_ASSIGNMENT((#281568)); +#281568 = SURFACE_STYLE_USAGE(.BOTH.,#281569); +#281569 = SURFACE_SIDE_STYLE('',(#281570)); +#281570 = SURFACE_STYLE_FILL_AREA(#281571); +#281571 = FILL_AREA_STYLE('',(#281572)); +#281572 = FILL_AREA_STYLE_COLOUR('',#270441); +#281573 = OVER_RIDING_STYLED_ITEM('overriding color',(#281574),#60854, + #281487); +#281574 = PRESENTATION_STYLE_ASSIGNMENT((#281575)); +#281575 = SURFACE_STYLE_USAGE(.BOTH.,#281576); +#281576 = SURFACE_SIDE_STYLE('',(#281577)); +#281577 = SURFACE_STYLE_FILL_AREA(#281578); +#281578 = FILL_AREA_STYLE('',(#281579)); +#281579 = FILL_AREA_STYLE_COLOUR('',#270441); +#281580 = OVER_RIDING_STYLED_ITEM('overriding color',(#281581),#60885, + #281487); +#281581 = PRESENTATION_STYLE_ASSIGNMENT((#281582)); +#281582 = SURFACE_STYLE_USAGE(.BOTH.,#281583); +#281583 = SURFACE_SIDE_STYLE('',(#281584)); +#281584 = SURFACE_STYLE_FILL_AREA(#281585); +#281585 = FILL_AREA_STYLE('',(#281586)); +#281586 = FILL_AREA_STYLE_COLOUR('',#270441); +#281587 = OVER_RIDING_STYLED_ITEM('overriding color',(#281588),#60909, + #281487); +#281588 = PRESENTATION_STYLE_ASSIGNMENT((#281589)); +#281589 = SURFACE_STYLE_USAGE(.BOTH.,#281590); +#281590 = SURFACE_SIDE_STYLE('',(#281591)); +#281591 = SURFACE_STYLE_FILL_AREA(#281592); +#281592 = FILL_AREA_STYLE('',(#281593)); +#281593 = FILL_AREA_STYLE_COLOUR('',#270441); +#281594 = OVER_RIDING_STYLED_ITEM('overriding color',(#281595),#60940, + #281487); +#281595 = PRESENTATION_STYLE_ASSIGNMENT((#281596)); +#281596 = SURFACE_STYLE_USAGE(.BOTH.,#281597); +#281597 = SURFACE_SIDE_STYLE('',(#281598)); +#281598 = SURFACE_STYLE_FILL_AREA(#281599); +#281599 = FILL_AREA_STYLE('',(#281600)); +#281600 = FILL_AREA_STYLE_COLOUR('',#270441); +#281601 = OVER_RIDING_STYLED_ITEM('overriding color',(#281602),#60958, + #281487); +#281602 = PRESENTATION_STYLE_ASSIGNMENT((#281603)); +#281603 = SURFACE_STYLE_USAGE(.BOTH.,#281604); +#281604 = SURFACE_SIDE_STYLE('',(#281605)); +#281605 = SURFACE_STYLE_FILL_AREA(#281606); +#281606 = FILL_AREA_STYLE('',(#281607)); +#281607 = FILL_AREA_STYLE_COLOUR('',#270441); +#281608 = OVER_RIDING_STYLED_ITEM('overriding color',(#281609),#60982, + #281487); +#281609 = PRESENTATION_STYLE_ASSIGNMENT((#281610)); +#281610 = SURFACE_STYLE_USAGE(.BOTH.,#281611); +#281611 = SURFACE_SIDE_STYLE('',(#281612)); +#281612 = SURFACE_STYLE_FILL_AREA(#281613); +#281613 = FILL_AREA_STYLE('',(#281614)); +#281614 = FILL_AREA_STYLE_COLOUR('',#270441); +#281615 = OVER_RIDING_STYLED_ITEM('overriding color',(#281616),#61019, + #281487); +#281616 = PRESENTATION_STYLE_ASSIGNMENT((#281617)); +#281617 = SURFACE_STYLE_USAGE(.BOTH.,#281618); +#281618 = SURFACE_SIDE_STYLE('',(#281619)); +#281619 = SURFACE_STYLE_FILL_AREA(#281620); +#281620 = FILL_AREA_STYLE('',(#281621)); +#281621 = FILL_AREA_STYLE_COLOUR('',#270441); +#281622 = OVER_RIDING_STYLED_ITEM('overriding color',(#281623),#61052, + #281487); +#281623 = PRESENTATION_STYLE_ASSIGNMENT((#281624)); +#281624 = SURFACE_STYLE_USAGE(.BOTH.,#281625); +#281625 = SURFACE_SIDE_STYLE('',(#281626)); +#281626 = SURFACE_STYLE_FILL_AREA(#281627); +#281627 = FILL_AREA_STYLE('',(#281628)); +#281628 = FILL_AREA_STYLE_COLOUR('',#270441); +#281629 = OVER_RIDING_STYLED_ITEM('overriding color',(#281630),#61076, + #281487); +#281630 = PRESENTATION_STYLE_ASSIGNMENT((#281631)); +#281631 = SURFACE_STYLE_USAGE(.BOTH.,#281632); +#281632 = SURFACE_SIDE_STYLE('',(#281633)); +#281633 = SURFACE_STYLE_FILL_AREA(#281634); +#281634 = FILL_AREA_STYLE('',(#281635)); +#281635 = FILL_AREA_STYLE_COLOUR('',#270441); +#281636 = OVER_RIDING_STYLED_ITEM('overriding color',(#281637),#61227, + #281487); +#281637 = PRESENTATION_STYLE_ASSIGNMENT((#281638)); +#281638 = SURFACE_STYLE_USAGE(.BOTH.,#281639); +#281639 = SURFACE_SIDE_STYLE('',(#281640)); +#281640 = SURFACE_STYLE_FILL_AREA(#281641); +#281641 = FILL_AREA_STYLE('',(#281642)); +#281642 = FILL_AREA_STYLE_COLOUR('',#270441); +#281643 = OVER_RIDING_STYLED_ITEM('overriding color',(#281644),#61260, + #281487); +#281644 = PRESENTATION_STYLE_ASSIGNMENT((#281645)); +#281645 = SURFACE_STYLE_USAGE(.BOTH.,#281646); +#281646 = SURFACE_SIDE_STYLE('',(#281647)); +#281647 = SURFACE_STYLE_FILL_AREA(#281648); +#281648 = FILL_AREA_STYLE('',(#281649)); +#281649 = FILL_AREA_STYLE_COLOUR('',#270441); +#281650 = OVER_RIDING_STYLED_ITEM('overriding color',(#281651),#61277, + #281487); +#281651 = PRESENTATION_STYLE_ASSIGNMENT((#281652)); +#281652 = SURFACE_STYLE_USAGE(.BOTH.,#281653); +#281653 = SURFACE_SIDE_STYLE('',(#281654)); +#281654 = SURFACE_STYLE_FILL_AREA(#281655); +#281655 = FILL_AREA_STYLE('',(#281656)); +#281656 = FILL_AREA_STYLE_COLOUR('',#270441); +#281657 = OVER_RIDING_STYLED_ITEM('overriding color',(#281658),#61440, + #281487); +#281658 = PRESENTATION_STYLE_ASSIGNMENT((#281659)); +#281659 = SURFACE_STYLE_USAGE(.BOTH.,#281660); +#281660 = SURFACE_SIDE_STYLE('',(#281661)); +#281661 = SURFACE_STYLE_FILL_AREA(#281662); +#281662 = FILL_AREA_STYLE('',(#281663)); +#281663 = FILL_AREA_STYLE_COLOUR('',#270441); +#281664 = OVER_RIDING_STYLED_ITEM('overriding color',(#281665),#61473, + #281487); +#281665 = PRESENTATION_STYLE_ASSIGNMENT((#281666)); +#281666 = SURFACE_STYLE_USAGE(.BOTH.,#281667); +#281667 = SURFACE_SIDE_STYLE('',(#281668)); +#281668 = SURFACE_STYLE_FILL_AREA(#281669); +#281669 = FILL_AREA_STYLE('',(#281670)); +#281670 = FILL_AREA_STYLE_COLOUR('',#270441); +#281671 = OVER_RIDING_STYLED_ITEM('overriding color',(#281672),#61497, + #281487); +#281672 = PRESENTATION_STYLE_ASSIGNMENT((#281673)); +#281673 = SURFACE_STYLE_USAGE(.BOTH.,#281674); +#281674 = SURFACE_SIDE_STYLE('',(#281675)); +#281675 = SURFACE_STYLE_FILL_AREA(#281676); +#281676 = FILL_AREA_STYLE('',(#281677)); +#281677 = FILL_AREA_STYLE_COLOUR('',#270441); +#281678 = OVER_RIDING_STYLED_ITEM('overriding color',(#281679),#61521, + #281487); +#281679 = PRESENTATION_STYLE_ASSIGNMENT((#281680)); +#281680 = SURFACE_STYLE_USAGE(.BOTH.,#281681); +#281681 = SURFACE_SIDE_STYLE('',(#281682)); +#281682 = SURFACE_STYLE_FILL_AREA(#281683); +#281683 = FILL_AREA_STYLE('',(#281684)); +#281684 = FILL_AREA_STYLE_COLOUR('',#270441); +#281685 = OVER_RIDING_STYLED_ITEM('overriding color',(#281686),#61554, + #281487); +#281686 = PRESENTATION_STYLE_ASSIGNMENT((#281687)); +#281687 = SURFACE_STYLE_USAGE(.BOTH.,#281688); +#281688 = SURFACE_SIDE_STYLE('',(#281689)); +#281689 = SURFACE_STYLE_FILL_AREA(#281690); +#281690 = FILL_AREA_STYLE('',(#281691)); +#281691 = FILL_AREA_STYLE_COLOUR('',#270441); +#281692 = OVER_RIDING_STYLED_ITEM('overriding color',(#281693),#61571, + #281487); +#281693 = PRESENTATION_STYLE_ASSIGNMENT((#281694)); +#281694 = SURFACE_STYLE_USAGE(.BOTH.,#281695); +#281695 = SURFACE_SIDE_STYLE('',(#281696)); +#281696 = SURFACE_STYLE_FILL_AREA(#281697); +#281697 = FILL_AREA_STYLE('',(#281698)); +#281698 = FILL_AREA_STYLE_COLOUR('',#270441); +#281699 = OVER_RIDING_STYLED_ITEM('overriding color',(#281700),#61596, + #281487); +#281700 = PRESENTATION_STYLE_ASSIGNMENT((#281701)); +#281701 = SURFACE_STYLE_USAGE(.BOTH.,#281702); +#281702 = SURFACE_SIDE_STYLE('',(#281703)); +#281703 = SURFACE_STYLE_FILL_AREA(#281704); +#281704 = FILL_AREA_STYLE('',(#281705)); +#281705 = FILL_AREA_STYLE_COLOUR('',#270441); +#281706 = OVER_RIDING_STYLED_ITEM('overriding color',(#281707),#61613, + #281487); +#281707 = PRESENTATION_STYLE_ASSIGNMENT((#281708)); +#281708 = SURFACE_STYLE_USAGE(.BOTH.,#281709); +#281709 = SURFACE_SIDE_STYLE('',(#281710)); +#281710 = SURFACE_STYLE_FILL_AREA(#281711); +#281711 = FILL_AREA_STYLE('',(#281712)); +#281712 = FILL_AREA_STYLE_COLOUR('',#270441); +#281713 = OVER_RIDING_STYLED_ITEM('overriding color',(#281714),#61662, + #281487); +#281714 = PRESENTATION_STYLE_ASSIGNMENT((#281715)); +#281715 = SURFACE_STYLE_USAGE(.BOTH.,#281716); +#281716 = SURFACE_SIDE_STYLE('',(#281717)); +#281717 = SURFACE_STYLE_FILL_AREA(#281718); +#281718 = FILL_AREA_STYLE('',(#281719)); +#281719 = FILL_AREA_STYLE_COLOUR('',#270441); +#281720 = OVER_RIDING_STYLED_ITEM('overriding color',(#281721),#61687, + #281487); +#281721 = PRESENTATION_STYLE_ASSIGNMENT((#281722)); +#281722 = SURFACE_STYLE_USAGE(.BOTH.,#281723); +#281723 = SURFACE_SIDE_STYLE('',(#281724)); +#281724 = SURFACE_STYLE_FILL_AREA(#281725); +#281725 = FILL_AREA_STYLE('',(#281726)); +#281726 = FILL_AREA_STYLE_COLOUR('',#270441); +#281727 = OVER_RIDING_STYLED_ITEM('overriding color',(#281728),#61730, + #281487); +#281728 = PRESENTATION_STYLE_ASSIGNMENT((#281729)); +#281729 = SURFACE_STYLE_USAGE(.BOTH.,#281730); +#281730 = SURFACE_SIDE_STYLE('',(#281731)); +#281731 = SURFACE_STYLE_FILL_AREA(#281732); +#281732 = FILL_AREA_STYLE('',(#281733)); +#281733 = FILL_AREA_STYLE_COLOUR('',#270441); +#281734 = OVER_RIDING_STYLED_ITEM('overriding color',(#281735),#61746, + #281487); +#281735 = PRESENTATION_STYLE_ASSIGNMENT((#281736)); +#281736 = SURFACE_STYLE_USAGE(.BOTH.,#281737); +#281737 = SURFACE_SIDE_STYLE('',(#281738)); +#281738 = SURFACE_STYLE_FILL_AREA(#281739); +#281739 = FILL_AREA_STYLE('',(#281740)); +#281740 = FILL_AREA_STYLE_COLOUR('',#270441); +#281741 = OVER_RIDING_STYLED_ITEM('overriding color',(#281742),#61786, + #281487); +#281742 = PRESENTATION_STYLE_ASSIGNMENT((#281743)); +#281743 = SURFACE_STYLE_USAGE(.BOTH.,#281744); +#281744 = SURFACE_SIDE_STYLE('',(#281745)); +#281745 = SURFACE_STYLE_FILL_AREA(#281746); +#281746 = FILL_AREA_STYLE('',(#281747)); +#281747 = FILL_AREA_STYLE_COLOUR('',#270441); +#281748 = OVER_RIDING_STYLED_ITEM('overriding color',(#281749),#61842, + #281487); +#281749 = PRESENTATION_STYLE_ASSIGNMENT((#281750)); +#281750 = SURFACE_STYLE_USAGE(.BOTH.,#281751); +#281751 = SURFACE_SIDE_STYLE('',(#281752)); +#281752 = SURFACE_STYLE_FILL_AREA(#281753); +#281753 = FILL_AREA_STYLE('',(#281754)); +#281754 = FILL_AREA_STYLE_COLOUR('',#270441); +#281755 = OVER_RIDING_STYLED_ITEM('overriding color',(#281756),#61859, + #281487); +#281756 = PRESENTATION_STYLE_ASSIGNMENT((#281757)); +#281757 = SURFACE_STYLE_USAGE(.BOTH.,#281758); +#281758 = SURFACE_SIDE_STYLE('',(#281759)); +#281759 = SURFACE_STYLE_FILL_AREA(#281760); +#281760 = FILL_AREA_STYLE('',(#281761)); +#281761 = FILL_AREA_STYLE_COLOUR('',#270441); +#281762 = OVER_RIDING_STYLED_ITEM('overriding color',(#281763),#61884, + #281487); +#281763 = PRESENTATION_STYLE_ASSIGNMENT((#281764)); +#281764 = SURFACE_STYLE_USAGE(.BOTH.,#281765); +#281765 = SURFACE_SIDE_STYLE('',(#281766)); +#281766 = SURFACE_STYLE_FILL_AREA(#281767); +#281767 = FILL_AREA_STYLE('',(#281768)); +#281768 = FILL_AREA_STYLE_COLOUR('',#270441); +#281769 = OVER_RIDING_STYLED_ITEM('overriding color',(#281770),#61932, + #281487); +#281770 = PRESENTATION_STYLE_ASSIGNMENT((#281771)); +#281771 = SURFACE_STYLE_USAGE(.BOTH.,#281772); +#281772 = SURFACE_SIDE_STYLE('',(#281773)); +#281773 = SURFACE_STYLE_FILL_AREA(#281774); +#281774 = FILL_AREA_STYLE('',(#281775)); +#281775 = FILL_AREA_STYLE_COLOUR('',#270441); +#281776 = OVER_RIDING_STYLED_ITEM('overriding color',(#281777),#61963, + #281487); +#281777 = PRESENTATION_STYLE_ASSIGNMENT((#281778)); +#281778 = SURFACE_STYLE_USAGE(.BOTH.,#281779); +#281779 = SURFACE_SIDE_STYLE('',(#281780)); +#281780 = SURFACE_STYLE_FILL_AREA(#281781); +#281781 = FILL_AREA_STYLE('',(#281782)); +#281782 = FILL_AREA_STYLE_COLOUR('',#270441); +#281783 = OVER_RIDING_STYLED_ITEM('overriding color',(#281784),#61988, + #281487); +#281784 = PRESENTATION_STYLE_ASSIGNMENT((#281785)); +#281785 = SURFACE_STYLE_USAGE(.BOTH.,#281786); +#281786 = SURFACE_SIDE_STYLE('',(#281787)); +#281787 = SURFACE_STYLE_FILL_AREA(#281788); +#281788 = FILL_AREA_STYLE('',(#281789)); +#281789 = FILL_AREA_STYLE_COLOUR('',#270441); +#281790 = OVER_RIDING_STYLED_ITEM('overriding color',(#281791),#62013, + #281487); +#281791 = PRESENTATION_STYLE_ASSIGNMENT((#281792)); +#281792 = SURFACE_STYLE_USAGE(.BOTH.,#281793); +#281793 = SURFACE_SIDE_STYLE('',(#281794)); +#281794 = SURFACE_STYLE_FILL_AREA(#281795); +#281795 = FILL_AREA_STYLE('',(#281796)); +#281796 = FILL_AREA_STYLE_COLOUR('',#270441); +#281797 = OVER_RIDING_STYLED_ITEM('overriding color',(#281798),#62037, + #281487); +#281798 = PRESENTATION_STYLE_ASSIGNMENT((#281799)); +#281799 = SURFACE_STYLE_USAGE(.BOTH.,#281800); +#281800 = SURFACE_SIDE_STYLE('',(#281801)); +#281801 = SURFACE_STYLE_FILL_AREA(#281802); +#281802 = FILL_AREA_STYLE('',(#281803)); +#281803 = FILL_AREA_STYLE_COLOUR('',#270441); +#281804 = OVER_RIDING_STYLED_ITEM('overriding color',(#281805),#62061, + #281487); +#281805 = PRESENTATION_STYLE_ASSIGNMENT((#281806)); +#281806 = SURFACE_STYLE_USAGE(.BOTH.,#281807); +#281807 = SURFACE_SIDE_STYLE('',(#281808)); +#281808 = SURFACE_STYLE_FILL_AREA(#281809); +#281809 = FILL_AREA_STYLE('',(#281810)); +#281810 = FILL_AREA_STYLE_COLOUR('',#270441); +#281811 = OVER_RIDING_STYLED_ITEM('overriding color',(#281812),#62086, + #281487); +#281812 = PRESENTATION_STYLE_ASSIGNMENT((#281813)); +#281813 = SURFACE_STYLE_USAGE(.BOTH.,#281814); +#281814 = SURFACE_SIDE_STYLE('',(#281815)); +#281815 = SURFACE_STYLE_FILL_AREA(#281816); +#281816 = FILL_AREA_STYLE('',(#281817)); +#281817 = FILL_AREA_STYLE_COLOUR('',#270441); +#281818 = OVER_RIDING_STYLED_ITEM('overriding color',(#281819),#62111, + #281487); +#281819 = PRESENTATION_STYLE_ASSIGNMENT((#281820)); +#281820 = SURFACE_STYLE_USAGE(.BOTH.,#281821); +#281821 = SURFACE_SIDE_STYLE('',(#281822)); +#281822 = SURFACE_STYLE_FILL_AREA(#281823); +#281823 = FILL_AREA_STYLE('',(#281824)); +#281824 = FILL_AREA_STYLE_COLOUR('',#270441); +#281825 = OVER_RIDING_STYLED_ITEM('overriding color',(#281826),#62128, + #281487); +#281826 = PRESENTATION_STYLE_ASSIGNMENT((#281827)); +#281827 = SURFACE_STYLE_USAGE(.BOTH.,#281828); +#281828 = SURFACE_SIDE_STYLE('',(#281829)); +#281829 = SURFACE_STYLE_FILL_AREA(#281830); +#281830 = FILL_AREA_STYLE('',(#281831)); +#281831 = FILL_AREA_STYLE_COLOUR('',#270441); +#281832 = OVER_RIDING_STYLED_ITEM('overriding color',(#281833),#62152, + #281487); +#281833 = PRESENTATION_STYLE_ASSIGNMENT((#281834)); +#281834 = SURFACE_STYLE_USAGE(.BOTH.,#281835); +#281835 = SURFACE_SIDE_STYLE('',(#281836)); +#281836 = SURFACE_STYLE_FILL_AREA(#281837); +#281837 = FILL_AREA_STYLE('',(#281838)); +#281838 = FILL_AREA_STYLE_COLOUR('',#270441); +#281839 = OVER_RIDING_STYLED_ITEM('overriding color',(#281840),#62168, + #281487); +#281840 = PRESENTATION_STYLE_ASSIGNMENT((#281841)); +#281841 = SURFACE_STYLE_USAGE(.BOTH.,#281842); +#281842 = SURFACE_SIDE_STYLE('',(#281843)); +#281843 = SURFACE_STYLE_FILL_AREA(#281844); +#281844 = FILL_AREA_STYLE('',(#281845)); +#281845 = FILL_AREA_STYLE_COLOUR('',#270441); +#281846 = OVER_RIDING_STYLED_ITEM('overriding color',(#281847),#62185, + #281487); +#281847 = PRESENTATION_STYLE_ASSIGNMENT((#281848)); +#281848 = SURFACE_STYLE_USAGE(.BOTH.,#281849); +#281849 = SURFACE_SIDE_STYLE('',(#281850)); +#281850 = SURFACE_STYLE_FILL_AREA(#281851); +#281851 = FILL_AREA_STYLE('',(#281852)); +#281852 = FILL_AREA_STYLE_COLOUR('',#270441); +#281853 = OVER_RIDING_STYLED_ITEM('overriding color',(#281854),#62228, + #281487); +#281854 = PRESENTATION_STYLE_ASSIGNMENT((#281855)); +#281855 = SURFACE_STYLE_USAGE(.BOTH.,#281856); +#281856 = SURFACE_SIDE_STYLE('',(#281857)); +#281857 = SURFACE_STYLE_FILL_AREA(#281858); +#281858 = FILL_AREA_STYLE('',(#281859)); +#281859 = FILL_AREA_STYLE_COLOUR('',#270441); +#281860 = OVER_RIDING_STYLED_ITEM('overriding color',(#281861),#62252, + #281487); +#281861 = PRESENTATION_STYLE_ASSIGNMENT((#281862)); +#281862 = SURFACE_STYLE_USAGE(.BOTH.,#281863); +#281863 = SURFACE_SIDE_STYLE('',(#281864)); +#281864 = SURFACE_STYLE_FILL_AREA(#281865); +#281865 = FILL_AREA_STYLE('',(#281866)); +#281866 = FILL_AREA_STYLE_COLOUR('',#270441); +#281867 = OVER_RIDING_STYLED_ITEM('overriding color',(#281868),#62278, + #281487); +#281868 = PRESENTATION_STYLE_ASSIGNMENT((#281869)); +#281869 = SURFACE_STYLE_USAGE(.BOTH.,#281870); +#281870 = SURFACE_SIDE_STYLE('',(#281871)); +#281871 = SURFACE_STYLE_FILL_AREA(#281872); +#281872 = FILL_AREA_STYLE('',(#281873)); +#281873 = FILL_AREA_STYLE_COLOUR('',#270441); +#281874 = OVER_RIDING_STYLED_ITEM('overriding color',(#281875),#62321, + #281487); +#281875 = PRESENTATION_STYLE_ASSIGNMENT((#281876)); +#281876 = SURFACE_STYLE_USAGE(.BOTH.,#281877); +#281877 = SURFACE_SIDE_STYLE('',(#281878)); +#281878 = SURFACE_STYLE_FILL_AREA(#281879); +#281879 = FILL_AREA_STYLE('',(#281880)); +#281880 = FILL_AREA_STYLE_COLOUR('',#270441); +#281881 = OVER_RIDING_STYLED_ITEM('overriding color',(#281882),#62371, + #281487); +#281882 = PRESENTATION_STYLE_ASSIGNMENT((#281883)); +#281883 = SURFACE_STYLE_USAGE(.BOTH.,#281884); +#281884 = SURFACE_SIDE_STYLE('',(#281885)); +#281885 = SURFACE_STYLE_FILL_AREA(#281886); +#281886 = FILL_AREA_STYLE('',(#281887)); +#281887 = FILL_AREA_STYLE_COLOUR('',#270441); +#281888 = OVER_RIDING_STYLED_ITEM('overriding color',(#281889),#62421, + #281487); +#281889 = PRESENTATION_STYLE_ASSIGNMENT((#281890)); +#281890 = SURFACE_STYLE_USAGE(.BOTH.,#281891); +#281891 = SURFACE_SIDE_STYLE('',(#281892)); +#281892 = SURFACE_STYLE_FILL_AREA(#281893); +#281893 = FILL_AREA_STYLE('',(#281894)); +#281894 = FILL_AREA_STYLE_COLOUR('',#270441); +#281895 = OVER_RIDING_STYLED_ITEM('overriding color',(#281896),#62452, + #281487); +#281896 = PRESENTATION_STYLE_ASSIGNMENT((#281897)); +#281897 = SURFACE_STYLE_USAGE(.BOTH.,#281898); +#281898 = SURFACE_SIDE_STYLE('',(#281899)); +#281899 = SURFACE_STYLE_FILL_AREA(#281900); +#281900 = FILL_AREA_STYLE('',(#281901)); +#281901 = FILL_AREA_STYLE_COLOUR('',#270441); +#281902 = OVER_RIDING_STYLED_ITEM('overriding color',(#281903),#62483, + #281487); +#281903 = PRESENTATION_STYLE_ASSIGNMENT((#281904)); +#281904 = SURFACE_STYLE_USAGE(.BOTH.,#281905); +#281905 = SURFACE_SIDE_STYLE('',(#281906)); +#281906 = SURFACE_STYLE_FILL_AREA(#281907); +#281907 = FILL_AREA_STYLE('',(#281908)); +#281908 = FILL_AREA_STYLE_COLOUR('',#270441); +#281909 = OVER_RIDING_STYLED_ITEM('overriding color',(#281910),#62533, + #281487); +#281910 = PRESENTATION_STYLE_ASSIGNMENT((#281911)); +#281911 = SURFACE_STYLE_USAGE(.BOTH.,#281912); +#281912 = SURFACE_SIDE_STYLE('',(#281913)); +#281913 = SURFACE_STYLE_FILL_AREA(#281914); +#281914 = FILL_AREA_STYLE('',(#281915)); +#281915 = FILL_AREA_STYLE_COLOUR('',#270441); +#281916 = OVER_RIDING_STYLED_ITEM('overriding color',(#281917),#62583, + #281487); +#281917 = PRESENTATION_STYLE_ASSIGNMENT((#281918)); +#281918 = SURFACE_STYLE_USAGE(.BOTH.,#281919); +#281919 = SURFACE_SIDE_STYLE('',(#281920)); +#281920 = SURFACE_STYLE_FILL_AREA(#281921); +#281921 = FILL_AREA_STYLE('',(#281922)); +#281922 = FILL_AREA_STYLE_COLOUR('',#270441); +#281923 = OVER_RIDING_STYLED_ITEM('overriding color',(#281924),#62602, + #281487); +#281924 = PRESENTATION_STYLE_ASSIGNMENT((#281925)); +#281925 = SURFACE_STYLE_USAGE(.BOTH.,#281926); +#281926 = SURFACE_SIDE_STYLE('',(#281927)); +#281927 = SURFACE_STYLE_FILL_AREA(#281928); +#281928 = FILL_AREA_STYLE('',(#281929)); +#281929 = FILL_AREA_STYLE_COLOUR('',#270441); +#281930 = OVER_RIDING_STYLED_ITEM('overriding color',(#281931),#62619, + #281487); +#281931 = PRESENTATION_STYLE_ASSIGNMENT((#281932)); +#281932 = SURFACE_STYLE_USAGE(.BOTH.,#281933); +#281933 = SURFACE_SIDE_STYLE('',(#281934)); +#281934 = SURFACE_STYLE_FILL_AREA(#281935); +#281935 = FILL_AREA_STYLE('',(#281936)); +#281936 = FILL_AREA_STYLE_COLOUR('',#270441); +#281937 = OVER_RIDING_STYLED_ITEM('overriding color',(#281938),#62644, + #281487); +#281938 = PRESENTATION_STYLE_ASSIGNMENT((#281939)); +#281939 = SURFACE_STYLE_USAGE(.BOTH.,#281940); +#281940 = SURFACE_SIDE_STYLE('',(#281941)); +#281941 = SURFACE_STYLE_FILL_AREA(#281942); +#281942 = FILL_AREA_STYLE('',(#281943)); +#281943 = FILL_AREA_STYLE_COLOUR('',#270441); +#281944 = OVER_RIDING_STYLED_ITEM('overriding color',(#281945),#62669, + #281487); +#281945 = PRESENTATION_STYLE_ASSIGNMENT((#281946)); +#281946 = SURFACE_STYLE_USAGE(.BOTH.,#281947); +#281947 = SURFACE_SIDE_STYLE('',(#281948)); +#281948 = SURFACE_STYLE_FILL_AREA(#281949); +#281949 = FILL_AREA_STYLE('',(#281950)); +#281950 = FILL_AREA_STYLE_COLOUR('',#270441); +#281951 = OVER_RIDING_STYLED_ITEM('overriding color',(#281952),#62718, + #281487); +#281952 = PRESENTATION_STYLE_ASSIGNMENT((#281953)); +#281953 = SURFACE_STYLE_USAGE(.BOTH.,#281954); +#281954 = SURFACE_SIDE_STYLE('',(#281955)); +#281955 = SURFACE_STYLE_FILL_AREA(#281956); +#281956 = FILL_AREA_STYLE('',(#281957)); +#281957 = FILL_AREA_STYLE_COLOUR('',#270441); +#281958 = OVER_RIDING_STYLED_ITEM('overriding color',(#281959),#62735, + #281487); +#281959 = PRESENTATION_STYLE_ASSIGNMENT((#281960)); +#281960 = SURFACE_STYLE_USAGE(.BOTH.,#281961); +#281961 = SURFACE_SIDE_STYLE('',(#281962)); +#281962 = SURFACE_STYLE_FILL_AREA(#281963); +#281963 = FILL_AREA_STYLE('',(#281964)); +#281964 = FILL_AREA_STYLE_COLOUR('',#270441); +#281965 = OVER_RIDING_STYLED_ITEM('overriding color',(#281966),#62759, + #281487); +#281966 = PRESENTATION_STYLE_ASSIGNMENT((#281967)); +#281967 = SURFACE_STYLE_USAGE(.BOTH.,#281968); +#281968 = SURFACE_SIDE_STYLE('',(#281969)); +#281969 = SURFACE_STYLE_FILL_AREA(#281970); +#281970 = FILL_AREA_STYLE('',(#281971)); +#281971 = FILL_AREA_STYLE_COLOUR('',#270441); +#281972 = OVER_RIDING_STYLED_ITEM('overriding color',(#281973),#62776, + #281487); +#281973 = PRESENTATION_STYLE_ASSIGNMENT((#281974)); +#281974 = SURFACE_STYLE_USAGE(.BOTH.,#281975); +#281975 = SURFACE_SIDE_STYLE('',(#281976)); +#281976 = SURFACE_STYLE_FILL_AREA(#281977); +#281977 = FILL_AREA_STYLE('',(#281978)); +#281978 = FILL_AREA_STYLE_COLOUR('',#270441); +#281979 = OVER_RIDING_STYLED_ITEM('overriding color',(#281980),#62800, + #281487); +#281980 = PRESENTATION_STYLE_ASSIGNMENT((#281981)); +#281981 = SURFACE_STYLE_USAGE(.BOTH.,#281982); +#281982 = SURFACE_SIDE_STYLE('',(#281983)); +#281983 = SURFACE_STYLE_FILL_AREA(#281984); +#281984 = FILL_AREA_STYLE('',(#281985)); +#281985 = FILL_AREA_STYLE_COLOUR('',#270441); +#281986 = OVER_RIDING_STYLED_ITEM('overriding color',(#281987),#62825, + #281487); +#281987 = PRESENTATION_STYLE_ASSIGNMENT((#281988)); +#281988 = SURFACE_STYLE_USAGE(.BOTH.,#281989); +#281989 = SURFACE_SIDE_STYLE('',(#281990)); +#281990 = SURFACE_STYLE_FILL_AREA(#281991); +#281991 = FILL_AREA_STYLE('',(#281992)); +#281992 = FILL_AREA_STYLE_COLOUR('',#270441); +#281993 = OVER_RIDING_STYLED_ITEM('overriding color',(#281994),#62849, + #281487); +#281994 = PRESENTATION_STYLE_ASSIGNMENT((#281995)); +#281995 = SURFACE_STYLE_USAGE(.BOTH.,#281996); +#281996 = SURFACE_SIDE_STYLE('',(#281997)); +#281997 = SURFACE_STYLE_FILL_AREA(#281998); +#281998 = FILL_AREA_STYLE('',(#281999)); +#281999 = FILL_AREA_STYLE_COLOUR('',#270441); +#282000 = OVER_RIDING_STYLED_ITEM('overriding color',(#282001),#62867, + #281487); +#282001 = PRESENTATION_STYLE_ASSIGNMENT((#282002)); +#282002 = SURFACE_STYLE_USAGE(.BOTH.,#282003); +#282003 = SURFACE_SIDE_STYLE('',(#282004)); +#282004 = SURFACE_STYLE_FILL_AREA(#282005); +#282005 = FILL_AREA_STYLE('',(#282006)); +#282006 = FILL_AREA_STYLE_COLOUR('',#270441); +#282007 = OVER_RIDING_STYLED_ITEM('overriding color',(#282008),#62889, + #281487); +#282008 = PRESENTATION_STYLE_ASSIGNMENT((#282009)); +#282009 = SURFACE_STYLE_USAGE(.BOTH.,#282010); +#282010 = SURFACE_SIDE_STYLE('',(#282011)); +#282011 = SURFACE_STYLE_FILL_AREA(#282012); +#282012 = FILL_AREA_STYLE('',(#282013)); +#282013 = FILL_AREA_STYLE_COLOUR('',#270441); +#282014 = OVER_RIDING_STYLED_ITEM('overriding color',(#282015),#62901, + #281487); +#282015 = PRESENTATION_STYLE_ASSIGNMENT((#282016)); +#282016 = SURFACE_STYLE_USAGE(.BOTH.,#282017); +#282017 = SURFACE_SIDE_STYLE('',(#282018)); +#282018 = SURFACE_STYLE_FILL_AREA(#282019); +#282019 = FILL_AREA_STYLE('',(#282020)); +#282020 = FILL_AREA_STYLE_COLOUR('',#270441); +#282021 = OVER_RIDING_STYLED_ITEM('overriding color',(#282022),#62913, + #281487); +#282022 = PRESENTATION_STYLE_ASSIGNMENT((#282023)); +#282023 = SURFACE_STYLE_USAGE(.BOTH.,#282024); +#282024 = SURFACE_SIDE_STYLE('',(#282025)); +#282025 = SURFACE_STYLE_FILL_AREA(#282026); +#282026 = FILL_AREA_STYLE('',(#282027)); +#282027 = FILL_AREA_STYLE_COLOUR('',#270441); +#282028 = OVER_RIDING_STYLED_ITEM('overriding color',(#282029),#62935, + #281487); +#282029 = PRESENTATION_STYLE_ASSIGNMENT((#282030)); +#282030 = SURFACE_STYLE_USAGE(.BOTH.,#282031); +#282031 = SURFACE_SIDE_STYLE('',(#282032)); +#282032 = SURFACE_STYLE_FILL_AREA(#282033); +#282033 = FILL_AREA_STYLE('',(#282034)); +#282034 = FILL_AREA_STYLE_COLOUR('',#270441); +#282035 = OVER_RIDING_STYLED_ITEM('overriding color',(#282036),#62947, + #281487); +#282036 = PRESENTATION_STYLE_ASSIGNMENT((#282037)); +#282037 = SURFACE_STYLE_USAGE(.BOTH.,#282038); +#282038 = SURFACE_SIDE_STYLE('',(#282039)); +#282039 = SURFACE_STYLE_FILL_AREA(#282040); +#282040 = FILL_AREA_STYLE('',(#282041)); +#282041 = FILL_AREA_STYLE_COLOUR('',#270441); +#282042 = OVER_RIDING_STYLED_ITEM('overriding color',(#282043),#63048, + #281487); +#282043 = PRESENTATION_STYLE_ASSIGNMENT((#282044)); +#282044 = SURFACE_STYLE_USAGE(.BOTH.,#282045); +#282045 = SURFACE_SIDE_STYLE('',(#282046)); +#282046 = SURFACE_STYLE_FILL_AREA(#282047); +#282047 = FILL_AREA_STYLE('',(#282048)); +#282048 = FILL_AREA_STYLE_COLOUR('',#270441); +#282049 = OVER_RIDING_STYLED_ITEM('overriding color',(#282050),#63079, + #281487); +#282050 = PRESENTATION_STYLE_ASSIGNMENT((#282051)); +#282051 = SURFACE_STYLE_USAGE(.BOTH.,#282052); +#282052 = SURFACE_SIDE_STYLE('',(#282053)); +#282053 = SURFACE_STYLE_FILL_AREA(#282054); +#282054 = FILL_AREA_STYLE('',(#282055)); +#282055 = FILL_AREA_STYLE_COLOUR('',#270441); +#282056 = OVER_RIDING_STYLED_ITEM('overriding color',(#282057),#63180, + #281487); +#282057 = PRESENTATION_STYLE_ASSIGNMENT((#282058)); +#282058 = SURFACE_STYLE_USAGE(.BOTH.,#282059); +#282059 = SURFACE_SIDE_STYLE('',(#282060)); +#282060 = SURFACE_STYLE_FILL_AREA(#282061); +#282061 = FILL_AREA_STYLE('',(#282062)); +#282062 = FILL_AREA_STYLE_COLOUR('',#270441); +#282063 = OVER_RIDING_STYLED_ITEM('overriding color',(#282064),#63192, + #281487); +#282064 = PRESENTATION_STYLE_ASSIGNMENT((#282065)); +#282065 = SURFACE_STYLE_USAGE(.BOTH.,#282066); +#282066 = SURFACE_SIDE_STYLE('',(#282067)); +#282067 = SURFACE_STYLE_FILL_AREA(#282068); +#282068 = FILL_AREA_STYLE('',(#282069)); +#282069 = FILL_AREA_STYLE_COLOUR('',#270441); +#282070 = OVER_RIDING_STYLED_ITEM('overriding color',(#282071),#63223, + #281487); +#282071 = PRESENTATION_STYLE_ASSIGNMENT((#282072)); +#282072 = SURFACE_STYLE_USAGE(.BOTH.,#282073); +#282073 = SURFACE_SIDE_STYLE('',(#282074)); +#282074 = SURFACE_STYLE_FILL_AREA(#282075); +#282075 = FILL_AREA_STYLE('',(#282076)); +#282076 = FILL_AREA_STYLE_COLOUR('',#270441); +#282077 = OVER_RIDING_STYLED_ITEM('overriding color',(#282078),#63281, + #281487); +#282078 = PRESENTATION_STYLE_ASSIGNMENT((#282079)); +#282079 = SURFACE_STYLE_USAGE(.BOTH.,#282080); +#282080 = SURFACE_SIDE_STYLE('',(#282081)); +#282081 = SURFACE_STYLE_FILL_AREA(#282082); +#282082 = FILL_AREA_STYLE('',(#282083)); +#282083 = FILL_AREA_STYLE_COLOUR('',#270441); +#282084 = OVER_RIDING_STYLED_ITEM('overriding color',(#282085),#63316, + #281487); +#282085 = PRESENTATION_STYLE_ASSIGNMENT((#282086)); +#282086 = SURFACE_STYLE_USAGE(.BOTH.,#282087); +#282087 = SURFACE_SIDE_STYLE('',(#282088)); +#282088 = SURFACE_STYLE_FILL_AREA(#282089); +#282089 = FILL_AREA_STYLE('',(#282090)); +#282090 = FILL_AREA_STYLE_COLOUR('',#270441); +#282091 = OVER_RIDING_STYLED_ITEM('overriding color',(#282092),#63333, + #281487); +#282092 = PRESENTATION_STYLE_ASSIGNMENT((#282093)); +#282093 = SURFACE_STYLE_USAGE(.BOTH.,#282094); +#282094 = SURFACE_SIDE_STYLE('',(#282095)); +#282095 = SURFACE_STYLE_FILL_AREA(#282096); +#282096 = FILL_AREA_STYLE('',(#282097)); +#282097 = FILL_AREA_STYLE_COLOUR('',#270441); +#282098 = OVER_RIDING_STYLED_ITEM('overriding color',(#282099),#63350, + #281487); +#282099 = PRESENTATION_STYLE_ASSIGNMENT((#282100)); +#282100 = SURFACE_STYLE_USAGE(.BOTH.,#282101); +#282101 = SURFACE_SIDE_STYLE('',(#282102)); +#282102 = SURFACE_STYLE_FILL_AREA(#282103); +#282103 = FILL_AREA_STYLE('',(#282104)); +#282104 = FILL_AREA_STYLE_COLOUR('',#270441); +#282105 = OVER_RIDING_STYLED_ITEM('overriding color',(#282106),#63379, + #281487); +#282106 = PRESENTATION_STYLE_ASSIGNMENT((#282107)); +#282107 = SURFACE_STYLE_USAGE(.BOTH.,#282108); +#282108 = SURFACE_SIDE_STYLE('',(#282109)); +#282109 = SURFACE_STYLE_FILL_AREA(#282110); +#282110 = FILL_AREA_STYLE('',(#282111)); +#282111 = FILL_AREA_STYLE_COLOUR('',#270441); +#282112 = OVER_RIDING_STYLED_ITEM('overriding color',(#282113),#63408, + #281487); +#282113 = PRESENTATION_STYLE_ASSIGNMENT((#282114)); +#282114 = SURFACE_STYLE_USAGE(.BOTH.,#282115); +#282115 = SURFACE_SIDE_STYLE('',(#282116)); +#282116 = SURFACE_STYLE_FILL_AREA(#282117); +#282117 = FILL_AREA_STYLE('',(#282118)); +#282118 = FILL_AREA_STYLE_COLOUR('',#270441); +#282119 = OVER_RIDING_STYLED_ITEM('overriding color',(#282120),#63425, + #281487); +#282120 = PRESENTATION_STYLE_ASSIGNMENT((#282121)); +#282121 = SURFACE_STYLE_USAGE(.BOTH.,#282122); +#282122 = SURFACE_SIDE_STYLE('',(#282123)); +#282123 = SURFACE_STYLE_FILL_AREA(#282124); +#282124 = FILL_AREA_STYLE('',(#282125)); +#282125 = FILL_AREA_STYLE_COLOUR('',#270441); +#282126 = OVER_RIDING_STYLED_ITEM('overriding color',(#282127),#63442, + #281487); +#282127 = PRESENTATION_STYLE_ASSIGNMENT((#282128)); +#282128 = SURFACE_STYLE_USAGE(.BOTH.,#282129); +#282129 = SURFACE_SIDE_STYLE('',(#282130)); +#282130 = SURFACE_STYLE_FILL_AREA(#282131); +#282131 = FILL_AREA_STYLE('',(#282132)); +#282132 = FILL_AREA_STYLE_COLOUR('',#270441); +#282133 = OVER_RIDING_STYLED_ITEM('overriding color',(#282134),#63465, + #281487); +#282134 = PRESENTATION_STYLE_ASSIGNMENT((#282135)); +#282135 = SURFACE_STYLE_USAGE(.BOTH.,#282136); +#282136 = SURFACE_SIDE_STYLE('',(#282137)); +#282137 = SURFACE_STYLE_FILL_AREA(#282138); +#282138 = FILL_AREA_STYLE('',(#282139)); +#282139 = FILL_AREA_STYLE_COLOUR('',#270441); +#282140 = OVER_RIDING_STYLED_ITEM('overriding color',(#282141),#63489, + #281487); +#282141 = PRESENTATION_STYLE_ASSIGNMENT((#282142)); +#282142 = SURFACE_STYLE_USAGE(.BOTH.,#282143); +#282143 = SURFACE_SIDE_STYLE('',(#282144)); +#282144 = SURFACE_STYLE_FILL_AREA(#282145); +#282145 = FILL_AREA_STYLE('',(#282146)); +#282146 = FILL_AREA_STYLE_COLOUR('',#270441); +#282147 = OVER_RIDING_STYLED_ITEM('overriding color',(#282148),#63513, + #281487); +#282148 = PRESENTATION_STYLE_ASSIGNMENT((#282149)); +#282149 = SURFACE_STYLE_USAGE(.BOTH.,#282150); +#282150 = SURFACE_SIDE_STYLE('',(#282151)); +#282151 = SURFACE_STYLE_FILL_AREA(#282152); +#282152 = FILL_AREA_STYLE('',(#282153)); +#282153 = FILL_AREA_STYLE_COLOUR('',#270441); +#282154 = OVER_RIDING_STYLED_ITEM('overriding color',(#282155),#63538, + #281487); +#282155 = PRESENTATION_STYLE_ASSIGNMENT((#282156)); +#282156 = SURFACE_STYLE_USAGE(.BOTH.,#282157); +#282157 = SURFACE_SIDE_STYLE('',(#282158)); +#282158 = SURFACE_STYLE_FILL_AREA(#282159); +#282159 = FILL_AREA_STYLE('',(#282160)); +#282160 = FILL_AREA_STYLE_COLOUR('',#270441); +#282161 = OVER_RIDING_STYLED_ITEM('overriding color',(#282162),#63562, + #281487); +#282162 = PRESENTATION_STYLE_ASSIGNMENT((#282163)); +#282163 = SURFACE_STYLE_USAGE(.BOTH.,#282164); +#282164 = SURFACE_SIDE_STYLE('',(#282165)); +#282165 = SURFACE_STYLE_FILL_AREA(#282166); +#282166 = FILL_AREA_STYLE('',(#282167)); +#282167 = FILL_AREA_STYLE_COLOUR('',#270441); +#282168 = OVER_RIDING_STYLED_ITEM('overriding color',(#282169),#63580, + #281487); +#282169 = PRESENTATION_STYLE_ASSIGNMENT((#282170)); +#282170 = SURFACE_STYLE_USAGE(.BOTH.,#282171); +#282171 = SURFACE_SIDE_STYLE('',(#282172)); +#282172 = SURFACE_STYLE_FILL_AREA(#282173); +#282173 = FILL_AREA_STYLE('',(#282174)); +#282174 = FILL_AREA_STYLE_COLOUR('',#270441); +#282175 = OVER_RIDING_STYLED_ITEM('overriding color',(#282176),#63594, + #281487); +#282176 = PRESENTATION_STYLE_ASSIGNMENT((#282177)); +#282177 = SURFACE_STYLE_USAGE(.BOTH.,#282178); +#282178 = SURFACE_SIDE_STYLE('',(#282179)); +#282179 = SURFACE_STYLE_FILL_AREA(#282180); +#282180 = FILL_AREA_STYLE('',(#282181)); +#282181 = FILL_AREA_STYLE_COLOUR('',#270441); +#282182 = OVER_RIDING_STYLED_ITEM('overriding color',(#282183),#63608, + #281487); +#282183 = PRESENTATION_STYLE_ASSIGNMENT((#282184)); +#282184 = SURFACE_STYLE_USAGE(.BOTH.,#282185); +#282185 = SURFACE_SIDE_STYLE('',(#282186)); +#282186 = SURFACE_STYLE_FILL_AREA(#282187); +#282187 = FILL_AREA_STYLE('',(#282188)); +#282188 = FILL_AREA_STYLE_COLOUR('',#270441); +#282189 = OVER_RIDING_STYLED_ITEM('overriding color',(#282190),#63630, + #281487); +#282190 = PRESENTATION_STYLE_ASSIGNMENT((#282191)); +#282191 = SURFACE_STYLE_USAGE(.BOTH.,#282192); +#282192 = SURFACE_SIDE_STYLE('',(#282193)); +#282193 = SURFACE_STYLE_FILL_AREA(#282194); +#282194 = FILL_AREA_STYLE('',(#282195)); +#282195 = FILL_AREA_STYLE_COLOUR('',#270441); +#282196 = OVER_RIDING_STYLED_ITEM('overriding color',(#282197),#63647, + #281487); +#282197 = PRESENTATION_STYLE_ASSIGNMENT((#282198)); +#282198 = SURFACE_STYLE_USAGE(.BOTH.,#282199); +#282199 = SURFACE_SIDE_STYLE('',(#282200)); +#282200 = SURFACE_STYLE_FILL_AREA(#282201); +#282201 = FILL_AREA_STYLE('',(#282202)); +#282202 = FILL_AREA_STYLE_COLOUR('',#270441); +#282203 = OVER_RIDING_STYLED_ITEM('overriding color',(#282204),#63671, + #281487); +#282204 = PRESENTATION_STYLE_ASSIGNMENT((#282205)); +#282205 = SURFACE_STYLE_USAGE(.BOTH.,#282206); +#282206 = SURFACE_SIDE_STYLE('',(#282207)); +#282207 = SURFACE_STYLE_FILL_AREA(#282208); +#282208 = FILL_AREA_STYLE('',(#282209)); +#282209 = FILL_AREA_STYLE_COLOUR('',#270441); +#282210 = OVER_RIDING_STYLED_ITEM('overriding color',(#282211),#63688, + #281487); +#282211 = PRESENTATION_STYLE_ASSIGNMENT((#282212)); +#282212 = SURFACE_STYLE_USAGE(.BOTH.,#282213); +#282213 = SURFACE_SIDE_STYLE('',(#282214)); +#282214 = SURFACE_STYLE_FILL_AREA(#282215); +#282215 = FILL_AREA_STYLE('',(#282216)); +#282216 = FILL_AREA_STYLE_COLOUR('',#270441); +#282217 = OVER_RIDING_STYLED_ITEM('overriding color',(#282218),#63705, + #281487); +#282218 = PRESENTATION_STYLE_ASSIGNMENT((#282219)); +#282219 = SURFACE_STYLE_USAGE(.BOTH.,#282220); +#282220 = SURFACE_SIDE_STYLE('',(#282221)); +#282221 = SURFACE_STYLE_FILL_AREA(#282222); +#282222 = FILL_AREA_STYLE('',(#282223)); +#282223 = FILL_AREA_STYLE_COLOUR('',#270441); +#282224 = OVER_RIDING_STYLED_ITEM('overriding color',(#282225),#63722, + #281487); +#282225 = PRESENTATION_STYLE_ASSIGNMENT((#282226)); +#282226 = SURFACE_STYLE_USAGE(.BOTH.,#282227); +#282227 = SURFACE_SIDE_STYLE('',(#282228)); +#282228 = SURFACE_STYLE_FILL_AREA(#282229); +#282229 = FILL_AREA_STYLE('',(#282230)); +#282230 = FILL_AREA_STYLE_COLOUR('',#270441); +#282231 = OVER_RIDING_STYLED_ITEM('overriding color',(#282232),#63739, + #281487); +#282232 = PRESENTATION_STYLE_ASSIGNMENT((#282233)); +#282233 = SURFACE_STYLE_USAGE(.BOTH.,#282234); +#282234 = SURFACE_SIDE_STYLE('',(#282235)); +#282235 = SURFACE_STYLE_FILL_AREA(#282236); +#282236 = FILL_AREA_STYLE('',(#282237)); +#282237 = FILL_AREA_STYLE_COLOUR('',#270441); +#282238 = OVER_RIDING_STYLED_ITEM('overriding color',(#282239),#63763, + #281487); +#282239 = PRESENTATION_STYLE_ASSIGNMENT((#282240)); +#282240 = SURFACE_STYLE_USAGE(.BOTH.,#282241); +#282241 = SURFACE_SIDE_STYLE('',(#282242)); +#282242 = SURFACE_STYLE_FILL_AREA(#282243); +#282243 = FILL_AREA_STYLE('',(#282244)); +#282244 = FILL_AREA_STYLE_COLOUR('',#270441); +#282245 = OVER_RIDING_STYLED_ITEM('overriding color',(#282246),#63780, + #281487); +#282246 = PRESENTATION_STYLE_ASSIGNMENT((#282247)); +#282247 = SURFACE_STYLE_USAGE(.BOTH.,#282248); +#282248 = SURFACE_SIDE_STYLE('',(#282249)); +#282249 = SURFACE_STYLE_FILL_AREA(#282250); +#282250 = FILL_AREA_STYLE('',(#282251)); +#282251 = FILL_AREA_STYLE_COLOUR('',#270441); +#282252 = OVER_RIDING_STYLED_ITEM('overriding color',(#282253),#63802, + #281487); +#282253 = PRESENTATION_STYLE_ASSIGNMENT((#282254)); +#282254 = SURFACE_STYLE_USAGE(.BOTH.,#282255); +#282255 = SURFACE_SIDE_STYLE('',(#282256)); +#282256 = SURFACE_STYLE_FILL_AREA(#282257); +#282257 = FILL_AREA_STYLE('',(#282258)); +#282258 = FILL_AREA_STYLE_COLOUR('',#270441); +#282259 = OVER_RIDING_STYLED_ITEM('overriding color',(#282260),#63814, + #281487); +#282260 = PRESENTATION_STYLE_ASSIGNMENT((#282261)); +#282261 = SURFACE_STYLE_USAGE(.BOTH.,#282262); +#282262 = SURFACE_SIDE_STYLE('',(#282263)); +#282263 = SURFACE_STYLE_FILL_AREA(#282264); +#282264 = FILL_AREA_STYLE('',(#282265)); +#282265 = FILL_AREA_STYLE_COLOUR('',#270441); +#282266 = OVER_RIDING_STYLED_ITEM('overriding color',(#282267),#63847, + #281487); +#282267 = PRESENTATION_STYLE_ASSIGNMENT((#282268)); +#282268 = SURFACE_STYLE_USAGE(.BOTH.,#282269); +#282269 = SURFACE_SIDE_STYLE('',(#282270)); +#282270 = SURFACE_STYLE_FILL_AREA(#282271); +#282271 = FILL_AREA_STYLE('',(#282272)); +#282272 = FILL_AREA_STYLE_COLOUR('',#270441); +#282273 = OVER_RIDING_STYLED_ITEM('overriding color',(#282274),#63871, + #281487); +#282274 = PRESENTATION_STYLE_ASSIGNMENT((#282275)); +#282275 = SURFACE_STYLE_USAGE(.BOTH.,#282276); +#282276 = SURFACE_SIDE_STYLE('',(#282277)); +#282277 = SURFACE_STYLE_FILL_AREA(#282278); +#282278 = FILL_AREA_STYLE('',(#282279)); +#282279 = FILL_AREA_STYLE_COLOUR('',#270441); +#282280 = OVER_RIDING_STYLED_ITEM('overriding color',(#282281),#63895, + #281487); +#282281 = PRESENTATION_STYLE_ASSIGNMENT((#282282)); +#282282 = SURFACE_STYLE_USAGE(.BOTH.,#282283); +#282283 = SURFACE_SIDE_STYLE('',(#282284)); +#282284 = SURFACE_STYLE_FILL_AREA(#282285); +#282285 = FILL_AREA_STYLE('',(#282286)); +#282286 = FILL_AREA_STYLE_COLOUR('',#270441); +#282287 = OVER_RIDING_STYLED_ITEM('overriding color',(#282288),#63928, + #281487); +#282288 = PRESENTATION_STYLE_ASSIGNMENT((#282289)); +#282289 = SURFACE_STYLE_USAGE(.BOTH.,#282290); +#282290 = SURFACE_SIDE_STYLE('',(#282291)); +#282291 = SURFACE_STYLE_FILL_AREA(#282292); +#282292 = FILL_AREA_STYLE('',(#282293)); +#282293 = FILL_AREA_STYLE_COLOUR('',#270441); +#282294 = OVER_RIDING_STYLED_ITEM('overriding color',(#282295),#63945, + #281487); +#282295 = PRESENTATION_STYLE_ASSIGNMENT((#282296)); +#282296 = SURFACE_STYLE_USAGE(.BOTH.,#282297); +#282297 = SURFACE_SIDE_STYLE('',(#282298)); +#282298 = SURFACE_STYLE_FILL_AREA(#282299); +#282299 = FILL_AREA_STYLE('',(#282300)); +#282300 = FILL_AREA_STYLE_COLOUR('',#270441); +#282301 = OVER_RIDING_STYLED_ITEM('overriding color',(#282302),#63970, + #281487); +#282302 = PRESENTATION_STYLE_ASSIGNMENT((#282303)); +#282303 = SURFACE_STYLE_USAGE(.BOTH.,#282304); +#282304 = SURFACE_SIDE_STYLE('',(#282305)); +#282305 = SURFACE_STYLE_FILL_AREA(#282306); +#282306 = FILL_AREA_STYLE('',(#282307)); +#282307 = FILL_AREA_STYLE_COLOUR('',#270441); +#282308 = OVER_RIDING_STYLED_ITEM('overriding color',(#282309),#63987, + #281487); +#282309 = PRESENTATION_STYLE_ASSIGNMENT((#282310)); +#282310 = SURFACE_STYLE_USAGE(.BOTH.,#282311); +#282311 = SURFACE_SIDE_STYLE('',(#282312)); +#282312 = SURFACE_STYLE_FILL_AREA(#282313); +#282313 = FILL_AREA_STYLE('',(#282314)); +#282314 = FILL_AREA_STYLE_COLOUR('',#270441); +#282315 = OVER_RIDING_STYLED_ITEM('overriding color',(#282316),#64012, + #281487); +#282316 = PRESENTATION_STYLE_ASSIGNMENT((#282317)); +#282317 = SURFACE_STYLE_USAGE(.BOTH.,#282318); +#282318 = SURFACE_SIDE_STYLE('',(#282319)); +#282319 = SURFACE_STYLE_FILL_AREA(#282320); +#282320 = FILL_AREA_STYLE('',(#282321)); +#282321 = FILL_AREA_STYLE_COLOUR('',#270441); +#282322 = OVER_RIDING_STYLED_ITEM('overriding color',(#282323),#64043, + #281487); +#282323 = PRESENTATION_STYLE_ASSIGNMENT((#282324)); +#282324 = SURFACE_STYLE_USAGE(.BOTH.,#282325); +#282325 = SURFACE_SIDE_STYLE('',(#282326)); +#282326 = SURFACE_STYLE_FILL_AREA(#282327); +#282327 = FILL_AREA_STYLE('',(#282328)); +#282328 = FILL_AREA_STYLE_COLOUR('',#270441); +#282329 = OVER_RIDING_STYLED_ITEM('overriding color',(#282330),#64068, + #281487); +#282330 = PRESENTATION_STYLE_ASSIGNMENT((#282331)); +#282331 = SURFACE_STYLE_USAGE(.BOTH.,#282332); +#282332 = SURFACE_SIDE_STYLE('',(#282333)); +#282333 = SURFACE_STYLE_FILL_AREA(#282334); +#282334 = FILL_AREA_STYLE('',(#282335)); +#282335 = FILL_AREA_STYLE_COLOUR('',#270441); +#282336 = OVER_RIDING_STYLED_ITEM('overriding color',(#282337),#64093, + #281487); +#282337 = PRESENTATION_STYLE_ASSIGNMENT((#282338)); +#282338 = SURFACE_STYLE_USAGE(.BOTH.,#282339); +#282339 = SURFACE_SIDE_STYLE('',(#282340)); +#282340 = SURFACE_STYLE_FILL_AREA(#282341); +#282341 = FILL_AREA_STYLE('',(#282342)); +#282342 = FILL_AREA_STYLE_COLOUR('',#270441); +#282343 = OVER_RIDING_STYLED_ITEM('overriding color',(#282344),#64124, + #281487); +#282344 = PRESENTATION_STYLE_ASSIGNMENT((#282345)); +#282345 = SURFACE_STYLE_USAGE(.BOTH.,#282346); +#282346 = SURFACE_SIDE_STYLE('',(#282347)); +#282347 = SURFACE_STYLE_FILL_AREA(#282348); +#282348 = FILL_AREA_STYLE('',(#282349)); +#282349 = FILL_AREA_STYLE_COLOUR('',#270441); +#282350 = OVER_RIDING_STYLED_ITEM('overriding color',(#282351),#64141, + #281487); +#282351 = PRESENTATION_STYLE_ASSIGNMENT((#282352)); +#282352 = SURFACE_STYLE_USAGE(.BOTH.,#282353); +#282353 = SURFACE_SIDE_STYLE('',(#282354)); +#282354 = SURFACE_STYLE_FILL_AREA(#282355); +#282355 = FILL_AREA_STYLE('',(#282356)); +#282356 = FILL_AREA_STYLE_COLOUR('',#270441); +#282357 = OVER_RIDING_STYLED_ITEM('overriding color',(#282358),#64183, + #281487); +#282358 = PRESENTATION_STYLE_ASSIGNMENT((#282359)); +#282359 = SURFACE_STYLE_USAGE(.BOTH.,#282360); +#282360 = SURFACE_SIDE_STYLE('',(#282361)); +#282361 = SURFACE_STYLE_FILL_AREA(#282362); +#282362 = FILL_AREA_STYLE('',(#282363)); +#282363 = FILL_AREA_STYLE_COLOUR('',#270441); +#282364 = OVER_RIDING_STYLED_ITEM('overriding color',(#282365),#64200, + #281487); +#282365 = PRESENTATION_STYLE_ASSIGNMENT((#282366)); +#282366 = SURFACE_STYLE_USAGE(.BOTH.,#282367); +#282367 = SURFACE_SIDE_STYLE('',(#282368)); +#282368 = SURFACE_STYLE_FILL_AREA(#282369); +#282369 = FILL_AREA_STYLE('',(#282370)); +#282370 = FILL_AREA_STYLE_COLOUR('',#270441); +#282371 = OVER_RIDING_STYLED_ITEM('overriding color',(#282372),#64242, + #281487); +#282372 = PRESENTATION_STYLE_ASSIGNMENT((#282373)); +#282373 = SURFACE_STYLE_USAGE(.BOTH.,#282374); +#282374 = SURFACE_SIDE_STYLE('',(#282375)); +#282375 = SURFACE_STYLE_FILL_AREA(#282376); +#282376 = FILL_AREA_STYLE('',(#282377)); +#282377 = FILL_AREA_STYLE_COLOUR('',#270441); +#282378 = OVER_RIDING_STYLED_ITEM('overriding color',(#282379),#64267, + #281487); +#282379 = PRESENTATION_STYLE_ASSIGNMENT((#282380)); +#282380 = SURFACE_STYLE_USAGE(.BOTH.,#282381); +#282381 = SURFACE_SIDE_STYLE('',(#282382)); +#282382 = SURFACE_STYLE_FILL_AREA(#282383); +#282383 = FILL_AREA_STYLE('',(#282384)); +#282384 = FILL_AREA_STYLE_COLOUR('',#270441); +#282385 = OVER_RIDING_STYLED_ITEM('overriding color',(#282386),#64301, + #281487); +#282386 = PRESENTATION_STYLE_ASSIGNMENT((#282387)); +#282387 = SURFACE_STYLE_USAGE(.BOTH.,#282388); +#282388 = SURFACE_SIDE_STYLE('',(#282389)); +#282389 = SURFACE_STYLE_FILL_AREA(#282390); +#282390 = FILL_AREA_STYLE('',(#282391)); +#282391 = FILL_AREA_STYLE_COLOUR('',#270441); +#282392 = OVER_RIDING_STYLED_ITEM('overriding color',(#282393),#64343, + #281487); +#282393 = PRESENTATION_STYLE_ASSIGNMENT((#282394)); +#282394 = SURFACE_STYLE_USAGE(.BOTH.,#282395); +#282395 = SURFACE_SIDE_STYLE('',(#282396)); +#282396 = SURFACE_STYLE_FILL_AREA(#282397); +#282397 = FILL_AREA_STYLE('',(#282398)); +#282398 = FILL_AREA_STYLE_COLOUR('',#270441); +#282399 = OVER_RIDING_STYLED_ITEM('overriding color',(#282400),#64360, + #281487); +#282400 = PRESENTATION_STYLE_ASSIGNMENT((#282401)); +#282401 = SURFACE_STYLE_USAGE(.BOTH.,#282402); +#282402 = SURFACE_SIDE_STYLE('',(#282403)); +#282403 = SURFACE_STYLE_FILL_AREA(#282404); +#282404 = FILL_AREA_STYLE('',(#282405)); +#282405 = FILL_AREA_STYLE_COLOUR('',#270441); +#282406 = OVER_RIDING_STYLED_ITEM('overriding color',(#282407),#64377, + #281487); +#282407 = PRESENTATION_STYLE_ASSIGNMENT((#282408)); +#282408 = SURFACE_STYLE_USAGE(.BOTH.,#282409); +#282409 = SURFACE_SIDE_STYLE('',(#282410)); +#282410 = SURFACE_STYLE_FILL_AREA(#282411); +#282411 = FILL_AREA_STYLE('',(#282412)); +#282412 = FILL_AREA_STYLE_COLOUR('',#270441); +#282413 = OVER_RIDING_STYLED_ITEM('overriding color',(#282414),#64394, + #281487); +#282414 = PRESENTATION_STYLE_ASSIGNMENT((#282415)); +#282415 = SURFACE_STYLE_USAGE(.BOTH.,#282416); +#282416 = SURFACE_SIDE_STYLE('',(#282417)); +#282417 = SURFACE_STYLE_FILL_AREA(#282418); +#282418 = FILL_AREA_STYLE('',(#282419)); +#282419 = FILL_AREA_STYLE_COLOUR('',#270441); +#282420 = OVER_RIDING_STYLED_ITEM('overriding color',(#282421),#64406, + #281487); +#282421 = PRESENTATION_STYLE_ASSIGNMENT((#282422)); +#282422 = SURFACE_STYLE_USAGE(.BOTH.,#282423); +#282423 = SURFACE_SIDE_STYLE('',(#282424)); +#282424 = SURFACE_STYLE_FILL_AREA(#282425); +#282425 = FILL_AREA_STYLE('',(#282426)); +#282426 = FILL_AREA_STYLE_COLOUR('',#270441); +#282427 = OVER_RIDING_STYLED_ITEM('overriding color',(#282428),#64423, + #281487); +#282428 = PRESENTATION_STYLE_ASSIGNMENT((#282429)); +#282429 = SURFACE_STYLE_USAGE(.BOTH.,#282430); +#282430 = SURFACE_SIDE_STYLE('',(#282431)); +#282431 = SURFACE_STYLE_FILL_AREA(#282432); +#282432 = FILL_AREA_STYLE('',(#282433)); +#282433 = FILL_AREA_STYLE_COLOUR('',#270441); +#282434 = OVER_RIDING_STYLED_ITEM('overriding color',(#282435),#64440, + #281487); +#282435 = PRESENTATION_STYLE_ASSIGNMENT((#282436)); +#282436 = SURFACE_STYLE_USAGE(.BOTH.,#282437); +#282437 = SURFACE_SIDE_STYLE('',(#282438)); +#282438 = SURFACE_STYLE_FILL_AREA(#282439); +#282439 = FILL_AREA_STYLE('',(#282440)); +#282440 = FILL_AREA_STYLE_COLOUR('',#270441); +#282441 = STYLED_ITEM('color',(#282442),#64452); +#282442 = PRESENTATION_STYLE_ASSIGNMENT((#282443,#282448)); +#282443 = SURFACE_STYLE_USAGE(.BOTH.,#282444); +#282444 = SURFACE_SIDE_STYLE('',(#282445)); +#282445 = SURFACE_STYLE_FILL_AREA(#282446); +#282446 = FILL_AREA_STYLE('',(#282447)); +#282447 = FILL_AREA_STYLE_COLOUR('',#281104); +#282448 = CURVE_STYLE('',#282449,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#282449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282450 = OVER_RIDING_STYLED_ITEM('overriding color',(#282451),#64454, + #282441); +#282451 = PRESENTATION_STYLE_ASSIGNMENT((#282452)); +#282452 = SURFACE_STYLE_USAGE(.BOTH.,#282453); +#282453 = SURFACE_SIDE_STYLE('',(#282454)); +#282454 = SURFACE_STYLE_FILL_AREA(#282455); +#282455 = FILL_AREA_STYLE('',(#282456)); +#282456 = FILL_AREA_STYLE_COLOUR('',#270441); +#282457 = OVER_RIDING_STYLED_ITEM('overriding color',(#282458),#64494, + #282441); +#282458 = PRESENTATION_STYLE_ASSIGNMENT((#282459)); +#282459 = SURFACE_STYLE_USAGE(.BOTH.,#282460); +#282460 = SURFACE_SIDE_STYLE('',(#282461)); +#282461 = SURFACE_STYLE_FILL_AREA(#282462); +#282462 = FILL_AREA_STYLE('',(#282463)); +#282463 = FILL_AREA_STYLE_COLOUR('',#270441); +#282464 = OVER_RIDING_STYLED_ITEM('overriding color',(#282465),#64575, + #282441); +#282465 = PRESENTATION_STYLE_ASSIGNMENT((#282466)); +#282466 = SURFACE_STYLE_USAGE(.BOTH.,#282467); +#282467 = SURFACE_SIDE_STYLE('',(#282468)); +#282468 = SURFACE_STYLE_FILL_AREA(#282469); +#282469 = FILL_AREA_STYLE('',(#282470)); +#282470 = FILL_AREA_STYLE_COLOUR('',#270441); +#282471 = OVER_RIDING_STYLED_ITEM('overriding color',(#282472),#64600, + #282441); +#282472 = PRESENTATION_STYLE_ASSIGNMENT((#282473)); +#282473 = SURFACE_STYLE_USAGE(.BOTH.,#282474); +#282474 = SURFACE_SIDE_STYLE('',(#282475)); +#282475 = SURFACE_STYLE_FILL_AREA(#282476); +#282476 = FILL_AREA_STYLE('',(#282477)); +#282477 = FILL_AREA_STYLE_COLOUR('',#270441); +#282478 = OVER_RIDING_STYLED_ITEM('overriding color',(#282479),#64624, + #282441); +#282479 = PRESENTATION_STYLE_ASSIGNMENT((#282480)); +#282480 = SURFACE_STYLE_USAGE(.BOTH.,#282481); +#282481 = SURFACE_SIDE_STYLE('',(#282482)); +#282482 = SURFACE_STYLE_FILL_AREA(#282483); +#282483 = FILL_AREA_STYLE('',(#282484)); +#282484 = FILL_AREA_STYLE_COLOUR('',#270441); +#282485 = OVER_RIDING_STYLED_ITEM('overriding color',(#282486),#64690, + #282441); +#282486 = PRESENTATION_STYLE_ASSIGNMENT((#282487)); +#282487 = SURFACE_STYLE_USAGE(.BOTH.,#282488); +#282488 = SURFACE_SIDE_STYLE('',(#282489)); +#282489 = SURFACE_STYLE_FILL_AREA(#282490); +#282490 = FILL_AREA_STYLE('',(#282491)); +#282491 = FILL_AREA_STYLE_COLOUR('',#270441); +#282492 = OVER_RIDING_STYLED_ITEM('overriding color',(#282493),#64707, + #282441); +#282493 = PRESENTATION_STYLE_ASSIGNMENT((#282494)); +#282494 = SURFACE_STYLE_USAGE(.BOTH.,#282495); +#282495 = SURFACE_SIDE_STYLE('',(#282496)); +#282496 = SURFACE_STYLE_FILL_AREA(#282497); +#282497 = FILL_AREA_STYLE('',(#282498)); +#282498 = FILL_AREA_STYLE_COLOUR('',#270441); +#282499 = OVER_RIDING_STYLED_ITEM('overriding color',(#282500),#64724, + #282441); +#282500 = PRESENTATION_STYLE_ASSIGNMENT((#282501)); +#282501 = SURFACE_STYLE_USAGE(.BOTH.,#282502); +#282502 = SURFACE_SIDE_STYLE('',(#282503)); +#282503 = SURFACE_STYLE_FILL_AREA(#282504); +#282504 = FILL_AREA_STYLE('',(#282505)); +#282505 = FILL_AREA_STYLE_COLOUR('',#270441); +#282506 = OVER_RIDING_STYLED_ITEM('overriding color',(#282507),#64741, + #282441); +#282507 = PRESENTATION_STYLE_ASSIGNMENT((#282508)); +#282508 = SURFACE_STYLE_USAGE(.BOTH.,#282509); +#282509 = SURFACE_SIDE_STYLE('',(#282510)); +#282510 = SURFACE_STYLE_FILL_AREA(#282511); +#282511 = FILL_AREA_STYLE('',(#282512)); +#282512 = FILL_AREA_STYLE_COLOUR('',#270441); +#282513 = OVER_RIDING_STYLED_ITEM('overriding color',(#282514),#64758, + #282441); +#282514 = PRESENTATION_STYLE_ASSIGNMENT((#282515)); +#282515 = SURFACE_STYLE_USAGE(.BOTH.,#282516); +#282516 = SURFACE_SIDE_STYLE('',(#282517)); +#282517 = SURFACE_STYLE_FILL_AREA(#282518); +#282518 = FILL_AREA_STYLE('',(#282519)); +#282519 = FILL_AREA_STYLE_COLOUR('',#270441); +#282520 = OVER_RIDING_STYLED_ITEM('overriding color',(#282521),#64775, + #282441); +#282521 = PRESENTATION_STYLE_ASSIGNMENT((#282522)); +#282522 = SURFACE_STYLE_USAGE(.BOTH.,#282523); +#282523 = SURFACE_SIDE_STYLE('',(#282524)); +#282524 = SURFACE_STYLE_FILL_AREA(#282525); +#282525 = FILL_AREA_STYLE('',(#282526)); +#282526 = FILL_AREA_STYLE_COLOUR('',#270441); +#282527 = OVER_RIDING_STYLED_ITEM('overriding color',(#282528),#64792, + #282441); +#282528 = PRESENTATION_STYLE_ASSIGNMENT((#282529)); +#282529 = SURFACE_STYLE_USAGE(.BOTH.,#282530); +#282530 = SURFACE_SIDE_STYLE('',(#282531)); +#282531 = SURFACE_STYLE_FILL_AREA(#282532); +#282532 = FILL_AREA_STYLE('',(#282533)); +#282533 = FILL_AREA_STYLE_COLOUR('',#270441); +#282534 = STYLED_ITEM('color',(#282535),#64804); +#282535 = PRESENTATION_STYLE_ASSIGNMENT((#282536,#282541)); +#282536 = SURFACE_STYLE_USAGE(.BOTH.,#282537); +#282537 = SURFACE_SIDE_STYLE('',(#282538)); +#282538 = SURFACE_STYLE_FILL_AREA(#282539); +#282539 = FILL_AREA_STYLE('',(#282540)); +#282540 = FILL_AREA_STYLE_COLOUR('',#281104); +#282541 = CURVE_STYLE('',#282542,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#282542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282543 = OVER_RIDING_STYLED_ITEM('overriding color',(#282544),#64806, + #282534); +#282544 = PRESENTATION_STYLE_ASSIGNMENT((#282545)); +#282545 = SURFACE_STYLE_USAGE(.BOTH.,#282546); +#282546 = SURFACE_SIDE_STYLE('',(#282547)); +#282547 = SURFACE_STYLE_FILL_AREA(#282548); +#282548 = FILL_AREA_STYLE('',(#282549)); +#282549 = FILL_AREA_STYLE_COLOUR('',#282550); +#282550 = COLOUR_RGB('',0.894999966383,0.890999961016,0.813000030345); +#282551 = OVER_RIDING_STYLED_ITEM('overriding color',(#282552),#64846, + #282534); +#282552 = PRESENTATION_STYLE_ASSIGNMENT((#282553)); +#282553 = SURFACE_STYLE_USAGE(.BOTH.,#282554); +#282554 = SURFACE_SIDE_STYLE('',(#282555)); +#282555 = SURFACE_STYLE_FILL_AREA(#282556); +#282556 = FILL_AREA_STYLE('',(#282557)); +#282557 = FILL_AREA_STYLE_COLOUR('',#282550); +#282558 = OVER_RIDING_STYLED_ITEM('overriding color',(#282559),#64913, + #282534); +#282559 = PRESENTATION_STYLE_ASSIGNMENT((#282560)); +#282560 = SURFACE_STYLE_USAGE(.BOTH.,#282561); +#282561 = SURFACE_SIDE_STYLE('',(#282562)); +#282562 = SURFACE_STYLE_FILL_AREA(#282563); +#282563 = FILL_AREA_STYLE('',(#282564)); +#282564 = FILL_AREA_STYLE_COLOUR('',#282550); +#282565 = OVER_RIDING_STYLED_ITEM('overriding color',(#282566),#64938, + #282534); +#282566 = PRESENTATION_STYLE_ASSIGNMENT((#282567)); +#282567 = SURFACE_STYLE_USAGE(.BOTH.,#282568); +#282568 = SURFACE_SIDE_STYLE('',(#282569)); +#282569 = SURFACE_STYLE_FILL_AREA(#282570); +#282570 = FILL_AREA_STYLE('',(#282571)); +#282571 = FILL_AREA_STYLE_COLOUR('',#282550); +#282572 = OVER_RIDING_STYLED_ITEM('overriding color',(#282573),#64963, + #282534); +#282573 = PRESENTATION_STYLE_ASSIGNMENT((#282574)); +#282574 = SURFACE_STYLE_USAGE(.BOTH.,#282575); +#282575 = SURFACE_SIDE_STYLE('',(#282576)); +#282576 = SURFACE_STYLE_FILL_AREA(#282577); +#282577 = FILL_AREA_STYLE('',(#282578)); +#282578 = FILL_AREA_STYLE_COLOUR('',#282550); +#282579 = OVER_RIDING_STYLED_ITEM('overriding color',(#282580),#64996, + #282534); +#282580 = PRESENTATION_STYLE_ASSIGNMENT((#282581)); +#282581 = SURFACE_STYLE_USAGE(.BOTH.,#282582); +#282582 = SURFACE_SIDE_STYLE('',(#282583)); +#282583 = SURFACE_STYLE_FILL_AREA(#282584); +#282584 = FILL_AREA_STYLE('',(#282585)); +#282585 = FILL_AREA_STYLE_COLOUR('',#282550); +#282586 = OVER_RIDING_STYLED_ITEM('overriding color',(#282587),#65020, + #282534); +#282587 = PRESENTATION_STYLE_ASSIGNMENT((#282588)); +#282588 = SURFACE_STYLE_USAGE(.BOTH.,#282589); +#282589 = SURFACE_SIDE_STYLE('',(#282590)); +#282590 = SURFACE_STYLE_FILL_AREA(#282591); +#282591 = FILL_AREA_STYLE('',(#282592)); +#282592 = FILL_AREA_STYLE_COLOUR('',#282550); +#282593 = OVER_RIDING_STYLED_ITEM('overriding color',(#282594),#65044, + #282534); +#282594 = PRESENTATION_STYLE_ASSIGNMENT((#282595)); +#282595 = SURFACE_STYLE_USAGE(.BOTH.,#282596); +#282596 = SURFACE_SIDE_STYLE('',(#282597)); +#282597 = SURFACE_STYLE_FILL_AREA(#282598); +#282598 = FILL_AREA_STYLE('',(#282599)); +#282599 = FILL_AREA_STYLE_COLOUR('',#282550); +#282600 = OVER_RIDING_STYLED_ITEM('overriding color',(#282601),#65069, + #282534); +#282601 = PRESENTATION_STYLE_ASSIGNMENT((#282602)); +#282602 = SURFACE_STYLE_USAGE(.BOTH.,#282603); +#282603 = SURFACE_SIDE_STYLE('',(#282604)); +#282604 = SURFACE_STYLE_FILL_AREA(#282605); +#282605 = FILL_AREA_STYLE('',(#282606)); +#282606 = FILL_AREA_STYLE_COLOUR('',#282550); +#282607 = OVER_RIDING_STYLED_ITEM('overriding color',(#282608),#65094, + #282534); +#282608 = PRESENTATION_STYLE_ASSIGNMENT((#282609)); +#282609 = SURFACE_STYLE_USAGE(.BOTH.,#282610); +#282610 = SURFACE_SIDE_STYLE('',(#282611)); +#282611 = SURFACE_STYLE_FILL_AREA(#282612); +#282612 = FILL_AREA_STYLE('',(#282613)); +#282613 = FILL_AREA_STYLE_COLOUR('',#282550); +#282614 = OVER_RIDING_STYLED_ITEM('overriding color',(#282615),#65111, + #282534); +#282615 = PRESENTATION_STYLE_ASSIGNMENT((#282616)); +#282616 = SURFACE_STYLE_USAGE(.BOTH.,#282617); +#282617 = SURFACE_SIDE_STYLE('',(#282618)); +#282618 = SURFACE_STYLE_FILL_AREA(#282619); +#282619 = FILL_AREA_STYLE('',(#282620)); +#282620 = FILL_AREA_STYLE_COLOUR('',#282550); +#282621 = OVER_RIDING_STYLED_ITEM('overriding color',(#282622),#65128, + #282534); +#282622 = PRESENTATION_STYLE_ASSIGNMENT((#282623)); +#282623 = SURFACE_STYLE_USAGE(.BOTH.,#282624); +#282624 = SURFACE_SIDE_STYLE('',(#282625)); +#282625 = SURFACE_STYLE_FILL_AREA(#282626); +#282626 = FILL_AREA_STYLE('',(#282627)); +#282627 = FILL_AREA_STYLE_COLOUR('',#282550); +#282628 = OVER_RIDING_STYLED_ITEM('overriding color',(#282629),#65145, + #282534); +#282629 = PRESENTATION_STYLE_ASSIGNMENT((#282630)); +#282630 = SURFACE_STYLE_USAGE(.BOTH.,#282631); +#282631 = SURFACE_SIDE_STYLE('',(#282632)); +#282632 = SURFACE_STYLE_FILL_AREA(#282633); +#282633 = FILL_AREA_STYLE('',(#282634)); +#282634 = FILL_AREA_STYLE_COLOUR('',#282550); +#282635 = OVER_RIDING_STYLED_ITEM('overriding color',(#282636),#65176, + #282534); +#282636 = PRESENTATION_STYLE_ASSIGNMENT((#282637)); +#282637 = SURFACE_STYLE_USAGE(.BOTH.,#282638); +#282638 = SURFACE_SIDE_STYLE('',(#282639)); +#282639 = SURFACE_STYLE_FILL_AREA(#282640); +#282640 = FILL_AREA_STYLE('',(#282641)); +#282641 = FILL_AREA_STYLE_COLOUR('',#282550); +#282642 = OVER_RIDING_STYLED_ITEM('overriding color',(#282643),#65194, + #282534); +#282643 = PRESENTATION_STYLE_ASSIGNMENT((#282644)); +#282644 = SURFACE_STYLE_USAGE(.BOTH.,#282645); +#282645 = SURFACE_SIDE_STYLE('',(#282646)); +#282646 = SURFACE_STYLE_FILL_AREA(#282647); +#282647 = FILL_AREA_STYLE('',(#282648)); +#282648 = FILL_AREA_STYLE_COLOUR('',#282550); +#282649 = OVER_RIDING_STYLED_ITEM('overriding color',(#282650),#65212, + #282534); +#282650 = PRESENTATION_STYLE_ASSIGNMENT((#282651)); +#282651 = SURFACE_STYLE_USAGE(.BOTH.,#282652); +#282652 = SURFACE_SIDE_STYLE('',(#282653)); +#282653 = SURFACE_STYLE_FILL_AREA(#282654); +#282654 = FILL_AREA_STYLE('',(#282655)); +#282655 = FILL_AREA_STYLE_COLOUR('',#282550); +#282656 = OVER_RIDING_STYLED_ITEM('overriding color',(#282657),#65229, + #282534); +#282657 = PRESENTATION_STYLE_ASSIGNMENT((#282658)); +#282658 = SURFACE_STYLE_USAGE(.BOTH.,#282659); +#282659 = SURFACE_SIDE_STYLE('',(#282660)); +#282660 = SURFACE_STYLE_FILL_AREA(#282661); +#282661 = FILL_AREA_STYLE('',(#282662)); +#282662 = FILL_AREA_STYLE_COLOUR('',#282550); +#282663 = OVER_RIDING_STYLED_ITEM('overriding color',(#282664),#65246, + #282534); +#282664 = PRESENTATION_STYLE_ASSIGNMENT((#282665)); +#282665 = SURFACE_STYLE_USAGE(.BOTH.,#282666); +#282666 = SURFACE_SIDE_STYLE('',(#282667)); +#282667 = SURFACE_STYLE_FILL_AREA(#282668); +#282668 = FILL_AREA_STYLE('',(#282669)); +#282669 = FILL_AREA_STYLE_COLOUR('',#282550); +#282670 = STYLED_ITEM('color',(#282671),#65258); +#282671 = PRESENTATION_STYLE_ASSIGNMENT((#282672,#282677)); +#282672 = SURFACE_STYLE_USAGE(.BOTH.,#282673); +#282673 = SURFACE_SIDE_STYLE('',(#282674)); +#282674 = SURFACE_STYLE_FILL_AREA(#282675); +#282675 = FILL_AREA_STYLE('',(#282676)); +#282676 = FILL_AREA_STYLE_COLOUR('',#281104); +#282677 = CURVE_STYLE('',#282678,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#282678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#282679 = OVER_RIDING_STYLED_ITEM('overriding color',(#282680),#65260, + #282670); +#282680 = PRESENTATION_STYLE_ASSIGNMENT((#282681)); +#282681 = SURFACE_STYLE_USAGE(.BOTH.,#282682); +#282682 = SURFACE_SIDE_STYLE('',(#282683)); +#282683 = SURFACE_STYLE_FILL_AREA(#282684); +#282684 = FILL_AREA_STYLE('',(#282685)); +#282685 = FILL_AREA_STYLE_COLOUR('',#270441); +#282686 = OVER_RIDING_STYLED_ITEM('overriding color',(#282687),#65300, + #282670); +#282687 = PRESENTATION_STYLE_ASSIGNMENT((#282688)); +#282688 = SURFACE_STYLE_USAGE(.BOTH.,#282689); +#282689 = SURFACE_SIDE_STYLE('',(#282690)); +#282690 = SURFACE_STYLE_FILL_AREA(#282691); +#282691 = FILL_AREA_STYLE('',(#282692)); +#282692 = FILL_AREA_STYLE_COLOUR('',#270441); +#282693 = OVER_RIDING_STYLED_ITEM('overriding color',(#282694),#65381, + #282670); +#282694 = PRESENTATION_STYLE_ASSIGNMENT((#282695)); +#282695 = SURFACE_STYLE_USAGE(.BOTH.,#282696); +#282696 = SURFACE_SIDE_STYLE('',(#282697)); +#282697 = SURFACE_STYLE_FILL_AREA(#282698); +#282698 = FILL_AREA_STYLE('',(#282699)); +#282699 = FILL_AREA_STYLE_COLOUR('',#270441); +#282700 = OVER_RIDING_STYLED_ITEM('overriding color',(#282701),#65406, + #282670); +#282701 = PRESENTATION_STYLE_ASSIGNMENT((#282702)); +#282702 = SURFACE_STYLE_USAGE(.BOTH.,#282703); +#282703 = SURFACE_SIDE_STYLE('',(#282704)); +#282704 = SURFACE_STYLE_FILL_AREA(#282705); +#282705 = FILL_AREA_STYLE('',(#282706)); +#282706 = FILL_AREA_STYLE_COLOUR('',#270441); +#282707 = OVER_RIDING_STYLED_ITEM('overriding color',(#282708),#65430, + #282670); +#282708 = PRESENTATION_STYLE_ASSIGNMENT((#282709)); +#282709 = SURFACE_STYLE_USAGE(.BOTH.,#282710); +#282710 = SURFACE_SIDE_STYLE('',(#282711)); +#282711 = SURFACE_STYLE_FILL_AREA(#282712); +#282712 = FILL_AREA_STYLE('',(#282713)); +#282713 = FILL_AREA_STYLE_COLOUR('',#270441); +#282714 = OVER_RIDING_STYLED_ITEM('overriding color',(#282715),#65496, + #282670); +#282715 = PRESENTATION_STYLE_ASSIGNMENT((#282716)); +#282716 = SURFACE_STYLE_USAGE(.BOTH.,#282717); +#282717 = SURFACE_SIDE_STYLE('',(#282718)); +#282718 = SURFACE_STYLE_FILL_AREA(#282719); +#282719 = FILL_AREA_STYLE('',(#282720)); +#282720 = FILL_AREA_STYLE_COLOUR('',#270441); +#282721 = OVER_RIDING_STYLED_ITEM('overriding color',(#282722),#65513, + #282670); +#282722 = PRESENTATION_STYLE_ASSIGNMENT((#282723)); +#282723 = SURFACE_STYLE_USAGE(.BOTH.,#282724); +#282724 = SURFACE_SIDE_STYLE('',(#282725)); +#282725 = SURFACE_STYLE_FILL_AREA(#282726); +#282726 = FILL_AREA_STYLE('',(#282727)); +#282727 = FILL_AREA_STYLE_COLOUR('',#270441); +#282728 = OVER_RIDING_STYLED_ITEM('overriding color',(#282729),#65530, + #282670); +#282729 = PRESENTATION_STYLE_ASSIGNMENT((#282730)); +#282730 = SURFACE_STYLE_USAGE(.BOTH.,#282731); +#282731 = SURFACE_SIDE_STYLE('',(#282732)); +#282732 = SURFACE_STYLE_FILL_AREA(#282733); +#282733 = FILL_AREA_STYLE('',(#282734)); +#282734 = FILL_AREA_STYLE_COLOUR('',#270441); +#282735 = OVER_RIDING_STYLED_ITEM('overriding color',(#282736),#65547, + #282670); +#282736 = PRESENTATION_STYLE_ASSIGNMENT((#282737)); +#282737 = SURFACE_STYLE_USAGE(.BOTH.,#282738); +#282738 = SURFACE_SIDE_STYLE('',(#282739)); +#282739 = SURFACE_STYLE_FILL_AREA(#282740); +#282740 = FILL_AREA_STYLE('',(#282741)); +#282741 = FILL_AREA_STYLE_COLOUR('',#270441); +#282742 = OVER_RIDING_STYLED_ITEM('overriding color',(#282743),#65564, + #282670); +#282743 = PRESENTATION_STYLE_ASSIGNMENT((#282744)); +#282744 = SURFACE_STYLE_USAGE(.BOTH.,#282745); +#282745 = SURFACE_SIDE_STYLE('',(#282746)); +#282746 = SURFACE_STYLE_FILL_AREA(#282747); +#282747 = FILL_AREA_STYLE('',(#282748)); +#282748 = FILL_AREA_STYLE_COLOUR('',#270441); +#282749 = OVER_RIDING_STYLED_ITEM('overriding color',(#282750),#65581, + #282670); +#282750 = PRESENTATION_STYLE_ASSIGNMENT((#282751)); +#282751 = SURFACE_STYLE_USAGE(.BOTH.,#282752); +#282752 = SURFACE_SIDE_STYLE('',(#282753)); +#282753 = SURFACE_STYLE_FILL_AREA(#282754); +#282754 = FILL_AREA_STYLE('',(#282755)); +#282755 = FILL_AREA_STYLE_COLOUR('',#270441); +#282756 = OVER_RIDING_STYLED_ITEM('overriding color',(#282757),#65598, + #282670); +#282757 = PRESENTATION_STYLE_ASSIGNMENT((#282758)); +#282758 = SURFACE_STYLE_USAGE(.BOTH.,#282759); +#282759 = SURFACE_SIDE_STYLE('',(#282760)); +#282760 = SURFACE_STYLE_FILL_AREA(#282761); +#282761 = FILL_AREA_STYLE('',(#282762)); +#282762 = FILL_AREA_STYLE_COLOUR('',#270441); +#282763 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #282764,#282771,#282778,#282785,#282792,#282799,#282806,#282813, + #282820,#282827,#282834,#282841,#282848,#282855,#282862,#282869, + #282876,#282883,#282890,#282897,#282904,#282911,#282918,#282925, + #282932,#282939,#282946,#282953,#282960,#282967,#282974,#282981, + #282988,#282995,#283002,#283009,#283016,#283023,#283030,#283037, + #283044,#283051,#283058,#283065,#283072,#283079,#283086,#283093, + #283100,#283107,#283114,#283121,#283128,#283135,#283142,#283149, + #283156,#283163,#283170,#283177,#283184,#283191,#283198,#283205, + #283212,#283219,#283226,#283233,#283240,#283247,#283254,#283261, + #283268,#283275,#283282,#283289,#283296,#283303,#283310,#283317, + #283324,#283331,#283338,#283345,#283352,#283359,#283366,#283373, + #283380,#283387,#283394,#283401,#283408,#283415,#283422,#283429, + #283436,#283443,#283450,#283457,#283464,#283471,#283478,#283485, + #283492,#283499,#283506,#283513,#283520,#283527,#283534,#283541, + #283548,#283555,#283562,#283569,#283576,#283583,#283590,#283597, + #283604,#283611,#283618,#283625,#283632,#283639,#283646,#283653, + #283660,#283667,#283674,#283681,#283688,#283695,#283702,#283709, + #283716,#283723,#283730,#283737,#283744,#283751,#283758,#283765, + #283772,#283779,#283786,#283793,#283800,#283807,#283814,#283821, + #283828,#283835,#283842,#283849,#283856,#283863),#95594); +#282764 = STYLED_ITEM('color',(#282765),#90426); +#282765 = PRESENTATION_STYLE_ASSIGNMENT((#282766)); +#282766 = SURFACE_STYLE_USAGE(.BOTH.,#282767); +#282767 = SURFACE_SIDE_STYLE('',(#282768)); +#282768 = SURFACE_STYLE_FILL_AREA(#282769); +#282769 = FILL_AREA_STYLE('',(#282770)); +#282770 = FILL_AREA_STYLE_COLOUR('',#270441); +#282771 = STYLED_ITEM('color',(#282772),#90467); +#282772 = PRESENTATION_STYLE_ASSIGNMENT((#282773)); +#282773 = SURFACE_STYLE_USAGE(.BOTH.,#282774); +#282774 = SURFACE_SIDE_STYLE('',(#282775)); +#282775 = SURFACE_STYLE_FILL_AREA(#282776); +#282776 = FILL_AREA_STYLE('',(#282777)); +#282777 = FILL_AREA_STYLE_COLOUR('',#270441); +#282778 = STYLED_ITEM('color',(#282779),#90514); +#282779 = PRESENTATION_STYLE_ASSIGNMENT((#282780)); +#282780 = SURFACE_STYLE_USAGE(.BOTH.,#282781); +#282781 = SURFACE_SIDE_STYLE('',(#282782)); +#282782 = SURFACE_STYLE_FILL_AREA(#282783); +#282783 = FILL_AREA_STYLE('',(#282784)); +#282784 = FILL_AREA_STYLE_COLOUR('',#270441); +#282785 = STYLED_ITEM('color',(#282786),#90539); +#282786 = PRESENTATION_STYLE_ASSIGNMENT((#282787)); +#282787 = SURFACE_STYLE_USAGE(.BOTH.,#282788); +#282788 = SURFACE_SIDE_STYLE('',(#282789)); +#282789 = SURFACE_STYLE_FILL_AREA(#282790); +#282790 = FILL_AREA_STYLE('',(#282791)); +#282791 = FILL_AREA_STYLE_COLOUR('',#270441); +#282792 = STYLED_ITEM('color',(#282793),#90579); +#282793 = PRESENTATION_STYLE_ASSIGNMENT((#282794)); +#282794 = SURFACE_STYLE_USAGE(.BOTH.,#282795); +#282795 = SURFACE_SIDE_STYLE('',(#282796)); +#282796 = SURFACE_STYLE_FILL_AREA(#282797); +#282797 = FILL_AREA_STYLE('',(#282798)); +#282798 = FILL_AREA_STYLE_COLOUR('',#270441); +#282799 = STYLED_ITEM('color',(#282800),#90596); +#282800 = PRESENTATION_STYLE_ASSIGNMENT((#282801)); +#282801 = SURFACE_STYLE_USAGE(.BOTH.,#282802); +#282802 = SURFACE_SIDE_STYLE('',(#282803)); +#282803 = SURFACE_STYLE_FILL_AREA(#282804); +#282804 = FILL_AREA_STYLE('',(#282805)); +#282805 = FILL_AREA_STYLE_COLOUR('',#270350); +#282806 = STYLED_ITEM('color',(#282807),#91446); +#282807 = PRESENTATION_STYLE_ASSIGNMENT((#282808)); +#282808 = SURFACE_STYLE_USAGE(.BOTH.,#282809); +#282809 = SURFACE_SIDE_STYLE('',(#282810)); +#282810 = SURFACE_STYLE_FILL_AREA(#282811); +#282811 = FILL_AREA_STYLE('',(#282812)); +#282812 = FILL_AREA_STYLE_COLOUR('',#270350); +#282813 = STYLED_ITEM('color',(#282814),#91578); +#282814 = PRESENTATION_STYLE_ASSIGNMENT((#282815)); +#282815 = SURFACE_STYLE_USAGE(.BOTH.,#282816); +#282816 = SURFACE_SIDE_STYLE('',(#282817)); +#282817 = SURFACE_STYLE_FILL_AREA(#282818); +#282818 = FILL_AREA_STYLE('',(#282819)); +#282819 = FILL_AREA_STYLE_COLOUR('',#270441); +#282820 = STYLED_ITEM('color',(#282821),#91590); +#282821 = PRESENTATION_STYLE_ASSIGNMENT((#282822)); +#282822 = SURFACE_STYLE_USAGE(.BOTH.,#282823); +#282823 = SURFACE_SIDE_STYLE('',(#282824)); +#282824 = SURFACE_STYLE_FILL_AREA(#282825); +#282825 = FILL_AREA_STYLE('',(#282826)); +#282826 = FILL_AREA_STYLE_COLOUR('',#270350); +#282827 = STYLED_ITEM('color',(#282828),#91775); +#282828 = PRESENTATION_STYLE_ASSIGNMENT((#282829)); +#282829 = SURFACE_STYLE_USAGE(.BOTH.,#282830); +#282830 = SURFACE_SIDE_STYLE('',(#282831)); +#282831 = SURFACE_STYLE_FILL_AREA(#282832); +#282832 = FILL_AREA_STYLE('',(#282833)); +#282833 = FILL_AREA_STYLE_COLOUR('',#270441); +#282834 = STYLED_ITEM('color',(#282835),#91815); +#282835 = PRESENTATION_STYLE_ASSIGNMENT((#282836)); +#282836 = SURFACE_STYLE_USAGE(.BOTH.,#282837); +#282837 = SURFACE_SIDE_STYLE('',(#282838)); +#282838 = SURFACE_STYLE_FILL_AREA(#282839); +#282839 = FILL_AREA_STYLE('',(#282840)); +#282840 = FILL_AREA_STYLE_COLOUR('',#270441); +#282841 = STYLED_ITEM('color',(#282842),#91840); +#282842 = PRESENTATION_STYLE_ASSIGNMENT((#282843)); +#282843 = SURFACE_STYLE_USAGE(.BOTH.,#282844); +#282844 = SURFACE_SIDE_STYLE('',(#282845)); +#282845 = SURFACE_STYLE_FILL_AREA(#282846); +#282846 = FILL_AREA_STYLE('',(#282847)); +#282847 = FILL_AREA_STYLE_COLOUR('',#270441); +#282848 = STYLED_ITEM('color',(#282849),#91873); +#282849 = PRESENTATION_STYLE_ASSIGNMENT((#282850)); +#282850 = SURFACE_STYLE_USAGE(.BOTH.,#282851); +#282851 = SURFACE_SIDE_STYLE('',(#282852)); +#282852 = SURFACE_STYLE_FILL_AREA(#282853); +#282853 = FILL_AREA_STYLE('',(#282854)); +#282854 = FILL_AREA_STYLE_COLOUR('',#270441); +#282855 = STYLED_ITEM('color',(#282856),#91913); +#282856 = PRESENTATION_STYLE_ASSIGNMENT((#282857)); +#282857 = SURFACE_STYLE_USAGE(.BOTH.,#282858); +#282858 = SURFACE_SIDE_STYLE('',(#282859)); +#282859 = SURFACE_STYLE_FILL_AREA(#282860); +#282860 = FILL_AREA_STYLE('',(#282861)); +#282861 = FILL_AREA_STYLE_COLOUR('',#270441); +#282862 = STYLED_ITEM('color',(#282863),#91953); +#282863 = PRESENTATION_STYLE_ASSIGNMENT((#282864)); +#282864 = SURFACE_STYLE_USAGE(.BOTH.,#282865); +#282865 = SURFACE_SIDE_STYLE('',(#282866)); +#282866 = SURFACE_STYLE_FILL_AREA(#282867); +#282867 = FILL_AREA_STYLE('',(#282868)); +#282868 = FILL_AREA_STYLE_COLOUR('',#270441); +#282869 = STYLED_ITEM('color',(#282870),#91978); +#282870 = PRESENTATION_STYLE_ASSIGNMENT((#282871)); +#282871 = SURFACE_STYLE_USAGE(.BOTH.,#282872); +#282872 = SURFACE_SIDE_STYLE('',(#282873)); +#282873 = SURFACE_STYLE_FILL_AREA(#282874); +#282874 = FILL_AREA_STYLE('',(#282875)); +#282875 = FILL_AREA_STYLE_COLOUR('',#270441); +#282876 = STYLED_ITEM('color',(#282877),#92003); +#282877 = PRESENTATION_STYLE_ASSIGNMENT((#282878)); +#282878 = SURFACE_STYLE_USAGE(.BOTH.,#282879); +#282879 = SURFACE_SIDE_STYLE('',(#282880)); +#282880 = SURFACE_STYLE_FILL_AREA(#282881); +#282881 = FILL_AREA_STYLE('',(#282882)); +#282882 = FILL_AREA_STYLE_COLOUR('',#270441); +#282883 = STYLED_ITEM('color',(#282884),#92036); +#282884 = PRESENTATION_STYLE_ASSIGNMENT((#282885)); +#282885 = SURFACE_STYLE_USAGE(.BOTH.,#282886); +#282886 = SURFACE_SIDE_STYLE('',(#282887)); +#282887 = SURFACE_STYLE_FILL_AREA(#282888); +#282888 = FILL_AREA_STYLE('',(#282889)); +#282889 = FILL_AREA_STYLE_COLOUR('',#270441); +#282890 = STYLED_ITEM('color',(#282891),#92069); +#282891 = PRESENTATION_STYLE_ASSIGNMENT((#282892)); +#282892 = SURFACE_STYLE_USAGE(.BOTH.,#282893); +#282893 = SURFACE_SIDE_STYLE('',(#282894)); +#282894 = SURFACE_STYLE_FILL_AREA(#282895); +#282895 = FILL_AREA_STYLE('',(#282896)); +#282896 = FILL_AREA_STYLE_COLOUR('',#270441); +#282897 = STYLED_ITEM('color',(#282898),#92109); +#282898 = PRESENTATION_STYLE_ASSIGNMENT((#282899)); +#282899 = SURFACE_STYLE_USAGE(.BOTH.,#282900); +#282900 = SURFACE_SIDE_STYLE('',(#282901)); +#282901 = SURFACE_STYLE_FILL_AREA(#282902); +#282902 = FILL_AREA_STYLE('',(#282903)); +#282903 = FILL_AREA_STYLE_COLOUR('',#270441); +#282904 = STYLED_ITEM('color',(#282905),#92149); +#282905 = PRESENTATION_STYLE_ASSIGNMENT((#282906)); +#282906 = SURFACE_STYLE_USAGE(.BOTH.,#282907); +#282907 = SURFACE_SIDE_STYLE('',(#282908)); +#282908 = SURFACE_STYLE_FILL_AREA(#282909); +#282909 = FILL_AREA_STYLE('',(#282910)); +#282910 = FILL_AREA_STYLE_COLOUR('',#270441); +#282911 = STYLED_ITEM('color',(#282912),#92174); +#282912 = PRESENTATION_STYLE_ASSIGNMENT((#282913)); +#282913 = SURFACE_STYLE_USAGE(.BOTH.,#282914); +#282914 = SURFACE_SIDE_STYLE('',(#282915)); +#282915 = SURFACE_STYLE_FILL_AREA(#282916); +#282916 = FILL_AREA_STYLE('',(#282917)); +#282917 = FILL_AREA_STYLE_COLOUR('',#270441); +#282918 = STYLED_ITEM('color',(#282919),#92199); +#282919 = PRESENTATION_STYLE_ASSIGNMENT((#282920)); +#282920 = SURFACE_STYLE_USAGE(.BOTH.,#282921); +#282921 = SURFACE_SIDE_STYLE('',(#282922)); +#282922 = SURFACE_STYLE_FILL_AREA(#282923); +#282923 = FILL_AREA_STYLE('',(#282924)); +#282924 = FILL_AREA_STYLE_COLOUR('',#270441); +#282925 = STYLED_ITEM('color',(#282926),#92232); +#282926 = PRESENTATION_STYLE_ASSIGNMENT((#282927)); +#282927 = SURFACE_STYLE_USAGE(.BOTH.,#282928); +#282928 = SURFACE_SIDE_STYLE('',(#282929)); +#282929 = SURFACE_STYLE_FILL_AREA(#282930); +#282930 = FILL_AREA_STYLE('',(#282931)); +#282931 = FILL_AREA_STYLE_COLOUR('',#270441); +#282932 = STYLED_ITEM('color',(#282933),#92265); +#282933 = PRESENTATION_STYLE_ASSIGNMENT((#282934)); +#282934 = SURFACE_STYLE_USAGE(.BOTH.,#282935); +#282935 = SURFACE_SIDE_STYLE('',(#282936)); +#282936 = SURFACE_STYLE_FILL_AREA(#282937); +#282937 = FILL_AREA_STYLE('',(#282938)); +#282938 = FILL_AREA_STYLE_COLOUR('',#270441); +#282939 = STYLED_ITEM('color',(#282940),#92305); +#282940 = PRESENTATION_STYLE_ASSIGNMENT((#282941)); +#282941 = SURFACE_STYLE_USAGE(.BOTH.,#282942); +#282942 = SURFACE_SIDE_STYLE('',(#282943)); +#282943 = SURFACE_STYLE_FILL_AREA(#282944); +#282944 = FILL_AREA_STYLE('',(#282945)); +#282945 = FILL_AREA_STYLE_COLOUR('',#270441); +#282946 = STYLED_ITEM('color',(#282947),#92345); +#282947 = PRESENTATION_STYLE_ASSIGNMENT((#282948)); +#282948 = SURFACE_STYLE_USAGE(.BOTH.,#282949); +#282949 = SURFACE_SIDE_STYLE('',(#282950)); +#282950 = SURFACE_STYLE_FILL_AREA(#282951); +#282951 = FILL_AREA_STYLE('',(#282952)); +#282952 = FILL_AREA_STYLE_COLOUR('',#270441); +#282953 = STYLED_ITEM('color',(#282954),#92370); +#282954 = PRESENTATION_STYLE_ASSIGNMENT((#282955)); +#282955 = SURFACE_STYLE_USAGE(.BOTH.,#282956); +#282956 = SURFACE_SIDE_STYLE('',(#282957)); +#282957 = SURFACE_STYLE_FILL_AREA(#282958); +#282958 = FILL_AREA_STYLE('',(#282959)); +#282959 = FILL_AREA_STYLE_COLOUR('',#270441); +#282960 = STYLED_ITEM('color',(#282961),#92395); +#282961 = PRESENTATION_STYLE_ASSIGNMENT((#282962)); +#282962 = SURFACE_STYLE_USAGE(.BOTH.,#282963); +#282963 = SURFACE_SIDE_STYLE('',(#282964)); +#282964 = SURFACE_STYLE_FILL_AREA(#282965); +#282965 = FILL_AREA_STYLE('',(#282966)); +#282966 = FILL_AREA_STYLE_COLOUR('',#270441); +#282967 = STYLED_ITEM('color',(#282968),#92428); +#282968 = PRESENTATION_STYLE_ASSIGNMENT((#282969)); +#282969 = SURFACE_STYLE_USAGE(.BOTH.,#282970); +#282970 = SURFACE_SIDE_STYLE('',(#282971)); +#282971 = SURFACE_STYLE_FILL_AREA(#282972); +#282972 = FILL_AREA_STYLE('',(#282973)); +#282973 = FILL_AREA_STYLE_COLOUR('',#270441); +#282974 = STYLED_ITEM('color',(#282975),#92461); +#282975 = PRESENTATION_STYLE_ASSIGNMENT((#282976)); +#282976 = SURFACE_STYLE_USAGE(.BOTH.,#282977); +#282977 = SURFACE_SIDE_STYLE('',(#282978)); +#282978 = SURFACE_STYLE_FILL_AREA(#282979); +#282979 = FILL_AREA_STYLE('',(#282980)); +#282980 = FILL_AREA_STYLE_COLOUR('',#270441); +#282981 = STYLED_ITEM('color',(#282982),#92501); +#282982 = PRESENTATION_STYLE_ASSIGNMENT((#282983)); +#282983 = SURFACE_STYLE_USAGE(.BOTH.,#282984); +#282984 = SURFACE_SIDE_STYLE('',(#282985)); +#282985 = SURFACE_STYLE_FILL_AREA(#282986); +#282986 = FILL_AREA_STYLE('',(#282987)); +#282987 = FILL_AREA_STYLE_COLOUR('',#270441); +#282988 = STYLED_ITEM('color',(#282989),#92541); +#282989 = PRESENTATION_STYLE_ASSIGNMENT((#282990)); +#282990 = SURFACE_STYLE_USAGE(.BOTH.,#282991); +#282991 = SURFACE_SIDE_STYLE('',(#282992)); +#282992 = SURFACE_STYLE_FILL_AREA(#282993); +#282993 = FILL_AREA_STYLE('',(#282994)); +#282994 = FILL_AREA_STYLE_COLOUR('',#270441); +#282995 = STYLED_ITEM('color',(#282996),#92566); +#282996 = PRESENTATION_STYLE_ASSIGNMENT((#282997)); +#282997 = SURFACE_STYLE_USAGE(.BOTH.,#282998); +#282998 = SURFACE_SIDE_STYLE('',(#282999)); +#282999 = SURFACE_STYLE_FILL_AREA(#283000); +#283000 = FILL_AREA_STYLE('',(#283001)); +#283001 = FILL_AREA_STYLE_COLOUR('',#270441); +#283002 = STYLED_ITEM('color',(#283003),#92591); +#283003 = PRESENTATION_STYLE_ASSIGNMENT((#283004)); +#283004 = SURFACE_STYLE_USAGE(.BOTH.,#283005); +#283005 = SURFACE_SIDE_STYLE('',(#283006)); +#283006 = SURFACE_STYLE_FILL_AREA(#283007); +#283007 = FILL_AREA_STYLE('',(#283008)); +#283008 = FILL_AREA_STYLE_COLOUR('',#270441); +#283009 = STYLED_ITEM('color',(#283010),#92624); +#283010 = PRESENTATION_STYLE_ASSIGNMENT((#283011)); +#283011 = SURFACE_STYLE_USAGE(.BOTH.,#283012); +#283012 = SURFACE_SIDE_STYLE('',(#283013)); +#283013 = SURFACE_STYLE_FILL_AREA(#283014); +#283014 = FILL_AREA_STYLE('',(#283015)); +#283015 = FILL_AREA_STYLE_COLOUR('',#270441); +#283016 = STYLED_ITEM('color',(#283017),#92657); +#283017 = PRESENTATION_STYLE_ASSIGNMENT((#283018)); +#283018 = SURFACE_STYLE_USAGE(.BOTH.,#283019); +#283019 = SURFACE_SIDE_STYLE('',(#283020)); +#283020 = SURFACE_STYLE_FILL_AREA(#283021); +#283021 = FILL_AREA_STYLE('',(#283022)); +#283022 = FILL_AREA_STYLE_COLOUR('',#270350); +#283023 = STYLED_ITEM('color',(#283024),#92842); +#283024 = PRESENTATION_STYLE_ASSIGNMENT((#283025)); +#283025 = SURFACE_STYLE_USAGE(.BOTH.,#283026); +#283026 = SURFACE_SIDE_STYLE('',(#283027)); +#283027 = SURFACE_STYLE_FILL_AREA(#283028); +#283028 = FILL_AREA_STYLE('',(#283029)); +#283029 = FILL_AREA_STYLE_COLOUR('',#270441); +#283030 = STYLED_ITEM('color',(#283031),#92882); +#283031 = PRESENTATION_STYLE_ASSIGNMENT((#283032)); +#283032 = SURFACE_STYLE_USAGE(.BOTH.,#283033); +#283033 = SURFACE_SIDE_STYLE('',(#283034)); +#283034 = SURFACE_STYLE_FILL_AREA(#283035); +#283035 = FILL_AREA_STYLE('',(#283036)); +#283036 = FILL_AREA_STYLE_COLOUR('',#270441); +#283037 = STYLED_ITEM('color',(#283038),#92922); +#283038 = PRESENTATION_STYLE_ASSIGNMENT((#283039)); +#283039 = SURFACE_STYLE_USAGE(.BOTH.,#283040); +#283040 = SURFACE_SIDE_STYLE('',(#283041)); +#283041 = SURFACE_STYLE_FILL_AREA(#283042); +#283042 = FILL_AREA_STYLE('',(#283043)); +#283043 = FILL_AREA_STYLE_COLOUR('',#270441); +#283044 = STYLED_ITEM('color',(#283045),#92947); +#283045 = PRESENTATION_STYLE_ASSIGNMENT((#283046)); +#283046 = SURFACE_STYLE_USAGE(.BOTH.,#283047); +#283047 = SURFACE_SIDE_STYLE('',(#283048)); +#283048 = SURFACE_STYLE_FILL_AREA(#283049); +#283049 = FILL_AREA_STYLE('',(#283050)); +#283050 = FILL_AREA_STYLE_COLOUR('',#270441); +#283051 = STYLED_ITEM('color',(#283052),#92972); +#283052 = PRESENTATION_STYLE_ASSIGNMENT((#283053)); +#283053 = SURFACE_STYLE_USAGE(.BOTH.,#283054); +#283054 = SURFACE_SIDE_STYLE('',(#283055)); +#283055 = SURFACE_STYLE_FILL_AREA(#283056); +#283056 = FILL_AREA_STYLE('',(#283057)); +#283057 = FILL_AREA_STYLE_COLOUR('',#270441); +#283058 = STYLED_ITEM('color',(#283059),#93005); +#283059 = PRESENTATION_STYLE_ASSIGNMENT((#283060)); +#283060 = SURFACE_STYLE_USAGE(.BOTH.,#283061); +#283061 = SURFACE_SIDE_STYLE('',(#283062)); +#283062 = SURFACE_STYLE_FILL_AREA(#283063); +#283063 = FILL_AREA_STYLE('',(#283064)); +#283064 = FILL_AREA_STYLE_COLOUR('',#270441); +#283065 = STYLED_ITEM('color',(#283066),#93038); +#283066 = PRESENTATION_STYLE_ASSIGNMENT((#283067)); +#283067 = SURFACE_STYLE_USAGE(.BOTH.,#283068); +#283068 = SURFACE_SIDE_STYLE('',(#283069)); +#283069 = SURFACE_STYLE_FILL_AREA(#283070); +#283070 = FILL_AREA_STYLE('',(#283071)); +#283071 = FILL_AREA_STYLE_COLOUR('',#270441); +#283072 = STYLED_ITEM('color',(#283073),#93078); +#283073 = PRESENTATION_STYLE_ASSIGNMENT((#283074)); +#283074 = SURFACE_STYLE_USAGE(.BOTH.,#283075); +#283075 = SURFACE_SIDE_STYLE('',(#283076)); +#283076 = SURFACE_STYLE_FILL_AREA(#283077); +#283077 = FILL_AREA_STYLE('',(#283078)); +#283078 = FILL_AREA_STYLE_COLOUR('',#270441); +#283079 = STYLED_ITEM('color',(#283080),#93118); +#283080 = PRESENTATION_STYLE_ASSIGNMENT((#283081)); +#283081 = SURFACE_STYLE_USAGE(.BOTH.,#283082); +#283082 = SURFACE_SIDE_STYLE('',(#283083)); +#283083 = SURFACE_STYLE_FILL_AREA(#283084); +#283084 = FILL_AREA_STYLE('',(#283085)); +#283085 = FILL_AREA_STYLE_COLOUR('',#270441); +#283086 = STYLED_ITEM('color',(#283087),#93143); +#283087 = PRESENTATION_STYLE_ASSIGNMENT((#283088)); +#283088 = SURFACE_STYLE_USAGE(.BOTH.,#283089); +#283089 = SURFACE_SIDE_STYLE('',(#283090)); +#283090 = SURFACE_STYLE_FILL_AREA(#283091); +#283091 = FILL_AREA_STYLE('',(#283092)); +#283092 = FILL_AREA_STYLE_COLOUR('',#270441); +#283093 = STYLED_ITEM('color',(#283094),#93168); +#283094 = PRESENTATION_STYLE_ASSIGNMENT((#283095)); +#283095 = SURFACE_STYLE_USAGE(.BOTH.,#283096); +#283096 = SURFACE_SIDE_STYLE('',(#283097)); +#283097 = SURFACE_STYLE_FILL_AREA(#283098); +#283098 = FILL_AREA_STYLE('',(#283099)); +#283099 = FILL_AREA_STYLE_COLOUR('',#270441); +#283100 = STYLED_ITEM('color',(#283101),#93201); +#283101 = PRESENTATION_STYLE_ASSIGNMENT((#283102)); +#283102 = SURFACE_STYLE_USAGE(.BOTH.,#283103); +#283103 = SURFACE_SIDE_STYLE('',(#283104)); +#283104 = SURFACE_STYLE_FILL_AREA(#283105); +#283105 = FILL_AREA_STYLE('',(#283106)); +#283106 = FILL_AREA_STYLE_COLOUR('',#270441); +#283107 = STYLED_ITEM('color',(#283108),#93234); +#283108 = PRESENTATION_STYLE_ASSIGNMENT((#283109)); +#283109 = SURFACE_STYLE_USAGE(.BOTH.,#283110); +#283110 = SURFACE_SIDE_STYLE('',(#283111)); +#283111 = SURFACE_STYLE_FILL_AREA(#283112); +#283112 = FILL_AREA_STYLE('',(#283113)); +#283113 = FILL_AREA_STYLE_COLOUR('',#270350); +#283114 = STYLED_ITEM('color',(#283115),#93366); +#283115 = PRESENTATION_STYLE_ASSIGNMENT((#283116)); +#283116 = SURFACE_STYLE_USAGE(.BOTH.,#283117); +#283117 = SURFACE_SIDE_STYLE('',(#283118)); +#283118 = SURFACE_STYLE_FILL_AREA(#283119); +#283119 = FILL_AREA_STYLE('',(#283120)); +#283120 = FILL_AREA_STYLE_COLOUR('',#270441); +#283121 = STYLED_ITEM('color',(#283122),#93406); +#283122 = PRESENTATION_STYLE_ASSIGNMENT((#283123)); +#283123 = SURFACE_STYLE_USAGE(.BOTH.,#283124); +#283124 = SURFACE_SIDE_STYLE('',(#283125)); +#283125 = SURFACE_STYLE_FILL_AREA(#283126); +#283126 = FILL_AREA_STYLE('',(#283127)); +#283127 = FILL_AREA_STYLE_COLOUR('',#270441); +#283128 = STYLED_ITEM('color',(#283129),#93446); +#283129 = PRESENTATION_STYLE_ASSIGNMENT((#283130)); +#283130 = SURFACE_STYLE_USAGE(.BOTH.,#283131); +#283131 = SURFACE_SIDE_STYLE('',(#283132)); +#283132 = SURFACE_STYLE_FILL_AREA(#283133); +#283133 = FILL_AREA_STYLE('',(#283134)); +#283134 = FILL_AREA_STYLE_COLOUR('',#270441); +#283135 = STYLED_ITEM('color',(#283136),#93471); +#283136 = PRESENTATION_STYLE_ASSIGNMENT((#283137)); +#283137 = SURFACE_STYLE_USAGE(.BOTH.,#283138); +#283138 = SURFACE_SIDE_STYLE('',(#283139)); +#283139 = SURFACE_STYLE_FILL_AREA(#283140); +#283140 = FILL_AREA_STYLE('',(#283141)); +#283141 = FILL_AREA_STYLE_COLOUR('',#270441); +#283142 = STYLED_ITEM('color',(#283143),#93496); +#283143 = PRESENTATION_STYLE_ASSIGNMENT((#283144)); +#283144 = SURFACE_STYLE_USAGE(.BOTH.,#283145); +#283145 = SURFACE_SIDE_STYLE('',(#283146)); +#283146 = SURFACE_STYLE_FILL_AREA(#283147); +#283147 = FILL_AREA_STYLE('',(#283148)); +#283148 = FILL_AREA_STYLE_COLOUR('',#270441); +#283149 = STYLED_ITEM('color',(#283150),#93529); +#283150 = PRESENTATION_STYLE_ASSIGNMENT((#283151)); +#283151 = SURFACE_STYLE_USAGE(.BOTH.,#283152); +#283152 = SURFACE_SIDE_STYLE('',(#283153)); +#283153 = SURFACE_STYLE_FILL_AREA(#283154); +#283154 = FILL_AREA_STYLE('',(#283155)); +#283155 = FILL_AREA_STYLE_COLOUR('',#270441); +#283156 = STYLED_ITEM('color',(#283157),#93562); +#283157 = PRESENTATION_STYLE_ASSIGNMENT((#283158)); +#283158 = SURFACE_STYLE_USAGE(.BOTH.,#283159); +#283159 = SURFACE_SIDE_STYLE('',(#283160)); +#283160 = SURFACE_STYLE_FILL_AREA(#283161); +#283161 = FILL_AREA_STYLE('',(#283162)); +#283162 = FILL_AREA_STYLE_COLOUR('',#270441); +#283163 = STYLED_ITEM('color',(#283164),#93602); +#283164 = PRESENTATION_STYLE_ASSIGNMENT((#283165)); +#283165 = SURFACE_STYLE_USAGE(.BOTH.,#283166); +#283166 = SURFACE_SIDE_STYLE('',(#283167)); +#283167 = SURFACE_STYLE_FILL_AREA(#283168); +#283168 = FILL_AREA_STYLE('',(#283169)); +#283169 = FILL_AREA_STYLE_COLOUR('',#270441); +#283170 = STYLED_ITEM('color',(#283171),#93642); +#283171 = PRESENTATION_STYLE_ASSIGNMENT((#283172)); +#283172 = SURFACE_STYLE_USAGE(.BOTH.,#283173); +#283173 = SURFACE_SIDE_STYLE('',(#283174)); +#283174 = SURFACE_STYLE_FILL_AREA(#283175); +#283175 = FILL_AREA_STYLE('',(#283176)); +#283176 = FILL_AREA_STYLE_COLOUR('',#270441); +#283177 = STYLED_ITEM('color',(#283178),#93667); +#283178 = PRESENTATION_STYLE_ASSIGNMENT((#283179)); +#283179 = SURFACE_STYLE_USAGE(.BOTH.,#283180); +#283180 = SURFACE_SIDE_STYLE('',(#283181)); +#283181 = SURFACE_STYLE_FILL_AREA(#283182); +#283182 = FILL_AREA_STYLE('',(#283183)); +#283183 = FILL_AREA_STYLE_COLOUR('',#270441); +#283184 = STYLED_ITEM('color',(#283185),#93692); +#283185 = PRESENTATION_STYLE_ASSIGNMENT((#283186)); +#283186 = SURFACE_STYLE_USAGE(.BOTH.,#283187); +#283187 = SURFACE_SIDE_STYLE('',(#283188)); +#283188 = SURFACE_STYLE_FILL_AREA(#283189); +#283189 = FILL_AREA_STYLE('',(#283190)); +#283190 = FILL_AREA_STYLE_COLOUR('',#270441); +#283191 = STYLED_ITEM('color',(#283192),#93725); +#283192 = PRESENTATION_STYLE_ASSIGNMENT((#283193)); +#283193 = SURFACE_STYLE_USAGE(.BOTH.,#283194); +#283194 = SURFACE_SIDE_STYLE('',(#283195)); +#283195 = SURFACE_STYLE_FILL_AREA(#283196); +#283196 = FILL_AREA_STYLE('',(#283197)); +#283197 = FILL_AREA_STYLE_COLOUR('',#270441); +#283198 = STYLED_ITEM('color',(#283199),#93758); +#283199 = PRESENTATION_STYLE_ASSIGNMENT((#283200)); +#283200 = SURFACE_STYLE_USAGE(.BOTH.,#283201); +#283201 = SURFACE_SIDE_STYLE('',(#283202)); +#283202 = SURFACE_STYLE_FILL_AREA(#283203); +#283203 = FILL_AREA_STYLE('',(#283204)); +#283204 = FILL_AREA_STYLE_COLOUR('',#270441); +#283205 = STYLED_ITEM('color',(#283206),#93798); +#283206 = PRESENTATION_STYLE_ASSIGNMENT((#283207)); +#283207 = SURFACE_STYLE_USAGE(.BOTH.,#283208); +#283208 = SURFACE_SIDE_STYLE('',(#283209)); +#283209 = SURFACE_STYLE_FILL_AREA(#283210); +#283210 = FILL_AREA_STYLE('',(#283211)); +#283211 = FILL_AREA_STYLE_COLOUR('',#270441); +#283212 = STYLED_ITEM('color',(#283213),#93838); +#283213 = PRESENTATION_STYLE_ASSIGNMENT((#283214)); +#283214 = SURFACE_STYLE_USAGE(.BOTH.,#283215); +#283215 = SURFACE_SIDE_STYLE('',(#283216)); +#283216 = SURFACE_STYLE_FILL_AREA(#283217); +#283217 = FILL_AREA_STYLE('',(#283218)); +#283218 = FILL_AREA_STYLE_COLOUR('',#270441); +#283219 = STYLED_ITEM('color',(#283220),#93863); +#283220 = PRESENTATION_STYLE_ASSIGNMENT((#283221)); +#283221 = SURFACE_STYLE_USAGE(.BOTH.,#283222); +#283222 = SURFACE_SIDE_STYLE('',(#283223)); +#283223 = SURFACE_STYLE_FILL_AREA(#283224); +#283224 = FILL_AREA_STYLE('',(#283225)); +#283225 = FILL_AREA_STYLE_COLOUR('',#270441); +#283226 = STYLED_ITEM('color',(#283227),#93888); +#283227 = PRESENTATION_STYLE_ASSIGNMENT((#283228)); +#283228 = SURFACE_STYLE_USAGE(.BOTH.,#283229); +#283229 = SURFACE_SIDE_STYLE('',(#283230)); +#283230 = SURFACE_STYLE_FILL_AREA(#283231); +#283231 = FILL_AREA_STYLE('',(#283232)); +#283232 = FILL_AREA_STYLE_COLOUR('',#270441); +#283233 = STYLED_ITEM('color',(#283234),#93921); +#283234 = PRESENTATION_STYLE_ASSIGNMENT((#283235)); +#283235 = SURFACE_STYLE_USAGE(.BOTH.,#283236); +#283236 = SURFACE_SIDE_STYLE('',(#283237)); +#283237 = SURFACE_STYLE_FILL_AREA(#283238); +#283238 = FILL_AREA_STYLE('',(#283239)); +#283239 = FILL_AREA_STYLE_COLOUR('',#270441); +#283240 = STYLED_ITEM('color',(#283241),#93954); +#283241 = PRESENTATION_STYLE_ASSIGNMENT((#283242)); +#283242 = SURFACE_STYLE_USAGE(.BOTH.,#283243); +#283243 = SURFACE_SIDE_STYLE('',(#283244)); +#283244 = SURFACE_STYLE_FILL_AREA(#283245); +#283245 = FILL_AREA_STYLE('',(#283246)); +#283246 = FILL_AREA_STYLE_COLOUR('',#270441); +#283247 = STYLED_ITEM('color',(#283248),#93994); +#283248 = PRESENTATION_STYLE_ASSIGNMENT((#283249)); +#283249 = SURFACE_STYLE_USAGE(.BOTH.,#283250); +#283250 = SURFACE_SIDE_STYLE('',(#283251)); +#283251 = SURFACE_STYLE_FILL_AREA(#283252); +#283252 = FILL_AREA_STYLE('',(#283253)); +#283253 = FILL_AREA_STYLE_COLOUR('',#270441); +#283254 = STYLED_ITEM('color',(#283255),#94034); +#283255 = PRESENTATION_STYLE_ASSIGNMENT((#283256)); +#283256 = SURFACE_STYLE_USAGE(.BOTH.,#283257); +#283257 = SURFACE_SIDE_STYLE('',(#283258)); +#283258 = SURFACE_STYLE_FILL_AREA(#283259); +#283259 = FILL_AREA_STYLE('',(#283260)); +#283260 = FILL_AREA_STYLE_COLOUR('',#270441); +#283261 = STYLED_ITEM('color',(#283262),#94059); +#283262 = PRESENTATION_STYLE_ASSIGNMENT((#283263)); +#283263 = SURFACE_STYLE_USAGE(.BOTH.,#283264); +#283264 = SURFACE_SIDE_STYLE('',(#283265)); +#283265 = SURFACE_STYLE_FILL_AREA(#283266); +#283266 = FILL_AREA_STYLE('',(#283267)); +#283267 = FILL_AREA_STYLE_COLOUR('',#270441); +#283268 = STYLED_ITEM('color',(#283269),#94084); +#283269 = PRESENTATION_STYLE_ASSIGNMENT((#283270)); +#283270 = SURFACE_STYLE_USAGE(.BOTH.,#283271); +#283271 = SURFACE_SIDE_STYLE('',(#283272)); +#283272 = SURFACE_STYLE_FILL_AREA(#283273); +#283273 = FILL_AREA_STYLE('',(#283274)); +#283274 = FILL_AREA_STYLE_COLOUR('',#270441); +#283275 = STYLED_ITEM('color',(#283276),#94117); +#283276 = PRESENTATION_STYLE_ASSIGNMENT((#283277)); +#283277 = SURFACE_STYLE_USAGE(.BOTH.,#283278); +#283278 = SURFACE_SIDE_STYLE('',(#283279)); +#283279 = SURFACE_STYLE_FILL_AREA(#283280); +#283280 = FILL_AREA_STYLE('',(#283281)); +#283281 = FILL_AREA_STYLE_COLOUR('',#270441); +#283282 = STYLED_ITEM('color',(#283283),#94150); +#283283 = PRESENTATION_STYLE_ASSIGNMENT((#283284)); +#283284 = SURFACE_STYLE_USAGE(.BOTH.,#283285); +#283285 = SURFACE_SIDE_STYLE('',(#283286)); +#283286 = SURFACE_STYLE_FILL_AREA(#283287); +#283287 = FILL_AREA_STYLE('',(#283288)); +#283288 = FILL_AREA_STYLE_COLOUR('',#270441); +#283289 = STYLED_ITEM('color',(#283290),#94190); +#283290 = PRESENTATION_STYLE_ASSIGNMENT((#283291)); +#283291 = SURFACE_STYLE_USAGE(.BOTH.,#283292); +#283292 = SURFACE_SIDE_STYLE('',(#283293)); +#283293 = SURFACE_STYLE_FILL_AREA(#283294); +#283294 = FILL_AREA_STYLE('',(#283295)); +#283295 = FILL_AREA_STYLE_COLOUR('',#270441); +#283296 = STYLED_ITEM('color',(#283297),#94230); +#283297 = PRESENTATION_STYLE_ASSIGNMENT((#283298)); +#283298 = SURFACE_STYLE_USAGE(.BOTH.,#283299); +#283299 = SURFACE_SIDE_STYLE('',(#283300)); +#283300 = SURFACE_STYLE_FILL_AREA(#283301); +#283301 = FILL_AREA_STYLE('',(#283302)); +#283302 = FILL_AREA_STYLE_COLOUR('',#270441); +#283303 = STYLED_ITEM('color',(#283304),#94255); +#283304 = PRESENTATION_STYLE_ASSIGNMENT((#283305)); +#283305 = SURFACE_STYLE_USAGE(.BOTH.,#283306); +#283306 = SURFACE_SIDE_STYLE('',(#283307)); +#283307 = SURFACE_STYLE_FILL_AREA(#283308); +#283308 = FILL_AREA_STYLE('',(#283309)); +#283309 = FILL_AREA_STYLE_COLOUR('',#270441); +#283310 = STYLED_ITEM('color',(#283311),#94280); +#283311 = PRESENTATION_STYLE_ASSIGNMENT((#283312)); +#283312 = SURFACE_STYLE_USAGE(.BOTH.,#283313); +#283313 = SURFACE_SIDE_STYLE('',(#283314)); +#283314 = SURFACE_STYLE_FILL_AREA(#283315); +#283315 = FILL_AREA_STYLE('',(#283316)); +#283316 = FILL_AREA_STYLE_COLOUR('',#270441); +#283317 = STYLED_ITEM('color',(#283318),#94313); +#283318 = PRESENTATION_STYLE_ASSIGNMENT((#283319)); +#283319 = SURFACE_STYLE_USAGE(.BOTH.,#283320); +#283320 = SURFACE_SIDE_STYLE('',(#283321)); +#283321 = SURFACE_STYLE_FILL_AREA(#283322); +#283322 = FILL_AREA_STYLE('',(#283323)); +#283323 = FILL_AREA_STYLE_COLOUR('',#270441); +#283324 = STYLED_ITEM('color',(#283325),#94346); +#283325 = PRESENTATION_STYLE_ASSIGNMENT((#283326)); +#283326 = SURFACE_STYLE_USAGE(.BOTH.,#283327); +#283327 = SURFACE_SIDE_STYLE('',(#283328)); +#283328 = SURFACE_STYLE_FILL_AREA(#283329); +#283329 = FILL_AREA_STYLE('',(#283330)); +#283330 = FILL_AREA_STYLE_COLOUR('',#270441); +#283331 = STYLED_ITEM('color',(#283332),#94377); +#283332 = PRESENTATION_STYLE_ASSIGNMENT((#283333)); +#283333 = SURFACE_STYLE_USAGE(.BOTH.,#283334); +#283334 = SURFACE_SIDE_STYLE('',(#283335)); +#283335 = SURFACE_STYLE_FILL_AREA(#283336); +#283336 = FILL_AREA_STYLE('',(#283337)); +#283337 = FILL_AREA_STYLE_COLOUR('',#270441); +#283338 = STYLED_ITEM('color',(#283339),#94401); +#283339 = PRESENTATION_STYLE_ASSIGNMENT((#283340)); +#283340 = SURFACE_STYLE_USAGE(.BOTH.,#283341); +#283341 = SURFACE_SIDE_STYLE('',(#283342)); +#283342 = SURFACE_STYLE_FILL_AREA(#283343); +#283343 = FILL_AREA_STYLE('',(#283344)); +#283344 = FILL_AREA_STYLE_COLOUR('',#270441); +#283345 = STYLED_ITEM('color',(#283346),#94425); +#283346 = PRESENTATION_STYLE_ASSIGNMENT((#283347)); +#283347 = SURFACE_STYLE_USAGE(.BOTH.,#283348); +#283348 = SURFACE_SIDE_STYLE('',(#283349)); +#283349 = SURFACE_STYLE_FILL_AREA(#283350); +#283350 = FILL_AREA_STYLE('',(#283351)); +#283351 = FILL_AREA_STYLE_COLOUR('',#270441); +#283352 = STYLED_ITEM('color',(#283353),#94449); +#283353 = PRESENTATION_STYLE_ASSIGNMENT((#283354)); +#283354 = SURFACE_STYLE_USAGE(.BOTH.,#283355); +#283355 = SURFACE_SIDE_STYLE('',(#283356)); +#283356 = SURFACE_STYLE_FILL_AREA(#283357); +#283357 = FILL_AREA_STYLE('',(#283358)); +#283358 = FILL_AREA_STYLE_COLOUR('',#270441); +#283359 = STYLED_ITEM('color',(#283360),#94466); +#283360 = PRESENTATION_STYLE_ASSIGNMENT((#283361)); +#283361 = SURFACE_STYLE_USAGE(.BOTH.,#283362); +#283362 = SURFACE_SIDE_STYLE('',(#283363)); +#283363 = SURFACE_STYLE_FILL_AREA(#283364); +#283364 = FILL_AREA_STYLE('',(#283365)); +#283365 = FILL_AREA_STYLE_COLOUR('',#270350); +#283366 = STYLED_ITEM('color',(#283367),#94489); +#283367 = PRESENTATION_STYLE_ASSIGNMENT((#283368)); +#283368 = SURFACE_STYLE_USAGE(.BOTH.,#283369); +#283369 = SURFACE_SIDE_STYLE('',(#283370)); +#283370 = SURFACE_STYLE_FILL_AREA(#283371); +#283371 = FILL_AREA_STYLE('',(#283372)); +#283372 = FILL_AREA_STYLE_COLOUR('',#270441); +#283373 = STYLED_ITEM('color',(#283374),#94506); +#283374 = PRESENTATION_STYLE_ASSIGNMENT((#283375)); +#283375 = SURFACE_STYLE_USAGE(.BOTH.,#283376); +#283376 = SURFACE_SIDE_STYLE('',(#283377)); +#283377 = SURFACE_STYLE_FILL_AREA(#283378); +#283378 = FILL_AREA_STYLE('',(#283379)); +#283379 = FILL_AREA_STYLE_COLOUR('',#270441); +#283380 = STYLED_ITEM('color',(#283381),#94523); +#283381 = PRESENTATION_STYLE_ASSIGNMENT((#283382)); +#283382 = SURFACE_STYLE_USAGE(.BOTH.,#283383); +#283383 = SURFACE_SIDE_STYLE('',(#283384)); +#283384 = SURFACE_STYLE_FILL_AREA(#283385); +#283385 = FILL_AREA_STYLE('',(#283386)); +#283386 = FILL_AREA_STYLE_COLOUR('',#270441); +#283387 = STYLED_ITEM('color',(#283388),#94540); +#283388 = PRESENTATION_STYLE_ASSIGNMENT((#283389)); +#283389 = SURFACE_STYLE_USAGE(.BOTH.,#283390); +#283390 = SURFACE_SIDE_STYLE('',(#283391)); +#283391 = SURFACE_STYLE_FILL_AREA(#283392); +#283392 = FILL_AREA_STYLE('',(#283393)); +#283393 = FILL_AREA_STYLE_COLOUR('',#270441); +#283394 = STYLED_ITEM('color',(#283395),#94557); +#283395 = PRESENTATION_STYLE_ASSIGNMENT((#283396)); +#283396 = SURFACE_STYLE_USAGE(.BOTH.,#283397); +#283397 = SURFACE_SIDE_STYLE('',(#283398)); +#283398 = SURFACE_STYLE_FILL_AREA(#283399); +#283399 = FILL_AREA_STYLE('',(#283400)); +#283400 = FILL_AREA_STYLE_COLOUR('',#270441); +#283401 = STYLED_ITEM('color',(#283402),#94574); +#283402 = PRESENTATION_STYLE_ASSIGNMENT((#283403)); +#283403 = SURFACE_STYLE_USAGE(.BOTH.,#283404); +#283404 = SURFACE_SIDE_STYLE('',(#283405)); +#283405 = SURFACE_STYLE_FILL_AREA(#283406); +#283406 = FILL_AREA_STYLE('',(#283407)); +#283407 = FILL_AREA_STYLE_COLOUR('',#270441); +#283408 = STYLED_ITEM('color',(#283409),#94591); +#283409 = PRESENTATION_STYLE_ASSIGNMENT((#283410)); +#283410 = SURFACE_STYLE_USAGE(.BOTH.,#283411); +#283411 = SURFACE_SIDE_STYLE('',(#283412)); +#283412 = SURFACE_STYLE_FILL_AREA(#283413); +#283413 = FILL_AREA_STYLE('',(#283414)); +#283414 = FILL_AREA_STYLE_COLOUR('',#270441); +#283415 = STYLED_ITEM('color',(#283416),#94608); +#283416 = PRESENTATION_STYLE_ASSIGNMENT((#283417)); +#283417 = SURFACE_STYLE_USAGE(.BOTH.,#283418); +#283418 = SURFACE_SIDE_STYLE('',(#283419)); +#283419 = SURFACE_STYLE_FILL_AREA(#283420); +#283420 = FILL_AREA_STYLE('',(#283421)); +#283421 = FILL_AREA_STYLE_COLOUR('',#270441); +#283422 = STYLED_ITEM('color',(#283423),#94625); +#283423 = PRESENTATION_STYLE_ASSIGNMENT((#283424)); +#283424 = SURFACE_STYLE_USAGE(.BOTH.,#283425); +#283425 = SURFACE_SIDE_STYLE('',(#283426)); +#283426 = SURFACE_STYLE_FILL_AREA(#283427); +#283427 = FILL_AREA_STYLE('',(#283428)); +#283428 = FILL_AREA_STYLE_COLOUR('',#270441); +#283429 = STYLED_ITEM('color',(#283430),#94642); +#283430 = PRESENTATION_STYLE_ASSIGNMENT((#283431)); +#283431 = SURFACE_STYLE_USAGE(.BOTH.,#283432); +#283432 = SURFACE_SIDE_STYLE('',(#283433)); +#283433 = SURFACE_STYLE_FILL_AREA(#283434); +#283434 = FILL_AREA_STYLE('',(#283435)); +#283435 = FILL_AREA_STYLE_COLOUR('',#270441); +#283436 = STYLED_ITEM('color',(#283437),#94659); +#283437 = PRESENTATION_STYLE_ASSIGNMENT((#283438)); +#283438 = SURFACE_STYLE_USAGE(.BOTH.,#283439); +#283439 = SURFACE_SIDE_STYLE('',(#283440)); +#283440 = SURFACE_STYLE_FILL_AREA(#283441); +#283441 = FILL_AREA_STYLE('',(#283442)); +#283442 = FILL_AREA_STYLE_COLOUR('',#270441); +#283443 = STYLED_ITEM('color',(#283444),#94676); +#283444 = PRESENTATION_STYLE_ASSIGNMENT((#283445)); +#283445 = SURFACE_STYLE_USAGE(.BOTH.,#283446); +#283446 = SURFACE_SIDE_STYLE('',(#283447)); +#283447 = SURFACE_STYLE_FILL_AREA(#283448); +#283448 = FILL_AREA_STYLE('',(#283449)); +#283449 = FILL_AREA_STYLE_COLOUR('',#270441); +#283450 = STYLED_ITEM('color',(#283451),#94693); +#283451 = PRESENTATION_STYLE_ASSIGNMENT((#283452)); +#283452 = SURFACE_STYLE_USAGE(.BOTH.,#283453); +#283453 = SURFACE_SIDE_STYLE('',(#283454)); +#283454 = SURFACE_STYLE_FILL_AREA(#283455); +#283455 = FILL_AREA_STYLE('',(#283456)); +#283456 = FILL_AREA_STYLE_COLOUR('',#270441); +#283457 = STYLED_ITEM('color',(#283458),#94705); +#283458 = PRESENTATION_STYLE_ASSIGNMENT((#283459)); +#283459 = SURFACE_STYLE_USAGE(.BOTH.,#283460); +#283460 = SURFACE_SIDE_STYLE('',(#283461)); +#283461 = SURFACE_STYLE_FILL_AREA(#283462); +#283462 = FILL_AREA_STYLE('',(#283463)); +#283463 = FILL_AREA_STYLE_COLOUR('',#270441); +#283464 = STYLED_ITEM('color',(#283465),#94722); +#283465 = PRESENTATION_STYLE_ASSIGNMENT((#283466)); +#283466 = SURFACE_STYLE_USAGE(.BOTH.,#283467); +#283467 = SURFACE_SIDE_STYLE('',(#283468)); +#283468 = SURFACE_STYLE_FILL_AREA(#283469); +#283469 = FILL_AREA_STYLE('',(#283470)); +#283470 = FILL_AREA_STYLE_COLOUR('',#270441); +#283471 = STYLED_ITEM('color',(#283472),#94734); +#283472 = PRESENTATION_STYLE_ASSIGNMENT((#283473)); +#283473 = SURFACE_STYLE_USAGE(.BOTH.,#283474); +#283474 = SURFACE_SIDE_STYLE('',(#283475)); +#283475 = SURFACE_STYLE_FILL_AREA(#283476); +#283476 = FILL_AREA_STYLE('',(#283477)); +#283477 = FILL_AREA_STYLE_COLOUR('',#270441); +#283478 = STYLED_ITEM('color',(#283479),#94751); +#283479 = PRESENTATION_STYLE_ASSIGNMENT((#283480)); +#283480 = SURFACE_STYLE_USAGE(.BOTH.,#283481); +#283481 = SURFACE_SIDE_STYLE('',(#283482)); +#283482 = SURFACE_STYLE_FILL_AREA(#283483); +#283483 = FILL_AREA_STYLE('',(#283484)); +#283484 = FILL_AREA_STYLE_COLOUR('',#270441); +#283485 = STYLED_ITEM('color',(#283486),#94763); +#283486 = PRESENTATION_STYLE_ASSIGNMENT((#283487)); +#283487 = SURFACE_STYLE_USAGE(.BOTH.,#283488); +#283488 = SURFACE_SIDE_STYLE('',(#283489)); +#283489 = SURFACE_STYLE_FILL_AREA(#283490); +#283490 = FILL_AREA_STYLE('',(#283491)); +#283491 = FILL_AREA_STYLE_COLOUR('',#270441); +#283492 = STYLED_ITEM('color',(#283493),#94780); +#283493 = PRESENTATION_STYLE_ASSIGNMENT((#283494)); +#283494 = SURFACE_STYLE_USAGE(.BOTH.,#283495); +#283495 = SURFACE_SIDE_STYLE('',(#283496)); +#283496 = SURFACE_STYLE_FILL_AREA(#283497); +#283497 = FILL_AREA_STYLE('',(#283498)); +#283498 = FILL_AREA_STYLE_COLOUR('',#270441); +#283499 = STYLED_ITEM('color',(#283500),#94792); +#283500 = PRESENTATION_STYLE_ASSIGNMENT((#283501)); +#283501 = SURFACE_STYLE_USAGE(.BOTH.,#283502); +#283502 = SURFACE_SIDE_STYLE('',(#283503)); +#283503 = SURFACE_STYLE_FILL_AREA(#283504); +#283504 = FILL_AREA_STYLE('',(#283505)); +#283505 = FILL_AREA_STYLE_COLOUR('',#270441); +#283506 = STYLED_ITEM('color',(#283507),#94809); +#283507 = PRESENTATION_STYLE_ASSIGNMENT((#283508)); +#283508 = SURFACE_STYLE_USAGE(.BOTH.,#283509); +#283509 = SURFACE_SIDE_STYLE('',(#283510)); +#283510 = SURFACE_STYLE_FILL_AREA(#283511); +#283511 = FILL_AREA_STYLE('',(#283512)); +#283512 = FILL_AREA_STYLE_COLOUR('',#270441); +#283513 = STYLED_ITEM('color',(#283514),#94821); +#283514 = PRESENTATION_STYLE_ASSIGNMENT((#283515)); +#283515 = SURFACE_STYLE_USAGE(.BOTH.,#283516); +#283516 = SURFACE_SIDE_STYLE('',(#283517)); +#283517 = SURFACE_STYLE_FILL_AREA(#283518); +#283518 = FILL_AREA_STYLE('',(#283519)); +#283519 = FILL_AREA_STYLE_COLOUR('',#270441); +#283520 = STYLED_ITEM('color',(#283521),#94838); +#283521 = PRESENTATION_STYLE_ASSIGNMENT((#283522)); +#283522 = SURFACE_STYLE_USAGE(.BOTH.,#283523); +#283523 = SURFACE_SIDE_STYLE('',(#283524)); +#283524 = SURFACE_STYLE_FILL_AREA(#283525); +#283525 = FILL_AREA_STYLE('',(#283526)); +#283526 = FILL_AREA_STYLE_COLOUR('',#270441); +#283527 = STYLED_ITEM('color',(#283528),#94850); +#283528 = PRESENTATION_STYLE_ASSIGNMENT((#283529)); +#283529 = SURFACE_STYLE_USAGE(.BOTH.,#283530); +#283530 = SURFACE_SIDE_STYLE('',(#283531)); +#283531 = SURFACE_STYLE_FILL_AREA(#283532); +#283532 = FILL_AREA_STYLE('',(#283533)); +#283533 = FILL_AREA_STYLE_COLOUR('',#270441); +#283534 = STYLED_ITEM('color',(#283535),#94867); +#283535 = PRESENTATION_STYLE_ASSIGNMENT((#283536)); +#283536 = SURFACE_STYLE_USAGE(.BOTH.,#283537); +#283537 = SURFACE_SIDE_STYLE('',(#283538)); +#283538 = SURFACE_STYLE_FILL_AREA(#283539); +#283539 = FILL_AREA_STYLE('',(#283540)); +#283540 = FILL_AREA_STYLE_COLOUR('',#270441); +#283541 = STYLED_ITEM('color',(#283542),#94879); +#283542 = PRESENTATION_STYLE_ASSIGNMENT((#283543)); +#283543 = SURFACE_STYLE_USAGE(.BOTH.,#283544); +#283544 = SURFACE_SIDE_STYLE('',(#283545)); +#283545 = SURFACE_STYLE_FILL_AREA(#283546); +#283546 = FILL_AREA_STYLE('',(#283547)); +#283547 = FILL_AREA_STYLE_COLOUR('',#270441); +#283548 = STYLED_ITEM('color',(#283549),#94896); +#283549 = PRESENTATION_STYLE_ASSIGNMENT((#283550)); +#283550 = SURFACE_STYLE_USAGE(.BOTH.,#283551); +#283551 = SURFACE_SIDE_STYLE('',(#283552)); +#283552 = SURFACE_STYLE_FILL_AREA(#283553); +#283553 = FILL_AREA_STYLE('',(#283554)); +#283554 = FILL_AREA_STYLE_COLOUR('',#270441); +#283555 = STYLED_ITEM('color',(#283556),#94908); +#283556 = PRESENTATION_STYLE_ASSIGNMENT((#283557)); +#283557 = SURFACE_STYLE_USAGE(.BOTH.,#283558); +#283558 = SURFACE_SIDE_STYLE('',(#283559)); +#283559 = SURFACE_STYLE_FILL_AREA(#283560); +#283560 = FILL_AREA_STYLE('',(#283561)); +#283561 = FILL_AREA_STYLE_COLOUR('',#270441); +#283562 = STYLED_ITEM('color',(#283563),#94925); +#283563 = PRESENTATION_STYLE_ASSIGNMENT((#283564)); +#283564 = SURFACE_STYLE_USAGE(.BOTH.,#283565); +#283565 = SURFACE_SIDE_STYLE('',(#283566)); +#283566 = SURFACE_STYLE_FILL_AREA(#283567); +#283567 = FILL_AREA_STYLE('',(#283568)); +#283568 = FILL_AREA_STYLE_COLOUR('',#270441); +#283569 = STYLED_ITEM('color',(#283570),#94937); +#283570 = PRESENTATION_STYLE_ASSIGNMENT((#283571)); +#283571 = SURFACE_STYLE_USAGE(.BOTH.,#283572); +#283572 = SURFACE_SIDE_STYLE('',(#283573)); +#283573 = SURFACE_STYLE_FILL_AREA(#283574); +#283574 = FILL_AREA_STYLE('',(#283575)); +#283575 = FILL_AREA_STYLE_COLOUR('',#270441); +#283576 = STYLED_ITEM('color',(#283577),#94954); +#283577 = PRESENTATION_STYLE_ASSIGNMENT((#283578)); +#283578 = SURFACE_STYLE_USAGE(.BOTH.,#283579); +#283579 = SURFACE_SIDE_STYLE('',(#283580)); +#283580 = SURFACE_STYLE_FILL_AREA(#283581); +#283581 = FILL_AREA_STYLE('',(#283582)); +#283582 = FILL_AREA_STYLE_COLOUR('',#270441); +#283583 = STYLED_ITEM('color',(#283584),#94971); +#283584 = PRESENTATION_STYLE_ASSIGNMENT((#283585)); +#283585 = SURFACE_STYLE_USAGE(.BOTH.,#283586); +#283586 = SURFACE_SIDE_STYLE('',(#283587)); +#283587 = SURFACE_STYLE_FILL_AREA(#283588); +#283588 = FILL_AREA_STYLE('',(#283589)); +#283589 = FILL_AREA_STYLE_COLOUR('',#270441); +#283590 = STYLED_ITEM('color',(#283591),#94988); +#283591 = PRESENTATION_STYLE_ASSIGNMENT((#283592)); +#283592 = SURFACE_STYLE_USAGE(.BOTH.,#283593); +#283593 = SURFACE_SIDE_STYLE('',(#283594)); +#283594 = SURFACE_STYLE_FILL_AREA(#283595); +#283595 = FILL_AREA_STYLE('',(#283596)); +#283596 = FILL_AREA_STYLE_COLOUR('',#270441); +#283597 = STYLED_ITEM('color',(#283598),#95005); +#283598 = PRESENTATION_STYLE_ASSIGNMENT((#283599)); +#283599 = SURFACE_STYLE_USAGE(.BOTH.,#283600); +#283600 = SURFACE_SIDE_STYLE('',(#283601)); +#283601 = SURFACE_STYLE_FILL_AREA(#283602); +#283602 = FILL_AREA_STYLE('',(#283603)); +#283603 = FILL_AREA_STYLE_COLOUR('',#270441); +#283604 = STYLED_ITEM('color',(#283605),#95022); +#283605 = PRESENTATION_STYLE_ASSIGNMENT((#283606)); +#283606 = SURFACE_STYLE_USAGE(.BOTH.,#283607); +#283607 = SURFACE_SIDE_STYLE('',(#283608)); +#283608 = SURFACE_STYLE_FILL_AREA(#283609); +#283609 = FILL_AREA_STYLE('',(#283610)); +#283610 = FILL_AREA_STYLE_COLOUR('',#270441); +#283611 = STYLED_ITEM('color',(#283612),#95039); +#283612 = PRESENTATION_STYLE_ASSIGNMENT((#283613)); +#283613 = SURFACE_STYLE_USAGE(.BOTH.,#283614); +#283614 = SURFACE_SIDE_STYLE('',(#283615)); +#283615 = SURFACE_STYLE_FILL_AREA(#283616); +#283616 = FILL_AREA_STYLE('',(#283617)); +#283617 = FILL_AREA_STYLE_COLOUR('',#270441); +#283618 = STYLED_ITEM('color',(#283619),#95056); +#283619 = PRESENTATION_STYLE_ASSIGNMENT((#283620)); +#283620 = SURFACE_STYLE_USAGE(.BOTH.,#283621); +#283621 = SURFACE_SIDE_STYLE('',(#283622)); +#283622 = SURFACE_STYLE_FILL_AREA(#283623); +#283623 = FILL_AREA_STYLE('',(#283624)); +#283624 = FILL_AREA_STYLE_COLOUR('',#270441); +#283625 = STYLED_ITEM('color',(#283626),#95073); +#283626 = PRESENTATION_STYLE_ASSIGNMENT((#283627)); +#283627 = SURFACE_STYLE_USAGE(.BOTH.,#283628); +#283628 = SURFACE_SIDE_STYLE('',(#283629)); +#283629 = SURFACE_STYLE_FILL_AREA(#283630); +#283630 = FILL_AREA_STYLE('',(#283631)); +#283631 = FILL_AREA_STYLE_COLOUR('',#270441); +#283632 = STYLED_ITEM('color',(#283633),#95085); +#283633 = PRESENTATION_STYLE_ASSIGNMENT((#283634)); +#283634 = SURFACE_STYLE_USAGE(.BOTH.,#283635); +#283635 = SURFACE_SIDE_STYLE('',(#283636)); +#283636 = SURFACE_STYLE_FILL_AREA(#283637); +#283637 = FILL_AREA_STYLE('',(#283638)); +#283638 = FILL_AREA_STYLE_COLOUR('',#270441); +#283639 = STYLED_ITEM('color',(#283640),#95102); +#283640 = PRESENTATION_STYLE_ASSIGNMENT((#283641)); +#283641 = SURFACE_STYLE_USAGE(.BOTH.,#283642); +#283642 = SURFACE_SIDE_STYLE('',(#283643)); +#283643 = SURFACE_STYLE_FILL_AREA(#283644); +#283644 = FILL_AREA_STYLE('',(#283645)); +#283645 = FILL_AREA_STYLE_COLOUR('',#270441); +#283646 = STYLED_ITEM('color',(#283647),#95114); +#283647 = PRESENTATION_STYLE_ASSIGNMENT((#283648)); +#283648 = SURFACE_STYLE_USAGE(.BOTH.,#283649); +#283649 = SURFACE_SIDE_STYLE('',(#283650)); +#283650 = SURFACE_STYLE_FILL_AREA(#283651); +#283651 = FILL_AREA_STYLE('',(#283652)); +#283652 = FILL_AREA_STYLE_COLOUR('',#270441); +#283653 = STYLED_ITEM('color',(#283654),#95131); +#283654 = PRESENTATION_STYLE_ASSIGNMENT((#283655)); +#283655 = SURFACE_STYLE_USAGE(.BOTH.,#283656); +#283656 = SURFACE_SIDE_STYLE('',(#283657)); +#283657 = SURFACE_STYLE_FILL_AREA(#283658); +#283658 = FILL_AREA_STYLE('',(#283659)); +#283659 = FILL_AREA_STYLE_COLOUR('',#270441); +#283660 = STYLED_ITEM('color',(#283661),#95143); +#283661 = PRESENTATION_STYLE_ASSIGNMENT((#283662)); +#283662 = SURFACE_STYLE_USAGE(.BOTH.,#283663); +#283663 = SURFACE_SIDE_STYLE('',(#283664)); +#283664 = SURFACE_STYLE_FILL_AREA(#283665); +#283665 = FILL_AREA_STYLE('',(#283666)); +#283666 = FILL_AREA_STYLE_COLOUR('',#270441); +#283667 = STYLED_ITEM('color',(#283668),#95160); +#283668 = PRESENTATION_STYLE_ASSIGNMENT((#283669)); +#283669 = SURFACE_STYLE_USAGE(.BOTH.,#283670); +#283670 = SURFACE_SIDE_STYLE('',(#283671)); +#283671 = SURFACE_STYLE_FILL_AREA(#283672); +#283672 = FILL_AREA_STYLE('',(#283673)); +#283673 = FILL_AREA_STYLE_COLOUR('',#270441); +#283674 = STYLED_ITEM('color',(#283675),#95172); +#283675 = PRESENTATION_STYLE_ASSIGNMENT((#283676)); +#283676 = SURFACE_STYLE_USAGE(.BOTH.,#283677); +#283677 = SURFACE_SIDE_STYLE('',(#283678)); +#283678 = SURFACE_STYLE_FILL_AREA(#283679); +#283679 = FILL_AREA_STYLE('',(#283680)); +#283680 = FILL_AREA_STYLE_COLOUR('',#270441); +#283681 = STYLED_ITEM('color',(#283682),#95189); +#283682 = PRESENTATION_STYLE_ASSIGNMENT((#283683)); +#283683 = SURFACE_STYLE_USAGE(.BOTH.,#283684); +#283684 = SURFACE_SIDE_STYLE('',(#283685)); +#283685 = SURFACE_STYLE_FILL_AREA(#283686); +#283686 = FILL_AREA_STYLE('',(#283687)); +#283687 = FILL_AREA_STYLE_COLOUR('',#270441); +#283688 = STYLED_ITEM('color',(#283689),#95206); +#283689 = PRESENTATION_STYLE_ASSIGNMENT((#283690)); +#283690 = SURFACE_STYLE_USAGE(.BOTH.,#283691); +#283691 = SURFACE_SIDE_STYLE('',(#283692)); +#283692 = SURFACE_STYLE_FILL_AREA(#283693); +#283693 = FILL_AREA_STYLE('',(#283694)); +#283694 = FILL_AREA_STYLE_COLOUR('',#270441); +#283695 = STYLED_ITEM('color',(#283696),#95223); +#283696 = PRESENTATION_STYLE_ASSIGNMENT((#283697)); +#283697 = SURFACE_STYLE_USAGE(.BOTH.,#283698); +#283698 = SURFACE_SIDE_STYLE('',(#283699)); +#283699 = SURFACE_STYLE_FILL_AREA(#283700); +#283700 = FILL_AREA_STYLE('',(#283701)); +#283701 = FILL_AREA_STYLE_COLOUR('',#270441); +#283702 = STYLED_ITEM('color',(#283703),#95240); +#283703 = PRESENTATION_STYLE_ASSIGNMENT((#283704)); +#283704 = SURFACE_STYLE_USAGE(.BOTH.,#283705); +#283705 = SURFACE_SIDE_STYLE('',(#283706)); +#283706 = SURFACE_STYLE_FILL_AREA(#283707); +#283707 = FILL_AREA_STYLE('',(#283708)); +#283708 = FILL_AREA_STYLE_COLOUR('',#270441); +#283709 = STYLED_ITEM('color',(#283710),#95257); +#283710 = PRESENTATION_STYLE_ASSIGNMENT((#283711)); +#283711 = SURFACE_STYLE_USAGE(.BOTH.,#283712); +#283712 = SURFACE_SIDE_STYLE('',(#283713)); +#283713 = SURFACE_STYLE_FILL_AREA(#283714); +#283714 = FILL_AREA_STYLE('',(#283715)); +#283715 = FILL_AREA_STYLE_COLOUR('',#270441); +#283716 = STYLED_ITEM('color',(#283717),#95274); +#283717 = PRESENTATION_STYLE_ASSIGNMENT((#283718)); +#283718 = SURFACE_STYLE_USAGE(.BOTH.,#283719); +#283719 = SURFACE_SIDE_STYLE('',(#283720)); +#283720 = SURFACE_STYLE_FILL_AREA(#283721); +#283721 = FILL_AREA_STYLE('',(#283722)); +#283722 = FILL_AREA_STYLE_COLOUR('',#270441); +#283723 = STYLED_ITEM('color',(#283724),#95286); +#283724 = PRESENTATION_STYLE_ASSIGNMENT((#283725)); +#283725 = SURFACE_STYLE_USAGE(.BOTH.,#283726); +#283726 = SURFACE_SIDE_STYLE('',(#283727)); +#283727 = SURFACE_STYLE_FILL_AREA(#283728); +#283728 = FILL_AREA_STYLE('',(#283729)); +#283729 = FILL_AREA_STYLE_COLOUR('',#270441); +#283730 = STYLED_ITEM('color',(#283731),#95303); +#283731 = PRESENTATION_STYLE_ASSIGNMENT((#283732)); +#283732 = SURFACE_STYLE_USAGE(.BOTH.,#283733); +#283733 = SURFACE_SIDE_STYLE('',(#283734)); +#283734 = SURFACE_STYLE_FILL_AREA(#283735); +#283735 = FILL_AREA_STYLE('',(#283736)); +#283736 = FILL_AREA_STYLE_COLOUR('',#270441); +#283737 = STYLED_ITEM('color',(#283738),#95315); +#283738 = PRESENTATION_STYLE_ASSIGNMENT((#283739)); +#283739 = SURFACE_STYLE_USAGE(.BOTH.,#283740); +#283740 = SURFACE_SIDE_STYLE('',(#283741)); +#283741 = SURFACE_STYLE_FILL_AREA(#283742); +#283742 = FILL_AREA_STYLE('',(#283743)); +#283743 = FILL_AREA_STYLE_COLOUR('',#270441); +#283744 = STYLED_ITEM('color',(#283745),#95332); +#283745 = PRESENTATION_STYLE_ASSIGNMENT((#283746)); +#283746 = SURFACE_STYLE_USAGE(.BOTH.,#283747); +#283747 = SURFACE_SIDE_STYLE('',(#283748)); +#283748 = SURFACE_STYLE_FILL_AREA(#283749); +#283749 = FILL_AREA_STYLE('',(#283750)); +#283750 = FILL_AREA_STYLE_COLOUR('',#270441); +#283751 = STYLED_ITEM('color',(#283752),#95344); +#283752 = PRESENTATION_STYLE_ASSIGNMENT((#283753)); +#283753 = SURFACE_STYLE_USAGE(.BOTH.,#283754); +#283754 = SURFACE_SIDE_STYLE('',(#283755)); +#283755 = SURFACE_STYLE_FILL_AREA(#283756); +#283756 = FILL_AREA_STYLE('',(#283757)); +#283757 = FILL_AREA_STYLE_COLOUR('',#270441); +#283758 = STYLED_ITEM('color',(#283759),#95361); +#283759 = PRESENTATION_STYLE_ASSIGNMENT((#283760)); +#283760 = SURFACE_STYLE_USAGE(.BOTH.,#283761); +#283761 = SURFACE_SIDE_STYLE('',(#283762)); +#283762 = SURFACE_STYLE_FILL_AREA(#283763); +#283763 = FILL_AREA_STYLE('',(#283764)); +#283764 = FILL_AREA_STYLE_COLOUR('',#270441); +#283765 = STYLED_ITEM('color',(#283766),#95373); +#283766 = PRESENTATION_STYLE_ASSIGNMENT((#283767)); +#283767 = SURFACE_STYLE_USAGE(.BOTH.,#283768); +#283768 = SURFACE_SIDE_STYLE('',(#283769)); +#283769 = SURFACE_STYLE_FILL_AREA(#283770); +#283770 = FILL_AREA_STYLE('',(#283771)); +#283771 = FILL_AREA_STYLE_COLOUR('',#270441); +#283772 = STYLED_ITEM('color',(#283773),#95390); +#283773 = PRESENTATION_STYLE_ASSIGNMENT((#283774)); +#283774 = SURFACE_STYLE_USAGE(.BOTH.,#283775); +#283775 = SURFACE_SIDE_STYLE('',(#283776)); +#283776 = SURFACE_STYLE_FILL_AREA(#283777); +#283777 = FILL_AREA_STYLE('',(#283778)); +#283778 = FILL_AREA_STYLE_COLOUR('',#270441); +#283779 = STYLED_ITEM('color',(#283780),#95402); +#283780 = PRESENTATION_STYLE_ASSIGNMENT((#283781)); +#283781 = SURFACE_STYLE_USAGE(.BOTH.,#283782); +#283782 = SURFACE_SIDE_STYLE('',(#283783)); +#283783 = SURFACE_STYLE_FILL_AREA(#283784); +#283784 = FILL_AREA_STYLE('',(#283785)); +#283785 = FILL_AREA_STYLE_COLOUR('',#270441); +#283786 = STYLED_ITEM('color',(#283787),#95419); +#283787 = PRESENTATION_STYLE_ASSIGNMENT((#283788)); +#283788 = SURFACE_STYLE_USAGE(.BOTH.,#283789); +#283789 = SURFACE_SIDE_STYLE('',(#283790)); +#283790 = SURFACE_STYLE_FILL_AREA(#283791); +#283791 = FILL_AREA_STYLE('',(#283792)); +#283792 = FILL_AREA_STYLE_COLOUR('',#270441); +#283793 = STYLED_ITEM('color',(#283794),#95431); +#283794 = PRESENTATION_STYLE_ASSIGNMENT((#283795)); +#283795 = SURFACE_STYLE_USAGE(.BOTH.,#283796); +#283796 = SURFACE_SIDE_STYLE('',(#283797)); +#283797 = SURFACE_STYLE_FILL_AREA(#283798); +#283798 = FILL_AREA_STYLE('',(#283799)); +#283799 = FILL_AREA_STYLE_COLOUR('',#270441); +#283800 = STYLED_ITEM('color',(#283801),#95448); +#283801 = PRESENTATION_STYLE_ASSIGNMENT((#283802)); +#283802 = SURFACE_STYLE_USAGE(.BOTH.,#283803); +#283803 = SURFACE_SIDE_STYLE('',(#283804)); +#283804 = SURFACE_STYLE_FILL_AREA(#283805); +#283805 = FILL_AREA_STYLE('',(#283806)); +#283806 = FILL_AREA_STYLE_COLOUR('',#270441); +#283807 = STYLED_ITEM('color',(#283808),#95460); +#283808 = PRESENTATION_STYLE_ASSIGNMENT((#283809)); +#283809 = SURFACE_STYLE_USAGE(.BOTH.,#283810); +#283810 = SURFACE_SIDE_STYLE('',(#283811)); +#283811 = SURFACE_STYLE_FILL_AREA(#283812); +#283812 = FILL_AREA_STYLE('',(#283813)); +#283813 = FILL_AREA_STYLE_COLOUR('',#270441); +#283814 = STYLED_ITEM('color',(#283815),#95477); +#283815 = PRESENTATION_STYLE_ASSIGNMENT((#283816)); +#283816 = SURFACE_STYLE_USAGE(.BOTH.,#283817); +#283817 = SURFACE_SIDE_STYLE('',(#283818)); +#283818 = SURFACE_STYLE_FILL_AREA(#283819); +#283819 = FILL_AREA_STYLE('',(#283820)); +#283820 = FILL_AREA_STYLE_COLOUR('',#270441); +#283821 = STYLED_ITEM('color',(#283822),#95489); +#283822 = PRESENTATION_STYLE_ASSIGNMENT((#283823)); +#283823 = SURFACE_STYLE_USAGE(.BOTH.,#283824); +#283824 = SURFACE_SIDE_STYLE('',(#283825)); +#283825 = SURFACE_STYLE_FILL_AREA(#283826); +#283826 = FILL_AREA_STYLE('',(#283827)); +#283827 = FILL_AREA_STYLE_COLOUR('',#270441); +#283828 = STYLED_ITEM('color',(#283829),#95506); +#283829 = PRESENTATION_STYLE_ASSIGNMENT((#283830)); +#283830 = SURFACE_STYLE_USAGE(.BOTH.,#283831); +#283831 = SURFACE_SIDE_STYLE('',(#283832)); +#283832 = SURFACE_STYLE_FILL_AREA(#283833); +#283833 = FILL_AREA_STYLE('',(#283834)); +#283834 = FILL_AREA_STYLE_COLOUR('',#270441); +#283835 = STYLED_ITEM('color',(#283836),#95518); +#283836 = PRESENTATION_STYLE_ASSIGNMENT((#283837)); +#283837 = SURFACE_STYLE_USAGE(.BOTH.,#283838); +#283838 = SURFACE_SIDE_STYLE('',(#283839)); +#283839 = SURFACE_STYLE_FILL_AREA(#283840); +#283840 = FILL_AREA_STYLE('',(#283841)); +#283841 = FILL_AREA_STYLE_COLOUR('',#270441); +#283842 = STYLED_ITEM('color',(#283843),#95535); +#283843 = PRESENTATION_STYLE_ASSIGNMENT((#283844)); +#283844 = SURFACE_STYLE_USAGE(.BOTH.,#283845); +#283845 = SURFACE_SIDE_STYLE('',(#283846)); +#283846 = SURFACE_STYLE_FILL_AREA(#283847); +#283847 = FILL_AREA_STYLE('',(#283848)); +#283848 = FILL_AREA_STYLE_COLOUR('',#270441); +#283849 = STYLED_ITEM('color',(#283850),#95547); +#283850 = PRESENTATION_STYLE_ASSIGNMENT((#283851)); +#283851 = SURFACE_STYLE_USAGE(.BOTH.,#283852); +#283852 = SURFACE_SIDE_STYLE('',(#283853)); +#283853 = SURFACE_STYLE_FILL_AREA(#283854); +#283854 = FILL_AREA_STYLE('',(#283855)); +#283855 = FILL_AREA_STYLE_COLOUR('',#270441); +#283856 = STYLED_ITEM('color',(#283857),#95560); +#283857 = PRESENTATION_STYLE_ASSIGNMENT((#283858)); +#283858 = SURFACE_STYLE_USAGE(.BOTH.,#283859); +#283859 = SURFACE_SIDE_STYLE('',(#283860)); +#283860 = SURFACE_STYLE_FILL_AREA(#283861); +#283861 = FILL_AREA_STYLE('',(#283862)); +#283862 = FILL_AREA_STYLE_COLOUR('',#271711); +#283863 = STYLED_ITEM('color',(#283864),#95585); +#283864 = PRESENTATION_STYLE_ASSIGNMENT((#283865)); +#283865 = SURFACE_STYLE_USAGE(.BOTH.,#283866); +#283866 = SURFACE_SIDE_STYLE('',(#283867)); +#283867 = SURFACE_STYLE_FILL_AREA(#283868); +#283868 = FILL_AREA_STYLE('',(#283869)); +#283869 = FILL_AREA_STYLE_COLOUR('',#271711); +#283870 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #283871,#283880,#283889,#283898,#283907),#259282); +#283871 = STYLED_ITEM('color',(#283872),#257978); +#283872 = PRESENTATION_STYLE_ASSIGNMENT((#283873)); +#283873 = SURFACE_STYLE_USAGE(.BOTH.,#283874); +#283874 = SURFACE_SIDE_STYLE('',(#283875,#283878)); +#283875 = SURFACE_STYLE_FILL_AREA(#283876); +#283876 = FILL_AREA_STYLE('',(#283877)); +#283877 = FILL_AREA_STYLE_COLOUR('',#272831); +#283878 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#283879)); +#283879 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#283880 = STYLED_ITEM('color',(#283881),#258135); +#283881 = PRESENTATION_STYLE_ASSIGNMENT((#283882)); +#283882 = SURFACE_STYLE_USAGE(.BOTH.,#283883); +#283883 = SURFACE_SIDE_STYLE('',(#283884,#283887)); +#283884 = SURFACE_STYLE_FILL_AREA(#283885); +#283885 = FILL_AREA_STYLE('',(#283886)); +#283886 = FILL_AREA_STYLE_COLOUR('',#272831); +#283887 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#283888)); +#283888 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#283889 = STYLED_ITEM('color',(#283890),#258342); +#283890 = PRESENTATION_STYLE_ASSIGNMENT((#283891)); +#283891 = SURFACE_STYLE_USAGE(.BOTH.,#283892); +#283892 = SURFACE_SIDE_STYLE('',(#283893,#283896)); +#283893 = SURFACE_STYLE_FILL_AREA(#283894); +#283894 = FILL_AREA_STYLE('',(#283895)); +#283895 = FILL_AREA_STYLE_COLOUR('',#272831); +#283896 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#283897)); +#283897 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#283898 = STYLED_ITEM('color',(#283899),#258592); +#283899 = PRESENTATION_STYLE_ASSIGNMENT((#283900)); +#283900 = SURFACE_STYLE_USAGE(.BOTH.,#283901); +#283901 = SURFACE_SIDE_STYLE('',(#283902,#283905)); +#283902 = SURFACE_STYLE_FILL_AREA(#283903); +#283903 = FILL_AREA_STYLE('',(#283904)); +#283904 = FILL_AREA_STYLE_COLOUR('',#272831); +#283905 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#283906)); +#283906 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#283907 = STYLED_ITEM('color',(#283908),#258743); +#283908 = PRESENTATION_STYLE_ASSIGNMENT((#283909)); +#283909 = SURFACE_STYLE_USAGE(.BOTH.,#283910); +#283910 = SURFACE_SIDE_STYLE('',(#283911,#283914)); +#283911 = SURFACE_STYLE_FILL_AREA(#283912); +#283912 = FILL_AREA_STYLE('',(#283913)); +#283913 = FILL_AREA_STYLE_COLOUR('',#272831); +#283914 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #272831,(#283915)); +#283915 = SURFACE_STYLE_TRANSPARENT(0.100000023842); +#283916 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #283917,#283926,#283934,#283941,#283948,#283955,#283962,#283969, + #283976,#283983,#283990,#283997,#284004,#284011,#284018,#284025, + #284032,#284039,#284046,#284053,#284060,#284067,#284074,#284081, + #284088,#284095,#284102,#284109,#284116,#284123,#284130,#284137, + #284144,#284151,#284158,#284165,#284172,#284179,#284186,#284193, + #284200,#284207,#284214,#284221,#284228,#284235,#284242,#284249, + #284256,#284263,#284270,#284277,#284284,#284291,#284298,#284305, + #284312,#284319,#284326,#284333,#284340,#284347,#284354,#284361, + #284368,#284375,#284382,#284389,#284396,#284403,#284410,#284417, + #284424,#284431,#284438,#284445,#284452,#284459,#284466,#284473, + #284480,#284487,#284494,#284501,#284508,#284515,#284522,#284529, + #284536,#284543,#284550,#284557,#284564,#284571,#284578,#284585, + #284592,#284599,#284606,#284613,#284620,#284627,#284634,#284641, + #284648,#284655,#284662,#284669,#284676,#284683,#284690,#284697, + #284704,#284711,#284718,#284725,#284732,#284739,#284746,#284753, + #284760,#284767,#284774,#284781,#284788,#284795,#284802,#284809, + #284816,#284823,#284830,#284837,#284844,#284851,#284858,#284865, + #284872,#284879,#284886,#284893,#284900,#284907,#284916,#284923, + #284930,#284937,#284944,#284951,#284958,#284965,#284972,#284979, + #284986,#284993,#285000,#285007,#285014,#285021,#285028,#285035, + #285042,#285049,#285056,#285063,#285070,#285077,#285084,#285091, + #285098,#285105,#285112,#285119,#285126,#285133,#285140,#285147, + #285154,#285161,#285168,#285175,#285182,#285189,#285196,#285203, + #285210,#285217,#285224,#285231,#285238,#285245,#285252,#285259, + #285266,#285273,#285280,#285287,#285294,#285301,#285308,#285315, + #285322,#285329,#285336,#285343,#285350,#285357,#285364,#285371, + #285378,#285385,#285392,#285399,#285406,#285413,#285420,#285427, + #285434,#285441,#285448,#285455,#285462,#285469,#285476,#285483, + #285490,#285497,#285504,#285511,#285518,#285525,#285532,#285539, + #285546,#285553,#285560,#285567,#285574,#285581,#285588,#285595, + #285602,#285609,#285616,#285623,#285630,#285637,#285644,#285651, + #285658,#285665,#285672,#285679,#285686,#285693,#285700,#285707, + #285714,#285721,#285728,#285735,#285742,#285749,#285756,#285763, + #285770,#285777,#285784,#285791,#285798,#285805,#285812,#285819, + #285826,#285833,#285840,#285847,#285854,#285861,#285868,#285875, + #285882,#285889,#285896,#285903,#285910,#285917,#285924,#285931, + #285938,#285945,#285952,#285959,#285966,#285973,#285982,#285990, + #285997,#286004,#286011,#286018,#286025,#286034,#286041,#286048, + #286055,#286062,#286069,#286076,#286085,#286092,#286099,#286106, + #286113,#286120,#286127,#286136,#286143,#286150,#286157,#286164, + #286171,#286178,#286187,#286194,#286201,#286208,#286215,#286222, + #286229,#286238,#286245,#286252,#286259,#286266,#286273,#286280, + #286289,#286296,#286303,#286310,#286317,#286324,#286331,#286340, + #286347,#286354,#286361,#286368,#286375,#286382,#286391,#286398, + #286405,#286412,#286419,#286426,#286433,#286442,#286449,#286456, + #286463,#286470,#286477,#286484,#286493,#286500,#286507,#286514, + #286521,#286528,#286535,#286544,#286551,#286558,#286565,#286572, + #286579,#286586,#286595,#286602,#286609,#286616,#286623,#286630, + #286637,#286646,#286653,#286660,#286667,#286674,#286681,#286688, + #286697,#286704,#286711,#286718,#286725,#286732,#286739,#286748, + #286755,#286762,#286769,#286776,#286783,#286790,#286799,#286806, + #286813,#286820,#286827,#286834,#286841,#286848,#286855,#286864, + #286871,#286878,#286885,#286892,#286899,#286906,#286913,#286920, + #286929,#286936,#286943,#286950,#286957,#286964,#286971,#286978, + #286985,#286994,#287001,#287008,#287015,#287022,#287029,#287036, + #287043,#287050,#287059,#287066,#287073,#287080,#287087,#287094, + #287101,#287108,#287115,#287124,#287131,#287138,#287145,#287152, + #287159,#287166,#287173,#287180,#287189,#287196,#287203,#287210, + #287217,#287224,#287231,#287238,#287245,#287254,#287261,#287268, + #287275,#287282,#287289,#287296,#287303,#287310,#287319,#287326, + #287333,#287340,#287347,#287354,#287361,#287368,#287375,#287384, + #287391,#287398,#287405,#287412,#287419,#287426,#287433,#287440, + #287449,#287456,#287463,#287470,#287477,#287484,#287491,#287498, + #287505,#287514,#287521,#287528,#287535,#287542,#287549,#287556, + #287563,#287570,#287579,#287586,#287593,#287600,#287607,#287614, + #287621,#287628,#287635,#287644,#287651,#287658,#287665,#287672, + #287679,#287686,#287693,#287700,#287709,#287716,#287723,#287730, + #287737,#287744,#287751,#287758,#287765,#287774,#287781,#287788, + #287795,#287802,#287809,#287816,#287823),#81268); +#283917 = STYLED_ITEM('color',(#283918),#66663); +#283918 = PRESENTATION_STYLE_ASSIGNMENT((#283919,#283924)); +#283919 = SURFACE_STYLE_USAGE(.BOTH.,#283920); +#283920 = SURFACE_SIDE_STYLE('',(#283921)); +#283921 = SURFACE_STYLE_FILL_AREA(#283922); +#283922 = FILL_AREA_STYLE('',(#283923)); +#283923 = FILL_AREA_STYLE_COLOUR('',#281104); +#283924 = CURVE_STYLE('',#283925,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#283925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#283926 = OVER_RIDING_STYLED_ITEM('overriding color',(#283927),#66665, + #283917); +#283927 = PRESENTATION_STYLE_ASSIGNMENT((#283928)); +#283928 = SURFACE_STYLE_USAGE(.BOTH.,#283929); +#283929 = SURFACE_SIDE_STYLE('',(#283930)); +#283930 = SURFACE_STYLE_FILL_AREA(#283931); +#283931 = FILL_AREA_STYLE('',(#283932)); +#283932 = FILL_AREA_STYLE_COLOUR('',#283933); +#283933 = COLOUR_RGB('',0.298000002942,0.298000002942,0.298000002942); +#283934 = OVER_RIDING_STYLED_ITEM('overriding color',(#283935),#66865, + #283917); +#283935 = PRESENTATION_STYLE_ASSIGNMENT((#283936)); +#283936 = SURFACE_STYLE_USAGE(.BOTH.,#283937); +#283937 = SURFACE_SIDE_STYLE('',(#283938)); +#283938 = SURFACE_STYLE_FILL_AREA(#283939); +#283939 = FILL_AREA_STYLE('',(#283940)); +#283940 = FILL_AREA_STYLE_COLOUR('',#283933); +#283941 = OVER_RIDING_STYLED_ITEM('overriding color',(#283942),#67002, + #283917); +#283942 = PRESENTATION_STYLE_ASSIGNMENT((#283943)); +#283943 = SURFACE_STYLE_USAGE(.BOTH.,#283944); +#283944 = SURFACE_SIDE_STYLE('',(#283945)); +#283945 = SURFACE_STYLE_FILL_AREA(#283946); +#283946 = FILL_AREA_STYLE('',(#283947)); +#283947 = FILL_AREA_STYLE_COLOUR('',#283933); +#283948 = OVER_RIDING_STYLED_ITEM('overriding color',(#283949),#67027, + #283917); +#283949 = PRESENTATION_STYLE_ASSIGNMENT((#283950)); +#283950 = SURFACE_STYLE_USAGE(.BOTH.,#283951); +#283951 = SURFACE_SIDE_STYLE('',(#283952)); +#283952 = SURFACE_STYLE_FILL_AREA(#283953); +#283953 = FILL_AREA_STYLE('',(#283954)); +#283954 = FILL_AREA_STYLE_COLOUR('',#283933); +#283955 = OVER_RIDING_STYLED_ITEM('overriding color',(#283956),#67052, + #283917); +#283956 = PRESENTATION_STYLE_ASSIGNMENT((#283957)); +#283957 = SURFACE_STYLE_USAGE(.BOTH.,#283958); +#283958 = SURFACE_SIDE_STYLE('',(#283959)); +#283959 = SURFACE_STYLE_FILL_AREA(#283960); +#283960 = FILL_AREA_STYLE('',(#283961)); +#283961 = FILL_AREA_STYLE_COLOUR('',#283933); +#283962 = OVER_RIDING_STYLED_ITEM('overriding color',(#283963),#67109, + #283917); +#283963 = PRESENTATION_STYLE_ASSIGNMENT((#283964)); +#283964 = SURFACE_STYLE_USAGE(.BOTH.,#283965); +#283965 = SURFACE_SIDE_STYLE('',(#283966)); +#283966 = SURFACE_STYLE_FILL_AREA(#283967); +#283967 = FILL_AREA_STYLE('',(#283968)); +#283968 = FILL_AREA_STYLE_COLOUR('',#283933); +#283969 = OVER_RIDING_STYLED_ITEM('overriding color',(#283970),#67166, + #283917); +#283970 = PRESENTATION_STYLE_ASSIGNMENT((#283971)); +#283971 = SURFACE_STYLE_USAGE(.BOTH.,#283972); +#283972 = SURFACE_SIDE_STYLE('',(#283973)); +#283973 = SURFACE_STYLE_FILL_AREA(#283974); +#283974 = FILL_AREA_STYLE('',(#283975)); +#283975 = FILL_AREA_STYLE_COLOUR('',#283933); +#283976 = OVER_RIDING_STYLED_ITEM('overriding color',(#283977),#67190, + #283917); +#283977 = PRESENTATION_STYLE_ASSIGNMENT((#283978)); +#283978 = SURFACE_STYLE_USAGE(.BOTH.,#283979); +#283979 = SURFACE_SIDE_STYLE('',(#283980)); +#283980 = SURFACE_STYLE_FILL_AREA(#283981); +#283981 = FILL_AREA_STYLE('',(#283982)); +#283982 = FILL_AREA_STYLE_COLOUR('',#283933); +#283983 = OVER_RIDING_STYLED_ITEM('overriding color',(#283984),#67214, + #283917); +#283984 = PRESENTATION_STYLE_ASSIGNMENT((#283985)); +#283985 = SURFACE_STYLE_USAGE(.BOTH.,#283986); +#283986 = SURFACE_SIDE_STYLE('',(#283987)); +#283987 = SURFACE_STYLE_FILL_AREA(#283988); +#283988 = FILL_AREA_STYLE('',(#283989)); +#283989 = FILL_AREA_STYLE_COLOUR('',#283933); +#283990 = OVER_RIDING_STYLED_ITEM('overriding color',(#283991),#67272, + #283917); +#283991 = PRESENTATION_STYLE_ASSIGNMENT((#283992)); +#283992 = SURFACE_STYLE_USAGE(.BOTH.,#283993); +#283993 = SURFACE_SIDE_STYLE('',(#283994)); +#283994 = SURFACE_STYLE_FILL_AREA(#283995); +#283995 = FILL_AREA_STYLE('',(#283996)); +#283996 = FILL_AREA_STYLE_COLOUR('',#283933); +#283997 = OVER_RIDING_STYLED_ITEM('overriding color',(#283998),#67330, + #283917); +#283998 = PRESENTATION_STYLE_ASSIGNMENT((#283999)); +#283999 = SURFACE_STYLE_USAGE(.BOTH.,#284000); +#284000 = SURFACE_SIDE_STYLE('',(#284001)); +#284001 = SURFACE_STYLE_FILL_AREA(#284002); +#284002 = FILL_AREA_STYLE('',(#284003)); +#284003 = FILL_AREA_STYLE_COLOUR('',#283933); +#284004 = OVER_RIDING_STYLED_ITEM('overriding color',(#284005),#67355, + #283917); +#284005 = PRESENTATION_STYLE_ASSIGNMENT((#284006)); +#284006 = SURFACE_STYLE_USAGE(.BOTH.,#284007); +#284007 = SURFACE_SIDE_STYLE('',(#284008)); +#284008 = SURFACE_STYLE_FILL_AREA(#284009); +#284009 = FILL_AREA_STYLE('',(#284010)); +#284010 = FILL_AREA_STYLE_COLOUR('',#283933); +#284011 = OVER_RIDING_STYLED_ITEM('overriding color',(#284012),#67380, + #283917); +#284012 = PRESENTATION_STYLE_ASSIGNMENT((#284013)); +#284013 = SURFACE_STYLE_USAGE(.BOTH.,#284014); +#284014 = SURFACE_SIDE_STYLE('',(#284015)); +#284015 = SURFACE_STYLE_FILL_AREA(#284016); +#284016 = FILL_AREA_STYLE('',(#284017)); +#284017 = FILL_AREA_STYLE_COLOUR('',#283933); +#284018 = OVER_RIDING_STYLED_ITEM('overriding color',(#284019),#67437, + #283917); +#284019 = PRESENTATION_STYLE_ASSIGNMENT((#284020)); +#284020 = SURFACE_STYLE_USAGE(.BOTH.,#284021); +#284021 = SURFACE_SIDE_STYLE('',(#284022)); +#284022 = SURFACE_STYLE_FILL_AREA(#284023); +#284023 = FILL_AREA_STYLE('',(#284024)); +#284024 = FILL_AREA_STYLE_COLOUR('',#283933); +#284025 = OVER_RIDING_STYLED_ITEM('overriding color',(#284026),#67494, + #283917); +#284026 = PRESENTATION_STYLE_ASSIGNMENT((#284027)); +#284027 = SURFACE_STYLE_USAGE(.BOTH.,#284028); +#284028 = SURFACE_SIDE_STYLE('',(#284029)); +#284029 = SURFACE_STYLE_FILL_AREA(#284030); +#284030 = FILL_AREA_STYLE('',(#284031)); +#284031 = FILL_AREA_STYLE_COLOUR('',#283933); +#284032 = OVER_RIDING_STYLED_ITEM('overriding color',(#284033),#67518, + #283917); +#284033 = PRESENTATION_STYLE_ASSIGNMENT((#284034)); +#284034 = SURFACE_STYLE_USAGE(.BOTH.,#284035); +#284035 = SURFACE_SIDE_STYLE('',(#284036)); +#284036 = SURFACE_STYLE_FILL_AREA(#284037); +#284037 = FILL_AREA_STYLE('',(#284038)); +#284038 = FILL_AREA_STYLE_COLOUR('',#283933); +#284039 = OVER_RIDING_STYLED_ITEM('overriding color',(#284040),#67542, + #283917); +#284040 = PRESENTATION_STYLE_ASSIGNMENT((#284041)); +#284041 = SURFACE_STYLE_USAGE(.BOTH.,#284042); +#284042 = SURFACE_SIDE_STYLE('',(#284043)); +#284043 = SURFACE_STYLE_FILL_AREA(#284044); +#284044 = FILL_AREA_STYLE('',(#284045)); +#284045 = FILL_AREA_STYLE_COLOUR('',#283933); +#284046 = OVER_RIDING_STYLED_ITEM('overriding color',(#284047),#67575, + #283917); +#284047 = PRESENTATION_STYLE_ASSIGNMENT((#284048)); +#284048 = SURFACE_STYLE_USAGE(.BOTH.,#284049); +#284049 = SURFACE_SIDE_STYLE('',(#284050)); +#284050 = SURFACE_STYLE_FILL_AREA(#284051); +#284051 = FILL_AREA_STYLE('',(#284052)); +#284052 = FILL_AREA_STYLE_COLOUR('',#283933); +#284053 = OVER_RIDING_STYLED_ITEM('overriding color',(#284054),#67608, + #283917); +#284054 = PRESENTATION_STYLE_ASSIGNMENT((#284055)); +#284055 = SURFACE_STYLE_USAGE(.BOTH.,#284056); +#284056 = SURFACE_SIDE_STYLE('',(#284057)); +#284057 = SURFACE_STYLE_FILL_AREA(#284058); +#284058 = FILL_AREA_STYLE('',(#284059)); +#284059 = FILL_AREA_STYLE_COLOUR('',#283933); +#284060 = OVER_RIDING_STYLED_ITEM('overriding color',(#284061),#67640, + #283917); +#284061 = PRESENTATION_STYLE_ASSIGNMENT((#284062)); +#284062 = SURFACE_STYLE_USAGE(.BOTH.,#284063); +#284063 = SURFACE_SIDE_STYLE('',(#284064)); +#284064 = SURFACE_STYLE_FILL_AREA(#284065); +#284065 = FILL_AREA_STYLE('',(#284066)); +#284066 = FILL_AREA_STYLE_COLOUR('',#283933); +#284067 = OVER_RIDING_STYLED_ITEM('overriding color',(#284068),#67672, + #283917); +#284068 = PRESENTATION_STYLE_ASSIGNMENT((#284069)); +#284069 = SURFACE_STYLE_USAGE(.BOTH.,#284070); +#284070 = SURFACE_SIDE_STYLE('',(#284071)); +#284071 = SURFACE_STYLE_FILL_AREA(#284072); +#284072 = FILL_AREA_STYLE('',(#284073)); +#284073 = FILL_AREA_STYLE_COLOUR('',#283933); +#284074 = OVER_RIDING_STYLED_ITEM('overriding color',(#284075),#67696, + #283917); +#284075 = PRESENTATION_STYLE_ASSIGNMENT((#284076)); +#284076 = SURFACE_STYLE_USAGE(.BOTH.,#284077); +#284077 = SURFACE_SIDE_STYLE('',(#284078)); +#284078 = SURFACE_STYLE_FILL_AREA(#284079); +#284079 = FILL_AREA_STYLE('',(#284080)); +#284080 = FILL_AREA_STYLE_COLOUR('',#283933); +#284081 = OVER_RIDING_STYLED_ITEM('overriding color',(#284082),#67713, + #283917); +#284082 = PRESENTATION_STYLE_ASSIGNMENT((#284083)); +#284083 = SURFACE_STYLE_USAGE(.BOTH.,#284084); +#284084 = SURFACE_SIDE_STYLE('',(#284085)); +#284085 = SURFACE_STYLE_FILL_AREA(#284086); +#284086 = FILL_AREA_STYLE('',(#284087)); +#284087 = FILL_AREA_STYLE_COLOUR('',#283933); +#284088 = OVER_RIDING_STYLED_ITEM('overriding color',(#284089),#67739, + #283917); +#284089 = PRESENTATION_STYLE_ASSIGNMENT((#284090)); +#284090 = SURFACE_STYLE_USAGE(.BOTH.,#284091); +#284091 = SURFACE_SIDE_STYLE('',(#284092)); +#284092 = SURFACE_STYLE_FILL_AREA(#284093); +#284093 = FILL_AREA_STYLE('',(#284094)); +#284094 = FILL_AREA_STYLE_COLOUR('',#283933); +#284095 = OVER_RIDING_STYLED_ITEM('overriding color',(#284096),#67765, + #283917); +#284096 = PRESENTATION_STYLE_ASSIGNMENT((#284097)); +#284097 = SURFACE_STYLE_USAGE(.BOTH.,#284098); +#284098 = SURFACE_SIDE_STYLE('',(#284099)); +#284099 = SURFACE_STYLE_FILL_AREA(#284100); +#284100 = FILL_AREA_STYLE('',(#284101)); +#284101 = FILL_AREA_STYLE_COLOUR('',#283933); +#284102 = OVER_RIDING_STYLED_ITEM('overriding color',(#284103),#67797, + #283917); +#284103 = PRESENTATION_STYLE_ASSIGNMENT((#284104)); +#284104 = SURFACE_STYLE_USAGE(.BOTH.,#284105); +#284105 = SURFACE_SIDE_STYLE('',(#284106)); +#284106 = SURFACE_STYLE_FILL_AREA(#284107); +#284107 = FILL_AREA_STYLE('',(#284108)); +#284108 = FILL_AREA_STYLE_COLOUR('',#283933); +#284109 = OVER_RIDING_STYLED_ITEM('overriding color',(#284110),#67872, + #283917); +#284110 = PRESENTATION_STYLE_ASSIGNMENT((#284111)); +#284111 = SURFACE_STYLE_USAGE(.BOTH.,#284112); +#284112 = SURFACE_SIDE_STYLE('',(#284113)); +#284113 = SURFACE_STYLE_FILL_AREA(#284114); +#284114 = FILL_AREA_STYLE('',(#284115)); +#284115 = FILL_AREA_STYLE_COLOUR('',#283933); +#284116 = OVER_RIDING_STYLED_ITEM('overriding color',(#284117),#67954, + #283917); +#284117 = PRESENTATION_STYLE_ASSIGNMENT((#284118)); +#284118 = SURFACE_STYLE_USAGE(.BOTH.,#284119); +#284119 = SURFACE_SIDE_STYLE('',(#284120)); +#284120 = SURFACE_STYLE_FILL_AREA(#284121); +#284121 = FILL_AREA_STYLE('',(#284122)); +#284122 = FILL_AREA_STYLE_COLOUR('',#283933); +#284123 = OVER_RIDING_STYLED_ITEM('overriding color',(#284124),#67979, + #283917); +#284124 = PRESENTATION_STYLE_ASSIGNMENT((#284125)); +#284125 = SURFACE_STYLE_USAGE(.BOTH.,#284126); +#284126 = SURFACE_SIDE_STYLE('',(#284127)); +#284127 = SURFACE_STYLE_FILL_AREA(#284128); +#284128 = FILL_AREA_STYLE('',(#284129)); +#284129 = FILL_AREA_STYLE_COLOUR('',#283933); +#284130 = OVER_RIDING_STYLED_ITEM('overriding color',(#284131),#67996, + #283917); +#284131 = PRESENTATION_STYLE_ASSIGNMENT((#284132)); +#284132 = SURFACE_STYLE_USAGE(.BOTH.,#284133); +#284133 = SURFACE_SIDE_STYLE('',(#284134)); +#284134 = SURFACE_STYLE_FILL_AREA(#284135); +#284135 = FILL_AREA_STYLE('',(#284136)); +#284136 = FILL_AREA_STYLE_COLOUR('',#283933); +#284137 = OVER_RIDING_STYLED_ITEM('overriding color',(#284138),#68028, + #283917); +#284138 = PRESENTATION_STYLE_ASSIGNMENT((#284139)); +#284139 = SURFACE_STYLE_USAGE(.BOTH.,#284140); +#284140 = SURFACE_SIDE_STYLE('',(#284141)); +#284141 = SURFACE_STYLE_FILL_AREA(#284142); +#284142 = FILL_AREA_STYLE('',(#284143)); +#284143 = FILL_AREA_STYLE_COLOUR('',#283933); +#284144 = OVER_RIDING_STYLED_ITEM('overriding color',(#284145),#68113, + #283917); +#284145 = PRESENTATION_STYLE_ASSIGNMENT((#284146)); +#284146 = SURFACE_STYLE_USAGE(.BOTH.,#284147); +#284147 = SURFACE_SIDE_STYLE('',(#284148)); +#284148 = SURFACE_STYLE_FILL_AREA(#284149); +#284149 = FILL_AREA_STYLE('',(#284150)); +#284150 = FILL_AREA_STYLE_COLOUR('',#283933); +#284151 = OVER_RIDING_STYLED_ITEM('overriding color',(#284152),#68130, + #283917); +#284152 = PRESENTATION_STYLE_ASSIGNMENT((#284153)); +#284153 = SURFACE_STYLE_USAGE(.BOTH.,#284154); +#284154 = SURFACE_SIDE_STYLE('',(#284155)); +#284155 = SURFACE_STYLE_FILL_AREA(#284156); +#284156 = FILL_AREA_STYLE('',(#284157)); +#284157 = FILL_AREA_STYLE_COLOUR('',#283933); +#284158 = OVER_RIDING_STYLED_ITEM('overriding color',(#284159),#68184, + #283917); +#284159 = PRESENTATION_STYLE_ASSIGNMENT((#284160)); +#284160 = SURFACE_STYLE_USAGE(.BOTH.,#284161); +#284161 = SURFACE_SIDE_STYLE('',(#284162)); +#284162 = SURFACE_STYLE_FILL_AREA(#284163); +#284163 = FILL_AREA_STYLE('',(#284164)); +#284164 = FILL_AREA_STYLE_COLOUR('',#283933); +#284165 = OVER_RIDING_STYLED_ITEM('overriding color',(#284166),#68201, + #283917); +#284166 = PRESENTATION_STYLE_ASSIGNMENT((#284167)); +#284167 = SURFACE_STYLE_USAGE(.BOTH.,#284168); +#284168 = SURFACE_SIDE_STYLE('',(#284169)); +#284169 = SURFACE_STYLE_FILL_AREA(#284170); +#284170 = FILL_AREA_STYLE('',(#284171)); +#284171 = FILL_AREA_STYLE_COLOUR('',#283933); +#284172 = OVER_RIDING_STYLED_ITEM('overriding color',(#284173),#68288, + #283917); +#284173 = PRESENTATION_STYLE_ASSIGNMENT((#284174)); +#284174 = SURFACE_STYLE_USAGE(.BOTH.,#284175); +#284175 = SURFACE_SIDE_STYLE('',(#284176)); +#284176 = SURFACE_STYLE_FILL_AREA(#284177); +#284177 = FILL_AREA_STYLE('',(#284178)); +#284178 = FILL_AREA_STYLE_COLOUR('',#283933); +#284179 = OVER_RIDING_STYLED_ITEM('overriding color',(#284180),#68313, + #283917); +#284180 = PRESENTATION_STYLE_ASSIGNMENT((#284181)); +#284181 = SURFACE_STYLE_USAGE(.BOTH.,#284182); +#284182 = SURFACE_SIDE_STYLE('',(#284183)); +#284183 = SURFACE_STYLE_FILL_AREA(#284184); +#284184 = FILL_AREA_STYLE('',(#284185)); +#284185 = FILL_AREA_STYLE_COLOUR('',#283933); +#284186 = OVER_RIDING_STYLED_ITEM('overriding color',(#284187),#68330, + #283917); +#284187 = PRESENTATION_STYLE_ASSIGNMENT((#284188)); +#284188 = SURFACE_STYLE_USAGE(.BOTH.,#284189); +#284189 = SURFACE_SIDE_STYLE('',(#284190)); +#284190 = SURFACE_STYLE_FILL_AREA(#284191); +#284191 = FILL_AREA_STYLE('',(#284192)); +#284192 = FILL_AREA_STYLE_COLOUR('',#283933); +#284193 = OVER_RIDING_STYLED_ITEM('overriding color',(#284194),#68347, + #283917); +#284194 = PRESENTATION_STYLE_ASSIGNMENT((#284195)); +#284195 = SURFACE_STYLE_USAGE(.BOTH.,#284196); +#284196 = SURFACE_SIDE_STYLE('',(#284197)); +#284197 = SURFACE_STYLE_FILL_AREA(#284198); +#284198 = FILL_AREA_STYLE('',(#284199)); +#284199 = FILL_AREA_STYLE_COLOUR('',#283933); +#284200 = OVER_RIDING_STYLED_ITEM('overriding color',(#284201),#68364, + #283917); +#284201 = PRESENTATION_STYLE_ASSIGNMENT((#284202)); +#284202 = SURFACE_STYLE_USAGE(.BOTH.,#284203); +#284203 = SURFACE_SIDE_STYLE('',(#284204)); +#284204 = SURFACE_STYLE_FILL_AREA(#284205); +#284205 = FILL_AREA_STYLE('',(#284206)); +#284206 = FILL_AREA_STYLE_COLOUR('',#283933); +#284207 = OVER_RIDING_STYLED_ITEM('overriding color',(#284208),#68376, + #283917); +#284208 = PRESENTATION_STYLE_ASSIGNMENT((#284209)); +#284209 = SURFACE_STYLE_USAGE(.BOTH.,#284210); +#284210 = SURFACE_SIDE_STYLE('',(#284211)); +#284211 = SURFACE_STYLE_FILL_AREA(#284212); +#284212 = FILL_AREA_STYLE('',(#284213)); +#284213 = FILL_AREA_STYLE_COLOUR('',#283933); +#284214 = OVER_RIDING_STYLED_ITEM('overriding color',(#284215),#68393, + #283917); +#284215 = PRESENTATION_STYLE_ASSIGNMENT((#284216)); +#284216 = SURFACE_STYLE_USAGE(.BOTH.,#284217); +#284217 = SURFACE_SIDE_STYLE('',(#284218)); +#284218 = SURFACE_STYLE_FILL_AREA(#284219); +#284219 = FILL_AREA_STYLE('',(#284220)); +#284220 = FILL_AREA_STYLE_COLOUR('',#283933); +#284221 = OVER_RIDING_STYLED_ITEM('overriding color',(#284222),#68405, + #283917); +#284222 = PRESENTATION_STYLE_ASSIGNMENT((#284223)); +#284223 = SURFACE_STYLE_USAGE(.BOTH.,#284224); +#284224 = SURFACE_SIDE_STYLE('',(#284225)); +#284225 = SURFACE_STYLE_FILL_AREA(#284226); +#284226 = FILL_AREA_STYLE('',(#284227)); +#284227 = FILL_AREA_STYLE_COLOUR('',#283933); +#284228 = OVER_RIDING_STYLED_ITEM('overriding color',(#284229),#68422, + #283917); +#284229 = PRESENTATION_STYLE_ASSIGNMENT((#284230)); +#284230 = SURFACE_STYLE_USAGE(.BOTH.,#284231); +#284231 = SURFACE_SIDE_STYLE('',(#284232)); +#284232 = SURFACE_STYLE_FILL_AREA(#284233); +#284233 = FILL_AREA_STYLE('',(#284234)); +#284234 = FILL_AREA_STYLE_COLOUR('',#283933); +#284235 = OVER_RIDING_STYLED_ITEM('overriding color',(#284236),#68439, + #283917); +#284236 = PRESENTATION_STYLE_ASSIGNMENT((#284237)); +#284237 = SURFACE_STYLE_USAGE(.BOTH.,#284238); +#284238 = SURFACE_SIDE_STYLE('',(#284239)); +#284239 = SURFACE_STYLE_FILL_AREA(#284240); +#284240 = FILL_AREA_STYLE('',(#284241)); +#284241 = FILL_AREA_STYLE_COLOUR('',#283933); +#284242 = OVER_RIDING_STYLED_ITEM('overriding color',(#284243),#68456, + #283917); +#284243 = PRESENTATION_STYLE_ASSIGNMENT((#284244)); +#284244 = SURFACE_STYLE_USAGE(.BOTH.,#284245); +#284245 = SURFACE_SIDE_STYLE('',(#284246)); +#284246 = SURFACE_STYLE_FILL_AREA(#284247); +#284247 = FILL_AREA_STYLE('',(#284248)); +#284248 = FILL_AREA_STYLE_COLOUR('',#283933); +#284249 = OVER_RIDING_STYLED_ITEM('overriding color',(#284250),#68481, + #283917); +#284250 = PRESENTATION_STYLE_ASSIGNMENT((#284251)); +#284251 = SURFACE_STYLE_USAGE(.BOTH.,#284252); +#284252 = SURFACE_SIDE_STYLE('',(#284253)); +#284253 = SURFACE_STYLE_FILL_AREA(#284254); +#284254 = FILL_AREA_STYLE('',(#284255)); +#284255 = FILL_AREA_STYLE_COLOUR('',#283933); +#284256 = OVER_RIDING_STYLED_ITEM('overriding color',(#284257),#68506, + #283917); +#284257 = PRESENTATION_STYLE_ASSIGNMENT((#284258)); +#284258 = SURFACE_STYLE_USAGE(.BOTH.,#284259); +#284259 = SURFACE_SIDE_STYLE('',(#284260)); +#284260 = SURFACE_STYLE_FILL_AREA(#284261); +#284261 = FILL_AREA_STYLE('',(#284262)); +#284262 = FILL_AREA_STYLE_COLOUR('',#283933); +#284263 = OVER_RIDING_STYLED_ITEM('overriding color',(#284264),#68537, + #283917); +#284264 = PRESENTATION_STYLE_ASSIGNMENT((#284265)); +#284265 = SURFACE_STYLE_USAGE(.BOTH.,#284266); +#284266 = SURFACE_SIDE_STYLE('',(#284267)); +#284267 = SURFACE_STYLE_FILL_AREA(#284268); +#284268 = FILL_AREA_STYLE('',(#284269)); +#284269 = FILL_AREA_STYLE_COLOUR('',#283933); +#284270 = OVER_RIDING_STYLED_ITEM('overriding color',(#284271),#68562, + #283917); +#284271 = PRESENTATION_STYLE_ASSIGNMENT((#284272)); +#284272 = SURFACE_STYLE_USAGE(.BOTH.,#284273); +#284273 = SURFACE_SIDE_STYLE('',(#284274)); +#284274 = SURFACE_STYLE_FILL_AREA(#284275); +#284275 = FILL_AREA_STYLE('',(#284276)); +#284276 = FILL_AREA_STYLE_COLOUR('',#283933); +#284277 = OVER_RIDING_STYLED_ITEM('overriding color',(#284278),#68593, + #283917); +#284278 = PRESENTATION_STYLE_ASSIGNMENT((#284279)); +#284279 = SURFACE_STYLE_USAGE(.BOTH.,#284280); +#284280 = SURFACE_SIDE_STYLE('',(#284281)); +#284281 = SURFACE_STYLE_FILL_AREA(#284282); +#284282 = FILL_AREA_STYLE('',(#284283)); +#284283 = FILL_AREA_STYLE_COLOUR('',#283933); +#284284 = OVER_RIDING_STYLED_ITEM('overriding color',(#284285),#68618, + #283917); +#284285 = PRESENTATION_STYLE_ASSIGNMENT((#284286)); +#284286 = SURFACE_STYLE_USAGE(.BOTH.,#284287); +#284287 = SURFACE_SIDE_STYLE('',(#284288)); +#284288 = SURFACE_STYLE_FILL_AREA(#284289); +#284289 = FILL_AREA_STYLE('',(#284290)); +#284290 = FILL_AREA_STYLE_COLOUR('',#283933); +#284291 = OVER_RIDING_STYLED_ITEM('overriding color',(#284292),#68643, + #283917); +#284292 = PRESENTATION_STYLE_ASSIGNMENT((#284293)); +#284293 = SURFACE_STYLE_USAGE(.BOTH.,#284294); +#284294 = SURFACE_SIDE_STYLE('',(#284295)); +#284295 = SURFACE_STYLE_FILL_AREA(#284296); +#284296 = FILL_AREA_STYLE('',(#284297)); +#284297 = FILL_AREA_STYLE_COLOUR('',#283933); +#284298 = OVER_RIDING_STYLED_ITEM('overriding color',(#284299),#68668, + #283917); +#284299 = PRESENTATION_STYLE_ASSIGNMENT((#284300)); +#284300 = SURFACE_STYLE_USAGE(.BOTH.,#284301); +#284301 = SURFACE_SIDE_STYLE('',(#284302)); +#284302 = SURFACE_STYLE_FILL_AREA(#284303); +#284303 = FILL_AREA_STYLE('',(#284304)); +#284304 = FILL_AREA_STYLE_COLOUR('',#283933); +#284305 = OVER_RIDING_STYLED_ITEM('overriding color',(#284306),#68698, + #283917); +#284306 = PRESENTATION_STYLE_ASSIGNMENT((#284307)); +#284307 = SURFACE_STYLE_USAGE(.BOTH.,#284308); +#284308 = SURFACE_SIDE_STYLE('',(#284309)); +#284309 = SURFACE_STYLE_FILL_AREA(#284310); +#284310 = FILL_AREA_STYLE('',(#284311)); +#284311 = FILL_AREA_STYLE_COLOUR('',#283933); +#284312 = OVER_RIDING_STYLED_ITEM('overriding color',(#284313),#68715, + #283917); +#284313 = PRESENTATION_STYLE_ASSIGNMENT((#284314)); +#284314 = SURFACE_STYLE_USAGE(.BOTH.,#284315); +#284315 = SURFACE_SIDE_STYLE('',(#284316)); +#284316 = SURFACE_STYLE_FILL_AREA(#284317); +#284317 = FILL_AREA_STYLE('',(#284318)); +#284318 = FILL_AREA_STYLE_COLOUR('',#283933); +#284319 = OVER_RIDING_STYLED_ITEM('overriding color',(#284320),#68732, + #283917); +#284320 = PRESENTATION_STYLE_ASSIGNMENT((#284321)); +#284321 = SURFACE_STYLE_USAGE(.BOTH.,#284322); +#284322 = SURFACE_SIDE_STYLE('',(#284323)); +#284323 = SURFACE_STYLE_FILL_AREA(#284324); +#284324 = FILL_AREA_STYLE('',(#284325)); +#284325 = FILL_AREA_STYLE_COLOUR('',#283933); +#284326 = OVER_RIDING_STYLED_ITEM('overriding color',(#284327),#68805, + #283917); +#284327 = PRESENTATION_STYLE_ASSIGNMENT((#284328)); +#284328 = SURFACE_STYLE_USAGE(.BOTH.,#284329); +#284329 = SURFACE_SIDE_STYLE('',(#284330)); +#284330 = SURFACE_STYLE_FILL_AREA(#284331); +#284331 = FILL_AREA_STYLE('',(#284332)); +#284332 = FILL_AREA_STYLE_COLOUR('',#283933); +#284333 = OVER_RIDING_STYLED_ITEM('overriding color',(#284334),#68897, + #283917); +#284334 = PRESENTATION_STYLE_ASSIGNMENT((#284335)); +#284335 = SURFACE_STYLE_USAGE(.BOTH.,#284336); +#284336 = SURFACE_SIDE_STYLE('',(#284337)); +#284337 = SURFACE_STYLE_FILL_AREA(#284338); +#284338 = FILL_AREA_STYLE('',(#284339)); +#284339 = FILL_AREA_STYLE_COLOUR('',#283933); +#284340 = OVER_RIDING_STYLED_ITEM('overriding color',(#284341),#68989, + #283917); +#284341 = PRESENTATION_STYLE_ASSIGNMENT((#284342)); +#284342 = SURFACE_STYLE_USAGE(.BOTH.,#284343); +#284343 = SURFACE_SIDE_STYLE('',(#284344)); +#284344 = SURFACE_STYLE_FILL_AREA(#284345); +#284345 = FILL_AREA_STYLE('',(#284346)); +#284346 = FILL_AREA_STYLE_COLOUR('',#283933); +#284347 = OVER_RIDING_STYLED_ITEM('overriding color',(#284348),#69062, + #283917); +#284348 = PRESENTATION_STYLE_ASSIGNMENT((#284349)); +#284349 = SURFACE_STYLE_USAGE(.BOTH.,#284350); +#284350 = SURFACE_SIDE_STYLE('',(#284351)); +#284351 = SURFACE_STYLE_FILL_AREA(#284352); +#284352 = FILL_AREA_STYLE('',(#284353)); +#284353 = FILL_AREA_STYLE_COLOUR('',#283933); +#284354 = OVER_RIDING_STYLED_ITEM('overriding color',(#284355),#69084, + #283917); +#284355 = PRESENTATION_STYLE_ASSIGNMENT((#284356)); +#284356 = SURFACE_STYLE_USAGE(.BOTH.,#284357); +#284357 = SURFACE_SIDE_STYLE('',(#284358)); +#284358 = SURFACE_STYLE_FILL_AREA(#284359); +#284359 = FILL_AREA_STYLE('',(#284360)); +#284360 = FILL_AREA_STYLE_COLOUR('',#283933); +#284361 = OVER_RIDING_STYLED_ITEM('overriding color',(#284362),#69096, + #283917); +#284362 = PRESENTATION_STYLE_ASSIGNMENT((#284363)); +#284363 = SURFACE_STYLE_USAGE(.BOTH.,#284364); +#284364 = SURFACE_SIDE_STYLE('',(#284365)); +#284365 = SURFACE_STYLE_FILL_AREA(#284366); +#284366 = FILL_AREA_STYLE('',(#284367)); +#284367 = FILL_AREA_STYLE_COLOUR('',#283933); +#284368 = OVER_RIDING_STYLED_ITEM('overriding color',(#284369),#69169, + #283917); +#284369 = PRESENTATION_STYLE_ASSIGNMENT((#284370)); +#284370 = SURFACE_STYLE_USAGE(.BOTH.,#284371); +#284371 = SURFACE_SIDE_STYLE('',(#284372)); +#284372 = SURFACE_STYLE_FILL_AREA(#284373); +#284373 = FILL_AREA_STYLE('',(#284374)); +#284374 = FILL_AREA_STYLE_COLOUR('',#283933); +#284375 = OVER_RIDING_STYLED_ITEM('overriding color',(#284376),#69261, + #283917); +#284376 = PRESENTATION_STYLE_ASSIGNMENT((#284377)); +#284377 = SURFACE_STYLE_USAGE(.BOTH.,#284378); +#284378 = SURFACE_SIDE_STYLE('',(#284379)); +#284379 = SURFACE_STYLE_FILL_AREA(#284380); +#284380 = FILL_AREA_STYLE('',(#284381)); +#284381 = FILL_AREA_STYLE_COLOUR('',#283933); +#284382 = OVER_RIDING_STYLED_ITEM('overriding color',(#284383),#69278, + #283917); +#284383 = PRESENTATION_STYLE_ASSIGNMENT((#284384)); +#284384 = SURFACE_STYLE_USAGE(.BOTH.,#284385); +#284385 = SURFACE_SIDE_STYLE('',(#284386)); +#284386 = SURFACE_STYLE_FILL_AREA(#284387); +#284387 = FILL_AREA_STYLE('',(#284388)); +#284388 = FILL_AREA_STYLE_COLOUR('',#283933); +#284389 = OVER_RIDING_STYLED_ITEM('overriding color',(#284390),#69295, + #283917); +#284390 = PRESENTATION_STYLE_ASSIGNMENT((#284391)); +#284391 = SURFACE_STYLE_USAGE(.BOTH.,#284392); +#284392 = SURFACE_SIDE_STYLE('',(#284393)); +#284393 = SURFACE_STYLE_FILL_AREA(#284394); +#284394 = FILL_AREA_STYLE('',(#284395)); +#284395 = FILL_AREA_STYLE_COLOUR('',#283933); +#284396 = OVER_RIDING_STYLED_ITEM('overriding color',(#284397),#69387, + #283917); +#284397 = PRESENTATION_STYLE_ASSIGNMENT((#284398)); +#284398 = SURFACE_STYLE_USAGE(.BOTH.,#284399); +#284399 = SURFACE_SIDE_STYLE('',(#284400)); +#284400 = SURFACE_STYLE_FILL_AREA(#284401); +#284401 = FILL_AREA_STYLE('',(#284402)); +#284402 = FILL_AREA_STYLE_COLOUR('',#283933); +#284403 = OVER_RIDING_STYLED_ITEM('overriding color',(#284404),#69460, + #283917); +#284404 = PRESENTATION_STYLE_ASSIGNMENT((#284405)); +#284405 = SURFACE_STYLE_USAGE(.BOTH.,#284406); +#284406 = SURFACE_SIDE_STYLE('',(#284407)); +#284407 = SURFACE_STYLE_FILL_AREA(#284408); +#284408 = FILL_AREA_STYLE('',(#284409)); +#284409 = FILL_AREA_STYLE_COLOUR('',#283933); +#284410 = OVER_RIDING_STYLED_ITEM('overriding color',(#284411),#69477, + #283917); +#284411 = PRESENTATION_STYLE_ASSIGNMENT((#284412)); +#284412 = SURFACE_STYLE_USAGE(.BOTH.,#284413); +#284413 = SURFACE_SIDE_STYLE('',(#284414)); +#284414 = SURFACE_STYLE_FILL_AREA(#284415); +#284415 = FILL_AREA_STYLE('',(#284416)); +#284416 = FILL_AREA_STYLE_COLOUR('',#283933); +#284417 = OVER_RIDING_STYLED_ITEM('overriding color',(#284418),#69494, + #283917); +#284418 = PRESENTATION_STYLE_ASSIGNMENT((#284419)); +#284419 = SURFACE_STYLE_USAGE(.BOTH.,#284420); +#284420 = SURFACE_SIDE_STYLE('',(#284421)); +#284421 = SURFACE_STYLE_FILL_AREA(#284422); +#284422 = FILL_AREA_STYLE('',(#284423)); +#284423 = FILL_AREA_STYLE_COLOUR('',#283933); +#284424 = OVER_RIDING_STYLED_ITEM('overriding color',(#284425),#69511, + #283917); +#284425 = PRESENTATION_STYLE_ASSIGNMENT((#284426)); +#284426 = SURFACE_STYLE_USAGE(.BOTH.,#284427); +#284427 = SURFACE_SIDE_STYLE('',(#284428)); +#284428 = SURFACE_STYLE_FILL_AREA(#284429); +#284429 = FILL_AREA_STYLE('',(#284430)); +#284430 = FILL_AREA_STYLE_COLOUR('',#283933); +#284431 = OVER_RIDING_STYLED_ITEM('overriding color',(#284432),#69528, + #283917); +#284432 = PRESENTATION_STYLE_ASSIGNMENT((#284433)); +#284433 = SURFACE_STYLE_USAGE(.BOTH.,#284434); +#284434 = SURFACE_SIDE_STYLE('',(#284435)); +#284435 = SURFACE_STYLE_FILL_AREA(#284436); +#284436 = FILL_AREA_STYLE('',(#284437)); +#284437 = FILL_AREA_STYLE_COLOUR('',#283933); +#284438 = OVER_RIDING_STYLED_ITEM('overriding color',(#284439),#69545, + #283917); +#284439 = PRESENTATION_STYLE_ASSIGNMENT((#284440)); +#284440 = SURFACE_STYLE_USAGE(.BOTH.,#284441); +#284441 = SURFACE_SIDE_STYLE('',(#284442)); +#284442 = SURFACE_STYLE_FILL_AREA(#284443); +#284443 = FILL_AREA_STYLE('',(#284444)); +#284444 = FILL_AREA_STYLE_COLOUR('',#283933); +#284445 = OVER_RIDING_STYLED_ITEM('overriding color',(#284446),#69562, + #283917); +#284446 = PRESENTATION_STYLE_ASSIGNMENT((#284447)); +#284447 = SURFACE_STYLE_USAGE(.BOTH.,#284448); +#284448 = SURFACE_SIDE_STYLE('',(#284449)); +#284449 = SURFACE_STYLE_FILL_AREA(#284450); +#284450 = FILL_AREA_STYLE('',(#284451)); +#284451 = FILL_AREA_STYLE_COLOUR('',#283933); +#284452 = OVER_RIDING_STYLED_ITEM('overriding color',(#284453),#69586, + #283917); +#284453 = PRESENTATION_STYLE_ASSIGNMENT((#284454)); +#284454 = SURFACE_STYLE_USAGE(.BOTH.,#284455); +#284455 = SURFACE_SIDE_STYLE('',(#284456)); +#284456 = SURFACE_STYLE_FILL_AREA(#284457); +#284457 = FILL_AREA_STYLE('',(#284458)); +#284458 = FILL_AREA_STYLE_COLOUR('',#283933); +#284459 = OVER_RIDING_STYLED_ITEM('overriding color',(#284460),#69610, + #283917); +#284460 = PRESENTATION_STYLE_ASSIGNMENT((#284461)); +#284461 = SURFACE_STYLE_USAGE(.BOTH.,#284462); +#284462 = SURFACE_SIDE_STYLE('',(#284463)); +#284463 = SURFACE_STYLE_FILL_AREA(#284464); +#284464 = FILL_AREA_STYLE('',(#284465)); +#284465 = FILL_AREA_STYLE_COLOUR('',#283933); +#284466 = OVER_RIDING_STYLED_ITEM('overriding color',(#284467),#69634, + #283917); +#284467 = PRESENTATION_STYLE_ASSIGNMENT((#284468)); +#284468 = SURFACE_STYLE_USAGE(.BOTH.,#284469); +#284469 = SURFACE_SIDE_STYLE('',(#284470)); +#284470 = SURFACE_STYLE_FILL_AREA(#284471); +#284471 = FILL_AREA_STYLE('',(#284472)); +#284472 = FILL_AREA_STYLE_COLOUR('',#283933); +#284473 = OVER_RIDING_STYLED_ITEM('overriding color',(#284474),#69651, + #283917); +#284474 = PRESENTATION_STYLE_ASSIGNMENT((#284475)); +#284475 = SURFACE_STYLE_USAGE(.BOTH.,#284476); +#284476 = SURFACE_SIDE_STYLE('',(#284477)); +#284477 = SURFACE_STYLE_FILL_AREA(#284478); +#284478 = FILL_AREA_STYLE('',(#284479)); +#284479 = FILL_AREA_STYLE_COLOUR('',#283933); +#284480 = OVER_RIDING_STYLED_ITEM('overriding color',(#284481),#69675, + #283917); +#284481 = PRESENTATION_STYLE_ASSIGNMENT((#284482)); +#284482 = SURFACE_STYLE_USAGE(.BOTH.,#284483); +#284483 = SURFACE_SIDE_STYLE('',(#284484)); +#284484 = SURFACE_STYLE_FILL_AREA(#284485); +#284485 = FILL_AREA_STYLE('',(#284486)); +#284486 = FILL_AREA_STYLE_COLOUR('',#283933); +#284487 = OVER_RIDING_STYLED_ITEM('overriding color',(#284488),#69692, + #283917); +#284488 = PRESENTATION_STYLE_ASSIGNMENT((#284489)); +#284489 = SURFACE_STYLE_USAGE(.BOTH.,#284490); +#284490 = SURFACE_SIDE_STYLE('',(#284491)); +#284491 = SURFACE_STYLE_FILL_AREA(#284492); +#284492 = FILL_AREA_STYLE('',(#284493)); +#284493 = FILL_AREA_STYLE_COLOUR('',#283933); +#284494 = OVER_RIDING_STYLED_ITEM('overriding color',(#284495),#69718, + #283917); +#284495 = PRESENTATION_STYLE_ASSIGNMENT((#284496)); +#284496 = SURFACE_STYLE_USAGE(.BOTH.,#284497); +#284497 = SURFACE_SIDE_STYLE('',(#284498)); +#284498 = SURFACE_STYLE_FILL_AREA(#284499); +#284499 = FILL_AREA_STYLE('',(#284500)); +#284500 = FILL_AREA_STYLE_COLOUR('',#283933); +#284501 = OVER_RIDING_STYLED_ITEM('overriding color',(#284502),#69744, + #283917); +#284502 = PRESENTATION_STYLE_ASSIGNMENT((#284503)); +#284503 = SURFACE_STYLE_USAGE(.BOTH.,#284504); +#284504 = SURFACE_SIDE_STYLE('',(#284505)); +#284505 = SURFACE_STYLE_FILL_AREA(#284506); +#284506 = FILL_AREA_STYLE('',(#284507)); +#284507 = FILL_AREA_STYLE_COLOUR('',#283933); +#284508 = OVER_RIDING_STYLED_ITEM('overriding color',(#284509),#69761, + #283917); +#284509 = PRESENTATION_STYLE_ASSIGNMENT((#284510)); +#284510 = SURFACE_STYLE_USAGE(.BOTH.,#284511); +#284511 = SURFACE_SIDE_STYLE('',(#284512)); +#284512 = SURFACE_STYLE_FILL_AREA(#284513); +#284513 = FILL_AREA_STYLE('',(#284514)); +#284514 = FILL_AREA_STYLE_COLOUR('',#283933); +#284515 = OVER_RIDING_STYLED_ITEM('overriding color',(#284516),#69783, + #283917); +#284516 = PRESENTATION_STYLE_ASSIGNMENT((#284517)); +#284517 = SURFACE_STYLE_USAGE(.BOTH.,#284518); +#284518 = SURFACE_SIDE_STYLE('',(#284519)); +#284519 = SURFACE_STYLE_FILL_AREA(#284520); +#284520 = FILL_AREA_STYLE('',(#284521)); +#284521 = FILL_AREA_STYLE_COLOUR('',#283933); +#284522 = OVER_RIDING_STYLED_ITEM('overriding color',(#284523),#69800, + #283917); +#284523 = PRESENTATION_STYLE_ASSIGNMENT((#284524)); +#284524 = SURFACE_STYLE_USAGE(.BOTH.,#284525); +#284525 = SURFACE_SIDE_STYLE('',(#284526)); +#284526 = SURFACE_STYLE_FILL_AREA(#284527); +#284527 = FILL_AREA_STYLE('',(#284528)); +#284528 = FILL_AREA_STYLE_COLOUR('',#283933); +#284529 = OVER_RIDING_STYLED_ITEM('overriding color',(#284530),#69831, + #283917); +#284530 = PRESENTATION_STYLE_ASSIGNMENT((#284531)); +#284531 = SURFACE_STYLE_USAGE(.BOTH.,#284532); +#284532 = SURFACE_SIDE_STYLE('',(#284533)); +#284533 = SURFACE_STYLE_FILL_AREA(#284534); +#284534 = FILL_AREA_STYLE('',(#284535)); +#284535 = FILL_AREA_STYLE_COLOUR('',#283933); +#284536 = OVER_RIDING_STYLED_ITEM('overriding color',(#284537),#69848, + #283917); +#284537 = PRESENTATION_STYLE_ASSIGNMENT((#284538)); +#284538 = SURFACE_STYLE_USAGE(.BOTH.,#284539); +#284539 = SURFACE_SIDE_STYLE('',(#284540)); +#284540 = SURFACE_STYLE_FILL_AREA(#284541); +#284541 = FILL_AREA_STYLE('',(#284542)); +#284542 = FILL_AREA_STYLE_COLOUR('',#283933); +#284543 = OVER_RIDING_STYLED_ITEM('overriding color',(#284544),#69865, + #283917); +#284544 = PRESENTATION_STYLE_ASSIGNMENT((#284545)); +#284545 = SURFACE_STYLE_USAGE(.BOTH.,#284546); +#284546 = SURFACE_SIDE_STYLE('',(#284547)); +#284547 = SURFACE_STYLE_FILL_AREA(#284548); +#284548 = FILL_AREA_STYLE('',(#284549)); +#284549 = FILL_AREA_STYLE_COLOUR('',#283933); +#284550 = OVER_RIDING_STYLED_ITEM('overriding color',(#284551),#69877, + #283917); +#284551 = PRESENTATION_STYLE_ASSIGNMENT((#284552)); +#284552 = SURFACE_STYLE_USAGE(.BOTH.,#284553); +#284553 = SURFACE_SIDE_STYLE('',(#284554)); +#284554 = SURFACE_STYLE_FILL_AREA(#284555); +#284555 = FILL_AREA_STYLE('',(#284556)); +#284556 = FILL_AREA_STYLE_COLOUR('',#283933); +#284557 = OVER_RIDING_STYLED_ITEM('overriding color',(#284558),#69894, + #283917); +#284558 = PRESENTATION_STYLE_ASSIGNMENT((#284559)); +#284559 = SURFACE_STYLE_USAGE(.BOTH.,#284560); +#284560 = SURFACE_SIDE_STYLE('',(#284561)); +#284561 = SURFACE_STYLE_FILL_AREA(#284562); +#284562 = FILL_AREA_STYLE('',(#284563)); +#284563 = FILL_AREA_STYLE_COLOUR('',#283933); +#284564 = OVER_RIDING_STYLED_ITEM('overriding color',(#284565),#69911, + #283917); +#284565 = PRESENTATION_STYLE_ASSIGNMENT((#284566)); +#284566 = SURFACE_STYLE_USAGE(.BOTH.,#284567); +#284567 = SURFACE_SIDE_STYLE('',(#284568)); +#284568 = SURFACE_STYLE_FILL_AREA(#284569); +#284569 = FILL_AREA_STYLE('',(#284570)); +#284570 = FILL_AREA_STYLE_COLOUR('',#283933); +#284571 = OVER_RIDING_STYLED_ITEM('overriding color',(#284572),#69928, + #283917); +#284572 = PRESENTATION_STYLE_ASSIGNMENT((#284573)); +#284573 = SURFACE_STYLE_USAGE(.BOTH.,#284574); +#284574 = SURFACE_SIDE_STYLE('',(#284575)); +#284575 = SURFACE_STYLE_FILL_AREA(#284576); +#284576 = FILL_AREA_STYLE('',(#284577)); +#284577 = FILL_AREA_STYLE_COLOUR('',#283933); +#284578 = OVER_RIDING_STYLED_ITEM('overriding color',(#284579),#69945, + #283917); +#284579 = PRESENTATION_STYLE_ASSIGNMENT((#284580)); +#284580 = SURFACE_STYLE_USAGE(.BOTH.,#284581); +#284581 = SURFACE_SIDE_STYLE('',(#284582)); +#284582 = SURFACE_STYLE_FILL_AREA(#284583); +#284583 = FILL_AREA_STYLE('',(#284584)); +#284584 = FILL_AREA_STYLE_COLOUR('',#283933); +#284585 = OVER_RIDING_STYLED_ITEM('overriding color',(#284586),#69962, + #283917); +#284586 = PRESENTATION_STYLE_ASSIGNMENT((#284587)); +#284587 = SURFACE_STYLE_USAGE(.BOTH.,#284588); +#284588 = SURFACE_SIDE_STYLE('',(#284589)); +#284589 = SURFACE_STYLE_FILL_AREA(#284590); +#284590 = FILL_AREA_STYLE('',(#284591)); +#284591 = FILL_AREA_STYLE_COLOUR('',#283933); +#284592 = OVER_RIDING_STYLED_ITEM('overriding color',(#284593),#69979, + #283917); +#284593 = PRESENTATION_STYLE_ASSIGNMENT((#284594)); +#284594 = SURFACE_STYLE_USAGE(.BOTH.,#284595); +#284595 = SURFACE_SIDE_STYLE('',(#284596)); +#284596 = SURFACE_STYLE_FILL_AREA(#284597); +#284597 = FILL_AREA_STYLE('',(#284598)); +#284598 = FILL_AREA_STYLE_COLOUR('',#283933); +#284599 = OVER_RIDING_STYLED_ITEM('overriding color',(#284600),#69996, + #283917); +#284600 = PRESENTATION_STYLE_ASSIGNMENT((#284601)); +#284601 = SURFACE_STYLE_USAGE(.BOTH.,#284602); +#284602 = SURFACE_SIDE_STYLE('',(#284603)); +#284603 = SURFACE_STYLE_FILL_AREA(#284604); +#284604 = FILL_AREA_STYLE('',(#284605)); +#284605 = FILL_AREA_STYLE_COLOUR('',#283933); +#284606 = OVER_RIDING_STYLED_ITEM('overriding color',(#284607),#70008, + #283917); +#284607 = PRESENTATION_STYLE_ASSIGNMENT((#284608)); +#284608 = SURFACE_STYLE_USAGE(.BOTH.,#284609); +#284609 = SURFACE_SIDE_STYLE('',(#284610)); +#284610 = SURFACE_STYLE_FILL_AREA(#284611); +#284611 = FILL_AREA_STYLE('',(#284612)); +#284612 = FILL_AREA_STYLE_COLOUR('',#283933); +#284613 = OVER_RIDING_STYLED_ITEM('overriding color',(#284614),#70025, + #283917); +#284614 = PRESENTATION_STYLE_ASSIGNMENT((#284615)); +#284615 = SURFACE_STYLE_USAGE(.BOTH.,#284616); +#284616 = SURFACE_SIDE_STYLE('',(#284617)); +#284617 = SURFACE_STYLE_FILL_AREA(#284618); +#284618 = FILL_AREA_STYLE('',(#284619)); +#284619 = FILL_AREA_STYLE_COLOUR('',#283933); +#284620 = OVER_RIDING_STYLED_ITEM('overriding color',(#284621),#70042, + #283917); +#284621 = PRESENTATION_STYLE_ASSIGNMENT((#284622)); +#284622 = SURFACE_STYLE_USAGE(.BOTH.,#284623); +#284623 = SURFACE_SIDE_STYLE('',(#284624)); +#284624 = SURFACE_STYLE_FILL_AREA(#284625); +#284625 = FILL_AREA_STYLE('',(#284626)); +#284626 = FILL_AREA_STYLE_COLOUR('',#283933); +#284627 = OVER_RIDING_STYLED_ITEM('overriding color',(#284628),#70059, + #283917); +#284628 = PRESENTATION_STYLE_ASSIGNMENT((#284629)); +#284629 = SURFACE_STYLE_USAGE(.BOTH.,#284630); +#284630 = SURFACE_SIDE_STYLE('',(#284631)); +#284631 = SURFACE_STYLE_FILL_AREA(#284632); +#284632 = FILL_AREA_STYLE('',(#284633)); +#284633 = FILL_AREA_STYLE_COLOUR('',#283933); +#284634 = OVER_RIDING_STYLED_ITEM('overriding color',(#284635),#70076, + #283917); +#284635 = PRESENTATION_STYLE_ASSIGNMENT((#284636)); +#284636 = SURFACE_STYLE_USAGE(.BOTH.,#284637); +#284637 = SURFACE_SIDE_STYLE('',(#284638)); +#284638 = SURFACE_STYLE_FILL_AREA(#284639); +#284639 = FILL_AREA_STYLE('',(#284640)); +#284640 = FILL_AREA_STYLE_COLOUR('',#283933); +#284641 = OVER_RIDING_STYLED_ITEM('overriding color',(#284642),#70093, + #283917); +#284642 = PRESENTATION_STYLE_ASSIGNMENT((#284643)); +#284643 = SURFACE_STYLE_USAGE(.BOTH.,#284644); +#284644 = SURFACE_SIDE_STYLE('',(#284645)); +#284645 = SURFACE_STYLE_FILL_AREA(#284646); +#284646 = FILL_AREA_STYLE('',(#284647)); +#284647 = FILL_AREA_STYLE_COLOUR('',#283933); +#284648 = OVER_RIDING_STYLED_ITEM('overriding color',(#284649),#70110, + #283917); +#284649 = PRESENTATION_STYLE_ASSIGNMENT((#284650)); +#284650 = SURFACE_STYLE_USAGE(.BOTH.,#284651); +#284651 = SURFACE_SIDE_STYLE('',(#284652)); +#284652 = SURFACE_STYLE_FILL_AREA(#284653); +#284653 = FILL_AREA_STYLE('',(#284654)); +#284654 = FILL_AREA_STYLE_COLOUR('',#283933); +#284655 = OVER_RIDING_STYLED_ITEM('overriding color',(#284656),#70127, + #283917); +#284656 = PRESENTATION_STYLE_ASSIGNMENT((#284657)); +#284657 = SURFACE_STYLE_USAGE(.BOTH.,#284658); +#284658 = SURFACE_SIDE_STYLE('',(#284659)); +#284659 = SURFACE_STYLE_FILL_AREA(#284660); +#284660 = FILL_AREA_STYLE('',(#284661)); +#284661 = FILL_AREA_STYLE_COLOUR('',#283933); +#284662 = OVER_RIDING_STYLED_ITEM('overriding color',(#284663),#70139, + #283917); +#284663 = PRESENTATION_STYLE_ASSIGNMENT((#284664)); +#284664 = SURFACE_STYLE_USAGE(.BOTH.,#284665); +#284665 = SURFACE_SIDE_STYLE('',(#284666)); +#284666 = SURFACE_STYLE_FILL_AREA(#284667); +#284667 = FILL_AREA_STYLE('',(#284668)); +#284668 = FILL_AREA_STYLE_COLOUR('',#283933); +#284669 = OVER_RIDING_STYLED_ITEM('overriding color',(#284670),#70161, + #283917); +#284670 = PRESENTATION_STYLE_ASSIGNMENT((#284671)); +#284671 = SURFACE_STYLE_USAGE(.BOTH.,#284672); +#284672 = SURFACE_SIDE_STYLE('',(#284673)); +#284673 = SURFACE_STYLE_FILL_AREA(#284674); +#284674 = FILL_AREA_STYLE('',(#284675)); +#284675 = FILL_AREA_STYLE_COLOUR('',#283933); +#284676 = OVER_RIDING_STYLED_ITEM('overriding color',(#284677),#70178, + #283917); +#284677 = PRESENTATION_STYLE_ASSIGNMENT((#284678)); +#284678 = SURFACE_STYLE_USAGE(.BOTH.,#284679); +#284679 = SURFACE_SIDE_STYLE('',(#284680)); +#284680 = SURFACE_STYLE_FILL_AREA(#284681); +#284681 = FILL_AREA_STYLE('',(#284682)); +#284682 = FILL_AREA_STYLE_COLOUR('',#283933); +#284683 = OVER_RIDING_STYLED_ITEM('overriding color',(#284684),#70209, + #283917); +#284684 = PRESENTATION_STYLE_ASSIGNMENT((#284685)); +#284685 = SURFACE_STYLE_USAGE(.BOTH.,#284686); +#284686 = SURFACE_SIDE_STYLE('',(#284687)); +#284687 = SURFACE_STYLE_FILL_AREA(#284688); +#284688 = FILL_AREA_STYLE('',(#284689)); +#284689 = FILL_AREA_STYLE_COLOUR('',#283933); +#284690 = OVER_RIDING_STYLED_ITEM('overriding color',(#284691),#70226, + #283917); +#284691 = PRESENTATION_STYLE_ASSIGNMENT((#284692)); +#284692 = SURFACE_STYLE_USAGE(.BOTH.,#284693); +#284693 = SURFACE_SIDE_STYLE('',(#284694)); +#284694 = SURFACE_STYLE_FILL_AREA(#284695); +#284695 = FILL_AREA_STYLE('',(#284696)); +#284696 = FILL_AREA_STYLE_COLOUR('',#283933); +#284697 = OVER_RIDING_STYLED_ITEM('overriding color',(#284698),#70248, + #283917); +#284698 = PRESENTATION_STYLE_ASSIGNMENT((#284699)); +#284699 = SURFACE_STYLE_USAGE(.BOTH.,#284700); +#284700 = SURFACE_SIDE_STYLE('',(#284701)); +#284701 = SURFACE_STYLE_FILL_AREA(#284702); +#284702 = FILL_AREA_STYLE('',(#284703)); +#284703 = FILL_AREA_STYLE_COLOUR('',#283933); +#284704 = OVER_RIDING_STYLED_ITEM('overriding color',(#284705),#70260, + #283917); +#284705 = PRESENTATION_STYLE_ASSIGNMENT((#284706)); +#284706 = SURFACE_STYLE_USAGE(.BOTH.,#284707); +#284707 = SURFACE_SIDE_STYLE('',(#284708)); +#284708 = SURFACE_STYLE_FILL_AREA(#284709); +#284709 = FILL_AREA_STYLE('',(#284710)); +#284710 = FILL_AREA_STYLE_COLOUR('',#283933); +#284711 = OVER_RIDING_STYLED_ITEM('overriding color',(#284712),#70272, + #283917); +#284712 = PRESENTATION_STYLE_ASSIGNMENT((#284713)); +#284713 = SURFACE_STYLE_USAGE(.BOTH.,#284714); +#284714 = SURFACE_SIDE_STYLE('',(#284715)); +#284715 = SURFACE_STYLE_FILL_AREA(#284716); +#284716 = FILL_AREA_STYLE('',(#284717)); +#284717 = FILL_AREA_STYLE_COLOUR('',#283933); +#284718 = OVER_RIDING_STYLED_ITEM('overriding color',(#284719),#70303, + #283917); +#284719 = PRESENTATION_STYLE_ASSIGNMENT((#284720)); +#284720 = SURFACE_STYLE_USAGE(.BOTH.,#284721); +#284721 = SURFACE_SIDE_STYLE('',(#284722)); +#284722 = SURFACE_STYLE_FILL_AREA(#284723); +#284723 = FILL_AREA_STYLE('',(#284724)); +#284724 = FILL_AREA_STYLE_COLOUR('',#283933); +#284725 = OVER_RIDING_STYLED_ITEM('overriding color',(#284726),#70315, + #283917); +#284726 = PRESENTATION_STYLE_ASSIGNMENT((#284727)); +#284727 = SURFACE_STYLE_USAGE(.BOTH.,#284728); +#284728 = SURFACE_SIDE_STYLE('',(#284729)); +#284729 = SURFACE_STYLE_FILL_AREA(#284730); +#284730 = FILL_AREA_STYLE('',(#284731)); +#284731 = FILL_AREA_STYLE_COLOUR('',#283933); +#284732 = OVER_RIDING_STYLED_ITEM('overriding color',(#284733),#70327, + #283917); +#284733 = PRESENTATION_STYLE_ASSIGNMENT((#284734)); +#284734 = SURFACE_STYLE_USAGE(.BOTH.,#284735); +#284735 = SURFACE_SIDE_STYLE('',(#284736)); +#284736 = SURFACE_STYLE_FILL_AREA(#284737); +#284737 = FILL_AREA_STYLE('',(#284738)); +#284738 = FILL_AREA_STYLE_COLOUR('',#283933); +#284739 = OVER_RIDING_STYLED_ITEM('overriding color',(#284740),#70358, + #283917); +#284740 = PRESENTATION_STYLE_ASSIGNMENT((#284741)); +#284741 = SURFACE_STYLE_USAGE(.BOTH.,#284742); +#284742 = SURFACE_SIDE_STYLE('',(#284743)); +#284743 = SURFACE_STYLE_FILL_AREA(#284744); +#284744 = FILL_AREA_STYLE('',(#284745)); +#284745 = FILL_AREA_STYLE_COLOUR('',#283933); +#284746 = OVER_RIDING_STYLED_ITEM('overriding color',(#284747),#70367, + #283917); +#284747 = PRESENTATION_STYLE_ASSIGNMENT((#284748)); +#284748 = SURFACE_STYLE_USAGE(.BOTH.,#284749); +#284749 = SURFACE_SIDE_STYLE('',(#284750)); +#284750 = SURFACE_STYLE_FILL_AREA(#284751); +#284751 = FILL_AREA_STYLE('',(#284752)); +#284752 = FILL_AREA_STYLE_COLOUR('',#283933); +#284753 = OVER_RIDING_STYLED_ITEM('overriding color',(#284754),#70376, + #283917); +#284754 = PRESENTATION_STYLE_ASSIGNMENT((#284755)); +#284755 = SURFACE_STYLE_USAGE(.BOTH.,#284756); +#284756 = SURFACE_SIDE_STYLE('',(#284757)); +#284757 = SURFACE_STYLE_FILL_AREA(#284758); +#284758 = FILL_AREA_STYLE('',(#284759)); +#284759 = FILL_AREA_STYLE_COLOUR('',#283933); +#284760 = OVER_RIDING_STYLED_ITEM('overriding color',(#284761),#70393, + #283917); +#284761 = PRESENTATION_STYLE_ASSIGNMENT((#284762)); +#284762 = SURFACE_STYLE_USAGE(.BOTH.,#284763); +#284763 = SURFACE_SIDE_STYLE('',(#284764)); +#284764 = SURFACE_STYLE_FILL_AREA(#284765); +#284765 = FILL_AREA_STYLE('',(#284766)); +#284766 = FILL_AREA_STYLE_COLOUR('',#283933); +#284767 = OVER_RIDING_STYLED_ITEM('overriding color',(#284768),#70410, + #283917); +#284768 = PRESENTATION_STYLE_ASSIGNMENT((#284769)); +#284769 = SURFACE_STYLE_USAGE(.BOTH.,#284770); +#284770 = SURFACE_SIDE_STYLE('',(#284771)); +#284771 = SURFACE_STYLE_FILL_AREA(#284772); +#284772 = FILL_AREA_STYLE('',(#284773)); +#284773 = FILL_AREA_STYLE_COLOUR('',#283933); +#284774 = OVER_RIDING_STYLED_ITEM('overriding color',(#284775),#70443, + #283917); +#284775 = PRESENTATION_STYLE_ASSIGNMENT((#284776)); +#284776 = SURFACE_STYLE_USAGE(.BOTH.,#284777); +#284777 = SURFACE_SIDE_STYLE('',(#284778)); +#284778 = SURFACE_STYLE_FILL_AREA(#284779); +#284779 = FILL_AREA_STYLE('',(#284780)); +#284780 = FILL_AREA_STYLE_COLOUR('',#283933); +#284781 = OVER_RIDING_STYLED_ITEM('overriding color',(#284782),#70460, + #283917); +#284782 = PRESENTATION_STYLE_ASSIGNMENT((#284783)); +#284783 = SURFACE_STYLE_USAGE(.BOTH.,#284784); +#284784 = SURFACE_SIDE_STYLE('',(#284785)); +#284785 = SURFACE_STYLE_FILL_AREA(#284786); +#284786 = FILL_AREA_STYLE('',(#284787)); +#284787 = FILL_AREA_STYLE_COLOUR('',#283933); +#284788 = OVER_RIDING_STYLED_ITEM('overriding color',(#284789),#70477, + #283917); +#284789 = PRESENTATION_STYLE_ASSIGNMENT((#284790)); +#284790 = SURFACE_STYLE_USAGE(.BOTH.,#284791); +#284791 = SURFACE_SIDE_STYLE('',(#284792)); +#284792 = SURFACE_STYLE_FILL_AREA(#284793); +#284793 = FILL_AREA_STYLE('',(#284794)); +#284794 = FILL_AREA_STYLE_COLOUR('',#283933); +#284795 = OVER_RIDING_STYLED_ITEM('overriding color',(#284796),#70510, + #283917); +#284796 = PRESENTATION_STYLE_ASSIGNMENT((#284797)); +#284797 = SURFACE_STYLE_USAGE(.BOTH.,#284798); +#284798 = SURFACE_SIDE_STYLE('',(#284799)); +#284799 = SURFACE_STYLE_FILL_AREA(#284800); +#284800 = FILL_AREA_STYLE('',(#284801)); +#284801 = FILL_AREA_STYLE_COLOUR('',#283933); +#284802 = OVER_RIDING_STYLED_ITEM('overriding color',(#284803),#70543, + #283917); +#284803 = PRESENTATION_STYLE_ASSIGNMENT((#284804)); +#284804 = SURFACE_STYLE_USAGE(.BOTH.,#284805); +#284805 = SURFACE_SIDE_STYLE('',(#284806)); +#284806 = SURFACE_STYLE_FILL_AREA(#284807); +#284807 = FILL_AREA_STYLE('',(#284808)); +#284808 = FILL_AREA_STYLE_COLOUR('',#283933); +#284809 = OVER_RIDING_STYLED_ITEM('overriding color',(#284810),#70576, + #283917); +#284810 = PRESENTATION_STYLE_ASSIGNMENT((#284811)); +#284811 = SURFACE_STYLE_USAGE(.BOTH.,#284812); +#284812 = SURFACE_SIDE_STYLE('',(#284813)); +#284813 = SURFACE_STYLE_FILL_AREA(#284814); +#284814 = FILL_AREA_STYLE('',(#284815)); +#284815 = FILL_AREA_STYLE_COLOUR('',#283933); +#284816 = OVER_RIDING_STYLED_ITEM('overriding color',(#284817),#70593, + #283917); +#284817 = PRESENTATION_STYLE_ASSIGNMENT((#284818)); +#284818 = SURFACE_STYLE_USAGE(.BOTH.,#284819); +#284819 = SURFACE_SIDE_STYLE('',(#284820)); +#284820 = SURFACE_STYLE_FILL_AREA(#284821); +#284821 = FILL_AREA_STYLE('',(#284822)); +#284822 = FILL_AREA_STYLE_COLOUR('',#283933); +#284823 = OVER_RIDING_STYLED_ITEM('overriding color',(#284824),#70610, + #283917); +#284824 = PRESENTATION_STYLE_ASSIGNMENT((#284825)); +#284825 = SURFACE_STYLE_USAGE(.BOTH.,#284826); +#284826 = SURFACE_SIDE_STYLE('',(#284827)); +#284827 = SURFACE_STYLE_FILL_AREA(#284828); +#284828 = FILL_AREA_STYLE('',(#284829)); +#284829 = FILL_AREA_STYLE_COLOUR('',#283933); +#284830 = OVER_RIDING_STYLED_ITEM('overriding color',(#284831),#70641, + #283917); +#284831 = PRESENTATION_STYLE_ASSIGNMENT((#284832)); +#284832 = SURFACE_STYLE_USAGE(.BOTH.,#284833); +#284833 = SURFACE_SIDE_STYLE('',(#284834)); +#284834 = SURFACE_STYLE_FILL_AREA(#284835); +#284835 = FILL_AREA_STYLE('',(#284836)); +#284836 = FILL_AREA_STYLE_COLOUR('',#283933); +#284837 = OVER_RIDING_STYLED_ITEM('overriding color',(#284838),#70658, + #283917); +#284838 = PRESENTATION_STYLE_ASSIGNMENT((#284839)); +#284839 = SURFACE_STYLE_USAGE(.BOTH.,#284840); +#284840 = SURFACE_SIDE_STYLE('',(#284841)); +#284841 = SURFACE_STYLE_FILL_AREA(#284842); +#284842 = FILL_AREA_STYLE('',(#284843)); +#284843 = FILL_AREA_STYLE_COLOUR('',#283933); +#284844 = OVER_RIDING_STYLED_ITEM('overriding color',(#284845),#70675, + #283917); +#284845 = PRESENTATION_STYLE_ASSIGNMENT((#284846)); +#284846 = SURFACE_STYLE_USAGE(.BOTH.,#284847); +#284847 = SURFACE_SIDE_STYLE('',(#284848)); +#284848 = SURFACE_STYLE_FILL_AREA(#284849); +#284849 = FILL_AREA_STYLE('',(#284850)); +#284850 = FILL_AREA_STYLE_COLOUR('',#283933); +#284851 = OVER_RIDING_STYLED_ITEM('overriding color',(#284852),#70706, + #283917); +#284852 = PRESENTATION_STYLE_ASSIGNMENT((#284853)); +#284853 = SURFACE_STYLE_USAGE(.BOTH.,#284854); +#284854 = SURFACE_SIDE_STYLE('',(#284855)); +#284855 = SURFACE_STYLE_FILL_AREA(#284856); +#284856 = FILL_AREA_STYLE('',(#284857)); +#284857 = FILL_AREA_STYLE_COLOUR('',#283933); +#284858 = OVER_RIDING_STYLED_ITEM('overriding color',(#284859),#70737, + #283917); +#284859 = PRESENTATION_STYLE_ASSIGNMENT((#284860)); +#284860 = SURFACE_STYLE_USAGE(.BOTH.,#284861); +#284861 = SURFACE_SIDE_STYLE('',(#284862)); +#284862 = SURFACE_STYLE_FILL_AREA(#284863); +#284863 = FILL_AREA_STYLE('',(#284864)); +#284864 = FILL_AREA_STYLE_COLOUR('',#283933); +#284865 = OVER_RIDING_STYLED_ITEM('overriding color',(#284866),#70768, + #283917); +#284866 = PRESENTATION_STYLE_ASSIGNMENT((#284867)); +#284867 = SURFACE_STYLE_USAGE(.BOTH.,#284868); +#284868 = SURFACE_SIDE_STYLE('',(#284869)); +#284869 = SURFACE_STYLE_FILL_AREA(#284870); +#284870 = FILL_AREA_STYLE('',(#284871)); +#284871 = FILL_AREA_STYLE_COLOUR('',#283933); +#284872 = OVER_RIDING_STYLED_ITEM('overriding color',(#284873),#70785, + #283917); +#284873 = PRESENTATION_STYLE_ASSIGNMENT((#284874)); +#284874 = SURFACE_STYLE_USAGE(.BOTH.,#284875); +#284875 = SURFACE_SIDE_STYLE('',(#284876)); +#284876 = SURFACE_STYLE_FILL_AREA(#284877); +#284877 = FILL_AREA_STYLE('',(#284878)); +#284878 = FILL_AREA_STYLE_COLOUR('',#283933); +#284879 = OVER_RIDING_STYLED_ITEM('overriding color',(#284880),#70802, + #283917); +#284880 = PRESENTATION_STYLE_ASSIGNMENT((#284881)); +#284881 = SURFACE_STYLE_USAGE(.BOTH.,#284882); +#284882 = SURFACE_SIDE_STYLE('',(#284883)); +#284883 = SURFACE_STYLE_FILL_AREA(#284884); +#284884 = FILL_AREA_STYLE('',(#284885)); +#284885 = FILL_AREA_STYLE_COLOUR('',#283933); +#284886 = OVER_RIDING_STYLED_ITEM('overriding color',(#284887),#70814, + #283917); +#284887 = PRESENTATION_STYLE_ASSIGNMENT((#284888)); +#284888 = SURFACE_STYLE_USAGE(.BOTH.,#284889); +#284889 = SURFACE_SIDE_STYLE('',(#284890)); +#284890 = SURFACE_STYLE_FILL_AREA(#284891); +#284891 = FILL_AREA_STYLE('',(#284892)); +#284892 = FILL_AREA_STYLE_COLOUR('',#283933); +#284893 = OVER_RIDING_STYLED_ITEM('overriding color',(#284894),#70831, + #283917); +#284894 = PRESENTATION_STYLE_ASSIGNMENT((#284895)); +#284895 = SURFACE_STYLE_USAGE(.BOTH.,#284896); +#284896 = SURFACE_SIDE_STYLE('',(#284897)); +#284897 = SURFACE_STYLE_FILL_AREA(#284898); +#284898 = FILL_AREA_STYLE('',(#284899)); +#284899 = FILL_AREA_STYLE_COLOUR('',#283933); +#284900 = OVER_RIDING_STYLED_ITEM('overriding color',(#284901),#70848, + #283917); +#284901 = PRESENTATION_STYLE_ASSIGNMENT((#284902)); +#284902 = SURFACE_STYLE_USAGE(.BOTH.,#284903); +#284903 = SURFACE_SIDE_STYLE('',(#284904)); +#284904 = SURFACE_STYLE_FILL_AREA(#284905); +#284905 = FILL_AREA_STYLE('',(#284906)); +#284906 = FILL_AREA_STYLE_COLOUR('',#283933); +#284907 = STYLED_ITEM('color',(#284908),#70860); +#284908 = PRESENTATION_STYLE_ASSIGNMENT((#284909,#284914)); +#284909 = SURFACE_STYLE_USAGE(.BOTH.,#284910); +#284910 = SURFACE_SIDE_STYLE('',(#284911)); +#284911 = SURFACE_STYLE_FILL_AREA(#284912); +#284912 = FILL_AREA_STYLE('',(#284913)); +#284913 = FILL_AREA_STYLE_COLOUR('',#281104); +#284914 = CURVE_STYLE('',#284915,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#284915 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#284916 = OVER_RIDING_STYLED_ITEM('overriding color',(#284917),#70862, + #284907); +#284917 = PRESENTATION_STYLE_ASSIGNMENT((#284918)); +#284918 = SURFACE_STYLE_USAGE(.BOTH.,#284919); +#284919 = SURFACE_SIDE_STYLE('',(#284920)); +#284920 = SURFACE_STYLE_FILL_AREA(#284921); +#284921 = FILL_AREA_STYLE('',(#284922)); +#284922 = FILL_AREA_STYLE_COLOUR('',#270350); +#284923 = OVER_RIDING_STYLED_ITEM('overriding color',(#284924),#70950, + #284907); +#284924 = PRESENTATION_STYLE_ASSIGNMENT((#284925)); +#284925 = SURFACE_STYLE_USAGE(.BOTH.,#284926); +#284926 = SURFACE_SIDE_STYLE('',(#284927)); +#284927 = SURFACE_STYLE_FILL_AREA(#284928); +#284928 = FILL_AREA_STYLE('',(#284929)); +#284929 = FILL_AREA_STYLE_COLOUR('',#270350); +#284930 = OVER_RIDING_STYLED_ITEM('overriding color',(#284931),#71000, + #284907); +#284931 = PRESENTATION_STYLE_ASSIGNMENT((#284932)); +#284932 = SURFACE_STYLE_USAGE(.BOTH.,#284933); +#284933 = SURFACE_SIDE_STYLE('',(#284934)); +#284934 = SURFACE_STYLE_FILL_AREA(#284935); +#284935 = FILL_AREA_STYLE('',(#284936)); +#284936 = FILL_AREA_STYLE_COLOUR('',#270350); +#284937 = OVER_RIDING_STYLED_ITEM('overriding color',(#284938),#71143, + #284907); +#284938 = PRESENTATION_STYLE_ASSIGNMENT((#284939)); +#284939 = SURFACE_STYLE_USAGE(.BOTH.,#284940); +#284940 = SURFACE_SIDE_STYLE('',(#284941)); +#284941 = SURFACE_STYLE_FILL_AREA(#284942); +#284942 = FILL_AREA_STYLE('',(#284943)); +#284943 = FILL_AREA_STYLE_COLOUR('',#270350); +#284944 = OVER_RIDING_STYLED_ITEM('overriding color',(#284945),#71183, + #284907); +#284945 = PRESENTATION_STYLE_ASSIGNMENT((#284946)); +#284946 = SURFACE_STYLE_USAGE(.BOTH.,#284947); +#284947 = SURFACE_SIDE_STYLE('',(#284948)); +#284948 = SURFACE_STYLE_FILL_AREA(#284949); +#284949 = FILL_AREA_STYLE('',(#284950)); +#284950 = FILL_AREA_STYLE_COLOUR('',#270350); +#284951 = OVER_RIDING_STYLED_ITEM('overriding color',(#284952),#71222, + #284907); +#284952 = PRESENTATION_STYLE_ASSIGNMENT((#284953)); +#284953 = SURFACE_STYLE_USAGE(.BOTH.,#284954); +#284954 = SURFACE_SIDE_STYLE('',(#284955)); +#284955 = SURFACE_STYLE_FILL_AREA(#284956); +#284956 = FILL_AREA_STYLE('',(#284957)); +#284957 = FILL_AREA_STYLE_COLOUR('',#270350); +#284958 = OVER_RIDING_STYLED_ITEM('overriding color',(#284959),#71253, + #284907); +#284959 = PRESENTATION_STYLE_ASSIGNMENT((#284960)); +#284960 = SURFACE_STYLE_USAGE(.BOTH.,#284961); +#284961 = SURFACE_SIDE_STYLE('',(#284962)); +#284962 = SURFACE_STYLE_FILL_AREA(#284963); +#284963 = FILL_AREA_STYLE('',(#284964)); +#284964 = FILL_AREA_STYLE_COLOUR('',#270350); +#284965 = OVER_RIDING_STYLED_ITEM('overriding color',(#284966),#71290, + #284907); +#284966 = PRESENTATION_STYLE_ASSIGNMENT((#284967)); +#284967 = SURFACE_STYLE_USAGE(.BOTH.,#284968); +#284968 = SURFACE_SIDE_STYLE('',(#284969)); +#284969 = SURFACE_STYLE_FILL_AREA(#284970); +#284970 = FILL_AREA_STYLE('',(#284971)); +#284971 = FILL_AREA_STYLE_COLOUR('',#270350); +#284972 = OVER_RIDING_STYLED_ITEM('overriding color',(#284973),#71307, + #284907); +#284973 = PRESENTATION_STYLE_ASSIGNMENT((#284974)); +#284974 = SURFACE_STYLE_USAGE(.BOTH.,#284975); +#284975 = SURFACE_SIDE_STYLE('',(#284976)); +#284976 = SURFACE_STYLE_FILL_AREA(#284977); +#284977 = FILL_AREA_STYLE('',(#284978)); +#284978 = FILL_AREA_STYLE_COLOUR('',#270350); +#284979 = OVER_RIDING_STYLED_ITEM('overriding color',(#284980),#71339, + #284907); +#284980 = PRESENTATION_STYLE_ASSIGNMENT((#284981)); +#284981 = SURFACE_STYLE_USAGE(.BOTH.,#284982); +#284982 = SURFACE_SIDE_STYLE('',(#284983)); +#284983 = SURFACE_STYLE_FILL_AREA(#284984); +#284984 = FILL_AREA_STYLE('',(#284985)); +#284985 = FILL_AREA_STYLE_COLOUR('',#270350); +#284986 = OVER_RIDING_STYLED_ITEM('overriding color',(#284987),#71418, + #284907); +#284987 = PRESENTATION_STYLE_ASSIGNMENT((#284988)); +#284988 = SURFACE_STYLE_USAGE(.BOTH.,#284989); +#284989 = SURFACE_SIDE_STYLE('',(#284990)); +#284990 = SURFACE_STYLE_FILL_AREA(#284991); +#284991 = FILL_AREA_STYLE('',(#284992)); +#284992 = FILL_AREA_STYLE_COLOUR('',#270350); +#284993 = OVER_RIDING_STYLED_ITEM('overriding color',(#284994),#71449, + #284907); +#284994 = PRESENTATION_STYLE_ASSIGNMENT((#284995)); +#284995 = SURFACE_STYLE_USAGE(.BOTH.,#284996); +#284996 = SURFACE_SIDE_STYLE('',(#284997)); +#284997 = SURFACE_STYLE_FILL_AREA(#284998); +#284998 = FILL_AREA_STYLE('',(#284999)); +#284999 = FILL_AREA_STYLE_COLOUR('',#270350); +#285000 = OVER_RIDING_STYLED_ITEM('overriding color',(#285001),#71480, + #284907); +#285001 = PRESENTATION_STYLE_ASSIGNMENT((#285002)); +#285002 = SURFACE_STYLE_USAGE(.BOTH.,#285003); +#285003 = SURFACE_SIDE_STYLE('',(#285004)); +#285004 = SURFACE_STYLE_FILL_AREA(#285005); +#285005 = FILL_AREA_STYLE('',(#285006)); +#285006 = FILL_AREA_STYLE_COLOUR('',#270350); +#285007 = OVER_RIDING_STYLED_ITEM('overriding color',(#285008),#71617, + #284907); +#285008 = PRESENTATION_STYLE_ASSIGNMENT((#285009)); +#285009 = SURFACE_STYLE_USAGE(.BOTH.,#285010); +#285010 = SURFACE_SIDE_STYLE('',(#285011)); +#285011 = SURFACE_STYLE_FILL_AREA(#285012); +#285012 = FILL_AREA_STYLE('',(#285013)); +#285013 = FILL_AREA_STYLE_COLOUR('',#270350); +#285014 = OVER_RIDING_STYLED_ITEM('overriding color',(#285015),#71646, + #284907); +#285015 = PRESENTATION_STYLE_ASSIGNMENT((#285016)); +#285016 = SURFACE_STYLE_USAGE(.BOTH.,#285017); +#285017 = SURFACE_SIDE_STYLE('',(#285018)); +#285018 = SURFACE_STYLE_FILL_AREA(#285019); +#285019 = FILL_AREA_STYLE('',(#285020)); +#285020 = FILL_AREA_STYLE_COLOUR('',#270350); +#285021 = OVER_RIDING_STYLED_ITEM('overriding color',(#285022),#71671, + #284907); +#285022 = PRESENTATION_STYLE_ASSIGNMENT((#285023)); +#285023 = SURFACE_STYLE_USAGE(.BOTH.,#285024); +#285024 = SURFACE_SIDE_STYLE('',(#285025)); +#285025 = SURFACE_STYLE_FILL_AREA(#285026); +#285026 = FILL_AREA_STYLE('',(#285027)); +#285027 = FILL_AREA_STYLE_COLOUR('',#270350); +#285028 = OVER_RIDING_STYLED_ITEM('overriding color',(#285029),#71701, + #284907); +#285029 = PRESENTATION_STYLE_ASSIGNMENT((#285030)); +#285030 = SURFACE_STYLE_USAGE(.BOTH.,#285031); +#285031 = SURFACE_SIDE_STYLE('',(#285032)); +#285032 = SURFACE_STYLE_FILL_AREA(#285033); +#285033 = FILL_AREA_STYLE('',(#285034)); +#285034 = FILL_AREA_STYLE_COLOUR('',#270350); +#285035 = OVER_RIDING_STYLED_ITEM('overriding color',(#285036),#71732, + #284907); +#285036 = PRESENTATION_STYLE_ASSIGNMENT((#285037)); +#285037 = SURFACE_STYLE_USAGE(.BOTH.,#285038); +#285038 = SURFACE_SIDE_STYLE('',(#285039)); +#285039 = SURFACE_STYLE_FILL_AREA(#285040); +#285040 = FILL_AREA_STYLE('',(#285041)); +#285041 = FILL_AREA_STYLE_COLOUR('',#270350); +#285042 = OVER_RIDING_STYLED_ITEM('overriding color',(#285043),#71763, + #284907); +#285043 = PRESENTATION_STYLE_ASSIGNMENT((#285044)); +#285044 = SURFACE_STYLE_USAGE(.BOTH.,#285045); +#285045 = SURFACE_SIDE_STYLE('',(#285046)); +#285046 = SURFACE_STYLE_FILL_AREA(#285047); +#285047 = FILL_AREA_STYLE('',(#285048)); +#285048 = FILL_AREA_STYLE_COLOUR('',#270350); +#285049 = OVER_RIDING_STYLED_ITEM('overriding color',(#285050),#71796, + #284907); +#285050 = PRESENTATION_STYLE_ASSIGNMENT((#285051)); +#285051 = SURFACE_STYLE_USAGE(.BOTH.,#285052); +#285052 = SURFACE_SIDE_STYLE('',(#285053)); +#285053 = SURFACE_STYLE_FILL_AREA(#285054); +#285054 = FILL_AREA_STYLE('',(#285055)); +#285055 = FILL_AREA_STYLE_COLOUR('',#270350); +#285056 = OVER_RIDING_STYLED_ITEM('overriding color',(#285057),#71827, + #284907); +#285057 = PRESENTATION_STYLE_ASSIGNMENT((#285058)); +#285058 = SURFACE_STYLE_USAGE(.BOTH.,#285059); +#285059 = SURFACE_SIDE_STYLE('',(#285060)); +#285060 = SURFACE_STYLE_FILL_AREA(#285061); +#285061 = FILL_AREA_STYLE('',(#285062)); +#285062 = FILL_AREA_STYLE_COLOUR('',#270350); +#285063 = OVER_RIDING_STYLED_ITEM('overriding color',(#285064),#71843, + #284907); +#285064 = PRESENTATION_STYLE_ASSIGNMENT((#285065)); +#285065 = SURFACE_STYLE_USAGE(.BOTH.,#285066); +#285066 = SURFACE_SIDE_STYLE('',(#285067)); +#285067 = SURFACE_STYLE_FILL_AREA(#285068); +#285068 = FILL_AREA_STYLE('',(#285069)); +#285069 = FILL_AREA_STYLE_COLOUR('',#270350); +#285070 = OVER_RIDING_STYLED_ITEM('overriding color',(#285071),#71860, + #284907); +#285071 = PRESENTATION_STYLE_ASSIGNMENT((#285072)); +#285072 = SURFACE_STYLE_USAGE(.BOTH.,#285073); +#285073 = SURFACE_SIDE_STYLE('',(#285074)); +#285074 = SURFACE_STYLE_FILL_AREA(#285075); +#285075 = FILL_AREA_STYLE('',(#285076)); +#285076 = FILL_AREA_STYLE_COLOUR('',#270350); +#285077 = OVER_RIDING_STYLED_ITEM('overriding color',(#285078),#71892, + #284907); +#285078 = PRESENTATION_STYLE_ASSIGNMENT((#285079)); +#285079 = SURFACE_STYLE_USAGE(.BOTH.,#285080); +#285080 = SURFACE_SIDE_STYLE('',(#285081)); +#285081 = SURFACE_STYLE_FILL_AREA(#285082); +#285082 = FILL_AREA_STYLE('',(#285083)); +#285083 = FILL_AREA_STYLE_COLOUR('',#270350); +#285084 = OVER_RIDING_STYLED_ITEM('overriding color',(#285085),#71972, + #284907); +#285085 = PRESENTATION_STYLE_ASSIGNMENT((#285086)); +#285086 = SURFACE_STYLE_USAGE(.BOTH.,#285087); +#285087 = SURFACE_SIDE_STYLE('',(#285088)); +#285088 = SURFACE_STYLE_FILL_AREA(#285089); +#285089 = FILL_AREA_STYLE('',(#285090)); +#285090 = FILL_AREA_STYLE_COLOUR('',#270350); +#285091 = OVER_RIDING_STYLED_ITEM('overriding color',(#285092),#72003, + #284907); +#285092 = PRESENTATION_STYLE_ASSIGNMENT((#285093)); +#285093 = SURFACE_STYLE_USAGE(.BOTH.,#285094); +#285094 = SURFACE_SIDE_STYLE('',(#285095)); +#285095 = SURFACE_STYLE_FILL_AREA(#285096); +#285096 = FILL_AREA_STYLE('',(#285097)); +#285097 = FILL_AREA_STYLE_COLOUR('',#270350); +#285098 = OVER_RIDING_STYLED_ITEM('overriding color',(#285099),#72050, + #284907); +#285099 = PRESENTATION_STYLE_ASSIGNMENT((#285100)); +#285100 = SURFACE_STYLE_USAGE(.BOTH.,#285101); +#285101 = SURFACE_SIDE_STYLE('',(#285102)); +#285102 = SURFACE_STYLE_FILL_AREA(#285103); +#285103 = FILL_AREA_STYLE('',(#285104)); +#285104 = FILL_AREA_STYLE_COLOUR('',#270350); +#285105 = OVER_RIDING_STYLED_ITEM('overriding color',(#285106),#72081, + #284907); +#285106 = PRESENTATION_STYLE_ASSIGNMENT((#285107)); +#285107 = SURFACE_STYLE_USAGE(.BOTH.,#285108); +#285108 = SURFACE_SIDE_STYLE('',(#285109)); +#285109 = SURFACE_STYLE_FILL_AREA(#285110); +#285110 = FILL_AREA_STYLE('',(#285111)); +#285111 = FILL_AREA_STYLE_COLOUR('',#270350); +#285112 = OVER_RIDING_STYLED_ITEM('overriding color',(#285113),#72128, + #284907); +#285113 = PRESENTATION_STYLE_ASSIGNMENT((#285114)); +#285114 = SURFACE_STYLE_USAGE(.BOTH.,#285115); +#285115 = SURFACE_SIDE_STYLE('',(#285116)); +#285116 = SURFACE_STYLE_FILL_AREA(#285117); +#285117 = FILL_AREA_STYLE('',(#285118)); +#285118 = FILL_AREA_STYLE_COLOUR('',#270350); +#285119 = OVER_RIDING_STYLED_ITEM('overriding color',(#285120),#72159, + #284907); +#285120 = PRESENTATION_STYLE_ASSIGNMENT((#285121)); +#285121 = SURFACE_STYLE_USAGE(.BOTH.,#285122); +#285122 = SURFACE_SIDE_STYLE('',(#285123)); +#285123 = SURFACE_STYLE_FILL_AREA(#285124); +#285124 = FILL_AREA_STYLE('',(#285125)); +#285125 = FILL_AREA_STYLE_COLOUR('',#270350); +#285126 = OVER_RIDING_STYLED_ITEM('overriding color',(#285127),#72222, + #284907); +#285127 = PRESENTATION_STYLE_ASSIGNMENT((#285128)); +#285128 = SURFACE_STYLE_USAGE(.BOTH.,#285129); +#285129 = SURFACE_SIDE_STYLE('',(#285130)); +#285130 = SURFACE_STYLE_FILL_AREA(#285131); +#285131 = FILL_AREA_STYLE('',(#285132)); +#285132 = FILL_AREA_STYLE_COLOUR('',#270350); +#285133 = OVER_RIDING_STYLED_ITEM('overriding color',(#285134),#72253, + #284907); +#285134 = PRESENTATION_STYLE_ASSIGNMENT((#285135)); +#285135 = SURFACE_STYLE_USAGE(.BOTH.,#285136); +#285136 = SURFACE_SIDE_STYLE('',(#285137)); +#285137 = SURFACE_STYLE_FILL_AREA(#285138); +#285138 = FILL_AREA_STYLE('',(#285139)); +#285139 = FILL_AREA_STYLE_COLOUR('',#270350); +#285140 = OVER_RIDING_STYLED_ITEM('overriding color',(#285141),#72316, + #284907); +#285141 = PRESENTATION_STYLE_ASSIGNMENT((#285142)); +#285142 = SURFACE_STYLE_USAGE(.BOTH.,#285143); +#285143 = SURFACE_SIDE_STYLE('',(#285144)); +#285144 = SURFACE_STYLE_FILL_AREA(#285145); +#285145 = FILL_AREA_STYLE('',(#285146)); +#285146 = FILL_AREA_STYLE_COLOUR('',#270350); +#285147 = OVER_RIDING_STYLED_ITEM('overriding color',(#285148),#72347, + #284907); +#285148 = PRESENTATION_STYLE_ASSIGNMENT((#285149)); +#285149 = SURFACE_STYLE_USAGE(.BOTH.,#285150); +#285150 = SURFACE_SIDE_STYLE('',(#285151)); +#285151 = SURFACE_STYLE_FILL_AREA(#285152); +#285152 = FILL_AREA_STYLE('',(#285153)); +#285153 = FILL_AREA_STYLE_COLOUR('',#270350); +#285154 = OVER_RIDING_STYLED_ITEM('overriding color',(#285155),#72394, + #284907); +#285155 = PRESENTATION_STYLE_ASSIGNMENT((#285156)); +#285156 = SURFACE_STYLE_USAGE(.BOTH.,#285157); +#285157 = SURFACE_SIDE_STYLE('',(#285158)); +#285158 = SURFACE_STYLE_FILL_AREA(#285159); +#285159 = FILL_AREA_STYLE('',(#285160)); +#285160 = FILL_AREA_STYLE_COLOUR('',#270350); +#285161 = OVER_RIDING_STYLED_ITEM('overriding color',(#285162),#72425, + #284907); +#285162 = PRESENTATION_STYLE_ASSIGNMENT((#285163)); +#285163 = SURFACE_STYLE_USAGE(.BOTH.,#285164); +#285164 = SURFACE_SIDE_STYLE('',(#285165)); +#285165 = SURFACE_STYLE_FILL_AREA(#285166); +#285166 = FILL_AREA_STYLE('',(#285167)); +#285167 = FILL_AREA_STYLE_COLOUR('',#270350); +#285168 = OVER_RIDING_STYLED_ITEM('overriding color',(#285169),#72472, + #284907); +#285169 = PRESENTATION_STYLE_ASSIGNMENT((#285170)); +#285170 = SURFACE_STYLE_USAGE(.BOTH.,#285171); +#285171 = SURFACE_SIDE_STYLE('',(#285172)); +#285172 = SURFACE_STYLE_FILL_AREA(#285173); +#285173 = FILL_AREA_STYLE('',(#285174)); +#285174 = FILL_AREA_STYLE_COLOUR('',#270350); +#285175 = OVER_RIDING_STYLED_ITEM('overriding color',(#285176),#72503, + #284907); +#285176 = PRESENTATION_STYLE_ASSIGNMENT((#285177)); +#285177 = SURFACE_STYLE_USAGE(.BOTH.,#285178); +#285178 = SURFACE_SIDE_STYLE('',(#285179)); +#285179 = SURFACE_STYLE_FILL_AREA(#285180); +#285180 = FILL_AREA_STYLE('',(#285181)); +#285181 = FILL_AREA_STYLE_COLOUR('',#270350); +#285182 = OVER_RIDING_STYLED_ITEM('overriding color',(#285183),#72584, + #284907); +#285183 = PRESENTATION_STYLE_ASSIGNMENT((#285184)); +#285184 = SURFACE_STYLE_USAGE(.BOTH.,#285185); +#285185 = SURFACE_SIDE_STYLE('',(#285186)); +#285186 = SURFACE_STYLE_FILL_AREA(#285187); +#285187 = FILL_AREA_STYLE('',(#285188)); +#285188 = FILL_AREA_STYLE_COLOUR('',#270350); +#285189 = OVER_RIDING_STYLED_ITEM('overriding color',(#285190),#72606, + #284907); +#285190 = PRESENTATION_STYLE_ASSIGNMENT((#285191)); +#285191 = SURFACE_STYLE_USAGE(.BOTH.,#285192); +#285192 = SURFACE_SIDE_STYLE('',(#285193)); +#285193 = SURFACE_STYLE_FILL_AREA(#285194); +#285194 = FILL_AREA_STYLE('',(#285195)); +#285195 = FILL_AREA_STYLE_COLOUR('',#270350); +#285196 = OVER_RIDING_STYLED_ITEM('overriding color',(#285197),#72628, + #284907); +#285197 = PRESENTATION_STYLE_ASSIGNMENT((#285198)); +#285198 = SURFACE_STYLE_USAGE(.BOTH.,#285199); +#285199 = SURFACE_SIDE_STYLE('',(#285200)); +#285200 = SURFACE_STYLE_FILL_AREA(#285201); +#285201 = FILL_AREA_STYLE('',(#285202)); +#285202 = FILL_AREA_STYLE_COLOUR('',#270350); +#285203 = OVER_RIDING_STYLED_ITEM('overriding color',(#285204),#72640, + #284907); +#285204 = PRESENTATION_STYLE_ASSIGNMENT((#285205)); +#285205 = SURFACE_STYLE_USAGE(.BOTH.,#285206); +#285206 = SURFACE_SIDE_STYLE('',(#285207)); +#285207 = SURFACE_STYLE_FILL_AREA(#285208); +#285208 = FILL_AREA_STYLE('',(#285209)); +#285209 = FILL_AREA_STYLE_COLOUR('',#270350); +#285210 = OVER_RIDING_STYLED_ITEM('overriding color',(#285211),#72657, + #284907); +#285211 = PRESENTATION_STYLE_ASSIGNMENT((#285212)); +#285212 = SURFACE_STYLE_USAGE(.BOTH.,#285213); +#285213 = SURFACE_SIDE_STYLE('',(#285214)); +#285214 = SURFACE_STYLE_FILL_AREA(#285215); +#285215 = FILL_AREA_STYLE('',(#285216)); +#285216 = FILL_AREA_STYLE_COLOUR('',#270350); +#285217 = OVER_RIDING_STYLED_ITEM('overriding color',(#285218),#72674, + #284907); +#285218 = PRESENTATION_STYLE_ASSIGNMENT((#285219)); +#285219 = SURFACE_STYLE_USAGE(.BOTH.,#285220); +#285220 = SURFACE_SIDE_STYLE('',(#285221)); +#285221 = SURFACE_STYLE_FILL_AREA(#285222); +#285222 = FILL_AREA_STYLE('',(#285223)); +#285223 = FILL_AREA_STYLE_COLOUR('',#270350); +#285224 = OVER_RIDING_STYLED_ITEM('overriding color',(#285225),#72696, + #284907); +#285225 = PRESENTATION_STYLE_ASSIGNMENT((#285226)); +#285226 = SURFACE_STYLE_USAGE(.BOTH.,#285227); +#285227 = SURFACE_SIDE_STYLE('',(#285228)); +#285228 = SURFACE_STYLE_FILL_AREA(#285229); +#285229 = FILL_AREA_STYLE('',(#285230)); +#285230 = FILL_AREA_STYLE_COLOUR('',#270350); +#285231 = OVER_RIDING_STYLED_ITEM('overriding color',(#285232),#72708, + #284907); +#285232 = PRESENTATION_STYLE_ASSIGNMENT((#285233)); +#285233 = SURFACE_STYLE_USAGE(.BOTH.,#285234); +#285234 = SURFACE_SIDE_STYLE('',(#285235)); +#285235 = SURFACE_STYLE_FILL_AREA(#285236); +#285236 = FILL_AREA_STYLE('',(#285237)); +#285237 = FILL_AREA_STYLE_COLOUR('',#270350); +#285238 = OVER_RIDING_STYLED_ITEM('overriding color',(#285239),#72735, + #284907); +#285239 = PRESENTATION_STYLE_ASSIGNMENT((#285240)); +#285240 = SURFACE_STYLE_USAGE(.BOTH.,#285241); +#285241 = SURFACE_SIDE_STYLE('',(#285242)); +#285242 = SURFACE_STYLE_FILL_AREA(#285243); +#285243 = FILL_AREA_STYLE('',(#285244)); +#285244 = FILL_AREA_STYLE_COLOUR('',#270350); +#285245 = OVER_RIDING_STYLED_ITEM('overriding color',(#285246),#72752, + #284907); +#285246 = PRESENTATION_STYLE_ASSIGNMENT((#285247)); +#285247 = SURFACE_STYLE_USAGE(.BOTH.,#285248); +#285248 = SURFACE_SIDE_STYLE('',(#285249)); +#285249 = SURFACE_STYLE_FILL_AREA(#285250); +#285250 = FILL_AREA_STYLE('',(#285251)); +#285251 = FILL_AREA_STYLE_COLOUR('',#270350); +#285252 = OVER_RIDING_STYLED_ITEM('overriding color',(#285253),#72769, + #284907); +#285253 = PRESENTATION_STYLE_ASSIGNMENT((#285254)); +#285254 = SURFACE_STYLE_USAGE(.BOTH.,#285255); +#285255 = SURFACE_SIDE_STYLE('',(#285256)); +#285256 = SURFACE_STYLE_FILL_AREA(#285257); +#285257 = FILL_AREA_STYLE('',(#285258)); +#285258 = FILL_AREA_STYLE_COLOUR('',#270350); +#285259 = OVER_RIDING_STYLED_ITEM('overriding color',(#285260),#72786, + #284907); +#285260 = PRESENTATION_STYLE_ASSIGNMENT((#285261)); +#285261 = SURFACE_STYLE_USAGE(.BOTH.,#285262); +#285262 = SURFACE_SIDE_STYLE('',(#285263)); +#285263 = SURFACE_STYLE_FILL_AREA(#285264); +#285264 = FILL_AREA_STYLE('',(#285265)); +#285265 = FILL_AREA_STYLE_COLOUR('',#270350); +#285266 = OVER_RIDING_STYLED_ITEM('overriding color',(#285267),#72808, + #284907); +#285267 = PRESENTATION_STYLE_ASSIGNMENT((#285268)); +#285268 = SURFACE_STYLE_USAGE(.BOTH.,#285269); +#285269 = SURFACE_SIDE_STYLE('',(#285270)); +#285270 = SURFACE_STYLE_FILL_AREA(#285271); +#285271 = FILL_AREA_STYLE('',(#285272)); +#285272 = FILL_AREA_STYLE_COLOUR('',#270350); +#285273 = OVER_RIDING_STYLED_ITEM('overriding color',(#285274),#72829, + #284907); +#285274 = PRESENTATION_STYLE_ASSIGNMENT((#285275)); +#285275 = SURFACE_STYLE_USAGE(.BOTH.,#285276); +#285276 = SURFACE_SIDE_STYLE('',(#285277)); +#285277 = SURFACE_STYLE_FILL_AREA(#285278); +#285278 = FILL_AREA_STYLE('',(#285279)); +#285279 = FILL_AREA_STYLE_COLOUR('',#270350); +#285280 = OVER_RIDING_STYLED_ITEM('overriding color',(#285281),#72846, + #284907); +#285281 = PRESENTATION_STYLE_ASSIGNMENT((#285282)); +#285282 = SURFACE_STYLE_USAGE(.BOTH.,#285283); +#285283 = SURFACE_SIDE_STYLE('',(#285284)); +#285284 = SURFACE_STYLE_FILL_AREA(#285285); +#285285 = FILL_AREA_STYLE('',(#285286)); +#285286 = FILL_AREA_STYLE_COLOUR('',#270350); +#285287 = OVER_RIDING_STYLED_ITEM('overriding color',(#285288),#72863, + #284907); +#285288 = PRESENTATION_STYLE_ASSIGNMENT((#285289)); +#285289 = SURFACE_STYLE_USAGE(.BOTH.,#285290); +#285290 = SURFACE_SIDE_STYLE('',(#285291)); +#285291 = SURFACE_STYLE_FILL_AREA(#285292); +#285292 = FILL_AREA_STYLE('',(#285293)); +#285293 = FILL_AREA_STYLE_COLOUR('',#270350); +#285294 = OVER_RIDING_STYLED_ITEM('overriding color',(#285295),#72880, + #284907); +#285295 = PRESENTATION_STYLE_ASSIGNMENT((#285296)); +#285296 = SURFACE_STYLE_USAGE(.BOTH.,#285297); +#285297 = SURFACE_SIDE_STYLE('',(#285298)); +#285298 = SURFACE_STYLE_FILL_AREA(#285299); +#285299 = FILL_AREA_STYLE('',(#285300)); +#285300 = FILL_AREA_STYLE_COLOUR('',#270350); +#285301 = OVER_RIDING_STYLED_ITEM('overriding color',(#285302),#72901, + #284907); +#285302 = PRESENTATION_STYLE_ASSIGNMENT((#285303)); +#285303 = SURFACE_STYLE_USAGE(.BOTH.,#285304); +#285304 = SURFACE_SIDE_STYLE('',(#285305)); +#285305 = SURFACE_STYLE_FILL_AREA(#285306); +#285306 = FILL_AREA_STYLE('',(#285307)); +#285307 = FILL_AREA_STYLE_COLOUR('',#270350); +#285308 = OVER_RIDING_STYLED_ITEM('overriding color',(#285309),#72918, + #284907); +#285309 = PRESENTATION_STYLE_ASSIGNMENT((#285310)); +#285310 = SURFACE_STYLE_USAGE(.BOTH.,#285311); +#285311 = SURFACE_SIDE_STYLE('',(#285312)); +#285312 = SURFACE_STYLE_FILL_AREA(#285313); +#285313 = FILL_AREA_STYLE('',(#285314)); +#285314 = FILL_AREA_STYLE_COLOUR('',#270350); +#285315 = OVER_RIDING_STYLED_ITEM('overriding color',(#285316),#72930, + #284907); +#285316 = PRESENTATION_STYLE_ASSIGNMENT((#285317)); +#285317 = SURFACE_STYLE_USAGE(.BOTH.,#285318); +#285318 = SURFACE_SIDE_STYLE('',(#285319)); +#285319 = SURFACE_STYLE_FILL_AREA(#285320); +#285320 = FILL_AREA_STYLE('',(#285321)); +#285321 = FILL_AREA_STYLE_COLOUR('',#270350); +#285322 = OVER_RIDING_STYLED_ITEM('overriding color',(#285323),#72948, + #284907); +#285323 = PRESENTATION_STYLE_ASSIGNMENT((#285324)); +#285324 = SURFACE_STYLE_USAGE(.BOTH.,#285325); +#285325 = SURFACE_SIDE_STYLE('',(#285326)); +#285326 = SURFACE_STYLE_FILL_AREA(#285327); +#285327 = FILL_AREA_STYLE('',(#285328)); +#285328 = FILL_AREA_STYLE_COLOUR('',#270350); +#285329 = OVER_RIDING_STYLED_ITEM('overriding color',(#285330),#72971, + #284907); +#285330 = PRESENTATION_STYLE_ASSIGNMENT((#285331)); +#285331 = SURFACE_STYLE_USAGE(.BOTH.,#285332); +#285332 = SURFACE_SIDE_STYLE('',(#285333)); +#285333 = SURFACE_STYLE_FILL_AREA(#285334); +#285334 = FILL_AREA_STYLE('',(#285335)); +#285335 = FILL_AREA_STYLE_COLOUR('',#270350); +#285336 = OVER_RIDING_STYLED_ITEM('overriding color',(#285337),#72989, + #284907); +#285337 = PRESENTATION_STYLE_ASSIGNMENT((#285338)); +#285338 = SURFACE_STYLE_USAGE(.BOTH.,#285339); +#285339 = SURFACE_SIDE_STYLE('',(#285340)); +#285340 = SURFACE_STYLE_FILL_AREA(#285341); +#285341 = FILL_AREA_STYLE('',(#285342)); +#285342 = FILL_AREA_STYLE_COLOUR('',#270350); +#285343 = OVER_RIDING_STYLED_ITEM('overriding color',(#285344),#73005, + #284907); +#285344 = PRESENTATION_STYLE_ASSIGNMENT((#285345)); +#285345 = SURFACE_STYLE_USAGE(.BOTH.,#285346); +#285346 = SURFACE_SIDE_STYLE('',(#285347)); +#285347 = SURFACE_STYLE_FILL_AREA(#285348); +#285348 = FILL_AREA_STYLE('',(#285349)); +#285349 = FILL_AREA_STYLE_COLOUR('',#270350); +#285350 = OVER_RIDING_STYLED_ITEM('overriding color',(#285351),#73025, + #284907); +#285351 = PRESENTATION_STYLE_ASSIGNMENT((#285352)); +#285352 = SURFACE_STYLE_USAGE(.BOTH.,#285353); +#285353 = SURFACE_SIDE_STYLE('',(#285354)); +#285354 = SURFACE_STYLE_FILL_AREA(#285355); +#285355 = FILL_AREA_STYLE('',(#285356)); +#285356 = FILL_AREA_STYLE_COLOUR('',#270350); +#285357 = OVER_RIDING_STYLED_ITEM('overriding color',(#285358),#73056, + #284907); +#285358 = PRESENTATION_STYLE_ASSIGNMENT((#285359)); +#285359 = SURFACE_STYLE_USAGE(.BOTH.,#285360); +#285360 = SURFACE_SIDE_STYLE('',(#285361)); +#285361 = SURFACE_STYLE_FILL_AREA(#285362); +#285362 = FILL_AREA_STYLE('',(#285363)); +#285363 = FILL_AREA_STYLE_COLOUR('',#270350); +#285364 = OVER_RIDING_STYLED_ITEM('overriding color',(#285365),#73087, + #284907); +#285365 = PRESENTATION_STYLE_ASSIGNMENT((#285366)); +#285366 = SURFACE_STYLE_USAGE(.BOTH.,#285367); +#285367 = SURFACE_SIDE_STYLE('',(#285368)); +#285368 = SURFACE_STYLE_FILL_AREA(#285369); +#285369 = FILL_AREA_STYLE('',(#285370)); +#285370 = FILL_AREA_STYLE_COLOUR('',#270350); +#285371 = OVER_RIDING_STYLED_ITEM('overriding color',(#285372),#73111, + #284907); +#285372 = PRESENTATION_STYLE_ASSIGNMENT((#285373)); +#285373 = SURFACE_STYLE_USAGE(.BOTH.,#285374); +#285374 = SURFACE_SIDE_STYLE('',(#285375)); +#285375 = SURFACE_STYLE_FILL_AREA(#285376); +#285376 = FILL_AREA_STYLE('',(#285377)); +#285377 = FILL_AREA_STYLE_COLOUR('',#270350); +#285378 = OVER_RIDING_STYLED_ITEM('overriding color',(#285379),#73128, + #284907); +#285379 = PRESENTATION_STYLE_ASSIGNMENT((#285380)); +#285380 = SURFACE_STYLE_USAGE(.BOTH.,#285381); +#285381 = SURFACE_SIDE_STYLE('',(#285382)); +#285382 = SURFACE_STYLE_FILL_AREA(#285383); +#285383 = FILL_AREA_STYLE('',(#285384)); +#285384 = FILL_AREA_STYLE_COLOUR('',#270350); +#285385 = OVER_RIDING_STYLED_ITEM('overriding color',(#285386),#73146, + #284907); +#285386 = PRESENTATION_STYLE_ASSIGNMENT((#285387)); +#285387 = SURFACE_STYLE_USAGE(.BOTH.,#285388); +#285388 = SURFACE_SIDE_STYLE('',(#285389)); +#285389 = SURFACE_STYLE_FILL_AREA(#285390); +#285390 = FILL_AREA_STYLE('',(#285391)); +#285391 = FILL_AREA_STYLE_COLOUR('',#270350); +#285392 = OVER_RIDING_STYLED_ITEM('overriding color',(#285393),#73193, + #284907); +#285393 = PRESENTATION_STYLE_ASSIGNMENT((#285394)); +#285394 = SURFACE_STYLE_USAGE(.BOTH.,#285395); +#285395 = SURFACE_SIDE_STYLE('',(#285396)); +#285396 = SURFACE_STYLE_FILL_AREA(#285397); +#285397 = FILL_AREA_STYLE('',(#285398)); +#285398 = FILL_AREA_STYLE_COLOUR('',#270350); +#285399 = OVER_RIDING_STYLED_ITEM('overriding color',(#285400),#73224, + #284907); +#285400 = PRESENTATION_STYLE_ASSIGNMENT((#285401)); +#285401 = SURFACE_STYLE_USAGE(.BOTH.,#285402); +#285402 = SURFACE_SIDE_STYLE('',(#285403)); +#285403 = SURFACE_STYLE_FILL_AREA(#285404); +#285404 = FILL_AREA_STYLE('',(#285405)); +#285405 = FILL_AREA_STYLE_COLOUR('',#270350); +#285406 = OVER_RIDING_STYLED_ITEM('overriding color',(#285407),#73248, + #284907); +#285407 = PRESENTATION_STYLE_ASSIGNMENT((#285408)); +#285408 = SURFACE_STYLE_USAGE(.BOTH.,#285409); +#285409 = SURFACE_SIDE_STYLE('',(#285410)); +#285410 = SURFACE_STYLE_FILL_AREA(#285411); +#285411 = FILL_AREA_STYLE('',(#285412)); +#285412 = FILL_AREA_STYLE_COLOUR('',#270350); +#285413 = OVER_RIDING_STYLED_ITEM('overriding color',(#285414),#73272, + #284907); +#285414 = PRESENTATION_STYLE_ASSIGNMENT((#285415)); +#285415 = SURFACE_STYLE_USAGE(.BOTH.,#285416); +#285416 = SURFACE_SIDE_STYLE('',(#285417)); +#285417 = SURFACE_STYLE_FILL_AREA(#285418); +#285418 = FILL_AREA_STYLE('',(#285419)); +#285419 = FILL_AREA_STYLE_COLOUR('',#270350); +#285420 = OVER_RIDING_STYLED_ITEM('overriding color',(#285421),#73289, + #284907); +#285421 = PRESENTATION_STYLE_ASSIGNMENT((#285422)); +#285422 = SURFACE_STYLE_USAGE(.BOTH.,#285423); +#285423 = SURFACE_SIDE_STYLE('',(#285424)); +#285424 = SURFACE_STYLE_FILL_AREA(#285425); +#285425 = FILL_AREA_STYLE('',(#285426)); +#285426 = FILL_AREA_STYLE_COLOUR('',#270350); +#285427 = OVER_RIDING_STYLED_ITEM('overriding color',(#285428),#73301, + #284907); +#285428 = PRESENTATION_STYLE_ASSIGNMENT((#285429)); +#285429 = SURFACE_STYLE_USAGE(.BOTH.,#285430); +#285430 = SURFACE_SIDE_STYLE('',(#285431)); +#285431 = SURFACE_STYLE_FILL_AREA(#285432); +#285432 = FILL_AREA_STYLE('',(#285433)); +#285433 = FILL_AREA_STYLE_COLOUR('',#270350); +#285434 = OVER_RIDING_STYLED_ITEM('overriding color',(#285435),#73325, + #284907); +#285435 = PRESENTATION_STYLE_ASSIGNMENT((#285436)); +#285436 = SURFACE_STYLE_USAGE(.BOTH.,#285437); +#285437 = SURFACE_SIDE_STYLE('',(#285438)); +#285438 = SURFACE_STYLE_FILL_AREA(#285439); +#285439 = FILL_AREA_STYLE('',(#285440)); +#285440 = FILL_AREA_STYLE_COLOUR('',#270350); +#285441 = OVER_RIDING_STYLED_ITEM('overriding color',(#285442),#73364, + #284907); +#285442 = PRESENTATION_STYLE_ASSIGNMENT((#285443)); +#285443 = SURFACE_STYLE_USAGE(.BOTH.,#285444); +#285444 = SURFACE_SIDE_STYLE('',(#285445)); +#285445 = SURFACE_STYLE_FILL_AREA(#285446); +#285446 = FILL_AREA_STYLE('',(#285447)); +#285447 = FILL_AREA_STYLE_COLOUR('',#270350); +#285448 = OVER_RIDING_STYLED_ITEM('overriding color',(#285449),#73395, + #284907); +#285449 = PRESENTATION_STYLE_ASSIGNMENT((#285450)); +#285450 = SURFACE_STYLE_USAGE(.BOTH.,#285451); +#285451 = SURFACE_SIDE_STYLE('',(#285452)); +#285452 = SURFACE_STYLE_FILL_AREA(#285453); +#285453 = FILL_AREA_STYLE('',(#285454)); +#285454 = FILL_AREA_STYLE_COLOUR('',#270350); +#285455 = OVER_RIDING_STYLED_ITEM('overriding color',(#285456),#73432, + #284907); +#285456 = PRESENTATION_STYLE_ASSIGNMENT((#285457)); +#285457 = SURFACE_STYLE_USAGE(.BOTH.,#285458); +#285458 = SURFACE_SIDE_STYLE('',(#285459)); +#285459 = SURFACE_STYLE_FILL_AREA(#285460); +#285460 = FILL_AREA_STYLE('',(#285461)); +#285461 = FILL_AREA_STYLE_COLOUR('',#270350); +#285462 = OVER_RIDING_STYLED_ITEM('overriding color',(#285463),#73449, + #284907); +#285463 = PRESENTATION_STYLE_ASSIGNMENT((#285464)); +#285464 = SURFACE_STYLE_USAGE(.BOTH.,#285465); +#285465 = SURFACE_SIDE_STYLE('',(#285466)); +#285466 = SURFACE_STYLE_FILL_AREA(#285467); +#285467 = FILL_AREA_STYLE('',(#285468)); +#285468 = FILL_AREA_STYLE_COLOUR('',#270350); +#285469 = OVER_RIDING_STYLED_ITEM('overriding color',(#285470),#73461, + #284907); +#285470 = PRESENTATION_STYLE_ASSIGNMENT((#285471)); +#285471 = SURFACE_STYLE_USAGE(.BOTH.,#285472); +#285472 = SURFACE_SIDE_STYLE('',(#285473)); +#285473 = SURFACE_STYLE_FILL_AREA(#285474); +#285474 = FILL_AREA_STYLE('',(#285475)); +#285475 = FILL_AREA_STYLE_COLOUR('',#270350); +#285476 = OVER_RIDING_STYLED_ITEM('overriding color',(#285477),#73485, + #284907); +#285477 = PRESENTATION_STYLE_ASSIGNMENT((#285478)); +#285478 = SURFACE_STYLE_USAGE(.BOTH.,#285479); +#285479 = SURFACE_SIDE_STYLE('',(#285480)); +#285480 = SURFACE_STYLE_FILL_AREA(#285481); +#285481 = FILL_AREA_STYLE('',(#285482)); +#285482 = FILL_AREA_STYLE_COLOUR('',#270350); +#285483 = OVER_RIDING_STYLED_ITEM('overriding color',(#285484),#73524, + #284907); +#285484 = PRESENTATION_STYLE_ASSIGNMENT((#285485)); +#285485 = SURFACE_STYLE_USAGE(.BOTH.,#285486); +#285486 = SURFACE_SIDE_STYLE('',(#285487)); +#285487 = SURFACE_STYLE_FILL_AREA(#285488); +#285488 = FILL_AREA_STYLE('',(#285489)); +#285489 = FILL_AREA_STYLE_COLOUR('',#270350); +#285490 = OVER_RIDING_STYLED_ITEM('overriding color',(#285491),#73555, + #284907); +#285491 = PRESENTATION_STYLE_ASSIGNMENT((#285492)); +#285492 = SURFACE_STYLE_USAGE(.BOTH.,#285493); +#285493 = SURFACE_SIDE_STYLE('',(#285494)); +#285494 = SURFACE_STYLE_FILL_AREA(#285495); +#285495 = FILL_AREA_STYLE('',(#285496)); +#285496 = FILL_AREA_STYLE_COLOUR('',#270350); +#285497 = OVER_RIDING_STYLED_ITEM('overriding color',(#285498),#73602, + #284907); +#285498 = PRESENTATION_STYLE_ASSIGNMENT((#285499)); +#285499 = SURFACE_STYLE_USAGE(.BOTH.,#285500); +#285500 = SURFACE_SIDE_STYLE('',(#285501)); +#285501 = SURFACE_STYLE_FILL_AREA(#285502); +#285502 = FILL_AREA_STYLE('',(#285503)); +#285503 = FILL_AREA_STYLE_COLOUR('',#270350); +#285504 = OVER_RIDING_STYLED_ITEM('overriding color',(#285505),#73641, + #284907); +#285505 = PRESENTATION_STYLE_ASSIGNMENT((#285506)); +#285506 = SURFACE_STYLE_USAGE(.BOTH.,#285507); +#285507 = SURFACE_SIDE_STYLE('',(#285508)); +#285508 = SURFACE_STYLE_FILL_AREA(#285509); +#285509 = FILL_AREA_STYLE('',(#285510)); +#285510 = FILL_AREA_STYLE_COLOUR('',#270350); +#285511 = OVER_RIDING_STYLED_ITEM('overriding color',(#285512),#73688, + #284907); +#285512 = PRESENTATION_STYLE_ASSIGNMENT((#285513)); +#285513 = SURFACE_STYLE_USAGE(.BOTH.,#285514); +#285514 = SURFACE_SIDE_STYLE('',(#285515)); +#285515 = SURFACE_STYLE_FILL_AREA(#285516); +#285516 = FILL_AREA_STYLE('',(#285517)); +#285517 = FILL_AREA_STYLE_COLOUR('',#270350); +#285518 = OVER_RIDING_STYLED_ITEM('overriding color',(#285519),#73719, + #284907); +#285519 = PRESENTATION_STYLE_ASSIGNMENT((#285520)); +#285520 = SURFACE_STYLE_USAGE(.BOTH.,#285521); +#285521 = SURFACE_SIDE_STYLE('',(#285522)); +#285522 = SURFACE_STYLE_FILL_AREA(#285523); +#285523 = FILL_AREA_STYLE('',(#285524)); +#285524 = FILL_AREA_STYLE_COLOUR('',#270350); +#285525 = OVER_RIDING_STYLED_ITEM('overriding color',(#285526),#73766, + #284907); +#285526 = PRESENTATION_STYLE_ASSIGNMENT((#285527)); +#285527 = SURFACE_STYLE_USAGE(.BOTH.,#285528); +#285528 = SURFACE_SIDE_STYLE('',(#285529)); +#285529 = SURFACE_STYLE_FILL_AREA(#285530); +#285530 = FILL_AREA_STYLE('',(#285531)); +#285531 = FILL_AREA_STYLE_COLOUR('',#270350); +#285532 = OVER_RIDING_STYLED_ITEM('overriding color',(#285533),#73797, + #284907); +#285533 = PRESENTATION_STYLE_ASSIGNMENT((#285534)); +#285534 = SURFACE_STYLE_USAGE(.BOTH.,#285535); +#285535 = SURFACE_SIDE_STYLE('',(#285536)); +#285536 = SURFACE_STYLE_FILL_AREA(#285537); +#285537 = FILL_AREA_STYLE('',(#285538)); +#285538 = FILL_AREA_STYLE_COLOUR('',#270350); +#285539 = OVER_RIDING_STYLED_ITEM('overriding color',(#285540),#73844, + #284907); +#285540 = PRESENTATION_STYLE_ASSIGNMENT((#285541)); +#285541 = SURFACE_STYLE_USAGE(.BOTH.,#285542); +#285542 = SURFACE_SIDE_STYLE('',(#285543)); +#285543 = SURFACE_STYLE_FILL_AREA(#285544); +#285544 = FILL_AREA_STYLE('',(#285545)); +#285545 = FILL_AREA_STYLE_COLOUR('',#270350); +#285546 = OVER_RIDING_STYLED_ITEM('overriding color',(#285547),#73875, + #284907); +#285547 = PRESENTATION_STYLE_ASSIGNMENT((#285548)); +#285548 = SURFACE_STYLE_USAGE(.BOTH.,#285549); +#285549 = SURFACE_SIDE_STYLE('',(#285550)); +#285550 = SURFACE_STYLE_FILL_AREA(#285551); +#285551 = FILL_AREA_STYLE('',(#285552)); +#285552 = FILL_AREA_STYLE_COLOUR('',#270350); +#285553 = OVER_RIDING_STYLED_ITEM('overriding color',(#285554),#73922, + #284907); +#285554 = PRESENTATION_STYLE_ASSIGNMENT((#285555)); +#285555 = SURFACE_STYLE_USAGE(.BOTH.,#285556); +#285556 = SURFACE_SIDE_STYLE('',(#285557)); +#285557 = SURFACE_STYLE_FILL_AREA(#285558); +#285558 = FILL_AREA_STYLE('',(#285559)); +#285559 = FILL_AREA_STYLE_COLOUR('',#270350); +#285560 = OVER_RIDING_STYLED_ITEM('overriding color',(#285561),#73961, + #284907); +#285561 = PRESENTATION_STYLE_ASSIGNMENT((#285562)); +#285562 = SURFACE_STYLE_USAGE(.BOTH.,#285563); +#285563 = SURFACE_SIDE_STYLE('',(#285564)); +#285564 = SURFACE_STYLE_FILL_AREA(#285565); +#285565 = FILL_AREA_STYLE('',(#285566)); +#285566 = FILL_AREA_STYLE_COLOUR('',#270350); +#285567 = OVER_RIDING_STYLED_ITEM('overriding color',(#285568),#74008, + #284907); +#285568 = PRESENTATION_STYLE_ASSIGNMENT((#285569)); +#285569 = SURFACE_STYLE_USAGE(.BOTH.,#285570); +#285570 = SURFACE_SIDE_STYLE('',(#285571)); +#285571 = SURFACE_STYLE_FILL_AREA(#285572); +#285572 = FILL_AREA_STYLE('',(#285573)); +#285573 = FILL_AREA_STYLE_COLOUR('',#270350); +#285574 = OVER_RIDING_STYLED_ITEM('overriding color',(#285575),#74039, + #284907); +#285575 = PRESENTATION_STYLE_ASSIGNMENT((#285576)); +#285576 = SURFACE_STYLE_USAGE(.BOTH.,#285577); +#285577 = SURFACE_SIDE_STYLE('',(#285578)); +#285578 = SURFACE_STYLE_FILL_AREA(#285579); +#285579 = FILL_AREA_STYLE('',(#285580)); +#285580 = FILL_AREA_STYLE_COLOUR('',#270350); +#285581 = OVER_RIDING_STYLED_ITEM('overriding color',(#285582),#74076, + #284907); +#285582 = PRESENTATION_STYLE_ASSIGNMENT((#285583)); +#285583 = SURFACE_STYLE_USAGE(.BOTH.,#285584); +#285584 = SURFACE_SIDE_STYLE('',(#285585)); +#285585 = SURFACE_STYLE_FILL_AREA(#285586); +#285586 = FILL_AREA_STYLE('',(#285587)); +#285587 = FILL_AREA_STYLE_COLOUR('',#270350); +#285588 = OVER_RIDING_STYLED_ITEM('overriding color',(#285589),#74093, + #284907); +#285589 = PRESENTATION_STYLE_ASSIGNMENT((#285590)); +#285590 = SURFACE_STYLE_USAGE(.BOTH.,#285591); +#285591 = SURFACE_SIDE_STYLE('',(#285592)); +#285592 = SURFACE_STYLE_FILL_AREA(#285593); +#285593 = FILL_AREA_STYLE('',(#285594)); +#285594 = FILL_AREA_STYLE_COLOUR('',#270350); +#285595 = OVER_RIDING_STYLED_ITEM('overriding color',(#285596),#74110, + #284907); +#285596 = PRESENTATION_STYLE_ASSIGNMENT((#285597)); +#285597 = SURFACE_STYLE_USAGE(.BOTH.,#285598); +#285598 = SURFACE_SIDE_STYLE('',(#285599)); +#285599 = SURFACE_STYLE_FILL_AREA(#285600); +#285600 = FILL_AREA_STYLE('',(#285601)); +#285601 = FILL_AREA_STYLE_COLOUR('',#270350); +#285602 = OVER_RIDING_STYLED_ITEM('overriding color',(#285603),#74127, + #284907); +#285603 = PRESENTATION_STYLE_ASSIGNMENT((#285604)); +#285604 = SURFACE_STYLE_USAGE(.BOTH.,#285605); +#285605 = SURFACE_SIDE_STYLE('',(#285606)); +#285606 = SURFACE_STYLE_FILL_AREA(#285607); +#285607 = FILL_AREA_STYLE('',(#285608)); +#285608 = FILL_AREA_STYLE_COLOUR('',#270350); +#285609 = OVER_RIDING_STYLED_ITEM('overriding color',(#285610),#74144, + #284907); +#285610 = PRESENTATION_STYLE_ASSIGNMENT((#285611)); +#285611 = SURFACE_STYLE_USAGE(.BOTH.,#285612); +#285612 = SURFACE_SIDE_STYLE('',(#285613)); +#285613 = SURFACE_STYLE_FILL_AREA(#285614); +#285614 = FILL_AREA_STYLE('',(#285615)); +#285615 = FILL_AREA_STYLE_COLOUR('',#270350); +#285616 = OVER_RIDING_STYLED_ITEM('overriding color',(#285617),#74161, + #284907); +#285617 = PRESENTATION_STYLE_ASSIGNMENT((#285618)); +#285618 = SURFACE_STYLE_USAGE(.BOTH.,#285619); +#285619 = SURFACE_SIDE_STYLE('',(#285620)); +#285620 = SURFACE_STYLE_FILL_AREA(#285621); +#285621 = FILL_AREA_STYLE('',(#285622)); +#285622 = FILL_AREA_STYLE_COLOUR('',#270350); +#285623 = OVER_RIDING_STYLED_ITEM('overriding color',(#285624),#74178, + #284907); +#285624 = PRESENTATION_STYLE_ASSIGNMENT((#285625)); +#285625 = SURFACE_STYLE_USAGE(.BOTH.,#285626); +#285626 = SURFACE_SIDE_STYLE('',(#285627)); +#285627 = SURFACE_STYLE_FILL_AREA(#285628); +#285628 = FILL_AREA_STYLE('',(#285629)); +#285629 = FILL_AREA_STYLE_COLOUR('',#270350); +#285630 = OVER_RIDING_STYLED_ITEM('overriding color',(#285631),#74195, + #284907); +#285631 = PRESENTATION_STYLE_ASSIGNMENT((#285632)); +#285632 = SURFACE_STYLE_USAGE(.BOTH.,#285633); +#285633 = SURFACE_SIDE_STYLE('',(#285634)); +#285634 = SURFACE_STYLE_FILL_AREA(#285635); +#285635 = FILL_AREA_STYLE('',(#285636)); +#285636 = FILL_AREA_STYLE_COLOUR('',#270350); +#285637 = OVER_RIDING_STYLED_ITEM('overriding color',(#285638),#74230, + #284907); +#285638 = PRESENTATION_STYLE_ASSIGNMENT((#285639)); +#285639 = SURFACE_STYLE_USAGE(.BOTH.,#285640); +#285640 = SURFACE_SIDE_STYLE('',(#285641)); +#285641 = SURFACE_STYLE_FILL_AREA(#285642); +#285642 = FILL_AREA_STYLE('',(#285643)); +#285643 = FILL_AREA_STYLE_COLOUR('',#270350); +#285644 = OVER_RIDING_STYLED_ITEM('overriding color',(#285645),#74247, + #284907); +#285645 = PRESENTATION_STYLE_ASSIGNMENT((#285646)); +#285646 = SURFACE_STYLE_USAGE(.BOTH.,#285647); +#285647 = SURFACE_SIDE_STYLE('',(#285648)); +#285648 = SURFACE_STYLE_FILL_AREA(#285649); +#285649 = FILL_AREA_STYLE('',(#285650)); +#285650 = FILL_AREA_STYLE_COLOUR('',#270350); +#285651 = OVER_RIDING_STYLED_ITEM('overriding color',(#285652),#74264, + #284907); +#285652 = PRESENTATION_STYLE_ASSIGNMENT((#285653)); +#285653 = SURFACE_STYLE_USAGE(.BOTH.,#285654); +#285654 = SURFACE_SIDE_STYLE('',(#285655)); +#285655 = SURFACE_STYLE_FILL_AREA(#285656); +#285656 = FILL_AREA_STYLE('',(#285657)); +#285657 = FILL_AREA_STYLE_COLOUR('',#270350); +#285658 = OVER_RIDING_STYLED_ITEM('overriding color',(#285659),#74282, + #284907); +#285659 = PRESENTATION_STYLE_ASSIGNMENT((#285660)); +#285660 = SURFACE_STYLE_USAGE(.BOTH.,#285661); +#285661 = SURFACE_SIDE_STYLE('',(#285662)); +#285662 = SURFACE_STYLE_FILL_AREA(#285663); +#285663 = FILL_AREA_STYLE('',(#285664)); +#285664 = FILL_AREA_STYLE_COLOUR('',#270350); +#285665 = OVER_RIDING_STYLED_ITEM('overriding color',(#285666),#74300, + #284907); +#285666 = PRESENTATION_STYLE_ASSIGNMENT((#285667)); +#285667 = SURFACE_STYLE_USAGE(.BOTH.,#285668); +#285668 = SURFACE_SIDE_STYLE('',(#285669)); +#285669 = SURFACE_STYLE_FILL_AREA(#285670); +#285670 = FILL_AREA_STYLE('',(#285671)); +#285671 = FILL_AREA_STYLE_COLOUR('',#270350); +#285672 = OVER_RIDING_STYLED_ITEM('overriding color',(#285673),#74317, + #284907); +#285673 = PRESENTATION_STYLE_ASSIGNMENT((#285674)); +#285674 = SURFACE_STYLE_USAGE(.BOTH.,#285675); +#285675 = SURFACE_SIDE_STYLE('',(#285676)); +#285676 = SURFACE_STYLE_FILL_AREA(#285677); +#285677 = FILL_AREA_STYLE('',(#285678)); +#285678 = FILL_AREA_STYLE_COLOUR('',#270350); +#285679 = OVER_RIDING_STYLED_ITEM('overriding color',(#285680),#74335, + #284907); +#285680 = PRESENTATION_STYLE_ASSIGNMENT((#285681)); +#285681 = SURFACE_STYLE_USAGE(.BOTH.,#285682); +#285682 = SURFACE_SIDE_STYLE('',(#285683)); +#285683 = SURFACE_STYLE_FILL_AREA(#285684); +#285684 = FILL_AREA_STYLE('',(#285685)); +#285685 = FILL_AREA_STYLE_COLOUR('',#270350); +#285686 = OVER_RIDING_STYLED_ITEM('overriding color',(#285687),#74348, + #284907); +#285687 = PRESENTATION_STYLE_ASSIGNMENT((#285688)); +#285688 = SURFACE_STYLE_USAGE(.BOTH.,#285689); +#285689 = SURFACE_SIDE_STYLE('',(#285690)); +#285690 = SURFACE_STYLE_FILL_AREA(#285691); +#285691 = FILL_AREA_STYLE('',(#285692)); +#285692 = FILL_AREA_STYLE_COLOUR('',#270350); +#285693 = OVER_RIDING_STYLED_ITEM('overriding color',(#285694),#74372, + #284907); +#285694 = PRESENTATION_STYLE_ASSIGNMENT((#285695)); +#285695 = SURFACE_STYLE_USAGE(.BOTH.,#285696); +#285696 = SURFACE_SIDE_STYLE('',(#285697)); +#285697 = SURFACE_STYLE_FILL_AREA(#285698); +#285698 = FILL_AREA_STYLE('',(#285699)); +#285699 = FILL_AREA_STYLE_COLOUR('',#270350); +#285700 = OVER_RIDING_STYLED_ITEM('overriding color',(#285701),#74411, + #284907); +#285701 = PRESENTATION_STYLE_ASSIGNMENT((#285702)); +#285702 = SURFACE_STYLE_USAGE(.BOTH.,#285703); +#285703 = SURFACE_SIDE_STYLE('',(#285704)); +#285704 = SURFACE_STYLE_FILL_AREA(#285705); +#285705 = FILL_AREA_STYLE('',(#285706)); +#285706 = FILL_AREA_STYLE_COLOUR('',#270350); +#285707 = OVER_RIDING_STYLED_ITEM('overriding color',(#285708),#74442, + #284907); +#285708 = PRESENTATION_STYLE_ASSIGNMENT((#285709)); +#285709 = SURFACE_STYLE_USAGE(.BOTH.,#285710); +#285710 = SURFACE_SIDE_STYLE('',(#285711)); +#285711 = SURFACE_STYLE_FILL_AREA(#285712); +#285712 = FILL_AREA_STYLE('',(#285713)); +#285713 = FILL_AREA_STYLE_COLOUR('',#270350); +#285714 = OVER_RIDING_STYLED_ITEM('overriding color',(#285715),#74479, + #284907); +#285715 = PRESENTATION_STYLE_ASSIGNMENT((#285716)); +#285716 = SURFACE_STYLE_USAGE(.BOTH.,#285717); +#285717 = SURFACE_SIDE_STYLE('',(#285718)); +#285718 = SURFACE_STYLE_FILL_AREA(#285719); +#285719 = FILL_AREA_STYLE('',(#285720)); +#285720 = FILL_AREA_STYLE_COLOUR('',#270350); +#285721 = OVER_RIDING_STYLED_ITEM('overriding color',(#285722),#74496, + #284907); +#285722 = PRESENTATION_STYLE_ASSIGNMENT((#285723)); +#285723 = SURFACE_STYLE_USAGE(.BOTH.,#285724); +#285724 = SURFACE_SIDE_STYLE('',(#285725)); +#285725 = SURFACE_STYLE_FILL_AREA(#285726); +#285726 = FILL_AREA_STYLE('',(#285727)); +#285727 = FILL_AREA_STYLE_COLOUR('',#270350); +#285728 = OVER_RIDING_STYLED_ITEM('overriding color',(#285729),#74508, + #284907); +#285729 = PRESENTATION_STYLE_ASSIGNMENT((#285730)); +#285730 = SURFACE_STYLE_USAGE(.BOTH.,#285731); +#285731 = SURFACE_SIDE_STYLE('',(#285732)); +#285732 = SURFACE_STYLE_FILL_AREA(#285733); +#285733 = FILL_AREA_STYLE('',(#285734)); +#285734 = FILL_AREA_STYLE_COLOUR('',#270350); +#285735 = OVER_RIDING_STYLED_ITEM('overriding color',(#285736),#74532, + #284907); +#285736 = PRESENTATION_STYLE_ASSIGNMENT((#285737)); +#285737 = SURFACE_STYLE_USAGE(.BOTH.,#285738); +#285738 = SURFACE_SIDE_STYLE('',(#285739)); +#285739 = SURFACE_STYLE_FILL_AREA(#285740); +#285740 = FILL_AREA_STYLE('',(#285741)); +#285741 = FILL_AREA_STYLE_COLOUR('',#270350); +#285742 = OVER_RIDING_STYLED_ITEM('overriding color',(#285743),#74571, + #284907); +#285743 = PRESENTATION_STYLE_ASSIGNMENT((#285744)); +#285744 = SURFACE_STYLE_USAGE(.BOTH.,#285745); +#285745 = SURFACE_SIDE_STYLE('',(#285746)); +#285746 = SURFACE_STYLE_FILL_AREA(#285747); +#285747 = FILL_AREA_STYLE('',(#285748)); +#285748 = FILL_AREA_STYLE_COLOUR('',#270350); +#285749 = OVER_RIDING_STYLED_ITEM('overriding color',(#285750),#74602, + #284907); +#285750 = PRESENTATION_STYLE_ASSIGNMENT((#285751)); +#285751 = SURFACE_STYLE_USAGE(.BOTH.,#285752); +#285752 = SURFACE_SIDE_STYLE('',(#285753)); +#285753 = SURFACE_STYLE_FILL_AREA(#285754); +#285754 = FILL_AREA_STYLE('',(#285755)); +#285755 = FILL_AREA_STYLE_COLOUR('',#270350); +#285756 = OVER_RIDING_STYLED_ITEM('overriding color',(#285757),#74639, + #284907); +#285757 = PRESENTATION_STYLE_ASSIGNMENT((#285758)); +#285758 = SURFACE_STYLE_USAGE(.BOTH.,#285759); +#285759 = SURFACE_SIDE_STYLE('',(#285760)); +#285760 = SURFACE_STYLE_FILL_AREA(#285761); +#285761 = FILL_AREA_STYLE('',(#285762)); +#285762 = FILL_AREA_STYLE_COLOUR('',#270350); +#285763 = OVER_RIDING_STYLED_ITEM('overriding color',(#285764),#74656, + #284907); +#285764 = PRESENTATION_STYLE_ASSIGNMENT((#285765)); +#285765 = SURFACE_STYLE_USAGE(.BOTH.,#285766); +#285766 = SURFACE_SIDE_STYLE('',(#285767)); +#285767 = SURFACE_STYLE_FILL_AREA(#285768); +#285768 = FILL_AREA_STYLE('',(#285769)); +#285769 = FILL_AREA_STYLE_COLOUR('',#270350); +#285770 = OVER_RIDING_STYLED_ITEM('overriding color',(#285771),#74668, + #284907); +#285771 = PRESENTATION_STYLE_ASSIGNMENT((#285772)); +#285772 = SURFACE_STYLE_USAGE(.BOTH.,#285773); +#285773 = SURFACE_SIDE_STYLE('',(#285774)); +#285774 = SURFACE_STYLE_FILL_AREA(#285775); +#285775 = FILL_AREA_STYLE('',(#285776)); +#285776 = FILL_AREA_STYLE_COLOUR('',#270350); +#285777 = OVER_RIDING_STYLED_ITEM('overriding color',(#285778),#74685, + #284907); +#285778 = PRESENTATION_STYLE_ASSIGNMENT((#285779)); +#285779 = SURFACE_STYLE_USAGE(.BOTH.,#285780); +#285780 = SURFACE_SIDE_STYLE('',(#285781)); +#285781 = SURFACE_STYLE_FILL_AREA(#285782); +#285782 = FILL_AREA_STYLE('',(#285783)); +#285783 = FILL_AREA_STYLE_COLOUR('',#270350); +#285784 = OVER_RIDING_STYLED_ITEM('overriding color',(#285785),#74699, + #284907); +#285785 = PRESENTATION_STYLE_ASSIGNMENT((#285786)); +#285786 = SURFACE_STYLE_USAGE(.BOTH.,#285787); +#285787 = SURFACE_SIDE_STYLE('',(#285788)); +#285788 = SURFACE_STYLE_FILL_AREA(#285789); +#285789 = FILL_AREA_STYLE('',(#285790)); +#285790 = FILL_AREA_STYLE_COLOUR('',#270350); +#285791 = OVER_RIDING_STYLED_ITEM('overriding color',(#285792),#74711, + #284907); +#285792 = PRESENTATION_STYLE_ASSIGNMENT((#285793)); +#285793 = SURFACE_STYLE_USAGE(.BOTH.,#285794); +#285794 = SURFACE_SIDE_STYLE('',(#285795)); +#285795 = SURFACE_STYLE_FILL_AREA(#285796); +#285796 = FILL_AREA_STYLE('',(#285797)); +#285797 = FILL_AREA_STYLE_COLOUR('',#270350); +#285798 = OVER_RIDING_STYLED_ITEM('overriding color',(#285799),#74736, + #284907); +#285799 = PRESENTATION_STYLE_ASSIGNMENT((#285800)); +#285800 = SURFACE_STYLE_USAGE(.BOTH.,#285801); +#285801 = SURFACE_SIDE_STYLE('',(#285802)); +#285802 = SURFACE_STYLE_FILL_AREA(#285803); +#285803 = FILL_AREA_STYLE('',(#285804)); +#285804 = FILL_AREA_STYLE_COLOUR('',#270350); +#285805 = OVER_RIDING_STYLED_ITEM('overriding color',(#285806),#74748, + #284907); +#285806 = PRESENTATION_STYLE_ASSIGNMENT((#285807)); +#285807 = SURFACE_STYLE_USAGE(.BOTH.,#285808); +#285808 = SURFACE_SIDE_STYLE('',(#285809)); +#285809 = SURFACE_STYLE_FILL_AREA(#285810); +#285810 = FILL_AREA_STYLE('',(#285811)); +#285811 = FILL_AREA_STYLE_COLOUR('',#270350); +#285812 = OVER_RIDING_STYLED_ITEM('overriding color',(#285813),#74768, + #284907); +#285813 = PRESENTATION_STYLE_ASSIGNMENT((#285814)); +#285814 = SURFACE_STYLE_USAGE(.BOTH.,#285815); +#285815 = SURFACE_SIDE_STYLE('',(#285816)); +#285816 = SURFACE_STYLE_FILL_AREA(#285817); +#285817 = FILL_AREA_STYLE('',(#285818)); +#285818 = FILL_AREA_STYLE_COLOUR('',#270350); +#285819 = OVER_RIDING_STYLED_ITEM('overriding color',(#285820),#74814, + #284907); +#285820 = PRESENTATION_STYLE_ASSIGNMENT((#285821)); +#285821 = SURFACE_STYLE_USAGE(.BOTH.,#285822); +#285822 = SURFACE_SIDE_STYLE('',(#285823)); +#285823 = SURFACE_STYLE_FILL_AREA(#285824); +#285824 = FILL_AREA_STYLE('',(#285825)); +#285825 = FILL_AREA_STYLE_COLOUR('',#270350); +#285826 = OVER_RIDING_STYLED_ITEM('overriding color',(#285827),#74845, + #284907); +#285827 = PRESENTATION_STYLE_ASSIGNMENT((#285828)); +#285828 = SURFACE_STYLE_USAGE(.BOTH.,#285829); +#285829 = SURFACE_SIDE_STYLE('',(#285830)); +#285830 = SURFACE_STYLE_FILL_AREA(#285831); +#285831 = FILL_AREA_STYLE('',(#285832)); +#285832 = FILL_AREA_STYLE_COLOUR('',#270350); +#285833 = OVER_RIDING_STYLED_ITEM('overriding color',(#285834),#74876, + #284907); +#285834 = PRESENTATION_STYLE_ASSIGNMENT((#285835)); +#285835 = SURFACE_STYLE_USAGE(.BOTH.,#285836); +#285836 = SURFACE_SIDE_STYLE('',(#285837)); +#285837 = SURFACE_STYLE_FILL_AREA(#285838); +#285838 = FILL_AREA_STYLE('',(#285839)); +#285839 = FILL_AREA_STYLE_COLOUR('',#270350); +#285840 = OVER_RIDING_STYLED_ITEM('overriding color',(#285841),#74907, + #284907); +#285841 = PRESENTATION_STYLE_ASSIGNMENT((#285842)); +#285842 = SURFACE_STYLE_USAGE(.BOTH.,#285843); +#285843 = SURFACE_SIDE_STYLE('',(#285844)); +#285844 = SURFACE_STYLE_FILL_AREA(#285845); +#285845 = FILL_AREA_STYLE('',(#285846)); +#285846 = FILL_AREA_STYLE_COLOUR('',#270350); +#285847 = OVER_RIDING_STYLED_ITEM('overriding color',(#285848),#74931, + #284907); +#285848 = PRESENTATION_STYLE_ASSIGNMENT((#285849)); +#285849 = SURFACE_STYLE_USAGE(.BOTH.,#285850); +#285850 = SURFACE_SIDE_STYLE('',(#285851)); +#285851 = SURFACE_STYLE_FILL_AREA(#285852); +#285852 = FILL_AREA_STYLE('',(#285853)); +#285853 = FILL_AREA_STYLE_COLOUR('',#270350); +#285854 = OVER_RIDING_STYLED_ITEM('overriding color',(#285855),#74962, + #284907); +#285855 = PRESENTATION_STYLE_ASSIGNMENT((#285856)); +#285856 = SURFACE_STYLE_USAGE(.BOTH.,#285857); +#285857 = SURFACE_SIDE_STYLE('',(#285858)); +#285858 = SURFACE_STYLE_FILL_AREA(#285859); +#285859 = FILL_AREA_STYLE('',(#285860)); +#285860 = FILL_AREA_STYLE_COLOUR('',#270350); +#285861 = OVER_RIDING_STYLED_ITEM('overriding color',(#285862),#74993, + #284907); +#285862 = PRESENTATION_STYLE_ASSIGNMENT((#285863)); +#285863 = SURFACE_STYLE_USAGE(.BOTH.,#285864); +#285864 = SURFACE_SIDE_STYLE('',(#285865)); +#285865 = SURFACE_STYLE_FILL_AREA(#285866); +#285866 = FILL_AREA_STYLE('',(#285867)); +#285867 = FILL_AREA_STYLE_COLOUR('',#270350); +#285868 = OVER_RIDING_STYLED_ITEM('overriding color',(#285869),#75010, + #284907); +#285869 = PRESENTATION_STYLE_ASSIGNMENT((#285870)); +#285870 = SURFACE_STYLE_USAGE(.BOTH.,#285871); +#285871 = SURFACE_SIDE_STYLE('',(#285872)); +#285872 = SURFACE_STYLE_FILL_AREA(#285873); +#285873 = FILL_AREA_STYLE('',(#285874)); +#285874 = FILL_AREA_STYLE_COLOUR('',#270350); +#285875 = OVER_RIDING_STYLED_ITEM('overriding color',(#285876),#75027, + #284907); +#285876 = PRESENTATION_STYLE_ASSIGNMENT((#285877)); +#285877 = SURFACE_STYLE_USAGE(.BOTH.,#285878); +#285878 = SURFACE_SIDE_STYLE('',(#285879)); +#285879 = SURFACE_STYLE_FILL_AREA(#285880); +#285880 = FILL_AREA_STYLE('',(#285881)); +#285881 = FILL_AREA_STYLE_COLOUR('',#270350); +#285882 = OVER_RIDING_STYLED_ITEM('overriding color',(#285883),#75040, + #284907); +#285883 = PRESENTATION_STYLE_ASSIGNMENT((#285884)); +#285884 = SURFACE_STYLE_USAGE(.BOTH.,#285885); +#285885 = SURFACE_SIDE_STYLE('',(#285886)); +#285886 = SURFACE_STYLE_FILL_AREA(#285887); +#285887 = FILL_AREA_STYLE('',(#285888)); +#285888 = FILL_AREA_STYLE_COLOUR('',#270350); +#285889 = OVER_RIDING_STYLED_ITEM('overriding color',(#285890),#75057, + #284907); +#285890 = PRESENTATION_STYLE_ASSIGNMENT((#285891)); +#285891 = SURFACE_STYLE_USAGE(.BOTH.,#285892); +#285892 = SURFACE_SIDE_STYLE('',(#285893)); +#285893 = SURFACE_STYLE_FILL_AREA(#285894); +#285894 = FILL_AREA_STYLE('',(#285895)); +#285895 = FILL_AREA_STYLE_COLOUR('',#270350); +#285896 = OVER_RIDING_STYLED_ITEM('overriding color',(#285897),#75184, + #284907); +#285897 = PRESENTATION_STYLE_ASSIGNMENT((#285898)); +#285898 = SURFACE_STYLE_USAGE(.BOTH.,#285899); +#285899 = SURFACE_SIDE_STYLE('',(#285900)); +#285900 = SURFACE_STYLE_FILL_AREA(#285901); +#285901 = FILL_AREA_STYLE('',(#285902)); +#285902 = FILL_AREA_STYLE_COLOUR('',#270350); +#285903 = OVER_RIDING_STYLED_ITEM('overriding color',(#285904),#75215, + #284907); +#285904 = PRESENTATION_STYLE_ASSIGNMENT((#285905)); +#285905 = SURFACE_STYLE_USAGE(.BOTH.,#285906); +#285906 = SURFACE_SIDE_STYLE('',(#285907)); +#285907 = SURFACE_STYLE_FILL_AREA(#285908); +#285908 = FILL_AREA_STYLE('',(#285909)); +#285909 = FILL_AREA_STYLE_COLOUR('',#270350); +#285910 = OVER_RIDING_STYLED_ITEM('overriding color',(#285911),#75246, + #284907); +#285911 = PRESENTATION_STYLE_ASSIGNMENT((#285912)); +#285912 = SURFACE_STYLE_USAGE(.BOTH.,#285913); +#285913 = SURFACE_SIDE_STYLE('',(#285914)); +#285914 = SURFACE_STYLE_FILL_AREA(#285915); +#285915 = FILL_AREA_STYLE('',(#285916)); +#285916 = FILL_AREA_STYLE_COLOUR('',#270350); +#285917 = OVER_RIDING_STYLED_ITEM('overriding color',(#285918),#75263, + #284907); +#285918 = PRESENTATION_STYLE_ASSIGNMENT((#285919)); +#285919 = SURFACE_STYLE_USAGE(.BOTH.,#285920); +#285920 = SURFACE_SIDE_STYLE('',(#285921)); +#285921 = SURFACE_STYLE_FILL_AREA(#285922); +#285922 = FILL_AREA_STYLE('',(#285923)); +#285923 = FILL_AREA_STYLE_COLOUR('',#270350); +#285924 = OVER_RIDING_STYLED_ITEM('overriding color',(#285925),#75280, + #284907); +#285925 = PRESENTATION_STYLE_ASSIGNMENT((#285926)); +#285926 = SURFACE_STYLE_USAGE(.BOTH.,#285927); +#285927 = SURFACE_SIDE_STYLE('',(#285928)); +#285928 = SURFACE_STYLE_FILL_AREA(#285929); +#285929 = FILL_AREA_STYLE('',(#285930)); +#285930 = FILL_AREA_STYLE_COLOUR('',#270350); +#285931 = OVER_RIDING_STYLED_ITEM('overriding color',(#285932),#75292, + #284907); +#285932 = PRESENTATION_STYLE_ASSIGNMENT((#285933)); +#285933 = SURFACE_STYLE_USAGE(.BOTH.,#285934); +#285934 = SURFACE_SIDE_STYLE('',(#285935)); +#285935 = SURFACE_STYLE_FILL_AREA(#285936); +#285936 = FILL_AREA_STYLE('',(#285937)); +#285937 = FILL_AREA_STYLE_COLOUR('',#270350); +#285938 = OVER_RIDING_STYLED_ITEM('overriding color',(#285939),#75323, + #284907); +#285939 = PRESENTATION_STYLE_ASSIGNMENT((#285940)); +#285940 = SURFACE_STYLE_USAGE(.BOTH.,#285941); +#285941 = SURFACE_SIDE_STYLE('',(#285942)); +#285942 = SURFACE_STYLE_FILL_AREA(#285943); +#285943 = FILL_AREA_STYLE('',(#285944)); +#285944 = FILL_AREA_STYLE_COLOUR('',#270350); +#285945 = OVER_RIDING_STYLED_ITEM('overriding color',(#285946),#75354, + #284907); +#285946 = PRESENTATION_STYLE_ASSIGNMENT((#285947)); +#285947 = SURFACE_STYLE_USAGE(.BOTH.,#285948); +#285948 = SURFACE_SIDE_STYLE('',(#285949)); +#285949 = SURFACE_STYLE_FILL_AREA(#285950); +#285950 = FILL_AREA_STYLE('',(#285951)); +#285951 = FILL_AREA_STYLE_COLOUR('',#270350); +#285952 = OVER_RIDING_STYLED_ITEM('overriding color',(#285953),#75371, + #284907); +#285953 = PRESENTATION_STYLE_ASSIGNMENT((#285954)); +#285954 = SURFACE_STYLE_USAGE(.BOTH.,#285955); +#285955 = SURFACE_SIDE_STYLE('',(#285956)); +#285956 = SURFACE_STYLE_FILL_AREA(#285957); +#285957 = FILL_AREA_STYLE('',(#285958)); +#285958 = FILL_AREA_STYLE_COLOUR('',#270350); +#285959 = OVER_RIDING_STYLED_ITEM('overriding color',(#285960),#75388, + #284907); +#285960 = PRESENTATION_STYLE_ASSIGNMENT((#285961)); +#285961 = SURFACE_STYLE_USAGE(.BOTH.,#285962); +#285962 = SURFACE_SIDE_STYLE('',(#285963)); +#285963 = SURFACE_STYLE_FILL_AREA(#285964); +#285964 = FILL_AREA_STYLE('',(#285965)); +#285965 = FILL_AREA_STYLE_COLOUR('',#270350); +#285966 = OVER_RIDING_STYLED_ITEM('overriding color',(#285967),#75400, + #284907); +#285967 = PRESENTATION_STYLE_ASSIGNMENT((#285968)); +#285968 = SURFACE_STYLE_USAGE(.BOTH.,#285969); +#285969 = SURFACE_SIDE_STYLE('',(#285970)); +#285970 = SURFACE_STYLE_FILL_AREA(#285971); +#285971 = FILL_AREA_STYLE('',(#285972)); +#285972 = FILL_AREA_STYLE_COLOUR('',#270350); +#285973 = STYLED_ITEM('color',(#285974),#75412); +#285974 = PRESENTATION_STYLE_ASSIGNMENT((#285975,#285980)); +#285975 = SURFACE_STYLE_USAGE(.BOTH.,#285976); +#285976 = SURFACE_SIDE_STYLE('',(#285977)); +#285977 = SURFACE_STYLE_FILL_AREA(#285978); +#285978 = FILL_AREA_STYLE('',(#285979)); +#285979 = FILL_AREA_STYLE_COLOUR('',#281104); +#285980 = CURVE_STYLE('',#285981,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#285981 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#285982 = OVER_RIDING_STYLED_ITEM('overriding color',(#285983),#75414, + #285973); +#285983 = PRESENTATION_STYLE_ASSIGNMENT((#285984)); +#285984 = SURFACE_STYLE_USAGE(.BOTH.,#285985); +#285985 = SURFACE_SIDE_STYLE('',(#285986)); +#285986 = SURFACE_STYLE_FILL_AREA(#285987); +#285987 = FILL_AREA_STYLE('',(#285988)); +#285988 = FILL_AREA_STYLE_COLOUR('',#285989); +#285989 = COLOUR_RGB('',0.859000020776,0.737999965183,0.495999988746); +#285990 = OVER_RIDING_STYLED_ITEM('overriding color',(#285991),#75454, + #285973); +#285991 = PRESENTATION_STYLE_ASSIGNMENT((#285992)); +#285992 = SURFACE_STYLE_USAGE(.BOTH.,#285993); +#285993 = SURFACE_SIDE_STYLE('',(#285994)); +#285994 = SURFACE_STYLE_FILL_AREA(#285995); +#285995 = FILL_AREA_STYLE('',(#285996)); +#285996 = FILL_AREA_STYLE_COLOUR('',#285989); +#285997 = OVER_RIDING_STYLED_ITEM('overriding color',(#285998),#75485, + #285973); +#285998 = PRESENTATION_STYLE_ASSIGNMENT((#285999)); +#285999 = SURFACE_STYLE_USAGE(.BOTH.,#286000); +#286000 = SURFACE_SIDE_STYLE('',(#286001)); +#286001 = SURFACE_STYLE_FILL_AREA(#286002); +#286002 = FILL_AREA_STYLE('',(#286003)); +#286003 = FILL_AREA_STYLE_COLOUR('',#285989); +#286004 = OVER_RIDING_STYLED_ITEM('overriding color',(#286005),#75516, + #285973); +#286005 = PRESENTATION_STYLE_ASSIGNMENT((#286006)); +#286006 = SURFACE_STYLE_USAGE(.BOTH.,#286007); +#286007 = SURFACE_SIDE_STYLE('',(#286008)); +#286008 = SURFACE_STYLE_FILL_AREA(#286009); +#286009 = FILL_AREA_STYLE('',(#286010)); +#286010 = FILL_AREA_STYLE_COLOUR('',#285989); +#286011 = OVER_RIDING_STYLED_ITEM('overriding color',(#286012),#75538, + #285973); +#286012 = PRESENTATION_STYLE_ASSIGNMENT((#286013)); +#286013 = SURFACE_STYLE_USAGE(.BOTH.,#286014); +#286014 = SURFACE_SIDE_STYLE('',(#286015)); +#286015 = SURFACE_STYLE_FILL_AREA(#286016); +#286016 = FILL_AREA_STYLE('',(#286017)); +#286017 = FILL_AREA_STYLE_COLOUR('',#285989); +#286018 = OVER_RIDING_STYLED_ITEM('overriding color',(#286019),#75550, + #285973); +#286019 = PRESENTATION_STYLE_ASSIGNMENT((#286020)); +#286020 = SURFACE_STYLE_USAGE(.BOTH.,#286021); +#286021 = SURFACE_SIDE_STYLE('',(#286022)); +#286022 = SURFACE_STYLE_FILL_AREA(#286023); +#286023 = FILL_AREA_STYLE('',(#286024)); +#286024 = FILL_AREA_STYLE_COLOUR('',#285989); +#286025 = STYLED_ITEM('color',(#286026),#75562); +#286026 = PRESENTATION_STYLE_ASSIGNMENT((#286027,#286032)); +#286027 = SURFACE_STYLE_USAGE(.BOTH.,#286028); +#286028 = SURFACE_SIDE_STYLE('',(#286029)); +#286029 = SURFACE_STYLE_FILL_AREA(#286030); +#286030 = FILL_AREA_STYLE('',(#286031)); +#286031 = FILL_AREA_STYLE_COLOUR('',#281104); +#286032 = CURVE_STYLE('',#286033,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286034 = OVER_RIDING_STYLED_ITEM('overriding color',(#286035),#75564, + #286025); +#286035 = PRESENTATION_STYLE_ASSIGNMENT((#286036)); +#286036 = SURFACE_STYLE_USAGE(.BOTH.,#286037); +#286037 = SURFACE_SIDE_STYLE('',(#286038)); +#286038 = SURFACE_STYLE_FILL_AREA(#286039); +#286039 = FILL_AREA_STYLE('',(#286040)); +#286040 = FILL_AREA_STYLE_COLOUR('',#285989); +#286041 = OVER_RIDING_STYLED_ITEM('overriding color',(#286042),#75604, + #286025); +#286042 = PRESENTATION_STYLE_ASSIGNMENT((#286043)); +#286043 = SURFACE_STYLE_USAGE(.BOTH.,#286044); +#286044 = SURFACE_SIDE_STYLE('',(#286045)); +#286045 = SURFACE_STYLE_FILL_AREA(#286046); +#286046 = FILL_AREA_STYLE('',(#286047)); +#286047 = FILL_AREA_STYLE_COLOUR('',#285989); +#286048 = OVER_RIDING_STYLED_ITEM('overriding color',(#286049),#75635, + #286025); +#286049 = PRESENTATION_STYLE_ASSIGNMENT((#286050)); +#286050 = SURFACE_STYLE_USAGE(.BOTH.,#286051); +#286051 = SURFACE_SIDE_STYLE('',(#286052)); +#286052 = SURFACE_STYLE_FILL_AREA(#286053); +#286053 = FILL_AREA_STYLE('',(#286054)); +#286054 = FILL_AREA_STYLE_COLOUR('',#285989); +#286055 = OVER_RIDING_STYLED_ITEM('overriding color',(#286056),#75666, + #286025); +#286056 = PRESENTATION_STYLE_ASSIGNMENT((#286057)); +#286057 = SURFACE_STYLE_USAGE(.BOTH.,#286058); +#286058 = SURFACE_SIDE_STYLE('',(#286059)); +#286059 = SURFACE_STYLE_FILL_AREA(#286060); +#286060 = FILL_AREA_STYLE('',(#286061)); +#286061 = FILL_AREA_STYLE_COLOUR('',#285989); +#286062 = OVER_RIDING_STYLED_ITEM('overriding color',(#286063),#75688, + #286025); +#286063 = PRESENTATION_STYLE_ASSIGNMENT((#286064)); +#286064 = SURFACE_STYLE_USAGE(.BOTH.,#286065); +#286065 = SURFACE_SIDE_STYLE('',(#286066)); +#286066 = SURFACE_STYLE_FILL_AREA(#286067); +#286067 = FILL_AREA_STYLE('',(#286068)); +#286068 = FILL_AREA_STYLE_COLOUR('',#285989); +#286069 = OVER_RIDING_STYLED_ITEM('overriding color',(#286070),#75700, + #286025); +#286070 = PRESENTATION_STYLE_ASSIGNMENT((#286071)); +#286071 = SURFACE_STYLE_USAGE(.BOTH.,#286072); +#286072 = SURFACE_SIDE_STYLE('',(#286073)); +#286073 = SURFACE_STYLE_FILL_AREA(#286074); +#286074 = FILL_AREA_STYLE('',(#286075)); +#286075 = FILL_AREA_STYLE_COLOUR('',#285989); +#286076 = STYLED_ITEM('color',(#286077),#75712); +#286077 = PRESENTATION_STYLE_ASSIGNMENT((#286078,#286083)); +#286078 = SURFACE_STYLE_USAGE(.BOTH.,#286079); +#286079 = SURFACE_SIDE_STYLE('',(#286080)); +#286080 = SURFACE_STYLE_FILL_AREA(#286081); +#286081 = FILL_AREA_STYLE('',(#286082)); +#286082 = FILL_AREA_STYLE_COLOUR('',#281104); +#286083 = CURVE_STYLE('',#286084,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286085 = OVER_RIDING_STYLED_ITEM('overriding color',(#286086),#75714, + #286076); +#286086 = PRESENTATION_STYLE_ASSIGNMENT((#286087)); +#286087 = SURFACE_STYLE_USAGE(.BOTH.,#286088); +#286088 = SURFACE_SIDE_STYLE('',(#286089)); +#286089 = SURFACE_STYLE_FILL_AREA(#286090); +#286090 = FILL_AREA_STYLE('',(#286091)); +#286091 = FILL_AREA_STYLE_COLOUR('',#285989); +#286092 = OVER_RIDING_STYLED_ITEM('overriding color',(#286093),#75754, + #286076); +#286093 = PRESENTATION_STYLE_ASSIGNMENT((#286094)); +#286094 = SURFACE_STYLE_USAGE(.BOTH.,#286095); +#286095 = SURFACE_SIDE_STYLE('',(#286096)); +#286096 = SURFACE_STYLE_FILL_AREA(#286097); +#286097 = FILL_AREA_STYLE('',(#286098)); +#286098 = FILL_AREA_STYLE_COLOUR('',#285989); +#286099 = OVER_RIDING_STYLED_ITEM('overriding color',(#286100),#75785, + #286076); +#286100 = PRESENTATION_STYLE_ASSIGNMENT((#286101)); +#286101 = SURFACE_STYLE_USAGE(.BOTH.,#286102); +#286102 = SURFACE_SIDE_STYLE('',(#286103)); +#286103 = SURFACE_STYLE_FILL_AREA(#286104); +#286104 = FILL_AREA_STYLE('',(#286105)); +#286105 = FILL_AREA_STYLE_COLOUR('',#285989); +#286106 = OVER_RIDING_STYLED_ITEM('overriding color',(#286107),#75816, + #286076); +#286107 = PRESENTATION_STYLE_ASSIGNMENT((#286108)); +#286108 = SURFACE_STYLE_USAGE(.BOTH.,#286109); +#286109 = SURFACE_SIDE_STYLE('',(#286110)); +#286110 = SURFACE_STYLE_FILL_AREA(#286111); +#286111 = FILL_AREA_STYLE('',(#286112)); +#286112 = FILL_AREA_STYLE_COLOUR('',#285989); +#286113 = OVER_RIDING_STYLED_ITEM('overriding color',(#286114),#75838, + #286076); +#286114 = PRESENTATION_STYLE_ASSIGNMENT((#286115)); +#286115 = SURFACE_STYLE_USAGE(.BOTH.,#286116); +#286116 = SURFACE_SIDE_STYLE('',(#286117)); +#286117 = SURFACE_STYLE_FILL_AREA(#286118); +#286118 = FILL_AREA_STYLE('',(#286119)); +#286119 = FILL_AREA_STYLE_COLOUR('',#285989); +#286120 = OVER_RIDING_STYLED_ITEM('overriding color',(#286121),#75850, + #286076); +#286121 = PRESENTATION_STYLE_ASSIGNMENT((#286122)); +#286122 = SURFACE_STYLE_USAGE(.BOTH.,#286123); +#286123 = SURFACE_SIDE_STYLE('',(#286124)); +#286124 = SURFACE_STYLE_FILL_AREA(#286125); +#286125 = FILL_AREA_STYLE('',(#286126)); +#286126 = FILL_AREA_STYLE_COLOUR('',#285989); +#286127 = STYLED_ITEM('color',(#286128),#75862); +#286128 = PRESENTATION_STYLE_ASSIGNMENT((#286129,#286134)); +#286129 = SURFACE_STYLE_USAGE(.BOTH.,#286130); +#286130 = SURFACE_SIDE_STYLE('',(#286131)); +#286131 = SURFACE_STYLE_FILL_AREA(#286132); +#286132 = FILL_AREA_STYLE('',(#286133)); +#286133 = FILL_AREA_STYLE_COLOUR('',#281104); +#286134 = CURVE_STYLE('',#286135,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286135 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286136 = OVER_RIDING_STYLED_ITEM('overriding color',(#286137),#75864, + #286127); +#286137 = PRESENTATION_STYLE_ASSIGNMENT((#286138)); +#286138 = SURFACE_STYLE_USAGE(.BOTH.,#286139); +#286139 = SURFACE_SIDE_STYLE('',(#286140)); +#286140 = SURFACE_STYLE_FILL_AREA(#286141); +#286141 = FILL_AREA_STYLE('',(#286142)); +#286142 = FILL_AREA_STYLE_COLOUR('',#285989); +#286143 = OVER_RIDING_STYLED_ITEM('overriding color',(#286144),#75904, + #286127); +#286144 = PRESENTATION_STYLE_ASSIGNMENT((#286145)); +#286145 = SURFACE_STYLE_USAGE(.BOTH.,#286146); +#286146 = SURFACE_SIDE_STYLE('',(#286147)); +#286147 = SURFACE_STYLE_FILL_AREA(#286148); +#286148 = FILL_AREA_STYLE('',(#286149)); +#286149 = FILL_AREA_STYLE_COLOUR('',#285989); +#286150 = OVER_RIDING_STYLED_ITEM('overriding color',(#286151),#75935, + #286127); +#286151 = PRESENTATION_STYLE_ASSIGNMENT((#286152)); +#286152 = SURFACE_STYLE_USAGE(.BOTH.,#286153); +#286153 = SURFACE_SIDE_STYLE('',(#286154)); +#286154 = SURFACE_STYLE_FILL_AREA(#286155); +#286155 = FILL_AREA_STYLE('',(#286156)); +#286156 = FILL_AREA_STYLE_COLOUR('',#285989); +#286157 = OVER_RIDING_STYLED_ITEM('overriding color',(#286158),#75966, + #286127); +#286158 = PRESENTATION_STYLE_ASSIGNMENT((#286159)); +#286159 = SURFACE_STYLE_USAGE(.BOTH.,#286160); +#286160 = SURFACE_SIDE_STYLE('',(#286161)); +#286161 = SURFACE_STYLE_FILL_AREA(#286162); +#286162 = FILL_AREA_STYLE('',(#286163)); +#286163 = FILL_AREA_STYLE_COLOUR('',#285989); +#286164 = OVER_RIDING_STYLED_ITEM('overriding color',(#286165),#75988, + #286127); +#286165 = PRESENTATION_STYLE_ASSIGNMENT((#286166)); +#286166 = SURFACE_STYLE_USAGE(.BOTH.,#286167); +#286167 = SURFACE_SIDE_STYLE('',(#286168)); +#286168 = SURFACE_STYLE_FILL_AREA(#286169); +#286169 = FILL_AREA_STYLE('',(#286170)); +#286170 = FILL_AREA_STYLE_COLOUR('',#285989); +#286171 = OVER_RIDING_STYLED_ITEM('overriding color',(#286172),#76000, + #286127); +#286172 = PRESENTATION_STYLE_ASSIGNMENT((#286173)); +#286173 = SURFACE_STYLE_USAGE(.BOTH.,#286174); +#286174 = SURFACE_SIDE_STYLE('',(#286175)); +#286175 = SURFACE_STYLE_FILL_AREA(#286176); +#286176 = FILL_AREA_STYLE('',(#286177)); +#286177 = FILL_AREA_STYLE_COLOUR('',#285989); +#286178 = STYLED_ITEM('color',(#286179),#76012); +#286179 = PRESENTATION_STYLE_ASSIGNMENT((#286180,#286185)); +#286180 = SURFACE_STYLE_USAGE(.BOTH.,#286181); +#286181 = SURFACE_SIDE_STYLE('',(#286182)); +#286182 = SURFACE_STYLE_FILL_AREA(#286183); +#286183 = FILL_AREA_STYLE('',(#286184)); +#286184 = FILL_AREA_STYLE_COLOUR('',#281104); +#286185 = CURVE_STYLE('',#286186,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286186 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286187 = OVER_RIDING_STYLED_ITEM('overriding color',(#286188),#76014, + #286178); +#286188 = PRESENTATION_STYLE_ASSIGNMENT((#286189)); +#286189 = SURFACE_STYLE_USAGE(.BOTH.,#286190); +#286190 = SURFACE_SIDE_STYLE('',(#286191)); +#286191 = SURFACE_STYLE_FILL_AREA(#286192); +#286192 = FILL_AREA_STYLE('',(#286193)); +#286193 = FILL_AREA_STYLE_COLOUR('',#285989); +#286194 = OVER_RIDING_STYLED_ITEM('overriding color',(#286195),#76054, + #286178); +#286195 = PRESENTATION_STYLE_ASSIGNMENT((#286196)); +#286196 = SURFACE_STYLE_USAGE(.BOTH.,#286197); +#286197 = SURFACE_SIDE_STYLE('',(#286198)); +#286198 = SURFACE_STYLE_FILL_AREA(#286199); +#286199 = FILL_AREA_STYLE('',(#286200)); +#286200 = FILL_AREA_STYLE_COLOUR('',#285989); +#286201 = OVER_RIDING_STYLED_ITEM('overriding color',(#286202),#76085, + #286178); +#286202 = PRESENTATION_STYLE_ASSIGNMENT((#286203)); +#286203 = SURFACE_STYLE_USAGE(.BOTH.,#286204); +#286204 = SURFACE_SIDE_STYLE('',(#286205)); +#286205 = SURFACE_STYLE_FILL_AREA(#286206); +#286206 = FILL_AREA_STYLE('',(#286207)); +#286207 = FILL_AREA_STYLE_COLOUR('',#285989); +#286208 = OVER_RIDING_STYLED_ITEM('overriding color',(#286209),#76116, + #286178); +#286209 = PRESENTATION_STYLE_ASSIGNMENT((#286210)); +#286210 = SURFACE_STYLE_USAGE(.BOTH.,#286211); +#286211 = SURFACE_SIDE_STYLE('',(#286212)); +#286212 = SURFACE_STYLE_FILL_AREA(#286213); +#286213 = FILL_AREA_STYLE('',(#286214)); +#286214 = FILL_AREA_STYLE_COLOUR('',#285989); +#286215 = OVER_RIDING_STYLED_ITEM('overriding color',(#286216),#76138, + #286178); +#286216 = PRESENTATION_STYLE_ASSIGNMENT((#286217)); +#286217 = SURFACE_STYLE_USAGE(.BOTH.,#286218); +#286218 = SURFACE_SIDE_STYLE('',(#286219)); +#286219 = SURFACE_STYLE_FILL_AREA(#286220); +#286220 = FILL_AREA_STYLE('',(#286221)); +#286221 = FILL_AREA_STYLE_COLOUR('',#285989); +#286222 = OVER_RIDING_STYLED_ITEM('overriding color',(#286223),#76150, + #286178); +#286223 = PRESENTATION_STYLE_ASSIGNMENT((#286224)); +#286224 = SURFACE_STYLE_USAGE(.BOTH.,#286225); +#286225 = SURFACE_SIDE_STYLE('',(#286226)); +#286226 = SURFACE_STYLE_FILL_AREA(#286227); +#286227 = FILL_AREA_STYLE('',(#286228)); +#286228 = FILL_AREA_STYLE_COLOUR('',#285989); +#286229 = STYLED_ITEM('color',(#286230),#76162); +#286230 = PRESENTATION_STYLE_ASSIGNMENT((#286231,#286236)); +#286231 = SURFACE_STYLE_USAGE(.BOTH.,#286232); +#286232 = SURFACE_SIDE_STYLE('',(#286233)); +#286233 = SURFACE_STYLE_FILL_AREA(#286234); +#286234 = FILL_AREA_STYLE('',(#286235)); +#286235 = FILL_AREA_STYLE_COLOUR('',#281104); +#286236 = CURVE_STYLE('',#286237,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286238 = OVER_RIDING_STYLED_ITEM('overriding color',(#286239),#76164, + #286229); +#286239 = PRESENTATION_STYLE_ASSIGNMENT((#286240)); +#286240 = SURFACE_STYLE_USAGE(.BOTH.,#286241); +#286241 = SURFACE_SIDE_STYLE('',(#286242)); +#286242 = SURFACE_STYLE_FILL_AREA(#286243); +#286243 = FILL_AREA_STYLE('',(#286244)); +#286244 = FILL_AREA_STYLE_COLOUR('',#285989); +#286245 = OVER_RIDING_STYLED_ITEM('overriding color',(#286246),#76204, + #286229); +#286246 = PRESENTATION_STYLE_ASSIGNMENT((#286247)); +#286247 = SURFACE_STYLE_USAGE(.BOTH.,#286248); +#286248 = SURFACE_SIDE_STYLE('',(#286249)); +#286249 = SURFACE_STYLE_FILL_AREA(#286250); +#286250 = FILL_AREA_STYLE('',(#286251)); +#286251 = FILL_AREA_STYLE_COLOUR('',#285989); +#286252 = OVER_RIDING_STYLED_ITEM('overriding color',(#286253),#76235, + #286229); +#286253 = PRESENTATION_STYLE_ASSIGNMENT((#286254)); +#286254 = SURFACE_STYLE_USAGE(.BOTH.,#286255); +#286255 = SURFACE_SIDE_STYLE('',(#286256)); +#286256 = SURFACE_STYLE_FILL_AREA(#286257); +#286257 = FILL_AREA_STYLE('',(#286258)); +#286258 = FILL_AREA_STYLE_COLOUR('',#285989); +#286259 = OVER_RIDING_STYLED_ITEM('overriding color',(#286260),#76266, + #286229); +#286260 = PRESENTATION_STYLE_ASSIGNMENT((#286261)); +#286261 = SURFACE_STYLE_USAGE(.BOTH.,#286262); +#286262 = SURFACE_SIDE_STYLE('',(#286263)); +#286263 = SURFACE_STYLE_FILL_AREA(#286264); +#286264 = FILL_AREA_STYLE('',(#286265)); +#286265 = FILL_AREA_STYLE_COLOUR('',#285989); +#286266 = OVER_RIDING_STYLED_ITEM('overriding color',(#286267),#76288, + #286229); +#286267 = PRESENTATION_STYLE_ASSIGNMENT((#286268)); +#286268 = SURFACE_STYLE_USAGE(.BOTH.,#286269); +#286269 = SURFACE_SIDE_STYLE('',(#286270)); +#286270 = SURFACE_STYLE_FILL_AREA(#286271); +#286271 = FILL_AREA_STYLE('',(#286272)); +#286272 = FILL_AREA_STYLE_COLOUR('',#285989); +#286273 = OVER_RIDING_STYLED_ITEM('overriding color',(#286274),#76300, + #286229); +#286274 = PRESENTATION_STYLE_ASSIGNMENT((#286275)); +#286275 = SURFACE_STYLE_USAGE(.BOTH.,#286276); +#286276 = SURFACE_SIDE_STYLE('',(#286277)); +#286277 = SURFACE_STYLE_FILL_AREA(#286278); +#286278 = FILL_AREA_STYLE('',(#286279)); +#286279 = FILL_AREA_STYLE_COLOUR('',#285989); +#286280 = STYLED_ITEM('color',(#286281),#76312); +#286281 = PRESENTATION_STYLE_ASSIGNMENT((#286282,#286287)); +#286282 = SURFACE_STYLE_USAGE(.BOTH.,#286283); +#286283 = SURFACE_SIDE_STYLE('',(#286284)); +#286284 = SURFACE_STYLE_FILL_AREA(#286285); +#286285 = FILL_AREA_STYLE('',(#286286)); +#286286 = FILL_AREA_STYLE_COLOUR('',#281104); +#286287 = CURVE_STYLE('',#286288,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286288 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286289 = OVER_RIDING_STYLED_ITEM('overriding color',(#286290),#76314, + #286280); +#286290 = PRESENTATION_STYLE_ASSIGNMENT((#286291)); +#286291 = SURFACE_STYLE_USAGE(.BOTH.,#286292); +#286292 = SURFACE_SIDE_STYLE('',(#286293)); +#286293 = SURFACE_STYLE_FILL_AREA(#286294); +#286294 = FILL_AREA_STYLE('',(#286295)); +#286295 = FILL_AREA_STYLE_COLOUR('',#285989); +#286296 = OVER_RIDING_STYLED_ITEM('overriding color',(#286297),#76354, + #286280); +#286297 = PRESENTATION_STYLE_ASSIGNMENT((#286298)); +#286298 = SURFACE_STYLE_USAGE(.BOTH.,#286299); +#286299 = SURFACE_SIDE_STYLE('',(#286300)); +#286300 = SURFACE_STYLE_FILL_AREA(#286301); +#286301 = FILL_AREA_STYLE('',(#286302)); +#286302 = FILL_AREA_STYLE_COLOUR('',#285989); +#286303 = OVER_RIDING_STYLED_ITEM('overriding color',(#286304),#76385, + #286280); +#286304 = PRESENTATION_STYLE_ASSIGNMENT((#286305)); +#286305 = SURFACE_STYLE_USAGE(.BOTH.,#286306); +#286306 = SURFACE_SIDE_STYLE('',(#286307)); +#286307 = SURFACE_STYLE_FILL_AREA(#286308); +#286308 = FILL_AREA_STYLE('',(#286309)); +#286309 = FILL_AREA_STYLE_COLOUR('',#285989); +#286310 = OVER_RIDING_STYLED_ITEM('overriding color',(#286311),#76416, + #286280); +#286311 = PRESENTATION_STYLE_ASSIGNMENT((#286312)); +#286312 = SURFACE_STYLE_USAGE(.BOTH.,#286313); +#286313 = SURFACE_SIDE_STYLE('',(#286314)); +#286314 = SURFACE_STYLE_FILL_AREA(#286315); +#286315 = FILL_AREA_STYLE('',(#286316)); +#286316 = FILL_AREA_STYLE_COLOUR('',#285989); +#286317 = OVER_RIDING_STYLED_ITEM('overriding color',(#286318),#76438, + #286280); +#286318 = PRESENTATION_STYLE_ASSIGNMENT((#286319)); +#286319 = SURFACE_STYLE_USAGE(.BOTH.,#286320); +#286320 = SURFACE_SIDE_STYLE('',(#286321)); +#286321 = SURFACE_STYLE_FILL_AREA(#286322); +#286322 = FILL_AREA_STYLE('',(#286323)); +#286323 = FILL_AREA_STYLE_COLOUR('',#285989); +#286324 = OVER_RIDING_STYLED_ITEM('overriding color',(#286325),#76450, + #286280); +#286325 = PRESENTATION_STYLE_ASSIGNMENT((#286326)); +#286326 = SURFACE_STYLE_USAGE(.BOTH.,#286327); +#286327 = SURFACE_SIDE_STYLE('',(#286328)); +#286328 = SURFACE_STYLE_FILL_AREA(#286329); +#286329 = FILL_AREA_STYLE('',(#286330)); +#286330 = FILL_AREA_STYLE_COLOUR('',#285989); +#286331 = STYLED_ITEM('color',(#286332),#76462); +#286332 = PRESENTATION_STYLE_ASSIGNMENT((#286333,#286338)); +#286333 = SURFACE_STYLE_USAGE(.BOTH.,#286334); +#286334 = SURFACE_SIDE_STYLE('',(#286335)); +#286335 = SURFACE_STYLE_FILL_AREA(#286336); +#286336 = FILL_AREA_STYLE('',(#286337)); +#286337 = FILL_AREA_STYLE_COLOUR('',#281104); +#286338 = CURVE_STYLE('',#286339,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286339 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286340 = OVER_RIDING_STYLED_ITEM('overriding color',(#286341),#76464, + #286331); +#286341 = PRESENTATION_STYLE_ASSIGNMENT((#286342)); +#286342 = SURFACE_STYLE_USAGE(.BOTH.,#286343); +#286343 = SURFACE_SIDE_STYLE('',(#286344)); +#286344 = SURFACE_STYLE_FILL_AREA(#286345); +#286345 = FILL_AREA_STYLE('',(#286346)); +#286346 = FILL_AREA_STYLE_COLOUR('',#285989); +#286347 = OVER_RIDING_STYLED_ITEM('overriding color',(#286348),#76504, + #286331); +#286348 = PRESENTATION_STYLE_ASSIGNMENT((#286349)); +#286349 = SURFACE_STYLE_USAGE(.BOTH.,#286350); +#286350 = SURFACE_SIDE_STYLE('',(#286351)); +#286351 = SURFACE_STYLE_FILL_AREA(#286352); +#286352 = FILL_AREA_STYLE('',(#286353)); +#286353 = FILL_AREA_STYLE_COLOUR('',#285989); +#286354 = OVER_RIDING_STYLED_ITEM('overriding color',(#286355),#76535, + #286331); +#286355 = PRESENTATION_STYLE_ASSIGNMENT((#286356)); +#286356 = SURFACE_STYLE_USAGE(.BOTH.,#286357); +#286357 = SURFACE_SIDE_STYLE('',(#286358)); +#286358 = SURFACE_STYLE_FILL_AREA(#286359); +#286359 = FILL_AREA_STYLE('',(#286360)); +#286360 = FILL_AREA_STYLE_COLOUR('',#285989); +#286361 = OVER_RIDING_STYLED_ITEM('overriding color',(#286362),#76566, + #286331); +#286362 = PRESENTATION_STYLE_ASSIGNMENT((#286363)); +#286363 = SURFACE_STYLE_USAGE(.BOTH.,#286364); +#286364 = SURFACE_SIDE_STYLE('',(#286365)); +#286365 = SURFACE_STYLE_FILL_AREA(#286366); +#286366 = FILL_AREA_STYLE('',(#286367)); +#286367 = FILL_AREA_STYLE_COLOUR('',#285989); +#286368 = OVER_RIDING_STYLED_ITEM('overriding color',(#286369),#76588, + #286331); +#286369 = PRESENTATION_STYLE_ASSIGNMENT((#286370)); +#286370 = SURFACE_STYLE_USAGE(.BOTH.,#286371); +#286371 = SURFACE_SIDE_STYLE('',(#286372)); +#286372 = SURFACE_STYLE_FILL_AREA(#286373); +#286373 = FILL_AREA_STYLE('',(#286374)); +#286374 = FILL_AREA_STYLE_COLOUR('',#285989); +#286375 = OVER_RIDING_STYLED_ITEM('overriding color',(#286376),#76600, + #286331); +#286376 = PRESENTATION_STYLE_ASSIGNMENT((#286377)); +#286377 = SURFACE_STYLE_USAGE(.BOTH.,#286378); +#286378 = SURFACE_SIDE_STYLE('',(#286379)); +#286379 = SURFACE_STYLE_FILL_AREA(#286380); +#286380 = FILL_AREA_STYLE('',(#286381)); +#286381 = FILL_AREA_STYLE_COLOUR('',#285989); +#286382 = STYLED_ITEM('color',(#286383),#76612); +#286383 = PRESENTATION_STYLE_ASSIGNMENT((#286384,#286389)); +#286384 = SURFACE_STYLE_USAGE(.BOTH.,#286385); +#286385 = SURFACE_SIDE_STYLE('',(#286386)); +#286386 = SURFACE_STYLE_FILL_AREA(#286387); +#286387 = FILL_AREA_STYLE('',(#286388)); +#286388 = FILL_AREA_STYLE_COLOUR('',#281104); +#286389 = CURVE_STYLE('',#286390,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286391 = OVER_RIDING_STYLED_ITEM('overriding color',(#286392),#76614, + #286382); +#286392 = PRESENTATION_STYLE_ASSIGNMENT((#286393)); +#286393 = SURFACE_STYLE_USAGE(.BOTH.,#286394); +#286394 = SURFACE_SIDE_STYLE('',(#286395)); +#286395 = SURFACE_STYLE_FILL_AREA(#286396); +#286396 = FILL_AREA_STYLE('',(#286397)); +#286397 = FILL_AREA_STYLE_COLOUR('',#285989); +#286398 = OVER_RIDING_STYLED_ITEM('overriding color',(#286399),#76654, + #286382); +#286399 = PRESENTATION_STYLE_ASSIGNMENT((#286400)); +#286400 = SURFACE_STYLE_USAGE(.BOTH.,#286401); +#286401 = SURFACE_SIDE_STYLE('',(#286402)); +#286402 = SURFACE_STYLE_FILL_AREA(#286403); +#286403 = FILL_AREA_STYLE('',(#286404)); +#286404 = FILL_AREA_STYLE_COLOUR('',#285989); +#286405 = OVER_RIDING_STYLED_ITEM('overriding color',(#286406),#76685, + #286382); +#286406 = PRESENTATION_STYLE_ASSIGNMENT((#286407)); +#286407 = SURFACE_STYLE_USAGE(.BOTH.,#286408); +#286408 = SURFACE_SIDE_STYLE('',(#286409)); +#286409 = SURFACE_STYLE_FILL_AREA(#286410); +#286410 = FILL_AREA_STYLE('',(#286411)); +#286411 = FILL_AREA_STYLE_COLOUR('',#285989); +#286412 = OVER_RIDING_STYLED_ITEM('overriding color',(#286413),#76716, + #286382); +#286413 = PRESENTATION_STYLE_ASSIGNMENT((#286414)); +#286414 = SURFACE_STYLE_USAGE(.BOTH.,#286415); +#286415 = SURFACE_SIDE_STYLE('',(#286416)); +#286416 = SURFACE_STYLE_FILL_AREA(#286417); +#286417 = FILL_AREA_STYLE('',(#286418)); +#286418 = FILL_AREA_STYLE_COLOUR('',#285989); +#286419 = OVER_RIDING_STYLED_ITEM('overriding color',(#286420),#76738, + #286382); +#286420 = PRESENTATION_STYLE_ASSIGNMENT((#286421)); +#286421 = SURFACE_STYLE_USAGE(.BOTH.,#286422); +#286422 = SURFACE_SIDE_STYLE('',(#286423)); +#286423 = SURFACE_STYLE_FILL_AREA(#286424); +#286424 = FILL_AREA_STYLE('',(#286425)); +#286425 = FILL_AREA_STYLE_COLOUR('',#285989); +#286426 = OVER_RIDING_STYLED_ITEM('overriding color',(#286427),#76750, + #286382); +#286427 = PRESENTATION_STYLE_ASSIGNMENT((#286428)); +#286428 = SURFACE_STYLE_USAGE(.BOTH.,#286429); +#286429 = SURFACE_SIDE_STYLE('',(#286430)); +#286430 = SURFACE_STYLE_FILL_AREA(#286431); +#286431 = FILL_AREA_STYLE('',(#286432)); +#286432 = FILL_AREA_STYLE_COLOUR('',#285989); +#286433 = STYLED_ITEM('color',(#286434),#76762); +#286434 = PRESENTATION_STYLE_ASSIGNMENT((#286435,#286440)); +#286435 = SURFACE_STYLE_USAGE(.BOTH.,#286436); +#286436 = SURFACE_SIDE_STYLE('',(#286437)); +#286437 = SURFACE_STYLE_FILL_AREA(#286438); +#286438 = FILL_AREA_STYLE('',(#286439)); +#286439 = FILL_AREA_STYLE_COLOUR('',#281104); +#286440 = CURVE_STYLE('',#286441,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286441 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286442 = OVER_RIDING_STYLED_ITEM('overriding color',(#286443),#76764, + #286433); +#286443 = PRESENTATION_STYLE_ASSIGNMENT((#286444)); +#286444 = SURFACE_STYLE_USAGE(.BOTH.,#286445); +#286445 = SURFACE_SIDE_STYLE('',(#286446)); +#286446 = SURFACE_STYLE_FILL_AREA(#286447); +#286447 = FILL_AREA_STYLE('',(#286448)); +#286448 = FILL_AREA_STYLE_COLOUR('',#285989); +#286449 = OVER_RIDING_STYLED_ITEM('overriding color',(#286450),#76804, + #286433); +#286450 = PRESENTATION_STYLE_ASSIGNMENT((#286451)); +#286451 = SURFACE_STYLE_USAGE(.BOTH.,#286452); +#286452 = SURFACE_SIDE_STYLE('',(#286453)); +#286453 = SURFACE_STYLE_FILL_AREA(#286454); +#286454 = FILL_AREA_STYLE('',(#286455)); +#286455 = FILL_AREA_STYLE_COLOUR('',#285989); +#286456 = OVER_RIDING_STYLED_ITEM('overriding color',(#286457),#76835, + #286433); +#286457 = PRESENTATION_STYLE_ASSIGNMENT((#286458)); +#286458 = SURFACE_STYLE_USAGE(.BOTH.,#286459); +#286459 = SURFACE_SIDE_STYLE('',(#286460)); +#286460 = SURFACE_STYLE_FILL_AREA(#286461); +#286461 = FILL_AREA_STYLE('',(#286462)); +#286462 = FILL_AREA_STYLE_COLOUR('',#285989); +#286463 = OVER_RIDING_STYLED_ITEM('overriding color',(#286464),#76866, + #286433); +#286464 = PRESENTATION_STYLE_ASSIGNMENT((#286465)); +#286465 = SURFACE_STYLE_USAGE(.BOTH.,#286466); +#286466 = SURFACE_SIDE_STYLE('',(#286467)); +#286467 = SURFACE_STYLE_FILL_AREA(#286468); +#286468 = FILL_AREA_STYLE('',(#286469)); +#286469 = FILL_AREA_STYLE_COLOUR('',#285989); +#286470 = OVER_RIDING_STYLED_ITEM('overriding color',(#286471),#76888, + #286433); +#286471 = PRESENTATION_STYLE_ASSIGNMENT((#286472)); +#286472 = SURFACE_STYLE_USAGE(.BOTH.,#286473); +#286473 = SURFACE_SIDE_STYLE('',(#286474)); +#286474 = SURFACE_STYLE_FILL_AREA(#286475); +#286475 = FILL_AREA_STYLE('',(#286476)); +#286476 = FILL_AREA_STYLE_COLOUR('',#285989); +#286477 = OVER_RIDING_STYLED_ITEM('overriding color',(#286478),#76900, + #286433); +#286478 = PRESENTATION_STYLE_ASSIGNMENT((#286479)); +#286479 = SURFACE_STYLE_USAGE(.BOTH.,#286480); +#286480 = SURFACE_SIDE_STYLE('',(#286481)); +#286481 = SURFACE_STYLE_FILL_AREA(#286482); +#286482 = FILL_AREA_STYLE('',(#286483)); +#286483 = FILL_AREA_STYLE_COLOUR('',#285989); +#286484 = STYLED_ITEM('color',(#286485),#76912); +#286485 = PRESENTATION_STYLE_ASSIGNMENT((#286486,#286491)); +#286486 = SURFACE_STYLE_USAGE(.BOTH.,#286487); +#286487 = SURFACE_SIDE_STYLE('',(#286488)); +#286488 = SURFACE_STYLE_FILL_AREA(#286489); +#286489 = FILL_AREA_STYLE('',(#286490)); +#286490 = FILL_AREA_STYLE_COLOUR('',#281104); +#286491 = CURVE_STYLE('',#286492,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286492 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286493 = OVER_RIDING_STYLED_ITEM('overriding color',(#286494),#76914, + #286484); +#286494 = PRESENTATION_STYLE_ASSIGNMENT((#286495)); +#286495 = SURFACE_STYLE_USAGE(.BOTH.,#286496); +#286496 = SURFACE_SIDE_STYLE('',(#286497)); +#286497 = SURFACE_STYLE_FILL_AREA(#286498); +#286498 = FILL_AREA_STYLE('',(#286499)); +#286499 = FILL_AREA_STYLE_COLOUR('',#285989); +#286500 = OVER_RIDING_STYLED_ITEM('overriding color',(#286501),#76954, + #286484); +#286501 = PRESENTATION_STYLE_ASSIGNMENT((#286502)); +#286502 = SURFACE_STYLE_USAGE(.BOTH.,#286503); +#286503 = SURFACE_SIDE_STYLE('',(#286504)); +#286504 = SURFACE_STYLE_FILL_AREA(#286505); +#286505 = FILL_AREA_STYLE('',(#286506)); +#286506 = FILL_AREA_STYLE_COLOUR('',#285989); +#286507 = OVER_RIDING_STYLED_ITEM('overriding color',(#286508),#76985, + #286484); +#286508 = PRESENTATION_STYLE_ASSIGNMENT((#286509)); +#286509 = SURFACE_STYLE_USAGE(.BOTH.,#286510); +#286510 = SURFACE_SIDE_STYLE('',(#286511)); +#286511 = SURFACE_STYLE_FILL_AREA(#286512); +#286512 = FILL_AREA_STYLE('',(#286513)); +#286513 = FILL_AREA_STYLE_COLOUR('',#285989); +#286514 = OVER_RIDING_STYLED_ITEM('overriding color',(#286515),#77016, + #286484); +#286515 = PRESENTATION_STYLE_ASSIGNMENT((#286516)); +#286516 = SURFACE_STYLE_USAGE(.BOTH.,#286517); +#286517 = SURFACE_SIDE_STYLE('',(#286518)); +#286518 = SURFACE_STYLE_FILL_AREA(#286519); +#286519 = FILL_AREA_STYLE('',(#286520)); +#286520 = FILL_AREA_STYLE_COLOUR('',#285989); +#286521 = OVER_RIDING_STYLED_ITEM('overriding color',(#286522),#77038, + #286484); +#286522 = PRESENTATION_STYLE_ASSIGNMENT((#286523)); +#286523 = SURFACE_STYLE_USAGE(.BOTH.,#286524); +#286524 = SURFACE_SIDE_STYLE('',(#286525)); +#286525 = SURFACE_STYLE_FILL_AREA(#286526); +#286526 = FILL_AREA_STYLE('',(#286527)); +#286527 = FILL_AREA_STYLE_COLOUR('',#285989); +#286528 = OVER_RIDING_STYLED_ITEM('overriding color',(#286529),#77050, + #286484); +#286529 = PRESENTATION_STYLE_ASSIGNMENT((#286530)); +#286530 = SURFACE_STYLE_USAGE(.BOTH.,#286531); +#286531 = SURFACE_SIDE_STYLE('',(#286532)); +#286532 = SURFACE_STYLE_FILL_AREA(#286533); +#286533 = FILL_AREA_STYLE('',(#286534)); +#286534 = FILL_AREA_STYLE_COLOUR('',#285989); +#286535 = STYLED_ITEM('color',(#286536),#77062); +#286536 = PRESENTATION_STYLE_ASSIGNMENT((#286537,#286542)); +#286537 = SURFACE_STYLE_USAGE(.BOTH.,#286538); +#286538 = SURFACE_SIDE_STYLE('',(#286539)); +#286539 = SURFACE_STYLE_FILL_AREA(#286540); +#286540 = FILL_AREA_STYLE('',(#286541)); +#286541 = FILL_AREA_STYLE_COLOUR('',#281104); +#286542 = CURVE_STYLE('',#286543,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286544 = OVER_RIDING_STYLED_ITEM('overriding color',(#286545),#77064, + #286535); +#286545 = PRESENTATION_STYLE_ASSIGNMENT((#286546)); +#286546 = SURFACE_STYLE_USAGE(.BOTH.,#286547); +#286547 = SURFACE_SIDE_STYLE('',(#286548)); +#286548 = SURFACE_STYLE_FILL_AREA(#286549); +#286549 = FILL_AREA_STYLE('',(#286550)); +#286550 = FILL_AREA_STYLE_COLOUR('',#285989); +#286551 = OVER_RIDING_STYLED_ITEM('overriding color',(#286552),#77104, + #286535); +#286552 = PRESENTATION_STYLE_ASSIGNMENT((#286553)); +#286553 = SURFACE_STYLE_USAGE(.BOTH.,#286554); +#286554 = SURFACE_SIDE_STYLE('',(#286555)); +#286555 = SURFACE_STYLE_FILL_AREA(#286556); +#286556 = FILL_AREA_STYLE('',(#286557)); +#286557 = FILL_AREA_STYLE_COLOUR('',#285989); +#286558 = OVER_RIDING_STYLED_ITEM('overriding color',(#286559),#77135, + #286535); +#286559 = PRESENTATION_STYLE_ASSIGNMENT((#286560)); +#286560 = SURFACE_STYLE_USAGE(.BOTH.,#286561); +#286561 = SURFACE_SIDE_STYLE('',(#286562)); +#286562 = SURFACE_STYLE_FILL_AREA(#286563); +#286563 = FILL_AREA_STYLE('',(#286564)); +#286564 = FILL_AREA_STYLE_COLOUR('',#285989); +#286565 = OVER_RIDING_STYLED_ITEM('overriding color',(#286566),#77166, + #286535); +#286566 = PRESENTATION_STYLE_ASSIGNMENT((#286567)); +#286567 = SURFACE_STYLE_USAGE(.BOTH.,#286568); +#286568 = SURFACE_SIDE_STYLE('',(#286569)); +#286569 = SURFACE_STYLE_FILL_AREA(#286570); +#286570 = FILL_AREA_STYLE('',(#286571)); +#286571 = FILL_AREA_STYLE_COLOUR('',#285989); +#286572 = OVER_RIDING_STYLED_ITEM('overriding color',(#286573),#77188, + #286535); +#286573 = PRESENTATION_STYLE_ASSIGNMENT((#286574)); +#286574 = SURFACE_STYLE_USAGE(.BOTH.,#286575); +#286575 = SURFACE_SIDE_STYLE('',(#286576)); +#286576 = SURFACE_STYLE_FILL_AREA(#286577); +#286577 = FILL_AREA_STYLE('',(#286578)); +#286578 = FILL_AREA_STYLE_COLOUR('',#285989); +#286579 = OVER_RIDING_STYLED_ITEM('overriding color',(#286580),#77200, + #286535); +#286580 = PRESENTATION_STYLE_ASSIGNMENT((#286581)); +#286581 = SURFACE_STYLE_USAGE(.BOTH.,#286582); +#286582 = SURFACE_SIDE_STYLE('',(#286583)); +#286583 = SURFACE_STYLE_FILL_AREA(#286584); +#286584 = FILL_AREA_STYLE('',(#286585)); +#286585 = FILL_AREA_STYLE_COLOUR('',#285989); +#286586 = STYLED_ITEM('color',(#286587),#77212); +#286587 = PRESENTATION_STYLE_ASSIGNMENT((#286588,#286593)); +#286588 = SURFACE_STYLE_USAGE(.BOTH.,#286589); +#286589 = SURFACE_SIDE_STYLE('',(#286590)); +#286590 = SURFACE_STYLE_FILL_AREA(#286591); +#286591 = FILL_AREA_STYLE('',(#286592)); +#286592 = FILL_AREA_STYLE_COLOUR('',#281104); +#286593 = CURVE_STYLE('',#286594,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286594 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286595 = OVER_RIDING_STYLED_ITEM('overriding color',(#286596),#77214, + #286586); +#286596 = PRESENTATION_STYLE_ASSIGNMENT((#286597)); +#286597 = SURFACE_STYLE_USAGE(.BOTH.,#286598); +#286598 = SURFACE_SIDE_STYLE('',(#286599)); +#286599 = SURFACE_STYLE_FILL_AREA(#286600); +#286600 = FILL_AREA_STYLE('',(#286601)); +#286601 = FILL_AREA_STYLE_COLOUR('',#285989); +#286602 = OVER_RIDING_STYLED_ITEM('overriding color',(#286603),#77254, + #286586); +#286603 = PRESENTATION_STYLE_ASSIGNMENT((#286604)); +#286604 = SURFACE_STYLE_USAGE(.BOTH.,#286605); +#286605 = SURFACE_SIDE_STYLE('',(#286606)); +#286606 = SURFACE_STYLE_FILL_AREA(#286607); +#286607 = FILL_AREA_STYLE('',(#286608)); +#286608 = FILL_AREA_STYLE_COLOUR('',#285989); +#286609 = OVER_RIDING_STYLED_ITEM('overriding color',(#286610),#77285, + #286586); +#286610 = PRESENTATION_STYLE_ASSIGNMENT((#286611)); +#286611 = SURFACE_STYLE_USAGE(.BOTH.,#286612); +#286612 = SURFACE_SIDE_STYLE('',(#286613)); +#286613 = SURFACE_STYLE_FILL_AREA(#286614); +#286614 = FILL_AREA_STYLE('',(#286615)); +#286615 = FILL_AREA_STYLE_COLOUR('',#285989); +#286616 = OVER_RIDING_STYLED_ITEM('overriding color',(#286617),#77316, + #286586); +#286617 = PRESENTATION_STYLE_ASSIGNMENT((#286618)); +#286618 = SURFACE_STYLE_USAGE(.BOTH.,#286619); +#286619 = SURFACE_SIDE_STYLE('',(#286620)); +#286620 = SURFACE_STYLE_FILL_AREA(#286621); +#286621 = FILL_AREA_STYLE('',(#286622)); +#286622 = FILL_AREA_STYLE_COLOUR('',#285989); +#286623 = OVER_RIDING_STYLED_ITEM('overriding color',(#286624),#77338, + #286586); +#286624 = PRESENTATION_STYLE_ASSIGNMENT((#286625)); +#286625 = SURFACE_STYLE_USAGE(.BOTH.,#286626); +#286626 = SURFACE_SIDE_STYLE('',(#286627)); +#286627 = SURFACE_STYLE_FILL_AREA(#286628); +#286628 = FILL_AREA_STYLE('',(#286629)); +#286629 = FILL_AREA_STYLE_COLOUR('',#285989); +#286630 = OVER_RIDING_STYLED_ITEM('overriding color',(#286631),#77350, + #286586); +#286631 = PRESENTATION_STYLE_ASSIGNMENT((#286632)); +#286632 = SURFACE_STYLE_USAGE(.BOTH.,#286633); +#286633 = SURFACE_SIDE_STYLE('',(#286634)); +#286634 = SURFACE_STYLE_FILL_AREA(#286635); +#286635 = FILL_AREA_STYLE('',(#286636)); +#286636 = FILL_AREA_STYLE_COLOUR('',#285989); +#286637 = STYLED_ITEM('color',(#286638),#77362); +#286638 = PRESENTATION_STYLE_ASSIGNMENT((#286639,#286644)); +#286639 = SURFACE_STYLE_USAGE(.BOTH.,#286640); +#286640 = SURFACE_SIDE_STYLE('',(#286641)); +#286641 = SURFACE_STYLE_FILL_AREA(#286642); +#286642 = FILL_AREA_STYLE('',(#286643)); +#286643 = FILL_AREA_STYLE_COLOUR('',#281104); +#286644 = CURVE_STYLE('',#286645,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286645 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286646 = OVER_RIDING_STYLED_ITEM('overriding color',(#286647),#77364, + #286637); +#286647 = PRESENTATION_STYLE_ASSIGNMENT((#286648)); +#286648 = SURFACE_STYLE_USAGE(.BOTH.,#286649); +#286649 = SURFACE_SIDE_STYLE('',(#286650)); +#286650 = SURFACE_STYLE_FILL_AREA(#286651); +#286651 = FILL_AREA_STYLE('',(#286652)); +#286652 = FILL_AREA_STYLE_COLOUR('',#285989); +#286653 = OVER_RIDING_STYLED_ITEM('overriding color',(#286654),#77404, + #286637); +#286654 = PRESENTATION_STYLE_ASSIGNMENT((#286655)); +#286655 = SURFACE_STYLE_USAGE(.BOTH.,#286656); +#286656 = SURFACE_SIDE_STYLE('',(#286657)); +#286657 = SURFACE_STYLE_FILL_AREA(#286658); +#286658 = FILL_AREA_STYLE('',(#286659)); +#286659 = FILL_AREA_STYLE_COLOUR('',#285989); +#286660 = OVER_RIDING_STYLED_ITEM('overriding color',(#286661),#77435, + #286637); +#286661 = PRESENTATION_STYLE_ASSIGNMENT((#286662)); +#286662 = SURFACE_STYLE_USAGE(.BOTH.,#286663); +#286663 = SURFACE_SIDE_STYLE('',(#286664)); +#286664 = SURFACE_STYLE_FILL_AREA(#286665); +#286665 = FILL_AREA_STYLE('',(#286666)); +#286666 = FILL_AREA_STYLE_COLOUR('',#285989); +#286667 = OVER_RIDING_STYLED_ITEM('overriding color',(#286668),#77466, + #286637); +#286668 = PRESENTATION_STYLE_ASSIGNMENT((#286669)); +#286669 = SURFACE_STYLE_USAGE(.BOTH.,#286670); +#286670 = SURFACE_SIDE_STYLE('',(#286671)); +#286671 = SURFACE_STYLE_FILL_AREA(#286672); +#286672 = FILL_AREA_STYLE('',(#286673)); +#286673 = FILL_AREA_STYLE_COLOUR('',#285989); +#286674 = OVER_RIDING_STYLED_ITEM('overriding color',(#286675),#77488, + #286637); +#286675 = PRESENTATION_STYLE_ASSIGNMENT((#286676)); +#286676 = SURFACE_STYLE_USAGE(.BOTH.,#286677); +#286677 = SURFACE_SIDE_STYLE('',(#286678)); +#286678 = SURFACE_STYLE_FILL_AREA(#286679); +#286679 = FILL_AREA_STYLE('',(#286680)); +#286680 = FILL_AREA_STYLE_COLOUR('',#285989); +#286681 = OVER_RIDING_STYLED_ITEM('overriding color',(#286682),#77500, + #286637); +#286682 = PRESENTATION_STYLE_ASSIGNMENT((#286683)); +#286683 = SURFACE_STYLE_USAGE(.BOTH.,#286684); +#286684 = SURFACE_SIDE_STYLE('',(#286685)); +#286685 = SURFACE_STYLE_FILL_AREA(#286686); +#286686 = FILL_AREA_STYLE('',(#286687)); +#286687 = FILL_AREA_STYLE_COLOUR('',#285989); +#286688 = STYLED_ITEM('color',(#286689),#77512); +#286689 = PRESENTATION_STYLE_ASSIGNMENT((#286690,#286695)); +#286690 = SURFACE_STYLE_USAGE(.BOTH.,#286691); +#286691 = SURFACE_SIDE_STYLE('',(#286692)); +#286692 = SURFACE_STYLE_FILL_AREA(#286693); +#286693 = FILL_AREA_STYLE('',(#286694)); +#286694 = FILL_AREA_STYLE_COLOUR('',#281104); +#286695 = CURVE_STYLE('',#286696,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286697 = OVER_RIDING_STYLED_ITEM('overriding color',(#286698),#77514, + #286688); +#286698 = PRESENTATION_STYLE_ASSIGNMENT((#286699)); +#286699 = SURFACE_STYLE_USAGE(.BOTH.,#286700); +#286700 = SURFACE_SIDE_STYLE('',(#286701)); +#286701 = SURFACE_STYLE_FILL_AREA(#286702); +#286702 = FILL_AREA_STYLE('',(#286703)); +#286703 = FILL_AREA_STYLE_COLOUR('',#285989); +#286704 = OVER_RIDING_STYLED_ITEM('overriding color',(#286705),#77554, + #286688); +#286705 = PRESENTATION_STYLE_ASSIGNMENT((#286706)); +#286706 = SURFACE_STYLE_USAGE(.BOTH.,#286707); +#286707 = SURFACE_SIDE_STYLE('',(#286708)); +#286708 = SURFACE_STYLE_FILL_AREA(#286709); +#286709 = FILL_AREA_STYLE('',(#286710)); +#286710 = FILL_AREA_STYLE_COLOUR('',#285989); +#286711 = OVER_RIDING_STYLED_ITEM('overriding color',(#286712),#77585, + #286688); +#286712 = PRESENTATION_STYLE_ASSIGNMENT((#286713)); +#286713 = SURFACE_STYLE_USAGE(.BOTH.,#286714); +#286714 = SURFACE_SIDE_STYLE('',(#286715)); +#286715 = SURFACE_STYLE_FILL_AREA(#286716); +#286716 = FILL_AREA_STYLE('',(#286717)); +#286717 = FILL_AREA_STYLE_COLOUR('',#285989); +#286718 = OVER_RIDING_STYLED_ITEM('overriding color',(#286719),#77616, + #286688); +#286719 = PRESENTATION_STYLE_ASSIGNMENT((#286720)); +#286720 = SURFACE_STYLE_USAGE(.BOTH.,#286721); +#286721 = SURFACE_SIDE_STYLE('',(#286722)); +#286722 = SURFACE_STYLE_FILL_AREA(#286723); +#286723 = FILL_AREA_STYLE('',(#286724)); +#286724 = FILL_AREA_STYLE_COLOUR('',#285989); +#286725 = OVER_RIDING_STYLED_ITEM('overriding color',(#286726),#77638, + #286688); +#286726 = PRESENTATION_STYLE_ASSIGNMENT((#286727)); +#286727 = SURFACE_STYLE_USAGE(.BOTH.,#286728); +#286728 = SURFACE_SIDE_STYLE('',(#286729)); +#286729 = SURFACE_STYLE_FILL_AREA(#286730); +#286730 = FILL_AREA_STYLE('',(#286731)); +#286731 = FILL_AREA_STYLE_COLOUR('',#285989); +#286732 = OVER_RIDING_STYLED_ITEM('overriding color',(#286733),#77650, + #286688); +#286733 = PRESENTATION_STYLE_ASSIGNMENT((#286734)); +#286734 = SURFACE_STYLE_USAGE(.BOTH.,#286735); +#286735 = SURFACE_SIDE_STYLE('',(#286736)); +#286736 = SURFACE_STYLE_FILL_AREA(#286737); +#286737 = FILL_AREA_STYLE('',(#286738)); +#286738 = FILL_AREA_STYLE_COLOUR('',#285989); +#286739 = STYLED_ITEM('color',(#286740),#77662); +#286740 = PRESENTATION_STYLE_ASSIGNMENT((#286741,#286746)); +#286741 = SURFACE_STYLE_USAGE(.BOTH.,#286742); +#286742 = SURFACE_SIDE_STYLE('',(#286743)); +#286743 = SURFACE_STYLE_FILL_AREA(#286744); +#286744 = FILL_AREA_STYLE('',(#286745)); +#286745 = FILL_AREA_STYLE_COLOUR('',#281104); +#286746 = CURVE_STYLE('',#286747,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286747 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286748 = OVER_RIDING_STYLED_ITEM('overriding color',(#286749),#77664, + #286739); +#286749 = PRESENTATION_STYLE_ASSIGNMENT((#286750)); +#286750 = SURFACE_STYLE_USAGE(.BOTH.,#286751); +#286751 = SURFACE_SIDE_STYLE('',(#286752)); +#286752 = SURFACE_STYLE_FILL_AREA(#286753); +#286753 = FILL_AREA_STYLE('',(#286754)); +#286754 = FILL_AREA_STYLE_COLOUR('',#285989); +#286755 = OVER_RIDING_STYLED_ITEM('overriding color',(#286756),#77704, + #286739); +#286756 = PRESENTATION_STYLE_ASSIGNMENT((#286757)); +#286757 = SURFACE_STYLE_USAGE(.BOTH.,#286758); +#286758 = SURFACE_SIDE_STYLE('',(#286759)); +#286759 = SURFACE_STYLE_FILL_AREA(#286760); +#286760 = FILL_AREA_STYLE('',(#286761)); +#286761 = FILL_AREA_STYLE_COLOUR('',#285989); +#286762 = OVER_RIDING_STYLED_ITEM('overriding color',(#286763),#77735, + #286739); +#286763 = PRESENTATION_STYLE_ASSIGNMENT((#286764)); +#286764 = SURFACE_STYLE_USAGE(.BOTH.,#286765); +#286765 = SURFACE_SIDE_STYLE('',(#286766)); +#286766 = SURFACE_STYLE_FILL_AREA(#286767); +#286767 = FILL_AREA_STYLE('',(#286768)); +#286768 = FILL_AREA_STYLE_COLOUR('',#285989); +#286769 = OVER_RIDING_STYLED_ITEM('overriding color',(#286770),#77766, + #286739); +#286770 = PRESENTATION_STYLE_ASSIGNMENT((#286771)); +#286771 = SURFACE_STYLE_USAGE(.BOTH.,#286772); +#286772 = SURFACE_SIDE_STYLE('',(#286773)); +#286773 = SURFACE_STYLE_FILL_AREA(#286774); +#286774 = FILL_AREA_STYLE('',(#286775)); +#286775 = FILL_AREA_STYLE_COLOUR('',#285989); +#286776 = OVER_RIDING_STYLED_ITEM('overriding color',(#286777),#77788, + #286739); +#286777 = PRESENTATION_STYLE_ASSIGNMENT((#286778)); +#286778 = SURFACE_STYLE_USAGE(.BOTH.,#286779); +#286779 = SURFACE_SIDE_STYLE('',(#286780)); +#286780 = SURFACE_STYLE_FILL_AREA(#286781); +#286781 = FILL_AREA_STYLE('',(#286782)); +#286782 = FILL_AREA_STYLE_COLOUR('',#285989); +#286783 = OVER_RIDING_STYLED_ITEM('overriding color',(#286784),#77800, + #286739); +#286784 = PRESENTATION_STYLE_ASSIGNMENT((#286785)); +#286785 = SURFACE_STYLE_USAGE(.BOTH.,#286786); +#286786 = SURFACE_SIDE_STYLE('',(#286787)); +#286787 = SURFACE_STYLE_FILL_AREA(#286788); +#286788 = FILL_AREA_STYLE('',(#286789)); +#286789 = FILL_AREA_STYLE_COLOUR('',#285989); +#286790 = STYLED_ITEM('color',(#286791),#77812); +#286791 = PRESENTATION_STYLE_ASSIGNMENT((#286792,#286797)); +#286792 = SURFACE_STYLE_USAGE(.BOTH.,#286793); +#286793 = SURFACE_SIDE_STYLE('',(#286794)); +#286794 = SURFACE_STYLE_FILL_AREA(#286795); +#286795 = FILL_AREA_STYLE('',(#286796)); +#286796 = FILL_AREA_STYLE_COLOUR('',#281104); +#286797 = CURVE_STYLE('',#286798,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286798 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286799 = OVER_RIDING_STYLED_ITEM('overriding color',(#286800),#77814, + #286790); +#286800 = PRESENTATION_STYLE_ASSIGNMENT((#286801)); +#286801 = SURFACE_STYLE_USAGE(.BOTH.,#286802); +#286802 = SURFACE_SIDE_STYLE('',(#286803)); +#286803 = SURFACE_STYLE_FILL_AREA(#286804); +#286804 = FILL_AREA_STYLE('',(#286805)); +#286805 = FILL_AREA_STYLE_COLOUR('',#285989); +#286806 = OVER_RIDING_STYLED_ITEM('overriding color',(#286807),#77870, + #286790); +#286807 = PRESENTATION_STYLE_ASSIGNMENT((#286808)); +#286808 = SURFACE_STYLE_USAGE(.BOTH.,#286809); +#286809 = SURFACE_SIDE_STYLE('',(#286810)); +#286810 = SURFACE_STYLE_FILL_AREA(#286811); +#286811 = FILL_AREA_STYLE('',(#286812)); +#286812 = FILL_AREA_STYLE_COLOUR('',#285989); +#286813 = OVER_RIDING_STYLED_ITEM('overriding color',(#286814),#77901, + #286790); +#286814 = PRESENTATION_STYLE_ASSIGNMENT((#286815)); +#286815 = SURFACE_STYLE_USAGE(.BOTH.,#286816); +#286816 = SURFACE_SIDE_STYLE('',(#286817)); +#286817 = SURFACE_STYLE_FILL_AREA(#286818); +#286818 = FILL_AREA_STYLE('',(#286819)); +#286819 = FILL_AREA_STYLE_COLOUR('',#285989); +#286820 = OVER_RIDING_STYLED_ITEM('overriding color',(#286821),#77925, + #286790); +#286821 = PRESENTATION_STYLE_ASSIGNMENT((#286822)); +#286822 = SURFACE_STYLE_USAGE(.BOTH.,#286823); +#286823 = SURFACE_SIDE_STYLE('',(#286824)); +#286824 = SURFACE_STYLE_FILL_AREA(#286825); +#286825 = FILL_AREA_STYLE('',(#286826)); +#286826 = FILL_AREA_STYLE_COLOUR('',#285989); +#286827 = OVER_RIDING_STYLED_ITEM('overriding color',(#286828),#77949, + #286790); +#286828 = PRESENTATION_STYLE_ASSIGNMENT((#286829)); +#286829 = SURFACE_STYLE_USAGE(.BOTH.,#286830); +#286830 = SURFACE_SIDE_STYLE('',(#286831)); +#286831 = SURFACE_STYLE_FILL_AREA(#286832); +#286832 = FILL_AREA_STYLE('',(#286833)); +#286833 = FILL_AREA_STYLE_COLOUR('',#285989); +#286834 = OVER_RIDING_STYLED_ITEM('overriding color',(#286835),#77973, + #286790); +#286835 = PRESENTATION_STYLE_ASSIGNMENT((#286836)); +#286836 = SURFACE_STYLE_USAGE(.BOTH.,#286837); +#286837 = SURFACE_SIDE_STYLE('',(#286838)); +#286838 = SURFACE_STYLE_FILL_AREA(#286839); +#286839 = FILL_AREA_STYLE('',(#286840)); +#286840 = FILL_AREA_STYLE_COLOUR('',#285989); +#286841 = OVER_RIDING_STYLED_ITEM('overriding color',(#286842),#77997, + #286790); +#286842 = PRESENTATION_STYLE_ASSIGNMENT((#286843)); +#286843 = SURFACE_STYLE_USAGE(.BOTH.,#286844); +#286844 = SURFACE_SIDE_STYLE('',(#286845)); +#286845 = SURFACE_STYLE_FILL_AREA(#286846); +#286846 = FILL_AREA_STYLE('',(#286847)); +#286847 = FILL_AREA_STYLE_COLOUR('',#285989); +#286848 = OVER_RIDING_STYLED_ITEM('overriding color',(#286849),#78014, + #286790); +#286849 = PRESENTATION_STYLE_ASSIGNMENT((#286850)); +#286850 = SURFACE_STYLE_USAGE(.BOTH.,#286851); +#286851 = SURFACE_SIDE_STYLE('',(#286852)); +#286852 = SURFACE_STYLE_FILL_AREA(#286853); +#286853 = FILL_AREA_STYLE('',(#286854)); +#286854 = FILL_AREA_STYLE_COLOUR('',#285989); +#286855 = STYLED_ITEM('color',(#286856),#78028); +#286856 = PRESENTATION_STYLE_ASSIGNMENT((#286857,#286862)); +#286857 = SURFACE_STYLE_USAGE(.BOTH.,#286858); +#286858 = SURFACE_SIDE_STYLE('',(#286859)); +#286859 = SURFACE_STYLE_FILL_AREA(#286860); +#286860 = FILL_AREA_STYLE('',(#286861)); +#286861 = FILL_AREA_STYLE_COLOUR('',#281104); +#286862 = CURVE_STYLE('',#286863,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286864 = OVER_RIDING_STYLED_ITEM('overriding color',(#286865),#78030, + #286855); +#286865 = PRESENTATION_STYLE_ASSIGNMENT((#286866)); +#286866 = SURFACE_STYLE_USAGE(.BOTH.,#286867); +#286867 = SURFACE_SIDE_STYLE('',(#286868)); +#286868 = SURFACE_STYLE_FILL_AREA(#286869); +#286869 = FILL_AREA_STYLE('',(#286870)); +#286870 = FILL_AREA_STYLE_COLOUR('',#285989); +#286871 = OVER_RIDING_STYLED_ITEM('overriding color',(#286872),#78086, + #286855); +#286872 = PRESENTATION_STYLE_ASSIGNMENT((#286873)); +#286873 = SURFACE_STYLE_USAGE(.BOTH.,#286874); +#286874 = SURFACE_SIDE_STYLE('',(#286875)); +#286875 = SURFACE_STYLE_FILL_AREA(#286876); +#286876 = FILL_AREA_STYLE('',(#286877)); +#286877 = FILL_AREA_STYLE_COLOUR('',#285989); +#286878 = OVER_RIDING_STYLED_ITEM('overriding color',(#286879),#78117, + #286855); +#286879 = PRESENTATION_STYLE_ASSIGNMENT((#286880)); +#286880 = SURFACE_STYLE_USAGE(.BOTH.,#286881); +#286881 = SURFACE_SIDE_STYLE('',(#286882)); +#286882 = SURFACE_STYLE_FILL_AREA(#286883); +#286883 = FILL_AREA_STYLE('',(#286884)); +#286884 = FILL_AREA_STYLE_COLOUR('',#285989); +#286885 = OVER_RIDING_STYLED_ITEM('overriding color',(#286886),#78141, + #286855); +#286886 = PRESENTATION_STYLE_ASSIGNMENT((#286887)); +#286887 = SURFACE_STYLE_USAGE(.BOTH.,#286888); +#286888 = SURFACE_SIDE_STYLE('',(#286889)); +#286889 = SURFACE_STYLE_FILL_AREA(#286890); +#286890 = FILL_AREA_STYLE('',(#286891)); +#286891 = FILL_AREA_STYLE_COLOUR('',#285989); +#286892 = OVER_RIDING_STYLED_ITEM('overriding color',(#286893),#78165, + #286855); +#286893 = PRESENTATION_STYLE_ASSIGNMENT((#286894)); +#286894 = SURFACE_STYLE_USAGE(.BOTH.,#286895); +#286895 = SURFACE_SIDE_STYLE('',(#286896)); +#286896 = SURFACE_STYLE_FILL_AREA(#286897); +#286897 = FILL_AREA_STYLE('',(#286898)); +#286898 = FILL_AREA_STYLE_COLOUR('',#285989); +#286899 = OVER_RIDING_STYLED_ITEM('overriding color',(#286900),#78189, + #286855); +#286900 = PRESENTATION_STYLE_ASSIGNMENT((#286901)); +#286901 = SURFACE_STYLE_USAGE(.BOTH.,#286902); +#286902 = SURFACE_SIDE_STYLE('',(#286903)); +#286903 = SURFACE_STYLE_FILL_AREA(#286904); +#286904 = FILL_AREA_STYLE('',(#286905)); +#286905 = FILL_AREA_STYLE_COLOUR('',#285989); +#286906 = OVER_RIDING_STYLED_ITEM('overriding color',(#286907),#78213, + #286855); +#286907 = PRESENTATION_STYLE_ASSIGNMENT((#286908)); +#286908 = SURFACE_STYLE_USAGE(.BOTH.,#286909); +#286909 = SURFACE_SIDE_STYLE('',(#286910)); +#286910 = SURFACE_STYLE_FILL_AREA(#286911); +#286911 = FILL_AREA_STYLE('',(#286912)); +#286912 = FILL_AREA_STYLE_COLOUR('',#285989); +#286913 = OVER_RIDING_STYLED_ITEM('overriding color',(#286914),#78230, + #286855); +#286914 = PRESENTATION_STYLE_ASSIGNMENT((#286915)); +#286915 = SURFACE_STYLE_USAGE(.BOTH.,#286916); +#286916 = SURFACE_SIDE_STYLE('',(#286917)); +#286917 = SURFACE_STYLE_FILL_AREA(#286918); +#286918 = FILL_AREA_STYLE('',(#286919)); +#286919 = FILL_AREA_STYLE_COLOUR('',#285989); +#286920 = STYLED_ITEM('color',(#286921),#78244); +#286921 = PRESENTATION_STYLE_ASSIGNMENT((#286922,#286927)); +#286922 = SURFACE_STYLE_USAGE(.BOTH.,#286923); +#286923 = SURFACE_SIDE_STYLE('',(#286924)); +#286924 = SURFACE_STYLE_FILL_AREA(#286925); +#286925 = FILL_AREA_STYLE('',(#286926)); +#286926 = FILL_AREA_STYLE_COLOUR('',#281104); +#286927 = CURVE_STYLE('',#286928,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286928 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286929 = OVER_RIDING_STYLED_ITEM('overriding color',(#286930),#78246, + #286920); +#286930 = PRESENTATION_STYLE_ASSIGNMENT((#286931)); +#286931 = SURFACE_STYLE_USAGE(.BOTH.,#286932); +#286932 = SURFACE_SIDE_STYLE('',(#286933)); +#286933 = SURFACE_STYLE_FILL_AREA(#286934); +#286934 = FILL_AREA_STYLE('',(#286935)); +#286935 = FILL_AREA_STYLE_COLOUR('',#285989); +#286936 = OVER_RIDING_STYLED_ITEM('overriding color',(#286937),#78302, + #286920); +#286937 = PRESENTATION_STYLE_ASSIGNMENT((#286938)); +#286938 = SURFACE_STYLE_USAGE(.BOTH.,#286939); +#286939 = SURFACE_SIDE_STYLE('',(#286940)); +#286940 = SURFACE_STYLE_FILL_AREA(#286941); +#286941 = FILL_AREA_STYLE('',(#286942)); +#286942 = FILL_AREA_STYLE_COLOUR('',#285989); +#286943 = OVER_RIDING_STYLED_ITEM('overriding color',(#286944),#78333, + #286920); +#286944 = PRESENTATION_STYLE_ASSIGNMENT((#286945)); +#286945 = SURFACE_STYLE_USAGE(.BOTH.,#286946); +#286946 = SURFACE_SIDE_STYLE('',(#286947)); +#286947 = SURFACE_STYLE_FILL_AREA(#286948); +#286948 = FILL_AREA_STYLE('',(#286949)); +#286949 = FILL_AREA_STYLE_COLOUR('',#285989); +#286950 = OVER_RIDING_STYLED_ITEM('overriding color',(#286951),#78357, + #286920); +#286951 = PRESENTATION_STYLE_ASSIGNMENT((#286952)); +#286952 = SURFACE_STYLE_USAGE(.BOTH.,#286953); +#286953 = SURFACE_SIDE_STYLE('',(#286954)); +#286954 = SURFACE_STYLE_FILL_AREA(#286955); +#286955 = FILL_AREA_STYLE('',(#286956)); +#286956 = FILL_AREA_STYLE_COLOUR('',#285989); +#286957 = OVER_RIDING_STYLED_ITEM('overriding color',(#286958),#78381, + #286920); +#286958 = PRESENTATION_STYLE_ASSIGNMENT((#286959)); +#286959 = SURFACE_STYLE_USAGE(.BOTH.,#286960); +#286960 = SURFACE_SIDE_STYLE('',(#286961)); +#286961 = SURFACE_STYLE_FILL_AREA(#286962); +#286962 = FILL_AREA_STYLE('',(#286963)); +#286963 = FILL_AREA_STYLE_COLOUR('',#285989); +#286964 = OVER_RIDING_STYLED_ITEM('overriding color',(#286965),#78405, + #286920); +#286965 = PRESENTATION_STYLE_ASSIGNMENT((#286966)); +#286966 = SURFACE_STYLE_USAGE(.BOTH.,#286967); +#286967 = SURFACE_SIDE_STYLE('',(#286968)); +#286968 = SURFACE_STYLE_FILL_AREA(#286969); +#286969 = FILL_AREA_STYLE('',(#286970)); +#286970 = FILL_AREA_STYLE_COLOUR('',#285989); +#286971 = OVER_RIDING_STYLED_ITEM('overriding color',(#286972),#78429, + #286920); +#286972 = PRESENTATION_STYLE_ASSIGNMENT((#286973)); +#286973 = SURFACE_STYLE_USAGE(.BOTH.,#286974); +#286974 = SURFACE_SIDE_STYLE('',(#286975)); +#286975 = SURFACE_STYLE_FILL_AREA(#286976); +#286976 = FILL_AREA_STYLE('',(#286977)); +#286977 = FILL_AREA_STYLE_COLOUR('',#285989); +#286978 = OVER_RIDING_STYLED_ITEM('overriding color',(#286979),#78446, + #286920); +#286979 = PRESENTATION_STYLE_ASSIGNMENT((#286980)); +#286980 = SURFACE_STYLE_USAGE(.BOTH.,#286981); +#286981 = SURFACE_SIDE_STYLE('',(#286982)); +#286982 = SURFACE_STYLE_FILL_AREA(#286983); +#286983 = FILL_AREA_STYLE('',(#286984)); +#286984 = FILL_AREA_STYLE_COLOUR('',#285989); +#286985 = STYLED_ITEM('color',(#286986),#78460); +#286986 = PRESENTATION_STYLE_ASSIGNMENT((#286987,#286992)); +#286987 = SURFACE_STYLE_USAGE(.BOTH.,#286988); +#286988 = SURFACE_SIDE_STYLE('',(#286989)); +#286989 = SURFACE_STYLE_FILL_AREA(#286990); +#286990 = FILL_AREA_STYLE('',(#286991)); +#286991 = FILL_AREA_STYLE_COLOUR('',#281104); +#286992 = CURVE_STYLE('',#286993,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#286993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#286994 = OVER_RIDING_STYLED_ITEM('overriding color',(#286995),#78462, + #286985); +#286995 = PRESENTATION_STYLE_ASSIGNMENT((#286996)); +#286996 = SURFACE_STYLE_USAGE(.BOTH.,#286997); +#286997 = SURFACE_SIDE_STYLE('',(#286998)); +#286998 = SURFACE_STYLE_FILL_AREA(#286999); +#286999 = FILL_AREA_STYLE('',(#287000)); +#287000 = FILL_AREA_STYLE_COLOUR('',#285989); +#287001 = OVER_RIDING_STYLED_ITEM('overriding color',(#287002),#78518, + #286985); +#287002 = PRESENTATION_STYLE_ASSIGNMENT((#287003)); +#287003 = SURFACE_STYLE_USAGE(.BOTH.,#287004); +#287004 = SURFACE_SIDE_STYLE('',(#287005)); +#287005 = SURFACE_STYLE_FILL_AREA(#287006); +#287006 = FILL_AREA_STYLE('',(#287007)); +#287007 = FILL_AREA_STYLE_COLOUR('',#285989); +#287008 = OVER_RIDING_STYLED_ITEM('overriding color',(#287009),#78549, + #286985); +#287009 = PRESENTATION_STYLE_ASSIGNMENT((#287010)); +#287010 = SURFACE_STYLE_USAGE(.BOTH.,#287011); +#287011 = SURFACE_SIDE_STYLE('',(#287012)); +#287012 = SURFACE_STYLE_FILL_AREA(#287013); +#287013 = FILL_AREA_STYLE('',(#287014)); +#287014 = FILL_AREA_STYLE_COLOUR('',#285989); +#287015 = OVER_RIDING_STYLED_ITEM('overriding color',(#287016),#78573, + #286985); +#287016 = PRESENTATION_STYLE_ASSIGNMENT((#287017)); +#287017 = SURFACE_STYLE_USAGE(.BOTH.,#287018); +#287018 = SURFACE_SIDE_STYLE('',(#287019)); +#287019 = SURFACE_STYLE_FILL_AREA(#287020); +#287020 = FILL_AREA_STYLE('',(#287021)); +#287021 = FILL_AREA_STYLE_COLOUR('',#285989); +#287022 = OVER_RIDING_STYLED_ITEM('overriding color',(#287023),#78597, + #286985); +#287023 = PRESENTATION_STYLE_ASSIGNMENT((#287024)); +#287024 = SURFACE_STYLE_USAGE(.BOTH.,#287025); +#287025 = SURFACE_SIDE_STYLE('',(#287026)); +#287026 = SURFACE_STYLE_FILL_AREA(#287027); +#287027 = FILL_AREA_STYLE('',(#287028)); +#287028 = FILL_AREA_STYLE_COLOUR('',#285989); +#287029 = OVER_RIDING_STYLED_ITEM('overriding color',(#287030),#78621, + #286985); +#287030 = PRESENTATION_STYLE_ASSIGNMENT((#287031)); +#287031 = SURFACE_STYLE_USAGE(.BOTH.,#287032); +#287032 = SURFACE_SIDE_STYLE('',(#287033)); +#287033 = SURFACE_STYLE_FILL_AREA(#287034); +#287034 = FILL_AREA_STYLE('',(#287035)); +#287035 = FILL_AREA_STYLE_COLOUR('',#285989); +#287036 = OVER_RIDING_STYLED_ITEM('overriding color',(#287037),#78645, + #286985); +#287037 = PRESENTATION_STYLE_ASSIGNMENT((#287038)); +#287038 = SURFACE_STYLE_USAGE(.BOTH.,#287039); +#287039 = SURFACE_SIDE_STYLE('',(#287040)); +#287040 = SURFACE_STYLE_FILL_AREA(#287041); +#287041 = FILL_AREA_STYLE('',(#287042)); +#287042 = FILL_AREA_STYLE_COLOUR('',#285989); +#287043 = OVER_RIDING_STYLED_ITEM('overriding color',(#287044),#78662, + #286985); +#287044 = PRESENTATION_STYLE_ASSIGNMENT((#287045)); +#287045 = SURFACE_STYLE_USAGE(.BOTH.,#287046); +#287046 = SURFACE_SIDE_STYLE('',(#287047)); +#287047 = SURFACE_STYLE_FILL_AREA(#287048); +#287048 = FILL_AREA_STYLE('',(#287049)); +#287049 = FILL_AREA_STYLE_COLOUR('',#285989); +#287050 = STYLED_ITEM('color',(#287051),#78676); +#287051 = PRESENTATION_STYLE_ASSIGNMENT((#287052,#287057)); +#287052 = SURFACE_STYLE_USAGE(.BOTH.,#287053); +#287053 = SURFACE_SIDE_STYLE('',(#287054)); +#287054 = SURFACE_STYLE_FILL_AREA(#287055); +#287055 = FILL_AREA_STYLE('',(#287056)); +#287056 = FILL_AREA_STYLE_COLOUR('',#281104); +#287057 = CURVE_STYLE('',#287058,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287058 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287059 = OVER_RIDING_STYLED_ITEM('overriding color',(#287060),#78678, + #287050); +#287060 = PRESENTATION_STYLE_ASSIGNMENT((#287061)); +#287061 = SURFACE_STYLE_USAGE(.BOTH.,#287062); +#287062 = SURFACE_SIDE_STYLE('',(#287063)); +#287063 = SURFACE_STYLE_FILL_AREA(#287064); +#287064 = FILL_AREA_STYLE('',(#287065)); +#287065 = FILL_AREA_STYLE_COLOUR('',#285989); +#287066 = OVER_RIDING_STYLED_ITEM('overriding color',(#287067),#78734, + #287050); +#287067 = PRESENTATION_STYLE_ASSIGNMENT((#287068)); +#287068 = SURFACE_STYLE_USAGE(.BOTH.,#287069); +#287069 = SURFACE_SIDE_STYLE('',(#287070)); +#287070 = SURFACE_STYLE_FILL_AREA(#287071); +#287071 = FILL_AREA_STYLE('',(#287072)); +#287072 = FILL_AREA_STYLE_COLOUR('',#285989); +#287073 = OVER_RIDING_STYLED_ITEM('overriding color',(#287074),#78765, + #287050); +#287074 = PRESENTATION_STYLE_ASSIGNMENT((#287075)); +#287075 = SURFACE_STYLE_USAGE(.BOTH.,#287076); +#287076 = SURFACE_SIDE_STYLE('',(#287077)); +#287077 = SURFACE_STYLE_FILL_AREA(#287078); +#287078 = FILL_AREA_STYLE('',(#287079)); +#287079 = FILL_AREA_STYLE_COLOUR('',#285989); +#287080 = OVER_RIDING_STYLED_ITEM('overriding color',(#287081),#78789, + #287050); +#287081 = PRESENTATION_STYLE_ASSIGNMENT((#287082)); +#287082 = SURFACE_STYLE_USAGE(.BOTH.,#287083); +#287083 = SURFACE_SIDE_STYLE('',(#287084)); +#287084 = SURFACE_STYLE_FILL_AREA(#287085); +#287085 = FILL_AREA_STYLE('',(#287086)); +#287086 = FILL_AREA_STYLE_COLOUR('',#285989); +#287087 = OVER_RIDING_STYLED_ITEM('overriding color',(#287088),#78813, + #287050); +#287088 = PRESENTATION_STYLE_ASSIGNMENT((#287089)); +#287089 = SURFACE_STYLE_USAGE(.BOTH.,#287090); +#287090 = SURFACE_SIDE_STYLE('',(#287091)); +#287091 = SURFACE_STYLE_FILL_AREA(#287092); +#287092 = FILL_AREA_STYLE('',(#287093)); +#287093 = FILL_AREA_STYLE_COLOUR('',#285989); +#287094 = OVER_RIDING_STYLED_ITEM('overriding color',(#287095),#78837, + #287050); +#287095 = PRESENTATION_STYLE_ASSIGNMENT((#287096)); +#287096 = SURFACE_STYLE_USAGE(.BOTH.,#287097); +#287097 = SURFACE_SIDE_STYLE('',(#287098)); +#287098 = SURFACE_STYLE_FILL_AREA(#287099); +#287099 = FILL_AREA_STYLE('',(#287100)); +#287100 = FILL_AREA_STYLE_COLOUR('',#285989); +#287101 = OVER_RIDING_STYLED_ITEM('overriding color',(#287102),#78861, + #287050); +#287102 = PRESENTATION_STYLE_ASSIGNMENT((#287103)); +#287103 = SURFACE_STYLE_USAGE(.BOTH.,#287104); +#287104 = SURFACE_SIDE_STYLE('',(#287105)); +#287105 = SURFACE_STYLE_FILL_AREA(#287106); +#287106 = FILL_AREA_STYLE('',(#287107)); +#287107 = FILL_AREA_STYLE_COLOUR('',#285989); +#287108 = OVER_RIDING_STYLED_ITEM('overriding color',(#287109),#78878, + #287050); +#287109 = PRESENTATION_STYLE_ASSIGNMENT((#287110)); +#287110 = SURFACE_STYLE_USAGE(.BOTH.,#287111); +#287111 = SURFACE_SIDE_STYLE('',(#287112)); +#287112 = SURFACE_STYLE_FILL_AREA(#287113); +#287113 = FILL_AREA_STYLE('',(#287114)); +#287114 = FILL_AREA_STYLE_COLOUR('',#285989); +#287115 = STYLED_ITEM('color',(#287116),#78892); +#287116 = PRESENTATION_STYLE_ASSIGNMENT((#287117,#287122)); +#287117 = SURFACE_STYLE_USAGE(.BOTH.,#287118); +#287118 = SURFACE_SIDE_STYLE('',(#287119)); +#287119 = SURFACE_STYLE_FILL_AREA(#287120); +#287120 = FILL_AREA_STYLE('',(#287121)); +#287121 = FILL_AREA_STYLE_COLOUR('',#281104); +#287122 = CURVE_STYLE('',#287123,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287123 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287124 = OVER_RIDING_STYLED_ITEM('overriding color',(#287125),#78894, + #287115); +#287125 = PRESENTATION_STYLE_ASSIGNMENT((#287126)); +#287126 = SURFACE_STYLE_USAGE(.BOTH.,#287127); +#287127 = SURFACE_SIDE_STYLE('',(#287128)); +#287128 = SURFACE_STYLE_FILL_AREA(#287129); +#287129 = FILL_AREA_STYLE('',(#287130)); +#287130 = FILL_AREA_STYLE_COLOUR('',#285989); +#287131 = OVER_RIDING_STYLED_ITEM('overriding color',(#287132),#78950, + #287115); +#287132 = PRESENTATION_STYLE_ASSIGNMENT((#287133)); +#287133 = SURFACE_STYLE_USAGE(.BOTH.,#287134); +#287134 = SURFACE_SIDE_STYLE('',(#287135)); +#287135 = SURFACE_STYLE_FILL_AREA(#287136); +#287136 = FILL_AREA_STYLE('',(#287137)); +#287137 = FILL_AREA_STYLE_COLOUR('',#285989); +#287138 = OVER_RIDING_STYLED_ITEM('overriding color',(#287139),#78981, + #287115); +#287139 = PRESENTATION_STYLE_ASSIGNMENT((#287140)); +#287140 = SURFACE_STYLE_USAGE(.BOTH.,#287141); +#287141 = SURFACE_SIDE_STYLE('',(#287142)); +#287142 = SURFACE_STYLE_FILL_AREA(#287143); +#287143 = FILL_AREA_STYLE('',(#287144)); +#287144 = FILL_AREA_STYLE_COLOUR('',#285989); +#287145 = OVER_RIDING_STYLED_ITEM('overriding color',(#287146),#79005, + #287115); +#287146 = PRESENTATION_STYLE_ASSIGNMENT((#287147)); +#287147 = SURFACE_STYLE_USAGE(.BOTH.,#287148); +#287148 = SURFACE_SIDE_STYLE('',(#287149)); +#287149 = SURFACE_STYLE_FILL_AREA(#287150); +#287150 = FILL_AREA_STYLE('',(#287151)); +#287151 = FILL_AREA_STYLE_COLOUR('',#285989); +#287152 = OVER_RIDING_STYLED_ITEM('overriding color',(#287153),#79029, + #287115); +#287153 = PRESENTATION_STYLE_ASSIGNMENT((#287154)); +#287154 = SURFACE_STYLE_USAGE(.BOTH.,#287155); +#287155 = SURFACE_SIDE_STYLE('',(#287156)); +#287156 = SURFACE_STYLE_FILL_AREA(#287157); +#287157 = FILL_AREA_STYLE('',(#287158)); +#287158 = FILL_AREA_STYLE_COLOUR('',#285989); +#287159 = OVER_RIDING_STYLED_ITEM('overriding color',(#287160),#79053, + #287115); +#287160 = PRESENTATION_STYLE_ASSIGNMENT((#287161)); +#287161 = SURFACE_STYLE_USAGE(.BOTH.,#287162); +#287162 = SURFACE_SIDE_STYLE('',(#287163)); +#287163 = SURFACE_STYLE_FILL_AREA(#287164); +#287164 = FILL_AREA_STYLE('',(#287165)); +#287165 = FILL_AREA_STYLE_COLOUR('',#285989); +#287166 = OVER_RIDING_STYLED_ITEM('overriding color',(#287167),#79077, + #287115); +#287167 = PRESENTATION_STYLE_ASSIGNMENT((#287168)); +#287168 = SURFACE_STYLE_USAGE(.BOTH.,#287169); +#287169 = SURFACE_SIDE_STYLE('',(#287170)); +#287170 = SURFACE_STYLE_FILL_AREA(#287171); +#287171 = FILL_AREA_STYLE('',(#287172)); +#287172 = FILL_AREA_STYLE_COLOUR('',#285989); +#287173 = OVER_RIDING_STYLED_ITEM('overriding color',(#287174),#79094, + #287115); +#287174 = PRESENTATION_STYLE_ASSIGNMENT((#287175)); +#287175 = SURFACE_STYLE_USAGE(.BOTH.,#287176); +#287176 = SURFACE_SIDE_STYLE('',(#287177)); +#287177 = SURFACE_STYLE_FILL_AREA(#287178); +#287178 = FILL_AREA_STYLE('',(#287179)); +#287179 = FILL_AREA_STYLE_COLOUR('',#285989); +#287180 = STYLED_ITEM('color',(#287181),#79108); +#287181 = PRESENTATION_STYLE_ASSIGNMENT((#287182,#287187)); +#287182 = SURFACE_STYLE_USAGE(.BOTH.,#287183); +#287183 = SURFACE_SIDE_STYLE('',(#287184)); +#287184 = SURFACE_STYLE_FILL_AREA(#287185); +#287185 = FILL_AREA_STYLE('',(#287186)); +#287186 = FILL_AREA_STYLE_COLOUR('',#281104); +#287187 = CURVE_STYLE('',#287188,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287188 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287189 = OVER_RIDING_STYLED_ITEM('overriding color',(#287190),#79110, + #287180); +#287190 = PRESENTATION_STYLE_ASSIGNMENT((#287191)); +#287191 = SURFACE_STYLE_USAGE(.BOTH.,#287192); +#287192 = SURFACE_SIDE_STYLE('',(#287193)); +#287193 = SURFACE_STYLE_FILL_AREA(#287194); +#287194 = FILL_AREA_STYLE('',(#287195)); +#287195 = FILL_AREA_STYLE_COLOUR('',#285989); +#287196 = OVER_RIDING_STYLED_ITEM('overriding color',(#287197),#79166, + #287180); +#287197 = PRESENTATION_STYLE_ASSIGNMENT((#287198)); +#287198 = SURFACE_STYLE_USAGE(.BOTH.,#287199); +#287199 = SURFACE_SIDE_STYLE('',(#287200)); +#287200 = SURFACE_STYLE_FILL_AREA(#287201); +#287201 = FILL_AREA_STYLE('',(#287202)); +#287202 = FILL_AREA_STYLE_COLOUR('',#285989); +#287203 = OVER_RIDING_STYLED_ITEM('overriding color',(#287204),#79197, + #287180); +#287204 = PRESENTATION_STYLE_ASSIGNMENT((#287205)); +#287205 = SURFACE_STYLE_USAGE(.BOTH.,#287206); +#287206 = SURFACE_SIDE_STYLE('',(#287207)); +#287207 = SURFACE_STYLE_FILL_AREA(#287208); +#287208 = FILL_AREA_STYLE('',(#287209)); +#287209 = FILL_AREA_STYLE_COLOUR('',#285989); +#287210 = OVER_RIDING_STYLED_ITEM('overriding color',(#287211),#79221, + #287180); +#287211 = PRESENTATION_STYLE_ASSIGNMENT((#287212)); +#287212 = SURFACE_STYLE_USAGE(.BOTH.,#287213); +#287213 = SURFACE_SIDE_STYLE('',(#287214)); +#287214 = SURFACE_STYLE_FILL_AREA(#287215); +#287215 = FILL_AREA_STYLE('',(#287216)); +#287216 = FILL_AREA_STYLE_COLOUR('',#285989); +#287217 = OVER_RIDING_STYLED_ITEM('overriding color',(#287218),#79245, + #287180); +#287218 = PRESENTATION_STYLE_ASSIGNMENT((#287219)); +#287219 = SURFACE_STYLE_USAGE(.BOTH.,#287220); +#287220 = SURFACE_SIDE_STYLE('',(#287221)); +#287221 = SURFACE_STYLE_FILL_AREA(#287222); +#287222 = FILL_AREA_STYLE('',(#287223)); +#287223 = FILL_AREA_STYLE_COLOUR('',#285989); +#287224 = OVER_RIDING_STYLED_ITEM('overriding color',(#287225),#79269, + #287180); +#287225 = PRESENTATION_STYLE_ASSIGNMENT((#287226)); +#287226 = SURFACE_STYLE_USAGE(.BOTH.,#287227); +#287227 = SURFACE_SIDE_STYLE('',(#287228)); +#287228 = SURFACE_STYLE_FILL_AREA(#287229); +#287229 = FILL_AREA_STYLE('',(#287230)); +#287230 = FILL_AREA_STYLE_COLOUR('',#285989); +#287231 = OVER_RIDING_STYLED_ITEM('overriding color',(#287232),#79293, + #287180); +#287232 = PRESENTATION_STYLE_ASSIGNMENT((#287233)); +#287233 = SURFACE_STYLE_USAGE(.BOTH.,#287234); +#287234 = SURFACE_SIDE_STYLE('',(#287235)); +#287235 = SURFACE_STYLE_FILL_AREA(#287236); +#287236 = FILL_AREA_STYLE('',(#287237)); +#287237 = FILL_AREA_STYLE_COLOUR('',#285989); +#287238 = OVER_RIDING_STYLED_ITEM('overriding color',(#287239),#79310, + #287180); +#287239 = PRESENTATION_STYLE_ASSIGNMENT((#287240)); +#287240 = SURFACE_STYLE_USAGE(.BOTH.,#287241); +#287241 = SURFACE_SIDE_STYLE('',(#287242)); +#287242 = SURFACE_STYLE_FILL_AREA(#287243); +#287243 = FILL_AREA_STYLE('',(#287244)); +#287244 = FILL_AREA_STYLE_COLOUR('',#285989); +#287245 = STYLED_ITEM('color',(#287246),#79324); +#287246 = PRESENTATION_STYLE_ASSIGNMENT((#287247,#287252)); +#287247 = SURFACE_STYLE_USAGE(.BOTH.,#287248); +#287248 = SURFACE_SIDE_STYLE('',(#287249)); +#287249 = SURFACE_STYLE_FILL_AREA(#287250); +#287250 = FILL_AREA_STYLE('',(#287251)); +#287251 = FILL_AREA_STYLE_COLOUR('',#281104); +#287252 = CURVE_STYLE('',#287253,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287254 = OVER_RIDING_STYLED_ITEM('overriding color',(#287255),#79326, + #287245); +#287255 = PRESENTATION_STYLE_ASSIGNMENT((#287256)); +#287256 = SURFACE_STYLE_USAGE(.BOTH.,#287257); +#287257 = SURFACE_SIDE_STYLE('',(#287258)); +#287258 = SURFACE_STYLE_FILL_AREA(#287259); +#287259 = FILL_AREA_STYLE('',(#287260)); +#287260 = FILL_AREA_STYLE_COLOUR('',#285989); +#287261 = OVER_RIDING_STYLED_ITEM('overriding color',(#287262),#79382, + #287245); +#287262 = PRESENTATION_STYLE_ASSIGNMENT((#287263)); +#287263 = SURFACE_STYLE_USAGE(.BOTH.,#287264); +#287264 = SURFACE_SIDE_STYLE('',(#287265)); +#287265 = SURFACE_STYLE_FILL_AREA(#287266); +#287266 = FILL_AREA_STYLE('',(#287267)); +#287267 = FILL_AREA_STYLE_COLOUR('',#285989); +#287268 = OVER_RIDING_STYLED_ITEM('overriding color',(#287269),#79413, + #287245); +#287269 = PRESENTATION_STYLE_ASSIGNMENT((#287270)); +#287270 = SURFACE_STYLE_USAGE(.BOTH.,#287271); +#287271 = SURFACE_SIDE_STYLE('',(#287272)); +#287272 = SURFACE_STYLE_FILL_AREA(#287273); +#287273 = FILL_AREA_STYLE('',(#287274)); +#287274 = FILL_AREA_STYLE_COLOUR('',#285989); +#287275 = OVER_RIDING_STYLED_ITEM('overriding color',(#287276),#79437, + #287245); +#287276 = PRESENTATION_STYLE_ASSIGNMENT((#287277)); +#287277 = SURFACE_STYLE_USAGE(.BOTH.,#287278); +#287278 = SURFACE_SIDE_STYLE('',(#287279)); +#287279 = SURFACE_STYLE_FILL_AREA(#287280); +#287280 = FILL_AREA_STYLE('',(#287281)); +#287281 = FILL_AREA_STYLE_COLOUR('',#285989); +#287282 = OVER_RIDING_STYLED_ITEM('overriding color',(#287283),#79461, + #287245); +#287283 = PRESENTATION_STYLE_ASSIGNMENT((#287284)); +#287284 = SURFACE_STYLE_USAGE(.BOTH.,#287285); +#287285 = SURFACE_SIDE_STYLE('',(#287286)); +#287286 = SURFACE_STYLE_FILL_AREA(#287287); +#287287 = FILL_AREA_STYLE('',(#287288)); +#287288 = FILL_AREA_STYLE_COLOUR('',#285989); +#287289 = OVER_RIDING_STYLED_ITEM('overriding color',(#287290),#79485, + #287245); +#287290 = PRESENTATION_STYLE_ASSIGNMENT((#287291)); +#287291 = SURFACE_STYLE_USAGE(.BOTH.,#287292); +#287292 = SURFACE_SIDE_STYLE('',(#287293)); +#287293 = SURFACE_STYLE_FILL_AREA(#287294); +#287294 = FILL_AREA_STYLE('',(#287295)); +#287295 = FILL_AREA_STYLE_COLOUR('',#285989); +#287296 = OVER_RIDING_STYLED_ITEM('overriding color',(#287297),#79509, + #287245); +#287297 = PRESENTATION_STYLE_ASSIGNMENT((#287298)); +#287298 = SURFACE_STYLE_USAGE(.BOTH.,#287299); +#287299 = SURFACE_SIDE_STYLE('',(#287300)); +#287300 = SURFACE_STYLE_FILL_AREA(#287301); +#287301 = FILL_AREA_STYLE('',(#287302)); +#287302 = FILL_AREA_STYLE_COLOUR('',#285989); +#287303 = OVER_RIDING_STYLED_ITEM('overriding color',(#287304),#79526, + #287245); +#287304 = PRESENTATION_STYLE_ASSIGNMENT((#287305)); +#287305 = SURFACE_STYLE_USAGE(.BOTH.,#287306); +#287306 = SURFACE_SIDE_STYLE('',(#287307)); +#287307 = SURFACE_STYLE_FILL_AREA(#287308); +#287308 = FILL_AREA_STYLE('',(#287309)); +#287309 = FILL_AREA_STYLE_COLOUR('',#285989); +#287310 = STYLED_ITEM('color',(#287311),#79540); +#287311 = PRESENTATION_STYLE_ASSIGNMENT((#287312,#287317)); +#287312 = SURFACE_STYLE_USAGE(.BOTH.,#287313); +#287313 = SURFACE_SIDE_STYLE('',(#287314)); +#287314 = SURFACE_STYLE_FILL_AREA(#287315); +#287315 = FILL_AREA_STYLE('',(#287316)); +#287316 = FILL_AREA_STYLE_COLOUR('',#281104); +#287317 = CURVE_STYLE('',#287318,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287319 = OVER_RIDING_STYLED_ITEM('overriding color',(#287320),#79542, + #287310); +#287320 = PRESENTATION_STYLE_ASSIGNMENT((#287321)); +#287321 = SURFACE_STYLE_USAGE(.BOTH.,#287322); +#287322 = SURFACE_SIDE_STYLE('',(#287323)); +#287323 = SURFACE_STYLE_FILL_AREA(#287324); +#287324 = FILL_AREA_STYLE('',(#287325)); +#287325 = FILL_AREA_STYLE_COLOUR('',#285989); +#287326 = OVER_RIDING_STYLED_ITEM('overriding color',(#287327),#79598, + #287310); +#287327 = PRESENTATION_STYLE_ASSIGNMENT((#287328)); +#287328 = SURFACE_STYLE_USAGE(.BOTH.,#287329); +#287329 = SURFACE_SIDE_STYLE('',(#287330)); +#287330 = SURFACE_STYLE_FILL_AREA(#287331); +#287331 = FILL_AREA_STYLE('',(#287332)); +#287332 = FILL_AREA_STYLE_COLOUR('',#285989); +#287333 = OVER_RIDING_STYLED_ITEM('overriding color',(#287334),#79629, + #287310); +#287334 = PRESENTATION_STYLE_ASSIGNMENT((#287335)); +#287335 = SURFACE_STYLE_USAGE(.BOTH.,#287336); +#287336 = SURFACE_SIDE_STYLE('',(#287337)); +#287337 = SURFACE_STYLE_FILL_AREA(#287338); +#287338 = FILL_AREA_STYLE('',(#287339)); +#287339 = FILL_AREA_STYLE_COLOUR('',#285989); +#287340 = OVER_RIDING_STYLED_ITEM('overriding color',(#287341),#79653, + #287310); +#287341 = PRESENTATION_STYLE_ASSIGNMENT((#287342)); +#287342 = SURFACE_STYLE_USAGE(.BOTH.,#287343); +#287343 = SURFACE_SIDE_STYLE('',(#287344)); +#287344 = SURFACE_STYLE_FILL_AREA(#287345); +#287345 = FILL_AREA_STYLE('',(#287346)); +#287346 = FILL_AREA_STYLE_COLOUR('',#285989); +#287347 = OVER_RIDING_STYLED_ITEM('overriding color',(#287348),#79677, + #287310); +#287348 = PRESENTATION_STYLE_ASSIGNMENT((#287349)); +#287349 = SURFACE_STYLE_USAGE(.BOTH.,#287350); +#287350 = SURFACE_SIDE_STYLE('',(#287351)); +#287351 = SURFACE_STYLE_FILL_AREA(#287352); +#287352 = FILL_AREA_STYLE('',(#287353)); +#287353 = FILL_AREA_STYLE_COLOUR('',#285989); +#287354 = OVER_RIDING_STYLED_ITEM('overriding color',(#287355),#79701, + #287310); +#287355 = PRESENTATION_STYLE_ASSIGNMENT((#287356)); +#287356 = SURFACE_STYLE_USAGE(.BOTH.,#287357); +#287357 = SURFACE_SIDE_STYLE('',(#287358)); +#287358 = SURFACE_STYLE_FILL_AREA(#287359); +#287359 = FILL_AREA_STYLE('',(#287360)); +#287360 = FILL_AREA_STYLE_COLOUR('',#285989); +#287361 = OVER_RIDING_STYLED_ITEM('overriding color',(#287362),#79725, + #287310); +#287362 = PRESENTATION_STYLE_ASSIGNMENT((#287363)); +#287363 = SURFACE_STYLE_USAGE(.BOTH.,#287364); +#287364 = SURFACE_SIDE_STYLE('',(#287365)); +#287365 = SURFACE_STYLE_FILL_AREA(#287366); +#287366 = FILL_AREA_STYLE('',(#287367)); +#287367 = FILL_AREA_STYLE_COLOUR('',#285989); +#287368 = OVER_RIDING_STYLED_ITEM('overriding color',(#287369),#79742, + #287310); +#287369 = PRESENTATION_STYLE_ASSIGNMENT((#287370)); +#287370 = SURFACE_STYLE_USAGE(.BOTH.,#287371); +#287371 = SURFACE_SIDE_STYLE('',(#287372)); +#287372 = SURFACE_STYLE_FILL_AREA(#287373); +#287373 = FILL_AREA_STYLE('',(#287374)); +#287374 = FILL_AREA_STYLE_COLOUR('',#285989); +#287375 = STYLED_ITEM('color',(#287376),#79756); +#287376 = PRESENTATION_STYLE_ASSIGNMENT((#287377,#287382)); +#287377 = SURFACE_STYLE_USAGE(.BOTH.,#287378); +#287378 = SURFACE_SIDE_STYLE('',(#287379)); +#287379 = SURFACE_STYLE_FILL_AREA(#287380); +#287380 = FILL_AREA_STYLE('',(#287381)); +#287381 = FILL_AREA_STYLE_COLOUR('',#281104); +#287382 = CURVE_STYLE('',#287383,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287383 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287384 = OVER_RIDING_STYLED_ITEM('overriding color',(#287385),#79758, + #287375); +#287385 = PRESENTATION_STYLE_ASSIGNMENT((#287386)); +#287386 = SURFACE_STYLE_USAGE(.BOTH.,#287387); +#287387 = SURFACE_SIDE_STYLE('',(#287388)); +#287388 = SURFACE_STYLE_FILL_AREA(#287389); +#287389 = FILL_AREA_STYLE('',(#287390)); +#287390 = FILL_AREA_STYLE_COLOUR('',#285989); +#287391 = OVER_RIDING_STYLED_ITEM('overriding color',(#287392),#79814, + #287375); +#287392 = PRESENTATION_STYLE_ASSIGNMENT((#287393)); +#287393 = SURFACE_STYLE_USAGE(.BOTH.,#287394); +#287394 = SURFACE_SIDE_STYLE('',(#287395)); +#287395 = SURFACE_STYLE_FILL_AREA(#287396); +#287396 = FILL_AREA_STYLE('',(#287397)); +#287397 = FILL_AREA_STYLE_COLOUR('',#285989); +#287398 = OVER_RIDING_STYLED_ITEM('overriding color',(#287399),#79845, + #287375); +#287399 = PRESENTATION_STYLE_ASSIGNMENT((#287400)); +#287400 = SURFACE_STYLE_USAGE(.BOTH.,#287401); +#287401 = SURFACE_SIDE_STYLE('',(#287402)); +#287402 = SURFACE_STYLE_FILL_AREA(#287403); +#287403 = FILL_AREA_STYLE('',(#287404)); +#287404 = FILL_AREA_STYLE_COLOUR('',#285989); +#287405 = OVER_RIDING_STYLED_ITEM('overriding color',(#287406),#79869, + #287375); +#287406 = PRESENTATION_STYLE_ASSIGNMENT((#287407)); +#287407 = SURFACE_STYLE_USAGE(.BOTH.,#287408); +#287408 = SURFACE_SIDE_STYLE('',(#287409)); +#287409 = SURFACE_STYLE_FILL_AREA(#287410); +#287410 = FILL_AREA_STYLE('',(#287411)); +#287411 = FILL_AREA_STYLE_COLOUR('',#285989); +#287412 = OVER_RIDING_STYLED_ITEM('overriding color',(#287413),#79893, + #287375); +#287413 = PRESENTATION_STYLE_ASSIGNMENT((#287414)); +#287414 = SURFACE_STYLE_USAGE(.BOTH.,#287415); +#287415 = SURFACE_SIDE_STYLE('',(#287416)); +#287416 = SURFACE_STYLE_FILL_AREA(#287417); +#287417 = FILL_AREA_STYLE('',(#287418)); +#287418 = FILL_AREA_STYLE_COLOUR('',#285989); +#287419 = OVER_RIDING_STYLED_ITEM('overriding color',(#287420),#79917, + #287375); +#287420 = PRESENTATION_STYLE_ASSIGNMENT((#287421)); +#287421 = SURFACE_STYLE_USAGE(.BOTH.,#287422); +#287422 = SURFACE_SIDE_STYLE('',(#287423)); +#287423 = SURFACE_STYLE_FILL_AREA(#287424); +#287424 = FILL_AREA_STYLE('',(#287425)); +#287425 = FILL_AREA_STYLE_COLOUR('',#285989); +#287426 = OVER_RIDING_STYLED_ITEM('overriding color',(#287427),#79941, + #287375); +#287427 = PRESENTATION_STYLE_ASSIGNMENT((#287428)); +#287428 = SURFACE_STYLE_USAGE(.BOTH.,#287429); +#287429 = SURFACE_SIDE_STYLE('',(#287430)); +#287430 = SURFACE_STYLE_FILL_AREA(#287431); +#287431 = FILL_AREA_STYLE('',(#287432)); +#287432 = FILL_AREA_STYLE_COLOUR('',#285989); +#287433 = OVER_RIDING_STYLED_ITEM('overriding color',(#287434),#79958, + #287375); +#287434 = PRESENTATION_STYLE_ASSIGNMENT((#287435)); +#287435 = SURFACE_STYLE_USAGE(.BOTH.,#287436); +#287436 = SURFACE_SIDE_STYLE('',(#287437)); +#287437 = SURFACE_STYLE_FILL_AREA(#287438); +#287438 = FILL_AREA_STYLE('',(#287439)); +#287439 = FILL_AREA_STYLE_COLOUR('',#285989); +#287440 = STYLED_ITEM('color',(#287441),#79972); +#287441 = PRESENTATION_STYLE_ASSIGNMENT((#287442,#287447)); +#287442 = SURFACE_STYLE_USAGE(.BOTH.,#287443); +#287443 = SURFACE_SIDE_STYLE('',(#287444)); +#287444 = SURFACE_STYLE_FILL_AREA(#287445); +#287445 = FILL_AREA_STYLE('',(#287446)); +#287446 = FILL_AREA_STYLE_COLOUR('',#281104); +#287447 = CURVE_STYLE('',#287448,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287449 = OVER_RIDING_STYLED_ITEM('overriding color',(#287450),#79974, + #287440); +#287450 = PRESENTATION_STYLE_ASSIGNMENT((#287451)); +#287451 = SURFACE_STYLE_USAGE(.BOTH.,#287452); +#287452 = SURFACE_SIDE_STYLE('',(#287453)); +#287453 = SURFACE_STYLE_FILL_AREA(#287454); +#287454 = FILL_AREA_STYLE('',(#287455)); +#287455 = FILL_AREA_STYLE_COLOUR('',#285989); +#287456 = OVER_RIDING_STYLED_ITEM('overriding color',(#287457),#80030, + #287440); +#287457 = PRESENTATION_STYLE_ASSIGNMENT((#287458)); +#287458 = SURFACE_STYLE_USAGE(.BOTH.,#287459); +#287459 = SURFACE_SIDE_STYLE('',(#287460)); +#287460 = SURFACE_STYLE_FILL_AREA(#287461); +#287461 = FILL_AREA_STYLE('',(#287462)); +#287462 = FILL_AREA_STYLE_COLOUR('',#285989); +#287463 = OVER_RIDING_STYLED_ITEM('overriding color',(#287464),#80061, + #287440); +#287464 = PRESENTATION_STYLE_ASSIGNMENT((#287465)); +#287465 = SURFACE_STYLE_USAGE(.BOTH.,#287466); +#287466 = SURFACE_SIDE_STYLE('',(#287467)); +#287467 = SURFACE_STYLE_FILL_AREA(#287468); +#287468 = FILL_AREA_STYLE('',(#287469)); +#287469 = FILL_AREA_STYLE_COLOUR('',#285989); +#287470 = OVER_RIDING_STYLED_ITEM('overriding color',(#287471),#80085, + #287440); +#287471 = PRESENTATION_STYLE_ASSIGNMENT((#287472)); +#287472 = SURFACE_STYLE_USAGE(.BOTH.,#287473); +#287473 = SURFACE_SIDE_STYLE('',(#287474)); +#287474 = SURFACE_STYLE_FILL_AREA(#287475); +#287475 = FILL_AREA_STYLE('',(#287476)); +#287476 = FILL_AREA_STYLE_COLOUR('',#285989); +#287477 = OVER_RIDING_STYLED_ITEM('overriding color',(#287478),#80109, + #287440); +#287478 = PRESENTATION_STYLE_ASSIGNMENT((#287479)); +#287479 = SURFACE_STYLE_USAGE(.BOTH.,#287480); +#287480 = SURFACE_SIDE_STYLE('',(#287481)); +#287481 = SURFACE_STYLE_FILL_AREA(#287482); +#287482 = FILL_AREA_STYLE('',(#287483)); +#287483 = FILL_AREA_STYLE_COLOUR('',#285989); +#287484 = OVER_RIDING_STYLED_ITEM('overriding color',(#287485),#80133, + #287440); +#287485 = PRESENTATION_STYLE_ASSIGNMENT((#287486)); +#287486 = SURFACE_STYLE_USAGE(.BOTH.,#287487); +#287487 = SURFACE_SIDE_STYLE('',(#287488)); +#287488 = SURFACE_STYLE_FILL_AREA(#287489); +#287489 = FILL_AREA_STYLE('',(#287490)); +#287490 = FILL_AREA_STYLE_COLOUR('',#285989); +#287491 = OVER_RIDING_STYLED_ITEM('overriding color',(#287492),#80157, + #287440); +#287492 = PRESENTATION_STYLE_ASSIGNMENT((#287493)); +#287493 = SURFACE_STYLE_USAGE(.BOTH.,#287494); +#287494 = SURFACE_SIDE_STYLE('',(#287495)); +#287495 = SURFACE_STYLE_FILL_AREA(#287496); +#287496 = FILL_AREA_STYLE('',(#287497)); +#287497 = FILL_AREA_STYLE_COLOUR('',#285989); +#287498 = OVER_RIDING_STYLED_ITEM('overriding color',(#287499),#80174, + #287440); +#287499 = PRESENTATION_STYLE_ASSIGNMENT((#287500)); +#287500 = SURFACE_STYLE_USAGE(.BOTH.,#287501); +#287501 = SURFACE_SIDE_STYLE('',(#287502)); +#287502 = SURFACE_STYLE_FILL_AREA(#287503); +#287503 = FILL_AREA_STYLE('',(#287504)); +#287504 = FILL_AREA_STYLE_COLOUR('',#285989); +#287505 = STYLED_ITEM('color',(#287506),#80188); +#287506 = PRESENTATION_STYLE_ASSIGNMENT((#287507,#287512)); +#287507 = SURFACE_STYLE_USAGE(.BOTH.,#287508); +#287508 = SURFACE_SIDE_STYLE('',(#287509)); +#287509 = SURFACE_STYLE_FILL_AREA(#287510); +#287510 = FILL_AREA_STYLE('',(#287511)); +#287511 = FILL_AREA_STYLE_COLOUR('',#281104); +#287512 = CURVE_STYLE('',#287513,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287513 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287514 = OVER_RIDING_STYLED_ITEM('overriding color',(#287515),#80190, + #287505); +#287515 = PRESENTATION_STYLE_ASSIGNMENT((#287516)); +#287516 = SURFACE_STYLE_USAGE(.BOTH.,#287517); +#287517 = SURFACE_SIDE_STYLE('',(#287518)); +#287518 = SURFACE_STYLE_FILL_AREA(#287519); +#287519 = FILL_AREA_STYLE('',(#287520)); +#287520 = FILL_AREA_STYLE_COLOUR('',#285989); +#287521 = OVER_RIDING_STYLED_ITEM('overriding color',(#287522),#80246, + #287505); +#287522 = PRESENTATION_STYLE_ASSIGNMENT((#287523)); +#287523 = SURFACE_STYLE_USAGE(.BOTH.,#287524); +#287524 = SURFACE_SIDE_STYLE('',(#287525)); +#287525 = SURFACE_STYLE_FILL_AREA(#287526); +#287526 = FILL_AREA_STYLE('',(#287527)); +#287527 = FILL_AREA_STYLE_COLOUR('',#285989); +#287528 = OVER_RIDING_STYLED_ITEM('overriding color',(#287529),#80277, + #287505); +#287529 = PRESENTATION_STYLE_ASSIGNMENT((#287530)); +#287530 = SURFACE_STYLE_USAGE(.BOTH.,#287531); +#287531 = SURFACE_SIDE_STYLE('',(#287532)); +#287532 = SURFACE_STYLE_FILL_AREA(#287533); +#287533 = FILL_AREA_STYLE('',(#287534)); +#287534 = FILL_AREA_STYLE_COLOUR('',#285989); +#287535 = OVER_RIDING_STYLED_ITEM('overriding color',(#287536),#80301, + #287505); +#287536 = PRESENTATION_STYLE_ASSIGNMENT((#287537)); +#287537 = SURFACE_STYLE_USAGE(.BOTH.,#287538); +#287538 = SURFACE_SIDE_STYLE('',(#287539)); +#287539 = SURFACE_STYLE_FILL_AREA(#287540); +#287540 = FILL_AREA_STYLE('',(#287541)); +#287541 = FILL_AREA_STYLE_COLOUR('',#285989); +#287542 = OVER_RIDING_STYLED_ITEM('overriding color',(#287543),#80325, + #287505); +#287543 = PRESENTATION_STYLE_ASSIGNMENT((#287544)); +#287544 = SURFACE_STYLE_USAGE(.BOTH.,#287545); +#287545 = SURFACE_SIDE_STYLE('',(#287546)); +#287546 = SURFACE_STYLE_FILL_AREA(#287547); +#287547 = FILL_AREA_STYLE('',(#287548)); +#287548 = FILL_AREA_STYLE_COLOUR('',#285989); +#287549 = OVER_RIDING_STYLED_ITEM('overriding color',(#287550),#80349, + #287505); +#287550 = PRESENTATION_STYLE_ASSIGNMENT((#287551)); +#287551 = SURFACE_STYLE_USAGE(.BOTH.,#287552); +#287552 = SURFACE_SIDE_STYLE('',(#287553)); +#287553 = SURFACE_STYLE_FILL_AREA(#287554); +#287554 = FILL_AREA_STYLE('',(#287555)); +#287555 = FILL_AREA_STYLE_COLOUR('',#285989); +#287556 = OVER_RIDING_STYLED_ITEM('overriding color',(#287557),#80373, + #287505); +#287557 = PRESENTATION_STYLE_ASSIGNMENT((#287558)); +#287558 = SURFACE_STYLE_USAGE(.BOTH.,#287559); +#287559 = SURFACE_SIDE_STYLE('',(#287560)); +#287560 = SURFACE_STYLE_FILL_AREA(#287561); +#287561 = FILL_AREA_STYLE('',(#287562)); +#287562 = FILL_AREA_STYLE_COLOUR('',#285989); +#287563 = OVER_RIDING_STYLED_ITEM('overriding color',(#287564),#80390, + #287505); +#287564 = PRESENTATION_STYLE_ASSIGNMENT((#287565)); +#287565 = SURFACE_STYLE_USAGE(.BOTH.,#287566); +#287566 = SURFACE_SIDE_STYLE('',(#287567)); +#287567 = SURFACE_STYLE_FILL_AREA(#287568); +#287568 = FILL_AREA_STYLE('',(#287569)); +#287569 = FILL_AREA_STYLE_COLOUR('',#285989); +#287570 = STYLED_ITEM('color',(#287571),#80404); +#287571 = PRESENTATION_STYLE_ASSIGNMENT((#287572,#287577)); +#287572 = SURFACE_STYLE_USAGE(.BOTH.,#287573); +#287573 = SURFACE_SIDE_STYLE('',(#287574)); +#287574 = SURFACE_STYLE_FILL_AREA(#287575); +#287575 = FILL_AREA_STYLE('',(#287576)); +#287576 = FILL_AREA_STYLE_COLOUR('',#281104); +#287577 = CURVE_STYLE('',#287578,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287579 = OVER_RIDING_STYLED_ITEM('overriding color',(#287580),#80406, + #287570); +#287580 = PRESENTATION_STYLE_ASSIGNMENT((#287581)); +#287581 = SURFACE_STYLE_USAGE(.BOTH.,#287582); +#287582 = SURFACE_SIDE_STYLE('',(#287583)); +#287583 = SURFACE_STYLE_FILL_AREA(#287584); +#287584 = FILL_AREA_STYLE('',(#287585)); +#287585 = FILL_AREA_STYLE_COLOUR('',#285989); +#287586 = OVER_RIDING_STYLED_ITEM('overriding color',(#287587),#80462, + #287570); +#287587 = PRESENTATION_STYLE_ASSIGNMENT((#287588)); +#287588 = SURFACE_STYLE_USAGE(.BOTH.,#287589); +#287589 = SURFACE_SIDE_STYLE('',(#287590)); +#287590 = SURFACE_STYLE_FILL_AREA(#287591); +#287591 = FILL_AREA_STYLE('',(#287592)); +#287592 = FILL_AREA_STYLE_COLOUR('',#285989); +#287593 = OVER_RIDING_STYLED_ITEM('overriding color',(#287594),#80493, + #287570); +#287594 = PRESENTATION_STYLE_ASSIGNMENT((#287595)); +#287595 = SURFACE_STYLE_USAGE(.BOTH.,#287596); +#287596 = SURFACE_SIDE_STYLE('',(#287597)); +#287597 = SURFACE_STYLE_FILL_AREA(#287598); +#287598 = FILL_AREA_STYLE('',(#287599)); +#287599 = FILL_AREA_STYLE_COLOUR('',#285989); +#287600 = OVER_RIDING_STYLED_ITEM('overriding color',(#287601),#80517, + #287570); +#287601 = PRESENTATION_STYLE_ASSIGNMENT((#287602)); +#287602 = SURFACE_STYLE_USAGE(.BOTH.,#287603); +#287603 = SURFACE_SIDE_STYLE('',(#287604)); +#287604 = SURFACE_STYLE_FILL_AREA(#287605); +#287605 = FILL_AREA_STYLE('',(#287606)); +#287606 = FILL_AREA_STYLE_COLOUR('',#285989); +#287607 = OVER_RIDING_STYLED_ITEM('overriding color',(#287608),#80541, + #287570); +#287608 = PRESENTATION_STYLE_ASSIGNMENT((#287609)); +#287609 = SURFACE_STYLE_USAGE(.BOTH.,#287610); +#287610 = SURFACE_SIDE_STYLE('',(#287611)); +#287611 = SURFACE_STYLE_FILL_AREA(#287612); +#287612 = FILL_AREA_STYLE('',(#287613)); +#287613 = FILL_AREA_STYLE_COLOUR('',#285989); +#287614 = OVER_RIDING_STYLED_ITEM('overriding color',(#287615),#80565, + #287570); +#287615 = PRESENTATION_STYLE_ASSIGNMENT((#287616)); +#287616 = SURFACE_STYLE_USAGE(.BOTH.,#287617); +#287617 = SURFACE_SIDE_STYLE('',(#287618)); +#287618 = SURFACE_STYLE_FILL_AREA(#287619); +#287619 = FILL_AREA_STYLE('',(#287620)); +#287620 = FILL_AREA_STYLE_COLOUR('',#285989); +#287621 = OVER_RIDING_STYLED_ITEM('overriding color',(#287622),#80589, + #287570); +#287622 = PRESENTATION_STYLE_ASSIGNMENT((#287623)); +#287623 = SURFACE_STYLE_USAGE(.BOTH.,#287624); +#287624 = SURFACE_SIDE_STYLE('',(#287625)); +#287625 = SURFACE_STYLE_FILL_AREA(#287626); +#287626 = FILL_AREA_STYLE('',(#287627)); +#287627 = FILL_AREA_STYLE_COLOUR('',#285989); +#287628 = OVER_RIDING_STYLED_ITEM('overriding color',(#287629),#80606, + #287570); +#287629 = PRESENTATION_STYLE_ASSIGNMENT((#287630)); +#287630 = SURFACE_STYLE_USAGE(.BOTH.,#287631); +#287631 = SURFACE_SIDE_STYLE('',(#287632)); +#287632 = SURFACE_STYLE_FILL_AREA(#287633); +#287633 = FILL_AREA_STYLE('',(#287634)); +#287634 = FILL_AREA_STYLE_COLOUR('',#285989); +#287635 = STYLED_ITEM('color',(#287636),#80620); +#287636 = PRESENTATION_STYLE_ASSIGNMENT((#287637,#287642)); +#287637 = SURFACE_STYLE_USAGE(.BOTH.,#287638); +#287638 = SURFACE_SIDE_STYLE('',(#287639)); +#287639 = SURFACE_STYLE_FILL_AREA(#287640); +#287640 = FILL_AREA_STYLE('',(#287641)); +#287641 = FILL_AREA_STYLE_COLOUR('',#281104); +#287642 = CURVE_STYLE('',#287643,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287644 = OVER_RIDING_STYLED_ITEM('overriding color',(#287645),#80622, + #287635); +#287645 = PRESENTATION_STYLE_ASSIGNMENT((#287646)); +#287646 = SURFACE_STYLE_USAGE(.BOTH.,#287647); +#287647 = SURFACE_SIDE_STYLE('',(#287648)); +#287648 = SURFACE_STYLE_FILL_AREA(#287649); +#287649 = FILL_AREA_STYLE('',(#287650)); +#287650 = FILL_AREA_STYLE_COLOUR('',#285989); +#287651 = OVER_RIDING_STYLED_ITEM('overriding color',(#287652),#80678, + #287635); +#287652 = PRESENTATION_STYLE_ASSIGNMENT((#287653)); +#287653 = SURFACE_STYLE_USAGE(.BOTH.,#287654); +#287654 = SURFACE_SIDE_STYLE('',(#287655)); +#287655 = SURFACE_STYLE_FILL_AREA(#287656); +#287656 = FILL_AREA_STYLE('',(#287657)); +#287657 = FILL_AREA_STYLE_COLOUR('',#285989); +#287658 = OVER_RIDING_STYLED_ITEM('overriding color',(#287659),#80709, + #287635); +#287659 = PRESENTATION_STYLE_ASSIGNMENT((#287660)); +#287660 = SURFACE_STYLE_USAGE(.BOTH.,#287661); +#287661 = SURFACE_SIDE_STYLE('',(#287662)); +#287662 = SURFACE_STYLE_FILL_AREA(#287663); +#287663 = FILL_AREA_STYLE('',(#287664)); +#287664 = FILL_AREA_STYLE_COLOUR('',#285989); +#287665 = OVER_RIDING_STYLED_ITEM('overriding color',(#287666),#80733, + #287635); +#287666 = PRESENTATION_STYLE_ASSIGNMENT((#287667)); +#287667 = SURFACE_STYLE_USAGE(.BOTH.,#287668); +#287668 = SURFACE_SIDE_STYLE('',(#287669)); +#287669 = SURFACE_STYLE_FILL_AREA(#287670); +#287670 = FILL_AREA_STYLE('',(#287671)); +#287671 = FILL_AREA_STYLE_COLOUR('',#285989); +#287672 = OVER_RIDING_STYLED_ITEM('overriding color',(#287673),#80757, + #287635); +#287673 = PRESENTATION_STYLE_ASSIGNMENT((#287674)); +#287674 = SURFACE_STYLE_USAGE(.BOTH.,#287675); +#287675 = SURFACE_SIDE_STYLE('',(#287676)); +#287676 = SURFACE_STYLE_FILL_AREA(#287677); +#287677 = FILL_AREA_STYLE('',(#287678)); +#287678 = FILL_AREA_STYLE_COLOUR('',#285989); +#287679 = OVER_RIDING_STYLED_ITEM('overriding color',(#287680),#80781, + #287635); +#287680 = PRESENTATION_STYLE_ASSIGNMENT((#287681)); +#287681 = SURFACE_STYLE_USAGE(.BOTH.,#287682); +#287682 = SURFACE_SIDE_STYLE('',(#287683)); +#287683 = SURFACE_STYLE_FILL_AREA(#287684); +#287684 = FILL_AREA_STYLE('',(#287685)); +#287685 = FILL_AREA_STYLE_COLOUR('',#285989); +#287686 = OVER_RIDING_STYLED_ITEM('overriding color',(#287687),#80805, + #287635); +#287687 = PRESENTATION_STYLE_ASSIGNMENT((#287688)); +#287688 = SURFACE_STYLE_USAGE(.BOTH.,#287689); +#287689 = SURFACE_SIDE_STYLE('',(#287690)); +#287690 = SURFACE_STYLE_FILL_AREA(#287691); +#287691 = FILL_AREA_STYLE('',(#287692)); +#287692 = FILL_AREA_STYLE_COLOUR('',#285989); +#287693 = OVER_RIDING_STYLED_ITEM('overriding color',(#287694),#80822, + #287635); +#287694 = PRESENTATION_STYLE_ASSIGNMENT((#287695)); +#287695 = SURFACE_STYLE_USAGE(.BOTH.,#287696); +#287696 = SURFACE_SIDE_STYLE('',(#287697)); +#287697 = SURFACE_STYLE_FILL_AREA(#287698); +#287698 = FILL_AREA_STYLE('',(#287699)); +#287699 = FILL_AREA_STYLE_COLOUR('',#285989); +#287700 = STYLED_ITEM('color',(#287701),#80836); +#287701 = PRESENTATION_STYLE_ASSIGNMENT((#287702,#287707)); +#287702 = SURFACE_STYLE_USAGE(.BOTH.,#287703); +#287703 = SURFACE_SIDE_STYLE('',(#287704)); +#287704 = SURFACE_STYLE_FILL_AREA(#287705); +#287705 = FILL_AREA_STYLE('',(#287706)); +#287706 = FILL_AREA_STYLE_COLOUR('',#281104); +#287707 = CURVE_STYLE('',#287708,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287708 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287709 = OVER_RIDING_STYLED_ITEM('overriding color',(#287710),#80838, + #287700); +#287710 = PRESENTATION_STYLE_ASSIGNMENT((#287711)); +#287711 = SURFACE_STYLE_USAGE(.BOTH.,#287712); +#287712 = SURFACE_SIDE_STYLE('',(#287713)); +#287713 = SURFACE_STYLE_FILL_AREA(#287714); +#287714 = FILL_AREA_STYLE('',(#287715)); +#287715 = FILL_AREA_STYLE_COLOUR('',#285989); +#287716 = OVER_RIDING_STYLED_ITEM('overriding color',(#287717),#80894, + #287700); +#287717 = PRESENTATION_STYLE_ASSIGNMENT((#287718)); +#287718 = SURFACE_STYLE_USAGE(.BOTH.,#287719); +#287719 = SURFACE_SIDE_STYLE('',(#287720)); +#287720 = SURFACE_STYLE_FILL_AREA(#287721); +#287721 = FILL_AREA_STYLE('',(#287722)); +#287722 = FILL_AREA_STYLE_COLOUR('',#285989); +#287723 = OVER_RIDING_STYLED_ITEM('overriding color',(#287724),#80925, + #287700); +#287724 = PRESENTATION_STYLE_ASSIGNMENT((#287725)); +#287725 = SURFACE_STYLE_USAGE(.BOTH.,#287726); +#287726 = SURFACE_SIDE_STYLE('',(#287727)); +#287727 = SURFACE_STYLE_FILL_AREA(#287728); +#287728 = FILL_AREA_STYLE('',(#287729)); +#287729 = FILL_AREA_STYLE_COLOUR('',#285989); +#287730 = OVER_RIDING_STYLED_ITEM('overriding color',(#287731),#80949, + #287700); +#287731 = PRESENTATION_STYLE_ASSIGNMENT((#287732)); +#287732 = SURFACE_STYLE_USAGE(.BOTH.,#287733); +#287733 = SURFACE_SIDE_STYLE('',(#287734)); +#287734 = SURFACE_STYLE_FILL_AREA(#287735); +#287735 = FILL_AREA_STYLE('',(#287736)); +#287736 = FILL_AREA_STYLE_COLOUR('',#285989); +#287737 = OVER_RIDING_STYLED_ITEM('overriding color',(#287738),#80973, + #287700); +#287738 = PRESENTATION_STYLE_ASSIGNMENT((#287739)); +#287739 = SURFACE_STYLE_USAGE(.BOTH.,#287740); +#287740 = SURFACE_SIDE_STYLE('',(#287741)); +#287741 = SURFACE_STYLE_FILL_AREA(#287742); +#287742 = FILL_AREA_STYLE('',(#287743)); +#287743 = FILL_AREA_STYLE_COLOUR('',#285989); +#287744 = OVER_RIDING_STYLED_ITEM('overriding color',(#287745),#80997, + #287700); +#287745 = PRESENTATION_STYLE_ASSIGNMENT((#287746)); +#287746 = SURFACE_STYLE_USAGE(.BOTH.,#287747); +#287747 = SURFACE_SIDE_STYLE('',(#287748)); +#287748 = SURFACE_STYLE_FILL_AREA(#287749); +#287749 = FILL_AREA_STYLE('',(#287750)); +#287750 = FILL_AREA_STYLE_COLOUR('',#285989); +#287751 = OVER_RIDING_STYLED_ITEM('overriding color',(#287752),#81021, + #287700); +#287752 = PRESENTATION_STYLE_ASSIGNMENT((#287753)); +#287753 = SURFACE_STYLE_USAGE(.BOTH.,#287754); +#287754 = SURFACE_SIDE_STYLE('',(#287755)); +#287755 = SURFACE_STYLE_FILL_AREA(#287756); +#287756 = FILL_AREA_STYLE('',(#287757)); +#287757 = FILL_AREA_STYLE_COLOUR('',#285989); +#287758 = OVER_RIDING_STYLED_ITEM('overriding color',(#287759),#81038, + #287700); +#287759 = PRESENTATION_STYLE_ASSIGNMENT((#287760)); +#287760 = SURFACE_STYLE_USAGE(.BOTH.,#287761); +#287761 = SURFACE_SIDE_STYLE('',(#287762)); +#287762 = SURFACE_STYLE_FILL_AREA(#287763); +#287763 = FILL_AREA_STYLE('',(#287764)); +#287764 = FILL_AREA_STYLE_COLOUR('',#285989); +#287765 = STYLED_ITEM('color',(#287766),#81052); +#287766 = PRESENTATION_STYLE_ASSIGNMENT((#287767,#287772)); +#287767 = SURFACE_STYLE_USAGE(.BOTH.,#287768); +#287768 = SURFACE_SIDE_STYLE('',(#287769)); +#287769 = SURFACE_STYLE_FILL_AREA(#287770); +#287770 = FILL_AREA_STYLE('',(#287771)); +#287771 = FILL_AREA_STYLE_COLOUR('',#281104); +#287772 = CURVE_STYLE('',#287773,POSITIVE_LENGTH_MEASURE(0.1),#281107); +#287773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287774 = OVER_RIDING_STYLED_ITEM('overriding color',(#287775),#81054, + #287765); +#287775 = PRESENTATION_STYLE_ASSIGNMENT((#287776)); +#287776 = SURFACE_STYLE_USAGE(.BOTH.,#287777); +#287777 = SURFACE_SIDE_STYLE('',(#287778)); +#287778 = SURFACE_STYLE_FILL_AREA(#287779); +#287779 = FILL_AREA_STYLE('',(#287780)); +#287780 = FILL_AREA_STYLE_COLOUR('',#285989); +#287781 = OVER_RIDING_STYLED_ITEM('overriding color',(#287782),#81110, + #287765); +#287782 = PRESENTATION_STYLE_ASSIGNMENT((#287783)); +#287783 = SURFACE_STYLE_USAGE(.BOTH.,#287784); +#287784 = SURFACE_SIDE_STYLE('',(#287785)); +#287785 = SURFACE_STYLE_FILL_AREA(#287786); +#287786 = FILL_AREA_STYLE('',(#287787)); +#287787 = FILL_AREA_STYLE_COLOUR('',#285989); +#287788 = OVER_RIDING_STYLED_ITEM('overriding color',(#287789),#81141, + #287765); +#287789 = PRESENTATION_STYLE_ASSIGNMENT((#287790)); +#287790 = SURFACE_STYLE_USAGE(.BOTH.,#287791); +#287791 = SURFACE_SIDE_STYLE('',(#287792)); +#287792 = SURFACE_STYLE_FILL_AREA(#287793); +#287793 = FILL_AREA_STYLE('',(#287794)); +#287794 = FILL_AREA_STYLE_COLOUR('',#285989); +#287795 = OVER_RIDING_STYLED_ITEM('overriding color',(#287796),#81165, + #287765); +#287796 = PRESENTATION_STYLE_ASSIGNMENT((#287797)); +#287797 = SURFACE_STYLE_USAGE(.BOTH.,#287798); +#287798 = SURFACE_SIDE_STYLE('',(#287799)); +#287799 = SURFACE_STYLE_FILL_AREA(#287800); +#287800 = FILL_AREA_STYLE('',(#287801)); +#287801 = FILL_AREA_STYLE_COLOUR('',#285989); +#287802 = OVER_RIDING_STYLED_ITEM('overriding color',(#287803),#81189, + #287765); +#287803 = PRESENTATION_STYLE_ASSIGNMENT((#287804)); +#287804 = SURFACE_STYLE_USAGE(.BOTH.,#287805); +#287805 = SURFACE_SIDE_STYLE('',(#287806)); +#287806 = SURFACE_STYLE_FILL_AREA(#287807); +#287807 = FILL_AREA_STYLE('',(#287808)); +#287808 = FILL_AREA_STYLE_COLOUR('',#285989); +#287809 = OVER_RIDING_STYLED_ITEM('overriding color',(#287810),#81213, + #287765); +#287810 = PRESENTATION_STYLE_ASSIGNMENT((#287811)); +#287811 = SURFACE_STYLE_USAGE(.BOTH.,#287812); +#287812 = SURFACE_SIDE_STYLE('',(#287813)); +#287813 = SURFACE_STYLE_FILL_AREA(#287814); +#287814 = FILL_AREA_STYLE('',(#287815)); +#287815 = FILL_AREA_STYLE_COLOUR('',#285989); +#287816 = OVER_RIDING_STYLED_ITEM('overriding color',(#287817),#81237, + #287765); +#287817 = PRESENTATION_STYLE_ASSIGNMENT((#287818)); +#287818 = SURFACE_STYLE_USAGE(.BOTH.,#287819); +#287819 = SURFACE_SIDE_STYLE('',(#287820)); +#287820 = SURFACE_STYLE_FILL_AREA(#287821); +#287821 = FILL_AREA_STYLE('',(#287822)); +#287822 = FILL_AREA_STYLE_COLOUR('',#285989); +#287823 = OVER_RIDING_STYLED_ITEM('overriding color',(#287824),#81254, + #287765); +#287824 = PRESENTATION_STYLE_ASSIGNMENT((#287825)); +#287825 = SURFACE_STYLE_USAGE(.BOTH.,#287826); +#287826 = SURFACE_SIDE_STYLE('',(#287827)); +#287827 = SURFACE_STYLE_FILL_AREA(#287828); +#287828 = FILL_AREA_STYLE('',(#287829)); +#287829 = FILL_AREA_STYLE_COLOUR('',#285989); +#287830 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #287831,#287840,#287849,#287858,#287867,#287876,#287885,#287894, + #287903,#287912,#287921,#287930,#287939,#287948,#287957,#287966, + #287975,#287984,#287993,#288002,#288011,#288020,#288029,#288038, + #288047,#288056,#288065,#288074,#288083,#288092,#288101,#288110, + #288119,#288128,#288137,#288146,#288155,#288164,#288173,#288182, + #288191,#288200,#288209,#288218,#288227,#288236,#288245,#288254, + #288263,#288272,#288281,#288290,#288299,#288308,#288317,#288326, + #288335,#288344,#288353,#288362,#288371,#288380,#288389,#288398, + #288407,#288416,#288425,#288434,#288443,#288452,#288461,#288470, + #288479,#288488,#288497,#288506,#288515,#288524,#288533,#288542, + #288551,#288560,#288569,#288578,#288587,#288596,#288605,#288614, + #288623,#288632,#288641,#288650,#288659,#288668,#288677,#288686, + #288695,#288704,#288713,#288722,#288731,#288740,#288749,#288758, + #288767,#288776,#288785,#288794,#288803,#288812,#288821,#288830, + #288839,#288848,#288857,#288866,#288875,#288884,#288893,#288902, + #288911,#288920,#288929,#288938,#288947,#288956,#288965,#288974, + #288983,#288992,#289001,#289010,#289019,#289028,#289037,#289046, + #289055,#289064,#289073,#289082,#289091,#289100,#289109,#289118, + #289127,#289136,#289145,#289154,#289163,#289172,#289181,#289190, + #289199,#289208,#289217,#289226,#289235,#289244,#289253,#289262, + #289271,#289280,#289289,#289298,#289307,#289316,#289325,#289334, + #289343,#289352,#289361,#289370,#289379,#289388,#289397,#289406, + #289415,#289424,#289433,#289442,#289451,#289460,#289469,#289478, + #289487,#289496,#289505,#289514,#289523,#289532,#289541,#289550, + #289559,#289568,#289577,#289586,#289595,#289604,#289613,#289622, + #289631,#289640,#289649,#289658,#289667,#289676,#289685,#289694, + #289703,#289712,#289721,#289730,#289739,#289748,#289757,#289766, + #289775,#289784,#289793,#289802,#289811,#289820,#289829,#289838, + #289847,#289856,#289865,#289874,#289883,#289892,#289901,#289910, + #289919,#289928,#289937,#289946,#289955,#289964,#289973,#289982, + #289991,#290000,#290009,#290018,#290027,#290036,#290045,#290054, + #290063,#290072,#290081,#290090,#290099,#290108,#290117,#290126, + #290135,#290144,#290153,#290162,#290171,#290180,#290189,#290198, + #290207,#290216,#290225,#290234,#290243,#290252,#290261,#290270, + #290279,#290288,#290297,#290306,#290315,#290324,#290333,#290342, + #290351,#290360,#290369,#290378,#290387,#290396,#290405,#290414, + #290423,#290432,#290441,#290450,#290459,#290468,#290477,#290486, + #290495,#290504,#290513,#290522,#290531,#290540,#290549,#290558, + #290567,#290576,#290585,#290594,#290603,#290612,#290621,#290630, + #290639,#290648,#290657,#290666,#290675,#290684,#290693,#290702, + #290711,#290720,#290729,#290738,#290747,#290756,#290765,#290774, + #290783,#290792,#290801,#290810,#290819,#290828,#290837,#290846, + #290855,#290864,#290873,#290882,#290891,#290900,#290909,#290918, + #290927,#290936,#290945,#290954,#290963,#290972,#290981,#290990, + #290999,#291008,#291017,#291026,#291035,#291044,#291053,#291062, + #291071,#291080,#291089,#291098,#291107,#291116,#291125,#291134, + #291143,#291152,#291161,#291170,#291179,#291188,#291197,#291206, + #291215,#291224,#291233,#291242,#291251,#291260,#291269,#291278, + #291287,#291296,#291305,#291314,#291323,#291332,#291341,#291350, + #291359,#291368,#291377,#291386,#291395,#291404,#291413,#291422, + #291431,#291440,#291449,#291458,#291467,#291476,#291485,#291494, + #291503,#291512,#291521,#291530,#291539,#291548,#291557,#291566, + #291575,#291584,#291593,#291602,#291611,#291620,#291629,#291638, + #291647,#291656,#291665,#291674,#291683,#291692,#291701,#291710, + #291719,#291728,#291737,#291746,#291755,#291764,#291773,#291782, + #291791,#291800,#291809,#291818,#291827,#291836,#291845,#291854, + #291863,#291872,#291881,#291890,#291899,#291908,#291917,#291926, + #291935,#291944,#291953,#291962,#291971,#291980,#291989,#291998, + #292007,#292016,#292025,#292034,#292043,#292052,#292061,#292070, + #292079,#292088,#292097,#292106,#292115,#292124,#292133,#292142, + #292151,#292160,#292169,#292178,#292187,#292196,#292205,#292214, + #292223,#292232,#292241,#292250,#292259,#292268,#292277,#292286, + #292295,#292304,#292313,#292322,#292331,#292340,#292349,#292358, + #292367,#292376,#292385,#292394,#292403,#292412,#292421,#292430, + #292439,#292448,#292457,#292466,#292475,#292484,#292493,#292502, + #292511,#292520,#292529,#292538,#292547,#292556,#292565,#292574, + #292583,#292592,#292601,#292610,#292619,#292628,#292637,#292646, + #292655,#292664,#292673,#292682,#292691,#292700,#292709,#292718, + #292727,#292736,#292745,#292754,#292763,#292772,#292781,#292790, + #292799,#292808,#292817,#292826,#292835,#292844,#292853,#292862, + #292871,#292880,#292889,#292898,#292907,#292916,#292925,#292934, + #292943,#292952,#292961,#292970,#292979,#292988,#292997,#293006, + #293015,#293024,#293033,#293042,#293051,#293060,#293069,#293078, + #293087,#293096,#293105,#293114,#293123,#293132,#293141,#293150, + #293159,#293168,#293177,#293186,#293195,#293204,#293213,#293222, + #293231,#293240,#293249,#293258,#293267,#293276,#293285,#293294, + #293303,#293312,#293321,#293330,#293339,#293348,#293357,#293366, + #293375,#293384,#293393,#293402,#293411,#293420,#293429,#293438, + #293447,#293456,#293465,#293474,#293483,#293492,#293501,#293510, + #293519,#293528,#293537,#293546,#293555,#293564,#293573,#293582, + #293591,#293600,#293609,#293618,#293627,#293636,#293645,#293654, + #293663,#293672,#293681,#293690,#293699,#293708,#293717,#293726, + #293735,#293744,#293753,#293762,#293771,#293780,#293789,#293798, + #293807,#293816,#293825,#293834,#293843,#293852,#293861,#293870, + #293879,#293888,#293897,#293906,#293915,#293924,#293933,#293942, + #293951,#293960,#293969,#293978,#293987,#293996,#294005,#294014, + #294023,#294032),#36128); +#287831 = STYLED_ITEM('color',(#287832),#20328); +#287832 = PRESENTATION_STYLE_ASSIGNMENT((#287833,#287838)); +#287833 = SURFACE_STYLE_USAGE(.BOTH.,#287834); +#287834 = SURFACE_SIDE_STYLE('',(#287835)); +#287835 = SURFACE_STYLE_FILL_AREA(#287836); +#287836 = FILL_AREA_STYLE('',(#287837)); +#287837 = FILL_AREA_STYLE_COLOUR('',#270350); +#287838 = CURVE_STYLE('',#287839,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287840 = STYLED_ITEM('color',(#287841),#20368); +#287841 = PRESENTATION_STYLE_ASSIGNMENT((#287842,#287847)); +#287842 = SURFACE_STYLE_USAGE(.BOTH.,#287843); +#287843 = SURFACE_SIDE_STYLE('',(#287844)); +#287844 = SURFACE_STYLE_FILL_AREA(#287845); +#287845 = FILL_AREA_STYLE('',(#287846)); +#287846 = FILL_AREA_STYLE_COLOUR('',#270350); +#287847 = CURVE_STYLE('',#287848,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287849 = STYLED_ITEM('color',(#287850),#20431); +#287850 = PRESENTATION_STYLE_ASSIGNMENT((#287851,#287856)); +#287851 = SURFACE_STYLE_USAGE(.BOTH.,#287852); +#287852 = SURFACE_SIDE_STYLE('',(#287853)); +#287853 = SURFACE_STYLE_FILL_AREA(#287854); +#287854 = FILL_AREA_STYLE('',(#287855)); +#287855 = FILL_AREA_STYLE_COLOUR('',#270350); +#287856 = CURVE_STYLE('',#287857,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287858 = STYLED_ITEM('color',(#287859),#20494); +#287859 = PRESENTATION_STYLE_ASSIGNMENT((#287860,#287865)); +#287860 = SURFACE_STYLE_USAGE(.BOTH.,#287861); +#287861 = SURFACE_SIDE_STYLE('',(#287862)); +#287862 = SURFACE_STYLE_FILL_AREA(#287863); +#287863 = FILL_AREA_STYLE('',(#287864)); +#287864 = FILL_AREA_STYLE_COLOUR('',#270350); +#287865 = CURVE_STYLE('',#287866,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287867 = STYLED_ITEM('color',(#287868),#20511); +#287868 = PRESENTATION_STYLE_ASSIGNMENT((#287869,#287874)); +#287869 = SURFACE_STYLE_USAGE(.BOTH.,#287870); +#287870 = SURFACE_SIDE_STYLE('',(#287871)); +#287871 = SURFACE_STYLE_FILL_AREA(#287872); +#287872 = FILL_AREA_STYLE('',(#287873)); +#287873 = FILL_AREA_STYLE_COLOUR('',#270350); +#287874 = CURVE_STYLE('',#287875,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287876 = STYLED_ITEM('color',(#287877),#21208); +#287877 = PRESENTATION_STYLE_ASSIGNMENT((#287878,#287883)); +#287878 = SURFACE_STYLE_USAGE(.BOTH.,#287879); +#287879 = SURFACE_SIDE_STYLE('',(#287880)); +#287880 = SURFACE_STYLE_FILL_AREA(#287881); +#287881 = FILL_AREA_STYLE('',(#287882)); +#287882 = FILL_AREA_STYLE_COLOUR('',#270350); +#287883 = CURVE_STYLE('',#287884,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287885 = STYLED_ITEM('color',(#287886),#21230); +#287886 = PRESENTATION_STYLE_ASSIGNMENT((#287887,#287892)); +#287887 = SURFACE_STYLE_USAGE(.BOTH.,#287888); +#287888 = SURFACE_SIDE_STYLE('',(#287889)); +#287889 = SURFACE_STYLE_FILL_AREA(#287890); +#287890 = FILL_AREA_STYLE('',(#287891)); +#287891 = FILL_AREA_STYLE_COLOUR('',#270350); +#287892 = CURVE_STYLE('',#287893,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287894 = STYLED_ITEM('color',(#287895),#21247); +#287895 = PRESENTATION_STYLE_ASSIGNMENT((#287896,#287901)); +#287896 = SURFACE_STYLE_USAGE(.BOTH.,#287897); +#287897 = SURFACE_SIDE_STYLE('',(#287898)); +#287898 = SURFACE_STYLE_FILL_AREA(#287899); +#287899 = FILL_AREA_STYLE('',(#287900)); +#287900 = FILL_AREA_STYLE_COLOUR('',#270350); +#287901 = CURVE_STYLE('',#287902,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#287902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287903 = OVER_RIDING_STYLED_ITEM('overriding color',(#287904),#21280, + #287894); +#287904 = PRESENTATION_STYLE_ASSIGNMENT((#287905,#287910)); +#287905 = SURFACE_STYLE_USAGE(.BOTH.,#287906); +#287906 = SURFACE_SIDE_STYLE('',(#287907)); +#287907 = SURFACE_STYLE_FILL_AREA(#287908); +#287908 = FILL_AREA_STYLE('',(#287909)); +#287909 = FILL_AREA_STYLE_COLOUR('',#285989); +#287910 = CURVE_STYLE('',#287911,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287912 = OVER_RIDING_STYLED_ITEM('overriding color',(#287913),#21312, + #287894); +#287913 = PRESENTATION_STYLE_ASSIGNMENT((#287914,#287919)); +#287914 = SURFACE_STYLE_USAGE(.BOTH.,#287915); +#287915 = SURFACE_SIDE_STYLE('',(#287916)); +#287916 = SURFACE_STYLE_FILL_AREA(#287917); +#287917 = FILL_AREA_STYLE('',(#287918)); +#287918 = FILL_AREA_STYLE_COLOUR('',#285989); +#287919 = CURVE_STYLE('',#287920,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287921 = OVER_RIDING_STYLED_ITEM('overriding color',(#287922),#21346, + #287894); +#287922 = PRESENTATION_STYLE_ASSIGNMENT((#287923,#287928)); +#287923 = SURFACE_STYLE_USAGE(.BOTH.,#287924); +#287924 = SURFACE_SIDE_STYLE('',(#287925)); +#287925 = SURFACE_STYLE_FILL_AREA(#287926); +#287926 = FILL_AREA_STYLE('',(#287927)); +#287927 = FILL_AREA_STYLE_COLOUR('',#285989); +#287928 = CURVE_STYLE('',#287929,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287930 = OVER_RIDING_STYLED_ITEM('overriding color',(#287931),#21378, + #287894); +#287931 = PRESENTATION_STYLE_ASSIGNMENT((#287932,#287937)); +#287932 = SURFACE_STYLE_USAGE(.BOTH.,#287933); +#287933 = SURFACE_SIDE_STYLE('',(#287934)); +#287934 = SURFACE_STYLE_FILL_AREA(#287935); +#287935 = FILL_AREA_STYLE('',(#287936)); +#287936 = FILL_AREA_STYLE_COLOUR('',#285989); +#287937 = CURVE_STYLE('',#287938,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287939 = OVER_RIDING_STYLED_ITEM('overriding color',(#287940),#21412, + #287894); +#287940 = PRESENTATION_STYLE_ASSIGNMENT((#287941,#287946)); +#287941 = SURFACE_STYLE_USAGE(.BOTH.,#287942); +#287942 = SURFACE_SIDE_STYLE('',(#287943)); +#287943 = SURFACE_STYLE_FILL_AREA(#287944); +#287944 = FILL_AREA_STYLE('',(#287945)); +#287945 = FILL_AREA_STYLE_COLOUR('',#285989); +#287946 = CURVE_STYLE('',#287947,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287948 = OVER_RIDING_STYLED_ITEM('overriding color',(#287949),#21444, + #287894); +#287949 = PRESENTATION_STYLE_ASSIGNMENT((#287950,#287955)); +#287950 = SURFACE_STYLE_USAGE(.BOTH.,#287951); +#287951 = SURFACE_SIDE_STYLE('',(#287952)); +#287952 = SURFACE_STYLE_FILL_AREA(#287953); +#287953 = FILL_AREA_STYLE('',(#287954)); +#287954 = FILL_AREA_STYLE_COLOUR('',#285989); +#287955 = CURVE_STYLE('',#287956,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287957 = OVER_RIDING_STYLED_ITEM('overriding color',(#287958),#21478, + #287894); +#287958 = PRESENTATION_STYLE_ASSIGNMENT((#287959,#287964)); +#287959 = SURFACE_STYLE_USAGE(.BOTH.,#287960); +#287960 = SURFACE_SIDE_STYLE('',(#287961)); +#287961 = SURFACE_STYLE_FILL_AREA(#287962); +#287962 = FILL_AREA_STYLE('',(#287963)); +#287963 = FILL_AREA_STYLE_COLOUR('',#285989); +#287964 = CURVE_STYLE('',#287965,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287966 = OVER_RIDING_STYLED_ITEM('overriding color',(#287967),#21510, + #287894); +#287967 = PRESENTATION_STYLE_ASSIGNMENT((#287968,#287973)); +#287968 = SURFACE_STYLE_USAGE(.BOTH.,#287969); +#287969 = SURFACE_SIDE_STYLE('',(#287970)); +#287970 = SURFACE_STYLE_FILL_AREA(#287971); +#287971 = FILL_AREA_STYLE('',(#287972)); +#287972 = FILL_AREA_STYLE_COLOUR('',#285989); +#287973 = CURVE_STYLE('',#287974,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287975 = OVER_RIDING_STYLED_ITEM('overriding color',(#287976),#21544, + #287894); +#287976 = PRESENTATION_STYLE_ASSIGNMENT((#287977,#287982)); +#287977 = SURFACE_STYLE_USAGE(.BOTH.,#287978); +#287978 = SURFACE_SIDE_STYLE('',(#287979)); +#287979 = SURFACE_STYLE_FILL_AREA(#287980); +#287980 = FILL_AREA_STYLE('',(#287981)); +#287981 = FILL_AREA_STYLE_COLOUR('',#285989); +#287982 = CURVE_STYLE('',#287983,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287984 = OVER_RIDING_STYLED_ITEM('overriding color',(#287985),#21576, + #287894); +#287985 = PRESENTATION_STYLE_ASSIGNMENT((#287986,#287991)); +#287986 = SURFACE_STYLE_USAGE(.BOTH.,#287987); +#287987 = SURFACE_SIDE_STYLE('',(#287988)); +#287988 = SURFACE_STYLE_FILL_AREA(#287989); +#287989 = FILL_AREA_STYLE('',(#287990)); +#287990 = FILL_AREA_STYLE_COLOUR('',#285989); +#287991 = CURVE_STYLE('',#287992,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#287992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#287993 = OVER_RIDING_STYLED_ITEM('overriding color',(#287994),#21610, + #287894); +#287994 = PRESENTATION_STYLE_ASSIGNMENT((#287995,#288000)); +#287995 = SURFACE_STYLE_USAGE(.BOTH.,#287996); +#287996 = SURFACE_SIDE_STYLE('',(#287997)); +#287997 = SURFACE_STYLE_FILL_AREA(#287998); +#287998 = FILL_AREA_STYLE('',(#287999)); +#287999 = FILL_AREA_STYLE_COLOUR('',#285989); +#288000 = CURVE_STYLE('',#288001,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288002 = OVER_RIDING_STYLED_ITEM('overriding color',(#288003),#21642, + #287894); +#288003 = PRESENTATION_STYLE_ASSIGNMENT((#288004,#288009)); +#288004 = SURFACE_STYLE_USAGE(.BOTH.,#288005); +#288005 = SURFACE_SIDE_STYLE('',(#288006)); +#288006 = SURFACE_STYLE_FILL_AREA(#288007); +#288007 = FILL_AREA_STYLE('',(#288008)); +#288008 = FILL_AREA_STYLE_COLOUR('',#285989); +#288009 = CURVE_STYLE('',#288010,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288011 = OVER_RIDING_STYLED_ITEM('overriding color',(#288012),#21676, + #287894); +#288012 = PRESENTATION_STYLE_ASSIGNMENT((#288013,#288018)); +#288013 = SURFACE_STYLE_USAGE(.BOTH.,#288014); +#288014 = SURFACE_SIDE_STYLE('',(#288015)); +#288015 = SURFACE_STYLE_FILL_AREA(#288016); +#288016 = FILL_AREA_STYLE('',(#288017)); +#288017 = FILL_AREA_STYLE_COLOUR('',#285989); +#288018 = CURVE_STYLE('',#288019,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288020 = OVER_RIDING_STYLED_ITEM('overriding color',(#288021),#21708, + #287894); +#288021 = PRESENTATION_STYLE_ASSIGNMENT((#288022,#288027)); +#288022 = SURFACE_STYLE_USAGE(.BOTH.,#288023); +#288023 = SURFACE_SIDE_STYLE('',(#288024)); +#288024 = SURFACE_STYLE_FILL_AREA(#288025); +#288025 = FILL_AREA_STYLE('',(#288026)); +#288026 = FILL_AREA_STYLE_COLOUR('',#285989); +#288027 = CURVE_STYLE('',#288028,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288029 = OVER_RIDING_STYLED_ITEM('overriding color',(#288030),#21742, + #287894); +#288030 = PRESENTATION_STYLE_ASSIGNMENT((#288031,#288036)); +#288031 = SURFACE_STYLE_USAGE(.BOTH.,#288032); +#288032 = SURFACE_SIDE_STYLE('',(#288033)); +#288033 = SURFACE_STYLE_FILL_AREA(#288034); +#288034 = FILL_AREA_STYLE('',(#288035)); +#288035 = FILL_AREA_STYLE_COLOUR('',#285989); +#288036 = CURVE_STYLE('',#288037,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288038 = OVER_RIDING_STYLED_ITEM('overriding color',(#288039),#21774, + #287894); +#288039 = PRESENTATION_STYLE_ASSIGNMENT((#288040,#288045)); +#288040 = SURFACE_STYLE_USAGE(.BOTH.,#288041); +#288041 = SURFACE_SIDE_STYLE('',(#288042)); +#288042 = SURFACE_STYLE_FILL_AREA(#288043); +#288043 = FILL_AREA_STYLE('',(#288044)); +#288044 = FILL_AREA_STYLE_COLOUR('',#285989); +#288045 = CURVE_STYLE('',#288046,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288047 = OVER_RIDING_STYLED_ITEM('overriding color',(#288048),#21808, + #287894); +#288048 = PRESENTATION_STYLE_ASSIGNMENT((#288049,#288054)); +#288049 = SURFACE_STYLE_USAGE(.BOTH.,#288050); +#288050 = SURFACE_SIDE_STYLE('',(#288051)); +#288051 = SURFACE_STYLE_FILL_AREA(#288052); +#288052 = FILL_AREA_STYLE('',(#288053)); +#288053 = FILL_AREA_STYLE_COLOUR('',#285989); +#288054 = CURVE_STYLE('',#288055,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288056 = OVER_RIDING_STYLED_ITEM('overriding color',(#288057),#21840, + #287894); +#288057 = PRESENTATION_STYLE_ASSIGNMENT((#288058,#288063)); +#288058 = SURFACE_STYLE_USAGE(.BOTH.,#288059); +#288059 = SURFACE_SIDE_STYLE('',(#288060)); +#288060 = SURFACE_STYLE_FILL_AREA(#288061); +#288061 = FILL_AREA_STYLE('',(#288062)); +#288062 = FILL_AREA_STYLE_COLOUR('',#285989); +#288063 = CURVE_STYLE('',#288064,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288065 = OVER_RIDING_STYLED_ITEM('overriding color',(#288066),#21874, + #287894); +#288066 = PRESENTATION_STYLE_ASSIGNMENT((#288067,#288072)); +#288067 = SURFACE_STYLE_USAGE(.BOTH.,#288068); +#288068 = SURFACE_SIDE_STYLE('',(#288069)); +#288069 = SURFACE_STYLE_FILL_AREA(#288070); +#288070 = FILL_AREA_STYLE('',(#288071)); +#288071 = FILL_AREA_STYLE_COLOUR('',#285989); +#288072 = CURVE_STYLE('',#288073,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288074 = OVER_RIDING_STYLED_ITEM('overriding color',(#288075),#21906, + #287894); +#288075 = PRESENTATION_STYLE_ASSIGNMENT((#288076,#288081)); +#288076 = SURFACE_STYLE_USAGE(.BOTH.,#288077); +#288077 = SURFACE_SIDE_STYLE('',(#288078)); +#288078 = SURFACE_STYLE_FILL_AREA(#288079); +#288079 = FILL_AREA_STYLE('',(#288080)); +#288080 = FILL_AREA_STYLE_COLOUR('',#285989); +#288081 = CURVE_STYLE('',#288082,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288083 = OVER_RIDING_STYLED_ITEM('overriding color',(#288084),#21940, + #287894); +#288084 = PRESENTATION_STYLE_ASSIGNMENT((#288085,#288090)); +#288085 = SURFACE_STYLE_USAGE(.BOTH.,#288086); +#288086 = SURFACE_SIDE_STYLE('',(#288087)); +#288087 = SURFACE_STYLE_FILL_AREA(#288088); +#288088 = FILL_AREA_STYLE('',(#288089)); +#288089 = FILL_AREA_STYLE_COLOUR('',#285989); +#288090 = CURVE_STYLE('',#288091,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288092 = OVER_RIDING_STYLED_ITEM('overriding color',(#288093),#21972, + #287894); +#288093 = PRESENTATION_STYLE_ASSIGNMENT((#288094,#288099)); +#288094 = SURFACE_STYLE_USAGE(.BOTH.,#288095); +#288095 = SURFACE_SIDE_STYLE('',(#288096)); +#288096 = SURFACE_STYLE_FILL_AREA(#288097); +#288097 = FILL_AREA_STYLE('',(#288098)); +#288098 = FILL_AREA_STYLE_COLOUR('',#285989); +#288099 = CURVE_STYLE('',#288100,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288101 = OVER_RIDING_STYLED_ITEM('overriding color',(#288102),#22006, + #287894); +#288102 = PRESENTATION_STYLE_ASSIGNMENT((#288103,#288108)); +#288103 = SURFACE_STYLE_USAGE(.BOTH.,#288104); +#288104 = SURFACE_SIDE_STYLE('',(#288105)); +#288105 = SURFACE_STYLE_FILL_AREA(#288106); +#288106 = FILL_AREA_STYLE('',(#288107)); +#288107 = FILL_AREA_STYLE_COLOUR('',#285989); +#288108 = CURVE_STYLE('',#288109,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288110 = OVER_RIDING_STYLED_ITEM('overriding color',(#288111),#22038, + #287894); +#288111 = PRESENTATION_STYLE_ASSIGNMENT((#288112,#288117)); +#288112 = SURFACE_STYLE_USAGE(.BOTH.,#288113); +#288113 = SURFACE_SIDE_STYLE('',(#288114)); +#288114 = SURFACE_STYLE_FILL_AREA(#288115); +#288115 = FILL_AREA_STYLE('',(#288116)); +#288116 = FILL_AREA_STYLE_COLOUR('',#285989); +#288117 = CURVE_STYLE('',#288118,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288119 = OVER_RIDING_STYLED_ITEM('overriding color',(#288120),#22072, + #287894); +#288120 = PRESENTATION_STYLE_ASSIGNMENT((#288121,#288126)); +#288121 = SURFACE_STYLE_USAGE(.BOTH.,#288122); +#288122 = SURFACE_SIDE_STYLE('',(#288123)); +#288123 = SURFACE_STYLE_FILL_AREA(#288124); +#288124 = FILL_AREA_STYLE('',(#288125)); +#288125 = FILL_AREA_STYLE_COLOUR('',#285989); +#288126 = CURVE_STYLE('',#288127,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288128 = OVER_RIDING_STYLED_ITEM('overriding color',(#288129),#22104, + #287894); +#288129 = PRESENTATION_STYLE_ASSIGNMENT((#288130,#288135)); +#288130 = SURFACE_STYLE_USAGE(.BOTH.,#288131); +#288131 = SURFACE_SIDE_STYLE('',(#288132)); +#288132 = SURFACE_STYLE_FILL_AREA(#288133); +#288133 = FILL_AREA_STYLE('',(#288134)); +#288134 = FILL_AREA_STYLE_COLOUR('',#285989); +#288135 = CURVE_STYLE('',#288136,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288137 = OVER_RIDING_STYLED_ITEM('overriding color',(#288138),#22138, + #287894); +#288138 = PRESENTATION_STYLE_ASSIGNMENT((#288139,#288144)); +#288139 = SURFACE_STYLE_USAGE(.BOTH.,#288140); +#288140 = SURFACE_SIDE_STYLE('',(#288141)); +#288141 = SURFACE_STYLE_FILL_AREA(#288142); +#288142 = FILL_AREA_STYLE('',(#288143)); +#288143 = FILL_AREA_STYLE_COLOUR('',#285989); +#288144 = CURVE_STYLE('',#288145,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288146 = OVER_RIDING_STYLED_ITEM('overriding color',(#288147),#22170, + #287894); +#288147 = PRESENTATION_STYLE_ASSIGNMENT((#288148,#288153)); +#288148 = SURFACE_STYLE_USAGE(.BOTH.,#288149); +#288149 = SURFACE_SIDE_STYLE('',(#288150)); +#288150 = SURFACE_STYLE_FILL_AREA(#288151); +#288151 = FILL_AREA_STYLE('',(#288152)); +#288152 = FILL_AREA_STYLE_COLOUR('',#285989); +#288153 = CURVE_STYLE('',#288154,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288155 = OVER_RIDING_STYLED_ITEM('overriding color',(#288156),#22204, + #287894); +#288156 = PRESENTATION_STYLE_ASSIGNMENT((#288157,#288162)); +#288157 = SURFACE_STYLE_USAGE(.BOTH.,#288158); +#288158 = SURFACE_SIDE_STYLE('',(#288159)); +#288159 = SURFACE_STYLE_FILL_AREA(#288160); +#288160 = FILL_AREA_STYLE('',(#288161)); +#288161 = FILL_AREA_STYLE_COLOUR('',#285989); +#288162 = CURVE_STYLE('',#288163,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288164 = OVER_RIDING_STYLED_ITEM('overriding color',(#288165),#22236, + #287894); +#288165 = PRESENTATION_STYLE_ASSIGNMENT((#288166,#288171)); +#288166 = SURFACE_STYLE_USAGE(.BOTH.,#288167); +#288167 = SURFACE_SIDE_STYLE('',(#288168)); +#288168 = SURFACE_STYLE_FILL_AREA(#288169); +#288169 = FILL_AREA_STYLE('',(#288170)); +#288170 = FILL_AREA_STYLE_COLOUR('',#285989); +#288171 = CURVE_STYLE('',#288172,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288173 = OVER_RIDING_STYLED_ITEM('overriding color',(#288174),#22270, + #287894); +#288174 = PRESENTATION_STYLE_ASSIGNMENT((#288175,#288180)); +#288175 = SURFACE_STYLE_USAGE(.BOTH.,#288176); +#288176 = SURFACE_SIDE_STYLE('',(#288177)); +#288177 = SURFACE_STYLE_FILL_AREA(#288178); +#288178 = FILL_AREA_STYLE('',(#288179)); +#288179 = FILL_AREA_STYLE_COLOUR('',#285989); +#288180 = CURVE_STYLE('',#288181,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288182 = OVER_RIDING_STYLED_ITEM('overriding color',(#288183),#22302, + #287894); +#288183 = PRESENTATION_STYLE_ASSIGNMENT((#288184,#288189)); +#288184 = SURFACE_STYLE_USAGE(.BOTH.,#288185); +#288185 = SURFACE_SIDE_STYLE('',(#288186)); +#288186 = SURFACE_STYLE_FILL_AREA(#288187); +#288187 = FILL_AREA_STYLE('',(#288188)); +#288188 = FILL_AREA_STYLE_COLOUR('',#285989); +#288189 = CURVE_STYLE('',#288190,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288191 = OVER_RIDING_STYLED_ITEM('overriding color',(#288192),#22336, + #287894); +#288192 = PRESENTATION_STYLE_ASSIGNMENT((#288193,#288198)); +#288193 = SURFACE_STYLE_USAGE(.BOTH.,#288194); +#288194 = SURFACE_SIDE_STYLE('',(#288195)); +#288195 = SURFACE_STYLE_FILL_AREA(#288196); +#288196 = FILL_AREA_STYLE('',(#288197)); +#288197 = FILL_AREA_STYLE_COLOUR('',#285989); +#288198 = CURVE_STYLE('',#288199,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288200 = OVER_RIDING_STYLED_ITEM('overriding color',(#288201),#22368, + #287894); +#288201 = PRESENTATION_STYLE_ASSIGNMENT((#288202,#288207)); +#288202 = SURFACE_STYLE_USAGE(.BOTH.,#288203); +#288203 = SURFACE_SIDE_STYLE('',(#288204)); +#288204 = SURFACE_STYLE_FILL_AREA(#288205); +#288205 = FILL_AREA_STYLE('',(#288206)); +#288206 = FILL_AREA_STYLE_COLOUR('',#285989); +#288207 = CURVE_STYLE('',#288208,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288209 = OVER_RIDING_STYLED_ITEM('overriding color',(#288210),#22402, + #287894); +#288210 = PRESENTATION_STYLE_ASSIGNMENT((#288211,#288216)); +#288211 = SURFACE_STYLE_USAGE(.BOTH.,#288212); +#288212 = SURFACE_SIDE_STYLE('',(#288213)); +#288213 = SURFACE_STYLE_FILL_AREA(#288214); +#288214 = FILL_AREA_STYLE('',(#288215)); +#288215 = FILL_AREA_STYLE_COLOUR('',#285989); +#288216 = CURVE_STYLE('',#288217,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288218 = OVER_RIDING_STYLED_ITEM('overriding color',(#288219),#22434, + #287894); +#288219 = PRESENTATION_STYLE_ASSIGNMENT((#288220,#288225)); +#288220 = SURFACE_STYLE_USAGE(.BOTH.,#288221); +#288221 = SURFACE_SIDE_STYLE('',(#288222)); +#288222 = SURFACE_STYLE_FILL_AREA(#288223); +#288223 = FILL_AREA_STYLE('',(#288224)); +#288224 = FILL_AREA_STYLE_COLOUR('',#285989); +#288225 = CURVE_STYLE('',#288226,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288227 = OVER_RIDING_STYLED_ITEM('overriding color',(#288228),#22468, + #287894); +#288228 = PRESENTATION_STYLE_ASSIGNMENT((#288229,#288234)); +#288229 = SURFACE_STYLE_USAGE(.BOTH.,#288230); +#288230 = SURFACE_SIDE_STYLE('',(#288231)); +#288231 = SURFACE_STYLE_FILL_AREA(#288232); +#288232 = FILL_AREA_STYLE('',(#288233)); +#288233 = FILL_AREA_STYLE_COLOUR('',#285989); +#288234 = CURVE_STYLE('',#288235,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288236 = OVER_RIDING_STYLED_ITEM('overriding color',(#288237),#22500, + #287894); +#288237 = PRESENTATION_STYLE_ASSIGNMENT((#288238,#288243)); +#288238 = SURFACE_STYLE_USAGE(.BOTH.,#288239); +#288239 = SURFACE_SIDE_STYLE('',(#288240)); +#288240 = SURFACE_STYLE_FILL_AREA(#288241); +#288241 = FILL_AREA_STYLE('',(#288242)); +#288242 = FILL_AREA_STYLE_COLOUR('',#285989); +#288243 = CURVE_STYLE('',#288244,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288245 = OVER_RIDING_STYLED_ITEM('overriding color',(#288246),#22534, + #287894); +#288246 = PRESENTATION_STYLE_ASSIGNMENT((#288247,#288252)); +#288247 = SURFACE_STYLE_USAGE(.BOTH.,#288248); +#288248 = SURFACE_SIDE_STYLE('',(#288249)); +#288249 = SURFACE_STYLE_FILL_AREA(#288250); +#288250 = FILL_AREA_STYLE('',(#288251)); +#288251 = FILL_AREA_STYLE_COLOUR('',#285989); +#288252 = CURVE_STYLE('',#288253,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288254 = OVER_RIDING_STYLED_ITEM('overriding color',(#288255),#22566, + #287894); +#288255 = PRESENTATION_STYLE_ASSIGNMENT((#288256,#288261)); +#288256 = SURFACE_STYLE_USAGE(.BOTH.,#288257); +#288257 = SURFACE_SIDE_STYLE('',(#288258)); +#288258 = SURFACE_STYLE_FILL_AREA(#288259); +#288259 = FILL_AREA_STYLE('',(#288260)); +#288260 = FILL_AREA_STYLE_COLOUR('',#285989); +#288261 = CURVE_STYLE('',#288262,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#288262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288263 = STYLED_ITEM('color',(#288264),#22584); +#288264 = PRESENTATION_STYLE_ASSIGNMENT((#288265,#288270)); +#288265 = SURFACE_STYLE_USAGE(.BOTH.,#288266); +#288266 = SURFACE_SIDE_STYLE('',(#288267)); +#288267 = SURFACE_STYLE_FILL_AREA(#288268); +#288268 = FILL_AREA_STYLE('',(#288269)); +#288269 = FILL_AREA_STYLE_COLOUR('',#270350); +#288270 = CURVE_STYLE('',#288271,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288272 = STYLED_ITEM('color',(#288273),#22596); +#288273 = PRESENTATION_STYLE_ASSIGNMENT((#288274,#288279)); +#288274 = SURFACE_STYLE_USAGE(.BOTH.,#288275); +#288275 = SURFACE_SIDE_STYLE('',(#288276)); +#288276 = SURFACE_STYLE_FILL_AREA(#288277); +#288277 = FILL_AREA_STYLE('',(#288278)); +#288278 = FILL_AREA_STYLE_COLOUR('',#270350); +#288279 = CURVE_STYLE('',#288280,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288281 = STYLED_ITEM('color',(#288282),#22608); +#288282 = PRESENTATION_STYLE_ASSIGNMENT((#288283,#288288)); +#288283 = SURFACE_STYLE_USAGE(.BOTH.,#288284); +#288284 = SURFACE_SIDE_STYLE('',(#288285)); +#288285 = SURFACE_STYLE_FILL_AREA(#288286); +#288286 = FILL_AREA_STYLE('',(#288287)); +#288287 = FILL_AREA_STYLE_COLOUR('',#270350); +#288288 = CURVE_STYLE('',#288289,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288290 = STYLED_ITEM('color',(#288291),#22639); +#288291 = PRESENTATION_STYLE_ASSIGNMENT((#288292,#288297)); +#288292 = SURFACE_STYLE_USAGE(.BOTH.,#288293); +#288293 = SURFACE_SIDE_STYLE('',(#288294)); +#288294 = SURFACE_STYLE_FILL_AREA(#288295); +#288295 = FILL_AREA_STYLE('',(#288296)); +#288296 = FILL_AREA_STYLE_COLOUR('',#270350); +#288297 = CURVE_STYLE('',#288298,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288299 = STYLED_ITEM('color',(#288300),#22663); +#288300 = PRESENTATION_STYLE_ASSIGNMENT((#288301,#288306)); +#288301 = SURFACE_STYLE_USAGE(.BOTH.,#288302); +#288302 = SURFACE_SIDE_STYLE('',(#288303)); +#288303 = SURFACE_STYLE_FILL_AREA(#288304); +#288304 = FILL_AREA_STYLE('',(#288305)); +#288305 = FILL_AREA_STYLE_COLOUR('',#270350); +#288306 = CURVE_STYLE('',#288307,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288308 = STYLED_ITEM('color',(#288309),#22687); +#288309 = PRESENTATION_STYLE_ASSIGNMENT((#288310,#288315)); +#288310 = SURFACE_STYLE_USAGE(.BOTH.,#288311); +#288311 = SURFACE_SIDE_STYLE('',(#288312)); +#288312 = SURFACE_STYLE_FILL_AREA(#288313); +#288313 = FILL_AREA_STYLE('',(#288314)); +#288314 = FILL_AREA_STYLE_COLOUR('',#270350); +#288315 = CURVE_STYLE('',#288316,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288317 = STYLED_ITEM('color',(#288318),#22704); +#288318 = PRESENTATION_STYLE_ASSIGNMENT((#288319,#288324)); +#288319 = SURFACE_STYLE_USAGE(.BOTH.,#288320); +#288320 = SURFACE_SIDE_STYLE('',(#288321)); +#288321 = SURFACE_STYLE_FILL_AREA(#288322); +#288322 = FILL_AREA_STYLE('',(#288323)); +#288323 = FILL_AREA_STYLE_COLOUR('',#270350); +#288324 = CURVE_STYLE('',#288325,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288326 = STYLED_ITEM('color',(#288327),#22735); +#288327 = PRESENTATION_STYLE_ASSIGNMENT((#288328,#288333)); +#288328 = SURFACE_STYLE_USAGE(.BOTH.,#288329); +#288329 = SURFACE_SIDE_STYLE('',(#288330)); +#288330 = SURFACE_STYLE_FILL_AREA(#288331); +#288331 = FILL_AREA_STYLE('',(#288332)); +#288332 = FILL_AREA_STYLE_COLOUR('',#270350); +#288333 = CURVE_STYLE('',#288334,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288335 = STYLED_ITEM('color',(#288336),#22759); +#288336 = PRESENTATION_STYLE_ASSIGNMENT((#288337,#288342)); +#288337 = SURFACE_STYLE_USAGE(.BOTH.,#288338); +#288338 = SURFACE_SIDE_STYLE('',(#288339)); +#288339 = SURFACE_STYLE_FILL_AREA(#288340); +#288340 = FILL_AREA_STYLE('',(#288341)); +#288341 = FILL_AREA_STYLE_COLOUR('',#270350); +#288342 = CURVE_STYLE('',#288343,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288344 = STYLED_ITEM('color',(#288345),#22783); +#288345 = PRESENTATION_STYLE_ASSIGNMENT((#288346,#288351)); +#288346 = SURFACE_STYLE_USAGE(.BOTH.,#288347); +#288347 = SURFACE_SIDE_STYLE('',(#288348)); +#288348 = SURFACE_STYLE_FILL_AREA(#288349); +#288349 = FILL_AREA_STYLE('',(#288350)); +#288350 = FILL_AREA_STYLE_COLOUR('',#270350); +#288351 = CURVE_STYLE('',#288352,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288353 = STYLED_ITEM('color',(#288354),#22800); +#288354 = PRESENTATION_STYLE_ASSIGNMENT((#288355,#288360)); +#288355 = SURFACE_STYLE_USAGE(.BOTH.,#288356); +#288356 = SURFACE_SIDE_STYLE('',(#288357)); +#288357 = SURFACE_STYLE_FILL_AREA(#288358); +#288358 = FILL_AREA_STYLE('',(#288359)); +#288359 = FILL_AREA_STYLE_COLOUR('',#270350); +#288360 = CURVE_STYLE('',#288361,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288362 = STYLED_ITEM('color',(#288363),#22831); +#288363 = PRESENTATION_STYLE_ASSIGNMENT((#288364,#288369)); +#288364 = SURFACE_STYLE_USAGE(.BOTH.,#288365); +#288365 = SURFACE_SIDE_STYLE('',(#288366)); +#288366 = SURFACE_STYLE_FILL_AREA(#288367); +#288367 = FILL_AREA_STYLE('',(#288368)); +#288368 = FILL_AREA_STYLE_COLOUR('',#270350); +#288369 = CURVE_STYLE('',#288370,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288371 = STYLED_ITEM('color',(#288372),#22855); +#288372 = PRESENTATION_STYLE_ASSIGNMENT((#288373,#288378)); +#288373 = SURFACE_STYLE_USAGE(.BOTH.,#288374); +#288374 = SURFACE_SIDE_STYLE('',(#288375)); +#288375 = SURFACE_STYLE_FILL_AREA(#288376); +#288376 = FILL_AREA_STYLE('',(#288377)); +#288377 = FILL_AREA_STYLE_COLOUR('',#270350); +#288378 = CURVE_STYLE('',#288379,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288380 = STYLED_ITEM('color',(#288381),#22879); +#288381 = PRESENTATION_STYLE_ASSIGNMENT((#288382,#288387)); +#288382 = SURFACE_STYLE_USAGE(.BOTH.,#288383); +#288383 = SURFACE_SIDE_STYLE('',(#288384)); +#288384 = SURFACE_STYLE_FILL_AREA(#288385); +#288385 = FILL_AREA_STYLE('',(#288386)); +#288386 = FILL_AREA_STYLE_COLOUR('',#270350); +#288387 = CURVE_STYLE('',#288388,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288389 = STYLED_ITEM('color',(#288390),#22896); +#288390 = PRESENTATION_STYLE_ASSIGNMENT((#288391,#288396)); +#288391 = SURFACE_STYLE_USAGE(.BOTH.,#288392); +#288392 = SURFACE_SIDE_STYLE('',(#288393)); +#288393 = SURFACE_STYLE_FILL_AREA(#288394); +#288394 = FILL_AREA_STYLE('',(#288395)); +#288395 = FILL_AREA_STYLE_COLOUR('',#270350); +#288396 = CURVE_STYLE('',#288397,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288398 = STYLED_ITEM('color',(#288399),#22927); +#288399 = PRESENTATION_STYLE_ASSIGNMENT((#288400,#288405)); +#288400 = SURFACE_STYLE_USAGE(.BOTH.,#288401); +#288401 = SURFACE_SIDE_STYLE('',(#288402)); +#288402 = SURFACE_STYLE_FILL_AREA(#288403); +#288403 = FILL_AREA_STYLE('',(#288404)); +#288404 = FILL_AREA_STYLE_COLOUR('',#270350); +#288405 = CURVE_STYLE('',#288406,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288407 = STYLED_ITEM('color',(#288408),#22951); +#288408 = PRESENTATION_STYLE_ASSIGNMENT((#288409,#288414)); +#288409 = SURFACE_STYLE_USAGE(.BOTH.,#288410); +#288410 = SURFACE_SIDE_STYLE('',(#288411)); +#288411 = SURFACE_STYLE_FILL_AREA(#288412); +#288412 = FILL_AREA_STYLE('',(#288413)); +#288413 = FILL_AREA_STYLE_COLOUR('',#270350); +#288414 = CURVE_STYLE('',#288415,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288416 = STYLED_ITEM('color',(#288417),#22975); +#288417 = PRESENTATION_STYLE_ASSIGNMENT((#288418,#288423)); +#288418 = SURFACE_STYLE_USAGE(.BOTH.,#288419); +#288419 = SURFACE_SIDE_STYLE('',(#288420)); +#288420 = SURFACE_STYLE_FILL_AREA(#288421); +#288421 = FILL_AREA_STYLE('',(#288422)); +#288422 = FILL_AREA_STYLE_COLOUR('',#270350); +#288423 = CURVE_STYLE('',#288424,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288425 = STYLED_ITEM('color',(#288426),#22992); +#288426 = PRESENTATION_STYLE_ASSIGNMENT((#288427,#288432)); +#288427 = SURFACE_STYLE_USAGE(.BOTH.,#288428); +#288428 = SURFACE_SIDE_STYLE('',(#288429)); +#288429 = SURFACE_STYLE_FILL_AREA(#288430); +#288430 = FILL_AREA_STYLE('',(#288431)); +#288431 = FILL_AREA_STYLE_COLOUR('',#270350); +#288432 = CURVE_STYLE('',#288433,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288434 = STYLED_ITEM('color',(#288435),#23023); +#288435 = PRESENTATION_STYLE_ASSIGNMENT((#288436,#288441)); +#288436 = SURFACE_STYLE_USAGE(.BOTH.,#288437); +#288437 = SURFACE_SIDE_STYLE('',(#288438)); +#288438 = SURFACE_STYLE_FILL_AREA(#288439); +#288439 = FILL_AREA_STYLE('',(#288440)); +#288440 = FILL_AREA_STYLE_COLOUR('',#270350); +#288441 = CURVE_STYLE('',#288442,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288443 = STYLED_ITEM('color',(#288444),#23047); +#288444 = PRESENTATION_STYLE_ASSIGNMENT((#288445,#288450)); +#288445 = SURFACE_STYLE_USAGE(.BOTH.,#288446); +#288446 = SURFACE_SIDE_STYLE('',(#288447)); +#288447 = SURFACE_STYLE_FILL_AREA(#288448); +#288448 = FILL_AREA_STYLE('',(#288449)); +#288449 = FILL_AREA_STYLE_COLOUR('',#270350); +#288450 = CURVE_STYLE('',#288451,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288452 = STYLED_ITEM('color',(#288453),#23071); +#288453 = PRESENTATION_STYLE_ASSIGNMENT((#288454,#288459)); +#288454 = SURFACE_STYLE_USAGE(.BOTH.,#288455); +#288455 = SURFACE_SIDE_STYLE('',(#288456)); +#288456 = SURFACE_STYLE_FILL_AREA(#288457); +#288457 = FILL_AREA_STYLE('',(#288458)); +#288458 = FILL_AREA_STYLE_COLOUR('',#270350); +#288459 = CURVE_STYLE('',#288460,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288461 = STYLED_ITEM('color',(#288462),#23088); +#288462 = PRESENTATION_STYLE_ASSIGNMENT((#288463,#288468)); +#288463 = SURFACE_STYLE_USAGE(.BOTH.,#288464); +#288464 = SURFACE_SIDE_STYLE('',(#288465)); +#288465 = SURFACE_STYLE_FILL_AREA(#288466); +#288466 = FILL_AREA_STYLE('',(#288467)); +#288467 = FILL_AREA_STYLE_COLOUR('',#270350); +#288468 = CURVE_STYLE('',#288469,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288470 = STYLED_ITEM('color',(#288471),#23119); +#288471 = PRESENTATION_STYLE_ASSIGNMENT((#288472,#288477)); +#288472 = SURFACE_STYLE_USAGE(.BOTH.,#288473); +#288473 = SURFACE_SIDE_STYLE('',(#288474)); +#288474 = SURFACE_STYLE_FILL_AREA(#288475); +#288475 = FILL_AREA_STYLE('',(#288476)); +#288476 = FILL_AREA_STYLE_COLOUR('',#270350); +#288477 = CURVE_STYLE('',#288478,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288479 = STYLED_ITEM('color',(#288480),#23143); +#288480 = PRESENTATION_STYLE_ASSIGNMENT((#288481,#288486)); +#288481 = SURFACE_STYLE_USAGE(.BOTH.,#288482); +#288482 = SURFACE_SIDE_STYLE('',(#288483)); +#288483 = SURFACE_STYLE_FILL_AREA(#288484); +#288484 = FILL_AREA_STYLE('',(#288485)); +#288485 = FILL_AREA_STYLE_COLOUR('',#270350); +#288486 = CURVE_STYLE('',#288487,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288488 = STYLED_ITEM('color',(#288489),#23167); +#288489 = PRESENTATION_STYLE_ASSIGNMENT((#288490,#288495)); +#288490 = SURFACE_STYLE_USAGE(.BOTH.,#288491); +#288491 = SURFACE_SIDE_STYLE('',(#288492)); +#288492 = SURFACE_STYLE_FILL_AREA(#288493); +#288493 = FILL_AREA_STYLE('',(#288494)); +#288494 = FILL_AREA_STYLE_COLOUR('',#270350); +#288495 = CURVE_STYLE('',#288496,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288497 = STYLED_ITEM('color',(#288498),#23184); +#288498 = PRESENTATION_STYLE_ASSIGNMENT((#288499,#288504)); +#288499 = SURFACE_STYLE_USAGE(.BOTH.,#288500); +#288500 = SURFACE_SIDE_STYLE('',(#288501)); +#288501 = SURFACE_STYLE_FILL_AREA(#288502); +#288502 = FILL_AREA_STYLE('',(#288503)); +#288503 = FILL_AREA_STYLE_COLOUR('',#270350); +#288504 = CURVE_STYLE('',#288505,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288506 = STYLED_ITEM('color',(#288507),#23215); +#288507 = PRESENTATION_STYLE_ASSIGNMENT((#288508,#288513)); +#288508 = SURFACE_STYLE_USAGE(.BOTH.,#288509); +#288509 = SURFACE_SIDE_STYLE('',(#288510)); +#288510 = SURFACE_STYLE_FILL_AREA(#288511); +#288511 = FILL_AREA_STYLE('',(#288512)); +#288512 = FILL_AREA_STYLE_COLOUR('',#270350); +#288513 = CURVE_STYLE('',#288514,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288515 = STYLED_ITEM('color',(#288516),#23239); +#288516 = PRESENTATION_STYLE_ASSIGNMENT((#288517,#288522)); +#288517 = SURFACE_STYLE_USAGE(.BOTH.,#288518); +#288518 = SURFACE_SIDE_STYLE('',(#288519)); +#288519 = SURFACE_STYLE_FILL_AREA(#288520); +#288520 = FILL_AREA_STYLE('',(#288521)); +#288521 = FILL_AREA_STYLE_COLOUR('',#270350); +#288522 = CURVE_STYLE('',#288523,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288524 = STYLED_ITEM('color',(#288525),#23263); +#288525 = PRESENTATION_STYLE_ASSIGNMENT((#288526,#288531)); +#288526 = SURFACE_STYLE_USAGE(.BOTH.,#288527); +#288527 = SURFACE_SIDE_STYLE('',(#288528)); +#288528 = SURFACE_STYLE_FILL_AREA(#288529); +#288529 = FILL_AREA_STYLE('',(#288530)); +#288530 = FILL_AREA_STYLE_COLOUR('',#270350); +#288531 = CURVE_STYLE('',#288532,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288533 = STYLED_ITEM('color',(#288534),#23280); +#288534 = PRESENTATION_STYLE_ASSIGNMENT((#288535,#288540)); +#288535 = SURFACE_STYLE_USAGE(.BOTH.,#288536); +#288536 = SURFACE_SIDE_STYLE('',(#288537)); +#288537 = SURFACE_STYLE_FILL_AREA(#288538); +#288538 = FILL_AREA_STYLE('',(#288539)); +#288539 = FILL_AREA_STYLE_COLOUR('',#270350); +#288540 = CURVE_STYLE('',#288541,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288542 = STYLED_ITEM('color',(#288543),#23311); +#288543 = PRESENTATION_STYLE_ASSIGNMENT((#288544,#288549)); +#288544 = SURFACE_STYLE_USAGE(.BOTH.,#288545); +#288545 = SURFACE_SIDE_STYLE('',(#288546)); +#288546 = SURFACE_STYLE_FILL_AREA(#288547); +#288547 = FILL_AREA_STYLE('',(#288548)); +#288548 = FILL_AREA_STYLE_COLOUR('',#270350); +#288549 = CURVE_STYLE('',#288550,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288551 = STYLED_ITEM('color',(#288552),#23335); +#288552 = PRESENTATION_STYLE_ASSIGNMENT((#288553,#288558)); +#288553 = SURFACE_STYLE_USAGE(.BOTH.,#288554); +#288554 = SURFACE_SIDE_STYLE('',(#288555)); +#288555 = SURFACE_STYLE_FILL_AREA(#288556); +#288556 = FILL_AREA_STYLE('',(#288557)); +#288557 = FILL_AREA_STYLE_COLOUR('',#270350); +#288558 = CURVE_STYLE('',#288559,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288560 = STYLED_ITEM('color',(#288561),#23359); +#288561 = PRESENTATION_STYLE_ASSIGNMENT((#288562,#288567)); +#288562 = SURFACE_STYLE_USAGE(.BOTH.,#288563); +#288563 = SURFACE_SIDE_STYLE('',(#288564)); +#288564 = SURFACE_STYLE_FILL_AREA(#288565); +#288565 = FILL_AREA_STYLE('',(#288566)); +#288566 = FILL_AREA_STYLE_COLOUR('',#270350); +#288567 = CURVE_STYLE('',#288568,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288568 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288569 = STYLED_ITEM('color',(#288570),#23376); +#288570 = PRESENTATION_STYLE_ASSIGNMENT((#288571,#288576)); +#288571 = SURFACE_STYLE_USAGE(.BOTH.,#288572); +#288572 = SURFACE_SIDE_STYLE('',(#288573)); +#288573 = SURFACE_STYLE_FILL_AREA(#288574); +#288574 = FILL_AREA_STYLE('',(#288575)); +#288575 = FILL_AREA_STYLE_COLOUR('',#270350); +#288576 = CURVE_STYLE('',#288577,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288578 = STYLED_ITEM('color',(#288579),#23407); +#288579 = PRESENTATION_STYLE_ASSIGNMENT((#288580,#288585)); +#288580 = SURFACE_STYLE_USAGE(.BOTH.,#288581); +#288581 = SURFACE_SIDE_STYLE('',(#288582)); +#288582 = SURFACE_STYLE_FILL_AREA(#288583); +#288583 = FILL_AREA_STYLE('',(#288584)); +#288584 = FILL_AREA_STYLE_COLOUR('',#270350); +#288585 = CURVE_STYLE('',#288586,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288587 = STYLED_ITEM('color',(#288588),#23431); +#288588 = PRESENTATION_STYLE_ASSIGNMENT((#288589,#288594)); +#288589 = SURFACE_STYLE_USAGE(.BOTH.,#288590); +#288590 = SURFACE_SIDE_STYLE('',(#288591)); +#288591 = SURFACE_STYLE_FILL_AREA(#288592); +#288592 = FILL_AREA_STYLE('',(#288593)); +#288593 = FILL_AREA_STYLE_COLOUR('',#270350); +#288594 = CURVE_STYLE('',#288595,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288596 = STYLED_ITEM('color',(#288597),#23455); +#288597 = PRESENTATION_STYLE_ASSIGNMENT((#288598,#288603)); +#288598 = SURFACE_STYLE_USAGE(.BOTH.,#288599); +#288599 = SURFACE_SIDE_STYLE('',(#288600)); +#288600 = SURFACE_STYLE_FILL_AREA(#288601); +#288601 = FILL_AREA_STYLE('',(#288602)); +#288602 = FILL_AREA_STYLE_COLOUR('',#270350); +#288603 = CURVE_STYLE('',#288604,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288605 = STYLED_ITEM('color',(#288606),#23472); +#288606 = PRESENTATION_STYLE_ASSIGNMENT((#288607,#288612)); +#288607 = SURFACE_STYLE_USAGE(.BOTH.,#288608); +#288608 = SURFACE_SIDE_STYLE('',(#288609)); +#288609 = SURFACE_STYLE_FILL_AREA(#288610); +#288610 = FILL_AREA_STYLE('',(#288611)); +#288611 = FILL_AREA_STYLE_COLOUR('',#270350); +#288612 = CURVE_STYLE('',#288613,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288613 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288614 = STYLED_ITEM('color',(#288615),#23503); +#288615 = PRESENTATION_STYLE_ASSIGNMENT((#288616,#288621)); +#288616 = SURFACE_STYLE_USAGE(.BOTH.,#288617); +#288617 = SURFACE_SIDE_STYLE('',(#288618)); +#288618 = SURFACE_STYLE_FILL_AREA(#288619); +#288619 = FILL_AREA_STYLE('',(#288620)); +#288620 = FILL_AREA_STYLE_COLOUR('',#270350); +#288621 = CURVE_STYLE('',#288622,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288622 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288623 = STYLED_ITEM('color',(#288624),#23527); +#288624 = PRESENTATION_STYLE_ASSIGNMENT((#288625,#288630)); +#288625 = SURFACE_STYLE_USAGE(.BOTH.,#288626); +#288626 = SURFACE_SIDE_STYLE('',(#288627)); +#288627 = SURFACE_STYLE_FILL_AREA(#288628); +#288628 = FILL_AREA_STYLE('',(#288629)); +#288629 = FILL_AREA_STYLE_COLOUR('',#270350); +#288630 = CURVE_STYLE('',#288631,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288631 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288632 = STYLED_ITEM('color',(#288633),#23551); +#288633 = PRESENTATION_STYLE_ASSIGNMENT((#288634,#288639)); +#288634 = SURFACE_STYLE_USAGE(.BOTH.,#288635); +#288635 = SURFACE_SIDE_STYLE('',(#288636)); +#288636 = SURFACE_STYLE_FILL_AREA(#288637); +#288637 = FILL_AREA_STYLE('',(#288638)); +#288638 = FILL_AREA_STYLE_COLOUR('',#270350); +#288639 = CURVE_STYLE('',#288640,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288641 = STYLED_ITEM('color',(#288642),#23568); +#288642 = PRESENTATION_STYLE_ASSIGNMENT((#288643,#288648)); +#288643 = SURFACE_STYLE_USAGE(.BOTH.,#288644); +#288644 = SURFACE_SIDE_STYLE('',(#288645)); +#288645 = SURFACE_STYLE_FILL_AREA(#288646); +#288646 = FILL_AREA_STYLE('',(#288647)); +#288647 = FILL_AREA_STYLE_COLOUR('',#270350); +#288648 = CURVE_STYLE('',#288649,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288649 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288650 = STYLED_ITEM('color',(#288651),#23599); +#288651 = PRESENTATION_STYLE_ASSIGNMENT((#288652,#288657)); +#288652 = SURFACE_STYLE_USAGE(.BOTH.,#288653); +#288653 = SURFACE_SIDE_STYLE('',(#288654)); +#288654 = SURFACE_STYLE_FILL_AREA(#288655); +#288655 = FILL_AREA_STYLE('',(#288656)); +#288656 = FILL_AREA_STYLE_COLOUR('',#270350); +#288657 = CURVE_STYLE('',#288658,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288658 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288659 = STYLED_ITEM('color',(#288660),#23623); +#288660 = PRESENTATION_STYLE_ASSIGNMENT((#288661,#288666)); +#288661 = SURFACE_STYLE_USAGE(.BOTH.,#288662); +#288662 = SURFACE_SIDE_STYLE('',(#288663)); +#288663 = SURFACE_STYLE_FILL_AREA(#288664); +#288664 = FILL_AREA_STYLE('',(#288665)); +#288665 = FILL_AREA_STYLE_COLOUR('',#270350); +#288666 = CURVE_STYLE('',#288667,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288667 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288668 = STYLED_ITEM('color',(#288669),#23647); +#288669 = PRESENTATION_STYLE_ASSIGNMENT((#288670,#288675)); +#288670 = SURFACE_STYLE_USAGE(.BOTH.,#288671); +#288671 = SURFACE_SIDE_STYLE('',(#288672)); +#288672 = SURFACE_STYLE_FILL_AREA(#288673); +#288673 = FILL_AREA_STYLE('',(#288674)); +#288674 = FILL_AREA_STYLE_COLOUR('',#270350); +#288675 = CURVE_STYLE('',#288676,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288676 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288677 = STYLED_ITEM('color',(#288678),#23664); +#288678 = PRESENTATION_STYLE_ASSIGNMENT((#288679,#288684)); +#288679 = SURFACE_STYLE_USAGE(.BOTH.,#288680); +#288680 = SURFACE_SIDE_STYLE('',(#288681)); +#288681 = SURFACE_STYLE_FILL_AREA(#288682); +#288682 = FILL_AREA_STYLE('',(#288683)); +#288683 = FILL_AREA_STYLE_COLOUR('',#270350); +#288684 = CURVE_STYLE('',#288685,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288685 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288686 = STYLED_ITEM('color',(#288687),#23695); +#288687 = PRESENTATION_STYLE_ASSIGNMENT((#288688,#288693)); +#288688 = SURFACE_STYLE_USAGE(.BOTH.,#288689); +#288689 = SURFACE_SIDE_STYLE('',(#288690)); +#288690 = SURFACE_STYLE_FILL_AREA(#288691); +#288691 = FILL_AREA_STYLE('',(#288692)); +#288692 = FILL_AREA_STYLE_COLOUR('',#270350); +#288693 = CURVE_STYLE('',#288694,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288694 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288695 = STYLED_ITEM('color',(#288696),#23719); +#288696 = PRESENTATION_STYLE_ASSIGNMENT((#288697,#288702)); +#288697 = SURFACE_STYLE_USAGE(.BOTH.,#288698); +#288698 = SURFACE_SIDE_STYLE('',(#288699)); +#288699 = SURFACE_STYLE_FILL_AREA(#288700); +#288700 = FILL_AREA_STYLE('',(#288701)); +#288701 = FILL_AREA_STYLE_COLOUR('',#270350); +#288702 = CURVE_STYLE('',#288703,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288703 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288704 = STYLED_ITEM('color',(#288705),#23743); +#288705 = PRESENTATION_STYLE_ASSIGNMENT((#288706,#288711)); +#288706 = SURFACE_STYLE_USAGE(.BOTH.,#288707); +#288707 = SURFACE_SIDE_STYLE('',(#288708)); +#288708 = SURFACE_STYLE_FILL_AREA(#288709); +#288709 = FILL_AREA_STYLE('',(#288710)); +#288710 = FILL_AREA_STYLE_COLOUR('',#270350); +#288711 = CURVE_STYLE('',#288712,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288712 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288713 = STYLED_ITEM('color',(#288714),#23760); +#288714 = PRESENTATION_STYLE_ASSIGNMENT((#288715,#288720)); +#288715 = SURFACE_STYLE_USAGE(.BOTH.,#288716); +#288716 = SURFACE_SIDE_STYLE('',(#288717)); +#288717 = SURFACE_STYLE_FILL_AREA(#288718); +#288718 = FILL_AREA_STYLE('',(#288719)); +#288719 = FILL_AREA_STYLE_COLOUR('',#270350); +#288720 = CURVE_STYLE('',#288721,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288721 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288722 = STYLED_ITEM('color',(#288723),#23791); +#288723 = PRESENTATION_STYLE_ASSIGNMENT((#288724,#288729)); +#288724 = SURFACE_STYLE_USAGE(.BOTH.,#288725); +#288725 = SURFACE_SIDE_STYLE('',(#288726)); +#288726 = SURFACE_STYLE_FILL_AREA(#288727); +#288727 = FILL_AREA_STYLE('',(#288728)); +#288728 = FILL_AREA_STYLE_COLOUR('',#270350); +#288729 = CURVE_STYLE('',#288730,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288730 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288731 = STYLED_ITEM('color',(#288732),#23815); +#288732 = PRESENTATION_STYLE_ASSIGNMENT((#288733,#288738)); +#288733 = SURFACE_STYLE_USAGE(.BOTH.,#288734); +#288734 = SURFACE_SIDE_STYLE('',(#288735)); +#288735 = SURFACE_STYLE_FILL_AREA(#288736); +#288736 = FILL_AREA_STYLE('',(#288737)); +#288737 = FILL_AREA_STYLE_COLOUR('',#270350); +#288738 = CURVE_STYLE('',#288739,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288739 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288740 = STYLED_ITEM('color',(#288741),#23839); +#288741 = PRESENTATION_STYLE_ASSIGNMENT((#288742,#288747)); +#288742 = SURFACE_STYLE_USAGE(.BOTH.,#288743); +#288743 = SURFACE_SIDE_STYLE('',(#288744)); +#288744 = SURFACE_STYLE_FILL_AREA(#288745); +#288745 = FILL_AREA_STYLE('',(#288746)); +#288746 = FILL_AREA_STYLE_COLOUR('',#270350); +#288747 = CURVE_STYLE('',#288748,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288748 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288749 = STYLED_ITEM('color',(#288750),#23856); +#288750 = PRESENTATION_STYLE_ASSIGNMENT((#288751,#288756)); +#288751 = SURFACE_STYLE_USAGE(.BOTH.,#288752); +#288752 = SURFACE_SIDE_STYLE('',(#288753)); +#288753 = SURFACE_STYLE_FILL_AREA(#288754); +#288754 = FILL_AREA_STYLE('',(#288755)); +#288755 = FILL_AREA_STYLE_COLOUR('',#270350); +#288756 = CURVE_STYLE('',#288757,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288757 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288758 = STYLED_ITEM('color',(#288759),#23887); +#288759 = PRESENTATION_STYLE_ASSIGNMENT((#288760,#288765)); +#288760 = SURFACE_STYLE_USAGE(.BOTH.,#288761); +#288761 = SURFACE_SIDE_STYLE('',(#288762)); +#288762 = SURFACE_STYLE_FILL_AREA(#288763); +#288763 = FILL_AREA_STYLE('',(#288764)); +#288764 = FILL_AREA_STYLE_COLOUR('',#270350); +#288765 = CURVE_STYLE('',#288766,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288766 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288767 = STYLED_ITEM('color',(#288768),#23911); +#288768 = PRESENTATION_STYLE_ASSIGNMENT((#288769,#288774)); +#288769 = SURFACE_STYLE_USAGE(.BOTH.,#288770); +#288770 = SURFACE_SIDE_STYLE('',(#288771)); +#288771 = SURFACE_STYLE_FILL_AREA(#288772); +#288772 = FILL_AREA_STYLE('',(#288773)); +#288773 = FILL_AREA_STYLE_COLOUR('',#270350); +#288774 = CURVE_STYLE('',#288775,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288775 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288776 = STYLED_ITEM('color',(#288777),#23935); +#288777 = PRESENTATION_STYLE_ASSIGNMENT((#288778,#288783)); +#288778 = SURFACE_STYLE_USAGE(.BOTH.,#288779); +#288779 = SURFACE_SIDE_STYLE('',(#288780)); +#288780 = SURFACE_STYLE_FILL_AREA(#288781); +#288781 = FILL_AREA_STYLE('',(#288782)); +#288782 = FILL_AREA_STYLE_COLOUR('',#270350); +#288783 = CURVE_STYLE('',#288784,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288784 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288785 = STYLED_ITEM('color',(#288786),#23952); +#288786 = PRESENTATION_STYLE_ASSIGNMENT((#288787,#288792)); +#288787 = SURFACE_STYLE_USAGE(.BOTH.,#288788); +#288788 = SURFACE_SIDE_STYLE('',(#288789)); +#288789 = SURFACE_STYLE_FILL_AREA(#288790); +#288790 = FILL_AREA_STYLE('',(#288791)); +#288791 = FILL_AREA_STYLE_COLOUR('',#270350); +#288792 = CURVE_STYLE('',#288793,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288793 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288794 = STYLED_ITEM('color',(#288795),#23983); +#288795 = PRESENTATION_STYLE_ASSIGNMENT((#288796,#288801)); +#288796 = SURFACE_STYLE_USAGE(.BOTH.,#288797); +#288797 = SURFACE_SIDE_STYLE('',(#288798)); +#288798 = SURFACE_STYLE_FILL_AREA(#288799); +#288799 = FILL_AREA_STYLE('',(#288800)); +#288800 = FILL_AREA_STYLE_COLOUR('',#270350); +#288801 = CURVE_STYLE('',#288802,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288802 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288803 = STYLED_ITEM('color',(#288804),#24007); +#288804 = PRESENTATION_STYLE_ASSIGNMENT((#288805,#288810)); +#288805 = SURFACE_STYLE_USAGE(.BOTH.,#288806); +#288806 = SURFACE_SIDE_STYLE('',(#288807)); +#288807 = SURFACE_STYLE_FILL_AREA(#288808); +#288808 = FILL_AREA_STYLE('',(#288809)); +#288809 = FILL_AREA_STYLE_COLOUR('',#270350); +#288810 = CURVE_STYLE('',#288811,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288811 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288812 = STYLED_ITEM('color',(#288813),#24031); +#288813 = PRESENTATION_STYLE_ASSIGNMENT((#288814,#288819)); +#288814 = SURFACE_STYLE_USAGE(.BOTH.,#288815); +#288815 = SURFACE_SIDE_STYLE('',(#288816)); +#288816 = SURFACE_STYLE_FILL_AREA(#288817); +#288817 = FILL_AREA_STYLE('',(#288818)); +#288818 = FILL_AREA_STYLE_COLOUR('',#270350); +#288819 = CURVE_STYLE('',#288820,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288820 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288821 = STYLED_ITEM('color',(#288822),#24048); +#288822 = PRESENTATION_STYLE_ASSIGNMENT((#288823,#288828)); +#288823 = SURFACE_STYLE_USAGE(.BOTH.,#288824); +#288824 = SURFACE_SIDE_STYLE('',(#288825)); +#288825 = SURFACE_STYLE_FILL_AREA(#288826); +#288826 = FILL_AREA_STYLE('',(#288827)); +#288827 = FILL_AREA_STYLE_COLOUR('',#270350); +#288828 = CURVE_STYLE('',#288829,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288829 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288830 = STYLED_ITEM('color',(#288831),#24079); +#288831 = PRESENTATION_STYLE_ASSIGNMENT((#288832,#288837)); +#288832 = SURFACE_STYLE_USAGE(.BOTH.,#288833); +#288833 = SURFACE_SIDE_STYLE('',(#288834)); +#288834 = SURFACE_STYLE_FILL_AREA(#288835); +#288835 = FILL_AREA_STYLE('',(#288836)); +#288836 = FILL_AREA_STYLE_COLOUR('',#270350); +#288837 = CURVE_STYLE('',#288838,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288838 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288839 = STYLED_ITEM('color',(#288840),#24103); +#288840 = PRESENTATION_STYLE_ASSIGNMENT((#288841,#288846)); +#288841 = SURFACE_STYLE_USAGE(.BOTH.,#288842); +#288842 = SURFACE_SIDE_STYLE('',(#288843)); +#288843 = SURFACE_STYLE_FILL_AREA(#288844); +#288844 = FILL_AREA_STYLE('',(#288845)); +#288845 = FILL_AREA_STYLE_COLOUR('',#270350); +#288846 = CURVE_STYLE('',#288847,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288847 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288848 = STYLED_ITEM('color',(#288849),#24127); +#288849 = PRESENTATION_STYLE_ASSIGNMENT((#288850,#288855)); +#288850 = SURFACE_STYLE_USAGE(.BOTH.,#288851); +#288851 = SURFACE_SIDE_STYLE('',(#288852)); +#288852 = SURFACE_STYLE_FILL_AREA(#288853); +#288853 = FILL_AREA_STYLE('',(#288854)); +#288854 = FILL_AREA_STYLE_COLOUR('',#270350); +#288855 = CURVE_STYLE('',#288856,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288856 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288857 = STYLED_ITEM('color',(#288858),#24144); +#288858 = PRESENTATION_STYLE_ASSIGNMENT((#288859,#288864)); +#288859 = SURFACE_STYLE_USAGE(.BOTH.,#288860); +#288860 = SURFACE_SIDE_STYLE('',(#288861)); +#288861 = SURFACE_STYLE_FILL_AREA(#288862); +#288862 = FILL_AREA_STYLE('',(#288863)); +#288863 = FILL_AREA_STYLE_COLOUR('',#270350); +#288864 = CURVE_STYLE('',#288865,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288865 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288866 = STYLED_ITEM('color',(#288867),#24175); +#288867 = PRESENTATION_STYLE_ASSIGNMENT((#288868,#288873)); +#288868 = SURFACE_STYLE_USAGE(.BOTH.,#288869); +#288869 = SURFACE_SIDE_STYLE('',(#288870)); +#288870 = SURFACE_STYLE_FILL_AREA(#288871); +#288871 = FILL_AREA_STYLE('',(#288872)); +#288872 = FILL_AREA_STYLE_COLOUR('',#270350); +#288873 = CURVE_STYLE('',#288874,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288874 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288875 = STYLED_ITEM('color',(#288876),#24199); +#288876 = PRESENTATION_STYLE_ASSIGNMENT((#288877,#288882)); +#288877 = SURFACE_STYLE_USAGE(.BOTH.,#288878); +#288878 = SURFACE_SIDE_STYLE('',(#288879)); +#288879 = SURFACE_STYLE_FILL_AREA(#288880); +#288880 = FILL_AREA_STYLE('',(#288881)); +#288881 = FILL_AREA_STYLE_COLOUR('',#270350); +#288882 = CURVE_STYLE('',#288883,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288883 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288884 = STYLED_ITEM('color',(#288885),#24223); +#288885 = PRESENTATION_STYLE_ASSIGNMENT((#288886,#288891)); +#288886 = SURFACE_STYLE_USAGE(.BOTH.,#288887); +#288887 = SURFACE_SIDE_STYLE('',(#288888)); +#288888 = SURFACE_STYLE_FILL_AREA(#288889); +#288889 = FILL_AREA_STYLE('',(#288890)); +#288890 = FILL_AREA_STYLE_COLOUR('',#270350); +#288891 = CURVE_STYLE('',#288892,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288892 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288893 = STYLED_ITEM('color',(#288894),#24240); +#288894 = PRESENTATION_STYLE_ASSIGNMENT((#288895,#288900)); +#288895 = SURFACE_STYLE_USAGE(.BOTH.,#288896); +#288896 = SURFACE_SIDE_STYLE('',(#288897)); +#288897 = SURFACE_STYLE_FILL_AREA(#288898); +#288898 = FILL_AREA_STYLE('',(#288899)); +#288899 = FILL_AREA_STYLE_COLOUR('',#270350); +#288900 = CURVE_STYLE('',#288901,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288901 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288902 = STYLED_ITEM('color',(#288903),#24271); +#288903 = PRESENTATION_STYLE_ASSIGNMENT((#288904,#288909)); +#288904 = SURFACE_STYLE_USAGE(.BOTH.,#288905); +#288905 = SURFACE_SIDE_STYLE('',(#288906)); +#288906 = SURFACE_STYLE_FILL_AREA(#288907); +#288907 = FILL_AREA_STYLE('',(#288908)); +#288908 = FILL_AREA_STYLE_COLOUR('',#270350); +#288909 = CURVE_STYLE('',#288910,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288910 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288911 = STYLED_ITEM('color',(#288912),#24295); +#288912 = PRESENTATION_STYLE_ASSIGNMENT((#288913,#288918)); +#288913 = SURFACE_STYLE_USAGE(.BOTH.,#288914); +#288914 = SURFACE_SIDE_STYLE('',(#288915)); +#288915 = SURFACE_STYLE_FILL_AREA(#288916); +#288916 = FILL_AREA_STYLE('',(#288917)); +#288917 = FILL_AREA_STYLE_COLOUR('',#270350); +#288918 = CURVE_STYLE('',#288919,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288919 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288920 = STYLED_ITEM('color',(#288921),#24319); +#288921 = PRESENTATION_STYLE_ASSIGNMENT((#288922,#288927)); +#288922 = SURFACE_STYLE_USAGE(.BOTH.,#288923); +#288923 = SURFACE_SIDE_STYLE('',(#288924)); +#288924 = SURFACE_STYLE_FILL_AREA(#288925); +#288925 = FILL_AREA_STYLE('',(#288926)); +#288926 = FILL_AREA_STYLE_COLOUR('',#270350); +#288927 = CURVE_STYLE('',#288928,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288928 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288929 = STYLED_ITEM('color',(#288930),#24336); +#288930 = PRESENTATION_STYLE_ASSIGNMENT((#288931,#288936)); +#288931 = SURFACE_STYLE_USAGE(.BOTH.,#288932); +#288932 = SURFACE_SIDE_STYLE('',(#288933)); +#288933 = SURFACE_STYLE_FILL_AREA(#288934); +#288934 = FILL_AREA_STYLE('',(#288935)); +#288935 = FILL_AREA_STYLE_COLOUR('',#270350); +#288936 = CURVE_STYLE('',#288937,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288937 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288938 = STYLED_ITEM('color',(#288939),#24367); +#288939 = PRESENTATION_STYLE_ASSIGNMENT((#288940,#288945)); +#288940 = SURFACE_STYLE_USAGE(.BOTH.,#288941); +#288941 = SURFACE_SIDE_STYLE('',(#288942)); +#288942 = SURFACE_STYLE_FILL_AREA(#288943); +#288943 = FILL_AREA_STYLE('',(#288944)); +#288944 = FILL_AREA_STYLE_COLOUR('',#270350); +#288945 = CURVE_STYLE('',#288946,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288946 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288947 = STYLED_ITEM('color',(#288948),#24391); +#288948 = PRESENTATION_STYLE_ASSIGNMENT((#288949,#288954)); +#288949 = SURFACE_STYLE_USAGE(.BOTH.,#288950); +#288950 = SURFACE_SIDE_STYLE('',(#288951)); +#288951 = SURFACE_STYLE_FILL_AREA(#288952); +#288952 = FILL_AREA_STYLE('',(#288953)); +#288953 = FILL_AREA_STYLE_COLOUR('',#270350); +#288954 = CURVE_STYLE('',#288955,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288955 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288956 = STYLED_ITEM('color',(#288957),#24415); +#288957 = PRESENTATION_STYLE_ASSIGNMENT((#288958,#288963)); +#288958 = SURFACE_STYLE_USAGE(.BOTH.,#288959); +#288959 = SURFACE_SIDE_STYLE('',(#288960)); +#288960 = SURFACE_STYLE_FILL_AREA(#288961); +#288961 = FILL_AREA_STYLE('',(#288962)); +#288962 = FILL_AREA_STYLE_COLOUR('',#270350); +#288963 = CURVE_STYLE('',#288964,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288964 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288965 = STYLED_ITEM('color',(#288966),#24432); +#288966 = PRESENTATION_STYLE_ASSIGNMENT((#288967,#288972)); +#288967 = SURFACE_STYLE_USAGE(.BOTH.,#288968); +#288968 = SURFACE_SIDE_STYLE('',(#288969)); +#288969 = SURFACE_STYLE_FILL_AREA(#288970); +#288970 = FILL_AREA_STYLE('',(#288971)); +#288971 = FILL_AREA_STYLE_COLOUR('',#270350); +#288972 = CURVE_STYLE('',#288973,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288973 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288974 = STYLED_ITEM('color',(#288975),#24463); +#288975 = PRESENTATION_STYLE_ASSIGNMENT((#288976,#288981)); +#288976 = SURFACE_STYLE_USAGE(.BOTH.,#288977); +#288977 = SURFACE_SIDE_STYLE('',(#288978)); +#288978 = SURFACE_STYLE_FILL_AREA(#288979); +#288979 = FILL_AREA_STYLE('',(#288980)); +#288980 = FILL_AREA_STYLE_COLOUR('',#270350); +#288981 = CURVE_STYLE('',#288982,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288982 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288983 = STYLED_ITEM('color',(#288984),#24487); +#288984 = PRESENTATION_STYLE_ASSIGNMENT((#288985,#288990)); +#288985 = SURFACE_STYLE_USAGE(.BOTH.,#288986); +#288986 = SURFACE_SIDE_STYLE('',(#288987)); +#288987 = SURFACE_STYLE_FILL_AREA(#288988); +#288988 = FILL_AREA_STYLE('',(#288989)); +#288989 = FILL_AREA_STYLE_COLOUR('',#270350); +#288990 = CURVE_STYLE('',#288991,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#288991 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#288992 = STYLED_ITEM('color',(#288993),#24511); +#288993 = PRESENTATION_STYLE_ASSIGNMENT((#288994,#288999)); +#288994 = SURFACE_STYLE_USAGE(.BOTH.,#288995); +#288995 = SURFACE_SIDE_STYLE('',(#288996)); +#288996 = SURFACE_STYLE_FILL_AREA(#288997); +#288997 = FILL_AREA_STYLE('',(#288998)); +#288998 = FILL_AREA_STYLE_COLOUR('',#270350); +#288999 = CURVE_STYLE('',#289000,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289000 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289001 = STYLED_ITEM('color',(#289002),#24528); +#289002 = PRESENTATION_STYLE_ASSIGNMENT((#289003,#289008)); +#289003 = SURFACE_STYLE_USAGE(.BOTH.,#289004); +#289004 = SURFACE_SIDE_STYLE('',(#289005)); +#289005 = SURFACE_STYLE_FILL_AREA(#289006); +#289006 = FILL_AREA_STYLE('',(#289007)); +#289007 = FILL_AREA_STYLE_COLOUR('',#285989); +#289008 = CURVE_STYLE('',#289009,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289009 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289010 = STYLED_ITEM('color',(#289011),#24545); +#289011 = PRESENTATION_STYLE_ASSIGNMENT((#289012,#289017)); +#289012 = SURFACE_STYLE_USAGE(.BOTH.,#289013); +#289013 = SURFACE_SIDE_STYLE('',(#289014)); +#289014 = SURFACE_STYLE_FILL_AREA(#289015); +#289015 = FILL_AREA_STYLE('',(#289016)); +#289016 = FILL_AREA_STYLE_COLOUR('',#285989); +#289017 = CURVE_STYLE('',#289018,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289018 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289019 = STYLED_ITEM('color',(#289020),#24592); +#289020 = PRESENTATION_STYLE_ASSIGNMENT((#289021,#289026)); +#289021 = SURFACE_STYLE_USAGE(.BOTH.,#289022); +#289022 = SURFACE_SIDE_STYLE('',(#289023)); +#289023 = SURFACE_STYLE_FILL_AREA(#289024); +#289024 = FILL_AREA_STYLE('',(#289025)); +#289025 = FILL_AREA_STYLE_COLOUR('',#285989); +#289026 = CURVE_STYLE('',#289027,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289027 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289028 = STYLED_ITEM('color',(#289029),#24609); +#289029 = PRESENTATION_STYLE_ASSIGNMENT((#289030,#289035)); +#289030 = SURFACE_STYLE_USAGE(.BOTH.,#289031); +#289031 = SURFACE_SIDE_STYLE('',(#289032)); +#289032 = SURFACE_STYLE_FILL_AREA(#289033); +#289033 = FILL_AREA_STYLE('',(#289034)); +#289034 = FILL_AREA_STYLE_COLOUR('',#285989); +#289035 = CURVE_STYLE('',#289036,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289036 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289037 = STYLED_ITEM('color',(#289038),#24656); +#289038 = PRESENTATION_STYLE_ASSIGNMENT((#289039,#289044)); +#289039 = SURFACE_STYLE_USAGE(.BOTH.,#289040); +#289040 = SURFACE_SIDE_STYLE('',(#289041)); +#289041 = SURFACE_STYLE_FILL_AREA(#289042); +#289042 = FILL_AREA_STYLE('',(#289043)); +#289043 = FILL_AREA_STYLE_COLOUR('',#285989); +#289044 = CURVE_STYLE('',#289045,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289045 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289046 = STYLED_ITEM('color',(#289047),#24673); +#289047 = PRESENTATION_STYLE_ASSIGNMENT((#289048,#289053)); +#289048 = SURFACE_STYLE_USAGE(.BOTH.,#289049); +#289049 = SURFACE_SIDE_STYLE('',(#289050)); +#289050 = SURFACE_STYLE_FILL_AREA(#289051); +#289051 = FILL_AREA_STYLE('',(#289052)); +#289052 = FILL_AREA_STYLE_COLOUR('',#285989); +#289053 = CURVE_STYLE('',#289054,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289054 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289055 = STYLED_ITEM('color',(#289056),#24720); +#289056 = PRESENTATION_STYLE_ASSIGNMENT((#289057,#289062)); +#289057 = SURFACE_STYLE_USAGE(.BOTH.,#289058); +#289058 = SURFACE_SIDE_STYLE('',(#289059)); +#289059 = SURFACE_STYLE_FILL_AREA(#289060); +#289060 = FILL_AREA_STYLE('',(#289061)); +#289061 = FILL_AREA_STYLE_COLOUR('',#285989); +#289062 = CURVE_STYLE('',#289063,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289063 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289064 = STYLED_ITEM('color',(#289065),#24737); +#289065 = PRESENTATION_STYLE_ASSIGNMENT((#289066,#289071)); +#289066 = SURFACE_STYLE_USAGE(.BOTH.,#289067); +#289067 = SURFACE_SIDE_STYLE('',(#289068)); +#289068 = SURFACE_STYLE_FILL_AREA(#289069); +#289069 = FILL_AREA_STYLE('',(#289070)); +#289070 = FILL_AREA_STYLE_COLOUR('',#285989); +#289071 = CURVE_STYLE('',#289072,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289072 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289073 = STYLED_ITEM('color',(#289074),#24784); +#289074 = PRESENTATION_STYLE_ASSIGNMENT((#289075,#289080)); +#289075 = SURFACE_STYLE_USAGE(.BOTH.,#289076); +#289076 = SURFACE_SIDE_STYLE('',(#289077)); +#289077 = SURFACE_STYLE_FILL_AREA(#289078); +#289078 = FILL_AREA_STYLE('',(#289079)); +#289079 = FILL_AREA_STYLE_COLOUR('',#285989); +#289080 = CURVE_STYLE('',#289081,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289081 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289082 = STYLED_ITEM('color',(#289083),#24801); +#289083 = PRESENTATION_STYLE_ASSIGNMENT((#289084,#289089)); +#289084 = SURFACE_STYLE_USAGE(.BOTH.,#289085); +#289085 = SURFACE_SIDE_STYLE('',(#289086)); +#289086 = SURFACE_STYLE_FILL_AREA(#289087); +#289087 = FILL_AREA_STYLE('',(#289088)); +#289088 = FILL_AREA_STYLE_COLOUR('',#285989); +#289089 = CURVE_STYLE('',#289090,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289090 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289091 = STYLED_ITEM('color',(#289092),#24848); +#289092 = PRESENTATION_STYLE_ASSIGNMENT((#289093,#289098)); +#289093 = SURFACE_STYLE_USAGE(.BOTH.,#289094); +#289094 = SURFACE_SIDE_STYLE('',(#289095)); +#289095 = SURFACE_STYLE_FILL_AREA(#289096); +#289096 = FILL_AREA_STYLE('',(#289097)); +#289097 = FILL_AREA_STYLE_COLOUR('',#285989); +#289098 = CURVE_STYLE('',#289099,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289099 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289100 = STYLED_ITEM('color',(#289101),#24865); +#289101 = PRESENTATION_STYLE_ASSIGNMENT((#289102,#289107)); +#289102 = SURFACE_STYLE_USAGE(.BOTH.,#289103); +#289103 = SURFACE_SIDE_STYLE('',(#289104)); +#289104 = SURFACE_STYLE_FILL_AREA(#289105); +#289105 = FILL_AREA_STYLE('',(#289106)); +#289106 = FILL_AREA_STYLE_COLOUR('',#285989); +#289107 = CURVE_STYLE('',#289108,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289108 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289109 = STYLED_ITEM('color',(#289110),#24912); +#289110 = PRESENTATION_STYLE_ASSIGNMENT((#289111,#289116)); +#289111 = SURFACE_STYLE_USAGE(.BOTH.,#289112); +#289112 = SURFACE_SIDE_STYLE('',(#289113)); +#289113 = SURFACE_STYLE_FILL_AREA(#289114); +#289114 = FILL_AREA_STYLE('',(#289115)); +#289115 = FILL_AREA_STYLE_COLOUR('',#285989); +#289116 = CURVE_STYLE('',#289117,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289117 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289118 = STYLED_ITEM('color',(#289119),#24929); +#289119 = PRESENTATION_STYLE_ASSIGNMENT((#289120,#289125)); +#289120 = SURFACE_STYLE_USAGE(.BOTH.,#289121); +#289121 = SURFACE_SIDE_STYLE('',(#289122)); +#289122 = SURFACE_STYLE_FILL_AREA(#289123); +#289123 = FILL_AREA_STYLE('',(#289124)); +#289124 = FILL_AREA_STYLE_COLOUR('',#285989); +#289125 = CURVE_STYLE('',#289126,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289126 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289127 = STYLED_ITEM('color',(#289128),#24976); +#289128 = PRESENTATION_STYLE_ASSIGNMENT((#289129,#289134)); +#289129 = SURFACE_STYLE_USAGE(.BOTH.,#289130); +#289130 = SURFACE_SIDE_STYLE('',(#289131)); +#289131 = SURFACE_STYLE_FILL_AREA(#289132); +#289132 = FILL_AREA_STYLE('',(#289133)); +#289133 = FILL_AREA_STYLE_COLOUR('',#285989); +#289134 = CURVE_STYLE('',#289135,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289135 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289136 = STYLED_ITEM('color',(#289137),#24993); +#289137 = PRESENTATION_STYLE_ASSIGNMENT((#289138,#289143)); +#289138 = SURFACE_STYLE_USAGE(.BOTH.,#289139); +#289139 = SURFACE_SIDE_STYLE('',(#289140)); +#289140 = SURFACE_STYLE_FILL_AREA(#289141); +#289141 = FILL_AREA_STYLE('',(#289142)); +#289142 = FILL_AREA_STYLE_COLOUR('',#285989); +#289143 = CURVE_STYLE('',#289144,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289144 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289145 = STYLED_ITEM('color',(#289146),#25040); +#289146 = PRESENTATION_STYLE_ASSIGNMENT((#289147,#289152)); +#289147 = SURFACE_STYLE_USAGE(.BOTH.,#289148); +#289148 = SURFACE_SIDE_STYLE('',(#289149)); +#289149 = SURFACE_STYLE_FILL_AREA(#289150); +#289150 = FILL_AREA_STYLE('',(#289151)); +#289151 = FILL_AREA_STYLE_COLOUR('',#285989); +#289152 = CURVE_STYLE('',#289153,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289153 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289154 = STYLED_ITEM('color',(#289155),#25057); +#289155 = PRESENTATION_STYLE_ASSIGNMENT((#289156,#289161)); +#289156 = SURFACE_STYLE_USAGE(.BOTH.,#289157); +#289157 = SURFACE_SIDE_STYLE('',(#289158)); +#289158 = SURFACE_STYLE_FILL_AREA(#289159); +#289159 = FILL_AREA_STYLE('',(#289160)); +#289160 = FILL_AREA_STYLE_COLOUR('',#285989); +#289161 = CURVE_STYLE('',#289162,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289162 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289163 = STYLED_ITEM('color',(#289164),#25104); +#289164 = PRESENTATION_STYLE_ASSIGNMENT((#289165,#289170)); +#289165 = SURFACE_STYLE_USAGE(.BOTH.,#289166); +#289166 = SURFACE_SIDE_STYLE('',(#289167)); +#289167 = SURFACE_STYLE_FILL_AREA(#289168); +#289168 = FILL_AREA_STYLE('',(#289169)); +#289169 = FILL_AREA_STYLE_COLOUR('',#285989); +#289170 = CURVE_STYLE('',#289171,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289171 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289172 = STYLED_ITEM('color',(#289173),#25121); +#289173 = PRESENTATION_STYLE_ASSIGNMENT((#289174,#289179)); +#289174 = SURFACE_STYLE_USAGE(.BOTH.,#289175); +#289175 = SURFACE_SIDE_STYLE('',(#289176)); +#289176 = SURFACE_STYLE_FILL_AREA(#289177); +#289177 = FILL_AREA_STYLE('',(#289178)); +#289178 = FILL_AREA_STYLE_COLOUR('',#285989); +#289179 = CURVE_STYLE('',#289180,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289180 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289181 = STYLED_ITEM('color',(#289182),#25168); +#289182 = PRESENTATION_STYLE_ASSIGNMENT((#289183,#289188)); +#289183 = SURFACE_STYLE_USAGE(.BOTH.,#289184); +#289184 = SURFACE_SIDE_STYLE('',(#289185)); +#289185 = SURFACE_STYLE_FILL_AREA(#289186); +#289186 = FILL_AREA_STYLE('',(#289187)); +#289187 = FILL_AREA_STYLE_COLOUR('',#285989); +#289188 = CURVE_STYLE('',#289189,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289189 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289190 = STYLED_ITEM('color',(#289191),#25185); +#289191 = PRESENTATION_STYLE_ASSIGNMENT((#289192,#289197)); +#289192 = SURFACE_STYLE_USAGE(.BOTH.,#289193); +#289193 = SURFACE_SIDE_STYLE('',(#289194)); +#289194 = SURFACE_STYLE_FILL_AREA(#289195); +#289195 = FILL_AREA_STYLE('',(#289196)); +#289196 = FILL_AREA_STYLE_COLOUR('',#285989); +#289197 = CURVE_STYLE('',#289198,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289198 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289199 = STYLED_ITEM('color',(#289200),#25232); +#289200 = PRESENTATION_STYLE_ASSIGNMENT((#289201,#289206)); +#289201 = SURFACE_STYLE_USAGE(.BOTH.,#289202); +#289202 = SURFACE_SIDE_STYLE('',(#289203)); +#289203 = SURFACE_STYLE_FILL_AREA(#289204); +#289204 = FILL_AREA_STYLE('',(#289205)); +#289205 = FILL_AREA_STYLE_COLOUR('',#285989); +#289206 = CURVE_STYLE('',#289207,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289207 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289208 = STYLED_ITEM('color',(#289209),#25249); +#289209 = PRESENTATION_STYLE_ASSIGNMENT((#289210,#289215)); +#289210 = SURFACE_STYLE_USAGE(.BOTH.,#289211); +#289211 = SURFACE_SIDE_STYLE('',(#289212)); +#289212 = SURFACE_STYLE_FILL_AREA(#289213); +#289213 = FILL_AREA_STYLE('',(#289214)); +#289214 = FILL_AREA_STYLE_COLOUR('',#285989); +#289215 = CURVE_STYLE('',#289216,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289216 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289217 = STYLED_ITEM('color',(#289218),#25296); +#289218 = PRESENTATION_STYLE_ASSIGNMENT((#289219,#289224)); +#289219 = SURFACE_STYLE_USAGE(.BOTH.,#289220); +#289220 = SURFACE_SIDE_STYLE('',(#289221)); +#289221 = SURFACE_STYLE_FILL_AREA(#289222); +#289222 = FILL_AREA_STYLE('',(#289223)); +#289223 = FILL_AREA_STYLE_COLOUR('',#285989); +#289224 = CURVE_STYLE('',#289225,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289225 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289226 = STYLED_ITEM('color',(#289227),#25313); +#289227 = PRESENTATION_STYLE_ASSIGNMENT((#289228,#289233)); +#289228 = SURFACE_STYLE_USAGE(.BOTH.,#289229); +#289229 = SURFACE_SIDE_STYLE('',(#289230)); +#289230 = SURFACE_STYLE_FILL_AREA(#289231); +#289231 = FILL_AREA_STYLE('',(#289232)); +#289232 = FILL_AREA_STYLE_COLOUR('',#285989); +#289233 = CURVE_STYLE('',#289234,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289234 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289235 = STYLED_ITEM('color',(#289236),#25360); +#289236 = PRESENTATION_STYLE_ASSIGNMENT((#289237,#289242)); +#289237 = SURFACE_STYLE_USAGE(.BOTH.,#289238); +#289238 = SURFACE_SIDE_STYLE('',(#289239)); +#289239 = SURFACE_STYLE_FILL_AREA(#289240); +#289240 = FILL_AREA_STYLE('',(#289241)); +#289241 = FILL_AREA_STYLE_COLOUR('',#285989); +#289242 = CURVE_STYLE('',#289243,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289243 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289244 = STYLED_ITEM('color',(#289245),#25377); +#289245 = PRESENTATION_STYLE_ASSIGNMENT((#289246,#289251)); +#289246 = SURFACE_STYLE_USAGE(.BOTH.,#289247); +#289247 = SURFACE_SIDE_STYLE('',(#289248)); +#289248 = SURFACE_STYLE_FILL_AREA(#289249); +#289249 = FILL_AREA_STYLE('',(#289250)); +#289250 = FILL_AREA_STYLE_COLOUR('',#285989); +#289251 = CURVE_STYLE('',#289252,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289252 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289253 = STYLED_ITEM('color',(#289254),#25424); +#289254 = PRESENTATION_STYLE_ASSIGNMENT((#289255,#289260)); +#289255 = SURFACE_STYLE_USAGE(.BOTH.,#289256); +#289256 = SURFACE_SIDE_STYLE('',(#289257)); +#289257 = SURFACE_STYLE_FILL_AREA(#289258); +#289258 = FILL_AREA_STYLE('',(#289259)); +#289259 = FILL_AREA_STYLE_COLOUR('',#285989); +#289260 = CURVE_STYLE('',#289261,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289261 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289262 = STYLED_ITEM('color',(#289263),#25441); +#289263 = PRESENTATION_STYLE_ASSIGNMENT((#289264,#289269)); +#289264 = SURFACE_STYLE_USAGE(.BOTH.,#289265); +#289265 = SURFACE_SIDE_STYLE('',(#289266)); +#289266 = SURFACE_STYLE_FILL_AREA(#289267); +#289267 = FILL_AREA_STYLE('',(#289268)); +#289268 = FILL_AREA_STYLE_COLOUR('',#285989); +#289269 = CURVE_STYLE('',#289270,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289270 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289271 = STYLED_ITEM('color',(#289272),#25488); +#289272 = PRESENTATION_STYLE_ASSIGNMENT((#289273,#289278)); +#289273 = SURFACE_STYLE_USAGE(.BOTH.,#289274); +#289274 = SURFACE_SIDE_STYLE('',(#289275)); +#289275 = SURFACE_STYLE_FILL_AREA(#289276); +#289276 = FILL_AREA_STYLE('',(#289277)); +#289277 = FILL_AREA_STYLE_COLOUR('',#285989); +#289278 = CURVE_STYLE('',#289279,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289279 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289280 = STYLED_ITEM('color',(#289281),#25505); +#289281 = PRESENTATION_STYLE_ASSIGNMENT((#289282,#289287)); +#289282 = SURFACE_STYLE_USAGE(.BOTH.,#289283); +#289283 = SURFACE_SIDE_STYLE('',(#289284)); +#289284 = SURFACE_STYLE_FILL_AREA(#289285); +#289285 = FILL_AREA_STYLE('',(#289286)); +#289286 = FILL_AREA_STYLE_COLOUR('',#285989); +#289287 = CURVE_STYLE('',#289288,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289288 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289289 = STYLED_ITEM('color',(#289290),#25552); +#289290 = PRESENTATION_STYLE_ASSIGNMENT((#289291,#289296)); +#289291 = SURFACE_STYLE_USAGE(.BOTH.,#289292); +#289292 = SURFACE_SIDE_STYLE('',(#289293)); +#289293 = SURFACE_STYLE_FILL_AREA(#289294); +#289294 = FILL_AREA_STYLE('',(#289295)); +#289295 = FILL_AREA_STYLE_COLOUR('',#285989); +#289296 = CURVE_STYLE('',#289297,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289297 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289298 = STYLED_ITEM('color',(#289299),#25569); +#289299 = PRESENTATION_STYLE_ASSIGNMENT((#289300,#289305)); +#289300 = SURFACE_STYLE_USAGE(.BOTH.,#289301); +#289301 = SURFACE_SIDE_STYLE('',(#289302)); +#289302 = SURFACE_STYLE_FILL_AREA(#289303); +#289303 = FILL_AREA_STYLE('',(#289304)); +#289304 = FILL_AREA_STYLE_COLOUR('',#285989); +#289305 = CURVE_STYLE('',#289306,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289306 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289307 = STYLED_ITEM('color',(#289308),#25616); +#289308 = PRESENTATION_STYLE_ASSIGNMENT((#289309,#289314)); +#289309 = SURFACE_STYLE_USAGE(.BOTH.,#289310); +#289310 = SURFACE_SIDE_STYLE('',(#289311)); +#289311 = SURFACE_STYLE_FILL_AREA(#289312); +#289312 = FILL_AREA_STYLE('',(#289313)); +#289313 = FILL_AREA_STYLE_COLOUR('',#285989); +#289314 = CURVE_STYLE('',#289315,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289315 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289316 = STYLED_ITEM('color',(#289317),#25633); +#289317 = PRESENTATION_STYLE_ASSIGNMENT((#289318,#289323)); +#289318 = SURFACE_STYLE_USAGE(.BOTH.,#289319); +#289319 = SURFACE_SIDE_STYLE('',(#289320)); +#289320 = SURFACE_STYLE_FILL_AREA(#289321); +#289321 = FILL_AREA_STYLE('',(#289322)); +#289322 = FILL_AREA_STYLE_COLOUR('',#285989); +#289323 = CURVE_STYLE('',#289324,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289324 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289325 = STYLED_ITEM('color',(#289326),#25680); +#289326 = PRESENTATION_STYLE_ASSIGNMENT((#289327,#289332)); +#289327 = SURFACE_STYLE_USAGE(.BOTH.,#289328); +#289328 = SURFACE_SIDE_STYLE('',(#289329)); +#289329 = SURFACE_STYLE_FILL_AREA(#289330); +#289330 = FILL_AREA_STYLE('',(#289331)); +#289331 = FILL_AREA_STYLE_COLOUR('',#285989); +#289332 = CURVE_STYLE('',#289333,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289333 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289334 = STYLED_ITEM('color',(#289335),#25697); +#289335 = PRESENTATION_STYLE_ASSIGNMENT((#289336,#289341)); +#289336 = SURFACE_STYLE_USAGE(.BOTH.,#289337); +#289337 = SURFACE_SIDE_STYLE('',(#289338)); +#289338 = SURFACE_STYLE_FILL_AREA(#289339); +#289339 = FILL_AREA_STYLE('',(#289340)); +#289340 = FILL_AREA_STYLE_COLOUR('',#285989); +#289341 = CURVE_STYLE('',#289342,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289342 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289343 = STYLED_ITEM('color',(#289344),#25744); +#289344 = PRESENTATION_STYLE_ASSIGNMENT((#289345,#289350)); +#289345 = SURFACE_STYLE_USAGE(.BOTH.,#289346); +#289346 = SURFACE_SIDE_STYLE('',(#289347)); +#289347 = SURFACE_STYLE_FILL_AREA(#289348); +#289348 = FILL_AREA_STYLE('',(#289349)); +#289349 = FILL_AREA_STYLE_COLOUR('',#285989); +#289350 = CURVE_STYLE('',#289351,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289351 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289352 = STYLED_ITEM('color',(#289353),#25761); +#289353 = PRESENTATION_STYLE_ASSIGNMENT((#289354,#289359)); +#289354 = SURFACE_STYLE_USAGE(.BOTH.,#289355); +#289355 = SURFACE_SIDE_STYLE('',(#289356)); +#289356 = SURFACE_STYLE_FILL_AREA(#289357); +#289357 = FILL_AREA_STYLE('',(#289358)); +#289358 = FILL_AREA_STYLE_COLOUR('',#285989); +#289359 = CURVE_STYLE('',#289360,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289360 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289361 = STYLED_ITEM('color',(#289362),#25808); +#289362 = PRESENTATION_STYLE_ASSIGNMENT((#289363,#289368)); +#289363 = SURFACE_STYLE_USAGE(.BOTH.,#289364); +#289364 = SURFACE_SIDE_STYLE('',(#289365)); +#289365 = SURFACE_STYLE_FILL_AREA(#289366); +#289366 = FILL_AREA_STYLE('',(#289367)); +#289367 = FILL_AREA_STYLE_COLOUR('',#285989); +#289368 = CURVE_STYLE('',#289369,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289369 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289370 = STYLED_ITEM('color',(#289371),#25825); +#289371 = PRESENTATION_STYLE_ASSIGNMENT((#289372,#289377)); +#289372 = SURFACE_STYLE_USAGE(.BOTH.,#289373); +#289373 = SURFACE_SIDE_STYLE('',(#289374)); +#289374 = SURFACE_STYLE_FILL_AREA(#289375); +#289375 = FILL_AREA_STYLE('',(#289376)); +#289376 = FILL_AREA_STYLE_COLOUR('',#285989); +#289377 = CURVE_STYLE('',#289378,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289378 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289379 = STYLED_ITEM('color',(#289380),#25872); +#289380 = PRESENTATION_STYLE_ASSIGNMENT((#289381,#289386)); +#289381 = SURFACE_STYLE_USAGE(.BOTH.,#289382); +#289382 = SURFACE_SIDE_STYLE('',(#289383)); +#289383 = SURFACE_STYLE_FILL_AREA(#289384); +#289384 = FILL_AREA_STYLE('',(#289385)); +#289385 = FILL_AREA_STYLE_COLOUR('',#285989); +#289386 = CURVE_STYLE('',#289387,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289387 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289388 = STYLED_ITEM('color',(#289389),#25889); +#289389 = PRESENTATION_STYLE_ASSIGNMENT((#289390,#289395)); +#289390 = SURFACE_STYLE_USAGE(.BOTH.,#289391); +#289391 = SURFACE_SIDE_STYLE('',(#289392)); +#289392 = SURFACE_STYLE_FILL_AREA(#289393); +#289393 = FILL_AREA_STYLE('',(#289394)); +#289394 = FILL_AREA_STYLE_COLOUR('',#285989); +#289395 = CURVE_STYLE('',#289396,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289396 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289397 = STYLED_ITEM('color',(#289398),#25936); +#289398 = PRESENTATION_STYLE_ASSIGNMENT((#289399,#289404)); +#289399 = SURFACE_STYLE_USAGE(.BOTH.,#289400); +#289400 = SURFACE_SIDE_STYLE('',(#289401)); +#289401 = SURFACE_STYLE_FILL_AREA(#289402); +#289402 = FILL_AREA_STYLE('',(#289403)); +#289403 = FILL_AREA_STYLE_COLOUR('',#285989); +#289404 = CURVE_STYLE('',#289405,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289405 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289406 = STYLED_ITEM('color',(#289407),#25953); +#289407 = PRESENTATION_STYLE_ASSIGNMENT((#289408,#289413)); +#289408 = SURFACE_STYLE_USAGE(.BOTH.,#289409); +#289409 = SURFACE_SIDE_STYLE('',(#289410)); +#289410 = SURFACE_STYLE_FILL_AREA(#289411); +#289411 = FILL_AREA_STYLE('',(#289412)); +#289412 = FILL_AREA_STYLE_COLOUR('',#285989); +#289413 = CURVE_STYLE('',#289414,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289414 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289415 = STYLED_ITEM('color',(#289416),#26000); +#289416 = PRESENTATION_STYLE_ASSIGNMENT((#289417,#289422)); +#289417 = SURFACE_STYLE_USAGE(.BOTH.,#289418); +#289418 = SURFACE_SIDE_STYLE('',(#289419)); +#289419 = SURFACE_STYLE_FILL_AREA(#289420); +#289420 = FILL_AREA_STYLE('',(#289421)); +#289421 = FILL_AREA_STYLE_COLOUR('',#285989); +#289422 = CURVE_STYLE('',#289423,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289423 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289424 = STYLED_ITEM('color',(#289425),#26017); +#289425 = PRESENTATION_STYLE_ASSIGNMENT((#289426,#289431)); +#289426 = SURFACE_STYLE_USAGE(.BOTH.,#289427); +#289427 = SURFACE_SIDE_STYLE('',(#289428)); +#289428 = SURFACE_STYLE_FILL_AREA(#289429); +#289429 = FILL_AREA_STYLE('',(#289430)); +#289430 = FILL_AREA_STYLE_COLOUR('',#285989); +#289431 = CURVE_STYLE('',#289432,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289432 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289433 = STYLED_ITEM('color',(#289434),#26064); +#289434 = PRESENTATION_STYLE_ASSIGNMENT((#289435,#289440)); +#289435 = SURFACE_STYLE_USAGE(.BOTH.,#289436); +#289436 = SURFACE_SIDE_STYLE('',(#289437)); +#289437 = SURFACE_STYLE_FILL_AREA(#289438); +#289438 = FILL_AREA_STYLE('',(#289439)); +#289439 = FILL_AREA_STYLE_COLOUR('',#285989); +#289440 = CURVE_STYLE('',#289441,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289441 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289442 = STYLED_ITEM('color',(#289443),#26081); +#289443 = PRESENTATION_STYLE_ASSIGNMENT((#289444,#289449)); +#289444 = SURFACE_STYLE_USAGE(.BOTH.,#289445); +#289445 = SURFACE_SIDE_STYLE('',(#289446)); +#289446 = SURFACE_STYLE_FILL_AREA(#289447); +#289447 = FILL_AREA_STYLE('',(#289448)); +#289448 = FILL_AREA_STYLE_COLOUR('',#285989); +#289449 = CURVE_STYLE('',#289450,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289450 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289451 = STYLED_ITEM('color',(#289452),#26128); +#289452 = PRESENTATION_STYLE_ASSIGNMENT((#289453,#289458)); +#289453 = SURFACE_STYLE_USAGE(.BOTH.,#289454); +#289454 = SURFACE_SIDE_STYLE('',(#289455)); +#289455 = SURFACE_STYLE_FILL_AREA(#289456); +#289456 = FILL_AREA_STYLE('',(#289457)); +#289457 = FILL_AREA_STYLE_COLOUR('',#285989); +#289458 = CURVE_STYLE('',#289459,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289459 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289460 = STYLED_ITEM('color',(#289461),#26145); +#289461 = PRESENTATION_STYLE_ASSIGNMENT((#289462,#289467)); +#289462 = SURFACE_STYLE_USAGE(.BOTH.,#289463); +#289463 = SURFACE_SIDE_STYLE('',(#289464)); +#289464 = SURFACE_STYLE_FILL_AREA(#289465); +#289465 = FILL_AREA_STYLE('',(#289466)); +#289466 = FILL_AREA_STYLE_COLOUR('',#285989); +#289467 = CURVE_STYLE('',#289468,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289468 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289469 = STYLED_ITEM('color',(#289470),#26192); +#289470 = PRESENTATION_STYLE_ASSIGNMENT((#289471,#289476)); +#289471 = SURFACE_STYLE_USAGE(.BOTH.,#289472); +#289472 = SURFACE_SIDE_STYLE('',(#289473)); +#289473 = SURFACE_STYLE_FILL_AREA(#289474); +#289474 = FILL_AREA_STYLE('',(#289475)); +#289475 = FILL_AREA_STYLE_COLOUR('',#285989); +#289476 = CURVE_STYLE('',#289477,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289477 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289478 = STYLED_ITEM('color',(#289479),#26209); +#289479 = PRESENTATION_STYLE_ASSIGNMENT((#289480,#289485)); +#289480 = SURFACE_STYLE_USAGE(.BOTH.,#289481); +#289481 = SURFACE_SIDE_STYLE('',(#289482)); +#289482 = SURFACE_STYLE_FILL_AREA(#289483); +#289483 = FILL_AREA_STYLE('',(#289484)); +#289484 = FILL_AREA_STYLE_COLOUR('',#285989); +#289485 = CURVE_STYLE('',#289486,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289486 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289487 = STYLED_ITEM('color',(#289488),#26256); +#289488 = PRESENTATION_STYLE_ASSIGNMENT((#289489,#289494)); +#289489 = SURFACE_STYLE_USAGE(.BOTH.,#289490); +#289490 = SURFACE_SIDE_STYLE('',(#289491)); +#289491 = SURFACE_STYLE_FILL_AREA(#289492); +#289492 = FILL_AREA_STYLE('',(#289493)); +#289493 = FILL_AREA_STYLE_COLOUR('',#285989); +#289494 = CURVE_STYLE('',#289495,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289495 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289496 = STYLED_ITEM('color',(#289497),#26273); +#289497 = PRESENTATION_STYLE_ASSIGNMENT((#289498,#289503)); +#289498 = SURFACE_STYLE_USAGE(.BOTH.,#289499); +#289499 = SURFACE_SIDE_STYLE('',(#289500)); +#289500 = SURFACE_STYLE_FILL_AREA(#289501); +#289501 = FILL_AREA_STYLE('',(#289502)); +#289502 = FILL_AREA_STYLE_COLOUR('',#285989); +#289503 = CURVE_STYLE('',#289504,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289504 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289505 = STYLED_ITEM('color',(#289506),#26320); +#289506 = PRESENTATION_STYLE_ASSIGNMENT((#289507,#289512)); +#289507 = SURFACE_STYLE_USAGE(.BOTH.,#289508); +#289508 = SURFACE_SIDE_STYLE('',(#289509)); +#289509 = SURFACE_STYLE_FILL_AREA(#289510); +#289510 = FILL_AREA_STYLE('',(#289511)); +#289511 = FILL_AREA_STYLE_COLOUR('',#285989); +#289512 = CURVE_STYLE('',#289513,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289513 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289514 = STYLED_ITEM('color',(#289515),#26337); +#289515 = PRESENTATION_STYLE_ASSIGNMENT((#289516,#289521)); +#289516 = SURFACE_STYLE_USAGE(.BOTH.,#289517); +#289517 = SURFACE_SIDE_STYLE('',(#289518)); +#289518 = SURFACE_STYLE_FILL_AREA(#289519); +#289519 = FILL_AREA_STYLE('',(#289520)); +#289520 = FILL_AREA_STYLE_COLOUR('',#285989); +#289521 = CURVE_STYLE('',#289522,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289522 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289523 = STYLED_ITEM('color',(#289524),#26384); +#289524 = PRESENTATION_STYLE_ASSIGNMENT((#289525,#289530)); +#289525 = SURFACE_STYLE_USAGE(.BOTH.,#289526); +#289526 = SURFACE_SIDE_STYLE('',(#289527)); +#289527 = SURFACE_STYLE_FILL_AREA(#289528); +#289528 = FILL_AREA_STYLE('',(#289529)); +#289529 = FILL_AREA_STYLE_COLOUR('',#285989); +#289530 = CURVE_STYLE('',#289531,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289531 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289532 = STYLED_ITEM('color',(#289533),#26401); +#289533 = PRESENTATION_STYLE_ASSIGNMENT((#289534,#289539)); +#289534 = SURFACE_STYLE_USAGE(.BOTH.,#289535); +#289535 = SURFACE_SIDE_STYLE('',(#289536)); +#289536 = SURFACE_STYLE_FILL_AREA(#289537); +#289537 = FILL_AREA_STYLE('',(#289538)); +#289538 = FILL_AREA_STYLE_COLOUR('',#285989); +#289539 = CURVE_STYLE('',#289540,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289540 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289541 = STYLED_ITEM('color',(#289542),#26448); +#289542 = PRESENTATION_STYLE_ASSIGNMENT((#289543,#289548)); +#289543 = SURFACE_STYLE_USAGE(.BOTH.,#289544); +#289544 = SURFACE_SIDE_STYLE('',(#289545)); +#289545 = SURFACE_STYLE_FILL_AREA(#289546); +#289546 = FILL_AREA_STYLE('',(#289547)); +#289547 = FILL_AREA_STYLE_COLOUR('',#285989); +#289548 = CURVE_STYLE('',#289549,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289549 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289550 = STYLED_ITEM('color',(#289551),#26465); +#289551 = PRESENTATION_STYLE_ASSIGNMENT((#289552,#289557)); +#289552 = SURFACE_STYLE_USAGE(.BOTH.,#289553); +#289553 = SURFACE_SIDE_STYLE('',(#289554)); +#289554 = SURFACE_STYLE_FILL_AREA(#289555); +#289555 = FILL_AREA_STYLE('',(#289556)); +#289556 = FILL_AREA_STYLE_COLOUR('',#285989); +#289557 = CURVE_STYLE('',#289558,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289558 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289559 = STYLED_ITEM('color',(#289560),#26512); +#289560 = PRESENTATION_STYLE_ASSIGNMENT((#289561,#289566)); +#289561 = SURFACE_STYLE_USAGE(.BOTH.,#289562); +#289562 = SURFACE_SIDE_STYLE('',(#289563)); +#289563 = SURFACE_STYLE_FILL_AREA(#289564); +#289564 = FILL_AREA_STYLE('',(#289565)); +#289565 = FILL_AREA_STYLE_COLOUR('',#285989); +#289566 = CURVE_STYLE('',#289567,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289567 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289568 = STYLED_ITEM('color',(#289569),#26529); +#289569 = PRESENTATION_STYLE_ASSIGNMENT((#289570,#289575)); +#289570 = SURFACE_STYLE_USAGE(.BOTH.,#289571); +#289571 = SURFACE_SIDE_STYLE('',(#289572)); +#289572 = SURFACE_STYLE_FILL_AREA(#289573); +#289573 = FILL_AREA_STYLE('',(#289574)); +#289574 = FILL_AREA_STYLE_COLOUR('',#285989); +#289575 = CURVE_STYLE('',#289576,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289576 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289577 = STYLED_ITEM('color',(#289578),#26576); +#289578 = PRESENTATION_STYLE_ASSIGNMENT((#289579,#289584)); +#289579 = SURFACE_STYLE_USAGE(.BOTH.,#289580); +#289580 = SURFACE_SIDE_STYLE('',(#289581)); +#289581 = SURFACE_STYLE_FILL_AREA(#289582); +#289582 = FILL_AREA_STYLE('',(#289583)); +#289583 = FILL_AREA_STYLE_COLOUR('',#285989); +#289584 = CURVE_STYLE('',#289585,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289585 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289586 = STYLED_ITEM('color',(#289587),#26593); +#289587 = PRESENTATION_STYLE_ASSIGNMENT((#289588,#289593)); +#289588 = SURFACE_STYLE_USAGE(.BOTH.,#289589); +#289589 = SURFACE_SIDE_STYLE('',(#289590)); +#289590 = SURFACE_STYLE_FILL_AREA(#289591); +#289591 = FILL_AREA_STYLE('',(#289592)); +#289592 = FILL_AREA_STYLE_COLOUR('',#285989); +#289593 = CURVE_STYLE('',#289594,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289594 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289595 = STYLED_ITEM('color',(#289596),#26640); +#289596 = PRESENTATION_STYLE_ASSIGNMENT((#289597,#289602)); +#289597 = SURFACE_STYLE_USAGE(.BOTH.,#289598); +#289598 = SURFACE_SIDE_STYLE('',(#289599)); +#289599 = SURFACE_STYLE_FILL_AREA(#289600); +#289600 = FILL_AREA_STYLE('',(#289601)); +#289601 = FILL_AREA_STYLE_COLOUR('',#285989); +#289602 = CURVE_STYLE('',#289603,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289603 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289604 = STYLED_ITEM('color',(#289605),#26657); +#289605 = PRESENTATION_STYLE_ASSIGNMENT((#289606,#289611)); +#289606 = SURFACE_STYLE_USAGE(.BOTH.,#289607); +#289607 = SURFACE_SIDE_STYLE('',(#289608)); +#289608 = SURFACE_STYLE_FILL_AREA(#289609); +#289609 = FILL_AREA_STYLE('',(#289610)); +#289610 = FILL_AREA_STYLE_COLOUR('',#285989); +#289611 = CURVE_STYLE('',#289612,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289612 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289613 = STYLED_ITEM('color',(#289614),#26704); +#289614 = PRESENTATION_STYLE_ASSIGNMENT((#289615,#289620)); +#289615 = SURFACE_STYLE_USAGE(.BOTH.,#289616); +#289616 = SURFACE_SIDE_STYLE('',(#289617)); +#289617 = SURFACE_STYLE_FILL_AREA(#289618); +#289618 = FILL_AREA_STYLE('',(#289619)); +#289619 = FILL_AREA_STYLE_COLOUR('',#285989); +#289620 = CURVE_STYLE('',#289621,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289621 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289622 = STYLED_ITEM('color',(#289623),#26721); +#289623 = PRESENTATION_STYLE_ASSIGNMENT((#289624,#289629)); +#289624 = SURFACE_STYLE_USAGE(.BOTH.,#289625); +#289625 = SURFACE_SIDE_STYLE('',(#289626)); +#289626 = SURFACE_STYLE_FILL_AREA(#289627); +#289627 = FILL_AREA_STYLE('',(#289628)); +#289628 = FILL_AREA_STYLE_COLOUR('',#285989); +#289629 = CURVE_STYLE('',#289630,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289630 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289631 = STYLED_ITEM('color',(#289632),#26768); +#289632 = PRESENTATION_STYLE_ASSIGNMENT((#289633,#289638)); +#289633 = SURFACE_STYLE_USAGE(.BOTH.,#289634); +#289634 = SURFACE_SIDE_STYLE('',(#289635)); +#289635 = SURFACE_STYLE_FILL_AREA(#289636); +#289636 = FILL_AREA_STYLE('',(#289637)); +#289637 = FILL_AREA_STYLE_COLOUR('',#285989); +#289638 = CURVE_STYLE('',#289639,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289639 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289640 = STYLED_ITEM('color',(#289641),#26785); +#289641 = PRESENTATION_STYLE_ASSIGNMENT((#289642,#289647)); +#289642 = SURFACE_STYLE_USAGE(.BOTH.,#289643); +#289643 = SURFACE_SIDE_STYLE('',(#289644)); +#289644 = SURFACE_STYLE_FILL_AREA(#289645); +#289645 = FILL_AREA_STYLE('',(#289646)); +#289646 = FILL_AREA_STYLE_COLOUR('',#285989); +#289647 = CURVE_STYLE('',#289648,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289648 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289649 = STYLED_ITEM('color',(#289650),#26832); +#289650 = PRESENTATION_STYLE_ASSIGNMENT((#289651,#289656)); +#289651 = SURFACE_STYLE_USAGE(.BOTH.,#289652); +#289652 = SURFACE_SIDE_STYLE('',(#289653)); +#289653 = SURFACE_STYLE_FILL_AREA(#289654); +#289654 = FILL_AREA_STYLE('',(#289655)); +#289655 = FILL_AREA_STYLE_COLOUR('',#285989); +#289656 = CURVE_STYLE('',#289657,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289657 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289658 = STYLED_ITEM('color',(#289659),#26849); +#289659 = PRESENTATION_STYLE_ASSIGNMENT((#289660,#289665)); +#289660 = SURFACE_STYLE_USAGE(.BOTH.,#289661); +#289661 = SURFACE_SIDE_STYLE('',(#289662)); +#289662 = SURFACE_STYLE_FILL_AREA(#289663); +#289663 = FILL_AREA_STYLE('',(#289664)); +#289664 = FILL_AREA_STYLE_COLOUR('',#285989); +#289665 = CURVE_STYLE('',#289666,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289666 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289667 = STYLED_ITEM('color',(#289668),#26896); +#289668 = PRESENTATION_STYLE_ASSIGNMENT((#289669,#289674)); +#289669 = SURFACE_STYLE_USAGE(.BOTH.,#289670); +#289670 = SURFACE_SIDE_STYLE('',(#289671)); +#289671 = SURFACE_STYLE_FILL_AREA(#289672); +#289672 = FILL_AREA_STYLE('',(#289673)); +#289673 = FILL_AREA_STYLE_COLOUR('',#285989); +#289674 = CURVE_STYLE('',#289675,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289675 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289676 = STYLED_ITEM('color',(#289677),#26913); +#289677 = PRESENTATION_STYLE_ASSIGNMENT((#289678,#289683)); +#289678 = SURFACE_STYLE_USAGE(.BOTH.,#289679); +#289679 = SURFACE_SIDE_STYLE('',(#289680)); +#289680 = SURFACE_STYLE_FILL_AREA(#289681); +#289681 = FILL_AREA_STYLE('',(#289682)); +#289682 = FILL_AREA_STYLE_COLOUR('',#285989); +#289683 = CURVE_STYLE('',#289684,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289684 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289685 = STYLED_ITEM('color',(#289686),#26960); +#289686 = PRESENTATION_STYLE_ASSIGNMENT((#289687,#289692)); +#289687 = SURFACE_STYLE_USAGE(.BOTH.,#289688); +#289688 = SURFACE_SIDE_STYLE('',(#289689)); +#289689 = SURFACE_STYLE_FILL_AREA(#289690); +#289690 = FILL_AREA_STYLE('',(#289691)); +#289691 = FILL_AREA_STYLE_COLOUR('',#285989); +#289692 = CURVE_STYLE('',#289693,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289693 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289694 = STYLED_ITEM('color',(#289695),#26977); +#289695 = PRESENTATION_STYLE_ASSIGNMENT((#289696,#289701)); +#289696 = SURFACE_STYLE_USAGE(.BOTH.,#289697); +#289697 = SURFACE_SIDE_STYLE('',(#289698)); +#289698 = SURFACE_STYLE_FILL_AREA(#289699); +#289699 = FILL_AREA_STYLE('',(#289700)); +#289700 = FILL_AREA_STYLE_COLOUR('',#285989); +#289701 = CURVE_STYLE('',#289702,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289702 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289703 = STYLED_ITEM('color',(#289704),#27024); +#289704 = PRESENTATION_STYLE_ASSIGNMENT((#289705,#289710)); +#289705 = SURFACE_STYLE_USAGE(.BOTH.,#289706); +#289706 = SURFACE_SIDE_STYLE('',(#289707)); +#289707 = SURFACE_STYLE_FILL_AREA(#289708); +#289708 = FILL_AREA_STYLE('',(#289709)); +#289709 = FILL_AREA_STYLE_COLOUR('',#285989); +#289710 = CURVE_STYLE('',#289711,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289711 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289712 = STYLED_ITEM('color',(#289713),#27041); +#289713 = PRESENTATION_STYLE_ASSIGNMENT((#289714,#289719)); +#289714 = SURFACE_STYLE_USAGE(.BOTH.,#289715); +#289715 = SURFACE_SIDE_STYLE('',(#289716)); +#289716 = SURFACE_STYLE_FILL_AREA(#289717); +#289717 = FILL_AREA_STYLE('',(#289718)); +#289718 = FILL_AREA_STYLE_COLOUR('',#285989); +#289719 = CURVE_STYLE('',#289720,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289720 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289721 = STYLED_ITEM('color',(#289722),#27088); +#289722 = PRESENTATION_STYLE_ASSIGNMENT((#289723,#289728)); +#289723 = SURFACE_STYLE_USAGE(.BOTH.,#289724); +#289724 = SURFACE_SIDE_STYLE('',(#289725)); +#289725 = SURFACE_STYLE_FILL_AREA(#289726); +#289726 = FILL_AREA_STYLE('',(#289727)); +#289727 = FILL_AREA_STYLE_COLOUR('',#270350); +#289728 = CURVE_STYLE('',#289729,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289729 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289730 = STYLED_ITEM('color',(#289731),#27119); +#289731 = PRESENTATION_STYLE_ASSIGNMENT((#289732,#289737)); +#289732 = SURFACE_STYLE_USAGE(.BOTH.,#289733); +#289733 = SURFACE_SIDE_STYLE('',(#289734)); +#289734 = SURFACE_STYLE_FILL_AREA(#289735); +#289735 = FILL_AREA_STYLE('',(#289736)); +#289736 = FILL_AREA_STYLE_COLOUR('',#270350); +#289737 = CURVE_STYLE('',#289738,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289738 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289739 = OVER_RIDING_STYLED_ITEM('overriding color',(#289740),#27133, + #289730); +#289740 = PRESENTATION_STYLE_ASSIGNMENT((#289741,#289746)); +#289741 = SURFACE_STYLE_USAGE(.BOTH.,#289742); +#289742 = SURFACE_SIDE_STYLE('',(#289743)); +#289743 = SURFACE_STYLE_FILL_AREA(#289744); +#289744 = FILL_AREA_STYLE('',(#289745)); +#289745 = FILL_AREA_STYLE_COLOUR('',#285989); +#289746 = CURVE_STYLE('',#289747,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289747 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289748 = OVER_RIDING_STYLED_ITEM('overriding color',(#289749),#27149, + #289730); +#289749 = PRESENTATION_STYLE_ASSIGNMENT((#289750,#289755)); +#289750 = SURFACE_STYLE_USAGE(.BOTH.,#289751); +#289751 = SURFACE_SIDE_STYLE('',(#289752)); +#289752 = SURFACE_STYLE_FILL_AREA(#289753); +#289753 = FILL_AREA_STYLE('',(#289754)); +#289754 = FILL_AREA_STYLE_COLOUR('',#285989); +#289755 = CURVE_STYLE('',#289756,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289756 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289757 = STYLED_ITEM('color',(#289758),#27175); +#289758 = PRESENTATION_STYLE_ASSIGNMENT((#289759,#289764)); +#289759 = SURFACE_STYLE_USAGE(.BOTH.,#289760); +#289760 = SURFACE_SIDE_STYLE('',(#289761)); +#289761 = SURFACE_STYLE_FILL_AREA(#289762); +#289762 = FILL_AREA_STYLE('',(#289763)); +#289763 = FILL_AREA_STYLE_COLOUR('',#270350); +#289764 = CURVE_STYLE('',#289765,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289765 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289766 = STYLED_ITEM('color',(#289767),#27199); +#289767 = PRESENTATION_STYLE_ASSIGNMENT((#289768,#289773)); +#289768 = SURFACE_STYLE_USAGE(.BOTH.,#289769); +#289769 = SURFACE_SIDE_STYLE('',(#289770)); +#289770 = SURFACE_STYLE_FILL_AREA(#289771); +#289771 = FILL_AREA_STYLE('',(#289772)); +#289772 = FILL_AREA_STYLE_COLOUR('',#270350); +#289773 = CURVE_STYLE('',#289774,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289774 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289775 = OVER_RIDING_STYLED_ITEM('overriding color',(#289776),#27213, + #289766); +#289776 = PRESENTATION_STYLE_ASSIGNMENT((#289777,#289782)); +#289777 = SURFACE_STYLE_USAGE(.BOTH.,#289778); +#289778 = SURFACE_SIDE_STYLE('',(#289779)); +#289779 = SURFACE_STYLE_FILL_AREA(#289780); +#289780 = FILL_AREA_STYLE('',(#289781)); +#289781 = FILL_AREA_STYLE_COLOUR('',#285989); +#289782 = CURVE_STYLE('',#289783,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289783 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289784 = OVER_RIDING_STYLED_ITEM('overriding color',(#289785),#27229, + #289766); +#289785 = PRESENTATION_STYLE_ASSIGNMENT((#289786,#289791)); +#289786 = SURFACE_STYLE_USAGE(.BOTH.,#289787); +#289787 = SURFACE_SIDE_STYLE('',(#289788)); +#289788 = SURFACE_STYLE_FILL_AREA(#289789); +#289789 = FILL_AREA_STYLE('',(#289790)); +#289790 = FILL_AREA_STYLE_COLOUR('',#285989); +#289791 = CURVE_STYLE('',#289792,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289792 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289793 = STYLED_ITEM('color',(#289794),#27248); +#289794 = PRESENTATION_STYLE_ASSIGNMENT((#289795,#289800)); +#289795 = SURFACE_STYLE_USAGE(.BOTH.,#289796); +#289796 = SURFACE_SIDE_STYLE('',(#289797)); +#289797 = SURFACE_STYLE_FILL_AREA(#289798); +#289798 = FILL_AREA_STYLE('',(#289799)); +#289799 = FILL_AREA_STYLE_COLOUR('',#270350); +#289800 = CURVE_STYLE('',#289801,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289801 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289802 = STYLED_ITEM('color',(#289803),#27279); +#289803 = PRESENTATION_STYLE_ASSIGNMENT((#289804,#289809)); +#289804 = SURFACE_STYLE_USAGE(.BOTH.,#289805); +#289805 = SURFACE_SIDE_STYLE('',(#289806)); +#289806 = SURFACE_STYLE_FILL_AREA(#289807); +#289807 = FILL_AREA_STYLE('',(#289808)); +#289808 = FILL_AREA_STYLE_COLOUR('',#270350); +#289809 = CURVE_STYLE('',#289810,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289810 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289811 = OVER_RIDING_STYLED_ITEM('overriding color',(#289812),#27293, + #289802); +#289812 = PRESENTATION_STYLE_ASSIGNMENT((#289813,#289818)); +#289813 = SURFACE_STYLE_USAGE(.BOTH.,#289814); +#289814 = SURFACE_SIDE_STYLE('',(#289815)); +#289815 = SURFACE_STYLE_FILL_AREA(#289816); +#289816 = FILL_AREA_STYLE('',(#289817)); +#289817 = FILL_AREA_STYLE_COLOUR('',#285989); +#289818 = CURVE_STYLE('',#289819,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289819 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289820 = OVER_RIDING_STYLED_ITEM('overriding color',(#289821),#27309, + #289802); +#289821 = PRESENTATION_STYLE_ASSIGNMENT((#289822,#289827)); +#289822 = SURFACE_STYLE_USAGE(.BOTH.,#289823); +#289823 = SURFACE_SIDE_STYLE('',(#289824)); +#289824 = SURFACE_STYLE_FILL_AREA(#289825); +#289825 = FILL_AREA_STYLE('',(#289826)); +#289826 = FILL_AREA_STYLE_COLOUR('',#285989); +#289827 = CURVE_STYLE('',#289828,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289828 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289829 = STYLED_ITEM('color',(#289830),#27335); +#289830 = PRESENTATION_STYLE_ASSIGNMENT((#289831,#289836)); +#289831 = SURFACE_STYLE_USAGE(.BOTH.,#289832); +#289832 = SURFACE_SIDE_STYLE('',(#289833)); +#289833 = SURFACE_STYLE_FILL_AREA(#289834); +#289834 = FILL_AREA_STYLE('',(#289835)); +#289835 = FILL_AREA_STYLE_COLOUR('',#270350); +#289836 = CURVE_STYLE('',#289837,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289837 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289838 = STYLED_ITEM('color',(#289839),#27359); +#289839 = PRESENTATION_STYLE_ASSIGNMENT((#289840,#289845)); +#289840 = SURFACE_STYLE_USAGE(.BOTH.,#289841); +#289841 = SURFACE_SIDE_STYLE('',(#289842)); +#289842 = SURFACE_STYLE_FILL_AREA(#289843); +#289843 = FILL_AREA_STYLE('',(#289844)); +#289844 = FILL_AREA_STYLE_COLOUR('',#270350); +#289845 = CURVE_STYLE('',#289846,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289846 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289847 = OVER_RIDING_STYLED_ITEM('overriding color',(#289848),#27373, + #289838); +#289848 = PRESENTATION_STYLE_ASSIGNMENT((#289849,#289854)); +#289849 = SURFACE_STYLE_USAGE(.BOTH.,#289850); +#289850 = SURFACE_SIDE_STYLE('',(#289851)); +#289851 = SURFACE_STYLE_FILL_AREA(#289852); +#289852 = FILL_AREA_STYLE('',(#289853)); +#289853 = FILL_AREA_STYLE_COLOUR('',#285989); +#289854 = CURVE_STYLE('',#289855,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289855 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289856 = OVER_RIDING_STYLED_ITEM('overriding color',(#289857),#27389, + #289838); +#289857 = PRESENTATION_STYLE_ASSIGNMENT((#289858,#289863)); +#289858 = SURFACE_STYLE_USAGE(.BOTH.,#289859); +#289859 = SURFACE_SIDE_STYLE('',(#289860)); +#289860 = SURFACE_STYLE_FILL_AREA(#289861); +#289861 = FILL_AREA_STYLE('',(#289862)); +#289862 = FILL_AREA_STYLE_COLOUR('',#285989); +#289863 = CURVE_STYLE('',#289864,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289864 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289865 = STYLED_ITEM('color',(#289866),#27408); +#289866 = PRESENTATION_STYLE_ASSIGNMENT((#289867,#289872)); +#289867 = SURFACE_STYLE_USAGE(.BOTH.,#289868); +#289868 = SURFACE_SIDE_STYLE('',(#289869)); +#289869 = SURFACE_STYLE_FILL_AREA(#289870); +#289870 = FILL_AREA_STYLE('',(#289871)); +#289871 = FILL_AREA_STYLE_COLOUR('',#270350); +#289872 = CURVE_STYLE('',#289873,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289873 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289874 = STYLED_ITEM('color',(#289875),#27439); +#289875 = PRESENTATION_STYLE_ASSIGNMENT((#289876,#289881)); +#289876 = SURFACE_STYLE_USAGE(.BOTH.,#289877); +#289877 = SURFACE_SIDE_STYLE('',(#289878)); +#289878 = SURFACE_STYLE_FILL_AREA(#289879); +#289879 = FILL_AREA_STYLE('',(#289880)); +#289880 = FILL_AREA_STYLE_COLOUR('',#270350); +#289881 = CURVE_STYLE('',#289882,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289882 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289883 = OVER_RIDING_STYLED_ITEM('overriding color',(#289884),#27453, + #289874); +#289884 = PRESENTATION_STYLE_ASSIGNMENT((#289885,#289890)); +#289885 = SURFACE_STYLE_USAGE(.BOTH.,#289886); +#289886 = SURFACE_SIDE_STYLE('',(#289887)); +#289887 = SURFACE_STYLE_FILL_AREA(#289888); +#289888 = FILL_AREA_STYLE('',(#289889)); +#289889 = FILL_AREA_STYLE_COLOUR('',#285989); +#289890 = CURVE_STYLE('',#289891,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289891 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289892 = OVER_RIDING_STYLED_ITEM('overriding color',(#289893),#27469, + #289874); +#289893 = PRESENTATION_STYLE_ASSIGNMENT((#289894,#289899)); +#289894 = SURFACE_STYLE_USAGE(.BOTH.,#289895); +#289895 = SURFACE_SIDE_STYLE('',(#289896)); +#289896 = SURFACE_STYLE_FILL_AREA(#289897); +#289897 = FILL_AREA_STYLE('',(#289898)); +#289898 = FILL_AREA_STYLE_COLOUR('',#285989); +#289899 = CURVE_STYLE('',#289900,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289900 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289901 = STYLED_ITEM('color',(#289902),#27495); +#289902 = PRESENTATION_STYLE_ASSIGNMENT((#289903,#289908)); +#289903 = SURFACE_STYLE_USAGE(.BOTH.,#289904); +#289904 = SURFACE_SIDE_STYLE('',(#289905)); +#289905 = SURFACE_STYLE_FILL_AREA(#289906); +#289906 = FILL_AREA_STYLE('',(#289907)); +#289907 = FILL_AREA_STYLE_COLOUR('',#270350); +#289908 = CURVE_STYLE('',#289909,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289909 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289910 = STYLED_ITEM('color',(#289911),#27519); +#289911 = PRESENTATION_STYLE_ASSIGNMENT((#289912,#289917)); +#289912 = SURFACE_STYLE_USAGE(.BOTH.,#289913); +#289913 = SURFACE_SIDE_STYLE('',(#289914)); +#289914 = SURFACE_STYLE_FILL_AREA(#289915); +#289915 = FILL_AREA_STYLE('',(#289916)); +#289916 = FILL_AREA_STYLE_COLOUR('',#270350); +#289917 = CURVE_STYLE('',#289918,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289918 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289919 = OVER_RIDING_STYLED_ITEM('overriding color',(#289920),#27533, + #289910); +#289920 = PRESENTATION_STYLE_ASSIGNMENT((#289921,#289926)); +#289921 = SURFACE_STYLE_USAGE(.BOTH.,#289922); +#289922 = SURFACE_SIDE_STYLE('',(#289923)); +#289923 = SURFACE_STYLE_FILL_AREA(#289924); +#289924 = FILL_AREA_STYLE('',(#289925)); +#289925 = FILL_AREA_STYLE_COLOUR('',#285989); +#289926 = CURVE_STYLE('',#289927,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289927 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289928 = OVER_RIDING_STYLED_ITEM('overriding color',(#289929),#27549, + #289910); +#289929 = PRESENTATION_STYLE_ASSIGNMENT((#289930,#289935)); +#289930 = SURFACE_STYLE_USAGE(.BOTH.,#289931); +#289931 = SURFACE_SIDE_STYLE('',(#289932)); +#289932 = SURFACE_STYLE_FILL_AREA(#289933); +#289933 = FILL_AREA_STYLE('',(#289934)); +#289934 = FILL_AREA_STYLE_COLOUR('',#285989); +#289935 = CURVE_STYLE('',#289936,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289936 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289937 = STYLED_ITEM('color',(#289938),#27568); +#289938 = PRESENTATION_STYLE_ASSIGNMENT((#289939,#289944)); +#289939 = SURFACE_STYLE_USAGE(.BOTH.,#289940); +#289940 = SURFACE_SIDE_STYLE('',(#289941)); +#289941 = SURFACE_STYLE_FILL_AREA(#289942); +#289942 = FILL_AREA_STYLE('',(#289943)); +#289943 = FILL_AREA_STYLE_COLOUR('',#270350); +#289944 = CURVE_STYLE('',#289945,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289945 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289946 = STYLED_ITEM('color',(#289947),#27599); +#289947 = PRESENTATION_STYLE_ASSIGNMENT((#289948,#289953)); +#289948 = SURFACE_STYLE_USAGE(.BOTH.,#289949); +#289949 = SURFACE_SIDE_STYLE('',(#289950)); +#289950 = SURFACE_STYLE_FILL_AREA(#289951); +#289951 = FILL_AREA_STYLE('',(#289952)); +#289952 = FILL_AREA_STYLE_COLOUR('',#270350); +#289953 = CURVE_STYLE('',#289954,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289954 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289955 = OVER_RIDING_STYLED_ITEM('overriding color',(#289956),#27613, + #289946); +#289956 = PRESENTATION_STYLE_ASSIGNMENT((#289957,#289962)); +#289957 = SURFACE_STYLE_USAGE(.BOTH.,#289958); +#289958 = SURFACE_SIDE_STYLE('',(#289959)); +#289959 = SURFACE_STYLE_FILL_AREA(#289960); +#289960 = FILL_AREA_STYLE('',(#289961)); +#289961 = FILL_AREA_STYLE_COLOUR('',#285989); +#289962 = CURVE_STYLE('',#289963,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289963 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289964 = OVER_RIDING_STYLED_ITEM('overriding color',(#289965),#27629, + #289946); +#289965 = PRESENTATION_STYLE_ASSIGNMENT((#289966,#289971)); +#289966 = SURFACE_STYLE_USAGE(.BOTH.,#289967); +#289967 = SURFACE_SIDE_STYLE('',(#289968)); +#289968 = SURFACE_STYLE_FILL_AREA(#289969); +#289969 = FILL_AREA_STYLE('',(#289970)); +#289970 = FILL_AREA_STYLE_COLOUR('',#285989); +#289971 = CURVE_STYLE('',#289972,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289972 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289973 = STYLED_ITEM('color',(#289974),#27655); +#289974 = PRESENTATION_STYLE_ASSIGNMENT((#289975,#289980)); +#289975 = SURFACE_STYLE_USAGE(.BOTH.,#289976); +#289976 = SURFACE_SIDE_STYLE('',(#289977)); +#289977 = SURFACE_STYLE_FILL_AREA(#289978); +#289978 = FILL_AREA_STYLE('',(#289979)); +#289979 = FILL_AREA_STYLE_COLOUR('',#270350); +#289980 = CURVE_STYLE('',#289981,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289981 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289982 = STYLED_ITEM('color',(#289983),#27679); +#289983 = PRESENTATION_STYLE_ASSIGNMENT((#289984,#289989)); +#289984 = SURFACE_STYLE_USAGE(.BOTH.,#289985); +#289985 = SURFACE_SIDE_STYLE('',(#289986)); +#289986 = SURFACE_STYLE_FILL_AREA(#289987); +#289987 = FILL_AREA_STYLE('',(#289988)); +#289988 = FILL_AREA_STYLE_COLOUR('',#270350); +#289989 = CURVE_STYLE('',#289990,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#289990 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#289991 = OVER_RIDING_STYLED_ITEM('overriding color',(#289992),#27693, + #289982); +#289992 = PRESENTATION_STYLE_ASSIGNMENT((#289993,#289998)); +#289993 = SURFACE_STYLE_USAGE(.BOTH.,#289994); +#289994 = SURFACE_SIDE_STYLE('',(#289995)); +#289995 = SURFACE_STYLE_FILL_AREA(#289996); +#289996 = FILL_AREA_STYLE('',(#289997)); +#289997 = FILL_AREA_STYLE_COLOUR('',#285989); +#289998 = CURVE_STYLE('',#289999,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#289999 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290000 = OVER_RIDING_STYLED_ITEM('overriding color',(#290001),#27709, + #289982); +#290001 = PRESENTATION_STYLE_ASSIGNMENT((#290002,#290007)); +#290002 = SURFACE_STYLE_USAGE(.BOTH.,#290003); +#290003 = SURFACE_SIDE_STYLE('',(#290004)); +#290004 = SURFACE_STYLE_FILL_AREA(#290005); +#290005 = FILL_AREA_STYLE('',(#290006)); +#290006 = FILL_AREA_STYLE_COLOUR('',#285989); +#290007 = CURVE_STYLE('',#290008,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290008 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290009 = STYLED_ITEM('color',(#290010),#27728); +#290010 = PRESENTATION_STYLE_ASSIGNMENT((#290011,#290016)); +#290011 = SURFACE_STYLE_USAGE(.BOTH.,#290012); +#290012 = SURFACE_SIDE_STYLE('',(#290013)); +#290013 = SURFACE_STYLE_FILL_AREA(#290014); +#290014 = FILL_AREA_STYLE('',(#290015)); +#290015 = FILL_AREA_STYLE_COLOUR('',#270350); +#290016 = CURVE_STYLE('',#290017,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290017 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290018 = STYLED_ITEM('color',(#290019),#27759); +#290019 = PRESENTATION_STYLE_ASSIGNMENT((#290020,#290025)); +#290020 = SURFACE_STYLE_USAGE(.BOTH.,#290021); +#290021 = SURFACE_SIDE_STYLE('',(#290022)); +#290022 = SURFACE_STYLE_FILL_AREA(#290023); +#290023 = FILL_AREA_STYLE('',(#290024)); +#290024 = FILL_AREA_STYLE_COLOUR('',#270350); +#290025 = CURVE_STYLE('',#290026,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290026 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290027 = OVER_RIDING_STYLED_ITEM('overriding color',(#290028),#27773, + #290018); +#290028 = PRESENTATION_STYLE_ASSIGNMENT((#290029,#290034)); +#290029 = SURFACE_STYLE_USAGE(.BOTH.,#290030); +#290030 = SURFACE_SIDE_STYLE('',(#290031)); +#290031 = SURFACE_STYLE_FILL_AREA(#290032); +#290032 = FILL_AREA_STYLE('',(#290033)); +#290033 = FILL_AREA_STYLE_COLOUR('',#285989); +#290034 = CURVE_STYLE('',#290035,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290035 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290036 = OVER_RIDING_STYLED_ITEM('overriding color',(#290037),#27789, + #290018); +#290037 = PRESENTATION_STYLE_ASSIGNMENT((#290038,#290043)); +#290038 = SURFACE_STYLE_USAGE(.BOTH.,#290039); +#290039 = SURFACE_SIDE_STYLE('',(#290040)); +#290040 = SURFACE_STYLE_FILL_AREA(#290041); +#290041 = FILL_AREA_STYLE('',(#290042)); +#290042 = FILL_AREA_STYLE_COLOUR('',#285989); +#290043 = CURVE_STYLE('',#290044,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290044 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290045 = STYLED_ITEM('color',(#290046),#27815); +#290046 = PRESENTATION_STYLE_ASSIGNMENT((#290047,#290052)); +#290047 = SURFACE_STYLE_USAGE(.BOTH.,#290048); +#290048 = SURFACE_SIDE_STYLE('',(#290049)); +#290049 = SURFACE_STYLE_FILL_AREA(#290050); +#290050 = FILL_AREA_STYLE('',(#290051)); +#290051 = FILL_AREA_STYLE_COLOUR('',#270350); +#290052 = CURVE_STYLE('',#290053,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290053 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290054 = STYLED_ITEM('color',(#290055),#27839); +#290055 = PRESENTATION_STYLE_ASSIGNMENT((#290056,#290061)); +#290056 = SURFACE_STYLE_USAGE(.BOTH.,#290057); +#290057 = SURFACE_SIDE_STYLE('',(#290058)); +#290058 = SURFACE_STYLE_FILL_AREA(#290059); +#290059 = FILL_AREA_STYLE('',(#290060)); +#290060 = FILL_AREA_STYLE_COLOUR('',#270350); +#290061 = CURVE_STYLE('',#290062,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290062 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290063 = OVER_RIDING_STYLED_ITEM('overriding color',(#290064),#27853, + #290054); +#290064 = PRESENTATION_STYLE_ASSIGNMENT((#290065,#290070)); +#290065 = SURFACE_STYLE_USAGE(.BOTH.,#290066); +#290066 = SURFACE_SIDE_STYLE('',(#290067)); +#290067 = SURFACE_STYLE_FILL_AREA(#290068); +#290068 = FILL_AREA_STYLE('',(#290069)); +#290069 = FILL_AREA_STYLE_COLOUR('',#285989); +#290070 = CURVE_STYLE('',#290071,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290071 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290072 = OVER_RIDING_STYLED_ITEM('overriding color',(#290073),#27869, + #290054); +#290073 = PRESENTATION_STYLE_ASSIGNMENT((#290074,#290079)); +#290074 = SURFACE_STYLE_USAGE(.BOTH.,#290075); +#290075 = SURFACE_SIDE_STYLE('',(#290076)); +#290076 = SURFACE_STYLE_FILL_AREA(#290077); +#290077 = FILL_AREA_STYLE('',(#290078)); +#290078 = FILL_AREA_STYLE_COLOUR('',#285989); +#290079 = CURVE_STYLE('',#290080,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290080 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290081 = STYLED_ITEM('color',(#290082),#27888); +#290082 = PRESENTATION_STYLE_ASSIGNMENT((#290083,#290088)); +#290083 = SURFACE_STYLE_USAGE(.BOTH.,#290084); +#290084 = SURFACE_SIDE_STYLE('',(#290085)); +#290085 = SURFACE_STYLE_FILL_AREA(#290086); +#290086 = FILL_AREA_STYLE('',(#290087)); +#290087 = FILL_AREA_STYLE_COLOUR('',#270350); +#290088 = CURVE_STYLE('',#290089,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290089 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290090 = STYLED_ITEM('color',(#290091),#27919); +#290091 = PRESENTATION_STYLE_ASSIGNMENT((#290092,#290097)); +#290092 = SURFACE_STYLE_USAGE(.BOTH.,#290093); +#290093 = SURFACE_SIDE_STYLE('',(#290094)); +#290094 = SURFACE_STYLE_FILL_AREA(#290095); +#290095 = FILL_AREA_STYLE('',(#290096)); +#290096 = FILL_AREA_STYLE_COLOUR('',#270350); +#290097 = CURVE_STYLE('',#290098,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290098 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290099 = OVER_RIDING_STYLED_ITEM('overriding color',(#290100),#27933, + #290090); +#290100 = PRESENTATION_STYLE_ASSIGNMENT((#290101,#290106)); +#290101 = SURFACE_STYLE_USAGE(.BOTH.,#290102); +#290102 = SURFACE_SIDE_STYLE('',(#290103)); +#290103 = SURFACE_STYLE_FILL_AREA(#290104); +#290104 = FILL_AREA_STYLE('',(#290105)); +#290105 = FILL_AREA_STYLE_COLOUR('',#285989); +#290106 = CURVE_STYLE('',#290107,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290107 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290108 = OVER_RIDING_STYLED_ITEM('overriding color',(#290109),#27949, + #290090); +#290109 = PRESENTATION_STYLE_ASSIGNMENT((#290110,#290115)); +#290110 = SURFACE_STYLE_USAGE(.BOTH.,#290111); +#290111 = SURFACE_SIDE_STYLE('',(#290112)); +#290112 = SURFACE_STYLE_FILL_AREA(#290113); +#290113 = FILL_AREA_STYLE('',(#290114)); +#290114 = FILL_AREA_STYLE_COLOUR('',#285989); +#290115 = CURVE_STYLE('',#290116,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290116 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290117 = STYLED_ITEM('color',(#290118),#27975); +#290118 = PRESENTATION_STYLE_ASSIGNMENT((#290119,#290124)); +#290119 = SURFACE_STYLE_USAGE(.BOTH.,#290120); +#290120 = SURFACE_SIDE_STYLE('',(#290121)); +#290121 = SURFACE_STYLE_FILL_AREA(#290122); +#290122 = FILL_AREA_STYLE('',(#290123)); +#290123 = FILL_AREA_STYLE_COLOUR('',#270350); +#290124 = CURVE_STYLE('',#290125,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290125 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290126 = STYLED_ITEM('color',(#290127),#27999); +#290127 = PRESENTATION_STYLE_ASSIGNMENT((#290128,#290133)); +#290128 = SURFACE_STYLE_USAGE(.BOTH.,#290129); +#290129 = SURFACE_SIDE_STYLE('',(#290130)); +#290130 = SURFACE_STYLE_FILL_AREA(#290131); +#290131 = FILL_AREA_STYLE('',(#290132)); +#290132 = FILL_AREA_STYLE_COLOUR('',#270350); +#290133 = CURVE_STYLE('',#290134,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290134 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290135 = OVER_RIDING_STYLED_ITEM('overriding color',(#290136),#28013, + #290126); +#290136 = PRESENTATION_STYLE_ASSIGNMENT((#290137,#290142)); +#290137 = SURFACE_STYLE_USAGE(.BOTH.,#290138); +#290138 = SURFACE_SIDE_STYLE('',(#290139)); +#290139 = SURFACE_STYLE_FILL_AREA(#290140); +#290140 = FILL_AREA_STYLE('',(#290141)); +#290141 = FILL_AREA_STYLE_COLOUR('',#285989); +#290142 = CURVE_STYLE('',#290143,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290143 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290144 = OVER_RIDING_STYLED_ITEM('overriding color',(#290145),#28029, + #290126); +#290145 = PRESENTATION_STYLE_ASSIGNMENT((#290146,#290151)); +#290146 = SURFACE_STYLE_USAGE(.BOTH.,#290147); +#290147 = SURFACE_SIDE_STYLE('',(#290148)); +#290148 = SURFACE_STYLE_FILL_AREA(#290149); +#290149 = FILL_AREA_STYLE('',(#290150)); +#290150 = FILL_AREA_STYLE_COLOUR('',#285989); +#290151 = CURVE_STYLE('',#290152,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290152 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290153 = STYLED_ITEM('color',(#290154),#28048); +#290154 = PRESENTATION_STYLE_ASSIGNMENT((#290155,#290160)); +#290155 = SURFACE_STYLE_USAGE(.BOTH.,#290156); +#290156 = SURFACE_SIDE_STYLE('',(#290157)); +#290157 = SURFACE_STYLE_FILL_AREA(#290158); +#290158 = FILL_AREA_STYLE('',(#290159)); +#290159 = FILL_AREA_STYLE_COLOUR('',#270350); +#290160 = CURVE_STYLE('',#290161,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290161 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290162 = STYLED_ITEM('color',(#290163),#28079); +#290163 = PRESENTATION_STYLE_ASSIGNMENT((#290164,#290169)); +#290164 = SURFACE_STYLE_USAGE(.BOTH.,#290165); +#290165 = SURFACE_SIDE_STYLE('',(#290166)); +#290166 = SURFACE_STYLE_FILL_AREA(#290167); +#290167 = FILL_AREA_STYLE('',(#290168)); +#290168 = FILL_AREA_STYLE_COLOUR('',#270350); +#290169 = CURVE_STYLE('',#290170,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290170 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290171 = OVER_RIDING_STYLED_ITEM('overriding color',(#290172),#28093, + #290162); +#290172 = PRESENTATION_STYLE_ASSIGNMENT((#290173,#290178)); +#290173 = SURFACE_STYLE_USAGE(.BOTH.,#290174); +#290174 = SURFACE_SIDE_STYLE('',(#290175)); +#290175 = SURFACE_STYLE_FILL_AREA(#290176); +#290176 = FILL_AREA_STYLE('',(#290177)); +#290177 = FILL_AREA_STYLE_COLOUR('',#285989); +#290178 = CURVE_STYLE('',#290179,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290179 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290180 = OVER_RIDING_STYLED_ITEM('overriding color',(#290181),#28109, + #290162); +#290181 = PRESENTATION_STYLE_ASSIGNMENT((#290182,#290187)); +#290182 = SURFACE_STYLE_USAGE(.BOTH.,#290183); +#290183 = SURFACE_SIDE_STYLE('',(#290184)); +#290184 = SURFACE_STYLE_FILL_AREA(#290185); +#290185 = FILL_AREA_STYLE('',(#290186)); +#290186 = FILL_AREA_STYLE_COLOUR('',#285989); +#290187 = CURVE_STYLE('',#290188,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290188 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290189 = STYLED_ITEM('color',(#290190),#28135); +#290190 = PRESENTATION_STYLE_ASSIGNMENT((#290191,#290196)); +#290191 = SURFACE_STYLE_USAGE(.BOTH.,#290192); +#290192 = SURFACE_SIDE_STYLE('',(#290193)); +#290193 = SURFACE_STYLE_FILL_AREA(#290194); +#290194 = FILL_AREA_STYLE('',(#290195)); +#290195 = FILL_AREA_STYLE_COLOUR('',#270350); +#290196 = CURVE_STYLE('',#290197,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290197 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290198 = STYLED_ITEM('color',(#290199),#28159); +#290199 = PRESENTATION_STYLE_ASSIGNMENT((#290200,#290205)); +#290200 = SURFACE_STYLE_USAGE(.BOTH.,#290201); +#290201 = SURFACE_SIDE_STYLE('',(#290202)); +#290202 = SURFACE_STYLE_FILL_AREA(#290203); +#290203 = FILL_AREA_STYLE('',(#290204)); +#290204 = FILL_AREA_STYLE_COLOUR('',#270350); +#290205 = CURVE_STYLE('',#290206,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290206 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290207 = OVER_RIDING_STYLED_ITEM('overriding color',(#290208),#28173, + #290198); +#290208 = PRESENTATION_STYLE_ASSIGNMENT((#290209,#290214)); +#290209 = SURFACE_STYLE_USAGE(.BOTH.,#290210); +#290210 = SURFACE_SIDE_STYLE('',(#290211)); +#290211 = SURFACE_STYLE_FILL_AREA(#290212); +#290212 = FILL_AREA_STYLE('',(#290213)); +#290213 = FILL_AREA_STYLE_COLOUR('',#285989); +#290214 = CURVE_STYLE('',#290215,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290215 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290216 = OVER_RIDING_STYLED_ITEM('overriding color',(#290217),#28189, + #290198); +#290217 = PRESENTATION_STYLE_ASSIGNMENT((#290218,#290223)); +#290218 = SURFACE_STYLE_USAGE(.BOTH.,#290219); +#290219 = SURFACE_SIDE_STYLE('',(#290220)); +#290220 = SURFACE_STYLE_FILL_AREA(#290221); +#290221 = FILL_AREA_STYLE('',(#290222)); +#290222 = FILL_AREA_STYLE_COLOUR('',#285989); +#290223 = CURVE_STYLE('',#290224,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290224 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290225 = STYLED_ITEM('color',(#290226),#28208); +#290226 = PRESENTATION_STYLE_ASSIGNMENT((#290227,#290232)); +#290227 = SURFACE_STYLE_USAGE(.BOTH.,#290228); +#290228 = SURFACE_SIDE_STYLE('',(#290229)); +#290229 = SURFACE_STYLE_FILL_AREA(#290230); +#290230 = FILL_AREA_STYLE('',(#290231)); +#290231 = FILL_AREA_STYLE_COLOUR('',#270350); +#290232 = CURVE_STYLE('',#290233,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290233 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290234 = STYLED_ITEM('color',(#290235),#28239); +#290235 = PRESENTATION_STYLE_ASSIGNMENT((#290236,#290241)); +#290236 = SURFACE_STYLE_USAGE(.BOTH.,#290237); +#290237 = SURFACE_SIDE_STYLE('',(#290238)); +#290238 = SURFACE_STYLE_FILL_AREA(#290239); +#290239 = FILL_AREA_STYLE('',(#290240)); +#290240 = FILL_AREA_STYLE_COLOUR('',#270350); +#290241 = CURVE_STYLE('',#290242,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290242 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290243 = OVER_RIDING_STYLED_ITEM('overriding color',(#290244),#28253, + #290234); +#290244 = PRESENTATION_STYLE_ASSIGNMENT((#290245,#290250)); +#290245 = SURFACE_STYLE_USAGE(.BOTH.,#290246); +#290246 = SURFACE_SIDE_STYLE('',(#290247)); +#290247 = SURFACE_STYLE_FILL_AREA(#290248); +#290248 = FILL_AREA_STYLE('',(#290249)); +#290249 = FILL_AREA_STYLE_COLOUR('',#285989); +#290250 = CURVE_STYLE('',#290251,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290251 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290252 = OVER_RIDING_STYLED_ITEM('overriding color',(#290253),#28269, + #290234); +#290253 = PRESENTATION_STYLE_ASSIGNMENT((#290254,#290259)); +#290254 = SURFACE_STYLE_USAGE(.BOTH.,#290255); +#290255 = SURFACE_SIDE_STYLE('',(#290256)); +#290256 = SURFACE_STYLE_FILL_AREA(#290257); +#290257 = FILL_AREA_STYLE('',(#290258)); +#290258 = FILL_AREA_STYLE_COLOUR('',#285989); +#290259 = CURVE_STYLE('',#290260,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290260 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290261 = STYLED_ITEM('color',(#290262),#28295); +#290262 = PRESENTATION_STYLE_ASSIGNMENT((#290263,#290268)); +#290263 = SURFACE_STYLE_USAGE(.BOTH.,#290264); +#290264 = SURFACE_SIDE_STYLE('',(#290265)); +#290265 = SURFACE_STYLE_FILL_AREA(#290266); +#290266 = FILL_AREA_STYLE('',(#290267)); +#290267 = FILL_AREA_STYLE_COLOUR('',#270350); +#290268 = CURVE_STYLE('',#290269,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290269 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290270 = STYLED_ITEM('color',(#290271),#28319); +#290271 = PRESENTATION_STYLE_ASSIGNMENT((#290272,#290277)); +#290272 = SURFACE_STYLE_USAGE(.BOTH.,#290273); +#290273 = SURFACE_SIDE_STYLE('',(#290274)); +#290274 = SURFACE_STYLE_FILL_AREA(#290275); +#290275 = FILL_AREA_STYLE('',(#290276)); +#290276 = FILL_AREA_STYLE_COLOUR('',#270350); +#290277 = CURVE_STYLE('',#290278,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290278 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290279 = OVER_RIDING_STYLED_ITEM('overriding color',(#290280),#28333, + #290270); +#290280 = PRESENTATION_STYLE_ASSIGNMENT((#290281,#290286)); +#290281 = SURFACE_STYLE_USAGE(.BOTH.,#290282); +#290282 = SURFACE_SIDE_STYLE('',(#290283)); +#290283 = SURFACE_STYLE_FILL_AREA(#290284); +#290284 = FILL_AREA_STYLE('',(#290285)); +#290285 = FILL_AREA_STYLE_COLOUR('',#285989); +#290286 = CURVE_STYLE('',#290287,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290287 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290288 = OVER_RIDING_STYLED_ITEM('overriding color',(#290289),#28349, + #290270); +#290289 = PRESENTATION_STYLE_ASSIGNMENT((#290290,#290295)); +#290290 = SURFACE_STYLE_USAGE(.BOTH.,#290291); +#290291 = SURFACE_SIDE_STYLE('',(#290292)); +#290292 = SURFACE_STYLE_FILL_AREA(#290293); +#290293 = FILL_AREA_STYLE('',(#290294)); +#290294 = FILL_AREA_STYLE_COLOUR('',#285989); +#290295 = CURVE_STYLE('',#290296,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290296 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290297 = STYLED_ITEM('color',(#290298),#28368); +#290298 = PRESENTATION_STYLE_ASSIGNMENT((#290299,#290304)); +#290299 = SURFACE_STYLE_USAGE(.BOTH.,#290300); +#290300 = SURFACE_SIDE_STYLE('',(#290301)); +#290301 = SURFACE_STYLE_FILL_AREA(#290302); +#290302 = FILL_AREA_STYLE('',(#290303)); +#290303 = FILL_AREA_STYLE_COLOUR('',#270350); +#290304 = CURVE_STYLE('',#290305,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290305 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290306 = STYLED_ITEM('color',(#290307),#28399); +#290307 = PRESENTATION_STYLE_ASSIGNMENT((#290308,#290313)); +#290308 = SURFACE_STYLE_USAGE(.BOTH.,#290309); +#290309 = SURFACE_SIDE_STYLE('',(#290310)); +#290310 = SURFACE_STYLE_FILL_AREA(#290311); +#290311 = FILL_AREA_STYLE('',(#290312)); +#290312 = FILL_AREA_STYLE_COLOUR('',#270350); +#290313 = CURVE_STYLE('',#290314,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290314 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290315 = OVER_RIDING_STYLED_ITEM('overriding color',(#290316),#28413, + #290306); +#290316 = PRESENTATION_STYLE_ASSIGNMENT((#290317,#290322)); +#290317 = SURFACE_STYLE_USAGE(.BOTH.,#290318); +#290318 = SURFACE_SIDE_STYLE('',(#290319)); +#290319 = SURFACE_STYLE_FILL_AREA(#290320); +#290320 = FILL_AREA_STYLE('',(#290321)); +#290321 = FILL_AREA_STYLE_COLOUR('',#285989); +#290322 = CURVE_STYLE('',#290323,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290323 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290324 = OVER_RIDING_STYLED_ITEM('overriding color',(#290325),#28429, + #290306); +#290325 = PRESENTATION_STYLE_ASSIGNMENT((#290326,#290331)); +#290326 = SURFACE_STYLE_USAGE(.BOTH.,#290327); +#290327 = SURFACE_SIDE_STYLE('',(#290328)); +#290328 = SURFACE_STYLE_FILL_AREA(#290329); +#290329 = FILL_AREA_STYLE('',(#290330)); +#290330 = FILL_AREA_STYLE_COLOUR('',#285989); +#290331 = CURVE_STYLE('',#290332,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290332 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290333 = STYLED_ITEM('color',(#290334),#28455); +#290334 = PRESENTATION_STYLE_ASSIGNMENT((#290335,#290340)); +#290335 = SURFACE_STYLE_USAGE(.BOTH.,#290336); +#290336 = SURFACE_SIDE_STYLE('',(#290337)); +#290337 = SURFACE_STYLE_FILL_AREA(#290338); +#290338 = FILL_AREA_STYLE('',(#290339)); +#290339 = FILL_AREA_STYLE_COLOUR('',#270350); +#290340 = CURVE_STYLE('',#290341,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290341 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290342 = STYLED_ITEM('color',(#290343),#28479); +#290343 = PRESENTATION_STYLE_ASSIGNMENT((#290344,#290349)); +#290344 = SURFACE_STYLE_USAGE(.BOTH.,#290345); +#290345 = SURFACE_SIDE_STYLE('',(#290346)); +#290346 = SURFACE_STYLE_FILL_AREA(#290347); +#290347 = FILL_AREA_STYLE('',(#290348)); +#290348 = FILL_AREA_STYLE_COLOUR('',#270350); +#290349 = CURVE_STYLE('',#290350,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290350 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290351 = OVER_RIDING_STYLED_ITEM('overriding color',(#290352),#28493, + #290342); +#290352 = PRESENTATION_STYLE_ASSIGNMENT((#290353,#290358)); +#290353 = SURFACE_STYLE_USAGE(.BOTH.,#290354); +#290354 = SURFACE_SIDE_STYLE('',(#290355)); +#290355 = SURFACE_STYLE_FILL_AREA(#290356); +#290356 = FILL_AREA_STYLE('',(#290357)); +#290357 = FILL_AREA_STYLE_COLOUR('',#285989); +#290358 = CURVE_STYLE('',#290359,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290359 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290360 = OVER_RIDING_STYLED_ITEM('overriding color',(#290361),#28509, + #290342); +#290361 = PRESENTATION_STYLE_ASSIGNMENT((#290362,#290367)); +#290362 = SURFACE_STYLE_USAGE(.BOTH.,#290363); +#290363 = SURFACE_SIDE_STYLE('',(#290364)); +#290364 = SURFACE_STYLE_FILL_AREA(#290365); +#290365 = FILL_AREA_STYLE('',(#290366)); +#290366 = FILL_AREA_STYLE_COLOUR('',#285989); +#290367 = CURVE_STYLE('',#290368,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290368 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290369 = STYLED_ITEM('color',(#290370),#28528); +#290370 = PRESENTATION_STYLE_ASSIGNMENT((#290371,#290376)); +#290371 = SURFACE_STYLE_USAGE(.BOTH.,#290372); +#290372 = SURFACE_SIDE_STYLE('',(#290373)); +#290373 = SURFACE_STYLE_FILL_AREA(#290374); +#290374 = FILL_AREA_STYLE('',(#290375)); +#290375 = FILL_AREA_STYLE_COLOUR('',#270350); +#290376 = CURVE_STYLE('',#290377,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290377 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290378 = STYLED_ITEM('color',(#290379),#28559); +#290379 = PRESENTATION_STYLE_ASSIGNMENT((#290380,#290385)); +#290380 = SURFACE_STYLE_USAGE(.BOTH.,#290381); +#290381 = SURFACE_SIDE_STYLE('',(#290382)); +#290382 = SURFACE_STYLE_FILL_AREA(#290383); +#290383 = FILL_AREA_STYLE('',(#290384)); +#290384 = FILL_AREA_STYLE_COLOUR('',#270350); +#290385 = CURVE_STYLE('',#290386,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290386 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290387 = OVER_RIDING_STYLED_ITEM('overriding color',(#290388),#28573, + #290378); +#290388 = PRESENTATION_STYLE_ASSIGNMENT((#290389,#290394)); +#290389 = SURFACE_STYLE_USAGE(.BOTH.,#290390); +#290390 = SURFACE_SIDE_STYLE('',(#290391)); +#290391 = SURFACE_STYLE_FILL_AREA(#290392); +#290392 = FILL_AREA_STYLE('',(#290393)); +#290393 = FILL_AREA_STYLE_COLOUR('',#285989); +#290394 = CURVE_STYLE('',#290395,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290395 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290396 = OVER_RIDING_STYLED_ITEM('overriding color',(#290397),#28589, + #290378); +#290397 = PRESENTATION_STYLE_ASSIGNMENT((#290398,#290403)); +#290398 = SURFACE_STYLE_USAGE(.BOTH.,#290399); +#290399 = SURFACE_SIDE_STYLE('',(#290400)); +#290400 = SURFACE_STYLE_FILL_AREA(#290401); +#290401 = FILL_AREA_STYLE('',(#290402)); +#290402 = FILL_AREA_STYLE_COLOUR('',#285989); +#290403 = CURVE_STYLE('',#290404,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290404 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290405 = STYLED_ITEM('color',(#290406),#28615); +#290406 = PRESENTATION_STYLE_ASSIGNMENT((#290407,#290412)); +#290407 = SURFACE_STYLE_USAGE(.BOTH.,#290408); +#290408 = SURFACE_SIDE_STYLE('',(#290409)); +#290409 = SURFACE_STYLE_FILL_AREA(#290410); +#290410 = FILL_AREA_STYLE('',(#290411)); +#290411 = FILL_AREA_STYLE_COLOUR('',#270350); +#290412 = CURVE_STYLE('',#290413,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290413 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290414 = STYLED_ITEM('color',(#290415),#28639); +#290415 = PRESENTATION_STYLE_ASSIGNMENT((#290416,#290421)); +#290416 = SURFACE_STYLE_USAGE(.BOTH.,#290417); +#290417 = SURFACE_SIDE_STYLE('',(#290418)); +#290418 = SURFACE_STYLE_FILL_AREA(#290419); +#290419 = FILL_AREA_STYLE('',(#290420)); +#290420 = FILL_AREA_STYLE_COLOUR('',#270350); +#290421 = CURVE_STYLE('',#290422,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290422 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290423 = OVER_RIDING_STYLED_ITEM('overriding color',(#290424),#28653, + #290414); +#290424 = PRESENTATION_STYLE_ASSIGNMENT((#290425,#290430)); +#290425 = SURFACE_STYLE_USAGE(.BOTH.,#290426); +#290426 = SURFACE_SIDE_STYLE('',(#290427)); +#290427 = SURFACE_STYLE_FILL_AREA(#290428); +#290428 = FILL_AREA_STYLE('',(#290429)); +#290429 = FILL_AREA_STYLE_COLOUR('',#285989); +#290430 = CURVE_STYLE('',#290431,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290431 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290432 = OVER_RIDING_STYLED_ITEM('overriding color',(#290433),#28669, + #290414); +#290433 = PRESENTATION_STYLE_ASSIGNMENT((#290434,#290439)); +#290434 = SURFACE_STYLE_USAGE(.BOTH.,#290435); +#290435 = SURFACE_SIDE_STYLE('',(#290436)); +#290436 = SURFACE_STYLE_FILL_AREA(#290437); +#290437 = FILL_AREA_STYLE('',(#290438)); +#290438 = FILL_AREA_STYLE_COLOUR('',#285989); +#290439 = CURVE_STYLE('',#290440,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290440 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290441 = STYLED_ITEM('color',(#290442),#28688); +#290442 = PRESENTATION_STYLE_ASSIGNMENT((#290443,#290448)); +#290443 = SURFACE_STYLE_USAGE(.BOTH.,#290444); +#290444 = SURFACE_SIDE_STYLE('',(#290445)); +#290445 = SURFACE_STYLE_FILL_AREA(#290446); +#290446 = FILL_AREA_STYLE('',(#290447)); +#290447 = FILL_AREA_STYLE_COLOUR('',#270350); +#290448 = CURVE_STYLE('',#290449,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290450 = STYLED_ITEM('color',(#290451),#28719); +#290451 = PRESENTATION_STYLE_ASSIGNMENT((#290452,#290457)); +#290452 = SURFACE_STYLE_USAGE(.BOTH.,#290453); +#290453 = SURFACE_SIDE_STYLE('',(#290454)); +#290454 = SURFACE_STYLE_FILL_AREA(#290455); +#290455 = FILL_AREA_STYLE('',(#290456)); +#290456 = FILL_AREA_STYLE_COLOUR('',#270350); +#290457 = CURVE_STYLE('',#290458,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290458 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290459 = OVER_RIDING_STYLED_ITEM('overriding color',(#290460),#28733, + #290450); +#290460 = PRESENTATION_STYLE_ASSIGNMENT((#290461,#290466)); +#290461 = SURFACE_STYLE_USAGE(.BOTH.,#290462); +#290462 = SURFACE_SIDE_STYLE('',(#290463)); +#290463 = SURFACE_STYLE_FILL_AREA(#290464); +#290464 = FILL_AREA_STYLE('',(#290465)); +#290465 = FILL_AREA_STYLE_COLOUR('',#285989); +#290466 = CURVE_STYLE('',#290467,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290467 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290468 = OVER_RIDING_STYLED_ITEM('overriding color',(#290469),#28749, + #290450); +#290469 = PRESENTATION_STYLE_ASSIGNMENT((#290470,#290475)); +#290470 = SURFACE_STYLE_USAGE(.BOTH.,#290471); +#290471 = SURFACE_SIDE_STYLE('',(#290472)); +#290472 = SURFACE_STYLE_FILL_AREA(#290473); +#290473 = FILL_AREA_STYLE('',(#290474)); +#290474 = FILL_AREA_STYLE_COLOUR('',#285989); +#290475 = CURVE_STYLE('',#290476,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290476 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290477 = STYLED_ITEM('color',(#290478),#28775); +#290478 = PRESENTATION_STYLE_ASSIGNMENT((#290479,#290484)); +#290479 = SURFACE_STYLE_USAGE(.BOTH.,#290480); +#290480 = SURFACE_SIDE_STYLE('',(#290481)); +#290481 = SURFACE_STYLE_FILL_AREA(#290482); +#290482 = FILL_AREA_STYLE('',(#290483)); +#290483 = FILL_AREA_STYLE_COLOUR('',#270350); +#290484 = CURVE_STYLE('',#290485,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290485 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290486 = STYLED_ITEM('color',(#290487),#28799); +#290487 = PRESENTATION_STYLE_ASSIGNMENT((#290488,#290493)); +#290488 = SURFACE_STYLE_USAGE(.BOTH.,#290489); +#290489 = SURFACE_SIDE_STYLE('',(#290490)); +#290490 = SURFACE_STYLE_FILL_AREA(#290491); +#290491 = FILL_AREA_STYLE('',(#290492)); +#290492 = FILL_AREA_STYLE_COLOUR('',#270350); +#290493 = CURVE_STYLE('',#290494,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290494 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290495 = OVER_RIDING_STYLED_ITEM('overriding color',(#290496),#28813, + #290486); +#290496 = PRESENTATION_STYLE_ASSIGNMENT((#290497,#290502)); +#290497 = SURFACE_STYLE_USAGE(.BOTH.,#290498); +#290498 = SURFACE_SIDE_STYLE('',(#290499)); +#290499 = SURFACE_STYLE_FILL_AREA(#290500); +#290500 = FILL_AREA_STYLE('',(#290501)); +#290501 = FILL_AREA_STYLE_COLOUR('',#285989); +#290502 = CURVE_STYLE('',#290503,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290504 = OVER_RIDING_STYLED_ITEM('overriding color',(#290505),#28829, + #290486); +#290505 = PRESENTATION_STYLE_ASSIGNMENT((#290506,#290511)); +#290506 = SURFACE_STYLE_USAGE(.BOTH.,#290507); +#290507 = SURFACE_SIDE_STYLE('',(#290508)); +#290508 = SURFACE_STYLE_FILL_AREA(#290509); +#290509 = FILL_AREA_STYLE('',(#290510)); +#290510 = FILL_AREA_STYLE_COLOUR('',#285989); +#290511 = CURVE_STYLE('',#290512,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290513 = STYLED_ITEM('color',(#290514),#28848); +#290514 = PRESENTATION_STYLE_ASSIGNMENT((#290515,#290520)); +#290515 = SURFACE_STYLE_USAGE(.BOTH.,#290516); +#290516 = SURFACE_SIDE_STYLE('',(#290517)); +#290517 = SURFACE_STYLE_FILL_AREA(#290518); +#290518 = FILL_AREA_STYLE('',(#290519)); +#290519 = FILL_AREA_STYLE_COLOUR('',#270350); +#290520 = CURVE_STYLE('',#290521,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290522 = STYLED_ITEM('color',(#290523),#28879); +#290523 = PRESENTATION_STYLE_ASSIGNMENT((#290524,#290529)); +#290524 = SURFACE_STYLE_USAGE(.BOTH.,#290525); +#290525 = SURFACE_SIDE_STYLE('',(#290526)); +#290526 = SURFACE_STYLE_FILL_AREA(#290527); +#290527 = FILL_AREA_STYLE('',(#290528)); +#290528 = FILL_AREA_STYLE_COLOUR('',#270350); +#290529 = CURVE_STYLE('',#290530,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290531 = OVER_RIDING_STYLED_ITEM('overriding color',(#290532),#28893, + #290522); +#290532 = PRESENTATION_STYLE_ASSIGNMENT((#290533,#290538)); +#290533 = SURFACE_STYLE_USAGE(.BOTH.,#290534); +#290534 = SURFACE_SIDE_STYLE('',(#290535)); +#290535 = SURFACE_STYLE_FILL_AREA(#290536); +#290536 = FILL_AREA_STYLE('',(#290537)); +#290537 = FILL_AREA_STYLE_COLOUR('',#285989); +#290538 = CURVE_STYLE('',#290539,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290539 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290540 = OVER_RIDING_STYLED_ITEM('overriding color',(#290541),#28909, + #290522); +#290541 = PRESENTATION_STYLE_ASSIGNMENT((#290542,#290547)); +#290542 = SURFACE_STYLE_USAGE(.BOTH.,#290543); +#290543 = SURFACE_SIDE_STYLE('',(#290544)); +#290544 = SURFACE_STYLE_FILL_AREA(#290545); +#290545 = FILL_AREA_STYLE('',(#290546)); +#290546 = FILL_AREA_STYLE_COLOUR('',#285989); +#290547 = CURVE_STYLE('',#290548,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290548 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290549 = STYLED_ITEM('color',(#290550),#28935); +#290550 = PRESENTATION_STYLE_ASSIGNMENT((#290551,#290556)); +#290551 = SURFACE_STYLE_USAGE(.BOTH.,#290552); +#290552 = SURFACE_SIDE_STYLE('',(#290553)); +#290553 = SURFACE_STYLE_FILL_AREA(#290554); +#290554 = FILL_AREA_STYLE('',(#290555)); +#290555 = FILL_AREA_STYLE_COLOUR('',#270350); +#290556 = CURVE_STYLE('',#290557,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290557 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290558 = STYLED_ITEM('color',(#290559),#28959); +#290559 = PRESENTATION_STYLE_ASSIGNMENT((#290560,#290565)); +#290560 = SURFACE_STYLE_USAGE(.BOTH.,#290561); +#290561 = SURFACE_SIDE_STYLE('',(#290562)); +#290562 = SURFACE_STYLE_FILL_AREA(#290563); +#290563 = FILL_AREA_STYLE('',(#290564)); +#290564 = FILL_AREA_STYLE_COLOUR('',#270350); +#290565 = CURVE_STYLE('',#290566,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290566 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290567 = OVER_RIDING_STYLED_ITEM('overriding color',(#290568),#28973, + #290558); +#290568 = PRESENTATION_STYLE_ASSIGNMENT((#290569,#290574)); +#290569 = SURFACE_STYLE_USAGE(.BOTH.,#290570); +#290570 = SURFACE_SIDE_STYLE('',(#290571)); +#290571 = SURFACE_STYLE_FILL_AREA(#290572); +#290572 = FILL_AREA_STYLE('',(#290573)); +#290573 = FILL_AREA_STYLE_COLOUR('',#285989); +#290574 = CURVE_STYLE('',#290575,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290575 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290576 = OVER_RIDING_STYLED_ITEM('overriding color',(#290577),#28989, + #290558); +#290577 = PRESENTATION_STYLE_ASSIGNMENT((#290578,#290583)); +#290578 = SURFACE_STYLE_USAGE(.BOTH.,#290579); +#290579 = SURFACE_SIDE_STYLE('',(#290580)); +#290580 = SURFACE_STYLE_FILL_AREA(#290581); +#290581 = FILL_AREA_STYLE('',(#290582)); +#290582 = FILL_AREA_STYLE_COLOUR('',#285989); +#290583 = CURVE_STYLE('',#290584,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290584 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290585 = STYLED_ITEM('color',(#290586),#29008); +#290586 = PRESENTATION_STYLE_ASSIGNMENT((#290587,#290592)); +#290587 = SURFACE_STYLE_USAGE(.BOTH.,#290588); +#290588 = SURFACE_SIDE_STYLE('',(#290589)); +#290589 = SURFACE_STYLE_FILL_AREA(#290590); +#290590 = FILL_AREA_STYLE('',(#290591)); +#290591 = FILL_AREA_STYLE_COLOUR('',#270350); +#290592 = CURVE_STYLE('',#290593,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290593 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290594 = STYLED_ITEM('color',(#290595),#29039); +#290595 = PRESENTATION_STYLE_ASSIGNMENT((#290596,#290601)); +#290596 = SURFACE_STYLE_USAGE(.BOTH.,#290597); +#290597 = SURFACE_SIDE_STYLE('',(#290598)); +#290598 = SURFACE_STYLE_FILL_AREA(#290599); +#290599 = FILL_AREA_STYLE('',(#290600)); +#290600 = FILL_AREA_STYLE_COLOUR('',#270350); +#290601 = CURVE_STYLE('',#290602,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290602 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290603 = OVER_RIDING_STYLED_ITEM('overriding color',(#290604),#29053, + #290594); +#290604 = PRESENTATION_STYLE_ASSIGNMENT((#290605,#290610)); +#290605 = SURFACE_STYLE_USAGE(.BOTH.,#290606); +#290606 = SURFACE_SIDE_STYLE('',(#290607)); +#290607 = SURFACE_STYLE_FILL_AREA(#290608); +#290608 = FILL_AREA_STYLE('',(#290609)); +#290609 = FILL_AREA_STYLE_COLOUR('',#285989); +#290610 = CURVE_STYLE('',#290611,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290611 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290612 = OVER_RIDING_STYLED_ITEM('overriding color',(#290613),#29069, + #290594); +#290613 = PRESENTATION_STYLE_ASSIGNMENT((#290614,#290619)); +#290614 = SURFACE_STYLE_USAGE(.BOTH.,#290615); +#290615 = SURFACE_SIDE_STYLE('',(#290616)); +#290616 = SURFACE_STYLE_FILL_AREA(#290617); +#290617 = FILL_AREA_STYLE('',(#290618)); +#290618 = FILL_AREA_STYLE_COLOUR('',#285989); +#290619 = CURVE_STYLE('',#290620,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290620 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290621 = STYLED_ITEM('color',(#290622),#29095); +#290622 = PRESENTATION_STYLE_ASSIGNMENT((#290623,#290628)); +#290623 = SURFACE_STYLE_USAGE(.BOTH.,#290624); +#290624 = SURFACE_SIDE_STYLE('',(#290625)); +#290625 = SURFACE_STYLE_FILL_AREA(#290626); +#290626 = FILL_AREA_STYLE('',(#290627)); +#290627 = FILL_AREA_STYLE_COLOUR('',#270350); +#290628 = CURVE_STYLE('',#290629,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290629 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290630 = STYLED_ITEM('color',(#290631),#29119); +#290631 = PRESENTATION_STYLE_ASSIGNMENT((#290632,#290637)); +#290632 = SURFACE_STYLE_USAGE(.BOTH.,#290633); +#290633 = SURFACE_SIDE_STYLE('',(#290634)); +#290634 = SURFACE_STYLE_FILL_AREA(#290635); +#290635 = FILL_AREA_STYLE('',(#290636)); +#290636 = FILL_AREA_STYLE_COLOUR('',#270350); +#290637 = CURVE_STYLE('',#290638,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290638 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290639 = OVER_RIDING_STYLED_ITEM('overriding color',(#290640),#29133, + #290630); +#290640 = PRESENTATION_STYLE_ASSIGNMENT((#290641,#290646)); +#290641 = SURFACE_STYLE_USAGE(.BOTH.,#290642); +#290642 = SURFACE_SIDE_STYLE('',(#290643)); +#290643 = SURFACE_STYLE_FILL_AREA(#290644); +#290644 = FILL_AREA_STYLE('',(#290645)); +#290645 = FILL_AREA_STYLE_COLOUR('',#285989); +#290646 = CURVE_STYLE('',#290647,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290648 = OVER_RIDING_STYLED_ITEM('overriding color',(#290649),#29149, + #290630); +#290649 = PRESENTATION_STYLE_ASSIGNMENT((#290650,#290655)); +#290650 = SURFACE_STYLE_USAGE(.BOTH.,#290651); +#290651 = SURFACE_SIDE_STYLE('',(#290652)); +#290652 = SURFACE_STYLE_FILL_AREA(#290653); +#290653 = FILL_AREA_STYLE('',(#290654)); +#290654 = FILL_AREA_STYLE_COLOUR('',#285989); +#290655 = CURVE_STYLE('',#290656,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290656 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290657 = STYLED_ITEM('color',(#290658),#29168); +#290658 = PRESENTATION_STYLE_ASSIGNMENT((#290659,#290664)); +#290659 = SURFACE_STYLE_USAGE(.BOTH.,#290660); +#290660 = SURFACE_SIDE_STYLE('',(#290661)); +#290661 = SURFACE_STYLE_FILL_AREA(#290662); +#290662 = FILL_AREA_STYLE('',(#290663)); +#290663 = FILL_AREA_STYLE_COLOUR('',#270350); +#290664 = CURVE_STYLE('',#290665,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290665 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290666 = STYLED_ITEM('color',(#290667),#29199); +#290667 = PRESENTATION_STYLE_ASSIGNMENT((#290668,#290673)); +#290668 = SURFACE_STYLE_USAGE(.BOTH.,#290669); +#290669 = SURFACE_SIDE_STYLE('',(#290670)); +#290670 = SURFACE_STYLE_FILL_AREA(#290671); +#290671 = FILL_AREA_STYLE('',(#290672)); +#290672 = FILL_AREA_STYLE_COLOUR('',#270350); +#290673 = CURVE_STYLE('',#290674,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290674 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290675 = OVER_RIDING_STYLED_ITEM('overriding color',(#290676),#29213, + #290666); +#290676 = PRESENTATION_STYLE_ASSIGNMENT((#290677,#290682)); +#290677 = SURFACE_STYLE_USAGE(.BOTH.,#290678); +#290678 = SURFACE_SIDE_STYLE('',(#290679)); +#290679 = SURFACE_STYLE_FILL_AREA(#290680); +#290680 = FILL_AREA_STYLE('',(#290681)); +#290681 = FILL_AREA_STYLE_COLOUR('',#285989); +#290682 = CURVE_STYLE('',#290683,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290684 = OVER_RIDING_STYLED_ITEM('overriding color',(#290685),#29229, + #290666); +#290685 = PRESENTATION_STYLE_ASSIGNMENT((#290686,#290691)); +#290686 = SURFACE_STYLE_USAGE(.BOTH.,#290687); +#290687 = SURFACE_SIDE_STYLE('',(#290688)); +#290688 = SURFACE_STYLE_FILL_AREA(#290689); +#290689 = FILL_AREA_STYLE('',(#290690)); +#290690 = FILL_AREA_STYLE_COLOUR('',#285989); +#290691 = CURVE_STYLE('',#290692,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290692 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290693 = STYLED_ITEM('color',(#290694),#29255); +#290694 = PRESENTATION_STYLE_ASSIGNMENT((#290695,#290700)); +#290695 = SURFACE_STYLE_USAGE(.BOTH.,#290696); +#290696 = SURFACE_SIDE_STYLE('',(#290697)); +#290697 = SURFACE_STYLE_FILL_AREA(#290698); +#290698 = FILL_AREA_STYLE('',(#290699)); +#290699 = FILL_AREA_STYLE_COLOUR('',#270350); +#290700 = CURVE_STYLE('',#290701,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290701 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290702 = STYLED_ITEM('color',(#290703),#29279); +#290703 = PRESENTATION_STYLE_ASSIGNMENT((#290704,#290709)); +#290704 = SURFACE_STYLE_USAGE(.BOTH.,#290705); +#290705 = SURFACE_SIDE_STYLE('',(#290706)); +#290706 = SURFACE_STYLE_FILL_AREA(#290707); +#290707 = FILL_AREA_STYLE('',(#290708)); +#290708 = FILL_AREA_STYLE_COLOUR('',#270350); +#290709 = CURVE_STYLE('',#290710,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290710 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290711 = OVER_RIDING_STYLED_ITEM('overriding color',(#290712),#29293, + #290702); +#290712 = PRESENTATION_STYLE_ASSIGNMENT((#290713,#290718)); +#290713 = SURFACE_STYLE_USAGE(.BOTH.,#290714); +#290714 = SURFACE_SIDE_STYLE('',(#290715)); +#290715 = SURFACE_STYLE_FILL_AREA(#290716); +#290716 = FILL_AREA_STYLE('',(#290717)); +#290717 = FILL_AREA_STYLE_COLOUR('',#285989); +#290718 = CURVE_STYLE('',#290719,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290719 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290720 = OVER_RIDING_STYLED_ITEM('overriding color',(#290721),#29309, + #290702); +#290721 = PRESENTATION_STYLE_ASSIGNMENT((#290722,#290727)); +#290722 = SURFACE_STYLE_USAGE(.BOTH.,#290723); +#290723 = SURFACE_SIDE_STYLE('',(#290724)); +#290724 = SURFACE_STYLE_FILL_AREA(#290725); +#290725 = FILL_AREA_STYLE('',(#290726)); +#290726 = FILL_AREA_STYLE_COLOUR('',#285989); +#290727 = CURVE_STYLE('',#290728,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290728 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290729 = STYLED_ITEM('color',(#290730),#29328); +#290730 = PRESENTATION_STYLE_ASSIGNMENT((#290731,#290736)); +#290731 = SURFACE_STYLE_USAGE(.BOTH.,#290732); +#290732 = SURFACE_SIDE_STYLE('',(#290733)); +#290733 = SURFACE_STYLE_FILL_AREA(#290734); +#290734 = FILL_AREA_STYLE('',(#290735)); +#290735 = FILL_AREA_STYLE_COLOUR('',#270350); +#290736 = CURVE_STYLE('',#290737,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290737 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290738 = STYLED_ITEM('color',(#290739),#29359); +#290739 = PRESENTATION_STYLE_ASSIGNMENT((#290740,#290745)); +#290740 = SURFACE_STYLE_USAGE(.BOTH.,#290741); +#290741 = SURFACE_SIDE_STYLE('',(#290742)); +#290742 = SURFACE_STYLE_FILL_AREA(#290743); +#290743 = FILL_AREA_STYLE('',(#290744)); +#290744 = FILL_AREA_STYLE_COLOUR('',#270350); +#290745 = CURVE_STYLE('',#290746,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290746 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290747 = OVER_RIDING_STYLED_ITEM('overriding color',(#290748),#29373, + #290738); +#290748 = PRESENTATION_STYLE_ASSIGNMENT((#290749,#290754)); +#290749 = SURFACE_STYLE_USAGE(.BOTH.,#290750); +#290750 = SURFACE_SIDE_STYLE('',(#290751)); +#290751 = SURFACE_STYLE_FILL_AREA(#290752); +#290752 = FILL_AREA_STYLE('',(#290753)); +#290753 = FILL_AREA_STYLE_COLOUR('',#285989); +#290754 = CURVE_STYLE('',#290755,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290755 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290756 = OVER_RIDING_STYLED_ITEM('overriding color',(#290757),#29389, + #290738); +#290757 = PRESENTATION_STYLE_ASSIGNMENT((#290758,#290763)); +#290758 = SURFACE_STYLE_USAGE(.BOTH.,#290759); +#290759 = SURFACE_SIDE_STYLE('',(#290760)); +#290760 = SURFACE_STYLE_FILL_AREA(#290761); +#290761 = FILL_AREA_STYLE('',(#290762)); +#290762 = FILL_AREA_STYLE_COLOUR('',#285989); +#290763 = CURVE_STYLE('',#290764,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290764 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290765 = STYLED_ITEM('color',(#290766),#29415); +#290766 = PRESENTATION_STYLE_ASSIGNMENT((#290767,#290772)); +#290767 = SURFACE_STYLE_USAGE(.BOTH.,#290768); +#290768 = SURFACE_SIDE_STYLE('',(#290769)); +#290769 = SURFACE_STYLE_FILL_AREA(#290770); +#290770 = FILL_AREA_STYLE('',(#290771)); +#290771 = FILL_AREA_STYLE_COLOUR('',#270350); +#290772 = CURVE_STYLE('',#290773,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290774 = STYLED_ITEM('color',(#290775),#29439); +#290775 = PRESENTATION_STYLE_ASSIGNMENT((#290776,#290781)); +#290776 = SURFACE_STYLE_USAGE(.BOTH.,#290777); +#290777 = SURFACE_SIDE_STYLE('',(#290778)); +#290778 = SURFACE_STYLE_FILL_AREA(#290779); +#290779 = FILL_AREA_STYLE('',(#290780)); +#290780 = FILL_AREA_STYLE_COLOUR('',#270350); +#290781 = CURVE_STYLE('',#290782,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290782 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290783 = OVER_RIDING_STYLED_ITEM('overriding color',(#290784),#29453, + #290774); +#290784 = PRESENTATION_STYLE_ASSIGNMENT((#290785,#290790)); +#290785 = SURFACE_STYLE_USAGE(.BOTH.,#290786); +#290786 = SURFACE_SIDE_STYLE('',(#290787)); +#290787 = SURFACE_STYLE_FILL_AREA(#290788); +#290788 = FILL_AREA_STYLE('',(#290789)); +#290789 = FILL_AREA_STYLE_COLOUR('',#285989); +#290790 = CURVE_STYLE('',#290791,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290791 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290792 = OVER_RIDING_STYLED_ITEM('overriding color',(#290793),#29469, + #290774); +#290793 = PRESENTATION_STYLE_ASSIGNMENT((#290794,#290799)); +#290794 = SURFACE_STYLE_USAGE(.BOTH.,#290795); +#290795 = SURFACE_SIDE_STYLE('',(#290796)); +#290796 = SURFACE_STYLE_FILL_AREA(#290797); +#290797 = FILL_AREA_STYLE('',(#290798)); +#290798 = FILL_AREA_STYLE_COLOUR('',#285989); +#290799 = CURVE_STYLE('',#290800,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290800 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290801 = STYLED_ITEM('color',(#290802),#29488); +#290802 = PRESENTATION_STYLE_ASSIGNMENT((#290803,#290808)); +#290803 = SURFACE_STYLE_USAGE(.BOTH.,#290804); +#290804 = SURFACE_SIDE_STYLE('',(#290805)); +#290805 = SURFACE_STYLE_FILL_AREA(#290806); +#290806 = FILL_AREA_STYLE('',(#290807)); +#290807 = FILL_AREA_STYLE_COLOUR('',#270350); +#290808 = CURVE_STYLE('',#290809,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290809 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290810 = STYLED_ITEM('color',(#290811),#29519); +#290811 = PRESENTATION_STYLE_ASSIGNMENT((#290812,#290817)); +#290812 = SURFACE_STYLE_USAGE(.BOTH.,#290813); +#290813 = SURFACE_SIDE_STYLE('',(#290814)); +#290814 = SURFACE_STYLE_FILL_AREA(#290815); +#290815 = FILL_AREA_STYLE('',(#290816)); +#290816 = FILL_AREA_STYLE_COLOUR('',#270350); +#290817 = CURVE_STYLE('',#290818,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290818 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290819 = OVER_RIDING_STYLED_ITEM('overriding color',(#290820),#29533, + #290810); +#290820 = PRESENTATION_STYLE_ASSIGNMENT((#290821,#290826)); +#290821 = SURFACE_STYLE_USAGE(.BOTH.,#290822); +#290822 = SURFACE_SIDE_STYLE('',(#290823)); +#290823 = SURFACE_STYLE_FILL_AREA(#290824); +#290824 = FILL_AREA_STYLE('',(#290825)); +#290825 = FILL_AREA_STYLE_COLOUR('',#285989); +#290826 = CURVE_STYLE('',#290827,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290827 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290828 = OVER_RIDING_STYLED_ITEM('overriding color',(#290829),#29549, + #290810); +#290829 = PRESENTATION_STYLE_ASSIGNMENT((#290830,#290835)); +#290830 = SURFACE_STYLE_USAGE(.BOTH.,#290831); +#290831 = SURFACE_SIDE_STYLE('',(#290832)); +#290832 = SURFACE_STYLE_FILL_AREA(#290833); +#290833 = FILL_AREA_STYLE('',(#290834)); +#290834 = FILL_AREA_STYLE_COLOUR('',#285989); +#290835 = CURVE_STYLE('',#290836,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290836 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290837 = STYLED_ITEM('color',(#290838),#29575); +#290838 = PRESENTATION_STYLE_ASSIGNMENT((#290839,#290844)); +#290839 = SURFACE_STYLE_USAGE(.BOTH.,#290840); +#290840 = SURFACE_SIDE_STYLE('',(#290841)); +#290841 = SURFACE_STYLE_FILL_AREA(#290842); +#290842 = FILL_AREA_STYLE('',(#290843)); +#290843 = FILL_AREA_STYLE_COLOUR('',#270350); +#290844 = CURVE_STYLE('',#290845,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290845 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290846 = STYLED_ITEM('color',(#290847),#29599); +#290847 = PRESENTATION_STYLE_ASSIGNMENT((#290848,#290853)); +#290848 = SURFACE_STYLE_USAGE(.BOTH.,#290849); +#290849 = SURFACE_SIDE_STYLE('',(#290850)); +#290850 = SURFACE_STYLE_FILL_AREA(#290851); +#290851 = FILL_AREA_STYLE('',(#290852)); +#290852 = FILL_AREA_STYLE_COLOUR('',#270350); +#290853 = CURVE_STYLE('',#290854,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290854 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290855 = OVER_RIDING_STYLED_ITEM('overriding color',(#290856),#29613, + #290846); +#290856 = PRESENTATION_STYLE_ASSIGNMENT((#290857,#290862)); +#290857 = SURFACE_STYLE_USAGE(.BOTH.,#290858); +#290858 = SURFACE_SIDE_STYLE('',(#290859)); +#290859 = SURFACE_STYLE_FILL_AREA(#290860); +#290860 = FILL_AREA_STYLE('',(#290861)); +#290861 = FILL_AREA_STYLE_COLOUR('',#285989); +#290862 = CURVE_STYLE('',#290863,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290864 = OVER_RIDING_STYLED_ITEM('overriding color',(#290865),#29629, + #290846); +#290865 = PRESENTATION_STYLE_ASSIGNMENT((#290866,#290871)); +#290866 = SURFACE_STYLE_USAGE(.BOTH.,#290867); +#290867 = SURFACE_SIDE_STYLE('',(#290868)); +#290868 = SURFACE_STYLE_FILL_AREA(#290869); +#290869 = FILL_AREA_STYLE('',(#290870)); +#290870 = FILL_AREA_STYLE_COLOUR('',#285989); +#290871 = CURVE_STYLE('',#290872,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290872 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290873 = STYLED_ITEM('color',(#290874),#29648); +#290874 = PRESENTATION_STYLE_ASSIGNMENT((#290875,#290880)); +#290875 = SURFACE_STYLE_USAGE(.BOTH.,#290876); +#290876 = SURFACE_SIDE_STYLE('',(#290877)); +#290877 = SURFACE_STYLE_FILL_AREA(#290878); +#290878 = FILL_AREA_STYLE('',(#290879)); +#290879 = FILL_AREA_STYLE_COLOUR('',#270350); +#290880 = CURVE_STYLE('',#290881,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290881 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290882 = STYLED_ITEM('color',(#290883),#29679); +#290883 = PRESENTATION_STYLE_ASSIGNMENT((#290884,#290889)); +#290884 = SURFACE_STYLE_USAGE(.BOTH.,#290885); +#290885 = SURFACE_SIDE_STYLE('',(#290886)); +#290886 = SURFACE_STYLE_FILL_AREA(#290887); +#290887 = FILL_AREA_STYLE('',(#290888)); +#290888 = FILL_AREA_STYLE_COLOUR('',#270350); +#290889 = CURVE_STYLE('',#290890,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290891 = OVER_RIDING_STYLED_ITEM('overriding color',(#290892),#29693, + #290882); +#290892 = PRESENTATION_STYLE_ASSIGNMENT((#290893,#290898)); +#290893 = SURFACE_STYLE_USAGE(.BOTH.,#290894); +#290894 = SURFACE_SIDE_STYLE('',(#290895)); +#290895 = SURFACE_STYLE_FILL_AREA(#290896); +#290896 = FILL_AREA_STYLE('',(#290897)); +#290897 = FILL_AREA_STYLE_COLOUR('',#285989); +#290898 = CURVE_STYLE('',#290899,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290899 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290900 = OVER_RIDING_STYLED_ITEM('overriding color',(#290901),#29709, + #290882); +#290901 = PRESENTATION_STYLE_ASSIGNMENT((#290902,#290907)); +#290902 = SURFACE_STYLE_USAGE(.BOTH.,#290903); +#290903 = SURFACE_SIDE_STYLE('',(#290904)); +#290904 = SURFACE_STYLE_FILL_AREA(#290905); +#290905 = FILL_AREA_STYLE('',(#290906)); +#290906 = FILL_AREA_STYLE_COLOUR('',#285989); +#290907 = CURVE_STYLE('',#290908,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290908 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290909 = STYLED_ITEM('color',(#290910),#29735); +#290910 = PRESENTATION_STYLE_ASSIGNMENT((#290911,#290916)); +#290911 = SURFACE_STYLE_USAGE(.BOTH.,#290912); +#290912 = SURFACE_SIDE_STYLE('',(#290913)); +#290913 = SURFACE_STYLE_FILL_AREA(#290914); +#290914 = FILL_AREA_STYLE('',(#290915)); +#290915 = FILL_AREA_STYLE_COLOUR('',#270350); +#290916 = CURVE_STYLE('',#290917,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290917 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290918 = STYLED_ITEM('color',(#290919),#29759); +#290919 = PRESENTATION_STYLE_ASSIGNMENT((#290920,#290925)); +#290920 = SURFACE_STYLE_USAGE(.BOTH.,#290921); +#290921 = SURFACE_SIDE_STYLE('',(#290922)); +#290922 = SURFACE_STYLE_FILL_AREA(#290923); +#290923 = FILL_AREA_STYLE('',(#290924)); +#290924 = FILL_AREA_STYLE_COLOUR('',#270350); +#290925 = CURVE_STYLE('',#290926,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290926 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290927 = OVER_RIDING_STYLED_ITEM('overriding color',(#290928),#29773, + #290918); +#290928 = PRESENTATION_STYLE_ASSIGNMENT((#290929,#290934)); +#290929 = SURFACE_STYLE_USAGE(.BOTH.,#290930); +#290930 = SURFACE_SIDE_STYLE('',(#290931)); +#290931 = SURFACE_STYLE_FILL_AREA(#290932); +#290932 = FILL_AREA_STYLE('',(#290933)); +#290933 = FILL_AREA_STYLE_COLOUR('',#285989); +#290934 = CURVE_STYLE('',#290935,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290935 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290936 = OVER_RIDING_STYLED_ITEM('overriding color',(#290937),#29789, + #290918); +#290937 = PRESENTATION_STYLE_ASSIGNMENT((#290938,#290943)); +#290938 = SURFACE_STYLE_USAGE(.BOTH.,#290939); +#290939 = SURFACE_SIDE_STYLE('',(#290940)); +#290940 = SURFACE_STYLE_FILL_AREA(#290941); +#290941 = FILL_AREA_STYLE('',(#290942)); +#290942 = FILL_AREA_STYLE_COLOUR('',#285989); +#290943 = CURVE_STYLE('',#290944,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290944 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290945 = STYLED_ITEM('color',(#290946),#29808); +#290946 = PRESENTATION_STYLE_ASSIGNMENT((#290947,#290952)); +#290947 = SURFACE_STYLE_USAGE(.BOTH.,#290948); +#290948 = SURFACE_SIDE_STYLE('',(#290949)); +#290949 = SURFACE_STYLE_FILL_AREA(#290950); +#290950 = FILL_AREA_STYLE('',(#290951)); +#290951 = FILL_AREA_STYLE_COLOUR('',#270350); +#290952 = CURVE_STYLE('',#290953,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290953 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290954 = STYLED_ITEM('color',(#290955),#29839); +#290955 = PRESENTATION_STYLE_ASSIGNMENT((#290956,#290961)); +#290956 = SURFACE_STYLE_USAGE(.BOTH.,#290957); +#290957 = SURFACE_SIDE_STYLE('',(#290958)); +#290958 = SURFACE_STYLE_FILL_AREA(#290959); +#290959 = FILL_AREA_STYLE('',(#290960)); +#290960 = FILL_AREA_STYLE_COLOUR('',#270350); +#290961 = CURVE_STYLE('',#290962,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290962 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290963 = OVER_RIDING_STYLED_ITEM('overriding color',(#290964),#29853, + #290954); +#290964 = PRESENTATION_STYLE_ASSIGNMENT((#290965,#290970)); +#290965 = SURFACE_STYLE_USAGE(.BOTH.,#290966); +#290966 = SURFACE_SIDE_STYLE('',(#290967)); +#290967 = SURFACE_STYLE_FILL_AREA(#290968); +#290968 = FILL_AREA_STYLE('',(#290969)); +#290969 = FILL_AREA_STYLE_COLOUR('',#285989); +#290970 = CURVE_STYLE('',#290971,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290971 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290972 = OVER_RIDING_STYLED_ITEM('overriding color',(#290973),#29869, + #290954); +#290973 = PRESENTATION_STYLE_ASSIGNMENT((#290974,#290979)); +#290974 = SURFACE_STYLE_USAGE(.BOTH.,#290975); +#290975 = SURFACE_SIDE_STYLE('',(#290976)); +#290976 = SURFACE_STYLE_FILL_AREA(#290977); +#290977 = FILL_AREA_STYLE('',(#290978)); +#290978 = FILL_AREA_STYLE_COLOUR('',#285989); +#290979 = CURVE_STYLE('',#290980,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#290980 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290981 = STYLED_ITEM('color',(#290982),#29895); +#290982 = PRESENTATION_STYLE_ASSIGNMENT((#290983,#290988)); +#290983 = SURFACE_STYLE_USAGE(.BOTH.,#290984); +#290984 = SURFACE_SIDE_STYLE('',(#290985)); +#290985 = SURFACE_STYLE_FILL_AREA(#290986); +#290986 = FILL_AREA_STYLE('',(#290987)); +#290987 = FILL_AREA_STYLE_COLOUR('',#270350); +#290988 = CURVE_STYLE('',#290989,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290989 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290990 = STYLED_ITEM('color',(#290991),#29919); +#290991 = PRESENTATION_STYLE_ASSIGNMENT((#290992,#290997)); +#290992 = SURFACE_STYLE_USAGE(.BOTH.,#290993); +#290993 = SURFACE_SIDE_STYLE('',(#290994)); +#290994 = SURFACE_STYLE_FILL_AREA(#290995); +#290995 = FILL_AREA_STYLE('',(#290996)); +#290996 = FILL_AREA_STYLE_COLOUR('',#270350); +#290997 = CURVE_STYLE('',#290998,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#290998 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#290999 = OVER_RIDING_STYLED_ITEM('overriding color',(#291000),#29933, + #290990); +#291000 = PRESENTATION_STYLE_ASSIGNMENT((#291001,#291006)); +#291001 = SURFACE_STYLE_USAGE(.BOTH.,#291002); +#291002 = SURFACE_SIDE_STYLE('',(#291003)); +#291003 = SURFACE_STYLE_FILL_AREA(#291004); +#291004 = FILL_AREA_STYLE('',(#291005)); +#291005 = FILL_AREA_STYLE_COLOUR('',#285989); +#291006 = CURVE_STYLE('',#291007,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291007 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291008 = OVER_RIDING_STYLED_ITEM('overriding color',(#291009),#29949, + #290990); +#291009 = PRESENTATION_STYLE_ASSIGNMENT((#291010,#291015)); +#291010 = SURFACE_STYLE_USAGE(.BOTH.,#291011); +#291011 = SURFACE_SIDE_STYLE('',(#291012)); +#291012 = SURFACE_STYLE_FILL_AREA(#291013); +#291013 = FILL_AREA_STYLE('',(#291014)); +#291014 = FILL_AREA_STYLE_COLOUR('',#285989); +#291015 = CURVE_STYLE('',#291016,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291016 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291017 = STYLED_ITEM('color',(#291018),#29968); +#291018 = PRESENTATION_STYLE_ASSIGNMENT((#291019,#291024)); +#291019 = SURFACE_STYLE_USAGE(.BOTH.,#291020); +#291020 = SURFACE_SIDE_STYLE('',(#291021)); +#291021 = SURFACE_STYLE_FILL_AREA(#291022); +#291022 = FILL_AREA_STYLE('',(#291023)); +#291023 = FILL_AREA_STYLE_COLOUR('',#270350); +#291024 = CURVE_STYLE('',#291025,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291025 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291026 = STYLED_ITEM('color',(#291027),#29999); +#291027 = PRESENTATION_STYLE_ASSIGNMENT((#291028,#291033)); +#291028 = SURFACE_STYLE_USAGE(.BOTH.,#291029); +#291029 = SURFACE_SIDE_STYLE('',(#291030)); +#291030 = SURFACE_STYLE_FILL_AREA(#291031); +#291031 = FILL_AREA_STYLE('',(#291032)); +#291032 = FILL_AREA_STYLE_COLOUR('',#270350); +#291033 = CURVE_STYLE('',#291034,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291034 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291035 = OVER_RIDING_STYLED_ITEM('overriding color',(#291036),#30013, + #291026); +#291036 = PRESENTATION_STYLE_ASSIGNMENT((#291037,#291042)); +#291037 = SURFACE_STYLE_USAGE(.BOTH.,#291038); +#291038 = SURFACE_SIDE_STYLE('',(#291039)); +#291039 = SURFACE_STYLE_FILL_AREA(#291040); +#291040 = FILL_AREA_STYLE('',(#291041)); +#291041 = FILL_AREA_STYLE_COLOUR('',#285989); +#291042 = CURVE_STYLE('',#291043,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291043 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291044 = OVER_RIDING_STYLED_ITEM('overriding color',(#291045),#30029, + #291026); +#291045 = PRESENTATION_STYLE_ASSIGNMENT((#291046,#291051)); +#291046 = SURFACE_STYLE_USAGE(.BOTH.,#291047); +#291047 = SURFACE_SIDE_STYLE('',(#291048)); +#291048 = SURFACE_STYLE_FILL_AREA(#291049); +#291049 = FILL_AREA_STYLE('',(#291050)); +#291050 = FILL_AREA_STYLE_COLOUR('',#285989); +#291051 = CURVE_STYLE('',#291052,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291052 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291053 = STYLED_ITEM('color',(#291054),#30055); +#291054 = PRESENTATION_STYLE_ASSIGNMENT((#291055,#291060)); +#291055 = SURFACE_STYLE_USAGE(.BOTH.,#291056); +#291056 = SURFACE_SIDE_STYLE('',(#291057)); +#291057 = SURFACE_STYLE_FILL_AREA(#291058); +#291058 = FILL_AREA_STYLE('',(#291059)); +#291059 = FILL_AREA_STYLE_COLOUR('',#270350); +#291060 = CURVE_STYLE('',#291061,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291061 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291062 = STYLED_ITEM('color',(#291063),#30079); +#291063 = PRESENTATION_STYLE_ASSIGNMENT((#291064,#291069)); +#291064 = SURFACE_STYLE_USAGE(.BOTH.,#291065); +#291065 = SURFACE_SIDE_STYLE('',(#291066)); +#291066 = SURFACE_STYLE_FILL_AREA(#291067); +#291067 = FILL_AREA_STYLE('',(#291068)); +#291068 = FILL_AREA_STYLE_COLOUR('',#270350); +#291069 = CURVE_STYLE('',#291070,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291071 = OVER_RIDING_STYLED_ITEM('overriding color',(#291072),#30093, + #291062); +#291072 = PRESENTATION_STYLE_ASSIGNMENT((#291073,#291078)); +#291073 = SURFACE_STYLE_USAGE(.BOTH.,#291074); +#291074 = SURFACE_SIDE_STYLE('',(#291075)); +#291075 = SURFACE_STYLE_FILL_AREA(#291076); +#291076 = FILL_AREA_STYLE('',(#291077)); +#291077 = FILL_AREA_STYLE_COLOUR('',#285989); +#291078 = CURVE_STYLE('',#291079,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291079 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291080 = OVER_RIDING_STYLED_ITEM('overriding color',(#291081),#30109, + #291062); +#291081 = PRESENTATION_STYLE_ASSIGNMENT((#291082,#291087)); +#291082 = SURFACE_STYLE_USAGE(.BOTH.,#291083); +#291083 = SURFACE_SIDE_STYLE('',(#291084)); +#291084 = SURFACE_STYLE_FILL_AREA(#291085); +#291085 = FILL_AREA_STYLE('',(#291086)); +#291086 = FILL_AREA_STYLE_COLOUR('',#285989); +#291087 = CURVE_STYLE('',#291088,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291089 = STYLED_ITEM('color',(#291090),#30128); +#291090 = PRESENTATION_STYLE_ASSIGNMENT((#291091,#291096)); +#291091 = SURFACE_STYLE_USAGE(.BOTH.,#291092); +#291092 = SURFACE_SIDE_STYLE('',(#291093)); +#291093 = SURFACE_STYLE_FILL_AREA(#291094); +#291094 = FILL_AREA_STYLE('',(#291095)); +#291095 = FILL_AREA_STYLE_COLOUR('',#270350); +#291096 = CURVE_STYLE('',#291097,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291098 = STYLED_ITEM('color',(#291099),#30159); +#291099 = PRESENTATION_STYLE_ASSIGNMENT((#291100,#291105)); +#291100 = SURFACE_STYLE_USAGE(.BOTH.,#291101); +#291101 = SURFACE_SIDE_STYLE('',(#291102)); +#291102 = SURFACE_STYLE_FILL_AREA(#291103); +#291103 = FILL_AREA_STYLE('',(#291104)); +#291104 = FILL_AREA_STYLE_COLOUR('',#270350); +#291105 = CURVE_STYLE('',#291106,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291107 = OVER_RIDING_STYLED_ITEM('overriding color',(#291108),#30173, + #291098); +#291108 = PRESENTATION_STYLE_ASSIGNMENT((#291109,#291114)); +#291109 = SURFACE_STYLE_USAGE(.BOTH.,#291110); +#291110 = SURFACE_SIDE_STYLE('',(#291111)); +#291111 = SURFACE_STYLE_FILL_AREA(#291112); +#291112 = FILL_AREA_STYLE('',(#291113)); +#291113 = FILL_AREA_STYLE_COLOUR('',#285989); +#291114 = CURVE_STYLE('',#291115,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291116 = OVER_RIDING_STYLED_ITEM('overriding color',(#291117),#30189, + #291098); +#291117 = PRESENTATION_STYLE_ASSIGNMENT((#291118,#291123)); +#291118 = SURFACE_STYLE_USAGE(.BOTH.,#291119); +#291119 = SURFACE_SIDE_STYLE('',(#291120)); +#291120 = SURFACE_STYLE_FILL_AREA(#291121); +#291121 = FILL_AREA_STYLE('',(#291122)); +#291122 = FILL_AREA_STYLE_COLOUR('',#285989); +#291123 = CURVE_STYLE('',#291124,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291125 = STYLED_ITEM('color',(#291126),#30215); +#291126 = PRESENTATION_STYLE_ASSIGNMENT((#291127,#291132)); +#291127 = SURFACE_STYLE_USAGE(.BOTH.,#291128); +#291128 = SURFACE_SIDE_STYLE('',(#291129)); +#291129 = SURFACE_STYLE_FILL_AREA(#291130); +#291130 = FILL_AREA_STYLE('',(#291131)); +#291131 = FILL_AREA_STYLE_COLOUR('',#270350); +#291132 = CURVE_STYLE('',#291133,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291134 = STYLED_ITEM('color',(#291135),#30239); +#291135 = PRESENTATION_STYLE_ASSIGNMENT((#291136,#291141)); +#291136 = SURFACE_STYLE_USAGE(.BOTH.,#291137); +#291137 = SURFACE_SIDE_STYLE('',(#291138)); +#291138 = SURFACE_STYLE_FILL_AREA(#291139); +#291139 = FILL_AREA_STYLE('',(#291140)); +#291140 = FILL_AREA_STYLE_COLOUR('',#270350); +#291141 = CURVE_STYLE('',#291142,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#291142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291143 = OVER_RIDING_STYLED_ITEM('overriding color',(#291144),#30253, + #291134); +#291144 = PRESENTATION_STYLE_ASSIGNMENT((#291145,#291150)); +#291145 = SURFACE_STYLE_USAGE(.BOTH.,#291146); +#291146 = SURFACE_SIDE_STYLE('',(#291147)); +#291147 = SURFACE_STYLE_FILL_AREA(#291148); +#291148 = FILL_AREA_STYLE('',(#291149)); +#291149 = FILL_AREA_STYLE_COLOUR('',#285989); +#291150 = CURVE_STYLE('',#291151,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291152 = OVER_RIDING_STYLED_ITEM('overriding color',(#291153),#30269, + #291134); +#291153 = PRESENTATION_STYLE_ASSIGNMENT((#291154,#291159)); +#291154 = SURFACE_STYLE_USAGE(.BOTH.,#291155); +#291155 = SURFACE_SIDE_STYLE('',(#291156)); +#291156 = SURFACE_STYLE_FILL_AREA(#291157); +#291157 = FILL_AREA_STYLE('',(#291158)); +#291158 = FILL_AREA_STYLE_COLOUR('',#285989); +#291159 = CURVE_STYLE('',#291160,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291161 = STYLED_ITEM('color',(#291162),#30288); +#291162 = PRESENTATION_STYLE_ASSIGNMENT((#291163,#291168)); +#291163 = SURFACE_STYLE_USAGE(.BOTH.,#291164); +#291164 = SURFACE_SIDE_STYLE('',(#291165)); +#291165 = SURFACE_STYLE_FILL_AREA(#291166); +#291166 = FILL_AREA_STYLE('',(#291167)); +#291167 = FILL_AREA_STYLE_COLOUR('',#285989); +#291168 = CURVE_STYLE('',#291169,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291170 = STYLED_ITEM('color',(#291171),#30305); +#291171 = PRESENTATION_STYLE_ASSIGNMENT((#291172,#291177)); +#291172 = SURFACE_STYLE_USAGE(.BOTH.,#291173); +#291173 = SURFACE_SIDE_STYLE('',(#291174)); +#291174 = SURFACE_STYLE_FILL_AREA(#291175); +#291175 = FILL_AREA_STYLE('',(#291176)); +#291176 = FILL_AREA_STYLE_COLOUR('',#285989); +#291177 = CURVE_STYLE('',#291178,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291179 = STYLED_ITEM('color',(#291180),#30322); +#291180 = PRESENTATION_STYLE_ASSIGNMENT((#291181,#291186)); +#291181 = SURFACE_STYLE_USAGE(.BOTH.,#291182); +#291182 = SURFACE_SIDE_STYLE('',(#291183)); +#291183 = SURFACE_STYLE_FILL_AREA(#291184); +#291184 = FILL_AREA_STYLE('',(#291185)); +#291185 = FILL_AREA_STYLE_COLOUR('',#285989); +#291186 = CURVE_STYLE('',#291187,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291188 = STYLED_ITEM('color',(#291189),#30339); +#291189 = PRESENTATION_STYLE_ASSIGNMENT((#291190,#291195)); +#291190 = SURFACE_STYLE_USAGE(.BOTH.,#291191); +#291191 = SURFACE_SIDE_STYLE('',(#291192)); +#291192 = SURFACE_STYLE_FILL_AREA(#291193); +#291193 = FILL_AREA_STYLE('',(#291194)); +#291194 = FILL_AREA_STYLE_COLOUR('',#285989); +#291195 = CURVE_STYLE('',#291196,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291197 = STYLED_ITEM('color',(#291198),#30356); +#291198 = PRESENTATION_STYLE_ASSIGNMENT((#291199,#291204)); +#291199 = SURFACE_STYLE_USAGE(.BOTH.,#291200); +#291200 = SURFACE_SIDE_STYLE('',(#291201)); +#291201 = SURFACE_STYLE_FILL_AREA(#291202); +#291202 = FILL_AREA_STYLE('',(#291203)); +#291203 = FILL_AREA_STYLE_COLOUR('',#285989); +#291204 = CURVE_STYLE('',#291205,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291206 = STYLED_ITEM('color',(#291207),#30368); +#291207 = PRESENTATION_STYLE_ASSIGNMENT((#291208,#291213)); +#291208 = SURFACE_STYLE_USAGE(.BOTH.,#291209); +#291209 = SURFACE_SIDE_STYLE('',(#291210)); +#291210 = SURFACE_STYLE_FILL_AREA(#291211); +#291211 = FILL_AREA_STYLE('',(#291212)); +#291212 = FILL_AREA_STYLE_COLOUR('',#285989); +#291213 = CURVE_STYLE('',#291214,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291215 = STYLED_ITEM('color',(#291216),#30385); +#291216 = PRESENTATION_STYLE_ASSIGNMENT((#291217,#291222)); +#291217 = SURFACE_STYLE_USAGE(.BOTH.,#291218); +#291218 = SURFACE_SIDE_STYLE('',(#291219)); +#291219 = SURFACE_STYLE_FILL_AREA(#291220); +#291220 = FILL_AREA_STYLE('',(#291221)); +#291221 = FILL_AREA_STYLE_COLOUR('',#285989); +#291222 = CURVE_STYLE('',#291223,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291224 = STYLED_ITEM('color',(#291225),#30402); +#291225 = PRESENTATION_STYLE_ASSIGNMENT((#291226,#291231)); +#291226 = SURFACE_STYLE_USAGE(.BOTH.,#291227); +#291227 = SURFACE_SIDE_STYLE('',(#291228)); +#291228 = SURFACE_STYLE_FILL_AREA(#291229); +#291229 = FILL_AREA_STYLE('',(#291230)); +#291230 = FILL_AREA_STYLE_COLOUR('',#285989); +#291231 = CURVE_STYLE('',#291232,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291233 = STYLED_ITEM('color',(#291234),#30419); +#291234 = PRESENTATION_STYLE_ASSIGNMENT((#291235,#291240)); +#291235 = SURFACE_STYLE_USAGE(.BOTH.,#291236); +#291236 = SURFACE_SIDE_STYLE('',(#291237)); +#291237 = SURFACE_STYLE_FILL_AREA(#291238); +#291238 = FILL_AREA_STYLE('',(#291239)); +#291239 = FILL_AREA_STYLE_COLOUR('',#285989); +#291240 = CURVE_STYLE('',#291241,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291242 = STYLED_ITEM('color',(#291243),#30436); +#291243 = PRESENTATION_STYLE_ASSIGNMENT((#291244,#291249)); +#291244 = SURFACE_STYLE_USAGE(.BOTH.,#291245); +#291245 = SURFACE_SIDE_STYLE('',(#291246)); +#291246 = SURFACE_STYLE_FILL_AREA(#291247); +#291247 = FILL_AREA_STYLE('',(#291248)); +#291248 = FILL_AREA_STYLE_COLOUR('',#285989); +#291249 = CURVE_STYLE('',#291250,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291251 = STYLED_ITEM('color',(#291252),#30448); +#291252 = PRESENTATION_STYLE_ASSIGNMENT((#291253,#291258)); +#291253 = SURFACE_STYLE_USAGE(.BOTH.,#291254); +#291254 = SURFACE_SIDE_STYLE('',(#291255)); +#291255 = SURFACE_STYLE_FILL_AREA(#291256); +#291256 = FILL_AREA_STYLE('',(#291257)); +#291257 = FILL_AREA_STYLE_COLOUR('',#285989); +#291258 = CURVE_STYLE('',#291259,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291260 = STYLED_ITEM('color',(#291261),#30465); +#291261 = PRESENTATION_STYLE_ASSIGNMENT((#291262,#291267)); +#291262 = SURFACE_STYLE_USAGE(.BOTH.,#291263); +#291263 = SURFACE_SIDE_STYLE('',(#291264)); +#291264 = SURFACE_STYLE_FILL_AREA(#291265); +#291265 = FILL_AREA_STYLE('',(#291266)); +#291266 = FILL_AREA_STYLE_COLOUR('',#285989); +#291267 = CURVE_STYLE('',#291268,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291269 = STYLED_ITEM('color',(#291270),#30482); +#291270 = PRESENTATION_STYLE_ASSIGNMENT((#291271,#291276)); +#291271 = SURFACE_STYLE_USAGE(.BOTH.,#291272); +#291272 = SURFACE_SIDE_STYLE('',(#291273)); +#291273 = SURFACE_STYLE_FILL_AREA(#291274); +#291274 = FILL_AREA_STYLE('',(#291275)); +#291275 = FILL_AREA_STYLE_COLOUR('',#285989); +#291276 = CURVE_STYLE('',#291277,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291278 = STYLED_ITEM('color',(#291279),#30499); +#291279 = PRESENTATION_STYLE_ASSIGNMENT((#291280,#291285)); +#291280 = SURFACE_STYLE_USAGE(.BOTH.,#291281); +#291281 = SURFACE_SIDE_STYLE('',(#291282)); +#291282 = SURFACE_STYLE_FILL_AREA(#291283); +#291283 = FILL_AREA_STYLE('',(#291284)); +#291284 = FILL_AREA_STYLE_COLOUR('',#285989); +#291285 = CURVE_STYLE('',#291286,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291287 = STYLED_ITEM('color',(#291288),#30516); +#291288 = PRESENTATION_STYLE_ASSIGNMENT((#291289,#291294)); +#291289 = SURFACE_STYLE_USAGE(.BOTH.,#291290); +#291290 = SURFACE_SIDE_STYLE('',(#291291)); +#291291 = SURFACE_STYLE_FILL_AREA(#291292); +#291292 = FILL_AREA_STYLE('',(#291293)); +#291293 = FILL_AREA_STYLE_COLOUR('',#285989); +#291294 = CURVE_STYLE('',#291295,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291296 = STYLED_ITEM('color',(#291297),#30528); +#291297 = PRESENTATION_STYLE_ASSIGNMENT((#291298,#291303)); +#291298 = SURFACE_STYLE_USAGE(.BOTH.,#291299); +#291299 = SURFACE_SIDE_STYLE('',(#291300)); +#291300 = SURFACE_STYLE_FILL_AREA(#291301); +#291301 = FILL_AREA_STYLE('',(#291302)); +#291302 = FILL_AREA_STYLE_COLOUR('',#285989); +#291303 = CURVE_STYLE('',#291304,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291305 = STYLED_ITEM('color',(#291306),#30545); +#291306 = PRESENTATION_STYLE_ASSIGNMENT((#291307,#291312)); +#291307 = SURFACE_STYLE_USAGE(.BOTH.,#291308); +#291308 = SURFACE_SIDE_STYLE('',(#291309)); +#291309 = SURFACE_STYLE_FILL_AREA(#291310); +#291310 = FILL_AREA_STYLE('',(#291311)); +#291311 = FILL_AREA_STYLE_COLOUR('',#285989); +#291312 = CURVE_STYLE('',#291313,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291314 = STYLED_ITEM('color',(#291315),#30562); +#291315 = PRESENTATION_STYLE_ASSIGNMENT((#291316,#291321)); +#291316 = SURFACE_STYLE_USAGE(.BOTH.,#291317); +#291317 = SURFACE_SIDE_STYLE('',(#291318)); +#291318 = SURFACE_STYLE_FILL_AREA(#291319); +#291319 = FILL_AREA_STYLE('',(#291320)); +#291320 = FILL_AREA_STYLE_COLOUR('',#285989); +#291321 = CURVE_STYLE('',#291322,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291323 = STYLED_ITEM('color',(#291324),#30579); +#291324 = PRESENTATION_STYLE_ASSIGNMENT((#291325,#291330)); +#291325 = SURFACE_STYLE_USAGE(.BOTH.,#291326); +#291326 = SURFACE_SIDE_STYLE('',(#291327)); +#291327 = SURFACE_STYLE_FILL_AREA(#291328); +#291328 = FILL_AREA_STYLE('',(#291329)); +#291329 = FILL_AREA_STYLE_COLOUR('',#285989); +#291330 = CURVE_STYLE('',#291331,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291332 = STYLED_ITEM('color',(#291333),#30596); +#291333 = PRESENTATION_STYLE_ASSIGNMENT((#291334,#291339)); +#291334 = SURFACE_STYLE_USAGE(.BOTH.,#291335); +#291335 = SURFACE_SIDE_STYLE('',(#291336)); +#291336 = SURFACE_STYLE_FILL_AREA(#291337); +#291337 = FILL_AREA_STYLE('',(#291338)); +#291338 = FILL_AREA_STYLE_COLOUR('',#285989); +#291339 = CURVE_STYLE('',#291340,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291341 = STYLED_ITEM('color',(#291342),#30608); +#291342 = PRESENTATION_STYLE_ASSIGNMENT((#291343,#291348)); +#291343 = SURFACE_STYLE_USAGE(.BOTH.,#291344); +#291344 = SURFACE_SIDE_STYLE('',(#291345)); +#291345 = SURFACE_STYLE_FILL_AREA(#291346); +#291346 = FILL_AREA_STYLE('',(#291347)); +#291347 = FILL_AREA_STYLE_COLOUR('',#285989); +#291348 = CURVE_STYLE('',#291349,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291350 = STYLED_ITEM('color',(#291351),#30625); +#291351 = PRESENTATION_STYLE_ASSIGNMENT((#291352,#291357)); +#291352 = SURFACE_STYLE_USAGE(.BOTH.,#291353); +#291353 = SURFACE_SIDE_STYLE('',(#291354)); +#291354 = SURFACE_STYLE_FILL_AREA(#291355); +#291355 = FILL_AREA_STYLE('',(#291356)); +#291356 = FILL_AREA_STYLE_COLOUR('',#285989); +#291357 = CURVE_STYLE('',#291358,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291359 = STYLED_ITEM('color',(#291360),#30642); +#291360 = PRESENTATION_STYLE_ASSIGNMENT((#291361,#291366)); +#291361 = SURFACE_STYLE_USAGE(.BOTH.,#291362); +#291362 = SURFACE_SIDE_STYLE('',(#291363)); +#291363 = SURFACE_STYLE_FILL_AREA(#291364); +#291364 = FILL_AREA_STYLE('',(#291365)); +#291365 = FILL_AREA_STYLE_COLOUR('',#285989); +#291366 = CURVE_STYLE('',#291367,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291368 = STYLED_ITEM('color',(#291369),#30659); +#291369 = PRESENTATION_STYLE_ASSIGNMENT((#291370,#291375)); +#291370 = SURFACE_STYLE_USAGE(.BOTH.,#291371); +#291371 = SURFACE_SIDE_STYLE('',(#291372)); +#291372 = SURFACE_STYLE_FILL_AREA(#291373); +#291373 = FILL_AREA_STYLE('',(#291374)); +#291374 = FILL_AREA_STYLE_COLOUR('',#285989); +#291375 = CURVE_STYLE('',#291376,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291377 = STYLED_ITEM('color',(#291378),#30676); +#291378 = PRESENTATION_STYLE_ASSIGNMENT((#291379,#291384)); +#291379 = SURFACE_STYLE_USAGE(.BOTH.,#291380); +#291380 = SURFACE_SIDE_STYLE('',(#291381)); +#291381 = SURFACE_STYLE_FILL_AREA(#291382); +#291382 = FILL_AREA_STYLE('',(#291383)); +#291383 = FILL_AREA_STYLE_COLOUR('',#285989); +#291384 = CURVE_STYLE('',#291385,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291386 = STYLED_ITEM('color',(#291387),#30688); +#291387 = PRESENTATION_STYLE_ASSIGNMENT((#291388,#291393)); +#291388 = SURFACE_STYLE_USAGE(.BOTH.,#291389); +#291389 = SURFACE_SIDE_STYLE('',(#291390)); +#291390 = SURFACE_STYLE_FILL_AREA(#291391); +#291391 = FILL_AREA_STYLE('',(#291392)); +#291392 = FILL_AREA_STYLE_COLOUR('',#285989); +#291393 = CURVE_STYLE('',#291394,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291395 = STYLED_ITEM('color',(#291396),#30705); +#291396 = PRESENTATION_STYLE_ASSIGNMENT((#291397,#291402)); +#291397 = SURFACE_STYLE_USAGE(.BOTH.,#291398); +#291398 = SURFACE_SIDE_STYLE('',(#291399)); +#291399 = SURFACE_STYLE_FILL_AREA(#291400); +#291400 = FILL_AREA_STYLE('',(#291401)); +#291401 = FILL_AREA_STYLE_COLOUR('',#285989); +#291402 = CURVE_STYLE('',#291403,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291404 = STYLED_ITEM('color',(#291405),#30722); +#291405 = PRESENTATION_STYLE_ASSIGNMENT((#291406,#291411)); +#291406 = SURFACE_STYLE_USAGE(.BOTH.,#291407); +#291407 = SURFACE_SIDE_STYLE('',(#291408)); +#291408 = SURFACE_STYLE_FILL_AREA(#291409); +#291409 = FILL_AREA_STYLE('',(#291410)); +#291410 = FILL_AREA_STYLE_COLOUR('',#285989); +#291411 = CURVE_STYLE('',#291412,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291413 = STYLED_ITEM('color',(#291414),#30739); +#291414 = PRESENTATION_STYLE_ASSIGNMENT((#291415,#291420)); +#291415 = SURFACE_STYLE_USAGE(.BOTH.,#291416); +#291416 = SURFACE_SIDE_STYLE('',(#291417)); +#291417 = SURFACE_STYLE_FILL_AREA(#291418); +#291418 = FILL_AREA_STYLE('',(#291419)); +#291419 = FILL_AREA_STYLE_COLOUR('',#285989); +#291420 = CURVE_STYLE('',#291421,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291422 = STYLED_ITEM('color',(#291423),#30756); +#291423 = PRESENTATION_STYLE_ASSIGNMENT((#291424,#291429)); +#291424 = SURFACE_STYLE_USAGE(.BOTH.,#291425); +#291425 = SURFACE_SIDE_STYLE('',(#291426)); +#291426 = SURFACE_STYLE_FILL_AREA(#291427); +#291427 = FILL_AREA_STYLE('',(#291428)); +#291428 = FILL_AREA_STYLE_COLOUR('',#285989); +#291429 = CURVE_STYLE('',#291430,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291431 = STYLED_ITEM('color',(#291432),#30768); +#291432 = PRESENTATION_STYLE_ASSIGNMENT((#291433,#291438)); +#291433 = SURFACE_STYLE_USAGE(.BOTH.,#291434); +#291434 = SURFACE_SIDE_STYLE('',(#291435)); +#291435 = SURFACE_STYLE_FILL_AREA(#291436); +#291436 = FILL_AREA_STYLE('',(#291437)); +#291437 = FILL_AREA_STYLE_COLOUR('',#285989); +#291438 = CURVE_STYLE('',#291439,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291440 = STYLED_ITEM('color',(#291441),#30785); +#291441 = PRESENTATION_STYLE_ASSIGNMENT((#291442,#291447)); +#291442 = SURFACE_STYLE_USAGE(.BOTH.,#291443); +#291443 = SURFACE_SIDE_STYLE('',(#291444)); +#291444 = SURFACE_STYLE_FILL_AREA(#291445); +#291445 = FILL_AREA_STYLE('',(#291446)); +#291446 = FILL_AREA_STYLE_COLOUR('',#285989); +#291447 = CURVE_STYLE('',#291448,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291449 = STYLED_ITEM('color',(#291450),#30802); +#291450 = PRESENTATION_STYLE_ASSIGNMENT((#291451,#291456)); +#291451 = SURFACE_STYLE_USAGE(.BOTH.,#291452); +#291452 = SURFACE_SIDE_STYLE('',(#291453)); +#291453 = SURFACE_STYLE_FILL_AREA(#291454); +#291454 = FILL_AREA_STYLE('',(#291455)); +#291455 = FILL_AREA_STYLE_COLOUR('',#285989); +#291456 = CURVE_STYLE('',#291457,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291458 = STYLED_ITEM('color',(#291459),#30819); +#291459 = PRESENTATION_STYLE_ASSIGNMENT((#291460,#291465)); +#291460 = SURFACE_STYLE_USAGE(.BOTH.,#291461); +#291461 = SURFACE_SIDE_STYLE('',(#291462)); +#291462 = SURFACE_STYLE_FILL_AREA(#291463); +#291463 = FILL_AREA_STYLE('',(#291464)); +#291464 = FILL_AREA_STYLE_COLOUR('',#285989); +#291465 = CURVE_STYLE('',#291466,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291467 = STYLED_ITEM('color',(#291468),#30836); +#291468 = PRESENTATION_STYLE_ASSIGNMENT((#291469,#291474)); +#291469 = SURFACE_STYLE_USAGE(.BOTH.,#291470); +#291470 = SURFACE_SIDE_STYLE('',(#291471)); +#291471 = SURFACE_STYLE_FILL_AREA(#291472); +#291472 = FILL_AREA_STYLE('',(#291473)); +#291473 = FILL_AREA_STYLE_COLOUR('',#285989); +#291474 = CURVE_STYLE('',#291475,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291476 = STYLED_ITEM('color',(#291477),#30848); +#291477 = PRESENTATION_STYLE_ASSIGNMENT((#291478,#291483)); +#291478 = SURFACE_STYLE_USAGE(.BOTH.,#291479); +#291479 = SURFACE_SIDE_STYLE('',(#291480)); +#291480 = SURFACE_STYLE_FILL_AREA(#291481); +#291481 = FILL_AREA_STYLE('',(#291482)); +#291482 = FILL_AREA_STYLE_COLOUR('',#285989); +#291483 = CURVE_STYLE('',#291484,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291485 = STYLED_ITEM('color',(#291486),#30865); +#291486 = PRESENTATION_STYLE_ASSIGNMENT((#291487,#291492)); +#291487 = SURFACE_STYLE_USAGE(.BOTH.,#291488); +#291488 = SURFACE_SIDE_STYLE('',(#291489)); +#291489 = SURFACE_STYLE_FILL_AREA(#291490); +#291490 = FILL_AREA_STYLE('',(#291491)); +#291491 = FILL_AREA_STYLE_COLOUR('',#285989); +#291492 = CURVE_STYLE('',#291493,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291494 = STYLED_ITEM('color',(#291495),#30882); +#291495 = PRESENTATION_STYLE_ASSIGNMENT((#291496,#291501)); +#291496 = SURFACE_STYLE_USAGE(.BOTH.,#291497); +#291497 = SURFACE_SIDE_STYLE('',(#291498)); +#291498 = SURFACE_STYLE_FILL_AREA(#291499); +#291499 = FILL_AREA_STYLE('',(#291500)); +#291500 = FILL_AREA_STYLE_COLOUR('',#285989); +#291501 = CURVE_STYLE('',#291502,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291503 = STYLED_ITEM('color',(#291504),#30899); +#291504 = PRESENTATION_STYLE_ASSIGNMENT((#291505,#291510)); +#291505 = SURFACE_STYLE_USAGE(.BOTH.,#291506); +#291506 = SURFACE_SIDE_STYLE('',(#291507)); +#291507 = SURFACE_STYLE_FILL_AREA(#291508); +#291508 = FILL_AREA_STYLE('',(#291509)); +#291509 = FILL_AREA_STYLE_COLOUR('',#285989); +#291510 = CURVE_STYLE('',#291511,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291512 = STYLED_ITEM('color',(#291513),#30916); +#291513 = PRESENTATION_STYLE_ASSIGNMENT((#291514,#291519)); +#291514 = SURFACE_STYLE_USAGE(.BOTH.,#291515); +#291515 = SURFACE_SIDE_STYLE('',(#291516)); +#291516 = SURFACE_STYLE_FILL_AREA(#291517); +#291517 = FILL_AREA_STYLE('',(#291518)); +#291518 = FILL_AREA_STYLE_COLOUR('',#285989); +#291519 = CURVE_STYLE('',#291520,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291521 = STYLED_ITEM('color',(#291522),#30928); +#291522 = PRESENTATION_STYLE_ASSIGNMENT((#291523,#291528)); +#291523 = SURFACE_STYLE_USAGE(.BOTH.,#291524); +#291524 = SURFACE_SIDE_STYLE('',(#291525)); +#291525 = SURFACE_STYLE_FILL_AREA(#291526); +#291526 = FILL_AREA_STYLE('',(#291527)); +#291527 = FILL_AREA_STYLE_COLOUR('',#285989); +#291528 = CURVE_STYLE('',#291529,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291530 = STYLED_ITEM('color',(#291531),#30945); +#291531 = PRESENTATION_STYLE_ASSIGNMENT((#291532,#291537)); +#291532 = SURFACE_STYLE_USAGE(.BOTH.,#291533); +#291533 = SURFACE_SIDE_STYLE('',(#291534)); +#291534 = SURFACE_STYLE_FILL_AREA(#291535); +#291535 = FILL_AREA_STYLE('',(#291536)); +#291536 = FILL_AREA_STYLE_COLOUR('',#285989); +#291537 = CURVE_STYLE('',#291538,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291539 = STYLED_ITEM('color',(#291540),#30962); +#291540 = PRESENTATION_STYLE_ASSIGNMENT((#291541,#291546)); +#291541 = SURFACE_STYLE_USAGE(.BOTH.,#291542); +#291542 = SURFACE_SIDE_STYLE('',(#291543)); +#291543 = SURFACE_STYLE_FILL_AREA(#291544); +#291544 = FILL_AREA_STYLE('',(#291545)); +#291545 = FILL_AREA_STYLE_COLOUR('',#285989); +#291546 = CURVE_STYLE('',#291547,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291548 = STYLED_ITEM('color',(#291549),#30979); +#291549 = PRESENTATION_STYLE_ASSIGNMENT((#291550,#291555)); +#291550 = SURFACE_STYLE_USAGE(.BOTH.,#291551); +#291551 = SURFACE_SIDE_STYLE('',(#291552)); +#291552 = SURFACE_STYLE_FILL_AREA(#291553); +#291553 = FILL_AREA_STYLE('',(#291554)); +#291554 = FILL_AREA_STYLE_COLOUR('',#285989); +#291555 = CURVE_STYLE('',#291556,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291557 = STYLED_ITEM('color',(#291558),#30996); +#291558 = PRESENTATION_STYLE_ASSIGNMENT((#291559,#291564)); +#291559 = SURFACE_STYLE_USAGE(.BOTH.,#291560); +#291560 = SURFACE_SIDE_STYLE('',(#291561)); +#291561 = SURFACE_STYLE_FILL_AREA(#291562); +#291562 = FILL_AREA_STYLE('',(#291563)); +#291563 = FILL_AREA_STYLE_COLOUR('',#285989); +#291564 = CURVE_STYLE('',#291565,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291566 = STYLED_ITEM('color',(#291567),#31008); +#291567 = PRESENTATION_STYLE_ASSIGNMENT((#291568,#291573)); +#291568 = SURFACE_STYLE_USAGE(.BOTH.,#291569); +#291569 = SURFACE_SIDE_STYLE('',(#291570)); +#291570 = SURFACE_STYLE_FILL_AREA(#291571); +#291571 = FILL_AREA_STYLE('',(#291572)); +#291572 = FILL_AREA_STYLE_COLOUR('',#285989); +#291573 = CURVE_STYLE('',#291574,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291575 = STYLED_ITEM('color',(#291576),#31025); +#291576 = PRESENTATION_STYLE_ASSIGNMENT((#291577,#291582)); +#291577 = SURFACE_STYLE_USAGE(.BOTH.,#291578); +#291578 = SURFACE_SIDE_STYLE('',(#291579)); +#291579 = SURFACE_STYLE_FILL_AREA(#291580); +#291580 = FILL_AREA_STYLE('',(#291581)); +#291581 = FILL_AREA_STYLE_COLOUR('',#285989); +#291582 = CURVE_STYLE('',#291583,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291584 = STYLED_ITEM('color',(#291585),#31042); +#291585 = PRESENTATION_STYLE_ASSIGNMENT((#291586,#291591)); +#291586 = SURFACE_STYLE_USAGE(.BOTH.,#291587); +#291587 = SURFACE_SIDE_STYLE('',(#291588)); +#291588 = SURFACE_STYLE_FILL_AREA(#291589); +#291589 = FILL_AREA_STYLE('',(#291590)); +#291590 = FILL_AREA_STYLE_COLOUR('',#285989); +#291591 = CURVE_STYLE('',#291592,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291593 = STYLED_ITEM('color',(#291594),#31059); +#291594 = PRESENTATION_STYLE_ASSIGNMENT((#291595,#291600)); +#291595 = SURFACE_STYLE_USAGE(.BOTH.,#291596); +#291596 = SURFACE_SIDE_STYLE('',(#291597)); +#291597 = SURFACE_STYLE_FILL_AREA(#291598); +#291598 = FILL_AREA_STYLE('',(#291599)); +#291599 = FILL_AREA_STYLE_COLOUR('',#285989); +#291600 = CURVE_STYLE('',#291601,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291602 = STYLED_ITEM('color',(#291603),#31076); +#291603 = PRESENTATION_STYLE_ASSIGNMENT((#291604,#291609)); +#291604 = SURFACE_STYLE_USAGE(.BOTH.,#291605); +#291605 = SURFACE_SIDE_STYLE('',(#291606)); +#291606 = SURFACE_STYLE_FILL_AREA(#291607); +#291607 = FILL_AREA_STYLE('',(#291608)); +#291608 = FILL_AREA_STYLE_COLOUR('',#285989); +#291609 = CURVE_STYLE('',#291610,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291610 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291611 = STYLED_ITEM('color',(#291612),#31088); +#291612 = PRESENTATION_STYLE_ASSIGNMENT((#291613,#291618)); +#291613 = SURFACE_STYLE_USAGE(.BOTH.,#291614); +#291614 = SURFACE_SIDE_STYLE('',(#291615)); +#291615 = SURFACE_STYLE_FILL_AREA(#291616); +#291616 = FILL_AREA_STYLE('',(#291617)); +#291617 = FILL_AREA_STYLE_COLOUR('',#285989); +#291618 = CURVE_STYLE('',#291619,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291619 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291620 = STYLED_ITEM('color',(#291621),#31105); +#291621 = PRESENTATION_STYLE_ASSIGNMENT((#291622,#291627)); +#291622 = SURFACE_STYLE_USAGE(.BOTH.,#291623); +#291623 = SURFACE_SIDE_STYLE('',(#291624)); +#291624 = SURFACE_STYLE_FILL_AREA(#291625); +#291625 = FILL_AREA_STYLE('',(#291626)); +#291626 = FILL_AREA_STYLE_COLOUR('',#285989); +#291627 = CURVE_STYLE('',#291628,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291628 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291629 = STYLED_ITEM('color',(#291630),#31122); +#291630 = PRESENTATION_STYLE_ASSIGNMENT((#291631,#291636)); +#291631 = SURFACE_STYLE_USAGE(.BOTH.,#291632); +#291632 = SURFACE_SIDE_STYLE('',(#291633)); +#291633 = SURFACE_STYLE_FILL_AREA(#291634); +#291634 = FILL_AREA_STYLE('',(#291635)); +#291635 = FILL_AREA_STYLE_COLOUR('',#285989); +#291636 = CURVE_STYLE('',#291637,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291637 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291638 = STYLED_ITEM('color',(#291639),#31139); +#291639 = PRESENTATION_STYLE_ASSIGNMENT((#291640,#291645)); +#291640 = SURFACE_STYLE_USAGE(.BOTH.,#291641); +#291641 = SURFACE_SIDE_STYLE('',(#291642)); +#291642 = SURFACE_STYLE_FILL_AREA(#291643); +#291643 = FILL_AREA_STYLE('',(#291644)); +#291644 = FILL_AREA_STYLE_COLOUR('',#285989); +#291645 = CURVE_STYLE('',#291646,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291647 = STYLED_ITEM('color',(#291648),#31156); +#291648 = PRESENTATION_STYLE_ASSIGNMENT((#291649,#291654)); +#291649 = SURFACE_STYLE_USAGE(.BOTH.,#291650); +#291650 = SURFACE_SIDE_STYLE('',(#291651)); +#291651 = SURFACE_STYLE_FILL_AREA(#291652); +#291652 = FILL_AREA_STYLE('',(#291653)); +#291653 = FILL_AREA_STYLE_COLOUR('',#285989); +#291654 = CURVE_STYLE('',#291655,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291655 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291656 = STYLED_ITEM('color',(#291657),#31168); +#291657 = PRESENTATION_STYLE_ASSIGNMENT((#291658,#291663)); +#291658 = SURFACE_STYLE_USAGE(.BOTH.,#291659); +#291659 = SURFACE_SIDE_STYLE('',(#291660)); +#291660 = SURFACE_STYLE_FILL_AREA(#291661); +#291661 = FILL_AREA_STYLE('',(#291662)); +#291662 = FILL_AREA_STYLE_COLOUR('',#285989); +#291663 = CURVE_STYLE('',#291664,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291664 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291665 = STYLED_ITEM('color',(#291666),#31185); +#291666 = PRESENTATION_STYLE_ASSIGNMENT((#291667,#291672)); +#291667 = SURFACE_STYLE_USAGE(.BOTH.,#291668); +#291668 = SURFACE_SIDE_STYLE('',(#291669)); +#291669 = SURFACE_STYLE_FILL_AREA(#291670); +#291670 = FILL_AREA_STYLE('',(#291671)); +#291671 = FILL_AREA_STYLE_COLOUR('',#285989); +#291672 = CURVE_STYLE('',#291673,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291673 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291674 = STYLED_ITEM('color',(#291675),#31202); +#291675 = PRESENTATION_STYLE_ASSIGNMENT((#291676,#291681)); +#291676 = SURFACE_STYLE_USAGE(.BOTH.,#291677); +#291677 = SURFACE_SIDE_STYLE('',(#291678)); +#291678 = SURFACE_STYLE_FILL_AREA(#291679); +#291679 = FILL_AREA_STYLE('',(#291680)); +#291680 = FILL_AREA_STYLE_COLOUR('',#285989); +#291681 = CURVE_STYLE('',#291682,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291682 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291683 = STYLED_ITEM('color',(#291684),#31219); +#291684 = PRESENTATION_STYLE_ASSIGNMENT((#291685,#291690)); +#291685 = SURFACE_STYLE_USAGE(.BOTH.,#291686); +#291686 = SURFACE_SIDE_STYLE('',(#291687)); +#291687 = SURFACE_STYLE_FILL_AREA(#291688); +#291688 = FILL_AREA_STYLE('',(#291689)); +#291689 = FILL_AREA_STYLE_COLOUR('',#285989); +#291690 = CURVE_STYLE('',#291691,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291691 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291692 = STYLED_ITEM('color',(#291693),#31236); +#291693 = PRESENTATION_STYLE_ASSIGNMENT((#291694,#291699)); +#291694 = SURFACE_STYLE_USAGE(.BOTH.,#291695); +#291695 = SURFACE_SIDE_STYLE('',(#291696)); +#291696 = SURFACE_STYLE_FILL_AREA(#291697); +#291697 = FILL_AREA_STYLE('',(#291698)); +#291698 = FILL_AREA_STYLE_COLOUR('',#285989); +#291699 = CURVE_STYLE('',#291700,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291700 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291701 = STYLED_ITEM('color',(#291702),#31248); +#291702 = PRESENTATION_STYLE_ASSIGNMENT((#291703,#291708)); +#291703 = SURFACE_STYLE_USAGE(.BOTH.,#291704); +#291704 = SURFACE_SIDE_STYLE('',(#291705)); +#291705 = SURFACE_STYLE_FILL_AREA(#291706); +#291706 = FILL_AREA_STYLE('',(#291707)); +#291707 = FILL_AREA_STYLE_COLOUR('',#285989); +#291708 = CURVE_STYLE('',#291709,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291709 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291710 = STYLED_ITEM('color',(#291711),#31265); +#291711 = PRESENTATION_STYLE_ASSIGNMENT((#291712,#291717)); +#291712 = SURFACE_STYLE_USAGE(.BOTH.,#291713); +#291713 = SURFACE_SIDE_STYLE('',(#291714)); +#291714 = SURFACE_STYLE_FILL_AREA(#291715); +#291715 = FILL_AREA_STYLE('',(#291716)); +#291716 = FILL_AREA_STYLE_COLOUR('',#285989); +#291717 = CURVE_STYLE('',#291718,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291718 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291719 = STYLED_ITEM('color',(#291720),#31282); +#291720 = PRESENTATION_STYLE_ASSIGNMENT((#291721,#291726)); +#291721 = SURFACE_STYLE_USAGE(.BOTH.,#291722); +#291722 = SURFACE_SIDE_STYLE('',(#291723)); +#291723 = SURFACE_STYLE_FILL_AREA(#291724); +#291724 = FILL_AREA_STYLE('',(#291725)); +#291725 = FILL_AREA_STYLE_COLOUR('',#285989); +#291726 = CURVE_STYLE('',#291727,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291727 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291728 = STYLED_ITEM('color',(#291729),#31299); +#291729 = PRESENTATION_STYLE_ASSIGNMENT((#291730,#291735)); +#291730 = SURFACE_STYLE_USAGE(.BOTH.,#291731); +#291731 = SURFACE_SIDE_STYLE('',(#291732)); +#291732 = SURFACE_STYLE_FILL_AREA(#291733); +#291733 = FILL_AREA_STYLE('',(#291734)); +#291734 = FILL_AREA_STYLE_COLOUR('',#285989); +#291735 = CURVE_STYLE('',#291736,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291736 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291737 = STYLED_ITEM('color',(#291738),#31316); +#291738 = PRESENTATION_STYLE_ASSIGNMENT((#291739,#291744)); +#291739 = SURFACE_STYLE_USAGE(.BOTH.,#291740); +#291740 = SURFACE_SIDE_STYLE('',(#291741)); +#291741 = SURFACE_STYLE_FILL_AREA(#291742); +#291742 = FILL_AREA_STYLE('',(#291743)); +#291743 = FILL_AREA_STYLE_COLOUR('',#285989); +#291744 = CURVE_STYLE('',#291745,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291745 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291746 = STYLED_ITEM('color',(#291747),#31328); +#291747 = PRESENTATION_STYLE_ASSIGNMENT((#291748,#291753)); +#291748 = SURFACE_STYLE_USAGE(.BOTH.,#291749); +#291749 = SURFACE_SIDE_STYLE('',(#291750)); +#291750 = SURFACE_STYLE_FILL_AREA(#291751); +#291751 = FILL_AREA_STYLE('',(#291752)); +#291752 = FILL_AREA_STYLE_COLOUR('',#285989); +#291753 = CURVE_STYLE('',#291754,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291754 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291755 = STYLED_ITEM('color',(#291756),#31345); +#291756 = PRESENTATION_STYLE_ASSIGNMENT((#291757,#291762)); +#291757 = SURFACE_STYLE_USAGE(.BOTH.,#291758); +#291758 = SURFACE_SIDE_STYLE('',(#291759)); +#291759 = SURFACE_STYLE_FILL_AREA(#291760); +#291760 = FILL_AREA_STYLE('',(#291761)); +#291761 = FILL_AREA_STYLE_COLOUR('',#285989); +#291762 = CURVE_STYLE('',#291763,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291763 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291764 = STYLED_ITEM('color',(#291765),#31362); +#291765 = PRESENTATION_STYLE_ASSIGNMENT((#291766,#291771)); +#291766 = SURFACE_STYLE_USAGE(.BOTH.,#291767); +#291767 = SURFACE_SIDE_STYLE('',(#291768)); +#291768 = SURFACE_STYLE_FILL_AREA(#291769); +#291769 = FILL_AREA_STYLE('',(#291770)); +#291770 = FILL_AREA_STYLE_COLOUR('',#285989); +#291771 = CURVE_STYLE('',#291772,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291772 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291773 = STYLED_ITEM('color',(#291774),#31379); +#291774 = PRESENTATION_STYLE_ASSIGNMENT((#291775,#291780)); +#291775 = SURFACE_STYLE_USAGE(.BOTH.,#291776); +#291776 = SURFACE_SIDE_STYLE('',(#291777)); +#291777 = SURFACE_STYLE_FILL_AREA(#291778); +#291778 = FILL_AREA_STYLE('',(#291779)); +#291779 = FILL_AREA_STYLE_COLOUR('',#285989); +#291780 = CURVE_STYLE('',#291781,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291781 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291782 = STYLED_ITEM('color',(#291783),#31396); +#291783 = PRESENTATION_STYLE_ASSIGNMENT((#291784,#291789)); +#291784 = SURFACE_STYLE_USAGE(.BOTH.,#291785); +#291785 = SURFACE_SIDE_STYLE('',(#291786)); +#291786 = SURFACE_STYLE_FILL_AREA(#291787); +#291787 = FILL_AREA_STYLE('',(#291788)); +#291788 = FILL_AREA_STYLE_COLOUR('',#285989); +#291789 = CURVE_STYLE('',#291790,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291790 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291791 = STYLED_ITEM('color',(#291792),#31408); +#291792 = PRESENTATION_STYLE_ASSIGNMENT((#291793,#291798)); +#291793 = SURFACE_STYLE_USAGE(.BOTH.,#291794); +#291794 = SURFACE_SIDE_STYLE('',(#291795)); +#291795 = SURFACE_STYLE_FILL_AREA(#291796); +#291796 = FILL_AREA_STYLE('',(#291797)); +#291797 = FILL_AREA_STYLE_COLOUR('',#285989); +#291798 = CURVE_STYLE('',#291799,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291799 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291800 = STYLED_ITEM('color',(#291801),#31425); +#291801 = PRESENTATION_STYLE_ASSIGNMENT((#291802,#291807)); +#291802 = SURFACE_STYLE_USAGE(.BOTH.,#291803); +#291803 = SURFACE_SIDE_STYLE('',(#291804)); +#291804 = SURFACE_STYLE_FILL_AREA(#291805); +#291805 = FILL_AREA_STYLE('',(#291806)); +#291806 = FILL_AREA_STYLE_COLOUR('',#285989); +#291807 = CURVE_STYLE('',#291808,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291808 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291809 = STYLED_ITEM('color',(#291810),#31442); +#291810 = PRESENTATION_STYLE_ASSIGNMENT((#291811,#291816)); +#291811 = SURFACE_STYLE_USAGE(.BOTH.,#291812); +#291812 = SURFACE_SIDE_STYLE('',(#291813)); +#291813 = SURFACE_STYLE_FILL_AREA(#291814); +#291814 = FILL_AREA_STYLE('',(#291815)); +#291815 = FILL_AREA_STYLE_COLOUR('',#285989); +#291816 = CURVE_STYLE('',#291817,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291817 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291818 = STYLED_ITEM('color',(#291819),#31459); +#291819 = PRESENTATION_STYLE_ASSIGNMENT((#291820,#291825)); +#291820 = SURFACE_STYLE_USAGE(.BOTH.,#291821); +#291821 = SURFACE_SIDE_STYLE('',(#291822)); +#291822 = SURFACE_STYLE_FILL_AREA(#291823); +#291823 = FILL_AREA_STYLE('',(#291824)); +#291824 = FILL_AREA_STYLE_COLOUR('',#285989); +#291825 = CURVE_STYLE('',#291826,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291827 = STYLED_ITEM('color',(#291828),#31476); +#291828 = PRESENTATION_STYLE_ASSIGNMENT((#291829,#291834)); +#291829 = SURFACE_STYLE_USAGE(.BOTH.,#291830); +#291830 = SURFACE_SIDE_STYLE('',(#291831)); +#291831 = SURFACE_STYLE_FILL_AREA(#291832); +#291832 = FILL_AREA_STYLE('',(#291833)); +#291833 = FILL_AREA_STYLE_COLOUR('',#285989); +#291834 = CURVE_STYLE('',#291835,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291835 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291836 = STYLED_ITEM('color',(#291837),#31488); +#291837 = PRESENTATION_STYLE_ASSIGNMENT((#291838,#291843)); +#291838 = SURFACE_STYLE_USAGE(.BOTH.,#291839); +#291839 = SURFACE_SIDE_STYLE('',(#291840)); +#291840 = SURFACE_STYLE_FILL_AREA(#291841); +#291841 = FILL_AREA_STYLE('',(#291842)); +#291842 = FILL_AREA_STYLE_COLOUR('',#285989); +#291843 = CURVE_STYLE('',#291844,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291844 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291845 = STYLED_ITEM('color',(#291846),#31505); +#291846 = PRESENTATION_STYLE_ASSIGNMENT((#291847,#291852)); +#291847 = SURFACE_STYLE_USAGE(.BOTH.,#291848); +#291848 = SURFACE_SIDE_STYLE('',(#291849)); +#291849 = SURFACE_STYLE_FILL_AREA(#291850); +#291850 = FILL_AREA_STYLE('',(#291851)); +#291851 = FILL_AREA_STYLE_COLOUR('',#285989); +#291852 = CURVE_STYLE('',#291853,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291853 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291854 = STYLED_ITEM('color',(#291855),#31522); +#291855 = PRESENTATION_STYLE_ASSIGNMENT((#291856,#291861)); +#291856 = SURFACE_STYLE_USAGE(.BOTH.,#291857); +#291857 = SURFACE_SIDE_STYLE('',(#291858)); +#291858 = SURFACE_STYLE_FILL_AREA(#291859); +#291859 = FILL_AREA_STYLE('',(#291860)); +#291860 = FILL_AREA_STYLE_COLOUR('',#285989); +#291861 = CURVE_STYLE('',#291862,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291862 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291863 = STYLED_ITEM('color',(#291864),#31539); +#291864 = PRESENTATION_STYLE_ASSIGNMENT((#291865,#291870)); +#291865 = SURFACE_STYLE_USAGE(.BOTH.,#291866); +#291866 = SURFACE_SIDE_STYLE('',(#291867)); +#291867 = SURFACE_STYLE_FILL_AREA(#291868); +#291868 = FILL_AREA_STYLE('',(#291869)); +#291869 = FILL_AREA_STYLE_COLOUR('',#285989); +#291870 = CURVE_STYLE('',#291871,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291871 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291872 = STYLED_ITEM('color',(#291873),#31556); +#291873 = PRESENTATION_STYLE_ASSIGNMENT((#291874,#291879)); +#291874 = SURFACE_STYLE_USAGE(.BOTH.,#291875); +#291875 = SURFACE_SIDE_STYLE('',(#291876)); +#291876 = SURFACE_STYLE_FILL_AREA(#291877); +#291877 = FILL_AREA_STYLE('',(#291878)); +#291878 = FILL_AREA_STYLE_COLOUR('',#285989); +#291879 = CURVE_STYLE('',#291880,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291880 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291881 = STYLED_ITEM('color',(#291882),#31568); +#291882 = PRESENTATION_STYLE_ASSIGNMENT((#291883,#291888)); +#291883 = SURFACE_STYLE_USAGE(.BOTH.,#291884); +#291884 = SURFACE_SIDE_STYLE('',(#291885)); +#291885 = SURFACE_STYLE_FILL_AREA(#291886); +#291886 = FILL_AREA_STYLE('',(#291887)); +#291887 = FILL_AREA_STYLE_COLOUR('',#285989); +#291888 = CURVE_STYLE('',#291889,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291889 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291890 = STYLED_ITEM('color',(#291891),#31585); +#291891 = PRESENTATION_STYLE_ASSIGNMENT((#291892,#291897)); +#291892 = SURFACE_STYLE_USAGE(.BOTH.,#291893); +#291893 = SURFACE_SIDE_STYLE('',(#291894)); +#291894 = SURFACE_STYLE_FILL_AREA(#291895); +#291895 = FILL_AREA_STYLE('',(#291896)); +#291896 = FILL_AREA_STYLE_COLOUR('',#285989); +#291897 = CURVE_STYLE('',#291898,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291898 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291899 = STYLED_ITEM('color',(#291900),#31602); +#291900 = PRESENTATION_STYLE_ASSIGNMENT((#291901,#291906)); +#291901 = SURFACE_STYLE_USAGE(.BOTH.,#291902); +#291902 = SURFACE_SIDE_STYLE('',(#291903)); +#291903 = SURFACE_STYLE_FILL_AREA(#291904); +#291904 = FILL_AREA_STYLE('',(#291905)); +#291905 = FILL_AREA_STYLE_COLOUR('',#285989); +#291906 = CURVE_STYLE('',#291907,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291907 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291908 = STYLED_ITEM('color',(#291909),#31619); +#291909 = PRESENTATION_STYLE_ASSIGNMENT((#291910,#291915)); +#291910 = SURFACE_STYLE_USAGE(.BOTH.,#291911); +#291911 = SURFACE_SIDE_STYLE('',(#291912)); +#291912 = SURFACE_STYLE_FILL_AREA(#291913); +#291913 = FILL_AREA_STYLE('',(#291914)); +#291914 = FILL_AREA_STYLE_COLOUR('',#285989); +#291915 = CURVE_STYLE('',#291916,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291916 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291917 = STYLED_ITEM('color',(#291918),#31636); +#291918 = PRESENTATION_STYLE_ASSIGNMENT((#291919,#291924)); +#291919 = SURFACE_STYLE_USAGE(.BOTH.,#291920); +#291920 = SURFACE_SIDE_STYLE('',(#291921)); +#291921 = SURFACE_STYLE_FILL_AREA(#291922); +#291922 = FILL_AREA_STYLE('',(#291923)); +#291923 = FILL_AREA_STYLE_COLOUR('',#285989); +#291924 = CURVE_STYLE('',#291925,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291926 = STYLED_ITEM('color',(#291927),#31648); +#291927 = PRESENTATION_STYLE_ASSIGNMENT((#291928,#291933)); +#291928 = SURFACE_STYLE_USAGE(.BOTH.,#291929); +#291929 = SURFACE_SIDE_STYLE('',(#291930)); +#291930 = SURFACE_STYLE_FILL_AREA(#291931); +#291931 = FILL_AREA_STYLE('',(#291932)); +#291932 = FILL_AREA_STYLE_COLOUR('',#285989); +#291933 = CURVE_STYLE('',#291934,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291934 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291935 = STYLED_ITEM('color',(#291936),#31665); +#291936 = PRESENTATION_STYLE_ASSIGNMENT((#291937,#291942)); +#291937 = SURFACE_STYLE_USAGE(.BOTH.,#291938); +#291938 = SURFACE_SIDE_STYLE('',(#291939)); +#291939 = SURFACE_STYLE_FILL_AREA(#291940); +#291940 = FILL_AREA_STYLE('',(#291941)); +#291941 = FILL_AREA_STYLE_COLOUR('',#285989); +#291942 = CURVE_STYLE('',#291943,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291943 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291944 = STYLED_ITEM('color',(#291945),#31682); +#291945 = PRESENTATION_STYLE_ASSIGNMENT((#291946,#291951)); +#291946 = SURFACE_STYLE_USAGE(.BOTH.,#291947); +#291947 = SURFACE_SIDE_STYLE('',(#291948)); +#291948 = SURFACE_STYLE_FILL_AREA(#291949); +#291949 = FILL_AREA_STYLE('',(#291950)); +#291950 = FILL_AREA_STYLE_COLOUR('',#285989); +#291951 = CURVE_STYLE('',#291952,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291952 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291953 = STYLED_ITEM('color',(#291954),#31699); +#291954 = PRESENTATION_STYLE_ASSIGNMENT((#291955,#291960)); +#291955 = SURFACE_STYLE_USAGE(.BOTH.,#291956); +#291956 = SURFACE_SIDE_STYLE('',(#291957)); +#291957 = SURFACE_STYLE_FILL_AREA(#291958); +#291958 = FILL_AREA_STYLE('',(#291959)); +#291959 = FILL_AREA_STYLE_COLOUR('',#285989); +#291960 = CURVE_STYLE('',#291961,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291961 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291962 = STYLED_ITEM('color',(#291963),#31716); +#291963 = PRESENTATION_STYLE_ASSIGNMENT((#291964,#291969)); +#291964 = SURFACE_STYLE_USAGE(.BOTH.,#291965); +#291965 = SURFACE_SIDE_STYLE('',(#291966)); +#291966 = SURFACE_STYLE_FILL_AREA(#291967); +#291967 = FILL_AREA_STYLE('',(#291968)); +#291968 = FILL_AREA_STYLE_COLOUR('',#285989); +#291969 = CURVE_STYLE('',#291970,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291970 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291971 = STYLED_ITEM('color',(#291972),#31728); +#291972 = PRESENTATION_STYLE_ASSIGNMENT((#291973,#291978)); +#291973 = SURFACE_STYLE_USAGE(.BOTH.,#291974); +#291974 = SURFACE_SIDE_STYLE('',(#291975)); +#291975 = SURFACE_STYLE_FILL_AREA(#291976); +#291976 = FILL_AREA_STYLE('',(#291977)); +#291977 = FILL_AREA_STYLE_COLOUR('',#285989); +#291978 = CURVE_STYLE('',#291979,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291980 = STYLED_ITEM('color',(#291981),#31745); +#291981 = PRESENTATION_STYLE_ASSIGNMENT((#291982,#291987)); +#291982 = SURFACE_STYLE_USAGE(.BOTH.,#291983); +#291983 = SURFACE_SIDE_STYLE('',(#291984)); +#291984 = SURFACE_STYLE_FILL_AREA(#291985); +#291985 = FILL_AREA_STYLE('',(#291986)); +#291986 = FILL_AREA_STYLE_COLOUR('',#285989); +#291987 = CURVE_STYLE('',#291988,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291988 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291989 = STYLED_ITEM('color',(#291990),#31762); +#291990 = PRESENTATION_STYLE_ASSIGNMENT((#291991,#291996)); +#291991 = SURFACE_STYLE_USAGE(.BOTH.,#291992); +#291992 = SURFACE_SIDE_STYLE('',(#291993)); +#291993 = SURFACE_STYLE_FILL_AREA(#291994); +#291994 = FILL_AREA_STYLE('',(#291995)); +#291995 = FILL_AREA_STYLE_COLOUR('',#285989); +#291996 = CURVE_STYLE('',#291997,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#291997 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#291998 = STYLED_ITEM('color',(#291999),#31779); +#291999 = PRESENTATION_STYLE_ASSIGNMENT((#292000,#292005)); +#292000 = SURFACE_STYLE_USAGE(.BOTH.,#292001); +#292001 = SURFACE_SIDE_STYLE('',(#292002)); +#292002 = SURFACE_STYLE_FILL_AREA(#292003); +#292003 = FILL_AREA_STYLE('',(#292004)); +#292004 = FILL_AREA_STYLE_COLOUR('',#285989); +#292005 = CURVE_STYLE('',#292006,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292007 = STYLED_ITEM('color',(#292008),#31796); +#292008 = PRESENTATION_STYLE_ASSIGNMENT((#292009,#292014)); +#292009 = SURFACE_STYLE_USAGE(.BOTH.,#292010); +#292010 = SURFACE_SIDE_STYLE('',(#292011)); +#292011 = SURFACE_STYLE_FILL_AREA(#292012); +#292012 = FILL_AREA_STYLE('',(#292013)); +#292013 = FILL_AREA_STYLE_COLOUR('',#285989); +#292014 = CURVE_STYLE('',#292015,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292015 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292016 = STYLED_ITEM('color',(#292017),#31808); +#292017 = PRESENTATION_STYLE_ASSIGNMENT((#292018,#292023)); +#292018 = SURFACE_STYLE_USAGE(.BOTH.,#292019); +#292019 = SURFACE_SIDE_STYLE('',(#292020)); +#292020 = SURFACE_STYLE_FILL_AREA(#292021); +#292021 = FILL_AREA_STYLE('',(#292022)); +#292022 = FILL_AREA_STYLE_COLOUR('',#285989); +#292023 = CURVE_STYLE('',#292024,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292024 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292025 = STYLED_ITEM('color',(#292026),#31825); +#292026 = PRESENTATION_STYLE_ASSIGNMENT((#292027,#292032)); +#292027 = SURFACE_STYLE_USAGE(.BOTH.,#292028); +#292028 = SURFACE_SIDE_STYLE('',(#292029)); +#292029 = SURFACE_STYLE_FILL_AREA(#292030); +#292030 = FILL_AREA_STYLE('',(#292031)); +#292031 = FILL_AREA_STYLE_COLOUR('',#285989); +#292032 = CURVE_STYLE('',#292033,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292034 = STYLED_ITEM('color',(#292035),#31842); +#292035 = PRESENTATION_STYLE_ASSIGNMENT((#292036,#292041)); +#292036 = SURFACE_STYLE_USAGE(.BOTH.,#292037); +#292037 = SURFACE_SIDE_STYLE('',(#292038)); +#292038 = SURFACE_STYLE_FILL_AREA(#292039); +#292039 = FILL_AREA_STYLE('',(#292040)); +#292040 = FILL_AREA_STYLE_COLOUR('',#285989); +#292041 = CURVE_STYLE('',#292042,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292042 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292043 = STYLED_ITEM('color',(#292044),#31859); +#292044 = PRESENTATION_STYLE_ASSIGNMENT((#292045,#292050)); +#292045 = SURFACE_STYLE_USAGE(.BOTH.,#292046); +#292046 = SURFACE_SIDE_STYLE('',(#292047)); +#292047 = SURFACE_STYLE_FILL_AREA(#292048); +#292048 = FILL_AREA_STYLE('',(#292049)); +#292049 = FILL_AREA_STYLE_COLOUR('',#285989); +#292050 = CURVE_STYLE('',#292051,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292051 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292052 = STYLED_ITEM('color',(#292053),#31876); +#292053 = PRESENTATION_STYLE_ASSIGNMENT((#292054,#292059)); +#292054 = SURFACE_STYLE_USAGE(.BOTH.,#292055); +#292055 = SURFACE_SIDE_STYLE('',(#292056)); +#292056 = SURFACE_STYLE_FILL_AREA(#292057); +#292057 = FILL_AREA_STYLE('',(#292058)); +#292058 = FILL_AREA_STYLE_COLOUR('',#285989); +#292059 = CURVE_STYLE('',#292060,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292060 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292061 = STYLED_ITEM('color',(#292062),#31888); +#292062 = PRESENTATION_STYLE_ASSIGNMENT((#292063,#292068)); +#292063 = SURFACE_STYLE_USAGE(.BOTH.,#292064); +#292064 = SURFACE_SIDE_STYLE('',(#292065)); +#292065 = SURFACE_STYLE_FILL_AREA(#292066); +#292066 = FILL_AREA_STYLE('',(#292067)); +#292067 = FILL_AREA_STYLE_COLOUR('',#270350); +#292068 = CURVE_STYLE('',#292069,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292069 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292070 = OVER_RIDING_STYLED_ITEM('overriding color',(#292071),#31895, + #292061); +#292071 = PRESENTATION_STYLE_ASSIGNMENT((#292072,#292077)); +#292072 = SURFACE_STYLE_USAGE(.BOTH.,#292073); +#292073 = SURFACE_SIDE_STYLE('',(#292074)); +#292074 = SURFACE_STYLE_FILL_AREA(#292075); +#292075 = FILL_AREA_STYLE('',(#292076)); +#292076 = FILL_AREA_STYLE_COLOUR('',#285989); +#292077 = CURVE_STYLE('',#292078,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292078 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292079 = STYLED_ITEM('color',(#292080),#31905); +#292080 = PRESENTATION_STYLE_ASSIGNMENT((#292081,#292086)); +#292081 = SURFACE_STYLE_USAGE(.BOTH.,#292082); +#292082 = SURFACE_SIDE_STYLE('',(#292083)); +#292083 = SURFACE_STYLE_FILL_AREA(#292084); +#292084 = FILL_AREA_STYLE('',(#292085)); +#292085 = FILL_AREA_STYLE_COLOUR('',#270350); +#292086 = CURVE_STYLE('',#292087,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292087 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292088 = OVER_RIDING_STYLED_ITEM('overriding color',(#292089),#31910, + #292079); +#292089 = PRESENTATION_STYLE_ASSIGNMENT((#292090,#292095)); +#292090 = SURFACE_STYLE_USAGE(.BOTH.,#292091); +#292091 = SURFACE_SIDE_STYLE('',(#292092)); +#292092 = SURFACE_STYLE_FILL_AREA(#292093); +#292093 = FILL_AREA_STYLE('',(#292094)); +#292094 = FILL_AREA_STYLE_COLOUR('',#285989); +#292095 = CURVE_STYLE('',#292096,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292096 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292097 = STYLED_ITEM('color',(#292098),#31922); +#292098 = PRESENTATION_STYLE_ASSIGNMENT((#292099,#292104)); +#292099 = SURFACE_STYLE_USAGE(.BOTH.,#292100); +#292100 = SURFACE_SIDE_STYLE('',(#292101)); +#292101 = SURFACE_STYLE_FILL_AREA(#292102); +#292102 = FILL_AREA_STYLE('',(#292103)); +#292103 = FILL_AREA_STYLE_COLOUR('',#285989); +#292104 = CURVE_STYLE('',#292105,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292105 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292106 = STYLED_ITEM('color',(#292107),#31971); +#292107 = PRESENTATION_STYLE_ASSIGNMENT((#292108,#292113)); +#292108 = SURFACE_STYLE_USAGE(.BOTH.,#292109); +#292109 = SURFACE_SIDE_STYLE('',(#292110)); +#292110 = SURFACE_STYLE_FILL_AREA(#292111); +#292111 = FILL_AREA_STYLE('',(#292112)); +#292112 = FILL_AREA_STYLE_COLOUR('',#285989); +#292113 = CURVE_STYLE('',#292114,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292114 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292115 = STYLED_ITEM('color',(#292116),#31995); +#292116 = PRESENTATION_STYLE_ASSIGNMENT((#292117,#292122)); +#292117 = SURFACE_STYLE_USAGE(.BOTH.,#292118); +#292118 = SURFACE_SIDE_STYLE('',(#292119)); +#292119 = SURFACE_STYLE_FILL_AREA(#292120); +#292120 = FILL_AREA_STYLE('',(#292121)); +#292121 = FILL_AREA_STYLE_COLOUR('',#285989); +#292122 = CURVE_STYLE('',#292123,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292123 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292124 = STYLED_ITEM('color',(#292125),#32037); +#292125 = PRESENTATION_STYLE_ASSIGNMENT((#292126,#292131)); +#292126 = SURFACE_STYLE_USAGE(.BOTH.,#292127); +#292127 = SURFACE_SIDE_STYLE('',(#292128)); +#292128 = SURFACE_STYLE_FILL_AREA(#292129); +#292129 = FILL_AREA_STYLE('',(#292130)); +#292130 = FILL_AREA_STYLE_COLOUR('',#285989); +#292131 = CURVE_STYLE('',#292132,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292132 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292133 = STYLED_ITEM('color',(#292134),#32054); +#292134 = PRESENTATION_STYLE_ASSIGNMENT((#292135,#292140)); +#292135 = SURFACE_STYLE_USAGE(.BOTH.,#292136); +#292136 = SURFACE_SIDE_STYLE('',(#292137)); +#292137 = SURFACE_STYLE_FILL_AREA(#292138); +#292138 = FILL_AREA_STYLE('',(#292139)); +#292139 = FILL_AREA_STYLE_COLOUR('',#270350); +#292140 = CURVE_STYLE('',#292141,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292141 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292142 = OVER_RIDING_STYLED_ITEM('overriding color',(#292143),#32061, + #292133); +#292143 = PRESENTATION_STYLE_ASSIGNMENT((#292144,#292149)); +#292144 = SURFACE_STYLE_USAGE(.BOTH.,#292145); +#292145 = SURFACE_SIDE_STYLE('',(#292146)); +#292146 = SURFACE_STYLE_FILL_AREA(#292147); +#292147 = FILL_AREA_STYLE('',(#292148)); +#292148 = FILL_AREA_STYLE_COLOUR('',#285989); +#292149 = CURVE_STYLE('',#292150,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292150 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292151 = STYLED_ITEM('color',(#292152),#32071); +#292152 = PRESENTATION_STYLE_ASSIGNMENT((#292153,#292158)); +#292153 = SURFACE_STYLE_USAGE(.BOTH.,#292154); +#292154 = SURFACE_SIDE_STYLE('',(#292155)); +#292155 = SURFACE_STYLE_FILL_AREA(#292156); +#292156 = FILL_AREA_STYLE('',(#292157)); +#292157 = FILL_AREA_STYLE_COLOUR('',#270350); +#292158 = CURVE_STYLE('',#292159,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292159 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292160 = OVER_RIDING_STYLED_ITEM('overriding color',(#292161),#32076, + #292151); +#292161 = PRESENTATION_STYLE_ASSIGNMENT((#292162,#292167)); +#292162 = SURFACE_STYLE_USAGE(.BOTH.,#292163); +#292163 = SURFACE_SIDE_STYLE('',(#292164)); +#292164 = SURFACE_STYLE_FILL_AREA(#292165); +#292165 = FILL_AREA_STYLE('',(#292166)); +#292166 = FILL_AREA_STYLE_COLOUR('',#285989); +#292167 = CURVE_STYLE('',#292168,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292168 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292169 = STYLED_ITEM('color',(#292170),#32088); +#292170 = PRESENTATION_STYLE_ASSIGNMENT((#292171,#292176)); +#292171 = SURFACE_STYLE_USAGE(.BOTH.,#292172); +#292172 = SURFACE_SIDE_STYLE('',(#292173)); +#292173 = SURFACE_STYLE_FILL_AREA(#292174); +#292174 = FILL_AREA_STYLE('',(#292175)); +#292175 = FILL_AREA_STYLE_COLOUR('',#285989); +#292176 = CURVE_STYLE('',#292177,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292177 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292178 = STYLED_ITEM('color',(#292179),#32137); +#292179 = PRESENTATION_STYLE_ASSIGNMENT((#292180,#292185)); +#292180 = SURFACE_STYLE_USAGE(.BOTH.,#292181); +#292181 = SURFACE_SIDE_STYLE('',(#292182)); +#292182 = SURFACE_STYLE_FILL_AREA(#292183); +#292183 = FILL_AREA_STYLE('',(#292184)); +#292184 = FILL_AREA_STYLE_COLOUR('',#285989); +#292185 = CURVE_STYLE('',#292186,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292186 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292187 = STYLED_ITEM('color',(#292188),#32161); +#292188 = PRESENTATION_STYLE_ASSIGNMENT((#292189,#292194)); +#292189 = SURFACE_STYLE_USAGE(.BOTH.,#292190); +#292190 = SURFACE_SIDE_STYLE('',(#292191)); +#292191 = SURFACE_STYLE_FILL_AREA(#292192); +#292192 = FILL_AREA_STYLE('',(#292193)); +#292193 = FILL_AREA_STYLE_COLOUR('',#285989); +#292194 = CURVE_STYLE('',#292195,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292195 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292196 = STYLED_ITEM('color',(#292197),#32203); +#292197 = PRESENTATION_STYLE_ASSIGNMENT((#292198,#292203)); +#292198 = SURFACE_STYLE_USAGE(.BOTH.,#292199); +#292199 = SURFACE_SIDE_STYLE('',(#292200)); +#292200 = SURFACE_STYLE_FILL_AREA(#292201); +#292201 = FILL_AREA_STYLE('',(#292202)); +#292202 = FILL_AREA_STYLE_COLOUR('',#285989); +#292203 = CURVE_STYLE('',#292204,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292204 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292205 = STYLED_ITEM('color',(#292206),#32220); +#292206 = PRESENTATION_STYLE_ASSIGNMENT((#292207,#292212)); +#292207 = SURFACE_STYLE_USAGE(.BOTH.,#292208); +#292208 = SURFACE_SIDE_STYLE('',(#292209)); +#292209 = SURFACE_STYLE_FILL_AREA(#292210); +#292210 = FILL_AREA_STYLE('',(#292211)); +#292211 = FILL_AREA_STYLE_COLOUR('',#270350); +#292212 = CURVE_STYLE('',#292213,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292213 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292214 = OVER_RIDING_STYLED_ITEM('overriding color',(#292215),#32227, + #292205); +#292215 = PRESENTATION_STYLE_ASSIGNMENT((#292216,#292221)); +#292216 = SURFACE_STYLE_USAGE(.BOTH.,#292217); +#292217 = SURFACE_SIDE_STYLE('',(#292218)); +#292218 = SURFACE_STYLE_FILL_AREA(#292219); +#292219 = FILL_AREA_STYLE('',(#292220)); +#292220 = FILL_AREA_STYLE_COLOUR('',#285989); +#292221 = CURVE_STYLE('',#292222,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292222 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292223 = STYLED_ITEM('color',(#292224),#32237); +#292224 = PRESENTATION_STYLE_ASSIGNMENT((#292225,#292230)); +#292225 = SURFACE_STYLE_USAGE(.BOTH.,#292226); +#292226 = SURFACE_SIDE_STYLE('',(#292227)); +#292227 = SURFACE_STYLE_FILL_AREA(#292228); +#292228 = FILL_AREA_STYLE('',(#292229)); +#292229 = FILL_AREA_STYLE_COLOUR('',#270350); +#292230 = CURVE_STYLE('',#292231,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292231 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292232 = OVER_RIDING_STYLED_ITEM('overriding color',(#292233),#32242, + #292223); +#292233 = PRESENTATION_STYLE_ASSIGNMENT((#292234,#292239)); +#292234 = SURFACE_STYLE_USAGE(.BOTH.,#292235); +#292235 = SURFACE_SIDE_STYLE('',(#292236)); +#292236 = SURFACE_STYLE_FILL_AREA(#292237); +#292237 = FILL_AREA_STYLE('',(#292238)); +#292238 = FILL_AREA_STYLE_COLOUR('',#285989); +#292239 = CURVE_STYLE('',#292240,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292240 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292241 = STYLED_ITEM('color',(#292242),#32254); +#292242 = PRESENTATION_STYLE_ASSIGNMENT((#292243,#292248)); +#292243 = SURFACE_STYLE_USAGE(.BOTH.,#292244); +#292244 = SURFACE_SIDE_STYLE('',(#292245)); +#292245 = SURFACE_STYLE_FILL_AREA(#292246); +#292246 = FILL_AREA_STYLE('',(#292247)); +#292247 = FILL_AREA_STYLE_COLOUR('',#285989); +#292248 = CURVE_STYLE('',#292249,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292249 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292250 = STYLED_ITEM('color',(#292251),#32303); +#292251 = PRESENTATION_STYLE_ASSIGNMENT((#292252,#292257)); +#292252 = SURFACE_STYLE_USAGE(.BOTH.,#292253); +#292253 = SURFACE_SIDE_STYLE('',(#292254)); +#292254 = SURFACE_STYLE_FILL_AREA(#292255); +#292255 = FILL_AREA_STYLE('',(#292256)); +#292256 = FILL_AREA_STYLE_COLOUR('',#285989); +#292257 = CURVE_STYLE('',#292258,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292258 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292259 = STYLED_ITEM('color',(#292260),#32327); +#292260 = PRESENTATION_STYLE_ASSIGNMENT((#292261,#292266)); +#292261 = SURFACE_STYLE_USAGE(.BOTH.,#292262); +#292262 = SURFACE_SIDE_STYLE('',(#292263)); +#292263 = SURFACE_STYLE_FILL_AREA(#292264); +#292264 = FILL_AREA_STYLE('',(#292265)); +#292265 = FILL_AREA_STYLE_COLOUR('',#285989); +#292266 = CURVE_STYLE('',#292267,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292267 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292268 = STYLED_ITEM('color',(#292269),#32369); +#292269 = PRESENTATION_STYLE_ASSIGNMENT((#292270,#292275)); +#292270 = SURFACE_STYLE_USAGE(.BOTH.,#292271); +#292271 = SURFACE_SIDE_STYLE('',(#292272)); +#292272 = SURFACE_STYLE_FILL_AREA(#292273); +#292273 = FILL_AREA_STYLE('',(#292274)); +#292274 = FILL_AREA_STYLE_COLOUR('',#285989); +#292275 = CURVE_STYLE('',#292276,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292276 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292277 = STYLED_ITEM('color',(#292278),#32386); +#292278 = PRESENTATION_STYLE_ASSIGNMENT((#292279,#292284)); +#292279 = SURFACE_STYLE_USAGE(.BOTH.,#292280); +#292280 = SURFACE_SIDE_STYLE('',(#292281)); +#292281 = SURFACE_STYLE_FILL_AREA(#292282); +#292282 = FILL_AREA_STYLE('',(#292283)); +#292283 = FILL_AREA_STYLE_COLOUR('',#270350); +#292284 = CURVE_STYLE('',#292285,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292285 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292286 = OVER_RIDING_STYLED_ITEM('overriding color',(#292287),#32393, + #292277); +#292287 = PRESENTATION_STYLE_ASSIGNMENT((#292288,#292293)); +#292288 = SURFACE_STYLE_USAGE(.BOTH.,#292289); +#292289 = SURFACE_SIDE_STYLE('',(#292290)); +#292290 = SURFACE_STYLE_FILL_AREA(#292291); +#292291 = FILL_AREA_STYLE('',(#292292)); +#292292 = FILL_AREA_STYLE_COLOUR('',#285989); +#292293 = CURVE_STYLE('',#292294,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292294 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292295 = STYLED_ITEM('color',(#292296),#32403); +#292296 = PRESENTATION_STYLE_ASSIGNMENT((#292297,#292302)); +#292297 = SURFACE_STYLE_USAGE(.BOTH.,#292298); +#292298 = SURFACE_SIDE_STYLE('',(#292299)); +#292299 = SURFACE_STYLE_FILL_AREA(#292300); +#292300 = FILL_AREA_STYLE('',(#292301)); +#292301 = FILL_AREA_STYLE_COLOUR('',#270350); +#292302 = CURVE_STYLE('',#292303,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292303 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292304 = OVER_RIDING_STYLED_ITEM('overriding color',(#292305),#32408, + #292295); +#292305 = PRESENTATION_STYLE_ASSIGNMENT((#292306,#292311)); +#292306 = SURFACE_STYLE_USAGE(.BOTH.,#292307); +#292307 = SURFACE_SIDE_STYLE('',(#292308)); +#292308 = SURFACE_STYLE_FILL_AREA(#292309); +#292309 = FILL_AREA_STYLE('',(#292310)); +#292310 = FILL_AREA_STYLE_COLOUR('',#285989); +#292311 = CURVE_STYLE('',#292312,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292312 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292313 = STYLED_ITEM('color',(#292314),#32420); +#292314 = PRESENTATION_STYLE_ASSIGNMENT((#292315,#292320)); +#292315 = SURFACE_STYLE_USAGE(.BOTH.,#292316); +#292316 = SURFACE_SIDE_STYLE('',(#292317)); +#292317 = SURFACE_STYLE_FILL_AREA(#292318); +#292318 = FILL_AREA_STYLE('',(#292319)); +#292319 = FILL_AREA_STYLE_COLOUR('',#285989); +#292320 = CURVE_STYLE('',#292321,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292321 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292322 = STYLED_ITEM('color',(#292323),#32469); +#292323 = PRESENTATION_STYLE_ASSIGNMENT((#292324,#292329)); +#292324 = SURFACE_STYLE_USAGE(.BOTH.,#292325); +#292325 = SURFACE_SIDE_STYLE('',(#292326)); +#292326 = SURFACE_STYLE_FILL_AREA(#292327); +#292327 = FILL_AREA_STYLE('',(#292328)); +#292328 = FILL_AREA_STYLE_COLOUR('',#285989); +#292329 = CURVE_STYLE('',#292330,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292330 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292331 = STYLED_ITEM('color',(#292332),#32493); +#292332 = PRESENTATION_STYLE_ASSIGNMENT((#292333,#292338)); +#292333 = SURFACE_STYLE_USAGE(.BOTH.,#292334); +#292334 = SURFACE_SIDE_STYLE('',(#292335)); +#292335 = SURFACE_STYLE_FILL_AREA(#292336); +#292336 = FILL_AREA_STYLE('',(#292337)); +#292337 = FILL_AREA_STYLE_COLOUR('',#285989); +#292338 = CURVE_STYLE('',#292339,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292339 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292340 = STYLED_ITEM('color',(#292341),#32535); +#292341 = PRESENTATION_STYLE_ASSIGNMENT((#292342,#292347)); +#292342 = SURFACE_STYLE_USAGE(.BOTH.,#292343); +#292343 = SURFACE_SIDE_STYLE('',(#292344)); +#292344 = SURFACE_STYLE_FILL_AREA(#292345); +#292345 = FILL_AREA_STYLE('',(#292346)); +#292346 = FILL_AREA_STYLE_COLOUR('',#285989); +#292347 = CURVE_STYLE('',#292348,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292348 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292349 = STYLED_ITEM('color',(#292350),#32552); +#292350 = PRESENTATION_STYLE_ASSIGNMENT((#292351,#292356)); +#292351 = SURFACE_STYLE_USAGE(.BOTH.,#292352); +#292352 = SURFACE_SIDE_STYLE('',(#292353)); +#292353 = SURFACE_STYLE_FILL_AREA(#292354); +#292354 = FILL_AREA_STYLE('',(#292355)); +#292355 = FILL_AREA_STYLE_COLOUR('',#270350); +#292356 = CURVE_STYLE('',#292357,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292357 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292358 = OVER_RIDING_STYLED_ITEM('overriding color',(#292359),#32559, + #292349); +#292359 = PRESENTATION_STYLE_ASSIGNMENT((#292360,#292365)); +#292360 = SURFACE_STYLE_USAGE(.BOTH.,#292361); +#292361 = SURFACE_SIDE_STYLE('',(#292362)); +#292362 = SURFACE_STYLE_FILL_AREA(#292363); +#292363 = FILL_AREA_STYLE('',(#292364)); +#292364 = FILL_AREA_STYLE_COLOUR('',#285989); +#292365 = CURVE_STYLE('',#292366,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292366 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292367 = STYLED_ITEM('color',(#292368),#32569); +#292368 = PRESENTATION_STYLE_ASSIGNMENT((#292369,#292374)); +#292369 = SURFACE_STYLE_USAGE(.BOTH.,#292370); +#292370 = SURFACE_SIDE_STYLE('',(#292371)); +#292371 = SURFACE_STYLE_FILL_AREA(#292372); +#292372 = FILL_AREA_STYLE('',(#292373)); +#292373 = FILL_AREA_STYLE_COLOUR('',#270350); +#292374 = CURVE_STYLE('',#292375,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292375 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292376 = OVER_RIDING_STYLED_ITEM('overriding color',(#292377),#32574, + #292367); +#292377 = PRESENTATION_STYLE_ASSIGNMENT((#292378,#292383)); +#292378 = SURFACE_STYLE_USAGE(.BOTH.,#292379); +#292379 = SURFACE_SIDE_STYLE('',(#292380)); +#292380 = SURFACE_STYLE_FILL_AREA(#292381); +#292381 = FILL_AREA_STYLE('',(#292382)); +#292382 = FILL_AREA_STYLE_COLOUR('',#285989); +#292383 = CURVE_STYLE('',#292384,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292384 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292385 = STYLED_ITEM('color',(#292386),#32586); +#292386 = PRESENTATION_STYLE_ASSIGNMENT((#292387,#292392)); +#292387 = SURFACE_STYLE_USAGE(.BOTH.,#292388); +#292388 = SURFACE_SIDE_STYLE('',(#292389)); +#292389 = SURFACE_STYLE_FILL_AREA(#292390); +#292390 = FILL_AREA_STYLE('',(#292391)); +#292391 = FILL_AREA_STYLE_COLOUR('',#285989); +#292392 = CURVE_STYLE('',#292393,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292393 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292394 = STYLED_ITEM('color',(#292395),#32635); +#292395 = PRESENTATION_STYLE_ASSIGNMENT((#292396,#292401)); +#292396 = SURFACE_STYLE_USAGE(.BOTH.,#292397); +#292397 = SURFACE_SIDE_STYLE('',(#292398)); +#292398 = SURFACE_STYLE_FILL_AREA(#292399); +#292399 = FILL_AREA_STYLE('',(#292400)); +#292400 = FILL_AREA_STYLE_COLOUR('',#285989); +#292401 = CURVE_STYLE('',#292402,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292402 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292403 = STYLED_ITEM('color',(#292404),#32659); +#292404 = PRESENTATION_STYLE_ASSIGNMENT((#292405,#292410)); +#292405 = SURFACE_STYLE_USAGE(.BOTH.,#292406); +#292406 = SURFACE_SIDE_STYLE('',(#292407)); +#292407 = SURFACE_STYLE_FILL_AREA(#292408); +#292408 = FILL_AREA_STYLE('',(#292409)); +#292409 = FILL_AREA_STYLE_COLOUR('',#285989); +#292410 = CURVE_STYLE('',#292411,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292411 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292412 = STYLED_ITEM('color',(#292413),#32701); +#292413 = PRESENTATION_STYLE_ASSIGNMENT((#292414,#292419)); +#292414 = SURFACE_STYLE_USAGE(.BOTH.,#292415); +#292415 = SURFACE_SIDE_STYLE('',(#292416)); +#292416 = SURFACE_STYLE_FILL_AREA(#292417); +#292417 = FILL_AREA_STYLE('',(#292418)); +#292418 = FILL_AREA_STYLE_COLOUR('',#285989); +#292419 = CURVE_STYLE('',#292420,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292420 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292421 = STYLED_ITEM('color',(#292422),#32718); +#292422 = PRESENTATION_STYLE_ASSIGNMENT((#292423,#292428)); +#292423 = SURFACE_STYLE_USAGE(.BOTH.,#292424); +#292424 = SURFACE_SIDE_STYLE('',(#292425)); +#292425 = SURFACE_STYLE_FILL_AREA(#292426); +#292426 = FILL_AREA_STYLE('',(#292427)); +#292427 = FILL_AREA_STYLE_COLOUR('',#270350); +#292428 = CURVE_STYLE('',#292429,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292429 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292430 = OVER_RIDING_STYLED_ITEM('overriding color',(#292431),#32725, + #292421); +#292431 = PRESENTATION_STYLE_ASSIGNMENT((#292432,#292437)); +#292432 = SURFACE_STYLE_USAGE(.BOTH.,#292433); +#292433 = SURFACE_SIDE_STYLE('',(#292434)); +#292434 = SURFACE_STYLE_FILL_AREA(#292435); +#292435 = FILL_AREA_STYLE('',(#292436)); +#292436 = FILL_AREA_STYLE_COLOUR('',#285989); +#292437 = CURVE_STYLE('',#292438,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292438 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292439 = STYLED_ITEM('color',(#292440),#32735); +#292440 = PRESENTATION_STYLE_ASSIGNMENT((#292441,#292446)); +#292441 = SURFACE_STYLE_USAGE(.BOTH.,#292442); +#292442 = SURFACE_SIDE_STYLE('',(#292443)); +#292443 = SURFACE_STYLE_FILL_AREA(#292444); +#292444 = FILL_AREA_STYLE('',(#292445)); +#292445 = FILL_AREA_STYLE_COLOUR('',#270350); +#292446 = CURVE_STYLE('',#292447,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292447 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292448 = OVER_RIDING_STYLED_ITEM('overriding color',(#292449),#32740, + #292439); +#292449 = PRESENTATION_STYLE_ASSIGNMENT((#292450,#292455)); +#292450 = SURFACE_STYLE_USAGE(.BOTH.,#292451); +#292451 = SURFACE_SIDE_STYLE('',(#292452)); +#292452 = SURFACE_STYLE_FILL_AREA(#292453); +#292453 = FILL_AREA_STYLE('',(#292454)); +#292454 = FILL_AREA_STYLE_COLOUR('',#285989); +#292455 = CURVE_STYLE('',#292456,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292456 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292457 = STYLED_ITEM('color',(#292458),#32752); +#292458 = PRESENTATION_STYLE_ASSIGNMENT((#292459,#292464)); +#292459 = SURFACE_STYLE_USAGE(.BOTH.,#292460); +#292460 = SURFACE_SIDE_STYLE('',(#292461)); +#292461 = SURFACE_STYLE_FILL_AREA(#292462); +#292462 = FILL_AREA_STYLE('',(#292463)); +#292463 = FILL_AREA_STYLE_COLOUR('',#285989); +#292464 = CURVE_STYLE('',#292465,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292465 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292466 = STYLED_ITEM('color',(#292467),#32801); +#292467 = PRESENTATION_STYLE_ASSIGNMENT((#292468,#292473)); +#292468 = SURFACE_STYLE_USAGE(.BOTH.,#292469); +#292469 = SURFACE_SIDE_STYLE('',(#292470)); +#292470 = SURFACE_STYLE_FILL_AREA(#292471); +#292471 = FILL_AREA_STYLE('',(#292472)); +#292472 = FILL_AREA_STYLE_COLOUR('',#285989); +#292473 = CURVE_STYLE('',#292474,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292474 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292475 = STYLED_ITEM('color',(#292476),#32825); +#292476 = PRESENTATION_STYLE_ASSIGNMENT((#292477,#292482)); +#292477 = SURFACE_STYLE_USAGE(.BOTH.,#292478); +#292478 = SURFACE_SIDE_STYLE('',(#292479)); +#292479 = SURFACE_STYLE_FILL_AREA(#292480); +#292480 = FILL_AREA_STYLE('',(#292481)); +#292481 = FILL_AREA_STYLE_COLOUR('',#285989); +#292482 = CURVE_STYLE('',#292483,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292483 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292484 = STYLED_ITEM('color',(#292485),#32867); +#292485 = PRESENTATION_STYLE_ASSIGNMENT((#292486,#292491)); +#292486 = SURFACE_STYLE_USAGE(.BOTH.,#292487); +#292487 = SURFACE_SIDE_STYLE('',(#292488)); +#292488 = SURFACE_STYLE_FILL_AREA(#292489); +#292489 = FILL_AREA_STYLE('',(#292490)); +#292490 = FILL_AREA_STYLE_COLOUR('',#285989); +#292491 = CURVE_STYLE('',#292492,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292492 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292493 = STYLED_ITEM('color',(#292494),#32884); +#292494 = PRESENTATION_STYLE_ASSIGNMENT((#292495,#292500)); +#292495 = SURFACE_STYLE_USAGE(.BOTH.,#292496); +#292496 = SURFACE_SIDE_STYLE('',(#292497)); +#292497 = SURFACE_STYLE_FILL_AREA(#292498); +#292498 = FILL_AREA_STYLE('',(#292499)); +#292499 = FILL_AREA_STYLE_COLOUR('',#270350); +#292500 = CURVE_STYLE('',#292501,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292501 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292502 = OVER_RIDING_STYLED_ITEM('overriding color',(#292503),#32891, + #292493); +#292503 = PRESENTATION_STYLE_ASSIGNMENT((#292504,#292509)); +#292504 = SURFACE_STYLE_USAGE(.BOTH.,#292505); +#292505 = SURFACE_SIDE_STYLE('',(#292506)); +#292506 = SURFACE_STYLE_FILL_AREA(#292507); +#292507 = FILL_AREA_STYLE('',(#292508)); +#292508 = FILL_AREA_STYLE_COLOUR('',#285989); +#292509 = CURVE_STYLE('',#292510,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292510 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292511 = STYLED_ITEM('color',(#292512),#32901); +#292512 = PRESENTATION_STYLE_ASSIGNMENT((#292513,#292518)); +#292513 = SURFACE_STYLE_USAGE(.BOTH.,#292514); +#292514 = SURFACE_SIDE_STYLE('',(#292515)); +#292515 = SURFACE_STYLE_FILL_AREA(#292516); +#292516 = FILL_AREA_STYLE('',(#292517)); +#292517 = FILL_AREA_STYLE_COLOUR('',#270350); +#292518 = CURVE_STYLE('',#292519,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292519 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292520 = OVER_RIDING_STYLED_ITEM('overriding color',(#292521),#32906, + #292511); +#292521 = PRESENTATION_STYLE_ASSIGNMENT((#292522,#292527)); +#292522 = SURFACE_STYLE_USAGE(.BOTH.,#292523); +#292523 = SURFACE_SIDE_STYLE('',(#292524)); +#292524 = SURFACE_STYLE_FILL_AREA(#292525); +#292525 = FILL_AREA_STYLE('',(#292526)); +#292526 = FILL_AREA_STYLE_COLOUR('',#285989); +#292527 = CURVE_STYLE('',#292528,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292528 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292529 = STYLED_ITEM('color',(#292530),#32918); +#292530 = PRESENTATION_STYLE_ASSIGNMENT((#292531,#292536)); +#292531 = SURFACE_STYLE_USAGE(.BOTH.,#292532); +#292532 = SURFACE_SIDE_STYLE('',(#292533)); +#292533 = SURFACE_STYLE_FILL_AREA(#292534); +#292534 = FILL_AREA_STYLE('',(#292535)); +#292535 = FILL_AREA_STYLE_COLOUR('',#285989); +#292536 = CURVE_STYLE('',#292537,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292537 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292538 = STYLED_ITEM('color',(#292539),#32967); +#292539 = PRESENTATION_STYLE_ASSIGNMENT((#292540,#292545)); +#292540 = SURFACE_STYLE_USAGE(.BOTH.,#292541); +#292541 = SURFACE_SIDE_STYLE('',(#292542)); +#292542 = SURFACE_STYLE_FILL_AREA(#292543); +#292543 = FILL_AREA_STYLE('',(#292544)); +#292544 = FILL_AREA_STYLE_COLOUR('',#285989); +#292545 = CURVE_STYLE('',#292546,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292546 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292547 = STYLED_ITEM('color',(#292548),#32991); +#292548 = PRESENTATION_STYLE_ASSIGNMENT((#292549,#292554)); +#292549 = SURFACE_STYLE_USAGE(.BOTH.,#292550); +#292550 = SURFACE_SIDE_STYLE('',(#292551)); +#292551 = SURFACE_STYLE_FILL_AREA(#292552); +#292552 = FILL_AREA_STYLE('',(#292553)); +#292553 = FILL_AREA_STYLE_COLOUR('',#285989); +#292554 = CURVE_STYLE('',#292555,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292555 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292556 = STYLED_ITEM('color',(#292557),#33033); +#292557 = PRESENTATION_STYLE_ASSIGNMENT((#292558,#292563)); +#292558 = SURFACE_STYLE_USAGE(.BOTH.,#292559); +#292559 = SURFACE_SIDE_STYLE('',(#292560)); +#292560 = SURFACE_STYLE_FILL_AREA(#292561); +#292561 = FILL_AREA_STYLE('',(#292562)); +#292562 = FILL_AREA_STYLE_COLOUR('',#285989); +#292563 = CURVE_STYLE('',#292564,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292564 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292565 = STYLED_ITEM('color',(#292566),#33050); +#292566 = PRESENTATION_STYLE_ASSIGNMENT((#292567,#292572)); +#292567 = SURFACE_STYLE_USAGE(.BOTH.,#292568); +#292568 = SURFACE_SIDE_STYLE('',(#292569)); +#292569 = SURFACE_STYLE_FILL_AREA(#292570); +#292570 = FILL_AREA_STYLE('',(#292571)); +#292571 = FILL_AREA_STYLE_COLOUR('',#270350); +#292572 = CURVE_STYLE('',#292573,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292573 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292574 = OVER_RIDING_STYLED_ITEM('overriding color',(#292575),#33057, + #292565); +#292575 = PRESENTATION_STYLE_ASSIGNMENT((#292576,#292581)); +#292576 = SURFACE_STYLE_USAGE(.BOTH.,#292577); +#292577 = SURFACE_SIDE_STYLE('',(#292578)); +#292578 = SURFACE_STYLE_FILL_AREA(#292579); +#292579 = FILL_AREA_STYLE('',(#292580)); +#292580 = FILL_AREA_STYLE_COLOUR('',#285989); +#292581 = CURVE_STYLE('',#292582,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292582 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292583 = STYLED_ITEM('color',(#292584),#33067); +#292584 = PRESENTATION_STYLE_ASSIGNMENT((#292585,#292590)); +#292585 = SURFACE_STYLE_USAGE(.BOTH.,#292586); +#292586 = SURFACE_SIDE_STYLE('',(#292587)); +#292587 = SURFACE_STYLE_FILL_AREA(#292588); +#292588 = FILL_AREA_STYLE('',(#292589)); +#292589 = FILL_AREA_STYLE_COLOUR('',#270350); +#292590 = CURVE_STYLE('',#292591,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292591 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292592 = OVER_RIDING_STYLED_ITEM('overriding color',(#292593),#33072, + #292583); +#292593 = PRESENTATION_STYLE_ASSIGNMENT((#292594,#292599)); +#292594 = SURFACE_STYLE_USAGE(.BOTH.,#292595); +#292595 = SURFACE_SIDE_STYLE('',(#292596)); +#292596 = SURFACE_STYLE_FILL_AREA(#292597); +#292597 = FILL_AREA_STYLE('',(#292598)); +#292598 = FILL_AREA_STYLE_COLOUR('',#285989); +#292599 = CURVE_STYLE('',#292600,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292600 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292601 = STYLED_ITEM('color',(#292602),#33084); +#292602 = PRESENTATION_STYLE_ASSIGNMENT((#292603,#292608)); +#292603 = SURFACE_STYLE_USAGE(.BOTH.,#292604); +#292604 = SURFACE_SIDE_STYLE('',(#292605)); +#292605 = SURFACE_STYLE_FILL_AREA(#292606); +#292606 = FILL_AREA_STYLE('',(#292607)); +#292607 = FILL_AREA_STYLE_COLOUR('',#285989); +#292608 = CURVE_STYLE('',#292609,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292609 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292610 = STYLED_ITEM('color',(#292611),#33133); +#292611 = PRESENTATION_STYLE_ASSIGNMENT((#292612,#292617)); +#292612 = SURFACE_STYLE_USAGE(.BOTH.,#292613); +#292613 = SURFACE_SIDE_STYLE('',(#292614)); +#292614 = SURFACE_STYLE_FILL_AREA(#292615); +#292615 = FILL_AREA_STYLE('',(#292616)); +#292616 = FILL_AREA_STYLE_COLOUR('',#285989); +#292617 = CURVE_STYLE('',#292618,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292618 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292619 = STYLED_ITEM('color',(#292620),#33157); +#292620 = PRESENTATION_STYLE_ASSIGNMENT((#292621,#292626)); +#292621 = SURFACE_STYLE_USAGE(.BOTH.,#292622); +#292622 = SURFACE_SIDE_STYLE('',(#292623)); +#292623 = SURFACE_STYLE_FILL_AREA(#292624); +#292624 = FILL_AREA_STYLE('',(#292625)); +#292625 = FILL_AREA_STYLE_COLOUR('',#285989); +#292626 = CURVE_STYLE('',#292627,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292627 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292628 = STYLED_ITEM('color',(#292629),#33199); +#292629 = PRESENTATION_STYLE_ASSIGNMENT((#292630,#292635)); +#292630 = SURFACE_STYLE_USAGE(.BOTH.,#292631); +#292631 = SURFACE_SIDE_STYLE('',(#292632)); +#292632 = SURFACE_STYLE_FILL_AREA(#292633); +#292633 = FILL_AREA_STYLE('',(#292634)); +#292634 = FILL_AREA_STYLE_COLOUR('',#285989); +#292635 = CURVE_STYLE('',#292636,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292636 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292637 = STYLED_ITEM('color',(#292638),#33216); +#292638 = PRESENTATION_STYLE_ASSIGNMENT((#292639,#292644)); +#292639 = SURFACE_STYLE_USAGE(.BOTH.,#292640); +#292640 = SURFACE_SIDE_STYLE('',(#292641)); +#292641 = SURFACE_STYLE_FILL_AREA(#292642); +#292642 = FILL_AREA_STYLE('',(#292643)); +#292643 = FILL_AREA_STYLE_COLOUR('',#270350); +#292644 = CURVE_STYLE('',#292645,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292645 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292646 = OVER_RIDING_STYLED_ITEM('overriding color',(#292647),#33223, + #292637); +#292647 = PRESENTATION_STYLE_ASSIGNMENT((#292648,#292653)); +#292648 = SURFACE_STYLE_USAGE(.BOTH.,#292649); +#292649 = SURFACE_SIDE_STYLE('',(#292650)); +#292650 = SURFACE_STYLE_FILL_AREA(#292651); +#292651 = FILL_AREA_STYLE('',(#292652)); +#292652 = FILL_AREA_STYLE_COLOUR('',#285989); +#292653 = CURVE_STYLE('',#292654,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292654 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292655 = STYLED_ITEM('color',(#292656),#33233); +#292656 = PRESENTATION_STYLE_ASSIGNMENT((#292657,#292662)); +#292657 = SURFACE_STYLE_USAGE(.BOTH.,#292658); +#292658 = SURFACE_SIDE_STYLE('',(#292659)); +#292659 = SURFACE_STYLE_FILL_AREA(#292660); +#292660 = FILL_AREA_STYLE('',(#292661)); +#292661 = FILL_AREA_STYLE_COLOUR('',#270350); +#292662 = CURVE_STYLE('',#292663,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292663 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292664 = OVER_RIDING_STYLED_ITEM('overriding color',(#292665),#33238, + #292655); +#292665 = PRESENTATION_STYLE_ASSIGNMENT((#292666,#292671)); +#292666 = SURFACE_STYLE_USAGE(.BOTH.,#292667); +#292667 = SURFACE_SIDE_STYLE('',(#292668)); +#292668 = SURFACE_STYLE_FILL_AREA(#292669); +#292669 = FILL_AREA_STYLE('',(#292670)); +#292670 = FILL_AREA_STYLE_COLOUR('',#285989); +#292671 = CURVE_STYLE('',#292672,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292672 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292673 = STYLED_ITEM('color',(#292674),#33250); +#292674 = PRESENTATION_STYLE_ASSIGNMENT((#292675,#292680)); +#292675 = SURFACE_STYLE_USAGE(.BOTH.,#292676); +#292676 = SURFACE_SIDE_STYLE('',(#292677)); +#292677 = SURFACE_STYLE_FILL_AREA(#292678); +#292678 = FILL_AREA_STYLE('',(#292679)); +#292679 = FILL_AREA_STYLE_COLOUR('',#285989); +#292680 = CURVE_STYLE('',#292681,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292681 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292682 = STYLED_ITEM('color',(#292683),#33299); +#292683 = PRESENTATION_STYLE_ASSIGNMENT((#292684,#292689)); +#292684 = SURFACE_STYLE_USAGE(.BOTH.,#292685); +#292685 = SURFACE_SIDE_STYLE('',(#292686)); +#292686 = SURFACE_STYLE_FILL_AREA(#292687); +#292687 = FILL_AREA_STYLE('',(#292688)); +#292688 = FILL_AREA_STYLE_COLOUR('',#285989); +#292689 = CURVE_STYLE('',#292690,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292690 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292691 = STYLED_ITEM('color',(#292692),#33323); +#292692 = PRESENTATION_STYLE_ASSIGNMENT((#292693,#292698)); +#292693 = SURFACE_STYLE_USAGE(.BOTH.,#292694); +#292694 = SURFACE_SIDE_STYLE('',(#292695)); +#292695 = SURFACE_STYLE_FILL_AREA(#292696); +#292696 = FILL_AREA_STYLE('',(#292697)); +#292697 = FILL_AREA_STYLE_COLOUR('',#285989); +#292698 = CURVE_STYLE('',#292699,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292699 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292700 = STYLED_ITEM('color',(#292701),#33365); +#292701 = PRESENTATION_STYLE_ASSIGNMENT((#292702,#292707)); +#292702 = SURFACE_STYLE_USAGE(.BOTH.,#292703); +#292703 = SURFACE_SIDE_STYLE('',(#292704)); +#292704 = SURFACE_STYLE_FILL_AREA(#292705); +#292705 = FILL_AREA_STYLE('',(#292706)); +#292706 = FILL_AREA_STYLE_COLOUR('',#285989); +#292707 = CURVE_STYLE('',#292708,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292708 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292709 = STYLED_ITEM('color',(#292710),#33382); +#292710 = PRESENTATION_STYLE_ASSIGNMENT((#292711,#292716)); +#292711 = SURFACE_STYLE_USAGE(.BOTH.,#292712); +#292712 = SURFACE_SIDE_STYLE('',(#292713)); +#292713 = SURFACE_STYLE_FILL_AREA(#292714); +#292714 = FILL_AREA_STYLE('',(#292715)); +#292715 = FILL_AREA_STYLE_COLOUR('',#270350); +#292716 = CURVE_STYLE('',#292717,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292717 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292718 = OVER_RIDING_STYLED_ITEM('overriding color',(#292719),#33389, + #292709); +#292719 = PRESENTATION_STYLE_ASSIGNMENT((#292720,#292725)); +#292720 = SURFACE_STYLE_USAGE(.BOTH.,#292721); +#292721 = SURFACE_SIDE_STYLE('',(#292722)); +#292722 = SURFACE_STYLE_FILL_AREA(#292723); +#292723 = FILL_AREA_STYLE('',(#292724)); +#292724 = FILL_AREA_STYLE_COLOUR('',#285989); +#292725 = CURVE_STYLE('',#292726,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292726 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292727 = STYLED_ITEM('color',(#292728),#33399); +#292728 = PRESENTATION_STYLE_ASSIGNMENT((#292729,#292734)); +#292729 = SURFACE_STYLE_USAGE(.BOTH.,#292730); +#292730 = SURFACE_SIDE_STYLE('',(#292731)); +#292731 = SURFACE_STYLE_FILL_AREA(#292732); +#292732 = FILL_AREA_STYLE('',(#292733)); +#292733 = FILL_AREA_STYLE_COLOUR('',#270350); +#292734 = CURVE_STYLE('',#292735,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292735 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292736 = OVER_RIDING_STYLED_ITEM('overriding color',(#292737),#33404, + #292727); +#292737 = PRESENTATION_STYLE_ASSIGNMENT((#292738,#292743)); +#292738 = SURFACE_STYLE_USAGE(.BOTH.,#292739); +#292739 = SURFACE_SIDE_STYLE('',(#292740)); +#292740 = SURFACE_STYLE_FILL_AREA(#292741); +#292741 = FILL_AREA_STYLE('',(#292742)); +#292742 = FILL_AREA_STYLE_COLOUR('',#285989); +#292743 = CURVE_STYLE('',#292744,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292744 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292745 = STYLED_ITEM('color',(#292746),#33416); +#292746 = PRESENTATION_STYLE_ASSIGNMENT((#292747,#292752)); +#292747 = SURFACE_STYLE_USAGE(.BOTH.,#292748); +#292748 = SURFACE_SIDE_STYLE('',(#292749)); +#292749 = SURFACE_STYLE_FILL_AREA(#292750); +#292750 = FILL_AREA_STYLE('',(#292751)); +#292751 = FILL_AREA_STYLE_COLOUR('',#285989); +#292752 = CURVE_STYLE('',#292753,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292753 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292754 = STYLED_ITEM('color',(#292755),#33465); +#292755 = PRESENTATION_STYLE_ASSIGNMENT((#292756,#292761)); +#292756 = SURFACE_STYLE_USAGE(.BOTH.,#292757); +#292757 = SURFACE_SIDE_STYLE('',(#292758)); +#292758 = SURFACE_STYLE_FILL_AREA(#292759); +#292759 = FILL_AREA_STYLE('',(#292760)); +#292760 = FILL_AREA_STYLE_COLOUR('',#285989); +#292761 = CURVE_STYLE('',#292762,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292762 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292763 = STYLED_ITEM('color',(#292764),#33489); +#292764 = PRESENTATION_STYLE_ASSIGNMENT((#292765,#292770)); +#292765 = SURFACE_STYLE_USAGE(.BOTH.,#292766); +#292766 = SURFACE_SIDE_STYLE('',(#292767)); +#292767 = SURFACE_STYLE_FILL_AREA(#292768); +#292768 = FILL_AREA_STYLE('',(#292769)); +#292769 = FILL_AREA_STYLE_COLOUR('',#285989); +#292770 = CURVE_STYLE('',#292771,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292771 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292772 = STYLED_ITEM('color',(#292773),#33531); +#292773 = PRESENTATION_STYLE_ASSIGNMENT((#292774,#292779)); +#292774 = SURFACE_STYLE_USAGE(.BOTH.,#292775); +#292775 = SURFACE_SIDE_STYLE('',(#292776)); +#292776 = SURFACE_STYLE_FILL_AREA(#292777); +#292777 = FILL_AREA_STYLE('',(#292778)); +#292778 = FILL_AREA_STYLE_COLOUR('',#285989); +#292779 = CURVE_STYLE('',#292780,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292780 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292781 = STYLED_ITEM('color',(#292782),#33548); +#292782 = PRESENTATION_STYLE_ASSIGNMENT((#292783,#292788)); +#292783 = SURFACE_STYLE_USAGE(.BOTH.,#292784); +#292784 = SURFACE_SIDE_STYLE('',(#292785)); +#292785 = SURFACE_STYLE_FILL_AREA(#292786); +#292786 = FILL_AREA_STYLE('',(#292787)); +#292787 = FILL_AREA_STYLE_COLOUR('',#270350); +#292788 = CURVE_STYLE('',#292789,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292789 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292790 = OVER_RIDING_STYLED_ITEM('overriding color',(#292791),#33555, + #292781); +#292791 = PRESENTATION_STYLE_ASSIGNMENT((#292792,#292797)); +#292792 = SURFACE_STYLE_USAGE(.BOTH.,#292793); +#292793 = SURFACE_SIDE_STYLE('',(#292794)); +#292794 = SURFACE_STYLE_FILL_AREA(#292795); +#292795 = FILL_AREA_STYLE('',(#292796)); +#292796 = FILL_AREA_STYLE_COLOUR('',#285989); +#292797 = CURVE_STYLE('',#292798,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292798 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292799 = STYLED_ITEM('color',(#292800),#33565); +#292800 = PRESENTATION_STYLE_ASSIGNMENT((#292801,#292806)); +#292801 = SURFACE_STYLE_USAGE(.BOTH.,#292802); +#292802 = SURFACE_SIDE_STYLE('',(#292803)); +#292803 = SURFACE_STYLE_FILL_AREA(#292804); +#292804 = FILL_AREA_STYLE('',(#292805)); +#292805 = FILL_AREA_STYLE_COLOUR('',#270350); +#292806 = CURVE_STYLE('',#292807,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292807 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292808 = OVER_RIDING_STYLED_ITEM('overriding color',(#292809),#33570, + #292799); +#292809 = PRESENTATION_STYLE_ASSIGNMENT((#292810,#292815)); +#292810 = SURFACE_STYLE_USAGE(.BOTH.,#292811); +#292811 = SURFACE_SIDE_STYLE('',(#292812)); +#292812 = SURFACE_STYLE_FILL_AREA(#292813); +#292813 = FILL_AREA_STYLE('',(#292814)); +#292814 = FILL_AREA_STYLE_COLOUR('',#285989); +#292815 = CURVE_STYLE('',#292816,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292816 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292817 = STYLED_ITEM('color',(#292818),#33582); +#292818 = PRESENTATION_STYLE_ASSIGNMENT((#292819,#292824)); +#292819 = SURFACE_STYLE_USAGE(.BOTH.,#292820); +#292820 = SURFACE_SIDE_STYLE('',(#292821)); +#292821 = SURFACE_STYLE_FILL_AREA(#292822); +#292822 = FILL_AREA_STYLE('',(#292823)); +#292823 = FILL_AREA_STYLE_COLOUR('',#285989); +#292824 = CURVE_STYLE('',#292825,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292825 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292826 = STYLED_ITEM('color',(#292827),#33631); +#292827 = PRESENTATION_STYLE_ASSIGNMENT((#292828,#292833)); +#292828 = SURFACE_STYLE_USAGE(.BOTH.,#292829); +#292829 = SURFACE_SIDE_STYLE('',(#292830)); +#292830 = SURFACE_STYLE_FILL_AREA(#292831); +#292831 = FILL_AREA_STYLE('',(#292832)); +#292832 = FILL_AREA_STYLE_COLOUR('',#285989); +#292833 = CURVE_STYLE('',#292834,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292834 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292835 = STYLED_ITEM('color',(#292836),#33655); +#292836 = PRESENTATION_STYLE_ASSIGNMENT((#292837,#292842)); +#292837 = SURFACE_STYLE_USAGE(.BOTH.,#292838); +#292838 = SURFACE_SIDE_STYLE('',(#292839)); +#292839 = SURFACE_STYLE_FILL_AREA(#292840); +#292840 = FILL_AREA_STYLE('',(#292841)); +#292841 = FILL_AREA_STYLE_COLOUR('',#285989); +#292842 = CURVE_STYLE('',#292843,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292843 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292844 = STYLED_ITEM('color',(#292845),#33697); +#292845 = PRESENTATION_STYLE_ASSIGNMENT((#292846,#292851)); +#292846 = SURFACE_STYLE_USAGE(.BOTH.,#292847); +#292847 = SURFACE_SIDE_STYLE('',(#292848)); +#292848 = SURFACE_STYLE_FILL_AREA(#292849); +#292849 = FILL_AREA_STYLE('',(#292850)); +#292850 = FILL_AREA_STYLE_COLOUR('',#285989); +#292851 = CURVE_STYLE('',#292852,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292852 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292853 = STYLED_ITEM('color',(#292854),#33714); +#292854 = PRESENTATION_STYLE_ASSIGNMENT((#292855,#292860)); +#292855 = SURFACE_STYLE_USAGE(.BOTH.,#292856); +#292856 = SURFACE_SIDE_STYLE('',(#292857)); +#292857 = SURFACE_STYLE_FILL_AREA(#292858); +#292858 = FILL_AREA_STYLE('',(#292859)); +#292859 = FILL_AREA_STYLE_COLOUR('',#270350); +#292860 = CURVE_STYLE('',#292861,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292861 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292862 = OVER_RIDING_STYLED_ITEM('overriding color',(#292863),#33721, + #292853); +#292863 = PRESENTATION_STYLE_ASSIGNMENT((#292864,#292869)); +#292864 = SURFACE_STYLE_USAGE(.BOTH.,#292865); +#292865 = SURFACE_SIDE_STYLE('',(#292866)); +#292866 = SURFACE_STYLE_FILL_AREA(#292867); +#292867 = FILL_AREA_STYLE('',(#292868)); +#292868 = FILL_AREA_STYLE_COLOUR('',#285989); +#292869 = CURVE_STYLE('',#292870,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292870 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292871 = STYLED_ITEM('color',(#292872),#33731); +#292872 = PRESENTATION_STYLE_ASSIGNMENT((#292873,#292878)); +#292873 = SURFACE_STYLE_USAGE(.BOTH.,#292874); +#292874 = SURFACE_SIDE_STYLE('',(#292875)); +#292875 = SURFACE_STYLE_FILL_AREA(#292876); +#292876 = FILL_AREA_STYLE('',(#292877)); +#292877 = FILL_AREA_STYLE_COLOUR('',#270350); +#292878 = CURVE_STYLE('',#292879,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292879 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292880 = OVER_RIDING_STYLED_ITEM('overriding color',(#292881),#33736, + #292871); +#292881 = PRESENTATION_STYLE_ASSIGNMENT((#292882,#292887)); +#292882 = SURFACE_STYLE_USAGE(.BOTH.,#292883); +#292883 = SURFACE_SIDE_STYLE('',(#292884)); +#292884 = SURFACE_STYLE_FILL_AREA(#292885); +#292885 = FILL_AREA_STYLE('',(#292886)); +#292886 = FILL_AREA_STYLE_COLOUR('',#285989); +#292887 = CURVE_STYLE('',#292888,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292888 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292889 = STYLED_ITEM('color',(#292890),#33748); +#292890 = PRESENTATION_STYLE_ASSIGNMENT((#292891,#292896)); +#292891 = SURFACE_STYLE_USAGE(.BOTH.,#292892); +#292892 = SURFACE_SIDE_STYLE('',(#292893)); +#292893 = SURFACE_STYLE_FILL_AREA(#292894); +#292894 = FILL_AREA_STYLE('',(#292895)); +#292895 = FILL_AREA_STYLE_COLOUR('',#285989); +#292896 = CURVE_STYLE('',#292897,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292897 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292898 = STYLED_ITEM('color',(#292899),#33797); +#292899 = PRESENTATION_STYLE_ASSIGNMENT((#292900,#292905)); +#292900 = SURFACE_STYLE_USAGE(.BOTH.,#292901); +#292901 = SURFACE_SIDE_STYLE('',(#292902)); +#292902 = SURFACE_STYLE_FILL_AREA(#292903); +#292903 = FILL_AREA_STYLE('',(#292904)); +#292904 = FILL_AREA_STYLE_COLOUR('',#285989); +#292905 = CURVE_STYLE('',#292906,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292906 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292907 = STYLED_ITEM('color',(#292908),#33821); +#292908 = PRESENTATION_STYLE_ASSIGNMENT((#292909,#292914)); +#292909 = SURFACE_STYLE_USAGE(.BOTH.,#292910); +#292910 = SURFACE_SIDE_STYLE('',(#292911)); +#292911 = SURFACE_STYLE_FILL_AREA(#292912); +#292912 = FILL_AREA_STYLE('',(#292913)); +#292913 = FILL_AREA_STYLE_COLOUR('',#285989); +#292914 = CURVE_STYLE('',#292915,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292915 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292916 = STYLED_ITEM('color',(#292917),#33863); +#292917 = PRESENTATION_STYLE_ASSIGNMENT((#292918,#292923)); +#292918 = SURFACE_STYLE_USAGE(.BOTH.,#292919); +#292919 = SURFACE_SIDE_STYLE('',(#292920)); +#292920 = SURFACE_STYLE_FILL_AREA(#292921); +#292921 = FILL_AREA_STYLE('',(#292922)); +#292922 = FILL_AREA_STYLE_COLOUR('',#285989); +#292923 = CURVE_STYLE('',#292924,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292924 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292925 = STYLED_ITEM('color',(#292926),#33880); +#292926 = PRESENTATION_STYLE_ASSIGNMENT((#292927,#292932)); +#292927 = SURFACE_STYLE_USAGE(.BOTH.,#292928); +#292928 = SURFACE_SIDE_STYLE('',(#292929)); +#292929 = SURFACE_STYLE_FILL_AREA(#292930); +#292930 = FILL_AREA_STYLE('',(#292931)); +#292931 = FILL_AREA_STYLE_COLOUR('',#270350); +#292932 = CURVE_STYLE('',#292933,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292933 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292934 = OVER_RIDING_STYLED_ITEM('overriding color',(#292935),#33887, + #292925); +#292935 = PRESENTATION_STYLE_ASSIGNMENT((#292936,#292941)); +#292936 = SURFACE_STYLE_USAGE(.BOTH.,#292937); +#292937 = SURFACE_SIDE_STYLE('',(#292938)); +#292938 = SURFACE_STYLE_FILL_AREA(#292939); +#292939 = FILL_AREA_STYLE('',(#292940)); +#292940 = FILL_AREA_STYLE_COLOUR('',#285989); +#292941 = CURVE_STYLE('',#292942,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292942 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292943 = STYLED_ITEM('color',(#292944),#33897); +#292944 = PRESENTATION_STYLE_ASSIGNMENT((#292945,#292950)); +#292945 = SURFACE_STYLE_USAGE(.BOTH.,#292946); +#292946 = SURFACE_SIDE_STYLE('',(#292947)); +#292947 = SURFACE_STYLE_FILL_AREA(#292948); +#292948 = FILL_AREA_STYLE('',(#292949)); +#292949 = FILL_AREA_STYLE_COLOUR('',#270350); +#292950 = CURVE_STYLE('',#292951,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#292951 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292952 = OVER_RIDING_STYLED_ITEM('overriding color',(#292953),#33902, + #292943); +#292953 = PRESENTATION_STYLE_ASSIGNMENT((#292954,#292959)); +#292954 = SURFACE_STYLE_USAGE(.BOTH.,#292955); +#292955 = SURFACE_SIDE_STYLE('',(#292956)); +#292956 = SURFACE_STYLE_FILL_AREA(#292957); +#292957 = FILL_AREA_STYLE('',(#292958)); +#292958 = FILL_AREA_STYLE_COLOUR('',#285989); +#292959 = CURVE_STYLE('',#292960,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292960 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292961 = STYLED_ITEM('color',(#292962),#33914); +#292962 = PRESENTATION_STYLE_ASSIGNMENT((#292963,#292968)); +#292963 = SURFACE_STYLE_USAGE(.BOTH.,#292964); +#292964 = SURFACE_SIDE_STYLE('',(#292965)); +#292965 = SURFACE_STYLE_FILL_AREA(#292966); +#292966 = FILL_AREA_STYLE('',(#292967)); +#292967 = FILL_AREA_STYLE_COLOUR('',#285989); +#292968 = CURVE_STYLE('',#292969,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292969 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292970 = STYLED_ITEM('color',(#292971),#33963); +#292971 = PRESENTATION_STYLE_ASSIGNMENT((#292972,#292977)); +#292972 = SURFACE_STYLE_USAGE(.BOTH.,#292973); +#292973 = SURFACE_SIDE_STYLE('',(#292974)); +#292974 = SURFACE_STYLE_FILL_AREA(#292975); +#292975 = FILL_AREA_STYLE('',(#292976)); +#292976 = FILL_AREA_STYLE_COLOUR('',#285989); +#292977 = CURVE_STYLE('',#292978,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292978 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292979 = STYLED_ITEM('color',(#292980),#33987); +#292980 = PRESENTATION_STYLE_ASSIGNMENT((#292981,#292986)); +#292981 = SURFACE_STYLE_USAGE(.BOTH.,#292982); +#292982 = SURFACE_SIDE_STYLE('',(#292983)); +#292983 = SURFACE_STYLE_FILL_AREA(#292984); +#292984 = FILL_AREA_STYLE('',(#292985)); +#292985 = FILL_AREA_STYLE_COLOUR('',#285989); +#292986 = CURVE_STYLE('',#292987,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292987 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292988 = STYLED_ITEM('color',(#292989),#34029); +#292989 = PRESENTATION_STYLE_ASSIGNMENT((#292990,#292995)); +#292990 = SURFACE_STYLE_USAGE(.BOTH.,#292991); +#292991 = SURFACE_SIDE_STYLE('',(#292992)); +#292992 = SURFACE_STYLE_FILL_AREA(#292993); +#292993 = FILL_AREA_STYLE('',(#292994)); +#292994 = FILL_AREA_STYLE_COLOUR('',#285989); +#292995 = CURVE_STYLE('',#292996,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#292996 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#292997 = STYLED_ITEM('color',(#292998),#34046); +#292998 = PRESENTATION_STYLE_ASSIGNMENT((#292999,#293004)); +#292999 = SURFACE_STYLE_USAGE(.BOTH.,#293000); +#293000 = SURFACE_SIDE_STYLE('',(#293001)); +#293001 = SURFACE_STYLE_FILL_AREA(#293002); +#293002 = FILL_AREA_STYLE('',(#293003)); +#293003 = FILL_AREA_STYLE_COLOUR('',#270350); +#293004 = CURVE_STYLE('',#293005,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293005 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293006 = OVER_RIDING_STYLED_ITEM('overriding color',(#293007),#34053, + #292997); +#293007 = PRESENTATION_STYLE_ASSIGNMENT((#293008,#293013)); +#293008 = SURFACE_STYLE_USAGE(.BOTH.,#293009); +#293009 = SURFACE_SIDE_STYLE('',(#293010)); +#293010 = SURFACE_STYLE_FILL_AREA(#293011); +#293011 = FILL_AREA_STYLE('',(#293012)); +#293012 = FILL_AREA_STYLE_COLOUR('',#285989); +#293013 = CURVE_STYLE('',#293014,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293014 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293015 = STYLED_ITEM('color',(#293016),#34063); +#293016 = PRESENTATION_STYLE_ASSIGNMENT((#293017,#293022)); +#293017 = SURFACE_STYLE_USAGE(.BOTH.,#293018); +#293018 = SURFACE_SIDE_STYLE('',(#293019)); +#293019 = SURFACE_STYLE_FILL_AREA(#293020); +#293020 = FILL_AREA_STYLE('',(#293021)); +#293021 = FILL_AREA_STYLE_COLOUR('',#270350); +#293022 = CURVE_STYLE('',#293023,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293023 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293024 = OVER_RIDING_STYLED_ITEM('overriding color',(#293025),#34068, + #293015); +#293025 = PRESENTATION_STYLE_ASSIGNMENT((#293026,#293031)); +#293026 = SURFACE_STYLE_USAGE(.BOTH.,#293027); +#293027 = SURFACE_SIDE_STYLE('',(#293028)); +#293028 = SURFACE_STYLE_FILL_AREA(#293029); +#293029 = FILL_AREA_STYLE('',(#293030)); +#293030 = FILL_AREA_STYLE_COLOUR('',#285989); +#293031 = CURVE_STYLE('',#293032,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293032 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293033 = STYLED_ITEM('color',(#293034),#34080); +#293034 = PRESENTATION_STYLE_ASSIGNMENT((#293035,#293040)); +#293035 = SURFACE_STYLE_USAGE(.BOTH.,#293036); +#293036 = SURFACE_SIDE_STYLE('',(#293037)); +#293037 = SURFACE_STYLE_FILL_AREA(#293038); +#293038 = FILL_AREA_STYLE('',(#293039)); +#293039 = FILL_AREA_STYLE_COLOUR('',#285989); +#293040 = CURVE_STYLE('',#293041,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293041 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293042 = STYLED_ITEM('color',(#293043),#34129); +#293043 = PRESENTATION_STYLE_ASSIGNMENT((#293044,#293049)); +#293044 = SURFACE_STYLE_USAGE(.BOTH.,#293045); +#293045 = SURFACE_SIDE_STYLE('',(#293046)); +#293046 = SURFACE_STYLE_FILL_AREA(#293047); +#293047 = FILL_AREA_STYLE('',(#293048)); +#293048 = FILL_AREA_STYLE_COLOUR('',#285989); +#293049 = CURVE_STYLE('',#293050,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293050 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293051 = STYLED_ITEM('color',(#293052),#34153); +#293052 = PRESENTATION_STYLE_ASSIGNMENT((#293053,#293058)); +#293053 = SURFACE_STYLE_USAGE(.BOTH.,#293054); +#293054 = SURFACE_SIDE_STYLE('',(#293055)); +#293055 = SURFACE_STYLE_FILL_AREA(#293056); +#293056 = FILL_AREA_STYLE('',(#293057)); +#293057 = FILL_AREA_STYLE_COLOUR('',#285989); +#293058 = CURVE_STYLE('',#293059,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293059 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293060 = STYLED_ITEM('color',(#293061),#34195); +#293061 = PRESENTATION_STYLE_ASSIGNMENT((#293062,#293067)); +#293062 = SURFACE_STYLE_USAGE(.BOTH.,#293063); +#293063 = SURFACE_SIDE_STYLE('',(#293064)); +#293064 = SURFACE_STYLE_FILL_AREA(#293065); +#293065 = FILL_AREA_STYLE('',(#293066)); +#293066 = FILL_AREA_STYLE_COLOUR('',#285989); +#293067 = CURVE_STYLE('',#293068,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293068 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293069 = STYLED_ITEM('color',(#293070),#34212); +#293070 = PRESENTATION_STYLE_ASSIGNMENT((#293071,#293076)); +#293071 = SURFACE_STYLE_USAGE(.BOTH.,#293072); +#293072 = SURFACE_SIDE_STYLE('',(#293073)); +#293073 = SURFACE_STYLE_FILL_AREA(#293074); +#293074 = FILL_AREA_STYLE('',(#293075)); +#293075 = FILL_AREA_STYLE_COLOUR('',#270350); +#293076 = CURVE_STYLE('',#293077,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293077 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293078 = OVER_RIDING_STYLED_ITEM('overriding color',(#293079),#34219, + #293069); +#293079 = PRESENTATION_STYLE_ASSIGNMENT((#293080,#293085)); +#293080 = SURFACE_STYLE_USAGE(.BOTH.,#293081); +#293081 = SURFACE_SIDE_STYLE('',(#293082)); +#293082 = SURFACE_STYLE_FILL_AREA(#293083); +#293083 = FILL_AREA_STYLE('',(#293084)); +#293084 = FILL_AREA_STYLE_COLOUR('',#285989); +#293085 = CURVE_STYLE('',#293086,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293086 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293087 = STYLED_ITEM('color',(#293088),#34229); +#293088 = PRESENTATION_STYLE_ASSIGNMENT((#293089,#293094)); +#293089 = SURFACE_STYLE_USAGE(.BOTH.,#293090); +#293090 = SURFACE_SIDE_STYLE('',(#293091)); +#293091 = SURFACE_STYLE_FILL_AREA(#293092); +#293092 = FILL_AREA_STYLE('',(#293093)); +#293093 = FILL_AREA_STYLE_COLOUR('',#270350); +#293094 = CURVE_STYLE('',#293095,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293095 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293096 = OVER_RIDING_STYLED_ITEM('overriding color',(#293097),#34234, + #293087); +#293097 = PRESENTATION_STYLE_ASSIGNMENT((#293098,#293103)); +#293098 = SURFACE_STYLE_USAGE(.BOTH.,#293099); +#293099 = SURFACE_SIDE_STYLE('',(#293100)); +#293100 = SURFACE_STYLE_FILL_AREA(#293101); +#293101 = FILL_AREA_STYLE('',(#293102)); +#293102 = FILL_AREA_STYLE_COLOUR('',#285989); +#293103 = CURVE_STYLE('',#293104,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293104 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293105 = STYLED_ITEM('color',(#293106),#34246); +#293106 = PRESENTATION_STYLE_ASSIGNMENT((#293107,#293112)); +#293107 = SURFACE_STYLE_USAGE(.BOTH.,#293108); +#293108 = SURFACE_SIDE_STYLE('',(#293109)); +#293109 = SURFACE_STYLE_FILL_AREA(#293110); +#293110 = FILL_AREA_STYLE('',(#293111)); +#293111 = FILL_AREA_STYLE_COLOUR('',#285989); +#293112 = CURVE_STYLE('',#293113,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293113 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293114 = STYLED_ITEM('color',(#293115),#34295); +#293115 = PRESENTATION_STYLE_ASSIGNMENT((#293116,#293121)); +#293116 = SURFACE_STYLE_USAGE(.BOTH.,#293117); +#293117 = SURFACE_SIDE_STYLE('',(#293118)); +#293118 = SURFACE_STYLE_FILL_AREA(#293119); +#293119 = FILL_AREA_STYLE('',(#293120)); +#293120 = FILL_AREA_STYLE_COLOUR('',#285989); +#293121 = CURVE_STYLE('',#293122,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293122 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293123 = STYLED_ITEM('color',(#293124),#34319); +#293124 = PRESENTATION_STYLE_ASSIGNMENT((#293125,#293130)); +#293125 = SURFACE_STYLE_USAGE(.BOTH.,#293126); +#293126 = SURFACE_SIDE_STYLE('',(#293127)); +#293127 = SURFACE_STYLE_FILL_AREA(#293128); +#293128 = FILL_AREA_STYLE('',(#293129)); +#293129 = FILL_AREA_STYLE_COLOUR('',#285989); +#293130 = CURVE_STYLE('',#293131,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293131 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293132 = STYLED_ITEM('color',(#293133),#34361); +#293133 = PRESENTATION_STYLE_ASSIGNMENT((#293134,#293139)); +#293134 = SURFACE_STYLE_USAGE(.BOTH.,#293135); +#293135 = SURFACE_SIDE_STYLE('',(#293136)); +#293136 = SURFACE_STYLE_FILL_AREA(#293137); +#293137 = FILL_AREA_STYLE('',(#293138)); +#293138 = FILL_AREA_STYLE_COLOUR('',#285989); +#293139 = CURVE_STYLE('',#293140,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293140 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293141 = STYLED_ITEM('color',(#293142),#34378); +#293142 = PRESENTATION_STYLE_ASSIGNMENT((#293143,#293148)); +#293143 = SURFACE_STYLE_USAGE(.BOTH.,#293144); +#293144 = SURFACE_SIDE_STYLE('',(#293145)); +#293145 = SURFACE_STYLE_FILL_AREA(#293146); +#293146 = FILL_AREA_STYLE('',(#293147)); +#293147 = FILL_AREA_STYLE_COLOUR('',#270350); +#293148 = CURVE_STYLE('',#293149,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293149 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293150 = OVER_RIDING_STYLED_ITEM('overriding color',(#293151),#34385, + #293141); +#293151 = PRESENTATION_STYLE_ASSIGNMENT((#293152,#293157)); +#293152 = SURFACE_STYLE_USAGE(.BOTH.,#293153); +#293153 = SURFACE_SIDE_STYLE('',(#293154)); +#293154 = SURFACE_STYLE_FILL_AREA(#293155); +#293155 = FILL_AREA_STYLE('',(#293156)); +#293156 = FILL_AREA_STYLE_COLOUR('',#285989); +#293157 = CURVE_STYLE('',#293158,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293158 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293159 = STYLED_ITEM('color',(#293160),#34395); +#293160 = PRESENTATION_STYLE_ASSIGNMENT((#293161,#293166)); +#293161 = SURFACE_STYLE_USAGE(.BOTH.,#293162); +#293162 = SURFACE_SIDE_STYLE('',(#293163)); +#293163 = SURFACE_STYLE_FILL_AREA(#293164); +#293164 = FILL_AREA_STYLE('',(#293165)); +#293165 = FILL_AREA_STYLE_COLOUR('',#270350); +#293166 = CURVE_STYLE('',#293167,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293167 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293168 = OVER_RIDING_STYLED_ITEM('overriding color',(#293169),#34400, + #293159); +#293169 = PRESENTATION_STYLE_ASSIGNMENT((#293170,#293175)); +#293170 = SURFACE_STYLE_USAGE(.BOTH.,#293171); +#293171 = SURFACE_SIDE_STYLE('',(#293172)); +#293172 = SURFACE_STYLE_FILL_AREA(#293173); +#293173 = FILL_AREA_STYLE('',(#293174)); +#293174 = FILL_AREA_STYLE_COLOUR('',#285989); +#293175 = CURVE_STYLE('',#293176,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293176 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293177 = STYLED_ITEM('color',(#293178),#34412); +#293178 = PRESENTATION_STYLE_ASSIGNMENT((#293179,#293184)); +#293179 = SURFACE_STYLE_USAGE(.BOTH.,#293180); +#293180 = SURFACE_SIDE_STYLE('',(#293181)); +#293181 = SURFACE_STYLE_FILL_AREA(#293182); +#293182 = FILL_AREA_STYLE('',(#293183)); +#293183 = FILL_AREA_STYLE_COLOUR('',#285989); +#293184 = CURVE_STYLE('',#293185,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293185 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293186 = STYLED_ITEM('color',(#293187),#34461); +#293187 = PRESENTATION_STYLE_ASSIGNMENT((#293188,#293193)); +#293188 = SURFACE_STYLE_USAGE(.BOTH.,#293189); +#293189 = SURFACE_SIDE_STYLE('',(#293190)); +#293190 = SURFACE_STYLE_FILL_AREA(#293191); +#293191 = FILL_AREA_STYLE('',(#293192)); +#293192 = FILL_AREA_STYLE_COLOUR('',#285989); +#293193 = CURVE_STYLE('',#293194,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293194 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293195 = STYLED_ITEM('color',(#293196),#34485); +#293196 = PRESENTATION_STYLE_ASSIGNMENT((#293197,#293202)); +#293197 = SURFACE_STYLE_USAGE(.BOTH.,#293198); +#293198 = SURFACE_SIDE_STYLE('',(#293199)); +#293199 = SURFACE_STYLE_FILL_AREA(#293200); +#293200 = FILL_AREA_STYLE('',(#293201)); +#293201 = FILL_AREA_STYLE_COLOUR('',#285989); +#293202 = CURVE_STYLE('',#293203,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293203 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293204 = STYLED_ITEM('color',(#293205),#34527); +#293205 = PRESENTATION_STYLE_ASSIGNMENT((#293206,#293211)); +#293206 = SURFACE_STYLE_USAGE(.BOTH.,#293207); +#293207 = SURFACE_SIDE_STYLE('',(#293208)); +#293208 = SURFACE_STYLE_FILL_AREA(#293209); +#293209 = FILL_AREA_STYLE('',(#293210)); +#293210 = FILL_AREA_STYLE_COLOUR('',#285989); +#293211 = CURVE_STYLE('',#293212,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293212 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293213 = STYLED_ITEM('color',(#293214),#34544); +#293214 = PRESENTATION_STYLE_ASSIGNMENT((#293215,#293220)); +#293215 = SURFACE_STYLE_USAGE(.BOTH.,#293216); +#293216 = SURFACE_SIDE_STYLE('',(#293217)); +#293217 = SURFACE_STYLE_FILL_AREA(#293218); +#293218 = FILL_AREA_STYLE('',(#293219)); +#293219 = FILL_AREA_STYLE_COLOUR('',#270350); +#293220 = CURVE_STYLE('',#293221,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293221 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293222 = OVER_RIDING_STYLED_ITEM('overriding color',(#293223),#34551, + #293213); +#293223 = PRESENTATION_STYLE_ASSIGNMENT((#293224,#293229)); +#293224 = SURFACE_STYLE_USAGE(.BOTH.,#293225); +#293225 = SURFACE_SIDE_STYLE('',(#293226)); +#293226 = SURFACE_STYLE_FILL_AREA(#293227); +#293227 = FILL_AREA_STYLE('',(#293228)); +#293228 = FILL_AREA_STYLE_COLOUR('',#285989); +#293229 = CURVE_STYLE('',#293230,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293230 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293231 = STYLED_ITEM('color',(#293232),#34561); +#293232 = PRESENTATION_STYLE_ASSIGNMENT((#293233,#293238)); +#293233 = SURFACE_STYLE_USAGE(.BOTH.,#293234); +#293234 = SURFACE_SIDE_STYLE('',(#293235)); +#293235 = SURFACE_STYLE_FILL_AREA(#293236); +#293236 = FILL_AREA_STYLE('',(#293237)); +#293237 = FILL_AREA_STYLE_COLOUR('',#270350); +#293238 = CURVE_STYLE('',#293239,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293239 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293240 = OVER_RIDING_STYLED_ITEM('overriding color',(#293241),#34566, + #293231); +#293241 = PRESENTATION_STYLE_ASSIGNMENT((#293242,#293247)); +#293242 = SURFACE_STYLE_USAGE(.BOTH.,#293243); +#293243 = SURFACE_SIDE_STYLE('',(#293244)); +#293244 = SURFACE_STYLE_FILL_AREA(#293245); +#293245 = FILL_AREA_STYLE('',(#293246)); +#293246 = FILL_AREA_STYLE_COLOUR('',#285989); +#293247 = CURVE_STYLE('',#293248,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293248 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293249 = STYLED_ITEM('color',(#293250),#34578); +#293250 = PRESENTATION_STYLE_ASSIGNMENT((#293251,#293256)); +#293251 = SURFACE_STYLE_USAGE(.BOTH.,#293252); +#293252 = SURFACE_SIDE_STYLE('',(#293253)); +#293253 = SURFACE_STYLE_FILL_AREA(#293254); +#293254 = FILL_AREA_STYLE('',(#293255)); +#293255 = FILL_AREA_STYLE_COLOUR('',#285989); +#293256 = CURVE_STYLE('',#293257,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293257 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293258 = STYLED_ITEM('color',(#293259),#34627); +#293259 = PRESENTATION_STYLE_ASSIGNMENT((#293260,#293265)); +#293260 = SURFACE_STYLE_USAGE(.BOTH.,#293261); +#293261 = SURFACE_SIDE_STYLE('',(#293262)); +#293262 = SURFACE_STYLE_FILL_AREA(#293263); +#293263 = FILL_AREA_STYLE('',(#293264)); +#293264 = FILL_AREA_STYLE_COLOUR('',#285989); +#293265 = CURVE_STYLE('',#293266,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293266 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293267 = STYLED_ITEM('color',(#293268),#34651); +#293268 = PRESENTATION_STYLE_ASSIGNMENT((#293269,#293274)); +#293269 = SURFACE_STYLE_USAGE(.BOTH.,#293270); +#293270 = SURFACE_SIDE_STYLE('',(#293271)); +#293271 = SURFACE_STYLE_FILL_AREA(#293272); +#293272 = FILL_AREA_STYLE('',(#293273)); +#293273 = FILL_AREA_STYLE_COLOUR('',#285989); +#293274 = CURVE_STYLE('',#293275,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293275 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293276 = STYLED_ITEM('color',(#293277),#34693); +#293277 = PRESENTATION_STYLE_ASSIGNMENT((#293278,#293283)); +#293278 = SURFACE_STYLE_USAGE(.BOTH.,#293279); +#293279 = SURFACE_SIDE_STYLE('',(#293280)); +#293280 = SURFACE_STYLE_FILL_AREA(#293281); +#293281 = FILL_AREA_STYLE('',(#293282)); +#293282 = FILL_AREA_STYLE_COLOUR('',#285989); +#293283 = CURVE_STYLE('',#293284,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293284 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293285 = STYLED_ITEM('color',(#293286),#34710); +#293286 = PRESENTATION_STYLE_ASSIGNMENT((#293287,#293292)); +#293287 = SURFACE_STYLE_USAGE(.BOTH.,#293288); +#293288 = SURFACE_SIDE_STYLE('',(#293289)); +#293289 = SURFACE_STYLE_FILL_AREA(#293290); +#293290 = FILL_AREA_STYLE('',(#293291)); +#293291 = FILL_AREA_STYLE_COLOUR('',#270350); +#293292 = CURVE_STYLE('',#293293,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293293 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293294 = OVER_RIDING_STYLED_ITEM('overriding color',(#293295),#34717, + #293285); +#293295 = PRESENTATION_STYLE_ASSIGNMENT((#293296,#293301)); +#293296 = SURFACE_STYLE_USAGE(.BOTH.,#293297); +#293297 = SURFACE_SIDE_STYLE('',(#293298)); +#293298 = SURFACE_STYLE_FILL_AREA(#293299); +#293299 = FILL_AREA_STYLE('',(#293300)); +#293300 = FILL_AREA_STYLE_COLOUR('',#285989); +#293301 = CURVE_STYLE('',#293302,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293302 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293303 = STYLED_ITEM('color',(#293304),#34727); +#293304 = PRESENTATION_STYLE_ASSIGNMENT((#293305,#293310)); +#293305 = SURFACE_STYLE_USAGE(.BOTH.,#293306); +#293306 = SURFACE_SIDE_STYLE('',(#293307)); +#293307 = SURFACE_STYLE_FILL_AREA(#293308); +#293308 = FILL_AREA_STYLE('',(#293309)); +#293309 = FILL_AREA_STYLE_COLOUR('',#270350); +#293310 = CURVE_STYLE('',#293311,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293311 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293312 = OVER_RIDING_STYLED_ITEM('overriding color',(#293313),#34732, + #293303); +#293313 = PRESENTATION_STYLE_ASSIGNMENT((#293314,#293319)); +#293314 = SURFACE_STYLE_USAGE(.BOTH.,#293315); +#293315 = SURFACE_SIDE_STYLE('',(#293316)); +#293316 = SURFACE_STYLE_FILL_AREA(#293317); +#293317 = FILL_AREA_STYLE('',(#293318)); +#293318 = FILL_AREA_STYLE_COLOUR('',#285989); +#293319 = CURVE_STYLE('',#293320,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293320 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293321 = STYLED_ITEM('color',(#293322),#34744); +#293322 = PRESENTATION_STYLE_ASSIGNMENT((#293323,#293328)); +#293323 = SURFACE_STYLE_USAGE(.BOTH.,#293324); +#293324 = SURFACE_SIDE_STYLE('',(#293325)); +#293325 = SURFACE_STYLE_FILL_AREA(#293326); +#293326 = FILL_AREA_STYLE('',(#293327)); +#293327 = FILL_AREA_STYLE_COLOUR('',#285989); +#293328 = CURVE_STYLE('',#293329,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293329 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293330 = STYLED_ITEM('color',(#293331),#34793); +#293331 = PRESENTATION_STYLE_ASSIGNMENT((#293332,#293337)); +#293332 = SURFACE_STYLE_USAGE(.BOTH.,#293333); +#293333 = SURFACE_SIDE_STYLE('',(#293334)); +#293334 = SURFACE_STYLE_FILL_AREA(#293335); +#293335 = FILL_AREA_STYLE('',(#293336)); +#293336 = FILL_AREA_STYLE_COLOUR('',#285989); +#293337 = CURVE_STYLE('',#293338,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293338 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293339 = STYLED_ITEM('color',(#293340),#34817); +#293340 = PRESENTATION_STYLE_ASSIGNMENT((#293341,#293346)); +#293341 = SURFACE_STYLE_USAGE(.BOTH.,#293342); +#293342 = SURFACE_SIDE_STYLE('',(#293343)); +#293343 = SURFACE_STYLE_FILL_AREA(#293344); +#293344 = FILL_AREA_STYLE('',(#293345)); +#293345 = FILL_AREA_STYLE_COLOUR('',#285989); +#293346 = CURVE_STYLE('',#293347,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293347 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293348 = STYLED_ITEM('color',(#293349),#34859); +#293349 = PRESENTATION_STYLE_ASSIGNMENT((#293350,#293355)); +#293350 = SURFACE_STYLE_USAGE(.BOTH.,#293351); +#293351 = SURFACE_SIDE_STYLE('',(#293352)); +#293352 = SURFACE_STYLE_FILL_AREA(#293353); +#293353 = FILL_AREA_STYLE('',(#293354)); +#293354 = FILL_AREA_STYLE_COLOUR('',#285989); +#293355 = CURVE_STYLE('',#293356,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293356 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293357 = STYLED_ITEM('color',(#293358),#34876); +#293358 = PRESENTATION_STYLE_ASSIGNMENT((#293359,#293364)); +#293359 = SURFACE_STYLE_USAGE(.BOTH.,#293360); +#293360 = SURFACE_SIDE_STYLE('',(#293361)); +#293361 = SURFACE_STYLE_FILL_AREA(#293362); +#293362 = FILL_AREA_STYLE('',(#293363)); +#293363 = FILL_AREA_STYLE_COLOUR('',#270350); +#293364 = CURVE_STYLE('',#293365,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293365 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293366 = OVER_RIDING_STYLED_ITEM('overriding color',(#293367),#34883, + #293357); +#293367 = PRESENTATION_STYLE_ASSIGNMENT((#293368,#293373)); +#293368 = SURFACE_STYLE_USAGE(.BOTH.,#293369); +#293369 = SURFACE_SIDE_STYLE('',(#293370)); +#293370 = SURFACE_STYLE_FILL_AREA(#293371); +#293371 = FILL_AREA_STYLE('',(#293372)); +#293372 = FILL_AREA_STYLE_COLOUR('',#285989); +#293373 = CURVE_STYLE('',#293374,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293374 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293375 = STYLED_ITEM('color',(#293376),#34893); +#293376 = PRESENTATION_STYLE_ASSIGNMENT((#293377,#293382)); +#293377 = SURFACE_STYLE_USAGE(.BOTH.,#293378); +#293378 = SURFACE_SIDE_STYLE('',(#293379)); +#293379 = SURFACE_STYLE_FILL_AREA(#293380); +#293380 = FILL_AREA_STYLE('',(#293381)); +#293381 = FILL_AREA_STYLE_COLOUR('',#270350); +#293382 = CURVE_STYLE('',#293383,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293383 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293384 = OVER_RIDING_STYLED_ITEM('overriding color',(#293385),#34898, + #293375); +#293385 = PRESENTATION_STYLE_ASSIGNMENT((#293386,#293391)); +#293386 = SURFACE_STYLE_USAGE(.BOTH.,#293387); +#293387 = SURFACE_SIDE_STYLE('',(#293388)); +#293388 = SURFACE_STYLE_FILL_AREA(#293389); +#293389 = FILL_AREA_STYLE('',(#293390)); +#293390 = FILL_AREA_STYLE_COLOUR('',#285989); +#293391 = CURVE_STYLE('',#293392,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293392 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293393 = STYLED_ITEM('color',(#293394),#34910); +#293394 = PRESENTATION_STYLE_ASSIGNMENT((#293395,#293400)); +#293395 = SURFACE_STYLE_USAGE(.BOTH.,#293396); +#293396 = SURFACE_SIDE_STYLE('',(#293397)); +#293397 = SURFACE_STYLE_FILL_AREA(#293398); +#293398 = FILL_AREA_STYLE('',(#293399)); +#293399 = FILL_AREA_STYLE_COLOUR('',#285989); +#293400 = CURVE_STYLE('',#293401,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293401 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293402 = STYLED_ITEM('color',(#293403),#34959); +#293403 = PRESENTATION_STYLE_ASSIGNMENT((#293404,#293409)); +#293404 = SURFACE_STYLE_USAGE(.BOTH.,#293405); +#293405 = SURFACE_SIDE_STYLE('',(#293406)); +#293406 = SURFACE_STYLE_FILL_AREA(#293407); +#293407 = FILL_AREA_STYLE('',(#293408)); +#293408 = FILL_AREA_STYLE_COLOUR('',#285989); +#293409 = CURVE_STYLE('',#293410,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293410 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293411 = STYLED_ITEM('color',(#293412),#34983); +#293412 = PRESENTATION_STYLE_ASSIGNMENT((#293413,#293418)); +#293413 = SURFACE_STYLE_USAGE(.BOTH.,#293414); +#293414 = SURFACE_SIDE_STYLE('',(#293415)); +#293415 = SURFACE_STYLE_FILL_AREA(#293416); +#293416 = FILL_AREA_STYLE('',(#293417)); +#293417 = FILL_AREA_STYLE_COLOUR('',#285989); +#293418 = CURVE_STYLE('',#293419,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293419 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293420 = STYLED_ITEM('color',(#293421),#35025); +#293421 = PRESENTATION_STYLE_ASSIGNMENT((#293422,#293427)); +#293422 = SURFACE_STYLE_USAGE(.BOTH.,#293423); +#293423 = SURFACE_SIDE_STYLE('',(#293424)); +#293424 = SURFACE_STYLE_FILL_AREA(#293425); +#293425 = FILL_AREA_STYLE('',(#293426)); +#293426 = FILL_AREA_STYLE_COLOUR('',#285989); +#293427 = CURVE_STYLE('',#293428,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293428 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293429 = STYLED_ITEM('color',(#293430),#35042); +#293430 = PRESENTATION_STYLE_ASSIGNMENT((#293431,#293436)); +#293431 = SURFACE_STYLE_USAGE(.BOTH.,#293432); +#293432 = SURFACE_SIDE_STYLE('',(#293433)); +#293433 = SURFACE_STYLE_FILL_AREA(#293434); +#293434 = FILL_AREA_STYLE('',(#293435)); +#293435 = FILL_AREA_STYLE_COLOUR('',#270350); +#293436 = CURVE_STYLE('',#293437,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293437 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293438 = OVER_RIDING_STYLED_ITEM('overriding color',(#293439),#35049, + #293429); +#293439 = PRESENTATION_STYLE_ASSIGNMENT((#293440,#293445)); +#293440 = SURFACE_STYLE_USAGE(.BOTH.,#293441); +#293441 = SURFACE_SIDE_STYLE('',(#293442)); +#293442 = SURFACE_STYLE_FILL_AREA(#293443); +#293443 = FILL_AREA_STYLE('',(#293444)); +#293444 = FILL_AREA_STYLE_COLOUR('',#285989); +#293445 = CURVE_STYLE('',#293446,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293446 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293447 = STYLED_ITEM('color',(#293448),#35059); +#293448 = PRESENTATION_STYLE_ASSIGNMENT((#293449,#293454)); +#293449 = SURFACE_STYLE_USAGE(.BOTH.,#293450); +#293450 = SURFACE_SIDE_STYLE('',(#293451)); +#293451 = SURFACE_STYLE_FILL_AREA(#293452); +#293452 = FILL_AREA_STYLE('',(#293453)); +#293453 = FILL_AREA_STYLE_COLOUR('',#270350); +#293454 = CURVE_STYLE('',#293455,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#293455 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293456 = OVER_RIDING_STYLED_ITEM('overriding color',(#293457),#35064, + #293447); +#293457 = PRESENTATION_STYLE_ASSIGNMENT((#293458,#293463)); +#293458 = SURFACE_STYLE_USAGE(.BOTH.,#293459); +#293459 = SURFACE_SIDE_STYLE('',(#293460)); +#293460 = SURFACE_STYLE_FILL_AREA(#293461); +#293461 = FILL_AREA_STYLE('',(#293462)); +#293462 = FILL_AREA_STYLE_COLOUR('',#285989); +#293463 = CURVE_STYLE('',#293464,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293464 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293465 = STYLED_ITEM('color',(#293466),#35076); +#293466 = PRESENTATION_STYLE_ASSIGNMENT((#293467,#293472)); +#293467 = SURFACE_STYLE_USAGE(.BOTH.,#293468); +#293468 = SURFACE_SIDE_STYLE('',(#293469)); +#293469 = SURFACE_STYLE_FILL_AREA(#293470); +#293470 = FILL_AREA_STYLE('',(#293471)); +#293471 = FILL_AREA_STYLE_COLOUR('',#285989); +#293472 = CURVE_STYLE('',#293473,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293473 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293474 = STYLED_ITEM('color',(#293475),#35125); +#293475 = PRESENTATION_STYLE_ASSIGNMENT((#293476,#293481)); +#293476 = SURFACE_STYLE_USAGE(.BOTH.,#293477); +#293477 = SURFACE_SIDE_STYLE('',(#293478)); +#293478 = SURFACE_STYLE_FILL_AREA(#293479); +#293479 = FILL_AREA_STYLE('',(#293480)); +#293480 = FILL_AREA_STYLE_COLOUR('',#285989); +#293481 = CURVE_STYLE('',#293482,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293482 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293483 = STYLED_ITEM('color',(#293484),#35149); +#293484 = PRESENTATION_STYLE_ASSIGNMENT((#293485,#293490)); +#293485 = SURFACE_STYLE_USAGE(.BOTH.,#293486); +#293486 = SURFACE_SIDE_STYLE('',(#293487)); +#293487 = SURFACE_STYLE_FILL_AREA(#293488); +#293488 = FILL_AREA_STYLE('',(#293489)); +#293489 = FILL_AREA_STYLE_COLOUR('',#285989); +#293490 = CURVE_STYLE('',#293491,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293491 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293492 = STYLED_ITEM('color',(#293493),#35191); +#293493 = PRESENTATION_STYLE_ASSIGNMENT((#293494,#293499)); +#293494 = SURFACE_STYLE_USAGE(.BOTH.,#293495); +#293495 = SURFACE_SIDE_STYLE('',(#293496)); +#293496 = SURFACE_STYLE_FILL_AREA(#293497); +#293497 = FILL_AREA_STYLE('',(#293498)); +#293498 = FILL_AREA_STYLE_COLOUR('',#285989); +#293499 = CURVE_STYLE('',#293500,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293500 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293501 = STYLED_ITEM('color',(#293502),#35208); +#293502 = PRESENTATION_STYLE_ASSIGNMENT((#293503,#293508)); +#293503 = SURFACE_STYLE_USAGE(.BOTH.,#293504); +#293504 = SURFACE_SIDE_STYLE('',(#293505)); +#293505 = SURFACE_STYLE_FILL_AREA(#293506); +#293506 = FILL_AREA_STYLE('',(#293507)); +#293507 = FILL_AREA_STYLE_COLOUR('',#285989); +#293508 = CURVE_STYLE('',#293509,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293509 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293510 = STYLED_ITEM('color',(#293511),#35225); +#293511 = PRESENTATION_STYLE_ASSIGNMENT((#293512,#293517)); +#293512 = SURFACE_STYLE_USAGE(.BOTH.,#293513); +#293513 = SURFACE_SIDE_STYLE('',(#293514)); +#293514 = SURFACE_STYLE_FILL_AREA(#293515); +#293515 = FILL_AREA_STYLE('',(#293516)); +#293516 = FILL_AREA_STYLE_COLOUR('',#285989); +#293517 = CURVE_STYLE('',#293518,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293518 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293519 = STYLED_ITEM('color',(#293520),#35242); +#293520 = PRESENTATION_STYLE_ASSIGNMENT((#293521,#293526)); +#293521 = SURFACE_STYLE_USAGE(.BOTH.,#293522); +#293522 = SURFACE_SIDE_STYLE('',(#293523)); +#293523 = SURFACE_STYLE_FILL_AREA(#293524); +#293524 = FILL_AREA_STYLE('',(#293525)); +#293525 = FILL_AREA_STYLE_COLOUR('',#285989); +#293526 = CURVE_STYLE('',#293527,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293527 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293528 = STYLED_ITEM('color',(#293529),#35254); +#293529 = PRESENTATION_STYLE_ASSIGNMENT((#293530,#293535)); +#293530 = SURFACE_STYLE_USAGE(.BOTH.,#293531); +#293531 = SURFACE_SIDE_STYLE('',(#293532)); +#293532 = SURFACE_STYLE_FILL_AREA(#293533); +#293533 = FILL_AREA_STYLE('',(#293534)); +#293534 = FILL_AREA_STYLE_COLOUR('',#285989); +#293535 = CURVE_STYLE('',#293536,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293536 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293537 = STYLED_ITEM('color',(#293538),#35271); +#293538 = PRESENTATION_STYLE_ASSIGNMENT((#293539,#293544)); +#293539 = SURFACE_STYLE_USAGE(.BOTH.,#293540); +#293540 = SURFACE_SIDE_STYLE('',(#293541)); +#293541 = SURFACE_STYLE_FILL_AREA(#293542); +#293542 = FILL_AREA_STYLE('',(#293543)); +#293543 = FILL_AREA_STYLE_COLOUR('',#285989); +#293544 = CURVE_STYLE('',#293545,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293545 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293546 = STYLED_ITEM('color',(#293547),#35288); +#293547 = PRESENTATION_STYLE_ASSIGNMENT((#293548,#293553)); +#293548 = SURFACE_STYLE_USAGE(.BOTH.,#293549); +#293549 = SURFACE_SIDE_STYLE('',(#293550)); +#293550 = SURFACE_STYLE_FILL_AREA(#293551); +#293551 = FILL_AREA_STYLE('',(#293552)); +#293552 = FILL_AREA_STYLE_COLOUR('',#285989); +#293553 = CURVE_STYLE('',#293554,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293554 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293555 = STYLED_ITEM('color',(#293556),#35300); +#293556 = PRESENTATION_STYLE_ASSIGNMENT((#293557,#293562)); +#293557 = SURFACE_STYLE_USAGE(.BOTH.,#293558); +#293558 = SURFACE_SIDE_STYLE('',(#293559)); +#293559 = SURFACE_STYLE_FILL_AREA(#293560); +#293560 = FILL_AREA_STYLE('',(#293561)); +#293561 = FILL_AREA_STYLE_COLOUR('',#285989); +#293562 = CURVE_STYLE('',#293563,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293563 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293564 = STYLED_ITEM('color',(#293565),#35317); +#293565 = PRESENTATION_STYLE_ASSIGNMENT((#293566,#293571)); +#293566 = SURFACE_STYLE_USAGE(.BOTH.,#293567); +#293567 = SURFACE_SIDE_STYLE('',(#293568)); +#293568 = SURFACE_STYLE_FILL_AREA(#293569); +#293569 = FILL_AREA_STYLE('',(#293570)); +#293570 = FILL_AREA_STYLE_COLOUR('',#285989); +#293571 = CURVE_STYLE('',#293572,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293572 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293573 = STYLED_ITEM('color',(#293574),#35334); +#293574 = PRESENTATION_STYLE_ASSIGNMENT((#293575,#293580)); +#293575 = SURFACE_STYLE_USAGE(.BOTH.,#293576); +#293576 = SURFACE_SIDE_STYLE('',(#293577)); +#293577 = SURFACE_STYLE_FILL_AREA(#293578); +#293578 = FILL_AREA_STYLE('',(#293579)); +#293579 = FILL_AREA_STYLE_COLOUR('',#285989); +#293580 = CURVE_STYLE('',#293581,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293581 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293582 = STYLED_ITEM('color',(#293583),#35346); +#293583 = PRESENTATION_STYLE_ASSIGNMENT((#293584,#293589)); +#293584 = SURFACE_STYLE_USAGE(.BOTH.,#293585); +#293585 = SURFACE_SIDE_STYLE('',(#293586)); +#293586 = SURFACE_STYLE_FILL_AREA(#293587); +#293587 = FILL_AREA_STYLE('',(#293588)); +#293588 = FILL_AREA_STYLE_COLOUR('',#285989); +#293589 = CURVE_STYLE('',#293590,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293590 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293591 = STYLED_ITEM('color',(#293592),#35363); +#293592 = PRESENTATION_STYLE_ASSIGNMENT((#293593,#293598)); +#293593 = SURFACE_STYLE_USAGE(.BOTH.,#293594); +#293594 = SURFACE_SIDE_STYLE('',(#293595)); +#293595 = SURFACE_STYLE_FILL_AREA(#293596); +#293596 = FILL_AREA_STYLE('',(#293597)); +#293597 = FILL_AREA_STYLE_COLOUR('',#285989); +#293598 = CURVE_STYLE('',#293599,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293599 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293600 = STYLED_ITEM('color',(#293601),#35380); +#293601 = PRESENTATION_STYLE_ASSIGNMENT((#293602,#293607)); +#293602 = SURFACE_STYLE_USAGE(.BOTH.,#293603); +#293603 = SURFACE_SIDE_STYLE('',(#293604)); +#293604 = SURFACE_STYLE_FILL_AREA(#293605); +#293605 = FILL_AREA_STYLE('',(#293606)); +#293606 = FILL_AREA_STYLE_COLOUR('',#285989); +#293607 = CURVE_STYLE('',#293608,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293608 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293609 = STYLED_ITEM('color',(#293610),#35392); +#293610 = PRESENTATION_STYLE_ASSIGNMENT((#293611,#293616)); +#293611 = SURFACE_STYLE_USAGE(.BOTH.,#293612); +#293612 = SURFACE_SIDE_STYLE('',(#293613)); +#293613 = SURFACE_STYLE_FILL_AREA(#293614); +#293614 = FILL_AREA_STYLE('',(#293615)); +#293615 = FILL_AREA_STYLE_COLOUR('',#285989); +#293616 = CURVE_STYLE('',#293617,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293617 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293618 = STYLED_ITEM('color',(#293619),#35409); +#293619 = PRESENTATION_STYLE_ASSIGNMENT((#293620,#293625)); +#293620 = SURFACE_STYLE_USAGE(.BOTH.,#293621); +#293621 = SURFACE_SIDE_STYLE('',(#293622)); +#293622 = SURFACE_STYLE_FILL_AREA(#293623); +#293623 = FILL_AREA_STYLE('',(#293624)); +#293624 = FILL_AREA_STYLE_COLOUR('',#285989); +#293625 = CURVE_STYLE('',#293626,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293626 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293627 = STYLED_ITEM('color',(#293628),#35426); +#293628 = PRESENTATION_STYLE_ASSIGNMENT((#293629,#293634)); +#293629 = SURFACE_STYLE_USAGE(.BOTH.,#293630); +#293630 = SURFACE_SIDE_STYLE('',(#293631)); +#293631 = SURFACE_STYLE_FILL_AREA(#293632); +#293632 = FILL_AREA_STYLE('',(#293633)); +#293633 = FILL_AREA_STYLE_COLOUR('',#285989); +#293634 = CURVE_STYLE('',#293635,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293635 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293636 = STYLED_ITEM('color',(#293637),#35438); +#293637 = PRESENTATION_STYLE_ASSIGNMENT((#293638,#293643)); +#293638 = SURFACE_STYLE_USAGE(.BOTH.,#293639); +#293639 = SURFACE_SIDE_STYLE('',(#293640)); +#293640 = SURFACE_STYLE_FILL_AREA(#293641); +#293641 = FILL_AREA_STYLE('',(#293642)); +#293642 = FILL_AREA_STYLE_COLOUR('',#285989); +#293643 = CURVE_STYLE('',#293644,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293644 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293645 = STYLED_ITEM('color',(#293646),#35455); +#293646 = PRESENTATION_STYLE_ASSIGNMENT((#293647,#293652)); +#293647 = SURFACE_STYLE_USAGE(.BOTH.,#293648); +#293648 = SURFACE_SIDE_STYLE('',(#293649)); +#293649 = SURFACE_STYLE_FILL_AREA(#293650); +#293650 = FILL_AREA_STYLE('',(#293651)); +#293651 = FILL_AREA_STYLE_COLOUR('',#285989); +#293652 = CURVE_STYLE('',#293653,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293653 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293654 = STYLED_ITEM('color',(#293655),#35472); +#293655 = PRESENTATION_STYLE_ASSIGNMENT((#293656,#293661)); +#293656 = SURFACE_STYLE_USAGE(.BOTH.,#293657); +#293657 = SURFACE_SIDE_STYLE('',(#293658)); +#293658 = SURFACE_STYLE_FILL_AREA(#293659); +#293659 = FILL_AREA_STYLE('',(#293660)); +#293660 = FILL_AREA_STYLE_COLOUR('',#285989); +#293661 = CURVE_STYLE('',#293662,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293662 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293663 = STYLED_ITEM('color',(#293664),#35484); +#293664 = PRESENTATION_STYLE_ASSIGNMENT((#293665,#293670)); +#293665 = SURFACE_STYLE_USAGE(.BOTH.,#293666); +#293666 = SURFACE_SIDE_STYLE('',(#293667)); +#293667 = SURFACE_STYLE_FILL_AREA(#293668); +#293668 = FILL_AREA_STYLE('',(#293669)); +#293669 = FILL_AREA_STYLE_COLOUR('',#285989); +#293670 = CURVE_STYLE('',#293671,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293671 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293672 = STYLED_ITEM('color',(#293673),#35501); +#293673 = PRESENTATION_STYLE_ASSIGNMENT((#293674,#293679)); +#293674 = SURFACE_STYLE_USAGE(.BOTH.,#293675); +#293675 = SURFACE_SIDE_STYLE('',(#293676)); +#293676 = SURFACE_STYLE_FILL_AREA(#293677); +#293677 = FILL_AREA_STYLE('',(#293678)); +#293678 = FILL_AREA_STYLE_COLOUR('',#285989); +#293679 = CURVE_STYLE('',#293680,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293680 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293681 = STYLED_ITEM('color',(#293682),#35518); +#293682 = PRESENTATION_STYLE_ASSIGNMENT((#293683,#293688)); +#293683 = SURFACE_STYLE_USAGE(.BOTH.,#293684); +#293684 = SURFACE_SIDE_STYLE('',(#293685)); +#293685 = SURFACE_STYLE_FILL_AREA(#293686); +#293686 = FILL_AREA_STYLE('',(#293687)); +#293687 = FILL_AREA_STYLE_COLOUR('',#285989); +#293688 = CURVE_STYLE('',#293689,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293689 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293690 = STYLED_ITEM('color',(#293691),#35530); +#293691 = PRESENTATION_STYLE_ASSIGNMENT((#293692,#293697)); +#293692 = SURFACE_STYLE_USAGE(.BOTH.,#293693); +#293693 = SURFACE_SIDE_STYLE('',(#293694)); +#293694 = SURFACE_STYLE_FILL_AREA(#293695); +#293695 = FILL_AREA_STYLE('',(#293696)); +#293696 = FILL_AREA_STYLE_COLOUR('',#285989); +#293697 = CURVE_STYLE('',#293698,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293698 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293699 = STYLED_ITEM('color',(#293700),#35547); +#293700 = PRESENTATION_STYLE_ASSIGNMENT((#293701,#293706)); +#293701 = SURFACE_STYLE_USAGE(.BOTH.,#293702); +#293702 = SURFACE_SIDE_STYLE('',(#293703)); +#293703 = SURFACE_STYLE_FILL_AREA(#293704); +#293704 = FILL_AREA_STYLE('',(#293705)); +#293705 = FILL_AREA_STYLE_COLOUR('',#285989); +#293706 = CURVE_STYLE('',#293707,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293707 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293708 = STYLED_ITEM('color',(#293709),#35564); +#293709 = PRESENTATION_STYLE_ASSIGNMENT((#293710,#293715)); +#293710 = SURFACE_STYLE_USAGE(.BOTH.,#293711); +#293711 = SURFACE_SIDE_STYLE('',(#293712)); +#293712 = SURFACE_STYLE_FILL_AREA(#293713); +#293713 = FILL_AREA_STYLE('',(#293714)); +#293714 = FILL_AREA_STYLE_COLOUR('',#285989); +#293715 = CURVE_STYLE('',#293716,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293716 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293717 = STYLED_ITEM('color',(#293718),#35576); +#293718 = PRESENTATION_STYLE_ASSIGNMENT((#293719,#293724)); +#293719 = SURFACE_STYLE_USAGE(.BOTH.,#293720); +#293720 = SURFACE_SIDE_STYLE('',(#293721)); +#293721 = SURFACE_STYLE_FILL_AREA(#293722); +#293722 = FILL_AREA_STYLE('',(#293723)); +#293723 = FILL_AREA_STYLE_COLOUR('',#285989); +#293724 = CURVE_STYLE('',#293725,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293725 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293726 = STYLED_ITEM('color',(#293727),#35593); +#293727 = PRESENTATION_STYLE_ASSIGNMENT((#293728,#293733)); +#293728 = SURFACE_STYLE_USAGE(.BOTH.,#293729); +#293729 = SURFACE_SIDE_STYLE('',(#293730)); +#293730 = SURFACE_STYLE_FILL_AREA(#293731); +#293731 = FILL_AREA_STYLE('',(#293732)); +#293732 = FILL_AREA_STYLE_COLOUR('',#285989); +#293733 = CURVE_STYLE('',#293734,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293734 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293735 = STYLED_ITEM('color',(#293736),#35610); +#293736 = PRESENTATION_STYLE_ASSIGNMENT((#293737,#293742)); +#293737 = SURFACE_STYLE_USAGE(.BOTH.,#293738); +#293738 = SURFACE_SIDE_STYLE('',(#293739)); +#293739 = SURFACE_STYLE_FILL_AREA(#293740); +#293740 = FILL_AREA_STYLE('',(#293741)); +#293741 = FILL_AREA_STYLE_COLOUR('',#285989); +#293742 = CURVE_STYLE('',#293743,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293743 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293744 = STYLED_ITEM('color',(#293745),#35622); +#293745 = PRESENTATION_STYLE_ASSIGNMENT((#293746,#293751)); +#293746 = SURFACE_STYLE_USAGE(.BOTH.,#293747); +#293747 = SURFACE_SIDE_STYLE('',(#293748)); +#293748 = SURFACE_STYLE_FILL_AREA(#293749); +#293749 = FILL_AREA_STYLE('',(#293750)); +#293750 = FILL_AREA_STYLE_COLOUR('',#285989); +#293751 = CURVE_STYLE('',#293752,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293752 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293753 = STYLED_ITEM('color',(#293754),#35639); +#293754 = PRESENTATION_STYLE_ASSIGNMENT((#293755,#293760)); +#293755 = SURFACE_STYLE_USAGE(.BOTH.,#293756); +#293756 = SURFACE_SIDE_STYLE('',(#293757)); +#293757 = SURFACE_STYLE_FILL_AREA(#293758); +#293758 = FILL_AREA_STYLE('',(#293759)); +#293759 = FILL_AREA_STYLE_COLOUR('',#285989); +#293760 = CURVE_STYLE('',#293761,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293761 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293762 = STYLED_ITEM('color',(#293763),#35656); +#293763 = PRESENTATION_STYLE_ASSIGNMENT((#293764,#293769)); +#293764 = SURFACE_STYLE_USAGE(.BOTH.,#293765); +#293765 = SURFACE_SIDE_STYLE('',(#293766)); +#293766 = SURFACE_STYLE_FILL_AREA(#293767); +#293767 = FILL_AREA_STYLE('',(#293768)); +#293768 = FILL_AREA_STYLE_COLOUR('',#285989); +#293769 = CURVE_STYLE('',#293770,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293770 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293771 = STYLED_ITEM('color',(#293772),#35668); +#293772 = PRESENTATION_STYLE_ASSIGNMENT((#293773,#293778)); +#293773 = SURFACE_STYLE_USAGE(.BOTH.,#293774); +#293774 = SURFACE_SIDE_STYLE('',(#293775)); +#293775 = SURFACE_STYLE_FILL_AREA(#293776); +#293776 = FILL_AREA_STYLE('',(#293777)); +#293777 = FILL_AREA_STYLE_COLOUR('',#285989); +#293778 = CURVE_STYLE('',#293779,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293779 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293780 = STYLED_ITEM('color',(#293781),#35685); +#293781 = PRESENTATION_STYLE_ASSIGNMENT((#293782,#293787)); +#293782 = SURFACE_STYLE_USAGE(.BOTH.,#293783); +#293783 = SURFACE_SIDE_STYLE('',(#293784)); +#293784 = SURFACE_STYLE_FILL_AREA(#293785); +#293785 = FILL_AREA_STYLE('',(#293786)); +#293786 = FILL_AREA_STYLE_COLOUR('',#285989); +#293787 = CURVE_STYLE('',#293788,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293788 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293789 = STYLED_ITEM('color',(#293790),#35702); +#293790 = PRESENTATION_STYLE_ASSIGNMENT((#293791,#293796)); +#293791 = SURFACE_STYLE_USAGE(.BOTH.,#293792); +#293792 = SURFACE_SIDE_STYLE('',(#293793)); +#293793 = SURFACE_STYLE_FILL_AREA(#293794); +#293794 = FILL_AREA_STYLE('',(#293795)); +#293795 = FILL_AREA_STYLE_COLOUR('',#285989); +#293796 = CURVE_STYLE('',#293797,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293797 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293798 = STYLED_ITEM('color',(#293799),#35714); +#293799 = PRESENTATION_STYLE_ASSIGNMENT((#293800,#293805)); +#293800 = SURFACE_STYLE_USAGE(.BOTH.,#293801); +#293801 = SURFACE_SIDE_STYLE('',(#293802)); +#293802 = SURFACE_STYLE_FILL_AREA(#293803); +#293803 = FILL_AREA_STYLE('',(#293804)); +#293804 = FILL_AREA_STYLE_COLOUR('',#285989); +#293805 = CURVE_STYLE('',#293806,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293806 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293807 = STYLED_ITEM('color',(#293808),#35731); +#293808 = PRESENTATION_STYLE_ASSIGNMENT((#293809,#293814)); +#293809 = SURFACE_STYLE_USAGE(.BOTH.,#293810); +#293810 = SURFACE_SIDE_STYLE('',(#293811)); +#293811 = SURFACE_STYLE_FILL_AREA(#293812); +#293812 = FILL_AREA_STYLE('',(#293813)); +#293813 = FILL_AREA_STYLE_COLOUR('',#285989); +#293814 = CURVE_STYLE('',#293815,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293815 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293816 = STYLED_ITEM('color',(#293817),#35748); +#293817 = PRESENTATION_STYLE_ASSIGNMENT((#293818,#293823)); +#293818 = SURFACE_STYLE_USAGE(.BOTH.,#293819); +#293819 = SURFACE_SIDE_STYLE('',(#293820)); +#293820 = SURFACE_STYLE_FILL_AREA(#293821); +#293821 = FILL_AREA_STYLE('',(#293822)); +#293822 = FILL_AREA_STYLE_COLOUR('',#285989); +#293823 = CURVE_STYLE('',#293824,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293824 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293825 = STYLED_ITEM('color',(#293826),#35760); +#293826 = PRESENTATION_STYLE_ASSIGNMENT((#293827,#293832)); +#293827 = SURFACE_STYLE_USAGE(.BOTH.,#293828); +#293828 = SURFACE_SIDE_STYLE('',(#293829)); +#293829 = SURFACE_STYLE_FILL_AREA(#293830); +#293830 = FILL_AREA_STYLE('',(#293831)); +#293831 = FILL_AREA_STYLE_COLOUR('',#285989); +#293832 = CURVE_STYLE('',#293833,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293833 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293834 = STYLED_ITEM('color',(#293835),#35777); +#293835 = PRESENTATION_STYLE_ASSIGNMENT((#293836,#293841)); +#293836 = SURFACE_STYLE_USAGE(.BOTH.,#293837); +#293837 = SURFACE_SIDE_STYLE('',(#293838)); +#293838 = SURFACE_STYLE_FILL_AREA(#293839); +#293839 = FILL_AREA_STYLE('',(#293840)); +#293840 = FILL_AREA_STYLE_COLOUR('',#285989); +#293841 = CURVE_STYLE('',#293842,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293842 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293843 = STYLED_ITEM('color',(#293844),#35794); +#293844 = PRESENTATION_STYLE_ASSIGNMENT((#293845,#293850)); +#293845 = SURFACE_STYLE_USAGE(.BOTH.,#293846); +#293846 = SURFACE_SIDE_STYLE('',(#293847)); +#293847 = SURFACE_STYLE_FILL_AREA(#293848); +#293848 = FILL_AREA_STYLE('',(#293849)); +#293849 = FILL_AREA_STYLE_COLOUR('',#285989); +#293850 = CURVE_STYLE('',#293851,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293851 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293852 = STYLED_ITEM('color',(#293853),#35806); +#293853 = PRESENTATION_STYLE_ASSIGNMENT((#293854,#293859)); +#293854 = SURFACE_STYLE_USAGE(.BOTH.,#293855); +#293855 = SURFACE_SIDE_STYLE('',(#293856)); +#293856 = SURFACE_STYLE_FILL_AREA(#293857); +#293857 = FILL_AREA_STYLE('',(#293858)); +#293858 = FILL_AREA_STYLE_COLOUR('',#285989); +#293859 = CURVE_STYLE('',#293860,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293860 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293861 = STYLED_ITEM('color',(#293862),#35823); +#293862 = PRESENTATION_STYLE_ASSIGNMENT((#293863,#293868)); +#293863 = SURFACE_STYLE_USAGE(.BOTH.,#293864); +#293864 = SURFACE_SIDE_STYLE('',(#293865)); +#293865 = SURFACE_STYLE_FILL_AREA(#293866); +#293866 = FILL_AREA_STYLE('',(#293867)); +#293867 = FILL_AREA_STYLE_COLOUR('',#285989); +#293868 = CURVE_STYLE('',#293869,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293869 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293870 = STYLED_ITEM('color',(#293871),#35840); +#293871 = PRESENTATION_STYLE_ASSIGNMENT((#293872,#293877)); +#293872 = SURFACE_STYLE_USAGE(.BOTH.,#293873); +#293873 = SURFACE_SIDE_STYLE('',(#293874)); +#293874 = SURFACE_STYLE_FILL_AREA(#293875); +#293875 = FILL_AREA_STYLE('',(#293876)); +#293876 = FILL_AREA_STYLE_COLOUR('',#285989); +#293877 = CURVE_STYLE('',#293878,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293878 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293879 = STYLED_ITEM('color',(#293880),#35852); +#293880 = PRESENTATION_STYLE_ASSIGNMENT((#293881,#293886)); +#293881 = SURFACE_STYLE_USAGE(.BOTH.,#293882); +#293882 = SURFACE_SIDE_STYLE('',(#293883)); +#293883 = SURFACE_STYLE_FILL_AREA(#293884); +#293884 = FILL_AREA_STYLE('',(#293885)); +#293885 = FILL_AREA_STYLE_COLOUR('',#285989); +#293886 = CURVE_STYLE('',#293887,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293887 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293888 = STYLED_ITEM('color',(#293889),#35869); +#293889 = PRESENTATION_STYLE_ASSIGNMENT((#293890,#293895)); +#293890 = SURFACE_STYLE_USAGE(.BOTH.,#293891); +#293891 = SURFACE_SIDE_STYLE('',(#293892)); +#293892 = SURFACE_STYLE_FILL_AREA(#293893); +#293893 = FILL_AREA_STYLE('',(#293894)); +#293894 = FILL_AREA_STYLE_COLOUR('',#285989); +#293895 = CURVE_STYLE('',#293896,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293896 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293897 = STYLED_ITEM('color',(#293898),#35886); +#293898 = PRESENTATION_STYLE_ASSIGNMENT((#293899,#293904)); +#293899 = SURFACE_STYLE_USAGE(.BOTH.,#293900); +#293900 = SURFACE_SIDE_STYLE('',(#293901)); +#293901 = SURFACE_STYLE_FILL_AREA(#293902); +#293902 = FILL_AREA_STYLE('',(#293903)); +#293903 = FILL_AREA_STYLE_COLOUR('',#285989); +#293904 = CURVE_STYLE('',#293905,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293905 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293906 = STYLED_ITEM('color',(#293907),#35898); +#293907 = PRESENTATION_STYLE_ASSIGNMENT((#293908,#293913)); +#293908 = SURFACE_STYLE_USAGE(.BOTH.,#293909); +#293909 = SURFACE_SIDE_STYLE('',(#293910)); +#293910 = SURFACE_STYLE_FILL_AREA(#293911); +#293911 = FILL_AREA_STYLE('',(#293912)); +#293912 = FILL_AREA_STYLE_COLOUR('',#285989); +#293913 = CURVE_STYLE('',#293914,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293914 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293915 = STYLED_ITEM('color',(#293916),#35915); +#293916 = PRESENTATION_STYLE_ASSIGNMENT((#293917,#293922)); +#293917 = SURFACE_STYLE_USAGE(.BOTH.,#293918); +#293918 = SURFACE_SIDE_STYLE('',(#293919)); +#293919 = SURFACE_STYLE_FILL_AREA(#293920); +#293920 = FILL_AREA_STYLE('',(#293921)); +#293921 = FILL_AREA_STYLE_COLOUR('',#285989); +#293922 = CURVE_STYLE('',#293923,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293923 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293924 = STYLED_ITEM('color',(#293925),#35932); +#293925 = PRESENTATION_STYLE_ASSIGNMENT((#293926,#293931)); +#293926 = SURFACE_STYLE_USAGE(.BOTH.,#293927); +#293927 = SURFACE_SIDE_STYLE('',(#293928)); +#293928 = SURFACE_STYLE_FILL_AREA(#293929); +#293929 = FILL_AREA_STYLE('',(#293930)); +#293930 = FILL_AREA_STYLE_COLOUR('',#285989); +#293931 = CURVE_STYLE('',#293932,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293932 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293933 = STYLED_ITEM('color',(#293934),#35944); +#293934 = PRESENTATION_STYLE_ASSIGNMENT((#293935,#293940)); +#293935 = SURFACE_STYLE_USAGE(.BOTH.,#293936); +#293936 = SURFACE_SIDE_STYLE('',(#293937)); +#293937 = SURFACE_STYLE_FILL_AREA(#293938); +#293938 = FILL_AREA_STYLE('',(#293939)); +#293939 = FILL_AREA_STYLE_COLOUR('',#285989); +#293940 = CURVE_STYLE('',#293941,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293941 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293942 = STYLED_ITEM('color',(#293943),#35961); +#293943 = PRESENTATION_STYLE_ASSIGNMENT((#293944,#293949)); +#293944 = SURFACE_STYLE_USAGE(.BOTH.,#293945); +#293945 = SURFACE_SIDE_STYLE('',(#293946)); +#293946 = SURFACE_STYLE_FILL_AREA(#293947); +#293947 = FILL_AREA_STYLE('',(#293948)); +#293948 = FILL_AREA_STYLE_COLOUR('',#285989); +#293949 = CURVE_STYLE('',#293950,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293950 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293951 = STYLED_ITEM('color',(#293952),#35978); +#293952 = PRESENTATION_STYLE_ASSIGNMENT((#293953,#293958)); +#293953 = SURFACE_STYLE_USAGE(.BOTH.,#293954); +#293954 = SURFACE_SIDE_STYLE('',(#293955)); +#293955 = SURFACE_STYLE_FILL_AREA(#293956); +#293956 = FILL_AREA_STYLE('',(#293957)); +#293957 = FILL_AREA_STYLE_COLOUR('',#285989); +#293958 = CURVE_STYLE('',#293959,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293959 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293960 = STYLED_ITEM('color',(#293961),#35990); +#293961 = PRESENTATION_STYLE_ASSIGNMENT((#293962,#293967)); +#293962 = SURFACE_STYLE_USAGE(.BOTH.,#293963); +#293963 = SURFACE_SIDE_STYLE('',(#293964)); +#293964 = SURFACE_STYLE_FILL_AREA(#293965); +#293965 = FILL_AREA_STYLE('',(#293966)); +#293966 = FILL_AREA_STYLE_COLOUR('',#285989); +#293967 = CURVE_STYLE('',#293968,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293968 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293969 = STYLED_ITEM('color',(#293970),#36007); +#293970 = PRESENTATION_STYLE_ASSIGNMENT((#293971,#293976)); +#293971 = SURFACE_STYLE_USAGE(.BOTH.,#293972); +#293972 = SURFACE_SIDE_STYLE('',(#293973)); +#293973 = SURFACE_STYLE_FILL_AREA(#293974); +#293974 = FILL_AREA_STYLE('',(#293975)); +#293975 = FILL_AREA_STYLE_COLOUR('',#285989); +#293976 = CURVE_STYLE('',#293977,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293977 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293978 = STYLED_ITEM('color',(#293979),#36024); +#293979 = PRESENTATION_STYLE_ASSIGNMENT((#293980,#293985)); +#293980 = SURFACE_STYLE_USAGE(.BOTH.,#293981); +#293981 = SURFACE_SIDE_STYLE('',(#293982)); +#293982 = SURFACE_STYLE_FILL_AREA(#293983); +#293983 = FILL_AREA_STYLE('',(#293984)); +#293984 = FILL_AREA_STYLE_COLOUR('',#285989); +#293985 = CURVE_STYLE('',#293986,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293986 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293987 = STYLED_ITEM('color',(#293988),#36036); +#293988 = PRESENTATION_STYLE_ASSIGNMENT((#293989,#293994)); +#293989 = SURFACE_STYLE_USAGE(.BOTH.,#293990); +#293990 = SURFACE_SIDE_STYLE('',(#293991)); +#293991 = SURFACE_STYLE_FILL_AREA(#293992); +#293992 = FILL_AREA_STYLE('',(#293993)); +#293993 = FILL_AREA_STYLE_COLOUR('',#285989); +#293994 = CURVE_STYLE('',#293995,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#293995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#293996 = STYLED_ITEM('color',(#293997),#36053); +#293997 = PRESENTATION_STYLE_ASSIGNMENT((#293998,#294003)); +#293998 = SURFACE_STYLE_USAGE(.BOTH.,#293999); +#293999 = SURFACE_SIDE_STYLE('',(#294000)); +#294000 = SURFACE_STYLE_FILL_AREA(#294001); +#294001 = FILL_AREA_STYLE('',(#294002)); +#294002 = FILL_AREA_STYLE_COLOUR('',#285989); +#294003 = CURVE_STYLE('',#294004,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#294004 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294005 = STYLED_ITEM('color',(#294006),#36070); +#294006 = PRESENTATION_STYLE_ASSIGNMENT((#294007,#294012)); +#294007 = SURFACE_STYLE_USAGE(.BOTH.,#294008); +#294008 = SURFACE_SIDE_STYLE('',(#294009)); +#294009 = SURFACE_STYLE_FILL_AREA(#294010); +#294010 = FILL_AREA_STYLE('',(#294011)); +#294011 = FILL_AREA_STYLE_COLOUR('',#285989); +#294012 = CURVE_STYLE('',#294013,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#294013 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294014 = STYLED_ITEM('color',(#294015),#36082); +#294015 = PRESENTATION_STYLE_ASSIGNMENT((#294016,#294021)); +#294016 = SURFACE_STYLE_USAGE(.BOTH.,#294017); +#294017 = SURFACE_SIDE_STYLE('',(#294018)); +#294018 = SURFACE_STYLE_FILL_AREA(#294019); +#294019 = FILL_AREA_STYLE('',(#294020)); +#294020 = FILL_AREA_STYLE_COLOUR('',#285989); +#294021 = CURVE_STYLE('',#294022,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#294022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294023 = STYLED_ITEM('color',(#294024),#36099); +#294024 = PRESENTATION_STYLE_ASSIGNMENT((#294025,#294030)); +#294025 = SURFACE_STYLE_USAGE(.BOTH.,#294026); +#294026 = SURFACE_SIDE_STYLE('',(#294027)); +#294027 = SURFACE_STYLE_FILL_AREA(#294028); +#294028 = FILL_AREA_STYLE('',(#294029)); +#294029 = FILL_AREA_STYLE_COLOUR('',#285989); +#294030 = CURVE_STYLE('',#294031,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#294031 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294032 = STYLED_ITEM('color',(#294033),#36116); +#294033 = PRESENTATION_STYLE_ASSIGNMENT((#294034,#294039)); +#294034 = SURFACE_STYLE_USAGE(.BOTH.,#294035); +#294035 = SURFACE_SIDE_STYLE('',(#294036)); +#294036 = SURFACE_STYLE_FILL_AREA(#294037); +#294037 = FILL_AREA_STYLE('',(#294038)); +#294038 = FILL_AREA_STYLE_COLOUR('',#285989); +#294039 = CURVE_STYLE('',#294040,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#294040 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294041 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #294042,#294051,#294060,#294069,#294078,#294087,#294096,#294105, + #294114,#294123,#294132,#294141,#294150,#294159,#294168,#294177, + #294186,#294195,#294204,#294213,#294222,#294231,#294240,#294249, + #294258,#294267,#294276,#294285,#294294,#294303,#294312,#294321, + #294330,#294339,#294348,#294357,#294366,#294375,#294384,#294393, + #294402,#294411,#294420,#294429,#294438,#294447,#294456,#294465, + #294474,#294483,#294492,#294501,#294510,#294519,#294528,#294537, + #294546,#294555,#294564,#294573,#294582,#294591,#294600,#294609, + #294618,#294627,#294636,#294645,#294654,#294663,#294672,#294681, + #294690,#294699,#294708,#294717,#294726,#294735,#294744,#294753, + #294762,#294771,#294780,#294789,#294798,#294807,#294816,#294825, + #294834,#294843,#294852,#294861,#294870,#294879,#294888,#294897, + #294906,#294915,#294924,#294933,#294942,#294951,#294960,#294969, + #294978,#294987,#294996,#295005,#295014,#295023,#295032,#295041, + #295050,#295059,#295068,#295077,#295086,#295095,#295104,#295113, + #295122,#295131,#295140,#295149,#295158,#295167,#295176,#295185, + #295194,#295203,#295212,#295221,#295230,#295239,#295248,#295257, + #295266,#295275,#295284,#295293,#295302,#295311,#295320,#295329, + #295338,#295347,#295356),#42682); +#294042 = STYLED_ITEM('color',(#294043),#38216); +#294043 = PRESENTATION_STYLE_ASSIGNMENT((#294044,#294049)); +#294044 = SURFACE_STYLE_USAGE(.BOTH.,#294045); +#294045 = SURFACE_SIDE_STYLE('',(#294046)); +#294046 = SURFACE_STYLE_FILL_AREA(#294047); +#294047 = FILL_AREA_STYLE('',(#294048)); +#294048 = FILL_AREA_STYLE_COLOUR('',#270350); +#294049 = CURVE_STYLE('',#294050,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294050 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294051 = STYLED_ITEM('color',(#294052),#38254); +#294052 = PRESENTATION_STYLE_ASSIGNMENT((#294053,#294058)); +#294053 = SURFACE_STYLE_USAGE(.BOTH.,#294054); +#294054 = SURFACE_SIDE_STYLE('',(#294055)); +#294055 = SURFACE_STYLE_FILL_AREA(#294056); +#294056 = FILL_AREA_STYLE('',(#294057)); +#294057 = FILL_AREA_STYLE_COLOUR('',#270350); +#294058 = CURVE_STYLE('',#294059,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294059 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294060 = STYLED_ITEM('color',(#294061),#38317); +#294061 = PRESENTATION_STYLE_ASSIGNMENT((#294062,#294067)); +#294062 = SURFACE_STYLE_USAGE(.BOTH.,#294063); +#294063 = SURFACE_SIDE_STYLE('',(#294064)); +#294064 = SURFACE_STYLE_FILL_AREA(#294065); +#294065 = FILL_AREA_STYLE('',(#294066)); +#294066 = FILL_AREA_STYLE_COLOUR('',#270350); +#294067 = CURVE_STYLE('',#294068,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294068 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294069 = STYLED_ITEM('color',(#294070),#38340); +#294070 = PRESENTATION_STYLE_ASSIGNMENT((#294071,#294076)); +#294071 = SURFACE_STYLE_USAGE(.BOTH.,#294072); +#294072 = SURFACE_SIDE_STYLE('',(#294073)); +#294073 = SURFACE_STYLE_FILL_AREA(#294074); +#294074 = FILL_AREA_STYLE('',(#294075)); +#294075 = FILL_AREA_STYLE_COLOUR('',#270350); +#294076 = CURVE_STYLE('',#294077,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294077 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294078 = STYLED_ITEM('color',(#294079),#38369); +#294079 = PRESENTATION_STYLE_ASSIGNMENT((#294080,#294085)); +#294080 = SURFACE_STYLE_USAGE(.BOTH.,#294081); +#294081 = SURFACE_SIDE_STYLE('',(#294082)); +#294082 = SURFACE_STYLE_FILL_AREA(#294083); +#294083 = FILL_AREA_STYLE('',(#294084)); +#294084 = FILL_AREA_STYLE_COLOUR('',#270350); +#294085 = CURVE_STYLE('',#294086,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294086 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294087 = STYLED_ITEM('color',(#294088),#38392); +#294088 = PRESENTATION_STYLE_ASSIGNMENT((#294089,#294094)); +#294089 = SURFACE_STYLE_USAGE(.BOTH.,#294090); +#294090 = SURFACE_SIDE_STYLE('',(#294091)); +#294091 = SURFACE_STYLE_FILL_AREA(#294092); +#294092 = FILL_AREA_STYLE('',(#294093)); +#294093 = FILL_AREA_STYLE_COLOUR('',#270350); +#294094 = CURVE_STYLE('',#294095,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294095 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294096 = STYLED_ITEM('color',(#294097),#38479); +#294097 = PRESENTATION_STYLE_ASSIGNMENT((#294098,#294103)); +#294098 = SURFACE_STYLE_USAGE(.BOTH.,#294099); +#294099 = SURFACE_SIDE_STYLE('',(#294100)); +#294100 = SURFACE_STYLE_FILL_AREA(#294101); +#294101 = FILL_AREA_STYLE('',(#294102)); +#294102 = FILL_AREA_STYLE_COLOUR('',#270350); +#294103 = CURVE_STYLE('',#294104,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294104 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294105 = STYLED_ITEM('color',(#294106),#38566); +#294106 = PRESENTATION_STYLE_ASSIGNMENT((#294107,#294112)); +#294107 = SURFACE_STYLE_USAGE(.BOTH.,#294108); +#294108 = SURFACE_SIDE_STYLE('',(#294109)); +#294109 = SURFACE_STYLE_FILL_AREA(#294110); +#294110 = FILL_AREA_STYLE('',(#294111)); +#294111 = FILL_AREA_STYLE_COLOUR('',#270350); +#294112 = CURVE_STYLE('',#294113,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294113 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294114 = STYLED_ITEM('color',(#294115),#38589); +#294115 = PRESENTATION_STYLE_ASSIGNMENT((#294116,#294121)); +#294116 = SURFACE_STYLE_USAGE(.BOTH.,#294117); +#294117 = SURFACE_SIDE_STYLE('',(#294118)); +#294118 = SURFACE_STYLE_FILL_AREA(#294119); +#294119 = FILL_AREA_STYLE('',(#294120)); +#294120 = FILL_AREA_STYLE_COLOUR('',#270350); +#294121 = CURVE_STYLE('',#294122,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294122 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294123 = STYLED_ITEM('color',(#294124),#38612); +#294124 = PRESENTATION_STYLE_ASSIGNMENT((#294125,#294130)); +#294125 = SURFACE_STYLE_USAGE(.BOTH.,#294126); +#294126 = SURFACE_SIDE_STYLE('',(#294127)); +#294127 = SURFACE_STYLE_FILL_AREA(#294128); +#294128 = FILL_AREA_STYLE('',(#294129)); +#294129 = FILL_AREA_STYLE_COLOUR('',#270350); +#294130 = CURVE_STYLE('',#294131,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294131 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294132 = STYLED_ITEM('color',(#294133),#38629); +#294133 = PRESENTATION_STYLE_ASSIGNMENT((#294134,#294139)); +#294134 = SURFACE_STYLE_USAGE(.BOTH.,#294135); +#294135 = SURFACE_SIDE_STYLE('',(#294136)); +#294136 = SURFACE_STYLE_FILL_AREA(#294137); +#294137 = FILL_AREA_STYLE('',(#294138)); +#294138 = FILL_AREA_STYLE_COLOUR('',#270350); +#294139 = CURVE_STYLE('',#294140,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294140 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294141 = STYLED_ITEM('color',(#294142),#38652); +#294142 = PRESENTATION_STYLE_ASSIGNMENT((#294143,#294148)); +#294143 = SURFACE_STYLE_USAGE(.BOTH.,#294144); +#294144 = SURFACE_SIDE_STYLE('',(#294145)); +#294145 = SURFACE_STYLE_FILL_AREA(#294146); +#294146 = FILL_AREA_STYLE('',(#294147)); +#294147 = FILL_AREA_STYLE_COLOUR('',#270350); +#294148 = CURVE_STYLE('',#294149,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294149 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294150 = STYLED_ITEM('color',(#294151),#38740); +#294151 = PRESENTATION_STYLE_ASSIGNMENT((#294152,#294157)); +#294152 = SURFACE_STYLE_USAGE(.BOTH.,#294153); +#294153 = SURFACE_SIDE_STYLE('',(#294154)); +#294154 = SURFACE_STYLE_FILL_AREA(#294155); +#294155 = FILL_AREA_STYLE('',(#294156)); +#294156 = FILL_AREA_STYLE_COLOUR('',#270350); +#294157 = CURVE_STYLE('',#294158,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294158 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294159 = STYLED_ITEM('color',(#294160),#38756); +#294160 = PRESENTATION_STYLE_ASSIGNMENT((#294161,#294166)); +#294161 = SURFACE_STYLE_USAGE(.BOTH.,#294162); +#294162 = SURFACE_SIDE_STYLE('',(#294163)); +#294163 = SURFACE_STYLE_FILL_AREA(#294164); +#294164 = FILL_AREA_STYLE('',(#294165)); +#294165 = FILL_AREA_STYLE_COLOUR('',#270350); +#294166 = CURVE_STYLE('',#294167,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294167 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294168 = STYLED_ITEM('color',(#294169),#38786); +#294169 = PRESENTATION_STYLE_ASSIGNMENT((#294170,#294175)); +#294170 = SURFACE_STYLE_USAGE(.BOTH.,#294171); +#294171 = SURFACE_SIDE_STYLE('',(#294172)); +#294172 = SURFACE_STYLE_FILL_AREA(#294173); +#294173 = FILL_AREA_STYLE('',(#294174)); +#294174 = FILL_AREA_STYLE_COLOUR('',#270441); +#294175 = CURVE_STYLE('',#294176,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294176 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294177 = STYLED_ITEM('color',(#294178),#38817); +#294178 = PRESENTATION_STYLE_ASSIGNMENT((#294179,#294184)); +#294179 = SURFACE_STYLE_USAGE(.BOTH.,#294180); +#294180 = SURFACE_SIDE_STYLE('',(#294181)); +#294181 = SURFACE_STYLE_FILL_AREA(#294182); +#294182 = FILL_AREA_STYLE('',(#294183)); +#294183 = FILL_AREA_STYLE_COLOUR('',#270350); +#294184 = CURVE_STYLE('',#294185,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294185 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294186 = STYLED_ITEM('color',(#294187),#38848); +#294187 = PRESENTATION_STYLE_ASSIGNMENT((#294188,#294193)); +#294188 = SURFACE_STYLE_USAGE(.BOTH.,#294189); +#294189 = SURFACE_SIDE_STYLE('',(#294190)); +#294190 = SURFACE_STYLE_FILL_AREA(#294191); +#294191 = FILL_AREA_STYLE('',(#294192)); +#294192 = FILL_AREA_STYLE_COLOUR('',#270441); +#294193 = CURVE_STYLE('',#294194,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294194 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294195 = STYLED_ITEM('color',(#294196),#38879); +#294196 = PRESENTATION_STYLE_ASSIGNMENT((#294197,#294202)); +#294197 = SURFACE_STYLE_USAGE(.BOTH.,#294198); +#294198 = SURFACE_SIDE_STYLE('',(#294199)); +#294199 = SURFACE_STYLE_FILL_AREA(#294200); +#294200 = FILL_AREA_STYLE('',(#294201)); +#294201 = FILL_AREA_STYLE_COLOUR('',#270350); +#294202 = CURVE_STYLE('',#294203,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294203 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294204 = STYLED_ITEM('color',(#294205),#38910); +#294205 = PRESENTATION_STYLE_ASSIGNMENT((#294206,#294211)); +#294206 = SURFACE_STYLE_USAGE(.BOTH.,#294207); +#294207 = SURFACE_SIDE_STYLE('',(#294208)); +#294208 = SURFACE_STYLE_FILL_AREA(#294209); +#294209 = FILL_AREA_STYLE('',(#294210)); +#294210 = FILL_AREA_STYLE_COLOUR('',#270441); +#294211 = CURVE_STYLE('',#294212,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294212 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294213 = STYLED_ITEM('color',(#294214),#38941); +#294214 = PRESENTATION_STYLE_ASSIGNMENT((#294215,#294220)); +#294215 = SURFACE_STYLE_USAGE(.BOTH.,#294216); +#294216 = SURFACE_SIDE_STYLE('',(#294217)); +#294217 = SURFACE_STYLE_FILL_AREA(#294218); +#294218 = FILL_AREA_STYLE('',(#294219)); +#294219 = FILL_AREA_STYLE_COLOUR('',#270350); +#294220 = CURVE_STYLE('',#294221,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294221 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294222 = STYLED_ITEM('color',(#294223),#38972); +#294223 = PRESENTATION_STYLE_ASSIGNMENT((#294224,#294229)); +#294224 = SURFACE_STYLE_USAGE(.BOTH.,#294225); +#294225 = SURFACE_SIDE_STYLE('',(#294226)); +#294226 = SURFACE_STYLE_FILL_AREA(#294227); +#294227 = FILL_AREA_STYLE('',(#294228)); +#294228 = FILL_AREA_STYLE_COLOUR('',#270441); +#294229 = CURVE_STYLE('',#294230,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294230 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294231 = STYLED_ITEM('color',(#294232),#39003); +#294232 = PRESENTATION_STYLE_ASSIGNMENT((#294233,#294238)); +#294233 = SURFACE_STYLE_USAGE(.BOTH.,#294234); +#294234 = SURFACE_SIDE_STYLE('',(#294235)); +#294235 = SURFACE_STYLE_FILL_AREA(#294236); +#294236 = FILL_AREA_STYLE('',(#294237)); +#294237 = FILL_AREA_STYLE_COLOUR('',#270350); +#294238 = CURVE_STYLE('',#294239,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294239 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294240 = STYLED_ITEM('color',(#294241),#39020); +#294241 = PRESENTATION_STYLE_ASSIGNMENT((#294242,#294247)); +#294242 = SURFACE_STYLE_USAGE(.BOTH.,#294243); +#294243 = SURFACE_SIDE_STYLE('',(#294244)); +#294244 = SURFACE_STYLE_FILL_AREA(#294245); +#294245 = FILL_AREA_STYLE('',(#294246)); +#294246 = FILL_AREA_STYLE_COLOUR('',#270350); +#294247 = CURVE_STYLE('',#294248,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294248 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294249 = STYLED_ITEM('color',(#294250),#39037); +#294250 = PRESENTATION_STYLE_ASSIGNMENT((#294251,#294256)); +#294251 = SURFACE_STYLE_USAGE(.BOTH.,#294252); +#294252 = SURFACE_SIDE_STYLE('',(#294253)); +#294253 = SURFACE_STYLE_FILL_AREA(#294254); +#294254 = FILL_AREA_STYLE('',(#294255)); +#294255 = FILL_AREA_STYLE_COLOUR('',#270441); +#294256 = CURVE_STYLE('',#294257,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294257 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294258 = STYLED_ITEM('color',(#294259),#39068); +#294259 = PRESENTATION_STYLE_ASSIGNMENT((#294260,#294265)); +#294260 = SURFACE_STYLE_USAGE(.BOTH.,#294261); +#294261 = SURFACE_SIDE_STYLE('',(#294262)); +#294262 = SURFACE_STYLE_FILL_AREA(#294263); +#294263 = FILL_AREA_STYLE('',(#294264)); +#294264 = FILL_AREA_STYLE_COLOUR('',#270350); +#294265 = CURVE_STYLE('',#294266,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294266 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294267 = STYLED_ITEM('color',(#294268),#39099); +#294268 = PRESENTATION_STYLE_ASSIGNMENT((#294269,#294274)); +#294269 = SURFACE_STYLE_USAGE(.BOTH.,#294270); +#294270 = SURFACE_SIDE_STYLE('',(#294271)); +#294271 = SURFACE_STYLE_FILL_AREA(#294272); +#294272 = FILL_AREA_STYLE('',(#294273)); +#294273 = FILL_AREA_STYLE_COLOUR('',#270441); +#294274 = CURVE_STYLE('',#294275,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294275 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294276 = STYLED_ITEM('color',(#294277),#39130); +#294277 = PRESENTATION_STYLE_ASSIGNMENT((#294278,#294283)); +#294278 = SURFACE_STYLE_USAGE(.BOTH.,#294279); +#294279 = SURFACE_SIDE_STYLE('',(#294280)); +#294280 = SURFACE_STYLE_FILL_AREA(#294281); +#294281 = FILL_AREA_STYLE('',(#294282)); +#294282 = FILL_AREA_STYLE_COLOUR('',#270350); +#294283 = CURVE_STYLE('',#294284,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294284 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294285 = STYLED_ITEM('color',(#294286),#39161); +#294286 = PRESENTATION_STYLE_ASSIGNMENT((#294287,#294292)); +#294287 = SURFACE_STYLE_USAGE(.BOTH.,#294288); +#294288 = SURFACE_SIDE_STYLE('',(#294289)); +#294289 = SURFACE_STYLE_FILL_AREA(#294290); +#294290 = FILL_AREA_STYLE('',(#294291)); +#294291 = FILL_AREA_STYLE_COLOUR('',#270441); +#294292 = CURVE_STYLE('',#294293,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294293 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294294 = STYLED_ITEM('color',(#294295),#39192); +#294295 = PRESENTATION_STYLE_ASSIGNMENT((#294296,#294301)); +#294296 = SURFACE_STYLE_USAGE(.BOTH.,#294297); +#294297 = SURFACE_SIDE_STYLE('',(#294298)); +#294298 = SURFACE_STYLE_FILL_AREA(#294299); +#294299 = FILL_AREA_STYLE('',(#294300)); +#294300 = FILL_AREA_STYLE_COLOUR('',#270350); +#294301 = CURVE_STYLE('',#294302,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294302 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294303 = STYLED_ITEM('color',(#294304),#39223); +#294304 = PRESENTATION_STYLE_ASSIGNMENT((#294305,#294310)); +#294305 = SURFACE_STYLE_USAGE(.BOTH.,#294306); +#294306 = SURFACE_SIDE_STYLE('',(#294307)); +#294307 = SURFACE_STYLE_FILL_AREA(#294308); +#294308 = FILL_AREA_STYLE('',(#294309)); +#294309 = FILL_AREA_STYLE_COLOUR('',#270441); +#294310 = CURVE_STYLE('',#294311,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294311 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294312 = STYLED_ITEM('color',(#294313),#39254); +#294313 = PRESENTATION_STYLE_ASSIGNMENT((#294314,#294319)); +#294314 = SURFACE_STYLE_USAGE(.BOTH.,#294315); +#294315 = SURFACE_SIDE_STYLE('',(#294316)); +#294316 = SURFACE_STYLE_FILL_AREA(#294317); +#294317 = FILL_AREA_STYLE('',(#294318)); +#294318 = FILL_AREA_STYLE_COLOUR('',#270350); +#294319 = CURVE_STYLE('',#294320,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294320 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294321 = STYLED_ITEM('color',(#294322),#39284); +#294322 = PRESENTATION_STYLE_ASSIGNMENT((#294323,#294328)); +#294323 = SURFACE_STYLE_USAGE(.BOTH.,#294324); +#294324 = SURFACE_SIDE_STYLE('',(#294325)); +#294325 = SURFACE_STYLE_FILL_AREA(#294326); +#294326 = FILL_AREA_STYLE('',(#294327)); +#294327 = FILL_AREA_STYLE_COLOUR('',#270350); +#294328 = CURVE_STYLE('',#294329,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294329 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294330 = STYLED_ITEM('color',(#294331),#39307); +#294331 = PRESENTATION_STYLE_ASSIGNMENT((#294332,#294337)); +#294332 = SURFACE_STYLE_USAGE(.BOTH.,#294333); +#294333 = SURFACE_SIDE_STYLE('',(#294334)); +#294334 = SURFACE_STYLE_FILL_AREA(#294335); +#294335 = FILL_AREA_STYLE('',(#294336)); +#294336 = FILL_AREA_STYLE_COLOUR('',#270350); +#294337 = CURVE_STYLE('',#294338,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294338 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294339 = STYLED_ITEM('color',(#294340),#39330); +#294340 = PRESENTATION_STYLE_ASSIGNMENT((#294341,#294346)); +#294341 = SURFACE_STYLE_USAGE(.BOTH.,#294342); +#294342 = SURFACE_SIDE_STYLE('',(#294343)); +#294343 = SURFACE_STYLE_FILL_AREA(#294344); +#294344 = FILL_AREA_STYLE('',(#294345)); +#294345 = FILL_AREA_STYLE_COLOUR('',#270350); +#294346 = CURVE_STYLE('',#294347,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294347 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294348 = STYLED_ITEM('color',(#294349),#39347); +#294349 = PRESENTATION_STYLE_ASSIGNMENT((#294350,#294355)); +#294350 = SURFACE_STYLE_USAGE(.BOTH.,#294351); +#294351 = SURFACE_SIDE_STYLE('',(#294352)); +#294352 = SURFACE_STYLE_FILL_AREA(#294353); +#294353 = FILL_AREA_STYLE('',(#294354)); +#294354 = FILL_AREA_STYLE_COLOUR('',#270441); +#294355 = CURVE_STYLE('',#294356,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294356 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294357 = STYLED_ITEM('color',(#294358),#39392); +#294358 = PRESENTATION_STYLE_ASSIGNMENT((#294359,#294364)); +#294359 = SURFACE_STYLE_USAGE(.BOTH.,#294360); +#294360 = SURFACE_SIDE_STYLE('',(#294361)); +#294361 = SURFACE_STYLE_FILL_AREA(#294362); +#294362 = FILL_AREA_STYLE('',(#294363)); +#294363 = FILL_AREA_STYLE_COLOUR('',#270350); +#294364 = CURVE_STYLE('',#294365,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294365 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294366 = STYLED_ITEM('color',(#294367),#39478); +#294367 = PRESENTATION_STYLE_ASSIGNMENT((#294368,#294373)); +#294368 = SURFACE_STYLE_USAGE(.BOTH.,#294369); +#294369 = SURFACE_SIDE_STYLE('',(#294370)); +#294370 = SURFACE_STYLE_FILL_AREA(#294371); +#294371 = FILL_AREA_STYLE('',(#294372)); +#294372 = FILL_AREA_STYLE_COLOUR('',#270350); +#294373 = CURVE_STYLE('',#294374,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294374 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294375 = STYLED_ITEM('color',(#294376),#39501); +#294376 = PRESENTATION_STYLE_ASSIGNMENT((#294377,#294382)); +#294377 = SURFACE_STYLE_USAGE(.BOTH.,#294378); +#294378 = SURFACE_SIDE_STYLE('',(#294379)); +#294379 = SURFACE_STYLE_FILL_AREA(#294380); +#294380 = FILL_AREA_STYLE('',(#294381)); +#294381 = FILL_AREA_STYLE_COLOUR('',#270350); +#294382 = CURVE_STYLE('',#294383,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294383 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294384 = STYLED_ITEM('color',(#294385),#39524); +#294385 = PRESENTATION_STYLE_ASSIGNMENT((#294386,#294391)); +#294386 = SURFACE_STYLE_USAGE(.BOTH.,#294387); +#294387 = SURFACE_SIDE_STYLE('',(#294388)); +#294388 = SURFACE_STYLE_FILL_AREA(#294389); +#294389 = FILL_AREA_STYLE('',(#294390)); +#294390 = FILL_AREA_STYLE_COLOUR('',#270350); +#294391 = CURVE_STYLE('',#294392,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294392 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294393 = STYLED_ITEM('color',(#294394),#39547); +#294394 = PRESENTATION_STYLE_ASSIGNMENT((#294395,#294400)); +#294395 = SURFACE_STYLE_USAGE(.BOTH.,#294396); +#294396 = SURFACE_SIDE_STYLE('',(#294397)); +#294397 = SURFACE_STYLE_FILL_AREA(#294398); +#294398 = FILL_AREA_STYLE('',(#294399)); +#294399 = FILL_AREA_STYLE_COLOUR('',#270350); +#294400 = CURVE_STYLE('',#294401,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294401 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294402 = STYLED_ITEM('color',(#294403),#39634); +#294403 = PRESENTATION_STYLE_ASSIGNMENT((#294404,#294409)); +#294404 = SURFACE_STYLE_USAGE(.BOTH.,#294405); +#294405 = SURFACE_SIDE_STYLE('',(#294406)); +#294406 = SURFACE_STYLE_FILL_AREA(#294407); +#294407 = FILL_AREA_STYLE('',(#294408)); +#294408 = FILL_AREA_STYLE_COLOUR('',#270441); +#294409 = CURVE_STYLE('',#294410,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294410 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294411 = STYLED_ITEM('color',(#294412),#39672); +#294412 = PRESENTATION_STYLE_ASSIGNMENT((#294413,#294418)); +#294413 = SURFACE_STYLE_USAGE(.BOTH.,#294414); +#294414 = SURFACE_SIDE_STYLE('',(#294415)); +#294415 = SURFACE_STYLE_FILL_AREA(#294416); +#294416 = FILL_AREA_STYLE('',(#294417)); +#294417 = FILL_AREA_STYLE_COLOUR('',#270350); +#294418 = CURVE_STYLE('',#294419,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294419 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294420 = STYLED_ITEM('color',(#294421),#39721); +#294421 = PRESENTATION_STYLE_ASSIGNMENT((#294422,#294427)); +#294422 = SURFACE_STYLE_USAGE(.BOTH.,#294423); +#294423 = SURFACE_SIDE_STYLE('',(#294424)); +#294424 = SURFACE_STYLE_FILL_AREA(#294425); +#294425 = FILL_AREA_STYLE('',(#294426)); +#294426 = FILL_AREA_STYLE_COLOUR('',#270441); +#294427 = CURVE_STYLE('',#294428,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294428 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294429 = STYLED_ITEM('color',(#294430),#39813); +#294430 = PRESENTATION_STYLE_ASSIGNMENT((#294431,#294436)); +#294431 = SURFACE_STYLE_USAGE(.BOTH.,#294432); +#294432 = SURFACE_SIDE_STYLE('',(#294433)); +#294433 = SURFACE_STYLE_FILL_AREA(#294434); +#294434 = FILL_AREA_STYLE('',(#294435)); +#294435 = FILL_AREA_STYLE_COLOUR('',#270441); +#294436 = CURVE_STYLE('',#294437,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294437 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294438 = STYLED_ITEM('color',(#294439),#39838); +#294439 = PRESENTATION_STYLE_ASSIGNMENT((#294440,#294445)); +#294440 = SURFACE_STYLE_USAGE(.BOTH.,#294441); +#294441 = SURFACE_SIDE_STYLE('',(#294442)); +#294442 = SURFACE_STYLE_FILL_AREA(#294443); +#294443 = FILL_AREA_STYLE('',(#294444)); +#294444 = FILL_AREA_STYLE_COLOUR('',#270441); +#294445 = CURVE_STYLE('',#294446,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294446 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294447 = STYLED_ITEM('color',(#294448),#39922); +#294448 = PRESENTATION_STYLE_ASSIGNMENT((#294449,#294454)); +#294449 = SURFACE_STYLE_USAGE(.BOTH.,#294450); +#294450 = SURFACE_SIDE_STYLE('',(#294451)); +#294451 = SURFACE_STYLE_FILL_AREA(#294452); +#294452 = FILL_AREA_STYLE('',(#294453)); +#294453 = FILL_AREA_STYLE_COLOUR('',#270350); +#294454 = CURVE_STYLE('',#294455,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294455 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294456 = STYLED_ITEM('color',(#294457),#39944); +#294457 = PRESENTATION_STYLE_ASSIGNMENT((#294458,#294463)); +#294458 = SURFACE_STYLE_USAGE(.BOTH.,#294459); +#294459 = SURFACE_SIDE_STYLE('',(#294460)); +#294460 = SURFACE_STYLE_FILL_AREA(#294461); +#294461 = FILL_AREA_STYLE('',(#294462)); +#294462 = FILL_AREA_STYLE_COLOUR('',#270441); +#294463 = CURVE_STYLE('',#294464,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294464 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294465 = STYLED_ITEM('color',(#294466),#40036); +#294466 = PRESENTATION_STYLE_ASSIGNMENT((#294467,#294472)); +#294467 = SURFACE_STYLE_USAGE(.BOTH.,#294468); +#294468 = SURFACE_SIDE_STYLE('',(#294469)); +#294469 = SURFACE_STYLE_FILL_AREA(#294470); +#294470 = FILL_AREA_STYLE('',(#294471)); +#294471 = FILL_AREA_STYLE_COLOUR('',#270441); +#294472 = CURVE_STYLE('',#294473,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294473 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294474 = STYLED_ITEM('color',(#294475),#40061); +#294475 = PRESENTATION_STYLE_ASSIGNMENT((#294476,#294481)); +#294476 = SURFACE_STYLE_USAGE(.BOTH.,#294477); +#294477 = SURFACE_SIDE_STYLE('',(#294478)); +#294478 = SURFACE_STYLE_FILL_AREA(#294479); +#294479 = FILL_AREA_STYLE('',(#294480)); +#294480 = FILL_AREA_STYLE_COLOUR('',#270441); +#294481 = CURVE_STYLE('',#294482,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294482 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294483 = STYLED_ITEM('color',(#294484),#40145); +#294484 = PRESENTATION_STYLE_ASSIGNMENT((#294485,#294490)); +#294485 = SURFACE_STYLE_USAGE(.BOTH.,#294486); +#294486 = SURFACE_SIDE_STYLE('',(#294487)); +#294487 = SURFACE_STYLE_FILL_AREA(#294488); +#294488 = FILL_AREA_STYLE('',(#294489)); +#294489 = FILL_AREA_STYLE_COLOUR('',#270350); +#294490 = CURVE_STYLE('',#294491,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294491 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294492 = STYLED_ITEM('color',(#294493),#40167); +#294493 = PRESENTATION_STYLE_ASSIGNMENT((#294494,#294499)); +#294494 = SURFACE_STYLE_USAGE(.BOTH.,#294495); +#294495 = SURFACE_SIDE_STYLE('',(#294496)); +#294496 = SURFACE_STYLE_FILL_AREA(#294497); +#294497 = FILL_AREA_STYLE('',(#294498)); +#294498 = FILL_AREA_STYLE_COLOUR('',#270441); +#294499 = CURVE_STYLE('',#294500,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294500 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294501 = STYLED_ITEM('color',(#294502),#40259); +#294502 = PRESENTATION_STYLE_ASSIGNMENT((#294503,#294508)); +#294503 = SURFACE_STYLE_USAGE(.BOTH.,#294504); +#294504 = SURFACE_SIDE_STYLE('',(#294505)); +#294505 = SURFACE_STYLE_FILL_AREA(#294506); +#294506 = FILL_AREA_STYLE('',(#294507)); +#294507 = FILL_AREA_STYLE_COLOUR('',#270441); +#294508 = CURVE_STYLE('',#294509,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294509 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294510 = STYLED_ITEM('color',(#294511),#40284); +#294511 = PRESENTATION_STYLE_ASSIGNMENT((#294512,#294517)); +#294512 = SURFACE_STYLE_USAGE(.BOTH.,#294513); +#294513 = SURFACE_SIDE_STYLE('',(#294514)); +#294514 = SURFACE_STYLE_FILL_AREA(#294515); +#294515 = FILL_AREA_STYLE('',(#294516)); +#294516 = FILL_AREA_STYLE_COLOUR('',#270441); +#294517 = CURVE_STYLE('',#294518,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294518 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294519 = STYLED_ITEM('color',(#294520),#40368); +#294520 = PRESENTATION_STYLE_ASSIGNMENT((#294521,#294526)); +#294521 = SURFACE_STYLE_USAGE(.BOTH.,#294522); +#294522 = SURFACE_SIDE_STYLE('',(#294523)); +#294523 = SURFACE_STYLE_FILL_AREA(#294524); +#294524 = FILL_AREA_STYLE('',(#294525)); +#294525 = FILL_AREA_STYLE_COLOUR('',#270350); +#294526 = CURVE_STYLE('',#294527,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294527 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294528 = STYLED_ITEM('color',(#294529),#40385); +#294529 = PRESENTATION_STYLE_ASSIGNMENT((#294530,#294535)); +#294530 = SURFACE_STYLE_USAGE(.BOTH.,#294531); +#294531 = SURFACE_SIDE_STYLE('',(#294532)); +#294532 = SURFACE_STYLE_FILL_AREA(#294533); +#294533 = FILL_AREA_STYLE('',(#294534)); +#294534 = FILL_AREA_STYLE_COLOUR('',#270441); +#294535 = CURVE_STYLE('',#294536,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294536 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294537 = STYLED_ITEM('color',(#294538),#40470); +#294538 = PRESENTATION_STYLE_ASSIGNMENT((#294539,#294544)); +#294539 = SURFACE_STYLE_USAGE(.BOTH.,#294540); +#294540 = SURFACE_SIDE_STYLE('',(#294541)); +#294541 = SURFACE_STYLE_FILL_AREA(#294542); +#294542 = FILL_AREA_STYLE('',(#294543)); +#294543 = FILL_AREA_STYLE_COLOUR('',#270441); +#294544 = CURVE_STYLE('',#294545,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294545 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294546 = STYLED_ITEM('color',(#294547),#40495); +#294547 = PRESENTATION_STYLE_ASSIGNMENT((#294548,#294553)); +#294548 = SURFACE_STYLE_USAGE(.BOTH.,#294549); +#294549 = SURFACE_SIDE_STYLE('',(#294550)); +#294550 = SURFACE_STYLE_FILL_AREA(#294551); +#294551 = FILL_AREA_STYLE('',(#294552)); +#294552 = FILL_AREA_STYLE_COLOUR('',#270441); +#294553 = CURVE_STYLE('',#294554,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294554 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294555 = STYLED_ITEM('color',(#294556),#40572); +#294556 = PRESENTATION_STYLE_ASSIGNMENT((#294557,#294562)); +#294557 = SURFACE_STYLE_USAGE(.BOTH.,#294558); +#294558 = SURFACE_SIDE_STYLE('',(#294559)); +#294559 = SURFACE_STYLE_FILL_AREA(#294560); +#294560 = FILL_AREA_STYLE('',(#294561)); +#294561 = FILL_AREA_STYLE_COLOUR('',#270441); +#294562 = CURVE_STYLE('',#294563,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294563 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294564 = STYLED_ITEM('color',(#294565),#40657); +#294565 = PRESENTATION_STYLE_ASSIGNMENT((#294566,#294571)); +#294566 = SURFACE_STYLE_USAGE(.BOTH.,#294567); +#294567 = SURFACE_SIDE_STYLE('',(#294568)); +#294568 = SURFACE_STYLE_FILL_AREA(#294569); +#294569 = FILL_AREA_STYLE('',(#294570)); +#294570 = FILL_AREA_STYLE_COLOUR('',#270441); +#294571 = CURVE_STYLE('',#294572,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294572 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294573 = STYLED_ITEM('color',(#294574),#40682); +#294574 = PRESENTATION_STYLE_ASSIGNMENT((#294575,#294580)); +#294575 = SURFACE_STYLE_USAGE(.BOTH.,#294576); +#294576 = SURFACE_SIDE_STYLE('',(#294577)); +#294577 = SURFACE_STYLE_FILL_AREA(#294578); +#294578 = FILL_AREA_STYLE('',(#294579)); +#294579 = FILL_AREA_STYLE_COLOUR('',#270441); +#294580 = CURVE_STYLE('',#294581,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294581 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294582 = STYLED_ITEM('color',(#294583),#40759); +#294583 = PRESENTATION_STYLE_ASSIGNMENT((#294584,#294589)); +#294584 = SURFACE_STYLE_USAGE(.BOTH.,#294585); +#294585 = SURFACE_SIDE_STYLE('',(#294586)); +#294586 = SURFACE_STYLE_FILL_AREA(#294587); +#294587 = FILL_AREA_STYLE('',(#294588)); +#294588 = FILL_AREA_STYLE_COLOUR('',#270350); +#294589 = CURVE_STYLE('',#294590,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294590 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294591 = STYLED_ITEM('color',(#294592),#40776); +#294592 = PRESENTATION_STYLE_ASSIGNMENT((#294593,#294598)); +#294593 = SURFACE_STYLE_USAGE(.BOTH.,#294594); +#294594 = SURFACE_SIDE_STYLE('',(#294595)); +#294595 = SURFACE_STYLE_FILL_AREA(#294596); +#294596 = FILL_AREA_STYLE('',(#294597)); +#294597 = FILL_AREA_STYLE_COLOUR('',#270441); +#294598 = CURVE_STYLE('',#294599,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294599 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294600 = STYLED_ITEM('color',(#294601),#40868); +#294601 = PRESENTATION_STYLE_ASSIGNMENT((#294602,#294607)); +#294602 = SURFACE_STYLE_USAGE(.BOTH.,#294603); +#294603 = SURFACE_SIDE_STYLE('',(#294604)); +#294604 = SURFACE_STYLE_FILL_AREA(#294605); +#294605 = FILL_AREA_STYLE('',(#294606)); +#294606 = FILL_AREA_STYLE_COLOUR('',#270441); +#294607 = CURVE_STYLE('',#294608,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294608 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294609 = STYLED_ITEM('color',(#294610),#40893); +#294610 = PRESENTATION_STYLE_ASSIGNMENT((#294611,#294616)); +#294611 = SURFACE_STYLE_USAGE(.BOTH.,#294612); +#294612 = SURFACE_SIDE_STYLE('',(#294613)); +#294613 = SURFACE_STYLE_FILL_AREA(#294614); +#294614 = FILL_AREA_STYLE('',(#294615)); +#294615 = FILL_AREA_STYLE_COLOUR('',#270441); +#294616 = CURVE_STYLE('',#294617,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294617 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294618 = STYLED_ITEM('color',(#294619),#40977); +#294619 = PRESENTATION_STYLE_ASSIGNMENT((#294620,#294625)); +#294620 = SURFACE_STYLE_USAGE(.BOTH.,#294621); +#294621 = SURFACE_SIDE_STYLE('',(#294622)); +#294622 = SURFACE_STYLE_FILL_AREA(#294623); +#294623 = FILL_AREA_STYLE('',(#294624)); +#294624 = FILL_AREA_STYLE_COLOUR('',#270350); +#294625 = CURVE_STYLE('',#294626,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294626 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294627 = STYLED_ITEM('color',(#294628),#40999); +#294628 = PRESENTATION_STYLE_ASSIGNMENT((#294629,#294634)); +#294629 = SURFACE_STYLE_USAGE(.BOTH.,#294630); +#294630 = SURFACE_SIDE_STYLE('',(#294631)); +#294631 = SURFACE_STYLE_FILL_AREA(#294632); +#294632 = FILL_AREA_STYLE('',(#294633)); +#294633 = FILL_AREA_STYLE_COLOUR('',#270441); +#294634 = CURVE_STYLE('',#294635,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294635 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294636 = STYLED_ITEM('color',(#294637),#41091); +#294637 = PRESENTATION_STYLE_ASSIGNMENT((#294638,#294643)); +#294638 = SURFACE_STYLE_USAGE(.BOTH.,#294639); +#294639 = SURFACE_SIDE_STYLE('',(#294640)); +#294640 = SURFACE_STYLE_FILL_AREA(#294641); +#294641 = FILL_AREA_STYLE('',(#294642)); +#294642 = FILL_AREA_STYLE_COLOUR('',#270441); +#294643 = CURVE_STYLE('',#294644,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294644 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294645 = STYLED_ITEM('color',(#294646),#41116); +#294646 = PRESENTATION_STYLE_ASSIGNMENT((#294647,#294652)); +#294647 = SURFACE_STYLE_USAGE(.BOTH.,#294648); +#294648 = SURFACE_SIDE_STYLE('',(#294649)); +#294649 = SURFACE_STYLE_FILL_AREA(#294650); +#294650 = FILL_AREA_STYLE('',(#294651)); +#294651 = FILL_AREA_STYLE_COLOUR('',#270441); +#294652 = CURVE_STYLE('',#294653,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294653 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294654 = STYLED_ITEM('color',(#294655),#41200); +#294655 = PRESENTATION_STYLE_ASSIGNMENT((#294656,#294661)); +#294656 = SURFACE_STYLE_USAGE(.BOTH.,#294657); +#294657 = SURFACE_SIDE_STYLE('',(#294658)); +#294658 = SURFACE_STYLE_FILL_AREA(#294659); +#294659 = FILL_AREA_STYLE('',(#294660)); +#294660 = FILL_AREA_STYLE_COLOUR('',#270350); +#294661 = CURVE_STYLE('',#294662,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294662 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294663 = STYLED_ITEM('color',(#294664),#41222); +#294664 = PRESENTATION_STYLE_ASSIGNMENT((#294665,#294670)); +#294665 = SURFACE_STYLE_USAGE(.BOTH.,#294666); +#294666 = SURFACE_SIDE_STYLE('',(#294667)); +#294667 = SURFACE_STYLE_FILL_AREA(#294668); +#294668 = FILL_AREA_STYLE('',(#294669)); +#294669 = FILL_AREA_STYLE_COLOUR('',#270441); +#294670 = CURVE_STYLE('',#294671,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294671 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294672 = STYLED_ITEM('color',(#294673),#41314); +#294673 = PRESENTATION_STYLE_ASSIGNMENT((#294674,#294679)); +#294674 = SURFACE_STYLE_USAGE(.BOTH.,#294675); +#294675 = SURFACE_SIDE_STYLE('',(#294676)); +#294676 = SURFACE_STYLE_FILL_AREA(#294677); +#294677 = FILL_AREA_STYLE('',(#294678)); +#294678 = FILL_AREA_STYLE_COLOUR('',#270441); +#294679 = CURVE_STYLE('',#294680,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294680 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294681 = STYLED_ITEM('color',(#294682),#41339); +#294682 = PRESENTATION_STYLE_ASSIGNMENT((#294683,#294688)); +#294683 = SURFACE_STYLE_USAGE(.BOTH.,#294684); +#294684 = SURFACE_SIDE_STYLE('',(#294685)); +#294685 = SURFACE_STYLE_FILL_AREA(#294686); +#294686 = FILL_AREA_STYLE('',(#294687)); +#294687 = FILL_AREA_STYLE_COLOUR('',#270441); +#294688 = CURVE_STYLE('',#294689,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294689 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294690 = STYLED_ITEM('color',(#294691),#41423); +#294691 = PRESENTATION_STYLE_ASSIGNMENT((#294692,#294697)); +#294692 = SURFACE_STYLE_USAGE(.BOTH.,#294693); +#294693 = SURFACE_SIDE_STYLE('',(#294694)); +#294694 = SURFACE_STYLE_FILL_AREA(#294695); +#294695 = FILL_AREA_STYLE('',(#294696)); +#294696 = FILL_AREA_STYLE_COLOUR('',#270441); +#294697 = CURVE_STYLE('',#294698,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294698 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294699 = STYLED_ITEM('color',(#294700),#41440); +#294700 = PRESENTATION_STYLE_ASSIGNMENT((#294701,#294706)); +#294701 = SURFACE_STYLE_USAGE(.BOTH.,#294702); +#294702 = SURFACE_SIDE_STYLE('',(#294703)); +#294703 = SURFACE_STYLE_FILL_AREA(#294704); +#294704 = FILL_AREA_STYLE('',(#294705)); +#294705 = FILL_AREA_STYLE_COLOUR('',#270441); +#294706 = CURVE_STYLE('',#294707,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294707 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294708 = STYLED_ITEM('color',(#294709),#41459); +#294709 = PRESENTATION_STYLE_ASSIGNMENT((#294710,#294715)); +#294710 = SURFACE_STYLE_USAGE(.BOTH.,#294711); +#294711 = SURFACE_SIDE_STYLE('',(#294712)); +#294712 = SURFACE_STYLE_FILL_AREA(#294713); +#294713 = FILL_AREA_STYLE('',(#294714)); +#294714 = FILL_AREA_STYLE_COLOUR('',#270441); +#294715 = CURVE_STYLE('',#294716,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294716 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294717 = STYLED_ITEM('color',(#294718),#41478); +#294718 = PRESENTATION_STYLE_ASSIGNMENT((#294719,#294724)); +#294719 = SURFACE_STYLE_USAGE(.BOTH.,#294720); +#294720 = SURFACE_SIDE_STYLE('',(#294721)); +#294721 = SURFACE_STYLE_FILL_AREA(#294722); +#294722 = FILL_AREA_STYLE('',(#294723)); +#294723 = FILL_AREA_STYLE_COLOUR('',#270441); +#294724 = CURVE_STYLE('',#294725,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294725 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294726 = STYLED_ITEM('color',(#294727),#41497); +#294727 = PRESENTATION_STYLE_ASSIGNMENT((#294728,#294733)); +#294728 = SURFACE_STYLE_USAGE(.BOTH.,#294729); +#294729 = SURFACE_SIDE_STYLE('',(#294730)); +#294730 = SURFACE_STYLE_FILL_AREA(#294731); +#294731 = FILL_AREA_STYLE('',(#294732)); +#294732 = FILL_AREA_STYLE_COLOUR('',#270350); +#294733 = CURVE_STYLE('',#294734,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294734 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294735 = STYLED_ITEM('color',(#294736),#41543); +#294736 = PRESENTATION_STYLE_ASSIGNMENT((#294737,#294742)); +#294737 = SURFACE_STYLE_USAGE(.BOTH.,#294738); +#294738 = SURFACE_SIDE_STYLE('',(#294739)); +#294739 = SURFACE_STYLE_FILL_AREA(#294740); +#294740 = FILL_AREA_STYLE('',(#294741)); +#294741 = FILL_AREA_STYLE_COLOUR('',#270350); +#294742 = CURVE_STYLE('',#294743,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294743 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294744 = STYLED_ITEM('color',(#294745),#41559); +#294745 = PRESENTATION_STYLE_ASSIGNMENT((#294746,#294751)); +#294746 = SURFACE_STYLE_USAGE(.BOTH.,#294747); +#294747 = SURFACE_SIDE_STYLE('',(#294748)); +#294748 = SURFACE_STYLE_FILL_AREA(#294749); +#294749 = FILL_AREA_STYLE('',(#294750)); +#294750 = FILL_AREA_STYLE_COLOUR('',#270441); +#294751 = CURVE_STYLE('',#294752,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294752 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294753 = STYLED_ITEM('color',(#294754),#41578); +#294754 = PRESENTATION_STYLE_ASSIGNMENT((#294755,#294760)); +#294755 = SURFACE_STYLE_USAGE(.BOTH.,#294756); +#294756 = SURFACE_SIDE_STYLE('',(#294757)); +#294757 = SURFACE_STYLE_FILL_AREA(#294758); +#294758 = FILL_AREA_STYLE('',(#294759)); +#294759 = FILL_AREA_STYLE_COLOUR('',#270441); +#294760 = CURVE_STYLE('',#294761,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294761 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294762 = STYLED_ITEM('color',(#294763),#41597); +#294763 = PRESENTATION_STYLE_ASSIGNMENT((#294764,#294769)); +#294764 = SURFACE_STYLE_USAGE(.BOTH.,#294765); +#294765 = SURFACE_SIDE_STYLE('',(#294766)); +#294766 = SURFACE_STYLE_FILL_AREA(#294767); +#294767 = FILL_AREA_STYLE('',(#294768)); +#294768 = FILL_AREA_STYLE_COLOUR('',#270441); +#294769 = CURVE_STYLE('',#294770,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294770 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294771 = STYLED_ITEM('color',(#294772),#41616); +#294772 = PRESENTATION_STYLE_ASSIGNMENT((#294773,#294778)); +#294773 = SURFACE_STYLE_USAGE(.BOTH.,#294774); +#294774 = SURFACE_SIDE_STYLE('',(#294775)); +#294775 = SURFACE_STYLE_FILL_AREA(#294776); +#294776 = FILL_AREA_STYLE('',(#294777)); +#294777 = FILL_AREA_STYLE_COLOUR('',#270350); +#294778 = CURVE_STYLE('',#294779,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294779 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294780 = STYLED_ITEM('color',(#294781),#41632); +#294781 = PRESENTATION_STYLE_ASSIGNMENT((#294782,#294787)); +#294782 = SURFACE_STYLE_USAGE(.BOTH.,#294783); +#294783 = SURFACE_SIDE_STYLE('',(#294784)); +#294784 = SURFACE_STYLE_FILL_AREA(#294785); +#294785 = FILL_AREA_STYLE('',(#294786)); +#294786 = FILL_AREA_STYLE_COLOUR('',#270441); +#294787 = CURVE_STYLE('',#294788,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294788 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294789 = STYLED_ITEM('color',(#294790),#41649); +#294790 = PRESENTATION_STYLE_ASSIGNMENT((#294791,#294796)); +#294791 = SURFACE_STYLE_USAGE(.BOTH.,#294792); +#294792 = SURFACE_SIDE_STYLE('',(#294793)); +#294793 = SURFACE_STYLE_FILL_AREA(#294794); +#294794 = FILL_AREA_STYLE('',(#294795)); +#294795 = FILL_AREA_STYLE_COLOUR('',#270350); +#294796 = CURVE_STYLE('',#294797,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#294797 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294798 = STYLED_ITEM('color',(#294799),#41661); +#294799 = PRESENTATION_STYLE_ASSIGNMENT((#294800,#294805)); +#294800 = SURFACE_STYLE_USAGE(.BOTH.,#294801); +#294801 = SURFACE_SIDE_STYLE('',(#294802)); +#294802 = SURFACE_STYLE_FILL_AREA(#294803); +#294803 = FILL_AREA_STYLE('',(#294804)); +#294804 = FILL_AREA_STYLE_COLOUR('',#270441); +#294805 = CURVE_STYLE('',#294806,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294806 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294807 = STYLED_ITEM('color',(#294808),#41678); +#294808 = PRESENTATION_STYLE_ASSIGNMENT((#294809,#294814)); +#294809 = SURFACE_STYLE_USAGE(.BOTH.,#294810); +#294810 = SURFACE_SIDE_STYLE('',(#294811)); +#294811 = SURFACE_STYLE_FILL_AREA(#294812); +#294812 = FILL_AREA_STYLE('',(#294813)); +#294813 = FILL_AREA_STYLE_COLOUR('',#270441); +#294814 = CURVE_STYLE('',#294815,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294815 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294816 = STYLED_ITEM('color',(#294817),#41695); +#294817 = PRESENTATION_STYLE_ASSIGNMENT((#294818,#294823)); +#294818 = SURFACE_STYLE_USAGE(.BOTH.,#294819); +#294819 = SURFACE_SIDE_STYLE('',(#294820)); +#294820 = SURFACE_STYLE_FILL_AREA(#294821); +#294821 = FILL_AREA_STYLE('',(#294822)); +#294822 = FILL_AREA_STYLE_COLOUR('',#270441); +#294823 = CURVE_STYLE('',#294824,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294824 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294825 = STYLED_ITEM('color',(#294826),#41712); +#294826 = PRESENTATION_STYLE_ASSIGNMENT((#294827,#294832)); +#294827 = SURFACE_STYLE_USAGE(.BOTH.,#294828); +#294828 = SURFACE_SIDE_STYLE('',(#294829)); +#294829 = SURFACE_STYLE_FILL_AREA(#294830); +#294830 = FILL_AREA_STYLE('',(#294831)); +#294831 = FILL_AREA_STYLE_COLOUR('',#270441); +#294832 = CURVE_STYLE('',#294833,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294833 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294834 = STYLED_ITEM('color',(#294835),#41729); +#294835 = PRESENTATION_STYLE_ASSIGNMENT((#294836,#294841)); +#294836 = SURFACE_STYLE_USAGE(.BOTH.,#294837); +#294837 = SURFACE_SIDE_STYLE('',(#294838)); +#294838 = SURFACE_STYLE_FILL_AREA(#294839); +#294839 = FILL_AREA_STYLE('',(#294840)); +#294840 = FILL_AREA_STYLE_COLOUR('',#270441); +#294841 = CURVE_STYLE('',#294842,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294842 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294843 = STYLED_ITEM('color',(#294844),#41746); +#294844 = PRESENTATION_STYLE_ASSIGNMENT((#294845,#294850)); +#294845 = SURFACE_STYLE_USAGE(.BOTH.,#294846); +#294846 = SURFACE_SIDE_STYLE('',(#294847)); +#294847 = SURFACE_STYLE_FILL_AREA(#294848); +#294848 = FILL_AREA_STYLE('',(#294849)); +#294849 = FILL_AREA_STYLE_COLOUR('',#270441); +#294850 = CURVE_STYLE('',#294851,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294851 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294852 = STYLED_ITEM('color',(#294853),#41763); +#294853 = PRESENTATION_STYLE_ASSIGNMENT((#294854,#294859)); +#294854 = SURFACE_STYLE_USAGE(.BOTH.,#294855); +#294855 = SURFACE_SIDE_STYLE('',(#294856)); +#294856 = SURFACE_STYLE_FILL_AREA(#294857); +#294857 = FILL_AREA_STYLE('',(#294858)); +#294858 = FILL_AREA_STYLE_COLOUR('',#270441); +#294859 = CURVE_STYLE('',#294860,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294860 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294861 = STYLED_ITEM('color',(#294862),#41780); +#294862 = PRESENTATION_STYLE_ASSIGNMENT((#294863,#294868)); +#294863 = SURFACE_STYLE_USAGE(.BOTH.,#294864); +#294864 = SURFACE_SIDE_STYLE('',(#294865)); +#294865 = SURFACE_STYLE_FILL_AREA(#294866); +#294866 = FILL_AREA_STYLE('',(#294867)); +#294867 = FILL_AREA_STYLE_COLOUR('',#270441); +#294868 = CURVE_STYLE('',#294869,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294869 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294870 = STYLED_ITEM('color',(#294871),#41792); +#294871 = PRESENTATION_STYLE_ASSIGNMENT((#294872,#294877)); +#294872 = SURFACE_STYLE_USAGE(.BOTH.,#294873); +#294873 = SURFACE_SIDE_STYLE('',(#294874)); +#294874 = SURFACE_STYLE_FILL_AREA(#294875); +#294875 = FILL_AREA_STYLE('',(#294876)); +#294876 = FILL_AREA_STYLE_COLOUR('',#270441); +#294877 = CURVE_STYLE('',#294878,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294878 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294879 = STYLED_ITEM('color',(#294880),#41809); +#294880 = PRESENTATION_STYLE_ASSIGNMENT((#294881,#294886)); +#294881 = SURFACE_STYLE_USAGE(.BOTH.,#294882); +#294882 = SURFACE_SIDE_STYLE('',(#294883)); +#294883 = SURFACE_STYLE_FILL_AREA(#294884); +#294884 = FILL_AREA_STYLE('',(#294885)); +#294885 = FILL_AREA_STYLE_COLOUR('',#270441); +#294886 = CURVE_STYLE('',#294887,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294887 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294888 = STYLED_ITEM('color',(#294889),#41826); +#294889 = PRESENTATION_STYLE_ASSIGNMENT((#294890,#294895)); +#294890 = SURFACE_STYLE_USAGE(.BOTH.,#294891); +#294891 = SURFACE_SIDE_STYLE('',(#294892)); +#294892 = SURFACE_STYLE_FILL_AREA(#294893); +#294893 = FILL_AREA_STYLE('',(#294894)); +#294894 = FILL_AREA_STYLE_COLOUR('',#270441); +#294895 = CURVE_STYLE('',#294896,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294896 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294897 = STYLED_ITEM('color',(#294898),#41843); +#294898 = PRESENTATION_STYLE_ASSIGNMENT((#294899,#294904)); +#294899 = SURFACE_STYLE_USAGE(.BOTH.,#294900); +#294900 = SURFACE_SIDE_STYLE('',(#294901)); +#294901 = SURFACE_STYLE_FILL_AREA(#294902); +#294902 = FILL_AREA_STYLE('',(#294903)); +#294903 = FILL_AREA_STYLE_COLOUR('',#270441); +#294904 = CURVE_STYLE('',#294905,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294905 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294906 = STYLED_ITEM('color',(#294907),#41860); +#294907 = PRESENTATION_STYLE_ASSIGNMENT((#294908,#294913)); +#294908 = SURFACE_STYLE_USAGE(.BOTH.,#294909); +#294909 = SURFACE_SIDE_STYLE('',(#294910)); +#294910 = SURFACE_STYLE_FILL_AREA(#294911); +#294911 = FILL_AREA_STYLE('',(#294912)); +#294912 = FILL_AREA_STYLE_COLOUR('',#270441); +#294913 = CURVE_STYLE('',#294914,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294914 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294915 = STYLED_ITEM('color',(#294916),#41877); +#294916 = PRESENTATION_STYLE_ASSIGNMENT((#294917,#294922)); +#294917 = SURFACE_STYLE_USAGE(.BOTH.,#294918); +#294918 = SURFACE_SIDE_STYLE('',(#294919)); +#294919 = SURFACE_STYLE_FILL_AREA(#294920); +#294920 = FILL_AREA_STYLE('',(#294921)); +#294921 = FILL_AREA_STYLE_COLOUR('',#270441); +#294922 = CURVE_STYLE('',#294923,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294923 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294924 = STYLED_ITEM('color',(#294925),#41894); +#294925 = PRESENTATION_STYLE_ASSIGNMENT((#294926,#294931)); +#294926 = SURFACE_STYLE_USAGE(.BOTH.,#294927); +#294927 = SURFACE_SIDE_STYLE('',(#294928)); +#294928 = SURFACE_STYLE_FILL_AREA(#294929); +#294929 = FILL_AREA_STYLE('',(#294930)); +#294930 = FILL_AREA_STYLE_COLOUR('',#270441); +#294931 = CURVE_STYLE('',#294932,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294932 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294933 = STYLED_ITEM('color',(#294934),#41911); +#294934 = PRESENTATION_STYLE_ASSIGNMENT((#294935,#294940)); +#294935 = SURFACE_STYLE_USAGE(.BOTH.,#294936); +#294936 = SURFACE_SIDE_STYLE('',(#294937)); +#294937 = SURFACE_STYLE_FILL_AREA(#294938); +#294938 = FILL_AREA_STYLE('',(#294939)); +#294939 = FILL_AREA_STYLE_COLOUR('',#270441); +#294940 = CURVE_STYLE('',#294941,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294941 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294942 = STYLED_ITEM('color',(#294943),#41923); +#294943 = PRESENTATION_STYLE_ASSIGNMENT((#294944,#294949)); +#294944 = SURFACE_STYLE_USAGE(.BOTH.,#294945); +#294945 = SURFACE_SIDE_STYLE('',(#294946)); +#294946 = SURFACE_STYLE_FILL_AREA(#294947); +#294947 = FILL_AREA_STYLE('',(#294948)); +#294948 = FILL_AREA_STYLE_COLOUR('',#270441); +#294949 = CURVE_STYLE('',#294950,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294950 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294951 = STYLED_ITEM('color',(#294952),#41940); +#294952 = PRESENTATION_STYLE_ASSIGNMENT((#294953,#294958)); +#294953 = SURFACE_STYLE_USAGE(.BOTH.,#294954); +#294954 = SURFACE_SIDE_STYLE('',(#294955)); +#294955 = SURFACE_STYLE_FILL_AREA(#294956); +#294956 = FILL_AREA_STYLE('',(#294957)); +#294957 = FILL_AREA_STYLE_COLOUR('',#270441); +#294958 = CURVE_STYLE('',#294959,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294959 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294960 = STYLED_ITEM('color',(#294961),#41957); +#294961 = PRESENTATION_STYLE_ASSIGNMENT((#294962,#294967)); +#294962 = SURFACE_STYLE_USAGE(.BOTH.,#294963); +#294963 = SURFACE_SIDE_STYLE('',(#294964)); +#294964 = SURFACE_STYLE_FILL_AREA(#294965); +#294965 = FILL_AREA_STYLE('',(#294966)); +#294966 = FILL_AREA_STYLE_COLOUR('',#270441); +#294967 = CURVE_STYLE('',#294968,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294968 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294969 = STYLED_ITEM('color',(#294970),#41974); +#294970 = PRESENTATION_STYLE_ASSIGNMENT((#294971,#294976)); +#294971 = SURFACE_STYLE_USAGE(.BOTH.,#294972); +#294972 = SURFACE_SIDE_STYLE('',(#294973)); +#294973 = SURFACE_STYLE_FILL_AREA(#294974); +#294974 = FILL_AREA_STYLE('',(#294975)); +#294975 = FILL_AREA_STYLE_COLOUR('',#270441); +#294976 = CURVE_STYLE('',#294977,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294977 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294978 = STYLED_ITEM('color',(#294979),#41991); +#294979 = PRESENTATION_STYLE_ASSIGNMENT((#294980,#294985)); +#294980 = SURFACE_STYLE_USAGE(.BOTH.,#294981); +#294981 = SURFACE_SIDE_STYLE('',(#294982)); +#294982 = SURFACE_STYLE_FILL_AREA(#294983); +#294983 = FILL_AREA_STYLE('',(#294984)); +#294984 = FILL_AREA_STYLE_COLOUR('',#270441); +#294985 = CURVE_STYLE('',#294986,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294986 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294987 = STYLED_ITEM('color',(#294988),#42008); +#294988 = PRESENTATION_STYLE_ASSIGNMENT((#294989,#294994)); +#294989 = SURFACE_STYLE_USAGE(.BOTH.,#294990); +#294990 = SURFACE_SIDE_STYLE('',(#294991)); +#294991 = SURFACE_STYLE_FILL_AREA(#294992); +#294992 = FILL_AREA_STYLE('',(#294993)); +#294993 = FILL_AREA_STYLE_COLOUR('',#270441); +#294994 = CURVE_STYLE('',#294995,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#294995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#294996 = STYLED_ITEM('color',(#294997),#42025); +#294997 = PRESENTATION_STYLE_ASSIGNMENT((#294998,#295003)); +#294998 = SURFACE_STYLE_USAGE(.BOTH.,#294999); +#294999 = SURFACE_SIDE_STYLE('',(#295000)); +#295000 = SURFACE_STYLE_FILL_AREA(#295001); +#295001 = FILL_AREA_STYLE('',(#295002)); +#295002 = FILL_AREA_STYLE_COLOUR('',#270441); +#295003 = CURVE_STYLE('',#295004,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295004 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295005 = STYLED_ITEM('color',(#295006),#42042); +#295006 = PRESENTATION_STYLE_ASSIGNMENT((#295007,#295012)); +#295007 = SURFACE_STYLE_USAGE(.BOTH.,#295008); +#295008 = SURFACE_SIDE_STYLE('',(#295009)); +#295009 = SURFACE_STYLE_FILL_AREA(#295010); +#295010 = FILL_AREA_STYLE('',(#295011)); +#295011 = FILL_AREA_STYLE_COLOUR('',#270441); +#295012 = CURVE_STYLE('',#295013,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295013 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295014 = STYLED_ITEM('color',(#295015),#42054); +#295015 = PRESENTATION_STYLE_ASSIGNMENT((#295016,#295021)); +#295016 = SURFACE_STYLE_USAGE(.BOTH.,#295017); +#295017 = SURFACE_SIDE_STYLE('',(#295018)); +#295018 = SURFACE_STYLE_FILL_AREA(#295019); +#295019 = FILL_AREA_STYLE('',(#295020)); +#295020 = FILL_AREA_STYLE_COLOUR('',#270441); +#295021 = CURVE_STYLE('',#295022,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295023 = STYLED_ITEM('color',(#295024),#42071); +#295024 = PRESENTATION_STYLE_ASSIGNMENT((#295025,#295030)); +#295025 = SURFACE_STYLE_USAGE(.BOTH.,#295026); +#295026 = SURFACE_SIDE_STYLE('',(#295027)); +#295027 = SURFACE_STYLE_FILL_AREA(#295028); +#295028 = FILL_AREA_STYLE('',(#295029)); +#295029 = FILL_AREA_STYLE_COLOUR('',#270441); +#295030 = CURVE_STYLE('',#295031,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295031 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295032 = STYLED_ITEM('color',(#295033),#42088); +#295033 = PRESENTATION_STYLE_ASSIGNMENT((#295034,#295039)); +#295034 = SURFACE_STYLE_USAGE(.BOTH.,#295035); +#295035 = SURFACE_SIDE_STYLE('',(#295036)); +#295036 = SURFACE_STYLE_FILL_AREA(#295037); +#295037 = FILL_AREA_STYLE('',(#295038)); +#295038 = FILL_AREA_STYLE_COLOUR('',#270441); +#295039 = CURVE_STYLE('',#295040,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295040 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295041 = STYLED_ITEM('color',(#295042),#42105); +#295042 = PRESENTATION_STYLE_ASSIGNMENT((#295043,#295048)); +#295043 = SURFACE_STYLE_USAGE(.BOTH.,#295044); +#295044 = SURFACE_SIDE_STYLE('',(#295045)); +#295045 = SURFACE_STYLE_FILL_AREA(#295046); +#295046 = FILL_AREA_STYLE('',(#295047)); +#295047 = FILL_AREA_STYLE_COLOUR('',#270441); +#295048 = CURVE_STYLE('',#295049,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295049 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295050 = STYLED_ITEM('color',(#295051),#42122); +#295051 = PRESENTATION_STYLE_ASSIGNMENT((#295052,#295057)); +#295052 = SURFACE_STYLE_USAGE(.BOTH.,#295053); +#295053 = SURFACE_SIDE_STYLE('',(#295054)); +#295054 = SURFACE_STYLE_FILL_AREA(#295055); +#295055 = FILL_AREA_STYLE('',(#295056)); +#295056 = FILL_AREA_STYLE_COLOUR('',#270441); +#295057 = CURVE_STYLE('',#295058,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295058 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295059 = STYLED_ITEM('color',(#295060),#42139); +#295060 = PRESENTATION_STYLE_ASSIGNMENT((#295061,#295066)); +#295061 = SURFACE_STYLE_USAGE(.BOTH.,#295062); +#295062 = SURFACE_SIDE_STYLE('',(#295063)); +#295063 = SURFACE_STYLE_FILL_AREA(#295064); +#295064 = FILL_AREA_STYLE('',(#295065)); +#295065 = FILL_AREA_STYLE_COLOUR('',#270441); +#295066 = CURVE_STYLE('',#295067,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295067 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295068 = STYLED_ITEM('color',(#295069),#42156); +#295069 = PRESENTATION_STYLE_ASSIGNMENT((#295070,#295075)); +#295070 = SURFACE_STYLE_USAGE(.BOTH.,#295071); +#295071 = SURFACE_SIDE_STYLE('',(#295072)); +#295072 = SURFACE_STYLE_FILL_AREA(#295073); +#295073 = FILL_AREA_STYLE('',(#295074)); +#295074 = FILL_AREA_STYLE_COLOUR('',#270441); +#295075 = CURVE_STYLE('',#295076,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295076 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295077 = STYLED_ITEM('color',(#295078),#42168); +#295078 = PRESENTATION_STYLE_ASSIGNMENT((#295079,#295084)); +#295079 = SURFACE_STYLE_USAGE(.BOTH.,#295080); +#295080 = SURFACE_SIDE_STYLE('',(#295081)); +#295081 = SURFACE_STYLE_FILL_AREA(#295082); +#295082 = FILL_AREA_STYLE('',(#295083)); +#295083 = FILL_AREA_STYLE_COLOUR('',#270441); +#295084 = CURVE_STYLE('',#295085,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295085 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295086 = STYLED_ITEM('color',(#295087),#42185); +#295087 = PRESENTATION_STYLE_ASSIGNMENT((#295088,#295093)); +#295088 = SURFACE_STYLE_USAGE(.BOTH.,#295089); +#295089 = SURFACE_SIDE_STYLE('',(#295090)); +#295090 = SURFACE_STYLE_FILL_AREA(#295091); +#295091 = FILL_AREA_STYLE('',(#295092)); +#295092 = FILL_AREA_STYLE_COLOUR('',#270441); +#295093 = CURVE_STYLE('',#295094,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295094 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295095 = STYLED_ITEM('color',(#295096),#42202); +#295096 = PRESENTATION_STYLE_ASSIGNMENT((#295097,#295102)); +#295097 = SURFACE_STYLE_USAGE(.BOTH.,#295098); +#295098 = SURFACE_SIDE_STYLE('',(#295099)); +#295099 = SURFACE_STYLE_FILL_AREA(#295100); +#295100 = FILL_AREA_STYLE('',(#295101)); +#295101 = FILL_AREA_STYLE_COLOUR('',#270441); +#295102 = CURVE_STYLE('',#295103,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295103 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295104 = STYLED_ITEM('color',(#295105),#42219); +#295105 = PRESENTATION_STYLE_ASSIGNMENT((#295106,#295111)); +#295106 = SURFACE_STYLE_USAGE(.BOTH.,#295107); +#295107 = SURFACE_SIDE_STYLE('',(#295108)); +#295108 = SURFACE_STYLE_FILL_AREA(#295109); +#295109 = FILL_AREA_STYLE('',(#295110)); +#295110 = FILL_AREA_STYLE_COLOUR('',#270441); +#295111 = CURVE_STYLE('',#295112,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295112 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295113 = STYLED_ITEM('color',(#295114),#42236); +#295114 = PRESENTATION_STYLE_ASSIGNMENT((#295115,#295120)); +#295115 = SURFACE_STYLE_USAGE(.BOTH.,#295116); +#295116 = SURFACE_SIDE_STYLE('',(#295117)); +#295117 = SURFACE_STYLE_FILL_AREA(#295118); +#295118 = FILL_AREA_STYLE('',(#295119)); +#295119 = FILL_AREA_STYLE_COLOUR('',#270441); +#295120 = CURVE_STYLE('',#295121,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295121 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295122 = STYLED_ITEM('color',(#295123),#42253); +#295123 = PRESENTATION_STYLE_ASSIGNMENT((#295124,#295129)); +#295124 = SURFACE_STYLE_USAGE(.BOTH.,#295125); +#295125 = SURFACE_SIDE_STYLE('',(#295126)); +#295126 = SURFACE_STYLE_FILL_AREA(#295127); +#295127 = FILL_AREA_STYLE('',(#295128)); +#295128 = FILL_AREA_STYLE_COLOUR('',#270441); +#295129 = CURVE_STYLE('',#295130,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295130 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295131 = STYLED_ITEM('color',(#295132),#42270); +#295132 = PRESENTATION_STYLE_ASSIGNMENT((#295133,#295138)); +#295133 = SURFACE_STYLE_USAGE(.BOTH.,#295134); +#295134 = SURFACE_SIDE_STYLE('',(#295135)); +#295135 = SURFACE_STYLE_FILL_AREA(#295136); +#295136 = FILL_AREA_STYLE('',(#295137)); +#295137 = FILL_AREA_STYLE_COLOUR('',#270441); +#295138 = CURVE_STYLE('',#295139,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295139 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295140 = STYLED_ITEM('color',(#295141),#42282); +#295141 = PRESENTATION_STYLE_ASSIGNMENT((#295142,#295147)); +#295142 = SURFACE_STYLE_USAGE(.BOTH.,#295143); +#295143 = SURFACE_SIDE_STYLE('',(#295144)); +#295144 = SURFACE_STYLE_FILL_AREA(#295145); +#295145 = FILL_AREA_STYLE('',(#295146)); +#295146 = FILL_AREA_STYLE_COLOUR('',#270441); +#295147 = CURVE_STYLE('',#295148,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295148 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295149 = STYLED_ITEM('color',(#295150),#42299); +#295150 = PRESENTATION_STYLE_ASSIGNMENT((#295151,#295156)); +#295151 = SURFACE_STYLE_USAGE(.BOTH.,#295152); +#295152 = SURFACE_SIDE_STYLE('',(#295153)); +#295153 = SURFACE_STYLE_FILL_AREA(#295154); +#295154 = FILL_AREA_STYLE('',(#295155)); +#295155 = FILL_AREA_STYLE_COLOUR('',#270441); +#295156 = CURVE_STYLE('',#295157,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295157 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295158 = STYLED_ITEM('color',(#295159),#42316); +#295159 = PRESENTATION_STYLE_ASSIGNMENT((#295160,#295165)); +#295160 = SURFACE_STYLE_USAGE(.BOTH.,#295161); +#295161 = SURFACE_SIDE_STYLE('',(#295162)); +#295162 = SURFACE_STYLE_FILL_AREA(#295163); +#295163 = FILL_AREA_STYLE('',(#295164)); +#295164 = FILL_AREA_STYLE_COLOUR('',#270441); +#295165 = CURVE_STYLE('',#295166,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295166 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295167 = STYLED_ITEM('color',(#295168),#42333); +#295168 = PRESENTATION_STYLE_ASSIGNMENT((#295169,#295174)); +#295169 = SURFACE_STYLE_USAGE(.BOTH.,#295170); +#295170 = SURFACE_SIDE_STYLE('',(#295171)); +#295171 = SURFACE_STYLE_FILL_AREA(#295172); +#295172 = FILL_AREA_STYLE('',(#295173)); +#295173 = FILL_AREA_STYLE_COLOUR('',#270441); +#295174 = CURVE_STYLE('',#295175,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295175 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295176 = STYLED_ITEM('color',(#295177),#42350); +#295177 = PRESENTATION_STYLE_ASSIGNMENT((#295178,#295183)); +#295178 = SURFACE_STYLE_USAGE(.BOTH.,#295179); +#295179 = SURFACE_SIDE_STYLE('',(#295180)); +#295180 = SURFACE_STYLE_FILL_AREA(#295181); +#295181 = FILL_AREA_STYLE('',(#295182)); +#295182 = FILL_AREA_STYLE_COLOUR('',#270441); +#295183 = CURVE_STYLE('',#295184,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295184 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295185 = STYLED_ITEM('color',(#295186),#42367); +#295186 = PRESENTATION_STYLE_ASSIGNMENT((#295187,#295192)); +#295187 = SURFACE_STYLE_USAGE(.BOTH.,#295188); +#295188 = SURFACE_SIDE_STYLE('',(#295189)); +#295189 = SURFACE_STYLE_FILL_AREA(#295190); +#295190 = FILL_AREA_STYLE('',(#295191)); +#295191 = FILL_AREA_STYLE_COLOUR('',#270441); +#295192 = CURVE_STYLE('',#295193,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295193 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295194 = STYLED_ITEM('color',(#295195),#42384); +#295195 = PRESENTATION_STYLE_ASSIGNMENT((#295196,#295201)); +#295196 = SURFACE_STYLE_USAGE(.BOTH.,#295197); +#295197 = SURFACE_SIDE_STYLE('',(#295198)); +#295198 = SURFACE_STYLE_FILL_AREA(#295199); +#295199 = FILL_AREA_STYLE('',(#295200)); +#295200 = FILL_AREA_STYLE_COLOUR('',#270441); +#295201 = CURVE_STYLE('',#295202,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295202 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295203 = STYLED_ITEM('color',(#295204),#42401); +#295204 = PRESENTATION_STYLE_ASSIGNMENT((#295205,#295210)); +#295205 = SURFACE_STYLE_USAGE(.BOTH.,#295206); +#295206 = SURFACE_SIDE_STYLE('',(#295207)); +#295207 = SURFACE_STYLE_FILL_AREA(#295208); +#295208 = FILL_AREA_STYLE('',(#295209)); +#295209 = FILL_AREA_STYLE_COLOUR('',#270441); +#295210 = CURVE_STYLE('',#295211,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295211 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295212 = STYLED_ITEM('color',(#295213),#42413); +#295213 = PRESENTATION_STYLE_ASSIGNMENT((#295214,#295219)); +#295214 = SURFACE_STYLE_USAGE(.BOTH.,#295215); +#295215 = SURFACE_SIDE_STYLE('',(#295216)); +#295216 = SURFACE_STYLE_FILL_AREA(#295217); +#295217 = FILL_AREA_STYLE('',(#295218)); +#295218 = FILL_AREA_STYLE_COLOUR('',#270441); +#295219 = CURVE_STYLE('',#295220,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295220 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295221 = STYLED_ITEM('color',(#295222),#42430); +#295222 = PRESENTATION_STYLE_ASSIGNMENT((#295223,#295228)); +#295223 = SURFACE_STYLE_USAGE(.BOTH.,#295224); +#295224 = SURFACE_SIDE_STYLE('',(#295225)); +#295225 = SURFACE_STYLE_FILL_AREA(#295226); +#295226 = FILL_AREA_STYLE('',(#295227)); +#295227 = FILL_AREA_STYLE_COLOUR('',#270441); +#295228 = CURVE_STYLE('',#295229,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295229 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295230 = STYLED_ITEM('color',(#295231),#42447); +#295231 = PRESENTATION_STYLE_ASSIGNMENT((#295232,#295237)); +#295232 = SURFACE_STYLE_USAGE(.BOTH.,#295233); +#295233 = SURFACE_SIDE_STYLE('',(#295234)); +#295234 = SURFACE_STYLE_FILL_AREA(#295235); +#295235 = FILL_AREA_STYLE('',(#295236)); +#295236 = FILL_AREA_STYLE_COLOUR('',#270441); +#295237 = CURVE_STYLE('',#295238,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295238 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295239 = STYLED_ITEM('color',(#295240),#42464); +#295240 = PRESENTATION_STYLE_ASSIGNMENT((#295241,#295246)); +#295241 = SURFACE_STYLE_USAGE(.BOTH.,#295242); +#295242 = SURFACE_SIDE_STYLE('',(#295243)); +#295243 = SURFACE_STYLE_FILL_AREA(#295244); +#295244 = FILL_AREA_STYLE('',(#295245)); +#295245 = FILL_AREA_STYLE_COLOUR('',#270441); +#295246 = CURVE_STYLE('',#295247,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295247 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295248 = STYLED_ITEM('color',(#295249),#42481); +#295249 = PRESENTATION_STYLE_ASSIGNMENT((#295250,#295255)); +#295250 = SURFACE_STYLE_USAGE(.BOTH.,#295251); +#295251 = SURFACE_SIDE_STYLE('',(#295252)); +#295252 = SURFACE_STYLE_FILL_AREA(#295253); +#295253 = FILL_AREA_STYLE('',(#295254)); +#295254 = FILL_AREA_STYLE_COLOUR('',#270441); +#295255 = CURVE_STYLE('',#295256,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295256 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295257 = STYLED_ITEM('color',(#295258),#42498); +#295258 = PRESENTATION_STYLE_ASSIGNMENT((#295259,#295264)); +#295259 = SURFACE_STYLE_USAGE(.BOTH.,#295260); +#295260 = SURFACE_SIDE_STYLE('',(#295261)); +#295261 = SURFACE_STYLE_FILL_AREA(#295262); +#295262 = FILL_AREA_STYLE('',(#295263)); +#295263 = FILL_AREA_STYLE_COLOUR('',#270441); +#295264 = CURVE_STYLE('',#295265,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295265 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295266 = STYLED_ITEM('color',(#295267),#42515); +#295267 = PRESENTATION_STYLE_ASSIGNMENT((#295268,#295273)); +#295268 = SURFACE_STYLE_USAGE(.BOTH.,#295269); +#295269 = SURFACE_SIDE_STYLE('',(#295270)); +#295270 = SURFACE_STYLE_FILL_AREA(#295271); +#295271 = FILL_AREA_STYLE('',(#295272)); +#295272 = FILL_AREA_STYLE_COLOUR('',#270441); +#295273 = CURVE_STYLE('',#295274,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295274 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295275 = STYLED_ITEM('color',(#295276),#42532); +#295276 = PRESENTATION_STYLE_ASSIGNMENT((#295277,#295282)); +#295277 = SURFACE_STYLE_USAGE(.BOTH.,#295278); +#295278 = SURFACE_SIDE_STYLE('',(#295279)); +#295279 = SURFACE_STYLE_FILL_AREA(#295280); +#295280 = FILL_AREA_STYLE('',(#295281)); +#295281 = FILL_AREA_STYLE_COLOUR('',#270441); +#295282 = CURVE_STYLE('',#295283,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295283 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295284 = STYLED_ITEM('color',(#295285),#42544); +#295285 = PRESENTATION_STYLE_ASSIGNMENT((#295286,#295291)); +#295286 = SURFACE_STYLE_USAGE(.BOTH.,#295287); +#295287 = SURFACE_SIDE_STYLE('',(#295288)); +#295288 = SURFACE_STYLE_FILL_AREA(#295289); +#295289 = FILL_AREA_STYLE('',(#295290)); +#295290 = FILL_AREA_STYLE_COLOUR('',#270441); +#295291 = CURVE_STYLE('',#295292,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295292 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295293 = STYLED_ITEM('color',(#295294),#42561); +#295294 = PRESENTATION_STYLE_ASSIGNMENT((#295295,#295300)); +#295295 = SURFACE_STYLE_USAGE(.BOTH.,#295296); +#295296 = SURFACE_SIDE_STYLE('',(#295297)); +#295297 = SURFACE_STYLE_FILL_AREA(#295298); +#295298 = FILL_AREA_STYLE('',(#295299)); +#295299 = FILL_AREA_STYLE_COLOUR('',#270441); +#295300 = CURVE_STYLE('',#295301,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295301 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295302 = STYLED_ITEM('color',(#295303),#42578); +#295303 = PRESENTATION_STYLE_ASSIGNMENT((#295304,#295309)); +#295304 = SURFACE_STYLE_USAGE(.BOTH.,#295305); +#295305 = SURFACE_SIDE_STYLE('',(#295306)); +#295306 = SURFACE_STYLE_FILL_AREA(#295307); +#295307 = FILL_AREA_STYLE('',(#295308)); +#295308 = FILL_AREA_STYLE_COLOUR('',#270441); +#295309 = CURVE_STYLE('',#295310,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295310 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295311 = STYLED_ITEM('color',(#295312),#42595); +#295312 = PRESENTATION_STYLE_ASSIGNMENT((#295313,#295318)); +#295313 = SURFACE_STYLE_USAGE(.BOTH.,#295314); +#295314 = SURFACE_SIDE_STYLE('',(#295315)); +#295315 = SURFACE_STYLE_FILL_AREA(#295316); +#295316 = FILL_AREA_STYLE('',(#295317)); +#295317 = FILL_AREA_STYLE_COLOUR('',#270441); +#295318 = CURVE_STYLE('',#295319,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295319 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295320 = STYLED_ITEM('color',(#295321),#42612); +#295321 = PRESENTATION_STYLE_ASSIGNMENT((#295322,#295327)); +#295322 = SURFACE_STYLE_USAGE(.BOTH.,#295323); +#295323 = SURFACE_SIDE_STYLE('',(#295324)); +#295324 = SURFACE_STYLE_FILL_AREA(#295325); +#295325 = FILL_AREA_STYLE('',(#295326)); +#295326 = FILL_AREA_STYLE_COLOUR('',#270441); +#295327 = CURVE_STYLE('',#295328,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295328 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295329 = STYLED_ITEM('color',(#295330),#42629); +#295330 = PRESENTATION_STYLE_ASSIGNMENT((#295331,#295336)); +#295331 = SURFACE_STYLE_USAGE(.BOTH.,#295332); +#295332 = SURFACE_SIDE_STYLE('',(#295333)); +#295333 = SURFACE_STYLE_FILL_AREA(#295334); +#295334 = FILL_AREA_STYLE('',(#295335)); +#295335 = FILL_AREA_STYLE_COLOUR('',#270441); +#295336 = CURVE_STYLE('',#295337,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295337 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295338 = STYLED_ITEM('color',(#295339),#42646); +#295339 = PRESENTATION_STYLE_ASSIGNMENT((#295340,#295345)); +#295340 = SURFACE_STYLE_USAGE(.BOTH.,#295341); +#295341 = SURFACE_SIDE_STYLE('',(#295342)); +#295342 = SURFACE_STYLE_FILL_AREA(#295343); +#295343 = FILL_AREA_STYLE('',(#295344)); +#295344 = FILL_AREA_STYLE_COLOUR('',#270441); +#295345 = CURVE_STYLE('',#295346,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295346 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295347 = STYLED_ITEM('color',(#295348),#42663); +#295348 = PRESENTATION_STYLE_ASSIGNMENT((#295349,#295354)); +#295349 = SURFACE_STYLE_USAGE(.BOTH.,#295350); +#295350 = SURFACE_SIDE_STYLE('',(#295351)); +#295351 = SURFACE_STYLE_FILL_AREA(#295352); +#295352 = FILL_AREA_STYLE('',(#295353)); +#295353 = FILL_AREA_STYLE_COLOUR('',#270441); +#295354 = CURVE_STYLE('',#295355,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#295355 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295356 = STYLED_ITEM('color',(#295357),#42675); +#295357 = PRESENTATION_STYLE_ASSIGNMENT((#295358,#295363)); +#295358 = SURFACE_STYLE_USAGE(.BOTH.,#295359); +#295359 = SURFACE_SIDE_STYLE('',(#295360)); +#295360 = SURFACE_STYLE_FILL_AREA(#295361); +#295361 = FILL_AREA_STYLE('',(#295362)); +#295362 = FILL_AREA_STYLE_COLOUR('',#271711); +#295363 = CURVE_STYLE('',#295364,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#295364 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#295365 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #295366),#96585); +#295366 = STYLED_ITEM('color',(#295367),#96097); +#295367 = PRESENTATION_STYLE_ASSIGNMENT((#295368)); +#295368 = SURFACE_STYLE_USAGE(.BOTH.,#295369); +#295369 = SURFACE_SIDE_STYLE('',(#295370)); +#295370 = SURFACE_STYLE_FILL_AREA(#295371); +#295371 = FILL_AREA_STYLE('',(#295372)); +#295372 = FILL_AREA_STYLE_COLOUR('',#270441); +#295373 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #295374,#295382,#295389,#295396,#295403,#295410,#295417,#295424, + #295431,#295438,#295445,#295452,#295459,#295466,#295473,#295480, + #295487,#295494,#295501,#295508,#295515,#295522,#295529,#295536, + #295543,#295550,#295557,#295564,#295571,#295578,#295585,#295592, + #295599,#295606,#295613,#295620,#295627,#295634,#295641,#295648, + #295655,#295662,#295669,#295676,#295683,#295690,#295698,#295705, + #295712,#295719,#295726,#295733,#295740,#295747,#295754,#295761, + #295768,#295775,#295782,#295789,#295796,#295803,#295810,#295817, + #295824,#295831,#295838,#295845,#295852,#295859,#295866,#295873, + #295880,#295887,#295894,#295901,#295908,#295915,#295922,#295929, + #295936,#295943,#295950,#295957,#295964,#295971,#295978,#295985, + #295992),#14729); +#295374 = STYLED_ITEM('color',(#295375),#12016); +#295375 = PRESENTATION_STYLE_ASSIGNMENT((#295376)); +#295376 = SURFACE_STYLE_USAGE(.BOTH.,#295377); +#295377 = SURFACE_SIDE_STYLE('',(#295378)); +#295378 = SURFACE_STYLE_FILL_AREA(#295379); +#295379 = FILL_AREA_STYLE('',(#295380)); +#295380 = FILL_AREA_STYLE_COLOUR('',#295381); +#295381 = COLOUR_RGB('',0.894117649055,0.890196087049,0.811764731185); +#295382 = STYLED_ITEM('color',(#295383),#12088); +#295383 = PRESENTATION_STYLE_ASSIGNMENT((#295384)); +#295384 = SURFACE_STYLE_USAGE(.BOTH.,#295385); +#295385 = SURFACE_SIDE_STYLE('',(#295386)); +#295386 = SURFACE_STYLE_FILL_AREA(#295387); +#295387 = FILL_AREA_STYLE('',(#295388)); +#295388 = FILL_AREA_STYLE_COLOUR('',#295381); +#295389 = STYLED_ITEM('color',(#295390),#12127); +#295390 = PRESENTATION_STYLE_ASSIGNMENT((#295391)); +#295391 = SURFACE_STYLE_USAGE(.BOTH.,#295392); +#295392 = SURFACE_SIDE_STYLE('',(#295393)); +#295393 = SURFACE_STYLE_FILL_AREA(#295394); +#295394 = FILL_AREA_STYLE('',(#295395)); +#295395 = FILL_AREA_STYLE_COLOUR('',#295381); +#295396 = STYLED_ITEM('color',(#295397),#12151); +#295397 = PRESENTATION_STYLE_ASSIGNMENT((#295398)); +#295398 = SURFACE_STYLE_USAGE(.BOTH.,#295399); +#295399 = SURFACE_SIDE_STYLE('',(#295400)); +#295400 = SURFACE_STYLE_FILL_AREA(#295401); +#295401 = FILL_AREA_STYLE('',(#295402)); +#295402 = FILL_AREA_STYLE_COLOUR('',#295381); +#295403 = STYLED_ITEM('color',(#295404),#12216); +#295404 = PRESENTATION_STYLE_ASSIGNMENT((#295405)); +#295405 = SURFACE_STYLE_USAGE(.BOTH.,#295406); +#295406 = SURFACE_SIDE_STYLE('',(#295407)); +#295407 = SURFACE_STYLE_FILL_AREA(#295408); +#295408 = FILL_AREA_STYLE('',(#295409)); +#295409 = FILL_AREA_STYLE_COLOUR('',#295381); +#295410 = STYLED_ITEM('color',(#295411),#12240); +#295411 = PRESENTATION_STYLE_ASSIGNMENT((#295412)); +#295412 = SURFACE_STYLE_USAGE(.BOTH.,#295413); +#295413 = SURFACE_SIDE_STYLE('',(#295414)); +#295414 = SURFACE_STYLE_FILL_AREA(#295415); +#295415 = FILL_AREA_STYLE('',(#295416)); +#295416 = FILL_AREA_STYLE_COLOUR('',#295381); +#295417 = STYLED_ITEM('color',(#295418),#12328); +#295418 = PRESENTATION_STYLE_ASSIGNMENT((#295419)); +#295419 = SURFACE_STYLE_USAGE(.BOTH.,#295420); +#295420 = SURFACE_SIDE_STYLE('',(#295421)); +#295421 = SURFACE_STYLE_FILL_AREA(#295422); +#295422 = FILL_AREA_STYLE('',(#295423)); +#295423 = FILL_AREA_STYLE_COLOUR('',#295381); +#295424 = STYLED_ITEM('color',(#295425),#12352); +#295425 = PRESENTATION_STYLE_ASSIGNMENT((#295426)); +#295426 = SURFACE_STYLE_USAGE(.BOTH.,#295427); +#295427 = SURFACE_SIDE_STYLE('',(#295428)); +#295428 = SURFACE_STYLE_FILL_AREA(#295429); +#295429 = FILL_AREA_STYLE('',(#295430)); +#295430 = FILL_AREA_STYLE_COLOUR('',#295381); +#295431 = STYLED_ITEM('color',(#295432),#12417); +#295432 = PRESENTATION_STYLE_ASSIGNMENT((#295433)); +#295433 = SURFACE_STYLE_USAGE(.BOTH.,#295434); +#295434 = SURFACE_SIDE_STYLE('',(#295435)); +#295435 = SURFACE_STYLE_FILL_AREA(#295436); +#295436 = FILL_AREA_STYLE('',(#295437)); +#295437 = FILL_AREA_STYLE_COLOUR('',#295381); +#295438 = STYLED_ITEM('color',(#295439),#12442); +#295439 = PRESENTATION_STYLE_ASSIGNMENT((#295440)); +#295440 = SURFACE_STYLE_USAGE(.BOTH.,#295441); +#295441 = SURFACE_SIDE_STYLE('',(#295442)); +#295442 = SURFACE_STYLE_FILL_AREA(#295443); +#295443 = FILL_AREA_STYLE('',(#295444)); +#295444 = FILL_AREA_STYLE_COLOUR('',#295381); +#295445 = STYLED_ITEM('color',(#295446),#12491); +#295446 = PRESENTATION_STYLE_ASSIGNMENT((#295447)); +#295447 = SURFACE_STYLE_USAGE(.BOTH.,#295448); +#295448 = SURFACE_SIDE_STYLE('',(#295449)); +#295449 = SURFACE_STYLE_FILL_AREA(#295450); +#295450 = FILL_AREA_STYLE('',(#295451)); +#295451 = FILL_AREA_STYLE_COLOUR('',#295381); +#295452 = STYLED_ITEM('color',(#295453),#12508); +#295453 = PRESENTATION_STYLE_ASSIGNMENT((#295454)); +#295454 = SURFACE_STYLE_USAGE(.BOTH.,#295455); +#295455 = SURFACE_SIDE_STYLE('',(#295456)); +#295456 = SURFACE_STYLE_FILL_AREA(#295457); +#295457 = FILL_AREA_STYLE('',(#295458)); +#295458 = FILL_AREA_STYLE_COLOUR('',#295381); +#295459 = STYLED_ITEM('color',(#295460),#12532); +#295460 = PRESENTATION_STYLE_ASSIGNMENT((#295461)); +#295461 = SURFACE_STYLE_USAGE(.BOTH.,#295462); +#295462 = SURFACE_SIDE_STYLE('',(#295463)); +#295463 = SURFACE_STYLE_FILL_AREA(#295464); +#295464 = FILL_AREA_STYLE('',(#295465)); +#295465 = FILL_AREA_STYLE_COLOUR('',#295381); +#295466 = STYLED_ITEM('color',(#295467),#12549); +#295467 = PRESENTATION_STYLE_ASSIGNMENT((#295468)); +#295468 = SURFACE_STYLE_USAGE(.BOTH.,#295469); +#295469 = SURFACE_SIDE_STYLE('',(#295470)); +#295470 = SURFACE_STYLE_FILL_AREA(#295471); +#295471 = FILL_AREA_STYLE('',(#295472)); +#295472 = FILL_AREA_STYLE_COLOUR('',#295381); +#295473 = STYLED_ITEM('color',(#295474),#12687); +#295474 = PRESENTATION_STYLE_ASSIGNMENT((#295475)); +#295475 = SURFACE_STYLE_USAGE(.BOTH.,#295476); +#295476 = SURFACE_SIDE_STYLE('',(#295477)); +#295477 = SURFACE_STYLE_FILL_AREA(#295478); +#295478 = FILL_AREA_STYLE('',(#295479)); +#295479 = FILL_AREA_STYLE_COLOUR('',#295381); +#295480 = STYLED_ITEM('color',(#295481),#12711); +#295481 = PRESENTATION_STYLE_ASSIGNMENT((#295482)); +#295482 = SURFACE_STYLE_USAGE(.BOTH.,#295483); +#295483 = SURFACE_SIDE_STYLE('',(#295484)); +#295484 = SURFACE_STYLE_FILL_AREA(#295485); +#295485 = FILL_AREA_STYLE('',(#295486)); +#295486 = FILL_AREA_STYLE_COLOUR('',#295381); +#295487 = STYLED_ITEM('color',(#295488),#12881); +#295488 = PRESENTATION_STYLE_ASSIGNMENT((#295489)); +#295489 = SURFACE_STYLE_USAGE(.BOTH.,#295490); +#295490 = SURFACE_SIDE_STYLE('',(#295491)); +#295491 = SURFACE_STYLE_FILL_AREA(#295492); +#295492 = FILL_AREA_STYLE('',(#295493)); +#295493 = FILL_AREA_STYLE_COLOUR('',#295381); +#295494 = STYLED_ITEM('color',(#295495),#12905); +#295495 = PRESENTATION_STYLE_ASSIGNMENT((#295496)); +#295496 = SURFACE_STYLE_USAGE(.BOTH.,#295497); +#295497 = SURFACE_SIDE_STYLE('',(#295498)); +#295498 = SURFACE_STYLE_FILL_AREA(#295499); +#295499 = FILL_AREA_STYLE('',(#295500)); +#295500 = FILL_AREA_STYLE_COLOUR('',#295381); +#295501 = STYLED_ITEM('color',(#295502),#12938); +#295502 = PRESENTATION_STYLE_ASSIGNMENT((#295503)); +#295503 = SURFACE_STYLE_USAGE(.BOTH.,#295504); +#295504 = SURFACE_SIDE_STYLE('',(#295505)); +#295505 = SURFACE_STYLE_FILL_AREA(#295506); +#295506 = FILL_AREA_STYLE('',(#295507)); +#295507 = FILL_AREA_STYLE_COLOUR('',#295381); +#295508 = STYLED_ITEM('color',(#295509),#12962); +#295509 = PRESENTATION_STYLE_ASSIGNMENT((#295510)); +#295510 = SURFACE_STYLE_USAGE(.BOTH.,#295511); +#295511 = SURFACE_SIDE_STYLE('',(#295512)); +#295512 = SURFACE_STYLE_FILL_AREA(#295513); +#295513 = FILL_AREA_STYLE('',(#295514)); +#295514 = FILL_AREA_STYLE_COLOUR('',#295381); +#295515 = STYLED_ITEM('color',(#295516),#12993); +#295516 = PRESENTATION_STYLE_ASSIGNMENT((#295517)); +#295517 = SURFACE_STYLE_USAGE(.BOTH.,#295518); +#295518 = SURFACE_SIDE_STYLE('',(#295519)); +#295519 = SURFACE_STYLE_FILL_AREA(#295520); +#295520 = FILL_AREA_STYLE('',(#295521)); +#295521 = FILL_AREA_STYLE_COLOUR('',#295381); +#295522 = STYLED_ITEM('color',(#295523),#13010); +#295523 = PRESENTATION_STYLE_ASSIGNMENT((#295524)); +#295524 = SURFACE_STYLE_USAGE(.BOTH.,#295525); +#295525 = SURFACE_SIDE_STYLE('',(#295526)); +#295526 = SURFACE_STYLE_FILL_AREA(#295527); +#295527 = FILL_AREA_STYLE('',(#295528)); +#295528 = FILL_AREA_STYLE_COLOUR('',#295381); +#295529 = STYLED_ITEM('color',(#295530),#13043); +#295530 = PRESENTATION_STYLE_ASSIGNMENT((#295531)); +#295531 = SURFACE_STYLE_USAGE(.BOTH.,#295532); +#295532 = SURFACE_SIDE_STYLE('',(#295533)); +#295533 = SURFACE_STYLE_FILL_AREA(#295534); +#295534 = FILL_AREA_STYLE('',(#295535)); +#295535 = FILL_AREA_STYLE_COLOUR('',#295381); +#295536 = STYLED_ITEM('color',(#295537),#13067); +#295537 = PRESENTATION_STYLE_ASSIGNMENT((#295538)); +#295538 = SURFACE_STYLE_USAGE(.BOTH.,#295539); +#295539 = SURFACE_SIDE_STYLE('',(#295540)); +#295540 = SURFACE_STYLE_FILL_AREA(#295541); +#295541 = FILL_AREA_STYLE('',(#295542)); +#295542 = FILL_AREA_STYLE_COLOUR('',#295381); +#295543 = STYLED_ITEM('color',(#295544),#13098); +#295544 = PRESENTATION_STYLE_ASSIGNMENT((#295545)); +#295545 = SURFACE_STYLE_USAGE(.BOTH.,#295546); +#295546 = SURFACE_SIDE_STYLE('',(#295547)); +#295547 = SURFACE_STYLE_FILL_AREA(#295548); +#295548 = FILL_AREA_STYLE('',(#295549)); +#295549 = FILL_AREA_STYLE_COLOUR('',#295381); +#295550 = STYLED_ITEM('color',(#295551),#13110); +#295551 = PRESENTATION_STYLE_ASSIGNMENT((#295552)); +#295552 = SURFACE_STYLE_USAGE(.BOTH.,#295553); +#295553 = SURFACE_SIDE_STYLE('',(#295554)); +#295554 = SURFACE_STYLE_FILL_AREA(#295555); +#295555 = FILL_AREA_STYLE('',(#295556)); +#295556 = FILL_AREA_STYLE_COLOUR('',#295381); +#295557 = STYLED_ITEM('color',(#295558),#13143); +#295558 = PRESENTATION_STYLE_ASSIGNMENT((#295559)); +#295559 = SURFACE_STYLE_USAGE(.BOTH.,#295560); +#295560 = SURFACE_SIDE_STYLE('',(#295561)); +#295561 = SURFACE_STYLE_FILL_AREA(#295562); +#295562 = FILL_AREA_STYLE('',(#295563)); +#295563 = FILL_AREA_STYLE_COLOUR('',#295381); +#295564 = STYLED_ITEM('color',(#295565),#13160); +#295565 = PRESENTATION_STYLE_ASSIGNMENT((#295566)); +#295566 = SURFACE_STYLE_USAGE(.BOTH.,#295567); +#295567 = SURFACE_SIDE_STYLE('',(#295568)); +#295568 = SURFACE_STYLE_FILL_AREA(#295569); +#295569 = FILL_AREA_STYLE('',(#295570)); +#295570 = FILL_AREA_STYLE_COLOUR('',#295381); +#295571 = STYLED_ITEM('color',(#295572),#13177); +#295572 = PRESENTATION_STYLE_ASSIGNMENT((#295573)); +#295573 = SURFACE_STYLE_USAGE(.BOTH.,#295574); +#295574 = SURFACE_SIDE_STYLE('',(#295575)); +#295575 = SURFACE_STYLE_FILL_AREA(#295576); +#295576 = FILL_AREA_STYLE('',(#295577)); +#295577 = FILL_AREA_STYLE_COLOUR('',#295381); +#295578 = STYLED_ITEM('color',(#295579),#13189); +#295579 = PRESENTATION_STYLE_ASSIGNMENT((#295580)); +#295580 = SURFACE_STYLE_USAGE(.BOTH.,#295581); +#295581 = SURFACE_SIDE_STYLE('',(#295582)); +#295582 = SURFACE_STYLE_FILL_AREA(#295583); +#295583 = FILL_AREA_STYLE('',(#295584)); +#295584 = FILL_AREA_STYLE_COLOUR('',#295381); +#295585 = STYLED_ITEM('color',(#295586),#13269); +#295586 = PRESENTATION_STYLE_ASSIGNMENT((#295587)); +#295587 = SURFACE_STYLE_USAGE(.BOTH.,#295588); +#295588 = SURFACE_SIDE_STYLE('',(#295589)); +#295589 = SURFACE_STYLE_FILL_AREA(#295590); +#295590 = FILL_AREA_STYLE('',(#295591)); +#295591 = FILL_AREA_STYLE_COLOUR('',#295381); +#295592 = STYLED_ITEM('color',(#295593),#13286); +#295593 = PRESENTATION_STYLE_ASSIGNMENT((#295594)); +#295594 = SURFACE_STYLE_USAGE(.BOTH.,#295595); +#295595 = SURFACE_SIDE_STYLE('',(#295596)); +#295596 = SURFACE_STYLE_FILL_AREA(#295597); +#295597 = FILL_AREA_STYLE('',(#295598)); +#295598 = FILL_AREA_STYLE_COLOUR('',#295381); +#295599 = STYLED_ITEM('color',(#295600),#13303); +#295600 = PRESENTATION_STYLE_ASSIGNMENT((#295601)); +#295601 = SURFACE_STYLE_USAGE(.BOTH.,#295602); +#295602 = SURFACE_SIDE_STYLE('',(#295603)); +#295603 = SURFACE_STYLE_FILL_AREA(#295604); +#295604 = FILL_AREA_STYLE('',(#295605)); +#295605 = FILL_AREA_STYLE_COLOUR('',#295381); +#295606 = STYLED_ITEM('color',(#295607),#13320); +#295607 = PRESENTATION_STYLE_ASSIGNMENT((#295608)); +#295608 = SURFACE_STYLE_USAGE(.BOTH.,#295609); +#295609 = SURFACE_SIDE_STYLE('',(#295610)); +#295610 = SURFACE_STYLE_FILL_AREA(#295611); +#295611 = FILL_AREA_STYLE('',(#295612)); +#295612 = FILL_AREA_STYLE_COLOUR('',#295381); +#295613 = STYLED_ITEM('color',(#295614),#13337); +#295614 = PRESENTATION_STYLE_ASSIGNMENT((#295615)); +#295615 = SURFACE_STYLE_USAGE(.BOTH.,#295616); +#295616 = SURFACE_SIDE_STYLE('',(#295617)); +#295617 = SURFACE_STYLE_FILL_AREA(#295618); +#295618 = FILL_AREA_STYLE('',(#295619)); +#295619 = FILL_AREA_STYLE_COLOUR('',#295381); +#295620 = STYLED_ITEM('color',(#295621),#13354); +#295621 = PRESENTATION_STYLE_ASSIGNMENT((#295622)); +#295622 = SURFACE_STYLE_USAGE(.BOTH.,#295623); +#295623 = SURFACE_SIDE_STYLE('',(#295624)); +#295624 = SURFACE_STYLE_FILL_AREA(#295625); +#295625 = FILL_AREA_STYLE('',(#295626)); +#295626 = FILL_AREA_STYLE_COLOUR('',#295381); +#295627 = STYLED_ITEM('color',(#295628),#13371); +#295628 = PRESENTATION_STYLE_ASSIGNMENT((#295629)); +#295629 = SURFACE_STYLE_USAGE(.BOTH.,#295630); +#295630 = SURFACE_SIDE_STYLE('',(#295631)); +#295631 = SURFACE_STYLE_FILL_AREA(#295632); +#295632 = FILL_AREA_STYLE('',(#295633)); +#295633 = FILL_AREA_STYLE_COLOUR('',#295381); +#295634 = STYLED_ITEM('color',(#295635),#13388); +#295635 = PRESENTATION_STYLE_ASSIGNMENT((#295636)); +#295636 = SURFACE_STYLE_USAGE(.BOTH.,#295637); +#295637 = SURFACE_SIDE_STYLE('',(#295638)); +#295638 = SURFACE_STYLE_FILL_AREA(#295639); +#295639 = FILL_AREA_STYLE('',(#295640)); +#295640 = FILL_AREA_STYLE_COLOUR('',#295381); +#295641 = STYLED_ITEM('color',(#295642),#13405); +#295642 = PRESENTATION_STYLE_ASSIGNMENT((#295643)); +#295643 = SURFACE_STYLE_USAGE(.BOTH.,#295644); +#295644 = SURFACE_SIDE_STYLE('',(#295645)); +#295645 = SURFACE_STYLE_FILL_AREA(#295646); +#295646 = FILL_AREA_STYLE('',(#295647)); +#295647 = FILL_AREA_STYLE_COLOUR('',#295381); +#295648 = STYLED_ITEM('color',(#295649),#13422); +#295649 = PRESENTATION_STYLE_ASSIGNMENT((#295650)); +#295650 = SURFACE_STYLE_USAGE(.BOTH.,#295651); +#295651 = SURFACE_SIDE_STYLE('',(#295652)); +#295652 = SURFACE_STYLE_FILL_AREA(#295653); +#295653 = FILL_AREA_STYLE('',(#295654)); +#295654 = FILL_AREA_STYLE_COLOUR('',#295381); +#295655 = STYLED_ITEM('color',(#295656),#13439); +#295656 = PRESENTATION_STYLE_ASSIGNMENT((#295657)); +#295657 = SURFACE_STYLE_USAGE(.BOTH.,#295658); +#295658 = SURFACE_SIDE_STYLE('',(#295659)); +#295659 = SURFACE_STYLE_FILL_AREA(#295660); +#295660 = FILL_AREA_STYLE('',(#295661)); +#295661 = FILL_AREA_STYLE_COLOUR('',#295381); +#295662 = STYLED_ITEM('color',(#295663),#13451); +#295663 = PRESENTATION_STYLE_ASSIGNMENT((#295664)); +#295664 = SURFACE_STYLE_USAGE(.BOTH.,#295665); +#295665 = SURFACE_SIDE_STYLE('',(#295666)); +#295666 = SURFACE_STYLE_FILL_AREA(#295667); +#295667 = FILL_AREA_STYLE('',(#295668)); +#295668 = FILL_AREA_STYLE_COLOUR('',#295381); +#295669 = STYLED_ITEM('color',(#295670),#13468); +#295670 = PRESENTATION_STYLE_ASSIGNMENT((#295671)); +#295671 = SURFACE_STYLE_USAGE(.BOTH.,#295672); +#295672 = SURFACE_SIDE_STYLE('',(#295673)); +#295673 = SURFACE_STYLE_FILL_AREA(#295674); +#295674 = FILL_AREA_STYLE('',(#295675)); +#295675 = FILL_AREA_STYLE_COLOUR('',#295381); +#295676 = STYLED_ITEM('color',(#295677),#13485); +#295677 = PRESENTATION_STYLE_ASSIGNMENT((#295678)); +#295678 = SURFACE_STYLE_USAGE(.BOTH.,#295679); +#295679 = SURFACE_SIDE_STYLE('',(#295680)); +#295680 = SURFACE_STYLE_FILL_AREA(#295681); +#295681 = FILL_AREA_STYLE('',(#295682)); +#295682 = FILL_AREA_STYLE_COLOUR('',#295381); +#295683 = STYLED_ITEM('color',(#295684),#13531); +#295684 = PRESENTATION_STYLE_ASSIGNMENT((#295685)); +#295685 = SURFACE_STYLE_USAGE(.BOTH.,#295686); +#295686 = SURFACE_SIDE_STYLE('',(#295687)); +#295687 = SURFACE_STYLE_FILL_AREA(#295688); +#295688 = FILL_AREA_STYLE('',(#295689)); +#295689 = FILL_AREA_STYLE_COLOUR('',#295381); +#295690 = STYLED_ITEM('color',(#295691),#13577); +#295691 = PRESENTATION_STYLE_ASSIGNMENT((#295692)); +#295692 = SURFACE_STYLE_USAGE(.BOTH.,#295693); +#295693 = SURFACE_SIDE_STYLE('',(#295694)); +#295694 = SURFACE_STYLE_FILL_AREA(#295695); +#295695 = FILL_AREA_STYLE('',(#295696)); +#295696 = FILL_AREA_STYLE_COLOUR('',#295697); +#295697 = COLOUR_RGB('',0.823529417451,0.819607860991,0.780392170416); +#295698 = STYLED_ITEM('color',(#295699),#13608); +#295699 = PRESENTATION_STYLE_ASSIGNMENT((#295700)); +#295700 = SURFACE_STYLE_USAGE(.BOTH.,#295701); +#295701 = SURFACE_SIDE_STYLE('',(#295702)); +#295702 = SURFACE_STYLE_FILL_AREA(#295703); +#295703 = FILL_AREA_STYLE('',(#295704)); +#295704 = FILL_AREA_STYLE_COLOUR('',#295697); +#295705 = STYLED_ITEM('color',(#295706),#13632); +#295706 = PRESENTATION_STYLE_ASSIGNMENT((#295707)); +#295707 = SURFACE_STYLE_USAGE(.BOTH.,#295708); +#295708 = SURFACE_SIDE_STYLE('',(#295709)); +#295709 = SURFACE_STYLE_FILL_AREA(#295710); +#295710 = FILL_AREA_STYLE('',(#295711)); +#295711 = FILL_AREA_STYLE_COLOUR('',#295697); +#295712 = STYLED_ITEM('color',(#295713),#13656); +#295713 = PRESENTATION_STYLE_ASSIGNMENT((#295714)); +#295714 = SURFACE_STYLE_USAGE(.BOTH.,#295715); +#295715 = SURFACE_SIDE_STYLE('',(#295716)); +#295716 = SURFACE_STYLE_FILL_AREA(#295717); +#295717 = FILL_AREA_STYLE('',(#295718)); +#295718 = FILL_AREA_STYLE_COLOUR('',#295697); +#295719 = STYLED_ITEM('color',(#295720),#13673); +#295720 = PRESENTATION_STYLE_ASSIGNMENT((#295721)); +#295721 = SURFACE_STYLE_USAGE(.BOTH.,#295722); +#295722 = SURFACE_SIDE_STYLE('',(#295723)); +#295723 = SURFACE_STYLE_FILL_AREA(#295724); +#295724 = FILL_AREA_STYLE('',(#295725)); +#295725 = FILL_AREA_STYLE_COLOUR('',#295697); +#295726 = STYLED_ITEM('color',(#295727),#13704); +#295727 = PRESENTATION_STYLE_ASSIGNMENT((#295728)); +#295728 = SURFACE_STYLE_USAGE(.BOTH.,#295729); +#295729 = SURFACE_SIDE_STYLE('',(#295730)); +#295730 = SURFACE_STYLE_FILL_AREA(#295731); +#295731 = FILL_AREA_STYLE('',(#295732)); +#295732 = FILL_AREA_STYLE_COLOUR('',#295697); +#295733 = STYLED_ITEM('color',(#295734),#13728); +#295734 = PRESENTATION_STYLE_ASSIGNMENT((#295735)); +#295735 = SURFACE_STYLE_USAGE(.BOTH.,#295736); +#295736 = SURFACE_SIDE_STYLE('',(#295737)); +#295737 = SURFACE_STYLE_FILL_AREA(#295738); +#295738 = FILL_AREA_STYLE('',(#295739)); +#295739 = FILL_AREA_STYLE_COLOUR('',#295697); +#295740 = STYLED_ITEM('color',(#295741),#13752); +#295741 = PRESENTATION_STYLE_ASSIGNMENT((#295742)); +#295742 = SURFACE_STYLE_USAGE(.BOTH.,#295743); +#295743 = SURFACE_SIDE_STYLE('',(#295744)); +#295744 = SURFACE_STYLE_FILL_AREA(#295745); +#295745 = FILL_AREA_STYLE('',(#295746)); +#295746 = FILL_AREA_STYLE_COLOUR('',#295697); +#295747 = STYLED_ITEM('color',(#295748),#13769); +#295748 = PRESENTATION_STYLE_ASSIGNMENT((#295749)); +#295749 = SURFACE_STYLE_USAGE(.BOTH.,#295750); +#295750 = SURFACE_SIDE_STYLE('',(#295751)); +#295751 = SURFACE_STYLE_FILL_AREA(#295752); +#295752 = FILL_AREA_STYLE('',(#295753)); +#295753 = FILL_AREA_STYLE_COLOUR('',#295697); +#295754 = STYLED_ITEM('color',(#295755),#13832); +#295755 = PRESENTATION_STYLE_ASSIGNMENT((#295756)); +#295756 = SURFACE_STYLE_USAGE(.BOTH.,#295757); +#295757 = SURFACE_SIDE_STYLE('',(#295758)); +#295758 = SURFACE_STYLE_FILL_AREA(#295759); +#295759 = FILL_AREA_STYLE('',(#295760)); +#295760 = FILL_AREA_STYLE_COLOUR('',#295697); +#295761 = STYLED_ITEM('color',(#295762),#13856); +#295762 = PRESENTATION_STYLE_ASSIGNMENT((#295763)); +#295763 = SURFACE_STYLE_USAGE(.BOTH.,#295764); +#295764 = SURFACE_SIDE_STYLE('',(#295765)); +#295765 = SURFACE_STYLE_FILL_AREA(#295766); +#295766 = FILL_AREA_STYLE('',(#295767)); +#295767 = FILL_AREA_STYLE_COLOUR('',#295697); +#295768 = STYLED_ITEM('color',(#295769),#13912); +#295769 = PRESENTATION_STYLE_ASSIGNMENT((#295770)); +#295770 = SURFACE_STYLE_USAGE(.BOTH.,#295771); +#295771 = SURFACE_SIDE_STYLE('',(#295772)); +#295772 = SURFACE_STYLE_FILL_AREA(#295773); +#295773 = FILL_AREA_STYLE('',(#295774)); +#295774 = FILL_AREA_STYLE_COLOUR('',#295697); +#295775 = STYLED_ITEM('color',(#295776),#13929); +#295776 = PRESENTATION_STYLE_ASSIGNMENT((#295777)); +#295777 = SURFACE_STYLE_USAGE(.BOTH.,#295778); +#295778 = SURFACE_SIDE_STYLE('',(#295779)); +#295779 = SURFACE_STYLE_FILL_AREA(#295780); +#295780 = FILL_AREA_STYLE('',(#295781)); +#295781 = FILL_AREA_STYLE_COLOUR('',#295697); +#295782 = STYLED_ITEM('color',(#295783),#13992); +#295783 = PRESENTATION_STYLE_ASSIGNMENT((#295784)); +#295784 = SURFACE_STYLE_USAGE(.BOTH.,#295785); +#295785 = SURFACE_SIDE_STYLE('',(#295786)); +#295786 = SURFACE_STYLE_FILL_AREA(#295787); +#295787 = FILL_AREA_STYLE('',(#295788)); +#295788 = FILL_AREA_STYLE_COLOUR('',#295697); +#295789 = STYLED_ITEM('color',(#295790),#14016); +#295790 = PRESENTATION_STYLE_ASSIGNMENT((#295791)); +#295791 = SURFACE_STYLE_USAGE(.BOTH.,#295792); +#295792 = SURFACE_SIDE_STYLE('',(#295793)); +#295793 = SURFACE_STYLE_FILL_AREA(#295794); +#295794 = FILL_AREA_STYLE('',(#295795)); +#295795 = FILL_AREA_STYLE_COLOUR('',#295697); +#295796 = STYLED_ITEM('color',(#295797),#14072); +#295797 = PRESENTATION_STYLE_ASSIGNMENT((#295798)); +#295798 = SURFACE_STYLE_USAGE(.BOTH.,#295799); +#295799 = SURFACE_SIDE_STYLE('',(#295800)); +#295800 = SURFACE_STYLE_FILL_AREA(#295801); +#295801 = FILL_AREA_STYLE('',(#295802)); +#295802 = FILL_AREA_STYLE_COLOUR('',#295697); +#295803 = STYLED_ITEM('color',(#295804),#14089); +#295804 = PRESENTATION_STYLE_ASSIGNMENT((#295805)); +#295805 = SURFACE_STYLE_USAGE(.BOTH.,#295806); +#295806 = SURFACE_SIDE_STYLE('',(#295807)); +#295807 = SURFACE_STYLE_FILL_AREA(#295808); +#295808 = FILL_AREA_STYLE('',(#295809)); +#295809 = FILL_AREA_STYLE_COLOUR('',#295697); +#295810 = STYLED_ITEM('color',(#295811),#14120); +#295811 = PRESENTATION_STYLE_ASSIGNMENT((#295812)); +#295812 = SURFACE_STYLE_USAGE(.BOTH.,#295813); +#295813 = SURFACE_SIDE_STYLE('',(#295814)); +#295814 = SURFACE_STYLE_FILL_AREA(#295815); +#295815 = FILL_AREA_STYLE('',(#295816)); +#295816 = FILL_AREA_STYLE_COLOUR('',#295697); +#295817 = STYLED_ITEM('color',(#295818),#14144); +#295818 = PRESENTATION_STYLE_ASSIGNMENT((#295819)); +#295819 = SURFACE_STYLE_USAGE(.BOTH.,#295820); +#295820 = SURFACE_SIDE_STYLE('',(#295821)); +#295821 = SURFACE_STYLE_FILL_AREA(#295822); +#295822 = FILL_AREA_STYLE('',(#295823)); +#295823 = FILL_AREA_STYLE_COLOUR('',#295697); +#295824 = STYLED_ITEM('color',(#295825),#14168); +#295825 = PRESENTATION_STYLE_ASSIGNMENT((#295826)); +#295826 = SURFACE_STYLE_USAGE(.BOTH.,#295827); +#295827 = SURFACE_SIDE_STYLE('',(#295828)); +#295828 = SURFACE_STYLE_FILL_AREA(#295829); +#295829 = FILL_AREA_STYLE('',(#295830)); +#295830 = FILL_AREA_STYLE_COLOUR('',#295697); +#295831 = STYLED_ITEM('color',(#295832),#14185); +#295832 = PRESENTATION_STYLE_ASSIGNMENT((#295833)); +#295833 = SURFACE_STYLE_USAGE(.BOTH.,#295834); +#295834 = SURFACE_SIDE_STYLE('',(#295835)); +#295835 = SURFACE_STYLE_FILL_AREA(#295836); +#295836 = FILL_AREA_STYLE('',(#295837)); +#295837 = FILL_AREA_STYLE_COLOUR('',#295697); +#295838 = STYLED_ITEM('color',(#295839),#14216); +#295839 = PRESENTATION_STYLE_ASSIGNMENT((#295840)); +#295840 = SURFACE_STYLE_USAGE(.BOTH.,#295841); +#295841 = SURFACE_SIDE_STYLE('',(#295842)); +#295842 = SURFACE_STYLE_FILL_AREA(#295843); +#295843 = FILL_AREA_STYLE('',(#295844)); +#295844 = FILL_AREA_STYLE_COLOUR('',#295697); +#295845 = STYLED_ITEM('color',(#295846),#14240); +#295846 = PRESENTATION_STYLE_ASSIGNMENT((#295847)); +#295847 = SURFACE_STYLE_USAGE(.BOTH.,#295848); +#295848 = SURFACE_SIDE_STYLE('',(#295849)); +#295849 = SURFACE_STYLE_FILL_AREA(#295850); +#295850 = FILL_AREA_STYLE('',(#295851)); +#295851 = FILL_AREA_STYLE_COLOUR('',#295697); +#295852 = STYLED_ITEM('color',(#295853),#14264); +#295853 = PRESENTATION_STYLE_ASSIGNMENT((#295854)); +#295854 = SURFACE_STYLE_USAGE(.BOTH.,#295855); +#295855 = SURFACE_SIDE_STYLE('',(#295856)); +#295856 = SURFACE_STYLE_FILL_AREA(#295857); +#295857 = FILL_AREA_STYLE('',(#295858)); +#295858 = FILL_AREA_STYLE_COLOUR('',#295697); +#295859 = STYLED_ITEM('color',(#295860),#14281); +#295860 = PRESENTATION_STYLE_ASSIGNMENT((#295861)); +#295861 = SURFACE_STYLE_USAGE(.BOTH.,#295862); +#295862 = SURFACE_SIDE_STYLE('',(#295863)); +#295863 = SURFACE_STYLE_FILL_AREA(#295864); +#295864 = FILL_AREA_STYLE('',(#295865)); +#295865 = FILL_AREA_STYLE_COLOUR('',#295697); +#295866 = STYLED_ITEM('color',(#295867),#14328); +#295867 = PRESENTATION_STYLE_ASSIGNMENT((#295868)); +#295868 = SURFACE_STYLE_USAGE(.BOTH.,#295869); +#295869 = SURFACE_SIDE_STYLE('',(#295870)); +#295870 = SURFACE_STYLE_FILL_AREA(#295871); +#295871 = FILL_AREA_STYLE('',(#295872)); +#295872 = FILL_AREA_STYLE_COLOUR('',#295697); +#295873 = STYLED_ITEM('color',(#295874),#14359); +#295874 = PRESENTATION_STYLE_ASSIGNMENT((#295875)); +#295875 = SURFACE_STYLE_USAGE(.BOTH.,#295876); +#295876 = SURFACE_SIDE_STYLE('',(#295877)); +#295877 = SURFACE_STYLE_FILL_AREA(#295878); +#295878 = FILL_AREA_STYLE('',(#295879)); +#295879 = FILL_AREA_STYLE_COLOUR('',#295697); +#295880 = STYLED_ITEM('color',(#295881),#14371); +#295881 = PRESENTATION_STYLE_ASSIGNMENT((#295882)); +#295882 = SURFACE_STYLE_USAGE(.BOTH.,#295883); +#295883 = SURFACE_SIDE_STYLE('',(#295884)); +#295884 = SURFACE_STYLE_FILL_AREA(#295885); +#295885 = FILL_AREA_STYLE('',(#295886)); +#295886 = FILL_AREA_STYLE_COLOUR('',#295697); +#295887 = STYLED_ITEM('color',(#295888),#14388); +#295888 = PRESENTATION_STYLE_ASSIGNMENT((#295889)); +#295889 = SURFACE_STYLE_USAGE(.BOTH.,#295890); +#295890 = SURFACE_SIDE_STYLE('',(#295891)); +#295891 = SURFACE_STYLE_FILL_AREA(#295892); +#295892 = FILL_AREA_STYLE('',(#295893)); +#295893 = FILL_AREA_STYLE_COLOUR('',#295697); +#295894 = STYLED_ITEM('color',(#295895),#14414); +#295895 = PRESENTATION_STYLE_ASSIGNMENT((#295896)); +#295896 = SURFACE_STYLE_USAGE(.BOTH.,#295897); +#295897 = SURFACE_SIDE_STYLE('',(#295898)); +#295898 = SURFACE_STYLE_FILL_AREA(#295899); +#295899 = FILL_AREA_STYLE('',(#295900)); +#295900 = FILL_AREA_STYLE_COLOUR('',#295697); +#295901 = STYLED_ITEM('color',(#295902),#14447); +#295902 = PRESENTATION_STYLE_ASSIGNMENT((#295903)); +#295903 = SURFACE_STYLE_USAGE(.BOTH.,#295904); +#295904 = SURFACE_SIDE_STYLE('',(#295905)); +#295905 = SURFACE_STYLE_FILL_AREA(#295906); +#295906 = FILL_AREA_STYLE('',(#295907)); +#295907 = FILL_AREA_STYLE_COLOUR('',#295697); +#295908 = STYLED_ITEM('color',(#295909),#14494); +#295909 = PRESENTATION_STYLE_ASSIGNMENT((#295910)); +#295910 = SURFACE_STYLE_USAGE(.BOTH.,#295911); +#295911 = SURFACE_SIDE_STYLE('',(#295912)); +#295912 = SURFACE_STYLE_FILL_AREA(#295913); +#295913 = FILL_AREA_STYLE('',(#295914)); +#295914 = FILL_AREA_STYLE_COLOUR('',#295697); +#295915 = STYLED_ITEM('color',(#295916),#14525); +#295916 = PRESENTATION_STYLE_ASSIGNMENT((#295917)); +#295917 = SURFACE_STYLE_USAGE(.BOTH.,#295918); +#295918 = SURFACE_SIDE_STYLE('',(#295919)); +#295919 = SURFACE_STYLE_FILL_AREA(#295920); +#295920 = FILL_AREA_STYLE('',(#295921)); +#295921 = FILL_AREA_STYLE_COLOUR('',#295697); +#295922 = STYLED_ITEM('color',(#295923),#14537); +#295923 = PRESENTATION_STYLE_ASSIGNMENT((#295924)); +#295924 = SURFACE_STYLE_USAGE(.BOTH.,#295925); +#295925 = SURFACE_SIDE_STYLE('',(#295926)); +#295926 = SURFACE_STYLE_FILL_AREA(#295927); +#295927 = FILL_AREA_STYLE('',(#295928)); +#295928 = FILL_AREA_STYLE_COLOUR('',#295697); +#295929 = STYLED_ITEM('color',(#295930),#14554); +#295930 = PRESENTATION_STYLE_ASSIGNMENT((#295931)); +#295931 = SURFACE_STYLE_USAGE(.BOTH.,#295932); +#295932 = SURFACE_SIDE_STYLE('',(#295933)); +#295933 = SURFACE_STYLE_FILL_AREA(#295934); +#295934 = FILL_AREA_STYLE('',(#295935)); +#295935 = FILL_AREA_STYLE_COLOUR('',#295697); +#295936 = STYLED_ITEM('color',(#295937),#14580); +#295937 = PRESENTATION_STYLE_ASSIGNMENT((#295938)); +#295938 = SURFACE_STYLE_USAGE(.BOTH.,#295939); +#295939 = SURFACE_SIDE_STYLE('',(#295940)); +#295940 = SURFACE_STYLE_FILL_AREA(#295941); +#295941 = FILL_AREA_STYLE('',(#295942)); +#295942 = FILL_AREA_STYLE_COLOUR('',#295697); +#295943 = STYLED_ITEM('color',(#295944),#14613); +#295944 = PRESENTATION_STYLE_ASSIGNMENT((#295945)); +#295945 = SURFACE_STYLE_USAGE(.BOTH.,#295946); +#295946 = SURFACE_SIDE_STYLE('',(#295947)); +#295947 = SURFACE_STYLE_FILL_AREA(#295948); +#295948 = FILL_AREA_STYLE('',(#295949)); +#295949 = FILL_AREA_STYLE_COLOUR('',#295697); +#295950 = STYLED_ITEM('color',(#295951),#14625); +#295951 = PRESENTATION_STYLE_ASSIGNMENT((#295952)); +#295952 = SURFACE_STYLE_USAGE(.BOTH.,#295953); +#295953 = SURFACE_SIDE_STYLE('',(#295954)); +#295954 = SURFACE_STYLE_FILL_AREA(#295955); +#295955 = FILL_AREA_STYLE('',(#295956)); +#295956 = FILL_AREA_STYLE_COLOUR('',#295697); +#295957 = STYLED_ITEM('color',(#295958),#14637); +#295958 = PRESENTATION_STYLE_ASSIGNMENT((#295959)); +#295959 = SURFACE_STYLE_USAGE(.BOTH.,#295960); +#295960 = SURFACE_SIDE_STYLE('',(#295961)); +#295961 = SURFACE_STYLE_FILL_AREA(#295962); +#295962 = FILL_AREA_STYLE('',(#295963)); +#295963 = FILL_AREA_STYLE_COLOUR('',#295697); +#295964 = STYLED_ITEM('color',(#295965),#14654); +#295965 = PRESENTATION_STYLE_ASSIGNMENT((#295966)); +#295966 = SURFACE_STYLE_USAGE(.BOTH.,#295967); +#295967 = SURFACE_SIDE_STYLE('',(#295968)); +#295968 = SURFACE_STYLE_FILL_AREA(#295969); +#295969 = FILL_AREA_STYLE('',(#295970)); +#295970 = FILL_AREA_STYLE_COLOUR('',#295697); +#295971 = STYLED_ITEM('color',(#295972),#14671); +#295972 = PRESENTATION_STYLE_ASSIGNMENT((#295973)); +#295973 = SURFACE_STYLE_USAGE(.BOTH.,#295974); +#295974 = SURFACE_SIDE_STYLE('',(#295975)); +#295975 = SURFACE_STYLE_FILL_AREA(#295976); +#295976 = FILL_AREA_STYLE('',(#295977)); +#295977 = FILL_AREA_STYLE_COLOUR('',#295697); +#295978 = STYLED_ITEM('color',(#295979),#14683); +#295979 = PRESENTATION_STYLE_ASSIGNMENT((#295980)); +#295980 = SURFACE_STYLE_USAGE(.BOTH.,#295981); +#295981 = SURFACE_SIDE_STYLE('',(#295982)); +#295982 = SURFACE_STYLE_FILL_AREA(#295983); +#295983 = FILL_AREA_STYLE('',(#295984)); +#295984 = FILL_AREA_STYLE_COLOUR('',#295697); +#295985 = STYLED_ITEM('color',(#295986),#14700); +#295986 = PRESENTATION_STYLE_ASSIGNMENT((#295987)); +#295987 = SURFACE_STYLE_USAGE(.BOTH.,#295988); +#295988 = SURFACE_SIDE_STYLE('',(#295989)); +#295989 = SURFACE_STYLE_FILL_AREA(#295990); +#295990 = FILL_AREA_STYLE('',(#295991)); +#295991 = FILL_AREA_STYLE_COLOUR('',#295697); +#295992 = STYLED_ITEM('color',(#295993),#14717); +#295993 = PRESENTATION_STYLE_ASSIGNMENT((#295994)); +#295994 = SURFACE_STYLE_USAGE(.BOTH.,#295995); +#295995 = SURFACE_SIDE_STYLE('',(#295996)); +#295996 = SURFACE_STYLE_FILL_AREA(#295997); +#295997 = FILL_AREA_STYLE('',(#295998)); +#295998 = FILL_AREA_STYLE_COLOUR('',#295697); +#295999 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #296000,#296007,#296014,#296021,#296028,#296035,#296042,#296049, + #296056,#296063,#296070,#296078,#296085,#296092,#296099,#296106, + #296113,#296120,#296127,#296134,#296141,#296148,#296155,#296162, + #296169,#296176,#296183,#296190),#43578); +#296000 = STYLED_ITEM('color',(#296001),#42726); +#296001 = PRESENTATION_STYLE_ASSIGNMENT((#296002)); +#296002 = SURFACE_STYLE_USAGE(.BOTH.,#296003); +#296003 = SURFACE_SIDE_STYLE('',(#296004)); +#296004 = SURFACE_STYLE_FILL_AREA(#296005); +#296005 = FILL_AREA_STYLE('',(#296006)); +#296006 = FILL_AREA_STYLE_COLOUR('',#270441); +#296007 = STYLED_ITEM('color',(#296008),#42802); +#296008 = PRESENTATION_STYLE_ASSIGNMENT((#296009)); +#296009 = SURFACE_STYLE_USAGE(.BOTH.,#296010); +#296010 = SURFACE_SIDE_STYLE('',(#296011)); +#296011 = SURFACE_STYLE_FILL_AREA(#296012); +#296012 = FILL_AREA_STYLE('',(#296013)); +#296013 = FILL_AREA_STYLE_COLOUR('',#270441); +#296014 = STYLED_ITEM('color',(#296015),#42833); +#296015 = PRESENTATION_STYLE_ASSIGNMENT((#296016)); +#296016 = SURFACE_STYLE_USAGE(.BOTH.,#296017); +#296017 = SURFACE_SIDE_STYLE('',(#296018)); +#296018 = SURFACE_STYLE_FILL_AREA(#296019); +#296019 = FILL_AREA_STYLE('',(#296020)); +#296020 = FILL_AREA_STYLE_COLOUR('',#270441); +#296021 = STYLED_ITEM('color',(#296022),#42858); +#296022 = PRESENTATION_STYLE_ASSIGNMENT((#296023)); +#296023 = SURFACE_STYLE_USAGE(.BOTH.,#296024); +#296024 = SURFACE_SIDE_STYLE('',(#296025)); +#296025 = SURFACE_STYLE_FILL_AREA(#296026); +#296026 = FILL_AREA_STYLE('',(#296027)); +#296027 = FILL_AREA_STYLE_COLOUR('',#270441); +#296028 = STYLED_ITEM('color',(#296029),#42883); +#296029 = PRESENTATION_STYLE_ASSIGNMENT((#296030)); +#296030 = SURFACE_STYLE_USAGE(.BOTH.,#296031); +#296031 = SURFACE_SIDE_STYLE('',(#296032)); +#296032 = SURFACE_STYLE_FILL_AREA(#296033); +#296033 = FILL_AREA_STYLE('',(#296034)); +#296034 = FILL_AREA_STYLE_COLOUR('',#270441); +#296035 = STYLED_ITEM('color',(#296036),#42907); +#296036 = PRESENTATION_STYLE_ASSIGNMENT((#296037)); +#296037 = SURFACE_STYLE_USAGE(.BOTH.,#296038); +#296038 = SURFACE_SIDE_STYLE('',(#296039)); +#296039 = SURFACE_STYLE_FILL_AREA(#296040); +#296040 = FILL_AREA_STYLE('',(#296041)); +#296041 = FILL_AREA_STYLE_COLOUR('',#270441); +#296042 = STYLED_ITEM('color',(#296043),#42931); +#296043 = PRESENTATION_STYLE_ASSIGNMENT((#296044)); +#296044 = SURFACE_STYLE_USAGE(.BOTH.,#296045); +#296045 = SURFACE_SIDE_STYLE('',(#296046)); +#296046 = SURFACE_STYLE_FILL_AREA(#296047); +#296047 = FILL_AREA_STYLE('',(#296048)); +#296048 = FILL_AREA_STYLE_COLOUR('',#270441); +#296049 = STYLED_ITEM('color',(#296050),#42956); +#296050 = PRESENTATION_STYLE_ASSIGNMENT((#296051)); +#296051 = SURFACE_STYLE_USAGE(.BOTH.,#296052); +#296052 = SURFACE_SIDE_STYLE('',(#296053)); +#296053 = SURFACE_STYLE_FILL_AREA(#296054); +#296054 = FILL_AREA_STYLE('',(#296055)); +#296055 = FILL_AREA_STYLE_COLOUR('',#270441); +#296056 = STYLED_ITEM('color',(#296057),#42981); +#296057 = PRESENTATION_STYLE_ASSIGNMENT((#296058)); +#296058 = SURFACE_STYLE_USAGE(.BOTH.,#296059); +#296059 = SURFACE_SIDE_STYLE('',(#296060)); +#296060 = SURFACE_STYLE_FILL_AREA(#296061); +#296061 = FILL_AREA_STYLE('',(#296062)); +#296062 = FILL_AREA_STYLE_COLOUR('',#270441); +#296063 = STYLED_ITEM('color',(#296064),#42998); +#296064 = PRESENTATION_STYLE_ASSIGNMENT((#296065)); +#296065 = SURFACE_STYLE_USAGE(.BOTH.,#296066); +#296066 = SURFACE_SIDE_STYLE('',(#296067)); +#296067 = SURFACE_STYLE_FILL_AREA(#296068); +#296068 = FILL_AREA_STYLE('',(#296069)); +#296069 = FILL_AREA_STYLE_COLOUR('',#270441); +#296070 = STYLED_ITEM('color',(#296071),#43084); +#296071 = PRESENTATION_STYLE_ASSIGNMENT((#296072)); +#296072 = SURFACE_STYLE_USAGE(.BOTH.,#296073); +#296073 = SURFACE_SIDE_STYLE('',(#296074)); +#296074 = SURFACE_STYLE_FILL_AREA(#296075); +#296075 = FILL_AREA_STYLE('',(#296076)); +#296076 = FILL_AREA_STYLE_COLOUR('',#296077); +#296077 = COLOUR_RGB('',0.379000005575,0.270000008848,0.214999999939); +#296078 = STYLED_ITEM('color',(#296079),#43116); +#296079 = PRESENTATION_STYLE_ASSIGNMENT((#296080)); +#296080 = SURFACE_STYLE_USAGE(.BOTH.,#296081); +#296081 = SURFACE_SIDE_STYLE('',(#296082)); +#296082 = SURFACE_STYLE_FILL_AREA(#296083); +#296083 = FILL_AREA_STYLE('',(#296084)); +#296084 = FILL_AREA_STYLE_COLOUR('',#296077); +#296085 = STYLED_ITEM('color',(#296086),#43140); +#296086 = PRESENTATION_STYLE_ASSIGNMENT((#296087)); +#296087 = SURFACE_STYLE_USAGE(.BOTH.,#296088); +#296088 = SURFACE_SIDE_STYLE('',(#296089)); +#296089 = SURFACE_STYLE_FILL_AREA(#296090); +#296090 = FILL_AREA_STYLE('',(#296091)); +#296091 = FILL_AREA_STYLE_COLOUR('',#296077); +#296092 = STYLED_ITEM('color',(#296093),#43165); +#296093 = PRESENTATION_STYLE_ASSIGNMENT((#296094)); +#296094 = SURFACE_STYLE_USAGE(.BOTH.,#296095); +#296095 = SURFACE_SIDE_STYLE('',(#296096)); +#296096 = SURFACE_STYLE_FILL_AREA(#296097); +#296097 = FILL_AREA_STYLE('',(#296098)); +#296098 = FILL_AREA_STYLE_COLOUR('',#296077); +#296099 = STYLED_ITEM('color',(#296100),#43189); +#296100 = PRESENTATION_STYLE_ASSIGNMENT((#296101)); +#296101 = SURFACE_STYLE_USAGE(.BOTH.,#296102); +#296102 = SURFACE_SIDE_STYLE('',(#296103)); +#296103 = SURFACE_STYLE_FILL_AREA(#296104); +#296104 = FILL_AREA_STYLE('',(#296105)); +#296105 = FILL_AREA_STYLE_COLOUR('',#296077); +#296106 = STYLED_ITEM('color',(#296107),#43214); +#296107 = PRESENTATION_STYLE_ASSIGNMENT((#296108)); +#296108 = SURFACE_STYLE_USAGE(.BOTH.,#296109); +#296109 = SURFACE_SIDE_STYLE('',(#296110)); +#296110 = SURFACE_STYLE_FILL_AREA(#296111); +#296111 = FILL_AREA_STYLE('',(#296112)); +#296112 = FILL_AREA_STYLE_COLOUR('',#296077); +#296113 = STYLED_ITEM('color',(#296114),#43238); +#296114 = PRESENTATION_STYLE_ASSIGNMENT((#296115)); +#296115 = SURFACE_STYLE_USAGE(.BOTH.,#296116); +#296116 = SURFACE_SIDE_STYLE('',(#296117)); +#296117 = SURFACE_STYLE_FILL_AREA(#296118); +#296118 = FILL_AREA_STYLE('',(#296119)); +#296119 = FILL_AREA_STYLE_COLOUR('',#296077); +#296120 = STYLED_ITEM('color',(#296121),#43263); +#296121 = PRESENTATION_STYLE_ASSIGNMENT((#296122)); +#296122 = SURFACE_STYLE_USAGE(.BOTH.,#296123); +#296123 = SURFACE_SIDE_STYLE('',(#296124)); +#296124 = SURFACE_STYLE_FILL_AREA(#296125); +#296125 = FILL_AREA_STYLE('',(#296126)); +#296126 = FILL_AREA_STYLE_COLOUR('',#296077); +#296127 = STYLED_ITEM('color',(#296128),#43280); +#296128 = PRESENTATION_STYLE_ASSIGNMENT((#296129)); +#296129 = SURFACE_STYLE_USAGE(.BOTH.,#296130); +#296130 = SURFACE_SIDE_STYLE('',(#296131)); +#296131 = SURFACE_STYLE_FILL_AREA(#296132); +#296132 = FILL_AREA_STYLE('',(#296133)); +#296133 = FILL_AREA_STYLE_COLOUR('',#270441); +#296134 = STYLED_ITEM('color',(#296135),#43366); +#296135 = PRESENTATION_STYLE_ASSIGNMENT((#296136)); +#296136 = SURFACE_STYLE_USAGE(.BOTH.,#296137); +#296137 = SURFACE_SIDE_STYLE('',(#296138)); +#296138 = SURFACE_STYLE_FILL_AREA(#296139); +#296139 = FILL_AREA_STYLE('',(#296140)); +#296140 = FILL_AREA_STYLE_COLOUR('',#270441); +#296141 = STYLED_ITEM('color',(#296142),#43397); +#296142 = PRESENTATION_STYLE_ASSIGNMENT((#296143)); +#296143 = SURFACE_STYLE_USAGE(.BOTH.,#296144); +#296144 = SURFACE_SIDE_STYLE('',(#296145)); +#296145 = SURFACE_STYLE_FILL_AREA(#296146); +#296146 = FILL_AREA_STYLE('',(#296147)); +#296147 = FILL_AREA_STYLE_COLOUR('',#270441); +#296148 = STYLED_ITEM('color',(#296149),#43422); +#296149 = PRESENTATION_STYLE_ASSIGNMENT((#296150)); +#296150 = SURFACE_STYLE_USAGE(.BOTH.,#296151); +#296151 = SURFACE_SIDE_STYLE('',(#296152)); +#296152 = SURFACE_STYLE_FILL_AREA(#296153); +#296153 = FILL_AREA_STYLE('',(#296154)); +#296154 = FILL_AREA_STYLE_COLOUR('',#270441); +#296155 = STYLED_ITEM('color',(#296156),#43447); +#296156 = PRESENTATION_STYLE_ASSIGNMENT((#296157)); +#296157 = SURFACE_STYLE_USAGE(.BOTH.,#296158); +#296158 = SURFACE_SIDE_STYLE('',(#296159)); +#296159 = SURFACE_STYLE_FILL_AREA(#296160); +#296160 = FILL_AREA_STYLE('',(#296161)); +#296161 = FILL_AREA_STYLE_COLOUR('',#270441); +#296162 = STYLED_ITEM('color',(#296163),#43471); +#296163 = PRESENTATION_STYLE_ASSIGNMENT((#296164)); +#296164 = SURFACE_STYLE_USAGE(.BOTH.,#296165); +#296165 = SURFACE_SIDE_STYLE('',(#296166)); +#296166 = SURFACE_STYLE_FILL_AREA(#296167); +#296167 = FILL_AREA_STYLE('',(#296168)); +#296168 = FILL_AREA_STYLE_COLOUR('',#270441); +#296169 = STYLED_ITEM('color',(#296170),#43495); +#296170 = PRESENTATION_STYLE_ASSIGNMENT((#296171)); +#296171 = SURFACE_STYLE_USAGE(.BOTH.,#296172); +#296172 = SURFACE_SIDE_STYLE('',(#296173)); +#296173 = SURFACE_STYLE_FILL_AREA(#296174); +#296174 = FILL_AREA_STYLE('',(#296175)); +#296175 = FILL_AREA_STYLE_COLOUR('',#270441); +#296176 = STYLED_ITEM('color',(#296177),#43520); +#296177 = PRESENTATION_STYLE_ASSIGNMENT((#296178)); +#296178 = SURFACE_STYLE_USAGE(.BOTH.,#296179); +#296179 = SURFACE_SIDE_STYLE('',(#296180)); +#296180 = SURFACE_STYLE_FILL_AREA(#296181); +#296181 = FILL_AREA_STYLE('',(#296182)); +#296182 = FILL_AREA_STYLE_COLOUR('',#270441); +#296183 = STYLED_ITEM('color',(#296184),#43545); +#296184 = PRESENTATION_STYLE_ASSIGNMENT((#296185)); +#296185 = SURFACE_STYLE_USAGE(.BOTH.,#296186); +#296186 = SURFACE_SIDE_STYLE('',(#296187)); +#296187 = SURFACE_STYLE_FILL_AREA(#296188); +#296188 = FILL_AREA_STYLE('',(#296189)); +#296189 = FILL_AREA_STYLE_COLOUR('',#270441); +#296190 = STYLED_ITEM('color',(#296191),#43562); +#296191 = PRESENTATION_STYLE_ASSIGNMENT((#296192)); +#296192 = SURFACE_STYLE_USAGE(.BOTH.,#296193); +#296193 = SURFACE_SIDE_STYLE('',(#296194)); +#296194 = SURFACE_STYLE_FILL_AREA(#296195); +#296195 = FILL_AREA_STYLE('',(#296196)); +#296196 = FILL_AREA_STYLE_COLOUR('',#270441); +#296197 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #296198,#296207,#296216,#296225,#296234,#296243,#296252,#296261, + #296270,#296279,#296288,#296297,#296306,#296315,#296324,#296333, + #296342,#296351,#296360,#296369,#296378,#296387,#296396,#296405, + #296414,#296423,#296432,#296441,#296450,#296459,#296468,#296477, + #296486,#296495,#296504,#296513,#296522,#296531,#296540,#296549, + #296558,#296567,#296576,#296585,#296594,#296603,#296612,#296621, + #296630,#296639,#296648,#296657,#296666,#296675,#296684,#296693, + #296702,#296711,#296720,#296729,#296738,#296747,#296756,#296765, + #296774,#296783,#296792,#296801,#296810,#296819,#296828,#296837, + #296846,#296855,#296864,#296873,#296882,#296891,#296900,#296909, + #296918,#296927,#296936,#296945,#296954,#296963,#296972,#296981, + #296990,#296999,#297008,#297017,#297026,#297035,#297044,#297053, + #297062,#297071,#297080,#297089,#297098,#297107,#297116,#297125, + #297134,#297143,#297152,#297161,#297170,#297179,#297188,#297197, + #297206,#297215,#297224,#297233,#297242,#297251,#297260,#297269, + #297278,#297287,#297296,#297305,#297314,#297323,#297332,#297341, + #297350,#297359,#297368,#297377,#297386,#297395,#297404,#297413, + #297422,#297431,#297440,#297449,#297458,#297467,#297476,#297485, + #297494,#297503,#297512,#297521,#297530,#297539,#297548,#297557, + #297566,#297575,#297584,#297593,#297602,#297611,#297620,#297629, + #297638,#297647,#297656,#297665,#297674,#297683,#297692,#297701, + #297710,#297719,#297728,#297737,#297746,#297755,#297764,#297773, + #297782,#297791,#297800,#297809,#297818,#297827,#297836,#297845, + #297854,#297863,#297872,#297881,#297890,#297899,#297908,#297917, + #297926,#297935,#297944,#297953,#297962,#297971,#297980,#297989, + #297998,#298007,#298016,#298025,#298034,#298043,#298052,#298061, + #298070,#298079,#298088,#298097,#298106,#298115),#114947); +#296198 = STYLED_ITEM('color',(#296199),#110011); +#296199 = PRESENTATION_STYLE_ASSIGNMENT((#296200,#296205)); +#296200 = SURFACE_STYLE_USAGE(.BOTH.,#296201); +#296201 = SURFACE_SIDE_STYLE('',(#296202)); +#296202 = SURFACE_STYLE_FILL_AREA(#296203); +#296203 = FILL_AREA_STYLE('',(#296204)); +#296204 = FILL_AREA_STYLE_COLOUR('',#270350); +#296205 = CURVE_STYLE('',#296206,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296206 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296207 = STYLED_ITEM('color',(#296208),#110051); +#296208 = PRESENTATION_STYLE_ASSIGNMENT((#296209,#296214)); +#296209 = SURFACE_STYLE_USAGE(.BOTH.,#296210); +#296210 = SURFACE_SIDE_STYLE('',(#296211)); +#296211 = SURFACE_STYLE_FILL_AREA(#296212); +#296212 = FILL_AREA_STYLE('',(#296213)); +#296213 = FILL_AREA_STYLE_COLOUR('',#270350); +#296214 = CURVE_STYLE('',#296215,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296215 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296216 = STYLED_ITEM('color',(#296217),#110114); +#296217 = PRESENTATION_STYLE_ASSIGNMENT((#296218,#296223)); +#296218 = SURFACE_STYLE_USAGE(.BOTH.,#296219); +#296219 = SURFACE_SIDE_STYLE('',(#296220)); +#296220 = SURFACE_STYLE_FILL_AREA(#296221); +#296221 = FILL_AREA_STYLE('',(#296222)); +#296222 = FILL_AREA_STYLE_COLOUR('',#270350); +#296223 = CURVE_STYLE('',#296224,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296224 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296225 = STYLED_ITEM('color',(#296226),#110177); +#296226 = PRESENTATION_STYLE_ASSIGNMENT((#296227,#296232)); +#296227 = SURFACE_STYLE_USAGE(.BOTH.,#296228); +#296228 = SURFACE_SIDE_STYLE('',(#296229)); +#296229 = SURFACE_STYLE_FILL_AREA(#296230); +#296230 = FILL_AREA_STYLE('',(#296231)); +#296231 = FILL_AREA_STYLE_COLOUR('',#270350); +#296232 = CURVE_STYLE('',#296233,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296233 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296234 = STYLED_ITEM('color',(#296235),#110194); +#296235 = PRESENTATION_STYLE_ASSIGNMENT((#296236,#296241)); +#296236 = SURFACE_STYLE_USAGE(.BOTH.,#296237); +#296237 = SURFACE_SIDE_STYLE('',(#296238)); +#296238 = SURFACE_STYLE_FILL_AREA(#296239); +#296239 = FILL_AREA_STYLE('',(#296240)); +#296240 = FILL_AREA_STYLE_COLOUR('',#270350); +#296241 = CURVE_STYLE('',#296242,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296242 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296243 = STYLED_ITEM('color',(#296244),#110415); +#296244 = PRESENTATION_STYLE_ASSIGNMENT((#296245,#296250)); +#296245 = SURFACE_STYLE_USAGE(.BOTH.,#296246); +#296246 = SURFACE_SIDE_STYLE('',(#296247)); +#296247 = SURFACE_STYLE_FILL_AREA(#296248); +#296248 = FILL_AREA_STYLE('',(#296249)); +#296249 = FILL_AREA_STYLE_COLOUR('',#270350); +#296250 = CURVE_STYLE('',#296251,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296251 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296252 = STYLED_ITEM('color',(#296253),#110437); +#296253 = PRESENTATION_STYLE_ASSIGNMENT((#296254,#296259)); +#296254 = SURFACE_STYLE_USAGE(.BOTH.,#296255); +#296255 = SURFACE_SIDE_STYLE('',(#296256)); +#296256 = SURFACE_STYLE_FILL_AREA(#296257); +#296257 = FILL_AREA_STYLE('',(#296258)); +#296258 = FILL_AREA_STYLE_COLOUR('',#270350); +#296259 = CURVE_STYLE('',#296260,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296260 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296261 = STYLED_ITEM('color',(#296262),#110454); +#296262 = PRESENTATION_STYLE_ASSIGNMENT((#296263,#296268)); +#296263 = SURFACE_STYLE_USAGE(.BOTH.,#296264); +#296264 = SURFACE_SIDE_STYLE('',(#296265)); +#296265 = SURFACE_STYLE_FILL_AREA(#296266); +#296266 = FILL_AREA_STYLE('',(#296267)); +#296267 = FILL_AREA_STYLE_COLOUR('',#270350); +#296268 = CURVE_STYLE('',#296269,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296269 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296270 = OVER_RIDING_STYLED_ITEM('overriding color',(#296271),#110487, + #296261); +#296271 = PRESENTATION_STYLE_ASSIGNMENT((#296272,#296277)); +#296272 = SURFACE_STYLE_USAGE(.BOTH.,#296273); +#296273 = SURFACE_SIDE_STYLE('',(#296274)); +#296274 = SURFACE_STYLE_FILL_AREA(#296275); +#296275 = FILL_AREA_STYLE('',(#296276)); +#296276 = FILL_AREA_STYLE_COLOUR('',#285989); +#296277 = CURVE_STYLE('',#296278,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296278 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296279 = OVER_RIDING_STYLED_ITEM('overriding color',(#296280),#110519, + #296261); +#296280 = PRESENTATION_STYLE_ASSIGNMENT((#296281,#296286)); +#296281 = SURFACE_STYLE_USAGE(.BOTH.,#296282); +#296282 = SURFACE_SIDE_STYLE('',(#296283)); +#296283 = SURFACE_STYLE_FILL_AREA(#296284); +#296284 = FILL_AREA_STYLE('',(#296285)); +#296285 = FILL_AREA_STYLE_COLOUR('',#285989); +#296286 = CURVE_STYLE('',#296287,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296287 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296288 = OVER_RIDING_STYLED_ITEM('overriding color',(#296289),#110553, + #296261); +#296289 = PRESENTATION_STYLE_ASSIGNMENT((#296290,#296295)); +#296290 = SURFACE_STYLE_USAGE(.BOTH.,#296291); +#296291 = SURFACE_SIDE_STYLE('',(#296292)); +#296292 = SURFACE_STYLE_FILL_AREA(#296293); +#296293 = FILL_AREA_STYLE('',(#296294)); +#296294 = FILL_AREA_STYLE_COLOUR('',#285989); +#296295 = CURVE_STYLE('',#296296,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296296 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296297 = OVER_RIDING_STYLED_ITEM('overriding color',(#296298),#110585, + #296261); +#296298 = PRESENTATION_STYLE_ASSIGNMENT((#296299,#296304)); +#296299 = SURFACE_STYLE_USAGE(.BOTH.,#296300); +#296300 = SURFACE_SIDE_STYLE('',(#296301)); +#296301 = SURFACE_STYLE_FILL_AREA(#296302); +#296302 = FILL_AREA_STYLE('',(#296303)); +#296303 = FILL_AREA_STYLE_COLOUR('',#285989); +#296304 = CURVE_STYLE('',#296305,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296305 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296306 = OVER_RIDING_STYLED_ITEM('overriding color',(#296307),#110619, + #296261); +#296307 = PRESENTATION_STYLE_ASSIGNMENT((#296308,#296313)); +#296308 = SURFACE_STYLE_USAGE(.BOTH.,#296309); +#296309 = SURFACE_SIDE_STYLE('',(#296310)); +#296310 = SURFACE_STYLE_FILL_AREA(#296311); +#296311 = FILL_AREA_STYLE('',(#296312)); +#296312 = FILL_AREA_STYLE_COLOUR('',#285989); +#296313 = CURVE_STYLE('',#296314,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296314 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296315 = OVER_RIDING_STYLED_ITEM('overriding color',(#296316),#110651, + #296261); +#296316 = PRESENTATION_STYLE_ASSIGNMENT((#296317,#296322)); +#296317 = SURFACE_STYLE_USAGE(.BOTH.,#296318); +#296318 = SURFACE_SIDE_STYLE('',(#296319)); +#296319 = SURFACE_STYLE_FILL_AREA(#296320); +#296320 = FILL_AREA_STYLE('',(#296321)); +#296321 = FILL_AREA_STYLE_COLOUR('',#285989); +#296322 = CURVE_STYLE('',#296323,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296323 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296324 = OVER_RIDING_STYLED_ITEM('overriding color',(#296325),#110685, + #296261); +#296325 = PRESENTATION_STYLE_ASSIGNMENT((#296326,#296331)); +#296326 = SURFACE_STYLE_USAGE(.BOTH.,#296327); +#296327 = SURFACE_SIDE_STYLE('',(#296328)); +#296328 = SURFACE_STYLE_FILL_AREA(#296329); +#296329 = FILL_AREA_STYLE('',(#296330)); +#296330 = FILL_AREA_STYLE_COLOUR('',#285989); +#296331 = CURVE_STYLE('',#296332,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296332 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296333 = OVER_RIDING_STYLED_ITEM('overriding color',(#296334),#110717, + #296261); +#296334 = PRESENTATION_STYLE_ASSIGNMENT((#296335,#296340)); +#296335 = SURFACE_STYLE_USAGE(.BOTH.,#296336); +#296336 = SURFACE_SIDE_STYLE('',(#296337)); +#296337 = SURFACE_STYLE_FILL_AREA(#296338); +#296338 = FILL_AREA_STYLE('',(#296339)); +#296339 = FILL_AREA_STYLE_COLOUR('',#285989); +#296340 = CURVE_STYLE('',#296341,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296341 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296342 = OVER_RIDING_STYLED_ITEM('overriding color',(#296343),#110751, + #296261); +#296343 = PRESENTATION_STYLE_ASSIGNMENT((#296344,#296349)); +#296344 = SURFACE_STYLE_USAGE(.BOTH.,#296345); +#296345 = SURFACE_SIDE_STYLE('',(#296346)); +#296346 = SURFACE_STYLE_FILL_AREA(#296347); +#296347 = FILL_AREA_STYLE('',(#296348)); +#296348 = FILL_AREA_STYLE_COLOUR('',#285989); +#296349 = CURVE_STYLE('',#296350,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296350 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296351 = OVER_RIDING_STYLED_ITEM('overriding color',(#296352),#110783, + #296261); +#296352 = PRESENTATION_STYLE_ASSIGNMENT((#296353,#296358)); +#296353 = SURFACE_STYLE_USAGE(.BOTH.,#296354); +#296354 = SURFACE_SIDE_STYLE('',(#296355)); +#296355 = SURFACE_STYLE_FILL_AREA(#296356); +#296356 = FILL_AREA_STYLE('',(#296357)); +#296357 = FILL_AREA_STYLE_COLOUR('',#285989); +#296358 = CURVE_STYLE('',#296359,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296359 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296360 = OVER_RIDING_STYLED_ITEM('overriding color',(#296361),#110817, + #296261); +#296361 = PRESENTATION_STYLE_ASSIGNMENT((#296362,#296367)); +#296362 = SURFACE_STYLE_USAGE(.BOTH.,#296363); +#296363 = SURFACE_SIDE_STYLE('',(#296364)); +#296364 = SURFACE_STYLE_FILL_AREA(#296365); +#296365 = FILL_AREA_STYLE('',(#296366)); +#296366 = FILL_AREA_STYLE_COLOUR('',#285989); +#296367 = CURVE_STYLE('',#296368,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296368 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296369 = OVER_RIDING_STYLED_ITEM('overriding color',(#296370),#110849, + #296261); +#296370 = PRESENTATION_STYLE_ASSIGNMENT((#296371,#296376)); +#296371 = SURFACE_STYLE_USAGE(.BOTH.,#296372); +#296372 = SURFACE_SIDE_STYLE('',(#296373)); +#296373 = SURFACE_STYLE_FILL_AREA(#296374); +#296374 = FILL_AREA_STYLE('',(#296375)); +#296375 = FILL_AREA_STYLE_COLOUR('',#285989); +#296376 = CURVE_STYLE('',#296377,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296377 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296378 = STYLED_ITEM('color',(#296379),#110867); +#296379 = PRESENTATION_STYLE_ASSIGNMENT((#296380,#296385)); +#296380 = SURFACE_STYLE_USAGE(.BOTH.,#296381); +#296381 = SURFACE_SIDE_STYLE('',(#296382)); +#296382 = SURFACE_STYLE_FILL_AREA(#296383); +#296383 = FILL_AREA_STYLE('',(#296384)); +#296384 = FILL_AREA_STYLE_COLOUR('',#270350); +#296385 = CURVE_STYLE('',#296386,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296386 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296387 = STYLED_ITEM('color',(#296388),#110879); +#296388 = PRESENTATION_STYLE_ASSIGNMENT((#296389,#296394)); +#296389 = SURFACE_STYLE_USAGE(.BOTH.,#296390); +#296390 = SURFACE_SIDE_STYLE('',(#296391)); +#296391 = SURFACE_STYLE_FILL_AREA(#296392); +#296392 = FILL_AREA_STYLE('',(#296393)); +#296393 = FILL_AREA_STYLE_COLOUR('',#270350); +#296394 = CURVE_STYLE('',#296395,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296395 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296396 = STYLED_ITEM('color',(#296397),#110891); +#296397 = PRESENTATION_STYLE_ASSIGNMENT((#296398,#296403)); +#296398 = SURFACE_STYLE_USAGE(.BOTH.,#296399); +#296399 = SURFACE_SIDE_STYLE('',(#296400)); +#296400 = SURFACE_STYLE_FILL_AREA(#296401); +#296401 = FILL_AREA_STYLE('',(#296402)); +#296402 = FILL_AREA_STYLE_COLOUR('',#270350); +#296403 = CURVE_STYLE('',#296404,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296404 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296405 = STYLED_ITEM('color',(#296406),#110922); +#296406 = PRESENTATION_STYLE_ASSIGNMENT((#296407,#296412)); +#296407 = SURFACE_STYLE_USAGE(.BOTH.,#296408); +#296408 = SURFACE_SIDE_STYLE('',(#296409)); +#296409 = SURFACE_STYLE_FILL_AREA(#296410); +#296410 = FILL_AREA_STYLE('',(#296411)); +#296411 = FILL_AREA_STYLE_COLOUR('',#270350); +#296412 = CURVE_STYLE('',#296413,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296413 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296414 = STYLED_ITEM('color',(#296415),#110946); +#296415 = PRESENTATION_STYLE_ASSIGNMENT((#296416,#296421)); +#296416 = SURFACE_STYLE_USAGE(.BOTH.,#296417); +#296417 = SURFACE_SIDE_STYLE('',(#296418)); +#296418 = SURFACE_STYLE_FILL_AREA(#296419); +#296419 = FILL_AREA_STYLE('',(#296420)); +#296420 = FILL_AREA_STYLE_COLOUR('',#270350); +#296421 = CURVE_STYLE('',#296422,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296422 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296423 = STYLED_ITEM('color',(#296424),#110970); +#296424 = PRESENTATION_STYLE_ASSIGNMENT((#296425,#296430)); +#296425 = SURFACE_STYLE_USAGE(.BOTH.,#296426); +#296426 = SURFACE_SIDE_STYLE('',(#296427)); +#296427 = SURFACE_STYLE_FILL_AREA(#296428); +#296428 = FILL_AREA_STYLE('',(#296429)); +#296429 = FILL_AREA_STYLE_COLOUR('',#270350); +#296430 = CURVE_STYLE('',#296431,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296431 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296432 = STYLED_ITEM('color',(#296433),#110987); +#296433 = PRESENTATION_STYLE_ASSIGNMENT((#296434,#296439)); +#296434 = SURFACE_STYLE_USAGE(.BOTH.,#296435); +#296435 = SURFACE_SIDE_STYLE('',(#296436)); +#296436 = SURFACE_STYLE_FILL_AREA(#296437); +#296437 = FILL_AREA_STYLE('',(#296438)); +#296438 = FILL_AREA_STYLE_COLOUR('',#270350); +#296439 = CURVE_STYLE('',#296440,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296440 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296441 = STYLED_ITEM('color',(#296442),#111018); +#296442 = PRESENTATION_STYLE_ASSIGNMENT((#296443,#296448)); +#296443 = SURFACE_STYLE_USAGE(.BOTH.,#296444); +#296444 = SURFACE_SIDE_STYLE('',(#296445)); +#296445 = SURFACE_STYLE_FILL_AREA(#296446); +#296446 = FILL_AREA_STYLE('',(#296447)); +#296447 = FILL_AREA_STYLE_COLOUR('',#270350); +#296448 = CURVE_STYLE('',#296449,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296450 = STYLED_ITEM('color',(#296451),#111042); +#296451 = PRESENTATION_STYLE_ASSIGNMENT((#296452,#296457)); +#296452 = SURFACE_STYLE_USAGE(.BOTH.,#296453); +#296453 = SURFACE_SIDE_STYLE('',(#296454)); +#296454 = SURFACE_STYLE_FILL_AREA(#296455); +#296455 = FILL_AREA_STYLE('',(#296456)); +#296456 = FILL_AREA_STYLE_COLOUR('',#270350); +#296457 = CURVE_STYLE('',#296458,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296458 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296459 = STYLED_ITEM('color',(#296460),#111066); +#296460 = PRESENTATION_STYLE_ASSIGNMENT((#296461,#296466)); +#296461 = SURFACE_STYLE_USAGE(.BOTH.,#296462); +#296462 = SURFACE_SIDE_STYLE('',(#296463)); +#296463 = SURFACE_STYLE_FILL_AREA(#296464); +#296464 = FILL_AREA_STYLE('',(#296465)); +#296465 = FILL_AREA_STYLE_COLOUR('',#270350); +#296466 = CURVE_STYLE('',#296467,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296467 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296468 = STYLED_ITEM('color',(#296469),#111083); +#296469 = PRESENTATION_STYLE_ASSIGNMENT((#296470,#296475)); +#296470 = SURFACE_STYLE_USAGE(.BOTH.,#296471); +#296471 = SURFACE_SIDE_STYLE('',(#296472)); +#296472 = SURFACE_STYLE_FILL_AREA(#296473); +#296473 = FILL_AREA_STYLE('',(#296474)); +#296474 = FILL_AREA_STYLE_COLOUR('',#270350); +#296475 = CURVE_STYLE('',#296476,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296476 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296477 = STYLED_ITEM('color',(#296478),#111114); +#296478 = PRESENTATION_STYLE_ASSIGNMENT((#296479,#296484)); +#296479 = SURFACE_STYLE_USAGE(.BOTH.,#296480); +#296480 = SURFACE_SIDE_STYLE('',(#296481)); +#296481 = SURFACE_STYLE_FILL_AREA(#296482); +#296482 = FILL_AREA_STYLE('',(#296483)); +#296483 = FILL_AREA_STYLE_COLOUR('',#270350); +#296484 = CURVE_STYLE('',#296485,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296485 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296486 = STYLED_ITEM('color',(#296487),#111138); +#296487 = PRESENTATION_STYLE_ASSIGNMENT((#296488,#296493)); +#296488 = SURFACE_STYLE_USAGE(.BOTH.,#296489); +#296489 = SURFACE_SIDE_STYLE('',(#296490)); +#296490 = SURFACE_STYLE_FILL_AREA(#296491); +#296491 = FILL_AREA_STYLE('',(#296492)); +#296492 = FILL_AREA_STYLE_COLOUR('',#270350); +#296493 = CURVE_STYLE('',#296494,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296494 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296495 = STYLED_ITEM('color',(#296496),#111162); +#296496 = PRESENTATION_STYLE_ASSIGNMENT((#296497,#296502)); +#296497 = SURFACE_STYLE_USAGE(.BOTH.,#296498); +#296498 = SURFACE_SIDE_STYLE('',(#296499)); +#296499 = SURFACE_STYLE_FILL_AREA(#296500); +#296500 = FILL_AREA_STYLE('',(#296501)); +#296501 = FILL_AREA_STYLE_COLOUR('',#270350); +#296502 = CURVE_STYLE('',#296503,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296504 = STYLED_ITEM('color',(#296505),#111179); +#296505 = PRESENTATION_STYLE_ASSIGNMENT((#296506,#296511)); +#296506 = SURFACE_STYLE_USAGE(.BOTH.,#296507); +#296507 = SURFACE_SIDE_STYLE('',(#296508)); +#296508 = SURFACE_STYLE_FILL_AREA(#296509); +#296509 = FILL_AREA_STYLE('',(#296510)); +#296510 = FILL_AREA_STYLE_COLOUR('',#270350); +#296511 = CURVE_STYLE('',#296512,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296513 = STYLED_ITEM('color',(#296514),#111210); +#296514 = PRESENTATION_STYLE_ASSIGNMENT((#296515,#296520)); +#296515 = SURFACE_STYLE_USAGE(.BOTH.,#296516); +#296516 = SURFACE_SIDE_STYLE('',(#296517)); +#296517 = SURFACE_STYLE_FILL_AREA(#296518); +#296518 = FILL_AREA_STYLE('',(#296519)); +#296519 = FILL_AREA_STYLE_COLOUR('',#270350); +#296520 = CURVE_STYLE('',#296521,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296522 = STYLED_ITEM('color',(#296523),#111234); +#296523 = PRESENTATION_STYLE_ASSIGNMENT((#296524,#296529)); +#296524 = SURFACE_STYLE_USAGE(.BOTH.,#296525); +#296525 = SURFACE_SIDE_STYLE('',(#296526)); +#296526 = SURFACE_STYLE_FILL_AREA(#296527); +#296527 = FILL_AREA_STYLE('',(#296528)); +#296528 = FILL_AREA_STYLE_COLOUR('',#270350); +#296529 = CURVE_STYLE('',#296530,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296531 = STYLED_ITEM('color',(#296532),#111258); +#296532 = PRESENTATION_STYLE_ASSIGNMENT((#296533,#296538)); +#296533 = SURFACE_STYLE_USAGE(.BOTH.,#296534); +#296534 = SURFACE_SIDE_STYLE('',(#296535)); +#296535 = SURFACE_STYLE_FILL_AREA(#296536); +#296536 = FILL_AREA_STYLE('',(#296537)); +#296537 = FILL_AREA_STYLE_COLOUR('',#270350); +#296538 = CURVE_STYLE('',#296539,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296539 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296540 = STYLED_ITEM('color',(#296541),#111275); +#296541 = PRESENTATION_STYLE_ASSIGNMENT((#296542,#296547)); +#296542 = SURFACE_STYLE_USAGE(.BOTH.,#296543); +#296543 = SURFACE_SIDE_STYLE('',(#296544)); +#296544 = SURFACE_STYLE_FILL_AREA(#296545); +#296545 = FILL_AREA_STYLE('',(#296546)); +#296546 = FILL_AREA_STYLE_COLOUR('',#270350); +#296547 = CURVE_STYLE('',#296548,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296548 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296549 = STYLED_ITEM('color',(#296550),#111306); +#296550 = PRESENTATION_STYLE_ASSIGNMENT((#296551,#296556)); +#296551 = SURFACE_STYLE_USAGE(.BOTH.,#296552); +#296552 = SURFACE_SIDE_STYLE('',(#296553)); +#296553 = SURFACE_STYLE_FILL_AREA(#296554); +#296554 = FILL_AREA_STYLE('',(#296555)); +#296555 = FILL_AREA_STYLE_COLOUR('',#270350); +#296556 = CURVE_STYLE('',#296557,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296557 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296558 = STYLED_ITEM('color',(#296559),#111330); +#296559 = PRESENTATION_STYLE_ASSIGNMENT((#296560,#296565)); +#296560 = SURFACE_STYLE_USAGE(.BOTH.,#296561); +#296561 = SURFACE_SIDE_STYLE('',(#296562)); +#296562 = SURFACE_STYLE_FILL_AREA(#296563); +#296563 = FILL_AREA_STYLE('',(#296564)); +#296564 = FILL_AREA_STYLE_COLOUR('',#270350); +#296565 = CURVE_STYLE('',#296566,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296566 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296567 = STYLED_ITEM('color',(#296568),#111354); +#296568 = PRESENTATION_STYLE_ASSIGNMENT((#296569,#296574)); +#296569 = SURFACE_STYLE_USAGE(.BOTH.,#296570); +#296570 = SURFACE_SIDE_STYLE('',(#296571)); +#296571 = SURFACE_STYLE_FILL_AREA(#296572); +#296572 = FILL_AREA_STYLE('',(#296573)); +#296573 = FILL_AREA_STYLE_COLOUR('',#270350); +#296574 = CURVE_STYLE('',#296575,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296575 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296576 = STYLED_ITEM('color',(#296577),#111371); +#296577 = PRESENTATION_STYLE_ASSIGNMENT((#296578,#296583)); +#296578 = SURFACE_STYLE_USAGE(.BOTH.,#296579); +#296579 = SURFACE_SIDE_STYLE('',(#296580)); +#296580 = SURFACE_STYLE_FILL_AREA(#296581); +#296581 = FILL_AREA_STYLE('',(#296582)); +#296582 = FILL_AREA_STYLE_COLOUR('',#270350); +#296583 = CURVE_STYLE('',#296584,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296584 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296585 = STYLED_ITEM('color',(#296586),#111402); +#296586 = PRESENTATION_STYLE_ASSIGNMENT((#296587,#296592)); +#296587 = SURFACE_STYLE_USAGE(.BOTH.,#296588); +#296588 = SURFACE_SIDE_STYLE('',(#296589)); +#296589 = SURFACE_STYLE_FILL_AREA(#296590); +#296590 = FILL_AREA_STYLE('',(#296591)); +#296591 = FILL_AREA_STYLE_COLOUR('',#270350); +#296592 = CURVE_STYLE('',#296593,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296593 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296594 = STYLED_ITEM('color',(#296595),#111426); +#296595 = PRESENTATION_STYLE_ASSIGNMENT((#296596,#296601)); +#296596 = SURFACE_STYLE_USAGE(.BOTH.,#296597); +#296597 = SURFACE_SIDE_STYLE('',(#296598)); +#296598 = SURFACE_STYLE_FILL_AREA(#296599); +#296599 = FILL_AREA_STYLE('',(#296600)); +#296600 = FILL_AREA_STYLE_COLOUR('',#270350); +#296601 = CURVE_STYLE('',#296602,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296602 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296603 = STYLED_ITEM('color',(#296604),#111450); +#296604 = PRESENTATION_STYLE_ASSIGNMENT((#296605,#296610)); +#296605 = SURFACE_STYLE_USAGE(.BOTH.,#296606); +#296606 = SURFACE_SIDE_STYLE('',(#296607)); +#296607 = SURFACE_STYLE_FILL_AREA(#296608); +#296608 = FILL_AREA_STYLE('',(#296609)); +#296609 = FILL_AREA_STYLE_COLOUR('',#270350); +#296610 = CURVE_STYLE('',#296611,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296611 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296612 = STYLED_ITEM('color',(#296613),#111467); +#296613 = PRESENTATION_STYLE_ASSIGNMENT((#296614,#296619)); +#296614 = SURFACE_STYLE_USAGE(.BOTH.,#296615); +#296615 = SURFACE_SIDE_STYLE('',(#296616)); +#296616 = SURFACE_STYLE_FILL_AREA(#296617); +#296617 = FILL_AREA_STYLE('',(#296618)); +#296618 = FILL_AREA_STYLE_COLOUR('',#285989); +#296619 = CURVE_STYLE('',#296620,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296620 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296621 = STYLED_ITEM('color',(#296622),#111484); +#296622 = PRESENTATION_STYLE_ASSIGNMENT((#296623,#296628)); +#296623 = SURFACE_STYLE_USAGE(.BOTH.,#296624); +#296624 = SURFACE_SIDE_STYLE('',(#296625)); +#296625 = SURFACE_STYLE_FILL_AREA(#296626); +#296626 = FILL_AREA_STYLE('',(#296627)); +#296627 = FILL_AREA_STYLE_COLOUR('',#285989); +#296628 = CURVE_STYLE('',#296629,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296629 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296630 = STYLED_ITEM('color',(#296631),#111531); +#296631 = PRESENTATION_STYLE_ASSIGNMENT((#296632,#296637)); +#296632 = SURFACE_STYLE_USAGE(.BOTH.,#296633); +#296633 = SURFACE_SIDE_STYLE('',(#296634)); +#296634 = SURFACE_STYLE_FILL_AREA(#296635); +#296635 = FILL_AREA_STYLE('',(#296636)); +#296636 = FILL_AREA_STYLE_COLOUR('',#285989); +#296637 = CURVE_STYLE('',#296638,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296638 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296639 = STYLED_ITEM('color',(#296640),#111548); +#296640 = PRESENTATION_STYLE_ASSIGNMENT((#296641,#296646)); +#296641 = SURFACE_STYLE_USAGE(.BOTH.,#296642); +#296642 = SURFACE_SIDE_STYLE('',(#296643)); +#296643 = SURFACE_STYLE_FILL_AREA(#296644); +#296644 = FILL_AREA_STYLE('',(#296645)); +#296645 = FILL_AREA_STYLE_COLOUR('',#285989); +#296646 = CURVE_STYLE('',#296647,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296648 = STYLED_ITEM('color',(#296649),#111595); +#296649 = PRESENTATION_STYLE_ASSIGNMENT((#296650,#296655)); +#296650 = SURFACE_STYLE_USAGE(.BOTH.,#296651); +#296651 = SURFACE_SIDE_STYLE('',(#296652)); +#296652 = SURFACE_STYLE_FILL_AREA(#296653); +#296653 = FILL_AREA_STYLE('',(#296654)); +#296654 = FILL_AREA_STYLE_COLOUR('',#285989); +#296655 = CURVE_STYLE('',#296656,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296656 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296657 = STYLED_ITEM('color',(#296658),#111612); +#296658 = PRESENTATION_STYLE_ASSIGNMENT((#296659,#296664)); +#296659 = SURFACE_STYLE_USAGE(.BOTH.,#296660); +#296660 = SURFACE_SIDE_STYLE('',(#296661)); +#296661 = SURFACE_STYLE_FILL_AREA(#296662); +#296662 = FILL_AREA_STYLE('',(#296663)); +#296663 = FILL_AREA_STYLE_COLOUR('',#285989); +#296664 = CURVE_STYLE('',#296665,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296665 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296666 = STYLED_ITEM('color',(#296667),#111659); +#296667 = PRESENTATION_STYLE_ASSIGNMENT((#296668,#296673)); +#296668 = SURFACE_STYLE_USAGE(.BOTH.,#296669); +#296669 = SURFACE_SIDE_STYLE('',(#296670)); +#296670 = SURFACE_STYLE_FILL_AREA(#296671); +#296671 = FILL_AREA_STYLE('',(#296672)); +#296672 = FILL_AREA_STYLE_COLOUR('',#285989); +#296673 = CURVE_STYLE('',#296674,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296674 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296675 = STYLED_ITEM('color',(#296676),#111676); +#296676 = PRESENTATION_STYLE_ASSIGNMENT((#296677,#296682)); +#296677 = SURFACE_STYLE_USAGE(.BOTH.,#296678); +#296678 = SURFACE_SIDE_STYLE('',(#296679)); +#296679 = SURFACE_STYLE_FILL_AREA(#296680); +#296680 = FILL_AREA_STYLE('',(#296681)); +#296681 = FILL_AREA_STYLE_COLOUR('',#285989); +#296682 = CURVE_STYLE('',#296683,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296684 = STYLED_ITEM('color',(#296685),#111723); +#296685 = PRESENTATION_STYLE_ASSIGNMENT((#296686,#296691)); +#296686 = SURFACE_STYLE_USAGE(.BOTH.,#296687); +#296687 = SURFACE_SIDE_STYLE('',(#296688)); +#296688 = SURFACE_STYLE_FILL_AREA(#296689); +#296689 = FILL_AREA_STYLE('',(#296690)); +#296690 = FILL_AREA_STYLE_COLOUR('',#285989); +#296691 = CURVE_STYLE('',#296692,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296692 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296693 = STYLED_ITEM('color',(#296694),#111740); +#296694 = PRESENTATION_STYLE_ASSIGNMENT((#296695,#296700)); +#296695 = SURFACE_STYLE_USAGE(.BOTH.,#296696); +#296696 = SURFACE_SIDE_STYLE('',(#296697)); +#296697 = SURFACE_STYLE_FILL_AREA(#296698); +#296698 = FILL_AREA_STYLE('',(#296699)); +#296699 = FILL_AREA_STYLE_COLOUR('',#285989); +#296700 = CURVE_STYLE('',#296701,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296701 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296702 = STYLED_ITEM('color',(#296703),#111787); +#296703 = PRESENTATION_STYLE_ASSIGNMENT((#296704,#296709)); +#296704 = SURFACE_STYLE_USAGE(.BOTH.,#296705); +#296705 = SURFACE_SIDE_STYLE('',(#296706)); +#296706 = SURFACE_STYLE_FILL_AREA(#296707); +#296707 = FILL_AREA_STYLE('',(#296708)); +#296708 = FILL_AREA_STYLE_COLOUR('',#285989); +#296709 = CURVE_STYLE('',#296710,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296710 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296711 = STYLED_ITEM('color',(#296712),#111804); +#296712 = PRESENTATION_STYLE_ASSIGNMENT((#296713,#296718)); +#296713 = SURFACE_STYLE_USAGE(.BOTH.,#296714); +#296714 = SURFACE_SIDE_STYLE('',(#296715)); +#296715 = SURFACE_STYLE_FILL_AREA(#296716); +#296716 = FILL_AREA_STYLE('',(#296717)); +#296717 = FILL_AREA_STYLE_COLOUR('',#285989); +#296718 = CURVE_STYLE('',#296719,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296719 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296720 = STYLED_ITEM('color',(#296721),#111851); +#296721 = PRESENTATION_STYLE_ASSIGNMENT((#296722,#296727)); +#296722 = SURFACE_STYLE_USAGE(.BOTH.,#296723); +#296723 = SURFACE_SIDE_STYLE('',(#296724)); +#296724 = SURFACE_STYLE_FILL_AREA(#296725); +#296725 = FILL_AREA_STYLE('',(#296726)); +#296726 = FILL_AREA_STYLE_COLOUR('',#285989); +#296727 = CURVE_STYLE('',#296728,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296728 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296729 = STYLED_ITEM('color',(#296730),#111868); +#296730 = PRESENTATION_STYLE_ASSIGNMENT((#296731,#296736)); +#296731 = SURFACE_STYLE_USAGE(.BOTH.,#296732); +#296732 = SURFACE_SIDE_STYLE('',(#296733)); +#296733 = SURFACE_STYLE_FILL_AREA(#296734); +#296734 = FILL_AREA_STYLE('',(#296735)); +#296735 = FILL_AREA_STYLE_COLOUR('',#285989); +#296736 = CURVE_STYLE('',#296737,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296737 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296738 = STYLED_ITEM('color',(#296739),#111915); +#296739 = PRESENTATION_STYLE_ASSIGNMENT((#296740,#296745)); +#296740 = SURFACE_STYLE_USAGE(.BOTH.,#296741); +#296741 = SURFACE_SIDE_STYLE('',(#296742)); +#296742 = SURFACE_STYLE_FILL_AREA(#296743); +#296743 = FILL_AREA_STYLE('',(#296744)); +#296744 = FILL_AREA_STYLE_COLOUR('',#285989); +#296745 = CURVE_STYLE('',#296746,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296746 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296747 = STYLED_ITEM('color',(#296748),#111932); +#296748 = PRESENTATION_STYLE_ASSIGNMENT((#296749,#296754)); +#296749 = SURFACE_STYLE_USAGE(.BOTH.,#296750); +#296750 = SURFACE_SIDE_STYLE('',(#296751)); +#296751 = SURFACE_STYLE_FILL_AREA(#296752); +#296752 = FILL_AREA_STYLE('',(#296753)); +#296753 = FILL_AREA_STYLE_COLOUR('',#285989); +#296754 = CURVE_STYLE('',#296755,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296755 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296756 = STYLED_ITEM('color',(#296757),#111979); +#296757 = PRESENTATION_STYLE_ASSIGNMENT((#296758,#296763)); +#296758 = SURFACE_STYLE_USAGE(.BOTH.,#296759); +#296759 = SURFACE_SIDE_STYLE('',(#296760)); +#296760 = SURFACE_STYLE_FILL_AREA(#296761); +#296761 = FILL_AREA_STYLE('',(#296762)); +#296762 = FILL_AREA_STYLE_COLOUR('',#285989); +#296763 = CURVE_STYLE('',#296764,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296764 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296765 = STYLED_ITEM('color',(#296766),#111996); +#296766 = PRESENTATION_STYLE_ASSIGNMENT((#296767,#296772)); +#296767 = SURFACE_STYLE_USAGE(.BOTH.,#296768); +#296768 = SURFACE_SIDE_STYLE('',(#296769)); +#296769 = SURFACE_STYLE_FILL_AREA(#296770); +#296770 = FILL_AREA_STYLE('',(#296771)); +#296771 = FILL_AREA_STYLE_COLOUR('',#285989); +#296772 = CURVE_STYLE('',#296773,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296774 = STYLED_ITEM('color',(#296775),#112043); +#296775 = PRESENTATION_STYLE_ASSIGNMENT((#296776,#296781)); +#296776 = SURFACE_STYLE_USAGE(.BOTH.,#296777); +#296777 = SURFACE_SIDE_STYLE('',(#296778)); +#296778 = SURFACE_STYLE_FILL_AREA(#296779); +#296779 = FILL_AREA_STYLE('',(#296780)); +#296780 = FILL_AREA_STYLE_COLOUR('',#285989); +#296781 = CURVE_STYLE('',#296782,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296782 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296783 = STYLED_ITEM('color',(#296784),#112060); +#296784 = PRESENTATION_STYLE_ASSIGNMENT((#296785,#296790)); +#296785 = SURFACE_STYLE_USAGE(.BOTH.,#296786); +#296786 = SURFACE_SIDE_STYLE('',(#296787)); +#296787 = SURFACE_STYLE_FILL_AREA(#296788); +#296788 = FILL_AREA_STYLE('',(#296789)); +#296789 = FILL_AREA_STYLE_COLOUR('',#285989); +#296790 = CURVE_STYLE('',#296791,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296791 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296792 = STYLED_ITEM('color',(#296793),#112107); +#296793 = PRESENTATION_STYLE_ASSIGNMENT((#296794,#296799)); +#296794 = SURFACE_STYLE_USAGE(.BOTH.,#296795); +#296795 = SURFACE_SIDE_STYLE('',(#296796)); +#296796 = SURFACE_STYLE_FILL_AREA(#296797); +#296797 = FILL_AREA_STYLE('',(#296798)); +#296798 = FILL_AREA_STYLE_COLOUR('',#285989); +#296799 = CURVE_STYLE('',#296800,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296800 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296801 = STYLED_ITEM('color',(#296802),#112124); +#296802 = PRESENTATION_STYLE_ASSIGNMENT((#296803,#296808)); +#296803 = SURFACE_STYLE_USAGE(.BOTH.,#296804); +#296804 = SURFACE_SIDE_STYLE('',(#296805)); +#296805 = SURFACE_STYLE_FILL_AREA(#296806); +#296806 = FILL_AREA_STYLE('',(#296807)); +#296807 = FILL_AREA_STYLE_COLOUR('',#285989); +#296808 = CURVE_STYLE('',#296809,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296809 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296810 = STYLED_ITEM('color',(#296811),#112171); +#296811 = PRESENTATION_STYLE_ASSIGNMENT((#296812,#296817)); +#296812 = SURFACE_STYLE_USAGE(.BOTH.,#296813); +#296813 = SURFACE_SIDE_STYLE('',(#296814)); +#296814 = SURFACE_STYLE_FILL_AREA(#296815); +#296815 = FILL_AREA_STYLE('',(#296816)); +#296816 = FILL_AREA_STYLE_COLOUR('',#285989); +#296817 = CURVE_STYLE('',#296818,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296818 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296819 = STYLED_ITEM('color',(#296820),#112188); +#296820 = PRESENTATION_STYLE_ASSIGNMENT((#296821,#296826)); +#296821 = SURFACE_STYLE_USAGE(.BOTH.,#296822); +#296822 = SURFACE_SIDE_STYLE('',(#296823)); +#296823 = SURFACE_STYLE_FILL_AREA(#296824); +#296824 = FILL_AREA_STYLE('',(#296825)); +#296825 = FILL_AREA_STYLE_COLOUR('',#285989); +#296826 = CURVE_STYLE('',#296827,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296827 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296828 = STYLED_ITEM('color',(#296829),#112235); +#296829 = PRESENTATION_STYLE_ASSIGNMENT((#296830,#296835)); +#296830 = SURFACE_STYLE_USAGE(.BOTH.,#296831); +#296831 = SURFACE_SIDE_STYLE('',(#296832)); +#296832 = SURFACE_STYLE_FILL_AREA(#296833); +#296833 = FILL_AREA_STYLE('',(#296834)); +#296834 = FILL_AREA_STYLE_COLOUR('',#270350); +#296835 = CURVE_STYLE('',#296836,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296836 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296837 = STYLED_ITEM('color',(#296838),#112266); +#296838 = PRESENTATION_STYLE_ASSIGNMENT((#296839,#296844)); +#296839 = SURFACE_STYLE_USAGE(.BOTH.,#296840); +#296840 = SURFACE_SIDE_STYLE('',(#296841)); +#296841 = SURFACE_STYLE_FILL_AREA(#296842); +#296842 = FILL_AREA_STYLE('',(#296843)); +#296843 = FILL_AREA_STYLE_COLOUR('',#270350); +#296844 = CURVE_STYLE('',#296845,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296845 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296846 = OVER_RIDING_STYLED_ITEM('overriding color',(#296847),#112280, + #296837); +#296847 = PRESENTATION_STYLE_ASSIGNMENT((#296848,#296853)); +#296848 = SURFACE_STYLE_USAGE(.BOTH.,#296849); +#296849 = SURFACE_SIDE_STYLE('',(#296850)); +#296850 = SURFACE_STYLE_FILL_AREA(#296851); +#296851 = FILL_AREA_STYLE('',(#296852)); +#296852 = FILL_AREA_STYLE_COLOUR('',#285989); +#296853 = CURVE_STYLE('',#296854,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296854 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296855 = OVER_RIDING_STYLED_ITEM('overriding color',(#296856),#112296, + #296837); +#296856 = PRESENTATION_STYLE_ASSIGNMENT((#296857,#296862)); +#296857 = SURFACE_STYLE_USAGE(.BOTH.,#296858); +#296858 = SURFACE_SIDE_STYLE('',(#296859)); +#296859 = SURFACE_STYLE_FILL_AREA(#296860); +#296860 = FILL_AREA_STYLE('',(#296861)); +#296861 = FILL_AREA_STYLE_COLOUR('',#285989); +#296862 = CURVE_STYLE('',#296863,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296864 = STYLED_ITEM('color',(#296865),#112322); +#296865 = PRESENTATION_STYLE_ASSIGNMENT((#296866,#296871)); +#296866 = SURFACE_STYLE_USAGE(.BOTH.,#296867); +#296867 = SURFACE_SIDE_STYLE('',(#296868)); +#296868 = SURFACE_STYLE_FILL_AREA(#296869); +#296869 = FILL_AREA_STYLE('',(#296870)); +#296870 = FILL_AREA_STYLE_COLOUR('',#270350); +#296871 = CURVE_STYLE('',#296872,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296872 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296873 = STYLED_ITEM('color',(#296874),#112346); +#296874 = PRESENTATION_STYLE_ASSIGNMENT((#296875,#296880)); +#296875 = SURFACE_STYLE_USAGE(.BOTH.,#296876); +#296876 = SURFACE_SIDE_STYLE('',(#296877)); +#296877 = SURFACE_STYLE_FILL_AREA(#296878); +#296878 = FILL_AREA_STYLE('',(#296879)); +#296879 = FILL_AREA_STYLE_COLOUR('',#270350); +#296880 = CURVE_STYLE('',#296881,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296881 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296882 = OVER_RIDING_STYLED_ITEM('overriding color',(#296883),#112360, + #296873); +#296883 = PRESENTATION_STYLE_ASSIGNMENT((#296884,#296889)); +#296884 = SURFACE_STYLE_USAGE(.BOTH.,#296885); +#296885 = SURFACE_SIDE_STYLE('',(#296886)); +#296886 = SURFACE_STYLE_FILL_AREA(#296887); +#296887 = FILL_AREA_STYLE('',(#296888)); +#296888 = FILL_AREA_STYLE_COLOUR('',#285989); +#296889 = CURVE_STYLE('',#296890,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296891 = OVER_RIDING_STYLED_ITEM('overriding color',(#296892),#112376, + #296873); +#296892 = PRESENTATION_STYLE_ASSIGNMENT((#296893,#296898)); +#296893 = SURFACE_STYLE_USAGE(.BOTH.,#296894); +#296894 = SURFACE_SIDE_STYLE('',(#296895)); +#296895 = SURFACE_STYLE_FILL_AREA(#296896); +#296896 = FILL_AREA_STYLE('',(#296897)); +#296897 = FILL_AREA_STYLE_COLOUR('',#285989); +#296898 = CURVE_STYLE('',#296899,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296899 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296900 = STYLED_ITEM('color',(#296901),#112395); +#296901 = PRESENTATION_STYLE_ASSIGNMENT((#296902,#296907)); +#296902 = SURFACE_STYLE_USAGE(.BOTH.,#296903); +#296903 = SURFACE_SIDE_STYLE('',(#296904)); +#296904 = SURFACE_STYLE_FILL_AREA(#296905); +#296905 = FILL_AREA_STYLE('',(#296906)); +#296906 = FILL_AREA_STYLE_COLOUR('',#270350); +#296907 = CURVE_STYLE('',#296908,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296908 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296909 = STYLED_ITEM('color',(#296910),#112426); +#296910 = PRESENTATION_STYLE_ASSIGNMENT((#296911,#296916)); +#296911 = SURFACE_STYLE_USAGE(.BOTH.,#296912); +#296912 = SURFACE_SIDE_STYLE('',(#296913)); +#296913 = SURFACE_STYLE_FILL_AREA(#296914); +#296914 = FILL_AREA_STYLE('',(#296915)); +#296915 = FILL_AREA_STYLE_COLOUR('',#270350); +#296916 = CURVE_STYLE('',#296917,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296917 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296918 = OVER_RIDING_STYLED_ITEM('overriding color',(#296919),#112440, + #296909); +#296919 = PRESENTATION_STYLE_ASSIGNMENT((#296920,#296925)); +#296920 = SURFACE_STYLE_USAGE(.BOTH.,#296921); +#296921 = SURFACE_SIDE_STYLE('',(#296922)); +#296922 = SURFACE_STYLE_FILL_AREA(#296923); +#296923 = FILL_AREA_STYLE('',(#296924)); +#296924 = FILL_AREA_STYLE_COLOUR('',#285989); +#296925 = CURVE_STYLE('',#296926,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296926 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296927 = OVER_RIDING_STYLED_ITEM('overriding color',(#296928),#112456, + #296909); +#296928 = PRESENTATION_STYLE_ASSIGNMENT((#296929,#296934)); +#296929 = SURFACE_STYLE_USAGE(.BOTH.,#296930); +#296930 = SURFACE_SIDE_STYLE('',(#296931)); +#296931 = SURFACE_STYLE_FILL_AREA(#296932); +#296932 = FILL_AREA_STYLE('',(#296933)); +#296933 = FILL_AREA_STYLE_COLOUR('',#285989); +#296934 = CURVE_STYLE('',#296935,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296935 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296936 = STYLED_ITEM('color',(#296937),#112482); +#296937 = PRESENTATION_STYLE_ASSIGNMENT((#296938,#296943)); +#296938 = SURFACE_STYLE_USAGE(.BOTH.,#296939); +#296939 = SURFACE_SIDE_STYLE('',(#296940)); +#296940 = SURFACE_STYLE_FILL_AREA(#296941); +#296941 = FILL_AREA_STYLE('',(#296942)); +#296942 = FILL_AREA_STYLE_COLOUR('',#270350); +#296943 = CURVE_STYLE('',#296944,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296944 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296945 = STYLED_ITEM('color',(#296946),#112506); +#296946 = PRESENTATION_STYLE_ASSIGNMENT((#296947,#296952)); +#296947 = SURFACE_STYLE_USAGE(.BOTH.,#296948); +#296948 = SURFACE_SIDE_STYLE('',(#296949)); +#296949 = SURFACE_STYLE_FILL_AREA(#296950); +#296950 = FILL_AREA_STYLE('',(#296951)); +#296951 = FILL_AREA_STYLE_COLOUR('',#270350); +#296952 = CURVE_STYLE('',#296953,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296953 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296954 = OVER_RIDING_STYLED_ITEM('overriding color',(#296955),#112520, + #296945); +#296955 = PRESENTATION_STYLE_ASSIGNMENT((#296956,#296961)); +#296956 = SURFACE_STYLE_USAGE(.BOTH.,#296957); +#296957 = SURFACE_SIDE_STYLE('',(#296958)); +#296958 = SURFACE_STYLE_FILL_AREA(#296959); +#296959 = FILL_AREA_STYLE('',(#296960)); +#296960 = FILL_AREA_STYLE_COLOUR('',#285989); +#296961 = CURVE_STYLE('',#296962,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296962 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296963 = OVER_RIDING_STYLED_ITEM('overriding color',(#296964),#112536, + #296945); +#296964 = PRESENTATION_STYLE_ASSIGNMENT((#296965,#296970)); +#296965 = SURFACE_STYLE_USAGE(.BOTH.,#296966); +#296966 = SURFACE_SIDE_STYLE('',(#296967)); +#296967 = SURFACE_STYLE_FILL_AREA(#296968); +#296968 = FILL_AREA_STYLE('',(#296969)); +#296969 = FILL_AREA_STYLE_COLOUR('',#285989); +#296970 = CURVE_STYLE('',#296971,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296971 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296972 = STYLED_ITEM('color',(#296973),#112555); +#296973 = PRESENTATION_STYLE_ASSIGNMENT((#296974,#296979)); +#296974 = SURFACE_STYLE_USAGE(.BOTH.,#296975); +#296975 = SURFACE_SIDE_STYLE('',(#296976)); +#296976 = SURFACE_STYLE_FILL_AREA(#296977); +#296977 = FILL_AREA_STYLE('',(#296978)); +#296978 = FILL_AREA_STYLE_COLOUR('',#270350); +#296979 = CURVE_STYLE('',#296980,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296980 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296981 = STYLED_ITEM('color',(#296982),#112586); +#296982 = PRESENTATION_STYLE_ASSIGNMENT((#296983,#296988)); +#296983 = SURFACE_STYLE_USAGE(.BOTH.,#296984); +#296984 = SURFACE_SIDE_STYLE('',(#296985)); +#296985 = SURFACE_STYLE_FILL_AREA(#296986); +#296986 = FILL_AREA_STYLE('',(#296987)); +#296987 = FILL_AREA_STYLE_COLOUR('',#270350); +#296988 = CURVE_STYLE('',#296989,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#296989 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296990 = OVER_RIDING_STYLED_ITEM('overriding color',(#296991),#112600, + #296981); +#296991 = PRESENTATION_STYLE_ASSIGNMENT((#296992,#296997)); +#296992 = SURFACE_STYLE_USAGE(.BOTH.,#296993); +#296993 = SURFACE_SIDE_STYLE('',(#296994)); +#296994 = SURFACE_STYLE_FILL_AREA(#296995); +#296995 = FILL_AREA_STYLE('',(#296996)); +#296996 = FILL_AREA_STYLE_COLOUR('',#285989); +#296997 = CURVE_STYLE('',#296998,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#296998 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#296999 = OVER_RIDING_STYLED_ITEM('overriding color',(#297000),#112616, + #296981); +#297000 = PRESENTATION_STYLE_ASSIGNMENT((#297001,#297006)); +#297001 = SURFACE_STYLE_USAGE(.BOTH.,#297002); +#297002 = SURFACE_SIDE_STYLE('',(#297003)); +#297003 = SURFACE_STYLE_FILL_AREA(#297004); +#297004 = FILL_AREA_STYLE('',(#297005)); +#297005 = FILL_AREA_STYLE_COLOUR('',#285989); +#297006 = CURVE_STYLE('',#297007,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297007 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297008 = STYLED_ITEM('color',(#297009),#112642); +#297009 = PRESENTATION_STYLE_ASSIGNMENT((#297010,#297015)); +#297010 = SURFACE_STYLE_USAGE(.BOTH.,#297011); +#297011 = SURFACE_SIDE_STYLE('',(#297012)); +#297012 = SURFACE_STYLE_FILL_AREA(#297013); +#297013 = FILL_AREA_STYLE('',(#297014)); +#297014 = FILL_AREA_STYLE_COLOUR('',#270350); +#297015 = CURVE_STYLE('',#297016,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297016 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297017 = STYLED_ITEM('color',(#297018),#112666); +#297018 = PRESENTATION_STYLE_ASSIGNMENT((#297019,#297024)); +#297019 = SURFACE_STYLE_USAGE(.BOTH.,#297020); +#297020 = SURFACE_SIDE_STYLE('',(#297021)); +#297021 = SURFACE_STYLE_FILL_AREA(#297022); +#297022 = FILL_AREA_STYLE('',(#297023)); +#297023 = FILL_AREA_STYLE_COLOUR('',#270350); +#297024 = CURVE_STYLE('',#297025,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297025 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297026 = OVER_RIDING_STYLED_ITEM('overriding color',(#297027),#112680, + #297017); +#297027 = PRESENTATION_STYLE_ASSIGNMENT((#297028,#297033)); +#297028 = SURFACE_STYLE_USAGE(.BOTH.,#297029); +#297029 = SURFACE_SIDE_STYLE('',(#297030)); +#297030 = SURFACE_STYLE_FILL_AREA(#297031); +#297031 = FILL_AREA_STYLE('',(#297032)); +#297032 = FILL_AREA_STYLE_COLOUR('',#285989); +#297033 = CURVE_STYLE('',#297034,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297034 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297035 = OVER_RIDING_STYLED_ITEM('overriding color',(#297036),#112696, + #297017); +#297036 = PRESENTATION_STYLE_ASSIGNMENT((#297037,#297042)); +#297037 = SURFACE_STYLE_USAGE(.BOTH.,#297038); +#297038 = SURFACE_SIDE_STYLE('',(#297039)); +#297039 = SURFACE_STYLE_FILL_AREA(#297040); +#297040 = FILL_AREA_STYLE('',(#297041)); +#297041 = FILL_AREA_STYLE_COLOUR('',#285989); +#297042 = CURVE_STYLE('',#297043,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297043 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297044 = STYLED_ITEM('color',(#297045),#112715); +#297045 = PRESENTATION_STYLE_ASSIGNMENT((#297046,#297051)); +#297046 = SURFACE_STYLE_USAGE(.BOTH.,#297047); +#297047 = SURFACE_SIDE_STYLE('',(#297048)); +#297048 = SURFACE_STYLE_FILL_AREA(#297049); +#297049 = FILL_AREA_STYLE('',(#297050)); +#297050 = FILL_AREA_STYLE_COLOUR('',#270350); +#297051 = CURVE_STYLE('',#297052,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297052 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297053 = STYLED_ITEM('color',(#297054),#112746); +#297054 = PRESENTATION_STYLE_ASSIGNMENT((#297055,#297060)); +#297055 = SURFACE_STYLE_USAGE(.BOTH.,#297056); +#297056 = SURFACE_SIDE_STYLE('',(#297057)); +#297057 = SURFACE_STYLE_FILL_AREA(#297058); +#297058 = FILL_AREA_STYLE('',(#297059)); +#297059 = FILL_AREA_STYLE_COLOUR('',#270350); +#297060 = CURVE_STYLE('',#297061,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297061 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297062 = OVER_RIDING_STYLED_ITEM('overriding color',(#297063),#112760, + #297053); +#297063 = PRESENTATION_STYLE_ASSIGNMENT((#297064,#297069)); +#297064 = SURFACE_STYLE_USAGE(.BOTH.,#297065); +#297065 = SURFACE_SIDE_STYLE('',(#297066)); +#297066 = SURFACE_STYLE_FILL_AREA(#297067); +#297067 = FILL_AREA_STYLE('',(#297068)); +#297068 = FILL_AREA_STYLE_COLOUR('',#285989); +#297069 = CURVE_STYLE('',#297070,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297071 = OVER_RIDING_STYLED_ITEM('overriding color',(#297072),#112776, + #297053); +#297072 = PRESENTATION_STYLE_ASSIGNMENT((#297073,#297078)); +#297073 = SURFACE_STYLE_USAGE(.BOTH.,#297074); +#297074 = SURFACE_SIDE_STYLE('',(#297075)); +#297075 = SURFACE_STYLE_FILL_AREA(#297076); +#297076 = FILL_AREA_STYLE('',(#297077)); +#297077 = FILL_AREA_STYLE_COLOUR('',#285989); +#297078 = CURVE_STYLE('',#297079,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297079 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297080 = STYLED_ITEM('color',(#297081),#112802); +#297081 = PRESENTATION_STYLE_ASSIGNMENT((#297082,#297087)); +#297082 = SURFACE_STYLE_USAGE(.BOTH.,#297083); +#297083 = SURFACE_SIDE_STYLE('',(#297084)); +#297084 = SURFACE_STYLE_FILL_AREA(#297085); +#297085 = FILL_AREA_STYLE('',(#297086)); +#297086 = FILL_AREA_STYLE_COLOUR('',#270350); +#297087 = CURVE_STYLE('',#297088,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297089 = STYLED_ITEM('color',(#297090),#112826); +#297090 = PRESENTATION_STYLE_ASSIGNMENT((#297091,#297096)); +#297091 = SURFACE_STYLE_USAGE(.BOTH.,#297092); +#297092 = SURFACE_SIDE_STYLE('',(#297093)); +#297093 = SURFACE_STYLE_FILL_AREA(#297094); +#297094 = FILL_AREA_STYLE('',(#297095)); +#297095 = FILL_AREA_STYLE_COLOUR('',#270350); +#297096 = CURVE_STYLE('',#297097,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297098 = OVER_RIDING_STYLED_ITEM('overriding color',(#297099),#112840, + #297089); +#297099 = PRESENTATION_STYLE_ASSIGNMENT((#297100,#297105)); +#297100 = SURFACE_STYLE_USAGE(.BOTH.,#297101); +#297101 = SURFACE_SIDE_STYLE('',(#297102)); +#297102 = SURFACE_STYLE_FILL_AREA(#297103); +#297103 = FILL_AREA_STYLE('',(#297104)); +#297104 = FILL_AREA_STYLE_COLOUR('',#285989); +#297105 = CURVE_STYLE('',#297106,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297107 = OVER_RIDING_STYLED_ITEM('overriding color',(#297108),#112856, + #297089); +#297108 = PRESENTATION_STYLE_ASSIGNMENT((#297109,#297114)); +#297109 = SURFACE_STYLE_USAGE(.BOTH.,#297110); +#297110 = SURFACE_SIDE_STYLE('',(#297111)); +#297111 = SURFACE_STYLE_FILL_AREA(#297112); +#297112 = FILL_AREA_STYLE('',(#297113)); +#297113 = FILL_AREA_STYLE_COLOUR('',#285989); +#297114 = CURVE_STYLE('',#297115,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297116 = STYLED_ITEM('color',(#297117),#112875); +#297117 = PRESENTATION_STYLE_ASSIGNMENT((#297118,#297123)); +#297118 = SURFACE_STYLE_USAGE(.BOTH.,#297119); +#297119 = SURFACE_SIDE_STYLE('',(#297120)); +#297120 = SURFACE_STYLE_FILL_AREA(#297121); +#297121 = FILL_AREA_STYLE('',(#297122)); +#297122 = FILL_AREA_STYLE_COLOUR('',#270350); +#297123 = CURVE_STYLE('',#297124,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297125 = STYLED_ITEM('color',(#297126),#112906); +#297126 = PRESENTATION_STYLE_ASSIGNMENT((#297127,#297132)); +#297127 = SURFACE_STYLE_USAGE(.BOTH.,#297128); +#297128 = SURFACE_SIDE_STYLE('',(#297129)); +#297129 = SURFACE_STYLE_FILL_AREA(#297130); +#297130 = FILL_AREA_STYLE('',(#297131)); +#297131 = FILL_AREA_STYLE_COLOUR('',#270350); +#297132 = CURVE_STYLE('',#297133,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297134 = OVER_RIDING_STYLED_ITEM('overriding color',(#297135),#112920, + #297125); +#297135 = PRESENTATION_STYLE_ASSIGNMENT((#297136,#297141)); +#297136 = SURFACE_STYLE_USAGE(.BOTH.,#297137); +#297137 = SURFACE_SIDE_STYLE('',(#297138)); +#297138 = SURFACE_STYLE_FILL_AREA(#297139); +#297139 = FILL_AREA_STYLE('',(#297140)); +#297140 = FILL_AREA_STYLE_COLOUR('',#285989); +#297141 = CURVE_STYLE('',#297142,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297143 = OVER_RIDING_STYLED_ITEM('overriding color',(#297144),#112936, + #297125); +#297144 = PRESENTATION_STYLE_ASSIGNMENT((#297145,#297150)); +#297145 = SURFACE_STYLE_USAGE(.BOTH.,#297146); +#297146 = SURFACE_SIDE_STYLE('',(#297147)); +#297147 = SURFACE_STYLE_FILL_AREA(#297148); +#297148 = FILL_AREA_STYLE('',(#297149)); +#297149 = FILL_AREA_STYLE_COLOUR('',#285989); +#297150 = CURVE_STYLE('',#297151,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297152 = STYLED_ITEM('color',(#297153),#112962); +#297153 = PRESENTATION_STYLE_ASSIGNMENT((#297154,#297159)); +#297154 = SURFACE_STYLE_USAGE(.BOTH.,#297155); +#297155 = SURFACE_SIDE_STYLE('',(#297156)); +#297156 = SURFACE_STYLE_FILL_AREA(#297157); +#297157 = FILL_AREA_STYLE('',(#297158)); +#297158 = FILL_AREA_STYLE_COLOUR('',#270350); +#297159 = CURVE_STYLE('',#297160,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297161 = STYLED_ITEM('color',(#297162),#112986); +#297162 = PRESENTATION_STYLE_ASSIGNMENT((#297163,#297168)); +#297163 = SURFACE_STYLE_USAGE(.BOTH.,#297164); +#297164 = SURFACE_SIDE_STYLE('',(#297165)); +#297165 = SURFACE_STYLE_FILL_AREA(#297166); +#297166 = FILL_AREA_STYLE('',(#297167)); +#297167 = FILL_AREA_STYLE_COLOUR('',#270350); +#297168 = CURVE_STYLE('',#297169,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297170 = OVER_RIDING_STYLED_ITEM('overriding color',(#297171),#113000, + #297161); +#297171 = PRESENTATION_STYLE_ASSIGNMENT((#297172,#297177)); +#297172 = SURFACE_STYLE_USAGE(.BOTH.,#297173); +#297173 = SURFACE_SIDE_STYLE('',(#297174)); +#297174 = SURFACE_STYLE_FILL_AREA(#297175); +#297175 = FILL_AREA_STYLE('',(#297176)); +#297176 = FILL_AREA_STYLE_COLOUR('',#285989); +#297177 = CURVE_STYLE('',#297178,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297179 = OVER_RIDING_STYLED_ITEM('overriding color',(#297180),#113016, + #297161); +#297180 = PRESENTATION_STYLE_ASSIGNMENT((#297181,#297186)); +#297181 = SURFACE_STYLE_USAGE(.BOTH.,#297182); +#297182 = SURFACE_SIDE_STYLE('',(#297183)); +#297183 = SURFACE_STYLE_FILL_AREA(#297184); +#297184 = FILL_AREA_STYLE('',(#297185)); +#297185 = FILL_AREA_STYLE_COLOUR('',#285989); +#297186 = CURVE_STYLE('',#297187,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297188 = STYLED_ITEM('color',(#297189),#113035); +#297189 = PRESENTATION_STYLE_ASSIGNMENT((#297190,#297195)); +#297190 = SURFACE_STYLE_USAGE(.BOTH.,#297191); +#297191 = SURFACE_SIDE_STYLE('',(#297192)); +#297192 = SURFACE_STYLE_FILL_AREA(#297193); +#297193 = FILL_AREA_STYLE('',(#297194)); +#297194 = FILL_AREA_STYLE_COLOUR('',#270350); +#297195 = CURVE_STYLE('',#297196,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297197 = STYLED_ITEM('color',(#297198),#113066); +#297198 = PRESENTATION_STYLE_ASSIGNMENT((#297199,#297204)); +#297199 = SURFACE_STYLE_USAGE(.BOTH.,#297200); +#297200 = SURFACE_SIDE_STYLE('',(#297201)); +#297201 = SURFACE_STYLE_FILL_AREA(#297202); +#297202 = FILL_AREA_STYLE('',(#297203)); +#297203 = FILL_AREA_STYLE_COLOUR('',#270350); +#297204 = CURVE_STYLE('',#297205,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297206 = OVER_RIDING_STYLED_ITEM('overriding color',(#297207),#113080, + #297197); +#297207 = PRESENTATION_STYLE_ASSIGNMENT((#297208,#297213)); +#297208 = SURFACE_STYLE_USAGE(.BOTH.,#297209); +#297209 = SURFACE_SIDE_STYLE('',(#297210)); +#297210 = SURFACE_STYLE_FILL_AREA(#297211); +#297211 = FILL_AREA_STYLE('',(#297212)); +#297212 = FILL_AREA_STYLE_COLOUR('',#285989); +#297213 = CURVE_STYLE('',#297214,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297215 = OVER_RIDING_STYLED_ITEM('overriding color',(#297216),#113096, + #297197); +#297216 = PRESENTATION_STYLE_ASSIGNMENT((#297217,#297222)); +#297217 = SURFACE_STYLE_USAGE(.BOTH.,#297218); +#297218 = SURFACE_SIDE_STYLE('',(#297219)); +#297219 = SURFACE_STYLE_FILL_AREA(#297220); +#297220 = FILL_AREA_STYLE('',(#297221)); +#297221 = FILL_AREA_STYLE_COLOUR('',#285989); +#297222 = CURVE_STYLE('',#297223,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297224 = STYLED_ITEM('color',(#297225),#113122); +#297225 = PRESENTATION_STYLE_ASSIGNMENT((#297226,#297231)); +#297226 = SURFACE_STYLE_USAGE(.BOTH.,#297227); +#297227 = SURFACE_SIDE_STYLE('',(#297228)); +#297228 = SURFACE_STYLE_FILL_AREA(#297229); +#297229 = FILL_AREA_STYLE('',(#297230)); +#297230 = FILL_AREA_STYLE_COLOUR('',#270350); +#297231 = CURVE_STYLE('',#297232,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297233 = STYLED_ITEM('color',(#297234),#113146); +#297234 = PRESENTATION_STYLE_ASSIGNMENT((#297235,#297240)); +#297235 = SURFACE_STYLE_USAGE(.BOTH.,#297236); +#297236 = SURFACE_SIDE_STYLE('',(#297237)); +#297237 = SURFACE_STYLE_FILL_AREA(#297238); +#297238 = FILL_AREA_STYLE('',(#297239)); +#297239 = FILL_AREA_STYLE_COLOUR('',#270350); +#297240 = CURVE_STYLE('',#297241,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297242 = OVER_RIDING_STYLED_ITEM('overriding color',(#297243),#113160, + #297233); +#297243 = PRESENTATION_STYLE_ASSIGNMENT((#297244,#297249)); +#297244 = SURFACE_STYLE_USAGE(.BOTH.,#297245); +#297245 = SURFACE_SIDE_STYLE('',(#297246)); +#297246 = SURFACE_STYLE_FILL_AREA(#297247); +#297247 = FILL_AREA_STYLE('',(#297248)); +#297248 = FILL_AREA_STYLE_COLOUR('',#285989); +#297249 = CURVE_STYLE('',#297250,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297251 = OVER_RIDING_STYLED_ITEM('overriding color',(#297252),#113176, + #297233); +#297252 = PRESENTATION_STYLE_ASSIGNMENT((#297253,#297258)); +#297253 = SURFACE_STYLE_USAGE(.BOTH.,#297254); +#297254 = SURFACE_SIDE_STYLE('',(#297255)); +#297255 = SURFACE_STYLE_FILL_AREA(#297256); +#297256 = FILL_AREA_STYLE('',(#297257)); +#297257 = FILL_AREA_STYLE_COLOUR('',#285989); +#297258 = CURVE_STYLE('',#297259,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297260 = STYLED_ITEM('color',(#297261),#113195); +#297261 = PRESENTATION_STYLE_ASSIGNMENT((#297262,#297267)); +#297262 = SURFACE_STYLE_USAGE(.BOTH.,#297263); +#297263 = SURFACE_SIDE_STYLE('',(#297264)); +#297264 = SURFACE_STYLE_FILL_AREA(#297265); +#297265 = FILL_AREA_STYLE('',(#297266)); +#297266 = FILL_AREA_STYLE_COLOUR('',#285989); +#297267 = CURVE_STYLE('',#297268,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297269 = STYLED_ITEM('color',(#297270),#113212); +#297270 = PRESENTATION_STYLE_ASSIGNMENT((#297271,#297276)); +#297271 = SURFACE_STYLE_USAGE(.BOTH.,#297272); +#297272 = SURFACE_SIDE_STYLE('',(#297273)); +#297273 = SURFACE_STYLE_FILL_AREA(#297274); +#297274 = FILL_AREA_STYLE('',(#297275)); +#297275 = FILL_AREA_STYLE_COLOUR('',#285989); +#297276 = CURVE_STYLE('',#297277,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297278 = STYLED_ITEM('color',(#297279),#113229); +#297279 = PRESENTATION_STYLE_ASSIGNMENT((#297280,#297285)); +#297280 = SURFACE_STYLE_USAGE(.BOTH.,#297281); +#297281 = SURFACE_SIDE_STYLE('',(#297282)); +#297282 = SURFACE_STYLE_FILL_AREA(#297283); +#297283 = FILL_AREA_STYLE('',(#297284)); +#297284 = FILL_AREA_STYLE_COLOUR('',#285989); +#297285 = CURVE_STYLE('',#297286,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297287 = STYLED_ITEM('color',(#297288),#113246); +#297288 = PRESENTATION_STYLE_ASSIGNMENT((#297289,#297294)); +#297289 = SURFACE_STYLE_USAGE(.BOTH.,#297290); +#297290 = SURFACE_SIDE_STYLE('',(#297291)); +#297291 = SURFACE_STYLE_FILL_AREA(#297292); +#297292 = FILL_AREA_STYLE('',(#297293)); +#297293 = FILL_AREA_STYLE_COLOUR('',#285989); +#297294 = CURVE_STYLE('',#297295,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297296 = STYLED_ITEM('color',(#297297),#113263); +#297297 = PRESENTATION_STYLE_ASSIGNMENT((#297298,#297303)); +#297298 = SURFACE_STYLE_USAGE(.BOTH.,#297299); +#297299 = SURFACE_SIDE_STYLE('',(#297300)); +#297300 = SURFACE_STYLE_FILL_AREA(#297301); +#297301 = FILL_AREA_STYLE('',(#297302)); +#297302 = FILL_AREA_STYLE_COLOUR('',#285989); +#297303 = CURVE_STYLE('',#297304,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297305 = STYLED_ITEM('color',(#297306),#113275); +#297306 = PRESENTATION_STYLE_ASSIGNMENT((#297307,#297312)); +#297307 = SURFACE_STYLE_USAGE(.BOTH.,#297308); +#297308 = SURFACE_SIDE_STYLE('',(#297309)); +#297309 = SURFACE_STYLE_FILL_AREA(#297310); +#297310 = FILL_AREA_STYLE('',(#297311)); +#297311 = FILL_AREA_STYLE_COLOUR('',#285989); +#297312 = CURVE_STYLE('',#297313,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297314 = STYLED_ITEM('color',(#297315),#113292); +#297315 = PRESENTATION_STYLE_ASSIGNMENT((#297316,#297321)); +#297316 = SURFACE_STYLE_USAGE(.BOTH.,#297317); +#297317 = SURFACE_SIDE_STYLE('',(#297318)); +#297318 = SURFACE_STYLE_FILL_AREA(#297319); +#297319 = FILL_AREA_STYLE('',(#297320)); +#297320 = FILL_AREA_STYLE_COLOUR('',#285989); +#297321 = CURVE_STYLE('',#297322,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297323 = STYLED_ITEM('color',(#297324),#113309); +#297324 = PRESENTATION_STYLE_ASSIGNMENT((#297325,#297330)); +#297325 = SURFACE_STYLE_USAGE(.BOTH.,#297326); +#297326 = SURFACE_SIDE_STYLE('',(#297327)); +#297327 = SURFACE_STYLE_FILL_AREA(#297328); +#297328 = FILL_AREA_STYLE('',(#297329)); +#297329 = FILL_AREA_STYLE_COLOUR('',#285989); +#297330 = CURVE_STYLE('',#297331,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297332 = STYLED_ITEM('color',(#297333),#113326); +#297333 = PRESENTATION_STYLE_ASSIGNMENT((#297334,#297339)); +#297334 = SURFACE_STYLE_USAGE(.BOTH.,#297335); +#297335 = SURFACE_SIDE_STYLE('',(#297336)); +#297336 = SURFACE_STYLE_FILL_AREA(#297337); +#297337 = FILL_AREA_STYLE('',(#297338)); +#297338 = FILL_AREA_STYLE_COLOUR('',#285989); +#297339 = CURVE_STYLE('',#297340,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297341 = STYLED_ITEM('color',(#297342),#113343); +#297342 = PRESENTATION_STYLE_ASSIGNMENT((#297343,#297348)); +#297343 = SURFACE_STYLE_USAGE(.BOTH.,#297344); +#297344 = SURFACE_SIDE_STYLE('',(#297345)); +#297345 = SURFACE_STYLE_FILL_AREA(#297346); +#297346 = FILL_AREA_STYLE('',(#297347)); +#297347 = FILL_AREA_STYLE_COLOUR('',#285989); +#297348 = CURVE_STYLE('',#297349,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297350 = STYLED_ITEM('color',(#297351),#113355); +#297351 = PRESENTATION_STYLE_ASSIGNMENT((#297352,#297357)); +#297352 = SURFACE_STYLE_USAGE(.BOTH.,#297353); +#297353 = SURFACE_SIDE_STYLE('',(#297354)); +#297354 = SURFACE_STYLE_FILL_AREA(#297355); +#297355 = FILL_AREA_STYLE('',(#297356)); +#297356 = FILL_AREA_STYLE_COLOUR('',#285989); +#297357 = CURVE_STYLE('',#297358,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297359 = STYLED_ITEM('color',(#297360),#113372); +#297360 = PRESENTATION_STYLE_ASSIGNMENT((#297361,#297366)); +#297361 = SURFACE_STYLE_USAGE(.BOTH.,#297362); +#297362 = SURFACE_SIDE_STYLE('',(#297363)); +#297363 = SURFACE_STYLE_FILL_AREA(#297364); +#297364 = FILL_AREA_STYLE('',(#297365)); +#297365 = FILL_AREA_STYLE_COLOUR('',#285989); +#297366 = CURVE_STYLE('',#297367,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297368 = STYLED_ITEM('color',(#297369),#113389); +#297369 = PRESENTATION_STYLE_ASSIGNMENT((#297370,#297375)); +#297370 = SURFACE_STYLE_USAGE(.BOTH.,#297371); +#297371 = SURFACE_SIDE_STYLE('',(#297372)); +#297372 = SURFACE_STYLE_FILL_AREA(#297373); +#297373 = FILL_AREA_STYLE('',(#297374)); +#297374 = FILL_AREA_STYLE_COLOUR('',#285989); +#297375 = CURVE_STYLE('',#297376,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297377 = STYLED_ITEM('color',(#297378),#113406); +#297378 = PRESENTATION_STYLE_ASSIGNMENT((#297379,#297384)); +#297379 = SURFACE_STYLE_USAGE(.BOTH.,#297380); +#297380 = SURFACE_SIDE_STYLE('',(#297381)); +#297381 = SURFACE_STYLE_FILL_AREA(#297382); +#297382 = FILL_AREA_STYLE('',(#297383)); +#297383 = FILL_AREA_STYLE_COLOUR('',#285989); +#297384 = CURVE_STYLE('',#297385,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297386 = STYLED_ITEM('color',(#297387),#113423); +#297387 = PRESENTATION_STYLE_ASSIGNMENT((#297388,#297393)); +#297388 = SURFACE_STYLE_USAGE(.BOTH.,#297389); +#297389 = SURFACE_SIDE_STYLE('',(#297390)); +#297390 = SURFACE_STYLE_FILL_AREA(#297391); +#297391 = FILL_AREA_STYLE('',(#297392)); +#297392 = FILL_AREA_STYLE_COLOUR('',#285989); +#297393 = CURVE_STYLE('',#297394,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297395 = STYLED_ITEM('color',(#297396),#113435); +#297396 = PRESENTATION_STYLE_ASSIGNMENT((#297397,#297402)); +#297397 = SURFACE_STYLE_USAGE(.BOTH.,#297398); +#297398 = SURFACE_SIDE_STYLE('',(#297399)); +#297399 = SURFACE_STYLE_FILL_AREA(#297400); +#297400 = FILL_AREA_STYLE('',(#297401)); +#297401 = FILL_AREA_STYLE_COLOUR('',#285989); +#297402 = CURVE_STYLE('',#297403,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297404 = STYLED_ITEM('color',(#297405),#113452); +#297405 = PRESENTATION_STYLE_ASSIGNMENT((#297406,#297411)); +#297406 = SURFACE_STYLE_USAGE(.BOTH.,#297407); +#297407 = SURFACE_SIDE_STYLE('',(#297408)); +#297408 = SURFACE_STYLE_FILL_AREA(#297409); +#297409 = FILL_AREA_STYLE('',(#297410)); +#297410 = FILL_AREA_STYLE_COLOUR('',#285989); +#297411 = CURVE_STYLE('',#297412,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297413 = STYLED_ITEM('color',(#297414),#113469); +#297414 = PRESENTATION_STYLE_ASSIGNMENT((#297415,#297420)); +#297415 = SURFACE_STYLE_USAGE(.BOTH.,#297416); +#297416 = SURFACE_SIDE_STYLE('',(#297417)); +#297417 = SURFACE_STYLE_FILL_AREA(#297418); +#297418 = FILL_AREA_STYLE('',(#297419)); +#297419 = FILL_AREA_STYLE_COLOUR('',#285989); +#297420 = CURVE_STYLE('',#297421,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297422 = STYLED_ITEM('color',(#297423),#113486); +#297423 = PRESENTATION_STYLE_ASSIGNMENT((#297424,#297429)); +#297424 = SURFACE_STYLE_USAGE(.BOTH.,#297425); +#297425 = SURFACE_SIDE_STYLE('',(#297426)); +#297426 = SURFACE_STYLE_FILL_AREA(#297427); +#297427 = FILL_AREA_STYLE('',(#297428)); +#297428 = FILL_AREA_STYLE_COLOUR('',#285989); +#297429 = CURVE_STYLE('',#297430,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297431 = STYLED_ITEM('color',(#297432),#113503); +#297432 = PRESENTATION_STYLE_ASSIGNMENT((#297433,#297438)); +#297433 = SURFACE_STYLE_USAGE(.BOTH.,#297434); +#297434 = SURFACE_SIDE_STYLE('',(#297435)); +#297435 = SURFACE_STYLE_FILL_AREA(#297436); +#297436 = FILL_AREA_STYLE('',(#297437)); +#297437 = FILL_AREA_STYLE_COLOUR('',#285989); +#297438 = CURVE_STYLE('',#297439,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297440 = STYLED_ITEM('color',(#297441),#113515); +#297441 = PRESENTATION_STYLE_ASSIGNMENT((#297442,#297447)); +#297442 = SURFACE_STYLE_USAGE(.BOTH.,#297443); +#297443 = SURFACE_SIDE_STYLE('',(#297444)); +#297444 = SURFACE_STYLE_FILL_AREA(#297445); +#297445 = FILL_AREA_STYLE('',(#297446)); +#297446 = FILL_AREA_STYLE_COLOUR('',#285989); +#297447 = CURVE_STYLE('',#297448,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297449 = STYLED_ITEM('color',(#297450),#113532); +#297450 = PRESENTATION_STYLE_ASSIGNMENT((#297451,#297456)); +#297451 = SURFACE_STYLE_USAGE(.BOTH.,#297452); +#297452 = SURFACE_SIDE_STYLE('',(#297453)); +#297453 = SURFACE_STYLE_FILL_AREA(#297454); +#297454 = FILL_AREA_STYLE('',(#297455)); +#297455 = FILL_AREA_STYLE_COLOUR('',#285989); +#297456 = CURVE_STYLE('',#297457,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297458 = STYLED_ITEM('color',(#297459),#113549); +#297459 = PRESENTATION_STYLE_ASSIGNMENT((#297460,#297465)); +#297460 = SURFACE_STYLE_USAGE(.BOTH.,#297461); +#297461 = SURFACE_SIDE_STYLE('',(#297462)); +#297462 = SURFACE_STYLE_FILL_AREA(#297463); +#297463 = FILL_AREA_STYLE('',(#297464)); +#297464 = FILL_AREA_STYLE_COLOUR('',#285989); +#297465 = CURVE_STYLE('',#297466,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297467 = STYLED_ITEM('color',(#297468),#113566); +#297468 = PRESENTATION_STYLE_ASSIGNMENT((#297469,#297474)); +#297469 = SURFACE_STYLE_USAGE(.BOTH.,#297470); +#297470 = SURFACE_SIDE_STYLE('',(#297471)); +#297471 = SURFACE_STYLE_FILL_AREA(#297472); +#297472 = FILL_AREA_STYLE('',(#297473)); +#297473 = FILL_AREA_STYLE_COLOUR('',#285989); +#297474 = CURVE_STYLE('',#297475,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297476 = STYLED_ITEM('color',(#297477),#113583); +#297477 = PRESENTATION_STYLE_ASSIGNMENT((#297478,#297483)); +#297478 = SURFACE_STYLE_USAGE(.BOTH.,#297479); +#297479 = SURFACE_SIDE_STYLE('',(#297480)); +#297480 = SURFACE_STYLE_FILL_AREA(#297481); +#297481 = FILL_AREA_STYLE('',(#297482)); +#297482 = FILL_AREA_STYLE_COLOUR('',#285989); +#297483 = CURVE_STYLE('',#297484,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297485 = STYLED_ITEM('color',(#297486),#113595); +#297486 = PRESENTATION_STYLE_ASSIGNMENT((#297487,#297492)); +#297487 = SURFACE_STYLE_USAGE(.BOTH.,#297488); +#297488 = SURFACE_SIDE_STYLE('',(#297489)); +#297489 = SURFACE_STYLE_FILL_AREA(#297490); +#297490 = FILL_AREA_STYLE('',(#297491)); +#297491 = FILL_AREA_STYLE_COLOUR('',#285989); +#297492 = CURVE_STYLE('',#297493,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297494 = STYLED_ITEM('color',(#297495),#113612); +#297495 = PRESENTATION_STYLE_ASSIGNMENT((#297496,#297501)); +#297496 = SURFACE_STYLE_USAGE(.BOTH.,#297497); +#297497 = SURFACE_SIDE_STYLE('',(#297498)); +#297498 = SURFACE_STYLE_FILL_AREA(#297499); +#297499 = FILL_AREA_STYLE('',(#297500)); +#297500 = FILL_AREA_STYLE_COLOUR('',#285989); +#297501 = CURVE_STYLE('',#297502,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297503 = STYLED_ITEM('color',(#297504),#113629); +#297504 = PRESENTATION_STYLE_ASSIGNMENT((#297505,#297510)); +#297505 = SURFACE_STYLE_USAGE(.BOTH.,#297506); +#297506 = SURFACE_SIDE_STYLE('',(#297507)); +#297507 = SURFACE_STYLE_FILL_AREA(#297508); +#297508 = FILL_AREA_STYLE('',(#297509)); +#297509 = FILL_AREA_STYLE_COLOUR('',#285989); +#297510 = CURVE_STYLE('',#297511,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297512 = STYLED_ITEM('color',(#297513),#113646); +#297513 = PRESENTATION_STYLE_ASSIGNMENT((#297514,#297519)); +#297514 = SURFACE_STYLE_USAGE(.BOTH.,#297515); +#297515 = SURFACE_SIDE_STYLE('',(#297516)); +#297516 = SURFACE_STYLE_FILL_AREA(#297517); +#297517 = FILL_AREA_STYLE('',(#297518)); +#297518 = FILL_AREA_STYLE_COLOUR('',#285989); +#297519 = CURVE_STYLE('',#297520,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297521 = STYLED_ITEM('color',(#297522),#113663); +#297522 = PRESENTATION_STYLE_ASSIGNMENT((#297523,#297528)); +#297523 = SURFACE_STYLE_USAGE(.BOTH.,#297524); +#297524 = SURFACE_SIDE_STYLE('',(#297525)); +#297525 = SURFACE_STYLE_FILL_AREA(#297526); +#297526 = FILL_AREA_STYLE('',(#297527)); +#297527 = FILL_AREA_STYLE_COLOUR('',#285989); +#297528 = CURVE_STYLE('',#297529,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297530 = STYLED_ITEM('color',(#297531),#113675); +#297531 = PRESENTATION_STYLE_ASSIGNMENT((#297532,#297537)); +#297532 = SURFACE_STYLE_USAGE(.BOTH.,#297533); +#297533 = SURFACE_SIDE_STYLE('',(#297534)); +#297534 = SURFACE_STYLE_FILL_AREA(#297535); +#297535 = FILL_AREA_STYLE('',(#297536)); +#297536 = FILL_AREA_STYLE_COLOUR('',#270350); +#297537 = CURVE_STYLE('',#297538,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297539 = OVER_RIDING_STYLED_ITEM('overriding color',(#297540),#113682, + #297530); +#297540 = PRESENTATION_STYLE_ASSIGNMENT((#297541,#297546)); +#297541 = SURFACE_STYLE_USAGE(.BOTH.,#297542); +#297542 = SURFACE_SIDE_STYLE('',(#297543)); +#297543 = SURFACE_STYLE_FILL_AREA(#297544); +#297544 = FILL_AREA_STYLE('',(#297545)); +#297545 = FILL_AREA_STYLE_COLOUR('',#285989); +#297546 = CURVE_STYLE('',#297547,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297548 = STYLED_ITEM('color',(#297549),#113692); +#297549 = PRESENTATION_STYLE_ASSIGNMENT((#297550,#297555)); +#297550 = SURFACE_STYLE_USAGE(.BOTH.,#297551); +#297551 = SURFACE_SIDE_STYLE('',(#297552)); +#297552 = SURFACE_STYLE_FILL_AREA(#297553); +#297553 = FILL_AREA_STYLE('',(#297554)); +#297554 = FILL_AREA_STYLE_COLOUR('',#270350); +#297555 = CURVE_STYLE('',#297556,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297557 = OVER_RIDING_STYLED_ITEM('overriding color',(#297558),#113697, + #297548); +#297558 = PRESENTATION_STYLE_ASSIGNMENT((#297559,#297564)); +#297559 = SURFACE_STYLE_USAGE(.BOTH.,#297560); +#297560 = SURFACE_SIDE_STYLE('',(#297561)); +#297561 = SURFACE_STYLE_FILL_AREA(#297562); +#297562 = FILL_AREA_STYLE('',(#297563)); +#297563 = FILL_AREA_STYLE_COLOUR('',#285989); +#297564 = CURVE_STYLE('',#297565,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297566 = STYLED_ITEM('color',(#297567),#113709); +#297567 = PRESENTATION_STYLE_ASSIGNMENT((#297568,#297573)); +#297568 = SURFACE_STYLE_USAGE(.BOTH.,#297569); +#297569 = SURFACE_SIDE_STYLE('',(#297570)); +#297570 = SURFACE_STYLE_FILL_AREA(#297571); +#297571 = FILL_AREA_STYLE('',(#297572)); +#297572 = FILL_AREA_STYLE_COLOUR('',#285989); +#297573 = CURVE_STYLE('',#297574,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297575 = STYLED_ITEM('color',(#297576),#113758); +#297576 = PRESENTATION_STYLE_ASSIGNMENT((#297577,#297582)); +#297577 = SURFACE_STYLE_USAGE(.BOTH.,#297578); +#297578 = SURFACE_SIDE_STYLE('',(#297579)); +#297579 = SURFACE_STYLE_FILL_AREA(#297580); +#297580 = FILL_AREA_STYLE('',(#297581)); +#297581 = FILL_AREA_STYLE_COLOUR('',#285989); +#297582 = CURVE_STYLE('',#297583,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297584 = STYLED_ITEM('color',(#297585),#113782); +#297585 = PRESENTATION_STYLE_ASSIGNMENT((#297586,#297591)); +#297586 = SURFACE_STYLE_USAGE(.BOTH.,#297587); +#297587 = SURFACE_SIDE_STYLE('',(#297588)); +#297588 = SURFACE_STYLE_FILL_AREA(#297589); +#297589 = FILL_AREA_STYLE('',(#297590)); +#297590 = FILL_AREA_STYLE_COLOUR('',#285989); +#297591 = CURVE_STYLE('',#297592,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297593 = STYLED_ITEM('color',(#297594),#113824); +#297594 = PRESENTATION_STYLE_ASSIGNMENT((#297595,#297600)); +#297595 = SURFACE_STYLE_USAGE(.BOTH.,#297596); +#297596 = SURFACE_SIDE_STYLE('',(#297597)); +#297597 = SURFACE_STYLE_FILL_AREA(#297598); +#297598 = FILL_AREA_STYLE('',(#297599)); +#297599 = FILL_AREA_STYLE_COLOUR('',#285989); +#297600 = CURVE_STYLE('',#297601,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297602 = STYLED_ITEM('color',(#297603),#113841); +#297603 = PRESENTATION_STYLE_ASSIGNMENT((#297604,#297609)); +#297604 = SURFACE_STYLE_USAGE(.BOTH.,#297605); +#297605 = SURFACE_SIDE_STYLE('',(#297606)); +#297606 = SURFACE_STYLE_FILL_AREA(#297607); +#297607 = FILL_AREA_STYLE('',(#297608)); +#297608 = FILL_AREA_STYLE_COLOUR('',#270350); +#297609 = CURVE_STYLE('',#297610,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297610 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297611 = OVER_RIDING_STYLED_ITEM('overriding color',(#297612),#113848, + #297602); +#297612 = PRESENTATION_STYLE_ASSIGNMENT((#297613,#297618)); +#297613 = SURFACE_STYLE_USAGE(.BOTH.,#297614); +#297614 = SURFACE_SIDE_STYLE('',(#297615)); +#297615 = SURFACE_STYLE_FILL_AREA(#297616); +#297616 = FILL_AREA_STYLE('',(#297617)); +#297617 = FILL_AREA_STYLE_COLOUR('',#285989); +#297618 = CURVE_STYLE('',#297619,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297619 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297620 = STYLED_ITEM('color',(#297621),#113858); +#297621 = PRESENTATION_STYLE_ASSIGNMENT((#297622,#297627)); +#297622 = SURFACE_STYLE_USAGE(.BOTH.,#297623); +#297623 = SURFACE_SIDE_STYLE('',(#297624)); +#297624 = SURFACE_STYLE_FILL_AREA(#297625); +#297625 = FILL_AREA_STYLE('',(#297626)); +#297626 = FILL_AREA_STYLE_COLOUR('',#270350); +#297627 = CURVE_STYLE('',#297628,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297628 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297629 = OVER_RIDING_STYLED_ITEM('overriding color',(#297630),#113863, + #297620); +#297630 = PRESENTATION_STYLE_ASSIGNMENT((#297631,#297636)); +#297631 = SURFACE_STYLE_USAGE(.BOTH.,#297632); +#297632 = SURFACE_SIDE_STYLE('',(#297633)); +#297633 = SURFACE_STYLE_FILL_AREA(#297634); +#297634 = FILL_AREA_STYLE('',(#297635)); +#297635 = FILL_AREA_STYLE_COLOUR('',#285989); +#297636 = CURVE_STYLE('',#297637,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297637 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297638 = STYLED_ITEM('color',(#297639),#113875); +#297639 = PRESENTATION_STYLE_ASSIGNMENT((#297640,#297645)); +#297640 = SURFACE_STYLE_USAGE(.BOTH.,#297641); +#297641 = SURFACE_SIDE_STYLE('',(#297642)); +#297642 = SURFACE_STYLE_FILL_AREA(#297643); +#297643 = FILL_AREA_STYLE('',(#297644)); +#297644 = FILL_AREA_STYLE_COLOUR('',#285989); +#297645 = CURVE_STYLE('',#297646,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297647 = STYLED_ITEM('color',(#297648),#113924); +#297648 = PRESENTATION_STYLE_ASSIGNMENT((#297649,#297654)); +#297649 = SURFACE_STYLE_USAGE(.BOTH.,#297650); +#297650 = SURFACE_SIDE_STYLE('',(#297651)); +#297651 = SURFACE_STYLE_FILL_AREA(#297652); +#297652 = FILL_AREA_STYLE('',(#297653)); +#297653 = FILL_AREA_STYLE_COLOUR('',#285989); +#297654 = CURVE_STYLE('',#297655,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297655 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297656 = STYLED_ITEM('color',(#297657),#113948); +#297657 = PRESENTATION_STYLE_ASSIGNMENT((#297658,#297663)); +#297658 = SURFACE_STYLE_USAGE(.BOTH.,#297659); +#297659 = SURFACE_SIDE_STYLE('',(#297660)); +#297660 = SURFACE_STYLE_FILL_AREA(#297661); +#297661 = FILL_AREA_STYLE('',(#297662)); +#297662 = FILL_AREA_STYLE_COLOUR('',#285989); +#297663 = CURVE_STYLE('',#297664,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297664 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297665 = STYLED_ITEM('color',(#297666),#113990); +#297666 = PRESENTATION_STYLE_ASSIGNMENT((#297667,#297672)); +#297667 = SURFACE_STYLE_USAGE(.BOTH.,#297668); +#297668 = SURFACE_SIDE_STYLE('',(#297669)); +#297669 = SURFACE_STYLE_FILL_AREA(#297670); +#297670 = FILL_AREA_STYLE('',(#297671)); +#297671 = FILL_AREA_STYLE_COLOUR('',#285989); +#297672 = CURVE_STYLE('',#297673,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297673 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297674 = STYLED_ITEM('color',(#297675),#114007); +#297675 = PRESENTATION_STYLE_ASSIGNMENT((#297676,#297681)); +#297676 = SURFACE_STYLE_USAGE(.BOTH.,#297677); +#297677 = SURFACE_SIDE_STYLE('',(#297678)); +#297678 = SURFACE_STYLE_FILL_AREA(#297679); +#297679 = FILL_AREA_STYLE('',(#297680)); +#297680 = FILL_AREA_STYLE_COLOUR('',#270350); +#297681 = CURVE_STYLE('',#297682,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297682 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297683 = OVER_RIDING_STYLED_ITEM('overriding color',(#297684),#114014, + #297674); +#297684 = PRESENTATION_STYLE_ASSIGNMENT((#297685,#297690)); +#297685 = SURFACE_STYLE_USAGE(.BOTH.,#297686); +#297686 = SURFACE_SIDE_STYLE('',(#297687)); +#297687 = SURFACE_STYLE_FILL_AREA(#297688); +#297688 = FILL_AREA_STYLE('',(#297689)); +#297689 = FILL_AREA_STYLE_COLOUR('',#285989); +#297690 = CURVE_STYLE('',#297691,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297691 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297692 = STYLED_ITEM('color',(#297693),#114024); +#297693 = PRESENTATION_STYLE_ASSIGNMENT((#297694,#297699)); +#297694 = SURFACE_STYLE_USAGE(.BOTH.,#297695); +#297695 = SURFACE_SIDE_STYLE('',(#297696)); +#297696 = SURFACE_STYLE_FILL_AREA(#297697); +#297697 = FILL_AREA_STYLE('',(#297698)); +#297698 = FILL_AREA_STYLE_COLOUR('',#270350); +#297699 = CURVE_STYLE('',#297700,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297700 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297701 = OVER_RIDING_STYLED_ITEM('overriding color',(#297702),#114029, + #297692); +#297702 = PRESENTATION_STYLE_ASSIGNMENT((#297703,#297708)); +#297703 = SURFACE_STYLE_USAGE(.BOTH.,#297704); +#297704 = SURFACE_SIDE_STYLE('',(#297705)); +#297705 = SURFACE_STYLE_FILL_AREA(#297706); +#297706 = FILL_AREA_STYLE('',(#297707)); +#297707 = FILL_AREA_STYLE_COLOUR('',#285989); +#297708 = CURVE_STYLE('',#297709,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297709 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297710 = STYLED_ITEM('color',(#297711),#114041); +#297711 = PRESENTATION_STYLE_ASSIGNMENT((#297712,#297717)); +#297712 = SURFACE_STYLE_USAGE(.BOTH.,#297713); +#297713 = SURFACE_SIDE_STYLE('',(#297714)); +#297714 = SURFACE_STYLE_FILL_AREA(#297715); +#297715 = FILL_AREA_STYLE('',(#297716)); +#297716 = FILL_AREA_STYLE_COLOUR('',#285989); +#297717 = CURVE_STYLE('',#297718,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297718 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297719 = STYLED_ITEM('color',(#297720),#114090); +#297720 = PRESENTATION_STYLE_ASSIGNMENT((#297721,#297726)); +#297721 = SURFACE_STYLE_USAGE(.BOTH.,#297722); +#297722 = SURFACE_SIDE_STYLE('',(#297723)); +#297723 = SURFACE_STYLE_FILL_AREA(#297724); +#297724 = FILL_AREA_STYLE('',(#297725)); +#297725 = FILL_AREA_STYLE_COLOUR('',#285989); +#297726 = CURVE_STYLE('',#297727,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297727 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297728 = STYLED_ITEM('color',(#297729),#114114); +#297729 = PRESENTATION_STYLE_ASSIGNMENT((#297730,#297735)); +#297730 = SURFACE_STYLE_USAGE(.BOTH.,#297731); +#297731 = SURFACE_SIDE_STYLE('',(#297732)); +#297732 = SURFACE_STYLE_FILL_AREA(#297733); +#297733 = FILL_AREA_STYLE('',(#297734)); +#297734 = FILL_AREA_STYLE_COLOUR('',#285989); +#297735 = CURVE_STYLE('',#297736,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297736 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297737 = STYLED_ITEM('color',(#297738),#114156); +#297738 = PRESENTATION_STYLE_ASSIGNMENT((#297739,#297744)); +#297739 = SURFACE_STYLE_USAGE(.BOTH.,#297740); +#297740 = SURFACE_SIDE_STYLE('',(#297741)); +#297741 = SURFACE_STYLE_FILL_AREA(#297742); +#297742 = FILL_AREA_STYLE('',(#297743)); +#297743 = FILL_AREA_STYLE_COLOUR('',#285989); +#297744 = CURVE_STYLE('',#297745,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297745 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297746 = STYLED_ITEM('color',(#297747),#114173); +#297747 = PRESENTATION_STYLE_ASSIGNMENT((#297748,#297753)); +#297748 = SURFACE_STYLE_USAGE(.BOTH.,#297749); +#297749 = SURFACE_SIDE_STYLE('',(#297750)); +#297750 = SURFACE_STYLE_FILL_AREA(#297751); +#297751 = FILL_AREA_STYLE('',(#297752)); +#297752 = FILL_AREA_STYLE_COLOUR('',#270350); +#297753 = CURVE_STYLE('',#297754,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297754 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297755 = OVER_RIDING_STYLED_ITEM('overriding color',(#297756),#114180, + #297746); +#297756 = PRESENTATION_STYLE_ASSIGNMENT((#297757,#297762)); +#297757 = SURFACE_STYLE_USAGE(.BOTH.,#297758); +#297758 = SURFACE_SIDE_STYLE('',(#297759)); +#297759 = SURFACE_STYLE_FILL_AREA(#297760); +#297760 = FILL_AREA_STYLE('',(#297761)); +#297761 = FILL_AREA_STYLE_COLOUR('',#285989); +#297762 = CURVE_STYLE('',#297763,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297763 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297764 = STYLED_ITEM('color',(#297765),#114190); +#297765 = PRESENTATION_STYLE_ASSIGNMENT((#297766,#297771)); +#297766 = SURFACE_STYLE_USAGE(.BOTH.,#297767); +#297767 = SURFACE_SIDE_STYLE('',(#297768)); +#297768 = SURFACE_STYLE_FILL_AREA(#297769); +#297769 = FILL_AREA_STYLE('',(#297770)); +#297770 = FILL_AREA_STYLE_COLOUR('',#270350); +#297771 = CURVE_STYLE('',#297772,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297772 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297773 = OVER_RIDING_STYLED_ITEM('overriding color',(#297774),#114195, + #297764); +#297774 = PRESENTATION_STYLE_ASSIGNMENT((#297775,#297780)); +#297775 = SURFACE_STYLE_USAGE(.BOTH.,#297776); +#297776 = SURFACE_SIDE_STYLE('',(#297777)); +#297777 = SURFACE_STYLE_FILL_AREA(#297778); +#297778 = FILL_AREA_STYLE('',(#297779)); +#297779 = FILL_AREA_STYLE_COLOUR('',#285989); +#297780 = CURVE_STYLE('',#297781,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297781 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297782 = STYLED_ITEM('color',(#297783),#114207); +#297783 = PRESENTATION_STYLE_ASSIGNMENT((#297784,#297789)); +#297784 = SURFACE_STYLE_USAGE(.BOTH.,#297785); +#297785 = SURFACE_SIDE_STYLE('',(#297786)); +#297786 = SURFACE_STYLE_FILL_AREA(#297787); +#297787 = FILL_AREA_STYLE('',(#297788)); +#297788 = FILL_AREA_STYLE_COLOUR('',#285989); +#297789 = CURVE_STYLE('',#297790,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297790 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297791 = STYLED_ITEM('color',(#297792),#114256); +#297792 = PRESENTATION_STYLE_ASSIGNMENT((#297793,#297798)); +#297793 = SURFACE_STYLE_USAGE(.BOTH.,#297794); +#297794 = SURFACE_SIDE_STYLE('',(#297795)); +#297795 = SURFACE_STYLE_FILL_AREA(#297796); +#297796 = FILL_AREA_STYLE('',(#297797)); +#297797 = FILL_AREA_STYLE_COLOUR('',#285989); +#297798 = CURVE_STYLE('',#297799,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297799 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297800 = STYLED_ITEM('color',(#297801),#114280); +#297801 = PRESENTATION_STYLE_ASSIGNMENT((#297802,#297807)); +#297802 = SURFACE_STYLE_USAGE(.BOTH.,#297803); +#297803 = SURFACE_SIDE_STYLE('',(#297804)); +#297804 = SURFACE_STYLE_FILL_AREA(#297805); +#297805 = FILL_AREA_STYLE('',(#297806)); +#297806 = FILL_AREA_STYLE_COLOUR('',#285989); +#297807 = CURVE_STYLE('',#297808,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297808 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297809 = STYLED_ITEM('color',(#297810),#114322); +#297810 = PRESENTATION_STYLE_ASSIGNMENT((#297811,#297816)); +#297811 = SURFACE_STYLE_USAGE(.BOTH.,#297812); +#297812 = SURFACE_SIDE_STYLE('',(#297813)); +#297813 = SURFACE_STYLE_FILL_AREA(#297814); +#297814 = FILL_AREA_STYLE('',(#297815)); +#297815 = FILL_AREA_STYLE_COLOUR('',#285989); +#297816 = CURVE_STYLE('',#297817,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297817 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297818 = STYLED_ITEM('color',(#297819),#114339); +#297819 = PRESENTATION_STYLE_ASSIGNMENT((#297820,#297825)); +#297820 = SURFACE_STYLE_USAGE(.BOTH.,#297821); +#297821 = SURFACE_SIDE_STYLE('',(#297822)); +#297822 = SURFACE_STYLE_FILL_AREA(#297823); +#297823 = FILL_AREA_STYLE('',(#297824)); +#297824 = FILL_AREA_STYLE_COLOUR('',#270350); +#297825 = CURVE_STYLE('',#297826,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297827 = OVER_RIDING_STYLED_ITEM('overriding color',(#297828),#114346, + #297818); +#297828 = PRESENTATION_STYLE_ASSIGNMENT((#297829,#297834)); +#297829 = SURFACE_STYLE_USAGE(.BOTH.,#297830); +#297830 = SURFACE_SIDE_STYLE('',(#297831)); +#297831 = SURFACE_STYLE_FILL_AREA(#297832); +#297832 = FILL_AREA_STYLE('',(#297833)); +#297833 = FILL_AREA_STYLE_COLOUR('',#285989); +#297834 = CURVE_STYLE('',#297835,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297835 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297836 = STYLED_ITEM('color',(#297837),#114356); +#297837 = PRESENTATION_STYLE_ASSIGNMENT((#297838,#297843)); +#297838 = SURFACE_STYLE_USAGE(.BOTH.,#297839); +#297839 = SURFACE_SIDE_STYLE('',(#297840)); +#297840 = SURFACE_STYLE_FILL_AREA(#297841); +#297841 = FILL_AREA_STYLE('',(#297842)); +#297842 = FILL_AREA_STYLE_COLOUR('',#270350); +#297843 = CURVE_STYLE('',#297844,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297844 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297845 = OVER_RIDING_STYLED_ITEM('overriding color',(#297846),#114361, + #297836); +#297846 = PRESENTATION_STYLE_ASSIGNMENT((#297847,#297852)); +#297847 = SURFACE_STYLE_USAGE(.BOTH.,#297848); +#297848 = SURFACE_SIDE_STYLE('',(#297849)); +#297849 = SURFACE_STYLE_FILL_AREA(#297850); +#297850 = FILL_AREA_STYLE('',(#297851)); +#297851 = FILL_AREA_STYLE_COLOUR('',#285989); +#297852 = CURVE_STYLE('',#297853,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297853 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297854 = STYLED_ITEM('color',(#297855),#114373); +#297855 = PRESENTATION_STYLE_ASSIGNMENT((#297856,#297861)); +#297856 = SURFACE_STYLE_USAGE(.BOTH.,#297857); +#297857 = SURFACE_SIDE_STYLE('',(#297858)); +#297858 = SURFACE_STYLE_FILL_AREA(#297859); +#297859 = FILL_AREA_STYLE('',(#297860)); +#297860 = FILL_AREA_STYLE_COLOUR('',#285989); +#297861 = CURVE_STYLE('',#297862,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297862 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297863 = STYLED_ITEM('color',(#297864),#114422); +#297864 = PRESENTATION_STYLE_ASSIGNMENT((#297865,#297870)); +#297865 = SURFACE_STYLE_USAGE(.BOTH.,#297866); +#297866 = SURFACE_SIDE_STYLE('',(#297867)); +#297867 = SURFACE_STYLE_FILL_AREA(#297868); +#297868 = FILL_AREA_STYLE('',(#297869)); +#297869 = FILL_AREA_STYLE_COLOUR('',#285989); +#297870 = CURVE_STYLE('',#297871,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297871 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297872 = STYLED_ITEM('color',(#297873),#114446); +#297873 = PRESENTATION_STYLE_ASSIGNMENT((#297874,#297879)); +#297874 = SURFACE_STYLE_USAGE(.BOTH.,#297875); +#297875 = SURFACE_SIDE_STYLE('',(#297876)); +#297876 = SURFACE_STYLE_FILL_AREA(#297877); +#297877 = FILL_AREA_STYLE('',(#297878)); +#297878 = FILL_AREA_STYLE_COLOUR('',#285989); +#297879 = CURVE_STYLE('',#297880,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297880 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297881 = STYLED_ITEM('color',(#297882),#114488); +#297882 = PRESENTATION_STYLE_ASSIGNMENT((#297883,#297888)); +#297883 = SURFACE_STYLE_USAGE(.BOTH.,#297884); +#297884 = SURFACE_SIDE_STYLE('',(#297885)); +#297885 = SURFACE_STYLE_FILL_AREA(#297886); +#297886 = FILL_AREA_STYLE('',(#297887)); +#297887 = FILL_AREA_STYLE_COLOUR('',#285989); +#297888 = CURVE_STYLE('',#297889,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297889 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297890 = STYLED_ITEM('color',(#297891),#114505); +#297891 = PRESENTATION_STYLE_ASSIGNMENT((#297892,#297897)); +#297892 = SURFACE_STYLE_USAGE(.BOTH.,#297893); +#297893 = SURFACE_SIDE_STYLE('',(#297894)); +#297894 = SURFACE_STYLE_FILL_AREA(#297895); +#297895 = FILL_AREA_STYLE('',(#297896)); +#297896 = FILL_AREA_STYLE_COLOUR('',#270350); +#297897 = CURVE_STYLE('',#297898,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297898 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297899 = OVER_RIDING_STYLED_ITEM('overriding color',(#297900),#114512, + #297890); +#297900 = PRESENTATION_STYLE_ASSIGNMENT((#297901,#297906)); +#297901 = SURFACE_STYLE_USAGE(.BOTH.,#297902); +#297902 = SURFACE_SIDE_STYLE('',(#297903)); +#297903 = SURFACE_STYLE_FILL_AREA(#297904); +#297904 = FILL_AREA_STYLE('',(#297905)); +#297905 = FILL_AREA_STYLE_COLOUR('',#285989); +#297906 = CURVE_STYLE('',#297907,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297907 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297908 = STYLED_ITEM('color',(#297909),#114522); +#297909 = PRESENTATION_STYLE_ASSIGNMENT((#297910,#297915)); +#297910 = SURFACE_STYLE_USAGE(.BOTH.,#297911); +#297911 = SURFACE_SIDE_STYLE('',(#297912)); +#297912 = SURFACE_STYLE_FILL_AREA(#297913); +#297913 = FILL_AREA_STYLE('',(#297914)); +#297914 = FILL_AREA_STYLE_COLOUR('',#270350); +#297915 = CURVE_STYLE('',#297916,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#297916 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297917 = OVER_RIDING_STYLED_ITEM('overriding color',(#297918),#114527, + #297908); +#297918 = PRESENTATION_STYLE_ASSIGNMENT((#297919,#297924)); +#297919 = SURFACE_STYLE_USAGE(.BOTH.,#297920); +#297920 = SURFACE_SIDE_STYLE('',(#297921)); +#297921 = SURFACE_STYLE_FILL_AREA(#297922); +#297922 = FILL_AREA_STYLE('',(#297923)); +#297923 = FILL_AREA_STYLE_COLOUR('',#285989); +#297924 = CURVE_STYLE('',#297925,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297926 = STYLED_ITEM('color',(#297927),#114539); +#297927 = PRESENTATION_STYLE_ASSIGNMENT((#297928,#297933)); +#297928 = SURFACE_STYLE_USAGE(.BOTH.,#297929); +#297929 = SURFACE_SIDE_STYLE('',(#297930)); +#297930 = SURFACE_STYLE_FILL_AREA(#297931); +#297931 = FILL_AREA_STYLE('',(#297932)); +#297932 = FILL_AREA_STYLE_COLOUR('',#285989); +#297933 = CURVE_STYLE('',#297934,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297934 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297935 = STYLED_ITEM('color',(#297936),#114588); +#297936 = PRESENTATION_STYLE_ASSIGNMENT((#297937,#297942)); +#297937 = SURFACE_STYLE_USAGE(.BOTH.,#297938); +#297938 = SURFACE_SIDE_STYLE('',(#297939)); +#297939 = SURFACE_STYLE_FILL_AREA(#297940); +#297940 = FILL_AREA_STYLE('',(#297941)); +#297941 = FILL_AREA_STYLE_COLOUR('',#285989); +#297942 = CURVE_STYLE('',#297943,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297943 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297944 = STYLED_ITEM('color',(#297945),#114612); +#297945 = PRESENTATION_STYLE_ASSIGNMENT((#297946,#297951)); +#297946 = SURFACE_STYLE_USAGE(.BOTH.,#297947); +#297947 = SURFACE_SIDE_STYLE('',(#297948)); +#297948 = SURFACE_STYLE_FILL_AREA(#297949); +#297949 = FILL_AREA_STYLE('',(#297950)); +#297950 = FILL_AREA_STYLE_COLOUR('',#285989); +#297951 = CURVE_STYLE('',#297952,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297952 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297953 = STYLED_ITEM('color',(#297954),#114654); +#297954 = PRESENTATION_STYLE_ASSIGNMENT((#297955,#297960)); +#297955 = SURFACE_STYLE_USAGE(.BOTH.,#297956); +#297956 = SURFACE_SIDE_STYLE('',(#297957)); +#297957 = SURFACE_STYLE_FILL_AREA(#297958); +#297958 = FILL_AREA_STYLE('',(#297959)); +#297959 = FILL_AREA_STYLE_COLOUR('',#285989); +#297960 = CURVE_STYLE('',#297961,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297961 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297962 = STYLED_ITEM('color',(#297963),#114671); +#297963 = PRESENTATION_STYLE_ASSIGNMENT((#297964,#297969)); +#297964 = SURFACE_STYLE_USAGE(.BOTH.,#297965); +#297965 = SURFACE_SIDE_STYLE('',(#297966)); +#297966 = SURFACE_STYLE_FILL_AREA(#297967); +#297967 = FILL_AREA_STYLE('',(#297968)); +#297968 = FILL_AREA_STYLE_COLOUR('',#285989); +#297969 = CURVE_STYLE('',#297970,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297970 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297971 = STYLED_ITEM('color',(#297972),#114688); +#297972 = PRESENTATION_STYLE_ASSIGNMENT((#297973,#297978)); +#297973 = SURFACE_STYLE_USAGE(.BOTH.,#297974); +#297974 = SURFACE_SIDE_STYLE('',(#297975)); +#297975 = SURFACE_STYLE_FILL_AREA(#297976); +#297976 = FILL_AREA_STYLE('',(#297977)); +#297977 = FILL_AREA_STYLE_COLOUR('',#285989); +#297978 = CURVE_STYLE('',#297979,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297980 = STYLED_ITEM('color',(#297981),#114705); +#297981 = PRESENTATION_STYLE_ASSIGNMENT((#297982,#297987)); +#297982 = SURFACE_STYLE_USAGE(.BOTH.,#297983); +#297983 = SURFACE_SIDE_STYLE('',(#297984)); +#297984 = SURFACE_STYLE_FILL_AREA(#297985); +#297985 = FILL_AREA_STYLE('',(#297986)); +#297986 = FILL_AREA_STYLE_COLOUR('',#285989); +#297987 = CURVE_STYLE('',#297988,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297988 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297989 = STYLED_ITEM('color',(#297990),#114717); +#297990 = PRESENTATION_STYLE_ASSIGNMENT((#297991,#297996)); +#297991 = SURFACE_STYLE_USAGE(.BOTH.,#297992); +#297992 = SURFACE_SIDE_STYLE('',(#297993)); +#297993 = SURFACE_STYLE_FILL_AREA(#297994); +#297994 = FILL_AREA_STYLE('',(#297995)); +#297995 = FILL_AREA_STYLE_COLOUR('',#285989); +#297996 = CURVE_STYLE('',#297997,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#297997 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#297998 = STYLED_ITEM('color',(#297999),#114734); +#297999 = PRESENTATION_STYLE_ASSIGNMENT((#298000,#298005)); +#298000 = SURFACE_STYLE_USAGE(.BOTH.,#298001); +#298001 = SURFACE_SIDE_STYLE('',(#298002)); +#298002 = SURFACE_STYLE_FILL_AREA(#298003); +#298003 = FILL_AREA_STYLE('',(#298004)); +#298004 = FILL_AREA_STYLE_COLOUR('',#285989); +#298005 = CURVE_STYLE('',#298006,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298007 = STYLED_ITEM('color',(#298008),#114751); +#298008 = PRESENTATION_STYLE_ASSIGNMENT((#298009,#298014)); +#298009 = SURFACE_STYLE_USAGE(.BOTH.,#298010); +#298010 = SURFACE_SIDE_STYLE('',(#298011)); +#298011 = SURFACE_STYLE_FILL_AREA(#298012); +#298012 = FILL_AREA_STYLE('',(#298013)); +#298013 = FILL_AREA_STYLE_COLOUR('',#285989); +#298014 = CURVE_STYLE('',#298015,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298015 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298016 = STYLED_ITEM('color',(#298017),#114763); +#298017 = PRESENTATION_STYLE_ASSIGNMENT((#298018,#298023)); +#298018 = SURFACE_STYLE_USAGE(.BOTH.,#298019); +#298019 = SURFACE_SIDE_STYLE('',(#298020)); +#298020 = SURFACE_STYLE_FILL_AREA(#298021); +#298021 = FILL_AREA_STYLE('',(#298022)); +#298022 = FILL_AREA_STYLE_COLOUR('',#285989); +#298023 = CURVE_STYLE('',#298024,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298024 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298025 = STYLED_ITEM('color',(#298026),#114780); +#298026 = PRESENTATION_STYLE_ASSIGNMENT((#298027,#298032)); +#298027 = SURFACE_STYLE_USAGE(.BOTH.,#298028); +#298028 = SURFACE_SIDE_STYLE('',(#298029)); +#298029 = SURFACE_STYLE_FILL_AREA(#298030); +#298030 = FILL_AREA_STYLE('',(#298031)); +#298031 = FILL_AREA_STYLE_COLOUR('',#285989); +#298032 = CURVE_STYLE('',#298033,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298034 = STYLED_ITEM('color',(#298035),#114797); +#298035 = PRESENTATION_STYLE_ASSIGNMENT((#298036,#298041)); +#298036 = SURFACE_STYLE_USAGE(.BOTH.,#298037); +#298037 = SURFACE_SIDE_STYLE('',(#298038)); +#298038 = SURFACE_STYLE_FILL_AREA(#298039); +#298039 = FILL_AREA_STYLE('',(#298040)); +#298040 = FILL_AREA_STYLE_COLOUR('',#285989); +#298041 = CURVE_STYLE('',#298042,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298042 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298043 = STYLED_ITEM('color',(#298044),#114809); +#298044 = PRESENTATION_STYLE_ASSIGNMENT((#298045,#298050)); +#298045 = SURFACE_STYLE_USAGE(.BOTH.,#298046); +#298046 = SURFACE_SIDE_STYLE('',(#298047)); +#298047 = SURFACE_STYLE_FILL_AREA(#298048); +#298048 = FILL_AREA_STYLE('',(#298049)); +#298049 = FILL_AREA_STYLE_COLOUR('',#285989); +#298050 = CURVE_STYLE('',#298051,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298051 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298052 = STYLED_ITEM('color',(#298053),#114826); +#298053 = PRESENTATION_STYLE_ASSIGNMENT((#298054,#298059)); +#298054 = SURFACE_STYLE_USAGE(.BOTH.,#298055); +#298055 = SURFACE_SIDE_STYLE('',(#298056)); +#298056 = SURFACE_STYLE_FILL_AREA(#298057); +#298057 = FILL_AREA_STYLE('',(#298058)); +#298058 = FILL_AREA_STYLE_COLOUR('',#285989); +#298059 = CURVE_STYLE('',#298060,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298060 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298061 = STYLED_ITEM('color',(#298062),#114843); +#298062 = PRESENTATION_STYLE_ASSIGNMENT((#298063,#298068)); +#298063 = SURFACE_STYLE_USAGE(.BOTH.,#298064); +#298064 = SURFACE_SIDE_STYLE('',(#298065)); +#298065 = SURFACE_STYLE_FILL_AREA(#298066); +#298066 = FILL_AREA_STYLE('',(#298067)); +#298067 = FILL_AREA_STYLE_COLOUR('',#285989); +#298068 = CURVE_STYLE('',#298069,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298069 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298070 = STYLED_ITEM('color',(#298071),#114855); +#298071 = PRESENTATION_STYLE_ASSIGNMENT((#298072,#298077)); +#298072 = SURFACE_STYLE_USAGE(.BOTH.,#298073); +#298073 = SURFACE_SIDE_STYLE('',(#298074)); +#298074 = SURFACE_STYLE_FILL_AREA(#298075); +#298075 = FILL_AREA_STYLE('',(#298076)); +#298076 = FILL_AREA_STYLE_COLOUR('',#285989); +#298077 = CURVE_STYLE('',#298078,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298078 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298079 = STYLED_ITEM('color',(#298080),#114872); +#298080 = PRESENTATION_STYLE_ASSIGNMENT((#298081,#298086)); +#298081 = SURFACE_STYLE_USAGE(.BOTH.,#298082); +#298082 = SURFACE_SIDE_STYLE('',(#298083)); +#298083 = SURFACE_STYLE_FILL_AREA(#298084); +#298084 = FILL_AREA_STYLE('',(#298085)); +#298085 = FILL_AREA_STYLE_COLOUR('',#285989); +#298086 = CURVE_STYLE('',#298087,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298087 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298088 = STYLED_ITEM('color',(#298089),#114889); +#298089 = PRESENTATION_STYLE_ASSIGNMENT((#298090,#298095)); +#298090 = SURFACE_STYLE_USAGE(.BOTH.,#298091); +#298091 = SURFACE_SIDE_STYLE('',(#298092)); +#298092 = SURFACE_STYLE_FILL_AREA(#298093); +#298093 = FILL_AREA_STYLE('',(#298094)); +#298094 = FILL_AREA_STYLE_COLOUR('',#285989); +#298095 = CURVE_STYLE('',#298096,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298096 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298097 = STYLED_ITEM('color',(#298098),#114901); +#298098 = PRESENTATION_STYLE_ASSIGNMENT((#298099,#298104)); +#298099 = SURFACE_STYLE_USAGE(.BOTH.,#298100); +#298100 = SURFACE_SIDE_STYLE('',(#298101)); +#298101 = SURFACE_STYLE_FILL_AREA(#298102); +#298102 = FILL_AREA_STYLE('',(#298103)); +#298103 = FILL_AREA_STYLE_COLOUR('',#285989); +#298104 = CURVE_STYLE('',#298105,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298105 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298106 = STYLED_ITEM('color',(#298107),#114918); +#298107 = PRESENTATION_STYLE_ASSIGNMENT((#298108,#298113)); +#298108 = SURFACE_STYLE_USAGE(.BOTH.,#298109); +#298109 = SURFACE_SIDE_STYLE('',(#298110)); +#298110 = SURFACE_STYLE_FILL_AREA(#298111); +#298111 = FILL_AREA_STYLE('',(#298112)); +#298112 = FILL_AREA_STYLE_COLOUR('',#285989); +#298113 = CURVE_STYLE('',#298114,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298114 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298115 = STYLED_ITEM('color',(#298116),#114935); +#298116 = PRESENTATION_STYLE_ASSIGNMENT((#298117,#298122)); +#298117 = SURFACE_STYLE_USAGE(.BOTH.,#298118); +#298118 = SURFACE_SIDE_STYLE('',(#298119)); +#298119 = SURFACE_STYLE_FILL_AREA(#298120); +#298120 = FILL_AREA_STYLE('',(#298121)); +#298121 = FILL_AREA_STYLE_COLOUR('',#285989); +#298122 = CURVE_STYLE('',#298123,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#298123 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298124 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #298125,#298135,#298144,#298153,#298162,#298171,#298180,#298189, + #298198,#298207,#298216,#298225,#298234,#298243,#298252,#298261, + #298270,#298279,#298288,#298297,#298306,#298315,#298324,#298333, + #298342,#298351,#298360,#298369,#298378,#298387,#298396,#298405, + #298414,#298423,#298432,#298441,#298450,#298459,#298468,#298477, + #298486,#298495,#298504,#298513,#298522,#298531,#298540,#298549, + #298558,#298567,#298576,#298585,#298594,#298603,#298612,#298621, + #298630,#298639,#298648,#298657,#298666,#298675,#298684,#298693, + #298702,#298711,#298720,#298729,#298738,#298747,#298756,#298765, + #298774,#298783,#298792,#298801,#298810,#298819,#298828,#298837, + #298846,#298855,#298864,#298873,#298882,#298891,#298900,#298909, + #298918,#298927,#298936,#298945,#298954,#298963,#298972,#298981, + #298990,#298999,#299008,#299017,#299026,#299035,#299044,#299053, + #299062,#299071,#299080,#299089,#299098,#299107,#299116,#299125, + #299134,#299143,#299152,#299161,#299170,#299179,#299188,#299197, + #299206,#299215,#299224,#299233,#299242,#299251,#299260,#299269, + #299278,#299287,#299296,#299305,#299314,#299323,#299332,#299341, + #299350,#299359,#299368,#299377,#299386,#299395,#299404,#299413, + #299422,#299431,#299440,#299449,#299458,#299467,#299476,#299485, + #299494,#299503,#299512,#299521,#299530,#299539,#299548,#299557, + #299566,#299575,#299584,#299593,#299602,#299611,#299620,#299629, + #299638,#299647,#299656,#299665,#299674,#299683,#299692,#299701, + #299710,#299719,#299728,#299737,#299746,#299755,#299764,#299773, + #299782,#299791,#299800,#299809,#299818,#299827,#299836,#299845, + #299854,#299863,#299872,#299881,#299890,#299899,#299908,#299917, + #299926,#299935,#299944,#299953,#299962,#299971,#299980,#299989, + #299998,#300007,#300016,#300025,#300034,#300043,#300052,#300061, + #300070),#87098); +#298125 = STYLED_ITEM('color',(#298126),#81317); +#298126 = PRESENTATION_STYLE_ASSIGNMENT((#298127,#298133)); +#298127 = SURFACE_STYLE_USAGE(.BOTH.,#298128); +#298128 = SURFACE_SIDE_STYLE('',(#298129)); +#298129 = SURFACE_STYLE_FILL_AREA(#298130); +#298130 = FILL_AREA_STYLE('',(#298131)); +#298131 = FILL_AREA_STYLE_COLOUR('',#298132); +#298132 = COLOUR_RGB('',0.340000006699,0.68000001254,0.444999988852); +#298133 = CURVE_STYLE('',#298134,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298134 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298135 = OVER_RIDING_STYLED_ITEM('overriding color',(#298136),#81419, + #298125); +#298136 = PRESENTATION_STYLE_ASSIGNMENT((#298137,#298142)); +#298137 = SURFACE_STYLE_USAGE(.BOTH.,#298138); +#298138 = SURFACE_SIDE_STYLE('',(#298139)); +#298139 = SURFACE_STYLE_FILL_AREA(#298140); +#298140 = FILL_AREA_STYLE('',(#298141)); +#298141 = FILL_AREA_STYLE_COLOUR('',#270441); +#298142 = CURVE_STYLE('',#298143,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298143 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298144 = OVER_RIDING_STYLED_ITEM('overriding color',(#298145),#81429, + #298125); +#298145 = PRESENTATION_STYLE_ASSIGNMENT((#298146,#298151)); +#298146 = SURFACE_STYLE_USAGE(.BOTH.,#298147); +#298147 = SURFACE_SIDE_STYLE('',(#298148)); +#298148 = SURFACE_STYLE_FILL_AREA(#298149); +#298149 = FILL_AREA_STYLE('',(#298150)); +#298150 = FILL_AREA_STYLE_COLOUR('',#270441); +#298151 = CURVE_STYLE('',#298152,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298152 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298153 = OVER_RIDING_STYLED_ITEM('overriding color',(#298154),#81437, + #298125); +#298154 = PRESENTATION_STYLE_ASSIGNMENT((#298155,#298160)); +#298155 = SURFACE_STYLE_USAGE(.BOTH.,#298156); +#298156 = SURFACE_SIDE_STYLE('',(#298157)); +#298157 = SURFACE_STYLE_FILL_AREA(#298158); +#298158 = FILL_AREA_STYLE('',(#298159)); +#298159 = FILL_AREA_STYLE_COLOUR('',#270441); +#298160 = CURVE_STYLE('',#298161,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298161 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298162 = OVER_RIDING_STYLED_ITEM('overriding color',(#298163),#81445, + #298125); +#298163 = PRESENTATION_STYLE_ASSIGNMENT((#298164,#298169)); +#298164 = SURFACE_STYLE_USAGE(.BOTH.,#298165); +#298165 = SURFACE_SIDE_STYLE('',(#298166)); +#298166 = SURFACE_STYLE_FILL_AREA(#298167); +#298167 = FILL_AREA_STYLE('',(#298168)); +#298168 = FILL_AREA_STYLE_COLOUR('',#270441); +#298169 = CURVE_STYLE('',#298170,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298170 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298171 = OVER_RIDING_STYLED_ITEM('overriding color',(#298172),#81453, + #298125); +#298172 = PRESENTATION_STYLE_ASSIGNMENT((#298173,#298178)); +#298173 = SURFACE_STYLE_USAGE(.BOTH.,#298174); +#298174 = SURFACE_SIDE_STYLE('',(#298175)); +#298175 = SURFACE_STYLE_FILL_AREA(#298176); +#298176 = FILL_AREA_STYLE('',(#298177)); +#298177 = FILL_AREA_STYLE_COLOUR('',#270441); +#298178 = CURVE_STYLE('',#298179,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298179 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298180 = OVER_RIDING_STYLED_ITEM('overriding color',(#298181),#81463, + #298125); +#298181 = PRESENTATION_STYLE_ASSIGNMENT((#298182,#298187)); +#298182 = SURFACE_STYLE_USAGE(.BOTH.,#298183); +#298183 = SURFACE_SIDE_STYLE('',(#298184)); +#298184 = SURFACE_STYLE_FILL_AREA(#298185); +#298185 = FILL_AREA_STYLE('',(#298186)); +#298186 = FILL_AREA_STYLE_COLOUR('',#270441); +#298187 = CURVE_STYLE('',#298188,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298188 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298189 = OVER_RIDING_STYLED_ITEM('overriding color',(#298190),#81471, + #298125); +#298190 = PRESENTATION_STYLE_ASSIGNMENT((#298191,#298196)); +#298191 = SURFACE_STYLE_USAGE(.BOTH.,#298192); +#298192 = SURFACE_SIDE_STYLE('',(#298193)); +#298193 = SURFACE_STYLE_FILL_AREA(#298194); +#298194 = FILL_AREA_STYLE('',(#298195)); +#298195 = FILL_AREA_STYLE_COLOUR('',#270441); +#298196 = CURVE_STYLE('',#298197,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298197 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298198 = OVER_RIDING_STYLED_ITEM('overriding color',(#298199),#81479, + #298125); +#298199 = PRESENTATION_STYLE_ASSIGNMENT((#298200,#298205)); +#298200 = SURFACE_STYLE_USAGE(.BOTH.,#298201); +#298201 = SURFACE_SIDE_STYLE('',(#298202)); +#298202 = SURFACE_STYLE_FILL_AREA(#298203); +#298203 = FILL_AREA_STYLE('',(#298204)); +#298204 = FILL_AREA_STYLE_COLOUR('',#270441); +#298205 = CURVE_STYLE('',#298206,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298206 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298207 = OVER_RIDING_STYLED_ITEM('overriding color',(#298208),#81487, + #298125); +#298208 = PRESENTATION_STYLE_ASSIGNMENT((#298209,#298214)); +#298209 = SURFACE_STYLE_USAGE(.BOTH.,#298210); +#298210 = SURFACE_SIDE_STYLE('',(#298211)); +#298211 = SURFACE_STYLE_FILL_AREA(#298212); +#298212 = FILL_AREA_STYLE('',(#298213)); +#298213 = FILL_AREA_STYLE_COLOUR('',#270441); +#298214 = CURVE_STYLE('',#298215,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298215 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298216 = OVER_RIDING_STYLED_ITEM('overriding color',(#298217),#81497, + #298125); +#298217 = PRESENTATION_STYLE_ASSIGNMENT((#298218,#298223)); +#298218 = SURFACE_STYLE_USAGE(.BOTH.,#298219); +#298219 = SURFACE_SIDE_STYLE('',(#298220)); +#298220 = SURFACE_STYLE_FILL_AREA(#298221); +#298221 = FILL_AREA_STYLE('',(#298222)); +#298222 = FILL_AREA_STYLE_COLOUR('',#270441); +#298223 = CURVE_STYLE('',#298224,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298224 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298225 = OVER_RIDING_STYLED_ITEM('overriding color',(#298226),#81505, + #298125); +#298226 = PRESENTATION_STYLE_ASSIGNMENT((#298227,#298232)); +#298227 = SURFACE_STYLE_USAGE(.BOTH.,#298228); +#298228 = SURFACE_SIDE_STYLE('',(#298229)); +#298229 = SURFACE_STYLE_FILL_AREA(#298230); +#298230 = FILL_AREA_STYLE('',(#298231)); +#298231 = FILL_AREA_STYLE_COLOUR('',#270441); +#298232 = CURVE_STYLE('',#298233,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298233 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298234 = OVER_RIDING_STYLED_ITEM('overriding color',(#298235),#81513, + #298125); +#298235 = PRESENTATION_STYLE_ASSIGNMENT((#298236,#298241)); +#298236 = SURFACE_STYLE_USAGE(.BOTH.,#298237); +#298237 = SURFACE_SIDE_STYLE('',(#298238)); +#298238 = SURFACE_STYLE_FILL_AREA(#298239); +#298239 = FILL_AREA_STYLE('',(#298240)); +#298240 = FILL_AREA_STYLE_COLOUR('',#270441); +#298241 = CURVE_STYLE('',#298242,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298242 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298243 = OVER_RIDING_STYLED_ITEM('overriding color',(#298244),#81521, + #298125); +#298244 = PRESENTATION_STYLE_ASSIGNMENT((#298245,#298250)); +#298245 = SURFACE_STYLE_USAGE(.BOTH.,#298246); +#298246 = SURFACE_SIDE_STYLE('',(#298247)); +#298247 = SURFACE_STYLE_FILL_AREA(#298248); +#298248 = FILL_AREA_STYLE('',(#298249)); +#298249 = FILL_AREA_STYLE_COLOUR('',#270441); +#298250 = CURVE_STYLE('',#298251,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298251 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298252 = OVER_RIDING_STYLED_ITEM('overriding color',(#298253),#81531, + #298125); +#298253 = PRESENTATION_STYLE_ASSIGNMENT((#298254,#298259)); +#298254 = SURFACE_STYLE_USAGE(.BOTH.,#298255); +#298255 = SURFACE_SIDE_STYLE('',(#298256)); +#298256 = SURFACE_STYLE_FILL_AREA(#298257); +#298257 = FILL_AREA_STYLE('',(#298258)); +#298258 = FILL_AREA_STYLE_COLOUR('',#270441); +#298259 = CURVE_STYLE('',#298260,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298260 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298261 = OVER_RIDING_STYLED_ITEM('overriding color',(#298262),#81539, + #298125); +#298262 = PRESENTATION_STYLE_ASSIGNMENT((#298263,#298268)); +#298263 = SURFACE_STYLE_USAGE(.BOTH.,#298264); +#298264 = SURFACE_SIDE_STYLE('',(#298265)); +#298265 = SURFACE_STYLE_FILL_AREA(#298266); +#298266 = FILL_AREA_STYLE('',(#298267)); +#298267 = FILL_AREA_STYLE_COLOUR('',#270441); +#298268 = CURVE_STYLE('',#298269,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298269 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298270 = OVER_RIDING_STYLED_ITEM('overriding color',(#298271),#81547, + #298125); +#298271 = PRESENTATION_STYLE_ASSIGNMENT((#298272,#298277)); +#298272 = SURFACE_STYLE_USAGE(.BOTH.,#298273); +#298273 = SURFACE_SIDE_STYLE('',(#298274)); +#298274 = SURFACE_STYLE_FILL_AREA(#298275); +#298275 = FILL_AREA_STYLE('',(#298276)); +#298276 = FILL_AREA_STYLE_COLOUR('',#270441); +#298277 = CURVE_STYLE('',#298278,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298278 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298279 = OVER_RIDING_STYLED_ITEM('overriding color',(#298280),#81555, + #298125); +#298280 = PRESENTATION_STYLE_ASSIGNMENT((#298281,#298286)); +#298281 = SURFACE_STYLE_USAGE(.BOTH.,#298282); +#298282 = SURFACE_SIDE_STYLE('',(#298283)); +#298283 = SURFACE_STYLE_FILL_AREA(#298284); +#298284 = FILL_AREA_STYLE('',(#298285)); +#298285 = FILL_AREA_STYLE_COLOUR('',#270441); +#298286 = CURVE_STYLE('',#298287,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298287 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298288 = OVER_RIDING_STYLED_ITEM('overriding color',(#298289),#81565, + #298125); +#298289 = PRESENTATION_STYLE_ASSIGNMENT((#298290,#298295)); +#298290 = SURFACE_STYLE_USAGE(.BOTH.,#298291); +#298291 = SURFACE_SIDE_STYLE('',(#298292)); +#298292 = SURFACE_STYLE_FILL_AREA(#298293); +#298293 = FILL_AREA_STYLE('',(#298294)); +#298294 = FILL_AREA_STYLE_COLOUR('',#270441); +#298295 = CURVE_STYLE('',#298296,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298296 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298297 = OVER_RIDING_STYLED_ITEM('overriding color',(#298298),#81573, + #298125); +#298298 = PRESENTATION_STYLE_ASSIGNMENT((#298299,#298304)); +#298299 = SURFACE_STYLE_USAGE(.BOTH.,#298300); +#298300 = SURFACE_SIDE_STYLE('',(#298301)); +#298301 = SURFACE_STYLE_FILL_AREA(#298302); +#298302 = FILL_AREA_STYLE('',(#298303)); +#298303 = FILL_AREA_STYLE_COLOUR('',#270441); +#298304 = CURVE_STYLE('',#298305,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298305 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298306 = OVER_RIDING_STYLED_ITEM('overriding color',(#298307),#81581, + #298125); +#298307 = PRESENTATION_STYLE_ASSIGNMENT((#298308,#298313)); +#298308 = SURFACE_STYLE_USAGE(.BOTH.,#298309); +#298309 = SURFACE_SIDE_STYLE('',(#298310)); +#298310 = SURFACE_STYLE_FILL_AREA(#298311); +#298311 = FILL_AREA_STYLE('',(#298312)); +#298312 = FILL_AREA_STYLE_COLOUR('',#270441); +#298313 = CURVE_STYLE('',#298314,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298314 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298315 = STYLED_ITEM('color',(#298316),#81591); +#298316 = PRESENTATION_STYLE_ASSIGNMENT((#298317,#298322)); +#298317 = SURFACE_STYLE_USAGE(.BOTH.,#298318); +#298318 = SURFACE_SIDE_STYLE('',(#298319)); +#298319 = SURFACE_STYLE_FILL_AREA(#298320); +#298320 = FILL_AREA_STYLE('',(#298321)); +#298321 = FILL_AREA_STYLE_COLOUR('',#298132); +#298322 = CURVE_STYLE('',#298323,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298323 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298324 = STYLED_ITEM('color',(#298325),#81669); +#298325 = PRESENTATION_STYLE_ASSIGNMENT((#298326,#298331)); +#298326 = SURFACE_STYLE_USAGE(.BOTH.,#298327); +#298327 = SURFACE_SIDE_STYLE('',(#298328)); +#298328 = SURFACE_STYLE_FILL_AREA(#298329); +#298329 = FILL_AREA_STYLE('',(#298330)); +#298330 = FILL_AREA_STYLE_COLOUR('',#298132); +#298331 = CURVE_STYLE('',#298332,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298332 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298333 = STYLED_ITEM('color',(#298334),#81863); +#298334 = PRESENTATION_STYLE_ASSIGNMENT((#298335,#298340)); +#298335 = SURFACE_STYLE_USAGE(.BOTH.,#298336); +#298336 = SURFACE_SIDE_STYLE('',(#298337)); +#298337 = SURFACE_STYLE_FILL_AREA(#298338); +#298338 = FILL_AREA_STYLE('',(#298339)); +#298339 = FILL_AREA_STYLE_COLOUR('',#298132); +#298340 = CURVE_STYLE('',#298341,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298341 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298342 = STYLED_ITEM('color',(#298343),#81887); +#298343 = PRESENTATION_STYLE_ASSIGNMENT((#298344,#298349)); +#298344 = SURFACE_STYLE_USAGE(.BOTH.,#298345); +#298345 = SURFACE_SIDE_STYLE('',(#298346)); +#298346 = SURFACE_STYLE_FILL_AREA(#298347); +#298347 = FILL_AREA_STYLE('',(#298348)); +#298348 = FILL_AREA_STYLE_COLOUR('',#298132); +#298349 = CURVE_STYLE('',#298350,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298350 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298351 = STYLED_ITEM('color',(#298352),#81958); +#298352 = PRESENTATION_STYLE_ASSIGNMENT((#298353,#298358)); +#298353 = SURFACE_STYLE_USAGE(.BOTH.,#298354); +#298354 = SURFACE_SIDE_STYLE('',(#298355)); +#298355 = SURFACE_STYLE_FILL_AREA(#298356); +#298356 = FILL_AREA_STYLE('',(#298357)); +#298357 = FILL_AREA_STYLE_COLOUR('',#298132); +#298358 = CURVE_STYLE('',#298359,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298359 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298360 = STYLED_ITEM('color',(#298361),#81982); +#298361 = PRESENTATION_STYLE_ASSIGNMENT((#298362,#298367)); +#298362 = SURFACE_STYLE_USAGE(.BOTH.,#298363); +#298363 = SURFACE_SIDE_STYLE('',(#298364)); +#298364 = SURFACE_STYLE_FILL_AREA(#298365); +#298365 = FILL_AREA_STYLE('',(#298366)); +#298366 = FILL_AREA_STYLE_COLOUR('',#298132); +#298367 = CURVE_STYLE('',#298368,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298368 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298369 = STYLED_ITEM('color',(#298370),#82006); +#298370 = PRESENTATION_STYLE_ASSIGNMENT((#298371,#298376)); +#298371 = SURFACE_STYLE_USAGE(.BOTH.,#298372); +#298372 = SURFACE_SIDE_STYLE('',(#298373)); +#298373 = SURFACE_STYLE_FILL_AREA(#298374); +#298374 = FILL_AREA_STYLE('',(#298375)); +#298375 = FILL_AREA_STYLE_COLOUR('',#298132); +#298376 = CURVE_STYLE('',#298377,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298377 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298378 = STYLED_ITEM('color',(#298379),#82023); +#298379 = PRESENTATION_STYLE_ASSIGNMENT((#298380,#298385)); +#298380 = SURFACE_STYLE_USAGE(.BOTH.,#298381); +#298381 = SURFACE_SIDE_STYLE('',(#298382)); +#298382 = SURFACE_STYLE_FILL_AREA(#298383); +#298383 = FILL_AREA_STYLE('',(#298384)); +#298384 = FILL_AREA_STYLE_COLOUR('',#298132); +#298385 = CURVE_STYLE('',#298386,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298386 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298387 = STYLED_ITEM('color',(#298388),#82047); +#298388 = PRESENTATION_STYLE_ASSIGNMENT((#298389,#298394)); +#298389 = SURFACE_STYLE_USAGE(.BOTH.,#298390); +#298390 = SURFACE_SIDE_STYLE('',(#298391)); +#298391 = SURFACE_STYLE_FILL_AREA(#298392); +#298392 = FILL_AREA_STYLE('',(#298393)); +#298393 = FILL_AREA_STYLE_COLOUR('',#298132); +#298394 = CURVE_STYLE('',#298395,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298395 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298396 = STYLED_ITEM('color',(#298397),#82064); +#298397 = PRESENTATION_STYLE_ASSIGNMENT((#298398,#298403)); +#298398 = SURFACE_STYLE_USAGE(.BOTH.,#298399); +#298399 = SURFACE_SIDE_STYLE('',(#298400)); +#298400 = SURFACE_STYLE_FILL_AREA(#298401); +#298401 = FILL_AREA_STYLE('',(#298402)); +#298402 = FILL_AREA_STYLE_COLOUR('',#298132); +#298403 = CURVE_STYLE('',#298404,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298404 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298405 = STYLED_ITEM('color',(#298406),#82081); +#298406 = PRESENTATION_STYLE_ASSIGNMENT((#298407,#298412)); +#298407 = SURFACE_STYLE_USAGE(.BOTH.,#298408); +#298408 = SURFACE_SIDE_STYLE('',(#298409)); +#298409 = SURFACE_STYLE_FILL_AREA(#298410); +#298410 = FILL_AREA_STYLE('',(#298411)); +#298411 = FILL_AREA_STYLE_COLOUR('',#270441); +#298412 = CURVE_STYLE('',#298413,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298413 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298414 = STYLED_ITEM('color',(#298415),#82112); +#298415 = PRESENTATION_STYLE_ASSIGNMENT((#298416,#298421)); +#298416 = SURFACE_STYLE_USAGE(.BOTH.,#298417); +#298417 = SURFACE_SIDE_STYLE('',(#298418)); +#298418 = SURFACE_STYLE_FILL_AREA(#298419); +#298419 = FILL_AREA_STYLE('',(#298420)); +#298420 = FILL_AREA_STYLE_COLOUR('',#270441); +#298421 = CURVE_STYLE('',#298422,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298422 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298423 = STYLED_ITEM('color',(#298424),#82136); +#298424 = PRESENTATION_STYLE_ASSIGNMENT((#298425,#298430)); +#298425 = SURFACE_STYLE_USAGE(.BOTH.,#298426); +#298426 = SURFACE_SIDE_STYLE('',(#298427)); +#298427 = SURFACE_STYLE_FILL_AREA(#298428); +#298428 = FILL_AREA_STYLE('',(#298429)); +#298429 = FILL_AREA_STYLE_COLOUR('',#270441); +#298430 = CURVE_STYLE('',#298431,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298431 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298432 = STYLED_ITEM('color',(#298433),#82160); +#298433 = PRESENTATION_STYLE_ASSIGNMENT((#298434,#298439)); +#298434 = SURFACE_STYLE_USAGE(.BOTH.,#298435); +#298435 = SURFACE_SIDE_STYLE('',(#298436)); +#298436 = SURFACE_STYLE_FILL_AREA(#298437); +#298437 = FILL_AREA_STYLE('',(#298438)); +#298438 = FILL_AREA_STYLE_COLOUR('',#270441); +#298439 = CURVE_STYLE('',#298440,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298440 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298441 = STYLED_ITEM('color',(#298442),#82177); +#298442 = PRESENTATION_STYLE_ASSIGNMENT((#298443,#298448)); +#298443 = SURFACE_STYLE_USAGE(.BOTH.,#298444); +#298444 = SURFACE_SIDE_STYLE('',(#298445)); +#298445 = SURFACE_STYLE_FILL_AREA(#298446); +#298446 = FILL_AREA_STYLE('',(#298447)); +#298447 = FILL_AREA_STYLE_COLOUR('',#270441); +#298448 = CURVE_STYLE('',#298449,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298449 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298450 = STYLED_ITEM('color',(#298451),#82208); +#298451 = PRESENTATION_STYLE_ASSIGNMENT((#298452,#298457)); +#298452 = SURFACE_STYLE_USAGE(.BOTH.,#298453); +#298453 = SURFACE_SIDE_STYLE('',(#298454)); +#298454 = SURFACE_STYLE_FILL_AREA(#298455); +#298455 = FILL_AREA_STYLE('',(#298456)); +#298456 = FILL_AREA_STYLE_COLOUR('',#270441); +#298457 = CURVE_STYLE('',#298458,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298458 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298459 = STYLED_ITEM('color',(#298460),#82232); +#298460 = PRESENTATION_STYLE_ASSIGNMENT((#298461,#298466)); +#298461 = SURFACE_STYLE_USAGE(.BOTH.,#298462); +#298462 = SURFACE_SIDE_STYLE('',(#298463)); +#298463 = SURFACE_STYLE_FILL_AREA(#298464); +#298464 = FILL_AREA_STYLE('',(#298465)); +#298465 = FILL_AREA_STYLE_COLOUR('',#270441); +#298466 = CURVE_STYLE('',#298467,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298467 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298468 = STYLED_ITEM('color',(#298469),#82256); +#298469 = PRESENTATION_STYLE_ASSIGNMENT((#298470,#298475)); +#298470 = SURFACE_STYLE_USAGE(.BOTH.,#298471); +#298471 = SURFACE_SIDE_STYLE('',(#298472)); +#298472 = SURFACE_STYLE_FILL_AREA(#298473); +#298473 = FILL_AREA_STYLE('',(#298474)); +#298474 = FILL_AREA_STYLE_COLOUR('',#270441); +#298475 = CURVE_STYLE('',#298476,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298476 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298477 = STYLED_ITEM('color',(#298478),#82273); +#298478 = PRESENTATION_STYLE_ASSIGNMENT((#298479,#298484)); +#298479 = SURFACE_STYLE_USAGE(.BOTH.,#298480); +#298480 = SURFACE_SIDE_STYLE('',(#298481)); +#298481 = SURFACE_STYLE_FILL_AREA(#298482); +#298482 = FILL_AREA_STYLE('',(#298483)); +#298483 = FILL_AREA_STYLE_COLOUR('',#270441); +#298484 = CURVE_STYLE('',#298485,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298485 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298486 = STYLED_ITEM('color',(#298487),#82304); +#298487 = PRESENTATION_STYLE_ASSIGNMENT((#298488,#298493)); +#298488 = SURFACE_STYLE_USAGE(.BOTH.,#298489); +#298489 = SURFACE_SIDE_STYLE('',(#298490)); +#298490 = SURFACE_STYLE_FILL_AREA(#298491); +#298491 = FILL_AREA_STYLE('',(#298492)); +#298492 = FILL_AREA_STYLE_COLOUR('',#270441); +#298493 = CURVE_STYLE('',#298494,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298494 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298495 = STYLED_ITEM('color',(#298496),#82328); +#298496 = PRESENTATION_STYLE_ASSIGNMENT((#298497,#298502)); +#298497 = SURFACE_STYLE_USAGE(.BOTH.,#298498); +#298498 = SURFACE_SIDE_STYLE('',(#298499)); +#298499 = SURFACE_STYLE_FILL_AREA(#298500); +#298500 = FILL_AREA_STYLE('',(#298501)); +#298501 = FILL_AREA_STYLE_COLOUR('',#270441); +#298502 = CURVE_STYLE('',#298503,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298504 = STYLED_ITEM('color',(#298505),#82352); +#298505 = PRESENTATION_STYLE_ASSIGNMENT((#298506,#298511)); +#298506 = SURFACE_STYLE_USAGE(.BOTH.,#298507); +#298507 = SURFACE_SIDE_STYLE('',(#298508)); +#298508 = SURFACE_STYLE_FILL_AREA(#298509); +#298509 = FILL_AREA_STYLE('',(#298510)); +#298510 = FILL_AREA_STYLE_COLOUR('',#270441); +#298511 = CURVE_STYLE('',#298512,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298513 = STYLED_ITEM('color',(#298514),#82369); +#298514 = PRESENTATION_STYLE_ASSIGNMENT((#298515,#298520)); +#298515 = SURFACE_STYLE_USAGE(.BOTH.,#298516); +#298516 = SURFACE_SIDE_STYLE('',(#298517)); +#298517 = SURFACE_STYLE_FILL_AREA(#298518); +#298518 = FILL_AREA_STYLE('',(#298519)); +#298519 = FILL_AREA_STYLE_COLOUR('',#270441); +#298520 = CURVE_STYLE('',#298521,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298522 = STYLED_ITEM('color',(#298523),#82400); +#298523 = PRESENTATION_STYLE_ASSIGNMENT((#298524,#298529)); +#298524 = SURFACE_STYLE_USAGE(.BOTH.,#298525); +#298525 = SURFACE_SIDE_STYLE('',(#298526)); +#298526 = SURFACE_STYLE_FILL_AREA(#298527); +#298527 = FILL_AREA_STYLE('',(#298528)); +#298528 = FILL_AREA_STYLE_COLOUR('',#270441); +#298529 = CURVE_STYLE('',#298530,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298531 = STYLED_ITEM('color',(#298532),#82424); +#298532 = PRESENTATION_STYLE_ASSIGNMENT((#298533,#298538)); +#298533 = SURFACE_STYLE_USAGE(.BOTH.,#298534); +#298534 = SURFACE_SIDE_STYLE('',(#298535)); +#298535 = SURFACE_STYLE_FILL_AREA(#298536); +#298536 = FILL_AREA_STYLE('',(#298537)); +#298537 = FILL_AREA_STYLE_COLOUR('',#270441); +#298538 = CURVE_STYLE('',#298539,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298539 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298540 = STYLED_ITEM('color',(#298541),#82448); +#298541 = PRESENTATION_STYLE_ASSIGNMENT((#298542,#298547)); +#298542 = SURFACE_STYLE_USAGE(.BOTH.,#298543); +#298543 = SURFACE_SIDE_STYLE('',(#298544)); +#298544 = SURFACE_STYLE_FILL_AREA(#298545); +#298545 = FILL_AREA_STYLE('',(#298546)); +#298546 = FILL_AREA_STYLE_COLOUR('',#270441); +#298547 = CURVE_STYLE('',#298548,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298548 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298549 = STYLED_ITEM('color',(#298550),#82465); +#298550 = PRESENTATION_STYLE_ASSIGNMENT((#298551,#298556)); +#298551 = SURFACE_STYLE_USAGE(.BOTH.,#298552); +#298552 = SURFACE_SIDE_STYLE('',(#298553)); +#298553 = SURFACE_STYLE_FILL_AREA(#298554); +#298554 = FILL_AREA_STYLE('',(#298555)); +#298555 = FILL_AREA_STYLE_COLOUR('',#270441); +#298556 = CURVE_STYLE('',#298557,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298557 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298558 = STYLED_ITEM('color',(#298559),#82496); +#298559 = PRESENTATION_STYLE_ASSIGNMENT((#298560,#298565)); +#298560 = SURFACE_STYLE_USAGE(.BOTH.,#298561); +#298561 = SURFACE_SIDE_STYLE('',(#298562)); +#298562 = SURFACE_STYLE_FILL_AREA(#298563); +#298563 = FILL_AREA_STYLE('',(#298564)); +#298564 = FILL_AREA_STYLE_COLOUR('',#270441); +#298565 = CURVE_STYLE('',#298566,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298566 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298567 = STYLED_ITEM('color',(#298568),#82520); +#298568 = PRESENTATION_STYLE_ASSIGNMENT((#298569,#298574)); +#298569 = SURFACE_STYLE_USAGE(.BOTH.,#298570); +#298570 = SURFACE_SIDE_STYLE('',(#298571)); +#298571 = SURFACE_STYLE_FILL_AREA(#298572); +#298572 = FILL_AREA_STYLE('',(#298573)); +#298573 = FILL_AREA_STYLE_COLOUR('',#270441); +#298574 = CURVE_STYLE('',#298575,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298575 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298576 = STYLED_ITEM('color',(#298577),#82544); +#298577 = PRESENTATION_STYLE_ASSIGNMENT((#298578,#298583)); +#298578 = SURFACE_STYLE_USAGE(.BOTH.,#298579); +#298579 = SURFACE_SIDE_STYLE('',(#298580)); +#298580 = SURFACE_STYLE_FILL_AREA(#298581); +#298581 = FILL_AREA_STYLE('',(#298582)); +#298582 = FILL_AREA_STYLE_COLOUR('',#270441); +#298583 = CURVE_STYLE('',#298584,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298584 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298585 = STYLED_ITEM('color',(#298586),#82561); +#298586 = PRESENTATION_STYLE_ASSIGNMENT((#298587,#298592)); +#298587 = SURFACE_STYLE_USAGE(.BOTH.,#298588); +#298588 = SURFACE_SIDE_STYLE('',(#298589)); +#298589 = SURFACE_STYLE_FILL_AREA(#298590); +#298590 = FILL_AREA_STYLE('',(#298591)); +#298591 = FILL_AREA_STYLE_COLOUR('',#298132); +#298592 = CURVE_STYLE('',#298593,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298593 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298594 = STYLED_ITEM('color',(#298595),#82583); +#298595 = PRESENTATION_STYLE_ASSIGNMENT((#298596,#298601)); +#298596 = SURFACE_STYLE_USAGE(.BOTH.,#298597); +#298597 = SURFACE_SIDE_STYLE('',(#298598)); +#298598 = SURFACE_STYLE_FILL_AREA(#298599); +#298599 = FILL_AREA_STYLE('',(#298600)); +#298600 = FILL_AREA_STYLE_COLOUR('',#298132); +#298601 = CURVE_STYLE('',#298602,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298602 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298603 = STYLED_ITEM('color',(#298604),#82655); +#298604 = PRESENTATION_STYLE_ASSIGNMENT((#298605,#298610)); +#298605 = SURFACE_STYLE_USAGE(.BOTH.,#298606); +#298606 = SURFACE_SIDE_STYLE('',(#298607)); +#298607 = SURFACE_STYLE_FILL_AREA(#298608); +#298608 = FILL_AREA_STYLE('',(#298609)); +#298609 = FILL_AREA_STYLE_COLOUR('',#298132); +#298610 = CURVE_STYLE('',#298611,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298611 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298612 = STYLED_ITEM('color',(#298613),#82667); +#298613 = PRESENTATION_STYLE_ASSIGNMENT((#298614,#298619)); +#298614 = SURFACE_STYLE_USAGE(.BOTH.,#298615); +#298615 = SURFACE_SIDE_STYLE('',(#298616)); +#298616 = SURFACE_STYLE_FILL_AREA(#298617); +#298617 = FILL_AREA_STYLE('',(#298618)); +#298618 = FILL_AREA_STYLE_COLOUR('',#298132); +#298619 = CURVE_STYLE('',#298620,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298620 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298621 = STYLED_ITEM('color',(#298622),#82679); +#298622 = PRESENTATION_STYLE_ASSIGNMENT((#298623,#298628)); +#298623 = SURFACE_STYLE_USAGE(.BOTH.,#298624); +#298624 = SURFACE_SIDE_STYLE('',(#298625)); +#298625 = SURFACE_STYLE_FILL_AREA(#298626); +#298626 = FILL_AREA_STYLE('',(#298627)); +#298627 = FILL_AREA_STYLE_COLOUR('',#298132); +#298628 = CURVE_STYLE('',#298629,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298629 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298630 = STYLED_ITEM('color',(#298631),#82691); +#298631 = PRESENTATION_STYLE_ASSIGNMENT((#298632,#298637)); +#298632 = SURFACE_STYLE_USAGE(.BOTH.,#298633); +#298633 = SURFACE_SIDE_STYLE('',(#298634)); +#298634 = SURFACE_STYLE_FILL_AREA(#298635); +#298635 = FILL_AREA_STYLE('',(#298636)); +#298636 = FILL_AREA_STYLE_COLOUR('',#298132); +#298637 = CURVE_STYLE('',#298638,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298638 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298639 = STYLED_ITEM('color',(#298640),#82720); +#298640 = PRESENTATION_STYLE_ASSIGNMENT((#298641,#298646)); +#298641 = SURFACE_STYLE_USAGE(.BOTH.,#298642); +#298642 = SURFACE_SIDE_STYLE('',(#298643)); +#298643 = SURFACE_STYLE_FILL_AREA(#298644); +#298644 = FILL_AREA_STYLE('',(#298645)); +#298645 = FILL_AREA_STYLE_COLOUR('',#298132); +#298646 = CURVE_STYLE('',#298647,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298648 = STYLED_ITEM('color',(#298649),#82743); +#298649 = PRESENTATION_STYLE_ASSIGNMENT((#298650,#298655)); +#298650 = SURFACE_STYLE_USAGE(.BOTH.,#298651); +#298651 = SURFACE_SIDE_STYLE('',(#298652)); +#298652 = SURFACE_STYLE_FILL_AREA(#298653); +#298653 = FILL_AREA_STYLE('',(#298654)); +#298654 = FILL_AREA_STYLE_COLOUR('',#298132); +#298655 = CURVE_STYLE('',#298656,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298656 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298657 = STYLED_ITEM('color',(#298658),#82766); +#298658 = PRESENTATION_STYLE_ASSIGNMENT((#298659,#298664)); +#298659 = SURFACE_STYLE_USAGE(.BOTH.,#298660); +#298660 = SURFACE_SIDE_STYLE('',(#298661)); +#298661 = SURFACE_STYLE_FILL_AREA(#298662); +#298662 = FILL_AREA_STYLE('',(#298663)); +#298663 = FILL_AREA_STYLE_COLOUR('',#298132); +#298664 = CURVE_STYLE('',#298665,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298665 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298666 = STYLED_ITEM('color',(#298667),#82783); +#298667 = PRESENTATION_STYLE_ASSIGNMENT((#298668,#298673)); +#298668 = SURFACE_STYLE_USAGE(.BOTH.,#298669); +#298669 = SURFACE_SIDE_STYLE('',(#298670)); +#298670 = SURFACE_STYLE_FILL_AREA(#298671); +#298671 = FILL_AREA_STYLE('',(#298672)); +#298672 = FILL_AREA_STYLE_COLOUR('',#298132); +#298673 = CURVE_STYLE('',#298674,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298674 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298675 = STYLED_ITEM('color',(#298676),#82812); +#298676 = PRESENTATION_STYLE_ASSIGNMENT((#298677,#298682)); +#298677 = SURFACE_STYLE_USAGE(.BOTH.,#298678); +#298678 = SURFACE_SIDE_STYLE('',(#298679)); +#298679 = SURFACE_STYLE_FILL_AREA(#298680); +#298680 = FILL_AREA_STYLE('',(#298681)); +#298681 = FILL_AREA_STYLE_COLOUR('',#298132); +#298682 = CURVE_STYLE('',#298683,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298683 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298684 = STYLED_ITEM('color',(#298685),#82835); +#298685 = PRESENTATION_STYLE_ASSIGNMENT((#298686,#298691)); +#298686 = SURFACE_STYLE_USAGE(.BOTH.,#298687); +#298687 = SURFACE_SIDE_STYLE('',(#298688)); +#298688 = SURFACE_STYLE_FILL_AREA(#298689); +#298689 = FILL_AREA_STYLE('',(#298690)); +#298690 = FILL_AREA_STYLE_COLOUR('',#298132); +#298691 = CURVE_STYLE('',#298692,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298692 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298693 = STYLED_ITEM('color',(#298694),#82858); +#298694 = PRESENTATION_STYLE_ASSIGNMENT((#298695,#298700)); +#298695 = SURFACE_STYLE_USAGE(.BOTH.,#298696); +#298696 = SURFACE_SIDE_STYLE('',(#298697)); +#298697 = SURFACE_STYLE_FILL_AREA(#298698); +#298698 = FILL_AREA_STYLE('',(#298699)); +#298699 = FILL_AREA_STYLE_COLOUR('',#298132); +#298700 = CURVE_STYLE('',#298701,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298701 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298702 = STYLED_ITEM('color',(#298703),#82875); +#298703 = PRESENTATION_STYLE_ASSIGNMENT((#298704,#298709)); +#298704 = SURFACE_STYLE_USAGE(.BOTH.,#298705); +#298705 = SURFACE_SIDE_STYLE('',(#298706)); +#298706 = SURFACE_STYLE_FILL_AREA(#298707); +#298707 = FILL_AREA_STYLE('',(#298708)); +#298708 = FILL_AREA_STYLE_COLOUR('',#298132); +#298709 = CURVE_STYLE('',#298710,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298710 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298711 = STYLED_ITEM('color',(#298712),#82904); +#298712 = PRESENTATION_STYLE_ASSIGNMENT((#298713,#298718)); +#298713 = SURFACE_STYLE_USAGE(.BOTH.,#298714); +#298714 = SURFACE_SIDE_STYLE('',(#298715)); +#298715 = SURFACE_STYLE_FILL_AREA(#298716); +#298716 = FILL_AREA_STYLE('',(#298717)); +#298717 = FILL_AREA_STYLE_COLOUR('',#298132); +#298718 = CURVE_STYLE('',#298719,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298719 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298720 = STYLED_ITEM('color',(#298721),#82927); +#298721 = PRESENTATION_STYLE_ASSIGNMENT((#298722,#298727)); +#298722 = SURFACE_STYLE_USAGE(.BOTH.,#298723); +#298723 = SURFACE_SIDE_STYLE('',(#298724)); +#298724 = SURFACE_STYLE_FILL_AREA(#298725); +#298725 = FILL_AREA_STYLE('',(#298726)); +#298726 = FILL_AREA_STYLE_COLOUR('',#298132); +#298727 = CURVE_STYLE('',#298728,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298728 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298729 = STYLED_ITEM('color',(#298730),#82950); +#298730 = PRESENTATION_STYLE_ASSIGNMENT((#298731,#298736)); +#298731 = SURFACE_STYLE_USAGE(.BOTH.,#298732); +#298732 = SURFACE_SIDE_STYLE('',(#298733)); +#298733 = SURFACE_STYLE_FILL_AREA(#298734); +#298734 = FILL_AREA_STYLE('',(#298735)); +#298735 = FILL_AREA_STYLE_COLOUR('',#298132); +#298736 = CURVE_STYLE('',#298737,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298737 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298738 = STYLED_ITEM('color',(#298739),#82967); +#298739 = PRESENTATION_STYLE_ASSIGNMENT((#298740,#298745)); +#298740 = SURFACE_STYLE_USAGE(.BOTH.,#298741); +#298741 = SURFACE_SIDE_STYLE('',(#298742)); +#298742 = SURFACE_STYLE_FILL_AREA(#298743); +#298743 = FILL_AREA_STYLE('',(#298744)); +#298744 = FILL_AREA_STYLE_COLOUR('',#298132); +#298745 = CURVE_STYLE('',#298746,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298746 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298747 = STYLED_ITEM('color',(#298748),#82996); +#298748 = PRESENTATION_STYLE_ASSIGNMENT((#298749,#298754)); +#298749 = SURFACE_STYLE_USAGE(.BOTH.,#298750); +#298750 = SURFACE_SIDE_STYLE('',(#298751)); +#298751 = SURFACE_STYLE_FILL_AREA(#298752); +#298752 = FILL_AREA_STYLE('',(#298753)); +#298753 = FILL_AREA_STYLE_COLOUR('',#298132); +#298754 = CURVE_STYLE('',#298755,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298755 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298756 = STYLED_ITEM('color',(#298757),#83019); +#298757 = PRESENTATION_STYLE_ASSIGNMENT((#298758,#298763)); +#298758 = SURFACE_STYLE_USAGE(.BOTH.,#298759); +#298759 = SURFACE_SIDE_STYLE('',(#298760)); +#298760 = SURFACE_STYLE_FILL_AREA(#298761); +#298761 = FILL_AREA_STYLE('',(#298762)); +#298762 = FILL_AREA_STYLE_COLOUR('',#298132); +#298763 = CURVE_STYLE('',#298764,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298764 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298765 = STYLED_ITEM('color',(#298766),#83042); +#298766 = PRESENTATION_STYLE_ASSIGNMENT((#298767,#298772)); +#298767 = SURFACE_STYLE_USAGE(.BOTH.,#298768); +#298768 = SURFACE_SIDE_STYLE('',(#298769)); +#298769 = SURFACE_STYLE_FILL_AREA(#298770); +#298770 = FILL_AREA_STYLE('',(#298771)); +#298771 = FILL_AREA_STYLE_COLOUR('',#298132); +#298772 = CURVE_STYLE('',#298773,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298773 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298774 = STYLED_ITEM('color',(#298775),#83059); +#298775 = PRESENTATION_STYLE_ASSIGNMENT((#298776,#298781)); +#298776 = SURFACE_STYLE_USAGE(.BOTH.,#298777); +#298777 = SURFACE_SIDE_STYLE('',(#298778)); +#298778 = SURFACE_STYLE_FILL_AREA(#298779); +#298779 = FILL_AREA_STYLE('',(#298780)); +#298780 = FILL_AREA_STYLE_COLOUR('',#298132); +#298781 = CURVE_STYLE('',#298782,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298782 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298783 = STYLED_ITEM('color',(#298784),#83088); +#298784 = PRESENTATION_STYLE_ASSIGNMENT((#298785,#298790)); +#298785 = SURFACE_STYLE_USAGE(.BOTH.,#298786); +#298786 = SURFACE_SIDE_STYLE('',(#298787)); +#298787 = SURFACE_STYLE_FILL_AREA(#298788); +#298788 = FILL_AREA_STYLE('',(#298789)); +#298789 = FILL_AREA_STYLE_COLOUR('',#298132); +#298790 = CURVE_STYLE('',#298791,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298791 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298792 = STYLED_ITEM('color',(#298793),#83111); +#298793 = PRESENTATION_STYLE_ASSIGNMENT((#298794,#298799)); +#298794 = SURFACE_STYLE_USAGE(.BOTH.,#298795); +#298795 = SURFACE_SIDE_STYLE('',(#298796)); +#298796 = SURFACE_STYLE_FILL_AREA(#298797); +#298797 = FILL_AREA_STYLE('',(#298798)); +#298798 = FILL_AREA_STYLE_COLOUR('',#298132); +#298799 = CURVE_STYLE('',#298800,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298800 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298801 = STYLED_ITEM('color',(#298802),#83134); +#298802 = PRESENTATION_STYLE_ASSIGNMENT((#298803,#298808)); +#298803 = SURFACE_STYLE_USAGE(.BOTH.,#298804); +#298804 = SURFACE_SIDE_STYLE('',(#298805)); +#298805 = SURFACE_STYLE_FILL_AREA(#298806); +#298806 = FILL_AREA_STYLE('',(#298807)); +#298807 = FILL_AREA_STYLE_COLOUR('',#298132); +#298808 = CURVE_STYLE('',#298809,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298809 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298810 = STYLED_ITEM('color',(#298811),#83151); +#298811 = PRESENTATION_STYLE_ASSIGNMENT((#298812,#298817)); +#298812 = SURFACE_STYLE_USAGE(.BOTH.,#298813); +#298813 = SURFACE_SIDE_STYLE('',(#298814)); +#298814 = SURFACE_STYLE_FILL_AREA(#298815); +#298815 = FILL_AREA_STYLE('',(#298816)); +#298816 = FILL_AREA_STYLE_COLOUR('',#298132); +#298817 = CURVE_STYLE('',#298818,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298818 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298819 = STYLED_ITEM('color',(#298820),#83163); +#298820 = PRESENTATION_STYLE_ASSIGNMENT((#298821,#298826)); +#298821 = SURFACE_STYLE_USAGE(.BOTH.,#298822); +#298822 = SURFACE_SIDE_STYLE('',(#298823)); +#298823 = SURFACE_STYLE_FILL_AREA(#298824); +#298824 = FILL_AREA_STYLE('',(#298825)); +#298825 = FILL_AREA_STYLE_COLOUR('',#270441); +#298826 = CURVE_STYLE('',#298827,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298827 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298828 = STYLED_ITEM('color',(#298829),#83175); +#298829 = PRESENTATION_STYLE_ASSIGNMENT((#298830,#298835)); +#298830 = SURFACE_STYLE_USAGE(.BOTH.,#298831); +#298831 = SURFACE_SIDE_STYLE('',(#298832)); +#298832 = SURFACE_STYLE_FILL_AREA(#298833); +#298833 = FILL_AREA_STYLE('',(#298834)); +#298834 = FILL_AREA_STYLE_COLOUR('',#270441); +#298835 = CURVE_STYLE('',#298836,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298836 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298837 = STYLED_ITEM('color',(#298838),#83187); +#298838 = PRESENTATION_STYLE_ASSIGNMENT((#298839,#298844)); +#298839 = SURFACE_STYLE_USAGE(.BOTH.,#298840); +#298840 = SURFACE_SIDE_STYLE('',(#298841)); +#298841 = SURFACE_STYLE_FILL_AREA(#298842); +#298842 = FILL_AREA_STYLE('',(#298843)); +#298843 = FILL_AREA_STYLE_COLOUR('',#270441); +#298844 = CURVE_STYLE('',#298845,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298845 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298846 = STYLED_ITEM('color',(#298847),#83199); +#298847 = PRESENTATION_STYLE_ASSIGNMENT((#298848,#298853)); +#298848 = SURFACE_STYLE_USAGE(.BOTH.,#298849); +#298849 = SURFACE_SIDE_STYLE('',(#298850)); +#298850 = SURFACE_STYLE_FILL_AREA(#298851); +#298851 = FILL_AREA_STYLE('',(#298852)); +#298852 = FILL_AREA_STYLE_COLOUR('',#270441); +#298853 = CURVE_STYLE('',#298854,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298854 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298855 = STYLED_ITEM('color',(#298856),#83211); +#298856 = PRESENTATION_STYLE_ASSIGNMENT((#298857,#298862)); +#298857 = SURFACE_STYLE_USAGE(.BOTH.,#298858); +#298858 = SURFACE_SIDE_STYLE('',(#298859)); +#298859 = SURFACE_STYLE_FILL_AREA(#298860); +#298860 = FILL_AREA_STYLE('',(#298861)); +#298861 = FILL_AREA_STYLE_COLOUR('',#270441); +#298862 = CURVE_STYLE('',#298863,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#298863 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298864 = STYLED_ITEM('color',(#298865),#83223); +#298865 = PRESENTATION_STYLE_ASSIGNMENT((#298866,#298871)); +#298866 = SURFACE_STYLE_USAGE(.BOTH.,#298867); +#298867 = SURFACE_SIDE_STYLE('',(#298868)); +#298868 = SURFACE_STYLE_FILL_AREA(#298869); +#298869 = FILL_AREA_STYLE('',(#298870)); +#298870 = FILL_AREA_STYLE_COLOUR('',#298132); +#298871 = CURVE_STYLE('',#298872,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298872 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298873 = STYLED_ITEM('color',(#298874),#83334); +#298874 = PRESENTATION_STYLE_ASSIGNMENT((#298875,#298880)); +#298875 = SURFACE_STYLE_USAGE(.BOTH.,#298876); +#298876 = SURFACE_SIDE_STYLE('',(#298877)); +#298877 = SURFACE_STYLE_FILL_AREA(#298878); +#298878 = FILL_AREA_STYLE('',(#298879)); +#298879 = FILL_AREA_STYLE_COLOUR('',#298132); +#298880 = CURVE_STYLE('',#298881,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298881 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298882 = STYLED_ITEM('color',(#298883),#83445); +#298883 = PRESENTATION_STYLE_ASSIGNMENT((#298884,#298889)); +#298884 = SURFACE_STYLE_USAGE(.BOTH.,#298885); +#298885 = SURFACE_SIDE_STYLE('',(#298886)); +#298886 = SURFACE_STYLE_FILL_AREA(#298887); +#298887 = FILL_AREA_STYLE('',(#298888)); +#298888 = FILL_AREA_STYLE_COLOUR('',#298132); +#298889 = CURVE_STYLE('',#298890,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298890 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298891 = STYLED_ITEM('color',(#298892),#83556); +#298892 = PRESENTATION_STYLE_ASSIGNMENT((#298893,#298898)); +#298893 = SURFACE_STYLE_USAGE(.BOTH.,#298894); +#298894 = SURFACE_SIDE_STYLE('',(#298895)); +#298895 = SURFACE_STYLE_FILL_AREA(#298896); +#298896 = FILL_AREA_STYLE('',(#298897)); +#298897 = FILL_AREA_STYLE_COLOUR('',#298132); +#298898 = CURVE_STYLE('',#298899,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298899 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298900 = STYLED_ITEM('color',(#298901),#83667); +#298901 = PRESENTATION_STYLE_ASSIGNMENT((#298902,#298907)); +#298902 = SURFACE_STYLE_USAGE(.BOTH.,#298903); +#298903 = SURFACE_SIDE_STYLE('',(#298904)); +#298904 = SURFACE_STYLE_FILL_AREA(#298905); +#298905 = FILL_AREA_STYLE('',(#298906)); +#298906 = FILL_AREA_STYLE_COLOUR('',#298132); +#298907 = CURVE_STYLE('',#298908,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298908 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298909 = STYLED_ITEM('color',(#298910),#83778); +#298910 = PRESENTATION_STYLE_ASSIGNMENT((#298911,#298916)); +#298911 = SURFACE_STYLE_USAGE(.BOTH.,#298912); +#298912 = SURFACE_SIDE_STYLE('',(#298913)); +#298913 = SURFACE_STYLE_FILL_AREA(#298914); +#298914 = FILL_AREA_STYLE('',(#298915)); +#298915 = FILL_AREA_STYLE_COLOUR('',#298132); +#298916 = CURVE_STYLE('',#298917,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298917 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298918 = STYLED_ITEM('color',(#298919),#83809); +#298919 = PRESENTATION_STYLE_ASSIGNMENT((#298920,#298925)); +#298920 = SURFACE_STYLE_USAGE(.BOTH.,#298921); +#298921 = SURFACE_SIDE_STYLE('',(#298922)); +#298922 = SURFACE_STYLE_FILL_AREA(#298923); +#298923 = FILL_AREA_STYLE('',(#298924)); +#298924 = FILL_AREA_STYLE_COLOUR('',#298132); +#298925 = CURVE_STYLE('',#298926,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298926 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298927 = STYLED_ITEM('color',(#298928),#83833); +#298928 = PRESENTATION_STYLE_ASSIGNMENT((#298929,#298934)); +#298929 = SURFACE_STYLE_USAGE(.BOTH.,#298930); +#298930 = SURFACE_SIDE_STYLE('',(#298931)); +#298931 = SURFACE_STYLE_FILL_AREA(#298932); +#298932 = FILL_AREA_STYLE('',(#298933)); +#298933 = FILL_AREA_STYLE_COLOUR('',#298132); +#298934 = CURVE_STYLE('',#298935,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298935 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298936 = STYLED_ITEM('color',(#298937),#83857); +#298937 = PRESENTATION_STYLE_ASSIGNMENT((#298938,#298943)); +#298938 = SURFACE_STYLE_USAGE(.BOTH.,#298939); +#298939 = SURFACE_SIDE_STYLE('',(#298940)); +#298940 = SURFACE_STYLE_FILL_AREA(#298941); +#298941 = FILL_AREA_STYLE('',(#298942)); +#298942 = FILL_AREA_STYLE_COLOUR('',#298132); +#298943 = CURVE_STYLE('',#298944,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298944 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298945 = STYLED_ITEM('color',(#298946),#83881); +#298946 = PRESENTATION_STYLE_ASSIGNMENT((#298947,#298952)); +#298947 = SURFACE_STYLE_USAGE(.BOTH.,#298948); +#298948 = SURFACE_SIDE_STYLE('',(#298949)); +#298949 = SURFACE_STYLE_FILL_AREA(#298950); +#298950 = FILL_AREA_STYLE('',(#298951)); +#298951 = FILL_AREA_STYLE_COLOUR('',#298132); +#298952 = CURVE_STYLE('',#298953,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298953 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298954 = STYLED_ITEM('color',(#298955),#83912); +#298955 = PRESENTATION_STYLE_ASSIGNMENT((#298956,#298961)); +#298956 = SURFACE_STYLE_USAGE(.BOTH.,#298957); +#298957 = SURFACE_SIDE_STYLE('',(#298958)); +#298958 = SURFACE_STYLE_FILL_AREA(#298959); +#298959 = FILL_AREA_STYLE('',(#298960)); +#298960 = FILL_AREA_STYLE_COLOUR('',#298132); +#298961 = CURVE_STYLE('',#298962,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298962 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298963 = STYLED_ITEM('color',(#298964),#83936); +#298964 = PRESENTATION_STYLE_ASSIGNMENT((#298965,#298970)); +#298965 = SURFACE_STYLE_USAGE(.BOTH.,#298966); +#298966 = SURFACE_SIDE_STYLE('',(#298967)); +#298967 = SURFACE_STYLE_FILL_AREA(#298968); +#298968 = FILL_AREA_STYLE('',(#298969)); +#298969 = FILL_AREA_STYLE_COLOUR('',#298132); +#298970 = CURVE_STYLE('',#298971,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298971 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298972 = STYLED_ITEM('color',(#298973),#83960); +#298973 = PRESENTATION_STYLE_ASSIGNMENT((#298974,#298979)); +#298974 = SURFACE_STYLE_USAGE(.BOTH.,#298975); +#298975 = SURFACE_SIDE_STYLE('',(#298976)); +#298976 = SURFACE_STYLE_FILL_AREA(#298977); +#298977 = FILL_AREA_STYLE('',(#298978)); +#298978 = FILL_AREA_STYLE_COLOUR('',#298132); +#298979 = CURVE_STYLE('',#298980,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298980 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298981 = STYLED_ITEM('color',(#298982),#83984); +#298982 = PRESENTATION_STYLE_ASSIGNMENT((#298983,#298988)); +#298983 = SURFACE_STYLE_USAGE(.BOTH.,#298984); +#298984 = SURFACE_SIDE_STYLE('',(#298985)); +#298985 = SURFACE_STYLE_FILL_AREA(#298986); +#298986 = FILL_AREA_STYLE('',(#298987)); +#298987 = FILL_AREA_STYLE_COLOUR('',#298132); +#298988 = CURVE_STYLE('',#298989,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298989 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298990 = STYLED_ITEM('color',(#298991),#84015); +#298991 = PRESENTATION_STYLE_ASSIGNMENT((#298992,#298997)); +#298992 = SURFACE_STYLE_USAGE(.BOTH.,#298993); +#298993 = SURFACE_SIDE_STYLE('',(#298994)); +#298994 = SURFACE_STYLE_FILL_AREA(#298995); +#298995 = FILL_AREA_STYLE('',(#298996)); +#298996 = FILL_AREA_STYLE_COLOUR('',#298132); +#298997 = CURVE_STYLE('',#298998,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#298998 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#298999 = STYLED_ITEM('color',(#299000),#84039); +#299000 = PRESENTATION_STYLE_ASSIGNMENT((#299001,#299006)); +#299001 = SURFACE_STYLE_USAGE(.BOTH.,#299002); +#299002 = SURFACE_SIDE_STYLE('',(#299003)); +#299003 = SURFACE_STYLE_FILL_AREA(#299004); +#299004 = FILL_AREA_STYLE('',(#299005)); +#299005 = FILL_AREA_STYLE_COLOUR('',#298132); +#299006 = CURVE_STYLE('',#299007,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299007 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299008 = STYLED_ITEM('color',(#299009),#84063); +#299009 = PRESENTATION_STYLE_ASSIGNMENT((#299010,#299015)); +#299010 = SURFACE_STYLE_USAGE(.BOTH.,#299011); +#299011 = SURFACE_SIDE_STYLE('',(#299012)); +#299012 = SURFACE_STYLE_FILL_AREA(#299013); +#299013 = FILL_AREA_STYLE('',(#299014)); +#299014 = FILL_AREA_STYLE_COLOUR('',#298132); +#299015 = CURVE_STYLE('',#299016,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299016 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299017 = STYLED_ITEM('color',(#299018),#84087); +#299018 = PRESENTATION_STYLE_ASSIGNMENT((#299019,#299024)); +#299019 = SURFACE_STYLE_USAGE(.BOTH.,#299020); +#299020 = SURFACE_SIDE_STYLE('',(#299021)); +#299021 = SURFACE_STYLE_FILL_AREA(#299022); +#299022 = FILL_AREA_STYLE('',(#299023)); +#299023 = FILL_AREA_STYLE_COLOUR('',#298132); +#299024 = CURVE_STYLE('',#299025,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299025 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299026 = STYLED_ITEM('color',(#299027),#84118); +#299027 = PRESENTATION_STYLE_ASSIGNMENT((#299028,#299033)); +#299028 = SURFACE_STYLE_USAGE(.BOTH.,#299029); +#299029 = SURFACE_SIDE_STYLE('',(#299030)); +#299030 = SURFACE_STYLE_FILL_AREA(#299031); +#299031 = FILL_AREA_STYLE('',(#299032)); +#299032 = FILL_AREA_STYLE_COLOUR('',#298132); +#299033 = CURVE_STYLE('',#299034,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299034 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299035 = STYLED_ITEM('color',(#299036),#84142); +#299036 = PRESENTATION_STYLE_ASSIGNMENT((#299037,#299042)); +#299037 = SURFACE_STYLE_USAGE(.BOTH.,#299038); +#299038 = SURFACE_SIDE_STYLE('',(#299039)); +#299039 = SURFACE_STYLE_FILL_AREA(#299040); +#299040 = FILL_AREA_STYLE('',(#299041)); +#299041 = FILL_AREA_STYLE_COLOUR('',#298132); +#299042 = CURVE_STYLE('',#299043,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299043 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299044 = STYLED_ITEM('color',(#299045),#84166); +#299045 = PRESENTATION_STYLE_ASSIGNMENT((#299046,#299051)); +#299046 = SURFACE_STYLE_USAGE(.BOTH.,#299047); +#299047 = SURFACE_SIDE_STYLE('',(#299048)); +#299048 = SURFACE_STYLE_FILL_AREA(#299049); +#299049 = FILL_AREA_STYLE('',(#299050)); +#299050 = FILL_AREA_STYLE_COLOUR('',#298132); +#299051 = CURVE_STYLE('',#299052,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299052 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299053 = STYLED_ITEM('color',(#299054),#84190); +#299054 = PRESENTATION_STYLE_ASSIGNMENT((#299055,#299060)); +#299055 = SURFACE_STYLE_USAGE(.BOTH.,#299056); +#299056 = SURFACE_SIDE_STYLE('',(#299057)); +#299057 = SURFACE_STYLE_FILL_AREA(#299058); +#299058 = FILL_AREA_STYLE('',(#299059)); +#299059 = FILL_AREA_STYLE_COLOUR('',#298132); +#299060 = CURVE_STYLE('',#299061,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299061 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299062 = STYLED_ITEM('color',(#299063),#84221); +#299063 = PRESENTATION_STYLE_ASSIGNMENT((#299064,#299069)); +#299064 = SURFACE_STYLE_USAGE(.BOTH.,#299065); +#299065 = SURFACE_SIDE_STYLE('',(#299066)); +#299066 = SURFACE_STYLE_FILL_AREA(#299067); +#299067 = FILL_AREA_STYLE('',(#299068)); +#299068 = FILL_AREA_STYLE_COLOUR('',#298132); +#299069 = CURVE_STYLE('',#299070,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299070 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299071 = STYLED_ITEM('color',(#299072),#84245); +#299072 = PRESENTATION_STYLE_ASSIGNMENT((#299073,#299078)); +#299073 = SURFACE_STYLE_USAGE(.BOTH.,#299074); +#299074 = SURFACE_SIDE_STYLE('',(#299075)); +#299075 = SURFACE_STYLE_FILL_AREA(#299076); +#299076 = FILL_AREA_STYLE('',(#299077)); +#299077 = FILL_AREA_STYLE_COLOUR('',#298132); +#299078 = CURVE_STYLE('',#299079,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299079 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299080 = STYLED_ITEM('color',(#299081),#84269); +#299081 = PRESENTATION_STYLE_ASSIGNMENT((#299082,#299087)); +#299082 = SURFACE_STYLE_USAGE(.BOTH.,#299083); +#299083 = SURFACE_SIDE_STYLE('',(#299084)); +#299084 = SURFACE_STYLE_FILL_AREA(#299085); +#299085 = FILL_AREA_STYLE('',(#299086)); +#299086 = FILL_AREA_STYLE_COLOUR('',#298132); +#299087 = CURVE_STYLE('',#299088,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299089 = STYLED_ITEM('color',(#299090),#84293); +#299090 = PRESENTATION_STYLE_ASSIGNMENT((#299091,#299096)); +#299091 = SURFACE_STYLE_USAGE(.BOTH.,#299092); +#299092 = SURFACE_SIDE_STYLE('',(#299093)); +#299093 = SURFACE_STYLE_FILL_AREA(#299094); +#299094 = FILL_AREA_STYLE('',(#299095)); +#299095 = FILL_AREA_STYLE_COLOUR('',#298132); +#299096 = CURVE_STYLE('',#299097,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299098 = STYLED_ITEM('color',(#299099),#84309); +#299099 = PRESENTATION_STYLE_ASSIGNMENT((#299100,#299105)); +#299100 = SURFACE_STYLE_USAGE(.BOTH.,#299101); +#299101 = SURFACE_SIDE_STYLE('',(#299102)); +#299102 = SURFACE_STYLE_FILL_AREA(#299103); +#299103 = FILL_AREA_STYLE('',(#299104)); +#299104 = FILL_AREA_STYLE_COLOUR('',#270441); +#299105 = CURVE_STYLE('',#299106,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299107 = STYLED_ITEM('color',(#299108),#84342); +#299108 = PRESENTATION_STYLE_ASSIGNMENT((#299109,#299114)); +#299109 = SURFACE_STYLE_USAGE(.BOTH.,#299110); +#299110 = SURFACE_SIDE_STYLE('',(#299111)); +#299111 = SURFACE_STYLE_FILL_AREA(#299112); +#299112 = FILL_AREA_STYLE('',(#299113)); +#299113 = FILL_AREA_STYLE_COLOUR('',#270441); +#299114 = CURVE_STYLE('',#299115,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299116 = STYLED_ITEM('color',(#299117),#84367); +#299117 = PRESENTATION_STYLE_ASSIGNMENT((#299118,#299123)); +#299118 = SURFACE_STYLE_USAGE(.BOTH.,#299119); +#299119 = SURFACE_SIDE_STYLE('',(#299120)); +#299120 = SURFACE_STYLE_FILL_AREA(#299121); +#299121 = FILL_AREA_STYLE('',(#299122)); +#299122 = FILL_AREA_STYLE_COLOUR('',#270441); +#299123 = CURVE_STYLE('',#299124,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299125 = STYLED_ITEM('color',(#299126),#84399); +#299126 = PRESENTATION_STYLE_ASSIGNMENT((#299127,#299132)); +#299127 = SURFACE_STYLE_USAGE(.BOTH.,#299128); +#299128 = SURFACE_SIDE_STYLE('',(#299129)); +#299129 = SURFACE_STYLE_FILL_AREA(#299130); +#299130 = FILL_AREA_STYLE('',(#299131)); +#299131 = FILL_AREA_STYLE_COLOUR('',#270441); +#299132 = CURVE_STYLE('',#299133,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299134 = STYLED_ITEM('color',(#299135),#84430); +#299135 = PRESENTATION_STYLE_ASSIGNMENT((#299136,#299141)); +#299136 = SURFACE_STYLE_USAGE(.BOTH.,#299137); +#299137 = SURFACE_SIDE_STYLE('',(#299138)); +#299138 = SURFACE_STYLE_FILL_AREA(#299139); +#299139 = FILL_AREA_STYLE('',(#299140)); +#299140 = FILL_AREA_STYLE_COLOUR('',#298132); +#299141 = CURVE_STYLE('',#299142,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299143 = STYLED_ITEM('color',(#299144),#84440); +#299144 = PRESENTATION_STYLE_ASSIGNMENT((#299145,#299150)); +#299145 = SURFACE_STYLE_USAGE(.BOTH.,#299146); +#299146 = SURFACE_SIDE_STYLE('',(#299147)); +#299147 = SURFACE_STYLE_FILL_AREA(#299148); +#299148 = FILL_AREA_STYLE('',(#299149)); +#299149 = FILL_AREA_STYLE_COLOUR('',#270441); +#299150 = CURVE_STYLE('',#299151,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299152 = STYLED_ITEM('color',(#299153),#84458); +#299153 = PRESENTATION_STYLE_ASSIGNMENT((#299154,#299159)); +#299154 = SURFACE_STYLE_USAGE(.BOTH.,#299155); +#299155 = SURFACE_SIDE_STYLE('',(#299156)); +#299156 = SURFACE_STYLE_FILL_AREA(#299157); +#299157 = FILL_AREA_STYLE('',(#299158)); +#299158 = FILL_AREA_STYLE_COLOUR('',#298132); +#299159 = CURVE_STYLE('',#299160,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299161 = STYLED_ITEM('color',(#299162),#84474); +#299162 = PRESENTATION_STYLE_ASSIGNMENT((#299163,#299168)); +#299163 = SURFACE_STYLE_USAGE(.BOTH.,#299164); +#299164 = SURFACE_SIDE_STYLE('',(#299165)); +#299165 = SURFACE_STYLE_FILL_AREA(#299166); +#299166 = FILL_AREA_STYLE('',(#299167)); +#299167 = FILL_AREA_STYLE_COLOUR('',#270441); +#299168 = CURVE_STYLE('',#299169,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299170 = STYLED_ITEM('color',(#299171),#84507); +#299171 = PRESENTATION_STYLE_ASSIGNMENT((#299172,#299177)); +#299172 = SURFACE_STYLE_USAGE(.BOTH.,#299173); +#299173 = SURFACE_SIDE_STYLE('',(#299174)); +#299174 = SURFACE_STYLE_FILL_AREA(#299175); +#299175 = FILL_AREA_STYLE('',(#299176)); +#299176 = FILL_AREA_STYLE_COLOUR('',#270441); +#299177 = CURVE_STYLE('',#299178,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299179 = STYLED_ITEM('color',(#299180),#84532); +#299180 = PRESENTATION_STYLE_ASSIGNMENT((#299181,#299186)); +#299181 = SURFACE_STYLE_USAGE(.BOTH.,#299182); +#299182 = SURFACE_SIDE_STYLE('',(#299183)); +#299183 = SURFACE_STYLE_FILL_AREA(#299184); +#299184 = FILL_AREA_STYLE('',(#299185)); +#299185 = FILL_AREA_STYLE_COLOUR('',#270441); +#299186 = CURVE_STYLE('',#299187,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299188 = STYLED_ITEM('color',(#299189),#84564); +#299189 = PRESENTATION_STYLE_ASSIGNMENT((#299190,#299195)); +#299190 = SURFACE_STYLE_USAGE(.BOTH.,#299191); +#299191 = SURFACE_SIDE_STYLE('',(#299192)); +#299192 = SURFACE_STYLE_FILL_AREA(#299193); +#299193 = FILL_AREA_STYLE('',(#299194)); +#299194 = FILL_AREA_STYLE_COLOUR('',#270441); +#299195 = CURVE_STYLE('',#299196,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299197 = STYLED_ITEM('color',(#299198),#84595); +#299198 = PRESENTATION_STYLE_ASSIGNMENT((#299199,#299204)); +#299199 = SURFACE_STYLE_USAGE(.BOTH.,#299200); +#299200 = SURFACE_SIDE_STYLE('',(#299201)); +#299201 = SURFACE_STYLE_FILL_AREA(#299202); +#299202 = FILL_AREA_STYLE('',(#299203)); +#299203 = FILL_AREA_STYLE_COLOUR('',#298132); +#299204 = CURVE_STYLE('',#299205,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299206 = STYLED_ITEM('color',(#299207),#84605); +#299207 = PRESENTATION_STYLE_ASSIGNMENT((#299208,#299213)); +#299208 = SURFACE_STYLE_USAGE(.BOTH.,#299209); +#299209 = SURFACE_SIDE_STYLE('',(#299210)); +#299210 = SURFACE_STYLE_FILL_AREA(#299211); +#299211 = FILL_AREA_STYLE('',(#299212)); +#299212 = FILL_AREA_STYLE_COLOUR('',#270441); +#299213 = CURVE_STYLE('',#299214,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299215 = STYLED_ITEM('color',(#299216),#84623); +#299216 = PRESENTATION_STYLE_ASSIGNMENT((#299217,#299222)); +#299217 = SURFACE_STYLE_USAGE(.BOTH.,#299218); +#299218 = SURFACE_SIDE_STYLE('',(#299219)); +#299219 = SURFACE_STYLE_FILL_AREA(#299220); +#299220 = FILL_AREA_STYLE('',(#299221)); +#299221 = FILL_AREA_STYLE_COLOUR('',#298132); +#299222 = CURVE_STYLE('',#299223,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299224 = STYLED_ITEM('color',(#299225),#84639); +#299225 = PRESENTATION_STYLE_ASSIGNMENT((#299226,#299231)); +#299226 = SURFACE_STYLE_USAGE(.BOTH.,#299227); +#299227 = SURFACE_SIDE_STYLE('',(#299228)); +#299228 = SURFACE_STYLE_FILL_AREA(#299229); +#299229 = FILL_AREA_STYLE('',(#299230)); +#299230 = FILL_AREA_STYLE_COLOUR('',#270441); +#299231 = CURVE_STYLE('',#299232,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299233 = STYLED_ITEM('color',(#299234),#84672); +#299234 = PRESENTATION_STYLE_ASSIGNMENT((#299235,#299240)); +#299235 = SURFACE_STYLE_USAGE(.BOTH.,#299236); +#299236 = SURFACE_SIDE_STYLE('',(#299237)); +#299237 = SURFACE_STYLE_FILL_AREA(#299238); +#299238 = FILL_AREA_STYLE('',(#299239)); +#299239 = FILL_AREA_STYLE_COLOUR('',#270441); +#299240 = CURVE_STYLE('',#299241,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299242 = STYLED_ITEM('color',(#299243),#84697); +#299243 = PRESENTATION_STYLE_ASSIGNMENT((#299244,#299249)); +#299244 = SURFACE_STYLE_USAGE(.BOTH.,#299245); +#299245 = SURFACE_SIDE_STYLE('',(#299246)); +#299246 = SURFACE_STYLE_FILL_AREA(#299247); +#299247 = FILL_AREA_STYLE('',(#299248)); +#299248 = FILL_AREA_STYLE_COLOUR('',#270441); +#299249 = CURVE_STYLE('',#299250,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299251 = STYLED_ITEM('color',(#299252),#84729); +#299252 = PRESENTATION_STYLE_ASSIGNMENT((#299253,#299258)); +#299253 = SURFACE_STYLE_USAGE(.BOTH.,#299254); +#299254 = SURFACE_SIDE_STYLE('',(#299255)); +#299255 = SURFACE_STYLE_FILL_AREA(#299256); +#299256 = FILL_AREA_STYLE('',(#299257)); +#299257 = FILL_AREA_STYLE_COLOUR('',#270441); +#299258 = CURVE_STYLE('',#299259,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299260 = STYLED_ITEM('color',(#299261),#84760); +#299261 = PRESENTATION_STYLE_ASSIGNMENT((#299262,#299267)); +#299262 = SURFACE_STYLE_USAGE(.BOTH.,#299263); +#299263 = SURFACE_SIDE_STYLE('',(#299264)); +#299264 = SURFACE_STYLE_FILL_AREA(#299265); +#299265 = FILL_AREA_STYLE('',(#299266)); +#299266 = FILL_AREA_STYLE_COLOUR('',#298132); +#299267 = CURVE_STYLE('',#299268,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299269 = STYLED_ITEM('color',(#299270),#84770); +#299270 = PRESENTATION_STYLE_ASSIGNMENT((#299271,#299276)); +#299271 = SURFACE_STYLE_USAGE(.BOTH.,#299272); +#299272 = SURFACE_SIDE_STYLE('',(#299273)); +#299273 = SURFACE_STYLE_FILL_AREA(#299274); +#299274 = FILL_AREA_STYLE('',(#299275)); +#299275 = FILL_AREA_STYLE_COLOUR('',#270441); +#299276 = CURVE_STYLE('',#299277,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299278 = STYLED_ITEM('color',(#299279),#84788); +#299279 = PRESENTATION_STYLE_ASSIGNMENT((#299280,#299285)); +#299280 = SURFACE_STYLE_USAGE(.BOTH.,#299281); +#299281 = SURFACE_SIDE_STYLE('',(#299282)); +#299282 = SURFACE_STYLE_FILL_AREA(#299283); +#299283 = FILL_AREA_STYLE('',(#299284)); +#299284 = FILL_AREA_STYLE_COLOUR('',#298132); +#299285 = CURVE_STYLE('',#299286,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299287 = STYLED_ITEM('color',(#299288),#84804); +#299288 = PRESENTATION_STYLE_ASSIGNMENT((#299289,#299294)); +#299289 = SURFACE_STYLE_USAGE(.BOTH.,#299290); +#299290 = SURFACE_SIDE_STYLE('',(#299291)); +#299291 = SURFACE_STYLE_FILL_AREA(#299292); +#299292 = FILL_AREA_STYLE('',(#299293)); +#299293 = FILL_AREA_STYLE_COLOUR('',#270441); +#299294 = CURVE_STYLE('',#299295,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299296 = STYLED_ITEM('color',(#299297),#84837); +#299297 = PRESENTATION_STYLE_ASSIGNMENT((#299298,#299303)); +#299298 = SURFACE_STYLE_USAGE(.BOTH.,#299299); +#299299 = SURFACE_SIDE_STYLE('',(#299300)); +#299300 = SURFACE_STYLE_FILL_AREA(#299301); +#299301 = FILL_AREA_STYLE('',(#299302)); +#299302 = FILL_AREA_STYLE_COLOUR('',#270441); +#299303 = CURVE_STYLE('',#299304,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299305 = STYLED_ITEM('color',(#299306),#84862); +#299306 = PRESENTATION_STYLE_ASSIGNMENT((#299307,#299312)); +#299307 = SURFACE_STYLE_USAGE(.BOTH.,#299308); +#299308 = SURFACE_SIDE_STYLE('',(#299309)); +#299309 = SURFACE_STYLE_FILL_AREA(#299310); +#299310 = FILL_AREA_STYLE('',(#299311)); +#299311 = FILL_AREA_STYLE_COLOUR('',#270441); +#299312 = CURVE_STYLE('',#299313,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299314 = STYLED_ITEM('color',(#299315),#84894); +#299315 = PRESENTATION_STYLE_ASSIGNMENT((#299316,#299321)); +#299316 = SURFACE_STYLE_USAGE(.BOTH.,#299317); +#299317 = SURFACE_SIDE_STYLE('',(#299318)); +#299318 = SURFACE_STYLE_FILL_AREA(#299319); +#299319 = FILL_AREA_STYLE('',(#299320)); +#299320 = FILL_AREA_STYLE_COLOUR('',#270441); +#299321 = CURVE_STYLE('',#299322,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299323 = STYLED_ITEM('color',(#299324),#84925); +#299324 = PRESENTATION_STYLE_ASSIGNMENT((#299325,#299330)); +#299325 = SURFACE_STYLE_USAGE(.BOTH.,#299326); +#299326 = SURFACE_SIDE_STYLE('',(#299327)); +#299327 = SURFACE_STYLE_FILL_AREA(#299328); +#299328 = FILL_AREA_STYLE('',(#299329)); +#299329 = FILL_AREA_STYLE_COLOUR('',#298132); +#299330 = CURVE_STYLE('',#299331,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299332 = STYLED_ITEM('color',(#299333),#84935); +#299333 = PRESENTATION_STYLE_ASSIGNMENT((#299334,#299339)); +#299334 = SURFACE_STYLE_USAGE(.BOTH.,#299335); +#299335 = SURFACE_SIDE_STYLE('',(#299336)); +#299336 = SURFACE_STYLE_FILL_AREA(#299337); +#299337 = FILL_AREA_STYLE('',(#299338)); +#299338 = FILL_AREA_STYLE_COLOUR('',#270441); +#299339 = CURVE_STYLE('',#299340,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299341 = STYLED_ITEM('color',(#299342),#84953); +#299342 = PRESENTATION_STYLE_ASSIGNMENT((#299343,#299348)); +#299343 = SURFACE_STYLE_USAGE(.BOTH.,#299344); +#299344 = SURFACE_SIDE_STYLE('',(#299345)); +#299345 = SURFACE_STYLE_FILL_AREA(#299346); +#299346 = FILL_AREA_STYLE('',(#299347)); +#299347 = FILL_AREA_STYLE_COLOUR('',#298132); +#299348 = CURVE_STYLE('',#299349,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299350 = STYLED_ITEM('color',(#299351),#84969); +#299351 = PRESENTATION_STYLE_ASSIGNMENT((#299352,#299357)); +#299352 = SURFACE_STYLE_USAGE(.BOTH.,#299353); +#299353 = SURFACE_SIDE_STYLE('',(#299354)); +#299354 = SURFACE_STYLE_FILL_AREA(#299355); +#299355 = FILL_AREA_STYLE('',(#299356)); +#299356 = FILL_AREA_STYLE_COLOUR('',#270441); +#299357 = CURVE_STYLE('',#299358,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299359 = STYLED_ITEM('color',(#299360),#85002); +#299360 = PRESENTATION_STYLE_ASSIGNMENT((#299361,#299366)); +#299361 = SURFACE_STYLE_USAGE(.BOTH.,#299362); +#299362 = SURFACE_SIDE_STYLE('',(#299363)); +#299363 = SURFACE_STYLE_FILL_AREA(#299364); +#299364 = FILL_AREA_STYLE('',(#299365)); +#299365 = FILL_AREA_STYLE_COLOUR('',#270441); +#299366 = CURVE_STYLE('',#299367,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299368 = STYLED_ITEM('color',(#299369),#85027); +#299369 = PRESENTATION_STYLE_ASSIGNMENT((#299370,#299375)); +#299370 = SURFACE_STYLE_USAGE(.BOTH.,#299371); +#299371 = SURFACE_SIDE_STYLE('',(#299372)); +#299372 = SURFACE_STYLE_FILL_AREA(#299373); +#299373 = FILL_AREA_STYLE('',(#299374)); +#299374 = FILL_AREA_STYLE_COLOUR('',#270441); +#299375 = CURVE_STYLE('',#299376,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299377 = STYLED_ITEM('color',(#299378),#85059); +#299378 = PRESENTATION_STYLE_ASSIGNMENT((#299379,#299384)); +#299379 = SURFACE_STYLE_USAGE(.BOTH.,#299380); +#299380 = SURFACE_SIDE_STYLE('',(#299381)); +#299381 = SURFACE_STYLE_FILL_AREA(#299382); +#299382 = FILL_AREA_STYLE('',(#299383)); +#299383 = FILL_AREA_STYLE_COLOUR('',#270441); +#299384 = CURVE_STYLE('',#299385,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299386 = STYLED_ITEM('color',(#299387),#85090); +#299387 = PRESENTATION_STYLE_ASSIGNMENT((#299388,#299393)); +#299388 = SURFACE_STYLE_USAGE(.BOTH.,#299389); +#299389 = SURFACE_SIDE_STYLE('',(#299390)); +#299390 = SURFACE_STYLE_FILL_AREA(#299391); +#299391 = FILL_AREA_STYLE('',(#299392)); +#299392 = FILL_AREA_STYLE_COLOUR('',#298132); +#299393 = CURVE_STYLE('',#299394,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#299394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299395 = STYLED_ITEM('color',(#299396),#85100); +#299396 = PRESENTATION_STYLE_ASSIGNMENT((#299397,#299402)); +#299397 = SURFACE_STYLE_USAGE(.BOTH.,#299398); +#299398 = SURFACE_SIDE_STYLE('',(#299399)); +#299399 = SURFACE_STYLE_FILL_AREA(#299400); +#299400 = FILL_AREA_STYLE('',(#299401)); +#299401 = FILL_AREA_STYLE_COLOUR('',#270441); +#299402 = CURVE_STYLE('',#299403,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299404 = STYLED_ITEM('color',(#299405),#85118); +#299405 = PRESENTATION_STYLE_ASSIGNMENT((#299406,#299411)); +#299406 = SURFACE_STYLE_USAGE(.BOTH.,#299407); +#299407 = SURFACE_SIDE_STYLE('',(#299408)); +#299408 = SURFACE_STYLE_FILL_AREA(#299409); +#299409 = FILL_AREA_STYLE('',(#299410)); +#299410 = FILL_AREA_STYLE_COLOUR('',#270441); +#299411 = CURVE_STYLE('',#299412,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299413 = STYLED_ITEM('color',(#299414),#85173); +#299414 = PRESENTATION_STYLE_ASSIGNMENT((#299415,#299420)); +#299415 = SURFACE_STYLE_USAGE(.BOTH.,#299416); +#299416 = SURFACE_SIDE_STYLE('',(#299417)); +#299417 = SURFACE_STYLE_FILL_AREA(#299418); +#299418 = FILL_AREA_STYLE('',(#299419)); +#299419 = FILL_AREA_STYLE_COLOUR('',#270441); +#299420 = CURVE_STYLE('',#299421,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299422 = STYLED_ITEM('color',(#299423),#85228); +#299423 = PRESENTATION_STYLE_ASSIGNMENT((#299424,#299429)); +#299424 = SURFACE_STYLE_USAGE(.BOTH.,#299425); +#299425 = SURFACE_SIDE_STYLE('',(#299426)); +#299426 = SURFACE_STYLE_FILL_AREA(#299427); +#299427 = FILL_AREA_STYLE('',(#299428)); +#299428 = FILL_AREA_STYLE_COLOUR('',#270441); +#299429 = CURVE_STYLE('',#299430,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299431 = STYLED_ITEM('color',(#299432),#85283); +#299432 = PRESENTATION_STYLE_ASSIGNMENT((#299433,#299438)); +#299433 = SURFACE_STYLE_USAGE(.BOTH.,#299434); +#299434 = SURFACE_SIDE_STYLE('',(#299435)); +#299435 = SURFACE_STYLE_FILL_AREA(#299436); +#299436 = FILL_AREA_STYLE('',(#299437)); +#299437 = FILL_AREA_STYLE_COLOUR('',#270441); +#299438 = CURVE_STYLE('',#299439,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299440 = STYLED_ITEM('color',(#299441),#85338); +#299441 = PRESENTATION_STYLE_ASSIGNMENT((#299442,#299447)); +#299442 = SURFACE_STYLE_USAGE(.BOTH.,#299443); +#299443 = SURFACE_SIDE_STYLE('',(#299444)); +#299444 = SURFACE_STYLE_FILL_AREA(#299445); +#299445 = FILL_AREA_STYLE('',(#299446)); +#299446 = FILL_AREA_STYLE_COLOUR('',#270441); +#299447 = CURVE_STYLE('',#299448,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299449 = STYLED_ITEM('color',(#299450),#85393); +#299450 = PRESENTATION_STYLE_ASSIGNMENT((#299451,#299456)); +#299451 = SURFACE_STYLE_USAGE(.BOTH.,#299452); +#299452 = SURFACE_SIDE_STYLE('',(#299453)); +#299453 = SURFACE_STYLE_FILL_AREA(#299454); +#299454 = FILL_AREA_STYLE('',(#299455)); +#299455 = FILL_AREA_STYLE_COLOUR('',#270441); +#299456 = CURVE_STYLE('',#299457,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299458 = STYLED_ITEM('color',(#299459),#85418); +#299459 = PRESENTATION_STYLE_ASSIGNMENT((#299460,#299465)); +#299460 = SURFACE_STYLE_USAGE(.BOTH.,#299461); +#299461 = SURFACE_SIDE_STYLE('',(#299462)); +#299462 = SURFACE_STYLE_FILL_AREA(#299463); +#299463 = FILL_AREA_STYLE('',(#299464)); +#299464 = FILL_AREA_STYLE_COLOUR('',#270441); +#299465 = CURVE_STYLE('',#299466,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299467 = STYLED_ITEM('color',(#299468),#85529); +#299468 = PRESENTATION_STYLE_ASSIGNMENT((#299469,#299474)); +#299469 = SURFACE_STYLE_USAGE(.BOTH.,#299470); +#299470 = SURFACE_SIDE_STYLE('',(#299471)); +#299471 = SURFACE_STYLE_FILL_AREA(#299472); +#299472 = FILL_AREA_STYLE('',(#299473)); +#299473 = FILL_AREA_STYLE_COLOUR('',#270441); +#299474 = CURVE_STYLE('',#299475,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299476 = STYLED_ITEM('color',(#299477),#85539); +#299477 = PRESENTATION_STYLE_ASSIGNMENT((#299478,#299483)); +#299478 = SURFACE_STYLE_USAGE(.BOTH.,#299479); +#299479 = SURFACE_SIDE_STYLE('',(#299480)); +#299480 = SURFACE_STYLE_FILL_AREA(#299481); +#299481 = FILL_AREA_STYLE('',(#299482)); +#299482 = FILL_AREA_STYLE_COLOUR('',#270441); +#299483 = CURVE_STYLE('',#299484,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299485 = STYLED_ITEM('color',(#299486),#85564); +#299486 = PRESENTATION_STYLE_ASSIGNMENT((#299487,#299492)); +#299487 = SURFACE_STYLE_USAGE(.BOTH.,#299488); +#299488 = SURFACE_SIDE_STYLE('',(#299489)); +#299489 = SURFACE_STYLE_FILL_AREA(#299490); +#299490 = FILL_AREA_STYLE('',(#299491)); +#299491 = FILL_AREA_STYLE_COLOUR('',#270441); +#299492 = CURVE_STYLE('',#299493,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299494 = STYLED_ITEM('color',(#299495),#85675); +#299495 = PRESENTATION_STYLE_ASSIGNMENT((#299496,#299501)); +#299496 = SURFACE_STYLE_USAGE(.BOTH.,#299497); +#299497 = SURFACE_SIDE_STYLE('',(#299498)); +#299498 = SURFACE_STYLE_FILL_AREA(#299499); +#299499 = FILL_AREA_STYLE('',(#299500)); +#299500 = FILL_AREA_STYLE_COLOUR('',#270441); +#299501 = CURVE_STYLE('',#299502,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299503 = STYLED_ITEM('color',(#299504),#85685); +#299504 = PRESENTATION_STYLE_ASSIGNMENT((#299505,#299510)); +#299505 = SURFACE_STYLE_USAGE(.BOTH.,#299506); +#299506 = SURFACE_SIDE_STYLE('',(#299507)); +#299507 = SURFACE_STYLE_FILL_AREA(#299508); +#299508 = FILL_AREA_STYLE('',(#299509)); +#299509 = FILL_AREA_STYLE_COLOUR('',#270441); +#299510 = CURVE_STYLE('',#299511,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299512 = STYLED_ITEM('color',(#299513),#85710); +#299513 = PRESENTATION_STYLE_ASSIGNMENT((#299514,#299519)); +#299514 = SURFACE_STYLE_USAGE(.BOTH.,#299515); +#299515 = SURFACE_SIDE_STYLE('',(#299516)); +#299516 = SURFACE_STYLE_FILL_AREA(#299517); +#299517 = FILL_AREA_STYLE('',(#299518)); +#299518 = FILL_AREA_STYLE_COLOUR('',#270441); +#299519 = CURVE_STYLE('',#299520,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299521 = STYLED_ITEM('color',(#299522),#85821); +#299522 = PRESENTATION_STYLE_ASSIGNMENT((#299523,#299528)); +#299523 = SURFACE_STYLE_USAGE(.BOTH.,#299524); +#299524 = SURFACE_SIDE_STYLE('',(#299525)); +#299525 = SURFACE_STYLE_FILL_AREA(#299526); +#299526 = FILL_AREA_STYLE('',(#299527)); +#299527 = FILL_AREA_STYLE_COLOUR('',#270441); +#299528 = CURVE_STYLE('',#299529,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299530 = STYLED_ITEM('color',(#299531),#85831); +#299531 = PRESENTATION_STYLE_ASSIGNMENT((#299532,#299537)); +#299532 = SURFACE_STYLE_USAGE(.BOTH.,#299533); +#299533 = SURFACE_SIDE_STYLE('',(#299534)); +#299534 = SURFACE_STYLE_FILL_AREA(#299535); +#299535 = FILL_AREA_STYLE('',(#299536)); +#299536 = FILL_AREA_STYLE_COLOUR('',#270441); +#299537 = CURVE_STYLE('',#299538,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299539 = STYLED_ITEM('color',(#299540),#85856); +#299540 = PRESENTATION_STYLE_ASSIGNMENT((#299541,#299546)); +#299541 = SURFACE_STYLE_USAGE(.BOTH.,#299542); +#299542 = SURFACE_SIDE_STYLE('',(#299543)); +#299543 = SURFACE_STYLE_FILL_AREA(#299544); +#299544 = FILL_AREA_STYLE('',(#299545)); +#299545 = FILL_AREA_STYLE_COLOUR('',#270441); +#299546 = CURVE_STYLE('',#299547,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299548 = STYLED_ITEM('color',(#299549),#85967); +#299549 = PRESENTATION_STYLE_ASSIGNMENT((#299550,#299555)); +#299550 = SURFACE_STYLE_USAGE(.BOTH.,#299551); +#299551 = SURFACE_SIDE_STYLE('',(#299552)); +#299552 = SURFACE_STYLE_FILL_AREA(#299553); +#299553 = FILL_AREA_STYLE('',(#299554)); +#299554 = FILL_AREA_STYLE_COLOUR('',#270441); +#299555 = CURVE_STYLE('',#299556,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299557 = STYLED_ITEM('color',(#299558),#85977); +#299558 = PRESENTATION_STYLE_ASSIGNMENT((#299559,#299564)); +#299559 = SURFACE_STYLE_USAGE(.BOTH.,#299560); +#299560 = SURFACE_SIDE_STYLE('',(#299561)); +#299561 = SURFACE_STYLE_FILL_AREA(#299562); +#299562 = FILL_AREA_STYLE('',(#299563)); +#299563 = FILL_AREA_STYLE_COLOUR('',#270441); +#299564 = CURVE_STYLE('',#299565,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299566 = STYLED_ITEM('color',(#299567),#86002); +#299567 = PRESENTATION_STYLE_ASSIGNMENT((#299568,#299573)); +#299568 = SURFACE_STYLE_USAGE(.BOTH.,#299569); +#299569 = SURFACE_SIDE_STYLE('',(#299570)); +#299570 = SURFACE_STYLE_FILL_AREA(#299571); +#299571 = FILL_AREA_STYLE('',(#299572)); +#299572 = FILL_AREA_STYLE_COLOUR('',#270441); +#299573 = CURVE_STYLE('',#299574,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299575 = STYLED_ITEM('color',(#299576),#86113); +#299576 = PRESENTATION_STYLE_ASSIGNMENT((#299577,#299582)); +#299577 = SURFACE_STYLE_USAGE(.BOTH.,#299578); +#299578 = SURFACE_SIDE_STYLE('',(#299579)); +#299579 = SURFACE_STYLE_FILL_AREA(#299580); +#299580 = FILL_AREA_STYLE('',(#299581)); +#299581 = FILL_AREA_STYLE_COLOUR('',#270441); +#299582 = CURVE_STYLE('',#299583,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299584 = STYLED_ITEM('color',(#299585),#86123); +#299585 = PRESENTATION_STYLE_ASSIGNMENT((#299586,#299591)); +#299586 = SURFACE_STYLE_USAGE(.BOTH.,#299587); +#299587 = SURFACE_SIDE_STYLE('',(#299588)); +#299588 = SURFACE_STYLE_FILL_AREA(#299589); +#299589 = FILL_AREA_STYLE('',(#299590)); +#299590 = FILL_AREA_STYLE_COLOUR('',#270441); +#299591 = CURVE_STYLE('',#299592,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299593 = STYLED_ITEM('color',(#299594),#86133); +#299594 = PRESENTATION_STYLE_ASSIGNMENT((#299595,#299600)); +#299595 = SURFACE_STYLE_USAGE(.BOTH.,#299596); +#299596 = SURFACE_SIDE_STYLE('',(#299597)); +#299597 = SURFACE_STYLE_FILL_AREA(#299598); +#299598 = FILL_AREA_STYLE('',(#299599)); +#299599 = FILL_AREA_STYLE_COLOUR('',#270441); +#299600 = CURVE_STYLE('',#299601,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299602 = STYLED_ITEM('color',(#299603),#86164); +#299603 = PRESENTATION_STYLE_ASSIGNMENT((#299604,#299609)); +#299604 = SURFACE_STYLE_USAGE(.BOTH.,#299605); +#299605 = SURFACE_SIDE_STYLE('',(#299606)); +#299606 = SURFACE_STYLE_FILL_AREA(#299607); +#299607 = FILL_AREA_STYLE('',(#299608)); +#299608 = FILL_AREA_STYLE_COLOUR('',#270441); +#299609 = CURVE_STYLE('',#299610,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299610 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299611 = STYLED_ITEM('color',(#299612),#86188); +#299612 = PRESENTATION_STYLE_ASSIGNMENT((#299613,#299618)); +#299613 = SURFACE_STYLE_USAGE(.BOTH.,#299614); +#299614 = SURFACE_SIDE_STYLE('',(#299615)); +#299615 = SURFACE_STYLE_FILL_AREA(#299616); +#299616 = FILL_AREA_STYLE('',(#299617)); +#299617 = FILL_AREA_STYLE_COLOUR('',#270441); +#299618 = CURVE_STYLE('',#299619,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299619 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299620 = STYLED_ITEM('color',(#299621),#86212); +#299621 = PRESENTATION_STYLE_ASSIGNMENT((#299622,#299627)); +#299622 = SURFACE_STYLE_USAGE(.BOTH.,#299623); +#299623 = SURFACE_SIDE_STYLE('',(#299624)); +#299624 = SURFACE_STYLE_FILL_AREA(#299625); +#299625 = FILL_AREA_STYLE('',(#299626)); +#299626 = FILL_AREA_STYLE_COLOUR('',#270441); +#299627 = CURVE_STYLE('',#299628,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299628 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299629 = STYLED_ITEM('color',(#299630),#86229); +#299630 = PRESENTATION_STYLE_ASSIGNMENT((#299631,#299636)); +#299631 = SURFACE_STYLE_USAGE(.BOTH.,#299632); +#299632 = SURFACE_SIDE_STYLE('',(#299633)); +#299633 = SURFACE_STYLE_FILL_AREA(#299634); +#299634 = FILL_AREA_STYLE('',(#299635)); +#299635 = FILL_AREA_STYLE_COLOUR('',#270441); +#299636 = CURVE_STYLE('',#299637,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299637 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299638 = STYLED_ITEM('color',(#299639),#86239); +#299639 = PRESENTATION_STYLE_ASSIGNMENT((#299640,#299645)); +#299640 = SURFACE_STYLE_USAGE(.BOTH.,#299641); +#299641 = SURFACE_SIDE_STYLE('',(#299642)); +#299642 = SURFACE_STYLE_FILL_AREA(#299643); +#299643 = FILL_AREA_STYLE('',(#299644)); +#299644 = FILL_AREA_STYLE_COLOUR('',#270441); +#299645 = CURVE_STYLE('',#299646,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299647 = STYLED_ITEM('color',(#299648),#86270); +#299648 = PRESENTATION_STYLE_ASSIGNMENT((#299649,#299654)); +#299649 = SURFACE_STYLE_USAGE(.BOTH.,#299650); +#299650 = SURFACE_SIDE_STYLE('',(#299651)); +#299651 = SURFACE_STYLE_FILL_AREA(#299652); +#299652 = FILL_AREA_STYLE('',(#299653)); +#299653 = FILL_AREA_STYLE_COLOUR('',#270441); +#299654 = CURVE_STYLE('',#299655,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299655 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299656 = STYLED_ITEM('color',(#299657),#86294); +#299657 = PRESENTATION_STYLE_ASSIGNMENT((#299658,#299663)); +#299658 = SURFACE_STYLE_USAGE(.BOTH.,#299659); +#299659 = SURFACE_SIDE_STYLE('',(#299660)); +#299660 = SURFACE_STYLE_FILL_AREA(#299661); +#299661 = FILL_AREA_STYLE('',(#299662)); +#299662 = FILL_AREA_STYLE_COLOUR('',#270441); +#299663 = CURVE_STYLE('',#299664,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299664 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299665 = STYLED_ITEM('color',(#299666),#86318); +#299666 = PRESENTATION_STYLE_ASSIGNMENT((#299667,#299672)); +#299667 = SURFACE_STYLE_USAGE(.BOTH.,#299668); +#299668 = SURFACE_SIDE_STYLE('',(#299669)); +#299669 = SURFACE_STYLE_FILL_AREA(#299670); +#299670 = FILL_AREA_STYLE('',(#299671)); +#299671 = FILL_AREA_STYLE_COLOUR('',#270441); +#299672 = CURVE_STYLE('',#299673,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299673 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299674 = STYLED_ITEM('color',(#299675),#86335); +#299675 = PRESENTATION_STYLE_ASSIGNMENT((#299676,#299681)); +#299676 = SURFACE_STYLE_USAGE(.BOTH.,#299677); +#299677 = SURFACE_SIDE_STYLE('',(#299678)); +#299678 = SURFACE_STYLE_FILL_AREA(#299679); +#299679 = FILL_AREA_STYLE('',(#299680)); +#299680 = FILL_AREA_STYLE_COLOUR('',#270441); +#299681 = CURVE_STYLE('',#299682,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299682 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299683 = STYLED_ITEM('color',(#299684),#86345); +#299684 = PRESENTATION_STYLE_ASSIGNMENT((#299685,#299690)); +#299685 = SURFACE_STYLE_USAGE(.BOTH.,#299686); +#299686 = SURFACE_SIDE_STYLE('',(#299687)); +#299687 = SURFACE_STYLE_FILL_AREA(#299688); +#299688 = FILL_AREA_STYLE('',(#299689)); +#299689 = FILL_AREA_STYLE_COLOUR('',#270441); +#299690 = CURVE_STYLE('',#299691,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299691 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299692 = STYLED_ITEM('color',(#299693),#86376); +#299693 = PRESENTATION_STYLE_ASSIGNMENT((#299694,#299699)); +#299694 = SURFACE_STYLE_USAGE(.BOTH.,#299695); +#299695 = SURFACE_SIDE_STYLE('',(#299696)); +#299696 = SURFACE_STYLE_FILL_AREA(#299697); +#299697 = FILL_AREA_STYLE('',(#299698)); +#299698 = FILL_AREA_STYLE_COLOUR('',#270441); +#299699 = CURVE_STYLE('',#299700,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299700 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299701 = STYLED_ITEM('color',(#299702),#86400); +#299702 = PRESENTATION_STYLE_ASSIGNMENT((#299703,#299708)); +#299703 = SURFACE_STYLE_USAGE(.BOTH.,#299704); +#299704 = SURFACE_SIDE_STYLE('',(#299705)); +#299705 = SURFACE_STYLE_FILL_AREA(#299706); +#299706 = FILL_AREA_STYLE('',(#299707)); +#299707 = FILL_AREA_STYLE_COLOUR('',#270441); +#299708 = CURVE_STYLE('',#299709,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299709 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299710 = STYLED_ITEM('color',(#299711),#86424); +#299711 = PRESENTATION_STYLE_ASSIGNMENT((#299712,#299717)); +#299712 = SURFACE_STYLE_USAGE(.BOTH.,#299713); +#299713 = SURFACE_SIDE_STYLE('',(#299714)); +#299714 = SURFACE_STYLE_FILL_AREA(#299715); +#299715 = FILL_AREA_STYLE('',(#299716)); +#299716 = FILL_AREA_STYLE_COLOUR('',#270441); +#299717 = CURVE_STYLE('',#299718,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299718 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299719 = STYLED_ITEM('color',(#299720),#86441); +#299720 = PRESENTATION_STYLE_ASSIGNMENT((#299721,#299726)); +#299721 = SURFACE_STYLE_USAGE(.BOTH.,#299722); +#299722 = SURFACE_SIDE_STYLE('',(#299723)); +#299723 = SURFACE_STYLE_FILL_AREA(#299724); +#299724 = FILL_AREA_STYLE('',(#299725)); +#299725 = FILL_AREA_STYLE_COLOUR('',#270441); +#299726 = CURVE_STYLE('',#299727,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299727 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299728 = STYLED_ITEM('color',(#299729),#86451); +#299729 = PRESENTATION_STYLE_ASSIGNMENT((#299730,#299735)); +#299730 = SURFACE_STYLE_USAGE(.BOTH.,#299731); +#299731 = SURFACE_SIDE_STYLE('',(#299732)); +#299732 = SURFACE_STYLE_FILL_AREA(#299733); +#299733 = FILL_AREA_STYLE('',(#299734)); +#299734 = FILL_AREA_STYLE_COLOUR('',#270441); +#299735 = CURVE_STYLE('',#299736,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299736 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299737 = STYLED_ITEM('color',(#299738),#86482); +#299738 = PRESENTATION_STYLE_ASSIGNMENT((#299739,#299744)); +#299739 = SURFACE_STYLE_USAGE(.BOTH.,#299740); +#299740 = SURFACE_SIDE_STYLE('',(#299741)); +#299741 = SURFACE_STYLE_FILL_AREA(#299742); +#299742 = FILL_AREA_STYLE('',(#299743)); +#299743 = FILL_AREA_STYLE_COLOUR('',#270441); +#299744 = CURVE_STYLE('',#299745,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299745 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299746 = STYLED_ITEM('color',(#299747),#86506); +#299747 = PRESENTATION_STYLE_ASSIGNMENT((#299748,#299753)); +#299748 = SURFACE_STYLE_USAGE(.BOTH.,#299749); +#299749 = SURFACE_SIDE_STYLE('',(#299750)); +#299750 = SURFACE_STYLE_FILL_AREA(#299751); +#299751 = FILL_AREA_STYLE('',(#299752)); +#299752 = FILL_AREA_STYLE_COLOUR('',#270441); +#299753 = CURVE_STYLE('',#299754,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299754 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299755 = STYLED_ITEM('color',(#299756),#86530); +#299756 = PRESENTATION_STYLE_ASSIGNMENT((#299757,#299762)); +#299757 = SURFACE_STYLE_USAGE(.BOTH.,#299758); +#299758 = SURFACE_SIDE_STYLE('',(#299759)); +#299759 = SURFACE_STYLE_FILL_AREA(#299760); +#299760 = FILL_AREA_STYLE('',(#299761)); +#299761 = FILL_AREA_STYLE_COLOUR('',#270441); +#299762 = CURVE_STYLE('',#299763,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299763 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299764 = STYLED_ITEM('color',(#299765),#86547); +#299765 = PRESENTATION_STYLE_ASSIGNMENT((#299766,#299771)); +#299766 = SURFACE_STYLE_USAGE(.BOTH.,#299767); +#299767 = SURFACE_SIDE_STYLE('',(#299768)); +#299768 = SURFACE_STYLE_FILL_AREA(#299769); +#299769 = FILL_AREA_STYLE('',(#299770)); +#299770 = FILL_AREA_STYLE_COLOUR('',#270441); +#299771 = CURVE_STYLE('',#299772,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299772 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299773 = STYLED_ITEM('color',(#299774),#86557); +#299774 = PRESENTATION_STYLE_ASSIGNMENT((#299775,#299780)); +#299775 = SURFACE_STYLE_USAGE(.BOTH.,#299776); +#299776 = SURFACE_SIDE_STYLE('',(#299777)); +#299777 = SURFACE_STYLE_FILL_AREA(#299778); +#299778 = FILL_AREA_STYLE('',(#299779)); +#299779 = FILL_AREA_STYLE_COLOUR('',#270441); +#299780 = CURVE_STYLE('',#299781,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299781 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299782 = STYLED_ITEM('color',(#299783),#86588); +#299783 = PRESENTATION_STYLE_ASSIGNMENT((#299784,#299789)); +#299784 = SURFACE_STYLE_USAGE(.BOTH.,#299785); +#299785 = SURFACE_SIDE_STYLE('',(#299786)); +#299786 = SURFACE_STYLE_FILL_AREA(#299787); +#299787 = FILL_AREA_STYLE('',(#299788)); +#299788 = FILL_AREA_STYLE_COLOUR('',#270441); +#299789 = CURVE_STYLE('',#299790,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299790 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299791 = STYLED_ITEM('color',(#299792),#86612); +#299792 = PRESENTATION_STYLE_ASSIGNMENT((#299793,#299798)); +#299793 = SURFACE_STYLE_USAGE(.BOTH.,#299794); +#299794 = SURFACE_SIDE_STYLE('',(#299795)); +#299795 = SURFACE_STYLE_FILL_AREA(#299796); +#299796 = FILL_AREA_STYLE('',(#299797)); +#299797 = FILL_AREA_STYLE_COLOUR('',#270441); +#299798 = CURVE_STYLE('',#299799,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299799 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299800 = STYLED_ITEM('color',(#299801),#86636); +#299801 = PRESENTATION_STYLE_ASSIGNMENT((#299802,#299807)); +#299802 = SURFACE_STYLE_USAGE(.BOTH.,#299803); +#299803 = SURFACE_SIDE_STYLE('',(#299804)); +#299804 = SURFACE_STYLE_FILL_AREA(#299805); +#299805 = FILL_AREA_STYLE('',(#299806)); +#299806 = FILL_AREA_STYLE_COLOUR('',#270441); +#299807 = CURVE_STYLE('',#299808,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299808 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299809 = STYLED_ITEM('color',(#299810),#86653); +#299810 = PRESENTATION_STYLE_ASSIGNMENT((#299811,#299816)); +#299811 = SURFACE_STYLE_USAGE(.BOTH.,#299812); +#299812 = SURFACE_SIDE_STYLE('',(#299813)); +#299813 = SURFACE_STYLE_FILL_AREA(#299814); +#299814 = FILL_AREA_STYLE('',(#299815)); +#299815 = FILL_AREA_STYLE_COLOUR('',#270441); +#299816 = CURVE_STYLE('',#299817,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299817 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299818 = STYLED_ITEM('color',(#299819),#86669); +#299819 = PRESENTATION_STYLE_ASSIGNMENT((#299820,#299825)); +#299820 = SURFACE_STYLE_USAGE(.BOTH.,#299821); +#299821 = SURFACE_SIDE_STYLE('',(#299822)); +#299822 = SURFACE_STYLE_FILL_AREA(#299823); +#299823 = FILL_AREA_STYLE('',(#299824)); +#299824 = FILL_AREA_STYLE_COLOUR('',#270441); +#299825 = CURVE_STYLE('',#299826,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299827 = STYLED_ITEM('color',(#299828),#86686); +#299828 = PRESENTATION_STYLE_ASSIGNMENT((#299829,#299834)); +#299829 = SURFACE_STYLE_USAGE(.BOTH.,#299830); +#299830 = SURFACE_SIDE_STYLE('',(#299831)); +#299831 = SURFACE_STYLE_FILL_AREA(#299832); +#299832 = FILL_AREA_STYLE('',(#299833)); +#299833 = FILL_AREA_STYLE_COLOUR('',#270441); +#299834 = CURVE_STYLE('',#299835,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299835 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299836 = STYLED_ITEM('color',(#299837),#86703); +#299837 = PRESENTATION_STYLE_ASSIGNMENT((#299838,#299843)); +#299838 = SURFACE_STYLE_USAGE(.BOTH.,#299839); +#299839 = SURFACE_SIDE_STYLE('',(#299840)); +#299840 = SURFACE_STYLE_FILL_AREA(#299841); +#299841 = FILL_AREA_STYLE('',(#299842)); +#299842 = FILL_AREA_STYLE_COLOUR('',#270441); +#299843 = CURVE_STYLE('',#299844,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299844 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299845 = STYLED_ITEM('color',(#299846),#86720); +#299846 = PRESENTATION_STYLE_ASSIGNMENT((#299847,#299852)); +#299847 = SURFACE_STYLE_USAGE(.BOTH.,#299848); +#299848 = SURFACE_SIDE_STYLE('',(#299849)); +#299849 = SURFACE_STYLE_FILL_AREA(#299850); +#299850 = FILL_AREA_STYLE('',(#299851)); +#299851 = FILL_AREA_STYLE_COLOUR('',#270441); +#299852 = CURVE_STYLE('',#299853,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299853 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299854 = STYLED_ITEM('color',(#299855),#86730); +#299855 = PRESENTATION_STYLE_ASSIGNMENT((#299856,#299861)); +#299856 = SURFACE_STYLE_USAGE(.BOTH.,#299857); +#299857 = SURFACE_SIDE_STYLE('',(#299858)); +#299858 = SURFACE_STYLE_FILL_AREA(#299859); +#299859 = FILL_AREA_STYLE('',(#299860)); +#299860 = FILL_AREA_STYLE_COLOUR('',#270441); +#299861 = CURVE_STYLE('',#299862,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299862 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299863 = STYLED_ITEM('color',(#299864),#86746); +#299864 = PRESENTATION_STYLE_ASSIGNMENT((#299865,#299870)); +#299865 = SURFACE_STYLE_USAGE(.BOTH.,#299866); +#299866 = SURFACE_SIDE_STYLE('',(#299867)); +#299867 = SURFACE_STYLE_FILL_AREA(#299868); +#299868 = FILL_AREA_STYLE('',(#299869)); +#299869 = FILL_AREA_STYLE_COLOUR('',#270441); +#299870 = CURVE_STYLE('',#299871,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299871 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299872 = STYLED_ITEM('color',(#299873),#86763); +#299873 = PRESENTATION_STYLE_ASSIGNMENT((#299874,#299879)); +#299874 = SURFACE_STYLE_USAGE(.BOTH.,#299875); +#299875 = SURFACE_SIDE_STYLE('',(#299876)); +#299876 = SURFACE_STYLE_FILL_AREA(#299877); +#299877 = FILL_AREA_STYLE('',(#299878)); +#299878 = FILL_AREA_STYLE_COLOUR('',#270441); +#299879 = CURVE_STYLE('',#299880,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299880 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299881 = STYLED_ITEM('color',(#299882),#86780); +#299882 = PRESENTATION_STYLE_ASSIGNMENT((#299883,#299888)); +#299883 = SURFACE_STYLE_USAGE(.BOTH.,#299884); +#299884 = SURFACE_SIDE_STYLE('',(#299885)); +#299885 = SURFACE_STYLE_FILL_AREA(#299886); +#299886 = FILL_AREA_STYLE('',(#299887)); +#299887 = FILL_AREA_STYLE_COLOUR('',#270441); +#299888 = CURVE_STYLE('',#299889,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299889 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299890 = STYLED_ITEM('color',(#299891),#86797); +#299891 = PRESENTATION_STYLE_ASSIGNMENT((#299892,#299897)); +#299892 = SURFACE_STYLE_USAGE(.BOTH.,#299893); +#299893 = SURFACE_SIDE_STYLE('',(#299894)); +#299894 = SURFACE_STYLE_FILL_AREA(#299895); +#299895 = FILL_AREA_STYLE('',(#299896)); +#299896 = FILL_AREA_STYLE_COLOUR('',#270441); +#299897 = CURVE_STYLE('',#299898,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299898 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299899 = STYLED_ITEM('color',(#299900),#86807); +#299900 = PRESENTATION_STYLE_ASSIGNMENT((#299901,#299906)); +#299901 = SURFACE_STYLE_USAGE(.BOTH.,#299902); +#299902 = SURFACE_SIDE_STYLE('',(#299903)); +#299903 = SURFACE_STYLE_FILL_AREA(#299904); +#299904 = FILL_AREA_STYLE('',(#299905)); +#299905 = FILL_AREA_STYLE_COLOUR('',#270441); +#299906 = CURVE_STYLE('',#299907,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299907 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299908 = STYLED_ITEM('color',(#299909),#86823); +#299909 = PRESENTATION_STYLE_ASSIGNMENT((#299910,#299915)); +#299910 = SURFACE_STYLE_USAGE(.BOTH.,#299911); +#299911 = SURFACE_SIDE_STYLE('',(#299912)); +#299912 = SURFACE_STYLE_FILL_AREA(#299913); +#299913 = FILL_AREA_STYLE('',(#299914)); +#299914 = FILL_AREA_STYLE_COLOUR('',#270441); +#299915 = CURVE_STYLE('',#299916,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299916 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299917 = STYLED_ITEM('color',(#299918),#86840); +#299918 = PRESENTATION_STYLE_ASSIGNMENT((#299919,#299924)); +#299919 = SURFACE_STYLE_USAGE(.BOTH.,#299920); +#299920 = SURFACE_SIDE_STYLE('',(#299921)); +#299921 = SURFACE_STYLE_FILL_AREA(#299922); +#299922 = FILL_AREA_STYLE('',(#299923)); +#299923 = FILL_AREA_STYLE_COLOUR('',#270441); +#299924 = CURVE_STYLE('',#299925,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299926 = STYLED_ITEM('color',(#299927),#86857); +#299927 = PRESENTATION_STYLE_ASSIGNMENT((#299928,#299933)); +#299928 = SURFACE_STYLE_USAGE(.BOTH.,#299929); +#299929 = SURFACE_SIDE_STYLE('',(#299930)); +#299930 = SURFACE_STYLE_FILL_AREA(#299931); +#299931 = FILL_AREA_STYLE('',(#299932)); +#299932 = FILL_AREA_STYLE_COLOUR('',#270441); +#299933 = CURVE_STYLE('',#299934,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299934 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299935 = STYLED_ITEM('color',(#299936),#86874); +#299936 = PRESENTATION_STYLE_ASSIGNMENT((#299937,#299942)); +#299937 = SURFACE_STYLE_USAGE(.BOTH.,#299938); +#299938 = SURFACE_SIDE_STYLE('',(#299939)); +#299939 = SURFACE_STYLE_FILL_AREA(#299940); +#299940 = FILL_AREA_STYLE('',(#299941)); +#299941 = FILL_AREA_STYLE_COLOUR('',#270441); +#299942 = CURVE_STYLE('',#299943,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299943 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299944 = STYLED_ITEM('color',(#299945),#86884); +#299945 = PRESENTATION_STYLE_ASSIGNMENT((#299946,#299951)); +#299946 = SURFACE_STYLE_USAGE(.BOTH.,#299947); +#299947 = SURFACE_SIDE_STYLE('',(#299948)); +#299948 = SURFACE_STYLE_FILL_AREA(#299949); +#299949 = FILL_AREA_STYLE('',(#299950)); +#299950 = FILL_AREA_STYLE_COLOUR('',#270441); +#299951 = CURVE_STYLE('',#299952,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299952 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299953 = STYLED_ITEM('color',(#299954),#86900); +#299954 = PRESENTATION_STYLE_ASSIGNMENT((#299955,#299960)); +#299955 = SURFACE_STYLE_USAGE(.BOTH.,#299956); +#299956 = SURFACE_SIDE_STYLE('',(#299957)); +#299957 = SURFACE_STYLE_FILL_AREA(#299958); +#299958 = FILL_AREA_STYLE('',(#299959)); +#299959 = FILL_AREA_STYLE_COLOUR('',#270441); +#299960 = CURVE_STYLE('',#299961,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299961 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299962 = STYLED_ITEM('color',(#299963),#86917); +#299963 = PRESENTATION_STYLE_ASSIGNMENT((#299964,#299969)); +#299964 = SURFACE_STYLE_USAGE(.BOTH.,#299965); +#299965 = SURFACE_SIDE_STYLE('',(#299966)); +#299966 = SURFACE_STYLE_FILL_AREA(#299967); +#299967 = FILL_AREA_STYLE('',(#299968)); +#299968 = FILL_AREA_STYLE_COLOUR('',#270441); +#299969 = CURVE_STYLE('',#299970,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299970 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299971 = STYLED_ITEM('color',(#299972),#86934); +#299972 = PRESENTATION_STYLE_ASSIGNMENT((#299973,#299978)); +#299973 = SURFACE_STYLE_USAGE(.BOTH.,#299974); +#299974 = SURFACE_SIDE_STYLE('',(#299975)); +#299975 = SURFACE_STYLE_FILL_AREA(#299976); +#299976 = FILL_AREA_STYLE('',(#299977)); +#299977 = FILL_AREA_STYLE_COLOUR('',#270441); +#299978 = CURVE_STYLE('',#299979,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299980 = STYLED_ITEM('color',(#299981),#86951); +#299981 = PRESENTATION_STYLE_ASSIGNMENT((#299982,#299987)); +#299982 = SURFACE_STYLE_USAGE(.BOTH.,#299983); +#299983 = SURFACE_SIDE_STYLE('',(#299984)); +#299984 = SURFACE_STYLE_FILL_AREA(#299985); +#299985 = FILL_AREA_STYLE('',(#299986)); +#299986 = FILL_AREA_STYLE_COLOUR('',#270441); +#299987 = CURVE_STYLE('',#299988,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299988 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299989 = STYLED_ITEM('color',(#299990),#86961); +#299990 = PRESENTATION_STYLE_ASSIGNMENT((#299991,#299996)); +#299991 = SURFACE_STYLE_USAGE(.BOTH.,#299992); +#299992 = SURFACE_SIDE_STYLE('',(#299993)); +#299993 = SURFACE_STYLE_FILL_AREA(#299994); +#299994 = FILL_AREA_STYLE('',(#299995)); +#299995 = FILL_AREA_STYLE_COLOUR('',#270441); +#299996 = CURVE_STYLE('',#299997,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#299997 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#299998 = STYLED_ITEM('color',(#299999),#86977); +#299999 = PRESENTATION_STYLE_ASSIGNMENT((#300000,#300005)); +#300000 = SURFACE_STYLE_USAGE(.BOTH.,#300001); +#300001 = SURFACE_SIDE_STYLE('',(#300002)); +#300002 = SURFACE_STYLE_FILL_AREA(#300003); +#300003 = FILL_AREA_STYLE('',(#300004)); +#300004 = FILL_AREA_STYLE_COLOUR('',#270441); +#300005 = CURVE_STYLE('',#300006,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#300006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300007 = STYLED_ITEM('color',(#300008),#86994); +#300008 = PRESENTATION_STYLE_ASSIGNMENT((#300009,#300014)); +#300009 = SURFACE_STYLE_USAGE(.BOTH.,#300010); +#300010 = SURFACE_SIDE_STYLE('',(#300011)); +#300011 = SURFACE_STYLE_FILL_AREA(#300012); +#300012 = FILL_AREA_STYLE('',(#300013)); +#300013 = FILL_AREA_STYLE_COLOUR('',#270441); +#300014 = CURVE_STYLE('',#300015,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#300015 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300016 = STYLED_ITEM('color',(#300017),#87011); +#300017 = PRESENTATION_STYLE_ASSIGNMENT((#300018,#300023)); +#300018 = SURFACE_STYLE_USAGE(.BOTH.,#300019); +#300019 = SURFACE_SIDE_STYLE('',(#300020)); +#300020 = SURFACE_STYLE_FILL_AREA(#300021); +#300021 = FILL_AREA_STYLE('',(#300022)); +#300022 = FILL_AREA_STYLE_COLOUR('',#270441); +#300023 = CURVE_STYLE('',#300024,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#300024 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300025 = STYLED_ITEM('color',(#300026),#87028); +#300026 = PRESENTATION_STYLE_ASSIGNMENT((#300027,#300032)); +#300027 = SURFACE_STYLE_USAGE(.BOTH.,#300028); +#300028 = SURFACE_SIDE_STYLE('',(#300029)); +#300029 = SURFACE_STYLE_FILL_AREA(#300030); +#300030 = FILL_AREA_STYLE('',(#300031)); +#300031 = FILL_AREA_STYLE_COLOUR('',#270441); +#300032 = CURVE_STYLE('',#300033,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#300033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300034 = STYLED_ITEM('color',(#300035),#87038); +#300035 = PRESENTATION_STYLE_ASSIGNMENT((#300036,#300041)); +#300036 = SURFACE_STYLE_USAGE(.BOTH.,#300037); +#300037 = SURFACE_SIDE_STYLE('',(#300038)); +#300038 = SURFACE_STYLE_FILL_AREA(#300039); +#300039 = FILL_AREA_STYLE('',(#300040)); +#300040 = FILL_AREA_STYLE_COLOUR('',#298132); +#300041 = CURVE_STYLE('',#300042,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#300042 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300043 = STYLED_ITEM('color',(#300044),#87050); +#300044 = PRESENTATION_STYLE_ASSIGNMENT((#300045,#300050)); +#300045 = SURFACE_STYLE_USAGE(.BOTH.,#300046); +#300046 = SURFACE_SIDE_STYLE('',(#300047)); +#300047 = SURFACE_STYLE_FILL_AREA(#300048); +#300048 = FILL_AREA_STYLE('',(#300049)); +#300049 = FILL_AREA_STYLE_COLOUR('',#298132); +#300050 = CURVE_STYLE('',#300051,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#300051 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300052 = STYLED_ITEM('color',(#300053),#87062); +#300053 = PRESENTATION_STYLE_ASSIGNMENT((#300054,#300059)); +#300054 = SURFACE_STYLE_USAGE(.BOTH.,#300055); +#300055 = SURFACE_SIDE_STYLE('',(#300056)); +#300056 = SURFACE_STYLE_FILL_AREA(#300057); +#300057 = FILL_AREA_STYLE('',(#300058)); +#300058 = FILL_AREA_STYLE_COLOUR('',#298132); +#300059 = CURVE_STYLE('',#300060,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#300060 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300061 = STYLED_ITEM('color',(#300062),#87074); +#300062 = PRESENTATION_STYLE_ASSIGNMENT((#300063,#300068)); +#300063 = SURFACE_STYLE_USAGE(.BOTH.,#300064); +#300064 = SURFACE_SIDE_STYLE('',(#300065)); +#300065 = SURFACE_STYLE_FILL_AREA(#300066); +#300066 = FILL_AREA_STYLE('',(#300067)); +#300067 = FILL_AREA_STYLE_COLOUR('',#298132); +#300068 = CURVE_STYLE('',#300069,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#300069 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300070 = STYLED_ITEM('color',(#300071),#87086); +#300071 = PRESENTATION_STYLE_ASSIGNMENT((#300072,#300077)); +#300072 = SURFACE_STYLE_USAGE(.BOTH.,#300073); +#300073 = SURFACE_SIDE_STYLE('',(#300074)); +#300074 = SURFACE_STYLE_FILL_AREA(#300075); +#300075 = FILL_AREA_STYLE('',(#300076)); +#300076 = FILL_AREA_STYLE_COLOUR('',#298132); +#300077 = CURVE_STYLE('',#300078,POSITIVE_LENGTH_MEASURE(0.1),#298132); +#300078 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300079 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #300080,#300089,#300098,#300107,#300116,#300125,#300134,#300143, + #300152,#300161,#300170,#300179,#300188,#300197,#300206,#300215, + #300224,#300233,#300242,#300251,#300260,#300269,#300278,#300287, + #300296,#300305,#300314,#300323,#300332,#300341,#300350,#300359, + #300368,#300377,#300386,#300395,#300404,#300413,#300422,#300431, + #300440,#300449,#300458,#300467,#300476,#300485,#300494,#300503, + #300512,#300521,#300530,#300539,#300548,#300557,#300566,#300575, + #300584,#300593,#300602,#300611,#300620,#300629,#300638,#300647, + #300656,#300665,#300674,#300683,#300692,#300701,#300710,#300719, + #300728,#300737,#300746,#300755,#300764,#300773,#300782,#300791, + #300800,#300809,#300818,#300827,#300836,#300845,#300854,#300863, + #300872,#300881,#300890,#300899,#300908,#300917,#300926,#300935, + #300944,#300953,#300962,#300971,#300980,#300989,#300998,#301007, + #301016,#301025,#301034,#301043,#301052,#301061,#301070,#301079, + #301088,#301097,#301106,#301115,#301124,#301133,#301142,#301151, + #301160,#301169,#301178,#301187,#301196,#301205,#301214,#301223, + #301232,#301241,#301250,#301259,#301268,#301277,#301286,#301295, + #301304,#301313,#301322,#301331,#301340,#301349,#301358,#301367, + #301376,#301385,#301394,#301403,#301412,#301421,#301430,#301439, + #301448,#301457,#301466,#301475,#301484,#301493,#301502,#301511, + #301520,#301529,#301538,#301547,#301556,#301565,#301574,#301583, + #301592,#301601,#301610,#301619,#301628,#301637,#301646,#301655, + #301664,#301673,#301682,#301691,#301700,#301709,#301718,#301727, + #301736,#301745,#301754,#301763,#301772,#301781,#301790,#301799, + #301808,#301817,#301826,#301835,#301844,#301853,#301862,#301871, + #301880,#301889,#301898,#301907,#301916,#301925,#301934,#301943, + #301952,#301961,#301970,#301979,#301988,#301997,#302006,#302015, + #302024,#302033,#302042,#302051,#302060,#302069,#302078,#302087, + #302096,#302105,#302114,#302123,#302132,#302141,#302150,#302159, + #302168,#302177,#302186,#302195,#302204,#302213,#302222,#302231, + #302240,#302249,#302258,#302267,#302276,#302285,#302294,#302303, + #302312,#302321,#302330,#302339,#302348,#302357,#302366,#302375, + #302384,#302393,#302402,#302411,#302420,#302429,#302438,#302447, + #302456,#302465,#302474,#302483,#302492,#302501,#302510,#302519, + #302528,#302537,#302546,#302555,#302564,#302573,#302582,#302591, + #302600,#302609,#302618,#302627,#302636,#302645,#302654,#302663, + #302672,#302681,#302690,#302699,#302708,#302717,#302726,#302735, + #302744,#302753,#302762,#302771,#302780,#302789,#302798,#302807, + #302816,#302825,#302834,#302843,#302852,#302861,#302870,#302879, + #302888,#302897,#302906,#302915,#302924,#302933,#302942,#302951, + #302960,#302969,#302978,#302987,#302996,#303005,#303014,#303023, + #303032,#303041,#303050,#303059,#303068,#303077,#303086,#303095, + #303104,#303113,#303122,#303131,#303140,#303149,#303158,#303167, + #303176,#303185,#303194,#303203,#303212,#303221),#51682); +#300080 = STYLED_ITEM('color',(#300081),#43642); +#300081 = PRESENTATION_STYLE_ASSIGNMENT((#300082,#300087)); +#300082 = SURFACE_STYLE_USAGE(.BOTH.,#300083); +#300083 = SURFACE_SIDE_STYLE('',(#300084)); +#300084 = SURFACE_STYLE_FILL_AREA(#300085); +#300085 = FILL_AREA_STYLE('',(#300086)); +#300086 = FILL_AREA_STYLE_COLOUR('',#270350); +#300087 = CURVE_STYLE('',#300088,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300088 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300089 = STYLED_ITEM('color',(#300090),#43682); +#300090 = PRESENTATION_STYLE_ASSIGNMENT((#300091,#300096)); +#300091 = SURFACE_STYLE_USAGE(.BOTH.,#300092); +#300092 = SURFACE_SIDE_STYLE('',(#300093)); +#300093 = SURFACE_STYLE_FILL_AREA(#300094); +#300094 = FILL_AREA_STYLE('',(#300095)); +#300095 = FILL_AREA_STYLE_COLOUR('',#270350); +#300096 = CURVE_STYLE('',#300097,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300097 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300098 = STYLED_ITEM('color',(#300099),#43745); +#300099 = PRESENTATION_STYLE_ASSIGNMENT((#300100,#300105)); +#300100 = SURFACE_STYLE_USAGE(.BOTH.,#300101); +#300101 = SURFACE_SIDE_STYLE('',(#300102)); +#300102 = SURFACE_STYLE_FILL_AREA(#300103); +#300103 = FILL_AREA_STYLE('',(#300104)); +#300104 = FILL_AREA_STYLE_COLOUR('',#270350); +#300105 = CURVE_STYLE('',#300106,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300106 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300107 = STYLED_ITEM('color',(#300108),#43808); +#300108 = PRESENTATION_STYLE_ASSIGNMENT((#300109,#300114)); +#300109 = SURFACE_STYLE_USAGE(.BOTH.,#300110); +#300110 = SURFACE_SIDE_STYLE('',(#300111)); +#300111 = SURFACE_STYLE_FILL_AREA(#300112); +#300112 = FILL_AREA_STYLE('',(#300113)); +#300113 = FILL_AREA_STYLE_COLOUR('',#270350); +#300114 = CURVE_STYLE('',#300115,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300115 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300116 = STYLED_ITEM('color',(#300117),#43825); +#300117 = PRESENTATION_STYLE_ASSIGNMENT((#300118,#300123)); +#300118 = SURFACE_STYLE_USAGE(.BOTH.,#300119); +#300119 = SURFACE_SIDE_STYLE('',(#300120)); +#300120 = SURFACE_STYLE_FILL_AREA(#300121); +#300121 = FILL_AREA_STYLE('',(#300122)); +#300122 = FILL_AREA_STYLE_COLOUR('',#270350); +#300123 = CURVE_STYLE('',#300124,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300124 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300125 = STYLED_ITEM('color',(#300126),#44182); +#300126 = PRESENTATION_STYLE_ASSIGNMENT((#300127,#300132)); +#300127 = SURFACE_STYLE_USAGE(.BOTH.,#300128); +#300128 = SURFACE_SIDE_STYLE('',(#300129)); +#300129 = SURFACE_STYLE_FILL_AREA(#300130); +#300130 = FILL_AREA_STYLE('',(#300131)); +#300131 = FILL_AREA_STYLE_COLOUR('',#270350); +#300132 = CURVE_STYLE('',#300133,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300133 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300134 = STYLED_ITEM('color',(#300135),#44204); +#300135 = PRESENTATION_STYLE_ASSIGNMENT((#300136,#300141)); +#300136 = SURFACE_STYLE_USAGE(.BOTH.,#300137); +#300137 = SURFACE_SIDE_STYLE('',(#300138)); +#300138 = SURFACE_STYLE_FILL_AREA(#300139); +#300139 = FILL_AREA_STYLE('',(#300140)); +#300140 = FILL_AREA_STYLE_COLOUR('',#270350); +#300141 = CURVE_STYLE('',#300142,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300142 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300143 = STYLED_ITEM('color',(#300144),#44221); +#300144 = PRESENTATION_STYLE_ASSIGNMENT((#300145,#300150)); +#300145 = SURFACE_STYLE_USAGE(.BOTH.,#300146); +#300146 = SURFACE_SIDE_STYLE('',(#300147)); +#300147 = SURFACE_STYLE_FILL_AREA(#300148); +#300148 = FILL_AREA_STYLE('',(#300149)); +#300149 = FILL_AREA_STYLE_COLOUR('',#270350); +#300150 = CURVE_STYLE('',#300151,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300151 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300152 = OVER_RIDING_STYLED_ITEM('overriding color',(#300153),#44254, + #300143); +#300153 = PRESENTATION_STYLE_ASSIGNMENT((#300154,#300159)); +#300154 = SURFACE_STYLE_USAGE(.BOTH.,#300155); +#300155 = SURFACE_SIDE_STYLE('',(#300156)); +#300156 = SURFACE_STYLE_FILL_AREA(#300157); +#300157 = FILL_AREA_STYLE('',(#300158)); +#300158 = FILL_AREA_STYLE_COLOUR('',#285989); +#300159 = CURVE_STYLE('',#300160,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300160 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300161 = OVER_RIDING_STYLED_ITEM('overriding color',(#300162),#44286, + #300143); +#300162 = PRESENTATION_STYLE_ASSIGNMENT((#300163,#300168)); +#300163 = SURFACE_STYLE_USAGE(.BOTH.,#300164); +#300164 = SURFACE_SIDE_STYLE('',(#300165)); +#300165 = SURFACE_STYLE_FILL_AREA(#300166); +#300166 = FILL_AREA_STYLE('',(#300167)); +#300167 = FILL_AREA_STYLE_COLOUR('',#285989); +#300168 = CURVE_STYLE('',#300169,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300169 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300170 = OVER_RIDING_STYLED_ITEM('overriding color',(#300171),#44320, + #300143); +#300171 = PRESENTATION_STYLE_ASSIGNMENT((#300172,#300177)); +#300172 = SURFACE_STYLE_USAGE(.BOTH.,#300173); +#300173 = SURFACE_SIDE_STYLE('',(#300174)); +#300174 = SURFACE_STYLE_FILL_AREA(#300175); +#300175 = FILL_AREA_STYLE('',(#300176)); +#300176 = FILL_AREA_STYLE_COLOUR('',#285989); +#300177 = CURVE_STYLE('',#300178,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300178 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300179 = OVER_RIDING_STYLED_ITEM('overriding color',(#300180),#44352, + #300143); +#300180 = PRESENTATION_STYLE_ASSIGNMENT((#300181,#300186)); +#300181 = SURFACE_STYLE_USAGE(.BOTH.,#300182); +#300182 = SURFACE_SIDE_STYLE('',(#300183)); +#300183 = SURFACE_STYLE_FILL_AREA(#300184); +#300184 = FILL_AREA_STYLE('',(#300185)); +#300185 = FILL_AREA_STYLE_COLOUR('',#285989); +#300186 = CURVE_STYLE('',#300187,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300187 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300188 = OVER_RIDING_STYLED_ITEM('overriding color',(#300189),#44386, + #300143); +#300189 = PRESENTATION_STYLE_ASSIGNMENT((#300190,#300195)); +#300190 = SURFACE_STYLE_USAGE(.BOTH.,#300191); +#300191 = SURFACE_SIDE_STYLE('',(#300192)); +#300192 = SURFACE_STYLE_FILL_AREA(#300193); +#300193 = FILL_AREA_STYLE('',(#300194)); +#300194 = FILL_AREA_STYLE_COLOUR('',#285989); +#300195 = CURVE_STYLE('',#300196,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300196 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300197 = OVER_RIDING_STYLED_ITEM('overriding color',(#300198),#44418, + #300143); +#300198 = PRESENTATION_STYLE_ASSIGNMENT((#300199,#300204)); +#300199 = SURFACE_STYLE_USAGE(.BOTH.,#300200); +#300200 = SURFACE_SIDE_STYLE('',(#300201)); +#300201 = SURFACE_STYLE_FILL_AREA(#300202); +#300202 = FILL_AREA_STYLE('',(#300203)); +#300203 = FILL_AREA_STYLE_COLOUR('',#285989); +#300204 = CURVE_STYLE('',#300205,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300205 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300206 = OVER_RIDING_STYLED_ITEM('overriding color',(#300207),#44452, + #300143); +#300207 = PRESENTATION_STYLE_ASSIGNMENT((#300208,#300213)); +#300208 = SURFACE_STYLE_USAGE(.BOTH.,#300209); +#300209 = SURFACE_SIDE_STYLE('',(#300210)); +#300210 = SURFACE_STYLE_FILL_AREA(#300211); +#300211 = FILL_AREA_STYLE('',(#300212)); +#300212 = FILL_AREA_STYLE_COLOUR('',#285989); +#300213 = CURVE_STYLE('',#300214,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300214 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300215 = OVER_RIDING_STYLED_ITEM('overriding color',(#300216),#44484, + #300143); +#300216 = PRESENTATION_STYLE_ASSIGNMENT((#300217,#300222)); +#300217 = SURFACE_STYLE_USAGE(.BOTH.,#300218); +#300218 = SURFACE_SIDE_STYLE('',(#300219)); +#300219 = SURFACE_STYLE_FILL_AREA(#300220); +#300220 = FILL_AREA_STYLE('',(#300221)); +#300221 = FILL_AREA_STYLE_COLOUR('',#285989); +#300222 = CURVE_STYLE('',#300223,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300223 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300224 = OVER_RIDING_STYLED_ITEM('overriding color',(#300225),#44518, + #300143); +#300225 = PRESENTATION_STYLE_ASSIGNMENT((#300226,#300231)); +#300226 = SURFACE_STYLE_USAGE(.BOTH.,#300227); +#300227 = SURFACE_SIDE_STYLE('',(#300228)); +#300228 = SURFACE_STYLE_FILL_AREA(#300229); +#300229 = FILL_AREA_STYLE('',(#300230)); +#300230 = FILL_AREA_STYLE_COLOUR('',#285989); +#300231 = CURVE_STYLE('',#300232,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300232 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300233 = OVER_RIDING_STYLED_ITEM('overriding color',(#300234),#44550, + #300143); +#300234 = PRESENTATION_STYLE_ASSIGNMENT((#300235,#300240)); +#300235 = SURFACE_STYLE_USAGE(.BOTH.,#300236); +#300236 = SURFACE_SIDE_STYLE('',(#300237)); +#300237 = SURFACE_STYLE_FILL_AREA(#300238); +#300238 = FILL_AREA_STYLE('',(#300239)); +#300239 = FILL_AREA_STYLE_COLOUR('',#285989); +#300240 = CURVE_STYLE('',#300241,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300241 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300242 = OVER_RIDING_STYLED_ITEM('overriding color',(#300243),#44584, + #300143); +#300243 = PRESENTATION_STYLE_ASSIGNMENT((#300244,#300249)); +#300244 = SURFACE_STYLE_USAGE(.BOTH.,#300245); +#300245 = SURFACE_SIDE_STYLE('',(#300246)); +#300246 = SURFACE_STYLE_FILL_AREA(#300247); +#300247 = FILL_AREA_STYLE('',(#300248)); +#300248 = FILL_AREA_STYLE_COLOUR('',#285989); +#300249 = CURVE_STYLE('',#300250,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300250 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300251 = OVER_RIDING_STYLED_ITEM('overriding color',(#300252),#44616, + #300143); +#300252 = PRESENTATION_STYLE_ASSIGNMENT((#300253,#300258)); +#300253 = SURFACE_STYLE_USAGE(.BOTH.,#300254); +#300254 = SURFACE_SIDE_STYLE('',(#300255)); +#300255 = SURFACE_STYLE_FILL_AREA(#300256); +#300256 = FILL_AREA_STYLE('',(#300257)); +#300257 = FILL_AREA_STYLE_COLOUR('',#285989); +#300258 = CURVE_STYLE('',#300259,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300259 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300260 = OVER_RIDING_STYLED_ITEM('overriding color',(#300261),#44650, + #300143); +#300261 = PRESENTATION_STYLE_ASSIGNMENT((#300262,#300267)); +#300262 = SURFACE_STYLE_USAGE(.BOTH.,#300263); +#300263 = SURFACE_SIDE_STYLE('',(#300264)); +#300264 = SURFACE_STYLE_FILL_AREA(#300265); +#300265 = FILL_AREA_STYLE('',(#300266)); +#300266 = FILL_AREA_STYLE_COLOUR('',#285989); +#300267 = CURVE_STYLE('',#300268,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300268 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300269 = OVER_RIDING_STYLED_ITEM('overriding color',(#300270),#44682, + #300143); +#300270 = PRESENTATION_STYLE_ASSIGNMENT((#300271,#300276)); +#300271 = SURFACE_STYLE_USAGE(.BOTH.,#300272); +#300272 = SURFACE_SIDE_STYLE('',(#300273)); +#300273 = SURFACE_STYLE_FILL_AREA(#300274); +#300274 = FILL_AREA_STYLE('',(#300275)); +#300275 = FILL_AREA_STYLE_COLOUR('',#285989); +#300276 = CURVE_STYLE('',#300277,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300277 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300278 = OVER_RIDING_STYLED_ITEM('overriding color',(#300279),#44716, + #300143); +#300279 = PRESENTATION_STYLE_ASSIGNMENT((#300280,#300285)); +#300280 = SURFACE_STYLE_USAGE(.BOTH.,#300281); +#300281 = SURFACE_SIDE_STYLE('',(#300282)); +#300282 = SURFACE_STYLE_FILL_AREA(#300283); +#300283 = FILL_AREA_STYLE('',(#300284)); +#300284 = FILL_AREA_STYLE_COLOUR('',#285989); +#300285 = CURVE_STYLE('',#300286,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300286 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300287 = OVER_RIDING_STYLED_ITEM('overriding color',(#300288),#44748, + #300143); +#300288 = PRESENTATION_STYLE_ASSIGNMENT((#300289,#300294)); +#300289 = SURFACE_STYLE_USAGE(.BOTH.,#300290); +#300290 = SURFACE_SIDE_STYLE('',(#300291)); +#300291 = SURFACE_STYLE_FILL_AREA(#300292); +#300292 = FILL_AREA_STYLE('',(#300293)); +#300293 = FILL_AREA_STYLE_COLOUR('',#285989); +#300294 = CURVE_STYLE('',#300295,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300295 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300296 = OVER_RIDING_STYLED_ITEM('overriding color',(#300297),#44782, + #300143); +#300297 = PRESENTATION_STYLE_ASSIGNMENT((#300298,#300303)); +#300298 = SURFACE_STYLE_USAGE(.BOTH.,#300299); +#300299 = SURFACE_SIDE_STYLE('',(#300300)); +#300300 = SURFACE_STYLE_FILL_AREA(#300301); +#300301 = FILL_AREA_STYLE('',(#300302)); +#300302 = FILL_AREA_STYLE_COLOUR('',#285989); +#300303 = CURVE_STYLE('',#300304,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300304 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300305 = OVER_RIDING_STYLED_ITEM('overriding color',(#300306),#44814, + #300143); +#300306 = PRESENTATION_STYLE_ASSIGNMENT((#300307,#300312)); +#300307 = SURFACE_STYLE_USAGE(.BOTH.,#300308); +#300308 = SURFACE_SIDE_STYLE('',(#300309)); +#300309 = SURFACE_STYLE_FILL_AREA(#300310); +#300310 = FILL_AREA_STYLE('',(#300311)); +#300311 = FILL_AREA_STYLE_COLOUR('',#285989); +#300312 = CURVE_STYLE('',#300313,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300313 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300314 = OVER_RIDING_STYLED_ITEM('overriding color',(#300315),#44848, + #300143); +#300315 = PRESENTATION_STYLE_ASSIGNMENT((#300316,#300321)); +#300316 = SURFACE_STYLE_USAGE(.BOTH.,#300317); +#300317 = SURFACE_SIDE_STYLE('',(#300318)); +#300318 = SURFACE_STYLE_FILL_AREA(#300319); +#300319 = FILL_AREA_STYLE('',(#300320)); +#300320 = FILL_AREA_STYLE_COLOUR('',#285989); +#300321 = CURVE_STYLE('',#300322,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300322 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300323 = OVER_RIDING_STYLED_ITEM('overriding color',(#300324),#44880, + #300143); +#300324 = PRESENTATION_STYLE_ASSIGNMENT((#300325,#300330)); +#300325 = SURFACE_STYLE_USAGE(.BOTH.,#300326); +#300326 = SURFACE_SIDE_STYLE('',(#300327)); +#300327 = SURFACE_STYLE_FILL_AREA(#300328); +#300328 = FILL_AREA_STYLE('',(#300329)); +#300329 = FILL_AREA_STYLE_COLOUR('',#285989); +#300330 = CURVE_STYLE('',#300331,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300331 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300332 = STYLED_ITEM('color',(#300333),#44898); +#300333 = PRESENTATION_STYLE_ASSIGNMENT((#300334,#300339)); +#300334 = SURFACE_STYLE_USAGE(.BOTH.,#300335); +#300335 = SURFACE_SIDE_STYLE('',(#300336)); +#300336 = SURFACE_STYLE_FILL_AREA(#300337); +#300337 = FILL_AREA_STYLE('',(#300338)); +#300338 = FILL_AREA_STYLE_COLOUR('',#270350); +#300339 = CURVE_STYLE('',#300340,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300340 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300341 = STYLED_ITEM('color',(#300342),#44910); +#300342 = PRESENTATION_STYLE_ASSIGNMENT((#300343,#300348)); +#300343 = SURFACE_STYLE_USAGE(.BOTH.,#300344); +#300344 = SURFACE_SIDE_STYLE('',(#300345)); +#300345 = SURFACE_STYLE_FILL_AREA(#300346); +#300346 = FILL_AREA_STYLE('',(#300347)); +#300347 = FILL_AREA_STYLE_COLOUR('',#270350); +#300348 = CURVE_STYLE('',#300349,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300349 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300350 = STYLED_ITEM('color',(#300351),#44922); +#300351 = PRESENTATION_STYLE_ASSIGNMENT((#300352,#300357)); +#300352 = SURFACE_STYLE_USAGE(.BOTH.,#300353); +#300353 = SURFACE_SIDE_STYLE('',(#300354)); +#300354 = SURFACE_STYLE_FILL_AREA(#300355); +#300355 = FILL_AREA_STYLE('',(#300356)); +#300356 = FILL_AREA_STYLE_COLOUR('',#270350); +#300357 = CURVE_STYLE('',#300358,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300358 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300359 = STYLED_ITEM('color',(#300360),#44953); +#300360 = PRESENTATION_STYLE_ASSIGNMENT((#300361,#300366)); +#300361 = SURFACE_STYLE_USAGE(.BOTH.,#300362); +#300362 = SURFACE_SIDE_STYLE('',(#300363)); +#300363 = SURFACE_STYLE_FILL_AREA(#300364); +#300364 = FILL_AREA_STYLE('',(#300365)); +#300365 = FILL_AREA_STYLE_COLOUR('',#270350); +#300366 = CURVE_STYLE('',#300367,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300367 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300368 = STYLED_ITEM('color',(#300369),#44977); +#300369 = PRESENTATION_STYLE_ASSIGNMENT((#300370,#300375)); +#300370 = SURFACE_STYLE_USAGE(.BOTH.,#300371); +#300371 = SURFACE_SIDE_STYLE('',(#300372)); +#300372 = SURFACE_STYLE_FILL_AREA(#300373); +#300373 = FILL_AREA_STYLE('',(#300374)); +#300374 = FILL_AREA_STYLE_COLOUR('',#270350); +#300375 = CURVE_STYLE('',#300376,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300376 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300377 = STYLED_ITEM('color',(#300378),#45001); +#300378 = PRESENTATION_STYLE_ASSIGNMENT((#300379,#300384)); +#300379 = SURFACE_STYLE_USAGE(.BOTH.,#300380); +#300380 = SURFACE_SIDE_STYLE('',(#300381)); +#300381 = SURFACE_STYLE_FILL_AREA(#300382); +#300382 = FILL_AREA_STYLE('',(#300383)); +#300383 = FILL_AREA_STYLE_COLOUR('',#270350); +#300384 = CURVE_STYLE('',#300385,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300385 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300386 = STYLED_ITEM('color',(#300387),#45018); +#300387 = PRESENTATION_STYLE_ASSIGNMENT((#300388,#300393)); +#300388 = SURFACE_STYLE_USAGE(.BOTH.,#300389); +#300389 = SURFACE_SIDE_STYLE('',(#300390)); +#300390 = SURFACE_STYLE_FILL_AREA(#300391); +#300391 = FILL_AREA_STYLE('',(#300392)); +#300392 = FILL_AREA_STYLE_COLOUR('',#270350); +#300393 = CURVE_STYLE('',#300394,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300394 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300395 = STYLED_ITEM('color',(#300396),#45049); +#300396 = PRESENTATION_STYLE_ASSIGNMENT((#300397,#300402)); +#300397 = SURFACE_STYLE_USAGE(.BOTH.,#300398); +#300398 = SURFACE_SIDE_STYLE('',(#300399)); +#300399 = SURFACE_STYLE_FILL_AREA(#300400); +#300400 = FILL_AREA_STYLE('',(#300401)); +#300401 = FILL_AREA_STYLE_COLOUR('',#270350); +#300402 = CURVE_STYLE('',#300403,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300403 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300404 = STYLED_ITEM('color',(#300405),#45073); +#300405 = PRESENTATION_STYLE_ASSIGNMENT((#300406,#300411)); +#300406 = SURFACE_STYLE_USAGE(.BOTH.,#300407); +#300407 = SURFACE_SIDE_STYLE('',(#300408)); +#300408 = SURFACE_STYLE_FILL_AREA(#300409); +#300409 = FILL_AREA_STYLE('',(#300410)); +#300410 = FILL_AREA_STYLE_COLOUR('',#270350); +#300411 = CURVE_STYLE('',#300412,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300412 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300413 = STYLED_ITEM('color',(#300414),#45097); +#300414 = PRESENTATION_STYLE_ASSIGNMENT((#300415,#300420)); +#300415 = SURFACE_STYLE_USAGE(.BOTH.,#300416); +#300416 = SURFACE_SIDE_STYLE('',(#300417)); +#300417 = SURFACE_STYLE_FILL_AREA(#300418); +#300418 = FILL_AREA_STYLE('',(#300419)); +#300419 = FILL_AREA_STYLE_COLOUR('',#270350); +#300420 = CURVE_STYLE('',#300421,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300421 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300422 = STYLED_ITEM('color',(#300423),#45114); +#300423 = PRESENTATION_STYLE_ASSIGNMENT((#300424,#300429)); +#300424 = SURFACE_STYLE_USAGE(.BOTH.,#300425); +#300425 = SURFACE_SIDE_STYLE('',(#300426)); +#300426 = SURFACE_STYLE_FILL_AREA(#300427); +#300427 = FILL_AREA_STYLE('',(#300428)); +#300428 = FILL_AREA_STYLE_COLOUR('',#270350); +#300429 = CURVE_STYLE('',#300430,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300430 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300431 = STYLED_ITEM('color',(#300432),#45145); +#300432 = PRESENTATION_STYLE_ASSIGNMENT((#300433,#300438)); +#300433 = SURFACE_STYLE_USAGE(.BOTH.,#300434); +#300434 = SURFACE_SIDE_STYLE('',(#300435)); +#300435 = SURFACE_STYLE_FILL_AREA(#300436); +#300436 = FILL_AREA_STYLE('',(#300437)); +#300437 = FILL_AREA_STYLE_COLOUR('',#270350); +#300438 = CURVE_STYLE('',#300439,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300440 = STYLED_ITEM('color',(#300441),#45169); +#300441 = PRESENTATION_STYLE_ASSIGNMENT((#300442,#300447)); +#300442 = SURFACE_STYLE_USAGE(.BOTH.,#300443); +#300443 = SURFACE_SIDE_STYLE('',(#300444)); +#300444 = SURFACE_STYLE_FILL_AREA(#300445); +#300445 = FILL_AREA_STYLE('',(#300446)); +#300446 = FILL_AREA_STYLE_COLOUR('',#270350); +#300447 = CURVE_STYLE('',#300448,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300448 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300449 = STYLED_ITEM('color',(#300450),#45193); +#300450 = PRESENTATION_STYLE_ASSIGNMENT((#300451,#300456)); +#300451 = SURFACE_STYLE_USAGE(.BOTH.,#300452); +#300452 = SURFACE_SIDE_STYLE('',(#300453)); +#300453 = SURFACE_STYLE_FILL_AREA(#300454); +#300454 = FILL_AREA_STYLE('',(#300455)); +#300455 = FILL_AREA_STYLE_COLOUR('',#270350); +#300456 = CURVE_STYLE('',#300457,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300457 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300458 = STYLED_ITEM('color',(#300459),#45210); +#300459 = PRESENTATION_STYLE_ASSIGNMENT((#300460,#300465)); +#300460 = SURFACE_STYLE_USAGE(.BOTH.,#300461); +#300461 = SURFACE_SIDE_STYLE('',(#300462)); +#300462 = SURFACE_STYLE_FILL_AREA(#300463); +#300463 = FILL_AREA_STYLE('',(#300464)); +#300464 = FILL_AREA_STYLE_COLOUR('',#270350); +#300465 = CURVE_STYLE('',#300466,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300466 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300467 = STYLED_ITEM('color',(#300468),#45241); +#300468 = PRESENTATION_STYLE_ASSIGNMENT((#300469,#300474)); +#300469 = SURFACE_STYLE_USAGE(.BOTH.,#300470); +#300470 = SURFACE_SIDE_STYLE('',(#300471)); +#300471 = SURFACE_STYLE_FILL_AREA(#300472); +#300472 = FILL_AREA_STYLE('',(#300473)); +#300473 = FILL_AREA_STYLE_COLOUR('',#270350); +#300474 = CURVE_STYLE('',#300475,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300475 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300476 = STYLED_ITEM('color',(#300477),#45265); +#300477 = PRESENTATION_STYLE_ASSIGNMENT((#300478,#300483)); +#300478 = SURFACE_STYLE_USAGE(.BOTH.,#300479); +#300479 = SURFACE_SIDE_STYLE('',(#300480)); +#300480 = SURFACE_STYLE_FILL_AREA(#300481); +#300481 = FILL_AREA_STYLE('',(#300482)); +#300482 = FILL_AREA_STYLE_COLOUR('',#270350); +#300483 = CURVE_STYLE('',#300484,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300484 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300485 = STYLED_ITEM('color',(#300486),#45289); +#300486 = PRESENTATION_STYLE_ASSIGNMENT((#300487,#300492)); +#300487 = SURFACE_STYLE_USAGE(.BOTH.,#300488); +#300488 = SURFACE_SIDE_STYLE('',(#300489)); +#300489 = SURFACE_STYLE_FILL_AREA(#300490); +#300490 = FILL_AREA_STYLE('',(#300491)); +#300491 = FILL_AREA_STYLE_COLOUR('',#270350); +#300492 = CURVE_STYLE('',#300493,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300493 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300494 = STYLED_ITEM('color',(#300495),#45306); +#300495 = PRESENTATION_STYLE_ASSIGNMENT((#300496,#300501)); +#300496 = SURFACE_STYLE_USAGE(.BOTH.,#300497); +#300497 = SURFACE_SIDE_STYLE('',(#300498)); +#300498 = SURFACE_STYLE_FILL_AREA(#300499); +#300499 = FILL_AREA_STYLE('',(#300500)); +#300500 = FILL_AREA_STYLE_COLOUR('',#270350); +#300501 = CURVE_STYLE('',#300502,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300502 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300503 = STYLED_ITEM('color',(#300504),#45337); +#300504 = PRESENTATION_STYLE_ASSIGNMENT((#300505,#300510)); +#300505 = SURFACE_STYLE_USAGE(.BOTH.,#300506); +#300506 = SURFACE_SIDE_STYLE('',(#300507)); +#300507 = SURFACE_STYLE_FILL_AREA(#300508); +#300508 = FILL_AREA_STYLE('',(#300509)); +#300509 = FILL_AREA_STYLE_COLOUR('',#270350); +#300510 = CURVE_STYLE('',#300511,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300511 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300512 = STYLED_ITEM('color',(#300513),#45361); +#300513 = PRESENTATION_STYLE_ASSIGNMENT((#300514,#300519)); +#300514 = SURFACE_STYLE_USAGE(.BOTH.,#300515); +#300515 = SURFACE_SIDE_STYLE('',(#300516)); +#300516 = SURFACE_STYLE_FILL_AREA(#300517); +#300517 = FILL_AREA_STYLE('',(#300518)); +#300518 = FILL_AREA_STYLE_COLOUR('',#270350); +#300519 = CURVE_STYLE('',#300520,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300520 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300521 = STYLED_ITEM('color',(#300522),#45385); +#300522 = PRESENTATION_STYLE_ASSIGNMENT((#300523,#300528)); +#300523 = SURFACE_STYLE_USAGE(.BOTH.,#300524); +#300524 = SURFACE_SIDE_STYLE('',(#300525)); +#300525 = SURFACE_STYLE_FILL_AREA(#300526); +#300526 = FILL_AREA_STYLE('',(#300527)); +#300527 = FILL_AREA_STYLE_COLOUR('',#270350); +#300528 = CURVE_STYLE('',#300529,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300529 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300530 = STYLED_ITEM('color',(#300531),#45402); +#300531 = PRESENTATION_STYLE_ASSIGNMENT((#300532,#300537)); +#300532 = SURFACE_STYLE_USAGE(.BOTH.,#300533); +#300533 = SURFACE_SIDE_STYLE('',(#300534)); +#300534 = SURFACE_STYLE_FILL_AREA(#300535); +#300535 = FILL_AREA_STYLE('',(#300536)); +#300536 = FILL_AREA_STYLE_COLOUR('',#270350); +#300537 = CURVE_STYLE('',#300538,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300538 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300539 = STYLED_ITEM('color',(#300540),#45433); +#300540 = PRESENTATION_STYLE_ASSIGNMENT((#300541,#300546)); +#300541 = SURFACE_STYLE_USAGE(.BOTH.,#300542); +#300542 = SURFACE_SIDE_STYLE('',(#300543)); +#300543 = SURFACE_STYLE_FILL_AREA(#300544); +#300544 = FILL_AREA_STYLE('',(#300545)); +#300545 = FILL_AREA_STYLE_COLOUR('',#270350); +#300546 = CURVE_STYLE('',#300547,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300547 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300548 = STYLED_ITEM('color',(#300549),#45457); +#300549 = PRESENTATION_STYLE_ASSIGNMENT((#300550,#300555)); +#300550 = SURFACE_STYLE_USAGE(.BOTH.,#300551); +#300551 = SURFACE_SIDE_STYLE('',(#300552)); +#300552 = SURFACE_STYLE_FILL_AREA(#300553); +#300553 = FILL_AREA_STYLE('',(#300554)); +#300554 = FILL_AREA_STYLE_COLOUR('',#270350); +#300555 = CURVE_STYLE('',#300556,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300556 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300557 = STYLED_ITEM('color',(#300558),#45481); +#300558 = PRESENTATION_STYLE_ASSIGNMENT((#300559,#300564)); +#300559 = SURFACE_STYLE_USAGE(.BOTH.,#300560); +#300560 = SURFACE_SIDE_STYLE('',(#300561)); +#300561 = SURFACE_STYLE_FILL_AREA(#300562); +#300562 = FILL_AREA_STYLE('',(#300563)); +#300563 = FILL_AREA_STYLE_COLOUR('',#270350); +#300564 = CURVE_STYLE('',#300565,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300565 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300566 = STYLED_ITEM('color',(#300567),#45498); +#300567 = PRESENTATION_STYLE_ASSIGNMENT((#300568,#300573)); +#300568 = SURFACE_STYLE_USAGE(.BOTH.,#300569); +#300569 = SURFACE_SIDE_STYLE('',(#300570)); +#300570 = SURFACE_STYLE_FILL_AREA(#300571); +#300571 = FILL_AREA_STYLE('',(#300572)); +#300572 = FILL_AREA_STYLE_COLOUR('',#270350); +#300573 = CURVE_STYLE('',#300574,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300574 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300575 = STYLED_ITEM('color',(#300576),#45529); +#300576 = PRESENTATION_STYLE_ASSIGNMENT((#300577,#300582)); +#300577 = SURFACE_STYLE_USAGE(.BOTH.,#300578); +#300578 = SURFACE_SIDE_STYLE('',(#300579)); +#300579 = SURFACE_STYLE_FILL_AREA(#300580); +#300580 = FILL_AREA_STYLE('',(#300581)); +#300581 = FILL_AREA_STYLE_COLOUR('',#270350); +#300582 = CURVE_STYLE('',#300583,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300583 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300584 = STYLED_ITEM('color',(#300585),#45553); +#300585 = PRESENTATION_STYLE_ASSIGNMENT((#300586,#300591)); +#300586 = SURFACE_STYLE_USAGE(.BOTH.,#300587); +#300587 = SURFACE_SIDE_STYLE('',(#300588)); +#300588 = SURFACE_STYLE_FILL_AREA(#300589); +#300589 = FILL_AREA_STYLE('',(#300590)); +#300590 = FILL_AREA_STYLE_COLOUR('',#270350); +#300591 = CURVE_STYLE('',#300592,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300592 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300593 = STYLED_ITEM('color',(#300594),#45577); +#300594 = PRESENTATION_STYLE_ASSIGNMENT((#300595,#300600)); +#300595 = SURFACE_STYLE_USAGE(.BOTH.,#300596); +#300596 = SURFACE_SIDE_STYLE('',(#300597)); +#300597 = SURFACE_STYLE_FILL_AREA(#300598); +#300598 = FILL_AREA_STYLE('',(#300599)); +#300599 = FILL_AREA_STYLE_COLOUR('',#270350); +#300600 = CURVE_STYLE('',#300601,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300601 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300602 = STYLED_ITEM('color',(#300603),#45594); +#300603 = PRESENTATION_STYLE_ASSIGNMENT((#300604,#300609)); +#300604 = SURFACE_STYLE_USAGE(.BOTH.,#300605); +#300605 = SURFACE_SIDE_STYLE('',(#300606)); +#300606 = SURFACE_STYLE_FILL_AREA(#300607); +#300607 = FILL_AREA_STYLE('',(#300608)); +#300608 = FILL_AREA_STYLE_COLOUR('',#270350); +#300609 = CURVE_STYLE('',#300610,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300610 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300611 = STYLED_ITEM('color',(#300612),#45625); +#300612 = PRESENTATION_STYLE_ASSIGNMENT((#300613,#300618)); +#300613 = SURFACE_STYLE_USAGE(.BOTH.,#300614); +#300614 = SURFACE_SIDE_STYLE('',(#300615)); +#300615 = SURFACE_STYLE_FILL_AREA(#300616); +#300616 = FILL_AREA_STYLE('',(#300617)); +#300617 = FILL_AREA_STYLE_COLOUR('',#270350); +#300618 = CURVE_STYLE('',#300619,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300619 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300620 = STYLED_ITEM('color',(#300621),#45649); +#300621 = PRESENTATION_STYLE_ASSIGNMENT((#300622,#300627)); +#300622 = SURFACE_STYLE_USAGE(.BOTH.,#300623); +#300623 = SURFACE_SIDE_STYLE('',(#300624)); +#300624 = SURFACE_STYLE_FILL_AREA(#300625); +#300625 = FILL_AREA_STYLE('',(#300626)); +#300626 = FILL_AREA_STYLE_COLOUR('',#270350); +#300627 = CURVE_STYLE('',#300628,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300628 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300629 = STYLED_ITEM('color',(#300630),#45673); +#300630 = PRESENTATION_STYLE_ASSIGNMENT((#300631,#300636)); +#300631 = SURFACE_STYLE_USAGE(.BOTH.,#300632); +#300632 = SURFACE_SIDE_STYLE('',(#300633)); +#300633 = SURFACE_STYLE_FILL_AREA(#300634); +#300634 = FILL_AREA_STYLE('',(#300635)); +#300635 = FILL_AREA_STYLE_COLOUR('',#270350); +#300636 = CURVE_STYLE('',#300637,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300637 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300638 = STYLED_ITEM('color',(#300639),#45690); +#300639 = PRESENTATION_STYLE_ASSIGNMENT((#300640,#300645)); +#300640 = SURFACE_STYLE_USAGE(.BOTH.,#300641); +#300641 = SURFACE_SIDE_STYLE('',(#300642)); +#300642 = SURFACE_STYLE_FILL_AREA(#300643); +#300643 = FILL_AREA_STYLE('',(#300644)); +#300644 = FILL_AREA_STYLE_COLOUR('',#270350); +#300645 = CURVE_STYLE('',#300646,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300646 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300647 = STYLED_ITEM('color',(#300648),#45721); +#300648 = PRESENTATION_STYLE_ASSIGNMENT((#300649,#300654)); +#300649 = SURFACE_STYLE_USAGE(.BOTH.,#300650); +#300650 = SURFACE_SIDE_STYLE('',(#300651)); +#300651 = SURFACE_STYLE_FILL_AREA(#300652); +#300652 = FILL_AREA_STYLE('',(#300653)); +#300653 = FILL_AREA_STYLE_COLOUR('',#270350); +#300654 = CURVE_STYLE('',#300655,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300655 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300656 = STYLED_ITEM('color',(#300657),#45745); +#300657 = PRESENTATION_STYLE_ASSIGNMENT((#300658,#300663)); +#300658 = SURFACE_STYLE_USAGE(.BOTH.,#300659); +#300659 = SURFACE_SIDE_STYLE('',(#300660)); +#300660 = SURFACE_STYLE_FILL_AREA(#300661); +#300661 = FILL_AREA_STYLE('',(#300662)); +#300662 = FILL_AREA_STYLE_COLOUR('',#270350); +#300663 = CURVE_STYLE('',#300664,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300664 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300665 = STYLED_ITEM('color',(#300666),#45769); +#300666 = PRESENTATION_STYLE_ASSIGNMENT((#300667,#300672)); +#300667 = SURFACE_STYLE_USAGE(.BOTH.,#300668); +#300668 = SURFACE_SIDE_STYLE('',(#300669)); +#300669 = SURFACE_STYLE_FILL_AREA(#300670); +#300670 = FILL_AREA_STYLE('',(#300671)); +#300671 = FILL_AREA_STYLE_COLOUR('',#270350); +#300672 = CURVE_STYLE('',#300673,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300673 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300674 = STYLED_ITEM('color',(#300675),#45786); +#300675 = PRESENTATION_STYLE_ASSIGNMENT((#300676,#300681)); +#300676 = SURFACE_STYLE_USAGE(.BOTH.,#300677); +#300677 = SURFACE_SIDE_STYLE('',(#300678)); +#300678 = SURFACE_STYLE_FILL_AREA(#300679); +#300679 = FILL_AREA_STYLE('',(#300680)); +#300680 = FILL_AREA_STYLE_COLOUR('',#270350); +#300681 = CURVE_STYLE('',#300682,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300682 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300683 = STYLED_ITEM('color',(#300684),#45817); +#300684 = PRESENTATION_STYLE_ASSIGNMENT((#300685,#300690)); +#300685 = SURFACE_STYLE_USAGE(.BOTH.,#300686); +#300686 = SURFACE_SIDE_STYLE('',(#300687)); +#300687 = SURFACE_STYLE_FILL_AREA(#300688); +#300688 = FILL_AREA_STYLE('',(#300689)); +#300689 = FILL_AREA_STYLE_COLOUR('',#270350); +#300690 = CURVE_STYLE('',#300691,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300691 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300692 = STYLED_ITEM('color',(#300693),#45841); +#300693 = PRESENTATION_STYLE_ASSIGNMENT((#300694,#300699)); +#300694 = SURFACE_STYLE_USAGE(.BOTH.,#300695); +#300695 = SURFACE_SIDE_STYLE('',(#300696)); +#300696 = SURFACE_STYLE_FILL_AREA(#300697); +#300697 = FILL_AREA_STYLE('',(#300698)); +#300698 = FILL_AREA_STYLE_COLOUR('',#270350); +#300699 = CURVE_STYLE('',#300700,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300700 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300701 = STYLED_ITEM('color',(#300702),#45865); +#300702 = PRESENTATION_STYLE_ASSIGNMENT((#300703,#300708)); +#300703 = SURFACE_STYLE_USAGE(.BOTH.,#300704); +#300704 = SURFACE_SIDE_STYLE('',(#300705)); +#300705 = SURFACE_STYLE_FILL_AREA(#300706); +#300706 = FILL_AREA_STYLE('',(#300707)); +#300707 = FILL_AREA_STYLE_COLOUR('',#270350); +#300708 = CURVE_STYLE('',#300709,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#300709 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300710 = STYLED_ITEM('color',(#300711),#45882); +#300711 = PRESENTATION_STYLE_ASSIGNMENT((#300712,#300717)); +#300712 = SURFACE_STYLE_USAGE(.BOTH.,#300713); +#300713 = SURFACE_SIDE_STYLE('',(#300714)); +#300714 = SURFACE_STYLE_FILL_AREA(#300715); +#300715 = FILL_AREA_STYLE('',(#300716)); +#300716 = FILL_AREA_STYLE_COLOUR('',#285989); +#300717 = CURVE_STYLE('',#300718,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300718 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300719 = STYLED_ITEM('color',(#300720),#45899); +#300720 = PRESENTATION_STYLE_ASSIGNMENT((#300721,#300726)); +#300721 = SURFACE_STYLE_USAGE(.BOTH.,#300722); +#300722 = SURFACE_SIDE_STYLE('',(#300723)); +#300723 = SURFACE_STYLE_FILL_AREA(#300724); +#300724 = FILL_AREA_STYLE('',(#300725)); +#300725 = FILL_AREA_STYLE_COLOUR('',#285989); +#300726 = CURVE_STYLE('',#300727,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300727 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300728 = STYLED_ITEM('color',(#300729),#45946); +#300729 = PRESENTATION_STYLE_ASSIGNMENT((#300730,#300735)); +#300730 = SURFACE_STYLE_USAGE(.BOTH.,#300731); +#300731 = SURFACE_SIDE_STYLE('',(#300732)); +#300732 = SURFACE_STYLE_FILL_AREA(#300733); +#300733 = FILL_AREA_STYLE('',(#300734)); +#300734 = FILL_AREA_STYLE_COLOUR('',#285989); +#300735 = CURVE_STYLE('',#300736,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300736 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300737 = STYLED_ITEM('color',(#300738),#45963); +#300738 = PRESENTATION_STYLE_ASSIGNMENT((#300739,#300744)); +#300739 = SURFACE_STYLE_USAGE(.BOTH.,#300740); +#300740 = SURFACE_SIDE_STYLE('',(#300741)); +#300741 = SURFACE_STYLE_FILL_AREA(#300742); +#300742 = FILL_AREA_STYLE('',(#300743)); +#300743 = FILL_AREA_STYLE_COLOUR('',#285989); +#300744 = CURVE_STYLE('',#300745,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300745 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300746 = STYLED_ITEM('color',(#300747),#46010); +#300747 = PRESENTATION_STYLE_ASSIGNMENT((#300748,#300753)); +#300748 = SURFACE_STYLE_USAGE(.BOTH.,#300749); +#300749 = SURFACE_SIDE_STYLE('',(#300750)); +#300750 = SURFACE_STYLE_FILL_AREA(#300751); +#300751 = FILL_AREA_STYLE('',(#300752)); +#300752 = FILL_AREA_STYLE_COLOUR('',#285989); +#300753 = CURVE_STYLE('',#300754,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300754 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300755 = STYLED_ITEM('color',(#300756),#46027); +#300756 = PRESENTATION_STYLE_ASSIGNMENT((#300757,#300762)); +#300757 = SURFACE_STYLE_USAGE(.BOTH.,#300758); +#300758 = SURFACE_SIDE_STYLE('',(#300759)); +#300759 = SURFACE_STYLE_FILL_AREA(#300760); +#300760 = FILL_AREA_STYLE('',(#300761)); +#300761 = FILL_AREA_STYLE_COLOUR('',#285989); +#300762 = CURVE_STYLE('',#300763,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300763 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300764 = STYLED_ITEM('color',(#300765),#46074); +#300765 = PRESENTATION_STYLE_ASSIGNMENT((#300766,#300771)); +#300766 = SURFACE_STYLE_USAGE(.BOTH.,#300767); +#300767 = SURFACE_SIDE_STYLE('',(#300768)); +#300768 = SURFACE_STYLE_FILL_AREA(#300769); +#300769 = FILL_AREA_STYLE('',(#300770)); +#300770 = FILL_AREA_STYLE_COLOUR('',#285989); +#300771 = CURVE_STYLE('',#300772,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300772 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300773 = STYLED_ITEM('color',(#300774),#46091); +#300774 = PRESENTATION_STYLE_ASSIGNMENT((#300775,#300780)); +#300775 = SURFACE_STYLE_USAGE(.BOTH.,#300776); +#300776 = SURFACE_SIDE_STYLE('',(#300777)); +#300777 = SURFACE_STYLE_FILL_AREA(#300778); +#300778 = FILL_AREA_STYLE('',(#300779)); +#300779 = FILL_AREA_STYLE_COLOUR('',#285989); +#300780 = CURVE_STYLE('',#300781,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300781 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300782 = STYLED_ITEM('color',(#300783),#46138); +#300783 = PRESENTATION_STYLE_ASSIGNMENT((#300784,#300789)); +#300784 = SURFACE_STYLE_USAGE(.BOTH.,#300785); +#300785 = SURFACE_SIDE_STYLE('',(#300786)); +#300786 = SURFACE_STYLE_FILL_AREA(#300787); +#300787 = FILL_AREA_STYLE('',(#300788)); +#300788 = FILL_AREA_STYLE_COLOUR('',#285989); +#300789 = CURVE_STYLE('',#300790,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300790 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300791 = STYLED_ITEM('color',(#300792),#46155); +#300792 = PRESENTATION_STYLE_ASSIGNMENT((#300793,#300798)); +#300793 = SURFACE_STYLE_USAGE(.BOTH.,#300794); +#300794 = SURFACE_SIDE_STYLE('',(#300795)); +#300795 = SURFACE_STYLE_FILL_AREA(#300796); +#300796 = FILL_AREA_STYLE('',(#300797)); +#300797 = FILL_AREA_STYLE_COLOUR('',#285989); +#300798 = CURVE_STYLE('',#300799,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300799 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300800 = STYLED_ITEM('color',(#300801),#46202); +#300801 = PRESENTATION_STYLE_ASSIGNMENT((#300802,#300807)); +#300802 = SURFACE_STYLE_USAGE(.BOTH.,#300803); +#300803 = SURFACE_SIDE_STYLE('',(#300804)); +#300804 = SURFACE_STYLE_FILL_AREA(#300805); +#300805 = FILL_AREA_STYLE('',(#300806)); +#300806 = FILL_AREA_STYLE_COLOUR('',#285989); +#300807 = CURVE_STYLE('',#300808,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300808 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300809 = STYLED_ITEM('color',(#300810),#46219); +#300810 = PRESENTATION_STYLE_ASSIGNMENT((#300811,#300816)); +#300811 = SURFACE_STYLE_USAGE(.BOTH.,#300812); +#300812 = SURFACE_SIDE_STYLE('',(#300813)); +#300813 = SURFACE_STYLE_FILL_AREA(#300814); +#300814 = FILL_AREA_STYLE('',(#300815)); +#300815 = FILL_AREA_STYLE_COLOUR('',#285989); +#300816 = CURVE_STYLE('',#300817,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300817 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300818 = STYLED_ITEM('color',(#300819),#46266); +#300819 = PRESENTATION_STYLE_ASSIGNMENT((#300820,#300825)); +#300820 = SURFACE_STYLE_USAGE(.BOTH.,#300821); +#300821 = SURFACE_SIDE_STYLE('',(#300822)); +#300822 = SURFACE_STYLE_FILL_AREA(#300823); +#300823 = FILL_AREA_STYLE('',(#300824)); +#300824 = FILL_AREA_STYLE_COLOUR('',#285989); +#300825 = CURVE_STYLE('',#300826,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300827 = STYLED_ITEM('color',(#300828),#46283); +#300828 = PRESENTATION_STYLE_ASSIGNMENT((#300829,#300834)); +#300829 = SURFACE_STYLE_USAGE(.BOTH.,#300830); +#300830 = SURFACE_SIDE_STYLE('',(#300831)); +#300831 = SURFACE_STYLE_FILL_AREA(#300832); +#300832 = FILL_AREA_STYLE('',(#300833)); +#300833 = FILL_AREA_STYLE_COLOUR('',#285989); +#300834 = CURVE_STYLE('',#300835,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300835 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300836 = STYLED_ITEM('color',(#300837),#46330); +#300837 = PRESENTATION_STYLE_ASSIGNMENT((#300838,#300843)); +#300838 = SURFACE_STYLE_USAGE(.BOTH.,#300839); +#300839 = SURFACE_SIDE_STYLE('',(#300840)); +#300840 = SURFACE_STYLE_FILL_AREA(#300841); +#300841 = FILL_AREA_STYLE('',(#300842)); +#300842 = FILL_AREA_STYLE_COLOUR('',#285989); +#300843 = CURVE_STYLE('',#300844,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300844 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300845 = STYLED_ITEM('color',(#300846),#46347); +#300846 = PRESENTATION_STYLE_ASSIGNMENT((#300847,#300852)); +#300847 = SURFACE_STYLE_USAGE(.BOTH.,#300848); +#300848 = SURFACE_SIDE_STYLE('',(#300849)); +#300849 = SURFACE_STYLE_FILL_AREA(#300850); +#300850 = FILL_AREA_STYLE('',(#300851)); +#300851 = FILL_AREA_STYLE_COLOUR('',#285989); +#300852 = CURVE_STYLE('',#300853,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300853 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300854 = STYLED_ITEM('color',(#300855),#46394); +#300855 = PRESENTATION_STYLE_ASSIGNMENT((#300856,#300861)); +#300856 = SURFACE_STYLE_USAGE(.BOTH.,#300857); +#300857 = SURFACE_SIDE_STYLE('',(#300858)); +#300858 = SURFACE_STYLE_FILL_AREA(#300859); +#300859 = FILL_AREA_STYLE('',(#300860)); +#300860 = FILL_AREA_STYLE_COLOUR('',#285989); +#300861 = CURVE_STYLE('',#300862,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300862 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300863 = STYLED_ITEM('color',(#300864),#46411); +#300864 = PRESENTATION_STYLE_ASSIGNMENT((#300865,#300870)); +#300865 = SURFACE_STYLE_USAGE(.BOTH.,#300866); +#300866 = SURFACE_SIDE_STYLE('',(#300867)); +#300867 = SURFACE_STYLE_FILL_AREA(#300868); +#300868 = FILL_AREA_STYLE('',(#300869)); +#300869 = FILL_AREA_STYLE_COLOUR('',#285989); +#300870 = CURVE_STYLE('',#300871,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300871 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300872 = STYLED_ITEM('color',(#300873),#46458); +#300873 = PRESENTATION_STYLE_ASSIGNMENT((#300874,#300879)); +#300874 = SURFACE_STYLE_USAGE(.BOTH.,#300875); +#300875 = SURFACE_SIDE_STYLE('',(#300876)); +#300876 = SURFACE_STYLE_FILL_AREA(#300877); +#300877 = FILL_AREA_STYLE('',(#300878)); +#300878 = FILL_AREA_STYLE_COLOUR('',#285989); +#300879 = CURVE_STYLE('',#300880,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300880 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300881 = STYLED_ITEM('color',(#300882),#46475); +#300882 = PRESENTATION_STYLE_ASSIGNMENT((#300883,#300888)); +#300883 = SURFACE_STYLE_USAGE(.BOTH.,#300884); +#300884 = SURFACE_SIDE_STYLE('',(#300885)); +#300885 = SURFACE_STYLE_FILL_AREA(#300886); +#300886 = FILL_AREA_STYLE('',(#300887)); +#300887 = FILL_AREA_STYLE_COLOUR('',#285989); +#300888 = CURVE_STYLE('',#300889,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300889 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300890 = STYLED_ITEM('color',(#300891),#46522); +#300891 = PRESENTATION_STYLE_ASSIGNMENT((#300892,#300897)); +#300892 = SURFACE_STYLE_USAGE(.BOTH.,#300893); +#300893 = SURFACE_SIDE_STYLE('',(#300894)); +#300894 = SURFACE_STYLE_FILL_AREA(#300895); +#300895 = FILL_AREA_STYLE('',(#300896)); +#300896 = FILL_AREA_STYLE_COLOUR('',#285989); +#300897 = CURVE_STYLE('',#300898,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300898 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300899 = STYLED_ITEM('color',(#300900),#46539); +#300900 = PRESENTATION_STYLE_ASSIGNMENT((#300901,#300906)); +#300901 = SURFACE_STYLE_USAGE(.BOTH.,#300902); +#300902 = SURFACE_SIDE_STYLE('',(#300903)); +#300903 = SURFACE_STYLE_FILL_AREA(#300904); +#300904 = FILL_AREA_STYLE('',(#300905)); +#300905 = FILL_AREA_STYLE_COLOUR('',#285989); +#300906 = CURVE_STYLE('',#300907,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300907 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300908 = STYLED_ITEM('color',(#300909),#46586); +#300909 = PRESENTATION_STYLE_ASSIGNMENT((#300910,#300915)); +#300910 = SURFACE_STYLE_USAGE(.BOTH.,#300911); +#300911 = SURFACE_SIDE_STYLE('',(#300912)); +#300912 = SURFACE_STYLE_FILL_AREA(#300913); +#300913 = FILL_AREA_STYLE('',(#300914)); +#300914 = FILL_AREA_STYLE_COLOUR('',#285989); +#300915 = CURVE_STYLE('',#300916,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300916 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300917 = STYLED_ITEM('color',(#300918),#46603); +#300918 = PRESENTATION_STYLE_ASSIGNMENT((#300919,#300924)); +#300919 = SURFACE_STYLE_USAGE(.BOTH.,#300920); +#300920 = SURFACE_SIDE_STYLE('',(#300921)); +#300921 = SURFACE_STYLE_FILL_AREA(#300922); +#300922 = FILL_AREA_STYLE('',(#300923)); +#300923 = FILL_AREA_STYLE_COLOUR('',#285989); +#300924 = CURVE_STYLE('',#300925,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300925 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300926 = STYLED_ITEM('color',(#300927),#46650); +#300927 = PRESENTATION_STYLE_ASSIGNMENT((#300928,#300933)); +#300928 = SURFACE_STYLE_USAGE(.BOTH.,#300929); +#300929 = SURFACE_SIDE_STYLE('',(#300930)); +#300930 = SURFACE_STYLE_FILL_AREA(#300931); +#300931 = FILL_AREA_STYLE('',(#300932)); +#300932 = FILL_AREA_STYLE_COLOUR('',#285989); +#300933 = CURVE_STYLE('',#300934,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300934 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300935 = STYLED_ITEM('color',(#300936),#46667); +#300936 = PRESENTATION_STYLE_ASSIGNMENT((#300937,#300942)); +#300937 = SURFACE_STYLE_USAGE(.BOTH.,#300938); +#300938 = SURFACE_SIDE_STYLE('',(#300939)); +#300939 = SURFACE_STYLE_FILL_AREA(#300940); +#300940 = FILL_AREA_STYLE('',(#300941)); +#300941 = FILL_AREA_STYLE_COLOUR('',#285989); +#300942 = CURVE_STYLE('',#300943,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300943 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300944 = STYLED_ITEM('color',(#300945),#46714); +#300945 = PRESENTATION_STYLE_ASSIGNMENT((#300946,#300951)); +#300946 = SURFACE_STYLE_USAGE(.BOTH.,#300947); +#300947 = SURFACE_SIDE_STYLE('',(#300948)); +#300948 = SURFACE_STYLE_FILL_AREA(#300949); +#300949 = FILL_AREA_STYLE('',(#300950)); +#300950 = FILL_AREA_STYLE_COLOUR('',#285989); +#300951 = CURVE_STYLE('',#300952,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300952 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300953 = STYLED_ITEM('color',(#300954),#46731); +#300954 = PRESENTATION_STYLE_ASSIGNMENT((#300955,#300960)); +#300955 = SURFACE_STYLE_USAGE(.BOTH.,#300956); +#300956 = SURFACE_SIDE_STYLE('',(#300957)); +#300957 = SURFACE_STYLE_FILL_AREA(#300958); +#300958 = FILL_AREA_STYLE('',(#300959)); +#300959 = FILL_AREA_STYLE_COLOUR('',#285989); +#300960 = CURVE_STYLE('',#300961,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300961 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300962 = STYLED_ITEM('color',(#300963),#46778); +#300963 = PRESENTATION_STYLE_ASSIGNMENT((#300964,#300969)); +#300964 = SURFACE_STYLE_USAGE(.BOTH.,#300965); +#300965 = SURFACE_SIDE_STYLE('',(#300966)); +#300966 = SURFACE_STYLE_FILL_AREA(#300967); +#300967 = FILL_AREA_STYLE('',(#300968)); +#300968 = FILL_AREA_STYLE_COLOUR('',#285989); +#300969 = CURVE_STYLE('',#300970,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300970 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300971 = STYLED_ITEM('color',(#300972),#46795); +#300972 = PRESENTATION_STYLE_ASSIGNMENT((#300973,#300978)); +#300973 = SURFACE_STYLE_USAGE(.BOTH.,#300974); +#300974 = SURFACE_SIDE_STYLE('',(#300975)); +#300975 = SURFACE_STYLE_FILL_AREA(#300976); +#300976 = FILL_AREA_STYLE('',(#300977)); +#300977 = FILL_AREA_STYLE_COLOUR('',#285989); +#300978 = CURVE_STYLE('',#300979,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300980 = STYLED_ITEM('color',(#300981),#46842); +#300981 = PRESENTATION_STYLE_ASSIGNMENT((#300982,#300987)); +#300982 = SURFACE_STYLE_USAGE(.BOTH.,#300983); +#300983 = SURFACE_SIDE_STYLE('',(#300984)); +#300984 = SURFACE_STYLE_FILL_AREA(#300985); +#300985 = FILL_AREA_STYLE('',(#300986)); +#300986 = FILL_AREA_STYLE_COLOUR('',#285989); +#300987 = CURVE_STYLE('',#300988,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300988 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300989 = STYLED_ITEM('color',(#300990),#46859); +#300990 = PRESENTATION_STYLE_ASSIGNMENT((#300991,#300996)); +#300991 = SURFACE_STYLE_USAGE(.BOTH.,#300992); +#300992 = SURFACE_SIDE_STYLE('',(#300993)); +#300993 = SURFACE_STYLE_FILL_AREA(#300994); +#300994 = FILL_AREA_STYLE('',(#300995)); +#300995 = FILL_AREA_STYLE_COLOUR('',#285989); +#300996 = CURVE_STYLE('',#300997,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#300997 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#300998 = STYLED_ITEM('color',(#300999),#46906); +#300999 = PRESENTATION_STYLE_ASSIGNMENT((#301000,#301005)); +#301000 = SURFACE_STYLE_USAGE(.BOTH.,#301001); +#301001 = SURFACE_SIDE_STYLE('',(#301002)); +#301002 = SURFACE_STYLE_FILL_AREA(#301003); +#301003 = FILL_AREA_STYLE('',(#301004)); +#301004 = FILL_AREA_STYLE_COLOUR('',#285989); +#301005 = CURVE_STYLE('',#301006,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301006 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301007 = STYLED_ITEM('color',(#301008),#46923); +#301008 = PRESENTATION_STYLE_ASSIGNMENT((#301009,#301014)); +#301009 = SURFACE_STYLE_USAGE(.BOTH.,#301010); +#301010 = SURFACE_SIDE_STYLE('',(#301011)); +#301011 = SURFACE_STYLE_FILL_AREA(#301012); +#301012 = FILL_AREA_STYLE('',(#301013)); +#301013 = FILL_AREA_STYLE_COLOUR('',#285989); +#301014 = CURVE_STYLE('',#301015,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301015 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301016 = STYLED_ITEM('color',(#301017),#46970); +#301017 = PRESENTATION_STYLE_ASSIGNMENT((#301018,#301023)); +#301018 = SURFACE_STYLE_USAGE(.BOTH.,#301019); +#301019 = SURFACE_SIDE_STYLE('',(#301020)); +#301020 = SURFACE_STYLE_FILL_AREA(#301021); +#301021 = FILL_AREA_STYLE('',(#301022)); +#301022 = FILL_AREA_STYLE_COLOUR('',#285989); +#301023 = CURVE_STYLE('',#301024,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301024 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301025 = STYLED_ITEM('color',(#301026),#46987); +#301026 = PRESENTATION_STYLE_ASSIGNMENT((#301027,#301032)); +#301027 = SURFACE_STYLE_USAGE(.BOTH.,#301028); +#301028 = SURFACE_SIDE_STYLE('',(#301029)); +#301029 = SURFACE_STYLE_FILL_AREA(#301030); +#301030 = FILL_AREA_STYLE('',(#301031)); +#301031 = FILL_AREA_STYLE_COLOUR('',#285989); +#301032 = CURVE_STYLE('',#301033,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301033 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301034 = STYLED_ITEM('color',(#301035),#47034); +#301035 = PRESENTATION_STYLE_ASSIGNMENT((#301036,#301041)); +#301036 = SURFACE_STYLE_USAGE(.BOTH.,#301037); +#301037 = SURFACE_SIDE_STYLE('',(#301038)); +#301038 = SURFACE_STYLE_FILL_AREA(#301039); +#301039 = FILL_AREA_STYLE('',(#301040)); +#301040 = FILL_AREA_STYLE_COLOUR('',#285989); +#301041 = CURVE_STYLE('',#301042,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301042 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301043 = STYLED_ITEM('color',(#301044),#47051); +#301044 = PRESENTATION_STYLE_ASSIGNMENT((#301045,#301050)); +#301045 = SURFACE_STYLE_USAGE(.BOTH.,#301046); +#301046 = SURFACE_SIDE_STYLE('',(#301047)); +#301047 = SURFACE_STYLE_FILL_AREA(#301048); +#301048 = FILL_AREA_STYLE('',(#301049)); +#301049 = FILL_AREA_STYLE_COLOUR('',#285989); +#301050 = CURVE_STYLE('',#301051,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301051 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301052 = STYLED_ITEM('color',(#301053),#47098); +#301053 = PRESENTATION_STYLE_ASSIGNMENT((#301054,#301059)); +#301054 = SURFACE_STYLE_USAGE(.BOTH.,#301055); +#301055 = SURFACE_SIDE_STYLE('',(#301056)); +#301056 = SURFACE_STYLE_FILL_AREA(#301057); +#301057 = FILL_AREA_STYLE('',(#301058)); +#301058 = FILL_AREA_STYLE_COLOUR('',#285989); +#301059 = CURVE_STYLE('',#301060,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301060 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301061 = STYLED_ITEM('color',(#301062),#47115); +#301062 = PRESENTATION_STYLE_ASSIGNMENT((#301063,#301068)); +#301063 = SURFACE_STYLE_USAGE(.BOTH.,#301064); +#301064 = SURFACE_SIDE_STYLE('',(#301065)); +#301065 = SURFACE_STYLE_FILL_AREA(#301066); +#301066 = FILL_AREA_STYLE('',(#301067)); +#301067 = FILL_AREA_STYLE_COLOUR('',#285989); +#301068 = CURVE_STYLE('',#301069,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301069 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301070 = STYLED_ITEM('color',(#301071),#47162); +#301071 = PRESENTATION_STYLE_ASSIGNMENT((#301072,#301077)); +#301072 = SURFACE_STYLE_USAGE(.BOTH.,#301073); +#301073 = SURFACE_SIDE_STYLE('',(#301074)); +#301074 = SURFACE_STYLE_FILL_AREA(#301075); +#301075 = FILL_AREA_STYLE('',(#301076)); +#301076 = FILL_AREA_STYLE_COLOUR('',#270350); +#301077 = CURVE_STYLE('',#301078,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301078 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301079 = STYLED_ITEM('color',(#301080),#47193); +#301080 = PRESENTATION_STYLE_ASSIGNMENT((#301081,#301086)); +#301081 = SURFACE_STYLE_USAGE(.BOTH.,#301082); +#301082 = SURFACE_SIDE_STYLE('',(#301083)); +#301083 = SURFACE_STYLE_FILL_AREA(#301084); +#301084 = FILL_AREA_STYLE('',(#301085)); +#301085 = FILL_AREA_STYLE_COLOUR('',#270350); +#301086 = CURVE_STYLE('',#301087,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301087 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301088 = OVER_RIDING_STYLED_ITEM('overriding color',(#301089),#47207, + #301079); +#301089 = PRESENTATION_STYLE_ASSIGNMENT((#301090,#301095)); +#301090 = SURFACE_STYLE_USAGE(.BOTH.,#301091); +#301091 = SURFACE_SIDE_STYLE('',(#301092)); +#301092 = SURFACE_STYLE_FILL_AREA(#301093); +#301093 = FILL_AREA_STYLE('',(#301094)); +#301094 = FILL_AREA_STYLE_COLOUR('',#285989); +#301095 = CURVE_STYLE('',#301096,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301096 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301097 = OVER_RIDING_STYLED_ITEM('overriding color',(#301098),#47223, + #301079); +#301098 = PRESENTATION_STYLE_ASSIGNMENT((#301099,#301104)); +#301099 = SURFACE_STYLE_USAGE(.BOTH.,#301100); +#301100 = SURFACE_SIDE_STYLE('',(#301101)); +#301101 = SURFACE_STYLE_FILL_AREA(#301102); +#301102 = FILL_AREA_STYLE('',(#301103)); +#301103 = FILL_AREA_STYLE_COLOUR('',#285989); +#301104 = CURVE_STYLE('',#301105,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301105 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301106 = STYLED_ITEM('color',(#301107),#47249); +#301107 = PRESENTATION_STYLE_ASSIGNMENT((#301108,#301113)); +#301108 = SURFACE_STYLE_USAGE(.BOTH.,#301109); +#301109 = SURFACE_SIDE_STYLE('',(#301110)); +#301110 = SURFACE_STYLE_FILL_AREA(#301111); +#301111 = FILL_AREA_STYLE('',(#301112)); +#301112 = FILL_AREA_STYLE_COLOUR('',#270350); +#301113 = CURVE_STYLE('',#301114,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301114 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301115 = STYLED_ITEM('color',(#301116),#47273); +#301116 = PRESENTATION_STYLE_ASSIGNMENT((#301117,#301122)); +#301117 = SURFACE_STYLE_USAGE(.BOTH.,#301118); +#301118 = SURFACE_SIDE_STYLE('',(#301119)); +#301119 = SURFACE_STYLE_FILL_AREA(#301120); +#301120 = FILL_AREA_STYLE('',(#301121)); +#301121 = FILL_AREA_STYLE_COLOUR('',#270350); +#301122 = CURVE_STYLE('',#301123,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301123 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301124 = OVER_RIDING_STYLED_ITEM('overriding color',(#301125),#47287, + #301115); +#301125 = PRESENTATION_STYLE_ASSIGNMENT((#301126,#301131)); +#301126 = SURFACE_STYLE_USAGE(.BOTH.,#301127); +#301127 = SURFACE_SIDE_STYLE('',(#301128)); +#301128 = SURFACE_STYLE_FILL_AREA(#301129); +#301129 = FILL_AREA_STYLE('',(#301130)); +#301130 = FILL_AREA_STYLE_COLOUR('',#285989); +#301131 = CURVE_STYLE('',#301132,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301132 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301133 = OVER_RIDING_STYLED_ITEM('overriding color',(#301134),#47303, + #301115); +#301134 = PRESENTATION_STYLE_ASSIGNMENT((#301135,#301140)); +#301135 = SURFACE_STYLE_USAGE(.BOTH.,#301136); +#301136 = SURFACE_SIDE_STYLE('',(#301137)); +#301137 = SURFACE_STYLE_FILL_AREA(#301138); +#301138 = FILL_AREA_STYLE('',(#301139)); +#301139 = FILL_AREA_STYLE_COLOUR('',#285989); +#301140 = CURVE_STYLE('',#301141,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301141 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301142 = STYLED_ITEM('color',(#301143),#47322); +#301143 = PRESENTATION_STYLE_ASSIGNMENT((#301144,#301149)); +#301144 = SURFACE_STYLE_USAGE(.BOTH.,#301145); +#301145 = SURFACE_SIDE_STYLE('',(#301146)); +#301146 = SURFACE_STYLE_FILL_AREA(#301147); +#301147 = FILL_AREA_STYLE('',(#301148)); +#301148 = FILL_AREA_STYLE_COLOUR('',#270350); +#301149 = CURVE_STYLE('',#301150,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301150 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301151 = STYLED_ITEM('color',(#301152),#47353); +#301152 = PRESENTATION_STYLE_ASSIGNMENT((#301153,#301158)); +#301153 = SURFACE_STYLE_USAGE(.BOTH.,#301154); +#301154 = SURFACE_SIDE_STYLE('',(#301155)); +#301155 = SURFACE_STYLE_FILL_AREA(#301156); +#301156 = FILL_AREA_STYLE('',(#301157)); +#301157 = FILL_AREA_STYLE_COLOUR('',#270350); +#301158 = CURVE_STYLE('',#301159,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301159 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301160 = OVER_RIDING_STYLED_ITEM('overriding color',(#301161),#47367, + #301151); +#301161 = PRESENTATION_STYLE_ASSIGNMENT((#301162,#301167)); +#301162 = SURFACE_STYLE_USAGE(.BOTH.,#301163); +#301163 = SURFACE_SIDE_STYLE('',(#301164)); +#301164 = SURFACE_STYLE_FILL_AREA(#301165); +#301165 = FILL_AREA_STYLE('',(#301166)); +#301166 = FILL_AREA_STYLE_COLOUR('',#285989); +#301167 = CURVE_STYLE('',#301168,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301168 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301169 = OVER_RIDING_STYLED_ITEM('overriding color',(#301170),#47383, + #301151); +#301170 = PRESENTATION_STYLE_ASSIGNMENT((#301171,#301176)); +#301171 = SURFACE_STYLE_USAGE(.BOTH.,#301172); +#301172 = SURFACE_SIDE_STYLE('',(#301173)); +#301173 = SURFACE_STYLE_FILL_AREA(#301174); +#301174 = FILL_AREA_STYLE('',(#301175)); +#301175 = FILL_AREA_STYLE_COLOUR('',#285989); +#301176 = CURVE_STYLE('',#301177,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301177 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301178 = STYLED_ITEM('color',(#301179),#47409); +#301179 = PRESENTATION_STYLE_ASSIGNMENT((#301180,#301185)); +#301180 = SURFACE_STYLE_USAGE(.BOTH.,#301181); +#301181 = SURFACE_SIDE_STYLE('',(#301182)); +#301182 = SURFACE_STYLE_FILL_AREA(#301183); +#301183 = FILL_AREA_STYLE('',(#301184)); +#301184 = FILL_AREA_STYLE_COLOUR('',#270350); +#301185 = CURVE_STYLE('',#301186,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301186 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301187 = STYLED_ITEM('color',(#301188),#47433); +#301188 = PRESENTATION_STYLE_ASSIGNMENT((#301189,#301194)); +#301189 = SURFACE_STYLE_USAGE(.BOTH.,#301190); +#301190 = SURFACE_SIDE_STYLE('',(#301191)); +#301191 = SURFACE_STYLE_FILL_AREA(#301192); +#301192 = FILL_AREA_STYLE('',(#301193)); +#301193 = FILL_AREA_STYLE_COLOUR('',#270350); +#301194 = CURVE_STYLE('',#301195,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301195 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301196 = OVER_RIDING_STYLED_ITEM('overriding color',(#301197),#47447, + #301187); +#301197 = PRESENTATION_STYLE_ASSIGNMENT((#301198,#301203)); +#301198 = SURFACE_STYLE_USAGE(.BOTH.,#301199); +#301199 = SURFACE_SIDE_STYLE('',(#301200)); +#301200 = SURFACE_STYLE_FILL_AREA(#301201); +#301201 = FILL_AREA_STYLE('',(#301202)); +#301202 = FILL_AREA_STYLE_COLOUR('',#285989); +#301203 = CURVE_STYLE('',#301204,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301204 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301205 = OVER_RIDING_STYLED_ITEM('overriding color',(#301206),#47463, + #301187); +#301206 = PRESENTATION_STYLE_ASSIGNMENT((#301207,#301212)); +#301207 = SURFACE_STYLE_USAGE(.BOTH.,#301208); +#301208 = SURFACE_SIDE_STYLE('',(#301209)); +#301209 = SURFACE_STYLE_FILL_AREA(#301210); +#301210 = FILL_AREA_STYLE('',(#301211)); +#301211 = FILL_AREA_STYLE_COLOUR('',#285989); +#301212 = CURVE_STYLE('',#301213,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301213 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301214 = STYLED_ITEM('color',(#301215),#47482); +#301215 = PRESENTATION_STYLE_ASSIGNMENT((#301216,#301221)); +#301216 = SURFACE_STYLE_USAGE(.BOTH.,#301217); +#301217 = SURFACE_SIDE_STYLE('',(#301218)); +#301218 = SURFACE_STYLE_FILL_AREA(#301219); +#301219 = FILL_AREA_STYLE('',(#301220)); +#301220 = FILL_AREA_STYLE_COLOUR('',#270350); +#301221 = CURVE_STYLE('',#301222,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301222 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301223 = STYLED_ITEM('color',(#301224),#47513); +#301224 = PRESENTATION_STYLE_ASSIGNMENT((#301225,#301230)); +#301225 = SURFACE_STYLE_USAGE(.BOTH.,#301226); +#301226 = SURFACE_SIDE_STYLE('',(#301227)); +#301227 = SURFACE_STYLE_FILL_AREA(#301228); +#301228 = FILL_AREA_STYLE('',(#301229)); +#301229 = FILL_AREA_STYLE_COLOUR('',#270350); +#301230 = CURVE_STYLE('',#301231,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301231 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301232 = OVER_RIDING_STYLED_ITEM('overriding color',(#301233),#47527, + #301223); +#301233 = PRESENTATION_STYLE_ASSIGNMENT((#301234,#301239)); +#301234 = SURFACE_STYLE_USAGE(.BOTH.,#301235); +#301235 = SURFACE_SIDE_STYLE('',(#301236)); +#301236 = SURFACE_STYLE_FILL_AREA(#301237); +#301237 = FILL_AREA_STYLE('',(#301238)); +#301238 = FILL_AREA_STYLE_COLOUR('',#285989); +#301239 = CURVE_STYLE('',#301240,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301240 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301241 = OVER_RIDING_STYLED_ITEM('overriding color',(#301242),#47543, + #301223); +#301242 = PRESENTATION_STYLE_ASSIGNMENT((#301243,#301248)); +#301243 = SURFACE_STYLE_USAGE(.BOTH.,#301244); +#301244 = SURFACE_SIDE_STYLE('',(#301245)); +#301245 = SURFACE_STYLE_FILL_AREA(#301246); +#301246 = FILL_AREA_STYLE('',(#301247)); +#301247 = FILL_AREA_STYLE_COLOUR('',#285989); +#301248 = CURVE_STYLE('',#301249,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301249 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301250 = STYLED_ITEM('color',(#301251),#47569); +#301251 = PRESENTATION_STYLE_ASSIGNMENT((#301252,#301257)); +#301252 = SURFACE_STYLE_USAGE(.BOTH.,#301253); +#301253 = SURFACE_SIDE_STYLE('',(#301254)); +#301254 = SURFACE_STYLE_FILL_AREA(#301255); +#301255 = FILL_AREA_STYLE('',(#301256)); +#301256 = FILL_AREA_STYLE_COLOUR('',#270350); +#301257 = CURVE_STYLE('',#301258,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301258 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301259 = STYLED_ITEM('color',(#301260),#47593); +#301260 = PRESENTATION_STYLE_ASSIGNMENT((#301261,#301266)); +#301261 = SURFACE_STYLE_USAGE(.BOTH.,#301262); +#301262 = SURFACE_SIDE_STYLE('',(#301263)); +#301263 = SURFACE_STYLE_FILL_AREA(#301264); +#301264 = FILL_AREA_STYLE('',(#301265)); +#301265 = FILL_AREA_STYLE_COLOUR('',#270350); +#301266 = CURVE_STYLE('',#301267,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301267 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301268 = OVER_RIDING_STYLED_ITEM('overriding color',(#301269),#47607, + #301259); +#301269 = PRESENTATION_STYLE_ASSIGNMENT((#301270,#301275)); +#301270 = SURFACE_STYLE_USAGE(.BOTH.,#301271); +#301271 = SURFACE_SIDE_STYLE('',(#301272)); +#301272 = SURFACE_STYLE_FILL_AREA(#301273); +#301273 = FILL_AREA_STYLE('',(#301274)); +#301274 = FILL_AREA_STYLE_COLOUR('',#285989); +#301275 = CURVE_STYLE('',#301276,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301276 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301277 = OVER_RIDING_STYLED_ITEM('overriding color',(#301278),#47623, + #301259); +#301278 = PRESENTATION_STYLE_ASSIGNMENT((#301279,#301284)); +#301279 = SURFACE_STYLE_USAGE(.BOTH.,#301280); +#301280 = SURFACE_SIDE_STYLE('',(#301281)); +#301281 = SURFACE_STYLE_FILL_AREA(#301282); +#301282 = FILL_AREA_STYLE('',(#301283)); +#301283 = FILL_AREA_STYLE_COLOUR('',#285989); +#301284 = CURVE_STYLE('',#301285,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301285 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301286 = STYLED_ITEM('color',(#301287),#47642); +#301287 = PRESENTATION_STYLE_ASSIGNMENT((#301288,#301293)); +#301288 = SURFACE_STYLE_USAGE(.BOTH.,#301289); +#301289 = SURFACE_SIDE_STYLE('',(#301290)); +#301290 = SURFACE_STYLE_FILL_AREA(#301291); +#301291 = FILL_AREA_STYLE('',(#301292)); +#301292 = FILL_AREA_STYLE_COLOUR('',#270350); +#301293 = CURVE_STYLE('',#301294,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301294 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301295 = STYLED_ITEM('color',(#301296),#47673); +#301296 = PRESENTATION_STYLE_ASSIGNMENT((#301297,#301302)); +#301297 = SURFACE_STYLE_USAGE(.BOTH.,#301298); +#301298 = SURFACE_SIDE_STYLE('',(#301299)); +#301299 = SURFACE_STYLE_FILL_AREA(#301300); +#301300 = FILL_AREA_STYLE('',(#301301)); +#301301 = FILL_AREA_STYLE_COLOUR('',#270350); +#301302 = CURVE_STYLE('',#301303,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301303 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301304 = OVER_RIDING_STYLED_ITEM('overriding color',(#301305),#47687, + #301295); +#301305 = PRESENTATION_STYLE_ASSIGNMENT((#301306,#301311)); +#301306 = SURFACE_STYLE_USAGE(.BOTH.,#301307); +#301307 = SURFACE_SIDE_STYLE('',(#301308)); +#301308 = SURFACE_STYLE_FILL_AREA(#301309); +#301309 = FILL_AREA_STYLE('',(#301310)); +#301310 = FILL_AREA_STYLE_COLOUR('',#285989); +#301311 = CURVE_STYLE('',#301312,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301312 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301313 = OVER_RIDING_STYLED_ITEM('overriding color',(#301314),#47703, + #301295); +#301314 = PRESENTATION_STYLE_ASSIGNMENT((#301315,#301320)); +#301315 = SURFACE_STYLE_USAGE(.BOTH.,#301316); +#301316 = SURFACE_SIDE_STYLE('',(#301317)); +#301317 = SURFACE_STYLE_FILL_AREA(#301318); +#301318 = FILL_AREA_STYLE('',(#301319)); +#301319 = FILL_AREA_STYLE_COLOUR('',#285989); +#301320 = CURVE_STYLE('',#301321,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301321 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301322 = STYLED_ITEM('color',(#301323),#47729); +#301323 = PRESENTATION_STYLE_ASSIGNMENT((#301324,#301329)); +#301324 = SURFACE_STYLE_USAGE(.BOTH.,#301325); +#301325 = SURFACE_SIDE_STYLE('',(#301326)); +#301326 = SURFACE_STYLE_FILL_AREA(#301327); +#301327 = FILL_AREA_STYLE('',(#301328)); +#301328 = FILL_AREA_STYLE_COLOUR('',#270350); +#301329 = CURVE_STYLE('',#301330,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301330 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301331 = STYLED_ITEM('color',(#301332),#47753); +#301332 = PRESENTATION_STYLE_ASSIGNMENT((#301333,#301338)); +#301333 = SURFACE_STYLE_USAGE(.BOTH.,#301334); +#301334 = SURFACE_SIDE_STYLE('',(#301335)); +#301335 = SURFACE_STYLE_FILL_AREA(#301336); +#301336 = FILL_AREA_STYLE('',(#301337)); +#301337 = FILL_AREA_STYLE_COLOUR('',#270350); +#301338 = CURVE_STYLE('',#301339,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301339 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301340 = OVER_RIDING_STYLED_ITEM('overriding color',(#301341),#47767, + #301331); +#301341 = PRESENTATION_STYLE_ASSIGNMENT((#301342,#301347)); +#301342 = SURFACE_STYLE_USAGE(.BOTH.,#301343); +#301343 = SURFACE_SIDE_STYLE('',(#301344)); +#301344 = SURFACE_STYLE_FILL_AREA(#301345); +#301345 = FILL_AREA_STYLE('',(#301346)); +#301346 = FILL_AREA_STYLE_COLOUR('',#285989); +#301347 = CURVE_STYLE('',#301348,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301348 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301349 = OVER_RIDING_STYLED_ITEM('overriding color',(#301350),#47783, + #301331); +#301350 = PRESENTATION_STYLE_ASSIGNMENT((#301351,#301356)); +#301351 = SURFACE_STYLE_USAGE(.BOTH.,#301352); +#301352 = SURFACE_SIDE_STYLE('',(#301353)); +#301353 = SURFACE_STYLE_FILL_AREA(#301354); +#301354 = FILL_AREA_STYLE('',(#301355)); +#301355 = FILL_AREA_STYLE_COLOUR('',#285989); +#301356 = CURVE_STYLE('',#301357,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301357 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301358 = STYLED_ITEM('color',(#301359),#47802); +#301359 = PRESENTATION_STYLE_ASSIGNMENT((#301360,#301365)); +#301360 = SURFACE_STYLE_USAGE(.BOTH.,#301361); +#301361 = SURFACE_SIDE_STYLE('',(#301362)); +#301362 = SURFACE_STYLE_FILL_AREA(#301363); +#301363 = FILL_AREA_STYLE('',(#301364)); +#301364 = FILL_AREA_STYLE_COLOUR('',#270350); +#301365 = CURVE_STYLE('',#301366,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301366 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301367 = STYLED_ITEM('color',(#301368),#47833); +#301368 = PRESENTATION_STYLE_ASSIGNMENT((#301369,#301374)); +#301369 = SURFACE_STYLE_USAGE(.BOTH.,#301370); +#301370 = SURFACE_SIDE_STYLE('',(#301371)); +#301371 = SURFACE_STYLE_FILL_AREA(#301372); +#301372 = FILL_AREA_STYLE('',(#301373)); +#301373 = FILL_AREA_STYLE_COLOUR('',#270350); +#301374 = CURVE_STYLE('',#301375,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301375 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301376 = OVER_RIDING_STYLED_ITEM('overriding color',(#301377),#47847, + #301367); +#301377 = PRESENTATION_STYLE_ASSIGNMENT((#301378,#301383)); +#301378 = SURFACE_STYLE_USAGE(.BOTH.,#301379); +#301379 = SURFACE_SIDE_STYLE('',(#301380)); +#301380 = SURFACE_STYLE_FILL_AREA(#301381); +#301381 = FILL_AREA_STYLE('',(#301382)); +#301382 = FILL_AREA_STYLE_COLOUR('',#285989); +#301383 = CURVE_STYLE('',#301384,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301384 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301385 = OVER_RIDING_STYLED_ITEM('overriding color',(#301386),#47863, + #301367); +#301386 = PRESENTATION_STYLE_ASSIGNMENT((#301387,#301392)); +#301387 = SURFACE_STYLE_USAGE(.BOTH.,#301388); +#301388 = SURFACE_SIDE_STYLE('',(#301389)); +#301389 = SURFACE_STYLE_FILL_AREA(#301390); +#301390 = FILL_AREA_STYLE('',(#301391)); +#301391 = FILL_AREA_STYLE_COLOUR('',#285989); +#301392 = CURVE_STYLE('',#301393,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301393 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301394 = STYLED_ITEM('color',(#301395),#47889); +#301395 = PRESENTATION_STYLE_ASSIGNMENT((#301396,#301401)); +#301396 = SURFACE_STYLE_USAGE(.BOTH.,#301397); +#301397 = SURFACE_SIDE_STYLE('',(#301398)); +#301398 = SURFACE_STYLE_FILL_AREA(#301399); +#301399 = FILL_AREA_STYLE('',(#301400)); +#301400 = FILL_AREA_STYLE_COLOUR('',#270350); +#301401 = CURVE_STYLE('',#301402,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301402 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301403 = STYLED_ITEM('color',(#301404),#47913); +#301404 = PRESENTATION_STYLE_ASSIGNMENT((#301405,#301410)); +#301405 = SURFACE_STYLE_USAGE(.BOTH.,#301406); +#301406 = SURFACE_SIDE_STYLE('',(#301407)); +#301407 = SURFACE_STYLE_FILL_AREA(#301408); +#301408 = FILL_AREA_STYLE('',(#301409)); +#301409 = FILL_AREA_STYLE_COLOUR('',#270350); +#301410 = CURVE_STYLE('',#301411,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301411 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301412 = OVER_RIDING_STYLED_ITEM('overriding color',(#301413),#47927, + #301403); +#301413 = PRESENTATION_STYLE_ASSIGNMENT((#301414,#301419)); +#301414 = SURFACE_STYLE_USAGE(.BOTH.,#301415); +#301415 = SURFACE_SIDE_STYLE('',(#301416)); +#301416 = SURFACE_STYLE_FILL_AREA(#301417); +#301417 = FILL_AREA_STYLE('',(#301418)); +#301418 = FILL_AREA_STYLE_COLOUR('',#285989); +#301419 = CURVE_STYLE('',#301420,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301420 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301421 = OVER_RIDING_STYLED_ITEM('overriding color',(#301422),#47943, + #301403); +#301422 = PRESENTATION_STYLE_ASSIGNMENT((#301423,#301428)); +#301423 = SURFACE_STYLE_USAGE(.BOTH.,#301424); +#301424 = SURFACE_SIDE_STYLE('',(#301425)); +#301425 = SURFACE_STYLE_FILL_AREA(#301426); +#301426 = FILL_AREA_STYLE('',(#301427)); +#301427 = FILL_AREA_STYLE_COLOUR('',#285989); +#301428 = CURVE_STYLE('',#301429,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301429 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301430 = STYLED_ITEM('color',(#301431),#47962); +#301431 = PRESENTATION_STYLE_ASSIGNMENT((#301432,#301437)); +#301432 = SURFACE_STYLE_USAGE(.BOTH.,#301433); +#301433 = SURFACE_SIDE_STYLE('',(#301434)); +#301434 = SURFACE_STYLE_FILL_AREA(#301435); +#301435 = FILL_AREA_STYLE('',(#301436)); +#301436 = FILL_AREA_STYLE_COLOUR('',#270350); +#301437 = CURVE_STYLE('',#301438,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301438 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301439 = STYLED_ITEM('color',(#301440),#47993); +#301440 = PRESENTATION_STYLE_ASSIGNMENT((#301441,#301446)); +#301441 = SURFACE_STYLE_USAGE(.BOTH.,#301442); +#301442 = SURFACE_SIDE_STYLE('',(#301443)); +#301443 = SURFACE_STYLE_FILL_AREA(#301444); +#301444 = FILL_AREA_STYLE('',(#301445)); +#301445 = FILL_AREA_STYLE_COLOUR('',#270350); +#301446 = CURVE_STYLE('',#301447,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301447 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301448 = OVER_RIDING_STYLED_ITEM('overriding color',(#301449),#48007, + #301439); +#301449 = PRESENTATION_STYLE_ASSIGNMENT((#301450,#301455)); +#301450 = SURFACE_STYLE_USAGE(.BOTH.,#301451); +#301451 = SURFACE_SIDE_STYLE('',(#301452)); +#301452 = SURFACE_STYLE_FILL_AREA(#301453); +#301453 = FILL_AREA_STYLE('',(#301454)); +#301454 = FILL_AREA_STYLE_COLOUR('',#285989); +#301455 = CURVE_STYLE('',#301456,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301456 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301457 = OVER_RIDING_STYLED_ITEM('overriding color',(#301458),#48023, + #301439); +#301458 = PRESENTATION_STYLE_ASSIGNMENT((#301459,#301464)); +#301459 = SURFACE_STYLE_USAGE(.BOTH.,#301460); +#301460 = SURFACE_SIDE_STYLE('',(#301461)); +#301461 = SURFACE_STYLE_FILL_AREA(#301462); +#301462 = FILL_AREA_STYLE('',(#301463)); +#301463 = FILL_AREA_STYLE_COLOUR('',#285989); +#301464 = CURVE_STYLE('',#301465,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301465 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301466 = STYLED_ITEM('color',(#301467),#48049); +#301467 = PRESENTATION_STYLE_ASSIGNMENT((#301468,#301473)); +#301468 = SURFACE_STYLE_USAGE(.BOTH.,#301469); +#301469 = SURFACE_SIDE_STYLE('',(#301470)); +#301470 = SURFACE_STYLE_FILL_AREA(#301471); +#301471 = FILL_AREA_STYLE('',(#301472)); +#301472 = FILL_AREA_STYLE_COLOUR('',#270350); +#301473 = CURVE_STYLE('',#301474,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301474 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301475 = STYLED_ITEM('color',(#301476),#48073); +#301476 = PRESENTATION_STYLE_ASSIGNMENT((#301477,#301482)); +#301477 = SURFACE_STYLE_USAGE(.BOTH.,#301478); +#301478 = SURFACE_SIDE_STYLE('',(#301479)); +#301479 = SURFACE_STYLE_FILL_AREA(#301480); +#301480 = FILL_AREA_STYLE('',(#301481)); +#301481 = FILL_AREA_STYLE_COLOUR('',#270350); +#301482 = CURVE_STYLE('',#301483,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301483 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301484 = OVER_RIDING_STYLED_ITEM('overriding color',(#301485),#48087, + #301475); +#301485 = PRESENTATION_STYLE_ASSIGNMENT((#301486,#301491)); +#301486 = SURFACE_STYLE_USAGE(.BOTH.,#301487); +#301487 = SURFACE_SIDE_STYLE('',(#301488)); +#301488 = SURFACE_STYLE_FILL_AREA(#301489); +#301489 = FILL_AREA_STYLE('',(#301490)); +#301490 = FILL_AREA_STYLE_COLOUR('',#285989); +#301491 = CURVE_STYLE('',#301492,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301492 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301493 = OVER_RIDING_STYLED_ITEM('overriding color',(#301494),#48103, + #301475); +#301494 = PRESENTATION_STYLE_ASSIGNMENT((#301495,#301500)); +#301495 = SURFACE_STYLE_USAGE(.BOTH.,#301496); +#301496 = SURFACE_SIDE_STYLE('',(#301497)); +#301497 = SURFACE_STYLE_FILL_AREA(#301498); +#301498 = FILL_AREA_STYLE('',(#301499)); +#301499 = FILL_AREA_STYLE_COLOUR('',#285989); +#301500 = CURVE_STYLE('',#301501,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301501 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301502 = STYLED_ITEM('color',(#301503),#48122); +#301503 = PRESENTATION_STYLE_ASSIGNMENT((#301504,#301509)); +#301504 = SURFACE_STYLE_USAGE(.BOTH.,#301505); +#301505 = SURFACE_SIDE_STYLE('',(#301506)); +#301506 = SURFACE_STYLE_FILL_AREA(#301507); +#301507 = FILL_AREA_STYLE('',(#301508)); +#301508 = FILL_AREA_STYLE_COLOUR('',#270350); +#301509 = CURVE_STYLE('',#301510,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301510 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301511 = STYLED_ITEM('color',(#301512),#48153); +#301512 = PRESENTATION_STYLE_ASSIGNMENT((#301513,#301518)); +#301513 = SURFACE_STYLE_USAGE(.BOTH.,#301514); +#301514 = SURFACE_SIDE_STYLE('',(#301515)); +#301515 = SURFACE_STYLE_FILL_AREA(#301516); +#301516 = FILL_AREA_STYLE('',(#301517)); +#301517 = FILL_AREA_STYLE_COLOUR('',#270350); +#301518 = CURVE_STYLE('',#301519,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301519 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301520 = OVER_RIDING_STYLED_ITEM('overriding color',(#301521),#48167, + #301511); +#301521 = PRESENTATION_STYLE_ASSIGNMENT((#301522,#301527)); +#301522 = SURFACE_STYLE_USAGE(.BOTH.,#301523); +#301523 = SURFACE_SIDE_STYLE('',(#301524)); +#301524 = SURFACE_STYLE_FILL_AREA(#301525); +#301525 = FILL_AREA_STYLE('',(#301526)); +#301526 = FILL_AREA_STYLE_COLOUR('',#285989); +#301527 = CURVE_STYLE('',#301528,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301528 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301529 = OVER_RIDING_STYLED_ITEM('overriding color',(#301530),#48183, + #301511); +#301530 = PRESENTATION_STYLE_ASSIGNMENT((#301531,#301536)); +#301531 = SURFACE_STYLE_USAGE(.BOTH.,#301532); +#301532 = SURFACE_SIDE_STYLE('',(#301533)); +#301533 = SURFACE_STYLE_FILL_AREA(#301534); +#301534 = FILL_AREA_STYLE('',(#301535)); +#301535 = FILL_AREA_STYLE_COLOUR('',#285989); +#301536 = CURVE_STYLE('',#301537,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301537 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301538 = STYLED_ITEM('color',(#301539),#48209); +#301539 = PRESENTATION_STYLE_ASSIGNMENT((#301540,#301545)); +#301540 = SURFACE_STYLE_USAGE(.BOTH.,#301541); +#301541 = SURFACE_SIDE_STYLE('',(#301542)); +#301542 = SURFACE_STYLE_FILL_AREA(#301543); +#301543 = FILL_AREA_STYLE('',(#301544)); +#301544 = FILL_AREA_STYLE_COLOUR('',#270350); +#301545 = CURVE_STYLE('',#301546,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301546 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301547 = STYLED_ITEM('color',(#301548),#48233); +#301548 = PRESENTATION_STYLE_ASSIGNMENT((#301549,#301554)); +#301549 = SURFACE_STYLE_USAGE(.BOTH.,#301550); +#301550 = SURFACE_SIDE_STYLE('',(#301551)); +#301551 = SURFACE_STYLE_FILL_AREA(#301552); +#301552 = FILL_AREA_STYLE('',(#301553)); +#301553 = FILL_AREA_STYLE_COLOUR('',#270350); +#301554 = CURVE_STYLE('',#301555,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301555 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301556 = OVER_RIDING_STYLED_ITEM('overriding color',(#301557),#48247, + #301547); +#301557 = PRESENTATION_STYLE_ASSIGNMENT((#301558,#301563)); +#301558 = SURFACE_STYLE_USAGE(.BOTH.,#301559); +#301559 = SURFACE_SIDE_STYLE('',(#301560)); +#301560 = SURFACE_STYLE_FILL_AREA(#301561); +#301561 = FILL_AREA_STYLE('',(#301562)); +#301562 = FILL_AREA_STYLE_COLOUR('',#285989); +#301563 = CURVE_STYLE('',#301564,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301564 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301565 = OVER_RIDING_STYLED_ITEM('overriding color',(#301566),#48263, + #301547); +#301566 = PRESENTATION_STYLE_ASSIGNMENT((#301567,#301572)); +#301567 = SURFACE_STYLE_USAGE(.BOTH.,#301568); +#301568 = SURFACE_SIDE_STYLE('',(#301569)); +#301569 = SURFACE_STYLE_FILL_AREA(#301570); +#301570 = FILL_AREA_STYLE('',(#301571)); +#301571 = FILL_AREA_STYLE_COLOUR('',#285989); +#301572 = CURVE_STYLE('',#301573,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301573 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301574 = STYLED_ITEM('color',(#301575),#48282); +#301575 = PRESENTATION_STYLE_ASSIGNMENT((#301576,#301581)); +#301576 = SURFACE_STYLE_USAGE(.BOTH.,#301577); +#301577 = SURFACE_SIDE_STYLE('',(#301578)); +#301578 = SURFACE_STYLE_FILL_AREA(#301579); +#301579 = FILL_AREA_STYLE('',(#301580)); +#301580 = FILL_AREA_STYLE_COLOUR('',#270350); +#301581 = CURVE_STYLE('',#301582,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301582 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301583 = STYLED_ITEM('color',(#301584),#48313); +#301584 = PRESENTATION_STYLE_ASSIGNMENT((#301585,#301590)); +#301585 = SURFACE_STYLE_USAGE(.BOTH.,#301586); +#301586 = SURFACE_SIDE_STYLE('',(#301587)); +#301587 = SURFACE_STYLE_FILL_AREA(#301588); +#301588 = FILL_AREA_STYLE('',(#301589)); +#301589 = FILL_AREA_STYLE_COLOUR('',#270350); +#301590 = CURVE_STYLE('',#301591,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301591 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301592 = OVER_RIDING_STYLED_ITEM('overriding color',(#301593),#48327, + #301583); +#301593 = PRESENTATION_STYLE_ASSIGNMENT((#301594,#301599)); +#301594 = SURFACE_STYLE_USAGE(.BOTH.,#301595); +#301595 = SURFACE_SIDE_STYLE('',(#301596)); +#301596 = SURFACE_STYLE_FILL_AREA(#301597); +#301597 = FILL_AREA_STYLE('',(#301598)); +#301598 = FILL_AREA_STYLE_COLOUR('',#285989); +#301599 = CURVE_STYLE('',#301600,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301600 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301601 = OVER_RIDING_STYLED_ITEM('overriding color',(#301602),#48343, + #301583); +#301602 = PRESENTATION_STYLE_ASSIGNMENT((#301603,#301608)); +#301603 = SURFACE_STYLE_USAGE(.BOTH.,#301604); +#301604 = SURFACE_SIDE_STYLE('',(#301605)); +#301605 = SURFACE_STYLE_FILL_AREA(#301606); +#301606 = FILL_AREA_STYLE('',(#301607)); +#301607 = FILL_AREA_STYLE_COLOUR('',#285989); +#301608 = CURVE_STYLE('',#301609,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301609 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301610 = STYLED_ITEM('color',(#301611),#48369); +#301611 = PRESENTATION_STYLE_ASSIGNMENT((#301612,#301617)); +#301612 = SURFACE_STYLE_USAGE(.BOTH.,#301613); +#301613 = SURFACE_SIDE_STYLE('',(#301614)); +#301614 = SURFACE_STYLE_FILL_AREA(#301615); +#301615 = FILL_AREA_STYLE('',(#301616)); +#301616 = FILL_AREA_STYLE_COLOUR('',#270350); +#301617 = CURVE_STYLE('',#301618,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301618 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301619 = STYLED_ITEM('color',(#301620),#48393); +#301620 = PRESENTATION_STYLE_ASSIGNMENT((#301621,#301626)); +#301621 = SURFACE_STYLE_USAGE(.BOTH.,#301622); +#301622 = SURFACE_SIDE_STYLE('',(#301623)); +#301623 = SURFACE_STYLE_FILL_AREA(#301624); +#301624 = FILL_AREA_STYLE('',(#301625)); +#301625 = FILL_AREA_STYLE_COLOUR('',#270350); +#301626 = CURVE_STYLE('',#301627,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301627 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301628 = OVER_RIDING_STYLED_ITEM('overriding color',(#301629),#48407, + #301619); +#301629 = PRESENTATION_STYLE_ASSIGNMENT((#301630,#301635)); +#301630 = SURFACE_STYLE_USAGE(.BOTH.,#301631); +#301631 = SURFACE_SIDE_STYLE('',(#301632)); +#301632 = SURFACE_STYLE_FILL_AREA(#301633); +#301633 = FILL_AREA_STYLE('',(#301634)); +#301634 = FILL_AREA_STYLE_COLOUR('',#285989); +#301635 = CURVE_STYLE('',#301636,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301636 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301637 = OVER_RIDING_STYLED_ITEM('overriding color',(#301638),#48423, + #301619); +#301638 = PRESENTATION_STYLE_ASSIGNMENT((#301639,#301644)); +#301639 = SURFACE_STYLE_USAGE(.BOTH.,#301640); +#301640 = SURFACE_SIDE_STYLE('',(#301641)); +#301641 = SURFACE_STYLE_FILL_AREA(#301642); +#301642 = FILL_AREA_STYLE('',(#301643)); +#301643 = FILL_AREA_STYLE_COLOUR('',#285989); +#301644 = CURVE_STYLE('',#301645,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301645 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301646 = STYLED_ITEM('color',(#301647),#48442); +#301647 = PRESENTATION_STYLE_ASSIGNMENT((#301648,#301653)); +#301648 = SURFACE_STYLE_USAGE(.BOTH.,#301649); +#301649 = SURFACE_SIDE_STYLE('',(#301650)); +#301650 = SURFACE_STYLE_FILL_AREA(#301651); +#301651 = FILL_AREA_STYLE('',(#301652)); +#301652 = FILL_AREA_STYLE_COLOUR('',#270350); +#301653 = CURVE_STYLE('',#301654,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301654 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301655 = STYLED_ITEM('color',(#301656),#48473); +#301656 = PRESENTATION_STYLE_ASSIGNMENT((#301657,#301662)); +#301657 = SURFACE_STYLE_USAGE(.BOTH.,#301658); +#301658 = SURFACE_SIDE_STYLE('',(#301659)); +#301659 = SURFACE_STYLE_FILL_AREA(#301660); +#301660 = FILL_AREA_STYLE('',(#301661)); +#301661 = FILL_AREA_STYLE_COLOUR('',#270350); +#301662 = CURVE_STYLE('',#301663,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301663 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301664 = OVER_RIDING_STYLED_ITEM('overriding color',(#301665),#48487, + #301655); +#301665 = PRESENTATION_STYLE_ASSIGNMENT((#301666,#301671)); +#301666 = SURFACE_STYLE_USAGE(.BOTH.,#301667); +#301667 = SURFACE_SIDE_STYLE('',(#301668)); +#301668 = SURFACE_STYLE_FILL_AREA(#301669); +#301669 = FILL_AREA_STYLE('',(#301670)); +#301670 = FILL_AREA_STYLE_COLOUR('',#285989); +#301671 = CURVE_STYLE('',#301672,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301672 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301673 = OVER_RIDING_STYLED_ITEM('overriding color',(#301674),#48503, + #301655); +#301674 = PRESENTATION_STYLE_ASSIGNMENT((#301675,#301680)); +#301675 = SURFACE_STYLE_USAGE(.BOTH.,#301676); +#301676 = SURFACE_SIDE_STYLE('',(#301677)); +#301677 = SURFACE_STYLE_FILL_AREA(#301678); +#301678 = FILL_AREA_STYLE('',(#301679)); +#301679 = FILL_AREA_STYLE_COLOUR('',#285989); +#301680 = CURVE_STYLE('',#301681,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301681 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301682 = STYLED_ITEM('color',(#301683),#48529); +#301683 = PRESENTATION_STYLE_ASSIGNMENT((#301684,#301689)); +#301684 = SURFACE_STYLE_USAGE(.BOTH.,#301685); +#301685 = SURFACE_SIDE_STYLE('',(#301686)); +#301686 = SURFACE_STYLE_FILL_AREA(#301687); +#301687 = FILL_AREA_STYLE('',(#301688)); +#301688 = FILL_AREA_STYLE_COLOUR('',#270350); +#301689 = CURVE_STYLE('',#301690,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301690 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301691 = STYLED_ITEM('color',(#301692),#48553); +#301692 = PRESENTATION_STYLE_ASSIGNMENT((#301693,#301698)); +#301693 = SURFACE_STYLE_USAGE(.BOTH.,#301694); +#301694 = SURFACE_SIDE_STYLE('',(#301695)); +#301695 = SURFACE_STYLE_FILL_AREA(#301696); +#301696 = FILL_AREA_STYLE('',(#301697)); +#301697 = FILL_AREA_STYLE_COLOUR('',#270350); +#301698 = CURVE_STYLE('',#301699,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301699 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301700 = OVER_RIDING_STYLED_ITEM('overriding color',(#301701),#48567, + #301691); +#301701 = PRESENTATION_STYLE_ASSIGNMENT((#301702,#301707)); +#301702 = SURFACE_STYLE_USAGE(.BOTH.,#301703); +#301703 = SURFACE_SIDE_STYLE('',(#301704)); +#301704 = SURFACE_STYLE_FILL_AREA(#301705); +#301705 = FILL_AREA_STYLE('',(#301706)); +#301706 = FILL_AREA_STYLE_COLOUR('',#285989); +#301707 = CURVE_STYLE('',#301708,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301708 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301709 = OVER_RIDING_STYLED_ITEM('overriding color',(#301710),#48583, + #301691); +#301710 = PRESENTATION_STYLE_ASSIGNMENT((#301711,#301716)); +#301711 = SURFACE_STYLE_USAGE(.BOTH.,#301712); +#301712 = SURFACE_SIDE_STYLE('',(#301713)); +#301713 = SURFACE_STYLE_FILL_AREA(#301714); +#301714 = FILL_AREA_STYLE('',(#301715)); +#301715 = FILL_AREA_STYLE_COLOUR('',#285989); +#301716 = CURVE_STYLE('',#301717,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301717 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301718 = STYLED_ITEM('color',(#301719),#48602); +#301719 = PRESENTATION_STYLE_ASSIGNMENT((#301720,#301725)); +#301720 = SURFACE_STYLE_USAGE(.BOTH.,#301721); +#301721 = SURFACE_SIDE_STYLE('',(#301722)); +#301722 = SURFACE_STYLE_FILL_AREA(#301723); +#301723 = FILL_AREA_STYLE('',(#301724)); +#301724 = FILL_AREA_STYLE_COLOUR('',#270350); +#301725 = CURVE_STYLE('',#301726,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301726 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301727 = STYLED_ITEM('color',(#301728),#48633); +#301728 = PRESENTATION_STYLE_ASSIGNMENT((#301729,#301734)); +#301729 = SURFACE_STYLE_USAGE(.BOTH.,#301730); +#301730 = SURFACE_SIDE_STYLE('',(#301731)); +#301731 = SURFACE_STYLE_FILL_AREA(#301732); +#301732 = FILL_AREA_STYLE('',(#301733)); +#301733 = FILL_AREA_STYLE_COLOUR('',#270350); +#301734 = CURVE_STYLE('',#301735,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301735 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301736 = OVER_RIDING_STYLED_ITEM('overriding color',(#301737),#48647, + #301727); +#301737 = PRESENTATION_STYLE_ASSIGNMENT((#301738,#301743)); +#301738 = SURFACE_STYLE_USAGE(.BOTH.,#301739); +#301739 = SURFACE_SIDE_STYLE('',(#301740)); +#301740 = SURFACE_STYLE_FILL_AREA(#301741); +#301741 = FILL_AREA_STYLE('',(#301742)); +#301742 = FILL_AREA_STYLE_COLOUR('',#285989); +#301743 = CURVE_STYLE('',#301744,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301744 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301745 = OVER_RIDING_STYLED_ITEM('overriding color',(#301746),#48663, + #301727); +#301746 = PRESENTATION_STYLE_ASSIGNMENT((#301747,#301752)); +#301747 = SURFACE_STYLE_USAGE(.BOTH.,#301748); +#301748 = SURFACE_SIDE_STYLE('',(#301749)); +#301749 = SURFACE_STYLE_FILL_AREA(#301750); +#301750 = FILL_AREA_STYLE('',(#301751)); +#301751 = FILL_AREA_STYLE_COLOUR('',#285989); +#301752 = CURVE_STYLE('',#301753,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301753 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301754 = STYLED_ITEM('color',(#301755),#48689); +#301755 = PRESENTATION_STYLE_ASSIGNMENT((#301756,#301761)); +#301756 = SURFACE_STYLE_USAGE(.BOTH.,#301757); +#301757 = SURFACE_SIDE_STYLE('',(#301758)); +#301758 = SURFACE_STYLE_FILL_AREA(#301759); +#301759 = FILL_AREA_STYLE('',(#301760)); +#301760 = FILL_AREA_STYLE_COLOUR('',#270350); +#301761 = CURVE_STYLE('',#301762,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301762 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301763 = STYLED_ITEM('color',(#301764),#48713); +#301764 = PRESENTATION_STYLE_ASSIGNMENT((#301765,#301770)); +#301765 = SURFACE_STYLE_USAGE(.BOTH.,#301766); +#301766 = SURFACE_SIDE_STYLE('',(#301767)); +#301767 = SURFACE_STYLE_FILL_AREA(#301768); +#301768 = FILL_AREA_STYLE('',(#301769)); +#301769 = FILL_AREA_STYLE_COLOUR('',#270350); +#301770 = CURVE_STYLE('',#301771,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#301771 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301772 = OVER_RIDING_STYLED_ITEM('overriding color',(#301773),#48727, + #301763); +#301773 = PRESENTATION_STYLE_ASSIGNMENT((#301774,#301779)); +#301774 = SURFACE_STYLE_USAGE(.BOTH.,#301775); +#301775 = SURFACE_SIDE_STYLE('',(#301776)); +#301776 = SURFACE_STYLE_FILL_AREA(#301777); +#301777 = FILL_AREA_STYLE('',(#301778)); +#301778 = FILL_AREA_STYLE_COLOUR('',#285989); +#301779 = CURVE_STYLE('',#301780,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301780 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301781 = OVER_RIDING_STYLED_ITEM('overriding color',(#301782),#48743, + #301763); +#301782 = PRESENTATION_STYLE_ASSIGNMENT((#301783,#301788)); +#301783 = SURFACE_STYLE_USAGE(.BOTH.,#301784); +#301784 = SURFACE_SIDE_STYLE('',(#301785)); +#301785 = SURFACE_STYLE_FILL_AREA(#301786); +#301786 = FILL_AREA_STYLE('',(#301787)); +#301787 = FILL_AREA_STYLE_COLOUR('',#285989); +#301788 = CURVE_STYLE('',#301789,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301789 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301790 = STYLED_ITEM('color',(#301791),#48762); +#301791 = PRESENTATION_STYLE_ASSIGNMENT((#301792,#301797)); +#301792 = SURFACE_STYLE_USAGE(.BOTH.,#301793); +#301793 = SURFACE_SIDE_STYLE('',(#301794)); +#301794 = SURFACE_STYLE_FILL_AREA(#301795); +#301795 = FILL_AREA_STYLE('',(#301796)); +#301796 = FILL_AREA_STYLE_COLOUR('',#285989); +#301797 = CURVE_STYLE('',#301798,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301798 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301799 = STYLED_ITEM('color',(#301800),#48779); +#301800 = PRESENTATION_STYLE_ASSIGNMENT((#301801,#301806)); +#301801 = SURFACE_STYLE_USAGE(.BOTH.,#301802); +#301802 = SURFACE_SIDE_STYLE('',(#301803)); +#301803 = SURFACE_STYLE_FILL_AREA(#301804); +#301804 = FILL_AREA_STYLE('',(#301805)); +#301805 = FILL_AREA_STYLE_COLOUR('',#285989); +#301806 = CURVE_STYLE('',#301807,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301807 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301808 = STYLED_ITEM('color',(#301809),#48796); +#301809 = PRESENTATION_STYLE_ASSIGNMENT((#301810,#301815)); +#301810 = SURFACE_STYLE_USAGE(.BOTH.,#301811); +#301811 = SURFACE_SIDE_STYLE('',(#301812)); +#301812 = SURFACE_STYLE_FILL_AREA(#301813); +#301813 = FILL_AREA_STYLE('',(#301814)); +#301814 = FILL_AREA_STYLE_COLOUR('',#285989); +#301815 = CURVE_STYLE('',#301816,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301816 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301817 = STYLED_ITEM('color',(#301818),#48813); +#301818 = PRESENTATION_STYLE_ASSIGNMENT((#301819,#301824)); +#301819 = SURFACE_STYLE_USAGE(.BOTH.,#301820); +#301820 = SURFACE_SIDE_STYLE('',(#301821)); +#301821 = SURFACE_STYLE_FILL_AREA(#301822); +#301822 = FILL_AREA_STYLE('',(#301823)); +#301823 = FILL_AREA_STYLE_COLOUR('',#285989); +#301824 = CURVE_STYLE('',#301825,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301825 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301826 = STYLED_ITEM('color',(#301827),#48830); +#301827 = PRESENTATION_STYLE_ASSIGNMENT((#301828,#301833)); +#301828 = SURFACE_STYLE_USAGE(.BOTH.,#301829); +#301829 = SURFACE_SIDE_STYLE('',(#301830)); +#301830 = SURFACE_STYLE_FILL_AREA(#301831); +#301831 = FILL_AREA_STYLE('',(#301832)); +#301832 = FILL_AREA_STYLE_COLOUR('',#285989); +#301833 = CURVE_STYLE('',#301834,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301834 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301835 = STYLED_ITEM('color',(#301836),#48842); +#301836 = PRESENTATION_STYLE_ASSIGNMENT((#301837,#301842)); +#301837 = SURFACE_STYLE_USAGE(.BOTH.,#301838); +#301838 = SURFACE_SIDE_STYLE('',(#301839)); +#301839 = SURFACE_STYLE_FILL_AREA(#301840); +#301840 = FILL_AREA_STYLE('',(#301841)); +#301841 = FILL_AREA_STYLE_COLOUR('',#285989); +#301842 = CURVE_STYLE('',#301843,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301843 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301844 = STYLED_ITEM('color',(#301845),#48859); +#301845 = PRESENTATION_STYLE_ASSIGNMENT((#301846,#301851)); +#301846 = SURFACE_STYLE_USAGE(.BOTH.,#301847); +#301847 = SURFACE_SIDE_STYLE('',(#301848)); +#301848 = SURFACE_STYLE_FILL_AREA(#301849); +#301849 = FILL_AREA_STYLE('',(#301850)); +#301850 = FILL_AREA_STYLE_COLOUR('',#285989); +#301851 = CURVE_STYLE('',#301852,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301852 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301853 = STYLED_ITEM('color',(#301854),#48876); +#301854 = PRESENTATION_STYLE_ASSIGNMENT((#301855,#301860)); +#301855 = SURFACE_STYLE_USAGE(.BOTH.,#301856); +#301856 = SURFACE_SIDE_STYLE('',(#301857)); +#301857 = SURFACE_STYLE_FILL_AREA(#301858); +#301858 = FILL_AREA_STYLE('',(#301859)); +#301859 = FILL_AREA_STYLE_COLOUR('',#285989); +#301860 = CURVE_STYLE('',#301861,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301861 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301862 = STYLED_ITEM('color',(#301863),#48893); +#301863 = PRESENTATION_STYLE_ASSIGNMENT((#301864,#301869)); +#301864 = SURFACE_STYLE_USAGE(.BOTH.,#301865); +#301865 = SURFACE_SIDE_STYLE('',(#301866)); +#301866 = SURFACE_STYLE_FILL_AREA(#301867); +#301867 = FILL_AREA_STYLE('',(#301868)); +#301868 = FILL_AREA_STYLE_COLOUR('',#285989); +#301869 = CURVE_STYLE('',#301870,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301870 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301871 = STYLED_ITEM('color',(#301872),#48910); +#301872 = PRESENTATION_STYLE_ASSIGNMENT((#301873,#301878)); +#301873 = SURFACE_STYLE_USAGE(.BOTH.,#301874); +#301874 = SURFACE_SIDE_STYLE('',(#301875)); +#301875 = SURFACE_STYLE_FILL_AREA(#301876); +#301876 = FILL_AREA_STYLE('',(#301877)); +#301877 = FILL_AREA_STYLE_COLOUR('',#285989); +#301878 = CURVE_STYLE('',#301879,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301879 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301880 = STYLED_ITEM('color',(#301881),#48922); +#301881 = PRESENTATION_STYLE_ASSIGNMENT((#301882,#301887)); +#301882 = SURFACE_STYLE_USAGE(.BOTH.,#301883); +#301883 = SURFACE_SIDE_STYLE('',(#301884)); +#301884 = SURFACE_STYLE_FILL_AREA(#301885); +#301885 = FILL_AREA_STYLE('',(#301886)); +#301886 = FILL_AREA_STYLE_COLOUR('',#285989); +#301887 = CURVE_STYLE('',#301888,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301888 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301889 = STYLED_ITEM('color',(#301890),#48939); +#301890 = PRESENTATION_STYLE_ASSIGNMENT((#301891,#301896)); +#301891 = SURFACE_STYLE_USAGE(.BOTH.,#301892); +#301892 = SURFACE_SIDE_STYLE('',(#301893)); +#301893 = SURFACE_STYLE_FILL_AREA(#301894); +#301894 = FILL_AREA_STYLE('',(#301895)); +#301895 = FILL_AREA_STYLE_COLOUR('',#285989); +#301896 = CURVE_STYLE('',#301897,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301897 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301898 = STYLED_ITEM('color',(#301899),#48956); +#301899 = PRESENTATION_STYLE_ASSIGNMENT((#301900,#301905)); +#301900 = SURFACE_STYLE_USAGE(.BOTH.,#301901); +#301901 = SURFACE_SIDE_STYLE('',(#301902)); +#301902 = SURFACE_STYLE_FILL_AREA(#301903); +#301903 = FILL_AREA_STYLE('',(#301904)); +#301904 = FILL_AREA_STYLE_COLOUR('',#285989); +#301905 = CURVE_STYLE('',#301906,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301906 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301907 = STYLED_ITEM('color',(#301908),#48973); +#301908 = PRESENTATION_STYLE_ASSIGNMENT((#301909,#301914)); +#301909 = SURFACE_STYLE_USAGE(.BOTH.,#301910); +#301910 = SURFACE_SIDE_STYLE('',(#301911)); +#301911 = SURFACE_STYLE_FILL_AREA(#301912); +#301912 = FILL_AREA_STYLE('',(#301913)); +#301913 = FILL_AREA_STYLE_COLOUR('',#285989); +#301914 = CURVE_STYLE('',#301915,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301915 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301916 = STYLED_ITEM('color',(#301917),#48990); +#301917 = PRESENTATION_STYLE_ASSIGNMENT((#301918,#301923)); +#301918 = SURFACE_STYLE_USAGE(.BOTH.,#301919); +#301919 = SURFACE_SIDE_STYLE('',(#301920)); +#301920 = SURFACE_STYLE_FILL_AREA(#301921); +#301921 = FILL_AREA_STYLE('',(#301922)); +#301922 = FILL_AREA_STYLE_COLOUR('',#285989); +#301923 = CURVE_STYLE('',#301924,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301924 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301925 = STYLED_ITEM('color',(#301926),#49002); +#301926 = PRESENTATION_STYLE_ASSIGNMENT((#301927,#301932)); +#301927 = SURFACE_STYLE_USAGE(.BOTH.,#301928); +#301928 = SURFACE_SIDE_STYLE('',(#301929)); +#301929 = SURFACE_STYLE_FILL_AREA(#301930); +#301930 = FILL_AREA_STYLE('',(#301931)); +#301931 = FILL_AREA_STYLE_COLOUR('',#285989); +#301932 = CURVE_STYLE('',#301933,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301933 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301934 = STYLED_ITEM('color',(#301935),#49019); +#301935 = PRESENTATION_STYLE_ASSIGNMENT((#301936,#301941)); +#301936 = SURFACE_STYLE_USAGE(.BOTH.,#301937); +#301937 = SURFACE_SIDE_STYLE('',(#301938)); +#301938 = SURFACE_STYLE_FILL_AREA(#301939); +#301939 = FILL_AREA_STYLE('',(#301940)); +#301940 = FILL_AREA_STYLE_COLOUR('',#285989); +#301941 = CURVE_STYLE('',#301942,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301942 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301943 = STYLED_ITEM('color',(#301944),#49036); +#301944 = PRESENTATION_STYLE_ASSIGNMENT((#301945,#301950)); +#301945 = SURFACE_STYLE_USAGE(.BOTH.,#301946); +#301946 = SURFACE_SIDE_STYLE('',(#301947)); +#301947 = SURFACE_STYLE_FILL_AREA(#301948); +#301948 = FILL_AREA_STYLE('',(#301949)); +#301949 = FILL_AREA_STYLE_COLOUR('',#285989); +#301950 = CURVE_STYLE('',#301951,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301951 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301952 = STYLED_ITEM('color',(#301953),#49053); +#301953 = PRESENTATION_STYLE_ASSIGNMENT((#301954,#301959)); +#301954 = SURFACE_STYLE_USAGE(.BOTH.,#301955); +#301955 = SURFACE_SIDE_STYLE('',(#301956)); +#301956 = SURFACE_STYLE_FILL_AREA(#301957); +#301957 = FILL_AREA_STYLE('',(#301958)); +#301958 = FILL_AREA_STYLE_COLOUR('',#285989); +#301959 = CURVE_STYLE('',#301960,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301960 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301961 = STYLED_ITEM('color',(#301962),#49070); +#301962 = PRESENTATION_STYLE_ASSIGNMENT((#301963,#301968)); +#301963 = SURFACE_STYLE_USAGE(.BOTH.,#301964); +#301964 = SURFACE_SIDE_STYLE('',(#301965)); +#301965 = SURFACE_STYLE_FILL_AREA(#301966); +#301966 = FILL_AREA_STYLE('',(#301967)); +#301967 = FILL_AREA_STYLE_COLOUR('',#285989); +#301968 = CURVE_STYLE('',#301969,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301969 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301970 = STYLED_ITEM('color',(#301971),#49082); +#301971 = PRESENTATION_STYLE_ASSIGNMENT((#301972,#301977)); +#301972 = SURFACE_STYLE_USAGE(.BOTH.,#301973); +#301973 = SURFACE_SIDE_STYLE('',(#301974)); +#301974 = SURFACE_STYLE_FILL_AREA(#301975); +#301975 = FILL_AREA_STYLE('',(#301976)); +#301976 = FILL_AREA_STYLE_COLOUR('',#285989); +#301977 = CURVE_STYLE('',#301978,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301978 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301979 = STYLED_ITEM('color',(#301980),#49099); +#301980 = PRESENTATION_STYLE_ASSIGNMENT((#301981,#301986)); +#301981 = SURFACE_STYLE_USAGE(.BOTH.,#301982); +#301982 = SURFACE_SIDE_STYLE('',(#301983)); +#301983 = SURFACE_STYLE_FILL_AREA(#301984); +#301984 = FILL_AREA_STYLE('',(#301985)); +#301985 = FILL_AREA_STYLE_COLOUR('',#285989); +#301986 = CURVE_STYLE('',#301987,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301987 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301988 = STYLED_ITEM('color',(#301989),#49116); +#301989 = PRESENTATION_STYLE_ASSIGNMENT((#301990,#301995)); +#301990 = SURFACE_STYLE_USAGE(.BOTH.,#301991); +#301991 = SURFACE_SIDE_STYLE('',(#301992)); +#301992 = SURFACE_STYLE_FILL_AREA(#301993); +#301993 = FILL_AREA_STYLE('',(#301994)); +#301994 = FILL_AREA_STYLE_COLOUR('',#285989); +#301995 = CURVE_STYLE('',#301996,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#301996 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#301997 = STYLED_ITEM('color',(#301998),#49133); +#301998 = PRESENTATION_STYLE_ASSIGNMENT((#301999,#302004)); +#301999 = SURFACE_STYLE_USAGE(.BOTH.,#302000); +#302000 = SURFACE_SIDE_STYLE('',(#302001)); +#302001 = SURFACE_STYLE_FILL_AREA(#302002); +#302002 = FILL_AREA_STYLE('',(#302003)); +#302003 = FILL_AREA_STYLE_COLOUR('',#285989); +#302004 = CURVE_STYLE('',#302005,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302005 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302006 = STYLED_ITEM('color',(#302007),#49150); +#302007 = PRESENTATION_STYLE_ASSIGNMENT((#302008,#302013)); +#302008 = SURFACE_STYLE_USAGE(.BOTH.,#302009); +#302009 = SURFACE_SIDE_STYLE('',(#302010)); +#302010 = SURFACE_STYLE_FILL_AREA(#302011); +#302011 = FILL_AREA_STYLE('',(#302012)); +#302012 = FILL_AREA_STYLE_COLOUR('',#285989); +#302013 = CURVE_STYLE('',#302014,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302014 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302015 = STYLED_ITEM('color',(#302016),#49162); +#302016 = PRESENTATION_STYLE_ASSIGNMENT((#302017,#302022)); +#302017 = SURFACE_STYLE_USAGE(.BOTH.,#302018); +#302018 = SURFACE_SIDE_STYLE('',(#302019)); +#302019 = SURFACE_STYLE_FILL_AREA(#302020); +#302020 = FILL_AREA_STYLE('',(#302021)); +#302021 = FILL_AREA_STYLE_COLOUR('',#285989); +#302022 = CURVE_STYLE('',#302023,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302023 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302024 = STYLED_ITEM('color',(#302025),#49179); +#302025 = PRESENTATION_STYLE_ASSIGNMENT((#302026,#302031)); +#302026 = SURFACE_STYLE_USAGE(.BOTH.,#302027); +#302027 = SURFACE_SIDE_STYLE('',(#302028)); +#302028 = SURFACE_STYLE_FILL_AREA(#302029); +#302029 = FILL_AREA_STYLE('',(#302030)); +#302030 = FILL_AREA_STYLE_COLOUR('',#285989); +#302031 = CURVE_STYLE('',#302032,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302032 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302033 = STYLED_ITEM('color',(#302034),#49196); +#302034 = PRESENTATION_STYLE_ASSIGNMENT((#302035,#302040)); +#302035 = SURFACE_STYLE_USAGE(.BOTH.,#302036); +#302036 = SURFACE_SIDE_STYLE('',(#302037)); +#302037 = SURFACE_STYLE_FILL_AREA(#302038); +#302038 = FILL_AREA_STYLE('',(#302039)); +#302039 = FILL_AREA_STYLE_COLOUR('',#285989); +#302040 = CURVE_STYLE('',#302041,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302041 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302042 = STYLED_ITEM('color',(#302043),#49213); +#302043 = PRESENTATION_STYLE_ASSIGNMENT((#302044,#302049)); +#302044 = SURFACE_STYLE_USAGE(.BOTH.,#302045); +#302045 = SURFACE_SIDE_STYLE('',(#302046)); +#302046 = SURFACE_STYLE_FILL_AREA(#302047); +#302047 = FILL_AREA_STYLE('',(#302048)); +#302048 = FILL_AREA_STYLE_COLOUR('',#285989); +#302049 = CURVE_STYLE('',#302050,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302050 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302051 = STYLED_ITEM('color',(#302052),#49230); +#302052 = PRESENTATION_STYLE_ASSIGNMENT((#302053,#302058)); +#302053 = SURFACE_STYLE_USAGE(.BOTH.,#302054); +#302054 = SURFACE_SIDE_STYLE('',(#302055)); +#302055 = SURFACE_STYLE_FILL_AREA(#302056); +#302056 = FILL_AREA_STYLE('',(#302057)); +#302057 = FILL_AREA_STYLE_COLOUR('',#285989); +#302058 = CURVE_STYLE('',#302059,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302059 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302060 = STYLED_ITEM('color',(#302061),#49242); +#302061 = PRESENTATION_STYLE_ASSIGNMENT((#302062,#302067)); +#302062 = SURFACE_STYLE_USAGE(.BOTH.,#302063); +#302063 = SURFACE_SIDE_STYLE('',(#302064)); +#302064 = SURFACE_STYLE_FILL_AREA(#302065); +#302065 = FILL_AREA_STYLE('',(#302066)); +#302066 = FILL_AREA_STYLE_COLOUR('',#285989); +#302067 = CURVE_STYLE('',#302068,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302068 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302069 = STYLED_ITEM('color',(#302070),#49259); +#302070 = PRESENTATION_STYLE_ASSIGNMENT((#302071,#302076)); +#302071 = SURFACE_STYLE_USAGE(.BOTH.,#302072); +#302072 = SURFACE_SIDE_STYLE('',(#302073)); +#302073 = SURFACE_STYLE_FILL_AREA(#302074); +#302074 = FILL_AREA_STYLE('',(#302075)); +#302075 = FILL_AREA_STYLE_COLOUR('',#285989); +#302076 = CURVE_STYLE('',#302077,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302077 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302078 = STYLED_ITEM('color',(#302079),#49276); +#302079 = PRESENTATION_STYLE_ASSIGNMENT((#302080,#302085)); +#302080 = SURFACE_STYLE_USAGE(.BOTH.,#302081); +#302081 = SURFACE_SIDE_STYLE('',(#302082)); +#302082 = SURFACE_STYLE_FILL_AREA(#302083); +#302083 = FILL_AREA_STYLE('',(#302084)); +#302084 = FILL_AREA_STYLE_COLOUR('',#285989); +#302085 = CURVE_STYLE('',#302086,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302086 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302087 = STYLED_ITEM('color',(#302088),#49293); +#302088 = PRESENTATION_STYLE_ASSIGNMENT((#302089,#302094)); +#302089 = SURFACE_STYLE_USAGE(.BOTH.,#302090); +#302090 = SURFACE_SIDE_STYLE('',(#302091)); +#302091 = SURFACE_STYLE_FILL_AREA(#302092); +#302092 = FILL_AREA_STYLE('',(#302093)); +#302093 = FILL_AREA_STYLE_COLOUR('',#285989); +#302094 = CURVE_STYLE('',#302095,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302095 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302096 = STYLED_ITEM('color',(#302097),#49310); +#302097 = PRESENTATION_STYLE_ASSIGNMENT((#302098,#302103)); +#302098 = SURFACE_STYLE_USAGE(.BOTH.,#302099); +#302099 = SURFACE_SIDE_STYLE('',(#302100)); +#302100 = SURFACE_STYLE_FILL_AREA(#302101); +#302101 = FILL_AREA_STYLE('',(#302102)); +#302102 = FILL_AREA_STYLE_COLOUR('',#285989); +#302103 = CURVE_STYLE('',#302104,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302104 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302105 = STYLED_ITEM('color',(#302106),#49322); +#302106 = PRESENTATION_STYLE_ASSIGNMENT((#302107,#302112)); +#302107 = SURFACE_STYLE_USAGE(.BOTH.,#302108); +#302108 = SURFACE_SIDE_STYLE('',(#302109)); +#302109 = SURFACE_STYLE_FILL_AREA(#302110); +#302110 = FILL_AREA_STYLE('',(#302111)); +#302111 = FILL_AREA_STYLE_COLOUR('',#285989); +#302112 = CURVE_STYLE('',#302113,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302113 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302114 = STYLED_ITEM('color',(#302115),#49339); +#302115 = PRESENTATION_STYLE_ASSIGNMENT((#302116,#302121)); +#302116 = SURFACE_STYLE_USAGE(.BOTH.,#302117); +#302117 = SURFACE_SIDE_STYLE('',(#302118)); +#302118 = SURFACE_STYLE_FILL_AREA(#302119); +#302119 = FILL_AREA_STYLE('',(#302120)); +#302120 = FILL_AREA_STYLE_COLOUR('',#285989); +#302121 = CURVE_STYLE('',#302122,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302122 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302123 = STYLED_ITEM('color',(#302124),#49356); +#302124 = PRESENTATION_STYLE_ASSIGNMENT((#302125,#302130)); +#302125 = SURFACE_STYLE_USAGE(.BOTH.,#302126); +#302126 = SURFACE_SIDE_STYLE('',(#302127)); +#302127 = SURFACE_STYLE_FILL_AREA(#302128); +#302128 = FILL_AREA_STYLE('',(#302129)); +#302129 = FILL_AREA_STYLE_COLOUR('',#285989); +#302130 = CURVE_STYLE('',#302131,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302131 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302132 = STYLED_ITEM('color',(#302133),#49373); +#302133 = PRESENTATION_STYLE_ASSIGNMENT((#302134,#302139)); +#302134 = SURFACE_STYLE_USAGE(.BOTH.,#302135); +#302135 = SURFACE_SIDE_STYLE('',(#302136)); +#302136 = SURFACE_STYLE_FILL_AREA(#302137); +#302137 = FILL_AREA_STYLE('',(#302138)); +#302138 = FILL_AREA_STYLE_COLOUR('',#285989); +#302139 = CURVE_STYLE('',#302140,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302140 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302141 = STYLED_ITEM('color',(#302142),#49390); +#302142 = PRESENTATION_STYLE_ASSIGNMENT((#302143,#302148)); +#302143 = SURFACE_STYLE_USAGE(.BOTH.,#302144); +#302144 = SURFACE_SIDE_STYLE('',(#302145)); +#302145 = SURFACE_STYLE_FILL_AREA(#302146); +#302146 = FILL_AREA_STYLE('',(#302147)); +#302147 = FILL_AREA_STYLE_COLOUR('',#285989); +#302148 = CURVE_STYLE('',#302149,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302149 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302150 = STYLED_ITEM('color',(#302151),#49402); +#302151 = PRESENTATION_STYLE_ASSIGNMENT((#302152,#302157)); +#302152 = SURFACE_STYLE_USAGE(.BOTH.,#302153); +#302153 = SURFACE_SIDE_STYLE('',(#302154)); +#302154 = SURFACE_STYLE_FILL_AREA(#302155); +#302155 = FILL_AREA_STYLE('',(#302156)); +#302156 = FILL_AREA_STYLE_COLOUR('',#285989); +#302157 = CURVE_STYLE('',#302158,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302158 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302159 = STYLED_ITEM('color',(#302160),#49419); +#302160 = PRESENTATION_STYLE_ASSIGNMENT((#302161,#302166)); +#302161 = SURFACE_STYLE_USAGE(.BOTH.,#302162); +#302162 = SURFACE_SIDE_STYLE('',(#302163)); +#302163 = SURFACE_STYLE_FILL_AREA(#302164); +#302164 = FILL_AREA_STYLE('',(#302165)); +#302165 = FILL_AREA_STYLE_COLOUR('',#285989); +#302166 = CURVE_STYLE('',#302167,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302167 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302168 = STYLED_ITEM('color',(#302169),#49436); +#302169 = PRESENTATION_STYLE_ASSIGNMENT((#302170,#302175)); +#302170 = SURFACE_STYLE_USAGE(.BOTH.,#302171); +#302171 = SURFACE_SIDE_STYLE('',(#302172)); +#302172 = SURFACE_STYLE_FILL_AREA(#302173); +#302173 = FILL_AREA_STYLE('',(#302174)); +#302174 = FILL_AREA_STYLE_COLOUR('',#285989); +#302175 = CURVE_STYLE('',#302176,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302176 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302177 = STYLED_ITEM('color',(#302178),#49453); +#302178 = PRESENTATION_STYLE_ASSIGNMENT((#302179,#302184)); +#302179 = SURFACE_STYLE_USAGE(.BOTH.,#302180); +#302180 = SURFACE_SIDE_STYLE('',(#302181)); +#302181 = SURFACE_STYLE_FILL_AREA(#302182); +#302182 = FILL_AREA_STYLE('',(#302183)); +#302183 = FILL_AREA_STYLE_COLOUR('',#285989); +#302184 = CURVE_STYLE('',#302185,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302185 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302186 = STYLED_ITEM('color',(#302187),#49470); +#302187 = PRESENTATION_STYLE_ASSIGNMENT((#302188,#302193)); +#302188 = SURFACE_STYLE_USAGE(.BOTH.,#302189); +#302189 = SURFACE_SIDE_STYLE('',(#302190)); +#302190 = SURFACE_STYLE_FILL_AREA(#302191); +#302191 = FILL_AREA_STYLE('',(#302192)); +#302192 = FILL_AREA_STYLE_COLOUR('',#285989); +#302193 = CURVE_STYLE('',#302194,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302194 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302195 = STYLED_ITEM('color',(#302196),#49482); +#302196 = PRESENTATION_STYLE_ASSIGNMENT((#302197,#302202)); +#302197 = SURFACE_STYLE_USAGE(.BOTH.,#302198); +#302198 = SURFACE_SIDE_STYLE('',(#302199)); +#302199 = SURFACE_STYLE_FILL_AREA(#302200); +#302200 = FILL_AREA_STYLE('',(#302201)); +#302201 = FILL_AREA_STYLE_COLOUR('',#285989); +#302202 = CURVE_STYLE('',#302203,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302203 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302204 = STYLED_ITEM('color',(#302205),#49499); +#302205 = PRESENTATION_STYLE_ASSIGNMENT((#302206,#302211)); +#302206 = SURFACE_STYLE_USAGE(.BOTH.,#302207); +#302207 = SURFACE_SIDE_STYLE('',(#302208)); +#302208 = SURFACE_STYLE_FILL_AREA(#302209); +#302209 = FILL_AREA_STYLE('',(#302210)); +#302210 = FILL_AREA_STYLE_COLOUR('',#285989); +#302211 = CURVE_STYLE('',#302212,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302212 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302213 = STYLED_ITEM('color',(#302214),#49516); +#302214 = PRESENTATION_STYLE_ASSIGNMENT((#302215,#302220)); +#302215 = SURFACE_STYLE_USAGE(.BOTH.,#302216); +#302216 = SURFACE_SIDE_STYLE('',(#302217)); +#302217 = SURFACE_STYLE_FILL_AREA(#302218); +#302218 = FILL_AREA_STYLE('',(#302219)); +#302219 = FILL_AREA_STYLE_COLOUR('',#285989); +#302220 = CURVE_STYLE('',#302221,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302221 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302222 = STYLED_ITEM('color',(#302223),#49533); +#302223 = PRESENTATION_STYLE_ASSIGNMENT((#302224,#302229)); +#302224 = SURFACE_STYLE_USAGE(.BOTH.,#302225); +#302225 = SURFACE_SIDE_STYLE('',(#302226)); +#302226 = SURFACE_STYLE_FILL_AREA(#302227); +#302227 = FILL_AREA_STYLE('',(#302228)); +#302228 = FILL_AREA_STYLE_COLOUR('',#285989); +#302229 = CURVE_STYLE('',#302230,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302230 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302231 = STYLED_ITEM('color',(#302232),#49550); +#302232 = PRESENTATION_STYLE_ASSIGNMENT((#302233,#302238)); +#302233 = SURFACE_STYLE_USAGE(.BOTH.,#302234); +#302234 = SURFACE_SIDE_STYLE('',(#302235)); +#302235 = SURFACE_STYLE_FILL_AREA(#302236); +#302236 = FILL_AREA_STYLE('',(#302237)); +#302237 = FILL_AREA_STYLE_COLOUR('',#285989); +#302238 = CURVE_STYLE('',#302239,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302239 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302240 = STYLED_ITEM('color',(#302241),#49562); +#302241 = PRESENTATION_STYLE_ASSIGNMENT((#302242,#302247)); +#302242 = SURFACE_STYLE_USAGE(.BOTH.,#302243); +#302243 = SURFACE_SIDE_STYLE('',(#302244)); +#302244 = SURFACE_STYLE_FILL_AREA(#302245); +#302245 = FILL_AREA_STYLE('',(#302246)); +#302246 = FILL_AREA_STYLE_COLOUR('',#270350); +#302247 = CURVE_STYLE('',#302248,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302248 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302249 = OVER_RIDING_STYLED_ITEM('overriding color',(#302250),#49569, + #302240); +#302250 = PRESENTATION_STYLE_ASSIGNMENT((#302251,#302256)); +#302251 = SURFACE_STYLE_USAGE(.BOTH.,#302252); +#302252 = SURFACE_SIDE_STYLE('',(#302253)); +#302253 = SURFACE_STYLE_FILL_AREA(#302254); +#302254 = FILL_AREA_STYLE('',(#302255)); +#302255 = FILL_AREA_STYLE_COLOUR('',#285989); +#302256 = CURVE_STYLE('',#302257,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302257 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302258 = STYLED_ITEM('color',(#302259),#49579); +#302259 = PRESENTATION_STYLE_ASSIGNMENT((#302260,#302265)); +#302260 = SURFACE_STYLE_USAGE(.BOTH.,#302261); +#302261 = SURFACE_SIDE_STYLE('',(#302262)); +#302262 = SURFACE_STYLE_FILL_AREA(#302263); +#302263 = FILL_AREA_STYLE('',(#302264)); +#302264 = FILL_AREA_STYLE_COLOUR('',#270350); +#302265 = CURVE_STYLE('',#302266,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302266 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302267 = OVER_RIDING_STYLED_ITEM('overriding color',(#302268),#49584, + #302258); +#302268 = PRESENTATION_STYLE_ASSIGNMENT((#302269,#302274)); +#302269 = SURFACE_STYLE_USAGE(.BOTH.,#302270); +#302270 = SURFACE_SIDE_STYLE('',(#302271)); +#302271 = SURFACE_STYLE_FILL_AREA(#302272); +#302272 = FILL_AREA_STYLE('',(#302273)); +#302273 = FILL_AREA_STYLE_COLOUR('',#285989); +#302274 = CURVE_STYLE('',#302275,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302275 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302276 = STYLED_ITEM('color',(#302277),#49596); +#302277 = PRESENTATION_STYLE_ASSIGNMENT((#302278,#302283)); +#302278 = SURFACE_STYLE_USAGE(.BOTH.,#302279); +#302279 = SURFACE_SIDE_STYLE('',(#302280)); +#302280 = SURFACE_STYLE_FILL_AREA(#302281); +#302281 = FILL_AREA_STYLE('',(#302282)); +#302282 = FILL_AREA_STYLE_COLOUR('',#285989); +#302283 = CURVE_STYLE('',#302284,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302284 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302285 = STYLED_ITEM('color',(#302286),#49645); +#302286 = PRESENTATION_STYLE_ASSIGNMENT((#302287,#302292)); +#302287 = SURFACE_STYLE_USAGE(.BOTH.,#302288); +#302288 = SURFACE_SIDE_STYLE('',(#302289)); +#302289 = SURFACE_STYLE_FILL_AREA(#302290); +#302290 = FILL_AREA_STYLE('',(#302291)); +#302291 = FILL_AREA_STYLE_COLOUR('',#285989); +#302292 = CURVE_STYLE('',#302293,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302293 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302294 = STYLED_ITEM('color',(#302295),#49669); +#302295 = PRESENTATION_STYLE_ASSIGNMENT((#302296,#302301)); +#302296 = SURFACE_STYLE_USAGE(.BOTH.,#302297); +#302297 = SURFACE_SIDE_STYLE('',(#302298)); +#302298 = SURFACE_STYLE_FILL_AREA(#302299); +#302299 = FILL_AREA_STYLE('',(#302300)); +#302300 = FILL_AREA_STYLE_COLOUR('',#285989); +#302301 = CURVE_STYLE('',#302302,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302302 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302303 = STYLED_ITEM('color',(#302304),#49711); +#302304 = PRESENTATION_STYLE_ASSIGNMENT((#302305,#302310)); +#302305 = SURFACE_STYLE_USAGE(.BOTH.,#302306); +#302306 = SURFACE_SIDE_STYLE('',(#302307)); +#302307 = SURFACE_STYLE_FILL_AREA(#302308); +#302308 = FILL_AREA_STYLE('',(#302309)); +#302309 = FILL_AREA_STYLE_COLOUR('',#285989); +#302310 = CURVE_STYLE('',#302311,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302311 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302312 = STYLED_ITEM('color',(#302313),#49728); +#302313 = PRESENTATION_STYLE_ASSIGNMENT((#302314,#302319)); +#302314 = SURFACE_STYLE_USAGE(.BOTH.,#302315); +#302315 = SURFACE_SIDE_STYLE('',(#302316)); +#302316 = SURFACE_STYLE_FILL_AREA(#302317); +#302317 = FILL_AREA_STYLE('',(#302318)); +#302318 = FILL_AREA_STYLE_COLOUR('',#270350); +#302319 = CURVE_STYLE('',#302320,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302320 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302321 = OVER_RIDING_STYLED_ITEM('overriding color',(#302322),#49735, + #302312); +#302322 = PRESENTATION_STYLE_ASSIGNMENT((#302323,#302328)); +#302323 = SURFACE_STYLE_USAGE(.BOTH.,#302324); +#302324 = SURFACE_SIDE_STYLE('',(#302325)); +#302325 = SURFACE_STYLE_FILL_AREA(#302326); +#302326 = FILL_AREA_STYLE('',(#302327)); +#302327 = FILL_AREA_STYLE_COLOUR('',#285989); +#302328 = CURVE_STYLE('',#302329,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302329 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302330 = STYLED_ITEM('color',(#302331),#49745); +#302331 = PRESENTATION_STYLE_ASSIGNMENT((#302332,#302337)); +#302332 = SURFACE_STYLE_USAGE(.BOTH.,#302333); +#302333 = SURFACE_SIDE_STYLE('',(#302334)); +#302334 = SURFACE_STYLE_FILL_AREA(#302335); +#302335 = FILL_AREA_STYLE('',(#302336)); +#302336 = FILL_AREA_STYLE_COLOUR('',#270350); +#302337 = CURVE_STYLE('',#302338,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302338 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302339 = OVER_RIDING_STYLED_ITEM('overriding color',(#302340),#49750, + #302330); +#302340 = PRESENTATION_STYLE_ASSIGNMENT((#302341,#302346)); +#302341 = SURFACE_STYLE_USAGE(.BOTH.,#302342); +#302342 = SURFACE_SIDE_STYLE('',(#302343)); +#302343 = SURFACE_STYLE_FILL_AREA(#302344); +#302344 = FILL_AREA_STYLE('',(#302345)); +#302345 = FILL_AREA_STYLE_COLOUR('',#285989); +#302346 = CURVE_STYLE('',#302347,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302347 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302348 = STYLED_ITEM('color',(#302349),#49762); +#302349 = PRESENTATION_STYLE_ASSIGNMENT((#302350,#302355)); +#302350 = SURFACE_STYLE_USAGE(.BOTH.,#302351); +#302351 = SURFACE_SIDE_STYLE('',(#302352)); +#302352 = SURFACE_STYLE_FILL_AREA(#302353); +#302353 = FILL_AREA_STYLE('',(#302354)); +#302354 = FILL_AREA_STYLE_COLOUR('',#285989); +#302355 = CURVE_STYLE('',#302356,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302356 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302357 = STYLED_ITEM('color',(#302358),#49811); +#302358 = PRESENTATION_STYLE_ASSIGNMENT((#302359,#302364)); +#302359 = SURFACE_STYLE_USAGE(.BOTH.,#302360); +#302360 = SURFACE_SIDE_STYLE('',(#302361)); +#302361 = SURFACE_STYLE_FILL_AREA(#302362); +#302362 = FILL_AREA_STYLE('',(#302363)); +#302363 = FILL_AREA_STYLE_COLOUR('',#285989); +#302364 = CURVE_STYLE('',#302365,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302365 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302366 = STYLED_ITEM('color',(#302367),#49835); +#302367 = PRESENTATION_STYLE_ASSIGNMENT((#302368,#302373)); +#302368 = SURFACE_STYLE_USAGE(.BOTH.,#302369); +#302369 = SURFACE_SIDE_STYLE('',(#302370)); +#302370 = SURFACE_STYLE_FILL_AREA(#302371); +#302371 = FILL_AREA_STYLE('',(#302372)); +#302372 = FILL_AREA_STYLE_COLOUR('',#285989); +#302373 = CURVE_STYLE('',#302374,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302374 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302375 = STYLED_ITEM('color',(#302376),#49877); +#302376 = PRESENTATION_STYLE_ASSIGNMENT((#302377,#302382)); +#302377 = SURFACE_STYLE_USAGE(.BOTH.,#302378); +#302378 = SURFACE_SIDE_STYLE('',(#302379)); +#302379 = SURFACE_STYLE_FILL_AREA(#302380); +#302380 = FILL_AREA_STYLE('',(#302381)); +#302381 = FILL_AREA_STYLE_COLOUR('',#285989); +#302382 = CURVE_STYLE('',#302383,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302383 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302384 = STYLED_ITEM('color',(#302385),#49894); +#302385 = PRESENTATION_STYLE_ASSIGNMENT((#302386,#302391)); +#302386 = SURFACE_STYLE_USAGE(.BOTH.,#302387); +#302387 = SURFACE_SIDE_STYLE('',(#302388)); +#302388 = SURFACE_STYLE_FILL_AREA(#302389); +#302389 = FILL_AREA_STYLE('',(#302390)); +#302390 = FILL_AREA_STYLE_COLOUR('',#270350); +#302391 = CURVE_STYLE('',#302392,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302392 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302393 = OVER_RIDING_STYLED_ITEM('overriding color',(#302394),#49901, + #302384); +#302394 = PRESENTATION_STYLE_ASSIGNMENT((#302395,#302400)); +#302395 = SURFACE_STYLE_USAGE(.BOTH.,#302396); +#302396 = SURFACE_SIDE_STYLE('',(#302397)); +#302397 = SURFACE_STYLE_FILL_AREA(#302398); +#302398 = FILL_AREA_STYLE('',(#302399)); +#302399 = FILL_AREA_STYLE_COLOUR('',#285989); +#302400 = CURVE_STYLE('',#302401,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302401 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302402 = STYLED_ITEM('color',(#302403),#49911); +#302403 = PRESENTATION_STYLE_ASSIGNMENT((#302404,#302409)); +#302404 = SURFACE_STYLE_USAGE(.BOTH.,#302405); +#302405 = SURFACE_SIDE_STYLE('',(#302406)); +#302406 = SURFACE_STYLE_FILL_AREA(#302407); +#302407 = FILL_AREA_STYLE('',(#302408)); +#302408 = FILL_AREA_STYLE_COLOUR('',#270350); +#302409 = CURVE_STYLE('',#302410,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302410 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302411 = OVER_RIDING_STYLED_ITEM('overriding color',(#302412),#49916, + #302402); +#302412 = PRESENTATION_STYLE_ASSIGNMENT((#302413,#302418)); +#302413 = SURFACE_STYLE_USAGE(.BOTH.,#302414); +#302414 = SURFACE_SIDE_STYLE('',(#302415)); +#302415 = SURFACE_STYLE_FILL_AREA(#302416); +#302416 = FILL_AREA_STYLE('',(#302417)); +#302417 = FILL_AREA_STYLE_COLOUR('',#285989); +#302418 = CURVE_STYLE('',#302419,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302419 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302420 = STYLED_ITEM('color',(#302421),#49928); +#302421 = PRESENTATION_STYLE_ASSIGNMENT((#302422,#302427)); +#302422 = SURFACE_STYLE_USAGE(.BOTH.,#302423); +#302423 = SURFACE_SIDE_STYLE('',(#302424)); +#302424 = SURFACE_STYLE_FILL_AREA(#302425); +#302425 = FILL_AREA_STYLE('',(#302426)); +#302426 = FILL_AREA_STYLE_COLOUR('',#285989); +#302427 = CURVE_STYLE('',#302428,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302428 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302429 = STYLED_ITEM('color',(#302430),#49977); +#302430 = PRESENTATION_STYLE_ASSIGNMENT((#302431,#302436)); +#302431 = SURFACE_STYLE_USAGE(.BOTH.,#302432); +#302432 = SURFACE_SIDE_STYLE('',(#302433)); +#302433 = SURFACE_STYLE_FILL_AREA(#302434); +#302434 = FILL_AREA_STYLE('',(#302435)); +#302435 = FILL_AREA_STYLE_COLOUR('',#285989); +#302436 = CURVE_STYLE('',#302437,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302437 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302438 = STYLED_ITEM('color',(#302439),#50001); +#302439 = PRESENTATION_STYLE_ASSIGNMENT((#302440,#302445)); +#302440 = SURFACE_STYLE_USAGE(.BOTH.,#302441); +#302441 = SURFACE_SIDE_STYLE('',(#302442)); +#302442 = SURFACE_STYLE_FILL_AREA(#302443); +#302443 = FILL_AREA_STYLE('',(#302444)); +#302444 = FILL_AREA_STYLE_COLOUR('',#285989); +#302445 = CURVE_STYLE('',#302446,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302446 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302447 = STYLED_ITEM('color',(#302448),#50043); +#302448 = PRESENTATION_STYLE_ASSIGNMENT((#302449,#302454)); +#302449 = SURFACE_STYLE_USAGE(.BOTH.,#302450); +#302450 = SURFACE_SIDE_STYLE('',(#302451)); +#302451 = SURFACE_STYLE_FILL_AREA(#302452); +#302452 = FILL_AREA_STYLE('',(#302453)); +#302453 = FILL_AREA_STYLE_COLOUR('',#285989); +#302454 = CURVE_STYLE('',#302455,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302455 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302456 = STYLED_ITEM('color',(#302457),#50060); +#302457 = PRESENTATION_STYLE_ASSIGNMENT((#302458,#302463)); +#302458 = SURFACE_STYLE_USAGE(.BOTH.,#302459); +#302459 = SURFACE_SIDE_STYLE('',(#302460)); +#302460 = SURFACE_STYLE_FILL_AREA(#302461); +#302461 = FILL_AREA_STYLE('',(#302462)); +#302462 = FILL_AREA_STYLE_COLOUR('',#270350); +#302463 = CURVE_STYLE('',#302464,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302464 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302465 = OVER_RIDING_STYLED_ITEM('overriding color',(#302466),#50067, + #302456); +#302466 = PRESENTATION_STYLE_ASSIGNMENT((#302467,#302472)); +#302467 = SURFACE_STYLE_USAGE(.BOTH.,#302468); +#302468 = SURFACE_SIDE_STYLE('',(#302469)); +#302469 = SURFACE_STYLE_FILL_AREA(#302470); +#302470 = FILL_AREA_STYLE('',(#302471)); +#302471 = FILL_AREA_STYLE_COLOUR('',#285989); +#302472 = CURVE_STYLE('',#302473,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302473 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302474 = STYLED_ITEM('color',(#302475),#50077); +#302475 = PRESENTATION_STYLE_ASSIGNMENT((#302476,#302481)); +#302476 = SURFACE_STYLE_USAGE(.BOTH.,#302477); +#302477 = SURFACE_SIDE_STYLE('',(#302478)); +#302478 = SURFACE_STYLE_FILL_AREA(#302479); +#302479 = FILL_AREA_STYLE('',(#302480)); +#302480 = FILL_AREA_STYLE_COLOUR('',#270350); +#302481 = CURVE_STYLE('',#302482,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302482 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302483 = OVER_RIDING_STYLED_ITEM('overriding color',(#302484),#50082, + #302474); +#302484 = PRESENTATION_STYLE_ASSIGNMENT((#302485,#302490)); +#302485 = SURFACE_STYLE_USAGE(.BOTH.,#302486); +#302486 = SURFACE_SIDE_STYLE('',(#302487)); +#302487 = SURFACE_STYLE_FILL_AREA(#302488); +#302488 = FILL_AREA_STYLE('',(#302489)); +#302489 = FILL_AREA_STYLE_COLOUR('',#285989); +#302490 = CURVE_STYLE('',#302491,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302491 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302492 = STYLED_ITEM('color',(#302493),#50094); +#302493 = PRESENTATION_STYLE_ASSIGNMENT((#302494,#302499)); +#302494 = SURFACE_STYLE_USAGE(.BOTH.,#302495); +#302495 = SURFACE_SIDE_STYLE('',(#302496)); +#302496 = SURFACE_STYLE_FILL_AREA(#302497); +#302497 = FILL_AREA_STYLE('',(#302498)); +#302498 = FILL_AREA_STYLE_COLOUR('',#285989); +#302499 = CURVE_STYLE('',#302500,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302500 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302501 = STYLED_ITEM('color',(#302502),#50143); +#302502 = PRESENTATION_STYLE_ASSIGNMENT((#302503,#302508)); +#302503 = SURFACE_STYLE_USAGE(.BOTH.,#302504); +#302504 = SURFACE_SIDE_STYLE('',(#302505)); +#302505 = SURFACE_STYLE_FILL_AREA(#302506); +#302506 = FILL_AREA_STYLE('',(#302507)); +#302507 = FILL_AREA_STYLE_COLOUR('',#285989); +#302508 = CURVE_STYLE('',#302509,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302509 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302510 = STYLED_ITEM('color',(#302511),#50167); +#302511 = PRESENTATION_STYLE_ASSIGNMENT((#302512,#302517)); +#302512 = SURFACE_STYLE_USAGE(.BOTH.,#302513); +#302513 = SURFACE_SIDE_STYLE('',(#302514)); +#302514 = SURFACE_STYLE_FILL_AREA(#302515); +#302515 = FILL_AREA_STYLE('',(#302516)); +#302516 = FILL_AREA_STYLE_COLOUR('',#285989); +#302517 = CURVE_STYLE('',#302518,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302518 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302519 = STYLED_ITEM('color',(#302520),#50209); +#302520 = PRESENTATION_STYLE_ASSIGNMENT((#302521,#302526)); +#302521 = SURFACE_STYLE_USAGE(.BOTH.,#302522); +#302522 = SURFACE_SIDE_STYLE('',(#302523)); +#302523 = SURFACE_STYLE_FILL_AREA(#302524); +#302524 = FILL_AREA_STYLE('',(#302525)); +#302525 = FILL_AREA_STYLE_COLOUR('',#285989); +#302526 = CURVE_STYLE('',#302527,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302527 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302528 = STYLED_ITEM('color',(#302529),#50226); +#302529 = PRESENTATION_STYLE_ASSIGNMENT((#302530,#302535)); +#302530 = SURFACE_STYLE_USAGE(.BOTH.,#302531); +#302531 = SURFACE_SIDE_STYLE('',(#302532)); +#302532 = SURFACE_STYLE_FILL_AREA(#302533); +#302533 = FILL_AREA_STYLE('',(#302534)); +#302534 = FILL_AREA_STYLE_COLOUR('',#270350); +#302535 = CURVE_STYLE('',#302536,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302536 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302537 = OVER_RIDING_STYLED_ITEM('overriding color',(#302538),#50233, + #302528); +#302538 = PRESENTATION_STYLE_ASSIGNMENT((#302539,#302544)); +#302539 = SURFACE_STYLE_USAGE(.BOTH.,#302540); +#302540 = SURFACE_SIDE_STYLE('',(#302541)); +#302541 = SURFACE_STYLE_FILL_AREA(#302542); +#302542 = FILL_AREA_STYLE('',(#302543)); +#302543 = FILL_AREA_STYLE_COLOUR('',#285989); +#302544 = CURVE_STYLE('',#302545,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302545 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302546 = STYLED_ITEM('color',(#302547),#50243); +#302547 = PRESENTATION_STYLE_ASSIGNMENT((#302548,#302553)); +#302548 = SURFACE_STYLE_USAGE(.BOTH.,#302549); +#302549 = SURFACE_SIDE_STYLE('',(#302550)); +#302550 = SURFACE_STYLE_FILL_AREA(#302551); +#302551 = FILL_AREA_STYLE('',(#302552)); +#302552 = FILL_AREA_STYLE_COLOUR('',#270350); +#302553 = CURVE_STYLE('',#302554,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302554 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302555 = OVER_RIDING_STYLED_ITEM('overriding color',(#302556),#50248, + #302546); +#302556 = PRESENTATION_STYLE_ASSIGNMENT((#302557,#302562)); +#302557 = SURFACE_STYLE_USAGE(.BOTH.,#302558); +#302558 = SURFACE_SIDE_STYLE('',(#302559)); +#302559 = SURFACE_STYLE_FILL_AREA(#302560); +#302560 = FILL_AREA_STYLE('',(#302561)); +#302561 = FILL_AREA_STYLE_COLOUR('',#285989); +#302562 = CURVE_STYLE('',#302563,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302563 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302564 = STYLED_ITEM('color',(#302565),#50260); +#302565 = PRESENTATION_STYLE_ASSIGNMENT((#302566,#302571)); +#302566 = SURFACE_STYLE_USAGE(.BOTH.,#302567); +#302567 = SURFACE_SIDE_STYLE('',(#302568)); +#302568 = SURFACE_STYLE_FILL_AREA(#302569); +#302569 = FILL_AREA_STYLE('',(#302570)); +#302570 = FILL_AREA_STYLE_COLOUR('',#285989); +#302571 = CURVE_STYLE('',#302572,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302572 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302573 = STYLED_ITEM('color',(#302574),#50309); +#302574 = PRESENTATION_STYLE_ASSIGNMENT((#302575,#302580)); +#302575 = SURFACE_STYLE_USAGE(.BOTH.,#302576); +#302576 = SURFACE_SIDE_STYLE('',(#302577)); +#302577 = SURFACE_STYLE_FILL_AREA(#302578); +#302578 = FILL_AREA_STYLE('',(#302579)); +#302579 = FILL_AREA_STYLE_COLOUR('',#285989); +#302580 = CURVE_STYLE('',#302581,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302581 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302582 = STYLED_ITEM('color',(#302583),#50333); +#302583 = PRESENTATION_STYLE_ASSIGNMENT((#302584,#302589)); +#302584 = SURFACE_STYLE_USAGE(.BOTH.,#302585); +#302585 = SURFACE_SIDE_STYLE('',(#302586)); +#302586 = SURFACE_STYLE_FILL_AREA(#302587); +#302587 = FILL_AREA_STYLE('',(#302588)); +#302588 = FILL_AREA_STYLE_COLOUR('',#285989); +#302589 = CURVE_STYLE('',#302590,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302590 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302591 = STYLED_ITEM('color',(#302592),#50375); +#302592 = PRESENTATION_STYLE_ASSIGNMENT((#302593,#302598)); +#302593 = SURFACE_STYLE_USAGE(.BOTH.,#302594); +#302594 = SURFACE_SIDE_STYLE('',(#302595)); +#302595 = SURFACE_STYLE_FILL_AREA(#302596); +#302596 = FILL_AREA_STYLE('',(#302597)); +#302597 = FILL_AREA_STYLE_COLOUR('',#285989); +#302598 = CURVE_STYLE('',#302599,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302599 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302600 = STYLED_ITEM('color',(#302601),#50392); +#302601 = PRESENTATION_STYLE_ASSIGNMENT((#302602,#302607)); +#302602 = SURFACE_STYLE_USAGE(.BOTH.,#302603); +#302603 = SURFACE_SIDE_STYLE('',(#302604)); +#302604 = SURFACE_STYLE_FILL_AREA(#302605); +#302605 = FILL_AREA_STYLE('',(#302606)); +#302606 = FILL_AREA_STYLE_COLOUR('',#270350); +#302607 = CURVE_STYLE('',#302608,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302608 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302609 = OVER_RIDING_STYLED_ITEM('overriding color',(#302610),#50399, + #302600); +#302610 = PRESENTATION_STYLE_ASSIGNMENT((#302611,#302616)); +#302611 = SURFACE_STYLE_USAGE(.BOTH.,#302612); +#302612 = SURFACE_SIDE_STYLE('',(#302613)); +#302613 = SURFACE_STYLE_FILL_AREA(#302614); +#302614 = FILL_AREA_STYLE('',(#302615)); +#302615 = FILL_AREA_STYLE_COLOUR('',#285989); +#302616 = CURVE_STYLE('',#302617,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302617 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302618 = STYLED_ITEM('color',(#302619),#50409); +#302619 = PRESENTATION_STYLE_ASSIGNMENT((#302620,#302625)); +#302620 = SURFACE_STYLE_USAGE(.BOTH.,#302621); +#302621 = SURFACE_SIDE_STYLE('',(#302622)); +#302622 = SURFACE_STYLE_FILL_AREA(#302623); +#302623 = FILL_AREA_STYLE('',(#302624)); +#302624 = FILL_AREA_STYLE_COLOUR('',#270350); +#302625 = CURVE_STYLE('',#302626,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302626 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302627 = OVER_RIDING_STYLED_ITEM('overriding color',(#302628),#50414, + #302618); +#302628 = PRESENTATION_STYLE_ASSIGNMENT((#302629,#302634)); +#302629 = SURFACE_STYLE_USAGE(.BOTH.,#302630); +#302630 = SURFACE_SIDE_STYLE('',(#302631)); +#302631 = SURFACE_STYLE_FILL_AREA(#302632); +#302632 = FILL_AREA_STYLE('',(#302633)); +#302633 = FILL_AREA_STYLE_COLOUR('',#285989); +#302634 = CURVE_STYLE('',#302635,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302635 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302636 = STYLED_ITEM('color',(#302637),#50426); +#302637 = PRESENTATION_STYLE_ASSIGNMENT((#302638,#302643)); +#302638 = SURFACE_STYLE_USAGE(.BOTH.,#302639); +#302639 = SURFACE_SIDE_STYLE('',(#302640)); +#302640 = SURFACE_STYLE_FILL_AREA(#302641); +#302641 = FILL_AREA_STYLE('',(#302642)); +#302642 = FILL_AREA_STYLE_COLOUR('',#285989); +#302643 = CURVE_STYLE('',#302644,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302644 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302645 = STYLED_ITEM('color',(#302646),#50475); +#302646 = PRESENTATION_STYLE_ASSIGNMENT((#302647,#302652)); +#302647 = SURFACE_STYLE_USAGE(.BOTH.,#302648); +#302648 = SURFACE_SIDE_STYLE('',(#302649)); +#302649 = SURFACE_STYLE_FILL_AREA(#302650); +#302650 = FILL_AREA_STYLE('',(#302651)); +#302651 = FILL_AREA_STYLE_COLOUR('',#285989); +#302652 = CURVE_STYLE('',#302653,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302653 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302654 = STYLED_ITEM('color',(#302655),#50499); +#302655 = PRESENTATION_STYLE_ASSIGNMENT((#302656,#302661)); +#302656 = SURFACE_STYLE_USAGE(.BOTH.,#302657); +#302657 = SURFACE_SIDE_STYLE('',(#302658)); +#302658 = SURFACE_STYLE_FILL_AREA(#302659); +#302659 = FILL_AREA_STYLE('',(#302660)); +#302660 = FILL_AREA_STYLE_COLOUR('',#285989); +#302661 = CURVE_STYLE('',#302662,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302662 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302663 = STYLED_ITEM('color',(#302664),#50541); +#302664 = PRESENTATION_STYLE_ASSIGNMENT((#302665,#302670)); +#302665 = SURFACE_STYLE_USAGE(.BOTH.,#302666); +#302666 = SURFACE_SIDE_STYLE('',(#302667)); +#302667 = SURFACE_STYLE_FILL_AREA(#302668); +#302668 = FILL_AREA_STYLE('',(#302669)); +#302669 = FILL_AREA_STYLE_COLOUR('',#285989); +#302670 = CURVE_STYLE('',#302671,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302671 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302672 = STYLED_ITEM('color',(#302673),#50558); +#302673 = PRESENTATION_STYLE_ASSIGNMENT((#302674,#302679)); +#302674 = SURFACE_STYLE_USAGE(.BOTH.,#302675); +#302675 = SURFACE_SIDE_STYLE('',(#302676)); +#302676 = SURFACE_STYLE_FILL_AREA(#302677); +#302677 = FILL_AREA_STYLE('',(#302678)); +#302678 = FILL_AREA_STYLE_COLOUR('',#270350); +#302679 = CURVE_STYLE('',#302680,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302680 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302681 = OVER_RIDING_STYLED_ITEM('overriding color',(#302682),#50565, + #302672); +#302682 = PRESENTATION_STYLE_ASSIGNMENT((#302683,#302688)); +#302683 = SURFACE_STYLE_USAGE(.BOTH.,#302684); +#302684 = SURFACE_SIDE_STYLE('',(#302685)); +#302685 = SURFACE_STYLE_FILL_AREA(#302686); +#302686 = FILL_AREA_STYLE('',(#302687)); +#302687 = FILL_AREA_STYLE_COLOUR('',#285989); +#302688 = CURVE_STYLE('',#302689,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302689 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302690 = STYLED_ITEM('color',(#302691),#50575); +#302691 = PRESENTATION_STYLE_ASSIGNMENT((#302692,#302697)); +#302692 = SURFACE_STYLE_USAGE(.BOTH.,#302693); +#302693 = SURFACE_SIDE_STYLE('',(#302694)); +#302694 = SURFACE_STYLE_FILL_AREA(#302695); +#302695 = FILL_AREA_STYLE('',(#302696)); +#302696 = FILL_AREA_STYLE_COLOUR('',#270350); +#302697 = CURVE_STYLE('',#302698,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302698 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302699 = OVER_RIDING_STYLED_ITEM('overriding color',(#302700),#50580, + #302690); +#302700 = PRESENTATION_STYLE_ASSIGNMENT((#302701,#302706)); +#302701 = SURFACE_STYLE_USAGE(.BOTH.,#302702); +#302702 = SURFACE_SIDE_STYLE('',(#302703)); +#302703 = SURFACE_STYLE_FILL_AREA(#302704); +#302704 = FILL_AREA_STYLE('',(#302705)); +#302705 = FILL_AREA_STYLE_COLOUR('',#285989); +#302706 = CURVE_STYLE('',#302707,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302707 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302708 = STYLED_ITEM('color',(#302709),#50592); +#302709 = PRESENTATION_STYLE_ASSIGNMENT((#302710,#302715)); +#302710 = SURFACE_STYLE_USAGE(.BOTH.,#302711); +#302711 = SURFACE_SIDE_STYLE('',(#302712)); +#302712 = SURFACE_STYLE_FILL_AREA(#302713); +#302713 = FILL_AREA_STYLE('',(#302714)); +#302714 = FILL_AREA_STYLE_COLOUR('',#285989); +#302715 = CURVE_STYLE('',#302716,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302716 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302717 = STYLED_ITEM('color',(#302718),#50641); +#302718 = PRESENTATION_STYLE_ASSIGNMENT((#302719,#302724)); +#302719 = SURFACE_STYLE_USAGE(.BOTH.,#302720); +#302720 = SURFACE_SIDE_STYLE('',(#302721)); +#302721 = SURFACE_STYLE_FILL_AREA(#302722); +#302722 = FILL_AREA_STYLE('',(#302723)); +#302723 = FILL_AREA_STYLE_COLOUR('',#285989); +#302724 = CURVE_STYLE('',#302725,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302725 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302726 = STYLED_ITEM('color',(#302727),#50665); +#302727 = PRESENTATION_STYLE_ASSIGNMENT((#302728,#302733)); +#302728 = SURFACE_STYLE_USAGE(.BOTH.,#302729); +#302729 = SURFACE_SIDE_STYLE('',(#302730)); +#302730 = SURFACE_STYLE_FILL_AREA(#302731); +#302731 = FILL_AREA_STYLE('',(#302732)); +#302732 = FILL_AREA_STYLE_COLOUR('',#285989); +#302733 = CURVE_STYLE('',#302734,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302734 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302735 = STYLED_ITEM('color',(#302736),#50707); +#302736 = PRESENTATION_STYLE_ASSIGNMENT((#302737,#302742)); +#302737 = SURFACE_STYLE_USAGE(.BOTH.,#302738); +#302738 = SURFACE_SIDE_STYLE('',(#302739)); +#302739 = SURFACE_STYLE_FILL_AREA(#302740); +#302740 = FILL_AREA_STYLE('',(#302741)); +#302741 = FILL_AREA_STYLE_COLOUR('',#285989); +#302742 = CURVE_STYLE('',#302743,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302743 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302744 = STYLED_ITEM('color',(#302745),#50724); +#302745 = PRESENTATION_STYLE_ASSIGNMENT((#302746,#302751)); +#302746 = SURFACE_STYLE_USAGE(.BOTH.,#302747); +#302747 = SURFACE_SIDE_STYLE('',(#302748)); +#302748 = SURFACE_STYLE_FILL_AREA(#302749); +#302749 = FILL_AREA_STYLE('',(#302750)); +#302750 = FILL_AREA_STYLE_COLOUR('',#270350); +#302751 = CURVE_STYLE('',#302752,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302752 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302753 = OVER_RIDING_STYLED_ITEM('overriding color',(#302754),#50731, + #302744); +#302754 = PRESENTATION_STYLE_ASSIGNMENT((#302755,#302760)); +#302755 = SURFACE_STYLE_USAGE(.BOTH.,#302756); +#302756 = SURFACE_SIDE_STYLE('',(#302757)); +#302757 = SURFACE_STYLE_FILL_AREA(#302758); +#302758 = FILL_AREA_STYLE('',(#302759)); +#302759 = FILL_AREA_STYLE_COLOUR('',#285989); +#302760 = CURVE_STYLE('',#302761,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302761 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302762 = STYLED_ITEM('color',(#302763),#50741); +#302763 = PRESENTATION_STYLE_ASSIGNMENT((#302764,#302769)); +#302764 = SURFACE_STYLE_USAGE(.BOTH.,#302765); +#302765 = SURFACE_SIDE_STYLE('',(#302766)); +#302766 = SURFACE_STYLE_FILL_AREA(#302767); +#302767 = FILL_AREA_STYLE('',(#302768)); +#302768 = FILL_AREA_STYLE_COLOUR('',#270350); +#302769 = CURVE_STYLE('',#302770,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302770 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302771 = OVER_RIDING_STYLED_ITEM('overriding color',(#302772),#50746, + #302762); +#302772 = PRESENTATION_STYLE_ASSIGNMENT((#302773,#302778)); +#302773 = SURFACE_STYLE_USAGE(.BOTH.,#302774); +#302774 = SURFACE_SIDE_STYLE('',(#302775)); +#302775 = SURFACE_STYLE_FILL_AREA(#302776); +#302776 = FILL_AREA_STYLE('',(#302777)); +#302777 = FILL_AREA_STYLE_COLOUR('',#285989); +#302778 = CURVE_STYLE('',#302779,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302779 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302780 = STYLED_ITEM('color',(#302781),#50758); +#302781 = PRESENTATION_STYLE_ASSIGNMENT((#302782,#302787)); +#302782 = SURFACE_STYLE_USAGE(.BOTH.,#302783); +#302783 = SURFACE_SIDE_STYLE('',(#302784)); +#302784 = SURFACE_STYLE_FILL_AREA(#302785); +#302785 = FILL_AREA_STYLE('',(#302786)); +#302786 = FILL_AREA_STYLE_COLOUR('',#285989); +#302787 = CURVE_STYLE('',#302788,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302788 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302789 = STYLED_ITEM('color',(#302790),#50807); +#302790 = PRESENTATION_STYLE_ASSIGNMENT((#302791,#302796)); +#302791 = SURFACE_STYLE_USAGE(.BOTH.,#302792); +#302792 = SURFACE_SIDE_STYLE('',(#302793)); +#302793 = SURFACE_STYLE_FILL_AREA(#302794); +#302794 = FILL_AREA_STYLE('',(#302795)); +#302795 = FILL_AREA_STYLE_COLOUR('',#285989); +#302796 = CURVE_STYLE('',#302797,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302797 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302798 = STYLED_ITEM('color',(#302799),#50831); +#302799 = PRESENTATION_STYLE_ASSIGNMENT((#302800,#302805)); +#302800 = SURFACE_STYLE_USAGE(.BOTH.,#302801); +#302801 = SURFACE_SIDE_STYLE('',(#302802)); +#302802 = SURFACE_STYLE_FILL_AREA(#302803); +#302803 = FILL_AREA_STYLE('',(#302804)); +#302804 = FILL_AREA_STYLE_COLOUR('',#285989); +#302805 = CURVE_STYLE('',#302806,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302806 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302807 = STYLED_ITEM('color',(#302808),#50873); +#302808 = PRESENTATION_STYLE_ASSIGNMENT((#302809,#302814)); +#302809 = SURFACE_STYLE_USAGE(.BOTH.,#302810); +#302810 = SURFACE_SIDE_STYLE('',(#302811)); +#302811 = SURFACE_STYLE_FILL_AREA(#302812); +#302812 = FILL_AREA_STYLE('',(#302813)); +#302813 = FILL_AREA_STYLE_COLOUR('',#285989); +#302814 = CURVE_STYLE('',#302815,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302815 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302816 = STYLED_ITEM('color',(#302817),#50890); +#302817 = PRESENTATION_STYLE_ASSIGNMENT((#302818,#302823)); +#302818 = SURFACE_STYLE_USAGE(.BOTH.,#302819); +#302819 = SURFACE_SIDE_STYLE('',(#302820)); +#302820 = SURFACE_STYLE_FILL_AREA(#302821); +#302821 = FILL_AREA_STYLE('',(#302822)); +#302822 = FILL_AREA_STYLE_COLOUR('',#270350); +#302823 = CURVE_STYLE('',#302824,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302824 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302825 = OVER_RIDING_STYLED_ITEM('overriding color',(#302826),#50897, + #302816); +#302826 = PRESENTATION_STYLE_ASSIGNMENT((#302827,#302832)); +#302827 = SURFACE_STYLE_USAGE(.BOTH.,#302828); +#302828 = SURFACE_SIDE_STYLE('',(#302829)); +#302829 = SURFACE_STYLE_FILL_AREA(#302830); +#302830 = FILL_AREA_STYLE('',(#302831)); +#302831 = FILL_AREA_STYLE_COLOUR('',#285989); +#302832 = CURVE_STYLE('',#302833,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302833 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302834 = STYLED_ITEM('color',(#302835),#50907); +#302835 = PRESENTATION_STYLE_ASSIGNMENT((#302836,#302841)); +#302836 = SURFACE_STYLE_USAGE(.BOTH.,#302837); +#302837 = SURFACE_SIDE_STYLE('',(#302838)); +#302838 = SURFACE_STYLE_FILL_AREA(#302839); +#302839 = FILL_AREA_STYLE('',(#302840)); +#302840 = FILL_AREA_STYLE_COLOUR('',#270350); +#302841 = CURVE_STYLE('',#302842,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302842 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302843 = OVER_RIDING_STYLED_ITEM('overriding color',(#302844),#50912, + #302834); +#302844 = PRESENTATION_STYLE_ASSIGNMENT((#302845,#302850)); +#302845 = SURFACE_STYLE_USAGE(.BOTH.,#302846); +#302846 = SURFACE_SIDE_STYLE('',(#302847)); +#302847 = SURFACE_STYLE_FILL_AREA(#302848); +#302848 = FILL_AREA_STYLE('',(#302849)); +#302849 = FILL_AREA_STYLE_COLOUR('',#285989); +#302850 = CURVE_STYLE('',#302851,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302851 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302852 = STYLED_ITEM('color',(#302853),#50924); +#302853 = PRESENTATION_STYLE_ASSIGNMENT((#302854,#302859)); +#302854 = SURFACE_STYLE_USAGE(.BOTH.,#302855); +#302855 = SURFACE_SIDE_STYLE('',(#302856)); +#302856 = SURFACE_STYLE_FILL_AREA(#302857); +#302857 = FILL_AREA_STYLE('',(#302858)); +#302858 = FILL_AREA_STYLE_COLOUR('',#285989); +#302859 = CURVE_STYLE('',#302860,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302860 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302861 = STYLED_ITEM('color',(#302862),#50973); +#302862 = PRESENTATION_STYLE_ASSIGNMENT((#302863,#302868)); +#302863 = SURFACE_STYLE_USAGE(.BOTH.,#302864); +#302864 = SURFACE_SIDE_STYLE('',(#302865)); +#302865 = SURFACE_STYLE_FILL_AREA(#302866); +#302866 = FILL_AREA_STYLE('',(#302867)); +#302867 = FILL_AREA_STYLE_COLOUR('',#285989); +#302868 = CURVE_STYLE('',#302869,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302869 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302870 = STYLED_ITEM('color',(#302871),#50997); +#302871 = PRESENTATION_STYLE_ASSIGNMENT((#302872,#302877)); +#302872 = SURFACE_STYLE_USAGE(.BOTH.,#302873); +#302873 = SURFACE_SIDE_STYLE('',(#302874)); +#302874 = SURFACE_STYLE_FILL_AREA(#302875); +#302875 = FILL_AREA_STYLE('',(#302876)); +#302876 = FILL_AREA_STYLE_COLOUR('',#285989); +#302877 = CURVE_STYLE('',#302878,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302878 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302879 = STYLED_ITEM('color',(#302880),#51039); +#302880 = PRESENTATION_STYLE_ASSIGNMENT((#302881,#302886)); +#302881 = SURFACE_STYLE_USAGE(.BOTH.,#302882); +#302882 = SURFACE_SIDE_STYLE('',(#302883)); +#302883 = SURFACE_STYLE_FILL_AREA(#302884); +#302884 = FILL_AREA_STYLE('',(#302885)); +#302885 = FILL_AREA_STYLE_COLOUR('',#285989); +#302886 = CURVE_STYLE('',#302887,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302887 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302888 = STYLED_ITEM('color',(#302889),#51056); +#302889 = PRESENTATION_STYLE_ASSIGNMENT((#302890,#302895)); +#302890 = SURFACE_STYLE_USAGE(.BOTH.,#302891); +#302891 = SURFACE_SIDE_STYLE('',(#302892)); +#302892 = SURFACE_STYLE_FILL_AREA(#302893); +#302893 = FILL_AREA_STYLE('',(#302894)); +#302894 = FILL_AREA_STYLE_COLOUR('',#270350); +#302895 = CURVE_STYLE('',#302896,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302896 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302897 = OVER_RIDING_STYLED_ITEM('overriding color',(#302898),#51063, + #302888); +#302898 = PRESENTATION_STYLE_ASSIGNMENT((#302899,#302904)); +#302899 = SURFACE_STYLE_USAGE(.BOTH.,#302900); +#302900 = SURFACE_SIDE_STYLE('',(#302901)); +#302901 = SURFACE_STYLE_FILL_AREA(#302902); +#302902 = FILL_AREA_STYLE('',(#302903)); +#302903 = FILL_AREA_STYLE_COLOUR('',#285989); +#302904 = CURVE_STYLE('',#302905,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302905 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302906 = STYLED_ITEM('color',(#302907),#51073); +#302907 = PRESENTATION_STYLE_ASSIGNMENT((#302908,#302913)); +#302908 = SURFACE_STYLE_USAGE(.BOTH.,#302909); +#302909 = SURFACE_SIDE_STYLE('',(#302910)); +#302910 = SURFACE_STYLE_FILL_AREA(#302911); +#302911 = FILL_AREA_STYLE('',(#302912)); +#302912 = FILL_AREA_STYLE_COLOUR('',#270350); +#302913 = CURVE_STYLE('',#302914,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#302914 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302915 = OVER_RIDING_STYLED_ITEM('overriding color',(#302916),#51078, + #302906); +#302916 = PRESENTATION_STYLE_ASSIGNMENT((#302917,#302922)); +#302917 = SURFACE_STYLE_USAGE(.BOTH.,#302918); +#302918 = SURFACE_SIDE_STYLE('',(#302919)); +#302919 = SURFACE_STYLE_FILL_AREA(#302920); +#302920 = FILL_AREA_STYLE('',(#302921)); +#302921 = FILL_AREA_STYLE_COLOUR('',#285989); +#302922 = CURVE_STYLE('',#302923,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302923 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302924 = STYLED_ITEM('color',(#302925),#51090); +#302925 = PRESENTATION_STYLE_ASSIGNMENT((#302926,#302931)); +#302926 = SURFACE_STYLE_USAGE(.BOTH.,#302927); +#302927 = SURFACE_SIDE_STYLE('',(#302928)); +#302928 = SURFACE_STYLE_FILL_AREA(#302929); +#302929 = FILL_AREA_STYLE('',(#302930)); +#302930 = FILL_AREA_STYLE_COLOUR('',#285989); +#302931 = CURVE_STYLE('',#302932,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302932 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302933 = STYLED_ITEM('color',(#302934),#51139); +#302934 = PRESENTATION_STYLE_ASSIGNMENT((#302935,#302940)); +#302935 = SURFACE_STYLE_USAGE(.BOTH.,#302936); +#302936 = SURFACE_SIDE_STYLE('',(#302937)); +#302937 = SURFACE_STYLE_FILL_AREA(#302938); +#302938 = FILL_AREA_STYLE('',(#302939)); +#302939 = FILL_AREA_STYLE_COLOUR('',#285989); +#302940 = CURVE_STYLE('',#302941,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302941 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302942 = STYLED_ITEM('color',(#302943),#51163); +#302943 = PRESENTATION_STYLE_ASSIGNMENT((#302944,#302949)); +#302944 = SURFACE_STYLE_USAGE(.BOTH.,#302945); +#302945 = SURFACE_SIDE_STYLE('',(#302946)); +#302946 = SURFACE_STYLE_FILL_AREA(#302947); +#302947 = FILL_AREA_STYLE('',(#302948)); +#302948 = FILL_AREA_STYLE_COLOUR('',#285989); +#302949 = CURVE_STYLE('',#302950,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302950 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302951 = STYLED_ITEM('color',(#302952),#51205); +#302952 = PRESENTATION_STYLE_ASSIGNMENT((#302953,#302958)); +#302953 = SURFACE_STYLE_USAGE(.BOTH.,#302954); +#302954 = SURFACE_SIDE_STYLE('',(#302955)); +#302955 = SURFACE_STYLE_FILL_AREA(#302956); +#302956 = FILL_AREA_STYLE('',(#302957)); +#302957 = FILL_AREA_STYLE_COLOUR('',#285989); +#302958 = CURVE_STYLE('',#302959,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302959 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302960 = STYLED_ITEM('color',(#302961),#51222); +#302961 = PRESENTATION_STYLE_ASSIGNMENT((#302962,#302967)); +#302962 = SURFACE_STYLE_USAGE(.BOTH.,#302963); +#302963 = SURFACE_SIDE_STYLE('',(#302964)); +#302964 = SURFACE_STYLE_FILL_AREA(#302965); +#302965 = FILL_AREA_STYLE('',(#302966)); +#302966 = FILL_AREA_STYLE_COLOUR('',#285989); +#302967 = CURVE_STYLE('',#302968,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302968 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302969 = STYLED_ITEM('color',(#302970),#51239); +#302970 = PRESENTATION_STYLE_ASSIGNMENT((#302971,#302976)); +#302971 = SURFACE_STYLE_USAGE(.BOTH.,#302972); +#302972 = SURFACE_SIDE_STYLE('',(#302973)); +#302973 = SURFACE_STYLE_FILL_AREA(#302974); +#302974 = FILL_AREA_STYLE('',(#302975)); +#302975 = FILL_AREA_STYLE_COLOUR('',#285989); +#302976 = CURVE_STYLE('',#302977,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302977 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302978 = STYLED_ITEM('color',(#302979),#51256); +#302979 = PRESENTATION_STYLE_ASSIGNMENT((#302980,#302985)); +#302980 = SURFACE_STYLE_USAGE(.BOTH.,#302981); +#302981 = SURFACE_SIDE_STYLE('',(#302982)); +#302982 = SURFACE_STYLE_FILL_AREA(#302983); +#302983 = FILL_AREA_STYLE('',(#302984)); +#302984 = FILL_AREA_STYLE_COLOUR('',#285989); +#302985 = CURVE_STYLE('',#302986,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302986 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302987 = STYLED_ITEM('color',(#302988),#51268); +#302988 = PRESENTATION_STYLE_ASSIGNMENT((#302989,#302994)); +#302989 = SURFACE_STYLE_USAGE(.BOTH.,#302990); +#302990 = SURFACE_SIDE_STYLE('',(#302991)); +#302991 = SURFACE_STYLE_FILL_AREA(#302992); +#302992 = FILL_AREA_STYLE('',(#302993)); +#302993 = FILL_AREA_STYLE_COLOUR('',#285989); +#302994 = CURVE_STYLE('',#302995,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#302995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#302996 = STYLED_ITEM('color',(#302997),#51285); +#302997 = PRESENTATION_STYLE_ASSIGNMENT((#302998,#303003)); +#302998 = SURFACE_STYLE_USAGE(.BOTH.,#302999); +#302999 = SURFACE_SIDE_STYLE('',(#303000)); +#303000 = SURFACE_STYLE_FILL_AREA(#303001); +#303001 = FILL_AREA_STYLE('',(#303002)); +#303002 = FILL_AREA_STYLE_COLOUR('',#285989); +#303003 = CURVE_STYLE('',#303004,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303004 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303005 = STYLED_ITEM('color',(#303006),#51302); +#303006 = PRESENTATION_STYLE_ASSIGNMENT((#303007,#303012)); +#303007 = SURFACE_STYLE_USAGE(.BOTH.,#303008); +#303008 = SURFACE_SIDE_STYLE('',(#303009)); +#303009 = SURFACE_STYLE_FILL_AREA(#303010); +#303010 = FILL_AREA_STYLE('',(#303011)); +#303011 = FILL_AREA_STYLE_COLOUR('',#285989); +#303012 = CURVE_STYLE('',#303013,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303013 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303014 = STYLED_ITEM('color',(#303015),#51314); +#303015 = PRESENTATION_STYLE_ASSIGNMENT((#303016,#303021)); +#303016 = SURFACE_STYLE_USAGE(.BOTH.,#303017); +#303017 = SURFACE_SIDE_STYLE('',(#303018)); +#303018 = SURFACE_STYLE_FILL_AREA(#303019); +#303019 = FILL_AREA_STYLE('',(#303020)); +#303020 = FILL_AREA_STYLE_COLOUR('',#285989); +#303021 = CURVE_STYLE('',#303022,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303023 = STYLED_ITEM('color',(#303024),#51331); +#303024 = PRESENTATION_STYLE_ASSIGNMENT((#303025,#303030)); +#303025 = SURFACE_STYLE_USAGE(.BOTH.,#303026); +#303026 = SURFACE_SIDE_STYLE('',(#303027)); +#303027 = SURFACE_STYLE_FILL_AREA(#303028); +#303028 = FILL_AREA_STYLE('',(#303029)); +#303029 = FILL_AREA_STYLE_COLOUR('',#285989); +#303030 = CURVE_STYLE('',#303031,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303031 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303032 = STYLED_ITEM('color',(#303033),#51348); +#303033 = PRESENTATION_STYLE_ASSIGNMENT((#303034,#303039)); +#303034 = SURFACE_STYLE_USAGE(.BOTH.,#303035); +#303035 = SURFACE_SIDE_STYLE('',(#303036)); +#303036 = SURFACE_STYLE_FILL_AREA(#303037); +#303037 = FILL_AREA_STYLE('',(#303038)); +#303038 = FILL_AREA_STYLE_COLOUR('',#285989); +#303039 = CURVE_STYLE('',#303040,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303040 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303041 = STYLED_ITEM('color',(#303042),#51360); +#303042 = PRESENTATION_STYLE_ASSIGNMENT((#303043,#303048)); +#303043 = SURFACE_STYLE_USAGE(.BOTH.,#303044); +#303044 = SURFACE_SIDE_STYLE('',(#303045)); +#303045 = SURFACE_STYLE_FILL_AREA(#303046); +#303046 = FILL_AREA_STYLE('',(#303047)); +#303047 = FILL_AREA_STYLE_COLOUR('',#285989); +#303048 = CURVE_STYLE('',#303049,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303049 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303050 = STYLED_ITEM('color',(#303051),#51377); +#303051 = PRESENTATION_STYLE_ASSIGNMENT((#303052,#303057)); +#303052 = SURFACE_STYLE_USAGE(.BOTH.,#303053); +#303053 = SURFACE_SIDE_STYLE('',(#303054)); +#303054 = SURFACE_STYLE_FILL_AREA(#303055); +#303055 = FILL_AREA_STYLE('',(#303056)); +#303056 = FILL_AREA_STYLE_COLOUR('',#285989); +#303057 = CURVE_STYLE('',#303058,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303058 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303059 = STYLED_ITEM('color',(#303060),#51394); +#303060 = PRESENTATION_STYLE_ASSIGNMENT((#303061,#303066)); +#303061 = SURFACE_STYLE_USAGE(.BOTH.,#303062); +#303062 = SURFACE_SIDE_STYLE('',(#303063)); +#303063 = SURFACE_STYLE_FILL_AREA(#303064); +#303064 = FILL_AREA_STYLE('',(#303065)); +#303065 = FILL_AREA_STYLE_COLOUR('',#285989); +#303066 = CURVE_STYLE('',#303067,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303067 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303068 = STYLED_ITEM('color',(#303069),#51406); +#303069 = PRESENTATION_STYLE_ASSIGNMENT((#303070,#303075)); +#303070 = SURFACE_STYLE_USAGE(.BOTH.,#303071); +#303071 = SURFACE_SIDE_STYLE('',(#303072)); +#303072 = SURFACE_STYLE_FILL_AREA(#303073); +#303073 = FILL_AREA_STYLE('',(#303074)); +#303074 = FILL_AREA_STYLE_COLOUR('',#285989); +#303075 = CURVE_STYLE('',#303076,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303076 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303077 = STYLED_ITEM('color',(#303078),#51423); +#303078 = PRESENTATION_STYLE_ASSIGNMENT((#303079,#303084)); +#303079 = SURFACE_STYLE_USAGE(.BOTH.,#303080); +#303080 = SURFACE_SIDE_STYLE('',(#303081)); +#303081 = SURFACE_STYLE_FILL_AREA(#303082); +#303082 = FILL_AREA_STYLE('',(#303083)); +#303083 = FILL_AREA_STYLE_COLOUR('',#285989); +#303084 = CURVE_STYLE('',#303085,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303085 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303086 = STYLED_ITEM('color',(#303087),#51440); +#303087 = PRESENTATION_STYLE_ASSIGNMENT((#303088,#303093)); +#303088 = SURFACE_STYLE_USAGE(.BOTH.,#303089); +#303089 = SURFACE_SIDE_STYLE('',(#303090)); +#303090 = SURFACE_STYLE_FILL_AREA(#303091); +#303091 = FILL_AREA_STYLE('',(#303092)); +#303092 = FILL_AREA_STYLE_COLOUR('',#285989); +#303093 = CURVE_STYLE('',#303094,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303094 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303095 = STYLED_ITEM('color',(#303096),#51452); +#303096 = PRESENTATION_STYLE_ASSIGNMENT((#303097,#303102)); +#303097 = SURFACE_STYLE_USAGE(.BOTH.,#303098); +#303098 = SURFACE_SIDE_STYLE('',(#303099)); +#303099 = SURFACE_STYLE_FILL_AREA(#303100); +#303100 = FILL_AREA_STYLE('',(#303101)); +#303101 = FILL_AREA_STYLE_COLOUR('',#285989); +#303102 = CURVE_STYLE('',#303103,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303103 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303104 = STYLED_ITEM('color',(#303105),#51469); +#303105 = PRESENTATION_STYLE_ASSIGNMENT((#303106,#303111)); +#303106 = SURFACE_STYLE_USAGE(.BOTH.,#303107); +#303107 = SURFACE_SIDE_STYLE('',(#303108)); +#303108 = SURFACE_STYLE_FILL_AREA(#303109); +#303109 = FILL_AREA_STYLE('',(#303110)); +#303110 = FILL_AREA_STYLE_COLOUR('',#285989); +#303111 = CURVE_STYLE('',#303112,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303112 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303113 = STYLED_ITEM('color',(#303114),#51486); +#303114 = PRESENTATION_STYLE_ASSIGNMENT((#303115,#303120)); +#303115 = SURFACE_STYLE_USAGE(.BOTH.,#303116); +#303116 = SURFACE_SIDE_STYLE('',(#303117)); +#303117 = SURFACE_STYLE_FILL_AREA(#303118); +#303118 = FILL_AREA_STYLE('',(#303119)); +#303119 = FILL_AREA_STYLE_COLOUR('',#285989); +#303120 = CURVE_STYLE('',#303121,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303121 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303122 = STYLED_ITEM('color',(#303123),#51498); +#303123 = PRESENTATION_STYLE_ASSIGNMENT((#303124,#303129)); +#303124 = SURFACE_STYLE_USAGE(.BOTH.,#303125); +#303125 = SURFACE_SIDE_STYLE('',(#303126)); +#303126 = SURFACE_STYLE_FILL_AREA(#303127); +#303127 = FILL_AREA_STYLE('',(#303128)); +#303128 = FILL_AREA_STYLE_COLOUR('',#285989); +#303129 = CURVE_STYLE('',#303130,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303130 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303131 = STYLED_ITEM('color',(#303132),#51515); +#303132 = PRESENTATION_STYLE_ASSIGNMENT((#303133,#303138)); +#303133 = SURFACE_STYLE_USAGE(.BOTH.,#303134); +#303134 = SURFACE_SIDE_STYLE('',(#303135)); +#303135 = SURFACE_STYLE_FILL_AREA(#303136); +#303136 = FILL_AREA_STYLE('',(#303137)); +#303137 = FILL_AREA_STYLE_COLOUR('',#285989); +#303138 = CURVE_STYLE('',#303139,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303139 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303140 = STYLED_ITEM('color',(#303141),#51532); +#303141 = PRESENTATION_STYLE_ASSIGNMENT((#303142,#303147)); +#303142 = SURFACE_STYLE_USAGE(.BOTH.,#303143); +#303143 = SURFACE_SIDE_STYLE('',(#303144)); +#303144 = SURFACE_STYLE_FILL_AREA(#303145); +#303145 = FILL_AREA_STYLE('',(#303146)); +#303146 = FILL_AREA_STYLE_COLOUR('',#285989); +#303147 = CURVE_STYLE('',#303148,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303148 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303149 = STYLED_ITEM('color',(#303150),#51544); +#303150 = PRESENTATION_STYLE_ASSIGNMENT((#303151,#303156)); +#303151 = SURFACE_STYLE_USAGE(.BOTH.,#303152); +#303152 = SURFACE_SIDE_STYLE('',(#303153)); +#303153 = SURFACE_STYLE_FILL_AREA(#303154); +#303154 = FILL_AREA_STYLE('',(#303155)); +#303155 = FILL_AREA_STYLE_COLOUR('',#285989); +#303156 = CURVE_STYLE('',#303157,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303157 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303158 = STYLED_ITEM('color',(#303159),#51561); +#303159 = PRESENTATION_STYLE_ASSIGNMENT((#303160,#303165)); +#303160 = SURFACE_STYLE_USAGE(.BOTH.,#303161); +#303161 = SURFACE_SIDE_STYLE('',(#303162)); +#303162 = SURFACE_STYLE_FILL_AREA(#303163); +#303163 = FILL_AREA_STYLE('',(#303164)); +#303164 = FILL_AREA_STYLE_COLOUR('',#285989); +#303165 = CURVE_STYLE('',#303166,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303166 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303167 = STYLED_ITEM('color',(#303168),#51578); +#303168 = PRESENTATION_STYLE_ASSIGNMENT((#303169,#303174)); +#303169 = SURFACE_STYLE_USAGE(.BOTH.,#303170); +#303170 = SURFACE_SIDE_STYLE('',(#303171)); +#303171 = SURFACE_STYLE_FILL_AREA(#303172); +#303172 = FILL_AREA_STYLE('',(#303173)); +#303173 = FILL_AREA_STYLE_COLOUR('',#285989); +#303174 = CURVE_STYLE('',#303175,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303175 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303176 = STYLED_ITEM('color',(#303177),#51590); +#303177 = PRESENTATION_STYLE_ASSIGNMENT((#303178,#303183)); +#303178 = SURFACE_STYLE_USAGE(.BOTH.,#303179); +#303179 = SURFACE_SIDE_STYLE('',(#303180)); +#303180 = SURFACE_STYLE_FILL_AREA(#303181); +#303181 = FILL_AREA_STYLE('',(#303182)); +#303182 = FILL_AREA_STYLE_COLOUR('',#285989); +#303183 = CURVE_STYLE('',#303184,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303184 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303185 = STYLED_ITEM('color',(#303186),#51607); +#303186 = PRESENTATION_STYLE_ASSIGNMENT((#303187,#303192)); +#303187 = SURFACE_STYLE_USAGE(.BOTH.,#303188); +#303188 = SURFACE_SIDE_STYLE('',(#303189)); +#303189 = SURFACE_STYLE_FILL_AREA(#303190); +#303190 = FILL_AREA_STYLE('',(#303191)); +#303191 = FILL_AREA_STYLE_COLOUR('',#285989); +#303192 = CURVE_STYLE('',#303193,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303193 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303194 = STYLED_ITEM('color',(#303195),#51624); +#303195 = PRESENTATION_STYLE_ASSIGNMENT((#303196,#303201)); +#303196 = SURFACE_STYLE_USAGE(.BOTH.,#303197); +#303197 = SURFACE_SIDE_STYLE('',(#303198)); +#303198 = SURFACE_STYLE_FILL_AREA(#303199); +#303199 = FILL_AREA_STYLE('',(#303200)); +#303200 = FILL_AREA_STYLE_COLOUR('',#285989); +#303201 = CURVE_STYLE('',#303202,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303202 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303203 = STYLED_ITEM('color',(#303204),#51636); +#303204 = PRESENTATION_STYLE_ASSIGNMENT((#303205,#303210)); +#303205 = SURFACE_STYLE_USAGE(.BOTH.,#303206); +#303206 = SURFACE_SIDE_STYLE('',(#303207)); +#303207 = SURFACE_STYLE_FILL_AREA(#303208); +#303208 = FILL_AREA_STYLE('',(#303209)); +#303209 = FILL_AREA_STYLE_COLOUR('',#285989); +#303210 = CURVE_STYLE('',#303211,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303211 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303212 = STYLED_ITEM('color',(#303213),#51653); +#303213 = PRESENTATION_STYLE_ASSIGNMENT((#303214,#303219)); +#303214 = SURFACE_STYLE_USAGE(.BOTH.,#303215); +#303215 = SURFACE_SIDE_STYLE('',(#303216)); +#303216 = SURFACE_STYLE_FILL_AREA(#303217); +#303217 = FILL_AREA_STYLE('',(#303218)); +#303218 = FILL_AREA_STYLE_COLOUR('',#285989); +#303219 = CURVE_STYLE('',#303220,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303220 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303221 = STYLED_ITEM('color',(#303222),#51670); +#303222 = PRESENTATION_STYLE_ASSIGNMENT((#303223,#303228)); +#303223 = SURFACE_STYLE_USAGE(.BOTH.,#303224); +#303224 = SURFACE_SIDE_STYLE('',(#303225)); +#303225 = SURFACE_STYLE_FILL_AREA(#303226); +#303226 = FILL_AREA_STYLE('',(#303227)); +#303227 = FILL_AREA_STYLE_COLOUR('',#285989); +#303228 = CURVE_STYLE('',#303229,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303229 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303230 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #303231,#303238,#303245,#303252,#303259,#303266,#303273,#303280, + #303287,#303294,#303301,#303308,#303315,#303322,#303329,#303336, + #303343,#303350,#303357,#303364,#303371,#303378,#303385,#303392, + #303399,#303406,#303413,#303420,#303427,#303434,#303441,#303448, + #303455,#303462,#303469,#303476,#303483,#303490,#303497,#303504, + #303511),#53789); +#303231 = STYLED_ITEM('color',(#303232),#52583); +#303232 = PRESENTATION_STYLE_ASSIGNMENT((#303233)); +#303233 = SURFACE_STYLE_USAGE(.BOTH.,#303234); +#303234 = SURFACE_SIDE_STYLE('',(#303235)); +#303235 = SURFACE_STYLE_FILL_AREA(#303236); +#303236 = FILL_AREA_STYLE('',(#303237)); +#303237 = FILL_AREA_STYLE_COLOUR('',#270441); +#303238 = STYLED_ITEM('color',(#303239),#52623); +#303239 = PRESENTATION_STYLE_ASSIGNMENT((#303240)); +#303240 = SURFACE_STYLE_USAGE(.BOTH.,#303241); +#303241 = SURFACE_SIDE_STYLE('',(#303242)); +#303242 = SURFACE_STYLE_FILL_AREA(#303243); +#303243 = FILL_AREA_STYLE('',(#303244)); +#303244 = FILL_AREA_STYLE_COLOUR('',#270441); +#303245 = STYLED_ITEM('color',(#303246),#52706); +#303246 = PRESENTATION_STYLE_ASSIGNMENT((#303247)); +#303247 = SURFACE_STYLE_USAGE(.BOTH.,#303248); +#303248 = SURFACE_SIDE_STYLE('',(#303249)); +#303249 = SURFACE_STYLE_FILL_AREA(#303250); +#303250 = FILL_AREA_STYLE('',(#303251)); +#303251 = FILL_AREA_STYLE_COLOUR('',#270441); +#303252 = STYLED_ITEM('color',(#303253),#52731); +#303253 = PRESENTATION_STYLE_ASSIGNMENT((#303254)); +#303254 = SURFACE_STYLE_USAGE(.BOTH.,#303255); +#303255 = SURFACE_SIDE_STYLE('',(#303256)); +#303256 = SURFACE_STYLE_FILL_AREA(#303257); +#303257 = FILL_AREA_STYLE('',(#303258)); +#303258 = FILL_AREA_STYLE_COLOUR('',#270441); +#303259 = STYLED_ITEM('color',(#303260),#52806); +#303260 = PRESENTATION_STYLE_ASSIGNMENT((#303261)); +#303261 = SURFACE_STYLE_USAGE(.BOTH.,#303262); +#303262 = SURFACE_SIDE_STYLE('',(#303263)); +#303263 = SURFACE_STYLE_FILL_AREA(#303264); +#303264 = FILL_AREA_STYLE('',(#303265)); +#303265 = FILL_AREA_STYLE_COLOUR('',#270441); +#303266 = STYLED_ITEM('color',(#303267),#52823); +#303267 = PRESENTATION_STYLE_ASSIGNMENT((#303268)); +#303268 = SURFACE_STYLE_USAGE(.BOTH.,#303269); +#303269 = SURFACE_SIDE_STYLE('',(#303270)); +#303270 = SURFACE_STYLE_FILL_AREA(#303271); +#303271 = FILL_AREA_STYLE('',(#303272)); +#303272 = FILL_AREA_STYLE_COLOUR('',#270441); +#303273 = STYLED_ITEM('color',(#303274),#52840); +#303274 = PRESENTATION_STYLE_ASSIGNMENT((#303275)); +#303275 = SURFACE_STYLE_USAGE(.BOTH.,#303276); +#303276 = SURFACE_SIDE_STYLE('',(#303277)); +#303277 = SURFACE_STYLE_FILL_AREA(#303278); +#303278 = FILL_AREA_STYLE('',(#303279)); +#303279 = FILL_AREA_STYLE_COLOUR('',#270441); +#303280 = STYLED_ITEM('color',(#303281),#52857); +#303281 = PRESENTATION_STYLE_ASSIGNMENT((#303282)); +#303282 = SURFACE_STYLE_USAGE(.BOTH.,#303283); +#303283 = SURFACE_SIDE_STYLE('',(#303284)); +#303284 = SURFACE_STYLE_FILL_AREA(#303285); +#303285 = FILL_AREA_STYLE('',(#303286)); +#303286 = FILL_AREA_STYLE_COLOUR('',#270441); +#303287 = STYLED_ITEM('color',(#303288),#52874); +#303288 = PRESENTATION_STYLE_ASSIGNMENT((#303289)); +#303289 = SURFACE_STYLE_USAGE(.BOTH.,#303290); +#303290 = SURFACE_SIDE_STYLE('',(#303291)); +#303291 = SURFACE_STYLE_FILL_AREA(#303292); +#303292 = FILL_AREA_STYLE('',(#303293)); +#303293 = FILL_AREA_STYLE_COLOUR('',#270441); +#303294 = STYLED_ITEM('color',(#303295),#52891); +#303295 = PRESENTATION_STYLE_ASSIGNMENT((#303296)); +#303296 = SURFACE_STYLE_USAGE(.BOTH.,#303297); +#303297 = SURFACE_SIDE_STYLE('',(#303298)); +#303298 = SURFACE_STYLE_FILL_AREA(#303299); +#303299 = FILL_AREA_STYLE('',(#303300)); +#303300 = FILL_AREA_STYLE_COLOUR('',#270441); +#303301 = STYLED_ITEM('color',(#303302),#52907); +#303302 = PRESENTATION_STYLE_ASSIGNMENT((#303303)); +#303303 = SURFACE_STYLE_USAGE(.BOTH.,#303304); +#303304 = SURFACE_SIDE_STYLE('',(#303305)); +#303305 = SURFACE_STYLE_FILL_AREA(#303306); +#303306 = FILL_AREA_STYLE('',(#303307)); +#303307 = FILL_AREA_STYLE_COLOUR('',#270350); +#303308 = STYLED_ITEM('color',(#303309),#52954); +#303309 = PRESENTATION_STYLE_ASSIGNMENT((#303310)); +#303310 = SURFACE_STYLE_USAGE(.BOTH.,#303311); +#303311 = SURFACE_SIDE_STYLE('',(#303312)); +#303312 = SURFACE_STYLE_FILL_AREA(#303313); +#303313 = FILL_AREA_STYLE('',(#303314)); +#303314 = FILL_AREA_STYLE_COLOUR('',#270350); +#303315 = STYLED_ITEM('color',(#303316),#52989); +#303316 = PRESENTATION_STYLE_ASSIGNMENT((#303317)); +#303317 = SURFACE_STYLE_USAGE(.BOTH.,#303318); +#303318 = SURFACE_SIDE_STYLE('',(#303319)); +#303319 = SURFACE_STYLE_FILL_AREA(#303320); +#303320 = FILL_AREA_STYLE('',(#303321)); +#303321 = FILL_AREA_STYLE_COLOUR('',#270350); +#303322 = STYLED_ITEM('color',(#303323),#53028); +#303323 = PRESENTATION_STYLE_ASSIGNMENT((#303324)); +#303324 = SURFACE_STYLE_USAGE(.BOTH.,#303325); +#303325 = SURFACE_SIDE_STYLE('',(#303326)); +#303326 = SURFACE_STYLE_FILL_AREA(#303327); +#303327 = FILL_AREA_STYLE('',(#303328)); +#303328 = FILL_AREA_STYLE_COLOUR('',#270350); +#303329 = STYLED_ITEM('color',(#303330),#53057); +#303330 = PRESENTATION_STYLE_ASSIGNMENT((#303331)); +#303331 = SURFACE_STYLE_USAGE(.BOTH.,#303332); +#303332 = SURFACE_SIDE_STYLE('',(#303333)); +#303333 = SURFACE_STYLE_FILL_AREA(#303334); +#303334 = FILL_AREA_STYLE('',(#303335)); +#303335 = FILL_AREA_STYLE_COLOUR('',#270350); +#303336 = STYLED_ITEM('color',(#303337),#53096); +#303337 = PRESENTATION_STYLE_ASSIGNMENT((#303338)); +#303338 = SURFACE_STYLE_USAGE(.BOTH.,#303339); +#303339 = SURFACE_SIDE_STYLE('',(#303340)); +#303340 = SURFACE_STYLE_FILL_AREA(#303341); +#303341 = FILL_AREA_STYLE('',(#303342)); +#303342 = FILL_AREA_STYLE_COLOUR('',#270350); +#303343 = STYLED_ITEM('color',(#303344),#53125); +#303344 = PRESENTATION_STYLE_ASSIGNMENT((#303345)); +#303345 = SURFACE_STYLE_USAGE(.BOTH.,#303346); +#303346 = SURFACE_SIDE_STYLE('',(#303347)); +#303347 = SURFACE_STYLE_FILL_AREA(#303348); +#303348 = FILL_AREA_STYLE('',(#303349)); +#303349 = FILL_AREA_STYLE_COLOUR('',#270350); +#303350 = STYLED_ITEM('color',(#303351),#53179); +#303351 = PRESENTATION_STYLE_ASSIGNMENT((#303352)); +#303352 = SURFACE_STYLE_USAGE(.BOTH.,#303353); +#303353 = SURFACE_SIDE_STYLE('',(#303354)); +#303354 = SURFACE_STYLE_FILL_AREA(#303355); +#303355 = FILL_AREA_STYLE('',(#303356)); +#303356 = FILL_AREA_STYLE_COLOUR('',#270350); +#303357 = STYLED_ITEM('color',(#303358),#53222); +#303358 = PRESENTATION_STYLE_ASSIGNMENT((#303359)); +#303359 = SURFACE_STYLE_USAGE(.BOTH.,#303360); +#303360 = SURFACE_SIDE_STYLE('',(#303361)); +#303361 = SURFACE_STYLE_FILL_AREA(#303362); +#303362 = FILL_AREA_STYLE('',(#303363)); +#303363 = FILL_AREA_STYLE_COLOUR('',#270350); +#303364 = STYLED_ITEM('color',(#303365),#53245); +#303365 = PRESENTATION_STYLE_ASSIGNMENT((#303366)); +#303366 = SURFACE_STYLE_USAGE(.BOTH.,#303367); +#303367 = SURFACE_SIDE_STYLE('',(#303368)); +#303368 = SURFACE_STYLE_FILL_AREA(#303369); +#303369 = FILL_AREA_STYLE('',(#303370)); +#303370 = FILL_AREA_STYLE_COLOUR('',#270350); +#303371 = STYLED_ITEM('color',(#303372),#53268); +#303372 = PRESENTATION_STYLE_ASSIGNMENT((#303373)); +#303373 = SURFACE_STYLE_USAGE(.BOTH.,#303374); +#303374 = SURFACE_SIDE_STYLE('',(#303375)); +#303375 = SURFACE_STYLE_FILL_AREA(#303376); +#303376 = FILL_AREA_STYLE('',(#303377)); +#303377 = FILL_AREA_STYLE_COLOUR('',#270350); +#303378 = STYLED_ITEM('color',(#303379),#53291); +#303379 = PRESENTATION_STYLE_ASSIGNMENT((#303380)); +#303380 = SURFACE_STYLE_USAGE(.BOTH.,#303381); +#303381 = SURFACE_SIDE_STYLE('',(#303382)); +#303382 = SURFACE_STYLE_FILL_AREA(#303383); +#303383 = FILL_AREA_STYLE('',(#303384)); +#303384 = FILL_AREA_STYLE_COLOUR('',#270350); +#303385 = STYLED_ITEM('color',(#303386),#53342); +#303386 = PRESENTATION_STYLE_ASSIGNMENT((#303387)); +#303387 = SURFACE_STYLE_USAGE(.BOTH.,#303388); +#303388 = SURFACE_SIDE_STYLE('',(#303389)); +#303389 = SURFACE_STYLE_FILL_AREA(#303390); +#303390 = FILL_AREA_STYLE('',(#303391)); +#303391 = FILL_AREA_STYLE_COLOUR('',#270350); +#303392 = STYLED_ITEM('color',(#303393),#53365); +#303393 = PRESENTATION_STYLE_ASSIGNMENT((#303394)); +#303394 = SURFACE_STYLE_USAGE(.BOTH.,#303395); +#303395 = SURFACE_SIDE_STYLE('',(#303396)); +#303396 = SURFACE_STYLE_FILL_AREA(#303397); +#303397 = FILL_AREA_STYLE('',(#303398)); +#303398 = FILL_AREA_STYLE_COLOUR('',#270350); +#303399 = STYLED_ITEM('color',(#303400),#53382); +#303400 = PRESENTATION_STYLE_ASSIGNMENT((#303401)); +#303401 = SURFACE_STYLE_USAGE(.BOTH.,#303402); +#303402 = SURFACE_SIDE_STYLE('',(#303403)); +#303403 = SURFACE_STYLE_FILL_AREA(#303404); +#303404 = FILL_AREA_STYLE('',(#303405)); +#303405 = FILL_AREA_STYLE_COLOUR('',#270441); +#303406 = STYLED_ITEM('color',(#303407),#53456); +#303407 = PRESENTATION_STYLE_ASSIGNMENT((#303408)); +#303408 = SURFACE_STYLE_USAGE(.BOTH.,#303409); +#303409 = SURFACE_SIDE_STYLE('',(#303410)); +#303410 = SURFACE_STYLE_FILL_AREA(#303411); +#303411 = FILL_AREA_STYLE('',(#303412)); +#303412 = FILL_AREA_STYLE_COLOUR('',#270441); +#303413 = STYLED_ITEM('color',(#303414),#53480); +#303414 = PRESENTATION_STYLE_ASSIGNMENT((#303415)); +#303415 = SURFACE_STYLE_USAGE(.BOTH.,#303416); +#303416 = SURFACE_SIDE_STYLE('',(#303417)); +#303417 = SURFACE_STYLE_FILL_AREA(#303418); +#303418 = FILL_AREA_STYLE('',(#303419)); +#303419 = FILL_AREA_STYLE_COLOUR('',#270441); +#303420 = STYLED_ITEM('color',(#303421),#53547); +#303421 = PRESENTATION_STYLE_ASSIGNMENT((#303422)); +#303422 = SURFACE_STYLE_USAGE(.BOTH.,#303423); +#303423 = SURFACE_SIDE_STYLE('',(#303424)); +#303424 = SURFACE_STYLE_FILL_AREA(#303425); +#303425 = FILL_AREA_STYLE('',(#303426)); +#303426 = FILL_AREA_STYLE_COLOUR('',#270350); +#303427 = STYLED_ITEM('color',(#303428),#53559); +#303428 = PRESENTATION_STYLE_ASSIGNMENT((#303429)); +#303429 = SURFACE_STYLE_USAGE(.BOTH.,#303430); +#303430 = SURFACE_SIDE_STYLE('',(#303431)); +#303431 = SURFACE_STYLE_FILL_AREA(#303432); +#303432 = FILL_AREA_STYLE('',(#303433)); +#303433 = FILL_AREA_STYLE_COLOUR('',#270350); +#303434 = STYLED_ITEM('color',(#303435),#53571); +#303435 = PRESENTATION_STYLE_ASSIGNMENT((#303436)); +#303436 = SURFACE_STYLE_USAGE(.BOTH.,#303437); +#303437 = SURFACE_SIDE_STYLE('',(#303438)); +#303438 = SURFACE_STYLE_FILL_AREA(#303439); +#303439 = FILL_AREA_STYLE('',(#303440)); +#303440 = FILL_AREA_STYLE_COLOUR('',#270441); +#303441 = STYLED_ITEM('color',(#303442),#53588); +#303442 = PRESENTATION_STYLE_ASSIGNMENT((#303443)); +#303443 = SURFACE_STYLE_USAGE(.BOTH.,#303444); +#303444 = SURFACE_SIDE_STYLE('',(#303445)); +#303445 = SURFACE_STYLE_FILL_AREA(#303446); +#303446 = FILL_AREA_STYLE('',(#303447)); +#303447 = FILL_AREA_STYLE_COLOUR('',#271711); +#303448 = STYLED_ITEM('color',(#303449),#53617); +#303449 = PRESENTATION_STYLE_ASSIGNMENT((#303450)); +#303450 = SURFACE_STYLE_USAGE(.BOTH.,#303451); +#303451 = SURFACE_SIDE_STYLE('',(#303452)); +#303452 = SURFACE_STYLE_FILL_AREA(#303453); +#303453 = FILL_AREA_STYLE('',(#303454)); +#303454 = FILL_AREA_STYLE_COLOUR('',#271711); +#303455 = STYLED_ITEM('color',(#303456),#53640); +#303456 = PRESENTATION_STYLE_ASSIGNMENT((#303457)); +#303457 = SURFACE_STYLE_USAGE(.BOTH.,#303458); +#303458 = SURFACE_SIDE_STYLE('',(#303459)); +#303459 = SURFACE_STYLE_FILL_AREA(#303460); +#303460 = FILL_AREA_STYLE('',(#303461)); +#303461 = FILL_AREA_STYLE_COLOUR('',#271711); +#303462 = STYLED_ITEM('color',(#303463),#53663); +#303463 = PRESENTATION_STYLE_ASSIGNMENT((#303464)); +#303464 = SURFACE_STYLE_USAGE(.BOTH.,#303465); +#303465 = SURFACE_SIDE_STYLE('',(#303466)); +#303466 = SURFACE_STYLE_FILL_AREA(#303467); +#303467 = FILL_AREA_STYLE('',(#303468)); +#303468 = FILL_AREA_STYLE_COLOUR('',#271711); +#303469 = STYLED_ITEM('color',(#303470),#53680); +#303470 = PRESENTATION_STYLE_ASSIGNMENT((#303471)); +#303471 = SURFACE_STYLE_USAGE(.BOTH.,#303472); +#303472 = SURFACE_SIDE_STYLE('',(#303473)); +#303473 = SURFACE_STYLE_FILL_AREA(#303474); +#303474 = FILL_AREA_STYLE('',(#303475)); +#303475 = FILL_AREA_STYLE_COLOUR('',#270441); +#303476 = STYLED_ITEM('color',(#303477),#53702); +#303477 = PRESENTATION_STYLE_ASSIGNMENT((#303478)); +#303478 = SURFACE_STYLE_USAGE(.BOTH.,#303479); +#303479 = SURFACE_SIDE_STYLE('',(#303480)); +#303480 = SURFACE_STYLE_FILL_AREA(#303481); +#303481 = FILL_AREA_STYLE('',(#303482)); +#303482 = FILL_AREA_STYLE_COLOUR('',#270441); +#303483 = STYLED_ITEM('color',(#303484),#53714); +#303484 = PRESENTATION_STYLE_ASSIGNMENT((#303485)); +#303485 = SURFACE_STYLE_USAGE(.BOTH.,#303486); +#303486 = SURFACE_SIDE_STYLE('',(#303487)); +#303487 = SURFACE_STYLE_FILL_AREA(#303488); +#303488 = FILL_AREA_STYLE('',(#303489)); +#303489 = FILL_AREA_STYLE_COLOUR('',#270441); +#303490 = STYLED_ITEM('color',(#303491),#53731); +#303491 = PRESENTATION_STYLE_ASSIGNMENT((#303492)); +#303492 = SURFACE_STYLE_USAGE(.BOTH.,#303493); +#303493 = SURFACE_SIDE_STYLE('',(#303494)); +#303494 = SURFACE_STYLE_FILL_AREA(#303495); +#303495 = FILL_AREA_STYLE('',(#303496)); +#303496 = FILL_AREA_STYLE_COLOUR('',#270441); +#303497 = STYLED_ITEM('color',(#303498),#53748); +#303498 = PRESENTATION_STYLE_ASSIGNMENT((#303499)); +#303499 = SURFACE_STYLE_USAGE(.BOTH.,#303500); +#303500 = SURFACE_SIDE_STYLE('',(#303501)); +#303501 = SURFACE_STYLE_FILL_AREA(#303502); +#303502 = FILL_AREA_STYLE('',(#303503)); +#303503 = FILL_AREA_STYLE_COLOUR('',#270441); +#303504 = STYLED_ITEM('color',(#303505),#53765); +#303505 = PRESENTATION_STYLE_ASSIGNMENT((#303506)); +#303506 = SURFACE_STYLE_USAGE(.BOTH.,#303507); +#303507 = SURFACE_SIDE_STYLE('',(#303508)); +#303508 = SURFACE_STYLE_FILL_AREA(#303509); +#303509 = FILL_AREA_STYLE('',(#303510)); +#303510 = FILL_AREA_STYLE_COLOUR('',#270441); +#303511 = STYLED_ITEM('color',(#303512),#53777); +#303512 = PRESENTATION_STYLE_ASSIGNMENT((#303513)); +#303513 = SURFACE_STYLE_USAGE(.BOTH.,#303514); +#303514 = SURFACE_SIDE_STYLE('',(#303515)); +#303515 = SURFACE_STYLE_FILL_AREA(#303516); +#303516 = FILL_AREA_STYLE('',(#303517)); +#303517 = FILL_AREA_STYLE_COLOUR('',#271711); +#303518 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #303519,#303526,#303533,#303540,#303547,#303554,#303561,#303568, + #303575,#303582,#303589,#303596,#303603,#303610,#303617,#303624, + #303631,#303638,#303645,#303652,#303659,#303666,#303673,#303680, + #303687,#303694,#303701,#303708),#15625); +#303519 = STYLED_ITEM('color',(#303520),#14773); +#303520 = PRESENTATION_STYLE_ASSIGNMENT((#303521)); +#303521 = SURFACE_STYLE_USAGE(.BOTH.,#303522); +#303522 = SURFACE_SIDE_STYLE('',(#303523)); +#303523 = SURFACE_STYLE_FILL_AREA(#303524); +#303524 = FILL_AREA_STYLE('',(#303525)); +#303525 = FILL_AREA_STYLE_COLOUR('',#270441); +#303526 = STYLED_ITEM('color',(#303527),#14849); +#303527 = PRESENTATION_STYLE_ASSIGNMENT((#303528)); +#303528 = SURFACE_STYLE_USAGE(.BOTH.,#303529); +#303529 = SURFACE_SIDE_STYLE('',(#303530)); +#303530 = SURFACE_STYLE_FILL_AREA(#303531); +#303531 = FILL_AREA_STYLE('',(#303532)); +#303532 = FILL_AREA_STYLE_COLOUR('',#270441); +#303533 = STYLED_ITEM('color',(#303534),#14880); +#303534 = PRESENTATION_STYLE_ASSIGNMENT((#303535)); +#303535 = SURFACE_STYLE_USAGE(.BOTH.,#303536); +#303536 = SURFACE_SIDE_STYLE('',(#303537)); +#303537 = SURFACE_STYLE_FILL_AREA(#303538); +#303538 = FILL_AREA_STYLE('',(#303539)); +#303539 = FILL_AREA_STYLE_COLOUR('',#270441); +#303540 = STYLED_ITEM('color',(#303541),#14905); +#303541 = PRESENTATION_STYLE_ASSIGNMENT((#303542)); +#303542 = SURFACE_STYLE_USAGE(.BOTH.,#303543); +#303543 = SURFACE_SIDE_STYLE('',(#303544)); +#303544 = SURFACE_STYLE_FILL_AREA(#303545); +#303545 = FILL_AREA_STYLE('',(#303546)); +#303546 = FILL_AREA_STYLE_COLOUR('',#270441); +#303547 = STYLED_ITEM('color',(#303548),#14930); +#303548 = PRESENTATION_STYLE_ASSIGNMENT((#303549)); +#303549 = SURFACE_STYLE_USAGE(.BOTH.,#303550); +#303550 = SURFACE_SIDE_STYLE('',(#303551)); +#303551 = SURFACE_STYLE_FILL_AREA(#303552); +#303552 = FILL_AREA_STYLE('',(#303553)); +#303553 = FILL_AREA_STYLE_COLOUR('',#270441); +#303554 = STYLED_ITEM('color',(#303555),#14954); +#303555 = PRESENTATION_STYLE_ASSIGNMENT((#303556)); +#303556 = SURFACE_STYLE_USAGE(.BOTH.,#303557); +#303557 = SURFACE_SIDE_STYLE('',(#303558)); +#303558 = SURFACE_STYLE_FILL_AREA(#303559); +#303559 = FILL_AREA_STYLE('',(#303560)); +#303560 = FILL_AREA_STYLE_COLOUR('',#270441); +#303561 = STYLED_ITEM('color',(#303562),#14978); +#303562 = PRESENTATION_STYLE_ASSIGNMENT((#303563)); +#303563 = SURFACE_STYLE_USAGE(.BOTH.,#303564); +#303564 = SURFACE_SIDE_STYLE('',(#303565)); +#303565 = SURFACE_STYLE_FILL_AREA(#303566); +#303566 = FILL_AREA_STYLE('',(#303567)); +#303567 = FILL_AREA_STYLE_COLOUR('',#270441); +#303568 = STYLED_ITEM('color',(#303569),#15003); +#303569 = PRESENTATION_STYLE_ASSIGNMENT((#303570)); +#303570 = SURFACE_STYLE_USAGE(.BOTH.,#303571); +#303571 = SURFACE_SIDE_STYLE('',(#303572)); +#303572 = SURFACE_STYLE_FILL_AREA(#303573); +#303573 = FILL_AREA_STYLE('',(#303574)); +#303574 = FILL_AREA_STYLE_COLOUR('',#270441); +#303575 = STYLED_ITEM('color',(#303576),#15028); +#303576 = PRESENTATION_STYLE_ASSIGNMENT((#303577)); +#303577 = SURFACE_STYLE_USAGE(.BOTH.,#303578); +#303578 = SURFACE_SIDE_STYLE('',(#303579)); +#303579 = SURFACE_STYLE_FILL_AREA(#303580); +#303580 = FILL_AREA_STYLE('',(#303581)); +#303581 = FILL_AREA_STYLE_COLOUR('',#270441); +#303582 = STYLED_ITEM('color',(#303583),#15045); +#303583 = PRESENTATION_STYLE_ASSIGNMENT((#303584)); +#303584 = SURFACE_STYLE_USAGE(.BOTH.,#303585); +#303585 = SURFACE_SIDE_STYLE('',(#303586)); +#303586 = SURFACE_STYLE_FILL_AREA(#303587); +#303587 = FILL_AREA_STYLE('',(#303588)); +#303588 = FILL_AREA_STYLE_COLOUR('',#270441); +#303589 = STYLED_ITEM('color',(#303590),#15131); +#303590 = PRESENTATION_STYLE_ASSIGNMENT((#303591)); +#303591 = SURFACE_STYLE_USAGE(.BOTH.,#303592); +#303592 = SURFACE_SIDE_STYLE('',(#303593)); +#303593 = SURFACE_STYLE_FILL_AREA(#303594); +#303594 = FILL_AREA_STYLE('',(#303595)); +#303595 = FILL_AREA_STYLE_COLOUR('',#296077); +#303596 = STYLED_ITEM('color',(#303597),#15163); +#303597 = PRESENTATION_STYLE_ASSIGNMENT((#303598)); +#303598 = SURFACE_STYLE_USAGE(.BOTH.,#303599); +#303599 = SURFACE_SIDE_STYLE('',(#303600)); +#303600 = SURFACE_STYLE_FILL_AREA(#303601); +#303601 = FILL_AREA_STYLE('',(#303602)); +#303602 = FILL_AREA_STYLE_COLOUR('',#296077); +#303603 = STYLED_ITEM('color',(#303604),#15187); +#303604 = PRESENTATION_STYLE_ASSIGNMENT((#303605)); +#303605 = SURFACE_STYLE_USAGE(.BOTH.,#303606); +#303606 = SURFACE_SIDE_STYLE('',(#303607)); +#303607 = SURFACE_STYLE_FILL_AREA(#303608); +#303608 = FILL_AREA_STYLE('',(#303609)); +#303609 = FILL_AREA_STYLE_COLOUR('',#296077); +#303610 = STYLED_ITEM('color',(#303611),#15212); +#303611 = PRESENTATION_STYLE_ASSIGNMENT((#303612)); +#303612 = SURFACE_STYLE_USAGE(.BOTH.,#303613); +#303613 = SURFACE_SIDE_STYLE('',(#303614)); +#303614 = SURFACE_STYLE_FILL_AREA(#303615); +#303615 = FILL_AREA_STYLE('',(#303616)); +#303616 = FILL_AREA_STYLE_COLOUR('',#296077); +#303617 = STYLED_ITEM('color',(#303618),#15236); +#303618 = PRESENTATION_STYLE_ASSIGNMENT((#303619)); +#303619 = SURFACE_STYLE_USAGE(.BOTH.,#303620); +#303620 = SURFACE_SIDE_STYLE('',(#303621)); +#303621 = SURFACE_STYLE_FILL_AREA(#303622); +#303622 = FILL_AREA_STYLE('',(#303623)); +#303623 = FILL_AREA_STYLE_COLOUR('',#296077); +#303624 = STYLED_ITEM('color',(#303625),#15261); +#303625 = PRESENTATION_STYLE_ASSIGNMENT((#303626)); +#303626 = SURFACE_STYLE_USAGE(.BOTH.,#303627); +#303627 = SURFACE_SIDE_STYLE('',(#303628)); +#303628 = SURFACE_STYLE_FILL_AREA(#303629); +#303629 = FILL_AREA_STYLE('',(#303630)); +#303630 = FILL_AREA_STYLE_COLOUR('',#296077); +#303631 = STYLED_ITEM('color',(#303632),#15285); +#303632 = PRESENTATION_STYLE_ASSIGNMENT((#303633)); +#303633 = SURFACE_STYLE_USAGE(.BOTH.,#303634); +#303634 = SURFACE_SIDE_STYLE('',(#303635)); +#303635 = SURFACE_STYLE_FILL_AREA(#303636); +#303636 = FILL_AREA_STYLE('',(#303637)); +#303637 = FILL_AREA_STYLE_COLOUR('',#296077); +#303638 = STYLED_ITEM('color',(#303639),#15310); +#303639 = PRESENTATION_STYLE_ASSIGNMENT((#303640)); +#303640 = SURFACE_STYLE_USAGE(.BOTH.,#303641); +#303641 = SURFACE_SIDE_STYLE('',(#303642)); +#303642 = SURFACE_STYLE_FILL_AREA(#303643); +#303643 = FILL_AREA_STYLE('',(#303644)); +#303644 = FILL_AREA_STYLE_COLOUR('',#296077); +#303645 = STYLED_ITEM('color',(#303646),#15327); +#303646 = PRESENTATION_STYLE_ASSIGNMENT((#303647)); +#303647 = SURFACE_STYLE_USAGE(.BOTH.,#303648); +#303648 = SURFACE_SIDE_STYLE('',(#303649)); +#303649 = SURFACE_STYLE_FILL_AREA(#303650); +#303650 = FILL_AREA_STYLE('',(#303651)); +#303651 = FILL_AREA_STYLE_COLOUR('',#270441); +#303652 = STYLED_ITEM('color',(#303653),#15413); +#303653 = PRESENTATION_STYLE_ASSIGNMENT((#303654)); +#303654 = SURFACE_STYLE_USAGE(.BOTH.,#303655); +#303655 = SURFACE_SIDE_STYLE('',(#303656)); +#303656 = SURFACE_STYLE_FILL_AREA(#303657); +#303657 = FILL_AREA_STYLE('',(#303658)); +#303658 = FILL_AREA_STYLE_COLOUR('',#270441); +#303659 = STYLED_ITEM('color',(#303660),#15444); +#303660 = PRESENTATION_STYLE_ASSIGNMENT((#303661)); +#303661 = SURFACE_STYLE_USAGE(.BOTH.,#303662); +#303662 = SURFACE_SIDE_STYLE('',(#303663)); +#303663 = SURFACE_STYLE_FILL_AREA(#303664); +#303664 = FILL_AREA_STYLE('',(#303665)); +#303665 = FILL_AREA_STYLE_COLOUR('',#270441); +#303666 = STYLED_ITEM('color',(#303667),#15469); +#303667 = PRESENTATION_STYLE_ASSIGNMENT((#303668)); +#303668 = SURFACE_STYLE_USAGE(.BOTH.,#303669); +#303669 = SURFACE_SIDE_STYLE('',(#303670)); +#303670 = SURFACE_STYLE_FILL_AREA(#303671); +#303671 = FILL_AREA_STYLE('',(#303672)); +#303672 = FILL_AREA_STYLE_COLOUR('',#270441); +#303673 = STYLED_ITEM('color',(#303674),#15494); +#303674 = PRESENTATION_STYLE_ASSIGNMENT((#303675)); +#303675 = SURFACE_STYLE_USAGE(.BOTH.,#303676); +#303676 = SURFACE_SIDE_STYLE('',(#303677)); +#303677 = SURFACE_STYLE_FILL_AREA(#303678); +#303678 = FILL_AREA_STYLE('',(#303679)); +#303679 = FILL_AREA_STYLE_COLOUR('',#270441); +#303680 = STYLED_ITEM('color',(#303681),#15518); +#303681 = PRESENTATION_STYLE_ASSIGNMENT((#303682)); +#303682 = SURFACE_STYLE_USAGE(.BOTH.,#303683); +#303683 = SURFACE_SIDE_STYLE('',(#303684)); +#303684 = SURFACE_STYLE_FILL_AREA(#303685); +#303685 = FILL_AREA_STYLE('',(#303686)); +#303686 = FILL_AREA_STYLE_COLOUR('',#270441); +#303687 = STYLED_ITEM('color',(#303688),#15542); +#303688 = PRESENTATION_STYLE_ASSIGNMENT((#303689)); +#303689 = SURFACE_STYLE_USAGE(.BOTH.,#303690); +#303690 = SURFACE_SIDE_STYLE('',(#303691)); +#303691 = SURFACE_STYLE_FILL_AREA(#303692); +#303692 = FILL_AREA_STYLE('',(#303693)); +#303693 = FILL_AREA_STYLE_COLOUR('',#270441); +#303694 = STYLED_ITEM('color',(#303695),#15567); +#303695 = PRESENTATION_STYLE_ASSIGNMENT((#303696)); +#303696 = SURFACE_STYLE_USAGE(.BOTH.,#303697); +#303697 = SURFACE_SIDE_STYLE('',(#303698)); +#303698 = SURFACE_STYLE_FILL_AREA(#303699); +#303699 = FILL_AREA_STYLE('',(#303700)); +#303700 = FILL_AREA_STYLE_COLOUR('',#270441); +#303701 = STYLED_ITEM('color',(#303702),#15592); +#303702 = PRESENTATION_STYLE_ASSIGNMENT((#303703)); +#303703 = SURFACE_STYLE_USAGE(.BOTH.,#303704); +#303704 = SURFACE_SIDE_STYLE('',(#303705)); +#303705 = SURFACE_STYLE_FILL_AREA(#303706); +#303706 = FILL_AREA_STYLE('',(#303707)); +#303707 = FILL_AREA_STYLE_COLOUR('',#270441); +#303708 = STYLED_ITEM('color',(#303709),#15609); +#303709 = PRESENTATION_STYLE_ASSIGNMENT((#303710)); +#303710 = SURFACE_STYLE_USAGE(.BOTH.,#303711); +#303711 = SURFACE_SIDE_STYLE('',(#303712)); +#303712 = SURFACE_STYLE_FILL_AREA(#303713); +#303713 = FILL_AREA_STYLE('',(#303714)); +#303714 = FILL_AREA_STYLE_COLOUR('',#270441); +#303715 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #303716,#303725,#303734,#303743,#303752,#303761,#303770,#303779, + #303788,#303797,#303806,#303815,#303824,#303833,#303842,#303851, + #303860,#303869,#303878,#303887,#303896,#303905,#303914,#303923, + #303932,#303941,#303950,#303959,#303968,#303977,#303986,#303995, + #304004,#304013,#304022,#304031,#304040,#304049,#304058,#304067, + #304076,#304085,#304094,#304103,#304112,#304121,#304130,#304139, + #304148,#304157,#304166,#304175,#304184,#304193,#304202,#304211, + #304220,#304229,#304238,#304247,#304256,#304265,#304274,#304283, + #304292,#304301,#304310,#304319,#304328,#304337,#304346,#304355, + #304364,#304373,#304382,#304391,#304400,#304409,#304418,#304427, + #304436,#304445,#304454,#304463,#304472,#304481,#304490,#304499, + #304508,#304517,#304526,#304535,#304544,#304553,#304562,#304571, + #304580,#304589,#304598,#304607,#304616,#304625,#304634,#304643, + #304652,#304661,#304670,#304679,#304688,#304697,#304706,#304715, + #304724,#304733,#304742,#304751,#304760,#304769,#304778,#304787, + #304796,#304805,#304814,#304823,#304832,#304841,#304850,#304859, + #304868,#304877,#304886,#304895,#304904,#304913,#304922,#304931, + #304940,#304949,#304958,#304967,#304976,#304985,#304994,#305003, + #305012,#305021,#305030,#305039,#305048,#305057,#305066,#305075, + #305084,#305093,#305102,#305111,#305120,#305129,#305138,#305147, + #305156,#305165,#305174,#305183,#305192,#305201,#305210,#305219, + #305228,#305237,#305246,#305255,#305264,#305273,#305282,#305291, + #305300,#305309,#305318,#305327,#305336,#305345,#305354,#305363, + #305372,#305381,#305390,#305399,#305408,#305417,#305426,#305435, + #305444,#305453,#305462,#305471,#305480,#305489,#305498,#305507, + #305516,#305525,#305534,#305543,#305552,#305561,#305570,#305579, + #305588,#305597,#305606,#305615,#305624,#305633,#305642,#305651, + #305660,#305669,#305678,#305687,#305696,#305705,#305714,#305723, + #305732,#305741,#305750,#305759,#305768,#305777,#305786,#305795, + #305804,#305813,#305822,#305831,#305840,#305849,#305858,#305867, + #305876,#305885,#305894,#305903,#305912,#305921,#305930,#305939, + #305948,#305957,#305966,#305975,#305984,#305993,#306002,#306011, + #306020,#306029,#306038,#306047,#306056,#306065,#306074,#306083, + #306092,#306101,#306110,#306119,#306128,#306137,#306146,#306155, + #306164,#306173,#306182,#306191,#306200,#306209,#306218,#306227, + #306236,#306245),#109967); +#303716 = STYLED_ITEM('color',(#303717),#103479); +#303717 = PRESENTATION_STYLE_ASSIGNMENT((#303718,#303723)); +#303718 = SURFACE_STYLE_USAGE(.BOTH.,#303719); +#303719 = SURFACE_SIDE_STYLE('',(#303720)); +#303720 = SURFACE_STYLE_FILL_AREA(#303721); +#303721 = FILL_AREA_STYLE('',(#303722)); +#303722 = FILL_AREA_STYLE_COLOUR('',#270350); +#303723 = CURVE_STYLE('',#303724,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303725 = STYLED_ITEM('color',(#303726),#103519); +#303726 = PRESENTATION_STYLE_ASSIGNMENT((#303727,#303732)); +#303727 = SURFACE_STYLE_USAGE(.BOTH.,#303728); +#303728 = SURFACE_SIDE_STYLE('',(#303729)); +#303729 = SURFACE_STYLE_FILL_AREA(#303730); +#303730 = FILL_AREA_STYLE('',(#303731)); +#303731 = FILL_AREA_STYLE_COLOUR('',#270350); +#303732 = CURVE_STYLE('',#303733,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303734 = STYLED_ITEM('color',(#303735),#103582); +#303735 = PRESENTATION_STYLE_ASSIGNMENT((#303736,#303741)); +#303736 = SURFACE_STYLE_USAGE(.BOTH.,#303737); +#303737 = SURFACE_SIDE_STYLE('',(#303738)); +#303738 = SURFACE_STYLE_FILL_AREA(#303739); +#303739 = FILL_AREA_STYLE('',(#303740)); +#303740 = FILL_AREA_STYLE_COLOUR('',#270350); +#303741 = CURVE_STYLE('',#303742,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303743 = STYLED_ITEM('color',(#303744),#103645); +#303744 = PRESENTATION_STYLE_ASSIGNMENT((#303745,#303750)); +#303745 = SURFACE_STYLE_USAGE(.BOTH.,#303746); +#303746 = SURFACE_SIDE_STYLE('',(#303747)); +#303747 = SURFACE_STYLE_FILL_AREA(#303748); +#303748 = FILL_AREA_STYLE('',(#303749)); +#303749 = FILL_AREA_STYLE_COLOUR('',#270350); +#303750 = CURVE_STYLE('',#303751,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303752 = STYLED_ITEM('color',(#303753),#103662); +#303753 = PRESENTATION_STYLE_ASSIGNMENT((#303754,#303759)); +#303754 = SURFACE_STYLE_USAGE(.BOTH.,#303755); +#303755 = SURFACE_SIDE_STYLE('',(#303756)); +#303756 = SURFACE_STYLE_FILL_AREA(#303757); +#303757 = FILL_AREA_STYLE('',(#303758)); +#303758 = FILL_AREA_STYLE_COLOUR('',#270350); +#303759 = CURVE_STYLE('',#303760,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303761 = STYLED_ITEM('color',(#303762),#103951); +#303762 = PRESENTATION_STYLE_ASSIGNMENT((#303763,#303768)); +#303763 = SURFACE_STYLE_USAGE(.BOTH.,#303764); +#303764 = SURFACE_SIDE_STYLE('',(#303765)); +#303765 = SURFACE_STYLE_FILL_AREA(#303766); +#303766 = FILL_AREA_STYLE('',(#303767)); +#303767 = FILL_AREA_STYLE_COLOUR('',#270350); +#303768 = CURVE_STYLE('',#303769,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303770 = STYLED_ITEM('color',(#303771),#103973); +#303771 = PRESENTATION_STYLE_ASSIGNMENT((#303772,#303777)); +#303772 = SURFACE_STYLE_USAGE(.BOTH.,#303773); +#303773 = SURFACE_SIDE_STYLE('',(#303774)); +#303774 = SURFACE_STYLE_FILL_AREA(#303775); +#303775 = FILL_AREA_STYLE('',(#303776)); +#303776 = FILL_AREA_STYLE_COLOUR('',#270350); +#303777 = CURVE_STYLE('',#303778,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303779 = STYLED_ITEM('color',(#303780),#103990); +#303780 = PRESENTATION_STYLE_ASSIGNMENT((#303781,#303786)); +#303781 = SURFACE_STYLE_USAGE(.BOTH.,#303782); +#303782 = SURFACE_SIDE_STYLE('',(#303783)); +#303783 = SURFACE_STYLE_FILL_AREA(#303784); +#303784 = FILL_AREA_STYLE('',(#303785)); +#303785 = FILL_AREA_STYLE_COLOUR('',#270350); +#303786 = CURVE_STYLE('',#303787,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303788 = OVER_RIDING_STYLED_ITEM('overriding color',(#303789),#104023, + #303779); +#303789 = PRESENTATION_STYLE_ASSIGNMENT((#303790,#303795)); +#303790 = SURFACE_STYLE_USAGE(.BOTH.,#303791); +#303791 = SURFACE_SIDE_STYLE('',(#303792)); +#303792 = SURFACE_STYLE_FILL_AREA(#303793); +#303793 = FILL_AREA_STYLE('',(#303794)); +#303794 = FILL_AREA_STYLE_COLOUR('',#285989); +#303795 = CURVE_STYLE('',#303796,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303797 = OVER_RIDING_STYLED_ITEM('overriding color',(#303798),#104055, + #303779); +#303798 = PRESENTATION_STYLE_ASSIGNMENT((#303799,#303804)); +#303799 = SURFACE_STYLE_USAGE(.BOTH.,#303800); +#303800 = SURFACE_SIDE_STYLE('',(#303801)); +#303801 = SURFACE_STYLE_FILL_AREA(#303802); +#303802 = FILL_AREA_STYLE('',(#303803)); +#303803 = FILL_AREA_STYLE_COLOUR('',#285989); +#303804 = CURVE_STYLE('',#303805,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303806 = OVER_RIDING_STYLED_ITEM('overriding color',(#303807),#104089, + #303779); +#303807 = PRESENTATION_STYLE_ASSIGNMENT((#303808,#303813)); +#303808 = SURFACE_STYLE_USAGE(.BOTH.,#303809); +#303809 = SURFACE_SIDE_STYLE('',(#303810)); +#303810 = SURFACE_STYLE_FILL_AREA(#303811); +#303811 = FILL_AREA_STYLE('',(#303812)); +#303812 = FILL_AREA_STYLE_COLOUR('',#285989); +#303813 = CURVE_STYLE('',#303814,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303815 = OVER_RIDING_STYLED_ITEM('overriding color',(#303816),#104121, + #303779); +#303816 = PRESENTATION_STYLE_ASSIGNMENT((#303817,#303822)); +#303817 = SURFACE_STYLE_USAGE(.BOTH.,#303818); +#303818 = SURFACE_SIDE_STYLE('',(#303819)); +#303819 = SURFACE_STYLE_FILL_AREA(#303820); +#303820 = FILL_AREA_STYLE('',(#303821)); +#303821 = FILL_AREA_STYLE_COLOUR('',#285989); +#303822 = CURVE_STYLE('',#303823,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303824 = OVER_RIDING_STYLED_ITEM('overriding color',(#303825),#104155, + #303779); +#303825 = PRESENTATION_STYLE_ASSIGNMENT((#303826,#303831)); +#303826 = SURFACE_STYLE_USAGE(.BOTH.,#303827); +#303827 = SURFACE_SIDE_STYLE('',(#303828)); +#303828 = SURFACE_STYLE_FILL_AREA(#303829); +#303829 = FILL_AREA_STYLE('',(#303830)); +#303830 = FILL_AREA_STYLE_COLOUR('',#285989); +#303831 = CURVE_STYLE('',#303832,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303833 = OVER_RIDING_STYLED_ITEM('overriding color',(#303834),#104187, + #303779); +#303834 = PRESENTATION_STYLE_ASSIGNMENT((#303835,#303840)); +#303835 = SURFACE_STYLE_USAGE(.BOTH.,#303836); +#303836 = SURFACE_SIDE_STYLE('',(#303837)); +#303837 = SURFACE_STYLE_FILL_AREA(#303838); +#303838 = FILL_AREA_STYLE('',(#303839)); +#303839 = FILL_AREA_STYLE_COLOUR('',#285989); +#303840 = CURVE_STYLE('',#303841,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303842 = OVER_RIDING_STYLED_ITEM('overriding color',(#303843),#104221, + #303779); +#303843 = PRESENTATION_STYLE_ASSIGNMENT((#303844,#303849)); +#303844 = SURFACE_STYLE_USAGE(.BOTH.,#303845); +#303845 = SURFACE_SIDE_STYLE('',(#303846)); +#303846 = SURFACE_STYLE_FILL_AREA(#303847); +#303847 = FILL_AREA_STYLE('',(#303848)); +#303848 = FILL_AREA_STYLE_COLOUR('',#285989); +#303849 = CURVE_STYLE('',#303850,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303851 = OVER_RIDING_STYLED_ITEM('overriding color',(#303852),#104253, + #303779); +#303852 = PRESENTATION_STYLE_ASSIGNMENT((#303853,#303858)); +#303853 = SURFACE_STYLE_USAGE(.BOTH.,#303854); +#303854 = SURFACE_SIDE_STYLE('',(#303855)); +#303855 = SURFACE_STYLE_FILL_AREA(#303856); +#303856 = FILL_AREA_STYLE('',(#303857)); +#303857 = FILL_AREA_STYLE_COLOUR('',#285989); +#303858 = CURVE_STYLE('',#303859,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303860 = OVER_RIDING_STYLED_ITEM('overriding color',(#303861),#104287, + #303779); +#303861 = PRESENTATION_STYLE_ASSIGNMENT((#303862,#303867)); +#303862 = SURFACE_STYLE_USAGE(.BOTH.,#303863); +#303863 = SURFACE_SIDE_STYLE('',(#303864)); +#303864 = SURFACE_STYLE_FILL_AREA(#303865); +#303865 = FILL_AREA_STYLE('',(#303866)); +#303866 = FILL_AREA_STYLE_COLOUR('',#285989); +#303867 = CURVE_STYLE('',#303868,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303869 = OVER_RIDING_STYLED_ITEM('overriding color',(#303870),#104319, + #303779); +#303870 = PRESENTATION_STYLE_ASSIGNMENT((#303871,#303876)); +#303871 = SURFACE_STYLE_USAGE(.BOTH.,#303872); +#303872 = SURFACE_SIDE_STYLE('',(#303873)); +#303873 = SURFACE_STYLE_FILL_AREA(#303874); +#303874 = FILL_AREA_STYLE('',(#303875)); +#303875 = FILL_AREA_STYLE_COLOUR('',#285989); +#303876 = CURVE_STYLE('',#303877,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303878 = OVER_RIDING_STYLED_ITEM('overriding color',(#303879),#104353, + #303779); +#303879 = PRESENTATION_STYLE_ASSIGNMENT((#303880,#303885)); +#303880 = SURFACE_STYLE_USAGE(.BOTH.,#303881); +#303881 = SURFACE_SIDE_STYLE('',(#303882)); +#303882 = SURFACE_STYLE_FILL_AREA(#303883); +#303883 = FILL_AREA_STYLE('',(#303884)); +#303884 = FILL_AREA_STYLE_COLOUR('',#285989); +#303885 = CURVE_STYLE('',#303886,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303887 = OVER_RIDING_STYLED_ITEM('overriding color',(#303888),#104385, + #303779); +#303888 = PRESENTATION_STYLE_ASSIGNMENT((#303889,#303894)); +#303889 = SURFACE_STYLE_USAGE(.BOTH.,#303890); +#303890 = SURFACE_SIDE_STYLE('',(#303891)); +#303891 = SURFACE_STYLE_FILL_AREA(#303892); +#303892 = FILL_AREA_STYLE('',(#303893)); +#303893 = FILL_AREA_STYLE_COLOUR('',#285989); +#303894 = CURVE_STYLE('',#303895,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303896 = OVER_RIDING_STYLED_ITEM('overriding color',(#303897),#104419, + #303779); +#303897 = PRESENTATION_STYLE_ASSIGNMENT((#303898,#303903)); +#303898 = SURFACE_STYLE_USAGE(.BOTH.,#303899); +#303899 = SURFACE_SIDE_STYLE('',(#303900)); +#303900 = SURFACE_STYLE_FILL_AREA(#303901); +#303901 = FILL_AREA_STYLE('',(#303902)); +#303902 = FILL_AREA_STYLE_COLOUR('',#285989); +#303903 = CURVE_STYLE('',#303904,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303905 = OVER_RIDING_STYLED_ITEM('overriding color',(#303906),#104451, + #303779); +#303906 = PRESENTATION_STYLE_ASSIGNMENT((#303907,#303912)); +#303907 = SURFACE_STYLE_USAGE(.BOTH.,#303908); +#303908 = SURFACE_SIDE_STYLE('',(#303909)); +#303909 = SURFACE_STYLE_FILL_AREA(#303910); +#303910 = FILL_AREA_STYLE('',(#303911)); +#303911 = FILL_AREA_STYLE_COLOUR('',#285989); +#303912 = CURVE_STYLE('',#303913,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303914 = OVER_RIDING_STYLED_ITEM('overriding color',(#303915),#104485, + #303779); +#303915 = PRESENTATION_STYLE_ASSIGNMENT((#303916,#303921)); +#303916 = SURFACE_STYLE_USAGE(.BOTH.,#303917); +#303917 = SURFACE_SIDE_STYLE('',(#303918)); +#303918 = SURFACE_STYLE_FILL_AREA(#303919); +#303919 = FILL_AREA_STYLE('',(#303920)); +#303920 = FILL_AREA_STYLE_COLOUR('',#285989); +#303921 = CURVE_STYLE('',#303922,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303923 = OVER_RIDING_STYLED_ITEM('overriding color',(#303924),#104517, + #303779); +#303924 = PRESENTATION_STYLE_ASSIGNMENT((#303925,#303930)); +#303925 = SURFACE_STYLE_USAGE(.BOTH.,#303926); +#303926 = SURFACE_SIDE_STYLE('',(#303927)); +#303927 = SURFACE_STYLE_FILL_AREA(#303928); +#303928 = FILL_AREA_STYLE('',(#303929)); +#303929 = FILL_AREA_STYLE_COLOUR('',#285989); +#303930 = CURVE_STYLE('',#303931,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#303931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303932 = STYLED_ITEM('color',(#303933),#104535); +#303933 = PRESENTATION_STYLE_ASSIGNMENT((#303934,#303939)); +#303934 = SURFACE_STYLE_USAGE(.BOTH.,#303935); +#303935 = SURFACE_SIDE_STYLE('',(#303936)); +#303936 = SURFACE_STYLE_FILL_AREA(#303937); +#303937 = FILL_AREA_STYLE('',(#303938)); +#303938 = FILL_AREA_STYLE_COLOUR('',#270350); +#303939 = CURVE_STYLE('',#303940,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303941 = STYLED_ITEM('color',(#303942),#104547); +#303942 = PRESENTATION_STYLE_ASSIGNMENT((#303943,#303948)); +#303943 = SURFACE_STYLE_USAGE(.BOTH.,#303944); +#303944 = SURFACE_SIDE_STYLE('',(#303945)); +#303945 = SURFACE_STYLE_FILL_AREA(#303946); +#303946 = FILL_AREA_STYLE('',(#303947)); +#303947 = FILL_AREA_STYLE_COLOUR('',#270350); +#303948 = CURVE_STYLE('',#303949,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303950 = STYLED_ITEM('color',(#303951),#104559); +#303951 = PRESENTATION_STYLE_ASSIGNMENT((#303952,#303957)); +#303952 = SURFACE_STYLE_USAGE(.BOTH.,#303953); +#303953 = SURFACE_SIDE_STYLE('',(#303954)); +#303954 = SURFACE_STYLE_FILL_AREA(#303955); +#303955 = FILL_AREA_STYLE('',(#303956)); +#303956 = FILL_AREA_STYLE_COLOUR('',#270350); +#303957 = CURVE_STYLE('',#303958,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303959 = STYLED_ITEM('color',(#303960),#104590); +#303960 = PRESENTATION_STYLE_ASSIGNMENT((#303961,#303966)); +#303961 = SURFACE_STYLE_USAGE(.BOTH.,#303962); +#303962 = SURFACE_SIDE_STYLE('',(#303963)); +#303963 = SURFACE_STYLE_FILL_AREA(#303964); +#303964 = FILL_AREA_STYLE('',(#303965)); +#303965 = FILL_AREA_STYLE_COLOUR('',#270350); +#303966 = CURVE_STYLE('',#303967,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303968 = STYLED_ITEM('color',(#303969),#104614); +#303969 = PRESENTATION_STYLE_ASSIGNMENT((#303970,#303975)); +#303970 = SURFACE_STYLE_USAGE(.BOTH.,#303971); +#303971 = SURFACE_SIDE_STYLE('',(#303972)); +#303972 = SURFACE_STYLE_FILL_AREA(#303973); +#303973 = FILL_AREA_STYLE('',(#303974)); +#303974 = FILL_AREA_STYLE_COLOUR('',#270350); +#303975 = CURVE_STYLE('',#303976,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303977 = STYLED_ITEM('color',(#303978),#104638); +#303978 = PRESENTATION_STYLE_ASSIGNMENT((#303979,#303984)); +#303979 = SURFACE_STYLE_USAGE(.BOTH.,#303980); +#303980 = SURFACE_SIDE_STYLE('',(#303981)); +#303981 = SURFACE_STYLE_FILL_AREA(#303982); +#303982 = FILL_AREA_STYLE('',(#303983)); +#303983 = FILL_AREA_STYLE_COLOUR('',#270350); +#303984 = CURVE_STYLE('',#303985,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303986 = STYLED_ITEM('color',(#303987),#104655); +#303987 = PRESENTATION_STYLE_ASSIGNMENT((#303988,#303993)); +#303988 = SURFACE_STYLE_USAGE(.BOTH.,#303989); +#303989 = SURFACE_SIDE_STYLE('',(#303990)); +#303990 = SURFACE_STYLE_FILL_AREA(#303991); +#303991 = FILL_AREA_STYLE('',(#303992)); +#303992 = FILL_AREA_STYLE_COLOUR('',#270350); +#303993 = CURVE_STYLE('',#303994,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#303994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#303995 = STYLED_ITEM('color',(#303996),#104686); +#303996 = PRESENTATION_STYLE_ASSIGNMENT((#303997,#304002)); +#303997 = SURFACE_STYLE_USAGE(.BOTH.,#303998); +#303998 = SURFACE_SIDE_STYLE('',(#303999)); +#303999 = SURFACE_STYLE_FILL_AREA(#304000); +#304000 = FILL_AREA_STYLE('',(#304001)); +#304001 = FILL_AREA_STYLE_COLOUR('',#270350); +#304002 = CURVE_STYLE('',#304003,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304004 = STYLED_ITEM('color',(#304005),#104710); +#304005 = PRESENTATION_STYLE_ASSIGNMENT((#304006,#304011)); +#304006 = SURFACE_STYLE_USAGE(.BOTH.,#304007); +#304007 = SURFACE_SIDE_STYLE('',(#304008)); +#304008 = SURFACE_STYLE_FILL_AREA(#304009); +#304009 = FILL_AREA_STYLE('',(#304010)); +#304010 = FILL_AREA_STYLE_COLOUR('',#270350); +#304011 = CURVE_STYLE('',#304012,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304013 = STYLED_ITEM('color',(#304014),#104734); +#304014 = PRESENTATION_STYLE_ASSIGNMENT((#304015,#304020)); +#304015 = SURFACE_STYLE_USAGE(.BOTH.,#304016); +#304016 = SURFACE_SIDE_STYLE('',(#304017)); +#304017 = SURFACE_STYLE_FILL_AREA(#304018); +#304018 = FILL_AREA_STYLE('',(#304019)); +#304019 = FILL_AREA_STYLE_COLOUR('',#270350); +#304020 = CURVE_STYLE('',#304021,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304022 = STYLED_ITEM('color',(#304023),#104751); +#304023 = PRESENTATION_STYLE_ASSIGNMENT((#304024,#304029)); +#304024 = SURFACE_STYLE_USAGE(.BOTH.,#304025); +#304025 = SURFACE_SIDE_STYLE('',(#304026)); +#304026 = SURFACE_STYLE_FILL_AREA(#304027); +#304027 = FILL_AREA_STYLE('',(#304028)); +#304028 = FILL_AREA_STYLE_COLOUR('',#270350); +#304029 = CURVE_STYLE('',#304030,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304031 = STYLED_ITEM('color',(#304032),#104782); +#304032 = PRESENTATION_STYLE_ASSIGNMENT((#304033,#304038)); +#304033 = SURFACE_STYLE_USAGE(.BOTH.,#304034); +#304034 = SURFACE_SIDE_STYLE('',(#304035)); +#304035 = SURFACE_STYLE_FILL_AREA(#304036); +#304036 = FILL_AREA_STYLE('',(#304037)); +#304037 = FILL_AREA_STYLE_COLOUR('',#270350); +#304038 = CURVE_STYLE('',#304039,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304040 = STYLED_ITEM('color',(#304041),#104806); +#304041 = PRESENTATION_STYLE_ASSIGNMENT((#304042,#304047)); +#304042 = SURFACE_STYLE_USAGE(.BOTH.,#304043); +#304043 = SURFACE_SIDE_STYLE('',(#304044)); +#304044 = SURFACE_STYLE_FILL_AREA(#304045); +#304045 = FILL_AREA_STYLE('',(#304046)); +#304046 = FILL_AREA_STYLE_COLOUR('',#270350); +#304047 = CURVE_STYLE('',#304048,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304049 = STYLED_ITEM('color',(#304050),#104830); +#304050 = PRESENTATION_STYLE_ASSIGNMENT((#304051,#304056)); +#304051 = SURFACE_STYLE_USAGE(.BOTH.,#304052); +#304052 = SURFACE_SIDE_STYLE('',(#304053)); +#304053 = SURFACE_STYLE_FILL_AREA(#304054); +#304054 = FILL_AREA_STYLE('',(#304055)); +#304055 = FILL_AREA_STYLE_COLOUR('',#270350); +#304056 = CURVE_STYLE('',#304057,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304058 = STYLED_ITEM('color',(#304059),#104847); +#304059 = PRESENTATION_STYLE_ASSIGNMENT((#304060,#304065)); +#304060 = SURFACE_STYLE_USAGE(.BOTH.,#304061); +#304061 = SURFACE_SIDE_STYLE('',(#304062)); +#304062 = SURFACE_STYLE_FILL_AREA(#304063); +#304063 = FILL_AREA_STYLE('',(#304064)); +#304064 = FILL_AREA_STYLE_COLOUR('',#270350); +#304065 = CURVE_STYLE('',#304066,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304067 = STYLED_ITEM('color',(#304068),#104878); +#304068 = PRESENTATION_STYLE_ASSIGNMENT((#304069,#304074)); +#304069 = SURFACE_STYLE_USAGE(.BOTH.,#304070); +#304070 = SURFACE_SIDE_STYLE('',(#304071)); +#304071 = SURFACE_STYLE_FILL_AREA(#304072); +#304072 = FILL_AREA_STYLE('',(#304073)); +#304073 = FILL_AREA_STYLE_COLOUR('',#270350); +#304074 = CURVE_STYLE('',#304075,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304076 = STYLED_ITEM('color',(#304077),#104902); +#304077 = PRESENTATION_STYLE_ASSIGNMENT((#304078,#304083)); +#304078 = SURFACE_STYLE_USAGE(.BOTH.,#304079); +#304079 = SURFACE_SIDE_STYLE('',(#304080)); +#304080 = SURFACE_STYLE_FILL_AREA(#304081); +#304081 = FILL_AREA_STYLE('',(#304082)); +#304082 = FILL_AREA_STYLE_COLOUR('',#270350); +#304083 = CURVE_STYLE('',#304084,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304085 = STYLED_ITEM('color',(#304086),#104926); +#304086 = PRESENTATION_STYLE_ASSIGNMENT((#304087,#304092)); +#304087 = SURFACE_STYLE_USAGE(.BOTH.,#304088); +#304088 = SURFACE_SIDE_STYLE('',(#304089)); +#304089 = SURFACE_STYLE_FILL_AREA(#304090); +#304090 = FILL_AREA_STYLE('',(#304091)); +#304091 = FILL_AREA_STYLE_COLOUR('',#270350); +#304092 = CURVE_STYLE('',#304093,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304094 = STYLED_ITEM('color',(#304095),#104943); +#304095 = PRESENTATION_STYLE_ASSIGNMENT((#304096,#304101)); +#304096 = SURFACE_STYLE_USAGE(.BOTH.,#304097); +#304097 = SURFACE_SIDE_STYLE('',(#304098)); +#304098 = SURFACE_STYLE_FILL_AREA(#304099); +#304099 = FILL_AREA_STYLE('',(#304100)); +#304100 = FILL_AREA_STYLE_COLOUR('',#270350); +#304101 = CURVE_STYLE('',#304102,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304103 = STYLED_ITEM('color',(#304104),#104974); +#304104 = PRESENTATION_STYLE_ASSIGNMENT((#304105,#304110)); +#304105 = SURFACE_STYLE_USAGE(.BOTH.,#304106); +#304106 = SURFACE_SIDE_STYLE('',(#304107)); +#304107 = SURFACE_STYLE_FILL_AREA(#304108); +#304108 = FILL_AREA_STYLE('',(#304109)); +#304109 = FILL_AREA_STYLE_COLOUR('',#270350); +#304110 = CURVE_STYLE('',#304111,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304112 = STYLED_ITEM('color',(#304113),#104998); +#304113 = PRESENTATION_STYLE_ASSIGNMENT((#304114,#304119)); +#304114 = SURFACE_STYLE_USAGE(.BOTH.,#304115); +#304115 = SURFACE_SIDE_STYLE('',(#304116)); +#304116 = SURFACE_STYLE_FILL_AREA(#304117); +#304117 = FILL_AREA_STYLE('',(#304118)); +#304118 = FILL_AREA_STYLE_COLOUR('',#270350); +#304119 = CURVE_STYLE('',#304120,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304121 = STYLED_ITEM('color',(#304122),#105022); +#304122 = PRESENTATION_STYLE_ASSIGNMENT((#304123,#304128)); +#304123 = SURFACE_STYLE_USAGE(.BOTH.,#304124); +#304124 = SURFACE_SIDE_STYLE('',(#304125)); +#304125 = SURFACE_STYLE_FILL_AREA(#304126); +#304126 = FILL_AREA_STYLE('',(#304127)); +#304127 = FILL_AREA_STYLE_COLOUR('',#270350); +#304128 = CURVE_STYLE('',#304129,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304130 = STYLED_ITEM('color',(#304131),#105039); +#304131 = PRESENTATION_STYLE_ASSIGNMENT((#304132,#304137)); +#304132 = SURFACE_STYLE_USAGE(.BOTH.,#304133); +#304133 = SURFACE_SIDE_STYLE('',(#304134)); +#304134 = SURFACE_STYLE_FILL_AREA(#304135); +#304135 = FILL_AREA_STYLE('',(#304136)); +#304136 = FILL_AREA_STYLE_COLOUR('',#270350); +#304137 = CURVE_STYLE('',#304138,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304139 = STYLED_ITEM('color',(#304140),#105070); +#304140 = PRESENTATION_STYLE_ASSIGNMENT((#304141,#304146)); +#304141 = SURFACE_STYLE_USAGE(.BOTH.,#304142); +#304142 = SURFACE_SIDE_STYLE('',(#304143)); +#304143 = SURFACE_STYLE_FILL_AREA(#304144); +#304144 = FILL_AREA_STYLE('',(#304145)); +#304145 = FILL_AREA_STYLE_COLOUR('',#270350); +#304146 = CURVE_STYLE('',#304147,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304148 = STYLED_ITEM('color',(#304149),#105094); +#304149 = PRESENTATION_STYLE_ASSIGNMENT((#304150,#304155)); +#304150 = SURFACE_STYLE_USAGE(.BOTH.,#304151); +#304151 = SURFACE_SIDE_STYLE('',(#304152)); +#304152 = SURFACE_STYLE_FILL_AREA(#304153); +#304153 = FILL_AREA_STYLE('',(#304154)); +#304154 = FILL_AREA_STYLE_COLOUR('',#270350); +#304155 = CURVE_STYLE('',#304156,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304157 = STYLED_ITEM('color',(#304158),#105118); +#304158 = PRESENTATION_STYLE_ASSIGNMENT((#304159,#304164)); +#304159 = SURFACE_STYLE_USAGE(.BOTH.,#304160); +#304160 = SURFACE_SIDE_STYLE('',(#304161)); +#304161 = SURFACE_STYLE_FILL_AREA(#304162); +#304162 = FILL_AREA_STYLE('',(#304163)); +#304163 = FILL_AREA_STYLE_COLOUR('',#270350); +#304164 = CURVE_STYLE('',#304165,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304166 = STYLED_ITEM('color',(#304167),#105135); +#304167 = PRESENTATION_STYLE_ASSIGNMENT((#304168,#304173)); +#304168 = SURFACE_STYLE_USAGE(.BOTH.,#304169); +#304169 = SURFACE_SIDE_STYLE('',(#304170)); +#304170 = SURFACE_STYLE_FILL_AREA(#304171); +#304171 = FILL_AREA_STYLE('',(#304172)); +#304172 = FILL_AREA_STYLE_COLOUR('',#270350); +#304173 = CURVE_STYLE('',#304174,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304175 = STYLED_ITEM('color',(#304176),#105166); +#304176 = PRESENTATION_STYLE_ASSIGNMENT((#304177,#304182)); +#304177 = SURFACE_STYLE_USAGE(.BOTH.,#304178); +#304178 = SURFACE_SIDE_STYLE('',(#304179)); +#304179 = SURFACE_STYLE_FILL_AREA(#304180); +#304180 = FILL_AREA_STYLE('',(#304181)); +#304181 = FILL_AREA_STYLE_COLOUR('',#270350); +#304182 = CURVE_STYLE('',#304183,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304184 = STYLED_ITEM('color',(#304185),#105190); +#304185 = PRESENTATION_STYLE_ASSIGNMENT((#304186,#304191)); +#304186 = SURFACE_STYLE_USAGE(.BOTH.,#304187); +#304187 = SURFACE_SIDE_STYLE('',(#304188)); +#304188 = SURFACE_STYLE_FILL_AREA(#304189); +#304189 = FILL_AREA_STYLE('',(#304190)); +#304190 = FILL_AREA_STYLE_COLOUR('',#270350); +#304191 = CURVE_STYLE('',#304192,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304193 = STYLED_ITEM('color',(#304194),#105214); +#304194 = PRESENTATION_STYLE_ASSIGNMENT((#304195,#304200)); +#304195 = SURFACE_STYLE_USAGE(.BOTH.,#304196); +#304196 = SURFACE_SIDE_STYLE('',(#304197)); +#304197 = SURFACE_STYLE_FILL_AREA(#304198); +#304198 = FILL_AREA_STYLE('',(#304199)); +#304199 = FILL_AREA_STYLE_COLOUR('',#270350); +#304200 = CURVE_STYLE('',#304201,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304202 = STYLED_ITEM('color',(#304203),#105231); +#304203 = PRESENTATION_STYLE_ASSIGNMENT((#304204,#304209)); +#304204 = SURFACE_STYLE_USAGE(.BOTH.,#304205); +#304205 = SURFACE_SIDE_STYLE('',(#304206)); +#304206 = SURFACE_STYLE_FILL_AREA(#304207); +#304207 = FILL_AREA_STYLE('',(#304208)); +#304208 = FILL_AREA_STYLE_COLOUR('',#270350); +#304209 = CURVE_STYLE('',#304210,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304211 = STYLED_ITEM('color',(#304212),#105262); +#304212 = PRESENTATION_STYLE_ASSIGNMENT((#304213,#304218)); +#304213 = SURFACE_STYLE_USAGE(.BOTH.,#304214); +#304214 = SURFACE_SIDE_STYLE('',(#304215)); +#304215 = SURFACE_STYLE_FILL_AREA(#304216); +#304216 = FILL_AREA_STYLE('',(#304217)); +#304217 = FILL_AREA_STYLE_COLOUR('',#270350); +#304218 = CURVE_STYLE('',#304219,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304220 = STYLED_ITEM('color',(#304221),#105286); +#304221 = PRESENTATION_STYLE_ASSIGNMENT((#304222,#304227)); +#304222 = SURFACE_STYLE_USAGE(.BOTH.,#304223); +#304223 = SURFACE_SIDE_STYLE('',(#304224)); +#304224 = SURFACE_STYLE_FILL_AREA(#304225); +#304225 = FILL_AREA_STYLE('',(#304226)); +#304226 = FILL_AREA_STYLE_COLOUR('',#270350); +#304227 = CURVE_STYLE('',#304228,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304229 = STYLED_ITEM('color',(#304230),#105310); +#304230 = PRESENTATION_STYLE_ASSIGNMENT((#304231,#304236)); +#304231 = SURFACE_STYLE_USAGE(.BOTH.,#304232); +#304232 = SURFACE_SIDE_STYLE('',(#304233)); +#304233 = SURFACE_STYLE_FILL_AREA(#304234); +#304234 = FILL_AREA_STYLE('',(#304235)); +#304235 = FILL_AREA_STYLE_COLOUR('',#270350); +#304236 = CURVE_STYLE('',#304237,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304238 = STYLED_ITEM('color',(#304239),#105327); +#304239 = PRESENTATION_STYLE_ASSIGNMENT((#304240,#304245)); +#304240 = SURFACE_STYLE_USAGE(.BOTH.,#304241); +#304241 = SURFACE_SIDE_STYLE('',(#304242)); +#304242 = SURFACE_STYLE_FILL_AREA(#304243); +#304243 = FILL_AREA_STYLE('',(#304244)); +#304244 = FILL_AREA_STYLE_COLOUR('',#285989); +#304245 = CURVE_STYLE('',#304246,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304247 = STYLED_ITEM('color',(#304248),#105344); +#304248 = PRESENTATION_STYLE_ASSIGNMENT((#304249,#304254)); +#304249 = SURFACE_STYLE_USAGE(.BOTH.,#304250); +#304250 = SURFACE_SIDE_STYLE('',(#304251)); +#304251 = SURFACE_STYLE_FILL_AREA(#304252); +#304252 = FILL_AREA_STYLE('',(#304253)); +#304253 = FILL_AREA_STYLE_COLOUR('',#285989); +#304254 = CURVE_STYLE('',#304255,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304256 = STYLED_ITEM('color',(#304257),#105391); +#304257 = PRESENTATION_STYLE_ASSIGNMENT((#304258,#304263)); +#304258 = SURFACE_STYLE_USAGE(.BOTH.,#304259); +#304259 = SURFACE_SIDE_STYLE('',(#304260)); +#304260 = SURFACE_STYLE_FILL_AREA(#304261); +#304261 = FILL_AREA_STYLE('',(#304262)); +#304262 = FILL_AREA_STYLE_COLOUR('',#285989); +#304263 = CURVE_STYLE('',#304264,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304265 = STYLED_ITEM('color',(#304266),#105408); +#304266 = PRESENTATION_STYLE_ASSIGNMENT((#304267,#304272)); +#304267 = SURFACE_STYLE_USAGE(.BOTH.,#304268); +#304268 = SURFACE_SIDE_STYLE('',(#304269)); +#304269 = SURFACE_STYLE_FILL_AREA(#304270); +#304270 = FILL_AREA_STYLE('',(#304271)); +#304271 = FILL_AREA_STYLE_COLOUR('',#285989); +#304272 = CURVE_STYLE('',#304273,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304274 = STYLED_ITEM('color',(#304275),#105455); +#304275 = PRESENTATION_STYLE_ASSIGNMENT((#304276,#304281)); +#304276 = SURFACE_STYLE_USAGE(.BOTH.,#304277); +#304277 = SURFACE_SIDE_STYLE('',(#304278)); +#304278 = SURFACE_STYLE_FILL_AREA(#304279); +#304279 = FILL_AREA_STYLE('',(#304280)); +#304280 = FILL_AREA_STYLE_COLOUR('',#285989); +#304281 = CURVE_STYLE('',#304282,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304283 = STYLED_ITEM('color',(#304284),#105472); +#304284 = PRESENTATION_STYLE_ASSIGNMENT((#304285,#304290)); +#304285 = SURFACE_STYLE_USAGE(.BOTH.,#304286); +#304286 = SURFACE_SIDE_STYLE('',(#304287)); +#304287 = SURFACE_STYLE_FILL_AREA(#304288); +#304288 = FILL_AREA_STYLE('',(#304289)); +#304289 = FILL_AREA_STYLE_COLOUR('',#285989); +#304290 = CURVE_STYLE('',#304291,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304292 = STYLED_ITEM('color',(#304293),#105519); +#304293 = PRESENTATION_STYLE_ASSIGNMENT((#304294,#304299)); +#304294 = SURFACE_STYLE_USAGE(.BOTH.,#304295); +#304295 = SURFACE_SIDE_STYLE('',(#304296)); +#304296 = SURFACE_STYLE_FILL_AREA(#304297); +#304297 = FILL_AREA_STYLE('',(#304298)); +#304298 = FILL_AREA_STYLE_COLOUR('',#285989); +#304299 = CURVE_STYLE('',#304300,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304301 = STYLED_ITEM('color',(#304302),#105536); +#304302 = PRESENTATION_STYLE_ASSIGNMENT((#304303,#304308)); +#304303 = SURFACE_STYLE_USAGE(.BOTH.,#304304); +#304304 = SURFACE_SIDE_STYLE('',(#304305)); +#304305 = SURFACE_STYLE_FILL_AREA(#304306); +#304306 = FILL_AREA_STYLE('',(#304307)); +#304307 = FILL_AREA_STYLE_COLOUR('',#285989); +#304308 = CURVE_STYLE('',#304309,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304310 = STYLED_ITEM('color',(#304311),#105583); +#304311 = PRESENTATION_STYLE_ASSIGNMENT((#304312,#304317)); +#304312 = SURFACE_STYLE_USAGE(.BOTH.,#304313); +#304313 = SURFACE_SIDE_STYLE('',(#304314)); +#304314 = SURFACE_STYLE_FILL_AREA(#304315); +#304315 = FILL_AREA_STYLE('',(#304316)); +#304316 = FILL_AREA_STYLE_COLOUR('',#285989); +#304317 = CURVE_STYLE('',#304318,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304319 = STYLED_ITEM('color',(#304320),#105600); +#304320 = PRESENTATION_STYLE_ASSIGNMENT((#304321,#304326)); +#304321 = SURFACE_STYLE_USAGE(.BOTH.,#304322); +#304322 = SURFACE_SIDE_STYLE('',(#304323)); +#304323 = SURFACE_STYLE_FILL_AREA(#304324); +#304324 = FILL_AREA_STYLE('',(#304325)); +#304325 = FILL_AREA_STYLE_COLOUR('',#285989); +#304326 = CURVE_STYLE('',#304327,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304328 = STYLED_ITEM('color',(#304329),#105647); +#304329 = PRESENTATION_STYLE_ASSIGNMENT((#304330,#304335)); +#304330 = SURFACE_STYLE_USAGE(.BOTH.,#304331); +#304331 = SURFACE_SIDE_STYLE('',(#304332)); +#304332 = SURFACE_STYLE_FILL_AREA(#304333); +#304333 = FILL_AREA_STYLE('',(#304334)); +#304334 = FILL_AREA_STYLE_COLOUR('',#285989); +#304335 = CURVE_STYLE('',#304336,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304337 = STYLED_ITEM('color',(#304338),#105664); +#304338 = PRESENTATION_STYLE_ASSIGNMENT((#304339,#304344)); +#304339 = SURFACE_STYLE_USAGE(.BOTH.,#304340); +#304340 = SURFACE_SIDE_STYLE('',(#304341)); +#304341 = SURFACE_STYLE_FILL_AREA(#304342); +#304342 = FILL_AREA_STYLE('',(#304343)); +#304343 = FILL_AREA_STYLE_COLOUR('',#285989); +#304344 = CURVE_STYLE('',#304345,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304346 = STYLED_ITEM('color',(#304347),#105711); +#304347 = PRESENTATION_STYLE_ASSIGNMENT((#304348,#304353)); +#304348 = SURFACE_STYLE_USAGE(.BOTH.,#304349); +#304349 = SURFACE_SIDE_STYLE('',(#304350)); +#304350 = SURFACE_STYLE_FILL_AREA(#304351); +#304351 = FILL_AREA_STYLE('',(#304352)); +#304352 = FILL_AREA_STYLE_COLOUR('',#285989); +#304353 = CURVE_STYLE('',#304354,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304355 = STYLED_ITEM('color',(#304356),#105728); +#304356 = PRESENTATION_STYLE_ASSIGNMENT((#304357,#304362)); +#304357 = SURFACE_STYLE_USAGE(.BOTH.,#304358); +#304358 = SURFACE_SIDE_STYLE('',(#304359)); +#304359 = SURFACE_STYLE_FILL_AREA(#304360); +#304360 = FILL_AREA_STYLE('',(#304361)); +#304361 = FILL_AREA_STYLE_COLOUR('',#285989); +#304362 = CURVE_STYLE('',#304363,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304364 = STYLED_ITEM('color',(#304365),#105775); +#304365 = PRESENTATION_STYLE_ASSIGNMENT((#304366,#304371)); +#304366 = SURFACE_STYLE_USAGE(.BOTH.,#304367); +#304367 = SURFACE_SIDE_STYLE('',(#304368)); +#304368 = SURFACE_STYLE_FILL_AREA(#304369); +#304369 = FILL_AREA_STYLE('',(#304370)); +#304370 = FILL_AREA_STYLE_COLOUR('',#285989); +#304371 = CURVE_STYLE('',#304372,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304373 = STYLED_ITEM('color',(#304374),#105792); +#304374 = PRESENTATION_STYLE_ASSIGNMENT((#304375,#304380)); +#304375 = SURFACE_STYLE_USAGE(.BOTH.,#304376); +#304376 = SURFACE_SIDE_STYLE('',(#304377)); +#304377 = SURFACE_STYLE_FILL_AREA(#304378); +#304378 = FILL_AREA_STYLE('',(#304379)); +#304379 = FILL_AREA_STYLE_COLOUR('',#285989); +#304380 = CURVE_STYLE('',#304381,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304382 = STYLED_ITEM('color',(#304383),#105839); +#304383 = PRESENTATION_STYLE_ASSIGNMENT((#304384,#304389)); +#304384 = SURFACE_STYLE_USAGE(.BOTH.,#304385); +#304385 = SURFACE_SIDE_STYLE('',(#304386)); +#304386 = SURFACE_STYLE_FILL_AREA(#304387); +#304387 = FILL_AREA_STYLE('',(#304388)); +#304388 = FILL_AREA_STYLE_COLOUR('',#285989); +#304389 = CURVE_STYLE('',#304390,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304391 = STYLED_ITEM('color',(#304392),#105856); +#304392 = PRESENTATION_STYLE_ASSIGNMENT((#304393,#304398)); +#304393 = SURFACE_STYLE_USAGE(.BOTH.,#304394); +#304394 = SURFACE_SIDE_STYLE('',(#304395)); +#304395 = SURFACE_STYLE_FILL_AREA(#304396); +#304396 = FILL_AREA_STYLE('',(#304397)); +#304397 = FILL_AREA_STYLE_COLOUR('',#285989); +#304398 = CURVE_STYLE('',#304399,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304400 = STYLED_ITEM('color',(#304401),#105903); +#304401 = PRESENTATION_STYLE_ASSIGNMENT((#304402,#304407)); +#304402 = SURFACE_STYLE_USAGE(.BOTH.,#304403); +#304403 = SURFACE_SIDE_STYLE('',(#304404)); +#304404 = SURFACE_STYLE_FILL_AREA(#304405); +#304405 = FILL_AREA_STYLE('',(#304406)); +#304406 = FILL_AREA_STYLE_COLOUR('',#285989); +#304407 = CURVE_STYLE('',#304408,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304409 = STYLED_ITEM('color',(#304410),#105920); +#304410 = PRESENTATION_STYLE_ASSIGNMENT((#304411,#304416)); +#304411 = SURFACE_STYLE_USAGE(.BOTH.,#304412); +#304412 = SURFACE_SIDE_STYLE('',(#304413)); +#304413 = SURFACE_STYLE_FILL_AREA(#304414); +#304414 = FILL_AREA_STYLE('',(#304415)); +#304415 = FILL_AREA_STYLE_COLOUR('',#285989); +#304416 = CURVE_STYLE('',#304417,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304418 = STYLED_ITEM('color',(#304419),#105967); +#304419 = PRESENTATION_STYLE_ASSIGNMENT((#304420,#304425)); +#304420 = SURFACE_STYLE_USAGE(.BOTH.,#304421); +#304421 = SURFACE_SIDE_STYLE('',(#304422)); +#304422 = SURFACE_STYLE_FILL_AREA(#304423); +#304423 = FILL_AREA_STYLE('',(#304424)); +#304424 = FILL_AREA_STYLE_COLOUR('',#285989); +#304425 = CURVE_STYLE('',#304426,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304427 = STYLED_ITEM('color',(#304428),#105984); +#304428 = PRESENTATION_STYLE_ASSIGNMENT((#304429,#304434)); +#304429 = SURFACE_STYLE_USAGE(.BOTH.,#304430); +#304430 = SURFACE_SIDE_STYLE('',(#304431)); +#304431 = SURFACE_STYLE_FILL_AREA(#304432); +#304432 = FILL_AREA_STYLE('',(#304433)); +#304433 = FILL_AREA_STYLE_COLOUR('',#285989); +#304434 = CURVE_STYLE('',#304435,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304436 = STYLED_ITEM('color',(#304437),#106031); +#304437 = PRESENTATION_STYLE_ASSIGNMENT((#304438,#304443)); +#304438 = SURFACE_STYLE_USAGE(.BOTH.,#304439); +#304439 = SURFACE_SIDE_STYLE('',(#304440)); +#304440 = SURFACE_STYLE_FILL_AREA(#304441); +#304441 = FILL_AREA_STYLE('',(#304442)); +#304442 = FILL_AREA_STYLE_COLOUR('',#285989); +#304443 = CURVE_STYLE('',#304444,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304445 = STYLED_ITEM('color',(#304446),#106048); +#304446 = PRESENTATION_STYLE_ASSIGNMENT((#304447,#304452)); +#304447 = SURFACE_STYLE_USAGE(.BOTH.,#304448); +#304448 = SURFACE_SIDE_STYLE('',(#304449)); +#304449 = SURFACE_STYLE_FILL_AREA(#304450); +#304450 = FILL_AREA_STYLE('',(#304451)); +#304451 = FILL_AREA_STYLE_COLOUR('',#285989); +#304452 = CURVE_STYLE('',#304453,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304454 = STYLED_ITEM('color',(#304455),#106095); +#304455 = PRESENTATION_STYLE_ASSIGNMENT((#304456,#304461)); +#304456 = SURFACE_STYLE_USAGE(.BOTH.,#304457); +#304457 = SURFACE_SIDE_STYLE('',(#304458)); +#304458 = SURFACE_STYLE_FILL_AREA(#304459); +#304459 = FILL_AREA_STYLE('',(#304460)); +#304460 = FILL_AREA_STYLE_COLOUR('',#285989); +#304461 = CURVE_STYLE('',#304462,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304463 = STYLED_ITEM('color',(#304464),#106112); +#304464 = PRESENTATION_STYLE_ASSIGNMENT((#304465,#304470)); +#304465 = SURFACE_STYLE_USAGE(.BOTH.,#304466); +#304466 = SURFACE_SIDE_STYLE('',(#304467)); +#304467 = SURFACE_STYLE_FILL_AREA(#304468); +#304468 = FILL_AREA_STYLE('',(#304469)); +#304469 = FILL_AREA_STYLE_COLOUR('',#285989); +#304470 = CURVE_STYLE('',#304471,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304472 = STYLED_ITEM('color',(#304473),#106159); +#304473 = PRESENTATION_STYLE_ASSIGNMENT((#304474,#304479)); +#304474 = SURFACE_STYLE_USAGE(.BOTH.,#304475); +#304475 = SURFACE_SIDE_STYLE('',(#304476)); +#304476 = SURFACE_STYLE_FILL_AREA(#304477); +#304477 = FILL_AREA_STYLE('',(#304478)); +#304478 = FILL_AREA_STYLE_COLOUR('',#285989); +#304479 = CURVE_STYLE('',#304480,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304481 = STYLED_ITEM('color',(#304482),#106176); +#304482 = PRESENTATION_STYLE_ASSIGNMENT((#304483,#304488)); +#304483 = SURFACE_STYLE_USAGE(.BOTH.,#304484); +#304484 = SURFACE_SIDE_STYLE('',(#304485)); +#304485 = SURFACE_STYLE_FILL_AREA(#304486); +#304486 = FILL_AREA_STYLE('',(#304487)); +#304487 = FILL_AREA_STYLE_COLOUR('',#285989); +#304488 = CURVE_STYLE('',#304489,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304490 = STYLED_ITEM('color',(#304491),#106223); +#304491 = PRESENTATION_STYLE_ASSIGNMENT((#304492,#304497)); +#304492 = SURFACE_STYLE_USAGE(.BOTH.,#304493); +#304493 = SURFACE_SIDE_STYLE('',(#304494)); +#304494 = SURFACE_STYLE_FILL_AREA(#304495); +#304495 = FILL_AREA_STYLE('',(#304496)); +#304496 = FILL_AREA_STYLE_COLOUR('',#285989); +#304497 = CURVE_STYLE('',#304498,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304499 = STYLED_ITEM('color',(#304500),#106240); +#304500 = PRESENTATION_STYLE_ASSIGNMENT((#304501,#304506)); +#304501 = SURFACE_STYLE_USAGE(.BOTH.,#304502); +#304502 = SURFACE_SIDE_STYLE('',(#304503)); +#304503 = SURFACE_STYLE_FILL_AREA(#304504); +#304504 = FILL_AREA_STYLE('',(#304505)); +#304505 = FILL_AREA_STYLE_COLOUR('',#285989); +#304506 = CURVE_STYLE('',#304507,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304508 = STYLED_ITEM('color',(#304509),#106287); +#304509 = PRESENTATION_STYLE_ASSIGNMENT((#304510,#304515)); +#304510 = SURFACE_STYLE_USAGE(.BOTH.,#304511); +#304511 = SURFACE_SIDE_STYLE('',(#304512)); +#304512 = SURFACE_STYLE_FILL_AREA(#304513); +#304513 = FILL_AREA_STYLE('',(#304514)); +#304514 = FILL_AREA_STYLE_COLOUR('',#285989); +#304515 = CURVE_STYLE('',#304516,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304517 = STYLED_ITEM('color',(#304518),#106304); +#304518 = PRESENTATION_STYLE_ASSIGNMENT((#304519,#304524)); +#304519 = SURFACE_STYLE_USAGE(.BOTH.,#304520); +#304520 = SURFACE_SIDE_STYLE('',(#304521)); +#304521 = SURFACE_STYLE_FILL_AREA(#304522); +#304522 = FILL_AREA_STYLE('',(#304523)); +#304523 = FILL_AREA_STYLE_COLOUR('',#285989); +#304524 = CURVE_STYLE('',#304525,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304526 = STYLED_ITEM('color',(#304527),#106351); +#304527 = PRESENTATION_STYLE_ASSIGNMENT((#304528,#304533)); +#304528 = SURFACE_STYLE_USAGE(.BOTH.,#304529); +#304529 = SURFACE_SIDE_STYLE('',(#304530)); +#304530 = SURFACE_STYLE_FILL_AREA(#304531); +#304531 = FILL_AREA_STYLE('',(#304532)); +#304532 = FILL_AREA_STYLE_COLOUR('',#270350); +#304533 = CURVE_STYLE('',#304534,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304535 = STYLED_ITEM('color',(#304536),#106382); +#304536 = PRESENTATION_STYLE_ASSIGNMENT((#304537,#304542)); +#304537 = SURFACE_STYLE_USAGE(.BOTH.,#304538); +#304538 = SURFACE_SIDE_STYLE('',(#304539)); +#304539 = SURFACE_STYLE_FILL_AREA(#304540); +#304540 = FILL_AREA_STYLE('',(#304541)); +#304541 = FILL_AREA_STYLE_COLOUR('',#270350); +#304542 = CURVE_STYLE('',#304543,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304544 = OVER_RIDING_STYLED_ITEM('overriding color',(#304545),#106396, + #304535); +#304545 = PRESENTATION_STYLE_ASSIGNMENT((#304546,#304551)); +#304546 = SURFACE_STYLE_USAGE(.BOTH.,#304547); +#304547 = SURFACE_SIDE_STYLE('',(#304548)); +#304548 = SURFACE_STYLE_FILL_AREA(#304549); +#304549 = FILL_AREA_STYLE('',(#304550)); +#304550 = FILL_AREA_STYLE_COLOUR('',#285989); +#304551 = CURVE_STYLE('',#304552,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304553 = OVER_RIDING_STYLED_ITEM('overriding color',(#304554),#106412, + #304535); +#304554 = PRESENTATION_STYLE_ASSIGNMENT((#304555,#304560)); +#304555 = SURFACE_STYLE_USAGE(.BOTH.,#304556); +#304556 = SURFACE_SIDE_STYLE('',(#304557)); +#304557 = SURFACE_STYLE_FILL_AREA(#304558); +#304558 = FILL_AREA_STYLE('',(#304559)); +#304559 = FILL_AREA_STYLE_COLOUR('',#285989); +#304560 = CURVE_STYLE('',#304561,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304562 = STYLED_ITEM('color',(#304563),#106438); +#304563 = PRESENTATION_STYLE_ASSIGNMENT((#304564,#304569)); +#304564 = SURFACE_STYLE_USAGE(.BOTH.,#304565); +#304565 = SURFACE_SIDE_STYLE('',(#304566)); +#304566 = SURFACE_STYLE_FILL_AREA(#304567); +#304567 = FILL_AREA_STYLE('',(#304568)); +#304568 = FILL_AREA_STYLE_COLOUR('',#270350); +#304569 = CURVE_STYLE('',#304570,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304571 = STYLED_ITEM('color',(#304572),#106462); +#304572 = PRESENTATION_STYLE_ASSIGNMENT((#304573,#304578)); +#304573 = SURFACE_STYLE_USAGE(.BOTH.,#304574); +#304574 = SURFACE_SIDE_STYLE('',(#304575)); +#304575 = SURFACE_STYLE_FILL_AREA(#304576); +#304576 = FILL_AREA_STYLE('',(#304577)); +#304577 = FILL_AREA_STYLE_COLOUR('',#270350); +#304578 = CURVE_STYLE('',#304579,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304580 = OVER_RIDING_STYLED_ITEM('overriding color',(#304581),#106476, + #304571); +#304581 = PRESENTATION_STYLE_ASSIGNMENT((#304582,#304587)); +#304582 = SURFACE_STYLE_USAGE(.BOTH.,#304583); +#304583 = SURFACE_SIDE_STYLE('',(#304584)); +#304584 = SURFACE_STYLE_FILL_AREA(#304585); +#304585 = FILL_AREA_STYLE('',(#304586)); +#304586 = FILL_AREA_STYLE_COLOUR('',#285989); +#304587 = CURVE_STYLE('',#304588,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304589 = OVER_RIDING_STYLED_ITEM('overriding color',(#304590),#106492, + #304571); +#304590 = PRESENTATION_STYLE_ASSIGNMENT((#304591,#304596)); +#304591 = SURFACE_STYLE_USAGE(.BOTH.,#304592); +#304592 = SURFACE_SIDE_STYLE('',(#304593)); +#304593 = SURFACE_STYLE_FILL_AREA(#304594); +#304594 = FILL_AREA_STYLE('',(#304595)); +#304595 = FILL_AREA_STYLE_COLOUR('',#285989); +#304596 = CURVE_STYLE('',#304597,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304598 = STYLED_ITEM('color',(#304599),#106511); +#304599 = PRESENTATION_STYLE_ASSIGNMENT((#304600,#304605)); +#304600 = SURFACE_STYLE_USAGE(.BOTH.,#304601); +#304601 = SURFACE_SIDE_STYLE('',(#304602)); +#304602 = SURFACE_STYLE_FILL_AREA(#304603); +#304603 = FILL_AREA_STYLE('',(#304604)); +#304604 = FILL_AREA_STYLE_COLOUR('',#270350); +#304605 = CURVE_STYLE('',#304606,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304607 = STYLED_ITEM('color',(#304608),#106542); +#304608 = PRESENTATION_STYLE_ASSIGNMENT((#304609,#304614)); +#304609 = SURFACE_STYLE_USAGE(.BOTH.,#304610); +#304610 = SURFACE_SIDE_STYLE('',(#304611)); +#304611 = SURFACE_STYLE_FILL_AREA(#304612); +#304612 = FILL_AREA_STYLE('',(#304613)); +#304613 = FILL_AREA_STYLE_COLOUR('',#270350); +#304614 = CURVE_STYLE('',#304615,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304616 = OVER_RIDING_STYLED_ITEM('overriding color',(#304617),#106556, + #304607); +#304617 = PRESENTATION_STYLE_ASSIGNMENT((#304618,#304623)); +#304618 = SURFACE_STYLE_USAGE(.BOTH.,#304619); +#304619 = SURFACE_SIDE_STYLE('',(#304620)); +#304620 = SURFACE_STYLE_FILL_AREA(#304621); +#304621 = FILL_AREA_STYLE('',(#304622)); +#304622 = FILL_AREA_STYLE_COLOUR('',#285989); +#304623 = CURVE_STYLE('',#304624,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304625 = OVER_RIDING_STYLED_ITEM('overriding color',(#304626),#106572, + #304607); +#304626 = PRESENTATION_STYLE_ASSIGNMENT((#304627,#304632)); +#304627 = SURFACE_STYLE_USAGE(.BOTH.,#304628); +#304628 = SURFACE_SIDE_STYLE('',(#304629)); +#304629 = SURFACE_STYLE_FILL_AREA(#304630); +#304630 = FILL_AREA_STYLE('',(#304631)); +#304631 = FILL_AREA_STYLE_COLOUR('',#285989); +#304632 = CURVE_STYLE('',#304633,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304634 = STYLED_ITEM('color',(#304635),#106598); +#304635 = PRESENTATION_STYLE_ASSIGNMENT((#304636,#304641)); +#304636 = SURFACE_STYLE_USAGE(.BOTH.,#304637); +#304637 = SURFACE_SIDE_STYLE('',(#304638)); +#304638 = SURFACE_STYLE_FILL_AREA(#304639); +#304639 = FILL_AREA_STYLE('',(#304640)); +#304640 = FILL_AREA_STYLE_COLOUR('',#270350); +#304641 = CURVE_STYLE('',#304642,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304643 = STYLED_ITEM('color',(#304644),#106622); +#304644 = PRESENTATION_STYLE_ASSIGNMENT((#304645,#304650)); +#304645 = SURFACE_STYLE_USAGE(.BOTH.,#304646); +#304646 = SURFACE_SIDE_STYLE('',(#304647)); +#304647 = SURFACE_STYLE_FILL_AREA(#304648); +#304648 = FILL_AREA_STYLE('',(#304649)); +#304649 = FILL_AREA_STYLE_COLOUR('',#270350); +#304650 = CURVE_STYLE('',#304651,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304652 = OVER_RIDING_STYLED_ITEM('overriding color',(#304653),#106636, + #304643); +#304653 = PRESENTATION_STYLE_ASSIGNMENT((#304654,#304659)); +#304654 = SURFACE_STYLE_USAGE(.BOTH.,#304655); +#304655 = SURFACE_SIDE_STYLE('',(#304656)); +#304656 = SURFACE_STYLE_FILL_AREA(#304657); +#304657 = FILL_AREA_STYLE('',(#304658)); +#304658 = FILL_AREA_STYLE_COLOUR('',#285989); +#304659 = CURVE_STYLE('',#304660,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304661 = OVER_RIDING_STYLED_ITEM('overriding color',(#304662),#106652, + #304643); +#304662 = PRESENTATION_STYLE_ASSIGNMENT((#304663,#304668)); +#304663 = SURFACE_STYLE_USAGE(.BOTH.,#304664); +#304664 = SURFACE_SIDE_STYLE('',(#304665)); +#304665 = SURFACE_STYLE_FILL_AREA(#304666); +#304666 = FILL_AREA_STYLE('',(#304667)); +#304667 = FILL_AREA_STYLE_COLOUR('',#285989); +#304668 = CURVE_STYLE('',#304669,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304670 = STYLED_ITEM('color',(#304671),#106671); +#304671 = PRESENTATION_STYLE_ASSIGNMENT((#304672,#304677)); +#304672 = SURFACE_STYLE_USAGE(.BOTH.,#304673); +#304673 = SURFACE_SIDE_STYLE('',(#304674)); +#304674 = SURFACE_STYLE_FILL_AREA(#304675); +#304675 = FILL_AREA_STYLE('',(#304676)); +#304676 = FILL_AREA_STYLE_COLOUR('',#270350); +#304677 = CURVE_STYLE('',#304678,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304679 = STYLED_ITEM('color',(#304680),#106702); +#304680 = PRESENTATION_STYLE_ASSIGNMENT((#304681,#304686)); +#304681 = SURFACE_STYLE_USAGE(.BOTH.,#304682); +#304682 = SURFACE_SIDE_STYLE('',(#304683)); +#304683 = SURFACE_STYLE_FILL_AREA(#304684); +#304684 = FILL_AREA_STYLE('',(#304685)); +#304685 = FILL_AREA_STYLE_COLOUR('',#270350); +#304686 = CURVE_STYLE('',#304687,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304688 = OVER_RIDING_STYLED_ITEM('overriding color',(#304689),#106716, + #304679); +#304689 = PRESENTATION_STYLE_ASSIGNMENT((#304690,#304695)); +#304690 = SURFACE_STYLE_USAGE(.BOTH.,#304691); +#304691 = SURFACE_SIDE_STYLE('',(#304692)); +#304692 = SURFACE_STYLE_FILL_AREA(#304693); +#304693 = FILL_AREA_STYLE('',(#304694)); +#304694 = FILL_AREA_STYLE_COLOUR('',#285989); +#304695 = CURVE_STYLE('',#304696,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304697 = OVER_RIDING_STYLED_ITEM('overriding color',(#304698),#106732, + #304679); +#304698 = PRESENTATION_STYLE_ASSIGNMENT((#304699,#304704)); +#304699 = SURFACE_STYLE_USAGE(.BOTH.,#304700); +#304700 = SURFACE_SIDE_STYLE('',(#304701)); +#304701 = SURFACE_STYLE_FILL_AREA(#304702); +#304702 = FILL_AREA_STYLE('',(#304703)); +#304703 = FILL_AREA_STYLE_COLOUR('',#285989); +#304704 = CURVE_STYLE('',#304705,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304706 = STYLED_ITEM('color',(#304707),#106758); +#304707 = PRESENTATION_STYLE_ASSIGNMENT((#304708,#304713)); +#304708 = SURFACE_STYLE_USAGE(.BOTH.,#304709); +#304709 = SURFACE_SIDE_STYLE('',(#304710)); +#304710 = SURFACE_STYLE_FILL_AREA(#304711); +#304711 = FILL_AREA_STYLE('',(#304712)); +#304712 = FILL_AREA_STYLE_COLOUR('',#270350); +#304713 = CURVE_STYLE('',#304714,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304715 = STYLED_ITEM('color',(#304716),#106782); +#304716 = PRESENTATION_STYLE_ASSIGNMENT((#304717,#304722)); +#304717 = SURFACE_STYLE_USAGE(.BOTH.,#304718); +#304718 = SURFACE_SIDE_STYLE('',(#304719)); +#304719 = SURFACE_STYLE_FILL_AREA(#304720); +#304720 = FILL_AREA_STYLE('',(#304721)); +#304721 = FILL_AREA_STYLE_COLOUR('',#270350); +#304722 = CURVE_STYLE('',#304723,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304724 = OVER_RIDING_STYLED_ITEM('overriding color',(#304725),#106796, + #304715); +#304725 = PRESENTATION_STYLE_ASSIGNMENT((#304726,#304731)); +#304726 = SURFACE_STYLE_USAGE(.BOTH.,#304727); +#304727 = SURFACE_SIDE_STYLE('',(#304728)); +#304728 = SURFACE_STYLE_FILL_AREA(#304729); +#304729 = FILL_AREA_STYLE('',(#304730)); +#304730 = FILL_AREA_STYLE_COLOUR('',#285989); +#304731 = CURVE_STYLE('',#304732,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304733 = OVER_RIDING_STYLED_ITEM('overriding color',(#304734),#106812, + #304715); +#304734 = PRESENTATION_STYLE_ASSIGNMENT((#304735,#304740)); +#304735 = SURFACE_STYLE_USAGE(.BOTH.,#304736); +#304736 = SURFACE_SIDE_STYLE('',(#304737)); +#304737 = SURFACE_STYLE_FILL_AREA(#304738); +#304738 = FILL_AREA_STYLE('',(#304739)); +#304739 = FILL_AREA_STYLE_COLOUR('',#285989); +#304740 = CURVE_STYLE('',#304741,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304742 = STYLED_ITEM('color',(#304743),#106831); +#304743 = PRESENTATION_STYLE_ASSIGNMENT((#304744,#304749)); +#304744 = SURFACE_STYLE_USAGE(.BOTH.,#304745); +#304745 = SURFACE_SIDE_STYLE('',(#304746)); +#304746 = SURFACE_STYLE_FILL_AREA(#304747); +#304747 = FILL_AREA_STYLE('',(#304748)); +#304748 = FILL_AREA_STYLE_COLOUR('',#270350); +#304749 = CURVE_STYLE('',#304750,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304751 = STYLED_ITEM('color',(#304752),#106862); +#304752 = PRESENTATION_STYLE_ASSIGNMENT((#304753,#304758)); +#304753 = SURFACE_STYLE_USAGE(.BOTH.,#304754); +#304754 = SURFACE_SIDE_STYLE('',(#304755)); +#304755 = SURFACE_STYLE_FILL_AREA(#304756); +#304756 = FILL_AREA_STYLE('',(#304757)); +#304757 = FILL_AREA_STYLE_COLOUR('',#270350); +#304758 = CURVE_STYLE('',#304759,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304760 = OVER_RIDING_STYLED_ITEM('overriding color',(#304761),#106876, + #304751); +#304761 = PRESENTATION_STYLE_ASSIGNMENT((#304762,#304767)); +#304762 = SURFACE_STYLE_USAGE(.BOTH.,#304763); +#304763 = SURFACE_SIDE_STYLE('',(#304764)); +#304764 = SURFACE_STYLE_FILL_AREA(#304765); +#304765 = FILL_AREA_STYLE('',(#304766)); +#304766 = FILL_AREA_STYLE_COLOUR('',#285989); +#304767 = CURVE_STYLE('',#304768,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304769 = OVER_RIDING_STYLED_ITEM('overriding color',(#304770),#106892, + #304751); +#304770 = PRESENTATION_STYLE_ASSIGNMENT((#304771,#304776)); +#304771 = SURFACE_STYLE_USAGE(.BOTH.,#304772); +#304772 = SURFACE_SIDE_STYLE('',(#304773)); +#304773 = SURFACE_STYLE_FILL_AREA(#304774); +#304774 = FILL_AREA_STYLE('',(#304775)); +#304775 = FILL_AREA_STYLE_COLOUR('',#285989); +#304776 = CURVE_STYLE('',#304777,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304778 = STYLED_ITEM('color',(#304779),#106918); +#304779 = PRESENTATION_STYLE_ASSIGNMENT((#304780,#304785)); +#304780 = SURFACE_STYLE_USAGE(.BOTH.,#304781); +#304781 = SURFACE_SIDE_STYLE('',(#304782)); +#304782 = SURFACE_STYLE_FILL_AREA(#304783); +#304783 = FILL_AREA_STYLE('',(#304784)); +#304784 = FILL_AREA_STYLE_COLOUR('',#270350); +#304785 = CURVE_STYLE('',#304786,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304787 = STYLED_ITEM('color',(#304788),#106942); +#304788 = PRESENTATION_STYLE_ASSIGNMENT((#304789,#304794)); +#304789 = SURFACE_STYLE_USAGE(.BOTH.,#304790); +#304790 = SURFACE_SIDE_STYLE('',(#304791)); +#304791 = SURFACE_STYLE_FILL_AREA(#304792); +#304792 = FILL_AREA_STYLE('',(#304793)); +#304793 = FILL_AREA_STYLE_COLOUR('',#270350); +#304794 = CURVE_STYLE('',#304795,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304796 = OVER_RIDING_STYLED_ITEM('overriding color',(#304797),#106956, + #304787); +#304797 = PRESENTATION_STYLE_ASSIGNMENT((#304798,#304803)); +#304798 = SURFACE_STYLE_USAGE(.BOTH.,#304799); +#304799 = SURFACE_SIDE_STYLE('',(#304800)); +#304800 = SURFACE_STYLE_FILL_AREA(#304801); +#304801 = FILL_AREA_STYLE('',(#304802)); +#304802 = FILL_AREA_STYLE_COLOUR('',#285989); +#304803 = CURVE_STYLE('',#304804,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304805 = OVER_RIDING_STYLED_ITEM('overriding color',(#304806),#106972, + #304787); +#304806 = PRESENTATION_STYLE_ASSIGNMENT((#304807,#304812)); +#304807 = SURFACE_STYLE_USAGE(.BOTH.,#304808); +#304808 = SURFACE_SIDE_STYLE('',(#304809)); +#304809 = SURFACE_STYLE_FILL_AREA(#304810); +#304810 = FILL_AREA_STYLE('',(#304811)); +#304811 = FILL_AREA_STYLE_COLOUR('',#285989); +#304812 = CURVE_STYLE('',#304813,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304814 = STYLED_ITEM('color',(#304815),#106991); +#304815 = PRESENTATION_STYLE_ASSIGNMENT((#304816,#304821)); +#304816 = SURFACE_STYLE_USAGE(.BOTH.,#304817); +#304817 = SURFACE_SIDE_STYLE('',(#304818)); +#304818 = SURFACE_STYLE_FILL_AREA(#304819); +#304819 = FILL_AREA_STYLE('',(#304820)); +#304820 = FILL_AREA_STYLE_COLOUR('',#270350); +#304821 = CURVE_STYLE('',#304822,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304823 = STYLED_ITEM('color',(#304824),#107022); +#304824 = PRESENTATION_STYLE_ASSIGNMENT((#304825,#304830)); +#304825 = SURFACE_STYLE_USAGE(.BOTH.,#304826); +#304826 = SURFACE_SIDE_STYLE('',(#304827)); +#304827 = SURFACE_STYLE_FILL_AREA(#304828); +#304828 = FILL_AREA_STYLE('',(#304829)); +#304829 = FILL_AREA_STYLE_COLOUR('',#270350); +#304830 = CURVE_STYLE('',#304831,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304832 = OVER_RIDING_STYLED_ITEM('overriding color',(#304833),#107036, + #304823); +#304833 = PRESENTATION_STYLE_ASSIGNMENT((#304834,#304839)); +#304834 = SURFACE_STYLE_USAGE(.BOTH.,#304835); +#304835 = SURFACE_SIDE_STYLE('',(#304836)); +#304836 = SURFACE_STYLE_FILL_AREA(#304837); +#304837 = FILL_AREA_STYLE('',(#304838)); +#304838 = FILL_AREA_STYLE_COLOUR('',#285989); +#304839 = CURVE_STYLE('',#304840,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304841 = OVER_RIDING_STYLED_ITEM('overriding color',(#304842),#107052, + #304823); +#304842 = PRESENTATION_STYLE_ASSIGNMENT((#304843,#304848)); +#304843 = SURFACE_STYLE_USAGE(.BOTH.,#304844); +#304844 = SURFACE_SIDE_STYLE('',(#304845)); +#304845 = SURFACE_STYLE_FILL_AREA(#304846); +#304846 = FILL_AREA_STYLE('',(#304847)); +#304847 = FILL_AREA_STYLE_COLOUR('',#285989); +#304848 = CURVE_STYLE('',#304849,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304850 = STYLED_ITEM('color',(#304851),#107078); +#304851 = PRESENTATION_STYLE_ASSIGNMENT((#304852,#304857)); +#304852 = SURFACE_STYLE_USAGE(.BOTH.,#304853); +#304853 = SURFACE_SIDE_STYLE('',(#304854)); +#304854 = SURFACE_STYLE_FILL_AREA(#304855); +#304855 = FILL_AREA_STYLE('',(#304856)); +#304856 = FILL_AREA_STYLE_COLOUR('',#270350); +#304857 = CURVE_STYLE('',#304858,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304859 = STYLED_ITEM('color',(#304860),#107102); +#304860 = PRESENTATION_STYLE_ASSIGNMENT((#304861,#304866)); +#304861 = SURFACE_STYLE_USAGE(.BOTH.,#304862); +#304862 = SURFACE_SIDE_STYLE('',(#304863)); +#304863 = SURFACE_STYLE_FILL_AREA(#304864); +#304864 = FILL_AREA_STYLE('',(#304865)); +#304865 = FILL_AREA_STYLE_COLOUR('',#270350); +#304866 = CURVE_STYLE('',#304867,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304868 = OVER_RIDING_STYLED_ITEM('overriding color',(#304869),#107116, + #304859); +#304869 = PRESENTATION_STYLE_ASSIGNMENT((#304870,#304875)); +#304870 = SURFACE_STYLE_USAGE(.BOTH.,#304871); +#304871 = SURFACE_SIDE_STYLE('',(#304872)); +#304872 = SURFACE_STYLE_FILL_AREA(#304873); +#304873 = FILL_AREA_STYLE('',(#304874)); +#304874 = FILL_AREA_STYLE_COLOUR('',#285989); +#304875 = CURVE_STYLE('',#304876,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304877 = OVER_RIDING_STYLED_ITEM('overriding color',(#304878),#107132, + #304859); +#304878 = PRESENTATION_STYLE_ASSIGNMENT((#304879,#304884)); +#304879 = SURFACE_STYLE_USAGE(.BOTH.,#304880); +#304880 = SURFACE_SIDE_STYLE('',(#304881)); +#304881 = SURFACE_STYLE_FILL_AREA(#304882); +#304882 = FILL_AREA_STYLE('',(#304883)); +#304883 = FILL_AREA_STYLE_COLOUR('',#285989); +#304884 = CURVE_STYLE('',#304885,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304886 = STYLED_ITEM('color',(#304887),#107151); +#304887 = PRESENTATION_STYLE_ASSIGNMENT((#304888,#304893)); +#304888 = SURFACE_STYLE_USAGE(.BOTH.,#304889); +#304889 = SURFACE_SIDE_STYLE('',(#304890)); +#304890 = SURFACE_STYLE_FILL_AREA(#304891); +#304891 = FILL_AREA_STYLE('',(#304892)); +#304892 = FILL_AREA_STYLE_COLOUR('',#270350); +#304893 = CURVE_STYLE('',#304894,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304895 = STYLED_ITEM('color',(#304896),#107182); +#304896 = PRESENTATION_STYLE_ASSIGNMENT((#304897,#304902)); +#304897 = SURFACE_STYLE_USAGE(.BOTH.,#304898); +#304898 = SURFACE_SIDE_STYLE('',(#304899)); +#304899 = SURFACE_STYLE_FILL_AREA(#304900); +#304900 = FILL_AREA_STYLE('',(#304901)); +#304901 = FILL_AREA_STYLE_COLOUR('',#270350); +#304902 = CURVE_STYLE('',#304903,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304904 = OVER_RIDING_STYLED_ITEM('overriding color',(#304905),#107196, + #304895); +#304905 = PRESENTATION_STYLE_ASSIGNMENT((#304906,#304911)); +#304906 = SURFACE_STYLE_USAGE(.BOTH.,#304907); +#304907 = SURFACE_SIDE_STYLE('',(#304908)); +#304908 = SURFACE_STYLE_FILL_AREA(#304909); +#304909 = FILL_AREA_STYLE('',(#304910)); +#304910 = FILL_AREA_STYLE_COLOUR('',#285989); +#304911 = CURVE_STYLE('',#304912,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304913 = OVER_RIDING_STYLED_ITEM('overriding color',(#304914),#107212, + #304895); +#304914 = PRESENTATION_STYLE_ASSIGNMENT((#304915,#304920)); +#304915 = SURFACE_STYLE_USAGE(.BOTH.,#304916); +#304916 = SURFACE_SIDE_STYLE('',(#304917)); +#304917 = SURFACE_STYLE_FILL_AREA(#304918); +#304918 = FILL_AREA_STYLE('',(#304919)); +#304919 = FILL_AREA_STYLE_COLOUR('',#285989); +#304920 = CURVE_STYLE('',#304921,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304922 = STYLED_ITEM('color',(#304923),#107238); +#304923 = PRESENTATION_STYLE_ASSIGNMENT((#304924,#304929)); +#304924 = SURFACE_STYLE_USAGE(.BOTH.,#304925); +#304925 = SURFACE_SIDE_STYLE('',(#304926)); +#304926 = SURFACE_STYLE_FILL_AREA(#304927); +#304927 = FILL_AREA_STYLE('',(#304928)); +#304928 = FILL_AREA_STYLE_COLOUR('',#270350); +#304929 = CURVE_STYLE('',#304930,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304931 = STYLED_ITEM('color',(#304932),#107262); +#304932 = PRESENTATION_STYLE_ASSIGNMENT((#304933,#304938)); +#304933 = SURFACE_STYLE_USAGE(.BOTH.,#304934); +#304934 = SURFACE_SIDE_STYLE('',(#304935)); +#304935 = SURFACE_STYLE_FILL_AREA(#304936); +#304936 = FILL_AREA_STYLE('',(#304937)); +#304937 = FILL_AREA_STYLE_COLOUR('',#270350); +#304938 = CURVE_STYLE('',#304939,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304940 = OVER_RIDING_STYLED_ITEM('overriding color',(#304941),#107276, + #304931); +#304941 = PRESENTATION_STYLE_ASSIGNMENT((#304942,#304947)); +#304942 = SURFACE_STYLE_USAGE(.BOTH.,#304943); +#304943 = SURFACE_SIDE_STYLE('',(#304944)); +#304944 = SURFACE_STYLE_FILL_AREA(#304945); +#304945 = FILL_AREA_STYLE('',(#304946)); +#304946 = FILL_AREA_STYLE_COLOUR('',#285989); +#304947 = CURVE_STYLE('',#304948,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304949 = OVER_RIDING_STYLED_ITEM('overriding color',(#304950),#107292, + #304931); +#304950 = PRESENTATION_STYLE_ASSIGNMENT((#304951,#304956)); +#304951 = SURFACE_STYLE_USAGE(.BOTH.,#304952); +#304952 = SURFACE_SIDE_STYLE('',(#304953)); +#304953 = SURFACE_STYLE_FILL_AREA(#304954); +#304954 = FILL_AREA_STYLE('',(#304955)); +#304955 = FILL_AREA_STYLE_COLOUR('',#285989); +#304956 = CURVE_STYLE('',#304957,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304958 = STYLED_ITEM('color',(#304959),#107311); +#304959 = PRESENTATION_STYLE_ASSIGNMENT((#304960,#304965)); +#304960 = SURFACE_STYLE_USAGE(.BOTH.,#304961); +#304961 = SURFACE_SIDE_STYLE('',(#304962)); +#304962 = SURFACE_STYLE_FILL_AREA(#304963); +#304963 = FILL_AREA_STYLE('',(#304964)); +#304964 = FILL_AREA_STYLE_COLOUR('',#270350); +#304965 = CURVE_STYLE('',#304966,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304967 = STYLED_ITEM('color',(#304968),#107342); +#304968 = PRESENTATION_STYLE_ASSIGNMENT((#304969,#304974)); +#304969 = SURFACE_STYLE_USAGE(.BOTH.,#304970); +#304970 = SURFACE_SIDE_STYLE('',(#304971)); +#304971 = SURFACE_STYLE_FILL_AREA(#304972); +#304972 = FILL_AREA_STYLE('',(#304973)); +#304973 = FILL_AREA_STYLE_COLOUR('',#270350); +#304974 = CURVE_STYLE('',#304975,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#304975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304976 = OVER_RIDING_STYLED_ITEM('overriding color',(#304977),#107356, + #304967); +#304977 = PRESENTATION_STYLE_ASSIGNMENT((#304978,#304983)); +#304978 = SURFACE_STYLE_USAGE(.BOTH.,#304979); +#304979 = SURFACE_SIDE_STYLE('',(#304980)); +#304980 = SURFACE_STYLE_FILL_AREA(#304981); +#304981 = FILL_AREA_STYLE('',(#304982)); +#304982 = FILL_AREA_STYLE_COLOUR('',#285989); +#304983 = CURVE_STYLE('',#304984,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304985 = OVER_RIDING_STYLED_ITEM('overriding color',(#304986),#107372, + #304967); +#304986 = PRESENTATION_STYLE_ASSIGNMENT((#304987,#304992)); +#304987 = SURFACE_STYLE_USAGE(.BOTH.,#304988); +#304988 = SURFACE_SIDE_STYLE('',(#304989)); +#304989 = SURFACE_STYLE_FILL_AREA(#304990); +#304990 = FILL_AREA_STYLE('',(#304991)); +#304991 = FILL_AREA_STYLE_COLOUR('',#285989); +#304992 = CURVE_STYLE('',#304993,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#304993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#304994 = STYLED_ITEM('color',(#304995),#107398); +#304995 = PRESENTATION_STYLE_ASSIGNMENT((#304996,#305001)); +#304996 = SURFACE_STYLE_USAGE(.BOTH.,#304997); +#304997 = SURFACE_SIDE_STYLE('',(#304998)); +#304998 = SURFACE_STYLE_FILL_AREA(#304999); +#304999 = FILL_AREA_STYLE('',(#305000)); +#305000 = FILL_AREA_STYLE_COLOUR('',#270350); +#305001 = CURVE_STYLE('',#305002,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305003 = STYLED_ITEM('color',(#305004),#107422); +#305004 = PRESENTATION_STYLE_ASSIGNMENT((#305005,#305010)); +#305005 = SURFACE_STYLE_USAGE(.BOTH.,#305006); +#305006 = SURFACE_SIDE_STYLE('',(#305007)); +#305007 = SURFACE_STYLE_FILL_AREA(#305008); +#305008 = FILL_AREA_STYLE('',(#305009)); +#305009 = FILL_AREA_STYLE_COLOUR('',#270350); +#305010 = CURVE_STYLE('',#305011,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305012 = OVER_RIDING_STYLED_ITEM('overriding color',(#305013),#107436, + #305003); +#305013 = PRESENTATION_STYLE_ASSIGNMENT((#305014,#305019)); +#305014 = SURFACE_STYLE_USAGE(.BOTH.,#305015); +#305015 = SURFACE_SIDE_STYLE('',(#305016)); +#305016 = SURFACE_STYLE_FILL_AREA(#305017); +#305017 = FILL_AREA_STYLE('',(#305018)); +#305018 = FILL_AREA_STYLE_COLOUR('',#285989); +#305019 = CURVE_STYLE('',#305020,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305021 = OVER_RIDING_STYLED_ITEM('overriding color',(#305022),#107452, + #305003); +#305022 = PRESENTATION_STYLE_ASSIGNMENT((#305023,#305028)); +#305023 = SURFACE_STYLE_USAGE(.BOTH.,#305024); +#305024 = SURFACE_SIDE_STYLE('',(#305025)); +#305025 = SURFACE_STYLE_FILL_AREA(#305026); +#305026 = FILL_AREA_STYLE('',(#305027)); +#305027 = FILL_AREA_STYLE_COLOUR('',#285989); +#305028 = CURVE_STYLE('',#305029,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305030 = STYLED_ITEM('color',(#305031),#107471); +#305031 = PRESENTATION_STYLE_ASSIGNMENT((#305032,#305037)); +#305032 = SURFACE_STYLE_USAGE(.BOTH.,#305033); +#305033 = SURFACE_SIDE_STYLE('',(#305034)); +#305034 = SURFACE_STYLE_FILL_AREA(#305035); +#305035 = FILL_AREA_STYLE('',(#305036)); +#305036 = FILL_AREA_STYLE_COLOUR('',#270350); +#305037 = CURVE_STYLE('',#305038,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305039 = STYLED_ITEM('color',(#305040),#107502); +#305040 = PRESENTATION_STYLE_ASSIGNMENT((#305041,#305046)); +#305041 = SURFACE_STYLE_USAGE(.BOTH.,#305042); +#305042 = SURFACE_SIDE_STYLE('',(#305043)); +#305043 = SURFACE_STYLE_FILL_AREA(#305044); +#305044 = FILL_AREA_STYLE('',(#305045)); +#305045 = FILL_AREA_STYLE_COLOUR('',#270350); +#305046 = CURVE_STYLE('',#305047,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305048 = OVER_RIDING_STYLED_ITEM('overriding color',(#305049),#107516, + #305039); +#305049 = PRESENTATION_STYLE_ASSIGNMENT((#305050,#305055)); +#305050 = SURFACE_STYLE_USAGE(.BOTH.,#305051); +#305051 = SURFACE_SIDE_STYLE('',(#305052)); +#305052 = SURFACE_STYLE_FILL_AREA(#305053); +#305053 = FILL_AREA_STYLE('',(#305054)); +#305054 = FILL_AREA_STYLE_COLOUR('',#285989); +#305055 = CURVE_STYLE('',#305056,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305057 = OVER_RIDING_STYLED_ITEM('overriding color',(#305058),#107532, + #305039); +#305058 = PRESENTATION_STYLE_ASSIGNMENT((#305059,#305064)); +#305059 = SURFACE_STYLE_USAGE(.BOTH.,#305060); +#305060 = SURFACE_SIDE_STYLE('',(#305061)); +#305061 = SURFACE_STYLE_FILL_AREA(#305062); +#305062 = FILL_AREA_STYLE('',(#305063)); +#305063 = FILL_AREA_STYLE_COLOUR('',#285989); +#305064 = CURVE_STYLE('',#305065,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305066 = STYLED_ITEM('color',(#305067),#107558); +#305067 = PRESENTATION_STYLE_ASSIGNMENT((#305068,#305073)); +#305068 = SURFACE_STYLE_USAGE(.BOTH.,#305069); +#305069 = SURFACE_SIDE_STYLE('',(#305070)); +#305070 = SURFACE_STYLE_FILL_AREA(#305071); +#305071 = FILL_AREA_STYLE('',(#305072)); +#305072 = FILL_AREA_STYLE_COLOUR('',#270350); +#305073 = CURVE_STYLE('',#305074,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305075 = STYLED_ITEM('color',(#305076),#107582); +#305076 = PRESENTATION_STYLE_ASSIGNMENT((#305077,#305082)); +#305077 = SURFACE_STYLE_USAGE(.BOTH.,#305078); +#305078 = SURFACE_SIDE_STYLE('',(#305079)); +#305079 = SURFACE_STYLE_FILL_AREA(#305080); +#305080 = FILL_AREA_STYLE('',(#305081)); +#305081 = FILL_AREA_STYLE_COLOUR('',#270350); +#305082 = CURVE_STYLE('',#305083,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305084 = OVER_RIDING_STYLED_ITEM('overriding color',(#305085),#107596, + #305075); +#305085 = PRESENTATION_STYLE_ASSIGNMENT((#305086,#305091)); +#305086 = SURFACE_STYLE_USAGE(.BOTH.,#305087); +#305087 = SURFACE_SIDE_STYLE('',(#305088)); +#305088 = SURFACE_STYLE_FILL_AREA(#305089); +#305089 = FILL_AREA_STYLE('',(#305090)); +#305090 = FILL_AREA_STYLE_COLOUR('',#285989); +#305091 = CURVE_STYLE('',#305092,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305093 = OVER_RIDING_STYLED_ITEM('overriding color',(#305094),#107612, + #305075); +#305094 = PRESENTATION_STYLE_ASSIGNMENT((#305095,#305100)); +#305095 = SURFACE_STYLE_USAGE(.BOTH.,#305096); +#305096 = SURFACE_SIDE_STYLE('',(#305097)); +#305097 = SURFACE_STYLE_FILL_AREA(#305098); +#305098 = FILL_AREA_STYLE('',(#305099)); +#305099 = FILL_AREA_STYLE_COLOUR('',#285989); +#305100 = CURVE_STYLE('',#305101,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305102 = STYLED_ITEM('color',(#305103),#107631); +#305103 = PRESENTATION_STYLE_ASSIGNMENT((#305104,#305109)); +#305104 = SURFACE_STYLE_USAGE(.BOTH.,#305105); +#305105 = SURFACE_SIDE_STYLE('',(#305106)); +#305106 = SURFACE_STYLE_FILL_AREA(#305107); +#305107 = FILL_AREA_STYLE('',(#305108)); +#305108 = FILL_AREA_STYLE_COLOUR('',#285989); +#305109 = CURVE_STYLE('',#305110,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305111 = STYLED_ITEM('color',(#305112),#107648); +#305112 = PRESENTATION_STYLE_ASSIGNMENT((#305113,#305118)); +#305113 = SURFACE_STYLE_USAGE(.BOTH.,#305114); +#305114 = SURFACE_SIDE_STYLE('',(#305115)); +#305115 = SURFACE_STYLE_FILL_AREA(#305116); +#305116 = FILL_AREA_STYLE('',(#305117)); +#305117 = FILL_AREA_STYLE_COLOUR('',#285989); +#305118 = CURVE_STYLE('',#305119,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305120 = STYLED_ITEM('color',(#305121),#107665); +#305121 = PRESENTATION_STYLE_ASSIGNMENT((#305122,#305127)); +#305122 = SURFACE_STYLE_USAGE(.BOTH.,#305123); +#305123 = SURFACE_SIDE_STYLE('',(#305124)); +#305124 = SURFACE_STYLE_FILL_AREA(#305125); +#305125 = FILL_AREA_STYLE('',(#305126)); +#305126 = FILL_AREA_STYLE_COLOUR('',#285989); +#305127 = CURVE_STYLE('',#305128,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305129 = STYLED_ITEM('color',(#305130),#107682); +#305130 = PRESENTATION_STYLE_ASSIGNMENT((#305131,#305136)); +#305131 = SURFACE_STYLE_USAGE(.BOTH.,#305132); +#305132 = SURFACE_SIDE_STYLE('',(#305133)); +#305133 = SURFACE_STYLE_FILL_AREA(#305134); +#305134 = FILL_AREA_STYLE('',(#305135)); +#305135 = FILL_AREA_STYLE_COLOUR('',#285989); +#305136 = CURVE_STYLE('',#305137,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305138 = STYLED_ITEM('color',(#305139),#107699); +#305139 = PRESENTATION_STYLE_ASSIGNMENT((#305140,#305145)); +#305140 = SURFACE_STYLE_USAGE(.BOTH.,#305141); +#305141 = SURFACE_SIDE_STYLE('',(#305142)); +#305142 = SURFACE_STYLE_FILL_AREA(#305143); +#305143 = FILL_AREA_STYLE('',(#305144)); +#305144 = FILL_AREA_STYLE_COLOUR('',#285989); +#305145 = CURVE_STYLE('',#305146,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305147 = STYLED_ITEM('color',(#305148),#107711); +#305148 = PRESENTATION_STYLE_ASSIGNMENT((#305149,#305154)); +#305149 = SURFACE_STYLE_USAGE(.BOTH.,#305150); +#305150 = SURFACE_SIDE_STYLE('',(#305151)); +#305151 = SURFACE_STYLE_FILL_AREA(#305152); +#305152 = FILL_AREA_STYLE('',(#305153)); +#305153 = FILL_AREA_STYLE_COLOUR('',#285989); +#305154 = CURVE_STYLE('',#305155,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305156 = STYLED_ITEM('color',(#305157),#107728); +#305157 = PRESENTATION_STYLE_ASSIGNMENT((#305158,#305163)); +#305158 = SURFACE_STYLE_USAGE(.BOTH.,#305159); +#305159 = SURFACE_SIDE_STYLE('',(#305160)); +#305160 = SURFACE_STYLE_FILL_AREA(#305161); +#305161 = FILL_AREA_STYLE('',(#305162)); +#305162 = FILL_AREA_STYLE_COLOUR('',#285989); +#305163 = CURVE_STYLE('',#305164,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305165 = STYLED_ITEM('color',(#305166),#107745); +#305166 = PRESENTATION_STYLE_ASSIGNMENT((#305167,#305172)); +#305167 = SURFACE_STYLE_USAGE(.BOTH.,#305168); +#305168 = SURFACE_SIDE_STYLE('',(#305169)); +#305169 = SURFACE_STYLE_FILL_AREA(#305170); +#305170 = FILL_AREA_STYLE('',(#305171)); +#305171 = FILL_AREA_STYLE_COLOUR('',#285989); +#305172 = CURVE_STYLE('',#305173,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305174 = STYLED_ITEM('color',(#305175),#107762); +#305175 = PRESENTATION_STYLE_ASSIGNMENT((#305176,#305181)); +#305176 = SURFACE_STYLE_USAGE(.BOTH.,#305177); +#305177 = SURFACE_SIDE_STYLE('',(#305178)); +#305178 = SURFACE_STYLE_FILL_AREA(#305179); +#305179 = FILL_AREA_STYLE('',(#305180)); +#305180 = FILL_AREA_STYLE_COLOUR('',#285989); +#305181 = CURVE_STYLE('',#305182,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305183 = STYLED_ITEM('color',(#305184),#107779); +#305184 = PRESENTATION_STYLE_ASSIGNMENT((#305185,#305190)); +#305185 = SURFACE_STYLE_USAGE(.BOTH.,#305186); +#305186 = SURFACE_SIDE_STYLE('',(#305187)); +#305187 = SURFACE_STYLE_FILL_AREA(#305188); +#305188 = FILL_AREA_STYLE('',(#305189)); +#305189 = FILL_AREA_STYLE_COLOUR('',#285989); +#305190 = CURVE_STYLE('',#305191,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305192 = STYLED_ITEM('color',(#305193),#107791); +#305193 = PRESENTATION_STYLE_ASSIGNMENT((#305194,#305199)); +#305194 = SURFACE_STYLE_USAGE(.BOTH.,#305195); +#305195 = SURFACE_SIDE_STYLE('',(#305196)); +#305196 = SURFACE_STYLE_FILL_AREA(#305197); +#305197 = FILL_AREA_STYLE('',(#305198)); +#305198 = FILL_AREA_STYLE_COLOUR('',#285989); +#305199 = CURVE_STYLE('',#305200,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305201 = STYLED_ITEM('color',(#305202),#107808); +#305202 = PRESENTATION_STYLE_ASSIGNMENT((#305203,#305208)); +#305203 = SURFACE_STYLE_USAGE(.BOTH.,#305204); +#305204 = SURFACE_SIDE_STYLE('',(#305205)); +#305205 = SURFACE_STYLE_FILL_AREA(#305206); +#305206 = FILL_AREA_STYLE('',(#305207)); +#305207 = FILL_AREA_STYLE_COLOUR('',#285989); +#305208 = CURVE_STYLE('',#305209,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305210 = STYLED_ITEM('color',(#305211),#107825); +#305211 = PRESENTATION_STYLE_ASSIGNMENT((#305212,#305217)); +#305212 = SURFACE_STYLE_USAGE(.BOTH.,#305213); +#305213 = SURFACE_SIDE_STYLE('',(#305214)); +#305214 = SURFACE_STYLE_FILL_AREA(#305215); +#305215 = FILL_AREA_STYLE('',(#305216)); +#305216 = FILL_AREA_STYLE_COLOUR('',#285989); +#305217 = CURVE_STYLE('',#305218,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305219 = STYLED_ITEM('color',(#305220),#107842); +#305220 = PRESENTATION_STYLE_ASSIGNMENT((#305221,#305226)); +#305221 = SURFACE_STYLE_USAGE(.BOTH.,#305222); +#305222 = SURFACE_SIDE_STYLE('',(#305223)); +#305223 = SURFACE_STYLE_FILL_AREA(#305224); +#305224 = FILL_AREA_STYLE('',(#305225)); +#305225 = FILL_AREA_STYLE_COLOUR('',#285989); +#305226 = CURVE_STYLE('',#305227,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305228 = STYLED_ITEM('color',(#305229),#107859); +#305229 = PRESENTATION_STYLE_ASSIGNMENT((#305230,#305235)); +#305230 = SURFACE_STYLE_USAGE(.BOTH.,#305231); +#305231 = SURFACE_SIDE_STYLE('',(#305232)); +#305232 = SURFACE_STYLE_FILL_AREA(#305233); +#305233 = FILL_AREA_STYLE('',(#305234)); +#305234 = FILL_AREA_STYLE_COLOUR('',#285989); +#305235 = CURVE_STYLE('',#305236,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305237 = STYLED_ITEM('color',(#305238),#107871); +#305238 = PRESENTATION_STYLE_ASSIGNMENT((#305239,#305244)); +#305239 = SURFACE_STYLE_USAGE(.BOTH.,#305240); +#305240 = SURFACE_SIDE_STYLE('',(#305241)); +#305241 = SURFACE_STYLE_FILL_AREA(#305242); +#305242 = FILL_AREA_STYLE('',(#305243)); +#305243 = FILL_AREA_STYLE_COLOUR('',#285989); +#305244 = CURVE_STYLE('',#305245,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305246 = STYLED_ITEM('color',(#305247),#107888); +#305247 = PRESENTATION_STYLE_ASSIGNMENT((#305248,#305253)); +#305248 = SURFACE_STYLE_USAGE(.BOTH.,#305249); +#305249 = SURFACE_SIDE_STYLE('',(#305250)); +#305250 = SURFACE_STYLE_FILL_AREA(#305251); +#305251 = FILL_AREA_STYLE('',(#305252)); +#305252 = FILL_AREA_STYLE_COLOUR('',#285989); +#305253 = CURVE_STYLE('',#305254,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305255 = STYLED_ITEM('color',(#305256),#107905); +#305256 = PRESENTATION_STYLE_ASSIGNMENT((#305257,#305262)); +#305257 = SURFACE_STYLE_USAGE(.BOTH.,#305258); +#305258 = SURFACE_SIDE_STYLE('',(#305259)); +#305259 = SURFACE_STYLE_FILL_AREA(#305260); +#305260 = FILL_AREA_STYLE('',(#305261)); +#305261 = FILL_AREA_STYLE_COLOUR('',#285989); +#305262 = CURVE_STYLE('',#305263,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305264 = STYLED_ITEM('color',(#305265),#107922); +#305265 = PRESENTATION_STYLE_ASSIGNMENT((#305266,#305271)); +#305266 = SURFACE_STYLE_USAGE(.BOTH.,#305267); +#305267 = SURFACE_SIDE_STYLE('',(#305268)); +#305268 = SURFACE_STYLE_FILL_AREA(#305269); +#305269 = FILL_AREA_STYLE('',(#305270)); +#305270 = FILL_AREA_STYLE_COLOUR('',#285989); +#305271 = CURVE_STYLE('',#305272,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305273 = STYLED_ITEM('color',(#305274),#107939); +#305274 = PRESENTATION_STYLE_ASSIGNMENT((#305275,#305280)); +#305275 = SURFACE_STYLE_USAGE(.BOTH.,#305276); +#305276 = SURFACE_SIDE_STYLE('',(#305277)); +#305277 = SURFACE_STYLE_FILL_AREA(#305278); +#305278 = FILL_AREA_STYLE('',(#305279)); +#305279 = FILL_AREA_STYLE_COLOUR('',#285989); +#305280 = CURVE_STYLE('',#305281,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305282 = STYLED_ITEM('color',(#305283),#107951); +#305283 = PRESENTATION_STYLE_ASSIGNMENT((#305284,#305289)); +#305284 = SURFACE_STYLE_USAGE(.BOTH.,#305285); +#305285 = SURFACE_SIDE_STYLE('',(#305286)); +#305286 = SURFACE_STYLE_FILL_AREA(#305287); +#305287 = FILL_AREA_STYLE('',(#305288)); +#305288 = FILL_AREA_STYLE_COLOUR('',#285989); +#305289 = CURVE_STYLE('',#305290,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305291 = STYLED_ITEM('color',(#305292),#107968); +#305292 = PRESENTATION_STYLE_ASSIGNMENT((#305293,#305298)); +#305293 = SURFACE_STYLE_USAGE(.BOTH.,#305294); +#305294 = SURFACE_SIDE_STYLE('',(#305295)); +#305295 = SURFACE_STYLE_FILL_AREA(#305296); +#305296 = FILL_AREA_STYLE('',(#305297)); +#305297 = FILL_AREA_STYLE_COLOUR('',#285989); +#305298 = CURVE_STYLE('',#305299,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305300 = STYLED_ITEM('color',(#305301),#107985); +#305301 = PRESENTATION_STYLE_ASSIGNMENT((#305302,#305307)); +#305302 = SURFACE_STYLE_USAGE(.BOTH.,#305303); +#305303 = SURFACE_SIDE_STYLE('',(#305304)); +#305304 = SURFACE_STYLE_FILL_AREA(#305305); +#305305 = FILL_AREA_STYLE('',(#305306)); +#305306 = FILL_AREA_STYLE_COLOUR('',#285989); +#305307 = CURVE_STYLE('',#305308,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305309 = STYLED_ITEM('color',(#305310),#108002); +#305310 = PRESENTATION_STYLE_ASSIGNMENT((#305311,#305316)); +#305311 = SURFACE_STYLE_USAGE(.BOTH.,#305312); +#305312 = SURFACE_SIDE_STYLE('',(#305313)); +#305313 = SURFACE_STYLE_FILL_AREA(#305314); +#305314 = FILL_AREA_STYLE('',(#305315)); +#305315 = FILL_AREA_STYLE_COLOUR('',#285989); +#305316 = CURVE_STYLE('',#305317,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305318 = STYLED_ITEM('color',(#305319),#108019); +#305319 = PRESENTATION_STYLE_ASSIGNMENT((#305320,#305325)); +#305320 = SURFACE_STYLE_USAGE(.BOTH.,#305321); +#305321 = SURFACE_SIDE_STYLE('',(#305322)); +#305322 = SURFACE_STYLE_FILL_AREA(#305323); +#305323 = FILL_AREA_STYLE('',(#305324)); +#305324 = FILL_AREA_STYLE_COLOUR('',#285989); +#305325 = CURVE_STYLE('',#305326,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305327 = STYLED_ITEM('color',(#305328),#108031); +#305328 = PRESENTATION_STYLE_ASSIGNMENT((#305329,#305334)); +#305329 = SURFACE_STYLE_USAGE(.BOTH.,#305330); +#305330 = SURFACE_SIDE_STYLE('',(#305331)); +#305331 = SURFACE_STYLE_FILL_AREA(#305332); +#305332 = FILL_AREA_STYLE('',(#305333)); +#305333 = FILL_AREA_STYLE_COLOUR('',#285989); +#305334 = CURVE_STYLE('',#305335,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305336 = STYLED_ITEM('color',(#305337),#108048); +#305337 = PRESENTATION_STYLE_ASSIGNMENT((#305338,#305343)); +#305338 = SURFACE_STYLE_USAGE(.BOTH.,#305339); +#305339 = SURFACE_SIDE_STYLE('',(#305340)); +#305340 = SURFACE_STYLE_FILL_AREA(#305341); +#305341 = FILL_AREA_STYLE('',(#305342)); +#305342 = FILL_AREA_STYLE_COLOUR('',#285989); +#305343 = CURVE_STYLE('',#305344,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305345 = STYLED_ITEM('color',(#305346),#108065); +#305346 = PRESENTATION_STYLE_ASSIGNMENT((#305347,#305352)); +#305347 = SURFACE_STYLE_USAGE(.BOTH.,#305348); +#305348 = SURFACE_SIDE_STYLE('',(#305349)); +#305349 = SURFACE_STYLE_FILL_AREA(#305350); +#305350 = FILL_AREA_STYLE('',(#305351)); +#305351 = FILL_AREA_STYLE_COLOUR('',#285989); +#305352 = CURVE_STYLE('',#305353,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305354 = STYLED_ITEM('color',(#305355),#108082); +#305355 = PRESENTATION_STYLE_ASSIGNMENT((#305356,#305361)); +#305356 = SURFACE_STYLE_USAGE(.BOTH.,#305357); +#305357 = SURFACE_SIDE_STYLE('',(#305358)); +#305358 = SURFACE_STYLE_FILL_AREA(#305359); +#305359 = FILL_AREA_STYLE('',(#305360)); +#305360 = FILL_AREA_STYLE_COLOUR('',#285989); +#305361 = CURVE_STYLE('',#305362,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305363 = STYLED_ITEM('color',(#305364),#108099); +#305364 = PRESENTATION_STYLE_ASSIGNMENT((#305365,#305370)); +#305365 = SURFACE_STYLE_USAGE(.BOTH.,#305366); +#305366 = SURFACE_SIDE_STYLE('',(#305367)); +#305367 = SURFACE_STYLE_FILL_AREA(#305368); +#305368 = FILL_AREA_STYLE('',(#305369)); +#305369 = FILL_AREA_STYLE_COLOUR('',#285989); +#305370 = CURVE_STYLE('',#305371,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305372 = STYLED_ITEM('color',(#305373),#108111); +#305373 = PRESENTATION_STYLE_ASSIGNMENT((#305374,#305379)); +#305374 = SURFACE_STYLE_USAGE(.BOTH.,#305375); +#305375 = SURFACE_SIDE_STYLE('',(#305376)); +#305376 = SURFACE_STYLE_FILL_AREA(#305377); +#305377 = FILL_AREA_STYLE('',(#305378)); +#305378 = FILL_AREA_STYLE_COLOUR('',#285989); +#305379 = CURVE_STYLE('',#305380,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305381 = STYLED_ITEM('color',(#305382),#108128); +#305382 = PRESENTATION_STYLE_ASSIGNMENT((#305383,#305388)); +#305383 = SURFACE_STYLE_USAGE(.BOTH.,#305384); +#305384 = SURFACE_SIDE_STYLE('',(#305385)); +#305385 = SURFACE_STYLE_FILL_AREA(#305386); +#305386 = FILL_AREA_STYLE('',(#305387)); +#305387 = FILL_AREA_STYLE_COLOUR('',#285989); +#305388 = CURVE_STYLE('',#305389,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305390 = STYLED_ITEM('color',(#305391),#108145); +#305391 = PRESENTATION_STYLE_ASSIGNMENT((#305392,#305397)); +#305392 = SURFACE_STYLE_USAGE(.BOTH.,#305393); +#305393 = SURFACE_SIDE_STYLE('',(#305394)); +#305394 = SURFACE_STYLE_FILL_AREA(#305395); +#305395 = FILL_AREA_STYLE('',(#305396)); +#305396 = FILL_AREA_STYLE_COLOUR('',#285989); +#305397 = CURVE_STYLE('',#305398,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305399 = STYLED_ITEM('color',(#305400),#108162); +#305400 = PRESENTATION_STYLE_ASSIGNMENT((#305401,#305406)); +#305401 = SURFACE_STYLE_USAGE(.BOTH.,#305402); +#305402 = SURFACE_SIDE_STYLE('',(#305403)); +#305403 = SURFACE_STYLE_FILL_AREA(#305404); +#305404 = FILL_AREA_STYLE('',(#305405)); +#305405 = FILL_AREA_STYLE_COLOUR('',#285989); +#305406 = CURVE_STYLE('',#305407,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305408 = STYLED_ITEM('color',(#305409),#108179); +#305409 = PRESENTATION_STYLE_ASSIGNMENT((#305410,#305415)); +#305410 = SURFACE_STYLE_USAGE(.BOTH.,#305411); +#305411 = SURFACE_SIDE_STYLE('',(#305412)); +#305412 = SURFACE_STYLE_FILL_AREA(#305413); +#305413 = FILL_AREA_STYLE('',(#305414)); +#305414 = FILL_AREA_STYLE_COLOUR('',#285989); +#305415 = CURVE_STYLE('',#305416,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305417 = STYLED_ITEM('color',(#305418),#108191); +#305418 = PRESENTATION_STYLE_ASSIGNMENT((#305419,#305424)); +#305419 = SURFACE_STYLE_USAGE(.BOTH.,#305420); +#305420 = SURFACE_SIDE_STYLE('',(#305421)); +#305421 = SURFACE_STYLE_FILL_AREA(#305422); +#305422 = FILL_AREA_STYLE('',(#305423)); +#305423 = FILL_AREA_STYLE_COLOUR('',#285989); +#305424 = CURVE_STYLE('',#305425,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305426 = STYLED_ITEM('color',(#305427),#108208); +#305427 = PRESENTATION_STYLE_ASSIGNMENT((#305428,#305433)); +#305428 = SURFACE_STYLE_USAGE(.BOTH.,#305429); +#305429 = SURFACE_SIDE_STYLE('',(#305430)); +#305430 = SURFACE_STYLE_FILL_AREA(#305431); +#305431 = FILL_AREA_STYLE('',(#305432)); +#305432 = FILL_AREA_STYLE_COLOUR('',#285989); +#305433 = CURVE_STYLE('',#305434,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305435 = STYLED_ITEM('color',(#305436),#108225); +#305436 = PRESENTATION_STYLE_ASSIGNMENT((#305437,#305442)); +#305437 = SURFACE_STYLE_USAGE(.BOTH.,#305438); +#305438 = SURFACE_SIDE_STYLE('',(#305439)); +#305439 = SURFACE_STYLE_FILL_AREA(#305440); +#305440 = FILL_AREA_STYLE('',(#305441)); +#305441 = FILL_AREA_STYLE_COLOUR('',#285989); +#305442 = CURVE_STYLE('',#305443,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305444 = STYLED_ITEM('color',(#305445),#108242); +#305445 = PRESENTATION_STYLE_ASSIGNMENT((#305446,#305451)); +#305446 = SURFACE_STYLE_USAGE(.BOTH.,#305447); +#305447 = SURFACE_SIDE_STYLE('',(#305448)); +#305448 = SURFACE_STYLE_FILL_AREA(#305449); +#305449 = FILL_AREA_STYLE('',(#305450)); +#305450 = FILL_AREA_STYLE_COLOUR('',#285989); +#305451 = CURVE_STYLE('',#305452,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305453 = STYLED_ITEM('color',(#305454),#108259); +#305454 = PRESENTATION_STYLE_ASSIGNMENT((#305455,#305460)); +#305455 = SURFACE_STYLE_USAGE(.BOTH.,#305456); +#305456 = SURFACE_SIDE_STYLE('',(#305457)); +#305457 = SURFACE_STYLE_FILL_AREA(#305458); +#305458 = FILL_AREA_STYLE('',(#305459)); +#305459 = FILL_AREA_STYLE_COLOUR('',#285989); +#305460 = CURVE_STYLE('',#305461,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305462 = STYLED_ITEM('color',(#305463),#108271); +#305463 = PRESENTATION_STYLE_ASSIGNMENT((#305464,#305469)); +#305464 = SURFACE_STYLE_USAGE(.BOTH.,#305465); +#305465 = SURFACE_SIDE_STYLE('',(#305466)); +#305466 = SURFACE_STYLE_FILL_AREA(#305467); +#305467 = FILL_AREA_STYLE('',(#305468)); +#305468 = FILL_AREA_STYLE_COLOUR('',#270350); +#305469 = CURVE_STYLE('',#305470,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305471 = OVER_RIDING_STYLED_ITEM('overriding color',(#305472),#108278, + #305462); +#305472 = PRESENTATION_STYLE_ASSIGNMENT((#305473,#305478)); +#305473 = SURFACE_STYLE_USAGE(.BOTH.,#305474); +#305474 = SURFACE_SIDE_STYLE('',(#305475)); +#305475 = SURFACE_STYLE_FILL_AREA(#305476); +#305476 = FILL_AREA_STYLE('',(#305477)); +#305477 = FILL_AREA_STYLE_COLOUR('',#285989); +#305478 = CURVE_STYLE('',#305479,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305480 = STYLED_ITEM('color',(#305481),#108288); +#305481 = PRESENTATION_STYLE_ASSIGNMENT((#305482,#305487)); +#305482 = SURFACE_STYLE_USAGE(.BOTH.,#305483); +#305483 = SURFACE_SIDE_STYLE('',(#305484)); +#305484 = SURFACE_STYLE_FILL_AREA(#305485); +#305485 = FILL_AREA_STYLE('',(#305486)); +#305486 = FILL_AREA_STYLE_COLOUR('',#270350); +#305487 = CURVE_STYLE('',#305488,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305489 = OVER_RIDING_STYLED_ITEM('overriding color',(#305490),#108293, + #305480); +#305490 = PRESENTATION_STYLE_ASSIGNMENT((#305491,#305496)); +#305491 = SURFACE_STYLE_USAGE(.BOTH.,#305492); +#305492 = SURFACE_SIDE_STYLE('',(#305493)); +#305493 = SURFACE_STYLE_FILL_AREA(#305494); +#305494 = FILL_AREA_STYLE('',(#305495)); +#305495 = FILL_AREA_STYLE_COLOUR('',#285989); +#305496 = CURVE_STYLE('',#305497,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305498 = STYLED_ITEM('color',(#305499),#108305); +#305499 = PRESENTATION_STYLE_ASSIGNMENT((#305500,#305505)); +#305500 = SURFACE_STYLE_USAGE(.BOTH.,#305501); +#305501 = SURFACE_SIDE_STYLE('',(#305502)); +#305502 = SURFACE_STYLE_FILL_AREA(#305503); +#305503 = FILL_AREA_STYLE('',(#305504)); +#305504 = FILL_AREA_STYLE_COLOUR('',#285989); +#305505 = CURVE_STYLE('',#305506,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305507 = STYLED_ITEM('color',(#305508),#108354); +#305508 = PRESENTATION_STYLE_ASSIGNMENT((#305509,#305514)); +#305509 = SURFACE_STYLE_USAGE(.BOTH.,#305510); +#305510 = SURFACE_SIDE_STYLE('',(#305511)); +#305511 = SURFACE_STYLE_FILL_AREA(#305512); +#305512 = FILL_AREA_STYLE('',(#305513)); +#305513 = FILL_AREA_STYLE_COLOUR('',#285989); +#305514 = CURVE_STYLE('',#305515,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305516 = STYLED_ITEM('color',(#305517),#108378); +#305517 = PRESENTATION_STYLE_ASSIGNMENT((#305518,#305523)); +#305518 = SURFACE_STYLE_USAGE(.BOTH.,#305519); +#305519 = SURFACE_SIDE_STYLE('',(#305520)); +#305520 = SURFACE_STYLE_FILL_AREA(#305521); +#305521 = FILL_AREA_STYLE('',(#305522)); +#305522 = FILL_AREA_STYLE_COLOUR('',#285989); +#305523 = CURVE_STYLE('',#305524,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305525 = STYLED_ITEM('color',(#305526),#108420); +#305526 = PRESENTATION_STYLE_ASSIGNMENT((#305527,#305532)); +#305527 = SURFACE_STYLE_USAGE(.BOTH.,#305528); +#305528 = SURFACE_SIDE_STYLE('',(#305529)); +#305529 = SURFACE_STYLE_FILL_AREA(#305530); +#305530 = FILL_AREA_STYLE('',(#305531)); +#305531 = FILL_AREA_STYLE_COLOUR('',#285989); +#305532 = CURVE_STYLE('',#305533,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305534 = STYLED_ITEM('color',(#305535),#108437); +#305535 = PRESENTATION_STYLE_ASSIGNMENT((#305536,#305541)); +#305536 = SURFACE_STYLE_USAGE(.BOTH.,#305537); +#305537 = SURFACE_SIDE_STYLE('',(#305538)); +#305538 = SURFACE_STYLE_FILL_AREA(#305539); +#305539 = FILL_AREA_STYLE('',(#305540)); +#305540 = FILL_AREA_STYLE_COLOUR('',#270350); +#305541 = CURVE_STYLE('',#305542,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305543 = OVER_RIDING_STYLED_ITEM('overriding color',(#305544),#108444, + #305534); +#305544 = PRESENTATION_STYLE_ASSIGNMENT((#305545,#305550)); +#305545 = SURFACE_STYLE_USAGE(.BOTH.,#305546); +#305546 = SURFACE_SIDE_STYLE('',(#305547)); +#305547 = SURFACE_STYLE_FILL_AREA(#305548); +#305548 = FILL_AREA_STYLE('',(#305549)); +#305549 = FILL_AREA_STYLE_COLOUR('',#285989); +#305550 = CURVE_STYLE('',#305551,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305552 = STYLED_ITEM('color',(#305553),#108454); +#305553 = PRESENTATION_STYLE_ASSIGNMENT((#305554,#305559)); +#305554 = SURFACE_STYLE_USAGE(.BOTH.,#305555); +#305555 = SURFACE_SIDE_STYLE('',(#305556)); +#305556 = SURFACE_STYLE_FILL_AREA(#305557); +#305557 = FILL_AREA_STYLE('',(#305558)); +#305558 = FILL_AREA_STYLE_COLOUR('',#270350); +#305559 = CURVE_STYLE('',#305560,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305561 = OVER_RIDING_STYLED_ITEM('overriding color',(#305562),#108459, + #305552); +#305562 = PRESENTATION_STYLE_ASSIGNMENT((#305563,#305568)); +#305563 = SURFACE_STYLE_USAGE(.BOTH.,#305564); +#305564 = SURFACE_SIDE_STYLE('',(#305565)); +#305565 = SURFACE_STYLE_FILL_AREA(#305566); +#305566 = FILL_AREA_STYLE('',(#305567)); +#305567 = FILL_AREA_STYLE_COLOUR('',#285989); +#305568 = CURVE_STYLE('',#305569,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305570 = STYLED_ITEM('color',(#305571),#108471); +#305571 = PRESENTATION_STYLE_ASSIGNMENT((#305572,#305577)); +#305572 = SURFACE_STYLE_USAGE(.BOTH.,#305573); +#305573 = SURFACE_SIDE_STYLE('',(#305574)); +#305574 = SURFACE_STYLE_FILL_AREA(#305575); +#305575 = FILL_AREA_STYLE('',(#305576)); +#305576 = FILL_AREA_STYLE_COLOUR('',#285989); +#305577 = CURVE_STYLE('',#305578,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305579 = STYLED_ITEM('color',(#305580),#108520); +#305580 = PRESENTATION_STYLE_ASSIGNMENT((#305581,#305586)); +#305581 = SURFACE_STYLE_USAGE(.BOTH.,#305582); +#305582 = SURFACE_SIDE_STYLE('',(#305583)); +#305583 = SURFACE_STYLE_FILL_AREA(#305584); +#305584 = FILL_AREA_STYLE('',(#305585)); +#305585 = FILL_AREA_STYLE_COLOUR('',#285989); +#305586 = CURVE_STYLE('',#305587,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305588 = STYLED_ITEM('color',(#305589),#108544); +#305589 = PRESENTATION_STYLE_ASSIGNMENT((#305590,#305595)); +#305590 = SURFACE_STYLE_USAGE(.BOTH.,#305591); +#305591 = SURFACE_SIDE_STYLE('',(#305592)); +#305592 = SURFACE_STYLE_FILL_AREA(#305593); +#305593 = FILL_AREA_STYLE('',(#305594)); +#305594 = FILL_AREA_STYLE_COLOUR('',#285989); +#305595 = CURVE_STYLE('',#305596,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305597 = STYLED_ITEM('color',(#305598),#108586); +#305598 = PRESENTATION_STYLE_ASSIGNMENT((#305599,#305604)); +#305599 = SURFACE_STYLE_USAGE(.BOTH.,#305600); +#305600 = SURFACE_SIDE_STYLE('',(#305601)); +#305601 = SURFACE_STYLE_FILL_AREA(#305602); +#305602 = FILL_AREA_STYLE('',(#305603)); +#305603 = FILL_AREA_STYLE_COLOUR('',#285989); +#305604 = CURVE_STYLE('',#305605,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305606 = STYLED_ITEM('color',(#305607),#108603); +#305607 = PRESENTATION_STYLE_ASSIGNMENT((#305608,#305613)); +#305608 = SURFACE_STYLE_USAGE(.BOTH.,#305609); +#305609 = SURFACE_SIDE_STYLE('',(#305610)); +#305610 = SURFACE_STYLE_FILL_AREA(#305611); +#305611 = FILL_AREA_STYLE('',(#305612)); +#305612 = FILL_AREA_STYLE_COLOUR('',#270350); +#305613 = CURVE_STYLE('',#305614,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305615 = OVER_RIDING_STYLED_ITEM('overriding color',(#305616),#108610, + #305606); +#305616 = PRESENTATION_STYLE_ASSIGNMENT((#305617,#305622)); +#305617 = SURFACE_STYLE_USAGE(.BOTH.,#305618); +#305618 = SURFACE_SIDE_STYLE('',(#305619)); +#305619 = SURFACE_STYLE_FILL_AREA(#305620); +#305620 = FILL_AREA_STYLE('',(#305621)); +#305621 = FILL_AREA_STYLE_COLOUR('',#285989); +#305622 = CURVE_STYLE('',#305623,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305624 = STYLED_ITEM('color',(#305625),#108620); +#305625 = PRESENTATION_STYLE_ASSIGNMENT((#305626,#305631)); +#305626 = SURFACE_STYLE_USAGE(.BOTH.,#305627); +#305627 = SURFACE_SIDE_STYLE('',(#305628)); +#305628 = SURFACE_STYLE_FILL_AREA(#305629); +#305629 = FILL_AREA_STYLE('',(#305630)); +#305630 = FILL_AREA_STYLE_COLOUR('',#270350); +#305631 = CURVE_STYLE('',#305632,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305633 = OVER_RIDING_STYLED_ITEM('overriding color',(#305634),#108625, + #305624); +#305634 = PRESENTATION_STYLE_ASSIGNMENT((#305635,#305640)); +#305635 = SURFACE_STYLE_USAGE(.BOTH.,#305636); +#305636 = SURFACE_SIDE_STYLE('',(#305637)); +#305637 = SURFACE_STYLE_FILL_AREA(#305638); +#305638 = FILL_AREA_STYLE('',(#305639)); +#305639 = FILL_AREA_STYLE_COLOUR('',#285989); +#305640 = CURVE_STYLE('',#305641,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305642 = STYLED_ITEM('color',(#305643),#108637); +#305643 = PRESENTATION_STYLE_ASSIGNMENT((#305644,#305649)); +#305644 = SURFACE_STYLE_USAGE(.BOTH.,#305645); +#305645 = SURFACE_SIDE_STYLE('',(#305646)); +#305646 = SURFACE_STYLE_FILL_AREA(#305647); +#305647 = FILL_AREA_STYLE('',(#305648)); +#305648 = FILL_AREA_STYLE_COLOUR('',#285989); +#305649 = CURVE_STYLE('',#305650,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305651 = STYLED_ITEM('color',(#305652),#108686); +#305652 = PRESENTATION_STYLE_ASSIGNMENT((#305653,#305658)); +#305653 = SURFACE_STYLE_USAGE(.BOTH.,#305654); +#305654 = SURFACE_SIDE_STYLE('',(#305655)); +#305655 = SURFACE_STYLE_FILL_AREA(#305656); +#305656 = FILL_AREA_STYLE('',(#305657)); +#305657 = FILL_AREA_STYLE_COLOUR('',#285989); +#305658 = CURVE_STYLE('',#305659,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305660 = STYLED_ITEM('color',(#305661),#108710); +#305661 = PRESENTATION_STYLE_ASSIGNMENT((#305662,#305667)); +#305662 = SURFACE_STYLE_USAGE(.BOTH.,#305663); +#305663 = SURFACE_SIDE_STYLE('',(#305664)); +#305664 = SURFACE_STYLE_FILL_AREA(#305665); +#305665 = FILL_AREA_STYLE('',(#305666)); +#305666 = FILL_AREA_STYLE_COLOUR('',#285989); +#305667 = CURVE_STYLE('',#305668,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305669 = STYLED_ITEM('color',(#305670),#108752); +#305670 = PRESENTATION_STYLE_ASSIGNMENT((#305671,#305676)); +#305671 = SURFACE_STYLE_USAGE(.BOTH.,#305672); +#305672 = SURFACE_SIDE_STYLE('',(#305673)); +#305673 = SURFACE_STYLE_FILL_AREA(#305674); +#305674 = FILL_AREA_STYLE('',(#305675)); +#305675 = FILL_AREA_STYLE_COLOUR('',#285989); +#305676 = CURVE_STYLE('',#305677,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305678 = STYLED_ITEM('color',(#305679),#108769); +#305679 = PRESENTATION_STYLE_ASSIGNMENT((#305680,#305685)); +#305680 = SURFACE_STYLE_USAGE(.BOTH.,#305681); +#305681 = SURFACE_SIDE_STYLE('',(#305682)); +#305682 = SURFACE_STYLE_FILL_AREA(#305683); +#305683 = FILL_AREA_STYLE('',(#305684)); +#305684 = FILL_AREA_STYLE_COLOUR('',#270350); +#305685 = CURVE_STYLE('',#305686,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305687 = OVER_RIDING_STYLED_ITEM('overriding color',(#305688),#108776, + #305678); +#305688 = PRESENTATION_STYLE_ASSIGNMENT((#305689,#305694)); +#305689 = SURFACE_STYLE_USAGE(.BOTH.,#305690); +#305690 = SURFACE_SIDE_STYLE('',(#305691)); +#305691 = SURFACE_STYLE_FILL_AREA(#305692); +#305692 = FILL_AREA_STYLE('',(#305693)); +#305693 = FILL_AREA_STYLE_COLOUR('',#285989); +#305694 = CURVE_STYLE('',#305695,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305696 = STYLED_ITEM('color',(#305697),#108786); +#305697 = PRESENTATION_STYLE_ASSIGNMENT((#305698,#305703)); +#305698 = SURFACE_STYLE_USAGE(.BOTH.,#305699); +#305699 = SURFACE_SIDE_STYLE('',(#305700)); +#305700 = SURFACE_STYLE_FILL_AREA(#305701); +#305701 = FILL_AREA_STYLE('',(#305702)); +#305702 = FILL_AREA_STYLE_COLOUR('',#270350); +#305703 = CURVE_STYLE('',#305704,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305705 = OVER_RIDING_STYLED_ITEM('overriding color',(#305706),#108791, + #305696); +#305706 = PRESENTATION_STYLE_ASSIGNMENT((#305707,#305712)); +#305707 = SURFACE_STYLE_USAGE(.BOTH.,#305708); +#305708 = SURFACE_SIDE_STYLE('',(#305709)); +#305709 = SURFACE_STYLE_FILL_AREA(#305710); +#305710 = FILL_AREA_STYLE('',(#305711)); +#305711 = FILL_AREA_STYLE_COLOUR('',#285989); +#305712 = CURVE_STYLE('',#305713,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305714 = STYLED_ITEM('color',(#305715),#108803); +#305715 = PRESENTATION_STYLE_ASSIGNMENT((#305716,#305721)); +#305716 = SURFACE_STYLE_USAGE(.BOTH.,#305717); +#305717 = SURFACE_SIDE_STYLE('',(#305718)); +#305718 = SURFACE_STYLE_FILL_AREA(#305719); +#305719 = FILL_AREA_STYLE('',(#305720)); +#305720 = FILL_AREA_STYLE_COLOUR('',#285989); +#305721 = CURVE_STYLE('',#305722,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305723 = STYLED_ITEM('color',(#305724),#108852); +#305724 = PRESENTATION_STYLE_ASSIGNMENT((#305725,#305730)); +#305725 = SURFACE_STYLE_USAGE(.BOTH.,#305726); +#305726 = SURFACE_SIDE_STYLE('',(#305727)); +#305727 = SURFACE_STYLE_FILL_AREA(#305728); +#305728 = FILL_AREA_STYLE('',(#305729)); +#305729 = FILL_AREA_STYLE_COLOUR('',#285989); +#305730 = CURVE_STYLE('',#305731,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305732 = STYLED_ITEM('color',(#305733),#108876); +#305733 = PRESENTATION_STYLE_ASSIGNMENT((#305734,#305739)); +#305734 = SURFACE_STYLE_USAGE(.BOTH.,#305735); +#305735 = SURFACE_SIDE_STYLE('',(#305736)); +#305736 = SURFACE_STYLE_FILL_AREA(#305737); +#305737 = FILL_AREA_STYLE('',(#305738)); +#305738 = FILL_AREA_STYLE_COLOUR('',#285989); +#305739 = CURVE_STYLE('',#305740,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305741 = STYLED_ITEM('color',(#305742),#108918); +#305742 = PRESENTATION_STYLE_ASSIGNMENT((#305743,#305748)); +#305743 = SURFACE_STYLE_USAGE(.BOTH.,#305744); +#305744 = SURFACE_SIDE_STYLE('',(#305745)); +#305745 = SURFACE_STYLE_FILL_AREA(#305746); +#305746 = FILL_AREA_STYLE('',(#305747)); +#305747 = FILL_AREA_STYLE_COLOUR('',#285989); +#305748 = CURVE_STYLE('',#305749,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305750 = STYLED_ITEM('color',(#305751),#108935); +#305751 = PRESENTATION_STYLE_ASSIGNMENT((#305752,#305757)); +#305752 = SURFACE_STYLE_USAGE(.BOTH.,#305753); +#305753 = SURFACE_SIDE_STYLE('',(#305754)); +#305754 = SURFACE_STYLE_FILL_AREA(#305755); +#305755 = FILL_AREA_STYLE('',(#305756)); +#305756 = FILL_AREA_STYLE_COLOUR('',#270350); +#305757 = CURVE_STYLE('',#305758,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305759 = OVER_RIDING_STYLED_ITEM('overriding color',(#305760),#108942, + #305750); +#305760 = PRESENTATION_STYLE_ASSIGNMENT((#305761,#305766)); +#305761 = SURFACE_STYLE_USAGE(.BOTH.,#305762); +#305762 = SURFACE_SIDE_STYLE('',(#305763)); +#305763 = SURFACE_STYLE_FILL_AREA(#305764); +#305764 = FILL_AREA_STYLE('',(#305765)); +#305765 = FILL_AREA_STYLE_COLOUR('',#285989); +#305766 = CURVE_STYLE('',#305767,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305768 = STYLED_ITEM('color',(#305769),#108952); +#305769 = PRESENTATION_STYLE_ASSIGNMENT((#305770,#305775)); +#305770 = SURFACE_STYLE_USAGE(.BOTH.,#305771); +#305771 = SURFACE_SIDE_STYLE('',(#305772)); +#305772 = SURFACE_STYLE_FILL_AREA(#305773); +#305773 = FILL_AREA_STYLE('',(#305774)); +#305774 = FILL_AREA_STYLE_COLOUR('',#270350); +#305775 = CURVE_STYLE('',#305776,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305777 = OVER_RIDING_STYLED_ITEM('overriding color',(#305778),#108957, + #305768); +#305778 = PRESENTATION_STYLE_ASSIGNMENT((#305779,#305784)); +#305779 = SURFACE_STYLE_USAGE(.BOTH.,#305780); +#305780 = SURFACE_SIDE_STYLE('',(#305781)); +#305781 = SURFACE_STYLE_FILL_AREA(#305782); +#305782 = FILL_AREA_STYLE('',(#305783)); +#305783 = FILL_AREA_STYLE_COLOUR('',#285989); +#305784 = CURVE_STYLE('',#305785,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305786 = STYLED_ITEM('color',(#305787),#108969); +#305787 = PRESENTATION_STYLE_ASSIGNMENT((#305788,#305793)); +#305788 = SURFACE_STYLE_USAGE(.BOTH.,#305789); +#305789 = SURFACE_SIDE_STYLE('',(#305790)); +#305790 = SURFACE_STYLE_FILL_AREA(#305791); +#305791 = FILL_AREA_STYLE('',(#305792)); +#305792 = FILL_AREA_STYLE_COLOUR('',#285989); +#305793 = CURVE_STYLE('',#305794,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305795 = STYLED_ITEM('color',(#305796),#109018); +#305796 = PRESENTATION_STYLE_ASSIGNMENT((#305797,#305802)); +#305797 = SURFACE_STYLE_USAGE(.BOTH.,#305798); +#305798 = SURFACE_SIDE_STYLE('',(#305799)); +#305799 = SURFACE_STYLE_FILL_AREA(#305800); +#305800 = FILL_AREA_STYLE('',(#305801)); +#305801 = FILL_AREA_STYLE_COLOUR('',#285989); +#305802 = CURVE_STYLE('',#305803,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305804 = STYLED_ITEM('color',(#305805),#109042); +#305805 = PRESENTATION_STYLE_ASSIGNMENT((#305806,#305811)); +#305806 = SURFACE_STYLE_USAGE(.BOTH.,#305807); +#305807 = SURFACE_SIDE_STYLE('',(#305808)); +#305808 = SURFACE_STYLE_FILL_AREA(#305809); +#305809 = FILL_AREA_STYLE('',(#305810)); +#305810 = FILL_AREA_STYLE_COLOUR('',#285989); +#305811 = CURVE_STYLE('',#305812,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305813 = STYLED_ITEM('color',(#305814),#109084); +#305814 = PRESENTATION_STYLE_ASSIGNMENT((#305815,#305820)); +#305815 = SURFACE_STYLE_USAGE(.BOTH.,#305816); +#305816 = SURFACE_SIDE_STYLE('',(#305817)); +#305817 = SURFACE_STYLE_FILL_AREA(#305818); +#305818 = FILL_AREA_STYLE('',(#305819)); +#305819 = FILL_AREA_STYLE_COLOUR('',#285989); +#305820 = CURVE_STYLE('',#305821,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305822 = STYLED_ITEM('color',(#305823),#109101); +#305823 = PRESENTATION_STYLE_ASSIGNMENT((#305824,#305829)); +#305824 = SURFACE_STYLE_USAGE(.BOTH.,#305825); +#305825 = SURFACE_SIDE_STYLE('',(#305826)); +#305826 = SURFACE_STYLE_FILL_AREA(#305827); +#305827 = FILL_AREA_STYLE('',(#305828)); +#305828 = FILL_AREA_STYLE_COLOUR('',#270350); +#305829 = CURVE_STYLE('',#305830,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305831 = OVER_RIDING_STYLED_ITEM('overriding color',(#305832),#109108, + #305822); +#305832 = PRESENTATION_STYLE_ASSIGNMENT((#305833,#305838)); +#305833 = SURFACE_STYLE_USAGE(.BOTH.,#305834); +#305834 = SURFACE_SIDE_STYLE('',(#305835)); +#305835 = SURFACE_STYLE_FILL_AREA(#305836); +#305836 = FILL_AREA_STYLE('',(#305837)); +#305837 = FILL_AREA_STYLE_COLOUR('',#285989); +#305838 = CURVE_STYLE('',#305839,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305840 = STYLED_ITEM('color',(#305841),#109118); +#305841 = PRESENTATION_STYLE_ASSIGNMENT((#305842,#305847)); +#305842 = SURFACE_STYLE_USAGE(.BOTH.,#305843); +#305843 = SURFACE_SIDE_STYLE('',(#305844)); +#305844 = SURFACE_STYLE_FILL_AREA(#305845); +#305845 = FILL_AREA_STYLE('',(#305846)); +#305846 = FILL_AREA_STYLE_COLOUR('',#270350); +#305847 = CURVE_STYLE('',#305848,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305849 = OVER_RIDING_STYLED_ITEM('overriding color',(#305850),#109123, + #305840); +#305850 = PRESENTATION_STYLE_ASSIGNMENT((#305851,#305856)); +#305851 = SURFACE_STYLE_USAGE(.BOTH.,#305852); +#305852 = SURFACE_SIDE_STYLE('',(#305853)); +#305853 = SURFACE_STYLE_FILL_AREA(#305854); +#305854 = FILL_AREA_STYLE('',(#305855)); +#305855 = FILL_AREA_STYLE_COLOUR('',#285989); +#305856 = CURVE_STYLE('',#305857,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305858 = STYLED_ITEM('color',(#305859),#109135); +#305859 = PRESENTATION_STYLE_ASSIGNMENT((#305860,#305865)); +#305860 = SURFACE_STYLE_USAGE(.BOTH.,#305861); +#305861 = SURFACE_SIDE_STYLE('',(#305862)); +#305862 = SURFACE_STYLE_FILL_AREA(#305863); +#305863 = FILL_AREA_STYLE('',(#305864)); +#305864 = FILL_AREA_STYLE_COLOUR('',#285989); +#305865 = CURVE_STYLE('',#305866,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305867 = STYLED_ITEM('color',(#305868),#109184); +#305868 = PRESENTATION_STYLE_ASSIGNMENT((#305869,#305874)); +#305869 = SURFACE_STYLE_USAGE(.BOTH.,#305870); +#305870 = SURFACE_SIDE_STYLE('',(#305871)); +#305871 = SURFACE_STYLE_FILL_AREA(#305872); +#305872 = FILL_AREA_STYLE('',(#305873)); +#305873 = FILL_AREA_STYLE_COLOUR('',#285989); +#305874 = CURVE_STYLE('',#305875,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305876 = STYLED_ITEM('color',(#305877),#109208); +#305877 = PRESENTATION_STYLE_ASSIGNMENT((#305878,#305883)); +#305878 = SURFACE_STYLE_USAGE(.BOTH.,#305879); +#305879 = SURFACE_SIDE_STYLE('',(#305880)); +#305880 = SURFACE_STYLE_FILL_AREA(#305881); +#305881 = FILL_AREA_STYLE('',(#305882)); +#305882 = FILL_AREA_STYLE_COLOUR('',#285989); +#305883 = CURVE_STYLE('',#305884,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305885 = STYLED_ITEM('color',(#305886),#109250); +#305886 = PRESENTATION_STYLE_ASSIGNMENT((#305887,#305892)); +#305887 = SURFACE_STYLE_USAGE(.BOTH.,#305888); +#305888 = SURFACE_SIDE_STYLE('',(#305889)); +#305889 = SURFACE_STYLE_FILL_AREA(#305890); +#305890 = FILL_AREA_STYLE('',(#305891)); +#305891 = FILL_AREA_STYLE_COLOUR('',#285989); +#305892 = CURVE_STYLE('',#305893,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305894 = STYLED_ITEM('color',(#305895),#109267); +#305895 = PRESENTATION_STYLE_ASSIGNMENT((#305896,#305901)); +#305896 = SURFACE_STYLE_USAGE(.BOTH.,#305897); +#305897 = SURFACE_SIDE_STYLE('',(#305898)); +#305898 = SURFACE_STYLE_FILL_AREA(#305899); +#305899 = FILL_AREA_STYLE('',(#305900)); +#305900 = FILL_AREA_STYLE_COLOUR('',#270350); +#305901 = CURVE_STYLE('',#305902,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305903 = OVER_RIDING_STYLED_ITEM('overriding color',(#305904),#109274, + #305894); +#305904 = PRESENTATION_STYLE_ASSIGNMENT((#305905,#305910)); +#305905 = SURFACE_STYLE_USAGE(.BOTH.,#305906); +#305906 = SURFACE_SIDE_STYLE('',(#305907)); +#305907 = SURFACE_STYLE_FILL_AREA(#305908); +#305908 = FILL_AREA_STYLE('',(#305909)); +#305909 = FILL_AREA_STYLE_COLOUR('',#285989); +#305910 = CURVE_STYLE('',#305911,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305912 = STYLED_ITEM('color',(#305913),#109284); +#305913 = PRESENTATION_STYLE_ASSIGNMENT((#305914,#305919)); +#305914 = SURFACE_STYLE_USAGE(.BOTH.,#305915); +#305915 = SURFACE_SIDE_STYLE('',(#305916)); +#305916 = SURFACE_STYLE_FILL_AREA(#305917); +#305917 = FILL_AREA_STYLE('',(#305918)); +#305918 = FILL_AREA_STYLE_COLOUR('',#270350); +#305919 = CURVE_STYLE('',#305920,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305921 = OVER_RIDING_STYLED_ITEM('overriding color',(#305922),#109289, + #305912); +#305922 = PRESENTATION_STYLE_ASSIGNMENT((#305923,#305928)); +#305923 = SURFACE_STYLE_USAGE(.BOTH.,#305924); +#305924 = SURFACE_SIDE_STYLE('',(#305925)); +#305925 = SURFACE_STYLE_FILL_AREA(#305926); +#305926 = FILL_AREA_STYLE('',(#305927)); +#305927 = FILL_AREA_STYLE_COLOUR('',#285989); +#305928 = CURVE_STYLE('',#305929,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305930 = STYLED_ITEM('color',(#305931),#109301); +#305931 = PRESENTATION_STYLE_ASSIGNMENT((#305932,#305937)); +#305932 = SURFACE_STYLE_USAGE(.BOTH.,#305933); +#305933 = SURFACE_SIDE_STYLE('',(#305934)); +#305934 = SURFACE_STYLE_FILL_AREA(#305935); +#305935 = FILL_AREA_STYLE('',(#305936)); +#305936 = FILL_AREA_STYLE_COLOUR('',#285989); +#305937 = CURVE_STYLE('',#305938,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305939 = STYLED_ITEM('color',(#305940),#109350); +#305940 = PRESENTATION_STYLE_ASSIGNMENT((#305941,#305946)); +#305941 = SURFACE_STYLE_USAGE(.BOTH.,#305942); +#305942 = SURFACE_SIDE_STYLE('',(#305943)); +#305943 = SURFACE_STYLE_FILL_AREA(#305944); +#305944 = FILL_AREA_STYLE('',(#305945)); +#305945 = FILL_AREA_STYLE_COLOUR('',#285989); +#305946 = CURVE_STYLE('',#305947,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305948 = STYLED_ITEM('color',(#305949),#109374); +#305949 = PRESENTATION_STYLE_ASSIGNMENT((#305950,#305955)); +#305950 = SURFACE_STYLE_USAGE(.BOTH.,#305951); +#305951 = SURFACE_SIDE_STYLE('',(#305952)); +#305952 = SURFACE_STYLE_FILL_AREA(#305953); +#305953 = FILL_AREA_STYLE('',(#305954)); +#305954 = FILL_AREA_STYLE_COLOUR('',#285989); +#305955 = CURVE_STYLE('',#305956,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305957 = STYLED_ITEM('color',(#305958),#109416); +#305958 = PRESENTATION_STYLE_ASSIGNMENT((#305959,#305964)); +#305959 = SURFACE_STYLE_USAGE(.BOTH.,#305960); +#305960 = SURFACE_SIDE_STYLE('',(#305961)); +#305961 = SURFACE_STYLE_FILL_AREA(#305962); +#305962 = FILL_AREA_STYLE('',(#305963)); +#305963 = FILL_AREA_STYLE_COLOUR('',#285989); +#305964 = CURVE_STYLE('',#305965,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305966 = STYLED_ITEM('color',(#305967),#109433); +#305967 = PRESENTATION_STYLE_ASSIGNMENT((#305968,#305973)); +#305968 = SURFACE_STYLE_USAGE(.BOTH.,#305969); +#305969 = SURFACE_SIDE_STYLE('',(#305970)); +#305970 = SURFACE_STYLE_FILL_AREA(#305971); +#305971 = FILL_AREA_STYLE('',(#305972)); +#305972 = FILL_AREA_STYLE_COLOUR('',#270350); +#305973 = CURVE_STYLE('',#305974,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305975 = OVER_RIDING_STYLED_ITEM('overriding color',(#305976),#109440, + #305966); +#305976 = PRESENTATION_STYLE_ASSIGNMENT((#305977,#305982)); +#305977 = SURFACE_STYLE_USAGE(.BOTH.,#305978); +#305978 = SURFACE_SIDE_STYLE('',(#305979)); +#305979 = SURFACE_STYLE_FILL_AREA(#305980); +#305980 = FILL_AREA_STYLE('',(#305981)); +#305981 = FILL_AREA_STYLE_COLOUR('',#285989); +#305982 = CURVE_STYLE('',#305983,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#305983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305984 = STYLED_ITEM('color',(#305985),#109450); +#305985 = PRESENTATION_STYLE_ASSIGNMENT((#305986,#305991)); +#305986 = SURFACE_STYLE_USAGE(.BOTH.,#305987); +#305987 = SURFACE_SIDE_STYLE('',(#305988)); +#305988 = SURFACE_STYLE_FILL_AREA(#305989); +#305989 = FILL_AREA_STYLE('',(#305990)); +#305990 = FILL_AREA_STYLE_COLOUR('',#270350); +#305991 = CURVE_STYLE('',#305992,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#305992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#305993 = OVER_RIDING_STYLED_ITEM('overriding color',(#305994),#109455, + #305984); +#305994 = PRESENTATION_STYLE_ASSIGNMENT((#305995,#306000)); +#305995 = SURFACE_STYLE_USAGE(.BOTH.,#305996); +#305996 = SURFACE_SIDE_STYLE('',(#305997)); +#305997 = SURFACE_STYLE_FILL_AREA(#305998); +#305998 = FILL_AREA_STYLE('',(#305999)); +#305999 = FILL_AREA_STYLE_COLOUR('',#285989); +#306000 = CURVE_STYLE('',#306001,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306002 = STYLED_ITEM('color',(#306003),#109467); +#306003 = PRESENTATION_STYLE_ASSIGNMENT((#306004,#306009)); +#306004 = SURFACE_STYLE_USAGE(.BOTH.,#306005); +#306005 = SURFACE_SIDE_STYLE('',(#306006)); +#306006 = SURFACE_STYLE_FILL_AREA(#306007); +#306007 = FILL_AREA_STYLE('',(#306008)); +#306008 = FILL_AREA_STYLE_COLOUR('',#285989); +#306009 = CURVE_STYLE('',#306010,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306011 = STYLED_ITEM('color',(#306012),#109516); +#306012 = PRESENTATION_STYLE_ASSIGNMENT((#306013,#306018)); +#306013 = SURFACE_STYLE_USAGE(.BOTH.,#306014); +#306014 = SURFACE_SIDE_STYLE('',(#306015)); +#306015 = SURFACE_STYLE_FILL_AREA(#306016); +#306016 = FILL_AREA_STYLE('',(#306017)); +#306017 = FILL_AREA_STYLE_COLOUR('',#285989); +#306018 = CURVE_STYLE('',#306019,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306020 = STYLED_ITEM('color',(#306021),#109540); +#306021 = PRESENTATION_STYLE_ASSIGNMENT((#306022,#306027)); +#306022 = SURFACE_STYLE_USAGE(.BOTH.,#306023); +#306023 = SURFACE_SIDE_STYLE('',(#306024)); +#306024 = SURFACE_STYLE_FILL_AREA(#306025); +#306025 = FILL_AREA_STYLE('',(#306026)); +#306026 = FILL_AREA_STYLE_COLOUR('',#285989); +#306027 = CURVE_STYLE('',#306028,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306029 = STYLED_ITEM('color',(#306030),#109582); +#306030 = PRESENTATION_STYLE_ASSIGNMENT((#306031,#306036)); +#306031 = SURFACE_STYLE_USAGE(.BOTH.,#306032); +#306032 = SURFACE_SIDE_STYLE('',(#306033)); +#306033 = SURFACE_STYLE_FILL_AREA(#306034); +#306034 = FILL_AREA_STYLE('',(#306035)); +#306035 = FILL_AREA_STYLE_COLOUR('',#285989); +#306036 = CURVE_STYLE('',#306037,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306038 = STYLED_ITEM('color',(#306039),#109599); +#306039 = PRESENTATION_STYLE_ASSIGNMENT((#306040,#306045)); +#306040 = SURFACE_STYLE_USAGE(.BOTH.,#306041); +#306041 = SURFACE_SIDE_STYLE('',(#306042)); +#306042 = SURFACE_STYLE_FILL_AREA(#306043); +#306043 = FILL_AREA_STYLE('',(#306044)); +#306044 = FILL_AREA_STYLE_COLOUR('',#285989); +#306045 = CURVE_STYLE('',#306046,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306047 = STYLED_ITEM('color',(#306048),#109616); +#306048 = PRESENTATION_STYLE_ASSIGNMENT((#306049,#306054)); +#306049 = SURFACE_STYLE_USAGE(.BOTH.,#306050); +#306050 = SURFACE_SIDE_STYLE('',(#306051)); +#306051 = SURFACE_STYLE_FILL_AREA(#306052); +#306052 = FILL_AREA_STYLE('',(#306053)); +#306053 = FILL_AREA_STYLE_COLOUR('',#285989); +#306054 = CURVE_STYLE('',#306055,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306056 = STYLED_ITEM('color',(#306057),#109633); +#306057 = PRESENTATION_STYLE_ASSIGNMENT((#306058,#306063)); +#306058 = SURFACE_STYLE_USAGE(.BOTH.,#306059); +#306059 = SURFACE_SIDE_STYLE('',(#306060)); +#306060 = SURFACE_STYLE_FILL_AREA(#306061); +#306061 = FILL_AREA_STYLE('',(#306062)); +#306062 = FILL_AREA_STYLE_COLOUR('',#285989); +#306063 = CURVE_STYLE('',#306064,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306065 = STYLED_ITEM('color',(#306066),#109645); +#306066 = PRESENTATION_STYLE_ASSIGNMENT((#306067,#306072)); +#306067 = SURFACE_STYLE_USAGE(.BOTH.,#306068); +#306068 = SURFACE_SIDE_STYLE('',(#306069)); +#306069 = SURFACE_STYLE_FILL_AREA(#306070); +#306070 = FILL_AREA_STYLE('',(#306071)); +#306071 = FILL_AREA_STYLE_COLOUR('',#285989); +#306072 = CURVE_STYLE('',#306073,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306074 = STYLED_ITEM('color',(#306075),#109662); +#306075 = PRESENTATION_STYLE_ASSIGNMENT((#306076,#306081)); +#306076 = SURFACE_STYLE_USAGE(.BOTH.,#306077); +#306077 = SURFACE_SIDE_STYLE('',(#306078)); +#306078 = SURFACE_STYLE_FILL_AREA(#306079); +#306079 = FILL_AREA_STYLE('',(#306080)); +#306080 = FILL_AREA_STYLE_COLOUR('',#285989); +#306081 = CURVE_STYLE('',#306082,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306083 = STYLED_ITEM('color',(#306084),#109679); +#306084 = PRESENTATION_STYLE_ASSIGNMENT((#306085,#306090)); +#306085 = SURFACE_STYLE_USAGE(.BOTH.,#306086); +#306086 = SURFACE_SIDE_STYLE('',(#306087)); +#306087 = SURFACE_STYLE_FILL_AREA(#306088); +#306088 = FILL_AREA_STYLE('',(#306089)); +#306089 = FILL_AREA_STYLE_COLOUR('',#285989); +#306090 = CURVE_STYLE('',#306091,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306092 = STYLED_ITEM('color',(#306093),#109691); +#306093 = PRESENTATION_STYLE_ASSIGNMENT((#306094,#306099)); +#306094 = SURFACE_STYLE_USAGE(.BOTH.,#306095); +#306095 = SURFACE_SIDE_STYLE('',(#306096)); +#306096 = SURFACE_STYLE_FILL_AREA(#306097); +#306097 = FILL_AREA_STYLE('',(#306098)); +#306098 = FILL_AREA_STYLE_COLOUR('',#285989); +#306099 = CURVE_STYLE('',#306100,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306101 = STYLED_ITEM('color',(#306102),#109708); +#306102 = PRESENTATION_STYLE_ASSIGNMENT((#306103,#306108)); +#306103 = SURFACE_STYLE_USAGE(.BOTH.,#306104); +#306104 = SURFACE_SIDE_STYLE('',(#306105)); +#306105 = SURFACE_STYLE_FILL_AREA(#306106); +#306106 = FILL_AREA_STYLE('',(#306107)); +#306107 = FILL_AREA_STYLE_COLOUR('',#285989); +#306108 = CURVE_STYLE('',#306109,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306110 = STYLED_ITEM('color',(#306111),#109725); +#306111 = PRESENTATION_STYLE_ASSIGNMENT((#306112,#306117)); +#306112 = SURFACE_STYLE_USAGE(.BOTH.,#306113); +#306113 = SURFACE_SIDE_STYLE('',(#306114)); +#306114 = SURFACE_STYLE_FILL_AREA(#306115); +#306115 = FILL_AREA_STYLE('',(#306116)); +#306116 = FILL_AREA_STYLE_COLOUR('',#285989); +#306117 = CURVE_STYLE('',#306118,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306119 = STYLED_ITEM('color',(#306120),#109737); +#306120 = PRESENTATION_STYLE_ASSIGNMENT((#306121,#306126)); +#306121 = SURFACE_STYLE_USAGE(.BOTH.,#306122); +#306122 = SURFACE_SIDE_STYLE('',(#306123)); +#306123 = SURFACE_STYLE_FILL_AREA(#306124); +#306124 = FILL_AREA_STYLE('',(#306125)); +#306125 = FILL_AREA_STYLE_COLOUR('',#285989); +#306126 = CURVE_STYLE('',#306127,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306128 = STYLED_ITEM('color',(#306129),#109754); +#306129 = PRESENTATION_STYLE_ASSIGNMENT((#306130,#306135)); +#306130 = SURFACE_STYLE_USAGE(.BOTH.,#306131); +#306131 = SURFACE_SIDE_STYLE('',(#306132)); +#306132 = SURFACE_STYLE_FILL_AREA(#306133); +#306133 = FILL_AREA_STYLE('',(#306134)); +#306134 = FILL_AREA_STYLE_COLOUR('',#285989); +#306135 = CURVE_STYLE('',#306136,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306137 = STYLED_ITEM('color',(#306138),#109771); +#306138 = PRESENTATION_STYLE_ASSIGNMENT((#306139,#306144)); +#306139 = SURFACE_STYLE_USAGE(.BOTH.,#306140); +#306140 = SURFACE_SIDE_STYLE('',(#306141)); +#306141 = SURFACE_STYLE_FILL_AREA(#306142); +#306142 = FILL_AREA_STYLE('',(#306143)); +#306143 = FILL_AREA_STYLE_COLOUR('',#285989); +#306144 = CURVE_STYLE('',#306145,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306146 = STYLED_ITEM('color',(#306147),#109783); +#306147 = PRESENTATION_STYLE_ASSIGNMENT((#306148,#306153)); +#306148 = SURFACE_STYLE_USAGE(.BOTH.,#306149); +#306149 = SURFACE_SIDE_STYLE('',(#306150)); +#306150 = SURFACE_STYLE_FILL_AREA(#306151); +#306151 = FILL_AREA_STYLE('',(#306152)); +#306152 = FILL_AREA_STYLE_COLOUR('',#285989); +#306153 = CURVE_STYLE('',#306154,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306155 = STYLED_ITEM('color',(#306156),#109800); +#306156 = PRESENTATION_STYLE_ASSIGNMENT((#306157,#306162)); +#306157 = SURFACE_STYLE_USAGE(.BOTH.,#306158); +#306158 = SURFACE_SIDE_STYLE('',(#306159)); +#306159 = SURFACE_STYLE_FILL_AREA(#306160); +#306160 = FILL_AREA_STYLE('',(#306161)); +#306161 = FILL_AREA_STYLE_COLOUR('',#285989); +#306162 = CURVE_STYLE('',#306163,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306164 = STYLED_ITEM('color',(#306165),#109817); +#306165 = PRESENTATION_STYLE_ASSIGNMENT((#306166,#306171)); +#306166 = SURFACE_STYLE_USAGE(.BOTH.,#306167); +#306167 = SURFACE_SIDE_STYLE('',(#306168)); +#306168 = SURFACE_STYLE_FILL_AREA(#306169); +#306169 = FILL_AREA_STYLE('',(#306170)); +#306170 = FILL_AREA_STYLE_COLOUR('',#285989); +#306171 = CURVE_STYLE('',#306172,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306173 = STYLED_ITEM('color',(#306174),#109829); +#306174 = PRESENTATION_STYLE_ASSIGNMENT((#306175,#306180)); +#306175 = SURFACE_STYLE_USAGE(.BOTH.,#306176); +#306176 = SURFACE_SIDE_STYLE('',(#306177)); +#306177 = SURFACE_STYLE_FILL_AREA(#306178); +#306178 = FILL_AREA_STYLE('',(#306179)); +#306179 = FILL_AREA_STYLE_COLOUR('',#285989); +#306180 = CURVE_STYLE('',#306181,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306182 = STYLED_ITEM('color',(#306183),#109846); +#306183 = PRESENTATION_STYLE_ASSIGNMENT((#306184,#306189)); +#306184 = SURFACE_STYLE_USAGE(.BOTH.,#306185); +#306185 = SURFACE_SIDE_STYLE('',(#306186)); +#306186 = SURFACE_STYLE_FILL_AREA(#306187); +#306187 = FILL_AREA_STYLE('',(#306188)); +#306188 = FILL_AREA_STYLE_COLOUR('',#285989); +#306189 = CURVE_STYLE('',#306190,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306191 = STYLED_ITEM('color',(#306192),#109863); +#306192 = PRESENTATION_STYLE_ASSIGNMENT((#306193,#306198)); +#306193 = SURFACE_STYLE_USAGE(.BOTH.,#306194); +#306194 = SURFACE_SIDE_STYLE('',(#306195)); +#306195 = SURFACE_STYLE_FILL_AREA(#306196); +#306196 = FILL_AREA_STYLE('',(#306197)); +#306197 = FILL_AREA_STYLE_COLOUR('',#285989); +#306198 = CURVE_STYLE('',#306199,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306200 = STYLED_ITEM('color',(#306201),#109875); +#306201 = PRESENTATION_STYLE_ASSIGNMENT((#306202,#306207)); +#306202 = SURFACE_STYLE_USAGE(.BOTH.,#306203); +#306203 = SURFACE_SIDE_STYLE('',(#306204)); +#306204 = SURFACE_STYLE_FILL_AREA(#306205); +#306205 = FILL_AREA_STYLE('',(#306206)); +#306206 = FILL_AREA_STYLE_COLOUR('',#285989); +#306207 = CURVE_STYLE('',#306208,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306209 = STYLED_ITEM('color',(#306210),#109892); +#306210 = PRESENTATION_STYLE_ASSIGNMENT((#306211,#306216)); +#306211 = SURFACE_STYLE_USAGE(.BOTH.,#306212); +#306212 = SURFACE_SIDE_STYLE('',(#306213)); +#306213 = SURFACE_STYLE_FILL_AREA(#306214); +#306214 = FILL_AREA_STYLE('',(#306215)); +#306215 = FILL_AREA_STYLE_COLOUR('',#285989); +#306216 = CURVE_STYLE('',#306217,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306218 = STYLED_ITEM('color',(#306219),#109909); +#306219 = PRESENTATION_STYLE_ASSIGNMENT((#306220,#306225)); +#306220 = SURFACE_STYLE_USAGE(.BOTH.,#306221); +#306221 = SURFACE_SIDE_STYLE('',(#306222)); +#306222 = SURFACE_STYLE_FILL_AREA(#306223); +#306223 = FILL_AREA_STYLE('',(#306224)); +#306224 = FILL_AREA_STYLE_COLOUR('',#285989); +#306225 = CURVE_STYLE('',#306226,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306227 = STYLED_ITEM('color',(#306228),#109921); +#306228 = PRESENTATION_STYLE_ASSIGNMENT((#306229,#306234)); +#306229 = SURFACE_STYLE_USAGE(.BOTH.,#306230); +#306230 = SURFACE_SIDE_STYLE('',(#306231)); +#306231 = SURFACE_STYLE_FILL_AREA(#306232); +#306232 = FILL_AREA_STYLE('',(#306233)); +#306233 = FILL_AREA_STYLE_COLOUR('',#285989); +#306234 = CURVE_STYLE('',#306235,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306236 = STYLED_ITEM('color',(#306237),#109938); +#306237 = PRESENTATION_STYLE_ASSIGNMENT((#306238,#306243)); +#306238 = SURFACE_STYLE_USAGE(.BOTH.,#306239); +#306239 = SURFACE_SIDE_STYLE('',(#306240)); +#306240 = SURFACE_STYLE_FILL_AREA(#306241); +#306241 = FILL_AREA_STYLE('',(#306242)); +#306242 = FILL_AREA_STYLE_COLOUR('',#285989); +#306243 = CURVE_STYLE('',#306244,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306245 = STYLED_ITEM('color',(#306246),#109955); +#306246 = PRESENTATION_STYLE_ASSIGNMENT((#306247,#306252)); +#306247 = SURFACE_STYLE_USAGE(.BOTH.,#306248); +#306248 = SURFACE_SIDE_STYLE('',(#306249)); +#306249 = SURFACE_STYLE_FILL_AREA(#306250); +#306250 = FILL_AREA_STYLE('',(#306251)); +#306251 = FILL_AREA_STYLE_COLOUR('',#285989); +#306252 = CURVE_STYLE('',#306253,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#306253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#306254 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #306255,#306262,#306269,#306276,#306283,#306290,#306297,#306304, + #306311,#306318,#306325,#306332,#306339,#306346,#306354,#306361, + #306368,#306375,#306382,#306389,#306396,#306403,#306410,#306417, + #306424,#306431),#1342); +#306255 = STYLED_ITEM('color',(#306256),#554); +#306256 = PRESENTATION_STYLE_ASSIGNMENT((#306257)); +#306257 = SURFACE_STYLE_USAGE(.BOTH.,#306258); +#306258 = SURFACE_SIDE_STYLE('',(#306259)); +#306259 = SURFACE_STYLE_FILL_AREA(#306260); +#306260 = FILL_AREA_STYLE('',(#306261)); +#306261 = FILL_AREA_STYLE_COLOUR('',#270441); +#306262 = STYLED_ITEM('color',(#306263),#594); +#306263 = PRESENTATION_STYLE_ASSIGNMENT((#306264)); +#306264 = SURFACE_STYLE_USAGE(.BOTH.,#306265); +#306265 = SURFACE_SIDE_STYLE('',(#306266)); +#306266 = SURFACE_STYLE_FILL_AREA(#306267); +#306267 = FILL_AREA_STYLE('',(#306268)); +#306268 = FILL_AREA_STYLE_COLOUR('',#270441); +#306269 = STYLED_ITEM('color',(#306270),#677); +#306270 = PRESENTATION_STYLE_ASSIGNMENT((#306271)); +#306271 = SURFACE_STYLE_USAGE(.BOTH.,#306272); +#306272 = SURFACE_SIDE_STYLE('',(#306273)); +#306273 = SURFACE_STYLE_FILL_AREA(#306274); +#306274 = FILL_AREA_STYLE('',(#306275)); +#306275 = FILL_AREA_STYLE_COLOUR('',#270441); +#306276 = STYLED_ITEM('color',(#306277),#702); +#306277 = PRESENTATION_STYLE_ASSIGNMENT((#306278)); +#306278 = SURFACE_STYLE_USAGE(.BOTH.,#306279); +#306279 = SURFACE_SIDE_STYLE('',(#306280)); +#306280 = SURFACE_STYLE_FILL_AREA(#306281); +#306281 = FILL_AREA_STYLE('',(#306282)); +#306282 = FILL_AREA_STYLE_COLOUR('',#270441); +#306283 = STYLED_ITEM('color',(#306284),#727); +#306284 = PRESENTATION_STYLE_ASSIGNMENT((#306285)); +#306285 = SURFACE_STYLE_USAGE(.BOTH.,#306286); +#306286 = SURFACE_SIDE_STYLE('',(#306287)); +#306287 = SURFACE_STYLE_FILL_AREA(#306288); +#306288 = FILL_AREA_STYLE('',(#306289)); +#306289 = FILL_AREA_STYLE_COLOUR('',#270441); +#306290 = STYLED_ITEM('color',(#306291),#794); +#306291 = PRESENTATION_STYLE_ASSIGNMENT((#306292)); +#306292 = SURFACE_STYLE_USAGE(.BOTH.,#306293); +#306293 = SURFACE_SIDE_STYLE('',(#306294)); +#306294 = SURFACE_STYLE_FILL_AREA(#306295); +#306295 = FILL_AREA_STYLE('',(#306296)); +#306296 = FILL_AREA_STYLE_COLOUR('',#270441); +#306297 = STYLED_ITEM('color',(#306298),#811); +#306298 = PRESENTATION_STYLE_ASSIGNMENT((#306299)); +#306299 = SURFACE_STYLE_USAGE(.BOTH.,#306300); +#306300 = SURFACE_SIDE_STYLE('',(#306301)); +#306301 = SURFACE_STYLE_FILL_AREA(#306302); +#306302 = FILL_AREA_STYLE('',(#306303)); +#306303 = FILL_AREA_STYLE_COLOUR('',#270441); +#306304 = STYLED_ITEM('color',(#306305),#828); +#306305 = PRESENTATION_STYLE_ASSIGNMENT((#306306)); +#306306 = SURFACE_STYLE_USAGE(.BOTH.,#306307); +#306307 = SURFACE_SIDE_STYLE('',(#306308)); +#306308 = SURFACE_STYLE_FILL_AREA(#306309); +#306309 = FILL_AREA_STYLE('',(#306310)); +#306310 = FILL_AREA_STYLE_COLOUR('',#282550); +#306311 = STYLED_ITEM('color',(#306312),#877); +#306312 = PRESENTATION_STYLE_ASSIGNMENT((#306313)); +#306313 = SURFACE_STYLE_USAGE(.BOTH.,#306314); +#306314 = SURFACE_SIDE_STYLE('',(#306315)); +#306315 = SURFACE_STYLE_FILL_AREA(#306316); +#306316 = FILL_AREA_STYLE('',(#306317)); +#306317 = FILL_AREA_STYLE_COLOUR('',#270441); +#306318 = STYLED_ITEM('color',(#306319),#894); +#306319 = PRESENTATION_STYLE_ASSIGNMENT((#306320)); +#306320 = SURFACE_STYLE_USAGE(.BOTH.,#306321); +#306321 = SURFACE_SIDE_STYLE('',(#306322)); +#306322 = SURFACE_STYLE_FILL_AREA(#306323); +#306323 = FILL_AREA_STYLE('',(#306324)); +#306324 = FILL_AREA_STYLE_COLOUR('',#270441); +#306325 = STYLED_ITEM('color',(#306326),#911); +#306326 = PRESENTATION_STYLE_ASSIGNMENT((#306327)); +#306327 = SURFACE_STYLE_USAGE(.BOTH.,#306328); +#306328 = SURFACE_SIDE_STYLE('',(#306329)); +#306329 = SURFACE_STYLE_FILL_AREA(#306330); +#306330 = FILL_AREA_STYLE('',(#306331)); +#306331 = FILL_AREA_STYLE_COLOUR('',#282550); +#306332 = STYLED_ITEM('color',(#306333),#960); +#306333 = PRESENTATION_STYLE_ASSIGNMENT((#306334)); +#306334 = SURFACE_STYLE_USAGE(.BOTH.,#306335); +#306335 = SURFACE_SIDE_STYLE('',(#306336)); +#306336 = SURFACE_STYLE_FILL_AREA(#306337); +#306337 = FILL_AREA_STYLE('',(#306338)); +#306338 = FILL_AREA_STYLE_COLOUR('',#282550); +#306339 = STYLED_ITEM('color',(#306340),#977); +#306340 = PRESENTATION_STYLE_ASSIGNMENT((#306341)); +#306341 = SURFACE_STYLE_USAGE(.BOTH.,#306342); +#306342 = SURFACE_SIDE_STYLE('',(#306343)); +#306343 = SURFACE_STYLE_FILL_AREA(#306344); +#306344 = FILL_AREA_STYLE('',(#306345)); +#306345 = FILL_AREA_STYLE_COLOUR('',#270441); +#306346 = STYLED_ITEM('color',(#306347),#1046); +#306347 = PRESENTATION_STYLE_ASSIGNMENT((#306348)); +#306348 = SURFACE_STYLE_USAGE(.BOTH.,#306349); +#306349 = SURFACE_SIDE_STYLE('',(#306350)); +#306350 = SURFACE_STYLE_FILL_AREA(#306351); +#306351 = FILL_AREA_STYLE('',(#306352)); +#306352 = FILL_AREA_STYLE_COLOUR('',#306353); +#306353 = COLOUR_RGB('',8.200000279077E-02,8.600000121357E-02, + 9.399999706163E-02); +#306354 = STYLED_ITEM('color',(#306355),#1077); +#306355 = PRESENTATION_STYLE_ASSIGNMENT((#306356)); +#306356 = SURFACE_STYLE_USAGE(.BOTH.,#306357); +#306357 = SURFACE_SIDE_STYLE('',(#306358)); +#306358 = SURFACE_STYLE_FILL_AREA(#306359); +#306359 = FILL_AREA_STYLE('',(#306360)); +#306360 = FILL_AREA_STYLE_COLOUR('',#306353); +#306361 = STYLED_ITEM('color',(#306362),#1101); +#306362 = PRESENTATION_STYLE_ASSIGNMENT((#306363)); +#306363 = SURFACE_STYLE_USAGE(.BOTH.,#306364); +#306364 = SURFACE_SIDE_STYLE('',(#306365)); +#306365 = SURFACE_STYLE_FILL_AREA(#306366); +#306366 = FILL_AREA_STYLE('',(#306367)); +#306367 = FILL_AREA_STYLE_COLOUR('',#270441); +#306368 = STYLED_ITEM('color',(#306369),#1170); +#306369 = PRESENTATION_STYLE_ASSIGNMENT((#306370)); +#306370 = SURFACE_STYLE_USAGE(.BOTH.,#306371); +#306371 = SURFACE_SIDE_STYLE('',(#306372)); +#306372 = SURFACE_STYLE_FILL_AREA(#306373); +#306373 = FILL_AREA_STYLE('',(#306374)); +#306374 = FILL_AREA_STYLE_COLOUR('',#306353); +#306375 = STYLED_ITEM('color',(#306376),#1194); +#306376 = PRESENTATION_STYLE_ASSIGNMENT((#306377)); +#306377 = SURFACE_STYLE_USAGE(.BOTH.,#306378); +#306378 = SURFACE_SIDE_STYLE('',(#306379)); +#306379 = SURFACE_STYLE_FILL_AREA(#306380); +#306380 = FILL_AREA_STYLE('',(#306381)); +#306381 = FILL_AREA_STYLE_COLOUR('',#270441); +#306382 = STYLED_ITEM('color',(#306383),#1211); +#306383 = PRESENTATION_STYLE_ASSIGNMENT((#306384)); +#306384 = SURFACE_STYLE_USAGE(.BOTH.,#306385); +#306385 = SURFACE_SIDE_STYLE('',(#306386)); +#306386 = SURFACE_STYLE_FILL_AREA(#306387); +#306387 = FILL_AREA_STYLE('',(#306388)); +#306388 = FILL_AREA_STYLE_COLOUR('',#270441); +#306389 = STYLED_ITEM('color',(#306390),#1228); +#306390 = PRESENTATION_STYLE_ASSIGNMENT((#306391)); +#306391 = SURFACE_STYLE_USAGE(.BOTH.,#306392); +#306392 = SURFACE_SIDE_STYLE('',(#306393)); +#306393 = SURFACE_STYLE_FILL_AREA(#306394); +#306394 = FILL_AREA_STYLE('',(#306395)); +#306395 = FILL_AREA_STYLE_COLOUR('',#270441); +#306396 = STYLED_ITEM('color',(#306397),#1245); +#306397 = PRESENTATION_STYLE_ASSIGNMENT((#306398)); +#306398 = SURFACE_STYLE_USAGE(.BOTH.,#306399); +#306399 = SURFACE_SIDE_STYLE('',(#306400)); +#306400 = SURFACE_STYLE_FILL_AREA(#306401); +#306401 = FILL_AREA_STYLE('',(#306402)); +#306402 = FILL_AREA_STYLE_COLOUR('',#270441); +#306403 = STYLED_ITEM('color',(#306404),#1262); +#306404 = PRESENTATION_STYLE_ASSIGNMENT((#306405)); +#306405 = SURFACE_STYLE_USAGE(.BOTH.,#306406); +#306406 = SURFACE_SIDE_STYLE('',(#306407)); +#306407 = SURFACE_STYLE_FILL_AREA(#306408); +#306408 = FILL_AREA_STYLE('',(#306409)); +#306409 = FILL_AREA_STYLE_COLOUR('',#270441); +#306410 = STYLED_ITEM('color',(#306411),#1279); +#306411 = PRESENTATION_STYLE_ASSIGNMENT((#306412)); +#306412 = SURFACE_STYLE_USAGE(.BOTH.,#306413); +#306413 = SURFACE_SIDE_STYLE('',(#306414)); +#306414 = SURFACE_STYLE_FILL_AREA(#306415); +#306415 = FILL_AREA_STYLE('',(#306416)); +#306416 = FILL_AREA_STYLE_COLOUR('',#270441); +#306417 = STYLED_ITEM('color',(#306418),#1296); +#306418 = PRESENTATION_STYLE_ASSIGNMENT((#306419)); +#306419 = SURFACE_STYLE_USAGE(.BOTH.,#306420); +#306420 = SURFACE_SIDE_STYLE('',(#306421)); +#306421 = SURFACE_STYLE_FILL_AREA(#306422); +#306422 = FILL_AREA_STYLE('',(#306423)); +#306423 = FILL_AREA_STYLE_COLOUR('',#270441); +#306424 = STYLED_ITEM('color',(#306425),#1313); +#306425 = PRESENTATION_STYLE_ASSIGNMENT((#306426)); +#306426 = SURFACE_STYLE_USAGE(.BOTH.,#306427); +#306427 = SURFACE_SIDE_STYLE('',(#306428)); +#306428 = SURFACE_STYLE_FILL_AREA(#306429); +#306429 = FILL_AREA_STYLE('',(#306430)); +#306430 = FILL_AREA_STYLE_COLOUR('',#306353); +#306431 = STYLED_ITEM('color',(#306432),#1330); +#306432 = PRESENTATION_STYLE_ASSIGNMENT((#306433)); +#306433 = SURFACE_STYLE_USAGE(.BOTH.,#306434); +#306434 = SURFACE_SIDE_STYLE('',(#306435)); +#306435 = SURFACE_STYLE_FILL_AREA(#306436); +#306436 = FILL_AREA_STYLE('',(#306437)); +#306437 = FILL_AREA_STYLE_COLOUR('',#306353); +#306438 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #306439),#270331); +#306439 = STYLED_ITEM('color',(#306440),#263459); +#306440 = PRESENTATION_STYLE_ASSIGNMENT((#306441)); +#306441 = SURFACE_STYLE_USAGE(.BOTH.,#306442); +#306442 = SURFACE_SIDE_STYLE('',(#306443,#306447)); +#306443 = SURFACE_STYLE_FILL_AREA(#306444); +#306444 = FILL_AREA_STYLE('',(#306445)); +#306445 = FILL_AREA_STYLE_COLOUR('',#306446); +#306446 = COLOUR_RGB('',0.679975718802,0.701410709185,0.574871009914); +#306447 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #306446,(#306448)); +#306448 = SURFACE_STYLE_TRANSPARENT(1.999998092651E-02); +#306449 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #306450),#261429); +#306450 = STYLED_ITEM('color',(#306451),#259303); +#306451 = PRESENTATION_STYLE_ASSIGNMENT((#306452)); +#306452 = SURFACE_STYLE_USAGE(.BOTH.,#306453); +#306453 = SURFACE_SIDE_STYLE('',(#306454,#306458)); +#306454 = SURFACE_STYLE_FILL_AREA(#306455); +#306455 = FILL_AREA_STYLE('',(#306456)); +#306456 = FILL_AREA_STYLE_COLOUR('',#306457); +#306457 = COLOUR_RGB('',0.313304153717,0.484529207832,0.410020903123); +#306458 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #306457,(#306459)); +#306459 = SURFACE_STYLE_TRANSPARENT(0.170000016689); +#306460 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #306461,#306468,#306475,#306482,#306489,#306496,#306503,#306510, + #306517,#306524,#306531,#306538,#306545,#306552,#306559,#306566, + #306573,#306580,#306587,#306594,#306601,#306608,#306615,#306622, + #306629,#306636,#306643,#306650,#306657,#306664,#306671,#306678, + #306685,#306692,#306699,#306706,#306713,#306720,#306727,#306734, + #306741,#306748,#306755,#306762,#306769,#306776,#306783,#306790, + #306797,#306804,#306811,#306818,#306825,#306832,#306839,#306846, + #306853,#306860,#306867,#306874,#306881,#306888,#306895,#306902, + #306909,#306916,#306923,#306930,#306937,#306944,#306951,#306958, + #306965,#306972,#306979,#306986),#55982); +#306461 = STYLED_ITEM('color',(#306462),#53878); +#306462 = PRESENTATION_STYLE_ASSIGNMENT((#306463)); +#306463 = SURFACE_STYLE_USAGE(.BOTH.,#306464); +#306464 = SURFACE_SIDE_STYLE('',(#306465)); +#306465 = SURFACE_STYLE_FILL_AREA(#306466); +#306466 = FILL_AREA_STYLE('',(#306467)); +#306467 = FILL_AREA_STYLE_COLOUR('',#270350); +#306468 = STYLED_ITEM('color',(#306469),#53918); +#306469 = PRESENTATION_STYLE_ASSIGNMENT((#306470)); +#306470 = SURFACE_STYLE_USAGE(.BOTH.,#306471); +#306471 = SURFACE_SIDE_STYLE('',(#306472)); +#306472 = SURFACE_STYLE_FILL_AREA(#306473); +#306473 = FILL_AREA_STYLE('',(#306474)); +#306474 = FILL_AREA_STYLE_COLOUR('',#270350); +#306475 = STYLED_ITEM('color',(#306476),#53949); +#306476 = PRESENTATION_STYLE_ASSIGNMENT((#306477)); +#306477 = SURFACE_STYLE_USAGE(.BOTH.,#306478); +#306478 = SURFACE_SIDE_STYLE('',(#306479)); +#306479 = SURFACE_STYLE_FILL_AREA(#306480); +#306480 = FILL_AREA_STYLE('',(#306481)); +#306481 = FILL_AREA_STYLE_COLOUR('',#270350); +#306482 = STYLED_ITEM('color',(#306483),#53980); +#306483 = PRESENTATION_STYLE_ASSIGNMENT((#306484)); +#306484 = SURFACE_STYLE_USAGE(.BOTH.,#306485); +#306485 = SURFACE_SIDE_STYLE('',(#306486)); +#306486 = SURFACE_STYLE_FILL_AREA(#306487); +#306487 = FILL_AREA_STYLE('',(#306488)); +#306488 = FILL_AREA_STYLE_COLOUR('',#270350); +#306489 = STYLED_ITEM('color',(#306490),#54227); +#306490 = PRESENTATION_STYLE_ASSIGNMENT((#306491)); +#306491 = SURFACE_STYLE_USAGE(.BOTH.,#306492); +#306492 = SURFACE_SIDE_STYLE('',(#306493)); +#306493 = SURFACE_STYLE_FILL_AREA(#306494); +#306494 = FILL_AREA_STYLE('',(#306495)); +#306495 = FILL_AREA_STYLE_COLOUR('',#270350); +#306496 = STYLED_ITEM('color',(#306497),#54474); +#306497 = PRESENTATION_STYLE_ASSIGNMENT((#306498)); +#306498 = SURFACE_STYLE_USAGE(.BOTH.,#306499); +#306499 = SURFACE_SIDE_STYLE('',(#306500)); +#306500 = SURFACE_STYLE_FILL_AREA(#306501); +#306501 = FILL_AREA_STYLE('',(#306502)); +#306502 = FILL_AREA_STYLE_COLOUR('',#270350); +#306503 = STYLED_ITEM('color',(#306504),#54491); +#306504 = PRESENTATION_STYLE_ASSIGNMENT((#306505)); +#306505 = SURFACE_STYLE_USAGE(.BOTH.,#306506); +#306506 = SURFACE_SIDE_STYLE('',(#306507)); +#306507 = SURFACE_STYLE_FILL_AREA(#306508); +#306508 = FILL_AREA_STYLE('',(#306509)); +#306509 = FILL_AREA_STYLE_COLOUR('',#270350); +#306510 = STYLED_ITEM('color',(#306511),#54508); +#306511 = PRESENTATION_STYLE_ASSIGNMENT((#306512)); +#306512 = SURFACE_STYLE_USAGE(.BOTH.,#306513); +#306513 = SURFACE_SIDE_STYLE('',(#306514)); +#306514 = SURFACE_STYLE_FILL_AREA(#306515); +#306515 = FILL_AREA_STYLE('',(#306516)); +#306516 = FILL_AREA_STYLE_COLOUR('',#270350); +#306517 = STYLED_ITEM('color',(#306518),#54525); +#306518 = PRESENTATION_STYLE_ASSIGNMENT((#306519)); +#306519 = SURFACE_STYLE_USAGE(.BOTH.,#306520); +#306520 = SURFACE_SIDE_STYLE('',(#306521)); +#306521 = SURFACE_STYLE_FILL_AREA(#306522); +#306522 = FILL_AREA_STYLE('',(#306523)); +#306523 = FILL_AREA_STYLE_COLOUR('',#270350); +#306524 = STYLED_ITEM('color',(#306525),#54542); +#306525 = PRESENTATION_STYLE_ASSIGNMENT((#306526)); +#306526 = SURFACE_STYLE_USAGE(.BOTH.,#306527); +#306527 = SURFACE_SIDE_STYLE('',(#306528)); +#306528 = SURFACE_STYLE_FILL_AREA(#306529); +#306529 = FILL_AREA_STYLE('',(#306530)); +#306530 = FILL_AREA_STYLE_COLOUR('',#270350); +#306531 = STYLED_ITEM('color',(#306532),#54559); +#306532 = PRESENTATION_STYLE_ASSIGNMENT((#306533)); +#306533 = SURFACE_STYLE_USAGE(.BOTH.,#306534); +#306534 = SURFACE_SIDE_STYLE('',(#306535)); +#306535 = SURFACE_STYLE_FILL_AREA(#306536); +#306536 = FILL_AREA_STYLE('',(#306537)); +#306537 = FILL_AREA_STYLE_COLOUR('',#270350); +#306538 = STYLED_ITEM('color',(#306539),#54576); +#306539 = PRESENTATION_STYLE_ASSIGNMENT((#306540)); +#306540 = SURFACE_STYLE_USAGE(.BOTH.,#306541); +#306541 = SURFACE_SIDE_STYLE('',(#306542)); +#306542 = SURFACE_STYLE_FILL_AREA(#306543); +#306543 = FILL_AREA_STYLE('',(#306544)); +#306544 = FILL_AREA_STYLE_COLOUR('',#270350); +#306545 = STYLED_ITEM('color',(#306546),#54593); +#306546 = PRESENTATION_STYLE_ASSIGNMENT((#306547)); +#306547 = SURFACE_STYLE_USAGE(.BOTH.,#306548); +#306548 = SURFACE_SIDE_STYLE('',(#306549)); +#306549 = SURFACE_STYLE_FILL_AREA(#306550); +#306550 = FILL_AREA_STYLE('',(#306551)); +#306551 = FILL_AREA_STYLE_COLOUR('',#270350); +#306552 = STYLED_ITEM('color',(#306553),#54610); +#306553 = PRESENTATION_STYLE_ASSIGNMENT((#306554)); +#306554 = SURFACE_STYLE_USAGE(.BOTH.,#306555); +#306555 = SURFACE_SIDE_STYLE('',(#306556)); +#306556 = SURFACE_STYLE_FILL_AREA(#306557); +#306557 = FILL_AREA_STYLE('',(#306558)); +#306558 = FILL_AREA_STYLE_COLOUR('',#270350); +#306559 = STYLED_ITEM('color',(#306560),#54627); +#306560 = PRESENTATION_STYLE_ASSIGNMENT((#306561)); +#306561 = SURFACE_STYLE_USAGE(.BOTH.,#306562); +#306562 = SURFACE_SIDE_STYLE('',(#306563)); +#306563 = SURFACE_STYLE_FILL_AREA(#306564); +#306564 = FILL_AREA_STYLE('',(#306565)); +#306565 = FILL_AREA_STYLE_COLOUR('',#270350); +#306566 = STYLED_ITEM('color',(#306567),#54644); +#306567 = PRESENTATION_STYLE_ASSIGNMENT((#306568)); +#306568 = SURFACE_STYLE_USAGE(.BOTH.,#306569); +#306569 = SURFACE_SIDE_STYLE('',(#306570)); +#306570 = SURFACE_STYLE_FILL_AREA(#306571); +#306571 = FILL_AREA_STYLE('',(#306572)); +#306572 = FILL_AREA_STYLE_COLOUR('',#270350); +#306573 = STYLED_ITEM('color',(#306574),#54661); +#306574 = PRESENTATION_STYLE_ASSIGNMENT((#306575)); +#306575 = SURFACE_STYLE_USAGE(.BOTH.,#306576); +#306576 = SURFACE_SIDE_STYLE('',(#306577)); +#306577 = SURFACE_STYLE_FILL_AREA(#306578); +#306578 = FILL_AREA_STYLE('',(#306579)); +#306579 = FILL_AREA_STYLE_COLOUR('',#270350); +#306580 = STYLED_ITEM('color',(#306581),#54678); +#306581 = PRESENTATION_STYLE_ASSIGNMENT((#306582)); +#306582 = SURFACE_STYLE_USAGE(.BOTH.,#306583); +#306583 = SURFACE_SIDE_STYLE('',(#306584)); +#306584 = SURFACE_STYLE_FILL_AREA(#306585); +#306585 = FILL_AREA_STYLE('',(#306586)); +#306586 = FILL_AREA_STYLE_COLOUR('',#270350); +#306587 = STYLED_ITEM('color',(#306588),#54695); +#306588 = PRESENTATION_STYLE_ASSIGNMENT((#306589)); +#306589 = SURFACE_STYLE_USAGE(.BOTH.,#306590); +#306590 = SURFACE_SIDE_STYLE('',(#306591)); +#306591 = SURFACE_STYLE_FILL_AREA(#306592); +#306592 = FILL_AREA_STYLE('',(#306593)); +#306593 = FILL_AREA_STYLE_COLOUR('',#270350); +#306594 = STYLED_ITEM('color',(#306595),#54712); +#306595 = PRESENTATION_STYLE_ASSIGNMENT((#306596)); +#306596 = SURFACE_STYLE_USAGE(.BOTH.,#306597); +#306597 = SURFACE_SIDE_STYLE('',(#306598)); +#306598 = SURFACE_STYLE_FILL_AREA(#306599); +#306599 = FILL_AREA_STYLE('',(#306600)); +#306600 = FILL_AREA_STYLE_COLOUR('',#270350); +#306601 = STYLED_ITEM('color',(#306602),#54729); +#306602 = PRESENTATION_STYLE_ASSIGNMENT((#306603)); +#306603 = SURFACE_STYLE_USAGE(.BOTH.,#306604); +#306604 = SURFACE_SIDE_STYLE('',(#306605)); +#306605 = SURFACE_STYLE_FILL_AREA(#306606); +#306606 = FILL_AREA_STYLE('',(#306607)); +#306607 = FILL_AREA_STYLE_COLOUR('',#270350); +#306608 = STYLED_ITEM('color',(#306609),#54746); +#306609 = PRESENTATION_STYLE_ASSIGNMENT((#306610)); +#306610 = SURFACE_STYLE_USAGE(.BOTH.,#306611); +#306611 = SURFACE_SIDE_STYLE('',(#306612)); +#306612 = SURFACE_STYLE_FILL_AREA(#306613); +#306613 = FILL_AREA_STYLE('',(#306614)); +#306614 = FILL_AREA_STYLE_COLOUR('',#270350); +#306615 = STYLED_ITEM('color',(#306616),#54758); +#306616 = PRESENTATION_STYLE_ASSIGNMENT((#306617)); +#306617 = SURFACE_STYLE_USAGE(.BOTH.,#306618); +#306618 = SURFACE_SIDE_STYLE('',(#306619)); +#306619 = SURFACE_STYLE_FILL_AREA(#306620); +#306620 = FILL_AREA_STYLE('',(#306621)); +#306621 = FILL_AREA_STYLE_COLOUR('',#285989); +#306622 = STYLED_ITEM('color',(#306623),#54789); +#306623 = PRESENTATION_STYLE_ASSIGNMENT((#306624)); +#306624 = SURFACE_STYLE_USAGE(.BOTH.,#306625); +#306625 = SURFACE_SIDE_STYLE('',(#306626)); +#306626 = SURFACE_STYLE_FILL_AREA(#306627); +#306627 = FILL_AREA_STYLE('',(#306628)); +#306628 = FILL_AREA_STYLE_COLOUR('',#285989); +#306629 = STYLED_ITEM('color',(#306630),#54813); +#306630 = PRESENTATION_STYLE_ASSIGNMENT((#306631)); +#306631 = SURFACE_STYLE_USAGE(.BOTH.,#306632); +#306632 = SURFACE_SIDE_STYLE('',(#306633)); +#306633 = SURFACE_STYLE_FILL_AREA(#306634); +#306634 = FILL_AREA_STYLE('',(#306635)); +#306635 = FILL_AREA_STYLE_COLOUR('',#285989); +#306636 = STYLED_ITEM('color',(#306637),#54837); +#306637 = PRESENTATION_STYLE_ASSIGNMENT((#306638)); +#306638 = SURFACE_STYLE_USAGE(.BOTH.,#306639); +#306639 = SURFACE_SIDE_STYLE('',(#306640)); +#306640 = SURFACE_STYLE_FILL_AREA(#306641); +#306641 = FILL_AREA_STYLE('',(#306642)); +#306642 = FILL_AREA_STYLE_COLOUR('',#285989); +#306643 = STYLED_ITEM('color',(#306644),#54854); +#306644 = PRESENTATION_STYLE_ASSIGNMENT((#306645)); +#306645 = SURFACE_STYLE_USAGE(.BOTH.,#306646); +#306646 = SURFACE_SIDE_STYLE('',(#306647)); +#306647 = SURFACE_STYLE_FILL_AREA(#306648); +#306648 = FILL_AREA_STYLE('',(#306649)); +#306649 = FILL_AREA_STYLE_COLOUR('',#285989); +#306650 = STYLED_ITEM('color',(#306651),#54885); +#306651 = PRESENTATION_STYLE_ASSIGNMENT((#306652)); +#306652 = SURFACE_STYLE_USAGE(.BOTH.,#306653); +#306653 = SURFACE_SIDE_STYLE('',(#306654)); +#306654 = SURFACE_STYLE_FILL_AREA(#306655); +#306655 = FILL_AREA_STYLE('',(#306656)); +#306656 = FILL_AREA_STYLE_COLOUR('',#285989); +#306657 = STYLED_ITEM('color',(#306658),#54909); +#306658 = PRESENTATION_STYLE_ASSIGNMENT((#306659)); +#306659 = SURFACE_STYLE_USAGE(.BOTH.,#306660); +#306660 = SURFACE_SIDE_STYLE('',(#306661)); +#306661 = SURFACE_STYLE_FILL_AREA(#306662); +#306662 = FILL_AREA_STYLE('',(#306663)); +#306663 = FILL_AREA_STYLE_COLOUR('',#285989); +#306664 = STYLED_ITEM('color',(#306665),#54933); +#306665 = PRESENTATION_STYLE_ASSIGNMENT((#306666)); +#306666 = SURFACE_STYLE_USAGE(.BOTH.,#306667); +#306667 = SURFACE_SIDE_STYLE('',(#306668)); +#306668 = SURFACE_STYLE_FILL_AREA(#306669); +#306669 = FILL_AREA_STYLE('',(#306670)); +#306670 = FILL_AREA_STYLE_COLOUR('',#285989); +#306671 = STYLED_ITEM('color',(#306672),#54950); +#306672 = PRESENTATION_STYLE_ASSIGNMENT((#306673)); +#306673 = SURFACE_STYLE_USAGE(.BOTH.,#306674); +#306674 = SURFACE_SIDE_STYLE('',(#306675)); +#306675 = SURFACE_STYLE_FILL_AREA(#306676); +#306676 = FILL_AREA_STYLE('',(#306677)); +#306677 = FILL_AREA_STYLE_COLOUR('',#285989); +#306678 = STYLED_ITEM('color',(#306679),#54981); +#306679 = PRESENTATION_STYLE_ASSIGNMENT((#306680)); +#306680 = SURFACE_STYLE_USAGE(.BOTH.,#306681); +#306681 = SURFACE_SIDE_STYLE('',(#306682)); +#306682 = SURFACE_STYLE_FILL_AREA(#306683); +#306683 = FILL_AREA_STYLE('',(#306684)); +#306684 = FILL_AREA_STYLE_COLOUR('',#285989); +#306685 = STYLED_ITEM('color',(#306686),#55005); +#306686 = PRESENTATION_STYLE_ASSIGNMENT((#306687)); +#306687 = SURFACE_STYLE_USAGE(.BOTH.,#306688); +#306688 = SURFACE_SIDE_STYLE('',(#306689)); +#306689 = SURFACE_STYLE_FILL_AREA(#306690); +#306690 = FILL_AREA_STYLE('',(#306691)); +#306691 = FILL_AREA_STYLE_COLOUR('',#285989); +#306692 = STYLED_ITEM('color',(#306693),#55029); +#306693 = PRESENTATION_STYLE_ASSIGNMENT((#306694)); +#306694 = SURFACE_STYLE_USAGE(.BOTH.,#306695); +#306695 = SURFACE_SIDE_STYLE('',(#306696)); +#306696 = SURFACE_STYLE_FILL_AREA(#306697); +#306697 = FILL_AREA_STYLE('',(#306698)); +#306698 = FILL_AREA_STYLE_COLOUR('',#285989); +#306699 = STYLED_ITEM('color',(#306700),#55046); +#306700 = PRESENTATION_STYLE_ASSIGNMENT((#306701)); +#306701 = SURFACE_STYLE_USAGE(.BOTH.,#306702); +#306702 = SURFACE_SIDE_STYLE('',(#306703)); +#306703 = SURFACE_STYLE_FILL_AREA(#306704); +#306704 = FILL_AREA_STYLE('',(#306705)); +#306705 = FILL_AREA_STYLE_COLOUR('',#285989); +#306706 = STYLED_ITEM('color',(#306707),#55077); +#306707 = PRESENTATION_STYLE_ASSIGNMENT((#306708)); +#306708 = SURFACE_STYLE_USAGE(.BOTH.,#306709); +#306709 = SURFACE_SIDE_STYLE('',(#306710)); +#306710 = SURFACE_STYLE_FILL_AREA(#306711); +#306711 = FILL_AREA_STYLE('',(#306712)); +#306712 = FILL_AREA_STYLE_COLOUR('',#285989); +#306713 = STYLED_ITEM('color',(#306714),#55101); +#306714 = PRESENTATION_STYLE_ASSIGNMENT((#306715)); +#306715 = SURFACE_STYLE_USAGE(.BOTH.,#306716); +#306716 = SURFACE_SIDE_STYLE('',(#306717)); +#306717 = SURFACE_STYLE_FILL_AREA(#306718); +#306718 = FILL_AREA_STYLE('',(#306719)); +#306719 = FILL_AREA_STYLE_COLOUR('',#285989); +#306720 = STYLED_ITEM('color',(#306721),#55125); +#306721 = PRESENTATION_STYLE_ASSIGNMENT((#306722)); +#306722 = SURFACE_STYLE_USAGE(.BOTH.,#306723); +#306723 = SURFACE_SIDE_STYLE('',(#306724)); +#306724 = SURFACE_STYLE_FILL_AREA(#306725); +#306725 = FILL_AREA_STYLE('',(#306726)); +#306726 = FILL_AREA_STYLE_COLOUR('',#285989); +#306727 = STYLED_ITEM('color',(#306728),#55142); +#306728 = PRESENTATION_STYLE_ASSIGNMENT((#306729)); +#306729 = SURFACE_STYLE_USAGE(.BOTH.,#306730); +#306730 = SURFACE_SIDE_STYLE('',(#306731)); +#306731 = SURFACE_STYLE_FILL_AREA(#306732); +#306732 = FILL_AREA_STYLE('',(#306733)); +#306733 = FILL_AREA_STYLE_COLOUR('',#285989); +#306734 = STYLED_ITEM('color',(#306735),#55173); +#306735 = PRESENTATION_STYLE_ASSIGNMENT((#306736)); +#306736 = SURFACE_STYLE_USAGE(.BOTH.,#306737); +#306737 = SURFACE_SIDE_STYLE('',(#306738)); +#306738 = SURFACE_STYLE_FILL_AREA(#306739); +#306739 = FILL_AREA_STYLE('',(#306740)); +#306740 = FILL_AREA_STYLE_COLOUR('',#285989); +#306741 = STYLED_ITEM('color',(#306742),#55197); +#306742 = PRESENTATION_STYLE_ASSIGNMENT((#306743)); +#306743 = SURFACE_STYLE_USAGE(.BOTH.,#306744); +#306744 = SURFACE_SIDE_STYLE('',(#306745)); +#306745 = SURFACE_STYLE_FILL_AREA(#306746); +#306746 = FILL_AREA_STYLE('',(#306747)); +#306747 = FILL_AREA_STYLE_COLOUR('',#285989); +#306748 = STYLED_ITEM('color',(#306749),#55221); +#306749 = PRESENTATION_STYLE_ASSIGNMENT((#306750)); +#306750 = SURFACE_STYLE_USAGE(.BOTH.,#306751); +#306751 = SURFACE_SIDE_STYLE('',(#306752)); +#306752 = SURFACE_STYLE_FILL_AREA(#306753); +#306753 = FILL_AREA_STYLE('',(#306754)); +#306754 = FILL_AREA_STYLE_COLOUR('',#285989); +#306755 = STYLED_ITEM('color',(#306756),#55238); +#306756 = PRESENTATION_STYLE_ASSIGNMENT((#306757)); +#306757 = SURFACE_STYLE_USAGE(.BOTH.,#306758); +#306758 = SURFACE_SIDE_STYLE('',(#306759)); +#306759 = SURFACE_STYLE_FILL_AREA(#306760); +#306760 = FILL_AREA_STYLE('',(#306761)); +#306761 = FILL_AREA_STYLE_COLOUR('',#285989); +#306762 = STYLED_ITEM('color',(#306763),#55269); +#306763 = PRESENTATION_STYLE_ASSIGNMENT((#306764)); +#306764 = SURFACE_STYLE_USAGE(.BOTH.,#306765); +#306765 = SURFACE_SIDE_STYLE('',(#306766)); +#306766 = SURFACE_STYLE_FILL_AREA(#306767); +#306767 = FILL_AREA_STYLE('',(#306768)); +#306768 = FILL_AREA_STYLE_COLOUR('',#285989); +#306769 = STYLED_ITEM('color',(#306770),#55293); +#306770 = PRESENTATION_STYLE_ASSIGNMENT((#306771)); +#306771 = SURFACE_STYLE_USAGE(.BOTH.,#306772); +#306772 = SURFACE_SIDE_STYLE('',(#306773)); +#306773 = SURFACE_STYLE_FILL_AREA(#306774); +#306774 = FILL_AREA_STYLE('',(#306775)); +#306775 = FILL_AREA_STYLE_COLOUR('',#285989); +#306776 = STYLED_ITEM('color',(#306777),#55317); +#306777 = PRESENTATION_STYLE_ASSIGNMENT((#306778)); +#306778 = SURFACE_STYLE_USAGE(.BOTH.,#306779); +#306779 = SURFACE_SIDE_STYLE('',(#306780)); +#306780 = SURFACE_STYLE_FILL_AREA(#306781); +#306781 = FILL_AREA_STYLE('',(#306782)); +#306782 = FILL_AREA_STYLE_COLOUR('',#285989); +#306783 = STYLED_ITEM('color',(#306784),#55334); +#306784 = PRESENTATION_STYLE_ASSIGNMENT((#306785)); +#306785 = SURFACE_STYLE_USAGE(.BOTH.,#306786); +#306786 = SURFACE_SIDE_STYLE('',(#306787)); +#306787 = SURFACE_STYLE_FILL_AREA(#306788); +#306788 = FILL_AREA_STYLE('',(#306789)); +#306789 = FILL_AREA_STYLE_COLOUR('',#285989); +#306790 = STYLED_ITEM('color',(#306791),#55365); +#306791 = PRESENTATION_STYLE_ASSIGNMENT((#306792)); +#306792 = SURFACE_STYLE_USAGE(.BOTH.,#306793); +#306793 = SURFACE_SIDE_STYLE('',(#306794)); +#306794 = SURFACE_STYLE_FILL_AREA(#306795); +#306795 = FILL_AREA_STYLE('',(#306796)); +#306796 = FILL_AREA_STYLE_COLOUR('',#285989); +#306797 = STYLED_ITEM('color',(#306798),#55389); +#306798 = PRESENTATION_STYLE_ASSIGNMENT((#306799)); +#306799 = SURFACE_STYLE_USAGE(.BOTH.,#306800); +#306800 = SURFACE_SIDE_STYLE('',(#306801)); +#306801 = SURFACE_STYLE_FILL_AREA(#306802); +#306802 = FILL_AREA_STYLE('',(#306803)); +#306803 = FILL_AREA_STYLE_COLOUR('',#285989); +#306804 = STYLED_ITEM('color',(#306805),#55413); +#306805 = PRESENTATION_STYLE_ASSIGNMENT((#306806)); +#306806 = SURFACE_STYLE_USAGE(.BOTH.,#306807); +#306807 = SURFACE_SIDE_STYLE('',(#306808)); +#306808 = SURFACE_STYLE_FILL_AREA(#306809); +#306809 = FILL_AREA_STYLE('',(#306810)); +#306810 = FILL_AREA_STYLE_COLOUR('',#285989); +#306811 = STYLED_ITEM('color',(#306812),#55430); +#306812 = PRESENTATION_STYLE_ASSIGNMENT((#306813)); +#306813 = SURFACE_STYLE_USAGE(.BOTH.,#306814); +#306814 = SURFACE_SIDE_STYLE('',(#306815)); +#306815 = SURFACE_STYLE_FILL_AREA(#306816); +#306816 = FILL_AREA_STYLE('',(#306817)); +#306817 = FILL_AREA_STYLE_COLOUR('',#285989); +#306818 = STYLED_ITEM('color',(#306819),#55461); +#306819 = PRESENTATION_STYLE_ASSIGNMENT((#306820)); +#306820 = SURFACE_STYLE_USAGE(.BOTH.,#306821); +#306821 = SURFACE_SIDE_STYLE('',(#306822)); +#306822 = SURFACE_STYLE_FILL_AREA(#306823); +#306823 = FILL_AREA_STYLE('',(#306824)); +#306824 = FILL_AREA_STYLE_COLOUR('',#285989); +#306825 = STYLED_ITEM('color',(#306826),#55485); +#306826 = PRESENTATION_STYLE_ASSIGNMENT((#306827)); +#306827 = SURFACE_STYLE_USAGE(.BOTH.,#306828); +#306828 = SURFACE_SIDE_STYLE('',(#306829)); +#306829 = SURFACE_STYLE_FILL_AREA(#306830); +#306830 = FILL_AREA_STYLE('',(#306831)); +#306831 = FILL_AREA_STYLE_COLOUR('',#285989); +#306832 = STYLED_ITEM('color',(#306833),#55509); +#306833 = PRESENTATION_STYLE_ASSIGNMENT((#306834)); +#306834 = SURFACE_STYLE_USAGE(.BOTH.,#306835); +#306835 = SURFACE_SIDE_STYLE('',(#306836)); +#306836 = SURFACE_STYLE_FILL_AREA(#306837); +#306837 = FILL_AREA_STYLE('',(#306838)); +#306838 = FILL_AREA_STYLE_COLOUR('',#285989); +#306839 = STYLED_ITEM('color',(#306840),#55526); +#306840 = PRESENTATION_STYLE_ASSIGNMENT((#306841)); +#306841 = SURFACE_STYLE_USAGE(.BOTH.,#306842); +#306842 = SURFACE_SIDE_STYLE('',(#306843)); +#306843 = SURFACE_STYLE_FILL_AREA(#306844); +#306844 = FILL_AREA_STYLE('',(#306845)); +#306845 = FILL_AREA_STYLE_COLOUR('',#285989); +#306846 = STYLED_ITEM('color',(#306847),#55557); +#306847 = PRESENTATION_STYLE_ASSIGNMENT((#306848)); +#306848 = SURFACE_STYLE_USAGE(.BOTH.,#306849); +#306849 = SURFACE_SIDE_STYLE('',(#306850)); +#306850 = SURFACE_STYLE_FILL_AREA(#306851); +#306851 = FILL_AREA_STYLE('',(#306852)); +#306852 = FILL_AREA_STYLE_COLOUR('',#285989); +#306853 = STYLED_ITEM('color',(#306854),#55581); +#306854 = PRESENTATION_STYLE_ASSIGNMENT((#306855)); +#306855 = SURFACE_STYLE_USAGE(.BOTH.,#306856); +#306856 = SURFACE_SIDE_STYLE('',(#306857)); +#306857 = SURFACE_STYLE_FILL_AREA(#306858); +#306858 = FILL_AREA_STYLE('',(#306859)); +#306859 = FILL_AREA_STYLE_COLOUR('',#285989); +#306860 = STYLED_ITEM('color',(#306861),#55605); +#306861 = PRESENTATION_STYLE_ASSIGNMENT((#306862)); +#306862 = SURFACE_STYLE_USAGE(.BOTH.,#306863); +#306863 = SURFACE_SIDE_STYLE('',(#306864)); +#306864 = SURFACE_STYLE_FILL_AREA(#306865); +#306865 = FILL_AREA_STYLE('',(#306866)); +#306866 = FILL_AREA_STYLE_COLOUR('',#285989); +#306867 = STYLED_ITEM('color',(#306868),#55622); +#306868 = PRESENTATION_STYLE_ASSIGNMENT((#306869)); +#306869 = SURFACE_STYLE_USAGE(.BOTH.,#306870); +#306870 = SURFACE_SIDE_STYLE('',(#306871)); +#306871 = SURFACE_STYLE_FILL_AREA(#306872); +#306872 = FILL_AREA_STYLE('',(#306873)); +#306873 = FILL_AREA_STYLE_COLOUR('',#285989); +#306874 = STYLED_ITEM('color',(#306875),#55653); +#306875 = PRESENTATION_STYLE_ASSIGNMENT((#306876)); +#306876 = SURFACE_STYLE_USAGE(.BOTH.,#306877); +#306877 = SURFACE_SIDE_STYLE('',(#306878)); +#306878 = SURFACE_STYLE_FILL_AREA(#306879); +#306879 = FILL_AREA_STYLE('',(#306880)); +#306880 = FILL_AREA_STYLE_COLOUR('',#285989); +#306881 = STYLED_ITEM('color',(#306882),#55677); +#306882 = PRESENTATION_STYLE_ASSIGNMENT((#306883)); +#306883 = SURFACE_STYLE_USAGE(.BOTH.,#306884); +#306884 = SURFACE_SIDE_STYLE('',(#306885)); +#306885 = SURFACE_STYLE_FILL_AREA(#306886); +#306886 = FILL_AREA_STYLE('',(#306887)); +#306887 = FILL_AREA_STYLE_COLOUR('',#285989); +#306888 = STYLED_ITEM('color',(#306889),#55701); +#306889 = PRESENTATION_STYLE_ASSIGNMENT((#306890)); +#306890 = SURFACE_STYLE_USAGE(.BOTH.,#306891); +#306891 = SURFACE_SIDE_STYLE('',(#306892)); +#306892 = SURFACE_STYLE_FILL_AREA(#306893); +#306893 = FILL_AREA_STYLE('',(#306894)); +#306894 = FILL_AREA_STYLE_COLOUR('',#285989); +#306895 = STYLED_ITEM('color',(#306896),#55718); +#306896 = PRESENTATION_STYLE_ASSIGNMENT((#306897)); +#306897 = SURFACE_STYLE_USAGE(.BOTH.,#306898); +#306898 = SURFACE_SIDE_STYLE('',(#306899)); +#306899 = SURFACE_STYLE_FILL_AREA(#306900); +#306900 = FILL_AREA_STYLE('',(#306901)); +#306901 = FILL_AREA_STYLE_COLOUR('',#285989); +#306902 = STYLED_ITEM('color',(#306903),#55749); +#306903 = PRESENTATION_STYLE_ASSIGNMENT((#306904)); +#306904 = SURFACE_STYLE_USAGE(.BOTH.,#306905); +#306905 = SURFACE_SIDE_STYLE('',(#306906)); +#306906 = SURFACE_STYLE_FILL_AREA(#306907); +#306907 = FILL_AREA_STYLE('',(#306908)); +#306908 = FILL_AREA_STYLE_COLOUR('',#285989); +#306909 = STYLED_ITEM('color',(#306910),#55773); +#306910 = PRESENTATION_STYLE_ASSIGNMENT((#306911)); +#306911 = SURFACE_STYLE_USAGE(.BOTH.,#306912); +#306912 = SURFACE_SIDE_STYLE('',(#306913)); +#306913 = SURFACE_STYLE_FILL_AREA(#306914); +#306914 = FILL_AREA_STYLE('',(#306915)); +#306915 = FILL_AREA_STYLE_COLOUR('',#285989); +#306916 = STYLED_ITEM('color',(#306917),#55797); +#306917 = PRESENTATION_STYLE_ASSIGNMENT((#306918)); +#306918 = SURFACE_STYLE_USAGE(.BOTH.,#306919); +#306919 = SURFACE_SIDE_STYLE('',(#306920)); +#306920 = SURFACE_STYLE_FILL_AREA(#306921); +#306921 = FILL_AREA_STYLE('',(#306922)); +#306922 = FILL_AREA_STYLE_COLOUR('',#285989); +#306923 = STYLED_ITEM('color',(#306924),#55814); +#306924 = PRESENTATION_STYLE_ASSIGNMENT((#306925)); +#306925 = SURFACE_STYLE_USAGE(.BOTH.,#306926); +#306926 = SURFACE_SIDE_STYLE('',(#306927)); +#306927 = SURFACE_STYLE_FILL_AREA(#306928); +#306928 = FILL_AREA_STYLE('',(#306929)); +#306929 = FILL_AREA_STYLE_COLOUR('',#285989); +#306930 = STYLED_ITEM('color',(#306931),#55845); +#306931 = PRESENTATION_STYLE_ASSIGNMENT((#306932)); +#306932 = SURFACE_STYLE_USAGE(.BOTH.,#306933); +#306933 = SURFACE_SIDE_STYLE('',(#306934)); +#306934 = SURFACE_STYLE_FILL_AREA(#306935); +#306935 = FILL_AREA_STYLE('',(#306936)); +#306936 = FILL_AREA_STYLE_COLOUR('',#285989); +#306937 = STYLED_ITEM('color',(#306938),#55869); +#306938 = PRESENTATION_STYLE_ASSIGNMENT((#306939)); +#306939 = SURFACE_STYLE_USAGE(.BOTH.,#306940); +#306940 = SURFACE_SIDE_STYLE('',(#306941)); +#306941 = SURFACE_STYLE_FILL_AREA(#306942); +#306942 = FILL_AREA_STYLE('',(#306943)); +#306943 = FILL_AREA_STYLE_COLOUR('',#285989); +#306944 = STYLED_ITEM('color',(#306945),#55893); +#306945 = PRESENTATION_STYLE_ASSIGNMENT((#306946)); +#306946 = SURFACE_STYLE_USAGE(.BOTH.,#306947); +#306947 = SURFACE_SIDE_STYLE('',(#306948)); +#306948 = SURFACE_STYLE_FILL_AREA(#306949); +#306949 = FILL_AREA_STYLE('',(#306950)); +#306950 = FILL_AREA_STYLE_COLOUR('',#285989); +#306951 = STYLED_ITEM('color',(#306952),#55910); +#306952 = PRESENTATION_STYLE_ASSIGNMENT((#306953)); +#306953 = SURFACE_STYLE_USAGE(.BOTH.,#306954); +#306954 = SURFACE_SIDE_STYLE('',(#306955)); +#306955 = SURFACE_STYLE_FILL_AREA(#306956); +#306956 = FILL_AREA_STYLE('',(#306957)); +#306957 = FILL_AREA_STYLE_COLOUR('',#285989); +#306958 = STYLED_ITEM('color',(#306959),#55922); +#306959 = PRESENTATION_STYLE_ASSIGNMENT((#306960)); +#306960 = SURFACE_STYLE_USAGE(.BOTH.,#306961); +#306961 = SURFACE_SIDE_STYLE('',(#306962)); +#306962 = SURFACE_STYLE_FILL_AREA(#306963); +#306963 = FILL_AREA_STYLE('',(#306964)); +#306964 = FILL_AREA_STYLE_COLOUR('',#285989); +#306965 = STYLED_ITEM('color',(#306966),#55934); +#306966 = PRESENTATION_STYLE_ASSIGNMENT((#306967)); +#306967 = SURFACE_STYLE_USAGE(.BOTH.,#306968); +#306968 = SURFACE_SIDE_STYLE('',(#306969)); +#306969 = SURFACE_STYLE_FILL_AREA(#306970); +#306970 = FILL_AREA_STYLE('',(#306971)); +#306971 = FILL_AREA_STYLE_COLOUR('',#285989); +#306972 = STYLED_ITEM('color',(#306973),#55946); +#306973 = PRESENTATION_STYLE_ASSIGNMENT((#306974)); +#306974 = SURFACE_STYLE_USAGE(.BOTH.,#306975); +#306975 = SURFACE_SIDE_STYLE('',(#306976)); +#306976 = SURFACE_STYLE_FILL_AREA(#306977); +#306977 = FILL_AREA_STYLE('',(#306978)); +#306978 = FILL_AREA_STYLE_COLOUR('',#285989); +#306979 = STYLED_ITEM('color',(#306980),#55958); +#306980 = PRESENTATION_STYLE_ASSIGNMENT((#306981)); +#306981 = SURFACE_STYLE_USAGE(.BOTH.,#306982); +#306982 = SURFACE_SIDE_STYLE('',(#306983)); +#306983 = SURFACE_STYLE_FILL_AREA(#306984); +#306984 = FILL_AREA_STYLE('',(#306985)); +#306985 = FILL_AREA_STYLE_COLOUR('',#285989); +#306986 = STYLED_ITEM('color',(#306987),#55970); +#306987 = PRESENTATION_STYLE_ASSIGNMENT((#306988)); +#306988 = SURFACE_STYLE_USAGE(.BOTH.,#306989); +#306989 = SURFACE_SIDE_STYLE('',(#306990)); +#306990 = SURFACE_STYLE_FILL_AREA(#306991); +#306991 = FILL_AREA_STYLE('',(#306992)); +#306992 = FILL_AREA_STYLE_COLOUR('',#285989); +#306993 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #306994,#307003,#307012,#307021,#307030,#307039,#307048,#307057, + #307066,#307075,#307084,#307093,#307102,#307111,#307120,#307129, + #307138,#307147,#307156,#307165,#307174,#307183,#307192,#307201, + #307210,#307219,#307228,#307237,#307246,#307255,#307264,#307273, + #307282,#307291,#307300,#307309,#307318,#307327,#307336,#307345, + #307354,#307363,#307372,#307381,#307390,#307399,#307408,#307417, + #307426,#307435,#307444,#307453,#307462,#307471,#307480,#307489, + #307498,#307507,#307516),#103350); +#306994 = STYLED_ITEM('color',(#306995),#101664); +#306995 = PRESENTATION_STYLE_ASSIGNMENT((#306996,#307001)); +#306996 = SURFACE_STYLE_USAGE(.BOTH.,#306997); +#306997 = SURFACE_SIDE_STYLE('',(#306998)); +#306998 = SURFACE_STYLE_FILL_AREA(#306999); +#306999 = FILL_AREA_STYLE('',(#307000)); +#307000 = FILL_AREA_STYLE_COLOUR('',#270350); +#307001 = CURVE_STYLE('',#307002,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307003 = STYLED_ITEM('color',(#307004),#101718); +#307004 = PRESENTATION_STYLE_ASSIGNMENT((#307005,#307010)); +#307005 = SURFACE_STYLE_USAGE(.BOTH.,#307006); +#307006 = SURFACE_SIDE_STYLE('',(#307007)); +#307007 = SURFACE_STYLE_FILL_AREA(#307008); +#307008 = FILL_AREA_STYLE('',(#307009)); +#307009 = FILL_AREA_STYLE_COLOUR('',#270350); +#307010 = CURVE_STYLE('',#307011,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307012 = STYLED_ITEM('color',(#307013),#101781); +#307013 = PRESENTATION_STYLE_ASSIGNMENT((#307014,#307019)); +#307014 = SURFACE_STYLE_USAGE(.BOTH.,#307015); +#307015 = SURFACE_SIDE_STYLE('',(#307016)); +#307016 = SURFACE_STYLE_FILL_AREA(#307017); +#307017 = FILL_AREA_STYLE('',(#307018)); +#307018 = FILL_AREA_STYLE_COLOUR('',#270350); +#307019 = CURVE_STYLE('',#307020,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307021 = STYLED_ITEM('color',(#307022),#101804); +#307022 = PRESENTATION_STYLE_ASSIGNMENT((#307023,#307028)); +#307023 = SURFACE_STYLE_USAGE(.BOTH.,#307024); +#307024 = SURFACE_SIDE_STYLE('',(#307025)); +#307025 = SURFACE_STYLE_FILL_AREA(#307026); +#307026 = FILL_AREA_STYLE('',(#307027)); +#307027 = FILL_AREA_STYLE_COLOUR('',#270350); +#307028 = CURVE_STYLE('',#307029,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307030 = STYLED_ITEM('color',(#307031),#101834); +#307031 = PRESENTATION_STYLE_ASSIGNMENT((#307032,#307037)); +#307032 = SURFACE_STYLE_USAGE(.BOTH.,#307033); +#307033 = SURFACE_SIDE_STYLE('',(#307034)); +#307034 = SURFACE_STYLE_FILL_AREA(#307035); +#307035 = FILL_AREA_STYLE('',(#307036)); +#307036 = FILL_AREA_STYLE_COLOUR('',#270441); +#307037 = CURVE_STYLE('',#307038,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307039 = STYLED_ITEM('color',(#307040),#101867); +#307040 = PRESENTATION_STYLE_ASSIGNMENT((#307041,#307046)); +#307041 = SURFACE_STYLE_USAGE(.BOTH.,#307042); +#307042 = SURFACE_SIDE_STYLE('',(#307043)); +#307043 = SURFACE_STYLE_FILL_AREA(#307044); +#307044 = FILL_AREA_STYLE('',(#307045)); +#307045 = FILL_AREA_STYLE_COLOUR('',#270350); +#307046 = CURVE_STYLE('',#307047,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307048 = STYLED_ITEM('color',(#307049),#101897); +#307049 = PRESENTATION_STYLE_ASSIGNMENT((#307050,#307055)); +#307050 = SURFACE_STYLE_USAGE(.BOTH.,#307051); +#307051 = SURFACE_SIDE_STYLE('',(#307052)); +#307052 = SURFACE_STYLE_FILL_AREA(#307053); +#307053 = FILL_AREA_STYLE('',(#307054)); +#307054 = FILL_AREA_STYLE_COLOUR('',#270350); +#307055 = CURVE_STYLE('',#307056,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307057 = STYLED_ITEM('color',(#307058),#101920); +#307058 = PRESENTATION_STYLE_ASSIGNMENT((#307059,#307064)); +#307059 = SURFACE_STYLE_USAGE(.BOTH.,#307060); +#307060 = SURFACE_SIDE_STYLE('',(#307061)); +#307061 = SURFACE_STYLE_FILL_AREA(#307062); +#307062 = FILL_AREA_STYLE('',(#307063)); +#307063 = FILL_AREA_STYLE_COLOUR('',#270350); +#307064 = CURVE_STYLE('',#307065,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307066 = STYLED_ITEM('color',(#307067),#101943); +#307067 = PRESENTATION_STYLE_ASSIGNMENT((#307068,#307073)); +#307068 = SURFACE_STYLE_USAGE(.BOTH.,#307069); +#307069 = SURFACE_SIDE_STYLE('',(#307070)); +#307070 = SURFACE_STYLE_FILL_AREA(#307071); +#307071 = FILL_AREA_STYLE('',(#307072)); +#307072 = FILL_AREA_STYLE_COLOUR('',#270350); +#307073 = CURVE_STYLE('',#307074,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307075 = STYLED_ITEM('color',(#307076),#101966); +#307076 = PRESENTATION_STYLE_ASSIGNMENT((#307077,#307082)); +#307077 = SURFACE_STYLE_USAGE(.BOTH.,#307078); +#307078 = SURFACE_SIDE_STYLE('',(#307079)); +#307079 = SURFACE_STYLE_FILL_AREA(#307080); +#307080 = FILL_AREA_STYLE('',(#307081)); +#307081 = FILL_AREA_STYLE_COLOUR('',#270350); +#307082 = CURVE_STYLE('',#307083,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307084 = STYLED_ITEM('color',(#307085),#101989); +#307085 = PRESENTATION_STYLE_ASSIGNMENT((#307086,#307091)); +#307086 = SURFACE_STYLE_USAGE(.BOTH.,#307087); +#307087 = SURFACE_SIDE_STYLE('',(#307088)); +#307088 = SURFACE_STYLE_FILL_AREA(#307089); +#307089 = FILL_AREA_STYLE('',(#307090)); +#307090 = FILL_AREA_STYLE_COLOUR('',#270350); +#307091 = CURVE_STYLE('',#307092,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307093 = STYLED_ITEM('color',(#307094),#102012); +#307094 = PRESENTATION_STYLE_ASSIGNMENT((#307095,#307100)); +#307095 = SURFACE_STYLE_USAGE(.BOTH.,#307096); +#307096 = SURFACE_SIDE_STYLE('',(#307097)); +#307097 = SURFACE_STYLE_FILL_AREA(#307098); +#307098 = FILL_AREA_STYLE('',(#307099)); +#307099 = FILL_AREA_STYLE_COLOUR('',#270350); +#307100 = CURVE_STYLE('',#307101,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307102 = STYLED_ITEM('color',(#307103),#102045); +#307103 = PRESENTATION_STYLE_ASSIGNMENT((#307104,#307109)); +#307104 = SURFACE_STYLE_USAGE(.BOTH.,#307105); +#307105 = SURFACE_SIDE_STYLE('',(#307106)); +#307106 = SURFACE_STYLE_FILL_AREA(#307107); +#307107 = FILL_AREA_STYLE('',(#307108)); +#307108 = FILL_AREA_STYLE_COLOUR('',#270350); +#307109 = CURVE_STYLE('',#307110,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307111 = STYLED_ITEM('color',(#307112),#102068); +#307112 = PRESENTATION_STYLE_ASSIGNMENT((#307113,#307118)); +#307113 = SURFACE_STYLE_USAGE(.BOTH.,#307114); +#307114 = SURFACE_SIDE_STYLE('',(#307115)); +#307115 = SURFACE_STYLE_FILL_AREA(#307116); +#307116 = FILL_AREA_STYLE('',(#307117)); +#307117 = FILL_AREA_STYLE_COLOUR('',#270350); +#307118 = CURVE_STYLE('',#307119,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307120 = STYLED_ITEM('color',(#307121),#102091); +#307121 = PRESENTATION_STYLE_ASSIGNMENT((#307122,#307127)); +#307122 = SURFACE_STYLE_USAGE(.BOTH.,#307123); +#307123 = SURFACE_SIDE_STYLE('',(#307124)); +#307124 = SURFACE_STYLE_FILL_AREA(#307125); +#307125 = FILL_AREA_STYLE('',(#307126)); +#307126 = FILL_AREA_STYLE_COLOUR('',#270350); +#307127 = CURVE_STYLE('',#307128,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307129 = STYLED_ITEM('color',(#307130),#102179); +#307130 = PRESENTATION_STYLE_ASSIGNMENT((#307131,#307136)); +#307131 = SURFACE_STYLE_USAGE(.BOTH.,#307132); +#307132 = SURFACE_SIDE_STYLE('',(#307133)); +#307133 = SURFACE_STYLE_FILL_AREA(#307134); +#307134 = FILL_AREA_STYLE('',(#307135)); +#307135 = FILL_AREA_STYLE_COLOUR('',#270441); +#307136 = CURVE_STYLE('',#307137,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307138 = STYLED_ITEM('color',(#307139),#102254); +#307139 = PRESENTATION_STYLE_ASSIGNMENT((#307140,#307145)); +#307140 = SURFACE_STYLE_USAGE(.BOTH.,#307141); +#307141 = SURFACE_SIDE_STYLE('',(#307142)); +#307142 = SURFACE_STYLE_FILL_AREA(#307143); +#307143 = FILL_AREA_STYLE('',(#307144)); +#307144 = FILL_AREA_STYLE_COLOUR('',#270441); +#307145 = CURVE_STYLE('',#307146,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307147 = STYLED_ITEM('color',(#307148),#102278); +#307148 = PRESENTATION_STYLE_ASSIGNMENT((#307149,#307154)); +#307149 = SURFACE_STYLE_USAGE(.BOTH.,#307150); +#307150 = SURFACE_SIDE_STYLE('',(#307151)); +#307151 = SURFACE_STYLE_FILL_AREA(#307152); +#307152 = FILL_AREA_STYLE('',(#307153)); +#307153 = FILL_AREA_STYLE_COLOUR('',#270441); +#307154 = CURVE_STYLE('',#307155,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307156 = STYLED_ITEM('color',(#307157),#102346); +#307157 = PRESENTATION_STYLE_ASSIGNMENT((#307158,#307163)); +#307158 = SURFACE_STYLE_USAGE(.BOTH.,#307159); +#307159 = SURFACE_SIDE_STYLE('',(#307160)); +#307160 = SURFACE_STYLE_FILL_AREA(#307161); +#307161 = FILL_AREA_STYLE('',(#307162)); +#307162 = FILL_AREA_STYLE_COLOUR('',#270350); +#307163 = CURVE_STYLE('',#307164,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307165 = STYLED_ITEM('color',(#307166),#102434); +#307166 = PRESENTATION_STYLE_ASSIGNMENT((#307167,#307172)); +#307167 = SURFACE_STYLE_USAGE(.BOTH.,#307168); +#307168 = SURFACE_SIDE_STYLE('',(#307169)); +#307169 = SURFACE_STYLE_FILL_AREA(#307170); +#307170 = FILL_AREA_STYLE('',(#307171)); +#307171 = FILL_AREA_STYLE_COLOUR('',#270350); +#307172 = CURVE_STYLE('',#307173,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307174 = STYLED_ITEM('color',(#307175),#102450); +#307175 = PRESENTATION_STYLE_ASSIGNMENT((#307176,#307181)); +#307176 = SURFACE_STYLE_USAGE(.BOTH.,#307177); +#307177 = SURFACE_SIDE_STYLE('',(#307178)); +#307178 = SURFACE_STYLE_FILL_AREA(#307179); +#307179 = FILL_AREA_STYLE('',(#307180)); +#307180 = FILL_AREA_STYLE_COLOUR('',#270350); +#307181 = CURVE_STYLE('',#307182,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307183 = STYLED_ITEM('color',(#307184),#102466); +#307184 = PRESENTATION_STYLE_ASSIGNMENT((#307185,#307190)); +#307185 = SURFACE_STYLE_USAGE(.BOTH.,#307186); +#307186 = SURFACE_SIDE_STYLE('',(#307187)); +#307187 = SURFACE_STYLE_FILL_AREA(#307188); +#307188 = FILL_AREA_STYLE('',(#307189)); +#307189 = FILL_AREA_STYLE_COLOUR('',#270350); +#307190 = CURVE_STYLE('',#307191,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307192 = STYLED_ITEM('color',(#307193),#102482); +#307193 = PRESENTATION_STYLE_ASSIGNMENT((#307194,#307199)); +#307194 = SURFACE_STYLE_USAGE(.BOTH.,#307195); +#307195 = SURFACE_SIDE_STYLE('',(#307196)); +#307196 = SURFACE_STYLE_FILL_AREA(#307197); +#307197 = FILL_AREA_STYLE('',(#307198)); +#307198 = FILL_AREA_STYLE_COLOUR('',#270350); +#307199 = CURVE_STYLE('',#307200,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307201 = STYLED_ITEM('color',(#307202),#102498); +#307202 = PRESENTATION_STYLE_ASSIGNMENT((#307203,#307208)); +#307203 = SURFACE_STYLE_USAGE(.BOTH.,#307204); +#307204 = SURFACE_SIDE_STYLE('',(#307205)); +#307205 = SURFACE_STYLE_FILL_AREA(#307206); +#307206 = FILL_AREA_STYLE('',(#307207)); +#307207 = FILL_AREA_STYLE_COLOUR('',#270350); +#307208 = CURVE_STYLE('',#307209,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307210 = STYLED_ITEM('color',(#307211),#102515); +#307211 = PRESENTATION_STYLE_ASSIGNMENT((#307212,#307217)); +#307212 = SURFACE_STYLE_USAGE(.BOTH.,#307213); +#307213 = SURFACE_SIDE_STYLE('',(#307214)); +#307214 = SURFACE_STYLE_FILL_AREA(#307215); +#307215 = FILL_AREA_STYLE('',(#307216)); +#307216 = FILL_AREA_STYLE_COLOUR('',#270441); +#307217 = CURVE_STYLE('',#307218,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307219 = STYLED_ITEM('color',(#307220),#102548); +#307220 = PRESENTATION_STYLE_ASSIGNMENT((#307221,#307226)); +#307221 = SURFACE_STYLE_USAGE(.BOTH.,#307222); +#307222 = SURFACE_SIDE_STYLE('',(#307223)); +#307223 = SURFACE_STYLE_FILL_AREA(#307224); +#307224 = FILL_AREA_STYLE('',(#307225)); +#307225 = FILL_AREA_STYLE_COLOUR('',#270350); +#307226 = CURVE_STYLE('',#307227,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307228 = STYLED_ITEM('color',(#307229),#102565); +#307229 = PRESENTATION_STYLE_ASSIGNMENT((#307230,#307235)); +#307230 = SURFACE_STYLE_USAGE(.BOTH.,#307231); +#307231 = SURFACE_SIDE_STYLE('',(#307232)); +#307232 = SURFACE_STYLE_FILL_AREA(#307233); +#307233 = FILL_AREA_STYLE('',(#307234)); +#307234 = FILL_AREA_STYLE_COLOUR('',#270441); +#307235 = CURVE_STYLE('',#307236,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307237 = STYLED_ITEM('color',(#307238),#102587); +#307238 = PRESENTATION_STYLE_ASSIGNMENT((#307239,#307244)); +#307239 = SURFACE_STYLE_USAGE(.BOTH.,#307240); +#307240 = SURFACE_SIDE_STYLE('',(#307241)); +#307241 = SURFACE_STYLE_FILL_AREA(#307242); +#307242 = FILL_AREA_STYLE('',(#307243)); +#307243 = FILL_AREA_STYLE_COLOUR('',#270350); +#307244 = CURVE_STYLE('',#307245,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307246 = STYLED_ITEM('color',(#307247),#102618); +#307247 = PRESENTATION_STYLE_ASSIGNMENT((#307248,#307253)); +#307248 = SURFACE_STYLE_USAGE(.BOTH.,#307249); +#307249 = SURFACE_SIDE_STYLE('',(#307250)); +#307250 = SURFACE_STYLE_FILL_AREA(#307251); +#307251 = FILL_AREA_STYLE('',(#307252)); +#307252 = FILL_AREA_STYLE_COLOUR('',#270350); +#307253 = CURVE_STYLE('',#307254,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307255 = STYLED_ITEM('color',(#307256),#102641); +#307256 = PRESENTATION_STYLE_ASSIGNMENT((#307257,#307262)); +#307257 = SURFACE_STYLE_USAGE(.BOTH.,#307258); +#307258 = SURFACE_SIDE_STYLE('',(#307259)); +#307259 = SURFACE_STYLE_FILL_AREA(#307260); +#307260 = FILL_AREA_STYLE('',(#307261)); +#307261 = FILL_AREA_STYLE_COLOUR('',#270350); +#307262 = CURVE_STYLE('',#307263,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307264 = STYLED_ITEM('color',(#307265),#102664); +#307265 = PRESENTATION_STYLE_ASSIGNMENT((#307266,#307271)); +#307266 = SURFACE_STYLE_USAGE(.BOTH.,#307267); +#307267 = SURFACE_SIDE_STYLE('',(#307268)); +#307268 = SURFACE_STYLE_FILL_AREA(#307269); +#307269 = FILL_AREA_STYLE('',(#307270)); +#307270 = FILL_AREA_STYLE_COLOUR('',#270350); +#307271 = CURVE_STYLE('',#307272,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307273 = STYLED_ITEM('color',(#307274),#102687); +#307274 = PRESENTATION_STYLE_ASSIGNMENT((#307275,#307280)); +#307275 = SURFACE_STYLE_USAGE(.BOTH.,#307276); +#307276 = SURFACE_SIDE_STYLE('',(#307277)); +#307277 = SURFACE_STYLE_FILL_AREA(#307278); +#307278 = FILL_AREA_STYLE('',(#307279)); +#307279 = FILL_AREA_STYLE_COLOUR('',#270350); +#307280 = CURVE_STYLE('',#307281,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307282 = STYLED_ITEM('color',(#307283),#102717); +#307283 = PRESENTATION_STYLE_ASSIGNMENT((#307284,#307289)); +#307284 = SURFACE_STYLE_USAGE(.BOTH.,#307285); +#307285 = SURFACE_SIDE_STYLE('',(#307286)); +#307286 = SURFACE_STYLE_FILL_AREA(#307287); +#307287 = FILL_AREA_STYLE('',(#307288)); +#307288 = FILL_AREA_STYLE_COLOUR('',#270441); +#307289 = CURVE_STYLE('',#307290,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307291 = STYLED_ITEM('color',(#307292),#102734); +#307292 = PRESENTATION_STYLE_ASSIGNMENT((#307293,#307298)); +#307293 = SURFACE_STYLE_USAGE(.BOTH.,#307294); +#307294 = SURFACE_SIDE_STYLE('',(#307295)); +#307295 = SURFACE_STYLE_FILL_AREA(#307296); +#307296 = FILL_AREA_STYLE('',(#307297)); +#307297 = FILL_AREA_STYLE_COLOUR('',#270441); +#307298 = CURVE_STYLE('',#307299,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307300 = STYLED_ITEM('color',(#307301),#102751); +#307301 = PRESENTATION_STYLE_ASSIGNMENT((#307302,#307307)); +#307302 = SURFACE_STYLE_USAGE(.BOTH.,#307303); +#307303 = SURFACE_SIDE_STYLE('',(#307304)); +#307304 = SURFACE_STYLE_FILL_AREA(#307305); +#307305 = FILL_AREA_STYLE('',(#307306)); +#307306 = FILL_AREA_STYLE_COLOUR('',#270441); +#307307 = CURVE_STYLE('',#307308,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307309 = STYLED_ITEM('color',(#307310),#102768); +#307310 = PRESENTATION_STYLE_ASSIGNMENT((#307311,#307316)); +#307311 = SURFACE_STYLE_USAGE(.BOTH.,#307312); +#307312 = SURFACE_SIDE_STYLE('',(#307313)); +#307313 = SURFACE_STYLE_FILL_AREA(#307314); +#307314 = FILL_AREA_STYLE('',(#307315)); +#307315 = FILL_AREA_STYLE_COLOUR('',#270441); +#307316 = CURVE_STYLE('',#307317,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307318 = STYLED_ITEM('color',(#307319),#102785); +#307319 = PRESENTATION_STYLE_ASSIGNMENT((#307320,#307325)); +#307320 = SURFACE_STYLE_USAGE(.BOTH.,#307321); +#307321 = SURFACE_SIDE_STYLE('',(#307322)); +#307322 = SURFACE_STYLE_FILL_AREA(#307323); +#307323 = FILL_AREA_STYLE('',(#307324)); +#307324 = FILL_AREA_STYLE_COLOUR('',#270441); +#307325 = CURVE_STYLE('',#307326,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307327 = STYLED_ITEM('color',(#307328),#102802); +#307328 = PRESENTATION_STYLE_ASSIGNMENT((#307329,#307334)); +#307329 = SURFACE_STYLE_USAGE(.BOTH.,#307330); +#307330 = SURFACE_SIDE_STYLE('',(#307331)); +#307331 = SURFACE_STYLE_FILL_AREA(#307332); +#307332 = FILL_AREA_STYLE('',(#307333)); +#307333 = FILL_AREA_STYLE_COLOUR('',#270441); +#307334 = CURVE_STYLE('',#307335,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307336 = STYLED_ITEM('color',(#307337),#102819); +#307337 = PRESENTATION_STYLE_ASSIGNMENT((#307338,#307343)); +#307338 = SURFACE_STYLE_USAGE(.BOTH.,#307339); +#307339 = SURFACE_SIDE_STYLE('',(#307340)); +#307340 = SURFACE_STYLE_FILL_AREA(#307341); +#307341 = FILL_AREA_STYLE('',(#307342)); +#307342 = FILL_AREA_STYLE_COLOUR('',#270441); +#307343 = CURVE_STYLE('',#307344,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307345 = STYLED_ITEM('color',(#307346),#102836); +#307346 = PRESENTATION_STYLE_ASSIGNMENT((#307347,#307352)); +#307347 = SURFACE_STYLE_USAGE(.BOTH.,#307348); +#307348 = SURFACE_SIDE_STYLE('',(#307349)); +#307349 = SURFACE_STYLE_FILL_AREA(#307350); +#307350 = FILL_AREA_STYLE('',(#307351)); +#307351 = FILL_AREA_STYLE_COLOUR('',#270441); +#307352 = CURVE_STYLE('',#307353,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307354 = STYLED_ITEM('color',(#307355),#102848); +#307355 = PRESENTATION_STYLE_ASSIGNMENT((#307356,#307361)); +#307356 = SURFACE_STYLE_USAGE(.BOTH.,#307357); +#307357 = SURFACE_SIDE_STYLE('',(#307358)); +#307358 = SURFACE_STYLE_FILL_AREA(#307359); +#307359 = FILL_AREA_STYLE('',(#307360)); +#307360 = FILL_AREA_STYLE_COLOUR('',#270350); +#307361 = CURVE_STYLE('',#307362,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307363 = STYLED_ITEM('color',(#307364),#102871); +#307364 = PRESENTATION_STYLE_ASSIGNMENT((#307365,#307370)); +#307365 = SURFACE_STYLE_USAGE(.BOTH.,#307366); +#307366 = SURFACE_SIDE_STYLE('',(#307367)); +#307367 = SURFACE_STYLE_FILL_AREA(#307368); +#307368 = FILL_AREA_STYLE('',(#307369)); +#307369 = FILL_AREA_STYLE_COLOUR('',#270350); +#307370 = CURVE_STYLE('',#307371,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307372 = STYLED_ITEM('color',(#307373),#102894); +#307373 = PRESENTATION_STYLE_ASSIGNMENT((#307374,#307379)); +#307374 = SURFACE_STYLE_USAGE(.BOTH.,#307375); +#307375 = SURFACE_SIDE_STYLE('',(#307376)); +#307376 = SURFACE_STYLE_FILL_AREA(#307377); +#307377 = FILL_AREA_STYLE('',(#307378)); +#307378 = FILL_AREA_STYLE_COLOUR('',#270350); +#307379 = CURVE_STYLE('',#307380,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307381 = STYLED_ITEM('color',(#307382),#102911); +#307382 = PRESENTATION_STYLE_ASSIGNMENT((#307383,#307388)); +#307383 = SURFACE_STYLE_USAGE(.BOTH.,#307384); +#307384 = SURFACE_SIDE_STYLE('',(#307385)); +#307385 = SURFACE_STYLE_FILL_AREA(#307386); +#307386 = FILL_AREA_STYLE('',(#307387)); +#307387 = FILL_AREA_STYLE_COLOUR('',#270441); +#307388 = CURVE_STYLE('',#307389,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307390 = STYLED_ITEM('color',(#307391),#102986); +#307391 = PRESENTATION_STYLE_ASSIGNMENT((#307392,#307397)); +#307392 = SURFACE_STYLE_USAGE(.BOTH.,#307393); +#307393 = SURFACE_SIDE_STYLE('',(#307394)); +#307394 = SURFACE_STYLE_FILL_AREA(#307395); +#307395 = FILL_AREA_STYLE('',(#307396)); +#307396 = FILL_AREA_STYLE_COLOUR('',#270441); +#307397 = CURVE_STYLE('',#307398,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307399 = STYLED_ITEM('color',(#307400),#103010); +#307400 = PRESENTATION_STYLE_ASSIGNMENT((#307401,#307406)); +#307401 = SURFACE_STYLE_USAGE(.BOTH.,#307402); +#307402 = SURFACE_SIDE_STYLE('',(#307403)); +#307403 = SURFACE_STYLE_FILL_AREA(#307404); +#307404 = FILL_AREA_STYLE('',(#307405)); +#307405 = FILL_AREA_STYLE_COLOUR('',#270441); +#307406 = CURVE_STYLE('',#307407,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307408 = STYLED_ITEM('color',(#307409),#103078); +#307409 = PRESENTATION_STYLE_ASSIGNMENT((#307410,#307415)); +#307410 = SURFACE_STYLE_USAGE(.BOTH.,#307411); +#307411 = SURFACE_SIDE_STYLE('',(#307412)); +#307412 = SURFACE_STYLE_FILL_AREA(#307413); +#307413 = FILL_AREA_STYLE('',(#307414)); +#307414 = FILL_AREA_STYLE_COLOUR('',#270441); +#307415 = CURVE_STYLE('',#307416,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307417 = STYLED_ITEM('color',(#307418),#103095); +#307418 = PRESENTATION_STYLE_ASSIGNMENT((#307419,#307424)); +#307419 = SURFACE_STYLE_USAGE(.BOTH.,#307420); +#307420 = SURFACE_SIDE_STYLE('',(#307421)); +#307421 = SURFACE_STYLE_FILL_AREA(#307422); +#307422 = FILL_AREA_STYLE('',(#307423)); +#307423 = FILL_AREA_STYLE_COLOUR('',#270350); +#307424 = CURVE_STYLE('',#307425,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307426 = STYLED_ITEM('color',(#307427),#103145); +#307427 = PRESENTATION_STYLE_ASSIGNMENT((#307428,#307433)); +#307428 = SURFACE_STYLE_USAGE(.BOTH.,#307429); +#307429 = SURFACE_SIDE_STYLE('',(#307430)); +#307430 = SURFACE_STYLE_FILL_AREA(#307431); +#307431 = FILL_AREA_STYLE('',(#307432)); +#307432 = FILL_AREA_STYLE_COLOUR('',#270441); +#307433 = CURVE_STYLE('',#307434,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307435 = STYLED_ITEM('color',(#307436),#103162); +#307436 = PRESENTATION_STYLE_ASSIGNMENT((#307437,#307442)); +#307437 = SURFACE_STYLE_USAGE(.BOTH.,#307438); +#307438 = SURFACE_SIDE_STYLE('',(#307439)); +#307439 = SURFACE_STYLE_FILL_AREA(#307440); +#307440 = FILL_AREA_STYLE('',(#307441)); +#307441 = FILL_AREA_STYLE_COLOUR('',#270441); +#307442 = CURVE_STYLE('',#307443,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307444 = STYLED_ITEM('color',(#307445),#103179); +#307445 = PRESENTATION_STYLE_ASSIGNMENT((#307446,#307451)); +#307446 = SURFACE_STYLE_USAGE(.BOTH.,#307447); +#307447 = SURFACE_SIDE_STYLE('',(#307448)); +#307448 = SURFACE_STYLE_FILL_AREA(#307449); +#307449 = FILL_AREA_STYLE('',(#307450)); +#307450 = FILL_AREA_STYLE_COLOUR('',#270441); +#307451 = CURVE_STYLE('',#307452,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307453 = STYLED_ITEM('color',(#307454),#103196); +#307454 = PRESENTATION_STYLE_ASSIGNMENT((#307455,#307460)); +#307455 = SURFACE_STYLE_USAGE(.BOTH.,#307456); +#307456 = SURFACE_SIDE_STYLE('',(#307457)); +#307457 = SURFACE_STYLE_FILL_AREA(#307458); +#307458 = FILL_AREA_STYLE('',(#307459)); +#307459 = FILL_AREA_STYLE_COLOUR('',#270441); +#307460 = CURVE_STYLE('',#307461,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307462 = STYLED_ITEM('color',(#307463),#103213); +#307463 = PRESENTATION_STYLE_ASSIGNMENT((#307464,#307469)); +#307464 = SURFACE_STYLE_USAGE(.BOTH.,#307465); +#307465 = SURFACE_SIDE_STYLE('',(#307466)); +#307466 = SURFACE_STYLE_FILL_AREA(#307467); +#307467 = FILL_AREA_STYLE('',(#307468)); +#307468 = FILL_AREA_STYLE_COLOUR('',#270441); +#307469 = CURVE_STYLE('',#307470,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307471 = STYLED_ITEM('color',(#307472),#103230); +#307472 = PRESENTATION_STYLE_ASSIGNMENT((#307473,#307478)); +#307473 = SURFACE_STYLE_USAGE(.BOTH.,#307474); +#307474 = SURFACE_SIDE_STYLE('',(#307475)); +#307475 = SURFACE_STYLE_FILL_AREA(#307476); +#307476 = FILL_AREA_STYLE('',(#307477)); +#307477 = FILL_AREA_STYLE_COLOUR('',#270441); +#307478 = CURVE_STYLE('',#307479,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307480 = STYLED_ITEM('color',(#307481),#103242); +#307481 = PRESENTATION_STYLE_ASSIGNMENT((#307482,#307487)); +#307482 = SURFACE_STYLE_USAGE(.BOTH.,#307483); +#307483 = SURFACE_SIDE_STYLE('',(#307484)); +#307484 = SURFACE_STYLE_FILL_AREA(#307485); +#307485 = FILL_AREA_STYLE('',(#307486)); +#307486 = FILL_AREA_STYLE_COLOUR('',#271711); +#307487 = CURVE_STYLE('',#307488,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#307488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307489 = STYLED_ITEM('color',(#307490),#103273); +#307490 = PRESENTATION_STYLE_ASSIGNMENT((#307491,#307496)); +#307491 = SURFACE_STYLE_USAGE(.BOTH.,#307492); +#307492 = SURFACE_SIDE_STYLE('',(#307493)); +#307493 = SURFACE_STYLE_FILL_AREA(#307494); +#307494 = FILL_AREA_STYLE('',(#307495)); +#307495 = FILL_AREA_STYLE_COLOUR('',#271711); +#307496 = CURVE_STYLE('',#307497,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#307497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307498 = STYLED_ITEM('color',(#307499),#103297); +#307499 = PRESENTATION_STYLE_ASSIGNMENT((#307500,#307505)); +#307500 = SURFACE_STYLE_USAGE(.BOTH.,#307501); +#307501 = SURFACE_SIDE_STYLE('',(#307502)); +#307502 = SURFACE_STYLE_FILL_AREA(#307503); +#307503 = FILL_AREA_STYLE('',(#307504)); +#307504 = FILL_AREA_STYLE_COLOUR('',#271711); +#307505 = CURVE_STYLE('',#307506,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#307506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307507 = STYLED_ITEM('color',(#307508),#103321); +#307508 = PRESENTATION_STYLE_ASSIGNMENT((#307509,#307514)); +#307509 = SURFACE_STYLE_USAGE(.BOTH.,#307510); +#307510 = SURFACE_SIDE_STYLE('',(#307511)); +#307511 = SURFACE_STYLE_FILL_AREA(#307512); +#307512 = FILL_AREA_STYLE('',(#307513)); +#307513 = FILL_AREA_STYLE_COLOUR('',#271711); +#307514 = CURVE_STYLE('',#307515,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#307515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307516 = STYLED_ITEM('color',(#307517),#103338); +#307517 = PRESENTATION_STYLE_ASSIGNMENT((#307518,#307523)); +#307518 = SURFACE_STYLE_USAGE(.BOTH.,#307519); +#307519 = SURFACE_SIDE_STYLE('',(#307520)); +#307520 = SURFACE_STYLE_FILL_AREA(#307521); +#307521 = FILL_AREA_STYLE('',(#307522)); +#307522 = FILL_AREA_STYLE_COLOUR('',#271711); +#307523 = CURVE_STYLE('',#307524,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#307524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307525 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #307526,#307533,#307540,#307547,#307554,#307561,#307568,#307575, + #307582,#307589,#307596,#307603,#307610,#307617,#307624,#307631, + #307638,#307645,#307652,#307659,#307666,#307673,#307680,#307687, + #307694,#307701),#52519); +#307526 = STYLED_ITEM('color',(#307527),#51731); +#307527 = PRESENTATION_STYLE_ASSIGNMENT((#307528)); +#307528 = SURFACE_STYLE_USAGE(.BOTH.,#307529); +#307529 = SURFACE_SIDE_STYLE('',(#307530)); +#307530 = SURFACE_STYLE_FILL_AREA(#307531); +#307531 = FILL_AREA_STYLE('',(#307532)); +#307532 = FILL_AREA_STYLE_COLOUR('',#270441); +#307533 = STYLED_ITEM('color',(#307534),#51771); +#307534 = PRESENTATION_STYLE_ASSIGNMENT((#307535)); +#307535 = SURFACE_STYLE_USAGE(.BOTH.,#307536); +#307536 = SURFACE_SIDE_STYLE('',(#307537)); +#307537 = SURFACE_STYLE_FILL_AREA(#307538); +#307538 = FILL_AREA_STYLE('',(#307539)); +#307539 = FILL_AREA_STYLE_COLOUR('',#270441); +#307540 = STYLED_ITEM('color',(#307541),#51854); +#307541 = PRESENTATION_STYLE_ASSIGNMENT((#307542)); +#307542 = SURFACE_STYLE_USAGE(.BOTH.,#307543); +#307543 = SURFACE_SIDE_STYLE('',(#307544)); +#307544 = SURFACE_STYLE_FILL_AREA(#307545); +#307545 = FILL_AREA_STYLE('',(#307546)); +#307546 = FILL_AREA_STYLE_COLOUR('',#270441); +#307547 = STYLED_ITEM('color',(#307548),#51879); +#307548 = PRESENTATION_STYLE_ASSIGNMENT((#307549)); +#307549 = SURFACE_STYLE_USAGE(.BOTH.,#307550); +#307550 = SURFACE_SIDE_STYLE('',(#307551)); +#307551 = SURFACE_STYLE_FILL_AREA(#307552); +#307552 = FILL_AREA_STYLE('',(#307553)); +#307553 = FILL_AREA_STYLE_COLOUR('',#270441); +#307554 = STYLED_ITEM('color',(#307555),#51904); +#307555 = PRESENTATION_STYLE_ASSIGNMENT((#307556)); +#307556 = SURFACE_STYLE_USAGE(.BOTH.,#307557); +#307557 = SURFACE_SIDE_STYLE('',(#307558)); +#307558 = SURFACE_STYLE_FILL_AREA(#307559); +#307559 = FILL_AREA_STYLE('',(#307560)); +#307560 = FILL_AREA_STYLE_COLOUR('',#270441); +#307561 = STYLED_ITEM('color',(#307562),#51971); +#307562 = PRESENTATION_STYLE_ASSIGNMENT((#307563)); +#307563 = SURFACE_STYLE_USAGE(.BOTH.,#307564); +#307564 = SURFACE_SIDE_STYLE('',(#307565)); +#307565 = SURFACE_STYLE_FILL_AREA(#307566); +#307566 = FILL_AREA_STYLE('',(#307567)); +#307567 = FILL_AREA_STYLE_COLOUR('',#270441); +#307568 = STYLED_ITEM('color',(#307569),#51988); +#307569 = PRESENTATION_STYLE_ASSIGNMENT((#307570)); +#307570 = SURFACE_STYLE_USAGE(.BOTH.,#307571); +#307571 = SURFACE_SIDE_STYLE('',(#307572)); +#307572 = SURFACE_STYLE_FILL_AREA(#307573); +#307573 = FILL_AREA_STYLE('',(#307574)); +#307574 = FILL_AREA_STYLE_COLOUR('',#270441); +#307575 = STYLED_ITEM('color',(#307576),#52005); +#307576 = PRESENTATION_STYLE_ASSIGNMENT((#307577)); +#307577 = SURFACE_STYLE_USAGE(.BOTH.,#307578); +#307578 = SURFACE_SIDE_STYLE('',(#307579)); +#307579 = SURFACE_STYLE_FILL_AREA(#307580); +#307580 = FILL_AREA_STYLE('',(#307581)); +#307581 = FILL_AREA_STYLE_COLOUR('',#282550); +#307582 = STYLED_ITEM('color',(#307583),#52054); +#307583 = PRESENTATION_STYLE_ASSIGNMENT((#307584)); +#307584 = SURFACE_STYLE_USAGE(.BOTH.,#307585); +#307585 = SURFACE_SIDE_STYLE('',(#307586)); +#307586 = SURFACE_STYLE_FILL_AREA(#307587); +#307587 = FILL_AREA_STYLE('',(#307588)); +#307588 = FILL_AREA_STYLE_COLOUR('',#270441); +#307589 = STYLED_ITEM('color',(#307590),#52071); +#307590 = PRESENTATION_STYLE_ASSIGNMENT((#307591)); +#307591 = SURFACE_STYLE_USAGE(.BOTH.,#307592); +#307592 = SURFACE_SIDE_STYLE('',(#307593)); +#307593 = SURFACE_STYLE_FILL_AREA(#307594); +#307594 = FILL_AREA_STYLE('',(#307595)); +#307595 = FILL_AREA_STYLE_COLOUR('',#270441); +#307596 = STYLED_ITEM('color',(#307597),#52088); +#307597 = PRESENTATION_STYLE_ASSIGNMENT((#307598)); +#307598 = SURFACE_STYLE_USAGE(.BOTH.,#307599); +#307599 = SURFACE_SIDE_STYLE('',(#307600)); +#307600 = SURFACE_STYLE_FILL_AREA(#307601); +#307601 = FILL_AREA_STYLE('',(#307602)); +#307602 = FILL_AREA_STYLE_COLOUR('',#282550); +#307603 = STYLED_ITEM('color',(#307604),#52137); +#307604 = PRESENTATION_STYLE_ASSIGNMENT((#307605)); +#307605 = SURFACE_STYLE_USAGE(.BOTH.,#307606); +#307606 = SURFACE_SIDE_STYLE('',(#307607)); +#307607 = SURFACE_STYLE_FILL_AREA(#307608); +#307608 = FILL_AREA_STYLE('',(#307609)); +#307609 = FILL_AREA_STYLE_COLOUR('',#282550); +#307610 = STYLED_ITEM('color',(#307611),#52154); +#307611 = PRESENTATION_STYLE_ASSIGNMENT((#307612)); +#307612 = SURFACE_STYLE_USAGE(.BOTH.,#307613); +#307613 = SURFACE_SIDE_STYLE('',(#307614)); +#307614 = SURFACE_STYLE_FILL_AREA(#307615); +#307615 = FILL_AREA_STYLE('',(#307616)); +#307616 = FILL_AREA_STYLE_COLOUR('',#270441); +#307617 = STYLED_ITEM('color',(#307618),#52223); +#307618 = PRESENTATION_STYLE_ASSIGNMENT((#307619)); +#307619 = SURFACE_STYLE_USAGE(.BOTH.,#307620); +#307620 = SURFACE_SIDE_STYLE('',(#307621)); +#307621 = SURFACE_STYLE_FILL_AREA(#307622); +#307622 = FILL_AREA_STYLE('',(#307623)); +#307623 = FILL_AREA_STYLE_COLOUR('',#306353); +#307624 = STYLED_ITEM('color',(#307625),#52254); +#307625 = PRESENTATION_STYLE_ASSIGNMENT((#307626)); +#307626 = SURFACE_STYLE_USAGE(.BOTH.,#307627); +#307627 = SURFACE_SIDE_STYLE('',(#307628)); +#307628 = SURFACE_STYLE_FILL_AREA(#307629); +#307629 = FILL_AREA_STYLE('',(#307630)); +#307630 = FILL_AREA_STYLE_COLOUR('',#306353); +#307631 = STYLED_ITEM('color',(#307632),#52278); +#307632 = PRESENTATION_STYLE_ASSIGNMENT((#307633)); +#307633 = SURFACE_STYLE_USAGE(.BOTH.,#307634); +#307634 = SURFACE_SIDE_STYLE('',(#307635)); +#307635 = SURFACE_STYLE_FILL_AREA(#307636); +#307636 = FILL_AREA_STYLE('',(#307637)); +#307637 = FILL_AREA_STYLE_COLOUR('',#270441); +#307638 = STYLED_ITEM('color',(#307639),#52347); +#307639 = PRESENTATION_STYLE_ASSIGNMENT((#307640)); +#307640 = SURFACE_STYLE_USAGE(.BOTH.,#307641); +#307641 = SURFACE_SIDE_STYLE('',(#307642)); +#307642 = SURFACE_STYLE_FILL_AREA(#307643); +#307643 = FILL_AREA_STYLE('',(#307644)); +#307644 = FILL_AREA_STYLE_COLOUR('',#306353); +#307645 = STYLED_ITEM('color',(#307646),#52371); +#307646 = PRESENTATION_STYLE_ASSIGNMENT((#307647)); +#307647 = SURFACE_STYLE_USAGE(.BOTH.,#307648); +#307648 = SURFACE_SIDE_STYLE('',(#307649)); +#307649 = SURFACE_STYLE_FILL_AREA(#307650); +#307650 = FILL_AREA_STYLE('',(#307651)); +#307651 = FILL_AREA_STYLE_COLOUR('',#270441); +#307652 = STYLED_ITEM('color',(#307653),#52388); +#307653 = PRESENTATION_STYLE_ASSIGNMENT((#307654)); +#307654 = SURFACE_STYLE_USAGE(.BOTH.,#307655); +#307655 = SURFACE_SIDE_STYLE('',(#307656)); +#307656 = SURFACE_STYLE_FILL_AREA(#307657); +#307657 = FILL_AREA_STYLE('',(#307658)); +#307658 = FILL_AREA_STYLE_COLOUR('',#270441); +#307659 = STYLED_ITEM('color',(#307660),#52405); +#307660 = PRESENTATION_STYLE_ASSIGNMENT((#307661)); +#307661 = SURFACE_STYLE_USAGE(.BOTH.,#307662); +#307662 = SURFACE_SIDE_STYLE('',(#307663)); +#307663 = SURFACE_STYLE_FILL_AREA(#307664); +#307664 = FILL_AREA_STYLE('',(#307665)); +#307665 = FILL_AREA_STYLE_COLOUR('',#270441); +#307666 = STYLED_ITEM('color',(#307667),#52422); +#307667 = PRESENTATION_STYLE_ASSIGNMENT((#307668)); +#307668 = SURFACE_STYLE_USAGE(.BOTH.,#307669); +#307669 = SURFACE_SIDE_STYLE('',(#307670)); +#307670 = SURFACE_STYLE_FILL_AREA(#307671); +#307671 = FILL_AREA_STYLE('',(#307672)); +#307672 = FILL_AREA_STYLE_COLOUR('',#270441); +#307673 = STYLED_ITEM('color',(#307674),#52439); +#307674 = PRESENTATION_STYLE_ASSIGNMENT((#307675)); +#307675 = SURFACE_STYLE_USAGE(.BOTH.,#307676); +#307676 = SURFACE_SIDE_STYLE('',(#307677)); +#307677 = SURFACE_STYLE_FILL_AREA(#307678); +#307678 = FILL_AREA_STYLE('',(#307679)); +#307679 = FILL_AREA_STYLE_COLOUR('',#270441); +#307680 = STYLED_ITEM('color',(#307681),#52456); +#307681 = PRESENTATION_STYLE_ASSIGNMENT((#307682)); +#307682 = SURFACE_STYLE_USAGE(.BOTH.,#307683); +#307683 = SURFACE_SIDE_STYLE('',(#307684)); +#307684 = SURFACE_STYLE_FILL_AREA(#307685); +#307685 = FILL_AREA_STYLE('',(#307686)); +#307686 = FILL_AREA_STYLE_COLOUR('',#270441); +#307687 = STYLED_ITEM('color',(#307688),#52473); +#307688 = PRESENTATION_STYLE_ASSIGNMENT((#307689)); +#307689 = SURFACE_STYLE_USAGE(.BOTH.,#307690); +#307690 = SURFACE_SIDE_STYLE('',(#307691)); +#307691 = SURFACE_STYLE_FILL_AREA(#307692); +#307692 = FILL_AREA_STYLE('',(#307693)); +#307693 = FILL_AREA_STYLE_COLOUR('',#270441); +#307694 = STYLED_ITEM('color',(#307695),#52490); +#307695 = PRESENTATION_STYLE_ASSIGNMENT((#307696)); +#307696 = SURFACE_STYLE_USAGE(.BOTH.,#307697); +#307697 = SURFACE_SIDE_STYLE('',(#307698)); +#307698 = SURFACE_STYLE_FILL_AREA(#307699); +#307699 = FILL_AREA_STYLE('',(#307700)); +#307700 = FILL_AREA_STYLE_COLOUR('',#306353); +#307701 = STYLED_ITEM('color',(#307702),#52507); +#307702 = PRESENTATION_STYLE_ASSIGNMENT((#307703)); +#307703 = SURFACE_STYLE_USAGE(.BOTH.,#307704); +#307704 = SURFACE_SIDE_STYLE('',(#307705)); +#307705 = SURFACE_STYLE_FILL_AREA(#307706); +#307706 = FILL_AREA_STYLE('',(#307707)); +#307707 = FILL_AREA_STYLE_COLOUR('',#306353); +#307708 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #307709,#307718,#307727,#307736,#307745,#307754,#307763,#307772, + #307781,#307790,#307799,#307808,#307817,#307826,#307835,#307844, + #307853,#307862,#307871,#307880,#307889,#307898,#307907,#307916, + #307925,#307934,#307943,#307952,#307961,#307970,#307979,#307988, + #307997,#308006,#308015,#308024,#308033,#308042,#308051,#308060, + #308069,#308078,#308087,#308096,#308105,#308114,#308123,#308132, + #308141,#308150,#308159,#308168,#308177,#308186,#308195,#308204, + #308213,#308222,#308231,#308240,#308249,#308258,#308267,#308276, + #308285,#308294,#308303,#308312,#308321),#38167); +#307709 = STYLED_ITEM('color',(#307710),#36187); +#307710 = PRESENTATION_STYLE_ASSIGNMENT((#307711,#307716)); +#307711 = SURFACE_STYLE_USAGE(.BOTH.,#307712); +#307712 = SURFACE_SIDE_STYLE('',(#307713)); +#307713 = SURFACE_STYLE_FILL_AREA(#307714); +#307714 = FILL_AREA_STYLE('',(#307715)); +#307715 = FILL_AREA_STYLE_COLOUR('',#270350); +#307716 = CURVE_STYLE('',#307717,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307717 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307718 = STYLED_ITEM('color',(#307719),#36225); +#307719 = PRESENTATION_STYLE_ASSIGNMENT((#307720,#307725)); +#307720 = SURFACE_STYLE_USAGE(.BOTH.,#307721); +#307721 = SURFACE_SIDE_STYLE('',(#307722)); +#307722 = SURFACE_STYLE_FILL_AREA(#307723); +#307723 = FILL_AREA_STYLE('',(#307724)); +#307724 = FILL_AREA_STYLE_COLOUR('',#270350); +#307725 = CURVE_STYLE('',#307726,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307726 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307727 = STYLED_ITEM('color',(#307728),#36288); +#307728 = PRESENTATION_STYLE_ASSIGNMENT((#307729,#307734)); +#307729 = SURFACE_STYLE_USAGE(.BOTH.,#307730); +#307730 = SURFACE_SIDE_STYLE('',(#307731)); +#307731 = SURFACE_STYLE_FILL_AREA(#307732); +#307732 = FILL_AREA_STYLE('',(#307733)); +#307733 = FILL_AREA_STYLE_COLOUR('',#270350); +#307734 = CURVE_STYLE('',#307735,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307735 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307736 = STYLED_ITEM('color',(#307737),#36311); +#307737 = PRESENTATION_STYLE_ASSIGNMENT((#307738,#307743)); +#307738 = SURFACE_STYLE_USAGE(.BOTH.,#307739); +#307739 = SURFACE_SIDE_STYLE('',(#307740)); +#307740 = SURFACE_STYLE_FILL_AREA(#307741); +#307741 = FILL_AREA_STYLE('',(#307742)); +#307742 = FILL_AREA_STYLE_COLOUR('',#270350); +#307743 = CURVE_STYLE('',#307744,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307744 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307745 = STYLED_ITEM('color',(#307746),#36340); +#307746 = PRESENTATION_STYLE_ASSIGNMENT((#307747,#307752)); +#307747 = SURFACE_STYLE_USAGE(.BOTH.,#307748); +#307748 = SURFACE_SIDE_STYLE('',(#307749)); +#307749 = SURFACE_STYLE_FILL_AREA(#307750); +#307750 = FILL_AREA_STYLE('',(#307751)); +#307751 = FILL_AREA_STYLE_COLOUR('',#270350); +#307752 = CURVE_STYLE('',#307753,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307753 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307754 = STYLED_ITEM('color',(#307755),#36363); +#307755 = PRESENTATION_STYLE_ASSIGNMENT((#307756,#307761)); +#307756 = SURFACE_STYLE_USAGE(.BOTH.,#307757); +#307757 = SURFACE_SIDE_STYLE('',(#307758)); +#307758 = SURFACE_STYLE_FILL_AREA(#307759); +#307759 = FILL_AREA_STYLE('',(#307760)); +#307760 = FILL_AREA_STYLE_COLOUR('',#270350); +#307761 = CURVE_STYLE('',#307762,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307762 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307763 = STYLED_ITEM('color',(#307764),#36418); +#307764 = PRESENTATION_STYLE_ASSIGNMENT((#307765,#307770)); +#307765 = SURFACE_STYLE_USAGE(.BOTH.,#307766); +#307766 = SURFACE_SIDE_STYLE('',(#307767)); +#307767 = SURFACE_STYLE_FILL_AREA(#307768); +#307768 = FILL_AREA_STYLE('',(#307769)); +#307769 = FILL_AREA_STYLE_COLOUR('',#270350); +#307770 = CURVE_STYLE('',#307771,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307771 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307772 = STYLED_ITEM('color',(#307773),#36457); +#307773 = PRESENTATION_STYLE_ASSIGNMENT((#307774,#307779)); +#307774 = SURFACE_STYLE_USAGE(.BOTH.,#307775); +#307775 = SURFACE_SIDE_STYLE('',(#307776)); +#307776 = SURFACE_STYLE_FILL_AREA(#307777); +#307777 = FILL_AREA_STYLE('',(#307778)); +#307778 = FILL_AREA_STYLE_COLOUR('',#270350); +#307779 = CURVE_STYLE('',#307780,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307780 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307781 = STYLED_ITEM('color',(#307782),#36480); +#307782 = PRESENTATION_STYLE_ASSIGNMENT((#307783,#307788)); +#307783 = SURFACE_STYLE_USAGE(.BOTH.,#307784); +#307784 = SURFACE_SIDE_STYLE('',(#307785)); +#307785 = SURFACE_STYLE_FILL_AREA(#307786); +#307786 = FILL_AREA_STYLE('',(#307787)); +#307787 = FILL_AREA_STYLE_COLOUR('',#270350); +#307788 = CURVE_STYLE('',#307789,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307789 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307790 = STYLED_ITEM('color',(#307791),#36503); +#307791 = PRESENTATION_STYLE_ASSIGNMENT((#307792,#307797)); +#307792 = SURFACE_STYLE_USAGE(.BOTH.,#307793); +#307793 = SURFACE_SIDE_STYLE('',(#307794)); +#307794 = SURFACE_STYLE_FILL_AREA(#307795); +#307795 = FILL_AREA_STYLE('',(#307796)); +#307796 = FILL_AREA_STYLE_COLOUR('',#270350); +#307797 = CURVE_STYLE('',#307798,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307798 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307799 = STYLED_ITEM('color',(#307800),#36520); +#307800 = PRESENTATION_STYLE_ASSIGNMENT((#307801,#307806)); +#307801 = SURFACE_STYLE_USAGE(.BOTH.,#307802); +#307802 = SURFACE_SIDE_STYLE('',(#307803)); +#307803 = SURFACE_STYLE_FILL_AREA(#307804); +#307804 = FILL_AREA_STYLE('',(#307805)); +#307805 = FILL_AREA_STYLE_COLOUR('',#270350); +#307806 = CURVE_STYLE('',#307807,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307807 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307808 = STYLED_ITEM('color',(#307809),#36543); +#307809 = PRESENTATION_STYLE_ASSIGNMENT((#307810,#307815)); +#307810 = SURFACE_STYLE_USAGE(.BOTH.,#307811); +#307811 = SURFACE_SIDE_STYLE('',(#307812)); +#307812 = SURFACE_STYLE_FILL_AREA(#307813); +#307813 = FILL_AREA_STYLE('',(#307814)); +#307814 = FILL_AREA_STYLE_COLOUR('',#270350); +#307815 = CURVE_STYLE('',#307816,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307816 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307817 = STYLED_ITEM('color',(#307818),#36631); +#307818 = PRESENTATION_STYLE_ASSIGNMENT((#307819,#307824)); +#307819 = SURFACE_STYLE_USAGE(.BOTH.,#307820); +#307820 = SURFACE_SIDE_STYLE('',(#307821)); +#307821 = SURFACE_STYLE_FILL_AREA(#307822); +#307822 = FILL_AREA_STYLE('',(#307823)); +#307823 = FILL_AREA_STYLE_COLOUR('',#270350); +#307824 = CURVE_STYLE('',#307825,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307825 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307826 = STYLED_ITEM('color',(#307827),#36647); +#307827 = PRESENTATION_STYLE_ASSIGNMENT((#307828,#307833)); +#307828 = SURFACE_STYLE_USAGE(.BOTH.,#307829); +#307829 = SURFACE_SIDE_STYLE('',(#307830)); +#307830 = SURFACE_STYLE_FILL_AREA(#307831); +#307831 = FILL_AREA_STYLE('',(#307832)); +#307832 = FILL_AREA_STYLE_COLOUR('',#270350); +#307833 = CURVE_STYLE('',#307834,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307834 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307835 = STYLED_ITEM('color',(#307836),#36677); +#307836 = PRESENTATION_STYLE_ASSIGNMENT((#307837,#307842)); +#307837 = SURFACE_STYLE_USAGE(.BOTH.,#307838); +#307838 = SURFACE_SIDE_STYLE('',(#307839)); +#307839 = SURFACE_STYLE_FILL_AREA(#307840); +#307840 = FILL_AREA_STYLE('',(#307841)); +#307841 = FILL_AREA_STYLE_COLOUR('',#270441); +#307842 = CURVE_STYLE('',#307843,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307843 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307844 = STYLED_ITEM('color',(#307845),#36710); +#307845 = PRESENTATION_STYLE_ASSIGNMENT((#307846,#307851)); +#307846 = SURFACE_STYLE_USAGE(.BOTH.,#307847); +#307847 = SURFACE_SIDE_STYLE('',(#307848)); +#307848 = SURFACE_STYLE_FILL_AREA(#307849); +#307849 = FILL_AREA_STYLE('',(#307850)); +#307850 = FILL_AREA_STYLE_COLOUR('',#270350); +#307851 = CURVE_STYLE('',#307852,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307852 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307853 = STYLED_ITEM('color',(#307854),#36741); +#307854 = PRESENTATION_STYLE_ASSIGNMENT((#307855,#307860)); +#307855 = SURFACE_STYLE_USAGE(.BOTH.,#307856); +#307856 = SURFACE_SIDE_STYLE('',(#307857)); +#307857 = SURFACE_STYLE_FILL_AREA(#307858); +#307858 = FILL_AREA_STYLE('',(#307859)); +#307859 = FILL_AREA_STYLE_COLOUR('',#270441); +#307860 = CURVE_STYLE('',#307861,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307861 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307862 = STYLED_ITEM('color',(#307863),#36774); +#307863 = PRESENTATION_STYLE_ASSIGNMENT((#307864,#307869)); +#307864 = SURFACE_STYLE_USAGE(.BOTH.,#307865); +#307865 = SURFACE_SIDE_STYLE('',(#307866)); +#307866 = SURFACE_STYLE_FILL_AREA(#307867); +#307867 = FILL_AREA_STYLE('',(#307868)); +#307868 = FILL_AREA_STYLE_COLOUR('',#270350); +#307869 = CURVE_STYLE('',#307870,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307870 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307871 = STYLED_ITEM('color',(#307872),#36791); +#307872 = PRESENTATION_STYLE_ASSIGNMENT((#307873,#307878)); +#307873 = SURFACE_STYLE_USAGE(.BOTH.,#307874); +#307874 = SURFACE_SIDE_STYLE('',(#307875)); +#307875 = SURFACE_STYLE_FILL_AREA(#307876); +#307876 = FILL_AREA_STYLE('',(#307877)); +#307877 = FILL_AREA_STYLE_COLOUR('',#270350); +#307878 = CURVE_STYLE('',#307879,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307879 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307880 = STYLED_ITEM('color',(#307881),#36808); +#307881 = PRESENTATION_STYLE_ASSIGNMENT((#307882,#307887)); +#307882 = SURFACE_STYLE_USAGE(.BOTH.,#307883); +#307883 = SURFACE_SIDE_STYLE('',(#307884)); +#307884 = SURFACE_STYLE_FILL_AREA(#307885); +#307885 = FILL_AREA_STYLE('',(#307886)); +#307886 = FILL_AREA_STYLE_COLOUR('',#270441); +#307887 = CURVE_STYLE('',#307888,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307888 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307889 = STYLED_ITEM('color',(#307890),#36841); +#307890 = PRESENTATION_STYLE_ASSIGNMENT((#307891,#307896)); +#307891 = SURFACE_STYLE_USAGE(.BOTH.,#307892); +#307892 = SURFACE_SIDE_STYLE('',(#307893)); +#307893 = SURFACE_STYLE_FILL_AREA(#307894); +#307894 = FILL_AREA_STYLE('',(#307895)); +#307895 = FILL_AREA_STYLE_COLOUR('',#270350); +#307896 = CURVE_STYLE('',#307897,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307897 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307898 = STYLED_ITEM('color',(#307899),#36871); +#307899 = PRESENTATION_STYLE_ASSIGNMENT((#307900,#307905)); +#307900 = SURFACE_STYLE_USAGE(.BOTH.,#307901); +#307901 = SURFACE_SIDE_STYLE('',(#307902)); +#307902 = SURFACE_STYLE_FILL_AREA(#307903); +#307903 = FILL_AREA_STYLE('',(#307904)); +#307904 = FILL_AREA_STYLE_COLOUR('',#270350); +#307905 = CURVE_STYLE('',#307906,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307906 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307907 = STYLED_ITEM('color',(#307908),#36894); +#307908 = PRESENTATION_STYLE_ASSIGNMENT((#307909,#307914)); +#307909 = SURFACE_STYLE_USAGE(.BOTH.,#307910); +#307910 = SURFACE_SIDE_STYLE('',(#307911)); +#307911 = SURFACE_STYLE_FILL_AREA(#307912); +#307912 = FILL_AREA_STYLE('',(#307913)); +#307913 = FILL_AREA_STYLE_COLOUR('',#270350); +#307914 = CURVE_STYLE('',#307915,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307915 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307916 = STYLED_ITEM('color',(#307917),#36917); +#307917 = PRESENTATION_STYLE_ASSIGNMENT((#307918,#307923)); +#307918 = SURFACE_STYLE_USAGE(.BOTH.,#307919); +#307919 = SURFACE_SIDE_STYLE('',(#307920)); +#307920 = SURFACE_STYLE_FILL_AREA(#307921); +#307921 = FILL_AREA_STYLE('',(#307922)); +#307922 = FILL_AREA_STYLE_COLOUR('',#270350); +#307923 = CURVE_STYLE('',#307924,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307924 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307925 = STYLED_ITEM('color',(#307926),#36934); +#307926 = PRESENTATION_STYLE_ASSIGNMENT((#307927,#307932)); +#307927 = SURFACE_STYLE_USAGE(.BOTH.,#307928); +#307928 = SURFACE_SIDE_STYLE('',(#307929)); +#307929 = SURFACE_STYLE_FILL_AREA(#307930); +#307930 = FILL_AREA_STYLE('',(#307931)); +#307931 = FILL_AREA_STYLE_COLOUR('',#270441); +#307932 = CURVE_STYLE('',#307933,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307933 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307934 = STYLED_ITEM('color',(#307935),#36963); +#307935 = PRESENTATION_STYLE_ASSIGNMENT((#307936,#307941)); +#307936 = SURFACE_STYLE_USAGE(.BOTH.,#307937); +#307937 = SURFACE_SIDE_STYLE('',(#307938)); +#307938 = SURFACE_STYLE_FILL_AREA(#307939); +#307939 = FILL_AREA_STYLE('',(#307940)); +#307940 = FILL_AREA_STYLE_COLOUR('',#270350); +#307941 = CURVE_STYLE('',#307942,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307942 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307943 = STYLED_ITEM('color',(#307944),#37017); +#307944 = PRESENTATION_STYLE_ASSIGNMENT((#307945,#307950)); +#307945 = SURFACE_STYLE_USAGE(.BOTH.,#307946); +#307946 = SURFACE_SIDE_STYLE('',(#307947)); +#307947 = SURFACE_STYLE_FILL_AREA(#307948); +#307948 = FILL_AREA_STYLE('',(#307949)); +#307949 = FILL_AREA_STYLE_COLOUR('',#270350); +#307950 = CURVE_STYLE('',#307951,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307951 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307952 = STYLED_ITEM('color',(#307953),#37040); +#307953 = PRESENTATION_STYLE_ASSIGNMENT((#307954,#307959)); +#307954 = SURFACE_STYLE_USAGE(.BOTH.,#307955); +#307955 = SURFACE_SIDE_STYLE('',(#307956)); +#307956 = SURFACE_STYLE_FILL_AREA(#307957); +#307957 = FILL_AREA_STYLE('',(#307958)); +#307958 = FILL_AREA_STYLE_COLOUR('',#270350); +#307959 = CURVE_STYLE('',#307960,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307960 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307961 = STYLED_ITEM('color',(#307962),#37063); +#307962 = PRESENTATION_STYLE_ASSIGNMENT((#307963,#307968)); +#307963 = SURFACE_STYLE_USAGE(.BOTH.,#307964); +#307964 = SURFACE_SIDE_STYLE('',(#307965)); +#307965 = SURFACE_STYLE_FILL_AREA(#307966); +#307966 = FILL_AREA_STYLE('',(#307967)); +#307967 = FILL_AREA_STYLE_COLOUR('',#270350); +#307968 = CURVE_STYLE('',#307969,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307969 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307970 = STYLED_ITEM('color',(#307971),#37086); +#307971 = PRESENTATION_STYLE_ASSIGNMENT((#307972,#307977)); +#307972 = SURFACE_STYLE_USAGE(.BOTH.,#307973); +#307973 = SURFACE_SIDE_STYLE('',(#307974)); +#307974 = SURFACE_STYLE_FILL_AREA(#307975); +#307975 = FILL_AREA_STYLE('',(#307976)); +#307976 = FILL_AREA_STYLE_COLOUR('',#270350); +#307977 = CURVE_STYLE('',#307978,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307978 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307979 = STYLED_ITEM('color',(#307980),#37125); +#307980 = PRESENTATION_STYLE_ASSIGNMENT((#307981,#307986)); +#307981 = SURFACE_STYLE_USAGE(.BOTH.,#307982); +#307982 = SURFACE_SIDE_STYLE('',(#307983)); +#307983 = SURFACE_STYLE_FILL_AREA(#307984); +#307984 = FILL_AREA_STYLE('',(#307985)); +#307985 = FILL_AREA_STYLE_COLOUR('',#270441); +#307986 = CURVE_STYLE('',#307987,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#307987 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307988 = STYLED_ITEM('color',(#307989),#37147); +#307989 = PRESENTATION_STYLE_ASSIGNMENT((#307990,#307995)); +#307990 = SURFACE_STYLE_USAGE(.BOTH.,#307991); +#307991 = SURFACE_SIDE_STYLE('',(#307992)); +#307992 = SURFACE_STYLE_FILL_AREA(#307993); +#307993 = FILL_AREA_STYLE('',(#307994)); +#307994 = FILL_AREA_STYLE_COLOUR('',#270350); +#307995 = CURVE_STYLE('',#307996,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#307996 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#307997 = STYLED_ITEM('color',(#307998),#37191); +#307998 = PRESENTATION_STYLE_ASSIGNMENT((#307999,#308004)); +#307999 = SURFACE_STYLE_USAGE(.BOTH.,#308000); +#308000 = SURFACE_SIDE_STYLE('',(#308001)); +#308001 = SURFACE_STYLE_FILL_AREA(#308002); +#308002 = FILL_AREA_STYLE('',(#308003)); +#308003 = FILL_AREA_STYLE_COLOUR('',#270441); +#308004 = CURVE_STYLE('',#308005,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308005 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308006 = STYLED_ITEM('color',(#308007),#37266); +#308007 = PRESENTATION_STYLE_ASSIGNMENT((#308008,#308013)); +#308008 = SURFACE_STYLE_USAGE(.BOTH.,#308009); +#308009 = SURFACE_SIDE_STYLE('',(#308010)); +#308010 = SURFACE_STYLE_FILL_AREA(#308011); +#308011 = FILL_AREA_STYLE('',(#308012)); +#308012 = FILL_AREA_STYLE_COLOUR('',#270441); +#308013 = CURVE_STYLE('',#308014,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308014 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308015 = STYLED_ITEM('color',(#308016),#37290); +#308016 = PRESENTATION_STYLE_ASSIGNMENT((#308017,#308022)); +#308017 = SURFACE_STYLE_USAGE(.BOTH.,#308018); +#308018 = SURFACE_SIDE_STYLE('',(#308019)); +#308019 = SURFACE_STYLE_FILL_AREA(#308020); +#308020 = FILL_AREA_STYLE('',(#308021)); +#308021 = FILL_AREA_STYLE_COLOUR('',#270441); +#308022 = CURVE_STYLE('',#308023,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308023 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308024 = STYLED_ITEM('color',(#308025),#37358); +#308025 = PRESENTATION_STYLE_ASSIGNMENT((#308026,#308031)); +#308026 = SURFACE_STYLE_USAGE(.BOTH.,#308027); +#308027 = SURFACE_SIDE_STYLE('',(#308028)); +#308028 = SURFACE_STYLE_FILL_AREA(#308029); +#308029 = FILL_AREA_STYLE('',(#308030)); +#308030 = FILL_AREA_STYLE_COLOUR('',#270350); +#308031 = CURVE_STYLE('',#308032,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#308032 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308033 = STYLED_ITEM('color',(#308034),#37375); +#308034 = PRESENTATION_STYLE_ASSIGNMENT((#308035,#308040)); +#308035 = SURFACE_STYLE_USAGE(.BOTH.,#308036); +#308036 = SURFACE_SIDE_STYLE('',(#308037)); +#308037 = SURFACE_STYLE_FILL_AREA(#308038); +#308038 = FILL_AREA_STYLE('',(#308039)); +#308039 = FILL_AREA_STYLE_COLOUR('',#270441); +#308040 = CURVE_STYLE('',#308041,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308041 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308042 = STYLED_ITEM('color',(#308043),#37450); +#308043 = PRESENTATION_STYLE_ASSIGNMENT((#308044,#308049)); +#308044 = SURFACE_STYLE_USAGE(.BOTH.,#308045); +#308045 = SURFACE_SIDE_STYLE('',(#308046)); +#308046 = SURFACE_STYLE_FILL_AREA(#308047); +#308047 = FILL_AREA_STYLE('',(#308048)); +#308048 = FILL_AREA_STYLE_COLOUR('',#270441); +#308049 = CURVE_STYLE('',#308050,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308050 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308051 = STYLED_ITEM('color',(#308052),#37474); +#308052 = PRESENTATION_STYLE_ASSIGNMENT((#308053,#308058)); +#308053 = SURFACE_STYLE_USAGE(.BOTH.,#308054); +#308054 = SURFACE_SIDE_STYLE('',(#308055)); +#308055 = SURFACE_STYLE_FILL_AREA(#308056); +#308056 = FILL_AREA_STYLE('',(#308057)); +#308057 = FILL_AREA_STYLE_COLOUR('',#270441); +#308058 = CURVE_STYLE('',#308059,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308059 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308060 = STYLED_ITEM('color',(#308061),#37542); +#308061 = PRESENTATION_STYLE_ASSIGNMENT((#308062,#308067)); +#308062 = SURFACE_STYLE_USAGE(.BOTH.,#308063); +#308063 = SURFACE_SIDE_STYLE('',(#308064)); +#308064 = SURFACE_STYLE_FILL_AREA(#308065); +#308065 = FILL_AREA_STYLE('',(#308066)); +#308066 = FILL_AREA_STYLE_COLOUR('',#270441); +#308067 = CURVE_STYLE('',#308068,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308068 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308069 = STYLED_ITEM('color',(#308070),#37617); +#308070 = PRESENTATION_STYLE_ASSIGNMENT((#308071,#308076)); +#308071 = SURFACE_STYLE_USAGE(.BOTH.,#308072); +#308072 = SURFACE_SIDE_STYLE('',(#308073)); +#308073 = SURFACE_STYLE_FILL_AREA(#308074); +#308074 = FILL_AREA_STYLE('',(#308075)); +#308075 = FILL_AREA_STYLE_COLOUR('',#270441); +#308076 = CURVE_STYLE('',#308077,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308077 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308078 = STYLED_ITEM('color',(#308079),#37641); +#308079 = PRESENTATION_STYLE_ASSIGNMENT((#308080,#308085)); +#308080 = SURFACE_STYLE_USAGE(.BOTH.,#308081); +#308081 = SURFACE_SIDE_STYLE('',(#308082)); +#308082 = SURFACE_STYLE_FILL_AREA(#308083); +#308083 = FILL_AREA_STYLE('',(#308084)); +#308084 = FILL_AREA_STYLE_COLOUR('',#270441); +#308085 = CURVE_STYLE('',#308086,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308086 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308087 = STYLED_ITEM('color',(#308088),#37709); +#308088 = PRESENTATION_STYLE_ASSIGNMENT((#308089,#308094)); +#308089 = SURFACE_STYLE_USAGE(.BOTH.,#308090); +#308090 = SURFACE_SIDE_STYLE('',(#308091)); +#308091 = SURFACE_STYLE_FILL_AREA(#308092); +#308092 = FILL_AREA_STYLE('',(#308093)); +#308093 = FILL_AREA_STYLE_COLOUR('',#270441); +#308094 = CURVE_STYLE('',#308095,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308095 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308096 = STYLED_ITEM('color',(#308097),#37726); +#308097 = PRESENTATION_STYLE_ASSIGNMENT((#308098,#308103)); +#308098 = SURFACE_STYLE_USAGE(.BOTH.,#308099); +#308099 = SURFACE_SIDE_STYLE('',(#308100)); +#308100 = SURFACE_STYLE_FILL_AREA(#308101); +#308101 = FILL_AREA_STYLE('',(#308102)); +#308102 = FILL_AREA_STYLE_COLOUR('',#270441); +#308103 = CURVE_STYLE('',#308104,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308104 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308105 = STYLED_ITEM('color',(#308106),#37743); +#308106 = PRESENTATION_STYLE_ASSIGNMENT((#308107,#308112)); +#308107 = SURFACE_STYLE_USAGE(.BOTH.,#308108); +#308108 = SURFACE_SIDE_STYLE('',(#308109)); +#308109 = SURFACE_STYLE_FILL_AREA(#308110); +#308110 = FILL_AREA_STYLE('',(#308111)); +#308111 = FILL_AREA_STYLE_COLOUR('',#270350); +#308112 = CURVE_STYLE('',#308113,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#308113 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308114 = STYLED_ITEM('color',(#308115),#37789); +#308115 = PRESENTATION_STYLE_ASSIGNMENT((#308116,#308121)); +#308116 = SURFACE_STYLE_USAGE(.BOTH.,#308117); +#308117 = SURFACE_SIDE_STYLE('',(#308118)); +#308118 = SURFACE_STYLE_FILL_AREA(#308119); +#308119 = FILL_AREA_STYLE('',(#308120)); +#308120 = FILL_AREA_STYLE_COLOUR('',#270350); +#308121 = CURVE_STYLE('',#308122,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#308122 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308123 = STYLED_ITEM('color',(#308124),#37805); +#308124 = PRESENTATION_STYLE_ASSIGNMENT((#308125,#308130)); +#308125 = SURFACE_STYLE_USAGE(.BOTH.,#308126); +#308126 = SURFACE_SIDE_STYLE('',(#308127)); +#308127 = SURFACE_STYLE_FILL_AREA(#308128); +#308128 = FILL_AREA_STYLE('',(#308129)); +#308129 = FILL_AREA_STYLE_COLOUR('',#270350); +#308130 = CURVE_STYLE('',#308131,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#308131 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308132 = STYLED_ITEM('color',(#308133),#37821); +#308133 = PRESENTATION_STYLE_ASSIGNMENT((#308134,#308139)); +#308134 = SURFACE_STYLE_USAGE(.BOTH.,#308135); +#308135 = SURFACE_SIDE_STYLE('',(#308136)); +#308136 = SURFACE_STYLE_FILL_AREA(#308137); +#308137 = FILL_AREA_STYLE('',(#308138)); +#308138 = FILL_AREA_STYLE_COLOUR('',#270441); +#308139 = CURVE_STYLE('',#308140,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308140 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308141 = STYLED_ITEM('color',(#308142),#37838); +#308142 = PRESENTATION_STYLE_ASSIGNMENT((#308143,#308148)); +#308143 = SURFACE_STYLE_USAGE(.BOTH.,#308144); +#308144 = SURFACE_SIDE_STYLE('',(#308145)); +#308145 = SURFACE_STYLE_FILL_AREA(#308146); +#308146 = FILL_AREA_STYLE('',(#308147)); +#308147 = FILL_AREA_STYLE_COLOUR('',#270350); +#308148 = CURVE_STYLE('',#308149,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#308149 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308150 = STYLED_ITEM('color',(#308151),#37850); +#308151 = PRESENTATION_STYLE_ASSIGNMENT((#308152,#308157)); +#308152 = SURFACE_STYLE_USAGE(.BOTH.,#308153); +#308153 = SURFACE_SIDE_STYLE('',(#308154)); +#308154 = SURFACE_STYLE_FILL_AREA(#308155); +#308155 = FILL_AREA_STYLE('',(#308156)); +#308156 = FILL_AREA_STYLE_COLOUR('',#270441); +#308157 = CURVE_STYLE('',#308158,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308158 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308159 = STYLED_ITEM('color',(#308160),#37867); +#308160 = PRESENTATION_STYLE_ASSIGNMENT((#308161,#308166)); +#308161 = SURFACE_STYLE_USAGE(.BOTH.,#308162); +#308162 = SURFACE_SIDE_STYLE('',(#308163)); +#308163 = SURFACE_STYLE_FILL_AREA(#308164); +#308164 = FILL_AREA_STYLE('',(#308165)); +#308165 = FILL_AREA_STYLE_COLOUR('',#270441); +#308166 = CURVE_STYLE('',#308167,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308167 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308168 = STYLED_ITEM('color',(#308169),#37884); +#308169 = PRESENTATION_STYLE_ASSIGNMENT((#308170,#308175)); +#308170 = SURFACE_STYLE_USAGE(.BOTH.,#308171); +#308171 = SURFACE_SIDE_STYLE('',(#308172)); +#308172 = SURFACE_STYLE_FILL_AREA(#308173); +#308173 = FILL_AREA_STYLE('',(#308174)); +#308174 = FILL_AREA_STYLE_COLOUR('',#270441); +#308175 = CURVE_STYLE('',#308176,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308176 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308177 = STYLED_ITEM('color',(#308178),#37901); +#308178 = PRESENTATION_STYLE_ASSIGNMENT((#308179,#308184)); +#308179 = SURFACE_STYLE_USAGE(.BOTH.,#308180); +#308180 = SURFACE_SIDE_STYLE('',(#308181)); +#308181 = SURFACE_STYLE_FILL_AREA(#308182); +#308182 = FILL_AREA_STYLE('',(#308183)); +#308183 = FILL_AREA_STYLE_COLOUR('',#270441); +#308184 = CURVE_STYLE('',#308185,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308185 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308186 = STYLED_ITEM('color',(#308187),#37918); +#308187 = PRESENTATION_STYLE_ASSIGNMENT((#308188,#308193)); +#308188 = SURFACE_STYLE_USAGE(.BOTH.,#308189); +#308189 = SURFACE_SIDE_STYLE('',(#308190)); +#308190 = SURFACE_STYLE_FILL_AREA(#308191); +#308191 = FILL_AREA_STYLE('',(#308192)); +#308192 = FILL_AREA_STYLE_COLOUR('',#270441); +#308193 = CURVE_STYLE('',#308194,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308194 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308195 = STYLED_ITEM('color',(#308196),#37935); +#308196 = PRESENTATION_STYLE_ASSIGNMENT((#308197,#308202)); +#308197 = SURFACE_STYLE_USAGE(.BOTH.,#308198); +#308198 = SURFACE_SIDE_STYLE('',(#308199)); +#308199 = SURFACE_STYLE_FILL_AREA(#308200); +#308200 = FILL_AREA_STYLE('',(#308201)); +#308201 = FILL_AREA_STYLE_COLOUR('',#270441); +#308202 = CURVE_STYLE('',#308203,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308203 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308204 = STYLED_ITEM('color',(#308205),#37952); +#308205 = PRESENTATION_STYLE_ASSIGNMENT((#308206,#308211)); +#308206 = SURFACE_STYLE_USAGE(.BOTH.,#308207); +#308207 = SURFACE_SIDE_STYLE('',(#308208)); +#308208 = SURFACE_STYLE_FILL_AREA(#308209); +#308209 = FILL_AREA_STYLE('',(#308210)); +#308210 = FILL_AREA_STYLE_COLOUR('',#270441); +#308211 = CURVE_STYLE('',#308212,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308212 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308213 = STYLED_ITEM('color',(#308214),#37964); +#308214 = PRESENTATION_STYLE_ASSIGNMENT((#308215,#308220)); +#308215 = SURFACE_STYLE_USAGE(.BOTH.,#308216); +#308216 = SURFACE_SIDE_STYLE('',(#308217)); +#308217 = SURFACE_STYLE_FILL_AREA(#308218); +#308218 = FILL_AREA_STYLE('',(#308219)); +#308219 = FILL_AREA_STYLE_COLOUR('',#270441); +#308220 = CURVE_STYLE('',#308221,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308221 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308222 = STYLED_ITEM('color',(#308223),#37981); +#308223 = PRESENTATION_STYLE_ASSIGNMENT((#308224,#308229)); +#308224 = SURFACE_STYLE_USAGE(.BOTH.,#308225); +#308225 = SURFACE_SIDE_STYLE('',(#308226)); +#308226 = SURFACE_STYLE_FILL_AREA(#308227); +#308227 = FILL_AREA_STYLE('',(#308228)); +#308228 = FILL_AREA_STYLE_COLOUR('',#270441); +#308229 = CURVE_STYLE('',#308230,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308230 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308231 = STYLED_ITEM('color',(#308232),#37998); +#308232 = PRESENTATION_STYLE_ASSIGNMENT((#308233,#308238)); +#308233 = SURFACE_STYLE_USAGE(.BOTH.,#308234); +#308234 = SURFACE_SIDE_STYLE('',(#308235)); +#308235 = SURFACE_STYLE_FILL_AREA(#308236); +#308236 = FILL_AREA_STYLE('',(#308237)); +#308237 = FILL_AREA_STYLE_COLOUR('',#270441); +#308238 = CURVE_STYLE('',#308239,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308239 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308240 = STYLED_ITEM('color',(#308241),#38015); +#308241 = PRESENTATION_STYLE_ASSIGNMENT((#308242,#308247)); +#308242 = SURFACE_STYLE_USAGE(.BOTH.,#308243); +#308243 = SURFACE_SIDE_STYLE('',(#308244)); +#308244 = SURFACE_STYLE_FILL_AREA(#308245); +#308245 = FILL_AREA_STYLE('',(#308246)); +#308246 = FILL_AREA_STYLE_COLOUR('',#270441); +#308247 = CURVE_STYLE('',#308248,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308248 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308249 = STYLED_ITEM('color',(#308250),#38032); +#308250 = PRESENTATION_STYLE_ASSIGNMENT((#308251,#308256)); +#308251 = SURFACE_STYLE_USAGE(.BOTH.,#308252); +#308252 = SURFACE_SIDE_STYLE('',(#308253)); +#308253 = SURFACE_STYLE_FILL_AREA(#308254); +#308254 = FILL_AREA_STYLE('',(#308255)); +#308255 = FILL_AREA_STYLE_COLOUR('',#270441); +#308256 = CURVE_STYLE('',#308257,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308257 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308258 = STYLED_ITEM('color',(#308259),#38049); +#308259 = PRESENTATION_STYLE_ASSIGNMENT((#308260,#308265)); +#308260 = SURFACE_STYLE_USAGE(.BOTH.,#308261); +#308261 = SURFACE_SIDE_STYLE('',(#308262)); +#308262 = SURFACE_STYLE_FILL_AREA(#308263); +#308263 = FILL_AREA_STYLE('',(#308264)); +#308264 = FILL_AREA_STYLE_COLOUR('',#270441); +#308265 = CURVE_STYLE('',#308266,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308266 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308267 = STYLED_ITEM('color',(#308268),#38061); +#308268 = PRESENTATION_STYLE_ASSIGNMENT((#308269,#308274)); +#308269 = SURFACE_STYLE_USAGE(.BOTH.,#308270); +#308270 = SURFACE_SIDE_STYLE('',(#308271)); +#308271 = SURFACE_STYLE_FILL_AREA(#308272); +#308272 = FILL_AREA_STYLE('',(#308273)); +#308273 = FILL_AREA_STYLE_COLOUR('',#270441); +#308274 = CURVE_STYLE('',#308275,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308275 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308276 = STYLED_ITEM('color',(#308277),#38078); +#308277 = PRESENTATION_STYLE_ASSIGNMENT((#308278,#308283)); +#308278 = SURFACE_STYLE_USAGE(.BOTH.,#308279); +#308279 = SURFACE_SIDE_STYLE('',(#308280)); +#308280 = SURFACE_STYLE_FILL_AREA(#308281); +#308281 = FILL_AREA_STYLE('',(#308282)); +#308282 = FILL_AREA_STYLE_COLOUR('',#270441); +#308283 = CURVE_STYLE('',#308284,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308284 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308285 = STYLED_ITEM('color',(#308286),#38095); +#308286 = PRESENTATION_STYLE_ASSIGNMENT((#308287,#308292)); +#308287 = SURFACE_STYLE_USAGE(.BOTH.,#308288); +#308288 = SURFACE_SIDE_STYLE('',(#308289)); +#308289 = SURFACE_STYLE_FILL_AREA(#308290); +#308290 = FILL_AREA_STYLE('',(#308291)); +#308291 = FILL_AREA_STYLE_COLOUR('',#270441); +#308292 = CURVE_STYLE('',#308293,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308293 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308294 = STYLED_ITEM('color',(#308295),#38112); +#308295 = PRESENTATION_STYLE_ASSIGNMENT((#308296,#308301)); +#308296 = SURFACE_STYLE_USAGE(.BOTH.,#308297); +#308297 = SURFACE_SIDE_STYLE('',(#308298)); +#308298 = SURFACE_STYLE_FILL_AREA(#308299); +#308299 = FILL_AREA_STYLE('',(#308300)); +#308300 = FILL_AREA_STYLE_COLOUR('',#270441); +#308301 = CURVE_STYLE('',#308302,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308302 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308303 = STYLED_ITEM('color',(#308304),#38129); +#308304 = PRESENTATION_STYLE_ASSIGNMENT((#308305,#308310)); +#308305 = SURFACE_STYLE_USAGE(.BOTH.,#308306); +#308306 = SURFACE_SIDE_STYLE('',(#308307)); +#308307 = SURFACE_STYLE_FILL_AREA(#308308); +#308308 = FILL_AREA_STYLE('',(#308309)); +#308309 = FILL_AREA_STYLE_COLOUR('',#270441); +#308310 = CURVE_STYLE('',#308311,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308311 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308312 = STYLED_ITEM('color',(#308313),#38146); +#308313 = PRESENTATION_STYLE_ASSIGNMENT((#308314,#308319)); +#308314 = SURFACE_STYLE_USAGE(.BOTH.,#308315); +#308315 = SURFACE_SIDE_STYLE('',(#308316)); +#308316 = SURFACE_STYLE_FILL_AREA(#308317); +#308317 = FILL_AREA_STYLE('',(#308318)); +#308318 = FILL_AREA_STYLE_COLOUR('',#270441); +#308319 = CURVE_STYLE('',#308320,POSITIVE_LENGTH_MEASURE(0.1),#270441); +#308320 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308321 = STYLED_ITEM('color',(#308322),#38158); +#308322 = PRESENTATION_STYLE_ASSIGNMENT((#308323,#308328)); +#308323 = SURFACE_STYLE_USAGE(.BOTH.,#308324); +#308324 = SURFACE_SIDE_STYLE('',(#308325)); +#308325 = SURFACE_STYLE_FILL_AREA(#308326); +#308326 = FILL_AREA_STYLE('',(#308327)); +#308327 = FILL_AREA_STYLE_COLOUR('',#271711); +#308328 = CURVE_STYLE('',#308329,POSITIVE_LENGTH_MEASURE(0.1),#271711); +#308329 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#308330 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #308331,#308338,#308345,#308352,#308359,#308366,#308373,#308380, + #308387,#308394,#308401,#308408,#308415,#308422,#308429,#308436, + #308443,#308450,#308457,#308464,#308471,#308478,#308485,#308492, + #308499,#308506,#308513,#308520,#308527,#308534,#308541,#308548, + #308555,#308562,#308569,#308576,#308583,#308590,#308597,#308604, + #308611,#308618,#308625,#308632,#308639,#308646,#308653,#308660, + #308667,#308674,#308681,#308688,#308695,#308702,#308709,#308716, + #308723,#308730,#308737,#308744,#308751,#308758,#308765,#308772, + #308779,#308786,#308793,#308800,#308807,#308814,#308821,#308828, + #308835,#308842,#308849,#308856,#308863,#308870,#308877,#308884, + #308891,#308898,#308905,#308912,#308919,#308926,#308933,#308940, + #308947,#308954,#308961,#308968,#308975,#308982,#308989,#308996, + #309003,#309010,#309017,#309024,#309031,#309038,#309045,#309052, + #309059,#309066,#309073,#309080,#309087,#309094,#309101,#309108, + #309115,#309122,#309129,#309136,#309143,#309150,#309157,#309164, + #309171,#309178,#309185,#309192,#309199,#309206,#309213,#309220, + #309227,#309234,#309241,#309248,#309255,#309262,#309269,#309276, + #309283,#309290,#309297,#309304,#309311),#10397); +#308331 = STYLED_ITEM('color',(#308332),#6204); +#308332 = PRESENTATION_STYLE_ASSIGNMENT((#308333)); +#308333 = SURFACE_STYLE_USAGE(.BOTH.,#308334); +#308334 = SURFACE_SIDE_STYLE('',(#308335)); +#308335 = SURFACE_STYLE_FILL_AREA(#308336); +#308336 = FILL_AREA_STYLE('',(#308337)); +#308337 = FILL_AREA_STYLE_COLOUR('',#295381); +#308338 = STYLED_ITEM('color',(#308339),#6276); +#308339 = PRESENTATION_STYLE_ASSIGNMENT((#308340)); +#308340 = SURFACE_STYLE_USAGE(.BOTH.,#308341); +#308341 = SURFACE_SIDE_STYLE('',(#308342)); +#308342 = SURFACE_STYLE_FILL_AREA(#308343); +#308343 = FILL_AREA_STYLE('',(#308344)); +#308344 = FILL_AREA_STYLE_COLOUR('',#295381); +#308345 = STYLED_ITEM('color',(#308346),#6315); +#308346 = PRESENTATION_STYLE_ASSIGNMENT((#308347)); +#308347 = SURFACE_STYLE_USAGE(.BOTH.,#308348); +#308348 = SURFACE_SIDE_STYLE('',(#308349)); +#308349 = SURFACE_STYLE_FILL_AREA(#308350); +#308350 = FILL_AREA_STYLE('',(#308351)); +#308351 = FILL_AREA_STYLE_COLOUR('',#295381); +#308352 = STYLED_ITEM('color',(#308353),#6339); +#308353 = PRESENTATION_STYLE_ASSIGNMENT((#308354)); +#308354 = SURFACE_STYLE_USAGE(.BOTH.,#308355); +#308355 = SURFACE_SIDE_STYLE('',(#308356)); +#308356 = SURFACE_STYLE_FILL_AREA(#308357); +#308357 = FILL_AREA_STYLE('',(#308358)); +#308358 = FILL_AREA_STYLE_COLOUR('',#295381); +#308359 = STYLED_ITEM('color',(#308360),#6404); +#308360 = PRESENTATION_STYLE_ASSIGNMENT((#308361)); +#308361 = SURFACE_STYLE_USAGE(.BOTH.,#308362); +#308362 = SURFACE_SIDE_STYLE('',(#308363)); +#308363 = SURFACE_STYLE_FILL_AREA(#308364); +#308364 = FILL_AREA_STYLE('',(#308365)); +#308365 = FILL_AREA_STYLE_COLOUR('',#295381); +#308366 = STYLED_ITEM('color',(#308367),#6428); +#308367 = PRESENTATION_STYLE_ASSIGNMENT((#308368)); +#308368 = SURFACE_STYLE_USAGE(.BOTH.,#308369); +#308369 = SURFACE_SIDE_STYLE('',(#308370)); +#308370 = SURFACE_STYLE_FILL_AREA(#308371); +#308371 = FILL_AREA_STYLE('',(#308372)); +#308372 = FILL_AREA_STYLE_COLOUR('',#295381); +#308373 = STYLED_ITEM('color',(#308374),#6580); +#308374 = PRESENTATION_STYLE_ASSIGNMENT((#308375)); +#308375 = SURFACE_STYLE_USAGE(.BOTH.,#308376); +#308376 = SURFACE_SIDE_STYLE('',(#308377)); +#308377 = SURFACE_STYLE_FILL_AREA(#308378); +#308378 = FILL_AREA_STYLE('',(#308379)); +#308379 = FILL_AREA_STYLE_COLOUR('',#295381); +#308380 = STYLED_ITEM('color',(#308381),#6604); +#308381 = PRESENTATION_STYLE_ASSIGNMENT((#308382)); +#308382 = SURFACE_STYLE_USAGE(.BOTH.,#308383); +#308383 = SURFACE_SIDE_STYLE('',(#308384)); +#308384 = SURFACE_STYLE_FILL_AREA(#308385); +#308385 = FILL_AREA_STYLE('',(#308386)); +#308386 = FILL_AREA_STYLE_COLOUR('',#295381); +#308387 = STYLED_ITEM('color',(#308388),#6669); +#308388 = PRESENTATION_STYLE_ASSIGNMENT((#308389)); +#308389 = SURFACE_STYLE_USAGE(.BOTH.,#308390); +#308390 = SURFACE_SIDE_STYLE('',(#308391)); +#308391 = SURFACE_STYLE_FILL_AREA(#308392); +#308392 = FILL_AREA_STYLE('',(#308393)); +#308393 = FILL_AREA_STYLE_COLOUR('',#295381); +#308394 = STYLED_ITEM('color',(#308395),#6694); +#308395 = PRESENTATION_STYLE_ASSIGNMENT((#308396)); +#308396 = SURFACE_STYLE_USAGE(.BOTH.,#308397); +#308397 = SURFACE_SIDE_STYLE('',(#308398)); +#308398 = SURFACE_STYLE_FILL_AREA(#308399); +#308399 = FILL_AREA_STYLE('',(#308400)); +#308400 = FILL_AREA_STYLE_COLOUR('',#295381); +#308401 = STYLED_ITEM('color',(#308402),#6743); +#308402 = PRESENTATION_STYLE_ASSIGNMENT((#308403)); +#308403 = SURFACE_STYLE_USAGE(.BOTH.,#308404); +#308404 = SURFACE_SIDE_STYLE('',(#308405)); +#308405 = SURFACE_STYLE_FILL_AREA(#308406); +#308406 = FILL_AREA_STYLE('',(#308407)); +#308407 = FILL_AREA_STYLE_COLOUR('',#295381); +#308408 = STYLED_ITEM('color',(#308409),#6760); +#308409 = PRESENTATION_STYLE_ASSIGNMENT((#308410)); +#308410 = SURFACE_STYLE_USAGE(.BOTH.,#308411); +#308411 = SURFACE_SIDE_STYLE('',(#308412)); +#308412 = SURFACE_STYLE_FILL_AREA(#308413); +#308413 = FILL_AREA_STYLE('',(#308414)); +#308414 = FILL_AREA_STYLE_COLOUR('',#295381); +#308415 = STYLED_ITEM('color',(#308416),#6784); +#308416 = PRESENTATION_STYLE_ASSIGNMENT((#308417)); +#308417 = SURFACE_STYLE_USAGE(.BOTH.,#308418); +#308418 = SURFACE_SIDE_STYLE('',(#308419)); +#308419 = SURFACE_STYLE_FILL_AREA(#308420); +#308420 = FILL_AREA_STYLE('',(#308421)); +#308421 = FILL_AREA_STYLE_COLOUR('',#295381); +#308422 = STYLED_ITEM('color',(#308423),#6801); +#308423 = PRESENTATION_STYLE_ASSIGNMENT((#308424)); +#308424 = SURFACE_STYLE_USAGE(.BOTH.,#308425); +#308425 = SURFACE_SIDE_STYLE('',(#308426)); +#308426 = SURFACE_STYLE_FILL_AREA(#308427); +#308427 = FILL_AREA_STYLE('',(#308428)); +#308428 = FILL_AREA_STYLE_COLOUR('',#295381); +#308429 = STYLED_ITEM('color',(#308430),#6971); +#308430 = PRESENTATION_STYLE_ASSIGNMENT((#308431)); +#308431 = SURFACE_STYLE_USAGE(.BOTH.,#308432); +#308432 = SURFACE_SIDE_STYLE('',(#308433)); +#308433 = SURFACE_STYLE_FILL_AREA(#308434); +#308434 = FILL_AREA_STYLE('',(#308435)); +#308435 = FILL_AREA_STYLE_COLOUR('',#295381); +#308436 = STYLED_ITEM('color',(#308437),#6995); +#308437 = PRESENTATION_STYLE_ASSIGNMENT((#308438)); +#308438 = SURFACE_STYLE_USAGE(.BOTH.,#308439); +#308439 = SURFACE_SIDE_STYLE('',(#308440)); +#308440 = SURFACE_STYLE_FILL_AREA(#308441); +#308441 = FILL_AREA_STYLE('',(#308442)); +#308442 = FILL_AREA_STYLE_COLOUR('',#295381); +#308443 = STYLED_ITEM('color',(#308444),#7261); +#308444 = PRESENTATION_STYLE_ASSIGNMENT((#308445)); +#308445 = SURFACE_STYLE_USAGE(.BOTH.,#308446); +#308446 = SURFACE_SIDE_STYLE('',(#308447)); +#308447 = SURFACE_STYLE_FILL_AREA(#308448); +#308448 = FILL_AREA_STYLE('',(#308449)); +#308449 = FILL_AREA_STYLE_COLOUR('',#295381); +#308450 = STYLED_ITEM('color',(#308451),#7285); +#308451 = PRESENTATION_STYLE_ASSIGNMENT((#308452)); +#308452 = SURFACE_STYLE_USAGE(.BOTH.,#308453); +#308453 = SURFACE_SIDE_STYLE('',(#308454)); +#308454 = SURFACE_STYLE_FILL_AREA(#308455); +#308455 = FILL_AREA_STYLE('',(#308456)); +#308456 = FILL_AREA_STYLE_COLOUR('',#295381); +#308457 = STYLED_ITEM('color',(#308458),#7318); +#308458 = PRESENTATION_STYLE_ASSIGNMENT((#308459)); +#308459 = SURFACE_STYLE_USAGE(.BOTH.,#308460); +#308460 = SURFACE_SIDE_STYLE('',(#308461)); +#308461 = SURFACE_STYLE_FILL_AREA(#308462); +#308462 = FILL_AREA_STYLE('',(#308463)); +#308463 = FILL_AREA_STYLE_COLOUR('',#295381); +#308464 = STYLED_ITEM('color',(#308465),#7342); +#308465 = PRESENTATION_STYLE_ASSIGNMENT((#308466)); +#308466 = SURFACE_STYLE_USAGE(.BOTH.,#308467); +#308467 = SURFACE_SIDE_STYLE('',(#308468)); +#308468 = SURFACE_STYLE_FILL_AREA(#308469); +#308469 = FILL_AREA_STYLE('',(#308470)); +#308470 = FILL_AREA_STYLE_COLOUR('',#295381); +#308471 = STYLED_ITEM('color',(#308472),#7373); +#308472 = PRESENTATION_STYLE_ASSIGNMENT((#308473)); +#308473 = SURFACE_STYLE_USAGE(.BOTH.,#308474); +#308474 = SURFACE_SIDE_STYLE('',(#308475)); +#308475 = SURFACE_STYLE_FILL_AREA(#308476); +#308476 = FILL_AREA_STYLE('',(#308477)); +#308477 = FILL_AREA_STYLE_COLOUR('',#295381); +#308478 = STYLED_ITEM('color',(#308479),#7390); +#308479 = PRESENTATION_STYLE_ASSIGNMENT((#308480)); +#308480 = SURFACE_STYLE_USAGE(.BOTH.,#308481); +#308481 = SURFACE_SIDE_STYLE('',(#308482)); +#308482 = SURFACE_STYLE_FILL_AREA(#308483); +#308483 = FILL_AREA_STYLE('',(#308484)); +#308484 = FILL_AREA_STYLE_COLOUR('',#295381); +#308485 = STYLED_ITEM('color',(#308486),#7423); +#308486 = PRESENTATION_STYLE_ASSIGNMENT((#308487)); +#308487 = SURFACE_STYLE_USAGE(.BOTH.,#308488); +#308488 = SURFACE_SIDE_STYLE('',(#308489)); +#308489 = SURFACE_STYLE_FILL_AREA(#308490); +#308490 = FILL_AREA_STYLE('',(#308491)); +#308491 = FILL_AREA_STYLE_COLOUR('',#295381); +#308492 = STYLED_ITEM('color',(#308493),#7447); +#308493 = PRESENTATION_STYLE_ASSIGNMENT((#308494)); +#308494 = SURFACE_STYLE_USAGE(.BOTH.,#308495); +#308495 = SURFACE_SIDE_STYLE('',(#308496)); +#308496 = SURFACE_STYLE_FILL_AREA(#308497); +#308497 = FILL_AREA_STYLE('',(#308498)); +#308498 = FILL_AREA_STYLE_COLOUR('',#295381); +#308499 = STYLED_ITEM('color',(#308500),#7478); +#308500 = PRESENTATION_STYLE_ASSIGNMENT((#308501)); +#308501 = SURFACE_STYLE_USAGE(.BOTH.,#308502); +#308502 = SURFACE_SIDE_STYLE('',(#308503)); +#308503 = SURFACE_STYLE_FILL_AREA(#308504); +#308504 = FILL_AREA_STYLE('',(#308505)); +#308505 = FILL_AREA_STYLE_COLOUR('',#295381); +#308506 = STYLED_ITEM('color',(#308507),#7495); +#308507 = PRESENTATION_STYLE_ASSIGNMENT((#308508)); +#308508 = SURFACE_STYLE_USAGE(.BOTH.,#308509); +#308509 = SURFACE_SIDE_STYLE('',(#308510)); +#308510 = SURFACE_STYLE_FILL_AREA(#308511); +#308511 = FILL_AREA_STYLE('',(#308512)); +#308512 = FILL_AREA_STYLE_COLOUR('',#295381); +#308513 = STYLED_ITEM('color',(#308514),#7528); +#308514 = PRESENTATION_STYLE_ASSIGNMENT((#308515)); +#308515 = SURFACE_STYLE_USAGE(.BOTH.,#308516); +#308516 = SURFACE_SIDE_STYLE('',(#308517)); +#308517 = SURFACE_STYLE_FILL_AREA(#308518); +#308518 = FILL_AREA_STYLE('',(#308519)); +#308519 = FILL_AREA_STYLE_COLOUR('',#295381); +#308520 = STYLED_ITEM('color',(#308521),#7552); +#308521 = PRESENTATION_STYLE_ASSIGNMENT((#308522)); +#308522 = SURFACE_STYLE_USAGE(.BOTH.,#308523); +#308523 = SURFACE_SIDE_STYLE('',(#308524)); +#308524 = SURFACE_STYLE_FILL_AREA(#308525); +#308525 = FILL_AREA_STYLE('',(#308526)); +#308526 = FILL_AREA_STYLE_COLOUR('',#295381); +#308527 = STYLED_ITEM('color',(#308528),#7583); +#308528 = PRESENTATION_STYLE_ASSIGNMENT((#308529)); +#308529 = SURFACE_STYLE_USAGE(.BOTH.,#308530); +#308530 = SURFACE_SIDE_STYLE('',(#308531)); +#308531 = SURFACE_STYLE_FILL_AREA(#308532); +#308532 = FILL_AREA_STYLE('',(#308533)); +#308533 = FILL_AREA_STYLE_COLOUR('',#295381); +#308534 = STYLED_ITEM('color',(#308535),#7600); +#308535 = PRESENTATION_STYLE_ASSIGNMENT((#308536)); +#308536 = SURFACE_STYLE_USAGE(.BOTH.,#308537); +#308537 = SURFACE_SIDE_STYLE('',(#308538)); +#308538 = SURFACE_STYLE_FILL_AREA(#308539); +#308539 = FILL_AREA_STYLE('',(#308540)); +#308540 = FILL_AREA_STYLE_COLOUR('',#295381); +#308541 = STYLED_ITEM('color',(#308542),#7633); +#308542 = PRESENTATION_STYLE_ASSIGNMENT((#308543)); +#308543 = SURFACE_STYLE_USAGE(.BOTH.,#308544); +#308544 = SURFACE_SIDE_STYLE('',(#308545)); +#308545 = SURFACE_STYLE_FILL_AREA(#308546); +#308546 = FILL_AREA_STYLE('',(#308547)); +#308547 = FILL_AREA_STYLE_COLOUR('',#295381); +#308548 = STYLED_ITEM('color',(#308549),#7657); +#308549 = PRESENTATION_STYLE_ASSIGNMENT((#308550)); +#308550 = SURFACE_STYLE_USAGE(.BOTH.,#308551); +#308551 = SURFACE_SIDE_STYLE('',(#308552)); +#308552 = SURFACE_STYLE_FILL_AREA(#308553); +#308553 = FILL_AREA_STYLE('',(#308554)); +#308554 = FILL_AREA_STYLE_COLOUR('',#295381); +#308555 = STYLED_ITEM('color',(#308556),#7688); +#308556 = PRESENTATION_STYLE_ASSIGNMENT((#308557)); +#308557 = SURFACE_STYLE_USAGE(.BOTH.,#308558); +#308558 = SURFACE_SIDE_STYLE('',(#308559)); +#308559 = SURFACE_STYLE_FILL_AREA(#308560); +#308560 = FILL_AREA_STYLE('',(#308561)); +#308561 = FILL_AREA_STYLE_COLOUR('',#295381); +#308562 = STYLED_ITEM('color',(#308563),#7700); +#308563 = PRESENTATION_STYLE_ASSIGNMENT((#308564)); +#308564 = SURFACE_STYLE_USAGE(.BOTH.,#308565); +#308565 = SURFACE_SIDE_STYLE('',(#308566)); +#308566 = SURFACE_STYLE_FILL_AREA(#308567); +#308567 = FILL_AREA_STYLE('',(#308568)); +#308568 = FILL_AREA_STYLE_COLOUR('',#295381); +#308569 = STYLED_ITEM('color',(#308570),#7733); +#308570 = PRESENTATION_STYLE_ASSIGNMENT((#308571)); +#308571 = SURFACE_STYLE_USAGE(.BOTH.,#308572); +#308572 = SURFACE_SIDE_STYLE('',(#308573)); +#308573 = SURFACE_STYLE_FILL_AREA(#308574); +#308574 = FILL_AREA_STYLE('',(#308575)); +#308575 = FILL_AREA_STYLE_COLOUR('',#295381); +#308576 = STYLED_ITEM('color',(#308577),#7750); +#308577 = PRESENTATION_STYLE_ASSIGNMENT((#308578)); +#308578 = SURFACE_STYLE_USAGE(.BOTH.,#308579); +#308579 = SURFACE_SIDE_STYLE('',(#308580)); +#308580 = SURFACE_STYLE_FILL_AREA(#308581); +#308581 = FILL_AREA_STYLE('',(#308582)); +#308582 = FILL_AREA_STYLE_COLOUR('',#295381); +#308583 = STYLED_ITEM('color',(#308584),#7767); +#308584 = PRESENTATION_STYLE_ASSIGNMENT((#308585)); +#308585 = SURFACE_STYLE_USAGE(.BOTH.,#308586); +#308586 = SURFACE_SIDE_STYLE('',(#308587)); +#308587 = SURFACE_STYLE_FILL_AREA(#308588); +#308588 = FILL_AREA_STYLE('',(#308589)); +#308589 = FILL_AREA_STYLE_COLOUR('',#295381); +#308590 = STYLED_ITEM('color',(#308591),#7779); +#308591 = PRESENTATION_STYLE_ASSIGNMENT((#308592)); +#308592 = SURFACE_STYLE_USAGE(.BOTH.,#308593); +#308593 = SURFACE_SIDE_STYLE('',(#308594)); +#308594 = SURFACE_STYLE_FILL_AREA(#308595); +#308595 = FILL_AREA_STYLE('',(#308596)); +#308596 = FILL_AREA_STYLE_COLOUR('',#295381); +#308597 = STYLED_ITEM('color',(#308598),#7927); +#308598 = PRESENTATION_STYLE_ASSIGNMENT((#308599)); +#308599 = SURFACE_STYLE_USAGE(.BOTH.,#308600); +#308600 = SURFACE_SIDE_STYLE('',(#308601)); +#308601 = SURFACE_STYLE_FILL_AREA(#308602); +#308602 = FILL_AREA_STYLE('',(#308603)); +#308603 = FILL_AREA_STYLE_COLOUR('',#295381); +#308604 = STYLED_ITEM('color',(#308605),#7944); +#308605 = PRESENTATION_STYLE_ASSIGNMENT((#308606)); +#308606 = SURFACE_STYLE_USAGE(.BOTH.,#308607); +#308607 = SURFACE_SIDE_STYLE('',(#308608)); +#308608 = SURFACE_STYLE_FILL_AREA(#308609); +#308609 = FILL_AREA_STYLE('',(#308610)); +#308610 = FILL_AREA_STYLE_COLOUR('',#295381); +#308611 = STYLED_ITEM('color',(#308612),#7961); +#308612 = PRESENTATION_STYLE_ASSIGNMENT((#308613)); +#308613 = SURFACE_STYLE_USAGE(.BOTH.,#308614); +#308614 = SURFACE_SIDE_STYLE('',(#308615)); +#308615 = SURFACE_STYLE_FILL_AREA(#308616); +#308616 = FILL_AREA_STYLE('',(#308617)); +#308617 = FILL_AREA_STYLE_COLOUR('',#295381); +#308618 = STYLED_ITEM('color',(#308619),#7978); +#308619 = PRESENTATION_STYLE_ASSIGNMENT((#308620)); +#308620 = SURFACE_STYLE_USAGE(.BOTH.,#308621); +#308621 = SURFACE_SIDE_STYLE('',(#308622)); +#308622 = SURFACE_STYLE_FILL_AREA(#308623); +#308623 = FILL_AREA_STYLE('',(#308624)); +#308624 = FILL_AREA_STYLE_COLOUR('',#295381); +#308625 = STYLED_ITEM('color',(#308626),#7995); +#308626 = PRESENTATION_STYLE_ASSIGNMENT((#308627)); +#308627 = SURFACE_STYLE_USAGE(.BOTH.,#308628); +#308628 = SURFACE_SIDE_STYLE('',(#308629)); +#308629 = SURFACE_STYLE_FILL_AREA(#308630); +#308630 = FILL_AREA_STYLE('',(#308631)); +#308631 = FILL_AREA_STYLE_COLOUR('',#295381); +#308632 = STYLED_ITEM('color',(#308633),#8012); +#308633 = PRESENTATION_STYLE_ASSIGNMENT((#308634)); +#308634 = SURFACE_STYLE_USAGE(.BOTH.,#308635); +#308635 = SURFACE_SIDE_STYLE('',(#308636)); +#308636 = SURFACE_STYLE_FILL_AREA(#308637); +#308637 = FILL_AREA_STYLE('',(#308638)); +#308638 = FILL_AREA_STYLE_COLOUR('',#295381); +#308639 = STYLED_ITEM('color',(#308640),#8029); +#308640 = PRESENTATION_STYLE_ASSIGNMENT((#308641)); +#308641 = SURFACE_STYLE_USAGE(.BOTH.,#308642); +#308642 = SURFACE_SIDE_STYLE('',(#308643)); +#308643 = SURFACE_STYLE_FILL_AREA(#308644); +#308644 = FILL_AREA_STYLE('',(#308645)); +#308645 = FILL_AREA_STYLE_COLOUR('',#295381); +#308646 = STYLED_ITEM('color',(#308647),#8046); +#308647 = PRESENTATION_STYLE_ASSIGNMENT((#308648)); +#308648 = SURFACE_STYLE_USAGE(.BOTH.,#308649); +#308649 = SURFACE_SIDE_STYLE('',(#308650)); +#308650 = SURFACE_STYLE_FILL_AREA(#308651); +#308651 = FILL_AREA_STYLE('',(#308652)); +#308652 = FILL_AREA_STYLE_COLOUR('',#295381); +#308653 = STYLED_ITEM('color',(#308654),#8063); +#308654 = PRESENTATION_STYLE_ASSIGNMENT((#308655)); +#308655 = SURFACE_STYLE_USAGE(.BOTH.,#308656); +#308656 = SURFACE_SIDE_STYLE('',(#308657)); +#308657 = SURFACE_STYLE_FILL_AREA(#308658); +#308658 = FILL_AREA_STYLE('',(#308659)); +#308659 = FILL_AREA_STYLE_COLOUR('',#295381); +#308660 = STYLED_ITEM('color',(#308661),#8080); +#308661 = PRESENTATION_STYLE_ASSIGNMENT((#308662)); +#308662 = SURFACE_STYLE_USAGE(.BOTH.,#308663); +#308663 = SURFACE_SIDE_STYLE('',(#308664)); +#308664 = SURFACE_STYLE_FILL_AREA(#308665); +#308665 = FILL_AREA_STYLE('',(#308666)); +#308666 = FILL_AREA_STYLE_COLOUR('',#295381); +#308667 = STYLED_ITEM('color',(#308668),#8097); +#308668 = PRESENTATION_STYLE_ASSIGNMENT((#308669)); +#308669 = SURFACE_STYLE_USAGE(.BOTH.,#308670); +#308670 = SURFACE_SIDE_STYLE('',(#308671)); +#308671 = SURFACE_STYLE_FILL_AREA(#308672); +#308672 = FILL_AREA_STYLE('',(#308673)); +#308673 = FILL_AREA_STYLE_COLOUR('',#295381); +#308674 = STYLED_ITEM('color',(#308675),#8114); +#308675 = PRESENTATION_STYLE_ASSIGNMENT((#308676)); +#308676 = SURFACE_STYLE_USAGE(.BOTH.,#308677); +#308677 = SURFACE_SIDE_STYLE('',(#308678)); +#308678 = SURFACE_STYLE_FILL_AREA(#308679); +#308679 = FILL_AREA_STYLE('',(#308680)); +#308680 = FILL_AREA_STYLE_COLOUR('',#295381); +#308681 = STYLED_ITEM('color',(#308682),#8131); +#308682 = PRESENTATION_STYLE_ASSIGNMENT((#308683)); +#308683 = SURFACE_STYLE_USAGE(.BOTH.,#308684); +#308684 = SURFACE_SIDE_STYLE('',(#308685)); +#308685 = SURFACE_STYLE_FILL_AREA(#308686); +#308686 = FILL_AREA_STYLE('',(#308687)); +#308687 = FILL_AREA_STYLE_COLOUR('',#295381); +#308688 = STYLED_ITEM('color',(#308689),#8148); +#308689 = PRESENTATION_STYLE_ASSIGNMENT((#308690)); +#308690 = SURFACE_STYLE_USAGE(.BOTH.,#308691); +#308691 = SURFACE_SIDE_STYLE('',(#308692)); +#308692 = SURFACE_STYLE_FILL_AREA(#308693); +#308693 = FILL_AREA_STYLE('',(#308694)); +#308694 = FILL_AREA_STYLE_COLOUR('',#295381); +#308695 = STYLED_ITEM('color',(#308696),#8165); +#308696 = PRESENTATION_STYLE_ASSIGNMENT((#308697)); +#308697 = SURFACE_STYLE_USAGE(.BOTH.,#308698); +#308698 = SURFACE_SIDE_STYLE('',(#308699)); +#308699 = SURFACE_STYLE_FILL_AREA(#308700); +#308700 = FILL_AREA_STYLE('',(#308701)); +#308701 = FILL_AREA_STYLE_COLOUR('',#295381); +#308702 = STYLED_ITEM('color',(#308703),#8177); +#308703 = PRESENTATION_STYLE_ASSIGNMENT((#308704)); +#308704 = SURFACE_STYLE_USAGE(.BOTH.,#308705); +#308705 = SURFACE_SIDE_STYLE('',(#308706)); +#308706 = SURFACE_STYLE_FILL_AREA(#308707); +#308707 = FILL_AREA_STYLE('',(#308708)); +#308708 = FILL_AREA_STYLE_COLOUR('',#295381); +#308709 = STYLED_ITEM('color',(#308710),#8194); +#308710 = PRESENTATION_STYLE_ASSIGNMENT((#308711)); +#308711 = SURFACE_STYLE_USAGE(.BOTH.,#308712); +#308712 = SURFACE_SIDE_STYLE('',(#308713)); +#308713 = SURFACE_STYLE_FILL_AREA(#308714); +#308714 = FILL_AREA_STYLE('',(#308715)); +#308715 = FILL_AREA_STYLE_COLOUR('',#295381); +#308716 = STYLED_ITEM('color',(#308717),#8211); +#308717 = PRESENTATION_STYLE_ASSIGNMENT((#308718)); +#308718 = SURFACE_STYLE_USAGE(.BOTH.,#308719); +#308719 = SURFACE_SIDE_STYLE('',(#308720)); +#308720 = SURFACE_STYLE_FILL_AREA(#308721); +#308721 = FILL_AREA_STYLE('',(#308722)); +#308722 = FILL_AREA_STYLE_COLOUR('',#295381); +#308723 = STYLED_ITEM('color',(#308724),#8228); +#308724 = PRESENTATION_STYLE_ASSIGNMENT((#308725)); +#308725 = SURFACE_STYLE_USAGE(.BOTH.,#308726); +#308726 = SURFACE_SIDE_STYLE('',(#308727)); +#308727 = SURFACE_STYLE_FILL_AREA(#308728); +#308728 = FILL_AREA_STYLE('',(#308729)); +#308729 = FILL_AREA_STYLE_COLOUR('',#295381); +#308730 = STYLED_ITEM('color',(#308731),#8245); +#308731 = PRESENTATION_STYLE_ASSIGNMENT((#308732)); +#308732 = SURFACE_STYLE_USAGE(.BOTH.,#308733); +#308733 = SURFACE_SIDE_STYLE('',(#308734)); +#308734 = SURFACE_STYLE_FILL_AREA(#308735); +#308735 = FILL_AREA_STYLE('',(#308736)); +#308736 = FILL_AREA_STYLE_COLOUR('',#295381); +#308737 = STYLED_ITEM('color',(#308738),#8291); +#308738 = PRESENTATION_STYLE_ASSIGNMENT((#308739)); +#308739 = SURFACE_STYLE_USAGE(.BOTH.,#308740); +#308740 = SURFACE_SIDE_STYLE('',(#308741)); +#308741 = SURFACE_STYLE_FILL_AREA(#308742); +#308742 = FILL_AREA_STYLE('',(#308743)); +#308743 = FILL_AREA_STYLE_COLOUR('',#295381); +#308744 = STYLED_ITEM('color',(#308745),#8337); +#308745 = PRESENTATION_STYLE_ASSIGNMENT((#308746)); +#308746 = SURFACE_STYLE_USAGE(.BOTH.,#308747); +#308747 = SURFACE_SIDE_STYLE('',(#308748)); +#308748 = SURFACE_STYLE_FILL_AREA(#308749); +#308749 = FILL_AREA_STYLE('',(#308750)); +#308750 = FILL_AREA_STYLE_COLOUR('',#295381); +#308751 = STYLED_ITEM('color',(#308752),#8383); +#308752 = PRESENTATION_STYLE_ASSIGNMENT((#308753)); +#308753 = SURFACE_STYLE_USAGE(.BOTH.,#308754); +#308754 = SURFACE_SIDE_STYLE('',(#308755)); +#308755 = SURFACE_STYLE_FILL_AREA(#308756); +#308756 = FILL_AREA_STYLE('',(#308757)); +#308757 = FILL_AREA_STYLE_COLOUR('',#295381); +#308758 = STYLED_ITEM('color',(#308759),#8429); +#308759 = PRESENTATION_STYLE_ASSIGNMENT((#308760)); +#308760 = SURFACE_STYLE_USAGE(.BOTH.,#308761); +#308761 = SURFACE_SIDE_STYLE('',(#308762)); +#308762 = SURFACE_STYLE_FILL_AREA(#308763); +#308763 = FILL_AREA_STYLE('',(#308764)); +#308764 = FILL_AREA_STYLE_COLOUR('',#295697); +#308765 = STYLED_ITEM('color',(#308766),#8460); +#308766 = PRESENTATION_STYLE_ASSIGNMENT((#308767)); +#308767 = SURFACE_STYLE_USAGE(.BOTH.,#308768); +#308768 = SURFACE_SIDE_STYLE('',(#308769)); +#308769 = SURFACE_STYLE_FILL_AREA(#308770); +#308770 = FILL_AREA_STYLE('',(#308771)); +#308771 = FILL_AREA_STYLE_COLOUR('',#295697); +#308772 = STYLED_ITEM('color',(#308773),#8484); +#308773 = PRESENTATION_STYLE_ASSIGNMENT((#308774)); +#308774 = SURFACE_STYLE_USAGE(.BOTH.,#308775); +#308775 = SURFACE_SIDE_STYLE('',(#308776)); +#308776 = SURFACE_STYLE_FILL_AREA(#308777); +#308777 = FILL_AREA_STYLE('',(#308778)); +#308778 = FILL_AREA_STYLE_COLOUR('',#295697); +#308779 = STYLED_ITEM('color',(#308780),#8508); +#308780 = PRESENTATION_STYLE_ASSIGNMENT((#308781)); +#308781 = SURFACE_STYLE_USAGE(.BOTH.,#308782); +#308782 = SURFACE_SIDE_STYLE('',(#308783)); +#308783 = SURFACE_STYLE_FILL_AREA(#308784); +#308784 = FILL_AREA_STYLE('',(#308785)); +#308785 = FILL_AREA_STYLE_COLOUR('',#295697); +#308786 = STYLED_ITEM('color',(#308787),#8525); +#308787 = PRESENTATION_STYLE_ASSIGNMENT((#308788)); +#308788 = SURFACE_STYLE_USAGE(.BOTH.,#308789); +#308789 = SURFACE_SIDE_STYLE('',(#308790)); +#308790 = SURFACE_STYLE_FILL_AREA(#308791); +#308791 = FILL_AREA_STYLE('',(#308792)); +#308792 = FILL_AREA_STYLE_COLOUR('',#295697); +#308793 = STYLED_ITEM('color',(#308794),#8556); +#308794 = PRESENTATION_STYLE_ASSIGNMENT((#308795)); +#308795 = SURFACE_STYLE_USAGE(.BOTH.,#308796); +#308796 = SURFACE_SIDE_STYLE('',(#308797)); +#308797 = SURFACE_STYLE_FILL_AREA(#308798); +#308798 = FILL_AREA_STYLE('',(#308799)); +#308799 = FILL_AREA_STYLE_COLOUR('',#295697); +#308800 = STYLED_ITEM('color',(#308801),#8580); +#308801 = PRESENTATION_STYLE_ASSIGNMENT((#308802)); +#308802 = SURFACE_STYLE_USAGE(.BOTH.,#308803); +#308803 = SURFACE_SIDE_STYLE('',(#308804)); +#308804 = SURFACE_STYLE_FILL_AREA(#308805); +#308805 = FILL_AREA_STYLE('',(#308806)); +#308806 = FILL_AREA_STYLE_COLOUR('',#295697); +#308807 = STYLED_ITEM('color',(#308808),#8604); +#308808 = PRESENTATION_STYLE_ASSIGNMENT((#308809)); +#308809 = SURFACE_STYLE_USAGE(.BOTH.,#308810); +#308810 = SURFACE_SIDE_STYLE('',(#308811)); +#308811 = SURFACE_STYLE_FILL_AREA(#308812); +#308812 = FILL_AREA_STYLE('',(#308813)); +#308813 = FILL_AREA_STYLE_COLOUR('',#295697); +#308814 = STYLED_ITEM('color',(#308815),#8621); +#308815 = PRESENTATION_STYLE_ASSIGNMENT((#308816)); +#308816 = SURFACE_STYLE_USAGE(.BOTH.,#308817); +#308817 = SURFACE_SIDE_STYLE('',(#308818)); +#308818 = SURFACE_STYLE_FILL_AREA(#308819); +#308819 = FILL_AREA_STYLE('',(#308820)); +#308820 = FILL_AREA_STYLE_COLOUR('',#295697); +#308821 = STYLED_ITEM('color',(#308822),#8652); +#308822 = PRESENTATION_STYLE_ASSIGNMENT((#308823)); +#308823 = SURFACE_STYLE_USAGE(.BOTH.,#308824); +#308824 = SURFACE_SIDE_STYLE('',(#308825)); +#308825 = SURFACE_STYLE_FILL_AREA(#308826); +#308826 = FILL_AREA_STYLE('',(#308827)); +#308827 = FILL_AREA_STYLE_COLOUR('',#295697); +#308828 = STYLED_ITEM('color',(#308829),#8676); +#308829 = PRESENTATION_STYLE_ASSIGNMENT((#308830)); +#308830 = SURFACE_STYLE_USAGE(.BOTH.,#308831); +#308831 = SURFACE_SIDE_STYLE('',(#308832)); +#308832 = SURFACE_STYLE_FILL_AREA(#308833); +#308833 = FILL_AREA_STYLE('',(#308834)); +#308834 = FILL_AREA_STYLE_COLOUR('',#295697); +#308835 = STYLED_ITEM('color',(#308836),#8700); +#308836 = PRESENTATION_STYLE_ASSIGNMENT((#308837)); +#308837 = SURFACE_STYLE_USAGE(.BOTH.,#308838); +#308838 = SURFACE_SIDE_STYLE('',(#308839)); +#308839 = SURFACE_STYLE_FILL_AREA(#308840); +#308840 = FILL_AREA_STYLE('',(#308841)); +#308841 = FILL_AREA_STYLE_COLOUR('',#295697); +#308842 = STYLED_ITEM('color',(#308843),#8717); +#308843 = PRESENTATION_STYLE_ASSIGNMENT((#308844)); +#308844 = SURFACE_STYLE_USAGE(.BOTH.,#308845); +#308845 = SURFACE_SIDE_STYLE('',(#308846)); +#308846 = SURFACE_STYLE_FILL_AREA(#308847); +#308847 = FILL_AREA_STYLE('',(#308848)); +#308848 = FILL_AREA_STYLE_COLOUR('',#295697); +#308849 = STYLED_ITEM('color',(#308850),#8748); +#308850 = PRESENTATION_STYLE_ASSIGNMENT((#308851)); +#308851 = SURFACE_STYLE_USAGE(.BOTH.,#308852); +#308852 = SURFACE_SIDE_STYLE('',(#308853)); +#308853 = SURFACE_STYLE_FILL_AREA(#308854); +#308854 = FILL_AREA_STYLE('',(#308855)); +#308855 = FILL_AREA_STYLE_COLOUR('',#295697); +#308856 = STYLED_ITEM('color',(#308857),#8772); +#308857 = PRESENTATION_STYLE_ASSIGNMENT((#308858)); +#308858 = SURFACE_STYLE_USAGE(.BOTH.,#308859); +#308859 = SURFACE_SIDE_STYLE('',(#308860)); +#308860 = SURFACE_STYLE_FILL_AREA(#308861); +#308861 = FILL_AREA_STYLE('',(#308862)); +#308862 = FILL_AREA_STYLE_COLOUR('',#295697); +#308863 = STYLED_ITEM('color',(#308864),#8796); +#308864 = PRESENTATION_STYLE_ASSIGNMENT((#308865)); +#308865 = SURFACE_STYLE_USAGE(.BOTH.,#308866); +#308866 = SURFACE_SIDE_STYLE('',(#308867)); +#308867 = SURFACE_STYLE_FILL_AREA(#308868); +#308868 = FILL_AREA_STYLE('',(#308869)); +#308869 = FILL_AREA_STYLE_COLOUR('',#295697); +#308870 = STYLED_ITEM('color',(#308871),#8813); +#308871 = PRESENTATION_STYLE_ASSIGNMENT((#308872)); +#308872 = SURFACE_STYLE_USAGE(.BOTH.,#308873); +#308873 = SURFACE_SIDE_STYLE('',(#308874)); +#308874 = SURFACE_STYLE_FILL_AREA(#308875); +#308875 = FILL_AREA_STYLE('',(#308876)); +#308876 = FILL_AREA_STYLE_COLOUR('',#295697); +#308877 = STYLED_ITEM('color',(#308878),#8876); +#308878 = PRESENTATION_STYLE_ASSIGNMENT((#308879)); +#308879 = SURFACE_STYLE_USAGE(.BOTH.,#308880); +#308880 = SURFACE_SIDE_STYLE('',(#308881)); +#308881 = SURFACE_STYLE_FILL_AREA(#308882); +#308882 = FILL_AREA_STYLE('',(#308883)); +#308883 = FILL_AREA_STYLE_COLOUR('',#295697); +#308884 = STYLED_ITEM('color',(#308885),#8900); +#308885 = PRESENTATION_STYLE_ASSIGNMENT((#308886)); +#308886 = SURFACE_STYLE_USAGE(.BOTH.,#308887); +#308887 = SURFACE_SIDE_STYLE('',(#308888)); +#308888 = SURFACE_STYLE_FILL_AREA(#308889); +#308889 = FILL_AREA_STYLE('',(#308890)); +#308890 = FILL_AREA_STYLE_COLOUR('',#295697); +#308891 = STYLED_ITEM('color',(#308892),#8956); +#308892 = PRESENTATION_STYLE_ASSIGNMENT((#308893)); +#308893 = SURFACE_STYLE_USAGE(.BOTH.,#308894); +#308894 = SURFACE_SIDE_STYLE('',(#308895)); +#308895 = SURFACE_STYLE_FILL_AREA(#308896); +#308896 = FILL_AREA_STYLE('',(#308897)); +#308897 = FILL_AREA_STYLE_COLOUR('',#295697); +#308898 = STYLED_ITEM('color',(#308899),#8973); +#308899 = PRESENTATION_STYLE_ASSIGNMENT((#308900)); +#308900 = SURFACE_STYLE_USAGE(.BOTH.,#308901); +#308901 = SURFACE_SIDE_STYLE('',(#308902)); +#308902 = SURFACE_STYLE_FILL_AREA(#308903); +#308903 = FILL_AREA_STYLE('',(#308904)); +#308904 = FILL_AREA_STYLE_COLOUR('',#295697); +#308905 = STYLED_ITEM('color',(#308906),#9004); +#308906 = PRESENTATION_STYLE_ASSIGNMENT((#308907)); +#308907 = SURFACE_STYLE_USAGE(.BOTH.,#308908); +#308908 = SURFACE_SIDE_STYLE('',(#308909)); +#308909 = SURFACE_STYLE_FILL_AREA(#308910); +#308910 = FILL_AREA_STYLE('',(#308911)); +#308911 = FILL_AREA_STYLE_COLOUR('',#295697); +#308912 = STYLED_ITEM('color',(#308913),#9028); +#308913 = PRESENTATION_STYLE_ASSIGNMENT((#308914)); +#308914 = SURFACE_STYLE_USAGE(.BOTH.,#308915); +#308915 = SURFACE_SIDE_STYLE('',(#308916)); +#308916 = SURFACE_STYLE_FILL_AREA(#308917); +#308917 = FILL_AREA_STYLE('',(#308918)); +#308918 = FILL_AREA_STYLE_COLOUR('',#295697); +#308919 = STYLED_ITEM('color',(#308920),#9052); +#308920 = PRESENTATION_STYLE_ASSIGNMENT((#308921)); +#308921 = SURFACE_STYLE_USAGE(.BOTH.,#308922); +#308922 = SURFACE_SIDE_STYLE('',(#308923)); +#308923 = SURFACE_STYLE_FILL_AREA(#308924); +#308924 = FILL_AREA_STYLE('',(#308925)); +#308925 = FILL_AREA_STYLE_COLOUR('',#295697); +#308926 = STYLED_ITEM('color',(#308927),#9069); +#308927 = PRESENTATION_STYLE_ASSIGNMENT((#308928)); +#308928 = SURFACE_STYLE_USAGE(.BOTH.,#308929); +#308929 = SURFACE_SIDE_STYLE('',(#308930)); +#308930 = SURFACE_STYLE_FILL_AREA(#308931); +#308931 = FILL_AREA_STYLE('',(#308932)); +#308932 = FILL_AREA_STYLE_COLOUR('',#295697); +#308933 = STYLED_ITEM('color',(#308934),#9100); +#308934 = PRESENTATION_STYLE_ASSIGNMENT((#308935)); +#308935 = SURFACE_STYLE_USAGE(.BOTH.,#308936); +#308936 = SURFACE_SIDE_STYLE('',(#308937)); +#308937 = SURFACE_STYLE_FILL_AREA(#308938); +#308938 = FILL_AREA_STYLE('',(#308939)); +#308939 = FILL_AREA_STYLE_COLOUR('',#295697); +#308940 = STYLED_ITEM('color',(#308941),#9124); +#308941 = PRESENTATION_STYLE_ASSIGNMENT((#308942)); +#308942 = SURFACE_STYLE_USAGE(.BOTH.,#308943); +#308943 = SURFACE_SIDE_STYLE('',(#308944)); +#308944 = SURFACE_STYLE_FILL_AREA(#308945); +#308945 = FILL_AREA_STYLE('',(#308946)); +#308946 = FILL_AREA_STYLE_COLOUR('',#295697); +#308947 = STYLED_ITEM('color',(#308948),#9148); +#308948 = PRESENTATION_STYLE_ASSIGNMENT((#308949)); +#308949 = SURFACE_STYLE_USAGE(.BOTH.,#308950); +#308950 = SURFACE_SIDE_STYLE('',(#308951)); +#308951 = SURFACE_STYLE_FILL_AREA(#308952); +#308952 = FILL_AREA_STYLE('',(#308953)); +#308953 = FILL_AREA_STYLE_COLOUR('',#295697); +#308954 = STYLED_ITEM('color',(#308955),#9165); +#308955 = PRESENTATION_STYLE_ASSIGNMENT((#308956)); +#308956 = SURFACE_STYLE_USAGE(.BOTH.,#308957); +#308957 = SURFACE_SIDE_STYLE('',(#308958)); +#308958 = SURFACE_STYLE_FILL_AREA(#308959); +#308959 = FILL_AREA_STYLE('',(#308960)); +#308960 = FILL_AREA_STYLE_COLOUR('',#295697); +#308961 = STYLED_ITEM('color',(#308962),#9196); +#308962 = PRESENTATION_STYLE_ASSIGNMENT((#308963)); +#308963 = SURFACE_STYLE_USAGE(.BOTH.,#308964); +#308964 = SURFACE_SIDE_STYLE('',(#308965)); +#308965 = SURFACE_STYLE_FILL_AREA(#308966); +#308966 = FILL_AREA_STYLE('',(#308967)); +#308967 = FILL_AREA_STYLE_COLOUR('',#295697); +#308968 = STYLED_ITEM('color',(#308969),#9252); +#308969 = PRESENTATION_STYLE_ASSIGNMENT((#308970)); +#308970 = SURFACE_STYLE_USAGE(.BOTH.,#308971); +#308971 = SURFACE_SIDE_STYLE('',(#308972)); +#308972 = SURFACE_STYLE_FILL_AREA(#308973); +#308973 = FILL_AREA_STYLE('',(#308974)); +#308974 = FILL_AREA_STYLE_COLOUR('',#295697); +#308975 = STYLED_ITEM('color',(#308976),#9276); +#308976 = PRESENTATION_STYLE_ASSIGNMENT((#308977)); +#308977 = SURFACE_STYLE_USAGE(.BOTH.,#308978); +#308978 = SURFACE_SIDE_STYLE('',(#308979)); +#308979 = SURFACE_STYLE_FILL_AREA(#308980); +#308980 = FILL_AREA_STYLE('',(#308981)); +#308981 = FILL_AREA_STYLE_COLOUR('',#295697); +#308982 = STYLED_ITEM('color',(#308983),#9325); +#308983 = PRESENTATION_STYLE_ASSIGNMENT((#308984)); +#308984 = SURFACE_STYLE_USAGE(.BOTH.,#308985); +#308985 = SURFACE_SIDE_STYLE('',(#308986)); +#308986 = SURFACE_STYLE_FILL_AREA(#308987); +#308987 = FILL_AREA_STYLE('',(#308988)); +#308988 = FILL_AREA_STYLE_COLOUR('',#295697); +#308989 = STYLED_ITEM('color',(#308990),#9356); +#308990 = PRESENTATION_STYLE_ASSIGNMENT((#308991)); +#308991 = SURFACE_STYLE_USAGE(.BOTH.,#308992); +#308992 = SURFACE_SIDE_STYLE('',(#308993)); +#308993 = SURFACE_STYLE_FILL_AREA(#308994); +#308994 = FILL_AREA_STYLE('',(#308995)); +#308995 = FILL_AREA_STYLE_COLOUR('',#295697); +#308996 = STYLED_ITEM('color',(#308997),#9380); +#308997 = PRESENTATION_STYLE_ASSIGNMENT((#308998)); +#308998 = SURFACE_STYLE_USAGE(.BOTH.,#308999); +#308999 = SURFACE_SIDE_STYLE('',(#309000)); +#309000 = SURFACE_STYLE_FILL_AREA(#309001); +#309001 = FILL_AREA_STYLE('',(#309002)); +#309002 = FILL_AREA_STYLE_COLOUR('',#295697); +#309003 = STYLED_ITEM('color',(#309004),#9404); +#309004 = PRESENTATION_STYLE_ASSIGNMENT((#309005)); +#309005 = SURFACE_STYLE_USAGE(.BOTH.,#309006); +#309006 = SURFACE_SIDE_STYLE('',(#309007)); +#309007 = SURFACE_STYLE_FILL_AREA(#309008); +#309008 = FILL_AREA_STYLE('',(#309009)); +#309009 = FILL_AREA_STYLE_COLOUR('',#295697); +#309010 = STYLED_ITEM('color',(#309011),#9421); +#309011 = PRESENTATION_STYLE_ASSIGNMENT((#309012)); +#309012 = SURFACE_STYLE_USAGE(.BOTH.,#309013); +#309013 = SURFACE_SIDE_STYLE('',(#309014)); +#309014 = SURFACE_STYLE_FILL_AREA(#309015); +#309015 = FILL_AREA_STYLE('',(#309016)); +#309016 = FILL_AREA_STYLE_COLOUR('',#295697); +#309017 = STYLED_ITEM('color',(#309018),#9452); +#309018 = PRESENTATION_STYLE_ASSIGNMENT((#309019)); +#309019 = SURFACE_STYLE_USAGE(.BOTH.,#309020); +#309020 = SURFACE_SIDE_STYLE('',(#309021)); +#309021 = SURFACE_STYLE_FILL_AREA(#309022); +#309022 = FILL_AREA_STYLE('',(#309023)); +#309023 = FILL_AREA_STYLE_COLOUR('',#295697); +#309024 = STYLED_ITEM('color',(#309025),#9476); +#309025 = PRESENTATION_STYLE_ASSIGNMENT((#309026)); +#309026 = SURFACE_STYLE_USAGE(.BOTH.,#309027); +#309027 = SURFACE_SIDE_STYLE('',(#309028)); +#309028 = SURFACE_STYLE_FILL_AREA(#309029); +#309029 = FILL_AREA_STYLE('',(#309030)); +#309030 = FILL_AREA_STYLE_COLOUR('',#295697); +#309031 = STYLED_ITEM('color',(#309032),#9500); +#309032 = PRESENTATION_STYLE_ASSIGNMENT((#309033)); +#309033 = SURFACE_STYLE_USAGE(.BOTH.,#309034); +#309034 = SURFACE_SIDE_STYLE('',(#309035)); +#309035 = SURFACE_STYLE_FILL_AREA(#309036); +#309036 = FILL_AREA_STYLE('',(#309037)); +#309037 = FILL_AREA_STYLE_COLOUR('',#295697); +#309038 = STYLED_ITEM('color',(#309039),#9517); +#309039 = PRESENTATION_STYLE_ASSIGNMENT((#309040)); +#309040 = SURFACE_STYLE_USAGE(.BOTH.,#309041); +#309041 = SURFACE_SIDE_STYLE('',(#309042)); +#309042 = SURFACE_STYLE_FILL_AREA(#309043); +#309043 = FILL_AREA_STYLE('',(#309044)); +#309044 = FILL_AREA_STYLE_COLOUR('',#295697); +#309045 = STYLED_ITEM('color',(#309046),#9548); +#309046 = PRESENTATION_STYLE_ASSIGNMENT((#309047)); +#309047 = SURFACE_STYLE_USAGE(.BOTH.,#309048); +#309048 = SURFACE_SIDE_STYLE('',(#309049)); +#309049 = SURFACE_STYLE_FILL_AREA(#309050); +#309050 = FILL_AREA_STYLE('',(#309051)); +#309051 = FILL_AREA_STYLE_COLOUR('',#295697); +#309052 = STYLED_ITEM('color',(#309053),#9572); +#309053 = PRESENTATION_STYLE_ASSIGNMENT((#309054)); +#309054 = SURFACE_STYLE_USAGE(.BOTH.,#309055); +#309055 = SURFACE_SIDE_STYLE('',(#309056)); +#309056 = SURFACE_STYLE_FILL_AREA(#309057); +#309057 = FILL_AREA_STYLE('',(#309058)); +#309058 = FILL_AREA_STYLE_COLOUR('',#295697); +#309059 = STYLED_ITEM('color',(#309060),#9596); +#309060 = PRESENTATION_STYLE_ASSIGNMENT((#309061)); +#309061 = SURFACE_STYLE_USAGE(.BOTH.,#309062); +#309062 = SURFACE_SIDE_STYLE('',(#309063)); +#309063 = SURFACE_STYLE_FILL_AREA(#309064); +#309064 = FILL_AREA_STYLE('',(#309065)); +#309065 = FILL_AREA_STYLE_COLOUR('',#295697); +#309066 = STYLED_ITEM('color',(#309067),#9613); +#309067 = PRESENTATION_STYLE_ASSIGNMENT((#309068)); +#309068 = SURFACE_STYLE_USAGE(.BOTH.,#309069); +#309069 = SURFACE_SIDE_STYLE('',(#309070)); +#309070 = SURFACE_STYLE_FILL_AREA(#309071); +#309071 = FILL_AREA_STYLE('',(#309072)); +#309072 = FILL_AREA_STYLE_COLOUR('',#295697); +#309073 = STYLED_ITEM('color',(#309074),#9644); +#309074 = PRESENTATION_STYLE_ASSIGNMENT((#309075)); +#309075 = SURFACE_STYLE_USAGE(.BOTH.,#309076); +#309076 = SURFACE_SIDE_STYLE('',(#309077)); +#309077 = SURFACE_STYLE_FILL_AREA(#309078); +#309078 = FILL_AREA_STYLE('',(#309079)); +#309079 = FILL_AREA_STYLE_COLOUR('',#295697); +#309080 = STYLED_ITEM('color',(#309081),#9668); +#309081 = PRESENTATION_STYLE_ASSIGNMENT((#309082)); +#309082 = SURFACE_STYLE_USAGE(.BOTH.,#309083); +#309083 = SURFACE_SIDE_STYLE('',(#309084)); +#309084 = SURFACE_STYLE_FILL_AREA(#309085); +#309085 = FILL_AREA_STYLE('',(#309086)); +#309086 = FILL_AREA_STYLE_COLOUR('',#295697); +#309087 = STYLED_ITEM('color',(#309088),#9692); +#309088 = PRESENTATION_STYLE_ASSIGNMENT((#309089)); +#309089 = SURFACE_STYLE_USAGE(.BOTH.,#309090); +#309090 = SURFACE_SIDE_STYLE('',(#309091)); +#309091 = SURFACE_STYLE_FILL_AREA(#309092); +#309092 = FILL_AREA_STYLE('',(#309093)); +#309093 = FILL_AREA_STYLE_COLOUR('',#295697); +#309094 = STYLED_ITEM('color',(#309095),#9709); +#309095 = PRESENTATION_STYLE_ASSIGNMENT((#309096)); +#309096 = SURFACE_STYLE_USAGE(.BOTH.,#309097); +#309097 = SURFACE_SIDE_STYLE('',(#309098)); +#309098 = SURFACE_STYLE_FILL_AREA(#309099); +#309099 = FILL_AREA_STYLE('',(#309100)); +#309100 = FILL_AREA_STYLE_COLOUR('',#295697); +#309101 = STYLED_ITEM('color',(#309102),#9756); +#309102 = PRESENTATION_STYLE_ASSIGNMENT((#309103)); +#309103 = SURFACE_STYLE_USAGE(.BOTH.,#309104); +#309104 = SURFACE_SIDE_STYLE('',(#309105)); +#309105 = SURFACE_STYLE_FILL_AREA(#309106); +#309106 = FILL_AREA_STYLE('',(#309107)); +#309107 = FILL_AREA_STYLE_COLOUR('',#295697); +#309108 = STYLED_ITEM('color',(#309109),#9787); +#309109 = PRESENTATION_STYLE_ASSIGNMENT((#309110)); +#309110 = SURFACE_STYLE_USAGE(.BOTH.,#309111); +#309111 = SURFACE_SIDE_STYLE('',(#309112)); +#309112 = SURFACE_STYLE_FILL_AREA(#309113); +#309113 = FILL_AREA_STYLE('',(#309114)); +#309114 = FILL_AREA_STYLE_COLOUR('',#295697); +#309115 = STYLED_ITEM('color',(#309116),#9799); +#309116 = PRESENTATION_STYLE_ASSIGNMENT((#309117)); +#309117 = SURFACE_STYLE_USAGE(.BOTH.,#309118); +#309118 = SURFACE_SIDE_STYLE('',(#309119)); +#309119 = SURFACE_STYLE_FILL_AREA(#309120); +#309120 = FILL_AREA_STYLE('',(#309121)); +#309121 = FILL_AREA_STYLE_COLOUR('',#295697); +#309122 = STYLED_ITEM('color',(#309123),#9816); +#309123 = PRESENTATION_STYLE_ASSIGNMENT((#309124)); +#309124 = SURFACE_STYLE_USAGE(.BOTH.,#309125); +#309125 = SURFACE_SIDE_STYLE('',(#309126)); +#309126 = SURFACE_STYLE_FILL_AREA(#309127); +#309127 = FILL_AREA_STYLE('',(#309128)); +#309128 = FILL_AREA_STYLE_COLOUR('',#295697); +#309129 = STYLED_ITEM('color',(#309130),#9842); +#309130 = PRESENTATION_STYLE_ASSIGNMENT((#309131)); +#309131 = SURFACE_STYLE_USAGE(.BOTH.,#309132); +#309132 = SURFACE_SIDE_STYLE('',(#309133)); +#309133 = SURFACE_STYLE_FILL_AREA(#309134); +#309134 = FILL_AREA_STYLE('',(#309135)); +#309135 = FILL_AREA_STYLE_COLOUR('',#295697); +#309136 = STYLED_ITEM('color',(#309137),#9875); +#309137 = PRESENTATION_STYLE_ASSIGNMENT((#309138)); +#309138 = SURFACE_STYLE_USAGE(.BOTH.,#309139); +#309139 = SURFACE_SIDE_STYLE('',(#309140)); +#309140 = SURFACE_STYLE_FILL_AREA(#309141); +#309141 = FILL_AREA_STYLE('',(#309142)); +#309142 = FILL_AREA_STYLE_COLOUR('',#295697); +#309143 = STYLED_ITEM('color',(#309144),#9906); +#309144 = PRESENTATION_STYLE_ASSIGNMENT((#309145)); +#309145 = SURFACE_STYLE_USAGE(.BOTH.,#309146); +#309146 = SURFACE_SIDE_STYLE('',(#309147)); +#309147 = SURFACE_STYLE_FILL_AREA(#309148); +#309148 = FILL_AREA_STYLE('',(#309149)); +#309149 = FILL_AREA_STYLE_COLOUR('',#295697); +#309150 = STYLED_ITEM('color',(#309151),#9930); +#309151 = PRESENTATION_STYLE_ASSIGNMENT((#309152)); +#309152 = SURFACE_STYLE_USAGE(.BOTH.,#309153); +#309153 = SURFACE_SIDE_STYLE('',(#309154)); +#309154 = SURFACE_STYLE_FILL_AREA(#309155); +#309155 = FILL_AREA_STYLE('',(#309156)); +#309156 = FILL_AREA_STYLE_COLOUR('',#295697); +#309157 = STYLED_ITEM('color',(#309158),#9954); +#309158 = PRESENTATION_STYLE_ASSIGNMENT((#309159)); +#309159 = SURFACE_STYLE_USAGE(.BOTH.,#309160); +#309160 = SURFACE_SIDE_STYLE('',(#309161)); +#309161 = SURFACE_STYLE_FILL_AREA(#309162); +#309162 = FILL_AREA_STYLE('',(#309163)); +#309163 = FILL_AREA_STYLE_COLOUR('',#295697); +#309164 = STYLED_ITEM('color',(#309165),#9971); +#309165 = PRESENTATION_STYLE_ASSIGNMENT((#309166)); +#309166 = SURFACE_STYLE_USAGE(.BOTH.,#309167); +#309167 = SURFACE_SIDE_STYLE('',(#309168)); +#309168 = SURFACE_STYLE_FILL_AREA(#309169); +#309169 = FILL_AREA_STYLE('',(#309170)); +#309170 = FILL_AREA_STYLE_COLOUR('',#295697); +#309171 = STYLED_ITEM('color',(#309172),#10002); +#309172 = PRESENTATION_STYLE_ASSIGNMENT((#309173)); +#309173 = SURFACE_STYLE_USAGE(.BOTH.,#309174); +#309174 = SURFACE_SIDE_STYLE('',(#309175)); +#309175 = SURFACE_STYLE_FILL_AREA(#309176); +#309176 = FILL_AREA_STYLE('',(#309177)); +#309177 = FILL_AREA_STYLE_COLOUR('',#295697); +#309178 = STYLED_ITEM('color',(#309179),#10026); +#309179 = PRESENTATION_STYLE_ASSIGNMENT((#309180)); +#309180 = SURFACE_STYLE_USAGE(.BOTH.,#309181); +#309181 = SURFACE_SIDE_STYLE('',(#309182)); +#309182 = SURFACE_STYLE_FILL_AREA(#309183); +#309183 = FILL_AREA_STYLE('',(#309184)); +#309184 = FILL_AREA_STYLE_COLOUR('',#295697); +#309185 = STYLED_ITEM('color',(#309186),#10050); +#309186 = PRESENTATION_STYLE_ASSIGNMENT((#309187)); +#309187 = SURFACE_STYLE_USAGE(.BOTH.,#309188); +#309188 = SURFACE_SIDE_STYLE('',(#309189)); +#309189 = SURFACE_STYLE_FILL_AREA(#309190); +#309190 = FILL_AREA_STYLE('',(#309191)); +#309191 = FILL_AREA_STYLE_COLOUR('',#295697); +#309192 = STYLED_ITEM('color',(#309193),#10067); +#309193 = PRESENTATION_STYLE_ASSIGNMENT((#309194)); +#309194 = SURFACE_STYLE_USAGE(.BOTH.,#309195); +#309195 = SURFACE_SIDE_STYLE('',(#309196)); +#309196 = SURFACE_STYLE_FILL_AREA(#309197); +#309197 = FILL_AREA_STYLE('',(#309198)); +#309198 = FILL_AREA_STYLE_COLOUR('',#295697); +#309199 = STYLED_ITEM('color',(#309200),#10084); +#309200 = PRESENTATION_STYLE_ASSIGNMENT((#309201)); +#309201 = SURFACE_STYLE_USAGE(.BOTH.,#309202); +#309202 = SURFACE_SIDE_STYLE('',(#309203)); +#309203 = SURFACE_STYLE_FILL_AREA(#309204); +#309204 = FILL_AREA_STYLE('',(#309205)); +#309205 = FILL_AREA_STYLE_COLOUR('',#295697); +#309206 = STYLED_ITEM('color',(#309207),#10131); +#309207 = PRESENTATION_STYLE_ASSIGNMENT((#309208)); +#309208 = SURFACE_STYLE_USAGE(.BOTH.,#309209); +#309209 = SURFACE_SIDE_STYLE('',(#309210)); +#309210 = SURFACE_STYLE_FILL_AREA(#309211); +#309211 = FILL_AREA_STYLE('',(#309212)); +#309212 = FILL_AREA_STYLE_COLOUR('',#295697); +#309213 = STYLED_ITEM('color',(#309214),#10157); +#309214 = PRESENTATION_STYLE_ASSIGNMENT((#309215)); +#309215 = SURFACE_STYLE_USAGE(.BOTH.,#309216); +#309216 = SURFACE_SIDE_STYLE('',(#309217)); +#309217 = SURFACE_STYLE_FILL_AREA(#309218); +#309218 = FILL_AREA_STYLE('',(#309219)); +#309219 = FILL_AREA_STYLE_COLOUR('',#295697); +#309220 = STYLED_ITEM('color',(#309221),#10174); +#309221 = PRESENTATION_STYLE_ASSIGNMENT((#309222)); +#309222 = SURFACE_STYLE_USAGE(.BOTH.,#309223); +#309223 = SURFACE_SIDE_STYLE('',(#309224)); +#309224 = SURFACE_STYLE_FILL_AREA(#309225); +#309225 = FILL_AREA_STYLE('',(#309226)); +#309226 = FILL_AREA_STYLE_COLOUR('',#295697); +#309227 = STYLED_ITEM('color',(#309228),#10200); +#309228 = PRESENTATION_STYLE_ASSIGNMENT((#309229)); +#309229 = SURFACE_STYLE_USAGE(.BOTH.,#309230); +#309230 = SURFACE_SIDE_STYLE('',(#309231)); +#309231 = SURFACE_STYLE_FILL_AREA(#309232); +#309232 = FILL_AREA_STYLE('',(#309233)); +#309233 = FILL_AREA_STYLE_COLOUR('',#295697); +#309234 = STYLED_ITEM('color',(#309235),#10233); +#309235 = PRESENTATION_STYLE_ASSIGNMENT((#309236)); +#309236 = SURFACE_STYLE_USAGE(.BOTH.,#309237); +#309237 = SURFACE_SIDE_STYLE('',(#309238)); +#309238 = SURFACE_STYLE_FILL_AREA(#309239); +#309239 = FILL_AREA_STYLE('',(#309240)); +#309240 = FILL_AREA_STYLE_COLOUR('',#295697); +#309241 = STYLED_ITEM('color',(#309242),#10245); +#309242 = PRESENTATION_STYLE_ASSIGNMENT((#309243)); +#309243 = SURFACE_STYLE_USAGE(.BOTH.,#309244); +#309244 = SURFACE_SIDE_STYLE('',(#309245)); +#309245 = SURFACE_STYLE_FILL_AREA(#309246); +#309246 = FILL_AREA_STYLE('',(#309247)); +#309247 = FILL_AREA_STYLE_COLOUR('',#295697); +#309248 = STYLED_ITEM('color',(#309249),#10257); +#309249 = PRESENTATION_STYLE_ASSIGNMENT((#309250)); +#309250 = SURFACE_STYLE_USAGE(.BOTH.,#309251); +#309251 = SURFACE_SIDE_STYLE('',(#309252)); +#309252 = SURFACE_STYLE_FILL_AREA(#309253); +#309253 = FILL_AREA_STYLE('',(#309254)); +#309254 = FILL_AREA_STYLE_COLOUR('',#295697); +#309255 = STYLED_ITEM('color',(#309256),#10269); +#309256 = PRESENTATION_STYLE_ASSIGNMENT((#309257)); +#309257 = SURFACE_STYLE_USAGE(.BOTH.,#309258); +#309258 = SURFACE_SIDE_STYLE('',(#309259)); +#309259 = SURFACE_STYLE_FILL_AREA(#309260); +#309260 = FILL_AREA_STYLE('',(#309261)); +#309261 = FILL_AREA_STYLE_COLOUR('',#295697); +#309262 = STYLED_ITEM('color',(#309263),#10281); +#309263 = PRESENTATION_STYLE_ASSIGNMENT((#309264)); +#309264 = SURFACE_STYLE_USAGE(.BOTH.,#309265); +#309265 = SURFACE_SIDE_STYLE('',(#309266)); +#309266 = SURFACE_STYLE_FILL_AREA(#309267); +#309267 = FILL_AREA_STYLE('',(#309268)); +#309268 = FILL_AREA_STYLE_COLOUR('',#295697); +#309269 = STYLED_ITEM('color',(#309270),#10298); +#309270 = PRESENTATION_STYLE_ASSIGNMENT((#309271)); +#309271 = SURFACE_STYLE_USAGE(.BOTH.,#309272); +#309272 = SURFACE_SIDE_STYLE('',(#309273)); +#309273 = SURFACE_STYLE_FILL_AREA(#309274); +#309274 = FILL_AREA_STYLE('',(#309275)); +#309275 = FILL_AREA_STYLE_COLOUR('',#295697); +#309276 = STYLED_ITEM('color',(#309277),#10315); +#309277 = PRESENTATION_STYLE_ASSIGNMENT((#309278)); +#309278 = SURFACE_STYLE_USAGE(.BOTH.,#309279); +#309279 = SURFACE_SIDE_STYLE('',(#309280)); +#309280 = SURFACE_STYLE_FILL_AREA(#309281); +#309281 = FILL_AREA_STYLE('',(#309282)); +#309282 = FILL_AREA_STYLE_COLOUR('',#295697); +#309283 = STYLED_ITEM('color',(#309284),#10327); +#309284 = PRESENTATION_STYLE_ASSIGNMENT((#309285)); +#309285 = SURFACE_STYLE_USAGE(.BOTH.,#309286); +#309286 = SURFACE_SIDE_STYLE('',(#309287)); +#309287 = SURFACE_STYLE_FILL_AREA(#309288); +#309288 = FILL_AREA_STYLE('',(#309289)); +#309289 = FILL_AREA_STYLE_COLOUR('',#295697); +#309290 = STYLED_ITEM('color',(#309291),#10339); +#309291 = PRESENTATION_STYLE_ASSIGNMENT((#309292)); +#309292 = SURFACE_STYLE_USAGE(.BOTH.,#309293); +#309293 = SURFACE_SIDE_STYLE('',(#309294)); +#309294 = SURFACE_STYLE_FILL_AREA(#309295); +#309295 = FILL_AREA_STYLE('',(#309296)); +#309296 = FILL_AREA_STYLE_COLOUR('',#295697); +#309297 = STYLED_ITEM('color',(#309298),#10351); +#309298 = PRESENTATION_STYLE_ASSIGNMENT((#309299)); +#309299 = SURFACE_STYLE_USAGE(.BOTH.,#309300); +#309300 = SURFACE_SIDE_STYLE('',(#309301)); +#309301 = SURFACE_STYLE_FILL_AREA(#309302); +#309302 = FILL_AREA_STYLE('',(#309303)); +#309303 = FILL_AREA_STYLE_COLOUR('',#295697); +#309304 = STYLED_ITEM('color',(#309305),#10368); +#309305 = PRESENTATION_STYLE_ASSIGNMENT((#309306)); +#309306 = SURFACE_STYLE_USAGE(.BOTH.,#309307); +#309307 = SURFACE_SIDE_STYLE('',(#309308)); +#309308 = SURFACE_STYLE_FILL_AREA(#309309); +#309309 = FILL_AREA_STYLE('',(#309310)); +#309310 = FILL_AREA_STYLE_COLOUR('',#295697); +#309311 = STYLED_ITEM('color',(#309312),#10385); +#309312 = PRESENTATION_STYLE_ASSIGNMENT((#309313)); +#309313 = SURFACE_STYLE_USAGE(.BOTH.,#309314); +#309314 = SURFACE_SIDE_STYLE('',(#309315)); +#309315 = SURFACE_STYLE_FILL_AREA(#309316); +#309316 = FILL_AREA_STYLE('',(#309317)); +#309317 = FILL_AREA_STYLE_COLOUR('',#295697); +#309318 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #309319,#309326,#309333,#309340,#309347,#309354,#309361,#309368, + #309375,#309382,#309389,#309396,#309403,#309410,#309417,#309424, + #309431,#309438,#309445,#309452,#309459,#309466,#309473,#309480, + #309487,#309494,#309501,#309508,#309515,#309522,#309529,#309536, + #309543,#309550,#309557,#309564,#309571,#309578,#309585,#309592, + #309599,#309606,#309613,#309620,#309627,#309634,#309641,#309648, + #309655,#309662),#11967); +#309319 = STYLED_ITEM('color',(#309320),#10446); +#309320 = PRESENTATION_STYLE_ASSIGNMENT((#309321)); +#309321 = SURFACE_STYLE_USAGE(.BOTH.,#309322); +#309322 = SURFACE_SIDE_STYLE('',(#309323)); +#309323 = SURFACE_STYLE_FILL_AREA(#309324); +#309324 = FILL_AREA_STYLE('',(#309325)); +#309325 = FILL_AREA_STYLE_COLOUR('',#282550); +#309326 = STYLED_ITEM('color',(#309327),#10486); +#309327 = PRESENTATION_STYLE_ASSIGNMENT((#309328)); +#309328 = SURFACE_STYLE_USAGE(.BOTH.,#309329); +#309329 = SURFACE_SIDE_STYLE('',(#309330)); +#309330 = SURFACE_STYLE_FILL_AREA(#309331); +#309331 = FILL_AREA_STYLE('',(#309332)); +#309332 = FILL_AREA_STYLE_COLOUR('',#282550); +#309333 = STYLED_ITEM('color',(#309334),#10533); +#309334 = PRESENTATION_STYLE_ASSIGNMENT((#309335)); +#309335 = SURFACE_STYLE_USAGE(.BOTH.,#309336); +#309336 = SURFACE_SIDE_STYLE('',(#309337)); +#309337 = SURFACE_STYLE_FILL_AREA(#309338); +#309338 = FILL_AREA_STYLE('',(#309339)); +#309339 = FILL_AREA_STYLE_COLOUR('',#282550); +#309340 = STYLED_ITEM('color',(#309341),#10612); +#309341 = PRESENTATION_STYLE_ASSIGNMENT((#309342)); +#309342 = SURFACE_STYLE_USAGE(.BOTH.,#309343); +#309343 = SURFACE_SIDE_STYLE('',(#309344)); +#309344 = SURFACE_STYLE_FILL_AREA(#309345); +#309345 = FILL_AREA_STYLE('',(#309346)); +#309346 = FILL_AREA_STYLE_COLOUR('',#282550); +#309347 = STYLED_ITEM('color',(#309348),#10636); +#309348 = PRESENTATION_STYLE_ASSIGNMENT((#309349)); +#309349 = SURFACE_STYLE_USAGE(.BOTH.,#309350); +#309350 = SURFACE_SIDE_STYLE('',(#309351)); +#309351 = SURFACE_STYLE_FILL_AREA(#309352); +#309352 = FILL_AREA_STYLE('',(#309353)); +#309353 = FILL_AREA_STYLE_COLOUR('',#282550); +#309354 = STYLED_ITEM('color',(#309355),#10676); +#309355 = PRESENTATION_STYLE_ASSIGNMENT((#309356)); +#309356 = SURFACE_STYLE_USAGE(.BOTH.,#309357); +#309357 = SURFACE_SIDE_STYLE('',(#309358)); +#309358 = SURFACE_STYLE_FILL_AREA(#309359); +#309359 = FILL_AREA_STYLE('',(#309360)); +#309360 = FILL_AREA_STYLE_COLOUR('',#282550); +#309361 = STYLED_ITEM('color',(#309362),#10707); +#309362 = PRESENTATION_STYLE_ASSIGNMENT((#309363)); +#309363 = SURFACE_STYLE_USAGE(.BOTH.,#309364); +#309364 = SURFACE_SIDE_STYLE('',(#309365)); +#309365 = SURFACE_STYLE_FILL_AREA(#309366); +#309366 = FILL_AREA_STYLE('',(#309367)); +#309367 = FILL_AREA_STYLE_COLOUR('',#282550); +#309368 = STYLED_ITEM('color',(#309369),#10724); +#309369 = PRESENTATION_STYLE_ASSIGNMENT((#309370)); +#309370 = SURFACE_STYLE_USAGE(.BOTH.,#309371); +#309371 = SURFACE_SIDE_STYLE('',(#309372)); +#309372 = SURFACE_STYLE_FILL_AREA(#309373); +#309373 = FILL_AREA_STYLE('',(#309374)); +#309374 = FILL_AREA_STYLE_COLOUR('',#285989); +#309375 = STYLED_ITEM('color',(#309376),#10757); +#309376 = PRESENTATION_STYLE_ASSIGNMENT((#309377)); +#309377 = SURFACE_STYLE_USAGE(.BOTH.,#309378); +#309378 = SURFACE_SIDE_STYLE('',(#309379)); +#309379 = SURFACE_STYLE_FILL_AREA(#309380); +#309380 = FILL_AREA_STYLE('',(#309381)); +#309381 = FILL_AREA_STYLE_COLOUR('',#282550); +#309382 = STYLED_ITEM('color',(#309383),#10781); +#309383 = PRESENTATION_STYLE_ASSIGNMENT((#309384)); +#309384 = SURFACE_STYLE_USAGE(.BOTH.,#309385); +#309385 = SURFACE_SIDE_STYLE('',(#309386)); +#309386 = SURFACE_STYLE_FILL_AREA(#309387); +#309387 = FILL_AREA_STYLE('',(#309388)); +#309388 = FILL_AREA_STYLE_COLOUR('',#285989); +#309389 = STYLED_ITEM('color',(#309390),#10848); +#309390 = PRESENTATION_STYLE_ASSIGNMENT((#309391)); +#309391 = SURFACE_STYLE_USAGE(.BOTH.,#309392); +#309392 = SURFACE_SIDE_STYLE('',(#309393)); +#309393 = SURFACE_STYLE_FILL_AREA(#309394); +#309394 = FILL_AREA_STYLE('',(#309395)); +#309395 = FILL_AREA_STYLE_COLOUR('',#282550); +#309396 = STYLED_ITEM('color',(#309397),#10969); +#309397 = PRESENTATION_STYLE_ASSIGNMENT((#309398)); +#309398 = SURFACE_STYLE_USAGE(.BOTH.,#309399); +#309399 = SURFACE_SIDE_STYLE('',(#309400)); +#309400 = SURFACE_STYLE_FILL_AREA(#309401); +#309401 = FILL_AREA_STYLE('',(#309402)); +#309402 = FILL_AREA_STYLE_COLOUR('',#285989); +#309403 = STYLED_ITEM('color',(#309404),#11036); +#309404 = PRESENTATION_STYLE_ASSIGNMENT((#309405)); +#309405 = SURFACE_STYLE_USAGE(.BOTH.,#309406); +#309406 = SURFACE_SIDE_STYLE('',(#309407)); +#309407 = SURFACE_STYLE_FILL_AREA(#309408); +#309408 = FILL_AREA_STYLE('',(#309409)); +#309409 = FILL_AREA_STYLE_COLOUR('',#282550); +#309410 = STYLED_ITEM('color',(#309411),#11060); +#309411 = PRESENTATION_STYLE_ASSIGNMENT((#309412)); +#309412 = SURFACE_STYLE_USAGE(.BOTH.,#309413); +#309413 = SURFACE_SIDE_STYLE('',(#309414)); +#309414 = SURFACE_STYLE_FILL_AREA(#309415); +#309415 = FILL_AREA_STYLE('',(#309416)); +#309416 = FILL_AREA_STYLE_COLOUR('',#282550); +#309417 = STYLED_ITEM('color',(#309418),#11091); +#309418 = PRESENTATION_STYLE_ASSIGNMENT((#309419)); +#309419 = SURFACE_STYLE_USAGE(.BOTH.,#309420); +#309420 = SURFACE_SIDE_STYLE('',(#309421)); +#309421 = SURFACE_STYLE_FILL_AREA(#309422); +#309422 = FILL_AREA_STYLE('',(#309423)); +#309423 = FILL_AREA_STYLE_COLOUR('',#285989); +#309424 = STYLED_ITEM('color',(#309425),#11124); +#309425 = PRESENTATION_STYLE_ASSIGNMENT((#309426)); +#309426 = SURFACE_STYLE_USAGE(.BOTH.,#309427); +#309427 = SURFACE_SIDE_STYLE('',(#309428)); +#309428 = SURFACE_STYLE_FILL_AREA(#309429); +#309429 = FILL_AREA_STYLE('',(#309430)); +#309430 = FILL_AREA_STYLE_COLOUR('',#282550); +#309431 = STYLED_ITEM('color',(#309432),#11180); +#309432 = PRESENTATION_STYLE_ASSIGNMENT((#309433)); +#309433 = SURFACE_STYLE_USAGE(.BOTH.,#309434); +#309434 = SURFACE_SIDE_STYLE('',(#309435)); +#309435 = SURFACE_STYLE_FILL_AREA(#309436); +#309436 = FILL_AREA_STYLE('',(#309437)); +#309437 = FILL_AREA_STYLE_COLOUR('',#285989); +#309438 = STYLED_ITEM('color',(#309439),#11204); +#309439 = PRESENTATION_STYLE_ASSIGNMENT((#309440)); +#309440 = SURFACE_STYLE_USAGE(.BOTH.,#309441); +#309441 = SURFACE_SIDE_STYLE('',(#309442)); +#309442 = SURFACE_STYLE_FILL_AREA(#309443); +#309443 = FILL_AREA_STYLE('',(#309444)); +#309444 = FILL_AREA_STYLE_COLOUR('',#285989); +#309445 = STYLED_ITEM('color',(#309446),#11228); +#309446 = PRESENTATION_STYLE_ASSIGNMENT((#309447)); +#309447 = SURFACE_STYLE_USAGE(.BOTH.,#309448); +#309448 = SURFACE_SIDE_STYLE('',(#309449)); +#309449 = SURFACE_STYLE_FILL_AREA(#309450); +#309450 = FILL_AREA_STYLE('',(#309451)); +#309451 = FILL_AREA_STYLE_COLOUR('',#285989); +#309452 = STYLED_ITEM('color',(#309453),#11252); +#309453 = PRESENTATION_STYLE_ASSIGNMENT((#309454)); +#309454 = SURFACE_STYLE_USAGE(.BOTH.,#309455); +#309455 = SURFACE_SIDE_STYLE('',(#309456)); +#309456 = SURFACE_STYLE_FILL_AREA(#309457); +#309457 = FILL_AREA_STYLE('',(#309458)); +#309458 = FILL_AREA_STYLE_COLOUR('',#285989); +#309459 = STYLED_ITEM('color',(#309460),#11285); +#309460 = PRESENTATION_STYLE_ASSIGNMENT((#309461)); +#309461 = SURFACE_STYLE_USAGE(.BOTH.,#309462); +#309462 = SURFACE_SIDE_STYLE('',(#309463)); +#309463 = SURFACE_STYLE_FILL_AREA(#309464); +#309464 = FILL_AREA_STYLE('',(#309465)); +#309465 = FILL_AREA_STYLE_COLOUR('',#285989); +#309466 = STYLED_ITEM('color',(#309467),#11297); +#309467 = PRESENTATION_STYLE_ASSIGNMENT((#309468)); +#309468 = SURFACE_STYLE_USAGE(.BOTH.,#309469); +#309469 = SURFACE_SIDE_STYLE('',(#309470)); +#309470 = SURFACE_STYLE_FILL_AREA(#309471); +#309471 = FILL_AREA_STYLE('',(#309472)); +#309472 = FILL_AREA_STYLE_COLOUR('',#285989); +#309473 = STYLED_ITEM('color',(#309474),#11360); +#309474 = PRESENTATION_STYLE_ASSIGNMENT((#309475)); +#309475 = SURFACE_STYLE_USAGE(.BOTH.,#309476); +#309476 = SURFACE_SIDE_STYLE('',(#309477)); +#309477 = SURFACE_STYLE_FILL_AREA(#309478); +#309478 = FILL_AREA_STYLE('',(#309479)); +#309479 = FILL_AREA_STYLE_COLOUR('',#285989); +#309480 = STYLED_ITEM('color',(#309481),#11385); +#309481 = PRESENTATION_STYLE_ASSIGNMENT((#309482)); +#309482 = SURFACE_STYLE_USAGE(.BOTH.,#309483); +#309483 = SURFACE_SIDE_STYLE('',(#309484)); +#309484 = SURFACE_STYLE_FILL_AREA(#309485); +#309485 = FILL_AREA_STYLE('',(#309486)); +#309486 = FILL_AREA_STYLE_COLOUR('',#285989); +#309487 = STYLED_ITEM('color',(#309488),#11402); +#309488 = PRESENTATION_STYLE_ASSIGNMENT((#309489)); +#309489 = SURFACE_STYLE_USAGE(.BOTH.,#309490); +#309490 = SURFACE_SIDE_STYLE('',(#309491)); +#309491 = SURFACE_STYLE_FILL_AREA(#309492); +#309492 = FILL_AREA_STYLE('',(#309493)); +#309493 = FILL_AREA_STYLE_COLOUR('',#285989); +#309494 = STYLED_ITEM('color',(#309495),#11426); +#309495 = PRESENTATION_STYLE_ASSIGNMENT((#309496)); +#309496 = SURFACE_STYLE_USAGE(.BOTH.,#309497); +#309497 = SURFACE_SIDE_STYLE('',(#309498)); +#309498 = SURFACE_STYLE_FILL_AREA(#309499); +#309499 = FILL_AREA_STYLE('',(#309500)); +#309500 = FILL_AREA_STYLE_COLOUR('',#285989); +#309501 = STYLED_ITEM('color',(#309502),#11444); +#309502 = PRESENTATION_STYLE_ASSIGNMENT((#309503)); +#309503 = SURFACE_STYLE_USAGE(.BOTH.,#309504); +#309504 = SURFACE_SIDE_STYLE('',(#309505)); +#309505 = SURFACE_STYLE_FILL_AREA(#309506); +#309506 = FILL_AREA_STYLE('',(#309507)); +#309507 = FILL_AREA_STYLE_COLOUR('',#285989); +#309508 = STYLED_ITEM('color',(#309509),#11462); +#309509 = PRESENTATION_STYLE_ASSIGNMENT((#309510)); +#309510 = SURFACE_STYLE_USAGE(.BOTH.,#309511); +#309511 = SURFACE_SIDE_STYLE('',(#309512)); +#309512 = SURFACE_STYLE_FILL_AREA(#309513); +#309513 = FILL_AREA_STYLE('',(#309514)); +#309514 = FILL_AREA_STYLE_COLOUR('',#285989); +#309515 = STYLED_ITEM('color',(#309516),#11480); +#309516 = PRESENTATION_STYLE_ASSIGNMENT((#309517)); +#309517 = SURFACE_STYLE_USAGE(.BOTH.,#309518); +#309518 = SURFACE_SIDE_STYLE('',(#309519)); +#309519 = SURFACE_STYLE_FILL_AREA(#309520); +#309520 = FILL_AREA_STYLE('',(#309521)); +#309521 = FILL_AREA_STYLE_COLOUR('',#285989); +#309522 = STYLED_ITEM('color',(#309523),#11497); +#309523 = PRESENTATION_STYLE_ASSIGNMENT((#309524)); +#309524 = SURFACE_STYLE_USAGE(.BOTH.,#309525); +#309525 = SURFACE_SIDE_STYLE('',(#309526)); +#309526 = SURFACE_STYLE_FILL_AREA(#309527); +#309527 = FILL_AREA_STYLE('',(#309528)); +#309528 = FILL_AREA_STYLE_COLOUR('',#285989); +#309529 = STYLED_ITEM('color',(#309530),#11514); +#309530 = PRESENTATION_STYLE_ASSIGNMENT((#309531)); +#309531 = SURFACE_STYLE_USAGE(.BOTH.,#309532); +#309532 = SURFACE_SIDE_STYLE('',(#309533)); +#309533 = SURFACE_STYLE_FILL_AREA(#309534); +#309534 = FILL_AREA_STYLE('',(#309535)); +#309535 = FILL_AREA_STYLE_COLOUR('',#285989); +#309536 = STYLED_ITEM('color',(#309537),#11545); +#309537 = PRESENTATION_STYLE_ASSIGNMENT((#309538)); +#309538 = SURFACE_STYLE_USAGE(.BOTH.,#309539); +#309539 = SURFACE_SIDE_STYLE('',(#309540)); +#309540 = SURFACE_STYLE_FILL_AREA(#309541); +#309541 = FILL_AREA_STYLE('',(#309542)); +#309542 = FILL_AREA_STYLE_COLOUR('',#285989); +#309543 = STYLED_ITEM('color',(#309544),#11570); +#309544 = PRESENTATION_STYLE_ASSIGNMENT((#309545)); +#309545 = SURFACE_STYLE_USAGE(.BOTH.,#309546); +#309546 = SURFACE_SIDE_STYLE('',(#309547)); +#309547 = SURFACE_STYLE_FILL_AREA(#309548); +#309548 = FILL_AREA_STYLE('',(#309549)); +#309549 = FILL_AREA_STYLE_COLOUR('',#285989); +#309550 = STYLED_ITEM('color',(#309551),#11595); +#309551 = PRESENTATION_STYLE_ASSIGNMENT((#309552)); +#309552 = SURFACE_STYLE_USAGE(.BOTH.,#309553); +#309553 = SURFACE_SIDE_STYLE('',(#309554)); +#309554 = SURFACE_STYLE_FILL_AREA(#309555); +#309555 = FILL_AREA_STYLE('',(#309556)); +#309556 = FILL_AREA_STYLE_COLOUR('',#285989); +#309557 = STYLED_ITEM('color',(#309558),#11619); +#309558 = PRESENTATION_STYLE_ASSIGNMENT((#309559)); +#309559 = SURFACE_STYLE_USAGE(.BOTH.,#309560); +#309560 = SURFACE_SIDE_STYLE('',(#309561)); +#309561 = SURFACE_STYLE_FILL_AREA(#309562); +#309562 = FILL_AREA_STYLE('',(#309563)); +#309563 = FILL_AREA_STYLE_COLOUR('',#285989); +#309564 = STYLED_ITEM('color',(#309565),#11636); +#309565 = PRESENTATION_STYLE_ASSIGNMENT((#309566)); +#309566 = SURFACE_STYLE_USAGE(.BOTH.,#309567); +#309567 = SURFACE_SIDE_STYLE('',(#309568)); +#309568 = SURFACE_STYLE_FILL_AREA(#309569); +#309569 = FILL_AREA_STYLE('',(#309570)); +#309570 = FILL_AREA_STYLE_COLOUR('',#298132); +#309571 = STYLED_ITEM('color',(#309572),#11667); +#309572 = PRESENTATION_STYLE_ASSIGNMENT((#309573)); +#309573 = SURFACE_STYLE_USAGE(.BOTH.,#309574); +#309574 = SURFACE_SIDE_STYLE('',(#309575)); +#309575 = SURFACE_STYLE_FILL_AREA(#309576); +#309576 = FILL_AREA_STYLE('',(#309577)); +#309577 = FILL_AREA_STYLE_COLOUR('',#298132); +#309578 = STYLED_ITEM('color',(#309579),#11691); +#309579 = PRESENTATION_STYLE_ASSIGNMENT((#309580)); +#309580 = SURFACE_STYLE_USAGE(.BOTH.,#309581); +#309581 = SURFACE_SIDE_STYLE('',(#309582)); +#309582 = SURFACE_STYLE_FILL_AREA(#309583); +#309583 = FILL_AREA_STYLE('',(#309584)); +#309584 = FILL_AREA_STYLE_COLOUR('',#298132); +#309585 = STYLED_ITEM('color',(#309586),#11708); +#309586 = PRESENTATION_STYLE_ASSIGNMENT((#309587)); +#309587 = SURFACE_STYLE_USAGE(.BOTH.,#309588); +#309588 = SURFACE_SIDE_STYLE('',(#309589)); +#309589 = SURFACE_STYLE_FILL_AREA(#309590); +#309590 = FILL_AREA_STYLE('',(#309591)); +#309591 = FILL_AREA_STYLE_COLOUR('',#285989); +#309592 = STYLED_ITEM('color',(#309593),#11736); +#309593 = PRESENTATION_STYLE_ASSIGNMENT((#309594)); +#309594 = SURFACE_STYLE_USAGE(.BOTH.,#309595); +#309595 = SURFACE_SIDE_STYLE('',(#309596)); +#309596 = SURFACE_STYLE_FILL_AREA(#309597); +#309597 = FILL_AREA_STYLE('',(#309598)); +#309598 = FILL_AREA_STYLE_COLOUR('',#285989); +#309599 = STYLED_ITEM('color',(#309600),#11761); +#309600 = PRESENTATION_STYLE_ASSIGNMENT((#309601)); +#309601 = SURFACE_STYLE_USAGE(.BOTH.,#309602); +#309602 = SURFACE_SIDE_STYLE('',(#309603)); +#309603 = SURFACE_STYLE_FILL_AREA(#309604); +#309604 = FILL_AREA_STYLE('',(#309605)); +#309605 = FILL_AREA_STYLE_COLOUR('',#285989); +#309606 = STYLED_ITEM('color',(#309607),#11785); +#309607 = PRESENTATION_STYLE_ASSIGNMENT((#309608)); +#309608 = SURFACE_STYLE_USAGE(.BOTH.,#309609); +#309609 = SURFACE_SIDE_STYLE('',(#309610)); +#309610 = SURFACE_STYLE_FILL_AREA(#309611); +#309611 = FILL_AREA_STYLE('',(#309612)); +#309612 = FILL_AREA_STYLE_COLOUR('',#285989); +#309613 = STYLED_ITEM('color',(#309614),#11810); +#309614 = PRESENTATION_STYLE_ASSIGNMENT((#309615)); +#309615 = SURFACE_STYLE_USAGE(.BOTH.,#309616); +#309616 = SURFACE_SIDE_STYLE('',(#309617)); +#309617 = SURFACE_STYLE_FILL_AREA(#309618); +#309618 = FILL_AREA_STYLE('',(#309619)); +#309619 = FILL_AREA_STYLE_COLOUR('',#285989); +#309620 = STYLED_ITEM('color',(#309621),#11857); +#309621 = PRESENTATION_STYLE_ASSIGNMENT((#309622)); +#309622 = SURFACE_STYLE_USAGE(.BOTH.,#309623); +#309623 = SURFACE_SIDE_STYLE('',(#309624)); +#309624 = SURFACE_STYLE_FILL_AREA(#309625); +#309625 = FILL_AREA_STYLE('',(#309626)); +#309626 = FILL_AREA_STYLE_COLOUR('',#285989); +#309627 = STYLED_ITEM('color',(#309628),#11874); +#309628 = PRESENTATION_STYLE_ASSIGNMENT((#309629)); +#309629 = SURFACE_STYLE_USAGE(.BOTH.,#309630); +#309630 = SURFACE_SIDE_STYLE('',(#309631)); +#309631 = SURFACE_STYLE_FILL_AREA(#309632); +#309632 = FILL_AREA_STYLE('',(#309633)); +#309633 = FILL_AREA_STYLE_COLOUR('',#285989); +#309634 = STYLED_ITEM('color',(#309635),#11886); +#309635 = PRESENTATION_STYLE_ASSIGNMENT((#309636)); +#309636 = SURFACE_STYLE_USAGE(.BOTH.,#309637); +#309637 = SURFACE_SIDE_STYLE('',(#309638)); +#309638 = SURFACE_STYLE_FILL_AREA(#309639); +#309639 = FILL_AREA_STYLE('',(#309640)); +#309640 = FILL_AREA_STYLE_COLOUR('',#285989); +#309641 = STYLED_ITEM('color',(#309642),#11908); +#309642 = PRESENTATION_STYLE_ASSIGNMENT((#309643)); +#309643 = SURFACE_STYLE_USAGE(.BOTH.,#309644); +#309644 = SURFACE_SIDE_STYLE('',(#309645)); +#309645 = SURFACE_STYLE_FILL_AREA(#309646); +#309646 = FILL_AREA_STYLE('',(#309647)); +#309647 = FILL_AREA_STYLE_COLOUR('',#285989); +#309648 = STYLED_ITEM('color',(#309649),#11920); +#309649 = PRESENTATION_STYLE_ASSIGNMENT((#309650)); +#309650 = SURFACE_STYLE_USAGE(.BOTH.,#309651); +#309651 = SURFACE_SIDE_STYLE('',(#309652)); +#309652 = SURFACE_STYLE_FILL_AREA(#309653); +#309653 = FILL_AREA_STYLE('',(#309654)); +#309654 = FILL_AREA_STYLE_COLOUR('',#285989); +#309655 = STYLED_ITEM('color',(#309656),#11938); +#309656 = PRESENTATION_STYLE_ASSIGNMENT((#309657)); +#309657 = SURFACE_STYLE_USAGE(.BOTH.,#309658); +#309658 = SURFACE_SIDE_STYLE('',(#309659)); +#309659 = SURFACE_STYLE_FILL_AREA(#309660); +#309660 = FILL_AREA_STYLE('',(#309661)); +#309661 = FILL_AREA_STYLE_COLOUR('',#285989); +#309662 = STYLED_ITEM('color',(#309663),#11956); +#309663 = PRESENTATION_STYLE_ASSIGNMENT((#309664)); +#309664 = SURFACE_STYLE_USAGE(.BOTH.,#309665); +#309665 = SURFACE_SIDE_STYLE('',(#309666)); +#309666 = SURFACE_STYLE_FILL_AREA(#309667); +#309667 = FILL_AREA_STYLE('',(#309668)); +#309668 = FILL_AREA_STYLE_COLOUR('',#298132); +#309669 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #309670),#263440); +#309670 = STYLED_ITEM('color',(#309671),#261450); +#309671 = PRESENTATION_STYLE_ASSIGNMENT((#309672)); +#309672 = SURFACE_STYLE_USAGE(.BOTH.,#309673); +#309673 = SURFACE_SIDE_STYLE('',(#309674,#309677)); +#309674 = SURFACE_STYLE_FILL_AREA(#309675); +#309675 = FILL_AREA_STYLE('',(#309676)); +#309676 = FILL_AREA_STYLE_COLOUR('',#306457); +#309677 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #306457,(#309678)); +#309678 = SURFACE_STYLE_TRANSPARENT(0.170000016689); +#309679 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #309680,#309689,#309698,#309707,#309716,#309725,#309734,#309743, + #309752,#309761,#309770,#309779,#309788,#309797,#309806,#309815, + #309824,#309833,#309842,#309851,#309860,#309869,#309878,#309887, + #309896,#309905,#309914,#309923,#309932,#309941,#309950,#309959, + #309968,#309977,#309986,#309995,#310004,#310013,#310022,#310031, + #310040,#310049,#310058,#310067,#310076,#310085,#310094,#310103, + #310112,#310121,#310130,#310139,#310148,#310157,#310166,#310175, + #310184,#310193,#310202,#310211,#310220,#310229,#310238,#310247, + #310256,#310265,#310274,#310283,#310292,#310301,#310310,#310319, + #310328,#310337,#310346,#310355,#310364,#310373,#310382,#310391, + #310400,#310409,#310418,#310427,#310436,#310445,#310454,#310463, + #310472,#310481,#310490,#310499,#310508,#310517,#310526,#310535, + #310544,#310553,#310562,#310571,#310580,#310589,#310598,#310607, + #310616,#310625,#310634,#310643,#310652,#310661,#310670,#310679, + #310688,#310697,#310706,#310715,#310724,#310733,#310742,#310751, + #310760,#310769,#310778,#310787,#310796,#310805,#310814,#310823, + #310832,#310841,#310850,#310859,#310868,#310877,#310886,#310895, + #310904,#310913,#310922,#310931,#310940,#310949,#310958,#310967, + #310976,#310985,#310994,#311003,#311012,#311021,#311030,#311039, + #311048,#311057,#311066,#311075,#311084,#311093,#311102,#311111, + #311120,#311129,#311138,#311147,#311156,#311165,#311174,#311183, + #311192,#311201,#311210,#311219,#311228,#311237,#311246,#311255, + #311264,#311273,#311282,#311291,#311300,#311309,#311318,#311327, + #311336,#311345,#311354,#311363,#311372,#311381,#311390,#311399, + #311408,#311417,#311426,#311435,#311444,#311453,#311462,#311471, + #311480,#311489,#311498,#311507,#311516,#311525,#311534,#311543, + #311552,#311561,#311570,#311579,#311588,#311597,#311606,#311615, + #311624,#311633,#311642,#311651,#311660,#311669,#311678,#311687, + #311696,#311705,#311714,#311723,#311732,#311741,#311750,#311759, + #311768,#311777,#311786,#311795,#311804,#311813,#311822,#311831, + #311840,#311849,#311858,#311867,#311876,#311885,#311894,#311903, + #311912,#311921,#311930,#311939,#311948,#311957,#311966,#311975, + #311984,#311993,#312002,#312011,#312020,#312029,#312038,#312047, + #312056,#312065,#312074,#312083,#312092,#312101,#312110,#312119, + #312128,#312137,#312146,#312155,#312164,#312173,#312182,#312191, + #312200,#312209,#312218,#312227,#312236,#312245,#312254,#312263, + #312272,#312281,#312290,#312299,#312308,#312317,#312326,#312335, + #312344,#312353,#312362,#312371,#312380,#312389,#312398,#312407, + #312416,#312425,#312434,#312443,#312452,#312461,#312470,#312479, + #312488,#312497,#312506,#312515,#312524,#312533,#312542,#312551, + #312560,#312569,#312578,#312587,#312596,#312605,#312614,#312623, + #312632,#312641,#312650,#312659,#312668,#312677,#312686,#312695, + #312704,#312713,#312722,#312731,#312740,#312749,#312758,#312767, + #312776,#312785,#312794,#312803,#312812,#312821),#123036); +#309680 = STYLED_ITEM('color',(#309681),#114996); +#309681 = PRESENTATION_STYLE_ASSIGNMENT((#309682,#309687)); +#309682 = SURFACE_STYLE_USAGE(.BOTH.,#309683); +#309683 = SURFACE_SIDE_STYLE('',(#309684)); +#309684 = SURFACE_STYLE_FILL_AREA(#309685); +#309685 = FILL_AREA_STYLE('',(#309686)); +#309686 = FILL_AREA_STYLE_COLOUR('',#270350); +#309687 = CURVE_STYLE('',#309688,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309689 = STYLED_ITEM('color',(#309690),#115036); +#309690 = PRESENTATION_STYLE_ASSIGNMENT((#309691,#309696)); +#309691 = SURFACE_STYLE_USAGE(.BOTH.,#309692); +#309692 = SURFACE_SIDE_STYLE('',(#309693)); +#309693 = SURFACE_STYLE_FILL_AREA(#309694); +#309694 = FILL_AREA_STYLE('',(#309695)); +#309695 = FILL_AREA_STYLE_COLOUR('',#270350); +#309696 = CURVE_STYLE('',#309697,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309698 = STYLED_ITEM('color',(#309699),#115099); +#309699 = PRESENTATION_STYLE_ASSIGNMENT((#309700,#309705)); +#309700 = SURFACE_STYLE_USAGE(.BOTH.,#309701); +#309701 = SURFACE_SIDE_STYLE('',(#309702)); +#309702 = SURFACE_STYLE_FILL_AREA(#309703); +#309703 = FILL_AREA_STYLE('',(#309704)); +#309704 = FILL_AREA_STYLE_COLOUR('',#270350); +#309705 = CURVE_STYLE('',#309706,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309707 = STYLED_ITEM('color',(#309708),#115162); +#309708 = PRESENTATION_STYLE_ASSIGNMENT((#309709,#309714)); +#309709 = SURFACE_STYLE_USAGE(.BOTH.,#309710); +#309710 = SURFACE_SIDE_STYLE('',(#309711)); +#309711 = SURFACE_STYLE_FILL_AREA(#309712); +#309712 = FILL_AREA_STYLE('',(#309713)); +#309713 = FILL_AREA_STYLE_COLOUR('',#270350); +#309714 = CURVE_STYLE('',#309715,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309716 = STYLED_ITEM('color',(#309717),#115179); +#309717 = PRESENTATION_STYLE_ASSIGNMENT((#309718,#309723)); +#309718 = SURFACE_STYLE_USAGE(.BOTH.,#309719); +#309719 = SURFACE_SIDE_STYLE('',(#309720)); +#309720 = SURFACE_STYLE_FILL_AREA(#309721); +#309721 = FILL_AREA_STYLE('',(#309722)); +#309722 = FILL_AREA_STYLE_COLOUR('',#270350); +#309723 = CURVE_STYLE('',#309724,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309725 = STYLED_ITEM('color',(#309726),#115536); +#309726 = PRESENTATION_STYLE_ASSIGNMENT((#309727,#309732)); +#309727 = SURFACE_STYLE_USAGE(.BOTH.,#309728); +#309728 = SURFACE_SIDE_STYLE('',(#309729)); +#309729 = SURFACE_STYLE_FILL_AREA(#309730); +#309730 = FILL_AREA_STYLE('',(#309731)); +#309731 = FILL_AREA_STYLE_COLOUR('',#270350); +#309732 = CURVE_STYLE('',#309733,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309734 = STYLED_ITEM('color',(#309735),#115558); +#309735 = PRESENTATION_STYLE_ASSIGNMENT((#309736,#309741)); +#309736 = SURFACE_STYLE_USAGE(.BOTH.,#309737); +#309737 = SURFACE_SIDE_STYLE('',(#309738)); +#309738 = SURFACE_STYLE_FILL_AREA(#309739); +#309739 = FILL_AREA_STYLE('',(#309740)); +#309740 = FILL_AREA_STYLE_COLOUR('',#270350); +#309741 = CURVE_STYLE('',#309742,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309743 = STYLED_ITEM('color',(#309744),#115575); +#309744 = PRESENTATION_STYLE_ASSIGNMENT((#309745,#309750)); +#309745 = SURFACE_STYLE_USAGE(.BOTH.,#309746); +#309746 = SURFACE_SIDE_STYLE('',(#309747)); +#309747 = SURFACE_STYLE_FILL_AREA(#309748); +#309748 = FILL_AREA_STYLE('',(#309749)); +#309749 = FILL_AREA_STYLE_COLOUR('',#270350); +#309750 = CURVE_STYLE('',#309751,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309752 = OVER_RIDING_STYLED_ITEM('overriding color',(#309753),#115608, + #309743); +#309753 = PRESENTATION_STYLE_ASSIGNMENT((#309754,#309759)); +#309754 = SURFACE_STYLE_USAGE(.BOTH.,#309755); +#309755 = SURFACE_SIDE_STYLE('',(#309756)); +#309756 = SURFACE_STYLE_FILL_AREA(#309757); +#309757 = FILL_AREA_STYLE('',(#309758)); +#309758 = FILL_AREA_STYLE_COLOUR('',#285989); +#309759 = CURVE_STYLE('',#309760,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309761 = OVER_RIDING_STYLED_ITEM('overriding color',(#309762),#115640, + #309743); +#309762 = PRESENTATION_STYLE_ASSIGNMENT((#309763,#309768)); +#309763 = SURFACE_STYLE_USAGE(.BOTH.,#309764); +#309764 = SURFACE_SIDE_STYLE('',(#309765)); +#309765 = SURFACE_STYLE_FILL_AREA(#309766); +#309766 = FILL_AREA_STYLE('',(#309767)); +#309767 = FILL_AREA_STYLE_COLOUR('',#285989); +#309768 = CURVE_STYLE('',#309769,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309770 = OVER_RIDING_STYLED_ITEM('overriding color',(#309771),#115674, + #309743); +#309771 = PRESENTATION_STYLE_ASSIGNMENT((#309772,#309777)); +#309772 = SURFACE_STYLE_USAGE(.BOTH.,#309773); +#309773 = SURFACE_SIDE_STYLE('',(#309774)); +#309774 = SURFACE_STYLE_FILL_AREA(#309775); +#309775 = FILL_AREA_STYLE('',(#309776)); +#309776 = FILL_AREA_STYLE_COLOUR('',#285989); +#309777 = CURVE_STYLE('',#309778,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309779 = OVER_RIDING_STYLED_ITEM('overriding color',(#309780),#115706, + #309743); +#309780 = PRESENTATION_STYLE_ASSIGNMENT((#309781,#309786)); +#309781 = SURFACE_STYLE_USAGE(.BOTH.,#309782); +#309782 = SURFACE_SIDE_STYLE('',(#309783)); +#309783 = SURFACE_STYLE_FILL_AREA(#309784); +#309784 = FILL_AREA_STYLE('',(#309785)); +#309785 = FILL_AREA_STYLE_COLOUR('',#285989); +#309786 = CURVE_STYLE('',#309787,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309788 = OVER_RIDING_STYLED_ITEM('overriding color',(#309789),#115740, + #309743); +#309789 = PRESENTATION_STYLE_ASSIGNMENT((#309790,#309795)); +#309790 = SURFACE_STYLE_USAGE(.BOTH.,#309791); +#309791 = SURFACE_SIDE_STYLE('',(#309792)); +#309792 = SURFACE_STYLE_FILL_AREA(#309793); +#309793 = FILL_AREA_STYLE('',(#309794)); +#309794 = FILL_AREA_STYLE_COLOUR('',#285989); +#309795 = CURVE_STYLE('',#309796,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309797 = OVER_RIDING_STYLED_ITEM('overriding color',(#309798),#115772, + #309743); +#309798 = PRESENTATION_STYLE_ASSIGNMENT((#309799,#309804)); +#309799 = SURFACE_STYLE_USAGE(.BOTH.,#309800); +#309800 = SURFACE_SIDE_STYLE('',(#309801)); +#309801 = SURFACE_STYLE_FILL_AREA(#309802); +#309802 = FILL_AREA_STYLE('',(#309803)); +#309803 = FILL_AREA_STYLE_COLOUR('',#285989); +#309804 = CURVE_STYLE('',#309805,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309806 = OVER_RIDING_STYLED_ITEM('overriding color',(#309807),#115806, + #309743); +#309807 = PRESENTATION_STYLE_ASSIGNMENT((#309808,#309813)); +#309808 = SURFACE_STYLE_USAGE(.BOTH.,#309809); +#309809 = SURFACE_SIDE_STYLE('',(#309810)); +#309810 = SURFACE_STYLE_FILL_AREA(#309811); +#309811 = FILL_AREA_STYLE('',(#309812)); +#309812 = FILL_AREA_STYLE_COLOUR('',#285989); +#309813 = CURVE_STYLE('',#309814,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309815 = OVER_RIDING_STYLED_ITEM('overriding color',(#309816),#115838, + #309743); +#309816 = PRESENTATION_STYLE_ASSIGNMENT((#309817,#309822)); +#309817 = SURFACE_STYLE_USAGE(.BOTH.,#309818); +#309818 = SURFACE_SIDE_STYLE('',(#309819)); +#309819 = SURFACE_STYLE_FILL_AREA(#309820); +#309820 = FILL_AREA_STYLE('',(#309821)); +#309821 = FILL_AREA_STYLE_COLOUR('',#285989); +#309822 = CURVE_STYLE('',#309823,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309824 = OVER_RIDING_STYLED_ITEM('overriding color',(#309825),#115872, + #309743); +#309825 = PRESENTATION_STYLE_ASSIGNMENT((#309826,#309831)); +#309826 = SURFACE_STYLE_USAGE(.BOTH.,#309827); +#309827 = SURFACE_SIDE_STYLE('',(#309828)); +#309828 = SURFACE_STYLE_FILL_AREA(#309829); +#309829 = FILL_AREA_STYLE('',(#309830)); +#309830 = FILL_AREA_STYLE_COLOUR('',#285989); +#309831 = CURVE_STYLE('',#309832,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309833 = OVER_RIDING_STYLED_ITEM('overriding color',(#309834),#115904, + #309743); +#309834 = PRESENTATION_STYLE_ASSIGNMENT((#309835,#309840)); +#309835 = SURFACE_STYLE_USAGE(.BOTH.,#309836); +#309836 = SURFACE_SIDE_STYLE('',(#309837)); +#309837 = SURFACE_STYLE_FILL_AREA(#309838); +#309838 = FILL_AREA_STYLE('',(#309839)); +#309839 = FILL_AREA_STYLE_COLOUR('',#285989); +#309840 = CURVE_STYLE('',#309841,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309842 = OVER_RIDING_STYLED_ITEM('overriding color',(#309843),#115938, + #309743); +#309843 = PRESENTATION_STYLE_ASSIGNMENT((#309844,#309849)); +#309844 = SURFACE_STYLE_USAGE(.BOTH.,#309845); +#309845 = SURFACE_SIDE_STYLE('',(#309846)); +#309846 = SURFACE_STYLE_FILL_AREA(#309847); +#309847 = FILL_AREA_STYLE('',(#309848)); +#309848 = FILL_AREA_STYLE_COLOUR('',#285989); +#309849 = CURVE_STYLE('',#309850,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309851 = OVER_RIDING_STYLED_ITEM('overriding color',(#309852),#115970, + #309743); +#309852 = PRESENTATION_STYLE_ASSIGNMENT((#309853,#309858)); +#309853 = SURFACE_STYLE_USAGE(.BOTH.,#309854); +#309854 = SURFACE_SIDE_STYLE('',(#309855)); +#309855 = SURFACE_STYLE_FILL_AREA(#309856); +#309856 = FILL_AREA_STYLE('',(#309857)); +#309857 = FILL_AREA_STYLE_COLOUR('',#285989); +#309858 = CURVE_STYLE('',#309859,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309860 = OVER_RIDING_STYLED_ITEM('overriding color',(#309861),#116004, + #309743); +#309861 = PRESENTATION_STYLE_ASSIGNMENT((#309862,#309867)); +#309862 = SURFACE_STYLE_USAGE(.BOTH.,#309863); +#309863 = SURFACE_SIDE_STYLE('',(#309864)); +#309864 = SURFACE_STYLE_FILL_AREA(#309865); +#309865 = FILL_AREA_STYLE('',(#309866)); +#309866 = FILL_AREA_STYLE_COLOUR('',#285989); +#309867 = CURVE_STYLE('',#309868,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309869 = OVER_RIDING_STYLED_ITEM('overriding color',(#309870),#116036, + #309743); +#309870 = PRESENTATION_STYLE_ASSIGNMENT((#309871,#309876)); +#309871 = SURFACE_STYLE_USAGE(.BOTH.,#309872); +#309872 = SURFACE_SIDE_STYLE('',(#309873)); +#309873 = SURFACE_STYLE_FILL_AREA(#309874); +#309874 = FILL_AREA_STYLE('',(#309875)); +#309875 = FILL_AREA_STYLE_COLOUR('',#285989); +#309876 = CURVE_STYLE('',#309877,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309878 = OVER_RIDING_STYLED_ITEM('overriding color',(#309879),#116070, + #309743); +#309879 = PRESENTATION_STYLE_ASSIGNMENT((#309880,#309885)); +#309880 = SURFACE_STYLE_USAGE(.BOTH.,#309881); +#309881 = SURFACE_SIDE_STYLE('',(#309882)); +#309882 = SURFACE_STYLE_FILL_AREA(#309883); +#309883 = FILL_AREA_STYLE('',(#309884)); +#309884 = FILL_AREA_STYLE_COLOUR('',#285989); +#309885 = CURVE_STYLE('',#309886,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309887 = OVER_RIDING_STYLED_ITEM('overriding color',(#309888),#116102, + #309743); +#309888 = PRESENTATION_STYLE_ASSIGNMENT((#309889,#309894)); +#309889 = SURFACE_STYLE_USAGE(.BOTH.,#309890); +#309890 = SURFACE_SIDE_STYLE('',(#309891)); +#309891 = SURFACE_STYLE_FILL_AREA(#309892); +#309892 = FILL_AREA_STYLE('',(#309893)); +#309893 = FILL_AREA_STYLE_COLOUR('',#285989); +#309894 = CURVE_STYLE('',#309895,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309896 = OVER_RIDING_STYLED_ITEM('overriding color',(#309897),#116136, + #309743); +#309897 = PRESENTATION_STYLE_ASSIGNMENT((#309898,#309903)); +#309898 = SURFACE_STYLE_USAGE(.BOTH.,#309899); +#309899 = SURFACE_SIDE_STYLE('',(#309900)); +#309900 = SURFACE_STYLE_FILL_AREA(#309901); +#309901 = FILL_AREA_STYLE('',(#309902)); +#309902 = FILL_AREA_STYLE_COLOUR('',#285989); +#309903 = CURVE_STYLE('',#309904,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309905 = OVER_RIDING_STYLED_ITEM('overriding color',(#309906),#116168, + #309743); +#309906 = PRESENTATION_STYLE_ASSIGNMENT((#309907,#309912)); +#309907 = SURFACE_STYLE_USAGE(.BOTH.,#309908); +#309908 = SURFACE_SIDE_STYLE('',(#309909)); +#309909 = SURFACE_STYLE_FILL_AREA(#309910); +#309910 = FILL_AREA_STYLE('',(#309911)); +#309911 = FILL_AREA_STYLE_COLOUR('',#285989); +#309912 = CURVE_STYLE('',#309913,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309914 = OVER_RIDING_STYLED_ITEM('overriding color',(#309915),#116202, + #309743); +#309915 = PRESENTATION_STYLE_ASSIGNMENT((#309916,#309921)); +#309916 = SURFACE_STYLE_USAGE(.BOTH.,#309917); +#309917 = SURFACE_SIDE_STYLE('',(#309918)); +#309918 = SURFACE_STYLE_FILL_AREA(#309919); +#309919 = FILL_AREA_STYLE('',(#309920)); +#309920 = FILL_AREA_STYLE_COLOUR('',#285989); +#309921 = CURVE_STYLE('',#309922,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309923 = OVER_RIDING_STYLED_ITEM('overriding color',(#309924),#116234, + #309743); +#309924 = PRESENTATION_STYLE_ASSIGNMENT((#309925,#309930)); +#309925 = SURFACE_STYLE_USAGE(.BOTH.,#309926); +#309926 = SURFACE_SIDE_STYLE('',(#309927)); +#309927 = SURFACE_STYLE_FILL_AREA(#309928); +#309928 = FILL_AREA_STYLE('',(#309929)); +#309929 = FILL_AREA_STYLE_COLOUR('',#285989); +#309930 = CURVE_STYLE('',#309931,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#309931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309932 = STYLED_ITEM('color',(#309933),#116252); +#309933 = PRESENTATION_STYLE_ASSIGNMENT((#309934,#309939)); +#309934 = SURFACE_STYLE_USAGE(.BOTH.,#309935); +#309935 = SURFACE_SIDE_STYLE('',(#309936)); +#309936 = SURFACE_STYLE_FILL_AREA(#309937); +#309937 = FILL_AREA_STYLE('',(#309938)); +#309938 = FILL_AREA_STYLE_COLOUR('',#270350); +#309939 = CURVE_STYLE('',#309940,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309941 = STYLED_ITEM('color',(#309942),#116264); +#309942 = PRESENTATION_STYLE_ASSIGNMENT((#309943,#309948)); +#309943 = SURFACE_STYLE_USAGE(.BOTH.,#309944); +#309944 = SURFACE_SIDE_STYLE('',(#309945)); +#309945 = SURFACE_STYLE_FILL_AREA(#309946); +#309946 = FILL_AREA_STYLE('',(#309947)); +#309947 = FILL_AREA_STYLE_COLOUR('',#270350); +#309948 = CURVE_STYLE('',#309949,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309950 = STYLED_ITEM('color',(#309951),#116276); +#309951 = PRESENTATION_STYLE_ASSIGNMENT((#309952,#309957)); +#309952 = SURFACE_STYLE_USAGE(.BOTH.,#309953); +#309953 = SURFACE_SIDE_STYLE('',(#309954)); +#309954 = SURFACE_STYLE_FILL_AREA(#309955); +#309955 = FILL_AREA_STYLE('',(#309956)); +#309956 = FILL_AREA_STYLE_COLOUR('',#270350); +#309957 = CURVE_STYLE('',#309958,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309959 = STYLED_ITEM('color',(#309960),#116307); +#309960 = PRESENTATION_STYLE_ASSIGNMENT((#309961,#309966)); +#309961 = SURFACE_STYLE_USAGE(.BOTH.,#309962); +#309962 = SURFACE_SIDE_STYLE('',(#309963)); +#309963 = SURFACE_STYLE_FILL_AREA(#309964); +#309964 = FILL_AREA_STYLE('',(#309965)); +#309965 = FILL_AREA_STYLE_COLOUR('',#270350); +#309966 = CURVE_STYLE('',#309967,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309968 = STYLED_ITEM('color',(#309969),#116331); +#309969 = PRESENTATION_STYLE_ASSIGNMENT((#309970,#309975)); +#309970 = SURFACE_STYLE_USAGE(.BOTH.,#309971); +#309971 = SURFACE_SIDE_STYLE('',(#309972)); +#309972 = SURFACE_STYLE_FILL_AREA(#309973); +#309973 = FILL_AREA_STYLE('',(#309974)); +#309974 = FILL_AREA_STYLE_COLOUR('',#270350); +#309975 = CURVE_STYLE('',#309976,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309977 = STYLED_ITEM('color',(#309978),#116355); +#309978 = PRESENTATION_STYLE_ASSIGNMENT((#309979,#309984)); +#309979 = SURFACE_STYLE_USAGE(.BOTH.,#309980); +#309980 = SURFACE_SIDE_STYLE('',(#309981)); +#309981 = SURFACE_STYLE_FILL_AREA(#309982); +#309982 = FILL_AREA_STYLE('',(#309983)); +#309983 = FILL_AREA_STYLE_COLOUR('',#270350); +#309984 = CURVE_STYLE('',#309985,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309986 = STYLED_ITEM('color',(#309987),#116372); +#309987 = PRESENTATION_STYLE_ASSIGNMENT((#309988,#309993)); +#309988 = SURFACE_STYLE_USAGE(.BOTH.,#309989); +#309989 = SURFACE_SIDE_STYLE('',(#309990)); +#309990 = SURFACE_STYLE_FILL_AREA(#309991); +#309991 = FILL_AREA_STYLE('',(#309992)); +#309992 = FILL_AREA_STYLE_COLOUR('',#270350); +#309993 = CURVE_STYLE('',#309994,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#309994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#309995 = STYLED_ITEM('color',(#309996),#116403); +#309996 = PRESENTATION_STYLE_ASSIGNMENT((#309997,#310002)); +#309997 = SURFACE_STYLE_USAGE(.BOTH.,#309998); +#309998 = SURFACE_SIDE_STYLE('',(#309999)); +#309999 = SURFACE_STYLE_FILL_AREA(#310000); +#310000 = FILL_AREA_STYLE('',(#310001)); +#310001 = FILL_AREA_STYLE_COLOUR('',#270350); +#310002 = CURVE_STYLE('',#310003,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310004 = STYLED_ITEM('color',(#310005),#116427); +#310005 = PRESENTATION_STYLE_ASSIGNMENT((#310006,#310011)); +#310006 = SURFACE_STYLE_USAGE(.BOTH.,#310007); +#310007 = SURFACE_SIDE_STYLE('',(#310008)); +#310008 = SURFACE_STYLE_FILL_AREA(#310009); +#310009 = FILL_AREA_STYLE('',(#310010)); +#310010 = FILL_AREA_STYLE_COLOUR('',#270350); +#310011 = CURVE_STYLE('',#310012,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310013 = STYLED_ITEM('color',(#310014),#116451); +#310014 = PRESENTATION_STYLE_ASSIGNMENT((#310015,#310020)); +#310015 = SURFACE_STYLE_USAGE(.BOTH.,#310016); +#310016 = SURFACE_SIDE_STYLE('',(#310017)); +#310017 = SURFACE_STYLE_FILL_AREA(#310018); +#310018 = FILL_AREA_STYLE('',(#310019)); +#310019 = FILL_AREA_STYLE_COLOUR('',#270350); +#310020 = CURVE_STYLE('',#310021,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310022 = STYLED_ITEM('color',(#310023),#116468); +#310023 = PRESENTATION_STYLE_ASSIGNMENT((#310024,#310029)); +#310024 = SURFACE_STYLE_USAGE(.BOTH.,#310025); +#310025 = SURFACE_SIDE_STYLE('',(#310026)); +#310026 = SURFACE_STYLE_FILL_AREA(#310027); +#310027 = FILL_AREA_STYLE('',(#310028)); +#310028 = FILL_AREA_STYLE_COLOUR('',#270350); +#310029 = CURVE_STYLE('',#310030,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310031 = STYLED_ITEM('color',(#310032),#116499); +#310032 = PRESENTATION_STYLE_ASSIGNMENT((#310033,#310038)); +#310033 = SURFACE_STYLE_USAGE(.BOTH.,#310034); +#310034 = SURFACE_SIDE_STYLE('',(#310035)); +#310035 = SURFACE_STYLE_FILL_AREA(#310036); +#310036 = FILL_AREA_STYLE('',(#310037)); +#310037 = FILL_AREA_STYLE_COLOUR('',#270350); +#310038 = CURVE_STYLE('',#310039,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310040 = STYLED_ITEM('color',(#310041),#116523); +#310041 = PRESENTATION_STYLE_ASSIGNMENT((#310042,#310047)); +#310042 = SURFACE_STYLE_USAGE(.BOTH.,#310043); +#310043 = SURFACE_SIDE_STYLE('',(#310044)); +#310044 = SURFACE_STYLE_FILL_AREA(#310045); +#310045 = FILL_AREA_STYLE('',(#310046)); +#310046 = FILL_AREA_STYLE_COLOUR('',#270350); +#310047 = CURVE_STYLE('',#310048,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310049 = STYLED_ITEM('color',(#310050),#116547); +#310050 = PRESENTATION_STYLE_ASSIGNMENT((#310051,#310056)); +#310051 = SURFACE_STYLE_USAGE(.BOTH.,#310052); +#310052 = SURFACE_SIDE_STYLE('',(#310053)); +#310053 = SURFACE_STYLE_FILL_AREA(#310054); +#310054 = FILL_AREA_STYLE('',(#310055)); +#310055 = FILL_AREA_STYLE_COLOUR('',#270350); +#310056 = CURVE_STYLE('',#310057,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310058 = STYLED_ITEM('color',(#310059),#116564); +#310059 = PRESENTATION_STYLE_ASSIGNMENT((#310060,#310065)); +#310060 = SURFACE_STYLE_USAGE(.BOTH.,#310061); +#310061 = SURFACE_SIDE_STYLE('',(#310062)); +#310062 = SURFACE_STYLE_FILL_AREA(#310063); +#310063 = FILL_AREA_STYLE('',(#310064)); +#310064 = FILL_AREA_STYLE_COLOUR('',#270350); +#310065 = CURVE_STYLE('',#310066,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310067 = STYLED_ITEM('color',(#310068),#116595); +#310068 = PRESENTATION_STYLE_ASSIGNMENT((#310069,#310074)); +#310069 = SURFACE_STYLE_USAGE(.BOTH.,#310070); +#310070 = SURFACE_SIDE_STYLE('',(#310071)); +#310071 = SURFACE_STYLE_FILL_AREA(#310072); +#310072 = FILL_AREA_STYLE('',(#310073)); +#310073 = FILL_AREA_STYLE_COLOUR('',#270350); +#310074 = CURVE_STYLE('',#310075,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310076 = STYLED_ITEM('color',(#310077),#116619); +#310077 = PRESENTATION_STYLE_ASSIGNMENT((#310078,#310083)); +#310078 = SURFACE_STYLE_USAGE(.BOTH.,#310079); +#310079 = SURFACE_SIDE_STYLE('',(#310080)); +#310080 = SURFACE_STYLE_FILL_AREA(#310081); +#310081 = FILL_AREA_STYLE('',(#310082)); +#310082 = FILL_AREA_STYLE_COLOUR('',#270350); +#310083 = CURVE_STYLE('',#310084,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310085 = STYLED_ITEM('color',(#310086),#116643); +#310086 = PRESENTATION_STYLE_ASSIGNMENT((#310087,#310092)); +#310087 = SURFACE_STYLE_USAGE(.BOTH.,#310088); +#310088 = SURFACE_SIDE_STYLE('',(#310089)); +#310089 = SURFACE_STYLE_FILL_AREA(#310090); +#310090 = FILL_AREA_STYLE('',(#310091)); +#310091 = FILL_AREA_STYLE_COLOUR('',#270350); +#310092 = CURVE_STYLE('',#310093,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310094 = STYLED_ITEM('color',(#310095),#116660); +#310095 = PRESENTATION_STYLE_ASSIGNMENT((#310096,#310101)); +#310096 = SURFACE_STYLE_USAGE(.BOTH.,#310097); +#310097 = SURFACE_SIDE_STYLE('',(#310098)); +#310098 = SURFACE_STYLE_FILL_AREA(#310099); +#310099 = FILL_AREA_STYLE('',(#310100)); +#310100 = FILL_AREA_STYLE_COLOUR('',#270350); +#310101 = CURVE_STYLE('',#310102,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310103 = STYLED_ITEM('color',(#310104),#116691); +#310104 = PRESENTATION_STYLE_ASSIGNMENT((#310105,#310110)); +#310105 = SURFACE_STYLE_USAGE(.BOTH.,#310106); +#310106 = SURFACE_SIDE_STYLE('',(#310107)); +#310107 = SURFACE_STYLE_FILL_AREA(#310108); +#310108 = FILL_AREA_STYLE('',(#310109)); +#310109 = FILL_AREA_STYLE_COLOUR('',#270350); +#310110 = CURVE_STYLE('',#310111,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310112 = STYLED_ITEM('color',(#310113),#116715); +#310113 = PRESENTATION_STYLE_ASSIGNMENT((#310114,#310119)); +#310114 = SURFACE_STYLE_USAGE(.BOTH.,#310115); +#310115 = SURFACE_SIDE_STYLE('',(#310116)); +#310116 = SURFACE_STYLE_FILL_AREA(#310117); +#310117 = FILL_AREA_STYLE('',(#310118)); +#310118 = FILL_AREA_STYLE_COLOUR('',#270350); +#310119 = CURVE_STYLE('',#310120,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310121 = STYLED_ITEM('color',(#310122),#116739); +#310122 = PRESENTATION_STYLE_ASSIGNMENT((#310123,#310128)); +#310123 = SURFACE_STYLE_USAGE(.BOTH.,#310124); +#310124 = SURFACE_SIDE_STYLE('',(#310125)); +#310125 = SURFACE_STYLE_FILL_AREA(#310126); +#310126 = FILL_AREA_STYLE('',(#310127)); +#310127 = FILL_AREA_STYLE_COLOUR('',#270350); +#310128 = CURVE_STYLE('',#310129,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310130 = STYLED_ITEM('color',(#310131),#116756); +#310131 = PRESENTATION_STYLE_ASSIGNMENT((#310132,#310137)); +#310132 = SURFACE_STYLE_USAGE(.BOTH.,#310133); +#310133 = SURFACE_SIDE_STYLE('',(#310134)); +#310134 = SURFACE_STYLE_FILL_AREA(#310135); +#310135 = FILL_AREA_STYLE('',(#310136)); +#310136 = FILL_AREA_STYLE_COLOUR('',#270350); +#310137 = CURVE_STYLE('',#310138,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310139 = STYLED_ITEM('color',(#310140),#116787); +#310140 = PRESENTATION_STYLE_ASSIGNMENT((#310141,#310146)); +#310141 = SURFACE_STYLE_USAGE(.BOTH.,#310142); +#310142 = SURFACE_SIDE_STYLE('',(#310143)); +#310143 = SURFACE_STYLE_FILL_AREA(#310144); +#310144 = FILL_AREA_STYLE('',(#310145)); +#310145 = FILL_AREA_STYLE_COLOUR('',#270350); +#310146 = CURVE_STYLE('',#310147,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310148 = STYLED_ITEM('color',(#310149),#116811); +#310149 = PRESENTATION_STYLE_ASSIGNMENT((#310150,#310155)); +#310150 = SURFACE_STYLE_USAGE(.BOTH.,#310151); +#310151 = SURFACE_SIDE_STYLE('',(#310152)); +#310152 = SURFACE_STYLE_FILL_AREA(#310153); +#310153 = FILL_AREA_STYLE('',(#310154)); +#310154 = FILL_AREA_STYLE_COLOUR('',#270350); +#310155 = CURVE_STYLE('',#310156,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310157 = STYLED_ITEM('color',(#310158),#116835); +#310158 = PRESENTATION_STYLE_ASSIGNMENT((#310159,#310164)); +#310159 = SURFACE_STYLE_USAGE(.BOTH.,#310160); +#310160 = SURFACE_SIDE_STYLE('',(#310161)); +#310161 = SURFACE_STYLE_FILL_AREA(#310162); +#310162 = FILL_AREA_STYLE('',(#310163)); +#310163 = FILL_AREA_STYLE_COLOUR('',#270350); +#310164 = CURVE_STYLE('',#310165,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310166 = STYLED_ITEM('color',(#310167),#116852); +#310167 = PRESENTATION_STYLE_ASSIGNMENT((#310168,#310173)); +#310168 = SURFACE_STYLE_USAGE(.BOTH.,#310169); +#310169 = SURFACE_SIDE_STYLE('',(#310170)); +#310170 = SURFACE_STYLE_FILL_AREA(#310171); +#310171 = FILL_AREA_STYLE('',(#310172)); +#310172 = FILL_AREA_STYLE_COLOUR('',#270350); +#310173 = CURVE_STYLE('',#310174,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310175 = STYLED_ITEM('color',(#310176),#116883); +#310176 = PRESENTATION_STYLE_ASSIGNMENT((#310177,#310182)); +#310177 = SURFACE_STYLE_USAGE(.BOTH.,#310178); +#310178 = SURFACE_SIDE_STYLE('',(#310179)); +#310179 = SURFACE_STYLE_FILL_AREA(#310180); +#310180 = FILL_AREA_STYLE('',(#310181)); +#310181 = FILL_AREA_STYLE_COLOUR('',#270350); +#310182 = CURVE_STYLE('',#310183,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310184 = STYLED_ITEM('color',(#310185),#116907); +#310185 = PRESENTATION_STYLE_ASSIGNMENT((#310186,#310191)); +#310186 = SURFACE_STYLE_USAGE(.BOTH.,#310187); +#310187 = SURFACE_SIDE_STYLE('',(#310188)); +#310188 = SURFACE_STYLE_FILL_AREA(#310189); +#310189 = FILL_AREA_STYLE('',(#310190)); +#310190 = FILL_AREA_STYLE_COLOUR('',#270350); +#310191 = CURVE_STYLE('',#310192,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310193 = STYLED_ITEM('color',(#310194),#116931); +#310194 = PRESENTATION_STYLE_ASSIGNMENT((#310195,#310200)); +#310195 = SURFACE_STYLE_USAGE(.BOTH.,#310196); +#310196 = SURFACE_SIDE_STYLE('',(#310197)); +#310197 = SURFACE_STYLE_FILL_AREA(#310198); +#310198 = FILL_AREA_STYLE('',(#310199)); +#310199 = FILL_AREA_STYLE_COLOUR('',#270350); +#310200 = CURVE_STYLE('',#310201,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310202 = STYLED_ITEM('color',(#310203),#116948); +#310203 = PRESENTATION_STYLE_ASSIGNMENT((#310204,#310209)); +#310204 = SURFACE_STYLE_USAGE(.BOTH.,#310205); +#310205 = SURFACE_SIDE_STYLE('',(#310206)); +#310206 = SURFACE_STYLE_FILL_AREA(#310207); +#310207 = FILL_AREA_STYLE('',(#310208)); +#310208 = FILL_AREA_STYLE_COLOUR('',#270350); +#310209 = CURVE_STYLE('',#310210,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310211 = STYLED_ITEM('color',(#310212),#116979); +#310212 = PRESENTATION_STYLE_ASSIGNMENT((#310213,#310218)); +#310213 = SURFACE_STYLE_USAGE(.BOTH.,#310214); +#310214 = SURFACE_SIDE_STYLE('',(#310215)); +#310215 = SURFACE_STYLE_FILL_AREA(#310216); +#310216 = FILL_AREA_STYLE('',(#310217)); +#310217 = FILL_AREA_STYLE_COLOUR('',#270350); +#310218 = CURVE_STYLE('',#310219,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310220 = STYLED_ITEM('color',(#310221),#117003); +#310221 = PRESENTATION_STYLE_ASSIGNMENT((#310222,#310227)); +#310222 = SURFACE_STYLE_USAGE(.BOTH.,#310223); +#310223 = SURFACE_SIDE_STYLE('',(#310224)); +#310224 = SURFACE_STYLE_FILL_AREA(#310225); +#310225 = FILL_AREA_STYLE('',(#310226)); +#310226 = FILL_AREA_STYLE_COLOUR('',#270350); +#310227 = CURVE_STYLE('',#310228,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310229 = STYLED_ITEM('color',(#310230),#117027); +#310230 = PRESENTATION_STYLE_ASSIGNMENT((#310231,#310236)); +#310231 = SURFACE_STYLE_USAGE(.BOTH.,#310232); +#310232 = SURFACE_SIDE_STYLE('',(#310233)); +#310233 = SURFACE_STYLE_FILL_AREA(#310234); +#310234 = FILL_AREA_STYLE('',(#310235)); +#310235 = FILL_AREA_STYLE_COLOUR('',#270350); +#310236 = CURVE_STYLE('',#310237,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310238 = STYLED_ITEM('color',(#310239),#117044); +#310239 = PRESENTATION_STYLE_ASSIGNMENT((#310240,#310245)); +#310240 = SURFACE_STYLE_USAGE(.BOTH.,#310241); +#310241 = SURFACE_SIDE_STYLE('',(#310242)); +#310242 = SURFACE_STYLE_FILL_AREA(#310243); +#310243 = FILL_AREA_STYLE('',(#310244)); +#310244 = FILL_AREA_STYLE_COLOUR('',#270350); +#310245 = CURVE_STYLE('',#310246,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310247 = STYLED_ITEM('color',(#310248),#117075); +#310248 = PRESENTATION_STYLE_ASSIGNMENT((#310249,#310254)); +#310249 = SURFACE_STYLE_USAGE(.BOTH.,#310250); +#310250 = SURFACE_SIDE_STYLE('',(#310251)); +#310251 = SURFACE_STYLE_FILL_AREA(#310252); +#310252 = FILL_AREA_STYLE('',(#310253)); +#310253 = FILL_AREA_STYLE_COLOUR('',#270350); +#310254 = CURVE_STYLE('',#310255,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310256 = STYLED_ITEM('color',(#310257),#117099); +#310257 = PRESENTATION_STYLE_ASSIGNMENT((#310258,#310263)); +#310258 = SURFACE_STYLE_USAGE(.BOTH.,#310259); +#310259 = SURFACE_SIDE_STYLE('',(#310260)); +#310260 = SURFACE_STYLE_FILL_AREA(#310261); +#310261 = FILL_AREA_STYLE('',(#310262)); +#310262 = FILL_AREA_STYLE_COLOUR('',#270350); +#310263 = CURVE_STYLE('',#310264,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310265 = STYLED_ITEM('color',(#310266),#117123); +#310266 = PRESENTATION_STYLE_ASSIGNMENT((#310267,#310272)); +#310267 = SURFACE_STYLE_USAGE(.BOTH.,#310268); +#310268 = SURFACE_SIDE_STYLE('',(#310269)); +#310269 = SURFACE_STYLE_FILL_AREA(#310270); +#310270 = FILL_AREA_STYLE('',(#310271)); +#310271 = FILL_AREA_STYLE_COLOUR('',#270350); +#310272 = CURVE_STYLE('',#310273,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310274 = STYLED_ITEM('color',(#310275),#117140); +#310275 = PRESENTATION_STYLE_ASSIGNMENT((#310276,#310281)); +#310276 = SURFACE_STYLE_USAGE(.BOTH.,#310277); +#310277 = SURFACE_SIDE_STYLE('',(#310278)); +#310278 = SURFACE_STYLE_FILL_AREA(#310279); +#310279 = FILL_AREA_STYLE('',(#310280)); +#310280 = FILL_AREA_STYLE_COLOUR('',#270350); +#310281 = CURVE_STYLE('',#310282,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310283 = STYLED_ITEM('color',(#310284),#117171); +#310284 = PRESENTATION_STYLE_ASSIGNMENT((#310285,#310290)); +#310285 = SURFACE_STYLE_USAGE(.BOTH.,#310286); +#310286 = SURFACE_SIDE_STYLE('',(#310287)); +#310287 = SURFACE_STYLE_FILL_AREA(#310288); +#310288 = FILL_AREA_STYLE('',(#310289)); +#310289 = FILL_AREA_STYLE_COLOUR('',#270350); +#310290 = CURVE_STYLE('',#310291,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310292 = STYLED_ITEM('color',(#310293),#117195); +#310293 = PRESENTATION_STYLE_ASSIGNMENT((#310294,#310299)); +#310294 = SURFACE_STYLE_USAGE(.BOTH.,#310295); +#310295 = SURFACE_SIDE_STYLE('',(#310296)); +#310296 = SURFACE_STYLE_FILL_AREA(#310297); +#310297 = FILL_AREA_STYLE('',(#310298)); +#310298 = FILL_AREA_STYLE_COLOUR('',#270350); +#310299 = CURVE_STYLE('',#310300,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310301 = STYLED_ITEM('color',(#310302),#117219); +#310302 = PRESENTATION_STYLE_ASSIGNMENT((#310303,#310308)); +#310303 = SURFACE_STYLE_USAGE(.BOTH.,#310304); +#310304 = SURFACE_SIDE_STYLE('',(#310305)); +#310305 = SURFACE_STYLE_FILL_AREA(#310306); +#310306 = FILL_AREA_STYLE('',(#310307)); +#310307 = FILL_AREA_STYLE_COLOUR('',#270350); +#310308 = CURVE_STYLE('',#310309,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310310 = STYLED_ITEM('color',(#310311),#117236); +#310311 = PRESENTATION_STYLE_ASSIGNMENT((#310312,#310317)); +#310312 = SURFACE_STYLE_USAGE(.BOTH.,#310313); +#310313 = SURFACE_SIDE_STYLE('',(#310314)); +#310314 = SURFACE_STYLE_FILL_AREA(#310315); +#310315 = FILL_AREA_STYLE('',(#310316)); +#310316 = FILL_AREA_STYLE_COLOUR('',#285989); +#310317 = CURVE_STYLE('',#310318,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310319 = STYLED_ITEM('color',(#310320),#117253); +#310320 = PRESENTATION_STYLE_ASSIGNMENT((#310321,#310326)); +#310321 = SURFACE_STYLE_USAGE(.BOTH.,#310322); +#310322 = SURFACE_SIDE_STYLE('',(#310323)); +#310323 = SURFACE_STYLE_FILL_AREA(#310324); +#310324 = FILL_AREA_STYLE('',(#310325)); +#310325 = FILL_AREA_STYLE_COLOUR('',#285989); +#310326 = CURVE_STYLE('',#310327,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310328 = STYLED_ITEM('color',(#310329),#117300); +#310329 = PRESENTATION_STYLE_ASSIGNMENT((#310330,#310335)); +#310330 = SURFACE_STYLE_USAGE(.BOTH.,#310331); +#310331 = SURFACE_SIDE_STYLE('',(#310332)); +#310332 = SURFACE_STYLE_FILL_AREA(#310333); +#310333 = FILL_AREA_STYLE('',(#310334)); +#310334 = FILL_AREA_STYLE_COLOUR('',#285989); +#310335 = CURVE_STYLE('',#310336,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310337 = STYLED_ITEM('color',(#310338),#117317); +#310338 = PRESENTATION_STYLE_ASSIGNMENT((#310339,#310344)); +#310339 = SURFACE_STYLE_USAGE(.BOTH.,#310340); +#310340 = SURFACE_SIDE_STYLE('',(#310341)); +#310341 = SURFACE_STYLE_FILL_AREA(#310342); +#310342 = FILL_AREA_STYLE('',(#310343)); +#310343 = FILL_AREA_STYLE_COLOUR('',#285989); +#310344 = CURVE_STYLE('',#310345,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310346 = STYLED_ITEM('color',(#310347),#117364); +#310347 = PRESENTATION_STYLE_ASSIGNMENT((#310348,#310353)); +#310348 = SURFACE_STYLE_USAGE(.BOTH.,#310349); +#310349 = SURFACE_SIDE_STYLE('',(#310350)); +#310350 = SURFACE_STYLE_FILL_AREA(#310351); +#310351 = FILL_AREA_STYLE('',(#310352)); +#310352 = FILL_AREA_STYLE_COLOUR('',#285989); +#310353 = CURVE_STYLE('',#310354,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310355 = STYLED_ITEM('color',(#310356),#117381); +#310356 = PRESENTATION_STYLE_ASSIGNMENT((#310357,#310362)); +#310357 = SURFACE_STYLE_USAGE(.BOTH.,#310358); +#310358 = SURFACE_SIDE_STYLE('',(#310359)); +#310359 = SURFACE_STYLE_FILL_AREA(#310360); +#310360 = FILL_AREA_STYLE('',(#310361)); +#310361 = FILL_AREA_STYLE_COLOUR('',#285989); +#310362 = CURVE_STYLE('',#310363,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310364 = STYLED_ITEM('color',(#310365),#117428); +#310365 = PRESENTATION_STYLE_ASSIGNMENT((#310366,#310371)); +#310366 = SURFACE_STYLE_USAGE(.BOTH.,#310367); +#310367 = SURFACE_SIDE_STYLE('',(#310368)); +#310368 = SURFACE_STYLE_FILL_AREA(#310369); +#310369 = FILL_AREA_STYLE('',(#310370)); +#310370 = FILL_AREA_STYLE_COLOUR('',#285989); +#310371 = CURVE_STYLE('',#310372,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310373 = STYLED_ITEM('color',(#310374),#117445); +#310374 = PRESENTATION_STYLE_ASSIGNMENT((#310375,#310380)); +#310375 = SURFACE_STYLE_USAGE(.BOTH.,#310376); +#310376 = SURFACE_SIDE_STYLE('',(#310377)); +#310377 = SURFACE_STYLE_FILL_AREA(#310378); +#310378 = FILL_AREA_STYLE('',(#310379)); +#310379 = FILL_AREA_STYLE_COLOUR('',#285989); +#310380 = CURVE_STYLE('',#310381,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310382 = STYLED_ITEM('color',(#310383),#117492); +#310383 = PRESENTATION_STYLE_ASSIGNMENT((#310384,#310389)); +#310384 = SURFACE_STYLE_USAGE(.BOTH.,#310385); +#310385 = SURFACE_SIDE_STYLE('',(#310386)); +#310386 = SURFACE_STYLE_FILL_AREA(#310387); +#310387 = FILL_AREA_STYLE('',(#310388)); +#310388 = FILL_AREA_STYLE_COLOUR('',#285989); +#310389 = CURVE_STYLE('',#310390,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310391 = STYLED_ITEM('color',(#310392),#117509); +#310392 = PRESENTATION_STYLE_ASSIGNMENT((#310393,#310398)); +#310393 = SURFACE_STYLE_USAGE(.BOTH.,#310394); +#310394 = SURFACE_SIDE_STYLE('',(#310395)); +#310395 = SURFACE_STYLE_FILL_AREA(#310396); +#310396 = FILL_AREA_STYLE('',(#310397)); +#310397 = FILL_AREA_STYLE_COLOUR('',#285989); +#310398 = CURVE_STYLE('',#310399,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310400 = STYLED_ITEM('color',(#310401),#117556); +#310401 = PRESENTATION_STYLE_ASSIGNMENT((#310402,#310407)); +#310402 = SURFACE_STYLE_USAGE(.BOTH.,#310403); +#310403 = SURFACE_SIDE_STYLE('',(#310404)); +#310404 = SURFACE_STYLE_FILL_AREA(#310405); +#310405 = FILL_AREA_STYLE('',(#310406)); +#310406 = FILL_AREA_STYLE_COLOUR('',#285989); +#310407 = CURVE_STYLE('',#310408,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310409 = STYLED_ITEM('color',(#310410),#117573); +#310410 = PRESENTATION_STYLE_ASSIGNMENT((#310411,#310416)); +#310411 = SURFACE_STYLE_USAGE(.BOTH.,#310412); +#310412 = SURFACE_SIDE_STYLE('',(#310413)); +#310413 = SURFACE_STYLE_FILL_AREA(#310414); +#310414 = FILL_AREA_STYLE('',(#310415)); +#310415 = FILL_AREA_STYLE_COLOUR('',#285989); +#310416 = CURVE_STYLE('',#310417,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310418 = STYLED_ITEM('color',(#310419),#117620); +#310419 = PRESENTATION_STYLE_ASSIGNMENT((#310420,#310425)); +#310420 = SURFACE_STYLE_USAGE(.BOTH.,#310421); +#310421 = SURFACE_SIDE_STYLE('',(#310422)); +#310422 = SURFACE_STYLE_FILL_AREA(#310423); +#310423 = FILL_AREA_STYLE('',(#310424)); +#310424 = FILL_AREA_STYLE_COLOUR('',#285989); +#310425 = CURVE_STYLE('',#310426,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310427 = STYLED_ITEM('color',(#310428),#117637); +#310428 = PRESENTATION_STYLE_ASSIGNMENT((#310429,#310434)); +#310429 = SURFACE_STYLE_USAGE(.BOTH.,#310430); +#310430 = SURFACE_SIDE_STYLE('',(#310431)); +#310431 = SURFACE_STYLE_FILL_AREA(#310432); +#310432 = FILL_AREA_STYLE('',(#310433)); +#310433 = FILL_AREA_STYLE_COLOUR('',#285989); +#310434 = CURVE_STYLE('',#310435,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310436 = STYLED_ITEM('color',(#310437),#117684); +#310437 = PRESENTATION_STYLE_ASSIGNMENT((#310438,#310443)); +#310438 = SURFACE_STYLE_USAGE(.BOTH.,#310439); +#310439 = SURFACE_SIDE_STYLE('',(#310440)); +#310440 = SURFACE_STYLE_FILL_AREA(#310441); +#310441 = FILL_AREA_STYLE('',(#310442)); +#310442 = FILL_AREA_STYLE_COLOUR('',#285989); +#310443 = CURVE_STYLE('',#310444,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310445 = STYLED_ITEM('color',(#310446),#117701); +#310446 = PRESENTATION_STYLE_ASSIGNMENT((#310447,#310452)); +#310447 = SURFACE_STYLE_USAGE(.BOTH.,#310448); +#310448 = SURFACE_SIDE_STYLE('',(#310449)); +#310449 = SURFACE_STYLE_FILL_AREA(#310450); +#310450 = FILL_AREA_STYLE('',(#310451)); +#310451 = FILL_AREA_STYLE_COLOUR('',#285989); +#310452 = CURVE_STYLE('',#310453,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310454 = STYLED_ITEM('color',(#310455),#117748); +#310455 = PRESENTATION_STYLE_ASSIGNMENT((#310456,#310461)); +#310456 = SURFACE_STYLE_USAGE(.BOTH.,#310457); +#310457 = SURFACE_SIDE_STYLE('',(#310458)); +#310458 = SURFACE_STYLE_FILL_AREA(#310459); +#310459 = FILL_AREA_STYLE('',(#310460)); +#310460 = FILL_AREA_STYLE_COLOUR('',#285989); +#310461 = CURVE_STYLE('',#310462,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310463 = STYLED_ITEM('color',(#310464),#117765); +#310464 = PRESENTATION_STYLE_ASSIGNMENT((#310465,#310470)); +#310465 = SURFACE_STYLE_USAGE(.BOTH.,#310466); +#310466 = SURFACE_SIDE_STYLE('',(#310467)); +#310467 = SURFACE_STYLE_FILL_AREA(#310468); +#310468 = FILL_AREA_STYLE('',(#310469)); +#310469 = FILL_AREA_STYLE_COLOUR('',#285989); +#310470 = CURVE_STYLE('',#310471,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310472 = STYLED_ITEM('color',(#310473),#117812); +#310473 = PRESENTATION_STYLE_ASSIGNMENT((#310474,#310479)); +#310474 = SURFACE_STYLE_USAGE(.BOTH.,#310475); +#310475 = SURFACE_SIDE_STYLE('',(#310476)); +#310476 = SURFACE_STYLE_FILL_AREA(#310477); +#310477 = FILL_AREA_STYLE('',(#310478)); +#310478 = FILL_AREA_STYLE_COLOUR('',#285989); +#310479 = CURVE_STYLE('',#310480,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310481 = STYLED_ITEM('color',(#310482),#117829); +#310482 = PRESENTATION_STYLE_ASSIGNMENT((#310483,#310488)); +#310483 = SURFACE_STYLE_USAGE(.BOTH.,#310484); +#310484 = SURFACE_SIDE_STYLE('',(#310485)); +#310485 = SURFACE_STYLE_FILL_AREA(#310486); +#310486 = FILL_AREA_STYLE('',(#310487)); +#310487 = FILL_AREA_STYLE_COLOUR('',#285989); +#310488 = CURVE_STYLE('',#310489,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310490 = STYLED_ITEM('color',(#310491),#117876); +#310491 = PRESENTATION_STYLE_ASSIGNMENT((#310492,#310497)); +#310492 = SURFACE_STYLE_USAGE(.BOTH.,#310493); +#310493 = SURFACE_SIDE_STYLE('',(#310494)); +#310494 = SURFACE_STYLE_FILL_AREA(#310495); +#310495 = FILL_AREA_STYLE('',(#310496)); +#310496 = FILL_AREA_STYLE_COLOUR('',#285989); +#310497 = CURVE_STYLE('',#310498,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310499 = STYLED_ITEM('color',(#310500),#117893); +#310500 = PRESENTATION_STYLE_ASSIGNMENT((#310501,#310506)); +#310501 = SURFACE_STYLE_USAGE(.BOTH.,#310502); +#310502 = SURFACE_SIDE_STYLE('',(#310503)); +#310503 = SURFACE_STYLE_FILL_AREA(#310504); +#310504 = FILL_AREA_STYLE('',(#310505)); +#310505 = FILL_AREA_STYLE_COLOUR('',#285989); +#310506 = CURVE_STYLE('',#310507,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310508 = STYLED_ITEM('color',(#310509),#117940); +#310509 = PRESENTATION_STYLE_ASSIGNMENT((#310510,#310515)); +#310510 = SURFACE_STYLE_USAGE(.BOTH.,#310511); +#310511 = SURFACE_SIDE_STYLE('',(#310512)); +#310512 = SURFACE_STYLE_FILL_AREA(#310513); +#310513 = FILL_AREA_STYLE('',(#310514)); +#310514 = FILL_AREA_STYLE_COLOUR('',#285989); +#310515 = CURVE_STYLE('',#310516,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310517 = STYLED_ITEM('color',(#310518),#117957); +#310518 = PRESENTATION_STYLE_ASSIGNMENT((#310519,#310524)); +#310519 = SURFACE_STYLE_USAGE(.BOTH.,#310520); +#310520 = SURFACE_SIDE_STYLE('',(#310521)); +#310521 = SURFACE_STYLE_FILL_AREA(#310522); +#310522 = FILL_AREA_STYLE('',(#310523)); +#310523 = FILL_AREA_STYLE_COLOUR('',#285989); +#310524 = CURVE_STYLE('',#310525,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310526 = STYLED_ITEM('color',(#310527),#118004); +#310527 = PRESENTATION_STYLE_ASSIGNMENT((#310528,#310533)); +#310528 = SURFACE_STYLE_USAGE(.BOTH.,#310529); +#310529 = SURFACE_SIDE_STYLE('',(#310530)); +#310530 = SURFACE_STYLE_FILL_AREA(#310531); +#310531 = FILL_AREA_STYLE('',(#310532)); +#310532 = FILL_AREA_STYLE_COLOUR('',#285989); +#310533 = CURVE_STYLE('',#310534,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310535 = STYLED_ITEM('color',(#310536),#118021); +#310536 = PRESENTATION_STYLE_ASSIGNMENT((#310537,#310542)); +#310537 = SURFACE_STYLE_USAGE(.BOTH.,#310538); +#310538 = SURFACE_SIDE_STYLE('',(#310539)); +#310539 = SURFACE_STYLE_FILL_AREA(#310540); +#310540 = FILL_AREA_STYLE('',(#310541)); +#310541 = FILL_AREA_STYLE_COLOUR('',#285989); +#310542 = CURVE_STYLE('',#310543,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310544 = STYLED_ITEM('color',(#310545),#118068); +#310545 = PRESENTATION_STYLE_ASSIGNMENT((#310546,#310551)); +#310546 = SURFACE_STYLE_USAGE(.BOTH.,#310547); +#310547 = SURFACE_SIDE_STYLE('',(#310548)); +#310548 = SURFACE_STYLE_FILL_AREA(#310549); +#310549 = FILL_AREA_STYLE('',(#310550)); +#310550 = FILL_AREA_STYLE_COLOUR('',#285989); +#310551 = CURVE_STYLE('',#310552,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310553 = STYLED_ITEM('color',(#310554),#118085); +#310554 = PRESENTATION_STYLE_ASSIGNMENT((#310555,#310560)); +#310555 = SURFACE_STYLE_USAGE(.BOTH.,#310556); +#310556 = SURFACE_SIDE_STYLE('',(#310557)); +#310557 = SURFACE_STYLE_FILL_AREA(#310558); +#310558 = FILL_AREA_STYLE('',(#310559)); +#310559 = FILL_AREA_STYLE_COLOUR('',#285989); +#310560 = CURVE_STYLE('',#310561,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310562 = STYLED_ITEM('color',(#310563),#118132); +#310563 = PRESENTATION_STYLE_ASSIGNMENT((#310564,#310569)); +#310564 = SURFACE_STYLE_USAGE(.BOTH.,#310565); +#310565 = SURFACE_SIDE_STYLE('',(#310566)); +#310566 = SURFACE_STYLE_FILL_AREA(#310567); +#310567 = FILL_AREA_STYLE('',(#310568)); +#310568 = FILL_AREA_STYLE_COLOUR('',#285989); +#310569 = CURVE_STYLE('',#310570,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310571 = STYLED_ITEM('color',(#310572),#118149); +#310572 = PRESENTATION_STYLE_ASSIGNMENT((#310573,#310578)); +#310573 = SURFACE_STYLE_USAGE(.BOTH.,#310574); +#310574 = SURFACE_SIDE_STYLE('',(#310575)); +#310575 = SURFACE_STYLE_FILL_AREA(#310576); +#310576 = FILL_AREA_STYLE('',(#310577)); +#310577 = FILL_AREA_STYLE_COLOUR('',#285989); +#310578 = CURVE_STYLE('',#310579,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310580 = STYLED_ITEM('color',(#310581),#118196); +#310581 = PRESENTATION_STYLE_ASSIGNMENT((#310582,#310587)); +#310582 = SURFACE_STYLE_USAGE(.BOTH.,#310583); +#310583 = SURFACE_SIDE_STYLE('',(#310584)); +#310584 = SURFACE_STYLE_FILL_AREA(#310585); +#310585 = FILL_AREA_STYLE('',(#310586)); +#310586 = FILL_AREA_STYLE_COLOUR('',#285989); +#310587 = CURVE_STYLE('',#310588,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310589 = STYLED_ITEM('color',(#310590),#118213); +#310590 = PRESENTATION_STYLE_ASSIGNMENT((#310591,#310596)); +#310591 = SURFACE_STYLE_USAGE(.BOTH.,#310592); +#310592 = SURFACE_SIDE_STYLE('',(#310593)); +#310593 = SURFACE_STYLE_FILL_AREA(#310594); +#310594 = FILL_AREA_STYLE('',(#310595)); +#310595 = FILL_AREA_STYLE_COLOUR('',#285989); +#310596 = CURVE_STYLE('',#310597,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310598 = STYLED_ITEM('color',(#310599),#118260); +#310599 = PRESENTATION_STYLE_ASSIGNMENT((#310600,#310605)); +#310600 = SURFACE_STYLE_USAGE(.BOTH.,#310601); +#310601 = SURFACE_SIDE_STYLE('',(#310602)); +#310602 = SURFACE_STYLE_FILL_AREA(#310603); +#310603 = FILL_AREA_STYLE('',(#310604)); +#310604 = FILL_AREA_STYLE_COLOUR('',#285989); +#310605 = CURVE_STYLE('',#310606,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310607 = STYLED_ITEM('color',(#310608),#118277); +#310608 = PRESENTATION_STYLE_ASSIGNMENT((#310609,#310614)); +#310609 = SURFACE_STYLE_USAGE(.BOTH.,#310610); +#310610 = SURFACE_SIDE_STYLE('',(#310611)); +#310611 = SURFACE_STYLE_FILL_AREA(#310612); +#310612 = FILL_AREA_STYLE('',(#310613)); +#310613 = FILL_AREA_STYLE_COLOUR('',#285989); +#310614 = CURVE_STYLE('',#310615,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310616 = STYLED_ITEM('color',(#310617),#118324); +#310617 = PRESENTATION_STYLE_ASSIGNMENT((#310618,#310623)); +#310618 = SURFACE_STYLE_USAGE(.BOTH.,#310619); +#310619 = SURFACE_SIDE_STYLE('',(#310620)); +#310620 = SURFACE_STYLE_FILL_AREA(#310621); +#310621 = FILL_AREA_STYLE('',(#310622)); +#310622 = FILL_AREA_STYLE_COLOUR('',#285989); +#310623 = CURVE_STYLE('',#310624,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310625 = STYLED_ITEM('color',(#310626),#118341); +#310626 = PRESENTATION_STYLE_ASSIGNMENT((#310627,#310632)); +#310627 = SURFACE_STYLE_USAGE(.BOTH.,#310628); +#310628 = SURFACE_SIDE_STYLE('',(#310629)); +#310629 = SURFACE_STYLE_FILL_AREA(#310630); +#310630 = FILL_AREA_STYLE('',(#310631)); +#310631 = FILL_AREA_STYLE_COLOUR('',#285989); +#310632 = CURVE_STYLE('',#310633,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310634 = STYLED_ITEM('color',(#310635),#118388); +#310635 = PRESENTATION_STYLE_ASSIGNMENT((#310636,#310641)); +#310636 = SURFACE_STYLE_USAGE(.BOTH.,#310637); +#310637 = SURFACE_SIDE_STYLE('',(#310638)); +#310638 = SURFACE_STYLE_FILL_AREA(#310639); +#310639 = FILL_AREA_STYLE('',(#310640)); +#310640 = FILL_AREA_STYLE_COLOUR('',#285989); +#310641 = CURVE_STYLE('',#310642,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310643 = STYLED_ITEM('color',(#310644),#118405); +#310644 = PRESENTATION_STYLE_ASSIGNMENT((#310645,#310650)); +#310645 = SURFACE_STYLE_USAGE(.BOTH.,#310646); +#310646 = SURFACE_SIDE_STYLE('',(#310647)); +#310647 = SURFACE_STYLE_FILL_AREA(#310648); +#310648 = FILL_AREA_STYLE('',(#310649)); +#310649 = FILL_AREA_STYLE_COLOUR('',#285989); +#310650 = CURVE_STYLE('',#310651,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310652 = STYLED_ITEM('color',(#310653),#118452); +#310653 = PRESENTATION_STYLE_ASSIGNMENT((#310654,#310659)); +#310654 = SURFACE_STYLE_USAGE(.BOTH.,#310655); +#310655 = SURFACE_SIDE_STYLE('',(#310656)); +#310656 = SURFACE_STYLE_FILL_AREA(#310657); +#310657 = FILL_AREA_STYLE('',(#310658)); +#310658 = FILL_AREA_STYLE_COLOUR('',#285989); +#310659 = CURVE_STYLE('',#310660,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310661 = STYLED_ITEM('color',(#310662),#118469); +#310662 = PRESENTATION_STYLE_ASSIGNMENT((#310663,#310668)); +#310663 = SURFACE_STYLE_USAGE(.BOTH.,#310664); +#310664 = SURFACE_SIDE_STYLE('',(#310665)); +#310665 = SURFACE_STYLE_FILL_AREA(#310666); +#310666 = FILL_AREA_STYLE('',(#310667)); +#310667 = FILL_AREA_STYLE_COLOUR('',#285989); +#310668 = CURVE_STYLE('',#310669,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310670 = STYLED_ITEM('color',(#310671),#118516); +#310671 = PRESENTATION_STYLE_ASSIGNMENT((#310672,#310677)); +#310672 = SURFACE_STYLE_USAGE(.BOTH.,#310673); +#310673 = SURFACE_SIDE_STYLE('',(#310674)); +#310674 = SURFACE_STYLE_FILL_AREA(#310675); +#310675 = FILL_AREA_STYLE('',(#310676)); +#310676 = FILL_AREA_STYLE_COLOUR('',#270350); +#310677 = CURVE_STYLE('',#310678,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310679 = STYLED_ITEM('color',(#310680),#118547); +#310680 = PRESENTATION_STYLE_ASSIGNMENT((#310681,#310686)); +#310681 = SURFACE_STYLE_USAGE(.BOTH.,#310682); +#310682 = SURFACE_SIDE_STYLE('',(#310683)); +#310683 = SURFACE_STYLE_FILL_AREA(#310684); +#310684 = FILL_AREA_STYLE('',(#310685)); +#310685 = FILL_AREA_STYLE_COLOUR('',#270350); +#310686 = CURVE_STYLE('',#310687,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310688 = OVER_RIDING_STYLED_ITEM('overriding color',(#310689),#118561, + #310679); +#310689 = PRESENTATION_STYLE_ASSIGNMENT((#310690,#310695)); +#310690 = SURFACE_STYLE_USAGE(.BOTH.,#310691); +#310691 = SURFACE_SIDE_STYLE('',(#310692)); +#310692 = SURFACE_STYLE_FILL_AREA(#310693); +#310693 = FILL_AREA_STYLE('',(#310694)); +#310694 = FILL_AREA_STYLE_COLOUR('',#285989); +#310695 = CURVE_STYLE('',#310696,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310697 = OVER_RIDING_STYLED_ITEM('overriding color',(#310698),#118577, + #310679); +#310698 = PRESENTATION_STYLE_ASSIGNMENT((#310699,#310704)); +#310699 = SURFACE_STYLE_USAGE(.BOTH.,#310700); +#310700 = SURFACE_SIDE_STYLE('',(#310701)); +#310701 = SURFACE_STYLE_FILL_AREA(#310702); +#310702 = FILL_AREA_STYLE('',(#310703)); +#310703 = FILL_AREA_STYLE_COLOUR('',#285989); +#310704 = CURVE_STYLE('',#310705,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310706 = STYLED_ITEM('color',(#310707),#118603); +#310707 = PRESENTATION_STYLE_ASSIGNMENT((#310708,#310713)); +#310708 = SURFACE_STYLE_USAGE(.BOTH.,#310709); +#310709 = SURFACE_SIDE_STYLE('',(#310710)); +#310710 = SURFACE_STYLE_FILL_AREA(#310711); +#310711 = FILL_AREA_STYLE('',(#310712)); +#310712 = FILL_AREA_STYLE_COLOUR('',#270350); +#310713 = CURVE_STYLE('',#310714,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310715 = STYLED_ITEM('color',(#310716),#118627); +#310716 = PRESENTATION_STYLE_ASSIGNMENT((#310717,#310722)); +#310717 = SURFACE_STYLE_USAGE(.BOTH.,#310718); +#310718 = SURFACE_SIDE_STYLE('',(#310719)); +#310719 = SURFACE_STYLE_FILL_AREA(#310720); +#310720 = FILL_AREA_STYLE('',(#310721)); +#310721 = FILL_AREA_STYLE_COLOUR('',#270350); +#310722 = CURVE_STYLE('',#310723,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310724 = OVER_RIDING_STYLED_ITEM('overriding color',(#310725),#118641, + #310715); +#310725 = PRESENTATION_STYLE_ASSIGNMENT((#310726,#310731)); +#310726 = SURFACE_STYLE_USAGE(.BOTH.,#310727); +#310727 = SURFACE_SIDE_STYLE('',(#310728)); +#310728 = SURFACE_STYLE_FILL_AREA(#310729); +#310729 = FILL_AREA_STYLE('',(#310730)); +#310730 = FILL_AREA_STYLE_COLOUR('',#285989); +#310731 = CURVE_STYLE('',#310732,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310733 = OVER_RIDING_STYLED_ITEM('overriding color',(#310734),#118657, + #310715); +#310734 = PRESENTATION_STYLE_ASSIGNMENT((#310735,#310740)); +#310735 = SURFACE_STYLE_USAGE(.BOTH.,#310736); +#310736 = SURFACE_SIDE_STYLE('',(#310737)); +#310737 = SURFACE_STYLE_FILL_AREA(#310738); +#310738 = FILL_AREA_STYLE('',(#310739)); +#310739 = FILL_AREA_STYLE_COLOUR('',#285989); +#310740 = CURVE_STYLE('',#310741,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310742 = STYLED_ITEM('color',(#310743),#118676); +#310743 = PRESENTATION_STYLE_ASSIGNMENT((#310744,#310749)); +#310744 = SURFACE_STYLE_USAGE(.BOTH.,#310745); +#310745 = SURFACE_SIDE_STYLE('',(#310746)); +#310746 = SURFACE_STYLE_FILL_AREA(#310747); +#310747 = FILL_AREA_STYLE('',(#310748)); +#310748 = FILL_AREA_STYLE_COLOUR('',#270350); +#310749 = CURVE_STYLE('',#310750,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310751 = STYLED_ITEM('color',(#310752),#118707); +#310752 = PRESENTATION_STYLE_ASSIGNMENT((#310753,#310758)); +#310753 = SURFACE_STYLE_USAGE(.BOTH.,#310754); +#310754 = SURFACE_SIDE_STYLE('',(#310755)); +#310755 = SURFACE_STYLE_FILL_AREA(#310756); +#310756 = FILL_AREA_STYLE('',(#310757)); +#310757 = FILL_AREA_STYLE_COLOUR('',#270350); +#310758 = CURVE_STYLE('',#310759,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310760 = OVER_RIDING_STYLED_ITEM('overriding color',(#310761),#118721, + #310751); +#310761 = PRESENTATION_STYLE_ASSIGNMENT((#310762,#310767)); +#310762 = SURFACE_STYLE_USAGE(.BOTH.,#310763); +#310763 = SURFACE_SIDE_STYLE('',(#310764)); +#310764 = SURFACE_STYLE_FILL_AREA(#310765); +#310765 = FILL_AREA_STYLE('',(#310766)); +#310766 = FILL_AREA_STYLE_COLOUR('',#285989); +#310767 = CURVE_STYLE('',#310768,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310769 = OVER_RIDING_STYLED_ITEM('overriding color',(#310770),#118737, + #310751); +#310770 = PRESENTATION_STYLE_ASSIGNMENT((#310771,#310776)); +#310771 = SURFACE_STYLE_USAGE(.BOTH.,#310772); +#310772 = SURFACE_SIDE_STYLE('',(#310773)); +#310773 = SURFACE_STYLE_FILL_AREA(#310774); +#310774 = FILL_AREA_STYLE('',(#310775)); +#310775 = FILL_AREA_STYLE_COLOUR('',#285989); +#310776 = CURVE_STYLE('',#310777,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310778 = STYLED_ITEM('color',(#310779),#118763); +#310779 = PRESENTATION_STYLE_ASSIGNMENT((#310780,#310785)); +#310780 = SURFACE_STYLE_USAGE(.BOTH.,#310781); +#310781 = SURFACE_SIDE_STYLE('',(#310782)); +#310782 = SURFACE_STYLE_FILL_AREA(#310783); +#310783 = FILL_AREA_STYLE('',(#310784)); +#310784 = FILL_AREA_STYLE_COLOUR('',#270350); +#310785 = CURVE_STYLE('',#310786,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310787 = STYLED_ITEM('color',(#310788),#118787); +#310788 = PRESENTATION_STYLE_ASSIGNMENT((#310789,#310794)); +#310789 = SURFACE_STYLE_USAGE(.BOTH.,#310790); +#310790 = SURFACE_SIDE_STYLE('',(#310791)); +#310791 = SURFACE_STYLE_FILL_AREA(#310792); +#310792 = FILL_AREA_STYLE('',(#310793)); +#310793 = FILL_AREA_STYLE_COLOUR('',#270350); +#310794 = CURVE_STYLE('',#310795,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310796 = OVER_RIDING_STYLED_ITEM('overriding color',(#310797),#118801, + #310787); +#310797 = PRESENTATION_STYLE_ASSIGNMENT((#310798,#310803)); +#310798 = SURFACE_STYLE_USAGE(.BOTH.,#310799); +#310799 = SURFACE_SIDE_STYLE('',(#310800)); +#310800 = SURFACE_STYLE_FILL_AREA(#310801); +#310801 = FILL_AREA_STYLE('',(#310802)); +#310802 = FILL_AREA_STYLE_COLOUR('',#285989); +#310803 = CURVE_STYLE('',#310804,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310805 = OVER_RIDING_STYLED_ITEM('overriding color',(#310806),#118817, + #310787); +#310806 = PRESENTATION_STYLE_ASSIGNMENT((#310807,#310812)); +#310807 = SURFACE_STYLE_USAGE(.BOTH.,#310808); +#310808 = SURFACE_SIDE_STYLE('',(#310809)); +#310809 = SURFACE_STYLE_FILL_AREA(#310810); +#310810 = FILL_AREA_STYLE('',(#310811)); +#310811 = FILL_AREA_STYLE_COLOUR('',#285989); +#310812 = CURVE_STYLE('',#310813,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310814 = STYLED_ITEM('color',(#310815),#118836); +#310815 = PRESENTATION_STYLE_ASSIGNMENT((#310816,#310821)); +#310816 = SURFACE_STYLE_USAGE(.BOTH.,#310817); +#310817 = SURFACE_SIDE_STYLE('',(#310818)); +#310818 = SURFACE_STYLE_FILL_AREA(#310819); +#310819 = FILL_AREA_STYLE('',(#310820)); +#310820 = FILL_AREA_STYLE_COLOUR('',#270350); +#310821 = CURVE_STYLE('',#310822,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310823 = STYLED_ITEM('color',(#310824),#118867); +#310824 = PRESENTATION_STYLE_ASSIGNMENT((#310825,#310830)); +#310825 = SURFACE_STYLE_USAGE(.BOTH.,#310826); +#310826 = SURFACE_SIDE_STYLE('',(#310827)); +#310827 = SURFACE_STYLE_FILL_AREA(#310828); +#310828 = FILL_AREA_STYLE('',(#310829)); +#310829 = FILL_AREA_STYLE_COLOUR('',#270350); +#310830 = CURVE_STYLE('',#310831,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310832 = OVER_RIDING_STYLED_ITEM('overriding color',(#310833),#118881, + #310823); +#310833 = PRESENTATION_STYLE_ASSIGNMENT((#310834,#310839)); +#310834 = SURFACE_STYLE_USAGE(.BOTH.,#310835); +#310835 = SURFACE_SIDE_STYLE('',(#310836)); +#310836 = SURFACE_STYLE_FILL_AREA(#310837); +#310837 = FILL_AREA_STYLE('',(#310838)); +#310838 = FILL_AREA_STYLE_COLOUR('',#285989); +#310839 = CURVE_STYLE('',#310840,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310841 = OVER_RIDING_STYLED_ITEM('overriding color',(#310842),#118897, + #310823); +#310842 = PRESENTATION_STYLE_ASSIGNMENT((#310843,#310848)); +#310843 = SURFACE_STYLE_USAGE(.BOTH.,#310844); +#310844 = SURFACE_SIDE_STYLE('',(#310845)); +#310845 = SURFACE_STYLE_FILL_AREA(#310846); +#310846 = FILL_AREA_STYLE('',(#310847)); +#310847 = FILL_AREA_STYLE_COLOUR('',#285989); +#310848 = CURVE_STYLE('',#310849,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310850 = STYLED_ITEM('color',(#310851),#118923); +#310851 = PRESENTATION_STYLE_ASSIGNMENT((#310852,#310857)); +#310852 = SURFACE_STYLE_USAGE(.BOTH.,#310853); +#310853 = SURFACE_SIDE_STYLE('',(#310854)); +#310854 = SURFACE_STYLE_FILL_AREA(#310855); +#310855 = FILL_AREA_STYLE('',(#310856)); +#310856 = FILL_AREA_STYLE_COLOUR('',#270350); +#310857 = CURVE_STYLE('',#310858,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310859 = STYLED_ITEM('color',(#310860),#118947); +#310860 = PRESENTATION_STYLE_ASSIGNMENT((#310861,#310866)); +#310861 = SURFACE_STYLE_USAGE(.BOTH.,#310862); +#310862 = SURFACE_SIDE_STYLE('',(#310863)); +#310863 = SURFACE_STYLE_FILL_AREA(#310864); +#310864 = FILL_AREA_STYLE('',(#310865)); +#310865 = FILL_AREA_STYLE_COLOUR('',#270350); +#310866 = CURVE_STYLE('',#310867,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310868 = OVER_RIDING_STYLED_ITEM('overriding color',(#310869),#118961, + #310859); +#310869 = PRESENTATION_STYLE_ASSIGNMENT((#310870,#310875)); +#310870 = SURFACE_STYLE_USAGE(.BOTH.,#310871); +#310871 = SURFACE_SIDE_STYLE('',(#310872)); +#310872 = SURFACE_STYLE_FILL_AREA(#310873); +#310873 = FILL_AREA_STYLE('',(#310874)); +#310874 = FILL_AREA_STYLE_COLOUR('',#285989); +#310875 = CURVE_STYLE('',#310876,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310877 = OVER_RIDING_STYLED_ITEM('overriding color',(#310878),#118977, + #310859); +#310878 = PRESENTATION_STYLE_ASSIGNMENT((#310879,#310884)); +#310879 = SURFACE_STYLE_USAGE(.BOTH.,#310880); +#310880 = SURFACE_SIDE_STYLE('',(#310881)); +#310881 = SURFACE_STYLE_FILL_AREA(#310882); +#310882 = FILL_AREA_STYLE('',(#310883)); +#310883 = FILL_AREA_STYLE_COLOUR('',#285989); +#310884 = CURVE_STYLE('',#310885,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310886 = STYLED_ITEM('color',(#310887),#118996); +#310887 = PRESENTATION_STYLE_ASSIGNMENT((#310888,#310893)); +#310888 = SURFACE_STYLE_USAGE(.BOTH.,#310889); +#310889 = SURFACE_SIDE_STYLE('',(#310890)); +#310890 = SURFACE_STYLE_FILL_AREA(#310891); +#310891 = FILL_AREA_STYLE('',(#310892)); +#310892 = FILL_AREA_STYLE_COLOUR('',#270350); +#310893 = CURVE_STYLE('',#310894,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310895 = STYLED_ITEM('color',(#310896),#119027); +#310896 = PRESENTATION_STYLE_ASSIGNMENT((#310897,#310902)); +#310897 = SURFACE_STYLE_USAGE(.BOTH.,#310898); +#310898 = SURFACE_SIDE_STYLE('',(#310899)); +#310899 = SURFACE_STYLE_FILL_AREA(#310900); +#310900 = FILL_AREA_STYLE('',(#310901)); +#310901 = FILL_AREA_STYLE_COLOUR('',#270350); +#310902 = CURVE_STYLE('',#310903,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310904 = OVER_RIDING_STYLED_ITEM('overriding color',(#310905),#119041, + #310895); +#310905 = PRESENTATION_STYLE_ASSIGNMENT((#310906,#310911)); +#310906 = SURFACE_STYLE_USAGE(.BOTH.,#310907); +#310907 = SURFACE_SIDE_STYLE('',(#310908)); +#310908 = SURFACE_STYLE_FILL_AREA(#310909); +#310909 = FILL_AREA_STYLE('',(#310910)); +#310910 = FILL_AREA_STYLE_COLOUR('',#285989); +#310911 = CURVE_STYLE('',#310912,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310913 = OVER_RIDING_STYLED_ITEM('overriding color',(#310914),#119057, + #310895); +#310914 = PRESENTATION_STYLE_ASSIGNMENT((#310915,#310920)); +#310915 = SURFACE_STYLE_USAGE(.BOTH.,#310916); +#310916 = SURFACE_SIDE_STYLE('',(#310917)); +#310917 = SURFACE_STYLE_FILL_AREA(#310918); +#310918 = FILL_AREA_STYLE('',(#310919)); +#310919 = FILL_AREA_STYLE_COLOUR('',#285989); +#310920 = CURVE_STYLE('',#310921,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310922 = STYLED_ITEM('color',(#310923),#119083); +#310923 = PRESENTATION_STYLE_ASSIGNMENT((#310924,#310929)); +#310924 = SURFACE_STYLE_USAGE(.BOTH.,#310925); +#310925 = SURFACE_SIDE_STYLE('',(#310926)); +#310926 = SURFACE_STYLE_FILL_AREA(#310927); +#310927 = FILL_AREA_STYLE('',(#310928)); +#310928 = FILL_AREA_STYLE_COLOUR('',#270350); +#310929 = CURVE_STYLE('',#310930,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310931 = STYLED_ITEM('color',(#310932),#119107); +#310932 = PRESENTATION_STYLE_ASSIGNMENT((#310933,#310938)); +#310933 = SURFACE_STYLE_USAGE(.BOTH.,#310934); +#310934 = SURFACE_SIDE_STYLE('',(#310935)); +#310935 = SURFACE_STYLE_FILL_AREA(#310936); +#310936 = FILL_AREA_STYLE('',(#310937)); +#310937 = FILL_AREA_STYLE_COLOUR('',#270350); +#310938 = CURVE_STYLE('',#310939,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310940 = OVER_RIDING_STYLED_ITEM('overriding color',(#310941),#119121, + #310931); +#310941 = PRESENTATION_STYLE_ASSIGNMENT((#310942,#310947)); +#310942 = SURFACE_STYLE_USAGE(.BOTH.,#310943); +#310943 = SURFACE_SIDE_STYLE('',(#310944)); +#310944 = SURFACE_STYLE_FILL_AREA(#310945); +#310945 = FILL_AREA_STYLE('',(#310946)); +#310946 = FILL_AREA_STYLE_COLOUR('',#285989); +#310947 = CURVE_STYLE('',#310948,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310949 = OVER_RIDING_STYLED_ITEM('overriding color',(#310950),#119137, + #310931); +#310950 = PRESENTATION_STYLE_ASSIGNMENT((#310951,#310956)); +#310951 = SURFACE_STYLE_USAGE(.BOTH.,#310952); +#310952 = SURFACE_SIDE_STYLE('',(#310953)); +#310953 = SURFACE_STYLE_FILL_AREA(#310954); +#310954 = FILL_AREA_STYLE('',(#310955)); +#310955 = FILL_AREA_STYLE_COLOUR('',#285989); +#310956 = CURVE_STYLE('',#310957,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310958 = STYLED_ITEM('color',(#310959),#119156); +#310959 = PRESENTATION_STYLE_ASSIGNMENT((#310960,#310965)); +#310960 = SURFACE_STYLE_USAGE(.BOTH.,#310961); +#310961 = SURFACE_SIDE_STYLE('',(#310962)); +#310962 = SURFACE_STYLE_FILL_AREA(#310963); +#310963 = FILL_AREA_STYLE('',(#310964)); +#310964 = FILL_AREA_STYLE_COLOUR('',#270350); +#310965 = CURVE_STYLE('',#310966,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310967 = STYLED_ITEM('color',(#310968),#119187); +#310968 = PRESENTATION_STYLE_ASSIGNMENT((#310969,#310974)); +#310969 = SURFACE_STYLE_USAGE(.BOTH.,#310970); +#310970 = SURFACE_SIDE_STYLE('',(#310971)); +#310971 = SURFACE_STYLE_FILL_AREA(#310972); +#310972 = FILL_AREA_STYLE('',(#310973)); +#310973 = FILL_AREA_STYLE_COLOUR('',#270350); +#310974 = CURVE_STYLE('',#310975,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#310975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310976 = OVER_RIDING_STYLED_ITEM('overriding color',(#310977),#119201, + #310967); +#310977 = PRESENTATION_STYLE_ASSIGNMENT((#310978,#310983)); +#310978 = SURFACE_STYLE_USAGE(.BOTH.,#310979); +#310979 = SURFACE_SIDE_STYLE('',(#310980)); +#310980 = SURFACE_STYLE_FILL_AREA(#310981); +#310981 = FILL_AREA_STYLE('',(#310982)); +#310982 = FILL_AREA_STYLE_COLOUR('',#285989); +#310983 = CURVE_STYLE('',#310984,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310985 = OVER_RIDING_STYLED_ITEM('overriding color',(#310986),#119217, + #310967); +#310986 = PRESENTATION_STYLE_ASSIGNMENT((#310987,#310992)); +#310987 = SURFACE_STYLE_USAGE(.BOTH.,#310988); +#310988 = SURFACE_SIDE_STYLE('',(#310989)); +#310989 = SURFACE_STYLE_FILL_AREA(#310990); +#310990 = FILL_AREA_STYLE('',(#310991)); +#310991 = FILL_AREA_STYLE_COLOUR('',#285989); +#310992 = CURVE_STYLE('',#310993,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#310993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#310994 = STYLED_ITEM('color',(#310995),#119243); +#310995 = PRESENTATION_STYLE_ASSIGNMENT((#310996,#311001)); +#310996 = SURFACE_STYLE_USAGE(.BOTH.,#310997); +#310997 = SURFACE_SIDE_STYLE('',(#310998)); +#310998 = SURFACE_STYLE_FILL_AREA(#310999); +#310999 = FILL_AREA_STYLE('',(#311000)); +#311000 = FILL_AREA_STYLE_COLOUR('',#270350); +#311001 = CURVE_STYLE('',#311002,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311003 = STYLED_ITEM('color',(#311004),#119267); +#311004 = PRESENTATION_STYLE_ASSIGNMENT((#311005,#311010)); +#311005 = SURFACE_STYLE_USAGE(.BOTH.,#311006); +#311006 = SURFACE_SIDE_STYLE('',(#311007)); +#311007 = SURFACE_STYLE_FILL_AREA(#311008); +#311008 = FILL_AREA_STYLE('',(#311009)); +#311009 = FILL_AREA_STYLE_COLOUR('',#270350); +#311010 = CURVE_STYLE('',#311011,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311012 = OVER_RIDING_STYLED_ITEM('overriding color',(#311013),#119281, + #311003); +#311013 = PRESENTATION_STYLE_ASSIGNMENT((#311014,#311019)); +#311014 = SURFACE_STYLE_USAGE(.BOTH.,#311015); +#311015 = SURFACE_SIDE_STYLE('',(#311016)); +#311016 = SURFACE_STYLE_FILL_AREA(#311017); +#311017 = FILL_AREA_STYLE('',(#311018)); +#311018 = FILL_AREA_STYLE_COLOUR('',#285989); +#311019 = CURVE_STYLE('',#311020,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311021 = OVER_RIDING_STYLED_ITEM('overriding color',(#311022),#119297, + #311003); +#311022 = PRESENTATION_STYLE_ASSIGNMENT((#311023,#311028)); +#311023 = SURFACE_STYLE_USAGE(.BOTH.,#311024); +#311024 = SURFACE_SIDE_STYLE('',(#311025)); +#311025 = SURFACE_STYLE_FILL_AREA(#311026); +#311026 = FILL_AREA_STYLE('',(#311027)); +#311027 = FILL_AREA_STYLE_COLOUR('',#285989); +#311028 = CURVE_STYLE('',#311029,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311030 = STYLED_ITEM('color',(#311031),#119316); +#311031 = PRESENTATION_STYLE_ASSIGNMENT((#311032,#311037)); +#311032 = SURFACE_STYLE_USAGE(.BOTH.,#311033); +#311033 = SURFACE_SIDE_STYLE('',(#311034)); +#311034 = SURFACE_STYLE_FILL_AREA(#311035); +#311035 = FILL_AREA_STYLE('',(#311036)); +#311036 = FILL_AREA_STYLE_COLOUR('',#270350); +#311037 = CURVE_STYLE('',#311038,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311039 = STYLED_ITEM('color',(#311040),#119347); +#311040 = PRESENTATION_STYLE_ASSIGNMENT((#311041,#311046)); +#311041 = SURFACE_STYLE_USAGE(.BOTH.,#311042); +#311042 = SURFACE_SIDE_STYLE('',(#311043)); +#311043 = SURFACE_STYLE_FILL_AREA(#311044); +#311044 = FILL_AREA_STYLE('',(#311045)); +#311045 = FILL_AREA_STYLE_COLOUR('',#270350); +#311046 = CURVE_STYLE('',#311047,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311048 = OVER_RIDING_STYLED_ITEM('overriding color',(#311049),#119361, + #311039); +#311049 = PRESENTATION_STYLE_ASSIGNMENT((#311050,#311055)); +#311050 = SURFACE_STYLE_USAGE(.BOTH.,#311051); +#311051 = SURFACE_SIDE_STYLE('',(#311052)); +#311052 = SURFACE_STYLE_FILL_AREA(#311053); +#311053 = FILL_AREA_STYLE('',(#311054)); +#311054 = FILL_AREA_STYLE_COLOUR('',#285989); +#311055 = CURVE_STYLE('',#311056,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311057 = OVER_RIDING_STYLED_ITEM('overriding color',(#311058),#119377, + #311039); +#311058 = PRESENTATION_STYLE_ASSIGNMENT((#311059,#311064)); +#311059 = SURFACE_STYLE_USAGE(.BOTH.,#311060); +#311060 = SURFACE_SIDE_STYLE('',(#311061)); +#311061 = SURFACE_STYLE_FILL_AREA(#311062); +#311062 = FILL_AREA_STYLE('',(#311063)); +#311063 = FILL_AREA_STYLE_COLOUR('',#285989); +#311064 = CURVE_STYLE('',#311065,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311066 = STYLED_ITEM('color',(#311067),#119403); +#311067 = PRESENTATION_STYLE_ASSIGNMENT((#311068,#311073)); +#311068 = SURFACE_STYLE_USAGE(.BOTH.,#311069); +#311069 = SURFACE_SIDE_STYLE('',(#311070)); +#311070 = SURFACE_STYLE_FILL_AREA(#311071); +#311071 = FILL_AREA_STYLE('',(#311072)); +#311072 = FILL_AREA_STYLE_COLOUR('',#270350); +#311073 = CURVE_STYLE('',#311074,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311075 = STYLED_ITEM('color',(#311076),#119427); +#311076 = PRESENTATION_STYLE_ASSIGNMENT((#311077,#311082)); +#311077 = SURFACE_STYLE_USAGE(.BOTH.,#311078); +#311078 = SURFACE_SIDE_STYLE('',(#311079)); +#311079 = SURFACE_STYLE_FILL_AREA(#311080); +#311080 = FILL_AREA_STYLE('',(#311081)); +#311081 = FILL_AREA_STYLE_COLOUR('',#270350); +#311082 = CURVE_STYLE('',#311083,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311084 = OVER_RIDING_STYLED_ITEM('overriding color',(#311085),#119441, + #311075); +#311085 = PRESENTATION_STYLE_ASSIGNMENT((#311086,#311091)); +#311086 = SURFACE_STYLE_USAGE(.BOTH.,#311087); +#311087 = SURFACE_SIDE_STYLE('',(#311088)); +#311088 = SURFACE_STYLE_FILL_AREA(#311089); +#311089 = FILL_AREA_STYLE('',(#311090)); +#311090 = FILL_AREA_STYLE_COLOUR('',#285989); +#311091 = CURVE_STYLE('',#311092,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311093 = OVER_RIDING_STYLED_ITEM('overriding color',(#311094),#119457, + #311075); +#311094 = PRESENTATION_STYLE_ASSIGNMENT((#311095,#311100)); +#311095 = SURFACE_STYLE_USAGE(.BOTH.,#311096); +#311096 = SURFACE_SIDE_STYLE('',(#311097)); +#311097 = SURFACE_STYLE_FILL_AREA(#311098); +#311098 = FILL_AREA_STYLE('',(#311099)); +#311099 = FILL_AREA_STYLE_COLOUR('',#285989); +#311100 = CURVE_STYLE('',#311101,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311102 = STYLED_ITEM('color',(#311103),#119476); +#311103 = PRESENTATION_STYLE_ASSIGNMENT((#311104,#311109)); +#311104 = SURFACE_STYLE_USAGE(.BOTH.,#311105); +#311105 = SURFACE_SIDE_STYLE('',(#311106)); +#311106 = SURFACE_STYLE_FILL_AREA(#311107); +#311107 = FILL_AREA_STYLE('',(#311108)); +#311108 = FILL_AREA_STYLE_COLOUR('',#270350); +#311109 = CURVE_STYLE('',#311110,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311111 = STYLED_ITEM('color',(#311112),#119507); +#311112 = PRESENTATION_STYLE_ASSIGNMENT((#311113,#311118)); +#311113 = SURFACE_STYLE_USAGE(.BOTH.,#311114); +#311114 = SURFACE_SIDE_STYLE('',(#311115)); +#311115 = SURFACE_STYLE_FILL_AREA(#311116); +#311116 = FILL_AREA_STYLE('',(#311117)); +#311117 = FILL_AREA_STYLE_COLOUR('',#270350); +#311118 = CURVE_STYLE('',#311119,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311120 = OVER_RIDING_STYLED_ITEM('overriding color',(#311121),#119521, + #311111); +#311121 = PRESENTATION_STYLE_ASSIGNMENT((#311122,#311127)); +#311122 = SURFACE_STYLE_USAGE(.BOTH.,#311123); +#311123 = SURFACE_SIDE_STYLE('',(#311124)); +#311124 = SURFACE_STYLE_FILL_AREA(#311125); +#311125 = FILL_AREA_STYLE('',(#311126)); +#311126 = FILL_AREA_STYLE_COLOUR('',#285989); +#311127 = CURVE_STYLE('',#311128,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311129 = OVER_RIDING_STYLED_ITEM('overriding color',(#311130),#119537, + #311111); +#311130 = PRESENTATION_STYLE_ASSIGNMENT((#311131,#311136)); +#311131 = SURFACE_STYLE_USAGE(.BOTH.,#311132); +#311132 = SURFACE_SIDE_STYLE('',(#311133)); +#311133 = SURFACE_STYLE_FILL_AREA(#311134); +#311134 = FILL_AREA_STYLE('',(#311135)); +#311135 = FILL_AREA_STYLE_COLOUR('',#285989); +#311136 = CURVE_STYLE('',#311137,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311138 = STYLED_ITEM('color',(#311139),#119563); +#311139 = PRESENTATION_STYLE_ASSIGNMENT((#311140,#311145)); +#311140 = SURFACE_STYLE_USAGE(.BOTH.,#311141); +#311141 = SURFACE_SIDE_STYLE('',(#311142)); +#311142 = SURFACE_STYLE_FILL_AREA(#311143); +#311143 = FILL_AREA_STYLE('',(#311144)); +#311144 = FILL_AREA_STYLE_COLOUR('',#270350); +#311145 = CURVE_STYLE('',#311146,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311147 = STYLED_ITEM('color',(#311148),#119587); +#311148 = PRESENTATION_STYLE_ASSIGNMENT((#311149,#311154)); +#311149 = SURFACE_STYLE_USAGE(.BOTH.,#311150); +#311150 = SURFACE_SIDE_STYLE('',(#311151)); +#311151 = SURFACE_STYLE_FILL_AREA(#311152); +#311152 = FILL_AREA_STYLE('',(#311153)); +#311153 = FILL_AREA_STYLE_COLOUR('',#270350); +#311154 = CURVE_STYLE('',#311155,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311156 = OVER_RIDING_STYLED_ITEM('overriding color',(#311157),#119601, + #311147); +#311157 = PRESENTATION_STYLE_ASSIGNMENT((#311158,#311163)); +#311158 = SURFACE_STYLE_USAGE(.BOTH.,#311159); +#311159 = SURFACE_SIDE_STYLE('',(#311160)); +#311160 = SURFACE_STYLE_FILL_AREA(#311161); +#311161 = FILL_AREA_STYLE('',(#311162)); +#311162 = FILL_AREA_STYLE_COLOUR('',#285989); +#311163 = CURVE_STYLE('',#311164,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311165 = OVER_RIDING_STYLED_ITEM('overriding color',(#311166),#119617, + #311147); +#311166 = PRESENTATION_STYLE_ASSIGNMENT((#311167,#311172)); +#311167 = SURFACE_STYLE_USAGE(.BOTH.,#311168); +#311168 = SURFACE_SIDE_STYLE('',(#311169)); +#311169 = SURFACE_STYLE_FILL_AREA(#311170); +#311170 = FILL_AREA_STYLE('',(#311171)); +#311171 = FILL_AREA_STYLE_COLOUR('',#285989); +#311172 = CURVE_STYLE('',#311173,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311174 = STYLED_ITEM('color',(#311175),#119636); +#311175 = PRESENTATION_STYLE_ASSIGNMENT((#311176,#311181)); +#311176 = SURFACE_STYLE_USAGE(.BOTH.,#311177); +#311177 = SURFACE_SIDE_STYLE('',(#311178)); +#311178 = SURFACE_STYLE_FILL_AREA(#311179); +#311179 = FILL_AREA_STYLE('',(#311180)); +#311180 = FILL_AREA_STYLE_COLOUR('',#270350); +#311181 = CURVE_STYLE('',#311182,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311183 = STYLED_ITEM('color',(#311184),#119667); +#311184 = PRESENTATION_STYLE_ASSIGNMENT((#311185,#311190)); +#311185 = SURFACE_STYLE_USAGE(.BOTH.,#311186); +#311186 = SURFACE_SIDE_STYLE('',(#311187)); +#311187 = SURFACE_STYLE_FILL_AREA(#311188); +#311188 = FILL_AREA_STYLE('',(#311189)); +#311189 = FILL_AREA_STYLE_COLOUR('',#270350); +#311190 = CURVE_STYLE('',#311191,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311192 = OVER_RIDING_STYLED_ITEM('overriding color',(#311193),#119681, + #311183); +#311193 = PRESENTATION_STYLE_ASSIGNMENT((#311194,#311199)); +#311194 = SURFACE_STYLE_USAGE(.BOTH.,#311195); +#311195 = SURFACE_SIDE_STYLE('',(#311196)); +#311196 = SURFACE_STYLE_FILL_AREA(#311197); +#311197 = FILL_AREA_STYLE('',(#311198)); +#311198 = FILL_AREA_STYLE_COLOUR('',#285989); +#311199 = CURVE_STYLE('',#311200,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311201 = OVER_RIDING_STYLED_ITEM('overriding color',(#311202),#119697, + #311183); +#311202 = PRESENTATION_STYLE_ASSIGNMENT((#311203,#311208)); +#311203 = SURFACE_STYLE_USAGE(.BOTH.,#311204); +#311204 = SURFACE_SIDE_STYLE('',(#311205)); +#311205 = SURFACE_STYLE_FILL_AREA(#311206); +#311206 = FILL_AREA_STYLE('',(#311207)); +#311207 = FILL_AREA_STYLE_COLOUR('',#285989); +#311208 = CURVE_STYLE('',#311209,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311210 = STYLED_ITEM('color',(#311211),#119723); +#311211 = PRESENTATION_STYLE_ASSIGNMENT((#311212,#311217)); +#311212 = SURFACE_STYLE_USAGE(.BOTH.,#311213); +#311213 = SURFACE_SIDE_STYLE('',(#311214)); +#311214 = SURFACE_STYLE_FILL_AREA(#311215); +#311215 = FILL_AREA_STYLE('',(#311216)); +#311216 = FILL_AREA_STYLE_COLOUR('',#270350); +#311217 = CURVE_STYLE('',#311218,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311219 = STYLED_ITEM('color',(#311220),#119747); +#311220 = PRESENTATION_STYLE_ASSIGNMENT((#311221,#311226)); +#311221 = SURFACE_STYLE_USAGE(.BOTH.,#311222); +#311222 = SURFACE_SIDE_STYLE('',(#311223)); +#311223 = SURFACE_STYLE_FILL_AREA(#311224); +#311224 = FILL_AREA_STYLE('',(#311225)); +#311225 = FILL_AREA_STYLE_COLOUR('',#270350); +#311226 = CURVE_STYLE('',#311227,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311228 = OVER_RIDING_STYLED_ITEM('overriding color',(#311229),#119761, + #311219); +#311229 = PRESENTATION_STYLE_ASSIGNMENT((#311230,#311235)); +#311230 = SURFACE_STYLE_USAGE(.BOTH.,#311231); +#311231 = SURFACE_SIDE_STYLE('',(#311232)); +#311232 = SURFACE_STYLE_FILL_AREA(#311233); +#311233 = FILL_AREA_STYLE('',(#311234)); +#311234 = FILL_AREA_STYLE_COLOUR('',#285989); +#311235 = CURVE_STYLE('',#311236,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311237 = OVER_RIDING_STYLED_ITEM('overriding color',(#311238),#119777, + #311219); +#311238 = PRESENTATION_STYLE_ASSIGNMENT((#311239,#311244)); +#311239 = SURFACE_STYLE_USAGE(.BOTH.,#311240); +#311240 = SURFACE_SIDE_STYLE('',(#311241)); +#311241 = SURFACE_STYLE_FILL_AREA(#311242); +#311242 = FILL_AREA_STYLE('',(#311243)); +#311243 = FILL_AREA_STYLE_COLOUR('',#285989); +#311244 = CURVE_STYLE('',#311245,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311246 = STYLED_ITEM('color',(#311247),#119796); +#311247 = PRESENTATION_STYLE_ASSIGNMENT((#311248,#311253)); +#311248 = SURFACE_STYLE_USAGE(.BOTH.,#311249); +#311249 = SURFACE_SIDE_STYLE('',(#311250)); +#311250 = SURFACE_STYLE_FILL_AREA(#311251); +#311251 = FILL_AREA_STYLE('',(#311252)); +#311252 = FILL_AREA_STYLE_COLOUR('',#270350); +#311253 = CURVE_STYLE('',#311254,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311255 = STYLED_ITEM('color',(#311256),#119827); +#311256 = PRESENTATION_STYLE_ASSIGNMENT((#311257,#311262)); +#311257 = SURFACE_STYLE_USAGE(.BOTH.,#311258); +#311258 = SURFACE_SIDE_STYLE('',(#311259)); +#311259 = SURFACE_STYLE_FILL_AREA(#311260); +#311260 = FILL_AREA_STYLE('',(#311261)); +#311261 = FILL_AREA_STYLE_COLOUR('',#270350); +#311262 = CURVE_STYLE('',#311263,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311264 = OVER_RIDING_STYLED_ITEM('overriding color',(#311265),#119841, + #311255); +#311265 = PRESENTATION_STYLE_ASSIGNMENT((#311266,#311271)); +#311266 = SURFACE_STYLE_USAGE(.BOTH.,#311267); +#311267 = SURFACE_SIDE_STYLE('',(#311268)); +#311268 = SURFACE_STYLE_FILL_AREA(#311269); +#311269 = FILL_AREA_STYLE('',(#311270)); +#311270 = FILL_AREA_STYLE_COLOUR('',#285989); +#311271 = CURVE_STYLE('',#311272,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311273 = OVER_RIDING_STYLED_ITEM('overriding color',(#311274),#119857, + #311255); +#311274 = PRESENTATION_STYLE_ASSIGNMENT((#311275,#311280)); +#311275 = SURFACE_STYLE_USAGE(.BOTH.,#311276); +#311276 = SURFACE_SIDE_STYLE('',(#311277)); +#311277 = SURFACE_STYLE_FILL_AREA(#311278); +#311278 = FILL_AREA_STYLE('',(#311279)); +#311279 = FILL_AREA_STYLE_COLOUR('',#285989); +#311280 = CURVE_STYLE('',#311281,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311282 = STYLED_ITEM('color',(#311283),#119883); +#311283 = PRESENTATION_STYLE_ASSIGNMENT((#311284,#311289)); +#311284 = SURFACE_STYLE_USAGE(.BOTH.,#311285); +#311285 = SURFACE_SIDE_STYLE('',(#311286)); +#311286 = SURFACE_STYLE_FILL_AREA(#311287); +#311287 = FILL_AREA_STYLE('',(#311288)); +#311288 = FILL_AREA_STYLE_COLOUR('',#270350); +#311289 = CURVE_STYLE('',#311290,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311291 = STYLED_ITEM('color',(#311292),#119907); +#311292 = PRESENTATION_STYLE_ASSIGNMENT((#311293,#311298)); +#311293 = SURFACE_STYLE_USAGE(.BOTH.,#311294); +#311294 = SURFACE_SIDE_STYLE('',(#311295)); +#311295 = SURFACE_STYLE_FILL_AREA(#311296); +#311296 = FILL_AREA_STYLE('',(#311297)); +#311297 = FILL_AREA_STYLE_COLOUR('',#270350); +#311298 = CURVE_STYLE('',#311299,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311300 = OVER_RIDING_STYLED_ITEM('overriding color',(#311301),#119921, + #311291); +#311301 = PRESENTATION_STYLE_ASSIGNMENT((#311302,#311307)); +#311302 = SURFACE_STYLE_USAGE(.BOTH.,#311303); +#311303 = SURFACE_SIDE_STYLE('',(#311304)); +#311304 = SURFACE_STYLE_FILL_AREA(#311305); +#311305 = FILL_AREA_STYLE('',(#311306)); +#311306 = FILL_AREA_STYLE_COLOUR('',#285989); +#311307 = CURVE_STYLE('',#311308,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311309 = OVER_RIDING_STYLED_ITEM('overriding color',(#311310),#119937, + #311291); +#311310 = PRESENTATION_STYLE_ASSIGNMENT((#311311,#311316)); +#311311 = SURFACE_STYLE_USAGE(.BOTH.,#311312); +#311312 = SURFACE_SIDE_STYLE('',(#311313)); +#311313 = SURFACE_STYLE_FILL_AREA(#311314); +#311314 = FILL_AREA_STYLE('',(#311315)); +#311315 = FILL_AREA_STYLE_COLOUR('',#285989); +#311316 = CURVE_STYLE('',#311317,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311318 = STYLED_ITEM('color',(#311319),#119956); +#311319 = PRESENTATION_STYLE_ASSIGNMENT((#311320,#311325)); +#311320 = SURFACE_STYLE_USAGE(.BOTH.,#311321); +#311321 = SURFACE_SIDE_STYLE('',(#311322)); +#311322 = SURFACE_STYLE_FILL_AREA(#311323); +#311323 = FILL_AREA_STYLE('',(#311324)); +#311324 = FILL_AREA_STYLE_COLOUR('',#270350); +#311325 = CURVE_STYLE('',#311326,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311327 = STYLED_ITEM('color',(#311328),#119987); +#311328 = PRESENTATION_STYLE_ASSIGNMENT((#311329,#311334)); +#311329 = SURFACE_STYLE_USAGE(.BOTH.,#311330); +#311330 = SURFACE_SIDE_STYLE('',(#311331)); +#311331 = SURFACE_STYLE_FILL_AREA(#311332); +#311332 = FILL_AREA_STYLE('',(#311333)); +#311333 = FILL_AREA_STYLE_COLOUR('',#270350); +#311334 = CURVE_STYLE('',#311335,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311336 = OVER_RIDING_STYLED_ITEM('overriding color',(#311337),#120001, + #311327); +#311337 = PRESENTATION_STYLE_ASSIGNMENT((#311338,#311343)); +#311338 = SURFACE_STYLE_USAGE(.BOTH.,#311339); +#311339 = SURFACE_SIDE_STYLE('',(#311340)); +#311340 = SURFACE_STYLE_FILL_AREA(#311341); +#311341 = FILL_AREA_STYLE('',(#311342)); +#311342 = FILL_AREA_STYLE_COLOUR('',#285989); +#311343 = CURVE_STYLE('',#311344,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311345 = OVER_RIDING_STYLED_ITEM('overriding color',(#311346),#120017, + #311327); +#311346 = PRESENTATION_STYLE_ASSIGNMENT((#311347,#311352)); +#311347 = SURFACE_STYLE_USAGE(.BOTH.,#311348); +#311348 = SURFACE_SIDE_STYLE('',(#311349)); +#311349 = SURFACE_STYLE_FILL_AREA(#311350); +#311350 = FILL_AREA_STYLE('',(#311351)); +#311351 = FILL_AREA_STYLE_COLOUR('',#285989); +#311352 = CURVE_STYLE('',#311353,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311354 = STYLED_ITEM('color',(#311355),#120043); +#311355 = PRESENTATION_STYLE_ASSIGNMENT((#311356,#311361)); +#311356 = SURFACE_STYLE_USAGE(.BOTH.,#311357); +#311357 = SURFACE_SIDE_STYLE('',(#311358)); +#311358 = SURFACE_STYLE_FILL_AREA(#311359); +#311359 = FILL_AREA_STYLE('',(#311360)); +#311360 = FILL_AREA_STYLE_COLOUR('',#270350); +#311361 = CURVE_STYLE('',#311362,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311363 = STYLED_ITEM('color',(#311364),#120067); +#311364 = PRESENTATION_STYLE_ASSIGNMENT((#311365,#311370)); +#311365 = SURFACE_STYLE_USAGE(.BOTH.,#311366); +#311366 = SURFACE_SIDE_STYLE('',(#311367)); +#311367 = SURFACE_STYLE_FILL_AREA(#311368); +#311368 = FILL_AREA_STYLE('',(#311369)); +#311369 = FILL_AREA_STYLE_COLOUR('',#270350); +#311370 = CURVE_STYLE('',#311371,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311372 = OVER_RIDING_STYLED_ITEM('overriding color',(#311373),#120081, + #311363); +#311373 = PRESENTATION_STYLE_ASSIGNMENT((#311374,#311379)); +#311374 = SURFACE_STYLE_USAGE(.BOTH.,#311375); +#311375 = SURFACE_SIDE_STYLE('',(#311376)); +#311376 = SURFACE_STYLE_FILL_AREA(#311377); +#311377 = FILL_AREA_STYLE('',(#311378)); +#311378 = FILL_AREA_STYLE_COLOUR('',#285989); +#311379 = CURVE_STYLE('',#311380,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311381 = OVER_RIDING_STYLED_ITEM('overriding color',(#311382),#120097, + #311363); +#311382 = PRESENTATION_STYLE_ASSIGNMENT((#311383,#311388)); +#311383 = SURFACE_STYLE_USAGE(.BOTH.,#311384); +#311384 = SURFACE_SIDE_STYLE('',(#311385)); +#311385 = SURFACE_STYLE_FILL_AREA(#311386); +#311386 = FILL_AREA_STYLE('',(#311387)); +#311387 = FILL_AREA_STYLE_COLOUR('',#285989); +#311388 = CURVE_STYLE('',#311389,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311390 = STYLED_ITEM('color',(#311391),#120116); +#311391 = PRESENTATION_STYLE_ASSIGNMENT((#311392,#311397)); +#311392 = SURFACE_STYLE_USAGE(.BOTH.,#311393); +#311393 = SURFACE_SIDE_STYLE('',(#311394)); +#311394 = SURFACE_STYLE_FILL_AREA(#311395); +#311395 = FILL_AREA_STYLE('',(#311396)); +#311396 = FILL_AREA_STYLE_COLOUR('',#285989); +#311397 = CURVE_STYLE('',#311398,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311399 = STYLED_ITEM('color',(#311400),#120133); +#311400 = PRESENTATION_STYLE_ASSIGNMENT((#311401,#311406)); +#311401 = SURFACE_STYLE_USAGE(.BOTH.,#311402); +#311402 = SURFACE_SIDE_STYLE('',(#311403)); +#311403 = SURFACE_STYLE_FILL_AREA(#311404); +#311404 = FILL_AREA_STYLE('',(#311405)); +#311405 = FILL_AREA_STYLE_COLOUR('',#285989); +#311406 = CURVE_STYLE('',#311407,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311408 = STYLED_ITEM('color',(#311409),#120150); +#311409 = PRESENTATION_STYLE_ASSIGNMENT((#311410,#311415)); +#311410 = SURFACE_STYLE_USAGE(.BOTH.,#311411); +#311411 = SURFACE_SIDE_STYLE('',(#311412)); +#311412 = SURFACE_STYLE_FILL_AREA(#311413); +#311413 = FILL_AREA_STYLE('',(#311414)); +#311414 = FILL_AREA_STYLE_COLOUR('',#285989); +#311415 = CURVE_STYLE('',#311416,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311417 = STYLED_ITEM('color',(#311418),#120167); +#311418 = PRESENTATION_STYLE_ASSIGNMENT((#311419,#311424)); +#311419 = SURFACE_STYLE_USAGE(.BOTH.,#311420); +#311420 = SURFACE_SIDE_STYLE('',(#311421)); +#311421 = SURFACE_STYLE_FILL_AREA(#311422); +#311422 = FILL_AREA_STYLE('',(#311423)); +#311423 = FILL_AREA_STYLE_COLOUR('',#285989); +#311424 = CURVE_STYLE('',#311425,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311426 = STYLED_ITEM('color',(#311427),#120184); +#311427 = PRESENTATION_STYLE_ASSIGNMENT((#311428,#311433)); +#311428 = SURFACE_STYLE_USAGE(.BOTH.,#311429); +#311429 = SURFACE_SIDE_STYLE('',(#311430)); +#311430 = SURFACE_STYLE_FILL_AREA(#311431); +#311431 = FILL_AREA_STYLE('',(#311432)); +#311432 = FILL_AREA_STYLE_COLOUR('',#285989); +#311433 = CURVE_STYLE('',#311434,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311435 = STYLED_ITEM('color',(#311436),#120196); +#311436 = PRESENTATION_STYLE_ASSIGNMENT((#311437,#311442)); +#311437 = SURFACE_STYLE_USAGE(.BOTH.,#311438); +#311438 = SURFACE_SIDE_STYLE('',(#311439)); +#311439 = SURFACE_STYLE_FILL_AREA(#311440); +#311440 = FILL_AREA_STYLE('',(#311441)); +#311441 = FILL_AREA_STYLE_COLOUR('',#285989); +#311442 = CURVE_STYLE('',#311443,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311444 = STYLED_ITEM('color',(#311445),#120213); +#311445 = PRESENTATION_STYLE_ASSIGNMENT((#311446,#311451)); +#311446 = SURFACE_STYLE_USAGE(.BOTH.,#311447); +#311447 = SURFACE_SIDE_STYLE('',(#311448)); +#311448 = SURFACE_STYLE_FILL_AREA(#311449); +#311449 = FILL_AREA_STYLE('',(#311450)); +#311450 = FILL_AREA_STYLE_COLOUR('',#285989); +#311451 = CURVE_STYLE('',#311452,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311453 = STYLED_ITEM('color',(#311454),#120230); +#311454 = PRESENTATION_STYLE_ASSIGNMENT((#311455,#311460)); +#311455 = SURFACE_STYLE_USAGE(.BOTH.,#311456); +#311456 = SURFACE_SIDE_STYLE('',(#311457)); +#311457 = SURFACE_STYLE_FILL_AREA(#311458); +#311458 = FILL_AREA_STYLE('',(#311459)); +#311459 = FILL_AREA_STYLE_COLOUR('',#285989); +#311460 = CURVE_STYLE('',#311461,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311462 = STYLED_ITEM('color',(#311463),#120247); +#311463 = PRESENTATION_STYLE_ASSIGNMENT((#311464,#311469)); +#311464 = SURFACE_STYLE_USAGE(.BOTH.,#311465); +#311465 = SURFACE_SIDE_STYLE('',(#311466)); +#311466 = SURFACE_STYLE_FILL_AREA(#311467); +#311467 = FILL_AREA_STYLE('',(#311468)); +#311468 = FILL_AREA_STYLE_COLOUR('',#285989); +#311469 = CURVE_STYLE('',#311470,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311471 = STYLED_ITEM('color',(#311472),#120264); +#311472 = PRESENTATION_STYLE_ASSIGNMENT((#311473,#311478)); +#311473 = SURFACE_STYLE_USAGE(.BOTH.,#311474); +#311474 = SURFACE_SIDE_STYLE('',(#311475)); +#311475 = SURFACE_STYLE_FILL_AREA(#311476); +#311476 = FILL_AREA_STYLE('',(#311477)); +#311477 = FILL_AREA_STYLE_COLOUR('',#285989); +#311478 = CURVE_STYLE('',#311479,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311480 = STYLED_ITEM('color',(#311481),#120276); +#311481 = PRESENTATION_STYLE_ASSIGNMENT((#311482,#311487)); +#311482 = SURFACE_STYLE_USAGE(.BOTH.,#311483); +#311483 = SURFACE_SIDE_STYLE('',(#311484)); +#311484 = SURFACE_STYLE_FILL_AREA(#311485); +#311485 = FILL_AREA_STYLE('',(#311486)); +#311486 = FILL_AREA_STYLE_COLOUR('',#285989); +#311487 = CURVE_STYLE('',#311488,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311489 = STYLED_ITEM('color',(#311490),#120293); +#311490 = PRESENTATION_STYLE_ASSIGNMENT((#311491,#311496)); +#311491 = SURFACE_STYLE_USAGE(.BOTH.,#311492); +#311492 = SURFACE_SIDE_STYLE('',(#311493)); +#311493 = SURFACE_STYLE_FILL_AREA(#311494); +#311494 = FILL_AREA_STYLE('',(#311495)); +#311495 = FILL_AREA_STYLE_COLOUR('',#285989); +#311496 = CURVE_STYLE('',#311497,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311498 = STYLED_ITEM('color',(#311499),#120310); +#311499 = PRESENTATION_STYLE_ASSIGNMENT((#311500,#311505)); +#311500 = SURFACE_STYLE_USAGE(.BOTH.,#311501); +#311501 = SURFACE_SIDE_STYLE('',(#311502)); +#311502 = SURFACE_STYLE_FILL_AREA(#311503); +#311503 = FILL_AREA_STYLE('',(#311504)); +#311504 = FILL_AREA_STYLE_COLOUR('',#285989); +#311505 = CURVE_STYLE('',#311506,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311507 = STYLED_ITEM('color',(#311508),#120327); +#311508 = PRESENTATION_STYLE_ASSIGNMENT((#311509,#311514)); +#311509 = SURFACE_STYLE_USAGE(.BOTH.,#311510); +#311510 = SURFACE_SIDE_STYLE('',(#311511)); +#311511 = SURFACE_STYLE_FILL_AREA(#311512); +#311512 = FILL_AREA_STYLE('',(#311513)); +#311513 = FILL_AREA_STYLE_COLOUR('',#285989); +#311514 = CURVE_STYLE('',#311515,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311516 = STYLED_ITEM('color',(#311517),#120344); +#311517 = PRESENTATION_STYLE_ASSIGNMENT((#311518,#311523)); +#311518 = SURFACE_STYLE_USAGE(.BOTH.,#311519); +#311519 = SURFACE_SIDE_STYLE('',(#311520)); +#311520 = SURFACE_STYLE_FILL_AREA(#311521); +#311521 = FILL_AREA_STYLE('',(#311522)); +#311522 = FILL_AREA_STYLE_COLOUR('',#285989); +#311523 = CURVE_STYLE('',#311524,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311525 = STYLED_ITEM('color',(#311526),#120356); +#311526 = PRESENTATION_STYLE_ASSIGNMENT((#311527,#311532)); +#311527 = SURFACE_STYLE_USAGE(.BOTH.,#311528); +#311528 = SURFACE_SIDE_STYLE('',(#311529)); +#311529 = SURFACE_STYLE_FILL_AREA(#311530); +#311530 = FILL_AREA_STYLE('',(#311531)); +#311531 = FILL_AREA_STYLE_COLOUR('',#285989); +#311532 = CURVE_STYLE('',#311533,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311534 = STYLED_ITEM('color',(#311535),#120373); +#311535 = PRESENTATION_STYLE_ASSIGNMENT((#311536,#311541)); +#311536 = SURFACE_STYLE_USAGE(.BOTH.,#311537); +#311537 = SURFACE_SIDE_STYLE('',(#311538)); +#311538 = SURFACE_STYLE_FILL_AREA(#311539); +#311539 = FILL_AREA_STYLE('',(#311540)); +#311540 = FILL_AREA_STYLE_COLOUR('',#285989); +#311541 = CURVE_STYLE('',#311542,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311543 = STYLED_ITEM('color',(#311544),#120390); +#311544 = PRESENTATION_STYLE_ASSIGNMENT((#311545,#311550)); +#311545 = SURFACE_STYLE_USAGE(.BOTH.,#311546); +#311546 = SURFACE_SIDE_STYLE('',(#311547)); +#311547 = SURFACE_STYLE_FILL_AREA(#311548); +#311548 = FILL_AREA_STYLE('',(#311549)); +#311549 = FILL_AREA_STYLE_COLOUR('',#285989); +#311550 = CURVE_STYLE('',#311551,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311552 = STYLED_ITEM('color',(#311553),#120407); +#311553 = PRESENTATION_STYLE_ASSIGNMENT((#311554,#311559)); +#311554 = SURFACE_STYLE_USAGE(.BOTH.,#311555); +#311555 = SURFACE_SIDE_STYLE('',(#311556)); +#311556 = SURFACE_STYLE_FILL_AREA(#311557); +#311557 = FILL_AREA_STYLE('',(#311558)); +#311558 = FILL_AREA_STYLE_COLOUR('',#285989); +#311559 = CURVE_STYLE('',#311560,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311561 = STYLED_ITEM('color',(#311562),#120424); +#311562 = PRESENTATION_STYLE_ASSIGNMENT((#311563,#311568)); +#311563 = SURFACE_STYLE_USAGE(.BOTH.,#311564); +#311564 = SURFACE_SIDE_STYLE('',(#311565)); +#311565 = SURFACE_STYLE_FILL_AREA(#311566); +#311566 = FILL_AREA_STYLE('',(#311567)); +#311567 = FILL_AREA_STYLE_COLOUR('',#285989); +#311568 = CURVE_STYLE('',#311569,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311570 = STYLED_ITEM('color',(#311571),#120436); +#311571 = PRESENTATION_STYLE_ASSIGNMENT((#311572,#311577)); +#311572 = SURFACE_STYLE_USAGE(.BOTH.,#311573); +#311573 = SURFACE_SIDE_STYLE('',(#311574)); +#311574 = SURFACE_STYLE_FILL_AREA(#311575); +#311575 = FILL_AREA_STYLE('',(#311576)); +#311576 = FILL_AREA_STYLE_COLOUR('',#285989); +#311577 = CURVE_STYLE('',#311578,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311579 = STYLED_ITEM('color',(#311580),#120453); +#311580 = PRESENTATION_STYLE_ASSIGNMENT((#311581,#311586)); +#311581 = SURFACE_STYLE_USAGE(.BOTH.,#311582); +#311582 = SURFACE_SIDE_STYLE('',(#311583)); +#311583 = SURFACE_STYLE_FILL_AREA(#311584); +#311584 = FILL_AREA_STYLE('',(#311585)); +#311585 = FILL_AREA_STYLE_COLOUR('',#285989); +#311586 = CURVE_STYLE('',#311587,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311588 = STYLED_ITEM('color',(#311589),#120470); +#311589 = PRESENTATION_STYLE_ASSIGNMENT((#311590,#311595)); +#311590 = SURFACE_STYLE_USAGE(.BOTH.,#311591); +#311591 = SURFACE_SIDE_STYLE('',(#311592)); +#311592 = SURFACE_STYLE_FILL_AREA(#311593); +#311593 = FILL_AREA_STYLE('',(#311594)); +#311594 = FILL_AREA_STYLE_COLOUR('',#285989); +#311595 = CURVE_STYLE('',#311596,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311597 = STYLED_ITEM('color',(#311598),#120487); +#311598 = PRESENTATION_STYLE_ASSIGNMENT((#311599,#311604)); +#311599 = SURFACE_STYLE_USAGE(.BOTH.,#311600); +#311600 = SURFACE_SIDE_STYLE('',(#311601)); +#311601 = SURFACE_STYLE_FILL_AREA(#311602); +#311602 = FILL_AREA_STYLE('',(#311603)); +#311603 = FILL_AREA_STYLE_COLOUR('',#285989); +#311604 = CURVE_STYLE('',#311605,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311606 = STYLED_ITEM('color',(#311607),#120504); +#311607 = PRESENTATION_STYLE_ASSIGNMENT((#311608,#311613)); +#311608 = SURFACE_STYLE_USAGE(.BOTH.,#311609); +#311609 = SURFACE_SIDE_STYLE('',(#311610)); +#311610 = SURFACE_STYLE_FILL_AREA(#311611); +#311611 = FILL_AREA_STYLE('',(#311612)); +#311612 = FILL_AREA_STYLE_COLOUR('',#285989); +#311613 = CURVE_STYLE('',#311614,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311615 = STYLED_ITEM('color',(#311616),#120516); +#311616 = PRESENTATION_STYLE_ASSIGNMENT((#311617,#311622)); +#311617 = SURFACE_STYLE_USAGE(.BOTH.,#311618); +#311618 = SURFACE_SIDE_STYLE('',(#311619)); +#311619 = SURFACE_STYLE_FILL_AREA(#311620); +#311620 = FILL_AREA_STYLE('',(#311621)); +#311621 = FILL_AREA_STYLE_COLOUR('',#285989); +#311622 = CURVE_STYLE('',#311623,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311624 = STYLED_ITEM('color',(#311625),#120533); +#311625 = PRESENTATION_STYLE_ASSIGNMENT((#311626,#311631)); +#311626 = SURFACE_STYLE_USAGE(.BOTH.,#311627); +#311627 = SURFACE_SIDE_STYLE('',(#311628)); +#311628 = SURFACE_STYLE_FILL_AREA(#311629); +#311629 = FILL_AREA_STYLE('',(#311630)); +#311630 = FILL_AREA_STYLE_COLOUR('',#285989); +#311631 = CURVE_STYLE('',#311632,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311633 = STYLED_ITEM('color',(#311634),#120550); +#311634 = PRESENTATION_STYLE_ASSIGNMENT((#311635,#311640)); +#311635 = SURFACE_STYLE_USAGE(.BOTH.,#311636); +#311636 = SURFACE_SIDE_STYLE('',(#311637)); +#311637 = SURFACE_STYLE_FILL_AREA(#311638); +#311638 = FILL_AREA_STYLE('',(#311639)); +#311639 = FILL_AREA_STYLE_COLOUR('',#285989); +#311640 = CURVE_STYLE('',#311641,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311642 = STYLED_ITEM('color',(#311643),#120567); +#311643 = PRESENTATION_STYLE_ASSIGNMENT((#311644,#311649)); +#311644 = SURFACE_STYLE_USAGE(.BOTH.,#311645); +#311645 = SURFACE_SIDE_STYLE('',(#311646)); +#311646 = SURFACE_STYLE_FILL_AREA(#311647); +#311647 = FILL_AREA_STYLE('',(#311648)); +#311648 = FILL_AREA_STYLE_COLOUR('',#285989); +#311649 = CURVE_STYLE('',#311650,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311651 = STYLED_ITEM('color',(#311652),#120584); +#311652 = PRESENTATION_STYLE_ASSIGNMENT((#311653,#311658)); +#311653 = SURFACE_STYLE_USAGE(.BOTH.,#311654); +#311654 = SURFACE_SIDE_STYLE('',(#311655)); +#311655 = SURFACE_STYLE_FILL_AREA(#311656); +#311656 = FILL_AREA_STYLE('',(#311657)); +#311657 = FILL_AREA_STYLE_COLOUR('',#285989); +#311658 = CURVE_STYLE('',#311659,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311660 = STYLED_ITEM('color',(#311661),#120596); +#311661 = PRESENTATION_STYLE_ASSIGNMENT((#311662,#311667)); +#311662 = SURFACE_STYLE_USAGE(.BOTH.,#311663); +#311663 = SURFACE_SIDE_STYLE('',(#311664)); +#311664 = SURFACE_STYLE_FILL_AREA(#311665); +#311665 = FILL_AREA_STYLE('',(#311666)); +#311666 = FILL_AREA_STYLE_COLOUR('',#285989); +#311667 = CURVE_STYLE('',#311668,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311669 = STYLED_ITEM('color',(#311670),#120613); +#311670 = PRESENTATION_STYLE_ASSIGNMENT((#311671,#311676)); +#311671 = SURFACE_STYLE_USAGE(.BOTH.,#311672); +#311672 = SURFACE_SIDE_STYLE('',(#311673)); +#311673 = SURFACE_STYLE_FILL_AREA(#311674); +#311674 = FILL_AREA_STYLE('',(#311675)); +#311675 = FILL_AREA_STYLE_COLOUR('',#285989); +#311676 = CURVE_STYLE('',#311677,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311678 = STYLED_ITEM('color',(#311679),#120630); +#311679 = PRESENTATION_STYLE_ASSIGNMENT((#311680,#311685)); +#311680 = SURFACE_STYLE_USAGE(.BOTH.,#311681); +#311681 = SURFACE_SIDE_STYLE('',(#311682)); +#311682 = SURFACE_STYLE_FILL_AREA(#311683); +#311683 = FILL_AREA_STYLE('',(#311684)); +#311684 = FILL_AREA_STYLE_COLOUR('',#285989); +#311685 = CURVE_STYLE('',#311686,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311687 = STYLED_ITEM('color',(#311688),#120647); +#311688 = PRESENTATION_STYLE_ASSIGNMENT((#311689,#311694)); +#311689 = SURFACE_STYLE_USAGE(.BOTH.,#311690); +#311690 = SURFACE_SIDE_STYLE('',(#311691)); +#311691 = SURFACE_STYLE_FILL_AREA(#311692); +#311692 = FILL_AREA_STYLE('',(#311693)); +#311693 = FILL_AREA_STYLE_COLOUR('',#285989); +#311694 = CURVE_STYLE('',#311695,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311696 = STYLED_ITEM('color',(#311697),#120664); +#311697 = PRESENTATION_STYLE_ASSIGNMENT((#311698,#311703)); +#311698 = SURFACE_STYLE_USAGE(.BOTH.,#311699); +#311699 = SURFACE_SIDE_STYLE('',(#311700)); +#311700 = SURFACE_STYLE_FILL_AREA(#311701); +#311701 = FILL_AREA_STYLE('',(#311702)); +#311702 = FILL_AREA_STYLE_COLOUR('',#285989); +#311703 = CURVE_STYLE('',#311704,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311705 = STYLED_ITEM('color',(#311706),#120676); +#311706 = PRESENTATION_STYLE_ASSIGNMENT((#311707,#311712)); +#311707 = SURFACE_STYLE_USAGE(.BOTH.,#311708); +#311708 = SURFACE_SIDE_STYLE('',(#311709)); +#311709 = SURFACE_STYLE_FILL_AREA(#311710); +#311710 = FILL_AREA_STYLE('',(#311711)); +#311711 = FILL_AREA_STYLE_COLOUR('',#285989); +#311712 = CURVE_STYLE('',#311713,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311714 = STYLED_ITEM('color',(#311715),#120693); +#311715 = PRESENTATION_STYLE_ASSIGNMENT((#311716,#311721)); +#311716 = SURFACE_STYLE_USAGE(.BOTH.,#311717); +#311717 = SURFACE_SIDE_STYLE('',(#311718)); +#311718 = SURFACE_STYLE_FILL_AREA(#311719); +#311719 = FILL_AREA_STYLE('',(#311720)); +#311720 = FILL_AREA_STYLE_COLOUR('',#285989); +#311721 = CURVE_STYLE('',#311722,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311723 = STYLED_ITEM('color',(#311724),#120710); +#311724 = PRESENTATION_STYLE_ASSIGNMENT((#311725,#311730)); +#311725 = SURFACE_STYLE_USAGE(.BOTH.,#311726); +#311726 = SURFACE_SIDE_STYLE('',(#311727)); +#311727 = SURFACE_STYLE_FILL_AREA(#311728); +#311728 = FILL_AREA_STYLE('',(#311729)); +#311729 = FILL_AREA_STYLE_COLOUR('',#285989); +#311730 = CURVE_STYLE('',#311731,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311732 = STYLED_ITEM('color',(#311733),#120727); +#311733 = PRESENTATION_STYLE_ASSIGNMENT((#311734,#311739)); +#311734 = SURFACE_STYLE_USAGE(.BOTH.,#311735); +#311735 = SURFACE_SIDE_STYLE('',(#311736)); +#311736 = SURFACE_STYLE_FILL_AREA(#311737); +#311737 = FILL_AREA_STYLE('',(#311738)); +#311738 = FILL_AREA_STYLE_COLOUR('',#285989); +#311739 = CURVE_STYLE('',#311740,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311741 = STYLED_ITEM('color',(#311742),#120744); +#311742 = PRESENTATION_STYLE_ASSIGNMENT((#311743,#311748)); +#311743 = SURFACE_STYLE_USAGE(.BOTH.,#311744); +#311744 = SURFACE_SIDE_STYLE('',(#311745)); +#311745 = SURFACE_STYLE_FILL_AREA(#311746); +#311746 = FILL_AREA_STYLE('',(#311747)); +#311747 = FILL_AREA_STYLE_COLOUR('',#285989); +#311748 = CURVE_STYLE('',#311749,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311750 = STYLED_ITEM('color',(#311751),#120756); +#311751 = PRESENTATION_STYLE_ASSIGNMENT((#311752,#311757)); +#311752 = SURFACE_STYLE_USAGE(.BOTH.,#311753); +#311753 = SURFACE_SIDE_STYLE('',(#311754)); +#311754 = SURFACE_STYLE_FILL_AREA(#311755); +#311755 = FILL_AREA_STYLE('',(#311756)); +#311756 = FILL_AREA_STYLE_COLOUR('',#285989); +#311757 = CURVE_STYLE('',#311758,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311759 = STYLED_ITEM('color',(#311760),#120773); +#311760 = PRESENTATION_STYLE_ASSIGNMENT((#311761,#311766)); +#311761 = SURFACE_STYLE_USAGE(.BOTH.,#311762); +#311762 = SURFACE_SIDE_STYLE('',(#311763)); +#311763 = SURFACE_STYLE_FILL_AREA(#311764); +#311764 = FILL_AREA_STYLE('',(#311765)); +#311765 = FILL_AREA_STYLE_COLOUR('',#285989); +#311766 = CURVE_STYLE('',#311767,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311768 = STYLED_ITEM('color',(#311769),#120790); +#311769 = PRESENTATION_STYLE_ASSIGNMENT((#311770,#311775)); +#311770 = SURFACE_STYLE_USAGE(.BOTH.,#311771); +#311771 = SURFACE_SIDE_STYLE('',(#311772)); +#311772 = SURFACE_STYLE_FILL_AREA(#311773); +#311773 = FILL_AREA_STYLE('',(#311774)); +#311774 = FILL_AREA_STYLE_COLOUR('',#285989); +#311775 = CURVE_STYLE('',#311776,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311777 = STYLED_ITEM('color',(#311778),#120807); +#311778 = PRESENTATION_STYLE_ASSIGNMENT((#311779,#311784)); +#311779 = SURFACE_STYLE_USAGE(.BOTH.,#311780); +#311780 = SURFACE_SIDE_STYLE('',(#311781)); +#311781 = SURFACE_STYLE_FILL_AREA(#311782); +#311782 = FILL_AREA_STYLE('',(#311783)); +#311783 = FILL_AREA_STYLE_COLOUR('',#285989); +#311784 = CURVE_STYLE('',#311785,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311786 = STYLED_ITEM('color',(#311787),#120824); +#311787 = PRESENTATION_STYLE_ASSIGNMENT((#311788,#311793)); +#311788 = SURFACE_STYLE_USAGE(.BOTH.,#311789); +#311789 = SURFACE_SIDE_STYLE('',(#311790)); +#311790 = SURFACE_STYLE_FILL_AREA(#311791); +#311791 = FILL_AREA_STYLE('',(#311792)); +#311792 = FILL_AREA_STYLE_COLOUR('',#285989); +#311793 = CURVE_STYLE('',#311794,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311795 = STYLED_ITEM('color',(#311796),#120836); +#311796 = PRESENTATION_STYLE_ASSIGNMENT((#311797,#311802)); +#311797 = SURFACE_STYLE_USAGE(.BOTH.,#311798); +#311798 = SURFACE_SIDE_STYLE('',(#311799)); +#311799 = SURFACE_STYLE_FILL_AREA(#311800); +#311800 = FILL_AREA_STYLE('',(#311801)); +#311801 = FILL_AREA_STYLE_COLOUR('',#285989); +#311802 = CURVE_STYLE('',#311803,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311804 = STYLED_ITEM('color',(#311805),#120853); +#311805 = PRESENTATION_STYLE_ASSIGNMENT((#311806,#311811)); +#311806 = SURFACE_STYLE_USAGE(.BOTH.,#311807); +#311807 = SURFACE_SIDE_STYLE('',(#311808)); +#311808 = SURFACE_STYLE_FILL_AREA(#311809); +#311809 = FILL_AREA_STYLE('',(#311810)); +#311810 = FILL_AREA_STYLE_COLOUR('',#285989); +#311811 = CURVE_STYLE('',#311812,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311813 = STYLED_ITEM('color',(#311814),#120870); +#311814 = PRESENTATION_STYLE_ASSIGNMENT((#311815,#311820)); +#311815 = SURFACE_STYLE_USAGE(.BOTH.,#311816); +#311816 = SURFACE_SIDE_STYLE('',(#311817)); +#311817 = SURFACE_STYLE_FILL_AREA(#311818); +#311818 = FILL_AREA_STYLE('',(#311819)); +#311819 = FILL_AREA_STYLE_COLOUR('',#285989); +#311820 = CURVE_STYLE('',#311821,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311822 = STYLED_ITEM('color',(#311823),#120887); +#311823 = PRESENTATION_STYLE_ASSIGNMENT((#311824,#311829)); +#311824 = SURFACE_STYLE_USAGE(.BOTH.,#311825); +#311825 = SURFACE_SIDE_STYLE('',(#311826)); +#311826 = SURFACE_STYLE_FILL_AREA(#311827); +#311827 = FILL_AREA_STYLE('',(#311828)); +#311828 = FILL_AREA_STYLE_COLOUR('',#285989); +#311829 = CURVE_STYLE('',#311830,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311831 = STYLED_ITEM('color',(#311832),#120904); +#311832 = PRESENTATION_STYLE_ASSIGNMENT((#311833,#311838)); +#311833 = SURFACE_STYLE_USAGE(.BOTH.,#311834); +#311834 = SURFACE_SIDE_STYLE('',(#311835)); +#311835 = SURFACE_STYLE_FILL_AREA(#311836); +#311836 = FILL_AREA_STYLE('',(#311837)); +#311837 = FILL_AREA_STYLE_COLOUR('',#285989); +#311838 = CURVE_STYLE('',#311839,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311840 = STYLED_ITEM('color',(#311841),#120916); +#311841 = PRESENTATION_STYLE_ASSIGNMENT((#311842,#311847)); +#311842 = SURFACE_STYLE_USAGE(.BOTH.,#311843); +#311843 = SURFACE_SIDE_STYLE('',(#311844)); +#311844 = SURFACE_STYLE_FILL_AREA(#311845); +#311845 = FILL_AREA_STYLE('',(#311846)); +#311846 = FILL_AREA_STYLE_COLOUR('',#270350); +#311847 = CURVE_STYLE('',#311848,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311849 = OVER_RIDING_STYLED_ITEM('overriding color',(#311850),#120923, + #311840); +#311850 = PRESENTATION_STYLE_ASSIGNMENT((#311851,#311856)); +#311851 = SURFACE_STYLE_USAGE(.BOTH.,#311852); +#311852 = SURFACE_SIDE_STYLE('',(#311853)); +#311853 = SURFACE_STYLE_FILL_AREA(#311854); +#311854 = FILL_AREA_STYLE('',(#311855)); +#311855 = FILL_AREA_STYLE_COLOUR('',#285989); +#311856 = CURVE_STYLE('',#311857,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311858 = STYLED_ITEM('color',(#311859),#120933); +#311859 = PRESENTATION_STYLE_ASSIGNMENT((#311860,#311865)); +#311860 = SURFACE_STYLE_USAGE(.BOTH.,#311861); +#311861 = SURFACE_SIDE_STYLE('',(#311862)); +#311862 = SURFACE_STYLE_FILL_AREA(#311863); +#311863 = FILL_AREA_STYLE('',(#311864)); +#311864 = FILL_AREA_STYLE_COLOUR('',#270350); +#311865 = CURVE_STYLE('',#311866,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311867 = OVER_RIDING_STYLED_ITEM('overriding color',(#311868),#120938, + #311858); +#311868 = PRESENTATION_STYLE_ASSIGNMENT((#311869,#311874)); +#311869 = SURFACE_STYLE_USAGE(.BOTH.,#311870); +#311870 = SURFACE_SIDE_STYLE('',(#311871)); +#311871 = SURFACE_STYLE_FILL_AREA(#311872); +#311872 = FILL_AREA_STYLE('',(#311873)); +#311873 = FILL_AREA_STYLE_COLOUR('',#285989); +#311874 = CURVE_STYLE('',#311875,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311876 = STYLED_ITEM('color',(#311877),#120950); +#311877 = PRESENTATION_STYLE_ASSIGNMENT((#311878,#311883)); +#311878 = SURFACE_STYLE_USAGE(.BOTH.,#311879); +#311879 = SURFACE_SIDE_STYLE('',(#311880)); +#311880 = SURFACE_STYLE_FILL_AREA(#311881); +#311881 = FILL_AREA_STYLE('',(#311882)); +#311882 = FILL_AREA_STYLE_COLOUR('',#285989); +#311883 = CURVE_STYLE('',#311884,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311885 = STYLED_ITEM('color',(#311886),#120999); +#311886 = PRESENTATION_STYLE_ASSIGNMENT((#311887,#311892)); +#311887 = SURFACE_STYLE_USAGE(.BOTH.,#311888); +#311888 = SURFACE_SIDE_STYLE('',(#311889)); +#311889 = SURFACE_STYLE_FILL_AREA(#311890); +#311890 = FILL_AREA_STYLE('',(#311891)); +#311891 = FILL_AREA_STYLE_COLOUR('',#285989); +#311892 = CURVE_STYLE('',#311893,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311894 = STYLED_ITEM('color',(#311895),#121023); +#311895 = PRESENTATION_STYLE_ASSIGNMENT((#311896,#311901)); +#311896 = SURFACE_STYLE_USAGE(.BOTH.,#311897); +#311897 = SURFACE_SIDE_STYLE('',(#311898)); +#311898 = SURFACE_STYLE_FILL_AREA(#311899); +#311899 = FILL_AREA_STYLE('',(#311900)); +#311900 = FILL_AREA_STYLE_COLOUR('',#285989); +#311901 = CURVE_STYLE('',#311902,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311903 = STYLED_ITEM('color',(#311904),#121065); +#311904 = PRESENTATION_STYLE_ASSIGNMENT((#311905,#311910)); +#311905 = SURFACE_STYLE_USAGE(.BOTH.,#311906); +#311906 = SURFACE_SIDE_STYLE('',(#311907)); +#311907 = SURFACE_STYLE_FILL_AREA(#311908); +#311908 = FILL_AREA_STYLE('',(#311909)); +#311909 = FILL_AREA_STYLE_COLOUR('',#285989); +#311910 = CURVE_STYLE('',#311911,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311912 = STYLED_ITEM('color',(#311913),#121082); +#311913 = PRESENTATION_STYLE_ASSIGNMENT((#311914,#311919)); +#311914 = SURFACE_STYLE_USAGE(.BOTH.,#311915); +#311915 = SURFACE_SIDE_STYLE('',(#311916)); +#311916 = SURFACE_STYLE_FILL_AREA(#311917); +#311917 = FILL_AREA_STYLE('',(#311918)); +#311918 = FILL_AREA_STYLE_COLOUR('',#270350); +#311919 = CURVE_STYLE('',#311920,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311921 = OVER_RIDING_STYLED_ITEM('overriding color',(#311922),#121089, + #311912); +#311922 = PRESENTATION_STYLE_ASSIGNMENT((#311923,#311928)); +#311923 = SURFACE_STYLE_USAGE(.BOTH.,#311924); +#311924 = SURFACE_SIDE_STYLE('',(#311925)); +#311925 = SURFACE_STYLE_FILL_AREA(#311926); +#311926 = FILL_AREA_STYLE('',(#311927)); +#311927 = FILL_AREA_STYLE_COLOUR('',#285989); +#311928 = CURVE_STYLE('',#311929,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311930 = STYLED_ITEM('color',(#311931),#121099); +#311931 = PRESENTATION_STYLE_ASSIGNMENT((#311932,#311937)); +#311932 = SURFACE_STYLE_USAGE(.BOTH.,#311933); +#311933 = SURFACE_SIDE_STYLE('',(#311934)); +#311934 = SURFACE_STYLE_FILL_AREA(#311935); +#311935 = FILL_AREA_STYLE('',(#311936)); +#311936 = FILL_AREA_STYLE_COLOUR('',#270350); +#311937 = CURVE_STYLE('',#311938,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311939 = OVER_RIDING_STYLED_ITEM('overriding color',(#311940),#121104, + #311930); +#311940 = PRESENTATION_STYLE_ASSIGNMENT((#311941,#311946)); +#311941 = SURFACE_STYLE_USAGE(.BOTH.,#311942); +#311942 = SURFACE_SIDE_STYLE('',(#311943)); +#311943 = SURFACE_STYLE_FILL_AREA(#311944); +#311944 = FILL_AREA_STYLE('',(#311945)); +#311945 = FILL_AREA_STYLE_COLOUR('',#285989); +#311946 = CURVE_STYLE('',#311947,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311948 = STYLED_ITEM('color',(#311949),#121116); +#311949 = PRESENTATION_STYLE_ASSIGNMENT((#311950,#311955)); +#311950 = SURFACE_STYLE_USAGE(.BOTH.,#311951); +#311951 = SURFACE_SIDE_STYLE('',(#311952)); +#311952 = SURFACE_STYLE_FILL_AREA(#311953); +#311953 = FILL_AREA_STYLE('',(#311954)); +#311954 = FILL_AREA_STYLE_COLOUR('',#285989); +#311955 = CURVE_STYLE('',#311956,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311957 = STYLED_ITEM('color',(#311958),#121165); +#311958 = PRESENTATION_STYLE_ASSIGNMENT((#311959,#311964)); +#311959 = SURFACE_STYLE_USAGE(.BOTH.,#311960); +#311960 = SURFACE_SIDE_STYLE('',(#311961)); +#311961 = SURFACE_STYLE_FILL_AREA(#311962); +#311962 = FILL_AREA_STYLE('',(#311963)); +#311963 = FILL_AREA_STYLE_COLOUR('',#285989); +#311964 = CURVE_STYLE('',#311965,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311966 = STYLED_ITEM('color',(#311967),#121189); +#311967 = PRESENTATION_STYLE_ASSIGNMENT((#311968,#311973)); +#311968 = SURFACE_STYLE_USAGE(.BOTH.,#311969); +#311969 = SURFACE_SIDE_STYLE('',(#311970)); +#311970 = SURFACE_STYLE_FILL_AREA(#311971); +#311971 = FILL_AREA_STYLE('',(#311972)); +#311972 = FILL_AREA_STYLE_COLOUR('',#285989); +#311973 = CURVE_STYLE('',#311974,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311975 = STYLED_ITEM('color',(#311976),#121231); +#311976 = PRESENTATION_STYLE_ASSIGNMENT((#311977,#311982)); +#311977 = SURFACE_STYLE_USAGE(.BOTH.,#311978); +#311978 = SURFACE_SIDE_STYLE('',(#311979)); +#311979 = SURFACE_STYLE_FILL_AREA(#311980); +#311980 = FILL_AREA_STYLE('',(#311981)); +#311981 = FILL_AREA_STYLE_COLOUR('',#285989); +#311982 = CURVE_STYLE('',#311983,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#311983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311984 = STYLED_ITEM('color',(#311985),#121248); +#311985 = PRESENTATION_STYLE_ASSIGNMENT((#311986,#311991)); +#311986 = SURFACE_STYLE_USAGE(.BOTH.,#311987); +#311987 = SURFACE_SIDE_STYLE('',(#311988)); +#311988 = SURFACE_STYLE_FILL_AREA(#311989); +#311989 = FILL_AREA_STYLE('',(#311990)); +#311990 = FILL_AREA_STYLE_COLOUR('',#270350); +#311991 = CURVE_STYLE('',#311992,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#311992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#311993 = OVER_RIDING_STYLED_ITEM('overriding color',(#311994),#121255, + #311984); +#311994 = PRESENTATION_STYLE_ASSIGNMENT((#311995,#312000)); +#311995 = SURFACE_STYLE_USAGE(.BOTH.,#311996); +#311996 = SURFACE_SIDE_STYLE('',(#311997)); +#311997 = SURFACE_STYLE_FILL_AREA(#311998); +#311998 = FILL_AREA_STYLE('',(#311999)); +#311999 = FILL_AREA_STYLE_COLOUR('',#285989); +#312000 = CURVE_STYLE('',#312001,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312002 = STYLED_ITEM('color',(#312003),#121265); +#312003 = PRESENTATION_STYLE_ASSIGNMENT((#312004,#312009)); +#312004 = SURFACE_STYLE_USAGE(.BOTH.,#312005); +#312005 = SURFACE_SIDE_STYLE('',(#312006)); +#312006 = SURFACE_STYLE_FILL_AREA(#312007); +#312007 = FILL_AREA_STYLE('',(#312008)); +#312008 = FILL_AREA_STYLE_COLOUR('',#270350); +#312009 = CURVE_STYLE('',#312010,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312011 = OVER_RIDING_STYLED_ITEM('overriding color',(#312012),#121270, + #312002); +#312012 = PRESENTATION_STYLE_ASSIGNMENT((#312013,#312018)); +#312013 = SURFACE_STYLE_USAGE(.BOTH.,#312014); +#312014 = SURFACE_SIDE_STYLE('',(#312015)); +#312015 = SURFACE_STYLE_FILL_AREA(#312016); +#312016 = FILL_AREA_STYLE('',(#312017)); +#312017 = FILL_AREA_STYLE_COLOUR('',#285989); +#312018 = CURVE_STYLE('',#312019,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312020 = STYLED_ITEM('color',(#312021),#121282); +#312021 = PRESENTATION_STYLE_ASSIGNMENT((#312022,#312027)); +#312022 = SURFACE_STYLE_USAGE(.BOTH.,#312023); +#312023 = SURFACE_SIDE_STYLE('',(#312024)); +#312024 = SURFACE_STYLE_FILL_AREA(#312025); +#312025 = FILL_AREA_STYLE('',(#312026)); +#312026 = FILL_AREA_STYLE_COLOUR('',#285989); +#312027 = CURVE_STYLE('',#312028,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312029 = STYLED_ITEM('color',(#312030),#121331); +#312030 = PRESENTATION_STYLE_ASSIGNMENT((#312031,#312036)); +#312031 = SURFACE_STYLE_USAGE(.BOTH.,#312032); +#312032 = SURFACE_SIDE_STYLE('',(#312033)); +#312033 = SURFACE_STYLE_FILL_AREA(#312034); +#312034 = FILL_AREA_STYLE('',(#312035)); +#312035 = FILL_AREA_STYLE_COLOUR('',#285989); +#312036 = CURVE_STYLE('',#312037,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312038 = STYLED_ITEM('color',(#312039),#121355); +#312039 = PRESENTATION_STYLE_ASSIGNMENT((#312040,#312045)); +#312040 = SURFACE_STYLE_USAGE(.BOTH.,#312041); +#312041 = SURFACE_SIDE_STYLE('',(#312042)); +#312042 = SURFACE_STYLE_FILL_AREA(#312043); +#312043 = FILL_AREA_STYLE('',(#312044)); +#312044 = FILL_AREA_STYLE_COLOUR('',#285989); +#312045 = CURVE_STYLE('',#312046,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312047 = STYLED_ITEM('color',(#312048),#121397); +#312048 = PRESENTATION_STYLE_ASSIGNMENT((#312049,#312054)); +#312049 = SURFACE_STYLE_USAGE(.BOTH.,#312050); +#312050 = SURFACE_SIDE_STYLE('',(#312051)); +#312051 = SURFACE_STYLE_FILL_AREA(#312052); +#312052 = FILL_AREA_STYLE('',(#312053)); +#312053 = FILL_AREA_STYLE_COLOUR('',#285989); +#312054 = CURVE_STYLE('',#312055,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312056 = STYLED_ITEM('color',(#312057),#121414); +#312057 = PRESENTATION_STYLE_ASSIGNMENT((#312058,#312063)); +#312058 = SURFACE_STYLE_USAGE(.BOTH.,#312059); +#312059 = SURFACE_SIDE_STYLE('',(#312060)); +#312060 = SURFACE_STYLE_FILL_AREA(#312061); +#312061 = FILL_AREA_STYLE('',(#312062)); +#312062 = FILL_AREA_STYLE_COLOUR('',#270350); +#312063 = CURVE_STYLE('',#312064,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312065 = OVER_RIDING_STYLED_ITEM('overriding color',(#312066),#121421, + #312056); +#312066 = PRESENTATION_STYLE_ASSIGNMENT((#312067,#312072)); +#312067 = SURFACE_STYLE_USAGE(.BOTH.,#312068); +#312068 = SURFACE_SIDE_STYLE('',(#312069)); +#312069 = SURFACE_STYLE_FILL_AREA(#312070); +#312070 = FILL_AREA_STYLE('',(#312071)); +#312071 = FILL_AREA_STYLE_COLOUR('',#285989); +#312072 = CURVE_STYLE('',#312073,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312074 = STYLED_ITEM('color',(#312075),#121431); +#312075 = PRESENTATION_STYLE_ASSIGNMENT((#312076,#312081)); +#312076 = SURFACE_STYLE_USAGE(.BOTH.,#312077); +#312077 = SURFACE_SIDE_STYLE('',(#312078)); +#312078 = SURFACE_STYLE_FILL_AREA(#312079); +#312079 = FILL_AREA_STYLE('',(#312080)); +#312080 = FILL_AREA_STYLE_COLOUR('',#270350); +#312081 = CURVE_STYLE('',#312082,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312083 = OVER_RIDING_STYLED_ITEM('overriding color',(#312084),#121436, + #312074); +#312084 = PRESENTATION_STYLE_ASSIGNMENT((#312085,#312090)); +#312085 = SURFACE_STYLE_USAGE(.BOTH.,#312086); +#312086 = SURFACE_SIDE_STYLE('',(#312087)); +#312087 = SURFACE_STYLE_FILL_AREA(#312088); +#312088 = FILL_AREA_STYLE('',(#312089)); +#312089 = FILL_AREA_STYLE_COLOUR('',#285989); +#312090 = CURVE_STYLE('',#312091,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312092 = STYLED_ITEM('color',(#312093),#121448); +#312093 = PRESENTATION_STYLE_ASSIGNMENT((#312094,#312099)); +#312094 = SURFACE_STYLE_USAGE(.BOTH.,#312095); +#312095 = SURFACE_SIDE_STYLE('',(#312096)); +#312096 = SURFACE_STYLE_FILL_AREA(#312097); +#312097 = FILL_AREA_STYLE('',(#312098)); +#312098 = FILL_AREA_STYLE_COLOUR('',#285989); +#312099 = CURVE_STYLE('',#312100,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312101 = STYLED_ITEM('color',(#312102),#121497); +#312102 = PRESENTATION_STYLE_ASSIGNMENT((#312103,#312108)); +#312103 = SURFACE_STYLE_USAGE(.BOTH.,#312104); +#312104 = SURFACE_SIDE_STYLE('',(#312105)); +#312105 = SURFACE_STYLE_FILL_AREA(#312106); +#312106 = FILL_AREA_STYLE('',(#312107)); +#312107 = FILL_AREA_STYLE_COLOUR('',#285989); +#312108 = CURVE_STYLE('',#312109,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312110 = STYLED_ITEM('color',(#312111),#121521); +#312111 = PRESENTATION_STYLE_ASSIGNMENT((#312112,#312117)); +#312112 = SURFACE_STYLE_USAGE(.BOTH.,#312113); +#312113 = SURFACE_SIDE_STYLE('',(#312114)); +#312114 = SURFACE_STYLE_FILL_AREA(#312115); +#312115 = FILL_AREA_STYLE('',(#312116)); +#312116 = FILL_AREA_STYLE_COLOUR('',#285989); +#312117 = CURVE_STYLE('',#312118,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312119 = STYLED_ITEM('color',(#312120),#121563); +#312120 = PRESENTATION_STYLE_ASSIGNMENT((#312121,#312126)); +#312121 = SURFACE_STYLE_USAGE(.BOTH.,#312122); +#312122 = SURFACE_SIDE_STYLE('',(#312123)); +#312123 = SURFACE_STYLE_FILL_AREA(#312124); +#312124 = FILL_AREA_STYLE('',(#312125)); +#312125 = FILL_AREA_STYLE_COLOUR('',#285989); +#312126 = CURVE_STYLE('',#312127,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312128 = STYLED_ITEM('color',(#312129),#121580); +#312129 = PRESENTATION_STYLE_ASSIGNMENT((#312130,#312135)); +#312130 = SURFACE_STYLE_USAGE(.BOTH.,#312131); +#312131 = SURFACE_SIDE_STYLE('',(#312132)); +#312132 = SURFACE_STYLE_FILL_AREA(#312133); +#312133 = FILL_AREA_STYLE('',(#312134)); +#312134 = FILL_AREA_STYLE_COLOUR('',#270350); +#312135 = CURVE_STYLE('',#312136,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312137 = OVER_RIDING_STYLED_ITEM('overriding color',(#312138),#121587, + #312128); +#312138 = PRESENTATION_STYLE_ASSIGNMENT((#312139,#312144)); +#312139 = SURFACE_STYLE_USAGE(.BOTH.,#312140); +#312140 = SURFACE_SIDE_STYLE('',(#312141)); +#312141 = SURFACE_STYLE_FILL_AREA(#312142); +#312142 = FILL_AREA_STYLE('',(#312143)); +#312143 = FILL_AREA_STYLE_COLOUR('',#285989); +#312144 = CURVE_STYLE('',#312145,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312146 = STYLED_ITEM('color',(#312147),#121597); +#312147 = PRESENTATION_STYLE_ASSIGNMENT((#312148,#312153)); +#312148 = SURFACE_STYLE_USAGE(.BOTH.,#312149); +#312149 = SURFACE_SIDE_STYLE('',(#312150)); +#312150 = SURFACE_STYLE_FILL_AREA(#312151); +#312151 = FILL_AREA_STYLE('',(#312152)); +#312152 = FILL_AREA_STYLE_COLOUR('',#270350); +#312153 = CURVE_STYLE('',#312154,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312155 = OVER_RIDING_STYLED_ITEM('overriding color',(#312156),#121602, + #312146); +#312156 = PRESENTATION_STYLE_ASSIGNMENT((#312157,#312162)); +#312157 = SURFACE_STYLE_USAGE(.BOTH.,#312158); +#312158 = SURFACE_SIDE_STYLE('',(#312159)); +#312159 = SURFACE_STYLE_FILL_AREA(#312160); +#312160 = FILL_AREA_STYLE('',(#312161)); +#312161 = FILL_AREA_STYLE_COLOUR('',#285989); +#312162 = CURVE_STYLE('',#312163,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312164 = STYLED_ITEM('color',(#312165),#121614); +#312165 = PRESENTATION_STYLE_ASSIGNMENT((#312166,#312171)); +#312166 = SURFACE_STYLE_USAGE(.BOTH.,#312167); +#312167 = SURFACE_SIDE_STYLE('',(#312168)); +#312168 = SURFACE_STYLE_FILL_AREA(#312169); +#312169 = FILL_AREA_STYLE('',(#312170)); +#312170 = FILL_AREA_STYLE_COLOUR('',#285989); +#312171 = CURVE_STYLE('',#312172,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312173 = STYLED_ITEM('color',(#312174),#121663); +#312174 = PRESENTATION_STYLE_ASSIGNMENT((#312175,#312180)); +#312175 = SURFACE_STYLE_USAGE(.BOTH.,#312176); +#312176 = SURFACE_SIDE_STYLE('',(#312177)); +#312177 = SURFACE_STYLE_FILL_AREA(#312178); +#312178 = FILL_AREA_STYLE('',(#312179)); +#312179 = FILL_AREA_STYLE_COLOUR('',#285989); +#312180 = CURVE_STYLE('',#312181,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312182 = STYLED_ITEM('color',(#312183),#121687); +#312183 = PRESENTATION_STYLE_ASSIGNMENT((#312184,#312189)); +#312184 = SURFACE_STYLE_USAGE(.BOTH.,#312185); +#312185 = SURFACE_SIDE_STYLE('',(#312186)); +#312186 = SURFACE_STYLE_FILL_AREA(#312187); +#312187 = FILL_AREA_STYLE('',(#312188)); +#312188 = FILL_AREA_STYLE_COLOUR('',#285989); +#312189 = CURVE_STYLE('',#312190,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312191 = STYLED_ITEM('color',(#312192),#121729); +#312192 = PRESENTATION_STYLE_ASSIGNMENT((#312193,#312198)); +#312193 = SURFACE_STYLE_USAGE(.BOTH.,#312194); +#312194 = SURFACE_SIDE_STYLE('',(#312195)); +#312195 = SURFACE_STYLE_FILL_AREA(#312196); +#312196 = FILL_AREA_STYLE('',(#312197)); +#312197 = FILL_AREA_STYLE_COLOUR('',#285989); +#312198 = CURVE_STYLE('',#312199,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312200 = STYLED_ITEM('color',(#312201),#121746); +#312201 = PRESENTATION_STYLE_ASSIGNMENT((#312202,#312207)); +#312202 = SURFACE_STYLE_USAGE(.BOTH.,#312203); +#312203 = SURFACE_SIDE_STYLE('',(#312204)); +#312204 = SURFACE_STYLE_FILL_AREA(#312205); +#312205 = FILL_AREA_STYLE('',(#312206)); +#312206 = FILL_AREA_STYLE_COLOUR('',#270350); +#312207 = CURVE_STYLE('',#312208,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312209 = OVER_RIDING_STYLED_ITEM('overriding color',(#312210),#121753, + #312200); +#312210 = PRESENTATION_STYLE_ASSIGNMENT((#312211,#312216)); +#312211 = SURFACE_STYLE_USAGE(.BOTH.,#312212); +#312212 = SURFACE_SIDE_STYLE('',(#312213)); +#312213 = SURFACE_STYLE_FILL_AREA(#312214); +#312214 = FILL_AREA_STYLE('',(#312215)); +#312215 = FILL_AREA_STYLE_COLOUR('',#285989); +#312216 = CURVE_STYLE('',#312217,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312218 = STYLED_ITEM('color',(#312219),#121763); +#312219 = PRESENTATION_STYLE_ASSIGNMENT((#312220,#312225)); +#312220 = SURFACE_STYLE_USAGE(.BOTH.,#312221); +#312221 = SURFACE_SIDE_STYLE('',(#312222)); +#312222 = SURFACE_STYLE_FILL_AREA(#312223); +#312223 = FILL_AREA_STYLE('',(#312224)); +#312224 = FILL_AREA_STYLE_COLOUR('',#270350); +#312225 = CURVE_STYLE('',#312226,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312227 = OVER_RIDING_STYLED_ITEM('overriding color',(#312228),#121768, + #312218); +#312228 = PRESENTATION_STYLE_ASSIGNMENT((#312229,#312234)); +#312229 = SURFACE_STYLE_USAGE(.BOTH.,#312230); +#312230 = SURFACE_SIDE_STYLE('',(#312231)); +#312231 = SURFACE_STYLE_FILL_AREA(#312232); +#312232 = FILL_AREA_STYLE('',(#312233)); +#312233 = FILL_AREA_STYLE_COLOUR('',#285989); +#312234 = CURVE_STYLE('',#312235,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312236 = STYLED_ITEM('color',(#312237),#121780); +#312237 = PRESENTATION_STYLE_ASSIGNMENT((#312238,#312243)); +#312238 = SURFACE_STYLE_USAGE(.BOTH.,#312239); +#312239 = SURFACE_SIDE_STYLE('',(#312240)); +#312240 = SURFACE_STYLE_FILL_AREA(#312241); +#312241 = FILL_AREA_STYLE('',(#312242)); +#312242 = FILL_AREA_STYLE_COLOUR('',#285989); +#312243 = CURVE_STYLE('',#312244,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312245 = STYLED_ITEM('color',(#312246),#121829); +#312246 = PRESENTATION_STYLE_ASSIGNMENT((#312247,#312252)); +#312247 = SURFACE_STYLE_USAGE(.BOTH.,#312248); +#312248 = SURFACE_SIDE_STYLE('',(#312249)); +#312249 = SURFACE_STYLE_FILL_AREA(#312250); +#312250 = FILL_AREA_STYLE('',(#312251)); +#312251 = FILL_AREA_STYLE_COLOUR('',#285989); +#312252 = CURVE_STYLE('',#312253,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312254 = STYLED_ITEM('color',(#312255),#121853); +#312255 = PRESENTATION_STYLE_ASSIGNMENT((#312256,#312261)); +#312256 = SURFACE_STYLE_USAGE(.BOTH.,#312257); +#312257 = SURFACE_SIDE_STYLE('',(#312258)); +#312258 = SURFACE_STYLE_FILL_AREA(#312259); +#312259 = FILL_AREA_STYLE('',(#312260)); +#312260 = FILL_AREA_STYLE_COLOUR('',#285989); +#312261 = CURVE_STYLE('',#312262,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312263 = STYLED_ITEM('color',(#312264),#121895); +#312264 = PRESENTATION_STYLE_ASSIGNMENT((#312265,#312270)); +#312265 = SURFACE_STYLE_USAGE(.BOTH.,#312266); +#312266 = SURFACE_SIDE_STYLE('',(#312267)); +#312267 = SURFACE_STYLE_FILL_AREA(#312268); +#312268 = FILL_AREA_STYLE('',(#312269)); +#312269 = FILL_AREA_STYLE_COLOUR('',#285989); +#312270 = CURVE_STYLE('',#312271,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312272 = STYLED_ITEM('color',(#312273),#121912); +#312273 = PRESENTATION_STYLE_ASSIGNMENT((#312274,#312279)); +#312274 = SURFACE_STYLE_USAGE(.BOTH.,#312275); +#312275 = SURFACE_SIDE_STYLE('',(#312276)); +#312276 = SURFACE_STYLE_FILL_AREA(#312277); +#312277 = FILL_AREA_STYLE('',(#312278)); +#312278 = FILL_AREA_STYLE_COLOUR('',#270350); +#312279 = CURVE_STYLE('',#312280,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312281 = OVER_RIDING_STYLED_ITEM('overriding color',(#312282),#121919, + #312272); +#312282 = PRESENTATION_STYLE_ASSIGNMENT((#312283,#312288)); +#312283 = SURFACE_STYLE_USAGE(.BOTH.,#312284); +#312284 = SURFACE_SIDE_STYLE('',(#312285)); +#312285 = SURFACE_STYLE_FILL_AREA(#312286); +#312286 = FILL_AREA_STYLE('',(#312287)); +#312287 = FILL_AREA_STYLE_COLOUR('',#285989); +#312288 = CURVE_STYLE('',#312289,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312290 = STYLED_ITEM('color',(#312291),#121929); +#312291 = PRESENTATION_STYLE_ASSIGNMENT((#312292,#312297)); +#312292 = SURFACE_STYLE_USAGE(.BOTH.,#312293); +#312293 = SURFACE_SIDE_STYLE('',(#312294)); +#312294 = SURFACE_STYLE_FILL_AREA(#312295); +#312295 = FILL_AREA_STYLE('',(#312296)); +#312296 = FILL_AREA_STYLE_COLOUR('',#270350); +#312297 = CURVE_STYLE('',#312298,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312299 = OVER_RIDING_STYLED_ITEM('overriding color',(#312300),#121934, + #312290); +#312300 = PRESENTATION_STYLE_ASSIGNMENT((#312301,#312306)); +#312301 = SURFACE_STYLE_USAGE(.BOTH.,#312302); +#312302 = SURFACE_SIDE_STYLE('',(#312303)); +#312303 = SURFACE_STYLE_FILL_AREA(#312304); +#312304 = FILL_AREA_STYLE('',(#312305)); +#312305 = FILL_AREA_STYLE_COLOUR('',#285989); +#312306 = CURVE_STYLE('',#312307,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312308 = STYLED_ITEM('color',(#312309),#121946); +#312309 = PRESENTATION_STYLE_ASSIGNMENT((#312310,#312315)); +#312310 = SURFACE_STYLE_USAGE(.BOTH.,#312311); +#312311 = SURFACE_SIDE_STYLE('',(#312312)); +#312312 = SURFACE_STYLE_FILL_AREA(#312313); +#312313 = FILL_AREA_STYLE('',(#312314)); +#312314 = FILL_AREA_STYLE_COLOUR('',#285989); +#312315 = CURVE_STYLE('',#312316,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312317 = STYLED_ITEM('color',(#312318),#121995); +#312318 = PRESENTATION_STYLE_ASSIGNMENT((#312319,#312324)); +#312319 = SURFACE_STYLE_USAGE(.BOTH.,#312320); +#312320 = SURFACE_SIDE_STYLE('',(#312321)); +#312321 = SURFACE_STYLE_FILL_AREA(#312322); +#312322 = FILL_AREA_STYLE('',(#312323)); +#312323 = FILL_AREA_STYLE_COLOUR('',#285989); +#312324 = CURVE_STYLE('',#312325,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312326 = STYLED_ITEM('color',(#312327),#122019); +#312327 = PRESENTATION_STYLE_ASSIGNMENT((#312328,#312333)); +#312328 = SURFACE_STYLE_USAGE(.BOTH.,#312329); +#312329 = SURFACE_SIDE_STYLE('',(#312330)); +#312330 = SURFACE_STYLE_FILL_AREA(#312331); +#312331 = FILL_AREA_STYLE('',(#312332)); +#312332 = FILL_AREA_STYLE_COLOUR('',#285989); +#312333 = CURVE_STYLE('',#312334,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312335 = STYLED_ITEM('color',(#312336),#122061); +#312336 = PRESENTATION_STYLE_ASSIGNMENT((#312337,#312342)); +#312337 = SURFACE_STYLE_USAGE(.BOTH.,#312338); +#312338 = SURFACE_SIDE_STYLE('',(#312339)); +#312339 = SURFACE_STYLE_FILL_AREA(#312340); +#312340 = FILL_AREA_STYLE('',(#312341)); +#312341 = FILL_AREA_STYLE_COLOUR('',#285989); +#312342 = CURVE_STYLE('',#312343,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312344 = STYLED_ITEM('color',(#312345),#122078); +#312345 = PRESENTATION_STYLE_ASSIGNMENT((#312346,#312351)); +#312346 = SURFACE_STYLE_USAGE(.BOTH.,#312347); +#312347 = SURFACE_SIDE_STYLE('',(#312348)); +#312348 = SURFACE_STYLE_FILL_AREA(#312349); +#312349 = FILL_AREA_STYLE('',(#312350)); +#312350 = FILL_AREA_STYLE_COLOUR('',#270350); +#312351 = CURVE_STYLE('',#312352,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312353 = OVER_RIDING_STYLED_ITEM('overriding color',(#312354),#122085, + #312344); +#312354 = PRESENTATION_STYLE_ASSIGNMENT((#312355,#312360)); +#312355 = SURFACE_STYLE_USAGE(.BOTH.,#312356); +#312356 = SURFACE_SIDE_STYLE('',(#312357)); +#312357 = SURFACE_STYLE_FILL_AREA(#312358); +#312358 = FILL_AREA_STYLE('',(#312359)); +#312359 = FILL_AREA_STYLE_COLOUR('',#285989); +#312360 = CURVE_STYLE('',#312361,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312362 = STYLED_ITEM('color',(#312363),#122095); +#312363 = PRESENTATION_STYLE_ASSIGNMENT((#312364,#312369)); +#312364 = SURFACE_STYLE_USAGE(.BOTH.,#312365); +#312365 = SURFACE_SIDE_STYLE('',(#312366)); +#312366 = SURFACE_STYLE_FILL_AREA(#312367); +#312367 = FILL_AREA_STYLE('',(#312368)); +#312368 = FILL_AREA_STYLE_COLOUR('',#270350); +#312369 = CURVE_STYLE('',#312370,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312371 = OVER_RIDING_STYLED_ITEM('overriding color',(#312372),#122100, + #312362); +#312372 = PRESENTATION_STYLE_ASSIGNMENT((#312373,#312378)); +#312373 = SURFACE_STYLE_USAGE(.BOTH.,#312374); +#312374 = SURFACE_SIDE_STYLE('',(#312375)); +#312375 = SURFACE_STYLE_FILL_AREA(#312376); +#312376 = FILL_AREA_STYLE('',(#312377)); +#312377 = FILL_AREA_STYLE_COLOUR('',#285989); +#312378 = CURVE_STYLE('',#312379,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312380 = STYLED_ITEM('color',(#312381),#122112); +#312381 = PRESENTATION_STYLE_ASSIGNMENT((#312382,#312387)); +#312382 = SURFACE_STYLE_USAGE(.BOTH.,#312383); +#312383 = SURFACE_SIDE_STYLE('',(#312384)); +#312384 = SURFACE_STYLE_FILL_AREA(#312385); +#312385 = FILL_AREA_STYLE('',(#312386)); +#312386 = FILL_AREA_STYLE_COLOUR('',#285989); +#312387 = CURVE_STYLE('',#312388,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312389 = STYLED_ITEM('color',(#312390),#122161); +#312390 = PRESENTATION_STYLE_ASSIGNMENT((#312391,#312396)); +#312391 = SURFACE_STYLE_USAGE(.BOTH.,#312392); +#312392 = SURFACE_SIDE_STYLE('',(#312393)); +#312393 = SURFACE_STYLE_FILL_AREA(#312394); +#312394 = FILL_AREA_STYLE('',(#312395)); +#312395 = FILL_AREA_STYLE_COLOUR('',#285989); +#312396 = CURVE_STYLE('',#312397,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312398 = STYLED_ITEM('color',(#312399),#122185); +#312399 = PRESENTATION_STYLE_ASSIGNMENT((#312400,#312405)); +#312400 = SURFACE_STYLE_USAGE(.BOTH.,#312401); +#312401 = SURFACE_SIDE_STYLE('',(#312402)); +#312402 = SURFACE_STYLE_FILL_AREA(#312403); +#312403 = FILL_AREA_STYLE('',(#312404)); +#312404 = FILL_AREA_STYLE_COLOUR('',#285989); +#312405 = CURVE_STYLE('',#312406,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312407 = STYLED_ITEM('color',(#312408),#122227); +#312408 = PRESENTATION_STYLE_ASSIGNMENT((#312409,#312414)); +#312409 = SURFACE_STYLE_USAGE(.BOTH.,#312410); +#312410 = SURFACE_SIDE_STYLE('',(#312411)); +#312411 = SURFACE_STYLE_FILL_AREA(#312412); +#312412 = FILL_AREA_STYLE('',(#312413)); +#312413 = FILL_AREA_STYLE_COLOUR('',#285989); +#312414 = CURVE_STYLE('',#312415,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312416 = STYLED_ITEM('color',(#312417),#122244); +#312417 = PRESENTATION_STYLE_ASSIGNMENT((#312418,#312423)); +#312418 = SURFACE_STYLE_USAGE(.BOTH.,#312419); +#312419 = SURFACE_SIDE_STYLE('',(#312420)); +#312420 = SURFACE_STYLE_FILL_AREA(#312421); +#312421 = FILL_AREA_STYLE('',(#312422)); +#312422 = FILL_AREA_STYLE_COLOUR('',#270350); +#312423 = CURVE_STYLE('',#312424,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312425 = OVER_RIDING_STYLED_ITEM('overriding color',(#312426),#122251, + #312416); +#312426 = PRESENTATION_STYLE_ASSIGNMENT((#312427,#312432)); +#312427 = SURFACE_STYLE_USAGE(.BOTH.,#312428); +#312428 = SURFACE_SIDE_STYLE('',(#312429)); +#312429 = SURFACE_STYLE_FILL_AREA(#312430); +#312430 = FILL_AREA_STYLE('',(#312431)); +#312431 = FILL_AREA_STYLE_COLOUR('',#285989); +#312432 = CURVE_STYLE('',#312433,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312434 = STYLED_ITEM('color',(#312435),#122261); +#312435 = PRESENTATION_STYLE_ASSIGNMENT((#312436,#312441)); +#312436 = SURFACE_STYLE_USAGE(.BOTH.,#312437); +#312437 = SURFACE_SIDE_STYLE('',(#312438)); +#312438 = SURFACE_STYLE_FILL_AREA(#312439); +#312439 = FILL_AREA_STYLE('',(#312440)); +#312440 = FILL_AREA_STYLE_COLOUR('',#270350); +#312441 = CURVE_STYLE('',#312442,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312443 = OVER_RIDING_STYLED_ITEM('overriding color',(#312444),#122266, + #312434); +#312444 = PRESENTATION_STYLE_ASSIGNMENT((#312445,#312450)); +#312445 = SURFACE_STYLE_USAGE(.BOTH.,#312446); +#312446 = SURFACE_SIDE_STYLE('',(#312447)); +#312447 = SURFACE_STYLE_FILL_AREA(#312448); +#312448 = FILL_AREA_STYLE('',(#312449)); +#312449 = FILL_AREA_STYLE_COLOUR('',#285989); +#312450 = CURVE_STYLE('',#312451,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312452 = STYLED_ITEM('color',(#312453),#122278); +#312453 = PRESENTATION_STYLE_ASSIGNMENT((#312454,#312459)); +#312454 = SURFACE_STYLE_USAGE(.BOTH.,#312455); +#312455 = SURFACE_SIDE_STYLE('',(#312456)); +#312456 = SURFACE_STYLE_FILL_AREA(#312457); +#312457 = FILL_AREA_STYLE('',(#312458)); +#312458 = FILL_AREA_STYLE_COLOUR('',#285989); +#312459 = CURVE_STYLE('',#312460,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312461 = STYLED_ITEM('color',(#312462),#122327); +#312462 = PRESENTATION_STYLE_ASSIGNMENT((#312463,#312468)); +#312463 = SURFACE_STYLE_USAGE(.BOTH.,#312464); +#312464 = SURFACE_SIDE_STYLE('',(#312465)); +#312465 = SURFACE_STYLE_FILL_AREA(#312466); +#312466 = FILL_AREA_STYLE('',(#312467)); +#312467 = FILL_AREA_STYLE_COLOUR('',#285989); +#312468 = CURVE_STYLE('',#312469,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312470 = STYLED_ITEM('color',(#312471),#122351); +#312471 = PRESENTATION_STYLE_ASSIGNMENT((#312472,#312477)); +#312472 = SURFACE_STYLE_USAGE(.BOTH.,#312473); +#312473 = SURFACE_SIDE_STYLE('',(#312474)); +#312474 = SURFACE_STYLE_FILL_AREA(#312475); +#312475 = FILL_AREA_STYLE('',(#312476)); +#312476 = FILL_AREA_STYLE_COLOUR('',#285989); +#312477 = CURVE_STYLE('',#312478,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312479 = STYLED_ITEM('color',(#312480),#122393); +#312480 = PRESENTATION_STYLE_ASSIGNMENT((#312481,#312486)); +#312481 = SURFACE_STYLE_USAGE(.BOTH.,#312482); +#312482 = SURFACE_SIDE_STYLE('',(#312483)); +#312483 = SURFACE_STYLE_FILL_AREA(#312484); +#312484 = FILL_AREA_STYLE('',(#312485)); +#312485 = FILL_AREA_STYLE_COLOUR('',#285989); +#312486 = CURVE_STYLE('',#312487,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312488 = STYLED_ITEM('color',(#312489),#122410); +#312489 = PRESENTATION_STYLE_ASSIGNMENT((#312490,#312495)); +#312490 = SURFACE_STYLE_USAGE(.BOTH.,#312491); +#312491 = SURFACE_SIDE_STYLE('',(#312492)); +#312492 = SURFACE_STYLE_FILL_AREA(#312493); +#312493 = FILL_AREA_STYLE('',(#312494)); +#312494 = FILL_AREA_STYLE_COLOUR('',#270350); +#312495 = CURVE_STYLE('',#312496,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312497 = OVER_RIDING_STYLED_ITEM('overriding color',(#312498),#122417, + #312488); +#312498 = PRESENTATION_STYLE_ASSIGNMENT((#312499,#312504)); +#312499 = SURFACE_STYLE_USAGE(.BOTH.,#312500); +#312500 = SURFACE_SIDE_STYLE('',(#312501)); +#312501 = SURFACE_STYLE_FILL_AREA(#312502); +#312502 = FILL_AREA_STYLE('',(#312503)); +#312503 = FILL_AREA_STYLE_COLOUR('',#285989); +#312504 = CURVE_STYLE('',#312505,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312506 = STYLED_ITEM('color',(#312507),#122427); +#312507 = PRESENTATION_STYLE_ASSIGNMENT((#312508,#312513)); +#312508 = SURFACE_STYLE_USAGE(.BOTH.,#312509); +#312509 = SURFACE_SIDE_STYLE('',(#312510)); +#312510 = SURFACE_STYLE_FILL_AREA(#312511); +#312511 = FILL_AREA_STYLE('',(#312512)); +#312512 = FILL_AREA_STYLE_COLOUR('',#270350); +#312513 = CURVE_STYLE('',#312514,POSITIVE_LENGTH_MEASURE(0.1),#270350); +#312514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312515 = OVER_RIDING_STYLED_ITEM('overriding color',(#312516),#122432, + #312506); +#312516 = PRESENTATION_STYLE_ASSIGNMENT((#312517,#312522)); +#312517 = SURFACE_STYLE_USAGE(.BOTH.,#312518); +#312518 = SURFACE_SIDE_STYLE('',(#312519)); +#312519 = SURFACE_STYLE_FILL_AREA(#312520); +#312520 = FILL_AREA_STYLE('',(#312521)); +#312521 = FILL_AREA_STYLE_COLOUR('',#285989); +#312522 = CURVE_STYLE('',#312523,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312524 = STYLED_ITEM('color',(#312525),#122444); +#312525 = PRESENTATION_STYLE_ASSIGNMENT((#312526,#312531)); +#312526 = SURFACE_STYLE_USAGE(.BOTH.,#312527); +#312527 = SURFACE_SIDE_STYLE('',(#312528)); +#312528 = SURFACE_STYLE_FILL_AREA(#312529); +#312529 = FILL_AREA_STYLE('',(#312530)); +#312530 = FILL_AREA_STYLE_COLOUR('',#285989); +#312531 = CURVE_STYLE('',#312532,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312533 = STYLED_ITEM('color',(#312534),#122493); +#312534 = PRESENTATION_STYLE_ASSIGNMENT((#312535,#312540)); +#312535 = SURFACE_STYLE_USAGE(.BOTH.,#312536); +#312536 = SURFACE_SIDE_STYLE('',(#312537)); +#312537 = SURFACE_STYLE_FILL_AREA(#312538); +#312538 = FILL_AREA_STYLE('',(#312539)); +#312539 = FILL_AREA_STYLE_COLOUR('',#285989); +#312540 = CURVE_STYLE('',#312541,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312542 = STYLED_ITEM('color',(#312543),#122517); +#312543 = PRESENTATION_STYLE_ASSIGNMENT((#312544,#312549)); +#312544 = SURFACE_STYLE_USAGE(.BOTH.,#312545); +#312545 = SURFACE_SIDE_STYLE('',(#312546)); +#312546 = SURFACE_STYLE_FILL_AREA(#312547); +#312547 = FILL_AREA_STYLE('',(#312548)); +#312548 = FILL_AREA_STYLE_COLOUR('',#285989); +#312549 = CURVE_STYLE('',#312550,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312551 = STYLED_ITEM('color',(#312552),#122559); +#312552 = PRESENTATION_STYLE_ASSIGNMENT((#312553,#312558)); +#312553 = SURFACE_STYLE_USAGE(.BOTH.,#312554); +#312554 = SURFACE_SIDE_STYLE('',(#312555)); +#312555 = SURFACE_STYLE_FILL_AREA(#312556); +#312556 = FILL_AREA_STYLE('',(#312557)); +#312557 = FILL_AREA_STYLE_COLOUR('',#285989); +#312558 = CURVE_STYLE('',#312559,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312560 = STYLED_ITEM('color',(#312561),#122576); +#312561 = PRESENTATION_STYLE_ASSIGNMENT((#312562,#312567)); +#312562 = SURFACE_STYLE_USAGE(.BOTH.,#312563); +#312563 = SURFACE_SIDE_STYLE('',(#312564)); +#312564 = SURFACE_STYLE_FILL_AREA(#312565); +#312565 = FILL_AREA_STYLE('',(#312566)); +#312566 = FILL_AREA_STYLE_COLOUR('',#285989); +#312567 = CURVE_STYLE('',#312568,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312568 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312569 = STYLED_ITEM('color',(#312570),#122593); +#312570 = PRESENTATION_STYLE_ASSIGNMENT((#312571,#312576)); +#312571 = SURFACE_STYLE_USAGE(.BOTH.,#312572); +#312572 = SURFACE_SIDE_STYLE('',(#312573)); +#312573 = SURFACE_STYLE_FILL_AREA(#312574); +#312574 = FILL_AREA_STYLE('',(#312575)); +#312575 = FILL_AREA_STYLE_COLOUR('',#285989); +#312576 = CURVE_STYLE('',#312577,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312578 = STYLED_ITEM('color',(#312579),#122610); +#312579 = PRESENTATION_STYLE_ASSIGNMENT((#312580,#312585)); +#312580 = SURFACE_STYLE_USAGE(.BOTH.,#312581); +#312581 = SURFACE_SIDE_STYLE('',(#312582)); +#312582 = SURFACE_STYLE_FILL_AREA(#312583); +#312583 = FILL_AREA_STYLE('',(#312584)); +#312584 = FILL_AREA_STYLE_COLOUR('',#285989); +#312585 = CURVE_STYLE('',#312586,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312587 = STYLED_ITEM('color',(#312588),#122622); +#312588 = PRESENTATION_STYLE_ASSIGNMENT((#312589,#312594)); +#312589 = SURFACE_STYLE_USAGE(.BOTH.,#312590); +#312590 = SURFACE_SIDE_STYLE('',(#312591)); +#312591 = SURFACE_STYLE_FILL_AREA(#312592); +#312592 = FILL_AREA_STYLE('',(#312593)); +#312593 = FILL_AREA_STYLE_COLOUR('',#285989); +#312594 = CURVE_STYLE('',#312595,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312596 = STYLED_ITEM('color',(#312597),#122639); +#312597 = PRESENTATION_STYLE_ASSIGNMENT((#312598,#312603)); +#312598 = SURFACE_STYLE_USAGE(.BOTH.,#312599); +#312599 = SURFACE_SIDE_STYLE('',(#312600)); +#312600 = SURFACE_STYLE_FILL_AREA(#312601); +#312601 = FILL_AREA_STYLE('',(#312602)); +#312602 = FILL_AREA_STYLE_COLOUR('',#285989); +#312603 = CURVE_STYLE('',#312604,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312605 = STYLED_ITEM('color',(#312606),#122656); +#312606 = PRESENTATION_STYLE_ASSIGNMENT((#312607,#312612)); +#312607 = SURFACE_STYLE_USAGE(.BOTH.,#312608); +#312608 = SURFACE_SIDE_STYLE('',(#312609)); +#312609 = SURFACE_STYLE_FILL_AREA(#312610); +#312610 = FILL_AREA_STYLE('',(#312611)); +#312611 = FILL_AREA_STYLE_COLOUR('',#285989); +#312612 = CURVE_STYLE('',#312613,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312613 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312614 = STYLED_ITEM('color',(#312615),#122668); +#312615 = PRESENTATION_STYLE_ASSIGNMENT((#312616,#312621)); +#312616 = SURFACE_STYLE_USAGE(.BOTH.,#312617); +#312617 = SURFACE_SIDE_STYLE('',(#312618)); +#312618 = SURFACE_STYLE_FILL_AREA(#312619); +#312619 = FILL_AREA_STYLE('',(#312620)); +#312620 = FILL_AREA_STYLE_COLOUR('',#285989); +#312621 = CURVE_STYLE('',#312622,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312622 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312623 = STYLED_ITEM('color',(#312624),#122685); +#312624 = PRESENTATION_STYLE_ASSIGNMENT((#312625,#312630)); +#312625 = SURFACE_STYLE_USAGE(.BOTH.,#312626); +#312626 = SURFACE_SIDE_STYLE('',(#312627)); +#312627 = SURFACE_STYLE_FILL_AREA(#312628); +#312628 = FILL_AREA_STYLE('',(#312629)); +#312629 = FILL_AREA_STYLE_COLOUR('',#285989); +#312630 = CURVE_STYLE('',#312631,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312631 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312632 = STYLED_ITEM('color',(#312633),#122702); +#312633 = PRESENTATION_STYLE_ASSIGNMENT((#312634,#312639)); +#312634 = SURFACE_STYLE_USAGE(.BOTH.,#312635); +#312635 = SURFACE_SIDE_STYLE('',(#312636)); +#312636 = SURFACE_STYLE_FILL_AREA(#312637); +#312637 = FILL_AREA_STYLE('',(#312638)); +#312638 = FILL_AREA_STYLE_COLOUR('',#285989); +#312639 = CURVE_STYLE('',#312640,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312641 = STYLED_ITEM('color',(#312642),#122714); +#312642 = PRESENTATION_STYLE_ASSIGNMENT((#312643,#312648)); +#312643 = SURFACE_STYLE_USAGE(.BOTH.,#312644); +#312644 = SURFACE_SIDE_STYLE('',(#312645)); +#312645 = SURFACE_STYLE_FILL_AREA(#312646); +#312646 = FILL_AREA_STYLE('',(#312647)); +#312647 = FILL_AREA_STYLE_COLOUR('',#285989); +#312648 = CURVE_STYLE('',#312649,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312649 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312650 = STYLED_ITEM('color',(#312651),#122731); +#312651 = PRESENTATION_STYLE_ASSIGNMENT((#312652,#312657)); +#312652 = SURFACE_STYLE_USAGE(.BOTH.,#312653); +#312653 = SURFACE_SIDE_STYLE('',(#312654)); +#312654 = SURFACE_STYLE_FILL_AREA(#312655); +#312655 = FILL_AREA_STYLE('',(#312656)); +#312656 = FILL_AREA_STYLE_COLOUR('',#285989); +#312657 = CURVE_STYLE('',#312658,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312658 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312659 = STYLED_ITEM('color',(#312660),#122748); +#312660 = PRESENTATION_STYLE_ASSIGNMENT((#312661,#312666)); +#312661 = SURFACE_STYLE_USAGE(.BOTH.,#312662); +#312662 = SURFACE_SIDE_STYLE('',(#312663)); +#312663 = SURFACE_STYLE_FILL_AREA(#312664); +#312664 = FILL_AREA_STYLE('',(#312665)); +#312665 = FILL_AREA_STYLE_COLOUR('',#285989); +#312666 = CURVE_STYLE('',#312667,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312667 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312668 = STYLED_ITEM('color',(#312669),#122760); +#312669 = PRESENTATION_STYLE_ASSIGNMENT((#312670,#312675)); +#312670 = SURFACE_STYLE_USAGE(.BOTH.,#312671); +#312671 = SURFACE_SIDE_STYLE('',(#312672)); +#312672 = SURFACE_STYLE_FILL_AREA(#312673); +#312673 = FILL_AREA_STYLE('',(#312674)); +#312674 = FILL_AREA_STYLE_COLOUR('',#285989); +#312675 = CURVE_STYLE('',#312676,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312676 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312677 = STYLED_ITEM('color',(#312678),#122777); +#312678 = PRESENTATION_STYLE_ASSIGNMENT((#312679,#312684)); +#312679 = SURFACE_STYLE_USAGE(.BOTH.,#312680); +#312680 = SURFACE_SIDE_STYLE('',(#312681)); +#312681 = SURFACE_STYLE_FILL_AREA(#312682); +#312682 = FILL_AREA_STYLE('',(#312683)); +#312683 = FILL_AREA_STYLE_COLOUR('',#285989); +#312684 = CURVE_STYLE('',#312685,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312685 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312686 = STYLED_ITEM('color',(#312687),#122794); +#312687 = PRESENTATION_STYLE_ASSIGNMENT((#312688,#312693)); +#312688 = SURFACE_STYLE_USAGE(.BOTH.,#312689); +#312689 = SURFACE_SIDE_STYLE('',(#312690)); +#312690 = SURFACE_STYLE_FILL_AREA(#312691); +#312691 = FILL_AREA_STYLE('',(#312692)); +#312692 = FILL_AREA_STYLE_COLOUR('',#285989); +#312693 = CURVE_STYLE('',#312694,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312694 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312695 = STYLED_ITEM('color',(#312696),#122806); +#312696 = PRESENTATION_STYLE_ASSIGNMENT((#312697,#312702)); +#312697 = SURFACE_STYLE_USAGE(.BOTH.,#312698); +#312698 = SURFACE_SIDE_STYLE('',(#312699)); +#312699 = SURFACE_STYLE_FILL_AREA(#312700); +#312700 = FILL_AREA_STYLE('',(#312701)); +#312701 = FILL_AREA_STYLE_COLOUR('',#285989); +#312702 = CURVE_STYLE('',#312703,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312703 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312704 = STYLED_ITEM('color',(#312705),#122823); +#312705 = PRESENTATION_STYLE_ASSIGNMENT((#312706,#312711)); +#312706 = SURFACE_STYLE_USAGE(.BOTH.,#312707); +#312707 = SURFACE_SIDE_STYLE('',(#312708)); +#312708 = SURFACE_STYLE_FILL_AREA(#312709); +#312709 = FILL_AREA_STYLE('',(#312710)); +#312710 = FILL_AREA_STYLE_COLOUR('',#285989); +#312711 = CURVE_STYLE('',#312712,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312712 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312713 = STYLED_ITEM('color',(#312714),#122840); +#312714 = PRESENTATION_STYLE_ASSIGNMENT((#312715,#312720)); +#312715 = SURFACE_STYLE_USAGE(.BOTH.,#312716); +#312716 = SURFACE_SIDE_STYLE('',(#312717)); +#312717 = SURFACE_STYLE_FILL_AREA(#312718); +#312718 = FILL_AREA_STYLE('',(#312719)); +#312719 = FILL_AREA_STYLE_COLOUR('',#285989); +#312720 = CURVE_STYLE('',#312721,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312721 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312722 = STYLED_ITEM('color',(#312723),#122852); +#312723 = PRESENTATION_STYLE_ASSIGNMENT((#312724,#312729)); +#312724 = SURFACE_STYLE_USAGE(.BOTH.,#312725); +#312725 = SURFACE_SIDE_STYLE('',(#312726)); +#312726 = SURFACE_STYLE_FILL_AREA(#312727); +#312727 = FILL_AREA_STYLE('',(#312728)); +#312728 = FILL_AREA_STYLE_COLOUR('',#285989); +#312729 = CURVE_STYLE('',#312730,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312730 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312731 = STYLED_ITEM('color',(#312732),#122869); +#312732 = PRESENTATION_STYLE_ASSIGNMENT((#312733,#312738)); +#312733 = SURFACE_STYLE_USAGE(.BOTH.,#312734); +#312734 = SURFACE_SIDE_STYLE('',(#312735)); +#312735 = SURFACE_STYLE_FILL_AREA(#312736); +#312736 = FILL_AREA_STYLE('',(#312737)); +#312737 = FILL_AREA_STYLE_COLOUR('',#285989); +#312738 = CURVE_STYLE('',#312739,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312739 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312740 = STYLED_ITEM('color',(#312741),#122886); +#312741 = PRESENTATION_STYLE_ASSIGNMENT((#312742,#312747)); +#312742 = SURFACE_STYLE_USAGE(.BOTH.,#312743); +#312743 = SURFACE_SIDE_STYLE('',(#312744)); +#312744 = SURFACE_STYLE_FILL_AREA(#312745); +#312745 = FILL_AREA_STYLE('',(#312746)); +#312746 = FILL_AREA_STYLE_COLOUR('',#285989); +#312747 = CURVE_STYLE('',#312748,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312748 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312749 = STYLED_ITEM('color',(#312750),#122898); +#312750 = PRESENTATION_STYLE_ASSIGNMENT((#312751,#312756)); +#312751 = SURFACE_STYLE_USAGE(.BOTH.,#312752); +#312752 = SURFACE_SIDE_STYLE('',(#312753)); +#312753 = SURFACE_STYLE_FILL_AREA(#312754); +#312754 = FILL_AREA_STYLE('',(#312755)); +#312755 = FILL_AREA_STYLE_COLOUR('',#285989); +#312756 = CURVE_STYLE('',#312757,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312757 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312758 = STYLED_ITEM('color',(#312759),#122915); +#312759 = PRESENTATION_STYLE_ASSIGNMENT((#312760,#312765)); +#312760 = SURFACE_STYLE_USAGE(.BOTH.,#312761); +#312761 = SURFACE_SIDE_STYLE('',(#312762)); +#312762 = SURFACE_STYLE_FILL_AREA(#312763); +#312763 = FILL_AREA_STYLE('',(#312764)); +#312764 = FILL_AREA_STYLE_COLOUR('',#285989); +#312765 = CURVE_STYLE('',#312766,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312766 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312767 = STYLED_ITEM('color',(#312768),#122932); +#312768 = PRESENTATION_STYLE_ASSIGNMENT((#312769,#312774)); +#312769 = SURFACE_STYLE_USAGE(.BOTH.,#312770); +#312770 = SURFACE_SIDE_STYLE('',(#312771)); +#312771 = SURFACE_STYLE_FILL_AREA(#312772); +#312772 = FILL_AREA_STYLE('',(#312773)); +#312773 = FILL_AREA_STYLE_COLOUR('',#285989); +#312774 = CURVE_STYLE('',#312775,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312775 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312776 = STYLED_ITEM('color',(#312777),#122944); +#312777 = PRESENTATION_STYLE_ASSIGNMENT((#312778,#312783)); +#312778 = SURFACE_STYLE_USAGE(.BOTH.,#312779); +#312779 = SURFACE_SIDE_STYLE('',(#312780)); +#312780 = SURFACE_STYLE_FILL_AREA(#312781); +#312781 = FILL_AREA_STYLE('',(#312782)); +#312782 = FILL_AREA_STYLE_COLOUR('',#285989); +#312783 = CURVE_STYLE('',#312784,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312784 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312785 = STYLED_ITEM('color',(#312786),#122961); +#312786 = PRESENTATION_STYLE_ASSIGNMENT((#312787,#312792)); +#312787 = SURFACE_STYLE_USAGE(.BOTH.,#312788); +#312788 = SURFACE_SIDE_STYLE('',(#312789)); +#312789 = SURFACE_STYLE_FILL_AREA(#312790); +#312790 = FILL_AREA_STYLE('',(#312791)); +#312791 = FILL_AREA_STYLE_COLOUR('',#285989); +#312792 = CURVE_STYLE('',#312793,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312793 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312794 = STYLED_ITEM('color',(#312795),#122978); +#312795 = PRESENTATION_STYLE_ASSIGNMENT((#312796,#312801)); +#312796 = SURFACE_STYLE_USAGE(.BOTH.,#312797); +#312797 = SURFACE_SIDE_STYLE('',(#312798)); +#312798 = SURFACE_STYLE_FILL_AREA(#312799); +#312799 = FILL_AREA_STYLE('',(#312800)); +#312800 = FILL_AREA_STYLE_COLOUR('',#285989); +#312801 = CURVE_STYLE('',#312802,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312802 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312803 = STYLED_ITEM('color',(#312804),#122990); +#312804 = PRESENTATION_STYLE_ASSIGNMENT((#312805,#312810)); +#312805 = SURFACE_STYLE_USAGE(.BOTH.,#312806); +#312806 = SURFACE_SIDE_STYLE('',(#312807)); +#312807 = SURFACE_STYLE_FILL_AREA(#312808); +#312808 = FILL_AREA_STYLE('',(#312809)); +#312809 = FILL_AREA_STYLE_COLOUR('',#285989); +#312810 = CURVE_STYLE('',#312811,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312811 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312812 = STYLED_ITEM('color',(#312813),#123007); +#312813 = PRESENTATION_STYLE_ASSIGNMENT((#312814,#312819)); +#312814 = SURFACE_STYLE_USAGE(.BOTH.,#312815); +#312815 = SURFACE_SIDE_STYLE('',(#312816)); +#312816 = SURFACE_STYLE_FILL_AREA(#312817); +#312817 = FILL_AREA_STYLE('',(#312818)); +#312818 = FILL_AREA_STYLE_COLOUR('',#285989); +#312819 = CURVE_STYLE('',#312820,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312820 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312821 = STYLED_ITEM('color',(#312822),#123024); +#312822 = PRESENTATION_STYLE_ASSIGNMENT((#312823,#312828)); +#312823 = SURFACE_STYLE_USAGE(.BOTH.,#312824); +#312824 = SURFACE_SIDE_STYLE('',(#312825)); +#312825 = SURFACE_STYLE_FILL_AREA(#312826); +#312826 = FILL_AREA_STYLE('',(#312827)); +#312827 = FILL_AREA_STYLE_COLOUR('',#285989); +#312828 = CURVE_STYLE('',#312829,POSITIVE_LENGTH_MEASURE(0.1),#285989); +#312829 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#312830 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #312831),#96055); +#312831 = STYLED_ITEM('color',(#312832),#95713); +#312832 = PRESENTATION_STYLE_ASSIGNMENT((#312833)); +#312833 = SURFACE_STYLE_USAGE(.BOTH.,#312834); +#312834 = SURFACE_SIDE_STYLE('',(#312835)); +#312835 = SURFACE_STYLE_FILL_AREA(#312836); +#312836 = FILL_AREA_STYLE('',(#312837)); +#312837 = FILL_AREA_STYLE_COLOUR('',#270350); +#312838 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #312839,#312846,#312853,#312860,#312867,#312874,#312881,#312888, + #312895,#312902,#312909,#312916,#312923,#312930,#312937,#312944, + #312951,#312958,#312965,#312972,#312979,#312986,#312993,#313000, + #313007,#313014,#313021,#313028,#313035,#313042,#313049,#313056, + #313063,#313070,#313077,#313084,#313091,#313098,#313105,#313112, + #313119,#313126,#313133,#313140,#313147,#313154,#313161,#313168, + #313175,#313182,#313189,#313196,#313203,#313210,#313217,#313224, + #313231,#313238,#313245,#313252,#313259,#313266,#313273,#313280, + #313287,#313294,#313301,#313308,#313315,#313322,#313329,#313336, + #313343,#313350,#313357,#313364,#313371,#313378,#313385,#313392, + #313399,#313406,#313413,#313420,#313427,#313434,#313441,#313448, + #313455,#313462,#313469,#313476,#313483,#313490,#313497,#313504, + #313511,#313518,#313525,#313532,#313539,#313546,#313553,#313560, + #313567),#101580); +#312839 = STYLED_ITEM('color',(#312840),#98353); +#312840 = PRESENTATION_STYLE_ASSIGNMENT((#312841)); +#312841 = SURFACE_STYLE_USAGE(.BOTH.,#312842); +#312842 = SURFACE_SIDE_STYLE('',(#312843)); +#312843 = SURFACE_STYLE_FILL_AREA(#312844); +#312844 = FILL_AREA_STYLE('',(#312845)); +#312845 = FILL_AREA_STYLE_COLOUR('',#270350); +#312846 = STYLED_ITEM('color',(#312847),#98370); +#312847 = PRESENTATION_STYLE_ASSIGNMENT((#312848)); +#312848 = SURFACE_STYLE_USAGE(.BOTH.,#312849); +#312849 = SURFACE_SIDE_STYLE('',(#312850)); +#312850 = SURFACE_STYLE_FILL_AREA(#312851); +#312851 = FILL_AREA_STYLE('',(#312852)); +#312852 = FILL_AREA_STYLE_COLOUR('',#270350); +#312853 = STYLED_ITEM('color',(#312854),#98395); +#312854 = PRESENTATION_STYLE_ASSIGNMENT((#312855)); +#312855 = SURFACE_STYLE_USAGE(.BOTH.,#312856); +#312856 = SURFACE_SIDE_STYLE('',(#312857)); +#312857 = SURFACE_STYLE_FILL_AREA(#312858); +#312858 = FILL_AREA_STYLE('',(#312859)); +#312859 = FILL_AREA_STYLE_COLOUR('',#270441); +#312860 = STYLED_ITEM('color',(#312861),#98518); +#312861 = PRESENTATION_STYLE_ASSIGNMENT((#312862)); +#312862 = SURFACE_STYLE_USAGE(.BOTH.,#312863); +#312863 = SURFACE_SIDE_STYLE('',(#312864)); +#312864 = SURFACE_STYLE_FILL_AREA(#312865); +#312865 = FILL_AREA_STYLE('',(#312866)); +#312866 = FILL_AREA_STYLE_COLOUR('',#270441); +#312867 = STYLED_ITEM('color',(#312868),#98549); +#312868 = PRESENTATION_STYLE_ASSIGNMENT((#312869)); +#312869 = SURFACE_STYLE_USAGE(.BOTH.,#312870); +#312870 = SURFACE_SIDE_STYLE('',(#312871)); +#312871 = SURFACE_STYLE_FILL_AREA(#312872); +#312872 = FILL_AREA_STYLE('',(#312873)); +#312873 = FILL_AREA_STYLE_COLOUR('',#270441); +#312874 = STYLED_ITEM('color',(#312875),#98574); +#312875 = PRESENTATION_STYLE_ASSIGNMENT((#312876)); +#312876 = SURFACE_STYLE_USAGE(.BOTH.,#312877); +#312877 = SURFACE_SIDE_STYLE('',(#312878)); +#312878 = SURFACE_STYLE_FILL_AREA(#312879); +#312879 = FILL_AREA_STYLE('',(#312880)); +#312880 = FILL_AREA_STYLE_COLOUR('',#270441); +#312881 = STYLED_ITEM('color',(#312882),#98599); +#312882 = PRESENTATION_STYLE_ASSIGNMENT((#312883)); +#312883 = SURFACE_STYLE_USAGE(.BOTH.,#312884); +#312884 = SURFACE_SIDE_STYLE('',(#312885)); +#312885 = SURFACE_STYLE_FILL_AREA(#312886); +#312886 = FILL_AREA_STYLE('',(#312887)); +#312887 = FILL_AREA_STYLE_COLOUR('',#270441); +#312888 = STYLED_ITEM('color',(#312889),#98623); +#312889 = PRESENTATION_STYLE_ASSIGNMENT((#312890)); +#312890 = SURFACE_STYLE_USAGE(.BOTH.,#312891); +#312891 = SURFACE_SIDE_STYLE('',(#312892)); +#312892 = SURFACE_STYLE_FILL_AREA(#312893); +#312893 = FILL_AREA_STYLE('',(#312894)); +#312894 = FILL_AREA_STYLE_COLOUR('',#270441); +#312895 = STYLED_ITEM('color',(#312896),#98647); +#312896 = PRESENTATION_STYLE_ASSIGNMENT((#312897)); +#312897 = SURFACE_STYLE_USAGE(.BOTH.,#312898); +#312898 = SURFACE_SIDE_STYLE('',(#312899)); +#312899 = SURFACE_STYLE_FILL_AREA(#312900); +#312900 = FILL_AREA_STYLE('',(#312901)); +#312901 = FILL_AREA_STYLE_COLOUR('',#270441); +#312902 = STYLED_ITEM('color',(#312903),#98672); +#312903 = PRESENTATION_STYLE_ASSIGNMENT((#312904)); +#312904 = SURFACE_STYLE_USAGE(.BOTH.,#312905); +#312905 = SURFACE_SIDE_STYLE('',(#312906)); +#312906 = SURFACE_STYLE_FILL_AREA(#312907); +#312907 = FILL_AREA_STYLE('',(#312908)); +#312908 = FILL_AREA_STYLE_COLOUR('',#270441); +#312909 = STYLED_ITEM('color',(#312910),#98697); +#312910 = PRESENTATION_STYLE_ASSIGNMENT((#312911)); +#312911 = SURFACE_STYLE_USAGE(.BOTH.,#312912); +#312912 = SURFACE_SIDE_STYLE('',(#312913)); +#312913 = SURFACE_STYLE_FILL_AREA(#312914); +#312914 = FILL_AREA_STYLE('',(#312915)); +#312915 = FILL_AREA_STYLE_COLOUR('',#270441); +#312916 = STYLED_ITEM('color',(#312917),#98714); +#312917 = PRESENTATION_STYLE_ASSIGNMENT((#312918)); +#312918 = SURFACE_STYLE_USAGE(.BOTH.,#312919); +#312919 = SURFACE_SIDE_STYLE('',(#312920)); +#312920 = SURFACE_STYLE_FILL_AREA(#312921); +#312921 = FILL_AREA_STYLE('',(#312922)); +#312922 = FILL_AREA_STYLE_COLOUR('',#270350); +#312923 = STYLED_ITEM('color',(#312924),#98739); +#312924 = PRESENTATION_STYLE_ASSIGNMENT((#312925)); +#312925 = SURFACE_STYLE_USAGE(.BOTH.,#312926); +#312926 = SURFACE_SIDE_STYLE('',(#312927)); +#312927 = SURFACE_STYLE_FILL_AREA(#312928); +#312928 = FILL_AREA_STYLE('',(#312929)); +#312929 = FILL_AREA_STYLE_COLOUR('',#270350); +#312930 = STYLED_ITEM('color',(#312931),#98764); +#312931 = PRESENTATION_STYLE_ASSIGNMENT((#312932)); +#312932 = SURFACE_STYLE_USAGE(.BOTH.,#312933); +#312933 = SURFACE_SIDE_STYLE('',(#312934)); +#312934 = SURFACE_STYLE_FILL_AREA(#312935); +#312935 = FILL_AREA_STYLE('',(#312936)); +#312936 = FILL_AREA_STYLE_COLOUR('',#270350); +#312937 = STYLED_ITEM('color',(#312938),#98789); +#312938 = PRESENTATION_STYLE_ASSIGNMENT((#312939)); +#312939 = SURFACE_STYLE_USAGE(.BOTH.,#312940); +#312940 = SURFACE_SIDE_STYLE('',(#312941)); +#312941 = SURFACE_STYLE_FILL_AREA(#312942); +#312942 = FILL_AREA_STYLE('',(#312943)); +#312943 = FILL_AREA_STYLE_COLOUR('',#270350); +#312944 = STYLED_ITEM('color',(#312945),#98814); +#312945 = PRESENTATION_STYLE_ASSIGNMENT((#312946)); +#312946 = SURFACE_STYLE_USAGE(.BOTH.,#312947); +#312947 = SURFACE_SIDE_STYLE('',(#312948)); +#312948 = SURFACE_STYLE_FILL_AREA(#312949); +#312949 = FILL_AREA_STYLE('',(#312950)); +#312950 = FILL_AREA_STYLE_COLOUR('',#270350); +#312951 = STYLED_ITEM('color',(#312952),#98845); +#312952 = PRESENTATION_STYLE_ASSIGNMENT((#312953)); +#312953 = SURFACE_STYLE_USAGE(.BOTH.,#312954); +#312954 = SURFACE_SIDE_STYLE('',(#312955)); +#312955 = SURFACE_STYLE_FILL_AREA(#312956); +#312956 = FILL_AREA_STYLE('',(#312957)); +#312957 = FILL_AREA_STYLE_COLOUR('',#270350); +#312958 = STYLED_ITEM('color',(#312959),#98870); +#312959 = PRESENTATION_STYLE_ASSIGNMENT((#312960)); +#312960 = SURFACE_STYLE_USAGE(.BOTH.,#312961); +#312961 = SURFACE_SIDE_STYLE('',(#312962)); +#312962 = SURFACE_STYLE_FILL_AREA(#312963); +#312963 = FILL_AREA_STYLE('',(#312964)); +#312964 = FILL_AREA_STYLE_COLOUR('',#270350); +#312965 = STYLED_ITEM('color',(#312966),#98895); +#312966 = PRESENTATION_STYLE_ASSIGNMENT((#312967)); +#312967 = SURFACE_STYLE_USAGE(.BOTH.,#312968); +#312968 = SURFACE_SIDE_STYLE('',(#312969)); +#312969 = SURFACE_STYLE_FILL_AREA(#312970); +#312970 = FILL_AREA_STYLE('',(#312971)); +#312971 = FILL_AREA_STYLE_COLOUR('',#270350); +#312972 = STYLED_ITEM('color',(#312973),#98983); +#312973 = PRESENTATION_STYLE_ASSIGNMENT((#312974)); +#312974 = SURFACE_STYLE_USAGE(.BOTH.,#312975); +#312975 = SURFACE_SIDE_STYLE('',(#312976)); +#312976 = SURFACE_STYLE_FILL_AREA(#312977); +#312977 = FILL_AREA_STYLE('',(#312978)); +#312978 = FILL_AREA_STYLE_COLOUR('',#270350); +#312979 = STYLED_ITEM('color',(#312980),#99071); +#312980 = PRESENTATION_STYLE_ASSIGNMENT((#312981)); +#312981 = SURFACE_STYLE_USAGE(.BOTH.,#312982); +#312982 = SURFACE_SIDE_STYLE('',(#312983)); +#312983 = SURFACE_STYLE_FILL_AREA(#312984); +#312984 = FILL_AREA_STYLE('',(#312985)); +#312985 = FILL_AREA_STYLE_COLOUR('',#270350); +#312986 = STYLED_ITEM('color',(#312987),#99096); +#312987 = PRESENTATION_STYLE_ASSIGNMENT((#312988)); +#312988 = SURFACE_STYLE_USAGE(.BOTH.,#312989); +#312989 = SURFACE_SIDE_STYLE('',(#312990)); +#312990 = SURFACE_STYLE_FILL_AREA(#312991); +#312991 = FILL_AREA_STYLE('',(#312992)); +#312992 = FILL_AREA_STYLE_COLOUR('',#270350); +#312993 = STYLED_ITEM('color',(#312994),#99121); +#312994 = PRESENTATION_STYLE_ASSIGNMENT((#312995)); +#312995 = SURFACE_STYLE_USAGE(.BOTH.,#312996); +#312996 = SURFACE_SIDE_STYLE('',(#312997)); +#312997 = SURFACE_STYLE_FILL_AREA(#312998); +#312998 = FILL_AREA_STYLE('',(#312999)); +#312999 = FILL_AREA_STYLE_COLOUR('',#270350); +#313000 = STYLED_ITEM('color',(#313001),#99138); +#313001 = PRESENTATION_STYLE_ASSIGNMENT((#313002)); +#313002 = SURFACE_STYLE_USAGE(.BOTH.,#313003); +#313003 = SURFACE_SIDE_STYLE('',(#313004)); +#313004 = SURFACE_STYLE_FILL_AREA(#313005); +#313005 = FILL_AREA_STYLE('',(#313006)); +#313006 = FILL_AREA_STYLE_COLOUR('',#270350); +#313007 = STYLED_ITEM('color',(#313008),#99147); +#313008 = PRESENTATION_STYLE_ASSIGNMENT((#313009)); +#313009 = SURFACE_STYLE_USAGE(.BOTH.,#313010); +#313010 = SURFACE_SIDE_STYLE('',(#313011)); +#313011 = SURFACE_STYLE_FILL_AREA(#313012); +#313012 = FILL_AREA_STYLE('',(#313013)); +#313013 = FILL_AREA_STYLE_COLOUR('',#270350); +#313014 = STYLED_ITEM('color',(#313015),#99173); +#313015 = PRESENTATION_STYLE_ASSIGNMENT((#313016)); +#313016 = SURFACE_STYLE_USAGE(.BOTH.,#313017); +#313017 = SURFACE_SIDE_STYLE('',(#313018)); +#313018 = SURFACE_STYLE_FILL_AREA(#313019); +#313019 = FILL_AREA_STYLE('',(#313020)); +#313020 = FILL_AREA_STYLE_COLOUR('',#270350); +#313021 = STYLED_ITEM('color',(#313022),#99182); +#313022 = PRESENTATION_STYLE_ASSIGNMENT((#313023)); +#313023 = SURFACE_STYLE_USAGE(.BOTH.,#313024); +#313024 = SURFACE_SIDE_STYLE('',(#313025)); +#313025 = SURFACE_STYLE_FILL_AREA(#313026); +#313026 = FILL_AREA_STYLE('',(#313027)); +#313027 = FILL_AREA_STYLE_COLOUR('',#270350); +#313028 = STYLED_ITEM('color',(#313029),#99191); +#313029 = PRESENTATION_STYLE_ASSIGNMENT((#313030)); +#313030 = SURFACE_STYLE_USAGE(.BOTH.,#313031); +#313031 = SURFACE_SIDE_STYLE('',(#313032)); +#313032 = SURFACE_STYLE_FILL_AREA(#313033); +#313033 = FILL_AREA_STYLE('',(#313034)); +#313034 = FILL_AREA_STYLE_COLOUR('',#270350); +#313035 = STYLED_ITEM('color',(#313036),#99235); +#313036 = PRESENTATION_STYLE_ASSIGNMENT((#313037)); +#313037 = SURFACE_STYLE_USAGE(.BOTH.,#313038); +#313038 = SURFACE_SIDE_STYLE('',(#313039)); +#313039 = SURFACE_STYLE_FILL_AREA(#313040); +#313040 = FILL_AREA_STYLE('',(#313041)); +#313041 = FILL_AREA_STYLE_COLOUR('',#270441); +#313042 = STYLED_ITEM('color',(#313043),#99385); +#313043 = PRESENTATION_STYLE_ASSIGNMENT((#313044)); +#313044 = SURFACE_STYLE_USAGE(.BOTH.,#313045); +#313045 = SURFACE_SIDE_STYLE('',(#313046)); +#313046 = SURFACE_STYLE_FILL_AREA(#313047); +#313047 = FILL_AREA_STYLE('',(#313048)); +#313048 = FILL_AREA_STYLE_COLOUR('',#270441); +#313049 = STYLED_ITEM('color',(#313050),#99409); +#313050 = PRESENTATION_STYLE_ASSIGNMENT((#313051)); +#313051 = SURFACE_STYLE_USAGE(.BOTH.,#313052); +#313052 = SURFACE_SIDE_STYLE('',(#313053)); +#313053 = SURFACE_STYLE_FILL_AREA(#313054); +#313054 = FILL_AREA_STYLE('',(#313055)); +#313055 = FILL_AREA_STYLE_COLOUR('',#270441); +#313056 = STYLED_ITEM('color',(#313057),#99552); +#313057 = PRESENTATION_STYLE_ASSIGNMENT((#313058)); +#313058 = SURFACE_STYLE_USAGE(.BOTH.,#313059); +#313059 = SURFACE_SIDE_STYLE('',(#313060)); +#313060 = SURFACE_STYLE_FILL_AREA(#313061); +#313061 = FILL_AREA_STYLE('',(#313062)); +#313062 = FILL_AREA_STYLE_COLOUR('',#270441); +#313063 = STYLED_ITEM('color',(#313064),#99702); +#313064 = PRESENTATION_STYLE_ASSIGNMENT((#313065)); +#313065 = SURFACE_STYLE_USAGE(.BOTH.,#313066); +#313066 = SURFACE_SIDE_STYLE('',(#313067)); +#313067 = SURFACE_STYLE_FILL_AREA(#313068); +#313068 = FILL_AREA_STYLE('',(#313069)); +#313069 = FILL_AREA_STYLE_COLOUR('',#270441); +#313070 = STYLED_ITEM('color',(#313071),#99852); +#313071 = PRESENTATION_STYLE_ASSIGNMENT((#313072)); +#313072 = SURFACE_STYLE_USAGE(.BOTH.,#313073); +#313073 = SURFACE_SIDE_STYLE('',(#313074)); +#313074 = SURFACE_STYLE_FILL_AREA(#313075); +#313075 = FILL_AREA_STYLE('',(#313076)); +#313076 = FILL_AREA_STYLE_COLOUR('',#270441); +#313077 = STYLED_ITEM('color',(#313078),#99869); +#313078 = PRESENTATION_STYLE_ASSIGNMENT((#313079)); +#313079 = SURFACE_STYLE_USAGE(.BOTH.,#313080); +#313080 = SURFACE_SIDE_STYLE('',(#313081)); +#313081 = SURFACE_STYLE_FILL_AREA(#313082); +#313082 = FILL_AREA_STYLE('',(#313083)); +#313083 = FILL_AREA_STYLE_COLOUR('',#270441); +#313084 = STYLED_ITEM('color',(#313085),#100019); +#313085 = PRESENTATION_STYLE_ASSIGNMENT((#313086)); +#313086 = SURFACE_STYLE_USAGE(.BOTH.,#313087); +#313087 = SURFACE_SIDE_STYLE('',(#313088)); +#313088 = SURFACE_STYLE_FILL_AREA(#313089); +#313089 = FILL_AREA_STYLE('',(#313090)); +#313090 = FILL_AREA_STYLE_COLOUR('',#270441); +#313091 = STYLED_ITEM('color',(#313092),#100043); +#313092 = PRESENTATION_STYLE_ASSIGNMENT((#313093)); +#313093 = SURFACE_STYLE_USAGE(.BOTH.,#313094); +#313094 = SURFACE_SIDE_STYLE('',(#313095)); +#313095 = SURFACE_STYLE_FILL_AREA(#313096); +#313096 = FILL_AREA_STYLE('',(#313097)); +#313097 = FILL_AREA_STYLE_COLOUR('',#270441); +#313098 = STYLED_ITEM('color',(#313099),#100186); +#313099 = PRESENTATION_STYLE_ASSIGNMENT((#313100)); +#313100 = SURFACE_STYLE_USAGE(.BOTH.,#313101); +#313101 = SURFACE_SIDE_STYLE('',(#313102)); +#313102 = SURFACE_STYLE_FILL_AREA(#313103); +#313103 = FILL_AREA_STYLE('',(#313104)); +#313104 = FILL_AREA_STYLE_COLOUR('',#270441); +#313105 = STYLED_ITEM('color',(#313106),#100336); +#313106 = PRESENTATION_STYLE_ASSIGNMENT((#313107)); +#313107 = SURFACE_STYLE_USAGE(.BOTH.,#313108); +#313108 = SURFACE_SIDE_STYLE('',(#313109)); +#313109 = SURFACE_STYLE_FILL_AREA(#313110); +#313110 = FILL_AREA_STYLE('',(#313111)); +#313111 = FILL_AREA_STYLE_COLOUR('',#270441); +#313112 = STYLED_ITEM('color',(#313113),#100486); +#313113 = PRESENTATION_STYLE_ASSIGNMENT((#313114)); +#313114 = SURFACE_STYLE_USAGE(.BOTH.,#313115); +#313115 = SURFACE_SIDE_STYLE('',(#313116)); +#313116 = SURFACE_STYLE_FILL_AREA(#313117); +#313117 = FILL_AREA_STYLE('',(#313118)); +#313118 = FILL_AREA_STYLE_COLOUR('',#270441); +#313119 = STYLED_ITEM('color',(#313120),#100503); +#313120 = PRESENTATION_STYLE_ASSIGNMENT((#313121)); +#313121 = SURFACE_STYLE_USAGE(.BOTH.,#313122); +#313122 = SURFACE_SIDE_STYLE('',(#313123)); +#313123 = SURFACE_STYLE_FILL_AREA(#313124); +#313124 = FILL_AREA_STYLE('',(#313125)); +#313125 = FILL_AREA_STYLE_COLOUR('',#270350); +#313126 = STYLED_ITEM('color',(#313127),#100512); +#313127 = PRESENTATION_STYLE_ASSIGNMENT((#313128)); +#313128 = SURFACE_STYLE_USAGE(.BOTH.,#313129); +#313129 = SURFACE_SIDE_STYLE('',(#313130)); +#313130 = SURFACE_STYLE_FILL_AREA(#313131); +#313131 = FILL_AREA_STYLE('',(#313132)); +#313132 = FILL_AREA_STYLE_COLOUR('',#270441); +#313133 = STYLED_ITEM('color',(#313134),#100529); +#313134 = PRESENTATION_STYLE_ASSIGNMENT((#313135)); +#313135 = SURFACE_STYLE_USAGE(.BOTH.,#313136); +#313136 = SURFACE_SIDE_STYLE('',(#313137)); +#313137 = SURFACE_STYLE_FILL_AREA(#313138); +#313138 = FILL_AREA_STYLE('',(#313139)); +#313139 = FILL_AREA_STYLE_COLOUR('',#270441); +#313140 = STYLED_ITEM('color',(#313141),#100546); +#313141 = PRESENTATION_STYLE_ASSIGNMENT((#313142)); +#313142 = SURFACE_STYLE_USAGE(.BOTH.,#313143); +#313143 = SURFACE_SIDE_STYLE('',(#313144)); +#313144 = SURFACE_STYLE_FILL_AREA(#313145); +#313145 = FILL_AREA_STYLE('',(#313146)); +#313146 = FILL_AREA_STYLE_COLOUR('',#270441); +#313147 = STYLED_ITEM('color',(#313148),#100563); +#313148 = PRESENTATION_STYLE_ASSIGNMENT((#313149)); +#313149 = SURFACE_STYLE_USAGE(.BOTH.,#313150); +#313150 = SURFACE_SIDE_STYLE('',(#313151)); +#313151 = SURFACE_STYLE_FILL_AREA(#313152); +#313152 = FILL_AREA_STYLE('',(#313153)); +#313153 = FILL_AREA_STYLE_COLOUR('',#270441); +#313154 = STYLED_ITEM('color',(#313155),#100580); +#313155 = PRESENTATION_STYLE_ASSIGNMENT((#313156)); +#313156 = SURFACE_STYLE_USAGE(.BOTH.,#313157); +#313157 = SURFACE_SIDE_STYLE('',(#313158)); +#313158 = SURFACE_STYLE_FILL_AREA(#313159); +#313159 = FILL_AREA_STYLE('',(#313160)); +#313160 = FILL_AREA_STYLE_COLOUR('',#270441); +#313161 = STYLED_ITEM('color',(#313162),#100602); +#313162 = PRESENTATION_STYLE_ASSIGNMENT((#313163)); +#313163 = SURFACE_STYLE_USAGE(.BOTH.,#313164); +#313164 = SURFACE_SIDE_STYLE('',(#313165)); +#313165 = SURFACE_STYLE_FILL_AREA(#313166); +#313166 = FILL_AREA_STYLE('',(#313167)); +#313167 = FILL_AREA_STYLE_COLOUR('',#270441); +#313168 = STYLED_ITEM('color',(#313169),#100619); +#313169 = PRESENTATION_STYLE_ASSIGNMENT((#313170)); +#313170 = SURFACE_STYLE_USAGE(.BOTH.,#313171); +#313171 = SURFACE_SIDE_STYLE('',(#313172)); +#313172 = SURFACE_STYLE_FILL_AREA(#313173); +#313173 = FILL_AREA_STYLE('',(#313174)); +#313174 = FILL_AREA_STYLE_COLOUR('',#270441); +#313175 = STYLED_ITEM('color',(#313176),#100636); +#313176 = PRESENTATION_STYLE_ASSIGNMENT((#313177)); +#313177 = SURFACE_STYLE_USAGE(.BOTH.,#313178); +#313178 = SURFACE_SIDE_STYLE('',(#313179)); +#313179 = SURFACE_STYLE_FILL_AREA(#313180); +#313180 = FILL_AREA_STYLE('',(#313181)); +#313181 = FILL_AREA_STYLE_COLOUR('',#270441); +#313182 = STYLED_ITEM('color',(#313183),#100653); +#313183 = PRESENTATION_STYLE_ASSIGNMENT((#313184)); +#313184 = SURFACE_STYLE_USAGE(.BOTH.,#313185); +#313185 = SURFACE_SIDE_STYLE('',(#313186)); +#313186 = SURFACE_STYLE_FILL_AREA(#313187); +#313187 = FILL_AREA_STYLE('',(#313188)); +#313188 = FILL_AREA_STYLE_COLOUR('',#270441); +#313189 = STYLED_ITEM('color',(#313190),#100670); +#313190 = PRESENTATION_STYLE_ASSIGNMENT((#313191)); +#313191 = SURFACE_STYLE_USAGE(.BOTH.,#313192); +#313192 = SURFACE_SIDE_STYLE('',(#313193)); +#313193 = SURFACE_STYLE_FILL_AREA(#313194); +#313194 = FILL_AREA_STYLE('',(#313195)); +#313195 = FILL_AREA_STYLE_COLOUR('',#270441); +#313196 = STYLED_ITEM('color',(#313197),#100682); +#313197 = PRESENTATION_STYLE_ASSIGNMENT((#313198)); +#313198 = SURFACE_STYLE_USAGE(.BOTH.,#313199); +#313199 = SURFACE_SIDE_STYLE('',(#313200)); +#313200 = SURFACE_STYLE_FILL_AREA(#313201); +#313201 = FILL_AREA_STYLE('',(#313202)); +#313202 = FILL_AREA_STYLE_COLOUR('',#270441); +#313203 = STYLED_ITEM('color',(#313204),#100699); +#313204 = PRESENTATION_STYLE_ASSIGNMENT((#313205)); +#313205 = SURFACE_STYLE_USAGE(.BOTH.,#313206); +#313206 = SURFACE_SIDE_STYLE('',(#313207)); +#313207 = SURFACE_STYLE_FILL_AREA(#313208); +#313208 = FILL_AREA_STYLE('',(#313209)); +#313209 = FILL_AREA_STYLE_COLOUR('',#270441); +#313210 = STYLED_ITEM('color',(#313211),#100716); +#313211 = PRESENTATION_STYLE_ASSIGNMENT((#313212)); +#313212 = SURFACE_STYLE_USAGE(.BOTH.,#313213); +#313213 = SURFACE_SIDE_STYLE('',(#313214)); +#313214 = SURFACE_STYLE_FILL_AREA(#313215); +#313215 = FILL_AREA_STYLE('',(#313216)); +#313216 = FILL_AREA_STYLE_COLOUR('',#270441); +#313217 = STYLED_ITEM('color',(#313218),#100733); +#313218 = PRESENTATION_STYLE_ASSIGNMENT((#313219)); +#313219 = SURFACE_STYLE_USAGE(.BOTH.,#313220); +#313220 = SURFACE_SIDE_STYLE('',(#313221)); +#313221 = SURFACE_STYLE_FILL_AREA(#313222); +#313222 = FILL_AREA_STYLE('',(#313223)); +#313223 = FILL_AREA_STYLE_COLOUR('',#270441); +#313224 = STYLED_ITEM('color',(#313225),#100750); +#313225 = PRESENTATION_STYLE_ASSIGNMENT((#313226)); +#313226 = SURFACE_STYLE_USAGE(.BOTH.,#313227); +#313227 = SURFACE_SIDE_STYLE('',(#313228)); +#313228 = SURFACE_STYLE_FILL_AREA(#313229); +#313229 = FILL_AREA_STYLE('',(#313230)); +#313230 = FILL_AREA_STYLE_COLOUR('',#270441); +#313231 = STYLED_ITEM('color',(#313232),#100767); +#313232 = PRESENTATION_STYLE_ASSIGNMENT((#313233)); +#313233 = SURFACE_STYLE_USAGE(.BOTH.,#313234); +#313234 = SURFACE_SIDE_STYLE('',(#313235)); +#313235 = SURFACE_STYLE_FILL_AREA(#313236); +#313236 = FILL_AREA_STYLE('',(#313237)); +#313237 = FILL_AREA_STYLE_COLOUR('',#270441); +#313238 = STYLED_ITEM('color',(#313239),#100784); +#313239 = PRESENTATION_STYLE_ASSIGNMENT((#313240)); +#313240 = SURFACE_STYLE_USAGE(.BOTH.,#313241); +#313241 = SURFACE_SIDE_STYLE('',(#313242)); +#313242 = SURFACE_STYLE_FILL_AREA(#313243); +#313243 = FILL_AREA_STYLE('',(#313244)); +#313244 = FILL_AREA_STYLE_COLOUR('',#270441); +#313245 = STYLED_ITEM('color',(#313246),#100801); +#313246 = PRESENTATION_STYLE_ASSIGNMENT((#313247)); +#313247 = SURFACE_STYLE_USAGE(.BOTH.,#313248); +#313248 = SURFACE_SIDE_STYLE('',(#313249)); +#313249 = SURFACE_STYLE_FILL_AREA(#313250); +#313250 = FILL_AREA_STYLE('',(#313251)); +#313251 = FILL_AREA_STYLE_COLOUR('',#270441); +#313252 = STYLED_ITEM('color',(#313253),#100818); +#313253 = PRESENTATION_STYLE_ASSIGNMENT((#313254)); +#313254 = SURFACE_STYLE_USAGE(.BOTH.,#313255); +#313255 = SURFACE_SIDE_STYLE('',(#313256)); +#313256 = SURFACE_STYLE_FILL_AREA(#313257); +#313257 = FILL_AREA_STYLE('',(#313258)); +#313258 = FILL_AREA_STYLE_COLOUR('',#270441); +#313259 = STYLED_ITEM('color',(#313260),#100830); +#313260 = PRESENTATION_STYLE_ASSIGNMENT((#313261)); +#313261 = SURFACE_STYLE_USAGE(.BOTH.,#313262); +#313262 = SURFACE_SIDE_STYLE('',(#313263)); +#313263 = SURFACE_STYLE_FILL_AREA(#313264); +#313264 = FILL_AREA_STYLE('',(#313265)); +#313265 = FILL_AREA_STYLE_COLOUR('',#270441); +#313266 = STYLED_ITEM('color',(#313267),#100852); +#313267 = PRESENTATION_STYLE_ASSIGNMENT((#313268)); +#313268 = SURFACE_STYLE_USAGE(.BOTH.,#313269); +#313269 = SURFACE_SIDE_STYLE('',(#313270)); +#313270 = SURFACE_STYLE_FILL_AREA(#313271); +#313271 = FILL_AREA_STYLE('',(#313272)); +#313272 = FILL_AREA_STYLE_COLOUR('',#270441); +#313273 = STYLED_ITEM('color',(#313274),#100869); +#313274 = PRESENTATION_STYLE_ASSIGNMENT((#313275)); +#313275 = SURFACE_STYLE_USAGE(.BOTH.,#313276); +#313276 = SURFACE_SIDE_STYLE('',(#313277)); +#313277 = SURFACE_STYLE_FILL_AREA(#313278); +#313278 = FILL_AREA_STYLE('',(#313279)); +#313279 = FILL_AREA_STYLE_COLOUR('',#270441); +#313280 = STYLED_ITEM('color',(#313281),#100886); +#313281 = PRESENTATION_STYLE_ASSIGNMENT((#313282)); +#313282 = SURFACE_STYLE_USAGE(.BOTH.,#313283); +#313283 = SURFACE_SIDE_STYLE('',(#313284)); +#313284 = SURFACE_STYLE_FILL_AREA(#313285); +#313285 = FILL_AREA_STYLE('',(#313286)); +#313286 = FILL_AREA_STYLE_COLOUR('',#270441); +#313287 = STYLED_ITEM('color',(#313288),#100903); +#313288 = PRESENTATION_STYLE_ASSIGNMENT((#313289)); +#313289 = SURFACE_STYLE_USAGE(.BOTH.,#313290); +#313290 = SURFACE_SIDE_STYLE('',(#313291)); +#313291 = SURFACE_STYLE_FILL_AREA(#313292); +#313292 = FILL_AREA_STYLE('',(#313293)); +#313293 = FILL_AREA_STYLE_COLOUR('',#270441); +#313294 = STYLED_ITEM('color',(#313295),#100920); +#313295 = PRESENTATION_STYLE_ASSIGNMENT((#313296)); +#313296 = SURFACE_STYLE_USAGE(.BOTH.,#313297); +#313297 = SURFACE_SIDE_STYLE('',(#313298)); +#313298 = SURFACE_STYLE_FILL_AREA(#313299); +#313299 = FILL_AREA_STYLE('',(#313300)); +#313300 = FILL_AREA_STYLE_COLOUR('',#270441); +#313301 = STYLED_ITEM('color',(#313302),#100932); +#313302 = PRESENTATION_STYLE_ASSIGNMENT((#313303)); +#313303 = SURFACE_STYLE_USAGE(.BOTH.,#313304); +#313304 = SURFACE_SIDE_STYLE('',(#313305)); +#313305 = SURFACE_STYLE_FILL_AREA(#313306); +#313306 = FILL_AREA_STYLE('',(#313307)); +#313307 = FILL_AREA_STYLE_COLOUR('',#270441); +#313308 = STYLED_ITEM('color',(#313309),#100949); +#313309 = PRESENTATION_STYLE_ASSIGNMENT((#313310)); +#313310 = SURFACE_STYLE_USAGE(.BOTH.,#313311); +#313311 = SURFACE_SIDE_STYLE('',(#313312)); +#313312 = SURFACE_STYLE_FILL_AREA(#313313); +#313313 = FILL_AREA_STYLE('',(#313314)); +#313314 = FILL_AREA_STYLE_COLOUR('',#270441); +#313315 = STYLED_ITEM('color',(#313316),#100966); +#313316 = PRESENTATION_STYLE_ASSIGNMENT((#313317)); +#313317 = SURFACE_STYLE_USAGE(.BOTH.,#313318); +#313318 = SURFACE_SIDE_STYLE('',(#313319)); +#313319 = SURFACE_STYLE_FILL_AREA(#313320); +#313320 = FILL_AREA_STYLE('',(#313321)); +#313321 = FILL_AREA_STYLE_COLOUR('',#270441); +#313322 = STYLED_ITEM('color',(#313323),#100983); +#313323 = PRESENTATION_STYLE_ASSIGNMENT((#313324)); +#313324 = SURFACE_STYLE_USAGE(.BOTH.,#313325); +#313325 = SURFACE_SIDE_STYLE('',(#313326)); +#313326 = SURFACE_STYLE_FILL_AREA(#313327); +#313327 = FILL_AREA_STYLE('',(#313328)); +#313328 = FILL_AREA_STYLE_COLOUR('',#270441); +#313329 = STYLED_ITEM('color',(#313330),#101000); +#313330 = PRESENTATION_STYLE_ASSIGNMENT((#313331)); +#313331 = SURFACE_STYLE_USAGE(.BOTH.,#313332); +#313332 = SURFACE_SIDE_STYLE('',(#313333)); +#313333 = SURFACE_STYLE_FILL_AREA(#313334); +#313334 = FILL_AREA_STYLE('',(#313335)); +#313335 = FILL_AREA_STYLE_COLOUR('',#270441); +#313336 = STYLED_ITEM('color',(#313337),#101017); +#313337 = PRESENTATION_STYLE_ASSIGNMENT((#313338)); +#313338 = SURFACE_STYLE_USAGE(.BOTH.,#313339); +#313339 = SURFACE_SIDE_STYLE('',(#313340)); +#313340 = SURFACE_STYLE_FILL_AREA(#313341); +#313341 = FILL_AREA_STYLE('',(#313342)); +#313342 = FILL_AREA_STYLE_COLOUR('',#270441); +#313343 = STYLED_ITEM('color',(#313344),#101034); +#313344 = PRESENTATION_STYLE_ASSIGNMENT((#313345)); +#313345 = SURFACE_STYLE_USAGE(.BOTH.,#313346); +#313346 = SURFACE_SIDE_STYLE('',(#313347)); +#313347 = SURFACE_STYLE_FILL_AREA(#313348); +#313348 = FILL_AREA_STYLE('',(#313349)); +#313349 = FILL_AREA_STYLE_COLOUR('',#270441); +#313350 = STYLED_ITEM('color',(#313351),#101051); +#313351 = PRESENTATION_STYLE_ASSIGNMENT((#313352)); +#313352 = SURFACE_STYLE_USAGE(.BOTH.,#313353); +#313353 = SURFACE_SIDE_STYLE('',(#313354)); +#313354 = SURFACE_STYLE_FILL_AREA(#313355); +#313355 = FILL_AREA_STYLE('',(#313356)); +#313356 = FILL_AREA_STYLE_COLOUR('',#270441); +#313357 = STYLED_ITEM('color',(#313358),#101068); +#313358 = PRESENTATION_STYLE_ASSIGNMENT((#313359)); +#313359 = SURFACE_STYLE_USAGE(.BOTH.,#313360); +#313360 = SURFACE_SIDE_STYLE('',(#313361)); +#313361 = SURFACE_STYLE_FILL_AREA(#313362); +#313362 = FILL_AREA_STYLE('',(#313363)); +#313363 = FILL_AREA_STYLE_COLOUR('',#270441); +#313364 = STYLED_ITEM('color',(#313365),#101080); +#313365 = PRESENTATION_STYLE_ASSIGNMENT((#313366)); +#313366 = SURFACE_STYLE_USAGE(.BOTH.,#313367); +#313367 = SURFACE_SIDE_STYLE('',(#313368)); +#313368 = SURFACE_STYLE_FILL_AREA(#313369); +#313369 = FILL_AREA_STYLE('',(#313370)); +#313370 = FILL_AREA_STYLE_COLOUR('',#270441); +#313371 = STYLED_ITEM('color',(#313372),#101102); +#313372 = PRESENTATION_STYLE_ASSIGNMENT((#313373)); +#313373 = SURFACE_STYLE_USAGE(.BOTH.,#313374); +#313374 = SURFACE_SIDE_STYLE('',(#313375)); +#313375 = SURFACE_STYLE_FILL_AREA(#313376); +#313376 = FILL_AREA_STYLE('',(#313377)); +#313377 = FILL_AREA_STYLE_COLOUR('',#270441); +#313378 = STYLED_ITEM('color',(#313379),#101119); +#313379 = PRESENTATION_STYLE_ASSIGNMENT((#313380)); +#313380 = SURFACE_STYLE_USAGE(.BOTH.,#313381); +#313381 = SURFACE_SIDE_STYLE('',(#313382)); +#313382 = SURFACE_STYLE_FILL_AREA(#313383); +#313383 = FILL_AREA_STYLE('',(#313384)); +#313384 = FILL_AREA_STYLE_COLOUR('',#270441); +#313385 = STYLED_ITEM('color',(#313386),#101136); +#313386 = PRESENTATION_STYLE_ASSIGNMENT((#313387)); +#313387 = SURFACE_STYLE_USAGE(.BOTH.,#313388); +#313388 = SURFACE_SIDE_STYLE('',(#313389)); +#313389 = SURFACE_STYLE_FILL_AREA(#313390); +#313390 = FILL_AREA_STYLE('',(#313391)); +#313391 = FILL_AREA_STYLE_COLOUR('',#270441); +#313392 = STYLED_ITEM('color',(#313393),#101153); +#313393 = PRESENTATION_STYLE_ASSIGNMENT((#313394)); +#313394 = SURFACE_STYLE_USAGE(.BOTH.,#313395); +#313395 = SURFACE_SIDE_STYLE('',(#313396)); +#313396 = SURFACE_STYLE_FILL_AREA(#313397); +#313397 = FILL_AREA_STYLE('',(#313398)); +#313398 = FILL_AREA_STYLE_COLOUR('',#270441); +#313399 = STYLED_ITEM('color',(#313400),#101170); +#313400 = PRESENTATION_STYLE_ASSIGNMENT((#313401)); +#313401 = SURFACE_STYLE_USAGE(.BOTH.,#313402); +#313402 = SURFACE_SIDE_STYLE('',(#313403)); +#313403 = SURFACE_STYLE_FILL_AREA(#313404); +#313404 = FILL_AREA_STYLE('',(#313405)); +#313405 = FILL_AREA_STYLE_COLOUR('',#270441); +#313406 = STYLED_ITEM('color',(#313407),#101182); +#313407 = PRESENTATION_STYLE_ASSIGNMENT((#313408)); +#313408 = SURFACE_STYLE_USAGE(.BOTH.,#313409); +#313409 = SURFACE_SIDE_STYLE('',(#313410)); +#313410 = SURFACE_STYLE_FILL_AREA(#313411); +#313411 = FILL_AREA_STYLE('',(#313412)); +#313412 = FILL_AREA_STYLE_COLOUR('',#270441); +#313413 = STYLED_ITEM('color',(#313414),#101199); +#313414 = PRESENTATION_STYLE_ASSIGNMENT((#313415)); +#313415 = SURFACE_STYLE_USAGE(.BOTH.,#313416); +#313416 = SURFACE_SIDE_STYLE('',(#313417)); +#313417 = SURFACE_STYLE_FILL_AREA(#313418); +#313418 = FILL_AREA_STYLE('',(#313419)); +#313419 = FILL_AREA_STYLE_COLOUR('',#270441); +#313420 = STYLED_ITEM('color',(#313421),#101216); +#313421 = PRESENTATION_STYLE_ASSIGNMENT((#313422)); +#313422 = SURFACE_STYLE_USAGE(.BOTH.,#313423); +#313423 = SURFACE_SIDE_STYLE('',(#313424)); +#313424 = SURFACE_STYLE_FILL_AREA(#313425); +#313425 = FILL_AREA_STYLE('',(#313426)); +#313426 = FILL_AREA_STYLE_COLOUR('',#270441); +#313427 = STYLED_ITEM('color',(#313428),#101233); +#313428 = PRESENTATION_STYLE_ASSIGNMENT((#313429)); +#313429 = SURFACE_STYLE_USAGE(.BOTH.,#313430); +#313430 = SURFACE_SIDE_STYLE('',(#313431)); +#313431 = SURFACE_STYLE_FILL_AREA(#313432); +#313432 = FILL_AREA_STYLE('',(#313433)); +#313433 = FILL_AREA_STYLE_COLOUR('',#270441); +#313434 = STYLED_ITEM('color',(#313435),#101250); +#313435 = PRESENTATION_STYLE_ASSIGNMENT((#313436)); +#313436 = SURFACE_STYLE_USAGE(.BOTH.,#313437); +#313437 = SURFACE_SIDE_STYLE('',(#313438)); +#313438 = SURFACE_STYLE_FILL_AREA(#313439); +#313439 = FILL_AREA_STYLE('',(#313440)); +#313440 = FILL_AREA_STYLE_COLOUR('',#270441); +#313441 = STYLED_ITEM('color',(#313442),#101267); +#313442 = PRESENTATION_STYLE_ASSIGNMENT((#313443)); +#313443 = SURFACE_STYLE_USAGE(.BOTH.,#313444); +#313444 = SURFACE_SIDE_STYLE('',(#313445)); +#313445 = SURFACE_STYLE_FILL_AREA(#313446); +#313446 = FILL_AREA_STYLE('',(#313447)); +#313447 = FILL_AREA_STYLE_COLOUR('',#270441); +#313448 = STYLED_ITEM('color',(#313449),#101284); +#313449 = PRESENTATION_STYLE_ASSIGNMENT((#313450)); +#313450 = SURFACE_STYLE_USAGE(.BOTH.,#313451); +#313451 = SURFACE_SIDE_STYLE('',(#313452)); +#313452 = SURFACE_STYLE_FILL_AREA(#313453); +#313453 = FILL_AREA_STYLE('',(#313454)); +#313454 = FILL_AREA_STYLE_COLOUR('',#270441); +#313455 = STYLED_ITEM('color',(#313456),#101301); +#313456 = PRESENTATION_STYLE_ASSIGNMENT((#313457)); +#313457 = SURFACE_STYLE_USAGE(.BOTH.,#313458); +#313458 = SURFACE_SIDE_STYLE('',(#313459)); +#313459 = SURFACE_STYLE_FILL_AREA(#313460); +#313460 = FILL_AREA_STYLE('',(#313461)); +#313461 = FILL_AREA_STYLE_COLOUR('',#270441); +#313462 = STYLED_ITEM('color',(#313463),#101318); +#313463 = PRESENTATION_STYLE_ASSIGNMENT((#313464)); +#313464 = SURFACE_STYLE_USAGE(.BOTH.,#313465); +#313465 = SURFACE_SIDE_STYLE('',(#313466)); +#313466 = SURFACE_STYLE_FILL_AREA(#313467); +#313467 = FILL_AREA_STYLE('',(#313468)); +#313468 = FILL_AREA_STYLE_COLOUR('',#270441); +#313469 = STYLED_ITEM('color',(#313470),#101330); +#313470 = PRESENTATION_STYLE_ASSIGNMENT((#313471)); +#313471 = SURFACE_STYLE_USAGE(.BOTH.,#313472); +#313472 = SURFACE_SIDE_STYLE('',(#313473)); +#313473 = SURFACE_STYLE_FILL_AREA(#313474); +#313474 = FILL_AREA_STYLE('',(#313475)); +#313475 = FILL_AREA_STYLE_COLOUR('',#270441); +#313476 = STYLED_ITEM('color',(#313477),#101352); +#313477 = PRESENTATION_STYLE_ASSIGNMENT((#313478)); +#313478 = SURFACE_STYLE_USAGE(.BOTH.,#313479); +#313479 = SURFACE_SIDE_STYLE('',(#313480)); +#313480 = SURFACE_STYLE_FILL_AREA(#313481); +#313481 = FILL_AREA_STYLE('',(#313482)); +#313482 = FILL_AREA_STYLE_COLOUR('',#270441); +#313483 = STYLED_ITEM('color',(#313484),#101369); +#313484 = PRESENTATION_STYLE_ASSIGNMENT((#313485)); +#313485 = SURFACE_STYLE_USAGE(.BOTH.,#313486); +#313486 = SURFACE_SIDE_STYLE('',(#313487)); +#313487 = SURFACE_STYLE_FILL_AREA(#313488); +#313488 = FILL_AREA_STYLE('',(#313489)); +#313489 = FILL_AREA_STYLE_COLOUR('',#270441); +#313490 = STYLED_ITEM('color',(#313491),#101386); +#313491 = PRESENTATION_STYLE_ASSIGNMENT((#313492)); +#313492 = SURFACE_STYLE_USAGE(.BOTH.,#313493); +#313493 = SURFACE_SIDE_STYLE('',(#313494)); +#313494 = SURFACE_STYLE_FILL_AREA(#313495); +#313495 = FILL_AREA_STYLE('',(#313496)); +#313496 = FILL_AREA_STYLE_COLOUR('',#270441); +#313497 = STYLED_ITEM('color',(#313498),#101403); +#313498 = PRESENTATION_STYLE_ASSIGNMENT((#313499)); +#313499 = SURFACE_STYLE_USAGE(.BOTH.,#313500); +#313500 = SURFACE_SIDE_STYLE('',(#313501)); +#313501 = SURFACE_STYLE_FILL_AREA(#313502); +#313502 = FILL_AREA_STYLE('',(#313503)); +#313503 = FILL_AREA_STYLE_COLOUR('',#270441); +#313504 = STYLED_ITEM('color',(#313505),#101420); +#313505 = PRESENTATION_STYLE_ASSIGNMENT((#313506)); +#313506 = SURFACE_STYLE_USAGE(.BOTH.,#313507); +#313507 = SURFACE_SIDE_STYLE('',(#313508)); +#313508 = SURFACE_STYLE_FILL_AREA(#313509); +#313509 = FILL_AREA_STYLE('',(#313510)); +#313510 = FILL_AREA_STYLE_COLOUR('',#270441); +#313511 = STYLED_ITEM('color',(#313512),#101432); +#313512 = PRESENTATION_STYLE_ASSIGNMENT((#313513)); +#313513 = SURFACE_STYLE_USAGE(.BOTH.,#313514); +#313514 = SURFACE_SIDE_STYLE('',(#313515)); +#313515 = SURFACE_STYLE_FILL_AREA(#313516); +#313516 = FILL_AREA_STYLE('',(#313517)); +#313517 = FILL_AREA_STYLE_COLOUR('',#270441); +#313518 = STYLED_ITEM('color',(#313519),#101449); +#313519 = PRESENTATION_STYLE_ASSIGNMENT((#313520)); +#313520 = SURFACE_STYLE_USAGE(.BOTH.,#313521); +#313521 = SURFACE_SIDE_STYLE('',(#313522)); +#313522 = SURFACE_STYLE_FILL_AREA(#313523); +#313523 = FILL_AREA_STYLE('',(#313524)); +#313524 = FILL_AREA_STYLE_COLOUR('',#270441); +#313525 = STYLED_ITEM('color',(#313526),#101466); +#313526 = PRESENTATION_STYLE_ASSIGNMENT((#313527)); +#313527 = SURFACE_STYLE_USAGE(.BOTH.,#313528); +#313528 = SURFACE_SIDE_STYLE('',(#313529)); +#313529 = SURFACE_STYLE_FILL_AREA(#313530); +#313530 = FILL_AREA_STYLE('',(#313531)); +#313531 = FILL_AREA_STYLE_COLOUR('',#270441); +#313532 = STYLED_ITEM('color',(#313533),#101483); +#313533 = PRESENTATION_STYLE_ASSIGNMENT((#313534)); +#313534 = SURFACE_STYLE_USAGE(.BOTH.,#313535); +#313535 = SURFACE_SIDE_STYLE('',(#313536)); +#313536 = SURFACE_STYLE_FILL_AREA(#313537); +#313537 = FILL_AREA_STYLE('',(#313538)); +#313538 = FILL_AREA_STYLE_COLOUR('',#270441); +#313539 = STYLED_ITEM('color',(#313540),#101500); +#313540 = PRESENTATION_STYLE_ASSIGNMENT((#313541)); +#313541 = SURFACE_STYLE_USAGE(.BOTH.,#313542); +#313542 = SURFACE_SIDE_STYLE('',(#313543)); +#313543 = SURFACE_STYLE_FILL_AREA(#313544); +#313544 = FILL_AREA_STYLE('',(#313545)); +#313545 = FILL_AREA_STYLE_COLOUR('',#270441); +#313546 = STYLED_ITEM('color',(#313547),#101517); +#313547 = PRESENTATION_STYLE_ASSIGNMENT((#313548)); +#313548 = SURFACE_STYLE_USAGE(.BOTH.,#313549); +#313549 = SURFACE_SIDE_STYLE('',(#313550)); +#313550 = SURFACE_STYLE_FILL_AREA(#313551); +#313551 = FILL_AREA_STYLE('',(#313552)); +#313552 = FILL_AREA_STYLE_COLOUR('',#270441); +#313553 = STYLED_ITEM('color',(#313554),#101534); +#313554 = PRESENTATION_STYLE_ASSIGNMENT((#313555)); +#313555 = SURFACE_STYLE_USAGE(.BOTH.,#313556); +#313556 = SURFACE_SIDE_STYLE('',(#313557)); +#313557 = SURFACE_STYLE_FILL_AREA(#313558); +#313558 = FILL_AREA_STYLE('',(#313559)); +#313559 = FILL_AREA_STYLE_COLOUR('',#270441); +#313560 = STYLED_ITEM('color',(#313561),#101551); +#313561 = PRESENTATION_STYLE_ASSIGNMENT((#313562)); +#313562 = SURFACE_STYLE_USAGE(.BOTH.,#313563); +#313563 = SURFACE_SIDE_STYLE('',(#313564)); +#313564 = SURFACE_STYLE_FILL_AREA(#313565); +#313565 = FILL_AREA_STYLE('',(#313566)); +#313566 = FILL_AREA_STYLE_COLOUR('',#270441); +#313567 = STYLED_ITEM('color',(#313568),#101568); +#313568 = PRESENTATION_STYLE_ASSIGNMENT((#313569)); +#313569 = SURFACE_STYLE_USAGE(.BOTH.,#313570); +#313570 = SURFACE_SIDE_STYLE('',(#313571)); +#313571 = SURFACE_STYLE_FILL_AREA(#313572); +#313572 = FILL_AREA_STYLE('',(#313573)); +#313573 = FILL_AREA_STYLE_COLOUR('',#270441); +#313574 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #313575,#313582,#313589,#313596,#313603,#313610,#313617,#313624, + #313631,#313638,#313645,#313652,#313659,#313666,#313673,#313680, + #313687,#313694,#313701,#313708,#313715,#313722,#313729,#313736, + #313743,#313750,#313757,#313764,#313771,#313778,#313785,#313792, + #313799,#313806,#313813,#313820,#313827,#313834,#313841,#313848, + #313855),#90367); +#313575 = STYLED_ITEM('color',(#313576),#89004); +#313576 = PRESENTATION_STYLE_ASSIGNMENT((#313577)); +#313577 = SURFACE_STYLE_USAGE(.BOTH.,#313578); +#313578 = SURFACE_SIDE_STYLE('',(#313579)); +#313579 = SURFACE_STYLE_FILL_AREA(#313580); +#313580 = FILL_AREA_STYLE('',(#313581)); +#313581 = FILL_AREA_STYLE_COLOUR('',#270441); +#313582 = STYLED_ITEM('color',(#313583),#89047); +#313583 = PRESENTATION_STYLE_ASSIGNMENT((#313584)); +#313584 = SURFACE_STYLE_USAGE(.BOTH.,#313585); +#313585 = SURFACE_SIDE_STYLE('',(#313586)); +#313586 = SURFACE_STYLE_FILL_AREA(#313587); +#313587 = FILL_AREA_STYLE('',(#313588)); +#313588 = FILL_AREA_STYLE_COLOUR('',#270441); +#313589 = STYLED_ITEM('color',(#313590),#89073); +#313590 = PRESENTATION_STYLE_ASSIGNMENT((#313591)); +#313591 = SURFACE_STYLE_USAGE(.BOTH.,#313592); +#313592 = SURFACE_SIDE_STYLE('',(#313593)); +#313593 = SURFACE_STYLE_FILL_AREA(#313594); +#313594 = FILL_AREA_STYLE('',(#313595)); +#313595 = FILL_AREA_STYLE_COLOUR('',#270441); +#313596 = STYLED_ITEM('color',(#313597),#89146); +#313597 = PRESENTATION_STYLE_ASSIGNMENT((#313598)); +#313598 = SURFACE_STYLE_USAGE(.BOTH.,#313599); +#313599 = SURFACE_SIDE_STYLE('',(#313600)); +#313600 = SURFACE_STYLE_FILL_AREA(#313601); +#313601 = FILL_AREA_STYLE('',(#313602)); +#313602 = FILL_AREA_STYLE_COLOUR('',#270350); +#313603 = STYLED_ITEM('color',(#313604),#89225); +#313604 = PRESENTATION_STYLE_ASSIGNMENT((#313605)); +#313605 = SURFACE_STYLE_USAGE(.BOTH.,#313606); +#313606 = SURFACE_SIDE_STYLE('',(#313607)); +#313607 = SURFACE_STYLE_FILL_AREA(#313608); +#313608 = FILL_AREA_STYLE('',(#313609)); +#313609 = FILL_AREA_STYLE_COLOUR('',#270441); +#313610 = STYLED_ITEM('color',(#313611),#89265); +#313611 = PRESENTATION_STYLE_ASSIGNMENT((#313612)); +#313612 = SURFACE_STYLE_USAGE(.BOTH.,#313613); +#313613 = SURFACE_SIDE_STYLE('',(#313614)); +#313614 = SURFACE_STYLE_FILL_AREA(#313615); +#313615 = FILL_AREA_STYLE('',(#313616)); +#313616 = FILL_AREA_STYLE_COLOUR('',#270350); +#313617 = STYLED_ITEM('color',(#313618),#89344); +#313618 = PRESENTATION_STYLE_ASSIGNMENT((#313619)); +#313619 = SURFACE_STYLE_USAGE(.BOTH.,#313620); +#313620 = SURFACE_SIDE_STYLE('',(#313621)); +#313621 = SURFACE_STYLE_FILL_AREA(#313622); +#313622 = FILL_AREA_STYLE('',(#313623)); +#313623 = FILL_AREA_STYLE_COLOUR('',#270350); +#313624 = STYLED_ITEM('color',(#313625),#89369); +#313625 = PRESENTATION_STYLE_ASSIGNMENT((#313626)); +#313626 = SURFACE_STYLE_USAGE(.BOTH.,#313627); +#313627 = SURFACE_SIDE_STYLE('',(#313628)); +#313628 = SURFACE_STYLE_FILL_AREA(#313629); +#313629 = FILL_AREA_STYLE('',(#313630)); +#313630 = FILL_AREA_STYLE_COLOUR('',#270350); +#313631 = STYLED_ITEM('color',(#313632),#89394); +#313632 = PRESENTATION_STYLE_ASSIGNMENT((#313633)); +#313633 = SURFACE_STYLE_USAGE(.BOTH.,#313634); +#313634 = SURFACE_SIDE_STYLE('',(#313635)); +#313635 = SURFACE_STYLE_FILL_AREA(#313636); +#313636 = FILL_AREA_STYLE('',(#313637)); +#313637 = FILL_AREA_STYLE_COLOUR('',#270350); +#313638 = STYLED_ITEM('color',(#313639),#89450); +#313639 = PRESENTATION_STYLE_ASSIGNMENT((#313640)); +#313640 = SURFACE_STYLE_USAGE(.BOTH.,#313641); +#313641 = SURFACE_SIDE_STYLE('',(#313642)); +#313642 = SURFACE_STYLE_FILL_AREA(#313643); +#313643 = FILL_AREA_STYLE('',(#313644)); +#313644 = FILL_AREA_STYLE_COLOUR('',#270350); +#313645 = STYLED_ITEM('color',(#313646),#89506); +#313646 = PRESENTATION_STYLE_ASSIGNMENT((#313647)); +#313647 = SURFACE_STYLE_USAGE(.BOTH.,#313648); +#313648 = SURFACE_SIDE_STYLE('',(#313649)); +#313649 = SURFACE_STYLE_FILL_AREA(#313650); +#313650 = FILL_AREA_STYLE('',(#313651)); +#313651 = FILL_AREA_STYLE_COLOUR('',#270350); +#313652 = STYLED_ITEM('color',(#313653),#89531); +#313653 = PRESENTATION_STYLE_ASSIGNMENT((#313654)); +#313654 = SURFACE_STYLE_USAGE(.BOTH.,#313655); +#313655 = SURFACE_SIDE_STYLE('',(#313656)); +#313656 = SURFACE_STYLE_FILL_AREA(#313657); +#313657 = FILL_AREA_STYLE('',(#313658)); +#313658 = FILL_AREA_STYLE_COLOUR('',#270350); +#313659 = STYLED_ITEM('color',(#313660),#89556); +#313660 = PRESENTATION_STYLE_ASSIGNMENT((#313661)); +#313661 = SURFACE_STYLE_USAGE(.BOTH.,#313662); +#313662 = SURFACE_SIDE_STYLE('',(#313663)); +#313663 = SURFACE_STYLE_FILL_AREA(#313664); +#313664 = FILL_AREA_STYLE('',(#313665)); +#313665 = FILL_AREA_STYLE_COLOUR('',#270350); +#313666 = STYLED_ITEM('color',(#313667),#89621); +#313667 = PRESENTATION_STYLE_ASSIGNMENT((#313668)); +#313668 = SURFACE_STYLE_USAGE(.BOTH.,#313669); +#313669 = SURFACE_SIDE_STYLE('',(#313670)); +#313670 = SURFACE_STYLE_FILL_AREA(#313671); +#313671 = FILL_AREA_STYLE('',(#313672)); +#313672 = FILL_AREA_STYLE_COLOUR('',#270441); +#313673 = STYLED_ITEM('color',(#313674),#89694); +#313674 = PRESENTATION_STYLE_ASSIGNMENT((#313675)); +#313675 = SURFACE_STYLE_USAGE(.BOTH.,#313676); +#313676 = SURFACE_SIDE_STYLE('',(#313677)); +#313677 = SURFACE_STYLE_FILL_AREA(#313678); +#313678 = FILL_AREA_STYLE('',(#313679)); +#313679 = FILL_AREA_STYLE_COLOUR('',#270350); +#313680 = STYLED_ITEM('color',(#313681),#89780); +#313681 = PRESENTATION_STYLE_ASSIGNMENT((#313682)); +#313682 = SURFACE_STYLE_USAGE(.BOTH.,#313683); +#313683 = SURFACE_SIDE_STYLE('',(#313684)); +#313684 = SURFACE_STYLE_FILL_AREA(#313685); +#313685 = FILL_AREA_STYLE('',(#313686)); +#313686 = FILL_AREA_STYLE_COLOUR('',#270350); +#313687 = STYLED_ITEM('color',(#313688),#89797); +#313688 = PRESENTATION_STYLE_ASSIGNMENT((#313689)); +#313689 = SURFACE_STYLE_USAGE(.BOTH.,#313690); +#313690 = SURFACE_SIDE_STYLE('',(#313691)); +#313691 = SURFACE_STYLE_FILL_AREA(#313692); +#313692 = FILL_AREA_STYLE('',(#313693)); +#313693 = FILL_AREA_STYLE_COLOUR('',#270441); +#313694 = STYLED_ITEM('color',(#313695),#89828); +#313695 = PRESENTATION_STYLE_ASSIGNMENT((#313696)); +#313696 = SURFACE_STYLE_USAGE(.BOTH.,#313697); +#313697 = SURFACE_SIDE_STYLE('',(#313698)); +#313698 = SURFACE_STYLE_FILL_AREA(#313699); +#313699 = FILL_AREA_STYLE('',(#313700)); +#313700 = FILL_AREA_STYLE_COLOUR('',#270350); +#313701 = STYLED_ITEM('color',(#313702),#89840); +#313702 = PRESENTATION_STYLE_ASSIGNMENT((#313703)); +#313703 = SURFACE_STYLE_USAGE(.BOTH.,#313704); +#313704 = SURFACE_SIDE_STYLE('',(#313705)); +#313705 = SURFACE_STYLE_FILL_AREA(#313706); +#313706 = FILL_AREA_STYLE('',(#313707)); +#313707 = FILL_AREA_STYLE_COLOUR('',#270350); +#313708 = STYLED_ITEM('color',(#313709),#89857); +#313709 = PRESENTATION_STYLE_ASSIGNMENT((#313710)); +#313710 = SURFACE_STYLE_USAGE(.BOTH.,#313711); +#313711 = SURFACE_SIDE_STYLE('',(#313712)); +#313712 = SURFACE_STYLE_FILL_AREA(#313713); +#313713 = FILL_AREA_STYLE('',(#313714)); +#313714 = FILL_AREA_STYLE_COLOUR('',#270350); +#313715 = STYLED_ITEM('color',(#313716),#89869); +#313716 = PRESENTATION_STYLE_ASSIGNMENT((#313717)); +#313717 = SURFACE_STYLE_USAGE(.BOTH.,#313718); +#313718 = SURFACE_SIDE_STYLE('',(#313719)); +#313719 = SURFACE_STYLE_FILL_AREA(#313720); +#313720 = FILL_AREA_STYLE('',(#313721)); +#313721 = FILL_AREA_STYLE_COLOUR('',#270350); +#313722 = STYLED_ITEM('color',(#313723),#89887); +#313723 = PRESENTATION_STYLE_ASSIGNMENT((#313724)); +#313724 = SURFACE_STYLE_USAGE(.BOTH.,#313725); +#313725 = SURFACE_SIDE_STYLE('',(#313726)); +#313726 = SURFACE_STYLE_FILL_AREA(#313727); +#313727 = FILL_AREA_STYLE('',(#313728)); +#313728 = FILL_AREA_STYLE_COLOUR('',#270350); +#313729 = STYLED_ITEM('color',(#313730),#89899); +#313730 = PRESENTATION_STYLE_ASSIGNMENT((#313731)); +#313731 = SURFACE_STYLE_USAGE(.BOTH.,#313732); +#313732 = SURFACE_SIDE_STYLE('',(#313733)); +#313733 = SURFACE_STYLE_FILL_AREA(#313734); +#313734 = FILL_AREA_STYLE('',(#313735)); +#313735 = FILL_AREA_STYLE_COLOUR('',#270350); +#313736 = STYLED_ITEM('color',(#313737),#89917); +#313737 = PRESENTATION_STYLE_ASSIGNMENT((#313738)); +#313738 = SURFACE_STYLE_USAGE(.BOTH.,#313739); +#313739 = SURFACE_SIDE_STYLE('',(#313740)); +#313740 = SURFACE_STYLE_FILL_AREA(#313741); +#313741 = FILL_AREA_STYLE('',(#313742)); +#313742 = FILL_AREA_STYLE_COLOUR('',#270350); +#313743 = STYLED_ITEM('color',(#313744),#89929); +#313744 = PRESENTATION_STYLE_ASSIGNMENT((#313745)); +#313745 = SURFACE_STYLE_USAGE(.BOTH.,#313746); +#313746 = SURFACE_SIDE_STYLE('',(#313747)); +#313747 = SURFACE_STYLE_FILL_AREA(#313748); +#313748 = FILL_AREA_STYLE('',(#313749)); +#313749 = FILL_AREA_STYLE_COLOUR('',#270441); +#313750 = STYLED_ITEM('color',(#313751),#89960); +#313751 = PRESENTATION_STYLE_ASSIGNMENT((#313752)); +#313752 = SURFACE_STYLE_USAGE(.BOTH.,#313753); +#313753 = SURFACE_SIDE_STYLE('',(#313754)); +#313754 = SURFACE_STYLE_FILL_AREA(#313755); +#313755 = FILL_AREA_STYLE('',(#313756)); +#313756 = FILL_AREA_STYLE_COLOUR('',#270441); +#313757 = STYLED_ITEM('color',(#313758),#90012); +#313758 = PRESENTATION_STYLE_ASSIGNMENT((#313759)); +#313759 = SURFACE_STYLE_USAGE(.BOTH.,#313760); +#313760 = SURFACE_SIDE_STYLE('',(#313761)); +#313761 = SURFACE_STYLE_FILL_AREA(#313762); +#313762 = FILL_AREA_STYLE('',(#313763)); +#313763 = FILL_AREA_STYLE_COLOUR('',#270441); +#313764 = STYLED_ITEM('color',(#313765),#90044); +#313765 = PRESENTATION_STYLE_ASSIGNMENT((#313766)); +#313766 = SURFACE_STYLE_USAGE(.BOTH.,#313767); +#313767 = SURFACE_SIDE_STYLE('',(#313768)); +#313768 = SURFACE_STYLE_FILL_AREA(#313769); +#313769 = FILL_AREA_STYLE('',(#313770)); +#313770 = FILL_AREA_STYLE_COLOUR('',#270441); +#313771 = STYLED_ITEM('color',(#313772),#90069); +#313772 = PRESENTATION_STYLE_ASSIGNMENT((#313773)); +#313773 = SURFACE_STYLE_USAGE(.BOTH.,#313774); +#313774 = SURFACE_SIDE_STYLE('',(#313775)); +#313775 = SURFACE_STYLE_FILL_AREA(#313776); +#313776 = FILL_AREA_STYLE('',(#313777)); +#313777 = FILL_AREA_STYLE_COLOUR('',#270441); +#313778 = STYLED_ITEM('color',(#313779),#90094); +#313779 = PRESENTATION_STYLE_ASSIGNMENT((#313780)); +#313780 = SURFACE_STYLE_USAGE(.BOTH.,#313781); +#313781 = SURFACE_SIDE_STYLE('',(#313782)); +#313782 = SURFACE_STYLE_FILL_AREA(#313783); +#313783 = FILL_AREA_STYLE('',(#313784)); +#313784 = FILL_AREA_STYLE_COLOUR('',#270441); +#313785 = STYLED_ITEM('color',(#313786),#90126); +#313786 = PRESENTATION_STYLE_ASSIGNMENT((#313787)); +#313787 = SURFACE_STYLE_USAGE(.BOTH.,#313788); +#313788 = SURFACE_SIDE_STYLE('',(#313789)); +#313789 = SURFACE_STYLE_FILL_AREA(#313790); +#313790 = FILL_AREA_STYLE('',(#313791)); +#313791 = FILL_AREA_STYLE_COLOUR('',#270441); +#313792 = STYLED_ITEM('color',(#313793),#90151); +#313793 = PRESENTATION_STYLE_ASSIGNMENT((#313794)); +#313794 = SURFACE_STYLE_USAGE(.BOTH.,#313795); +#313795 = SURFACE_SIDE_STYLE('',(#313796)); +#313796 = SURFACE_STYLE_FILL_AREA(#313797); +#313797 = FILL_AREA_STYLE('',(#313798)); +#313798 = FILL_AREA_STYLE_COLOUR('',#270441); +#313799 = STYLED_ITEM('color',(#313800),#90176); +#313800 = PRESENTATION_STYLE_ASSIGNMENT((#313801)); +#313801 = SURFACE_STYLE_USAGE(.BOTH.,#313802); +#313802 = SURFACE_SIDE_STYLE('',(#313803)); +#313803 = SURFACE_STYLE_FILL_AREA(#313804); +#313804 = FILL_AREA_STYLE('',(#313805)); +#313805 = FILL_AREA_STYLE_COLOUR('',#270441); +#313806 = STYLED_ITEM('color',(#313807),#90193); +#313807 = PRESENTATION_STYLE_ASSIGNMENT((#313808)); +#313808 = SURFACE_STYLE_USAGE(.BOTH.,#313809); +#313809 = SURFACE_SIDE_STYLE('',(#313810)); +#313810 = SURFACE_STYLE_FILL_AREA(#313811); +#313811 = FILL_AREA_STYLE('',(#313812)); +#313812 = FILL_AREA_STYLE_COLOUR('',#270441); +#313813 = STYLED_ITEM('color',(#313814),#90210); +#313814 = PRESENTATION_STYLE_ASSIGNMENT((#313815)); +#313815 = SURFACE_STYLE_USAGE(.BOTH.,#313816); +#313816 = SURFACE_SIDE_STYLE('',(#313817)); +#313817 = SURFACE_STYLE_FILL_AREA(#313818); +#313818 = FILL_AREA_STYLE('',(#313819)); +#313819 = FILL_AREA_STYLE_COLOUR('',#270441); +#313820 = STYLED_ITEM('color',(#313821),#90258); +#313821 = PRESENTATION_STYLE_ASSIGNMENT((#313822)); +#313822 = SURFACE_STYLE_USAGE(.BOTH.,#313823); +#313823 = SURFACE_SIDE_STYLE('',(#313824)); +#313824 = SURFACE_STYLE_FILL_AREA(#313825); +#313825 = FILL_AREA_STYLE('',(#313826)); +#313826 = FILL_AREA_STYLE_COLOUR('',#270350); +#313827 = STYLED_ITEM('color',(#313828),#90299); +#313828 = PRESENTATION_STYLE_ASSIGNMENT((#313829)); +#313829 = SURFACE_STYLE_USAGE(.BOTH.,#313830); +#313830 = SURFACE_SIDE_STYLE('',(#313831)); +#313831 = SURFACE_STYLE_FILL_AREA(#313832); +#313832 = FILL_AREA_STYLE('',(#313833)); +#313833 = FILL_AREA_STYLE_COLOUR('',#270441); +#313834 = STYLED_ITEM('color',(#313835),#90317); +#313835 = PRESENTATION_STYLE_ASSIGNMENT((#313836)); +#313836 = SURFACE_STYLE_USAGE(.BOTH.,#313837); +#313837 = SURFACE_SIDE_STYLE('',(#313838)); +#313838 = SURFACE_STYLE_FILL_AREA(#313839); +#313839 = FILL_AREA_STYLE('',(#313840)); +#313840 = FILL_AREA_STYLE_COLOUR('',#270441); +#313841 = STYLED_ITEM('color',(#313842),#90329); +#313842 = PRESENTATION_STYLE_ASSIGNMENT((#313843)); +#313843 = SURFACE_STYLE_USAGE(.BOTH.,#313844); +#313844 = SURFACE_SIDE_STYLE('',(#313845)); +#313845 = SURFACE_STYLE_FILL_AREA(#313846); +#313846 = FILL_AREA_STYLE('',(#313847)); +#313847 = FILL_AREA_STYLE_COLOUR('',#270441); +#313848 = STYLED_ITEM('color',(#313849),#90341); +#313849 = PRESENTATION_STYLE_ASSIGNMENT((#313850)); +#313850 = SURFACE_STYLE_USAGE(.BOTH.,#313851); +#313851 = SURFACE_SIDE_STYLE('',(#313852)); +#313852 = SURFACE_STYLE_FILL_AREA(#313853); +#313853 = FILL_AREA_STYLE('',(#313854)); +#313854 = FILL_AREA_STYLE_COLOUR('',#270441); +#313855 = STYLED_ITEM('color',(#313856),#90357); +#313856 = PRESENTATION_STYLE_ASSIGNMENT((#313857)); +#313857 = SURFACE_STYLE_USAGE(.BOTH.,#313858); +#313858 = SURFACE_SIDE_STYLE('',(#313859)); +#313859 = SURFACE_STYLE_FILL_AREA(#313860); +#313860 = FILL_AREA_STYLE('',(#313861)); +#313861 = FILL_AREA_STYLE_COLOUR('',#270350); +#313862 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #313863,#313870,#313877),#98289); +#313863 = STYLED_ITEM('color',(#313864),#96627); +#313864 = PRESENTATION_STYLE_ASSIGNMENT((#313865)); +#313865 = SURFACE_STYLE_USAGE(.BOTH.,#313866); +#313866 = SURFACE_SIDE_STYLE('',(#313867)); +#313867 = SURFACE_STYLE_FILL_AREA(#313868); +#313868 = FILL_AREA_STYLE('',(#313869)); +#313869 = FILL_AREA_STYLE_COLOUR('',#270441); +#313870 = STYLED_ITEM('color',(#313871),#97317); +#313871 = PRESENTATION_STYLE_ASSIGNMENT((#313872)); +#313872 = SURFACE_STYLE_USAGE(.BOTH.,#313873); +#313873 = SURFACE_SIDE_STYLE('',(#313874)); +#313874 = SURFACE_STYLE_FILL_AREA(#313875); +#313875 = FILL_AREA_STYLE('',(#313876)); +#313876 = FILL_AREA_STYLE_COLOUR('',#270441); +#313877 = STYLED_ITEM('color',(#313878),#97599); +#313878 = PRESENTATION_STYLE_ASSIGNMENT((#313879)); +#313879 = SURFACE_STYLE_USAGE(.BOTH.,#313880); +#313880 = SURFACE_SIDE_STYLE('',(#313881)); +#313881 = SURFACE_STYLE_FILL_AREA(#313882); +#313882 = FILL_AREA_STYLE('',(#313883)); +#313883 = FILL_AREA_STYLE_COLOUR('',#270441); +#313884 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #313885,#313892,#313899,#313906,#313913,#313920,#313927,#313934, + #313941,#313948,#313955,#313962,#313969,#313976,#313983,#313990, + #313997,#314004,#314011,#314018,#314025,#314032,#314039,#314046, + #314053,#314060,#314067,#314074,#314081,#314088,#314095,#314102, + #314109,#314116,#314123,#314130,#314137,#314144,#314151,#314158, + #314165,#314172,#314179,#314186,#314193,#314200,#314207,#314214, + #314221,#314228,#314235,#314242,#314249,#314256,#314263,#314270, + #314277,#314284,#314291,#314298,#314305,#314312,#314319,#314326, + #314333,#314340,#314347,#314354,#314361,#314368,#314375,#314382, + #314389,#314396,#314403,#314410,#314417,#314424,#314431,#314438, + #314445,#314452,#314459,#314466,#314473,#314480,#314487,#314494, + #314501,#314508,#314515,#314522,#314529,#314536,#314543,#314550, + #314557,#314564,#314571,#314578,#314585,#314592,#314599,#314606, + #314613,#314620,#314627,#314634,#314641,#314648,#314655,#314662, + #314669,#314676,#314683,#314690,#314697),#4905); +#313885 = STYLED_ITEM('color',(#313886),#1386); +#313886 = PRESENTATION_STYLE_ASSIGNMENT((#313887)); +#313887 = SURFACE_STYLE_USAGE(.BOTH.,#313888); +#313888 = SURFACE_SIDE_STYLE('',(#313889)); +#313889 = SURFACE_STYLE_FILL_AREA(#313890); +#313890 = FILL_AREA_STYLE('',(#313891)); +#313891 = FILL_AREA_STYLE_COLOUR('',#295381); +#313892 = STYLED_ITEM('color',(#313893),#1458); +#313893 = PRESENTATION_STYLE_ASSIGNMENT((#313894)); +#313894 = SURFACE_STYLE_USAGE(.BOTH.,#313895); +#313895 = SURFACE_SIDE_STYLE('',(#313896)); +#313896 = SURFACE_STYLE_FILL_AREA(#313897); +#313897 = FILL_AREA_STYLE('',(#313898)); +#313898 = FILL_AREA_STYLE_COLOUR('',#295381); +#313899 = STYLED_ITEM('color',(#313900),#1497); +#313900 = PRESENTATION_STYLE_ASSIGNMENT((#313901)); +#313901 = SURFACE_STYLE_USAGE(.BOTH.,#313902); +#313902 = SURFACE_SIDE_STYLE('',(#313903)); +#313903 = SURFACE_STYLE_FILL_AREA(#313904); +#313904 = FILL_AREA_STYLE('',(#313905)); +#313905 = FILL_AREA_STYLE_COLOUR('',#295381); +#313906 = STYLED_ITEM('color',(#313907),#1521); +#313907 = PRESENTATION_STYLE_ASSIGNMENT((#313908)); +#313908 = SURFACE_STYLE_USAGE(.BOTH.,#313909); +#313909 = SURFACE_SIDE_STYLE('',(#313910)); +#313910 = SURFACE_STYLE_FILL_AREA(#313911); +#313911 = FILL_AREA_STYLE('',(#313912)); +#313912 = FILL_AREA_STYLE_COLOUR('',#295381); +#313913 = STYLED_ITEM('color',(#313914),#1586); +#313914 = PRESENTATION_STYLE_ASSIGNMENT((#313915)); +#313915 = SURFACE_STYLE_USAGE(.BOTH.,#313916); +#313916 = SURFACE_SIDE_STYLE('',(#313917)); +#313917 = SURFACE_STYLE_FILL_AREA(#313918); +#313918 = FILL_AREA_STYLE('',(#313919)); +#313919 = FILL_AREA_STYLE_COLOUR('',#295381); +#313920 = STYLED_ITEM('color',(#313921),#1610); +#313921 = PRESENTATION_STYLE_ASSIGNMENT((#313922)); +#313922 = SURFACE_STYLE_USAGE(.BOTH.,#313923); +#313923 = SURFACE_SIDE_STYLE('',(#313924)); +#313924 = SURFACE_STYLE_FILL_AREA(#313925); +#313925 = FILL_AREA_STYLE('',(#313926)); +#313926 = FILL_AREA_STYLE_COLOUR('',#295381); +#313927 = STYLED_ITEM('color',(#313928),#1730); +#313928 = PRESENTATION_STYLE_ASSIGNMENT((#313929)); +#313929 = SURFACE_STYLE_USAGE(.BOTH.,#313930); +#313930 = SURFACE_SIDE_STYLE('',(#313931)); +#313931 = SURFACE_STYLE_FILL_AREA(#313932); +#313932 = FILL_AREA_STYLE('',(#313933)); +#313933 = FILL_AREA_STYLE_COLOUR('',#295381); +#313934 = STYLED_ITEM('color',(#313935),#1754); +#313935 = PRESENTATION_STYLE_ASSIGNMENT((#313936)); +#313936 = SURFACE_STYLE_USAGE(.BOTH.,#313937); +#313937 = SURFACE_SIDE_STYLE('',(#313938)); +#313938 = SURFACE_STYLE_FILL_AREA(#313939); +#313939 = FILL_AREA_STYLE('',(#313940)); +#313940 = FILL_AREA_STYLE_COLOUR('',#295381); +#313941 = STYLED_ITEM('color',(#313942),#1819); +#313942 = PRESENTATION_STYLE_ASSIGNMENT((#313943)); +#313943 = SURFACE_STYLE_USAGE(.BOTH.,#313944); +#313944 = SURFACE_SIDE_STYLE('',(#313945)); +#313945 = SURFACE_STYLE_FILL_AREA(#313946); +#313946 = FILL_AREA_STYLE('',(#313947)); +#313947 = FILL_AREA_STYLE_COLOUR('',#295381); +#313948 = STYLED_ITEM('color',(#313949),#1844); +#313949 = PRESENTATION_STYLE_ASSIGNMENT((#313950)); +#313950 = SURFACE_STYLE_USAGE(.BOTH.,#313951); +#313951 = SURFACE_SIDE_STYLE('',(#313952)); +#313952 = SURFACE_STYLE_FILL_AREA(#313953); +#313953 = FILL_AREA_STYLE('',(#313954)); +#313954 = FILL_AREA_STYLE_COLOUR('',#295381); +#313955 = STYLED_ITEM('color',(#313956),#1893); +#313956 = PRESENTATION_STYLE_ASSIGNMENT((#313957)); +#313957 = SURFACE_STYLE_USAGE(.BOTH.,#313958); +#313958 = SURFACE_SIDE_STYLE('',(#313959)); +#313959 = SURFACE_STYLE_FILL_AREA(#313960); +#313960 = FILL_AREA_STYLE('',(#313961)); +#313961 = FILL_AREA_STYLE_COLOUR('',#295381); +#313962 = STYLED_ITEM('color',(#313963),#1910); +#313963 = PRESENTATION_STYLE_ASSIGNMENT((#313964)); +#313964 = SURFACE_STYLE_USAGE(.BOTH.,#313965); +#313965 = SURFACE_SIDE_STYLE('',(#313966)); +#313966 = SURFACE_STYLE_FILL_AREA(#313967); +#313967 = FILL_AREA_STYLE('',(#313968)); +#313968 = FILL_AREA_STYLE_COLOUR('',#295381); +#313969 = STYLED_ITEM('color',(#313970),#1934); +#313970 = PRESENTATION_STYLE_ASSIGNMENT((#313971)); +#313971 = SURFACE_STYLE_USAGE(.BOTH.,#313972); +#313972 = SURFACE_SIDE_STYLE('',(#313973)); +#313973 = SURFACE_STYLE_FILL_AREA(#313974); +#313974 = FILL_AREA_STYLE('',(#313975)); +#313975 = FILL_AREA_STYLE_COLOUR('',#295381); +#313976 = STYLED_ITEM('color',(#313977),#1951); +#313977 = PRESENTATION_STYLE_ASSIGNMENT((#313978)); +#313978 = SURFACE_STYLE_USAGE(.BOTH.,#313979); +#313979 = SURFACE_SIDE_STYLE('',(#313980)); +#313980 = SURFACE_STYLE_FILL_AREA(#313981); +#313981 = FILL_AREA_STYLE('',(#313982)); +#313982 = FILL_AREA_STYLE_COLOUR('',#295381); +#313983 = STYLED_ITEM('color',(#313984),#2121); +#313984 = PRESENTATION_STYLE_ASSIGNMENT((#313985)); +#313985 = SURFACE_STYLE_USAGE(.BOTH.,#313986); +#313986 = SURFACE_SIDE_STYLE('',(#313987)); +#313987 = SURFACE_STYLE_FILL_AREA(#313988); +#313988 = FILL_AREA_STYLE('',(#313989)); +#313989 = FILL_AREA_STYLE_COLOUR('',#295381); +#313990 = STYLED_ITEM('color',(#313991),#2145); +#313991 = PRESENTATION_STYLE_ASSIGNMENT((#313992)); +#313992 = SURFACE_STYLE_USAGE(.BOTH.,#313993); +#313993 = SURFACE_SIDE_STYLE('',(#313994)); +#313994 = SURFACE_STYLE_FILL_AREA(#313995); +#313995 = FILL_AREA_STYLE('',(#313996)); +#313996 = FILL_AREA_STYLE_COLOUR('',#295381); +#313997 = STYLED_ITEM('color',(#313998),#2379); +#313998 = PRESENTATION_STYLE_ASSIGNMENT((#313999)); +#313999 = SURFACE_STYLE_USAGE(.BOTH.,#314000); +#314000 = SURFACE_SIDE_STYLE('',(#314001)); +#314001 = SURFACE_STYLE_FILL_AREA(#314002); +#314002 = FILL_AREA_STYLE('',(#314003)); +#314003 = FILL_AREA_STYLE_COLOUR('',#295381); +#314004 = STYLED_ITEM('color',(#314005),#2403); +#314005 = PRESENTATION_STYLE_ASSIGNMENT((#314006)); +#314006 = SURFACE_STYLE_USAGE(.BOTH.,#314007); +#314007 = SURFACE_SIDE_STYLE('',(#314008)); +#314008 = SURFACE_STYLE_FILL_AREA(#314009); +#314009 = FILL_AREA_STYLE('',(#314010)); +#314010 = FILL_AREA_STYLE_COLOUR('',#295381); +#314011 = STYLED_ITEM('color',(#314012),#2436); +#314012 = PRESENTATION_STYLE_ASSIGNMENT((#314013)); +#314013 = SURFACE_STYLE_USAGE(.BOTH.,#314014); +#314014 = SURFACE_SIDE_STYLE('',(#314015)); +#314015 = SURFACE_STYLE_FILL_AREA(#314016); +#314016 = FILL_AREA_STYLE('',(#314017)); +#314017 = FILL_AREA_STYLE_COLOUR('',#295381); +#314018 = STYLED_ITEM('color',(#314019),#2460); +#314019 = PRESENTATION_STYLE_ASSIGNMENT((#314020)); +#314020 = SURFACE_STYLE_USAGE(.BOTH.,#314021); +#314021 = SURFACE_SIDE_STYLE('',(#314022)); +#314022 = SURFACE_STYLE_FILL_AREA(#314023); +#314023 = FILL_AREA_STYLE('',(#314024)); +#314024 = FILL_AREA_STYLE_COLOUR('',#295381); +#314025 = STYLED_ITEM('color',(#314026),#2491); +#314026 = PRESENTATION_STYLE_ASSIGNMENT((#314027)); +#314027 = SURFACE_STYLE_USAGE(.BOTH.,#314028); +#314028 = SURFACE_SIDE_STYLE('',(#314029)); +#314029 = SURFACE_STYLE_FILL_AREA(#314030); +#314030 = FILL_AREA_STYLE('',(#314031)); +#314031 = FILL_AREA_STYLE_COLOUR('',#295381); +#314032 = STYLED_ITEM('color',(#314033),#2508); +#314033 = PRESENTATION_STYLE_ASSIGNMENT((#314034)); +#314034 = SURFACE_STYLE_USAGE(.BOTH.,#314035); +#314035 = SURFACE_SIDE_STYLE('',(#314036)); +#314036 = SURFACE_STYLE_FILL_AREA(#314037); +#314037 = FILL_AREA_STYLE('',(#314038)); +#314038 = FILL_AREA_STYLE_COLOUR('',#295381); +#314039 = STYLED_ITEM('color',(#314040),#2541); +#314040 = PRESENTATION_STYLE_ASSIGNMENT((#314041)); +#314041 = SURFACE_STYLE_USAGE(.BOTH.,#314042); +#314042 = SURFACE_SIDE_STYLE('',(#314043)); +#314043 = SURFACE_STYLE_FILL_AREA(#314044); +#314044 = FILL_AREA_STYLE('',(#314045)); +#314045 = FILL_AREA_STYLE_COLOUR('',#295381); +#314046 = STYLED_ITEM('color',(#314047),#2565); +#314047 = PRESENTATION_STYLE_ASSIGNMENT((#314048)); +#314048 = SURFACE_STYLE_USAGE(.BOTH.,#314049); +#314049 = SURFACE_SIDE_STYLE('',(#314050)); +#314050 = SURFACE_STYLE_FILL_AREA(#314051); +#314051 = FILL_AREA_STYLE('',(#314052)); +#314052 = FILL_AREA_STYLE_COLOUR('',#295381); +#314053 = STYLED_ITEM('color',(#314054),#2596); +#314054 = PRESENTATION_STYLE_ASSIGNMENT((#314055)); +#314055 = SURFACE_STYLE_USAGE(.BOTH.,#314056); +#314056 = SURFACE_SIDE_STYLE('',(#314057)); +#314057 = SURFACE_STYLE_FILL_AREA(#314058); +#314058 = FILL_AREA_STYLE('',(#314059)); +#314059 = FILL_AREA_STYLE_COLOUR('',#295381); +#314060 = STYLED_ITEM('color',(#314061),#2613); +#314061 = PRESENTATION_STYLE_ASSIGNMENT((#314062)); +#314062 = SURFACE_STYLE_USAGE(.BOTH.,#314063); +#314063 = SURFACE_SIDE_STYLE('',(#314064)); +#314064 = SURFACE_STYLE_FILL_AREA(#314065); +#314065 = FILL_AREA_STYLE('',(#314066)); +#314066 = FILL_AREA_STYLE_COLOUR('',#295381); +#314067 = STYLED_ITEM('color',(#314068),#2646); +#314068 = PRESENTATION_STYLE_ASSIGNMENT((#314069)); +#314069 = SURFACE_STYLE_USAGE(.BOTH.,#314070); +#314070 = SURFACE_SIDE_STYLE('',(#314071)); +#314071 = SURFACE_STYLE_FILL_AREA(#314072); +#314072 = FILL_AREA_STYLE('',(#314073)); +#314073 = FILL_AREA_STYLE_COLOUR('',#295381); +#314074 = STYLED_ITEM('color',(#314075),#2670); +#314075 = PRESENTATION_STYLE_ASSIGNMENT((#314076)); +#314076 = SURFACE_STYLE_USAGE(.BOTH.,#314077); +#314077 = SURFACE_SIDE_STYLE('',(#314078)); +#314078 = SURFACE_STYLE_FILL_AREA(#314079); +#314079 = FILL_AREA_STYLE('',(#314080)); +#314080 = FILL_AREA_STYLE_COLOUR('',#295381); +#314081 = STYLED_ITEM('color',(#314082),#2701); +#314082 = PRESENTATION_STYLE_ASSIGNMENT((#314083)); +#314083 = SURFACE_STYLE_USAGE(.BOTH.,#314084); +#314084 = SURFACE_SIDE_STYLE('',(#314085)); +#314085 = SURFACE_STYLE_FILL_AREA(#314086); +#314086 = FILL_AREA_STYLE('',(#314087)); +#314087 = FILL_AREA_STYLE_COLOUR('',#295381); +#314088 = STYLED_ITEM('color',(#314089),#2713); +#314089 = PRESENTATION_STYLE_ASSIGNMENT((#314090)); +#314090 = SURFACE_STYLE_USAGE(.BOTH.,#314091); +#314091 = SURFACE_SIDE_STYLE('',(#314092)); +#314092 = SURFACE_STYLE_FILL_AREA(#314093); +#314093 = FILL_AREA_STYLE('',(#314094)); +#314094 = FILL_AREA_STYLE_COLOUR('',#295381); +#314095 = STYLED_ITEM('color',(#314096),#2746); +#314096 = PRESENTATION_STYLE_ASSIGNMENT((#314097)); +#314097 = SURFACE_STYLE_USAGE(.BOTH.,#314098); +#314098 = SURFACE_SIDE_STYLE('',(#314099)); +#314099 = SURFACE_STYLE_FILL_AREA(#314100); +#314100 = FILL_AREA_STYLE('',(#314101)); +#314101 = FILL_AREA_STYLE_COLOUR('',#295381); +#314102 = STYLED_ITEM('color',(#314103),#2763); +#314103 = PRESENTATION_STYLE_ASSIGNMENT((#314104)); +#314104 = SURFACE_STYLE_USAGE(.BOTH.,#314105); +#314105 = SURFACE_SIDE_STYLE('',(#314106)); +#314106 = SURFACE_STYLE_FILL_AREA(#314107); +#314107 = FILL_AREA_STYLE('',(#314108)); +#314108 = FILL_AREA_STYLE_COLOUR('',#295381); +#314109 = STYLED_ITEM('color',(#314110),#2780); +#314110 = PRESENTATION_STYLE_ASSIGNMENT((#314111)); +#314111 = SURFACE_STYLE_USAGE(.BOTH.,#314112); +#314112 = SURFACE_SIDE_STYLE('',(#314113)); +#314113 = SURFACE_STYLE_FILL_AREA(#314114); +#314114 = FILL_AREA_STYLE('',(#314115)); +#314115 = FILL_AREA_STYLE_COLOUR('',#295381); +#314116 = STYLED_ITEM('color',(#314117),#2792); +#314117 = PRESENTATION_STYLE_ASSIGNMENT((#314118)); +#314118 = SURFACE_STYLE_USAGE(.BOTH.,#314119); +#314119 = SURFACE_SIDE_STYLE('',(#314120)); +#314120 = SURFACE_STYLE_FILL_AREA(#314121); +#314121 = FILL_AREA_STYLE('',(#314122)); +#314122 = FILL_AREA_STYLE_COLOUR('',#295381); +#314123 = STYLED_ITEM('color',(#314124),#2906); +#314124 = PRESENTATION_STYLE_ASSIGNMENT((#314125)); +#314125 = SURFACE_STYLE_USAGE(.BOTH.,#314126); +#314126 = SURFACE_SIDE_STYLE('',(#314127)); +#314127 = SURFACE_STYLE_FILL_AREA(#314128); +#314128 = FILL_AREA_STYLE('',(#314129)); +#314129 = FILL_AREA_STYLE_COLOUR('',#295381); +#314130 = STYLED_ITEM('color',(#314131),#2923); +#314131 = PRESENTATION_STYLE_ASSIGNMENT((#314132)); +#314132 = SURFACE_STYLE_USAGE(.BOTH.,#314133); +#314133 = SURFACE_SIDE_STYLE('',(#314134)); +#314134 = SURFACE_STYLE_FILL_AREA(#314135); +#314135 = FILL_AREA_STYLE('',(#314136)); +#314136 = FILL_AREA_STYLE_COLOUR('',#295381); +#314137 = STYLED_ITEM('color',(#314138),#2940); +#314138 = PRESENTATION_STYLE_ASSIGNMENT((#314139)); +#314139 = SURFACE_STYLE_USAGE(.BOTH.,#314140); +#314140 = SURFACE_SIDE_STYLE('',(#314141)); +#314141 = SURFACE_STYLE_FILL_AREA(#314142); +#314142 = FILL_AREA_STYLE('',(#314143)); +#314143 = FILL_AREA_STYLE_COLOUR('',#295381); +#314144 = STYLED_ITEM('color',(#314145),#2957); +#314145 = PRESENTATION_STYLE_ASSIGNMENT((#314146)); +#314146 = SURFACE_STYLE_USAGE(.BOTH.,#314147); +#314147 = SURFACE_SIDE_STYLE('',(#314148)); +#314148 = SURFACE_STYLE_FILL_AREA(#314149); +#314149 = FILL_AREA_STYLE('',(#314150)); +#314150 = FILL_AREA_STYLE_COLOUR('',#295381); +#314151 = STYLED_ITEM('color',(#314152),#2974); +#314152 = PRESENTATION_STYLE_ASSIGNMENT((#314153)); +#314153 = SURFACE_STYLE_USAGE(.BOTH.,#314154); +#314154 = SURFACE_SIDE_STYLE('',(#314155)); +#314155 = SURFACE_STYLE_FILL_AREA(#314156); +#314156 = FILL_AREA_STYLE('',(#314157)); +#314157 = FILL_AREA_STYLE_COLOUR('',#295381); +#314158 = STYLED_ITEM('color',(#314159),#2991); +#314159 = PRESENTATION_STYLE_ASSIGNMENT((#314160)); +#314160 = SURFACE_STYLE_USAGE(.BOTH.,#314161); +#314161 = SURFACE_SIDE_STYLE('',(#314162)); +#314162 = SURFACE_STYLE_FILL_AREA(#314163); +#314163 = FILL_AREA_STYLE('',(#314164)); +#314164 = FILL_AREA_STYLE_COLOUR('',#295381); +#314165 = STYLED_ITEM('color',(#314166),#3008); +#314166 = PRESENTATION_STYLE_ASSIGNMENT((#314167)); +#314167 = SURFACE_STYLE_USAGE(.BOTH.,#314168); +#314168 = SURFACE_SIDE_STYLE('',(#314169)); +#314169 = SURFACE_STYLE_FILL_AREA(#314170); +#314170 = FILL_AREA_STYLE('',(#314171)); +#314171 = FILL_AREA_STYLE_COLOUR('',#295381); +#314172 = STYLED_ITEM('color',(#314173),#3025); +#314173 = PRESENTATION_STYLE_ASSIGNMENT((#314174)); +#314174 = SURFACE_STYLE_USAGE(.BOTH.,#314175); +#314175 = SURFACE_SIDE_STYLE('',(#314176)); +#314176 = SURFACE_STYLE_FILL_AREA(#314177); +#314177 = FILL_AREA_STYLE('',(#314178)); +#314178 = FILL_AREA_STYLE_COLOUR('',#295381); +#314179 = STYLED_ITEM('color',(#314180),#3042); +#314180 = PRESENTATION_STYLE_ASSIGNMENT((#314181)); +#314181 = SURFACE_STYLE_USAGE(.BOTH.,#314182); +#314182 = SURFACE_SIDE_STYLE('',(#314183)); +#314183 = SURFACE_STYLE_FILL_AREA(#314184); +#314184 = FILL_AREA_STYLE('',(#314185)); +#314185 = FILL_AREA_STYLE_COLOUR('',#295381); +#314186 = STYLED_ITEM('color',(#314187),#3059); +#314187 = PRESENTATION_STYLE_ASSIGNMENT((#314188)); +#314188 = SURFACE_STYLE_USAGE(.BOTH.,#314189); +#314189 = SURFACE_SIDE_STYLE('',(#314190)); +#314190 = SURFACE_STYLE_FILL_AREA(#314191); +#314191 = FILL_AREA_STYLE('',(#314192)); +#314192 = FILL_AREA_STYLE_COLOUR('',#295381); +#314193 = STYLED_ITEM('color',(#314194),#3076); +#314194 = PRESENTATION_STYLE_ASSIGNMENT((#314195)); +#314195 = SURFACE_STYLE_USAGE(.BOTH.,#314196); +#314196 = SURFACE_SIDE_STYLE('',(#314197)); +#314197 = SURFACE_STYLE_FILL_AREA(#314198); +#314198 = FILL_AREA_STYLE('',(#314199)); +#314199 = FILL_AREA_STYLE_COLOUR('',#295381); +#314200 = STYLED_ITEM('color',(#314201),#3093); +#314201 = PRESENTATION_STYLE_ASSIGNMENT((#314202)); +#314202 = SURFACE_STYLE_USAGE(.BOTH.,#314203); +#314203 = SURFACE_SIDE_STYLE('',(#314204)); +#314204 = SURFACE_STYLE_FILL_AREA(#314205); +#314205 = FILL_AREA_STYLE('',(#314206)); +#314206 = FILL_AREA_STYLE_COLOUR('',#295381); +#314207 = STYLED_ITEM('color',(#314208),#3110); +#314208 = PRESENTATION_STYLE_ASSIGNMENT((#314209)); +#314209 = SURFACE_STYLE_USAGE(.BOTH.,#314210); +#314210 = SURFACE_SIDE_STYLE('',(#314211)); +#314211 = SURFACE_STYLE_FILL_AREA(#314212); +#314212 = FILL_AREA_STYLE('',(#314213)); +#314213 = FILL_AREA_STYLE_COLOUR('',#295381); +#314214 = STYLED_ITEM('color',(#314215),#3127); +#314215 = PRESENTATION_STYLE_ASSIGNMENT((#314216)); +#314216 = SURFACE_STYLE_USAGE(.BOTH.,#314217); +#314217 = SURFACE_SIDE_STYLE('',(#314218)); +#314218 = SURFACE_STYLE_FILL_AREA(#314219); +#314219 = FILL_AREA_STYLE('',(#314220)); +#314220 = FILL_AREA_STYLE_COLOUR('',#295381); +#314221 = STYLED_ITEM('color',(#314222),#3144); +#314222 = PRESENTATION_STYLE_ASSIGNMENT((#314223)); +#314223 = SURFACE_STYLE_USAGE(.BOTH.,#314224); +#314224 = SURFACE_SIDE_STYLE('',(#314225)); +#314225 = SURFACE_STYLE_FILL_AREA(#314226); +#314226 = FILL_AREA_STYLE('',(#314227)); +#314227 = FILL_AREA_STYLE_COLOUR('',#295381); +#314228 = STYLED_ITEM('color',(#314229),#3156); +#314229 = PRESENTATION_STYLE_ASSIGNMENT((#314230)); +#314230 = SURFACE_STYLE_USAGE(.BOTH.,#314231); +#314231 = SURFACE_SIDE_STYLE('',(#314232)); +#314232 = SURFACE_STYLE_FILL_AREA(#314233); +#314233 = FILL_AREA_STYLE('',(#314234)); +#314234 = FILL_AREA_STYLE_COLOUR('',#295381); +#314235 = STYLED_ITEM('color',(#314236),#3173); +#314236 = PRESENTATION_STYLE_ASSIGNMENT((#314237)); +#314237 = SURFACE_STYLE_USAGE(.BOTH.,#314238); +#314238 = SURFACE_SIDE_STYLE('',(#314239)); +#314239 = SURFACE_STYLE_FILL_AREA(#314240); +#314240 = FILL_AREA_STYLE('',(#314241)); +#314241 = FILL_AREA_STYLE_COLOUR('',#295381); +#314242 = STYLED_ITEM('color',(#314243),#3190); +#314243 = PRESENTATION_STYLE_ASSIGNMENT((#314244)); +#314244 = SURFACE_STYLE_USAGE(.BOTH.,#314245); +#314245 = SURFACE_SIDE_STYLE('',(#314246)); +#314246 = SURFACE_STYLE_FILL_AREA(#314247); +#314247 = FILL_AREA_STYLE('',(#314248)); +#314248 = FILL_AREA_STYLE_COLOUR('',#295381); +#314249 = STYLED_ITEM('color',(#314250),#3207); +#314250 = PRESENTATION_STYLE_ASSIGNMENT((#314251)); +#314251 = SURFACE_STYLE_USAGE(.BOTH.,#314252); +#314252 = SURFACE_SIDE_STYLE('',(#314253)); +#314253 = SURFACE_STYLE_FILL_AREA(#314254); +#314254 = FILL_AREA_STYLE('',(#314255)); +#314255 = FILL_AREA_STYLE_COLOUR('',#295381); +#314256 = STYLED_ITEM('color',(#314257),#3253); +#314257 = PRESENTATION_STYLE_ASSIGNMENT((#314258)); +#314258 = SURFACE_STYLE_USAGE(.BOTH.,#314259); +#314259 = SURFACE_SIDE_STYLE('',(#314260)); +#314260 = SURFACE_STYLE_FILL_AREA(#314261); +#314261 = FILL_AREA_STYLE('',(#314262)); +#314262 = FILL_AREA_STYLE_COLOUR('',#295381); +#314263 = STYLED_ITEM('color',(#314264),#3299); +#314264 = PRESENTATION_STYLE_ASSIGNMENT((#314265)); +#314265 = SURFACE_STYLE_USAGE(.BOTH.,#314266); +#314266 = SURFACE_SIDE_STYLE('',(#314267)); +#314267 = SURFACE_STYLE_FILL_AREA(#314268); +#314268 = FILL_AREA_STYLE('',(#314269)); +#314269 = FILL_AREA_STYLE_COLOUR('',#295381); +#314270 = STYLED_ITEM('color',(#314271),#3345); +#314271 = PRESENTATION_STYLE_ASSIGNMENT((#314272)); +#314272 = SURFACE_STYLE_USAGE(.BOTH.,#314273); +#314273 = SURFACE_SIDE_STYLE('',(#314274)); +#314274 = SURFACE_STYLE_FILL_AREA(#314275); +#314275 = FILL_AREA_STYLE('',(#314276)); +#314276 = FILL_AREA_STYLE_COLOUR('',#295697); +#314277 = STYLED_ITEM('color',(#314278),#3376); +#314278 = PRESENTATION_STYLE_ASSIGNMENT((#314279)); +#314279 = SURFACE_STYLE_USAGE(.BOTH.,#314280); +#314280 = SURFACE_SIDE_STYLE('',(#314281)); +#314281 = SURFACE_STYLE_FILL_AREA(#314282); +#314282 = FILL_AREA_STYLE('',(#314283)); +#314283 = FILL_AREA_STYLE_COLOUR('',#295697); +#314284 = STYLED_ITEM('color',(#314285),#3400); +#314285 = PRESENTATION_STYLE_ASSIGNMENT((#314286)); +#314286 = SURFACE_STYLE_USAGE(.BOTH.,#314287); +#314287 = SURFACE_SIDE_STYLE('',(#314288)); +#314288 = SURFACE_STYLE_FILL_AREA(#314289); +#314289 = FILL_AREA_STYLE('',(#314290)); +#314290 = FILL_AREA_STYLE_COLOUR('',#295697); +#314291 = STYLED_ITEM('color',(#314292),#3424); +#314292 = PRESENTATION_STYLE_ASSIGNMENT((#314293)); +#314293 = SURFACE_STYLE_USAGE(.BOTH.,#314294); +#314294 = SURFACE_SIDE_STYLE('',(#314295)); +#314295 = SURFACE_STYLE_FILL_AREA(#314296); +#314296 = FILL_AREA_STYLE('',(#314297)); +#314297 = FILL_AREA_STYLE_COLOUR('',#295697); +#314298 = STYLED_ITEM('color',(#314299),#3441); +#314299 = PRESENTATION_STYLE_ASSIGNMENT((#314300)); +#314300 = SURFACE_STYLE_USAGE(.BOTH.,#314301); +#314301 = SURFACE_SIDE_STYLE('',(#314302)); +#314302 = SURFACE_STYLE_FILL_AREA(#314303); +#314303 = FILL_AREA_STYLE('',(#314304)); +#314304 = FILL_AREA_STYLE_COLOUR('',#295697); +#314305 = STYLED_ITEM('color',(#314306),#3472); +#314306 = PRESENTATION_STYLE_ASSIGNMENT((#314307)); +#314307 = SURFACE_STYLE_USAGE(.BOTH.,#314308); +#314308 = SURFACE_SIDE_STYLE('',(#314309)); +#314309 = SURFACE_STYLE_FILL_AREA(#314310); +#314310 = FILL_AREA_STYLE('',(#314311)); +#314311 = FILL_AREA_STYLE_COLOUR('',#295697); +#314312 = STYLED_ITEM('color',(#314313),#3496); +#314313 = PRESENTATION_STYLE_ASSIGNMENT((#314314)); +#314314 = SURFACE_STYLE_USAGE(.BOTH.,#314315); +#314315 = SURFACE_SIDE_STYLE('',(#314316)); +#314316 = SURFACE_STYLE_FILL_AREA(#314317); +#314317 = FILL_AREA_STYLE('',(#314318)); +#314318 = FILL_AREA_STYLE_COLOUR('',#295697); +#314319 = STYLED_ITEM('color',(#314320),#3520); +#314320 = PRESENTATION_STYLE_ASSIGNMENT((#314321)); +#314321 = SURFACE_STYLE_USAGE(.BOTH.,#314322); +#314322 = SURFACE_SIDE_STYLE('',(#314323)); +#314323 = SURFACE_STYLE_FILL_AREA(#314324); +#314324 = FILL_AREA_STYLE('',(#314325)); +#314325 = FILL_AREA_STYLE_COLOUR('',#295697); +#314326 = STYLED_ITEM('color',(#314327),#3537); +#314327 = PRESENTATION_STYLE_ASSIGNMENT((#314328)); +#314328 = SURFACE_STYLE_USAGE(.BOTH.,#314329); +#314329 = SURFACE_SIDE_STYLE('',(#314330)); +#314330 = SURFACE_STYLE_FILL_AREA(#314331); +#314331 = FILL_AREA_STYLE('',(#314332)); +#314332 = FILL_AREA_STYLE_COLOUR('',#295697); +#314333 = STYLED_ITEM('color',(#314334),#3568); +#314334 = PRESENTATION_STYLE_ASSIGNMENT((#314335)); +#314335 = SURFACE_STYLE_USAGE(.BOTH.,#314336); +#314336 = SURFACE_SIDE_STYLE('',(#314337)); +#314337 = SURFACE_STYLE_FILL_AREA(#314338); +#314338 = FILL_AREA_STYLE('',(#314339)); +#314339 = FILL_AREA_STYLE_COLOUR('',#295697); +#314340 = STYLED_ITEM('color',(#314341),#3592); +#314341 = PRESENTATION_STYLE_ASSIGNMENT((#314342)); +#314342 = SURFACE_STYLE_USAGE(.BOTH.,#314343); +#314343 = SURFACE_SIDE_STYLE('',(#314344)); +#314344 = SURFACE_STYLE_FILL_AREA(#314345); +#314345 = FILL_AREA_STYLE('',(#314346)); +#314346 = FILL_AREA_STYLE_COLOUR('',#295697); +#314347 = STYLED_ITEM('color',(#314348),#3616); +#314348 = PRESENTATION_STYLE_ASSIGNMENT((#314349)); +#314349 = SURFACE_STYLE_USAGE(.BOTH.,#314350); +#314350 = SURFACE_SIDE_STYLE('',(#314351)); +#314351 = SURFACE_STYLE_FILL_AREA(#314352); +#314352 = FILL_AREA_STYLE('',(#314353)); +#314353 = FILL_AREA_STYLE_COLOUR('',#295697); +#314354 = STYLED_ITEM('color',(#314355),#3633); +#314355 = PRESENTATION_STYLE_ASSIGNMENT((#314356)); +#314356 = SURFACE_STYLE_USAGE(.BOTH.,#314357); +#314357 = SURFACE_SIDE_STYLE('',(#314358)); +#314358 = SURFACE_STYLE_FILL_AREA(#314359); +#314359 = FILL_AREA_STYLE('',(#314360)); +#314360 = FILL_AREA_STYLE_COLOUR('',#295697); +#314361 = STYLED_ITEM('color',(#314362),#3696); +#314362 = PRESENTATION_STYLE_ASSIGNMENT((#314363)); +#314363 = SURFACE_STYLE_USAGE(.BOTH.,#314364); +#314364 = SURFACE_SIDE_STYLE('',(#314365)); +#314365 = SURFACE_STYLE_FILL_AREA(#314366); +#314366 = FILL_AREA_STYLE('',(#314367)); +#314367 = FILL_AREA_STYLE_COLOUR('',#295697); +#314368 = STYLED_ITEM('color',(#314369),#3720); +#314369 = PRESENTATION_STYLE_ASSIGNMENT((#314370)); +#314370 = SURFACE_STYLE_USAGE(.BOTH.,#314371); +#314371 = SURFACE_SIDE_STYLE('',(#314372)); +#314372 = SURFACE_STYLE_FILL_AREA(#314373); +#314373 = FILL_AREA_STYLE('',(#314374)); +#314374 = FILL_AREA_STYLE_COLOUR('',#295697); +#314375 = STYLED_ITEM('color',(#314376),#3776); +#314376 = PRESENTATION_STYLE_ASSIGNMENT((#314377)); +#314377 = SURFACE_STYLE_USAGE(.BOTH.,#314378); +#314378 = SURFACE_SIDE_STYLE('',(#314379)); +#314379 = SURFACE_STYLE_FILL_AREA(#314380); +#314380 = FILL_AREA_STYLE('',(#314381)); +#314381 = FILL_AREA_STYLE_COLOUR('',#295697); +#314382 = STYLED_ITEM('color',(#314383),#3793); +#314383 = PRESENTATION_STYLE_ASSIGNMENT((#314384)); +#314384 = SURFACE_STYLE_USAGE(.BOTH.,#314385); +#314385 = SURFACE_SIDE_STYLE('',(#314386)); +#314386 = SURFACE_STYLE_FILL_AREA(#314387); +#314387 = FILL_AREA_STYLE('',(#314388)); +#314388 = FILL_AREA_STYLE_COLOUR('',#295697); +#314389 = STYLED_ITEM('color',(#314390),#3824); +#314390 = PRESENTATION_STYLE_ASSIGNMENT((#314391)); +#314391 = SURFACE_STYLE_USAGE(.BOTH.,#314392); +#314392 = SURFACE_SIDE_STYLE('',(#314393)); +#314393 = SURFACE_STYLE_FILL_AREA(#314394); +#314394 = FILL_AREA_STYLE('',(#314395)); +#314395 = FILL_AREA_STYLE_COLOUR('',#295697); +#314396 = STYLED_ITEM('color',(#314397),#3848); +#314397 = PRESENTATION_STYLE_ASSIGNMENT((#314398)); +#314398 = SURFACE_STYLE_USAGE(.BOTH.,#314399); +#314399 = SURFACE_SIDE_STYLE('',(#314400)); +#314400 = SURFACE_STYLE_FILL_AREA(#314401); +#314401 = FILL_AREA_STYLE('',(#314402)); +#314402 = FILL_AREA_STYLE_COLOUR('',#295697); +#314403 = STYLED_ITEM('color',(#314404),#3872); +#314404 = PRESENTATION_STYLE_ASSIGNMENT((#314405)); +#314405 = SURFACE_STYLE_USAGE(.BOTH.,#314406); +#314406 = SURFACE_SIDE_STYLE('',(#314407)); +#314407 = SURFACE_STYLE_FILL_AREA(#314408); +#314408 = FILL_AREA_STYLE('',(#314409)); +#314409 = FILL_AREA_STYLE_COLOUR('',#295697); +#314410 = STYLED_ITEM('color',(#314411),#3889); +#314411 = PRESENTATION_STYLE_ASSIGNMENT((#314412)); +#314412 = SURFACE_STYLE_USAGE(.BOTH.,#314413); +#314413 = SURFACE_SIDE_STYLE('',(#314414)); +#314414 = SURFACE_STYLE_FILL_AREA(#314415); +#314415 = FILL_AREA_STYLE('',(#314416)); +#314416 = FILL_AREA_STYLE_COLOUR('',#295697); +#314417 = STYLED_ITEM('color',(#314418),#3952); +#314418 = PRESENTATION_STYLE_ASSIGNMENT((#314419)); +#314419 = SURFACE_STYLE_USAGE(.BOTH.,#314420); +#314420 = SURFACE_SIDE_STYLE('',(#314421)); +#314421 = SURFACE_STYLE_FILL_AREA(#314422); +#314422 = FILL_AREA_STYLE('',(#314423)); +#314423 = FILL_AREA_STYLE_COLOUR('',#295697); +#314424 = STYLED_ITEM('color',(#314425),#3976); +#314425 = PRESENTATION_STYLE_ASSIGNMENT((#314426)); +#314426 = SURFACE_STYLE_USAGE(.BOTH.,#314427); +#314427 = SURFACE_SIDE_STYLE('',(#314428)); +#314428 = SURFACE_STYLE_FILL_AREA(#314429); +#314429 = FILL_AREA_STYLE('',(#314430)); +#314430 = FILL_AREA_STYLE_COLOUR('',#295697); +#314431 = STYLED_ITEM('color',(#314432),#4032); +#314432 = PRESENTATION_STYLE_ASSIGNMENT((#314433)); +#314433 = SURFACE_STYLE_USAGE(.BOTH.,#314434); +#314434 = SURFACE_SIDE_STYLE('',(#314435)); +#314435 = SURFACE_STYLE_FILL_AREA(#314436); +#314436 = FILL_AREA_STYLE('',(#314437)); +#314437 = FILL_AREA_STYLE_COLOUR('',#295697); +#314438 = STYLED_ITEM('color',(#314439),#4049); +#314439 = PRESENTATION_STYLE_ASSIGNMENT((#314440)); +#314440 = SURFACE_STYLE_USAGE(.BOTH.,#314441); +#314441 = SURFACE_SIDE_STYLE('',(#314442)); +#314442 = SURFACE_STYLE_FILL_AREA(#314443); +#314443 = FILL_AREA_STYLE('',(#314444)); +#314444 = FILL_AREA_STYLE_COLOUR('',#295697); +#314445 = STYLED_ITEM('color',(#314446),#4080); +#314446 = PRESENTATION_STYLE_ASSIGNMENT((#314447)); +#314447 = SURFACE_STYLE_USAGE(.BOTH.,#314448); +#314448 = SURFACE_SIDE_STYLE('',(#314449)); +#314449 = SURFACE_STYLE_FILL_AREA(#314450); +#314450 = FILL_AREA_STYLE('',(#314451)); +#314451 = FILL_AREA_STYLE_COLOUR('',#295697); +#314452 = STYLED_ITEM('color',(#314453),#4104); +#314453 = PRESENTATION_STYLE_ASSIGNMENT((#314454)); +#314454 = SURFACE_STYLE_USAGE(.BOTH.,#314455); +#314455 = SURFACE_SIDE_STYLE('',(#314456)); +#314456 = SURFACE_STYLE_FILL_AREA(#314457); +#314457 = FILL_AREA_STYLE('',(#314458)); +#314458 = FILL_AREA_STYLE_COLOUR('',#295697); +#314459 = STYLED_ITEM('color',(#314460),#4128); +#314460 = PRESENTATION_STYLE_ASSIGNMENT((#314461)); +#314461 = SURFACE_STYLE_USAGE(.BOTH.,#314462); +#314462 = SURFACE_SIDE_STYLE('',(#314463)); +#314463 = SURFACE_STYLE_FILL_AREA(#314464); +#314464 = FILL_AREA_STYLE('',(#314465)); +#314465 = FILL_AREA_STYLE_COLOUR('',#295697); +#314466 = STYLED_ITEM('color',(#314467),#4145); +#314467 = PRESENTATION_STYLE_ASSIGNMENT((#314468)); +#314468 = SURFACE_STYLE_USAGE(.BOTH.,#314469); +#314469 = SURFACE_SIDE_STYLE('',(#314470)); +#314470 = SURFACE_STYLE_FILL_AREA(#314471); +#314471 = FILL_AREA_STYLE('',(#314472)); +#314472 = FILL_AREA_STYLE_COLOUR('',#295697); +#314473 = STYLED_ITEM('color',(#314474),#4176); +#314474 = PRESENTATION_STYLE_ASSIGNMENT((#314475)); +#314475 = SURFACE_STYLE_USAGE(.BOTH.,#314476); +#314476 = SURFACE_SIDE_STYLE('',(#314477)); +#314477 = SURFACE_STYLE_FILL_AREA(#314478); +#314478 = FILL_AREA_STYLE('',(#314479)); +#314479 = FILL_AREA_STYLE_COLOUR('',#295697); +#314480 = STYLED_ITEM('color',(#314481),#4200); +#314481 = PRESENTATION_STYLE_ASSIGNMENT((#314482)); +#314482 = SURFACE_STYLE_USAGE(.BOTH.,#314483); +#314483 = SURFACE_SIDE_STYLE('',(#314484)); +#314484 = SURFACE_STYLE_FILL_AREA(#314485); +#314485 = FILL_AREA_STYLE('',(#314486)); +#314486 = FILL_AREA_STYLE_COLOUR('',#295697); +#314487 = STYLED_ITEM('color',(#314488),#4224); +#314488 = PRESENTATION_STYLE_ASSIGNMENT((#314489)); +#314489 = SURFACE_STYLE_USAGE(.BOTH.,#314490); +#314490 = SURFACE_SIDE_STYLE('',(#314491)); +#314491 = SURFACE_STYLE_FILL_AREA(#314492); +#314492 = FILL_AREA_STYLE('',(#314493)); +#314493 = FILL_AREA_STYLE_COLOUR('',#295697); +#314494 = STYLED_ITEM('color',(#314495),#4241); +#314495 = PRESENTATION_STYLE_ASSIGNMENT((#314496)); +#314496 = SURFACE_STYLE_USAGE(.BOTH.,#314497); +#314497 = SURFACE_SIDE_STYLE('',(#314498)); +#314498 = SURFACE_STYLE_FILL_AREA(#314499); +#314499 = FILL_AREA_STYLE('',(#314500)); +#314500 = FILL_AREA_STYLE_COLOUR('',#295697); +#314501 = STYLED_ITEM('color',(#314502),#4272); +#314502 = PRESENTATION_STYLE_ASSIGNMENT((#314503)); +#314503 = SURFACE_STYLE_USAGE(.BOTH.,#314504); +#314504 = SURFACE_SIDE_STYLE('',(#314505)); +#314505 = SURFACE_STYLE_FILL_AREA(#314506); +#314506 = FILL_AREA_STYLE('',(#314507)); +#314507 = FILL_AREA_STYLE_COLOUR('',#295697); +#314508 = STYLED_ITEM('color',(#314509),#4296); +#314509 = PRESENTATION_STYLE_ASSIGNMENT((#314510)); +#314510 = SURFACE_STYLE_USAGE(.BOTH.,#314511); +#314511 = SURFACE_SIDE_STYLE('',(#314512)); +#314512 = SURFACE_STYLE_FILL_AREA(#314513); +#314513 = FILL_AREA_STYLE('',(#314514)); +#314514 = FILL_AREA_STYLE_COLOUR('',#295697); +#314515 = STYLED_ITEM('color',(#314516),#4320); +#314516 = PRESENTATION_STYLE_ASSIGNMENT((#314517)); +#314517 = SURFACE_STYLE_USAGE(.BOTH.,#314518); +#314518 = SURFACE_SIDE_STYLE('',(#314519)); +#314519 = SURFACE_STYLE_FILL_AREA(#314520); +#314520 = FILL_AREA_STYLE('',(#314521)); +#314521 = FILL_AREA_STYLE_COLOUR('',#295697); +#314522 = STYLED_ITEM('color',(#314523),#4337); +#314523 = PRESENTATION_STYLE_ASSIGNMENT((#314524)); +#314524 = SURFACE_STYLE_USAGE(.BOTH.,#314525); +#314525 = SURFACE_SIDE_STYLE('',(#314526)); +#314526 = SURFACE_STYLE_FILL_AREA(#314527); +#314527 = FILL_AREA_STYLE('',(#314528)); +#314528 = FILL_AREA_STYLE_COLOUR('',#295697); +#314529 = STYLED_ITEM('color',(#314530),#4384); +#314530 = PRESENTATION_STYLE_ASSIGNMENT((#314531)); +#314531 = SURFACE_STYLE_USAGE(.BOTH.,#314532); +#314532 = SURFACE_SIDE_STYLE('',(#314533)); +#314533 = SURFACE_STYLE_FILL_AREA(#314534); +#314534 = FILL_AREA_STYLE('',(#314535)); +#314535 = FILL_AREA_STYLE_COLOUR('',#295697); +#314536 = STYLED_ITEM('color',(#314537),#4415); +#314537 = PRESENTATION_STYLE_ASSIGNMENT((#314538)); +#314538 = SURFACE_STYLE_USAGE(.BOTH.,#314539); +#314539 = SURFACE_SIDE_STYLE('',(#314540)); +#314540 = SURFACE_STYLE_FILL_AREA(#314541); +#314541 = FILL_AREA_STYLE('',(#314542)); +#314542 = FILL_AREA_STYLE_COLOUR('',#295697); +#314543 = STYLED_ITEM('color',(#314544),#4427); +#314544 = PRESENTATION_STYLE_ASSIGNMENT((#314545)); +#314545 = SURFACE_STYLE_USAGE(.BOTH.,#314546); +#314546 = SURFACE_SIDE_STYLE('',(#314547)); +#314547 = SURFACE_STYLE_FILL_AREA(#314548); +#314548 = FILL_AREA_STYLE('',(#314549)); +#314549 = FILL_AREA_STYLE_COLOUR('',#295697); +#314550 = STYLED_ITEM('color',(#314551),#4444); +#314551 = PRESENTATION_STYLE_ASSIGNMENT((#314552)); +#314552 = SURFACE_STYLE_USAGE(.BOTH.,#314553); +#314553 = SURFACE_SIDE_STYLE('',(#314554)); +#314554 = SURFACE_STYLE_FILL_AREA(#314555); +#314555 = FILL_AREA_STYLE('',(#314556)); +#314556 = FILL_AREA_STYLE_COLOUR('',#295697); +#314557 = STYLED_ITEM('color',(#314558),#4470); +#314558 = PRESENTATION_STYLE_ASSIGNMENT((#314559)); +#314559 = SURFACE_STYLE_USAGE(.BOTH.,#314560); +#314560 = SURFACE_SIDE_STYLE('',(#314561)); +#314561 = SURFACE_STYLE_FILL_AREA(#314562); +#314562 = FILL_AREA_STYLE('',(#314563)); +#314563 = FILL_AREA_STYLE_COLOUR('',#295697); +#314564 = STYLED_ITEM('color',(#314565),#4503); +#314565 = PRESENTATION_STYLE_ASSIGNMENT((#314566)); +#314566 = SURFACE_STYLE_USAGE(.BOTH.,#314567); +#314567 = SURFACE_SIDE_STYLE('',(#314568)); +#314568 = SURFACE_STYLE_FILL_AREA(#314569); +#314569 = FILL_AREA_STYLE('',(#314570)); +#314570 = FILL_AREA_STYLE_COLOUR('',#295697); +#314571 = STYLED_ITEM('color',(#314572),#4534); +#314572 = PRESENTATION_STYLE_ASSIGNMENT((#314573)); +#314573 = SURFACE_STYLE_USAGE(.BOTH.,#314574); +#314574 = SURFACE_SIDE_STYLE('',(#314575)); +#314575 = SURFACE_STYLE_FILL_AREA(#314576); +#314576 = FILL_AREA_STYLE('',(#314577)); +#314577 = FILL_AREA_STYLE_COLOUR('',#295697); +#314578 = STYLED_ITEM('color',(#314579),#4558); +#314579 = PRESENTATION_STYLE_ASSIGNMENT((#314580)); +#314580 = SURFACE_STYLE_USAGE(.BOTH.,#314581); +#314581 = SURFACE_SIDE_STYLE('',(#314582)); +#314582 = SURFACE_STYLE_FILL_AREA(#314583); +#314583 = FILL_AREA_STYLE('',(#314584)); +#314584 = FILL_AREA_STYLE_COLOUR('',#295697); +#314585 = STYLED_ITEM('color',(#314586),#4582); +#314586 = PRESENTATION_STYLE_ASSIGNMENT((#314587)); +#314587 = SURFACE_STYLE_USAGE(.BOTH.,#314588); +#314588 = SURFACE_SIDE_STYLE('',(#314589)); +#314589 = SURFACE_STYLE_FILL_AREA(#314590); +#314590 = FILL_AREA_STYLE('',(#314591)); +#314591 = FILL_AREA_STYLE_COLOUR('',#295697); +#314592 = STYLED_ITEM('color',(#314593),#4599); +#314593 = PRESENTATION_STYLE_ASSIGNMENT((#314594)); +#314594 = SURFACE_STYLE_USAGE(.BOTH.,#314595); +#314595 = SURFACE_SIDE_STYLE('',(#314596)); +#314596 = SURFACE_STYLE_FILL_AREA(#314597); +#314597 = FILL_AREA_STYLE('',(#314598)); +#314598 = FILL_AREA_STYLE_COLOUR('',#295697); +#314599 = STYLED_ITEM('color',(#314600),#4646); +#314600 = PRESENTATION_STYLE_ASSIGNMENT((#314601)); +#314601 = SURFACE_STYLE_USAGE(.BOTH.,#314602); +#314602 = SURFACE_SIDE_STYLE('',(#314603)); +#314603 = SURFACE_STYLE_FILL_AREA(#314604); +#314604 = FILL_AREA_STYLE('',(#314605)); +#314605 = FILL_AREA_STYLE_COLOUR('',#295697); +#314606 = STYLED_ITEM('color',(#314607),#4677); +#314607 = PRESENTATION_STYLE_ASSIGNMENT((#314608)); +#314608 = SURFACE_STYLE_USAGE(.BOTH.,#314609); +#314609 = SURFACE_SIDE_STYLE('',(#314610)); +#314610 = SURFACE_STYLE_FILL_AREA(#314611); +#314611 = FILL_AREA_STYLE('',(#314612)); +#314612 = FILL_AREA_STYLE_COLOUR('',#295697); +#314613 = STYLED_ITEM('color',(#314614),#4689); +#314614 = PRESENTATION_STYLE_ASSIGNMENT((#314615)); +#314615 = SURFACE_STYLE_USAGE(.BOTH.,#314616); +#314616 = SURFACE_SIDE_STYLE('',(#314617)); +#314617 = SURFACE_STYLE_FILL_AREA(#314618); +#314618 = FILL_AREA_STYLE('',(#314619)); +#314619 = FILL_AREA_STYLE_COLOUR('',#295697); +#314620 = STYLED_ITEM('color',(#314621),#4706); +#314621 = PRESENTATION_STYLE_ASSIGNMENT((#314622)); +#314622 = SURFACE_STYLE_USAGE(.BOTH.,#314623); +#314623 = SURFACE_SIDE_STYLE('',(#314624)); +#314624 = SURFACE_STYLE_FILL_AREA(#314625); +#314625 = FILL_AREA_STYLE('',(#314626)); +#314626 = FILL_AREA_STYLE_COLOUR('',#295697); +#314627 = STYLED_ITEM('color',(#314628),#4732); +#314628 = PRESENTATION_STYLE_ASSIGNMENT((#314629)); +#314629 = SURFACE_STYLE_USAGE(.BOTH.,#314630); +#314630 = SURFACE_SIDE_STYLE('',(#314631)); +#314631 = SURFACE_STYLE_FILL_AREA(#314632); +#314632 = FILL_AREA_STYLE('',(#314633)); +#314633 = FILL_AREA_STYLE_COLOUR('',#295697); +#314634 = STYLED_ITEM('color',(#314635),#4765); +#314635 = PRESENTATION_STYLE_ASSIGNMENT((#314636)); +#314636 = SURFACE_STYLE_USAGE(.BOTH.,#314637); +#314637 = SURFACE_SIDE_STYLE('',(#314638)); +#314638 = SURFACE_STYLE_FILL_AREA(#314639); +#314639 = FILL_AREA_STYLE('',(#314640)); +#314640 = FILL_AREA_STYLE_COLOUR('',#295697); +#314641 = STYLED_ITEM('color',(#314642),#4777); +#314642 = PRESENTATION_STYLE_ASSIGNMENT((#314643)); +#314643 = SURFACE_STYLE_USAGE(.BOTH.,#314644); +#314644 = SURFACE_SIDE_STYLE('',(#314645)); +#314645 = SURFACE_STYLE_FILL_AREA(#314646); +#314646 = FILL_AREA_STYLE('',(#314647)); +#314647 = FILL_AREA_STYLE_COLOUR('',#295697); +#314648 = STYLED_ITEM('color',(#314649),#4789); +#314649 = PRESENTATION_STYLE_ASSIGNMENT((#314650)); +#314650 = SURFACE_STYLE_USAGE(.BOTH.,#314651); +#314651 = SURFACE_SIDE_STYLE('',(#314652)); +#314652 = SURFACE_STYLE_FILL_AREA(#314653); +#314653 = FILL_AREA_STYLE('',(#314654)); +#314654 = FILL_AREA_STYLE_COLOUR('',#295697); +#314655 = STYLED_ITEM('color',(#314656),#4801); +#314656 = PRESENTATION_STYLE_ASSIGNMENT((#314657)); +#314657 = SURFACE_STYLE_USAGE(.BOTH.,#314658); +#314658 = SURFACE_SIDE_STYLE('',(#314659)); +#314659 = SURFACE_STYLE_FILL_AREA(#314660); +#314660 = FILL_AREA_STYLE('',(#314661)); +#314661 = FILL_AREA_STYLE_COLOUR('',#295697); +#314662 = STYLED_ITEM('color',(#314663),#4818); +#314663 = PRESENTATION_STYLE_ASSIGNMENT((#314664)); +#314664 = SURFACE_STYLE_USAGE(.BOTH.,#314665); +#314665 = SURFACE_SIDE_STYLE('',(#314666)); +#314666 = SURFACE_STYLE_FILL_AREA(#314667); +#314667 = FILL_AREA_STYLE('',(#314668)); +#314668 = FILL_AREA_STYLE_COLOUR('',#295697); +#314669 = STYLED_ITEM('color',(#314670),#4835); +#314670 = PRESENTATION_STYLE_ASSIGNMENT((#314671)); +#314671 = SURFACE_STYLE_USAGE(.BOTH.,#314672); +#314672 = SURFACE_SIDE_STYLE('',(#314673)); +#314673 = SURFACE_STYLE_FILL_AREA(#314674); +#314674 = FILL_AREA_STYLE('',(#314675)); +#314675 = FILL_AREA_STYLE_COLOUR('',#295697); +#314676 = STYLED_ITEM('color',(#314677),#4847); +#314677 = PRESENTATION_STYLE_ASSIGNMENT((#314678)); +#314678 = SURFACE_STYLE_USAGE(.BOTH.,#314679); +#314679 = SURFACE_SIDE_STYLE('',(#314680)); +#314680 = SURFACE_STYLE_FILL_AREA(#314681); +#314681 = FILL_AREA_STYLE('',(#314682)); +#314682 = FILL_AREA_STYLE_COLOUR('',#295697); +#314683 = STYLED_ITEM('color',(#314684),#4859); +#314684 = PRESENTATION_STYLE_ASSIGNMENT((#314685)); +#314685 = SURFACE_STYLE_USAGE(.BOTH.,#314686); +#314686 = SURFACE_SIDE_STYLE('',(#314687)); +#314687 = SURFACE_STYLE_FILL_AREA(#314688); +#314688 = FILL_AREA_STYLE('',(#314689)); +#314689 = FILL_AREA_STYLE_COLOUR('',#295697); +#314690 = STYLED_ITEM('color',(#314691),#4876); +#314691 = PRESENTATION_STYLE_ASSIGNMENT((#314692)); +#314692 = SURFACE_STYLE_USAGE(.BOTH.,#314693); +#314693 = SURFACE_SIDE_STYLE('',(#314694)); +#314694 = SURFACE_STYLE_FILL_AREA(#314695); +#314695 = FILL_AREA_STYLE('',(#314696)); +#314696 = FILL_AREA_STYLE_COLOUR('',#295697); +#314697 = STYLED_ITEM('color',(#314698),#4893); +#314698 = PRESENTATION_STYLE_ASSIGNMENT((#314699)); +#314699 = SURFACE_STYLE_USAGE(.BOTH.,#314700); +#314700 = SURFACE_SIDE_STYLE('',(#314701)); +#314701 = SURFACE_STYLE_FILL_AREA(#314702); +#314702 = FILL_AREA_STYLE('',(#314703)); +#314703 = FILL_AREA_STYLE_COLOUR('',#295697); +#314704 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #314705,#314712,#314719,#314726,#314733,#314740,#314747,#314754, + #314761,#314768,#314775,#314782,#314789,#314796,#314803,#314810, + #314817,#314824,#314831,#314838,#314845,#314852,#314859,#314866, + #314873,#314880,#314887,#314894),#66521); +#314705 = STYLED_ITEM('color',(#314706),#65669); +#314706 = PRESENTATION_STYLE_ASSIGNMENT((#314707)); +#314707 = SURFACE_STYLE_USAGE(.BOTH.,#314708); +#314708 = SURFACE_SIDE_STYLE('',(#314709)); +#314709 = SURFACE_STYLE_FILL_AREA(#314710); +#314710 = FILL_AREA_STYLE('',(#314711)); +#314711 = FILL_AREA_STYLE_COLOUR('',#270441); +#314712 = STYLED_ITEM('color',(#314713),#65745); +#314713 = PRESENTATION_STYLE_ASSIGNMENT((#314714)); +#314714 = SURFACE_STYLE_USAGE(.BOTH.,#314715); +#314715 = SURFACE_SIDE_STYLE('',(#314716)); +#314716 = SURFACE_STYLE_FILL_AREA(#314717); +#314717 = FILL_AREA_STYLE('',(#314718)); +#314718 = FILL_AREA_STYLE_COLOUR('',#270441); +#314719 = STYLED_ITEM('color',(#314720),#65776); +#314720 = PRESENTATION_STYLE_ASSIGNMENT((#314721)); +#314721 = SURFACE_STYLE_USAGE(.BOTH.,#314722); +#314722 = SURFACE_SIDE_STYLE('',(#314723)); +#314723 = SURFACE_STYLE_FILL_AREA(#314724); +#314724 = FILL_AREA_STYLE('',(#314725)); +#314725 = FILL_AREA_STYLE_COLOUR('',#270441); +#314726 = STYLED_ITEM('color',(#314727),#65801); +#314727 = PRESENTATION_STYLE_ASSIGNMENT((#314728)); +#314728 = SURFACE_STYLE_USAGE(.BOTH.,#314729); +#314729 = SURFACE_SIDE_STYLE('',(#314730)); +#314730 = SURFACE_STYLE_FILL_AREA(#314731); +#314731 = FILL_AREA_STYLE('',(#314732)); +#314732 = FILL_AREA_STYLE_COLOUR('',#270441); +#314733 = STYLED_ITEM('color',(#314734),#65826); +#314734 = PRESENTATION_STYLE_ASSIGNMENT((#314735)); +#314735 = SURFACE_STYLE_USAGE(.BOTH.,#314736); +#314736 = SURFACE_SIDE_STYLE('',(#314737)); +#314737 = SURFACE_STYLE_FILL_AREA(#314738); +#314738 = FILL_AREA_STYLE('',(#314739)); +#314739 = FILL_AREA_STYLE_COLOUR('',#270441); +#314740 = STYLED_ITEM('color',(#314741),#65850); +#314741 = PRESENTATION_STYLE_ASSIGNMENT((#314742)); +#314742 = SURFACE_STYLE_USAGE(.BOTH.,#314743); +#314743 = SURFACE_SIDE_STYLE('',(#314744)); +#314744 = SURFACE_STYLE_FILL_AREA(#314745); +#314745 = FILL_AREA_STYLE('',(#314746)); +#314746 = FILL_AREA_STYLE_COLOUR('',#270441); +#314747 = STYLED_ITEM('color',(#314748),#65874); +#314748 = PRESENTATION_STYLE_ASSIGNMENT((#314749)); +#314749 = SURFACE_STYLE_USAGE(.BOTH.,#314750); +#314750 = SURFACE_SIDE_STYLE('',(#314751)); +#314751 = SURFACE_STYLE_FILL_AREA(#314752); +#314752 = FILL_AREA_STYLE('',(#314753)); +#314753 = FILL_AREA_STYLE_COLOUR('',#270441); +#314754 = STYLED_ITEM('color',(#314755),#65899); +#314755 = PRESENTATION_STYLE_ASSIGNMENT((#314756)); +#314756 = SURFACE_STYLE_USAGE(.BOTH.,#314757); +#314757 = SURFACE_SIDE_STYLE('',(#314758)); +#314758 = SURFACE_STYLE_FILL_AREA(#314759); +#314759 = FILL_AREA_STYLE('',(#314760)); +#314760 = FILL_AREA_STYLE_COLOUR('',#270441); +#314761 = STYLED_ITEM('color',(#314762),#65924); +#314762 = PRESENTATION_STYLE_ASSIGNMENT((#314763)); +#314763 = SURFACE_STYLE_USAGE(.BOTH.,#314764); +#314764 = SURFACE_SIDE_STYLE('',(#314765)); +#314765 = SURFACE_STYLE_FILL_AREA(#314766); +#314766 = FILL_AREA_STYLE('',(#314767)); +#314767 = FILL_AREA_STYLE_COLOUR('',#270441); +#314768 = STYLED_ITEM('color',(#314769),#65941); +#314769 = PRESENTATION_STYLE_ASSIGNMENT((#314770)); +#314770 = SURFACE_STYLE_USAGE(.BOTH.,#314771); +#314771 = SURFACE_SIDE_STYLE('',(#314772)); +#314772 = SURFACE_STYLE_FILL_AREA(#314773); +#314773 = FILL_AREA_STYLE('',(#314774)); +#314774 = FILL_AREA_STYLE_COLOUR('',#270441); +#314775 = STYLED_ITEM('color',(#314776),#66027); +#314776 = PRESENTATION_STYLE_ASSIGNMENT((#314777)); +#314777 = SURFACE_STYLE_USAGE(.BOTH.,#314778); +#314778 = SURFACE_SIDE_STYLE('',(#314779)); +#314779 = SURFACE_STYLE_FILL_AREA(#314780); +#314780 = FILL_AREA_STYLE('',(#314781)); +#314781 = FILL_AREA_STYLE_COLOUR('',#296077); +#314782 = STYLED_ITEM('color',(#314783),#66059); +#314783 = PRESENTATION_STYLE_ASSIGNMENT((#314784)); +#314784 = SURFACE_STYLE_USAGE(.BOTH.,#314785); +#314785 = SURFACE_SIDE_STYLE('',(#314786)); +#314786 = SURFACE_STYLE_FILL_AREA(#314787); +#314787 = FILL_AREA_STYLE('',(#314788)); +#314788 = FILL_AREA_STYLE_COLOUR('',#296077); +#314789 = STYLED_ITEM('color',(#314790),#66083); +#314790 = PRESENTATION_STYLE_ASSIGNMENT((#314791)); +#314791 = SURFACE_STYLE_USAGE(.BOTH.,#314792); +#314792 = SURFACE_SIDE_STYLE('',(#314793)); +#314793 = SURFACE_STYLE_FILL_AREA(#314794); +#314794 = FILL_AREA_STYLE('',(#314795)); +#314795 = FILL_AREA_STYLE_COLOUR('',#296077); +#314796 = STYLED_ITEM('color',(#314797),#66108); +#314797 = PRESENTATION_STYLE_ASSIGNMENT((#314798)); +#314798 = SURFACE_STYLE_USAGE(.BOTH.,#314799); +#314799 = SURFACE_SIDE_STYLE('',(#314800)); +#314800 = SURFACE_STYLE_FILL_AREA(#314801); +#314801 = FILL_AREA_STYLE('',(#314802)); +#314802 = FILL_AREA_STYLE_COLOUR('',#296077); +#314803 = STYLED_ITEM('color',(#314804),#66132); +#314804 = PRESENTATION_STYLE_ASSIGNMENT((#314805)); +#314805 = SURFACE_STYLE_USAGE(.BOTH.,#314806); +#314806 = SURFACE_SIDE_STYLE('',(#314807)); +#314807 = SURFACE_STYLE_FILL_AREA(#314808); +#314808 = FILL_AREA_STYLE('',(#314809)); +#314809 = FILL_AREA_STYLE_COLOUR('',#296077); +#314810 = STYLED_ITEM('color',(#314811),#66157); +#314811 = PRESENTATION_STYLE_ASSIGNMENT((#314812)); +#314812 = SURFACE_STYLE_USAGE(.BOTH.,#314813); +#314813 = SURFACE_SIDE_STYLE('',(#314814)); +#314814 = SURFACE_STYLE_FILL_AREA(#314815); +#314815 = FILL_AREA_STYLE('',(#314816)); +#314816 = FILL_AREA_STYLE_COLOUR('',#296077); +#314817 = STYLED_ITEM('color',(#314818),#66181); +#314818 = PRESENTATION_STYLE_ASSIGNMENT((#314819)); +#314819 = SURFACE_STYLE_USAGE(.BOTH.,#314820); +#314820 = SURFACE_SIDE_STYLE('',(#314821)); +#314821 = SURFACE_STYLE_FILL_AREA(#314822); +#314822 = FILL_AREA_STYLE('',(#314823)); +#314823 = FILL_AREA_STYLE_COLOUR('',#296077); +#314824 = STYLED_ITEM('color',(#314825),#66206); +#314825 = PRESENTATION_STYLE_ASSIGNMENT((#314826)); +#314826 = SURFACE_STYLE_USAGE(.BOTH.,#314827); +#314827 = SURFACE_SIDE_STYLE('',(#314828)); +#314828 = SURFACE_STYLE_FILL_AREA(#314829); +#314829 = FILL_AREA_STYLE('',(#314830)); +#314830 = FILL_AREA_STYLE_COLOUR('',#296077); +#314831 = STYLED_ITEM('color',(#314832),#66223); +#314832 = PRESENTATION_STYLE_ASSIGNMENT((#314833)); +#314833 = SURFACE_STYLE_USAGE(.BOTH.,#314834); +#314834 = SURFACE_SIDE_STYLE('',(#314835)); +#314835 = SURFACE_STYLE_FILL_AREA(#314836); +#314836 = FILL_AREA_STYLE('',(#314837)); +#314837 = FILL_AREA_STYLE_COLOUR('',#270441); +#314838 = STYLED_ITEM('color',(#314839),#66309); +#314839 = PRESENTATION_STYLE_ASSIGNMENT((#314840)); +#314840 = SURFACE_STYLE_USAGE(.BOTH.,#314841); +#314841 = SURFACE_SIDE_STYLE('',(#314842)); +#314842 = SURFACE_STYLE_FILL_AREA(#314843); +#314843 = FILL_AREA_STYLE('',(#314844)); +#314844 = FILL_AREA_STYLE_COLOUR('',#270441); +#314845 = STYLED_ITEM('color',(#314846),#66340); +#314846 = PRESENTATION_STYLE_ASSIGNMENT((#314847)); +#314847 = SURFACE_STYLE_USAGE(.BOTH.,#314848); +#314848 = SURFACE_SIDE_STYLE('',(#314849)); +#314849 = SURFACE_STYLE_FILL_AREA(#314850); +#314850 = FILL_AREA_STYLE('',(#314851)); +#314851 = FILL_AREA_STYLE_COLOUR('',#270441); +#314852 = STYLED_ITEM('color',(#314853),#66365); +#314853 = PRESENTATION_STYLE_ASSIGNMENT((#314854)); +#314854 = SURFACE_STYLE_USAGE(.BOTH.,#314855); +#314855 = SURFACE_SIDE_STYLE('',(#314856)); +#314856 = SURFACE_STYLE_FILL_AREA(#314857); +#314857 = FILL_AREA_STYLE('',(#314858)); +#314858 = FILL_AREA_STYLE_COLOUR('',#270441); +#314859 = STYLED_ITEM('color',(#314860),#66390); +#314860 = PRESENTATION_STYLE_ASSIGNMENT((#314861)); +#314861 = SURFACE_STYLE_USAGE(.BOTH.,#314862); +#314862 = SURFACE_SIDE_STYLE('',(#314863)); +#314863 = SURFACE_STYLE_FILL_AREA(#314864); +#314864 = FILL_AREA_STYLE('',(#314865)); +#314865 = FILL_AREA_STYLE_COLOUR('',#270441); +#314866 = STYLED_ITEM('color',(#314867),#66414); +#314867 = PRESENTATION_STYLE_ASSIGNMENT((#314868)); +#314868 = SURFACE_STYLE_USAGE(.BOTH.,#314869); +#314869 = SURFACE_SIDE_STYLE('',(#314870)); +#314870 = SURFACE_STYLE_FILL_AREA(#314871); +#314871 = FILL_AREA_STYLE('',(#314872)); +#314872 = FILL_AREA_STYLE_COLOUR('',#270441); +#314873 = STYLED_ITEM('color',(#314874),#66438); +#314874 = PRESENTATION_STYLE_ASSIGNMENT((#314875)); +#314875 = SURFACE_STYLE_USAGE(.BOTH.,#314876); +#314876 = SURFACE_SIDE_STYLE('',(#314877)); +#314877 = SURFACE_STYLE_FILL_AREA(#314878); +#314878 = FILL_AREA_STYLE('',(#314879)); +#314879 = FILL_AREA_STYLE_COLOUR('',#270441); +#314880 = STYLED_ITEM('color',(#314881),#66463); +#314881 = PRESENTATION_STYLE_ASSIGNMENT((#314882)); +#314882 = SURFACE_STYLE_USAGE(.BOTH.,#314883); +#314883 = SURFACE_SIDE_STYLE('',(#314884)); +#314884 = SURFACE_STYLE_FILL_AREA(#314885); +#314885 = FILL_AREA_STYLE('',(#314886)); +#314886 = FILL_AREA_STYLE_COLOUR('',#270441); +#314887 = STYLED_ITEM('color',(#314888),#66488); +#314888 = PRESENTATION_STYLE_ASSIGNMENT((#314889)); +#314889 = SURFACE_STYLE_USAGE(.BOTH.,#314890); +#314890 = SURFACE_SIDE_STYLE('',(#314891)); +#314891 = SURFACE_STYLE_FILL_AREA(#314892); +#314892 = FILL_AREA_STYLE('',(#314893)); +#314893 = FILL_AREA_STYLE_COLOUR('',#270441); +#314894 = STYLED_ITEM('color',(#314895),#66505); +#314895 = PRESENTATION_STYLE_ASSIGNMENT((#314896)); +#314896 = SURFACE_STYLE_USAGE(.BOTH.,#314897); +#314897 = SURFACE_SIDE_STYLE('',(#314898)); +#314898 = SURFACE_STYLE_FILL_AREA(#314899); +#314899 = FILL_AREA_STYLE('',(#314900)); +#314900 = FILL_AREA_STYLE_COLOUR('',#270441); +ENDSEC; +END-ISO-10303-21; diff --git a/03-Architecture-Hardware/kicad/LatestDRC1425.rpt b/03-Architecture-Hardware/kicad/LatestDRC1425.rpt new file mode 100644 index 0000000..53296be --- /dev/null +++ b/03-Architecture-Hardware/kicad/LatestDRC1425.rpt @@ -0,0 +1,357 @@ +** Drc report for hbox-watchdog-v3-PROD.kicad_pcb ** +** Created on 2026-07-06T14:25:58 ** +** Report includes: Warnings ** + +** Found 9 DRC violations ** +[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST' + Local override; warning + @(210.1917 mm, 61.8231 mm): Footprint P6 +[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST' + Local override; warning + @(210.1667 mm, 80.0731 mm): Footprint P10 +[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity' + Local override; warning + @(124.1916 mm, 118.3231 mm): Footprint U3 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(85.1916 mm, 135.3231 mm): Footprint MH3 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(211.1917 mm, 135.3231 mm): Footprint MH4 +[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST' + Local override; warning + @(210.1667 mm, 70.8231 mm): Footprint P8 +[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix' + Local override; warning + @(172.6917 mm, 133.8231 mm): Footprint P1 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(211.1917 mm, 45.3231 mm): Footprint MH2 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(85.1916 mm, 45.3231 mm): Footprint MH1 + +** Found 0 unconnected pads ** + +** Found 113 Footprint errors ** +[net_conflict]: Pad net (IGN_SENSE) doesn't match net given by schematic (/IGN_SENSE) + Local override; warning + @(100.8166 mm, 83.3231 mm): Pad 1 [IGN_SENSE] of C9 on F.Cu +[net_conflict]: Pad net (24V) doesn't match net given by schematic (/24V) + Local override; warning + @(86.9917 mm, 71.8231 mm): Pad 1 [24V] of C10 on F.Cu +[net_conflict]: Pad net (24V) doesn't match net given by schematic (/24V) + Local override; warning + @(161.4167 mm, 51.2231 mm): Pad 1 [24V] of C11 on F.Cu +[net_conflict]: Pad net (24V) doesn't match net given by schematic (/24V) + Local override; warning + @(161.6917 mm, 46.7731 mm): Pad 1 [24V] of C22 on F.Cu +[missing_footprint]: Missing footprint Cbst1 (10nF) + Local override; warning +[missing_footprint]: Missing footprint Ccomp1 (2.2nF) + Local override; warning +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(132.1416 mm, 112.3231 mm): Pad 1 [3V3] of Cu3 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(136.1416 mm, 112.3231 mm): Pad 1 [3V3] of Cu4 on F.Cu +[missing_footprint]: Missing footprint D4G1 (LED) + Local override; warning +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(93.5417 mm, 83.3231 mm): Pad 1 [3V3] of D5 on F.Cu +[net_conflict]: Pad net (IGN_SENSE) doesn't match net given by schematic (/IGN_SENSE) + Local override; warning + @(96.8417 mm, 83.3231 mm): Pad 2 [IGN_SENSE] of D5 on F.Cu +[missing_footprint]: Missing footprint Dbk1 (SS34) + Local override; warning +[missing_footprint]: Missing footprint DzG1 (BZX84C15) + Local override; warning +[net_conflict]: Pad net (USART1_RX) doesn't match net given by schematic (/USART1_RX) + Local override; warning + @(111.1916 mm, 48.8631 mm): PTH pad 2 [USART1_RX] of H3 +[net_conflict]: Pad net (IGN_SENSE) doesn't match net given by schematic (/IGN_SENSE) + Local override; warning + @(132.5916 mm, 56.3231 mm): PTH pad 11 [IGN_SENSE] of J1 +[net_conflict]: Pad net (FAN_PWM) doesn't match net given by schematic (/FAN_PWM) + Local override; warning + @(135.1317 mm, 56.3231 mm): PTH pad 12 [FAN_PWM] of J1 +[net_conflict]: Pad net (EXT_LED) doesn't match net given by schematic (/EXT_LED) + Local override; warning + @(140.2116 mm, 56.3231 mm): PTH pad 14 [EXT_LED] of J1 +[net_conflict]: Pad net (FAN_TACH) doesn't match net given by schematic (/FAN_TACH) + Local override; warning + @(147.8316 mm, 56.3231 mm): PTH pad 17 [FAN_TACH] of J1 +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(150.3716 mm, 56.3231 mm): PTH pad 18 [3V3] of J1 +[net_conflict]: Pad net (USART1_RX) doesn't match net given by schematic (/USART1_RX) + Local override; warning + @(122.4317 mm, 74.1031 mm): PTH pad 7 [USART1_RX] of J2 +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(155.4517 mm, 74.1031 mm): PTH pad 20 [3V3] of J2 +[net_conflict]: Pad net (USART1_RX) doesn't match net given by schematic (/USART1_RX) + Local override; warning + @(189.2842 mm, 55.8656 mm): PTH pad 1 [USART1_RX] of K1 +[net_conflict]: Pad net (SW_FAN) doesn't match net given by schematic (/SW_FAN) + Local override; warning + @(183.3916 mm, 47.8231 mm): Pad 1 [SW_FAN] of L2 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(117.7917 mm, 129.5831 mm): PTH pad 2 [3V3] of MOD1 +[net_conflict]: Pad net (USART1_RX) doesn't match net given by schematic (/USART1_RX) + Local override; warning + @(128.9717 mm, 81.3231 mm): PTH pad 23 [USART1_RX] of MOD1 +[net_conflict]: Pad net (IGN_IN) doesn't match net given by schematic (/IGN_IN) + Local override; warning + @(182.6917 mm, 133.8231 mm): PTH pad 3 [IGN_IN] of P1 +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(98.1916 mm, 46.3231 mm): PTH pad 1 [3V3] of P5 +[net_conflict]: Pad net (FAN_TACH_RAW) doesn't match net given by schematic (/FAN_TACH_RAW) + Local override; warning + @(210.1917 mm, 54.3231 mm): PTH pad 4 [FAN_TACH_RAW] of P6 +[net_conflict]: Pad net (USART1_RX) doesn't match net given by schematic (/USART1_RX) + Local override; warning + @(116.1916 mm, 46.3231 mm): PTH pad 1 [USART1_RX] of P13 +[missing_footprint]: Missing footprint PF1 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF2 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF3 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF4 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF5 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF6 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF7 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF8 (PWR_FLAG) + Local override; warning +[missing_footprint]: Missing footprint PF9 (PWR_FLAG) + Local override; warning +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(137.7125 mm, 59.9500 mm): Pad 1 [/GATE_LS] of Q1 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(137.7125 mm, 61.8500 mm): Pad 2 [/SW_IN] of Q1 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(139.5875 mm, 60.9000 mm): Pad 3 [/SW_5V] of Q1 on F.Cu +[net_conflict]: No pad found for pin G (/GATE_LS) in schematic + Local override; warning + @(138.6500 mm, 60.9000 mm): Footprint Q1 +[net_conflict]: No pad found for pin D (/SW_5V) in schematic + Local override; warning + @(138.6500 mm, 60.9000 mm): Footprint Q1 +[net_conflict]: No pad found for pin S (/SW_IN) in schematic + Local override; warning + @(138.6500 mm, 60.9000 mm): Footprint Q1 +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(105.2541 mm, 95.3731 mm): Pad 1 [FAN_GATE] of Q2 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(105.2541 mm, 97.2731 mm): Pad 2 [GND] of Q2 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(107.1291 mm, 96.3231 mm): Pad 3 [/FAN_RET] of Q2 on F.Cu +[net_conflict]: No pad found for pin G (/FAN_GATE) in schematic + Local override; warning + @(106.1916 mm, 96.3231 mm): Footprint Q2 +[net_conflict]: No pad found for pin D (/FAN_RET) in schematic + Local override; warning + @(106.1916 mm, 96.3231 mm): Footprint Q2 +[net_conflict]: No pad found for pin S (GND) in schematic + Local override; warning + @(106.1916 mm, 96.3231 mm): Footprint Q2 +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(91.8166 mm, 104.8731 mm): Pad 1 [EXT_LED] of Q4 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(91.8166 mm, 106.7731 mm): Pad 2 [GND] of Q4 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(93.6916 mm, 105.8231 mm): Pad 3 [/LED_K] of Q4 on F.Cu +[net_conflict]: No pad found for pin G (/EXT_LED) in schematic + Local override; warning + @(92.7541 mm, 105.8231 mm): Footprint Q4 +[net_conflict]: No pad found for pin D (/LED_K) in schematic + Local override; warning + @(92.7541 mm, 105.8231 mm): Footprint Q4 +[net_conflict]: No pad found for pin S (GND) in schematic + Local override; warning + @(92.7541 mm, 105.8231 mm): Footprint Q4 +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(85.1517 mm, 52.0431 mm): Pad 1 [Q10_GATE] of Q10 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(91.4517 mm, 54.3231 mm): Pad 2 [/24V_IN] of Q10 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(85.1517 mm, 56.6031 mm): Pad 3 [24V] of Q10 on F.Cu +[net_conflict]: No pad found for pin S (/24V) in schematic + Local override; warning + @(90.1916 mm, 54.3231 mm): Footprint Q10 +[net_conflict]: No pad found for pin D (/24V_IN) in schematic + Local override; warning + @(90.1916 mm, 54.3231 mm): Footprint Q10 +[net_conflict]: No pad found for pin G (/Q10_GATE) in schematic + Local override; warning + @(90.1916 mm, 54.3231 mm): Footprint Q10 +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(97.0417 mm, 107.3231 mm): Pad 1 [3V3] of R3 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(124.0917 mm, 112.3231 mm): Pad 1 [3V3] of R30 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(128.0916 mm, 112.3231 mm): Pad 1 [3V3] of R31 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(114.0917 mm, 112.3231 mm): Pad 1 [3V3] of R42 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(134.0417 mm, 99.8231 mm): Pad 1 [3V3] of R57 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(134.1667 mm, 104.3231 mm): Pad 1 [3V3] of R58 on F.Cu +[missing_footprint]: Missing footprint Rcomp1 (40.2k) + Local override; warning +[missing_footprint]: Missing footprint Rdfu1 (22k) + Local override; warning +[net_conflict]: Pad net (24V) doesn't match net given by schematic (/24V) + Local override; warning + @(173.3666 mm, 59.3231 mm): Pad 1 [24V] of Ren1 on F.Cu +[missing_footprint]: Missing footprint Rfreq1 (100k) + Local override; warning +[missing_footprint]: Missing footprint Rg1 (100R) + Local override; warning +[missing_footprint]: Missing footprint Rgs1 (100k) + Local override; warning +[missing_footprint]: Missing footprint Rig1 (22k) + Local override; warning +[missing_footprint]: Missing footprint Rigb1 (10k) + Local override; warning +[missing_footprint]: Missing footprint Rled1 (10k) + Local override; warning +[missing_footprint]: Missing footprint Rmled1 (1k) + Local override; warning +[missing_footprint]: Missing footprint Rrp1 (10k) + Local override; warning +[missing_footprint]: Missing footprint Rtp1 (10k) + Local override; warning +[missing_footprint]: Missing footprint Rts1 (1k) + Local override; warning +[missing_footprint]: Missing footprint SW4G1 (RESET) + Local override; warning +[net_conflict]: Pad net (SW_FAN) doesn't match net given by schematic (/SW_FAN) + Local override; warning + @(171.6917 mm, 54.6331 mm): Pad 1 [SW_FAN] of U2 on F.Cu +[net_conflict]: Pad net (COMP_FAN) doesn't match net given by schematic (/COMP_FAN) + Local override; warning + @(171.6917 mm, 52.0931 mm): Pad 3 [COMP_FAN] of U2 on F.Cu +[net_conflict]: Pad net (FREQ_FAN) doesn't match net given by schematic (/FREQ_FAN) + Local override; warning + @(166.7416 mm, 52.0931 mm): Pad 6 [FREQ_FAN] of U2 on F.Cu +[net_conflict]: Pad net (24V) doesn't match net given by schematic (/24V) + Local override; warning + @(166.7416 mm, 53.3631 mm): Pad 7 [24V] of U2 on F.Cu +[net_conflict]: Pad net (BST_FAN) doesn't match net given by schematic (/BST_FAN) + Local override; warning + @(166.7416 mm, 54.6331 mm): Pad 8 [BST_FAN] of U2 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(169.2166 mm, 52.7281 mm): Pad 9 [GND] of U2 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(124.8916 mm, 118.7231 mm): Pad 3 [3V3] of U3 on F.Cu +[net_conflict]: Pad net (3V3) doesn't match net given by schematic (/3V3) + Local override; warning + @(131.0241 mm, 117.6731 mm): Pad 5 [3V3] of U4 on F.Cu +[net_conflict]: No corresponding pin found in schematic + Local override; warning + @(197.6216 mm, 112.5731 mm): Pad 9 [GND] of U7 on F.Cu +[extra_footprint]: Extra footprint + Local override; warning + @(101.3667 mm, 74.3231 mm): Footprint Rigb +[extra_footprint]: Extra footprint + Local override; warning + @(168.1917 mm, 65.8231 mm): Footprint Dbk +[extra_footprint]: Extra footprint + Local override; warning + @(175.8416 mm, 53.4731 mm): Footprint Ccomp +[extra_footprint]: Extra footprint + Local override; warning + @(94.1916 mm, 94.3231 mm): Footprint Rg +[extra_footprint]: Extra footprint + Local override; warning + @(203.0500 mm, 84.4500 mm): Footprint Rmled +[extra_footprint]: Extra footprint + Local override; warning + @(110.9167 mm, 112.3231 mm): Footprint Rdfu +[extra_footprint]: Extra footprint + Local override; warning + @(85.1916 mm, 135.3231 mm): Footprint MH3 +[extra_footprint]: Extra footprint + Local override; warning + @(175.8416 mm, 48.6231 mm): Footprint Rcomp +[extra_footprint]: Extra footprint + Local override; warning + @(211.1917 mm, 135.3231 mm): Footprint MH4 +[extra_footprint]: Extra footprint + Local override; warning + @(96.8667 mm, 102.3231 mm): Footprint Rts +[extra_footprint]: Extra footprint + Local override; warning + @(168.4167 mm, 45.3231 mm): Footprint Cbst +[extra_footprint]: Extra footprint + Local override; warning + @(148.1750 mm, 135.6000 mm): Footprint SW4G +[extra_footprint]: Extra footprint + Local override; warning + @(95.4167 mm, 112.3231 mm): Footprint Rled +[extra_footprint]: Extra footprint + Local override; warning + @(99.1916 mm, 94.3231 mm): Footprint Rgs +[extra_footprint]: Extra footprint + Local override; warning + @(100.8667 mm, 102.3231 mm): Footprint Rtp +[extra_footprint]: Extra footprint + Local override; warning + @(211.1917 mm, 45.3231 mm): Footprint MH2 +[extra_footprint]: Extra footprint + Local override; warning + @(99.1916 mm, 61.3231 mm): Footprint DzG +[extra_footprint]: Extra footprint + Local override; warning + @(85.1916 mm, 45.3231 mm): Footprint MH1 +[extra_footprint]: Extra footprint + Local override; warning + @(85.1916 mm, 61.3231 mm): Footprint Rrp +[extra_footprint]: Extra footprint + Local override; warning + @(161.1360 mm, 55.5552 mm): Footprint Rfreq +[extra_footprint]: Extra footprint + Local override; warning + @(101.3667 mm, 69.3231 mm): Footprint Rig +[extra_footprint]: Extra footprint + Local override; warning + @(203.1000 mm, 92.1000 mm): Footprint D4G + +** Ignored checks ** + - Footprint has no courtyard defined + - Track endpoint not centered on via + - Tuning profile track geometries + - Footprint doesn't match symbol's footprint filters + - Footprint component type doesn't match footprint pads + +** End of Report ** diff --git a/03-Architecture-Hardware/kicad/RUN-usb-autoroute-README.md b/03-Architecture-Hardware/kicad/RUN-usb-autoroute-README.md new file mode 100644 index 0000000..7b16648 --- /dev/null +++ b/03-Architecture-Hardware/kicad/RUN-usb-autoroute-README.md @@ -0,0 +1,38 @@ +# USB/reset/LED autoroute — run on your Mac, then import the .ses + +**DSN:** `hbox-watchdog-v3-PROD-usb.dsn` — the current 132-part board **with your existing +routing already in it** (1069 wires) + the 9 new nets unrouted. So FreeRouting starts with +"incomplete" ≈ the 9 new connections and should drive to **0** almost immediately — it's only +routing USB_VBUS/DP/DM, USB_CC1/CC2, MODEM_RST, MODEM_LED(_A). GND rides the In1 plane. + +Clearance 0.2 mm, width 0.2 mm (fine for these low-current USB/signal nets). + +## 1. Route it + +Headless (simplest): +```bash +cd "/Users/leo/Documents/Claude/Projects/Drogheda/03-Architecture-Hardware/kicad" +java -jar freerouting-1.9.0.jar \ + -de hbox-watchdog-v3-PROD-usb.dsn \ + -do hbox-watchdog-v3-PROD-usb.ses \ + -mp 30 +``` + +Or GUI (more control): `java -jar freerouting-1.9.0.jar` → **File → Open Design** → +`hbox-watchdog-v3-PROD-usb.dsn` → watch the **incomplete** count fall to 0 → **File → Export +Specctra Session File** → `hbox-watchdog-v3-PROD-usb.ses`. + +> The DSN carries your existing traces, so FreeRouting mostly just fills in the 9 new nets. If you +> want to be conservative and let it touch the existing routing as little as possible, stop as soon +> as incomplete hits 0 (GUI) — no need to let it grind optimization passes. + +## 2. Bring it back into KiCad +Open the board → **File → Import → Specctra Session** → `hbox-watchdog-v3-PROD-usb.ses` → +press **B** to refill the In1 GND plane → **Inspect → Design Rules Checker**. + +Paste me the DRC summary and I'll help clear anything real before you fab. **Do not run F8** — +the parts are already placed; you're only importing routing now. + +## 3. Fab +Re-export the JLCPCB package (Gerbers + drill + BOM + CPL), order as **4-layer** (F.Cu / In1 GND / +In2.Cu / B.Cu, JLC 1.6 mm standard). diff --git a/03-Architecture-Hardware/kicad/Untitled.pdf b/03-Architecture-Hardware/kicad/Untitled.pdf new file mode 100644 index 0000000..10e6534 Binary files /dev/null and b/03-Architecture-Hardware/kicad/Untitled.pdf differ diff --git a/03-Architecture-Hardware/kicad/_drc-20260706-regen.rpt b/03-Architecture-Hardware/kicad/_drc-20260706-regen.rpt new file mode 100644 index 0000000..0117aa9 --- /dev/null +++ b/03-Architecture-Hardware/kicad/_drc-20260706-regen.rpt @@ -0,0 +1,45 @@ +** Drc report for hbox-watchdog-v3-PROD.kicad_pcb ** +** Created on 2026-07-06T17:09:43 ** +** Report includes: Errors, Warnings ** + +** Found 9 DRC violations ** +[lib_footprint_mismatch]: Footprint 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical' does not match copy in library 'Connector_JST' + Local override; warning + @(210.1917 mm, 61.8231 mm): Footprint P6 +[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST' + Local override; warning + @(210.1667 mm, 80.0731 mm): Footprint P10 +[lib_footprint_mismatch]: Footprint 'Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad' does not match copy in library 'Sensor_Humidity' + Local override; warning + @(124.1916 mm, 118.3231 mm): Footprint U3 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(85.1916 mm, 135.3231 mm): Footprint MH3 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(211.1917 mm, 135.3231 mm): Footprint MH4 +[lib_footprint_mismatch]: Footprint 'JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical' does not match copy in library 'Connector_JST' + Local override; warning + @(210.1667 mm, 70.8231 mm): Footprint P8 +[lib_footprint_mismatch]: Footprint 'TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal' does not match copy in library 'TerminalBlock_Phoenix' + Local override; warning + @(172.6917 mm, 133.8231 mm): Footprint P1 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(211.1917 mm, 45.3231 mm): Footprint MH2 +[lib_footprint_issues]: Footprint 'MountingHole_3.2mm' not found in library 'MountingHole' + Local override; warning + @(85.1916 mm, 45.3231 mm): Footprint MH1 + +** Found 0 unconnected pads ** + +** Found 0 Footprint errors ** + +** Ignored checks ** + - Footprint has no courtyard defined + - Track endpoint not centered on via + - Tuning profile track geometries + - Footprint doesn't match symbol's footprint filters + - Footprint component type doesn't match footprint pads + +** End of Report ** diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-BOM-jlc.csv b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-BOM-jlc.csv new file mode 100644 index 0000000..512e84e --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-BOM-jlc.csv @@ -0,0 +1,78 @@ +Comment,Designator,Footprint,LCSC Part # +10k,"R2,Rigb,R5,Rled,R41,Rtp,R6,Rrp,R7,R8",R_0603_1608Metric, +MODO-B-UPLINK (DNP — harness alt),P13,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical, +SS34,"Dbk,D2,Dbk2",D_SMA, +FAN,P6,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical, +20k,Ren2,R_0603_1608Metric, +LED,"DB2,DB1,DB3,DB4,D1,D4G",LED_0805_2012Metric, +BATT-1S4P+NTC,P4,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical, +RESET-EXT,P10,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical, +2.2nF,"Ccomp,Ccomp2",C_0603_1608Metric, +MP1584EN,"U7,U2",SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm, +Blackpill-L,J1,PinSocket_1x20_P2.54mm_Vertical, +CUTOFF-SW,P11,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical, +AO3401A,Q1,SOT-23, +100R,"Rg,Rig",R_0603_1608Metric, +AO4406A,Q7,SOIC-8_3.9x4.9mm_P1.27mm, +10uF,"C34,C30",C_0805_2012Metric, +4.7k,"R31,R30",R_0603_1608Metric, +100k,"Rfreq2,R20,Rgs,R56,R58,Rfreq,Ren1,R57",R_0603_1608Metric, +1k,"Rmled,R3,Rts,R1,R40",R_0603_1608Metric, +SHT40-AD1B,U3,Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad, +22uF,"C40,C35,C41",C_0805_2012Metric, +XBEE-ROW-1 (VCC/DOUT/DIN),J7,PinSocket_1x10_P2.00mm_Vertical, +8mR/1%,RS1,R_1206_3216Metric, +100nF,"Cu3,C7,C9,C11,C5,C24,Cu4",C_0603_1608Metric, +100k/1%,"R60,R52,R54",R_0603_1608Metric, +22k,Rdfu,R_0603_1608Metric, +MountingHole_3.2mm,"MH3,MH4,MH2,MH1",MountingHole_3.2mm, +SMBJ33A,D10,D_SMB, +40.2k,"Rcomp,Rcomp2",R_0603_1608Metric, +MMBT3904,"Q5,Q6",SOT-23, +5V-IN-SD15B05,P2,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical, +10nF,"Cbst2,Cbst",C_0603_1608Metric, +AO3400A,"Q2,Q4",SOT-23, +USART1-RSV (DNP),H3,PinHeader_1x03_P2.54mm_Vertical, +2.2uH/8A,L6,L_Bourns-SRU8028_8.0x8.0mm, +TMP102,U4,SOT-563, +330R,"RB3,RB4,RB2,RB1",R_0603_1608Metric, +CLPROG,TP1,TestPoint_Pad_D1.5mm, +10uH,L2,L_Bourns-SRU8028_8.0x8.0mm, +RESET,SW4G,SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS, +XBEE-ROW-2,J8,PinSocket_1x10_P2.00mm_Vertical, +22uF/50V,C22,C_1210_3225Metric, +31.6k/1%,R61,R_0603_1608Metric, +5.1k,"Rcc1,Rcc2",R_0603_1608Metric, +TEMP_PROBE,P5,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical, +10k/1%,"R55,R42",R_0603_1608Metric, +F0:1,JP4,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm, +PANEL_LED,P8,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical, +0R,JP1,SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm, +NTC-HOTSPOT,P12,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical, +47uF,"C32,C33",C_1210_3225Metric, +USB-C,J9,USB_C_Receptacle_GCT_USB4085, +GX16-5,P1,"TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal", +PPTC 3A,F1,Fuse_1812_4532Metric, +G5V-1 DC5,K1,Relay_SPDT_Omron_G5V-1, +Blackpill-R,J2,PinSocket_1x20_P2.54mm_Vertical, +100uF/6.3V,C43,CP_Elec_6.3x7.7, +BZX84C15,DzG,SOT-23, +LTC4040EUFD,U6,QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm, +F1:0,JP3,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm, +IRFR5305,Q10,TO-252-2, +499k/1%,R53,R_0603_1608Metric, +287k/1%,R51,R_0603_1608Metric, +47uF/50V,C10,CP_Elec_6.3x7.7, +RESET,SW1,SW_PUSH_6mm, +2.2uF,C31,C_0603_1608Metric, +19.1k,R21,R_0603_1608Metric, +47uF,C3,CP_Elec_6.3x7.7, +BAT54,D5,D_SOD-123, +RTK2B-UART1 (DNP — harness alt),P3,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical, +825R/1%,R50,R_0603_1608Metric, +PFO,TP2,TestPoint_Pad_D1.5mm, +22uF/16V,C23,C_0805_2012Metric, +F2:Li-ion,JP2,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm, +1N4148W,D6,D_SOD-123, +10uH/2A,L7,L_Bourns-SRU8028_8.0x8.0mm, +simpleRTK2B-Pro on UNO female headers,MOD1,Arduino_UNO_R3, diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-CPL-jlc.csv b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-CPL-jlc.csv new file mode 100644 index 0000000..c96a451 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-CPL-jlc.csv @@ -0,0 +1,133 @@ +Designator,Mid X,Mid Y,Layer,Rotation +MOD1,115.251650mm,-129.583100mm,Bottom,0.000000 +C3,154.691650mm,-48.523100mm,Top,90.000000 +C5,92.191650mm,-116.323100mm,Top,0.000000 +C7,96.191650mm,-116.323100mm,Top,0.000000 +C9,101.591650mm,-83.323100mm,Top,0.000000 +C10,89.691650mm,-71.823100mm,Top,0.000000 +C11,162.191650mm,-51.223100mm,Top,0.000000 +C22,161.691650mm,-45.298100mm,Top,90.000000 +C23,179.741650mm,-51.223100mm,Top,0.000000 +C24,118.916650mm,-112.323100mm,Top,0.000000 +C30,100.191650mm,-98.323100mm,Top,0.000000 +C31,112.416650mm,-97.323100mm,Top,0.000000 +C32,120.666650mm,-104.323100mm,Top,0.000000 +C33,126.166650mm,-104.323100mm,Top,0.000000 +C34,130.991650mm,-104.323100mm,Top,0.000000 +C35,130.191650mm,-96.323100mm,Top,0.000000 +C40,179.691650mm,-96.323100mm,Top,-90.000000 +C41,198.691650mm,-103.273100mm,Top,-90.000000 +C43,185.191650mm,-122.323100mm,Top,0.000000 +Cbst,168.416650mm,-45.323100mm,Top,0.000000 +Cbst2,187.916650mm,-109.823100mm,Top,0.000000 +Ccomp,175.841650mm,-53.473100mm,Top,-90.000000 +Ccomp2,187.966650mm,-114.823100mm,Top,0.000000 +Cu3,132.916650mm,-112.323100mm,Top,0.000000 +Cu4,136.916650mm,-112.323100mm,Top,0.000000 +D1,100.191650mm,-116.323100mm,Top,0.000000 +D2,94.191650mm,-98.323100mm,Top,0.000000 +D4G,203.100000mm,-92.100000mm,Top,0.000000 +D5,95.191650mm,-83.323100mm,Top,0.000000 +D6,199.691650mm,-61.823100mm,Top,180.000000 +D10,91.191650mm,-61.823100mm,Top,0.000000 +DB1,194.254150mm,-44.323100mm,Top,0.000000 +DB2,198.254150mm,-44.323100mm,Top,0.000000 +DB3,202.254150mm,-44.323100mm,Top,0.000000 +DB4,206.254150mm,-44.323100mm,Top,0.000000 +Dbk,168.191650mm,-65.823100mm,Top,-90.000000 +Dbk2,188.491650mm,-103.823100mm,Top,0.000000 +DzG,99.191650mm,-61.323100mm,Top,0.000000 +F1,147.191650mm,-46.323100mm,Top,0.000000 +H3,111.191650mm,-46.323100mm,Top,0.000000 +J1,107.191650mm,-56.323100mm,Top,90.000000 +J2,107.191650mm,-74.103100mm,Top,90.000000 +J7,174.191650mm,-74.823100mm,Top,0.000000 +J8,196.541650mm,-74.823100mm,Top,0.000000 +J9,161.175000mm,-129.425000mm,Top,0.000000 +JP1,165.541650mm,-80.323100mm,Top,0.000000 +JP2,141.391650mm,-90.323100mm,Top,0.000000 +JP3,141.391650mm,-94.823100mm,Top,0.000000 +JP4,141.391650mm,-99.823100mm,Top,0.000000 +K1,189.284150mm,-55.865600mm,Top,0.000000 +L2,187.291650mm,-47.823100mm,Top,0.000000 +L6,167.691650mm,-104.823100mm,Top,0.000000 +L7,167.691650mm,-118.323100mm,Top,0.000000 +MH1,85.191650mm,-45.323100mm,Top,180.000000 +MH2,211.191650mm,-45.323100mm,Top,0.000000 +MH3,85.191650mm,-135.323100mm,Top,0.000000 +MH4,211.191650mm,-135.323100mm,Top,0.000000 +P1,172.691650mm,-133.823100mm,Top,0.000000 +P2,127.191650mm,-46.323100mm,Top,0.000000 +P3,210.191650mm,-95.323100mm,Top,90.000000 +P4,210.191650mm,-108.323100mm,Top,90.000000 +P5,98.191650mm,-46.323100mm,Top,0.000000 +P6,210.191650mm,-61.823100mm,Top,90.000000 +P8,210.166650mm,-70.823100mm,Top,90.000000 +P10,210.166650mm,-80.073100mm,Top,90.000000 +P11,135.791650mm,-46.323100mm,Top,0.000000 +P12,210.191650mm,-121.323100mm,Top,90.000000 +P13,116.191650mm,-46.323100mm,Top,0.000000 +Q1,138.650000mm,-60.900000mm,Top,0.000000 +Q2,106.191650mm,-96.323100mm,Top,0.000000 +Q4,92.754150mm,-105.823100mm,Top,0.000000 +Q5,145.450000mm,-60.200000mm,Top,0.000000 +Q6,183.191650mm,-63.323100mm,Top,0.000000 +Q7,112.716650mm,-87.228100mm,Top,0.000000 +Q10,90.191650mm,-54.323100mm,Top,0.000000 +R1,163.866650mm,-59.323100mm,Top,0.000000 +R2,167.366650mm,-59.323100mm,Top,0.000000 +R3,97.866650mm,-107.323100mm,Top,0.000000 +R5,92.241650mm,-112.323100mm,Top,0.000000 +R6,98.741650mm,-112.323100mm,Top,0.000000 +R7,102.916650mm,-112.323100mm,Top,0.000000 +R8,106.916650mm,-112.323100mm,Top,0.000000 +R20,173.866650mm,-45.323100mm,Top,0.000000 +R21,177.091650mm,-45.323100mm,Top,0.000000 +R30,124.916650mm,-112.323100mm,Top,0.000000 +R31,128.916650mm,-112.323100mm,Top,0.000000 +R40,178.366650mm,-69.323100mm,Top,-90.000000 +R41,178.191650mm,-64.823100mm,Top,0.000000 +R42,114.916650mm,-112.323100mm,Top,0.000000 +R50,112.366650mm,-102.323100mm,Top,0.000000 +R51,104.866650mm,-102.323100mm,Top,0.000000 +R52,108.366650mm,-102.323100mm,Top,0.000000 +R53,134.866650mm,-91.323100mm,Top,0.000000 +R54,134.866650mm,-95.323100mm,Top,0.000000 +R55,101.866650mm,-107.323100mm,Top,0.000000 +R56,105.866650mm,-107.323100mm,Top,0.000000 +R57,134.866650mm,-99.823100mm,Top,0.000000 +R58,134.991650mm,-104.323100mm,Top,0.000000 +R60,179.516650mm,-102.323100mm,Top,0.000000 +R61,179.516650mm,-107.323100mm,Top,0.000000 +RB1,194.254150mm,-48.323100mm,Top,0.000000 +RB2,198.254150mm,-48.323100mm,Top,0.000000 +RB3,202.254150mm,-48.323100mm,Top,0.000000 +RB4,206.254150mm,-48.323100mm,Top,0.000000 +RS1,100.191650mm,-88.323100mm,Top,0.000000 +Rcc1,161.425000mm,-124.750000mm,Top,90.000000 +Rcc2,165.400000mm,-124.750000mm,Top,90.000000 +Rcomp,175.841650mm,-48.623100mm,Top,-90.000000 +Rcomp2,179.691650mm,-116.323100mm,Top,0.000000 +Rdfu,110.916650mm,-112.323100mm,Top,0.000000 +Ren1,174.191650mm,-59.323100mm,Top,0.000000 +Ren2,178.191650mm,-59.323100mm,Top,0.000000 +Rfreq,161.135950mm,-55.555200mm,Top,90.000000 +Rfreq2,179.516650mm,-111.823100mm,Top,0.000000 +Rg,94.191650mm,-94.323100mm,Top,0.000000 +Rgs,99.191650mm,-94.323100mm,Top,0.000000 +Rig,101.366650mm,-69.323100mm,Top,180.000000 +Rigb,101.366650mm,-74.323100mm,Top,180.000000 +Rled,95.416650mm,-112.323100mm,Top,0.000000 +Rmled,203.050000mm,-84.450000mm,Top,0.000000 +Rrp,85.191650mm,-61.323100mm,Top,0.000000 +Rtp,100.866650mm,-102.323100mm,Top,0.000000 +Rts,96.866650mm,-102.323100mm,Top,0.000000 +SW1,199.191650mm,-133.323100mm,Top,0.000000 +SW4G,148.175000mm,-135.600000mm,Top,0.000000 +TP1,113.191650mm,-107.323100mm,Top,0.000000 +TP2,127.691650mm,-87.323100mm,Top,0.000000 +U2,169.216650mm,-52.728100mm,Top,180.000000 +U3,124.191650mm,-118.323100mm,Top,0.000000 +U4,130.311650mm,-117.673100mm,Top,0.000000 +U6,121.741650mm,-94.323100mm,Top,0.000000 +U7,197.621650mm,-112.573100mm,Top,180.000000 diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-bom-raw.csv b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-bom-raw.csv new file mode 100644 index 0000000..4892e2d --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-bom-raw.csv @@ -0,0 +1,78 @@ +value,footprint,quantity,references +10k,Resistor_SMD:R_0603_1608Metric,10,"['R2', 'Rigb', 'R5', 'Rled', 'R41', 'Rtp', 'R6', 'Rrp', 'R7', 'R8']" +MODO-B-UPLINK (DNP — harness alt),Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,['P13'] +SS34,Diode_SMD:D_SMA,3,"['Dbk', 'D2', 'Dbk2']" +FAN,Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,['P6'] +20k,Resistor_SMD:R_0603_1608Metric,1,['Ren2'] +LED,LED_SMD:LED_0805_2012Metric,6,"['DB2', 'DB1', 'DB3', 'DB4', 'D1', 'D4G']" +BATT-1S4P+NTC,Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,['P4'] +RESET-EXT,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P10'] +2.2nF,Capacitor_SMD:C_0603_1608Metric,2,"['Ccomp', 'Ccomp2']" +MP1584EN,Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm,2,"['U7', 'U2']" +Blackpill-L,Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical,1,['J1'] +CUTOFF-SW,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P11'] +AO3401A,Package_TO_SOT_SMD:SOT-23,1,['Q1'] +100R,Resistor_SMD:R_0603_1608Metric,2,"['Rg', 'Rig']" +AO4406A,Package_SO:SOIC-8_3.9x4.9mm_P1.27mm,1,['Q7'] +10uF,Capacitor_SMD:C_0805_2012Metric,2,"['C34', 'C30']" +4.7k,Resistor_SMD:R_0603_1608Metric,2,"['R31', 'R30']" +100k,Resistor_SMD:R_0603_1608Metric,8,"['Rfreq2', 'R20', 'Rgs', 'R56', 'R58', 'Rfreq', 'Ren1', 'R57']" +1k,Resistor_SMD:R_0603_1608Metric,5,"['Rmled', 'R3', 'Rts', 'R1', 'R40']" +SHT40-AD1B,Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad,1,['U3'] +22uF,Capacitor_SMD:C_0805_2012Metric,3,"['C40', 'C35', 'C41']" +XBEE-ROW-1 (VCC/DOUT/DIN),Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical,1,['J7'] +8mR/1%,Resistor_SMD:R_1206_3216Metric,1,['RS1'] +100nF,Capacitor_SMD:C_0603_1608Metric,7,"['Cu3', 'C7', 'C9', 'C11', 'C5', 'C24', 'Cu4']" +100k/1%,Resistor_SMD:R_0603_1608Metric,3,"['R60', 'R52', 'R54']" +22k,Resistor_SMD:R_0603_1608Metric,1,['Rdfu'] +MountingHole_3.2mm,MountingHole:MountingHole_3.2mm,4,"['MH3', 'MH4', 'MH2', 'MH1']" +SMBJ33A,Diode_SMD:D_SMB,1,['D10'] +40.2k,Resistor_SMD:R_0603_1608Metric,2,"['Rcomp', 'Rcomp2']" +MMBT3904,Package_TO_SOT_SMD:SOT-23,2,"['Q5', 'Q6']" +5V-IN-SD15B05,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P2'] +10nF,Capacitor_SMD:C_0603_1608Metric,2,"['Cbst2', 'Cbst']" +AO3400A,Package_TO_SOT_SMD:SOT-23,2,"['Q2', 'Q4']" +USART1-RSV (DNP),Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical,1,['H3'] +2.2uH/8A,Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm,1,['L6'] +TMP102,Package_TO_SOT_SMD:SOT-563,1,['U4'] +330R,Resistor_SMD:R_0603_1608Metric,4,"['RB3', 'RB4', 'RB2', 'RB1']" +CLPROG,TestPoint:TestPoint_Pad_D1.5mm,1,['TP1'] +10uH,Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm,1,['L2'] +RESET,Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS,1,['SW4G'] +XBEE-ROW-2,Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical,1,['J8'] +22uF/50V,Capacitor_SMD:C_1210_3225Metric,1,['C22'] +31.6k/1%,Resistor_SMD:R_0603_1608Metric,1,['R61'] +5.1k,Resistor_SMD:R_0603_1608Metric,2,"['Rcc1', 'Rcc2']" +TEMP_PROBE,Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,['P5'] +10k/1%,Resistor_SMD:R_0603_1608Metric,2,"['R55', 'R42']" +F0:1,Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,['JP4'] +PANEL_LED,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P8'] +0R,Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm,1,['JP1'] +NTC-HOTSPOT,Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,['P12'] +47uF,Capacitor_SMD:C_1210_3225Metric,2,"['C32', 'C33']" +USB-C,Connector_USB:USB_C_Receptacle_GCT_USB4085,1,['J9'] +GX16-5,"TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal",1,['P1'] +PPTC 3A,Fuse:Fuse_1812_4532Metric,1,['F1'] +G5V-1 DC5,Relay_THT:Relay_SPDT_Omron_G5V-1,1,['K1'] +Blackpill-R,Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical,1,['J2'] +100uF/6.3V,Capacitor_SMD:CP_Elec_6.3x7.7,1,['C43'] +BZX84C15,Package_TO_SOT_SMD:SOT-23,1,['DzG'] +LTC4040EUFD,Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm,1,['U6'] +F1:0,Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,['JP3'] +IRFR5305,Package_TO_SOT_SMD:TO-252-2,1,['Q10'] +499k/1%,Resistor_SMD:R_0603_1608Metric,1,['R53'] +287k/1%,Resistor_SMD:R_0603_1608Metric,1,['R51'] +47uF/50V,Capacitor_SMD:CP_Elec_6.3x7.7,1,['C10'] +RESET,Button_Switch_THT:SW_PUSH_6mm,1,['SW1'] +2.2uF,Capacitor_SMD:C_0603_1608Metric,1,['C31'] +19.1k,Resistor_SMD:R_0603_1608Metric,1,['R21'] +47uF,Capacitor_SMD:CP_Elec_6.3x7.7,1,['C3'] +BAT54,Diode_SMD:D_SOD-123,1,['D5'] +RTK2B-UART1 (DNP — harness alt),Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,['P3'] +825R/1%,Resistor_SMD:R_0603_1608Metric,1,['R50'] +PFO,TestPoint:TestPoint_Pad_D1.5mm,1,['TP2'] +22uF/16V,Capacitor_SMD:C_0805_2012Metric,1,['C23'] +F2:Li-ion,Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,['JP2'] +1N4148W,Diode_SMD:D_SOD-123,1,['D6'] +10uH/2A,Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm,1,['L7'] +simpleRTK2B-Pro on UNO female headers,Module:Arduino_UNO_R3,1,['MOD1'] diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-cpl-raw.csv b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-cpl-raw.csv new file mode 100644 index 0000000..46fed53 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-cpl-raw.csv @@ -0,0 +1,133 @@ +Ref,Val,Package,PosX,PosY,Rot,Side +"MOD1","simpleRTK2B-Pro on UNO female headers","Arduino_UNO_R3",115.251650,-129.583100,0.000000,bottom +"C3","47uF","CP_Elec_6.3x7.7",154.691650,-48.523100,90.000000,top +"C5","100nF","C_0603_1608Metric",92.191650,-116.323100,0.000000,top +"C7","100nF","C_0603_1608Metric",96.191650,-116.323100,0.000000,top +"C9","100nF","C_0603_1608Metric",101.591650,-83.323100,0.000000,top +"C10","47uF/50V","CP_Elec_6.3x7.7",89.691650,-71.823100,0.000000,top +"C11","100nF","C_0603_1608Metric",162.191650,-51.223100,0.000000,top +"C22","22uF/50V","C_1210_3225Metric",161.691650,-45.298100,90.000000,top +"C23","22uF/16V","C_0805_2012Metric",179.741650,-51.223100,0.000000,top +"C24","100nF","C_0603_1608Metric",118.916650,-112.323100,0.000000,top +"C30","10uF","C_0805_2012Metric",100.191650,-98.323100,0.000000,top +"C31","2.2uF","C_0603_1608Metric",112.416650,-97.323100,0.000000,top +"C32","47uF","C_1210_3225Metric",120.666650,-104.323100,0.000000,top +"C33","47uF","C_1210_3225Metric",126.166650,-104.323100,0.000000,top +"C34","10uF","C_0805_2012Metric",130.991650,-104.323100,0.000000,top +"C35","22uF","C_0805_2012Metric",130.191650,-96.323100,0.000000,top +"C40","22uF","C_0805_2012Metric",179.691650,-96.323100,-90.000000,top +"C41","22uF","C_0805_2012Metric",198.691650,-103.273100,-90.000000,top +"C43","100uF/6.3V","CP_Elec_6.3x7.7",185.191650,-122.323100,0.000000,top +"Cbst","10nF","C_0603_1608Metric",168.416650,-45.323100,0.000000,top +"Cbst2","10nF","C_0603_1608Metric",187.916650,-109.823100,0.000000,top +"Ccomp","2.2nF","C_0603_1608Metric",175.841650,-53.473100,-90.000000,top +"Ccomp2","2.2nF","C_0603_1608Metric",187.966650,-114.823100,0.000000,top +"Cu3","100nF","C_0603_1608Metric",132.916650,-112.323100,0.000000,top +"Cu4","100nF","C_0603_1608Metric",136.916650,-112.323100,0.000000,top +"D1","LED","LED_0805_2012Metric",100.191650,-116.323100,0.000000,top +"D2","SS34","D_SMA",94.191650,-98.323100,0.000000,top +"D4G","LED","LED_0805_2012Metric",203.100000,-92.100000,0.000000,top +"D5","BAT54","D_SOD-123",95.191650,-83.323100,0.000000,top +"D6","1N4148W","D_SOD-123",199.691650,-61.823100,180.000000,top +"D10","SMBJ33A","D_SMB",91.191650,-61.823100,0.000000,top +"DB1","LED","LED_0805_2012Metric",194.254150,-44.323100,0.000000,top +"DB2","LED","LED_0805_2012Metric",198.254150,-44.323100,0.000000,top +"DB3","LED","LED_0805_2012Metric",202.254150,-44.323100,0.000000,top +"DB4","LED","LED_0805_2012Metric",206.254150,-44.323100,0.000000,top +"Dbk","SS34","D_SMA",168.191650,-65.823100,-90.000000,top +"Dbk2","SS34","D_SMA",188.491650,-103.823100,0.000000,top +"DzG","BZX84C15","SOT-23",99.191650,-61.323100,0.000000,top +"F1","PPTC 3A","Fuse_1812_4532Metric",147.191650,-46.323100,0.000000,top +"H3","USART1-RSV (DNP)","PinHeader_1x03_P2.54mm_Vertical",111.191650,-46.323100,0.000000,top +"J1","Blackpill-L","PinSocket_1x20_P2.54mm_Vertical",107.191650,-56.323100,90.000000,top +"J2","Blackpill-R","PinSocket_1x20_P2.54mm_Vertical",107.191650,-74.103100,90.000000,top +"J7","XBEE-ROW-1 (VCC/DOUT/DIN)","PinSocket_1x10_P2.00mm_Vertical",174.191650,-74.823100,0.000000,top +"J8","XBEE-ROW-2","PinSocket_1x10_P2.00mm_Vertical",196.541650,-74.823100,0.000000,top +"J9","USB-C","USB_C_Receptacle_GCT_USB4085",161.175000,-129.425000,0.000000,top +"JP1","0R","SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm",165.541650,-80.323100,0.000000,top +"JP2","F2:Li-ion","SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm",141.391650,-90.323100,0.000000,top +"JP3","F1:0","SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm",141.391650,-94.823100,0.000000,top +"JP4","F0:1","SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm",141.391650,-99.823100,0.000000,top +"K1","G5V-1 DC5","Relay_SPDT_Omron_G5V-1",189.284150,-55.865600,0.000000,top +"L2","10uH","L_Bourns-SRU8028_8.0x8.0mm",187.291650,-47.823100,0.000000,top +"L6","2.2uH/8A","L_Bourns-SRU8028_8.0x8.0mm",167.691650,-104.823100,0.000000,top +"L7","10uH/2A","L_Bourns-SRU8028_8.0x8.0mm",167.691650,-118.323100,0.000000,top +"MH1","MH1_3.2mm","MountingHole_3.2mm",85.191650,-45.323100,180.000000,top +"MH2","MountingHole_3.2mm","MountingHole_3.2mm",211.191650,-45.323100,0.000000,top +"MH3","MountingHole_3.2mm","MountingHole_3.2mm",85.191650,-135.323100,0.000000,top +"MH4","MountingHole_3.2mm","MountingHole_3.2mm",211.191650,-135.323100,0.000000,top +"P1","GX16-5","TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal",172.691650,-133.823100,0.000000,top +"P2","5V-IN-SD15B05","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",127.191650,-46.323100,0.000000,top +"P3","RTK2B-UART1 (DNP — harness alt)","JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical",210.191650,-95.323100,90.000000,top +"P4","BATT-1S4P+NTC","JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical",210.191650,-108.323100,90.000000,top +"P5","TEMP_PROBE","JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical",98.191650,-46.323100,0.000000,top +"P6","FAN","JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical",210.191650,-61.823100,90.000000,top +"P8","PANEL_LED","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",210.166650,-70.823100,90.000000,top +"P10","RESET-EXT","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",210.166650,-80.073100,90.000000,top +"P11","CUTOFF-SW","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",135.791650,-46.323100,0.000000,top +"P12","NTC-HOTSPOT","JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical",210.191650,-121.323100,90.000000,top +"P13","MODO-B-UPLINK (DNP — harness alt)","JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical",116.191650,-46.323100,0.000000,top +"Q1","AO3401A","SOT-23",138.650000,-60.900000,0.000000,top +"Q2","AO3400A","SOT-23",106.191650,-96.323100,0.000000,top +"Q4","AO3400A","SOT-23",92.754150,-105.823100,0.000000,top +"Q5","MMBT3904","SOT-23",145.450000,-60.200000,0.000000,top +"Q6","MMBT3904","SOT-23",183.191650,-63.323100,0.000000,top +"Q7","AO4406A","SOIC-8_3.9x4.9mm_P1.27mm",112.716650,-87.228100,0.000000,top +"Q10","IRFR5305","TO-252-2",90.191650,-54.323100,0.000000,top +"R1","1k","R_0603_1608Metric",163.866650,-59.323100,0.000000,top +"R2","10k","R_0603_1608Metric",167.366650,-59.323100,0.000000,top +"R3","1k","R_0603_1608Metric",97.866650,-107.323100,0.000000,top +"R5","10k","R_0603_1608Metric",92.241650,-112.323100,0.000000,top +"R6","10k","R_0603_1608Metric",98.741650,-112.323100,0.000000,top +"R7","10k","R_0603_1608Metric",102.916650,-112.323100,0.000000,top +"R8","10k","R_0603_1608Metric",106.916650,-112.323100,0.000000,top +"R20","100k","R_0603_1608Metric",173.866650,-45.323100,0.000000,top +"R21","19.1k","R_0603_1608Metric",177.091650,-45.323100,0.000000,top +"R30","4.7k","R_0603_1608Metric",124.916650,-112.323100,0.000000,top +"R31","4.7k","R_0603_1608Metric",128.916650,-112.323100,0.000000,top +"R40","1k","R_0603_1608Metric",178.366650,-69.323100,-90.000000,top +"R41","10k","R_0603_1608Metric",178.191650,-64.823100,0.000000,top +"R42","10k/1%","R_0603_1608Metric",114.916650,-112.323100,0.000000,top +"R50","825R/1%","R_0603_1608Metric",112.366650,-102.323100,0.000000,top +"R51","287k/1%","R_0603_1608Metric",104.866650,-102.323100,0.000000,top +"R52","100k/1%","R_0603_1608Metric",108.366650,-102.323100,0.000000,top +"R53","499k/1%","R_0603_1608Metric",134.866650,-91.323100,0.000000,top +"R54","100k/1%","R_0603_1608Metric",134.866650,-95.323100,0.000000,top +"R55","10k/1%","R_0603_1608Metric",101.866650,-107.323100,0.000000,top +"R56","100k","R_0603_1608Metric",105.866650,-107.323100,0.000000,top +"R57","100k","R_0603_1608Metric",134.866650,-99.823100,0.000000,top +"R58","100k","R_0603_1608Metric",134.991650,-104.323100,0.000000,top +"R60","100k/1%","R_0603_1608Metric",179.516650,-102.323100,0.000000,top +"R61","31.6k/1%","R_0603_1608Metric",179.516650,-107.323100,0.000000,top +"RB1","330R","R_0603_1608Metric",194.254150,-48.323100,0.000000,top +"RB2","330R","R_0603_1608Metric",198.254150,-48.323100,0.000000,top +"RB3","330R","R_0603_1608Metric",202.254150,-48.323100,0.000000,top +"RB4","330R","R_0603_1608Metric",206.254150,-48.323100,0.000000,top +"RS1","8mR/1%","R_1206_3216Metric",100.191650,-88.323100,0.000000,top +"Rcc1","5.1k","R_0603_1608Metric",161.425000,-124.750000,90.000000,top +"Rcc2","5.1k","R_0603_1608Metric",165.400000,-124.750000,90.000000,top +"Rcomp","40.2k","R_0603_1608Metric",175.841650,-48.623100,-90.000000,top +"Rcomp2","40.2k","R_0603_1608Metric",179.691650,-116.323100,0.000000,top +"Rdfu","22k","R_0603_1608Metric",110.916650,-112.323100,0.000000,top +"Ren1","100k","R_0603_1608Metric",174.191650,-59.323100,0.000000,top +"Ren2","20k","R_0603_1608Metric",178.191650,-59.323100,0.000000,top +"Rfreq","100k","R_0603_1608Metric",161.135950,-55.555200,90.000000,top +"Rfreq2","100k","R_0603_1608Metric",179.516650,-111.823100,0.000000,top +"Rg","100R","R_0603_1608Metric",94.191650,-94.323100,0.000000,top +"Rgs","100k","R_0603_1608Metric",99.191650,-94.323100,0.000000,top +"Rig","100R","R_0603_1608Metric",101.366650,-69.323100,180.000000,top +"Rigb","10k","R_0603_1608Metric",101.366650,-74.323100,180.000000,top +"Rled","10k","R_0603_1608Metric",95.416650,-112.323100,0.000000,top +"Rmled","1k","R_0603_1608Metric",203.050000,-84.450000,0.000000,top +"Rrp","10k","R_0603_1608Metric",85.191650,-61.323100,0.000000,top +"Rtp","10k","R_0603_1608Metric",100.866650,-102.323100,0.000000,top +"Rts","1k","R_0603_1608Metric",96.866650,-102.323100,0.000000,top +"SW1","RESET","SW_PUSH_6mm",199.191650,-133.323100,0.000000,top +"SW4G","RESET","SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS",148.175000,-135.600000,0.000000,top +"TP1","CLPROG","TestPoint_Pad_D1.5mm",113.191650,-107.323100,0.000000,top +"TP2","PFO","TestPoint_Pad_D1.5mm",127.691650,-87.323100,0.000000,top +"U2","MP1584EN","SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm",169.216650,-52.728100,180.000000,top +"U3","SHT40-AD1B","Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad",124.191650,-118.323100,0.000000,top +"U4","TMP102","SOT-563",130.311650,-117.673100,0.000000,top +"U6","LTC4040EUFD","QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm",121.741650,-94.323100,0.000000,top +"U7","MP1584EN","SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm",197.621650,-112.573100,180.000000,top diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Cu.gbl b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Cu.gbl new file mode 100644 index 0000000..9a40408 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Cu.gbl @@ -0,0 +1,16557 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L4,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%TA.AperFunction,ComponentPad*% +%ADD10RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD11O,1.700000X1.950000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD12RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD13O,1.950000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD14RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD15RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD16O,2.000000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD17R,1.700000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD18C,1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD19RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD20O,1.700000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD21R,1.350000X1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD22C,1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD23RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD24C,0.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD25O,0.900000X2.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD26O,0.900000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD27RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD28C,2.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD29R,2.000000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD30C,2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD31R,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD32O,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD33C,0.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD34C,0.800000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD35C,1.500000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD36C,0.200000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD37C,1.000000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD38C,0.750000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD39C,0.500000*% +%TD*% +G04 APERTURE END LIST* +D10* +%TO.P,P13,1,Pin_1_1*% +%TO.N,USART1_RX*% +X116191650Y-46323100D03* +D11* +%TO.P,P13,2,Pin_2_2*% +%TO.N,/DIN_4G*% +X118691650Y-46323100D03* +%TO.P,P13,3,Pin_3_3*% +%TO.N,GND*% +X121191650Y-46323100D03* +%TD*% +D12* +%TO.P,P6,1,Pin_1_1*% +%TO.N,/5V_FAN*% +X210191650Y-61823100D03* +D13* +%TO.P,P6,2,Pin_2_2*% +%TO.N,/FAN_RET*% +X210191650Y-59323100D03* +%TO.P,P6,3,Pin_3_3*% +%TO.N,GND*% +X210191650Y-56823100D03* +%TO.P,P6,4,Pin_4_4*% +%TO.N,FAN_TACH_RAW*% +X210191650Y-54323100D03* +%TD*% +D14* +%TO.P,P4,1,Pin_1_1*% +%TO.N,/BAT_PLUS*% +X210191650Y-108323100D03* +D13* +%TO.P,P4,2,Pin_2_2*% +%TO.N,GND*% +X210191650Y-105823100D03* +%TO.P,P4,3,Pin_3_3*% +%TO.N,/NTC*% +X210191650Y-103323100D03* +%TD*% +D15* +%TO.P,P10,1,Pin_1_1*% +%TO.N,/NRST*% +X210166650Y-80073100D03* +D16* +%TO.P,P10,2,Pin_2_2*% +%TO.N,GND*% +X210166650Y-77573100D03* +%TD*% +D17* +%TO.P,J1,1,Pin_1_1*% +%TO.N,unconnected-(J1-Pin_1-Pad1)*% +X107191650Y-56323100D03* +D18* +%TO.P,J1,2,Pin_2_2*% +%TO.N,unconnected-(J1-Pin_2-Pad2)*% +X109731650Y-56323100D03* +%TO.P,J1,3,Pin_3_3*% +%TO.N,unconnected-(J1-Pin_3-Pad3)*% +X112271650Y-56323100D03* +%TO.P,J1,4,Pin_4_4*% +%TO.N,unconnected-(J1-Pin_4-Pad4)*% +X114811650Y-56323100D03* +%TO.P,J1,5,Pin_5_5*% +%TO.N,/NRST*% +X117351650Y-56323100D03* +%TO.P,J1,6,Pin_6_6*% +%TO.N,/BAT_SENSE*% +X119891650Y-56323100D03* +%TO.P,J1,7,Pin_7_7*% +%TO.N,/PWR_CTRL*% +X122431650Y-56323100D03* +%TO.P,J1,8,Pin_8_8*% +%TO.N,/GNSS_TX*% +X124971650Y-56323100D03* +%TO.P,J1,9,Pin_9_9*% +%TO.N,/GNSS_RX*% +X127511650Y-56323100D03* +%TO.P,J1,10,Pin_10_10*% +%TO.N,/5V_SENSE*% +X130051650Y-56323100D03* +%TO.P,J1,11,Pin_11_11*% +%TO.N,IGN_SENSE*% +X132591650Y-56323100D03* +%TO.P,J1,12,Pin_12_12*% +%TO.N,FAN_PWM*% +X135131650Y-56323100D03* +%TO.P,J1,13,Pin_13_13*% +%TO.N,unconnected-(J1-Pin_13-Pad13)*% +X137671650Y-56323100D03* +%TO.P,J1,14,Pin_14_14*% +%TO.N,EXT_LED*% +X140211650Y-56323100D03* +%TO.P,J1,15,Pin_15_15*% +%TO.N,/NTC_TEMP*% +X142751650Y-56323100D03* +%TO.P,J1,16,Pin_16_16*% +%TO.N,unconnected-(J1-Pin_16-Pad16)*% +X145291650Y-56323100D03* +%TO.P,J1,17,Pin_17_17*% +%TO.N,FAN_TACH*% +X147831650Y-56323100D03* +%TO.P,J1,18,Pin_18_18*% +%TO.N,3V3*% +X150371650Y-56323100D03* +%TO.P,J1,19,Pin_19_19*% +%TO.N,GND*% +X152911650Y-56323100D03* +%TO.P,J1,20,Pin_20_20*% +%TO.N,/SYS5V*% +X155451650Y-56323100D03* +%TD*% +D19* +%TO.P,P11,1,Pin_1_1*% +%TO.N,/MAIN5V*% +X135791650Y-46323100D03* +D20* +%TO.P,P11,2,Pin_2_2*% +%TO.N,/SYS5V*% +X138291650Y-46323100D03* +%TD*% +D21* +%TO.P,J7,1,Pin_1_1*% +%TO.N,/3V3_MODEM*% +X174191650Y-74823100D03* +D22* +%TO.P,J7,2,Pin_2_2*% +%TO.N,/DOUT_4G*% +X174191650Y-76823100D03* +%TO.P,J7,3,Pin_3_3*% +%TO.N,/DIN_4G*% +X174191650Y-78823100D03* +%TO.P,J7,4,Pin_4_4*% +%TO.N,GND*% +X174191650Y-80823100D03* +%TO.P,J7,5,Pin_5_5*% +%TO.N,/MODEM_RST*% +X174191650Y-82823100D03* +%TO.P,J7,6,Pin_6_6*% +%TO.N,/USB_VBUS*% +X174191650Y-84823100D03* +%TO.P,J7,7,Pin_7_7*% +%TO.N,/USB_DP*% +X174191650Y-86823100D03* +%TO.P,J7,8,Pin_8_8*% +%TO.N,/USB_DM*% +X174191650Y-88823100D03* +%TO.P,J7,9,Pin_9_9*% +%TO.N,unconnected-(J7-Pin_9-Pad9)*% +X174191650Y-90823100D03* +%TO.P,J7,10,Pin_10_10*% +%TO.N,GND*% +X174191650Y-92823100D03* +%TD*% +D19* +%TO.P,P2,1,Pin_1_1*% +%TO.N,/VEH5V*% +X127191650Y-46323100D03* +D20* +%TO.P,P2,2,Pin_2_2*% +%TO.N,GND*% +X129691650Y-46323100D03* +%TD*% +D17* +%TO.P,H3,1,Pin_1_1*% +%TO.N,/USART1_TX*% +X111191650Y-46323100D03* +D18* +%TO.P,H3,2,Pin_2_2*% +%TO.N,USART1_RX*% +X111191650Y-48863100D03* +%TO.P,H3,3,Pin_3_3*% +%TO.N,GND*% +X111191650Y-51403100D03* +%TD*% +D21* +%TO.P,J8,1,Pin_1_1*% +%TO.N,GND*% +X196541650Y-74823100D03* +D22* +%TO.P,J8,2,Pin_2_2*% +%TO.N,unconnected-(J8-Pin_2-Pad2)*% +X196541650Y-76823100D03* +%TO.P,J8,3,Pin_3_3*% +%TO.N,unconnected-(J8-Pin_3-Pad3)*% +X196541650Y-78823100D03* +%TO.P,J8,4,Pin_4_4*% +%TO.N,unconnected-(J8-Pin_4-Pad4)*% +X196541650Y-80823100D03* +%TO.P,J8,5,Pin_5_5*% +%TO.N,unconnected-(J8-Pin_5-Pad5)*% +X196541650Y-82823100D03* +%TO.P,J8,6,Pin_6_6*% +%TO.N,GND*% +X196541650Y-84823100D03* +%TO.P,J8,7,Pin_7_7*% +%TO.N,/3V3_MODEM*% +X196541650Y-86823100D03* +%TO.P,J8,8,Pin_8_8*% +%TO.N,/MODEM_LED*% +X196541650Y-88823100D03* +%TO.P,J8,9,Pin_9_9*% +%TO.N,unconnected-(J8-Pin_9-Pad9)*% +X196541650Y-90823100D03* +%TO.P,J8,10,Pin_10_10*% +%TO.N,GND*% +X196541650Y-92823100D03* +%TD*% +D10* +%TO.P,P5,1,Pin_1_1*% +%TO.N,3V3*% +X98191650Y-46323100D03* +D11* +%TO.P,P5,2,Pin_2_2*% +%TO.N,GND*% +X100691650Y-46323100D03* +%TO.P,P5,3,Pin_3_3*% +%TO.N,/I2C_SDA*% +X103191650Y-46323100D03* +%TO.P,P5,4,Pin_4_4*% +%TO.N,/I2C_SCL*% +X105691650Y-46323100D03* +%TD*% +D15* +%TO.P,P8,1,Pin_1_1*% +%TO.N,/LED_A*% +X210166650Y-70823100D03* +D16* +%TO.P,P8,2,Pin_2_2*% +%TO.N,/LED_K*% +X210166650Y-68323100D03* +%TD*% +D23* +%TO.P,P12,1,Pin_1_1*% +%TO.N,/NTC_TEMP*% +X210191650Y-121323100D03* +D16* +%TO.P,P12,2,Pin_2_2*% +%TO.N,GND*% +X210191650Y-118823100D03* +%TD*% +D24* +%TO.P,J9,A1,GND_A1*% +%TO.N,GND*% +X161175000Y-129425000D03* +%TO.P,J9,A4,VBUS_A4*% +%TO.N,/USB_VBUS*% +X162025000Y-129425000D03* +%TO.P,J9,A5,CC1_A5*% +%TO.N,/USB_CC1*% +X162875000Y-129425000D03* +%TO.P,J9,A6,D+_A6*% +%TO.N,/USB_DP*% +X163725000Y-129425000D03* +%TO.P,J9,A7,D-_A7*% +%TO.N,/USB_DM*% +X164575000Y-129425000D03* +%TO.P,J9,A8*% +%TO.N,N/C*% +X165425000Y-129425000D03* +%TO.P,J9,A9,VBUS_A9*% +%TO.N,/USB_VBUS*% +X166275000Y-129425000D03* +%TO.P,J9,A12,GND_A12*% +%TO.N,GND*% +X167125000Y-129425000D03* +%TO.P,J9,B1,GND_B1*% +X167125000Y-130775000D03* +%TO.P,J9,B4,VBUS_B4*% +%TO.N,/USB_VBUS*% +X166275000Y-130775000D03* +%TO.P,J9,B5,CC2_B5*% +%TO.N,/USB_CC2*% +X165425000Y-130775000D03* +%TO.P,J9,B6,D+_B6*% +%TO.N,/USB_DP*% +X164575000Y-130775000D03* +%TO.P,J9,B7,D-_B7*% +%TO.N,/USB_DM*% +X163725000Y-130775000D03* +%TO.P,J9,B8*% +%TO.N,N/C*% +X162875000Y-130775000D03* +%TO.P,J9,B9,VBUS_B9*% +%TO.N,/USB_VBUS*% +X162025000Y-130775000D03* +%TO.P,J9,B12,GND_B12*% +%TO.N,GND*% +X161175000Y-130775000D03* +D25* +%TO.P,J9,SH,SHIELD_SH*% +X159825000Y-130405000D03* +D26* +X159825000Y-133785000D03* +D25* +X168475000Y-130405000D03* +D26* +X168475000Y-133785000D03* +%TD*% +D27* +%TO.P,P1,1,Pin_1_1*% +%TO.N,/24V_IN*% +X172691650Y-133823100D03* +D28* +%TO.P,P1,2,Pin_2_2*% +%TO.N,GND*% +X177691650Y-133823100D03* +%TO.P,P1,3,Pin_3_3*% +%TO.N,IGN_IN*% +X182691650Y-133823100D03* +%TO.P,P1,4,Pin_4_4*% +%TO.N,unconnected-(P1-Pin_4-Pad4)*% +X187691650Y-133823100D03* +%TO.P,P1,5,Pin_5_5*% +%TO.N,unconnected-(P1-Pin_5-Pad5)*% +X192691650Y-133823100D03* +%TD*% +D29* +%TO.P,K1,1*% +%TO.N,USART1_RX*% +X189284150Y-55865600D03* +D30* +%TO.P,K1,2*% +%TO.N,/SYS5V*% +X189284150Y-58405600D03* +%TO.P,K1,5*% +%TO.N,/DIN_4G*% +X189284150Y-66025600D03* +%TO.P,K1,6*% +X194364150Y-66025600D03* +%TO.P,K1,9*% +%TO.N,/KCOIL*% +X194364150Y-58405600D03* +%TO.P,K1,10*% +%TO.N,/USART1_TX*% +X194364150Y-55865600D03* +%TD*% +D17* +%TO.P,J2,1,Pin_1_1*% +%TO.N,/BATLED1*% +X107191650Y-74103100D03* +D18* +%TO.P,J2,2,Pin_2_2*% +%TO.N,/BATLED2*% +X109731650Y-74103100D03* +%TO.P,J2,3,Pin_3_3*% +%TO.N,/BATLED3*% +X112271650Y-74103100D03* +%TO.P,J2,4,Pin_4_4*% +%TO.N,/BATLED4*% +X114811650Y-74103100D03* +%TO.P,J2,5,Pin_5_5*% +%TO.N,/CHRG_EN*% +X117351650Y-74103100D03* +%TO.P,J2,6,Pin_6_6*% +%TO.N,/USART1_TX*% +X119891650Y-74103100D03* +%TO.P,J2,7,Pin_7_7*% +%TO.N,USART1_RX*% +X122431650Y-74103100D03* +%TO.P,J2,8,Pin_8_8*% +%TO.N,unconnected-(J2-Pin_8-Pad8)*% +X124971650Y-74103100D03* +%TO.P,J2,9,Pin_9_9*% +%TO.N,unconnected-(J2-Pin_9-Pad9)*% +X127511650Y-74103100D03* +%TO.P,J2,10,Pin_10_10*% +%TO.N,unconnected-(J2-Pin_10-Pad10)*% +X130051650Y-74103100D03* +%TO.P,J2,11,Pin_11_11*% +%TO.N,/CHRG_STAT*% +X132591650Y-74103100D03* +%TO.P,J2,12,Pin_12_12*% +%TO.N,/CHRG_FAULT*% +X135131650Y-74103100D03* +%TO.P,J2,13,Pin_13_13*% +%TO.N,/BYP_CTRL*% +X137671650Y-74103100D03* +%TO.P,J2,14,Pin_14_14*% +%TO.N,/I2C_SCL*% +X140211650Y-74103100D03* +%TO.P,J2,15,Pin_15_15*% +%TO.N,/I2C_SDA*% +X142751650Y-74103100D03* +%TO.P,J2,16,Pin_16_16*% +%TO.N,unconnected-(J2-Pin_16-Pad16)*% +X145291650Y-74103100D03* +%TO.P,J2,17,Pin_17_17*% +%TO.N,unconnected-(J2-Pin_17-Pad17)*% +X147831650Y-74103100D03* +%TO.P,J2,18,Pin_18_18*% +%TO.N,/SYS5V*% +X150371650Y-74103100D03* +%TO.P,J2,19,Pin_19_19*% +%TO.N,GND*% +X152911650Y-74103100D03* +%TO.P,J2,20,Pin_20_20*% +%TO.N,3V3*% +X155451650Y-74103100D03* +%TD*% +D30* +%TO.P,SW1,1,1_1*% +%TO.N,/NRST*% +X199191650Y-133323100D03* +X205691650Y-133323100D03* +%TO.P,SW1,2,2_2*% +%TO.N,GND*% +X199191650Y-137823100D03* +X205691650Y-137823100D03* +%TD*% +D14* +%TO.P,P3,1,Pin_1_1*% +%TO.N,/SW_5V*% +X210191650Y-95323100D03* +D13* +%TO.P,P3,2,Pin_2_2*% +%TO.N,GND*% +X210191650Y-92823100D03* +%TO.P,P3,3,Pin_3_3*% +%TO.N,/GNSS_TX*% +X210191650Y-90323100D03* +%TO.P,P3,4,Pin_4_4*% +%TO.N,/GNSS_RX*% +X210191650Y-87823100D03* +%TD*% +D31* +%TO.P,MOD1,1,NC_1*% +%TO.N,unconnected-(MOD1-NC-Pad1)*% +X115251650Y-129583100D03* +D32* +%TO.P,MOD1,2,IOREF_2*% +%TO.N,3V3*% +X117791650Y-129583100D03* +%TO.P,MOD1,3,RESET_3*% +%TO.N,unconnected-(MOD1-RESET-Pad3)*% +X120331650Y-129583100D03* +%TO.P,MOD1,4,3V3_OUT_4*% +%TO.N,unconnected-(MOD1-3V3_OUT-Pad4)*% +X122871650Y-129583100D03* +%TO.P,MOD1,5,5V_5*% +%TO.N,/SW_5V*% +X125411650Y-129583100D03* +%TO.P,MOD1,6,GND_6*% +%TO.N,GND*% +X127951650Y-129583100D03* +%TO.P,MOD1,7,GND_7*% +X130491650Y-129583100D03* +%TO.P,MOD1,8,VIN_8*% +%TO.N,unconnected-(MOD1-VIN-Pad8)*% +X133031650Y-129583100D03* +%TO.P,MOD1,9,A0_9*% +%TO.N,unconnected-(MOD1-A0-Pad9)*% +X138111650Y-129583100D03* +%TO.P,MOD1,10,A1_10*% +%TO.N,unconnected-(MOD1-A1-Pad10)*% +X140651650Y-129583100D03* +%TO.P,MOD1,11,A2_11*% +%TO.N,unconnected-(MOD1-A2-Pad11)*% +X143191650Y-129583100D03* +%TO.P,MOD1,12,A3_12*% +%TO.N,unconnected-(MOD1-A3-Pad12)*% +X145731650Y-129583100D03* +%TO.P,MOD1,13,A4_13*% +%TO.N,unconnected-(MOD1-A4-Pad13)*% +X148271650Y-129583100D03* +%TO.P,MOD1,14,A5_14*% +%TO.N,unconnected-(MOD1-A5-Pad14)*% +X150811650Y-129583100D03* +%TO.P,MOD1,15,TX1_D0_15*% +%TO.N,/GNSS_RX*% +X150811650Y-81323100D03* +%TO.P,MOD1,16,RX1_D1_16*% +%TO.N,/GNSS_TX*% +X148271650Y-81323100D03* +%TO.P,MOD1,17,RX2_D2_17*% +%TO.N,/DOUT_4G*% +X145731650Y-81323100D03* +%TO.P,MOD1,18,D3_18*% +%TO.N,unconnected-(MOD1-D3-Pad18)*% +X143191650Y-81323100D03* +%TO.P,MOD1,19,D4_19*% +%TO.N,unconnected-(MOD1-D4-Pad19)*% +X140651650Y-81323100D03* +%TO.P,MOD1,20,D5_20*% +%TO.N,unconnected-(MOD1-D5-Pad20)*% +X138111650Y-81323100D03* +%TO.P,MOD1,21,D6_21*% +%TO.N,unconnected-(MOD1-D6-Pad21)*% +X135571650Y-81323100D03* +%TO.P,MOD1,22,D7_22*% +%TO.N,unconnected-(MOD1-D7-Pad22)*% +X133031650Y-81323100D03* +%TO.P,MOD1,23,TX2_D8_23*% +%TO.N,USART1_RX*% +X128971650Y-81323100D03* +%TO.P,MOD1,24,D9_24*% +%TO.N,unconnected-(MOD1-D9-Pad24)*% +X126431650Y-81323100D03* +%TO.P,MOD1,25,D10_25*% +%TO.N,unconnected-(MOD1-D10-Pad25)*% +X123891650Y-81323100D03* +%TO.P,MOD1,26,FENCE_D11_26*% +%TO.N,unconnected-(MOD1-FENCE_D11-Pad26)*% +X121351650Y-81323100D03* +%TO.P,MOD1,27,EXTINT_D12_27*% +%TO.N,unconnected-(MOD1-EXTINT_D12-Pad27)*% +X118811650Y-81323100D03* +%TO.P,MOD1,28,TPS_D13_28*% +%TO.N,unconnected-(MOD1-TPS_D13-Pad28)*% +X116271650Y-81323100D03* +%TO.P,MOD1,29,GND_29*% +%TO.N,GND*% +X113731650Y-81323100D03* +%TO.P,MOD1,30,AREF_30*% +%TO.N,unconnected-(MOD1-AREF-Pad30)*% +X111191650Y-81323100D03* +%TO.P,MOD1,31,SDA_31*% +%TO.N,unconnected-(MOD1-SDA-Pad31)*% +X108651650Y-81323100D03* +%TO.P,MOD1,32,SCL_32*% +%TO.N,unconnected-(MOD1-SCL-Pad32)*% +X106111650Y-81323100D03* +%TD*% +D33* +%TO.N,/GATE_LS*% +X160693550Y-59682200D03* +X154750000Y-63373100D03* +%TO.N,USART1_RX*% +X166039950Y-75929300D03* +X128569450Y-92441500D03* +X110777250Y-111539100D03* +%TO.N,/DIN_4G*% +X160280550Y-60946000D03* +X163333350Y-77836400D03* +%TO.N,GND*% +X109641650Y-76773100D03* +X88641650Y-111773100D03* +X158641650Y-48773100D03* +X165641650Y-55773100D03* +X137641650Y-48773100D03* +X102641650Y-132773100D03* +X102641650Y-118773100D03* +X81641650Y-132773100D03* +X137641650Y-41773100D03* +X194700000Y-105900000D03* +X109641650Y-125773100D03* +X191350000Y-114800000D03* +X116641650Y-97773100D03* +X88641650Y-97773100D03* +X95641650Y-76773100D03* +X109641650Y-132773100D03* +X130641650Y-132773100D03* +X126400000Y-95400000D03* +X109641650Y-62773100D03* +X81641650Y-76773100D03* +X88641650Y-41773100D03* +X102600000Y-99150000D03* +X116641650Y-132773100D03* +X144641650Y-48773100D03* +X88641650Y-104773100D03* +X144641650Y-132773100D03* +X158641650Y-125773100D03* +X109641650Y-90773100D03* +X102641650Y-125773100D03* +X151641650Y-118773100D03* +X158641650Y-132773100D03* +X137641650Y-132773100D03* +X158641650Y-83773100D03* +X95641650Y-132773100D03* +X195146650Y-110668100D03* +X158641650Y-111773100D03* +X88641650Y-76773100D03* +X81641650Y-62773100D03* +X88641650Y-48773100D03* +X130641650Y-69773100D03* +X99300000Y-114700000D03* +X177916650Y-45323100D03* +X116641650Y-125773100D03* +X123641650Y-48773100D03* +X81641650Y-41773100D03* +X138200000Y-91700000D03* +X137641650Y-111773100D03* +X116641650Y-118773100D03* +X88641650Y-83773100D03* +X123641650Y-125773100D03* +X144641650Y-111773100D03* +X165641650Y-41773100D03* +X130641650Y-111773100D03* +X95641650Y-104773100D03* +X123641650Y-83773100D03* +X130200000Y-99700000D03* +X81641650Y-111773100D03* +X123641650Y-69773100D03* +X116641650Y-76773100D03* +X81641650Y-104773100D03* +X187350000Y-62946400D03* +X88641650Y-132773100D03* +X87600000Y-58750000D03* +X144641650Y-41773100D03* +X130200000Y-106000000D03* +X130641650Y-76773100D03* +X81641650Y-48773100D03* +X116641650Y-62773100D03* +X109641650Y-97773100D03* +X116641650Y-48773100D03* +X88641650Y-90773100D03* +X95000000Y-114550000D03* +X81641650Y-83773100D03* +X81641650Y-118773100D03* +X151641650Y-104773100D03* +X88641650Y-69773100D03* +X95641650Y-90773100D03* +X95641650Y-118773100D03* +X81641650Y-69773100D03* +X151641650Y-132773100D03* +X95641650Y-125773100D03* +X81641650Y-97773100D03* +X151641650Y-41773100D03* +X135000000Y-97200000D03* +X88641650Y-118773100D03* +X158641650Y-69773100D03* +X109641650Y-118773100D03* +X165641650Y-48773100D03* +X158641650Y-41773100D03* +X102641650Y-48773100D03* +X95641650Y-41773100D03* +X81641650Y-55773100D03* +X165641650Y-69773100D03* +X95641650Y-111773100D03* +X88641650Y-125773100D03* +X123641650Y-132773100D03* +X127200000Y-118600000D03* +X81641650Y-90773100D03* +X151641650Y-125773100D03* +X123641650Y-76773100D03* +X81641650Y-125773100D03* +X101650000Y-85500000D03* +X144641650Y-118773100D03* +X100016650Y-94323100D03* +%TO.N,IGN_SENSE*% +X98158150Y-78069300D03* +X97851650Y-82803100D03* +X100361150Y-84328200D03* +X120700000Y-67650000D03* +%TO.N,SW_FAN*% +X166684150Y-63823100D03* +X170312950Y-55362600D03* +%TO.N,/5V_FAN*% +X179603350Y-49835200D03* +X190530850Y-50051900D03* +%TO.N,/FAN_RET*% +X108674350Y-96377200D03* +X154715450Y-93359800D03* +X102589950Y-100215700D03* +%TO.N,FAN_TACH_RAW*% +X99473450Y-103450700D03* +X175683950Y-98459400D03* +%TO.N,/EN_FAN*% +X173406650Y-53346300D03* +X174360750Y-60216800D03* +D34* +%TO.N,/BAT_PLUS*% +X119381650Y-89423100D03* +X126821650Y-89223100D03* +D33* +X93354250Y-109584900D03* +X116831650Y-109478500D03* +%TO.N,/NTC*% +X125531650Y-94123100D03* +X115743450Y-105395800D03* +%TO.N,/NRST*% +X124192950Y-57474800D03* +%TO.N,/SW3_NODE*% +X188691650Y-107616000D03* +X187096850Y-116026900D03* +%TO.N,/SW_5V*% +X171760150Y-97690900D03* +D34* +X202151650Y-113193100D03* +D33* +X171616850Y-113477300D03* +X156800000Y-63900000D03* +%TO.N,/FB3*% +X188669750Y-102323100D03* +X196890950Y-110544300D03* +X181474350Y-109498300D03* +%TO.N,/BST3*% +X187141650Y-107717500D03* +X192976150Y-114752100D03* +%TO.N,/BAT_SENSE*% +X92198550Y-67700900D03* +X92096650Y-109080400D03* +%TO.N,/PWR_CTRL*% +X161642250Y-61571200D03* +%TO.N,/5V_SENSE*% +X94238250Y-70412600D03* +X106831950Y-111582800D03* +%TO.N,FAN_PWM*% +X96481050Y-72166600D03* +X93366650Y-93338100D03* +%TO.N,EXT_LED*% +X93850000Y-69300000D03* +X91096750Y-104059500D03* +%TO.N,/NTC_TEMP*% +X164399250Y-108749200D03* +X169737250Y-114087200D03* +%TO.N,FAN_TACH*% +X147661250Y-69044000D03* +X96632650Y-78671100D03* +X98373850Y-101217400D03* +%TO.N,3V3*% +X134491750Y-98820000D03* +X94149150Y-84401600D03* +X99126050Y-102323100D03* +X133429550Y-103586000D03* +X153056550Y-96999800D03* +X132141650Y-111318200D03* +X94584350Y-46323100D03* +%TO.N,/COMP3_C*% +X185251750Y-114635100D03* +X185102650Y-116791200D03* +%TO.N,/MAIN5V*% +X125649250Y-91964400D03* +X118024250Y-91808100D03* +X101515750Y-77180100D03* +%TO.N,/SW_IN*% +X153600000Y-64200000D03* +X135500000Y-61250000D03* +X152216950Y-51550500D03* +X142150000Y-60950000D03* +%TO.N,FAN_GATE*% +X99480750Y-93353800D03* +X102921150Y-95462200D03* +%TO.N,/IGATE*% +X125151650Y-94993100D03* +X113056750Y-91373700D03* +%TO.N,/I2C_SDA*% +X126615050Y-111714800D03* +X101976450Y-75485300D03* +X127665550Y-92441500D03* +%TO.N,/MODEM_LED*% +X198850000Y-88800000D03* +X200050000Y-84450000D03* +%TO.N,/MODEM_LED_A*% +X203900000Y-86050000D03* +X203900000Y-89600000D03* +%TO.N,/I2C_SCL*% +X126634150Y-113349000D03* +X114758150Y-48379800D03* +X129603150Y-92460000D03* +X137323450Y-88991500D03* +%TO.N,/3V3_MODEM*% +X193850000Y-86850000D03* +X190900000Y-89050000D03* +X176066750Y-104039400D03* +X209550000Y-113750000D03* +%TO.N,/MODEM_RST*% +X141900000Y-135600000D03* +%TO.N,/USB_VBUS*% +X167850000Y-84700000D03* +%TO.N,/VEH5V*% +X117951650Y-94803100D03* +X124691650Y-94303100D03* +X166798050Y-79030300D03* +X102876050Y-80722800D03* +%TO.N,/LED_A*% +X177369150Y-107426100D03* +X101070250Y-115089600D03* +X99789850Y-107426100D03* +%TO.N,/24V_IN*% +X91070550Y-62038400D03* +%TO.N,/BASE_LS*% +X164501350Y-60325100D03* +X155562650Y-61161300D03* +%TO.N,/FB_FAN*% +X177545250Y-46302100D03* +X173372150Y-49792700D03* +%TO.N,BST_FAN*% +X168394750Y-46076200D03* +X166741750Y-55441500D03* +%TO.N,/SW_BAT*% +X163800000Y-91850000D03* +X131319350Y-83542700D03* +%TO.N,/BATLED3*% +X166527050Y-75260400D03* +X200007250Y-48492500D03* +%TO.N,/CLPROG_TP*% +X114646550Y-94202200D03* +X113191650Y-106044500D03* +%TO.N,/BATLED4*% +X169830950Y-65597500D03* +X183644750Y-51599100D03* +%TO.N,/F0_SEL*% +X141742750Y-98569500D03* +X124831650Y-95933100D03* +%TO.N,/LED_K*% +X173946950Y-108033000D03* +X110969350Y-113108400D03* +%TO.N,/BATLED2*% +X196017950Y-48827700D03* +X181693450Y-60961400D03* +%TO.N,/USB_CC2*% +X167500000Y-125600000D03* +%TO.N,IGN_IN*% +X104345350Y-71164600D03* +%TO.N,/PFI*% +X124054450Y-91327700D03* +X103327750Y-84222500D03* +X106503750Y-97236300D03* +X107654450Y-82308900D03* +%TO.N,/BATLED1*% +X189562750Y-50997400D03* +X164175850Y-64973500D03* +%TO.N,/CHRG_EN*% +X98082650Y-74113300D03* +X116831050Y-94436200D03* +X105480950Y-106336700D03* +%TO.N,/CHRG_STAT*% +X135231550Y-98013400D03* +X126664550Y-98079400D03* +X140542950Y-92479800D03* +%TO.N,/CHRG_FAULT*% +X144410950Y-96559700D03* +X127507350Y-95248400D03* +%TO.N,/PROG*% +X113901850Y-103113300D03* +X113519050Y-94430400D03* +%TO.N,/VFB_BST*% +X134239650Y-97200400D03* +X130447050Y-92807700D03* +X122002950Y-97751700D03* +%TO.N,/F2_SEL*% +X123382550Y-96548400D03* +X136675750Y-95494500D03* +%TO.N,/F1_SEL*% +X138135550Y-97466200D03* +X127321350Y-96853600D03* +%TD*% +%TO.N,/SYS5V*% +D35* +X157534150Y-58405600D02* +X189284150Y-58405600D01* +X155451650Y-56323100D02* +X157534150Y-58405600D01* +%TO.N,USART1_RX*% +D36* +X128569450Y-82276200D02* +X128569450Y-92441500D01* +X129522550Y-81323100D02* +X130073350Y-81323100D01* +X128971650Y-81323100D02* +X129522550Y-81323100D01* +X135467150Y-75929300D02* +X166039950Y-75929300D01* +X130073350Y-81323100D02* +X135467150Y-75929300D01* +X129522550Y-81323100D02* +X128569450Y-82276200D01* +%TO.N,/DIN_4G*% +X163333350Y-77836400D02* +X173204950Y-77836400D01* +X173204950Y-77836400D02* +X174191650Y-78823100D01* +X126208850Y-53120500D02* +X138641750Y-53120500D01* +X141481650Y-56716800D02* +X144348850Y-59584000D01* +X141481650Y-55960400D02* +X141481650Y-56716800D01* +X119843350Y-46323100D02* +X119843350Y-46755000D01* +X138641750Y-53120500D02* +X141481650Y-55960400D01* +X119843350Y-46755000D02* +X126208850Y-53120500D01* +X144348850Y-59584000D02* +X158918550Y-59584000D01* +X158918550Y-59584000D02* +X160280550Y-60946000D01* +X118691650Y-46323100D02* +X119843350Y-46323100D01* +%TO.N,IGN_SENSE*% +X120700000Y-67650000D02* +X120863800Y-67486200D01* +X120863800Y-67486200D02* +X121428550Y-67486200D01* +X121428550Y-67486200D02* +X132591650Y-56323100D01* +%TO.N,/5V_FAN*% +D37* +X190530850Y-50052000D02* +X190530850Y-50051900D01* +X198420550Y-50052000D02* +X190530850Y-50052000D01* +X210191650Y-61823100D02* +X198420550Y-50052000D01* +%TO.N,/FAN_RET*% +X138288950Y-93500000D02* +X138076650Y-93287700D01* +X122350550Y-93362000D02* +X115854050Y-93362000D01* +D38* +X126177150Y-93500000D02* +X125896450Y-93219300D01* +X129722850Y-93500000D02* +X126177150Y-93500000D01* +D37* +X111851050Y-93200500D02* +X108674350Y-96377200D01* +D38* +X130861950Y-93809400D02* +X130032250Y-93809400D01* +D37* +X122515450Y-93219300D02* +X122361650Y-93373100D01* +X154715450Y-93359800D02* +X154575250Y-93500000D01* +D38* +X135760850Y-93288900D02* +X131382450Y-93288900D01* +D37* +X138076650Y-93287700D02* +X135762050Y-93287700D01* +X115692550Y-93200500D02* +X111851050Y-93200500D01* +X135762050Y-93287700D02* +X135760850Y-93288900D01* +X122361650Y-93373100D02* +X122350550Y-93362000D01* +D38* +X125896450Y-93219300D02* +X122515450Y-93219300D01* +D37* +X115854050Y-93362000D02* +X115692550Y-93200500D01* +D38* +X130032250Y-93809400D02* +X129722850Y-93500000D01* +D37* +X154575250Y-93500000D02* +X138288950Y-93500000D01* +X131382450Y-93288900D02* +X130861950Y-93809400D01* +%TO.N,FAN_TACH_RAW*% +D36* +X99473450Y-103450700D02* +X100700450Y-102223700D01* +X100700450Y-102223700D02* +X171919650Y-102223700D01* +X171919650Y-102223700D02* +X175683950Y-98459400D01* +%TO.N,/BAT_PLUS*% +D39* +X119491650Y-89423100D02* +X119611650Y-89303100D01* +X124471650Y-92033100D02* +X125531650Y-90973100D01* +D37* +X126821650Y-89223100D02* +X126751650Y-89223100D01* +D39* +X119381650Y-89423100D02* +X119491650Y-89423100D01* +D35* +X116831650Y-109478500D02* +X93460650Y-109478500D01* +D39* +X124471650Y-92083100D02* +X124471650Y-92033100D01* +X119611650Y-89303100D02* +X120871650Y-89303100D01* +D35* +X93460650Y-109478500D02* +X93354250Y-109584900D01* +D39* +X123651650Y-92083100D02* +X124471650Y-92083100D01* +D37* +X126751650Y-89223100D02* +X126702050Y-89272700D01* +D39* +X125531650Y-90973100D02* +X125531650Y-90433100D01* +D38* +X125541650Y-90433100D02* +X125531650Y-90433100D01* +D39* +X126702050Y-89272700D02* +X125541650Y-90433100D01* +X120871650Y-89303100D02* +X123651650Y-92083100D01* +%TO.N,/NTC*% +D36* +X125531650Y-94123100D02* +X125661650Y-94253100D01* +X128135350Y-94457500D02* +X129546650Y-94457500D01* +X125711650Y-94263100D02* +X126101650Y-94263100D01* +X203070250Y-95050000D02* +X210191650Y-102171400D01* +X129546650Y-94457500D02* +X129700250Y-94611100D01* +X125661650Y-94253100D02* +X125701650Y-94253100D01* +X125701650Y-94253100D02* +X125711650Y-94263100D01* +X129700250Y-94611100D02* +X131193950Y-94611100D01* +X126119750Y-94245000D02* +X127922850Y-94245000D01* +X210191650Y-102171400D02* +X210191650Y-103323100D01* +X138705250Y-95050000D02* +X203070250Y-95050000D01* +X127922850Y-94245000D02* +X128135350Y-94457500D01* +X131714450Y-94090600D02* +X136092850Y-94090600D01* +X131193950Y-94611100D02* +X131714450Y-94090600D01* +X137257550Y-94089400D02* +X137258750Y-94090600D01* +X137258750Y-94090600D02* +X137745850Y-94090600D01* +X136092850Y-94090600D02* +X136094050Y-94089400D01* +X136094050Y-94089400D02* +X137257550Y-94089400D01* +X137745850Y-94090600D02* +X138705250Y-95050000D01* +X126101650Y-94263100D02* +X126119750Y-94245000D01* +%TO.N,/NRST*% +X199191650Y-133323100D02* +X205691650Y-133323100D01* +%TO.N,/SW_5V*% +D37* +X196851650Y-118493100D02* +X176632650Y-118493100D01* +X202151650Y-113193100D02* +X196851650Y-118493100D01* +X176632650Y-118493100D02* +X171616850Y-113477300D01* +%TO.N,/BAT_SENSE*% +D36* +X92198550Y-67700900D02* +X108513850Y-67700900D01* +X108513850Y-67700900D02* +X119891650Y-56323100D01* +%TO.N,/PWR_CTRL*% +X122431650Y-56323100D02* +X123607050Y-55147700D01* +X136401650Y-55959100D02* +X136401650Y-56716200D01* +X141634850Y-61949400D02* +X161264050Y-61949400D01* +X135590250Y-55147700D02* +X136401650Y-55959100D01* +X161264050Y-61949400D02* +X161642250Y-61571200D01* +X136401650Y-56716200D02* +X141634850Y-61949400D01* +X123607050Y-55147700D02* +X135590250Y-55147700D01* +%TO.N,/GNSS_RX*% +X158413350Y-87823100D02* +X151913350Y-81323100D01* +X210191650Y-87823100D02* +X158413350Y-87823100D01* +X150811650Y-81323100D02* +X151913350Y-81323100D01* +%TO.N,/5V_SENSE*% +X130051650Y-56323100D02* +X115962150Y-70412600D01* +X115962150Y-70412600D02* +X94238250Y-70412600D01* +%TO.N,FAN_PWM*% +X134563650Y-56323100D02* +X118720150Y-72166600D01* +X118720150Y-72166600D02* +X96481050Y-72166600D01* +X135131650Y-56323100D02* +X134563650Y-56323100D01* +%TO.N,EXT_LED*% +X138631550Y-54743000D02* +X140211650Y-56323100D01* +X93850000Y-69300000D02* +X95000000Y-68150000D01* +X121043350Y-56008800D02* +X122309150Y-54743000D01* +X122309150Y-54743000D02* +X138631550Y-54743000D01* +X121043350Y-56809500D02* +X121043350Y-56008800D01* +X109702850Y-68150000D02* +X121043350Y-56809500D01* +X95000000Y-68150000D02* +X109702850Y-68150000D01* +%TO.N,/NTC_TEMP*% +X210191650Y-121323100D02* +X176973150Y-121323100D01* +X176973150Y-121323100D02* +X169737250Y-114087200D01* +%TO.N,3V3*% +X135244750Y-99573000D02* +X150483350Y-99573000D01* +X134491750Y-98820000D02* +X135244750Y-99573000D01* +X150483350Y-99573000D02* +X153056550Y-96999800D01* +%TO.N,/MAIN5V*% +D35* +X109812350Y-83596200D02* +X118024250Y-91808100D01* +X101515750Y-77180100D02* +X101515750Y-81198900D01* +X101515750Y-81198900D02* +X103287650Y-82970800D01* +X103846250Y-82970800D02* +X104471650Y-83596200D01* +X104471650Y-83596200D02* +X109812350Y-83596200D01* +X103287650Y-82970800D02* +X103846250Y-82970800D01* +%TO.N,/I2C_SDA*% +D36* +X127665550Y-75710400D02* +X127665550Y-92441500D01* +X141369450Y-75485300D02* +X127890650Y-75485300D01* +X127890650Y-75485300D02* +X127665550Y-75710400D01* +X142751650Y-74103100D02* +X141369450Y-75485300D01* +X102201550Y-75710400D02* +X127665550Y-75710400D01* +X101976450Y-75485300D02* +X102201550Y-75710400D01* +%TO.N,/I2C_SCL*% +X133071650Y-88991500D02* +X129603150Y-92460000D01* +X137323450Y-88991500D02* +X133071650Y-88991500D01* +%TO.N,/3V3_MODEM*% +D37* +X204350000Y-94250000D02* +X212800000Y-102700000D01* +X193850000Y-94250000D02* +X204350000Y-94250000D01* +X190900000Y-89050000D02* +X192050000Y-89050000D01* +X212800000Y-110500000D02* +X209550000Y-113750000D01* +X212800000Y-102700000D02* +X212800000Y-110500000D01* +X192050000Y-89050000D02* +X193850000Y-90850000D01* +X193850000Y-90850000D02* +X193850000Y-94250000D01* +%TO.N,/DOUT_4G*% +D36* +X151195650Y-76823100D02* +X174191650Y-76823100D01* +X146833350Y-81185400D02* +X151195650Y-76823100D01* +X146833350Y-81323100D02* +X146833350Y-81185400D01* +X145731650Y-81323100D02* +X146833350Y-81323100D01* +%TO.N,/USB_VBUS*% +X162025000Y-129425000D02* +X162025000Y-130775000D01* +X163100000Y-131850000D02* +X165700000Y-131850000D01* +X166275000Y-131275000D02* +X166275000Y-130775000D01* +X165700000Y-131850000D02* +X166275000Y-131275000D01* +X162025000Y-130775000D02* +X163100000Y-131850000D01* +%TO.N,/USB_DM*% +X164575000Y-129425000D02* +X164575000Y-129675000D01* +X164575000Y-129675000D02* +X163725000Y-130525000D01* +X163725000Y-130525000D02* +X163725000Y-130775000D01* +%TO.N,/VEH5V*% +X117973550Y-94803100D02* +X117951650Y-94803100D01* +X124451650Y-94313100D02* +X124101650Y-93963100D01* +X91341650Y-70003100D02* +X91341650Y-65723100D01* +X112461650Y-100293100D02* +X110871650Y-100293100D01* +X106041650Y-91903100D02* +X87741650Y-73603100D01* +X91341650Y-65723100D02* +X93641650Y-63423100D01* +X124691650Y-94303100D02* +X124661650Y-94333100D01* +X122781685Y-95113065D02* +X118283515Y-95113065D01* +X124571650Y-94313100D02* +X124451650Y-94313100D01* +X87741650Y-73603100D02* +X91341650Y-70003100D01* +X124661650Y-94333100D02* +X124591650Y-94333100D01* +X93641650Y-63423100D02* +X93641650Y-42433100D01* +X124591650Y-94333100D02* +X124571650Y-94313100D01* +X123931650Y-93963100D02* +X122781685Y-95113065D01* +X106041650Y-95463100D02* +X106041650Y-91903100D01* +X124101650Y-93963100D02* +X123931650Y-93963100D01* +X123301650Y-42433100D02* +X127191650Y-46323100D01* +X118283515Y-95113065D02* +X117973550Y-94803100D01* +X117951650Y-94803100D02* +X112461650Y-100293100D01* +X93641650Y-42433100D02* +X123301650Y-42433100D01* +X110871650Y-100293100D02* +X106041650Y-95463100D01* +%TO.N,/LED_A*% +X99789850Y-107426100D02* +X177369150Y-107426100D01* +%TO.N,/BASE_LS*% +X155562650Y-61161300D02* +X155949050Y-61547700D01* +X161752350Y-60325100D02* +X164501350Y-60325100D01* +X160529750Y-61547700D02* +X161752350Y-60325100D01* +X155949050Y-61547700D02* +X160529750Y-61547700D01* +%TO.N,/USART1_TX*% +X119891650Y-74103100D02* +X121427950Y-72566800D01* +X188585150Y-61644600D02* +X194364150Y-55865600D01* +X121427950Y-72566800D02* +X170603350Y-72566800D01* +X181525550Y-61644600D02* +X188585150Y-61644600D01* +X170603350Y-72566800D02* +X181525550Y-61644600D01* +%TO.N,/SW_BAT*% +D35* +X163800000Y-91850000D02* +X163787000Y-91863000D01* +X134090450Y-83542700D02* +X131319350Y-83542700D01* +X142410750Y-91863000D02* +X134090450Y-83542700D01* +X163787000Y-91863000D02* +X142410750Y-91863000D01* +%TO.N,/F0_SEL*% +D36* +X125078850Y-95625900D02* +X125364750Y-95625900D01* +X137579450Y-94492300D02* +X141656650Y-98569500D01* +X129533950Y-95012800D02* +X131360250Y-95012800D01* +X129413650Y-94892500D02* +X129533950Y-95012800D01* +X136259150Y-94492300D02* +X136260350Y-94491100D01* +X137092450Y-94492300D02* +X137579450Y-94492300D01* +X126343950Y-94646700D02* +X127756550Y-94646700D01* +X141656650Y-98569500D02* +X141742750Y-98569500D01* +X127756550Y-94646700D02* +X128002350Y-94892500D01* +X131360250Y-95012800D02* +X131880750Y-94492300D01* +X128002350Y-94892500D02* +X129413650Y-94892500D01* +X136260350Y-94491100D02* +X137091250Y-94491100D01* +X125364750Y-95625900D02* +X126343950Y-94646700D01* +X124801650Y-95633100D02* +X125071650Y-95633100D01* +X131880750Y-94492300D02* +X136259150Y-94492300D01* +X125071650Y-95633100D02* +X125078850Y-95625900D01* +X124751650Y-95853100D02* +X124751650Y-95683100D01* +X124831650Y-95933100D02* +X124751650Y-95853100D01* +X124751650Y-95683100D02* +X124801650Y-95633100D01* +X137091250Y-94491100D02* +X137092450Y-94492300D01* +%TO.N,/LED_K*% +X131850750Y-110718000D02* +X134535750Y-108033000D01* +X110969350Y-113108400D02* +X113359750Y-110718000D01* +X113359750Y-110718000D02* +X131850750Y-110718000D01* +X134535750Y-108033000D02* +X173946950Y-108033000D01* +%TO.N,/BATLED2*% +X181639250Y-60961400D02* +X181693450Y-60961400D01* +X119069250Y-72951400D02* +X129669550Y-62351100D01* +X129669550Y-62351100D02* +X180249550Y-62351100D01* +X180249550Y-62351100D02* +X181639250Y-60961400D01* +X109731650Y-74103100D02* +X110883350Y-72951400D01* +X110883350Y-72951400D02* +X119069250Y-72951400D01* +%TO.N,/PFI*% +X115211250Y-82484500D02* +X124054450Y-91327700D01* +X107830050Y-82484500D02* +X115211250Y-82484500D01* +X107654450Y-82308900D02* +X107830050Y-82484500D01* +%TO.N,/CHRG_EN*% +X106241550Y-75285200D02* +X105069650Y-74113300D01* +X117351650Y-74103100D02* +X116169550Y-75285200D01* +X116169550Y-75285200D02* +X106241550Y-75285200D01* +X105069650Y-74113300D02* +X98082650Y-74113300D01* +%TO.N,/CHRG_STAT*% +X135165550Y-98079400D02* +X126664550Y-98079400D01* +X135231550Y-98013400D02* +X135165550Y-98079400D01* +%TO.N,/CHRG_FAULT*% +X142016750Y-99171300D02* +X141488950Y-99171300D01* +X136926150Y-94894000D02* +X136924950Y-94892800D01* +X141488950Y-99171300D02* +X137211650Y-94894000D01* +X144410950Y-96559700D02* +X144410950Y-96777100D01* +X136425450Y-94894000D02* +X132213250Y-94894000D01* +X136426650Y-94892800D02* +X136425450Y-94894000D01* +X144410950Y-96777100D02* +X142016750Y-99171300D01* +X127673450Y-95414500D02* +X127507350Y-95248400D01* +X131692750Y-95414500D02* +X127673450Y-95414500D01* +X132213250Y-94894000D02* +X131692750Y-95414500D01* +X136924950Y-94892800D02* +X136426650Y-94892800D01* +X137211650Y-94894000D02* +X136926150Y-94894000D01* +%TO.N,/VFB_BST*% +X122280950Y-97473700D02* +X133966350Y-97473700D01* +X133966350Y-97473700D02* +X134239650Y-97200400D01* +X122002950Y-97751700D02* +X122280950Y-97473700D01* +%TO.N,/F2_SEL*% +X126842050Y-95850200D02* +X136320050Y-95850200D01* +X123382550Y-96548400D02* +X126143850Y-96548400D01* +X126143850Y-96548400D02* +X126842050Y-95850200D01* +X136320050Y-95850200D02* +X136675750Y-95494500D01* +%TO.N,/F1_SEL*% +X127321350Y-96853600D02* +X127625050Y-96549900D01* +X127625050Y-96549900D02* +X137219250Y-96549900D01* +X137219250Y-96549900D02* +X138135550Y-97466200D01* +%TD*% +%TA.AperFunction,Conductor*% +%TO.N,GND*% +G36* +X130025725Y-129390107D02* +G01* +X129991650Y-129517274D01* +X129991650Y-129648926D01* +X130025725Y-129776093D01* +X130058638Y-129833100D01* +X128384662Y-129833100D01* +X128417575Y-129776093D01* +X128451650Y-129648926D01* +X128451650Y-129517274D01* +X128417575Y-129390107D01* +X128384662Y-129333100D01* +X130058638Y-129333100D01* +X130025725Y-129390107D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X124300812Y-55417107D02* +G01* +X124336776Y-55466607D01* +X124336776Y-55527793D01* +X124312625Y-55567204D01* +X124194514Y-55685314D01* +X124194511Y-55685318D01* +X124085017Y-55849186D01* +X124009599Y-56031263D01* +X124009599Y-56031265D01* +X123971150Y-56224556D01* +X123971150Y-56421643D01* +X124009599Y-56614934D01* +X124009599Y-56614936D01* +X124085017Y-56797014D01* +X124085019Y-56797016D01* +X124144453Y-56885966D01* +X124161062Y-56944854D01* +X124139884Y-57002257D01* +X124089011Y-57036250D01* +X124087818Y-57036578D01* +X124049910Y-57046735D01* +X124019059Y-57055002D01* +X123916341Y-57114307D01* +X123832457Y-57198191D01* +X123773152Y-57300909D01* +X123755987Y-57364969D01* +X123742450Y-57415491D01* +X123742450Y-57534109D01* +X123753191Y-57574195D01* +X123773152Y-57648690D01* +X123832457Y-57751408D01* +X123832459Y-57751410D01* +X123832461Y-57751413D01* +X123916337Y-57835289D01* +X123916339Y-57835290D01* +X123916341Y-57835292D01* +X124019060Y-57894597D01* +X124019061Y-57894597D01* +X124019064Y-57894599D01* +X124133641Y-57925300D01* +X124133643Y-57925300D01* +X124252257Y-57925300D01* +X124252259Y-57925300D01* +X124366836Y-57894599D01* +X124366838Y-57894597D01* +X124366840Y-57894597D01* +X124469558Y-57835292D01* +X124469558Y-57835291D01* +X124469563Y-57835289D01* +X124553439Y-57751413D01* +X124581642Y-57702564D01* +X124612747Y-57648690D01* +X124612747Y-57648688D01* +X124612749Y-57648686D01* +X124643450Y-57534109D01* +X124643450Y-57415491D01* +X124643449Y-57415488D01* +X124642884Y-57411198D01* +X124654029Y-57351036D01* +X124698409Y-57308915D01* +X124759070Y-57300924D01* +X124760236Y-57301148D01* +X124873109Y-57323600D01* +X124873110Y-57323600D01* +X125070190Y-57323600D01* +X125070191Y-57323600D01* +X125263485Y-57285151D01* +X125445564Y-57209732D01* +X125609432Y-57100239D01* +X125748789Y-56960882D01* +X125858282Y-56797014D01* +X125933701Y-56614935D01* +X125972150Y-56421641D01* +X125972150Y-56224559D01* +X125933701Y-56031265D01* +X125858282Y-55849186D01* +X125748789Y-55685318D01* +X125630675Y-55567204D01* +X125602898Y-55512687D01* +X125612469Y-55452255D01* +X125655734Y-55408990D01* +X125700679Y-55398200D01* +X126782621Y-55398200D01* +X126840812Y-55417107D01* +X126876776Y-55466607D01* +X126876776Y-55527793D01* +X126852625Y-55567204D01* +X126734514Y-55685314D01* +X126734511Y-55685318D01* +X126625017Y-55849186D01* +X126549599Y-56031263D01* +X126549599Y-56031265D01* +X126511150Y-56224556D01* +X126511150Y-56421643D01* +X126549599Y-56614934D01* +X126549599Y-56614936D01* +X126625017Y-56797013D01* +X126652558Y-56838231D01* +X126734511Y-56960882D01* +X126873868Y-57100239D01* +X127037736Y-57209732D01* +X127219815Y-57285151D01* +X127413109Y-57323600D01* +X127413110Y-57323600D01* +X127610190Y-57323600D01* +X127610191Y-57323600D01* +X127803485Y-57285151D01* +X127985564Y-57209732D01* +X128149432Y-57100239D01* +X128288789Y-56960882D01* +X128398282Y-56797014D01* +X128473701Y-56614935D01* +X128512150Y-56421641D01* +X128512150Y-56224559D01* +X128473701Y-56031265D01* +X128398282Y-55849186D01* +X128288789Y-55685318D01* +X128170675Y-55567204D01* +X128142898Y-55512687D01* +X128152469Y-55452255D01* +X128195734Y-55408990D01* +X128240679Y-55398200D01* +X129322621Y-55398200D01* +X129380812Y-55417107D01* +X129416776Y-55466607D01* +X129416776Y-55527793D01* +X129392625Y-55567204D01* +X129274514Y-55685314D01* +X129274511Y-55685318D01* +X129165017Y-55849186D01* +X129089599Y-56031263D01* +X129089599Y-56031265D01* +X129051150Y-56224556D01* +X129051150Y-56421643D01* +X129089599Y-56614934D01* +X129089599Y-56614936D01* +X129156824Y-56777234D01* +X129161624Y-56838231D01* +X129135364Y-56885123D01* +X115887385Y-70133104D01* +X115832868Y-70160881D01* +X115817381Y-70162100D01* +X94665859Y-70162100D01* +X94607668Y-70143193D01* +X94595861Y-70133109D01* +X94514863Y-70052111D01* +X94514860Y-70052109D01* +X94514858Y-70052107D01* +X94412139Y-69992802D01* +X94412140Y-69992802D01* +X94382119Y-69984758D01* +X94297559Y-69962100D01* +X94178941Y-69962100D01* +X94108817Y-69980889D01* +X94064359Y-69992802D01* +X93961641Y-70052107D01* +X93877757Y-70135991D01* +X93818452Y-70238709D01* +X93818451Y-70238714D01* +X93787750Y-70353291D01* +X93787750Y-70471909D01* +X93814824Y-70572951D01* +X93818452Y-70586490D01* +X93877757Y-70689208D01* +X93877759Y-70689210D01* +X93877761Y-70689213D01* +X93961637Y-70773089D01* +X93961639Y-70773090D01* +X93961641Y-70773092D01* +X94064360Y-70832397D01* +X94064361Y-70832397D01* +X94064364Y-70832399D01* +X94178941Y-70863100D01* +X94178943Y-70863100D01* +X94297557Y-70863100D01* +X94297559Y-70863100D01* +X94412136Y-70832399D01* +X94412138Y-70832397D01* +X94412140Y-70832397D01* +X94514858Y-70773092D01* +X94514858Y-70773091D01* +X94514863Y-70773089D01* +X94595857Y-70692094D01* +X94650372Y-70664319D01* +X94665859Y-70663100D01* +X103970741Y-70663100D01* +X104028932Y-70682007D01* +X104064896Y-70731507D01* +X104064896Y-70792693D01* +X104040746Y-70832101D01* +X104009748Y-70863100D01* +X103984858Y-70887990D01* +X103984857Y-70887991D01* +X103925552Y-70990709D01* +X103925551Y-70990714D01* +X103894850Y-71105291D01* +X103894850Y-71223909D01* +X103921924Y-71324951D01* +X103925552Y-71338490D01* +X103984857Y-71441208D01* +X103984859Y-71441210D01* +X103984861Y-71441213D01* +X104068737Y-71525089D01* +X104068739Y-71525090D01* +X104068741Y-71525092D01* +X104171460Y-71584397D01* +X104171461Y-71584397D01* +X104171464Y-71584399D01* +X104286041Y-71615100D01* +X104286043Y-71615100D01* +X104404657Y-71615100D01* +X104404659Y-71615100D01* +X104519236Y-71584399D01* +X104519238Y-71584397D01* +X104519240Y-71584397D01* +X104621958Y-71525092D01* +X104621958Y-71525091D01* +X104621963Y-71525089D01* +X104705839Y-71441213D01* +X104765149Y-71338486D01* +X104795850Y-71223909D01* +X104795850Y-71105291D01* +X104765149Y-70990714D01* +X104765147Y-70990711D01* +X104765147Y-70990709D01* +X104705842Y-70887991D01* +X104705840Y-70887989D01* +X104705839Y-70887987D01* +X104649953Y-70832101D01* +X104622178Y-70777587D01* +X104631749Y-70717155D01* +X104675014Y-70673890D01* +X104719959Y-70663100D01* +X116011979Y-70663100D01* +X116070035Y-70639051D01* +X116104047Y-70624964D01* +X129489627Y-57239382D01* +X129544142Y-57211607D01* +X129597512Y-57217923D01* +X129759815Y-57285151D01* +X129953109Y-57323600D01* +X129953110Y-57323600D01* +X130150190Y-57323600D01* +X130150191Y-57323600D01* +X130343485Y-57285151D01* +X130525564Y-57209732D01* +X130689432Y-57100239D01* +X130828789Y-56960882D01* +X130938282Y-56797014D01* +X131013701Y-56614935D01* +X131052150Y-56421641D01* +X131052150Y-56224559D01* +X131013701Y-56031265D01* +X130938282Y-55849186D01* +X130828789Y-55685318D01* +X130710675Y-55567204D01* +X130682898Y-55512687D01* +X130692469Y-55452255D01* +X130735734Y-55408990D01* +X130780679Y-55398200D01* +X131862621Y-55398200D01* +X131920812Y-55417107D01* +X131956776Y-55466607D01* +X131956776Y-55527793D01* +X131932625Y-55567204D01* +X131814514Y-55685314D01* +X131814511Y-55685318D01* +X131705017Y-55849186D01* +X131629599Y-56031263D01* +X131629599Y-56031265D01* +X131591150Y-56224556D01* +X131591150Y-56421643D01* +X131629599Y-56614934D01* +X131629599Y-56614936D01* +X131696824Y-56777234D01* +X131701624Y-56838231D01* +X131675364Y-56885123D01* +X121353785Y-67206704D01* +X121299268Y-67234481D01* +X121283781Y-67235700D01* +X120906854Y-67235700D01* +X120880533Y-67230465D01* +X120880154Y-67231881D01* +X120873887Y-67230201D01* +X120873886Y-67230201D01* +X120759309Y-67199500D01* +X120640691Y-67199500D01* +X120570567Y-67218289D01* +X120526109Y-67230202D01* +X120423391Y-67289507D01* +X120339507Y-67373391D01* +X120280202Y-67476109D01* +X120280201Y-67476114D01* +X120249500Y-67590691D01* +X120249500Y-67709309D01* +X120256876Y-67736836D01* +X120280202Y-67823890D01* +X120339507Y-67926608D01* +X120339509Y-67926610D01* +X120339511Y-67926613D01* +X120423387Y-68010489D01* +X120423389Y-68010490D01* +X120423391Y-68010492D01* +X120526110Y-68069797D01* +X120526111Y-68069797D01* +X120526114Y-68069799D01* +X120640691Y-68100500D01* +X120640693Y-68100500D01* +X120759307Y-68100500D01* +X120759309Y-68100500D01* +X120873886Y-68069799D01* +X120873888Y-68069797D01* +X120873890Y-68069797D01* +X120976608Y-68010492D01* +X120976608Y-68010491D01* +X120976613Y-68010489D01* +X121060489Y-67926613D01* +X121119799Y-67823886D01* +X121123500Y-67810075D01* +X121156825Y-67758761D01* +X121213947Y-67736836D01* +X121219126Y-67736700D01* +X121478379Y-67736700D01* +X121544511Y-67709307D01* +X121570447Y-67698564D01* +X132029627Y-57239382D01* +X132084142Y-57211607D01* +X132137512Y-57217923D01* +X132299815Y-57285151D01* +X132493109Y-57323600D01* +X132493110Y-57323600D01* +X132690190Y-57323600D01* +X132690191Y-57323600D01* +X132883485Y-57285151D01* +X133044799Y-57218332D01* +X133105794Y-57213532D01* +X133157963Y-57245502D01* +X133181378Y-57302030D01* +X133167094Y-57361524D01* +X133152687Y-57379801D01* +X118645385Y-71887104D01* +X118590868Y-71914881D01* +X118575381Y-71916100D01* +X96908659Y-71916100D01* +X96850468Y-71897193D01* +X96838661Y-71887109D01* +X96757663Y-71806111D01* +X96757660Y-71806109D01* +X96757658Y-71806107D01* +X96654939Y-71746802D01* +X96654940Y-71746802D01* +X96641401Y-71743174D01* +X96540359Y-71716100D01* +X96421741Y-71716100D01* +X96351617Y-71734889D01* +X96307159Y-71746802D01* +X96204441Y-71806107D01* +X96120557Y-71889991D01* +X96061252Y-71992709D01* +X96061251Y-71992714D01* +X96030550Y-72107291D01* +X96030550Y-72225909D01* +X96047001Y-72287304D01* +X96061252Y-72340490D01* +X96120557Y-72443208D01* +X96120559Y-72443210D01* +X96120561Y-72443213D01* +X96204437Y-72527089D01* +X96204439Y-72527090D01* +X96204441Y-72527092D01* +X96307160Y-72586397D01* +X96307161Y-72586397D01* +X96307164Y-72586399D01* +X96421741Y-72617100D01* +X96421743Y-72617100D01* +X96540357Y-72617100D01* +X96540359Y-72617100D01* +X96654936Y-72586399D01* +X96654938Y-72586397D01* +X96654940Y-72586397D01* +X96757658Y-72527092D01* +X96757658Y-72527091D01* +X96757663Y-72527089D01* +X96838657Y-72446094D01* +X96893172Y-72418319D01* +X96908659Y-72417100D01* +X118769979Y-72417100D01* +X118828035Y-72393051D01* +X118862047Y-72378964D01* +X130050318Y-61190691D01* +X135049500Y-61190691D01* +X135049500Y-61309309D01* +X135067154Y-61375193D01* +X135080202Y-61423890D01* +X135139507Y-61526608D01* +X135139509Y-61526610D01* +X135139511Y-61526613D01* +X135223387Y-61610489D01* +X135223389Y-61610490D01* +X135223391Y-61610492D01* +X135326110Y-61669797D01* +X135326111Y-61669797D01* +X135326114Y-61669799D01* +X135440691Y-61700500D01* +X135440693Y-61700500D01* +X135559307Y-61700500D01* +X135559309Y-61700500D01* +X135673886Y-61669799D01* +X135673888Y-61669797D01* +X135673890Y-61669797D01* +X135776608Y-61610492D01* +X135776608Y-61610491D01* +X135776613Y-61610489D01* +X135860489Y-61526613D01* +X135868989Y-61511891D01* +X135919797Y-61423890D01* +X135919797Y-61423888D01* +X135919799Y-61423886D01* +X135950500Y-61309309D01* +X135950500Y-61190691D01* +X135919799Y-61076114D01* +X135919797Y-61076111D01* +X135919797Y-61076109D01* +X135860492Y-60973391D01* +X135860490Y-60973389D01* +X135860489Y-60973387D01* +X135776613Y-60889511D01* +X135776610Y-60889509D01* +X135776608Y-60889507D01* +X135673889Y-60830202D01* +X135673890Y-60830202D01* +X135645519Y-60822600D01* +X135559309Y-60799500D01* +X135440691Y-60799500D01* +X135370567Y-60818289D01* +X135326109Y-60830202D01* +X135223391Y-60889507D01* +X135139507Y-60973391D01* +X135080202Y-61076109D01* +X135067400Y-61123886D01* +X135049500Y-61190691D01* +X130050318Y-61190691D01* +X134247317Y-56993691D01* +X134301832Y-56965916D01* +X134362264Y-56975487D01* +X134387323Y-56993694D01* +X134493859Y-57100231D01* +X134493863Y-57100234D01* +X134493868Y-57100239D01* +X134657736Y-57209732D01* +X134839815Y-57285151D01* +X135033109Y-57323600D01* +X135033110Y-57323600D01* +X135230190Y-57323600D01* +X135230191Y-57323600D01* +X135423485Y-57285151D01* +X135605564Y-57209732D01* +X135769432Y-57100239D01* +X135908789Y-56960882D01* +X136005327Y-56816402D01* +X136053375Y-56778524D01* +X136114514Y-56776122D01* +X136165387Y-56810115D01* +X136179105Y-56833519D01* +X136189284Y-56858094D01* +X136189285Y-56858095D01* +X136189286Y-56858097D01* +X138736776Y-59405587D01* +X141262785Y-61931596D01* +X141290562Y-61986113D01* +X141280991Y-62046545D01* +X141237726Y-62089810D01* +X141192781Y-62100600D01* +X129619721Y-62100600D01* +X129527655Y-62138734D01* +X118994485Y-72671904D01* +X118939968Y-72699681D01* +X118924481Y-72700900D01* +X110944709Y-72700900D01* +X110944701Y-72700899D01* +X110933178Y-72700899D01* +X110833522Y-72700899D01* +X110833521Y-72700899D01* +X110806555Y-72712068D01* +X110768419Y-72727865D01* +X110752623Y-72734408D01* +X110741452Y-72739036D01* +X110670985Y-72809504D01* +X110670984Y-72809504D01* +X110293673Y-73186814D01* +X110239157Y-73214591D01* +X110185785Y-73208274D01* +X110023485Y-73141049D01* +X109830193Y-73102600D01* +X109830191Y-73102600D01* +X109633109Y-73102600D01* +X109633106Y-73102600D01* +X109439815Y-73141049D01* +X109439813Y-73141049D01* +X109257736Y-73216467D01* +X109093868Y-73325961D01* +X109093864Y-73325964D01* +X108954514Y-73465314D01* +X108954511Y-73465318D01* +X108845017Y-73629186D01* +X108769599Y-73811263D01* +X108769599Y-73811265D01* +X108731150Y-74004556D01* +X108731150Y-74201643D01* +X108769599Y-74394934D01* +X108769599Y-74394936D01* +X108845017Y-74577013D01* +X108862448Y-74603100D01* +X108954511Y-74740882D01* +X108954514Y-74740885D01* +X109079325Y-74865696D01* +X109107102Y-74920213D01* +X109097531Y-74980645D01* +X109054266Y-75023910D01* +X109009321Y-75034700D01* +X108291150Y-75034700D01* +X108232959Y-75015793D01* +X108196995Y-74966293D01* +X108192150Y-74935700D01* +X108192150Y-73238281D01* +X108192149Y-73238272D01* +X108183417Y-73194379D01* +X108183415Y-73194375D01* +X108175268Y-73182182D01* +X108150154Y-73144596D01* +X108149490Y-73144152D01* +X108100374Y-73111334D01* +X108100370Y-73111332D01* +X108056477Y-73102600D01* +X108056470Y-73102600D01* +X106326830Y-73102600D01* +X106326822Y-73102600D01* +X106282929Y-73111332D01* +X106282925Y-73111334D01* +X106233148Y-73144594D01* +X106233144Y-73144598D01* +X106199884Y-73194375D01* +X106199882Y-73194379D01* +X106191150Y-73238272D01* +X106191150Y-74641531D01* +X106172243Y-74699722D01* +X106122743Y-74735686D01* +X106061557Y-74735686D01* +X106022146Y-74711535D01* +X105674411Y-74363800D01* +X105211547Y-73900936D01* +X105211545Y-73900935D01* +X105211544Y-73900934D01* +X105119479Y-73862800D01* +X105119478Y-73862800D01* +X98510259Y-73862800D01* +X98452068Y-73843893D01* +X98440261Y-73833809D01* +X98359263Y-73752811D01* +X98359260Y-73752809D01* +X98359258Y-73752807D01* +X98256539Y-73693502D01* +X98256540Y-73693502D01* +X98243001Y-73689874D01* +X98141959Y-73662800D01* +X98023341Y-73662800D01* +X97953217Y-73681589D01* +X97908759Y-73693502D01* +X97806041Y-73752807D01* +X97722157Y-73836691D01* +X97662852Y-73939409D01* +X97662851Y-73939414D01* +X97632150Y-74053991D01* +X97632150Y-74172609D01* +X97659224Y-74273651D01* +X97662852Y-74287190D01* +X97722157Y-74389908D01* +X97722159Y-74389910D01* +X97722161Y-74389913D01* +X97806037Y-74473789D01* +X97806039Y-74473790D01* +X97806041Y-74473792D01* +X97908760Y-74533097D01* +X97908761Y-74533097D01* +X97908764Y-74533099D01* +X98023341Y-74563800D01* +X98023343Y-74563800D01* +X98141957Y-74563800D01* +X98141959Y-74563800D01* +X98256536Y-74533099D01* +X98256538Y-74533097D01* +X98256540Y-74533097D01* +X98359258Y-74473792D01* +X98359258Y-74473791D01* +X98359263Y-74473789D01* +X98440257Y-74392794D01* +X98494772Y-74365019D01* +X98510259Y-74363800D01* +X104924881Y-74363800D01* +X104983072Y-74382707D01* +X104994885Y-74392796D01* +X105482628Y-74880539D01* +X105892986Y-75290896D01* +X105920763Y-75345413D01* +X105911192Y-75405845D01* +X105867927Y-75449110D01* +X105822982Y-75459900D01* +X102512001Y-75459900D01* +X102453810Y-75440993D01* +X102417846Y-75391493D01* +X102416379Y-75386541D01* +X102396249Y-75311414D01* +X102396247Y-75311411D01* +X102396247Y-75311409D01* +X102336942Y-75208691D01* +X102336940Y-75208689D01* +X102336939Y-75208687D01* +X102253063Y-75124811D01* +X102253060Y-75124809D01* +X102253058Y-75124807D01* +X102150339Y-75065502D01* +X102150340Y-75065502D01* +X102136801Y-75061874D01* +X102035759Y-75034800D01* +X101917141Y-75034800D01* +X101847017Y-75053589D01* +X101802559Y-75065502D01* +X101699841Y-75124807D01* +X101615957Y-75208691D01* +X101556652Y-75311409D01* +X101547541Y-75345413D01* +X101525950Y-75425991D01* +X101525950Y-75544609D01* +X101532435Y-75568811D01* +X101556652Y-75659190D01* +X101615957Y-75761908D01* +X101615959Y-75761910D01* +X101615961Y-75761913D01* +X101699837Y-75845789D01* +X101699839Y-75845790D01* +X101699841Y-75845792D01* +X101802560Y-75905097D01* +X101802561Y-75905097D01* +X101802564Y-75905099D01* +X101917141Y-75935800D01* +X101917143Y-75935800D01* +X102035760Y-75935800D01* +X102036909Y-75935492D01* +X102037762Y-75935536D01* +X102042196Y-75934953D01* +X102042304Y-75935774D01* +X102098011Y-75938688D01* +X102100365Y-75939626D01* +X102151722Y-75960900D01* +X102251377Y-75960900D01* +X127316050Y-75960900D01* +X127374241Y-75979807D01* +X127410205Y-76029307D01* +X127415050Y-76059900D01* +X127415050Y-80757647D01* +X127396143Y-80815838D01* +X127346643Y-80851802D01* +X127285457Y-80851802D01* +X127235957Y-80815838D01* +X127233735Y-80812649D01* +X127196983Y-80757647D01* +X127169952Y-80717192D01* +X127037558Y-80584798D01* +X126983854Y-80548914D01* +X126881888Y-80480781D01* +X126881879Y-80480777D01* +X126708899Y-80409126D01* +X126525268Y-80372600D01* +X126525266Y-80372600D01* +X126338034Y-80372600D01* +X126338031Y-80372600D01* +X126154400Y-80409126D01* +X125981420Y-80480777D01* +X125981411Y-80480781D01* +X125825742Y-80584798D01* +X125825738Y-80584801D01* +X125693351Y-80717188D01* +X125693348Y-80717192D01* +X125589331Y-80872861D01* +X125589327Y-80872870D01* +X125517676Y-81045850D01* +X125481150Y-81229481D01* +X125481150Y-81416718D01* +X125517676Y-81600349D01* +X125589327Y-81773329D01* +X125589331Y-81773338D01* +X125645965Y-81858095D01* +X125693348Y-81929008D01* +X125825742Y-82061402D01* +X125890104Y-82104407D01* +X125981411Y-82165418D01* +X125981417Y-82165420D01* +X125981419Y-82165422D01* +X126154399Y-82237073D01* +X126338034Y-82273600D01* +X126338035Y-82273600D01* +X126525265Y-82273600D01* +X126525266Y-82273600D01* +X126708901Y-82237073D01* +X126881881Y-82165422D01* +X126881884Y-82165419D01* +X126881888Y-82165418D01* +X126928454Y-82134303D01* +X127037558Y-82061402D01* +X127169952Y-81929008D01* +X127233735Y-81833550D01* +X127281785Y-81795671D01* +X127342923Y-81793269D01* +X127393797Y-81827262D01* +X127414974Y-81884666D01* +X127415050Y-81888552D01* +X127415050Y-88657547D01* +X127396143Y-88715738D01* +X127346643Y-88751702D01* +X127285457Y-88751702D01* +X127246046Y-88727551D01* +X127236322Y-88717827D01* +X127236319Y-88717824D01* +X127193876Y-88689465D01* +X127129783Y-88646638D01* +X127129775Y-88646634D01* +X127011397Y-88597600D01* +X127011395Y-88597599D01* +X127011394Y-88597599D01* +X126885719Y-88572600D01* +X126687581Y-88572600D01* +X126687580Y-88572600D01* +X126638772Y-88582309D01* +X126561906Y-88597599D01* +X126561905Y-88597599D01* +X126561902Y-88597600D01* +X126443523Y-88646634D01* +X126336984Y-88717820D01* +X126196770Y-88858034D01* +X126125583Y-88964575D01* +X126076549Y-89082954D01* +X126076549Y-89082956D01* +X126051551Y-89208628D01* +X126051551Y-89315797D01* +X126032644Y-89373988D01* +X126022555Y-89385801D01* +X125529753Y-89878604D01* +X125475236Y-89906381D01* +X125466509Y-89907067D01* +X125462469Y-89907599D01* +X125328814Y-89943412D01* +X125208985Y-90012595D01* +X125111145Y-90110435D01* +X125041962Y-90230264D01* +X125006150Y-90363917D01* +X125006150Y-90502283D01* +X125041962Y-90635935D01* +X125041963Y-90635938D01* +X125099313Y-90735271D01* +X125112035Y-90795119D01* +X125087148Y-90851015D01* +X125083580Y-90854775D01* +X124661070Y-91277284D01* +X124606554Y-91305061D01* +X124546122Y-91295490D01* +X124502857Y-91252225D01* +X124495443Y-91232911D01* +X124474249Y-91153814D01* +X124474247Y-91153811D01* +X124474247Y-91153809D01* +X124414942Y-91051091D01* +X124414940Y-91051089D01* +X124414939Y-91051087D01* +X124331063Y-90967211D01* +X124331060Y-90967209D01* +X124331058Y-90967207D01* +X124228339Y-90907902D01* +X124228340Y-90907902D01* +X124214801Y-90904274D01* +X124113759Y-90877200D01* +X123999219Y-90877200D01* +X123941028Y-90858293D01* +X123929215Y-90848204D01* +X119654398Y-86573387D01* +X115353147Y-82272136D01* +X115353145Y-82272135D01* +X115353144Y-82272134D01* +X115261079Y-82234000D01* +X115261078Y-82234000D01* +X114871030Y-82234000D01* +X114812839Y-82215093D01* +X114776875Y-82165593D01* +X114776875Y-82104407D01* +X114790937Y-82076809D01* +X114843511Y-82004447D01* +X114936406Y-81822127D01* +X114999640Y-81627514D01* +X115008259Y-81573100D01* +X114164662Y-81573100D01* +X114197575Y-81516093D01* +X114231650Y-81388926D01* +X114231650Y-81257274D01* +X114224203Y-81229481D01* +X115321150Y-81229481D01* +X115321150Y-81416718D01* +X115357676Y-81600349D01* +X115429327Y-81773329D01* +X115429331Y-81773338D01* +X115485965Y-81858095D01* +X115533348Y-81929008D01* +X115665742Y-82061402D01* +X115730104Y-82104407D01* +X115821411Y-82165418D01* +X115821417Y-82165420D01* +X115821419Y-82165422D01* +X115994399Y-82237073D01* +X116178034Y-82273600D01* +X116178035Y-82273600D01* +X116365265Y-82273600D01* +X116365266Y-82273600D01* +X116548901Y-82237073D01* +X116721881Y-82165422D01* +X116721884Y-82165419D01* +X116721888Y-82165418D01* +X116768454Y-82134303D01* +X116877558Y-82061402D01* +X117009952Y-81929008D01* +X117103486Y-81789025D01* +X117113968Y-81773338D01* +X117113969Y-81773334D01* +X117113972Y-81773331D01* +X117185623Y-81600351D01* +X117222150Y-81416716D01* +X117222150Y-81229484D01* +X117222149Y-81229481D01* +X117861150Y-81229481D01* +X117861150Y-81416718D01* +X117897676Y-81600349D01* +X117969327Y-81773329D01* +X117969331Y-81773338D01* +X118025965Y-81858095D01* +X118073348Y-81929008D01* +X118205742Y-82061402D01* +X118270104Y-82104407D01* +X118361411Y-82165418D01* +X118361417Y-82165420D01* +X118361419Y-82165422D01* +X118534399Y-82237073D01* +X118718034Y-82273600D01* +X118718035Y-82273600D01* +X118905265Y-82273600D01* +X118905266Y-82273600D01* +X119088901Y-82237073D01* +X119261881Y-82165422D01* +X119261884Y-82165419D01* +X119261888Y-82165418D01* +X119308454Y-82134303D01* +X119417558Y-82061402D01* +X119549952Y-81929008D01* +X119643486Y-81789025D01* +X119653968Y-81773338D01* +X119653969Y-81773334D01* +X119653972Y-81773331D01* +X119725623Y-81600351D01* +X119762150Y-81416716D01* +X119762150Y-81229484D01* +X119762149Y-81229481D01* +X120401150Y-81229481D01* +X120401150Y-81416718D01* +X120437676Y-81600349D01* +X120509327Y-81773329D01* +X120509331Y-81773338D01* +X120565965Y-81858095D01* +X120613348Y-81929008D01* +X120745742Y-82061402D01* +X120810104Y-82104407D01* +X120901411Y-82165418D01* +X120901417Y-82165420D01* +X120901419Y-82165422D01* +X121074399Y-82237073D01* +X121258034Y-82273600D01* +X121258035Y-82273600D01* +X121445265Y-82273600D01* +X121445266Y-82273600D01* +X121628901Y-82237073D01* +X121801881Y-82165422D01* +X121801884Y-82165419D01* +X121801888Y-82165418D01* +X121848454Y-82134303D01* +X121957558Y-82061402D01* +X122089952Y-81929008D01* +X122183486Y-81789025D01* +X122193968Y-81773338D01* +X122193969Y-81773334D01* +X122193972Y-81773331D01* +X122265623Y-81600351D01* +X122302150Y-81416716D01* +X122302150Y-81229484D01* +X122302149Y-81229481D01* +X122941150Y-81229481D01* +X122941150Y-81416718D01* +X122977676Y-81600349D01* +X123049327Y-81773329D01* +X123049331Y-81773338D01* +X123105965Y-81858095D01* +X123153348Y-81929008D01* +X123285742Y-82061402D01* +X123350104Y-82104407D01* +X123441411Y-82165418D01* +X123441417Y-82165420D01* +X123441419Y-82165422D01* +X123614399Y-82237073D01* +X123798034Y-82273600D01* +X123798035Y-82273600D01* +X123985265Y-82273600D01* +X123985266Y-82273600D01* +X124168901Y-82237073D01* +X124341881Y-82165422D01* +X124341884Y-82165419D01* +X124341888Y-82165418D01* +X124388454Y-82134303D01* +X124497558Y-82061402D01* +X124629952Y-81929008D01* +X124723486Y-81789025D01* +X124733968Y-81773338D01* +X124733969Y-81773334D01* +X124733972Y-81773331D01* +X124805623Y-81600351D01* +X124842150Y-81416716D01* +X124842150Y-81229484D01* +X124805623Y-81045849D01* +X124733972Y-80872869D01* +X124733970Y-80872867D01* +X124733968Y-80872861D01* +X124656983Y-80757647D01* +X124629952Y-80717192D01* +X124497558Y-80584798D01* +X124443854Y-80548914D01* +X124341888Y-80480781D01* +X124341879Y-80480777D01* +X124168899Y-80409126D01* +X123985268Y-80372600D01* +X123985266Y-80372600D01* +X123798034Y-80372600D01* +X123798031Y-80372600D01* +X123614400Y-80409126D01* +X123441420Y-80480777D01* +X123441411Y-80480781D01* +X123285742Y-80584798D01* +X123285738Y-80584801D01* +X123153351Y-80717188D01* +X123153348Y-80717192D01* +X123049331Y-80872861D01* +X123049327Y-80872870D01* +X122977676Y-81045850D01* +X122941150Y-81229481D01* +X122302149Y-81229481D01* +X122265623Y-81045849D01* +X122193972Y-80872869D01* +X122193970Y-80872867D01* +X122193968Y-80872861D01* +X122116983Y-80757647D01* +X122089952Y-80717192D01* +X121957558Y-80584798D01* +X121903854Y-80548914D01* +X121801888Y-80480781D01* +X121801879Y-80480777D01* +X121628899Y-80409126D01* +X121445268Y-80372600D01* +X121445266Y-80372600D01* +X121258034Y-80372600D01* +X121258031Y-80372600D01* +X121074400Y-80409126D01* +X120901420Y-80480777D01* +X120901411Y-80480781D01* +X120745742Y-80584798D01* +X120745738Y-80584801D01* +X120613351Y-80717188D01* +X120613348Y-80717192D01* +X120509331Y-80872861D01* +X120509327Y-80872870D01* +X120437676Y-81045850D01* +X120401150Y-81229481D01* +X119762149Y-81229481D01* +X119725623Y-81045849D01* +X119653972Y-80872869D01* +X119653970Y-80872867D01* +X119653968Y-80872861D01* +X119576983Y-80757647D01* +X119549952Y-80717192D01* +X119417558Y-80584798D01* +X119363854Y-80548914D01* +X119261888Y-80480781D01* +X119261879Y-80480777D01* +X119088899Y-80409126D01* +X118905268Y-80372600D01* +X118905266Y-80372600D01* +X118718034Y-80372600D01* +X118718031Y-80372600D01* +X118534400Y-80409126D01* +X118361420Y-80480777D01* +X118361411Y-80480781D01* +X118205742Y-80584798D01* +X118205738Y-80584801D01* +X118073351Y-80717188D01* +X118073348Y-80717192D01* +X117969331Y-80872861D01* +X117969327Y-80872870D01* +X117897676Y-81045850D01* +X117861150Y-81229481D01* +X117222149Y-81229481D01* +X117185623Y-81045849D01* +X117113972Y-80872869D01* +X117113970Y-80872867D01* +X117113968Y-80872861D01* +X117036983Y-80757647D01* +X117009952Y-80717192D01* +X116877558Y-80584798D01* +X116823854Y-80548914D01* +X116721888Y-80480781D01* +X116721879Y-80480777D01* +X116548899Y-80409126D01* +X116365268Y-80372600D01* +X116365266Y-80372600D01* +X116178034Y-80372600D01* +X116178031Y-80372600D01* +X115994400Y-80409126D01* +X115821420Y-80480777D01* +X115821411Y-80480781D01* +X115665742Y-80584798D01* +X115665738Y-80584801D01* +X115533351Y-80717188D01* +X115533348Y-80717192D01* +X115429331Y-80872861D01* +X115429327Y-80872870D01* +X115357676Y-81045850D01* +X115321150Y-81229481D01* +X114224203Y-81229481D01* +X114197575Y-81130107D01* +X114164662Y-81073100D01* +X115008259Y-81073100D01* +X115008259Y-81073099D01* +X114999640Y-81018685D01* +X114936406Y-80824072D01* +X114843511Y-80641753D01* +X114723235Y-80476208D01* +X114578541Y-80331514D01* +X114412996Y-80211238D01* +X114230677Y-80118343D01* +X114036064Y-80055109D01* +X113981650Y-80046490D01* +X113981650Y-80890088D01* +X113924643Y-80857175D01* +X113797476Y-80823100D01* +X113665824Y-80823100D01* +X113538657Y-80857175D01* +X113481650Y-80890088D01* +X113481650Y-80046491D01* +X113481649Y-80046490D01* +X113427235Y-80055109D01* +X113232622Y-80118343D01* +X113050303Y-80211238D01* +X112884758Y-80331514D01* +X112740064Y-80476208D01* +X112619788Y-80641753D01* +X112526893Y-80824072D01* +X112463659Y-81018685D01* +X112455040Y-81073099D01* +X112455041Y-81073100D01* +X113298638Y-81073100D01* +X113265725Y-81130107D01* +X113231650Y-81257274D01* +X113231650Y-81388926D01* +X113265725Y-81516093D01* +X113298638Y-81573100D01* +X112455040Y-81573100D01* +X112463659Y-81627514D01* +X112526893Y-81822127D01* +X112619788Y-82004447D01* +X112672363Y-82076809D01* +X112691270Y-82135000D01* +X112672363Y-82193191D01* +X112622863Y-82229155D01* +X112592270Y-82234000D01* +X111863934Y-82234000D01* +X111805743Y-82215093D01* +X111769779Y-82165593D01* +X111769779Y-82104407D01* +X111795707Y-82066429D01* +X111794119Y-82064841D01* +X111861360Y-81997600D01* +X111929952Y-81929008D01* +X112023486Y-81789025D01* +X112033968Y-81773338D01* +X112033969Y-81773334D01* +X112033972Y-81773331D01* +X112105623Y-81600351D01* +X112142150Y-81416716D01* +X112142150Y-81229484D01* +X112105623Y-81045849D01* +X112033972Y-80872869D01* +X112033970Y-80872867D01* +X112033968Y-80872861D01* +X111956983Y-80757647D01* +X111929952Y-80717192D01* +X111797558Y-80584798D01* +X111743854Y-80548914D01* +X111641888Y-80480781D01* +X111641879Y-80480777D01* +X111468899Y-80409126D01* +X111285268Y-80372600D01* +X111285266Y-80372600D01* +X111098034Y-80372600D01* +X111098031Y-80372600D01* +X110914400Y-80409126D01* +X110741420Y-80480777D01* +X110741411Y-80480781D01* +X110585742Y-80584798D01* +X110585738Y-80584801D01* +X110453351Y-80717188D01* +X110453348Y-80717192D01* +X110349331Y-80872861D01* +X110349327Y-80872870D01* +X110277676Y-81045850D01* +X110241150Y-81229481D01* +X110241150Y-81416718D01* +X110277676Y-81600349D01* +X110349327Y-81773329D01* +X110349331Y-81773338D01* +X110405965Y-81858095D01* +X110453348Y-81929008D01* +X110453351Y-81929011D01* +X110589181Y-82064841D01* +X110587387Y-82066634D01* +X110615150Y-82109971D01* +X110611569Y-82171051D01* +X110572769Y-82218361D01* +X110519366Y-82234000D01* +X109323934Y-82234000D01* +X109265743Y-82215093D01* +X109229779Y-82165593D01* +X109229779Y-82104407D01* +X109255707Y-82066429D01* +X109254119Y-82064841D01* +X109321360Y-81997600D01* +X109389952Y-81929008D01* +X109483486Y-81789025D01* +X109493968Y-81773338D01* +X109493969Y-81773334D01* +X109493972Y-81773331D01* +X109565623Y-81600351D01* +X109602150Y-81416716D01* +X109602150Y-81229484D01* +X109565623Y-81045849D01* +X109493972Y-80872869D01* +X109493970Y-80872867D01* +X109493968Y-80872861D01* +X109416983Y-80757647D01* +X109389952Y-80717192D01* +X109257558Y-80584798D01* +X109203854Y-80548914D01* +X109101888Y-80480781D01* +X109101879Y-80480777D01* +X108928899Y-80409126D01* +X108745268Y-80372600D01* +X108745266Y-80372600D01* +X108558034Y-80372600D01* +X108558031Y-80372600D01* +X108374400Y-80409126D01* +X108201420Y-80480777D01* +X108201411Y-80480781D01* +X108045742Y-80584798D01* +X108045738Y-80584801D01* +X107913351Y-80717188D01* +X107913348Y-80717192D01* +X107809331Y-80872861D01* +X107809327Y-80872870D01* +X107737676Y-81045850D01* +X107701150Y-81229481D01* +X107701150Y-81416718D01* +X107737676Y-81600349D01* +X107737677Y-81600351D01* +X107767242Y-81671728D01* +X107787865Y-81721514D01* +X107792666Y-81782511D01* +X107760696Y-81834680D01* +X107704169Y-81858095D01* +X107696401Y-81858400D01* +X107595141Y-81858400D01* +X107525017Y-81877189D01* +X107480559Y-81889102D01* +X107377841Y-81948407D01* +X107293957Y-82032291D01* +X107234652Y-82135009D01* +X107226504Y-82165418D01* +X107203950Y-82249591D01* +X107203950Y-82368209D01* +X107213937Y-82405479D01* +X107234652Y-82482790D01* +X107271840Y-82547200D01* +X107284562Y-82607048D01* +X107259676Y-82662944D01* +X107206688Y-82693537D01* +X107186104Y-82695700D01* +X104885658Y-82695700D01* +X104827467Y-82676793D01* +X104815655Y-82666704D01* +X104420285Y-82271335D01* +X104352992Y-82226372D01* +X104336112Y-82215093D01* +X104272797Y-82172787D01* +X104272794Y-82172785D01* +X104272793Y-82172785D01* +X104181604Y-82135014D01* +X104108919Y-82104906D01* +X104108913Y-82104904D01* +X103934944Y-82070300D01* +X103934942Y-82070300D01* +X103934941Y-82070300D01* +X103701658Y-82070300D01* +X103643467Y-82051393D01* +X103631654Y-82041304D01* +X102921186Y-81330836D01* +X102917370Y-81323348D01* +X102910617Y-81318355D01* +X102903755Y-81296625D01* +X102893409Y-81276319D01* +X102894723Y-81268022D01* +X102892193Y-81260010D01* +X102899415Y-81238394D01* +X102900827Y-81229481D01* +X105161150Y-81229481D01* +X105161150Y-81416718D01* +X105197676Y-81600349D01* +X105269327Y-81773329D01* +X105269331Y-81773338D01* +X105325965Y-81858095D01* +X105373348Y-81929008D01* +X105505742Y-82061402D01* +X105570104Y-82104407D01* +X105661411Y-82165418D01* +X105661417Y-82165420D01* +X105661419Y-82165422D01* +X105834399Y-82237073D01* +X106018034Y-82273600D01* +X106018035Y-82273600D01* +X106205265Y-82273600D01* +X106205266Y-82273600D01* +X106388901Y-82237073D01* +X106561881Y-82165422D01* +X106561884Y-82165419D01* +X106561888Y-82165418D01* +X106608454Y-82134303D01* +X106717558Y-82061402D01* +X106849952Y-81929008D01* +X106943486Y-81789025D01* +X106953968Y-81773338D01* +X106953969Y-81773334D01* +X106953972Y-81773331D01* +X107025623Y-81600351D01* +X107062150Y-81416716D01* +X107062150Y-81229484D01* +X107025623Y-81045849D01* +X106953972Y-80872869D01* +X106953970Y-80872867D01* +X106953968Y-80872861D01* +X106876983Y-80757647D01* +X106849952Y-80717192D01* +X106717558Y-80584798D01* +X106663854Y-80548914D01* +X106561888Y-80480781D01* +X106561879Y-80480777D01* +X106388899Y-80409126D01* +X106205268Y-80372600D01* +X106205266Y-80372600D01* +X106018034Y-80372600D01* +X106018031Y-80372600D01* +X105834400Y-80409126D01* +X105661420Y-80480777D01* +X105661411Y-80480781D01* +X105505742Y-80584798D01* +X105505738Y-80584801D01* +X105373351Y-80717188D01* +X105373348Y-80717192D01* +X105269331Y-80872861D01* +X105269327Y-80872870D01* +X105197676Y-81045850D01* +X105161150Y-81229481D01* +X102900827Y-81229481D01* +X102902980Y-81215887D01* +X102908920Y-81209946D01* +X102911583Y-81201978D01* +X102928225Y-81190641D01* +X102946245Y-81172622D01* +X102961381Y-81166427D01* +X102963464Y-81165769D01* +X103049936Y-81142599D01* +X103152663Y-81083289D01* +X103236539Y-80999413D01* +X103239805Y-80993756D01* +X103295847Y-80896690D01* +X103295847Y-80896688D01* +X103295849Y-80896686D01* +X103326550Y-80782109D01* +X103326550Y-80663491D01* +X103295849Y-80548914D01* +X103295847Y-80548911D01* +X103295847Y-80548909D01* +X103236542Y-80446191D01* +X103236540Y-80446189D01* +X103236539Y-80446187D01* +X103152663Y-80362311D01* +X103152660Y-80362309D01* +X103152658Y-80362307D01* +X103049939Y-80303002D01* +X103049940Y-80303002D01* +X103027085Y-80296878D01* +X102935359Y-80272300D01* +X102816741Y-80272300D01* +X102746617Y-80291089D01* +X102702159Y-80303002D01* +X102599441Y-80362307D01* +X102599440Y-80362308D01* +X102599437Y-80362310D01* +X102599437Y-80362311D01* +X102585251Y-80376496D01* +X102530737Y-80404272D01* +X102470305Y-80394701D01* +X102427040Y-80351436D01* +X102416250Y-80306491D01* +X102416250Y-77091410D01* +X102416249Y-77091406D01* +X102412950Y-77074819D01* +X102381644Y-76917434D01* +X102313764Y-76753555D01* +X102313764Y-76753554D01* +X102215214Y-76606065D01* +X102089784Y-76480635D01* +X101942294Y-76382085D01* +X101778416Y-76314206D01* +X101604443Y-76279600D01* +X101604441Y-76279600D01* +X101427059Y-76279600D01* +X101427056Y-76279600D01* +X101253084Y-76314206D01* +X101253082Y-76314206D01* +X101089205Y-76382085D01* +X101089204Y-76382085D01* +X100941715Y-76480635D01* +X100816285Y-76606065D01* +X100717735Y-76753554D01* +X100717735Y-76753555D01* +X100649856Y-76917432D01* +X100649856Y-76917434D01* +X100615250Y-77091406D01* +X100615250Y-81287594D01* +X100649854Y-81461563D01* +X100649856Y-81461569D01* +X100650991Y-81464310D01* +X100680465Y-81535464D01* +X100717737Y-81625447D01* +X100753250Y-81678595D01* +X100756454Y-81683390D01* +X100805062Y-81756139D01* +X100816286Y-81772936D01* +X102713614Y-83670264D01* +X102772690Y-83709736D01* +X102861103Y-83768813D01* +X102930905Y-83797725D01* +X102935945Y-83800540D01* +X102953001Y-83818946D01* +X102972088Y-83835247D01* +X102973480Y-83841045D01* +X102977533Y-83845419D01* +X102980512Y-83870338D01* +X102986372Y-83894742D01* +X102984129Y-83900584D01* +X102984798Y-83906171D01* +X102975805Y-83922273D01* +X102969191Y-83939508D01* +X102970505Y-83940267D01* +X102907952Y-84048609D01* +X102896446Y-84091550D01* +X102877250Y-84163191D01* +X102877250Y-84281809D01* +X102898030Y-84359361D01* +X102907952Y-84396390D01* +X102967257Y-84499108D01* +X102967259Y-84499110D01* +X102967261Y-84499113D01* +X103051137Y-84582989D01* +X103051139Y-84582990D01* +X103051141Y-84582992D01* +X103153860Y-84642297D01* +X103153861Y-84642297D01* +X103153864Y-84642299D01* +X103268441Y-84673000D01* +X103268443Y-84673000D01* +X103387057Y-84673000D01* +X103387059Y-84673000D01* +X103501636Y-84642299D01* +X103501638Y-84642297D01* +X103501640Y-84642297D01* +X103604358Y-84582992D01* +X103604358Y-84582991D01* +X103604363Y-84582989D01* +X103688239Y-84499113D01* +X103747549Y-84396386D01* +X103757470Y-84359358D01* +X103757838Y-84358791D01* +X103757812Y-84358112D01* +X103774466Y-84333186D01* +X103790792Y-84308046D01* +X103791426Y-84307802D01* +X103791804Y-84307238D01* +X103819916Y-84296865D01* +X103847913Y-84286119D01* +X103848568Y-84286294D01* +X103849208Y-84286059D01* +X103878079Y-84294201D01* +X103907014Y-84301954D01* +X103908029Y-84302622D01* +X103956690Y-84335136D01* +X104045103Y-84394213D01* +X104115536Y-84423387D01* +X104208984Y-84462095D01* +X104382958Y-84496700D01* +X104382959Y-84496700D01* +X109398342Y-84496700D01* +X109456533Y-84515607D01* +X109468346Y-84525696D01* +X117450214Y-92507563D01* +X117450216Y-92507564D01* +X117450218Y-92507566D01* +X117484070Y-92530185D01* +X117521950Y-92578234D01* +X117524352Y-92639373D01* +X117490359Y-92690246D01* +X117432956Y-92711424D01* +X117429069Y-92711500D01* +X116161611Y-92711500D01* +X116106610Y-92694816D01* +X116000676Y-92624034D01* +X115882297Y-92575000D01* +X115882295Y-92574999D01* +X115882294Y-92574999D01* +X115756619Y-92550000D01* +X111786981Y-92550000D01* +X111786980Y-92550000D01* +X111727162Y-92561899D01* +X111661306Y-92574999D01* +X111661305Y-92574999D01* +X111661302Y-92575000D01* +X111542924Y-92624034D01* +X111542916Y-92624038D01* +X111436382Y-92695223D01* +X108169070Y-95962534D01* +X108097883Y-96069075D01* +X108048849Y-96187454D01* +X108048849Y-96187456D01* +X108023851Y-96313128D01* +X108023851Y-96313131D01* +X108023851Y-96441269D01* +X108045339Y-96549300D01* +X108048849Y-96566943D01* +X108048849Y-96566945D01* +X108097883Y-96685324D01* +X108148289Y-96760764D01* +X108169073Y-96791869D01* +X108259681Y-96882477D01* +X108366223Y-96953665D01* +X108484606Y-97002701D01* +X108610281Y-97027699D01* +X108610282Y-97027699D01* +X108738418Y-97027699D01* +X108738419Y-97027699D01* +X108864094Y-97002701D01* +X108982477Y-96953665D01* +X109089019Y-96882477D01* +X112091499Y-93879995D01* +X112146016Y-93852219D01* +X112161503Y-93851000D01* +X113252128Y-93851000D01* +X113310319Y-93869907D01* +X113346283Y-93919407D01* +X113346283Y-93980593D01* +X113310319Y-94030093D01* +X113301628Y-94035736D01* +X113242441Y-94069907D01* +X113158557Y-94153791D01* +X113099252Y-94256509D01* +X113094408Y-94274587D01* +X113068550Y-94371091D01* +X113068550Y-94489709D01* +X113084317Y-94548551D01* +X113099252Y-94604290D01* +X113158557Y-94707008D01* +X113158559Y-94707010D01* +X113158561Y-94707013D01* +X113242437Y-94790889D01* +X113242439Y-94790890D01* +X113242441Y-94790892D01* +X113345160Y-94850197D01* +X113345161Y-94850197D01* +X113345164Y-94850199D01* +X113459741Y-94880900D01* +X113459743Y-94880900D01* +X113578357Y-94880900D01* +X113578359Y-94880900D01* +X113692936Y-94850199D01* +X113692938Y-94850197D01* +X113692940Y-94850197D01* +X113795658Y-94790892D01* +X113795658Y-94790891D01* +X113795663Y-94790889D01* +X113879539Y-94707013D01* +X113888449Y-94691581D01* +X113938847Y-94604290D01* +X113938847Y-94604288D01* +X113938849Y-94604286D01* +X113969550Y-94489709D01* +X113969550Y-94371091D01* +X113938849Y-94256514D01* +X113938847Y-94256511D01* +X113938847Y-94256509D01* +X113879542Y-94153791D01* +X113879540Y-94153789D01* +X113879539Y-94153787D01* +X113795663Y-94069911D01* +X113795660Y-94069909D01* +X113795658Y-94069907D01* +X113736472Y-94035736D01* +X113695531Y-93990267D01* +X113689135Y-93929416D01* +X113719728Y-93876428D01* +X113775624Y-93851542D01* +X113785972Y-93851000D01* +X114157650Y-93851000D01* +X114215841Y-93869907D01* +X114251805Y-93919407D01* +X114251805Y-93980593D01* +X114243386Y-93999500D01* +X114226752Y-94028309D01* +X114212659Y-94080907D01* +X114196050Y-94142891D01* +X114196050Y-94261509D01* +X114216399Y-94337452D01* +X114226752Y-94376090D01* +X114286057Y-94478808D01* +X114286059Y-94478810D01* +X114286061Y-94478813D01* +X114369937Y-94562689D01* +X114369939Y-94562690D01* +X114369941Y-94562692D01* +X114472660Y-94621997D01* +X114472661Y-94621997D01* +X114472664Y-94621999D01* +X114587241Y-94652700D01* +X114587243Y-94652700D01* +X114705857Y-94652700D01* +X114705859Y-94652700D01* +X114820436Y-94621999D01* +X114820438Y-94621997D01* +X114820440Y-94621997D01* +X114923158Y-94562692D01* +X114923158Y-94562691D01* +X114923163Y-94562689D01* +X115007039Y-94478813D01* +X115020790Y-94454996D01* +X115066347Y-94376090D01* +X115066347Y-94376088D01* +X115066349Y-94376086D01* +X115097050Y-94261509D01* +X115097050Y-94142891D01* +X115066349Y-94028314D01* +X115066347Y-94028311D01* +X115066347Y-94028309D01* +X115049714Y-93999500D01* +X115036992Y-93939652D01* +X115061879Y-93883756D01* +X115114867Y-93853163D01* +X115135450Y-93851000D01* +X115384990Y-93851000D01* +X115439990Y-93867683D01* +X115510311Y-93914670D01* +X115545923Y-93938465D01* +X115664306Y-93987501D01* +X115789981Y-94012500D01* +X116384008Y-94012500D01* +X116442199Y-94031407D01* +X116478163Y-94080907D01* +X116478163Y-94142093D01* +X116469744Y-94161000D01* +X116411252Y-94262309D01* +X116400163Y-94303693D01* +X116380550Y-94376891D01* +X116380550Y-94495509D01* +X116401475Y-94573600D01* +X116411252Y-94610090D01* +X116470557Y-94712808D01* +X116470559Y-94712810D01* +X116470561Y-94712813D01* +X116554437Y-94796689D01* +X116554439Y-94796690D01* +X116554441Y-94796692D01* +X116657160Y-94855997D01* +X116657161Y-94855997D01* +X116657164Y-94855999D01* +X116771741Y-94886700D01* +X116771743Y-94886700D01* +X116890357Y-94886700D01* +X116890359Y-94886700D01* +X117004936Y-94855999D01* +X117004938Y-94855997D01* +X117004940Y-94855997D01* +X117107658Y-94796692D01* +X117107658Y-94796691D01* +X117107663Y-94796689D01* +X117191539Y-94712813D01* +X117194891Y-94707008D01* +X117250847Y-94610090D01* +X117250847Y-94610088D01* +X117250849Y-94610086D01* +X117281550Y-94495509D01* +X117281550Y-94376891D01* +X117250849Y-94262314D01* +X117250847Y-94262311D01* +X117250847Y-94262309D01* +X117192356Y-94161000D01* +X117179634Y-94101152D01* +X117204521Y-94045256D01* +X117257509Y-94014663D01* +X117278092Y-94012500D01* +X122232027Y-94012500D01* +X122251340Y-94014402D01* +X122264350Y-94016989D01* +X122297581Y-94023600D01* +X122297587Y-94023600D01* +X122425718Y-94023600D01* +X122425719Y-94023600D01* +X122551394Y-93998601D01* +X122669777Y-93949565D01* +X122776319Y-93878377D01* +X122866927Y-93787769D01* +X122880900Y-93773796D01* +X122935417Y-93746019D01* +X122950904Y-93744800D01* +X123556682Y-93744800D01* +X123614873Y-93763707D01* +X123650837Y-93813207D01* +X123650837Y-93874393D01* +X123626687Y-93913801D01* +X123164403Y-94376086D01* +X122706920Y-94833569D01* +X122652403Y-94861346D01* +X122636916Y-94862565D01* +X118501150Y-94862565D01* +X118442959Y-94843658D01* +X118406995Y-94794158D01* +X118402150Y-94763565D01* +X118402150Y-94743792D01* +X118396551Y-94722897D01* +X118371449Y-94629214D01* +X118371447Y-94629211D01* +X118371447Y-94629209D01* +X118312142Y-94526491D01* +X118312140Y-94526489D01* +X118312139Y-94526487D01* +X118228263Y-94442611D01* +X118228260Y-94442609D01* +X118228258Y-94442607D01* +X118125539Y-94383302D01* +X118125540Y-94383302D01* +X118101617Y-94376892D01* +X118010959Y-94352600D01* +X117892341Y-94352600D01* +X117855734Y-94362409D01* +X117777759Y-94383302D01* +X117675041Y-94442607D01* +X117591157Y-94526491D01* +X117531852Y-94629209D01* +X117501150Y-94743792D01* +X117501150Y-94858330D01* +X117482243Y-94916521D01* +X117472154Y-94928334D01* +X112386885Y-100013604D01* +X112332368Y-100041381D01* +X112316881Y-100042600D01* +X111016418Y-100042600D01* +X110958227Y-100023693D01* +X110946414Y-100013604D01* +X106321146Y-95388335D01* +X106293369Y-95333818D01* +X106292150Y-95318331D01* +X106292150Y-91853271D01* +X106254014Y-91761203D01* +X106183547Y-91690735D01* +X106183547Y-91690736D01* +X105807202Y-91314391D01* +X112606250Y-91314391D01* +X112606250Y-91433009D01* +X112633324Y-91534051D01* +X112636952Y-91547590D01* +X112696257Y-91650308D01* +X112696259Y-91650310D01* +X112696261Y-91650313D01* +X112780137Y-91734189D01* +X112780139Y-91734190D01* +X112780141Y-91734192D01* +X112882860Y-91793497D01* +X112882861Y-91793497D01* +X112882864Y-91793499D01* +X112997441Y-91824200D01* +X112997443Y-91824200D01* +X113116057Y-91824200D01* +X113116059Y-91824200D01* +X113230636Y-91793499D01* +X113230638Y-91793497D01* +X113230640Y-91793497D01* +X113333358Y-91734192D01* +X113333358Y-91734191D01* +X113333363Y-91734189D01* +X113417239Y-91650313D01* +X113436544Y-91616876D01* +X113476547Y-91547590D01* +X113476547Y-91547588D01* +X113476549Y-91547586D01* +X113507250Y-91433009D01* +X113507250Y-91314391D01* +X113476549Y-91199814D01* +X113476547Y-91199811D01* +X113476547Y-91199809D01* +X113417242Y-91097091D01* +X113417240Y-91097089D01* +X113417239Y-91097087D01* +X113333363Y-91013211D01* +X113333360Y-91013209D01* +X113333358Y-91013207D01* +X113230639Y-90953902D01* +X113230640Y-90953902D01* +X113192166Y-90943593D01* +X113116059Y-90923200D01* +X112997441Y-90923200D01* +X112927317Y-90941989D01* +X112882859Y-90953902D01* +X112780141Y-91013207D01* +X112696257Y-91097091D01* +X112636952Y-91199809D01* +X112631806Y-91219016D01* +X112606250Y-91314391D01* +X105807202Y-91314391D01* +X98761702Y-84268891D01* +X99910650Y-84268891D01* +X99910650Y-84387509D01* +X99930639Y-84462107D01* +X99941352Y-84502090D01* +X100000657Y-84604808D01* +X100000659Y-84604810D01* +X100000661Y-84604813D01* +X100084537Y-84688689D01* +X100084539Y-84688690D01* +X100084541Y-84688692D01* +X100187260Y-84747997D01* +X100187261Y-84747997D01* +X100187264Y-84747999D01* +X100301841Y-84778700D01* +X100301843Y-84778700D01* +X100420457Y-84778700D01* +X100420459Y-84778700D01* +X100535036Y-84747999D01* +X100535038Y-84747997D01* +X100535040Y-84747997D01* +X100637758Y-84688692D01* +X100637758Y-84688691D01* +X100637763Y-84688689D01* +X100721639Y-84604813D01* +X100721642Y-84604808D01* +X100780947Y-84502090D01* +X100780947Y-84502088D01* +X100780949Y-84502086D01* +X100811650Y-84387509D01* +X100811650Y-84268891D01* +X100780949Y-84154314D01* +X100780947Y-84154311D01* +X100780947Y-84154309D01* +X100721642Y-84051591D01* +X100721640Y-84051589D01* +X100721639Y-84051587D01* +X100637763Y-83967711D01* +X100637760Y-83967709D01* +X100637758Y-83967707D01* +X100535039Y-83908402D01* +X100535040Y-83908402D01* +X100521501Y-83904774D01* +X100420459Y-83877700D01* +X100301841Y-83877700D01* +X100238240Y-83894742D01* +X100187259Y-83908402D01* +X100084541Y-83967707D01* +X100000657Y-84051591D01* +X99941352Y-84154309D01* +X99941351Y-84154314D01* +X99910650Y-84268891D01* +X98761702Y-84268891D01* +X97902433Y-83409622D01* +X97874656Y-83355105D01* +X97884227Y-83294673D01* +X97927492Y-83251408D01* +X97946803Y-83243995D01* +X98025536Y-83222899D01* +X98128263Y-83163589D01* +X98212139Y-83079713D01* +X98212142Y-83079708D01* +X98271447Y-82976990D01* +X98271447Y-82976988D01* +X98271449Y-82976986D01* +X98302150Y-82862409D01* +X98302150Y-82743791D01* +X98271449Y-82629214D01* +X98271447Y-82629211D01* +X98271447Y-82629209D01* +X98212142Y-82526491D01* +X98212140Y-82526489D01* +X98212139Y-82526487D01* +X98128263Y-82442611D01* +X98128260Y-82442609D01* +X98128258Y-82442607D01* +X98025539Y-82383302D01* +X98025540Y-82383302D01* +X98012001Y-82379674D01* +X97910959Y-82352600D01* +X97792341Y-82352600D01* +X97734088Y-82368209D01* +X97677759Y-82383302D01* +X97575041Y-82442607D01* +X97491157Y-82526491D01* +X97431852Y-82629209D01* +X97410758Y-82707935D01* +X97377433Y-82759250D01* +X97320312Y-82781176D01* +X97261211Y-82765340D01* +X97245127Y-82752316D01* +X93104602Y-78611791D01* +X96182150Y-78611791D01* +X96182150Y-78730409D01* +X96207280Y-78824196D01* +X96212852Y-78844990D01* +X96272157Y-78947708D01* +X96272159Y-78947710D01* +X96272161Y-78947713D01* +X96356037Y-79031589D01* +X96356039Y-79031590D01* +X96356041Y-79031592D01* +X96458760Y-79090897D01* +X96458761Y-79090897D01* +X96458764Y-79090899D01* +X96573341Y-79121600D01* +X96573343Y-79121600D01* +X96691957Y-79121600D01* +X96691959Y-79121600D01* +X96806536Y-79090899D01* +X96806538Y-79090897D01* +X96806540Y-79090897D01* +X96909258Y-79031592D01* +X96909258Y-79031591D01* +X96909263Y-79031589D01* +X96993139Y-78947713D01* +X97052449Y-78844986D01* +X97083150Y-78730409D01* +X97083150Y-78611791D01* +X97052449Y-78497214D01* +X97052447Y-78497211D01* +X97052447Y-78497209D01* +X96993142Y-78394491D01* +X96993140Y-78394489D01* +X96993139Y-78394487D01* +X96909263Y-78310611D01* +X96909260Y-78310609D01* +X96909258Y-78310607D01* +X96806539Y-78251302D01* +X96806540Y-78251302D01* +X96793001Y-78247674D01* +X96691959Y-78220600D01* +X96573341Y-78220600D01* +X96503217Y-78239389D01* +X96458759Y-78251302D01* +X96356041Y-78310607D01* +X96272157Y-78394491D01* +X96212852Y-78497209D01* +X96206799Y-78519800D01* +X96182150Y-78611791D01* +X93104602Y-78611791D01* +X92502802Y-78009991D01* +X97707650Y-78009991D01* +X97707650Y-78128609D01* +X97732299Y-78220600D01* +X97738352Y-78243190D01* +X97797657Y-78345908D01* +X97797659Y-78345910D01* +X97797661Y-78345913D01* +X97881537Y-78429789D01* +X97881539Y-78429790D01* +X97881541Y-78429792D01* +X97984260Y-78489097D01* +X97984261Y-78489097D01* +X97984264Y-78489099D01* +X98098841Y-78519800D01* +X98098843Y-78519800D01* +X98217457Y-78519800D01* +X98217459Y-78519800D01* +X98332036Y-78489099D01* +X98332038Y-78489097D01* +X98332040Y-78489097D01* +X98434758Y-78429792D01* +X98434758Y-78429791D01* +X98434763Y-78429789D01* +X98518639Y-78345913D01* +X98546950Y-78296878D01* +X98577947Y-78243190D01* +X98577947Y-78243188D01* +X98577949Y-78243186D01* +X98608650Y-78128609D01* +X98608650Y-78009991D01* +X98577949Y-77895414D01* +X98577947Y-77895411D01* +X98577947Y-77895409D01* +X98518642Y-77792691D01* +X98518640Y-77792689D01* +X98518639Y-77792687D01* +X98434763Y-77708811D01* +X98434760Y-77708809D01* +X98434758Y-77708807D01* +X98332039Y-77649502D01* +X98332040Y-77649502D01* +X98318501Y-77645874D01* +X98217459Y-77618800D01* +X98098841Y-77618800D01* +X98028717Y-77637589D01* +X97984259Y-77649502D01* +X97881541Y-77708807D01* +X97797657Y-77792691D01* +X97738352Y-77895409D01* +X97738351Y-77895414D01* +X97707650Y-78009991D01* +X92502802Y-78009991D01* +X88165914Y-73673103D01* +X88138137Y-73618586D01* +X88147708Y-73558154D01* +X88165914Y-73533095D01* +X89811905Y-71887104D01* +X91483545Y-70215464D01* +X91483547Y-70215464D01* +X91554014Y-70144997D01* +X91592150Y-70052928D01* +X91592150Y-67921057D01* +X91611057Y-67862866D01* +X91660557Y-67826902D01* +X91721743Y-67826902D01* +X91771243Y-67862866D01* +X91776886Y-67871557D01* +X91838057Y-67977508D01* +X91838059Y-67977510D01* +X91838061Y-67977513D01* +X91921937Y-68061389D01* +X91921939Y-68061390D01* +X91921941Y-68061392D01* +X92024660Y-68120697D01* +X92024661Y-68120697D01* +X92024664Y-68120699D01* +X92139241Y-68151400D01* +X92139243Y-68151400D01* +X92257857Y-68151400D01* +X92257859Y-68151400D01* +X92372436Y-68120699D01* +X92372438Y-68120697D01* +X92372440Y-68120697D01* +X92475158Y-68061392D01* +X92475158Y-68061391D01* +X92475163Y-68061389D01* +X92556157Y-67980394D01* +X92610672Y-67952619D01* +X92626159Y-67951400D01* +X94605331Y-67951400D01* +X94663522Y-67970307D01* +X94699486Y-68019807D01* +X94699486Y-68080993D01* +X94675335Y-68120404D01* +X93975234Y-68820504D01* +X93920717Y-68848281D01* +X93905230Y-68849500D01* +X93790691Y-68849500D01* +X93720567Y-68868289D01* +X93676109Y-68880202D01* +X93573391Y-68939507D01* +X93489507Y-69023391D01* +X93430202Y-69126109D01* +X93430201Y-69126114D01* +X93399500Y-69240691D01* +X93399500Y-69359309D01* +X93411606Y-69404489D01* +X93430202Y-69473890D01* +X93489507Y-69576608D01* +X93489509Y-69576610D01* +X93489511Y-69576613D01* +X93573387Y-69660489D01* +X93573389Y-69660490D01* +X93573391Y-69660492D01* +X93676110Y-69719797D01* +X93676111Y-69719797D01* +X93676114Y-69719799D01* +X93790691Y-69750500D01* +X93790693Y-69750500D01* +X93909307Y-69750500D01* +X93909309Y-69750500D01* +X94023886Y-69719799D01* +X94023888Y-69719797D01* +X94023890Y-69719797D01* +X94126608Y-69660492D01* +X94126608Y-69660491D01* +X94126613Y-69660489D01* +X94210489Y-69576613D01* +X94210492Y-69576608D01* +X94269797Y-69473890D01* +X94269797Y-69473888D01* +X94269799Y-69473886D01* +X94300500Y-69359309D01* +X94300500Y-69244768D01* +X94319407Y-69186577D01* +X94329496Y-69174764D01* +X95074764Y-68429496D01* +X95129281Y-68401719D01* +X95144768Y-68400500D01* +X109752679Y-68400500D01* +X109810735Y-68376451D01* +X109844747Y-68362364D01* +X121185245Y-57021864D01* +X121185247Y-57021864D01* +X121255714Y-56951397D01* +X121293850Y-56859328D01* +X121293850Y-56688345D01* +X121312757Y-56630154D01* +X121362257Y-56594190D01* +X121423443Y-56594190D01* +X121472943Y-56630154D01* +X121484314Y-56650460D01* +X121545017Y-56797013D01* +X121572558Y-56838231D01* +X121654511Y-56960882D01* +X121793868Y-57100239D01* +X121957736Y-57209732D01* +X122139815Y-57285151D01* +X122333109Y-57323600D01* +X122333110Y-57323600D01* +X122530190Y-57323600D01* +X122530191Y-57323600D01* +X122723485Y-57285151D01* +X122905564Y-57209732D01* +X123069432Y-57100239D01* +X123208789Y-56960882D01* +X123318282Y-56797014D01* +X123393701Y-56614935D01* +X123432150Y-56421641D01* +X123432150Y-56224559D01* +X123393701Y-56031265D01* +X123326473Y-55868963D01* +X123321673Y-55807968D01* +X123347935Y-55761075D01* +X123681815Y-55427196D01* +X123736331Y-55399419D01* +X123751818Y-55398200D01* +X124242621Y-55398200D01* +X124300812Y-55417107D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X127076641Y-94916107D02* +G01* +X127112605Y-94965607D01* +X127112605Y-95026793D01* +X127104186Y-95045700D01* +X127087552Y-95074509D01* +X127070387Y-95138569D01* +X127056850Y-95189091D01* +X127056850Y-95307709D01* +X127087136Y-95420736D01* +X127087552Y-95422288D01* +X127104244Y-95451199D01* +X127116966Y-95511048D01* +X127092080Y-95566943D01* +X127039092Y-95597536D01* +X127018508Y-95599700D01* +X126792221Y-95599700D01* +X126700153Y-95637835D01* +X126629685Y-95708302D01* +X126629686Y-95708303D01* +X126069085Y-96268904D01* +X126014568Y-96296681D01* +X125999081Y-96297900D01* +X125312698Y-96297900D01* +X125254507Y-96278993D01* +X125218543Y-96229493D01* +X125218543Y-96168307D01* +X125226962Y-96149400D01* +X125251447Y-96106990D01* +X125251447Y-96106988D01* +X125251449Y-96106986D01* +X125282150Y-95992409D01* +X125282150Y-95975400D01* +X125301057Y-95917209D01* +X125350557Y-95881245D01* +X125381150Y-95876400D01* +X125414579Y-95876400D01* +X125472635Y-95852351D01* +X125506647Y-95838264D01* +X126418714Y-94926195D01* +X126473231Y-94898419D01* +X126488718Y-94897200D01* +X127018450Y-94897200D01* +X127076641Y-94916107D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X135125572Y-75754707D02* +G01* +X135161536Y-75804207D01* +X135161536Y-75865393D01* +X135137385Y-75904804D01* +X130022818Y-81019370D01* +X129968301Y-81047147D01* +X129907869Y-81037576D01* +X129864604Y-80994311D01* +X129861357Y-80987268D01* +X129827034Y-80904403D01* +X129813974Y-80872873D01* +X129813968Y-80872861D01* +X129736983Y-80757647D01* +X129709952Y-80717192D01* +X129577558Y-80584798D01* +X129523854Y-80548914D01* +X129421888Y-80480781D01* +X129421879Y-80480777D01* +X129248899Y-80409126D01* +X129065268Y-80372600D01* +X129065266Y-80372600D01* +X128878034Y-80372600D01* +X128878031Y-80372600D01* +X128694400Y-80409126D01* +X128521420Y-80480777D01* +X128521411Y-80480781D01* +X128365742Y-80584798D01* +X128365738Y-80584801D01* +X128233351Y-80717188D01* +X128233348Y-80717192D01* +X128129331Y-80872861D01* +X128129327Y-80872870D01* +X128106514Y-80927946D01* +X128066777Y-80974472D01* +X128007282Y-80988755D01* +X127950754Y-80965340D01* +X127918785Y-80913171D01* +X127916050Y-80890060D01* +X127916050Y-75855169D01* +X127918518Y-75847571D01* +X127917269Y-75839682D01* +X127927793Y-75819026D01* +X127934957Y-75796978D01* +X127945046Y-75785165D01* +X127965415Y-75764796D01* +X128019932Y-75737019D01* +X128035419Y-75735800D01* +X135067381Y-75735800D01* +X135125572Y-75754707D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X180033472Y-62620507D02* +G01* +X180069436Y-62670007D01* +X180069436Y-62731193D01* +X180045285Y-62770604D01* +X170528585Y-72287304D01* +X170474068Y-72315081D01* +X170458581Y-72316300D01* +X121378121Y-72316300D01* +X121286053Y-72354435D01* +X120453672Y-73186814D01* +X120399156Y-73214591D01* +X120345784Y-73208274D01* +X120183485Y-73141049D01* +X119990193Y-73102600D01* +X119990191Y-73102600D01* +X119793109Y-73102600D01* +X119793106Y-73102600D01* +X119599815Y-73141049D01* +X119599813Y-73141049D01* +X119434915Y-73209351D01* +X119373918Y-73214151D01* +X119321749Y-73182182D01* +X119298335Y-73125654D01* +X119312619Y-73066159D01* +X119327018Y-73047892D01* +X123390219Y-68984691D01* +X147210750Y-68984691D01* +X147210750Y-69103309D01* +X147233062Y-69186577D01* +X147241452Y-69217890D01* +X147300757Y-69320608D01* +X147300759Y-69320610D01* +X147300761Y-69320613D01* +X147384637Y-69404489D01* +X147384639Y-69404490D01* +X147384641Y-69404492D01* +X147487360Y-69463797D01* +X147487361Y-69463797D01* +X147487364Y-69463799D01* +X147601941Y-69494500D01* +X147601943Y-69494500D01* +X147720557Y-69494500D01* +X147720559Y-69494500D01* +X147835136Y-69463799D01* +X147835138Y-69463797D01* +X147835140Y-69463797D01* +X147937858Y-69404492D01* +X147937858Y-69404491D01* +X147937863Y-69404489D01* +X148021739Y-69320613D01* +X148067882Y-69240692D01* +X148081047Y-69217890D01* +X148081047Y-69217888D01* +X148081049Y-69217886D01* +X148111750Y-69103309D01* +X148111750Y-68984691D01* +X148081049Y-68870114D01* +X148081047Y-68870111D01* +X148081047Y-68870109D01* +X148021742Y-68767391D01* +X148021740Y-68767389D01* +X148021739Y-68767387D01* +X147937863Y-68683511D01* +X147937860Y-68683509D01* +X147937858Y-68683507D01* +X147835139Y-68624202D01* +X147835140Y-68624202D01* +X147821601Y-68620574D01* +X147720559Y-68593500D01* +X147601941Y-68593500D01* +X147531817Y-68612289D01* +X147487359Y-68624202D01* +X147384641Y-68683507D01* +X147300757Y-68767391D01* +X147241452Y-68870109D01* +X147241451Y-68870114D01* +X147210750Y-68984691D01* +X123390219Y-68984691D01* +X126836720Y-65538191D01* +X169380450Y-65538191D01* +X169380450Y-65656809D01* +X169407079Y-65756191D01* +X169411152Y-65771390D01* +X169470457Y-65874108D01* +X169470459Y-65874110D01* +X169470461Y-65874113D01* +X169554337Y-65957989D01* +X169554339Y-65957990D01* +X169554341Y-65957992D01* +X169657060Y-66017297D01* +X169657061Y-66017297D01* +X169657064Y-66017299D01* +X169771641Y-66048000D01* +X169771643Y-66048000D01* +X169890257Y-66048000D01* +X169890259Y-66048000D01* +X170004836Y-66017299D01* +X170004838Y-66017297D01* +X170004840Y-66017297D01* +X170107558Y-65957992D01* +X170107558Y-65957991D01* +X170107563Y-65957989D01* +X170191439Y-65874113D01* +X170218720Y-65826861D01* +X170250747Y-65771390D01* +X170250747Y-65771388D01* +X170250749Y-65771386D01* +X170281450Y-65656809D01* +X170281450Y-65538191D01* +X170250749Y-65423614D01* +X170250747Y-65423611D01* +X170250747Y-65423609D01* +X170191442Y-65320891D01* +X170191440Y-65320889D01* +X170191439Y-65320887D01* +X170107563Y-65237011D01* +X170107560Y-65237009D01* +X170107558Y-65237007D01* +X170004839Y-65177702D01* +X170004840Y-65177702D01* +X169991301Y-65174074D01* +X169890259Y-65147000D01* +X169771641Y-65147000D01* +X169701517Y-65165789D01* +X169657059Y-65177702D01* +X169554341Y-65237007D01* +X169470457Y-65320891D01* +X169411152Y-65423609D01* +X169400946Y-65461698D01* +X169380450Y-65538191D01* +X126836720Y-65538191D01* +X127460720Y-64914191D01* +X163725350Y-64914191D01* +X163725350Y-65032809D01* +X163727707Y-65041604D01* +X163756052Y-65147390D01* +X163815357Y-65250108D01* +X163815359Y-65250110D01* +X163815361Y-65250113D01* +X163899237Y-65333989D01* +X163899239Y-65333990D01* +X163899241Y-65333992D01* +X164001960Y-65393297D01* +X164001961Y-65393297D01* +X164001964Y-65393299D01* +X164116541Y-65424000D01* +X164116543Y-65424000D01* +X164235157Y-65424000D01* +X164235159Y-65424000D01* +X164349736Y-65393299D01* +X164349738Y-65393297D01* +X164349740Y-65393297D01* +X164452458Y-65333992D01* +X164452458Y-65333991D01* +X164452463Y-65333989D01* +X164536339Y-65250113D01* +X164578146Y-65177702D01* +X164595647Y-65147390D01* +X164595647Y-65147388D01* +X164595649Y-65147386D01* +X164626350Y-65032809D01* +X164626350Y-64914191D01* +X164595649Y-64799614D01* +X164595647Y-64799611D01* +X164595647Y-64799609D01* +X164536342Y-64696891D01* +X164536340Y-64696889D01* +X164536339Y-64696887D01* +X164452463Y-64613011D01* +X164452460Y-64613009D01* +X164452458Y-64613007D01* +X164349739Y-64553702D01* +X164349740Y-64553702D01* +X164336201Y-64550074D01* +X164235159Y-64523000D01* +X164116541Y-64523000D01* +X164046417Y-64541789D01* +X164001959Y-64553702D01* +X163899241Y-64613007D01* +X163815357Y-64696891D01* +X163756052Y-64799609D01* +X163756051Y-64799614D01* +X163725350Y-64914191D01* +X127460720Y-64914191D01* +X128234220Y-64140691D01* +X153149500Y-64140691D01* +X153149500Y-64259309D01* +X153173935Y-64350500D01* +X153180202Y-64373890D01* +X153239507Y-64476608D01* +X153239509Y-64476610D01* +X153239511Y-64476613D01* +X153323387Y-64560489D01* +X153323389Y-64560490D01* +X153323391Y-64560492D01* +X153426110Y-64619797D01* +X153426111Y-64619797D01* +X153426114Y-64619799D01* +X153540691Y-64650500D01* +X153540693Y-64650500D01* +X153659307Y-64650500D01* +X153659309Y-64650500D01* +X153773886Y-64619799D01* +X153773888Y-64619797D01* +X153773890Y-64619797D01* +X153876608Y-64560492D01* +X153876608Y-64560491D01* +X153876613Y-64560489D01* +X153960489Y-64476613D01* +X154019799Y-64373886D01* +X154050500Y-64259309D01* +X154050500Y-64140691D01* +X154019799Y-64026114D01* +X154019797Y-64026111D01* +X154019797Y-64026109D01* +X153960492Y-63923391D01* +X153960490Y-63923389D01* +X153960489Y-63923387D01* +X153877793Y-63840691D01* +X156349500Y-63840691D01* +X156349500Y-63959309D01* +X156376574Y-64060351D01* +X156380202Y-64073890D01* +X156439507Y-64176608D01* +X156439509Y-64176610D01* +X156439511Y-64176613D01* +X156523387Y-64260489D01* +X156523389Y-64260490D01* +X156523391Y-64260492D01* +X156626110Y-64319797D01* +X156626111Y-64319797D01* +X156626114Y-64319799D01* +X156740691Y-64350500D01* +X156740693Y-64350500D01* +X156859307Y-64350500D01* +X156859309Y-64350500D01* +X156973886Y-64319799D01* +X156973888Y-64319797D01* +X156973890Y-64319797D01* +X157076608Y-64260492D01* +X157076608Y-64260491D01* +X157076613Y-64260489D01* +X157160489Y-64176613D01* +X157219799Y-64073886D01* +X157250500Y-63959309D01* +X157250500Y-63840691D01* +X157229895Y-63763791D01* +X166233650Y-63763791D01* +X166233650Y-63882409D01* +X166260724Y-63983451D01* +X166264352Y-63996990D01* +X166323657Y-64099708D01* +X166323659Y-64099710D01* +X166323661Y-64099713D01* +X166407537Y-64183589D01* +X166407539Y-64183590D01* +X166407541Y-64183592D01* +X166510260Y-64242897D01* +X166510261Y-64242897D01* +X166510264Y-64242899D01* +X166624841Y-64273600D01* +X166624843Y-64273600D01* +X166743457Y-64273600D01* +X166743459Y-64273600D01* +X166858036Y-64242899D01* +X166858038Y-64242897D01* +X166858040Y-64242897D01* +X166960758Y-64183592D01* +X166960758Y-64183591D01* +X166960763Y-64183589D01* +X167044639Y-64099713D01* +X167059548Y-64073890D01* +X167103947Y-63996990D01* +X167103947Y-63996988D01* +X167103949Y-63996986D01* +X167134650Y-63882409D01* +X167134650Y-63763791D01* +X167103949Y-63649214D01* +X167103947Y-63649211D01* +X167103947Y-63649209D01* +X167044642Y-63546491D01* +X167044640Y-63546489D01* +X167044639Y-63546487D01* +X166960763Y-63462611D01* +X166960760Y-63462609D01* +X166960758Y-63462607D01* +X166858039Y-63403302D01* +X166858040Y-63403302D01* +X166844501Y-63399674D01* +X166743459Y-63372600D01* +X166624841Y-63372600D01* +X166554717Y-63391389D01* +X166510259Y-63403302D01* +X166407541Y-63462607D01* +X166323657Y-63546491D01* +X166264352Y-63649209D01* +X166264217Y-63649713D01* +X166233650Y-63763791D01* +X157229895Y-63763791D01* +X157219799Y-63726114D01* +X157219797Y-63726111D01* +X157219797Y-63726109D01* +X157160492Y-63623391D01* +X157160490Y-63623389D01* +X157160489Y-63623387D01* +X157076613Y-63539511D01* +X157076610Y-63539509D01* +X157076608Y-63539507D01* +X156973889Y-63480202D01* +X156973890Y-63480202D01* +X156946743Y-63472928D01* +X156859309Y-63449500D01* +X156740691Y-63449500D01* +X156670567Y-63468289D01* +X156626109Y-63480202D01* +X156523391Y-63539507D01* +X156439507Y-63623391D01* +X156380202Y-63726109D01* +X156370105Y-63763791D01* +X156349500Y-63840691D01* +X153877793Y-63840691D01* +X153876613Y-63839511D01* +X153876610Y-63839509D01* +X153876608Y-63839507D01* +X153773889Y-63780202D01* +X153773890Y-63780202D01* +X153760351Y-63776574D01* +X153659309Y-63749500D01* +X153540691Y-63749500D01* +X153487357Y-63763791D01* +X153426109Y-63780202D01* +X153323391Y-63839507D01* +X153239507Y-63923391D01* +X153180202Y-64026109D01* +X153180201Y-64026114D01* +X153149500Y-64140691D01* +X128234220Y-64140691D01* +X129061120Y-63313791D01* +X154299500Y-63313791D01* +X154299500Y-63432409D01* +X154304080Y-63449500D01* +X154330202Y-63546990D01* +X154389507Y-63649708D01* +X154389509Y-63649710D01* +X154389511Y-63649713D01* +X154473387Y-63733589D01* +X154473389Y-63733590D01* +X154473391Y-63733592D01* +X154576110Y-63792897D01* +X154576111Y-63792897D01* +X154576114Y-63792899D01* +X154690691Y-63823600D01* +X154690693Y-63823600D01* +X154809307Y-63823600D01* +X154809309Y-63823600D01* +X154923886Y-63792899D01* +X154923888Y-63792897D01* +X154923890Y-63792897D01* +X155000837Y-63748471D01* +X155000846Y-63748466D01* +X155007982Y-63744345D01* +X155026613Y-63733589D01* +X155110489Y-63649713D01* +X155125686Y-63623391D01* +X155169797Y-63546990D01* +X155169797Y-63546988D01* +X155169799Y-63546986D01* +X155200500Y-63432409D01* +X155200500Y-63313791D01* +X155169799Y-63199214D01* +X155169797Y-63199211D01* +X155169797Y-63199209D01* +X155110492Y-63096491D01* +X155110490Y-63096489D01* +X155110489Y-63096487D01* +X155026613Y-63012611D01* +X155026610Y-63012609D01* +X155026608Y-63012607D01* +X154923889Y-62953302D01* +X154923890Y-62953302D01* +X154910351Y-62949674D01* +X154809309Y-62922600D01* +X154690691Y-62922600D01* +X154620567Y-62941389D01* +X154576109Y-62953302D01* +X154473391Y-63012607D01* +X154389507Y-63096491D01* +X154330202Y-63199209D01* +X154330201Y-63199214D01* +X154299500Y-63313791D01* +X129061120Y-63313791D01* +X129744315Y-62630596D01* +X129798832Y-62602819D01* +X129814319Y-62601600D01* +X179975281Y-62601600D01* +X180033472Y-62620507D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X214650341Y-40842507D02* +G01* +X214686305Y-40892007D01* +X214691150Y-40922600D01* +X214691150Y-139623616D01* +X214672243Y-139681807D01* +X214622743Y-139717771D01* +X214591973Y-139722616D01* +X80960373Y-139483276D01* +X80902216Y-139464264D01* +X80866341Y-139414700D01* +X80861550Y-139384376D01* +X80861170Y-139008128D01* +X80859853Y-137705043D01* +X197691650Y-137705043D01* +X197691650Y-137941156D01* +X197728584Y-138174352D01* +X197728585Y-138174356D01* +X197801542Y-138398893D01* +X197801544Y-138398896D01* +X197908734Y-138609269D01* +X197968989Y-138692205D01* +X198667861Y-137993332D01* +X198679132Y-138035392D01* +X198751540Y-138160808D01* +X198853942Y-138263210D01* +X198979358Y-138335618D01* +X199021415Y-138346887D01* +X198322543Y-139045759D01* +X198405475Y-139106013D01* +X198405479Y-139106015D01* +X198615853Y-139213205D01* +X198615856Y-139213207D01* +X198840393Y-139286164D01* +X198840397Y-139286165D01* +X199073594Y-139323100D01* +X199309706Y-139323100D01* +X199542902Y-139286165D01* +X199542906Y-139286164D01* +X199767443Y-139213207D01* +X199767446Y-139213205D01* +X199977820Y-139106015D01* +X199977826Y-139106011D01* +X200060755Y-139045759D01* +X200060755Y-139045758D01* +X199361884Y-138346887D01* +X199403942Y-138335618D01* +X199529358Y-138263210D01* +X199631760Y-138160808D01* +X199704168Y-138035392D01* +X199715437Y-137993334D01* +X200414308Y-138692205D01* +X200414309Y-138692205D01* +X200474561Y-138609276D01* +X200474565Y-138609270D01* +X200581755Y-138398896D01* +X200581757Y-138398893D01* +X200654714Y-138174356D01* +X200654715Y-138174352D01* +X200691650Y-137941156D01* +X200691650Y-137705043D01* +X204191650Y-137705043D01* +X204191650Y-137941156D01* +X204228584Y-138174352D01* +X204228585Y-138174356D01* +X204301542Y-138398893D01* +X204301544Y-138398896D01* +X204408734Y-138609269D01* +X204468989Y-138692205D01* +X205167861Y-137993332D01* +X205179132Y-138035392D01* +X205251540Y-138160808D01* +X205353942Y-138263210D01* +X205479358Y-138335618D01* +X205521415Y-138346887D01* +X204822543Y-139045759D01* +X204905475Y-139106013D01* +X204905479Y-139106015D01* +X205115853Y-139213205D01* +X205115856Y-139213207D01* +X205340393Y-139286164D01* +X205340397Y-139286165D01* +X205573594Y-139323100D01* +X205809706Y-139323100D01* +X206042902Y-139286165D01* +X206042906Y-139286164D01* +X206267443Y-139213207D01* +X206267446Y-139213205D01* +X206477820Y-139106015D01* +X206477826Y-139106011D01* +X206560755Y-139045759D01* +X206560755Y-139045758D01* +X205861884Y-138346887D01* +X205903942Y-138335618D01* +X206029358Y-138263210D01* +X206131760Y-138160808D01* +X206204168Y-138035392D01* +X206215437Y-137993334D01* +X206914308Y-138692205D01* +X206914309Y-138692205D01* +X206974561Y-138609276D01* +X206974565Y-138609270D01* +X207081755Y-138398896D01* +X207081757Y-138398893D01* +X207154714Y-138174356D01* +X207154715Y-138174352D01* +X207191650Y-137941156D01* +X207191650Y-137705043D01* +X207154715Y-137471847D01* +X207154714Y-137471843D01* +X207081757Y-137247306D01* +X207081755Y-137247303D01* +X206974565Y-137036929D01* +X206974563Y-137036925D01* +X206914309Y-136953993D01* +X206215437Y-137652865D01* +X206204168Y-137610808D01* +X206131760Y-137485392D01* +X206029358Y-137382990D01* +X205903942Y-137310582D01* +X205861882Y-137299311D01* +X206560755Y-136600439D01* +X206477819Y-136540184D01* +X206267446Y-136432994D01* +X206267443Y-136432992D01* +X206042906Y-136360035D01* +X206042902Y-136360034D01* +X205809706Y-136323100D01* +X205573594Y-136323100D01* +X205340397Y-136360034D01* +X205340393Y-136360035D01* +X205115856Y-136432992D01* +X205115853Y-136432994D01* +X204905473Y-136540188D01* +X204822543Y-136600439D01* +X205521416Y-137299312D01* +X205479358Y-137310582D01* +X205353942Y-137382990D01* +X205251540Y-137485392D01* +X205179132Y-137610808D01* +X205167862Y-137652866D01* +X204468989Y-136953993D01* +X204408738Y-137036923D01* +X204301544Y-137247303D01* +X204301542Y-137247306D01* +X204228585Y-137471843D01* +X204228584Y-137471847D01* +X204191650Y-137705043D01* +X200691650Y-137705043D01* +X200654715Y-137471847D01* +X200654714Y-137471843D01* +X200581757Y-137247306D01* +X200581755Y-137247303D01* +X200474565Y-137036929D01* +X200474563Y-137036925D01* +X200414309Y-136953993D01* +X199715437Y-137652865D01* +X199704168Y-137610808D01* +X199631760Y-137485392D01* +X199529358Y-137382990D01* +X199403942Y-137310582D01* +X199361882Y-137299311D01* +X200060755Y-136600439D01* +X199977819Y-136540184D01* +X199767446Y-136432994D01* +X199767443Y-136432992D01* +X199542906Y-136360035D01* +X199542902Y-136360034D01* +X199309706Y-136323100D01* +X199073594Y-136323100D01* +X198840397Y-136360034D01* +X198840393Y-136360035D01* +X198615856Y-136432992D01* +X198615853Y-136432994D01* +X198405473Y-136540188D01* +X198322543Y-136600439D01* +X199021416Y-137299312D01* +X198979358Y-137310582D01* +X198853942Y-137382990D01* +X198751540Y-137485392D01* +X198679132Y-137610808D01* +X198667862Y-137652866D01* +X197968989Y-136953993D01* +X197908738Y-137036923D01* +X197801544Y-137247303D01* +X197801542Y-137247306D01* +X197728585Y-137471843D01* +X197728584Y-137471847D01* +X197691650Y-137705043D01* +X80859853Y-137705043D01* +X80859849Y-137701257D01* +X80858736Y-136600439D01* +X80857322Y-135201810D01* +X83341150Y-135201810D01* +X83341150Y-135444389D01* +X83372811Y-135684881D01* +X83372811Y-135684886D01* +X83435594Y-135919192D01* +X83435598Y-135919205D01* +X83528422Y-136143304D01* +X83528424Y-136143308D01* +X83528426Y-136143312D01* +X83632227Y-136323100D01* +X83649716Y-136353392D01* +X83797379Y-136545831D01* +X83797381Y-136545833D01* +X83797385Y-136545838D01* +X83968912Y-136717365D01* +X83968916Y-136717368D01* +X83968918Y-136717370D01* +X84161357Y-136865033D01* +X84161361Y-136865036D01* +X84371438Y-136986324D01* +X84595550Y-137079154D01* +X84829861Y-137141938D01* +X85070362Y-137173600D01* +X85070363Y-137173600D01* +X85312937Y-137173600D01* +X85312938Y-137173600D01* +X85553439Y-137141938D01* +X85787750Y-137079154D01* +X86011862Y-136986324D01* +X86221939Y-136865036D01* +X86414388Y-136717365D01* +X86585915Y-136545838D01* +X86733586Y-136353389D01* +X86854874Y-136143312D01* +X86947704Y-135919200D01* +X87010488Y-135684889D01* +X87029472Y-135540691D01* +X141449500Y-135540691D01* +X141449500Y-135659309D01* +X141476574Y-135760351D01* +X141480202Y-135773890D01* +X141539507Y-135876608D01* +X141539509Y-135876610D01* +X141539511Y-135876613D01* +X141623387Y-135960489D01* +X141623389Y-135960490D01* +X141623391Y-135960492D01* +X141726110Y-136019797D01* +X141726111Y-136019797D01* +X141726114Y-136019799D01* +X141840691Y-136050500D01* +X141840693Y-136050500D01* +X141959307Y-136050500D01* +X141959309Y-136050500D01* +X142073886Y-136019799D01* +X142073888Y-136019797D01* +X142073890Y-136019797D01* +X142176608Y-135960492D01* +X142176608Y-135960491D01* +X142176613Y-135960489D01* +X142260489Y-135876613D01* +X142319799Y-135773886D01* +X142350500Y-135659309D01* +X142350500Y-135540691D01* +X142319799Y-135426114D01* +X142319797Y-135426111D01* +X142319797Y-135426109D01* +X142260492Y-135323391D01* +X142260490Y-135323389D01* +X142260489Y-135323387D01* +X142176613Y-135239511D01* +X142176610Y-135239509D01* +X142176608Y-135239507D01* +X142073889Y-135180202D01* +X142073890Y-135180202D01* +X142060351Y-135176574D01* +X141959309Y-135149500D01* +X141840691Y-135149500D01* +X141774149Y-135167330D01* +X141726109Y-135180202D01* +X141623391Y-135239507D01* +X141539507Y-135323391D01* +X141480202Y-135426109D01* +X141475304Y-135444388D01* +X141449500Y-135540691D01* +X87029472Y-135540691D01* +X87042150Y-135444388D01* +X87042150Y-135201812D01* +X87010488Y-134961311D01* +X86947704Y-134727000D01* +X86854874Y-134502888D01* +X86733586Y-134292811D01* +X86585915Y-134100362D01* +X86414388Y-133928835D01* +X86414383Y-133928831D01* +X86414381Y-133928829D01* +X86221942Y-133781166D01* +X86193490Y-133764739D01* +X86011862Y-133659876D01* +X86011858Y-133659874D01* +X86011854Y-133659872D01* +X85787755Y-133567048D01* +X85787754Y-133567047D01* +X85787750Y-133567046D01* +X85553439Y-133504262D01* +X85553436Y-133504261D01* +X85553434Y-133504261D01* +X85312939Y-133472600D01* +X85312938Y-133472600D01* +X85070362Y-133472600D01* +X85070360Y-133472600D01* +X84829868Y-133504261D01* +X84829863Y-133504261D01* +X84595557Y-133567044D01* +X84595544Y-133567048D01* +X84371445Y-133659872D01* +X84161357Y-133781166D01* +X83968918Y-133928829D01* +X83797379Y-134100368D01* +X83649716Y-134292807D01* +X83528422Y-134502895D01* +X83435598Y-134726994D01* +X83435594Y-134727007D01* +X83372811Y-134961313D01* +X83372811Y-134961318D01* +X83341150Y-135201810D01* +X80857322Y-135201810D01* +X80855391Y-133291430D01* +X158875000Y-133291430D01* +X158875000Y-133534999D01* +X158875001Y-133535000D01* +X159525000Y-133535000D01* +X159525000Y-134035000D01* +X158875001Y-134035000D01* +X158875000Y-134035001D01* +X158875000Y-134278569D01* +X158911508Y-134462104D01* +X158911508Y-134462106D01* +X158983118Y-134634989D01* +X158983124Y-134635001D01* +X159087087Y-134790589D01* +X159087090Y-134790593D01* +X159219406Y-134922909D01* +X159219410Y-134922912D01* +X159374998Y-135026875D01* +X159375010Y-135026881D01* +X159547888Y-135098489D01* +X159547899Y-135098492D01* +X159575000Y-135103882D01* +X159575000Y-134351988D01* +X159584940Y-134369205D01* +X159640795Y-134425060D01* +X159709204Y-134464556D01* +X159785504Y-134485000D01* +X159864496Y-134485000D01* +X159940796Y-134464556D01* +X160009205Y-134425060D01* +X160065060Y-134369205D01* +X160075000Y-134351988D01* +X160075000Y-135103881D01* +X160102100Y-135098492D01* +X160102111Y-135098489D01* +X160274989Y-135026881D01* +X160275001Y-135026875D01* +X160430589Y-134922912D01* +X160430593Y-134922909D01* +X160562909Y-134790593D01* +X160562912Y-134790589D01* +X160666875Y-134635001D01* +X160666881Y-134634989D01* +X160738491Y-134462106D01* +X160738491Y-134462104D01* +X160774999Y-134278569D01* +X160775000Y-134278565D01* +X160775000Y-134035001D01* +X160774999Y-134035000D01* +X160125000Y-134035000D01* +X160125000Y-133535000D01* +X160774999Y-133535000D01* +X160775000Y-133534999D01* +X160775000Y-133291434D01* +X160774999Y-133291430D01* +X167525000Y-133291430D01* +X167525000Y-133534999D01* +X167525001Y-133535000D01* +X168175000Y-133535000D01* +X168175000Y-134035000D01* +X167525001Y-134035000D01* +X167525000Y-134035001D01* +X167525000Y-134278569D01* +X167561508Y-134462104D01* +X167561508Y-134462106D01* +X167633118Y-134634989D01* +X167633124Y-134635001D01* +X167737087Y-134790589D01* +X167737090Y-134790593D01* +X167869406Y-134922909D01* +X167869410Y-134922912D01* +X168024998Y-135026875D01* +X168025010Y-135026881D01* +X168197888Y-135098489D01* +X168197899Y-135098492D01* +X168225000Y-135103882D01* +X168225000Y-134351988D01* +X168234940Y-134369205D01* +X168290795Y-134425060D01* +X168359204Y-134464556D01* +X168435504Y-134485000D01* +X168514496Y-134485000D01* +X168590796Y-134464556D01* +X168659205Y-134425060D01* +X168715060Y-134369205D01* +X168725000Y-134351988D01* +X168725000Y-135103881D01* +X168752100Y-135098492D01* +X168752111Y-135098489D01* +X168924989Y-135026881D01* +X168925001Y-135026875D01* +X169080589Y-134922912D01* +X169080593Y-134922909D01* +X169212909Y-134790593D01* +X169212912Y-134790589D01* +X169316875Y-134635001D01* +X169316881Y-134634989D01* +X169388491Y-134462106D01* +X169388491Y-134462104D01* +X169424999Y-134278569D01* +X169425000Y-134278565D01* +X169425000Y-134035001D01* +X169424999Y-134035000D01* +X168775000Y-134035000D01* +X168775000Y-133535000D01* +X169424999Y-133535000D01* +X169425000Y-133534999D01* +X169425000Y-133291434D01* +X169424999Y-133291430D01* +X169388491Y-133107895D01* +X169388491Y-133107893D01* +X169316881Y-132935010D01* +X169316875Y-132934998D01* +X169221788Y-132792693D01* +X169212912Y-132779410D01* +X169212909Y-132779406D01* +X169175081Y-132741578D01* +X171241150Y-132741578D01* +X171241150Y-134904621D01* +X171241151Y-134904623D01* +X171256002Y-134998399D01* +X171256004Y-134998404D01* +X171313600Y-135111442D01* +X171403308Y-135201150D01* +X171516346Y-135258746D01* +X171610131Y-135273600D01* +X173773168Y-135273599D01* +X173773171Y-135273599D01* +X173773172Y-135273598D01* +X173820061Y-135266172D01* +X173866949Y-135258747D01* +X173866949Y-135258746D01* +X173866954Y-135258746D01* +X173979992Y-135201150D01* +X174069700Y-135111442D01* +X174127296Y-134998404D01* +X174142150Y-134904619D01* +X174142149Y-133705121D01* +X175891650Y-133705121D01* +X175891650Y-133941078D01* +X175922448Y-134175008D01* +X175922448Y-134175013D01* +X175983517Y-134402924D01* +X175983521Y-134402937D01* +X176073813Y-134620924D01* +X176073815Y-134620929D01* +X176191792Y-134825269D01* +X176254370Y-134906824D01* +X177090607Y-134070586D01* +X177115628Y-134130990D01* +X177186762Y-134237451D01* +X177277299Y-134327988D01* +X177383760Y-134399122D01* +X177444160Y-134424141D01* +X176607924Y-135260378D01* +X176607923Y-135260378D01* +X176689480Y-135322957D01* +X176893820Y-135440934D01* +X176893825Y-135440936D01* +X177111812Y-135531228D01* +X177111825Y-135531232D01* +X177339738Y-135592301D01* +X177573671Y-135623099D01* +X177573673Y-135623100D01* +X177809627Y-135623100D01* +X177809628Y-135623099D01* +X178043558Y-135592301D01* +X178043563Y-135592301D01* +X178271474Y-135531232D01* +X178271487Y-135531228D01* +X178489474Y-135440936D01* +X178489479Y-135440934D01* +X178693815Y-135322960D01* +X178775374Y-135260378D01* +X177939137Y-134424141D01* +X177999540Y-134399122D01* +X178106001Y-134327988D01* +X178196538Y-134237451D01* +X178267672Y-134130990D01* +X178292691Y-134070587D01* +X179128928Y-134906824D01* +X179191510Y-134825265D01* +X179309484Y-134620929D01* +X179309486Y-134620924D01* +X179399778Y-134402937D01* +X179399782Y-134402924D01* +X179460851Y-134175013D01* +X179460851Y-134175008D01* +X179491649Y-133941078D01* +X179491650Y-133941077D01* +X179491650Y-133708939D01* +X181241150Y-133708939D01* +X181241150Y-133937260D01* +X181276864Y-134162755D01* +X181347419Y-134379899D01* +X181451070Y-134583327D01* +X181451074Y-134583333D01* +X181585266Y-134768031D01* +X181585268Y-134768033D01* +X181585271Y-134768037D01* +X181746713Y-134929479D01* +X181746716Y-134929481D01* +X181746718Y-134929483D01* +X181790528Y-134961313D01* +X181931422Y-135063679D01* +X182134851Y-135167331D01* +X182351990Y-135237884D01* +X182351991Y-135237884D01* +X182351994Y-135237885D01* +X182577490Y-135273600D01* +X182577493Y-135273600D01* +X182805810Y-135273600D01* +X183031305Y-135237885D01* +X183031306Y-135237884D01* +X183031310Y-135237884D01* +X183248449Y-135167331D01* +X183451878Y-135063679D01* +X183636587Y-134929479D01* +X183798029Y-134768037D01* +X183932229Y-134583328D01* +X184035881Y-134379899D01* +X184106434Y-134162760D01* +X184126669Y-134035000D01* +X184142150Y-133937260D01* +X184142150Y-133708939D01* +X186241150Y-133708939D01* +X186241150Y-133937260D01* +X186276864Y-134162755D01* +X186347419Y-134379899D01* +X186451070Y-134583327D01* +X186451074Y-134583333D01* +X186585266Y-134768031D01* +X186585268Y-134768033D01* +X186585271Y-134768037D01* +X186746713Y-134929479D01* +X186746716Y-134929481D01* +X186746718Y-134929483D01* +X186790528Y-134961313D01* +X186931422Y-135063679D01* +X187134851Y-135167331D01* +X187351990Y-135237884D01* +X187351991Y-135237884D01* +X187351994Y-135237885D01* +X187577490Y-135273600D01* +X187577493Y-135273600D01* +X187805810Y-135273600D01* +X188031305Y-135237885D01* +X188031306Y-135237884D01* +X188031310Y-135237884D01* +X188248449Y-135167331D01* +X188451878Y-135063679D01* +X188636587Y-134929479D01* +X188798029Y-134768037D01* +X188932229Y-134583328D01* +X189035881Y-134379899D01* +X189106434Y-134162760D01* +X189126669Y-134035000D01* +X189142150Y-133937260D01* +X189142150Y-133708939D01* +X191241150Y-133708939D01* +X191241150Y-133937260D01* +X191276864Y-134162755D01* +X191347419Y-134379899D01* +X191451070Y-134583327D01* +X191451074Y-134583333D01* +X191585266Y-134768031D01* +X191585268Y-134768033D01* +X191585271Y-134768037D01* +X191746713Y-134929479D01* +X191746716Y-134929481D01* +X191746718Y-134929483D01* +X191790528Y-134961313D01* +X191931422Y-135063679D01* +X192134851Y-135167331D01* +X192351990Y-135237884D01* +X192351991Y-135237884D01* +X192351994Y-135237885D01* +X192577490Y-135273600D01* +X192577493Y-135273600D01* +X192805810Y-135273600D01* +X193031305Y-135237885D01* +X193031306Y-135237884D01* +X193031310Y-135237884D01* +X193142334Y-135201810D01* +X209341150Y-135201810D01* +X209341150Y-135444389D01* +X209372811Y-135684881D01* +X209372811Y-135684886D01* +X209435594Y-135919192D01* +X209435598Y-135919205D01* +X209528422Y-136143304D01* +X209528424Y-136143308D01* +X209528426Y-136143312D01* +X209632227Y-136323100D01* +X209649716Y-136353392D01* +X209797379Y-136545831D01* +X209797381Y-136545833D01* +X209797385Y-136545838D01* +X209968912Y-136717365D01* +X209968916Y-136717368D01* +X209968918Y-136717370D01* +X210161357Y-136865033D01* +X210161361Y-136865036D01* +X210371438Y-136986324D01* +X210595550Y-137079154D01* +X210829861Y-137141938D01* +X211070362Y-137173600D01* +X211070363Y-137173600D01* +X211312937Y-137173600D01* +X211312938Y-137173600D01* +X211553439Y-137141938D01* +X211787750Y-137079154D01* +X212011862Y-136986324D01* +X212221939Y-136865036D01* +X212414388Y-136717365D01* +X212585915Y-136545838D01* +X212733586Y-136353389D01* +X212854874Y-136143312D01* +X212947704Y-135919200D01* +X213010488Y-135684889D01* +X213042150Y-135444388D01* +X213042150Y-135201812D01* +X213010488Y-134961311D01* +X212947704Y-134727000D01* +X212854874Y-134502888D01* +X212733586Y-134292811D01* +X212585915Y-134100362D01* +X212414388Y-133928835D01* +X212414383Y-133928831D01* +X212414381Y-133928829D01* +X212221942Y-133781166D01* +X212193490Y-133764739D01* +X212011862Y-133659876D01* +X212011858Y-133659874D01* +X212011854Y-133659872D01* +X211787755Y-133567048D01* +X211787754Y-133567047D01* +X211787750Y-133567046D01* +X211553439Y-133504262D01* +X211553436Y-133504261D01* +X211553434Y-133504261D01* +X211312939Y-133472600D01* +X211312938Y-133472600D01* +X211070362Y-133472600D01* +X211070360Y-133472600D01* +X210829868Y-133504261D01* +X210829863Y-133504261D01* +X210595557Y-133567044D01* +X210595544Y-133567048D01* +X210371445Y-133659872D01* +X210161357Y-133781166D01* +X209968918Y-133928829D01* +X209797379Y-134100368D01* +X209649716Y-134292807D01* +X209528422Y-134502895D01* +X209435598Y-134726994D01* +X209435594Y-134727007D01* +X209372811Y-134961313D01* +X209372811Y-134961318D01* +X209341150Y-135201810D01* +X193142334Y-135201810D01* +X193248449Y-135167331D01* +X193451878Y-135063679D01* +X193636587Y-134929479D01* +X193798029Y-134768037D01* +X193932229Y-134583328D01* +X194035881Y-134379899D01* +X194106434Y-134162760D01* +X194126669Y-134035000D01* +X194142150Y-133937260D01* +X194142150Y-133708939D01* +X194106435Y-133483444D01* +X194082165Y-133408749D01* +X194035881Y-133266301D01* +X194018684Y-133232550D01* +X198041150Y-133232550D01* +X198041150Y-133413649D01* +X198069478Y-133592506D01* +X198123600Y-133759081D01* +X198125439Y-133764739D01* +X198207654Y-133926094D01* +X198314097Y-134072601D01* +X198442149Y-134200653D01* +X198588656Y-134307096D01* +X198750011Y-134389311D01* +X198922241Y-134445271D01* +X198993786Y-134456602D01* +X199101101Y-134473600D01* +X199101104Y-134473600D01* +X199282199Y-134473600D01* +X199371627Y-134459435D01* +X199461059Y-134445271D01* +X199633289Y-134389311D01* +X199794644Y-134307096D01* +X199941151Y-134200653D01* +X200069203Y-134072601D01* +X200175646Y-133926094D01* +X200257861Y-133764739D01* +X200297738Y-133642007D01* +X200333702Y-133592508D01* +X200391892Y-133573600D01* +X204491407Y-133573600D01* +X204549598Y-133592507D01* +X204585562Y-133642007D01* +X204585562Y-133642008D01* +X204623600Y-133759081D01* +X204625439Y-133764739D01* +X204707654Y-133926094D01* +X204814097Y-134072601D01* +X204942149Y-134200653D01* +X205088656Y-134307096D01* +X205250011Y-134389311D01* +X205422241Y-134445271D01* +X205493786Y-134456602D01* +X205601101Y-134473600D01* +X205601104Y-134473600D01* +X205782199Y-134473600D01* +X205871627Y-134459435D01* +X205961059Y-134445271D01* +X206133289Y-134389311D01* +X206294644Y-134307096D01* +X206441151Y-134200653D01* +X206569203Y-134072601D01* +X206675646Y-133926094D01* +X206757861Y-133764739D01* +X206813821Y-133592509D01* +X206842150Y-133413646D01* +X206842150Y-133232554D01* +X206842150Y-133232550D01* +X206813821Y-133053693D01* +X206813821Y-133053692D01* +X206813821Y-133053691D01* +X206757861Y-132881461D01* +X206675646Y-132720106D01* +X206569203Y-132573599D01* +X206441151Y-132445547D01* +X206294644Y-132339104D01* +X206294643Y-132339103D01* +X206294641Y-132339102D01* +X206133287Y-132256888D01* +X205961056Y-132200928D01* +X205782199Y-132172600D01* +X205782196Y-132172600D01* +X205601104Y-132172600D01* +X205601101Y-132172600D01* +X205422243Y-132200928D01* +X205250012Y-132256888D01* +X205088658Y-132339102D01* +X205042552Y-132372600D01* +X204942149Y-132445547D01* +X204814097Y-132573599D01* +X204807616Y-132582520D01* +X204707652Y-132720108D01* +X204625438Y-132881462D01* +X204585562Y-133004192D01* +X204549598Y-133053692D01* +X204491408Y-133072600D01* +X200391893Y-133072600D01* +X200333702Y-133053693D01* +X200297738Y-133004193D01* +X200297738Y-133004192D01* +X200257861Y-132881462D01* +X200257861Y-132881461D01* +X200175646Y-132720106D01* +X200069203Y-132573599D01* +X199941151Y-132445547D01* +X199794644Y-132339104D01* +X199794643Y-132339103D01* +X199794641Y-132339102D01* +X199633287Y-132256888D01* +X199461056Y-132200928D01* +X199282199Y-132172600D01* +X199282196Y-132172600D01* +X199101104Y-132172600D01* +X199101101Y-132172600D01* +X198922243Y-132200928D01* +X198750012Y-132256888D01* +X198588658Y-132339102D01* +X198542552Y-132372600D01* +X198442149Y-132445547D01* +X198314097Y-132573599D01* +X198307616Y-132582520D01* +X198207652Y-132720108D01* +X198125438Y-132881462D01* +X198069478Y-133053693D01* +X198041150Y-133232550D01* +X194018684Y-133232550D01* +X193932229Y-133062872D01* +X193925560Y-133053693D01* +X193798033Y-132878168D01* +X193798031Y-132878166D01* +X193798029Y-132878163D01* +X193636587Y-132716721D01* +X193636583Y-132716718D01* +X193636581Y-132716716D01* +X193451883Y-132582524D01* +X193451877Y-132582520D01* +X193248449Y-132478869D01* +X193031305Y-132408314D01* +X192805810Y-132372600D01* +X192805807Y-132372600D01* +X192577493Y-132372600D01* +X192577490Y-132372600D01* +X192351994Y-132408314D01* +X192134850Y-132478869D01* +X191931422Y-132582520D01* +X191931416Y-132582524D01* +X191746718Y-132716716D01* +X191585266Y-132878168D01* +X191451074Y-133062866D01* +X191451070Y-133062872D01* +X191347419Y-133266300D01* +X191276864Y-133483444D01* +X191241150Y-133708939D01* +X189142150Y-133708939D01* +X189106435Y-133483444D01* +X189082165Y-133408749D01* +X189035881Y-133266301D01* +X188932229Y-133062872D01* +X188925560Y-133053693D01* +X188798033Y-132878168D01* +X188798031Y-132878166D01* +X188798029Y-132878163D01* +X188636587Y-132716721D01* +X188636583Y-132716718D01* +X188636581Y-132716716D01* +X188451883Y-132582524D01* +X188451877Y-132582520D01* +X188248449Y-132478869D01* +X188031305Y-132408314D01* +X187805810Y-132372600D01* +X187805807Y-132372600D01* +X187577493Y-132372600D01* +X187577490Y-132372600D01* +X187351994Y-132408314D01* +X187134850Y-132478869D01* +X186931422Y-132582520D01* +X186931416Y-132582524D01* +X186746718Y-132716716D01* +X186585266Y-132878168D01* +X186451074Y-133062866D01* +X186451070Y-133062872D01* +X186347419Y-133266300D01* +X186276864Y-133483444D01* +X186241150Y-133708939D01* +X184142150Y-133708939D01* +X184106435Y-133483444D01* +X184082165Y-133408749D01* +X184035881Y-133266301D01* +X183932229Y-133062872D01* +X183925560Y-133053693D01* +X183798033Y-132878168D01* +X183798031Y-132878166D01* +X183798029Y-132878163D01* +X183636587Y-132716721D01* +X183636583Y-132716718D01* +X183636581Y-132716716D01* +X183451883Y-132582524D01* +X183451877Y-132582520D01* +X183248449Y-132478869D01* +X183031305Y-132408314D01* +X182805810Y-132372600D01* +X182805807Y-132372600D01* +X182577493Y-132372600D01* +X182577490Y-132372600D01* +X182351994Y-132408314D01* +X182134850Y-132478869D01* +X181931422Y-132582520D01* +X181931416Y-132582524D01* +X181746718Y-132716716D01* +X181585266Y-132878168D01* +X181451074Y-133062866D01* +X181451070Y-133062872D01* +X181347419Y-133266300D01* +X181276864Y-133483444D01* +X181241150Y-133708939D01* +X179491650Y-133708939D01* +X179491650Y-133705123D01* +X179491649Y-133705121D01* +X179460851Y-133471191D01* +X179460851Y-133471186D01* +X179399782Y-133243275D01* +X179399778Y-133243262D01* +X179309486Y-133025275D01* +X179309484Y-133025270D01* +X179191507Y-132820930D01* +X179128928Y-132739374D01* +X178292691Y-133575610D01* +X178267672Y-133515210D01* +X178196538Y-133408749D01* +X178106001Y-133318212D01* +X177999540Y-133247078D01* +X177939136Y-133222057D01* +X178775374Y-132385820D01* +X178775375Y-132385820D01* +X178693819Y-132323242D01* +X178489479Y-132205265D01* +X178489474Y-132205263D01* +X178271487Y-132114971D01* +X178271474Y-132114967D01* +X178043561Y-132053898D01* +X177809628Y-132023100D01* +X177573671Y-132023100D01* +X177339741Y-132053898D01* +X177339736Y-132053898D01* +X177111825Y-132114967D01* +X177111812Y-132114971D01* +X176893825Y-132205263D01* +X176893820Y-132205265D01* +X176689481Y-132323241D01* +X176607924Y-132385820D01* +X177444162Y-133222058D01* +X177383760Y-133247078D01* +X177277299Y-133318212D01* +X177186762Y-133408749D01* +X177115628Y-133515210D01* +X177090608Y-133575612D01* +X176254370Y-132739374D01* +X176191791Y-132820931D01* +X176073815Y-133025270D01* +X176073813Y-133025275D01* +X175983521Y-133243262D01* +X175983517Y-133243275D01* +X175922448Y-133471186D01* +X175922448Y-133471191D01* +X175891650Y-133705121D01* +X174142149Y-133705121D01* +X174142149Y-132741582D01* +X174142149Y-132741581D01* +X174142149Y-132741578D01* +X174142148Y-132741576D01* +X174127297Y-132647800D01* +X174127296Y-132647798D01* +X174127296Y-132647796D01* +X174069700Y-132534758D01* +X173979992Y-132445050D01* +X173866954Y-132387454D01* +X173866955Y-132387454D01* +X173773171Y-132372600D01* +X171610128Y-132372600D01* +X171610126Y-132372601D01* +X171516350Y-132387452D01* +X171516345Y-132387454D01* +X171403309Y-132445049D01* +X171313599Y-132534759D01* +X171256004Y-132647795D01* +X171241150Y-132741578D01* +X169175081Y-132741578D01* +X169080593Y-132647090D01* +X169080589Y-132647087D01* +X168925001Y-132543124D01* +X168924992Y-132543120D01* +X168752105Y-132471508D01* +X168725000Y-132466116D01* +X168725000Y-133218011D01* +X168715060Y-133200795D01* +X168659205Y-133144940D01* +X168590796Y-133105444D01* +X168514496Y-133085000D01* +X168435504Y-133085000D01* +X168359204Y-133105444D01* +X168290795Y-133144940D01* +X168234940Y-133200795D01* +X168225000Y-133218011D01* +X168225000Y-132466116D01* +X168197894Y-132471508D01* +X168025007Y-132543120D01* +X168024998Y-132543124D01* +X167869410Y-132647087D01* +X167869406Y-132647090D01* +X167737090Y-132779406D01* +X167737087Y-132779410D01* +X167633124Y-132934998D01* +X167633118Y-132935010D01* +X167561508Y-133107893D01* +X167561508Y-133107895D01* +X167525000Y-133291430D01* +X160774999Y-133291430D01* +X160738491Y-133107895D01* +X160738491Y-133107893D01* +X160666881Y-132935010D01* +X160666875Y-132934998D01* +X160562912Y-132779410D01* +X160562909Y-132779406D01* +X160430593Y-132647090D01* +X160430589Y-132647087D01* +X160275001Y-132543124D01* +X160274992Y-132543120D01* +X160102105Y-132471508D01* +X160075000Y-132466116D01* +X160075000Y-133218011D01* +X160065060Y-133200795D01* +X160009205Y-133144940D01* +X159940796Y-133105444D01* +X159864496Y-133085000D01* +X159785504Y-133085000D01* +X159709204Y-133105444D01* +X159640795Y-133144940D01* +X159584940Y-133200795D01* +X159575000Y-133218011D01* +X159575000Y-132466116D01* +X159547894Y-132471508D01* +X159375007Y-132543120D01* +X159374998Y-132543124D01* +X159219410Y-132647087D01* +X159219406Y-132647090D01* +X159087090Y-132779406D01* +X159087087Y-132779410D01* +X158983124Y-132934998D01* +X158983118Y-132935010D01* +X158911508Y-133107893D01* +X158911508Y-133107895D01* +X158875000Y-133291430D01* +X80855391Y-133291430D01* +X80850819Y-128768272D01* +X114301150Y-128768272D01* +X114301150Y-130397927D01* +X114309882Y-130441820D01* +X114309884Y-130441824D01* +X114327167Y-130467690D01* +X114343146Y-130491604D01* +X114392928Y-130524867D01* +X114403977Y-130527064D01* +X114436822Y-130533599D01* +X114436828Y-130533599D01* +X114436830Y-130533600D01* +X114436831Y-130533600D01* +X116066469Y-130533600D01* +X116066470Y-130533600D01* +X116066471Y-130533599D01* +X116066477Y-130533599D01* +X116088273Y-130529262D01* +X116110372Y-130524867D01* +X116160154Y-130491604D01* +X116193417Y-130441822D01* +X116202150Y-130397920D01* +X116202150Y-129489481D01* +X116841150Y-129489481D01* +X116841150Y-129676718D01* +X116877676Y-129860349D01* +X116949327Y-130033329D01* +X116949331Y-130033338D01* +X117023715Y-130144659D01* +X117053348Y-130189008D01* +X117185742Y-130321402D01* +X117252113Y-130365749D01* +X117341411Y-130425418D01* +X117341417Y-130425420D01* +X117341419Y-130425422D01* +X117514399Y-130497073D01* +X117698034Y-130533600D01* +X117698035Y-130533600D01* +X117885265Y-130533600D01* +X117885266Y-130533600D01* +X118068901Y-130497073D01* +X118241881Y-130425422D01* +X118241884Y-130425419D01* +X118241888Y-130425418D01* +X118286837Y-130395382D01* +X118397558Y-130321402D01* +X118529952Y-130189008D01* +X118623486Y-130049025D01* +X118633968Y-130033338D01* +X118633969Y-130033334D01* +X118633972Y-130033331D01* +X118705623Y-129860351D01* +X118742150Y-129676716D01* +X118742150Y-129489484D01* +X118742149Y-129489481D01* +X119381150Y-129489481D01* +X119381150Y-129676718D01* +X119417676Y-129860349D01* +X119489327Y-130033329D01* +X119489331Y-130033338D01* +X119563715Y-130144659D01* +X119593348Y-130189008D01* +X119725742Y-130321402D01* +X119792113Y-130365749D01* +X119881411Y-130425418D01* +X119881417Y-130425420D01* +X119881419Y-130425422D01* +X120054399Y-130497073D01* +X120238034Y-130533600D01* +X120238035Y-130533600D01* +X120425265Y-130533600D01* +X120425266Y-130533600D01* +X120608901Y-130497073D01* +X120781881Y-130425422D01* +X120781884Y-130425419D01* +X120781888Y-130425418D01* +X120826837Y-130395382D01* +X120937558Y-130321402D01* +X121069952Y-130189008D01* +X121163486Y-130049025D01* +X121173968Y-130033338D01* +X121173969Y-130033334D01* +X121173972Y-130033331D01* +X121245623Y-129860351D01* +X121282150Y-129676716D01* +X121282150Y-129489484D01* +X121282149Y-129489481D01* +X121921150Y-129489481D01* +X121921150Y-129676718D01* +X121957676Y-129860349D01* +X122029327Y-130033329D01* +X122029331Y-130033338D01* +X122103715Y-130144659D01* +X122133348Y-130189008D01* +X122265742Y-130321402D01* +X122332113Y-130365749D01* +X122421411Y-130425418D01* +X122421417Y-130425420D01* +X122421419Y-130425422D01* +X122594399Y-130497073D01* +X122778034Y-130533600D01* +X122778035Y-130533600D01* +X122965265Y-130533600D01* +X122965266Y-130533600D01* +X123148901Y-130497073D01* +X123321881Y-130425422D01* +X123321884Y-130425419D01* +X123321888Y-130425418D01* +X123366837Y-130395382D01* +X123477558Y-130321402D01* +X123609952Y-130189008D01* +X123703486Y-130049025D01* +X123713968Y-130033338D01* +X123713969Y-130033334D01* +X123713972Y-130033331D01* +X123785623Y-129860351D01* +X123822150Y-129676716D01* +X123822150Y-129489484D01* +X123822149Y-129489481D01* +X124461150Y-129489481D01* +X124461150Y-129676718D01* +X124497676Y-129860349D01* +X124569327Y-130033329D01* +X124569331Y-130033338D01* +X124643715Y-130144659D01* +X124673348Y-130189008D01* +X124805742Y-130321402D01* +X124872113Y-130365749D01* +X124961411Y-130425418D01* +X124961417Y-130425420D01* +X124961419Y-130425422D01* +X125134399Y-130497073D01* +X125318034Y-130533600D01* +X125318035Y-130533600D01* +X125505265Y-130533600D01* +X125505266Y-130533600D01* +X125688901Y-130497073D01* +X125861881Y-130425422D01* +X125861884Y-130425419D01* +X125861888Y-130425418D01* +X125906837Y-130395382D01* +X126017558Y-130321402D01* +X126149952Y-130189008D01* +X126243486Y-130049025D01* +X126253968Y-130033338D01* +X126253969Y-130033334D01* +X126253972Y-130033331D01* +X126325623Y-129860351D01* +X126362150Y-129676716D01* +X126362150Y-129489484D01* +X126331043Y-129333099D01* +X126675040Y-129333099D01* +X126675041Y-129333100D01* +X127518638Y-129333100D01* +X127485725Y-129390107D01* +X127451650Y-129517274D01* +X127451650Y-129648926D01* +X127485725Y-129776093D01* +X127518638Y-129833100D01* +X126675040Y-129833100D01* +X126683659Y-129887514D01* +X126746893Y-130082127D01* +X126839788Y-130264446D01* +X126960064Y-130429991D01* +X127104758Y-130574685D01* +X127270303Y-130694961D01* +X127452622Y-130787856D01* +X127647239Y-130851091D01* +X127647235Y-130851091D01* +X127701649Y-130859708D01* +X127701650Y-130859707D01* +X127701650Y-130016112D01* +X127758657Y-130049025D01* +X127885824Y-130083100D01* +X128017476Y-130083100D01* +X128144643Y-130049025D01* +X128201650Y-130016112D01* +X128201650Y-130859708D01* +X128256062Y-130851091D01* +X128450677Y-130787856D01* +X128632996Y-130694961D01* +X128798541Y-130574685D01* +X128943235Y-130429991D01* +X129063511Y-130264447D01* +X129133440Y-130127202D01* +X129176705Y-130083938D01* +X129237137Y-130074366D01* +X129291653Y-130102143D01* +X129309860Y-130127202D01* +X129379788Y-130264447D01* +X129500064Y-130429991D01* +X129644758Y-130574685D01* +X129810303Y-130694961D01* +X129992622Y-130787856D01* +X130187239Y-130851091D01* +X130187235Y-130851091D01* +X130241649Y-130859708D01* +X130241650Y-130859707D01* +X130241650Y-130016112D01* +X130298657Y-130049025D01* +X130425824Y-130083100D01* +X130557476Y-130083100D01* +X130684643Y-130049025D01* +X130741650Y-130016112D01* +X130741650Y-130859708D01* +X130796062Y-130851091D01* +X130990677Y-130787856D01* +X131172996Y-130694961D01* +X131338541Y-130574685D01* +X131483235Y-130429991D01* +X131603511Y-130264446D01* +X131696406Y-130082127D01* +X131759640Y-129887514D01* +X131768259Y-129833100D01* +X130924662Y-129833100D01* +X130957575Y-129776093D01* +X130991650Y-129648926D01* +X130991650Y-129517274D01* +X130984203Y-129489481D01* +X132081150Y-129489481D01* +X132081150Y-129676718D01* +X132117676Y-129860349D01* +X132189327Y-130033329D01* +X132189331Y-130033338D01* +X132263715Y-130144659D01* +X132293348Y-130189008D01* +X132425742Y-130321402D01* +X132492113Y-130365749D01* +X132581411Y-130425418D01* +X132581417Y-130425420D01* +X132581419Y-130425422D01* +X132754399Y-130497073D01* +X132938034Y-130533600D01* +X132938035Y-130533600D01* +X133125265Y-130533600D01* +X133125266Y-130533600D01* +X133308901Y-130497073D01* +X133481881Y-130425422D01* +X133481884Y-130425419D01* +X133481888Y-130425418D01* +X133526837Y-130395382D01* +X133637558Y-130321402D01* +X133769952Y-130189008D01* +X133863486Y-130049025D01* +X133873968Y-130033338D01* +X133873969Y-130033334D01* +X133873972Y-130033331D01* +X133945623Y-129860351D01* +X133982150Y-129676716D01* +X133982150Y-129489484D01* +X133982149Y-129489481D01* +X137161150Y-129489481D01* +X137161150Y-129676718D01* +X137197676Y-129860349D01* +X137269327Y-130033329D01* +X137269331Y-130033338D01* +X137343715Y-130144659D01* +X137373348Y-130189008D01* +X137505742Y-130321402D01* +X137572113Y-130365749D01* +X137661411Y-130425418D01* +X137661417Y-130425420D01* +X137661419Y-130425422D01* +X137834399Y-130497073D01* +X138018034Y-130533600D01* +X138018035Y-130533600D01* +X138205265Y-130533600D01* +X138205266Y-130533600D01* +X138388901Y-130497073D01* +X138561881Y-130425422D01* +X138561884Y-130425419D01* +X138561888Y-130425418D01* +X138606837Y-130395382D01* +X138717558Y-130321402D01* +X138849952Y-130189008D01* +X138943486Y-130049025D01* +X138953968Y-130033338D01* +X138953969Y-130033334D01* +X138953972Y-130033331D01* +X139025623Y-129860351D01* +X139062150Y-129676716D01* +X139062150Y-129489484D01* +X139062149Y-129489481D01* +X139701150Y-129489481D01* +X139701150Y-129676718D01* +X139737676Y-129860349D01* +X139809327Y-130033329D01* +X139809331Y-130033338D01* +X139883715Y-130144659D01* +X139913348Y-130189008D01* +X140045742Y-130321402D01* +X140112113Y-130365749D01* +X140201411Y-130425418D01* +X140201417Y-130425420D01* +X140201419Y-130425422D01* +X140374399Y-130497073D01* +X140558034Y-130533600D01* +X140558035Y-130533600D01* +X140745265Y-130533600D01* +X140745266Y-130533600D01* +X140928901Y-130497073D01* +X141101881Y-130425422D01* +X141101884Y-130425419D01* +X141101888Y-130425418D01* +X141146837Y-130395382D01* +X141257558Y-130321402D01* +X141389952Y-130189008D01* +X141483486Y-130049025D01* +X141493968Y-130033338D01* +X141493969Y-130033334D01* +X141493972Y-130033331D01* +X141565623Y-129860351D01* +X141602150Y-129676716D01* +X141602150Y-129489484D01* +X141602149Y-129489481D01* +X142241150Y-129489481D01* +X142241150Y-129676718D01* +X142277676Y-129860349D01* +X142349327Y-130033329D01* +X142349331Y-130033338D01* +X142423715Y-130144659D01* +X142453348Y-130189008D01* +X142585742Y-130321402D01* +X142652113Y-130365749D01* +X142741411Y-130425418D01* +X142741417Y-130425420D01* +X142741419Y-130425422D01* +X142914399Y-130497073D01* +X143098034Y-130533600D01* +X143098035Y-130533600D01* +X143285265Y-130533600D01* +X143285266Y-130533600D01* +X143468901Y-130497073D01* +X143641881Y-130425422D01* +X143641884Y-130425419D01* +X143641888Y-130425418D01* +X143686837Y-130395382D01* +X143797558Y-130321402D01* +X143929952Y-130189008D01* +X144023486Y-130049025D01* +X144033968Y-130033338D01* +X144033969Y-130033334D01* +X144033972Y-130033331D01* +X144105623Y-129860351D01* +X144142150Y-129676716D01* +X144142150Y-129489484D01* +X144142149Y-129489481D01* +X144781150Y-129489481D01* +X144781150Y-129676718D01* +X144817676Y-129860349D01* +X144889327Y-130033329D01* +X144889331Y-130033338D01* +X144963715Y-130144659D01* +X144993348Y-130189008D01* +X145125742Y-130321402D01* +X145192113Y-130365749D01* +X145281411Y-130425418D01* +X145281417Y-130425420D01* +X145281419Y-130425422D01* +X145454399Y-130497073D01* +X145638034Y-130533600D01* +X145638035Y-130533600D01* +X145825265Y-130533600D01* +X145825266Y-130533600D01* +X146008901Y-130497073D01* +X146181881Y-130425422D01* +X146181884Y-130425419D01* +X146181888Y-130425418D01* +X146226837Y-130395382D01* +X146337558Y-130321402D01* +X146469952Y-130189008D01* +X146563486Y-130049025D01* +X146573968Y-130033338D01* +X146573969Y-130033334D01* +X146573972Y-130033331D01* +X146645623Y-129860351D01* +X146682150Y-129676716D01* +X146682150Y-129489484D01* +X146682149Y-129489481D01* +X147321150Y-129489481D01* +X147321150Y-129676718D01* +X147357676Y-129860349D01* +X147429327Y-130033329D01* +X147429331Y-130033338D01* +X147503715Y-130144659D01* +X147533348Y-130189008D01* +X147665742Y-130321402D01* +X147732113Y-130365749D01* +X147821411Y-130425418D01* +X147821417Y-130425420D01* +X147821419Y-130425422D01* +X147994399Y-130497073D01* +X148178034Y-130533600D01* +X148178035Y-130533600D01* +X148365265Y-130533600D01* +X148365266Y-130533600D01* +X148548901Y-130497073D01* +X148721881Y-130425422D01* +X148721884Y-130425419D01* +X148721888Y-130425418D01* +X148766837Y-130395382D01* +X148877558Y-130321402D01* +X149009952Y-130189008D01* +X149103486Y-130049025D01* +X149113968Y-130033338D01* +X149113969Y-130033334D01* +X149113972Y-130033331D01* +X149185623Y-129860351D01* +X149222150Y-129676716D01* +X149222150Y-129489484D01* +X149222149Y-129489481D01* +X149861150Y-129489481D01* +X149861150Y-129676718D01* +X149897676Y-129860349D01* +X149969327Y-130033329D01* +X149969331Y-130033338D01* +X150043715Y-130144659D01* +X150073348Y-130189008D01* +X150205742Y-130321402D01* +X150272113Y-130365749D01* +X150361411Y-130425418D01* +X150361417Y-130425420D01* +X150361419Y-130425422D01* +X150534399Y-130497073D01* +X150718034Y-130533600D01* +X150718035Y-130533600D01* +X150905265Y-130533600D01* +X150905266Y-130533600D01* +X151088901Y-130497073D01* +X151261881Y-130425422D01* +X151261884Y-130425419D01* +X151261888Y-130425418D01* +X151306837Y-130395382D01* +X151417558Y-130321402D01* +X151549952Y-130189008D01* +X151643486Y-130049025D01* +X151653968Y-130033338D01* +X151653969Y-130033334D01* +X151653972Y-130033331D01* +X151725623Y-129860351D01* +X151762150Y-129676716D01* +X151762150Y-129561430D01* +X158875000Y-129561430D01* +X158875000Y-130154999D01* +X158875001Y-130155000D01* +X159525000Y-130155000D01* +X159525000Y-130655000D01* +X158875001Y-130655000D01* +X158875000Y-130655001D01* +X158875000Y-131248569D01* +X158911508Y-131432104D01* +X158911508Y-131432106D01* +X158983118Y-131604989D01* +X158983124Y-131605001D01* +X159087087Y-131760589D01* +X159087090Y-131760593D01* +X159219406Y-131892909D01* +X159219410Y-131892912D01* +X159374998Y-131996875D01* +X159375010Y-131996881D01* +X159547888Y-132068489D01* +X159547899Y-132068492D01* +X159575000Y-132073882D01* +X159575000Y-131321988D01* +X159584940Y-131339205D01* +X159640795Y-131395060D01* +X159709204Y-131434556D01* +X159785504Y-131455000D01* +X159864496Y-131455000D01* +X159940796Y-131434556D01* +X160009205Y-131395060D01* +X160065060Y-131339205D01* +X160075000Y-131321988D01* +X160075000Y-132073881D01* +X160102100Y-132068492D01* +X160102111Y-132068489D01* +X160274989Y-131996881D01* +X160275001Y-131996875D01* +X160430589Y-131892912D01* +X160430593Y-131892909D01* +X160562909Y-131760593D01* +X160562912Y-131760589D01* +X160666879Y-131604994D01* +X160671571Y-131593666D01* +X160711306Y-131547139D01* +X160770801Y-131532854D01* +X160800922Y-131540085D01* +X160927065Y-131592335D01* +X161091279Y-131624999D01* +X161091283Y-131625000D01* +X161258717Y-131625000D01* +X161258720Y-131624999D01* +X161422933Y-131592335D01* +X161422939Y-131592333D01* +X161575559Y-131529114D01* +X160998223Y-130951777D01* +X160781664Y-130735218D01* +X160975000Y-130735218D01* +X160975000Y-130814782D01* +X161005448Y-130888291D01* +X161061709Y-130944552D01* +X161135218Y-130975000D01* +X161214782Y-130975000D01* +X161288291Y-130944552D01* +X161344552Y-130888291D01* +X161375000Y-130814782D01* +X161375000Y-130735218D01* +X161344552Y-130661709D01* +X161288291Y-130605448D01* +X161214782Y-130575000D01* +X161135218Y-130575000D01* +X161061709Y-130605448D01* +X161005448Y-130661709D01* +X160975000Y-130735218D01* +X160781664Y-130735218D01* +X160392939Y-130346493D01* +X160365162Y-130291976D01* +X160374733Y-130231544D01* +X160392940Y-130206485D01* +X160499425Y-130100000D01* +X160853555Y-130100000D01* +X161175000Y-130421445D01* +X161496445Y-130100000D01* +X161175000Y-129778555D01* +X160853555Y-130100000D01* +X160499425Y-130100000D01* +X160392939Y-129993514D01* +X160365162Y-129938997D01* +X160374733Y-129878565D01* +X160392939Y-129853506D01* +X160821445Y-129425000D01* +X160819068Y-129422623D01* +X160819066Y-129422620D01* +X160781664Y-129385218D01* +X160975000Y-129385218D01* +X160975000Y-129464782D01* +X161005448Y-129538291D01* +X161061709Y-129594552D01* +X161135218Y-129625000D01* +X161214782Y-129625000D01* +X161288291Y-129594552D01* +X161344552Y-129538291D01* +X161375000Y-129464782D01* +X161375000Y-129385218D01* +X161364185Y-129359108D01* +X161524500Y-129359108D01* +X161524500Y-129490892D01* +X161552275Y-129594552D01* +X161558609Y-129618190D01* +X161624496Y-129732309D01* +X161624498Y-129732311D01* +X161624500Y-129732314D01* +X161717686Y-129825500D01* +X161724998Y-129829721D01* +X161765939Y-129875187D01* +X161774500Y-129915458D01* +X161774500Y-130284540D01* +X161755593Y-130342731D01* +X161725003Y-130370275D01* +X161717688Y-130374498D01* +X161624496Y-130467690D01* +X161558609Y-130581809D01* +X161558608Y-130581814D01* +X161524500Y-130709108D01* +X161524500Y-130840892D01* +X161542897Y-130909550D01* +X161558609Y-130968190D01* +X161624496Y-131082309D01* +X161624498Y-131082311D01* +X161624500Y-131082314D01* +X161717686Y-131175500D01* +X161717688Y-131175501D01* +X161717690Y-131175503D01* +X161831810Y-131241390D01* +X161831808Y-131241390D01* +X161831812Y-131241391D01* +X161831814Y-131241392D01* +X161959108Y-131275500D01* +X161959110Y-131275500D01* +X162090890Y-131275500D01* +X162090892Y-131275500D01* +X162099045Y-131273315D01* +X162160144Y-131276513D01* +X162194676Y-131298936D01* +X162887635Y-131991895D01* +X162887636Y-131991897D01* +X162958103Y-132062364D01* +X162996240Y-132078160D01* +X163035621Y-132094473D01* +X163050170Y-132100500D01* +X163050173Y-132100501D01* +X163050176Y-132100501D01* +X163161351Y-132100501D01* +X163161359Y-132100500D01* +X165749829Y-132100500D01* +X165814092Y-132073881D01* +X165841897Y-132062364D01* +X166416895Y-131487364D01* +X166416897Y-131487364D01* +X166457291Y-131446969D01* +X166481450Y-131434661D01* +X166511803Y-131419195D01* +X166511806Y-131419195D01* +X166540519Y-131423742D01* +X166572235Y-131428766D01* +X166572236Y-131428766D01* +X166572238Y-131428767D01* +X166572239Y-131428768D01* +X166582292Y-131434661D01* +X166722371Y-131528258D01* +X166722370Y-131528258D01* +X166877065Y-131592335D01* +X167041279Y-131624999D01* +X167041283Y-131625000D01* +X167208717Y-131625000D01* +X167208720Y-131624999D01* +X167372934Y-131592335D01* +X167499077Y-131540085D01* +X167560074Y-131535284D01* +X167612243Y-131567254D01* +X167628426Y-131593661D01* +X167633119Y-131604990D01* +X167633124Y-131605001D01* +X167737087Y-131760589D01* +X167737090Y-131760593D01* +X167869406Y-131892909D01* +X167869410Y-131892912D01* +X168024998Y-131996875D01* +X168025010Y-131996881D01* +X168197888Y-132068489D01* +X168197899Y-132068492D01* +X168225000Y-132073882D01* +X168225000Y-131321988D01* +X168234940Y-131339205D01* +X168290795Y-131395060D01* +X168359204Y-131434556D01* +X168435504Y-131455000D01* +X168514496Y-131455000D01* +X168590796Y-131434556D01* +X168659205Y-131395060D01* +X168715060Y-131339205D01* +X168725000Y-131321988D01* +X168725000Y-132073881D01* +X168752100Y-132068492D01* +X168752111Y-132068489D01* +X168924989Y-131996881D01* +X168925001Y-131996875D01* +X169080589Y-131892912D01* +X169080593Y-131892909D01* +X169212909Y-131760593D01* +X169212912Y-131760589D01* +X169316875Y-131605001D01* +X169316881Y-131604989D01* +X169388491Y-131432106D01* +X169388491Y-131432104D01* +X169424999Y-131248569D01* +X169425000Y-131248565D01* +X169425000Y-130655001D01* +X169424999Y-130655000D01* +X168775000Y-130655000D01* +X168775000Y-130155000D01* +X169424999Y-130155000D01* +X169425000Y-130154999D01* +X169425000Y-129561434D01* +X169424999Y-129561430D01* +X169388491Y-129377895D01* +X169388491Y-129377893D01* +X169316881Y-129205010D01* +X169316875Y-129204998D01* +X169212912Y-129049410D01* +X169212909Y-129049406D01* +X169080593Y-128917090D01* +X169080589Y-128917087D01* +X168925001Y-128813124D01* +X168924992Y-128813120D01* +X168752105Y-128741508D01* +X168725000Y-128736116D01* +X168725000Y-129488011D01* +X168715060Y-129470795D01* +X168659205Y-129414940D01* +X168590796Y-129375444D01* +X168514496Y-129355000D01* +X168435504Y-129355000D01* +X168359204Y-129375444D01* +X168290795Y-129414940D01* +X168234940Y-129470795D01* +X168225000Y-129488011D01* +X168225000Y-128736116D01* +X168197894Y-128741508D01* +X168025006Y-128813120D01* +X167928306Y-128877733D01* +X167926618Y-128894871D01* +X167934837Y-128911002D01* +X167925266Y-128971434D01* +X167907060Y-128996492D01* +X167478554Y-129424999D01* +X167478554Y-129425000D01* +X167907060Y-129853507D01* +X167934837Y-129908023D01* +X167925266Y-129968455D01* +X167907060Y-129993513D01* +X167800574Y-130099999D01* +X167907060Y-130206485D01* +X167934837Y-130261002D01* +X167925266Y-130321434D01* +X167907060Y-130346493D01* +X167371780Y-130881773D01* +X167317263Y-130909550D01* +X167279304Y-130903538D01* +X167294552Y-130888291D01* +X167325000Y-130814782D01* +X167325000Y-130735218D01* +X167294552Y-130661709D01* +X167238291Y-130605448D01* +X167164782Y-130575000D01* +X167085218Y-130575000D01* +X167011709Y-130605448D01* +X166955448Y-130661709D01* +X166925000Y-130735218D01* +X166925000Y-130814782D01* +X166955448Y-130888291D01* +X166972319Y-130905162D01* +X166963710Y-130909550D01* +X166948223Y-130907097D01* +X166932736Y-130909550D01* +X166918763Y-130902430D01* +X166903278Y-130899978D01* +X166878219Y-130881773D01* +X166804496Y-130808050D01* +X166776719Y-130753533D01* +X166775500Y-130738046D01* +X166775500Y-130709109D01* +X166771709Y-130694961D01* +X166741392Y-130581814D01* +X166741390Y-130581811D01* +X166741390Y-130581809D01* +X166675503Y-130467690D01* +X166675501Y-130467688D01* +X166675500Y-130467686D01* +X166582314Y-130374500D01* +X166582311Y-130374498D01* +X166582309Y-130374496D01* +X166468189Y-130308609D01* +X166468191Y-130308609D01* +X166406114Y-130291976D01* +X166340892Y-130274500D01* +X166209108Y-130274500D01* +X166143886Y-130291976D01* +X166081809Y-130308609D01* +X165967690Y-130374496D01* +X165967689Y-130374497D01* +X165967686Y-130374499D01* +X165967686Y-130374500D01* +X165920001Y-130422184D01* +X165865487Y-130449960D01* +X165805055Y-130440389D01* +X165779999Y-130422185D01* +X165732314Y-130374500D01* +X165732311Y-130374498D01* +X165732309Y-130374496D01* +X165618189Y-130308609D01* +X165618191Y-130308609D01* +X165556114Y-130291976D01* +X165490892Y-130274500D01* +X165359108Y-130274500D01* +X165293886Y-130291976D01* +X165231809Y-130308609D01* +X165117690Y-130374496D01* +X165117689Y-130374497D01* +X165117686Y-130374499D01* +X165117686Y-130374500D01* +X165070001Y-130422184D01* +X165015487Y-130449960D01* +X164955055Y-130440389D01* +X164929999Y-130422185D01* +X164882314Y-130374500D01* +X164882311Y-130374498D01* +X164882309Y-130374496D01* +X164768189Y-130308609D01* +X164768191Y-130308609D01* +X164706114Y-130291976D01* +X164640892Y-130274500D01* +X164568767Y-130274500D01* +X164546719Y-130267336D01* +X164523822Y-130263710D01* +X164518173Y-130258061D01* +X164510576Y-130255593D01* +X164496947Y-130236834D01* +X164480558Y-130220445D01* +X164479308Y-130212557D01* +X164474612Y-130206093D01* +X164474612Y-130182905D01* +X164470986Y-130160013D01* +X164474612Y-130152896D01* +X164474612Y-130144907D01* +X164498763Y-130105497D01* +X164504260Y-130100000D01* +X166803555Y-130100000D01* +X167125000Y-130421445D01* +X167446445Y-130100000D01* +X167125000Y-129778555D01* +X166803555Y-130100000D01* +X164504260Y-130100000D01* +X164570930Y-130033329D01* +X164673865Y-129930393D01* +X164718243Y-129904773D01* +X164768186Y-129891392D01* +X164882314Y-129825500D01* +X164929998Y-129777815D01* +X164984513Y-129750040D01* +X165044945Y-129759611D01* +X165070000Y-129777814D01* +X165117686Y-129825500D01* +X165117688Y-129825501D01* +X165117690Y-129825503D01* +X165231810Y-129891390D01* +X165231808Y-129891390D01* +X165231812Y-129891391D01* +X165231814Y-129891392D01* +X165359108Y-129925500D01* +X165359110Y-129925500D01* +X165490890Y-129925500D01* +X165490892Y-129925500D01* +X165618186Y-129891392D01* +X165618188Y-129891390D01* +X165618190Y-129891390D01* +X165732309Y-129825503D01* +X165732309Y-129825502D01* +X165732314Y-129825500D01* +X165779998Y-129777815D01* +X165834513Y-129750040D01* +X165894945Y-129759611D01* +X165920000Y-129777814D01* +X165967686Y-129825500D01* +X165967688Y-129825501D01* +X165967690Y-129825503D01* +X166081810Y-129891390D01* +X166081808Y-129891390D01* +X166081812Y-129891391D01* +X166081814Y-129891392D01* +X166209108Y-129925500D01* +X166209110Y-129925500D01* +X166340890Y-129925500D01* +X166340892Y-129925500D01* +X166468186Y-129891392D01* +X166468188Y-129891390D01* +X166468190Y-129891390D01* +X166582309Y-129825503D01* +X166582309Y-129825502D01* +X166582314Y-129825500D01* +X166675500Y-129732314D01* +X166679554Y-129725293D01* +X166741390Y-129618190D01* +X166741390Y-129618188D01* +X166741392Y-129618186D01* +X166775500Y-129490892D01* +X166775500Y-129385218D01* +X166925000Y-129385218D01* +X166925000Y-129464782D01* +X166955448Y-129538291D01* +X167011709Y-129594552D01* +X167085218Y-129625000D01* +X167164782Y-129625000D01* +X167238291Y-129594552D01* +X167294552Y-129538291D01* +X167325000Y-129464782D01* +X167325000Y-129385218D01* +X167294552Y-129311709D01* +X167238291Y-129255448D01* +X167164782Y-129225000D01* +X167085218Y-129225000D01* +X167011709Y-129255448D01* +X166955448Y-129311709D01* +X166925000Y-129385218D01* +X166775500Y-129385218D01* +X166775500Y-129359108D01* +X166741392Y-129231814D01* +X166741390Y-129231811D01* +X166741390Y-129231809D01* +X166675503Y-129117690D01* +X166675501Y-129117688D01* +X166675500Y-129117686D01* +X166582314Y-129024500D01* +X166582311Y-129024498D01* +X166582309Y-129024496D01* +X166468189Y-128958609D01* +X166468191Y-128958609D01* +X166406114Y-128941976D01* +X166340892Y-128924500D01* +X166209108Y-128924500D01* +X166143886Y-128941976D01* +X166081809Y-128958609D01* +X165967690Y-129024496D01* +X165967689Y-129024497D01* +X165967686Y-129024499D01* +X165967686Y-129024500D01* +X165920001Y-129072184D01* +X165865487Y-129099960D01* +X165805055Y-129090389D01* +X165779999Y-129072185D01* +X165732314Y-129024500D01* +X165732311Y-129024498D01* +X165732309Y-129024496D01* +X165618189Y-128958609D01* +X165618191Y-128958609D01* +X165556114Y-128941976D01* +X165490892Y-128924500D01* +X165359108Y-128924500D01* +X165293886Y-128941976D01* +X165231809Y-128958609D01* +X165117690Y-129024496D01* +X165117689Y-129024497D01* +X165117686Y-129024499D01* +X165117686Y-129024500D01* +X165070001Y-129072184D01* +X165015487Y-129099960D01* +X164955055Y-129090389D01* +X164929999Y-129072185D01* +X164882314Y-129024500D01* +X164882311Y-129024498D01* +X164882309Y-129024496D01* +X164768189Y-128958609D01* +X164768191Y-128958609D01* +X164706114Y-128941976D01* +X164640892Y-128924500D01* +X164509108Y-128924500D01* +X164443886Y-128941976D01* +X164381809Y-128958609D01* +X164267690Y-129024496D01* +X164267689Y-129024497D01* +X164267686Y-129024499D01* +X164267686Y-129024500D01* +X164220001Y-129072184D01* +X164165487Y-129099960D01* +X164105055Y-129090389D01* +X164079999Y-129072185D01* +X164032314Y-129024500D01* +X164032311Y-129024498D01* +X164032309Y-129024496D01* +X163918189Y-128958609D01* +X163918191Y-128958609D01* +X163856114Y-128941976D01* +X163790892Y-128924500D01* +X163659108Y-128924500D01* +X163593886Y-128941976D01* +X163531809Y-128958609D01* +X163417690Y-129024496D01* +X163417689Y-129024497D01* +X163417686Y-129024499D01* +X163417686Y-129024500D01* +X163370001Y-129072184D01* +X163315487Y-129099960D01* +X163255055Y-129090389D01* +X163229999Y-129072185D01* +X163182314Y-129024500D01* +X163182311Y-129024498D01* +X163182309Y-129024496D01* +X163068189Y-128958609D01* +X163068191Y-128958609D01* +X163006114Y-128941976D01* +X162940892Y-128924500D01* +X162809108Y-128924500D01* +X162743886Y-128941976D01* +X162681809Y-128958609D01* +X162567690Y-129024496D01* +X162567689Y-129024497D01* +X162567686Y-129024499D01* +X162567686Y-129024500D01* +X162520001Y-129072184D01* +X162465487Y-129099960D01* +X162405055Y-129090389D01* +X162379999Y-129072185D01* +X162332314Y-129024500D01* +X162332311Y-129024498D01* +X162332309Y-129024496D01* +X162218189Y-128958609D01* +X162218191Y-128958609D01* +X162156114Y-128941976D01* +X162090892Y-128924500D01* +X161959108Y-128924500D01* +X161893886Y-128941976D01* +X161831809Y-128958609D01* +X161717690Y-129024496D01* +X161624496Y-129117690D01* +X161558609Y-129231809D01* +X161546049Y-129278685D01* +X161524500Y-129359108D01* +X161364185Y-129359108D01* +X161344552Y-129311709D01* +X161288291Y-129255448D01* +X161214782Y-129225000D01* +X161135218Y-129225000D01* +X161061709Y-129255448D01* +X161005448Y-129311709D01* +X160975000Y-129385218D01* +X160781664Y-129385218D01* +X160392939Y-128996492D01* +X160365162Y-128941976D01* +X160373089Y-128891919D01* +X160371692Y-128877733D01* +X160274991Y-128813120D01* +X160231087Y-128794934D01* +X160102105Y-128741508D01* +X160075000Y-128736116D01* +X160075000Y-129488011D01* +X160065060Y-129470795D01* +X160009205Y-129414940D01* +X159940796Y-129375444D01* +X159864496Y-129355000D01* +X159785504Y-129355000D01* +X159709204Y-129375444D01* +X159640795Y-129414940D01* +X159584940Y-129470795D01* +X159575000Y-129488011D01* +X159575000Y-128736116D01* +X159547894Y-128741508D01* +X159375007Y-128813120D01* +X159374998Y-128813124D01* +X159219410Y-128917087D01* +X159219406Y-128917090D01* +X159087090Y-129049406D01* +X159087087Y-129049410D01* +X158983124Y-129204998D01* +X158983118Y-129205010D01* +X158911508Y-129377893D01* +X158911508Y-129377895D01* +X158875000Y-129561430D01* +X151762150Y-129561430D01* +X151762150Y-129489484D01* +X151725623Y-129305849D01* +X151653972Y-129132869D01* +X151653970Y-129132867D01* +X151653968Y-129132861D01* +X151581560Y-129024497D01* +X151549952Y-128977192D01* +X151417558Y-128844798D01* +X151373209Y-128815165D01* +X151261888Y-128740781D01* +X151261879Y-128740777D01* +X151093141Y-128670883D01* +X160774438Y-128670883D01* +X161175000Y-129071445D01* +X161575560Y-128670884D01* +X161575560Y-128670883D01* +X166724438Y-128670883D01* +X167125000Y-129071445D01* +X167525560Y-128670884D01* +X167525560Y-128670883D01* +X167372936Y-128607665D01* +X167208720Y-128575000D01* +X167041279Y-128575000D01* +X166877064Y-128607665D01* +X166877062Y-128607665D01* +X166724438Y-128670883D01* +X161575560Y-128670883D01* +X161422936Y-128607665D01* +X161258720Y-128575000D01* +X161091279Y-128575000D01* +X160927064Y-128607665D01* +X160927062Y-128607665D01* +X160774438Y-128670883D01* +X151093141Y-128670883D01* +X151088899Y-128669126D01* +X150905268Y-128632600D01* +X150905266Y-128632600D01* +X150718034Y-128632600D01* +X150718031Y-128632600D01* +X150534400Y-128669126D01* +X150361420Y-128740777D01* +X150361411Y-128740781D01* +X150205742Y-128844798D01* +X150205738Y-128844801D01* +X150073351Y-128977188D01* +X150073348Y-128977192D01* +X149969331Y-129132861D01* +X149969327Y-129132870D01* +X149897676Y-129305850D01* +X149861150Y-129489481D01* +X149222149Y-129489481D01* +X149185623Y-129305849D01* +X149113972Y-129132869D01* +X149113970Y-129132867D01* +X149113968Y-129132861D01* +X149041560Y-129024497D01* +X149009952Y-128977192D01* +X148877558Y-128844798D01* +X148833209Y-128815165D01* +X148721888Y-128740781D01* +X148721879Y-128740777D01* +X148548899Y-128669126D01* +X148365268Y-128632600D01* +X148365266Y-128632600D01* +X148178034Y-128632600D01* +X148178031Y-128632600D01* +X147994400Y-128669126D01* +X147821420Y-128740777D01* +X147821411Y-128740781D01* +X147665742Y-128844798D01* +X147665738Y-128844801D01* +X147533351Y-128977188D01* +X147533348Y-128977192D01* +X147429331Y-129132861D01* +X147429327Y-129132870D01* +X147357676Y-129305850D01* +X147321150Y-129489481D01* +X146682149Y-129489481D01* +X146645623Y-129305849D01* +X146573972Y-129132869D01* +X146573970Y-129132867D01* +X146573968Y-129132861D01* +X146501560Y-129024497D01* +X146469952Y-128977192D01* +X146337558Y-128844798D01* +X146293209Y-128815165D01* +X146181888Y-128740781D01* +X146181879Y-128740777D01* +X146008899Y-128669126D01* +X145825268Y-128632600D01* +X145825266Y-128632600D01* +X145638034Y-128632600D01* +X145638031Y-128632600D01* +X145454400Y-128669126D01* +X145281420Y-128740777D01* +X145281411Y-128740781D01* +X145125742Y-128844798D01* +X145125738Y-128844801D01* +X144993351Y-128977188D01* +X144993348Y-128977192D01* +X144889331Y-129132861D01* +X144889327Y-129132870D01* +X144817676Y-129305850D01* +X144781150Y-129489481D01* +X144142149Y-129489481D01* +X144105623Y-129305849D01* +X144033972Y-129132869D01* +X144033970Y-129132867D01* +X144033968Y-129132861D01* +X143961560Y-129024497D01* +X143929952Y-128977192D01* +X143797558Y-128844798D01* +X143753209Y-128815165D01* +X143641888Y-128740781D01* +X143641879Y-128740777D01* +X143468899Y-128669126D01* +X143285268Y-128632600D01* +X143285266Y-128632600D01* +X143098034Y-128632600D01* +X143098031Y-128632600D01* +X142914400Y-128669126D01* +X142741420Y-128740777D01* +X142741411Y-128740781D01* +X142585742Y-128844798D01* +X142585738Y-128844801D01* +X142453351Y-128977188D01* +X142453348Y-128977192D01* +X142349331Y-129132861D01* +X142349327Y-129132870D01* +X142277676Y-129305850D01* +X142241150Y-129489481D01* +X141602149Y-129489481D01* +X141565623Y-129305849D01* +X141493972Y-129132869D01* +X141493970Y-129132867D01* +X141493968Y-129132861D01* +X141421560Y-129024497D01* +X141389952Y-128977192D01* +X141257558Y-128844798D01* +X141213209Y-128815165D01* +X141101888Y-128740781D01* +X141101879Y-128740777D01* +X140928899Y-128669126D01* +X140745268Y-128632600D01* +X140745266Y-128632600D01* +X140558034Y-128632600D01* +X140558031Y-128632600D01* +X140374400Y-128669126D01* +X140201420Y-128740777D01* +X140201411Y-128740781D01* +X140045742Y-128844798D01* +X140045738Y-128844801D01* +X139913351Y-128977188D01* +X139913348Y-128977192D01* +X139809331Y-129132861D01* +X139809327Y-129132870D01* +X139737676Y-129305850D01* +X139701150Y-129489481D01* +X139062149Y-129489481D01* +X139025623Y-129305849D01* +X138953972Y-129132869D01* +X138953970Y-129132867D01* +X138953968Y-129132861D01* +X138881560Y-129024497D01* +X138849952Y-128977192D01* +X138717558Y-128844798D01* +X138673209Y-128815165D01* +X138561888Y-128740781D01* +X138561879Y-128740777D01* +X138388899Y-128669126D01* +X138205268Y-128632600D01* +X138205266Y-128632600D01* +X138018034Y-128632600D01* +X138018031Y-128632600D01* +X137834400Y-128669126D01* +X137661420Y-128740777D01* +X137661411Y-128740781D01* +X137505742Y-128844798D01* +X137505738Y-128844801D01* +X137373351Y-128977188D01* +X137373348Y-128977192D01* +X137269331Y-129132861D01* +X137269327Y-129132870D01* +X137197676Y-129305850D01* +X137161150Y-129489481D01* +X133982149Y-129489481D01* +X133945623Y-129305849D01* +X133873972Y-129132869D01* +X133873970Y-129132867D01* +X133873968Y-129132861D01* +X133801560Y-129024497D01* +X133769952Y-128977192D01* +X133637558Y-128844798D01* +X133593209Y-128815165D01* +X133481888Y-128740781D01* +X133481879Y-128740777D01* +X133308899Y-128669126D01* +X133125268Y-128632600D01* +X133125266Y-128632600D01* +X132938034Y-128632600D01* +X132938031Y-128632600D01* +X132754400Y-128669126D01* +X132581420Y-128740777D01* +X132581411Y-128740781D01* +X132425742Y-128844798D01* +X132425738Y-128844801D01* +X132293351Y-128977188D01* +X132293348Y-128977192D01* +X132189331Y-129132861D01* +X132189327Y-129132870D01* +X132117676Y-129305850D01* +X132081150Y-129489481D01* +X130984203Y-129489481D01* +X130957575Y-129390107D01* +X130924662Y-129333100D01* +X131768259Y-129333100D01* +X131768259Y-129333099D01* +X131759640Y-129278685D01* +X131696406Y-129084072D01* +X131603511Y-128901753D01* +X131483235Y-128736208D01* +X131338541Y-128591514D01* +X131172996Y-128471238D01* +X130990677Y-128378343D01* +X130796064Y-128315109D01* +X130741650Y-128306490D01* +X130741650Y-129150088D01* +X130684643Y-129117175D01* +X130557476Y-129083100D01* +X130425824Y-129083100D01* +X130298657Y-129117175D01* +X130241650Y-129150088D01* +X130241650Y-128306491D01* +X130241649Y-128306490D01* +X130187235Y-128315109D01* +X129992622Y-128378343D01* +X129810303Y-128471238D01* +X129644758Y-128591514D01* +X129500064Y-128736208D01* +X129379788Y-128901753D01* +X129309860Y-129038997D01* +X129266595Y-129082262D01* +X129206163Y-129091833D01* +X129151647Y-129064056D01* +X129133440Y-129038997D01* +X129063511Y-128901753D01* +X128943235Y-128736208D01* +X128798541Y-128591514D01* +X128632996Y-128471238D01* +X128450677Y-128378343D01* +X128256064Y-128315109D01* +X128201650Y-128306490D01* +X128201650Y-129150088D01* +X128144643Y-129117175D01* +X128017476Y-129083100D01* +X127885824Y-129083100D01* +X127758657Y-129117175D01* +X127701650Y-129150088D01* +X127701650Y-128306491D01* +X127701649Y-128306490D01* +X127647235Y-128315109D01* +X127452622Y-128378343D01* +X127270303Y-128471238D01* +X127104758Y-128591514D01* +X126960064Y-128736208D01* +X126839788Y-128901753D01* +X126746893Y-129084072D01* +X126683659Y-129278685D01* +X126675040Y-129333099D01* +X126331043Y-129333099D01* +X126325623Y-129305849D01* +X126253972Y-129132869D01* +X126253970Y-129132867D01* +X126253968Y-129132861D01* +X126181560Y-129024497D01* +X126149952Y-128977192D01* +X126017558Y-128844798D01* +X125973209Y-128815165D01* +X125861888Y-128740781D01* +X125861879Y-128740777D01* +X125688899Y-128669126D01* +X125505268Y-128632600D01* +X125505266Y-128632600D01* +X125318034Y-128632600D01* +X125318031Y-128632600D01* +X125134400Y-128669126D01* +X124961420Y-128740777D01* +X124961411Y-128740781D01* +X124805742Y-128844798D01* +X124805738Y-128844801D01* +X124673351Y-128977188D01* +X124673348Y-128977192D01* +X124569331Y-129132861D01* +X124569327Y-129132870D01* +X124497676Y-129305850D01* +X124461150Y-129489481D01* +X123822149Y-129489481D01* +X123785623Y-129305849D01* +X123713972Y-129132869D01* +X123713970Y-129132867D01* +X123713968Y-129132861D01* +X123641560Y-129024497D01* +X123609952Y-128977192D01* +X123477558Y-128844798D01* +X123433209Y-128815165D01* +X123321888Y-128740781D01* +X123321879Y-128740777D01* +X123148899Y-128669126D01* +X122965268Y-128632600D01* +X122965266Y-128632600D01* +X122778034Y-128632600D01* +X122778031Y-128632600D01* +X122594400Y-128669126D01* +X122421420Y-128740777D01* +X122421411Y-128740781D01* +X122265742Y-128844798D01* +X122265738Y-128844801D01* +X122133351Y-128977188D01* +X122133348Y-128977192D01* +X122029331Y-129132861D01* +X122029327Y-129132870D01* +X121957676Y-129305850D01* +X121921150Y-129489481D01* +X121282149Y-129489481D01* +X121245623Y-129305849D01* +X121173972Y-129132869D01* +X121173970Y-129132867D01* +X121173968Y-129132861D01* +X121101560Y-129024497D01* +X121069952Y-128977192D01* +X120937558Y-128844798D01* +X120893209Y-128815165D01* +X120781888Y-128740781D01* +X120781879Y-128740777D01* +X120608899Y-128669126D01* +X120425268Y-128632600D01* +X120425266Y-128632600D01* +X120238034Y-128632600D01* +X120238031Y-128632600D01* +X120054400Y-128669126D01* +X119881420Y-128740777D01* +X119881411Y-128740781D01* +X119725742Y-128844798D01* +X119725738Y-128844801D01* +X119593351Y-128977188D01* +X119593348Y-128977192D01* +X119489331Y-129132861D01* +X119489327Y-129132870D01* +X119417676Y-129305850D01* +X119381150Y-129489481D01* +X118742149Y-129489481D01* +X118705623Y-129305849D01* +X118633972Y-129132869D01* +X118633970Y-129132867D01* +X118633968Y-129132861D01* +X118561560Y-129024497D01* +X118529952Y-128977192D01* +X118397558Y-128844798D01* +X118353209Y-128815165D01* +X118241888Y-128740781D01* +X118241879Y-128740777D01* +X118068899Y-128669126D01* +X117885268Y-128632600D01* +X117885266Y-128632600D01* +X117698034Y-128632600D01* +X117698031Y-128632600D01* +X117514400Y-128669126D01* +X117341420Y-128740777D01* +X117341411Y-128740781D01* +X117185742Y-128844798D01* +X117185738Y-128844801D01* +X117053351Y-128977188D01* +X117053348Y-128977192D01* +X116949331Y-129132861D01* +X116949327Y-129132870D01* +X116877676Y-129305850D01* +X116841150Y-129489481D01* +X116202150Y-129489481D01* +X116202150Y-128768280D01* +X116202149Y-128768278D01* +X116202149Y-128768272D01* +X116193417Y-128724379D01* +X116193415Y-128724375D01* +X116160155Y-128674598D01* +X116160154Y-128674596D01* +X116151968Y-128669126D01* +X116110374Y-128641334D01* +X116110370Y-128641332D01* +X116066477Y-128632600D01* +X116066470Y-128632600D01* +X114436830Y-128632600D01* +X114436822Y-128632600D01* +X114392929Y-128641332D01* +X114392925Y-128641334D01* +X114343148Y-128674594D01* +X114343144Y-128674598D01* +X114309884Y-128724375D01* +X114309882Y-128724379D01* +X114301150Y-128768272D01* +X80850819Y-128768272D01* +X80847557Y-125540691D01* +X167049500Y-125540691D01* +X167049500Y-125659309D01* +X167076574Y-125760351D01* +X167080202Y-125773890D01* +X167139507Y-125876608D01* +X167139509Y-125876610D01* +X167139511Y-125876613D01* +X167223387Y-125960489D01* +X167223389Y-125960490D01* +X167223391Y-125960492D01* +X167326110Y-126019797D01* +X167326111Y-126019797D01* +X167326114Y-126019799D01* +X167440691Y-126050500D01* +X167440693Y-126050500D01* +X167559307Y-126050500D01* +X167559309Y-126050500D01* +X167673886Y-126019799D01* +X167673888Y-126019797D01* +X167673890Y-126019797D01* +X167776608Y-125960492D01* +X167776608Y-125960491D01* +X167776613Y-125960489D01* +X167860489Y-125876613D01* +X167919799Y-125773886D01* +X167950500Y-125659309D01* +X167950500Y-125540691D01* +X167919799Y-125426114D01* +X167919797Y-125426111D01* +X167919797Y-125426109D01* +X167860492Y-125323391D01* +X167860490Y-125323389D01* +X167860489Y-125323387D01* +X167776613Y-125239511D01* +X167776610Y-125239509D01* +X167776608Y-125239507D01* +X167673889Y-125180202D01* +X167673890Y-125180202D01* +X167660351Y-125176574D01* +X167559309Y-125149500D01* +X167440691Y-125149500D01* +X167370567Y-125168289D01* +X167326109Y-125180202D01* +X167223391Y-125239507D01* +X167139507Y-125323391D01* +X167080202Y-125426109D01* +X167080201Y-125426114D01* +X167049500Y-125540691D01* +X80847557Y-125540691D01* +X80836933Y-115030291D01* +X100619750Y-115030291D01* +X100619750Y-115148909D01* +X100634137Y-115202600D01* +X100650452Y-115263490D01* +X100709757Y-115366208D01* +X100709759Y-115366210D01* +X100709761Y-115366213D01* +X100793637Y-115450089D01* +X100793639Y-115450090D01* +X100793641Y-115450092D01* +X100896360Y-115509397D01* +X100896361Y-115509397D01* +X100896364Y-115509399D01* +X101010941Y-115540100D01* +X101010943Y-115540100D01* +X101129557Y-115540100D01* +X101129559Y-115540100D01* +X101244136Y-115509399D01* +X101244138Y-115509397D01* +X101244140Y-115509397D01* +X101346858Y-115450092D01* +X101346858Y-115450091D01* +X101346863Y-115450089D01* +X101430739Y-115366213D01* +X101490049Y-115263486D01* +X101520750Y-115148909D01* +X101520750Y-115030291D01* +X101490049Y-114915714D01* +X101490047Y-114915711D01* +X101490047Y-114915709D01* +X101430742Y-114812991D01* +X101430740Y-114812989D01* +X101430739Y-114812987D01* +X101346863Y-114729111D01* +X101346860Y-114729109D01* +X101346858Y-114729107D01* +X101244139Y-114669802D01* +X101244140Y-114669802D01* +X101230601Y-114666174D01* +X101129559Y-114639100D01* +X101010941Y-114639100D01* +X100940817Y-114657889D01* +X100896359Y-114669802D01* +X100793641Y-114729107D01* +X100709757Y-114812991D01* +X100650452Y-114915709D01* +X100633287Y-114979769D01* +X100619750Y-115030291D01* +X80836933Y-115030291D01* +X80835920Y-114027891D01* +X169286750Y-114027891D01* +X169286750Y-114146509D01* +X169291615Y-114164665D01* +X169317452Y-114261090D01* +X169376757Y-114363808D01* +X169376759Y-114363810D01* +X169376761Y-114363813D01* +X169460637Y-114447689D01* +X169460639Y-114447690D01* +X169460641Y-114447692D01* +X169563360Y-114506997D01* +X169563361Y-114506997D01* +X169563364Y-114506999D01* +X169677941Y-114537700D01* +X169677943Y-114537700D01* +X169792481Y-114537700D01* +X169850672Y-114556607D01* +X169862485Y-114566696D01* +X176760785Y-121464995D01* +X176760786Y-121464997D01* +X176831253Y-121535464D01* +X176831254Y-121535464D01* +X176831255Y-121535465D01* +X176923321Y-121573600D01* +X176923322Y-121573600D01* +X177022978Y-121573600D01* +X208942151Y-121573600D01* +X209000342Y-121592507D01* +X209036306Y-121642007D01* +X209041151Y-121672600D01* +X209041151Y-121954623D01* +X209056002Y-122048399D01* +X209056004Y-122048404D01* +X209113600Y-122161442D01* +X209203308Y-122251150D01* +X209316346Y-122308746D01* +X209410131Y-122323600D01* +X210973168Y-122323599D01* +X210973171Y-122323599D01* +X210973172Y-122323598D01* +X211020061Y-122316172D01* +X211066949Y-122308747D01* +X211066949Y-122308746D01* +X211066954Y-122308746D01* +X211179992Y-122251150D01* +X211269700Y-122161442D01* +X211327296Y-122048404D01* +X211342150Y-121954619D01* +X211342149Y-120691582D01* +X211342149Y-120691581D01* +X211342149Y-120691578D01* +X211342148Y-120691576D01* +X211327297Y-120597800D01* +X211327296Y-120597798D01* +X211327296Y-120597796D01* +X211269700Y-120484758D01* +X211179992Y-120395050D01* +X211066954Y-120337454D01* +X211066955Y-120337454D01* +X210973172Y-120322600D01* +X210720416Y-120322600D01* +X210662225Y-120303693D01* +X210626261Y-120254193D01* +X210626261Y-120193007D01* +X210662225Y-120143507D01* +X210689824Y-120129445D01* +X210859863Y-120074196D01* +X211049202Y-119977724D01* +X211221114Y-119852822D01* +X211371372Y-119702564D01* +X211496274Y-119530652D01* +X211592745Y-119341315D01* +X211658408Y-119139222D01* +X211668881Y-119073100D01* +X210624662Y-119073100D01* +X210657575Y-119016093D01* +X210691650Y-118888926D01* +X210691650Y-118757274D01* +X210657575Y-118630107D01* +X210624662Y-118573100D01* +X211668881Y-118573100D01* +X211668881Y-118573099D01* +X211658408Y-118506977D01* +X211592745Y-118304884D01* +X211496274Y-118115547D01* +X211371372Y-117943635D01* +X211221114Y-117793377D01* +X211049202Y-117668475D01* +X210859865Y-117572004D01* +X210657771Y-117506340D01* +X210447900Y-117473100D01* +X210441651Y-117473100D01* +X210441650Y-117473101D01* +X210441650Y-118390088D01* +X210384643Y-118357175D01* +X210257476Y-118323100D01* +X210125824Y-118323100D01* +X209998657Y-118357175D01* +X209941650Y-118390088D01* +X209941650Y-117473101D01* +X209941649Y-117473100D01* +X209935400Y-117473100D01* +X209725528Y-117506340D01* +X209523434Y-117572004D01* +X209334097Y-117668475D01* +X209162185Y-117793377D01* +X209011927Y-117943635D01* +X208887025Y-118115547D01* +X208790554Y-118304884D01* +X208724891Y-118506977D01* +X208714418Y-118573099D01* +X208714419Y-118573100D01* +X209758638Y-118573100D01* +X209725725Y-118630107D01* +X209691650Y-118757274D01* +X209691650Y-118888926D01* +X209725725Y-119016093D01* +X209758638Y-119073100D01* +X208714419Y-119073100D01* +X208724891Y-119139222D01* +X208790554Y-119341315D01* +X208887025Y-119530652D01* +X209011927Y-119702564D01* +X209162185Y-119852822D01* +X209334097Y-119977724D01* +X209523436Y-120074196D01* +X209693478Y-120129445D01* +X209742978Y-120165409D01* +X209761886Y-120223599D01* +X209742979Y-120281790D01* +X209693479Y-120317754D01* +X209662886Y-120322600D01* +X209410128Y-120322600D01* +X209410126Y-120322601D01* +X209316350Y-120337452D01* +X209316345Y-120337454D01* +X209203309Y-120395049D01* +X209113599Y-120484759D01* +X209056004Y-120597795D01* +X209041150Y-120691578D01* +X209041150Y-120973600D01* +X209022243Y-121031791D01* +X208972743Y-121067755D01* +X208942150Y-121072600D01* +X177117918Y-121072600D01* +X177059727Y-121053693D01* +X177047914Y-121043604D01* +X170216746Y-114212435D01* +X170188969Y-114157918D01* +X170187750Y-114142431D01* +X170187750Y-114027892D01* +X170164131Y-113939745D01* +X170157049Y-113913314D01* +X170157047Y-113913311D01* +X170157047Y-113913309D01* +X170097742Y-113810591D01* +X170097740Y-113810589D01* +X170097739Y-113810587D01* +X170013863Y-113726711D01* +X170013860Y-113726709D01* +X170013858Y-113726707D01* +X169911139Y-113667402D01* +X169911140Y-113667402D01* +X169897601Y-113663774D01* +X169796559Y-113636700D01* +X169677941Y-113636700D01* +X169607817Y-113655489D01* +X169563359Y-113667402D01* +X169460641Y-113726707D01* +X169376757Y-113810591D01* +X169317452Y-113913309D01* +X169317451Y-113913314D01* +X169286750Y-114027891D01* +X80835920Y-114027891D01* +X80833388Y-111523491D01* +X106381450Y-111523491D01* +X106381450Y-111642109D01* +X106400442Y-111712986D01* +X106412152Y-111756690D01* +X106471457Y-111859408D01* +X106471459Y-111859410D01* +X106471461Y-111859413D01* +X106555337Y-111943289D01* +X106555339Y-111943290D01* +X106555341Y-111943292D01* +X106658060Y-112002597D01* +X106658061Y-112002597D01* +X106658064Y-112002599D01* +X106772641Y-112033300D01* +X106772643Y-112033300D01* +X106891257Y-112033300D01* +X106891259Y-112033300D01* +X107005836Y-112002599D01* +X107005838Y-112002597D01* +X107005840Y-112002597D01* +X107108558Y-111943292D01* +X107108558Y-111943291D01* +X107108563Y-111943289D01* +X107192439Y-111859413D01* +X107192442Y-111859408D01* +X107251747Y-111756690D01* +X107251747Y-111756688D01* +X107251749Y-111756686D01* +X107282450Y-111642109D01* +X107282450Y-111523491D01* +X107270741Y-111479791D01* +X110326750Y-111479791D01* +X110326750Y-111598409D01* +X110348261Y-111678689D01* +X110357452Y-111712990D01* +X110416757Y-111815708D01* +X110416759Y-111815710D01* +X110416761Y-111815713D01* +X110500637Y-111899589D01* +X110500639Y-111899590D01* +X110500641Y-111899592D01* +X110603360Y-111958897D01* +X110603361Y-111958897D01* +X110603364Y-111958899D01* +X110717941Y-111989600D01* +X110717943Y-111989600D01* +X110836557Y-111989600D01* +X110836559Y-111989600D01* +X110951136Y-111958899D01* +X110951138Y-111958897D01* +X110951140Y-111958897D01* +X111053858Y-111899592D01* +X111053858Y-111899591D01* +X111053863Y-111899589D01* +X111137739Y-111815713D01* +X111161759Y-111774109D01* +X111197047Y-111712990D01* +X111197047Y-111712988D01* +X111197049Y-111712986D01* +X111227750Y-111598409D01* +X111227750Y-111479791D01* +X111197049Y-111365214D01* +X111197047Y-111365211D01* +X111197047Y-111365209D01* +X111137742Y-111262491D01* +X111137740Y-111262489D01* +X111137739Y-111262487D01* +X111053863Y-111178611D01* +X111053860Y-111178609D01* +X111053858Y-111178607D01* +X110951139Y-111119302D01* +X110951140Y-111119302D01* +X110937601Y-111115674D01* +X110836559Y-111088600D01* +X110717941Y-111088600D01* +X110647817Y-111107389D01* +X110603359Y-111119302D01* +X110500641Y-111178607D01* +X110416757Y-111262491D01* +X110357452Y-111365209D01* +X110340287Y-111429269D01* +X110326750Y-111479791D01* +X107270741Y-111479791D01* +X107251749Y-111408914D01* +X107251747Y-111408911D01* +X107251747Y-111408909D01* +X107192442Y-111306191D01* +X107192440Y-111306189D01* +X107192439Y-111306187D01* +X107108563Y-111222311D01* +X107108560Y-111222309D01* +X107108558Y-111222307D01* +X107005839Y-111163002D01* +X107005840Y-111163002D01* +X106992301Y-111159374D01* +X106891259Y-111132300D01* +X106772641Y-111132300D01* +X106702517Y-111151089D01* +X106658059Y-111163002D01* +X106555341Y-111222307D01* +X106471457Y-111306191D01* +X106412152Y-111408909D01* +X106412151Y-111408914D01* +X106381450Y-111523491D01* +X80833388Y-111523491D01* +X80830859Y-109021091D01* +X91646150Y-109021091D01* +X91646150Y-109139709D01* +X91662225Y-109199700D01* +X91676852Y-109254290D01* +X91736157Y-109357008D01* +X91736159Y-109357010D01* +X91736161Y-109357013D01* +X91820037Y-109440889D01* +X91820039Y-109440890D01* +X91820041Y-109440892D01* +X91922760Y-109500197D01* +X91922761Y-109500197D01* +X91922764Y-109500199D01* +X92037341Y-109530900D01* +X92037343Y-109530900D01* +X92155957Y-109530900D01* +X92155959Y-109530900D01* +X92270536Y-109500199D01* +X92305249Y-109480156D01* +X92365097Y-109467435D01* +X92420993Y-109492321D01* +X92451586Y-109545308D01* +X92453750Y-109565893D01* +X92453750Y-109673594D01* +X92488354Y-109847563D01* +X92488356Y-109847569D01* +X92556237Y-110011446D01* +X92631778Y-110124502D01* +X92654786Y-110158936D01* +X92780214Y-110284364D01* +X92927703Y-110382912D01* +X93091584Y-110450795D01* +X93265558Y-110485400D01* +X93265559Y-110485400D01* +X93442941Y-110485400D01* +X93442942Y-110485400D01* +X93616916Y-110450795D01* +X93772048Y-110386535D01* +X93809934Y-110379000D01* +X113105482Y-110379000D01* +X113163673Y-110397907D01* +X113199637Y-110447407D01* +X113199637Y-110508593D01* +X113175487Y-110548001D01* +X111588891Y-112134597D01* +X111094584Y-112628904D01* +X111040067Y-112656681D01* +X111024580Y-112657900D01* +X110910041Y-112657900D01* +X110839917Y-112676689D01* +X110795459Y-112688602D01* +X110692741Y-112747907D01* +X110608857Y-112831791D01* +X110549552Y-112934509D01* +X110535082Y-112988511D01* +X110518850Y-113049091D01* +X110518850Y-113167709D01* +X110542821Y-113257168D01* +X110549552Y-113282290D01* +X110608857Y-113385008D01* +X110608859Y-113385010D01* +X110608861Y-113385013D01* +X110692737Y-113468889D01* +X110692739Y-113468890D01* +X110692741Y-113468892D01* +X110795460Y-113528197D01* +X110795461Y-113528197D01* +X110795464Y-113528199D01* +X110910041Y-113558900D01* +X110910043Y-113558900D01* +X111028657Y-113558900D01* +X111028659Y-113558900D01* +X111143236Y-113528199D01* +X111143238Y-113528197D01* +X111143240Y-113528197D01* +X111245958Y-113468892D01* +X111245958Y-113468891D01* +X111245963Y-113468889D01* +X111329839Y-113385013D01* +X111384874Y-113289691D01* +X126183650Y-113289691D01* +X126183650Y-113408309D01* +X126199883Y-113468892D01* +X126214352Y-113522890D01* +X126273657Y-113625608D01* +X126273659Y-113625610D01* +X126273661Y-113625613D01* +X126357537Y-113709489D01* +X126357539Y-113709490D01* +X126357541Y-113709492D01* +X126460260Y-113768797D01* +X126460261Y-113768797D01* +X126460264Y-113768799D01* +X126574841Y-113799500D01* +X126574843Y-113799500D01* +X126693457Y-113799500D01* +X126693459Y-113799500D01* +X126808036Y-113768799D01* +X126808038Y-113768797D01* +X126808040Y-113768797D01* +X126910758Y-113709492D01* +X126910758Y-113709491D01* +X126910763Y-113709489D01* +X126994639Y-113625613D01* +X127032373Y-113560256D01* +X127053947Y-113522890D01* +X127053947Y-113522888D01* +X127053949Y-113522886D01* +X127083332Y-113413228D01* +X170966351Y-113413228D01* +X170966351Y-113541371D01* +X170991349Y-113667043D01* +X170991349Y-113667045D01* +X171040383Y-113785424D01* +X171040384Y-113785426D01* +X171040385Y-113785427D01* +X171111573Y-113891969D01* +X176217980Y-118998376D01* +X176324523Y-119069565D01* +X176442906Y-119118601D01* +X176568581Y-119143600D01* +X176568582Y-119143600D01* +X196915718Y-119143600D01* +X196915719Y-119143600D01* +X197041394Y-119118601D01* +X197159777Y-119069565D01* +X197266319Y-118998377D01* +X202656927Y-113607769D01* +X202728115Y-113501227D01* +X202777151Y-113382844D01* +X202802149Y-113257169D01* +X202802149Y-113129031D01* +X202777151Y-113003356D01* +X202734685Y-112900835D01* +X202728116Y-112884975D01* +X202656929Y-112778434D01* +X202656927Y-112778431D01* +X202566319Y-112687823D01* +X202521535Y-112657900D01* +X202459774Y-112616633D01* +X202341394Y-112567599D01* +X202215721Y-112542601D01* +X202215719Y-112542601D01* +X202087581Y-112542601D01* +X202087578Y-112542601D01* +X201961906Y-112567599D01* +X201961904Y-112567599D01* +X201843525Y-112616633D01* +X201736984Y-112687820D01* +X196611200Y-117813604D01* +X196556683Y-117841381D01* +X196541196Y-117842600D01* +X176943104Y-117842600D01* +X176884913Y-117823693D01* +X176873100Y-117813604D01* +X175791387Y-116731891D01* +X184652150Y-116731891D01* +X184652150Y-116850509D01* +X184679224Y-116951551D01* +X184682852Y-116965090D01* +X184742157Y-117067808D01* +X184742159Y-117067810D01* +X184742161Y-117067813D01* +X184826037Y-117151689D01* +X184826039Y-117151690D01* +X184826041Y-117151692D01* +X184928760Y-117210997D01* +X184928761Y-117210997D01* +X184928764Y-117210999D01* +X185043341Y-117241700D01* +X185043343Y-117241700D01* +X185161957Y-117241700D01* +X185161959Y-117241700D01* +X185276536Y-117210999D01* +X185276538Y-117210997D01* +X185276540Y-117210997D01* +X185379258Y-117151692D01* +X185379258Y-117151691D01* +X185379263Y-117151689D01* +X185463139Y-117067813D01* +X185522449Y-116965086D01* +X185553150Y-116850509D01* +X185553150Y-116731891D01* +X185522449Y-116617314D01* +X185522447Y-116617311D01* +X185522447Y-116617309D01* +X185463142Y-116514591D01* +X185463140Y-116514589D01* +X185463139Y-116514587D01* +X185379263Y-116430711D01* +X185379260Y-116430709D01* +X185379258Y-116430707D01* +X185276539Y-116371402D01* +X185276540Y-116371402D01* +X185263001Y-116367774D01* +X185161959Y-116340700D01* +X185043341Y-116340700D01* +X184973217Y-116359489D01* +X184928759Y-116371402D01* +X184826041Y-116430707D01* +X184742157Y-116514591D01* +X184682852Y-116617309D01* +X184682851Y-116617314D01* +X184652150Y-116731891D01* +X175791387Y-116731891D01* +X175090602Y-116031106D01* +X175027087Y-115967591D01* +X186646350Y-115967591D01* +X186646350Y-116086209D01* +X186673424Y-116187251D01* +X186677052Y-116200790D01* +X186736357Y-116303508D01* +X186736359Y-116303510D01* +X186736361Y-116303513D01* +X186820237Y-116387389D01* +X186820239Y-116387390D01* +X186820241Y-116387392D01* +X186922960Y-116446697D01* +X186922961Y-116446697D01* +X186922964Y-116446699D01* +X187037541Y-116477400D01* +X187037543Y-116477400D01* +X187156157Y-116477400D01* +X187156159Y-116477400D01* +X187270736Y-116446699D01* +X187270738Y-116446697D01* +X187270740Y-116446697D01* +X187373458Y-116387392D01* +X187373458Y-116387391D01* +X187373463Y-116387389D01* +X187457339Y-116303513D01* +X187516649Y-116200786D01* +X187547350Y-116086209D01* +X187547350Y-115967591D01* +X187516649Y-115853014D01* +X187516647Y-115853011D01* +X187516647Y-115853009D01* +X187457342Y-115750291D01* +X187457340Y-115750289D01* +X187457339Y-115750287D01* +X187373463Y-115666411D01* +X187373460Y-115666409D01* +X187373458Y-115666407D01* +X187270739Y-115607102D01* +X187270740Y-115607102D01* +X187257201Y-115603474D01* +X187156159Y-115576400D01* +X187037541Y-115576400D01* +X186967417Y-115595189D01* +X186922959Y-115607102D01* +X186820241Y-115666407D01* +X186736357Y-115750291D01* +X186677052Y-115853009D01* +X186677051Y-115853014D01* +X186646350Y-115967591D01* +X175027087Y-115967591D01* +X174425704Y-115366208D01* +X173635287Y-114575791D01* +X184801250Y-114575791D01* +X184801250Y-114694409D01* +X184828324Y-114795451D01* +X184831952Y-114808990D01* +X184891257Y-114911708D01* +X184891259Y-114911710D01* +X184891261Y-114911713D01* +X184975137Y-114995589D01* +X184975139Y-114995590D01* +X184975141Y-114995592D01* +X185077860Y-115054897D01* +X185077861Y-115054897D01* +X185077864Y-115054899D01* +X185192441Y-115085600D01* +X185192443Y-115085600D01* +X185311057Y-115085600D01* +X185311059Y-115085600D01* +X185425636Y-115054899D01* +X185425638Y-115054897D01* +X185425640Y-115054897D01* +X185528358Y-114995592D01* +X185528358Y-114995591D01* +X185528363Y-114995589D01* +X185612239Y-114911713D01* +X185670150Y-114811409D01* +X185671547Y-114808990D01* +X185671547Y-114808988D01* +X185671549Y-114808986D01* +X185702250Y-114694409D01* +X185702250Y-114692791D01* +X192525650Y-114692791D01* +X192525650Y-114811409D01* +X192526073Y-114812987D01* +X192556352Y-114925990D01* +X192615657Y-115028708D01* +X192615659Y-115028710D01* +X192615661Y-115028713D01* +X192699537Y-115112589D01* +X192699539Y-115112590D01* +X192699541Y-115112592D01* +X192802260Y-115171897D01* +X192802261Y-115171897D01* +X192802264Y-115171899D01* +X192916841Y-115202600D01* +X192916843Y-115202600D01* +X193035457Y-115202600D01* +X193035459Y-115202600D01* +X193150036Y-115171899D01* +X193150038Y-115171897D01* +X193150040Y-115171897D01* +X193252758Y-115112592D01* +X193252758Y-115112591D01* +X193252763Y-115112589D01* +X193336639Y-115028713D01* +X193355762Y-114995592D01* +X193395947Y-114925990D01* +X193395947Y-114925988D01* +X193395949Y-114925986D01* +X193426650Y-114811409D01* +X193426650Y-114692791D01* +X193395949Y-114578214D01* +X193395947Y-114578211D01* +X193395947Y-114578209D01* +X193336642Y-114475491D01* +X193336640Y-114475489D01* +X193336639Y-114475487D01* +X193252763Y-114391611D01* +X193252760Y-114391609D01* +X193252758Y-114391607D01* +X193150039Y-114332302D01* +X193150040Y-114332302D01* +X193136501Y-114328674D01* +X193035459Y-114301600D01* +X192916841Y-114301600D01* +X192846717Y-114320389D01* +X192802259Y-114332302D01* +X192699541Y-114391607D01* +X192615657Y-114475491D01* +X192556352Y-114578209D01* +X192556351Y-114578214D01* +X192525650Y-114692791D01* +X185702250Y-114692791D01* +X185702250Y-114575791D01* +X185671549Y-114461214D01* +X185671547Y-114461211D01* +X185671547Y-114461209D01* +X185612242Y-114358491D01* +X185612240Y-114358489D01* +X185612239Y-114358487D01* +X185528363Y-114274611D01* +X185528360Y-114274609D01* +X185528358Y-114274607D01* +X185425639Y-114215302D01* +X185425640Y-114215302D01* +X185412101Y-114211674D01* +X185311059Y-114184600D01* +X185192441Y-114184600D01* +X185122317Y-114203389D01* +X185077859Y-114215302D01* +X184975141Y-114274607D01* +X184891257Y-114358491D01* +X184831952Y-114461209D01* +X184828125Y-114475491D01* +X184801250Y-114575791D01* +X173635287Y-114575791D01* +X172031519Y-112972023D01* +X171975374Y-112934509D01* +X171924974Y-112900833D01* +X171806594Y-112851799D01* +X171680921Y-112826801D01* +X171680919Y-112826801D01* +X171552781Y-112826801D01* +X171552778Y-112826801D01* +X171427106Y-112851799D01* +X171427104Y-112851799D01* +X171308725Y-112900833D01* +X171202184Y-112972020D01* +X171111570Y-113062634D01* +X171040383Y-113169175D01* +X170991349Y-113287554D01* +X170991349Y-113287556D01* +X170966351Y-113413228D01* +X127083332Y-113413228D01* +X127084650Y-113408309D01* +X127084650Y-113289691D01* +X127053949Y-113175114D01* +X127053947Y-113175111D01* +X127053947Y-113175109D01* +X126994642Y-113072391D01* +X126994640Y-113072389D01* +X126994639Y-113072387D01* +X126910763Y-112988511D01* +X126910760Y-112988509D01* +X126910758Y-112988507D01* +X126808039Y-112929202D01* +X126808040Y-112929202D01* +X126794501Y-112925574D01* +X126693459Y-112898500D01* +X126574841Y-112898500D01* +X126504717Y-112917289D01* +X126460259Y-112929202D01* +X126357541Y-112988507D01* +X126273657Y-113072391D01* +X126214352Y-113175109D01* +X126214351Y-113175114D01* +X126183650Y-113289691D01* +X111384874Y-113289691D01* +X111389149Y-113282286D01* +X111419850Y-113167709D01* +X111419850Y-113053168D01* +X111438757Y-112994977D01* +X111448846Y-112983164D01* +X112776520Y-111655491D01* +X126164550Y-111655491D01* +X126164550Y-111774109D01* +X126175698Y-111815713D01* +X126195252Y-111888690D01* +X126254557Y-111991408D01* +X126254559Y-111991410D01* +X126254561Y-111991413D01* +X126338437Y-112075289D01* +X126338439Y-112075290D01* +X126338441Y-112075292D01* +X126441160Y-112134597D01* +X126441161Y-112134597D01* +X126441164Y-112134599D01* +X126555741Y-112165300D01* +X126555743Y-112165300D01* +X126674357Y-112165300D01* +X126674359Y-112165300D01* +X126788936Y-112134599D01* +X126788938Y-112134597D01* +X126788940Y-112134597D01* +X126891658Y-112075292D01* +X126891658Y-112075291D01* +X126891663Y-112075289D01* +X126975539Y-111991413D01* +X127003324Y-111943289D01* +X127034847Y-111888690D01* +X127034847Y-111888688D01* +X127034849Y-111888686D01* +X127065550Y-111774109D01* +X127065550Y-111655491D01* +X127034849Y-111540914D01* +X127034847Y-111540911D01* +X127034847Y-111540909D01* +X126975542Y-111438191D01* +X126975540Y-111438189D01* +X126975539Y-111438187D01* +X126891663Y-111354311D01* +X126891660Y-111354309D01* +X126891658Y-111354307D01* +X126788939Y-111295002D01* +X126788940Y-111295002D01* +X126775401Y-111291374D01* +X126674359Y-111264300D01* +X126555741Y-111264300D01* +X126485617Y-111283089D01* +X126441159Y-111295002D01* +X126338441Y-111354307D01* +X126254557Y-111438191D01* +X126195252Y-111540909D01* +X126195251Y-111540914D01* +X126164550Y-111655491D01* +X112776520Y-111655491D01* +X112853013Y-111578998D01* +X113434515Y-110997496D01* +X113489032Y-110969719D01* +X113504519Y-110968500D01* +X131651884Y-110968500D01* +X131710075Y-110987407D01* +X131746039Y-111036907D01* +X131746039Y-111098093D01* +X131737620Y-111117000D01* +X131721852Y-111144309D01* +X131712662Y-111178607D01* +X131691150Y-111258891D01* +X131691150Y-111377509D01* +X131699564Y-111408909D01* +X131721852Y-111492090D01* +X131781157Y-111594808D01* +X131781159Y-111594810D01* +X131781161Y-111594813D01* +X131865037Y-111678689D01* +X131865039Y-111678690D01* +X131865041Y-111678692D01* +X131967760Y-111737997D01* +X131967761Y-111737997D01* +X131967764Y-111737999D01* +X132082341Y-111768700D01* +X132082343Y-111768700D01* +X132200957Y-111768700D01* +X132200959Y-111768700D01* +X132315536Y-111737999D01* +X132315538Y-111737997D01* +X132315540Y-111737997D01* +X132418258Y-111678692D01* +X132418258Y-111678691D01* +X132418263Y-111678689D01* +X132502139Y-111594813D01* +X132543317Y-111523491D01* +X132561447Y-111492090D01* +X132561447Y-111492088D01* +X132561449Y-111492086D01* +X132592150Y-111377509D01* +X132592150Y-111258891D01* +X132561449Y-111144314D01* +X132561447Y-111144311D01* +X132561447Y-111144309D01* +X132502142Y-111041591D01* +X132502140Y-111041589D01* +X132502139Y-111041587D01* +X132418263Y-110957711D01* +X132418260Y-110957709D01* +X132418258Y-110957707D01* +X132315539Y-110898402D01* +X132315535Y-110898400D01* +X132251719Y-110881300D01* +X132200405Y-110847976D01* +X132178479Y-110790854D01* +X132194315Y-110731754D01* +X132207334Y-110715675D01* +X132438018Y-110484991D01* +X196440450Y-110484991D01* +X196440450Y-110603609D01* +X196457750Y-110668172D01* +X196471152Y-110718190D01* +X196530457Y-110820908D01* +X196530459Y-110820910D01* +X196530461Y-110820913D01* +X196614337Y-110904789D01* +X196614339Y-110904790D01* +X196614341Y-110904792D01* +X196717060Y-110964097D01* +X196717061Y-110964097D01* +X196717064Y-110964099D01* +X196831641Y-110994800D01* +X196831643Y-110994800D01* +X196950257Y-110994800D01* +X196950259Y-110994800D01* +X197064836Y-110964099D01* +X197064838Y-110964097D01* +X197064840Y-110964097D01* +X197167558Y-110904792D01* +X197167558Y-110904791D01* +X197167563Y-110904789D01* +X197251439Y-110820913D01* +X197268794Y-110790854D01* +X197310747Y-110718190D01* +X197310747Y-110718188D01* +X197310749Y-110718186D01* +X197341450Y-110603609D01* +X197341450Y-110484991D01* +X197310749Y-110370414D01* +X197310747Y-110370411D01* +X197310747Y-110370409D01* +X197251442Y-110267691D01* +X197251440Y-110267689D01* +X197251439Y-110267687D01* +X197167563Y-110183811D01* +X197167560Y-110183809D01* +X197167558Y-110183807D01* +X197064839Y-110124502D01* +X197064840Y-110124502D01* +X197051301Y-110120874D01* +X196950259Y-110093800D01* +X196831641Y-110093800D01* +X196761517Y-110112589D01* +X196717059Y-110124502D01* +X196614341Y-110183807D01* +X196530457Y-110267691D01* +X196471152Y-110370409D01* +X196471151Y-110370414D01* +X196440450Y-110484991D01* +X132438018Y-110484991D01* +X133484019Y-109438991D01* +X181023850Y-109438991D01* +X181023850Y-109557609D01* +X181050924Y-109658651D01* +X181054552Y-109672190D01* +X181113857Y-109774908D01* +X181113859Y-109774910D01* +X181113861Y-109774913D01* +X181197737Y-109858789D01* +X181197739Y-109858790D01* +X181197741Y-109858792D01* +X181300460Y-109918097D01* +X181300461Y-109918097D01* +X181300464Y-109918099D01* +X181415041Y-109948800D01* +X181415043Y-109948800D01* +X181533657Y-109948800D01* +X181533659Y-109948800D01* +X181648236Y-109918099D01* +X181648238Y-109918097D01* +X181648240Y-109918097D01* +X181750958Y-109858792D01* +X181750958Y-109858791D01* +X181750963Y-109858789D01* +X181834839Y-109774913D01* +X181834842Y-109774908D01* +X181894147Y-109672190D01* +X181894147Y-109672188D01* +X181894149Y-109672186D01* +X181924850Y-109557609D01* +X181924850Y-109438991D01* +X181894149Y-109324414D01* +X181894147Y-109324411D01* +X181894147Y-109324409D01* +X181834842Y-109221691D01* +X181834840Y-109221689D01* +X181834839Y-109221687D01* +X181750963Y-109137811D01* +X181750960Y-109137809D01* +X181750958Y-109137807D01* +X181648239Y-109078502D01* +X181648240Y-109078502D01* +X181634701Y-109074874D01* +X181533659Y-109047800D01* +X181415041Y-109047800D01* +X181344917Y-109066589D01* +X181300459Y-109078502D01* +X181197741Y-109137807D01* +X181113857Y-109221691D01* +X181054552Y-109324409D01* +X181054551Y-109324414D01* +X181023850Y-109438991D01* +X133484019Y-109438991D01* +X134610515Y-108312496D01* +X134665032Y-108284719D01* +X134680519Y-108283500D01* +X163988841Y-108283500D01* +X164047032Y-108302407D01* +X164082996Y-108351907D01* +X164082996Y-108413093D01* +X164058846Y-108452501D01* +X164038761Y-108472587D01* +X164038758Y-108472590D01* +X164038757Y-108472591D01* +X163979452Y-108575309D01* +X163964825Y-108629900D01* +X163948750Y-108689891D01* +X163948750Y-108808509D01* +X163975009Y-108906509D01* +X163979452Y-108923090D01* +X164038757Y-109025808D01* +X164038759Y-109025810D01* +X164038761Y-109025813D01* +X164122637Y-109109689D01* +X164122639Y-109109690D01* +X164122641Y-109109692D01* +X164225360Y-109168997D01* +X164225361Y-109168997D01* +X164225364Y-109168999D01* +X164339941Y-109199700D01* +X164339943Y-109199700D01* +X164458557Y-109199700D01* +X164458559Y-109199700D01* +X164573136Y-109168999D01* +X164573138Y-109168997D01* +X164573140Y-109168997D01* +X164675858Y-109109692D01* +X164675858Y-109109691D01* +X164675863Y-109109689D01* +X164759739Y-109025813D01* +X164819049Y-108923086D01* +X164849750Y-108808509D01* +X164849750Y-108689891D01* +X164819049Y-108575314D01* +X164819047Y-108575311D01* +X164819047Y-108575309D01* +X164759742Y-108472591D01* +X164759740Y-108472589D01* +X164759739Y-108472587D01* +X164739653Y-108452501D01* +X164711878Y-108397987D01* +X164721449Y-108337555D01* +X164764714Y-108294290D01* +X164809659Y-108283500D01* +X173519341Y-108283500D01* +X173577532Y-108302407D01* +X173589338Y-108312490D01* +X173670337Y-108393489D01* +X173670339Y-108393490D01* +X173670341Y-108393492D01* +X173773060Y-108452797D01* +X173773061Y-108452797D01* +X173773064Y-108452799D01* +X173887641Y-108483500D01* +X173887643Y-108483500D01* +X174006257Y-108483500D01* +X174006259Y-108483500D01* +X174120836Y-108452799D01* +X174120838Y-108452797D01* +X174120840Y-108452797D01* +X174223558Y-108393492D01* +X174223558Y-108393491D01* +X174223563Y-108393489D01* +X174307439Y-108309613D01* +X174307442Y-108309608D01* +X174366747Y-108206890D01* +X174366747Y-108206888D01* +X174366749Y-108206886D01* +X174397450Y-108092309D01* +X174397450Y-107973691D01* +X174366749Y-107859114D01* +X174347111Y-107825100D01* +X174334390Y-107765251D01* +X174359277Y-107709356D01* +X174412265Y-107678763D01* +X174432848Y-107676600D01* +X176941541Y-107676600D01* +X176999732Y-107695507D01* +X177011538Y-107705590D01* +X177092537Y-107786589D01* +X177092539Y-107786590D01* +X177092541Y-107786592D01* +X177195260Y-107845897D01* +X177195261Y-107845897D01* +X177195264Y-107845899D01* +X177309841Y-107876600D01* +X177309843Y-107876600D01* +X177428457Y-107876600D01* +X177428459Y-107876600D01* +X177543036Y-107845899D01* +X177543038Y-107845897D01* +X177543040Y-107845897D01* +X177645758Y-107786592D01* +X177645758Y-107786591D01* +X177645763Y-107786589D01* +X177729639Y-107702713D01* +X177729642Y-107702708D01* +X177755344Y-107658191D01* +X186691150Y-107658191D01* +X186691150Y-107776809D01* +X186704090Y-107825100D01* +X186721852Y-107891390D01* +X186781157Y-107994108D01* +X186781159Y-107994110D01* +X186781161Y-107994113D01* +X186865037Y-108077989D01* +X186865039Y-108077990D01* +X186865041Y-108077992D01* +X186967760Y-108137297D01* +X186967761Y-108137297D01* +X186967764Y-108137299D01* +X187082341Y-108168000D01* +X187082343Y-108168000D01* +X187200957Y-108168000D01* +X187200959Y-108168000D01* +X187315536Y-108137299D01* +X187315538Y-108137297D01* +X187315540Y-108137297D01* +X187418258Y-108077992D01* +X187418258Y-108077991D01* +X187418263Y-108077989D01* +X187502139Y-107994113D01* +X187560741Y-107892613D01* +X187561447Y-107891390D01* +X187561447Y-107891388D01* +X187561449Y-107891386D01* +X187592150Y-107776809D01* +X187592150Y-107658191D01* +X187564953Y-107556691D01* +X188241150Y-107556691D01* +X188241150Y-107675309D01* +X188250273Y-107709356D01* +X188271852Y-107789890D01* +X188331157Y-107892608D01* +X188331159Y-107892610D01* +X188331161Y-107892613D01* +X188415037Y-107976489D01* +X188415039Y-107976490D01* +X188415041Y-107976492D01* +X188517760Y-108035797D01* +X188517761Y-108035797D01* +X188517764Y-108035799D01* +X188632341Y-108066500D01* +X188632343Y-108066500D01* +X188750957Y-108066500D01* +X188750959Y-108066500D01* +X188865536Y-108035799D01* +X188865538Y-108035797D01* +X188865540Y-108035797D01* +X188968258Y-107976492D01* +X188968258Y-107976491D01* +X188968263Y-107976489D01* +X189052139Y-107892613D01* +X189052845Y-107891390D01* +X189111447Y-107789890D01* +X189111447Y-107789888D01* +X189111449Y-107789886D01* +X189142150Y-107675309D01* +X189142150Y-107556691D01* +X189111449Y-107442114D01* +X189111447Y-107442111D01* +X189111447Y-107442109D01* +X189052142Y-107339391D01* +X189052140Y-107339389D01* +X189052139Y-107339387D01* +X188968263Y-107255511D01* +X188968260Y-107255509D01* +X188968258Y-107255507D01* +X188865539Y-107196202D01* +X188865540Y-107196202D01* +X188852001Y-107192574D01* +X188750959Y-107165500D01* +X188632341Y-107165500D01* +X188594648Y-107175600D01* +X188517759Y-107196202D01* +X188415041Y-107255507D01* +X188331157Y-107339391D01* +X188271852Y-107442109D01* +X188260250Y-107485409D01* +X188241150Y-107556691D01* +X187564953Y-107556691D01* +X187561449Y-107543614D01* +X187561446Y-107543609D01* +X187502142Y-107440891D01* +X187502140Y-107440889D01* +X187502139Y-107440887D01* +X187418263Y-107357011D01* +X187418260Y-107357009D01* +X187418258Y-107357007D01* +X187315539Y-107297702D01* +X187315540Y-107297702D01* +X187302001Y-107294074D01* +X187200959Y-107267000D01* +X187082341Y-107267000D01* +X187012217Y-107285789D01* +X186967759Y-107297702D01* +X186865041Y-107357007D01* +X186781157Y-107440891D01* +X186721852Y-107543609D01* +X186713220Y-107575824D01* +X186691150Y-107658191D01* +X177755344Y-107658191D01* +X177787670Y-107602202D01* +X177787670Y-107602201D01* +X177787672Y-107602198D01* +X177787819Y-107601942D01* +X177788949Y-107599986D01* +X177819650Y-107485409D01* +X177819650Y-107366791D01* +X177788949Y-107252214D01* +X177788947Y-107252211D01* +X177788947Y-107252209D01* +X177729642Y-107149491D01* +X177729640Y-107149489D01* +X177729639Y-107149487D01* +X177645763Y-107065611D01* +X177645760Y-107065609D01* +X177645758Y-107065607D01* +X177543039Y-107006302D01* +X177543040Y-107006302D01* +X177529501Y-107002674D01* +X177428459Y-106975600D01* +X177309841Y-106975600D01* +X177239717Y-106994389D01* +X177195259Y-107006302D01* +X177092541Y-107065607D01* +X177092540Y-107065608D01* +X177092537Y-107065610D01* +X177092537Y-107065611D01* +X177011542Y-107146605D01* +X176957028Y-107174381D01* +X176941541Y-107175600D01* +X100217459Y-107175600D01* +X100159268Y-107156693D01* +X100147461Y-107146609D01* +X100066463Y-107065611D01* +X100066460Y-107065609D01* +X100066458Y-107065607D01* +X99963739Y-107006302D01* +X99963740Y-107006302D01* +X99950201Y-107002674D01* +X99849159Y-106975600D01* +X99730541Y-106975600D01* +X99660417Y-106994389D01* +X99615959Y-107006302D01* +X99513241Y-107065607D01* +X99429357Y-107149491D01* +X99370052Y-107252209D01* +X99366089Y-107267000D01* +X99339350Y-107366791D01* +X99339350Y-107485409D01* +X99354945Y-107543609D01* +X99370052Y-107599990D01* +X99429357Y-107702708D01* +X99429359Y-107702710D01* +X99429361Y-107702713D01* +X99513237Y-107786589D01* +X99513239Y-107786590D01* +X99513241Y-107786592D01* +X99615960Y-107845897D01* +X99615961Y-107845897D01* +X99615964Y-107845899D01* +X99730541Y-107876600D01* +X99730543Y-107876600D01* +X99849157Y-107876600D01* +X99849159Y-107876600D01* +X99963736Y-107845899D01* +X99963738Y-107845897D01* +X99963740Y-107845897D01* +X100066458Y-107786592D01* +X100066458Y-107786591D01* +X100066463Y-107786589D01* +X100147457Y-107705594D01* +X100201972Y-107677819D01* +X100217459Y-107676600D01* +X134298882Y-107676600D01* +X134357073Y-107695507D01* +X134393037Y-107745007D01* +X134393037Y-107806193D01* +X134368887Y-107845601D01* +X133056136Y-109158353D01* +X131775985Y-110438504D01* +X131721468Y-110466281D01* +X131705981Y-110467500D01* +X117294820Y-110467500D01* +X117236629Y-110448593D01* +X117200665Y-110399093D01* +X117200665Y-110337907D01* +X117236629Y-110288407D01* +X117256937Y-110277035D01* +X117257068Y-110276980D01* +X117258197Y-110276513D01* +X117405685Y-110177964D01* +X117531114Y-110052535D01* +X117629663Y-109905047D01* +X117697544Y-109741166D01* +X117732150Y-109567191D01* +X117732150Y-109389809D01* +X117697544Y-109215834D01* +X117640660Y-109078502D01* +X117629664Y-109051955D01* +X117629664Y-109051954D01* +X117531114Y-108904465D01* +X117405684Y-108779035D01* +X117258194Y-108680485D01* +X117094316Y-108612606D01* +X116920343Y-108578000D01* +X116920341Y-108578000D01* +X93549341Y-108578000D01* +X93371958Y-108578000D01* +X93371955Y-108578000D01* +X93288440Y-108594613D01* +X93197984Y-108612606D01* +X93197982Y-108612606D01* +X93034105Y-108680485D01* +X93034104Y-108680485D01* +X92886615Y-108779035D01* +X92886614Y-108779037D01* +X92886613Y-108779037D01* +X92688983Y-108976665D01* +X92634467Y-109004442D01* +X92574034Y-108994870D01* +X92530770Y-108951606D01* +X92523355Y-108932290D01* +X92516449Y-108906514D01* +X92515266Y-108904465D01* +X92457142Y-108803791D01* +X92457140Y-108803789D01* +X92457139Y-108803787D01* +X92373263Y-108719911D01* +X92373260Y-108719909D01* +X92373258Y-108719907D01* +X92270539Y-108660602D01* +X92270540Y-108660602D01* +X92257001Y-108656974D01* +X92155959Y-108629900D01* +X92037341Y-108629900D01* +X91967217Y-108648689D01* +X91922759Y-108660602D01* +X91820041Y-108719907D01* +X91736157Y-108803791D01* +X91676852Y-108906509D01* +X91663961Y-108954618D01* +X91646150Y-109021091D01* +X80830859Y-109021091D01* +X80830113Y-108283500D01* +X80828085Y-106277391D01* +X105030450Y-106277391D01* +X105030450Y-106396009D01* +X105056975Y-106495000D01* +X105061152Y-106510590D01* +X105120457Y-106613308D01* +X105120459Y-106613310D01* +X105120461Y-106613313D01* +X105204337Y-106697189D01* +X105204339Y-106697190D01* +X105204341Y-106697192D01* +X105307060Y-106756497D01* +X105307061Y-106756497D01* +X105307064Y-106756499D01* +X105421641Y-106787200D01* +X105421643Y-106787200D01* +X105540257Y-106787200D01* +X105540259Y-106787200D01* +X105654836Y-106756499D01* +X105654838Y-106756497D01* +X105654840Y-106756497D01* +X105757558Y-106697192D01* +X105757558Y-106697191D01* +X105757563Y-106697189D01* +X105841439Y-106613313D01* +X105900749Y-106510586D01* +X105931450Y-106396009D01* +X105931450Y-106277391D01* +X105900749Y-106162814D01* +X105900747Y-106162811D01* +X105900747Y-106162809D01* +X105841442Y-106060091D01* +X105841440Y-106060089D01* +X105841439Y-106060087D01* +X105766543Y-105985191D01* +X112741150Y-105985191D01* +X112741150Y-106103809D01* +X112767781Y-106203195D01* +X112771852Y-106218390D01* +X112831157Y-106321108D01* +X112831159Y-106321110D01* +X112831161Y-106321113D01* +X112915037Y-106404989D01* +X112915039Y-106404990D01* +X112915041Y-106404992D01* +X113017760Y-106464297D01* +X113017761Y-106464297D01* +X113017764Y-106464299D01* +X113132341Y-106495000D01* +X113132343Y-106495000D01* +X113250957Y-106495000D01* +X113250959Y-106495000D01* +X113365536Y-106464299D01* +X113365538Y-106464297D01* +X113365540Y-106464297D01* +X113468258Y-106404992D01* +X113468258Y-106404991D01* +X113468263Y-106404989D01* +X113552139Y-106321113D01* +X113611449Y-106218386D01* +X113642150Y-106103809D01* +X113642150Y-105985191D01* +X113611449Y-105870614D01* +X113611447Y-105870611D01* +X113611447Y-105870609D01* +X113552142Y-105767891D01* +X113552140Y-105767889D01* +X113552139Y-105767887D01* +X113468263Y-105684011D01* +X113468260Y-105684009D01* +X113468258Y-105684007D01* +X113365539Y-105624702D01* +X113365540Y-105624702D01* +X113352001Y-105621074D01* +X113250959Y-105594000D01* +X113132341Y-105594000D01* +X113062217Y-105612789D01* +X113017759Y-105624702D01* +X112915041Y-105684007D01* +X112831157Y-105767891D01* +X112771852Y-105870609D01* +X112759448Y-105916901D01* +X112741150Y-105985191D01* +X105766543Y-105985191D01* +X105757563Y-105976211D01* +X105757560Y-105976209D01* +X105757558Y-105976207D01* +X105654839Y-105916902D01* +X105654840Y-105916902D01* +X105641301Y-105913274D01* +X105540259Y-105886200D01* +X105421641Y-105886200D01* +X105351517Y-105904989D01* +X105307059Y-105916902D01* +X105204341Y-105976207D01* +X105120457Y-106060091D01* +X105061152Y-106162809D01* +X105061151Y-106162814D01* +X105030450Y-106277391D01* +X80828085Y-106277391D01* +X80828079Y-106271002D01* +X80827134Y-105336491D01* +X115292950Y-105336491D01* +X115292950Y-105455109D01* +X115306848Y-105506977D01* +X115323652Y-105569690D01* +X115382957Y-105672408D01* +X115382959Y-105672410D01* +X115382961Y-105672413D01* +X115466837Y-105756289D01* +X115466839Y-105756290D01* +X115466841Y-105756292D01* +X115569560Y-105815597D01* +X115569561Y-105815597D01* +X115569564Y-105815599D01* +X115684141Y-105846300D01* +X115684143Y-105846300D01* +X115802757Y-105846300D01* +X115802759Y-105846300D01* +X115917336Y-105815599D01* +X115917338Y-105815597D01* +X115917340Y-105815597D01* +X116020058Y-105756292D01* +X116020058Y-105756291D01* +X116020063Y-105756289D01* +X116103939Y-105672413D01* +X116161278Y-105573100D01* +X116163247Y-105569690D01* +X116163247Y-105569688D01* +X116163249Y-105569686D01* +X116193950Y-105455109D01* +X116193950Y-105336491D01* +X116163249Y-105221914D01* +X116163247Y-105221911D01* +X116163247Y-105221909D01* +X116103942Y-105119191D01* +X116103940Y-105119189D01* +X116103939Y-105119187D01* +X116020063Y-105035311D01* +X116020060Y-105035309D01* +X116020058Y-105035307D01* +X115917339Y-104976002D01* +X115917340Y-104976002D01* +X115903801Y-104972374D01* +X115802759Y-104945300D01* +X115684141Y-104945300D01* +X115614017Y-104964089D01* +X115569559Y-104976002D01* +X115466841Y-105035307D01* +X115382957Y-105119191D01* +X115323652Y-105221909D01* +X115323651Y-105221914D01* +X115292950Y-105336491D01* +X80827134Y-105336491D01* +X80827128Y-105330102D01* +X80825783Y-104000191D01* +X90646250Y-104000191D01* +X90646250Y-104118809D01* +X90670613Y-104209732D01* +X90676952Y-104233390D01* +X90736257Y-104336108D01* +X90736259Y-104336110D01* +X90736261Y-104336113D01* +X90820137Y-104419989D01* +X90820139Y-104419990D01* +X90820141Y-104419992D01* +X90922860Y-104479297D01* +X90922861Y-104479297D01* +X90922864Y-104479299D01* +X91037441Y-104510000D01* +X91037443Y-104510000D01* +X91156057Y-104510000D01* +X91156059Y-104510000D01* +X91270636Y-104479299D01* +X91270638Y-104479297D01* +X91270640Y-104479297D01* +X91373358Y-104419992D01* +X91373358Y-104419991D01* +X91373363Y-104419989D01* +X91457239Y-104336113D01* +X91461986Y-104327891D01* +X91516547Y-104233390D01* +X91516547Y-104233388D01* +X91516549Y-104233386D01* +X91547250Y-104118809D01* +X91547250Y-104000191D01* +X91516549Y-103885614D01* +X91516547Y-103885611D01* +X91516547Y-103885609D01* +X91457242Y-103782891D01* +X91457240Y-103782889D01* +X91457239Y-103782887D01* +X91373363Y-103699011D01* +X91373360Y-103699009D01* +X91373358Y-103699007D01* +X91270639Y-103639702D01* +X91270640Y-103639702D01* +X91257101Y-103636074D01* +X91156059Y-103609000D01* +X91037441Y-103609000D01* +X90979274Y-103624586D01* +X90922859Y-103639702D01* +X90820141Y-103699007D01* +X90736257Y-103782891D01* +X90676952Y-103885609D01* +X90672132Y-103903598D01* +X90646250Y-104000191D01* +X80825783Y-104000191D01* +X80825777Y-103993802D01* +X80825168Y-103391391D01* +X99022950Y-103391391D01* +X99022950Y-103510009D01* +X99044089Y-103588900D01* +X99053652Y-103624590D01* +X99112957Y-103727308D01* +X99112959Y-103727310D01* +X99112961Y-103727313D01* +X99196837Y-103811189D01* +X99196839Y-103811190D01* +X99196841Y-103811192D01* +X99299560Y-103870497D01* +X99299561Y-103870497D01* +X99299564Y-103870499D01* +X99414141Y-103901200D01* +X99414143Y-103901200D01* +X99532757Y-103901200D01* +X99532759Y-103901200D01* +X99647336Y-103870499D01* +X99647338Y-103870497D01* +X99647340Y-103870497D01* +X99750058Y-103811192D01* +X99750058Y-103811191D01* +X99750063Y-103811189D01* +X99833939Y-103727313D01* +X99861884Y-103678911D01* +X99893247Y-103624590D01* +X99893247Y-103624588D01* +X99893249Y-103624586D01* +X99923950Y-103510009D01* +X99923950Y-103395468D01* +X99942857Y-103337277D01* +X99952946Y-103325464D01* +X100775215Y-102503196D01* +X100829732Y-102475419D01* +X100845219Y-102474200D01* +X113794427Y-102474200D01* +X113852618Y-102493107D01* +X113888582Y-102542607D01* +X113888582Y-102603793D01* +X113852618Y-102653293D01* +X113820052Y-102668825D01* +X113764956Y-102683589D01* +X113727959Y-102693502D01* +X113625241Y-102752807D01* +X113541357Y-102836691D01* +X113482052Y-102939409D01* +X113466090Y-102998981D01* +X113451350Y-103053991D01* +X113451350Y-103172609D01* +X113465524Y-103225507D01* +X113482052Y-103287190D01* +X113541357Y-103389908D01* +X113541359Y-103389910D01* +X113541361Y-103389913D01* +X113625237Y-103473789D01* +X113625239Y-103473790D01* +X113625241Y-103473792D01* +X113727960Y-103533097D01* +X113727961Y-103533097D01* +X113727964Y-103533099D01* +X113842541Y-103563800D01* +X113842543Y-103563800D01* +X113961157Y-103563800D01* +X113961159Y-103563800D01* +X114075736Y-103533099D01* +X114075738Y-103533097D01* +X114075740Y-103533097D01* +X114086835Y-103526691D01* +X132979050Y-103526691D01* +X132979050Y-103645309D01* +X133001022Y-103727308D01* +X133009752Y-103759890D01* +X133069057Y-103862608D01* +X133069059Y-103862610D01* +X133069061Y-103862613D01* +X133152937Y-103946489D01* +X133152939Y-103946490D01* +X133152941Y-103946492D01* +X133255660Y-104005797D01* +X133255661Y-104005797D01* +X133255664Y-104005799D01* +X133370241Y-104036500D01* +X133370243Y-104036500D01* +X133488857Y-104036500D01* +X133488859Y-104036500D01* +X133603436Y-104005799D01* +X133603438Y-104005797D01* +X133603440Y-104005797D01* +X133647964Y-103980091D01* +X175616250Y-103980091D01* +X175616250Y-104098709D01* +X175621636Y-104118809D01* +X175646952Y-104213290D01* +X175706257Y-104316008D01* +X175706259Y-104316010D01* +X175706261Y-104316013D01* +X175790137Y-104399889D01* +X175790139Y-104399890D01* +X175790141Y-104399892D01* +X175892860Y-104459197D01* +X175892861Y-104459197D01* +X175892864Y-104459199D01* +X176007441Y-104489900D01* +X176007443Y-104489900D01* +X176126057Y-104489900D01* +X176126059Y-104489900D01* +X176240636Y-104459199D01* +X176240638Y-104459197D01* +X176240640Y-104459197D01* +X176343358Y-104399892D01* +X176343358Y-104399891D01* +X176343363Y-104399889D01* +X176427239Y-104316013D01* +X176432511Y-104306882D01* +X176486547Y-104213290D01* +X176486547Y-104213288D01* +X176486549Y-104213286D01* +X176517250Y-104098709D01* +X176517250Y-103980091D01* +X176486549Y-103865514D01* +X176486547Y-103865511D01* +X176486547Y-103865509D01* +X176427242Y-103762791D01* +X176427240Y-103762789D01* +X176427239Y-103762787D01* +X176343363Y-103678911D01* +X176343360Y-103678909D01* +X176343358Y-103678907D01* +X176240639Y-103619602D01* +X176240640Y-103619602D01* +X176223219Y-103614934D01* +X176126059Y-103588900D01* +X176007441Y-103588900D01* +X175937317Y-103607689D01* +X175892859Y-103619602D01* +X175790141Y-103678907D01* +X175706257Y-103762791D01* +X175646952Y-103865509D01* +X175641565Y-103885614D01* +X175616250Y-103980091D01* +X133647964Y-103980091D01* +X133706158Y-103946492D01* +X133706158Y-103946491D01* +X133706163Y-103946489D01* +X133790039Y-103862613D01* +X133836067Y-103782891D01* +X133849347Y-103759890D01* +X133849347Y-103759888D01* +X133849349Y-103759886D01* +X133880050Y-103645309D01* +X133880050Y-103526691D01* +X133849349Y-103412114D01* +X133849347Y-103412111D01* +X133849347Y-103412109D01* +X133790042Y-103309391D01* +X133790040Y-103309389D01* +X133790039Y-103309387D01* +X133706163Y-103225511D01* +X133706160Y-103225509D01* +X133706158Y-103225507D01* +X133603439Y-103166202D01* +X133603440Y-103166202D01* +X133589901Y-103162574D01* +X133488859Y-103135500D01* +X133370241Y-103135500D01* +X133300117Y-103154289D01* +X133255659Y-103166202D01* +X133152941Y-103225507D01* +X133069057Y-103309391D01* +X133009752Y-103412109D01* +X132999546Y-103450198D01* +X132979050Y-103526691D01* +X114086835Y-103526691D01* +X114178458Y-103473792D01* +X114178458Y-103473791D01* +X114178463Y-103473789D01* +X114262339Y-103389913D01* +X114262342Y-103389908D01* +X114321647Y-103287190D01* +X114321647Y-103287188D01* +X114321649Y-103287186D01* +X114352350Y-103172609D01* +X114352350Y-103053991D01* +X114321649Y-102939414D01* +X114321647Y-102939411D01* +X114321647Y-102939409D01* +X114262342Y-102836691D01* +X114262340Y-102836689D01* +X114262339Y-102836687D01* +X114178463Y-102752811D01* +X114178460Y-102752809D01* +X114178458Y-102752807D01* +X114075739Y-102693502D01* +X114075740Y-102693502D01* +X114064535Y-102690499D01* +X113983648Y-102668826D01* +X113932335Y-102635503D01* +X113910409Y-102578381D01* +X113926245Y-102519281D01* +X113973795Y-102480775D01* +X114009273Y-102474200D01* +X171969479Y-102474200D01* +X172027535Y-102450151D01* +X172061547Y-102436064D01* +X172233820Y-102263791D01* +X188219250Y-102263791D01* +X188219250Y-102382409D01* +X188244172Y-102475419D01* +X188249952Y-102496990D01* +X188309257Y-102599708D01* +X188309259Y-102599710D01* +X188309261Y-102599713D01* +X188393137Y-102683589D01* +X188393139Y-102683590D01* +X188393141Y-102683592D01* +X188495860Y-102742897D01* +X188495861Y-102742897D01* +X188495864Y-102742899D01* +X188610441Y-102773600D01* +X188610443Y-102773600D01* +X188729057Y-102773600D01* +X188729059Y-102773600D01* +X188843636Y-102742899D01* +X188843638Y-102742897D01* +X188843640Y-102742897D01* +X188946358Y-102683592D01* +X188946358Y-102683591D01* +X188946363Y-102683589D01* +X189030239Y-102599713D01* +X189061273Y-102545961D01* +X189089547Y-102496990D01* +X189089547Y-102496988D01* +X189089549Y-102496986D01* +X189120250Y-102382409D01* +X189120250Y-102263791D01* +X189089549Y-102149214D01* +X189089547Y-102149211D01* +X189089547Y-102149209D01* +X189030242Y-102046491D01* +X189030240Y-102046489D01* +X189030239Y-102046487D01* +X188946363Y-101962611D01* +X188946360Y-101962609D01* +X188946358Y-101962607D01* +X188843639Y-101903302D01* +X188843640Y-101903302D01* +X188830101Y-101899674D01* +X188729059Y-101872600D01* +X188610441Y-101872600D01* +X188540317Y-101891389D01* +X188495859Y-101903302D01* +X188393141Y-101962607D01* +X188309257Y-102046491D01* +X188249952Y-102149209D01* +X188232787Y-102213269D01* +X188219250Y-102263791D01* +X172233820Y-102263791D01* +X175558714Y-98938895D01* +X175613231Y-98911119D01* +X175628718Y-98909900D01* +X175743257Y-98909900D01* +X175743259Y-98909900D01* +X175857836Y-98879199D01* +X175857838Y-98879197D01* +X175857840Y-98879197D01* +X175960558Y-98819892D01* +X175960558Y-98819891D01* +X175960563Y-98819889D01* +X176044439Y-98736013D01* +X176103749Y-98633286D01* +X176134450Y-98518709D01* +X176134450Y-98400091D01* +X176103749Y-98285514D01* +X176103747Y-98285511D01* +X176103747Y-98285509D01* +X176044442Y-98182791D01* +X176044440Y-98182789D01* +X176044439Y-98182787D01* +X175960563Y-98098911D01* +X175960560Y-98098909D01* +X175960558Y-98098907D01* +X175857839Y-98039602D01* +X175857840Y-98039602D01* +X175844301Y-98035974D01* +X175743259Y-98008900D01* +X175624641Y-98008900D01* +X175554517Y-98027689D01* +X175510059Y-98039602D01* +X175407341Y-98098907D01* +X175323457Y-98182791D01* +X175264152Y-98285509D01* +X175233450Y-98400092D01* +X175233450Y-98514630D01* +X175214543Y-98572821D01* +X175204454Y-98584634D01* +X171844885Y-101944204D01* +X171790368Y-101971981D01* +X171774881Y-101973200D01* +X100650621Y-101973200D01* +X100558553Y-102011335D01* +X99598683Y-102971204D01* +X99544167Y-102998981D01* +X99528680Y-103000200D01* +X99414141Y-103000200D01* +X99344017Y-103018989D01* +X99299559Y-103030902D01* +X99196841Y-103090207D01* +X99112957Y-103174091D01* +X99053652Y-103276809D01* +X99044923Y-103309387D01* +X99022950Y-103391391D01* +X80825168Y-103391391D01* +X80825162Y-103385002D01* +X80824028Y-102263791D01* +X98675550Y-102263791D01* +X98675550Y-102382409D01* +X98700472Y-102475419D01* +X98706252Y-102496990D01* +X98765557Y-102599708D01* +X98765559Y-102599710D01* +X98765561Y-102599713D01* +X98849437Y-102683589D01* +X98849439Y-102683590D01* +X98849441Y-102683592D01* +X98952160Y-102742897D01* +X98952161Y-102742897D01* +X98952164Y-102742899D01* +X99066741Y-102773600D01* +X99066743Y-102773600D01* +X99185357Y-102773600D01* +X99185359Y-102773600D01* +X99299936Y-102742899D01* +X99299938Y-102742897D01* +X99299940Y-102742897D01* +X99402658Y-102683592D01* +X99402658Y-102683591D01* +X99402663Y-102683589D01* +X99486539Y-102599713D01* +X99517573Y-102545961D01* +X99545847Y-102496990D01* +X99545847Y-102496988D01* +X99545849Y-102496986D01* +X99576550Y-102382409D01* +X99576550Y-102263791D01* +X99545849Y-102149214D01* +X99545847Y-102149211D01* +X99545847Y-102149209D01* +X99486542Y-102046491D01* +X99486540Y-102046489D01* +X99486539Y-102046487D01* +X99402663Y-101962611D01* +X99402660Y-101962609D01* +X99402658Y-101962607D01* +X99299939Y-101903302D01* +X99299940Y-101903302D01* +X99286401Y-101899674D01* +X99185359Y-101872600D01* +X99066741Y-101872600D01* +X98996617Y-101891389D01* +X98952159Y-101903302D01* +X98849441Y-101962607D01* +X98765557Y-102046491D01* +X98706252Y-102149209D01* +X98689087Y-102213269D01* +X98675550Y-102263791D01* +X80824028Y-102263791D01* +X80824022Y-102257402D01* +X80822910Y-101158091D01* +X97923350Y-101158091D01* +X97923350Y-101276709D01* +X97950424Y-101377751D01* +X97954052Y-101391290D01* +X98013357Y-101494008D01* +X98013359Y-101494010D01* +X98013361Y-101494013D01* +X98097237Y-101577889D01* +X98097239Y-101577890D01* +X98097241Y-101577892D01* +X98199960Y-101637197D01* +X98199961Y-101637197D01* +X98199964Y-101637199D01* +X98314541Y-101667900D01* +X98314543Y-101667900D01* +X98433157Y-101667900D01* +X98433159Y-101667900D01* +X98547736Y-101637199D01* +X98547738Y-101637197D01* +X98547740Y-101637197D01* +X98650458Y-101577892D01* +X98650458Y-101577891D01* +X98650463Y-101577889D01* +X98734339Y-101494013D01* +X98793649Y-101391286D01* +X98824350Y-101276709D01* +X98824350Y-101158091D01* +X98793649Y-101043514D01* +X98793647Y-101043511D01* +X98793647Y-101043509D01* +X98734342Y-100940791D01* +X98734340Y-100940789D01* +X98734339Y-100940787D01* +X98650463Y-100856911D01* +X98650460Y-100856909D01* +X98650458Y-100856907D01* +X98547739Y-100797602D01* +X98547740Y-100797602D01* +X98534201Y-100793974D01* +X98433159Y-100766900D01* +X98314541Y-100766900D01* +X98244417Y-100785689D01* +X98199959Y-100797602D01* +X98097241Y-100856907D01* +X98013357Y-100940791D01* +X97954052Y-101043509D01* +X97954051Y-101043514D01* +X97923350Y-101158091D01* +X80822910Y-101158091D01* +X80822904Y-101151702D01* +X80822289Y-100543600D01* +X80821898Y-100156391D01* +X102139450Y-100156391D01* +X102139450Y-100275009D01* +X102166524Y-100376051D01* +X102170152Y-100389590D01* +X102229457Y-100492308D01* +X102229459Y-100492310D01* +X102229461Y-100492313D01* +X102313337Y-100576189D01* +X102313339Y-100576190D01* +X102313341Y-100576192D01* +X102416060Y-100635497D01* +X102416061Y-100635497D01* +X102416064Y-100635499D01* +X102530641Y-100666200D01* +X102530643Y-100666200D01* +X102649257Y-100666200D01* +X102649259Y-100666200D01* +X102763836Y-100635499D01* +X102763838Y-100635497D01* +X102763840Y-100635497D01* +X102866558Y-100576192D01* +X102866558Y-100576191D01* +X102866563Y-100576189D01* +X102950439Y-100492313D01* +X103009749Y-100389586D01* +X103040450Y-100275009D01* +X103040450Y-100156391D01* +X103009749Y-100041814D01* +X103009747Y-100041811D01* +X103009747Y-100041809D01* +X102950442Y-99939091D01* +X102950440Y-99939089D01* +X102950439Y-99939087D01* +X102866563Y-99855211D01* +X102866560Y-99855209D01* +X102866558Y-99855207D01* +X102763839Y-99795902D01* +X102763840Y-99795902D01* +X102724515Y-99785365D01* +X102649259Y-99765200D01* +X102530641Y-99765200D01* +X102460517Y-99783989D01* +X102416059Y-99795902D01* +X102313341Y-99855207D01* +X102229457Y-99939091D01* +X102170152Y-100041809D01* +X102170151Y-100041814D01* +X102139450Y-100156391D01* +X80821898Y-100156391D01* +X80818886Y-97176991D01* +X106053250Y-97176991D01* +X106053250Y-97295609D01* +X106078866Y-97391207D01* +X106083952Y-97410190D01* +X106143257Y-97512908D01* +X106143259Y-97512910D01* +X106143261Y-97512913D01* +X106227137Y-97596789D01* +X106227139Y-97596790D01* +X106227141Y-97596792D01* +X106329860Y-97656097D01* +X106329861Y-97656097D01* +X106329864Y-97656099D01* +X106444441Y-97686800D01* +X106444443Y-97686800D01* +X106563057Y-97686800D01* +X106563059Y-97686800D01* +X106677636Y-97656099D01* +X106677638Y-97656097D01* +X106677640Y-97656097D01* +X106780358Y-97596792D01* +X106780358Y-97596791D01* +X106780363Y-97596789D01* +X106864239Y-97512913D01* +X106904895Y-97442495D01* +X106923547Y-97410190D01* +X106923547Y-97410188D01* +X106923549Y-97410186D01* +X106954250Y-97295609D01* +X106954250Y-97176991D01* +X106923549Y-97062414D01* +X106923547Y-97062411D01* +X106923547Y-97062409D01* +X106864242Y-96959691D01* +X106864240Y-96959689D01* +X106864239Y-96959687D01* +X106780363Y-96875811D01* +X106780360Y-96875809D01* +X106780358Y-96875807D01* +X106677639Y-96816502D01* +X106677640Y-96816502D01* +X106635628Y-96805245D01* +X106563059Y-96785800D01* +X106444441Y-96785800D01* +X106374317Y-96804589D01* +X106329859Y-96816502D01* +X106227141Y-96875807D01* +X106143257Y-96959691D01* +X106083952Y-97062409D01* +X106070337Y-97113221D01* +X106053250Y-97176991D01* +X80818886Y-97176991D01* +X80817092Y-95402891D01* +X102470650Y-95402891D01* +X102470650Y-95521509D01* +X102491601Y-95599700D01* +X102501352Y-95636090D01* +X102560657Y-95738808D01* +X102560659Y-95738810D01* +X102560661Y-95738813D01* +X102644537Y-95822689D01* +X102644539Y-95822690D01* +X102644541Y-95822692D01* +X102747260Y-95881997D01* +X102747261Y-95881997D01* +X102747264Y-95881999D01* +X102861841Y-95912700D01* +X102861843Y-95912700D01* +X102980457Y-95912700D01* +X102980459Y-95912700D01* +X103095036Y-95881999D01* +X103095038Y-95881997D01* +X103095040Y-95881997D01* +X103197758Y-95822692D01* +X103197758Y-95822691D01* +X103197763Y-95822689D01* +X103281639Y-95738813D01* +X103322298Y-95668390D01* +X103340947Y-95636090D01* +X103340947Y-95636088D01* +X103340949Y-95636086D01* +X103371650Y-95521509D01* +X103371650Y-95402891D01* +X103340949Y-95288314D01* +X103340947Y-95288311D01* +X103340947Y-95288309D01* +X103281642Y-95185591D01* +X103281640Y-95185589D01* +X103281639Y-95185587D01* +X103197763Y-95101711D01* +X103197760Y-95101709D01* +X103197758Y-95101707D01* +X103095039Y-95042402D01* +X103095040Y-95042402D01* +X103064575Y-95034239D01* +X102980459Y-95011700D01* +X102861841Y-95011700D01* +X102791717Y-95030489D01* +X102747259Y-95042402D01* +X102644541Y-95101707D01* +X102560657Y-95185591D01* +X102501352Y-95288309D01* +X102487525Y-95339913D01* +X102470650Y-95402891D01* +X80817092Y-95402891D01* +X80814945Y-93278791D01* +X92916150Y-93278791D01* +X92916150Y-93397409D01* +X92935576Y-93469907D01* +X92946852Y-93511990D01* +X93006157Y-93614708D01* +X93006159Y-93614710D01* +X93006161Y-93614713D01* +X93090037Y-93698589D01* +X93090039Y-93698590D01* +X93090041Y-93698592D01* +X93192760Y-93757897D01* +X93192761Y-93757897D01* +X93192764Y-93757899D01* +X93307341Y-93788600D01* +X93307343Y-93788600D01* +X93425957Y-93788600D01* +X93425959Y-93788600D01* +X93540536Y-93757899D01* +X93540538Y-93757897D01* +X93540540Y-93757897D01* +X93643258Y-93698592D01* +X93643258Y-93698591D01* +X93643263Y-93698589D01* +X93727139Y-93614713D01* +X93738721Y-93594653D01* +X93786447Y-93511990D01* +X93786447Y-93511988D01* +X93786449Y-93511986D01* +X93817150Y-93397409D01* +X93817150Y-93294491D01* +X99030250Y-93294491D01* +X99030250Y-93413109D01* +X99056744Y-93511986D01* +X99060952Y-93527690D01* +X99120257Y-93630408D01* +X99120259Y-93630410D01* +X99120261Y-93630413D01* +X99204137Y-93714289D01* +X99204139Y-93714290D01* +X99204141Y-93714292D01* +X99306860Y-93773597D01* +X99306861Y-93773597D01* +X99306864Y-93773599D01* +X99421441Y-93804300D01* +X99421443Y-93804300D01* +X99540057Y-93804300D01* +X99540059Y-93804300D01* +X99654636Y-93773599D01* +X99654638Y-93773597D01* +X99654640Y-93773597D01* +X99757358Y-93714292D01* +X99757358Y-93714291D01* +X99757363Y-93714289D01* +X99841239Y-93630413D01* +X99844653Y-93624500D01* +X99900547Y-93527690D01* +X99900547Y-93527688D01* +X99900549Y-93527686D01* +X99931250Y-93413109D01* +X99931250Y-93294491D01* +X99900549Y-93179914D01* +X99900547Y-93179911D01* +X99900547Y-93179909D01* +X99841242Y-93077191D01* +X99841240Y-93077189D01* +X99841239Y-93077187D01* +X99757363Y-92993311D01* +X99757360Y-92993309D01* +X99757358Y-92993307D01* +X99654639Y-92934002D01* +X99654640Y-92934002D01* +X99639230Y-92929873D01* +X99540059Y-92903300D01* +X99421441Y-92903300D01* +X99351317Y-92922089D01* +X99306859Y-92934002D01* +X99204141Y-92993307D01* +X99120257Y-93077191D01* +X99060952Y-93179909D01* +X99043787Y-93243969D01* +X99030250Y-93294491D01* +X93817150Y-93294491D01* +X93817150Y-93278791D01* +X93786449Y-93164214D01* +X93786447Y-93164211D01* +X93786447Y-93164209D01* +X93727142Y-93061491D01* +X93727140Y-93061489D01* +X93727139Y-93061487D01* +X93643263Y-92977611D01* +X93643260Y-92977609D01* +X93643258Y-92977607D01* +X93540539Y-92918302D01* +X93540540Y-92918302D01* +X93494975Y-92906093D01* +X93425959Y-92887600D01* +X93307341Y-92887600D01* +X93248748Y-92903300D01* +X93192759Y-92918302D01* +X93090041Y-92977607D01* +X93006157Y-93061491D01* +X92946852Y-93164209D01* +X92936406Y-93203195D01* +X92916150Y-93278791D01* +X80814945Y-93278791D01* +X80805912Y-84342291D01* +X93698650Y-84342291D01* +X93698650Y-84460909D01* +X93716122Y-84526114D01* +X93729352Y-84575490D01* +X93788657Y-84678208D01* +X93788659Y-84678210D01* +X93788661Y-84678213D01* +X93872537Y-84762089D01* +X93872539Y-84762090D01* +X93872541Y-84762092D01* +X93975260Y-84821397D01* +X93975261Y-84821397D01* +X93975264Y-84821399D01* +X94089841Y-84852100D01* +X94089843Y-84852100D01* +X94208457Y-84852100D01* +X94208459Y-84852100D01* +X94323036Y-84821399D01* +X94323038Y-84821397D01* +X94323040Y-84821397D01* +X94425758Y-84762092D01* +X94425758Y-84762091D01* +X94425763Y-84762089D01* +X94509639Y-84678213D01* +X94552020Y-84604808D01* +X94568947Y-84575490D01* +X94568947Y-84575488D01* +X94568949Y-84575486D01* +X94599650Y-84460909D01* +X94599650Y-84342291D01* +X94568949Y-84227714D01* +X94568947Y-84227711D01* +X94568947Y-84227709D01* +X94509642Y-84124991D01* +X94509640Y-84124989D01* +X94509639Y-84124987D01* +X94425763Y-84041111D01* +X94425760Y-84041109D01* +X94425758Y-84041107D01* +X94323039Y-83981802D01* +X94323040Y-83981802D01* +X94309501Y-83978174D01* +X94208459Y-83951100D01* +X94089841Y-83951100D01* +X94022127Y-83969244D01* +X93975259Y-83981802D01* +X93872541Y-84041107D01* +X93788657Y-84124991D01* +X93729352Y-84227709D01* +X93716382Y-84276114D01* +X93698650Y-84342291D01* +X80805912Y-84342291D01* +X80795006Y-73553271D01* +X87491150Y-73553271D01* +X87491150Y-73652928D01* +X87529284Y-73744994D01* +X87529285Y-73744995D01* +X87529286Y-73744997D01* +X105762155Y-91977866D01* +X105789931Y-92032381D01* +X105791150Y-92047868D01* +X105791150Y-95512928D01* +X105829284Y-95604994D01* +X105829285Y-95604995D01* +X105829286Y-95604997D01* +X110659285Y-100434995D01* +X110659286Y-100434997D01* +X110729753Y-100505464D01* +X110767890Y-100521260D01* +X110807271Y-100537573D01* +X110821820Y-100543600D01* +X110821823Y-100543601D01* +X110821826Y-100543601D01* +X110933001Y-100543601D01* +X110933009Y-100543600D01* +X112511479Y-100543600D01* +X112569535Y-100519551D01* +X112603547Y-100505464D01* +X117826414Y-95282595D01* +X117833085Y-95279196D01* +X117837424Y-95273097D01* +X117859149Y-95265916D01* +X117880931Y-95254819D01* +X117895422Y-95253605D01* +X117895919Y-95253600D01* +X118010959Y-95253600D01* +X118015448Y-95252396D01* +X118026467Y-95252286D01* +X118050221Y-95259741D01* +X118074697Y-95264276D01* +X118081966Y-95269703D01* +X118084845Y-95270607D01* +X118086918Y-95273400D01* +X118097463Y-95281274D01* +X118141618Y-95325429D01* +X118176584Y-95339912D01* +X118176585Y-95339913D01* +X118176586Y-95339913D01* +X118233688Y-95363566D01* +X118233689Y-95363566D01* +X118344866Y-95363566D01* +X118344874Y-95363565D01* +X122831514Y-95363565D01* +X122903329Y-95333818D01* +X122923582Y-95325429D01* +X123946646Y-94302363D01* +X124001163Y-94274587D01* +X124061595Y-94284158D01* +X124086654Y-94302364D01* +X124239285Y-94454995D01* +X124239285Y-94454996D01* +X124277084Y-94492796D01* +X124292816Y-94513299D01* +X124331157Y-94579708D01* +X124331159Y-94579710D01* +X124331161Y-94579713D01* +X124415037Y-94663589D01* +X124415039Y-94663590D01* +X124415041Y-94663592D01* +X124517760Y-94722897D01* +X124517761Y-94722897D01* +X124517764Y-94722899D01* +X124632341Y-94753600D01* +X124632345Y-94753600D01* +X124633518Y-94753755D01* +X124634282Y-94754119D01* +X124638609Y-94755279D01* +X124638394Y-94756080D01* +X124688744Y-94780095D01* +X124717940Y-94833865D01* +X124716225Y-94877530D01* +X124701150Y-94933791D01* +X124701150Y-95052409D01* +X124714361Y-95101711D01* +X124731851Y-95166987D01* +X124779721Y-95249899D01* +X124784282Y-95271359D01* +X124792679Y-95291628D01* +X124790510Y-95300660D01* +X124792442Y-95309747D01* +X124783518Y-95329790D01* +X124778397Y-95351123D01* +X124771333Y-95357156D01* +X124767555Y-95365643D01* +X124731873Y-95390862D01* +X124709818Y-95399998D01* +X124702836Y-95402890D01* +X124702834Y-95402891D01* +X124659753Y-95420735D01* +X124539284Y-95541204D01* +X124513474Y-95603515D01* +X124492017Y-95635629D01* +X124471162Y-95656485D01* +X124411852Y-95759211D01* +X124411851Y-95759213D01* +X124411851Y-95759214D01* +X124381150Y-95873791D01* +X124381150Y-95992409D01* +X124396153Y-96048399D01* +X124411852Y-96106990D01* +X124436338Y-96149400D01* +X124449060Y-96209248D01* +X124424173Y-96265144D01* +X124371185Y-96295737D01* +X124350602Y-96297900D01* +X123810159Y-96297900D01* +X123751968Y-96278993D01* +X123740161Y-96268909D01* +X123659163Y-96187911D01* +X123659160Y-96187909D01* +X123659158Y-96187907D01* +X123556439Y-96128602D01* +X123556440Y-96128602D01* +X123542901Y-96124974D01* +X123441859Y-96097900D01* +X123323241Y-96097900D01* +X123253117Y-96116689D01* +X123208659Y-96128602D01* +X123105941Y-96187907D01* +X123022057Y-96271791D01* +X122962752Y-96374509D01* +X122953777Y-96408004D01* +X122932050Y-96489091D01* +X122932050Y-96607709D01* +X122951344Y-96679714D01* +X122962752Y-96722290D01* +X123022057Y-96825008D01* +X123022059Y-96825010D01* +X123022061Y-96825013D01* +X123105937Y-96908889D01* +X123105939Y-96908890D01* +X123105941Y-96908892D01* +X123208660Y-96968197D01* +X123208661Y-96968197D01* +X123208664Y-96968199D01* +X123323241Y-96998900D01* +X123323243Y-96998900D01* +X123441857Y-96998900D01* +X123441859Y-96998900D01* +X123556436Y-96968199D01* +X123556438Y-96968197D01* +X123556440Y-96968197D01* +X123659158Y-96908892D01* +X123659158Y-96908891D01* +X123659163Y-96908889D01* +X123740157Y-96827894D01* +X123794672Y-96800119D01* +X123810159Y-96798900D01* +X126193679Y-96798900D01* +X126251735Y-96774851D01* +X126285747Y-96760764D01* +X126916814Y-96129695D01* +X126971331Y-96101919D01* +X126986818Y-96100700D01* +X136369879Y-96100700D01* +X136415912Y-96081632D01* +X136461947Y-96062564D01* +X136550513Y-95973996D01* +X136605029Y-95946219D01* +X136620517Y-95945000D01* +X136735057Y-95945000D01* +X136735059Y-95945000D01* +X136849636Y-95914299D01* +X136849638Y-95914297D01* +X136849640Y-95914297D01* +X136952358Y-95854992D01* +X136952358Y-95854991D01* +X136952363Y-95854989D01* +X137036239Y-95771113D01* +X137054888Y-95738813D01* +X137095547Y-95668390D01* +X137095547Y-95668388D01* +X137095549Y-95668386D01* +X137126250Y-95553809D01* +X137126250Y-95435191D01* +X137122197Y-95420065D01* +X137125398Y-95358966D01* +X137163902Y-95311415D01* +X137223002Y-95295578D01* +X137280124Y-95317503D01* +X137287827Y-95324438D01* +X141116886Y-99153496D01* +X141144663Y-99208013D01* +X141135092Y-99268445D01* +X141091827Y-99311710D01* +X141046882Y-99322500D01* +X135389518Y-99322500D01* +X135331327Y-99303593D01* +X135319514Y-99293504D01* +X134971246Y-98945236D01* +X134943469Y-98890719D01* +X134942250Y-98875232D01* +X134942250Y-98760692D01* +X134942250Y-98760691D01* +X134911549Y-98646114D01* +X134911547Y-98646111D01* +X134911547Y-98646109D01* +X134852242Y-98543391D01* +X134852240Y-98543389D01* +X134852239Y-98543387D01* +X134842642Y-98533790D01* +X134814867Y-98479276D01* +X134824438Y-98418844D01* +X134867703Y-98375579D01* +X134928135Y-98366008D01* +X134962148Y-98378053D01* +X135057660Y-98433197D01* +X135057661Y-98433197D01* +X135057664Y-98433199D01* +X135172241Y-98463900D01* +X135172243Y-98463900D01* +X135290857Y-98463900D01* +X135290859Y-98463900D01* +X135405436Y-98433199D01* +X135405438Y-98433197D01* +X135405440Y-98433197D01* +X135508158Y-98373892D01* +X135508158Y-98373891D01* +X135508163Y-98373889D01* +X135592039Y-98290013D01* +X135594637Y-98285514D01* +X135651347Y-98187290D01* +X135651347Y-98187288D01* +X135651349Y-98187286D01* +X135682050Y-98072709D01* +X135682050Y-97954091D01* +X135651349Y-97839514D01* +X135651347Y-97839511D01* +X135651347Y-97839509D01* +X135592042Y-97736791D01* +X135592040Y-97736789D01* +X135592039Y-97736787D01* +X135508163Y-97652911D01* +X135508160Y-97652909D01* +X135508158Y-97652907D01* +X135405439Y-97593602D01* +X135405440Y-97593602D01* +X135346518Y-97577814D01* +X135290859Y-97562900D01* +X135172241Y-97562900D01* +X135116582Y-97577814D01* +X135057659Y-97593602D01* +X134954941Y-97652907D01* +X134871060Y-97736788D01* +X134867582Y-97742813D01* +X134846457Y-97779401D01* +X134800989Y-97820341D01* +X134760722Y-97828900D01* +X134386633Y-97828900D01* +X134328442Y-97809993D01* +X134292478Y-97760493D01* +X134292478Y-97699307D01* +X134328442Y-97649807D01* +X134361008Y-97634273D01* +X134413536Y-97620199D01* +X134413538Y-97620197D01* +X134413540Y-97620197D01* +X134516258Y-97560892D01* +X134516258Y-97560891D01* +X134516263Y-97560889D01* +X134600139Y-97477013D01* +X134620068Y-97442495D01* +X134659447Y-97374290D01* +X134659447Y-97374288D01* +X134659449Y-97374286D01* +X134690150Y-97259709D01* +X134690150Y-97141091D01* +X134659449Y-97026514D01* +X134659447Y-97026511D01* +X134659447Y-97026509D01* +X134614639Y-96948900D01* +X134601917Y-96889052D01* +X134626803Y-96833156D01* +X134679791Y-96802563D01* +X134700375Y-96800400D01* +X137074481Y-96800400D01* +X137132672Y-96819307D01* +X137144485Y-96829396D01* +X137403323Y-97088234D01* +X137656054Y-97340964D01* +X137683831Y-97395481D01* +X137685050Y-97410968D01* +X137685050Y-97525509D01* +X137694530Y-97560889D01* +X137715752Y-97640090D01* +X137775057Y-97742808D01* +X137775059Y-97742810D01* +X137775061Y-97742813D01* +X137858937Y-97826689D01* +X137858939Y-97826690D01* +X137858941Y-97826692D01* +X137961660Y-97885997D01* +X137961661Y-97885997D01* +X137961664Y-97885999D01* +X138076241Y-97916700D01* +X138076243Y-97916700D01* +X138194857Y-97916700D01* +X138194859Y-97916700D01* +X138309436Y-97885999D01* +X138309438Y-97885997D01* +X138309440Y-97885997D01* +X138412158Y-97826692D01* +X138412158Y-97826691D01* +X138412163Y-97826689D01* +X138496039Y-97742813D01* +X138506785Y-97724200D01* +X138555347Y-97640090D01* +X138555347Y-97640088D01* +X138555349Y-97640086D01* +X138586050Y-97525509D01* +X138586050Y-97406891D01* +X138555349Y-97292314D01* +X138555347Y-97292311D01* +X138555347Y-97292309D01* +X138496042Y-97189591D01* +X138496040Y-97189589D01* +X138496039Y-97189587D01* +X138412163Y-97105711D01* +X138412160Y-97105709D01* +X138412158Y-97105707D01* +X138309439Y-97046402D01* +X138309440Y-97046402D01* +X138295901Y-97042774D01* +X138194859Y-97015700D01* +X138080318Y-97015700D01* +X138022127Y-96996793D01* +X138010314Y-96986704D01* +X137708934Y-96685324D01* +X137361147Y-96337536D01* +X137361145Y-96337535D01* +X137361144Y-96337534D01* +X137269079Y-96299400D01* +X137269078Y-96299400D01* +X127686409Y-96299400D01* +X127686401Y-96299399D01* +X127674878Y-96299399D01* +X127575223Y-96299399D01* +X127521289Y-96321739D01* +X127483153Y-96337535D01* +X127446584Y-96374104D01* +X127392067Y-96401881D01* +X127376581Y-96403100D01* +X127262041Y-96403100D01* +X127191917Y-96421889D01* +X127147459Y-96433802D01* +X127044741Y-96493107D01* +X126960857Y-96576991D01* +X126901552Y-96679709D01* +X126900047Y-96685327D01* +X126870850Y-96794291D01* +X126870850Y-96912909D01* +X126885665Y-96968199D01* +X126901551Y-97027487D01* +X126928810Y-97074700D01* +X126941531Y-97134549D01* +X126916644Y-97190444D01* +X126863656Y-97221037D01* +X126843073Y-97223200D01* +X122231121Y-97223200D01* +X122139055Y-97261334D01* +X122139053Y-97261335D01* +X122139053Y-97261336D01* +X122128183Y-97272205D01* +X122073669Y-97299981D01* +X122058182Y-97301200D01* +X121943641Y-97301200D01* +X121873517Y-97319989D01* +X121829059Y-97331902D01* +X121726341Y-97391207D01* +X121642457Y-97475091D01* +X121583152Y-97577809D01* +X121578066Y-97596792D01* +X121552450Y-97692391D01* +X121552450Y-97811009D01* +X121572543Y-97885997D01* +X121583152Y-97925590D01* +X121642457Y-98028308D01* +X121642459Y-98028310D01* +X121642461Y-98028313D01* +X121726337Y-98112189D01* +X121726339Y-98112190D01* +X121726341Y-98112192D01* +X121829060Y-98171497D01* +X121829061Y-98171497D01* +X121829064Y-98171499D01* +X121943641Y-98202200D01* +X121943643Y-98202200D01* +X122062257Y-98202200D01* +X122062259Y-98202200D01* +X122176836Y-98171499D01* +X122176838Y-98171497D01* +X122176840Y-98171497D01* +X122279558Y-98112192D01* +X122279558Y-98112191D01* +X122279563Y-98112189D01* +X122363439Y-98028313D01* +X122363442Y-98028308D01* +X122422747Y-97925590D01* +X122422747Y-97925588D01* +X122422749Y-97925586D01* +X122453450Y-97811009D01* +X122453450Y-97811004D01* +X122453546Y-97810280D01* +X122453771Y-97809807D01* +X122455129Y-97804741D01* +X122456067Y-97804992D01* +X122479885Y-97755054D01* +X122533656Y-97725858D01* +X122551699Y-97724200D01* +X126177960Y-97724200D01* +X126236151Y-97743107D01* +X126272115Y-97792607D01* +X126272115Y-97853793D01* +X126263696Y-97872701D01* +X126244752Y-97905511D01* +X126244751Y-97905513D01* +X126244751Y-97905514D01* +X126214050Y-98020091D01* +X126214050Y-98138709D01* +X126241124Y-98239751D01* +X126244752Y-98253290D01* +X126304057Y-98356008D01* +X126304059Y-98356010D01* +X126304061Y-98356013D01* +X126387937Y-98439889D01* +X126387939Y-98439890D01* +X126387941Y-98439892D01* +X126490660Y-98499197D01* +X126490661Y-98499197D01* +X126490664Y-98499199D01* +X126605241Y-98529900D01* +X126605243Y-98529900D01* +X126723857Y-98529900D01* +X126723859Y-98529900D01* +X126838436Y-98499199D01* +X126838438Y-98499197D01* +X126838440Y-98499197D01* +X126941158Y-98439892D01* +X126941158Y-98439891D01* +X126941163Y-98439889D01* +X127022157Y-98358894D01* +X127076672Y-98331119D01* +X127092159Y-98329900D01* +X134105741Y-98329900D01* +X134163932Y-98348807D01* +X134199896Y-98398307D01* +X134199896Y-98459493D01* +X134175746Y-98498901D01* +X134144748Y-98529900D01* +X134131258Y-98543390D01* +X134131257Y-98543391D01* +X134071952Y-98646109D01* +X134071951Y-98646114D01* +X134041250Y-98760691D01* +X134041250Y-98879309D01* +X134058915Y-98945236D01* +X134071952Y-98993890D01* +X134131257Y-99096608D01* +X134131259Y-99096610D01* +X134131261Y-99096613D01* +X134215137Y-99180489D01* +X134215139Y-99180490D01* +X134215141Y-99180492D01* +X134317860Y-99239797D01* +X134317861Y-99239797D01* +X134317864Y-99239799D01* +X134432441Y-99270500D01* +X134432443Y-99270500D01* +X134546982Y-99270500D01* +X134605173Y-99289407D01* +X134616986Y-99299496D01* +X135032385Y-99714895D01* +X135032386Y-99714897D01* +X135102853Y-99785364D01* +X135102854Y-99785364D01* +X135102855Y-99785365D01* +X135194921Y-99823500D01* +X135194922Y-99823500D01* +X150533179Y-99823500D01* +X150599808Y-99795901D01* +X150625247Y-99785364D01* +X152779018Y-97631591D01* +X171309650Y-97631591D01* +X171309650Y-97750209D01* +X171328442Y-97820341D01* +X171340352Y-97864790D01* +X171399657Y-97967508D01* +X171399659Y-97967510D01* +X171399661Y-97967513D01* +X171483537Y-98051389D01* +X171483539Y-98051390D01* +X171483541Y-98051392D01* +X171586260Y-98110697D01* +X171586261Y-98110697D01* +X171586264Y-98110699D01* +X171700841Y-98141400D01* +X171700843Y-98141400D01* +X171819457Y-98141400D01* +X171819459Y-98141400D01* +X171934036Y-98110699D01* +X171934038Y-98110697D01* +X171934040Y-98110697D01* +X172036758Y-98051392D01* +X172036758Y-98051391D01* +X172036763Y-98051389D01* +X172120639Y-97967513D01* +X172128388Y-97954091D01* +X172179947Y-97864790D01* +X172179947Y-97864788D01* +X172179949Y-97864786D01* +X172210650Y-97750209D01* +X172210650Y-97631591D01* +X172179949Y-97517014D01* +X172179947Y-97517011D01* +X172179947Y-97517009D01* +X172120642Y-97414291D01* +X172120640Y-97414289D01* +X172120639Y-97414287D01* +X172036763Y-97330411D01* +X172036760Y-97330409D01* +X172036758Y-97330407D01* +X171934039Y-97271102D01* +X171934040Y-97271102D01* +X171920501Y-97267474D01* +X171819459Y-97240400D01* +X171700841Y-97240400D01* +X171630717Y-97259189D01* +X171586259Y-97271102D01* +X171483541Y-97330407D01* +X171399657Y-97414291D01* +X171340352Y-97517009D01* +X171330146Y-97555098D01* +X171309650Y-97631591D01* +X152779018Y-97631591D01* +X152931314Y-97479295D01* +X152985831Y-97451519D01* +X153001318Y-97450300D01* +X153115857Y-97450300D01* +X153115859Y-97450300D01* +X153230436Y-97419599D01* +X153230438Y-97419597D01* +X153230440Y-97419597D01* +X153333158Y-97360292D01* +X153333158Y-97360291D01* +X153333163Y-97360289D01* +X153417039Y-97276413D01* +X153458678Y-97204293D01* +X153476347Y-97173690D01* +X153476347Y-97173688D01* +X153476349Y-97173686D01* +X153507050Y-97059109D01* +X153507050Y-96940491D01* +X153476349Y-96825914D01* +X153476347Y-96825911D01* +X153476347Y-96825909D01* +X153417042Y-96723191D01* +X153417040Y-96723189D01* +X153417039Y-96723187D01* +X153333163Y-96639311D01* +X153333160Y-96639309D01* +X153333158Y-96639307D01* +X153230439Y-96580002D01* +X153230440Y-96580002D01* +X153216901Y-96576374D01* +X153115859Y-96549300D01* +X152997241Y-96549300D01* +X152931397Y-96566943D01* +X152882659Y-96580002D01* +X152779941Y-96639307D01* +X152696057Y-96723191D01* +X152636752Y-96825909D01* +X152606050Y-96940492D01* +X152606050Y-97055030D01* +X152587143Y-97113221D01* +X152577054Y-97125034D01* +X150408585Y-99293504D01* +X150354068Y-99321281D01* +X150338581Y-99322500D01* +X142458819Y-99322500D01* +X142400628Y-99303593D01* +X142364664Y-99254093D01* +X142364664Y-99192907D01* +X142388815Y-99153496D01* +X142921972Y-98620339D01* +X144535994Y-97006315D01* +X144580380Y-96980692D01* +X144584836Y-96979499D01* +X144687563Y-96920189D01* +X144771439Y-96836313D01* +X144815058Y-96760764D01* +X144830747Y-96733590D01* +X144830747Y-96733588D01* +X144830749Y-96733586D01* +X144861450Y-96619009D01* +X144861450Y-96500391D01* +X144830749Y-96385814D01* +X144830747Y-96385811D01* +X144830747Y-96385809D01* +X144771442Y-96283091D01* +X144771440Y-96283089D01* +X144771439Y-96283087D01* +X144687563Y-96199211D01* +X144687560Y-96199209D01* +X144687558Y-96199207D01* +X144584839Y-96139902D01* +X144584840Y-96139902D01* +X144571301Y-96136274D01* +X144470259Y-96109200D01* +X144351641Y-96109200D01* +X144281517Y-96127989D01* +X144237059Y-96139902D01* +X144134341Y-96199207D01* +X144050457Y-96283091D01* +X143991152Y-96385809D01* +X143976292Y-96441269D01* +X143960450Y-96500391D01* +X143960450Y-96619009D01* +X143965889Y-96639307D01* +X143991152Y-96733589D01* +X143993085Y-96736937D01* +X144005803Y-96796786D01* +X143980914Y-96852680D01* +X143977350Y-96856437D01* +X142342045Y-98491742D01* +X142287528Y-98519519D01* +X142227096Y-98509948D01* +X142183831Y-98466683D01* +X142176416Y-98447366D01* +X142162549Y-98395614D01* +X142162547Y-98395611D01* +X142162547Y-98395609D01* +X142103242Y-98292891D01* +X142103240Y-98292889D01* +X142103239Y-98292887D01* +X142019363Y-98209011D01* +X142019360Y-98209009D01* +X142019358Y-98209007D01* +X141916639Y-98149702D01* +X141916640Y-98149702D01* +X141885656Y-98141400D01* +X141802059Y-98119000D01* +X141683441Y-98119000D01* +X141683436Y-98119000D01* +X141641617Y-98130205D01* +X141580516Y-98127001D01* +X141545993Y-98104582D01* +X138910915Y-95469504D01* +X138883138Y-95414987D01* +X138892709Y-95354555D01* +X138935974Y-95311290D01* +X138980919Y-95300500D01* +X202925481Y-95300500D01* +X202983672Y-95319407D01* +X202995485Y-95329496D01* +X209854223Y-102188234D01* +X209882000Y-102242751D01* +X209872429Y-102303183D01* +X209829164Y-102346448D01* +X209803535Y-102355335D01* +X209774822Y-102361047D01* +X209774813Y-102361049D01* +X209592736Y-102436467D01* +X209428868Y-102545961D01* +X209428864Y-102545964D01* +X209289514Y-102685314D01* +X209289511Y-102685318D01* +X209180017Y-102849186D01* +X209104599Y-103031263D01* +X209104599Y-103031265D01* +X209066150Y-103224556D01* +X209066150Y-103421643D01* +X209083727Y-103510007D01* +X209103418Y-103609000D01* +X209104599Y-103614934D01* +X209104599Y-103614936D01* +X209180017Y-103797013D01* +X209180018Y-103797014D01* +X209289511Y-103960882D01* +X209428868Y-104100239D01* +X209592736Y-104209732D01* +X209774815Y-104285151D01* +X209839384Y-104297994D01* +X209892767Y-104327891D01* +X209918383Y-104383456D01* +X209906446Y-104443465D01* +X209861517Y-104484998D01* +X209835557Y-104492873D01* +X209750527Y-104506341D01* +X209548434Y-104572004D01* +X209359097Y-104668475D01* +X209187185Y-104793377D01* +X209036927Y-104943635D01* +X208912025Y-105115547D01* +X208815554Y-105304884D01* +X208749891Y-105506977D01* +X208739418Y-105573099D01* +X208739419Y-105573100D01* +X209787504Y-105573100D01* +X209749020Y-105639757D01* +X209716650Y-105760565D01* +X209716650Y-105885635D01* +X209749020Y-106006443D01* +X209787504Y-106073100D01* +X208739419Y-106073100D01* +X208749891Y-106139222D01* +X208815554Y-106341315D01* +X208912025Y-106530652D01* +X209036927Y-106702564D01* +X209187185Y-106852822D01* +X209359097Y-106977724D01* +X209548436Y-107074196D01* +X209718478Y-107129445D01* +X209767978Y-107165409D01* +X209786886Y-107223599D01* +X209767979Y-107281790D01* +X209718479Y-107317754D01* +X209687886Y-107322600D01* +X209435128Y-107322600D01* +X209435126Y-107322601D01* +X209341350Y-107337452D01* +X209341345Y-107337454D01* +X209228309Y-107395049D01* +X209138599Y-107484759D01* +X209081004Y-107597795D01* +X209066150Y-107691578D01* +X209066150Y-108954621D01* +X209066151Y-108954623D01* +X209081002Y-109048399D01* +X209081004Y-109048404D01* +X209138600Y-109161442D01* +X209228308Y-109251150D01* +X209341346Y-109308746D01* +X209435131Y-109323600D01* +X210948168Y-109323599D01* +X210948171Y-109323599D01* +X210948172Y-109323598D01* +X210995061Y-109316172D01* +X211041949Y-109308747D01* +X211041949Y-109308746D01* +X211041954Y-109308746D01* +X211154992Y-109251150D01* +X211244700Y-109161442D01* +X211302296Y-109048404D01* +X211317150Y-108954619D01* +X211317149Y-107691582D01* +X211317149Y-107691581D01* +X211317149Y-107691578D01* +X211317148Y-107691576D01* +X211302297Y-107597800D01* +X211302296Y-107597798D01* +X211302296Y-107597796D01* +X211244700Y-107484758D01* +X211154992Y-107395050D01* +X211041954Y-107337454D01* +X211041955Y-107337454D01* +X210948172Y-107322600D01* +X210695415Y-107322600D01* +X210637224Y-107303693D01* +X210601260Y-107254193D01* +X210601260Y-107193007D01* +X210637224Y-107143507D01* +X210664823Y-107129445D01* +X210834863Y-107074196D01* +X211024202Y-106977724D01* +X211196114Y-106852822D01* +X211346372Y-106702564D01* +X211471274Y-106530652D01* +X211567745Y-106341315D01* +X211633408Y-106139222D01* +X211643881Y-106073100D01* +X210595796Y-106073100D01* +X210634280Y-106006443D01* +X210666650Y-105885635D01* +X210666650Y-105760565D01* +X210634280Y-105639757D01* +X210595796Y-105573100D01* +X211643881Y-105573100D01* +X211643881Y-105573099D01* +X211633408Y-105506977D01* +X211567745Y-105304884D01* +X211471274Y-105115547D01* +X211346372Y-104943635D01* +X211196114Y-104793377D01* +X211024202Y-104668475D01* +X210834865Y-104572004D01* +X210632772Y-104506341D01* +X210547742Y-104492873D01* +X210493226Y-104465095D01* +X210465449Y-104410578D01* +X210475021Y-104350146D01* +X210518286Y-104306882D01* +X210543913Y-104297995D01* +X210608485Y-104285151D01* +X210790564Y-104209732D01* +X210954432Y-104100239D01* +X211093789Y-103960882D01* +X211203282Y-103797014D01* +X211278701Y-103614935D01* +X211317150Y-103421641D01* +X211317150Y-103224559D01* +X211278701Y-103031265D01* +X211203282Y-102849186D01* +X211093789Y-102685318D01* +X210954432Y-102545961D01* +X210790564Y-102436468D01* +X210790565Y-102436468D01* +X210790563Y-102436467D01* +X210608486Y-102361049D01* +X210568430Y-102353081D01* +X210521834Y-102343812D01* +X210468452Y-102313916D01* +X210442836Y-102258351D01* +X210442150Y-102246715D01* +X210442150Y-102121571D01* +X210404014Y-102029503D01* +X210333547Y-101959035D01* +X210333547Y-101959036D01* +X203444015Y-95069504D01* +X203416238Y-95014987D01* +X203425809Y-94954555D01* +X203469074Y-94911290D01* +X203514019Y-94900500D01* +X204039546Y-94900500D01* +X204097737Y-94919407D01* +X204109550Y-94929496D01* +X212120504Y-102940450D01* +X212148281Y-102994967D01* +X212149500Y-103010454D01* +X212149500Y-110189546D01* +X212130593Y-110247737D01* +X212120504Y-110259550D01* +X209044720Y-113335334D01* +X208973533Y-113441875D01* +X208924499Y-113560254D01* +X208924499Y-113560256D01* +X208899501Y-113685928D01* +X208899501Y-113814071D01* +X208924499Y-113939743D01* +X208924499Y-113939745D01* +X208973533Y-114058124D01* +X209032587Y-114146507D01* +X209044723Y-114164669D01* +X209135331Y-114255277D01* +X209241873Y-114326465D01* +X209360256Y-114375501D01* +X209485931Y-114400499D01* +X209485932Y-114400499D01* +X209614068Y-114400499D01* +X209614069Y-114400499D01* +X209739744Y-114375501D01* +X209858127Y-114326465D01* +X209964669Y-114255277D01* +X213305277Y-110914669D01* +X213376465Y-110808127D01* +X213425501Y-110689744D01* +X213429792Y-110668172D01* +X213450500Y-110564069D01* +X213450500Y-102635931D01* +X213425501Y-102510256D01* +X213388903Y-102421900D01* +X213376466Y-102391874D01* +X213305277Y-102285331D01* +X204764669Y-93744723D01* +X204764665Y-93744720D01* +X204658126Y-93673534D01* +X204539747Y-93624500D01* +X204539745Y-93624499D01* +X204539744Y-93624499D01* +X204414069Y-93599500D01* +X197624240Y-93599500D01* +X197566049Y-93580593D01* +X197530085Y-93531093D01* +X197530085Y-93469907D01* +X197544150Y-93442305D01* +X197546601Y-93438931D01* +X197630565Y-93274141D01* +X197687717Y-93098243D01* +X197698840Y-93028022D01* +X197716650Y-92915576D01* +X197716650Y-92730623D01* +X197698840Y-92618178D01* +X197691700Y-92573099D01* +X208739418Y-92573099D01* +X208739419Y-92573100D01* +X209787504Y-92573100D01* +X209749020Y-92639757D01* +X209716650Y-92760565D01* +X209716650Y-92885635D01* +X209749020Y-93006443D01* +X209787504Y-93073100D01* +X208739419Y-93073100D01* +X208749891Y-93139222D01* +X208815554Y-93341315D01* +X208912025Y-93530652D01* +X209036927Y-93702564D01* +X209187185Y-93852822D01* +X209359097Y-93977724D01* +X209548436Y-94074196D01* +X209718478Y-94129445D01* +X209767978Y-94165409D01* +X209786886Y-94223599D01* +X209767979Y-94281790D01* +X209718479Y-94317754D01* +X209687886Y-94322600D01* +X209435128Y-94322600D01* +X209435126Y-94322601D01* +X209341350Y-94337452D01* +X209341345Y-94337454D01* +X209228309Y-94395049D01* +X209138599Y-94484759D01* +X209081004Y-94597795D01* +X209066150Y-94691578D01* +X209066150Y-95954621D01* +X209066151Y-95954623D01* +X209081002Y-96048399D01* +X209081004Y-96048404D01* +X209138600Y-96161442D01* +X209228308Y-96251150D01* +X209341346Y-96308746D01* +X209435131Y-96323600D01* +X210948168Y-96323599D01* +X210948171Y-96323599D01* +X210948172Y-96323598D01* +X211014285Y-96313128D01* +X211041949Y-96308747D01* +X211041949Y-96308746D01* +X211041954Y-96308746D01* +X211154992Y-96251150D01* +X211244700Y-96161442D01* +X211302296Y-96048404D01* +X211317150Y-95954619D01* +X211317149Y-94691582D01* +X211317149Y-94691581D01* +X211317149Y-94691578D01* +X211317148Y-94691576D01* +X211302297Y-94597800D01* +X211302296Y-94597798D01* +X211302296Y-94597796D01* +X211244700Y-94484758D01* +X211154992Y-94395050D01* +X211041954Y-94337454D01* +X211041955Y-94337454D01* +X210948172Y-94322600D01* +X210695415Y-94322600D01* +X210637224Y-94303693D01* +X210601260Y-94254193D01* +X210601260Y-94193007D01* +X210637224Y-94143507D01* +X210664823Y-94129445D01* +X210834863Y-94074196D01* +X211024202Y-93977724D01* +X211196114Y-93852822D01* +X211346372Y-93702564D01* +X211471274Y-93530652D01* +X211567745Y-93341315D01* +X211633408Y-93139222D01* +X211643881Y-93073100D01* +X210595796Y-93073100D01* +X210634280Y-93006443D01* +X210666650Y-92885635D01* +X210666650Y-92760565D01* +X210634280Y-92639757D01* +X210595796Y-92573100D01* +X211643881Y-92573100D01* +X211643881Y-92573099D01* +X211633408Y-92506977D01* +X211567745Y-92304884D01* +X211471274Y-92115547D01* +X211346372Y-91943635D01* +X211196114Y-91793377D01* +X211024202Y-91668475D01* +X210834865Y-91572004D01* +X210632772Y-91506341D01* +X210547742Y-91492873D01* +X210493226Y-91465095D01* +X210465449Y-91410578D01* +X210475021Y-91350146D01* +X210518286Y-91306882D01* +X210543913Y-91297995D01* +X210608485Y-91285151D01* +X210790564Y-91209732D01* +X210954432Y-91100239D01* +X211093789Y-90960882D01* +X211203282Y-90797014D01* +X211278701Y-90614935D01* +X211317150Y-90421641D01* +X211317150Y-90224559D01* +X211278701Y-90031265D01* +X211203282Y-89849186D01* +X211093789Y-89685318D01* +X210954432Y-89545961D01* +X210832065Y-89464198D01* +X210790563Y-89436467D01* +X210608485Y-89361049D01* +X210415193Y-89322600D01* +X210415191Y-89322600D01* +X209968109Y-89322600D01* +X209968106Y-89322600D01* +X209774815Y-89361049D01* +X209774813Y-89361049D01* +X209592736Y-89436467D01* +X209428868Y-89545961D01* +X209428864Y-89545964D01* +X209289514Y-89685314D01* +X209289511Y-89685318D01* +X209180017Y-89849186D01* +X209104599Y-90031263D01* +X209104599Y-90031265D01* +X209066150Y-90224556D01* +X209066150Y-90421643D01* +X209104599Y-90614934D01* +X209104599Y-90614936D01* +X209180017Y-90797013D01* +X209199905Y-90826777D01* +X209289511Y-90960882D01* +X209428868Y-91100239D01* +X209592736Y-91209732D01* +X209774815Y-91285151D01* +X209839384Y-91297994D01* +X209892767Y-91327891D01* +X209918383Y-91383456D01* +X209906446Y-91443465D01* +X209861517Y-91484998D01* +X209835557Y-91492873D01* +X209750527Y-91506341D01* +X209548434Y-91572004D01* +X209359097Y-91668475D01* +X209187185Y-91793377D01* +X209036927Y-91943635D01* +X208912025Y-92115547D01* +X208815554Y-92304884D01* +X208749891Y-92506977D01* +X208739418Y-92573099D01* +X197691700Y-92573099D01* +X197687717Y-92547956D01* +X197630565Y-92372058D01* +X197546603Y-92207272D01* +X197546598Y-92207264D01* +X197531634Y-92186668D01* +X196941650Y-92776653D01* +X196941650Y-92770439D01* +X196914391Y-92668706D01* +X196861730Y-92577494D01* +X196787256Y-92503020D01* +X196696044Y-92450359D01* +X196594311Y-92423100D01* +X196588094Y-92423100D01* +X197178080Y-91833114D01* +X197157485Y-91818151D01* +X197157477Y-91818146D01* +X196992693Y-91734185D01* +X196965643Y-91725396D01* +X196916143Y-91689432D01* +X196897236Y-91631241D01* +X196916143Y-91573050D01* +X196941232Y-91548927D01* +X197067875Y-91464308D01* +X197182858Y-91349325D01* +X197273198Y-91214121D01* +X197335426Y-91063889D01* +X197367150Y-90904405D01* +X197367150Y-90741795D01* +X197335426Y-90582311D01* +X197290559Y-90473993D01* +X197273199Y-90432081D01* +X197266223Y-90421641D01* +X197182858Y-90296875D01* +X197067875Y-90181892D01* +X196932671Y-90091552D01* +X196932670Y-90091551D01* +X196932668Y-90091550D01* +X196782440Y-90029324D01* +X196622955Y-89997600D01* +X196460345Y-89997600D01* +X196460344Y-89997600D01* +X196300859Y-90029324D01* +X196150631Y-90091550D01* +X196015428Y-90181889D01* +X195900439Y-90296878D01* +X195810100Y-90432081D01* +X195747874Y-90582309D01* +X195716150Y-90741794D01* +X195716150Y-90904405D01* +X195747874Y-91063890D01* +X195810100Y-91214118D01* +X195877100Y-91314392D01* +X195900442Y-91349325D01* +X196015425Y-91464308D01* +X196107556Y-91525868D01* +X196142064Y-91548925D01* +X196179944Y-91596975D01* +X196182346Y-91658113D01* +X196148354Y-91708987D01* +X196117657Y-91725395D01* +X196090610Y-91734183D01* +X195925818Y-91818148D01* +X195905218Y-91833114D01* +X196495204Y-92423100D01* +X196488989Y-92423100D01* +X196387256Y-92450359D01* +X196296044Y-92503020D01* +X196221570Y-92577494D01* +X196168909Y-92668706D01* +X196141650Y-92770439D01* +X196141650Y-92776654D01* +X195551664Y-92186668D01* +X195536698Y-92207268D01* +X195452734Y-92372058D01* +X195395582Y-92547956D01* +X195366650Y-92730622D01* +X195366650Y-92915577D01* +X195395582Y-93098243D01* +X195452734Y-93274141D01* +X195536698Y-93438931D01* +X195539150Y-93442305D01* +X195558060Y-93500495D01* +X195539156Y-93558687D01* +X195489657Y-93594653D01* +X195459060Y-93599500D01* +X194599500Y-93599500D01* +X194541309Y-93580593D01* +X194505345Y-93531093D01* +X194500500Y-93500500D01* +X194500500Y-90785932D01* +X194500500Y-90785931D01* +X194475501Y-90660256D01* +X194426465Y-90541873D01* +X194400012Y-90502283D01* +X194355276Y-90435330D01* +X192464669Y-88544723D01* +X192464665Y-88544720D01* +X192358126Y-88473534D01* +X192239747Y-88424500D01* +X192239745Y-88424499D01* +X192239744Y-88424499D01* +X192114069Y-88399500D01* +X190835931Y-88399500D01* +X190835930Y-88399500D01* +X190773093Y-88411999D01* +X190710256Y-88424499D01* +X190710255Y-88424499D01* +X190710252Y-88424500D01* +X190591874Y-88473534D01* +X190591866Y-88473538D01* +X190485331Y-88544724D01* +X190485327Y-88544727D01* +X190394727Y-88635327D01* +X190394724Y-88635331D01* +X190323538Y-88741866D01* +X190323534Y-88741874D01* +X190274500Y-88860252D01* +X190274499Y-88860257D01* +X190250159Y-88982620D01* +X190249500Y-88985931D01* +X190249500Y-89114069D01* +X190270531Y-89219797D01* +X190274499Y-89239742D01* +X190274500Y-89239747D01* +X190323534Y-89358125D01* +X190323538Y-89358133D01* +X190342026Y-89385801D01* +X190394724Y-89464669D01* +X190485331Y-89555276D01* +X190548848Y-89597717D01* +X190591866Y-89626461D01* +X190591870Y-89626463D01* +X190591873Y-89626465D01* +X190710256Y-89675501D01* +X190835931Y-89700500D01* +X191739546Y-89700500D01* +X191797737Y-89719407D01* +X191809550Y-89729496D01* +X193170504Y-91090450D01* +X193198281Y-91144967D01* +X193199500Y-91160454D01* +X193199500Y-94314069D01* +X193215608Y-94395049D01* +X193224499Y-94439742D01* +X193224500Y-94439747D01* +X193273534Y-94558125D01* +X193273538Y-94558133D01* +X193309329Y-94611697D01* +X193331915Y-94645499D01* +X193348524Y-94704386D01* +X193327347Y-94761789D01* +X193276474Y-94795783D01* +X193249600Y-94799500D01* +X138850019Y-94799500D01* +X138791828Y-94780593D01* +X138780015Y-94770504D01* +X138329015Y-94319504D01* +X138301238Y-94264987D01* +X138310809Y-94204555D01* +X138354074Y-94161290D01* +X138399019Y-94150500D01* +X154639318Y-94150500D01* +X154639319Y-94150500D01* +X154764994Y-94125501D01* +X154883377Y-94076465D01* +X154902345Y-94063791D01* +X154989919Y-94005277D01* +X155220727Y-93774469D01* +X155291915Y-93667927D01* +X155340951Y-93549543D01* +X155365950Y-93423869D01* +X155365950Y-93295731D01* +X155340951Y-93170056D01* +X155302483Y-93077187D01* +X155291914Y-93051670D01* +X155220731Y-92945135D01* +X155220729Y-92945133D01* +X155220727Y-92945130D01* +X155208098Y-92932501D01* +X155180323Y-92877987D01* +X155189894Y-92817555D01* +X155233159Y-92774290D01* +X155278104Y-92763500D01* +X163875691Y-92763500D01* +X163875692Y-92763500D01* +X164040984Y-92730622D01* +X173016650Y-92730622D01* +X173016650Y-92915577D01* +X173045582Y-93098243D01* +X173102734Y-93274141D01* +X173186696Y-93438927D01* +X173186701Y-93438935D01* +X173201664Y-93459529D01* +X173791650Y-92869543D01* +X173791650Y-92875761D01* +X173818909Y-92977494D01* +X173871570Y-93068706D01* +X173946044Y-93143180D01* +X174037256Y-93195841D01* +X174138989Y-93223100D01* +X174145202Y-93223100D01* +X173555218Y-93813084D01* +X173575814Y-93828048D01* +X173575822Y-93828053D01* +X173740608Y-93912015D01* +X173916506Y-93969167D01* +X174099173Y-93998100D01* +X174284127Y-93998100D01* +X174466793Y-93969167D01* +X174642691Y-93912015D01* +X174807487Y-93828047D01* +X174828080Y-93813084D01* +X174238096Y-93223100D01* +X174244311Y-93223100D01* +X174346044Y-93195841D01* +X174437256Y-93143180D01* +X174511730Y-93068706D01* +X174564391Y-92977494D01* +X174591650Y-92875761D01* +X174591650Y-92869546D01* +X175181634Y-93459530D01* +X175196597Y-93438937D01* +X175280565Y-93274141D01* +X175337717Y-93098243D01* +X175366650Y-92915577D01* +X175366650Y-92730622D01* +X175337717Y-92547956D01* +X175280565Y-92372058D01* +X175196603Y-92207272D01* +X175196598Y-92207264D01* +X175181634Y-92186668D01* +X174591650Y-92776652D01* +X174591650Y-92770439D01* +X174564391Y-92668706D01* +X174511730Y-92577494D01* +X174437256Y-92503020D01* +X174346044Y-92450359D01* +X174244311Y-92423100D01* +X174238094Y-92423100D01* +X174828080Y-91833114D01* +X174807485Y-91818151D01* +X174807477Y-91818146D01* +X174642693Y-91734185D01* +X174615643Y-91725396D01* +X174566143Y-91689432D01* +X174547236Y-91631241D01* +X174566143Y-91573050D01* +X174591232Y-91548927D01* +X174717875Y-91464308D01* +X174832858Y-91349325D01* +X174923198Y-91214121D01* +X174985426Y-91063889D01* +X175017150Y-90904405D01* +X175017150Y-90741795D01* +X174985426Y-90582311D01* +X174940559Y-90473993D01* +X174923199Y-90432081D01* +X174916223Y-90421641D01* +X174832858Y-90296875D01* +X174717875Y-90181892D01* +X174582671Y-90091552D01* +X174582670Y-90091551D01* +X174582668Y-90091550D01* +X174432440Y-90029324D01* +X174272955Y-89997600D01* +X174110345Y-89997600D01* +X174110344Y-89997600D01* +X173950859Y-90029324D01* +X173800631Y-90091550D01* +X173665428Y-90181889D01* +X173550439Y-90296878D01* +X173460100Y-90432081D01* +X173397874Y-90582309D01* +X173366150Y-90741794D01* +X173366150Y-90904405D01* +X173397874Y-91063890D01* +X173460100Y-91214118D01* +X173527100Y-91314392D01* +X173550442Y-91349325D01* +X173665425Y-91464308D01* +X173757556Y-91525868D01* +X173792064Y-91548925D01* +X173829944Y-91596975D01* +X173832346Y-91658113D01* +X173798354Y-91708987D01* +X173767657Y-91725395D01* +X173740610Y-91734183D01* +X173575818Y-91818148D01* +X173555218Y-91833114D01* +X174145204Y-92423100D01* +X174138989Y-92423100D01* +X174037256Y-92450359D01* +X173946044Y-92503020D01* +X173871570Y-92577494D01* +X173818909Y-92668706D01* +X173791650Y-92770439D01* +X173791650Y-92776654D01* +X173201664Y-92186668D01* +X173186698Y-92207268D01* +X173102734Y-92372058D01* +X173045582Y-92547956D01* +X173016650Y-92730622D01* +X164040984Y-92730622D01* +X164049666Y-92728895D01* +X164149811Y-92687413D01* +X164213547Y-92661013D01* +X164297200Y-92605117D01* +X164329706Y-92583398D01* +X164329707Y-92583397D01* +X164337434Y-92578234D01* +X164361036Y-92562464D01* +X164499464Y-92424035D01* +X164598013Y-92276546D01* +X164665895Y-92112666D01* +X164700500Y-91938692D01* +X164700500Y-91761308D01* +X164665895Y-91587334D01* +X164598013Y-91423453D01* +X164598011Y-91423451D01* +X164598009Y-91423445D01* +X164541479Y-91338844D01* +X164499464Y-91275964D01* +X164374036Y-91150536D01* +X164327507Y-91119446D01* +X164226554Y-91051990D01* +X164226545Y-91051986D01* +X164062664Y-90984104D01* +X163888694Y-90949500D01* +X163888692Y-90949500D01* +X163711308Y-90949500D01* +X163711305Y-90949500D01* +X163666887Y-90958335D01* +X163655512Y-90960598D01* +X163636200Y-90962500D01* +X142824758Y-90962500D01* +X142817160Y-90960031D01* +X142809271Y-90961281D01* +X142788615Y-90950756D01* +X142766567Y-90943593D01* +X142754754Y-90933504D01* +X142628185Y-90806935D01* +X138682299Y-86861049D01* +X134664486Y-82843236D01* +X134597065Y-82798187D01* +X134597064Y-82798186D01* +X134517004Y-82744690D01* +X134516992Y-82744684D01* +X134428749Y-82708134D01* +X134353119Y-82676806D01* +X134353113Y-82676804D01* +X134179144Y-82642200D01* +X134179142Y-82642200D01* +X134179141Y-82642200D01* +X131230659Y-82642200D01* +X131230656Y-82642200D01* +X131056684Y-82676806D01* +X131056682Y-82676806D01* +X130892805Y-82744685D01* +X130892804Y-82744685D01* +X130745315Y-82843235D01* +X130619885Y-82968665D01* +X130521335Y-83116154D01* +X130521335Y-83116155D01* +X130453456Y-83280032D01* +X130453456Y-83280034D01* +X130418850Y-83454006D01* +X130418850Y-83631393D01* +X130453456Y-83805365D01* +X130453456Y-83805367D01* +X130521335Y-83969244D01* +X130521335Y-83969245D01* +X130603059Y-84091552D01* +X130619886Y-84116735D01* +X130745315Y-84242164D01* +X130892803Y-84340713D01* +X130892804Y-84340713D01* +X130892805Y-84340714D01* +X130896615Y-84342292D01* +X131056684Y-84408594D01* +X131230659Y-84443200D01* +X133676442Y-84443200D01* +X133734633Y-84462107D01* +X133746446Y-84472196D01* +X141836714Y-92562464D01* +X141868043Y-92583397D01* +X141984203Y-92661013D01* +X141988329Y-92662722D01* +X141996111Y-92667854D01* +X142012485Y-92688369D01* +X142030680Y-92707291D01* +X142031328Y-92711976D01* +X142034280Y-92715675D01* +X142035468Y-92741898D01* +X142039066Y-92767899D01* +X142036835Y-92772071D01* +X142037050Y-92776797D01* +X142022603Y-92798703D01* +X142010227Y-92821861D01* +X142005968Y-92823926D01* +X142003365Y-92827875D01* +X141978802Y-92837105D01* +X141955177Y-92848566D01* +X141946762Y-92849145D01* +X141946090Y-92849398D01* +X141945490Y-92849232D01* +X141941607Y-92849500D01* +X141021169Y-92849500D01* +X140962978Y-92830593D01* +X140927014Y-92781093D01* +X140927014Y-92719907D01* +X140935433Y-92701000D01* +X140962747Y-92653690D01* +X140962747Y-92653688D01* +X140962749Y-92653686D01* +X140993450Y-92539109D01* +X140993450Y-92420491D01* +X140962749Y-92305914D01* +X140962747Y-92305911D01* +X140962747Y-92305909D01* +X140903442Y-92203191D01* +X140903440Y-92203189D01* +X140903439Y-92203187D01* +X140819563Y-92119311D01* +X140819560Y-92119309D01* +X140819558Y-92119307D01* +X140716839Y-92060002D01* +X140716840Y-92060002D01* +X140703301Y-92056374D01* +X140602259Y-92029300D01* +X140483641Y-92029300D01* +X140427075Y-92044457D01* +X140369059Y-92060002D01* +X140266341Y-92119307D01* +X140182457Y-92203191D01* +X140123152Y-92305909D01* +X140111847Y-92348100D01* +X140092450Y-92420491D01* +X140092450Y-92539109D01* +X140112889Y-92615389D01* +X140123152Y-92653690D01* +X140150467Y-92701000D01* +X140163189Y-92760848D01* +X140138302Y-92816744D01* +X140085314Y-92847337D01* +X140064731Y-92849500D01* +X138599404Y-92849500D01* +X138541213Y-92830593D01* +X138529401Y-92820504D01* +X138491319Y-92782422D01* +X138384776Y-92711234D01* +X138266392Y-92662198D01* +X138266387Y-92662197D01* +X138260433Y-92661012D01* +X138260433Y-92661013D01* +X138140721Y-92637200D01* +X138140719Y-92637200D01* +X135697981Y-92637200D01* +X135697978Y-92637200D01* +X135578267Y-92661013D01* +X135578266Y-92661012D01* +X135572312Y-92662197D01* +X135572307Y-92662198D01* +X135453923Y-92711234D01* +X135400821Y-92746716D01* +X135345820Y-92763400D01* +X131796883Y-92763400D01* +X131741882Y-92746716D01* +X131734671Y-92741898D01* +X131690577Y-92712435D01* +X131690576Y-92712434D01* +X131690574Y-92712433D01* +X131572194Y-92663399D01* +X131446521Y-92638401D01* +X131446519Y-92638401D01* +X131318381Y-92638401D01* +X131318378Y-92638401D01* +X131192706Y-92663399D01* +X131192704Y-92663399D01* +X131074327Y-92712432D01* +X131074317Y-92712437D01* +X131031092Y-92741320D01* +X130972204Y-92757928D01* +X130914800Y-92736750D01* +X130880808Y-92685876D01* +X130880464Y-92684627D01* +X130879521Y-92681106D01* +X130866849Y-92633814D01* +X130866847Y-92633811D01* +X130866847Y-92633809D01* +X130807542Y-92531091D01* +X130807540Y-92531089D01* +X130807539Y-92531087D01* +X130723663Y-92447211D01* +X130723660Y-92447209D01* +X130723658Y-92447207D01* +X130620939Y-92387902D01* +X130620940Y-92387902D01* +X130599413Y-92382134D01* +X130506359Y-92357200D01* +X130387741Y-92357200D01* +X130332291Y-92372058D01* +X130300897Y-92380470D01* +X130297209Y-92381458D01* +X130236107Y-92378255D01* +X130188557Y-92339750D01* +X130172722Y-92280649D01* +X130194649Y-92223528D01* +X130201572Y-92215837D01* +X133146414Y-89270996D01* +X133200931Y-89243219D01* +X133216418Y-89242000D01* +X136895841Y-89242000D01* +X136954032Y-89260907D01* +X136965838Y-89270990D01* +X137046837Y-89351989D01* +X137046839Y-89351990D01* +X137046841Y-89351992D01* +X137149560Y-89411297D01* +X137149561Y-89411297D01* +X137149564Y-89411299D01* +X137264141Y-89442000D01* +X137264143Y-89442000D01* +X137382757Y-89442000D01* +X137382759Y-89442000D01* +X137497336Y-89411299D01* +X137497338Y-89411297D01* +X137497340Y-89411297D01* +X137600058Y-89351992D01* +X137600058Y-89351991D01* +X137600063Y-89351989D01* +X137683939Y-89268113D01* +X137683942Y-89268108D01* +X137743247Y-89165390D01* +X137743247Y-89165388D01* +X137743249Y-89165386D01* +X137773950Y-89050809D01* +X137773950Y-88932191D01* +X137743249Y-88817614D01* +X137743247Y-88817611D01* +X137743247Y-88817609D01* +X137683942Y-88714891D01* +X137683940Y-88714889D01* +X137683939Y-88714887D01* +X137600063Y-88631011D01* +X137600060Y-88631009D01* +X137600058Y-88631007D01* +X137497339Y-88571702D01* +X137497340Y-88571702D01* +X137483801Y-88568074D01* +X137382759Y-88541000D01* +X137264141Y-88541000D01* +X137194017Y-88559789D01* +X137149559Y-88571702D01* +X137046841Y-88631007D01* +X137046840Y-88631008D01* +X137046837Y-88631010D01* +X137046837Y-88631011D01* +X136965842Y-88712005D01* +X136911328Y-88739781D01* +X136895841Y-88741000D01* +X133133009Y-88741000D01* +X133133001Y-88740999D01* +X133121478Y-88740999D01* +X133021822Y-88740999D01* +X133021821Y-88740999D01* +X132995982Y-88751702D01* +X132956719Y-88767965D01* +X132940923Y-88774508D01* +X132929752Y-88779136D01* +X132859285Y-88849604D01* +X129728384Y-91980504D01* +X129673867Y-92008281D01* +X129658380Y-92009500D01* +X129543841Y-92009500D01* +X129490813Y-92023709D01* +X129429259Y-92040202D01* +X129326541Y-92099507D01* +X129242657Y-92183391D01* +X129183352Y-92286110D01* +X129180869Y-92292106D01* +X129178579Y-92291157D01* +X129151062Y-92333510D01* +X129093935Y-92355423D01* +X129034839Y-92339572D01* +X128996345Y-92292013D01* +X128993151Y-92282178D01* +X128992741Y-92280649D01* +X128989249Y-92267614D01* +X128989248Y-92267613D01* +X128989248Y-92267611D01* +X128989247Y-92267610D01* +X128929942Y-92164891D01* +X128929938Y-92164886D01* +X128848946Y-92083893D01* +X128821169Y-92029376D01* +X128819950Y-92013890D01* +X128819950Y-82420967D01* +X128822418Y-82413369D01* +X128821169Y-82405479D01* +X128831692Y-82384825D01* +X128838857Y-82362776D01* +X128848947Y-82350963D01* +X128897315Y-82302596D01* +X128951832Y-82274819D01* +X128967318Y-82273600D01* +X129065265Y-82273600D01* +X129065266Y-82273600D01* +X129248901Y-82237073D01* +X129421881Y-82165422D01* +X129421884Y-82165419D01* +X129421888Y-82165418D01* +X129468454Y-82134303D01* +X129577558Y-82061402D01* +X129709952Y-81929008D01* +X129803486Y-81789025D01* +X129813968Y-81773338D01* +X129813969Y-81773334D01* +X129813972Y-81773331D01* +X129871389Y-81634713D01* +X129911126Y-81588189D01* +X129962853Y-81573600D01* +X130123179Y-81573600D01* +X130181235Y-81549551D01* +X130215247Y-81535464D01* +X130521230Y-81229481D01* +X132081150Y-81229481D01* +X132081150Y-81416718D01* +X132117676Y-81600349D01* +X132189327Y-81773329D01* +X132189331Y-81773338D01* +X132245965Y-81858095D01* +X132293348Y-81929008D01* +X132425742Y-82061402D01* +X132490104Y-82104407D01* +X132581411Y-82165418D01* +X132581417Y-82165420D01* +X132581419Y-82165422D01* +X132754399Y-82237073D01* +X132938034Y-82273600D01* +X132938035Y-82273600D01* +X133125265Y-82273600D01* +X133125266Y-82273600D01* +X133308901Y-82237073D01* +X133481881Y-82165422D01* +X133481884Y-82165419D01* +X133481888Y-82165418D01* +X133528454Y-82134303D01* +X133637558Y-82061402D01* +X133769952Y-81929008D01* +X133863486Y-81789025D01* +X133873968Y-81773338D01* +X133873969Y-81773334D01* +X133873972Y-81773331D01* +X133945623Y-81600351D01* +X133982150Y-81416716D01* +X133982150Y-81229484D01* +X133982149Y-81229481D01* +X134621150Y-81229481D01* +X134621150Y-81416718D01* +X134657676Y-81600349D01* +X134729327Y-81773329D01* +X134729331Y-81773338D01* +X134785965Y-81858095D01* +X134833348Y-81929008D01* +X134965742Y-82061402D01* +X135030104Y-82104407D01* +X135121411Y-82165418D01* +X135121417Y-82165420D01* +X135121419Y-82165422D01* +X135294399Y-82237073D01* +X135478034Y-82273600D01* +X135478035Y-82273600D01* +X135665265Y-82273600D01* +X135665266Y-82273600D01* +X135848901Y-82237073D01* +X136021881Y-82165422D01* +X136021884Y-82165419D01* +X136021888Y-82165418D01* +X136068454Y-82134303D01* +X136177558Y-82061402D01* +X136309952Y-81929008D01* +X136403486Y-81789025D01* +X136413968Y-81773338D01* +X136413969Y-81773334D01* +X136413972Y-81773331D01* +X136485623Y-81600351D01* +X136522150Y-81416716D01* +X136522150Y-81229484D01* +X136522149Y-81229481D01* +X137161150Y-81229481D01* +X137161150Y-81416718D01* +X137197676Y-81600349D01* +X137269327Y-81773329D01* +X137269331Y-81773338D01* +X137325965Y-81858095D01* +X137373348Y-81929008D01* +X137505742Y-82061402D01* +X137570104Y-82104407D01* +X137661411Y-82165418D01* +X137661417Y-82165420D01* +X137661419Y-82165422D01* +X137834399Y-82237073D01* +X138018034Y-82273600D01* +X138018035Y-82273600D01* +X138205265Y-82273600D01* +X138205266Y-82273600D01* +X138388901Y-82237073D01* +X138561881Y-82165422D01* +X138561884Y-82165419D01* +X138561888Y-82165418D01* +X138608454Y-82134303D01* +X138717558Y-82061402D01* +X138849952Y-81929008D01* +X138943486Y-81789025D01* +X138953968Y-81773338D01* +X138953969Y-81773334D01* +X138953972Y-81773331D01* +X139025623Y-81600351D01* +X139062150Y-81416716D01* +X139062150Y-81229484D01* +X139062149Y-81229481D01* +X139701150Y-81229481D01* +X139701150Y-81416718D01* +X139737676Y-81600349D01* +X139809327Y-81773329D01* +X139809331Y-81773338D01* +X139865965Y-81858095D01* +X139913348Y-81929008D01* +X140045742Y-82061402D01* +X140110104Y-82104407D01* +X140201411Y-82165418D01* +X140201417Y-82165420D01* +X140201419Y-82165422D01* +X140374399Y-82237073D01* +X140558034Y-82273600D01* +X140558035Y-82273600D01* +X140745265Y-82273600D01* +X140745266Y-82273600D01* +X140928901Y-82237073D01* +X141101881Y-82165422D01* +X141101884Y-82165419D01* +X141101888Y-82165418D01* +X141148454Y-82134303D01* +X141257558Y-82061402D01* +X141389952Y-81929008D01* +X141483486Y-81789025D01* +X141493968Y-81773338D01* +X141493969Y-81773334D01* +X141493972Y-81773331D01* +X141565623Y-81600351D01* +X141602150Y-81416716D01* +X141602150Y-81229484D01* +X141602149Y-81229481D01* +X142241150Y-81229481D01* +X142241150Y-81416718D01* +X142277676Y-81600349D01* +X142349327Y-81773329D01* +X142349331Y-81773338D01* +X142405965Y-81858095D01* +X142453348Y-81929008D01* +X142585742Y-82061402D01* +X142650104Y-82104407D01* +X142741411Y-82165418D01* +X142741417Y-82165420D01* +X142741419Y-82165422D01* +X142914399Y-82237073D01* +X143098034Y-82273600D01* +X143098035Y-82273600D01* +X143285265Y-82273600D01* +X143285266Y-82273600D01* +X143468901Y-82237073D01* +X143641881Y-82165422D01* +X143641884Y-82165419D01* +X143641888Y-82165418D01* +X143688454Y-82134303D01* +X143797558Y-82061402D01* +X143929952Y-81929008D01* +X144023486Y-81789025D01* +X144033968Y-81773338D01* +X144033969Y-81773334D01* +X144033972Y-81773331D01* +X144105623Y-81600351D01* +X144142150Y-81416716D01* +X144142150Y-81229484D01* +X144142149Y-81229481D01* +X144781150Y-81229481D01* +X144781150Y-81416718D01* +X144817676Y-81600349D01* +X144889327Y-81773329D01* +X144889331Y-81773338D01* +X144945965Y-81858095D01* +X144993348Y-81929008D01* +X145125742Y-82061402D01* +X145190104Y-82104407D01* +X145281411Y-82165418D01* +X145281417Y-82165420D01* +X145281419Y-82165422D01* +X145454399Y-82237073D01* +X145638034Y-82273600D01* +X145638035Y-82273600D01* +X145825265Y-82273600D01* +X145825266Y-82273600D01* +X146008901Y-82237073D01* +X146181881Y-82165422D01* +X146181884Y-82165419D01* +X146181888Y-82165418D01* +X146228454Y-82134303D01* +X146337558Y-82061402D01* +X146469952Y-81929008D01* +X146563486Y-81789025D01* +X146573968Y-81773338D01* +X146573969Y-81773334D01* +X146573972Y-81773331D01* +X146631389Y-81634713D01* +X146671126Y-81588189D01* +X146722853Y-81573600D01* +X146883179Y-81573600D01* +X146941235Y-81549551D01* +X146975247Y-81535464D01* +X147045714Y-81464997D01* +X147083850Y-81372928D01* +X147083850Y-81330168D01* +X147086318Y-81322570D01* +X147085069Y-81314681D01* +X147095593Y-81294025D01* +X147102757Y-81271977D01* +X147112846Y-81260164D01* +X147152146Y-81220864D01* +X147206663Y-81193087D01* +X147267095Y-81202658D01* +X147310360Y-81245923D01* +X147321150Y-81290868D01* +X147321150Y-81416718D01* +X147357676Y-81600349D01* +X147429327Y-81773329D01* +X147429331Y-81773338D01* +X147485965Y-81858095D01* +X147533348Y-81929008D01* +X147665742Y-82061402D01* +X147730104Y-82104407D01* +X147821411Y-82165418D01* +X147821417Y-82165420D01* +X147821419Y-82165422D01* +X147994399Y-82237073D01* +X148178034Y-82273600D01* +X148178035Y-82273600D01* +X148365265Y-82273600D01* +X148365266Y-82273600D01* +X148548901Y-82237073D01* +X148721881Y-82165422D01* +X148721884Y-82165419D01* +X148721888Y-82165418D01* +X148768454Y-82134303D01* +X148877558Y-82061402D01* +X149009952Y-81929008D01* +X149103486Y-81789025D01* +X149113968Y-81773338D01* +X149113969Y-81773334D01* +X149113972Y-81773331D01* +X149185623Y-81600351D01* +X149222150Y-81416716D01* +X149222150Y-81229484D01* +X149222149Y-81229481D01* +X149861150Y-81229481D01* +X149861150Y-81416718D01* +X149897676Y-81600349D01* +X149969327Y-81773329D01* +X149969331Y-81773338D01* +X150025965Y-81858095D01* +X150073348Y-81929008D01* +X150205742Y-82061402D01* +X150270104Y-82104407D01* +X150361411Y-82165418D01* +X150361417Y-82165420D01* +X150361419Y-82165422D01* +X150534399Y-82237073D01* +X150718034Y-82273600D01* +X150718035Y-82273600D01* +X150905265Y-82273600D01* +X150905266Y-82273600D01* +X151088901Y-82237073D01* +X151261881Y-82165422D01* +X151261884Y-82165419D01* +X151261888Y-82165418D01* +X151308454Y-82134303D01* +X151417558Y-82061402D01* +X151549952Y-81929008D01* +X151643486Y-81789025D01* +X151653968Y-81773338D01* +X151653973Y-81773329D01* +X151701352Y-81658945D01* +X151741086Y-81612422D01* +X151800580Y-81598138D01* +X151857109Y-81621552D01* +X151862818Y-81626829D01* +X158200986Y-87964997D01* +X158200985Y-87964997D01* +X158271453Y-88035464D01* +X158363521Y-88073600D01* +X158363522Y-88073600D01* +X173534710Y-88073600D01* +X173592901Y-88092507D01* +X173628865Y-88142007D01* +X173628865Y-88203193D01* +X173604715Y-88242601D01* +X173550442Y-88296875D01* +X173550439Y-88296878D01* +X173460100Y-88432081D01* +X173397874Y-88582309D01* +X173366150Y-88741794D01* +X173366150Y-88904405D01* +X173397874Y-89063890D01* +X173460100Y-89214118D01* +X173533113Y-89323391D01* +X173550442Y-89349325D01* +X173665425Y-89464308D01* +X173800629Y-89554648D01* +X173800630Y-89554648D01* +X173800631Y-89554649D01* +X173802145Y-89555276D01* +X173950861Y-89616876D01* +X174110345Y-89648600D01* +X174110346Y-89648600D01* +X174272954Y-89648600D01* +X174272955Y-89648600D01* +X174432439Y-89616876D01* +X174582671Y-89554648D01* +X174717875Y-89464308D01* +X174832858Y-89349325D01* +X174923198Y-89214121D01* +X174985426Y-89063889D01* +X175017150Y-88904405D01* +X175017150Y-88741795D01* +X174985426Y-88582311D01* +X174935128Y-88460881D01* +X174923199Y-88432081D01* +X174901429Y-88399500D01* +X174832858Y-88296875D01* +X174778584Y-88242601D01* +X174750809Y-88188087D01* +X174760380Y-88127655D01* +X174803645Y-88084390D01* +X174848590Y-88073600D01* +X195884710Y-88073600D01* +X195942901Y-88092507D01* +X195978865Y-88142007D01* +X195978865Y-88203193D01* +X195954715Y-88242601D01* +X195900442Y-88296875D01* +X195900439Y-88296878D01* +X195810100Y-88432081D01* +X195747874Y-88582309D01* +X195716150Y-88741794D01* +X195716150Y-88904405D01* +X195747874Y-89063890D01* +X195810100Y-89214118D01* +X195883113Y-89323391D01* +X195900442Y-89349325D01* +X196015425Y-89464308D01* +X196150629Y-89554648D01* +X196150630Y-89554648D01* +X196150631Y-89554649D01* +X196152145Y-89555276D01* +X196300861Y-89616876D01* +X196460345Y-89648600D01* +X196460346Y-89648600D01* +X196622954Y-89648600D01* +X196622955Y-89648600D01* +X196782439Y-89616876D01* +X196932671Y-89554648D01* +X196953559Y-89540691D01* +X203449500Y-89540691D01* +X203449500Y-89659309D01* +X203468006Y-89728375D01* +X203480202Y-89773890D01* +X203539507Y-89876608D01* +X203539509Y-89876610D01* +X203539511Y-89876613D01* +X203623387Y-89960489D01* +X203623389Y-89960490D01* +X203623391Y-89960492D01* +X203726110Y-90019797D01* +X203726111Y-90019797D01* +X203726114Y-90019799D01* +X203840691Y-90050500D01* +X203840693Y-90050500D01* +X203959307Y-90050500D01* +X203959309Y-90050500D01* +X204073886Y-90019799D01* +X204073888Y-90019797D01* +X204073890Y-90019797D01* +X204176608Y-89960492D01* +X204176608Y-89960491D01* +X204176613Y-89960489D01* +X204260489Y-89876613D01* +X204304973Y-89799565D01* +X204319797Y-89773890D01* +X204319797Y-89773888D01* +X204319799Y-89773886D01* +X204350500Y-89659309D01* +X204350500Y-89540691D01* +X204319799Y-89426114D01* +X204319797Y-89426111D01* +X204319797Y-89426109D01* +X204260492Y-89323391D01* +X204260490Y-89323389D01* +X204260489Y-89323387D01* +X204176613Y-89239511D01* +X204176610Y-89239509D01* +X204176608Y-89239507D01* +X204073889Y-89180202D01* +X204073890Y-89180202D01* +X204060351Y-89176574D01* +X203959309Y-89149500D01* +X203840691Y-89149500D01* +X203799669Y-89160492D01* +X203726109Y-89180202D01* +X203623391Y-89239507D01* +X203539507Y-89323391D01* +X203480202Y-89426109D01* +X203475944Y-89442000D01* +X203449500Y-89540691D01* +X196953559Y-89540691D01* +X197067875Y-89464308D01* +X197182858Y-89349325D01* +X197273198Y-89214121D01* +X197335426Y-89063889D01* +X197367150Y-88904405D01* +X197367150Y-88741795D01* +X197366930Y-88740691D01* +X198399500Y-88740691D01* +X198399500Y-88859309D01* +X198411100Y-88902599D01* +X198430202Y-88973890D01* +X198489507Y-89076608D01* +X198489509Y-89076610D01* +X198489511Y-89076613D01* +X198573387Y-89160489D01* +X198573389Y-89160490D01* +X198573391Y-89160492D01* +X198676110Y-89219797D01* +X198676111Y-89219797D01* +X198676114Y-89219799D01* +X198790691Y-89250500D01* +X198790693Y-89250500D01* +X198909307Y-89250500D01* +X198909309Y-89250500D01* +X199023886Y-89219799D01* +X199023888Y-89219797D01* +X199023890Y-89219797D01* +X199126608Y-89160492D01* +X199126608Y-89160491D01* +X199126613Y-89160489D01* +X199210489Y-89076613D01* +X199262845Y-88985931D01* +X199269797Y-88973890D01* +X199269797Y-88973888D01* +X199269799Y-88973886D01* +X199300500Y-88859309D01* +X199300500Y-88740691D01* +X199269799Y-88626114D01* +X199269797Y-88626111D01* +X199269797Y-88626109D01* +X199210492Y-88523391D01* +X199210490Y-88523389D01* +X199210489Y-88523387D01* +X199126613Y-88439511D01* +X199126610Y-88439509D01* +X199126608Y-88439507D01* +X199023889Y-88380202D01* +X199023890Y-88380202D01* +X199010351Y-88376574D01* +X198909309Y-88349500D01* +X198790691Y-88349500D01* +X198720567Y-88368289D01* +X198676109Y-88380202D01* +X198573391Y-88439507D01* +X198489507Y-88523391D01* +X198430202Y-88626109D01* +X198413037Y-88690169D01* +X198399500Y-88740691D01* +X197366930Y-88740691D01* +X197335426Y-88582311D01* +X197285128Y-88460881D01* +X197273199Y-88432081D01* +X197251429Y-88399500D01* +X197182858Y-88296875D01* +X197128584Y-88242601D01* +X197100809Y-88188087D01* +X197110380Y-88127655D01* +X197153645Y-88084390D01* +X197198590Y-88073600D01* +X209021328Y-88073600D01* +X209079519Y-88092507D01* +X209112792Y-88134715D01* +X209180017Y-88297013D01* +X209180018Y-88297014D01* +X209289511Y-88460882D01* +X209428868Y-88600239D01* +X209592736Y-88709732D01* +X209774815Y-88785151D01* +X209968109Y-88823600D01* +X209968110Y-88823600D01* +X210415190Y-88823600D01* +X210415191Y-88823600D01* +X210608485Y-88785151D01* +X210790564Y-88709732D01* +X210954432Y-88600239D01* +X211093789Y-88460882D01* +X211203282Y-88297014D01* +X211278701Y-88114935D01* +X211317150Y-87921641D01* +X211317150Y-87724559D01* +X211278701Y-87531265D01* +X211203282Y-87349186D01* +X211093789Y-87185318D01* +X210954432Y-87045961D01* +X210790564Y-86936468D01* +X210790565Y-86936468D01* +X210790563Y-86936467D01* +X210608485Y-86861049D01* +X210415193Y-86822600D01* +X210415191Y-86822600D01* +X209968109Y-86822600D01* +X209968106Y-86822600D01* +X209774815Y-86861049D01* +X209774813Y-86861049D01* +X209592736Y-86936467D01* +X209428868Y-87045961D01* +X209428864Y-87045964D01* +X209289514Y-87185314D01* +X209289511Y-87185318D01* +X209180017Y-87349186D01* +X209112792Y-87511485D01* +X209073056Y-87558011D01* +X209021328Y-87572600D01* +X197198590Y-87572600D01* +X197140399Y-87553693D01* +X197104435Y-87504193D01* +X197104435Y-87443007D01* +X197128584Y-87403598D01* +X197182858Y-87349325D01* +X197273198Y-87214121D01* +X197335426Y-87063889D01* +X197367150Y-86904405D01* +X197367150Y-86741795D01* +X197335426Y-86582311D01* +X197273198Y-86432079D01* +X197182858Y-86296875D01* +X197067875Y-86181892D01* +X197067869Y-86181888D01* +X196941235Y-86097274D01* +X196932908Y-86086711D01* +X196921394Y-86079763D01* +X196914433Y-86063277D01* +X196903355Y-86049224D01* +X196902827Y-86035785D01* +X196897596Y-86023395D01* +X196901655Y-86005965D01* +X196901055Y-85990691D01* +X203449500Y-85990691D01* +X203449500Y-86109309D01* +X203468948Y-86181888D01* +X203480202Y-86223890D01* +X203539507Y-86326608D01* +X203539509Y-86326610D01* +X203539511Y-86326613D01* +X203623387Y-86410489D01* +X203623389Y-86410490D01* +X203623391Y-86410492D01* +X203726110Y-86469797D01* +X203726111Y-86469797D01* +X203726114Y-86469799D01* +X203840691Y-86500500D01* +X203840693Y-86500500D01* +X203959307Y-86500500D01* +X203959309Y-86500500D01* +X204073886Y-86469799D01* +X204073888Y-86469797D01* +X204073890Y-86469797D01* +X204176608Y-86410492D01* +X204176608Y-86410491D01* +X204176613Y-86410489D01* +X204260489Y-86326613D01* +X204277657Y-86296878D01* +X204319797Y-86223890D01* +X204319797Y-86223888D01* +X204319799Y-86223886D01* +X204350500Y-86109309D01* +X204350500Y-85990691D01* +X204319799Y-85876114D01* +X204319797Y-85876111D01* +X204319797Y-85876109D01* +X204260492Y-85773391D01* +X204260490Y-85773389D01* +X204260489Y-85773387D01* +X204176613Y-85689511D01* +X204176610Y-85689509D01* +X204176608Y-85689507D01* +X204073889Y-85630202D01* +X204073890Y-85630202D01* +X204060351Y-85626574D01* +X203959309Y-85599500D01* +X203840691Y-85599500D01* +X203775847Y-85616875D01* +X203726109Y-85630202D01* +X203623391Y-85689507D01* +X203539507Y-85773391D01* +X203480202Y-85876109D01* +X203467436Y-85923753D01* +X203449500Y-85990691D01* +X196901055Y-85990691D01* +X196900953Y-85988086D01* +X196908423Y-85976905D01* +X196911475Y-85963805D01* +X196923617Y-85954165D01* +X196934946Y-85937212D01* +X196957730Y-85923753D01* +X197027306Y-85894378D01* +X197157487Y-85828047D01* +X197178080Y-85813084D01* +X196588096Y-85223100D01* +X196594311Y-85223100D01* +X196696044Y-85195841D01* +X196787256Y-85143180D01* +X196861730Y-85068706D01* +X196914391Y-84977494D01* +X196941650Y-84875761D01* +X196941650Y-84869546D01* +X197531634Y-85459530D01* +X197546597Y-85438937D01* +X197630565Y-85274141D01* +X197687717Y-85098243D01* +X197716650Y-84915577D01* +X197716650Y-84730622D01* +X197687718Y-84547958D01* +X197644451Y-84414795D01* +X197644451Y-84414794D01* +X197636619Y-84390691D01* +X199599500Y-84390691D01* +X199599500Y-84509309D01* +X199625089Y-84604808D01* +X199630202Y-84623890D01* +X199689507Y-84726608D01* +X199689509Y-84726610D01* +X199689511Y-84726613D01* +X199773387Y-84810489D01* +X199773389Y-84810490D01* +X199773391Y-84810492D01* +X199876110Y-84869797D01* +X199876111Y-84869797D01* +X199876114Y-84869799D01* +X199990691Y-84900500D01* +X199990693Y-84900500D01* +X200109307Y-84900500D01* +X200109309Y-84900500D01* +X200223886Y-84869799D01* +X200223888Y-84869797D01* +X200223890Y-84869797D01* +X200326608Y-84810492D01* +X200326608Y-84810491D01* +X200326613Y-84810489D01* +X200410489Y-84726613D01* +X200459168Y-84642299D01* +X200469797Y-84623890D01* +X200469797Y-84623888D01* +X200469799Y-84623886D01* +X200500500Y-84509309D01* +X200500500Y-84390691D01* +X200469799Y-84276114D01* +X200469797Y-84276111D01* +X200469797Y-84276109D01* +X200410492Y-84173391D01* +X200410490Y-84173389D01* +X200410489Y-84173387D01* +X200326613Y-84089511D01* +X200326610Y-84089509D01* +X200326608Y-84089507D01* +X200223889Y-84030202D01* +X200223890Y-84030202D01* +X200210351Y-84026574D01* +X200109309Y-83999500D01* +X199990691Y-83999500D01* +X199920567Y-84018289D01* +X199876109Y-84030202D01* +X199773391Y-84089507D01* +X199689507Y-84173391D01* +X199630202Y-84276109D01* +X199614387Y-84335134D01* +X199599500Y-84390691D01* +X197636619Y-84390691D01* +X197630565Y-84372058D01* +X197546603Y-84207272D01* +X197546598Y-84207264D01* +X197531634Y-84186668D01* +X196941650Y-84776652D01* +X196941650Y-84770439D01* +X196914391Y-84668706D01* +X196861730Y-84577494D01* +X196787256Y-84503020D01* +X196696044Y-84450359D01* +X196594311Y-84423100D01* +X196588094Y-84423100D01* +X197178080Y-83833114D01* +X197157485Y-83818151D01* +X197157477Y-83818146D01* +X196992693Y-83734185D01* +X196965643Y-83725396D01* +X196916143Y-83689432D01* +X196897236Y-83631241D01* +X196916143Y-83573050D01* +X196941232Y-83548927D01* +X197067875Y-83464308D01* +X197182858Y-83349325D01* +X197273198Y-83214121D01* +X197335426Y-83063889D01* +X197367150Y-82904405D01* +X197367150Y-82741795D01* +X197335426Y-82582311D01* +X197294203Y-82482790D01* +X197273199Y-82432081D01* +X197255424Y-82405479D01* +X197182858Y-82296875D01* +X197067875Y-82181892D01* +X197067869Y-82181888D01* +X196932668Y-82091550D01* +X196782440Y-82029324D01* +X196622955Y-81997600D01* +X196460345Y-81997600D01* +X196460344Y-81997600D01* +X196300859Y-82029324D01* +X196150631Y-82091550D01* +X196015428Y-82181889D01* +X195900439Y-82296878D01* +X195810100Y-82432081D01* +X195747874Y-82582309D01* +X195716150Y-82741794D01* +X195716150Y-82904405D01* +X195747874Y-83063890D01* +X195810100Y-83214118D01* +X195825247Y-83236788D01* +X195900442Y-83349325D01* +X196015425Y-83464308D01* +X196015428Y-83464310D01* +X196142064Y-83548925D01* +X196179944Y-83596975D01* +X196182346Y-83658113D01* +X196148354Y-83708987D01* +X196117657Y-83725395D01* +X196090610Y-83734183D01* +X195925818Y-83818148D01* +X195905218Y-83833114D01* +X196495204Y-84423100D01* +X196488989Y-84423100D01* +X196387256Y-84450359D01* +X196296044Y-84503020D01* +X196221570Y-84577494D01* +X196168909Y-84668706D01* +X196141650Y-84770439D01* +X196141650Y-84776654D01* +X195551664Y-84186668D01* +X195536698Y-84207268D01* +X195452734Y-84372058D01* +X195395582Y-84547956D01* +X195366650Y-84730622D01* +X195366650Y-84915577D01* +X195395582Y-85098243D01* +X195452734Y-85274141D01* +X195536696Y-85438927D01* +X195536701Y-85438935D01* +X195551664Y-85459529D01* +X196141650Y-84869543D01* +X196141650Y-84875761D01* +X196168909Y-84977494D01* +X196221570Y-85068706D01* +X196296044Y-85143180D01* +X196387256Y-85195841D01* +X196488989Y-85223100D01* +X196495202Y-85223100D01* +X195905218Y-85813084D01* +X195925814Y-85828048D01* +X195925822Y-85828053D01* +X196090610Y-85912016D01* +X196090608Y-85912016D01* +X196117654Y-85920803D01* +X196167155Y-85956766D01* +X196186063Y-86014956D01* +X196167157Y-86073147D01* +X196142065Y-86097273D01* +X196015429Y-86181888D01* +X195900439Y-86296878D01* +X195810100Y-86432081D01* +X195747874Y-86582309D01* +X195716150Y-86741794D01* +X195716150Y-86904405D01* +X195747874Y-87063890D01* +X195810100Y-87214118D01* +X195810101Y-87214120D01* +X195810102Y-87214121D01* +X195900442Y-87349325D01* +X195954715Y-87403598D01* +X195982491Y-87458113D01* +X195972920Y-87518545D01* +X195929655Y-87561810D01* +X195884710Y-87572600D01* +X174848590Y-87572600D01* +X174790399Y-87553693D01* +X174754435Y-87504193D01* +X174754435Y-87443007D01* +X174778584Y-87403598D01* +X174832858Y-87349325D01* +X174923198Y-87214121D01* +X174985426Y-87063889D01* +X175017150Y-86904405D01* +X175017150Y-86790691D01* +X193399500Y-86790691D01* +X193399500Y-86909309D01* +X193426574Y-87010351D01* +X193430202Y-87023890D01* +X193489507Y-87126608D01* +X193489509Y-87126610D01* +X193489511Y-87126613D01* +X193573387Y-87210489D01* +X193573389Y-87210490D01* +X193573391Y-87210492D01* +X193676110Y-87269797D01* +X193676111Y-87269797D01* +X193676114Y-87269799D01* +X193790691Y-87300500D01* +X193790693Y-87300500D01* +X193909307Y-87300500D01* +X193909309Y-87300500D01* +X194023886Y-87269799D01* +X194023888Y-87269797D01* +X194023890Y-87269797D01* +X194126608Y-87210492D01* +X194126608Y-87210491D01* +X194126613Y-87210489D01* +X194210489Y-87126613D01* +X194210492Y-87126608D01* +X194269797Y-87023890D01* +X194269797Y-87023888D01* +X194269799Y-87023886D01* +X194300500Y-86909309D01* +X194300500Y-86790691D01* +X194269799Y-86676114D01* +X194269797Y-86676111D01* +X194269797Y-86676109D01* +X194210492Y-86573391D01* +X194210490Y-86573389D01* +X194210489Y-86573387D01* +X194126613Y-86489511D01* +X194126610Y-86489509D01* +X194126608Y-86489507D01* +X194023889Y-86430202D01* +X194023890Y-86430202D01* +X194010351Y-86426574D01* +X193909309Y-86399500D01* +X193790691Y-86399500D01* +X193749669Y-86410492D01* +X193676109Y-86430202D01* +X193573391Y-86489507D01* +X193489507Y-86573391D01* +X193430202Y-86676109D01* +X193430201Y-86676114D01* +X193399500Y-86790691D01* +X175017150Y-86790691D01* +X175017150Y-86741795D01* +X174985426Y-86582311D01* +X174923198Y-86432079D01* +X174832858Y-86296875D01* +X174717875Y-86181892D01* +X174717869Y-86181888D01* +X174582668Y-86091550D01* +X174432440Y-86029324D01* +X174272955Y-85997600D01* +X174110345Y-85997600D01* +X174110344Y-85997600D01* +X173950859Y-86029324D01* +X173800631Y-86091550D01* +X173665428Y-86181889D01* +X173550439Y-86296878D01* +X173460100Y-86432081D01* +X173397874Y-86582309D01* +X173366150Y-86741794D01* +X173366150Y-86904405D01* +X173397874Y-87063890D01* +X173460100Y-87214118D01* +X173460101Y-87214120D01* +X173460102Y-87214121D01* +X173550442Y-87349325D01* +X173604715Y-87403598D01* +X173632491Y-87458113D01* +X173622920Y-87518545D01* +X173579655Y-87561810D01* +X173534710Y-87572600D01* +X158558119Y-87572600D01* +X158499928Y-87553693D01* +X158488115Y-87543604D01* +X155648717Y-84704206D01* +X155585202Y-84640691D01* +X167399500Y-84640691D01* +X167399500Y-84759309D01* +X167404696Y-84778700D01* +X167430202Y-84873890D01* +X167489507Y-84976608D01* +X167489509Y-84976610D01* +X167489511Y-84976613D01* +X167573387Y-85060489D01* +X167573389Y-85060490D01* +X167573391Y-85060492D01* +X167676110Y-85119797D01* +X167676111Y-85119797D01* +X167676114Y-85119799D01* +X167790691Y-85150500D01* +X167790693Y-85150500D01* +X167909307Y-85150500D01* +X167909309Y-85150500D01* +X168023886Y-85119799D01* +X168023888Y-85119797D01* +X168023890Y-85119797D01* +X168126608Y-85060492D01* +X168126608Y-85060491D01* +X168126613Y-85060489D01* +X168210489Y-84976613D01* +X168210492Y-84976608D01* +X168269797Y-84873890D01* +X168269797Y-84873888D01* +X168269799Y-84873886D01* +X168300500Y-84759309D01* +X168300500Y-84741794D01* +X173366150Y-84741794D01* +X173366150Y-84904405D01* +X173397874Y-85063890D01* +X173460100Y-85214118D01* +X173460101Y-85214120D01* +X173460102Y-85214121D01* +X173550442Y-85349325D01* +X173665425Y-85464308D01* +X173800629Y-85554648D01* +X173950861Y-85616876D01* +X174110345Y-85648600D01* +X174110346Y-85648600D01* +X174272954Y-85648600D01* +X174272955Y-85648600D01* +X174432439Y-85616876D01* +X174582671Y-85554648D01* +X174717875Y-85464308D01* +X174832858Y-85349325D01* +X174923198Y-85214121D01* +X174985426Y-85063889D01* +X175017150Y-84904405D01* +X175017150Y-84741795D01* +X174985426Y-84582311D01* +X174930770Y-84450359D01* +X174923199Y-84432081D01* +X174911648Y-84414794D01* +X174832858Y-84296875D01* +X174717875Y-84181892D01* +X174705152Y-84173391D01* +X174582668Y-84091550D01* +X174432440Y-84029324D01* +X174272955Y-83997600D01* +X174110345Y-83997600D01* +X174110344Y-83997600D01* +X173950859Y-84029324D01* +X173800631Y-84091550D01* +X173665428Y-84181889D01* +X173550439Y-84296878D01* +X173460100Y-84432081D01* +X173397874Y-84582309D01* +X173366150Y-84741794D01* +X168300500Y-84741794D01* +X168300500Y-84640691D01* +X168269799Y-84526114D01* +X168269797Y-84526111D01* +X168269797Y-84526109D01* +X168210492Y-84423391D01* +X168210490Y-84423389D01* +X168210489Y-84423387D01* +X168126613Y-84339511D01* +X168126610Y-84339509D01* +X168126608Y-84339507D01* +X168023889Y-84280202D01* +X168023890Y-84280202D01* +X167981680Y-84268892D01* +X167909309Y-84249500D01* +X167790691Y-84249500D01* +X167720567Y-84268289D01* +X167676109Y-84280202D01* +X167573391Y-84339507D01* +X167489507Y-84423391D01* +X167430202Y-84526109D01* +X167415143Y-84582311D01* +X167399500Y-84640691D01* +X155585202Y-84640691D01* +X154713324Y-83768813D01* +X152055247Y-81110736D01* +X152055245Y-81110735D01* +X152055244Y-81110734D01* +X151963179Y-81072600D01* +X151963178Y-81072600D01* +X151802853Y-81072600D01* +X151744662Y-81053693D01* +X151711389Y-81011486D01* +X151704045Y-80993756D01* +X151653972Y-80872869D01* +X151653970Y-80872866D01* +X151653968Y-80872862D01* +X151593080Y-80781738D01* +X151576983Y-80757647D01* +X151549952Y-80717192D01* +X151417558Y-80584798D01* +X151363854Y-80548914D01* +X151261888Y-80480781D01* +X151261879Y-80480777D01* +X151088899Y-80409126D01* +X150905268Y-80372600D01* +X150905266Y-80372600D01* +X150718034Y-80372600D01* +X150718031Y-80372600D01* +X150534400Y-80409126D01* +X150361420Y-80480777D01* +X150361411Y-80480781D01* +X150205742Y-80584798D01* +X150205738Y-80584801D01* +X150073351Y-80717188D01* +X150073348Y-80717192D01* +X149969331Y-80872861D01* +X149969327Y-80872870D01* +X149897676Y-81045850D01* +X149861150Y-81229481D01* +X149222149Y-81229481D01* +X149185623Y-81045849D01* +X149113972Y-80872869D01* +X149113970Y-80872867D01* +X149113968Y-80872861D01* +X149036983Y-80757647D01* +X149009952Y-80717192D01* +X148877558Y-80584798D01* +X148823854Y-80548914D01* +X148721888Y-80480781D01* +X148721879Y-80480777D01* +X148548899Y-80409126D01* +X148365268Y-80372600D01* +X148365266Y-80372600D01* +X148239418Y-80372600D01* +X148181227Y-80353693D01* +X148145263Y-80304193D01* +X148145263Y-80243007D01* +X148169414Y-80203596D01* +X149402019Y-78970991D01* +X166347550Y-78970991D01* +X166347550Y-79089609D01* +X166374624Y-79190651D01* +X166378252Y-79204190D01* +X166437557Y-79306908D01* +X166437559Y-79306910D01* +X166437561Y-79306913D01* +X166521437Y-79390789D01* +X166521439Y-79390790D01* +X166521441Y-79390792D01* +X166624160Y-79450097D01* +X166624161Y-79450097D01* +X166624164Y-79450099D01* +X166738741Y-79480800D01* +X166738743Y-79480800D01* +X166857357Y-79480800D01* +X166857359Y-79480800D01* +X166971936Y-79450099D01* +X166971938Y-79450097D01* +X166971940Y-79450097D01* +X167074658Y-79390792D01* +X167074658Y-79390791D01* +X167074663Y-79390789D01* +X167158539Y-79306913D01* +X167217849Y-79204186D01* +X167248550Y-79089609D01* +X167248550Y-78970991D01* +X167217849Y-78856414D01* +X167217847Y-78856411D01* +X167217847Y-78856409D01* +X167158542Y-78753691D01* +X167158540Y-78753689D01* +X167158539Y-78753687D01* +X167074663Y-78669811D01* +X167074660Y-78669809D01* +X167074658Y-78669807D01* +X166971939Y-78610502D01* +X166971940Y-78610502D01* +X166958401Y-78606874D01* +X166857359Y-78579800D01* +X166738741Y-78579800D01* +X166668617Y-78598589D01* +X166624159Y-78610502D01* +X166521441Y-78669807D01* +X166437557Y-78753691D01* +X166378252Y-78856409D01* +X166378251Y-78856414D01* +X166347550Y-78970991D01* +X149402019Y-78970991D01* +X150595919Y-77777091D01* +X162882850Y-77777091D01* +X162882850Y-77895709D01* +X162903614Y-77973199D01* +X162913552Y-78010290D01* +X162972857Y-78113008D01* +X162972859Y-78113010D01* +X162972861Y-78113013D01* +X163056737Y-78196889D01* +X163056739Y-78196890D01* +X163056741Y-78196892D01* +X163159460Y-78256197D01* +X163159461Y-78256197D01* +X163159464Y-78256199D01* +X163274041Y-78286900D01* +X163274043Y-78286900D01* +X163392657Y-78286900D01* +X163392659Y-78286900D01* +X163507236Y-78256199D01* +X163507238Y-78256197D01* +X163507240Y-78256197D01* +X163609958Y-78196892D01* +X163609958Y-78196891D01* +X163609963Y-78196889D01* +X163690957Y-78115894D01* +X163745472Y-78088119D01* +X163760959Y-78086900D01* +X173060181Y-78086900D01* +X173118372Y-78105807D01* +X173130185Y-78115896D01* +X173409304Y-78395015D01* +X173437081Y-78449532D01* +X173430765Y-78502903D01* +X173397874Y-78582311D01* +X173366150Y-78741794D01* +X173366150Y-78904405D01* +X173397874Y-79063890D01* +X173460100Y-79214118D01* +X173549419Y-79347795D01* +X173550442Y-79349325D01* +X173665425Y-79464308D01* +X173665428Y-79464310D01* +X173792064Y-79548925D01* +X173829944Y-79596975D01* +X173832346Y-79658113D01* +X173798354Y-79708987D01* +X173767657Y-79725395D01* +X173740610Y-79734183D01* +X173575818Y-79818148D01* +X173555218Y-79833114D01* +X174145204Y-80423100D01* +X174138989Y-80423100D01* +X174037256Y-80450359D01* +X173946044Y-80503020D01* +X173871570Y-80577494D01* +X173818909Y-80668706D01* +X173791650Y-80770439D01* +X173791650Y-80776654D01* +X173201664Y-80186668D01* +X173186698Y-80207268D01* +X173102734Y-80372058D01* +X173045582Y-80547956D01* +X173016650Y-80730622D01* +X173016650Y-80915577D01* +X173045582Y-81098243D01* +X173102734Y-81274141D01* +X173186696Y-81438927D01* +X173186701Y-81438935D01* +X173201664Y-81459529D01* +X173791650Y-80869543D01* +X173791650Y-80875761D01* +X173818909Y-80977494D01* +X173871570Y-81068706D01* +X173946044Y-81143180D01* +X174037256Y-81195841D01* +X174138989Y-81223100D01* +X174145202Y-81223100D01* +X173555218Y-81813084D01* +X173575814Y-81828048D01* +X173575822Y-81828053D01* +X173740610Y-81912016D01* +X173740608Y-81912016D01* +X173767654Y-81920803D01* +X173817155Y-81956766D01* +X173836063Y-82014956D01* +X173817157Y-82073147D01* +X173792065Y-82097273D01* +X173665429Y-82181888D01* +X173550439Y-82296878D01* +X173460100Y-82432081D01* +X173397874Y-82582309D01* +X173366150Y-82741794D01* +X173366150Y-82904405D01* +X173397874Y-83063890D01* +X173460100Y-83214118D01* +X173475247Y-83236788D01* +X173550442Y-83349325D01* +X173665425Y-83464308D01* +X173800629Y-83554648D01* +X173950861Y-83616876D01* +X174110345Y-83648600D01* +X174110346Y-83648600D01* +X174272954Y-83648600D01* +X174272955Y-83648600D01* +X174432439Y-83616876D01* +X174582671Y-83554648D01* +X174717875Y-83464308D01* +X174832858Y-83349325D01* +X174923198Y-83214121D01* +X174985426Y-83063889D01* +X175017150Y-82904405D01* +X175017150Y-82741795D01* +X174985426Y-82582311D01* +X174944203Y-82482790D01* +X174923199Y-82432081D01* +X174905424Y-82405479D01* +X174832858Y-82296875D01* +X174717875Y-82181892D01* +X174717869Y-82181888D01* +X174591235Y-82097274D01* +X174553355Y-82049224D01* +X174550953Y-81988086D01* +X174584946Y-81937212D01* +X174615646Y-81920803D01* +X174642688Y-81912017D01* +X174642689Y-81912016D01* +X174807487Y-81828047D01* +X174828080Y-81813084D01* +X174238096Y-81223100D01* +X174244311Y-81223100D01* +X174346044Y-81195841D01* +X174437256Y-81143180D01* +X174511730Y-81068706D01* +X174564391Y-80977494D01* +X174591650Y-80875761D01* +X174591650Y-80869546D01* +X175181634Y-81459530D01* +X175196597Y-81438937D01* +X175280565Y-81274141D01* +X175337717Y-81098243D01* +X175366650Y-80915577D01* +X175366650Y-80741794D01* +X195716150Y-80741794D01* +X195716150Y-80904405D01* +X195747874Y-81063890D01* +X195810100Y-81214118D01* +X195887641Y-81330168D01* +X195900442Y-81349325D01* +X196015425Y-81464308D01* +X196150629Y-81554648D01* +X196300861Y-81616876D01* +X196460345Y-81648600D01* +X196460346Y-81648600D01* +X196622954Y-81648600D01* +X196622955Y-81648600D01* +X196782439Y-81616876D01* +X196932671Y-81554648D01* +X197067875Y-81464308D01* +X197182858Y-81349325D01* +X197273198Y-81214121D01* +X197335426Y-81063889D01* +X197367150Y-80904405D01* +X197367150Y-80741795D01* +X197335426Y-80582311D01* +X197280770Y-80450359D01* +X197273199Y-80432081D01* +X197233455Y-80372600D01* +X197182858Y-80296875D01* +X197067875Y-80181892D01* +X196932671Y-80091552D01* +X196932670Y-80091551D01* +X196932668Y-80091550D01* +X196782440Y-80029324D01* +X196622955Y-79997600D01* +X196460345Y-79997600D01* +X196460344Y-79997600D01* +X196300859Y-80029324D01* +X196150631Y-80091550D01* +X196015428Y-80181889D01* +X195900439Y-80296878D01* +X195810100Y-80432081D01* +X195747874Y-80582309D01* +X195716150Y-80741794D01* +X175366650Y-80741794D01* +X175366650Y-80730622D01* +X175337717Y-80547956D01* +X175280565Y-80372058D01* +X175196603Y-80207272D01* +X175196598Y-80207264D01* +X175181634Y-80186668D01* +X174591650Y-80776652D01* +X174591650Y-80770439D01* +X174564391Y-80668706D01* +X174511730Y-80577494D01* +X174437256Y-80503020D01* +X174346044Y-80450359D01* +X174244311Y-80423100D01* +X174238094Y-80423100D01* +X174828080Y-79833114D01* +X174807485Y-79818151D01* +X174807477Y-79818146D01* +X174642693Y-79734185D01* +X174615643Y-79725396D01* +X174566143Y-79689432D01* +X174547236Y-79631241D01* +X174566143Y-79573050D01* +X174591232Y-79548927D01* +X174717875Y-79464308D01* +X174832858Y-79349325D01* +X174923198Y-79214121D01* +X174985426Y-79063889D01* +X175017150Y-78904405D01* +X175017150Y-78741795D01* +X175017150Y-78741794D01* +X195716150Y-78741794D01* +X195716150Y-78904405D01* +X195747874Y-79063890D01* +X195810100Y-79214118D01* +X195899419Y-79347795D01* +X195900442Y-79349325D01* +X196015425Y-79464308D01* +X196150629Y-79554648D01* +X196300861Y-79616876D01* +X196460345Y-79648600D01* +X196460346Y-79648600D01* +X196622954Y-79648600D01* +X196622955Y-79648600D01* +X196782439Y-79616876D01* +X196932671Y-79554648D01* +X197067875Y-79464308D01* +X197182858Y-79349325D01* +X197273198Y-79214121D01* +X197335426Y-79063889D01* +X197367150Y-78904405D01* +X197367150Y-78741795D01* +X197335426Y-78582311D01* +X197280427Y-78449532D01* +X197273199Y-78432081D01* +X197248432Y-78395015D01* +X197182858Y-78296875D01* +X197067875Y-78181892D01* +X196932671Y-78091552D01* +X196932670Y-78091551D01* +X196932668Y-78091550D01* +X196782440Y-78029324D01* +X196622955Y-77997600D01* +X196460345Y-77997600D01* +X196460344Y-77997600D01* +X196300859Y-78029324D01* +X196150631Y-78091550D01* +X196015428Y-78181889D01* +X195900439Y-78296878D01* +X195810100Y-78432081D01* +X195747874Y-78582309D01* +X195716150Y-78741794D01* +X175017150Y-78741794D01* +X174985426Y-78582311D01* +X174930427Y-78449532D01* +X174923199Y-78432081D01* +X174898432Y-78395015D01* +X174832858Y-78296875D01* +X174717875Y-78181892D01* +X174582671Y-78091552D01* +X174582670Y-78091551D01* +X174582668Y-78091550D01* +X174432440Y-78029324D01* +X174272955Y-77997600D01* +X174110345Y-77997600D01* +X174110344Y-77997600D01* +X173950861Y-78029324D01* +X173871453Y-78062215D01* +X173810456Y-78067014D01* +X173763565Y-78040754D01* +X173586324Y-77863513D01* +X173586322Y-77863510D01* +X173346846Y-77624035D01* +X173254779Y-77585900D01* +X173254778Y-77585900D01* +X163760959Y-77585900D01* +X163702768Y-77566993D01* +X163690961Y-77556909D01* +X163609963Y-77475911D01* +X163609960Y-77475909D01* +X163609958Y-77475907D01* +X163507239Y-77416602D01* +X163507240Y-77416602D01* +X163493701Y-77412974D01* +X163392659Y-77385900D01* +X163274041Y-77385900D01* +X163203917Y-77404689D01* +X163159459Y-77416602D01* +X163056741Y-77475907D01* +X162972857Y-77559791D01* +X162913552Y-77662509D01* +X162913551Y-77662514D01* +X162882850Y-77777091D01* +X150595919Y-77777091D01* +X151270414Y-77102596D01* +X151324931Y-77074819D01* +X151340418Y-77073600D01* +X173335746Y-77073600D01* +X173393937Y-77092507D01* +X173427210Y-77134714D01* +X173460101Y-77214120D01* +X173532918Y-77323099D01* +X173550442Y-77349325D01* +X173665425Y-77464308D01* +X173800629Y-77554648D01* +X173800630Y-77554648D01* +X173800631Y-77554649D01* +X173875745Y-77585762D01* +X173950861Y-77616876D01* +X174110345Y-77648600D01* +X174110346Y-77648600D01* +X174272954Y-77648600D01* +X174272955Y-77648600D01* +X174432439Y-77616876D01* +X174582671Y-77554648D01* +X174717875Y-77464308D01* +X174832858Y-77349325D01* +X174923198Y-77214121D01* +X174985426Y-77063889D01* +X175017150Y-76904405D01* +X175017150Y-76741795D01* +X174985426Y-76582311D01* +X174923198Y-76432079D01* +X174832858Y-76296875D01* +X174717875Y-76181892D01* +X174716568Y-76181019D01* +X174582668Y-76091550D01* +X174432440Y-76029324D01* +X174272955Y-75997600D01* +X174110345Y-75997600D01* +X174110344Y-75997600D01* +X173950859Y-76029324D01* +X173800631Y-76091550D01* +X173665428Y-76181889D01* +X173550439Y-76296878D01* +X173460101Y-76432079D01* +X173427210Y-76511486D01* +X173387473Y-76558012D01* +X173335746Y-76572600D01* +X151145821Y-76572600D01* +X151053753Y-76610735D01* +X150983285Y-76681202D01* +X150983286Y-76681203D01* +X150983285Y-76681204D01* +X146742487Y-80922001D01* +X146687970Y-80949778D01* +X146627538Y-80940207D01* +X146584273Y-80896942D01* +X146581023Y-80889892D01* +X146573972Y-80872869D01* +X146573967Y-80872862D01* +X146524216Y-80798404D01* +X146469952Y-80717192D01* +X146337558Y-80584798D01* +X146283854Y-80548914D01* +X146181888Y-80480781D01* +X146181879Y-80480777D01* +X146008899Y-80409126D01* +X145825268Y-80372600D01* +X145825266Y-80372600D01* +X145638034Y-80372600D01* +X145638031Y-80372600D01* +X145454400Y-80409126D01* +X145281420Y-80480777D01* +X145281411Y-80480781D01* +X145125742Y-80584798D01* +X145125738Y-80584801D01* +X144993351Y-80717188D01* +X144993348Y-80717192D01* +X144889331Y-80872861D01* +X144889327Y-80872870D01* +X144817676Y-81045850D01* +X144781150Y-81229481D01* +X144142149Y-81229481D01* +X144105623Y-81045849D01* +X144033972Y-80872869D01* +X144033970Y-80872867D01* +X144033968Y-80872861D01* +X143956983Y-80757647D01* +X143929952Y-80717192D01* +X143797558Y-80584798D01* +X143743854Y-80548914D01* +X143641888Y-80480781D01* +X143641879Y-80480777D01* +X143468899Y-80409126D01* +X143285268Y-80372600D01* +X143285266Y-80372600D01* +X143098034Y-80372600D01* +X143098031Y-80372600D01* +X142914400Y-80409126D01* +X142741420Y-80480777D01* +X142741411Y-80480781D01* +X142585742Y-80584798D01* +X142585738Y-80584801D01* +X142453351Y-80717188D01* +X142453348Y-80717192D01* +X142349331Y-80872861D01* +X142349327Y-80872870D01* +X142277676Y-81045850D01* +X142241150Y-81229481D01* +X141602149Y-81229481D01* +X141565623Y-81045849D01* +X141493972Y-80872869D01* +X141493970Y-80872867D01* +X141493968Y-80872861D01* +X141416983Y-80757647D01* +X141389952Y-80717192D01* +X141257558Y-80584798D01* +X141203854Y-80548914D01* +X141101888Y-80480781D01* +X141101879Y-80480777D01* +X140928899Y-80409126D01* +X140745268Y-80372600D01* +X140745266Y-80372600D01* +X140558034Y-80372600D01* +X140558031Y-80372600D01* +X140374400Y-80409126D01* +X140201420Y-80480777D01* +X140201411Y-80480781D01* +X140045742Y-80584798D01* +X140045738Y-80584801D01* +X139913351Y-80717188D01* +X139913348Y-80717192D01* +X139809331Y-80872861D01* +X139809327Y-80872870D01* +X139737676Y-81045850D01* +X139701150Y-81229481D01* +X139062149Y-81229481D01* +X139025623Y-81045849D01* +X138953972Y-80872869D01* +X138953970Y-80872867D01* +X138953968Y-80872861D01* +X138876983Y-80757647D01* +X138849952Y-80717192D01* +X138717558Y-80584798D01* +X138663854Y-80548914D01* +X138561888Y-80480781D01* +X138561879Y-80480777D01* +X138388899Y-80409126D01* +X138205268Y-80372600D01* +X138205266Y-80372600D01* +X138018034Y-80372600D01* +X138018031Y-80372600D01* +X137834400Y-80409126D01* +X137661420Y-80480777D01* +X137661411Y-80480781D01* +X137505742Y-80584798D01* +X137505738Y-80584801D01* +X137373351Y-80717188D01* +X137373348Y-80717192D01* +X137269331Y-80872861D01* +X137269327Y-80872870D01* +X137197676Y-81045850D01* +X137161150Y-81229481D01* +X136522149Y-81229481D01* +X136485623Y-81045849D01* +X136413972Y-80872869D01* +X136413970Y-80872867D01* +X136413968Y-80872861D01* +X136336983Y-80757647D01* +X136309952Y-80717192D01* +X136177558Y-80584798D01* +X136123854Y-80548914D01* +X136021888Y-80480781D01* +X136021879Y-80480777D01* +X135848899Y-80409126D01* +X135665268Y-80372600D01* +X135665266Y-80372600D01* +X135478034Y-80372600D01* +X135478031Y-80372600D01* +X135294400Y-80409126D01* +X135121420Y-80480777D01* +X135121411Y-80480781D01* +X134965742Y-80584798D01* +X134965738Y-80584801D01* +X134833351Y-80717188D01* +X134833348Y-80717192D01* +X134729331Y-80872861D01* +X134729327Y-80872870D01* +X134657676Y-81045850D01* +X134621150Y-81229481D01* +X133982149Y-81229481D01* +X133945623Y-81045849D01* +X133873972Y-80872869D01* +X133873970Y-80872867D01* +X133873968Y-80872861D01* +X133796983Y-80757647D01* +X133769952Y-80717192D01* +X133637558Y-80584798D01* +X133583854Y-80548914D01* +X133481888Y-80480781D01* +X133481879Y-80480777D01* +X133308899Y-80409126D01* +X133125268Y-80372600D01* +X133125266Y-80372600D01* +X132938034Y-80372600D01* +X132938031Y-80372600D01* +X132754400Y-80409126D01* +X132581420Y-80480777D01* +X132581411Y-80480781D01* +X132425742Y-80584798D01* +X132425738Y-80584801D01* +X132293351Y-80717188D01* +X132293348Y-80717192D01* +X132189331Y-80872861D01* +X132189327Y-80872870D01* +X132117676Y-81045850D01* +X132081150Y-81229481D01* +X130521230Y-81229481D01* +X135541915Y-76208796D01* +X135596432Y-76181019D01* +X135611919Y-76179800D01* +X165612341Y-76179800D01* +X165670532Y-76198707D01* +X165682338Y-76208790D01* +X165763337Y-76289789D01* +X165763339Y-76289790D01* +X165763341Y-76289792D01* +X165866060Y-76349097D01* +X165866061Y-76349097D01* +X165866064Y-76349099D01* +X165980641Y-76379800D01* +X166099259Y-76379800D01* +X166213836Y-76349099D01* +X166213838Y-76349097D01* +X166213840Y-76349097D01* +X166316558Y-76289792D01* +X166316558Y-76289791D01* +X166316563Y-76289789D01* +X166400439Y-76205913D01* +X166400442Y-76205908D01* +X166459747Y-76103190D01* +X166459747Y-76103188D01* +X166459749Y-76103186D01* +X166490450Y-75988609D01* +X166490450Y-75869991D01* +X166481214Y-75835522D01* +X166484417Y-75774421D01* +X166522922Y-75726871D01* +X166576841Y-75710900D01* +X166586357Y-75710900D01* +X166586359Y-75710900D01* +X166700936Y-75680199D01* +X166700938Y-75680197D01* +X166700940Y-75680197D01* +X166803658Y-75620892D01* +X166803658Y-75620891D01* +X166803663Y-75620889D01* +X166887539Y-75537013D01* +X166901449Y-75512920D01* +X166946847Y-75434290D01* +X166946847Y-75434288D01* +X166946849Y-75434286D01* +X166977550Y-75319709D01* +X166977550Y-75201091D01* +X166946849Y-75086514D01* +X166946847Y-75086511D01* +X166946847Y-75086509D01* +X166887542Y-74983791D01* +X166887540Y-74983789D01* +X166887539Y-74983787D01* +X166803663Y-74899911D01* +X166803660Y-74899909D01* +X166803658Y-74899907D01* +X166700939Y-74840602D01* +X166700940Y-74840602D01* +X166687401Y-74836974D01* +X166586359Y-74809900D01* +X166467741Y-74809900D01* +X166397617Y-74828689D01* +X166353159Y-74840602D01* +X166250441Y-74899907D01* +X166166557Y-74983791D01* +X166107252Y-75086509D01* +X166102673Y-75103599D01* +X166076550Y-75201091D01* +X166076550Y-75319709D01* +X166085786Y-75354177D01* +X166082583Y-75415279D01* +X166044078Y-75462829D01* +X165990159Y-75478800D01* +X165980641Y-75478800D01* +X165910517Y-75497589D01* +X165866059Y-75509502D01* +X165763341Y-75568807D01* +X165763340Y-75568808D01* +X165763337Y-75568810D01* +X165763337Y-75568811D01* +X165682342Y-75649805D01* +X165627828Y-75677581D01* +X165612341Y-75678800D01* +X141769219Y-75678800D01* +X141711028Y-75659893D01* +X141675064Y-75610393D01* +X141675064Y-75549207D01* +X141699215Y-75509797D01* +X142189625Y-75019385D01* +X142244142Y-74991607D01* +X142297512Y-74997923D01* +X142459815Y-75065151D01* +X142653109Y-75103600D01* +X142653110Y-75103600D01* +X142850190Y-75103600D01* +X142850191Y-75103600D01* +X143043485Y-75065151D01* +X143225564Y-74989732D01* +X143389432Y-74880239D01* +X143528789Y-74740882D01* +X143638282Y-74577014D01* +X143713701Y-74394935D01* +X143752150Y-74201641D01* +X143752150Y-74004559D01* +X143752149Y-74004556D01* +X144291150Y-74004556D01* +X144291150Y-74201643D01* +X144329599Y-74394934D01* +X144329599Y-74394936D01* +X144405017Y-74577013D01* +X144422448Y-74603100D01* +X144514511Y-74740882D01* +X144653868Y-74880239D01* +X144817736Y-74989732D01* +X144999815Y-75065151D01* +X145193109Y-75103600D01* +X145193110Y-75103600D01* +X145390190Y-75103600D01* +X145390191Y-75103600D01* +X145583485Y-75065151D01* +X145765564Y-74989732D01* +X145929432Y-74880239D01* +X146068789Y-74740882D01* +X146178282Y-74577014D01* +X146253701Y-74394935D01* +X146292150Y-74201641D01* +X146292150Y-74004559D01* +X146292149Y-74004556D01* +X146831150Y-74004556D01* +X146831150Y-74201643D01* +X146869599Y-74394934D01* +X146869599Y-74394936D01* +X146945017Y-74577013D01* +X146962448Y-74603100D01* +X147054511Y-74740882D01* +X147193868Y-74880239D01* +X147357736Y-74989732D01* +X147539815Y-75065151D01* +X147733109Y-75103600D01* +X147733110Y-75103600D01* +X147930190Y-75103600D01* +X147930191Y-75103600D01* +X148123485Y-75065151D01* +X148305564Y-74989732D01* +X148469432Y-74880239D01* +X148608789Y-74740882D01* +X148718282Y-74577014D01* +X148793701Y-74394935D01* +X148832150Y-74201641D01* +X148832150Y-74004559D01* +X148793701Y-73811265D01* +X148718282Y-73629186D01* +X148608789Y-73465318D01* +X148469432Y-73325961D01* +X148340128Y-73239563D01* +X148305563Y-73216467D01* +X148123485Y-73141049D01* +X147930193Y-73102600D01* +X147930191Y-73102600D01* +X147733109Y-73102600D01* +X147733106Y-73102600D01* +X147539815Y-73141049D01* +X147539813Y-73141049D01* +X147357736Y-73216467D01* +X147193868Y-73325961D01* +X147193864Y-73325964D01* +X147054514Y-73465314D01* +X147054511Y-73465318D01* +X146945017Y-73629186D01* +X146869599Y-73811263D01* +X146869599Y-73811265D01* +X146831150Y-74004556D01* +X146292149Y-74004556D01* +X146253701Y-73811265D01* +X146178282Y-73629186D01* +X146068789Y-73465318D01* +X145929432Y-73325961D01* +X145800128Y-73239563D01* +X145765563Y-73216467D01* +X145583485Y-73141049D01* +X145390193Y-73102600D01* +X145390191Y-73102600D01* +X145193109Y-73102600D01* +X145193106Y-73102600D01* +X144999815Y-73141049D01* +X144999813Y-73141049D01* +X144817736Y-73216467D01* +X144653868Y-73325961D01* +X144653864Y-73325964D01* +X144514514Y-73465314D01* +X144514511Y-73465318D01* +X144405017Y-73629186D01* +X144329599Y-73811263D01* +X144329599Y-73811265D01* +X144291150Y-74004556D01* +X143752149Y-74004556D01* +X143713701Y-73811265D01* +X143638282Y-73629186D01* +X143528789Y-73465318D01* +X143389432Y-73325961D01* +X143260128Y-73239563D01* +X143225563Y-73216467D01* +X143043485Y-73141049D01* +X142850193Y-73102600D01* +X142850191Y-73102600D01* +X142653109Y-73102600D01* +X142653106Y-73102600D01* +X142459815Y-73141049D01* +X142459813Y-73141049D01* +X142277736Y-73216467D01* +X142113868Y-73325961D01* +X142113864Y-73325964D01* +X141974514Y-73465314D01* +X141974511Y-73465318D01* +X141865017Y-73629186D01* +X141789599Y-73811263D01* +X141789599Y-73811265D01* +X141751150Y-74004556D01* +X141751150Y-74201643D01* +X141789599Y-74394934D01* +X141789599Y-74394936D01* +X141856824Y-74557234D01* +X141861624Y-74618231D01* +X141835364Y-74665122D01* +X141294685Y-75205803D01* +X141240168Y-75233581D01* +X141224681Y-75234800D01* +X140591622Y-75234800D01* +X140533431Y-75215893D01* +X140497467Y-75166393D01* +X140497467Y-75105207D01* +X140533431Y-75055707D01* +X140553737Y-75044336D01* +X140685564Y-74989732D01* +X140849432Y-74880239D01* +X140988789Y-74740882D01* +X141098282Y-74577014D01* +X141173701Y-74394935D01* +X141212150Y-74201641D01* +X141212150Y-74004559D01* +X141173701Y-73811265D01* +X141098282Y-73629186D01* +X140988789Y-73465318D01* +X140849432Y-73325961D01* +X140720128Y-73239563D01* +X140685563Y-73216467D01* +X140503485Y-73141049D01* +X140310193Y-73102600D01* +X140310191Y-73102600D01* +X140113109Y-73102600D01* +X140113106Y-73102600D01* +X139919815Y-73141049D01* +X139919813Y-73141049D01* +X139737736Y-73216467D01* +X139573868Y-73325961D01* +X139573864Y-73325964D01* +X139434514Y-73465314D01* +X139434511Y-73465318D01* +X139325017Y-73629186D01* +X139249599Y-73811263D01* +X139249599Y-73811265D01* +X139211150Y-74004556D01* +X139211150Y-74201643D01* +X139249599Y-74394934D01* +X139249599Y-74394936D01* +X139325017Y-74577013D01* +X139342448Y-74603100D01* +X139434511Y-74740882D01* +X139573868Y-74880239D01* +X139737736Y-74989732D01* +X139863452Y-75041805D01* +X139869563Y-75044336D01* +X139916089Y-75084072D01* +X139930373Y-75143567D01* +X139906959Y-75200095D01* +X139854790Y-75232064D01* +X139831678Y-75234800D01* +X138051622Y-75234800D01* +X137993431Y-75215893D01* +X137957467Y-75166393D01* +X137957467Y-75105207D01* +X137993431Y-75055707D01* +X138013737Y-75044336D01* +X138145564Y-74989732D01* +X138309432Y-74880239D01* +X138448789Y-74740882D01* +X138558282Y-74577014D01* +X138633701Y-74394935D01* +X138672150Y-74201641D01* +X138672150Y-74004559D01* +X138633701Y-73811265D01* +X138558282Y-73629186D01* +X138448789Y-73465318D01* +X138309432Y-73325961D01* +X138180128Y-73239563D01* +X138145563Y-73216467D01* +X137963485Y-73141049D01* +X137770193Y-73102600D01* +X137770191Y-73102600D01* +X137573109Y-73102600D01* +X137573106Y-73102600D01* +X137379815Y-73141049D01* +X137379813Y-73141049D01* +X137197736Y-73216467D01* +X137033868Y-73325961D01* +X137033864Y-73325964D01* +X136894514Y-73465314D01* +X136894511Y-73465318D01* +X136785017Y-73629186D01* +X136709599Y-73811263D01* +X136709599Y-73811265D01* +X136671150Y-74004556D01* +X136671150Y-74201643D01* +X136709599Y-74394934D01* +X136709599Y-74394936D01* +X136785017Y-74577013D01* +X136802448Y-74603100D01* +X136894511Y-74740882D01* +X137033868Y-74880239D01* +X137197736Y-74989732D01* +X137323452Y-75041805D01* +X137329563Y-75044336D01* +X137376089Y-75084072D01* +X137390373Y-75143567D01* +X137366959Y-75200095D01* +X137314790Y-75232064D01* +X137291678Y-75234800D01* +X135511622Y-75234800D01* +X135453431Y-75215893D01* +X135417467Y-75166393D01* +X135417467Y-75105207D01* +X135453431Y-75055707D01* +X135473737Y-75044336D01* +X135605564Y-74989732D01* +X135769432Y-74880239D01* +X135908789Y-74740882D01* +X136018282Y-74577014D01* +X136093701Y-74394935D01* +X136132150Y-74201641D01* +X136132150Y-74004559D01* +X136093701Y-73811265D01* +X136018282Y-73629186D01* +X135908789Y-73465318D01* +X135769432Y-73325961D01* +X135640128Y-73239563D01* +X135605563Y-73216467D01* +X135423485Y-73141049D01* +X135230193Y-73102600D01* +X135230191Y-73102600D01* +X135033109Y-73102600D01* +X135033106Y-73102600D01* +X134839815Y-73141049D01* +X134839813Y-73141049D01* +X134657736Y-73216467D01* +X134493868Y-73325961D01* +X134493864Y-73325964D01* +X134354514Y-73465314D01* +X134354511Y-73465318D01* +X134245017Y-73629186D01* +X134169599Y-73811263D01* +X134169599Y-73811265D01* +X134131150Y-74004556D01* +X134131150Y-74201643D01* +X134169599Y-74394934D01* +X134169599Y-74394936D01* +X134245017Y-74577013D01* +X134262448Y-74603100D01* +X134354511Y-74740882D01* +X134493868Y-74880239D01* +X134657736Y-74989732D01* +X134783452Y-75041805D01* +X134789563Y-75044336D01* +X134836089Y-75084072D01* +X134850373Y-75143567D01* +X134826959Y-75200095D01* +X134774790Y-75232064D01* +X134751678Y-75234800D01* +X132971622Y-75234800D01* +X132913431Y-75215893D01* +X132877467Y-75166393D01* +X132877467Y-75105207D01* +X132913431Y-75055707D01* +X132933737Y-75044336D01* +X133065564Y-74989732D01* +X133229432Y-74880239D01* +X133368789Y-74740882D01* +X133478282Y-74577014D01* +X133553701Y-74394935D01* +X133592150Y-74201641D01* +X133592150Y-74004559D01* +X133553701Y-73811265D01* +X133478282Y-73629186D01* +X133368789Y-73465318D01* +X133229432Y-73325961D01* +X133100128Y-73239563D01* +X133065563Y-73216467D01* +X132883485Y-73141049D01* +X132690193Y-73102600D01* +X132690191Y-73102600D01* +X132493109Y-73102600D01* +X132493106Y-73102600D01* +X132299815Y-73141049D01* +X132299813Y-73141049D01* +X132117736Y-73216467D01* +X131953868Y-73325961D01* +X131953864Y-73325964D01* +X131814514Y-73465314D01* +X131814511Y-73465318D01* +X131705017Y-73629186D01* +X131629599Y-73811263D01* +X131629599Y-73811265D01* +X131591150Y-74004556D01* +X131591150Y-74201643D01* +X131629599Y-74394934D01* +X131629599Y-74394936D01* +X131705017Y-74577013D01* +X131722448Y-74603100D01* +X131814511Y-74740882D01* +X131953868Y-74880239D01* +X132117736Y-74989732D01* +X132243452Y-75041805D01* +X132249563Y-75044336D01* +X132296089Y-75084072D01* +X132310373Y-75143567D01* +X132286959Y-75200095D01* +X132234790Y-75232064D01* +X132211678Y-75234800D01* +X130431622Y-75234800D01* +X130373431Y-75215893D01* +X130337467Y-75166393D01* +X130337467Y-75105207D01* +X130373431Y-75055707D01* +X130393737Y-75044336D01* +X130525564Y-74989732D01* +X130689432Y-74880239D01* +X130828789Y-74740882D01* +X130938282Y-74577014D01* +X131013701Y-74394935D01* +X131052150Y-74201641D01* +X131052150Y-74004559D01* +X131013701Y-73811265D01* +X130938282Y-73629186D01* +X130828789Y-73465318D01* +X130689432Y-73325961D01* +X130560128Y-73239563D01* +X130525563Y-73216467D01* +X130343485Y-73141049D01* +X130150193Y-73102600D01* +X130150191Y-73102600D01* +X129953109Y-73102600D01* +X129953106Y-73102600D01* +X129759815Y-73141049D01* +X129759813Y-73141049D01* +X129577736Y-73216467D01* +X129413868Y-73325961D01* +X129413864Y-73325964D01* +X129274514Y-73465314D01* +X129274511Y-73465318D01* +X129165017Y-73629186D01* +X129089599Y-73811263D01* +X129089599Y-73811265D01* +X129051150Y-74004556D01* +X129051150Y-74201643D01* +X129089599Y-74394934D01* +X129089599Y-74394936D01* +X129165017Y-74577013D01* +X129182448Y-74603100D01* +X129274511Y-74740882D01* +X129413868Y-74880239D01* +X129577736Y-74989732D01* +X129703452Y-75041805D01* +X129709563Y-75044336D01* +X129756089Y-75084072D01* +X129770373Y-75143567D01* +X129746959Y-75200095D01* +X129694790Y-75232064D01* +X129671678Y-75234800D01* +X127940477Y-75234800D01* +X127840822Y-75234800D01* +X127748753Y-75272936D01* +X127744402Y-75277286D01* +X127744401Y-75277287D01* +X127590784Y-75430904D01* +X127536268Y-75458681D01* +X127520781Y-75459900D01* +X116588119Y-75459900D01* +X116529928Y-75440993D01* +X116493964Y-75391493D01* +X116493964Y-75330307D01* +X116518115Y-75290897D01* +X116789625Y-75019385D01* +X116844142Y-74991607D01* +X116897512Y-74997923D01* +X117059815Y-75065151D01* +X117253109Y-75103600D01* +X117253110Y-75103600D01* +X117450190Y-75103600D01* +X117450191Y-75103600D01* +X117643485Y-75065151D01* +X117825564Y-74989732D01* +X117989432Y-74880239D01* +X118128789Y-74740882D01* +X118238282Y-74577014D01* +X118313701Y-74394935D01* +X118352150Y-74201641D01* +X118352150Y-74004559D01* +X118313701Y-73811265D01* +X118238282Y-73629186D01* +X118128789Y-73465318D01* +X118034375Y-73370904D01* +X118006598Y-73316387D01* +X118016169Y-73255955D01* +X118059434Y-73212690D01* +X118104379Y-73201900D01* +X119119079Y-73201900D01* +X119122110Y-73201297D01* +X119127206Y-73201900D01* +X119128829Y-73201900D01* +X119128829Y-73202092D01* +X119182871Y-73208487D01* +X119227802Y-73250019D01* +X119239740Y-73310028D01* +X119214125Y-73365594D01* +X119211430Y-73368397D01* +X119114519Y-73465308D01* +X119114511Y-73465318D01* +X119005017Y-73629186D01* +X118929599Y-73811263D01* +X118929599Y-73811265D01* +X118891150Y-74004556D01* +X118891150Y-74201643D01* +X118929599Y-74394934D01* +X118929599Y-74394936D01* +X119005017Y-74577013D01* +X119022448Y-74603100D01* +X119114511Y-74740882D01* +X119253868Y-74880239D01* +X119417736Y-74989732D01* +X119599815Y-75065151D01* +X119793109Y-75103600D01* +X119793110Y-75103600D01* +X119990190Y-75103600D01* +X119990191Y-75103600D01* +X120183485Y-75065151D01* +X120365564Y-74989732D01* +X120529432Y-74880239D01* +X120668789Y-74740882D01* +X120778282Y-74577014D01* +X120853701Y-74394935D01* +X120892150Y-74201641D01* +X120892150Y-74004559D01* +X120892149Y-74004556D01* +X121431150Y-74004556D01* +X121431150Y-74201643D01* +X121469599Y-74394934D01* +X121469599Y-74394936D01* +X121545017Y-74577013D01* +X121562448Y-74603100D01* +X121654511Y-74740882D01* +X121793868Y-74880239D01* +X121957736Y-74989732D01* +X122139815Y-75065151D01* +X122333109Y-75103600D01* +X122333110Y-75103600D01* +X122530190Y-75103600D01* +X122530191Y-75103600D01* +X122723485Y-75065151D01* +X122905564Y-74989732D01* +X123069432Y-74880239D01* +X123208789Y-74740882D01* +X123318282Y-74577014D01* +X123393701Y-74394935D01* +X123432150Y-74201641D01* +X123432150Y-74004559D01* +X123432149Y-74004556D01* +X123971150Y-74004556D01* +X123971150Y-74201643D01* +X124009599Y-74394934D01* +X124009599Y-74394936D01* +X124085017Y-74577013D01* +X124102448Y-74603100D01* +X124194511Y-74740882D01* +X124333868Y-74880239D01* +X124497736Y-74989732D01* +X124679815Y-75065151D01* +X124873109Y-75103600D01* +X124873110Y-75103600D01* +X125070190Y-75103600D01* +X125070191Y-75103600D01* +X125263485Y-75065151D01* +X125445564Y-74989732D01* +X125609432Y-74880239D01* +X125748789Y-74740882D01* +X125858282Y-74577014D01* +X125933701Y-74394935D01* +X125972150Y-74201641D01* +X125972150Y-74004559D01* +X125972149Y-74004556D01* +X126511150Y-74004556D01* +X126511150Y-74201643D01* +X126549599Y-74394934D01* +X126549599Y-74394936D01* +X126625017Y-74577013D01* +X126642448Y-74603100D01* +X126734511Y-74740882D01* +X126873868Y-74880239D01* +X127037736Y-74989732D01* +X127219815Y-75065151D01* +X127413109Y-75103600D01* +X127413110Y-75103600D01* +X127610190Y-75103600D01* +X127610191Y-75103600D01* +X127803485Y-75065151D01* +X127985564Y-74989732D01* +X128149432Y-74880239D01* +X128288789Y-74740882D01* +X128398282Y-74577014D01* +X128473701Y-74394935D01* +X128512150Y-74201641D01* +X128512150Y-74004559D01* +X128473701Y-73811265D01* +X128398282Y-73629186D01* +X128288789Y-73465318D01* +X128149432Y-73325961D01* +X128020128Y-73239563D01* +X127985563Y-73216467D01* +X127803485Y-73141049D01* +X127610193Y-73102600D01* +X127610191Y-73102600D01* +X127413109Y-73102600D01* +X127413106Y-73102600D01* +X127219815Y-73141049D01* +X127219813Y-73141049D01* +X127037736Y-73216467D01* +X126873868Y-73325961D01* +X126873864Y-73325964D01* +X126734514Y-73465314D01* +X126734511Y-73465318D01* +X126625017Y-73629186D01* +X126549599Y-73811263D01* +X126549599Y-73811265D01* +X126511150Y-74004556D01* +X125972149Y-74004556D01* +X125933701Y-73811265D01* +X125858282Y-73629186D01* +X125748789Y-73465318D01* +X125609432Y-73325961D01* +X125480128Y-73239563D01* +X125445563Y-73216467D01* +X125263485Y-73141049D01* +X125070193Y-73102600D01* +X125070191Y-73102600D01* +X124873109Y-73102600D01* +X124873106Y-73102600D01* +X124679815Y-73141049D01* +X124679813Y-73141049D01* +X124497736Y-73216467D01* +X124333868Y-73325961D01* +X124333864Y-73325964D01* +X124194514Y-73465314D01* +X124194511Y-73465318D01* +X124085017Y-73629186D01* +X124009599Y-73811263D01* +X124009599Y-73811265D01* +X123971150Y-74004556D01* +X123432149Y-74004556D01* +X123393701Y-73811265D01* +X123318282Y-73629186D01* +X123208789Y-73465318D01* +X123069432Y-73325961D01* +X122940128Y-73239563D01* +X122905563Y-73216467D01* +X122723485Y-73141049D01* +X122530193Y-73102600D01* +X122530191Y-73102600D01* +X122333109Y-73102600D01* +X122333106Y-73102600D01* +X122139815Y-73141049D01* +X122139813Y-73141049D01* +X121957736Y-73216467D01* +X121793868Y-73325961D01* +X121793864Y-73325964D01* +X121654514Y-73465314D01* +X121654511Y-73465318D01* +X121545017Y-73629186D01* +X121469599Y-73811263D01* +X121469599Y-73811265D01* +X121431150Y-74004556D01* +X120892149Y-74004556D01* +X120853701Y-73811265D01* +X120786473Y-73648963D01* +X120781673Y-73587968D01* +X120807935Y-73541075D01* +X121502716Y-72846296D01* +X121557232Y-72818519D01* +X121572719Y-72817300D01* +X152079954Y-72817300D01* +X152138145Y-72836207D01* +X152174109Y-72885707D01* +X152174109Y-72946893D01* +X152150608Y-72979239D01* +X152149932Y-72987828D01* +X152782241Y-73620137D01* +X152718657Y-73637175D01* +X152604643Y-73703001D01* +X152511551Y-73796093D01* +X152445725Y-73910107D01* +X152428687Y-73973691D01* +X151796378Y-73341382D01* +X151757028Y-73395542D01* +X151757026Y-73395546D01* +X151660554Y-73584884D01* +X151594890Y-73786978D01* +X151563692Y-73983956D01* +X151535914Y-74038473D01* +X151481398Y-74066250D01* +X151420966Y-74056679D01* +X151377701Y-74013414D01* +X151368813Y-73987783D01* +X151368052Y-73983956D01* +X151333701Y-73811265D01* +X151258282Y-73629186D01* +X151148789Y-73465318D01* +X151009432Y-73325961D01* +X150880128Y-73239563D01* +X150845563Y-73216467D01* +X150663485Y-73141049D01* +X150470193Y-73102600D01* +X150470191Y-73102600D01* +X150273109Y-73102600D01* +X150273106Y-73102600D01* +X150079815Y-73141049D01* +X150079813Y-73141049D01* +X149897736Y-73216467D01* +X149733868Y-73325961D01* +X149733864Y-73325964D01* +X149594514Y-73465314D01* +X149594511Y-73465318D01* +X149485017Y-73629186D01* +X149409599Y-73811263D01* +X149409599Y-73811265D01* +X149371150Y-74004556D01* +X149371150Y-74201643D01* +X149409599Y-74394934D01* +X149409599Y-74394936D01* +X149485017Y-74577013D01* +X149502448Y-74603100D01* +X149594511Y-74740882D01* +X149733868Y-74880239D01* +X149897736Y-74989732D01* +X150079815Y-75065151D01* +X150273109Y-75103600D01* +X150273110Y-75103600D01* +X150470190Y-75103600D01* +X150470191Y-75103600D01* +X150663485Y-75065151D01* +X150845564Y-74989732D01* +X151009432Y-74880239D01* +X151148789Y-74740882D01* +X151258282Y-74577014D01* +X151333701Y-74394935D01* +X151368813Y-74218415D01* +X151398710Y-74165032D01* +X151454275Y-74139416D01* +X151514285Y-74151353D01* +X151555817Y-74196283D01* +X151563692Y-74222243D01* +X151594890Y-74419221D01* +X151660554Y-74621315D01* +X151757026Y-74810653D01* +X151757030Y-74810659D01* +X151796378Y-74864816D01* +X151796379Y-74864816D01* +X152428687Y-74232507D01* +X152445725Y-74296093D01* +X152511551Y-74410107D01* +X152604643Y-74503199D01* +X152718657Y-74569025D01* +X152782239Y-74586062D01* +X152149932Y-75218369D01* +X152149932Y-75218370D01* +X152204090Y-75257719D01* +X152204096Y-75257723D01* +X152393434Y-75354195D01* +X152595528Y-75419859D01* +X152805400Y-75453100D01* +X153017900Y-75453100D01* +X153227771Y-75419859D01* +X153429865Y-75354195D01* +X153619206Y-75257720D01* +X153673366Y-75218370D01* +X153041058Y-74586062D01* +X153104643Y-74569025D01* +X153218657Y-74503199D01* +X153311749Y-74410107D01* +X153377575Y-74296093D01* +X153394612Y-74232508D01* +X154026920Y-74864816D01* +X154066270Y-74810656D01* +X154162745Y-74621315D01* +X154228409Y-74419221D01* +X154259607Y-74222243D01* +X154287384Y-74167727D01* +X154341901Y-74139949D01* +X154402333Y-74149520D01* +X154445598Y-74192785D01* +X154454486Y-74218415D01* +X154489599Y-74394936D01* +X154565017Y-74577013D01* +X154582448Y-74603100D01* +X154674511Y-74740882D01* +X154813868Y-74880239D01* +X154977736Y-74989732D01* +X155159815Y-75065151D01* +X155353109Y-75103600D01* +X155353110Y-75103600D01* +X155550190Y-75103600D01* +X155550191Y-75103600D01* +X155743485Y-75065151D01* +X155925564Y-74989732D01* +X156089432Y-74880239D01* +X156228789Y-74740882D01* +X156338282Y-74577014D01* +X156413701Y-74394935D01* +X156452150Y-74201641D01* +X156452150Y-74133272D01* +X173366150Y-74133272D01* +X173366150Y-75512927D01* +X173374882Y-75556820D01* +X173374884Y-75556824D01* +X173407388Y-75605470D01* +X173408146Y-75606604D01* +X173457928Y-75639867D01* +X173468977Y-75642064D01* +X173501822Y-75648599D01* +X173501828Y-75648599D01* +X173501830Y-75648600D01* +X173501831Y-75648600D01* +X174881469Y-75648600D01* +X174881470Y-75648600D01* +X174881471Y-75648599D01* +X174881477Y-75648599D01* +X174903273Y-75644262D01* +X174925372Y-75639867D01* +X174975154Y-75606604D01* +X175008417Y-75556822D01* +X175010585Y-75545924D01* +X195366649Y-75545924D01* +X195373051Y-75605470D01* +X195373053Y-75605481D01* +X195423296Y-75740188D01* +X195423297Y-75740190D01* +X195509457Y-75855284D01* +X195509465Y-75855292D01* +X195624559Y-75941452D01* +X195624561Y-75941453D01* +X195759268Y-75991696D01* +X195759279Y-75991698D01* +X195818826Y-75998100D01* +X195964129Y-75998100D01* +X196022320Y-76017007D01* +X196058284Y-76066507D01* +X196058284Y-76127693D01* +X196022320Y-76177193D01* +X196019133Y-76179414D01* +X196015428Y-76181889D01* +X195900439Y-76296878D01* +X195810100Y-76432081D01* +X195747874Y-76582309D01* +X195716150Y-76741794D01* +X195716150Y-76904405D01* +X195747874Y-77063890D01* +X195810100Y-77214118D01* +X195810101Y-77214120D01* +X195810102Y-77214121D01* +X195900442Y-77349325D01* +X196015425Y-77464308D01* +X196150629Y-77554648D01* +X196150630Y-77554648D01* +X196150631Y-77554649D01* +X196225745Y-77585762D01* +X196300861Y-77616876D01* +X196460345Y-77648600D01* +X196460346Y-77648600D01* +X196622954Y-77648600D01* +X196622955Y-77648600D01* +X196782439Y-77616876D01* +X196932671Y-77554648D01* +X197067875Y-77464308D01* +X197182858Y-77349325D01* +X197200382Y-77323099D01* +X208689418Y-77323099D01* +X208689419Y-77323100D01* +X209733638Y-77323100D01* +X209700725Y-77380107D01* +X209666650Y-77507274D01* +X209666650Y-77638926D01* +X209700725Y-77766093D01* +X209733638Y-77823100D01* +X208689419Y-77823100D01* +X208699891Y-77889222D01* +X208765554Y-78091315D01* +X208862025Y-78280652D01* +X208986927Y-78452564D01* +X209137185Y-78602822D01* +X209309097Y-78727724D01* +X209498436Y-78824196D01* +X209668478Y-78879445D01* +X209717978Y-78915409D01* +X209736886Y-78973599D01* +X209717979Y-79031790D01* +X209668479Y-79067754D01* +X209637886Y-79072600D01* +X209385128Y-79072600D01* +X209385126Y-79072601D01* +X209291350Y-79087452D01* +X209291345Y-79087454D01* +X209178309Y-79145049D01* +X209088599Y-79234759D01* +X209031004Y-79347795D01* +X209016150Y-79441578D01* +X209016150Y-80704621D01* +X209016151Y-80704623D01* +X209031002Y-80798399D01* +X209031004Y-80798404D01* +X209088600Y-80911442D01* +X209178308Y-81001150D01* +X209291346Y-81058746D01* +X209385131Y-81073600D01* +X210948168Y-81073599D01* +X210948171Y-81073599D01* +X210948172Y-81073598D01* +X210995061Y-81066172D01* +X211041949Y-81058747D01* +X211041949Y-81058746D01* +X211041954Y-81058746D01* +X211154992Y-81001150D01* +X211244700Y-80911442D01* +X211302296Y-80798404D01* +X211317150Y-80704619D01* +X211317149Y-79441582D01* +X211317149Y-79441581D01* +X211317149Y-79441578D01* +X211317148Y-79441576D01* +X211302297Y-79347800D01* +X211302296Y-79347798D01* +X211302296Y-79347796D01* +X211244700Y-79234758D01* +X211154992Y-79145050D01* +X211041954Y-79087454D01* +X211041955Y-79087454D01* +X210948172Y-79072600D01* +X210695416Y-79072600D01* +X210637225Y-79053693D01* +X210601261Y-79004193D01* +X210601261Y-78943007D01* +X210637225Y-78893507D01* +X210664824Y-78879445D01* +X210834863Y-78824196D01* +X211024202Y-78727724D01* +X211196114Y-78602822D01* +X211346372Y-78452564D01* +X211471274Y-78280652D01* +X211567745Y-78091315D01* +X211633408Y-77889222D01* +X211643881Y-77823100D01* +X210599662Y-77823100D01* +X210632575Y-77766093D01* +X210666650Y-77638926D01* +X210666650Y-77507274D01* +X210632575Y-77380107D01* +X210599662Y-77323100D01* +X211643881Y-77323100D01* +X211643881Y-77323099D01* +X211633408Y-77256977D01* +X211567745Y-77054884D01* +X211471274Y-76865547D01* +X211346372Y-76693635D01* +X211196114Y-76543377D01* +X211024202Y-76418475D01* +X210834865Y-76322004D01* +X210632771Y-76256340D01* +X210422900Y-76223100D01* +X210416651Y-76223100D01* +X210416650Y-76223101D01* +X210416650Y-77140088D01* +X210359643Y-77107175D01* +X210232476Y-77073100D01* +X210100824Y-77073100D01* +X209973657Y-77107175D01* +X209916650Y-77140088D01* +X209916650Y-76223101D01* +X209916649Y-76223100D01* +X209910400Y-76223100D01* +X209700528Y-76256340D01* +X209498434Y-76322004D01* +X209309097Y-76418475D01* +X209137185Y-76543377D01* +X208986927Y-76693635D01* +X208862025Y-76865547D01* +X208765554Y-77054884D01* +X208699891Y-77256977D01* +X208689418Y-77323099D01* +X197200382Y-77323099D01* +X197273198Y-77214121D01* +X197335426Y-77063889D01* +X197367150Y-76904405D01* +X197367150Y-76741795D01* +X197335426Y-76582311D01* +X197273198Y-76432079D01* +X197182858Y-76296875D01* +X197067875Y-76181892D01* +X197067871Y-76181889D01* +X197064167Y-76179414D01* +X197026289Y-76131363D01* +X197023889Y-76070225D01* +X197057883Y-76019352D01* +X197115287Y-75998176D01* +X197119171Y-75998100D01* +X197264474Y-75998100D01* +X197324020Y-75991698D01* +X197324031Y-75991696D01* +X197458738Y-75941453D01* +X197458740Y-75941452D01* +X197573834Y-75855292D01* +X197573842Y-75855284D01* +X197660002Y-75740190D01* +X197660003Y-75740188D01* +X197710246Y-75605481D01* +X197710248Y-75605470D01* +X197716650Y-75545924D01* +X197716650Y-75073101D01* +X197716649Y-75073100D01* +X196857336Y-75073100D01* +X196861730Y-75068706D01* +X196914391Y-74977494D01* +X196941650Y-74875761D01* +X196941650Y-74770439D01* +X196914391Y-74668706D01* +X196861730Y-74577494D01* +X196857336Y-74573100D01* +X197716649Y-74573100D01* +X197716650Y-74573099D01* +X197716650Y-74100275D01* +X197710248Y-74040729D01* +X197710246Y-74040718D01* +X197660003Y-73906011D01* +X197660002Y-73906009D01* +X197573842Y-73790915D01* +X197573834Y-73790907D01* +X197458740Y-73704747D01* +X197458738Y-73704746D01* +X197324031Y-73654503D01* +X197324020Y-73654501D01* +X197264474Y-73648100D01* +X196791651Y-73648100D01* +X196791650Y-73648101D01* +X196791650Y-74507414D01* +X196787256Y-74503020D01* +X196696044Y-74450359D01* +X196594311Y-74423100D01* +X196488989Y-74423100D01* +X196387256Y-74450359D01* +X196296044Y-74503020D01* +X196291650Y-74507414D01* +X196291650Y-73648101D01* +X196291649Y-73648100D01* +X195818826Y-73648100D01* +X195759279Y-73654501D01* +X195759268Y-73654503D01* +X195624561Y-73704746D01* +X195624559Y-73704747D01* +X195509465Y-73790907D01* +X195509457Y-73790915D01* +X195423297Y-73906009D01* +X195423296Y-73906011D01* +X195373053Y-74040718D01* +X195373051Y-74040729D01* +X195366650Y-74100275D01* +X195366650Y-74573099D01* +X195366651Y-74573100D01* +X196225964Y-74573100D01* +X196221570Y-74577494D01* +X196168909Y-74668706D01* +X196141650Y-74770439D01* +X196141650Y-74875761D01* +X196168909Y-74977494D01* +X196221570Y-75068706D01* +X196225964Y-75073100D01* +X195366651Y-75073100D01* +X195366650Y-75073101D01* +X195366650Y-75545924D01* +X195366649Y-75545924D01* +X175010585Y-75545924D01* +X175017150Y-75512920D01* +X175017150Y-74133280D01* +X175013899Y-74116935D01* +X175013899Y-74116933D01* +X175008417Y-74089379D01* +X175008415Y-74089375D01* +X175007973Y-74088714D01* +X174975154Y-74039596D01* +X174935970Y-74013414D01* +X174925374Y-74006334D01* +X174925370Y-74006332D01* +X174881477Y-73997600D01* +X174881470Y-73997600D01* +X173501830Y-73997600D01* +X173501822Y-73997600D01* +X173457929Y-74006332D01* +X173457925Y-74006334D01* +X173408148Y-74039594D01* +X173408144Y-74039598D01* +X173374884Y-74089375D01* +X173374882Y-74089379D01* +X173366150Y-74133272D01* +X156452150Y-74133272D01* +X156452150Y-74004559D01* +X156413701Y-73811265D01* +X156338282Y-73629186D01* +X156228789Y-73465318D01* +X156089432Y-73325961D01* +X155960128Y-73239563D01* +X155925563Y-73216467D01* +X155743485Y-73141049D01* +X155550193Y-73102600D01* +X155550191Y-73102600D01* +X155353109Y-73102600D01* +X155353106Y-73102600D01* +X155159815Y-73141049D01* +X155159813Y-73141049D01* +X154977736Y-73216467D01* +X154813868Y-73325961D01* +X154813864Y-73325964D01* +X154674514Y-73465314D01* +X154674511Y-73465318D01* +X154565017Y-73629186D01* +X154489599Y-73811263D01* +X154454486Y-73987784D01* +X154424589Y-74041167D01* +X154369023Y-74066783D01* +X154309014Y-74054846D01* +X154267481Y-74009916D01* +X154259607Y-73983956D01* +X154228409Y-73786978D01* +X154162745Y-73584884D01* +X154066273Y-73395546D01* +X154066269Y-73395540D01* +X154026920Y-73341382D01* +X154026919Y-73341382D01* +X153394612Y-73973689D01* +X153377575Y-73910107D01* +X153311749Y-73796093D01* +X153218657Y-73703001D01* +X153104643Y-73637175D01* +X153041057Y-73620137D01* +X153673366Y-72987829D01* +X153672690Y-72979240D01* +X153649189Y-72946893D01* +X153649189Y-72885708D01* +X153685153Y-72836207D01* +X153743344Y-72817300D01* +X170653179Y-72817300D01* +X170711235Y-72793251D01* +X170745247Y-72779164D01* +X173332833Y-70191578D01* +X209016150Y-70191578D01* +X209016150Y-71454621D01* +X209016151Y-71454623D01* +X209031002Y-71548399D01* +X209031004Y-71548404D01* +X209088600Y-71661442D01* +X209178308Y-71751150D01* +X209291346Y-71808746D01* +X209385131Y-71823600D01* +X210948168Y-71823599D01* +X210948171Y-71823599D01* +X210948172Y-71823598D01* +X210995061Y-71816172D01* +X211041949Y-71808747D01* +X211041949Y-71808746D01* +X211041954Y-71808746D01* +X211154992Y-71751150D01* +X211244700Y-71661442D01* +X211302296Y-71548404D01* +X211317150Y-71454619D01* +X211317149Y-70191582D01* +X211317149Y-70191581D01* +X211317149Y-70191578D01* +X211317148Y-70191576D01* +X211302297Y-70097800D01* +X211302296Y-70097798D01* +X211302296Y-70097796D01* +X211244700Y-69984758D01* +X211154992Y-69895050D01* +X211041954Y-69837454D01* +X211041955Y-69837454D01* +X210948171Y-69822600D01* +X209385128Y-69822600D01* +X209385126Y-69822601D01* +X209291350Y-69837452D01* +X209291345Y-69837454D01* +X209178309Y-69895049D01* +X209088599Y-69984759D01* +X209031004Y-70097795D01* +X209016150Y-70191578D01* +X173332833Y-70191578D01* +X175299855Y-68224556D01* +X209016150Y-68224556D01* +X209016150Y-68421643D01* +X209054599Y-68614934D01* +X209054599Y-68614936D01* +X209130017Y-68797013D01* +X209164273Y-68848281D01* +X209239511Y-68960882D01* +X209378868Y-69100239D01* +X209542736Y-69209732D01* +X209724815Y-69285151D01* +X209918109Y-69323600D01* +X209918110Y-69323600D01* +X210415190Y-69323600D01* +X210415191Y-69323600D01* +X210608485Y-69285151D01* +X210790564Y-69209732D01* +X210954432Y-69100239D01* +X211093789Y-68960882D01* +X211203282Y-68797014D01* +X211278701Y-68614935D01* +X211317150Y-68421641D01* +X211317150Y-68224559D01* +X211278701Y-68031265D01* +X211203282Y-67849186D01* +X211093789Y-67685318D01* +X210954432Y-67545961D01* +X210811415Y-67450400D01* +X210790563Y-67436467D01* +X210608485Y-67361049D01* +X210415193Y-67322600D01* +X210415191Y-67322600D01* +X209918109Y-67322600D01* +X209918106Y-67322600D01* +X209724815Y-67361049D01* +X209724813Y-67361049D01* +X209542736Y-67436467D01* +X209378868Y-67545961D01* +X209378864Y-67545964D01* +X209239514Y-67685314D01* +X209239511Y-67685318D01* +X209130017Y-67849186D01* +X209054599Y-68031263D01* +X209054599Y-68031265D01* +X209016150Y-68224556D01* +X175299855Y-68224556D01* +X177589361Y-65935050D01* +X188133650Y-65935050D01* +X188133650Y-66116149D01* +X188161978Y-66295006D01* +X188161979Y-66295009D01* +X188217939Y-66467239D01* +X188300154Y-66628594D01* +X188406597Y-66775101D01* +X188534649Y-66903153D01* +X188681156Y-67009596D01* +X188842511Y-67091811D01* +X189014741Y-67147771D01* +X189086286Y-67159102D01* +X189193601Y-67176100D01* +X189193604Y-67176100D01* +X189374699Y-67176100D01* +X189464127Y-67161935D01* +X189553559Y-67147771D01* +X189725789Y-67091811D01* +X189887144Y-67009596D01* +X190033651Y-66903153D01* +X190161703Y-66775101D01* +X190268146Y-66628594D01* +X190350361Y-66467239D01* +X190406321Y-66295009D01* +X190434650Y-66116146D01* +X190434650Y-65935054D01* +X190434650Y-65935050D01* +X193213650Y-65935050D01* +X193213650Y-66116149D01* +X193241978Y-66295006D01* +X193241979Y-66295009D01* +X193297939Y-66467239D01* +X193380154Y-66628594D01* +X193486597Y-66775101D01* +X193614649Y-66903153D01* +X193761156Y-67009596D01* +X193922511Y-67091811D01* +X194094741Y-67147771D01* +X194166286Y-67159102D01* +X194273601Y-67176100D01* +X194273604Y-67176100D01* +X194454699Y-67176100D01* +X194544127Y-67161935D01* +X194633559Y-67147771D01* +X194805789Y-67091811D01* +X194967144Y-67009596D01* +X195113651Y-66903153D01* +X195241703Y-66775101D01* +X195348146Y-66628594D01* +X195430361Y-66467239D01* +X195486321Y-66295009D01* +X195514650Y-66116146D01* +X195514650Y-65935054D01* +X195514650Y-65935050D01* +X195488728Y-65771390D01* +X195486321Y-65756191D01* +X195430361Y-65583961D01* +X195348146Y-65422606D01* +X195241703Y-65276099D01* +X195113651Y-65148047D01* +X194967144Y-65041604D01* +X194967143Y-65041603D01* +X194967141Y-65041602D01* +X194805787Y-64959388D01* +X194633556Y-64903428D01* +X194454699Y-64875100D01* +X194454696Y-64875100D01* +X194273604Y-64875100D01* +X194273601Y-64875100D01* +X194094743Y-64903428D01* +X193922512Y-64959388D01* +X193761158Y-65041602D01* +X193687902Y-65094825D01* +X193614649Y-65148047D01* +X193486597Y-65276099D01* +X193433375Y-65349352D01* +X193380152Y-65422608D01* +X193297938Y-65583962D01* +X193241978Y-65756193D01* +X193213650Y-65935050D01* +X190434650Y-65935050D01* +X190408728Y-65771390D01* +X190406321Y-65756191D01* +X190350361Y-65583961D01* +X190268146Y-65422606D01* +X190161703Y-65276099D01* +X190033651Y-65148047D01* +X189887144Y-65041604D01* +X189887143Y-65041603D01* +X189887141Y-65041602D01* +X189725787Y-64959388D01* +X189553556Y-64903428D01* +X189374699Y-64875100D01* +X189374696Y-64875100D01* +X189193604Y-64875100D01* +X189193601Y-64875100D01* +X189014743Y-64903428D01* +X188842512Y-64959388D01* +X188681158Y-65041602D01* +X188607902Y-65094825D01* +X188534649Y-65148047D01* +X188406597Y-65276099D01* +X188353375Y-65349352D01* +X188300152Y-65422608D01* +X188217938Y-65583962D01* +X188161978Y-65756193D01* +X188133650Y-65935050D01* +X177589361Y-65935050D01* +X181600315Y-61924096D01* +X181654832Y-61896319D01* +X181670319Y-61895100D01* +X188634979Y-61895100D01* +X188693035Y-61871051D01* +X188727047Y-61856964D01* +X192268960Y-58315050D01* +X193213650Y-58315050D01* +X193213650Y-58496149D01* +X193241978Y-58675006D01* +X193297938Y-58847237D01* +X193365398Y-58979635D01* +X193380154Y-59008594D01* +X193486597Y-59155101D01* +X193614649Y-59283153D01* +X193761156Y-59389596D01* +X193922511Y-59471811D01* +X194094741Y-59527771D01* +X194166286Y-59539102D01* +X194273601Y-59556100D01* +X194273604Y-59556100D01* +X194454699Y-59556100D01* +X194544127Y-59541935D01* +X194633559Y-59527771D01* +X194805789Y-59471811D01* +X194967144Y-59389596D01* +X195113651Y-59283153D01* +X195241703Y-59155101D01* +X195348146Y-59008594D01* +X195430361Y-58847239D01* +X195486321Y-58675009D01* +X195514650Y-58496146D01* +X195514650Y-58315054D01* +X195514650Y-58315050D01* +X195486321Y-58136193D01* +X195486321Y-58136191D01* +X195430361Y-57963961D01* +X195348146Y-57802606D01* +X195241703Y-57656099D01* +X195113651Y-57528047D01* +X194967144Y-57421604D01* +X194967143Y-57421603D01* +X194967141Y-57421602D01* +X194805787Y-57339388D01* +X194633556Y-57283428D01* +X194454699Y-57255100D01* +X194454696Y-57255100D01* +X194273604Y-57255100D01* +X194273601Y-57255100D01* +X194094743Y-57283428D01* +X193922512Y-57339388D01* +X193761158Y-57421602D01* +X193738079Y-57438370D01* +X193614649Y-57528047D01* +X193486597Y-57656099D01* +X193433375Y-57729352D01* +X193380152Y-57802608D01* +X193297938Y-57963962D01* +X193241978Y-58136193D01* +X193213650Y-58315050D01* +X192268960Y-58315050D01* +X193692581Y-56891428D01* +X193747096Y-56863653D01* +X193807528Y-56873224D01* +X193922511Y-56931811D01* +X194094741Y-56987771D01* +X194132138Y-56993694D01* +X194273601Y-57016100D01* +X194273604Y-57016100D01* +X194454699Y-57016100D01* +X194544127Y-57001935D01* +X194633559Y-56987771D01* +X194805789Y-56931811D01* +X194967144Y-56849596D01* +X195113651Y-56743153D01* +X195241703Y-56615101D01* +X195348146Y-56468594D01* +X195430361Y-56307239D01* +X195486321Y-56135009D01* +X195502753Y-56031263D01* +X195514650Y-55956149D01* +X195514650Y-55775050D01* +X195493134Y-55639208D01* +X195486321Y-55596191D01* +X195430361Y-55423961D01* +X195348146Y-55262606D01* +X195241703Y-55116099D01* +X195113651Y-54988047D01* +X194967144Y-54881604D01* +X194967143Y-54881603D01* +X194967141Y-54881602D01* +X194805787Y-54799388D01* +X194633556Y-54743428D01* +X194454699Y-54715100D01* +X194454696Y-54715100D01* +X194273604Y-54715100D01* +X194273601Y-54715100D01* +X194094743Y-54743428D01* +X193922512Y-54799388D01* +X193761158Y-54881602D01* +X193687902Y-54934825D01* +X193614649Y-54988047D01* +X193486597Y-55116099D01* +X193481516Y-55123093D01* +X193380152Y-55262608D01* +X193297938Y-55423962D01* +X193241978Y-55596193D01* +X193213650Y-55775050D01* +X193213650Y-55956149D01* +X193241978Y-56135006D01* +X193297939Y-56307240D01* +X193356524Y-56422218D01* +X193366096Y-56482651D01* +X193338319Y-56537167D01* +X193338319Y-56537168D01* +X188510385Y-61365104D01* +X188455868Y-61392881D01* +X188440381Y-61394100D01* +X182134922Y-61394100D01* +X182076731Y-61375193D01* +X182040767Y-61325693D01* +X182040767Y-61264507D01* +X182051503Y-61244099D01* +X182050695Y-61243633D01* +X182113247Y-61135290D01* +X182113247Y-61135288D01* +X182113249Y-61135286D01* +X182143950Y-61020709D01* +X182143950Y-60902091D01* +X182113249Y-60787514D01* +X182113247Y-60787511D01* +X182113247Y-60787509D01* +X182053942Y-60684791D01* +X182053940Y-60684789D01* +X182053939Y-60684787D01* +X181970063Y-60600911D01* +X181970060Y-60600909D01* +X181970058Y-60600907D01* +X181867339Y-60541602D01* +X181867340Y-60541602D01* +X181853801Y-60537974D01* +X181752759Y-60510900D01* +X181634141Y-60510900D01* +X181577034Y-60526202D01* +X181519559Y-60541602D01* +X181416841Y-60600907D01* +X181332957Y-60684791D01* +X181273652Y-60787509D01* +X181257282Y-60848605D01* +X181246005Y-60890692D01* +X181242950Y-60902092D01* +X181242950Y-60962431D01* +X181224043Y-61020622D01* +X181213954Y-61032435D01* +X180174785Y-62071604D01* +X180120268Y-62099381D01* +X180104781Y-62100600D01* +X161988959Y-62100600D01* +X161930768Y-62081693D01* +X161894804Y-62032193D01* +X161894804Y-61971007D01* +X161918953Y-61931598D01* +X162002739Y-61847813D01* +X162002742Y-61847808D01* +X162062047Y-61745090D01* +X162062047Y-61745088D01* +X162062049Y-61745086D01* +X162092750Y-61630509D01* +X162092750Y-61511891D01* +X162062049Y-61397314D01* +X162062047Y-61397311D01* +X162062047Y-61397309D01* +X162002742Y-61294591D01* +X162002740Y-61294589D01* +X162002739Y-61294587D01* +X161918863Y-61210711D01* +X161918860Y-61210709D01* +X161918858Y-61210707D01* +X161816139Y-61151402D01* +X161816140Y-61151402D01* +X161802601Y-61147774D01* +X161701559Y-61120700D01* +X161582941Y-61120700D01* +X161568360Y-61124607D01* +X161507259Y-61121404D01* +X161459709Y-61082899D01* +X161443874Y-61023798D01* +X161465801Y-60966677D01* +X161472734Y-60958976D01* +X161827114Y-60604596D01* +X161881631Y-60576819D01* +X161897118Y-60575600D01* +X164073741Y-60575600D01* +X164131932Y-60594507D01* +X164143738Y-60604590D01* +X164224737Y-60685589D01* +X164224739Y-60685590D01* +X164224741Y-60685592D01* +X164327460Y-60744897D01* +X164327461Y-60744897D01* +X164327464Y-60744899D01* +X164442041Y-60775600D01* +X164442043Y-60775600D01* +X164560657Y-60775600D01* +X164560659Y-60775600D01* +X164675236Y-60744899D01* +X164675238Y-60744897D01* +X164675240Y-60744897D01* +X164777958Y-60685592D01* +X164777958Y-60685591D01* +X164777963Y-60685589D01* +X164861839Y-60601713D01* +X164862304Y-60600907D01* +X164921147Y-60498990D01* +X164921147Y-60498988D01* +X164921149Y-60498986D01* +X164951850Y-60384409D01* +X164951850Y-60265791D01* +X164922831Y-60157491D01* +X173910250Y-60157491D01* +X173910250Y-60276109D01* +X173930323Y-60351023D01* +X173940952Y-60390690D01* +X174000257Y-60493408D01* +X174000259Y-60493410D01* +X174000261Y-60493413D01* +X174084137Y-60577289D01* +X174084139Y-60577290D01* +X174084141Y-60577292D01* +X174186860Y-60636597D01* +X174186861Y-60636597D01* +X174186864Y-60636599D01* +X174301441Y-60667300D01* +X174301443Y-60667300D01* +X174420057Y-60667300D01* +X174420059Y-60667300D01* +X174534636Y-60636599D01* +X174534638Y-60636597D01* +X174534640Y-60636597D01* +X174637358Y-60577292D01* +X174637358Y-60577291D01* +X174637363Y-60577289D01* +X174721239Y-60493413D01* +X174780549Y-60390686D01* +X174811250Y-60276109D01* +X174811250Y-60157491D01* +X174780549Y-60042914D01* +X174780547Y-60042911D01* +X174780547Y-60042909D01* +X174721242Y-59940191D01* +X174721240Y-59940189D01* +X174721239Y-59940187D01* +X174637363Y-59856311D01* +X174637360Y-59856309D01* +X174637358Y-59856307D01* +X174534639Y-59797002D01* +X174534640Y-59797002D01* +X174521101Y-59793374D01* +X174420059Y-59766300D01* +X174301441Y-59766300D01* +X174231317Y-59785089D01* +X174186859Y-59797002D01* +X174084141Y-59856307D01* +X174000257Y-59940191D01* +X173940952Y-60042909D01* +X173932787Y-60073381D01* +X173910250Y-60157491D01* +X164922831Y-60157491D01* +X164921149Y-60151214D01* +X164898934Y-60112736D01* +X164861842Y-60048491D01* +X164861840Y-60048489D01* +X164861839Y-60048487D01* +X164777963Y-59964611D01* +X164777960Y-59964609D01* +X164777958Y-59964607D01* +X164675239Y-59905302D01* +X164675240Y-59905302D01* +X164661701Y-59901674D01* +X164560659Y-59874600D01* +X164442041Y-59874600D01* +X164371917Y-59893389D01* +X164327459Y-59905302D01* +X164224741Y-59964607D01* +X164224740Y-59964608D01* +X164224737Y-59964610D01* +X164224737Y-59964611D01* +X164143742Y-60045605D01* +X164089228Y-60073381D01* +X164073741Y-60074600D01* +X161813709Y-60074600D01* +X161813701Y-60074599D01* +X161802178Y-60074599D01* +X161702523Y-60074599D01* +X161648589Y-60096939D01* +X161610453Y-60112734D01* +X161539985Y-60183202D01* +X161539986Y-60183203D01* +X161539985Y-60183204D01* +X160874583Y-60848605D01* +X160820066Y-60876382D01* +X160759634Y-60866811D01* +X160716369Y-60823546D01* +X160708954Y-60804228D01* +X160700349Y-60772114D01* +X160700347Y-60772110D01* +X160641042Y-60669391D01* +X160641040Y-60669389D01* +X160641039Y-60669387D01* +X160557163Y-60585511D01* +X160557160Y-60585509D01* +X160557158Y-60585507D01* +X160454439Y-60526202D01* +X160454440Y-60526202D01* +X160440901Y-60522574D01* +X160339859Y-60495500D01* +X160225318Y-60495500D01* +X160167127Y-60476593D01* +X160155314Y-60466504D01* +X159628997Y-59940187D01* +X159163913Y-59475102D01* +X159136137Y-59420587D01* +X159145708Y-59360155D01* +X159188973Y-59316890D01* +X159233918Y-59306100D01* +X160219026Y-59306100D01* +X160277217Y-59325007D01* +X160313181Y-59374507D01* +X160313181Y-59435693D01* +X160304762Y-59454600D01* +X160273752Y-59508309D01* +X160273751Y-59508314D01* +X160243050Y-59622891D01* +X160243050Y-59741509D01* +X160257923Y-59797014D01* +X160273752Y-59856090D01* +X160333057Y-59958808D01* +X160333059Y-59958810D01* +X160333061Y-59958813D01* +X160416937Y-60042689D01* +X160416939Y-60042690D01* +X160416941Y-60042692D01* +X160519660Y-60101997D01* +X160519661Y-60101997D01* +X160519664Y-60101999D01* +X160634241Y-60132700D01* +X160634243Y-60132700D01* +X160752857Y-60132700D01* +X160752859Y-60132700D01* +X160867436Y-60101999D01* +X160867438Y-60101997D01* +X160867440Y-60101997D01* +X160970158Y-60042692D01* +X160970158Y-60042691D01* +X160970163Y-60042689D01* +X161054039Y-59958813D01* +X161084934Y-59905302D01* +X161113347Y-59856090D01* +X161113347Y-59856088D01* +X161113349Y-59856086D01* +X161144050Y-59741509D01* +X161144050Y-59622891D01* +X161113349Y-59508314D01* +X161113347Y-59508311D01* +X161113347Y-59508309D01* +X161082338Y-59454600D01* +X161069616Y-59394752D01* +X161094503Y-59338856D01* +X161147491Y-59308263D01* +X161168074Y-59306100D01* +X188534066Y-59306100D01* +X188592255Y-59325006D01* +X188681156Y-59389596D01* +X188842511Y-59471811D01* +X189014741Y-59527771D01* +X189086286Y-59539102D01* +X189193601Y-59556100D01* +X189193604Y-59556100D01* +X189374699Y-59556100D01* +X189464127Y-59541935D01* +X189553559Y-59527771D01* +X189725789Y-59471811D01* +X189887144Y-59389596D01* +X190033651Y-59283153D01* +X190161703Y-59155101D01* +X190268146Y-59008594D01* +X190350361Y-58847239D01* +X190406321Y-58675009D01* +X190434650Y-58496146D01* +X190434650Y-58315054D01* +X190434650Y-58315050D01* +X190406321Y-58136193D01* +X190406321Y-58136191D01* +X190350361Y-57963961D01* +X190268146Y-57802606D01* +X190161703Y-57656099D01* +X190033651Y-57528047D01* +X189887144Y-57421604D01* +X189887143Y-57421603D01* +X189887141Y-57421602D01* +X189725787Y-57339388D01* +X189553556Y-57283428D01* +X189374699Y-57255100D01* +X189374696Y-57255100D01* +X189193604Y-57255100D01* +X189193601Y-57255100D01* +X189014743Y-57283428D01* +X188842512Y-57339388D01* +X188681158Y-57421602D01* +X188658079Y-57438370D01* +X188592255Y-57486193D01* +X188534066Y-57505100D01* +X157948157Y-57505100D01* +X157889966Y-57486193D01* +X157878153Y-57476104D01* +X156413755Y-56011705D01* +X156392295Y-55979586D01* +X156343298Y-55861297D01* +X156338282Y-55849186D01* +X156228789Y-55685318D01* +X156089432Y-55545961D01* +X155925564Y-55436468D01* +X155921032Y-55434591D01* +X155794527Y-55382191D01* +X166291250Y-55382191D01* +X166291250Y-55500809D01* +X166307481Y-55561382D01* +X166321952Y-55615390D01* +X166381257Y-55718108D01* +X166381259Y-55718110D01* +X166381261Y-55718113D01* +X166465137Y-55801989D01* +X166465139Y-55801990D01* +X166465141Y-55801992D01* +X166567860Y-55861297D01* +X166567861Y-55861297D01* +X166567864Y-55861299D01* +X166682441Y-55892000D01* +X166682443Y-55892000D01* +X166801057Y-55892000D01* +X166801059Y-55892000D01* +X166915636Y-55861299D01* +X166915638Y-55861297D01* +X166915640Y-55861297D01* +X167018358Y-55801992D01* +X167018358Y-55801991D01* +X167018363Y-55801989D01* +X167102239Y-55718113D01* +X167102242Y-55718108D01* +X167161547Y-55615390D01* +X167161547Y-55615388D01* +X167161549Y-55615386D01* +X167192250Y-55500809D01* +X167192250Y-55382191D01* +X167171109Y-55303291D01* +X169862450Y-55303291D01* +X169862450Y-55421909D01* +X169872196Y-55458280D01* +X169893152Y-55536490D01* +X169952457Y-55639208D01* +X169952459Y-55639210D01* +X169952461Y-55639213D01* +X170036337Y-55723089D01* +X170036339Y-55723090D01* +X170036341Y-55723092D01* +X170139060Y-55782397D01* +X170139061Y-55782397D01* +X170139064Y-55782399D01* +X170253641Y-55813100D01* +X170253643Y-55813100D01* +X170372257Y-55813100D01* +X170372259Y-55813100D01* +X170486836Y-55782399D01* +X170486838Y-55782397D01* +X170486840Y-55782397D01* +X170589558Y-55723092D01* +X170589558Y-55723091D01* +X170589563Y-55723089D01* +X170673439Y-55639213D01* +X170698278Y-55596191D01* +X170732747Y-55536490D01* +X170732747Y-55536488D01* +X170732749Y-55536486D01* +X170763450Y-55421909D01* +X170763450Y-55303291D01* +X170732749Y-55188714D01* +X170732747Y-55188711D01* +X170732747Y-55188709D01* +X170673442Y-55085991D01* +X170673440Y-55085989D01* +X170673439Y-55085987D01* +X170589563Y-55002111D01* +X170589560Y-55002109D01* +X170589558Y-55002107D01* +X170486839Y-54942802D01* +X170486841Y-54942802D01* +X170485075Y-54942329D01* +X170372259Y-54912100D01* +X170253641Y-54912100D01* +X170183517Y-54930889D01* +X170139059Y-54942802D01* +X170036341Y-55002107D01* +X169952457Y-55085991D01* +X169893152Y-55188709D01* +X169887519Y-55209732D01* +X169862450Y-55303291D01* +X167171109Y-55303291D01* +X167161549Y-55267614D01* +X167161547Y-55267611D01* +X167161547Y-55267609D01* +X167102242Y-55164891D01* +X167102240Y-55164889D01* +X167102239Y-55164887D01* +X167018363Y-55081011D01* +X167018360Y-55081009D01* +X167018358Y-55081007D01* +X166915639Y-55021702D01* +X166915640Y-55021702D01* +X166902101Y-55018074D01* +X166801059Y-54991000D01* +X166682441Y-54991000D01* +X166627196Y-55005803D01* +X166567859Y-55021702D01* +X166465141Y-55081007D01* +X166381257Y-55164891D01* +X166321952Y-55267609D01* +X166305800Y-55327891D01* +X166291250Y-55382191D01* +X155794527Y-55382191D01* +X155743485Y-55361049D01* +X155550193Y-55322600D01* +X155550191Y-55322600D01* +X155353109Y-55322600D01* +X155353106Y-55322600D01* +X155159815Y-55361049D01* +X155159813Y-55361049D01* +X154977736Y-55436467D01* +X154813868Y-55545961D01* +X154813864Y-55545964D01* +X154674514Y-55685314D01* +X154674511Y-55685318D01* +X154565017Y-55849186D01* +X154489599Y-56031263D01* +X154454486Y-56207784D01* +X154424589Y-56261167D01* +X154369023Y-56286783D01* +X154309014Y-56274846D01* +X154267481Y-56229916D01* +X154259607Y-56203956D01* +X154228409Y-56006978D01* +X154162745Y-55804884D01* +X154066273Y-55615546D01* +X154066269Y-55615540D01* +X154026920Y-55561382D01* +X154026919Y-55561382D01* +X153394612Y-56193689D01* +X153377575Y-56130107D01* +X153311749Y-56016093D01* +X153218657Y-55923001D01* +X153104643Y-55857175D01* +X153041057Y-55840137D01* +X153673366Y-55207829D01* +X153673366Y-55207828D01* +X153619209Y-55168480D01* +X153619203Y-55168476D01* +X153429865Y-55072004D01* +X153227771Y-55006340D01* +X153017900Y-54973100D01* +X152805400Y-54973100D01* +X152595528Y-55006340D01* +X152393434Y-55072004D01* +X152204096Y-55168476D01* +X152204092Y-55168478D01* +X152149932Y-55207828D01* +X152782241Y-55840137D01* +X152718657Y-55857175D01* +X152604643Y-55923001D01* +X152511551Y-56016093D01* +X152445725Y-56130107D01* +X152428687Y-56193691D01* +X151796378Y-55561382D01* +X151757028Y-55615542D01* +X151757026Y-55615546D01* +X151660554Y-55804884D01* +X151594890Y-56006978D01* +X151563692Y-56203956D01* +X151535914Y-56258473D01* +X151481398Y-56286250D01* +X151420966Y-56276679D01* +X151377701Y-56233414D01* +X151368813Y-56207783D01* +X151354337Y-56135009D01* +X151333701Y-56031265D01* +X151258282Y-55849186D01* +X151148789Y-55685318D01* +X151009432Y-55545961D01* +X150880606Y-55459882D01* +X150845563Y-55436467D01* +X150663485Y-55361049D01* +X150560212Y-55340506D01* +X150470193Y-55322600D01* +X150470191Y-55322600D01* +X150273109Y-55322600D01* +X150273106Y-55322600D01* +X150079815Y-55361049D01* +X150079813Y-55361049D01* +X149897736Y-55436467D01* +X149733868Y-55545961D01* +X149733864Y-55545964D01* +X149594514Y-55685314D01* +X149594511Y-55685318D01* +X149485017Y-55849186D01* +X149409599Y-56031263D01* +X149409599Y-56031265D01* +X149371150Y-56224556D01* +X149371150Y-56421643D01* +X149409599Y-56614934D01* +X149409599Y-56614936D01* +X149485017Y-56797013D01* +X149512558Y-56838231D01* +X149594511Y-56960882D01* +X149733868Y-57100239D01* +X149897736Y-57209732D01* +X150079815Y-57285151D01* +X150273109Y-57323600D01* +X150273110Y-57323600D01* +X150470190Y-57323600D01* +X150470191Y-57323600D01* +X150663485Y-57285151D01* +X150845564Y-57209732D01* +X151009432Y-57100239D01* +X151148789Y-56960882D01* +X151258282Y-56797014D01* +X151333701Y-56614935D01* +X151368813Y-56438415D01* +X151398710Y-56385032D01* +X151454275Y-56359416D01* +X151514285Y-56371353D01* +X151555817Y-56416283D01* +X151563692Y-56442243D01* +X151594890Y-56639221D01* +X151660554Y-56841315D01* +X151757026Y-57030653D01* +X151757030Y-57030659D01* +X151796378Y-57084816D01* +X151796379Y-57084816D01* +X152428687Y-56452507D01* +X152445725Y-56516093D01* +X152511551Y-56630107D01* +X152604643Y-56723199D01* +X152718657Y-56789025D01* +X152782239Y-56806062D01* +X152149932Y-57438369D01* +X152149932Y-57438370D01* +X152204090Y-57477719D01* +X152204096Y-57477723D01* +X152393434Y-57574195D01* +X152595528Y-57639859D01* +X152805400Y-57673100D01* +X153017900Y-57673100D01* +X153227771Y-57639859D01* +X153429865Y-57574195D01* +X153619206Y-57477720D01* +X153673366Y-57438370D01* +X153041058Y-56806062D01* +X153104643Y-56789025D01* +X153218657Y-56723199D01* +X153311749Y-56630107D01* +X153377575Y-56516093D01* +X153394612Y-56452508D01* +X154026920Y-57084816D01* +X154066270Y-57030656D01* +X154162745Y-56841315D01* +X154228409Y-56639221D01* +X154259607Y-56442243D01* +X154287384Y-56387727D01* +X154341901Y-56359949D01* +X154402333Y-56369520D01* +X154445598Y-56412785D01* +X154454486Y-56438415D01* +X154489599Y-56614936D01* +X154565017Y-56797013D01* +X154592558Y-56838231D01* +X154674511Y-56960882D01* +X154813868Y-57100239D01* +X154960458Y-57198187D01* +X154977736Y-57209732D01* +X155108136Y-57263745D01* +X155140255Y-57285205D01* +X156834686Y-58979635D01* +X156960115Y-59105064D01* +X157030636Y-59152185D01* +X157068515Y-59200235D01* +X157070917Y-59261373D01* +X157036924Y-59312247D01* +X156979520Y-59333424D01* +X156975634Y-59333500D01* +X144493619Y-59333500D01* +X144435428Y-59314593D01* +X144423615Y-59304504D01* +X142611715Y-57492604D01* +X142583938Y-57438087D01* +X142593509Y-57377655D01* +X142636774Y-57334390D01* +X142681719Y-57323600D01* +X142850190Y-57323600D01* +X142850191Y-57323600D01* +X143043485Y-57285151D01* +X143225564Y-57209732D01* +X143389432Y-57100239D01* +X143528789Y-56960882D01* +X143638282Y-56797014D01* +X143713701Y-56614935D01* +X143752150Y-56421641D01* +X143752150Y-56224559D01* +X143752149Y-56224556D01* +X144291150Y-56224556D01* +X144291150Y-56421643D01* +X144329599Y-56614934D01* +X144329599Y-56614936D01* +X144405017Y-56797013D01* +X144432558Y-56838231D01* +X144514511Y-56960882D01* +X144653868Y-57100239D01* +X144817736Y-57209732D01* +X144999815Y-57285151D01* +X145193109Y-57323600D01* +X145193110Y-57323600D01* +X145390190Y-57323600D01* +X145390191Y-57323600D01* +X145583485Y-57285151D01* +X145765564Y-57209732D01* +X145929432Y-57100239D01* +X146068789Y-56960882D01* +X146178282Y-56797014D01* +X146253701Y-56614935D01* +X146292150Y-56421641D01* +X146292150Y-56224559D01* +X146292149Y-56224556D01* +X146831150Y-56224556D01* +X146831150Y-56421643D01* +X146869599Y-56614934D01* +X146869599Y-56614936D01* +X146945017Y-56797013D01* +X146972558Y-56838231D01* +X147054511Y-56960882D01* +X147193868Y-57100239D01* +X147357736Y-57209732D01* +X147539815Y-57285151D01* +X147733109Y-57323600D01* +X147733110Y-57323600D01* +X147930190Y-57323600D01* +X147930191Y-57323600D01* +X148123485Y-57285151D01* +X148305564Y-57209732D01* +X148469432Y-57100239D01* +X148608789Y-56960882D01* +X148718282Y-56797014D01* +X148793701Y-56614935D01* +X148832150Y-56421641D01* +X148832150Y-56224559D01* +X148793701Y-56031265D01* +X148718282Y-55849186D01* +X148608789Y-55685318D01* +X148469432Y-55545961D01* +X148340606Y-55459882D01* +X148305563Y-55436467D01* +X148123485Y-55361049D01* +X147930193Y-55322600D01* +X147930191Y-55322600D01* +X147733109Y-55322600D01* +X147733106Y-55322600D01* +X147539815Y-55361049D01* +X147539813Y-55361049D01* +X147357736Y-55436467D01* +X147193868Y-55545961D01* +X147193864Y-55545964D01* +X147054514Y-55685314D01* +X147054511Y-55685318D01* +X146945017Y-55849186D01* +X146869599Y-56031263D01* +X146869599Y-56031265D01* +X146831150Y-56224556D01* +X146292149Y-56224556D01* +X146253701Y-56031265D01* +X146178282Y-55849186D01* +X146068789Y-55685318D01* +X145929432Y-55545961D01* +X145800606Y-55459882D01* +X145765563Y-55436467D01* +X145583485Y-55361049D01* +X145390193Y-55322600D01* +X145390191Y-55322600D01* +X145193109Y-55322600D01* +X145193106Y-55322600D01* +X144999815Y-55361049D01* +X144999813Y-55361049D01* +X144817736Y-55436467D01* +X144653868Y-55545961D01* +X144653864Y-55545964D01* +X144514514Y-55685314D01* +X144514511Y-55685318D01* +X144405017Y-55849186D01* +X144329599Y-56031263D01* +X144329599Y-56031265D01* +X144291150Y-56224556D01* +X143752149Y-56224556D01* +X143713701Y-56031265D01* +X143638282Y-55849186D01* +X143528789Y-55685318D01* +X143389432Y-55545961D01* +X143260606Y-55459882D01* +X143225563Y-55436467D01* +X143043485Y-55361049D01* +X142850193Y-55322600D01* +X142850191Y-55322600D01* +X142653109Y-55322600D01* +X142653106Y-55322600D01* +X142459815Y-55361049D01* +X142459813Y-55361049D01* +X142277736Y-55436467D01* +X142113868Y-55545961D01* +X142113864Y-55545964D01* +X141974514Y-55685314D01* +X141974511Y-55685318D01* +X141870200Y-55841430D01* +X141822150Y-55879309D01* +X141761012Y-55881711D01* +X141710138Y-55847718D01* +X141696420Y-55824312D01* +X141695918Y-55823100D01* +X141694014Y-55818503D01* +X141666609Y-55791098D01* +X141623547Y-55748035D01* +X141623547Y-55748036D01* +X140726283Y-54850772D01* +X188133650Y-54850772D01* +X188133650Y-56880427D01* +X188142382Y-56924320D01* +X188142384Y-56924324D01* +X188166811Y-56960882D01* +X188175646Y-56974104D01* +X188225428Y-57007367D01* +X188236477Y-57009564D01* +X188269322Y-57016099D01* +X188269328Y-57016099D01* +X188269330Y-57016100D01* +X188269331Y-57016100D01* +X190298969Y-57016100D01* +X190298970Y-57016100D01* +X190298971Y-57016099D01* +X190298977Y-57016099D01* +X190320773Y-57011762D01* +X190342872Y-57007367D01* +X190392654Y-56974104D01* +X190425917Y-56924322D01* +X190433613Y-56885635D01* +X190434649Y-56880427D01* +X190434650Y-56880418D01* +X190434650Y-54850781D01* +X190434649Y-54850772D01* +X190425917Y-54806879D01* +X190425915Y-54806875D01* +X190392655Y-54757098D01* +X190392654Y-54757096D01* +X190372198Y-54743428D01* +X190342874Y-54723834D01* +X190342870Y-54723832D01* +X190298977Y-54715100D01* +X190298970Y-54715100D01* +X188269330Y-54715100D01* +X188269322Y-54715100D01* +X188225429Y-54723832D01* +X188225425Y-54723834D01* +X188175648Y-54757094D01* +X188175644Y-54757098D01* +X188142384Y-54806875D01* +X188142382Y-54806879D01* +X188133650Y-54850772D01* +X140726283Y-54850772D01* +X139162502Y-53286991D01* +X172956150Y-53286991D01* +X172956150Y-53405609D01* +X172964419Y-53436468D01* +X172986852Y-53520190D01* +X173046157Y-53622908D01* +X173046159Y-53622910D01* +X173046161Y-53622913D01* +X173130037Y-53706789D01* +X173130039Y-53706790D01* +X173130041Y-53706792D01* +X173232760Y-53766097D01* +X173232761Y-53766097D01* +X173232764Y-53766099D01* +X173347341Y-53796800D01* +X173347343Y-53796800D01* +X173465957Y-53796800D01* +X173465959Y-53796800D01* +X173580536Y-53766099D01* +X173580538Y-53766097D01* +X173580540Y-53766097D01* +X173683258Y-53706792D01* +X173683258Y-53706791D01* +X173683263Y-53706789D01* +X173767139Y-53622913D01* +X173826449Y-53520186D01* +X173857150Y-53405609D01* +X173857150Y-53286991D01* +X173826449Y-53172414D01* +X173826447Y-53172411D01* +X173826447Y-53172409D01* +X173767142Y-53069691D01* +X173767140Y-53069689D01* +X173767139Y-53069687D01* +X173683263Y-52985811D01* +X173683260Y-52985809D01* +X173683258Y-52985807D01* +X173580539Y-52926502D01* +X173580540Y-52926502D01* +X173567001Y-52922874D01* +X173465959Y-52895800D01* +X173347341Y-52895800D01* +X173301303Y-52908136D01* +X173232759Y-52926502D01* +X173130041Y-52985807D01* +X173046157Y-53069691D01* +X172986852Y-53172409D01* +X172986851Y-53172414D01* +X172956150Y-53286991D01* +X139162502Y-53286991D01* +X138783647Y-52908136D01* +X138783645Y-52908135D01* +X138783644Y-52908134D01* +X138691579Y-52870000D01* +X138691578Y-52870000D01* +X126353619Y-52870000D01* +X126295428Y-52851093D01* +X126283615Y-52841004D01* +X124933802Y-51491191D01* +X151766450Y-51491191D01* +X151766450Y-51609809D01* +X151793325Y-51710107D01* +X151797152Y-51724390D01* +X151856457Y-51827108D01* +X151856459Y-51827110D01* +X151856461Y-51827113D01* +X151940337Y-51910989D01* +X151940339Y-51910990D01* +X151940341Y-51910992D01* +X152043060Y-51970297D01* +X152043061Y-51970297D01* +X152043064Y-51970299D01* +X152157641Y-52001000D01* +X152157643Y-52001000D01* +X152276257Y-52001000D01* +X152276259Y-52001000D01* +X152390836Y-51970299D01* +X152390838Y-51970297D01* +X152390840Y-51970297D01* +X152493558Y-51910992D01* +X152493558Y-51910991D01* +X152493563Y-51910989D01* +X152577439Y-51827113D01* +X152608690Y-51772986D01* +X152636747Y-51724390D01* +X152636747Y-51724388D01* +X152636749Y-51724386D01* +X152667450Y-51609809D01* +X152667450Y-51539791D01* +X183194250Y-51539791D01* +X183194250Y-51658409D01* +X183208103Y-51710107D01* +X183224952Y-51772990D01* +X183284257Y-51875708D01* +X183284259Y-51875710D01* +X183284261Y-51875713D01* +X183368137Y-51959589D01* +X183368139Y-51959590D01* +X183368141Y-51959592D01* +X183470860Y-52018897D01* +X183470861Y-52018897D01* +X183470864Y-52018899D01* +X183585441Y-52049600D01* +X183585443Y-52049600D01* +X183704057Y-52049600D01* +X183704059Y-52049600D01* +X183818636Y-52018899D01* +X183818638Y-52018897D01* +X183818640Y-52018897D01* +X183921358Y-51959592D01* +X183921358Y-51959591D01* +X183921363Y-51959589D01* +X184005239Y-51875713D01* +X184009100Y-51869025D01* +X184064547Y-51772990D01* +X184064547Y-51772988D01* +X184064549Y-51772986D01* +X184095250Y-51658409D01* +X184095250Y-51539791D01* +X184064549Y-51425214D01* +X184064547Y-51425211D01* +X184064547Y-51425209D01* +X184005242Y-51322491D01* +X184005240Y-51322489D01* +X184005239Y-51322487D01* +X183921363Y-51238611D01* +X183921360Y-51238609D01* +X183921358Y-51238607D01* +X183818639Y-51179302D01* +X183818640Y-51179302D01* +X183805101Y-51175674D01* +X183704059Y-51148600D01* +X183585441Y-51148600D01* +X183515317Y-51167389D01* +X183470859Y-51179302D01* +X183368141Y-51238607D01* +X183284257Y-51322491D01* +X183224952Y-51425209D01* +X183224951Y-51425214D01* +X183194250Y-51539791D01* +X152667450Y-51539791D01* +X152667450Y-51491191D01* +X152636749Y-51376614D01* +X152636747Y-51376611D01* +X152636747Y-51376609D01* +X152577442Y-51273891D01* +X152577440Y-51273889D01* +X152577439Y-51273887D01* +X152493563Y-51190011D01* +X152493560Y-51190009D01* +X152493558Y-51190007D01* +X152390839Y-51130702D01* +X152390840Y-51130702D01* +X152377301Y-51127074D01* +X152276259Y-51100000D01* +X152157641Y-51100000D01* +X152087517Y-51118789D01* +X152043059Y-51130702D01* +X151940341Y-51190007D01* +X151856457Y-51273891D01* +X151797152Y-51376609D01* +X151797151Y-51376614D01* +X151766450Y-51491191D01* +X124933802Y-51491191D01* +X124380702Y-50938091D01* +X189112250Y-50938091D01* +X189112250Y-51056709D01* +X189136872Y-51148600D01* +X189142952Y-51171290D01* +X189202257Y-51274008D01* +X189202259Y-51274010D01* +X189202261Y-51274013D01* +X189286137Y-51357889D01* +X189286139Y-51357890D01* +X189286141Y-51357892D01* +X189388860Y-51417197D01* +X189388861Y-51417197D01* +X189388864Y-51417199D01* +X189503441Y-51447900D01* +X189503443Y-51447900D01* +X189622057Y-51447900D01* +X189622059Y-51447900D01* +X189736636Y-51417199D01* +X189736638Y-51417197D01* +X189736640Y-51417197D01* +X189839358Y-51357892D01* +X189839358Y-51357891D01* +X189839363Y-51357889D01* +X189923239Y-51274013D01* +X189923242Y-51274008D01* +X189982547Y-51171290D01* +X189982547Y-51171288D01* +X189982549Y-51171286D01* +X190013250Y-51056709D01* +X190013250Y-50938091D01* +X189982549Y-50823514D01* +X189982547Y-50823511D01* +X189982547Y-50823509D01* +X189923242Y-50720791D01* +X189923240Y-50720789D01* +X189923239Y-50720787D01* +X189839363Y-50636911D01* +X189839360Y-50636909D01* +X189839358Y-50636907D01* +X189736639Y-50577602D01* +X189736640Y-50577602D01* +X189723101Y-50573974D01* +X189622059Y-50546900D01* +X189503441Y-50546900D01* +X189433317Y-50565689D01* +X189388859Y-50577602D01* +X189286141Y-50636907D01* +X189202257Y-50720791D01* +X189142952Y-50823509D01* +X189142951Y-50823514D01* +X189112250Y-50938091D01* +X124380702Y-50938091D01* +X123176002Y-49733391D01* +X172921650Y-49733391D01* +X172921650Y-49852009D01* +X172933038Y-49894509D01* +X172952352Y-49966590D01* +X173011657Y-50069308D01* +X173011659Y-50069310D01* +X173011661Y-50069313D01* +X173095537Y-50153189D01* +X173095539Y-50153190D01* +X173095541Y-50153192D01* +X173198260Y-50212497D01* +X173198261Y-50212497D01* +X173198264Y-50212499D01* +X173312841Y-50243200D01* +X173312843Y-50243200D01* +X173431457Y-50243200D01* +X173431459Y-50243200D01* +X173546036Y-50212499D01* +X173546038Y-50212497D01* +X173546040Y-50212497D01* +X173648758Y-50153192D01* +X173648758Y-50153191D01* +X173648763Y-50153189D01* +X173732639Y-50069313D01* +X173740821Y-50055142D01* +X173791947Y-49966590D01* +X173791947Y-49966588D01* +X173791949Y-49966586D01* +X173822650Y-49852009D01* +X173822650Y-49775891D01* +X179152850Y-49775891D01* +X179152850Y-49894509D01* +X179169687Y-49957344D01* +X179183552Y-50009090D01* +X179242857Y-50111808D01* +X179242859Y-50111810D01* +X179242861Y-50111813D01* +X179326737Y-50195689D01* +X179326739Y-50195690D01* +X179326741Y-50195692D01* +X179429460Y-50254997D01* +X179429461Y-50254997D01* +X179429464Y-50254999D01* +X179544041Y-50285700D01* +X179544043Y-50285700D01* +X179662657Y-50285700D01* +X179662659Y-50285700D01* +X179777236Y-50254999D01* +X179777238Y-50254997D01* +X179777240Y-50254997D01* +X179879958Y-50195692D01* +X179879958Y-50195691D01* +X179879963Y-50195689D01* +X179963839Y-50111813D01* +X179988377Y-50069313D01* +X180023147Y-50009090D01* +X180023147Y-50009088D01* +X180023149Y-50009086D01* +X180028844Y-49987831D01* +X189880350Y-49987831D01* +X189880350Y-49987931D01* +X189880350Y-50116069D01* +X189899531Y-50212497D01* +X189905349Y-50241742D01* +X189905350Y-50241747D01* +X189954384Y-50360125D01* +X189954388Y-50360133D01* +X189997215Y-50424226D01* +X190025574Y-50466669D01* +X190116181Y-50557276D01* +X190179698Y-50599717D01* +X190222716Y-50628461D01* +X190222720Y-50628463D01* +X190222723Y-50628465D01* +X190341106Y-50677501D01* +X190466781Y-50702500D01* +X198110096Y-50702500D01* +X198168287Y-50721407D01* +X198180100Y-50731496D01* +X209037154Y-61588550D01* +X209064931Y-61643067D01* +X209066150Y-61658554D01* +X209066150Y-62454621D01* +X209066151Y-62454623D01* +X209081002Y-62548399D01* +X209081004Y-62548404D01* +X209138600Y-62661442D01* +X209228308Y-62751150D01* +X209341346Y-62808746D01* +X209435131Y-62823600D01* +X210948168Y-62823599D01* +X210948171Y-62823599D01* +X210948172Y-62823598D01* +X210995061Y-62816172D01* +X211041949Y-62808747D01* +X211041949Y-62808746D01* +X211041954Y-62808746D01* +X211154992Y-62751150D01* +X211244700Y-62661442D01* +X211302296Y-62548404D01* +X211317150Y-62454619D01* +X211317149Y-61191582D01* +X211317149Y-61191578D01* +X211317148Y-61191576D01* +X211302297Y-61097800D01* +X211302296Y-61097798D01* +X211302296Y-61097796D01* +X211244700Y-60984758D01* +X211154992Y-60895050D01* +X211041954Y-60837454D01* +X211041955Y-60837454D01* +X210948172Y-60822600D01* +X210948169Y-60822600D01* +X210152104Y-60822600D01* +X210093913Y-60803693D01* +X210082100Y-60793604D01* +X209754468Y-60465972D01* +X209726691Y-60411455D01* +X209736262Y-60351023D01* +X209779527Y-60307758D01* +X209839959Y-60298187D01* +X209843760Y-60298865D01* +X209968109Y-60323600D01* +X209968110Y-60323600D01* +X210415190Y-60323600D01* +X210415191Y-60323600D01* +X210608485Y-60285151D01* +X210790564Y-60209732D01* +X210954432Y-60100239D01* +X211093789Y-59960882D01* +X211203282Y-59797014D01* +X211278701Y-59614935D01* +X211317150Y-59421641D01* +X211317150Y-59224559D01* +X211278701Y-59031265D01* +X211203282Y-58849186D01* +X211093789Y-58685318D01* +X210954432Y-58545961D01* +X210790564Y-58436468D01* +X210790565Y-58436468D01* +X210790563Y-58436467D01* +X210608486Y-58361049D01* +X210543915Y-58348205D01* +X210490531Y-58318308D01* +X210464916Y-58262742D01* +X210476853Y-58202733D01* +X210521783Y-58161200D01* +X210547743Y-58153326D01* +X210632771Y-58139859D01* +X210834865Y-58074195D01* +X211024202Y-57977724D01* +X211196114Y-57852822D01* +X211346372Y-57702564D01* +X211471274Y-57530652D01* +X211567745Y-57341315D01* +X211633408Y-57139222D01* +X211643881Y-57073100D01* +X210595796Y-57073100D01* +X210634280Y-57006443D01* +X210666650Y-56885635D01* +X210666650Y-56760565D01* +X210634280Y-56639757D01* +X210595796Y-56573100D01* +X211643881Y-56573100D01* +X211643881Y-56573099D01* +X211633408Y-56506977D01* +X211567745Y-56304884D01* +X211471274Y-56115547D01* +X211346372Y-55943635D01* +X211196114Y-55793377D01* +X211024202Y-55668475D01* +X210834865Y-55572004D01* +X210632772Y-55506341D01* +X210547742Y-55492873D01* +X210493226Y-55465095D01* +X210465449Y-55410578D01* +X210475021Y-55350146D01* +X210518286Y-55306882D01* +X210543913Y-55297995D01* +X210608485Y-55285151D01* +X210790564Y-55209732D01* +X210954432Y-55100239D01* +X211093789Y-54960882D01* +X211203282Y-54797014D01* +X211278701Y-54614935D01* +X211317150Y-54421641D01* +X211317150Y-54224559D01* +X211278701Y-54031265D01* +X211203282Y-53849186D01* +X211093789Y-53685318D01* +X210954432Y-53545961D01* +X210790564Y-53436468D01* +X210790565Y-53436468D01* +X210790563Y-53436467D01* +X210608485Y-53361049D01* +X210415193Y-53322600D01* +X210415191Y-53322600D01* +X209968109Y-53322600D01* +X209968106Y-53322600D01* +X209774815Y-53361049D01* +X209774813Y-53361049D01* +X209592736Y-53436467D01* +X209428868Y-53545961D01* +X209428864Y-53545964D01* +X209289514Y-53685314D01* +X209289511Y-53685318D01* +X209180017Y-53849186D01* +X209104599Y-54031263D01* +X209104599Y-54031265D01* +X209066150Y-54224556D01* +X209066150Y-54224559D01* +X209066150Y-54421641D01* +X209101847Y-54601102D01* +X209104599Y-54614934D01* +X209104599Y-54614936D01* +X209180017Y-54797013D01* +X209215938Y-54850772D01* +X209289511Y-54960882D01* +X209428868Y-55100239D01* +X209592736Y-55209732D01* +X209774815Y-55285151D01* +X209839384Y-55297994D01* +X209892767Y-55327891D01* +X209918383Y-55383456D01* +X209906446Y-55443465D01* +X209861517Y-55484998D01* +X209835557Y-55492873D01* +X209750527Y-55506341D01* +X209548434Y-55572004D01* +X209359097Y-55668475D01* +X209187185Y-55793377D01* +X209036927Y-55943635D01* +X208912025Y-56115547D01* +X208815554Y-56304884D01* +X208749891Y-56506977D01* +X208739418Y-56573099D01* +X208739419Y-56573100D01* +X209787504Y-56573100D01* +X209749020Y-56639757D01* +X209716650Y-56760565D01* +X209716650Y-56885635D01* +X209749020Y-57006443D01* +X209787504Y-57073100D01* +X208739419Y-57073100D01* +X208749891Y-57139222D01* +X208815554Y-57341315D01* +X208912025Y-57530652D01* +X209036927Y-57702564D01* +X209187185Y-57852822D01* +X209359097Y-57977724D01* +X209548434Y-58074195D01* +X209750528Y-58139859D01* +X209835556Y-58153326D01* +X209890072Y-58181103D01* +X209917850Y-58235620D01* +X209908279Y-58296052D01* +X209865014Y-58339317D01* +X209839384Y-58348205D01* +X209774813Y-58361049D01* +X209592736Y-58436467D01* +X209428868Y-58545961D01* +X209428864Y-58545964D01* +X209289514Y-58685314D01* +X209289511Y-58685318D01* +X209180017Y-58849186D01* +X209104599Y-59031263D01* +X209104599Y-59031265D01* +X209066150Y-59224556D01* +X209066150Y-59421643D01* +X209090879Y-59545963D01* +X209083687Y-59606724D01* +X209042155Y-59651654D01* +X208982145Y-59663591D01* +X208926580Y-59637975D01* +X208923777Y-59635281D01* +X205961190Y-56672694D01* +X202460905Y-53172409D01* +X198835219Y-49546723D01* +X198835215Y-49546720D01* +X198728676Y-49475534D01* +X198610289Y-49426497D01* +X198609789Y-49426398D01* +X198609782Y-49426397D01* +X198484619Y-49401500D01* +X196294571Y-49401500D01* +X196236380Y-49382593D01* +X196200416Y-49333093D01* +X196200416Y-49271907D01* +X196236380Y-49222407D01* +X196245071Y-49216764D01* +X196294558Y-49188192D01* +X196294558Y-49188191D01* +X196294563Y-49188189D01* +X196378439Y-49104313D01* +X196437749Y-49001586D01* +X196468450Y-48887009D01* +X196468450Y-48768391D01* +X196437749Y-48653814D01* +X196437747Y-48653811D01* +X196437747Y-48653809D01* +X196378442Y-48551091D01* +X196378440Y-48551089D01* +X196378439Y-48551087D01* +X196294563Y-48467211D01* +X196294560Y-48467209D01* +X196294558Y-48467207D01* +X196235641Y-48433191D01* +X199556750Y-48433191D01* +X199556750Y-48551809D01* +X199583824Y-48652851D01* +X199587452Y-48666390D01* +X199646757Y-48769108D01* +X199646759Y-48769110D01* +X199646761Y-48769113D01* +X199730637Y-48852989D01* +X199730639Y-48852990D01* +X199730641Y-48852992D01* +X199833360Y-48912297D01* +X199833361Y-48912297D01* +X199833364Y-48912299D01* +X199947941Y-48943000D01* +X199947943Y-48943000D01* +X200066557Y-48943000D01* +X200066559Y-48943000D01* +X200181136Y-48912299D01* +X200181138Y-48912297D01* +X200181140Y-48912297D01* +X200283858Y-48852992D01* +X200283858Y-48852991D01* +X200283863Y-48852989D01* +X200367739Y-48769113D01* +X200427049Y-48666386D01* +X200457750Y-48551809D01* +X200457750Y-48433191D01* +X200427049Y-48318614D01* +X200427047Y-48318611D01* +X200427047Y-48318609D01* +X200367742Y-48215891D01* +X200367740Y-48215889D01* +X200367739Y-48215887D01* +X200283863Y-48132011D01* +X200283860Y-48132009D01* +X200283858Y-48132007D01* +X200181139Y-48072702D01* +X200181140Y-48072702D01* +X200167601Y-48069074D01* +X200066559Y-48042000D01* +X199947941Y-48042000D01* +X199877817Y-48060789D01* +X199833359Y-48072702D01* +X199730641Y-48132007D01* +X199646757Y-48215891D01* +X199587452Y-48318609D01* +X199573949Y-48369004D01* +X199556750Y-48433191D01* +X196235641Y-48433191D01* +X196191839Y-48407902D01* +X196191840Y-48407902D01* +X196178301Y-48404274D01* +X196077259Y-48377200D01* +X195958641Y-48377200D01* +X195888517Y-48395989D01* +X195844059Y-48407902D01* +X195741341Y-48467207D01* +X195657457Y-48551091D01* +X195598152Y-48653809D01* +X195594782Y-48666386D01* +X195567450Y-48768391D01* +X195567450Y-48887009D01* +X195582453Y-48943000D01* +X195598152Y-49001590D01* +X195657457Y-49104308D01* +X195657459Y-49104310D01* +X195657461Y-49104313D01* +X195741337Y-49188189D01* +X195741339Y-49188190D01* +X195741341Y-49188192D01* +X195790829Y-49216764D01* +X195831770Y-49262233D01* +X195838166Y-49323083D01* +X195807573Y-49376071D01* +X195751677Y-49400958D01* +X195741329Y-49401500D01* +X190600796Y-49401500D01* +X190598759Y-49401400D01* +X190594919Y-49401400D01* +X190466781Y-49401400D01* +X190466780Y-49401400D01* +X190403943Y-49413899D01* +X190341106Y-49426399D01* +X190341105Y-49426399D01* +X190341102Y-49426400D01* +X190222724Y-49475434D01* +X190222716Y-49475438D01* +X190116181Y-49546624D01* +X190116177Y-49546627D01* +X190025577Y-49637227D01* +X190025574Y-49637231D01* +X189954388Y-49743766D01* +X189954384Y-49743774D01* +X189905350Y-49862152D01* +X189905349Y-49862155D01* +X189905349Y-49862156D01* +X189880350Y-49987831D01* +X180028844Y-49987831D01* +X180053850Y-49894509D01* +X180053850Y-49775891D01* +X180023149Y-49661314D01* +X180023147Y-49661311D01* +X180023147Y-49661309D01* +X179963842Y-49558591D01* +X179963840Y-49558589D01* +X179963839Y-49558587D01* +X179879963Y-49474711D01* +X179879960Y-49474709D01* +X179879958Y-49474707D01* +X179777239Y-49415402D01* +X179777240Y-49415402D01* +X179763701Y-49411774D01* +X179662659Y-49384700D01* +X179544041Y-49384700D01* +X179483366Y-49400958D01* +X179429459Y-49415402D01* +X179326741Y-49474707D01* +X179242857Y-49558591D01* +X179183552Y-49661309D01* +X179183551Y-49661314D01* +X179152850Y-49775891D01* +X173822650Y-49775891D01* +X173822650Y-49733391D01* +X173791949Y-49618814D01* +X173791947Y-49618811D01* +X173791947Y-49618809D01* +X173732642Y-49516091D01* +X173732640Y-49516089D01* +X173732639Y-49516087D01* +X173648763Y-49432211D01* +X173648760Y-49432209D01* +X173648758Y-49432207D01* +X173546039Y-49372902D01* +X173546040Y-49372902D01* +X173532501Y-49369274D01* +X173431459Y-49342200D01* +X173312841Y-49342200D01* +X173242717Y-49360989D01* +X173198259Y-49372902D01* +X173095541Y-49432207D01* +X173011657Y-49516091D01* +X172952352Y-49618809D01* +X172952351Y-49618814D01* +X172921650Y-49733391D01* +X123176002Y-49733391D01* +X121385920Y-47943309D01* +X121358143Y-47888792D01* +X121367714Y-47828360D01* +X121410979Y-47785095D01* +X121440437Y-47775524D01* +X121507771Y-47764859D01* +X121709865Y-47699195D01* +X121899202Y-47602724D01* +X122071114Y-47477822D01* +X122221372Y-47327564D01* +X122346274Y-47155652D01* +X122442745Y-46966315D01* +X122508409Y-46764221D01* +X122538680Y-46573100D01* +X121595796Y-46573100D01* +X121634280Y-46506443D01* +X121666650Y-46385635D01* +X121666650Y-46260565D01* +X121634280Y-46139757D01* +X121595796Y-46073100D01* +X122538680Y-46073100D01* +X122538680Y-46073099D01* +X122508409Y-45881978D01* +X122442745Y-45679884D01* +X122346274Y-45490547D01* +X122221372Y-45318635D01* +X122071114Y-45168377D01* +X121899202Y-45043475D01* +X121709865Y-44947004D01* +X121507770Y-44881340D01* +X121441650Y-44870867D01* +X121441650Y-45918954D01* +X121374993Y-45880470D01* +X121254185Y-45848100D01* +X121129115Y-45848100D01* +X121008307Y-45880470D01* +X120941650Y-45918954D01* +X120941650Y-44870868D01* +X120941649Y-44870867D01* +X120875530Y-44881340D01* +X120875528Y-44881340D01* +X120673434Y-44947004D01* +X120484097Y-45043475D01* +X120312185Y-45168377D01* +X120161927Y-45318635D01* +X120037025Y-45490547D01* +X119940554Y-45679884D01* +X119874891Y-45881977D01* +X119861423Y-45967008D01* +X119833645Y-46021524D01* +X119779128Y-46049301D01* +X119718696Y-46039729D01* +X119675432Y-45996464D01* +X119666544Y-45970835D01* +X119653701Y-45906265D01* +X119578282Y-45724186D01* +X119468789Y-45560318D01* +X119329432Y-45420961D01* +X119219938Y-45347799D01* +X119165563Y-45311467D01* +X118983485Y-45236049D01* +X118790193Y-45197600D01* +X118790191Y-45197600D01* +X118593109Y-45197600D01* +X118593106Y-45197600D01* +X118399815Y-45236049D01* +X118399813Y-45236049D01* +X118217736Y-45311467D01* +X118053868Y-45420961D01* +X118053864Y-45420964D01* +X117914514Y-45560314D01* +X117914511Y-45560318D01* +X117805017Y-45724186D01* +X117729599Y-45906263D01* +X117729599Y-45906265D01* +X117691150Y-46099556D01* +X117691150Y-46546643D01* +X117711657Y-46649735D01* +X117726011Y-46721899D01* +X117729599Y-46739934D01* +X117729599Y-46739936D01* +X117805017Y-46922013D01* +X117805018Y-46922014D01* +X117914511Y-47085882D01* +X118053868Y-47225239D01* +X118217736Y-47334732D01* +X118399815Y-47410151D01* +X118593109Y-47448600D01* +X118593110Y-47448600D01* +X118790190Y-47448600D01* +X118790191Y-47448600D01* +X118983485Y-47410151D01* +X119165564Y-47334732D01* +X119329432Y-47225239D01* +X119468789Y-47085882D01* +X119542435Y-46975662D01* +X119590482Y-46937785D01* +X119651620Y-46935383D01* +X119694749Y-46960660D01* +X126066953Y-53332864D01* +X126066954Y-53332864D01* +X126066955Y-53332865D01* +X126159021Y-53371000D01* +X126159022Y-53371000D01* +X126258677Y-53371000D01* +X138496981Y-53371000D01* +X138555172Y-53389907D01* +X138566985Y-53399996D01* +X140320585Y-55153596D01* +X140348362Y-55208113D01* +X140338791Y-55268545D01* +X140295526Y-55311810D01* +X140250581Y-55322600D01* +X140113106Y-55322600D01* +X139919815Y-55361049D01* +X139919813Y-55361049D01* +X139757515Y-55428275D01* +X139696518Y-55433076D01* +X139649626Y-55406815D01* +X139215911Y-54973100D01* +X138773447Y-54530636D01* +X138773445Y-54530635D01* +X138773444Y-54530634D01* +X138681379Y-54492500D01* +X138681378Y-54492500D01* +X122370509Y-54492500D01* +X122370501Y-54492499D01* +X122358978Y-54492499D01* +X122259323Y-54492499D01* +X122205389Y-54514839D01* +X122167253Y-54530634D01* +X122096785Y-54601102D01* +X122096786Y-54601103D01* +X122096785Y-54601104D01* +X120901453Y-55796435D01* +X120901453Y-55796436D01* +X120901449Y-55796439D01* +X120891784Y-55806103D01* +X120837266Y-55833878D01* +X120776834Y-55824303D01* +X120739469Y-55791098D01* +X120719408Y-55761075D01* +X120668789Y-55685318D01* +X120529432Y-55545961D01* +X120400606Y-55459882D01* +X120365563Y-55436467D01* +X120183485Y-55361049D01* +X119990193Y-55322600D01* +X119990191Y-55322600D01* +X119793109Y-55322600D01* +X119793106Y-55322600D01* +X119599815Y-55361049D01* +X119599813Y-55361049D01* +X119417736Y-55436467D01* +X119253868Y-55545961D01* +X119253864Y-55545964D01* +X119114514Y-55685314D01* +X119114511Y-55685318D01* +X119005017Y-55849186D01* +X118929599Y-56031263D01* +X118929599Y-56031265D01* +X118891150Y-56224556D01* +X118891150Y-56421643D01* +X118929599Y-56614934D01* +X118929599Y-56614936D01* +X118996824Y-56777234D01* +X119001624Y-56838231D01* +X118975364Y-56885123D01* +X108439085Y-67421404D01* +X108384568Y-67449181D01* +X108369081Y-67450400D01* +X92626159Y-67450400D01* +X92567968Y-67431493D01* +X92556161Y-67421409D01* +X92475163Y-67340411D01* +X92475160Y-67340409D01* +X92475158Y-67340407D01* +X92372439Y-67281102D01* +X92372440Y-67281102D01* +X92358901Y-67277474D01* +X92257859Y-67250400D01* +X92139241Y-67250400D01* +X92069117Y-67269189D01* +X92024659Y-67281102D01* +X91921941Y-67340407D01* +X91838059Y-67424289D01* +X91776886Y-67530243D01* +X91731416Y-67571183D01* +X91670566Y-67577578D01* +X91617578Y-67546985D01* +X91592692Y-67491090D01* +X91592150Y-67480742D01* +X91592150Y-65867868D01* +X91611057Y-65809677D01* +X91621140Y-65797870D01* +X93854014Y-63564997D01* +X93892150Y-63472928D01* +X93892150Y-63373272D01* +X93892150Y-55458272D01* +X106191150Y-55458272D01* +X106191150Y-57187927D01* +X106199882Y-57231820D01* +X106199884Y-57231824D01* +X106209269Y-57245869D01* +X106233146Y-57281604D01* +X106282928Y-57314867D01* +X106293977Y-57317064D01* +X106326822Y-57323599D01* +X106326828Y-57323599D01* +X106326830Y-57323600D01* +X106326831Y-57323600D01* +X108056469Y-57323600D01* +X108056470Y-57323600D01* +X108056471Y-57323599D01* +X108056477Y-57323599D01* +X108078273Y-57319262D01* +X108100372Y-57314867D01* +X108150154Y-57281604D01* +X108183417Y-57231822D01* +X108187812Y-57209723D01* +X108192149Y-57187927D01* +X108192150Y-57187918D01* +X108192150Y-56224556D01* +X108731150Y-56224556D01* +X108731150Y-56421643D01* +X108769599Y-56614934D01* +X108769599Y-56614936D01* +X108845017Y-56797013D01* +X108872558Y-56838231D01* +X108954511Y-56960882D01* +X109093868Y-57100239D01* +X109257736Y-57209732D01* +X109439815Y-57285151D01* +X109633109Y-57323600D01* +X109633110Y-57323600D01* +X109830190Y-57323600D01* +X109830191Y-57323600D01* +X110023485Y-57285151D01* +X110205564Y-57209732D01* +X110369432Y-57100239D01* +X110508789Y-56960882D01* +X110618282Y-56797014D01* +X110693701Y-56614935D01* +X110732150Y-56421641D01* +X110732150Y-56224559D01* +X110732149Y-56224556D01* +X111271150Y-56224556D01* +X111271150Y-56421643D01* +X111309599Y-56614934D01* +X111309599Y-56614936D01* +X111385017Y-56797013D01* +X111412558Y-56838231D01* +X111494511Y-56960882D01* +X111633868Y-57100239D01* +X111797736Y-57209732D01* +X111979815Y-57285151D01* +X112173109Y-57323600D01* +X112173110Y-57323600D01* +X112370190Y-57323600D01* +X112370191Y-57323600D01* +X112563485Y-57285151D01* +X112745564Y-57209732D01* +X112909432Y-57100239D01* +X113048789Y-56960882D01* +X113158282Y-56797014D01* +X113233701Y-56614935D01* +X113272150Y-56421641D01* +X113272150Y-56224559D01* +X113272149Y-56224556D01* +X113811150Y-56224556D01* +X113811150Y-56421643D01* +X113849599Y-56614934D01* +X113849599Y-56614936D01* +X113925017Y-56797013D01* +X113952558Y-56838231D01* +X114034511Y-56960882D01* +X114173868Y-57100239D01* +X114337736Y-57209732D01* +X114519815Y-57285151D01* +X114713109Y-57323600D01* +X114713110Y-57323600D01* +X114910190Y-57323600D01* +X114910191Y-57323600D01* +X115103485Y-57285151D01* +X115285564Y-57209732D01* +X115449432Y-57100239D01* +X115588789Y-56960882D01* +X115698282Y-56797014D01* +X115773701Y-56614935D01* +X115812150Y-56421641D01* +X115812150Y-56224559D01* +X115812149Y-56224556D01* +X116351150Y-56224556D01* +X116351150Y-56421643D01* +X116389599Y-56614934D01* +X116389599Y-56614936D01* +X116465017Y-56797013D01* +X116492558Y-56838231D01* +X116574511Y-56960882D01* +X116713868Y-57100239D01* +X116877736Y-57209732D01* +X117059815Y-57285151D01* +X117253109Y-57323600D01* +X117253110Y-57323600D01* +X117450190Y-57323600D01* +X117450191Y-57323600D01* +X117643485Y-57285151D01* +X117825564Y-57209732D01* +X117989432Y-57100239D01* +X118128789Y-56960882D01* +X118238282Y-56797014D01* +X118313701Y-56614935D01* +X118352150Y-56421641D01* +X118352150Y-56224559D01* +X118313701Y-56031265D01* +X118238282Y-55849186D01* +X118128789Y-55685318D01* +X117989432Y-55545961D01* +X117860606Y-55459882D01* +X117825563Y-55436467D01* +X117643485Y-55361049D01* +X117450193Y-55322600D01* +X117450191Y-55322600D01* +X117253109Y-55322600D01* +X117253106Y-55322600D01* +X117059815Y-55361049D01* +X117059813Y-55361049D01* +X116877736Y-55436467D01* +X116713868Y-55545961D01* +X116713864Y-55545964D01* +X116574514Y-55685314D01* +X116574511Y-55685318D01* +X116465017Y-55849186D01* +X116389599Y-56031263D01* +X116389599Y-56031265D01* +X116351150Y-56224556D01* +X115812149Y-56224556D01* +X115773701Y-56031265D01* +X115698282Y-55849186D01* +X115588789Y-55685318D01* +X115449432Y-55545961D01* +X115320606Y-55459882D01* +X115285563Y-55436467D01* +X115103485Y-55361049D01* +X114910193Y-55322600D01* +X114910191Y-55322600D01* +X114713109Y-55322600D01* +X114713106Y-55322600D01* +X114519815Y-55361049D01* +X114519813Y-55361049D01* +X114337736Y-55436467D01* +X114173868Y-55545961D01* +X114173864Y-55545964D01* +X114034514Y-55685314D01* +X114034511Y-55685318D01* +X113925017Y-55849186D01* +X113849599Y-56031263D01* +X113849599Y-56031265D01* +X113811150Y-56224556D01* +X113272149Y-56224556D01* +X113233701Y-56031265D01* +X113158282Y-55849186D01* +X113048789Y-55685318D01* +X112909432Y-55545961D01* +X112780606Y-55459882D01* +X112745563Y-55436467D01* +X112563485Y-55361049D01* +X112370193Y-55322600D01* +X112370191Y-55322600D01* +X112173109Y-55322600D01* +X112173106Y-55322600D01* +X111979815Y-55361049D01* +X111979813Y-55361049D01* +X111797736Y-55436467D01* +X111633868Y-55545961D01* +X111633864Y-55545964D01* +X111494514Y-55685314D01* +X111494511Y-55685318D01* +X111385017Y-55849186D01* +X111309599Y-56031263D01* +X111309599Y-56031265D01* +X111271150Y-56224556D01* +X110732149Y-56224556D01* +X110693701Y-56031265D01* +X110618282Y-55849186D01* +X110508789Y-55685318D01* +X110369432Y-55545961D01* +X110240606Y-55459882D01* +X110205563Y-55436467D01* +X110023485Y-55361049D01* +X109830193Y-55322600D01* +X109830191Y-55322600D01* +X109633109Y-55322600D01* +X109633106Y-55322600D01* +X109439815Y-55361049D01* +X109439813Y-55361049D01* +X109257736Y-55436467D01* +X109093868Y-55545961D01* +X109093864Y-55545964D01* +X108954514Y-55685314D01* +X108954511Y-55685318D01* +X108845017Y-55849186D01* +X108769599Y-56031263D01* +X108769599Y-56031265D01* +X108731150Y-56224556D01* +X108192150Y-56224556D01* +X108192150Y-55458281D01* +X108192149Y-55458272D01* +X108183417Y-55414379D01* +X108183415Y-55414375D01* +X108161911Y-55382192D01* +X108150154Y-55364596D01* +X108149490Y-55364152D01* +X108100374Y-55331334D01* +X108100370Y-55331332D01* +X108056477Y-55322600D01* +X108056470Y-55322600D01* +X106326830Y-55322600D01* +X106326822Y-55322600D01* +X106282929Y-55331332D01* +X106282925Y-55331334D01* +X106233148Y-55364594D01* +X106233144Y-55364598D01* +X106199884Y-55414375D01* +X106199882Y-55414379D01* +X106191150Y-55458272D01* +X93892150Y-55458272D01* +X93892150Y-51296849D01* +X109841650Y-51296849D01* +X109841650Y-51509350D01* +X109874890Y-51719221D01* +X109940554Y-51921315D01* +X110037026Y-52110653D01* +X110037030Y-52110659D01* +X110076378Y-52164816D01* +X110076379Y-52164816D01* +X110708687Y-51532507D01* +X110725725Y-51596093D01* +X110791551Y-51710107D01* +X110884643Y-51803199D01* +X110998657Y-51869025D01* +X111062239Y-51886062D01* +X110429932Y-52518369D01* +X110429932Y-52518370D01* +X110484090Y-52557719D01* +X110484096Y-52557723D01* +X110673434Y-52654195D01* +X110875528Y-52719859D01* +X111085400Y-52753100D01* +X111297900Y-52753100D01* +X111507771Y-52719859D01* +X111709865Y-52654195D01* +X111899206Y-52557720D01* +X111953366Y-52518370D01* +X111321058Y-51886062D01* +X111384643Y-51869025D01* +X111498657Y-51803199D01* +X111591749Y-51710107D01* +X111657575Y-51596093D01* +X111674612Y-51532508D01* +X112306920Y-52164816D01* +X112346270Y-52110656D01* +X112442745Y-51921315D01* +X112508409Y-51719221D01* +X112541650Y-51509350D01* +X112541650Y-51296849D01* +X112508409Y-51086978D01* +X112442745Y-50884884D01* +X112346273Y-50695546D01* +X112346269Y-50695540D01* +X112306920Y-50641382D01* +X112306919Y-50641382D01* +X111674612Y-51273689D01* +X111657575Y-51210107D01* +X111591749Y-51096093D01* +X111498657Y-51003001D01* +X111384643Y-50937175D01* +X111321057Y-50920137D01* +X111953366Y-50287829D01* +X111953366Y-50287828D01* +X111899209Y-50248480D01* +X111899203Y-50248476D01* +X111709865Y-50152004D01* +X111507771Y-50086340D01* +X111310793Y-50055142D01* +X111256276Y-50027364D01* +X111228499Y-49972848D01* +X111238070Y-49912416D01* +X111281335Y-49869151D01* +X111306964Y-49860263D01* +X111483485Y-49825151D01* +X111665564Y-49749732D01* +X111829432Y-49640239D01* +X111968789Y-49500882D01* +X112078282Y-49337014D01* +X112153701Y-49154935D01* +X112192150Y-48961641D01* +X112192150Y-48764559D01* +X112153701Y-48571265D01* +X112078282Y-48389186D01* +X112032382Y-48320491D01* +X114307650Y-48320491D01* +X114307650Y-48439109D01* +X114315179Y-48467207D01* +X114338352Y-48553690D01* +X114397657Y-48656408D01* +X114397659Y-48656410D01* +X114397661Y-48656413D01* +X114481537Y-48740289D01* +X114481539Y-48740290D01* +X114481541Y-48740292D01* +X114584260Y-48799597D01* +X114584261Y-48799597D01* +X114584264Y-48799599D01* +X114698841Y-48830300D01* +X114698843Y-48830300D01* +X114817457Y-48830300D01* +X114817459Y-48830300D01* +X114932036Y-48799599D01* +X114932038Y-48799597D01* +X114932040Y-48799597D01* +X115034758Y-48740292D01* +X115034758Y-48740291D01* +X115034763Y-48740289D01* +X115118639Y-48656413D01* +X115120140Y-48653814D01* +X115177947Y-48553690D01* +X115177947Y-48553688D01* +X115177949Y-48553686D01* +X115208650Y-48439109D01* +X115208650Y-48320491D01* +X115177949Y-48205914D01* +X115177947Y-48205911D01* +X115177947Y-48205909D01* +X115118642Y-48103191D01* +X115118640Y-48103189D01* +X115118639Y-48103187D01* +X115034763Y-48019311D01* +X115034760Y-48019309D01* +X115034758Y-48019307D01* +X114932039Y-47960002D01* +X114932040Y-47960002D01* +X114918501Y-47956374D01* +X114817459Y-47929300D01* +X114698841Y-47929300D01* +X114628717Y-47948089D01* +X114584259Y-47960002D01* +X114481541Y-48019307D01* +X114397657Y-48103191D01* +X114338352Y-48205909D01* +X114321187Y-48269969D01* +X114307650Y-48320491D01* +X112032382Y-48320491D01* +X111968789Y-48225318D01* +X111829432Y-48085961D01* +X111665564Y-47976468D01* +X111665565Y-47976468D01* +X111665563Y-47976467D01* +X111483485Y-47901049D01* +X111290193Y-47862600D01* +X111290191Y-47862600D01* +X111093109Y-47862600D01* +X111093106Y-47862600D01* +X110899815Y-47901049D01* +X110899813Y-47901049D01* +X110717736Y-47976467D01* +X110553868Y-48085961D01* +X110553864Y-48085964D01* +X110414514Y-48225314D01* +X110414511Y-48225318D01* +X110305017Y-48389186D01* +X110229599Y-48571263D01* +X110229599Y-48571265D01* +X110191150Y-48764556D01* +X110191150Y-48961643D01* +X110229599Y-49154934D01* +X110229599Y-49154936D01* +X110305017Y-49337013D01* +X110331115Y-49376071D01* +X110414511Y-49500882D01* +X110553868Y-49640239D01* +X110717736Y-49749732D01* +X110899815Y-49825151D01* +X111076333Y-49860263D01* +X111129717Y-49890160D01* +X111155333Y-49945725D01* +X111143396Y-50005735D01* +X111098466Y-50047267D01* +X111072506Y-50055142D01* +X110875528Y-50086340D01* +X110673434Y-50152004D01* +X110484096Y-50248476D01* +X110484092Y-50248478D01* +X110429932Y-50287828D01* +X111062241Y-50920137D01* +X110998657Y-50937175D01* +X110884643Y-51003001D01* +X110791551Y-51096093D01* +X110725725Y-51210107D01* +X110708687Y-51273691D01* +X110076378Y-50641382D01* +X110037028Y-50695542D01* +X110037026Y-50695546D01* +X109940554Y-50884884D01* +X109874890Y-51086978D01* +X109841650Y-51296849D01* +X93892150Y-51296849D01* +X93892150Y-46263791D01* +X94133850Y-46263791D01* +X94133850Y-46382409D01* +X94148395Y-46436692D01* +X94164552Y-46496990D01* +X94223857Y-46599708D01* +X94223859Y-46599710D01* +X94223861Y-46599713D01* +X94307737Y-46683589D01* +X94307739Y-46683590D01* +X94307741Y-46683592D01* +X94410460Y-46742897D01* +X94410461Y-46742897D01* +X94410464Y-46742899D01* +X94525041Y-46773600D01* +X94525043Y-46773600D01* +X94643657Y-46773600D01* +X94643659Y-46773600D01* +X94758236Y-46742899D01* +X94758238Y-46742897D01* +X94758240Y-46742897D01* +X94860958Y-46683592D01* +X94860958Y-46683591D01* +X94860963Y-46683589D01* +X94944839Y-46599713D01* +X94956596Y-46579350D01* +X95004147Y-46496990D01* +X95004147Y-46496988D01* +X95004149Y-46496986D01* +X95034850Y-46382409D01* +X95034850Y-46263791D01* +X95004149Y-46149214D01* +X95004147Y-46149211D01* +X95004147Y-46149209D01* +X94944842Y-46046491D01* +X94944840Y-46046489D01* +X94944839Y-46046487D01* +X94860963Y-45962611D01* +X94860960Y-45962609D01* +X94860958Y-45962607D01* +X94758239Y-45903302D01* +X94758240Y-45903302D01* +X94721046Y-45893336D01* +X94643659Y-45872600D01* +X94525041Y-45872600D01* +X94454917Y-45891389D01* +X94410459Y-45903302D01* +X94307741Y-45962607D01* +X94223857Y-46046491D01* +X94164552Y-46149209D01* +X94148081Y-46210679D01* +X94133850Y-46263791D01* +X93892150Y-46263791D01* +X93892150Y-45566578D01* +X97191150Y-45566578D01* +X97191150Y-47079621D01* +X97191151Y-47079623D01* +X97206002Y-47173399D01* +X97206004Y-47173404D01* +X97263600Y-47286442D01* +X97353308Y-47376150D01* +X97466346Y-47433746D01* +X97560131Y-47448600D01* +X98823168Y-47448599D01* +X98823171Y-47448599D01* +X98823172Y-47448598D01* +X98870061Y-47441172D01* +X98916949Y-47433747D01* +X98916949Y-47433746D01* +X98916954Y-47433746D01* +X99029992Y-47376150D01* +X99119700Y-47286442D01* +X99177296Y-47173404D01* +X99192150Y-47079619D01* +X99192149Y-46826862D01* +X99211056Y-46768675D01* +X99260556Y-46732711D01* +X99321741Y-46732710D01* +X99371241Y-46768674D01* +X99385304Y-46796272D01* +X99440554Y-46966315D01* +X99537025Y-47155652D01* +X99661927Y-47327564D01* +X99812185Y-47477822D01* +X99984097Y-47602724D01* +X100173434Y-47699195D01* +X100375527Y-47764858D01* +X100441649Y-47775331D01* +X100441650Y-47775330D01* +X100441650Y-46727245D01* +X100508307Y-46765730D01* +X100629115Y-46798100D01* +X100754185Y-46798100D01* +X100874993Y-46765730D01* +X100941650Y-46727245D01* +X100941650Y-47775331D01* +X101007772Y-47764858D01* +X101209865Y-47699195D01* +X101399202Y-47602724D01* +X101571114Y-47477822D01* +X101721372Y-47327564D01* +X101846274Y-47155652D01* +X101942745Y-46966315D01* +X102008409Y-46764221D01* +X102021876Y-46679193D01* +X102049653Y-46624677D01* +X102104170Y-46596899D01* +X102164602Y-46606470D01* +X102207866Y-46649735D01* +X102216755Y-46675365D01* +X102229599Y-46739936D01* +X102305017Y-46922013D01* +X102305018Y-46922014D01* +X102414511Y-47085882D01* +X102553868Y-47225239D01* +X102717736Y-47334732D01* +X102899815Y-47410151D01* +X103093109Y-47448600D01* +X103093110Y-47448600D01* +X103290190Y-47448600D01* +X103290191Y-47448600D01* +X103483485Y-47410151D01* +X103665564Y-47334732D01* +X103829432Y-47225239D01* +X103968789Y-47085882D01* +X104078282Y-46922014D01* +X104153701Y-46739935D01* +X104192150Y-46546641D01* +X104192150Y-46099559D01* +X104192149Y-46099556D01* +X104691150Y-46099556D01* +X104691150Y-46546643D01* +X104711657Y-46649735D01* +X104726011Y-46721899D01* +X104729599Y-46739934D01* +X104729599Y-46739936D01* +X104805017Y-46922013D01* +X104805018Y-46922014D01* +X104914511Y-47085882D01* +X105053868Y-47225239D01* +X105217736Y-47334732D01* +X105399815Y-47410151D01* +X105593109Y-47448600D01* +X105593110Y-47448600D01* +X105790190Y-47448600D01* +X105790191Y-47448600D01* +X105983485Y-47410151D01* +X106165564Y-47334732D01* +X106329432Y-47225239D01* +X106468789Y-47085882D01* +X106578282Y-46922014D01* +X106653701Y-46739935D01* +X106692150Y-46546641D01* +X106692150Y-46099559D01* +X106653701Y-45906265D01* +X106578282Y-45724186D01* +X106468789Y-45560318D01* +X106366743Y-45458272D01* +X110191150Y-45458272D01* +X110191150Y-47187927D01* +X110199882Y-47231820D01* +X110199883Y-47231822D01* +X110233146Y-47281604D01* +X110282928Y-47314867D01* +X110293977Y-47317064D01* +X110326822Y-47323599D01* +X110326828Y-47323599D01* +X110326830Y-47323600D01* +X110326831Y-47323600D01* +X112056469Y-47323600D01* +X112056470Y-47323600D01* +X112056471Y-47323599D01* +X112056477Y-47323599D01* +X112078273Y-47319262D01* +X112100372Y-47314867D01* +X112150154Y-47281604D01* +X112183417Y-47231822D01* +X112192150Y-47187920D01* +X112192150Y-45566578D01* +X115191150Y-45566578D01* +X115191150Y-47079621D01* +X115191151Y-47079623D01* +X115206002Y-47173399D01* +X115206004Y-47173404D01* +X115263600Y-47286442D01* +X115353308Y-47376150D01* +X115466346Y-47433746D01* +X115560131Y-47448600D01* +X116823168Y-47448599D01* +X116823171Y-47448599D01* +X116823172Y-47448598D01* +X116870061Y-47441172D01* +X116916949Y-47433747D01* +X116916949Y-47433746D01* +X116916954Y-47433746D01* +X117029992Y-47376150D01* +X117119700Y-47286442D01* +X117177296Y-47173404D01* +X117192150Y-47079619D01* +X117192149Y-45566582D01* +X117192149Y-45566581D01* +X117192149Y-45566578D01* +X117192148Y-45566576D01* +X117177297Y-45472800D01* +X117177296Y-45472798D01* +X117177296Y-45472796D01* +X117119700Y-45359758D01* +X117029992Y-45270050D01* +X116916954Y-45212454D01* +X116916955Y-45212454D01* +X116823171Y-45197600D01* +X115560128Y-45197600D01* +X115560126Y-45197601D01* +X115466350Y-45212452D01* +X115466345Y-45212454D01* +X115353309Y-45270049D01* +X115263599Y-45359759D01* +X115206004Y-45472795D01* +X115191150Y-45566578D01* +X112192150Y-45566578D01* +X112192150Y-45458280D01* +X112192149Y-45458278D01* +X112192149Y-45458272D01* +X112183417Y-45414379D01* +X112183415Y-45414375D01* +X112150155Y-45364598D01* +X112150154Y-45364596D01* +X112142913Y-45359758D01* +X112100374Y-45331334D01* +X112100370Y-45331332D01* +X112056477Y-45322600D01* +X112056470Y-45322600D01* +X110326830Y-45322600D01* +X110326822Y-45322600D01* +X110282929Y-45331332D01* +X110282925Y-45331334D01* +X110233148Y-45364594D01* +X110233144Y-45364598D01* +X110199884Y-45414375D01* +X110199882Y-45414379D01* +X110191150Y-45458272D01* +X106366743Y-45458272D01* +X106329432Y-45420961D01* +X106219938Y-45347799D01* +X106165563Y-45311467D01* +X105983485Y-45236049D01* +X105790193Y-45197600D01* +X105790191Y-45197600D01* +X105593109Y-45197600D01* +X105593106Y-45197600D01* +X105399815Y-45236049D01* +X105399813Y-45236049D01* +X105217736Y-45311467D01* +X105053868Y-45420961D01* +X105053864Y-45420964D01* +X104914514Y-45560314D01* +X104914511Y-45560318D01* +X104805017Y-45724186D01* +X104729599Y-45906263D01* +X104729599Y-45906265D01* +X104691150Y-46099556D01* +X104192149Y-46099556D01* +X104153701Y-45906265D01* +X104078282Y-45724186D01* +X103968789Y-45560318D01* +X103829432Y-45420961D01* +X103719938Y-45347799D01* +X103665563Y-45311467D01* +X103483485Y-45236049D01* +X103290193Y-45197600D01* +X103290191Y-45197600D01* +X103093109Y-45197600D01* +X103093106Y-45197600D01* +X102899815Y-45236049D01* +X102899813Y-45236049D01* +X102717736Y-45311467D01* +X102553868Y-45420961D01* +X102553864Y-45420964D01* +X102414514Y-45560314D01* +X102414511Y-45560318D01* +X102305017Y-45724186D01* +X102229599Y-45906263D01* +X102216755Y-45970834D01* +X102186857Y-46024218D01* +X102131292Y-46049833D01* +X102071283Y-46037896D01* +X102029750Y-45992965D01* +X102021876Y-45967006D01* +X102008409Y-45881978D01* +X101942745Y-45679884D01* +X101846274Y-45490547D01* +X101721372Y-45318635D01* +X101571114Y-45168377D01* +X101399202Y-45043475D01* +X101209865Y-44947004D01* +X101007770Y-44881340D01* +X100941650Y-44870867D01* +X100941650Y-45918954D01* +X100874993Y-45880470D01* +X100754185Y-45848100D01* +X100629115Y-45848100D01* +X100508307Y-45880470D01* +X100441650Y-45918954D01* +X100441650Y-44870868D01* +X100441649Y-44870867D01* +X100375530Y-44881340D01* +X100375528Y-44881340D01* +X100173434Y-44947004D01* +X99984097Y-45043475D01* +X99812185Y-45168377D01* +X99661927Y-45318635D01* +X99537025Y-45490547D01* +X99440554Y-45679884D01* +X99385304Y-45849929D01* +X99349340Y-45899429D01* +X99291149Y-45918336D01* +X99232958Y-45899429D01* +X99196994Y-45849929D01* +X99192149Y-45819336D01* +X99192149Y-45566578D01* +X99192148Y-45566576D01* +X99177297Y-45472800D01* +X99177296Y-45472798D01* +X99177296Y-45472796D01* +X99119700Y-45359758D01* +X99029992Y-45270050D01* +X98916954Y-45212454D01* +X98916955Y-45212454D01* +X98823171Y-45197600D01* +X97560128Y-45197600D01* +X97560126Y-45197601D01* +X97466350Y-45212452D01* +X97466345Y-45212454D01* +X97353309Y-45270049D01* +X97263599Y-45359759D01* +X97206004Y-45472795D01* +X97191150Y-45566578D01* +X93892150Y-45566578D01* +X93892150Y-42782600D01* +X93911057Y-42724409D01* +X93960557Y-42688445D01* +X93991150Y-42683600D01* +X123156881Y-42683600D01* +X123215072Y-42702507D01* +X123226885Y-42712596D01* +X126162154Y-45647864D01* +X126189931Y-45702381D01* +X126191150Y-45717868D01* +X126191150Y-47104621D01* +X126191151Y-47104623D01* +X126206002Y-47198399D01* +X126206004Y-47198404D01* +X126263600Y-47311442D01* +X126353308Y-47401150D01* +X126466346Y-47458746D01* +X126560131Y-47473600D01* +X127823168Y-47473599D01* +X127823171Y-47473599D01* +X127823172Y-47473598D01* +X127870061Y-47466172D01* +X127916949Y-47458747D01* +X127916949Y-47458746D01* +X127916954Y-47458746D01* +X128029992Y-47401150D01* +X128119700Y-47311442D01* +X128177296Y-47198404D01* +X128192150Y-47104619D01* +X128192149Y-46851863D01* +X128211056Y-46793676D01* +X128260556Y-46757712D01* +X128321741Y-46757711D01* +X128371241Y-46793675D01* +X128385304Y-46821273D01* +X128440554Y-46991315D01* +X128537025Y-47180652D01* +X128661927Y-47352564D01* +X128812185Y-47502822D01* +X128984097Y-47627724D01* +X129173434Y-47724195D01* +X129375527Y-47789858D01* +X129441649Y-47800331D01* +X129441650Y-47800330D01* +X129441650Y-46756112D01* +X129498657Y-46789025D01* +X129625824Y-46823100D01* +X129757476Y-46823100D01* +X129884643Y-46789025D01* +X129941650Y-46756112D01* +X129941650Y-47800331D01* +X130007772Y-47789858D01* +X130209865Y-47724195D01* +X130399202Y-47627724D01* +X130571114Y-47502822D01* +X130721372Y-47352564D01* +X130846274Y-47180652D01* +X130942745Y-46991315D01* +X131008409Y-46789221D01* +X131041650Y-46579350D01* +X131041650Y-46573101D01* +X131041649Y-46573100D01* +X130124662Y-46573100D01* +X130157575Y-46516093D01* +X130191650Y-46388926D01* +X130191650Y-46257274D01* +X130157575Y-46130107D01* +X130124662Y-46073100D01* +X131041649Y-46073100D01* +X131041650Y-46073099D01* +X131041650Y-46066849D01* +X131008409Y-45856978D01* +X130942745Y-45654884D01* +X130905933Y-45582636D01* +X130885013Y-45541578D01* +X134791150Y-45541578D01* +X134791150Y-47104621D01* +X134791151Y-47104623D01* +X134806002Y-47198399D01* +X134806004Y-47198404D01* +X134863600Y-47311442D01* +X134953308Y-47401150D01* +X135066346Y-47458746D01* +X135160131Y-47473600D01* +X136423168Y-47473599D01* +X136423171Y-47473599D01* +X136423172Y-47473598D01* +X136470061Y-47466172D01* +X136516949Y-47458747D01* +X136516949Y-47458746D01* +X136516954Y-47458746D01* +X136629992Y-47401150D01* +X136719700Y-47311442D01* +X136777296Y-47198404D01* +X136792150Y-47104619D01* +X136792149Y-46074556D01* +X137291150Y-46074556D01* +X137291150Y-46571643D01* +X137302780Y-46630107D01* +X137327145Y-46752600D01* +X137329599Y-46764934D01* +X137329599Y-46764936D01* +X137405017Y-46947013D01* +X137424162Y-46975665D01* +X137514511Y-47110882D01* +X137653868Y-47250239D01* +X137817736Y-47359732D01* +X137999815Y-47435151D01* +X138193109Y-47473600D01* +X138193110Y-47473600D01* +X138390190Y-47473600D01* +X138390191Y-47473600D01* +X138583485Y-47435151D01* +X138765564Y-47359732D01* +X138929432Y-47250239D01* +X139068789Y-47110882D01* +X139178282Y-46947014D01* +X139253701Y-46764935D01* +X139292150Y-46571641D01* +X139292150Y-46074559D01* +X139280679Y-46016891D01* +X167944250Y-46016891D01* +X167944250Y-46135509D01* +X167967988Y-46224100D01* +X167974952Y-46250090D01* +X168034257Y-46352808D01* +X168034259Y-46352810D01* +X168034261Y-46352813D01* +X168118137Y-46436689D01* +X168118139Y-46436690D01* +X168118141Y-46436692D01* +X168220860Y-46495997D01* +X168220861Y-46495997D01* +X168220864Y-46495999D01* +X168335441Y-46526700D01* +X168335443Y-46526700D01* +X168454057Y-46526700D01* +X168454059Y-46526700D01* +X168568636Y-46495999D01* +X168568638Y-46495997D01* +X168568640Y-46495997D01* +X168671358Y-46436692D01* +X168671358Y-46436691D01* +X168671363Y-46436689D01* +X168755239Y-46352813D01* +X168814549Y-46250086D01* +X168816504Y-46242791D01* +X177094750Y-46242791D01* +X177094750Y-46361409D01* +X177114921Y-46436689D01* +X177125452Y-46475990D01* +X177184757Y-46578708D01* +X177184759Y-46578710D01* +X177184761Y-46578713D01* +X177268637Y-46662589D01* +X177268639Y-46662590D01* +X177268641Y-46662592D01* +X177371360Y-46721897D01* +X177371361Y-46721897D01* +X177371364Y-46721899D01* +X177485941Y-46752600D01* +X177485943Y-46752600D01* +X177604557Y-46752600D01* +X177604559Y-46752600D01* +X177719136Y-46721899D01* +X177719138Y-46721897D01* +X177719140Y-46721897D01* +X177821858Y-46662592D01* +X177821858Y-46662591D01* +X177821863Y-46662589D01* +X177905739Y-46578713D01* +X177941893Y-46516093D01* +X177965047Y-46475990D01* +X177965047Y-46475988D01* +X177965049Y-46475986D01* +X177995750Y-46361409D01* +X177995750Y-46242791D01* +X177965049Y-46128214D01* +X177965047Y-46128211D01* +X177965047Y-46128209D01* +X177905742Y-46025491D01* +X177905740Y-46025489D01* +X177905739Y-46025487D01* +X177821863Y-45941611D01* +X177821860Y-45941609D01* +X177821858Y-45941607D01* +X177719139Y-45882302D01* +X177719140Y-45882302D01* +X177689757Y-45874429D01* +X177604559Y-45851600D01* +X177485941Y-45851600D01* +X177415817Y-45870389D01* +X177371359Y-45882302D01* +X177268641Y-45941607D01* +X177184757Y-46025491D01* +X177125452Y-46128209D01* +X177108287Y-46192269D01* +X177094750Y-46242791D01* +X168816504Y-46242791D01* +X168845250Y-46135509D01* +X168845250Y-46016891D01* +X168814549Y-45902314D01* +X168814547Y-45902311D01* +X168814547Y-45902309D01* +X168755242Y-45799591D01* +X168755240Y-45799589D01* +X168755239Y-45799587D01* +X168671363Y-45715711D01* +X168671360Y-45715709D01* +X168671358Y-45715707D01* +X168568639Y-45656402D01* +X168568640Y-45656402D01* +X168555101Y-45652774D01* +X168454059Y-45625700D01* +X168335441Y-45625700D01* +X168265317Y-45644489D01* +X168220859Y-45656402D01* +X168118141Y-45715707D01* +X168034257Y-45799591D01* +X167974952Y-45902309D01* +X167970426Y-45919200D01* +X167944250Y-46016891D01* +X139280679Y-46016891D01* +X139253701Y-45881265D01* +X139178282Y-45699186D01* +X139068789Y-45535318D01* +X138929432Y-45395961D01* +X138802978Y-45311467D01* +X138765563Y-45286467D01* +X138583485Y-45211049D01* +X138537038Y-45201810D01* +X209341150Y-45201810D01* +X209341150Y-45444389D01* +X209372811Y-45684881D01* +X209372811Y-45684886D01* +X209403547Y-45799591D01* +X209435364Y-45918336D01* +X209435594Y-45919192D01* +X209435598Y-45919205D01* +X209528422Y-46143304D01* +X209528424Y-46143308D01* +X209528426Y-46143312D01* +X209649714Y-46353389D01* +X209649716Y-46353392D01* +X209797379Y-46545831D01* +X209797381Y-46545833D01* +X209797385Y-46545838D01* +X209968912Y-46717365D01* +X209968916Y-46717368D01* +X209968918Y-46717370D01* +X210071746Y-46796272D01* +X210161361Y-46865036D01* +X210371438Y-46986324D01* +X210595550Y-47079154D01* +X210829861Y-47141938D01* +X211070362Y-47173600D01* +X211070363Y-47173600D01* +X211312937Y-47173600D01* +X211312938Y-47173600D01* +X211553439Y-47141938D01* +X211787750Y-47079154D01* +X212011862Y-46986324D01* +X212221939Y-46865036D01* +X212414388Y-46717365D01* +X212585915Y-46545838D01* +X212733586Y-46353389D01* +X212854874Y-46143312D01* +X212947704Y-45919200D01* +X213010488Y-45684889D01* +X213042150Y-45444388D01* +X213042150Y-45201812D01* +X213010488Y-44961311D01* +X212947704Y-44727000D01* +X212854874Y-44502888D01* +X212733586Y-44292811D01* +X212585915Y-44100362D01* +X212414388Y-43928835D01* +X212414383Y-43928831D01* +X212414381Y-43928829D01* +X212221942Y-43781166D01* +X212221939Y-43781164D01* +X212011862Y-43659876D01* +X212011858Y-43659874D01* +X212011854Y-43659872D01* +X211787755Y-43567048D01* +X211787754Y-43567047D01* +X211787750Y-43567046D01* +X211553439Y-43504262D01* +X211553436Y-43504261D01* +X211553434Y-43504261D01* +X211312939Y-43472600D01* +X211312938Y-43472600D01* +X211070362Y-43472600D01* +X211070360Y-43472600D01* +X210829868Y-43504261D01* +X210829863Y-43504261D01* +X210595557Y-43567044D01* +X210595544Y-43567048D01* +X210371445Y-43659872D01* +X210161357Y-43781166D01* +X209968918Y-43928829D01* +X209797379Y-44100368D01* +X209649716Y-44292807D01* +X209528422Y-44502895D01* +X209435598Y-44726994D01* +X209435594Y-44727007D01* +X209372811Y-44961313D01* +X209372811Y-44961318D01* +X209341150Y-45201810D01* +X138537038Y-45201810D01* +X138390193Y-45172600D01* +X138390191Y-45172600D01* +X138193109Y-45172600D01* +X138193106Y-45172600D01* +X137999815Y-45211049D01* +X137999813Y-45211049D01* +X137817736Y-45286467D01* +X137653868Y-45395961D01* +X137653864Y-45395964D01* +X137514514Y-45535314D01* +X137514511Y-45535318D01* +X137405017Y-45699186D01* +X137329599Y-45881263D01* +X137329599Y-45881265D01* +X137291150Y-46074556D01* +X136792149Y-46074556D01* +X136792149Y-45541582D01* +X136792149Y-45541581D01* +X136792149Y-45541578D01* +X136792148Y-45541576D01* +X136777297Y-45447800D01* +X136777296Y-45447798D01* +X136777296Y-45447796D01* +X136719700Y-45334758D01* +X136629992Y-45245050D01* +X136516954Y-45187454D01* +X136516955Y-45187454D01* +X136423171Y-45172600D01* +X135160128Y-45172600D01* +X135160126Y-45172601D01* +X135066350Y-45187452D01* +X135066345Y-45187454D01* +X134953309Y-45245049D01* +X134863599Y-45334759D01* +X134806004Y-45447795D01* +X134791150Y-45541578D01* +X130885013Y-45541578D01* +X130846274Y-45465547D01* +X130721372Y-45293635D01* +X130571114Y-45143377D01* +X130399202Y-45018475D01* +X130209865Y-44922004D01* +X130007770Y-44856340D01* +X129941650Y-44845867D01* +X129941650Y-45890088D01* +X129884643Y-45857175D01* +X129757476Y-45823100D01* +X129625824Y-45823100D01* +X129498657Y-45857175D01* +X129441650Y-45890088D01* +X129441650Y-44845868D01* +X129441649Y-44845867D01* +X129375530Y-44856340D01* +X129375528Y-44856340D01* +X129173434Y-44922004D01* +X128984097Y-45018475D01* +X128812185Y-45143377D01* +X128661927Y-45293635D01* +X128537025Y-45465547D01* +X128440554Y-45654884D01* +X128385304Y-45824929D01* +X128349340Y-45874429D01* +X128291149Y-45893336D01* +X128232958Y-45874429D01* +X128196994Y-45824929D01* +X128192149Y-45794336D01* +X128192149Y-45541578D01* +X128192148Y-45541576D01* +X128177297Y-45447800D01* +X128177296Y-45447798D01* +X128177296Y-45447796D01* +X128119700Y-45334758D01* +X128029992Y-45245050D01* +X127916954Y-45187454D01* +X127916955Y-45187454D01* +X127823171Y-45172600D01* +X126560128Y-45172600D01* +X126560126Y-45172601D01* +X126467753Y-45187230D01* +X126407321Y-45177658D01* +X126382264Y-45159453D01* +X125003975Y-43781164D01* +X123443547Y-42220736D01* +X123443545Y-42220735D01* +X123443544Y-42220734D01* +X123351479Y-42182600D01* +X123351478Y-42182600D01* +X93691478Y-42182600D01* +X93591822Y-42182600D01* +X93591821Y-42182600D01* +X93499755Y-42220734D01* +X93429284Y-42291205D01* +X93391150Y-42383271D01* +X93391150Y-63278331D01* +X93372243Y-63336522D01* +X93362154Y-63348335D01* +X91199753Y-65510736D01* +X91199752Y-65510735D01* +X91129285Y-65581203D01* +X91091150Y-65673271D01* +X91091150Y-69858331D01* +X91072243Y-69916522D01* +X91062154Y-69928334D01* +X87599753Y-73390735D01* +X87599753Y-73390736D01* +X87599752Y-73390735D01* +X87529285Y-73461203D01* +X87491150Y-73553271D01* +X80795006Y-73553271D01* +X80783307Y-61979091D01* +X90620050Y-61979091D01* +X90620050Y-62097709D01* +X90647124Y-62198751D01* +X90650752Y-62212290D01* +X90710057Y-62315008D01* +X90710059Y-62315010D01* +X90710061Y-62315013D01* +X90793937Y-62398889D01* +X90793939Y-62398890D01* +X90793941Y-62398892D01* +X90896660Y-62458197D01* +X90896661Y-62458197D01* +X90896664Y-62458199D01* +X91011241Y-62488900D01* +X91011243Y-62488900D01* +X91129857Y-62488900D01* +X91129859Y-62488900D01* +X91244436Y-62458199D01* +X91244438Y-62458197D01* +X91244440Y-62458197D01* +X91347158Y-62398892D01* +X91347158Y-62398891D01* +X91347163Y-62398889D01* +X91431039Y-62315013D01* +X91490349Y-62212286D01* +X91521050Y-62097709D01* +X91521050Y-61979091D01* +X91490349Y-61864514D01* +X91490347Y-61864511D01* +X91490347Y-61864509D01* +X91431042Y-61761791D01* +X91431040Y-61761789D01* +X91431039Y-61761787D01* +X91347163Y-61677911D01* +X91347160Y-61677909D01* +X91347158Y-61677907D01* +X91244439Y-61618602D01* +X91244440Y-61618602D01* +X91214173Y-61610492D01* +X91129859Y-61587900D01* +X91011241Y-61587900D01* +X90951174Y-61603995D01* +X90896659Y-61618602D01* +X90793941Y-61677907D01* +X90710057Y-61761791D01* +X90650752Y-61864509D01* +X90650751Y-61864514D01* +X90620050Y-61979091D01* +X80783307Y-61979091D01* +X80766348Y-45201810D01* +X83341150Y-45201810D01* +X83341150Y-45444389D01* +X83372811Y-45684881D01* +X83372811Y-45684886D01* +X83403547Y-45799591D01* +X83435364Y-45918336D01* +X83435594Y-45919192D01* +X83435598Y-45919205D01* +X83528422Y-46143304D01* +X83528424Y-46143308D01* +X83528426Y-46143312D01* +X83649714Y-46353389D01* +X83649716Y-46353392D01* +X83797379Y-46545831D01* +X83797381Y-46545833D01* +X83797385Y-46545838D01* +X83968912Y-46717365D01* +X83968916Y-46717368D01* +X83968918Y-46717370D01* +X84071746Y-46796272D01* +X84161361Y-46865036D01* +X84371438Y-46986324D01* +X84595550Y-47079154D01* +X84829861Y-47141938D01* +X85070362Y-47173600D01* +X85070363Y-47173600D01* +X85312937Y-47173600D01* +X85312938Y-47173600D01* +X85553439Y-47141938D01* +X85787750Y-47079154D01* +X86011862Y-46986324D01* +X86221939Y-46865036D01* +X86414388Y-46717365D01* +X86585915Y-46545838D01* +X86733586Y-46353389D01* +X86854874Y-46143312D01* +X86947704Y-45919200D01* +X87010488Y-45684889D01* +X87042150Y-45444388D01* +X87042150Y-45201812D01* +X87010488Y-44961311D01* +X86947704Y-44727000D01* +X86854874Y-44502888D01* +X86733586Y-44292811D01* +X86585915Y-44100362D01* +X86414388Y-43928835D01* +X86414383Y-43928831D01* +X86414381Y-43928829D01* +X86221942Y-43781166D01* +X86221939Y-43781164D01* +X86011862Y-43659876D01* +X86011858Y-43659874D01* +X86011854Y-43659872D01* +X85787755Y-43567048D01* +X85787754Y-43567047D01* +X85787750Y-43567046D01* +X85553439Y-43504262D01* +X85553436Y-43504261D01* +X85553434Y-43504261D01* +X85312939Y-43472600D01* +X85312938Y-43472600D01* +X85070362Y-43472600D01* +X85070360Y-43472600D01* +X84829868Y-43504261D01* +X84829863Y-43504261D01* +X84595557Y-43567044D01* +X84595544Y-43567048D01* +X84371445Y-43659872D01* +X84161357Y-43781166D01* +X83968918Y-43928829D01* +X83797379Y-44100368D01* +X83649716Y-44292807D01* +X83528422Y-44502895D01* +X83435598Y-44726994D01* +X83435594Y-44727007D01* +X83372811Y-44961313D01* +X83372811Y-44961318D01* +X83341150Y-45201810D01* +X80766348Y-45201810D01* +X80762023Y-40922698D01* +X80780872Y-40864490D01* +X80830335Y-40828476D01* +X80861023Y-40823600D01* +X214592150Y-40823600D01* +X214650341Y-40842507D01* +G37* +%TD.AperFunction*% +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Mask.gbs b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Mask.gbs new file mode 100644 index 0000000..65c5f93 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Mask.gbs @@ -0,0 +1,312 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Soldermask,Bot*% +%TF.FilePolarity,Negative*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%ADD10RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*% +%ADD11O,1.700000X1.950000*% +%ADD12RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*% +%ADD13O,1.950000X1.700000*% +%ADD14RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*% +%ADD15RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*% +%ADD16O,2.000000X1.700000*% +%ADD17R,1.700000X1.700000*% +%ADD18C,1.700000*% +%ADD19RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*% +%ADD20O,1.700000X2.000000*% +%ADD21R,1.350000X1.350000*% +%ADD22C,1.350000*% +%ADD23C,6.000000*% +%ADD24RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*% +%ADD25C,0.700000*% +%ADD26O,0.900000X2.400000*% +%ADD27O,0.900000X1.700000*% +%ADD28RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*% +%ADD29C,2.600000*% +%ADD30R,2.000000X2.000000*% +%ADD31C,2.000000*% +%ADD32R,1.600000X1.600000*% +%ADD33O,1.600000X1.600000*% +G04 APERTURE END LIST* +D10* +%TO.C,P13*% +X116191650Y-46323100D03* +D11* +X118691650Y-46323100D03* +X121191650Y-46323100D03* +%TD*% +D12* +%TO.C,P6*% +X210191650Y-61823100D03* +D13* +X210191650Y-59323100D03* +X210191650Y-56823100D03* +X210191650Y-54323100D03* +%TD*% +D14* +%TO.C,P4*% +X210191650Y-108323100D03* +D13* +X210191650Y-105823100D03* +X210191650Y-103323100D03* +%TD*% +D15* +%TO.C,P10*% +X210166650Y-80073100D03* +D16* +X210166650Y-77573100D03* +%TD*% +D17* +%TO.C,J1*% +X107191650Y-56323100D03* +D18* +X109731650Y-56323100D03* +X112271650Y-56323100D03* +X114811650Y-56323100D03* +X117351650Y-56323100D03* +X119891650Y-56323100D03* +X122431650Y-56323100D03* +X124971650Y-56323100D03* +X127511650Y-56323100D03* +X130051650Y-56323100D03* +X132591650Y-56323100D03* +X135131650Y-56323100D03* +X137671650Y-56323100D03* +X140211650Y-56323100D03* +X142751650Y-56323100D03* +X145291650Y-56323100D03* +X147831650Y-56323100D03* +X150371650Y-56323100D03* +X152911650Y-56323100D03* +X155451650Y-56323100D03* +%TD*% +D19* +%TO.C,P11*% +X135791650Y-46323100D03* +D20* +X138291650Y-46323100D03* +%TD*% +D21* +%TO.C,J7*% +X174191650Y-74823100D03* +D22* +X174191650Y-76823100D03* +X174191650Y-78823100D03* +X174191650Y-80823100D03* +X174191650Y-82823100D03* +X174191650Y-84823100D03* +X174191650Y-86823100D03* +X174191650Y-88823100D03* +X174191650Y-90823100D03* +X174191650Y-92823100D03* +%TD*% +D23* +%TO.C,MH3*% +X85191650Y-135323100D03* +%TD*% +%TO.C,MH4*% +X211191650Y-135323100D03* +%TD*% +D19* +%TO.C,P2*% +X127191650Y-46323100D03* +D20* +X129691650Y-46323100D03* +%TD*% +D17* +%TO.C,H3*% +X111191650Y-46323100D03* +D18* +X111191650Y-48863100D03* +X111191650Y-51403100D03* +%TD*% +D21* +%TO.C,J8*% +X196541650Y-74823100D03* +D22* +X196541650Y-76823100D03* +X196541650Y-78823100D03* +X196541650Y-80823100D03* +X196541650Y-82823100D03* +X196541650Y-84823100D03* +X196541650Y-86823100D03* +X196541650Y-88823100D03* +X196541650Y-90823100D03* +X196541650Y-92823100D03* +%TD*% +D10* +%TO.C,P5*% +X98191650Y-46323100D03* +D11* +X100691650Y-46323100D03* +X103191650Y-46323100D03* +X105691650Y-46323100D03* +%TD*% +D15* +%TO.C,P8*% +X210166650Y-70823100D03* +D16* +X210166650Y-68323100D03* +%TD*% +D24* +%TO.C,P12*% +X210191650Y-121323100D03* +D16* +X210191650Y-118823100D03* +%TD*% +D25* +%TO.C,J9*% +X161175000Y-129425000D03* +X162025000Y-129425000D03* +X162875000Y-129425000D03* +X163725000Y-129425000D03* +X164575000Y-129425000D03* +X165425000Y-129425000D03* +X166275000Y-129425000D03* +X167125000Y-129425000D03* +X167125000Y-130775000D03* +X166275000Y-130775000D03* +X165425000Y-130775000D03* +X164575000Y-130775000D03* +X163725000Y-130775000D03* +X162875000Y-130775000D03* +X162025000Y-130775000D03* +X161175000Y-130775000D03* +D26* +X159825000Y-130405000D03* +D27* +X159825000Y-133785000D03* +D26* +X168475000Y-130405000D03* +D27* +X168475000Y-133785000D03* +%TD*% +D28* +%TO.C,P1*% +X172691650Y-133823100D03* +D29* +X177691650Y-133823100D03* +X182691650Y-133823100D03* +X187691650Y-133823100D03* +X192691650Y-133823100D03* +%TD*% +D23* +%TO.C,MH2*% +X211191650Y-45323100D03* +%TD*% +D30* +%TO.C,K1*% +X189284150Y-55865600D03* +D31* +X189284150Y-58405600D03* +X189284150Y-66025600D03* +X194364150Y-66025600D03* +X194364150Y-58405600D03* +X194364150Y-55865600D03* +%TD*% +D17* +%TO.C,J2*% +X107191650Y-74103100D03* +D18* +X109731650Y-74103100D03* +X112271650Y-74103100D03* +X114811650Y-74103100D03* +X117351650Y-74103100D03* +X119891650Y-74103100D03* +X122431650Y-74103100D03* +X124971650Y-74103100D03* +X127511650Y-74103100D03* +X130051650Y-74103100D03* +X132591650Y-74103100D03* +X135131650Y-74103100D03* +X137671650Y-74103100D03* +X140211650Y-74103100D03* +X142751650Y-74103100D03* +X145291650Y-74103100D03* +X147831650Y-74103100D03* +X150371650Y-74103100D03* +X152911650Y-74103100D03* +X155451650Y-74103100D03* +%TD*% +D23* +%TO.C,MH1*% +X85191650Y-45323100D03* +%TD*% +D31* +%TO.C,SW1*% +X199191650Y-133323100D03* +X205691650Y-133323100D03* +X199191650Y-137823100D03* +X205691650Y-137823100D03* +%TD*% +D14* +%TO.C,P3*% +X210191650Y-95323100D03* +D13* +X210191650Y-92823100D03* +X210191650Y-90323100D03* +X210191650Y-87823100D03* +%TD*% +D32* +%TO.C,MOD1*% +X115251650Y-129583100D03* +D33* +X117791650Y-129583100D03* +X120331650Y-129583100D03* +X122871650Y-129583100D03* +X125411650Y-129583100D03* +X127951650Y-129583100D03* +X130491650Y-129583100D03* +X133031650Y-129583100D03* +X138111650Y-129583100D03* +X140651650Y-129583100D03* +X143191650Y-129583100D03* +X145731650Y-129583100D03* +X148271650Y-129583100D03* +X150811650Y-129583100D03* +X150811650Y-81323100D03* +X148271650Y-81323100D03* +X145731650Y-81323100D03* +X143191650Y-81323100D03* +X140651650Y-81323100D03* +X138111650Y-81323100D03* +X135571650Y-81323100D03* +X133031650Y-81323100D03* +X128971650Y-81323100D03* +X126431650Y-81323100D03* +X123891650Y-81323100D03* +X121351650Y-81323100D03* +X118811650Y-81323100D03* +X116271650Y-81323100D03* +X113731650Y-81323100D03* +X111191650Y-81323100D03* +X108651650Y-81323100D03* +X106111650Y-81323100D03* +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Paste.gbp b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Paste.gbp new file mode 100644 index 0000000..ad8724e --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Paste.gbp @@ -0,0 +1,15 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Paste,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 APERTURE END LIST* +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Silkscreen.gbo b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Silkscreen.gbo new file mode 100644 index 0000000..81d26d3 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-B_Silkscreen.gbo @@ -0,0 +1,129 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Legend,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.150000*% +%ADD11C,0.120000*% +G04 APERTURE END LIST* +D10* +X118354982Y-133847919D02* +X118354982Y-132847919D01* +X118354982Y-132847919D02* +X118021649Y-133562204D01* +X118021649Y-133562204D02* +X117688316Y-132847919D01* +X117688316Y-132847919D02* +X117688316Y-133847919D01* +X117021649Y-132847919D02* +X116831173Y-132847919D01* +X116831173Y-132847919D02* +X116735935Y-132895538D01* +X116735935Y-132895538D02* +X116640697Y-132990776D01* +X116640697Y-132990776D02* +X116593078Y-133181252D01* +X116593078Y-133181252D02* +X116593078Y-133514585D01* +X116593078Y-133514585D02* +X116640697Y-133705061D01* +X116640697Y-133705061D02* +X116735935Y-133800300D01* +X116735935Y-133800300D02* +X116831173Y-133847919D01* +X116831173Y-133847919D02* +X117021649Y-133847919D01* +X117021649Y-133847919D02* +X117116887Y-133800300D01* +X117116887Y-133800300D02* +X117212125Y-133705061D01* +X117212125Y-133705061D02* +X117259744Y-133514585D01* +X117259744Y-133514585D02* +X117259744Y-133181252D01* +X117259744Y-133181252D02* +X117212125Y-132990776D01* +X117212125Y-132990776D02* +X117116887Y-132895538D01* +X117116887Y-132895538D02* +X117021649Y-132847919D01* +X116164506Y-133847919D02* +X116164506Y-132847919D01* +X116164506Y-132847919D02* +X115926411Y-132847919D01* +X115926411Y-132847919D02* +X115783554Y-132895538D01* +X115783554Y-132895538D02* +X115688316Y-132990776D01* +X115688316Y-132990776D02* +X115640697Y-133086014D01* +X115640697Y-133086014D02* +X115593078Y-133276490D01* +X115593078Y-133276490D02* +X115593078Y-133419347D01* +X115593078Y-133419347D02* +X115640697Y-133609823D01* +X115640697Y-133609823D02* +X115688316Y-133705061D01* +X115688316Y-133705061D02* +X115783554Y-133800300D01* +X115783554Y-133800300D02* +X115926411Y-133847919D01* +X115926411Y-133847919D02* +X116164506Y-133847919D01* +X114640697Y-133847919D02* +X115212125Y-133847919D01* +X114926411Y-133847919D02* +X114926411Y-132847919D01* +X114926411Y-132847919D02* +X115021649Y-132990776D01* +X115021649Y-132990776D02* +X115116887Y-133086014D01* +X115116887Y-133086014D02* +X115212125Y-133133633D01* +%TO.C,MOD1*% +D11* +X80831650Y-88183100D02* +X87181650Y-88183100D01* +X80831650Y-99863100D02* +X80831650Y-88183100D01* +X85281650Y-119933100D02* +X87181650Y-119933100D01* +X85281650Y-129073100D02* +X85281650Y-119933100D01* +X87181650Y-78653100D02* +X151831650Y-78653100D01* +X87181650Y-88183100D02* +X87181650Y-78653100D01* +X87181650Y-99863100D02* +X80831650Y-99863100D01* +X87181650Y-119933100D02* +X87181650Y-99863100D01* +X87181650Y-129073100D02* +X85281650Y-129073100D01* +X87181650Y-132253100D02* +X87181650Y-129073100D01* +X151831650Y-78653100D02* +X153481650Y-80303100D01* +X153481650Y-80303100D02* +X153481650Y-91733100D01* +X153481650Y-91733100D02* +X156021650Y-94273100D01* +X153481650Y-129583100D02* +X153481650Y-132253100D01* +X153481650Y-132253100D02* +X87181650Y-132253100D01* +X156021650Y-94273100D02* +X156021650Y-127043100D01* +X156021650Y-127043100D02* +X153481650Y-129583100D01* +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-Edge_Cuts.gm1 b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-Edge_Cuts.gm1 new file mode 100644 index 0000000..d635283 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-Edge_Cuts.gm1 @@ -0,0 +1,26 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Profile,NP*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%TA.AperFunction,Profile*% +%ADD10C,0.100000*% +%TD*% +G04 APERTURE END LIST* +D10* +X80191650Y-40323100D02* +X215191650Y-40323100D01* +X80191650Y-140323100D02* +X80191650Y-40323100D01* +X215191650Y-40323100D02* +X215191650Y-140323100D01* +X215191650Y-140323100D02* +X80191650Y-140323100D01* +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Cu.gtl b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Cu.gtl new file mode 100644 index 0000000..e25c1a8 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Cu.gtl @@ -0,0 +1,27503 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L1,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +%AMFreePoly0* +4,1,23,0.550000,-0.750000,0.000000,-0.750000,0.000000,-0.745722,-0.065263,-0.745722,-0.191342,-0.711940,-0.304381,-0.646677,-0.396677,-0.554381,-0.461940,-0.441342,-0.495722,-0.315263,-0.495722,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.495722,0.250000,-0.495722,0.315263,-0.461940,0.441342,-0.396677,0.554381,-0.304381,0.646677,-0.191342,0.711940,-0.065263,0.745722,0.000000,0.745722, +0.000000,0.750000,0.550000,0.750000,0.550000,-0.750000,0.550000,-0.750000,$1*% +%AMFreePoly1* +4,1,23,0.000000,0.745722,0.065263,0.745722,0.191342,0.711940,0.304381,0.646677,0.396677,0.554381,0.461940,0.441342,0.495722,0.315263,0.495722,0.250000,0.500000,0.250000,0.500000,-0.250000,0.495722,-0.250000,0.495722,-0.315263,0.461940,-0.441342,0.396677,-0.554381,0.304381,-0.646677,0.191342,-0.711940,0.065263,-0.745722,0.000000,-0.745722,0.000000,-0.750000,-0.550000,-0.750000, +-0.550000,0.750000,0.000000,0.750000,0.000000,0.745722,0.000000,0.745722,$1*% +%AMFreePoly2* +4,1,23,0.500000,-0.750000,0.000000,-0.750000,0.000000,-0.745722,-0.065263,-0.745722,-0.191342,-0.711940,-0.304381,-0.646677,-0.396677,-0.554381,-0.461940,-0.441342,-0.495722,-0.315263,-0.495722,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.495722,0.250000,-0.495722,0.315263,-0.461940,0.441342,-0.396677,0.554381,-0.304381,0.646677,-0.191342,0.711940,-0.065263,0.745722,0.000000,0.745722, +0.000000,0.750000,0.500000,0.750000,0.500000,-0.750000,0.500000,-0.750000,$1*% +%AMFreePoly3* +4,1,23,0.000000,0.745722,0.065263,0.745722,0.191342,0.711940,0.304381,0.646677,0.396677,0.554381,0.461940,0.441342,0.495722,0.315263,0.495722,0.250000,0.500000,0.250000,0.500000,-0.250000,0.495722,-0.250000,0.495722,-0.315263,0.461940,-0.441342,0.396677,-0.554381,0.304381,-0.646677,0.191342,-0.711940,0.065263,-0.745722,0.000000,-0.745722,0.000000,-0.750000,-0.500000,-0.750000, +-0.500000,0.750000,0.000000,0.750000,0.000000,0.745722,0.000000,0.745722,$1*% +G04 Aperture macros list end* +%TA.AperFunction,EtchedComponent*% +%ADD10C,0.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD11RoundRect,0.200000X-0.200000X-0.275000X0.200000X-0.275000X0.200000X0.275000X-0.200000X0.275000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD12RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD13O,1.700000X1.950000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD14RoundRect,0.200000X0.200000X0.275000X-0.200000X0.275000X-0.200000X-0.275000X0.200000X-0.275000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD15RoundRect,0.250000X-0.650000X1.000000X-0.650000X-1.000000X0.650000X-1.000000X0.650000X1.000000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD16RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD17O,1.950000X1.700000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD18RoundRect,0.243750X-0.243750X-0.456250X0.243750X-0.456250X0.243750X0.456250X-0.243750X0.456250X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD19RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD20RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD21O,2.000000X1.700000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD22RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD23RoundRect,0.150000X0.825000X0.150000X-0.825000X0.150000X-0.825000X-0.150000X0.825000X-0.150000X0*% +%TD*% +%TA.AperFunction,HeatsinkPad*% +%ADD24R,2.290000X3.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD25R,1.700000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD26C,1.700000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD27RoundRect,0.225000X-0.225000X-0.250000X0.225000X-0.250000X0.225000X0.250000X-0.225000X0.250000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD28RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD29O,1.700000X2.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD30RoundRect,0.150000X-0.587500X-0.150000X0.587500X-0.150000X0.587500X0.150000X-0.587500X0.150000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD31RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD32RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD33R,0.500000X0.300000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD34RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD35R,1.350000X1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD36C,1.350000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD37RoundRect,0.250000X-1.000000X-0.650000X1.000000X-0.650000X1.000000X0.650000X-1.000000X0.650000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD38RoundRect,0.250000X-0.312500X-0.625000X0.312500X-0.625000X0.312500X0.625000X-0.312500X0.625000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD39RoundRect,0.250000X-1.000000X-0.900000X1.000000X-0.900000X1.000000X0.900000X-1.000000X0.900000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD40RoundRect,0.200000X-0.275000X0.200000X-0.275000X-0.200000X0.275000X-0.200000X0.275000X0.200000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD41R,2.000000X3.200000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD42RoundRect,0.087500X-0.250000X-0.087500X0.250000X-0.087500X0.250000X0.087500X-0.250000X0.087500X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD43C,1.500000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD44R,1.250000X1.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD45RoundRect,0.250000X1.100000X-0.325000X1.100000X0.325000X-1.100000X0.325000X-1.100000X-0.325000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD46RoundRect,0.200000X0.275000X-0.200000X0.275000X0.200000X-0.275000X0.200000X-0.275000X-0.200000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD47FreePoly0,0.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD48R,1.000000X1.500000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD49FreePoly1,0.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD50FreePoly2,0.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD51FreePoly3,0.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD52RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD53RoundRect,0.250000X-0.325000X-1.100000X0.325000X-1.100000X0.325000X1.100000X-0.325000X1.100000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD54C,0.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD55O,0.900000X2.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD56O,0.900000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD57RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD58C,2.600000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD59RoundRect,0.250000X-0.312500X-1.450000X0.312500X-1.450000X0.312500X1.450000X-0.312500X1.450000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD60R,2.000000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD61C,2.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD62RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD63RoundRect,0.062500X-0.362500X-0.062500X0.362500X-0.062500X0.362500X0.062500X-0.362500X0.062500X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD64RoundRect,0.062500X-0.062500X-0.362500X0.062500X-0.362500X0.062500X0.362500X-0.062500X0.362500X0*% +%TD*% +%TA.AperFunction,HeatsinkPad*% +%ADD65R,2.650000X3.650000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD66RoundRect,0.250000X-0.850000X-0.350000X0.850000X-0.350000X0.850000X0.350000X-0.850000X0.350000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD67RoundRect,0.249997X-2.950003X-2.650003X2.950003X-2.650003X2.950003X2.650003X-2.950003X2.650003X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD68RoundRect,0.250000X0.550000X-1.500000X0.550000X1.500000X-0.550000X1.500000X-0.550000X-1.500000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD69RoundRect,0.225000X-0.225000X-0.375000X0.225000X-0.375000X0.225000X0.375000X-0.225000X0.375000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD70RoundRect,0.225000X0.225000X0.375000X-0.225000X0.375000X-0.225000X-0.375000X0.225000X-0.375000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD71R,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD72O,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD73C,0.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD74C,0.800000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD75C,0.200000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD76C,1.500000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD77C,1.000000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD78C,0.400000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD79C,0.250000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD80C,0.801400*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD81C,0.601000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD82C,1.049800*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD83C,0.250200*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD84C,0.999800*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD85C,1.001800*% +%TD*% +G04 APERTURE END LIST* +D10* +%TA.AperFunction,EtchedComponent*% +%TO.C,JP4*% +G36* +X140991650Y-100123100D02* +G01* +X140491650Y-100123100D01* +X140491650Y-99523100D01* +X140991650Y-99523100D01* +X140991650Y-100123100D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,EtchedComponent*% +%TO.C,JP3*% +G36* +X140991650Y-95123100D02* +G01* +X140491650Y-95123100D01* +X140491650Y-94523100D01* +X140991650Y-94523100D01* +X140991650Y-95123100D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,EtchedComponent*% +%TO.C,JP2*% +G36* +X140991650Y-90623100D02* +G01* +X140491650Y-90623100D01* +X140491650Y-90023100D01* +X140991650Y-90023100D01* +X140991650Y-90623100D01* +G37* +%TD.AperFunction*% +%TD*% +D11* +%TO.P,R2,1*% +%TO.N,/GATE_LS*% +X166541650Y-59323100D03* +%TO.P,R2,2*% +%TO.N,/SYS5V*% +X168191650Y-59323100D03* +%TD*% +D12* +%TO.P,P13,1,Pin_1_1*% +%TO.N,USART1_RX*% +X116191650Y-46323100D03* +D13* +%TO.P,P13,2,Pin_2_2*% +%TO.N,/DIN_4G*% +X118691650Y-46323100D03* +%TO.P,P13,3,Pin_3_3*% +%TO.N,GND*% +X121191650Y-46323100D03* +%TD*% +D14* +%TO.P,Rigb,1*% +%TO.N,IGN_SENSE*% +X102191650Y-74323100D03* +%TO.P,Rigb,2*% +%TO.N,GND*% +X100541650Y-74323100D03* +%TD*% +D15* +%TO.P,Dbk,1*% +%TO.N,SW_FAN*% +X168191650Y-63823100D03* +%TO.P,Dbk,2*% +%TO.N,GND*% +X168191650Y-67823100D03* +%TD*% +D16* +%TO.P,P6,1,Pin_1_1*% +%TO.N,/5V_FAN*% +X210191650Y-61823100D03* +D17* +%TO.P,P6,2,Pin_2_2*% +%TO.N,/FAN_RET*% +X210191650Y-59323100D03* +%TO.P,P6,3,Pin_3_3*% +%TO.N,GND*% +X210191650Y-56823100D03* +%TO.P,P6,4,Pin_4_4*% +%TO.N,FAN_TACH_RAW*% +X210191650Y-54323100D03* +%TD*% +D11* +%TO.P,Ren2,1*% +%TO.N,/EN_FAN*% +X177366650Y-59323100D03* +%TO.P,Ren2,2*% +%TO.N,GND*% +X179016650Y-59323100D03* +%TD*% +D18* +%TO.P,DB2,1,K_1*% +%TO.N,GND*% +X197316650Y-44323100D03* +%TO.P,DB2,2,A_2*% +%TO.N,/BLED2*% +X199191650Y-44323100D03* +%TD*% +D19* +%TO.P,P4,1,Pin_1_1*% +%TO.N,/BAT_PLUS*% +X210191650Y-108323100D03* +D17* +%TO.P,P4,2,Pin_2_2*% +%TO.N,GND*% +X210191650Y-105823100D03* +%TO.P,P4,3,Pin_3_3*% +%TO.N,/NTC*% +X210191650Y-103323100D03* +%TD*% +D20* +%TO.P,P10,1,Pin_1_1*% +%TO.N,/NRST*% +X210166650Y-80073100D03* +D21* +%TO.P,P10,2,Pin_2_2*% +%TO.N,GND*% +X210166650Y-77573100D03* +%TD*% +D22* +%TO.P,Ccomp,1*% +%TO.N,CC_FAN*% +X175841650Y-52698100D03* +%TO.P,Ccomp,2*% +%TO.N,GND*% +X175841650Y-54248100D03* +%TD*% +D23* +%TO.P,U7,1,SW_1*% +%TO.N,/SW3_NODE*% +X200096650Y-114478100D03* +%TO.P,U7,2,EN_2*% +%TO.N,/SW_5V*% +X200096650Y-113208100D03* +%TO.P,U7,3,COMP_3*% +%TO.N,/COMP3*% +X200096650Y-111938100D03* +%TO.P,U7,4,FB_4*% +%TO.N,/FB3*% +X200096650Y-110668100D03* +%TO.P,U7,5,GND_5*% +%TO.N,GND*% +X195146650Y-110668100D03* +%TO.P,U7,6,FREQ_6*% +%TO.N,/FREQ3*% +X195146650Y-111938100D03* +%TO.P,U7,7,VIN_7*% +%TO.N,/SW_5V*% +X195146650Y-113208100D03* +%TO.P,U7,8,BST_8*% +%TO.N,/BST3*% +X195146650Y-114478100D03* +D24* +%TO.P,U7,9*% +%TO.N,GND*% +X197621650Y-112573100D03* +%TD*% +D18* +%TO.P,DB1,1,K_1*% +%TO.N,GND*% +X193316650Y-44323100D03* +%TO.P,DB1,2,A_2*% +%TO.N,/BLED1*% +X195191650Y-44323100D03* +%TD*% +D25* +%TO.P,J1,1,Pin_1_1*% +%TO.N,unconnected-(J1-Pin_1-Pad1)*% +X107191650Y-56323100D03* +D26* +%TO.P,J1,2,Pin_2_2*% +%TO.N,unconnected-(J1-Pin_2-Pad2)*% +X109731650Y-56323100D03* +%TO.P,J1,3,Pin_3_3*% +%TO.N,unconnected-(J1-Pin_3-Pad3)*% +X112271650Y-56323100D03* +%TO.P,J1,4,Pin_4_4*% +%TO.N,unconnected-(J1-Pin_4-Pad4)*% +X114811650Y-56323100D03* +%TO.P,J1,5,Pin_5_5*% +%TO.N,/NRST*% +X117351650Y-56323100D03* +%TO.P,J1,6,Pin_6_6*% +%TO.N,/BAT_SENSE*% +X119891650Y-56323100D03* +%TO.P,J1,7,Pin_7_7*% +%TO.N,/PWR_CTRL*% +X122431650Y-56323100D03* +%TO.P,J1,8,Pin_8_8*% +%TO.N,/GNSS_TX*% +X124971650Y-56323100D03* +%TO.P,J1,9,Pin_9_9*% +%TO.N,/GNSS_RX*% +X127511650Y-56323100D03* +%TO.P,J1,10,Pin_10_10*% +%TO.N,/5V_SENSE*% +X130051650Y-56323100D03* +%TO.P,J1,11,Pin_11_11*% +%TO.N,IGN_SENSE*% +X132591650Y-56323100D03* +%TO.P,J1,12,Pin_12_12*% +%TO.N,FAN_PWM*% +X135131650Y-56323100D03* +%TO.P,J1,13,Pin_13_13*% +%TO.N,unconnected-(J1-Pin_13-Pad13)*% +X137671650Y-56323100D03* +%TO.P,J1,14,Pin_14_14*% +%TO.N,EXT_LED*% +X140211650Y-56323100D03* +%TO.P,J1,15,Pin_15_15*% +%TO.N,/NTC_TEMP*% +X142751650Y-56323100D03* +%TO.P,J1,16,Pin_16_16*% +%TO.N,unconnected-(J1-Pin_16-Pad16)*% +X145291650Y-56323100D03* +%TO.P,J1,17,Pin_17_17*% +%TO.N,FAN_TACH*% +X147831650Y-56323100D03* +%TO.P,J1,18,Pin_18_18*% +%TO.N,3V3*% +X150371650Y-56323100D03* +%TO.P,J1,19,Pin_19_19*% +%TO.N,GND*% +X152911650Y-56323100D03* +%TO.P,J1,20,Pin_20_20*% +%TO.N,/SYS5V*% +X155451650Y-56323100D03* +%TD*% +D27* +%TO.P,Ccomp2,1*% +%TO.N,/COMP3_C*% +X187191650Y-114823100D03* +%TO.P,Ccomp2,2*% +%TO.N,GND*% +X188741650Y-114823100D03* +%TD*% +D11* +%TO.P,R5,1*% +%TO.N,/BAT_PLUS*% +X91416650Y-112323100D03* +%TO.P,R5,2*% +%TO.N,/BAT_SENSE*% +X93066650Y-112323100D03* +%TD*% +D28* +%TO.P,P11,1,Pin_1_1*% +%TO.N,/MAIN5V*% +X135791650Y-46323100D03* +D29* +%TO.P,P11,2,Pin_2_2*% +%TO.N,/SYS5V*% +X138291650Y-46323100D03* +%TD*% +D30* +%TO.P,Q1,1*% +%TO.N,/GATE_LS*% +X137712500Y-59950000D03* +%TO.P,Q1,2*% +%TO.N,/SW_IN*% +X137712500Y-61850000D03* +%TO.P,Q1,3*% +%TO.N,/SW_5V*% +X139587500Y-60900000D03* +%TD*% +D11* +%TO.P,Rg,1*% +%TO.N,FAN_PWM*% +X93366650Y-94323100D03* +%TO.P,Rg,2*% +%TO.N,FAN_GATE*% +X95016650Y-94323100D03* +%TD*% +D31* +%TO.P,Q7,1,S_1*% +%TO.N,/MAIN5V*% +X110241650Y-85323100D03* +%TO.P,Q7,2,S_2*% +X110241650Y-86593100D03* +%TO.P,Q7,3,S_3*% +X110241650Y-87863100D03* +%TO.P,Q7,4,G_4*% +%TO.N,/IGATE*% +X110241650Y-89133100D03* +%TO.P,Q7,5,D_5*% +%TO.N,/VIN_SW*% +X115191650Y-89133100D03* +%TO.P,Q7,6,D_6*% +X115191650Y-87863100D03* +%TO.P,Q7,7,D_7*% +X115191650Y-86593100D03* +%TO.P,Q7,8,D_8*% +X115191650Y-85323100D03* +%TD*% +D32* +%TO.P,C34,1*% +%TO.N,/MAIN5V*% +X130041650Y-104323100D03* +%TO.P,C34,2*% +%TO.N,GND*% +X131941650Y-104323100D03* +%TD*% +D11* +%TO.P,R31,1*% +%TO.N,3V3*% +X128091650Y-112323100D03* +%TO.P,R31,2*% +%TO.N,/I2C_SDA*% +X129741650Y-112323100D03* +%TD*% +%TO.P,Rfreq2,1*% +%TO.N,/FREQ3*% +X178691650Y-111823100D03* +%TO.P,Rfreq2,2*% +%TO.N,GND*% +X180341650Y-111823100D03* +%TD*% +%TO.P,Rmled,1*% +%TO.N,/MODEM_LED*% +X202225000Y-84450000D03* +%TO.P,Rmled,2*% +%TO.N,/MODEM_LED_A*% +X203875000Y-84450000D03* +%TD*% +D33* +%TO.P,U3,1,SDA_1*% +%TO.N,/I2C_SDA*% +X123491650Y-117923100D03* +%TO.P,U3,2,SCL_2*% +%TO.N,/I2C_SCL*% +X123491650Y-118723100D03* +%TO.P,U3,3,VDD_3*% +%TO.N,3V3*% +X124891650Y-118723100D03* +%TO.P,U3,4,VSS_4*% +%TO.N,GND*% +X124891650Y-117923100D03* +%TD*% +D34* +%TO.P,C40,1*% +%TO.N,/SW_5V*% +X179691650Y-95373100D03* +%TO.P,C40,2*% +%TO.N,GND*% +X179691650Y-97273100D03* +%TD*% +D35* +%TO.P,J7,1,Pin_1_1*% +%TO.N,/3V3_MODEM*% +X174191650Y-74823100D03* +D36* +%TO.P,J7,2,Pin_2_2*% +%TO.N,/DOUT_4G*% +X174191650Y-76823100D03* +%TO.P,J7,3,Pin_3_3*% +%TO.N,/DIN_4G*% +X174191650Y-78823100D03* +%TO.P,J7,4,Pin_4_4*% +%TO.N,GND*% +X174191650Y-80823100D03* +%TO.P,J7,5,Pin_5_5*% +%TO.N,/MODEM_RST*% +X174191650Y-82823100D03* +%TO.P,J7,6,Pin_6_6*% +%TO.N,/USB_VBUS*% +X174191650Y-84823100D03* +%TO.P,J7,7,Pin_7_7*% +%TO.N,/USB_DP*% +X174191650Y-86823100D03* +%TO.P,J7,8,Pin_8_8*% +%TO.N,/USB_DM*% +X174191650Y-88823100D03* +%TO.P,J7,9,Pin_9_9*% +%TO.N,unconnected-(J7-Pin_9-Pad9)*% +X174191650Y-90823100D03* +%TO.P,J7,10,Pin_10_10*% +%TO.N,GND*% +X174191650Y-92823100D03* +%TD*% +D37* +%TO.P,D2,1,K_1*% +%TO.N,/5V_FAN*% +X92191650Y-98323100D03* +%TO.P,D2,2,A_2*% +%TO.N,/FAN_RET*% +X96191650Y-98323100D03* +%TD*% +D38* +%TO.P,RS1,1*% +%TO.N,/VEH5V*% +X98729150Y-88323100D03* +%TO.P,RS1,2*% +%TO.N,/VIN_SW*% +X101654150Y-88323100D03* +%TD*% +D27* +%TO.P,Cu3,1*% +%TO.N,3V3*% +X132141650Y-112323100D03* +%TO.P,Cu3,2*% +%TO.N,GND*% +X133691650Y-112323100D03* +%TD*% +D11* +%TO.P,R3,1*% +%TO.N,3V3*% +X97041650Y-107323100D03* +%TO.P,R3,2*% +%TO.N,/LED_A*% +X98691650Y-107323100D03* +%TD*% +%TO.P,R60,1*% +%TO.N,/3V3_MODEM*% +X178691650Y-102323100D03* +%TO.P,R60,2*% +%TO.N,/FB3*% +X180341650Y-102323100D03* +%TD*% +%TO.P,Rdfu,1*% +%TO.N,USART1_RX*% +X110091650Y-112323100D03* +%TO.P,Rdfu,2*% +%TO.N,3V3*% +X111741650Y-112323100D03* +%TD*% +D39* +%TO.P,D10,1,A1_1*% +%TO.N,/24V_IN*% +X89041650Y-61823100D03* +%TO.P,D10,2,A2_2*% +%TO.N,GND*% +X93341650Y-61823100D03* +%TD*% +D40* +%TO.P,Rcomp,1*% +%TO.N,COMP_FAN*% +X175841650Y-47798100D03* +%TO.P,Rcomp,2*% +%TO.N,CC_FAN*% +X175841650Y-49448100D03* +%TD*% +D30* +%TO.P,Q5,1,B_1*% +%TO.N,/BASE_LS*% +X144512500Y-59250000D03* +%TO.P,Q5,2,C_2*% +%TO.N,/GATE_LS*% +X144512500Y-61150000D03* +%TO.P,Q5,3,E_3*% +%TO.N,GND*% +X146387500Y-60200000D03* +%TD*% +D27* +%TO.P,C7,1*% +%TO.N,/5V_SENSE*% +X95416650Y-116323100D03* +%TO.P,C7,2*% +%TO.N,GND*% +X96966650Y-116323100D03* +%TD*% +D28* +%TO.P,P2,1,Pin_1_1*% +%TO.N,/VEH5V*% +X127191650Y-46323100D03* +D29* +%TO.P,P2,2,Pin_2_2*% +%TO.N,GND*% +X129691650Y-46323100D03* +%TD*% +D11* +%TO.P,R20,1*% +%TO.N,/5V_FAN*% +X173041650Y-45323100D03* +%TO.P,R20,2*% +%TO.N,/FB_FAN*% +X174691650Y-45323100D03* +%TD*% +D27* +%TO.P,Cbst2,1*% +%TO.N,/BST3*% +X187141650Y-109823100D03* +%TO.P,Cbst2,2*% +%TO.N,/SW3_NODE*% +X188691650Y-109823100D03* +%TD*% +D11* +%TO.P,Rts,1*% +%TO.N,FAN_TACH_RAW*% +X96041650Y-102323100D03* +%TO.P,Rts,2*% +%TO.N,FAN_TACH*% +X97691650Y-102323100D03* +%TD*% +D30* +%TO.P,Q2,1*% +%TO.N,FAN_GATE*% +X105254150Y-95373100D03* +%TO.P,Q2,2*% +%TO.N,GND*% +X105254150Y-97273100D03* +%TO.P,Q2,3*% +%TO.N,/FAN_RET*% +X107129150Y-96323100D03* +%TD*% +D27* +%TO.P,Cbst,1*% +%TO.N,BST_FAN*% +X167641650Y-45323100D03* +%TO.P,Cbst,2*% +%TO.N,SW_FAN*% +X169191650Y-45323100D03* +%TD*% +D25* +%TO.P,H3,1,Pin_1_1*% +%TO.N,/USART1_TX*% +X111191650Y-46323100D03* +D26* +%TO.P,H3,2,Pin_2_2*% +%TO.N,USART1_RX*% +X111191650Y-48863100D03* +%TO.P,H3,3,Pin_3_3*% +%TO.N,GND*% +X111191650Y-51403100D03* +%TD*% +D41* +%TO.P,L6,1,1_1*% +%TO.N,/SW_BAT*% +X163791650Y-104823100D03* +%TO.P,L6,2,2_2*% +%TO.N,/BAT_PLUS*% +X171591650Y-104823100D03* +%TD*% +D32* +%TO.P,C35,1*% +%TO.N,/BAT_PLUS*% +X129241650Y-96323100D03* +%TO.P,C35,2*% +%TO.N,GND*% +X131141650Y-96323100D03* +%TD*% +D42* +%TO.P,U4,1,SCL_1*% +%TO.N,/I2C_SCL*% +X129599150Y-117173100D03* +%TO.P,U4,2,GND_2*% +%TO.N,GND*% +X129599150Y-117673100D03* +%TO.P,U4,3,ALERT_3*% +%TO.N,unconnected-(U4-ALERT-Pad3)*% +X129599150Y-118173100D03* +%TO.P,U4,4,ADD0_4*% +%TO.N,GND*% +X131024150Y-118173100D03* +%TO.P,U4,5,V+_5*% +%TO.N,3V3*% +X131024150Y-117673100D03* +%TO.P,U4,6,SDA_6*% +%TO.N,/I2C_SDA*% +X131024150Y-117173100D03* +%TD*% +D11* +%TO.P,RB3,1*% +%TO.N,/BATLED3*% +X201429150Y-48323100D03* +%TO.P,RB3,2*% +%TO.N,/BLED3*% +X203079150Y-48323100D03* +%TD*% +D43* +%TO.P,TP1,1,1_1*% +%TO.N,/CLPROG_TP*% +X113191650Y-107323100D03* +%TD*% +D41* +%TO.P,L2,1,1_1*% +%TO.N,SW_FAN*% +X183391650Y-47823100D03* +%TO.P,L2,2,2_2*% +%TO.N,/5V_FAN*% +X191191650Y-47823100D03* +%TD*% +D27* +%TO.P,C9,1*% +%TO.N,IGN_SENSE*% +X100816650Y-83323100D03* +%TO.P,C9,2*% +%TO.N,GND*% +X102366650Y-83323100D03* +%TD*% +D44* +%TO.P,SW4G,1,1_1*% +%TO.N,/MODEM_RST*% +X144300000Y-135600000D03* +%TO.P,SW4G,2,2_2*% +%TO.N,GND*% +X152050000Y-135600000D03* +%TD*% +D35* +%TO.P,J8,1,Pin_1_1*% +%TO.N,GND*% +X196541650Y-74823100D03* +D36* +%TO.P,J8,2,Pin_2_2*% +%TO.N,unconnected-(J8-Pin_2-Pad2)*% +X196541650Y-76823100D03* +%TO.P,J8,3,Pin_3_3*% +%TO.N,unconnected-(J8-Pin_3-Pad3)*% +X196541650Y-78823100D03* +%TO.P,J8,4,Pin_4_4*% +%TO.N,unconnected-(J8-Pin_4-Pad4)*% +X196541650Y-80823100D03* +%TO.P,J8,5,Pin_5_5*% +%TO.N,unconnected-(J8-Pin_5-Pad5)*% +X196541650Y-82823100D03* +%TO.P,J8,6,Pin_6_6*% +%TO.N,GND*% +X196541650Y-84823100D03* +%TO.P,J8,7,Pin_7_7*% +%TO.N,/3V3_MODEM*% +X196541650Y-86823100D03* +%TO.P,J8,8,Pin_8_8*% +%TO.N,/MODEM_LED*% +X196541650Y-88823100D03* +%TO.P,J8,9,Pin_9_9*% +%TO.N,unconnected-(J8-Pin_9-Pad9)*% +X196541650Y-90823100D03* +%TO.P,J8,10,Pin_10_10*% +%TO.N,GND*% +X196541650Y-92823100D03* +%TD*% +D23* +%TO.P,U2,1,SW_1*% +%TO.N,SW_FAN*% +X171691650Y-54633100D03* +%TO.P,U2,2,EN_2*% +%TO.N,/EN_FAN*% +X171691650Y-53363100D03* +%TO.P,U2,3,COMP_3*% +%TO.N,COMP_FAN*% +X171691650Y-52093100D03* +%TO.P,U2,4,FB_4*% +%TO.N,/FB_FAN*% +X171691650Y-50823100D03* +%TO.P,U2,5,GND_5*% +%TO.N,GND*% +X166741650Y-50823100D03* +%TO.P,U2,6,FREQ_6*% +%TO.N,FREQ_FAN*% +X166741650Y-52093100D03* +%TO.P,U2,7,VIN_7*% +%TO.N,24V*% +X166741650Y-53363100D03* +%TO.P,U2,8,BST_8*% +%TO.N,BST_FAN*% +X166741650Y-54633100D03* +D24* +%TO.P,U2,9*% +%TO.N,GND*% +X169216650Y-52728100D03* +%TD*% +D11* +%TO.P,RB4,1*% +%TO.N,/BATLED4*% +X205429150Y-48323100D03* +%TO.P,RB4,2*% +%TO.N,/BLED4*% +X207079150Y-48323100D03* +%TD*% +D45* +%TO.P,C22,1*% +%TO.N,24V*% +X161691650Y-46773100D03* +%TO.P,C22,2*% +%TO.N,GND*% +X161691650Y-43823100D03* +%TD*% +D11* +%TO.P,R61,1*% +%TO.N,/FB3*% +X178691650Y-107323100D03* +%TO.P,R61,2*% +%TO.N,GND*% +X180341650Y-107323100D03* +%TD*% +D46* +%TO.P,Rcc1,1*% +%TO.N,/USB_CC1*% +X161425000Y-125575000D03* +%TO.P,Rcc1,2*% +%TO.N,GND*% +X161425000Y-123925000D03* +%TD*% +D11* +%TO.P,R1,1*% +%TO.N,/PWR_CTRL*% +X163041650Y-59323100D03* +%TO.P,R1,2*% +%TO.N,/BASE_LS*% +X164691650Y-59323100D03* +%TD*% +D12* +%TO.P,P5,1,Pin_1_1*% +%TO.N,3V3*% +X98191650Y-46323100D03* +D13* +%TO.P,P5,2,Pin_2_2*% +%TO.N,GND*% +X100691650Y-46323100D03* +%TO.P,P5,3,Pin_3_3*% +%TO.N,/I2C_SDA*% +X103191650Y-46323100D03* +%TO.P,P5,4,Pin_4_4*% +%TO.N,/I2C_SCL*% +X105691650Y-46323100D03* +%TD*% +D18* +%TO.P,DB3,1,K_1*% +%TO.N,GND*% +X201316650Y-44323100D03* +%TO.P,DB3,2,A_2*% +%TO.N,/BLED3*% +X203191650Y-44323100D03* +%TD*% +D34* +%TO.P,C41,1*% +%TO.N,/3V3_MODEM*% +X198691650Y-102323100D03* +%TO.P,C41,2*% +%TO.N,GND*% +X198691650Y-104223100D03* +%TD*% +D11* +%TO.P,R55,1*% +%TO.N,/VEH5V*% +X101041650Y-107323100D03* +%TO.P,R55,2*% +%TO.N,/NTC*% +X102691650Y-107323100D03* +%TD*% +%TO.P,Rled,1*% +%TO.N,EXT_LED*% +X94591650Y-112323100D03* +%TO.P,Rled,2*% +%TO.N,GND*% +X96241650Y-112323100D03* +%TD*% +D47* +%TO.P,JP4,1,A_1*% +%TO.N,/MAIN5V*% +X140091650Y-99823100D03* +D48* +%TO.P,JP4,2,C_2*% +%TO.N,/F0_SEL*% +X141391650Y-99823100D03* +D49* +%TO.P,JP4,3,B_3*% +%TO.N,GND*% +X142691650Y-99823100D03* +%TD*% +D11* +%TO.P,Rgs,1*% +%TO.N,FAN_GATE*% +X98366650Y-94323100D03* +%TO.P,Rgs,2*% +%TO.N,GND*% +X100016650Y-94323100D03* +%TD*% +D20* +%TO.P,P8,1,Pin_1_1*% +%TO.N,/LED_A*% +X210166650Y-70823100D03* +D21* +%TO.P,P8,2,Pin_2_2*% +%TO.N,/LED_K*% +X210166650Y-68323100D03* +%TD*% +D11* +%TO.P,R41,1*% +%TO.N,/Q6_BASE*% +X177366650Y-64823100D03* +%TO.P,R41,2*% +%TO.N,GND*% +X179016650Y-64823100D03* +%TD*% +D18* +%TO.P,DB4,1,K_1*% +%TO.N,GND*% +X205316650Y-44323100D03* +%TO.P,DB4,2,A_2*% +%TO.N,/BLED4*% +X207191650Y-44323100D03* +%TD*% +D11* +%TO.P,RB2,1*% +%TO.N,/BATLED2*% +X197429150Y-48323100D03* +%TO.P,RB2,2*% +%TO.N,/BLED2*% +X199079150Y-48323100D03* +%TD*% +D46* +%TO.P,Rcc2,1*% +%TO.N,/USB_CC2*% +X165400000Y-125575000D03* +%TO.P,Rcc2,2*% +%TO.N,GND*% +X165400000Y-123925000D03* +%TD*% +D18* +%TO.P,D1,1,K_1*% +%TO.N,/LED_K*% +X99254150Y-116323100D03* +%TO.P,D1,2,A_2*% +%TO.N,/LED_A*% +X101129150Y-116323100D03* +%TD*% +D11* +%TO.P,Rtp,1*% +%TO.N,3V3*% +X100041650Y-102323100D03* +%TO.P,Rtp,2*% +%TO.N,FAN_TACH*% +X101691650Y-102323100D03* +%TD*% +D50* +%TO.P,JP1,1,A_1*% +%TO.N,/5V_FAN*% +X164891650Y-80323100D03* +D51* +%TO.P,JP1,2,B_2*% +%TO.N,/VEH5V*% +X166191650Y-80323100D03* +%TD*% +D11* +%TO.P,R30,1*% +%TO.N,3V3*% +X124091650Y-112323100D03* +%TO.P,R30,2*% +%TO.N,/I2C_SCL*% +X125741650Y-112323100D03* +%TD*% +%TO.P,R6,1*% +%TO.N,/BAT_SENSE*% +X97916650Y-112323100D03* +%TO.P,R6,2*% +%TO.N,GND*% +X99566650Y-112323100D03* +%TD*% +D52* +%TO.P,P12,1,Pin_1_1*% +%TO.N,/NTC_TEMP*% +X210191650Y-121323100D03* +D21* +%TO.P,P12,2,Pin_2_2*% +%TO.N,GND*% +X210191650Y-118823100D03* +%TD*% +D53* +%TO.P,C32,1*% +%TO.N,/MAIN5V*% +X119191650Y-104323100D03* +%TO.P,C32,2*% +%TO.N,GND*% +X122141650Y-104323100D03* +%TD*% +D54* +%TO.P,J9,A1,GND_A1*% +%TO.N,GND*% +X161175000Y-129425000D03* +%TO.P,J9,A4,VBUS_A4*% +%TO.N,/USB_VBUS*% +X162025000Y-129425000D03* +%TO.P,J9,A5,CC1_A5*% +%TO.N,/USB_CC1*% +X162875000Y-129425000D03* +%TO.P,J9,A6,D+_A6*% +%TO.N,/USB_DP*% +X163725000Y-129425000D03* +%TO.P,J9,A7,D-_A7*% +%TO.N,/USB_DM*% +X164575000Y-129425000D03* +%TO.P,J9,A8*% +%TO.N,N/C*% +X165425000Y-129425000D03* +%TO.P,J9,A9,VBUS_A9*% +%TO.N,/USB_VBUS*% +X166275000Y-129425000D03* +%TO.P,J9,A12,GND_A12*% +%TO.N,GND*% +X167125000Y-129425000D03* +%TO.P,J9,B1,GND_B1*% +X167125000Y-130775000D03* +%TO.P,J9,B4,VBUS_B4*% +%TO.N,/USB_VBUS*% +X166275000Y-130775000D03* +%TO.P,J9,B5,CC2_B5*% +%TO.N,/USB_CC2*% +X165425000Y-130775000D03* +%TO.P,J9,B6,D+_B6*% +%TO.N,/USB_DP*% +X164575000Y-130775000D03* +%TO.P,J9,B7,D-_B7*% +%TO.N,/USB_DM*% +X163725000Y-130775000D03* +%TO.P,J9,B8*% +%TO.N,N/C*% +X162875000Y-130775000D03* +%TO.P,J9,B9,VBUS_B9*% +%TO.N,/USB_VBUS*% +X162025000Y-130775000D03* +%TO.P,J9,B12,GND_B12*% +%TO.N,GND*% +X161175000Y-130775000D03* +D55* +%TO.P,J9,SH,SHIELD_SH*% +X159825000Y-130405000D03* +D56* +X159825000Y-133785000D03* +D55* +X168475000Y-130405000D03* +D56* +X168475000Y-133785000D03* +%TD*% +D30* +%TO.P,Q4,1*% +%TO.N,EXT_LED*% +X91816650Y-104873100D03* +%TO.P,Q4,2*% +%TO.N,GND*% +X91816650Y-106773100D03* +%TO.P,Q4,3*% +%TO.N,/LED_K*% +X93691650Y-105823100D03* +%TD*% +D57* +%TO.P,P1,1,Pin_1_1*% +%TO.N,/24V_IN*% +X172691650Y-133823100D03* +D58* +%TO.P,P1,2,Pin_2_2*% +%TO.N,GND*% +X177691650Y-133823100D03* +%TO.P,P1,3,Pin_3_3*% +%TO.N,IGN_IN*% +X182691650Y-133823100D03* +%TO.P,P1,4,Pin_4_4*% +%TO.N,unconnected-(P1-Pin_4-Pad4)*% +X187691650Y-133823100D03* +%TO.P,P1,5,Pin_5_5*% +%TO.N,unconnected-(P1-Pin_5-Pad5)*% +X192691650Y-133823100D03* +%TD*% +D59* +%TO.P,F1,1*% +%TO.N,/SYS5V*% +X145054150Y-46323100D03* +%TO.P,F1,2*% +%TO.N,/SW_IN*% +X149329150Y-46323100D03* +%TD*% +D11* +%TO.P,R52,1*% +%TO.N,/PFI*% +X107541650Y-102323100D03* +%TO.P,R52,2*% +%TO.N,GND*% +X109191650Y-102323100D03* +%TD*% +D60* +%TO.P,K1,1*% +%TO.N,USART1_RX*% +X189284150Y-55865600D03* +D61* +%TO.P,K1,2*% +%TO.N,/SYS5V*% +X189284150Y-58405600D03* +%TO.P,K1,5*% +%TO.N,/DIN_4G*% +X189284150Y-66025600D03* +%TO.P,K1,6*% +X194364150Y-66025600D03* +%TO.P,K1,9*% +%TO.N,/KCOIL*% +X194364150Y-58405600D03* +%TO.P,K1,10*% +%TO.N,/USART1_TX*% +X194364150Y-55865600D03* +%TD*% +D25* +%TO.P,J2,1,Pin_1_1*% +%TO.N,/BATLED1*% +X107191650Y-74103100D03* +D26* +%TO.P,J2,2,Pin_2_2*% +%TO.N,/BATLED2*% +X109731650Y-74103100D03* +%TO.P,J2,3,Pin_3_3*% +%TO.N,/BATLED3*% +X112271650Y-74103100D03* +%TO.P,J2,4,Pin_4_4*% +%TO.N,/BATLED4*% +X114811650Y-74103100D03* +%TO.P,J2,5,Pin_5_5*% +%TO.N,/CHRG_EN*% +X117351650Y-74103100D03* +%TO.P,J2,6,Pin_6_6*% +%TO.N,/USART1_TX*% +X119891650Y-74103100D03* +%TO.P,J2,7,Pin_7_7*% +%TO.N,USART1_RX*% +X122431650Y-74103100D03* +%TO.P,J2,8,Pin_8_8*% +%TO.N,unconnected-(J2-Pin_8-Pad8)*% +X124971650Y-74103100D03* +%TO.P,J2,9,Pin_9_9*% +%TO.N,unconnected-(J2-Pin_9-Pad9)*% +X127511650Y-74103100D03* +%TO.P,J2,10,Pin_10_10*% +%TO.N,unconnected-(J2-Pin_10-Pad10)*% +X130051650Y-74103100D03* +%TO.P,J2,11,Pin_11_11*% +%TO.N,/CHRG_STAT*% +X132591650Y-74103100D03* +%TO.P,J2,12,Pin_12_12*% +%TO.N,/CHRG_FAULT*% +X135131650Y-74103100D03* +%TO.P,J2,13,Pin_13_13*% +%TO.N,/BYP_CTRL*% +X137671650Y-74103100D03* +%TO.P,J2,14,Pin_14_14*% +%TO.N,/I2C_SCL*% +X140211650Y-74103100D03* +%TO.P,J2,15,Pin_15_15*% +%TO.N,/I2C_SDA*% +X142751650Y-74103100D03* +%TO.P,J2,16,Pin_16_16*% +%TO.N,unconnected-(J2-Pin_16-Pad16)*% +X145291650Y-74103100D03* +%TO.P,J2,17,Pin_17_17*% +%TO.N,unconnected-(J2-Pin_17-Pad17)*% +X147831650Y-74103100D03* +%TO.P,J2,18,Pin_18_18*% +%TO.N,/SYS5V*% +X150371650Y-74103100D03* +%TO.P,J2,19,Pin_19_19*% +%TO.N,GND*% +X152911650Y-74103100D03* +%TO.P,J2,20,Pin_20_20*% +%TO.N,3V3*% +X155451650Y-74103100D03* +%TD*% +D11* +%TO.P,R56,1*% +%TO.N,/CHRG_EN*% +X105041650Y-107323100D03* +%TO.P,R56,2*% +%TO.N,GND*% +X106691650Y-107323100D03* +%TD*% +D27* +%TO.P,C11,1*% +%TO.N,24V*% +X161416650Y-51223100D03* +%TO.P,C11,2*% +%TO.N,GND*% +X162966650Y-51223100D03* +%TD*% +D62* +%TO.P,C43,1*% +%TO.N,/3V3_MODEM*% +X182491650Y-122323100D03* +%TO.P,C43,2*% +%TO.N,GND*% +X187891650Y-122323100D03* +%TD*% +D30* +%TO.P,DzG,1*% +%TO.N,Q10_GATE*% +X98254150Y-60373100D03* +%TO.P,DzG,2*% +%TO.N,N/C*% +X98254150Y-62273100D03* +%TO.P,DzG,3*% +%TO.N,24V*% +X100129150Y-61323100D03* +%TD*% +D40* +%TO.P,R40,1*% +%TO.N,/BYP_CTRL*% +X178366650Y-68498100D03* +%TO.P,R40,2*% +%TO.N,/Q6_BASE*% +X178366650Y-70148100D03* +%TD*% +D11* +%TO.P,R42,1*% +%TO.N,3V3*% +X114091650Y-112323100D03* +%TO.P,R42,2*% +%TO.N,/NTC_TEMP*% +X115741650Y-112323100D03* +%TD*% +D63* +%TO.P,U6,1,VSYS_1*% +%TO.N,/MAIN5V*% +X119791650Y-92823100D03* +%TO.P,U6,2,PROG_2*% +%TO.N,/PROG*% +X119791650Y-93323100D03* +%TO.P,U6,3,CLPROG_3*% +%TO.N,/CLPROG_TP*% +X119791650Y-93823100D03* +%TO.P,U6,4,CHGOFF_4*% +%TO.N,/CHRG_EN*% +X119791650Y-94323100D03* +%TO.P,U6,5,BSTOFF_5*% +%TO.N,GND*% +X119791650Y-94823100D03* +%TO.P,U6,6,VIN_6*% +%TO.N,/VEH5V*% +X119791650Y-95323100D03* +%TO.P,U6,7,CLN_7*% +%TO.N,/VIN_SW*% +X119791650Y-95823100D03* +D64* +%TO.P,U6,8,CHRG_8*% +%TO.N,/CHRG_STAT*% +X120741650Y-96773100D03* +%TO.P,U6,9,FAULT_9*% +%TO.N,/CHRG_FAULT*% +X121241650Y-96773100D03* +%TO.P,U6,10,RSTFB_10*% +%TO.N,/VFB_BST*% +X121741650Y-96773100D03* +%TO.P,U6,11,RST_11*% +%TO.N,unconnected-(U6-RST-Pad11)*% +X122241650Y-96773100D03* +%TO.P,U6,12,F2_12*% +%TO.N,/F2_SEL*% +X122741650Y-96773100D03* +D63* +%TO.P,U6,13,F1_13*% +%TO.N,/F1_SEL*% +X123691650Y-95823100D03* +%TO.P,U6,14,F0_14*% +%TO.N,/F0_SEL*% +X123691650Y-95323100D03* +%TO.P,U6,15,IGATE_15*% +%TO.N,/IGATE*% +X123691650Y-94823100D03* +%TO.P,U6,16,OVSNS_16*% +%TO.N,/VEH5V*% +X123691650Y-94323100D03* +%TO.P,U6,17,NTC_17*% +%TO.N,/NTC*% +X123691650Y-93823100D03* +%TO.P,U6,18,BSTFB_18*% +%TO.N,/VFB_BST*% +X123691650Y-93323100D03* +%TO.P,U6,19,PFI_19*% +%TO.N,/PFI*% +X123691650Y-92823100D03* +D64* +%TO.P,U6,20,PFO_20*% +%TO.N,/PFO_TP*% +X122741650Y-91873100D03* +%TO.P,U6,21,SW_21*% +%TO.N,/SW_BAT*% +X122241650Y-91873100D03* +%TO.P,U6,22,SW_22*% +X121741650Y-91873100D03* +%TO.P,U6,23,BAT_23*% +%TO.N,/BAT_PLUS*% +X121241650Y-91873100D03* +%TO.P,U6,24,VSYS_24*% +%TO.N,/MAIN5V*% +X120741650Y-91873100D03* +D65* +%TO.P,U6,25,GND_EP_25*% +%TO.N,GND*% +X121741650Y-94323100D03* +%TD*% +D47* +%TO.P,JP3,1,A_1*% +%TO.N,GND*% +X140091650Y-94823100D03* +D48* +%TO.P,JP3,2,C_2*% +%TO.N,/F1_SEL*% +X141391650Y-94823100D03* +D49* +%TO.P,JP3,3,B_3*% +%TO.N,/MAIN5V*% +X142691650Y-94823100D03* +%TD*% +D66* +%TO.P,Q10,1*% +%TO.N,Q10_GATE*% +X85151650Y-52043100D03* +D67* +%TO.P,Q10,2*% +%TO.N,/24V_IN*% +X91451650Y-54323100D03* +D66* +%TO.P,Q10,3*% +%TO.N,24V*% +X85151650Y-56603100D03* +%TD*% +D11* +%TO.P,R53,1*% +%TO.N,/MAIN5V*% +X134041650Y-91323100D03* +%TO.P,R53,2*% +%TO.N,/VFB_BST*% +X135691650Y-91323100D03* +%TD*% +%TO.P,R51,1*% +%TO.N,/VEH5V*% +X104041650Y-102323100D03* +%TO.P,R51,2*% +%TO.N,/PFI*% +X105691650Y-102323100D03* +%TD*% +D62* +%TO.P,C10,1*% +%TO.N,24V*% +X86991650Y-71823100D03* +%TO.P,C10,2*% +%TO.N,GND*% +X92391650Y-71823100D03* +%TD*% +D11* +%TO.P,Rcomp2,1*% +%TO.N,/COMP3*% +X178866650Y-116323100D03* +%TO.P,Rcomp2,2*% +%TO.N,/COMP3_C*% +X180516650Y-116323100D03* +%TD*% +D61* +%TO.P,SW1,1,1_1*% +%TO.N,/NRST*% +X199191650Y-133323100D03* +X205691650Y-133323100D03* +%TO.P,SW1,2,2_2*% +%TO.N,GND*% +X199191650Y-137823100D03* +X205691650Y-137823100D03* +%TD*% +D11* +%TO.P,R58,1*% +%TO.N,3V3*% +X134166650Y-104323100D03* +%TO.P,R58,2*% +%TO.N,/CHRG_FAULT*% +X135816650Y-104323100D03* +%TD*% +%TO.P,Rrp,1*% +%TO.N,Q10_GATE*% +X84366650Y-61323100D03* +%TO.P,Rrp,2*% +%TO.N,GND*% +X86016650Y-61323100D03* +%TD*% +D30* +%TO.P,Q6,1,B_1*% +%TO.N,/Q6_BASE*% +X182254150Y-62373100D03* +%TO.P,Q6,2,C_2*% +%TO.N,/KCOIL*% +X182254150Y-64273100D03* +%TO.P,Q6,3,E_3*% +%TO.N,GND*% +X184129150Y-63323100D03* +%TD*% +D27* +%TO.P,C31,1*% +%TO.N,/VEH5V*% +X111641650Y-97323100D03* +%TO.P,C31,2*% +%TO.N,GND*% +X113191650Y-97323100D03* +%TD*% +D11* +%TO.P,R21,1*% +%TO.N,/FB_FAN*% +X176266650Y-45323100D03* +%TO.P,R21,2*% +%TO.N,GND*% +X177916650Y-45323100D03* +%TD*% +D32* +%TO.P,C30,1*% +%TO.N,/VEH5V*% +X99241650Y-98323100D03* +%TO.P,C30,2*% +%TO.N,GND*% +X101141650Y-98323100D03* +%TD*% +D11* +%TO.P,R7,1*% +%TO.N,/VEH5V*% +X102091650Y-112323100D03* +%TO.P,R7,2*% +%TO.N,/5V_SENSE*% +X103741650Y-112323100D03* +%TD*% +D68* +%TO.P,C3,1*% +%TO.N,/SW_5V*% +X154691650Y-51223100D03* +%TO.P,C3,2*% +%TO.N,GND*% +X154691650Y-45823100D03* +%TD*% +D69* +%TO.P,D5,1,K_1*% +%TO.N,3V3*% +X93541650Y-83323100D03* +%TO.P,D5,2,A_2*% +%TO.N,IGN_SENSE*% +X96841650Y-83323100D03* +%TD*% +D53* +%TO.P,C33,1*% +%TO.N,/MAIN5V*% +X124691650Y-104323100D03* +%TO.P,C33,2*% +%TO.N,GND*% +X127641650Y-104323100D03* +%TD*% +D46* +%TO.P,Rfreq,1*% +%TO.N,FREQ_FAN*% +X161135950Y-56380200D03* +%TO.P,Rfreq,2*% +%TO.N,GND*% +X161135950Y-54730200D03* +%TD*% +D19* +%TO.P,P3,1,Pin_1_1*% +%TO.N,/SW_5V*% +X210191650Y-95323100D03* +D17* +%TO.P,P3,2,Pin_2_2*% +%TO.N,GND*% +X210191650Y-92823100D03* +%TO.P,P3,3,Pin_3_3*% +%TO.N,/GNSS_TX*% +X210191650Y-90323100D03* +%TO.P,P3,4,Pin_4_4*% +%TO.N,/GNSS_RX*% +X210191650Y-87823100D03* +%TD*% +D14* +%TO.P,Rig,1*% +%TO.N,IGN_IN*% +X102191650Y-69323100D03* +%TO.P,Rig,2*% +%TO.N,IGN_SENSE*% +X100541650Y-69323100D03* +%TD*% +D11* +%TO.P,RB1,1*% +%TO.N,/BATLED1*% +X193429150Y-48323100D03* +%TO.P,RB1,2*% +%TO.N,/BLED1*% +X195079150Y-48323100D03* +%TD*% +%TO.P,Ren1,1*% +%TO.N,24V*% +X173366650Y-59323100D03* +%TO.P,Ren1,2*% +%TO.N,/EN_FAN*% +X175016650Y-59323100D03* +%TD*% +D27* +%TO.P,C5,1*% +%TO.N,/BAT_SENSE*% +X91416650Y-116323100D03* +%TO.P,C5,2*% +%TO.N,GND*% +X92966650Y-116323100D03* +%TD*% +D11* +%TO.P,R8,1*% +%TO.N,/5V_SENSE*% +X106091650Y-112323100D03* +%TO.P,R8,2*% +%TO.N,GND*% +X107741650Y-112323100D03* +%TD*% +D27* +%TO.P,C24,1*% +%TO.N,/NTC_TEMP*% +X118141650Y-112323100D03* +%TO.P,C24,2*% +%TO.N,GND*% +X119691650Y-112323100D03* +%TD*% +D11* +%TO.P,R54,1*% +%TO.N,/VFB_BST*% +X134041650Y-95323100D03* +%TO.P,R54,2*% +%TO.N,GND*% +X135691650Y-95323100D03* +%TD*% +%TO.P,R57,1*% +%TO.N,3V3*% +X134041650Y-99823100D03* +%TO.P,R57,2*% +%TO.N,/CHRG_STAT*% +X135691650Y-99823100D03* +%TD*% +%TO.P,R50,1*% +%TO.N,/PROG*% +X111541650Y-102323100D03* +%TO.P,R50,2*% +%TO.N,GND*% +X113191650Y-102323100D03* +%TD*% +D37* +%TO.P,Dbk2,1,K_1*% +%TO.N,/SW3_NODE*% +X186491650Y-103823100D03* +%TO.P,Dbk2,2,A_2*% +%TO.N,GND*% +X190491650Y-103823100D03* +%TD*% +D43* +%TO.P,TP2,1,1_1*% +%TO.N,/PFO_TP*% +X127691650Y-87323100D03* +%TD*% +D27* +%TO.P,Cu4,1*% +%TO.N,3V3*% +X136141650Y-112323100D03* +%TO.P,Cu4,2*% +%TO.N,GND*% +X137691650Y-112323100D03* +%TD*% +D32* +%TO.P,C23,1*% +%TO.N,/5V_FAN*% +X178791650Y-51223100D03* +%TO.P,C23,2*% +%TO.N,GND*% +X180691650Y-51223100D03* +%TD*% +D47* +%TO.P,JP2,1,A_1*% +%TO.N,/MAIN5V*% +X140091650Y-90323100D03* +D48* +%TO.P,JP2,2,C_2*% +%TO.N,/F2_SEL*% +X141391650Y-90323100D03* +D49* +%TO.P,JP2,3,B_3*% +%TO.N,GND*% +X142691650Y-90323100D03* +%TD*% +D70* +%TO.P,D6,1,K_1*% +%TO.N,/SYS5V*% +X201341650Y-61823100D03* +%TO.P,D6,2,A_2*% +%TO.N,/KCOIL*% +X198041650Y-61823100D03* +%TD*% +D18* +%TO.P,D4G,1,K_1*% +%TO.N,GND*% +X202162500Y-92100000D03* +%TO.P,D4G,2,A_2*% +%TO.N,/MODEM_LED_A*% +X204037500Y-92100000D03* +%TD*% +D41* +%TO.P,L7,1,1_1*% +%TO.N,/SW3_NODE*% +X163791650Y-118323100D03* +%TO.P,L7,2,2_2*% +%TO.N,/3V3_MODEM*% +X171591650Y-118323100D03* +%TD*% +D71* +%TO.P,MOD1,1,NC_1*% +%TO.N,unconnected-(MOD1-NC-Pad1)*% +X115251650Y-129583100D03* +D72* +%TO.P,MOD1,2,IOREF_2*% +%TO.N,3V3*% +X117791650Y-129583100D03* +%TO.P,MOD1,3,RESET_3*% +%TO.N,unconnected-(MOD1-RESET-Pad3)*% +X120331650Y-129583100D03* +%TO.P,MOD1,4,3V3_OUT_4*% +%TO.N,unconnected-(MOD1-3V3_OUT-Pad4)*% +X122871650Y-129583100D03* +%TO.P,MOD1,5,5V_5*% +%TO.N,/SW_5V*% +X125411650Y-129583100D03* +%TO.P,MOD1,6,GND_6*% +%TO.N,GND*% +X127951650Y-129583100D03* +%TO.P,MOD1,7,GND_7*% +X130491650Y-129583100D03* +%TO.P,MOD1,8,VIN_8*% +%TO.N,unconnected-(MOD1-VIN-Pad8)*% +X133031650Y-129583100D03* +%TO.P,MOD1,9,A0_9*% +%TO.N,unconnected-(MOD1-A0-Pad9)*% +X138111650Y-129583100D03* +%TO.P,MOD1,10,A1_10*% +%TO.N,unconnected-(MOD1-A1-Pad10)*% +X140651650Y-129583100D03* +%TO.P,MOD1,11,A2_11*% +%TO.N,unconnected-(MOD1-A2-Pad11)*% +X143191650Y-129583100D03* +%TO.P,MOD1,12,A3_12*% +%TO.N,unconnected-(MOD1-A3-Pad12)*% +X145731650Y-129583100D03* +%TO.P,MOD1,13,A4_13*% +%TO.N,unconnected-(MOD1-A4-Pad13)*% +X148271650Y-129583100D03* +%TO.P,MOD1,14,A5_14*% +%TO.N,unconnected-(MOD1-A5-Pad14)*% +X150811650Y-129583100D03* +%TO.P,MOD1,15,TX1_D0_15*% +%TO.N,/GNSS_RX*% +X150811650Y-81323100D03* +%TO.P,MOD1,16,RX1_D1_16*% +%TO.N,/GNSS_TX*% +X148271650Y-81323100D03* +%TO.P,MOD1,17,RX2_D2_17*% +%TO.N,/DOUT_4G*% +X145731650Y-81323100D03* +%TO.P,MOD1,18,D3_18*% +%TO.N,unconnected-(MOD1-D3-Pad18)*% +X143191650Y-81323100D03* +%TO.P,MOD1,19,D4_19*% +%TO.N,unconnected-(MOD1-D4-Pad19)*% +X140651650Y-81323100D03* +%TO.P,MOD1,20,D5_20*% +%TO.N,unconnected-(MOD1-D5-Pad20)*% +X138111650Y-81323100D03* +%TO.P,MOD1,21,D6_21*% +%TO.N,unconnected-(MOD1-D6-Pad21)*% +X135571650Y-81323100D03* +%TO.P,MOD1,22,D7_22*% +%TO.N,unconnected-(MOD1-D7-Pad22)*% +X133031650Y-81323100D03* +%TO.P,MOD1,23,TX2_D8_23*% +%TO.N,USART1_RX*% +X128971650Y-81323100D03* +%TO.P,MOD1,24,D9_24*% +%TO.N,unconnected-(MOD1-D9-Pad24)*% +X126431650Y-81323100D03* +%TO.P,MOD1,25,D10_25*% +%TO.N,unconnected-(MOD1-D10-Pad25)*% +X123891650Y-81323100D03* +%TO.P,MOD1,26,FENCE_D11_26*% +%TO.N,unconnected-(MOD1-FENCE_D11-Pad26)*% +X121351650Y-81323100D03* +%TO.P,MOD1,27,EXTINT_D12_27*% +%TO.N,unconnected-(MOD1-EXTINT_D12-Pad27)*% +X118811650Y-81323100D03* +%TO.P,MOD1,28,TPS_D13_28*% +%TO.N,unconnected-(MOD1-TPS_D13-Pad28)*% +X116271650Y-81323100D03* +%TO.P,MOD1,29,GND_29*% +%TO.N,GND*% +X113731650Y-81323100D03* +%TO.P,MOD1,30,AREF_30*% +%TO.N,unconnected-(MOD1-AREF-Pad30)*% +X111191650Y-81323100D03* +%TO.P,MOD1,31,SDA_31*% +%TO.N,unconnected-(MOD1-SDA-Pad31)*% +X108651650Y-81323100D03* +%TO.P,MOD1,32,SCL_32*% +%TO.N,unconnected-(MOD1-SCL-Pad32)*% +X106111650Y-81323100D03* +%TD*% +D73* +%TO.N,/GATE_LS*% +X160693550Y-59682200D03* +X154750000Y-63373100D03* +%TO.N,USART1_RX*% +X166039950Y-75929300D03* +X128569450Y-92441500D03* +X110777250Y-111539100D03* +%TO.N,/DIN_4G*% +X160280550Y-60946000D03* +X163333350Y-77836400D03* +%TO.N,GND*% +X109641650Y-76773100D03* +X88641650Y-111773100D03* +X158641650Y-48773100D03* +X165641650Y-55773100D03* +X137641650Y-48773100D03* +X102641650Y-132773100D03* +X102641650Y-118773100D03* +X81641650Y-132773100D03* +X137641650Y-41773100D03* +X194700000Y-105900000D03* +X109641650Y-125773100D03* +X191350000Y-114800000D03* +X116641650Y-97773100D03* +X88641650Y-97773100D03* +X95641650Y-76773100D03* +X109641650Y-132773100D03* +X130641650Y-132773100D03* +X126400000Y-95400000D03* +X109641650Y-62773100D03* +X81641650Y-76773100D03* +X88641650Y-41773100D03* +X102600000Y-99150000D03* +X116641650Y-132773100D03* +X144641650Y-48773100D03* +X88641650Y-104773100D03* +X144641650Y-132773100D03* +X158641650Y-125773100D03* +X109641650Y-90773100D03* +X102641650Y-125773100D03* +X151641650Y-118773100D03* +X158641650Y-132773100D03* +X137641650Y-132773100D03* +X158641650Y-83773100D03* +X95641650Y-132773100D03* +X195146650Y-110668100D03* +X158641650Y-111773100D03* +X88641650Y-76773100D03* +X81641650Y-62773100D03* +X88641650Y-48773100D03* +X130641650Y-69773100D03* +X99300000Y-114700000D03* +X177916650Y-45323100D03* +X116641650Y-125773100D03* +X123641650Y-48773100D03* +X81641650Y-41773100D03* +X138200000Y-91700000D03* +X137641650Y-111773100D03* +X116641650Y-118773100D03* +X88641650Y-83773100D03* +X123641650Y-125773100D03* +X144641650Y-111773100D03* +X165641650Y-41773100D03* +X130641650Y-111773100D03* +X95641650Y-104773100D03* +X123641650Y-83773100D03* +X130200000Y-99700000D03* +X81641650Y-111773100D03* +X123641650Y-69773100D03* +X116641650Y-76773100D03* +X81641650Y-104773100D03* +X187350000Y-62946400D03* +X88641650Y-132773100D03* +X87600000Y-58750000D03* +X144641650Y-41773100D03* +X130200000Y-106000000D03* +X130641650Y-76773100D03* +X81641650Y-48773100D03* +X116641650Y-62773100D03* +X109641650Y-97773100D03* +X116641650Y-48773100D03* +X88641650Y-90773100D03* +X95000000Y-114550000D03* +X81641650Y-83773100D03* +X81641650Y-118773100D03* +X151641650Y-104773100D03* +X88641650Y-69773100D03* +X95641650Y-90773100D03* +X95641650Y-118773100D03* +X81641650Y-69773100D03* +X151641650Y-132773100D03* +X95641650Y-125773100D03* +X81641650Y-97773100D03* +X151641650Y-41773100D03* +X135000000Y-97200000D03* +X88641650Y-118773100D03* +X158641650Y-69773100D03* +X109641650Y-118773100D03* +X165641650Y-48773100D03* +X158641650Y-41773100D03* +X102641650Y-48773100D03* +X95641650Y-41773100D03* +X81641650Y-55773100D03* +X165641650Y-69773100D03* +X95641650Y-111773100D03* +X88641650Y-125773100D03* +X123641650Y-132773100D03* +X127200000Y-118600000D03* +X81641650Y-90773100D03* +X151641650Y-125773100D03* +X123641650Y-76773100D03* +X81641650Y-125773100D03* +X101650000Y-85500000D03* +X144641650Y-118773100D03* +X100016650Y-94323100D03* +%TO.N,IGN_SENSE*% +X98158150Y-78069300D03* +X97851650Y-82803100D03* +X100361150Y-84328200D03* +X120700000Y-67650000D03* +%TO.N,SW_FAN*% +X166684150Y-63823100D03* +X170312950Y-55362600D03* +%TO.N,/5V_FAN*% +X179603350Y-49835200D03* +X190530850Y-50051900D03* +%TO.N,/FAN_RET*% +X108674350Y-96377200D03* +X154715450Y-93359800D03* +X102589950Y-100215700D03* +%TO.N,FAN_TACH_RAW*% +X99473450Y-103450700D03* +X175683950Y-98459400D03* +%TO.N,/EN_FAN*% +X173406650Y-53346300D03* +X174360750Y-60216800D03* +D74* +%TO.N,/BAT_PLUS*% +X119381650Y-89423100D03* +X126821650Y-89223100D03* +D73* +X93354250Y-109584900D03* +X116831650Y-109478500D03* +%TO.N,/NTC*% +X125531650Y-94123100D03* +X115743450Y-105395800D03* +%TO.N,/NRST*% +X124192950Y-57474800D03* +%TO.N,/SW3_NODE*% +X188691650Y-107616000D03* +X187096850Y-116026900D03* +%TO.N,/SW_5V*% +X171760150Y-97690900D03* +D74* +X202151650Y-113193100D03* +D73* +X171616850Y-113477300D03* +X156800000Y-63900000D03* +%TO.N,/FB3*% +X188669750Y-102323100D03* +X196890950Y-110544300D03* +X181474350Y-109498300D03* +%TO.N,/BST3*% +X187141650Y-107717500D03* +X192976150Y-114752100D03* +%TO.N,/BAT_SENSE*% +X92198550Y-67700900D03* +X92096650Y-109080400D03* +%TO.N,/PWR_CTRL*% +X161642250Y-61571200D03* +%TO.N,/5V_SENSE*% +X94238250Y-70412600D03* +X106831950Y-111582800D03* +%TO.N,FAN_PWM*% +X96481050Y-72166600D03* +X93366650Y-93338100D03* +%TO.N,EXT_LED*% +X93850000Y-69300000D03* +X91096750Y-104059500D03* +%TO.N,/NTC_TEMP*% +X164399250Y-108749200D03* +X169737250Y-114087200D03* +%TO.N,FAN_TACH*% +X147661250Y-69044000D03* +X96632650Y-78671100D03* +X98373850Y-101217400D03* +%TO.N,3V3*% +X134491750Y-98820000D03* +X94149150Y-84401600D03* +X99126050Y-102323100D03* +X133429550Y-103586000D03* +X153056550Y-96999800D03* +X132141650Y-111318200D03* +X94584350Y-46323100D03* +%TO.N,/COMP3_C*% +X185251750Y-114635100D03* +X185102650Y-116791200D03* +%TO.N,/MAIN5V*% +X125649250Y-91964400D03* +X118024250Y-91808100D03* +X101515750Y-77180100D03* +%TO.N,/SW_IN*% +X153600000Y-64200000D03* +X135500000Y-61250000D03* +X152216950Y-51550500D03* +X142150000Y-60950000D03* +%TO.N,FAN_GATE*% +X99480750Y-93353800D03* +X102921150Y-95462200D03* +%TO.N,/IGATE*% +X125151650Y-94993100D03* +X113056750Y-91373700D03* +%TO.N,/I2C_SDA*% +X126615050Y-111714800D03* +X101976450Y-75485300D03* +X127665550Y-92441500D03* +%TO.N,/MODEM_LED*% +X198850000Y-88800000D03* +X200050000Y-84450000D03* +%TO.N,/MODEM_LED_A*% +X203900000Y-86050000D03* +X203900000Y-89600000D03* +%TO.N,/I2C_SCL*% +X126634150Y-113349000D03* +X114758150Y-48379800D03* +X129603150Y-92460000D03* +X137323450Y-88991500D03* +%TO.N,/3V3_MODEM*% +X193850000Y-86850000D03* +X190900000Y-89050000D03* +X176066750Y-104039400D03* +X209550000Y-113750000D03* +%TO.N,/MODEM_RST*% +X141900000Y-135600000D03* +%TO.N,/USB_VBUS*% +X167850000Y-84700000D03* +%TO.N,/VEH5V*% +X117951650Y-94803100D03* +X124691650Y-94303100D03* +X166798050Y-79030300D03* +X102876050Y-80722800D03* +%TO.N,/LED_A*% +X177369150Y-107426100D03* +X101070250Y-115089600D03* +X99789850Y-107426100D03* +%TO.N,/24V_IN*% +X91070550Y-62038400D03* +%TO.N,/BASE_LS*% +X164501350Y-60325100D03* +X155562650Y-61161300D03* +%TO.N,/FB_FAN*% +X177545250Y-46302100D03* +X173372150Y-49792700D03* +%TO.N,BST_FAN*% +X168394750Y-46076200D03* +X166741750Y-55441500D03* +%TO.N,/SW_BAT*% +X163800000Y-91850000D03* +X131319350Y-83542700D03* +%TO.N,/BATLED3*% +X166527050Y-75260400D03* +X200007250Y-48492500D03* +%TO.N,/CLPROG_TP*% +X114646550Y-94202200D03* +X113191650Y-106044500D03* +%TO.N,/BATLED4*% +X169830950Y-65597500D03* +X183644750Y-51599100D03* +%TO.N,/F0_SEL*% +X141742750Y-98569500D03* +X124831650Y-95933100D03* +%TO.N,/LED_K*% +X173946950Y-108033000D03* +X110969350Y-113108400D03* +%TO.N,/BATLED2*% +X196017950Y-48827700D03* +X181693450Y-60961400D03* +%TO.N,/USB_CC2*% +X167500000Y-125600000D03* +%TO.N,IGN_IN*% +X104345350Y-71164600D03* +%TO.N,/PFI*% +X124054450Y-91327700D03* +X103327750Y-84222500D03* +X106503750Y-97236300D03* +X107654450Y-82308900D03* +%TO.N,/BATLED1*% +X189562750Y-50997400D03* +X164175850Y-64973500D03* +%TO.N,/CHRG_EN*% +X98082650Y-74113300D03* +X116831050Y-94436200D03* +X105480950Y-106336700D03* +%TO.N,/CHRG_STAT*% +X135231550Y-98013400D03* +X126664550Y-98079400D03* +X140542950Y-92479800D03* +%TO.N,/CHRG_FAULT*% +X144410950Y-96559700D03* +X127507350Y-95248400D03* +%TO.N,/PROG*% +X113901850Y-103113300D03* +X113519050Y-94430400D03* +%TO.N,/VFB_BST*% +X134239650Y-97200400D03* +X130447050Y-92807700D03* +X122002950Y-97751700D03* +%TO.N,/F2_SEL*% +X123382550Y-96548400D03* +X136675750Y-95494500D03* +%TO.N,/F1_SEL*% +X138135550Y-97466200D03* +X127321350Y-96853600D03* +%TD*% +%TO.N,/GATE_LS*% +D75* +X144512500Y-61150000D02* +X143312500Y-59950000D01* +X154750000Y-63373100D02* +X146735600Y-63373100D01* +X144518550Y-61150000D02* +X144512500Y-61150000D01* +X143312500Y-59950000D02* +X137712500Y-59950000D01* +X166541650Y-59323100D02* +X165739650Y-58521100D01* +X146735600Y-63373100D02* +X144512500Y-61150000D01* +X161854650Y-58521100D02* +X160693550Y-59682200D01* +X165739650Y-58521100D02* +X161854650Y-58521100D01* +%TO.N,/SYS5V*% +D76* +X155451650Y-56185800D02* +X155451650Y-56323100D01* +X168191650Y-59323100D02* +X169647750Y-57867000D01* +X188745550Y-57867000D02* +X189284150Y-58405600D01* +X169647750Y-57867000D02* +X188745550Y-57867000D01* +X145054150Y-46323100D02* +X151533250Y-52802200D01* +X151533250Y-52802200D02* +X152068050Y-52802200D01* +X152068050Y-52802200D02* +X155451650Y-56185800D01* +X194265350Y-63386800D02* +X189284150Y-58405600D01* +X201341650Y-61823100D02* +X199777950Y-63386800D01* +X138291650Y-46323100D02* +X145054150Y-46323100D01* +X199777950Y-63386800D02* +X194265350Y-63386800D01* +%TO.N,USART1_RX*% +D75* +X110777250Y-111539100D02* +X110091650Y-112224700D01* +X110091650Y-112224700D02* +X110091650Y-112323100D01* +%TO.N,GND*% +X169515000Y-133785000D02* +X168475000Y-133785000D01* +X196541650Y-84823100D02* +X199123100Y-84823100D01* +X199100000Y-92850000D02* +X199073100Y-92823100D01* +X129479150Y-118323100D02* +X128261650Y-118323100D01* +X196541650Y-92823100D02* +X199073100Y-92823100D01* +X189100000Y-114300000D02* +X191350000Y-114300000D01* +X146387500Y-60200000D02* +X147950000Y-60200000D01* +X168475000Y-130405000D02* +X170005000Y-130405000D01* +X137741650Y-112373100D02* +X137691650Y-112323100D01* +X157350000Y-131700000D02* +X157350000Y-132250000D01* +X121741650Y-94323100D02* +X121241650Y-94823100D01* +X137741650Y-113983100D02* +X137741650Y-112373100D01* +X160489750Y-123925000D02* +X158641650Y-125773100D01* +X159825000Y-130405000D02* +X158655000Y-130405000D01* +X187350000Y-62946400D02* +X184505850Y-62946400D01* +X172326900Y-92823100D02* +X172300000Y-92850000D01* +D77* +X100541650Y-74323100D02* +X99291650Y-74323100D01* +D75* +X124891650Y-117923100D02* +X125861650Y-117923100D01* +X125861650Y-117923100D02* +X126001650Y-118063100D01* +X101773100Y-98323100D02* +X102600000Y-99150000D01* +X161425000Y-123925000D02* +X165400000Y-123925000D01* +X172800000Y-80800000D02* +X172823100Y-80823100D01* +X132901650Y-118823100D02* +X137741650Y-113983100D01* +X101141650Y-98323100D02* +X101773100Y-98323100D01* +X170650000Y-131050000D02* +X170650000Y-132650000D01* +X158885000Y-133785000D02* +X159825000Y-133785000D01* +X184505850Y-62946400D02* +X184129150Y-63323100D01* +D78* +X210191650Y-105823100D02* +X208950000Y-104581450D01* +D75* +X170650000Y-132650000D02* +X169515000Y-133785000D01* +X199123100Y-84823100D02* +X199150000Y-84850000D01* +X158650000Y-130400000D02* +X157350000Y-131700000D01* +X167125000Y-130775000D02* +X167050000Y-130850000D01* +X170005000Y-130405000D02* +X170650000Y-131050000D01* +X121241650Y-94823100D02* +X119791650Y-94823100D01* +X167050000Y-130850000D02* +X167050000Y-132150000D01* +X161425000Y-123925000D02* +X160489750Y-123925000D01* +X126001650Y-118063100D02* +X128001650Y-118063100D01* +X191350000Y-114300000D02* +X191350000Y-114800000D01* +X158655000Y-130405000D02* +X158650000Y-130400000D01* +X188741650Y-114823100D02* +X188741650Y-114658350D01* +X174191650Y-92823100D02* +X172326900Y-92823100D01* +X157350000Y-132250000D02* +X158885000Y-133785000D01* +X128001650Y-118063100D02* +X128261650Y-118323100D01* +D79* +X152050000Y-135600000D02* +X154050000Y-135600000D01* +D75* +X130904150Y-118823100D02* +X132901650Y-118823100D01* +D79* +X212100000Y-92850000D02* +X212073100Y-92823100D01* +D75* +X188741650Y-114658350D02* +X189100000Y-114300000D01* +D79* +X210191650Y-92823100D02* +X212073100Y-92823100D01* +D75* +X174191650Y-80823100D02* +X172823100Y-80823100D01* +D79* +X202162500Y-92100000D02* +X200950000Y-92100000D01* +%TO.N,IGN_SENSE*% +D75* +X120176050Y-67800000D02* +X102064750Y-67800000D01* +X102064750Y-67800000D02* +X100541650Y-69323100D01* +X120700000Y-67650000D02* +X120326050Y-67650000D01* +X100541650Y-72860500D02* +X100541650Y-69323100D01* +X97851650Y-82803100D02* +X97446650Y-83208100D01* +X102004250Y-74323100D02* +X98258050Y-78069300D01* +X120326050Y-67650000D02* +X120176050Y-67800000D01* +X96956650Y-83208100D02* +X96841650Y-83323100D01* +X97446650Y-83208100D02* +X96956650Y-83208100D01* +X102004250Y-74323100D02* +X102191650Y-74323100D01* +X102004250Y-74323100D02* +X100541650Y-72860500D01* +X100816650Y-83872700D02* +X100361150Y-84328200D01* +X98258050Y-78069300D02* +X98158150Y-78069300D01* +X100816650Y-83323100D02* +X100816650Y-83872700D01* +%TO.N,SW_FAN*% +D77* +X171691650Y-54799000D02* +X171691650Y-54633100D01* +X183391650Y-47823100D02* +X183391650Y-49214200D01* +X183391650Y-49214200D02* +X183391650Y-49005200D01* +X170876550Y-54799000D02* +X171691650Y-54799000D01* +X172322250Y-55429600D02* +X171691650Y-54799000D01* +X170396550Y-44118200D02* +X169191650Y-45323100D01* +X183391650Y-49005200D02* +X178504650Y-44118200D01* +X178504650Y-44118200D02* +X170396550Y-44118200D01* +X183391650Y-49214200D02* +X182627250Y-49978600D01* +X182627250Y-49978600D02* +X182627250Y-51369700D01* +X182627250Y-51369700D02* +X178567350Y-55429600D01* +X168191650Y-63823100D02* +X166684150Y-63823100D01* +X178567350Y-55429600D02* +X172322250Y-55429600D01* +X170312950Y-55362600D02* +X170876550Y-54799000D01* +%TO.N,/5V_FAN*% +X95479950Y-85145600D02* +X95479950Y-82751900D01* +X98837050Y-79472800D02* +X99038750Y-79271100D01* +X170298250Y-73436000D02* +X198578750Y-73436000D01* +X174273550Y-46687700D02* +X176504450Y-46687700D01* +X198578750Y-73436000D02* +X210191650Y-61823100D01* +X164891650Y-80323100D02* +X164891650Y-79271100D01* +X92191650Y-88433900D02* +X95479950Y-85145600D01* +X99038750Y-79271100D02* +X164891650Y-79271100D01* +X164891650Y-78842600D02* +X170298250Y-73436000D01* +X179603350Y-49835200D02* +X178791650Y-49835200D01* +X191191650Y-47823100D02* +X191191650Y-49391100D01* +X178791650Y-49835200D02* +X178791650Y-51223100D01* +X191191650Y-49391100D02* +X190530850Y-50051900D01* +X164891650Y-79271100D02* +X164891650Y-78842600D01* +X176504450Y-46687700D02* +X178791650Y-48974900D01* +X178791650Y-48974900D02* +X178791650Y-49835200D01* +X95479950Y-82751900D02* +X98759050Y-79472800D01* +X98759050Y-79472800D02* +X98837050Y-79472800D01* +X173041650Y-45455800D02* +X174273550Y-46687700D01* +X92191650Y-98323100D02* +X92191650Y-88433900D01* +X173041650Y-45323100D02* +X173041650Y-45455800D01* +%TO.N,/FAN_RET*% +X98084250Y-100215700D02* +X102589950Y-100215700D01* +X107183250Y-96377200D02* +X108674350Y-96377200D01* +X107129150Y-96323100D02* +X107183250Y-96377200D01* +X96191650Y-98323100D02* +X98084250Y-100215700D01* +%TO.N,FAN_TACH_RAW*% +D75* +X97169250Y-103450700D02* +X99473450Y-103450700D01* +X96041650Y-102323100D02* +X97169250Y-103450700D01* +%TO.N,/EN_FAN*% +X175016650Y-59323100D02* +X175016650Y-59560900D01* +X177366650Y-59323100D02* +X175016650Y-59323100D01* +X173406650Y-53346300D02* +X171708450Y-53346300D01* +X175016650Y-59560900D02* +X174360750Y-60216800D01* +X171708450Y-53346300D02* +X171691650Y-53363100D01* +%TO.N,/BLED2*% +X199079150Y-44435600D02* +X199079150Y-48323100D01* +X199191650Y-44323100D02* +X199079150Y-44435600D01* +%TO.N,/BAT_PLUS*% +D76* +X119022250Y-107287900D02* +X116831650Y-109478500D01* +X120308850Y-100011900D02* +X126502250Y-100011900D01* +D75* +X121091650Y-90453100D02* +X121241650Y-90603100D01* +D76* +X119022250Y-107287900D02* +X119150650Y-107416300D01* +X129241650Y-97272500D02* +X129241650Y-96323100D01* +X129891250Y-89262700D02* +X129891650Y-89263100D01* +X126861250Y-89262700D02* +X129891250Y-89262700D01* +D75* +X120541650Y-89873100D02* +X121091650Y-90423100D01* +X121091650Y-90423100D02* +X121091650Y-90453100D01* +D76* +X210191650Y-108323100D02* +X210018550Y-108323100D01* +D75* +X119541650Y-89873100D02* +X120541650Y-89873100D01* +X119381650Y-89423100D02* +X119381650Y-89713100D01* +D76* +X154761650Y-95993100D02* +X143251650Y-84483100D01* +X119150650Y-107416300D02* +X154761650Y-107416300D01* +X173543350Y-104509800D02* +X173543350Y-104823100D01* +X154761650Y-107416300D02* +X167046750Y-107416300D01* +X126502250Y-100011900D02* +X129241650Y-97272500D01* +X91715650Y-111011600D02* +X91935650Y-111011600D01* +X167046750Y-107416300D02* +X169639950Y-104823100D01* +X172567550Y-104823100D02* +X173543350Y-104823100D01* +X171591650Y-104823100D02* +X169639950Y-104823100D01* +X154761650Y-107416300D02* +X154761650Y-95993100D01* +X117448150Y-102872600D02* +X120308850Y-100011900D01* +D80* +X91715650Y-112024100D02* +X91416650Y-112323100D01* +D76* +X129891650Y-89263100D02* +X134671650Y-84483100D01* +X177187350Y-100865800D02* +X173543350Y-104509800D01* +X210018550Y-108323100D02* +X202561250Y-100865800D01* +X119022250Y-107287900D02* +X117448150Y-105713800D01* +X117448150Y-105713800D02* +X117448150Y-102872600D01* +X93354250Y-109593000D02* +X93354250Y-109584900D01* +X91935650Y-111011600D02* +X93354250Y-109593000D01* +D80* +X91715650Y-111011600D02* +X91715650Y-112024100D01* +D75* +X121241650Y-90603100D02* +X121241650Y-91873100D01* +X119381650Y-89713100D02* +X119541650Y-89873100D01* +D76* +X202561250Y-100865800D02* +X177187350Y-100865800D01* +X126821650Y-89223100D02* +X126861250Y-89262700D01* +X172567550Y-104823100D02* +X171591650Y-104823100D01* +X134671650Y-84483100D02* +X143251650Y-84483100D01* +%TO.N,/NTC*% +D75* +X104618950Y-105395800D02* +X115743450Y-105395800D01* +X124343121Y-93823100D02* +X123691650Y-93823100D01* +X125471650Y-94023100D02* +X125281450Y-94023100D01* +X124443121Y-93723100D02* +X124343121Y-93823100D01* +X102691650Y-107323100D02* +X104618950Y-105395800D01* +X124981450Y-93723100D02* +X124443121Y-93723100D01* +X125281450Y-94023100D02* +X124981450Y-93723100D01* +X125491650Y-94043100D02* +X125471650Y-94023100D01* +X125531650Y-94123100D02* +X125491650Y-94083100D01* +X125491650Y-94083100D02* +X125491650Y-94043100D01* +%TO.N,/NRST*% +X117351650Y-56323100D02* +X118503350Y-57474800D01* +X118503350Y-57474800D02* +X124192950Y-57474800D01* +%TO.N,CC_FAN*% +X175841650Y-49448100D02* +X175841650Y-52698100D01* +%TO.N,/SW3_NODE*% +D77* +X185607050Y-115685000D02* +X184346350Y-115685000D01* +X187096850Y-116026900D02* +X185948950Y-116026900D01* +X163791650Y-118323100D02* +X165493350Y-118323100D01* +X200096650Y-114478100D02* +X198547850Y-116026900D01* +X188691650Y-107616000D02* +X188691650Y-109823100D01* +X183751950Y-115090600D02* +X168725850Y-115090600D01* +X186491650Y-103823100D02* +X188691650Y-106023100D01* +X185948950Y-116026900D02* +X185607050Y-115685000D01* +X168725850Y-115090600D02* +X165493350Y-118323100D01* +X198547850Y-116026900D02* +X187096850Y-116026900D01* +X184346350Y-115685000D02* +X183751950Y-115090600D01* +X188691650Y-106023100D02* +X188691650Y-107616000D01* +%TO.N,/SW_5V*% +X171223450Y-113083900D02* +X141910850Y-113083900D01* +X200096650Y-113208100D02* +X202136650Y-113208100D01* +X156800000Y-62700000D02* +X157045150Y-62454850D01* +X157045150Y-62454850D02* +X157045150Y-53576600D01* +X157045150Y-53576600D02* +X154691650Y-51223100D01* +X171616850Y-113477300D02* +X193555950Y-113477300D01* +X174077950Y-95373100D02* +X171760150Y-97690900D01* +D81* +X194877450Y-113477300D02* +X195146650Y-113208100D01* +D77* +X210191650Y-95323100D02* +X179741650Y-95323100D01* +X202136650Y-113208100D02* +X202151650Y-113193100D01* +D81* +X193555950Y-113477300D02* +X194877450Y-113477300D01* +D77* +X141910850Y-113083900D02* +X125411650Y-129583100D01* +X156800000Y-63900000D02* +X156800000Y-62700000D01* +X179741650Y-95323100D02* +X179691650Y-95373100D01* +X143987500Y-65300000D02* +X139587500Y-60900000D01* +X171616850Y-113477300D02* +X171223450Y-113083900D01* +X179691650Y-95373100D02* +X174077950Y-95373100D01* +X154700000Y-65300000D02* +X143987500Y-65300000D01* +X156100000Y-63900000D02* +X154700000Y-65300000D01* +X156800000Y-63900000D02* +X156100000Y-63900000D01* +%TO.N,/COMP3*% +D75* +X203711650Y-111938100D02* +X200096650Y-111938100D01* +X179936550Y-117393000D02* +X200251750Y-117393000D01* +X178866650Y-116323100D02* +X179936550Y-117393000D01* +X200251750Y-117393000D02* +X203711650Y-113933100D01* +X203711650Y-113933100D02* +X203711650Y-111938100D01* +%TO.N,/FB3*% +X180866850Y-109498300D02* +X181474350Y-109498300D01* +X200096650Y-110668100D02* +X197014750Y-110668100D01* +X178691650Y-107323100D02* +X180866850Y-109498300D01* +X197014750Y-110668100D02* +X196890950Y-110544300D01* +X180341650Y-102323100D02* +X188669750Y-102323100D01* +%TO.N,/FREQ3*% +X195146650Y-111938100D02* +X194484150Y-112600600D01* +X194484150Y-112600600D02* +X179469150Y-112600600D01* +X179469150Y-112600600D02* +X178691650Y-111823100D01* +%TO.N,/BST3*% +X192976150Y-114752100D02* +X194872650Y-114752100D01* +X194872650Y-114752100D02* +X195146650Y-114478100D01* +X187141650Y-109823100D02* +X187141650Y-107717500D01* +%TO.N,/BLED1*% +X195079150Y-44435600D02* +X195079150Y-48323100D01* +X195191650Y-44323100D02* +X195079150Y-44435600D01* +%TO.N,/BAT_SENSE*% +X94447150Y-110942600D02* +X94447150Y-109166600D01* +X91416650Y-116323100D02* +X93066650Y-114673100D01* +X93779750Y-108499200D02* +X92677850Y-108499200D01* +X93066650Y-112323100D02* +X94447150Y-110942600D01* +X94447150Y-109166600D02* +X93779750Y-108499200D01* +X92677850Y-108499200D02* +X92096650Y-109080400D01* +X97108850Y-113130900D02* +X97916650Y-112323100D01* +X93066650Y-113130900D02* +X93066650Y-112323100D01* +X93066650Y-114673100D02* +X93066650Y-113130900D01* +X93066650Y-113130900D02* +X97108850Y-113130900D01* +%TO.N,/PWR_CTRL*% +X163041650Y-59323100D02* +X163041650Y-60171800D01* +X163041650Y-60171800D02* +X161642250Y-61571200D01* +%TO.N,/GNSS_TX*% +X149373350Y-81460800D02* +X155735650Y-87823100D01* +X155735650Y-87823100D02* +X207691650Y-87823100D01* +X149373350Y-81323100D02* +X149373350Y-81460800D01* +X209039950Y-89171400D02* +X210191650Y-89171400D01* +X210191650Y-90323100D02* +X210191650Y-89171400D01* +X148271650Y-81323100D02* +X149373350Y-81323100D01* +X207691650Y-87823100D02* +X209039950Y-89171400D01* +%TO.N,/5V_SENSE*% +X95416650Y-116323100D02* +X98324750Y-113415000D01* +X106091650Y-112323100D02* +X106831950Y-111582800D01* +X106091650Y-112323100D02* +X103741650Y-112323100D01* +X102649750Y-113415000D02* +X103741650Y-112323100D01* +X98324750Y-113415000D02* +X102649750Y-113415000D01* +%TO.N,FAN_PWM*% +X93366650Y-94323100D02* +X93366650Y-93338100D01* +%TO.N,EXT_LED*% +X94870350Y-105576500D02* +X94166950Y-104873100D01* +X94870350Y-112044400D02* +X94870350Y-105576500D01* +X94166950Y-104873100D02* +X91816650Y-104873100D01* +X94591650Y-112323100D02* +X94870350Y-112044400D01* +X91816650Y-104873100D02* +X91816650Y-104779400D01* +X91816650Y-104779400D02* +X91096750Y-104059500D01* +%TO.N,/NTC_TEMP*% +X115741650Y-112323100D02* +X118141650Y-112323100D01* +X118141650Y-112323100D02* +X121715550Y-108749200D01* +X121715550Y-108749200D02* +X164399250Y-108749200D01* +%TO.N,FAN_TACH*% +X107199550Y-78267100D02* +X98866250Y-78267100D01* +X98462250Y-78671100D02* +X96632650Y-78671100D01* +X98492550Y-101522200D02* +X97691650Y-102323100D01* +X115666550Y-69044000D02* +X111001650Y-73708900D01* +X98492550Y-101522200D02* +X98492550Y-101217400D01* +X100890750Y-101522200D02* +X98492550Y-101522200D01* +X101691650Y-102323100D02* +X100890750Y-101522200D01* +X147661250Y-69044000D02* +X115666550Y-69044000D01* +X98866250Y-78267100D02* +X98462250Y-78671100D01* +X98492550Y-101217400D02* +X98373850Y-101217400D01* +X111001650Y-74465000D02* +X107199550Y-78267100D01* +X111001650Y-73708900D02* +X111001650Y-74465000D01* +%TO.N,3V3*% +X134491750Y-98820000D02* +X134491750Y-99373000D01* +X135317550Y-113147200D02* +X132141650Y-113147200D01* +X131902750Y-111079300D02* +X125093450Y-111079300D01* +X124891650Y-118723100D02* +X124339950Y-118723100D01* +X130492750Y-118300100D02* +X130904150Y-118300100D01* +X130494550Y-118323100D02* +X130191650Y-118626000D01* +X130264650Y-118072000D02* +X130492750Y-118300100D01* +X117791650Y-129583100D02* +X117791650Y-128481400D01* +X131315550Y-118300100D02* +X132141650Y-117474000D01* +X117791650Y-128481400D02* +X124339950Y-121933100D01* +X114091650Y-112323100D02* +X114869350Y-113100800D01* +X93541650Y-83323100D02* +X93541650Y-83794100D01* +X98191650Y-46323100D02* +X94584350Y-46323100D01* +X100041650Y-102323100D02* +X99126050Y-102323100D01* +X128091650Y-112323100D02* +X130264650Y-114496100D01* +X93541650Y-83794100D02* +X94149150Y-84401600D01* +X123313950Y-113100800D02* +X124091650Y-112323100D01* +X130191650Y-118626000D02* +X130191650Y-119004200D01* +X100075150Y-102356600D02* +X100041650Y-102323100D01* +X130191650Y-119004200D02* +X129870650Y-119325200D01* +X132141650Y-113147200D02* +X132141650Y-112323100D01* +X97041650Y-107323100D02* +X100075150Y-104289600D01* +X100075150Y-104289600D02* +X100075150Y-102356600D01* +X126045450Y-119325200D02* +X125443350Y-118723100D01* +X136141650Y-112323100D02* +X135317550Y-113147200D01* +X132141650Y-111318200D02* +X131902750Y-111079300D01* +X114091650Y-112323100D02* +X111741650Y-112323100D01* +X130904150Y-118300100D02* +X130904150Y-118323100D01* +X124091650Y-112081100D02* +X124091650Y-112323100D01* +X129870650Y-119325200D02* +X126045450Y-119325200D01* +X125093450Y-111079300D02* +X124091650Y-112081100D01* +X130904150Y-118323100D02* +X130494550Y-118323100D01* +X132141650Y-117474000D02* +X132141650Y-113147200D01* +X114869350Y-113100800D02* +X123313950Y-113100800D01* +X134166650Y-104323100D02* +X133429550Y-103586000D01* +X130264650Y-114496100D02* +X130264650Y-118072000D01* +X130904150Y-118300100D02* +X131315550Y-118300100D01* +X124339950Y-121933100D02* +X124339950Y-118723100D01* +X124891650Y-118723100D02* +X125443350Y-118723100D01* +X132141650Y-111318200D02* +X132141650Y-112323100D01* +X134491750Y-99373000D02* +X134041650Y-99823100D01* +%TO.N,/COMP3_C*% +X187003650Y-114635100D02* +X187191650Y-114823100D01* +X185251750Y-114635100D02* +X187003650Y-114635100D01* +X180516650Y-116323100D02* +X180984750Y-116791200D01* +X180984750Y-116791200D02* +X185102650Y-116791200D01* +%TO.N,/MAIN5V*% +D76* +X130041650Y-103378100D02* +X130041650Y-104323100D01* +X139938050Y-98598200D02* +X142011250Y-96525000D01* +X121305050Y-101985300D02* +X124691650Y-101985300D01* +X119466450Y-91546200D02* +X118024250Y-91546200D01* +X134041650Y-91323100D02* +X134041650Y-90777200D01* +D82* +X139818650Y-99823100D02* +X139938050Y-99823100D01* +D76* +X138621950Y-101292800D02* +X132641850Y-101292800D01* +X115033650Y-91546200D02* +X112720150Y-89232700D01* +D82* +X142691650Y-96525000D02* +X142691650Y-94823100D01* +D81* +X112082350Y-87882300D02* +X110260850Y-87882300D01* +D76* +X110241650Y-87863100D02* +X110241650Y-86593100D01* +X132641850Y-101292800D02* +X132641850Y-92722900D01* +D82* +X139545650Y-100369100D02* +X139818650Y-100096100D01* +D76* +X134041650Y-90777200D02* +X134951150Y-89867700D01* +X120166450Y-91045800D02* +X119966850Y-91045800D01* +X124691650Y-101985300D02* +X128648850Y-101985300D01* +X126423850Y-91189800D02* +X125649250Y-91964400D01* +X139938050Y-99823100D02* +X139938050Y-98598200D01* +X136884950Y-90323100D02* +X139939750Y-90323100D01* +X112720150Y-89232700D02* +X112720150Y-88520100D01* +X119191650Y-104098700D02* +X121305050Y-101985300D01* +X112720150Y-88520100D02* +X112082350Y-87882300D01* +X124691650Y-104323100D02* +X124691650Y-101985300D01* +D83* +X119466450Y-92497900D02* +X119791650Y-92823100D01* +D76* +X134951150Y-89867700D02* +X136429550Y-89867700D01* +X139818650Y-100096100D02* +X139818650Y-99823100D01* +X119191650Y-104323100D02* +X119191650Y-104098700D01* +X134041650Y-91323100D02* +X133908350Y-91189800D01* +X132641850Y-101292800D02* +X132126950Y-101292800D01* +X139545650Y-100369100D02* +X138621950Y-101292800D01* +X136429550Y-89867700D02* +X136884950Y-90323100D01* +X133908350Y-91189800D02* +X126423850Y-91189800D01* +X132126950Y-101292800D02* +X130041650Y-103378100D01* +D82* +X139938050Y-99823100D02* +X140091650Y-99823100D01* +D76* +X128648850Y-101985300D02* +X130041650Y-103378100D01* +D83* +X119466450Y-91546200D02* +X119466450Y-92497900D01* +D82* +X139939750Y-90323100D02* +X140091650Y-90323100D01* +D76* +X119966850Y-91045800D02* +X119466450Y-91546200D01* +D83* +X120166450Y-91045800D02* +X120166450Y-91297900D01* +D76* +X110251250Y-87872700D02* +X110241650Y-87863100D01* +X118024250Y-91546200D02* +X115033650Y-91546200D01* +X110241650Y-86593100D02* +X110241650Y-85323100D01* +X118024250Y-91808100D02* +X118024250Y-91546200D01* +X132641850Y-92722900D02* +X134041650Y-91323100D01* +D83* +X120166450Y-91297900D02* +X120741650Y-91873100D01* +D81* +X110260850Y-87882300D02* +X110251250Y-87872700D01* +D76* +X142011250Y-96525000D02* +X142691650Y-96525000D01* +%TO.N,/SW_IN*% +D75* +X145400000Y-64200000D02* +X142150000Y-60950000D01* +X149329150Y-46323100D02* +X152216950Y-49210900D01* +X135500000Y-61250000D02* +X136100000Y-61850000D01* +X152216950Y-49210900D02* +X152216950Y-51550500D01* +X136100000Y-61850000D02* +X137712500Y-61850000D01* +X153600000Y-64200000D02* +X145400000Y-64200000D01* +%TO.N,FAN_GATE*% +X99335950Y-93353800D02* +X99480750Y-93353800D01* +X98366650Y-94323100D02* +X95016650Y-94323100D01* +X105165050Y-95462200D02* +X105254150Y-95373100D01* +X98366650Y-94323100D02* +X99335950Y-93353800D01* +X102921150Y-95462200D02* +X105165050Y-95462200D01* +%TO.N,/IGATE*% +X124831650Y-95023100D02* +X124731650Y-94923100D01* +X125121650Y-95023100D02* +X124831650Y-95023100D01* +X112482250Y-91373700D02* +X113056750Y-91373700D01* +X124271650Y-94823100D02* +X123691650Y-94823100D01* +X124731650Y-94923100D02* +X124371650Y-94923100D01* +X124371650Y-94923100D02* +X124271650Y-94823100D01* +X110241650Y-89133100D02* +X112482250Y-91373700D01* +X125151650Y-94993100D02* +X125121650Y-95023100D01* +%TO.N,/VIN_SW*% +D77* +X101654150Y-88323100D02* +X105533450Y-88323100D01* +D76* +X115191650Y-85323100D02* +X115191650Y-86593100D01* +D77* +X105533450Y-88323100D02* +X113223450Y-96013100D01* +D76* +X101654150Y-88323100D02* +X106355850Y-83621400D01* +D77* +X113223450Y-96013100D02* +X118621650Y-96013100D01* +D76* +X113489950Y-83621400D02* +X115191650Y-85323100D01* +D83* +X119111650Y-96503100D02* +X119791650Y-95823100D01* +D76* +X115191650Y-87863100D02* +X115191650Y-89133100D01* +X106355850Y-83621400D02* +X113489950Y-83621400D01* +X115191650Y-86593100D02* +X115191650Y-87863100D01* +D77* +X118621650Y-96013100D02* +X119111650Y-96503100D01* +%TO.N,/I2C_SDA*% +D75* +X130904150Y-117823100D02* +X130904150Y-113485600D01* +X125340150Y-111498800D02* +X126615050Y-111498800D01* +X123491650Y-117923100D02* +X123491650Y-114164600D01* +X123491650Y-114164600D02* +X124916650Y-112739600D01* +X126615050Y-111498800D02* +X128917350Y-111498800D01* +X124916650Y-111922300D02* +X125340150Y-111498800D01* +X126615050Y-111714800D02* +X126615050Y-111498800D01* +X130904150Y-113485600D02* +X129741650Y-112323100D01* +X124916650Y-112739600D02* +X124916650Y-111922300D01* +X128917350Y-111498800D02* +X129741650Y-112323100D01* +%TO.N,/MODEM_LED*% +X200050000Y-84450000D02* +X202225000Y-84450000D01* +X198826900Y-88823100D02* +X198850000Y-88800000D01* +X196541650Y-88823100D02* +X198826900Y-88823100D01* +%TO.N,/MODEM_LED_A*% +X203900000Y-90425000D02* +X204037500Y-90562500D01* +X204037500Y-90562500D02* +X204037500Y-92100000D01* +X203875000Y-84450000D02* +X203875000Y-86025000D01* +X203900000Y-89600000D02* +X203900000Y-90425000D01* +X203875000Y-86025000D02* +X203900000Y-86050000D01* +%TO.N,/I2C_SCL*% +X129126550Y-117470500D02* +X125741650Y-117470500D01* +X105691650Y-46323100D02* +X106843350Y-46323100D01* +X125741650Y-113349000D02* +X125741650Y-112323100D01* +X125741650Y-113349000D02* +X126634150Y-113349000D01* +X107995050Y-47474800D02* +X113853150Y-47474800D01* +X124339950Y-117617100D02* +X124339950Y-117973100D01* +X106843350Y-46323100D02* +X107995050Y-47474800D01* +X125741650Y-117470500D02* +X125741650Y-113349000D01* +X129479150Y-117823100D02* +X129126550Y-117470500D01* +X124339950Y-117973100D02* +X123589950Y-118723100D01* +X123589950Y-118723100D02* +X123491650Y-118723100D01* +X125741650Y-117470500D02* +X124486550Y-117470500D01* +X113853150Y-47474800D02* +X114758150Y-48379800D01* +X124486550Y-117470500D02* +X124339950Y-117617100D01* +%TO.N,/3V3_MODEM*% +D77* +X186336350Y-111032700D02* +X189663350Y-111032700D01* +X209550000Y-113750000D02* +X205464750Y-113750000D01* +X173293350Y-118323100D02* +X177293350Y-122323100D01* +X196541650Y-86823100D02* +X193876900Y-86823100D01* +X178691650Y-104039400D02* +X176066750Y-104039400D01* +X182491650Y-122323100D02* +X186043750Y-118771000D01* +X198904350Y-102323100D02* +X200194750Y-103613500D01* +X189663350Y-111032700D02* +X191153450Y-109542600D01* +X191153450Y-109542600D02* +X200194750Y-109542600D01* +X200443750Y-118771000D02* +X205464750Y-113750000D01* +X171591650Y-118323100D02* +X173293350Y-118323100D01* +X179343050Y-104039400D02* +X186336350Y-111032700D01* +X177293350Y-122323100D02* +X182491650Y-122323100D01* +X198691650Y-102323100D02* +X198904350Y-102323100D01* +X205464750Y-113750000D02* +X207471650Y-111743100D01* +X178691650Y-104039400D02* +X179343050Y-104039400D01* +X207471650Y-111743100D02* +X205271150Y-109542600D01* +X193876900Y-86823100D02* +X193850000Y-86850000D01* +X178691650Y-104039400D02* +X178691650Y-102323100D01* +X186043750Y-118771000D02* +X200443750Y-118771000D01* +X205271150Y-109542600D02* +X200194750Y-109542600D01* +X200194750Y-103613500D02* +X200194750Y-109542600D01* +%TO.N,/MODEM_RST*% +D75* +X144300000Y-135600000D02* +X141900000Y-135600000D01* +%TO.N,/USB_VBUS*% +X167973100Y-84823100D02* +X167850000Y-84700000D01* +X166300000Y-130800000D02* +X166275000Y-130775000D01* +X174191650Y-84823100D02* +X167973100Y-84823100D01* +%TO.N,/USB_DP*% +X163725000Y-129425000D02* +X163725000Y-129675000D01* +X164575000Y-130525000D02* +X164575000Y-130775000D01* +X163725000Y-129675000D02* +X164575000Y-130525000D01* +%TO.N,/VEH5V*% +D76* +X104041650Y-98776200D02* +X104041650Y-102323100D01* +X101306950Y-107323100D02* +X101041650Y-107323100D01* +X99104750Y-87947500D02* +X99104750Y-82832500D01* +D84* +X166798050Y-79716700D02* +X166798050Y-79030300D01* +D75* +X124671650Y-94323100D02* +X123691650Y-94323100D01* +X119031650Y-95323100D02* +X119791650Y-95323100D01* +X117951650Y-94803100D02* +X118027850Y-94803100D01* +D76* +X98729150Y-88323100D02* +X99104750Y-87947500D01* +X101385150Y-90979100D02* +X101385150Y-94059800D01* +X111641650Y-97323100D02* +X111641650Y-97291400D01* +X108410050Y-94059800D02* +X101385150Y-94059800D01* +X98729150Y-88323100D02* +X101385150Y-90979100D01* +D80* +X101306950Y-107874300D02* +X101306950Y-107323100D01* +D76* +X101385150Y-94059800D02* +X101385150Y-96014700D01* +D75* +X123701650Y-94313100D02* +X123691650Y-94323100D01* +D85* +X99690450Y-97874300D02* +X99241650Y-98323100D01* +D84* +X166191650Y-80323100D02* +X166798050Y-79716700D01* +D85* +X99690450Y-96791000D02* +X99690450Y-97874300D01* +D76* +X101385150Y-96014700D02* +X101332650Y-96067200D01* +X99690450Y-96791000D02* +X100414250Y-96067200D01* +X101214450Y-80722800D02* +X102876050Y-80722800D01* +X102091650Y-112323100D02* +X102091650Y-108857000D01* +X104041650Y-102323100D02* +X101306950Y-105057800D01* +X111641650Y-97291400D02* +X108410050Y-94059800D01* +X100414250Y-96067200D02* +X101332650Y-96067200D01* +D75* +X118069750Y-94761200D02* +X118469750Y-94761200D01* +D84* +X166191650Y-80070700D02* +X166191650Y-80323100D01* +D75* +X118027850Y-94803100D02* +X118069750Y-94761200D01* +D80* +X102190650Y-108758000D02* +X101306950Y-107874300D01* +D75* +X118469750Y-94761200D02* +X119031650Y-95323100D01* +D76* +X101332650Y-96067200D02* +X104041650Y-98776200D01* +X99104750Y-82832500D02* +X101214450Y-80722800D01* +D75* +X124691650Y-94303100D02* +X124671650Y-94323100D01* +D76* +X101306950Y-105057800D02* +X101306950Y-107057800D01* +X102091650Y-108857000D02* +X102190650Y-108758000D01* +D80* +X101306950Y-107323100D02* +X101306950Y-107057800D01* +%TO.N,/LED_A*% +D75* +X101070250Y-116264200D02* +X101070250Y-115089600D01* +X99789850Y-107426100D02* +X98794650Y-107426100D01* +X98794650Y-107426100D02* +X98691650Y-107323100D01* +X101129150Y-116323100D02* +X101070250Y-116264200D01* +%TO.N,/24V_IN*% +D77* +X91070550Y-62038400D02* +X89256950Y-62038400D01* +X89041650Y-56733100D02* +X89041650Y-61823100D01* +X89256950Y-62038400D02* +X89041650Y-61823100D01* +X91451650Y-54323100D02* +X89041650Y-56733100D01* +%TO.N,COMP_FAN*% +D75* +X173978150Y-49661600D02* +X173978150Y-50210900D01* +X175841650Y-47798100D02* +X173978150Y-49661600D01* +X172095950Y-52093100D02* +X171691650Y-52093100D01* +X173978150Y-50210900D02* +X172095950Y-52093100D01* +%TO.N,/BASE_LS*% +X164691650Y-60134800D02* +X164501350Y-60325100D01* +X164691650Y-59323100D02* +X164691650Y-60134800D01* +X145487500Y-58275000D02* +X144512500Y-59250000D01* +X155562650Y-61161300D02* +X151461300Y-61161300D01* +X148575000Y-58275000D02* +X151461300Y-61161300D01* +X148575000Y-58275000D02* +X145487500Y-58275000D01* +%TO.N,/FB_FAN*% +X171691650Y-50823100D02* +X172722050Y-49792700D01* +X176266650Y-45323100D02* +X174691650Y-45323100D01* +X176566250Y-45323100D02* +X176266650Y-45323100D01* +X172722050Y-49792700D02* +X173372150Y-49792700D01* +X177545250Y-46302100D02* +X176566250Y-45323100D01* +%TO.N,BST_FAN*% +X166741650Y-55441500D02* +X166741750Y-55441500D01* +X167641650Y-45323100D02* +X168394750Y-46076200D01* +X166741650Y-54633100D02* +X166741650Y-55441500D01* +%TO.N,/SW_BAT*% +D77* +X127332050Y-83542700D02* +X131319350Y-83542700D01* +D76* +X163791650Y-104823100D02* +X163791650Y-91858350D01* +D83* +X122241650Y-88633100D02* +X122241650Y-91873100D01* +D76* +X163791650Y-91858350D02* +X163800000Y-91850000D01* +D83* +X122241650Y-91873100D02* +X121741650Y-91873100D01* +D77* +X122241650Y-88633100D02* +X127332050Y-83542700D01* +%TO.N,/BATLED3*% +D75* +X112271650Y-74103100D02* +X113428950Y-75260400D01* +X201429150Y-48323100D02* +X201259750Y-48492500D01* +X201259750Y-48492500D02* +X200007250Y-48492500D01* +X113428950Y-75260400D02* +X166527050Y-75260400D01* +%TO.N,/BLED3*% +X203191650Y-44323100D02* +X203079150Y-44435600D01* +X203079150Y-44435600D02* +X203079150Y-48323100D01* +%TO.N,/CLPROG_TP*% +X119791650Y-93823100D02* +X115025650Y-93823100D01* +X113191650Y-106044500D02* +X113191650Y-107323100D01* +X115025650Y-93823100D02* +X114646550Y-94202200D01* +%TO.N,FREQ_FAN*% +X166741650Y-52093100D02* +X165423050Y-52093100D01* +X165423050Y-52093100D02* +X161135950Y-56380200D01* +%TO.N,24V*% +D77* +X100129150Y-62453100D02* +X104276050Y-66600000D01* +X98856850Y-63725400D02* +X100129150Y-62453100D01* +X164689650Y-54617400D02* +X164689650Y-54093600D01* +X83264150Y-58490600D02* +X83264150Y-61978200D01* +X104276050Y-66600000D02* +X155850000Y-66600000D01* +X164689650Y-54093600D02* +X165150950Y-53632300D01* +X159278850Y-61953700D02* +X159425150Y-62100000D01* +X161809750Y-57497300D02* +X164689650Y-54617400D01* +X159425150Y-62100000D02* +X159951550Y-62626400D01* +X163466450Y-61759700D02* +X170930050Y-61759700D01* +X159942050Y-52697700D02* +X159942050Y-57497300D01* +X86991650Y-63725400D02* +X98856850Y-63725400D01* +D81* +X166472450Y-53632300D02* +X166741650Y-53363100D01* +D77* +X162599750Y-62626400D02* +X163466450Y-61759700D01* +X159951550Y-62626400D02* +X162599750Y-62626400D01* +D81* +X165150950Y-53632300D02* +X166472450Y-53632300D01* +D77* +X159942050Y-57497300D02* +X159278850Y-58160500D01* +X161416650Y-51223100D02* +X159942050Y-52697700D01* +X100129150Y-62453100D02* +X100129150Y-61323100D01* +X159942050Y-57497300D02* +X161809750Y-57497300D01* +X170930050Y-61759700D02* +X173366650Y-59323100D01* +X161416650Y-47048100D02* +X161416650Y-51223100D01* +X155850000Y-66600000D02* +X159425150Y-63024850D01* +X86991650Y-63725400D02* +X86991650Y-71823100D01* +X159425150Y-63024850D02* +X159425150Y-62100000D01* +X83264150Y-61978200D02* +X85011350Y-63725400D01* +X161691650Y-46773100D02* +X161416650Y-47048100D01* +X85151650Y-56603100D02* +X83264150Y-58490600D01* +X159278850Y-58160500D02* +X159278850Y-61953700D01* +X85011350Y-63725400D02* +X86991650Y-63725400D01* +%TO.N,/BATLED4*% +D75* +X202153150Y-51599100D02* +X183644750Y-51599100D01* +X116964450Y-71950300D02* +X157823150Y-71950300D01* +X114811650Y-74103100D02* +X116964450Y-71950300D01* +X164175950Y-65597500D02* +X169830950Y-65597500D01* +X205429150Y-48323100D02* +X202153150Y-51599100D01* +X157823150Y-71950300D02* +X164175950Y-65597500D01* +%TO.N,/BLED4*% +X207191650Y-44323100D02* +X207079150Y-44435600D01* +X207079150Y-44435600D02* +X207079150Y-48323100D01* +%TO.N,/USB_CC1*% +X162875000Y-129425000D02* +X162875000Y-127025000D01* +X162875000Y-127025000D02* +X161425000Y-125575000D01* +%TO.N,/F0_SEL*% +X124831650Y-95923100D02* +X124701650Y-95793100D01* +X141391650Y-98771400D02* +X141540850Y-98771400D01* +X124286450Y-95323100D02* +X123691650Y-95323100D01* +X141540850Y-98771400D02* +X141742750Y-98569500D01* +X124696450Y-95787900D02* +X124696450Y-95733100D01* +X124831650Y-95933100D02* +X124831650Y-95923100D01* +X124696450Y-95733100D02* +X124286450Y-95323100D01* +X124831650Y-95923100D02* +X124696450Y-95787900D01* +X124701650Y-95793100D02* +X124701650Y-95723100D01* +X141391650Y-99823100D02* +X141391650Y-98771400D01* +%TO.N,/LED_K*% +X93691650Y-105823100D02* +X93691650Y-106634600D01* +X90663850Y-109662400D02* +X90663850Y-116833600D01* +X90991050Y-117160800D02* +X98416450Y-117160800D01* +X99254150Y-116323100D02* +X100258450Y-117327400D01* +X98416450Y-117160800D02* +X99254150Y-116323100D01* +X100258450Y-117327400D02* +X106750350Y-117327400D01* +X106750350Y-117327400D02* +X110969350Y-113108400D01* +X93691650Y-106634600D02* +X90663850Y-109662400D01* +X90663850Y-116833600D02* +X90991050Y-117160800D01* +%TO.N,/Q6_BASE*% +X177366650Y-69148100D02* +X177366650Y-64823100D01* +X178366650Y-70148100D02* +X177366650Y-69148100D01* +X182254150Y-62373100D02* +X179816650Y-62373100D01* +X179816650Y-62373100D02* +X177366650Y-64823100D01* +%TO.N,/BATLED2*% +X197429150Y-48323100D02* +X196924550Y-48827700D01* +X196924550Y-48827700D02* +X196017950Y-48827700D01* +%TO.N,/USB_CC2*% +X167475000Y-125575000D02* +X165400000Y-125575000D01* +X167500000Y-125600000D02* +X167475000Y-125575000D01* +%TO.N,IGN_IN*% +D77* +X104033150Y-71164600D02* +X104345350Y-71164600D01* +X102191650Y-69323100D02* +X104033150Y-71164600D01* +%TO.N,/PFI*% +D75* +X124054450Y-92460300D02* +X123691650Y-92823100D01* +X107470850Y-82492500D02* +X107654450Y-82308900D01* +X106503750Y-102323100D02* +X106503750Y-97236300D01* +X103327750Y-84222500D02* +X105057750Y-82492500D01* +X105691650Y-102323100D02* +X106503750Y-102323100D01* +X106503750Y-102323100D02* +X107541650Y-102323100D01* +X105057750Y-82492500D02* +X107470850Y-82492500D01* +X124054450Y-91327700D02* +X124054450Y-92460300D01* +%TO.N,/KCOIL*% +D79* +X182254150Y-64273100D02* +X182254150Y-66054150D01* +X201464750Y-58400000D02* +X198041650Y-61823100D01* +X204400000Y-62750000D02* +X204400000Y-59750000D01* +D75* +X198041650Y-61823100D02* +X197781650Y-61823100D01* +D79* +X196650000Y-70500000D02* +X204400000Y-62750000D01* +X182254150Y-66054150D02* +X186700000Y-70500000D01* +X204400000Y-59750000D02* +X203050000Y-58400000D01* +X186700000Y-70500000D02* +X196650000Y-70500000D01* +X203050000Y-58400000D02* +X201464750Y-58400000D01* +D75* +X197781650Y-61823100D02* +X194364150Y-58405600D01* +%TO.N,/BATLED1*% +X160853950Y-68295400D02* +X164175850Y-64973500D01* +X107191650Y-74103100D02* +X108343350Y-74103100D01* +X108343350Y-74103100D02* +X108343350Y-73815200D01* +X113863150Y-68295400D02* +X160853950Y-68295400D01* +X193429150Y-48679100D02* +X193429150Y-48323100D01* +X191110850Y-50997400D02* +X193429150Y-48679100D01* +X108343350Y-73815200D02* +X113863150Y-68295400D01* +X189562750Y-50997400D02* +X191110850Y-50997400D01* +%TO.N,/CHRG_EN*% +X118851650Y-94203100D02* +X118981650Y-94333100D01* +X117641650Y-94203100D02* +X117521650Y-94323100D01* +X116944150Y-94323100D02* +X116831050Y-94436200D01* +X118981650Y-94333100D02* +X118991650Y-94323100D01* +X105041650Y-106776000D02* +X105480950Y-106336700D01* +X105041650Y-107323100D02* +X105041650Y-106776000D01* +X117641650Y-94203100D02* +X118851650Y-94203100D01* +X118991650Y-94323100D02* +X119791650Y-94323100D01* +X117521650Y-94323100D02* +X116944150Y-94323100D01* +%TO.N,/CHRG_STAT*% +X135231550Y-98013400D02* +X135691650Y-98013400D01* +X120741650Y-97933800D02* +X121563050Y-98755200D01* +X121563050Y-98755200D02* +X125988750Y-98755200D01* +X135691650Y-99823100D02* +X135691650Y-98013400D01* +X120741650Y-96773100D02* +X120741650Y-97933800D01* +X135691650Y-98013400D02* +X135691650Y-97331100D01* +X125988750Y-98755200D02* +X126664550Y-98079400D01* +X135691650Y-97331100D02* +X140542950Y-92479800D01* +%TO.N,/CHRG_FAULT*% +X127560150Y-97466000D02* +X127934450Y-97091700D01* +X144410950Y-96559700D02* +X144410950Y-99547600D01* +X127934450Y-95675500D02* +X127507350Y-95248400D01* +X139635450Y-104323100D02* +X135816650Y-104323100D01* +X121729350Y-98353400D02* +X123582650Y-98353400D01* +X124470050Y-97466000D02* +X127560150Y-97466000D01* +X127934450Y-97091700D02* +X127934450Y-95675500D01* +X144410950Y-99547600D02* +X139635450Y-104323100D01* +X123582650Y-98353400D02* +X124470050Y-97466000D01* +X121241650Y-96773100D02* +X121241650Y-97865700D01* +X121241650Y-97865700D02* +X121729350Y-98353400D01* +%TO.N,/BYP_CTRL*% +X177291650Y-72417800D02* +X139356950Y-72417800D01* +X139356950Y-72417800D02* +X137671650Y-74103100D01* +X178366650Y-68498100D02* +X179164350Y-69295800D01* +X179164350Y-70545100D02* +X177291650Y-72417800D01* +X179164350Y-69295800D02* +X179164350Y-70545100D01* +%TO.N,Q10_GATE*% +X94629050Y-51096600D02* +X86098150Y-51096600D01* +X86587750Y-53479200D02* +X86587750Y-59102000D01* +X85151650Y-52043100D02* +X86587750Y-53479200D01* +X98254150Y-54721700D02* +X94629050Y-51096600D01* +X86098150Y-51096600D02* +X85151650Y-52043100D01* +X98254150Y-60373100D02* +X98254150Y-54721700D01* +X86587750Y-59102000D02* +X84366650Y-61323100D01* +%TO.N,/PROG*% +X112331850Y-103113300D02* +X111541650Y-102323100D01* +X113901850Y-103113300D02* +X112331850Y-103113300D01* +X114626350Y-93323100D02* +X113519050Y-94430400D01* +X119791650Y-93323100D02* +X114626350Y-93323100D01* +%TO.N,/VFB_BST*% +X134041650Y-95323100D02* +X134239650Y-95521100D01* +X134041650Y-95323100D02* +X134041650Y-92973100D01* +X123691650Y-93323100D02* +X129931650Y-93323100D01* +X129931650Y-93323100D02* +X130447050Y-92807700D01* +X134041650Y-92973100D02* +X135691650Y-91323100D01* +X134239650Y-95521100D02* +X134239650Y-97200400D01* +X121741650Y-97490400D02* +X122002950Y-97751700D01* +X121741650Y-96773100D02* +X121741650Y-97490400D01* +%TO.N,/F2_SEL*% +X122741650Y-96773100D02* +X122966350Y-96548400D01* +X140795450Y-91374800D02* +X136675750Y-95494500D01* +X141391650Y-91374800D02* +X140795450Y-91374800D01* +X122966350Y-96548400D02* +X123382550Y-96548400D01* +X141391650Y-90323100D02* +X141391650Y-91374800D01* +%TO.N,/F1_SEL*% +X123691650Y-95823100D02* +X124722150Y-96853600D01* +X124722150Y-96853600D02* +X127321350Y-96853600D01* +X139201350Y-97466200D02* +X141391650Y-95275900D01* +X141391650Y-95275900D02* +X141391650Y-94823100D01* +X138135550Y-97466200D02* +X139201350Y-97466200D01* +%TO.N,/PFO_TP*% +X127691650Y-87323100D02* +X127208250Y-87323100D01* +X122741650Y-91789700D02* +X122741650Y-91873100D01* +X127208250Y-87323100D02* +X122741650Y-91789700D01* +%TD*% +%TA.AperFunction,Conductor*% +%TO.N,GND*% +G36* +X130025725Y-129390107D02* +G01* +X129991650Y-129517274D01* +X129991650Y-129648926D01* +X130025725Y-129776093D01* +X130058638Y-129833100D01* +X128384662Y-129833100D01* +X128417575Y-129776093D01* +X128451650Y-129648926D01* +X128451650Y-129517274D01* +X128417575Y-129390107D01* +X128384662Y-129333100D01* +X130058638Y-129333100D01* +X130025725Y-129390107D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X125006734Y-117739907D02* +G01* +X125018547Y-117749996D01* +X125041651Y-117773100D01* +X125641649Y-117773100D01* +X125664753Y-117749996D01* +X125719270Y-117722219D01* +X125734757Y-117721000D01* +X125791478Y-117721000D01* +X128664547Y-117721000D01* +X128722738Y-117739907D01* +X128758702Y-117789407D01* +X128762700Y-117807079D01* +X128776770Y-117913966D01* +X128776771Y-117913967D01* +X128835967Y-118056882D01* +X128930138Y-118179607D01* +X128930142Y-118179611D01* +X129052864Y-118273780D01* +X129052866Y-118273781D01* +X129065268Y-118278918D01* +X129111795Y-118318654D01* +X129124481Y-118351062D01* +X129124959Y-118353463D01* +X129124959Y-118353464D01* +X129124960Y-118353465D01* +X129177559Y-118432187D01* +X129177562Y-118432190D01* +X129239243Y-118473403D01* +X129256287Y-118484791D01* +X129309063Y-118495289D01* +X129325697Y-118498598D01* +X129325702Y-118498598D01* +X129325708Y-118498600D01* +X129325709Y-118498600D01* +X129842150Y-118498600D01* +X129900341Y-118517507D01* +X129936305Y-118567007D01* +X129941150Y-118597600D01* +X129941150Y-118859431D01* +X129938681Y-118867028D01* +X129939931Y-118874918D01* +X129929406Y-118895573D01* +X129922243Y-118917622D01* +X129912154Y-118929435D01* +X129795885Y-119045704D01* +X129741368Y-119073481D01* +X129725881Y-119074700D01* +X126190219Y-119074700D01* +X126132028Y-119055793D01* +X126120215Y-119045704D01* +X125877706Y-118803195D01* +X125585247Y-118510736D01* +X125585245Y-118510735D01* +X125585242Y-118510732D01* +X125577138Y-118505317D01* +X125578867Y-118502729D01* +X125544535Y-118473403D01* +X125530256Y-118413907D01* +X125549697Y-118362351D01* +X125585004Y-118315187D01* +X125635246Y-118180481D01* +X125635248Y-118180470D01* +X125641650Y-118120924D01* +X125641650Y-118073101D01* +X125641649Y-118073100D01* +X124990650Y-118073100D01* +X124932459Y-118054193D01* +X124896495Y-118004693D01* +X124891650Y-117974100D01* +X124891650Y-117923101D01* +X124891649Y-117923100D01* +X124840650Y-117923100D01* +X124825738Y-117918255D01* +X124810057Y-117918255D01* +X124797371Y-117909038D01* +X124782459Y-117904193D01* +X124773242Y-117891507D01* +X124760557Y-117882291D01* +X124755711Y-117867378D01* +X124746495Y-117854693D01* +X124741650Y-117824100D01* +X124741650Y-117820000D01* +X124760557Y-117761809D01* +X124810057Y-117725845D01* +X124840650Y-117721000D01* +X124948543Y-117721000D01* +X125006734Y-117739907D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X131604971Y-111330635D02* +G01* +X131607582Y-111329936D01* +X131633835Y-111340013D01* +X131660592Y-111348707D01* +X131662180Y-111350893D01* +X131664703Y-111351862D01* +X131680017Y-111375443D01* +X131696556Y-111398207D01* +X131698025Y-111403168D01* +X131703032Y-111421854D01* +X131721852Y-111492090D01* +X131784405Y-111600433D01* +X131781983Y-111601831D01* +X131798507Y-111648448D01* +X131781148Y-111707119D01* +X131743024Y-111740010D01* +X131695441Y-111763272D01* +X131606823Y-111851890D01* +X131551784Y-111964473D01* +X131548375Y-111987872D01* +X131541150Y-112037464D01* +X131541150Y-112608736D01* +X131546047Y-112642346D01* +X131551784Y-112681726D01* +X131590302Y-112760515D01* +X131606824Y-112794311D01* +X131695439Y-112882926D01* +X131808025Y-112937966D01* +X131808029Y-112937966D01* +X131815367Y-112940234D01* +X131814853Y-112941896D01* +X131861279Y-112964831D01* +X131889731Y-113018999D01* +X131891150Y-113035698D01* +X131891150Y-117329231D01* +X131872243Y-117387422D01* +X131862153Y-117399235D01* +X131698895Y-117562492D01* +X131644379Y-117590269D01* +X131584225Y-117580839D01* +X131551248Y-117564167D01* +X131532064Y-117545104D01* +X131511503Y-117527543D01* +X131509664Y-117522844D01* +X131507847Y-117521039D01* +X131507065Y-117516205D01* +X131498817Y-117495128D01* +X131498341Y-117492737D01* +X131498340Y-117492736D01* +X131488563Y-117478103D01* +X131471953Y-117419215D01* +X131488563Y-117368097D01* +X131490220Y-117365616D01* +X131498341Y-117353463D01* +X131512150Y-117284042D01* +X131512150Y-117062158D01* +X131498341Y-116992737D01* +X131463667Y-116940842D01* +X131445740Y-116914012D01* +X131445737Y-116914009D01* +X131367015Y-116861410D01* +X131367013Y-116861409D01* +X131367010Y-116861408D01* +X131367009Y-116861408D01* +X131297602Y-116847601D01* +X131297592Y-116847600D01* +X131297591Y-116847600D01* +X131253650Y-116847600D01* +X131195459Y-116828693D01* +X131159495Y-116779193D01* +X131154650Y-116748600D01* +X131154650Y-113435771D01* +X131116514Y-113343703D01* +X131046047Y-113273235D01* +X131046047Y-113273236D01* +X130321146Y-112548335D01* +X130293369Y-112493818D01* +X130292150Y-112478331D01* +X130292150Y-112014843D01* +X130292150Y-112014840D01* +X130282223Y-111946707D01* +X130282221Y-111946703D01* +X130255422Y-111891884D01* +X130230848Y-111841617D01* +X130148133Y-111758902D01* +X130128492Y-111749300D01* +X130043045Y-111707527D01* +X130008053Y-111702429D01* +X129974910Y-111697600D01* +X129511419Y-111697600D01* +X129453228Y-111678693D01* +X129441415Y-111668604D01* +X129271615Y-111498804D01* +X129243838Y-111444287D01* +X129253409Y-111383855D01* +X129296674Y-111340590D01* +X129341619Y-111329800D01* +X131602401Y-111329800D01* +X131604971Y-111330635D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X123575386Y-91406967D02* +G01* +X123618651Y-91450232D01* +X123626067Y-91469553D01* +X123634650Y-91501585D01* +X123634652Y-91501589D01* +X123693957Y-91604308D01* +X123693959Y-91604310D01* +X123693961Y-91604313D01* +X123774955Y-91685307D01* +X123802731Y-91739822D01* +X123803950Y-91755309D01* +X123803950Y-92315531D01* +X123801481Y-92323128D01* +X123802731Y-92331018D01* +X123792206Y-92351673D01* +X123785043Y-92373722D01* +X123774954Y-92385535D01* +X123641885Y-92518604D01* +X123587368Y-92546381D01* +X123571881Y-92547600D01* +X123308167Y-92547600D01* +X123246040Y-92559957D01* +X123175587Y-92607033D01* +X123175583Y-92607037D01* +X123128507Y-92677490D01* +X123116150Y-92739617D01* +X123116150Y-92906582D01* +X123128507Y-92968708D01* +X123161509Y-93018099D01* +X123178117Y-93076987D01* +X123161509Y-93128101D01* +X123128507Y-93177491D01* +X123116150Y-93239617D01* +X123116150Y-93406582D01* +X123128507Y-93468708D01* +X123161509Y-93518099D01* +X123178117Y-93576987D01* +X123161509Y-93628101D01* +X123128507Y-93677491D01* +X123116150Y-93739617D01* +X123116150Y-93906582D01* +X123128507Y-93968708D01* +X123161509Y-94018099D01* +X123178117Y-94076987D01* +X123161509Y-94128101D01* +X123128507Y-94177491D01* +X123116150Y-94239617D01* +X123116150Y-94406582D01* +X123128507Y-94468708D01* +X123161509Y-94518099D01* +X123178117Y-94576987D01* +X123161509Y-94628101D01* +X123128507Y-94677491D01* +X123116150Y-94739617D01* +X123116150Y-94906582D01* +X123128507Y-94968708D01* +X123161509Y-95018099D01* +X123178117Y-95076987D01* +X123161509Y-95128101D01* +X123128507Y-95177491D01* +X123116150Y-95239617D01* +X123116150Y-95406582D01* +X123128507Y-95468708D01* +X123161509Y-95518099D01* +X123178117Y-95576987D01* +X123161509Y-95628101D01* +X123128507Y-95677491D01* +X123116150Y-95739617D01* +X123116150Y-95906582D01* +X123128507Y-95968709D01* +X123169192Y-96029597D01* +X123185801Y-96088485D01* +X123164624Y-96145889D01* +X123149328Y-96161416D01* +X123143203Y-96166394D01* +X123105937Y-96187911D01* +X123058984Y-96234863D01* +X123055028Y-96238080D01* +X123031005Y-96247354D01* +X123008063Y-96259044D01* +X123002861Y-96258220D01* +X122997949Y-96260117D01* +X122973063Y-96253500D01* +X122947631Y-96249472D01* +X122939094Y-96244468D01* +X122938818Y-96244395D01* +X122938680Y-96244226D01* +X122937575Y-96243578D01* +X122887259Y-96209957D01* +X122825132Y-96197600D01* +X122825130Y-96197600D01* +X122658170Y-96197600D01* +X122658167Y-96197600D01* +X122596041Y-96209957D01* +X122546651Y-96242959D01* +X122487763Y-96259567D01* +X122436649Y-96242959D01* +X122387258Y-96209957D01* +X122387259Y-96209957D01* +X122325132Y-96197600D01* +X122325130Y-96197600D01* +X122158170Y-96197600D01* +X122158167Y-96197600D01* +X122096041Y-96209957D01* +X122046651Y-96242959D01* +X121987763Y-96259567D01* +X121936649Y-96242959D01* +X121887258Y-96209957D01* +X121887259Y-96209957D01* +X121825132Y-96197600D01* +X121825130Y-96197600D01* +X121658170Y-96197600D01* +X121658167Y-96197600D01* +X121596041Y-96209957D01* +X121546651Y-96242959D01* +X121487763Y-96259567D01* +X121436649Y-96242959D01* +X121387258Y-96209957D01* +X121387259Y-96209957D01* +X121325132Y-96197600D01* +X121325130Y-96197600D01* +X121158170Y-96197600D01* +X121158167Y-96197600D01* +X121096041Y-96209957D01* +X121046651Y-96242959D01* +X120987763Y-96259567D01* +X120936649Y-96242959D01* +X120887258Y-96209957D01* +X120887259Y-96209957D01* +X120825132Y-96197600D01* +X120825130Y-96197600D01* +X120658170Y-96197600D01* +X120658167Y-96197600D01* +X120596040Y-96209957D01* +X120525587Y-96257033D01* +X120525583Y-96257037D01* +X120478507Y-96327490D01* +X120466150Y-96389617D01* +X120466150Y-97156582D01* +X120478507Y-97218709D01* +X120482239Y-97227717D01* +X120479387Y-97228898D01* +X120491150Y-97267660D01* +X120491150Y-97983628D01* +X120529284Y-98075694D01* +X120529285Y-98075695D01* +X120529286Y-98075697D01* +X121350686Y-98897097D01* +X121350685Y-98897097D01* +X121395985Y-98942396D01* +X121423763Y-98996912D01* +X121414192Y-99057344D01* +X121370928Y-99100609D01* +X121325982Y-99111400D01* +X120220155Y-99111400D01* +X120046185Y-99146004D01* +X119943972Y-99188343D01* +X119943971Y-99188343D01* +X119882305Y-99213885D01* +X119882304Y-99213885D01* +X119757768Y-99297099D01* +X119734817Y-99312434D01* +X116748684Y-102298566D01* +X116748683Y-102298567D01* +X116743204Y-102306769D01* +X116743202Y-102306772D01* +X116650135Y-102446054D01* +X116650135Y-102446055D01* +X116629040Y-102496985D01* +X116629040Y-102496986D01* +X116582254Y-102609935D01* +X116547650Y-102783905D01* +X116547650Y-105802494D01* +X116582254Y-105976464D01* +X116650136Y-106140346D01* +X116686523Y-106194801D01* +X116686524Y-106194803D01* +X116742410Y-106278444D01* +X116748686Y-106287836D01* +X117249946Y-106789095D01* +X117678746Y-107217895D01* +X117706523Y-107272412D01* +X117696952Y-107332844D01* +X117678746Y-107357903D01* +X116132183Y-108904467D01* +X116033637Y-109051953D01* +X115965756Y-109215830D01* +X115965754Y-109215836D01* +X115931150Y-109389805D01* +X115931150Y-109567194D01* +X115965754Y-109741163D01* +X115965756Y-109741169D01* +X116033637Y-109905046D01* +X116132183Y-110052532D01* +X116132186Y-110052536D01* +X116257614Y-110177964D01* +X116405103Y-110276512D01* +X116568984Y-110344395D01* +X116742958Y-110379000D01* +X116742959Y-110379000D01* +X116920341Y-110379000D01* +X116920342Y-110379000D01* +X117094316Y-110344395D01* +X117258197Y-110276512D01* +X117405686Y-110177964D01* +X119237854Y-108345796D01* +X119292371Y-108318019D01* +X119307858Y-108316800D01* +X121607160Y-108316800D01* +X121665351Y-108335707D01* +X121701315Y-108385207D01* +X121701315Y-108446393D01* +X121665351Y-108495893D01* +X121645045Y-108507264D01* +X121573653Y-108536834D01* +X121503185Y-108607302D01* +X121503186Y-108607303D01* +X121503185Y-108607304D01* +X118441884Y-111668604D01* +X118387367Y-111696381D01* +X118371880Y-111697600D01* +X117881014Y-111697600D01* +X117837220Y-111703980D01* +X117808023Y-111708234D01* +X117695440Y-111763273D01* +X117606823Y-111851890D01* +X117551784Y-111964473D01* +X117551784Y-111964475D01* +X117548374Y-111987874D01* +X117521277Y-112042729D01* +X117467110Y-112071181D01* +X117450410Y-112072600D01* +X116386187Y-112072600D01* +X116327996Y-112053693D01* +X116292032Y-112004193D01* +X116288222Y-111987875D01* +X116282223Y-111946707D01* +X116275445Y-111932843D01* +X116230848Y-111841617D01* +X116148133Y-111758902D01* +X116128492Y-111749300D01* +X116043045Y-111707527D01* +X116008053Y-111702429D01* +X115974910Y-111697600D01* +X115508390Y-111697600D01* +X115475247Y-111702429D01* +X115440254Y-111707527D01* +X115335168Y-111758901D01* +X115252451Y-111841618D01* +X115201077Y-111946704D01* +X115198488Y-111964473D01* +X115191150Y-112014840D01* +X115191150Y-112631360D01* +X115192751Y-112642346D01* +X115201077Y-112699496D01* +X115205148Y-112707822D01* +X115206150Y-112714912D01* +X115210361Y-112720707D01* +X115210361Y-112744677D01* +X115213717Y-112768404D01* +X115210361Y-112774729D01* +X115210361Y-112781893D01* +X115196271Y-112801285D01* +X115185041Y-112822453D01* +X115178607Y-112825598D01* +X115174397Y-112831393D01* +X115151601Y-112838799D01* +X115130072Y-112849324D01* +X115116206Y-112850300D01* +X115014117Y-112850300D01* +X114955926Y-112831393D01* +X114944113Y-112821303D01* +X114671146Y-112548335D01* +X114643369Y-112493819D01* +X114642150Y-112478332D01* +X114642150Y-112014843D01* +X114642150Y-112014840D01* +X114632223Y-111946707D01* +X114632221Y-111946703D01* +X114605422Y-111891884D01* +X114580848Y-111841617D01* +X114498133Y-111758902D01* +X114478492Y-111749300D01* +X114393045Y-111707527D01* +X114358053Y-111702429D01* +X114324910Y-111697600D01* +X113858390Y-111697600D01* +X113825247Y-111702429D01* +X113790254Y-111707527D01* +X113685168Y-111758901D01* +X113602451Y-111841618D01* +X113551076Y-111946707D01* +X113545078Y-111987875D01* +X113517978Y-112042731D01* +X113463810Y-112071182D01* +X113447113Y-112072600D01* +X112386187Y-112072600D01* +X112327996Y-112053693D01* +X112292032Y-112004193D01* +X112288222Y-111987875D01* +X112282223Y-111946707D01* +X112275445Y-111932843D01* +X112230848Y-111841617D01* +X112148133Y-111758902D01* +X112128492Y-111749300D01* +X112043045Y-111707527D01* +X112008053Y-111702429D01* +X111974910Y-111697600D01* +X111508390Y-111697600D01* +X111475247Y-111702429D01* +X111440254Y-111707527D01* +X111357471Y-111747998D01* +X111296889Y-111756569D01* +X111242839Y-111727893D01* +X111215967Y-111672925D01* +X111218365Y-111633433D01* +X111219946Y-111627535D01* +X111227750Y-111598409D01* +X111227750Y-111479791D01* +X111197049Y-111365214D01* +X111197047Y-111365211D01* +X111197047Y-111365209D01* +X111137742Y-111262491D01* +X111137740Y-111262489D01* +X111137739Y-111262487D01* +X111053863Y-111178611D01* +X111053860Y-111178609D01* +X111053858Y-111178607D01* +X110951139Y-111119302D01* +X110951140Y-111119302D01* +X110937601Y-111115674D01* +X110836559Y-111088600D01* +X110717941Y-111088600D01* +X110647817Y-111107389D01* +X110603359Y-111119302D01* +X110500641Y-111178607D01* +X110416757Y-111262491D01* +X110357452Y-111365209D01* +X110345244Y-111410770D01* +X110338759Y-111434975D01* +X110326750Y-111479792D01* +X110326750Y-111594332D01* +X110324283Y-111601923D01* +X110325533Y-111609808D01* +X110315008Y-111630469D01* +X110307843Y-111652523D01* +X110297762Y-111664327D01* +X110293495Y-111668595D01* +X110238981Y-111696379D01* +X110223483Y-111697600D01* +X109858390Y-111697600D01* +X109825247Y-111702429D01* +X109790254Y-111707527D01* +X109685168Y-111758901D01* +X109602451Y-111841618D01* +X109551077Y-111946704D01* +X109548488Y-111964473D01* +X109541150Y-112014840D01* +X109541150Y-112631360D01* +X109542751Y-112642346D01* +X109551077Y-112699495D01* +X109591561Y-112782305D01* +X109602452Y-112804583D01* +X109685167Y-112887298D01* +X109738935Y-112913583D01* +X109790254Y-112938672D01* +X109790255Y-112938672D01* +X109790257Y-112938673D01* +X109858390Y-112948600D01* +X109858393Y-112948600D01* +X110324907Y-112948600D01* +X110324910Y-112948600D01* +X110393043Y-112938673D01* +X110393044Y-112938672D01* +X110400651Y-112937564D01* +X110400887Y-112939189D01* +X110422188Y-112939495D01* +X110452474Y-112939770D01* +X110452694Y-112939933D01* +X110452968Y-112939937D01* +X110477300Y-112958153D01* +X110501646Y-112976181D01* +X110501706Y-112976425D01* +X110501948Y-112976606D01* +X110520025Y-113034541D01* +X110519929Y-113045062D01* +X110518850Y-113049091D01* +X110518850Y-113164086D01* +X110518846Y-113164528D01* +X110509262Y-113193139D01* +X110499943Y-113221821D01* +X110499468Y-113222376D01* +X110499412Y-113222545D01* +X110499188Y-113222704D01* +X110489854Y-113233634D01* +X106675585Y-117047904D01* +X106621068Y-117075681D01* +X106605581Y-117076900D01* +X101825321Y-117076900D01* +X101767130Y-117057993D01* +X101731166Y-117008493D01* +X101731166Y-116947307D01* +X101737112Y-116932955D01* +X101752525Y-116902704D01* +X101752525Y-116902703D01* +X101752528Y-116902698D01* +X101764295Y-116828402D01* +X101767150Y-116810378D01* +X101767150Y-115835821D01* +X101762439Y-115806085D01* +X101752528Y-115743502D01* +X101695830Y-115632227D01* +X101607523Y-115543920D01* +X101607520Y-115543918D01* +X101607521Y-115543918D01* +X101489305Y-115483684D01* +X101490205Y-115481917D01* +X101449024Y-115451992D01* +X101430122Y-115393799D01* +X101443385Y-115344308D01* +X101490049Y-115263486D01* +X101520750Y-115148909D01* +X101520750Y-115030291D01* +X101490049Y-114915714D01* +X101490047Y-114915711D01* +X101490047Y-114915709D01* +X101430742Y-114812991D01* +X101430740Y-114812989D01* +X101430739Y-114812987D01* +X101346863Y-114729111D01* +X101346860Y-114729109D01* +X101346858Y-114729107D01* +X101244139Y-114669802D01* +X101244140Y-114669802D01* +X101230601Y-114666174D01* +X101129559Y-114639100D01* +X101010941Y-114639100D01* +X100940817Y-114657889D01* +X100896359Y-114669802D01* +X100793641Y-114729107D01* +X100709757Y-114812991D01* +X100650452Y-114915709D01* +X100640190Y-114954007D01* +X100619750Y-115030291D01* +X100619750Y-115148909D01* +X100634137Y-115202600D01* +X100650452Y-115263490D01* +X100709757Y-115366208D01* +X100709759Y-115366210D01* +X100709761Y-115366213D01* +X100711225Y-115367677D01* +X100711897Y-115368997D01* +X100713710Y-115371359D01* +X100713272Y-115371694D01* +X100739001Y-115422192D01* +X100729430Y-115482624D01* +X100686166Y-115525888D01* +X100650779Y-115543918D01* +X100562468Y-115632229D01* +X100505773Y-115743498D01* +X100505772Y-115743502D01* +X100491150Y-115835821D01* +X100491150Y-116810378D01* +X100505772Y-116902697D01* +X100505774Y-116902704D01* +X100521188Y-116932955D01* +X100522437Y-116940842D01* +X100527134Y-116947307D01* +X100527134Y-116970494D01* +X100530760Y-116993387D01* +X100527134Y-117000503D01* +X100527134Y-117008493D01* +X100513505Y-117027250D01* +X100502983Y-117047903D01* +X100495866Y-117051529D01* +X100491170Y-117057993D01* +X100469119Y-117065157D01* +X100448466Y-117075681D01* +X100432979Y-117076900D01* +X100403217Y-117076900D01* +X100345026Y-117057993D01* +X100333213Y-117047903D01* +X99921146Y-116635835D01* +X99893369Y-116581319D01* +X99892150Y-116565832D01* +X99892150Y-115835821D01* +X99887439Y-115806085D01* +X99877528Y-115743502D01* +X99820830Y-115632227D01* +X99732523Y-115543920D01* +X99732520Y-115543918D01* +X99732521Y-115543918D01* +X99621251Y-115487223D01* +X99621248Y-115487222D01* +X99587753Y-115481917D01* +X99528929Y-115472600D01* +X99528926Y-115472600D01* +X98979374Y-115472600D01* +X98979371Y-115472600D01* +X98887052Y-115487222D01* +X98887048Y-115487223D01* +X98775779Y-115543918D01* +X98687468Y-115632229D01* +X98630773Y-115743498D01* +X98630772Y-115743502D01* +X98616150Y-115835821D01* +X98616150Y-116565831D01* +X98597243Y-116624022D01* +X98587154Y-116635835D01* +X98341685Y-116881304D01* +X98287168Y-116909081D01* +X98271681Y-116910300D01* +X97980780Y-116910300D01* +X97922589Y-116891393D01* +X97886625Y-116841893D01* +X97886625Y-116780707D01* +X97886805Y-116780160D01* +X97906506Y-116720703D01* +X97916650Y-116621423D01* +X97916650Y-116573101D01* +X97916649Y-116573100D01* +X97065650Y-116573100D01* +X97007459Y-116554193D01* +X96971495Y-116504693D01* +X96966650Y-116474100D01* +X96966650Y-116323101D01* +X96966649Y-116323100D01* +X96815650Y-116323100D01* +X96757459Y-116304193D01* +X96721495Y-116254693D01* +X96716650Y-116224100D01* +X96716650Y-115418369D01* +X96719118Y-115410771D01* +X96717869Y-115402882D01* +X96728393Y-115382226D01* +X96735557Y-115360178D01* +X96745646Y-115348365D01* +X96745910Y-115348101D01* +X97216650Y-115348101D01* +X97216650Y-116073099D01* +X97216651Y-116073100D01* +X97916648Y-116073100D01* +X97916649Y-116073099D01* +X97916649Y-116024777D01* +X97906507Y-115925502D01* +X97906504Y-115925490D01* +X97853195Y-115764612D01* +X97764224Y-115620370D01* +X97644379Y-115500525D01* +X97500137Y-115411554D01* +X97339253Y-115358243D01* +X97239973Y-115348100D01* +X97216651Y-115348100D01* +X97216650Y-115348101D01* +X96745910Y-115348101D01* +X98399515Y-113694496D01* +X98454032Y-113666719D01* +X98469519Y-113665500D01* +X102699579Y-113665500D01* +X102760395Y-113640309D01* +X102791647Y-113627364D01* +X103441414Y-112977595D01* +X103495931Y-112949819D01* +X103511418Y-112948600D01* +X103974907Y-112948600D01* +X103974910Y-112948600D01* +X104043043Y-112938673D01* +X104148133Y-112887298D01* +X104230848Y-112804583D01* +X104282223Y-112699493D01* +X104286805Y-112668047D01* +X104288222Y-112658325D01* +X104315322Y-112603469D01* +X104369490Y-112575018D01* +X104386187Y-112573600D01* +X105447113Y-112573600D01* +X105505304Y-112592507D01* +X105541268Y-112642007D01* +X105545078Y-112658325D01* +X105551076Y-112699492D01* +X105591561Y-112782305D01* +X105602452Y-112804583D01* +X105685167Y-112887298D01* +X105738935Y-112913583D01* +X105790254Y-112938672D01* +X105790255Y-112938672D01* +X105790257Y-112938673D01* +X105858390Y-112948600D01* +X105858393Y-112948600D01* +X106324907Y-112948600D01* +X106324910Y-112948600D01* +X106393043Y-112938673D01* +X106498133Y-112887298D01* +X106580848Y-112804583D01* +X106632223Y-112699493D01* +X106642150Y-112631360D01* +X106642150Y-112573101D01* +X106841651Y-112573101D01* +X106841651Y-112654682D01* +X106848058Y-112725203D01* +X106848060Y-112725209D01* +X106898629Y-112887492D01* +X106898632Y-112887500D01* +X106986574Y-113032972D01* +X107106777Y-113153175D01* +X107252249Y-113241117D01* +X107252257Y-113241120D01* +X107414539Y-113291689D01* +X107414545Y-113291691D01* +X107485075Y-113298098D01* +X107491650Y-113298098D01* +X107491650Y-112573101D01* +X107991650Y-112573101D01* +X107991650Y-113298098D01* +X107991651Y-113298099D01* +X107998216Y-113298099D01* +X107998232Y-113298098D01* +X108068753Y-113291691D01* +X108068759Y-113291689D01* +X108231042Y-113241120D01* +X108231050Y-113241117D01* +X108376522Y-113153175D01* +X108496725Y-113032972D01* +X108584667Y-112887500D01* +X108584670Y-112887492D01* +X108635239Y-112725210D01* +X108635241Y-112725204D01* +X108641649Y-112654681D01* +X108641650Y-112654668D01* +X108641650Y-112573101D01* +X108641649Y-112573100D01* +X107991651Y-112573100D01* +X107991650Y-112573101D01* +X107491650Y-112573101D01* +X107491649Y-112573100D01* +X106841652Y-112573100D01* +X106841651Y-112573101D01* +X106642150Y-112573101D01* +X106642150Y-112167867D01* +X106661057Y-112109676D01* +X106671135Y-112097874D01* +X106698778Y-112070231D01* +X106753293Y-112042456D01* +X106813725Y-112052027D01* +X106838784Y-112070233D01* +X106841651Y-112073100D01* +X107491649Y-112073100D01* +X107491650Y-112073099D01* +X107491650Y-111348101D01* +X107991650Y-111348101D01* +X107991650Y-112073099D01* +X107991651Y-112073100D01* +X108641648Y-112073100D01* +X108641649Y-112073099D01* +X108641649Y-111991533D01* +X108641648Y-111991517D01* +X108635241Y-111920996D01* +X108635239Y-111920990D01* +X108584670Y-111758707D01* +X108584667Y-111758699D01* +X108496725Y-111613227D01* +X108376522Y-111493024D01* +X108231050Y-111405082D01* +X108231042Y-111405079D01* +X108068760Y-111354510D01* +X108068754Y-111354508D01* +X107998231Y-111348100D01* +X107991651Y-111348100D01* +X107991650Y-111348101D01* +X107491650Y-111348101D01* +X107491648Y-111348099D01* +X107485075Y-111348100D01* +X107414546Y-111354508D01* +X107325546Y-111382242D01* +X107264365Y-111381502D01* +X107215304Y-111344942D01* +X107210365Y-111337235D01* +X107192439Y-111306187D01* +X107108563Y-111222311D01* +X107108560Y-111222309D01* +X107108558Y-111222307D01* +X107005839Y-111163002D01* +X107005840Y-111163002D01* +X106992301Y-111159374D01* +X106891259Y-111132300D01* +X106772641Y-111132300D01* +X106702517Y-111151089D01* +X106658059Y-111163002D01* +X106555341Y-111222307D01* +X106471457Y-111306191D01* +X106412152Y-111408909D01* +X106408666Y-111421919D01* +X106384919Y-111510547D01* +X106381450Y-111523492D01* +X106381450Y-111598600D01* +X106362543Y-111656791D01* +X106313043Y-111692755D01* +X106282450Y-111697600D01* +X105858390Y-111697600D01* +X105825247Y-111702429D01* +X105790254Y-111707527D01* +X105685168Y-111758901D01* +X105602451Y-111841618D01* +X105551076Y-111946707D01* +X105545078Y-111987875D01* +X105517978Y-112042731D01* +X105463810Y-112071182D01* +X105447113Y-112072600D01* +X104386187Y-112072600D01* +X104327996Y-112053693D01* +X104292032Y-112004193D01* +X104288222Y-111987875D01* +X104282223Y-111946707D01* +X104275445Y-111932843D01* +X104230848Y-111841617D01* +X104148133Y-111758902D01* +X104128492Y-111749300D01* +X104043045Y-111707527D01* +X104008053Y-111702429D01* +X103974910Y-111697600D01* +X103508390Y-111697600D01* +X103475247Y-111702429D01* +X103440254Y-111707527D01* +X103335168Y-111758901D01* +X103252451Y-111841618D01* +X103201077Y-111946704D01* +X103198488Y-111964473D01* +X103191151Y-112014837D01* +X103191150Y-112014843D01* +X103191150Y-112478331D01* +X103172243Y-112536522D01* +X103162151Y-112548337D01* +X103146802Y-112563685D01* +X103092285Y-112591461D01* +X103031853Y-112581887D01* +X102988590Y-112538621D01* +X102979020Y-112478189D01* +X102979703Y-112474364D01* +X102981067Y-112467507D01* +X102992150Y-112411791D01* +X102992150Y-109195818D01* +X102999686Y-109157932D01* +X103056545Y-109020666D01* +X103091150Y-108846692D01* +X103091150Y-108669308D01* +X103056545Y-108495334D01* +X102988662Y-108331453D01* +X102890114Y-108183964D01* +X102823751Y-108117601D01* +X102795976Y-108063087D01* +X102805547Y-108002655D01* +X102848812Y-107959390D01* +X102893757Y-107948600D01* +X102924907Y-107948600D01* +X102924910Y-107948600D01* +X102993043Y-107938673D01* +X103098133Y-107887298D01* +X103180848Y-107804583D01* +X103232223Y-107699493D01* +X103242150Y-107631360D01* +X103242150Y-107167867D01* +X103261057Y-107109677D01* +X103271146Y-107097864D01* +X103354170Y-107014840D01* +X104491150Y-107014840D01* +X104491150Y-107631360D01* +X104497145Y-107672507D01* +X104501077Y-107699495D01* +X104538873Y-107776807D01* +X104552452Y-107804583D01* +X104635167Y-107887298D01* +X104688935Y-107913583D01* +X104740254Y-107938672D01* +X104740255Y-107938672D01* +X104740257Y-107938673D01* +X104808390Y-107948600D01* +X104808393Y-107948600D01* +X105274907Y-107948600D01* +X105274910Y-107948600D01* +X105343043Y-107938673D01* +X105448133Y-107887298D01* +X105530848Y-107804583D01* +X105582223Y-107699493D01* +X105592150Y-107631360D01* +X105592150Y-107573101D01* +X105791651Y-107573101D01* +X105791651Y-107654682D01* +X105798058Y-107725203D01* +X105798060Y-107725209D01* +X105848629Y-107887492D01* +X105848632Y-107887500D01* +X105936574Y-108032972D01* +X106056777Y-108153175D01* +X106202249Y-108241117D01* +X106202257Y-108241120D01* +X106364539Y-108291689D01* +X106364545Y-108291691D01* +X106435075Y-108298098D01* +X106441650Y-108298098D01* +X106441650Y-107573101D01* +X106941650Y-107573101D01* +X106941650Y-108298098D01* +X106941651Y-108298099D01* +X106948216Y-108298099D01* +X106948232Y-108298098D01* +X107018753Y-108291691D01* +X107018759Y-108291689D01* +X107181042Y-108241120D01* +X107181050Y-108241117D01* +X107326522Y-108153175D01* +X107446725Y-108032972D01* +X107534667Y-107887500D01* +X107534670Y-107887492D01* +X107585239Y-107725210D01* +X107585241Y-107725204D01* +X107591649Y-107654681D01* +X107591650Y-107654668D01* +X107591650Y-107573101D01* +X107591649Y-107573100D01* +X106941651Y-107573100D01* +X106941650Y-107573101D01* +X106441650Y-107573101D01* +X106441649Y-107573100D01* +X105791652Y-107573100D01* +X105791651Y-107573101D01* +X105592150Y-107573101D01* +X105592150Y-107014840D01* +X105582223Y-106946707D01* +X105561210Y-106903725D01* +X105558474Y-106884383D01* +X105551331Y-106866202D01* +X105554289Y-106854804D01* +X105552640Y-106843145D01* +X105561795Y-106825886D01* +X105566704Y-106806979D01* +X105575083Y-106800840D01* +X105581315Y-106789095D01* +X105613950Y-106768102D01* +X105619133Y-106766065D01* +X105654836Y-106756499D01* +X105679015Y-106742538D01* +X105685900Y-106739834D01* +X105709413Y-106738416D01* +X105732448Y-106733520D01* +X105739389Y-106736610D01* +X105746975Y-106736153D01* +X105766829Y-106748826D01* +X105788344Y-106758405D01* +X105792143Y-106764984D01* +X105798549Y-106769074D01* +X105807163Y-106790999D01* +X105818938Y-106811393D01* +X105818540Y-106819959D01* +X105820923Y-106826022D01* +X105817681Y-106838510D01* +X105816619Y-106861430D01* +X105798060Y-106920986D01* +X105798058Y-106920995D01* +X105791650Y-106991518D01* +X105791650Y-107073099D01* +X105791651Y-107073100D01* +X106441649Y-107073100D01* +X106441650Y-107073099D01* +X106441650Y-106348101D01* +X106941650Y-106348101D01* +X106941650Y-107073099D01* +X106941651Y-107073100D01* +X107591648Y-107073100D01* +X107591649Y-107073099D01* +X107591649Y-106991533D01* +X107591648Y-106991517D01* +X107585241Y-106920996D01* +X107585239Y-106920990D01* +X107534670Y-106758707D01* +X107534667Y-106758699D01* +X107446725Y-106613227D01* +X107326522Y-106493024D01* +X107181050Y-106405082D01* +X107181042Y-106405079D01* +X107018760Y-106354510D01* +X107018754Y-106354508D01* +X106948231Y-106348100D01* +X106941651Y-106348100D01* +X106941650Y-106348101D01* +X106441650Y-106348101D01* +X106441648Y-106348099D01* +X106435075Y-106348100D01* +X106364546Y-106354508D01* +X106364540Y-106354510D01* +X106202257Y-106405079D01* +X106202249Y-106405082D01* +X106081667Y-106477978D01* +X106022087Y-106491902D01* +X105965701Y-106468146D01* +X105934048Y-106415785D01* +X105931450Y-106393256D01* +X105931450Y-106277392D01* +X105930434Y-106273599D01* +X105900749Y-106162814D01* +X105900747Y-106162811D01* +X105900747Y-106162809D01* +X105841442Y-106060091D01* +X105841440Y-106060089D01* +X105841439Y-106060087D01* +X105757563Y-105976211D01* +X105757560Y-105976209D01* +X105757558Y-105976207D01* +X105654839Y-105916902D01* +X105654840Y-105916902D01* +X105641301Y-105913274D01* +X105540259Y-105886200D01* +X105421641Y-105886200D01* +X105351517Y-105904989D01* +X105307059Y-105916902D01* +X105204341Y-105976207D01* +X105120457Y-106060091D01* +X105061152Y-106162809D01* +X105051563Y-106198597D01* +X105031467Y-106273598D01* +X105030450Y-106277392D01* +X105030450Y-106391931D01* +X105011543Y-106450122D01* +X105001458Y-106461929D01* +X104899753Y-106563636D01* +X104899752Y-106563635D01* +X104829286Y-106634102D01* +X104829285Y-106634103D01* +X104824163Y-106646470D01* +X104784425Y-106692995D01* +X104746979Y-106706547D01* +X104740259Y-106707526D01* +X104635168Y-106758901D01* +X104552451Y-106841618D01* +X104501077Y-106946704D01* +X104501077Y-106946707D01* +X104491150Y-107014840D01* +X103354170Y-107014840D01* +X104693714Y-105675296D01* +X104748231Y-105647519D01* +X104763718Y-105646300D01* +X112729886Y-105646300D01* +X112788077Y-105665207D01* +X112824041Y-105714707D01* +X112824041Y-105775893D01* +X112815622Y-105794801D01* +X112771852Y-105870611D01* +X112771851Y-105870613D01* +X112771851Y-105870614D01* +X112741150Y-105985191D01* +X112741150Y-106103809D01* +X112759716Y-106173098D01* +X112771852Y-106218390D01* +X112831157Y-106321108D01* +X112831159Y-106321110D01* +X112831161Y-106321113D01* +X112851278Y-106341230D01* +X112879054Y-106395745D01* +X112869483Y-106456177D01* +X112826218Y-106499442D01* +X112819159Y-106502696D01* +X112765103Y-106525086D01* +X112617615Y-106623635D01* +X112492185Y-106749065D01* +X112393635Y-106896554D01* +X112393635Y-106896555D01* +X112325756Y-107060432D01* +X112325756Y-107060434D01* +X112291150Y-107234406D01* +X112291150Y-107411793D01* +X112307466Y-107493818D01* +X112325106Y-107582500D01* +X112325756Y-107585765D01* +X112325756Y-107585767D01* +X112393635Y-107749644D01* +X112393635Y-107749645D01* +X112488347Y-107891390D01* +X112492186Y-107897135D01* +X112617615Y-108022564D01* +X112765103Y-108121113D01* +X112928984Y-108188994D01* +X113102959Y-108223600D01* +X113102960Y-108223600D01* +X113280340Y-108223600D01* +X113280341Y-108223600D01* +X113454316Y-108188994D01* +X113618197Y-108121113D01* +X113765685Y-108022564D01* +X113891114Y-107897135D01* +X113989663Y-107749647D01* +X114057544Y-107585766D01* +X114092150Y-107411791D01* +X114092150Y-107234409D01* +X114057544Y-107060434D01* +X113989664Y-106896555D01* +X113989664Y-106896554D01* +X113891114Y-106749065D01* +X113765684Y-106623635D01* +X113618194Y-106525085D01* +X113564141Y-106502696D01* +X113517615Y-106462960D01* +X113503331Y-106403465D01* +X113526746Y-106346937D01* +X113532011Y-106341240D01* +X113552139Y-106321113D01* +X113568632Y-106292546D01* +X113611447Y-106218390D01* +X113611447Y-106218388D01* +X113611449Y-106218386D01* +X113642150Y-106103809D01* +X113642150Y-105985191D01* +X113611449Y-105870614D01* +X113567678Y-105794801D01* +X113554956Y-105734952D01* +X113579842Y-105679057D01* +X113632830Y-105648464D01* +X113653414Y-105646300D01* +X115315841Y-105646300D01* +X115374032Y-105665207D01* +X115385838Y-105675290D01* +X115466837Y-105756289D01* +X115466839Y-105756290D01* +X115466841Y-105756292D01* +X115569560Y-105815597D01* +X115569561Y-105815597D01* +X115569564Y-105815599D01* +X115684141Y-105846300D01* +X115684143Y-105846300D01* +X115802757Y-105846300D01* +X115802759Y-105846300D01* +X115917336Y-105815599D01* +X115917338Y-105815597D01* +X115917340Y-105815597D01* +X116020058Y-105756292D01* +X116020058Y-105756291D01* +X116020063Y-105756289D01* +X116103939Y-105672413D01* +X116104120Y-105672100D01* +X116163247Y-105569690D01* +X116163247Y-105569688D01* +X116163249Y-105569686D01* +X116193950Y-105455109D01* +X116193950Y-105336491D01* +X116163249Y-105221914D01* +X116163247Y-105221911D01* +X116163247Y-105221909D01* +X116103942Y-105119191D01* +X116103940Y-105119189D01* +X116103939Y-105119187D01* +X116020063Y-105035311D01* +X116020060Y-105035309D01* +X116020058Y-105035307D01* +X115917339Y-104976002D01* +X115917340Y-104976002D01* +X115874757Y-104964592D01* +X115802759Y-104945300D01* +X115684141Y-104945300D01* +X115614017Y-104964089D01* +X115569559Y-104976002D01* +X115466841Y-105035307D01* +X115466840Y-105035308D01* +X115466837Y-105035310D01* +X115466837Y-105035311D01* +X115385842Y-105116305D01* +X115331328Y-105144081D01* +X115315841Y-105145300D01* +X104569121Y-105145300D01* +X104477053Y-105183435D01* +X104406585Y-105253902D01* +X104406586Y-105253903D01* +X104406585Y-105253904D01* +X102991884Y-106668604D01* +X102937367Y-106696381D01* +X102921880Y-106697600D01* +X102458390Y-106697600D01* +X102428301Y-106701984D01* +X102390254Y-106707527D01* +X102349930Y-106727241D01* +X102289348Y-106735812D01* +X102235298Y-106707136D01* +X102208426Y-106652168D01* +X102207450Y-106638300D01* +X102207450Y-105471807D01* +X102226357Y-105413616D01* +X102236440Y-105401809D01* +X104741114Y-102897136D01* +X104803302Y-102804064D01* +X104839663Y-102749647D01* +X104868441Y-102680171D01* +X104907545Y-102585766D01* +X104942150Y-102411792D01* +X104942150Y-102234408D01* +X104942150Y-98687509D01* +X104933916Y-98646114D01* +X104907545Y-98513534D01* +X104847884Y-98369500D01* +X104839663Y-98349653D01* +X104757776Y-98227101D01* +X104741168Y-98168213D01* +X104762346Y-98110810D01* +X104813219Y-98076817D01* +X104840092Y-98073100D01* +X105004149Y-98073100D01* +X105004150Y-98073099D01* +X105004150Y-97523101D01* +X105004149Y-97523100D01* +X104103057Y-97523100D01* +X104044866Y-97504193D01* +X104033053Y-97494104D01* +X103667457Y-97128508D01* +X103562049Y-97023100D01* +X104019354Y-97023100D01* +X105004149Y-97023100D01* +X105004150Y-97023099D01* +X105004150Y-96473101D01* +X105004149Y-96473100D01* +X104601013Y-96473100D01* +X104564160Y-96475999D01* +X104406449Y-96521819D01* +X104406448Y-96521819D01* +X104265097Y-96605414D01* +X104148964Y-96721547D01* +X104065369Y-96862898D01* +X104065369Y-96862899D01* +X104019551Y-97020606D01* +X104019549Y-97020613D01* +X104019354Y-97023100D01* +X103562049Y-97023100D01* +X103447841Y-96908892D01* +X102314646Y-95775696D01* +X102286869Y-95721179D01* +X102285650Y-95705692D01* +X102285650Y-95583058D01* +X102304557Y-95524867D01* +X102354057Y-95488903D01* +X102415243Y-95488903D01* +X102464743Y-95524867D01* +X102480275Y-95557432D01* +X102494297Y-95609759D01* +X102501352Y-95636090D01* +X102560657Y-95738808D01* +X102560659Y-95738810D01* +X102560661Y-95738813D01* +X102644537Y-95822689D01* +X102644539Y-95822690D01* +X102644541Y-95822692D01* +X102747260Y-95881997D01* +X102747261Y-95881997D01* +X102747264Y-95881999D01* +X102861841Y-95912700D01* +X102861843Y-95912700D01* +X102980457Y-95912700D01* +X102980459Y-95912700D01* +X103095036Y-95881999D01* +X103095038Y-95881997D01* +X103095040Y-95881997D01* +X103197758Y-95822692D01* +X103197758Y-95822691D01* +X103197763Y-95822689D01* +X103278757Y-95741694D01* +X103333272Y-95713919D01* +X103348759Y-95712700D01* +X104390271Y-95712700D01* +X104448462Y-95731607D01* +X104460274Y-95741696D01* +X104477788Y-95759209D01* +X104493885Y-95775306D01* +X104596659Y-95820685D01* +X104621785Y-95823600D01* +X105886514Y-95823599D01* +X105911641Y-95820685D01* +X106014415Y-95775306D01* +X106093856Y-95695865D01* +X106139235Y-95593091D01* +X106142150Y-95567965D01* +X106142149Y-95178236D01* +X106139235Y-95153109D01* +X106115470Y-95099288D01* +X106109262Y-95038419D01* +X106140018Y-94985525D01* +X106195989Y-94960811D01* +X106206035Y-94960300D01* +X107996042Y-94960300D01* +X108054233Y-94979207D01* +X108066046Y-94989296D01* +X108634446Y-95557696D01* +X108662223Y-95612213D01* +X108652652Y-95672645D01* +X108609387Y-95715910D01* +X108564442Y-95726700D01* +X107408842Y-95726700D01* +X107370957Y-95719164D01* +X107318894Y-95697599D01* +X107193221Y-95672601D01* +X107193219Y-95672601D01* +X107065081Y-95672601D01* +X107065078Y-95672601D01* +X106939406Y-95697599D01* +X106939404Y-95697599D01* +X106821025Y-95746633D01* +X106714480Y-95817823D01* +X106688698Y-95843605D01* +X106634181Y-95871381D01* +X106618697Y-95872600D01* +X106496788Y-95872600D01* +X106496785Y-95872601D01* +X106471659Y-95875514D01* +X106368885Y-95920894D01* +X106289444Y-96000335D01* +X106244064Y-96103111D01* +X106241150Y-96128230D01* +X106241150Y-96431386D01* +X106222243Y-96489577D01* +X106172743Y-96525541D01* +X106111557Y-96525541D01* +X106102841Y-96522248D01* +X106101847Y-96521818D01* +X105944139Y-96475999D01* +X105907287Y-96473100D01* +X105504151Y-96473100D01* +X105504150Y-96473101D01* +X105504150Y-98073099D01* +X105504151Y-98073100D01* +X105907287Y-98073100D01* +X105944139Y-98070200D01* +X106101846Y-98024382D01* +X106103850Y-98023197D01* +X106105374Y-98022856D01* +X106107568Y-98021907D01* +X106107748Y-98022325D01* +X106163561Y-98009847D01* +X106219716Y-98034143D01* +X106250865Y-98086806D01* +X106253250Y-98108408D01* +X106253250Y-101677324D01* +X106234343Y-101735515D01* +X106184843Y-101771479D01* +X106123657Y-101771479D01* +X106105574Y-101762359D01* +X106105503Y-101762505D01* +X105993045Y-101707527D01* +X105958053Y-101702429D01* +X105924910Y-101697600D01* +X105458390Y-101697600D01* +X105425247Y-101702429D01* +X105390254Y-101707527D01* +X105285168Y-101758901D01* +X105202451Y-101841618D01* +X105151077Y-101946704D01* +X105146358Y-101979096D01* +X105141150Y-102014840D01* +X105141150Y-102631360D01* +X105143215Y-102645531D01* +X105151077Y-102699495D01* +X105192345Y-102783909D01* +X105202452Y-102804583D01* +X105285167Y-102887298D01* +X105323769Y-102906169D01* +X105390254Y-102938672D01* +X105390255Y-102938672D01* +X105390257Y-102938673D01* +X105458390Y-102948600D01* +X105458393Y-102948600D01* +X105924907Y-102948600D01* +X105924910Y-102948600D01* +X105993043Y-102938673D01* +X106098133Y-102887298D01* +X106180848Y-102804583D01* +X106232223Y-102699493D01* +X106233745Y-102689047D01* +X106238222Y-102658325D01* +X106265322Y-102603469D01* +X106319490Y-102575018D01* +X106336187Y-102573600D01* +X106453922Y-102573600D01* +X106897113Y-102573600D01* +X106955304Y-102592507D01* +X106991268Y-102642007D01* +X106995078Y-102658325D01* +X107001076Y-102699492D01* +X107036817Y-102772601D01* +X107052452Y-102804583D01* +X107135167Y-102887298D01* +X107173769Y-102906169D01* +X107240254Y-102938672D01* +X107240255Y-102938672D01* +X107240257Y-102938673D01* +X107308390Y-102948600D01* +X107308393Y-102948600D01* +X107774907Y-102948600D01* +X107774910Y-102948600D01* +X107843043Y-102938673D01* +X107948133Y-102887298D01* +X108030848Y-102804583D01* +X108082223Y-102699493D01* +X108092150Y-102631360D01* +X108092150Y-102573101D01* +X108291651Y-102573101D01* +X108291651Y-102654682D01* +X108298058Y-102725203D01* +X108298060Y-102725209D01* +X108348629Y-102887492D01* +X108348632Y-102887500D01* +X108436574Y-103032972D01* +X108556777Y-103153175D01* +X108702249Y-103241117D01* +X108702257Y-103241120D01* +X108864539Y-103291689D01* +X108864545Y-103291691D01* +X108935075Y-103298098D01* +X108941650Y-103298098D01* +X108941650Y-102573101D01* +X109441650Y-102573101D01* +X109441650Y-103298098D01* +X109441651Y-103298099D01* +X109448216Y-103298099D01* +X109448232Y-103298098D01* +X109518753Y-103291691D01* +X109518759Y-103291689D01* +X109681042Y-103241120D01* +X109681050Y-103241117D01* +X109826522Y-103153175D01* +X109946725Y-103032972D01* +X110034667Y-102887500D01* +X110034670Y-102887492D01* +X110085239Y-102725210D01* +X110085241Y-102725204D01* +X110091649Y-102654681D01* +X110091650Y-102654668D01* +X110091650Y-102573101D01* +X110091649Y-102573100D01* +X109441651Y-102573100D01* +X109441650Y-102573101D01* +X108941650Y-102573101D01* +X108941649Y-102573100D01* +X108291652Y-102573100D01* +X108291651Y-102573101D01* +X108092150Y-102573101D01* +X108092150Y-102014840D01* +X108088752Y-101991518D01* +X108291650Y-101991518D01* +X108291650Y-102073099D01* +X108291651Y-102073100D01* +X108941649Y-102073100D01* +X108941650Y-102073099D01* +X108941650Y-101348101D01* +X109441650Y-101348101D01* +X109441650Y-102073099D01* +X109441651Y-102073100D01* +X110091648Y-102073100D01* +X110091649Y-102073099D01* +X110091649Y-102014840D01* +X110991150Y-102014840D01* +X110991150Y-102631360D01* +X110993215Y-102645531D01* +X111001077Y-102699495D01* +X111042345Y-102783909D01* +X111052452Y-102804583D01* +X111135167Y-102887298D01* +X111173769Y-102906169D01* +X111240254Y-102938672D01* +X111240255Y-102938672D01* +X111240257Y-102938673D01* +X111308390Y-102948600D01* +X111308393Y-102948600D01* +X111771882Y-102948600D01* +X111830073Y-102967507D01* +X111841885Y-102977596D01* +X111978884Y-103114594D01* +X112119485Y-103255195D01* +X112119486Y-103255197D01* +X112189953Y-103325664D01* +X112224773Y-103340087D01* +X112282023Y-103363801D01* +X112282024Y-103363801D01* +X112393201Y-103363801D01* +X112393209Y-103363800D01* +X113474241Y-103363800D01* +X113532432Y-103382707D01* +X113544238Y-103392790D01* +X113625237Y-103473789D01* +X113625239Y-103473790D01* +X113625241Y-103473792D01* +X113727960Y-103533097D01* +X113727961Y-103533097D01* +X113727964Y-103533099D01* +X113842541Y-103563800D01* +X113842543Y-103563800D01* +X113961157Y-103563800D01* +X113961159Y-103563800D01* +X114075736Y-103533099D01* +X114075738Y-103533097D01* +X114075740Y-103533097D01* +X114178458Y-103473792D01* +X114178458Y-103473791D01* +X114178463Y-103473789D01* +X114262339Y-103389913D01* +X114265721Y-103384055D01* +X114321647Y-103287190D01* +X114321647Y-103287188D01* +X114321649Y-103287186D01* +X114352350Y-103172609D01* +X114352350Y-103053991D01* +X114321649Y-102939414D01* +X114321647Y-102939411D01* +X114321647Y-102939409D01* +X114262342Y-102836691D01* +X114262340Y-102836689D01* +X114262339Y-102836687D01* +X114178463Y-102752811D01* +X114172983Y-102749647D01* +X114141149Y-102731267D01* +X114100209Y-102685797D01* +X114091650Y-102645531D01* +X114091650Y-102573101D01* +X114091649Y-102573100D01* +X113441651Y-102573100D01* +X113441650Y-102573101D01* +X113441650Y-102763800D01* +X113422743Y-102821991D01* +X113373243Y-102857955D01* +X113342650Y-102862800D01* +X113040650Y-102862800D01* +X112982459Y-102843893D01* +X112946495Y-102794393D01* +X112941650Y-102763800D01* +X112941650Y-102573101D01* +X112941649Y-102573100D01* +X112291650Y-102573100D01* +X112288782Y-102575968D01* +X112234265Y-102603744D01* +X112173834Y-102594172D01* +X112148778Y-102575967D01* +X112121145Y-102548334D01* +X112093369Y-102493817D01* +X112092150Y-102478332D01* +X112092150Y-102014840D01* +X112088752Y-101991518D01* +X112291650Y-101991518D01* +X112291650Y-102073099D01* +X112291651Y-102073100D01* +X112941649Y-102073100D01* +X112941650Y-102073099D01* +X112941650Y-101348101D01* +X113441650Y-101348101D01* +X113441650Y-102073099D01* +X113441651Y-102073100D01* +X114091648Y-102073100D01* +X114091649Y-102073099D01* +X114091649Y-101991533D01* +X114091648Y-101991517D01* +X114085241Y-101920996D01* +X114085239Y-101920990D01* +X114034670Y-101758707D01* +X114034667Y-101758699D01* +X113946725Y-101613227D01* +X113826522Y-101493024D01* +X113681050Y-101405082D01* +X113681042Y-101405079D01* +X113518760Y-101354510D01* +X113518754Y-101354508D01* +X113448231Y-101348100D01* +X113441651Y-101348100D01* +X113441650Y-101348101D01* +X112941650Y-101348101D01* +X112941648Y-101348099D01* +X112935075Y-101348100D01* +X112864546Y-101354508D01* +X112864540Y-101354510D01* +X112702257Y-101405079D01* +X112702249Y-101405082D01* +X112556777Y-101493024D01* +X112436574Y-101613227D01* +X112348632Y-101758699D01* +X112348629Y-101758707D01* +X112298060Y-101920989D01* +X112298058Y-101920995D01* +X112291650Y-101991518D01* +X112088752Y-101991518D01* +X112082223Y-101946707D01* +X112071430Y-101924630D01* +X112047678Y-101876044D01* +X112030848Y-101841617D01* +X111948133Y-101758902D01* +X111947718Y-101758699D01* +X111843045Y-101707527D01* +X111808053Y-101702429D01* +X111774910Y-101697600D01* +X111308390Y-101697600D01* +X111275247Y-101702429D01* +X111240254Y-101707527D01* +X111135168Y-101758901D01* +X111052451Y-101841618D01* +X111001077Y-101946704D01* +X110996358Y-101979096D01* +X110991150Y-102014840D01* +X110091649Y-102014840D01* +X110091649Y-101991533D01* +X110091648Y-101991517D01* +X110085241Y-101920996D01* +X110085239Y-101920990D01* +X110034670Y-101758707D01* +X110034667Y-101758699D01* +X109946725Y-101613227D01* +X109826522Y-101493024D01* +X109681050Y-101405082D01* +X109681042Y-101405079D01* +X109518760Y-101354510D01* +X109518754Y-101354508D01* +X109448231Y-101348100D01* +X109441651Y-101348100D01* +X109441650Y-101348101D01* +X108941650Y-101348101D01* +X108941648Y-101348099D01* +X108935075Y-101348100D01* +X108864546Y-101354508D01* +X108864540Y-101354510D01* +X108702257Y-101405079D01* +X108702249Y-101405082D01* +X108556777Y-101493024D01* +X108436574Y-101613227D01* +X108348632Y-101758699D01* +X108348629Y-101758707D01* +X108298060Y-101920989D01* +X108298058Y-101920995D01* +X108291650Y-101991518D01* +X108088752Y-101991518D01* +X108082223Y-101946707D01* +X108071430Y-101924630D01* +X108047678Y-101876044D01* +X108030848Y-101841617D01* +X107948133Y-101758902D01* +X107947718Y-101758699D01* +X107843045Y-101707527D01* +X107808053Y-101702429D01* +X107774910Y-101697600D01* +X107308390Y-101697600D01* +X107275247Y-101702429D01* +X107240254Y-101707527D01* +X107135168Y-101758901D01* +X107052451Y-101841618D01* +X107001076Y-101946707D01* +X106995078Y-101987875D01* +X106991268Y-101995587D01* +X106991268Y-102004193D01* +X106977984Y-102022476D01* +X106967978Y-102042731D01* +X106960362Y-102046731D01* +X106955304Y-102053693D01* +X106933812Y-102060675D01* +X106913810Y-102071182D01* +X106897113Y-102072600D01* +X106853250Y-102072600D01* +X106795059Y-102053693D01* +X106759095Y-102004193D01* +X106754250Y-101973600D01* +X106754250Y-97663909D01* +X106773157Y-97605718D01* +X106783240Y-97593911D01* +X106864239Y-97512913D01* +X106871028Y-97501154D01* +X106923547Y-97410190D01* +X106923547Y-97410188D01* +X106923549Y-97410186D01* +X106954250Y-97295609D01* +X106954250Y-97176991D01* +X106943915Y-97138420D01* +X106947116Y-97077321D01* +X106985621Y-97029770D01* +X107044721Y-97013934D01* +X107058852Y-97015699D01* +X107119181Y-97027700D01* +X107119182Y-97027700D01* +X108738418Y-97027700D01* +X108738419Y-97027700D01* +X108864094Y-97002701D01* +X108982477Y-96953665D01* +X109089019Y-96882476D01* +X109179626Y-96791869D01* +X109250815Y-96685327D01* +X109299851Y-96566944D01* +X109320765Y-96461803D01* +X109350661Y-96408422D01* +X109406226Y-96382806D01* +X109466235Y-96394743D01* +X109487866Y-96411116D01* +X110871458Y-97794707D01* +X110883769Y-97809709D01* +X110934743Y-97885997D01* +X110942186Y-97897135D01* +X111067615Y-98022564D01* +X111215103Y-98121113D01* +X111215104Y-98121113D01* +X111215105Y-98121114D01* +X111247739Y-98134631D01* +X111378984Y-98188994D01* +X111552959Y-98223600D01* +X111552960Y-98223600D01* +X111730340Y-98223600D01* +X111730341Y-98223600D01* +X111904316Y-98188994D01* +X112068197Y-98121113D01* +X112215685Y-98022564D01* +X112236240Y-98002008D01* +X112290754Y-97974231D01* +X112351186Y-97983801D01* +X112390502Y-98020036D01* +X112394076Y-98025830D01* +X112513920Y-98145674D01* +X112658162Y-98234645D01* +X112819046Y-98287956D01* +X112918326Y-98298099D01* +X112941650Y-98298098D01* +X112941650Y-97573101D01* +X113441650Y-97573101D01* +X113441650Y-98298098D01* +X113441651Y-98298099D01* +X113464972Y-98298099D01* +X113564247Y-98287957D01* +X113564259Y-98287954D01* +X113725137Y-98234645D01* +X113869379Y-98145674D01* +X113989224Y-98025829D01* +X114078195Y-97881587D01* +X114131506Y-97720703D01* +X114141650Y-97621423D01* +X114141650Y-97573101D01* +X114141649Y-97573100D01* +X113441651Y-97573100D01* +X113441650Y-97573101D01* +X112941650Y-97573101D01* +X112941650Y-97422100D01* +X112960557Y-97363909D01* +X113010057Y-97327945D01* +X113040650Y-97323100D01* +X113191649Y-97323100D01* +X113191650Y-97323099D01* +X113191650Y-97172100D01* +X113210557Y-97113909D01* +X113260057Y-97077945D01* +X113290650Y-97073100D01* +X114141648Y-97073100D01* +X114141649Y-97073099D01* +X114141649Y-97024777D01* +X114131507Y-96925502D01* +X114131504Y-96925490D01* +X114087847Y-96793740D01* +X114087491Y-96732556D01* +X114123166Y-96682847D01* +X114181246Y-96663602D01* +X114181822Y-96663600D01* +X118311196Y-96663600D01* +X118369387Y-96682507D01* +X118381199Y-96692596D01* +X118696981Y-97008377D01* +X118803519Y-97079563D01* +X118803521Y-97079564D01* +X118803524Y-97079566D01* +X118921907Y-97128601D01* +X119047581Y-97153600D01* +X119047582Y-97153600D01* +X119175718Y-97153600D01* +X119175719Y-97153600D01* +X119301394Y-97128601D01* +X119419777Y-97079566D01* +X119526320Y-97008377D01* +X119616927Y-96917770D01* +X119688116Y-96811227D01* +X119737151Y-96692844D01* +X119762150Y-96567169D01* +X119762150Y-96439031D01* +X119739842Y-96326885D01* +X119741907Y-96309436D01* +X119739159Y-96292084D01* +X119745413Y-96279808D01* +X119747033Y-96266126D01* +X119766934Y-96237572D01* +X119876911Y-96127596D01* +X119931428Y-96099819D01* +X119946914Y-96098600D01* +X120175129Y-96098600D01* +X120175130Y-96098600D01* +X120237259Y-96086242D01* +X120307715Y-96039165D01* +X120354792Y-95968709D01* +X120367150Y-95906580D01* +X120367150Y-95739620D01* +X120354792Y-95677491D01* +X120354792Y-95677490D01* +X120323968Y-95631360D01* +X120321790Y-95628100D01* +X120315882Y-95607153D01* +X120306184Y-95587670D01* +X120308046Y-95579368D01* +X120305182Y-95569214D01* +X120316321Y-95527330D01* +X120318800Y-95522574D01* +X120354792Y-95468709D01* +X120359669Y-95444189D01* +X120366218Y-95431629D01* +X120378436Y-95419637D01* +X120386800Y-95404702D01* +X120406512Y-95392083D01* +X120409886Y-95388772D01* +X120412229Y-95388423D01* +X120416118Y-95385934D01* +X120437828Y-95376941D01* +X120555324Y-95286784D01* +X120555334Y-95286774D01* +X120645494Y-95169275D01* +X120645494Y-95169274D01* +X120702171Y-95032442D01* +X120702172Y-95032442D01* +X120713276Y-94948100D01* +X119890650Y-94948100D01* +X119875738Y-94943255D01* +X119860057Y-94943255D01* +X119847371Y-94934038D01* +X119832459Y-94929193D01* +X119823242Y-94916507D01* +X119810557Y-94907291D01* +X119805711Y-94892378D01* +X119796495Y-94879693D01* +X119791650Y-94849100D01* +X119791650Y-94797100D01* +X119810557Y-94738909D01* +X119860057Y-94702945D01* +X119890650Y-94698100D01* +X120713276Y-94698100D01* +X120713276Y-94698099D01* +X120702171Y-94613757D01* +X120645494Y-94476925D01* +X120645494Y-94476924D01* +X120555334Y-94359425D01* +X120555324Y-94359415D01* +X120437828Y-94269257D01* +X120437826Y-94269256D01* +X120416117Y-94260264D01* +X120369591Y-94220527D01* +X120366219Y-94214570D01* +X120359668Y-94202005D01* +X120354792Y-94177491D01* +X120318805Y-94123632D01* +X120316322Y-94118870D01* +X120312100Y-94093743D01* +X120305182Y-94069214D01* +X120307025Y-94063539D01* +X120306184Y-94058530D01* +X120313295Y-94044242D01* +X120321791Y-94018098D01* +X120326801Y-94010601D01* +X120354792Y-93968709D01* +X120367150Y-93906580D01* +X120367150Y-93739620D01* +X120354792Y-93677491D01* +X120354792Y-93677490D01* +X120335269Y-93648273D01* +X120321790Y-93628100D01* +X120305182Y-93569214D01* +X120321791Y-93518098D01* +X120354792Y-93468709D01* +X120360716Y-93438927D01* +X120367150Y-93406580D01* +X120367150Y-93239620D01* +X120358057Y-93193904D01* +X120354792Y-93177490D01* +X120335269Y-93148273D01* +X120321790Y-93128100D01* +X120305182Y-93069214D01* +X120321791Y-93018098D01* +X120338354Y-92993311D01* +X120354792Y-92968709D01* +X120367150Y-92906580D01* +X120367150Y-92739620D01* +X120354792Y-92677491D01* +X120354792Y-92677490D01* +X120315922Y-92619318D01* +X120307715Y-92607035D01* +X120305891Y-92605816D01* +X120237259Y-92559957D01* +X120175132Y-92547600D01* +X120175130Y-92547600D01* +X119946915Y-92547600D01* +X119939317Y-92545131D01* +X119931428Y-92546381D01* +X119910772Y-92535856D01* +X119888724Y-92528693D01* +X119876911Y-92518604D01* +X119863077Y-92504770D01* +X119835300Y-92450253D01* +X119844871Y-92389821D01* +X119888136Y-92346556D01* +X119891595Y-92344961D01* +X119892990Y-92344215D01* +X119892997Y-92344213D01* +X119931166Y-92318709D01* +X120007634Y-92267615D01* +X120007635Y-92267614D01* +X120007642Y-92267609D01* +X120040486Y-92245664D01* +X120297146Y-91989002D01* +X120351663Y-91961225D01* +X120412095Y-91970796D01* +X120455360Y-92014061D01* +X120466150Y-92059006D01* +X120466150Y-92256582D01* +X120478507Y-92318709D01* +X120524740Y-92387901D01* +X120525585Y-92389165D01* +X120528252Y-92390947D01* +X120596040Y-92436242D01* +X120616561Y-92440323D01* +X120658170Y-92448600D01* +X120658171Y-92448600D01* +X120825129Y-92448600D01* +X120825130Y-92448600D01* +X120887259Y-92436242D01* +X120936649Y-92403240D01* +X120995536Y-92386632D01* +X121046650Y-92403240D01* +X121066823Y-92416719D01* +X121096040Y-92436242D01* +X121116561Y-92440323D01* +X121158170Y-92448600D01* +X121158171Y-92448600D01* +X121325129Y-92448600D01* +X121325130Y-92448600D01* +X121387259Y-92436242D01* +X121436649Y-92403240D01* +X121495536Y-92386632D01* +X121546650Y-92403240D01* +X121566823Y-92416719D01* +X121596040Y-92436242D01* +X121616561Y-92440323D01* +X121658170Y-92448600D01* +X121658171Y-92448600D01* +X121825129Y-92448600D01* +X121825130Y-92448600D01* +X121887259Y-92436242D01* +X121936649Y-92403240D01* +X121995536Y-92386632D01* +X122046650Y-92403240D01* +X122066823Y-92416719D01* +X122096040Y-92436242D01* +X122116561Y-92440323D01* +X122158170Y-92448600D01* +X122158171Y-92448600D01* +X122325129Y-92448600D01* +X122325130Y-92448600D01* +X122387259Y-92436242D01* +X122436649Y-92403240D01* +X122495536Y-92386632D01* +X122546650Y-92403240D01* +X122566823Y-92416719D01* +X122596040Y-92436242D01* +X122616561Y-92440323D01* +X122658170Y-92448600D01* +X122658171Y-92448600D01* +X122825129Y-92448600D01* +X122825130Y-92448600D01* +X122887259Y-92436242D01* +X122957715Y-92389165D01* +X123004792Y-92318709D01* +X123017150Y-92256580D01* +X123017150Y-91909469D01* +X123036057Y-91851278D01* +X123046146Y-91839466D01* +X123460437Y-91425174D01* +X123514954Y-91397396D01* +X123575386Y-91406967D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X192830800Y-114133423D02* +G01* +X192848971Y-114134376D01* +X192859182Y-114142645D01* +X192871684Y-114146707D01* +X192882382Y-114161431D01* +X192896521Y-114172881D01* +X192899921Y-114185572D01* +X192907648Y-114196207D01* +X192907648Y-114214406D01* +X192912357Y-114231981D01* +X192907648Y-114244248D01* +X192907648Y-114257393D01* +X192896950Y-114272117D01* +X192890430Y-114289103D01* +X192879409Y-114296259D01* +X192871684Y-114306893D01* +X192839118Y-114322425D01* +X192816768Y-114328414D01* +X192802259Y-114332302D01* +X192699541Y-114391607D01* +X192615657Y-114475491D01* +X192556352Y-114578209D01* +X192546786Y-114613909D01* +X192525650Y-114692791D01* +X192525650Y-114811409D01* +X192548409Y-114896346D01* +X192556352Y-114925990D01* +X192615657Y-115028708D01* +X192615659Y-115028710D01* +X192615661Y-115028713D01* +X192699537Y-115112589D01* +X192699539Y-115112590D01* +X192699541Y-115112592D01* +X192802260Y-115171897D01* +X192802258Y-115171897D01* +X192802262Y-115171898D01* +X192802264Y-115171899D01* +X192839117Y-115181773D01* +X192890430Y-115215097D01* +X192912357Y-115272219D01* +X192896521Y-115331319D01* +X192848971Y-115369824D01* +X192813493Y-115376400D01* +X189767013Y-115376400D01* +X189708822Y-115357493D01* +X189672858Y-115307993D01* +X189672858Y-115246807D01* +X189673038Y-115246260D01* +X189681506Y-115220703D01* +X189691650Y-115121423D01* +X189691650Y-115073101D01* +X189691649Y-115073100D01* +X188840650Y-115073100D01* +X188782459Y-115054193D01* +X188746495Y-115004693D01* +X188741650Y-114974100D01* +X188741650Y-114672100D01* +X188760557Y-114613909D01* +X188810057Y-114577945D01* +X188840650Y-114573100D01* +X189691648Y-114573100D01* +X189691649Y-114573099D01* +X189691649Y-114524777D01* +X189681507Y-114425502D01* +X189681504Y-114425490D01* +X189626383Y-114259143D01* +X189628807Y-114258339D01* +X189622615Y-114207912D01* +X189652278Y-114154397D01* +X189707730Y-114128538D01* +X189719797Y-114127800D01* +X192813493Y-114127800D01* +X192830800Y-114133423D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X179788868Y-101785207D02* +G01* +X179824832Y-101834707D01* +X179824832Y-101895893D01* +X179819618Y-101908780D01* +X179801077Y-101946704D01* +X179796358Y-101979096D01* +X179791150Y-102014840D01* +X179791150Y-102631360D01* +X179793215Y-102645531D01* +X179801077Y-102699495D01* +X179842345Y-102783909D01* +X179852452Y-102804583D01* +X179935167Y-102887298D01* +X179973769Y-102906169D01* +X180040254Y-102938672D01* +X180040255Y-102938672D01* +X180040257Y-102938673D01* +X180108390Y-102948600D01* +X180108393Y-102948600D01* +X180574907Y-102948600D01* +X180574910Y-102948600D01* +X180643043Y-102938673D01* +X180748133Y-102887298D01* +X180830848Y-102804583D01* +X180882223Y-102699493D01* +X180883745Y-102689047D01* +X180888222Y-102658325D01* +X180915322Y-102603469D01* +X180969490Y-102575018D01* +X180986187Y-102573600D01* +X188242141Y-102573600D01* +X188300332Y-102592507D01* +X188312138Y-102602590D01* +X188393137Y-102683589D01* +X188393139Y-102683590D01* +X188393141Y-102683592D01* +X188495860Y-102742897D01* +X188495861Y-102742897D01* +X188495864Y-102742899D01* +X188610441Y-102773600D01* +X188610443Y-102773600D01* +X188696828Y-102773600D01* +X188755019Y-102792507D01* +X188790983Y-102842007D01* +X188790983Y-102903193D01* +X188790803Y-102903740D01* +X188752143Y-103020406D01* +X188741650Y-103123112D01* +X188741650Y-103573099D01* +X188741651Y-103573100D01* +X190241649Y-103573100D01* +X190241650Y-103573099D01* +X190241650Y-102423101D01* +X190741650Y-102423101D01* +X190741650Y-103573099D01* +X190741651Y-103573100D01* +X192241648Y-103573100D01* +X192241649Y-103573099D01* +X192241649Y-103123113D01* +X192231157Y-103020412D01* +X192231154Y-103020400D01* +X192176006Y-102853975D01* +X192083969Y-102704759D01* +X191959990Y-102580780D01* +X191810774Y-102488743D01* +X191644343Y-102433593D01* +X191541637Y-102423100D01* +X190741651Y-102423100D01* +X190741650Y-102423101D01* +X190241650Y-102423101D01* +X190241649Y-102423100D01* +X189441663Y-102423100D01* +X189338962Y-102433592D01* +X189338950Y-102433595D01* +X189250390Y-102462941D01* +X189189205Y-102463297D01* +X189139497Y-102427622D01* +X189120252Y-102369542D01* +X189120250Y-102368966D01* +X189120250Y-102263792D01* +X189118975Y-102259032D01* +X189089549Y-102149214D01* +X189089547Y-102149211D01* +X189089547Y-102149209D01* +X189030242Y-102046491D01* +X189030240Y-102046489D01* +X189030239Y-102046487D01* +X188946363Y-101962611D01* +X188946360Y-101962609D01* +X188946358Y-101962607D01* +X188926316Y-101951036D01* +X188885375Y-101905567D01* +X188878979Y-101844716D01* +X188909572Y-101791728D01* +X188965468Y-101766842D01* +X188975816Y-101766300D01* +X197761928Y-101766300D01* +X197820119Y-101785207D01* +X197856083Y-101834707D01* +X197856083Y-101895893D01* +X197850137Y-101910246D01* +X197831004Y-101947795D01* +X197816150Y-102041577D01* +X197816150Y-102604620D01* +X197816151Y-102604623D01* +X197831002Y-102698399D01* +X197831004Y-102698404D01* +X197888600Y-102811442D01* +X197978308Y-102901150D01* +X198091346Y-102958746D01* +X198185131Y-102973600D01* +X198593896Y-102973599D01* +X198652087Y-102992506D01* +X198663899Y-103002595D01* +X198912653Y-103251349D01* +X198940431Y-103305865D01* +X198941650Y-103321352D01* +X198941650Y-105223098D01* +X198941651Y-105223099D01* +X199216636Y-105223099D01* +X199319337Y-105212607D01* +X199319349Y-105212604D01* +X199414110Y-105181204D01* +X199475294Y-105180848D01* +X199525003Y-105216523D01* +X199544248Y-105274603D01* +X199544250Y-105275179D01* +X199544250Y-108793100D01* +X199525343Y-108851291D01* +X199475843Y-108887255D01* +X199445250Y-108892100D01* +X191089380Y-108892100D01* +X190963705Y-108917099D01* +X190942669Y-108925813D01* +X190942668Y-108925813D01* +X190845326Y-108966132D01* +X190738784Y-109037320D01* +X189422900Y-110353204D01* +X189415782Y-110356830D01* +X189411087Y-110363293D01* +X189389038Y-110370456D01* +X189368383Y-110380981D01* +X189352896Y-110382200D01* +X189342105Y-110382200D01* +X189283914Y-110363293D01* +X189247950Y-110313793D01* +X189247950Y-110252607D01* +X189253164Y-110239719D01* +X189281516Y-110181725D01* +X189292150Y-110108736D01* +X189292150Y-110092893D01* +X189299686Y-110055007D01* +X189317151Y-110012844D01* +X189342150Y-109887169D01* +X189342150Y-107551931D01* +X189342150Y-105959031D01* +X189317151Y-105833356D01* +X189268115Y-105714973D01* +X189196927Y-105608431D01* +X187921145Y-104332649D01* +X187893368Y-104278132D01* +X187892149Y-104262645D01* +X187892149Y-104073101D01* +X188741651Y-104073101D01* +X188741651Y-104523086D01* +X188752142Y-104625787D01* +X188752145Y-104625799D01* +X188807293Y-104792224D01* +X188899330Y-104941440D01* +X189023309Y-105065419D01* +X189172525Y-105157456D01* +X189338956Y-105212606D01* +X189441662Y-105223099D01* +X190241648Y-105223099D01* +X190241650Y-105223098D01* +X190241650Y-104073101D01* +X190741650Y-104073101D01* +X190741650Y-105223098D01* +X190741651Y-105223099D01* +X191541636Y-105223099D01* +X191644337Y-105212607D01* +X191644349Y-105212604D01* +X191810774Y-105157456D01* +X191959990Y-105065419D01* +X192083969Y-104941440D01* +X192176006Y-104792224D01* +X192231156Y-104625793D01* +X192241650Y-104523087D01* +X192241650Y-104473101D01* +X197466651Y-104473101D01* +X197466651Y-104523086D01* +X197477142Y-104625787D01* +X197477145Y-104625799D01* +X197532293Y-104792224D01* +X197624330Y-104941440D01* +X197748309Y-105065419D01* +X197897525Y-105157456D01* +X198063956Y-105212606D01* +X198166663Y-105223099D01* +X198441648Y-105223099D01* +X198441650Y-105223098D01* +X198441650Y-104473101D01* +X198441649Y-104473100D01* +X197466652Y-104473100D01* +X197466651Y-104473101D01* +X192241650Y-104473101D01* +X192241650Y-104073101D01* +X192241649Y-104073100D01* +X190741651Y-104073100D01* +X190741650Y-104073101D01* +X190241650Y-104073101D01* +X190241649Y-104073100D01* +X188741652Y-104073100D01* +X188741651Y-104073101D01* +X187892149Y-104073101D01* +X187892149Y-103923112D01* +X197466650Y-103923112D01* +X197466650Y-103973099D01* +X197466651Y-103973100D01* +X198441649Y-103973100D01* +X198441650Y-103973099D01* +X198441650Y-103223101D01* +X198441649Y-103223100D01* +X198166663Y-103223100D01* +X198063962Y-103233592D01* +X198063950Y-103233595D01* +X197897525Y-103288743D01* +X197748309Y-103380780D01* +X197624330Y-103504759D01* +X197532293Y-103653975D01* +X197477143Y-103820406D01* +X197466650Y-103923112D01* +X187892149Y-103923112D01* +X187892149Y-103141578D01* +X187892148Y-103141576D01* +X187877297Y-103047800D01* +X187877296Y-103047798D01* +X187877296Y-103047796D01* +X187819700Y-102934758D01* +X187729992Y-102845050D01* +X187616954Y-102787454D01* +X187616955Y-102787454D01* +X187523171Y-102772600D01* +X185460128Y-102772600D01* +X185460126Y-102772601D01* +X185366350Y-102787452D01* +X185366345Y-102787454D01* +X185253309Y-102845049D01* +X185163599Y-102934759D01* +X185106004Y-103047795D01* +X185091150Y-103141578D01* +X185091150Y-104504621D01* +X185091151Y-104504623D01* +X185106002Y-104598399D01* +X185106004Y-104598404D01* +X185163600Y-104711442D01* +X185253308Y-104801150D01* +X185366346Y-104858746D01* +X185460131Y-104873600D01* +X186581195Y-104873599D01* +X186639386Y-104892506D01* +X186651199Y-104902595D01* +X188012154Y-106263550D01* +X188039931Y-106318067D01* +X188041150Y-106333554D01* +X188041150Y-109887169D01* +X188066149Y-110012844D01* +X188083614Y-110055007D01* +X188088018Y-110068186D01* +X188091150Y-110080338D01* +X188091150Y-110108736D01* +X188101784Y-110181725D01* +X188134553Y-110248756D01* +X188137063Y-110258493D01* +X188135761Y-110279481D01* +X188138707Y-110300301D01* +X188133909Y-110309343D01* +X188133276Y-110319562D01* +X188119885Y-110335777D01* +X188110032Y-110354351D01* +X188100835Y-110358846D01* +X188094317Y-110366741D01* +X188073955Y-110371988D01* +X188055064Y-110381224D01* +X188041195Y-110382200D01* +X187792105Y-110382200D01* +X187733914Y-110363293D01* +X187697950Y-110313793D01* +X187697950Y-110252607D01* +X187703164Y-110239719D01* +X187731516Y-110181725D01* +X187742150Y-110108736D01* +X187742150Y-109537464D01* +X187731516Y-109464475D01* +X187676476Y-109351889D01* +X187587861Y-109263274D01* +X187475275Y-109208234D01* +X187467933Y-109205966D01* +X187468446Y-109204305D01* +X187422009Y-109181357D01* +X187393566Y-109127184D01* +X187392150Y-109110501D01* +X187392150Y-108145109D01* +X187411057Y-108086918D01* +X187421140Y-108075111D01* +X187502139Y-107994113D01* +X187534148Y-107938672D01* +X187561447Y-107891390D01* +X187561447Y-107891388D01* +X187561449Y-107891386D01* +X187592150Y-107776809D01* +X187592150Y-107658191D01* +X187561449Y-107543614D01* +X187561447Y-107543611D01* +X187561447Y-107543609D01* +X187502142Y-107440891D01* +X187502140Y-107440889D01* +X187502139Y-107440887D01* +X187418263Y-107357011D01* +X187418260Y-107357009D01* +X187418258Y-107357007D01* +X187315539Y-107297702D01* +X187315540Y-107297702D01* +X187302001Y-107294074D01* +X187200959Y-107267000D01* +X187082341Y-107267000D01* +X187012217Y-107285789D01* +X186967759Y-107297702D01* +X186865041Y-107357007D01* +X186781157Y-107440891D01* +X186721852Y-107543609D01* +X186710556Y-107585766D01* +X186691150Y-107658191D01* +X186691150Y-107776809D01* +X186709662Y-107845897D01* +X186721852Y-107891390D01* +X186781157Y-107994108D01* +X186781159Y-107994110D01* +X186781161Y-107994113D01* +X186862155Y-108075107D01* +X186889931Y-108129622D01* +X186891150Y-108145109D01* +X186891150Y-109110501D01* +X186872243Y-109168692D01* +X186822743Y-109204656D01* +X186809893Y-109207656D01* +X186808024Y-109208234D01* +X186695440Y-109263273D01* +X186606823Y-109351890D01* +X186551784Y-109464473D01* +X186551784Y-109464475D01* +X186542107Y-109530900D01* +X186541150Y-109537467D01* +X186541150Y-110078546D01* +X186522243Y-110136737D01* +X186472743Y-110172701D01* +X186411557Y-110172701D01* +X186372146Y-110148550D01* +X183065213Y-106841617D01* +X179757719Y-103534123D01* +X179756186Y-103533099D01* +X179651174Y-103462933D01* +X179532795Y-103413899D01* +X179528307Y-103413006D01* +X179523820Y-103412114D01* +X179481999Y-103403795D01* +X179421835Y-103391827D01* +X179368451Y-103361930D01* +X179342836Y-103306364D01* +X179342150Y-103294729D01* +X179342150Y-102259032D01* +X179342150Y-102259031D01* +X179317151Y-102133356D01* +X179268115Y-102014973D01* +X179268113Y-102014970D01* +X179268111Y-102014966D01* +X179247359Y-101983909D01* +X179238571Y-101967652D01* +X179233556Y-101955861D01* +X179232223Y-101946707D01* +X179212543Y-101906451D01* +X179211520Y-101904045D01* +X179209050Y-101876044D01* +X179205111Y-101848198D01* +X179206383Y-101845799D01* +X179206145Y-101843096D01* +X179220607Y-101818988D01* +X179233786Y-101794149D01* +X179236224Y-101792956D01* +X179237622Y-101790628D01* +X179263496Y-101779624D01* +X179288755Y-101767276D01* +X179293281Y-101766957D01* +X179293927Y-101766683D01* +X179294689Y-101766858D01* +X179302623Y-101766300D01* +X179730677Y-101766300D01* +X179788868Y-101785207D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X142895833Y-85402507D02* +G01* +X142907646Y-85412596D01* +X153832154Y-96337104D01* +X153859931Y-96391621D01* +X153861150Y-96407108D01* +X153861150Y-106416800D01* +X153842243Y-106474991D01* +X153792743Y-106510955D01* +X153762150Y-106515800D01* +X119564657Y-106515800D01* +X119506466Y-106496893D01* +X119494653Y-106486804D01* +X119000452Y-105992603D01* +X118972675Y-105938086D01* +X118982246Y-105877654D01* +X119025511Y-105834389D01* +X119070453Y-105823599D01* +X119548168Y-105823599D01* +X119548171Y-105823599D01* +X119548172Y-105823598D01* +X119598695Y-105815597D01* +X119641949Y-105808747D01* +X119641949Y-105808746D01* +X119641954Y-105808746D01* +X119754992Y-105751150D01* +X119844700Y-105661442D01* +X119902296Y-105548404D01* +X119917150Y-105454619D01* +X119917149Y-104888200D01* +X119933834Y-104833199D01* +X119989663Y-104749647D01* +X120057544Y-104585766D01* +X120060063Y-104573101D01* +X121066651Y-104573101D01* +X121066651Y-105473086D01* +X121077142Y-105575787D01* +X121077145Y-105575799D01* +X121132293Y-105742224D01* +X121224330Y-105891440D01* +X121348309Y-106015419D01* +X121497525Y-106107456D01* +X121663956Y-106162606D01* +X121766663Y-106173099D01* +X121891650Y-106173099D01* +X121891650Y-104573101D01* +X122391650Y-104573101D01* +X122391650Y-106173098D01* +X122391651Y-106173099D01* +X122516636Y-106173099D01* +X122619337Y-106162607D01* +X122619349Y-106162604D01* +X122785774Y-106107456D01* +X122934990Y-106015419D01* +X123058969Y-105891440D01* +X123151006Y-105742224D01* +X123206156Y-105575793D01* +X123216650Y-105473087D01* +X123216650Y-104573101D01* +X123216649Y-104573100D01* +X122391651Y-104573100D01* +X122391650Y-104573101D01* +X121891650Y-104573101D01* +X121891649Y-104573100D01* +X121066652Y-104573100D01* +X121066651Y-104573101D01* +X120060063Y-104573101D01* +X120071415Y-104516029D01* +X120077608Y-104504443D01* +X120077608Y-104501500D01* +X120089919Y-104481409D01* +X120098507Y-104465341D01* +X120897647Y-103666202D01* +X120952163Y-103638426D01* +X121012595Y-103647997D01* +X121055860Y-103691262D01* +X121066650Y-103736207D01* +X121066650Y-104073099D01* +X121066651Y-104073100D01* +X123216648Y-104073100D01* +X123216649Y-104073099D01* +X123216649Y-103173113D01* +X123206157Y-103070412D01* +X123206154Y-103070401D01* +X123188108Y-103015940D01* +X123187752Y-102954756D01* +X123223427Y-102905048D01* +X123281506Y-102885802D01* +X123282083Y-102885800D01* +X123692150Y-102885800D01* +X123750341Y-102904707D01* +X123786305Y-102954207D01* +X123791150Y-102984800D01* +X123791150Y-104411793D01* +X123809957Y-104506341D01* +X123818708Y-104550336D01* +X123825756Y-104585765D01* +X123825756Y-104585767D01* +X123893634Y-104749642D01* +X123893640Y-104749653D01* +X123949465Y-104833199D01* +X123966150Y-104888201D01* +X123966150Y-105454620D01* +X123966151Y-105454623D01* +X123981002Y-105548399D01* +X123981004Y-105548404D01* +X124038600Y-105661442D01* +X124128308Y-105751150D01* +X124241346Y-105808746D01* +X124335131Y-105823600D01* +X125048168Y-105823599D01* +X125048170Y-105823599D01* +X125048171Y-105823598D01* +X125098695Y-105815597D01* +X125141949Y-105808747D01* +X125141949Y-105808746D01* +X125141954Y-105808746D01* +X125254992Y-105751150D01* +X125344700Y-105661442D01* +X125402296Y-105548404D01* +X125417150Y-105454619D01* +X125417149Y-104888200D01* +X125433834Y-104833199D01* +X125489663Y-104749647D01* +X125557544Y-104585766D01* +X125560063Y-104573101D01* +X126566651Y-104573101D01* +X126566651Y-105473086D01* +X126577142Y-105575787D01* +X126577145Y-105575799D01* +X126632293Y-105742224D01* +X126724330Y-105891440D01* +X126848309Y-106015419D01* +X126997525Y-106107456D01* +X127163956Y-106162606D01* +X127266663Y-106173099D01* +X127391650Y-106173099D01* +X127391650Y-104573101D01* +X127891650Y-104573101D01* +X127891650Y-106173098D01* +X127891651Y-106173099D01* +X128016636Y-106173099D01* +X128119337Y-106162607D01* +X128119349Y-106162604D01* +X128285774Y-106107456D01* +X128434990Y-106015419D01* +X128558969Y-105891440D01* +X128651006Y-105742224D01* +X128706156Y-105575793D01* +X128716650Y-105473087D01* +X128716650Y-104573101D01* +X128716649Y-104573100D01* +X127891651Y-104573100D01* +X127891650Y-104573101D01* +X127391650Y-104573101D01* +X127391649Y-104573100D01* +X126566652Y-104573100D01* +X126566651Y-104573101D01* +X125560063Y-104573101D01* +X125592150Y-104411791D01* +X125592150Y-102984800D01* +X125611057Y-102926609D01* +X125660557Y-102890645D01* +X125691150Y-102885800D01* +X126501217Y-102885800D01* +X126559408Y-102904707D01* +X126595372Y-102954207D01* +X126595372Y-103015393D01* +X126595192Y-103015940D01* +X126577143Y-103070406D01* +X126566650Y-103173112D01* +X126566650Y-104073099D01* +X126566651Y-104073100D01* +X128716648Y-104073100D01* +X128716649Y-104073099D01* +X128716649Y-103565606D01* +X128735556Y-103507415D01* +X128785056Y-103471451D01* +X128846242Y-103471451D01* +X128885653Y-103495602D01* +X129112154Y-103722103D01* +X129139931Y-103776620D01* +X129141150Y-103792107D01* +X129141150Y-104411793D01* +X129159957Y-104506341D01* +X129168708Y-104550336D01* +X129175756Y-104585765D01* +X129175756Y-104585767D01* +X129243635Y-104749644D01* +X129243635Y-104749645D01* +X129342185Y-104897134D01* +X129433925Y-104988874D01* +X129452130Y-105013932D01* +X129463023Y-105035311D01* +X129463600Y-105036442D01* +X129553308Y-105126150D01* +X129666346Y-105183746D01* +X129760131Y-105198600D01* +X129817521Y-105198599D01* +X129836836Y-105200500D01* +X129952959Y-105223600D01* +X129952960Y-105223600D01* +X130130340Y-105223600D01* +X130130341Y-105223600D01* +X130246466Y-105200500D01* +X130265780Y-105198599D01* +X130323171Y-105198599D01* +X130323172Y-105198598D01* +X130370061Y-105191172D01* +X130416949Y-105183747D01* +X130416949Y-105183746D01* +X130416954Y-105183746D01* +X130529992Y-105126150D01* +X130619700Y-105036442D01* +X130631171Y-105013927D01* +X130645580Y-104992885D01* +X130647412Y-104990835D01* +X130741114Y-104897135D01* +X130770432Y-104853256D01* +X130775076Y-104848064D01* +X130795787Y-104836010D01* +X130814609Y-104821173D01* +X130821767Y-104820891D01* +X130827958Y-104817289D01* +X130851799Y-104819711D01* +X130875747Y-104818771D01* +X130881703Y-104822750D01* +X130888830Y-104823475D01* +X130906692Y-104839447D01* +X130926621Y-104852763D01* +X130929479Y-104859823D01* +X130934440Y-104864259D01* +X130938065Y-104881030D01* +X130947362Y-104903992D01* +X130952142Y-104950788D01* +X130952145Y-104950799D01* +X131007293Y-105117224D01* +X131099330Y-105266440D01* +X131223309Y-105390419D01* +X131372525Y-105482456D01* +X131538956Y-105537606D01* +X131641663Y-105548099D01* +X131691650Y-105548098D01* +X131691650Y-104573101D01* +X132191650Y-104573101D01* +X132191650Y-105548098D01* +X132191651Y-105548099D01* +X132241636Y-105548099D01* +X132344337Y-105537607D01* +X132344349Y-105537604D01* +X132510774Y-105482456D01* +X132659990Y-105390419D01* +X132783969Y-105266440D01* +X132876006Y-105117224D01* +X132931156Y-104950793D01* +X132941650Y-104848087D01* +X132941650Y-104573101D01* +X132941649Y-104573100D01* +X132191651Y-104573100D01* +X132191650Y-104573101D01* +X131691650Y-104573101D01* +X131691650Y-103098101D01* +X132191650Y-103098101D01* +X132191650Y-104073099D01* +X132191651Y-104073100D01* +X132941648Y-104073100D01* +X132941649Y-104073099D01* +X132941649Y-103974208D01* +X132960556Y-103916017D01* +X133010056Y-103880053D01* +X133071242Y-103880053D01* +X133110650Y-103904202D01* +X133152937Y-103946489D01* +X133152939Y-103946490D01* +X133152941Y-103946492D01* +X133255660Y-104005797D01* +X133255661Y-104005797D01* +X133255664Y-104005799D01* +X133370241Y-104036500D01* +X133370243Y-104036500D01* +X133484782Y-104036500D01* +X133492379Y-104038968D01* +X133500269Y-104037719D01* +X133520924Y-104048243D01* +X133542973Y-104055407D01* +X133554786Y-104065496D01* +X133587154Y-104097864D01* +X133614931Y-104152381D01* +X133616150Y-104167868D01* +X133616150Y-104631360D01* +X133617560Y-104641037D01* +X133626077Y-104699495D01* +X133671410Y-104792224D01* +X133677452Y-104804583D01* +X133760167Y-104887298D01* +X133801334Y-104907423D01* +X133865254Y-104938672D01* +X133865255Y-104938672D01* +X133865257Y-104938673D01* +X133933390Y-104948600D01* +X133933393Y-104948600D01* +X134399907Y-104948600D01* +X134399910Y-104948600D01* +X134468043Y-104938673D01* +X134573133Y-104887298D01* +X134655848Y-104804583D01* +X134707223Y-104699493D01* +X134717150Y-104631360D01* +X134717150Y-104014840D01* +X135266150Y-104014840D01* +X135266150Y-104631360D01* +X135267560Y-104641037D01* +X135276077Y-104699495D01* +X135321410Y-104792224D01* +X135327452Y-104804583D01* +X135410167Y-104887298D01* +X135451334Y-104907423D01* +X135515254Y-104938672D01* +X135515255Y-104938672D01* +X135515257Y-104938673D01* +X135583390Y-104948600D01* +X135583393Y-104948600D01* +X136049907Y-104948600D01* +X136049910Y-104948600D01* +X136118043Y-104938673D01* +X136223133Y-104887298D01* +X136305848Y-104804583D01* +X136357223Y-104699493D01* +X136358621Y-104689899D01* +X136363222Y-104658325D01* +X136390322Y-104603469D01* +X136444490Y-104575018D01* +X136461187Y-104573600D01* +X139685279Y-104573600D01* +X139755107Y-104544676D01* +X139777347Y-104535464D01* +X144552845Y-99759964D01* +X144552847Y-99759964D01* +X144623314Y-99689497D01* +X144661450Y-99597428D01* +X144661450Y-96987309D01* +X144663918Y-96979711D01* +X144662669Y-96971822D01* +X144673193Y-96951166D01* +X144676662Y-96940491D01* +X152606050Y-96940491D01* +X152606050Y-97059109D01* +X152631369Y-97153599D01* +X152636752Y-97173690D01* +X152696057Y-97276408D01* +X152696059Y-97276410D01* +X152696061Y-97276413D01* +X152779937Y-97360289D01* +X152779939Y-97360290D01* +X152779941Y-97360292D01* +X152882660Y-97419597D01* +X152882661Y-97419597D01* +X152882664Y-97419599D01* +X152997241Y-97450300D01* +X152997243Y-97450300D01* +X153115857Y-97450300D01* +X153115859Y-97450300D01* +X153230436Y-97419599D01* +X153230438Y-97419597D01* +X153230440Y-97419597D01* +X153333158Y-97360292D01* +X153333158Y-97360291D01* +X153333163Y-97360289D01* +X153417039Y-97276413D01* +X153419240Y-97272601D01* +X153476347Y-97173690D01* +X153476347Y-97173688D01* +X153476349Y-97173686D01* +X153507050Y-97059109D01* +X153507050Y-96940491D01* +X153476349Y-96825914D01* +X153476347Y-96825911D01* +X153476347Y-96825909D01* +X153417042Y-96723191D01* +X153417040Y-96723189D01* +X153417039Y-96723187D01* +X153333163Y-96639311D01* +X153333160Y-96639309D01* +X153333158Y-96639307D01* +X153230439Y-96580002D01* +X153230440Y-96580002D01* +X153208428Y-96574104D01* +X153115859Y-96549300D01* +X152997241Y-96549300D01* +X152931404Y-96566941D01* +X152882659Y-96580002D01* +X152779941Y-96639307D01* +X152696057Y-96723191D01* +X152636752Y-96825909D01* +X152629799Y-96851860D01* +X152606050Y-96940491D01* +X144676662Y-96940491D01* +X144680357Y-96929118D01* +X144690440Y-96917311D01* +X144771439Y-96836313D01* +X144771631Y-96835981D01* +X144830747Y-96733590D01* +X144830747Y-96733588D01* +X144830749Y-96733586D01* +X144861450Y-96619009D01* +X144861450Y-96500391D01* +X144830749Y-96385814D01* +X144830747Y-96385811D01* +X144830747Y-96385809D01* +X144771442Y-96283091D01* +X144771440Y-96283089D01* +X144771439Y-96283087D01* +X144687563Y-96199211D01* +X144687560Y-96199209D01* +X144687558Y-96199207D01* +X144584839Y-96139902D01* +X144584840Y-96139902D01* +X144538913Y-96127596D01* +X144470259Y-96109200D01* +X144351641Y-96109200D01* +X144303614Y-96122069D01* +X144237059Y-96139902D01* +X144134341Y-96199207D01* +X144050457Y-96283091D01* +X143991152Y-96385809D01* +X143977260Y-96437655D01* +X143960450Y-96500391D01* +X143960450Y-96619009D01* +X143982769Y-96702305D01* +X143991152Y-96733590D01* +X144050457Y-96836308D01* +X144050459Y-96836310D01* +X144050461Y-96836313D01* +X144131455Y-96917307D01* +X144159231Y-96971822D01* +X144160450Y-96987309D01* +X144160450Y-99402831D01* +X144141543Y-99461022D01* +X144131454Y-99472835D01* +X139560685Y-104043604D01* +X139506168Y-104071381D01* +X139490681Y-104072600D01* +X136461187Y-104072600D01* +X136402996Y-104053693D01* +X136367032Y-104004193D01* +X136363222Y-103987875D01* +X136357223Y-103946707D01* +X136331591Y-103894276D01* +X136305848Y-103841617D01* +X136223133Y-103758902D01* +X136207172Y-103751099D01* +X136118045Y-103707527D01* +X136083053Y-103702429D01* +X136049910Y-103697600D01* +X135583390Y-103697600D01* +X135550247Y-103702429D01* +X135515254Y-103707527D01* +X135410168Y-103758901D01* +X135327451Y-103841618D01* +X135276077Y-103946704D01* +X135272070Y-103974208D01* +X135266150Y-104014840D01* +X134717150Y-104014840D01* +X134707223Y-103946707D01* +X134707116Y-103946489D01* +X134681591Y-103894276D01* +X134655848Y-103841617D01* +X134573133Y-103758902D01* +X134557172Y-103751099D01* +X134468045Y-103707527D01* +X134433053Y-103702429D01* +X134399910Y-103697600D01* +X133979050Y-103697600D01* +X133920859Y-103678693D01* +X133884895Y-103629193D01* +X133880050Y-103598600D01* +X133880050Y-103526692D01* +X133871907Y-103496301D01* +X133849349Y-103412114D01* +X133849347Y-103412111D01* +X133849347Y-103412109D01* +X133790042Y-103309391D01* +X133790040Y-103309389D01* +X133790039Y-103309387D01* +X133706163Y-103225511D01* +X133706160Y-103225509D01* +X133706158Y-103225507D01* +X133603439Y-103166202D01* +X133603440Y-103166202D01* +X133589901Y-103162574D01* +X133488859Y-103135500D01* +X133370241Y-103135500D01* +X133300117Y-103154289D01* +X133255659Y-103166202D01* +X133152941Y-103225507D01* +X133069057Y-103309391D01* +X133009752Y-103412110D01* +X133009751Y-103412111D01* +X133006817Y-103423063D01* +X132973492Y-103474376D01* +X132916369Y-103496301D01* +X132857269Y-103480464D01* +X132826930Y-103449410D01* +X132783967Y-103379757D01* +X132659990Y-103255780D01* +X132510774Y-103163743D01* +X132344343Y-103108593D01* +X132241637Y-103098100D01* +X132191651Y-103098100D01* +X132191650Y-103098101D01* +X131691650Y-103098101D01* +X131691650Y-103077159D01* +X131685626Y-103065336D01* +X131685626Y-103065332D01* +X131685625Y-103065329D01* +X131690939Y-103031791D01* +X131695197Y-103004904D01* +X131695200Y-103004898D01* +X131695204Y-103004893D01* +X131713400Y-102979848D01* +X132470953Y-102222296D01* +X132525470Y-102194519D01* +X132540957Y-102193300D01* +X138710641Y-102193300D01* +X138710642Y-102193300D01* +X138884616Y-102158695D01* +X138966556Y-102124753D01* +X139048497Y-102090813D01* +X139077877Y-102071182D01* +X139162197Y-102014841D01* +X139162198Y-102014840D01* +X139162202Y-102014837D01* +X139195986Y-101992264D01* +X140245114Y-100943136D01* +X140293285Y-100871041D01* +X140314361Y-100848258D01* +X140317382Y-100845879D01* +X140392685Y-100795564D01* +X140434801Y-100753447D01* +X140439421Y-100749811D01* +X140462884Y-100741173D01* +X140485170Y-100729819D01* +X140496057Y-100728962D01* +X140496840Y-100728674D01* +X140497466Y-100728851D01* +X140500657Y-100728600D01* +X140641648Y-100728600D01* +X140641650Y-100728600D01* +X140719400Y-100707767D01* +X140719401Y-100707766D01* +X140721286Y-100706678D01* +X140731819Y-100704438D01* +X140731990Y-100704393D01* +X140731992Y-100704401D01* +X140781134Y-100693955D01* +X140825789Y-100710097D01* +X140832926Y-100714866D01* +X140832927Y-100714866D01* +X140832928Y-100714867D01* +X140838825Y-100716040D01* +X140876822Y-100723599D01* +X140876828Y-100723599D01* +X140876830Y-100723600D01* +X140876831Y-100723600D01* +X141906469Y-100723600D01* +X141906470Y-100723600D01* +X141906471Y-100723599D01* +X141906477Y-100723599D01* +X141928273Y-100719262D01* +X141950372Y-100714867D01* +X142000154Y-100681604D01* +X142033417Y-100631822D01* +X142037812Y-100609723D01* +X142042149Y-100587927D01* +X142042150Y-100587918D01* +X142042150Y-99058281D01* +X142042149Y-99058272D01* +X142033417Y-99014379D01* +X142029897Y-99005880D01* +X142025098Y-98944883D01* +X142051357Y-98897994D01* +X142103239Y-98846113D01* +X142112762Y-98829619D01* +X142162547Y-98743390D01* +X142162547Y-98743388D01* +X142162549Y-98743386D01* +X142193250Y-98628809D01* +X142193250Y-98510191D01* +X142162549Y-98395614D01* +X142162547Y-98395611D01* +X142162547Y-98395609D01* +X142103242Y-98292891D01* +X142103240Y-98292889D01* +X142103239Y-98292887D01* +X142019363Y-98209011D01* +X142019360Y-98209009D01* +X142019358Y-98209007D01* +X141916639Y-98149702D01* +X141916635Y-98149700D01* +X141879901Y-98139857D01* +X141828587Y-98106533D01* +X141806661Y-98049411D01* +X141822497Y-97990311D01* +X141835518Y-97974231D01* +X142355253Y-97454496D01* +X142409770Y-97426719D01* +X142425257Y-97425500D01* +X142780340Y-97425500D01* +X142780341Y-97425500D01* +X142954316Y-97390894D01* +X143118197Y-97323013D01* +X143265685Y-97224464D01* +X143391114Y-97099035D01* +X143489663Y-96951547D01* +X143557544Y-96787666D01* +X143592150Y-96613691D01* +X143592150Y-96436309D01* +X143557544Y-96262334D01* +X143494115Y-96109200D01* +X143489664Y-96098455D01* +X143489664Y-96098454D01* +X143445910Y-96032972D01* +X143391114Y-95950965D01* +X143391112Y-95950963D01* +X143389516Y-95949017D01* +X143389097Y-95947946D01* +X143388412Y-95946921D01* +X143388637Y-95946770D01* +X143367221Y-95892038D01* +X143367050Y-95886219D01* +X143367050Y-94756579D01* +X143367049Y-94756576D01* +X143365263Y-94747599D01* +X143349052Y-94666095D01* +X143347150Y-94646781D01* +X143347150Y-94507274D01* +X143344837Y-94489707D01* +X143341851Y-94467027D01* +X143307776Y-94339860D01* +X143292242Y-94302357D01* +X143226416Y-94188343D01* +X143201704Y-94156138D01* +X143108612Y-94063046D01* +X143108607Y-94063042D01* +X143108605Y-94063040D01* +X143076410Y-94038336D01* +X143076407Y-94038334D01* +X142962393Y-93972508D01* +X142953219Y-93968708D01* +X142924896Y-93956976D01* +X142924892Y-93956974D01* +X142924890Y-93956974D01* +X142797723Y-93922899D01* +X142797718Y-93922898D01* +X142797717Y-93922898D01* +X142757476Y-93917600D01* +X142141650Y-93917600D01* +X142090398Y-93931333D01* +X142063892Y-93938435D01* +X142062002Y-93939527D01* +X142051464Y-93941765D01* +X142051311Y-93941807D01* +X142051308Y-93941798D01* +X142002153Y-93952243D01* +X141957511Y-93936102D01* +X141950376Y-93931334D01* +X141950370Y-93931332D01* +X141906477Y-93922600D01* +X141906470Y-93922600D01* +X140876830Y-93922600D01* +X140876822Y-93922600D01* +X140832929Y-93931332D01* +X140832925Y-93931334D01* +X140783148Y-93964594D01* +X140783144Y-93964598D01* +X140749884Y-94014375D01* +X140749882Y-94014379D01* +X140741150Y-94058272D01* +X140741150Y-95531131D01* +X140722243Y-95589322D01* +X140712154Y-95601135D01* +X139126585Y-97186704D01* +X139072068Y-97214481D01* +X139056581Y-97215700D01* +X138563159Y-97215700D01* +X138504968Y-97196793D01* +X138493161Y-97186709D01* +X138412163Y-97105711D01* +X138412160Y-97105709D01* +X138412158Y-97105707D01* +X138309439Y-97046402D01* +X138309440Y-97046402D01* +X138292534Y-97041872D01* +X138194859Y-97015700D01* +X138076241Y-97015700D01* +X138006117Y-97034489D01* +X137961659Y-97046402D01* +X137858941Y-97105707D01* +X137775057Y-97189591D01* +X137715752Y-97292309D01* +X137704287Y-97335099D01* +X137685050Y-97406891D01* +X137685050Y-97525509D01* +X137707535Y-97609424D01* +X137715752Y-97640090D01* +X137775057Y-97742808D01* +X137775059Y-97742810D01* +X137775061Y-97742813D01* +X137858937Y-97826689D01* +X137858939Y-97826690D01* +X137858941Y-97826692D01* +X137961660Y-97885997D01* +X137961661Y-97885997D01* +X137961664Y-97885999D01* +X138076241Y-97916700D01* +X138076243Y-97916700D01* +X138194857Y-97916700D01* +X138194859Y-97916700D01* +X138309436Y-97885999D01* +X138309438Y-97885997D01* +X138309440Y-97885997D01* +X138412158Y-97826692D01* +X138412158Y-97826691D01* +X138412163Y-97826689D01* +X138493157Y-97745694D01* +X138547672Y-97717919D01* +X138563159Y-97716700D01* +X139251177Y-97716700D01* +X139251178Y-97716700D01* +X139294736Y-97698657D01* +X139355730Y-97693857D01* +X139407899Y-97725826D01* +X139431315Y-97782353D01* +X139417032Y-97841848D01* +X139402624Y-97860125D01* +X139238587Y-98024162D01* +X139231918Y-98034143D01* +X139212485Y-98063228D01* +X139140035Y-98171654D01* +X139140035Y-98171655D01* +X139118520Y-98223599D01* +X139118520Y-98223600D01* +X139072154Y-98335535D01* +X139037550Y-98509505D01* +X139037550Y-99341208D01* +X139022186Y-99391860D01* +X139022932Y-99392259D01* +X139020927Y-99396009D01* +X139020868Y-99396206D01* +X139020640Y-99396546D01* +X139020634Y-99396557D01* +X138952756Y-99560432D01* +X138926817Y-99690836D01* +X138899723Y-99741524D01* +X138277946Y-100363303D01* +X138223429Y-100391081D01* +X138207942Y-100392300D01* +X136296561Y-100392300D01* +X136238370Y-100373393D01* +X136202406Y-100323893D01* +X136202406Y-100262707D01* +X136207620Y-100249820D01* +X136232222Y-100199495D01* +X136232221Y-100199495D01* +X136232223Y-100199493D01* +X136242150Y-100131360D01* +X136242150Y-99514840D01* +X136232223Y-99446707D01* +X136228688Y-99439477D01* +X136189222Y-99358747D01* +X136180848Y-99341617D01* +X136098133Y-99258902D01* +X135997669Y-99209788D01* +X135953696Y-99167246D01* +X135942150Y-99120848D01* +X135942150Y-97475868D01* +X135961057Y-97417677D01* +X135971140Y-97405870D01* +X140417714Y-92959295D01* +X140472231Y-92931519D01* +X140487718Y-92930300D01* +X140602257Y-92930300D01* +X140602259Y-92930300D01* +X140716836Y-92899599D01* +X140716838Y-92899597D01* +X140716840Y-92899597D01* +X140819558Y-92840292D01* +X140819558Y-92840291D01* +X140819563Y-92840289D01* +X140903439Y-92756413D01* +X140925552Y-92718113D01* +X140962747Y-92653690D01* +X140962747Y-92653688D01* +X140962749Y-92653686D01* +X140993450Y-92539109D01* +X140993450Y-92420491D01* +X140962749Y-92305914D01* +X140962747Y-92305911D01* +X140962747Y-92305909D01* +X140903442Y-92203191D01* +X140903440Y-92203189D01* +X140903439Y-92203187D01* +X140819563Y-92119311D01* +X140819560Y-92119309D01* +X140819558Y-92119307D01* +X140716839Y-92060002D01* +X140716841Y-92060002D01* +X140704648Y-92056735D01* +X140683460Y-92051057D01* +X140632148Y-92017735D01* +X140610221Y-91960613D01* +X140626057Y-91901513D01* +X140639082Y-91885428D01* +X140870215Y-91654296D01* +X140924731Y-91626519D01* +X140940218Y-91625300D01* +X141441479Y-91625300D01* +X141512987Y-91595680D01* +X141533547Y-91587164D01* +X141604014Y-91516697D01* +X141642150Y-91424628D01* +X141642150Y-91322600D01* +X141661057Y-91264409D01* +X141710557Y-91228445D01* +X141741150Y-91223600D01* +X141906469Y-91223600D01* +X141906470Y-91223600D01* +X141906471Y-91223599D01* +X141906477Y-91223599D01* +X141928273Y-91219262D01* +X141950372Y-91214867D01* +X142000154Y-91181604D01* +X142033417Y-91131822D01* +X142040179Y-91097830D01* +X142042149Y-91087927D01* +X142042150Y-91087918D01* +X142042150Y-89558281D01* +X142042149Y-89558272D01* +X142033417Y-89514379D01* +X142033415Y-89514375D01* +X142014297Y-89485763D01* +X142000154Y-89464596D01* +X141999490Y-89464152D01* +X141950374Y-89431334D01* +X141950370Y-89431332D01* +X141906477Y-89422600D01* +X141906470Y-89422600D01* +X140876830Y-89422600D01* +X140876822Y-89422600D01* +X140832929Y-89431332D01* +X140832924Y-89431334D01* +X140825786Y-89436104D01* +X140766897Y-89452709D01* +X140721291Y-89439524D01* +X140719403Y-89438434D01* +X140719400Y-89438433D01* +X140641650Y-89417600D01* +X140025824Y-89417600D01* +X139994281Y-89421753D01* +X139981358Y-89422600D01* +X137766149Y-89422600D01* +X137707958Y-89403693D01* +X137671994Y-89354193D01* +X137671994Y-89293007D01* +X137681805Y-89274374D01* +X137680695Y-89273733D01* +X137743247Y-89165390D01* +X137743247Y-89165388D01* +X137743249Y-89165386D01* +X137773950Y-89050809D01* +X137773950Y-88932191D01* +X137743249Y-88817614D01* +X137743247Y-88817611D01* +X137743247Y-88817609D01* +X137683942Y-88714891D01* +X137683940Y-88714889D01* +X137683939Y-88714887D01* +X137600063Y-88631011D01* +X137600060Y-88631009D01* +X137600058Y-88631007D01* +X137497339Y-88571702D01* +X137497340Y-88571702D01* +X137468760Y-88564044D01* +X137382759Y-88541000D01* +X137264141Y-88541000D01* +X137194017Y-88559789D01* +X137149559Y-88571702D01* +X137046841Y-88631007D01* +X136962957Y-88714891D01* +X136903652Y-88817609D01* +X136872949Y-88932193D01* +X136872103Y-88938625D01* +X136869761Y-88938316D01* +X136854043Y-88986694D01* +X136804543Y-89022658D01* +X136743357Y-89022658D01* +X136736065Y-89019967D01* +X136692223Y-89001807D01* +X136692213Y-89001804D01* +X136518244Y-88967200D01* +X136518242Y-88967200D01* +X136518241Y-88967200D01* +X135039842Y-88967200D01* +X134862458Y-88967200D01* +X134862455Y-88967200D01* +X134688486Y-89001804D01* +X134688480Y-89001806D01* +X134607226Y-89035464D01* +X134607225Y-89035464D01* +X134524607Y-89069684D01* +X134524595Y-89069690D01* +X134377115Y-89168235D01* +X134377114Y-89168237D01* +X133342189Y-90203160D01* +X133342185Y-90203164D01* +X133314030Y-90245302D01* +X133265979Y-90283181D01* +X133231715Y-90289300D01* +X130265011Y-90289300D01* +X130206820Y-90270393D01* +X130170856Y-90220893D01* +X130170856Y-90159707D01* +X130206820Y-90110207D01* +X130227126Y-90098836D01* +X130318192Y-90061115D01* +X130318191Y-90061115D01* +X130318197Y-90061113D01* +X130318199Y-90061111D01* +X130318204Y-90061109D01* +X130365392Y-90029578D01* +X130465686Y-89962564D01* +X130591114Y-89837136D01* +X135015654Y-85412596D01* +X135070171Y-85384819D01* +X135085658Y-85383600D01* +X142837642Y-85383600D01* +X142895833Y-85402507D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X131805199Y-92093191D02* +G01* +X131814478Y-92091983D01* +X131833686Y-92102447D01* +X131854492Y-92109207D01* +X131859992Y-92116777D01* +X131868208Y-92121253D01* +X131877596Y-92141007D01* +X131890456Y-92158707D01* +X131890456Y-92168064D01* +X131894472Y-92176515D01* +X131890456Y-92198016D01* +X131890456Y-92219893D01* +X131883811Y-92233592D01* +X131883238Y-92236660D01* +X131881098Y-92240587D01* +X131843837Y-92296353D01* +X131824013Y-92344213D01* +X131822001Y-92349068D01* +X131822001Y-92349070D01* +X131775956Y-92460230D01* +X131775954Y-92460236D01* +X131741420Y-92633851D01* +X131741414Y-92633886D01* +X131741350Y-92634209D01* +X131741350Y-92634210D01* +X131741350Y-95036775D01* +X131722443Y-95094966D01* +X131672943Y-95130930D01* +X131611757Y-95130930D01* +X131611211Y-95130750D01* +X131544346Y-95108594D01* +X131544343Y-95108593D01* +X131441637Y-95098100D01* +X131391651Y-95098100D01* +X131391650Y-95098101D01* +X131391650Y-97548098D01* +X131391651Y-97548099D01* +X131441636Y-97548099D01* +X131544337Y-97537607D01* +X131544348Y-97537604D01* +X131611210Y-97515449D01* +X131672394Y-97515093D01* +X131722102Y-97550768D01* +X131741348Y-97608847D01* +X131741350Y-97609424D01* +X131741350Y-100414510D01* +X131722443Y-100472701D01* +X131697352Y-100496825D01* +X131593666Y-100566107D01* +X131552913Y-100593337D01* +X130111652Y-102034596D01* +X130057136Y-102062373D01* +X129996704Y-102052802D01* +X129971645Y-102034596D01* +X129633430Y-101696381D01* +X129222886Y-101285836D01* +X129163809Y-101246363D01* +X129075397Y-101187287D01* +X129075398Y-101187287D01* +X129075396Y-101187286D01* +X128911514Y-101119404D01* +X128737544Y-101084800D01* +X128737542Y-101084800D01* +X128737541Y-101084800D01* +X126729396Y-101084800D01* +X126714631Y-101080002D01* +X126699109Y-101080053D01* +X126686268Y-101070787D01* +X126671205Y-101065893D01* +X126662079Y-101053333D01* +X126649492Y-101044250D01* +X126644550Y-101029205D01* +X126635241Y-101016393D01* +X126635241Y-101000867D01* +X126630397Y-100986121D01* +X126635241Y-100971046D01* +X126635241Y-100955207D01* +X126644366Y-100942646D01* +X126649115Y-100927869D01* +X126660344Y-100920654D01* +X126671205Y-100905707D01* +X126698498Y-100891745D01* +X126704198Y-100889872D01* +X126764916Y-100877795D01* +X126853260Y-100841201D01* +X126928797Y-100809913D01* +X126928798Y-100809912D01* +X126928801Y-100809911D01* +X126928804Y-100809909D01* +X127057973Y-100723600D01* +X127057974Y-100723599D01* +X127076286Y-100711364D01* +X129941114Y-97846535D01* +X129961129Y-97816581D01* +X130008627Y-97745496D01* +X130039659Y-97699054D01* +X130039665Y-97699042D01* +X130065446Y-97636801D01* +X130065446Y-97636800D01* +X130074799Y-97614220D01* +X130107545Y-97535166D01* +X130142150Y-97361191D01* +X130142150Y-97348268D01* +X130161057Y-97290077D01* +X130210557Y-97254113D01* +X130271743Y-97254113D01* +X130311154Y-97278264D01* +X130423309Y-97390419D01* +X130572525Y-97482456D01* +X130738956Y-97537606D01* +X130841663Y-97548099D01* +X130891650Y-97548098D01* +X130891650Y-95098099D01* +X130841665Y-95098100D01* +X130841662Y-95098101D01* +X130738962Y-95108592D01* +X130738950Y-95108595D01* +X130572525Y-95163743D01* +X130423309Y-95255780D01* +X130299330Y-95379759D01* +X130207293Y-95528975D01* +X130152143Y-95695406D01* +X130147361Y-95742209D01* +X130138876Y-95761415D01* +X130134439Y-95781941D01* +X130126784Y-95788785D01* +X130122636Y-95798176D01* +X130104482Y-95808727D01* +X130088828Y-95822725D01* +X130078613Y-95823762D01* +X130069737Y-95828922D01* +X130048847Y-95826787D01* +X130027956Y-95828910D01* +X130020590Y-95823899D01* +X130008868Y-95822702D01* +X129975074Y-95798134D01* +X129970432Y-95792943D01* +X129941114Y-95749065D01* +X129847428Y-95655379D01* +X129845578Y-95653310D01* +X129844219Y-95650230D01* +X129831169Y-95632267D01* +X129827809Y-95625673D01* +X129819700Y-95609758D01* +X129729992Y-95520050D01* +X129616954Y-95462454D01* +X129616955Y-95462454D01* +X129523172Y-95447600D01* +X129523169Y-95447600D01* +X129465776Y-95447600D01* +X129446462Y-95445698D01* +X129330343Y-95422600D01* +X129330341Y-95422600D01* +X129152959Y-95422600D01* +X129152954Y-95422600D01* +X129036832Y-95445698D01* +X129017521Y-95447600D01* +X128960128Y-95447600D01* +X128960127Y-95447601D01* +X128866349Y-95462452D01* +X128866345Y-95462454D01* +X128753308Y-95520050D01* +X128753306Y-95520051D01* +X128663600Y-95609756D01* +X128663597Y-95609760D01* +X128652127Y-95632271D01* +X128633923Y-95657326D01* +X128542187Y-95749063D01* +X128443635Y-95896555D01* +X128375414Y-96061259D01* +X128335678Y-96107785D01* +X128276183Y-96122069D01* +X128219655Y-96098654D01* +X128187685Y-96046486D01* +X128184950Y-96023374D01* +X128184950Y-95736859D01* +X128184951Y-95736850D01* +X128184951Y-95625673D01* +X128158926Y-95562844D01* +X128158926Y-95562843D01* +X128146815Y-95533605D01* +X128146814Y-95533604D01* +X128146814Y-95533603D01* +X128076347Y-95463136D01* +X128076345Y-95463135D01* +X127986846Y-95373636D01* +X127959069Y-95319119D01* +X127957850Y-95303632D01* +X127957850Y-95189092D01* +X127956911Y-95185587D01* +X127927149Y-95074514D01* +X127927147Y-95074511D01* +X127927147Y-95074509D01* +X127867842Y-94971791D01* +X127867840Y-94971789D01* +X127867839Y-94971787D01* +X127783963Y-94887911D01* +X127783960Y-94887909D01* +X127783958Y-94887907D01* +X127681239Y-94828602D01* +X127681240Y-94828602D01* +X127646192Y-94819211D01* +X127566659Y-94797900D01* +X127448041Y-94797900D01* +X127377917Y-94816689D01* +X127333459Y-94828602D01* +X127230741Y-94887907D01* +X127146857Y-94971791D01* +X127087552Y-95074509D01* +X127072434Y-95130930D01* +X127056850Y-95189091D01* +X127056850Y-95307709D01* +X127078477Y-95388423D01* +X127087552Y-95422290D01* +X127146857Y-95525008D01* +X127146859Y-95525010D01* +X127146861Y-95525013D01* +X127230737Y-95608889D01* +X127230739Y-95608890D01* +X127230741Y-95608892D01* +X127333460Y-95668197D01* +X127333461Y-95668197D01* +X127333464Y-95668199D01* +X127448041Y-95698900D01* +X127448043Y-95698900D01* +X127562582Y-95698900D01* +X127570179Y-95701368D01* +X127578069Y-95700119D01* +X127598724Y-95710643D01* +X127620773Y-95717807D01* +X127632586Y-95727896D01* +X127654954Y-95750264D01* +X127682731Y-95804781D01* +X127683950Y-95820268D01* +X127683950Y-96371281D01* +X127665043Y-96429472D01* +X127615543Y-96465436D01* +X127554357Y-96465436D01* +X127535451Y-96457018D01* +X127495239Y-96433802D01* +X127495236Y-96433801D01* +X127380659Y-96403100D01* +X127262041Y-96403100D01* +X127194260Y-96421262D01* +X127147459Y-96433802D01* +X127044741Y-96493107D01* +X127044740Y-96493108D01* +X127044737Y-96493110D01* +X127044737Y-96493111D01* +X126963742Y-96574105D01* +X126909228Y-96601881D01* +X126893741Y-96603100D01* +X124866919Y-96603100D01* +X124859321Y-96600631D01* +X124851432Y-96601881D01* +X124830776Y-96591356D01* +X124808728Y-96584193D01* +X124796915Y-96574104D01* +X124775415Y-96552604D01* +X124747638Y-96498087D01* +X124757209Y-96437655D01* +X124800474Y-96394390D01* +X124845419Y-96383600D01* +X124890957Y-96383600D01* +X124890959Y-96383600D01* +X125005536Y-96352899D01* +X125005538Y-96352897D01* +X125005540Y-96352897D01* +X125108258Y-96293592D01* +X125108258Y-96293591D01* +X125108263Y-96293589D01* +X125192139Y-96209713D01* +X125192142Y-96209708D01* +X125251447Y-96106990D01* +X125251447Y-96106988D01* +X125251449Y-96106986D01* +X125282150Y-95992409D01* +X125282150Y-95873791D01* +X125251449Y-95759214D01* +X125251447Y-95759211D01* +X125251447Y-95759209D01* +X125192142Y-95656491D01* +X125192140Y-95656489D01* +X125192139Y-95656487D01* +X125148158Y-95612506D01* +X125120383Y-95557992D01* +X125129954Y-95497560D01* +X125173219Y-95454295D01* +X125205246Y-95444351D01* +X125210946Y-95443600D01* +X125210959Y-95443600D01* +X125325536Y-95412899D01* +X125325538Y-95412897D01* +X125325540Y-95412897D01* +X125428258Y-95353592D01* +X125428258Y-95353591D01* +X125428263Y-95353589D01* +X125512139Y-95269713D01* +X125528649Y-95241117D01* +X125571447Y-95166990D01* +X125571447Y-95166988D01* +X125571449Y-95166986D01* +X125602150Y-95052409D01* +X125602150Y-94933791D01* +X125571449Y-94819214D01* +X125515120Y-94721651D01* +X125502399Y-94661803D01* +X125527285Y-94605908D01* +X125580273Y-94575315D01* +X125587935Y-94573998D01* +X125590955Y-94573600D01* +X125590959Y-94573600D01* +X125705536Y-94542899D01* +X125705538Y-94542897D01* +X125705540Y-94542897D01* +X125808258Y-94483592D01* +X125808258Y-94483591D01* +X125808263Y-94483589D01* +X125892139Y-94399713D01* +X125905315Y-94376892D01* +X125951447Y-94296990D01* +X125951447Y-94296988D01* +X125951449Y-94296986D01* +X125982150Y-94182409D01* +X125982150Y-94063791D01* +X125951449Y-93949214D01* +X125951447Y-93949211D01* +X125951447Y-93949209D01* +X125892142Y-93846491D01* +X125892140Y-93846489D01* +X125892139Y-93846487D01* +X125808263Y-93762611D01* +X125804184Y-93760256D01* +X125800859Y-93758336D01* +X125759919Y-93712866D01* +X125753524Y-93652016D01* +X125784117Y-93599028D01* +X125840013Y-93574142D01* +X125850360Y-93573600D01* +X129981479Y-93573600D01* +X130027512Y-93554532D01* +X130073547Y-93535464D01* +X130321812Y-93287196D01* +X130376329Y-93259419D01* +X130391816Y-93258200D01* +X130506357Y-93258200D01* +X130506359Y-93258200D01* +X130620936Y-93227499D01* +X130620938Y-93227497D01* +X130620940Y-93227497D01* +X130723658Y-93168192D01* +X130723658Y-93168191D01* +X130723663Y-93168189D01* +X130807539Y-93084313D01* +X130808189Y-93083187D01* +X130866847Y-92981590D01* +X130866847Y-92981588D01* +X130866849Y-92981586D01* +X130897550Y-92867009D01* +X130897550Y-92748391D01* +X130866849Y-92633814D01* +X130866847Y-92633811D01* +X130866847Y-92633809D01* +X130807542Y-92531091D01* +X130807540Y-92531089D01* +X130807539Y-92531087D01* +X130723663Y-92447211D01* +X130723660Y-92447209D01* +X130723658Y-92447207D01* +X130620939Y-92387902D01* +X130620940Y-92387902D01* +X130584556Y-92378153D01* +X130506359Y-92357200D01* +X130387741Y-92357200D01* +X130332291Y-92372058D01* +X130273162Y-92387901D01* +X130191825Y-92434862D01* +X130131976Y-92447583D01* +X130076081Y-92422696D01* +X130046698Y-92374749D01* +X130022949Y-92286114D01* +X130022947Y-92286111D01* +X130022947Y-92286109D01* +X129995633Y-92238800D01* +X129982911Y-92178952D01* +X130007798Y-92123056D01* +X130060786Y-92092463D01* +X130081369Y-92090300D01* +X131796301Y-92090300D01* +X131805199Y-92093191D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X136396152Y-91079518D02* +G01* +X136458396Y-91121109D01* +X136458400Y-91121111D01* +X136458403Y-91121113D01* +X136622284Y-91188995D01* +X136796258Y-91223600D01* +X136796259Y-91223600D01* +X139981358Y-91223600D01* +X139994281Y-91224447D01* +X140025824Y-91228600D01* +X140348381Y-91228600D01* +X140406572Y-91247507D01* +X140442536Y-91297007D01* +X140442536Y-91358193D01* +X140418385Y-91397603D01* +X138592888Y-93223100D01* +X136800984Y-95015004D01* +X136793866Y-95018630D01* +X136789171Y-95025093D01* +X136767122Y-95032256D01* +X136746467Y-95042781D01* +X136730980Y-95044000D01* +X136686830Y-95044000D01* +X136628639Y-95025093D01* +X136592675Y-94975593D01* +X136588236Y-94953958D01* +X136585241Y-94920996D01* +X136585239Y-94920990D01* +X136534670Y-94758707D01* +X136534667Y-94758699D01* +X136446725Y-94613227D01* +X136326522Y-94493024D01* +X136181050Y-94405082D01* +X136181042Y-94405079D01* +X136018760Y-94354510D01* +X136018754Y-94354508D01* +X135948231Y-94348100D01* +X135941651Y-94348100D01* +X135941650Y-94348101D01* +X135941650Y-96298098D01* +X135941651Y-96298099D01* +X135948216Y-96298099D01* +X135948232Y-96298098D01* +X136018753Y-96291691D01* +X136018759Y-96291689D01* +X136155399Y-96249111D01* +X136216580Y-96249850D01* +X136265642Y-96286409D01* +X136283845Y-96344824D01* +X136264236Y-96402782D01* +X136254856Y-96413632D01* +X135549753Y-97118736D01* +X135549752Y-97118735D01* +X135479285Y-97189203D01* +X135441150Y-97281271D01* +X135441150Y-97474151D01* +X135422243Y-97532342D01* +X135372743Y-97568306D01* +X135316528Y-97569778D01* +X135290859Y-97562900D01* +X135172241Y-97562900D01* +X135116582Y-97577814D01* +X135057659Y-97593602D01* +X134954941Y-97652907D01* +X134871057Y-97736791D01* +X134811752Y-97839509D01* +X134799838Y-97883972D01* +X134781050Y-97954091D01* +X134781050Y-98072709D01* +X134800601Y-98145674D01* +X134811752Y-98187290D01* +X134871057Y-98290008D01* +X134871059Y-98290010D01* +X134871061Y-98290013D01* +X134954937Y-98373889D01* +X134971702Y-98383568D01* +X134971704Y-98383570D01* +X135057660Y-98433197D01* +X135057661Y-98433197D01* +X135057664Y-98433199D01* +X135172241Y-98463900D01* +X135172243Y-98463900D01* +X135290858Y-98463900D01* +X135290859Y-98463900D01* +X135316527Y-98457022D01* +X135377626Y-98460223D01* +X135425177Y-98498727D01* +X135441150Y-98552648D01* +X135441150Y-99120848D01* +X135422243Y-99179039D01* +X135385630Y-99209789D01* +X135285168Y-99258901D01* +X135202451Y-99341618D01* +X135151077Y-99446704D01* +X135151077Y-99446707D01* +X135141150Y-99514840D01* +X135141150Y-100131360D01* +X135146246Y-100166333D01* +X135151077Y-100199495D01* +X135175680Y-100249820D01* +X135184251Y-100310402D01* +X135155576Y-100364451D01* +X135100607Y-100391324D01* +X135086739Y-100392300D01* +X134646561Y-100392300D01* +X134588370Y-100373393D01* +X134552406Y-100323893D01* +X134552406Y-100262707D01* +X134557620Y-100249820D01* +X134582222Y-100199495D01* +X134582221Y-100199495D01* +X134582223Y-100199493D01* +X134592150Y-100131360D01* +X134592150Y-99667868D01* +X134611057Y-99609677D01* +X134621146Y-99597864D01* +X134633646Y-99585364D01* +X134633647Y-99585364D01* +X134704114Y-99514897D01* +X134736022Y-99437864D01* +X134742251Y-99422827D01* +X134742251Y-99323172D01* +X134742250Y-99323169D01* +X134742250Y-99247609D01* +X134761157Y-99189418D01* +X134771240Y-99177611D01* +X134852239Y-99096613D01* +X134874371Y-99058280D01* +X134911547Y-98993890D01* +X134911547Y-98993888D01* +X134911549Y-98993886D01* +X134942250Y-98879309D01* +X134942250Y-98760691D01* +X134911549Y-98646114D01* +X134911547Y-98646111D01* +X134911547Y-98646109D01* +X134852242Y-98543391D01* +X134852240Y-98543389D01* +X134852239Y-98543387D01* +X134768363Y-98459511D01* +X134751597Y-98449831D01* +X134751594Y-98449828D01* +X134665639Y-98400202D01* +X134665640Y-98400202D01* +X134648517Y-98395614D01* +X134551059Y-98369500D01* +X134432441Y-98369500D01* +X134366168Y-98387258D01* +X134317859Y-98400202D01* +X134215141Y-98459507D01* +X134131257Y-98543391D01* +X134071952Y-98646109D01* +X134071951Y-98646114D01* +X134041250Y-98760691D01* +X134041250Y-98879309D01* +X134054830Y-98929989D01* +X134071952Y-98993890D01* +X134103828Y-99049100D01* +X134116550Y-99108948D01* +X134091663Y-99164844D01* +X134038675Y-99195437D01* +X134018092Y-99197600D01* +X133808390Y-99197600D01* +X133774323Y-99202563D01* +X133740254Y-99207527D01* +X133684830Y-99234623D01* +X133624248Y-99243194D01* +X133570198Y-99214518D01* +X133543326Y-99159550D01* +X133542350Y-99145682D01* +X133542350Y-96000517D01* +X133561257Y-95942326D01* +X133610757Y-95906362D01* +X133671943Y-95906362D01* +X133684830Y-95911576D01* +X133740257Y-95938673D01* +X133808390Y-95948600D01* +X133890150Y-95948600D01* +X133948341Y-95967507D01* +X133984305Y-96017007D01* +X133989150Y-96047600D01* +X133989150Y-96772790D01* +X133970243Y-96830981D01* +X133960154Y-96842793D01* +X133879161Y-96923786D01* +X133879157Y-96923791D01* +X133819852Y-97026509D01* +X133807368Y-97073100D01* +X133789150Y-97141091D01* +X133789150Y-97259709D01* +X133812968Y-97348599D01* +X133819852Y-97374290D01* +X133879157Y-97477008D01* +X133879159Y-97477010D01* +X133879161Y-97477013D01* +X133963037Y-97560889D01* +X133963039Y-97560890D01* +X133963041Y-97560892D01* +X134065760Y-97620197D01* +X134065761Y-97620197D01* +X134065764Y-97620199D01* +X134180341Y-97650900D01* +X134180343Y-97650900D01* +X134298957Y-97650900D01* +X134298959Y-97650900D01* +X134413536Y-97620199D01* +X134413538Y-97620197D01* +X134413540Y-97620197D01* +X134516258Y-97560892D01* +X134516258Y-97560891D01* +X134516263Y-97560889D01* +X134600139Y-97477013D01* +X134601251Y-97475087D01* +X134659447Y-97374290D01* +X134659447Y-97374288D01* +X134659449Y-97374286D01* +X134690150Y-97259709D01* +X134690150Y-97141091D01* +X134659449Y-97026514D01* +X134659447Y-97026511D01* +X134659447Y-97026509D01* +X134600142Y-96923791D01* +X134600138Y-96923786D01* +X134519146Y-96842793D01* +X134491369Y-96788276D01* +X134490150Y-96772790D01* +X134490150Y-95886288D01* +X134509057Y-95828097D01* +X134519140Y-95816290D01* +X134530848Y-95804583D01* +X134582223Y-95699493D01* +X134592150Y-95631360D01* +X134592150Y-95573101D01* +X134791651Y-95573101D01* +X134791651Y-95654682D01* +X134798058Y-95725203D01* +X134798060Y-95725209D01* +X134848629Y-95887492D01* +X134848632Y-95887500D01* +X134936574Y-96032972D01* +X135056777Y-96153175D01* +X135202249Y-96241117D01* +X135202257Y-96241120D01* +X135364539Y-96291689D01* +X135364545Y-96291691D01* +X135435075Y-96298098D01* +X135441650Y-96298098D01* +X135441650Y-95573101D01* +X135441649Y-95573100D01* +X134791652Y-95573100D01* +X134791651Y-95573101D01* +X134592150Y-95573101D01* +X134592150Y-95014840D01* +X134588752Y-94991518D01* +X134791650Y-94991518D01* +X134791650Y-95073099D01* +X134791651Y-95073100D01* +X135441649Y-95073100D01* +X135441650Y-95073099D01* +X135441650Y-94348101D01* +X135441648Y-94348099D01* +X135435075Y-94348100D01* +X135364546Y-94354508D01* +X135364540Y-94354510D01* +X135202257Y-94405079D01* +X135202249Y-94405082D01* +X135056777Y-94493024D01* +X134936574Y-94613227D01* +X134848632Y-94758699D01* +X134848629Y-94758707D01* +X134798060Y-94920989D01* +X134798058Y-94920995D01* +X134791650Y-94991518D01* +X134588752Y-94991518D01* +X134582223Y-94946707D01* +X134580535Y-94943255D01* +X134553180Y-94887298D01* +X134530848Y-94841617D01* +X134448133Y-94758902D01* +X134347669Y-94709788D01* +X134303696Y-94667246D01* +X134292150Y-94620848D01* +X134292150Y-93117868D01* +X134311057Y-93059677D01* +X134321140Y-93047870D01* +X135391414Y-91977595D01* +X135445931Y-91949819D01* +X135461418Y-91948600D01* +X135924907Y-91948600D01* +X135924910Y-91948600D01* +X135993043Y-91938673D01* +X136098133Y-91887298D01* +X136180848Y-91804583D01* +X136232223Y-91699493D01* +X136242150Y-91631360D01* +X136242150Y-91161833D01* +X136261057Y-91103642D01* +X136310557Y-91067678D01* +X136371743Y-91067678D01* +X136396152Y-91079518D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X102082234Y-98092007D02* +G01* +X102094047Y-98102096D01* +X103112154Y-99120203D01* +X103139931Y-99174720D01* +X103141150Y-99190207D01* +X103141150Y-99616435D01* +X103122243Y-99674626D01* +X103072743Y-99710590D01* +X103011557Y-99710590D01* +X102987148Y-99698750D01* +X102898084Y-99639238D01* +X102898075Y-99639234D01* +X102779697Y-99590200D01* +X102779695Y-99590199D01* +X102779694Y-99590199D01* +X102654019Y-99565200D01* +X101923768Y-99565200D01* +X101865577Y-99546293D01* +X101829613Y-99496793D01* +X101829613Y-99435607D01* +X101857274Y-99395852D01* +X101855916Y-99394494D01* +X101983969Y-99266440D01* +X102076006Y-99117224D01* +X102131156Y-98950793D01* +X102141650Y-98848087D01* +X102141650Y-98573101D01* +X102141649Y-98573100D01* +X101240650Y-98573100D01* +X101182459Y-98554193D01* +X101146495Y-98504693D01* +X101141650Y-98474100D01* +X101141650Y-98172100D01* +X101160557Y-98113909D01* +X101210057Y-98077945D01* +X101240650Y-98073100D01* +X102024043Y-98073100D01* +X102082234Y-98092007D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X109547645Y-84527521D02* +G01* +X109565810Y-84528471D01* +X109576028Y-84536743D01* +X109588535Y-84540807D01* +X109599228Y-84555525D01* +X109613365Y-84566970D01* +X109616769Y-84579668D01* +X109624499Y-84590307D01* +X109624499Y-84608499D01* +X109629209Y-84626068D01* +X109624499Y-84638342D01* +X109624499Y-84651493D01* +X109611001Y-84673518D01* +X109607290Y-84683192D01* +X109604020Y-84687230D01* +X109542186Y-84749065D01* +X109486527Y-84832362D01* +X109483670Y-84835892D01* +X109461629Y-84850209D01* +X109440988Y-84866481D01* +X109436297Y-84866665D01* +X109432360Y-84869223D01* +X109406727Y-84872600D01* +X109371789Y-84872600D01* +X109371785Y-84872601D01* +X109346659Y-84875514D01* +X109243885Y-84920894D01* +X109164444Y-85000335D01* +X109119064Y-85103111D01* +X109116150Y-85128230D01* +X109116150Y-85517960D01* +X109116151Y-85517963D01* +X109119064Y-85543090D01* +X109124168Y-85554649D01* +X109164444Y-85645865D01* +X109243885Y-85725306D01* +X109282138Y-85742196D01* +X109327733Y-85782995D01* +X109341150Y-85832760D01* +X109341150Y-86083439D01* +X109322243Y-86141630D01* +X109282139Y-86174003D01* +X109243886Y-86190893D01* +X109164444Y-86270335D01* +X109119064Y-86373111D01* +X109116150Y-86398230D01* +X109116150Y-86787960D01* +X109116151Y-86787963D01* +X109119064Y-86813090D01* +X109140240Y-86861049D01* +X109164444Y-86915865D01* +X109243885Y-86995306D01* +X109282138Y-87012196D01* +X109327733Y-87052995D01* +X109341150Y-87102760D01* +X109341150Y-87353439D01* +X109322243Y-87411630D01* +X109282139Y-87444003D01* +X109243886Y-87460893D01* +X109164444Y-87540335D01* +X109119064Y-87643111D01* +X109116150Y-87668230D01* +X109116150Y-88057960D01* +X109116151Y-88057963D01* +X109119064Y-88083090D01* +X109133125Y-88114934D01* +X109164444Y-88185865D01* +X109243885Y-88265306D01* +X109346659Y-88310685D01* +X109371785Y-88313600D01* +X109406723Y-88313599D01* +X109464914Y-88332505D01* +X109489040Y-88357597D01* +X109497214Y-88369830D01* +X109542185Y-88437135D01* +X109542190Y-88437141D01* +X109618646Y-88513596D01* +X109646424Y-88568112D01* +X109636853Y-88628545D01* +X109593589Y-88671809D01* +X109548644Y-88682600D01* +X109371789Y-88682600D01* +X109371786Y-88682601D01* +X109346659Y-88685514D01* +X109243885Y-88730894D01* +X109164444Y-88810335D01* +X109119064Y-88913111D01* +X109116150Y-88938230D01* +X109116150Y-89327960D01* +X109116151Y-89327963D01* +X109119064Y-89353090D01* +X109132608Y-89383764D01* +X109164444Y-89455865D01* +X109243885Y-89535306D01* +X109346659Y-89580685D01* +X109371785Y-89583600D01* +X110296880Y-89583599D01* +X110355071Y-89602506D01* +X110366884Y-89612595D01* +X111321184Y-90566894D01* +X112269885Y-91515595D01* +X112269886Y-91515597D01* +X112340353Y-91586064D01* +X112340354Y-91586064D01* +X112340355Y-91586065D01* +X112432421Y-91624200D01* +X112432422Y-91624200D01* +X112532078Y-91624200D01* +X112629141Y-91624200D01* +X112687332Y-91643107D01* +X112699138Y-91653190D01* +X112780137Y-91734189D01* +X112780139Y-91734190D01* +X112780141Y-91734192D01* +X112882860Y-91793497D01* +X112882861Y-91793497D01* +X112882864Y-91793499D01* +X112997441Y-91824200D01* +X112997443Y-91824200D01* +X113116057Y-91824200D01* +X113116059Y-91824200D01* +X113230636Y-91793499D01* +X113230638Y-91793497D01* +X113230640Y-91793497D01* +X113333358Y-91734192D01* +X113333358Y-91734191D01* +X113333363Y-91734189D01* +X113417239Y-91650313D01* +X113421400Y-91643107D01* +X113449646Y-91594183D01* +X113476549Y-91547586D01* +X113492394Y-91488451D01* +X113525715Y-91437140D01* +X113582837Y-91415213D01* +X113641937Y-91431048D01* +X113658023Y-91444073D01* +X114459614Y-92245664D01* +X114459617Y-92245666D01* +X114492465Y-92267614D01* +X114492466Y-92267615D01* +X114607095Y-92344209D01* +X114607100Y-92344211D01* +X114607103Y-92344213D01* +X114689041Y-92378152D01* +X114689042Y-92378153D01* +X114733858Y-92396716D01* +X114770984Y-92412095D01* +X114944958Y-92446700D01* +X114944959Y-92446700D01* +X117348343Y-92446700D01* +X117406534Y-92465607D01* +X117418347Y-92475696D01* +X117450215Y-92507564D01* +X117597703Y-92606113D01* +X117597704Y-92606113D01* +X117597705Y-92606114D01* +X117607833Y-92610309D01* +X117761584Y-92673994D01* +X117935559Y-92708600D01* +X117935560Y-92708600D01* +X118112940Y-92708600D01* +X118112941Y-92708600D01* +X118286916Y-92673994D01* +X118450797Y-92606113D01* +X118598285Y-92507564D01* +X118630153Y-92475696D01* +X118684670Y-92447919D01* +X118700157Y-92446700D01* +X119091850Y-92446700D01* +X119150041Y-92465607D01* +X119186005Y-92515107D01* +X119186105Y-92515418D01* +X119190850Y-92530187D01* +X119190850Y-92552720D01* +X119223111Y-92630606D01* +X119224355Y-92634476D01* +X119224288Y-92654530D01* +X119227198Y-92684070D01* +X119216150Y-92739612D01* +X119216150Y-92906582D01* +X119225639Y-92954286D01* +X119218447Y-93015048D01* +X119176914Y-93059977D01* +X119128541Y-93072600D01* +X114687709Y-93072600D01* +X114687701Y-93072599D01* +X114676178Y-93072599D01* +X114576523Y-93072599D01* +X114522589Y-93094939D01* +X114484453Y-93110734D01* +X114413985Y-93181202D01* +X114413986Y-93181203D01* +X114413985Y-93181204D01* +X113644284Y-93950904D01* +X113589767Y-93978681D01* +X113574280Y-93979900D01* +X113459741Y-93979900D01* +X113391818Y-93998100D01* +X113345159Y-94010602D01* +X113242441Y-94069907D01* +X113158557Y-94153791D01* +X113099252Y-94256509D01* +X113092478Y-94281790D01* +X113068550Y-94371091D01* +X113068550Y-94489709D01* +X113090895Y-94573100D01* +X113099252Y-94604290D01* +X113158557Y-94707008D01* +X113158559Y-94707010D01* +X113158561Y-94707013D01* +X113242437Y-94790889D01* +X113242439Y-94790890D01* +X113242441Y-94790892D01* +X113345160Y-94850197D01* +X113345161Y-94850197D01* +X113345164Y-94850199D01* +X113459741Y-94880900D01* +X113459743Y-94880900D01* +X113578357Y-94880900D01* +X113578359Y-94880900D01* +X113692936Y-94850199D01* +X113692938Y-94850197D01* +X113692940Y-94850197D01* +X113795658Y-94790892D01* +X113795658Y-94790891D01* +X113795663Y-94790889D01* +X113879539Y-94707013D01* +X113888448Y-94691582D01* +X113938847Y-94604290D01* +X113938847Y-94604288D01* +X113938849Y-94604286D01* +X113969550Y-94489709D01* +X113969550Y-94375168D01* +X113972018Y-94367570D01* +X113970769Y-94359682D01* +X113981292Y-94339028D01* +X113988457Y-94316977D01* +X113998546Y-94305165D01* +X114042288Y-94261422D01* +X114096804Y-94233644D01* +X114157236Y-94243215D01* +X114200501Y-94286479D01* +X114207916Y-94305796D01* +X114219618Y-94349464D01* +X114226752Y-94376090D01* +X114286057Y-94478808D01* +X114286059Y-94478810D01* +X114286061Y-94478813D01* +X114369937Y-94562689D01* +X114369939Y-94562690D01* +X114369941Y-94562692D01* +X114472660Y-94621997D01* +X114472661Y-94621997D01* +X114472664Y-94621999D01* +X114587241Y-94652700D01* +X114587243Y-94652700D01* +X114705857Y-94652700D01* +X114705859Y-94652700D01* +X114820436Y-94621999D01* +X114820438Y-94621997D01* +X114820440Y-94621997D01* +X114923158Y-94562692D01* +X114923158Y-94562691D01* +X114923163Y-94562689D01* +X115007039Y-94478813D01* +X115065884Y-94376892D01* +X115066347Y-94376090D01* +X115066347Y-94376088D01* +X115066349Y-94376086D01* +X115097050Y-94261509D01* +X115097050Y-94172600D01* +X115115957Y-94114409D01* +X115165457Y-94078445D01* +X115196050Y-94073600D01* +X116348732Y-94073600D01* +X116406923Y-94092507D01* +X116442887Y-94142007D01* +X116442887Y-94203193D01* +X116434468Y-94222100D01* +X116411252Y-94262309D01* +X116400521Y-94302357D01* +X116380550Y-94376891D01* +X116380550Y-94495509D01* +X116406541Y-94592507D01* +X116411252Y-94610090D01* +X116470557Y-94712808D01* +X116470559Y-94712810D01* +X116470561Y-94712813D01* +X116554437Y-94796689D01* +X116554439Y-94796690D01* +X116554441Y-94796692D01* +X116657160Y-94855997D01* +X116657161Y-94855997D01* +X116657164Y-94855999D01* +X116771741Y-94886700D01* +X116771743Y-94886700D01* +X116890357Y-94886700D01* +X116890359Y-94886700D01* +X117004936Y-94855999D01* +X117004938Y-94855997D01* +X117004940Y-94855997D01* +X117107658Y-94796692D01* +X117107658Y-94796691D01* +X117107663Y-94796689D01* +X117191539Y-94712813D01* +X117194891Y-94707008D01* +X117243336Y-94623100D01* +X117258713Y-94609253D01* +X117270881Y-94592507D01* +X117280943Y-94589237D01* +X117288805Y-94582159D01* +X117329072Y-94573600D01* +X117417733Y-94573600D01* +X117475924Y-94592507D01* +X117511888Y-94642007D01* +X117513360Y-94698222D01* +X117502268Y-94739620D01* +X117501150Y-94743791D01* +X117501150Y-94862409D01* +X117519045Y-94929193D01* +X117531852Y-94976990D01* +X117591157Y-95079708D01* +X117591159Y-95079710D01* +X117591161Y-95079713D01* +X117675037Y-95163589D01* +X117675039Y-95163590D01* +X117699761Y-95177864D01* +X117740701Y-95223334D01* +X117747096Y-95284184D01* +X117716503Y-95337172D01* +X117660607Y-95362058D01* +X117650260Y-95362600D01* +X113533904Y-95362600D01* +X113475713Y-95343693D01* +X113463900Y-95333604D01* +X109712183Y-91581887D01* +X105948119Y-87817823D01* +X105948115Y-87817820D01* +X105841576Y-87746634D01* +X105723197Y-87697600D01* +X105723195Y-87697599D01* +X105723194Y-87697599D01* +X105597519Y-87672600D01* +X103817158Y-87672600D01* +X103758967Y-87653693D01* +X103723003Y-87604193D01* +X103723003Y-87543007D01* +X103747154Y-87503596D01* +X106699854Y-84550896D01* +X106754371Y-84523119D01* +X106769858Y-84521900D01* +X109530344Y-84521900D01* +X109547645Y-84527521D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X113271264Y-79940507D02* +G01* +X113307228Y-79990007D01* +X113307228Y-80051193D01* +X113271264Y-80100693D01* +X113243666Y-80114755D01* +X113232622Y-80118343D01* +X113050303Y-80211238D01* +X112884758Y-80331514D01* +X112740064Y-80476208D01* +X112619788Y-80641753D01* +X112526893Y-80824072D01* +X112463659Y-81018685D01* +X112455040Y-81073099D01* +X112455041Y-81073100D01* +X113298638Y-81073100D01* +X113265725Y-81130107D01* +X113231650Y-81257274D01* +X113231650Y-81388926D01* +X113265725Y-81516093D01* +X113298638Y-81573100D01* +X112455040Y-81573100D01* +X112463659Y-81627514D01* +X112526893Y-81822127D01* +X112619788Y-82004446D01* +X112740064Y-82169991D01* +X112884758Y-82314685D01* +X113050303Y-82434961D01* +X113232626Y-82527858D01* +X113236217Y-82529346D01* +X113235815Y-82530316D01* +X113281777Y-82563707D01* +X113300686Y-82621897D01* +X113281780Y-82680088D01* +X113232281Y-82716054D01* +X113201686Y-82720900D01* +X108108247Y-82720900D01* +X108050056Y-82701993D01* +X108014092Y-82652493D01* +X108014092Y-82591307D01* +X108022511Y-82572400D01* +X108074247Y-82482790D01* +X108074247Y-82482788D01* +X108074249Y-82482786D01* +X108104950Y-82368209D01* +X108104950Y-82273627D01* +X108123857Y-82215436D01* +X108173357Y-82179472D01* +X108234543Y-82179472D01* +X108241828Y-82182160D01* +X108374399Y-82237073D01* +X108558034Y-82273600D01* +X108558035Y-82273600D01* +X108745265Y-82273600D01* +X108745266Y-82273600D01* +X108928901Y-82237073D01* +X109101881Y-82165422D01* +X109101884Y-82165419D01* +X109101888Y-82165418D01* +X109147397Y-82135009D01* +X109257558Y-82061402D01* +X109389952Y-81929008D01* +X109483486Y-81789025D01* +X109493968Y-81773338D01* +X109493969Y-81773334D01* +X109493972Y-81773331D01* +X109565623Y-81600351D01* +X109602150Y-81416716D01* +X109602150Y-81229484D01* +X109602149Y-81229481D01* +X110241150Y-81229481D01* +X110241150Y-81416718D01* +X110277676Y-81600349D01* +X110349327Y-81773329D01* +X110349331Y-81773338D01* +X110405965Y-81858095D01* +X110453348Y-81929008D01* +X110585742Y-82061402D01* +X110652113Y-82105749D01* +X110741411Y-82165418D01* +X110741417Y-82165420D01* +X110741419Y-82165422D01* +X110914399Y-82237073D01* +X111098034Y-82273600D01* +X111098035Y-82273600D01* +X111285265Y-82273600D01* +X111285266Y-82273600D01* +X111468901Y-82237073D01* +X111641881Y-82165422D01* +X111641884Y-82165419D01* +X111641888Y-82165418D01* +X111687397Y-82135009D01* +X111797558Y-82061402D01* +X111929952Y-81929008D01* +X112023486Y-81789025D01* +X112033968Y-81773338D01* +X112033969Y-81773334D01* +X112033972Y-81773331D01* +X112105623Y-81600351D01* +X112142150Y-81416716D01* +X112142150Y-81229484D01* +X112105623Y-81045849D01* +X112033972Y-80872869D01* +X112033970Y-80872867D01* +X112033968Y-80872861D01* +X111965530Y-80770439D01* +X111929952Y-80717192D01* +X111797558Y-80584798D01* +X111742420Y-80547956D01* +X111641888Y-80480781D01* +X111641879Y-80480777D01* +X111468899Y-80409126D01* +X111285268Y-80372600D01* +X111285266Y-80372600D01* +X111098034Y-80372600D01* +X111098031Y-80372600D01* +X110914400Y-80409126D01* +X110741420Y-80480777D01* +X110741411Y-80480781D01* +X110585742Y-80584798D01* +X110585738Y-80584801D01* +X110453351Y-80717188D01* +X110453348Y-80717192D01* +X110349331Y-80872861D01* +X110349327Y-80872870D01* +X110277676Y-81045850D01* +X110241150Y-81229481D01* +X109602149Y-81229481D01* +X109565623Y-81045849D01* +X109493972Y-80872869D01* +X109493970Y-80872867D01* +X109493968Y-80872861D01* +X109425530Y-80770439D01* +X109389952Y-80717192D01* +X109257558Y-80584798D01* +X109202420Y-80547956D01* +X109101888Y-80480781D01* +X109101879Y-80480777D01* +X108928899Y-80409126D01* +X108745268Y-80372600D01* +X108745266Y-80372600D01* +X108558034Y-80372600D01* +X108558031Y-80372600D01* +X108374400Y-80409126D01* +X108201420Y-80480777D01* +X108201411Y-80480781D01* +X108045742Y-80584798D01* +X108045738Y-80584801D01* +X107913351Y-80717188D01* +X107913348Y-80717192D01* +X107809331Y-80872861D01* +X107809327Y-80872870D01* +X107737676Y-81045850D01* +X107701150Y-81229481D01* +X107701150Y-81416718D01* +X107737676Y-81600349D01* +X107737677Y-81600351D01* +X107783009Y-81709792D01* +X107787865Y-81721514D01* +X107792666Y-81782511D01* +X107760696Y-81834680D01* +X107704169Y-81858095D01* +X107696401Y-81858400D01* +X107595141Y-81858400D01* +X107525017Y-81877189D01* +X107480559Y-81889102D01* +X107377841Y-81948407D01* +X107293957Y-82032291D01* +X107234652Y-82135009D01* +X107234651Y-82135014D01* +X107225645Y-82168624D01* +X107192322Y-82219937D01* +X107135200Y-82241864D01* +X107130019Y-82242000D01* +X106773632Y-82242000D01* +X106715441Y-82223093D01* +X106679477Y-82173593D01* +X106679477Y-82112407D01* +X106714067Y-82064796D01* +X106713807Y-82064479D01* +X106715024Y-82063479D01* +X106715441Y-82062907D01* +X106717312Y-82061603D01* +X106717548Y-82061408D01* +X106717558Y-82061402D01* +X106849952Y-81929008D01* +X106943486Y-81789025D01* +X106953968Y-81773338D01* +X106953969Y-81773334D01* +X106953972Y-81773331D01* +X107025623Y-81600351D01* +X107062150Y-81416716D01* +X107062150Y-81229484D01* +X107025623Y-81045849D01* +X106953972Y-80872869D01* +X106953970Y-80872867D01* +X106953968Y-80872861D01* +X106885530Y-80770439D01* +X106849952Y-80717192D01* +X106717558Y-80584798D01* +X106662420Y-80547956D01* +X106561888Y-80480781D01* +X106561879Y-80480777D01* +X106388899Y-80409126D01* +X106205268Y-80372600D01* +X106205266Y-80372600D01* +X106018034Y-80372600D01* +X106018031Y-80372600D01* +X105834400Y-80409126D01* +X105661420Y-80480777D01* +X105661411Y-80480781D01* +X105505742Y-80584798D01* +X105505738Y-80584801D01* +X105373351Y-80717188D01* +X105373348Y-80717192D01* +X105269331Y-80872861D01* +X105269327Y-80872870D01* +X105197676Y-81045850D01* +X105161150Y-81229481D01* +X105161150Y-81416718D01* +X105197676Y-81600349D01* +X105269327Y-81773329D01* +X105269331Y-81773338D01* +X105325965Y-81858095D01* +X105373348Y-81929008D01* +X105505742Y-82061402D01* +X105505746Y-82061405D01* +X105509493Y-82064479D01* +X105508558Y-82065618D01* +X105542548Y-82108731D01* +X105544952Y-82169869D01* +X105510961Y-82220744D01* +X105453558Y-82241924D01* +X105449668Y-82242000D01* +X105007921Y-82242000D01* +X104915853Y-82280135D01* +X103484075Y-83711911D01* +X103429559Y-83739688D01* +X103369127Y-83730117D01* +X103325862Y-83686852D01* +X103315585Y-83631843D01* +X103316650Y-83621420D01* +X103316650Y-83573101D01* +X103316649Y-83573100D01* +X102616651Y-83573100D01* +X102616650Y-83573101D01* +X102616650Y-84298098D01* +X102616651Y-84298099D01* +X102639972Y-84298099D01* +X102739247Y-84287957D01* +X102739255Y-84287955D01* +X102767901Y-84278463D01* +X102829085Y-84278107D01* +X102878794Y-84313781D01* +X102894667Y-84346812D01* +X102905572Y-84387507D01* +X102907952Y-84396390D01* +X102967257Y-84499108D01* +X102967259Y-84499110D01* +X102967261Y-84499113D01* +X103051137Y-84582989D01* +X103051139Y-84582990D01* +X103051141Y-84582992D01* +X103153860Y-84642297D01* +X103153861Y-84642297D01* +X103153864Y-84642299D01* +X103268441Y-84673000D01* +X103268443Y-84673000D01* +X103387057Y-84673000D01* +X103387059Y-84673000D01* +X103501636Y-84642299D01* +X103501638Y-84642297D01* +X103501640Y-84642297D01* +X103604358Y-84582992D01* +X103604358Y-84582991D01* +X103604363Y-84582989D01* +X103688239Y-84499113D01* +X103710296Y-84460909D01* +X103747547Y-84396390D01* +X103747547Y-84396388D01* +X103747549Y-84396386D01* +X103778250Y-84281809D01* +X103778250Y-84167268D01* +X103797157Y-84109077D01* +X103807246Y-84097264D01* +X105132515Y-82771996D01* +X105187032Y-82744219D01* +X105202519Y-82743000D01* +X105723251Y-82743000D01* +X105781442Y-82761907D01* +X105817406Y-82811407D01* +X105817406Y-82872593D01* +X105784633Y-82917699D01* +X105785576Y-82918848D01* +X105781822Y-82921928D01* +X101435144Y-87268604D01* +X101380627Y-87296381D01* +X101365142Y-87297600D01* +X101310129Y-87297600D01* +X101310126Y-87297601D01* +X101216350Y-87312452D01* +X101216345Y-87312454D01* +X101103309Y-87370049D01* +X101013599Y-87459759D01* +X100956004Y-87572795D01* +X100941150Y-87666578D01* +X100941150Y-87739290D01* +X100924466Y-87794291D01* +X100856137Y-87896553D01* +X100788256Y-88060430D01* +X100788254Y-88060436D01* +X100753650Y-88234405D01* +X100753650Y-88411794D01* +X100788254Y-88585763D01* +X100788256Y-88585769D01* +X100856137Y-88749646D01* +X100924466Y-88851909D01* +X100941005Y-88901558D01* +X100941150Y-88904241D01* +X100941151Y-88979618D01* +X100947349Y-89018758D01* +X100947626Y-89023861D01* +X100941007Y-89048733D01* +X100936980Y-89074160D01* +X100933248Y-89077891D01* +X100931892Y-89082989D01* +X100911917Y-89099220D01* +X100893714Y-89117424D01* +X100888502Y-89118249D01* +X100884409Y-89121576D01* +X100858707Y-89122967D01* +X100833282Y-89126994D01* +X100828581Y-89124598D01* +X100823313Y-89124884D01* +X100801706Y-89110905D01* +X100778767Y-89099217D01* +X99993716Y-88314166D01* +X99965939Y-88259649D01* +X99971182Y-88215410D01* +X99969233Y-88214819D01* +X99970641Y-88210174D01* +X99970645Y-88210166D01* +X100005250Y-88036191D01* +X100005250Y-87858808D01* +X100005250Y-84814386D01* +X100024157Y-84756195D01* +X100073657Y-84720231D01* +X100134843Y-84720231D01* +X100153750Y-84728649D01* +X100187264Y-84747999D01* +X100301841Y-84778700D01* +X100301843Y-84778700D01* +X100420457Y-84778700D01* +X100420459Y-84778700D01* +X100535036Y-84747999D01* +X100535038Y-84747997D01* +X100535040Y-84747997D01* +X100637758Y-84688692D01* +X100637758Y-84688691D01* +X100637763Y-84688689D01* +X100721639Y-84604813D01* +X100730014Y-84590307D01* +X100780947Y-84502090D01* +X100780947Y-84502088D01* +X100780949Y-84502086D01* +X100811650Y-84387509D01* +X100811650Y-84272967D01* +X100830557Y-84214776D01* +X100840647Y-84202963D01* +X100909545Y-84134065D01* +X101029014Y-84014597D01* +X101033480Y-84003814D01* +X101073216Y-83957290D01* +X101110667Y-83943736D01* +X101150275Y-83937966D01* +X101262861Y-83882926D01* +X101312876Y-83832910D01* +X101367390Y-83805134D01* +X101427822Y-83814705D01* +X101471087Y-83857969D01* +X101476853Y-83871775D01* +X101480104Y-83881587D01* +X101569075Y-84025829D01* +X101688920Y-84145674D01* +X101833162Y-84234645D01* +X101994046Y-84287956D01* +X102093326Y-84298099D01* +X102116650Y-84298098D01* +X102116650Y-82348101D01* +X102616650Y-82348101D01* +X102616650Y-83073099D01* +X102616651Y-83073100D01* +X103316648Y-83073100D01* +X103316649Y-83073099D01* +X103316649Y-83024777D01* +X103306507Y-82925502D01* +X103306504Y-82925490D01* +X103253195Y-82764612D01* +X103164224Y-82620370D01* +X103044379Y-82500525D01* +X102900137Y-82411554D01* +X102739253Y-82358243D01* +X102639973Y-82348100D01* +X102616651Y-82348100D01* +X102616650Y-82348101D01* +X102116650Y-82348101D01* +X102116650Y-82348100D01* +X102116649Y-82348099D01* +X102093339Y-82348100D01* +X102093334Y-82348101D01* +X101994051Y-82358242D01* +X101994040Y-82358245D01* +X101833162Y-82411554D01* +X101688920Y-82500525D01* +X101569075Y-82620370D01* +X101480103Y-82764613D01* +X101480103Y-82764614D01* +X101476852Y-82774426D01* +X101440600Y-82823715D01* +X101382300Y-82842282D01* +X101324220Y-82823035D01* +X101312881Y-82813294D01* +X101262861Y-82763274D01* +X101150275Y-82708234D01* +X101150276Y-82708234D01* +X101122195Y-82704143D01* +X101077286Y-82697600D01* +X100752157Y-82697600D01* +X100693966Y-82678693D01* +X100658002Y-82629193D01* +X100658002Y-82568007D01* +X100682153Y-82528596D01* +X101558453Y-81652296D01* +X101612970Y-81624519D01* +X101628457Y-81623300D01* +X102964740Y-81623300D01* +X102964741Y-81623300D01* +X103138716Y-81588694D01* +X103302597Y-81520813D01* +X103450085Y-81422264D01* +X103575514Y-81296835D01* +X103674063Y-81149347D01* +X103741944Y-80985466D01* +X103776550Y-80811491D01* +X103776550Y-80634109D01* +X103741944Y-80460134D01* +X103705462Y-80372058D01* +X103674064Y-80296255D01* +X103674064Y-80296254D01* +X103575514Y-80148765D01* +X103517353Y-80090604D01* +X103489576Y-80036087D01* +X103499147Y-79975655D01* +X103542412Y-79932390D01* +X103587357Y-79921600D01* +X113213073Y-79921600D01* +X113271264Y-79940507D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X111371971Y-74564181D02* +G01* +X111389995Y-74584463D01* +X111494511Y-74740882D01* +X111633868Y-74880239D01* +X111797736Y-74989732D01* +X111979815Y-75065151D01* +X112173109Y-75103600D01* +X112173110Y-75103600D01* +X112370190Y-75103600D01* +X112370191Y-75103600D01* +X112563485Y-75065151D01* +X112692234Y-75011822D01* +X112725785Y-74997925D01* +X112786782Y-74993124D01* +X112833674Y-75019385D01* +X113216586Y-75402297D01* +X113216585Y-75402297D01* +X113287053Y-75472764D01* +X113379121Y-75510900D01* +X113379122Y-75510900D01* +X165589848Y-75510900D01* +X165648039Y-75529807D01* +X165684003Y-75579307D01* +X165684003Y-75640493D01* +X165675584Y-75659400D01* +X165620152Y-75755409D01* +X165615058Y-75774421D01* +X165589450Y-75869991D01* +X165589450Y-75988609D01* +X165597688Y-76019352D01* +X165620152Y-76103190D01* +X165679457Y-76205908D01* +X165679459Y-76205910D01* +X165679461Y-76205913D01* +X165763337Y-76289789D01* +X165763339Y-76289790D01* +X165763341Y-76289792D01* +X165866060Y-76349097D01* +X165866061Y-76349097D01* +X165866064Y-76349099D01* +X165980641Y-76379800D01* +X165980643Y-76379800D01* +X166099258Y-76379800D01* +X166099259Y-76379800D01* +X166200329Y-76352718D01* +X166261430Y-76355919D01* +X166308980Y-76394424D01* +X166324816Y-76453525D01* +X166302890Y-76510646D01* +X166295956Y-76518348D01* +X164386370Y-78427934D01* +X164328214Y-78514973D01* +X164315183Y-78534475D01* +X164304824Y-78559486D01* +X164265087Y-78606012D01* +X164213360Y-78620600D01* +X107439318Y-78620600D01* +X107381127Y-78601693D01* +X107345163Y-78552193D01* +X107345163Y-78491007D01* +X107369312Y-78451598D01* +X108043819Y-77777091D01* +X162882850Y-77777091D01* +X162882850Y-77895709D01* +X162896913Y-77948193D01* +X162913552Y-78010290D01* +X162972857Y-78113008D01* +X162972859Y-78113010D01* +X162972861Y-78113013D01* +X163056737Y-78196889D01* +X163056739Y-78196890D01* +X163056741Y-78196892D01* +X163159460Y-78256197D01* +X163159461Y-78256197D01* +X163159464Y-78256199D01* +X163274041Y-78286900D01* +X163274043Y-78286900D01* +X163392657Y-78286900D01* +X163392659Y-78286900D01* +X163507236Y-78256199D01* +X163507238Y-78256197D01* +X163507240Y-78256197D01* +X163609958Y-78196892D01* +X163609958Y-78196891D01* +X163609963Y-78196889D01* +X163693839Y-78113013D01* +X163706231Y-78091550D01* +X163753147Y-78010290D01* +X163753147Y-78010288D01* +X163753149Y-78010286D01* +X163783850Y-77895709D01* +X163783850Y-77777091D01* +X163753149Y-77662514D01* +X163753147Y-77662511D01* +X163753147Y-77662509D01* +X163693842Y-77559791D01* +X163693840Y-77559789D01* +X163693839Y-77559787D01* +X163609963Y-77475911D01* +X163609960Y-77475909D01* +X163609958Y-77475907D01* +X163507239Y-77416602D01* +X163507240Y-77416602D01* +X163493701Y-77412974D01* +X163392659Y-77385900D01* +X163274041Y-77385900D01* +X163203917Y-77404689D01* +X163159459Y-77416602D01* +X163056741Y-77475907D01* +X162972857Y-77559791D01* +X162913552Y-77662509D01* +X162913551Y-77662514D01* +X162882850Y-77777091D01* +X108043819Y-77777091D01* +X111214014Y-74606897D01* +X111216214Y-74601584D01* +X111255947Y-74555057D01* +X111315441Y-74540770D01* +X111371971Y-74564181D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X170012289Y-72687207D02* +G01* +X170048253Y-72736707D01* +X170048253Y-72797893D01* +X170012289Y-72847393D01* +X169991986Y-72858762D01* +X169991252Y-72859066D01* +X169990122Y-72859535D01* +X169883584Y-72930720D01* +X166628998Y-76185306D01* +X166574481Y-76213083D01* +X166514049Y-76203512D01* +X166470784Y-76160247D01* +X166461213Y-76099815D01* +X166463368Y-76089678D01* +X166468581Y-76070225D01* +X166490450Y-75988609D01* +X166490450Y-75869991D01* +X166481214Y-75835522D01* +X166484417Y-75774421D01* +X166522922Y-75726871D01* +X166576841Y-75710900D01* +X166586357Y-75710900D01* +X166586359Y-75710900D01* +X166700936Y-75680199D01* +X166700938Y-75680197D01* +X166700940Y-75680197D01* +X166803658Y-75620892D01* +X166803658Y-75620891D01* +X166803663Y-75620889D01* +X166887539Y-75537013D01* +X166887542Y-75537008D01* +X166946847Y-75434290D01* +X166946847Y-75434288D01* +X166946849Y-75434286D01* +X166977550Y-75319709D01* +X166977550Y-75201091D01* +X166946849Y-75086514D01* +X166946847Y-75086511D01* +X166946847Y-75086509D01* +X166887542Y-74983791D01* +X166887540Y-74983789D01* +X166887539Y-74983787D01* +X166803663Y-74899911D01* +X166803660Y-74899909D01* +X166803658Y-74899907D01* +X166700939Y-74840602D01* +X166700940Y-74840602D01* +X166687401Y-74836974D01* +X166586359Y-74809900D01* +X166467741Y-74809900D01* +X166397617Y-74828689D01* +X166353159Y-74840602D01* +X166250441Y-74899907D01* +X166250440Y-74899908D01* +X166250437Y-74899910D01* +X166250437Y-74899911D01* +X166169442Y-74980905D01* +X166114928Y-75008681D01* +X166099441Y-75009900D01* +X156198779Y-75009900D01* +X156140588Y-74990993D01* +X156104624Y-74941493D01* +X156104624Y-74880307D01* +X156128775Y-74840896D01* +X156165090Y-74804581D01* +X156228789Y-74740882D01* +X156338282Y-74577014D01* +X156413701Y-74394935D01* +X156452150Y-74201641D01* +X156452150Y-74004559D01* +X156413701Y-73811265D01* +X156338282Y-73629186D01* +X156228789Y-73465318D01* +X156089432Y-73325961D01* +X155960606Y-73239882D01* +X155925563Y-73216467D01* +X155743485Y-73141049D01* +X155550193Y-73102600D01* +X155550191Y-73102600D01* +X155353109Y-73102600D01* +X155353106Y-73102600D01* +X155159815Y-73141049D01* +X155159813Y-73141049D01* +X154977736Y-73216467D01* +X154813868Y-73325961D01* +X154813864Y-73325964D01* +X154674514Y-73465314D01* +X154674511Y-73465318D01* +X154565017Y-73629186D01* +X154489599Y-73811263D01* +X154454486Y-73987784D01* +X154424589Y-74041167D01* +X154369023Y-74066783D01* +X154309014Y-74054846D01* +X154267481Y-74009916D01* +X154259607Y-73983956D01* +X154228409Y-73786978D01* +X154162745Y-73584884D01* +X154066273Y-73395546D01* +X154066269Y-73395540D01* +X154026920Y-73341382D01* +X154026919Y-73341382D01* +X153394612Y-73973690D01* +X153377575Y-73910107D01* +X153311749Y-73796093D01* +X153218657Y-73703001D01* +X153104643Y-73637175D01* +X153041057Y-73620137D01* +X153673366Y-72987829D01* +X153673366Y-72987828D01* +X153619209Y-72948480D01* +X153619203Y-72948476D01* +X153436745Y-72855510D01* +X153393480Y-72812245D01* +X153383909Y-72751813D01* +X153411686Y-72697297D01* +X153466203Y-72669519D01* +X153481690Y-72668300D01* +X169954098Y-72668300D01* +X170012289Y-72687207D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X160692473Y-68564807D02* +G01* +X160728437Y-68614307D01* +X160728437Y-68675493D01* +X160704286Y-68714903D01* +X159223685Y-70195504D01* +X157748385Y-71670804D01* +X157693868Y-71698581D01* +X157678381Y-71699800D01* +X116914621Y-71699800D01* +X116822553Y-71737935D01* +X115373672Y-73186814D01* +X115319156Y-73214591D01* +X115265784Y-73208274D01* +X115103485Y-73141049D01* +X114910193Y-73102600D01* +X114910191Y-73102600D01* +X114713109Y-73102600D01* +X114713106Y-73102600D01* +X114519815Y-73141049D01* +X114519813Y-73141049D01* +X114337736Y-73216467D01* +X114173868Y-73325961D01* +X114173864Y-73325964D01* +X114034514Y-73465314D01* +X114034511Y-73465318D01* +X113925017Y-73629186D01* +X113849599Y-73811263D01* +X113849599Y-73811265D01* +X113811150Y-74004556D01* +X113811150Y-74201643D01* +X113819773Y-74244992D01* +X113849494Y-74394409D01* +X113849599Y-74394934D01* +X113849599Y-74394936D01* +X113925017Y-74577013D01* +X113929995Y-74584463D01* +X114034511Y-74740882D01* +X114034514Y-74740885D01* +X114134525Y-74840896D01* +X114162302Y-74895413D01* +X114152731Y-74955845D01* +X114109466Y-74999110D01* +X114064521Y-75009900D01* +X113573719Y-75009900D01* +X113515528Y-74990993D01* +X113503715Y-74980904D01* +X113187935Y-74665124D01* +X113160158Y-74610607D01* +X113166475Y-74557235D01* +X113190894Y-74498280D01* +X113233701Y-74394935D01* +X113272150Y-74201641D01* +X113272150Y-74004559D01* +X113233701Y-73811265D01* +X113158282Y-73629186D01* +X113048789Y-73465318D01* +X112909432Y-73325961D01* +X112780606Y-73239882D01* +X112745563Y-73216467D01* +X112563485Y-73141049D01* +X112370193Y-73102600D01* +X112370191Y-73102600D01* +X112201218Y-73102600D01* +X112143027Y-73083693D01* +X112107063Y-73034193D01* +X112107063Y-72973007D01* +X112131214Y-72933596D01* +X115741314Y-69323496D01* +X115795831Y-69295719D01* +X115811318Y-69294500D01* +X147233641Y-69294500D01* +X147291832Y-69313407D01* +X147303638Y-69323490D01* +X147384637Y-69404489D01* +X147384639Y-69404490D01* +X147384641Y-69404492D01* +X147487360Y-69463797D01* +X147487361Y-69463797D01* +X147487364Y-69463799D01* +X147601941Y-69494500D01* +X147601943Y-69494500D01* +X147720557Y-69494500D01* +X147720559Y-69494500D01* +X147835136Y-69463799D01* +X147835138Y-69463797D01* +X147835140Y-69463797D01* +X147937858Y-69404492D01* +X147937858Y-69404491D01* +X147937863Y-69404489D01* +X148021739Y-69320613D01* +X148021742Y-69320608D01* +X148081047Y-69217890D01* +X148081047Y-69217888D01* +X148081049Y-69217886D01* +X148111750Y-69103309D01* +X148111750Y-68984691D01* +X148081049Y-68870114D01* +X148081047Y-68870111D01* +X148081047Y-68870109D01* +X148021742Y-68767391D01* +X148021740Y-68767389D01* +X148021739Y-68767387D01* +X147969253Y-68714901D01* +X147941478Y-68660387D01* +X147951049Y-68599955D01* +X147994314Y-68556690D01* +X148039259Y-68545900D01* +X160634282Y-68545900D01* +X160692473Y-68564807D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X152399801Y-72687207D02* +G01* +X152435765Y-72736707D01* +X152435765Y-72797893D01* +X152399801Y-72847393D01* +X152386555Y-72855510D01* +X152204096Y-72948476D01* +X152204092Y-72948478D01* +X152149932Y-72987828D01* +X152782241Y-73620137D01* +X152718657Y-73637175D01* +X152604643Y-73703001D01* +X152511551Y-73796093D01* +X152445725Y-73910107D01* +X152428687Y-73973691D01* +X151796378Y-73341382D01* +X151757028Y-73395542D01* +X151757026Y-73395546D01* +X151660554Y-73584884D01* +X151594890Y-73786978D01* +X151563692Y-73983956D01* +X151535914Y-74038473D01* +X151481398Y-74066250D01* +X151420966Y-74056679D01* +X151377701Y-74013414D01* +X151368813Y-73987783D01* +X151360642Y-73946704D01* +X151333701Y-73811265D01* +X151258282Y-73629186D01* +X151148789Y-73465318D01* +X151009432Y-73325961D01* +X150880606Y-73239882D01* +X150845563Y-73216467D01* +X150663485Y-73141049D01* +X150470193Y-73102600D01* +X150470191Y-73102600D01* +X150273109Y-73102600D01* +X150273106Y-73102600D01* +X150079815Y-73141049D01* +X150079813Y-73141049D01* +X149897736Y-73216467D01* +X149733868Y-73325961D01* +X149733864Y-73325964D01* +X149594514Y-73465314D01* +X149594511Y-73465318D01* +X149485017Y-73629186D01* +X149409599Y-73811263D01* +X149409599Y-73811265D01* +X149371150Y-74004556D01* +X149371150Y-74201643D01* +X149379773Y-74244992D01* +X149409494Y-74394409D01* +X149409599Y-74394934D01* +X149409599Y-74394936D01* +X149485017Y-74577013D01* +X149489995Y-74584463D01* +X149594511Y-74740882D01* +X149594514Y-74740885D01* +X149694525Y-74840896D01* +X149722302Y-74895413D01* +X149712731Y-74955845D01* +X149669466Y-74999110D01* +X149624521Y-75009900D01* +X148578779Y-75009900D01* +X148520588Y-74990993D01* +X148484624Y-74941493D01* +X148484624Y-74880307D01* +X148508775Y-74840896D01* +X148545090Y-74804581D01* +X148608789Y-74740882D01* +X148718282Y-74577014D01* +X148793701Y-74394935D01* +X148832150Y-74201641D01* +X148832150Y-74004559D01* +X148793701Y-73811265D01* +X148718282Y-73629186D01* +X148608789Y-73465318D01* +X148469432Y-73325961D01* +X148340606Y-73239882D01* +X148305563Y-73216467D01* +X148123485Y-73141049D01* +X147930193Y-73102600D01* +X147930191Y-73102600D01* +X147733109Y-73102600D01* +X147733106Y-73102600D01* +X147539815Y-73141049D01* +X147539813Y-73141049D01* +X147357736Y-73216467D01* +X147193868Y-73325961D01* +X147193864Y-73325964D01* +X147054514Y-73465314D01* +X147054511Y-73465318D01* +X146945017Y-73629186D01* +X146869599Y-73811263D01* +X146869599Y-73811265D01* +X146831150Y-74004556D01* +X146831150Y-74201643D01* +X146839773Y-74244992D01* +X146869494Y-74394409D01* +X146869599Y-74394934D01* +X146869599Y-74394936D01* +X146945017Y-74577013D01* +X146949995Y-74584463D01* +X147054511Y-74740882D01* +X147054514Y-74740885D01* +X147154525Y-74840896D01* +X147182302Y-74895413D01* +X147172731Y-74955845D01* +X147129466Y-74999110D01* +X147084521Y-75009900D01* +X146038779Y-75009900D01* +X145980588Y-74990993D01* +X145944624Y-74941493D01* +X145944624Y-74880307D01* +X145968775Y-74840896D01* +X146005090Y-74804581D01* +X146068789Y-74740882D01* +X146178282Y-74577014D01* +X146253701Y-74394935D01* +X146292150Y-74201641D01* +X146292150Y-74004559D01* +X146253701Y-73811265D01* +X146178282Y-73629186D01* +X146068789Y-73465318D01* +X145929432Y-73325961D01* +X145800606Y-73239882D01* +X145765563Y-73216467D01* +X145583485Y-73141049D01* +X145390193Y-73102600D01* +X145390191Y-73102600D01* +X145193109Y-73102600D01* +X145193106Y-73102600D01* +X144999815Y-73141049D01* +X144999813Y-73141049D01* +X144817736Y-73216467D01* +X144653868Y-73325961D01* +X144653864Y-73325964D01* +X144514514Y-73465314D01* +X144514511Y-73465318D01* +X144405017Y-73629186D01* +X144329599Y-73811263D01* +X144329599Y-73811265D01* +X144291150Y-74004556D01* +X144291150Y-74201643D01* +X144299773Y-74244992D01* +X144329494Y-74394409D01* +X144329599Y-74394934D01* +X144329599Y-74394936D01* +X144405017Y-74577013D01* +X144409995Y-74584463D01* +X144514511Y-74740882D01* +X144514514Y-74740885D01* +X144614525Y-74840896D01* +X144642302Y-74895413D01* +X144632731Y-74955845D01* +X144589466Y-74999110D01* +X144544521Y-75009900D01* +X143498779Y-75009900D01* +X143440588Y-74990993D01* +X143404624Y-74941493D01* +X143404624Y-74880307D01* +X143428775Y-74840896D01* +X143465090Y-74804581D01* +X143528789Y-74740882D01* +X143638282Y-74577014D01* +X143713701Y-74394935D01* +X143752150Y-74201641D01* +X143752150Y-74004559D01* +X143713701Y-73811265D01* +X143638282Y-73629186D01* +X143528789Y-73465318D01* +X143389432Y-73325961D01* +X143260606Y-73239882D01* +X143225563Y-73216467D01* +X143043485Y-73141049D01* +X142850193Y-73102600D01* +X142850191Y-73102600D01* +X142653109Y-73102600D01* +X142653106Y-73102600D01* +X142459815Y-73141049D01* +X142459813Y-73141049D01* +X142277736Y-73216467D01* +X142113868Y-73325961D01* +X142113864Y-73325964D01* +X141974514Y-73465314D01* +X141974511Y-73465318D01* +X141865017Y-73629186D01* +X141789599Y-73811263D01* +X141789599Y-73811265D01* +X141751150Y-74004556D01* +X141751150Y-74201643D01* +X141759773Y-74244992D01* +X141789494Y-74394409D01* +X141789599Y-74394934D01* +X141789599Y-74394936D01* +X141865017Y-74577013D01* +X141869995Y-74584463D01* +X141974511Y-74740882D01* +X141974514Y-74740885D01* +X142074525Y-74840896D01* +X142102302Y-74895413D01* +X142092731Y-74955845D01* +X142049466Y-74999110D01* +X142004521Y-75009900D01* +X140958779Y-75009900D01* +X140900588Y-74990993D01* +X140864624Y-74941493D01* +X140864624Y-74880307D01* +X140888775Y-74840896D01* +X140925090Y-74804581D01* +X140988789Y-74740882D01* +X141098282Y-74577014D01* +X141173701Y-74394935D01* +X141212150Y-74201641D01* +X141212150Y-74004559D01* +X141173701Y-73811265D01* +X141098282Y-73629186D01* +X140988789Y-73465318D01* +X140849432Y-73325961D01* +X140720606Y-73239882D01* +X140685563Y-73216467D01* +X140503485Y-73141049D01* +X140310193Y-73102600D01* +X140310191Y-73102600D01* +X140113109Y-73102600D01* +X140113106Y-73102600D01* +X139919815Y-73141049D01* +X139919813Y-73141049D01* +X139737736Y-73216467D01* +X139573868Y-73325961D01* +X139573864Y-73325964D01* +X139434514Y-73465314D01* +X139434511Y-73465318D01* +X139325017Y-73629186D01* +X139249599Y-73811263D01* +X139249599Y-73811265D01* +X139211150Y-74004556D01* +X139211150Y-74201643D01* +X139219773Y-74244992D01* +X139249494Y-74394409D01* +X139249599Y-74394934D01* +X139249599Y-74394936D01* +X139325017Y-74577013D01* +X139329995Y-74584463D01* +X139434511Y-74740882D01* +X139434514Y-74740885D01* +X139534525Y-74840896D01* +X139562302Y-74895413D01* +X139552731Y-74955845D01* +X139509466Y-74999110D01* +X139464521Y-75009900D01* +X138418779Y-75009900D01* +X138360588Y-74990993D01* +X138324624Y-74941493D01* +X138324624Y-74880307D01* +X138348775Y-74840896D01* +X138385090Y-74804581D01* +X138448789Y-74740882D01* +X138558282Y-74577014D01* +X138633701Y-74394935D01* +X138672150Y-74201641D01* +X138672150Y-74004559D01* +X138633701Y-73811265D01* +X138566473Y-73648963D01* +X138561673Y-73587968D01* +X138587935Y-73541075D01* +X139431716Y-72697296D01* +X139486232Y-72669519D01* +X139501719Y-72668300D01* +X152341610Y-72668300D01* +X152399801Y-72687207D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X88114901Y-51366007D02* +G01* +X88150865Y-51415507D01* +X88150865Y-51476693D01* +X88144919Y-51491046D01* +X88116004Y-51547793D01* +X88101150Y-51641576D01* +X88101150Y-57004623D01* +X88101151Y-57004625D01* +X88116002Y-57098401D01* +X88116004Y-57098406D01* +X88166845Y-57198187D01* +X88173600Y-57211443D01* +X88263307Y-57301150D01* +X88263309Y-57301151D01* +X88263311Y-57301152D01* +X88337095Y-57338748D01* +X88380360Y-57382012D01* +X88391150Y-57426957D01* +X88391150Y-60423600D01* +X88372243Y-60481791D01* +X88322743Y-60517755D01* +X88292150Y-60522600D01* +X88010129Y-60522600D01* +X88010126Y-60522601D01* +X87916350Y-60537452D01* +X87916345Y-60537454D01* +X87803309Y-60595049D01* +X87713599Y-60684759D01* +X87656004Y-60797795D01* +X87641150Y-60891578D01* +X87641150Y-62754621D01* +X87641151Y-62754623D01* +X87656002Y-62848399D01* +X87656003Y-62848404D01* +X87678220Y-62892006D01* +X87688865Y-62912898D01* +X87698066Y-62930954D01* +X87707638Y-62991386D01* +X87679861Y-63045903D01* +X87625345Y-63073681D01* +X87609857Y-63074900D01* +X85321804Y-63074900D01* +X85263613Y-63055993D01* +X85251800Y-63045904D01* +X84323500Y-62117604D01* +X84295723Y-62063087D01* +X84305294Y-62002655D01* +X84348559Y-61959390D01* +X84393504Y-61948600D01* +X84599907Y-61948600D01* +X84599910Y-61948600D01* +X84668043Y-61938673D01* +X84773133Y-61887298D01* +X84855848Y-61804583D01* +X84907223Y-61699493D01* +X84917150Y-61631360D01* +X84917150Y-61573101D01* +X85116651Y-61573101D01* +X85116651Y-61654682D01* +X85123058Y-61725203D01* +X85123060Y-61725209D01* +X85173629Y-61887492D01* +X85173632Y-61887500D01* +X85261574Y-62032972D01* +X85381777Y-62153175D01* +X85527249Y-62241117D01* +X85527257Y-62241120D01* +X85689539Y-62291689D01* +X85689545Y-62291691D01* +X85760075Y-62298098D01* +X85766650Y-62298098D01* +X85766650Y-61573101D01* +X86266650Y-61573101D01* +X86266650Y-62298098D01* +X86266651Y-62298099D01* +X86273216Y-62298099D01* +X86273232Y-62298098D01* +X86343753Y-62291691D01* +X86343759Y-62291689D01* +X86506042Y-62241120D01* +X86506050Y-62241117D01* +X86651522Y-62153175D01* +X86771725Y-62032972D01* +X86859667Y-61887500D01* +X86859670Y-61887492D01* +X86910239Y-61725210D01* +X86910241Y-61725204D01* +X86916649Y-61654681D01* +X86916650Y-61654668D01* +X86916650Y-61573101D01* +X86916649Y-61573100D01* +X86266651Y-61573100D01* +X86266650Y-61573101D01* +X85766650Y-61573101D01* +X85766649Y-61573100D01* +X85116652Y-61573100D01* +X85116651Y-61573101D01* +X84917150Y-61573101D01* +X84917150Y-61167866D01* +X84936057Y-61109675D01* +X84946139Y-61097870D01* +X84973778Y-61070231D01* +X85028290Y-61042455D01* +X85088722Y-61052026D01* +X85113783Y-61070232D01* +X85116651Y-61073100D01* +X85766649Y-61073100D01* +X85766650Y-61073099D01* +X85766650Y-60348101D01* +X86266650Y-60348101D01* +X86266650Y-61073099D01* +X86266651Y-61073100D01* +X86916648Y-61073100D01* +X86916649Y-61073099D01* +X86916649Y-60991533D01* +X86916648Y-60991517D01* +X86910241Y-60920996D01* +X86910239Y-60920990D01* +X86859670Y-60758707D01* +X86859667Y-60758699D01* +X86771725Y-60613227D01* +X86651522Y-60493024D01* +X86506050Y-60405082D01* +X86506042Y-60405079D01* +X86343760Y-60354510D01* +X86343754Y-60354508D01* +X86273231Y-60348100D01* +X86266651Y-60348100D01* +X86266650Y-60348101D01* +X85766650Y-60348101D01* +X85766650Y-60318367D01* +X85769118Y-60310769D01* +X85767869Y-60302880D01* +X85778393Y-60282224D01* +X85785557Y-60260176D01* +X85795642Y-60248366D01* +X86729645Y-59314364D01* +X86729647Y-59314364D01* +X86800114Y-59243897D01* +X86811284Y-59216930D01* +X86838251Y-59151828D01* +X86838251Y-59052172D01* +X86838251Y-59044198D01* +X86838250Y-59044184D01* +X86838250Y-53429371D01* +X86800114Y-53337303D01* +X86729647Y-53266835D01* +X86729647Y-53266836D01* +X86281980Y-52819169D01* +X86254203Y-52764652D01* +X86263774Y-52704220D01* +X86281977Y-52679164D01* +X86329700Y-52631442D01* +X86387296Y-52518404D01* +X86402150Y-52424619D01* +X86402149Y-51661582D01* +X86402149Y-51661581D01* +X86402149Y-51661578D01* +X86402148Y-51661576D01* +X86387297Y-51567800D01* +X86387296Y-51567797D01* +X86387296Y-51567796D01* +X86348188Y-51491044D01* +X86338618Y-51430613D01* +X86366395Y-51376097D01* +X86420912Y-51348319D01* +X86436399Y-51347100D01* +X88056710Y-51347100D01* +X88114901Y-51366007D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X214650341Y-40842507D02* +G01* +X214686305Y-40892007D01* +X214691150Y-40922600D01* +X214691150Y-139623616D01* +X214672243Y-139681807D01* +X214622743Y-139717771D01* +X214591973Y-139722616D01* +X80960373Y-139483276D01* +X80902216Y-139464264D01* +X80866341Y-139414700D01* +X80861550Y-139384376D01* +X80861170Y-139008128D01* +X80859853Y-137705043D01* +X197691650Y-137705043D01* +X197691650Y-137941156D01* +X197728584Y-138174352D01* +X197728585Y-138174356D01* +X197801542Y-138398893D01* +X197801544Y-138398896D01* +X197908734Y-138609269D01* +X197968989Y-138692205D01* +X198667861Y-137993332D01* +X198679132Y-138035392D01* +X198751540Y-138160808D01* +X198853942Y-138263210D01* +X198979358Y-138335618D01* +X199021415Y-138346887D01* +X198322543Y-139045759D01* +X198405475Y-139106013D01* +X198405479Y-139106015D01* +X198615853Y-139213205D01* +X198615856Y-139213207D01* +X198840393Y-139286164D01* +X198840397Y-139286165D01* +X199073594Y-139323100D01* +X199309706Y-139323100D01* +X199542902Y-139286165D01* +X199542906Y-139286164D01* +X199767443Y-139213207D01* +X199767446Y-139213205D01* +X199977820Y-139106015D01* +X199977826Y-139106011D01* +X200060755Y-139045759D01* +X200060755Y-139045758D01* +X199361884Y-138346887D01* +X199403942Y-138335618D01* +X199529358Y-138263210D01* +X199631760Y-138160808D01* +X199704168Y-138035392D01* +X199715437Y-137993334D01* +X200414308Y-138692205D01* +X200414309Y-138692205D01* +X200474561Y-138609276D01* +X200474565Y-138609270D01* +X200581755Y-138398896D01* +X200581757Y-138398893D01* +X200654714Y-138174356D01* +X200654715Y-138174352D01* +X200691650Y-137941156D01* +X200691650Y-137705043D01* +X204191650Y-137705043D01* +X204191650Y-137941156D01* +X204228584Y-138174352D01* +X204228585Y-138174356D01* +X204301542Y-138398893D01* +X204301544Y-138398896D01* +X204408734Y-138609269D01* +X204468989Y-138692205D01* +X205167861Y-137993332D01* +X205179132Y-138035392D01* +X205251540Y-138160808D01* +X205353942Y-138263210D01* +X205479358Y-138335618D01* +X205521415Y-138346887D01* +X204822543Y-139045759D01* +X204905475Y-139106013D01* +X204905479Y-139106015D01* +X205115853Y-139213205D01* +X205115856Y-139213207D01* +X205340393Y-139286164D01* +X205340397Y-139286165D01* +X205573594Y-139323100D01* +X205809706Y-139323100D01* +X206042902Y-139286165D01* +X206042906Y-139286164D01* +X206267443Y-139213207D01* +X206267446Y-139213205D01* +X206477820Y-139106015D01* +X206477826Y-139106011D01* +X206560755Y-139045759D01* +X206560755Y-139045758D01* +X205861884Y-138346887D01* +X205903942Y-138335618D01* +X206029358Y-138263210D01* +X206131760Y-138160808D01* +X206204168Y-138035392D01* +X206215437Y-137993334D01* +X206914308Y-138692205D01* +X206914309Y-138692205D01* +X206974561Y-138609276D01* +X206974565Y-138609270D01* +X207081755Y-138398896D01* +X207081757Y-138398893D01* +X207154714Y-138174356D01* +X207154715Y-138174352D01* +X207191650Y-137941156D01* +X207191650Y-137705043D01* +X207154715Y-137471847D01* +X207154714Y-137471843D01* +X207081757Y-137247306D01* +X207081755Y-137247303D01* +X206974565Y-137036929D01* +X206974563Y-137036925D01* +X206914309Y-136953993D01* +X206215437Y-137652865D01* +X206204168Y-137610808D01* +X206131760Y-137485392D01* +X206029358Y-137382990D01* +X205903942Y-137310582D01* +X205861882Y-137299311D01* +X206560755Y-136600439D01* +X206477819Y-136540184D01* +X206267446Y-136432994D01* +X206267443Y-136432992D01* +X206042906Y-136360035D01* +X206042902Y-136360034D01* +X205809706Y-136323100D01* +X205573594Y-136323100D01* +X205340397Y-136360034D01* +X205340393Y-136360035D01* +X205115856Y-136432992D01* +X205115853Y-136432994D01* +X204905473Y-136540188D01* +X204822543Y-136600439D01* +X205521416Y-137299312D01* +X205479358Y-137310582D01* +X205353942Y-137382990D01* +X205251540Y-137485392D01* +X205179132Y-137610808D01* +X205167862Y-137652866D01* +X204468989Y-136953993D01* +X204408738Y-137036923D01* +X204301544Y-137247303D01* +X204301542Y-137247306D01* +X204228585Y-137471843D01* +X204228584Y-137471847D01* +X204191650Y-137705043D01* +X200691650Y-137705043D01* +X200654715Y-137471847D01* +X200654714Y-137471843D01* +X200581757Y-137247306D01* +X200581755Y-137247303D01* +X200474565Y-137036929D01* +X200474563Y-137036925D01* +X200414309Y-136953993D01* +X199715437Y-137652865D01* +X199704168Y-137610808D01* +X199631760Y-137485392D01* +X199529358Y-137382990D01* +X199403942Y-137310582D01* +X199361882Y-137299311D01* +X200060755Y-136600439D01* +X199977819Y-136540184D01* +X199767446Y-136432994D01* +X199767443Y-136432992D01* +X199542906Y-136360035D01* +X199542902Y-136360034D01* +X199309706Y-136323100D01* +X199073594Y-136323100D01* +X198840397Y-136360034D01* +X198840393Y-136360035D01* +X198615856Y-136432992D01* +X198615853Y-136432994D01* +X198405473Y-136540188D01* +X198322543Y-136600439D01* +X199021416Y-137299312D01* +X198979358Y-137310582D01* +X198853942Y-137382990D01* +X198751540Y-137485392D01* +X198679132Y-137610808D01* +X198667862Y-137652866D01* +X197968989Y-136953993D01* +X197908738Y-137036923D01* +X197801544Y-137247303D01* +X197801542Y-137247306D01* +X197728585Y-137471843D01* +X197728584Y-137471847D01* +X197691650Y-137705043D01* +X80859853Y-137705043D01* +X80859849Y-137701257D01* +X80858681Y-136545831D01* +X80857322Y-135201810D01* +X83341150Y-135201810D01* +X83341150Y-135444389D01* +X83372811Y-135684881D01* +X83372811Y-135684886D01* +X83372812Y-135684889D01* +X83435517Y-135918907D01* +X83435594Y-135919192D01* +X83435598Y-135919205D01* +X83528422Y-136143304D01* +X83528424Y-136143308D01* +X83528426Y-136143312D01* +X83643191Y-136342090D01* +X83649716Y-136353392D01* +X83797379Y-136545831D01* +X83797381Y-136545833D01* +X83797385Y-136545838D01* +X83968912Y-136717365D01* +X83968916Y-136717368D01* +X83968918Y-136717370D01* +X84161357Y-136865033D01* +X84161361Y-136865036D01* +X84371438Y-136986324D01* +X84595550Y-137079154D01* +X84829861Y-137141938D01* +X85070362Y-137173600D01* +X85070363Y-137173600D01* +X85312937Y-137173600D01* +X85312938Y-137173600D01* +X85553439Y-137141938D01* +X85787750Y-137079154D01* +X86011862Y-136986324D01* +X86221939Y-136865036D01* +X86414388Y-136717365D01* +X86585915Y-136545838D01* +X86733586Y-136353389D01* +X86854874Y-136143312D01* +X86947704Y-135919200D01* +X87010488Y-135684889D01* +X87029472Y-135540691D01* +X141449500Y-135540691D01* +X141449500Y-135659309D01* +X141476574Y-135760351D01* +X141480202Y-135773890D01* +X141539507Y-135876608D01* +X141539509Y-135876610D01* +X141539511Y-135876613D01* +X141623387Y-135960489D01* +X141623389Y-135960490D01* +X141623391Y-135960492D01* +X141726110Y-136019797D01* +X141726111Y-136019797D01* +X141726114Y-136019799D01* +X141840691Y-136050500D01* +X141840693Y-136050500D01* +X141959307Y-136050500D01* +X141959309Y-136050500D01* +X142073886Y-136019799D01* +X142073888Y-136019797D01* +X142073890Y-136019797D01* +X142176608Y-135960492D01* +X142176608Y-135960491D01* +X142176613Y-135960489D01* +X142257607Y-135879494D01* +X142312122Y-135851719D01* +X142327609Y-135850500D01* +X143425500Y-135850500D01* +X143483691Y-135869407D01* +X143519655Y-135918907D01* +X143524500Y-135949500D01* +X143524500Y-136114827D01* +X143533232Y-136158720D01* +X143533233Y-136158722D01* +X143566496Y-136208504D01* +X143616278Y-136241767D01* +X143627327Y-136243964D01* +X143660172Y-136250499D01* +X143660178Y-136250499D01* +X143660180Y-136250500D01* +X143660181Y-136250500D01* +X144939819Y-136250500D01* +X144939820Y-136250500D01* +X144939821Y-136250499D01* +X144939827Y-136250499D01* +X144961623Y-136246162D01* +X144983722Y-136241767D01* +X145033504Y-136208504D01* +X145066767Y-136158722D01* +X145068935Y-136147824D01* +X150924999Y-136147824D01* +X150931401Y-136207370D01* +X150931403Y-136207381D01* +X150981646Y-136342088D01* +X150981647Y-136342090D01* +X151067807Y-136457184D01* +X151067815Y-136457192D01* +X151182909Y-136543352D01* +X151182911Y-136543353D01* +X151317618Y-136593596D01* +X151317629Y-136593598D01* +X151377176Y-136600000D01* +X151799999Y-136600000D01* +X151800000Y-136599999D01* +X151800000Y-135850001D01* +X152300000Y-135850001D01* +X152300000Y-136599999D01* +X152300001Y-136600000D01* +X152722824Y-136600000D01* +X152782370Y-136593598D01* +X152782381Y-136593596D01* +X152911564Y-136545414D01* +X152911567Y-136545413D01* +X152917090Y-136543352D01* +X153032184Y-136457192D01* +X153032192Y-136457184D01* +X153118352Y-136342090D01* +X153118353Y-136342088D01* +X153168596Y-136207381D01* +X153168598Y-136207370D01* +X153175000Y-136147824D01* +X153175000Y-135850001D01* +X153174999Y-135850000D01* +X152300001Y-135850000D01* +X152300000Y-135850001D01* +X151800000Y-135850001D01* +X151799999Y-135850000D01* +X150925001Y-135850000D01* +X150925000Y-135850001D01* +X150925000Y-136147824D01* +X150924999Y-136147824D01* +X145068935Y-136147824D01* +X145075500Y-136114820D01* +X145075500Y-135085180D01* +X145072249Y-135068835D01* +X145072249Y-135068833D01* +X145068935Y-135052175D01* +X150925000Y-135052175D01* +X150925000Y-135349999D01* +X150925001Y-135350000D01* +X151799999Y-135350000D01* +X151800000Y-135349999D01* +X151800000Y-134600001D01* +X152300000Y-134600001D01* +X152300000Y-135349999D01* +X152300001Y-135350000D01* +X153174999Y-135350000D01* +X153175000Y-135349999D01* +X153175000Y-135052175D01* +X153168598Y-134992629D01* +X153168596Y-134992618D01* +X153118353Y-134857911D01* +X153118352Y-134857909D01* +X153032192Y-134742815D01* +X153032184Y-134742807D01* +X152917090Y-134656647D01* +X152917088Y-134656646D01* +X152782381Y-134606403D01* +X152782370Y-134606401D01* +X152722824Y-134600000D01* +X152300001Y-134600000D01* +X152300000Y-134600001D01* +X151800000Y-134600001D01* +X151799999Y-134600000D01* +X151377176Y-134600000D01* +X151317629Y-134606401D01* +X151317618Y-134606403D01* +X151182911Y-134656646D01* +X151182909Y-134656647D01* +X151067815Y-134742807D01* +X151067807Y-134742815D01* +X150981647Y-134857909D01* +X150981646Y-134857911D01* +X150931403Y-134992618D01* +X150931401Y-134992629D01* +X150925000Y-135052175D01* +X145068935Y-135052175D01* +X145066767Y-135041279D01* +X145066765Y-135041275D01* +X145057143Y-135026875D01* +X145033504Y-134991496D01* +X145032840Y-134991052D01* +X144983724Y-134958234D01* +X144983720Y-134958232D01* +X144939827Y-134949500D01* +X144939820Y-134949500D01* +X143660180Y-134949500D01* +X143660172Y-134949500D01* +X143616279Y-134958232D01* +X143616275Y-134958234D01* +X143566498Y-134991494D01* +X143566494Y-134991498D01* +X143533234Y-135041275D01* +X143533232Y-135041279D01* +X143524500Y-135085172D01* +X143524500Y-135250500D01* +X143505593Y-135308691D01* +X143456093Y-135344655D01* +X143425500Y-135349500D01* +X142327609Y-135349500D01* +X142269418Y-135330593D01* +X142257611Y-135320509D01* +X142176613Y-135239511D01* +X142176610Y-135239509D01* +X142176608Y-135239507D01* +X142073889Y-135180202D01* +X142073890Y-135180202D01* +X142060351Y-135176574D01* +X141959309Y-135149500D01* +X141840691Y-135149500D01* +X141774149Y-135167330D01* +X141726109Y-135180202D01* +X141623391Y-135239507D01* +X141539507Y-135323391D01* +X141480202Y-135426109D01* +X141475304Y-135444388D01* +X141449500Y-135540691D01* +X87029472Y-135540691D01* +X87042150Y-135444388D01* +X87042150Y-135201812D01* +X87010488Y-134961311D01* +X86947704Y-134727000D01* +X86854874Y-134502888D01* +X86733586Y-134292811D01* +X86585915Y-134100362D01* +X86414388Y-133928835D01* +X86414383Y-133928831D01* +X86414381Y-133928829D01* +X86221942Y-133781166D01* +X86193490Y-133764739D01* +X86011862Y-133659876D01* +X86011858Y-133659874D01* +X86011854Y-133659872D01* +X85787755Y-133567048D01* +X85787754Y-133567047D01* +X85787750Y-133567046D01* +X85553439Y-133504262D01* +X85553436Y-133504261D01* +X85553434Y-133504261D01* +X85312939Y-133472600D01* +X85312938Y-133472600D01* +X85070362Y-133472600D01* +X85070360Y-133472600D01* +X84829868Y-133504261D01* +X84829863Y-133504261D01* +X84595557Y-133567044D01* +X84595544Y-133567048D01* +X84371445Y-133659872D01* +X84161357Y-133781166D01* +X83968918Y-133928829D01* +X83797379Y-134100368D01* +X83649716Y-134292807D01* +X83528422Y-134502895D01* +X83435598Y-134726994D01* +X83435594Y-134727007D01* +X83372811Y-134961313D01* +X83372811Y-134961318D01* +X83341150Y-135201810D01* +X80857322Y-135201810D01* +X80855391Y-133291430D01* +X158875000Y-133291430D01* +X158875000Y-133534999D01* +X158875001Y-133535000D01* +X159525000Y-133535000D01* +X159525000Y-134035000D01* +X158875001Y-134035000D01* +X158875000Y-134035001D01* +X158875000Y-134278569D01* +X158911508Y-134462104D01* +X158911508Y-134462106D01* +X158983118Y-134634989D01* +X158983124Y-134635001D01* +X159087087Y-134790589D01* +X159087090Y-134790593D01* +X159219406Y-134922909D01* +X159219410Y-134922912D01* +X159374998Y-135026875D01* +X159375010Y-135026881D01* +X159547888Y-135098489D01* +X159547899Y-135098492D01* +X159575000Y-135103882D01* +X159575000Y-134351988D01* +X159584940Y-134369205D01* +X159640795Y-134425060D01* +X159709204Y-134464556D01* +X159785504Y-134485000D01* +X159864496Y-134485000D01* +X159940796Y-134464556D01* +X160009205Y-134425060D01* +X160065060Y-134369205D01* +X160075000Y-134351988D01* +X160075000Y-135103881D01* +X160102100Y-135098492D01* +X160102111Y-135098489D01* +X160274989Y-135026881D01* +X160275001Y-135026875D01* +X160430589Y-134922912D01* +X160430593Y-134922909D01* +X160562909Y-134790593D01* +X160562912Y-134790589D01* +X160666875Y-134635001D01* +X160666881Y-134634989D01* +X160738491Y-134462106D01* +X160738491Y-134462104D01* +X160774999Y-134278569D01* +X160775000Y-134278565D01* +X160775000Y-134035001D01* +X160774999Y-134035000D01* +X160125000Y-134035000D01* +X160125000Y-133535000D01* +X160774999Y-133535000D01* +X160775000Y-133534999D01* +X160775000Y-133291434D01* +X160774999Y-133291430D01* +X167525000Y-133291430D01* +X167525000Y-133534999D01* +X167525001Y-133535000D01* +X168175000Y-133535000D01* +X168175000Y-134035000D01* +X167525001Y-134035000D01* +X167525000Y-134035001D01* +X167525000Y-134278569D01* +X167561508Y-134462104D01* +X167561508Y-134462106D01* +X167633118Y-134634989D01* +X167633124Y-134635001D01* +X167737087Y-134790589D01* +X167737090Y-134790593D01* +X167869406Y-134922909D01* +X167869410Y-134922912D01* +X168024998Y-135026875D01* +X168025010Y-135026881D01* +X168197888Y-135098489D01* +X168197899Y-135098492D01* +X168225000Y-135103882D01* +X168225000Y-134351988D01* +X168234940Y-134369205D01* +X168290795Y-134425060D01* +X168359204Y-134464556D01* +X168435504Y-134485000D01* +X168514496Y-134485000D01* +X168590796Y-134464556D01* +X168659205Y-134425060D01* +X168715060Y-134369205D01* +X168725000Y-134351988D01* +X168725000Y-135103881D01* +X168752100Y-135098492D01* +X168752111Y-135098489D01* +X168924989Y-135026881D01* +X168925001Y-135026875D01* +X169080589Y-134922912D01* +X169080593Y-134922909D01* +X169212909Y-134790593D01* +X169212912Y-134790589D01* +X169316875Y-134635001D01* +X169316881Y-134634989D01* +X169388491Y-134462106D01* +X169388491Y-134462104D01* +X169424999Y-134278569D01* +X169425000Y-134278565D01* +X169425000Y-134035001D01* +X169424999Y-134035000D01* +X168775000Y-134035000D01* +X168775000Y-133535000D01* +X169424999Y-133535000D01* +X169425000Y-133534999D01* +X169425000Y-133291434D01* +X169424999Y-133291430D01* +X169388491Y-133107895D01* +X169388491Y-133107893D01* +X169316881Y-132935010D01* +X169316875Y-132934998D01* +X169221788Y-132792693D01* +X169212912Y-132779410D01* +X169212909Y-132779406D01* +X169175081Y-132741578D01* +X171241150Y-132741578D01* +X171241150Y-134904621D01* +X171241151Y-134904623D01* +X171256002Y-134998399D01* +X171256004Y-134998404D01* +X171313600Y-135111442D01* +X171403308Y-135201150D01* +X171516346Y-135258746D01* +X171610131Y-135273600D01* +X173773168Y-135273599D01* +X173773171Y-135273599D01* +X173773172Y-135273598D01* +X173820061Y-135266172D01* +X173866949Y-135258747D01* +X173866949Y-135258746D01* +X173866954Y-135258746D01* +X173979992Y-135201150D01* +X174069700Y-135111442D01* +X174127296Y-134998404D01* +X174142150Y-134904619D01* +X174142149Y-133705121D01* +X175891650Y-133705121D01* +X175891650Y-133941078D01* +X175922448Y-134175008D01* +X175922448Y-134175013D01* +X175983517Y-134402924D01* +X175983521Y-134402937D01* +X176073813Y-134620924D01* +X176073815Y-134620929D01* +X176191792Y-134825269D01* +X176254370Y-134906824D01* +X177090607Y-134070586D01* +X177115628Y-134130990D01* +X177186762Y-134237451D01* +X177277299Y-134327988D01* +X177383760Y-134399122D01* +X177444160Y-134424141D01* +X176607924Y-135260378D01* +X176607923Y-135260378D01* +X176689480Y-135322957D01* +X176893820Y-135440934D01* +X176893825Y-135440936D01* +X177111812Y-135531228D01* +X177111825Y-135531232D01* +X177339738Y-135592301D01* +X177573671Y-135623099D01* +X177573673Y-135623100D01* +X177809627Y-135623100D01* +X177809628Y-135623099D01* +X178043558Y-135592301D01* +X178043563Y-135592301D01* +X178271474Y-135531232D01* +X178271487Y-135531228D01* +X178489474Y-135440936D01* +X178489479Y-135440934D01* +X178693815Y-135322960D01* +X178775374Y-135260378D01* +X177939137Y-134424141D01* +X177999540Y-134399122D01* +X178106001Y-134327988D01* +X178196538Y-134237451D01* +X178267672Y-134130990D01* +X178292691Y-134070587D01* +X179128928Y-134906824D01* +X179191510Y-134825265D01* +X179309484Y-134620929D01* +X179309486Y-134620924D01* +X179399778Y-134402937D01* +X179399782Y-134402924D01* +X179460851Y-134175013D01* +X179460851Y-134175008D01* +X179491649Y-133941078D01* +X179491650Y-133941077D01* +X179491650Y-133708939D01* +X181241150Y-133708939D01* +X181241150Y-133937260D01* +X181276864Y-134162755D01* +X181347419Y-134379899D01* +X181451070Y-134583327D01* +X181451074Y-134583333D01* +X181585266Y-134768031D01* +X181585268Y-134768033D01* +X181585271Y-134768037D01* +X181746713Y-134929479D01* +X181746716Y-134929481D01* +X181746718Y-134929483D01* +X181900591Y-135041279D01* +X181931422Y-135063679D01* +X182134851Y-135167331D01* +X182351990Y-135237884D01* +X182351991Y-135237884D01* +X182351994Y-135237885D01* +X182577490Y-135273600D01* +X182577493Y-135273600D01* +X182805810Y-135273600D01* +X183031305Y-135237885D01* +X183031306Y-135237884D01* +X183031310Y-135237884D01* +X183248449Y-135167331D01* +X183451878Y-135063679D01* +X183636587Y-134929479D01* +X183798029Y-134768037D01* +X183932229Y-134583328D01* +X184035881Y-134379899D01* +X184106434Y-134162760D01* +X184126669Y-134035000D01* +X184142150Y-133937260D01* +X184142150Y-133708939D01* +X186241150Y-133708939D01* +X186241150Y-133937260D01* +X186276864Y-134162755D01* +X186347419Y-134379899D01* +X186451070Y-134583327D01* +X186451074Y-134583333D01* +X186585266Y-134768031D01* +X186585268Y-134768033D01* +X186585271Y-134768037D01* +X186746713Y-134929479D01* +X186746716Y-134929481D01* +X186746718Y-134929483D01* +X186900591Y-135041279D01* +X186931422Y-135063679D01* +X187134851Y-135167331D01* +X187351990Y-135237884D01* +X187351991Y-135237884D01* +X187351994Y-135237885D01* +X187577490Y-135273600D01* +X187577493Y-135273600D01* +X187805810Y-135273600D01* +X188031305Y-135237885D01* +X188031306Y-135237884D01* +X188031310Y-135237884D01* +X188248449Y-135167331D01* +X188451878Y-135063679D01* +X188636587Y-134929479D01* +X188798029Y-134768037D01* +X188932229Y-134583328D01* +X189035881Y-134379899D01* +X189106434Y-134162760D01* +X189126669Y-134035000D01* +X189142150Y-133937260D01* +X189142150Y-133708939D01* +X191241150Y-133708939D01* +X191241150Y-133937260D01* +X191276864Y-134162755D01* +X191347419Y-134379899D01* +X191451070Y-134583327D01* +X191451074Y-134583333D01* +X191585266Y-134768031D01* +X191585268Y-134768033D01* +X191585271Y-134768037D01* +X191746713Y-134929479D01* +X191746716Y-134929481D01* +X191746718Y-134929483D01* +X191900591Y-135041279D01* +X191931422Y-135063679D01* +X192134851Y-135167331D01* +X192351990Y-135237884D01* +X192351991Y-135237884D01* +X192351994Y-135237885D01* +X192577490Y-135273600D01* +X192577493Y-135273600D01* +X192805810Y-135273600D01* +X193031305Y-135237885D01* +X193031306Y-135237884D01* +X193031310Y-135237884D01* +X193142334Y-135201810D01* +X209341150Y-135201810D01* +X209341150Y-135444389D01* +X209372811Y-135684881D01* +X209372811Y-135684886D01* +X209372812Y-135684889D01* +X209435517Y-135918907D01* +X209435594Y-135919192D01* +X209435598Y-135919205D01* +X209528422Y-136143304D01* +X209528424Y-136143308D01* +X209528426Y-136143312D01* +X209643191Y-136342090D01* +X209649716Y-136353392D01* +X209797379Y-136545831D01* +X209797381Y-136545833D01* +X209797385Y-136545838D01* +X209968912Y-136717365D01* +X209968916Y-136717368D01* +X209968918Y-136717370D01* +X210161357Y-136865033D01* +X210161361Y-136865036D01* +X210371438Y-136986324D01* +X210595550Y-137079154D01* +X210829861Y-137141938D01* +X211070362Y-137173600D01* +X211070363Y-137173600D01* +X211312937Y-137173600D01* +X211312938Y-137173600D01* +X211553439Y-137141938D01* +X211787750Y-137079154D01* +X212011862Y-136986324D01* +X212221939Y-136865036D01* +X212414388Y-136717365D01* +X212585915Y-136545838D01* +X212733586Y-136353389D01* +X212854874Y-136143312D01* +X212947704Y-135919200D01* +X213010488Y-135684889D01* +X213042150Y-135444388D01* +X213042150Y-135201812D01* +X213010488Y-134961311D01* +X212947704Y-134727000D01* +X212854874Y-134502888D01* +X212733586Y-134292811D01* +X212585915Y-134100362D01* +X212414388Y-133928835D01* +X212414383Y-133928831D01* +X212414381Y-133928829D01* +X212221942Y-133781166D01* +X212193490Y-133764739D01* +X212011862Y-133659876D01* +X212011858Y-133659874D01* +X212011854Y-133659872D01* +X211787755Y-133567048D01* +X211787754Y-133567047D01* +X211787750Y-133567046D01* +X211553439Y-133504262D01* +X211553436Y-133504261D01* +X211553434Y-133504261D01* +X211312939Y-133472600D01* +X211312938Y-133472600D01* +X211070362Y-133472600D01* +X211070360Y-133472600D01* +X210829868Y-133504261D01* +X210829863Y-133504261D01* +X210595557Y-133567044D01* +X210595544Y-133567048D01* +X210371445Y-133659872D01* +X210161357Y-133781166D01* +X209968918Y-133928829D01* +X209797379Y-134100368D01* +X209649716Y-134292807D01* +X209528422Y-134502895D01* +X209435598Y-134726994D01* +X209435594Y-134727007D01* +X209372811Y-134961313D01* +X209372811Y-134961318D01* +X209341150Y-135201810D01* +X193142334Y-135201810D01* +X193248449Y-135167331D01* +X193451878Y-135063679D01* +X193636587Y-134929479D01* +X193798029Y-134768037D01* +X193932229Y-134583328D01* +X194035881Y-134379899D01* +X194106434Y-134162760D01* +X194126669Y-134035000D01* +X194142150Y-133937260D01* +X194142150Y-133708939D01* +X194106435Y-133483444D01* +X194082165Y-133408749D01* +X194035881Y-133266301D01* +X194018684Y-133232550D01* +X198041150Y-133232550D01* +X198041150Y-133413649D01* +X198069478Y-133592506D01* +X198123600Y-133759081D01* +X198125439Y-133764739D01* +X198207654Y-133926094D01* +X198314097Y-134072601D01* +X198442149Y-134200653D01* +X198588656Y-134307096D01* +X198750011Y-134389311D01* +X198922241Y-134445271D01* +X198993786Y-134456602D01* +X199101101Y-134473600D01* +X199101104Y-134473600D01* +X199282199Y-134473600D01* +X199371627Y-134459435D01* +X199461059Y-134445271D01* +X199633289Y-134389311D01* +X199794644Y-134307096D01* +X199941151Y-134200653D01* +X200069203Y-134072601D01* +X200175646Y-133926094D01* +X200257861Y-133764739D01* +X200313821Y-133592509D01* +X200342150Y-133413646D01* +X200342150Y-133232554D01* +X200342150Y-133232550D01* +X204541150Y-133232550D01* +X204541150Y-133413649D01* +X204569478Y-133592506D01* +X204623600Y-133759081D01* +X204625439Y-133764739D01* +X204707654Y-133926094D01* +X204814097Y-134072601D01* +X204942149Y-134200653D01* +X205088656Y-134307096D01* +X205250011Y-134389311D01* +X205422241Y-134445271D01* +X205493786Y-134456602D01* +X205601101Y-134473600D01* +X205601104Y-134473600D01* +X205782199Y-134473600D01* +X205871627Y-134459435D01* +X205961059Y-134445271D01* +X206133289Y-134389311D01* +X206294644Y-134307096D01* +X206441151Y-134200653D01* +X206569203Y-134072601D01* +X206675646Y-133926094D01* +X206757861Y-133764739D01* +X206813821Y-133592509D01* +X206842150Y-133413646D01* +X206842150Y-133232554D01* +X206842150Y-133232550D01* +X206813821Y-133053693D01* +X206813821Y-133053691D01* +X206757861Y-132881461D01* +X206675646Y-132720106D01* +X206569203Y-132573599D01* +X206441151Y-132445547D01* +X206294644Y-132339104D01* +X206294643Y-132339103D01* +X206294641Y-132339102D01* +X206133287Y-132256888D01* +X205961056Y-132200928D01* +X205782199Y-132172600D01* +X205782196Y-132172600D01* +X205601104Y-132172600D01* +X205601101Y-132172600D01* +X205422243Y-132200928D01* +X205250012Y-132256888D01* +X205088658Y-132339102D01* +X205042552Y-132372600D01* +X204942149Y-132445547D01* +X204814097Y-132573599D01* +X204807616Y-132582520D01* +X204707652Y-132720108D01* +X204625438Y-132881462D01* +X204569478Y-133053693D01* +X204541150Y-133232550D01* +X200342150Y-133232550D01* +X200313821Y-133053693D01* +X200313821Y-133053691D01* +X200257861Y-132881461D01* +X200175646Y-132720106D01* +X200069203Y-132573599D01* +X199941151Y-132445547D01* +X199794644Y-132339104D01* +X199794643Y-132339103D01* +X199794641Y-132339102D01* +X199633287Y-132256888D01* +X199461056Y-132200928D01* +X199282199Y-132172600D01* +X199282196Y-132172600D01* +X199101104Y-132172600D01* +X199101101Y-132172600D01* +X198922243Y-132200928D01* +X198750012Y-132256888D01* +X198588658Y-132339102D01* +X198542552Y-132372600D01* +X198442149Y-132445547D01* +X198314097Y-132573599D01* +X198307616Y-132582520D01* +X198207652Y-132720108D01* +X198125438Y-132881462D01* +X198069478Y-133053693D01* +X198041150Y-133232550D01* +X194018684Y-133232550D01* +X193932229Y-133062872D01* +X193904913Y-133025275D01* +X193798033Y-132878168D01* +X193798031Y-132878166D01* +X193798029Y-132878163D01* +X193636587Y-132716721D01* +X193636583Y-132716718D01* +X193636581Y-132716716D01* +X193451883Y-132582524D01* +X193451877Y-132582520D01* +X193248449Y-132478869D01* +X193031305Y-132408314D01* +X192805810Y-132372600D01* +X192805807Y-132372600D01* +X192577493Y-132372600D01* +X192577490Y-132372600D01* +X192351994Y-132408314D01* +X192134850Y-132478869D01* +X191931422Y-132582520D01* +X191931416Y-132582524D01* +X191746718Y-132716716D01* +X191585266Y-132878168D01* +X191451074Y-133062866D01* +X191451070Y-133062872D01* +X191347419Y-133266300D01* +X191276864Y-133483444D01* +X191241150Y-133708939D01* +X189142150Y-133708939D01* +X189106435Y-133483444D01* +X189082165Y-133408749D01* +X189035881Y-133266301D01* +X188932229Y-133062872D01* +X188904913Y-133025275D01* +X188798033Y-132878168D01* +X188798031Y-132878166D01* +X188798029Y-132878163D01* +X188636587Y-132716721D01* +X188636583Y-132716718D01* +X188636581Y-132716716D01* +X188451883Y-132582524D01* +X188451877Y-132582520D01* +X188248449Y-132478869D01* +X188031305Y-132408314D01* +X187805810Y-132372600D01* +X187805807Y-132372600D01* +X187577493Y-132372600D01* +X187577490Y-132372600D01* +X187351994Y-132408314D01* +X187134850Y-132478869D01* +X186931422Y-132582520D01* +X186931416Y-132582524D01* +X186746718Y-132716716D01* +X186585266Y-132878168D01* +X186451074Y-133062866D01* +X186451070Y-133062872D01* +X186347419Y-133266300D01* +X186276864Y-133483444D01* +X186241150Y-133708939D01* +X184142150Y-133708939D01* +X184106435Y-133483444D01* +X184082165Y-133408749D01* +X184035881Y-133266301D01* +X183932229Y-133062872D01* +X183904913Y-133025275D01* +X183798033Y-132878168D01* +X183798031Y-132878166D01* +X183798029Y-132878163D01* +X183636587Y-132716721D01* +X183636583Y-132716718D01* +X183636581Y-132716716D01* +X183451883Y-132582524D01* +X183451877Y-132582520D01* +X183248449Y-132478869D01* +X183031305Y-132408314D01* +X182805810Y-132372600D01* +X182805807Y-132372600D01* +X182577493Y-132372600D01* +X182577490Y-132372600D01* +X182351994Y-132408314D01* +X182134850Y-132478869D01* +X181931422Y-132582520D01* +X181931416Y-132582524D01* +X181746718Y-132716716D01* +X181585266Y-132878168D01* +X181451074Y-133062866D01* +X181451070Y-133062872D01* +X181347419Y-133266300D01* +X181276864Y-133483444D01* +X181241150Y-133708939D01* +X179491650Y-133708939D01* +X179491650Y-133705123D01* +X179491649Y-133705121D01* +X179460851Y-133471191D01* +X179460851Y-133471186D01* +X179399782Y-133243275D01* +X179399778Y-133243262D01* +X179309486Y-133025275D01* +X179309484Y-133025270D01* +X179191507Y-132820930D01* +X179128928Y-132739374D01* +X178292691Y-133575610D01* +X178267672Y-133515210D01* +X178196538Y-133408749D01* +X178106001Y-133318212D01* +X177999540Y-133247078D01* +X177939136Y-133222057D01* +X178775374Y-132385820D01* +X178775375Y-132385820D01* +X178693819Y-132323242D01* +X178489479Y-132205265D01* +X178489474Y-132205263D01* +X178271487Y-132114971D01* +X178271474Y-132114967D01* +X178043561Y-132053898D01* +X177809628Y-132023100D01* +X177573671Y-132023100D01* +X177339741Y-132053898D01* +X177339736Y-132053898D01* +X177111825Y-132114967D01* +X177111812Y-132114971D01* +X176893825Y-132205263D01* +X176893820Y-132205265D01* +X176689481Y-132323241D01* +X176607924Y-132385820D01* +X177444162Y-133222058D01* +X177383760Y-133247078D01* +X177277299Y-133318212D01* +X177186762Y-133408749D01* +X177115628Y-133515210D01* +X177090608Y-133575612D01* +X176254370Y-132739374D01* +X176191791Y-132820931D01* +X176073815Y-133025270D01* +X176073813Y-133025275D01* +X175983521Y-133243262D01* +X175983517Y-133243275D01* +X175922448Y-133471186D01* +X175922448Y-133471191D01* +X175891650Y-133705121D01* +X174142149Y-133705121D01* +X174142149Y-132741582D01* +X174142149Y-132741581D01* +X174142149Y-132741578D01* +X174142148Y-132741576D01* +X174127297Y-132647800D01* +X174127296Y-132647798D01* +X174127296Y-132647796D01* +X174069700Y-132534758D01* +X173979992Y-132445050D01* +X173866954Y-132387454D01* +X173866955Y-132387454D01* +X173773171Y-132372600D01* +X171610128Y-132372600D01* +X171610126Y-132372601D01* +X171516350Y-132387452D01* +X171516345Y-132387454D01* +X171403309Y-132445049D01* +X171313599Y-132534759D01* +X171256004Y-132647795D01* +X171241150Y-132741578D01* +X169175081Y-132741578D01* +X169080593Y-132647090D01* +X169080589Y-132647087D01* +X168925001Y-132543124D01* +X168924992Y-132543120D01* +X168752105Y-132471508D01* +X168725000Y-132466116D01* +X168725000Y-133218011D01* +X168715060Y-133200795D01* +X168659205Y-133144940D01* +X168590796Y-133105444D01* +X168514496Y-133085000D01* +X168435504Y-133085000D01* +X168359204Y-133105444D01* +X168290795Y-133144940D01* +X168234940Y-133200795D01* +X168225000Y-133218011D01* +X168225000Y-132466116D01* +X168197894Y-132471508D01* +X168025007Y-132543120D01* +X168024998Y-132543124D01* +X167869410Y-132647087D01* +X167869406Y-132647090D01* +X167737090Y-132779406D01* +X167737087Y-132779410D01* +X167633124Y-132934998D01* +X167633118Y-132935010D01* +X167561508Y-133107893D01* +X167561508Y-133107895D01* +X167525000Y-133291430D01* +X160774999Y-133291430D01* +X160738491Y-133107895D01* +X160738491Y-133107893D01* +X160666881Y-132935010D01* +X160666875Y-132934998D01* +X160562912Y-132779410D01* +X160562909Y-132779406D01* +X160430593Y-132647090D01* +X160430589Y-132647087D01* +X160275001Y-132543124D01* +X160274992Y-132543120D01* +X160102105Y-132471508D01* +X160075000Y-132466116D01* +X160075000Y-133218011D01* +X160065060Y-133200795D01* +X160009205Y-133144940D01* +X159940796Y-133105444D01* +X159864496Y-133085000D01* +X159785504Y-133085000D01* +X159709204Y-133105444D01* +X159640795Y-133144940D01* +X159584940Y-133200795D01* +X159575000Y-133218011D01* +X159575000Y-132466116D01* +X159547894Y-132471508D01* +X159375007Y-132543120D01* +X159374998Y-132543124D01* +X159219410Y-132647087D01* +X159219406Y-132647090D01* +X159087090Y-132779406D01* +X159087087Y-132779410D01* +X158983124Y-132934998D01* +X158983118Y-132935010D01* +X158911508Y-133107893D01* +X158911508Y-133107895D01* +X158875000Y-133291430D01* +X80855391Y-133291430D01* +X80850819Y-128768272D01* +X114301150Y-128768272D01* +X114301150Y-130397927D01* +X114309882Y-130441820D01* +X114309884Y-130441824D01* +X114327167Y-130467690D01* +X114343146Y-130491604D01* +X114392928Y-130524867D01* +X114403977Y-130527064D01* +X114436822Y-130533599D01* +X114436828Y-130533599D01* +X114436830Y-130533600D01* +X114436831Y-130533600D01* +X116066469Y-130533600D01* +X116066470Y-130533600D01* +X116066471Y-130533599D01* +X116066477Y-130533599D01* +X116088273Y-130529262D01* +X116110372Y-130524867D01* +X116160154Y-130491604D01* +X116193417Y-130441822D01* +X116202150Y-130397920D01* +X116202150Y-128768280D01* +X116202149Y-128768278D01* +X116202149Y-128768272D01* +X116193417Y-128724379D01* +X116193415Y-128724375D01* +X116160155Y-128674598D01* +X116160154Y-128674596D01* +X116144004Y-128663805D01* +X116110374Y-128641334D01* +X116110370Y-128641332D01* +X116066477Y-128632600D01* +X116066470Y-128632600D01* +X114436830Y-128632600D01* +X114436822Y-128632600D01* +X114392929Y-128641332D01* +X114392925Y-128641334D01* +X114343148Y-128674594D01* +X114343144Y-128674598D01* +X114309884Y-128724375D01* +X114309882Y-128724379D01* +X114301150Y-128768272D01* +X80850819Y-128768272D01* +X80828838Y-107023100D01* +X90581854Y-107023100D01* +X90582049Y-107025586D01* +X90582051Y-107025593D01* +X90627869Y-107183300D01* +X90627869Y-107183301D01* +X90711464Y-107324652D01* +X90827597Y-107440785D01* +X90968949Y-107524380D01* +X91126660Y-107570200D01* +X91163513Y-107573100D01* +X91566649Y-107573100D01* +X91566650Y-107573099D01* +X91566650Y-107023101D01* +X91566649Y-107023100D01* +X90581854Y-107023100D01* +X80828838Y-107023100D01* +X80828333Y-106523100D01* +X90581854Y-106523100D01* +X91566649Y-106523100D01* +X91566650Y-106523099D01* +X91566650Y-105973101D01* +X91566649Y-105973100D01* +X91163513Y-105973100D01* +X91126660Y-105975999D01* +X90968949Y-106021819D01* +X90968948Y-106021819D01* +X90827597Y-106105414D01* +X90711464Y-106221547D01* +X90627869Y-106362898D01* +X90627869Y-106362899D01* +X90582051Y-106520606D01* +X90582049Y-106520613D01* +X90581854Y-106523100D01* +X80828333Y-106523100D01* +X80804467Y-82912464D01* +X92941150Y-82912464D01* +X92941150Y-83733736D01* +X92945674Y-83764789D01* +X92951784Y-83806726D01* +X92987323Y-83879421D01* +X93006824Y-83919311D01* +X93095439Y-84007926D01* +X93208025Y-84062966D01* +X93281014Y-84073600D01* +X93425882Y-84073600D01* +X93484073Y-84092507D01* +X93495885Y-84102596D01* +X93586489Y-84193200D01* +X93669653Y-84276363D01* +X93697431Y-84330880D01* +X93698650Y-84346367D01* +X93698650Y-84460909D01* +X93717884Y-84532690D01* +X93729352Y-84575490D01* +X93788657Y-84678208D01* +X93788659Y-84678210D01* +X93788661Y-84678213D01* +X93872537Y-84762089D01* +X93872539Y-84762090D01* +X93872541Y-84762092D01* +X93975260Y-84821397D01* +X93975261Y-84821397D01* +X93975264Y-84821399D01* +X94089841Y-84852100D01* +X94089843Y-84852100D01* +X94208457Y-84852100D01* +X94208459Y-84852100D01* +X94323036Y-84821399D01* +X94323038Y-84821397D01* +X94323040Y-84821397D01* +X94425758Y-84762092D01* +X94425758Y-84762091D01* +X94425763Y-84762089D01* +X94509639Y-84678213D01* +X94532659Y-84638342D01* +X94568947Y-84575490D01* +X94568947Y-84575488D01* +X94568949Y-84575486D01* +X94599650Y-84460909D01* +X94599650Y-84342291D01* +X94568949Y-84227714D01* +X94568947Y-84227711D01* +X94568947Y-84227709D01* +X94509642Y-84124991D01* +X94509640Y-84124989D01* +X94509639Y-84124987D01* +X94425763Y-84041111D01* +X94425760Y-84041109D01* +X94425758Y-84041107D01* +X94323039Y-83981802D01* +X94323040Y-83981802D01* +X94208453Y-83951098D01* +X94206321Y-83950818D01* +X94204932Y-83950155D01* +X94202191Y-83949421D01* +X94202327Y-83948912D01* +X94151098Y-83924471D01* +X94121909Y-83870697D01* +X94129364Y-83814112D01* +X94129245Y-83814075D01* +X94129462Y-83813370D01* +X94129902Y-83810036D01* +X94130257Y-83809299D01* +X94131516Y-83806725D01* +X94142150Y-83733736D01* +X94142150Y-82912464D01* +X94131516Y-82839475D01* +X94076476Y-82726889D01* +X93987861Y-82638274D01* +X93969328Y-82629214D01* +X93875275Y-82583234D01* +X93875276Y-82583234D01* +X93857027Y-82580575D01* +X93802286Y-82572600D01* +X93281014Y-82572600D01* +X93237220Y-82578980D01* +X93208023Y-82583234D01* +X93095440Y-82638273D01* +X93006823Y-82726890D01* +X92951784Y-82839473D01* +X92951784Y-82839475D01* +X92941150Y-82912464D01* +X80804467Y-82912464D01* +X80796038Y-74573101D01* +X99641651Y-74573101D01* +X99641651Y-74654682D01* +X99648058Y-74725203D01* +X99648060Y-74725209D01* +X99698629Y-74887492D01* +X99698632Y-74887500D01* +X99786574Y-75032972D01* +X99906777Y-75153175D01* +X100052249Y-75241117D01* +X100052257Y-75241120D01* +X100214539Y-75291689D01* +X100214545Y-75291691D01* +X100285075Y-75298098D01* +X100291650Y-75298098D01* +X100291650Y-74573101D01* +X100291649Y-74573100D01* +X99641652Y-74573100D01* +X99641651Y-74573101D01* +X80796038Y-74573101D01* +X80795513Y-74053991D01* +X97632150Y-74053991D01* +X97632150Y-74172609D01* +X97655856Y-74261081D01* +X97662852Y-74287190D01* +X97722157Y-74389908D01* +X97722159Y-74389910D01* +X97722161Y-74389913D01* +X97806037Y-74473789D01* +X97806039Y-74473790D01* +X97806041Y-74473792D01* +X97908760Y-74533097D01* +X97908761Y-74533097D01* +X97908764Y-74533099D01* +X98023341Y-74563800D01* +X98023343Y-74563800D01* +X98141957Y-74563800D01* +X98141959Y-74563800D01* +X98256536Y-74533099D01* +X98256538Y-74533097D01* +X98256540Y-74533097D01* +X98359258Y-74473792D01* +X98359258Y-74473791D01* +X98359263Y-74473789D01* +X98443139Y-74389913D01* +X98486818Y-74314260D01* +X98502447Y-74287190D01* +X98502447Y-74287188D01* +X98502449Y-74287186D01* +X98533150Y-74172609D01* +X98533150Y-74053991D01* +X98516410Y-73991518D01* +X99641650Y-73991518D01* +X99641650Y-74073099D01* +X99641651Y-74073100D01* +X100291649Y-74073100D01* +X100291650Y-74073099D01* +X100291650Y-73348101D01* +X100291648Y-73348099D01* +X100285075Y-73348100D01* +X100214546Y-73354508D01* +X100214540Y-73354510D01* +X100052257Y-73405079D01* +X100052249Y-73405082D01* +X99906777Y-73493024D01* +X99786574Y-73613227D01* +X99698632Y-73758699D01* +X99698629Y-73758707D01* +X99648060Y-73920989D01* +X99648058Y-73920995D01* +X99641650Y-73991518D01* +X98516410Y-73991518D01* +X98502449Y-73939414D01* +X98502447Y-73939411D01* +X98502447Y-73939409D01* +X98443142Y-73836691D01* +X98443140Y-73836689D01* +X98443139Y-73836687D01* +X98359263Y-73752811D01* +X98359260Y-73752809D01* +X98359258Y-73752807D01* +X98256539Y-73693502D01* +X98256540Y-73693502D01* +X98243001Y-73689874D01* +X98141959Y-73662800D01* +X98023341Y-73662800D01* +X97953217Y-73681589D01* +X97908759Y-73693502D01* +X97806041Y-73752807D01* +X97722157Y-73836691D01* +X97662852Y-73939409D01* +X97660897Y-73946707D01* +X97632150Y-74053991D01* +X80795513Y-74053991D01* +X80779716Y-58426531D01* +X82613650Y-58426531D01* +X82613650Y-62042269D01* +X82633776Y-62143444D01* +X82638649Y-62167944D01* +X82638650Y-62167947D01* +X82638651Y-62167950D01* +X82687683Y-62286324D01* +X82758207Y-62391873D01* +X82758873Y-62392869D01* +X84596681Y-64230677D01* +X84660333Y-64273207D01* +X84703223Y-64301865D01* +X84821606Y-64350901D01* +X84947281Y-64375900D01* +X86242150Y-64375900D01* +X86300341Y-64394807D01* +X86336305Y-64444307D01* +X86341150Y-64474900D01* +X86341150Y-70773600D01* +X86322243Y-70831791D01* +X86272743Y-70867755D01* +X86242150Y-70872600D01* +X85460128Y-70872600D01* +X85460126Y-70872601D01* +X85366350Y-70887452D01* +X85366345Y-70887454D01* +X85253309Y-70945049D01* +X85163599Y-71034759D01* +X85106004Y-71147795D01* +X85091150Y-71241578D01* +X85091150Y-72404621D01* +X85091151Y-72404623D01* +X85106002Y-72498399D01* +X85106004Y-72498404D01* +X85163600Y-72611442D01* +X85253308Y-72701150D01* +X85366346Y-72758746D01* +X85460131Y-72773600D01* +X88523168Y-72773599D01* +X88523171Y-72773599D01* +X88523172Y-72773598D01* +X88570061Y-72766172D01* +X88616949Y-72758747D01* +X88616949Y-72758746D01* +X88616954Y-72758746D01* +X88729992Y-72701150D01* +X88819700Y-72611442D01* +X88877296Y-72498404D01* +X88889225Y-72423086D01* +X88892150Y-72404621D01* +X88892150Y-72073101D01* +X90141651Y-72073101D01* +X90141651Y-72423086D01* +X90152142Y-72525787D01* +X90152145Y-72525799D01* +X90207293Y-72692224D01* +X90299330Y-72841440D01* +X90423309Y-72965419D01* +X90572525Y-73057456D01* +X90738956Y-73112606D01* +X90841662Y-73123099D01* +X92141648Y-73123099D01* +X92141650Y-73123098D01* +X92141650Y-72073101D01* +X92641650Y-72073101D01* +X92641650Y-73123098D01* +X92641651Y-73123099D01* +X93941636Y-73123099D01* +X94044337Y-73112607D01* +X94044349Y-73112604D01* +X94210774Y-73057456D01* +X94359990Y-72965419D01* +X94483969Y-72841440D01* +X94576006Y-72692224D01* +X94631156Y-72525793D01* +X94641650Y-72423087D01* +X94641650Y-72107291D01* +X96030550Y-72107291D01* +X96030550Y-72225909D01* +X96031592Y-72229796D01* +X96061252Y-72340490D01* +X96120557Y-72443208D01* +X96120559Y-72443210D01* +X96120561Y-72443213D01* +X96204437Y-72527089D01* +X96204439Y-72527090D01* +X96204441Y-72527092D01* +X96307160Y-72586397D01* +X96307161Y-72586397D01* +X96307164Y-72586399D01* +X96421741Y-72617100D01* +X96421743Y-72617100D01* +X96540357Y-72617100D01* +X96540359Y-72617100D01* +X96654936Y-72586399D01* +X96654938Y-72586397D01* +X96654940Y-72586397D01* +X96757658Y-72527092D01* +X96757658Y-72527091D01* +X96757663Y-72527089D01* +X96841539Y-72443213D01* +X96853159Y-72423087D01* +X96900847Y-72340490D01* +X96900847Y-72340488D01* +X96900849Y-72340486D01* +X96931550Y-72225909D01* +X96931550Y-72107291D01* +X96900849Y-71992714D01* +X96900847Y-71992711D01* +X96900847Y-71992709D01* +X96841542Y-71889991D01* +X96841540Y-71889989D01* +X96841539Y-71889987D01* +X96757663Y-71806111D01* +X96757660Y-71806109D01* +X96757658Y-71806107D01* +X96654939Y-71746802D01* +X96654940Y-71746802D01* +X96633514Y-71741061D01* +X96540359Y-71716100D01* +X96421741Y-71716100D01* +X96351617Y-71734889D01* +X96307159Y-71746802D01* +X96204441Y-71806107D01* +X96120557Y-71889991D01* +X96061252Y-71992709D01* +X96061251Y-71992714D01* +X96030550Y-72107291D01* +X94641650Y-72107291D01* +X94641650Y-72073101D01* +X94641649Y-72073100D01* +X92641651Y-72073100D01* +X92641650Y-72073101D01* +X92141650Y-72073101D01* +X92141649Y-72073100D01* +X90141652Y-72073100D01* +X90141651Y-72073101D01* +X88892150Y-72073101D01* +X88892150Y-72032093D01* +X88892149Y-71241582D01* +X88891279Y-71236090D01* +X88891279Y-71236086D01* +X88889224Y-71223112D01* +X90141650Y-71223112D01* +X90141650Y-71573099D01* +X90141651Y-71573100D01* +X92141649Y-71573100D01* +X92141650Y-71573099D01* +X92141650Y-70523101D01* +X92641650Y-70523101D01* +X92641650Y-71573099D01* +X92641651Y-71573100D01* +X94641648Y-71573100D01* +X94641649Y-71573099D01* +X94641649Y-71223113D01* +X94631157Y-71120412D01* +X94631154Y-71120400D01* +X94576006Y-70953975D01* +X94524767Y-70870902D01* +X94510311Y-70811449D01* +X94533561Y-70754853D01* +X94539013Y-70748938D01* +X94598739Y-70689213D01* +X94599051Y-70688672D01* +X94658047Y-70586490D01* +X94658047Y-70586488D01* +X94658049Y-70586486D01* +X94688750Y-70471909D01* +X94688750Y-70353291D01* +X94658049Y-70238714D01* +X94658047Y-70238711D01* +X94658047Y-70238709D01* +X94598742Y-70135991D01* +X94598740Y-70135989D01* +X94598739Y-70135987D01* +X94514863Y-70052111D01* +X94514860Y-70052109D01* +X94514858Y-70052107D01* +X94412139Y-69992802D01* +X94412140Y-69992802D01* +X94382119Y-69984758D01* +X94297559Y-69962100D01* +X94178941Y-69962100D01* +X94108817Y-69980889D01* +X94064359Y-69992802D01* +X93961641Y-70052107D01* +X93877757Y-70135991D01* +X93818452Y-70238709D01* +X93787750Y-70353292D01* +X93787750Y-70424100D01* +X93768843Y-70482291D01* +X93719343Y-70518255D01* +X93688750Y-70523100D01* +X92641651Y-70523100D01* +X92641650Y-70523101D01* +X92141650Y-70523101D01* +X92141649Y-70523100D01* +X90841663Y-70523100D01* +X90738962Y-70533592D01* +X90738950Y-70533595D01* +X90572525Y-70588743D01* +X90423309Y-70680780D01* +X90299330Y-70804759D01* +X90207293Y-70953975D01* +X90152143Y-71120406D01* +X90141650Y-71223112D01* +X88889224Y-71223112D01* +X88877297Y-71147800D01* +X88877296Y-71147798D01* +X88877296Y-71147796D01* +X88819700Y-71034758D01* +X88729992Y-70945050D01* +X88616954Y-70887454D01* +X88616955Y-70887454D01* +X88523172Y-70872600D01* +X88523169Y-70872600D01* +X87741150Y-70872600D01* +X87682959Y-70853693D01* +X87646995Y-70804193D01* +X87642150Y-70773600D01* +X87642150Y-69240691D01* +X93399500Y-69240691D01* +X93399500Y-69359309D01* +X93406965Y-69387169D01* +X93430202Y-69473890D01* +X93489507Y-69576608D01* +X93489509Y-69576610D01* +X93489511Y-69576613D01* +X93573387Y-69660489D01* +X93573389Y-69660490D01* +X93573391Y-69660492D01* +X93676110Y-69719797D01* +X93676111Y-69719797D01* +X93676114Y-69719799D01* +X93790691Y-69750500D01* +X93790693Y-69750500D01* +X93909307Y-69750500D01* +X93909309Y-69750500D01* +X94023886Y-69719799D01* +X94023888Y-69719797D01* +X94023890Y-69719797D01* +X94126608Y-69660492D01* +X94126608Y-69660491D01* +X94126613Y-69660489D01* +X94210489Y-69576613D01* +X94212518Y-69573099D01* +X94269797Y-69473890D01* +X94269797Y-69473888D01* +X94269799Y-69473886D01* +X94300500Y-69359309D01* +X94300500Y-69240691D01* +X94269799Y-69126114D01* +X94269797Y-69126111D01* +X94269797Y-69126109D01* +X94210492Y-69023391D01* +X94210490Y-69023389D01* +X94210489Y-69023387D01* +X94126613Y-68939511D01* +X94126610Y-68939509D01* +X94126608Y-68939507D01* +X94023889Y-68880202D01* +X94023890Y-68880202D01* +X93997336Y-68873087D01* +X93909309Y-68849500D01* +X93790691Y-68849500D01* +X93720567Y-68868289D01* +X93676109Y-68880202D01* +X93573391Y-68939507D01* +X93489507Y-69023391D01* +X93430202Y-69126109D01* +X93425884Y-69142224D01* +X93399500Y-69240691D01* +X87642150Y-69240691D01* +X87642150Y-67641591D01* +X91748050Y-67641591D01* +X91748050Y-67760209D01* +X91775124Y-67861251D01* +X91778752Y-67874790D01* +X91838057Y-67977508D01* +X91838059Y-67977510D01* +X91838061Y-67977513D01* +X91921937Y-68061389D01* +X91921939Y-68061390D01* +X91921941Y-68061392D01* +X92024660Y-68120697D01* +X92024661Y-68120697D01* +X92024664Y-68120699D01* +X92139241Y-68151400D01* +X92139243Y-68151400D01* +X92257857Y-68151400D01* +X92257859Y-68151400D01* +X92372436Y-68120699D01* +X92372438Y-68120697D01* +X92372440Y-68120697D01* +X92475158Y-68061392D01* +X92475158Y-68061391D01* +X92475163Y-68061389D01* +X92559039Y-67977513D01* +X92570578Y-67957527D01* +X92618347Y-67874790D01* +X92618347Y-67874788D01* +X92618349Y-67874786D01* +X92649050Y-67760209D01* +X92649050Y-67641591D01* +X92618349Y-67527014D01* +X92618347Y-67527011D01* +X92618347Y-67527009D01* +X92559042Y-67424291D01* +X92559040Y-67424289D01* +X92559039Y-67424287D01* +X92475163Y-67340411D01* +X92475160Y-67340409D01* +X92475158Y-67340407D01* +X92372439Y-67281102D01* +X92372440Y-67281102D01* +X92358901Y-67277474D01* +X92257859Y-67250400D01* +X92139241Y-67250400D01* +X92069117Y-67269189D01* +X92024659Y-67281102D01* +X91921941Y-67340407D01* +X91838057Y-67424291D01* +X91778752Y-67527009D01* +X91772726Y-67549499D01* +X91748050Y-67641591D01* +X87642150Y-67641591D01* +X87642150Y-64474900D01* +X87661057Y-64416709D01* +X87710557Y-64380745D01* +X87741150Y-64375900D01* +X98920918Y-64375900D01* +X98920919Y-64375900D01* +X99046594Y-64350901D01* +X99164977Y-64301865D01* +X99207867Y-64273207D01* +X99271519Y-64230677D01* +X100059146Y-63443048D01* +X100113663Y-63415272D01* +X100174095Y-63424843D01* +X100199154Y-63443049D01* +X103770774Y-67014669D01* +X103861381Y-67105276D01* +X103924898Y-67147717D01* +X103967916Y-67176461D01* +X103967920Y-67176463D01* +X103967923Y-67176465D01* +X104086306Y-67225501D01* +X104211981Y-67250500D01* +X120138232Y-67250500D01* +X120196423Y-67269407D01* +X120232387Y-67318907D01* +X120232387Y-67380093D01* +X120206204Y-67421477D01* +X120192952Y-67433991D01* +X120184153Y-67437636D01* +X120100313Y-67521475D01* +X120099253Y-67522477D01* +X120072826Y-67535003D01* +X120046767Y-67548281D01* +X120044426Y-67548465D01* +X120043965Y-67548684D01* +X120043280Y-67548555D01* +X120031281Y-67549500D01* +X102126109Y-67549500D01* +X102126101Y-67549499D01* +X102114578Y-67549499D01* +X102014923Y-67549499D01* +X101960989Y-67571839D01* +X101922853Y-67587634D01* +X101852385Y-67658102D01* +X101852386Y-67658103D01* +X101852385Y-67658104D01* +X100841884Y-68668604D01* +X100787367Y-68696381D01* +X100771880Y-68697600D01* +X100308390Y-68697600D01* +X100275247Y-68702429D01* +X100240254Y-68707527D01* +X100135168Y-68758901D01* +X100052451Y-68841618D01* +X100001077Y-68946704D01* +X99999011Y-68960885D01* +X99991150Y-69014840D01* +X99991150Y-69631360D01* +X99995163Y-69658902D01* +X100001077Y-69699495D01* +X100052451Y-69804581D01* +X100052452Y-69804583D01* +X100135167Y-69887298D01* +X100219581Y-69928565D01* +X100235630Y-69936411D01* +X100279604Y-69978954D01* +X100291150Y-70025352D01* +X100291150Y-72910328D01* +X100329285Y-73002396D01* +X100329286Y-73002397D01* +X100762653Y-73435764D01* +X100790431Y-73490280D01* +X100791650Y-73505767D01* +X100791650Y-75140430D01* +X100772743Y-75198621D01* +X100762654Y-75210434D01* +X98365789Y-77607298D01* +X98311272Y-77635075D01* +X98270164Y-77632921D01* +X98217461Y-77618800D01* +X98217459Y-77618800D01* +X98098841Y-77618800D01* +X98028717Y-77637589D01* +X97984259Y-77649502D01* +X97881541Y-77708807D01* +X97797657Y-77792691D01* +X97738352Y-77895409D01* +X97738351Y-77895414D01* +X97707650Y-78009991D01* +X97707650Y-78128609D01* +X97738351Y-78243186D01* +X97738352Y-78243188D01* +X97755044Y-78272099D01* +X97767766Y-78331948D01* +X97742880Y-78387843D01* +X97689892Y-78418436D01* +X97669308Y-78420600D01* +X97060259Y-78420600D01* +X97002068Y-78401693D01* +X96990261Y-78391609D01* +X96909263Y-78310611D01* +X96909260Y-78310609D01* +X96909258Y-78310607D01* +X96806539Y-78251302D01* +X96806540Y-78251302D01* +X96776258Y-78243188D01* +X96691959Y-78220600D01* +X96573341Y-78220600D01* +X96503217Y-78239389D01* +X96458759Y-78251302D01* +X96356041Y-78310607D01* +X96272157Y-78394491D01* +X96212852Y-78497209D01* +X96198640Y-78550250D01* +X96182150Y-78611791D01* +X96182150Y-78730409D01* +X96194049Y-78774816D01* +X96212852Y-78844990D01* +X96272157Y-78947708D01* +X96272159Y-78947710D01* +X96272161Y-78947713D01* +X96356037Y-79031589D01* +X96356039Y-79031590D01* +X96356041Y-79031592D01* +X96458760Y-79090897D01* +X96458761Y-79090897D01* +X96458764Y-79090899D01* +X96573341Y-79121600D01* +X96573343Y-79121600D01* +X96691957Y-79121600D01* +X96691959Y-79121600D01* +X96806536Y-79090899D01* +X96806538Y-79090897D01* +X96806540Y-79090897D01* +X96909258Y-79031592D01* +X96909258Y-79031591D01* +X96909263Y-79031589D01* +X96990257Y-78950594D01* +X97044772Y-78922819D01* +X97060259Y-78921600D01* +X98151297Y-78921600D01* +X98209488Y-78940507D01* +X98245452Y-78990007D01* +X98245452Y-79051193D01* +X98221302Y-79090601D01* +X96594716Y-80717188D01* +X94974670Y-82337234D01* +X94912759Y-82429893D01* +X94912758Y-82429892D01* +X94903485Y-82443770D01* +X94854450Y-82562152D01* +X94854449Y-82562155D01* +X94854449Y-82562156D01* +X94853285Y-82568007D01* +X94829450Y-82687830D01* +X94829450Y-84835146D01* +X94810543Y-84893337D01* +X94800454Y-84905150D01* +X91686370Y-88019234D01* +X91622428Y-88114933D01* +X91622427Y-88114934D01* +X91615186Y-88125769D01* +X91615184Y-88125772D01* +X91566150Y-88244152D01* +X91566149Y-88244155D01* +X91566149Y-88244156D01* +X91563508Y-88257432D01* +X91541150Y-88369830D01* +X91541150Y-97173600D01* +X91522243Y-97231791D01* +X91472743Y-97267755D01* +X91442150Y-97272600D01* +X91160129Y-97272600D01* +X91160126Y-97272601D01* +X91066350Y-97287452D01* +X91066345Y-97287454D01* +X90953309Y-97345049D01* +X90863599Y-97434759D01* +X90806004Y-97547795D01* +X90791150Y-97641578D01* +X90791150Y-99004621D01* +X90791151Y-99004623D01* +X90806002Y-99098399D01* +X90806004Y-99098404D01* +X90863600Y-99211442D01* +X90953308Y-99301150D01* +X91066346Y-99358746D01* +X91160131Y-99373600D01* +X93223168Y-99373599D01* +X93223171Y-99373599D01* +X93223172Y-99373598D01* +X93270061Y-99366172D01* +X93316949Y-99358747D01* +X93316949Y-99358746D01* +X93316954Y-99358746D01* +X93429992Y-99301150D01* +X93519700Y-99211442D01* +X93577296Y-99098404D01* +X93592150Y-99004619D01* +X93592149Y-97641582D01* +X93592149Y-97641581D01* +X93592149Y-97641578D01* +X93592148Y-97641576D01* +X93577297Y-97547800D01* +X93577296Y-97547798D01* +X93577296Y-97547796D01* +X93519700Y-97434758D01* +X93429992Y-97345050D01* +X93316954Y-97287454D01* +X93316955Y-97287454D01* +X93223172Y-97272600D01* +X93223169Y-97272600D01* +X92941150Y-97272600D01* +X92882959Y-97253693D01* +X92846995Y-97204193D01* +X92842150Y-97173600D01* +X92842150Y-94988198D01* +X92861057Y-94930007D01* +X92910557Y-94894043D01* +X92971743Y-94894043D01* +X92984623Y-94899253D01* +X93065257Y-94938673D01* +X93133390Y-94948600D01* +X93133393Y-94948600D01* +X93599907Y-94948600D01* +X93599910Y-94948600D01* +X93668043Y-94938673D01* +X93773133Y-94887298D01* +X93855848Y-94804583D01* +X93907223Y-94699493D01* +X93917150Y-94631360D01* +X93917150Y-94014840D01* +X94466150Y-94014840D01* +X94466150Y-94631360D01* +X94469404Y-94653692D01* +X94476077Y-94699495D01* +X94505120Y-94758902D01* +X94527452Y-94804583D01* +X94610167Y-94887298D01* +X94651064Y-94907291D01* +X94715254Y-94938672D01* +X94715255Y-94938672D01* +X94715257Y-94938673D01* +X94783390Y-94948600D01* +X94783393Y-94948600D01* +X95249907Y-94948600D01* +X95249910Y-94948600D01* +X95318043Y-94938673D01* +X95423133Y-94887298D01* +X95505848Y-94804583D01* +X95557223Y-94699493D01* +X95560429Y-94677491D01* +X95563222Y-94658325D01* +X95590322Y-94603469D01* +X95644490Y-94575018D01* +X95661187Y-94573600D01* +X97722113Y-94573600D01* +X97780304Y-94592507D01* +X97816268Y-94642007D01* +X97820078Y-94658325D01* +X97826076Y-94699492D01* +X97855120Y-94758902D01* +X97877452Y-94804583D01* +X97960167Y-94887298D01* +X98001064Y-94907291D01* +X98065254Y-94938672D01* +X98065255Y-94938672D01* +X98065257Y-94938673D01* +X98133390Y-94948600D01* +X98133393Y-94948600D01* +X98599907Y-94948600D01* +X98599910Y-94948600D01* +X98668043Y-94938673D01* +X98773133Y-94887298D01* +X98855848Y-94804583D01* +X98907223Y-94699493D01* +X98917150Y-94631360D01* +X98917150Y-94167867D01* +X98936057Y-94109676D01* +X98946134Y-94097876D01* +X98973779Y-94070231D01* +X99028293Y-94042456D01* +X99088725Y-94052027D01* +X99113784Y-94070233D01* +X99116651Y-94073100D01* +X99766649Y-94073100D01* +X99766650Y-94073099D01* +X99766650Y-93746009D01* +X99785557Y-93687818D01* +X99795640Y-93676011D01* +X99841239Y-93630413D01* +X99848539Y-93617769D01* +X99900547Y-93527690D01* +X99900547Y-93527688D01* +X99900549Y-93527686D01* +X99931250Y-93413109D01* +X99931250Y-93294491D01* +X99900549Y-93179914D01* +X99900547Y-93179911D01* +X99900547Y-93179909D01* +X99841242Y-93077191D01* +X99841240Y-93077189D01* +X99841239Y-93077187D01* +X99757363Y-92993311D01* +X99757360Y-92993309D01* +X99757358Y-92993307D01* +X99654639Y-92934002D01* +X99654640Y-92934002D01* +X99609366Y-92921871D01* +X99540059Y-92903300D01* +X99421441Y-92903300D01* +X99352134Y-92921871D01* +X99306859Y-92934002D01* +X99204141Y-92993307D01* +X99120257Y-93077191D01* +X99060953Y-93179908D01* +X99060951Y-93179912D01* +X99060951Y-93179914D01* +X99037957Y-93265730D01* +X99033182Y-93283550D01* +X99007559Y-93327929D01* +X98666883Y-93668604D01* +X98612368Y-93696381D01* +X98596881Y-93697600D01* +X98133390Y-93697600D01* +X98100247Y-93702429D01* +X98065254Y-93707527D01* +X97960168Y-93758901D01* +X97877451Y-93841618D01* +X97826076Y-93946707D01* +X97820078Y-93987875D01* +X97792978Y-94042731D01* +X97738810Y-94071182D01* +X97722113Y-94072600D01* +X95661187Y-94072600D01* +X95602996Y-94053693D01* +X95567032Y-94004193D01* +X95563222Y-93987875D01* +X95557223Y-93946707D01* +X95545584Y-93922899D01* +X95505848Y-93841617D01* +X95423133Y-93758902D01* +X95396760Y-93746009D01* +X95318045Y-93707527D01* +X95289038Y-93703301D01* +X95249910Y-93697600D01* +X94783390Y-93697600D01* +X94750247Y-93702429D01* +X94715254Y-93707527D01* +X94610168Y-93758901D01* +X94527451Y-93841618D01* +X94476077Y-93946704D01* +X94472318Y-93972506D01* +X94466150Y-94014840D01* +X93917150Y-94014840D01* +X93907223Y-93946707D01* +X93904823Y-93941798D01* +X93882133Y-93895385D01* +X93855848Y-93841617D01* +X93773133Y-93758902D01* +X93771975Y-93758336D01* +X93767625Y-93756209D01* +X93723653Y-93713663D01* +X93713087Y-93653397D01* +X93725374Y-93617769D01* +X93727137Y-93614714D01* +X93727139Y-93614713D01* +X93786449Y-93511986D01* +X93817150Y-93397409D01* +X93817150Y-93278791D01* +X93786449Y-93164214D01* +X93786447Y-93164211D01* +X93786447Y-93164209D01* +X93727142Y-93061491D01* +X93727140Y-93061489D01* +X93727139Y-93061487D01* +X93643263Y-92977611D01* +X93643260Y-92977609D01* +X93643258Y-92977607D01* +X93540539Y-92918302D01* +X93540540Y-92918302D01* +X93496800Y-92906582D01* +X93425959Y-92887600D01* +X93307341Y-92887600D01* +X93248748Y-92903300D01* +X93192759Y-92918302D01* +X93090041Y-92977607D01* +X93090040Y-92977608D01* +X93090037Y-92977610D01* +X93090037Y-92977611D01* +X93011151Y-93056496D01* +X92956637Y-93084272D01* +X92896205Y-93074701D01* +X92852940Y-93031436D01* +X92842150Y-92986491D01* +X92842150Y-88744353D01* +X92861057Y-88686162D01* +X92871140Y-88674355D01* +X95985226Y-85560270D01* +X96056415Y-85453727D01* +X96105451Y-85335344D01* +X96105789Y-85333644D01* +X96106838Y-85328374D01* +X96129564Y-85214121D01* +X96130450Y-85209669D01* +X96130450Y-83981315D01* +X96149357Y-83923124D01* +X96198857Y-83887160D01* +X96260043Y-83887160D01* +X96299040Y-83915493D01* +X96301024Y-83913510D01* +X96306823Y-83919309D01* +X96306824Y-83919311D01* +X96395439Y-84007926D01* +X96508025Y-84062966D01* +X96581014Y-84073600D01* +X96581017Y-84073600D01* +X97102282Y-84073600D01* +X97102286Y-84073600D01* +X97175275Y-84062966D01* +X97287861Y-84007926D01* +X97376476Y-83919311D01* +X97431516Y-83806725D01* +X97442150Y-83733736D01* +X97442150Y-83547253D01* +X97461057Y-83489062D01* +X97503265Y-83455789D01* +X97588545Y-83420465D01* +X97588545Y-83420464D01* +X97588547Y-83420464D01* +X97726413Y-83282596D01* +X97780930Y-83254819D01* +X97796417Y-83253600D01* +X97910957Y-83253600D01* +X97910959Y-83253600D01* +X98025536Y-83222899D01* +X98055749Y-83205454D01* +X98115597Y-83192733D01* +X98171493Y-83217619D01* +X98202086Y-83270606D01* +X98204250Y-83291191D01* +X98204250Y-87303101D01* +X98185343Y-87361292D01* +X98175259Y-87373098D01* +X98131708Y-87416650D01* +X98088599Y-87459759D01* +X98031004Y-87572795D01* +X98016150Y-87666578D01* +X98016150Y-87739290D01* +X97999466Y-87794291D01* +X97931137Y-87896553D01* +X97863256Y-88060430D01* +X97863254Y-88060436D01* +X97828650Y-88234405D01* +X97828650Y-88411794D01* +X97863254Y-88585763D01* +X97863256Y-88585769D01* +X97931137Y-88749646D01* +X97999466Y-88851909D01* +X98016150Y-88906909D01* +X98016150Y-88979620D01* +X98016151Y-88979623D01* +X98031002Y-89073399D01* +X98031004Y-89073404D01* +X98088600Y-89186442D01* +X98178308Y-89276150D01* +X98291346Y-89333746D01* +X98385131Y-89348600D01* +X98440140Y-89348599D01* +X98498330Y-89367505D01* +X98510145Y-89377595D01* +X100455654Y-91323104D01* +X100483431Y-91377621D01* +X100484650Y-91393108D01* +X100484650Y-93263868D01* +X100465743Y-93322059D01* +X100416243Y-93358023D01* +X100356201Y-93358387D01* +X100343753Y-93354508D01* +X100273231Y-93348100D01* +X100266651Y-93348100D01* +X100266650Y-93348101D01* +X100266650Y-94224100D01* +X100247743Y-94282291D01* +X100198243Y-94318255D01* +X100167650Y-94323100D01* +X100016651Y-94323100D01* +X100016650Y-94323101D01* +X100016650Y-94474100D01* +X99997743Y-94532291D01* +X99948243Y-94568255D01* +X99917650Y-94573100D01* +X99116652Y-94573100D01* +X99116651Y-94573101D01* +X99116651Y-94654682D01* +X99123058Y-94725203D01* +X99123060Y-94725209D01* +X99173629Y-94887492D01* +X99173632Y-94887500D01* +X99261574Y-95032972D01* +X99381777Y-95153175D01* +X99527249Y-95241117D01* +X99527257Y-95241120D01* +X99689539Y-95291689D01* +X99694683Y-95292713D01* +X99694300Y-95294635D01* +X99743099Y-95315541D01* +X99774437Y-95368091D01* +X99768902Y-95429026D01* +X99747905Y-95460045D01* +X98990983Y-96216967D01* +X98892437Y-96364453D01* +X98824556Y-96528330D01* +X98824554Y-96528336D01* +X98789950Y-96702305D01* +X98789950Y-96879694D01* +X98824554Y-97053663D01* +X98824556Y-97053669D01* +X98892437Y-97217546D01* +X98952000Y-97306689D01* +X98968608Y-97365577D01* +X98947430Y-97422981D01* +X98896556Y-97456973D01* +X98885173Y-97459471D01* +X98866348Y-97462452D01* +X98866345Y-97462454D01* +X98753309Y-97520049D01* +X98663599Y-97609759D01* +X98606004Y-97722795D01* +X98592033Y-97811009D01* +X98591150Y-97816581D01* +X98591150Y-98254415D01* +X98590250Y-98258942D01* +X98590250Y-98387258D01* +X98591150Y-98391785D01* +X98591150Y-98829620D01* +X98591151Y-98829623D01* +X98606002Y-98923399D01* +X98606004Y-98923404D01* +X98663600Y-99036442D01* +X98753308Y-99126150D01* +X98866346Y-99183746D01* +X98960131Y-99198600D01* +X99523168Y-99198599D01* +X99523170Y-99198599D01* +X99523171Y-99198598D01* +X99570061Y-99191172D01* +X99616949Y-99183747D01* +X99616949Y-99183746D01* +X99616954Y-99183746D01* +X99729992Y-99126150D01* +X99819700Y-99036442D01* +X99877296Y-98923404D01* +X99892150Y-98829619D01* +X99892149Y-98634825D01* +X99894617Y-98627228D01* +X99893368Y-98619339D01* +X99903892Y-98598682D01* +X99911056Y-98576636D01* +X99921138Y-98564829D01* +X99972648Y-98513319D01* +X100027163Y-98485544D01* +X100087595Y-98495115D01* +X100130860Y-98538380D01* +X100141650Y-98583325D01* +X100141650Y-98848086D01* +X100152142Y-98950787D01* +X100152145Y-98950799D01* +X100207293Y-99117224D01* +X100299330Y-99266440D01* +X100427384Y-99394494D01* +X100425894Y-99395983D01* +X100454857Y-99439477D01* +X100452359Y-99500612D01* +X100414404Y-99548602D01* +X100359532Y-99565200D01* +X98394704Y-99565200D01* +X98336513Y-99546293D01* +X98324700Y-99536204D01* +X97621145Y-98832649D01* +X97593368Y-98778132D01* +X97592149Y-98762645D01* +X97592149Y-97641578D01* +X97592148Y-97641576D01* +X97577297Y-97547800D01* +X97577296Y-97547798D01* +X97577296Y-97547796D01* +X97519700Y-97434758D01* +X97429992Y-97345050D01* +X97316954Y-97287454D01* +X97316955Y-97287454D01* +X97223171Y-97272600D01* +X95160128Y-97272600D01* +X95160126Y-97272601D01* +X95066350Y-97287452D01* +X95066345Y-97287454D01* +X94953309Y-97345049D01* +X94863599Y-97434759D01* +X94806004Y-97547795D01* +X94791150Y-97641578D01* +X94791150Y-99004621D01* +X94791151Y-99004623D01* +X94806002Y-99098399D01* +X94806004Y-99098404D01* +X94863600Y-99211442D01* +X94953308Y-99301150D01* +X95066346Y-99358746D01* +X95160131Y-99373600D01* +X96281195Y-99373599D01* +X96339386Y-99392506D01* +X96351199Y-99402595D01* +X97669581Y-100720977D01* +X97669584Y-100720979D01* +X97776119Y-100792163D01* +X97776120Y-100792163D01* +X97776124Y-100792166D01* +X97818970Y-100809913D01* +X97894506Y-100841201D01* +X97924219Y-100847111D01* +X97930977Y-100849509D01* +X97949829Y-100863992D01* +X97970574Y-100875610D01* +X97973656Y-100882297D01* +X97979497Y-100886784D01* +X97986236Y-100909584D01* +X97996190Y-100931175D01* +X97994753Y-100938397D01* +X97996841Y-100945460D01* +X97988891Y-100967867D01* +X97984253Y-100991185D01* +X97983613Y-100992311D01* +X97954051Y-101043512D01* +X97946743Y-101070787D01* +X97923350Y-101158091D01* +X97923350Y-101276709D01* +X97942479Y-101348099D01* +X97954052Y-101391290D01* +X98013357Y-101494008D01* +X98013359Y-101494010D01* +X98013361Y-101494013D01* +X98019915Y-101500567D01* +X98027032Y-101514536D01* +X98038119Y-101525622D01* +X98040572Y-101541110D01* +X98047691Y-101555082D01* +X98045238Y-101570568D01* +X98047691Y-101586054D01* +X98040573Y-101600024D01* +X98038120Y-101615514D01* +X98019915Y-101640571D01* +X97991885Y-101668602D01* +X97937369Y-101696381D01* +X97921880Y-101697600D01* +X97458390Y-101697600D01* +X97425247Y-101702429D01* +X97390254Y-101707527D01* +X97285168Y-101758901D01* +X97202451Y-101841618D01* +X97151077Y-101946704D01* +X97146358Y-101979096D01* +X97141150Y-102014840D01* +X97141150Y-102631360D01* +X97143215Y-102645531D01* +X97151077Y-102699495D01* +X97192345Y-102783909D01* +X97202452Y-102804583D01* +X97285167Y-102887298D01* +X97323769Y-102906169D01* +X97390254Y-102938672D01* +X97390255Y-102938672D01* +X97390257Y-102938673D01* +X97458390Y-102948600D01* +X97458393Y-102948600D01* +X97924907Y-102948600D01* +X97924910Y-102948600D01* +X97993043Y-102938673D01* +X98098133Y-102887298D01* +X98180848Y-102804583D01* +X98232223Y-102699493D01* +X98242150Y-102631360D01* +X98242150Y-102167867D01* +X98261057Y-102109677D01* +X98271146Y-102097864D01* +X98567314Y-101801696D01* +X98621831Y-101773919D01* +X98637318Y-101772700D01* +X98808899Y-101772700D01* +X98867090Y-101791607D01* +X98903054Y-101841107D01* +X98903054Y-101902293D01* +X98867090Y-101951793D01* +X98858399Y-101957436D01* +X98849441Y-101962607D01* +X98765557Y-102046491D01* +X98706252Y-102149209D01* +X98694438Y-102193299D01* +X98675550Y-102263791D01* +X98675550Y-102382409D01* +X98692604Y-102446054D01* +X98706251Y-102496986D01* +X98706252Y-102496989D01* +X98765557Y-102599708D01* +X98765559Y-102599710D01* +X98765561Y-102599713D01* +X98849437Y-102683589D01* +X98849439Y-102683590D01* +X98849441Y-102683592D01* +X98952160Y-102742897D01* +X98952161Y-102742897D01* +X98952164Y-102742899D01* +X99066741Y-102773600D01* +X99066743Y-102773600D01* +X99185357Y-102773600D01* +X99185359Y-102773600D01* +X99299936Y-102742899D01* +X99381495Y-102695810D01* +X99394246Y-102693099D01* +X99405165Y-102685976D01* +X99423438Y-102686894D01* +X99441340Y-102683089D01* +X99453252Y-102688392D01* +X99466273Y-102689047D01* +X99477255Y-102699079D01* +X99497236Y-102707975D01* +X99513906Y-102727450D01* +X99517249Y-102732573D01* +X99552452Y-102804583D01* +X99586348Y-102838479D01* +X99591975Y-102847103D01* +X99597401Y-102867181D01* +X99606843Y-102885713D01* +X99605204Y-102896057D01* +X99607937Y-102906169D01* +X99600525Y-102925601D01* +X99597272Y-102946145D01* +X99589865Y-102953551D01* +X99586133Y-102963338D01* +X99568714Y-102974702D01* +X99554007Y-102989410D01* +X99541611Y-102992385D01* +X99534890Y-102996771D01* +X99525343Y-102996291D01* +X99509062Y-103000200D01* +X99414141Y-103000200D01* +X99355399Y-103015940D01* +X99299559Y-103030902D01* +X99196841Y-103090207D01* +X99196840Y-103090208D01* +X99196837Y-103090210D01* +X99196837Y-103090211D01* +X99115842Y-103171205D01* +X99061328Y-103198981D01* +X99045841Y-103200200D01* +X97314019Y-103200200D01* +X97255828Y-103181293D01* +X97244015Y-103171204D01* +X96621146Y-102548335D01* +X96593369Y-102493818D01* +X96592150Y-102478331D01* +X96592150Y-102014841D01* +X96592150Y-102014840D01* +X96582223Y-101946707D01* +X96571430Y-101924630D01* +X96547678Y-101876044D01* +X96530848Y-101841617D01* +X96448133Y-101758902D01* +X96447718Y-101758699D01* +X96343045Y-101707527D01* +X96308053Y-101702429D01* +X96274910Y-101697600D01* +X95808390Y-101697600D01* +X95775247Y-101702429D01* +X95740254Y-101707527D01* +X95635168Y-101758901D01* +X95552451Y-101841618D01* +X95501077Y-101946704D01* +X95496358Y-101979096D01* +X95491150Y-102014840D01* +X95491150Y-102631360D01* +X95493215Y-102645531D01* +X95501077Y-102699495D01* +X95542345Y-102783909D01* +X95552452Y-102804583D01* +X95635167Y-102887298D01* +X95673769Y-102906169D01* +X95740254Y-102938672D01* +X95740255Y-102938672D01* +X95740257Y-102938673D01* +X95808390Y-102948600D01* +X95808393Y-102948600D01* +X96271881Y-102948600D01* +X96330072Y-102967507D01* +X96341885Y-102977596D01* +X97027353Y-103663064D01* +X97027354Y-103663064D01* +X97027355Y-103663065D01* +X97119421Y-103701200D01* +X97119422Y-103701200D01* +X97219078Y-103701200D01* +X99045841Y-103701200D01* +X99104032Y-103720107D01* +X99115838Y-103730190D01* +X99196837Y-103811189D01* +X99196839Y-103811190D01* +X99196841Y-103811192D01* +X99299560Y-103870497D01* +X99299561Y-103870497D01* +X99299564Y-103870499D01* +X99414141Y-103901200D01* +X99414143Y-103901200D01* +X99532757Y-103901200D01* +X99532759Y-103901200D01* +X99647336Y-103870499D01* +X99676148Y-103853863D01* +X99735996Y-103841141D01* +X99791892Y-103866026D01* +X99822486Y-103919013D01* +X99824650Y-103939599D01* +X99824650Y-104144830D01* +X99805743Y-104203021D01* +X99795654Y-104214834D01* +X97341884Y-106668604D01* +X97287367Y-106696381D01* +X97271880Y-106697600D01* +X96808390Y-106697600D01* +X96778301Y-106701984D01* +X96740254Y-106707527D01* +X96635168Y-106758901D01* +X96552451Y-106841618D01* +X96501077Y-106946704D01* +X96501077Y-106946707D01* +X96491150Y-107014840D01* +X96491150Y-107631360D01* +X96497145Y-107672507D01* +X96501077Y-107699495D01* +X96538873Y-107776807D01* +X96552452Y-107804583D01* +X96635167Y-107887298D01* +X96688935Y-107913583D01* +X96740254Y-107938672D01* +X96740255Y-107938672D01* +X96740257Y-107938673D01* +X96808390Y-107948600D01* +X96808393Y-107948600D01* +X97274907Y-107948600D01* +X97274910Y-107948600D01* +X97343043Y-107938673D01* +X97448133Y-107887298D01* +X97530848Y-107804583D01* +X97582223Y-107699493D01* +X97592150Y-107631360D01* +X97592150Y-107167867D01* +X97611057Y-107109676D01* +X97621140Y-107097869D01* +X100217045Y-104501964D01* +X100217047Y-104501964D01* +X100287514Y-104431497D01* +X100325650Y-104339428D01* +X100325650Y-103008975D01* +X100344557Y-102950784D01* +X100381170Y-102920034D01* +X100409531Y-102906169D01* +X100448133Y-102887298D01* +X100530848Y-102804583D01* +X100582223Y-102699493D01* +X100592150Y-102631360D01* +X100592150Y-102014840D01* +X100582223Y-101946707D01* +X100581507Y-101945242D01* +X100566811Y-101915180D01* +X100565807Y-101908088D01* +X100561597Y-101902293D01* +X100561597Y-101878326D01* +X100558240Y-101854598D01* +X100561597Y-101848270D01* +X100561597Y-101841107D01* +X100575685Y-101821716D01* +X100586916Y-101800548D01* +X100593350Y-101797402D01* +X100597561Y-101791607D01* +X100620354Y-101784201D01* +X100641884Y-101773676D01* +X100655752Y-101772700D01* +X100745982Y-101772700D01* +X100804173Y-101791607D01* +X100815985Y-101801696D01* +X101112153Y-102097863D01* +X101139931Y-102152380D01* +X101141150Y-102167867D01* +X101141150Y-102631360D01* +X101143215Y-102645531D01* +X101151077Y-102699495D01* +X101192345Y-102783909D01* +X101202452Y-102804583D01* +X101285167Y-102887298D01* +X101323769Y-102906169D01* +X101390254Y-102938672D01* +X101390255Y-102938672D01* +X101390257Y-102938673D01* +X101458390Y-102948600D01* +X101458393Y-102948600D01* +X101903642Y-102948600D01* +X101961833Y-102967507D01* +X101997797Y-103017007D01* +X101997797Y-103078193D01* +X101973646Y-103117604D01* +X100607481Y-104483769D01* +X100572943Y-104535462D01* +X100572942Y-104535464D01* +X100508935Y-104631255D01* +X100475722Y-104711441D01* +X100475722Y-104711442D01* +X100441056Y-104795130D01* +X100441054Y-104795138D01* +X100436648Y-104817289D01* +X100410094Y-104950793D01* +X100407349Y-104964592D01* +X100407348Y-104964596D01* +X100406450Y-104969107D01* +X100406450Y-106643793D01* +X100387543Y-106701984D01* +X100377454Y-106713797D01* +X100342185Y-106749065D01* +X100243635Y-106896554D01* +X100243635Y-106896555D01* +X100196133Y-107011238D01* +X100156397Y-107057764D01* +X100096902Y-107072048D01* +X100055169Y-107059090D01* +X99963737Y-107006301D01* +X99908565Y-106991518D01* +X99849159Y-106975600D01* +X99730541Y-106975600D01* +X99671135Y-106991518D01* +X99615959Y-107006302D01* +X99513241Y-107065607D01* +X99513240Y-107065608D01* +X99513237Y-107065610D01* +X99513237Y-107065611D01* +X99432242Y-107146605D01* +X99425127Y-107150230D01* +X99420432Y-107156693D01* +X99398383Y-107163856D01* +X99377728Y-107174381D01* +X99362241Y-107175600D01* +X99341150Y-107175600D01* +X99282959Y-107156693D01* +X99246995Y-107107193D01* +X99242150Y-107076600D01* +X99242150Y-107014843D01* +X99242150Y-107014840D01* +X99232223Y-106946707D01* +X99219650Y-106920989D01* +X99190267Y-106860885D01* +X99180848Y-106841617D01* +X99098133Y-106758902D01* +X99059129Y-106739834D01* +X98993045Y-106707527D01* +X98965789Y-106703556D01* +X98924910Y-106697600D01* +X98458390Y-106697600D01* +X98428301Y-106701984D01* +X98390254Y-106707527D01* +X98285168Y-106758901D01* +X98202451Y-106841618D01* +X98151077Y-106946704D01* +X98151077Y-106946707D01* +X98141150Y-107014840D01* +X98141150Y-107631360D01* +X98147145Y-107672507D01* +X98151077Y-107699495D01* +X98188873Y-107776807D01* +X98202452Y-107804583D01* +X98285167Y-107887298D01* +X98338935Y-107913583D01* +X98390254Y-107938672D01* +X98390255Y-107938672D01* +X98390257Y-107938673D01* +X98458390Y-107948600D01* +X98458393Y-107948600D01* +X98924907Y-107948600D01* +X98924910Y-107948600D01* +X98993043Y-107938673D01* +X99098133Y-107887298D01* +X99180848Y-107804583D01* +X99216273Y-107732118D01* +X99232933Y-107714898D01* +X99247022Y-107695507D01* +X99253835Y-107693293D01* +X99258815Y-107688146D01* +X99305213Y-107676600D01* +X99362241Y-107676600D01* +X99420432Y-107695507D01* +X99432238Y-107705590D01* +X99513237Y-107786589D01* +X99513239Y-107786590D01* +X99513241Y-107786592D01* +X99615960Y-107845897D01* +X99615961Y-107845897D01* +X99615964Y-107845899D01* +X99730541Y-107876600D01* +X99730543Y-107876600D01* +X99849157Y-107876600D01* +X99849159Y-107876600D01* +X99963736Y-107845899D01* +X99963738Y-107845897D01* +X99963740Y-107845897D01* +X100066458Y-107786592D01* +X100066458Y-107786591D01* +X100066463Y-107786589D01* +X100102170Y-107750881D01* +X100156684Y-107723105D01* +X100217116Y-107732676D01* +X100254485Y-107765882D01* +X100342186Y-107897135D01* +X100467615Y-108022564D01* +X100615103Y-108121113D01* +X100615104Y-108121113D01* +X100615105Y-108121114D01* +X100654180Y-108137299D01* +X100778984Y-108188994D01* +X100828353Y-108198813D01* +X100879042Y-108225907D01* +X101046627Y-108393492D01* +X101191939Y-108538803D01* +X101219717Y-108593320D01* +X101219034Y-108628120D01* +X101191150Y-108768303D01* +X101191150Y-112411793D01* +X101204357Y-112478189D01* +X101224984Y-112581887D01* +X101225756Y-112585765D01* +X101225756Y-112585767D01* +X101293635Y-112749644D01* +X101293635Y-112749645D01* +X101392185Y-112897134D01* +X101490547Y-112995496D01* +X101518324Y-113050013D01* +X101508753Y-113110445D01* +X101465488Y-113153710D01* +X101420543Y-113164500D01* +X100417746Y-113164500D01* +X100359555Y-113145593D01* +X100323591Y-113096093D01* +X100323591Y-113034907D01* +X100333024Y-113014283D01* +X100409667Y-112887500D01* +X100409670Y-112887492D01* +X100460239Y-112725210D01* +X100460241Y-112725204D01* +X100466649Y-112654681D01* +X100466650Y-112654668D01* +X100466650Y-112573101D01* +X100466649Y-112573100D01* +X98666652Y-112573100D01* +X98666651Y-112573101D01* +X98666651Y-112654682D01* +X98673058Y-112725203D01* +X98673060Y-112725209D01* +X98723629Y-112887492D01* +X98723632Y-112887500D01* +X98800276Y-113014283D01* +X98814200Y-113073863D01* +X98790444Y-113130249D01* +X98738083Y-113161902D01* +X98715554Y-113164500D01* +X98274921Y-113164500D01* +X98182855Y-113202634D01* +X95716884Y-115668604D01* +X95662367Y-115696381D01* +X95646880Y-115697600D01* +X95156014Y-115697600D01* +X95112220Y-115703980D01* +X95083023Y-115708234D01* +X94970440Y-115763273D01* +X94881823Y-115851890D01* +X94826784Y-115964473D01* +X94826784Y-115964475D01* +X94816150Y-116037464D01* +X94816150Y-116608736D01* +X94822512Y-116652400D01* +X94826784Y-116681726D01* +X94868873Y-116767819D01* +X94877444Y-116828402D01* +X94848769Y-116882451D01* +X94793800Y-116909324D01* +X94779932Y-116910300D01* +X93980780Y-116910300D01* +X93922589Y-116891393D01* +X93886625Y-116841893D01* +X93886625Y-116780707D01* +X93886805Y-116780160D01* +X93906506Y-116720703D01* +X93916650Y-116621423D01* +X93916650Y-116573101D01* +X93916649Y-116573100D01* +X93065650Y-116573100D01* +X93007459Y-116554193D01* +X92971495Y-116504693D01* +X92966650Y-116474100D01* +X92966650Y-116323101D01* +X92966649Y-116323100D01* +X92815650Y-116323100D01* +X92757459Y-116304193D01* +X92721495Y-116254693D01* +X92716650Y-116224100D01* +X92716650Y-115418368D01* +X92719118Y-115410770D01* +X92717869Y-115402881D01* +X92728393Y-115382225D01* +X92735557Y-115360177D01* +X92745640Y-115348370D01* +X92745909Y-115348101D01* +X93216650Y-115348101D01* +X93216650Y-116073099D01* +X93216651Y-116073100D01* +X93916648Y-116073100D01* +X93916649Y-116073099D01* +X93916649Y-116024777D01* +X93906507Y-115925502D01* +X93906504Y-115925490D01* +X93853195Y-115764612D01* +X93764224Y-115620370D01* +X93644379Y-115500525D01* +X93500137Y-115411554D01* +X93339253Y-115358243D01* +X93239973Y-115348100D01* +X93216651Y-115348100D01* +X93216650Y-115348101D01* +X92745909Y-115348101D01* +X93279014Y-114814997D01* +X93317150Y-114722928D01* +X93317150Y-114623273D01* +X93317150Y-113480400D01* +X93336057Y-113422209D01* +X93385557Y-113386245D01* +X93416150Y-113381400D01* +X97158679Y-113381400D01* +X97231346Y-113351300D01* +X97250747Y-113343264D01* +X97616413Y-112977596D01* +X97670930Y-112949819D01* +X97686417Y-112948600D01* +X98149907Y-112948600D01* +X98149910Y-112948600D01* +X98218043Y-112938673D01* +X98323133Y-112887298D01* +X98405848Y-112804583D01* +X98457223Y-112699493D01* +X98467150Y-112631360D01* +X98467150Y-112014840D01* +X98463752Y-111991518D01* +X98666650Y-111991518D01* +X98666650Y-112073099D01* +X98666651Y-112073100D01* +X99316649Y-112073100D01* +X99316650Y-112073099D01* +X99316650Y-111348101D01* +X99816650Y-111348101D01* +X99816650Y-112073099D01* +X99816651Y-112073100D01* +X100466648Y-112073100D01* +X100466649Y-112073099D01* +X100466649Y-111991533D01* +X100466648Y-111991517D01* +X100460241Y-111920996D01* +X100460239Y-111920990D01* +X100409670Y-111758707D01* +X100409667Y-111758699D01* +X100321725Y-111613227D01* +X100201522Y-111493024D01* +X100056050Y-111405082D01* +X100056042Y-111405079D01* +X99893760Y-111354510D01* +X99893754Y-111354508D01* +X99823231Y-111348100D01* +X99816651Y-111348100D01* +X99816650Y-111348101D01* +X99316650Y-111348101D01* +X99316648Y-111348099D01* +X99310075Y-111348100D01* +X99239546Y-111354508D01* +X99239540Y-111354510D01* +X99077257Y-111405079D01* +X99077249Y-111405082D01* +X98931777Y-111493024D01* +X98811574Y-111613227D01* +X98723632Y-111758699D01* +X98723629Y-111758707D01* +X98673060Y-111920989D01* +X98673058Y-111920995D01* +X98666650Y-111991518D01* +X98463752Y-111991518D01* +X98457223Y-111946707D01* +X98457221Y-111946703D01* +X98430422Y-111891884D01* +X98405848Y-111841617D01* +X98323133Y-111758902D01* +X98303492Y-111749300D01* +X98218045Y-111707527D01* +X98183053Y-111702429D01* +X98149910Y-111697600D01* +X97683390Y-111697600D01* +X97650247Y-111702429D01* +X97615254Y-111707527D01* +X97510168Y-111758901D01* +X97427451Y-111841618D01* +X97376077Y-111946704D01* +X97373488Y-111964473D01* +X97366151Y-112014837D01* +X97366150Y-112014843D01* +X97366150Y-112478331D01* +X97363681Y-112485928D01* +X97364931Y-112493818D01* +X97354406Y-112514473D01* +X97347243Y-112536522D01* +X97337154Y-112548335D01* +X97297023Y-112588466D01* +X97242506Y-112616243D01* +X97182074Y-112606672D01* +X97157015Y-112588466D01* +X97141649Y-112573100D01* +X96491651Y-112573100D01* +X96491650Y-112573101D01* +X96491650Y-112781400D01* +X96472743Y-112839591D01* +X96423243Y-112875555D01* +X96392650Y-112880400D01* +X96090650Y-112880400D01* +X96032459Y-112861493D01* +X95996495Y-112811993D01* +X95991650Y-112781400D01* +X95991650Y-112573101D01* +X95991649Y-112573100D01* +X95341652Y-112573100D01* +X95341651Y-112573101D01* +X95341651Y-112654682D01* +X95348058Y-112725203D01* +X95348060Y-112725209D01* +X95356392Y-112751947D01* +X95356030Y-112781893D01* +X95356030Y-112811993D01* +X95355660Y-112812501D01* +X95355653Y-112813128D01* +X95337733Y-112837176D01* +X95320066Y-112861493D01* +X95319468Y-112861687D01* +X95319094Y-112862190D01* +X95261875Y-112880400D01* +X95202379Y-112880400D01* +X95144188Y-112861493D01* +X95108224Y-112811993D01* +X95108224Y-112750807D01* +X95113438Y-112737920D01* +X95132222Y-112699495D01* +X95132221Y-112699495D01* +X95132223Y-112699493D01* +X95142150Y-112631360D01* +X95142150Y-112014840D01* +X95138752Y-111991518D01* +X95341650Y-111991518D01* +X95341650Y-112073099D01* +X95341651Y-112073100D01* +X95991649Y-112073100D01* +X95991650Y-112073099D01* +X95991650Y-111348101D01* +X96491650Y-111348101D01* +X96491650Y-112073099D01* +X96491651Y-112073100D01* +X97141648Y-112073100D01* +X97141649Y-112073099D01* +X97141649Y-111991533D01* +X97141648Y-111991517D01* +X97135241Y-111920996D01* +X97135239Y-111920990D01* +X97084670Y-111758707D01* +X97084667Y-111758699D01* +X96996725Y-111613227D01* +X96876522Y-111493024D01* +X96731050Y-111405082D01* +X96731042Y-111405079D01* +X96568760Y-111354510D01* +X96568754Y-111354508D01* +X96498231Y-111348100D01* +X96491651Y-111348100D01* +X96491650Y-111348101D01* +X95991650Y-111348101D01* +X95991648Y-111348099D01* +X95985075Y-111348100D01* +X95914546Y-111354508D01* +X95914540Y-111354510D01* +X95752257Y-111405079D01* +X95752249Y-111405082D01* +X95606777Y-111493024D01* +X95486574Y-111613227D01* +X95398632Y-111758699D01* +X95398629Y-111758707D01* +X95348060Y-111920989D01* +X95348058Y-111920995D01* +X95341650Y-111991518D01* +X95138752Y-111991518D01* +X95132223Y-111946707D01* +X95132162Y-111946582D01* +X95130907Y-111944013D01* +X95120850Y-111900538D01* +X95120850Y-105526671D01* +X95082715Y-105434605D01* +X95082714Y-105434604D01* +X95082714Y-105434603D01* +X95012247Y-105364136D01* +X95012245Y-105364135D01* +X94308847Y-104660736D01* +X94308845Y-104660735D01* +X94308844Y-104660734D01* +X94216779Y-104622600D01* +X94216778Y-104622600D01* +X92752772Y-104622600D01* +X92694581Y-104603693D01* +X92662207Y-104563587D01* +X92656356Y-104550336D01* +X92656356Y-104550335D01* +X92576915Y-104470894D01* +X92474141Y-104425515D01* +X92474140Y-104425514D01* +X92474138Y-104425514D01* +X92449019Y-104422600D01* +X92449015Y-104422600D01* +X91855119Y-104422600D01* +X91796928Y-104403693D01* +X91785115Y-104393604D01* +X91576246Y-104184735D01* +X91548469Y-104130218D01* +X91547250Y-104114731D01* +X91547250Y-104000192D01* +X91543950Y-103987875D01* +X91516549Y-103885614D01* +X91516547Y-103885611D01* +X91516547Y-103885609D01* +X91457242Y-103782891D01* +X91457240Y-103782889D01* +X91457239Y-103782887D01* +X91373363Y-103699011D01* +X91373360Y-103699009D01* +X91373358Y-103699007D01* +X91270639Y-103639702D01* +X91270640Y-103639702D01* +X91257101Y-103636074D01* +X91156059Y-103609000D01* +X91037441Y-103609000D01* +X90967317Y-103627789D01* +X90922859Y-103639702D01* +X90820141Y-103699007D01* +X90736257Y-103782891D01* +X90676952Y-103885609D01* +X90666903Y-103923112D01* +X90646250Y-104000191D01* +X90646250Y-104118809D01* +X90663915Y-104184735D01* +X90676952Y-104233390D01* +X90736257Y-104336108D01* +X90736259Y-104336110D01* +X90736261Y-104336113D01* +X90820137Y-104419989D01* +X90820139Y-104419990D01* +X90820141Y-104419992D01* +X90913993Y-104474178D01* +X90954934Y-104519647D01* +X90961330Y-104580498D01* +X90955058Y-104599901D01* +X90931565Y-104653108D01* +X90931564Y-104653111D01* +X90928650Y-104678230D01* +X90928650Y-105067960D01* +X90928651Y-105067963D01* +X90931564Y-105093090D01* +X90946162Y-105126150D01* +X90976944Y-105195865D01* +X91056385Y-105275306D01* +X91159159Y-105320685D01* +X91184285Y-105323600D01* +X92449014Y-105323599D01* +X92474141Y-105320685D01* +X92576915Y-105275306D01* +X92656356Y-105195865D01* +X92662207Y-105182612D01* +X92703007Y-105137017D01* +X92752772Y-105123600D01* +X94022181Y-105123600D01* +X94029778Y-105126068D01* +X94037668Y-105124819D01* +X94058323Y-105135343D01* +X94080372Y-105142507D01* +X94092185Y-105152596D01* +X94143185Y-105203596D01* +X94170962Y-105258113D01* +X94161391Y-105318545D01* +X94118126Y-105361810D01* +X94073181Y-105372600D01* +X93059289Y-105372600D01* +X93059286Y-105372601D01* +X93034159Y-105375514D01* +X92931385Y-105420894D01* +X92851944Y-105500335D01* +X92806564Y-105603111D01* +X92803650Y-105628230D01* +X92803650Y-105931386D01* +X92784743Y-105989577D01* +X92735243Y-106025541D01* +X92674057Y-106025541D01* +X92665341Y-106022248D01* +X92664347Y-106021818D01* +X92506639Y-105975999D01* +X92469787Y-105973100D01* +X92066651Y-105973100D01* +X92066650Y-105973101D01* +X92066650Y-106523099D01* +X92066651Y-106523100D01* +X93051445Y-106523100D01* +X93051250Y-106520613D01* +X93051248Y-106520606D01* +X93016273Y-106400219D01* +X93018195Y-106339064D01* +X93055696Y-106290718D01* +X93111339Y-106273599D01* +X93342150Y-106273599D01* +X93357062Y-106278444D01* +X93372743Y-106278444D01* +X93385428Y-106287660D01* +X93400341Y-106292506D01* +X93409557Y-106305191D01* +X93422243Y-106314408D01* +X93427088Y-106329320D01* +X93436305Y-106342006D01* +X93441150Y-106372599D01* +X93441150Y-106489831D01* +X93422243Y-106548022D01* +X93412154Y-106559835D01* +X92977885Y-106994104D01* +X92923368Y-107021881D01* +X92907881Y-107023100D01* +X92066651Y-107023100D01* +X92066650Y-107023101D01* +X92066650Y-107573099D01* +X92066651Y-107573100D01* +X92159881Y-107573100D01* +X92218072Y-107592007D01* +X92254036Y-107641507D01* +X92254036Y-107702693D01* +X92229885Y-107742102D01* +X90521953Y-109450035D01* +X90521953Y-109450036D01* +X90521952Y-109450035D01* +X90451485Y-109520503D01* +X90413350Y-109612571D01* +X90413350Y-116883428D01* +X90451485Y-116975496D01* +X90451486Y-116975497D01* +X90778685Y-117302695D01* +X90778686Y-117302697D01* +X90849153Y-117373164D01* +X90887290Y-117388960D01* +X90912095Y-117399235D01* +X90941220Y-117411300D01* +X90941223Y-117411301D01* +X90941226Y-117411301D01* +X91052401Y-117411301D01* +X91052409Y-117411300D01* +X98466279Y-117411300D01* +X98523925Y-117387422D01* +X98558347Y-117373164D01* +X98760327Y-117171181D01* +X98814841Y-117143405D01* +X98875272Y-117152975D01* +X98887052Y-117158978D01* +X98949635Y-117168889D01* +X98979371Y-117173600D01* +X98979374Y-117173600D01* +X99528929Y-117173600D01* +X99558664Y-117168889D01* +X99621248Y-117158978D01* +X99633019Y-117152979D01* +X99693451Y-117143405D01* +X99747969Y-117171180D01* +X99747973Y-117171183D01* +X100046085Y-117469295D01* +X100046086Y-117469297D01* +X100116553Y-117539764D01* +X100154690Y-117555560D01* +X100182964Y-117567272D01* +X100208620Y-117577900D01* +X100208623Y-117577901D01* +X100208626Y-117577901D01* +X100319801Y-117577901D01* +X100319809Y-117577900D01* +X106800179Y-117577900D01* +X106879355Y-117545104D01* +X106892247Y-117539764D01* +X110844114Y-113587895D01* +X110898631Y-113560119D01* +X110914118Y-113558900D01* +X111028657Y-113558900D01* +X111028659Y-113558900D01* +X111143236Y-113528199D01* +X111143238Y-113528197D01* +X111143240Y-113528197D01* +X111245958Y-113468892D01* +X111245958Y-113468891D01* +X111245963Y-113468889D01* +X111329839Y-113385013D01* +X111344532Y-113359564D01* +X111389147Y-113282290D01* +X111389147Y-113282288D01* +X111389149Y-113282286D01* +X111419850Y-113167709D01* +X111419850Y-113049091D01* +X111419850Y-113047600D01* +X111438757Y-112989409D01* +X111488257Y-112953445D01* +X111518850Y-112948600D01* +X111974907Y-112948600D01* +X111974910Y-112948600D01* +X112043043Y-112938673D01* +X112148133Y-112887298D01* +X112230848Y-112804583D01* +X112282223Y-112699493D01* +X112286805Y-112668047D01* +X112288222Y-112658325D01* +X112315322Y-112603469D01* +X112369490Y-112575018D01* +X112386187Y-112573600D01* +X113447113Y-112573600D01* +X113505304Y-112592507D01* +X113541268Y-112642007D01* +X113545078Y-112658325D01* +X113551076Y-112699492D01* +X113591561Y-112782305D01* +X113602452Y-112804583D01* +X113685167Y-112887298D01* +X113738935Y-112913583D01* +X113790254Y-112938672D01* +X113790255Y-112938672D01* +X113790257Y-112938673D01* +X113858390Y-112948600D01* +X113858393Y-112948600D01* +X114321882Y-112948600D01* +X114380073Y-112967507D01* +X114391885Y-112977596D01* +X114651339Y-113237049D01* +X114651342Y-113237053D01* +X114651343Y-113237053D01* +X114656985Y-113242695D01* +X114656986Y-113242697D01* +X114727453Y-113313164D01* +X114727454Y-113313164D01* +X114727455Y-113313165D01* +X114819521Y-113351300D01* +X114819522Y-113351300D01* +X123363779Y-113351300D01* +X123409812Y-113332232D01* +X123455847Y-113313164D01* +X123791413Y-112977596D01* +X123845930Y-112949819D01* +X123861417Y-112948600D01* +X124114380Y-112948600D01* +X124172571Y-112967507D01* +X124208535Y-113017007D01* +X124208535Y-113078193D01* +X124184384Y-113117604D01* +X123349753Y-113952236D01* +X123349752Y-113952235D01* +X123279285Y-114022703D01* +X123241150Y-114114771D01* +X123241150Y-117541066D01* +X123222243Y-117599257D01* +X123190137Y-117624569D01* +X123191036Y-117625915D01* +X123133148Y-117664594D01* +X123133144Y-117664598D01* +X123099884Y-117714375D01* +X123099882Y-117714379D01* +X123091150Y-117758272D01* +X123091150Y-118087927D01* +X123099882Y-118131820D01* +X123099884Y-118131824D01* +X123109022Y-118145500D01* +X123133146Y-118181604D01* +X123182928Y-118214867D01* +X123193977Y-118217064D01* +X123226822Y-118223599D01* +X123226828Y-118223599D01* +X123226830Y-118223600D01* +X123496181Y-118223600D01* +X123518228Y-118230763D01* +X123541126Y-118234390D01* +X123546774Y-118240038D01* +X123554372Y-118242507D01* +X123567999Y-118261263D01* +X123584391Y-118277655D01* +X123585640Y-118285544D01* +X123590336Y-118292007D01* +X123590336Y-118315192D01* +X123593962Y-118338087D01* +X123590336Y-118345203D01* +X123590336Y-118353193D01* +X123566185Y-118392604D01* +X123565185Y-118393604D01* +X123510668Y-118421381D01* +X123495181Y-118422600D01* +X123226822Y-118422600D01* +X123182929Y-118431332D01* +X123182925Y-118431334D01* +X123133148Y-118464594D01* +X123133144Y-118464598D01* +X123099884Y-118514375D01* +X123099882Y-118514379D01* +X123091150Y-118558272D01* +X123091150Y-118887921D01* +X123099882Y-118931820D01* +X123099884Y-118931824D01* +X123111094Y-118948601D01* +X123133146Y-118981604D01* +X123182928Y-119014867D01* +X123190449Y-119016363D01* +X123226822Y-119023599D01* +X123226828Y-119023599D01* +X123226830Y-119023600D01* +X123226831Y-119023600D01* +X123756469Y-119023600D01* +X123756470Y-119023600D01* +X123756471Y-119023599D01* +X123756477Y-119023599D01* +X123778273Y-119019262D01* +X123800372Y-119014867D01* +X123850154Y-118981604D01* +X123883417Y-118931822D01* +X123890628Y-118895573D01* +X123893100Y-118883148D01* +X123894855Y-118883497D01* +X123916444Y-118834137D01* +X123969229Y-118803195D01* +X124030120Y-118809190D01* +X124075858Y-118849830D01* +X124089450Y-118899894D01* +X124089450Y-121788331D01* +X124070543Y-121846522D01* +X124060454Y-121858334D01* +X117649753Y-128269035D01* +X117649753Y-128269036D01* +X117649752Y-128269035D01* +X117579285Y-128339503D01* +X117541150Y-128431571D01* +X117541150Y-128591896D01* +X117522243Y-128650087D01* +X117480036Y-128683360D01* +X117341420Y-128740777D01* +X117341411Y-128740781D01* +X117185742Y-128844798D01* +X117185738Y-128844801D01* +X117053351Y-128977188D01* +X117053348Y-128977192D01* +X116949331Y-129132861D01* +X116949327Y-129132870D01* +X116877676Y-129305850D01* +X116841150Y-129489481D01* +X116841150Y-129676718D01* +X116877676Y-129860349D01* +X116949327Y-130033329D01* +X116949331Y-130033338D01* +X117023715Y-130144659D01* +X117053348Y-130189008D01* +X117185742Y-130321402D01* +X117252113Y-130365749D01* +X117341411Y-130425418D01* +X117341417Y-130425420D01* +X117341419Y-130425422D01* +X117514399Y-130497073D01* +X117698034Y-130533600D01* +X117698035Y-130533600D01* +X117885265Y-130533600D01* +X117885266Y-130533600D01* +X118068901Y-130497073D01* +X118241881Y-130425422D01* +X118241884Y-130425419D01* +X118241888Y-130425418D01* +X118286837Y-130395382D01* +X118397558Y-130321402D01* +X118529952Y-130189008D01* +X118629525Y-130039987D01* +X118633968Y-130033338D01* +X118633969Y-130033334D01* +X118633972Y-130033331D01* +X118705623Y-129860351D01* +X118742150Y-129676716D01* +X118742150Y-129489484D01* +X118742149Y-129489481D01* +X119381150Y-129489481D01* +X119381150Y-129676718D01* +X119417676Y-129860349D01* +X119489327Y-130033329D01* +X119489331Y-130033338D01* +X119563715Y-130144659D01* +X119593348Y-130189008D01* +X119725742Y-130321402D01* +X119792113Y-130365749D01* +X119881411Y-130425418D01* +X119881417Y-130425420D01* +X119881419Y-130425422D01* +X120054399Y-130497073D01* +X120238034Y-130533600D01* +X120238035Y-130533600D01* +X120425265Y-130533600D01* +X120425266Y-130533600D01* +X120608901Y-130497073D01* +X120781881Y-130425422D01* +X120781884Y-130425419D01* +X120781888Y-130425418D01* +X120826837Y-130395382D01* +X120937558Y-130321402D01* +X121069952Y-130189008D01* +X121169525Y-130039987D01* +X121173968Y-130033338D01* +X121173969Y-130033334D01* +X121173972Y-130033331D01* +X121245623Y-129860351D01* +X121282150Y-129676716D01* +X121282150Y-129489484D01* +X121282149Y-129489481D01* +X121921150Y-129489481D01* +X121921150Y-129676718D01* +X121957676Y-129860349D01* +X122029327Y-130033329D01* +X122029331Y-130033338D01* +X122103715Y-130144659D01* +X122133348Y-130189008D01* +X122265742Y-130321402D01* +X122332113Y-130365749D01* +X122421411Y-130425418D01* +X122421417Y-130425420D01* +X122421419Y-130425422D01* +X122594399Y-130497073D01* +X122778034Y-130533600D01* +X122778035Y-130533600D01* +X122965265Y-130533600D01* +X122965266Y-130533600D01* +X123148901Y-130497073D01* +X123321881Y-130425422D01* +X123321884Y-130425419D01* +X123321888Y-130425418D01* +X123366837Y-130395382D01* +X123477558Y-130321402D01* +X123609952Y-130189008D01* +X123709525Y-130039987D01* +X123713968Y-130033338D01* +X123713969Y-130033334D01* +X123713972Y-130033331D01* +X123785623Y-129860351D01* +X123822150Y-129676716D01* +X123822150Y-129489484D01* +X123785623Y-129305849D01* +X123713972Y-129132869D01* +X123713970Y-129132867D01* +X123713968Y-129132861D01* +X123641560Y-129024497D01* +X123609952Y-128977192D01* +X123477558Y-128844798D01* +X123433209Y-128815165D01* +X123321888Y-128740781D01* +X123321879Y-128740777D01* +X123148899Y-128669126D01* +X122965268Y-128632600D01* +X122965266Y-128632600D01* +X122778034Y-128632600D01* +X122778031Y-128632600D01* +X122594400Y-128669126D01* +X122421420Y-128740777D01* +X122421411Y-128740781D01* +X122265742Y-128844798D01* +X122265738Y-128844801D01* +X122133351Y-128977188D01* +X122133348Y-128977192D01* +X122029331Y-129132861D01* +X122029327Y-129132870D01* +X121957676Y-129305850D01* +X121921150Y-129489481D01* +X121282149Y-129489481D01* +X121245623Y-129305849D01* +X121173972Y-129132869D01* +X121173970Y-129132867D01* +X121173968Y-129132861D01* +X121101560Y-129024497D01* +X121069952Y-128977192D01* +X120937558Y-128844798D01* +X120893209Y-128815165D01* +X120781888Y-128740781D01* +X120781879Y-128740777D01* +X120608899Y-128669126D01* +X120425268Y-128632600D01* +X120425266Y-128632600D01* +X120238034Y-128632600D01* +X120238031Y-128632600D01* +X120054400Y-128669126D01* +X119881420Y-128740777D01* +X119881411Y-128740781D01* +X119725742Y-128844798D01* +X119725738Y-128844801D01* +X119593351Y-128977188D01* +X119593348Y-128977192D01* +X119489331Y-129132861D01* +X119489327Y-129132870D01* +X119417676Y-129305850D01* +X119381150Y-129489481D01* +X118742149Y-129489481D01* +X118705623Y-129305849D01* +X118633972Y-129132869D01* +X118633970Y-129132867D01* +X118633968Y-129132861D01* +X118561560Y-129024497D01* +X118529952Y-128977192D01* +X118397558Y-128844798D01* +X118353209Y-128815165D01* +X118241888Y-128740781D01* +X118241879Y-128740777D01* +X118127497Y-128693398D01* +X118080971Y-128653661D01* +X118066688Y-128594166D01* +X118090103Y-128537638D01* +X118095366Y-128531943D01* +X124481845Y-122145464D01* +X124481847Y-122145464D01* +X124552314Y-122074997D01* +X124588273Y-121988184D01* +X124590451Y-121982927D01* +X124590451Y-121883272D01* +X124590450Y-121883269D01* +X124590450Y-119122600D01* +X124609357Y-119064409D01* +X124658857Y-119028445D01* +X124689450Y-119023600D01* +X125156469Y-119023600D01* +X125156470Y-119023600D01* +X125156471Y-119023599D01* +X125156477Y-119023599D01* +X125178273Y-119019262D01* +X125200372Y-119014867D01* +X125237162Y-118990285D01* +X125292164Y-118973600D01* +X125298581Y-118973600D01* +X125356772Y-118992507D01* +X125368585Y-119002596D01* +X125833086Y-119467097D01* +X125833085Y-119467097D01* +X125903553Y-119537564D01* +X125995621Y-119575700D01* +X125995622Y-119575700D01* +X129920479Y-119575700D01* +X129966512Y-119556632D01* +X130012547Y-119537564D01* +X130333545Y-119216564D01* +X130333547Y-119216564D01* +X130404014Y-119146097D01* +X130431754Y-119079127D01* +X130442151Y-119054027D01* +X130442151Y-118954372D01* +X130442150Y-118954369D01* +X130442150Y-118907151D01* +X130461057Y-118848960D01* +X130510557Y-118812996D01* +X130571743Y-118812996D01* +X130579036Y-118815687D01* +X130620780Y-118832977D01* +X130620785Y-118832979D01* +X130735638Y-118848099D01* +X130849150Y-118848099D01* +X130849150Y-118672600D01* +X130868057Y-118614409D01* +X130917557Y-118578445D01* +X130921122Y-118577361D01* +X130934375Y-118573600D01* +X130953978Y-118573600D01* +X130996630Y-118555932D01* +X131002169Y-118554361D01* +X131008997Y-118554618D01* +X131029197Y-118550600D01* +X131100150Y-118550600D01* +X131158341Y-118569507D01* +X131194305Y-118619007D01* +X131199150Y-118649600D01* +X131199150Y-118848098D01* +X131199151Y-118848099D01* +X131312658Y-118848099D01* +X131312663Y-118848098D01* +X131427516Y-118832979D01* +X131427517Y-118832978D01* +X131570432Y-118773782D01* +X131693157Y-118679611D01* +X131693161Y-118679607D01* +X131787332Y-118556882D01* +X131846528Y-118413968D01* +X131846529Y-118413968D01* +X131855200Y-118348099D01* +X131852963Y-118345548D01* +X131802626Y-118329193D01* +X131766662Y-118279693D01* +X131766662Y-118218507D01* +X131790813Y-118179097D01* +X131907752Y-118062158D01* +X132283545Y-117686364D01* +X132283547Y-117686364D01* +X132354014Y-117615897D01* +X132392150Y-117523828D01* +X132392150Y-113496700D01* +X132411057Y-113438509D01* +X132460557Y-113402545D01* +X132491150Y-113397700D01* +X135367379Y-113397700D01* +X135413412Y-113378632D01* +X135459447Y-113359564D01* +X135841413Y-112977596D01* +X135895930Y-112949819D01* +X135911417Y-112948600D01* +X136402282Y-112948600D01* +X136402286Y-112948600D01* +X136475275Y-112937966D01* +X136587861Y-112882926D01* +X136637876Y-112832910D01* +X136692390Y-112805134D01* +X136752822Y-112814705D01* +X136796087Y-112857969D01* +X136801853Y-112871775D01* +X136805104Y-112881587D01* +X136894075Y-113025829D01* +X137013920Y-113145674D01* +X137158162Y-113234645D01* +X137319046Y-113287956D01* +X137418326Y-113298099D01* +X137441650Y-113298098D01* +X137441650Y-112573101D01* +X137941650Y-112573101D01* +X137941650Y-113298098D01* +X137941651Y-113298099D01* +X137964972Y-113298099D01* +X138064247Y-113287957D01* +X138064259Y-113287954D01* +X138225137Y-113234645D01* +X138369379Y-113145674D01* +X138489224Y-113025829D01* +X138578195Y-112881587D01* +X138631506Y-112720703D01* +X138641650Y-112621423D01* +X138641650Y-112573101D01* +X138641649Y-112573100D01* +X137941651Y-112573100D01* +X137941650Y-112573101D01* +X137441650Y-112573101D01* +X137441650Y-111348101D01* +X137941650Y-111348101D01* +X137941650Y-112073099D01* +X137941651Y-112073100D01* +X138641648Y-112073100D01* +X138641649Y-112073099D01* +X138641649Y-112024777D01* +X138631507Y-111925502D01* +X138631504Y-111925490D01* +X138578195Y-111764612D01* +X138489224Y-111620370D01* +X138369379Y-111500525D01* +X138225137Y-111411554D01* +X138064253Y-111358243D01* +X137964973Y-111348100D01* +X137941651Y-111348100D01* +X137941650Y-111348101D01* +X137441650Y-111348101D01* +X137441650Y-111348100D01* +X137441649Y-111348099D01* +X137418339Y-111348100D01* +X137418334Y-111348101D01* +X137319051Y-111358242D01* +X137319040Y-111358245D01* +X137158162Y-111411554D01* +X137013920Y-111500525D01* +X136894075Y-111620370D01* +X136805103Y-111764613D01* +X136805103Y-111764614D01* +X136801852Y-111774426D01* +X136765600Y-111823715D01* +X136707300Y-111842282D01* +X136649220Y-111823035D01* +X136637881Y-111813294D01* +X136587861Y-111763274D01* +X136556613Y-111747998D01* +X136475275Y-111708234D01* +X136475276Y-111708234D01* +X136450497Y-111704624D01* +X136402286Y-111697600D01* +X135881014Y-111697600D01* +X135837220Y-111703980D01* +X135808023Y-111708234D01* +X135695440Y-111763273D01* +X135606823Y-111851890D01* +X135551784Y-111964473D01* +X135548375Y-111987872D01* +X135542812Y-112026061D01* +X135541150Y-112037467D01* +X135541150Y-112528331D01* +X135522243Y-112586522D01* +X135512154Y-112598335D01* +X135242785Y-112867704D01* +X135188268Y-112895481D01* +X135172781Y-112896700D01* +X134710286Y-112896700D01* +X134652095Y-112877793D01* +X134616131Y-112828293D01* +X134616131Y-112767107D01* +X134616311Y-112766559D01* +X134631506Y-112720701D01* +X134641650Y-112621423D01* +X134641650Y-112573101D01* +X134641649Y-112573100D01* +X133941651Y-112573100D01* +X133941650Y-112573101D01* +X133941650Y-112797700D01* +X133922743Y-112855891D01* +X133873243Y-112891855D01* +X133842650Y-112896700D01* +X133540650Y-112896700D01* +X133482459Y-112877793D01* +X133446495Y-112828293D01* +X133441650Y-112797700D01* +X133441650Y-111348101D01* +X133941650Y-111348101D01* +X133941650Y-112073099D01* +X133941651Y-112073100D01* +X134641648Y-112073100D01* +X134641649Y-112073099D01* +X134641649Y-112024777D01* +X134631507Y-111925502D01* +X134631504Y-111925490D01* +X134578195Y-111764612D01* +X134489224Y-111620370D01* +X134369379Y-111500525D01* +X134225137Y-111411554D01* +X134064253Y-111358243D01* +X133964973Y-111348100D01* +X133941651Y-111348100D01* +X133941650Y-111348101D01* +X133441650Y-111348101D01* +X133441650Y-111348100D01* +X133441649Y-111348099D01* +X133418339Y-111348100D01* +X133418334Y-111348101D01* +X133319051Y-111358242D01* +X133319040Y-111358245D01* +X133158162Y-111411554D01* +X133013920Y-111500525D01* +X132894075Y-111620370D01* +X132805103Y-111764613D01* +X132805103Y-111764614D01* +X132801852Y-111774426D01* +X132765600Y-111823715D01* +X132707300Y-111842282D01* +X132649220Y-111823035D01* +X132648838Y-111822753D01* +X132643010Y-111818423D01* +X132587861Y-111763274D01* +X132532060Y-111735994D01* +X132524717Y-111730539D01* +X132512036Y-111712689D01* +X132496302Y-111697467D01* +X132494689Y-111688270D01* +X132489282Y-111680659D01* +X132489514Y-111658766D01* +X132485733Y-111637201D01* +X132489848Y-111627411D01* +X132489933Y-111619477D01* +X132497421Y-111609397D01* +X132500741Y-111601499D01* +X132498895Y-111600433D01* +X132561447Y-111492090D01* +X132561447Y-111492088D01* +X132561449Y-111492086D01* +X132592150Y-111377509D01* +X132592150Y-111258891D01* +X132561449Y-111144314D01* +X132561447Y-111144311D01* +X132561447Y-111144309D01* +X132502142Y-111041591D01* +X132502140Y-111041589D01* +X132502139Y-111041587D01* +X132418263Y-110957711D01* +X132418260Y-110957709D01* +X132418258Y-110957707D01* +X132315539Y-110898402D01* +X132315540Y-110898402D01* +X132302001Y-110894774D01* +X132200959Y-110867700D01* +X132082341Y-110867700D01* +X132082333Y-110867700D01* +X132081428Y-110867819D01* +X132080524Y-110867700D01* +X132075852Y-110867700D01* +X132075852Y-110867084D01* +X132030631Y-110861129D01* +X131952580Y-110828800D01* +X131952578Y-110828800D01* +X125143278Y-110828800D01* +X125043622Y-110828800D01* +X125043621Y-110828800D01* +X124951555Y-110866934D01* +X124149885Y-111668604D01* +X124095368Y-111696381D01* +X124079881Y-111697600D01* +X123858390Y-111697600D01* +X123825247Y-111702429D01* +X123790254Y-111707527D01* +X123685168Y-111758901D01* +X123602451Y-111841618D01* +X123551077Y-111946704D01* +X123548488Y-111964473D01* +X123541151Y-112014837D01* +X123541150Y-112014843D01* +X123541150Y-112478331D01* +X123522243Y-112536522D01* +X123512154Y-112548335D01* +X123239185Y-112821304D01* +X123184668Y-112849081D01* +X123169181Y-112850300D01* +X120725662Y-112850300D01* +X120667471Y-112831393D01* +X120631507Y-112781893D01* +X120631507Y-112726231D01* +X120630375Y-112725989D01* +X120631506Y-112720703D01* +X120641650Y-112621423D01* +X120641650Y-112573101D01* +X120641649Y-112573100D01* +X119941651Y-112573100D01* +X119941650Y-112573101D01* +X119941650Y-112751300D01* +X119922743Y-112809491D01* +X119873243Y-112845455D01* +X119842650Y-112850300D01* +X119540650Y-112850300D01* +X119482459Y-112831393D01* +X119446495Y-112781893D01* +X119441650Y-112751300D01* +X119441650Y-111418368D01* +X119444118Y-111410770D01* +X119442869Y-111402881D01* +X119453393Y-111382225D01* +X119460557Y-111360177D01* +X119470646Y-111348364D01* +X119470909Y-111348101D01* +X119941650Y-111348101D01* +X119941650Y-112073099D01* +X119941651Y-112073100D01* +X120641648Y-112073100D01* +X120641649Y-112073099D01* +X120641649Y-112024777D01* +X120631507Y-111925502D01* +X120631504Y-111925490D01* +X120578195Y-111764612D01* +X120489224Y-111620370D01* +X120369379Y-111500525D01* +X120225137Y-111411554D01* +X120064253Y-111358243D01* +X119964973Y-111348100D01* +X119941651Y-111348100D01* +X119941650Y-111348101D01* +X119470909Y-111348101D01* +X121790314Y-109028696D01* +X121844831Y-109000919D01* +X121860318Y-108999700D01* +X163971641Y-108999700D01* +X164029832Y-109018607D01* +X164041638Y-109028690D01* +X164122637Y-109109689D01* +X164122639Y-109109690D01* +X164122641Y-109109692D01* +X164225360Y-109168997D01* +X164225361Y-109168997D01* +X164225364Y-109168999D01* +X164339941Y-109199700D01* +X164339943Y-109199700D01* +X164458557Y-109199700D01* +X164458559Y-109199700D01* +X164573136Y-109168999D01* +X164573138Y-109168997D01* +X164573140Y-109168997D01* +X164675858Y-109109692D01* +X164675858Y-109109691D01* +X164675863Y-109109689D01* +X164759739Y-109025813D01* +X164762711Y-109020666D01* +X164819047Y-108923090D01* +X164819047Y-108923088D01* +X164819049Y-108923086D01* +X164849750Y-108808509D01* +X164849750Y-108689891D01* +X164819049Y-108575314D01* +X164819047Y-108575311D01* +X164819047Y-108575309D01* +X164756495Y-108466967D01* +X164758729Y-108465676D01* +X164741986Y-108418387D01* +X164759366Y-108359722D01* +X164807910Y-108322477D01* +X164840952Y-108316800D01* +X167135441Y-108316800D01* +X167135442Y-108316800D01* +X167309416Y-108282195D01* +X167391356Y-108248253D01* +X167473297Y-108214313D01* +X167496494Y-108198813D01* +X167588555Y-108137300D01* +X167588556Y-108137299D01* +X167620786Y-108115764D01* +X167762859Y-107973691D01* +X173496450Y-107973691D01* +X173496450Y-108092309D01* +X173510598Y-108145109D01* +X173527152Y-108206890D01* +X173586457Y-108309608D01* +X173586459Y-108309610D01* +X173586461Y-108309613D01* +X173670337Y-108393489D01* +X173670339Y-108393490D01* +X173670341Y-108393492D01* +X173773060Y-108452797D01* +X173773061Y-108452797D01* +X173773064Y-108452799D01* +X173887641Y-108483500D01* +X173887643Y-108483500D01* +X174006257Y-108483500D01* +X174006259Y-108483500D01* +X174120836Y-108452799D01* +X174120838Y-108452797D01* +X174120840Y-108452797D01* +X174223558Y-108393492D01* +X174223558Y-108393491D01* +X174223563Y-108393489D01* +X174307439Y-108309613D01* +X174314087Y-108298098D01* +X174366747Y-108206890D01* +X174366747Y-108206888D01* +X174366749Y-108206886D01* +X174397450Y-108092309D01* +X174397450Y-107973691D01* +X174366749Y-107859114D01* +X174366747Y-107859111D01* +X174366747Y-107859109D01* +X174307442Y-107756391D01* +X174307440Y-107756389D01* +X174307439Y-107756387D01* +X174223563Y-107672511D01* +X174223560Y-107672509D01* +X174223558Y-107672507D01* +X174120839Y-107613202D01* +X174120840Y-107613202D01* +X174085538Y-107603743D01* +X174006259Y-107582500D01* +X173887641Y-107582500D01* +X173830560Y-107597795D01* +X173773059Y-107613202D01* +X173670341Y-107672507D01* +X173586457Y-107756391D01* +X173527152Y-107859109D01* +X173516963Y-107897135D01* +X173496450Y-107973691D01* +X167762859Y-107973691D01* +X168369758Y-107366791D01* +X176918650Y-107366791D01* +X176918650Y-107485409D01* +X176934245Y-107543609D01* +X176949352Y-107599990D01* +X177008657Y-107702708D01* +X177008659Y-107702710D01* +X177008661Y-107702713D01* +X177092537Y-107786589D01* +X177092539Y-107786590D01* +X177092541Y-107786592D01* +X177195260Y-107845897D01* +X177195261Y-107845897D01* +X177195264Y-107845899D01* +X177309841Y-107876600D01* +X177309843Y-107876600D01* +X177428457Y-107876600D01* +X177428459Y-107876600D01* +X177543036Y-107845899D01* +X177543038Y-107845897D01* +X177543040Y-107845897D01* +X177645758Y-107786592D01* +X177645758Y-107786591D01* +X177645763Y-107786589D01* +X177729639Y-107702713D01* +X177731498Y-107699493D01* +X177788947Y-107599990D01* +X177788947Y-107599988D01* +X177788949Y-107599986D01* +X177819650Y-107485409D01* +X177819650Y-107366791D01* +X177788949Y-107252214D01* +X177788947Y-107252211D01* +X177788947Y-107252209D01* +X177729642Y-107149491D01* +X177729640Y-107149489D01* +X177729639Y-107149487D01* +X177645763Y-107065611D01* +X177645760Y-107065609D01* +X177645758Y-107065607D01* +X177557827Y-107014840D01* +X178141150Y-107014840D01* +X178141150Y-107631360D01* +X178147145Y-107672507D01* +X178151077Y-107699495D01* +X178188873Y-107776807D01* +X178202452Y-107804583D01* +X178285167Y-107887298D01* +X178338935Y-107913583D01* +X178390254Y-107938672D01* +X178390255Y-107938672D01* +X178390257Y-107938673D01* +X178458390Y-107948600D01* +X178458393Y-107948600D01* +X178921881Y-107948600D01* +X178980072Y-107967507D01* +X178991885Y-107977596D01* +X180724953Y-109710664D01* +X180724954Y-109710664D01* +X180724955Y-109710665D01* +X180817021Y-109748800D01* +X180817022Y-109748800D01* +X180916677Y-109748800D01* +X181046741Y-109748800D01* +X181104932Y-109767707D01* +X181116738Y-109777790D01* +X181197737Y-109858789D01* +X181197739Y-109858790D01* +X181197741Y-109858792D01* +X181300460Y-109918097D01* +X181300461Y-109918097D01* +X181300464Y-109918099D01* +X181415041Y-109948800D01* +X181415043Y-109948800D01* +X181533657Y-109948800D01* +X181533659Y-109948800D01* +X181648236Y-109918099D01* +X181648238Y-109918097D01* +X181648240Y-109918097D01* +X181750958Y-109858792D01* +X181750958Y-109858791D01* +X181750963Y-109858789D01* +X181834839Y-109774913D01* +X181834842Y-109774908D01* +X181894147Y-109672190D01* +X181894147Y-109672188D01* +X181894149Y-109672186D01* +X181924850Y-109557609D01* +X181924850Y-109438991D01* +X181894149Y-109324414D01* +X181894147Y-109324411D01* +X181894147Y-109324409D01* +X181834842Y-109221691D01* +X181834840Y-109221689D01* +X181834839Y-109221687D01* +X181750963Y-109137811D01* +X181750960Y-109137809D01* +X181750958Y-109137807D01* +X181648239Y-109078502D01* +X181648240Y-109078502D01* +X181634701Y-109074874D01* +X181533659Y-109047800D01* +X181415041Y-109047800D01* +X181344917Y-109066589D01* +X181300459Y-109078502D01* +X181197741Y-109137807D01* +X181197740Y-109137808D01* +X181197737Y-109137810D01* +X181197737Y-109137811D01* +X181116742Y-109218805D01* +X181109627Y-109222430D01* +X181104932Y-109228893D01* +X181082883Y-109236056D01* +X181062228Y-109246581D01* +X181046741Y-109247800D01* +X181011619Y-109247800D01* +X180953428Y-109228893D01* +X180941615Y-109218804D01* +X180120646Y-108397835D01* +X180092869Y-108343318D01* +X180091650Y-108327831D01* +X180091650Y-107573101D01* +X180591650Y-107573101D01* +X180591650Y-108298098D01* +X180591651Y-108298099D01* +X180598216Y-108298099D01* +X180598232Y-108298098D01* +X180668753Y-108291691D01* +X180668759Y-108291689D01* +X180831042Y-108241120D01* +X180831050Y-108241117D01* +X180976522Y-108153175D01* +X181096725Y-108032972D01* +X181184667Y-107887500D01* +X181184670Y-107887492D01* +X181235239Y-107725210D01* +X181235241Y-107725204D01* +X181241649Y-107654681D01* +X181241650Y-107654668D01* +X181241650Y-107573101D01* +X181241649Y-107573100D01* +X180591651Y-107573100D01* +X180591650Y-107573101D01* +X180091650Y-107573101D01* +X180091649Y-107573100D01* +X179441650Y-107573100D01* +X179438783Y-107575967D01* +X179384266Y-107603743D01* +X179323835Y-107594171D01* +X179298777Y-107575966D01* +X179271146Y-107548335D01* +X179243369Y-107493818D01* +X179242150Y-107478331D01* +X179242150Y-107014841D01* +X179242150Y-107014840D01* +X179238752Y-106991518D01* +X179441650Y-106991518D01* +X179441650Y-107073099D01* +X179441651Y-107073100D01* +X180091649Y-107073100D01* +X180091650Y-107073099D01* +X180091650Y-106348101D01* +X180091648Y-106348099D01* +X180085075Y-106348100D01* +X180014546Y-106354508D01* +X180014540Y-106354510D01* +X179852257Y-106405079D01* +X179852249Y-106405082D01* +X179706777Y-106493024D01* +X179586574Y-106613227D01* +X179498632Y-106758699D01* +X179498629Y-106758707D01* +X179448060Y-106920989D01* +X179448058Y-106920995D01* +X179441650Y-106991518D01* +X179238752Y-106991518D01* +X179232223Y-106946707D01* +X179219650Y-106920989D01* +X179190267Y-106860885D01* +X179180848Y-106841617D01* +X179098133Y-106758902D01* +X179059129Y-106739834D01* +X178993045Y-106707527D01* +X178965789Y-106703556D01* +X178924910Y-106697600D01* +X178458390Y-106697600D01* +X178428301Y-106701984D01* +X178390254Y-106707527D01* +X178285168Y-106758901D01* +X178202451Y-106841618D01* +X178151077Y-106946704D01* +X178151077Y-106946707D01* +X178141150Y-107014840D01* +X177557827Y-107014840D01* +X177543039Y-107006302D01* +X177543040Y-107006302D01* +X177487865Y-106991518D01* +X177428459Y-106975600D01* +X177309841Y-106975600D01* +X177250435Y-106991518D01* +X177195259Y-107006302D01* +X177092541Y-107065607D01* +X177008657Y-107149491D01* +X176949352Y-107252209D01* +X176945389Y-107267000D01* +X176918650Y-107366791D01* +X168369758Y-107366791D01* +X169983953Y-105752595D01* +X170038470Y-105724819D01* +X170053957Y-105723600D01* +X170342150Y-105723600D01* +X170400341Y-105742507D01* +X170436305Y-105792007D01* +X170441150Y-105822600D01* +X170441150Y-106437927D01* +X170449882Y-106481820D01* +X170449884Y-106481824D01* +X170482510Y-106530652D01* +X170483146Y-106531604D01* +X170532928Y-106564867D01* +X170543977Y-106567064D01* +X170576822Y-106573599D01* +X170576828Y-106573599D01* +X170576830Y-106573600D01* +X170576831Y-106573600D01* +X172606469Y-106573600D01* +X172606470Y-106573600D01* +X172606471Y-106573599D01* +X172606477Y-106573599D01* +X172628273Y-106569262D01* +X172650372Y-106564867D01* +X172700154Y-106531604D01* +X172733417Y-106481822D01* +X172742150Y-106437920D01* +X172742150Y-105822600D01* +X172761057Y-105764409D01* +X172810557Y-105728445D01* +X172841150Y-105723600D01* +X173632040Y-105723600D01* +X173632041Y-105723600D01* +X173806016Y-105688994D01* +X173969897Y-105621113D01* +X174117385Y-105522564D01* +X174242814Y-105397135D01* +X174341363Y-105249647D01* +X174409244Y-105085766D01* +X174443850Y-104911791D01* +X174444799Y-104907021D01* +X174446821Y-104907423D01* +X174468029Y-104858869D01* +X174472048Y-104854601D01* +X175253251Y-104073397D01* +X175307766Y-104045622D01* +X175368198Y-104055193D01* +X175411463Y-104098458D01* +X175420350Y-104124088D01* +X175441246Y-104229133D01* +X175441250Y-104229147D01* +X175490284Y-104347525D01* +X175490288Y-104347533D01* +X175527814Y-104403693D01* +X175561474Y-104454069D01* +X175652081Y-104544676D01* +X175713574Y-104585764D01* +X175758616Y-104615861D01* +X175758620Y-104615863D01* +X175758623Y-104615865D01* +X175877006Y-104664901D01* +X176002681Y-104689900D01* +X178627581Y-104689900D01* +X178755719Y-104689900D01* +X179032596Y-104689900D01* +X179090787Y-104708807D01* +X179102600Y-104718896D01* +X180591723Y-106208019D01* +X180619500Y-106262536D01* +X180609929Y-106322968D01* +X180591724Y-106348025D01* +X180591650Y-106348099D01* +X180591650Y-107073099D01* +X180591651Y-107073100D01* +X181241648Y-107073100D01* +X181253129Y-107061618D01* +X181260556Y-107038761D01* +X181310056Y-107002797D01* +X181371242Y-107002797D01* +X181410650Y-107026946D01* +X185921681Y-111537977D01* +X185921684Y-111537979D01* +X186012125Y-111598409D01* +X186012124Y-111598409D01* +X186028220Y-111609164D01* +X186043121Y-111615336D01* +X186146606Y-111658201D01* +X186272281Y-111683200D01* +X186272282Y-111683200D01* +X189727418Y-111683200D01* +X189727419Y-111683200D01* +X189853094Y-111658201D01* +X189971477Y-111609165D01* +X189971477Y-111609164D01* +X189971479Y-111609164D01* +X189987575Y-111598409D01* +X190006693Y-111585635D01* +X190078019Y-111537977D01* +X191393900Y-110222096D01* +X191448417Y-110194319D01* +X191463904Y-110193100D01* +X193607340Y-110193100D01* +X193665531Y-110212007D01* +X193701495Y-110261507D01* +X193702409Y-110319720D01* +X193674551Y-110415606D01* +X193674549Y-110415613D01* +X193674354Y-110418100D01* +X195047650Y-110418100D01* +X195105841Y-110437007D01* +X195141805Y-110486507D01* +X195146650Y-110517100D01* +X195146650Y-110819100D01* +X195127743Y-110877291D01* +X195078243Y-110913255D01* +X195047650Y-110918100D01* +X193674354Y-110918100D01* +X193674549Y-110920586D01* +X193674551Y-110920593D01* +X193720369Y-111078300D01* +X193720369Y-111078301D01* +X193803964Y-111219652D01* +X193920097Y-111335785D01* +X194061448Y-111419380D01* +X194067165Y-111421854D01* +X194066339Y-111423762D01* +X194109334Y-111452980D01* +X194130062Y-111510547D01* +X194112994Y-111569304D01* +X194101115Y-111583663D01* +X194069445Y-111615333D01* +X194024064Y-111718111D01* +X194021150Y-111743230D01* +X194021150Y-112132960D01* +X194021151Y-112132963D01* +X194024064Y-112158090D01* +X194047476Y-112211112D01* +X194053684Y-112271982D01* +X194022928Y-112324875D01* +X193966956Y-112349589D01* +X193956911Y-112350100D01* +X181330867Y-112350100D01* +X181272676Y-112331193D01* +X181236712Y-112281693D01* +X181236410Y-112230778D01* +X181234219Y-112230343D01* +X181235241Y-112225204D01* +X181241649Y-112154681D01* +X181241650Y-112154668D01* +X181241650Y-112073101D01* +X181241649Y-112073100D01* +X179441650Y-112073100D01* +X179438783Y-112075967D01* +X179384266Y-112103743D01* +X179323835Y-112094171D01* +X179298777Y-112075966D01* +X179271146Y-112048335D01* +X179243369Y-111993818D01* +X179242150Y-111978331D01* +X179242150Y-111514841D01* +X179242150Y-111514840D01* +X179238752Y-111491518D01* +X179441650Y-111491518D01* +X179441650Y-111573099D01* +X179441651Y-111573100D01* +X180091649Y-111573100D01* +X180091650Y-111573099D01* +X180091650Y-110848101D01* +X180591650Y-110848101D01* +X180591650Y-111573099D01* +X180591651Y-111573100D01* +X181241648Y-111573100D01* +X181241649Y-111573099D01* +X181241649Y-111491533D01* +X181241648Y-111491517D01* +X181235241Y-111420996D01* +X181235239Y-111420990D01* +X181184670Y-111258707D01* +X181184667Y-111258699D01* +X181096725Y-111113227D01* +X180976522Y-110993024D01* +X180831050Y-110905082D01* +X180831042Y-110905079D01* +X180668760Y-110854510D01* +X180668754Y-110854508D01* +X180598231Y-110848100D01* +X180591651Y-110848100D01* +X180591650Y-110848101D01* +X180091650Y-110848101D01* +X180091648Y-110848099D01* +X180085075Y-110848100D01* +X180014546Y-110854508D01* +X180014540Y-110854510D01* +X179852257Y-110905079D01* +X179852249Y-110905082D01* +X179706777Y-110993024D01* +X179586574Y-111113227D01* +X179498632Y-111258699D01* +X179498629Y-111258707D01* +X179448060Y-111420989D01* +X179448058Y-111420995D01* +X179441650Y-111491518D01* +X179238752Y-111491518D01* +X179232223Y-111446707D01* +X179228038Y-111438147D01* +X179185856Y-111351862D01* +X179180848Y-111341617D01* +X179098133Y-111258902D01* +X179098113Y-111258892D01* +X178993045Y-111207527D01* +X178965789Y-111203556D01* +X178924910Y-111197600D01* +X178458390Y-111197600D01* +X178424323Y-111202563D01* +X178390254Y-111207527D01* +X178285168Y-111258901D01* +X178202451Y-111341618D01* +X178151077Y-111446704D01* +X178146113Y-111480773D01* +X178141150Y-111514840D01* +X178141150Y-112131360D01* +X178145045Y-112158090D01* +X178151077Y-112199495D01* +X178202451Y-112304581D01* +X178202452Y-112304583D01* +X178285167Y-112387298D01* +X178335265Y-112411789D01* +X178390254Y-112438672D01* +X178390255Y-112438672D01* +X178390257Y-112438673D01* +X178458390Y-112448600D01* +X178458393Y-112448600D01* +X178921881Y-112448600D01* +X178980072Y-112467507D01* +X178991884Y-112477596D01* +X179172085Y-112657796D01* +X179199863Y-112712313D01* +X179190292Y-112772745D01* +X179147027Y-112816010D01* +X179102082Y-112826800D01* +X171927304Y-112826800D01* +X171869113Y-112807893D01* +X171857301Y-112797804D01* +X171638118Y-112578622D01* +X171531576Y-112507434D01* +X171413197Y-112458400D01* +X171413195Y-112458399D01* +X171413194Y-112458399D01* +X171287519Y-112433400D01* +X141846781Y-112433400D01* +X141846780Y-112433400D01* +X141794649Y-112443770D01* +X141721106Y-112458399D01* +X141721105Y-112458399D01* +X141721102Y-112458400D01* +X141602723Y-112507434D01* +X141496183Y-112578621D01* +X125471200Y-128603604D01* +X125416683Y-128631381D01* +X125401196Y-128632600D01* +X125318031Y-128632600D01* +X125134400Y-128669126D01* +X124961420Y-128740777D01* +X124961411Y-128740781D01* +X124805742Y-128844798D01* +X124805738Y-128844801D01* +X124673351Y-128977188D01* +X124673348Y-128977192D01* +X124569331Y-129132861D01* +X124569327Y-129132870D01* +X124497676Y-129305850D01* +X124461150Y-129489481D01* +X124461150Y-129676718D01* +X124497676Y-129860349D01* +X124569327Y-130033329D01* +X124569331Y-130033338D01* +X124643715Y-130144659D01* +X124673348Y-130189008D01* +X124805742Y-130321402D01* +X124872113Y-130365749D01* +X124961411Y-130425418D01* +X124961417Y-130425420D01* +X124961419Y-130425422D01* +X125134399Y-130497073D01* +X125318034Y-130533600D01* +X125318035Y-130533600D01* +X125505265Y-130533600D01* +X125505266Y-130533600D01* +X125688901Y-130497073D01* +X125861881Y-130425422D01* +X125861884Y-130425419D01* +X125861888Y-130425418D01* +X125906837Y-130395382D01* +X126017558Y-130321402D01* +X126149952Y-130189008D01* +X126249525Y-130039987D01* +X126253968Y-130033338D01* +X126253969Y-130033334D01* +X126253972Y-130033331D01* +X126325623Y-129860351D01* +X126362150Y-129676716D01* +X126362150Y-129593552D01* +X126364618Y-129585954D01* +X126363369Y-129578065D01* +X126373893Y-129557409D01* +X126381057Y-129535361D01* +X126391134Y-129523561D01* +X126556269Y-129358426D01* +X126610782Y-129330652D01* +X126629401Y-129333600D01* +X126629401Y-129333100D01* +X127518638Y-129333100D01* +X127485725Y-129390107D01* +X127451650Y-129517274D01* +X127451650Y-129648926D01* +X127485725Y-129776093D01* +X127518638Y-129833100D01* +X126675040Y-129833100D01* +X126683659Y-129887514D01* +X126746893Y-130082127D01* +X126839788Y-130264446D01* +X126960064Y-130429991D01* +X127104758Y-130574685D01* +X127270303Y-130694961D01* +X127452622Y-130787856D01* +X127647239Y-130851091D01* +X127647235Y-130851091D01* +X127701649Y-130859708D01* +X127701650Y-130859707D01* +X127701650Y-130016112D01* +X127758657Y-130049025D01* +X127885824Y-130083100D01* +X128017476Y-130083100D01* +X128144643Y-130049025D01* +X128201650Y-130016112D01* +X128201650Y-130859708D01* +X128256062Y-130851091D01* +X128450677Y-130787856D01* +X128632996Y-130694961D01* +X128798541Y-130574685D01* +X128943235Y-130429991D01* +X129063511Y-130264447D01* +X129133440Y-130127202D01* +X129176705Y-130083938D01* +X129237137Y-130074366D01* +X129291653Y-130102143D01* +X129309860Y-130127202D01* +X129379788Y-130264447D01* +X129500064Y-130429991D01* +X129644758Y-130574685D01* +X129810303Y-130694961D01* +X129992622Y-130787856D01* +X130187239Y-130851091D01* +X130187235Y-130851091D01* +X130241649Y-130859708D01* +X130241650Y-130859707D01* +X130241650Y-130016112D01* +X130298657Y-130049025D01* +X130425824Y-130083100D01* +X130557476Y-130083100D01* +X130684643Y-130049025D01* +X130741650Y-130016112D01* +X130741650Y-130859708D01* +X130796062Y-130851091D01* +X130990677Y-130787856D01* +X131172996Y-130694961D01* +X131338541Y-130574685D01* +X131483235Y-130429991D01* +X131603511Y-130264446D01* +X131696406Y-130082127D01* +X131759640Y-129887514D01* +X131768259Y-129833100D01* +X130924662Y-129833100D01* +X130957575Y-129776093D01* +X130991650Y-129648926D01* +X130991650Y-129517274D01* +X130984203Y-129489481D01* +X132081150Y-129489481D01* +X132081150Y-129676718D01* +X132117676Y-129860349D01* +X132189327Y-130033329D01* +X132189331Y-130033338D01* +X132263715Y-130144659D01* +X132293348Y-130189008D01* +X132425742Y-130321402D01* +X132492113Y-130365749D01* +X132581411Y-130425418D01* +X132581417Y-130425420D01* +X132581419Y-130425422D01* +X132754399Y-130497073D01* +X132938034Y-130533600D01* +X132938035Y-130533600D01* +X133125265Y-130533600D01* +X133125266Y-130533600D01* +X133308901Y-130497073D01* +X133481881Y-130425422D01* +X133481884Y-130425419D01* +X133481888Y-130425418D01* +X133526837Y-130395382D01* +X133637558Y-130321402D01* +X133769952Y-130189008D01* +X133869525Y-130039987D01* +X133873968Y-130033338D01* +X133873969Y-130033334D01* +X133873972Y-130033331D01* +X133945623Y-129860351D01* +X133982150Y-129676716D01* +X133982150Y-129489484D01* +X133982149Y-129489481D01* +X137161150Y-129489481D01* +X137161150Y-129676718D01* +X137197676Y-129860349D01* +X137269327Y-130033329D01* +X137269331Y-130033338D01* +X137343715Y-130144659D01* +X137373348Y-130189008D01* +X137505742Y-130321402D01* +X137572113Y-130365749D01* +X137661411Y-130425418D01* +X137661417Y-130425420D01* +X137661419Y-130425422D01* +X137834399Y-130497073D01* +X138018034Y-130533600D01* +X138018035Y-130533600D01* +X138205265Y-130533600D01* +X138205266Y-130533600D01* +X138388901Y-130497073D01* +X138561881Y-130425422D01* +X138561884Y-130425419D01* +X138561888Y-130425418D01* +X138606837Y-130395382D01* +X138717558Y-130321402D01* +X138849952Y-130189008D01* +X138949525Y-130039987D01* +X138953968Y-130033338D01* +X138953969Y-130033334D01* +X138953972Y-130033331D01* +X139025623Y-129860351D01* +X139062150Y-129676716D01* +X139062150Y-129489484D01* +X139062149Y-129489481D01* +X139701150Y-129489481D01* +X139701150Y-129676718D01* +X139737676Y-129860349D01* +X139809327Y-130033329D01* +X139809331Y-130033338D01* +X139883715Y-130144659D01* +X139913348Y-130189008D01* +X140045742Y-130321402D01* +X140112113Y-130365749D01* +X140201411Y-130425418D01* +X140201417Y-130425420D01* +X140201419Y-130425422D01* +X140374399Y-130497073D01* +X140558034Y-130533600D01* +X140558035Y-130533600D01* +X140745265Y-130533600D01* +X140745266Y-130533600D01* +X140928901Y-130497073D01* +X141101881Y-130425422D01* +X141101884Y-130425419D01* +X141101888Y-130425418D01* +X141146837Y-130395382D01* +X141257558Y-130321402D01* +X141389952Y-130189008D01* +X141489525Y-130039987D01* +X141493968Y-130033338D01* +X141493969Y-130033334D01* +X141493972Y-130033331D01* +X141565623Y-129860351D01* +X141602150Y-129676716D01* +X141602150Y-129489484D01* +X141602149Y-129489481D01* +X142241150Y-129489481D01* +X142241150Y-129676718D01* +X142277676Y-129860349D01* +X142349327Y-130033329D01* +X142349331Y-130033338D01* +X142423715Y-130144659D01* +X142453348Y-130189008D01* +X142585742Y-130321402D01* +X142652113Y-130365749D01* +X142741411Y-130425418D01* +X142741417Y-130425420D01* +X142741419Y-130425422D01* +X142914399Y-130497073D01* +X143098034Y-130533600D01* +X143098035Y-130533600D01* +X143285265Y-130533600D01* +X143285266Y-130533600D01* +X143468901Y-130497073D01* +X143641881Y-130425422D01* +X143641884Y-130425419D01* +X143641888Y-130425418D01* +X143686837Y-130395382D01* +X143797558Y-130321402D01* +X143929952Y-130189008D01* +X144029525Y-130039987D01* +X144033968Y-130033338D01* +X144033969Y-130033334D01* +X144033972Y-130033331D01* +X144105623Y-129860351D01* +X144142150Y-129676716D01* +X144142150Y-129489484D01* +X144142149Y-129489481D01* +X144781150Y-129489481D01* +X144781150Y-129676718D01* +X144817676Y-129860349D01* +X144889327Y-130033329D01* +X144889331Y-130033338D01* +X144963715Y-130144659D01* +X144993348Y-130189008D01* +X145125742Y-130321402D01* +X145192113Y-130365749D01* +X145281411Y-130425418D01* +X145281417Y-130425420D01* +X145281419Y-130425422D01* +X145454399Y-130497073D01* +X145638034Y-130533600D01* +X145638035Y-130533600D01* +X145825265Y-130533600D01* +X145825266Y-130533600D01* +X146008901Y-130497073D01* +X146181881Y-130425422D01* +X146181884Y-130425419D01* +X146181888Y-130425418D01* +X146226837Y-130395382D01* +X146337558Y-130321402D01* +X146469952Y-130189008D01* +X146569525Y-130039987D01* +X146573968Y-130033338D01* +X146573969Y-130033334D01* +X146573972Y-130033331D01* +X146645623Y-129860351D01* +X146682150Y-129676716D01* +X146682150Y-129489484D01* +X146682149Y-129489481D01* +X147321150Y-129489481D01* +X147321150Y-129676718D01* +X147357676Y-129860349D01* +X147429327Y-130033329D01* +X147429331Y-130033338D01* +X147503715Y-130144659D01* +X147533348Y-130189008D01* +X147665742Y-130321402D01* +X147732113Y-130365749D01* +X147821411Y-130425418D01* +X147821417Y-130425420D01* +X147821419Y-130425422D01* +X147994399Y-130497073D01* +X148178034Y-130533600D01* +X148178035Y-130533600D01* +X148365265Y-130533600D01* +X148365266Y-130533600D01* +X148548901Y-130497073D01* +X148721881Y-130425422D01* +X148721884Y-130425419D01* +X148721888Y-130425418D01* +X148766837Y-130395382D01* +X148877558Y-130321402D01* +X149009952Y-130189008D01* +X149109525Y-130039987D01* +X149113968Y-130033338D01* +X149113969Y-130033334D01* +X149113972Y-130033331D01* +X149185623Y-129860351D01* +X149222150Y-129676716D01* +X149222150Y-129489484D01* +X149222149Y-129489481D01* +X149861150Y-129489481D01* +X149861150Y-129676718D01* +X149897676Y-129860349D01* +X149969327Y-130033329D01* +X149969331Y-130033338D01* +X150043715Y-130144659D01* +X150073348Y-130189008D01* +X150205742Y-130321402D01* +X150272113Y-130365749D01* +X150361411Y-130425418D01* +X150361417Y-130425420D01* +X150361419Y-130425422D01* +X150534399Y-130497073D01* +X150718034Y-130533600D01* +X150718035Y-130533600D01* +X150905265Y-130533600D01* +X150905266Y-130533600D01* +X151088901Y-130497073D01* +X151261881Y-130425422D01* +X151261884Y-130425419D01* +X151261888Y-130425418D01* +X151306837Y-130395382D01* +X151417558Y-130321402D01* +X151549952Y-130189008D01* +X151649525Y-130039987D01* +X151653968Y-130033338D01* +X151653969Y-130033334D01* +X151653972Y-130033331D01* +X151725623Y-129860351D01* +X151762150Y-129676716D01* +X151762150Y-129561430D01* +X158875000Y-129561430D01* +X158875000Y-130154999D01* +X158875001Y-130155000D01* +X159525000Y-130155000D01* +X159525000Y-130655000D01* +X158875001Y-130655000D01* +X158875000Y-130655001D01* +X158875000Y-131248569D01* +X158911508Y-131432104D01* +X158911508Y-131432106D01* +X158983118Y-131604989D01* +X158983124Y-131605001D01* +X159087087Y-131760589D01* +X159087090Y-131760593D01* +X159219406Y-131892909D01* +X159219410Y-131892912D01* +X159374998Y-131996875D01* +X159375010Y-131996881D01* +X159547888Y-132068489D01* +X159547899Y-132068492D01* +X159575000Y-132073882D01* +X159575000Y-131321988D01* +X159584940Y-131339205D01* +X159640795Y-131395060D01* +X159709204Y-131434556D01* +X159785504Y-131455000D01* +X159864496Y-131455000D01* +X159940796Y-131434556D01* +X160009205Y-131395060D01* +X160065060Y-131339205D01* +X160075000Y-131321988D01* +X160075000Y-132073881D01* +X160102100Y-132068492D01* +X160102111Y-132068489D01* +X160274989Y-131996881D01* +X160275001Y-131996875D01* +X160430589Y-131892912D01* +X160430593Y-131892909D01* +X160562909Y-131760593D01* +X160562912Y-131760589D01* +X160666879Y-131604994D01* +X160671571Y-131593666D01* +X160711306Y-131547139D01* +X160770801Y-131532854D01* +X160800922Y-131540085D01* +X160927065Y-131592335D01* +X161091279Y-131624999D01* +X161091283Y-131625000D01* +X161258717Y-131625000D01* +X161258720Y-131624999D01* +X161422933Y-131592335D01* +X161422939Y-131592333D01* +X161575557Y-131529115D01* +X166724438Y-131529115D01* +X166877065Y-131592335D01* +X167041279Y-131624999D01* +X167041283Y-131625000D01* +X167208717Y-131625000D01* +X167208720Y-131624999D01* +X167372934Y-131592335D01* +X167499077Y-131540085D01* +X167560074Y-131535284D01* +X167612243Y-131567254D01* +X167628426Y-131593661D01* +X167633119Y-131604990D01* +X167633124Y-131605001D01* +X167737087Y-131760589D01* +X167737090Y-131760593D01* +X167869406Y-131892909D01* +X167869410Y-131892912D01* +X168024998Y-131996875D01* +X168025010Y-131996881D01* +X168197888Y-132068489D01* +X168197899Y-132068492D01* +X168225000Y-132073882D01* +X168225000Y-131321988D01* +X168234940Y-131339205D01* +X168290795Y-131395060D01* +X168359204Y-131434556D01* +X168435504Y-131455000D01* +X168514496Y-131455000D01* +X168590796Y-131434556D01* +X168659205Y-131395060D01* +X168715060Y-131339205D01* +X168725000Y-131321988D01* +X168725000Y-132073881D01* +X168752100Y-132068492D01* +X168752111Y-132068489D01* +X168924989Y-131996881D01* +X168925001Y-131996875D01* +X169080589Y-131892912D01* +X169080593Y-131892909D01* +X169212909Y-131760593D01* +X169212912Y-131760589D01* +X169316875Y-131605001D01* +X169316881Y-131604989D01* +X169388491Y-131432106D01* +X169388491Y-131432104D01* +X169424999Y-131248569D01* +X169425000Y-131248565D01* +X169425000Y-130655001D01* +X169424999Y-130655000D01* +X168775000Y-130655000D01* +X168775000Y-130155000D01* +X169424999Y-130155000D01* +X169425000Y-130154999D01* +X169425000Y-129561434D01* +X169424999Y-129561430D01* +X169388491Y-129377895D01* +X169388491Y-129377893D01* +X169316881Y-129205010D01* +X169316875Y-129204998D01* +X169212912Y-129049410D01* +X169212909Y-129049406D01* +X169080593Y-128917090D01* +X169080589Y-128917087D01* +X168925001Y-128813124D01* +X168924992Y-128813120D01* +X168752105Y-128741508D01* +X168725000Y-128736116D01* +X168725000Y-129488011D01* +X168715060Y-129470795D01* +X168659205Y-129414940D01* +X168590796Y-129375444D01* +X168514496Y-129355000D01* +X168435504Y-129355000D01* +X168359204Y-129375444D01* +X168290795Y-129414940D01* +X168234940Y-129470795D01* +X168225000Y-129488011D01* +X168225000Y-128736116D01* +X168197894Y-128741508D01* +X168025006Y-128813120D01* +X167928306Y-128877733D01* +X167926618Y-128894871D01* +X167934837Y-128911002D01* +X167925266Y-128971434D01* +X167907060Y-128996492D01* +X167478554Y-129424999D01* +X167478554Y-129425000D01* +X167907060Y-129853507D01* +X167934837Y-129908023D01* +X167925266Y-129968455D01* +X167907060Y-129993513D01* +X167800574Y-130099999D01* +X167907060Y-130206485D01* +X167934837Y-130261002D01* +X167925266Y-130321434D01* +X167907060Y-130346493D01* +X167301777Y-130951777D01* +X166724438Y-131529115D01* +X161575557Y-131529115D01* +X161575559Y-131529114D01* +X160998223Y-130951777D01* +X160781664Y-130735218D01* +X160975000Y-130735218D01* +X160975000Y-130814782D01* +X161005448Y-130888291D01* +X161061709Y-130944552D01* +X161135218Y-130975000D01* +X161214782Y-130975000D01* +X161288291Y-130944552D01* +X161344552Y-130888291D01* +X161375000Y-130814782D01* +X161375000Y-130735218D01* +X161344552Y-130661709D01* +X161288291Y-130605448D01* +X161214782Y-130575000D01* +X161135218Y-130575000D01* +X161061709Y-130605448D01* +X161005448Y-130661709D01* +X160975000Y-130735218D01* +X160781664Y-130735218D01* +X160392939Y-130346493D01* +X160365162Y-130291976D01* +X160374733Y-130231544D01* +X160392940Y-130206485D01* +X160499425Y-130100000D01* +X160853555Y-130100000D01* +X161175000Y-130421445D01* +X161496445Y-130100000D01* +X161175000Y-129778555D01* +X160853555Y-130100000D01* +X160499425Y-130100000D01* +X160392939Y-129993514D01* +X160365162Y-129938997D01* +X160374733Y-129878565D01* +X160392939Y-129853506D01* +X160821446Y-129424999D01* +X160781665Y-129385218D01* +X160975000Y-129385218D01* +X160975000Y-129464782D01* +X161005448Y-129538291D01* +X161061709Y-129594552D01* +X161135218Y-129625000D01* +X161214782Y-129625000D01* +X161288291Y-129594552D01* +X161344552Y-129538291D01* +X161375000Y-129464782D01* +X161375000Y-129385218D01* +X161344552Y-129311709D01* +X161288291Y-129255448D01* +X161214782Y-129225000D01* +X161135218Y-129225000D01* +X161061709Y-129255448D01* +X161005448Y-129311709D01* +X160975000Y-129385218D01* +X160781665Y-129385218D01* +X160392939Y-128996492D01* +X160365162Y-128941976D01* +X160373089Y-128891919D01* +X160371692Y-128877733D01* +X160274991Y-128813120D01* +X160231087Y-128794934D01* +X160102105Y-128741508D01* +X160075000Y-128736116D01* +X160075000Y-129488011D01* +X160065060Y-129470795D01* +X160009205Y-129414940D01* +X159940796Y-129375444D01* +X159864496Y-129355000D01* +X159785504Y-129355000D01* +X159709204Y-129375444D01* +X159640795Y-129414940D01* +X159584940Y-129470795D01* +X159575000Y-129488011D01* +X159575000Y-128736116D01* +X159547894Y-128741508D01* +X159375007Y-128813120D01* +X159374998Y-128813124D01* +X159219410Y-128917087D01* +X159219406Y-128917090D01* +X159087090Y-129049406D01* +X159087087Y-129049410D01* +X158983124Y-129204998D01* +X158983118Y-129205010D01* +X158911508Y-129377893D01* +X158911508Y-129377895D01* +X158875000Y-129561430D01* +X151762150Y-129561430D01* +X151762150Y-129489484D01* +X151725623Y-129305849D01* +X151653972Y-129132869D01* +X151653970Y-129132867D01* +X151653968Y-129132861D01* +X151581560Y-129024497D01* +X151549952Y-128977192D01* +X151417558Y-128844798D01* +X151373209Y-128815165D01* +X151261888Y-128740781D01* +X151261879Y-128740777D01* +X151093141Y-128670883D01* +X160774438Y-128670883D01* +X161175000Y-129071445D01* +X161575560Y-128670884D01* +X161575560Y-128670883D01* +X161422936Y-128607665D01* +X161258720Y-128575000D01* +X161091279Y-128575000D01* +X160927064Y-128607665D01* +X160927062Y-128607665D01* +X160774438Y-128670883D01* +X151093141Y-128670883D01* +X151088899Y-128669126D01* +X150905268Y-128632600D01* +X150905266Y-128632600D01* +X150718034Y-128632600D01* +X150718031Y-128632600D01* +X150534400Y-128669126D01* +X150361420Y-128740777D01* +X150361411Y-128740781D01* +X150205742Y-128844798D01* +X150205738Y-128844801D01* +X150073351Y-128977188D01* +X150073348Y-128977192D01* +X149969331Y-129132861D01* +X149969327Y-129132870D01* +X149897676Y-129305850D01* +X149861150Y-129489481D01* +X149222149Y-129489481D01* +X149185623Y-129305849D01* +X149113972Y-129132869D01* +X149113970Y-129132867D01* +X149113968Y-129132861D01* +X149041560Y-129024497D01* +X149009952Y-128977192D01* +X148877558Y-128844798D01* +X148833209Y-128815165D01* +X148721888Y-128740781D01* +X148721879Y-128740777D01* +X148548899Y-128669126D01* +X148365268Y-128632600D01* +X148365266Y-128632600D01* +X148178034Y-128632600D01* +X148178031Y-128632600D01* +X147994400Y-128669126D01* +X147821420Y-128740777D01* +X147821411Y-128740781D01* +X147665742Y-128844798D01* +X147665738Y-128844801D01* +X147533351Y-128977188D01* +X147533348Y-128977192D01* +X147429331Y-129132861D01* +X147429327Y-129132870D01* +X147357676Y-129305850D01* +X147321150Y-129489481D01* +X146682149Y-129489481D01* +X146645623Y-129305849D01* +X146573972Y-129132869D01* +X146573970Y-129132867D01* +X146573968Y-129132861D01* +X146501560Y-129024497D01* +X146469952Y-128977192D01* +X146337558Y-128844798D01* +X146293209Y-128815165D01* +X146181888Y-128740781D01* +X146181879Y-128740777D01* +X146008899Y-128669126D01* +X145825268Y-128632600D01* +X145825266Y-128632600D01* +X145638034Y-128632600D01* +X145638031Y-128632600D01* +X145454400Y-128669126D01* +X145281420Y-128740777D01* +X145281411Y-128740781D01* +X145125742Y-128844798D01* +X145125738Y-128844801D01* +X144993351Y-128977188D01* +X144993348Y-128977192D01* +X144889331Y-129132861D01* +X144889327Y-129132870D01* +X144817676Y-129305850D01* +X144781150Y-129489481D01* +X144142149Y-129489481D01* +X144105623Y-129305849D01* +X144033972Y-129132869D01* +X144033970Y-129132867D01* +X144033968Y-129132861D01* +X143961560Y-129024497D01* +X143929952Y-128977192D01* +X143797558Y-128844798D01* +X143753209Y-128815165D01* +X143641888Y-128740781D01* +X143641879Y-128740777D01* +X143468899Y-128669126D01* +X143285268Y-128632600D01* +X143285266Y-128632600D01* +X143098034Y-128632600D01* +X143098031Y-128632600D01* +X142914400Y-128669126D01* +X142741420Y-128740777D01* +X142741411Y-128740781D01* +X142585742Y-128844798D01* +X142585738Y-128844801D01* +X142453351Y-128977188D01* +X142453348Y-128977192D01* +X142349331Y-129132861D01* +X142349327Y-129132870D01* +X142277676Y-129305850D01* +X142241150Y-129489481D01* +X141602149Y-129489481D01* +X141565623Y-129305849D01* +X141493972Y-129132869D01* +X141493970Y-129132867D01* +X141493968Y-129132861D01* +X141421560Y-129024497D01* +X141389952Y-128977192D01* +X141257558Y-128844798D01* +X141213209Y-128815165D01* +X141101888Y-128740781D01* +X141101879Y-128740777D01* +X140928899Y-128669126D01* +X140745268Y-128632600D01* +X140745266Y-128632600D01* +X140558034Y-128632600D01* +X140558031Y-128632600D01* +X140374400Y-128669126D01* +X140201420Y-128740777D01* +X140201411Y-128740781D01* +X140045742Y-128844798D01* +X140045738Y-128844801D01* +X139913351Y-128977188D01* +X139913348Y-128977192D01* +X139809331Y-129132861D01* +X139809327Y-129132870D01* +X139737676Y-129305850D01* +X139701150Y-129489481D01* +X139062149Y-129489481D01* +X139025623Y-129305849D01* +X138953972Y-129132869D01* +X138953970Y-129132867D01* +X138953968Y-129132861D01* +X138881560Y-129024497D01* +X138849952Y-128977192D01* +X138717558Y-128844798D01* +X138673209Y-128815165D01* +X138561888Y-128740781D01* +X138561879Y-128740777D01* +X138388899Y-128669126D01* +X138205268Y-128632600D01* +X138205266Y-128632600D01* +X138018034Y-128632600D01* +X138018031Y-128632600D01* +X137834400Y-128669126D01* +X137661420Y-128740777D01* +X137661411Y-128740781D01* +X137505742Y-128844798D01* +X137505738Y-128844801D01* +X137373351Y-128977188D01* +X137373348Y-128977192D01* +X137269331Y-129132861D01* +X137269327Y-129132870D01* +X137197676Y-129305850D01* +X137161150Y-129489481D01* +X133982149Y-129489481D01* +X133945623Y-129305849D01* +X133873972Y-129132869D01* +X133873970Y-129132867D01* +X133873968Y-129132861D01* +X133801560Y-129024497D01* +X133769952Y-128977192D01* +X133637558Y-128844798D01* +X133593209Y-128815165D01* +X133481888Y-128740781D01* +X133481879Y-128740777D01* +X133308899Y-128669126D01* +X133125268Y-128632600D01* +X133125266Y-128632600D01* +X132938034Y-128632600D01* +X132938031Y-128632600D01* +X132754400Y-128669126D01* +X132581420Y-128740777D01* +X132581411Y-128740781D01* +X132425742Y-128844798D01* +X132425738Y-128844801D01* +X132293351Y-128977188D01* +X132293348Y-128977192D01* +X132189331Y-129132861D01* +X132189327Y-129132870D01* +X132117676Y-129305850D01* +X132081150Y-129489481D01* +X130984203Y-129489481D01* +X130957575Y-129390107D01* +X130924662Y-129333100D01* +X131768259Y-129333100D01* +X131768259Y-129333099D01* +X131759640Y-129278685D01* +X131696406Y-129084072D01* +X131603511Y-128901753D01* +X131483235Y-128736208D01* +X131338541Y-128591514D01* +X131172996Y-128471238D01* +X130990677Y-128378343D01* +X130796064Y-128315109D01* +X130741650Y-128306490D01* +X130741650Y-129150088D01* +X130684643Y-129117175D01* +X130557476Y-129083100D01* +X130425824Y-129083100D01* +X130298657Y-129117175D01* +X130241650Y-129150088D01* +X130241650Y-128306491D01* +X130241649Y-128306490D01* +X130187235Y-128315109D01* +X129992622Y-128378343D01* +X129810303Y-128471238D01* +X129644758Y-128591514D01* +X129500064Y-128736208D01* +X129379788Y-128901753D01* +X129309860Y-129038997D01* +X129266595Y-129082262D01* +X129206163Y-129091833D01* +X129151647Y-129064056D01* +X129133440Y-129038997D01* +X129063511Y-128901753D01* +X128943235Y-128736208D01* +X128798541Y-128591514D01* +X128632996Y-128471238D01* +X128450677Y-128378343D01* +X128256064Y-128315109D01* +X128201650Y-128306490D01* +X128201650Y-129150088D01* +X128144643Y-129117175D01* +X128017476Y-129083100D01* +X127885824Y-129083100D01* +X127758657Y-129117175D01* +X127701650Y-129150088D01* +X127701650Y-128282349D01* +X127700718Y-128280829D01* +X127701650Y-128268987D01* +X127701650Y-128260851D01* +X127702290Y-128260851D01* +X127705519Y-128219832D01* +X127726974Y-128187721D01* +X130572955Y-125341740D01* +X160799500Y-125341740D01* +X160799500Y-125808260D01* +X160802012Y-125825500D01* +X160809427Y-125876395D01* +X160850539Y-125960489D01* +X160860802Y-125981483D01* +X160943517Y-126064198D01* +X160997285Y-126090483D01* +X161048604Y-126115572D01* +X161048605Y-126115572D01* +X161048607Y-126115573D01* +X161116740Y-126125500D01* +X161580231Y-126125500D01* +X161638422Y-126144407D01* +X161650235Y-126154496D01* +X162595504Y-127099764D01* +X162623281Y-127154281D01* +X162624500Y-127169768D01* +X162624500Y-128934540D01* +X162605593Y-128992731D01* +X162591560Y-129008277D01* +X162583902Y-129015137D01* +X162567686Y-129024500D01* +X162518076Y-129074109D01* +X162516060Y-129075916D01* +X162490445Y-129087243D01* +X162465487Y-129099960D01* +X162462690Y-129099517D01* +X162460102Y-129100662D01* +X162432727Y-129094771D01* +X162405055Y-129090389D01* +X162401981Y-129088155D01* +X162400286Y-129087791D01* +X162398061Y-129085308D01* +X162379999Y-129072185D01* +X162332314Y-129024500D01* +X162332311Y-129024498D01* +X162332309Y-129024496D01* +X162218189Y-128958609D01* +X162218191Y-128958609D01* +X162156114Y-128941976D01* +X162090892Y-128924500D01* +X161959108Y-128924500D01* +X161893886Y-128941976D01* +X161831809Y-128958609D01* +X161717690Y-129024496D01* +X161624496Y-129117690D01* +X161558609Y-129231809D01* +X161546049Y-129278685D01* +X161524500Y-129359108D01* +X161524500Y-129490892D01* +X161547858Y-129578065D01* +X161558609Y-129618190D01* +X161624496Y-129732309D01* +X161624498Y-129732311D01* +X161624500Y-129732314D01* +X161717686Y-129825500D01* +X161717688Y-129825501D01* +X161717690Y-129825503D01* +X161831810Y-129891390D01* +X161831808Y-129891390D01* +X161831812Y-129891391D01* +X161831814Y-129891392D01* +X161959108Y-129925500D01* +X161959110Y-129925500D01* +X162090890Y-129925500D01* +X162090892Y-129925500D01* +X162218186Y-129891392D01* +X162218188Y-129891390D01* +X162218190Y-129891390D01* +X162332309Y-129825503D01* +X162332309Y-129825502D01* +X162332314Y-129825500D01* +X162379998Y-129777815D01* +X162434513Y-129750040D01* +X162494945Y-129759611D01* +X162520000Y-129777814D01* +X162567686Y-129825500D01* +X162567688Y-129825501D01* +X162567690Y-129825503D01* +X162681810Y-129891390D01* +X162681808Y-129891390D01* +X162681812Y-129891391D01* +X162681814Y-129891392D01* +X162809108Y-129925500D01* +X162809110Y-129925500D01* +X162940890Y-129925500D01* +X162940892Y-129925500D01* +X163068186Y-129891392D01* +X163068188Y-129891390D01* +X163068190Y-129891390D01* +X163182309Y-129825503D01* +X163182309Y-129825502D01* +X163182314Y-129825500D01* +X163229998Y-129777815D01* +X163284513Y-129750040D01* +X163344945Y-129759611D01* +X163370000Y-129777814D01* +X163417686Y-129825500D01* +X163417688Y-129825501D01* +X163417690Y-129825503D01* +X163531810Y-129891390D01* +X163531811Y-129891390D01* +X163531814Y-129891392D01* +X163581754Y-129904773D01* +X163626135Y-129930396D01* +X163801235Y-130105496D01* +X163829012Y-130160013D01* +X163819441Y-130220445D01* +X163776176Y-130263710D01* +X163731231Y-130274500D01* +X163659108Y-130274500D01* +X163593886Y-130291976D01* +X163531809Y-130308609D01* +X163417690Y-130374496D01* +X163417689Y-130374497D01* +X163417686Y-130374499D01* +X163417686Y-130374500D01* +X163370001Y-130422184D01* +X163315487Y-130449960D01* +X163255055Y-130440389D01* +X163229999Y-130422185D01* +X163182314Y-130374500D01* +X163182311Y-130374498D01* +X163182309Y-130374496D01* +X163068189Y-130308609D01* +X163068191Y-130308609D01* +X163006114Y-130291976D01* +X162940892Y-130274500D01* +X162809108Y-130274500D01* +X162743886Y-130291976D01* +X162681809Y-130308609D01* +X162567690Y-130374496D01* +X162567689Y-130374497D01* +X162567686Y-130374499D01* +X162567686Y-130374500D01* +X162520001Y-130422184D01* +X162465487Y-130449960D01* +X162405055Y-130440389D01* +X162379999Y-130422185D01* +X162332314Y-130374500D01* +X162332311Y-130374498D01* +X162332309Y-130374496D01* +X162218189Y-130308609D01* +X162218191Y-130308609D01* +X162156114Y-130291976D01* +X162090892Y-130274500D01* +X161959108Y-130274500D01* +X161893886Y-130291976D01* +X161831809Y-130308609D01* +X161717690Y-130374496D01* +X161624496Y-130467690D01* +X161558609Y-130581809D01* +X161558608Y-130581814D01* +X161524500Y-130709108D01* +X161524500Y-130840892D01* +X161552275Y-130944552D01* +X161558609Y-130968190D01* +X161624496Y-131082309D01* +X161624498Y-131082311D01* +X161624500Y-131082314D01* +X161717686Y-131175500D01* +X161717688Y-131175501D01* +X161717690Y-131175503D01* +X161831810Y-131241390D01* +X161831808Y-131241390D01* +X161831812Y-131241391D01* +X161831814Y-131241392D01* +X161959108Y-131275500D01* +X161959110Y-131275500D01* +X162090890Y-131275500D01* +X162090892Y-131275500D01* +X162218186Y-131241392D01* +X162218188Y-131241390D01* +X162218190Y-131241390D01* +X162332309Y-131175503D01* +X162332309Y-131175502D01* +X162332314Y-131175500D01* +X162379998Y-131127815D01* +X162434513Y-131100040D01* +X162494945Y-131109611D01* +X162520000Y-131127814D01* +X162567686Y-131175500D01* +X162567688Y-131175501D01* +X162567690Y-131175503D01* +X162681810Y-131241390D01* +X162681808Y-131241390D01* +X162681812Y-131241391D01* +X162681814Y-131241392D01* +X162809108Y-131275500D01* +X162809110Y-131275500D01* +X162940890Y-131275500D01* +X162940892Y-131275500D01* +X163068186Y-131241392D01* +X163068188Y-131241390D01* +X163068190Y-131241390D01* +X163182309Y-131175503D01* +X163182309Y-131175502D01* +X163182314Y-131175500D01* +X163229998Y-131127815D01* +X163284513Y-131100040D01* +X163344945Y-131109611D01* +X163370000Y-131127814D01* +X163417686Y-131175500D01* +X163417688Y-131175501D01* +X163417690Y-131175503D01* +X163531810Y-131241390D01* +X163531808Y-131241390D01* +X163531812Y-131241391D01* +X163531814Y-131241392D01* +X163659108Y-131275500D01* +X163659110Y-131275500D01* +X163790890Y-131275500D01* +X163790892Y-131275500D01* +X163918186Y-131241392D01* +X163918188Y-131241390D01* +X163918190Y-131241390D01* +X164032309Y-131175503D01* +X164032309Y-131175502D01* +X164032314Y-131175500D01* +X164079998Y-131127815D01* +X164134513Y-131100040D01* +X164194945Y-131109611D01* +X164220000Y-131127814D01* +X164267686Y-131175500D01* +X164267688Y-131175501D01* +X164267690Y-131175503D01* +X164381810Y-131241390D01* +X164381808Y-131241390D01* +X164381812Y-131241391D01* +X164381814Y-131241392D01* +X164509108Y-131275500D01* +X164509110Y-131275500D01* +X164640890Y-131275500D01* +X164640892Y-131275500D01* +X164768186Y-131241392D01* +X164768188Y-131241390D01* +X164768190Y-131241390D01* +X164882309Y-131175503D01* +X164882309Y-131175502D01* +X164882314Y-131175500D01* +X164929998Y-131127815D01* +X164984513Y-131100040D01* +X165044945Y-131109611D01* +X165070000Y-131127814D01* +X165117686Y-131175500D01* +X165117688Y-131175501D01* +X165117690Y-131175503D01* +X165231810Y-131241390D01* +X165231808Y-131241390D01* +X165231812Y-131241391D01* +X165231814Y-131241392D01* +X165359108Y-131275500D01* +X165359110Y-131275500D01* +X165490890Y-131275500D01* +X165490892Y-131275500D01* +X165618186Y-131241392D01* +X165618188Y-131241390D01* +X165618190Y-131241390D01* +X165732309Y-131175503D01* +X165732309Y-131175502D01* +X165732314Y-131175500D01* +X165779998Y-131127815D01* +X165834513Y-131100040D01* +X165894945Y-131109611D01* +X165920000Y-131127814D01* +X165967686Y-131175500D01* +X165967688Y-131175501D01* +X165967690Y-131175503D01* +X166081810Y-131241390D01* +X166081808Y-131241390D01* +X166081812Y-131241391D01* +X166081814Y-131241392D01* +X166209108Y-131275500D01* +X166209110Y-131275500D01* +X166340890Y-131275500D01* +X166340892Y-131275500D01* +X166468186Y-131241392D01* +X166468188Y-131241390D01* +X166468190Y-131241390D01* +X166582309Y-131175503D01* +X166582309Y-131175502D01* +X166582314Y-131175500D01* +X166675500Y-131082314D01* +X166675503Y-131082309D01* +X166741390Y-130968190D01* +X166741390Y-130968188D01* +X166741392Y-130968186D01* +X166775500Y-130840892D01* +X166775500Y-130735218D01* +X166925000Y-130735218D01* +X166925000Y-130814782D01* +X166955448Y-130888291D01* +X167011709Y-130944552D01* +X167085218Y-130975000D01* +X167164782Y-130975000D01* +X167238291Y-130944552D01* +X167294552Y-130888291D01* +X167325000Y-130814782D01* +X167325000Y-130735218D01* +X167294552Y-130661709D01* +X167238291Y-130605448D01* +X167164782Y-130575000D01* +X167085218Y-130575000D01* +X167011709Y-130605448D01* +X166955448Y-130661709D01* +X166925000Y-130735218D01* +X166775500Y-130735218D01* +X166775500Y-130709108D01* +X166741392Y-130581814D01* +X166741390Y-130581811D01* +X166741390Y-130581809D01* +X166675503Y-130467690D01* +X166675501Y-130467688D01* +X166675500Y-130467686D01* +X166582314Y-130374500D01* +X166582311Y-130374498D01* +X166582309Y-130374496D01* +X166468189Y-130308609D01* +X166468191Y-130308609D01* +X166406114Y-130291976D01* +X166340892Y-130274500D01* +X166209108Y-130274500D01* +X166143886Y-130291976D01* +X166081809Y-130308609D01* +X165967690Y-130374496D01* +X165967689Y-130374497D01* +X165967686Y-130374499D01* +X165967686Y-130374500D01* +X165920001Y-130422184D01* +X165865487Y-130449960D01* +X165805055Y-130440389D01* +X165779999Y-130422185D01* +X165732314Y-130374500D01* +X165732311Y-130374498D01* +X165732309Y-130374496D01* +X165618189Y-130308609D01* +X165618191Y-130308609D01* +X165556114Y-130291976D01* +X165490892Y-130274500D01* +X165359108Y-130274500D01* +X165293886Y-130291976D01* +X165231809Y-130308609D01* +X165117690Y-130374496D01* +X165117689Y-130374497D01* +X165117686Y-130374499D01* +X165117686Y-130374500D01* +X165070001Y-130422184D01* +X165015487Y-130449960D01* +X164955055Y-130440389D01* +X164929999Y-130422185D01* +X164882314Y-130374500D01* +X164882311Y-130374498D01* +X164882309Y-130374496D01* +X164768189Y-130308609D01* +X164768185Y-130308607D01* +X164718243Y-130295225D01* +X164673863Y-130269603D01* +X164504260Y-130100000D01* +X166803555Y-130100000D01* +X167125000Y-130421445D01* +X167446445Y-130100000D01* +X167125000Y-129778555D01* +X166803555Y-130100000D01* +X164504260Y-130100000D01* +X164498764Y-130094504D01* +X164470987Y-130039987D01* +X164480558Y-129979555D01* +X164523823Y-129936290D01* +X164568768Y-129925500D01* +X164640890Y-129925500D01* +X164640892Y-129925500D01* +X164768186Y-129891392D01* +X164768188Y-129891390D01* +X164768190Y-129891390D01* +X164882309Y-129825503D01* +X164882309Y-129825502D01* +X164882314Y-129825500D01* +X164929998Y-129777815D01* +X164984513Y-129750040D01* +X165044945Y-129759611D01* +X165070000Y-129777814D01* +X165117686Y-129825500D01* +X165117688Y-129825501D01* +X165117690Y-129825503D01* +X165231810Y-129891390D01* +X165231808Y-129891390D01* +X165231812Y-129891391D01* +X165231814Y-129891392D01* +X165359108Y-129925500D01* +X165359110Y-129925500D01* +X165490890Y-129925500D01* +X165490892Y-129925500D01* +X165618186Y-129891392D01* +X165618188Y-129891390D01* +X165618190Y-129891390D01* +X165732309Y-129825503D01* +X165732309Y-129825502D01* +X165732314Y-129825500D01* +X165779998Y-129777815D01* +X165834513Y-129750040D01* +X165894945Y-129759611D01* +X165920000Y-129777814D01* +X165967686Y-129825500D01* +X165967688Y-129825501D01* +X165967690Y-129825503D01* +X166081810Y-129891390D01* +X166081808Y-129891390D01* +X166081812Y-129891391D01* +X166081814Y-129891392D01* +X166209108Y-129925500D01* +X166209110Y-129925500D01* +X166340890Y-129925500D01* +X166340892Y-129925500D01* +X166468186Y-129891392D01* +X166468188Y-129891390D01* +X166468190Y-129891390D01* +X166582309Y-129825503D01* +X166582309Y-129825502D01* +X166582314Y-129825500D01* +X166675500Y-129732314D01* +X166679554Y-129725292D01* +X166741390Y-129618190D01* +X166741390Y-129618188D01* +X166741392Y-129618186D01* +X166775500Y-129490892D01* +X166775500Y-129385218D01* +X166925000Y-129385218D01* +X166925000Y-129464782D01* +X166955448Y-129538291D01* +X167011709Y-129594552D01* +X167085218Y-129625000D01* +X167164782Y-129625000D01* +X167238291Y-129594552D01* +X167294552Y-129538291D01* +X167325000Y-129464782D01* +X167325000Y-129385218D01* +X167294552Y-129311709D01* +X167238291Y-129255448D01* +X167164782Y-129225000D01* +X167085218Y-129225000D01* +X167011709Y-129255448D01* +X166955448Y-129311709D01* +X166925000Y-129385218D01* +X166775500Y-129385218D01* +X166775500Y-129359108D01* +X166741392Y-129231814D01* +X166741390Y-129231811D01* +X166741390Y-129231809D01* +X166675503Y-129117690D01* +X166675501Y-129117688D01* +X166675500Y-129117686D01* +X166582314Y-129024500D01* +X166582311Y-129024498D01* +X166582309Y-129024496D01* +X166468189Y-128958609D01* +X166468191Y-128958609D01* +X166406114Y-128941976D01* +X166340892Y-128924500D01* +X166209108Y-128924500D01* +X166143886Y-128941976D01* +X166081809Y-128958609D01* +X165967690Y-129024496D01* +X165967689Y-129024497D01* +X165967686Y-129024499D01* +X165967686Y-129024500D01* +X165920001Y-129072184D01* +X165865487Y-129099960D01* +X165805055Y-129090389D01* +X165779999Y-129072185D01* +X165732314Y-129024500D01* +X165732311Y-129024498D01* +X165732309Y-129024496D01* +X165618189Y-128958609D01* +X165618191Y-128958609D01* +X165556114Y-128941976D01* +X165490892Y-128924500D01* +X165359108Y-128924500D01* +X165293886Y-128941976D01* +X165231809Y-128958609D01* +X165117690Y-129024496D01* +X165117689Y-129024497D01* +X165117686Y-129024499D01* +X165117686Y-129024500D01* +X165070001Y-129072184D01* +X165015487Y-129099960D01* +X164955055Y-129090389D01* +X164929999Y-129072185D01* +X164882314Y-129024500D01* +X164882311Y-129024498D01* +X164882309Y-129024496D01* +X164768189Y-128958609D01* +X164768191Y-128958609D01* +X164706114Y-128941976D01* +X164640892Y-128924500D01* +X164509108Y-128924500D01* +X164443886Y-128941976D01* +X164381809Y-128958609D01* +X164267690Y-129024496D01* +X164267689Y-129024497D01* +X164267686Y-129024499D01* +X164267686Y-129024500D01* +X164220001Y-129072184D01* +X164165487Y-129099960D01* +X164105055Y-129090389D01* +X164079999Y-129072185D01* +X164032314Y-129024500D01* +X164032311Y-129024498D01* +X164032309Y-129024496D01* +X163918189Y-128958609D01* +X163918191Y-128958609D01* +X163856114Y-128941976D01* +X163790892Y-128924500D01* +X163659108Y-128924500D01* +X163593886Y-128941976D01* +X163531809Y-128958609D01* +X163417690Y-129024496D01* +X163417689Y-129024497D01* +X163417686Y-129024499D01* +X163417686Y-129024500D01* +X163370001Y-129072184D01* +X163358400Y-129078095D01* +X163349714Y-129087791D01* +X163331809Y-129091643D01* +X163315487Y-129099960D01* +X163302626Y-129097923D01* +X163289898Y-129100662D01* +X163274901Y-129093532D01* +X163255055Y-129090389D01* +X163233940Y-129075916D01* +X163231923Y-129074109D01* +X163182314Y-129024500D01* +X163166097Y-129015137D01* +X163158440Y-129008277D01* +X163147985Y-128990272D01* +X163134058Y-128974804D01* +X163131203Y-128961373D01* +X163127715Y-128955366D01* +X163128434Y-128948347D01* +X163125500Y-128934540D01* +X163125500Y-128670883D01* +X166724438Y-128670883D01* +X167125000Y-129071445D01* +X167525560Y-128670884D01* +X167525560Y-128670883D01* +X167372936Y-128607665D01* +X167208720Y-128575000D01* +X167041279Y-128575000D01* +X166877064Y-128607665D01* +X166877062Y-128607665D01* +X166724438Y-128670883D01* +X163125500Y-128670883D01* +X163125500Y-127086359D01* +X163125501Y-127086350D01* +X163125501Y-126975173D01* +X163093885Y-126898847D01* +X163087364Y-126883104D01* +X163087364Y-126883103D01* +X163016897Y-126812636D01* +X163016895Y-126812635D01* +X162079496Y-125875235D01* +X162051719Y-125820718D01* +X162050500Y-125805231D01* +X162050500Y-125341743D01* +X162050500Y-125341740D01* +X164774500Y-125341740D01* +X164774500Y-125808260D01* +X164777012Y-125825500D01* +X164784427Y-125876395D01* +X164825539Y-125960489D01* +X164835802Y-125981483D01* +X164918517Y-126064198D01* +X164972285Y-126090483D01* +X165023604Y-126115572D01* +X165023605Y-126115572D01* +X165023607Y-126115573D01* +X165091740Y-126125500D01* +X165091743Y-126125500D01* +X165708257Y-126125500D01* +X165708260Y-126125500D01* +X165776393Y-126115573D01* +X165881483Y-126064198D01* +X165964198Y-125981483D01* +X166013311Y-125881019D01* +X166055854Y-125837046D01* +X166102252Y-125825500D01* +X167052844Y-125825500D01* +X167111035Y-125844407D01* +X167135465Y-125871541D01* +X167135562Y-125871467D01* +X167136505Y-125872696D01* +X167138580Y-125875001D01* +X167139511Y-125876613D01* +X167223387Y-125960489D01* +X167223389Y-125960490D01* +X167223391Y-125960492D01* +X167326110Y-126019797D01* +X167326111Y-126019797D01* +X167326114Y-126019799D01* +X167440691Y-126050500D01* +X167440693Y-126050500D01* +X167559307Y-126050500D01* +X167559309Y-126050500D01* +X167673886Y-126019799D01* +X167673888Y-126019797D01* +X167673890Y-126019797D01* +X167776608Y-125960492D01* +X167776608Y-125960491D01* +X167776613Y-125960489D01* +X167860489Y-125876613D01* +X167883333Y-125837046D01* +X167919797Y-125773890D01* +X167919797Y-125773888D01* +X167919799Y-125773886D01* +X167950500Y-125659309D01* +X167950500Y-125540691D01* +X167919799Y-125426114D01* +X167919797Y-125426111D01* +X167919797Y-125426109D01* +X167860492Y-125323391D01* +X167860490Y-125323389D01* +X167860489Y-125323387D01* +X167776613Y-125239511D01* +X167776610Y-125239509D01* +X167776608Y-125239507D01* +X167673889Y-125180202D01* +X167673890Y-125180202D01* +X167660351Y-125176574D01* +X167559309Y-125149500D01* +X167440691Y-125149500D01* +X167370567Y-125168289D01* +X167326109Y-125180202D01* +X167223391Y-125239507D01* +X167223390Y-125239508D01* +X167223387Y-125239510D01* +X167223387Y-125239511D01* +X167167392Y-125295505D01* +X167112878Y-125323281D01* +X167097391Y-125324500D01* +X166102252Y-125324500D01* +X166044061Y-125305593D01* +X166013311Y-125268980D01* +X165964198Y-125168517D01* +X165881483Y-125085802D01* +X165881481Y-125085801D01* +X165776395Y-125034427D01* +X165749139Y-125030456D01* +X165708260Y-125024500D01* +X165091740Y-125024500D01* +X165057673Y-125029463D01* +X165023604Y-125034427D01* +X164918518Y-125085801D01* +X164835801Y-125168518D01* +X164784427Y-125273604D01* +X164779767Y-125305593D01* +X164774500Y-125341740D01* +X162050500Y-125341740D01* +X162047988Y-125324500D01* +X162040573Y-125273607D01* +X161989198Y-125168517D01* +X161906483Y-125085802D01* +X161906481Y-125085801D01* +X161801395Y-125034427D01* +X161774139Y-125030456D01* +X161733260Y-125024500D01* +X161116740Y-125024500D01* +X161082673Y-125029463D01* +X161048604Y-125034427D01* +X160943518Y-125085801D01* +X160860801Y-125168518D01* +X160809427Y-125273604D01* +X160804767Y-125305593D01* +X160799500Y-125341740D01* +X130572955Y-125341740D01* +X131739694Y-124175001D01* +X160450001Y-124175001D01* +X160450001Y-124181582D01* +X160456408Y-124252103D01* +X160456410Y-124252109D01* +X160506979Y-124414392D01* +X160506982Y-124414400D01* +X160594924Y-124559872D01* +X160715127Y-124680075D01* +X160860599Y-124768017D01* +X160860607Y-124768020D01* +X161022889Y-124818589D01* +X161022895Y-124818591D01* +X161093424Y-124824999D01* +X161174999Y-124824998D01* +X161175000Y-124824998D01* +X161175000Y-124175001D01* +X161675000Y-124175001D01* +X161675000Y-124824998D01* +X161675001Y-124824999D01* +X161756566Y-124824999D01* +X161756582Y-124824998D01* +X161827103Y-124818591D01* +X161827109Y-124818589D01* +X161989392Y-124768020D01* +X161989400Y-124768017D01* +X162134872Y-124680075D01* +X162255075Y-124559872D01* +X162343017Y-124414400D01* +X162343020Y-124414392D01* +X162393589Y-124252110D01* +X162393591Y-124252104D01* +X162399999Y-124181581D01* +X162400000Y-124181568D01* +X162400000Y-124175001D01* +X164425001Y-124175001D01* +X164425001Y-124181582D01* +X164431408Y-124252103D01* +X164431410Y-124252109D01* +X164481979Y-124414392D01* +X164481982Y-124414400D01* +X164569924Y-124559872D01* +X164690127Y-124680075D01* +X164835599Y-124768017D01* +X164835607Y-124768020D01* +X164997889Y-124818589D01* +X164997895Y-124818591D01* +X165068424Y-124824999D01* +X165149999Y-124824998D01* +X165150000Y-124824998D01* +X165150000Y-124175001D01* +X165650000Y-124175001D01* +X165650000Y-124824998D01* +X165650001Y-124824999D01* +X165731566Y-124824999D01* +X165731582Y-124824998D01* +X165802103Y-124818591D01* +X165802109Y-124818589D01* +X165964392Y-124768020D01* +X165964400Y-124768017D01* +X166109872Y-124680075D01* +X166230075Y-124559872D01* +X166318017Y-124414400D01* +X166318020Y-124414392D01* +X166368589Y-124252110D01* +X166368591Y-124252104D01* +X166374999Y-124181581D01* +X166375000Y-124181568D01* +X166375000Y-124175001D01* +X166374999Y-124175000D01* +X165650001Y-124175000D01* +X165650000Y-124175001D01* +X165150000Y-124175001D01* +X165149999Y-124175000D01* +X164425002Y-124175000D01* +X164425001Y-124175001D01* +X162400000Y-124175001D01* +X162399999Y-124175000D01* +X161675001Y-124175000D01* +X161675000Y-124175001D01* +X161175000Y-124175001D01* +X161174999Y-124175000D01* +X160450002Y-124175000D01* +X160450001Y-124175001D01* +X131739694Y-124175001D01* +X132246277Y-123668418D01* +X160450000Y-123668418D01* +X160450000Y-123674999D01* +X160450001Y-123675000D01* +X161174999Y-123675000D01* +X161175000Y-123674999D01* +X161175000Y-123025001D01* +X161675000Y-123025001D01* +X161675000Y-123674999D01* +X161675001Y-123675000D01* +X162399998Y-123675000D01* +X162399999Y-123674999D01* +X162399999Y-123668434D01* +X162399998Y-123668418D01* +X164425000Y-123668418D01* +X164425000Y-123674999D01* +X164425001Y-123675000D01* +X165149999Y-123675000D01* +X165150000Y-123674999D01* +X165150000Y-123025001D01* +X165650000Y-123025001D01* +X165650000Y-123674999D01* +X165650001Y-123675000D01* +X166374998Y-123675000D01* +X166374999Y-123674999D01* +X166374999Y-123668433D01* +X166374998Y-123668417D01* +X166368591Y-123597896D01* +X166368589Y-123597890D01* +X166318020Y-123435607D01* +X166318017Y-123435599D01* +X166230075Y-123290127D01* +X166109872Y-123169924D01* +X165964400Y-123081982D01* +X165964392Y-123081979D01* +X165802110Y-123031410D01* +X165802104Y-123031408D01* +X165731581Y-123025000D01* +X165650001Y-123025000D01* +X165650000Y-123025001D01* +X165150000Y-123025001D01* +X165149998Y-123024999D01* +X165068434Y-123025000D01* +X165068417Y-123025001D01* +X164997896Y-123031408D01* +X164997890Y-123031410D01* +X164835607Y-123081979D01* +X164835599Y-123081982D01* +X164690127Y-123169924D01* +X164569924Y-123290127D01* +X164481982Y-123435599D01* +X164481979Y-123435607D01* +X164431410Y-123597889D01* +X164431408Y-123597895D01* +X164425000Y-123668418D01* +X162399998Y-123668418D01* +X162399998Y-123668417D01* +X162393591Y-123597896D01* +X162393589Y-123597890D01* +X162343020Y-123435607D01* +X162343017Y-123435599D01* +X162255075Y-123290127D01* +X162134872Y-123169924D01* +X161989400Y-123081982D01* +X161989392Y-123081979D01* +X161827110Y-123031410D01* +X161827104Y-123031408D01* +X161756581Y-123025000D01* +X161675001Y-123025000D01* +X161675000Y-123025001D01* +X161175000Y-123025001D01* +X161174998Y-123024999D01* +X161093434Y-123025000D01* +X161093417Y-123025001D01* +X161022896Y-123031408D01* +X161022890Y-123031410D01* +X160860607Y-123081979D01* +X160860599Y-123081982D01* +X160715127Y-123169924D01* +X160594924Y-123290127D01* +X160506982Y-123435599D01* +X160506979Y-123435607D01* +X160456410Y-123597889D01* +X160456408Y-123597895D01* +X160450000Y-123668418D01* +X132246277Y-123668418D01* +X138141596Y-117773100D01* +X145441650Y-117773100D01* +X145642650Y-117773100D01* +X145657562Y-117777945D01* +X145673243Y-117777945D01* +X145685928Y-117787161D01* +X145700841Y-117792007D01* +X145710057Y-117804692D01* +X145722743Y-117813909D01* +X145727588Y-117828821D01* +X145736805Y-117841507D01* +X145741650Y-117872100D01* +X145741650Y-117974100D01* +X145722743Y-118032291D01* +X145673243Y-118068255D01* +X145642650Y-118073100D01* +X145441650Y-118073100D01* +X145441650Y-118573100D01* +X145642650Y-118573100D01* +X145657562Y-118577945D01* +X145673243Y-118577945D01* +X145685928Y-118587161D01* +X145700841Y-118592007D01* +X145710057Y-118604692D01* +X145722743Y-118613909D01* +X145727588Y-118628821D01* +X145736805Y-118641507D01* +X145741650Y-118672100D01* +X145741650Y-118774100D01* +X145722743Y-118832291D01* +X145673243Y-118868255D01* +X145642650Y-118873100D01* +X145441650Y-118873100D01* +X145441650Y-119073100D01* +X145441651Y-119073100D01* +X146941649Y-119073100D01* +X146941650Y-119073100D01* +X146941650Y-118873100D01* +X146941649Y-118873100D01* +X146740650Y-118873100D01* +X146725738Y-118868255D01* +X146710057Y-118868255D01* +X146697371Y-118859038D01* +X146682459Y-118854193D01* +X146673242Y-118841507D01* +X146660557Y-118832291D01* +X146655711Y-118817378D01* +X146646495Y-118804693D01* +X146641650Y-118774100D01* +X146641650Y-118672100D01* +X146660557Y-118613909D01* +X146710057Y-118577945D01* +X146740650Y-118573100D01* +X146941649Y-118573100D01* +X146941650Y-118573100D01* +X146941650Y-118073100D01* +X146941649Y-118073100D01* +X146740650Y-118073100D01* +X146725738Y-118068255D01* +X146710057Y-118068255D01* +X146697371Y-118059038D01* +X146682459Y-118054193D01* +X146673242Y-118041507D01* +X146660557Y-118032291D01* +X146655711Y-118017378D01* +X146646495Y-118004693D01* +X146641650Y-117974100D01* +X146641650Y-117872100D01* +X146660557Y-117813909D01* +X146710057Y-117777945D01* +X146740650Y-117773100D01* +X146941649Y-117773100D01* +X146941650Y-117773100D01* +X146941650Y-117573100D01* +X145441650Y-117573100D01* +X145441650Y-117773100D01* +X138141596Y-117773100D01* +X142151300Y-113763396D01* +X142205817Y-113735619D01* +X142221304Y-113734400D01* +X169249274Y-113734400D01* +X169307465Y-113753307D01* +X169343429Y-113802807D01* +X169343429Y-113863993D01* +X169335010Y-113882901D01* +X169317452Y-113913311D01* +X169317451Y-113913313D01* +X169317451Y-113913314D01* +X169286750Y-114027891D01* +X169286750Y-114146509D01* +X169317451Y-114261086D01* +X169317452Y-114261088D01* +X169335068Y-114291599D01* +X169347790Y-114351447D01* +X169322904Y-114407343D01* +X169269916Y-114437936D01* +X169249332Y-114440100D01* +X168661778Y-114440100D01* +X168555636Y-114461214D01* +X168555635Y-114461213D01* +X168536112Y-114465097D01* +X168536104Y-114465099D01* +X168417725Y-114514133D01* +X168311183Y-114585321D01* +X165252900Y-117643604D01* +X165245782Y-117647230D01* +X165241087Y-117653693D01* +X165219038Y-117660856D01* +X165198383Y-117671381D01* +X165182896Y-117672600D01* +X165041150Y-117672600D01* +X164982959Y-117653693D01* +X164946995Y-117604193D01* +X164942150Y-117573600D01* +X164942150Y-116708281D01* +X164942149Y-116708272D01* +X164933417Y-116664379D01* +X164933415Y-116664375D01* +X164911355Y-116631360D01* +X164900154Y-116614596D01* +X164883347Y-116603366D01* +X164850374Y-116581334D01* +X164850370Y-116581332D01* +X164806477Y-116572600D01* +X164806470Y-116572600D01* +X162776830Y-116572600D01* +X162776822Y-116572600D01* +X162732929Y-116581332D01* +X162732925Y-116581334D01* +X162683148Y-116614594D01* +X162683144Y-116614598D01* +X162649884Y-116664375D01* +X162649882Y-116664379D01* +X162641150Y-116708272D01* +X162641150Y-119937927D01* +X162649882Y-119981820D01* +X162649883Y-119981822D01* +X162683146Y-120031604D01* +X162732928Y-120064867D01* +X162743977Y-120067064D01* +X162776822Y-120073599D01* +X162776828Y-120073599D01* +X162776830Y-120073600D01* +X162776831Y-120073600D01* +X164806469Y-120073600D01* +X164806470Y-120073600D01* +X164806471Y-120073599D01* +X164806477Y-120073599D01* +X164828273Y-120069262D01* +X164850372Y-120064867D01* +X164900154Y-120031604D01* +X164933417Y-119981822D01* +X164942150Y-119937920D01* +X164942150Y-119072600D01* +X164961057Y-119014409D01* +X165010557Y-118978445D01* +X165041150Y-118973600D01* +X165557418Y-118973600D01* +X165557419Y-118973600D01* +X165683094Y-118948601D01* +X165801477Y-118899565D01* +X165818905Y-118887920D01* +X165908019Y-118828377D01* +X168966300Y-115770096D01* +X169020817Y-115742319D01* +X169036304Y-115741100D01* +X178267997Y-115741100D01* +X178326188Y-115760007D01* +X178362152Y-115809507D01* +X178362152Y-115870693D01* +X178356937Y-115883581D01* +X178326078Y-115946703D01* +X178326077Y-115946705D01* +X178326077Y-115946707D01* +X178316150Y-116014840D01* +X178316150Y-116631360D01* +X178319216Y-116652400D01* +X178326077Y-116699495D01* +X178365512Y-116780160D01* +X178377452Y-116804583D01* +X178460167Y-116887298D01* +X178491681Y-116902704D01* +X178565254Y-116938672D01* +X178565255Y-116938672D01* +X178565257Y-116938673D01* +X178633390Y-116948600D01* +X178633393Y-116948600D01* +X179096881Y-116948600D01* +X179155072Y-116967507D01* +X179166885Y-116977596D01* +X179794653Y-117605364D01* +X179794654Y-117605364D01* +X179794655Y-117605365D01* +X179886721Y-117643500D01* +X179886722Y-117643500D01* +X200301579Y-117643500D01* +X200368225Y-117615894D01* +X200393647Y-117605364D01* +X203853545Y-114145464D01* +X203853547Y-114145464D01* +X203924014Y-114074997D01* +X203939810Y-114036860D01* +X203962151Y-113982927D01* +X203962151Y-113883272D01* +X203962151Y-113875298D01* +X203962150Y-113875284D01* +X203962150Y-111888271D01* +X203924015Y-111796205D01* +X203924014Y-111796204D01* +X203924014Y-111796203D01* +X203853547Y-111725736D01* +X203853545Y-111725735D01* +X203853544Y-111725734D01* +X203761479Y-111687600D01* +X203761478Y-111687600D01* +X201270272Y-111687600D01* +X201212081Y-111668693D01* +X201179707Y-111628587D01* +X201173856Y-111615335D01* +X201094415Y-111535894D01* +X200991641Y-111490515D01* +X200991640Y-111490514D01* +X200991638Y-111490514D01* +X200966518Y-111487600D01* +X199226789Y-111487600D01* +X199226786Y-111487601D01* +X199201659Y-111490514D01* +X199098885Y-111535894D01* +X199019444Y-111615335D01* +X198974064Y-111718111D01* +X198971150Y-111743230D01* +X198971150Y-112132960D01* +X198971151Y-112132963D01* +X198974064Y-112158090D01* +X198993460Y-112202017D01* +X199019444Y-112260865D01* +X199098885Y-112340306D01* +X199201659Y-112385685D01* +X199226785Y-112388600D01* +X199879033Y-112388599D01* +X199937223Y-112407506D01* +X199973187Y-112457006D01* +X199973187Y-112518192D01* +X199937223Y-112567692D01* +X199911328Y-112580568D01* +X199911399Y-112580738D01* +X199908941Y-112581756D01* +X199907783Y-112582332D01* +X199906914Y-112582595D01* +X199788524Y-112631634D01* +X199788515Y-112631638D01* +X199681982Y-112702822D01* +X199656199Y-112728605D01* +X199601682Y-112756381D01* +X199586197Y-112757600D01* +X199226789Y-112757600D01* +X199226786Y-112757601D01* +X199201659Y-112760514D01* +X199098885Y-112805894D01* +X199019444Y-112885335D01* +X198974064Y-112988111D01* +X198971150Y-113013230D01* +X198971150Y-113402960D01* +X198971151Y-113402963D01* +X198974064Y-113428090D01* +X198992079Y-113468889D01* +X199019444Y-113530865D01* +X199098885Y-113610306D01* +X199201659Y-113655685D01* +X199226785Y-113658600D01* +X199586196Y-113658599D01* +X199587421Y-113658997D01* +X199588656Y-113658630D01* +X199596049Y-113661800D01* +X199644387Y-113677506D01* +X199646359Y-113678977D01* +X199651567Y-113682962D01* +X199681981Y-113713376D01* +X199755571Y-113762547D01* +X199758093Y-113764477D01* +X199773743Y-113787184D01* +X199790811Y-113808834D01* +X199790940Y-113812134D01* +X199792816Y-113814855D01* +X199792130Y-113842420D01* +X199793213Y-113869972D01* +X199791377Y-113872719D01* +X199791295Y-113876021D01* +X199774542Y-113897914D01* +X199759220Y-113920846D01* +X199754211Y-113924484D01* +X199754113Y-113924613D01* +X199753980Y-113924652D01* +X199752932Y-113925414D01* +X199681982Y-113972821D01* +X199656198Y-113998605D01* +X199601681Y-114026381D01* +X199586196Y-114027600D01* +X199226789Y-114027600D01* +X199226786Y-114027601D01* +X199201659Y-114030514D01* +X199098885Y-114075894D01* +X199019444Y-114155335D01* +X198974064Y-114258111D01* +X198971150Y-114283230D01* +X198971150Y-114642644D01* +X198952243Y-114700835D01* +X198942154Y-114712647D01* +X198307400Y-115347403D01* +X198252883Y-115375181D01* +X198237396Y-115376400D01* +X193138807Y-115376400D01* +X193080616Y-115357493D01* +X193044652Y-115307993D01* +X193044652Y-115246807D01* +X193080616Y-115197307D01* +X193113181Y-115181774D01* +X193150036Y-115171899D01* +X193150038Y-115171897D01* +X193150040Y-115171897D01* +X193252758Y-115112592D01* +X193252758Y-115112591D01* +X193252763Y-115112589D01* +X193333757Y-115031594D01* +X193388272Y-115003819D01* +X193403759Y-115002600D01* +X194922479Y-115002600D01* +X194991283Y-114974100D01* +X195014547Y-114964464D01* +X195021416Y-114957595D01* +X195075933Y-114929818D01* +X195091420Y-114928599D01* +X196016511Y-114928599D01* +X196016514Y-114928599D01* +X196041641Y-114925685D01* +X196144415Y-114880306D01* +X196223856Y-114800865D01* +X196269235Y-114698091D01* +X196272150Y-114672965D01* +X196272149Y-114283236D01* +X196269235Y-114258109D01* +X196223856Y-114155335D01* +X196144415Y-114075894D01* +X196041641Y-114030515D01* +X196041640Y-114030514D01* +X196041638Y-114030514D01* +X196016519Y-114027600D01* +X195195774Y-114027600D01* +X195137583Y-114008693D01* +X195101619Y-113959193D01* +X195101619Y-113898007D01* +X195137583Y-113848507D01* +X195146257Y-113842874D01* +X195154371Y-113838190D01* +X195238340Y-113754221D01* +X195238340Y-113754220D01* +X195304965Y-113687595D01* +X195359482Y-113659818D01* +X195374969Y-113658599D01* +X196016511Y-113658599D01* +X196016514Y-113658599D01* +X196041641Y-113655685D01* +X196144415Y-113610306D01* +X196223856Y-113530865D01* +X196269235Y-113428091D01* +X196272150Y-113402965D01* +X196272149Y-113013236D01* +X196269235Y-112988109D01* +X196223856Y-112885335D01* +X196144415Y-112805894D01* +X196041641Y-112760515D01* +X196041640Y-112760514D01* +X196041638Y-112760514D01* +X196016519Y-112757600D01* +X196016515Y-112757600D01* +X195207892Y-112757600D01* +X195206025Y-112757100D01* +X195087275Y-112757100D01* +X195085406Y-112757600D01* +X194920418Y-112757600D01* +X194862227Y-112738693D01* +X194826263Y-112689193D01* +X194826263Y-112628007D01* +X194850414Y-112588596D01* +X195021415Y-112417595D01* +X195075932Y-112389818D01* +X195091419Y-112388599D01* +X196016511Y-112388599D01* +X196016514Y-112388599D01* +X196041641Y-112385685D01* +X196144415Y-112340306D01* +X196223856Y-112260865D01* +X196269235Y-112158091D01* +X196272150Y-112132965D01* +X196272149Y-111743236D01* +X196269235Y-111718109D01* +X196223856Y-111615335D01* +X196192182Y-111583661D01* +X196164407Y-111529147D01* +X196173978Y-111468715D01* +X196217243Y-111425450D01* +X196226163Y-111421919D01* +X196226135Y-111421854D01* +X196231851Y-111419380D01* +X196373202Y-111335785D01* +X196489335Y-111219652D01* +X196572930Y-111078301D01* +X196572931Y-111078298D01* +X196587190Y-111029220D01* +X196621581Y-110978614D01* +X196679149Y-110957888D01* +X196710477Y-110963609D01* +X196710796Y-110962419D01* +X196717062Y-110964098D01* +X196717064Y-110964099D01* +X196831641Y-110994800D01* +X196831643Y-110994800D01* +X196950257Y-110994800D01* +X196950259Y-110994800D01* +X197064836Y-110964099D01* +X197120668Y-110931863D01* +X197170169Y-110918600D01* +X198923028Y-110918600D01* +X198981219Y-110937507D01* +X199013592Y-110977612D01* +X199019444Y-110990865D01* +X199098885Y-111070306D01* +X199201659Y-111115685D01* +X199226785Y-111118600D01* +X200966514Y-111118599D01* +X200991641Y-111115685D01* +X201094415Y-111070306D01* +X201173856Y-110990865D01* +X201219235Y-110888091D01* +X201222150Y-110862965D01* +X201222149Y-110473236D01* +X201219235Y-110448109D01* +X201173856Y-110345335D01* +X201173855Y-110345334D01* +X201170150Y-110336943D01* +X201172179Y-110336046D01* +X201158427Y-110289360D01* +X201178938Y-110231714D01* +X201229414Y-110197135D01* +X201257389Y-110193100D01* +X204960696Y-110193100D01* +X205018887Y-110212007D01* +X205030700Y-110222096D01* +X206481700Y-111673096D01* +X206509477Y-111727613D01* +X206499906Y-111788045D01* +X206481700Y-111813103D01* +X205050080Y-113244723D01* +X205050080Y-113244724D01* +X200203300Y-118091504D01* +X200148783Y-118119281D01* +X200133296Y-118120500D01* +X185979680Y-118120500D01* +X185977549Y-118120924D01* +X185854006Y-118145499D01* +X185854005Y-118145499D01* +X185854002Y-118145500D01* +X185735623Y-118194534D01* +X185629084Y-118265720D01* +X182551198Y-121343604D01* +X182496681Y-121371381D01* +X182481194Y-121372600D01* +X180960128Y-121372600D01* +X180960126Y-121372601D01* +X180866350Y-121387452D01* +X180866345Y-121387454D01* +X180753309Y-121445049D01* +X180753308Y-121445050D01* +X180663600Y-121534758D01* +X180620907Y-121618546D01* +X180577644Y-121661810D01* +X180532699Y-121672600D01* +X177603804Y-121672600D01* +X177545613Y-121653693D01* +X177533800Y-121643604D01* +X175743018Y-119852822D01* +X173708019Y-117817823D01* +X173708015Y-117817820D01* +X173601476Y-117746634D01* +X173483097Y-117697600D01* +X173483095Y-117697599D01* +X173483094Y-117697599D01* +X173357419Y-117672600D01* +X172841150Y-117672600D01* +X172782959Y-117653693D01* +X172746995Y-117604193D01* +X172742150Y-117573600D01* +X172742150Y-116708281D01* +X172742149Y-116708272D01* +X172733417Y-116664379D01* +X172733415Y-116664375D01* +X172711355Y-116631360D01* +X172700154Y-116614596D01* +X172683347Y-116603366D01* +X172650374Y-116581334D01* +X172650370Y-116581332D01* +X172606477Y-116572600D01* +X172606470Y-116572600D01* +X170576830Y-116572600D01* +X170576822Y-116572600D01* +X170532929Y-116581332D01* +X170532925Y-116581334D01* +X170483148Y-116614594D01* +X170483144Y-116614598D01* +X170449884Y-116664375D01* +X170449882Y-116664379D01* +X170441150Y-116708272D01* +X170441150Y-119937927D01* +X170449882Y-119981820D01* +X170449883Y-119981822D01* +X170483146Y-120031604D01* +X170532928Y-120064867D01* +X170543977Y-120067064D01* +X170576822Y-120073599D01* +X170576828Y-120073599D01* +X170576830Y-120073600D01* +X170576831Y-120073600D01* +X172606469Y-120073600D01* +X172606470Y-120073600D01* +X172606471Y-120073599D01* +X172606477Y-120073599D01* +X172628273Y-120069262D01* +X172650372Y-120064867D01* +X172700154Y-120031604D01* +X172733417Y-119981822D01* +X172742150Y-119937920D01* +X172742150Y-119072600D01* +X172746995Y-119057688D01* +X172746995Y-119042007D01* +X172756211Y-119029321D01* +X172761057Y-119014409D01* +X172773742Y-119005192D01* +X172782959Y-118992507D01* +X172797871Y-118987661D01* +X172810557Y-118978445D01* +X172841150Y-118973600D01* +X172982896Y-118973600D01* +X173041087Y-118992507D01* +X173052900Y-119002596D01* +X176878680Y-122828376D01* +X176985223Y-122899565D01* +X177103606Y-122948601D01* +X177229281Y-122973600D01* +X180532699Y-122973600D01* +X180590890Y-122992507D01* +X180620907Y-123027652D01* +X180663600Y-123111442D01* +X180753308Y-123201150D01* +X180866346Y-123258746D01* +X180960131Y-123273600D01* +X184023168Y-123273599D01* +X184023171Y-123273599D01* +X184023172Y-123273598D01* +X184070061Y-123266172D01* +X184116949Y-123258747D01* +X184116949Y-123258746D01* +X184116954Y-123258746D01* +X184229992Y-123201150D01* +X184319700Y-123111442D01* +X184377296Y-122998404D01* +X184392150Y-122904619D01* +X184392149Y-122573101D01* +X185641651Y-122573101D01* +X185641651Y-122923086D01* +X185652142Y-123025787D01* +X185652145Y-123025799D01* +X185707293Y-123192224D01* +X185799330Y-123341440D01* +X185923309Y-123465419D01* +X186072525Y-123557456D01* +X186238956Y-123612606D01* +X186341662Y-123623099D01* +X187641648Y-123623099D01* +X187641650Y-123623098D01* +X187641650Y-122573101D01* +X188141650Y-122573101D01* +X188141650Y-123623098D01* +X188141651Y-123623099D01* +X189441636Y-123623099D01* +X189544337Y-123612607D01* +X189544349Y-123612604D01* +X189710774Y-123557456D01* +X189859990Y-123465419D01* +X189983969Y-123341440D01* +X190076006Y-123192224D01* +X190131156Y-123025793D01* +X190141650Y-122923087D01* +X190141650Y-122573101D01* +X190141649Y-122573100D01* +X188141651Y-122573100D01* +X188141650Y-122573101D01* +X187641650Y-122573101D01* +X187641649Y-122573100D01* +X185641652Y-122573100D01* +X185641651Y-122573101D01* +X184392149Y-122573101D01* +X184392149Y-122308747D01* +X184392149Y-121741582D01* +X184391279Y-121736090D01* +X184391279Y-121736086D01* +X184389224Y-121723112D01* +X185641650Y-121723112D01* +X185641650Y-122073099D01* +X185641651Y-122073100D01* +X187641649Y-122073100D01* +X187641650Y-122073099D01* +X187641650Y-121023101D01* +X188141650Y-121023101D01* +X188141650Y-122073099D01* +X188141651Y-122073100D01* +X190141648Y-122073100D01* +X190141649Y-122073099D01* +X190141649Y-121723113D01* +X190131157Y-121620412D01* +X190131154Y-121620400D01* +X190076006Y-121453975D01* +X189983969Y-121304759D01* +X189859990Y-121180780D01* +X189710774Y-121088743D01* +X189544343Y-121033593D01* +X189441637Y-121023100D01* +X188141651Y-121023100D01* +X188141650Y-121023101D01* +X187641650Y-121023101D01* +X187641649Y-121023100D01* +X186341663Y-121023100D01* +X186238962Y-121033592D01* +X186238950Y-121033595D01* +X186072525Y-121088743D01* +X185923309Y-121180780D01* +X185799330Y-121304759D01* +X185707293Y-121453975D01* +X185652143Y-121620406D01* +X185641650Y-121723112D01* +X184389224Y-121723112D01* +X184377297Y-121647800D01* +X184377296Y-121647798D01* +X184377296Y-121647796D01* +X184319700Y-121534758D01* +X184319698Y-121534756D01* +X184319003Y-121533800D01* +X184318635Y-121532670D01* +X184316163Y-121527817D01* +X184316931Y-121527425D01* +X184300095Y-121475609D01* +X184319002Y-121417418D01* +X184329085Y-121405610D01* +X186284200Y-119450496D01* +X186338717Y-119422719D01* +X186354204Y-119421500D01* +X200507818Y-119421500D01* +X200507819Y-119421500D01* +X200633494Y-119396501D01* +X200751877Y-119347465D01* +X200858419Y-119276277D01* +X201561597Y-118573099D01* +X208714418Y-118573099D01* +X208714419Y-118573100D01* +X209758638Y-118573100D01* +X209725725Y-118630107D01* +X209691650Y-118757274D01* +X209691650Y-118888926D01* +X209725725Y-119016093D01* +X209758638Y-119073100D01* +X208714419Y-119073100D01* +X208724891Y-119139222D01* +X208790554Y-119341315D01* +X208887025Y-119530652D01* +X209011927Y-119702564D01* +X209162185Y-119852822D01* +X209334097Y-119977724D01* +X209523436Y-120074196D01* +X209693478Y-120129445D01* +X209742978Y-120165409D01* +X209761886Y-120223599D01* +X209742979Y-120281790D01* +X209693479Y-120317754D01* +X209662886Y-120322600D01* +X209410128Y-120322600D01* +X209410126Y-120322601D01* +X209316350Y-120337452D01* +X209316345Y-120337454D01* +X209203309Y-120395049D01* +X209113599Y-120484759D01* +X209056004Y-120597795D01* +X209041150Y-120691578D01* +X209041150Y-121954621D01* +X209041151Y-121954623D01* +X209056002Y-122048399D01* +X209056004Y-122048404D01* +X209113600Y-122161442D01* +X209203308Y-122251150D01* +X209316346Y-122308746D01* +X209410131Y-122323600D01* +X210973168Y-122323599D01* +X210973171Y-122323599D01* +X210973172Y-122323598D01* +X211020061Y-122316172D01* +X211066949Y-122308747D01* +X211066949Y-122308746D01* +X211066954Y-122308746D01* +X211179992Y-122251150D01* +X211269700Y-122161442D01* +X211327296Y-122048404D01* +X211342150Y-121954619D01* +X211342149Y-120691582D01* +X211342149Y-120691581D01* +X211342149Y-120691578D01* +X211342148Y-120691576D01* +X211327297Y-120597800D01* +X211327296Y-120597798D01* +X211327296Y-120597796D01* +X211269700Y-120484758D01* +X211179992Y-120395050D01* +X211066954Y-120337454D01* +X211066955Y-120337454D01* +X210973172Y-120322600D01* +X210720416Y-120322600D01* +X210662225Y-120303693D01* +X210626261Y-120254193D01* +X210626261Y-120193007D01* +X210662225Y-120143507D01* +X210689824Y-120129445D01* +X210859863Y-120074196D01* +X211049202Y-119977724D01* +X211221114Y-119852822D01* +X211371372Y-119702564D01* +X211496274Y-119530652D01* +X211592745Y-119341315D01* +X211658408Y-119139222D01* +X211668881Y-119073100D01* +X210624662Y-119073100D01* +X210657575Y-119016093D01* +X210691650Y-118888926D01* +X210691650Y-118757274D01* +X210657575Y-118630107D01* +X210624662Y-118573100D01* +X211668881Y-118573100D01* +X211668881Y-118573099D01* +X211658408Y-118506977D01* +X211592745Y-118304884D01* +X211496274Y-118115547D01* +X211371372Y-117943635D01* +X211221114Y-117793377D01* +X211049202Y-117668475D01* +X210859865Y-117572004D01* +X210657771Y-117506340D01* +X210447900Y-117473100D01* +X210441651Y-117473100D01* +X210441650Y-117473101D01* +X210441650Y-118390088D01* +X210384643Y-118357175D01* +X210257476Y-118323100D01* +X210125824Y-118323100D01* +X209998657Y-118357175D01* +X209941650Y-118390088D01* +X209941650Y-117473101D01* +X209941649Y-117473100D01* +X209935400Y-117473100D01* +X209725528Y-117506340D01* +X209523434Y-117572004D01* +X209334097Y-117668475D01* +X209162185Y-117793377D01* +X209011927Y-117943635D01* +X208887025Y-118115547D01* +X208790554Y-118304884D01* +X208724891Y-118506977D01* +X208714418Y-118573099D01* +X201561597Y-118573099D01* +X205705200Y-114429496D01* +X205759717Y-114401719D01* +X205775204Y-114400500D01* +X209614068Y-114400500D01* +X209614069Y-114400500D01* +X209739744Y-114375501D01* +X209858127Y-114326465D01* +X209964669Y-114255276D01* +X210055276Y-114164669D01* +X210126465Y-114058127D01* +X210175501Y-113939744D01* +X210200500Y-113814069D01* +X210200500Y-113685931D01* +X210175501Y-113560256D01* +X210126465Y-113441873D01* +X210126463Y-113441870D01* +X210126461Y-113441866D01* +X210096950Y-113397700D01* +X210055276Y-113335331D01* +X209964669Y-113244724D01* +X209901677Y-113202634D01* +X209858133Y-113173538D01* +X209858125Y-113173534D01* +X209739747Y-113124500D01* +X209739745Y-113124499D01* +X209739744Y-113124499D01* +X209614069Y-113099500D01* +X207274203Y-113099500D01* +X207216012Y-113080593D01* +X207180048Y-113031093D01* +X207180048Y-112969907D01* +X207204199Y-112930497D01* +X207878165Y-112256529D01* +X207886316Y-112248378D01* +X207886319Y-112248377D01* +X207976927Y-112157769D01* +X208048115Y-112051227D01* +X208097151Y-111932844D01* +X208122149Y-111807169D01* +X208122149Y-111679031D01* +X208097151Y-111553356D01* +X208066679Y-111479791D01* +X208048116Y-111434975D01* +X208039392Y-111421919D01* +X207976927Y-111328431D01* +X205685819Y-109037323D01* +X205682754Y-109035275D01* +X205579276Y-108966134D01* +X205460892Y-108917098D01* +X205460887Y-108917097D01* +X205455873Y-108916099D01* +X205455873Y-108916100D01* +X205335221Y-108892100D01* +X205335219Y-108892100D01* +X200944250Y-108892100D01* +X200886059Y-108873193D01* +X200850095Y-108823693D01* +X200845250Y-108793100D01* +X200845250Y-103549432D01* +X200845250Y-103549431D01* +X200820251Y-103423756D01* +X200771215Y-103305373D01* +X200771213Y-103305370D01* +X200771211Y-103305366D01* +X200738078Y-103255780D01* +X200700026Y-103198831D01* +X200609419Y-103108224D01* +X200103791Y-102602596D01* +X199594480Y-102093284D01* +X199568976Y-102049344D01* +X199567149Y-102042649D01* +X199567149Y-102041582D01* +X199552296Y-101947796D01* +X199528541Y-101901175D01* +X199525864Y-101891364D01* +X199526862Y-101870469D01* +X199523591Y-101849814D01* +X199528290Y-101840590D01* +X199528785Y-101830248D01* +X199541872Y-101813932D01* +X199551368Y-101795297D01* +X199560592Y-101790596D01* +X199567071Y-101782521D01* +X199587247Y-101777014D01* +X199605884Y-101767519D01* +X199621372Y-101766300D01* +X202147242Y-101766300D01* +X202205433Y-101785207D01* +X202217246Y-101795296D01* +X209037154Y-108615204D01* +X209064931Y-108669721D01* +X209066150Y-108685208D01* +X209066150Y-108954620D01* +X209066151Y-108954623D01* +X209081002Y-109048399D01* +X209081004Y-109048404D01* +X209138600Y-109161442D01* +X209228308Y-109251150D01* +X209341346Y-109308746D01* +X209435131Y-109323600D01* +X210948168Y-109323599D01* +X210948171Y-109323599D01* +X210948172Y-109323598D01* +X210995061Y-109316172D01* +X211041949Y-109308747D01* +X211041949Y-109308746D01* +X211041954Y-109308746D01* +X211154992Y-109251150D01* +X211244700Y-109161442D01* +X211302296Y-109048404D01* +X211317150Y-108954619D01* +X211317149Y-107691582D01* +X211317149Y-107691578D01* +X211317148Y-107691576D01* +X211302297Y-107597800D01* +X211302296Y-107597798D01* +X211302296Y-107597796D01* +X211244700Y-107484758D01* +X211154992Y-107395050D01* +X211041954Y-107337454D01* +X211041955Y-107337454D01* +X210948172Y-107322600D01* +X210948169Y-107322600D01* +X210695417Y-107322600D01* +X210637226Y-107303693D01* +X210601262Y-107254193D01* +X210601262Y-107193007D01* +X210637226Y-107143507D01* +X210664824Y-107129445D01* +X210834865Y-107074195D01* +X211024202Y-106977724D01* +X211196114Y-106852822D01* +X211346372Y-106702564D01* +X211471274Y-106530652D01* +X211567745Y-106341315D01* +X211633408Y-106139222D01* +X211643881Y-106073100D01* +X210595796Y-106073100D01* +X210634280Y-106006443D01* +X210666650Y-105885635D01* +X210666650Y-105760565D01* +X210634280Y-105639757D01* +X210595796Y-105573100D01* +X211643881Y-105573100D01* +X211643881Y-105573099D01* +X211633408Y-105506977D01* +X211567745Y-105304884D01* +X211471274Y-105115547D01* +X211346372Y-104943635D01* +X211196114Y-104793377D01* +X211024202Y-104668475D01* +X210834865Y-104572004D01* +X210632772Y-104506341D01* +X210547742Y-104492873D01* +X210493226Y-104465095D01* +X210465449Y-104410578D01* +X210475021Y-104350146D01* +X210518286Y-104306882D01* +X210543913Y-104297995D01* +X210608485Y-104285151D01* +X210790564Y-104209732D01* +X210954432Y-104100239D01* +X211093789Y-103960882D01* +X211203282Y-103797014D01* +X211278701Y-103614935D01* +X211317150Y-103421641D01* +X211317150Y-103224559D01* +X211278701Y-103031265D01* +X211203282Y-102849186D01* +X211093789Y-102685318D01* +X210954432Y-102545961D01* +X210844938Y-102472799D01* +X210790563Y-102436467D01* +X210608485Y-102361049D01* +X210415193Y-102322600D01* +X210415191Y-102322600D01* +X209968109Y-102322600D01* +X209968106Y-102322600D01* +X209774815Y-102361049D01* +X209774813Y-102361049D01* +X209592736Y-102436467D01* +X209428868Y-102545961D01* +X209428864Y-102545964D01* +X209289514Y-102685314D01* +X209289511Y-102685318D01* +X209180017Y-102849186D01* +X209104599Y-103031263D01* +X209104599Y-103031265D01* +X209066150Y-103224556D01* +X209066150Y-103421643D01* +X209076640Y-103474376D01* +X209103418Y-103609000D01* +X209104599Y-103614934D01* +X209104599Y-103614936D01* +X209180017Y-103797013D01* +X209189489Y-103811189D01* +X209289511Y-103960882D01* +X209428868Y-104100239D01* +X209592736Y-104209732D01* +X209774815Y-104285151D01* +X209839384Y-104297994D01* +X209892767Y-104327891D01* +X209918383Y-104383456D01* +X209906446Y-104443465D01* +X209861517Y-104484998D01* +X209835557Y-104492873D01* +X209750527Y-104506341D01* +X209548434Y-104572004D01* +X209359097Y-104668475D01* +X209187185Y-104793377D01* +X209036927Y-104943635D01* +X208912025Y-105115547D01* +X208815554Y-105304884D01* +X208749891Y-105506977D01* +X208742827Y-105551576D01* +X208715049Y-105606092D01* +X208660532Y-105633869D01* +X208600100Y-105624297D01* +X208575042Y-105606092D01* +X205856248Y-102887298D01* +X203135286Y-100166336D01* +X203070578Y-100123100D01* +X203070578Y-100123099D01* +X202987800Y-100067788D01* +X202987794Y-100067785D01* +X202895554Y-100029579D01* +X202823919Y-99999906D01* +X202823913Y-99999904D01* +X202649944Y-99965300D01* +X202649942Y-99965300D01* +X202649941Y-99965300D01* +X177276042Y-99965300D01* +X177098658Y-99965300D01* +X177098655Y-99965300D01* +X176924686Y-99999904D01* +X176924680Y-99999906D01* +X176853046Y-100029579D01* +X176853045Y-100029579D01* +X176760805Y-100067785D01* +X176760799Y-100067788D01* +X176678022Y-100123099D01* +X176678022Y-100123100D01* +X176613317Y-100166333D01* +X172911154Y-103868496D01* +X172856637Y-103896273D01* +X172796205Y-103886702D01* +X172752940Y-103843437D01* +X172742150Y-103798492D01* +X172742150Y-103208281D01* +X172742149Y-103208272D01* +X172733780Y-103166202D01* +X172733417Y-103164378D01* +X172700154Y-103114596D01* +X172690618Y-103108224D01* +X172650374Y-103081334D01* +X172650370Y-103081332D01* +X172606477Y-103072600D01* +X172606470Y-103072600D01* +X170576830Y-103072600D01* +X170576822Y-103072600D01* +X170532929Y-103081332D01* +X170532925Y-103081334D01* +X170483148Y-103114594D01* +X170483144Y-103114598D01* +X170449884Y-103164375D01* +X170449882Y-103164379D01* +X170441150Y-103208272D01* +X170441150Y-103823600D01* +X170422243Y-103881791D01* +X170372743Y-103917755D01* +X170342150Y-103922600D01* +X169551256Y-103922600D01* +X169377286Y-103957204D01* +X169377280Y-103957206D01* +X169273508Y-104000191D01* +X169273507Y-104000191D01* +X169213405Y-104025085D01* +X169213404Y-104025085D01* +X169073139Y-104118809D01* +X169073138Y-104118810D01* +X169065914Y-104123636D01* +X166702746Y-106486804D01* +X166648229Y-106514581D01* +X166632742Y-106515800D01* +X165041150Y-106515800D01* +X164982959Y-106496893D01* +X164946995Y-106447393D01* +X164942150Y-106416800D01* +X164942150Y-103208281D01* +X164942149Y-103208272D01* +X164933780Y-103166202D01* +X164933417Y-103164378D01* +X164900154Y-103114596D01* +X164890618Y-103108224D01* +X164850374Y-103081334D01* +X164850370Y-103081332D01* +X164806477Y-103072600D01* +X164806470Y-103072600D01* +X164791150Y-103072600D01* +X164732959Y-103053693D01* +X164696995Y-103004193D01* +X164692150Y-102973600D01* +X164692150Y-98400091D01* +X175233450Y-98400091D01* +X175233450Y-98518709D01* +X175248972Y-98576636D01* +X175264152Y-98633290D01* +X175323457Y-98736008D01* +X175323459Y-98736010D01* +X175323461Y-98736013D01* +X175407337Y-98819889D01* +X175407339Y-98819890D01* +X175407341Y-98819892D01* +X175510060Y-98879197D01* +X175510061Y-98879197D01* +X175510064Y-98879199D01* +X175624641Y-98909900D01* +X175624643Y-98909900D01* +X175743257Y-98909900D01* +X175743259Y-98909900D01* +X175857836Y-98879199D01* +X175857838Y-98879197D01* +X175857840Y-98879197D01* +X175960558Y-98819892D01* +X175960558Y-98819891D01* +X175960563Y-98819889D01* +X176044439Y-98736013D01* +X176052777Y-98721572D01* +X176103747Y-98633290D01* +X176103747Y-98633288D01* +X176103749Y-98633286D01* +X176134450Y-98518709D01* +X176134450Y-98400091D01* +X176103749Y-98285514D01* +X176103747Y-98285511D01* +X176103747Y-98285509D01* +X176044442Y-98182791D01* +X176044440Y-98182789D01* +X176044439Y-98182787D01* +X175960563Y-98098911D01* +X175960560Y-98098909D01* +X175960558Y-98098907D01* +X175857839Y-98039602D01* +X175857840Y-98039602D01* +X175838773Y-98034493D01* +X175743259Y-98008900D01* +X175624641Y-98008900D01* +X175561458Y-98025830D01* +X175510059Y-98039602D01* +X175407341Y-98098907D01* +X175323457Y-98182791D01* +X175264152Y-98285509D01* +X175255875Y-98316400D01* +X175233450Y-98400091D01* +X164692150Y-98400091D01* +X164692150Y-92730622D01* +X173016650Y-92730622D01* +X173016650Y-92915577D01* +X173045582Y-93098243D01* +X173102734Y-93274141D01* +X173186696Y-93438927D01* +X173186701Y-93438935D01* +X173201664Y-93459529D01* +X173791650Y-92869543D01* +X173791650Y-92875761D01* +X173818909Y-92977494D01* +X173871570Y-93068706D01* +X173946044Y-93143180D01* +X174037256Y-93195841D01* +X174138989Y-93223100D01* +X174145202Y-93223100D01* +X173555218Y-93813084D01* +X173575814Y-93828048D01* +X173575822Y-93828053D01* +X173740608Y-93912015D01* +X173916506Y-93969167D01* +X174099173Y-93998100D01* +X174284127Y-93998100D01* +X174466793Y-93969167D01* +X174642691Y-93912015D01* +X174807487Y-93828047D01* +X174828080Y-93813084D01* +X174238096Y-93223100D01* +X174244311Y-93223100D01* +X174346044Y-93195841D01* +X174437256Y-93143180D01* +X174511730Y-93068706D01* +X174564391Y-92977494D01* +X174591650Y-92875761D01* +X174591650Y-92869546D01* +X175181634Y-93459530D01* +X175196597Y-93438937D01* +X175280565Y-93274141D01* +X175337717Y-93098243D01* +X175366650Y-92915577D01* +X175366650Y-92730622D01* +X195366650Y-92730622D01* +X195366650Y-92915577D01* +X195395582Y-93098243D01* +X195452734Y-93274141D01* +X195536696Y-93438927D01* +X195536701Y-93438935D01* +X195551664Y-93459529D01* +X196141650Y-92869543D01* +X196141650Y-92875761D01* +X196168909Y-92977494D01* +X196221570Y-93068706D01* +X196296044Y-93143180D01* +X196387256Y-93195841D01* +X196488989Y-93223100D01* +X196495202Y-93223100D01* +X195905218Y-93813084D01* +X195925814Y-93828048D01* +X195925822Y-93828053D01* +X196090608Y-93912015D01* +X196266506Y-93969167D01* +X196449173Y-93998100D01* +X196634127Y-93998100D01* +X196816793Y-93969167D01* +X196992691Y-93912015D01* +X197157487Y-93828047D01* +X197178080Y-93813084D01* +X196588096Y-93223100D01* +X196594311Y-93223100D01* +X196696044Y-93195841D01* +X196787256Y-93143180D01* +X196861730Y-93068706D01* +X196914391Y-92977494D01* +X196941650Y-92875761D01* +X196941650Y-92869546D01* +X197531634Y-93459530D01* +X197546597Y-93438937D01* +X197630565Y-93274141D01* +X197687717Y-93098243D01* +X197716650Y-92915577D01* +X197716650Y-92730622D01* +X197687717Y-92547956D01* +X197630565Y-92372058D01* +X197621333Y-92353938D01* +X197619327Y-92350001D01* +X201175000Y-92350001D01* +X201175000Y-92605816D01* +X201185406Y-92707670D01* +X201240095Y-92872712D01* +X201331368Y-93020688D01* +X201454311Y-93143631D01* +X201602287Y-93234904D01* +X201767329Y-93289593D01* +X201869184Y-93300000D01* +X201912499Y-93300000D01* +X201912500Y-93299999D01* +X201912500Y-92350001D01* +X202412500Y-92350001D01* +X202412500Y-93299999D01* +X202412501Y-93300000D01* +X202455816Y-93300000D01* +X202557670Y-93289593D01* +X202722712Y-93234904D01* +X202870688Y-93143631D01* +X202993631Y-93020688D01* +X203084904Y-92872712D01* +X203139593Y-92707670D01* +X203150000Y-92605816D01* +X203150000Y-92350001D01* +X203149999Y-92350000D01* +X202412501Y-92350000D01* +X202412500Y-92350001D01* +X201912500Y-92350001D01* +X201912499Y-92350000D01* +X201175001Y-92350000D01* +X201175000Y-92350001D01* +X197619327Y-92350001D01* +X197546603Y-92207272D01* +X197546598Y-92207264D01* +X197531634Y-92186668D01* +X196941650Y-92776652D01* +X196941650Y-92770439D01* +X196914391Y-92668706D01* +X196861730Y-92577494D01* +X196787256Y-92503020D01* +X196696044Y-92450359D01* +X196594311Y-92423100D01* +X196588094Y-92423100D01* +X197178080Y-91833114D01* +X197157485Y-91818151D01* +X197157477Y-91818146D01* +X196992693Y-91734185D01* +X196965643Y-91725396D01* +X196951427Y-91715067D01* +X196934945Y-91708987D01* +X196927290Y-91697531D01* +X196916143Y-91689432D01* +X196910713Y-91672720D01* +X196900953Y-91658113D01* +X196901493Y-91644345D01* +X196897236Y-91631241D01* +X196902665Y-91614531D01* +X196903355Y-91596975D01* +X196905556Y-91594183D01* +X201175000Y-91594183D01* +X201175000Y-91849999D01* +X201175001Y-91850000D01* +X201912499Y-91850000D01* +X201912500Y-91849999D01* +X201912500Y-90900001D01* +X202412500Y-90900001D01* +X202412500Y-91849999D01* +X202412501Y-91850000D01* +X203149999Y-91850000D01* +X203150000Y-91849999D01* +X203150000Y-91612721D01* +X203399500Y-91612721D01* +X203399500Y-92587278D01* +X203407781Y-92639562D01* +X203413234Y-92673994D01* +X203414122Y-92679597D01* +X203414123Y-92679601D01* +X203455377Y-92760565D01* +X203470820Y-92790873D01* +X203559127Y-92879180D01* +X203559129Y-92879181D01* +X203559128Y-92879181D01* +X203659455Y-92930300D01* +X203670402Y-92935878D01* +X203732985Y-92945789D01* +X203762721Y-92950500D01* +X203762724Y-92950500D01* +X204312279Y-92950500D01* +X204339131Y-92946246D01* +X204404598Y-92935878D01* +X204515873Y-92879180D01* +X204604180Y-92790873D01* +X204660878Y-92679598D01* +X204675500Y-92587276D01* +X204675500Y-91612724D01* +X204674167Y-91604309D01* +X204667733Y-91563685D01* +X204660878Y-91520402D01* +X204653713Y-91506341D01* +X204604181Y-91409129D01* +X204604180Y-91409127D01* +X204515873Y-91320820D01* +X204515870Y-91320818D01* +X204515871Y-91320818D01* +X204404601Y-91264123D01* +X204404598Y-91264122D01* +X204371510Y-91258881D01* +X204316995Y-91231102D01* +X204289218Y-91176584D01* +X204288000Y-91161100D01* +X204288000Y-90512671D01* +X204249864Y-90420603D01* +X204179496Y-90350234D01* +X204151719Y-90295717D01* +X204150500Y-90280231D01* +X204150500Y-90027609D01* +X204169407Y-89969418D01* +X204179490Y-89957611D01* +X204260489Y-89876613D01* +X204300835Y-89806732D01* +X204319797Y-89773890D01* +X204319797Y-89773888D01* +X204319799Y-89773886D01* +X204350500Y-89659309D01* +X204350500Y-89540691D01* +X204319799Y-89426114D01* +X204319797Y-89426111D01* +X204319797Y-89426109D01* +X204260492Y-89323391D01* +X204260490Y-89323389D01* +X204260489Y-89323387D01* +X204176613Y-89239511D01* +X204176610Y-89239509D01* +X204176608Y-89239507D01* +X204073889Y-89180202D01* +X204073890Y-89180202D01* +X204060351Y-89176574D01* +X203959309Y-89149500D01* +X203840691Y-89149500D01* +X203799669Y-89160492D01* +X203726109Y-89180202D01* +X203623391Y-89239507D01* +X203539507Y-89323391D01* +X203480202Y-89426109D01* +X203464218Y-89485763D01* +X203449500Y-89540691D01* +X203449500Y-89659309D01* +X203462315Y-89707134D01* +X203480202Y-89773890D01* +X203539507Y-89876608D01* +X203539509Y-89876610D01* +X203539511Y-89876613D01* +X203620505Y-89957607D01* +X203648281Y-90012122D01* +X203649500Y-90027609D01* +X203649500Y-90474828D01* +X203687634Y-90566894D01* +X203687635Y-90566895D01* +X203687636Y-90566897D01* +X203758005Y-90637266D01* +X203785781Y-90691781D01* +X203787000Y-90707268D01* +X203787000Y-91161100D01* +X203768093Y-91219291D01* +X203718593Y-91255255D01* +X203703490Y-91258881D01* +X203670401Y-91264122D01* +X203670398Y-91264123D01* +X203559129Y-91320818D01* +X203470818Y-91409129D01* +X203414123Y-91520398D01* +X203414122Y-91520402D01* +X203399500Y-91612721D01* +X203150000Y-91612721D01* +X203150000Y-91594183D01* +X203139593Y-91492329D01* +X203084904Y-91327287D01* +X202993631Y-91179311D01* +X202870688Y-91056368D01* +X202722712Y-90965095D01* +X202557670Y-90910406D01* +X202455816Y-90900000D01* +X202412501Y-90900000D01* +X202412500Y-90900001D01* +X201912500Y-90900001D01* +X201912499Y-90900000D01* +X201869184Y-90900000D01* +X201767329Y-90910406D01* +X201602287Y-90965095D01* +X201454311Y-91056368D01* +X201331368Y-91179311D01* +X201240095Y-91327287D01* +X201185406Y-91492329D01* +X201175000Y-91594183D01* +X196905556Y-91594183D01* +X196911885Y-91586154D01* +X196916143Y-91573050D01* +X196941232Y-91548927D01* +X197067875Y-91464308D01* +X197182858Y-91349325D01* +X197273198Y-91214121D01* +X197335426Y-91063889D01* +X197367150Y-90904405D01* +X197367150Y-90741795D01* +X197335426Y-90582311D01* +X197273198Y-90432079D01* +X197182858Y-90296875D01* +X197067875Y-90181892D01* +X197039900Y-90163200D01* +X196932668Y-90091550D01* +X196782440Y-90029324D01* +X196622955Y-89997600D01* +X196460345Y-89997600D01* +X196460344Y-89997600D01* +X196300859Y-90029324D01* +X196150631Y-90091550D01* +X196015428Y-90181889D01* +X195900439Y-90296878D01* +X195810102Y-90432079D01* +X195747874Y-90582309D01* +X195716150Y-90741794D01* +X195716150Y-90904405D01* +X195747874Y-91063890D01* +X195810100Y-91214118D01* +X195885716Y-91327287D01* +X195900442Y-91349325D01* +X196015425Y-91464308D01* +X196140064Y-91547589D01* +X196142064Y-91548925D01* +X196179944Y-91596975D01* +X196182346Y-91658113D01* +X196148354Y-91708987D01* +X196117657Y-91725395D01* +X196090610Y-91734183D01* +X195925818Y-91818148D01* +X195905218Y-91833114D01* +X196495204Y-92423100D01* +X196488989Y-92423100D01* +X196387256Y-92450359D01* +X196296044Y-92503020D01* +X196221570Y-92577494D01* +X196168909Y-92668706D01* +X196141650Y-92770439D01* +X196141650Y-92776654D01* +X195551664Y-92186668D01* +X195536698Y-92207268D01* +X195452734Y-92372058D01* +X195395582Y-92547956D01* +X195366650Y-92730622D01* +X175366650Y-92730622D01* +X175337717Y-92547956D01* +X175280565Y-92372058D01* +X175196603Y-92207272D01* +X175196598Y-92207264D01* +X175181634Y-92186668D01* +X174591650Y-92776652D01* +X174591650Y-92770439D01* +X174564391Y-92668706D01* +X174511730Y-92577494D01* +X174437256Y-92503020D01* +X174346044Y-92450359D01* +X174244311Y-92423100D01* +X174238094Y-92423100D01* +X174828080Y-91833114D01* +X174807485Y-91818151D01* +X174807477Y-91818146D01* +X174642693Y-91734185D01* +X174615643Y-91725396D01* +X174566143Y-91689432D01* +X174547236Y-91631241D01* +X174566143Y-91573050D01* +X174591232Y-91548927D01* +X174717875Y-91464308D01* +X174832858Y-91349325D01* +X174923198Y-91214121D01* +X174985426Y-91063889D01* +X175017150Y-90904405D01* +X175017150Y-90741795D01* +X174985426Y-90582311D01* +X174923198Y-90432079D01* +X174832858Y-90296875D01* +X174717875Y-90181892D01* +X174689900Y-90163200D01* +X174582668Y-90091550D01* +X174432440Y-90029324D01* +X174272955Y-89997600D01* +X174110345Y-89997600D01* +X174110344Y-89997600D01* +X173950859Y-90029324D01* +X173800631Y-90091550D01* +X173665428Y-90181889D01* +X173550439Y-90296878D01* +X173460102Y-90432079D01* +X173397874Y-90582309D01* +X173366150Y-90741794D01* +X173366150Y-90904405D01* +X173397874Y-91063890D01* +X173460100Y-91214118D01* +X173535716Y-91327287D01* +X173550442Y-91349325D01* +X173665425Y-91464308D01* +X173790064Y-91547589D01* +X173792064Y-91548925D01* +X173829944Y-91596975D01* +X173832346Y-91658113D01* +X173798354Y-91708987D01* +X173767657Y-91725395D01* +X173740610Y-91734183D01* +X173575818Y-91818148D01* +X173555218Y-91833114D01* +X174145204Y-92423100D01* +X174138989Y-92423100D01* +X174037256Y-92450359D01* +X173946044Y-92503020D01* +X173871570Y-92577494D01* +X173818909Y-92668706D01* +X173791650Y-92770439D01* +X173791650Y-92776654D01* +X173201664Y-92186668D01* +X173186698Y-92207268D01* +X173102734Y-92372058D01* +X173045582Y-92547956D01* +X173016650Y-92730622D01* +X164692150Y-92730622D01* +X164692150Y-91990422D01* +X164694052Y-91971108D01* +X164696018Y-91961225D01* +X164700500Y-91938691D01* +X164700500Y-91761308D01* +X164665895Y-91587334D01* +X164598013Y-91423453D01* +X164598011Y-91423451D01* +X164598009Y-91423445D01* +X164541479Y-91338844D01* +X164499464Y-91275964D01* +X164374036Y-91150536D01* +X164329995Y-91121109D01* +X164226554Y-91051990D01* +X164226545Y-91051986D01* +X164062664Y-90984104D01* +X163888694Y-90949500D01* +X163888692Y-90949500D01* +X163711309Y-90949500D01* +X163711306Y-90949500D01* +X163537335Y-90984104D01* +X163373454Y-91051986D01* +X163225963Y-91150537D01* +X163092190Y-91284308D01* +X163092185Y-91284314D01* +X163065936Y-91323600D01* +X163062745Y-91328376D01* +X162993637Y-91431803D01* +X162975002Y-91476793D01* +X162972405Y-91483061D01* +X162972404Y-91483064D01* +X162925756Y-91595680D01* +X162925754Y-91595686D01* +X162904661Y-91701734D01* +X162895131Y-91749647D01* +X162892811Y-91761309D01* +X162891150Y-91769657D01* +X162891150Y-102973600D01* +X162872243Y-103031791D01* +X162822743Y-103067755D01* +X162792150Y-103072600D01* +X162776822Y-103072600D01* +X162732929Y-103081332D01* +X162732925Y-103081334D01* +X162683148Y-103114594D01* +X162683144Y-103114598D01* +X162649884Y-103164375D01* +X162649882Y-103164379D01* +X162641150Y-103208272D01* +X162641150Y-106416800D01* +X162622243Y-106474991D01* +X162572743Y-106510955D01* +X162542150Y-106515800D01* +X155761150Y-106515800D01* +X155702959Y-106496893D01* +X155666995Y-106447393D01* +X155662150Y-106416800D01* +X155662150Y-95904408D01* +X155662149Y-95904405D01* +X155660587Y-95896553D01* +X155627545Y-95730434D01* +X155586698Y-95631822D01* +X155585157Y-95628102D01* +X155559664Y-95566555D01* +X155559664Y-95566554D01* +X155486599Y-95457206D01* +X155486598Y-95457204D01* +X155461118Y-95419069D01* +X155461116Y-95419067D01* +X155461114Y-95419064D01* +X153342541Y-93300491D01* +X154264950Y-93300491D01* +X154264950Y-93419109D01* +X154289837Y-93511988D01* +X154295652Y-93533690D01* +X154354957Y-93636408D01* +X154354959Y-93636410D01* +X154354961Y-93636413D01* +X154438837Y-93720289D01* +X154438839Y-93720290D01* +X154438841Y-93720292D01* +X154541560Y-93779597D01* +X154541561Y-93779597D01* +X154541564Y-93779599D01* +X154656141Y-93810300D01* +X154656143Y-93810300D01* +X154774757Y-93810300D01* +X154774759Y-93810300D01* +X154889336Y-93779599D01* +X154889338Y-93779597D01* +X154889340Y-93779597D01* +X154992058Y-93720292D01* +X154992058Y-93720291D01* +X154992063Y-93720289D01* +X155075939Y-93636413D01* +X155079403Y-93630413D01* +X155135247Y-93533690D01* +X155135247Y-93533688D01* +X155135249Y-93533686D01* +X155165950Y-93419109D01* +X155165950Y-93300491D01* +X155135249Y-93185914D01* +X155135247Y-93185911D01* +X155135247Y-93185909D01* +X155075942Y-93083191D01* +X155075940Y-93083189D01* +X155075939Y-93083187D01* +X154992063Y-92999311D01* +X154992060Y-92999309D01* +X154992058Y-92999307D01* +X154889339Y-92940002D01* +X154889340Y-92940002D01* +X154873941Y-92935876D01* +X154774759Y-92909300D01* +X154656141Y-92909300D01* +X154586017Y-92928089D01* +X154541559Y-92940002D01* +X154438841Y-92999307D01* +X154354957Y-93083191D01* +X154295652Y-93185909D01* +X154285687Y-93223100D01* +X154264950Y-93300491D01* +X153342541Y-93300491D01* +X143825686Y-83783636D01* +X143819951Y-83779804D01* +X143753315Y-83735279D01* +X143753309Y-83735276D01* +X143749071Y-83732444D01* +X143678197Y-83685087D01* +X143590109Y-83648600D01* +X143585847Y-83646834D01* +X143585844Y-83646833D01* +X143514319Y-83617206D01* +X143514313Y-83617204D01* +X143340344Y-83582600D01* +X143340342Y-83582600D01* +X143340341Y-83582600D01* +X134760342Y-83582600D01* +X134582958Y-83582600D01* +X134582955Y-83582600D01* +X134408986Y-83617204D01* +X134408980Y-83617206D01* +X134308662Y-83658760D01* +X134308658Y-83658761D01* +X134304858Y-83660336D01* +X134245103Y-83685087D01* +X134207681Y-83710092D01* +X134203022Y-83713204D01* +X134203020Y-83713206D01* +X134097617Y-83783633D01* +X129548046Y-88333204D01* +X129493529Y-88360981D01* +X129478042Y-88362200D01* +X128033866Y-88362200D01* +X127975675Y-88343293D01* +X127939711Y-88293793D01* +X127939711Y-88232607D01* +X127975675Y-88183107D01* +X127995981Y-88171736D01* +X128102403Y-88127655D01* +X128118197Y-88121113D01* +X128265685Y-88022564D01* +X128391114Y-87897135D01* +X128489663Y-87749647D01* +X128557544Y-87585766D01* +X128592150Y-87411791D01* +X128592150Y-87234409D01* +X128557544Y-87060434D01* +X128496918Y-86914069D01* +X128489664Y-86896555D01* +X128489664Y-86896554D01* +X128391114Y-86749065D01* +X128265684Y-86623635D01* +X128118194Y-86525085D01* +X127954316Y-86457206D01* +X127780343Y-86422600D01* +X127780341Y-86422600D01* +X127602959Y-86422600D01* +X127602956Y-86422600D01* +X127428984Y-86457206D01* +X127428982Y-86457206D01* +X127265105Y-86525085D01* +X127265104Y-86525085D01* +X127117615Y-86623635D01* +X126992185Y-86749065D01* +X126893635Y-86896554D01* +X126893635Y-86896555D01* +X126825756Y-87060432D01* +X126825756Y-87060434D01* +X126791150Y-87234406D01* +X126791150Y-87344930D01* +X126772243Y-87403121D01* +X126762154Y-87414934D01* +X122907723Y-91269364D01* +X122853206Y-91297141D01* +X122828027Y-91297884D01* +X122825140Y-91297600D01* +X122825130Y-91297600D01* +X122658170Y-91297600D01* +X122658162Y-91297600D01* +X122635562Y-91302096D01* +X122574801Y-91294904D01* +X122529872Y-91253370D01* +X122517250Y-91204998D01* +X122517250Y-89284215D01* +X122536157Y-89226024D01* +X122561250Y-89201899D01* +X122584384Y-89186442D01* +X122656319Y-89138377D01* +X127572500Y-84222196D01* +X127627017Y-84194419D01* +X127642504Y-84193200D01* +X131383418Y-84193200D01* +X131383419Y-84193200D01* +X131509094Y-84168201D01* +X131627477Y-84119165D01* +X131734019Y-84047976D01* +X131824626Y-83957369D01* +X131895815Y-83850827D01* +X131944851Y-83732444D01* +X131969850Y-83606769D01* +X131969850Y-83478631D01* +X131944851Y-83352956D01* +X131895815Y-83234573D01* +X131895813Y-83234570D01* +X131895811Y-83234566D01* +X131848385Y-83163589D01* +X131824626Y-83128031D01* +X131734019Y-83037424D01* +X131658987Y-82987289D01* +X131627483Y-82966238D01* +X131627475Y-82966234D01* +X131509097Y-82917200D01* +X131509095Y-82917199D01* +X131509094Y-82917199D01* +X131383419Y-82892200D01* +X127267981Y-82892200D01* +X127267980Y-82892200D01* +X127206634Y-82904403D01* +X127142306Y-82917199D01* +X127142305Y-82917199D01* +X127142302Y-82917200D01* +X127083291Y-82941644D01* +X127023923Y-82966234D01* +X126917384Y-83037420D01* +X121736370Y-88218434D01* +X121665183Y-88324975D01* +X121616149Y-88443354D01* +X121616149Y-88443356D01* +X121591151Y-88569028D01* +X121591151Y-88697171D01* +X121606312Y-88773391D01* +X121608651Y-88785151D01* +X121616149Y-88822843D01* +X121616149Y-88822845D01* +X121665183Y-88941224D01* +X121724169Y-89029505D01* +X121736373Y-89047769D01* +X121826981Y-89138377D01* +X121826984Y-89138379D01* +X121826986Y-89138381D01* +X121922050Y-89201899D01* +X121959930Y-89249948D01* +X121966050Y-89284215D01* +X121966050Y-91204998D01* +X121947143Y-91263189D01* +X121897643Y-91299153D01* +X121847738Y-91302096D01* +X121825137Y-91297600D01* +X121825130Y-91297600D01* +X121658170Y-91297600D01* +X121658162Y-91297600D01* +X121610462Y-91307088D01* +X121549701Y-91299895D01* +X121504772Y-91258362D01* +X121492150Y-91209990D01* +X121492150Y-90553271D01* +X121454014Y-90461203D01* +X121383547Y-90390735D01* +X121383547Y-90390736D01* +X121339150Y-90346339D01* +X121317690Y-90314220D01* +X121304014Y-90281203D01* +X121233547Y-90210736D01* +X120958893Y-89936082D01* +X120683547Y-89660736D01* +X120683545Y-89660735D01* +X120683544Y-89660734D01* +X120591479Y-89622600D01* +X120591478Y-89622600D01* +X120027133Y-89622600D01* +X119968942Y-89603693D01* +X119932978Y-89554193D01* +X119931613Y-89502049D01* +X119931303Y-89502009D01* +X119931561Y-89500047D01* +X119931507Y-89497975D01* +X119932150Y-89495575D01* +X119932150Y-89350625D01* +X119930160Y-89343198D01* +X119894634Y-89210615D01* +X119894632Y-89210612D01* +X119894632Y-89210610D01* +X119822162Y-89085089D01* +X119822160Y-89085087D01* +X119822159Y-89085085D01* +X119719665Y-88982591D01* +X119719662Y-88982589D01* +X119719660Y-88982587D01* +X119594138Y-88910117D01* +X119594139Y-88910117D01* +X119530627Y-88893099D01* +X119454125Y-88872600D01* +X119309175Y-88872600D01* +X119249105Y-88888696D01* +X119169160Y-88910117D01* +X119043639Y-88982587D01* +X118941137Y-89085089D01* +X118868667Y-89210610D01* +X118838448Y-89323387D01* +X118831150Y-89350625D01* +X118831150Y-89495575D01* +X118836189Y-89514379D01* +X118868667Y-89635589D01* +X118941137Y-89761110D01* +X118941139Y-89761112D01* +X118941141Y-89761115D01* +X119043635Y-89863609D01* +X119043637Y-89863610D01* +X119043639Y-89863612D01* +X119169161Y-89936082D01* +X119169162Y-89936082D01* +X119169165Y-89936084D01* +X119249483Y-89957605D01* +X119254473Y-89958942D01* +X119298853Y-89984565D01* +X119399753Y-90085464D01* +X119465366Y-90112642D01* +X119475843Y-90121590D01* +X119488770Y-90126359D01* +X119498531Y-90140967D01* +X119511892Y-90152378D01* +X119515108Y-90165775D01* +X119522764Y-90177232D01* +X119522074Y-90194788D01* +X119526176Y-90211873D01* +X119520902Y-90224603D01* +X119520362Y-90238371D01* +X119509486Y-90252167D01* +X119502762Y-90268401D01* +X119482483Y-90286421D01* +X119426384Y-90323906D01* +X119392814Y-90346336D01* +X119122447Y-90616704D01* +X119067930Y-90644481D01* +X119052443Y-90645700D01* +X115447658Y-90645700D01* +X115389467Y-90626793D01* +X115377654Y-90616704D01* +X114948742Y-90187792D01* +X114920965Y-90133275D01* +X114930536Y-90072843D01* +X114973801Y-90029578D01* +X115034233Y-90020007D01* +X115038061Y-90020691D01* +X115102948Y-90033598D01* +X115102953Y-90033598D01* +X115102959Y-90033600D01* +X115102960Y-90033600D01* +X115280340Y-90033600D01* +X115280341Y-90033600D01* +X115454316Y-89998994D01* +X115618197Y-89931113D01* +X115765685Y-89832564D01* +X115891114Y-89707135D01* +X115932340Y-89645435D01* +X115944260Y-89627597D01* +X115992310Y-89589718D01* +X116026575Y-89583599D01* +X116061511Y-89583599D01* +X116061514Y-89583599D01* +X116086641Y-89580685D01* +X116189415Y-89535306D01* +X116268856Y-89455865D01* +X116314235Y-89353091D01* +X116317150Y-89327965D01* +X116317149Y-88938236D01* +X116314235Y-88913109D01* +X116268856Y-88810335D01* +X116189415Y-88730894D01* +X116151161Y-88714003D01* +X116105566Y-88673202D01* +X116092150Y-88623439D01* +X116092150Y-88372760D01* +X116111057Y-88314569D01* +X116151161Y-88282196D01* +X116189415Y-88265306D01* +X116268856Y-88185865D01* +X116314235Y-88083091D01* +X116317150Y-88057965D01* +X116317149Y-87668236D01* +X116314235Y-87643109D01* +X116268856Y-87540335D01* +X116189415Y-87460894D01* +X116186844Y-87459759D01* +X116151161Y-87444003D01* +X116105566Y-87403202D01* +X116092150Y-87353439D01* +X116092150Y-87102760D01* +X116111057Y-87044569D01* +X116151161Y-87012196D01* +X116189415Y-86995306D01* +X116268856Y-86915865D01* +X116314235Y-86813091D01* +X116317150Y-86787965D01* +X116317149Y-86398236D01* +X116314235Y-86373109D01* +X116268856Y-86270335D01* +X116189415Y-86190894D01* +X116151161Y-86174003D01* +X116105566Y-86133202D01* +X116092150Y-86083439D01* +X116092150Y-85832760D01* +X116111057Y-85774569D01* +X116151161Y-85742196D01* +X116189415Y-85725306D01* +X116268856Y-85645865D01* +X116314235Y-85543091D01* +X116317150Y-85517965D01* +X116317149Y-85128236D01* +X116314235Y-85103109D01* +X116268856Y-85000335D01* +X116189415Y-84920894D01* +X116086641Y-84875515D01* +X116086640Y-84875514D01* +X116086638Y-84875514D01* +X116061519Y-84872600D01* +X116061515Y-84872600D01* +X116026574Y-84872600D01* +X116009863Y-84867170D01* +X115992309Y-84866481D01* +X115981488Y-84857951D01* +X115968383Y-84853693D01* +X115944259Y-84828602D01* +X115910916Y-84778700D01* +X115891114Y-84749064D01* +X114063986Y-82921936D01* +X114063974Y-82921928D01* +X113978423Y-82864765D01* +X113974897Y-82862409D01* +X113916497Y-82823387D01* +X113863132Y-82801282D01* +X113858322Y-82798634D01* +X113840961Y-82780122D01* +X113821662Y-82763638D01* +X113820340Y-82758133D01* +X113816468Y-82754004D01* +X113813304Y-82728823D01* +X113807379Y-82704143D01* +X113809545Y-82698912D01* +X113808840Y-82693296D01* +X113821082Y-82671062D01* +X113830795Y-82647616D01* +X113835621Y-82644658D01* +X113838352Y-82639699D01* +X113861324Y-82628907D01* +X113882964Y-82615647D01* +X113890588Y-82614131D01* +X114036061Y-82591091D01* +X114230677Y-82527856D01* +X114412996Y-82434961D01* +X114578541Y-82314685D01* +X114723235Y-82169991D01* +X114843511Y-82004446D01* +X114936406Y-81822127D01* +X114999640Y-81627514D01* +X115008259Y-81573100D01* +X114164662Y-81573100D01* +X114197575Y-81516093D01* +X114231650Y-81388926D01* +X114231650Y-81257274D01* +X114224203Y-81229481D01* +X115321150Y-81229481D01* +X115321150Y-81416718D01* +X115357676Y-81600349D01* +X115429327Y-81773329D01* +X115429331Y-81773338D01* +X115485965Y-81858095D01* +X115533348Y-81929008D01* +X115665742Y-82061402D01* +X115732113Y-82105749D01* +X115821411Y-82165418D01* +X115821417Y-82165420D01* +X115821419Y-82165422D01* +X115994399Y-82237073D01* +X116178034Y-82273600D01* +X116178035Y-82273600D01* +X116365265Y-82273600D01* +X116365266Y-82273600D01* +X116548901Y-82237073D01* +X116721881Y-82165422D01* +X116721884Y-82165419D01* +X116721888Y-82165418D01* +X116767397Y-82135009D01* +X116877558Y-82061402D01* +X117009952Y-81929008D01* +X117103486Y-81789025D01* +X117113968Y-81773338D01* +X117113969Y-81773334D01* +X117113972Y-81773331D01* +X117185623Y-81600351D01* +X117222150Y-81416716D01* +X117222150Y-81229484D01* +X117222149Y-81229481D01* +X117861150Y-81229481D01* +X117861150Y-81416718D01* +X117897676Y-81600349D01* +X117969327Y-81773329D01* +X117969331Y-81773338D01* +X118025965Y-81858095D01* +X118073348Y-81929008D01* +X118205742Y-82061402D01* +X118272113Y-82105749D01* +X118361411Y-82165418D01* +X118361417Y-82165420D01* +X118361419Y-82165422D01* +X118534399Y-82237073D01* +X118718034Y-82273600D01* +X118718035Y-82273600D01* +X118905265Y-82273600D01* +X118905266Y-82273600D01* +X119088901Y-82237073D01* +X119261881Y-82165422D01* +X119261884Y-82165419D01* +X119261888Y-82165418D01* +X119307397Y-82135009D01* +X119417558Y-82061402D01* +X119549952Y-81929008D01* +X119643486Y-81789025D01* +X119653968Y-81773338D01* +X119653969Y-81773334D01* +X119653972Y-81773331D01* +X119725623Y-81600351D01* +X119762150Y-81416716D01* +X119762150Y-81229484D01* +X119762149Y-81229481D01* +X120401150Y-81229481D01* +X120401150Y-81416718D01* +X120437676Y-81600349D01* +X120509327Y-81773329D01* +X120509331Y-81773338D01* +X120565965Y-81858095D01* +X120613348Y-81929008D01* +X120745742Y-82061402D01* +X120812113Y-82105749D01* +X120901411Y-82165418D01* +X120901417Y-82165420D01* +X120901419Y-82165422D01* +X121074399Y-82237073D01* +X121258034Y-82273600D01* +X121258035Y-82273600D01* +X121445265Y-82273600D01* +X121445266Y-82273600D01* +X121628901Y-82237073D01* +X121801881Y-82165422D01* +X121801884Y-82165419D01* +X121801888Y-82165418D01* +X121847397Y-82135009D01* +X121957558Y-82061402D01* +X122089952Y-81929008D01* +X122183486Y-81789025D01* +X122193968Y-81773338D01* +X122193969Y-81773334D01* +X122193972Y-81773331D01* +X122265623Y-81600351D01* +X122302150Y-81416716D01* +X122302150Y-81229484D01* +X122302149Y-81229481D01* +X122941150Y-81229481D01* +X122941150Y-81416718D01* +X122977676Y-81600349D01* +X123049327Y-81773329D01* +X123049331Y-81773338D01* +X123105965Y-81858095D01* +X123153348Y-81929008D01* +X123285742Y-82061402D01* +X123352113Y-82105749D01* +X123441411Y-82165418D01* +X123441417Y-82165420D01* +X123441419Y-82165422D01* +X123614399Y-82237073D01* +X123798034Y-82273600D01* +X123798035Y-82273600D01* +X123985265Y-82273600D01* +X123985266Y-82273600D01* +X124168901Y-82237073D01* +X124341881Y-82165422D01* +X124341884Y-82165419D01* +X124341888Y-82165418D01* +X124387397Y-82135009D01* +X124497558Y-82061402D01* +X124629952Y-81929008D01* +X124723486Y-81789025D01* +X124733968Y-81773338D01* +X124733969Y-81773334D01* +X124733972Y-81773331D01* +X124805623Y-81600351D01* +X124842150Y-81416716D01* +X124842150Y-81229484D01* +X124842149Y-81229481D01* +X125481150Y-81229481D01* +X125481150Y-81416718D01* +X125517676Y-81600349D01* +X125589327Y-81773329D01* +X125589331Y-81773338D01* +X125645965Y-81858095D01* +X125693348Y-81929008D01* +X125825742Y-82061402D01* +X125892113Y-82105749D01* +X125981411Y-82165418D01* +X125981417Y-82165420D01* +X125981419Y-82165422D01* +X126154399Y-82237073D01* +X126338034Y-82273600D01* +X126338035Y-82273600D01* +X126525265Y-82273600D01* +X126525266Y-82273600D01* +X126708901Y-82237073D01* +X126881881Y-82165422D01* +X126881884Y-82165419D01* +X126881888Y-82165418D01* +X126927397Y-82135009D01* +X127037558Y-82061402D01* +X127169952Y-81929008D01* +X127263486Y-81789025D01* +X127273968Y-81773338D01* +X127273969Y-81773334D01* +X127273972Y-81773331D01* +X127345623Y-81600351D01* +X127382150Y-81416716D01* +X127382150Y-81229484D01* +X127382149Y-81229481D01* +X128021150Y-81229481D01* +X128021150Y-81416718D01* +X128057676Y-81600349D01* +X128129327Y-81773329D01* +X128129331Y-81773338D01* +X128185965Y-81858095D01* +X128233348Y-81929008D01* +X128365742Y-82061402D01* +X128432113Y-82105749D01* +X128521411Y-82165418D01* +X128521417Y-82165420D01* +X128521419Y-82165422D01* +X128694399Y-82237073D01* +X128878034Y-82273600D01* +X128878035Y-82273600D01* +X129065265Y-82273600D01* +X129065266Y-82273600D01* +X129248901Y-82237073D01* +X129421881Y-82165422D01* +X129421884Y-82165419D01* +X129421888Y-82165418D01* +X129467397Y-82135009D01* +X129577558Y-82061402D01* +X129709952Y-81929008D01* +X129803486Y-81789025D01* +X129813968Y-81773338D01* +X129813969Y-81773334D01* +X129813972Y-81773331D01* +X129885623Y-81600351D01* +X129922150Y-81416716D01* +X129922150Y-81229484D01* +X129922149Y-81229481D01* +X132081150Y-81229481D01* +X132081150Y-81416718D01* +X132117676Y-81600349D01* +X132189327Y-81773329D01* +X132189331Y-81773338D01* +X132245965Y-81858095D01* +X132293348Y-81929008D01* +X132425742Y-82061402D01* +X132492113Y-82105749D01* +X132581411Y-82165418D01* +X132581417Y-82165420D01* +X132581419Y-82165422D01* +X132754399Y-82237073D01* +X132938034Y-82273600D01* +X132938035Y-82273600D01* +X133125265Y-82273600D01* +X133125266Y-82273600D01* +X133308901Y-82237073D01* +X133481881Y-82165422D01* +X133481884Y-82165419D01* +X133481888Y-82165418D01* +X133527397Y-82135009D01* +X133637558Y-82061402D01* +X133769952Y-81929008D01* +X133863486Y-81789025D01* +X133873968Y-81773338D01* +X133873969Y-81773334D01* +X133873972Y-81773331D01* +X133945623Y-81600351D01* +X133982150Y-81416716D01* +X133982150Y-81229484D01* +X133982149Y-81229481D01* +X134621150Y-81229481D01* +X134621150Y-81416718D01* +X134657676Y-81600349D01* +X134729327Y-81773329D01* +X134729331Y-81773338D01* +X134785965Y-81858095D01* +X134833348Y-81929008D01* +X134965742Y-82061402D01* +X135032113Y-82105749D01* +X135121411Y-82165418D01* +X135121417Y-82165420D01* +X135121419Y-82165422D01* +X135294399Y-82237073D01* +X135478034Y-82273600D01* +X135478035Y-82273600D01* +X135665265Y-82273600D01* +X135665266Y-82273600D01* +X135848901Y-82237073D01* +X136021881Y-82165422D01* +X136021884Y-82165419D01* +X136021888Y-82165418D01* +X136067397Y-82135009D01* +X136177558Y-82061402D01* +X136309952Y-81929008D01* +X136403486Y-81789025D01* +X136413968Y-81773338D01* +X136413969Y-81773334D01* +X136413972Y-81773331D01* +X136485623Y-81600351D01* +X136522150Y-81416716D01* +X136522150Y-81229484D01* +X136522149Y-81229481D01* +X137161150Y-81229481D01* +X137161150Y-81416718D01* +X137197676Y-81600349D01* +X137269327Y-81773329D01* +X137269331Y-81773338D01* +X137325965Y-81858095D01* +X137373348Y-81929008D01* +X137505742Y-82061402D01* +X137572113Y-82105749D01* +X137661411Y-82165418D01* +X137661417Y-82165420D01* +X137661419Y-82165422D01* +X137834399Y-82237073D01* +X138018034Y-82273600D01* +X138018035Y-82273600D01* +X138205265Y-82273600D01* +X138205266Y-82273600D01* +X138388901Y-82237073D01* +X138561881Y-82165422D01* +X138561884Y-82165419D01* +X138561888Y-82165418D01* +X138607397Y-82135009D01* +X138717558Y-82061402D01* +X138849952Y-81929008D01* +X138943486Y-81789025D01* +X138953968Y-81773338D01* +X138953969Y-81773334D01* +X138953972Y-81773331D01* +X139025623Y-81600351D01* +X139062150Y-81416716D01* +X139062150Y-81229484D01* +X139062149Y-81229481D01* +X139701150Y-81229481D01* +X139701150Y-81416718D01* +X139737676Y-81600349D01* +X139809327Y-81773329D01* +X139809331Y-81773338D01* +X139865965Y-81858095D01* +X139913348Y-81929008D01* +X140045742Y-82061402D01* +X140112113Y-82105749D01* +X140201411Y-82165418D01* +X140201417Y-82165420D01* +X140201419Y-82165422D01* +X140374399Y-82237073D01* +X140558034Y-82273600D01* +X140558035Y-82273600D01* +X140745265Y-82273600D01* +X140745266Y-82273600D01* +X140928901Y-82237073D01* +X141101881Y-82165422D01* +X141101884Y-82165419D01* +X141101888Y-82165418D01* +X141147397Y-82135009D01* +X141257558Y-82061402D01* +X141389952Y-81929008D01* +X141483486Y-81789025D01* +X141493968Y-81773338D01* +X141493969Y-81773334D01* +X141493972Y-81773331D01* +X141565623Y-81600351D01* +X141602150Y-81416716D01* +X141602150Y-81229484D01* +X141602149Y-81229481D01* +X142241150Y-81229481D01* +X142241150Y-81416718D01* +X142277676Y-81600349D01* +X142349327Y-81773329D01* +X142349331Y-81773338D01* +X142405965Y-81858095D01* +X142453348Y-81929008D01* +X142585742Y-82061402D01* +X142652113Y-82105749D01* +X142741411Y-82165418D01* +X142741417Y-82165420D01* +X142741419Y-82165422D01* +X142914399Y-82237073D01* +X143098034Y-82273600D01* +X143098035Y-82273600D01* +X143285265Y-82273600D01* +X143285266Y-82273600D01* +X143468901Y-82237073D01* +X143641881Y-82165422D01* +X143641884Y-82165419D01* +X143641888Y-82165418D01* +X143687397Y-82135009D01* +X143797558Y-82061402D01* +X143929952Y-81929008D01* +X144023486Y-81789025D01* +X144033968Y-81773338D01* +X144033969Y-81773334D01* +X144033972Y-81773331D01* +X144105623Y-81600351D01* +X144142150Y-81416716D01* +X144142150Y-81229484D01* +X144142149Y-81229481D01* +X144781150Y-81229481D01* +X144781150Y-81416718D01* +X144817676Y-81600349D01* +X144889327Y-81773329D01* +X144889331Y-81773338D01* +X144945965Y-81858095D01* +X144993348Y-81929008D01* +X145125742Y-82061402D01* +X145192113Y-82105749D01* +X145281411Y-82165418D01* +X145281417Y-82165420D01* +X145281419Y-82165422D01* +X145454399Y-82237073D01* +X145638034Y-82273600D01* +X145638035Y-82273600D01* +X145825265Y-82273600D01* +X145825266Y-82273600D01* +X146008901Y-82237073D01* +X146181881Y-82165422D01* +X146181884Y-82165419D01* +X146181888Y-82165418D01* +X146227397Y-82135009D01* +X146337558Y-82061402D01* +X146469952Y-81929008D01* +X146563486Y-81789025D01* +X146573968Y-81773338D01* +X146573969Y-81773334D01* +X146573972Y-81773331D01* +X146645623Y-81600351D01* +X146682150Y-81416716D01* +X146682150Y-81229484D01* +X146682149Y-81229481D01* +X147321150Y-81229481D01* +X147321150Y-81416718D01* +X147357676Y-81600349D01* +X147429327Y-81773329D01* +X147429331Y-81773338D01* +X147485965Y-81858095D01* +X147533348Y-81929008D01* +X147665742Y-82061402D01* +X147732113Y-82105749D01* +X147821411Y-82165418D01* +X147821417Y-82165420D01* +X147821419Y-82165422D01* +X147994399Y-82237073D01* +X148178034Y-82273600D01* +X148178035Y-82273600D01* +X148365265Y-82273600D01* +X148365266Y-82273600D01* +X148548901Y-82237073D01* +X148721881Y-82165422D01* +X148721884Y-82165419D01* +X148721888Y-82165418D01* +X148767397Y-82135009D01* +X148877558Y-82061402D01* +X149009952Y-81929008D01* +X149113972Y-81773331D01* +X149121018Y-81756319D01* +X149160753Y-81709792D01* +X149220247Y-81695507D01* +X149276776Y-81718919D01* +X149282487Y-81724198D01* +X152408499Y-84850209D01* +X155523285Y-87964995D01* +X155523286Y-87964997D01* +X155593753Y-88035464D01* +X155593754Y-88035464D01* +X155593755Y-88035465D01* +X155685821Y-88073600D01* +X155685822Y-88073600D01* +X173534710Y-88073600D01* +X173592901Y-88092507D01* +X173628865Y-88142007D01* +X173628865Y-88203193D01* +X173604715Y-88242601D01* +X173576350Y-88270967D01* +X173550439Y-88296878D01* +X173460100Y-88432081D01* +X173397874Y-88582309D01* +X173366150Y-88741794D01* +X173366150Y-88904405D01* +X173397874Y-89063890D01* +X173460100Y-89214118D01* +X173549957Y-89348600D01* +X173550442Y-89349325D01* +X173665425Y-89464308D01* +X173800629Y-89554648D01* +X173800630Y-89554648D01* +X173800631Y-89554649D01* +X173840596Y-89571203D01* +X173950861Y-89616876D01* +X174110345Y-89648600D01* +X174110346Y-89648600D01* +X174272954Y-89648600D01* +X174272955Y-89648600D01* +X174432439Y-89616876D01* +X174582671Y-89554648D01* +X174717875Y-89464308D01* +X174832858Y-89349325D01* +X174923198Y-89214121D01* +X174985426Y-89063889D01* +X174999986Y-88990691D01* +X190449500Y-88990691D01* +X190449500Y-89109309D01* +X190462687Y-89158523D01* +X190480202Y-89223890D01* +X190539507Y-89326608D01* +X190539509Y-89326610D01* +X190539511Y-89326613D01* +X190623387Y-89410489D01* +X190623389Y-89410490D01* +X190623391Y-89410492D01* +X190726110Y-89469797D01* +X190726111Y-89469797D01* +X190726114Y-89469799D01* +X190840691Y-89500500D01* +X190840693Y-89500500D01* +X190959307Y-89500500D01* +X190959309Y-89500500D01* +X191073886Y-89469799D01* +X191073888Y-89469797D01* +X191073890Y-89469797D01* +X191176608Y-89410492D01* +X191176608Y-89410491D01* +X191176613Y-89410489D01* +X191260489Y-89326613D01* +X191289624Y-89276150D01* +X191319797Y-89223890D01* +X191319797Y-89223888D01* +X191319799Y-89223886D01* +X191350500Y-89109309D01* +X191350500Y-88990691D01* +X191319799Y-88876114D01* +X191319797Y-88876111D01* +X191319797Y-88876109D01* +X191260492Y-88773391D01* +X191260490Y-88773389D01* +X191260489Y-88773387D01* +X191176613Y-88689511D01* +X191176610Y-88689509D01* +X191176608Y-88689507D01* +X191073889Y-88630202D01* +X191073890Y-88630202D01* +X191048650Y-88623439D01* +X190959309Y-88599500D01* +X190840691Y-88599500D01* +X190770567Y-88618289D01* +X190726109Y-88630202D01* +X190623391Y-88689507D01* +X190539507Y-88773391D01* +X190480202Y-88876109D01* +X190465175Y-88932191D01* +X190449500Y-88990691D01* +X174999986Y-88990691D01* +X175017150Y-88904405D01* +X175017150Y-88741795D01* +X174985426Y-88582311D01* +X174927868Y-88443354D01* +X174923199Y-88432081D01* +X174909642Y-88411792D01* +X174832858Y-88296875D01* +X174778584Y-88242601D01* +X174750809Y-88188087D01* +X174760380Y-88127655D01* +X174803645Y-88084390D01* +X174848590Y-88073600D01* +X195884710Y-88073600D01* +X195942901Y-88092507D01* +X195978865Y-88142007D01* +X195978865Y-88203193D01* +X195954715Y-88242601D01* +X195926350Y-88270967D01* +X195900439Y-88296878D01* +X195810100Y-88432081D01* +X195747874Y-88582309D01* +X195716150Y-88741794D01* +X195716150Y-88904405D01* +X195747874Y-89063890D01* +X195810100Y-89214118D01* +X195899957Y-89348600D01* +X195900442Y-89349325D01* +X196015425Y-89464308D01* +X196150629Y-89554648D01* +X196150630Y-89554648D01* +X196150631Y-89554649D01* +X196190596Y-89571203D01* +X196300861Y-89616876D01* +X196460345Y-89648600D01* +X196460346Y-89648600D01* +X196622954Y-89648600D01* +X196622955Y-89648600D01* +X196782439Y-89616876D01* +X196932671Y-89554648D01* +X197067875Y-89464308D01* +X197182858Y-89349325D01* +X197273198Y-89214121D01* +X197304571Y-89138381D01* +X197306090Y-89134714D01* +X197345827Y-89088188D01* +X197397554Y-89073600D01* +X198445491Y-89073600D01* +X198503682Y-89092507D01* +X198515488Y-89102590D01* +X198573387Y-89160489D01* +X198573389Y-89160490D01* +X198573391Y-89160492D01* +X198676110Y-89219797D01* +X198676111Y-89219797D01* +X198676114Y-89219799D01* +X198790691Y-89250500D01* +X198790693Y-89250500D01* +X198909307Y-89250500D01* +X198909309Y-89250500D01* +X199023886Y-89219799D01* +X199023888Y-89219797D01* +X199023890Y-89219797D01* +X199126608Y-89160492D01* +X199126608Y-89160491D01* +X199126613Y-89160489D01* +X199210489Y-89076613D01* +X199214488Y-89069687D01* +X199269797Y-88973890D01* +X199269797Y-88973888D01* +X199269799Y-88973886D01* +X199300500Y-88859309D01* +X199300500Y-88740691D01* +X199269799Y-88626114D01* +X199269797Y-88626111D01* +X199269797Y-88626109D01* +X199210492Y-88523391D01* +X199210490Y-88523389D01* +X199210489Y-88523387D01* +X199126613Y-88439511D01* +X199126610Y-88439509D01* +X199126608Y-88439507D01* +X199023889Y-88380202D01* +X199023890Y-88380202D01* +X198996116Y-88372760D01* +X198909309Y-88349500D01* +X198790691Y-88349500D01* +X198720567Y-88368289D01* +X198676109Y-88380202D01* +X198573391Y-88439507D01* +X198489505Y-88523393D01* +X198485562Y-88528533D01* +X198484527Y-88527739D01* +X198444200Y-88564044D01* +X198403940Y-88572600D01* +X197397554Y-88572600D01* +X197339363Y-88553693D01* +X197306090Y-88511486D01* +X197273198Y-88432079D01* +X197194033Y-88313599D01* +X197182858Y-88296875D01* +X197128584Y-88242601D01* +X197100809Y-88188087D01* +X197110380Y-88127655D01* +X197153645Y-88084390D01* +X197198590Y-88073600D01* +X207546881Y-88073600D01* +X207605072Y-88092507D01* +X207616885Y-88102596D01* +X208898053Y-89383764D01* +X208898054Y-89383764D01* +X208898055Y-89383765D01* +X208990121Y-89421900D01* +X208990122Y-89421900D01* +X209089778Y-89421900D01* +X209313921Y-89421900D01* +X209372112Y-89440807D01* +X209408076Y-89490307D01* +X209408076Y-89551493D01* +X209383925Y-89590904D01* +X209289514Y-89685314D01* +X209289511Y-89685318D01* +X209180017Y-89849186D01* +X209104599Y-90031263D01* +X209104599Y-90031265D01* +X209066150Y-90224556D01* +X209066150Y-90421643D01* +X209104599Y-90614934D01* +X209104599Y-90614936D01* +X209180017Y-90797013D01* +X209200016Y-90826943D01* +X209289511Y-90960882D01* +X209428868Y-91100239D01* +X209592736Y-91209732D01* +X209774815Y-91285151D01* +X209839384Y-91297994D01* +X209892767Y-91327891D01* +X209918383Y-91383456D01* +X209906446Y-91443465D01* +X209861517Y-91484998D01* +X209835557Y-91492873D01* +X209750527Y-91506341D01* +X209548434Y-91572004D01* +X209359097Y-91668475D01* +X209187185Y-91793377D01* +X209036927Y-91943635D01* +X208912025Y-92115547D01* +X208815554Y-92304884D01* +X208749891Y-92506977D01* +X208739418Y-92573099D01* +X208739419Y-92573100D01* +X209787504Y-92573100D01* +X209749020Y-92639757D01* +X209716650Y-92760565D01* +X209716650Y-92885635D01* +X209749020Y-93006443D01* +X209787504Y-93073100D01* +X208739419Y-93073100D01* +X208749891Y-93139222D01* +X208815554Y-93341315D01* +X208912025Y-93530652D01* +X209036927Y-93702564D01* +X209187185Y-93852822D01* +X209359097Y-93977724D01* +X209548436Y-94074196D01* +X209718478Y-94129445D01* +X209767978Y-94165409D01* +X209786886Y-94223599D01* +X209767979Y-94281790D01* +X209718479Y-94317754D01* +X209687886Y-94322600D01* +X209435128Y-94322600D01* +X209435126Y-94322601D01* +X209341350Y-94337452D01* +X209341345Y-94337454D01* +X209228309Y-94395049D01* +X209138599Y-94484759D01* +X209081004Y-94597793D01* +X209078926Y-94604192D01* +X209042963Y-94653692D01* +X208984772Y-94672600D01* +X179677580Y-94672600D01* +X179551904Y-94697599D01* +X179509741Y-94715064D01* +X179471856Y-94722600D01* +X174013878Y-94722600D01* +X173907349Y-94743791D01* +X173907348Y-94743790D01* +X173888212Y-94747597D01* +X173888204Y-94747599D01* +X173769827Y-94796632D01* +X173769816Y-94796638D01* +X173663282Y-94867823D01* +X171254870Y-97276234D01* +X171183683Y-97382775D01* +X171134649Y-97501154D01* +X171134649Y-97501156D01* +X171109651Y-97626828D01* +X171109651Y-97754971D01* +X171134649Y-97880643D01* +X171134649Y-97880645D01* +X171183683Y-97999024D01* +X171253089Y-98102900D01* +X171254873Y-98105569D01* +X171345481Y-98196177D01* +X171452023Y-98267365D01* +X171452024Y-98267365D01* +X171452025Y-98267366D01* +X171465866Y-98273099D01* +X171570406Y-98316401D01* +X171696081Y-98341399D01* +X171696082Y-98341399D01* +X171824218Y-98341399D01* +X171824219Y-98341399D01* +X171949894Y-98316401D01* +X171993780Y-98298223D01* +X172018571Y-98287954D01* +X172068277Y-98267365D01* +X172174819Y-98196177D01* +X172847894Y-97523101D01* +X178466651Y-97523101D01* +X178466651Y-97573086D01* +X178477142Y-97675787D01* +X178477145Y-97675799D01* +X178532293Y-97842224D01* +X178624330Y-97991440D01* +X178748309Y-98115419D01* +X178897525Y-98207456D01* +X179063956Y-98262606D01* +X179166663Y-98273099D01* +X179441648Y-98273099D01* +X179441650Y-98273098D01* +X179441650Y-97523101D01* +X179941650Y-97523101D01* +X179941650Y-98273098D01* +X179941651Y-98273099D01* +X180216636Y-98273099D01* +X180319337Y-98262607D01* +X180319349Y-98262604D01* +X180485774Y-98207456D01* +X180634990Y-98115419D01* +X180758969Y-97991440D01* +X180851006Y-97842224D01* +X180906156Y-97675793D01* +X180916650Y-97573087D01* +X180916650Y-97523101D01* +X180916649Y-97523100D01* +X179941651Y-97523100D01* +X179941650Y-97523101D01* +X179441650Y-97523101D01* +X179441649Y-97523100D01* +X178466652Y-97523100D01* +X178466651Y-97523101D01* +X172847894Y-97523101D01* +X173397883Y-96973112D01* +X178466650Y-96973112D01* +X178466650Y-97023099D01* +X178466651Y-97023100D01* +X179441649Y-97023100D01* +X179441650Y-97023099D01* +X179441650Y-96273101D01* +X179941650Y-96273101D01* +X179941650Y-97023099D01* +X179941651Y-97023100D01* +X180916648Y-97023100D01* +X180916649Y-97023099D01* +X180916649Y-96973113D01* +X180906157Y-96870412D01* +X180906154Y-96870400D01* +X180851006Y-96703975D01* +X180758969Y-96554759D01* +X180634990Y-96430780D01* +X180485774Y-96338743D01* +X180319343Y-96283593D01* +X180216637Y-96273100D01* +X179941651Y-96273100D01* +X179941650Y-96273101D01* +X179441650Y-96273101D01* +X179441649Y-96273100D01* +X179166663Y-96273100D01* +X179063962Y-96283592D01* +X179063950Y-96283595D01* +X178897525Y-96338743D01* +X178748309Y-96430780D01* +X178624330Y-96554759D01* +X178532293Y-96703975D01* +X178477143Y-96870406D01* +X178466650Y-96973112D01* +X173397883Y-96973112D01* +X174318399Y-96052595D01* +X174372916Y-96024819D01* +X174388403Y-96023600D01* +X179767242Y-96023600D01* +X179767250Y-96023599D01* +X180198171Y-96023599D01* +X180198172Y-96023598D01* +X180239792Y-96017007D01* +X180291950Y-96008747D01* +X180291951Y-96008747D01* +X180291952Y-96008746D01* +X180291954Y-96008746D01* +X180324021Y-95992407D01* +X180339756Y-95984390D01* +X180384700Y-95973600D01* +X208984771Y-95973600D01* +X209042962Y-95992507D01* +X209078926Y-96042007D01* +X209078926Y-96042008D01* +X209081004Y-96048406D01* +X209127624Y-96139901D01* +X209138600Y-96161442D01* +X209228308Y-96251150D01* +X209341346Y-96308746D01* +X209435131Y-96323600D01* +X210948168Y-96323599D01* +X210948171Y-96323599D01* +X210948172Y-96323598D01* +X211014266Y-96313131D01* +X211041949Y-96308747D01* +X211041949Y-96308746D01* +X211041954Y-96308746D01* +X211154992Y-96251150D01* +X211244700Y-96161442D01* +X211302296Y-96048404D01* +X211317150Y-95954619D01* +X211317149Y-94691582D01* +X211317149Y-94691578D01* +X211317148Y-94691576D01* +X211302297Y-94597800D01* +X211302296Y-94597798D01* +X211302296Y-94597796D01* +X211244700Y-94484758D01* +X211154992Y-94395050D01* +X211041954Y-94337454D01* +X211041955Y-94337454D01* +X210948172Y-94322600D01* +X210695415Y-94322600D01* +X210637224Y-94303693D01* +X210601260Y-94254193D01* +X210601260Y-94193007D01* +X210637224Y-94143507D01* +X210664823Y-94129445D01* +X210834863Y-94074196D01* +X211024202Y-93977724D01* +X211196114Y-93852822D01* +X211346372Y-93702564D01* +X211471274Y-93530652D01* +X211567745Y-93341315D01* +X211633408Y-93139222D01* +X211643881Y-93073100D01* +X210595796Y-93073100D01* +X210634280Y-93006443D01* +X210666650Y-92885635D01* +X210666650Y-92760565D01* +X210634280Y-92639757D01* +X210595796Y-92573100D01* +X211643881Y-92573100D01* +X211643881Y-92573099D01* +X211633408Y-92506977D01* +X211567745Y-92304884D01* +X211471274Y-92115547D01* +X211346372Y-91943635D01* +X211196114Y-91793377D01* +X211024202Y-91668475D01* +X210834865Y-91572004D01* +X210632772Y-91506341D01* +X210547742Y-91492873D01* +X210493226Y-91465095D01* +X210465449Y-91410578D01* +X210475021Y-91350146D01* +X210518286Y-91306882D01* +X210543913Y-91297995D01* +X210608485Y-91285151D01* +X210790564Y-91209732D01* +X210954432Y-91100239D01* +X211093789Y-90960882D01* +X211203282Y-90797014D01* +X211278701Y-90614935D01* +X211317150Y-90421641D01* +X211317150Y-90224559D01* +X211278701Y-90031265D01* +X211203282Y-89849186D01* +X211093789Y-89685318D01* +X210954432Y-89545961D01* +X210819592Y-89455864D01* +X210790563Y-89436467D01* +X210608486Y-89361049D01* +X210566860Y-89352769D01* +X210521834Y-89343812D01* +X210468452Y-89313916D01* +X210442836Y-89258351D01* +X210442150Y-89246715D01* +X210442150Y-89121571D01* +X210404015Y-89029505D01* +X210404014Y-89029504D01* +X210404014Y-89029503D01* +X210365092Y-88990581D01* +X210337317Y-88936067D01* +X210346888Y-88875635D01* +X210390153Y-88832370D01* +X210415784Y-88823482D01* +X210608485Y-88785151D01* +X210790564Y-88709732D01* +X210954432Y-88600239D01* +X211093789Y-88460882D01* +X211203282Y-88297014D01* +X211278701Y-88114935D01* +X211317150Y-87921641D01* +X211317150Y-87724559D01* +X211278701Y-87531265D01* +X211203282Y-87349186D01* +X211093789Y-87185318D01* +X210954432Y-87045961D01* +X210790564Y-86936468D01* +X210790565Y-86936468D01* +X210790563Y-86936467D01* +X210608485Y-86861049D01* +X210415193Y-86822600D01* +X210415191Y-86822600D01* +X209968109Y-86822600D01* +X209968106Y-86822600D01* +X209774815Y-86861049D01* +X209774813Y-86861049D01* +X209592736Y-86936467D01* +X209428868Y-87045961D01* +X209428864Y-87045964D01* +X209289514Y-87185314D01* +X209289511Y-87185318D01* +X209180017Y-87349186D01* +X209104599Y-87531263D01* +X209104599Y-87531265D01* +X209066150Y-87724556D01* +X209066150Y-87921643D01* +X209074774Y-87964995D01* +X209104599Y-88114935D01* +X209109868Y-88127655D01* +X209180017Y-88297013D01* +X209206316Y-88336372D01* +X209289511Y-88460882D01* +X209428868Y-88600239D01* +X209562467Y-88689507D01* +X209592736Y-88709732D01* +X209642720Y-88730436D01* +X209689246Y-88770172D01* +X209703530Y-88829667D01* +X209680116Y-88886195D01* +X209627947Y-88918164D01* +X209604835Y-88920900D01* +X209184719Y-88920900D01* +X209126528Y-88901993D01* +X209114715Y-88891904D01* +X208477004Y-88254193D01* +X207833547Y-87610736D01* +X207833545Y-87610735D01* +X207833544Y-87610734D01* +X207741479Y-87572600D01* +X207741478Y-87572600D01* +X197198590Y-87572600D01* +X197140399Y-87553693D01* +X197104435Y-87504193D01* +X197104435Y-87443007D01* +X197128584Y-87403598D01* +X197182858Y-87349325D01* +X197273198Y-87214121D01* +X197335426Y-87063889D01* +X197367150Y-86904405D01* +X197367150Y-86741795D01* +X197335426Y-86582311D01* +X197273198Y-86432079D01* +X197182858Y-86296875D01* +X197067875Y-86181892D01* +X197056068Y-86174003D01* +X196941235Y-86097274D01* +X196903355Y-86049224D01* +X196900953Y-85988086D01* +X196934946Y-85937212D01* +X196965646Y-85920803D01* +X196992688Y-85912017D01* +X196992689Y-85912016D01* +X197157487Y-85828047D01* +X197178080Y-85813084D01* +X196588096Y-85223100D01* +X196594311Y-85223100D01* +X196696044Y-85195841D01* +X196787256Y-85143180D01* +X196861730Y-85068706D01* +X196914391Y-84977494D01* +X196941650Y-84875761D01* +X196941650Y-84869546D01* +X197531634Y-85459530D01* +X197546597Y-85438937D01* +X197630565Y-85274141D01* +X197687717Y-85098243D01* +X197716650Y-84915577D01* +X197716650Y-84730622D01* +X197687718Y-84547958D01* +X197644451Y-84414795D01* +X197644451Y-84414794D01* +X197636619Y-84390691D01* +X199599500Y-84390691D01* +X199599500Y-84509309D01* +X199625089Y-84604808D01* +X199630202Y-84623890D01* +X199689507Y-84726608D01* +X199689509Y-84726610D01* +X199689511Y-84726613D01* +X199773387Y-84810489D01* +X199773389Y-84810490D01* +X199773391Y-84810492D01* +X199876110Y-84869797D01* +X199876111Y-84869797D01* +X199876114Y-84869799D01* +X199990691Y-84900500D01* +X199990693Y-84900500D01* +X200109307Y-84900500D01* +X200109309Y-84900500D01* +X200223886Y-84869799D01* +X200223888Y-84869797D01* +X200223890Y-84869797D01* +X200326608Y-84810492D01* +X200326608Y-84810491D01* +X200326613Y-84810489D01* +X200407607Y-84729494D01* +X200462122Y-84701719D01* +X200477609Y-84700500D01* +X201580463Y-84700500D01* +X201638654Y-84719407D01* +X201674618Y-84768907D01* +X201678428Y-84785225D01* +X201684426Y-84826392D01* +X201720655Y-84900500D01* +X201735802Y-84931483D01* +X201818517Y-85014198D01* +X201872285Y-85040483D01* +X201923604Y-85065572D01* +X201923605Y-85065572D01* +X201923607Y-85065573D01* +X201991740Y-85075500D01* +X201991743Y-85075500D01* +X202458257Y-85075500D01* +X202458260Y-85075500D01* +X202526393Y-85065573D01* +X202631483Y-85014198D01* +X202714198Y-84931483D01* +X202765573Y-84826393D01* +X202775500Y-84758260D01* +X202775500Y-84141740D01* +X203324500Y-84141740D01* +X203324500Y-84758260D01* +X203328429Y-84785225D01* +X203334427Y-84826395D01* +X203378026Y-84915577D01* +X203385802Y-84931483D01* +X203468517Y-85014198D01* +X203563214Y-85060492D01* +X203568980Y-85063311D01* +X203612954Y-85105854D01* +X203624500Y-85152252D01* +X203624500Y-85647391D01* +X203605593Y-85705582D01* +X203595509Y-85717388D01* +X203544646Y-85768252D01* +X203539508Y-85773390D01* +X203539507Y-85773391D01* +X203480202Y-85876109D01* +X203465460Y-85931129D01* +X203449500Y-85990691D01* +X203449500Y-86109309D01* +X203471361Y-86190894D01* +X203480202Y-86223890D01* +X203539507Y-86326608D01* +X203539509Y-86326610D01* +X203539511Y-86326613D01* +X203623387Y-86410489D01* +X203623389Y-86410490D01* +X203623391Y-86410492D01* +X203726110Y-86469797D01* +X203726111Y-86469797D01* +X203726114Y-86469799D01* +X203840691Y-86500500D01* +X203840693Y-86500500D01* +X203959307Y-86500500D01* +X203959309Y-86500500D01* +X204073886Y-86469799D01* +X204073888Y-86469797D01* +X204073890Y-86469797D01* +X204176608Y-86410492D01* +X204176608Y-86410491D01* +X204176613Y-86410489D01* +X204260489Y-86326613D01* +X204260492Y-86326608D01* +X204319797Y-86223890D01* +X204319797Y-86223888D01* +X204319799Y-86223886D01* +X204350500Y-86109309D01* +X204350500Y-85990691D01* +X204319799Y-85876114D01* +X204319797Y-85876111D01* +X204319797Y-85876109D01* +X204260492Y-85773391D01* +X204260488Y-85773386D01* +X204176612Y-85689509D01* +X204174991Y-85688573D01* +X204174094Y-85687577D01* +X204171468Y-85685562D01* +X204171841Y-85685074D01* +X204134055Y-85643099D01* +X204125500Y-85602842D01* +X204125500Y-85152252D01* +X204144407Y-85094061D01* +X204181020Y-85063311D01* +X204186786Y-85060492D01* +X204281483Y-85014198D01* +X204364198Y-84931483D01* +X204415573Y-84826393D01* +X204425500Y-84758260D01* +X204425500Y-84141740D01* +X204415573Y-84073607D01* +X204410370Y-84062965D01* +X204383464Y-84007926D01* +X204364198Y-83968517D01* +X204281483Y-83885802D01* +X204272861Y-83881587D01* +X204176395Y-83834427D01* +X204149139Y-83830456D01* +X204108260Y-83824500D01* +X203641740Y-83824500D01* +X203607673Y-83829463D01* +X203573604Y-83834427D01* +X203468518Y-83885801D01* +X203385801Y-83968518D01* +X203334427Y-84073604D01* +X203331812Y-84091552D01* +X203324500Y-84141740D01* +X202775500Y-84141740D01* +X202765573Y-84073607D01* +X202760370Y-84062965D01* +X202733464Y-84007926D01* +X202714198Y-83968517D01* +X202631483Y-83885802D01* +X202622861Y-83881587D01* +X202526395Y-83834427D01* +X202499139Y-83830456D01* +X202458260Y-83824500D01* +X201991740Y-83824500D01* +X201957673Y-83829463D01* +X201923604Y-83834427D01* +X201818518Y-83885801D01* +X201735801Y-83968518D01* +X201684426Y-84073607D01* +X201678428Y-84114775D01* +X201651328Y-84169631D01* +X201597160Y-84198082D01* +X201580463Y-84199500D01* +X200477609Y-84199500D01* +X200419418Y-84180593D01* +X200407611Y-84170509D01* +X200326613Y-84089511D01* +X200326610Y-84089509D01* +X200326608Y-84089507D01* +X200223889Y-84030202D01* +X200223890Y-84030202D01* +X200165651Y-84014597D01* +X200109309Y-83999500D01* +X199990691Y-83999500D01* +X199934349Y-84014597D01* +X199876109Y-84030202D01* +X199773391Y-84089507D01* +X199689507Y-84173391D01* +X199630202Y-84276109D01* +X199624638Y-84296875D01* +X199599500Y-84390691D01* +X197636619Y-84390691D01* +X197630565Y-84372058D01* +X197546603Y-84207272D01* +X197546598Y-84207264D01* +X197531634Y-84186668D01* +X196941650Y-84776652D01* +X196941650Y-84770439D01* +X196914391Y-84668706D01* +X196861730Y-84577494D01* +X196787256Y-84503020D01* +X196696044Y-84450359D01* +X196594311Y-84423100D01* +X196588094Y-84423100D01* +X197178080Y-83833114D01* +X197157485Y-83818151D01* +X197157477Y-83818146D01* +X196992693Y-83734185D01* +X196965643Y-83725396D01* +X196916143Y-83689432D01* +X196897236Y-83631241D01* +X196916143Y-83573050D01* +X196941232Y-83548927D01* +X197067875Y-83464308D01* +X197182858Y-83349325D01* +X197273198Y-83214121D01* +X197335426Y-83063889D01* +X197367150Y-82904405D01* +X197367150Y-82741795D01* +X197335426Y-82582311D01* +X197294203Y-82482790D01* +X197273199Y-82432081D01* +X197271736Y-82429892D01* +X197182858Y-82296875D01* +X197067875Y-82181892D01* +X197067869Y-82181888D01* +X196932668Y-82091550D01* +X196782440Y-82029324D01* +X196622955Y-81997600D01* +X196460345Y-81997600D01* +X196460344Y-81997600D01* +X196300859Y-82029324D01* +X196150631Y-82091550D01* +X196015428Y-82181889D01* +X195900439Y-82296878D01* +X195810100Y-82432081D01* +X195747874Y-82582309D01* +X195716150Y-82741794D01* +X195716150Y-82904405D01* +X195747874Y-83063890D01* +X195810100Y-83214118D01* +X195831741Y-83246507D01* +X195900442Y-83349325D01* +X196015425Y-83464308D01* +X196036862Y-83478632D01* +X196142064Y-83548925D01* +X196179944Y-83596975D01* +X196182346Y-83658113D01* +X196148354Y-83708987D01* +X196117657Y-83725395D01* +X196090610Y-83734183D01* +X195925818Y-83818148D01* +X195905218Y-83833114D01* +X196495204Y-84423100D01* +X196488989Y-84423100D01* +X196387256Y-84450359D01* +X196296044Y-84503020D01* +X196221570Y-84577494D01* +X196168909Y-84668706D01* +X196141650Y-84770439D01* +X196141650Y-84776654D01* +X195551664Y-84186668D01* +X195536698Y-84207268D01* +X195452734Y-84372058D01* +X195395582Y-84547956D01* +X195366650Y-84730622D01* +X195366650Y-84915577D01* +X195395582Y-85098243D01* +X195452734Y-85274141D01* +X195536696Y-85438927D01* +X195536701Y-85438935D01* +X195551664Y-85459529D01* +X196141650Y-84869543D01* +X196141650Y-84875761D01* +X196168909Y-84977494D01* +X196221570Y-85068706D01* +X196296044Y-85143180D01* +X196387256Y-85195841D01* +X196488989Y-85223100D01* +X196495202Y-85223100D01* +X195905218Y-85813084D01* +X195925814Y-85828048D01* +X195925822Y-85828053D01* +X196090607Y-85912015D01* +X196117654Y-85920803D01* +X196131867Y-85931129D01* +X196148352Y-85937211D01* +X196156008Y-85948669D01* +X196167154Y-85956767D01* +X196172582Y-85973474D01* +X196182345Y-85988084D01* +X196181804Y-86001853D01* +X196186062Y-86014957D01* +X196180632Y-86031666D01* +X196179943Y-86049223D01* +X196171412Y-86060043D01* +X196167155Y-86073148D01* +X196142064Y-86097273D01* +X196054302Y-86155915D01* +X195999300Y-86172600D01* +X193812830Y-86172600D01* +X193766133Y-86181889D01* +X193687156Y-86197599D01* +X193687155Y-86197599D01* +X193687152Y-86197600D01* +X193568773Y-86246634D01* +X193462233Y-86317821D01* +X193344720Y-86435334D01* +X193273533Y-86541875D01* +X193224499Y-86660254D01* +X193224499Y-86660256D01* +X193199501Y-86785928D01* +X193199501Y-86785931D01* +X193199501Y-86914069D01* +X193219856Y-87016404D01* +X193224499Y-87039743D01* +X193224499Y-87039745D01* +X193273533Y-87158124D01* +X193273534Y-87158126D01* +X193273535Y-87158127D01* +X193344723Y-87264669D01* +X193435331Y-87355277D01* +X193435334Y-87355279D01* +X193489220Y-87391284D01* +X193527100Y-87439334D01* +X193529502Y-87500472D01* +X193495510Y-87551346D01* +X193438106Y-87572524D01* +X193434219Y-87572600D01* +X174848590Y-87572600D01* +X174790399Y-87553693D01* +X174754435Y-87504193D01* +X174754435Y-87443007D01* +X174778584Y-87403598D01* +X174832858Y-87349325D01* +X174923198Y-87214121D01* +X174985426Y-87063889D01* +X175017150Y-86904405D01* +X175017150Y-86741795D01* +X174985426Y-86582311D01* +X174923198Y-86432079D01* +X174832858Y-86296875D01* +X174717875Y-86181892D01* +X174706068Y-86174003D01* +X174582668Y-86091550D01* +X174432440Y-86029324D01* +X174272955Y-85997600D01* +X174110345Y-85997600D01* +X174110344Y-85997600D01* +X173950859Y-86029324D01* +X173800631Y-86091550D01* +X173665428Y-86181889D01* +X173550439Y-86296878D01* +X173460100Y-86432081D01* +X173397874Y-86582309D01* +X173366150Y-86741794D01* +X173366150Y-86904405D01* +X173397874Y-87063890D01* +X173460100Y-87214118D01* +X173525805Y-87312454D01* +X173550442Y-87349325D01* +X173604715Y-87403598D01* +X173632491Y-87458113D01* +X173622920Y-87518545D01* +X173579655Y-87561810D01* +X173534710Y-87572600D01* +X155880418Y-87572600D01* +X155822227Y-87553693D01* +X155810414Y-87543604D01* +X152971017Y-84704206D01* +X152907502Y-84640691D01* +X167399500Y-84640691D01* +X167399500Y-84759309D01* +X167423857Y-84850209D01* +X167430202Y-84873890D01* +X167489507Y-84976608D01* +X167489509Y-84976610D01* +X167489511Y-84976613D01* +X167573387Y-85060489D01* +X167573389Y-85060490D01* +X167573391Y-85060492D01* +X167676110Y-85119797D01* +X167676111Y-85119797D01* +X167676114Y-85119799D01* +X167790691Y-85150500D01* +X167790693Y-85150500D01* +X167909307Y-85150500D01* +X167909309Y-85150500D01* +X168023886Y-85119799D01* +X168080930Y-85086863D01* +X168130431Y-85073600D01* +X173335746Y-85073600D01* +X173393937Y-85092507D01* +X173427210Y-85134714D01* +X173460101Y-85214120D01* +X173500206Y-85274141D01* +X173550442Y-85349325D01* +X173665425Y-85464308D01* +X173800629Y-85554648D01* +X173800630Y-85554648D01* +X173800631Y-85554649D01* +X173875745Y-85585762D01* +X173950861Y-85616876D01* +X174110345Y-85648600D01* +X174110346Y-85648600D01* +X174272954Y-85648600D01* +X174272955Y-85648600D01* +X174432439Y-85616876D01* +X174582671Y-85554648D01* +X174717875Y-85464308D01* +X174832858Y-85349325D01* +X174923198Y-85214121D01* +X174985426Y-85063889D01* +X175017150Y-84904405D01* +X175017150Y-84741795D01* +X174985426Y-84582311D01* +X174923198Y-84432079D01* +X174832858Y-84296875D01* +X174717875Y-84181892D01* +X174705152Y-84173391D01* +X174582668Y-84091550D01* +X174432440Y-84029324D01* +X174272955Y-83997600D01* +X174110345Y-83997600D01* +X174110344Y-83997600D01* +X173950859Y-84029324D01* +X173800631Y-84091550D01* +X173665428Y-84181889D01* +X173550439Y-84296878D01* +X173460101Y-84432079D01* +X173427210Y-84511486D01* +X173387473Y-84558012D01* +X173335746Y-84572600D01* +X168353796Y-84572600D01* +X168295605Y-84553693D01* +X168268060Y-84523101D01* +X168222743Y-84444612D01* +X168210489Y-84423387D01* +X168126613Y-84339511D01* +X168126610Y-84339509D01* +X168126608Y-84339507D01* +X168023889Y-84280202D01* +X168023890Y-84280202D01* +X168008615Y-84276109D01* +X167909309Y-84249500D01* +X167790691Y-84249500D01* +X167720567Y-84268289D01* +X167676109Y-84280202D01* +X167573391Y-84339507D01* +X167489507Y-84423391D01* +X167430202Y-84526109D01* +X167415143Y-84582311D01* +X167399500Y-84640691D01* +X152907502Y-84640691D01* +X150709415Y-82442604D01* +X150681638Y-82388087D01* +X150691209Y-82327655D01* +X150734474Y-82284390D01* +X150779419Y-82273600D01* +X150905265Y-82273600D01* +X150905266Y-82273600D01* +X151088901Y-82237073D01* +X151261881Y-82165422D01* +X151261884Y-82165419D01* +X151261888Y-82165418D01* +X151307397Y-82135009D01* +X151417558Y-82061402D01* +X151549952Y-81929008D01* +X151643486Y-81789025D01* +X151653968Y-81773338D01* +X151653969Y-81773334D01* +X151653972Y-81773331D01* +X151725623Y-81600351D01* +X151762150Y-81416716D01* +X151762150Y-81229484D01* +X151725623Y-81045849D01* +X151653972Y-80872869D01* +X151653970Y-80872867D01* +X151653968Y-80872861D01* +X151585530Y-80770439D01* +X151549952Y-80717192D01* +X151417558Y-80584798D01* +X151362420Y-80547956D01* +X151261888Y-80480781D01* +X151261879Y-80480777D01* +X151088899Y-80409126D01* +X150905268Y-80372600D01* +X150905266Y-80372600D01* +X150718034Y-80372600D01* +X150718031Y-80372600D01* +X150534400Y-80409126D01* +X150361420Y-80480777D01* +X150361411Y-80480781D01* +X150205742Y-80584798D01* +X150205738Y-80584801D01* +X150073351Y-80717188D01* +X150073348Y-80717192D01* +X149969331Y-80872861D01* +X149969327Y-80872870D01* +X149897676Y-81045850D01* +X149861150Y-81229481D01* +X149861150Y-81355331D01* +X149853986Y-81377378D01* +X149850360Y-81400276D01* +X149844711Y-81405924D01* +X149842243Y-81413522D01* +X149823486Y-81427149D01* +X149807095Y-81443541D01* +X149799205Y-81444790D01* +X149792743Y-81449486D01* +X149769558Y-81449486D01* +X149746663Y-81453112D01* +X149739546Y-81449486D01* +X149731557Y-81449486D01* +X149692146Y-81425335D01* +X149652846Y-81386035D01* +X149625069Y-81331518D01* +X149623850Y-81316031D01* +X149623850Y-81273271D01* +X149585715Y-81181205D01* +X149585714Y-81181204D01* +X149585714Y-81181203D01* +X149515247Y-81110736D01* +X149515245Y-81110735D01* +X149515244Y-81110734D01* +X149423179Y-81072600D01* +X149423178Y-81072600D01* +X149262853Y-81072600D01* +X149204662Y-81053693D01* +X149171389Y-81011486D01* +X149157309Y-80977494D01* +X149113972Y-80872869D01* +X149113970Y-80872867D01* +X149113968Y-80872861D01* +X149045530Y-80770439D01* +X149009952Y-80717192D01* +X148877558Y-80584798D01* +X148822420Y-80547956D01* +X148721888Y-80480781D01* +X148721879Y-80480777D01* +X148548899Y-80409126D01* +X148365268Y-80372600D01* +X148365266Y-80372600D01* +X148178034Y-80372600D01* +X148178031Y-80372600D01* +X147994400Y-80409126D01* +X147821420Y-80480777D01* +X147821411Y-80480781D01* +X147665742Y-80584798D01* +X147665738Y-80584801D01* +X147533351Y-80717188D01* +X147533348Y-80717192D01* +X147429331Y-80872861D01* +X147429327Y-80872870D01* +X147357676Y-81045850D01* +X147321150Y-81229481D01* +X146682149Y-81229481D01* +X146645623Y-81045849D01* +X146573972Y-80872869D01* +X146573970Y-80872867D01* +X146573968Y-80872861D01* +X146505530Y-80770439D01* +X146469952Y-80717192D01* +X146337558Y-80584798D01* +X146282420Y-80547956D01* +X146181888Y-80480781D01* +X146181879Y-80480777D01* +X146008899Y-80409126D01* +X145825268Y-80372600D01* +X145825266Y-80372600D01* +X145638034Y-80372600D01* +X145638031Y-80372600D01* +X145454400Y-80409126D01* +X145281420Y-80480777D01* +X145281411Y-80480781D01* +X145125742Y-80584798D01* +X145125738Y-80584801D01* +X144993351Y-80717188D01* +X144993348Y-80717192D01* +X144889331Y-80872861D01* +X144889327Y-80872870D01* +X144817676Y-81045850D01* +X144781150Y-81229481D01* +X144142149Y-81229481D01* +X144105623Y-81045849D01* +X144033972Y-80872869D01* +X144033970Y-80872867D01* +X144033968Y-80872861D01* +X143965530Y-80770439D01* +X143929952Y-80717192D01* +X143797558Y-80584798D01* +X143742420Y-80547956D01* +X143641888Y-80480781D01* +X143641879Y-80480777D01* +X143468899Y-80409126D01* +X143285268Y-80372600D01* +X143285266Y-80372600D01* +X143098034Y-80372600D01* +X143098031Y-80372600D01* +X142914400Y-80409126D01* +X142741420Y-80480777D01* +X142741411Y-80480781D01* +X142585742Y-80584798D01* +X142585738Y-80584801D01* +X142453351Y-80717188D01* +X142453348Y-80717192D01* +X142349331Y-80872861D01* +X142349327Y-80872870D01* +X142277676Y-81045850D01* +X142241150Y-81229481D01* +X141602149Y-81229481D01* +X141565623Y-81045849D01* +X141493972Y-80872869D01* +X141493970Y-80872867D01* +X141493968Y-80872861D01* +X141425530Y-80770439D01* +X141389952Y-80717192D01* +X141257558Y-80584798D01* +X141202420Y-80547956D01* +X141101888Y-80480781D01* +X141101879Y-80480777D01* +X140928899Y-80409126D01* +X140745268Y-80372600D01* +X140745266Y-80372600D01* +X140558034Y-80372600D01* +X140558031Y-80372600D01* +X140374400Y-80409126D01* +X140201420Y-80480777D01* +X140201411Y-80480781D01* +X140045742Y-80584798D01* +X140045738Y-80584801D01* +X139913351Y-80717188D01* +X139913348Y-80717192D01* +X139809331Y-80872861D01* +X139809327Y-80872870D01* +X139737676Y-81045850D01* +X139701150Y-81229481D01* +X139062149Y-81229481D01* +X139025623Y-81045849D01* +X138953972Y-80872869D01* +X138953970Y-80872867D01* +X138953968Y-80872861D01* +X138885530Y-80770439D01* +X138849952Y-80717192D01* +X138717558Y-80584798D01* +X138662420Y-80547956D01* +X138561888Y-80480781D01* +X138561879Y-80480777D01* +X138388899Y-80409126D01* +X138205268Y-80372600D01* +X138205266Y-80372600D01* +X138018034Y-80372600D01* +X138018031Y-80372600D01* +X137834400Y-80409126D01* +X137661420Y-80480777D01* +X137661411Y-80480781D01* +X137505742Y-80584798D01* +X137505738Y-80584801D01* +X137373351Y-80717188D01* +X137373348Y-80717192D01* +X137269331Y-80872861D01* +X137269327Y-80872870D01* +X137197676Y-81045850D01* +X137161150Y-81229481D01* +X136522149Y-81229481D01* +X136485623Y-81045849D01* +X136413972Y-80872869D01* +X136413970Y-80872867D01* +X136413968Y-80872861D01* +X136345530Y-80770439D01* +X136309952Y-80717192D01* +X136177558Y-80584798D01* +X136122420Y-80547956D01* +X136021888Y-80480781D01* +X136021879Y-80480777D01* +X135848899Y-80409126D01* +X135665268Y-80372600D01* +X135665266Y-80372600D01* +X135478034Y-80372600D01* +X135478031Y-80372600D01* +X135294400Y-80409126D01* +X135121420Y-80480777D01* +X135121411Y-80480781D01* +X134965742Y-80584798D01* +X134965738Y-80584801D01* +X134833351Y-80717188D01* +X134833348Y-80717192D01* +X134729331Y-80872861D01* +X134729327Y-80872870D01* +X134657676Y-81045850D01* +X134621150Y-81229481D01* +X133982149Y-81229481D01* +X133945623Y-81045849D01* +X133873972Y-80872869D01* +X133873970Y-80872867D01* +X133873968Y-80872861D01* +X133805530Y-80770439D01* +X133769952Y-80717192D01* +X133637558Y-80584798D01* +X133582420Y-80547956D01* +X133481888Y-80480781D01* +X133481879Y-80480777D01* +X133308899Y-80409126D01* +X133125268Y-80372600D01* +X133125266Y-80372600D01* +X132938034Y-80372600D01* +X132938031Y-80372600D01* +X132754400Y-80409126D01* +X132581420Y-80480777D01* +X132581411Y-80480781D01* +X132425742Y-80584798D01* +X132425738Y-80584801D01* +X132293351Y-80717188D01* +X132293348Y-80717192D01* +X132189331Y-80872861D01* +X132189327Y-80872870D01* +X132117676Y-81045850D01* +X132081150Y-81229481D01* +X129922149Y-81229481D01* +X129885623Y-81045849D01* +X129813972Y-80872869D01* +X129813970Y-80872867D01* +X129813968Y-80872861D01* +X129745530Y-80770439D01* +X129709952Y-80717192D01* +X129577558Y-80584798D01* +X129522420Y-80547956D01* +X129421888Y-80480781D01* +X129421879Y-80480777D01* +X129248899Y-80409126D01* +X129065268Y-80372600D01* +X129065266Y-80372600D01* +X128878034Y-80372600D01* +X128878031Y-80372600D01* +X128694400Y-80409126D01* +X128521420Y-80480777D01* +X128521411Y-80480781D01* +X128365742Y-80584798D01* +X128365738Y-80584801D01* +X128233351Y-80717188D01* +X128233348Y-80717192D01* +X128129331Y-80872861D01* +X128129327Y-80872870D01* +X128057676Y-81045850D01* +X128021150Y-81229481D01* +X127382149Y-81229481D01* +X127345623Y-81045849D01* +X127273972Y-80872869D01* +X127273970Y-80872867D01* +X127273968Y-80872861D01* +X127205530Y-80770439D01* +X127169952Y-80717192D01* +X127037558Y-80584798D01* +X126982420Y-80547956D01* +X126881888Y-80480781D01* +X126881879Y-80480777D01* +X126708899Y-80409126D01* +X126525268Y-80372600D01* +X126525266Y-80372600D01* +X126338034Y-80372600D01* +X126338031Y-80372600D01* +X126154400Y-80409126D01* +X125981420Y-80480777D01* +X125981411Y-80480781D01* +X125825742Y-80584798D01* +X125825738Y-80584801D01* +X125693351Y-80717188D01* +X125693348Y-80717192D01* +X125589331Y-80872861D01* +X125589327Y-80872870D01* +X125517676Y-81045850D01* +X125481150Y-81229481D01* +X124842149Y-81229481D01* +X124805623Y-81045849D01* +X124733972Y-80872869D01* +X124733970Y-80872867D01* +X124733968Y-80872861D01* +X124665530Y-80770439D01* +X124629952Y-80717192D01* +X124497558Y-80584798D01* +X124442420Y-80547956D01* +X124341888Y-80480781D01* +X124341879Y-80480777D01* +X124168899Y-80409126D01* +X123985268Y-80372600D01* +X123985266Y-80372600D01* +X123798034Y-80372600D01* +X123798031Y-80372600D01* +X123614400Y-80409126D01* +X123441420Y-80480777D01* +X123441411Y-80480781D01* +X123285742Y-80584798D01* +X123285738Y-80584801D01* +X123153351Y-80717188D01* +X123153348Y-80717192D01* +X123049331Y-80872861D01* +X123049327Y-80872870D01* +X122977676Y-81045850D01* +X122941150Y-81229481D01* +X122302149Y-81229481D01* +X122265623Y-81045849D01* +X122193972Y-80872869D01* +X122193970Y-80872867D01* +X122193968Y-80872861D01* +X122125530Y-80770439D01* +X122089952Y-80717192D01* +X121957558Y-80584798D01* +X121902420Y-80547956D01* +X121801888Y-80480781D01* +X121801879Y-80480777D01* +X121628899Y-80409126D01* +X121445268Y-80372600D01* +X121445266Y-80372600D01* +X121258034Y-80372600D01* +X121258031Y-80372600D01* +X121074400Y-80409126D01* +X120901420Y-80480777D01* +X120901411Y-80480781D01* +X120745742Y-80584798D01* +X120745738Y-80584801D01* +X120613351Y-80717188D01* +X120613348Y-80717192D01* +X120509331Y-80872861D01* +X120509327Y-80872870D01* +X120437676Y-81045850D01* +X120401150Y-81229481D01* +X119762149Y-81229481D01* +X119725623Y-81045849D01* +X119653972Y-80872869D01* +X119653970Y-80872867D01* +X119653968Y-80872861D01* +X119585530Y-80770439D01* +X119549952Y-80717192D01* +X119417558Y-80584798D01* +X119362420Y-80547956D01* +X119261888Y-80480781D01* +X119261879Y-80480777D01* +X119088899Y-80409126D01* +X118905268Y-80372600D01* +X118905266Y-80372600D01* +X118718034Y-80372600D01* +X118718031Y-80372600D01* +X118534400Y-80409126D01* +X118361420Y-80480777D01* +X118361411Y-80480781D01* +X118205742Y-80584798D01* +X118205738Y-80584801D01* +X118073351Y-80717188D01* +X118073348Y-80717192D01* +X117969331Y-80872861D01* +X117969327Y-80872870D01* +X117897676Y-81045850D01* +X117861150Y-81229481D01* +X117222149Y-81229481D01* +X117185623Y-81045849D01* +X117113972Y-80872869D01* +X117113970Y-80872867D01* +X117113968Y-80872861D01* +X117045530Y-80770439D01* +X117009952Y-80717192D01* +X116877558Y-80584798D01* +X116822420Y-80547956D01* +X116721888Y-80480781D01* +X116721879Y-80480777D01* +X116548899Y-80409126D01* +X116365268Y-80372600D01* +X116365266Y-80372600D01* +X116178034Y-80372600D01* +X116178031Y-80372600D01* +X115994400Y-80409126D01* +X115821420Y-80480777D01* +X115821411Y-80480781D01* +X115665742Y-80584798D01* +X115665738Y-80584801D01* +X115533351Y-80717188D01* +X115533348Y-80717192D01* +X115429331Y-80872861D01* +X115429327Y-80872870D01* +X115357676Y-81045850D01* +X115321150Y-81229481D01* +X114224203Y-81229481D01* +X114197575Y-81130107D01* +X114164662Y-81073100D01* +X115008259Y-81073100D01* +X115008259Y-81073099D01* +X114999640Y-81018685D01* +X114936406Y-80824072D01* +X114843511Y-80641753D01* +X114723235Y-80476208D01* +X114578541Y-80331514D01* +X114412996Y-80211238D01* +X114230677Y-80118343D01* +X114219634Y-80114755D01* +X114170134Y-80078791D01* +X114151227Y-80020600D01* +X114170134Y-79962409D01* +X114219635Y-79926445D01* +X114250227Y-79921600D01* +X164137150Y-79921600D01* +X164195341Y-79940507D01* +X164231305Y-79990007D01* +X164236150Y-80020600D01* +X164236150Y-80638926D01* +X164241449Y-80679173D01* +X164265904Y-80770439D01* +X164275522Y-80806332D01* +X164275526Y-80806346D01* +X164289072Y-80839050D01* +X164291058Y-80843843D01* +X164332474Y-80915577D01* +X164356886Y-80957860D01* +X164381590Y-80990055D01* +X164381592Y-80990057D01* +X164381596Y-80990062D01* +X164474688Y-81083154D01* +X164474692Y-81083157D01* +X164474694Y-81083159D01* +X164488335Y-81093626D01* +X164506893Y-81107866D01* +X164620907Y-81173692D01* +X164658410Y-81189226D01* +X164785577Y-81223301D01* +X164825824Y-81228600D01* +X165391648Y-81228600D01* +X165391650Y-81228600D01* +X165469400Y-81207767D01* +X165471648Y-81205518D01* +X165526163Y-81177743D01* +X165586595Y-81187314D01* +X165611650Y-81205517D01* +X165613900Y-81207767D01* +X165691650Y-81228600D01* +X165691652Y-81228600D01* +X166257475Y-81228600D01* +X166257476Y-81228600D01* +X166297723Y-81223301D01* +X166424890Y-81189226D01* +X166462393Y-81173692D01* +X166576407Y-81107866D01* +X166608612Y-81083154D01* +X166701704Y-80990062D01* +X166726416Y-80957857D01* +X166792242Y-80843843D01* +X166807776Y-80806340D01* +X166828065Y-80730622D01* +X173016650Y-80730622D01* +X173016650Y-80915577D01* +X173045582Y-81098243D01* +X173102734Y-81274141D01* +X173186696Y-81438927D01* +X173186701Y-81438935D01* +X173201664Y-81459529D01* +X173791650Y-80869543D01* +X173791650Y-80875761D01* +X173818909Y-80977494D01* +X173871570Y-81068706D01* +X173946044Y-81143180D01* +X174037256Y-81195841D01* +X174138989Y-81223100D01* +X174145202Y-81223100D01* +X173555218Y-81813084D01* +X173575814Y-81828048D01* +X173575822Y-81828053D01* +X173740610Y-81912016D01* +X173740608Y-81912016D01* +X173767654Y-81920803D01* +X173817155Y-81956766D01* +X173836063Y-82014956D01* +X173817157Y-82073147D01* +X173792065Y-82097273D01* +X173665429Y-82181888D01* +X173550439Y-82296878D01* +X173460100Y-82432081D01* +X173397874Y-82582309D01* +X173366150Y-82741794D01* +X173366150Y-82904405D01* +X173397874Y-83063890D01* +X173460100Y-83214118D01* +X173481741Y-83246507D01* +X173550442Y-83349325D01* +X173665425Y-83464308D01* +X173800629Y-83554648D01* +X173800630Y-83554648D01* +X173800631Y-83554649D01* +X173868111Y-83582600D01* +X173950861Y-83616876D01* +X174110345Y-83648600D01* +X174110346Y-83648600D01* +X174272954Y-83648600D01* +X174272955Y-83648600D01* +X174432439Y-83616876D01* +X174582671Y-83554648D01* +X174717875Y-83464308D01* +X174832858Y-83349325D01* +X174923198Y-83214121D01* +X174985426Y-83063889D01* +X175017150Y-82904405D01* +X175017150Y-82741795D01* +X174985426Y-82582311D01* +X174944203Y-82482790D01* +X174923199Y-82432081D01* +X174921736Y-82429892D01* +X174832858Y-82296875D01* +X174717875Y-82181892D01* +X174717869Y-82181888D01* +X174591235Y-82097274D01* +X174553355Y-82049224D01* +X174550953Y-81988086D01* +X174584946Y-81937212D01* +X174615646Y-81920803D01* +X174642688Y-81912017D01* +X174642689Y-81912016D01* +X174807487Y-81828047D01* +X174828080Y-81813084D01* +X174238096Y-81223100D01* +X174244311Y-81223100D01* +X174346044Y-81195841D01* +X174437256Y-81143180D01* +X174511730Y-81068706D01* +X174564391Y-80977494D01* +X174591650Y-80875761D01* +X174591650Y-80869546D01* +X175181634Y-81459530D01* +X175196597Y-81438937D01* +X175280565Y-81274141D01* +X175337717Y-81098243D01* +X175366650Y-80915577D01* +X175366650Y-80741794D01* +X195716150Y-80741794D01* +X195716150Y-80904405D01* +X195747874Y-81063890D01* +X195810100Y-81214118D01* +X195849624Y-81273271D01* +X195900442Y-81349325D01* +X196015425Y-81464308D01* +X196150629Y-81554648D01* +X196300861Y-81616876D01* +X196460345Y-81648600D01* +X196460346Y-81648600D01* +X196622954Y-81648600D01* +X196622955Y-81648600D01* +X196782439Y-81616876D01* +X196932671Y-81554648D01* +X197067875Y-81464308D01* +X197182858Y-81349325D01* +X197273198Y-81214121D01* +X197335426Y-81063889D01* +X197367150Y-80904405D01* +X197367150Y-80741795D01* +X197335426Y-80582311D01* +X197273198Y-80432079D01* +X197182858Y-80296875D01* +X197067875Y-80181892D01* +X196992167Y-80131306D01* +X196932668Y-80091550D01* +X196782440Y-80029324D01* +X196622955Y-79997600D01* +X196460345Y-79997600D01* +X196460344Y-79997600D01* +X196300859Y-80029324D01* +X196150631Y-80091550D01* +X196015428Y-80181889D01* +X195900439Y-80296878D01* +X195810100Y-80432081D01* +X195747874Y-80582309D01* +X195716150Y-80741794D01* +X175366650Y-80741794D01* +X175366650Y-80730622D01* +X175337717Y-80547956D01* +X175280565Y-80372058D01* +X175196603Y-80207272D01* +X175196598Y-80207264D01* +X175181634Y-80186668D01* +X174591650Y-80776652D01* +X174591650Y-80770439D01* +X174564391Y-80668706D01* +X174511730Y-80577494D01* +X174437256Y-80503020D01* +X174346044Y-80450359D01* +X174244311Y-80423100D01* +X174238094Y-80423100D01* +X174828080Y-79833114D01* +X174807485Y-79818151D01* +X174807477Y-79818146D01* +X174642693Y-79734185D01* +X174615643Y-79725396D01* +X174566143Y-79689432D01* +X174547236Y-79631241D01* +X174566143Y-79573050D01* +X174591232Y-79548927D01* +X174717875Y-79464308D01* +X174832858Y-79349325D01* +X174923198Y-79214121D01* +X174985426Y-79063889D01* +X175017150Y-78904405D01* +X175017150Y-78741795D01* +X175017150Y-78741794D01* +X195716150Y-78741794D01* +X195716150Y-78904405D01* +X195747874Y-79063890D01* +X195810100Y-79214118D01* +X195899419Y-79347795D01* +X195900442Y-79349325D01* +X196015425Y-79464308D01* +X196150629Y-79554648D01* +X196300861Y-79616876D01* +X196460345Y-79648600D01* +X196460346Y-79648600D01* +X196622954Y-79648600D01* +X196622955Y-79648600D01* +X196782439Y-79616876D01* +X196932671Y-79554648D01* +X197067875Y-79464308D01* +X197182858Y-79349325D01* +X197273198Y-79214121D01* +X197335426Y-79063889D01* +X197367150Y-78904405D01* +X197367150Y-78741795D01* +X197335426Y-78582311D01* +X197297607Y-78491007D01* +X197273199Y-78432081D01* +X197248082Y-78394491D01* +X197182858Y-78296875D01* +X197067875Y-78181892D01* +X196932671Y-78091552D01* +X196932670Y-78091551D01* +X196932668Y-78091550D01* +X196782440Y-78029324D01* +X196622955Y-77997600D01* +X196460345Y-77997600D01* +X196460344Y-77997600D01* +X196300859Y-78029324D01* +X196150631Y-78091550D01* +X196015428Y-78181889D01* +X195900439Y-78296878D01* +X195810100Y-78432081D01* +X195747874Y-78582309D01* +X195716150Y-78741794D01* +X175017150Y-78741794D01* +X174985426Y-78582311D01* +X174947607Y-78491007D01* +X174923199Y-78432081D01* +X174898082Y-78394491D01* +X174832858Y-78296875D01* +X174717875Y-78181892D01* +X174582671Y-78091552D01* +X174582670Y-78091551D01* +X174582668Y-78091550D01* +X174432440Y-78029324D01* +X174272955Y-77997600D01* +X174110345Y-77997600D01* +X174110344Y-77997600D01* +X173950859Y-78029324D01* +X173800631Y-78091550D01* +X173665428Y-78181889D01* +X173550439Y-78296878D01* +X173460100Y-78432081D01* +X173397874Y-78582309D01* +X173366150Y-78741794D01* +X173366150Y-78904405D01* +X173397874Y-79063890D01* +X173460100Y-79214118D01* +X173549419Y-79347795D01* +X173550442Y-79349325D01* +X173665425Y-79464308D01* +X173665428Y-79464310D01* +X173792064Y-79548925D01* +X173829944Y-79596975D01* +X173832346Y-79658113D01* +X173798354Y-79708987D01* +X173767657Y-79725395D01* +X173740610Y-79734183D01* +X173575818Y-79818148D01* +X173555218Y-79833114D01* +X174145204Y-80423100D01* +X174138989Y-80423100D01* +X174037256Y-80450359D01* +X173946044Y-80503020D01* +X173871570Y-80577494D01* +X173818909Y-80668706D01* +X173791650Y-80770439D01* +X173791650Y-80776654D01* +X173201664Y-80186668D01* +X173186698Y-80207268D01* +X173102734Y-80372058D01* +X173045582Y-80547956D01* +X173016650Y-80730622D01* +X166828065Y-80730622D01* +X166841851Y-80679173D01* +X166847150Y-80638926D01* +X166847150Y-80621127D01* +X166848217Y-80613918D01* +X166858743Y-80592728D01* +X166866057Y-80570221D01* +X166875306Y-80559391D01* +X166875440Y-80559122D01* +X166875613Y-80559031D01* +X166876140Y-80558414D01* +X167303249Y-80131306D01* +X167325302Y-80098301D01* +X167374427Y-80024780D01* +X167423455Y-79906415D01* +X167448450Y-79780759D01* +X167448450Y-78966241D01* +X167423455Y-78840585D01* +X167374427Y-78722220D01* +X167303249Y-78615694D01* +X167212656Y-78525101D01* +X167197498Y-78514973D01* +X167106127Y-78453921D01* +X166987766Y-78404895D01* +X166862109Y-78379900D01* +X166733991Y-78379900D01* +X166733990Y-78379900D01* +X166608333Y-78404895D01* +X166489973Y-78453921D01* +X166452684Y-78478836D01* +X166393795Y-78495443D01* +X166336392Y-78474264D01* +X166302400Y-78423390D01* +X166304804Y-78362252D01* +X166327678Y-78326517D01* +X167912401Y-76741794D01* +X173366150Y-76741794D01* +X173366150Y-76904405D01* +X173397874Y-77063890D01* +X173460100Y-77214118D01* +X173460101Y-77214120D01* +X173460102Y-77214121D01* +X173550442Y-77349325D01* +X173665425Y-77464308D01* +X173800629Y-77554648D01* +X173800630Y-77554648D01* +X173800631Y-77554649D01* +X173813045Y-77559791D01* +X173950861Y-77616876D01* +X174110345Y-77648600D01* +X174110346Y-77648600D01* +X174272954Y-77648600D01* +X174272955Y-77648600D01* +X174432439Y-77616876D01* +X174582671Y-77554648D01* +X174717875Y-77464308D01* +X174832858Y-77349325D01* +X174923198Y-77214121D01* +X174985426Y-77063889D01* +X175017150Y-76904405D01* +X175017150Y-76741795D01* +X174985426Y-76582311D01* +X174923198Y-76432079D01* +X174832858Y-76296875D01* +X174717875Y-76181892D01* +X174714166Y-76179414D01* +X174582668Y-76091550D01* +X174432440Y-76029324D01* +X174272955Y-75997600D01* +X174110345Y-75997600D01* +X174110344Y-75997600D01* +X173950859Y-76029324D01* +X173800631Y-76091550D01* +X173665428Y-76181889D01* +X173550439Y-76296878D01* +X173460100Y-76432081D01* +X173397874Y-76582309D01* +X173366150Y-76741794D01* +X167912401Y-76741794D01* +X170538700Y-74115496D01* +X170593217Y-74087719D01* +X170608704Y-74086500D01* +X173267150Y-74086500D01* +X173325341Y-74105407D01* +X173361305Y-74154907D01* +X173366150Y-74185500D01* +X173366150Y-75512927D01* +X173374882Y-75556820D01* +X173374884Y-75556824D01* +X173389907Y-75579307D01* +X173408146Y-75606604D01* +X173457928Y-75639867D01* +X173468977Y-75642064D01* +X173501822Y-75648599D01* +X173501828Y-75648599D01* +X173501830Y-75648600D01* +X173501831Y-75648600D01* +X174881469Y-75648600D01* +X174881470Y-75648600D01* +X174881471Y-75648599D01* +X174881477Y-75648599D01* +X174903273Y-75644262D01* +X174925372Y-75639867D01* +X174975154Y-75606604D01* +X175008417Y-75556822D01* +X175017150Y-75512920D01* +X175017150Y-74185500D01* +X175036057Y-74127309D01* +X175085557Y-74091345D01* +X175116150Y-74086500D01* +X195267650Y-74086500D01* +X195325841Y-74105407D01* +X195361805Y-74154907D01* +X195366650Y-74185500D01* +X195366650Y-74573099D01* +X195366651Y-74573100D01* +X196225964Y-74573100D01* +X196221570Y-74577494D01* +X196168909Y-74668706D01* +X196141650Y-74770439D01* +X196141650Y-74875761D01* +X196168909Y-74977494D01* +X196221570Y-75068706D01* +X196225964Y-75073100D01* +X195366651Y-75073100D01* +X195366650Y-75073101D01* +X195366650Y-75545924D01* +X195366649Y-75545924D01* +X195373051Y-75605470D01* +X195373053Y-75605481D01* +X195423296Y-75740188D01* +X195423297Y-75740190D01* +X195509457Y-75855284D01* +X195509465Y-75855292D01* +X195624559Y-75941452D01* +X195624561Y-75941453D01* +X195759268Y-75991696D01* +X195759279Y-75991698D01* +X195818826Y-75998100D01* +X195964129Y-75998100D01* +X196022320Y-76017007D01* +X196058284Y-76066507D01* +X196058284Y-76127693D01* +X196022320Y-76177193D01* +X196019133Y-76179414D01* +X196015428Y-76181889D01* +X195900439Y-76296878D01* +X195810100Y-76432081D01* +X195747874Y-76582309D01* +X195716150Y-76741794D01* +X195716150Y-76904405D01* +X195747874Y-77063890D01* +X195810100Y-77214118D01* +X195810101Y-77214120D01* +X195810102Y-77214121D01* +X195900442Y-77349325D01* +X196015425Y-77464308D01* +X196150629Y-77554648D01* +X196150630Y-77554648D01* +X196150631Y-77554649D01* +X196163045Y-77559791D01* +X196300861Y-77616876D01* +X196460345Y-77648600D01* +X196460346Y-77648600D01* +X196622954Y-77648600D01* +X196622955Y-77648600D01* +X196782439Y-77616876D01* +X196932671Y-77554648D01* +X197067875Y-77464308D01* +X197182858Y-77349325D01* +X197200382Y-77323099D01* +X208689418Y-77323099D01* +X208689419Y-77323100D01* +X209733638Y-77323100D01* +X209700725Y-77380107D01* +X209666650Y-77507274D01* +X209666650Y-77638926D01* +X209700725Y-77766093D01* +X209733638Y-77823100D01* +X208689419Y-77823100D01* +X208699891Y-77889222D01* +X208765554Y-78091315D01* +X208862025Y-78280652D01* +X208986927Y-78452564D01* +X209137185Y-78602822D01* +X209309097Y-78727724D01* +X209498436Y-78824196D01* +X209668478Y-78879445D01* +X209717978Y-78915409D01* +X209736886Y-78973599D01* +X209717979Y-79031790D01* +X209668479Y-79067754D01* +X209637886Y-79072600D01* +X209385128Y-79072600D01* +X209385126Y-79072601D01* +X209291350Y-79087452D01* +X209291345Y-79087454D01* +X209178309Y-79145049D01* +X209088599Y-79234759D01* +X209031004Y-79347795D01* +X209016150Y-79441578D01* +X209016150Y-80704621D01* +X209016151Y-80704623D01* +X209031002Y-80798399D01* +X209031004Y-80798404D01* +X209088600Y-80911442D01* +X209178308Y-81001150D01* +X209291346Y-81058746D01* +X209385131Y-81073600D01* +X210948168Y-81073599D01* +X210948171Y-81073599D01* +X210948172Y-81073598D01* +X210995061Y-81066172D01* +X211041949Y-81058747D01* +X211041949Y-81058746D01* +X211041954Y-81058746D01* +X211154992Y-81001150D01* +X211244700Y-80911442D01* +X211302296Y-80798404D01* +X211317150Y-80704619D01* +X211317149Y-79441582D01* +X211317149Y-79441581D01* +X211317149Y-79441578D01* +X211317148Y-79441576D01* +X211302297Y-79347800D01* +X211302296Y-79347798D01* +X211302296Y-79347796D01* +X211244700Y-79234758D01* +X211154992Y-79145050D01* +X211041954Y-79087454D01* +X211041955Y-79087454D01* +X210948172Y-79072600D01* +X210695416Y-79072600D01* +X210637225Y-79053693D01* +X210601261Y-79004193D01* +X210601261Y-78943007D01* +X210637225Y-78893507D01* +X210664824Y-78879445D01* +X210834863Y-78824196D01* +X211024202Y-78727724D01* +X211196114Y-78602822D01* +X211346372Y-78452564D01* +X211471274Y-78280652D01* +X211567745Y-78091315D01* +X211633408Y-77889222D01* +X211643881Y-77823100D01* +X210599662Y-77823100D01* +X210632575Y-77766093D01* +X210666650Y-77638926D01* +X210666650Y-77507274D01* +X210632575Y-77380107D01* +X210599662Y-77323100D01* +X211643881Y-77323100D01* +X211643881Y-77323099D01* +X211633408Y-77256977D01* +X211567745Y-77054884D01* +X211471274Y-76865547D01* +X211346372Y-76693635D01* +X211196114Y-76543377D01* +X211024202Y-76418475D01* +X210834865Y-76322004D01* +X210632771Y-76256340D01* +X210422900Y-76223100D01* +X210416651Y-76223100D01* +X210416650Y-76223101D01* +X210416650Y-77140088D01* +X210359643Y-77107175D01* +X210232476Y-77073100D01* +X210100824Y-77073100D01* +X209973657Y-77107175D01* +X209916650Y-77140088D01* +X209916650Y-76223101D01* +X209916649Y-76223100D01* +X209910400Y-76223100D01* +X209700528Y-76256340D01* +X209498434Y-76322004D01* +X209309097Y-76418475D01* +X209137185Y-76543377D01* +X208986927Y-76693635D01* +X208862025Y-76865547D01* +X208765554Y-77054884D01* +X208699891Y-77256977D01* +X208689418Y-77323099D01* +X197200382Y-77323099D01* +X197273198Y-77214121D01* +X197335426Y-77063889D01* +X197367150Y-76904405D01* +X197367150Y-76741795D01* +X197335426Y-76582311D01* +X197273198Y-76432079D01* +X197182858Y-76296875D01* +X197067875Y-76181892D01* +X197067871Y-76181889D01* +X197064167Y-76179414D01* +X197026289Y-76131363D01* +X197023889Y-76070225D01* +X197057883Y-76019352D01* +X197115287Y-75998176D01* +X197119171Y-75998100D01* +X197264474Y-75998100D01* +X197324020Y-75991698D01* +X197324031Y-75991696D01* +X197458738Y-75941453D01* +X197458740Y-75941452D01* +X197573834Y-75855292D01* +X197573842Y-75855284D01* +X197660002Y-75740190D01* +X197660003Y-75740188D01* +X197710246Y-75605481D01* +X197710248Y-75605470D01* +X197716650Y-75545924D01* +X197716650Y-75073101D01* +X197716649Y-75073100D01* +X196857336Y-75073100D01* +X196861730Y-75068706D01* +X196914391Y-74977494D01* +X196941650Y-74875761D01* +X196941650Y-74770439D01* +X196914391Y-74668706D01* +X196861730Y-74577494D01* +X196857336Y-74573100D01* +X197716649Y-74573100D01* +X197716650Y-74573099D01* +X197716650Y-74185500D01* +X197735557Y-74127309D01* +X197785057Y-74091345D01* +X197815650Y-74086500D01* +X198642818Y-74086500D01* +X198642819Y-74086500D01* +X198768494Y-74061501D01* +X198886877Y-74012465D01* +X198909124Y-73997600D01* +X198993419Y-73941277D01* +X202743117Y-70191578D01* +X209016150Y-70191578D01* +X209016150Y-71454621D01* +X209016151Y-71454623D01* +X209031002Y-71548399D01* +X209031004Y-71548404D01* +X209088600Y-71661442D01* +X209178308Y-71751150D01* +X209291346Y-71808746D01* +X209385131Y-71823600D01* +X210948168Y-71823599D01* +X210948171Y-71823599D01* +X210948172Y-71823598D01* +X211001833Y-71815100D01* +X211041949Y-71808747D01* +X211041949Y-71808746D01* +X211041954Y-71808746D01* +X211154992Y-71751150D01* +X211244700Y-71661442D01* +X211302296Y-71548404D01* +X211317150Y-71454619D01* +X211317149Y-70191582D01* +X211317149Y-70191581D01* +X211317149Y-70191578D01* +X211317148Y-70191576D01* +X211302297Y-70097800D01* +X211302296Y-70097798D01* +X211302296Y-70097796D01* +X211244700Y-69984758D01* +X211154992Y-69895050D01* +X211041954Y-69837454D01* +X211041955Y-69837454D01* +X210948171Y-69822600D01* +X209385128Y-69822600D01* +X209385126Y-69822601D01* +X209291350Y-69837452D01* +X209291345Y-69837454D01* +X209178309Y-69895049D01* +X209088599Y-69984759D01* +X209031004Y-70097795D01* +X209016150Y-70191578D01* +X202743117Y-70191578D01* +X204710139Y-68224556D01* +X209016150Y-68224556D01* +X209016150Y-68421643D01* +X209054599Y-68614934D01* +X209054599Y-68614936D01* +X209130017Y-68797013D01* +X209131674Y-68799493D01* +X209239511Y-68960882D01* +X209378868Y-69100239D01* +X209542736Y-69209732D01* +X209724815Y-69285151D01* +X209918109Y-69323600D01* +X209918110Y-69323600D01* +X210415190Y-69323600D01* +X210415191Y-69323600D01* +X210608485Y-69285151D01* +X210790564Y-69209732D01* +X210954432Y-69100239D01* +X211093789Y-68960882D01* +X211203282Y-68797014D01* +X211278701Y-68614935D01* +X211317150Y-68421641D01* +X211317150Y-68224559D01* +X211278701Y-68031265D01* +X211203282Y-67849186D01* +X211093789Y-67685318D01* +X210954432Y-67545961D01* +X210844938Y-67472799D01* +X210790563Y-67436467D01* +X210608485Y-67361049D01* +X210415193Y-67322600D01* +X210415191Y-67322600D01* +X209918109Y-67322600D01* +X209918106Y-67322600D01* +X209724815Y-67361049D01* +X209724813Y-67361049D01* +X209542736Y-67436467D01* +X209378868Y-67545961D01* +X209378864Y-67545964D01* +X209239514Y-67685314D01* +X209239511Y-67685318D01* +X209130017Y-67849186D01* +X209054599Y-68031263D01* +X209054599Y-68031265D01* +X209016150Y-68224556D01* +X204710139Y-68224556D01* +X210082100Y-62852594D01* +X210136617Y-62824818D01* +X210152104Y-62823599D01* +X210948171Y-62823599D01* +X210948172Y-62823598D01* +X210995061Y-62816172D01* +X211041949Y-62808747D01* +X211041949Y-62808746D01* +X211041954Y-62808746D01* +X211154992Y-62751150D01* +X211244700Y-62661442D01* +X211302296Y-62548404D01* +X211317150Y-62454619D01* +X211317149Y-61191582D01* +X211317149Y-61191581D01* +X211317149Y-61191578D01* +X211317148Y-61191576D01* +X211302297Y-61097800D01* +X211302296Y-61097798D01* +X211302296Y-61097796D01* +X211244700Y-60984758D01* +X211154992Y-60895050D01* +X211041954Y-60837454D01* +X211041955Y-60837454D01* +X210948171Y-60822600D01* +X209435128Y-60822600D01* +X209435126Y-60822601D01* +X209341350Y-60837452D01* +X209341345Y-60837454D01* +X209228309Y-60895049D01* +X209138599Y-60984759D01* +X209081004Y-61097795D01* +X209066150Y-61191578D01* +X209066150Y-61987645D01* +X209047243Y-62045836D01* +X209037154Y-62057649D01* +X198338300Y-72756504D01* +X198283783Y-72784281D01* +X198268296Y-72785500D01* +X177517218Y-72785500D01* +X177459027Y-72766593D01* +X177423063Y-72717093D01* +X177423063Y-72655907D01* +X177447212Y-72616498D01* +X179306245Y-70757464D01* +X179306247Y-70757464D01* +X179376714Y-70686997D01* +X179397300Y-70637298D01* +X179414851Y-70594928D01* +X179414851Y-70495272D01* +X179414850Y-70495269D01* +X179414850Y-69245972D01* +X179403216Y-69217886D01* +X179376714Y-69153903D01* +X179306247Y-69083435D01* +X179306247Y-69083436D01* +X179021146Y-68798335D01* +X178993369Y-68743818D01* +X178992150Y-68728331D01* +X178992150Y-68264843D01* +X178986281Y-68224559D01* +X178982223Y-68196707D01* +X178930848Y-68091617D01* +X178848133Y-68008902D01* +X178848131Y-68008901D01* +X178743045Y-67957527D01* +X178715789Y-67953556D01* +X178674910Y-67947600D01* +X178058390Y-67947600D01* +X178024323Y-67952563D01* +X177990254Y-67957527D01* +X177885168Y-68008901D01* +X177802450Y-68091619D01* +X177797685Y-68098294D01* +X177795157Y-68096489D01* +X177762532Y-68130201D01* +X177702264Y-68140759D01* +X177647301Y-68113877D01* +X177618635Y-68059822D01* +X177617150Y-68042738D01* +X177617150Y-65525352D01* +X177636057Y-65467161D01* +X177672670Y-65436411D01* +X177773133Y-65387298D01* +X177855848Y-65304583D01* +X177907223Y-65199493D01* +X177917150Y-65131360D01* +X177917150Y-65073101D01* +X178116651Y-65073101D01* +X178116651Y-65154682D01* +X178123058Y-65225203D01* +X178123060Y-65225209D01* +X178173629Y-65387492D01* +X178173632Y-65387500D01* +X178261574Y-65532972D01* +X178381777Y-65653175D01* +X178527249Y-65741117D01* +X178527257Y-65741120D01* +X178689539Y-65791689D01* +X178689545Y-65791691D01* +X178760075Y-65798098D01* +X178766650Y-65798098D01* +X178766650Y-65073101D01* +X179266650Y-65073101D01* +X179266650Y-65798098D01* +X179266651Y-65798099D01* +X179273216Y-65798099D01* +X179273232Y-65798098D01* +X179343753Y-65791691D01* +X179343759Y-65791689D01* +X179506042Y-65741120D01* +X179506050Y-65741117D01* +X179651522Y-65653175D01* +X179771725Y-65532972D01* +X179859667Y-65387500D01* +X179859670Y-65387492D01* +X179910239Y-65225210D01* +X179910241Y-65225204D01* +X179916649Y-65154681D01* +X179916650Y-65154668D01* +X179916650Y-65073101D01* +X179916649Y-65073100D01* +X179266651Y-65073100D01* +X179266650Y-65073101D01* +X178766650Y-65073101D01* +X178766649Y-65073100D01* +X178116652Y-65073100D01* +X178116651Y-65073101D01* +X177917150Y-65073101D01* +X177917150Y-64667867D01* +X177936057Y-64609676D01* +X177946134Y-64597876D01* +X177973780Y-64570230D01* +X178028293Y-64542456D01* +X178088725Y-64552027D01* +X178113784Y-64570233D01* +X178116651Y-64573100D01* +X178766649Y-64573100D01* +X178766650Y-64573099D01* +X178766650Y-63848101D01* +X179266650Y-63848101D01* +X179266650Y-64573099D01* +X179266651Y-64573100D01* +X179916648Y-64573100D01* +X179916649Y-64573099D01* +X179916649Y-64491533D01* +X179916648Y-64491517D01* +X179910241Y-64420996D01* +X179910239Y-64420990D01* +X179859670Y-64258707D01* +X179859667Y-64258699D01* +X179771725Y-64113227D01* +X179651522Y-63993024D01* +X179506050Y-63905082D01* +X179506042Y-63905079D01* +X179343760Y-63854510D01* +X179343754Y-63854508D01* +X179273231Y-63848100D01* +X179266651Y-63848100D01* +X179266650Y-63848101D01* +X178766650Y-63848101D01* +X178766650Y-63818368D01* +X178769118Y-63810770D01* +X178767869Y-63802881D01* +X178778393Y-63782225D01* +X178785557Y-63760177D01* +X178795640Y-63748370D01* +X179891415Y-62652596D01* +X179945932Y-62624819D01* +X179961419Y-62623600D01* +X181318028Y-62623600D01* +X181376219Y-62642507D01* +X181408592Y-62682612D01* +X181414444Y-62695865D01* +X181493885Y-62775306D01* +X181596659Y-62820685D01* +X181621785Y-62823600D01* +X182834457Y-62823599D01* +X182892648Y-62842506D01* +X182928612Y-62892006D01* +X182929526Y-62950218D01* +X182894551Y-63070603D01* +X182894549Y-63070613D01* +X182894354Y-63073100D01* +X183879149Y-63073100D01* +X183879150Y-63073099D01* +X183879150Y-62523101D01* +X184379150Y-62523101D01* +X184379150Y-63073099D01* +X184379151Y-63073100D01* +X185363945Y-63073100D01* +X185363750Y-63070613D01* +X185363748Y-63070606D01* +X185317930Y-62912899D01* +X185317930Y-62912898D01* +X185234335Y-62771547D01* +X185118202Y-62655414D01* +X184976850Y-62571819D01* +X184819139Y-62525999D01* +X184782287Y-62523100D01* +X184379151Y-62523100D01* +X184379150Y-62523101D01* +X183879150Y-62523101D01* +X183879149Y-62523100D01* +X183476013Y-62523100D01* +X183439160Y-62525999D01* +X183281448Y-62571819D01* +X183280453Y-62572250D01* +X183279732Y-62572318D01* +X183275471Y-62573556D01* +X183275234Y-62572742D01* +X183219538Y-62577998D01* +X183166878Y-62546845D01* +X183142587Y-62490688D01* +X183142149Y-62481402D01* +X183142149Y-62178236D01* +X183139235Y-62153109D01* +X183093856Y-62050335D01* +X183014415Y-61970894D01* +X182911641Y-61925515D01* +X182911640Y-61925514D01* +X182911638Y-61925514D01* +X182886518Y-61922600D01* +X181621789Y-61922600D01* +X181621786Y-61922601D01* +X181596659Y-61925514D01* +X181493885Y-61970894D01* +X181414443Y-62050336D01* +X181410675Y-62058870D01* +X181408814Y-62063087D01* +X181408593Y-62063587D01* +X181367793Y-62109183D01* +X181318028Y-62122600D01* +X179766821Y-62122600D01* +X179674755Y-62160734D01* +X177666884Y-64168604D01* +X177612367Y-64196381D01* +X177596880Y-64197600D01* +X177133390Y-64197600D01* +X177100247Y-64202429D01* +X177065254Y-64207527D01* +X176960168Y-64258901D01* +X176877451Y-64341618D01* +X176826077Y-64446704D01* +X176822159Y-64473599D01* +X176816150Y-64514840D01* +X176816150Y-65131360D01* +X176821475Y-65167907D01* +X176826077Y-65199495D01* +X176844418Y-65237011D01* +X176877452Y-65304583D01* +X176960167Y-65387298D01* +X177034443Y-65423609D01* +X177060630Y-65436411D01* +X177104604Y-65478954D01* +X177116150Y-65525352D01* +X177116150Y-69197928D01* +X177154284Y-69289994D01* +X177154285Y-69289995D01* +X177154286Y-69289997D01* +X177712155Y-69847866D01* +X177739931Y-69902381D01* +X177741150Y-69917868D01* +X177741150Y-70381360D01* +X177747377Y-70424100D01* +X177751077Y-70449495D01* +X177794882Y-70539099D01* +X177802452Y-70554583D01* +X177885167Y-70637298D01* +X177938935Y-70663583D01* +X177990254Y-70688672D01* +X177990255Y-70688672D01* +X177990257Y-70688673D01* +X178058390Y-70698600D01* +X178417582Y-70698600D01* +X178475773Y-70717507D01* +X178511737Y-70767007D01* +X178511737Y-70828193D01* +X178487586Y-70867603D01* +X177806790Y-71548399D01* +X177216885Y-72138304D01* +X177162368Y-72166081D01* +X177146881Y-72167300D01* +X158199418Y-72167300D01* +X158141227Y-72148393D01* +X158105263Y-72098893D01* +X158105263Y-72037707D01* +X158129412Y-71998298D01* +X162054608Y-68073101D01* +X166791651Y-68073101D01* +X166791651Y-68873086D01* +X166802142Y-68975787D01* +X166802145Y-68975799D01* +X166857293Y-69142224D01* +X166949330Y-69291440D01* +X167073309Y-69415419D01* +X167222525Y-69507456D01* +X167388956Y-69562606D01* +X167491662Y-69573099D01* +X167941648Y-69573099D01* +X167941650Y-69573098D01* +X167941650Y-68073101D01* +X168441650Y-68073101D01* +X168441650Y-69573098D01* +X168441651Y-69573099D01* +X168891636Y-69573099D01* +X168994337Y-69562607D01* +X168994349Y-69562604D01* +X169160774Y-69507456D01* +X169309990Y-69415419D01* +X169433969Y-69291440D01* +X169526006Y-69142224D01* +X169581156Y-68975793D01* +X169591650Y-68873087D01* +X169591650Y-68073101D01* +X169591649Y-68073100D01* +X168441651Y-68073100D01* +X168441650Y-68073101D01* +X167941650Y-68073101D01* +X167941649Y-68073100D01* +X166791652Y-68073100D01* +X166791651Y-68073101D01* +X162054608Y-68073101D01* +X163354597Y-66773112D01* +X166791650Y-66773112D01* +X166791650Y-67573099D01* +X166791651Y-67573100D01* +X167941649Y-67573100D01* +X167941650Y-67573099D01* +X167941650Y-66073101D01* +X168441650Y-66073101D01* +X168441650Y-67573099D01* +X168441651Y-67573100D01* +X169591648Y-67573100D01* +X169591649Y-67573099D01* +X169591649Y-66773113D01* +X169581157Y-66670412D01* +X169581154Y-66670400D01* +X169526006Y-66503975D01* +X169433969Y-66354759D01* +X169309990Y-66230780D01* +X169160774Y-66138743D01* +X168994343Y-66083593D01* +X168891637Y-66073100D01* +X168441651Y-66073100D01* +X168441650Y-66073101D01* +X167941650Y-66073101D01* +X167941649Y-66073100D01* +X167491663Y-66073100D01* +X167388962Y-66083592D01* +X167388950Y-66083595D01* +X167222525Y-66138743D01* +X167073309Y-66230780D01* +X166949330Y-66354759D01* +X166857293Y-66503975D01* +X166802143Y-66670406D01* +X166791650Y-66773112D01* +X163354597Y-66773112D01* +X164250714Y-65876995D01* +X164305231Y-65849219D01* +X164320718Y-65848000D01* +X169403341Y-65848000D01* +X169461532Y-65866907D01* +X169473338Y-65876990D01* +X169554337Y-65957989D01* +X169554339Y-65957990D01* +X169554341Y-65957992D01* +X169657060Y-66017297D01* +X169657061Y-66017297D01* +X169657064Y-66017299D01* +X169771641Y-66048000D01* +X169771643Y-66048000D01* +X169890257Y-66048000D01* +X169890259Y-66048000D01* +X170004836Y-66017299D01* +X170004838Y-66017297D01* +X170004840Y-66017297D01* +X170107558Y-65957992D01* +X170107558Y-65957991D01* +X170107563Y-65957989D01* +X170191439Y-65874113D01* +X170191442Y-65874108D01* +X170250747Y-65771390D01* +X170250747Y-65771388D01* +X170250749Y-65771386D01* +X170281450Y-65656809D01* +X170281450Y-65538191D01* +X170250749Y-65423614D01* +X170250747Y-65423611D01* +X170250747Y-65423609D01* +X170191442Y-65320891D01* +X170191440Y-65320889D01* +X170191439Y-65320887D01* +X170107563Y-65237011D01* +X170107560Y-65237009D01* +X170107558Y-65237007D01* +X170004839Y-65177702D01* +X170004840Y-65177702D01* +X169991301Y-65174074D01* +X169890259Y-65147000D01* +X169771641Y-65147000D01* +X169723905Y-65159791D01* +X169657059Y-65177702D01* +X169554341Y-65237007D01* +X169554340Y-65237008D01* +X169554337Y-65237010D01* +X169554337Y-65237011D01* +X169473342Y-65318005D01* +X169418828Y-65345781D01* +X169403341Y-65347000D01* +X169107979Y-65347000D01* +X169049788Y-65328093D01* +X169013824Y-65278593D01* +X169013824Y-65217407D01* +X169049788Y-65167907D01* +X169063033Y-65159791D01* +X169079992Y-65151150D01* +X169169700Y-65061442D01* +X169227296Y-64948404D01* +X169242150Y-64854619D01* +X169242149Y-62791582D01* +X169242149Y-62791581D01* +X169242149Y-62791578D01* +X169242148Y-62791576D01* +X169227297Y-62697800D01* +X169227296Y-62697798D01* +X169227296Y-62697796D01* +X169169700Y-62584758D01* +X169164143Y-62579201D01* +X169136368Y-62524687D01* +X169145939Y-62464255D01* +X169189204Y-62420990D01* +X169234149Y-62410200D01* +X170994118Y-62410200D01* +X170994119Y-62410200D01* +X171119794Y-62385201D01* +X171238177Y-62336165D01* +X171257473Y-62323272D01* +X171344719Y-62264977D01* +X172707604Y-60902091D01* +X181242950Y-60902091D01* +X181242950Y-61020709D01* +X181261973Y-61091704D01* +X181273652Y-61135290D01* +X181332957Y-61238008D01* +X181332959Y-61238010D01* +X181332961Y-61238013D01* +X181416837Y-61321889D01* +X181416839Y-61321890D01* +X181416841Y-61321892D01* +X181519560Y-61381197D01* +X181519561Y-61381197D01* +X181519564Y-61381199D01* +X181634141Y-61411900D01* +X181634143Y-61411900D01* +X181752757Y-61411900D01* +X181752759Y-61411900D01* +X181867336Y-61381199D01* +X181867338Y-61381197D01* +X181867340Y-61381197D01* +X181970058Y-61321892D01* +X181970058Y-61321891D01* +X181970063Y-61321889D01* +X182053939Y-61238013D01* +X182063987Y-61220609D01* +X182113247Y-61135290D01* +X182113247Y-61135288D01* +X182113249Y-61135286D01* +X182143950Y-61020709D01* +X182143950Y-60902091D01* +X182113249Y-60787514D01* +X182113247Y-60787511D01* +X182113247Y-60787509D01* +X182053942Y-60684791D01* +X182053940Y-60684789D01* +X182053939Y-60684787D01* +X181970063Y-60600911D01* +X181970060Y-60600909D01* +X181970058Y-60600907D01* +X181867339Y-60541602D01* +X181867340Y-60541602D01* +X181851852Y-60537452D01* +X181752759Y-60510900D01* +X181634141Y-60510900D01* +X181577034Y-60526202D01* +X181519559Y-60541602D01* +X181416841Y-60600907D01* +X181332957Y-60684791D01* +X181273652Y-60787509D01* +X181258909Y-60842532D01* +X181242950Y-60902091D01* +X172707604Y-60902091D01* +X173662195Y-59947499D01* +X173688715Y-59928566D01* +X173773133Y-59887298D01* +X173855848Y-59804583D01* +X173907223Y-59699493D01* +X173907223Y-59699491D01* +X173909493Y-59692146D01* +X173910740Y-59692531D01* +X173922360Y-59662288D01* +X173927443Y-59654681D01* +X173943115Y-59631227D01* +X173992151Y-59512843D01* +X174017150Y-59387169D01* +X174017150Y-59259031D01* +X173992151Y-59133356D01* +X173943115Y-59014973D01* +X173922359Y-58983909D01* +X173913532Y-58967560D01* +X173908548Y-58955809D01* +X173907223Y-58946707D01* +X173888099Y-58907588D01* +X173887066Y-58905152D01* +X173884629Y-58877196D01* +X173880697Y-58849399D01* +X173881994Y-58846953D01* +X173881754Y-58844198D01* +X173896216Y-58820146D01* +X173909372Y-58795349D01* +X173911857Y-58794133D01* +X173913284Y-58791762D01* +X173939124Y-58780803D01* +X173964341Y-58768476D01* +X173968961Y-58768150D01* +X173969614Y-58767874D01* +X173970379Y-58768051D01* +X173978209Y-58767500D01* +X174405090Y-58767500D01* +X174463281Y-58786407D01* +X174499245Y-58835907D01* +X174499245Y-58897093D01* +X174494031Y-58909980D01* +X174476077Y-58946704D01* +X174473817Y-58962219D01* +X174466150Y-59014840D01* +X174466150Y-59631360D01* +X174468640Y-59648447D01* +X174469307Y-59653027D01* +X174458986Y-59713336D01* +X174415188Y-59756060D01* +X174371341Y-59766300D01* +X174301441Y-59766300D01* +X174231317Y-59785089D01* +X174186859Y-59797002D01* +X174084141Y-59856307D01* +X174000257Y-59940191D01* +X173940952Y-60042909D01* +X173925592Y-60100235D01* +X173910250Y-60157491D01* +X173910250Y-60276109D01* +X173931257Y-60354508D01* +X173940952Y-60390690D01* +X174000257Y-60493408D01* +X174000259Y-60493410D01* +X174000261Y-60493413D01* +X174084137Y-60577289D01* +X174084139Y-60577290D01* +X174084141Y-60577292D01* +X174186860Y-60636597D01* +X174186861Y-60636597D01* +X174186864Y-60636599D01* +X174301441Y-60667300D01* +X174301443Y-60667300D01* +X174420057Y-60667300D01* +X174420059Y-60667300D01* +X174534636Y-60636599D01* +X174534638Y-60636597D01* +X174534640Y-60636597D01* +X174637358Y-60577292D01* +X174637358Y-60577291D01* +X174637363Y-60577289D01* +X174721239Y-60493413D01* +X174743883Y-60454193D01* +X174780547Y-60390690D01* +X174780547Y-60390688D01* +X174780549Y-60390686D01* +X174811250Y-60276109D01* +X174811250Y-60161566D01* +X174813718Y-60153968D01* +X174812469Y-60146079D01* +X174822992Y-60125425D01* +X174830157Y-60103375D01* +X174840247Y-60091562D01* +X174954214Y-59977596D01* +X175008730Y-59949819D01* +X175024217Y-59948600D01* +X175249907Y-59948600D01* +X175249910Y-59948600D01* +X175318043Y-59938673D01* +X175423133Y-59887298D01* +X175505848Y-59804583D01* +X175557223Y-59699493D01* +X175562644Y-59662288D01* +X175563222Y-59658325D01* +X175590322Y-59603469D01* +X175644490Y-59575018D01* +X175661187Y-59573600D01* +X176722113Y-59573600D01* +X176780304Y-59592507D01* +X176816268Y-59642007D01* +X176820078Y-59658325D01* +X176826076Y-59699492D01* +X176858737Y-59766300D01* +X176877452Y-59804583D01* +X176960167Y-59887298D01* +X176993704Y-59903693D01* +X177065254Y-59938672D01* +X177065255Y-59938672D01* +X177065257Y-59938673D01* +X177133390Y-59948600D01* +X177133393Y-59948600D01* +X177599907Y-59948600D01* +X177599910Y-59948600D01* +X177668043Y-59938673D01* +X177773133Y-59887298D01* +X177855848Y-59804583D01* +X177907223Y-59699493D01* +X177917150Y-59631360D01* +X177917150Y-59573101D01* +X178116651Y-59573101D01* +X178116651Y-59654682D01* +X178123058Y-59725203D01* +X178123060Y-59725209D01* +X178173629Y-59887492D01* +X178173632Y-59887500D01* +X178261574Y-60032972D01* +X178381777Y-60153175D01* +X178527249Y-60241117D01* +X178527257Y-60241120D01* +X178689539Y-60291689D01* +X178689545Y-60291691D01* +X178760075Y-60298098D01* +X178766650Y-60298098D01* +X178766650Y-59573101D01* +X179266650Y-59573101D01* +X179266650Y-60298098D01* +X179266651Y-60298099D01* +X179273216Y-60298099D01* +X179273232Y-60298098D01* +X179343753Y-60291691D01* +X179343759Y-60291689D01* +X179506042Y-60241120D01* +X179506050Y-60241117D01* +X179651522Y-60153175D01* +X179771725Y-60032972D01* +X179859667Y-59887500D01* +X179859670Y-59887492D01* +X179910239Y-59725210D01* +X179910241Y-59725204D01* +X179916649Y-59654681D01* +X179916650Y-59654668D01* +X179916650Y-59573101D01* +X179916649Y-59573100D01* +X179266651Y-59573100D01* +X179266650Y-59573101D01* +X178766650Y-59573101D01* +X178766649Y-59573100D01* +X178116652Y-59573100D01* +X178116651Y-59573101D01* +X177917150Y-59573101D01* +X177917150Y-59014840D01* +X177907223Y-58946707D01* +X177907222Y-58946704D01* +X177889269Y-58909980D01* +X177888265Y-58902888D01* +X177884055Y-58897093D01* +X177884055Y-58873126D01* +X177880698Y-58849398D01* +X177884055Y-58843070D01* +X177884055Y-58835907D01* +X177898143Y-58816516D01* +X177909374Y-58795348D01* +X177915808Y-58792202D01* +X177920019Y-58786407D01* +X177942812Y-58779001D01* +X177964342Y-58768476D01* +X177978210Y-58767500D01* +X178036345Y-58767500D01* +X178094536Y-58786407D01* +X178130500Y-58835907D01* +X178130862Y-58895953D01* +X178123060Y-58920989D01* +X178123058Y-58920995D01* +X178116650Y-58991518D01* +X178116650Y-59073099D01* +X178116651Y-59073100D01* +X179916648Y-59073100D01* +X179916649Y-59073099D01* +X179916649Y-58991533D01* +X179916648Y-58991517D01* +X179910241Y-58920996D01* +X179910239Y-58920990D01* +X179902438Y-58895953D01* +X179903177Y-58834772D01* +X179939736Y-58785710D01* +X179996955Y-58767500D01* +X188120103Y-58767500D01* +X188178294Y-58786407D01* +X188214256Y-58835904D01* +X188216951Y-58844198D01* +X188217940Y-58847242D01* +X188300152Y-59008591D01* +X188300154Y-59008594D01* +X188406597Y-59155101D01* +X188534649Y-59283153D01* +X188681156Y-59389596D01* +X188842511Y-59471811D01* +X189014741Y-59527771D01* +X189123271Y-59544960D01* +X189177783Y-59572733D01* +X193565886Y-63960835D01* +X193691315Y-64086264D01* +X193838803Y-64184813D01* +X193869672Y-64197599D01* +X193869673Y-64197600D01* +X193869674Y-64197600D01* +X194002684Y-64252695D01* +X194176659Y-64287300D01* +X194176660Y-64287300D01* +X199866641Y-64287300D01* +X199866642Y-64287300D01* +X200040616Y-64252695D01* +X200148211Y-64208127D01* +X200204497Y-64184813D01* +X200204499Y-64184811D01* +X200204504Y-64184809D01* +X200305922Y-64117043D01* +X200305923Y-64117042D01* +X200308943Y-64115024D01* +X200351986Y-64086264D01* +X202041114Y-62397135D01* +X202139663Y-62249646D01* +X202207545Y-62085766D01* +X202242150Y-61911792D01* +X202242150Y-61734408D01* +X202207545Y-61560434D01* +X202139663Y-61396553D01* +X202139661Y-61396551D01* +X202139659Y-61396545D01* +X202079484Y-61306489D01* +X202041114Y-61249064D01* +X201915686Y-61123636D01* +X201872620Y-61094860D01* +X201768204Y-61025090D01* +X201768195Y-61025086D01* +X201604314Y-60957204D01* +X201430344Y-60922600D01* +X201430342Y-60922600D01* +X201252958Y-60922600D01* +X201252955Y-60922600D01* +X201078985Y-60957204D01* +X200915104Y-61025086D01* +X200767616Y-61123635D01* +X199433946Y-62457304D01* +X199379429Y-62485081D01* +X199363942Y-62486300D01* +X198702323Y-62486300D01* +X198644132Y-62467393D01* +X198608168Y-62417893D01* +X198608168Y-62356707D01* +X198613382Y-62343820D01* +X198623427Y-62323272D01* +X198631516Y-62306725D01* +X198642150Y-62233736D01* +X198642150Y-61653223D01* +X198661057Y-61595032D01* +X198671146Y-61583219D01* +X201549870Y-58704496D01* +X201604387Y-58676719D01* +X201619874Y-58675500D01* +X202894877Y-58675500D01* +X202953068Y-58694407D01* +X202964881Y-58704496D01* +X204095504Y-59835119D01* +X204123281Y-59889636D01* +X204124500Y-59905123D01* +X204124500Y-62594876D01* +X204105593Y-62653067D01* +X204095504Y-62664880D01* +X196564881Y-70195504D01* +X196510364Y-70223281D01* +X196494877Y-70224500D01* +X186855124Y-70224500D01* +X186796933Y-70205593D01* +X186785120Y-70195504D01* +X182558646Y-65969030D01* +X182541333Y-65935050D01* +X188133650Y-65935050D01* +X188133650Y-66116149D01* +X188161978Y-66295006D01* +X188181392Y-66354759D01* +X188217939Y-66467239D01* +X188300154Y-66628594D01* +X188406597Y-66775101D01* +X188534649Y-66903153D01* +X188681156Y-67009596D01* +X188842511Y-67091811D01* +X189014741Y-67147771D01* +X189086286Y-67159102D01* +X189193601Y-67176100D01* +X189193604Y-67176100D01* +X189374699Y-67176100D01* +X189464127Y-67161935D01* +X189553559Y-67147771D01* +X189725789Y-67091811D01* +X189887144Y-67009596D01* +X190033651Y-66903153D01* +X190161703Y-66775101D01* +X190268146Y-66628594D01* +X190350361Y-66467239D01* +X190406321Y-66295009D01* +X190434650Y-66116146D01* +X190434650Y-65935054D01* +X190434650Y-65935050D01* +X193213650Y-65935050D01* +X193213650Y-66116149D01* +X193241978Y-66295006D01* +X193261392Y-66354759D01* +X193297939Y-66467239D01* +X193380154Y-66628594D01* +X193486597Y-66775101D01* +X193614649Y-66903153D01* +X193761156Y-67009596D01* +X193922511Y-67091811D01* +X194094741Y-67147771D01* +X194166286Y-67159102D01* +X194273601Y-67176100D01* +X194273604Y-67176100D01* +X194454699Y-67176100D01* +X194544127Y-67161935D01* +X194633559Y-67147771D01* +X194805789Y-67091811D01* +X194967144Y-67009596D01* +X195113651Y-66903153D01* +X195241703Y-66775101D01* +X195348146Y-66628594D01* +X195430361Y-66467239D01* +X195486321Y-66295009D01* +X195514650Y-66116146D01* +X195514650Y-65935054D01* +X195514650Y-65935050D01* +X195494095Y-65805277D01* +X195486321Y-65756191D01* +X195430361Y-65583961D01* +X195348146Y-65422606D01* +X195241703Y-65276099D01* +X195113651Y-65148047D01* +X194967144Y-65041604D01* +X194967143Y-65041603D01* +X194967141Y-65041602D01* +X194805787Y-64959388D01* +X194633556Y-64903428D01* +X194454699Y-64875100D01* +X194454696Y-64875100D01* +X194273604Y-64875100D01* +X194273601Y-64875100D01* +X194094743Y-64903428D01* +X193922512Y-64959388D01* +X193761158Y-65041602D01* +X193733851Y-65061442D01* +X193614649Y-65148047D01* +X193486597Y-65276099D01* +X193444538Y-65333989D01* +X193380152Y-65422608D01* +X193297938Y-65583962D01* +X193241978Y-65756193D01* +X193213650Y-65935050D01* +X190434650Y-65935050D01* +X190414095Y-65805277D01* +X190406321Y-65756191D01* +X190350361Y-65583961D01* +X190268146Y-65422606D01* +X190161703Y-65276099D01* +X190033651Y-65148047D01* +X189887144Y-65041604D01* +X189887143Y-65041603D01* +X189887141Y-65041602D01* +X189725787Y-64959388D01* +X189553556Y-64903428D01* +X189374699Y-64875100D01* +X189374696Y-64875100D01* +X189193604Y-64875100D01* +X189193601Y-64875100D01* +X189014743Y-64903428D01* +X188842512Y-64959388D01* +X188681158Y-65041602D01* +X188653851Y-65061442D01* +X188534649Y-65148047D01* +X188406597Y-65276099D01* +X188364538Y-65333989D01* +X188300152Y-65422608D01* +X188217938Y-65583962D01* +X188161978Y-65756193D01* +X188133650Y-65935050D01* +X182541333Y-65935050D01* +X182530869Y-65914513D01* +X182529650Y-65899026D01* +X182529650Y-64822599D01* +X182548557Y-64764408D01* +X182598057Y-64728444D01* +X182628650Y-64723599D01* +X182886511Y-64723599D01* +X182886514Y-64723599D01* +X182911641Y-64720685D01* +X183014415Y-64675306D01* +X183093856Y-64595865D01* +X183139235Y-64493091D01* +X183142150Y-64467965D01* +X183142149Y-64164812D01* +X183161056Y-64106623D01* +X183210556Y-64070659D01* +X183271741Y-64070658D01* +X183280464Y-64073954D01* +X183281452Y-64074381D01* +X183439160Y-64120200D01* +X183476013Y-64123100D01* +X183879149Y-64123100D01* +X183879150Y-64123099D01* +X183879150Y-63573101D01* +X184379150Y-63573101D01* +X184379150Y-64123099D01* +X184379151Y-64123100D01* +X184782287Y-64123100D01* +X184819139Y-64120200D01* +X184976850Y-64074380D01* +X184976851Y-64074380D01* +X185118202Y-63990785D01* +X185234335Y-63874652D01* +X185317930Y-63733301D01* +X185317930Y-63733300D01* +X185363748Y-63575593D01* +X185363750Y-63575586D01* +X185363946Y-63573100D01* +X184379151Y-63573100D01* +X184379150Y-63573101D01* +X183879150Y-63573101D01* +X183879149Y-63573100D01* +X182894354Y-63573100D01* +X182894549Y-63575586D01* +X182894551Y-63575593D01* +X182929526Y-63695980D01* +X182927604Y-63757135D01* +X182890103Y-63805481D01* +X182834457Y-63822600D01* +X181621789Y-63822600D01* +X181621786Y-63822601D01* +X181596659Y-63825514D01* +X181493885Y-63870894D01* +X181414444Y-63950335D01* +X181369064Y-64053111D01* +X181366150Y-64078230D01* +X181366150Y-64467960D01* +X181366151Y-64467963D01* +X181369064Y-64493090D01* +X181380905Y-64519907D01* +X181414444Y-64595865D01* +X181493885Y-64675306D01* +X181596659Y-64720685D01* +X181621785Y-64723600D01* +X181879650Y-64723599D01* +X181937840Y-64742506D01* +X181973804Y-64792006D01* +X181978650Y-64822599D01* +X181978650Y-66108950D01* +X182020593Y-66210208D01* +X186543941Y-70733557D01* +X186571083Y-70744799D01* +X186571086Y-70744802D01* +X186571087Y-70744801D01* +X186645200Y-70775500D01* +X186645201Y-70775500D01* +X196704799Y-70775500D01* +X196704800Y-70775500D01* +X196806058Y-70733557D01* +X196883557Y-70656058D01* +X196883556Y-70656058D01* +X204633557Y-62906059D01* +X204657438Y-62848404D01* +X204675500Y-62804800D01* +X204675500Y-59695200D01* +X204633557Y-59593942D01* +X204633557Y-59593941D01* +X203206058Y-58166443D01* +X203104800Y-58124500D01* +X201409950Y-58124500D01* +X201353700Y-58147800D01* +X201353699Y-58147800D01* +X201308693Y-58166441D01* +X198424908Y-61050225D01* +X198370391Y-61078002D01* +X198340633Y-61078186D01* +X198302286Y-61072600D01* +X197781014Y-61072600D01* +X197737220Y-61078980D01* +X197708023Y-61083234D01* +X197595434Y-61138276D01* +X197593260Y-61140451D01* +X197590216Y-61142001D01* +X197588759Y-61143042D01* +X197588603Y-61142823D01* +X197538742Y-61168225D01* +X197478310Y-61158650D01* +X197453257Y-61140447D01* +X195389980Y-59077169D01* +X195362203Y-59022652D01* +X195371773Y-58962222D01* +X195430361Y-58847239D01* +X195486321Y-58675009D01* +X195514650Y-58496146D01* +X195514650Y-58315054D01* +X195514650Y-58315050D01* +X195491146Y-58166654D01* +X195486321Y-58136191D01* +X195430361Y-57963961D01* +X195348146Y-57802606D01* +X195241703Y-57656099D01* +X195113651Y-57528047D01* +X194967144Y-57421604D01* +X194967143Y-57421603D01* +X194967141Y-57421602D01* +X194805787Y-57339388D01* +X194633556Y-57283428D01* +X194454699Y-57255100D01* +X194454696Y-57255100D01* +X194273604Y-57255100D01* +X194273601Y-57255100D01* +X194094743Y-57283428D01* +X193922512Y-57339388D01* +X193761158Y-57421602D01* +X193738079Y-57438370D01* +X193614649Y-57528047D01* +X193486597Y-57656099D01* +X193436320Y-57725300D01* +X193380152Y-57802608D01* +X193297938Y-57963962D01* +X193241978Y-58136193D01* +X193213650Y-58315050D01* +X193213650Y-58496149D01* +X193241978Y-58675006D01* +X193297938Y-58847237D01* +X193377911Y-59004193D01* +X193380154Y-59008594D01* +X193486597Y-59155101D01* +X193614649Y-59283153D01* +X193761156Y-59389596D01* +X193922511Y-59471811D01* +X194094741Y-59527771D01* +X194166286Y-59539102D01* +X194273601Y-59556100D01* +X194273604Y-59556100D01* +X194454699Y-59556100D01* +X194544127Y-59541935D01* +X194633559Y-59527771D01* +X194805789Y-59471811D01* +X194920770Y-59413224D01* +X194981201Y-59403653D01* +X195035718Y-59431430D01* +X195035719Y-59431430D01* +X197412154Y-61807864D01* +X197439931Y-61862381D01* +X197441150Y-61877868D01* +X197441150Y-62233736D01* +X197448667Y-62285331D01* +X197451784Y-62306726D01* +X197451785Y-62306728D01* +X197469918Y-62343820D01* +X197478489Y-62404402D01* +X197449813Y-62458452D01* +X197394845Y-62485324D01* +X197380977Y-62486300D01* +X194679357Y-62486300D01* +X194621166Y-62467393D01* +X194609353Y-62457304D01* +X192536456Y-60384407D01* +X190451284Y-58299234D01* +X190423510Y-58244722D01* +X190406321Y-58136191D01* +X190350361Y-57963961D01* +X190268146Y-57802606D01* +X190161703Y-57656099D01* +X190033651Y-57528047D01* +X189887144Y-57421604D01* +X189887143Y-57421603D01* +X189887141Y-57421602D01* +X189725787Y-57339388D01* +X189553556Y-57283428D01* +X189445028Y-57266239D01* +X189390513Y-57238463D01* +X189337151Y-57185101D01* +X189309376Y-57130587D01* +X189318947Y-57070155D01* +X189362212Y-57026890D01* +X189407157Y-57016100D01* +X190298969Y-57016100D01* +X190298970Y-57016100D01* +X190298971Y-57016099D01* +X190298977Y-57016099D01* +X190320773Y-57011762D01* +X190342872Y-57007367D01* +X190392654Y-56974104D01* +X190425917Y-56924322D01* +X190433613Y-56885635D01* +X190434649Y-56880427D01* +X190434650Y-56880418D01* +X190434650Y-55775050D01* +X193213650Y-55775050D01* +X193213650Y-55956149D01* +X193241978Y-56135006D01* +X193297938Y-56307237D01* +X193379864Y-56468026D01* +X193380154Y-56468594D01* +X193486597Y-56615101D01* +X193614649Y-56743153D01* +X193761156Y-56849596D01* +X193922511Y-56931811D01* +X194094741Y-56987771D01* +X194166286Y-56999102D01* +X194273601Y-57016100D01* +X194273604Y-57016100D01* +X194454699Y-57016100D01* +X194549365Y-57001106D01* +X194633559Y-56987771D01* +X194729706Y-56956531D01* +X194751797Y-56949354D01* +X194765646Y-56944854D01* +X194805789Y-56931811D01* +X194967144Y-56849596D01* +X195113651Y-56743153D01* +X195241703Y-56615101D01* +X195272219Y-56573099D01* +X208739418Y-56573099D01* +X208739419Y-56573100D01* +X209787504Y-56573100D01* +X209749020Y-56639757D01* +X209716650Y-56760565D01* +X209716650Y-56885635D01* +X209749020Y-57006443D01* +X209787504Y-57073100D01* +X208739419Y-57073100D01* +X208749891Y-57139222D01* +X208815554Y-57341315D01* +X208912025Y-57530652D01* +X209036927Y-57702564D01* +X209187185Y-57852822D01* +X209359097Y-57977724D01* +X209548434Y-58074195D01* +X209750528Y-58139859D01* +X209835556Y-58153326D01* +X209890072Y-58181103D01* +X209917850Y-58235620D01* +X209908279Y-58296052D01* +X209865014Y-58339317D01* +X209839384Y-58348205D01* +X209774813Y-58361049D01* +X209592736Y-58436467D01* +X209428868Y-58545961D01* +X209428864Y-58545964D01* +X209289514Y-58685314D01* +X209289511Y-58685318D01* +X209180017Y-58849186D01* +X209104599Y-59031263D01* +X209104599Y-59031265D01* +X209066150Y-59224556D01* +X209066150Y-59421643D01* +X209087261Y-59527771D01* +X209098797Y-59585769D01* +X209104599Y-59614934D01* +X209104599Y-59614936D01* +X209180017Y-59797013D01* +X209180018Y-59797014D01* +X209289511Y-59960882D01* +X209428868Y-60100239D01* +X209592736Y-60209732D01* +X209774815Y-60285151D01* +X209968109Y-60323600D01* +X209968110Y-60323600D01* +X210415190Y-60323600D01* +X210415191Y-60323600D01* +X210608485Y-60285151D01* +X210790564Y-60209732D01* +X210954432Y-60100239D01* +X211093789Y-59960882D01* +X211203282Y-59797014D01* +X211278701Y-59614935D01* +X211317150Y-59421641D01* +X211317150Y-59224559D01* +X211278701Y-59031265D01* +X211203282Y-58849186D01* +X211093789Y-58685318D01* +X210954432Y-58545961D01* +X210790564Y-58436468D01* +X210790565Y-58436468D01* +X210790563Y-58436467D01* +X210608486Y-58361049D01* +X210543915Y-58348205D01* +X210490531Y-58318308D01* +X210464916Y-58262742D01* +X210476853Y-58202733D01* +X210521783Y-58161200D01* +X210547743Y-58153326D01* +X210632771Y-58139859D01* +X210834865Y-58074195D01* +X211024202Y-57977724D01* +X211196114Y-57852822D01* +X211346372Y-57702564D01* +X211471274Y-57530652D01* +X211567745Y-57341315D01* +X211633408Y-57139222D01* +X211643881Y-57073100D01* +X210595796Y-57073100D01* +X210634280Y-57006443D01* +X210666650Y-56885635D01* +X210666650Y-56760565D01* +X210634280Y-56639757D01* +X210595796Y-56573100D01* +X211643881Y-56573100D01* +X211643881Y-56573099D01* +X211633408Y-56506977D01* +X211567745Y-56304884D01* +X211471274Y-56115547D01* +X211346372Y-55943635D01* +X211196114Y-55793377D01* +X211024202Y-55668475D01* +X210834865Y-55572004D01* +X210632772Y-55506341D01* +X210547742Y-55492873D01* +X210493226Y-55465095D01* +X210465449Y-55410578D01* +X210475021Y-55350146D01* +X210518286Y-55306882D01* +X210543913Y-55297995D01* +X210608485Y-55285151D01* +X210790564Y-55209732D01* +X210954432Y-55100239D01* +X211093789Y-54960882D01* +X211203282Y-54797014D01* +X211278701Y-54614935D01* +X211317150Y-54421641D01* +X211317150Y-54224559D01* +X211278701Y-54031265D01* +X211203282Y-53849186D01* +X211093789Y-53685318D01* +X210954432Y-53545961D01* +X210790564Y-53436468D01* +X210790565Y-53436468D01* +X210790563Y-53436467D01* +X210608485Y-53361049D01* +X210415193Y-53322600D01* +X210415191Y-53322600D01* +X209968109Y-53322600D01* +X209968106Y-53322600D01* +X209774815Y-53361049D01* +X209774813Y-53361049D01* +X209592736Y-53436467D01* +X209428868Y-53545961D01* +X209428864Y-53545964D01* +X209289514Y-53685314D01* +X209289511Y-53685318D01* +X209180017Y-53849186D01* +X209104599Y-54031263D01* +X209104599Y-54031265D01* +X209066150Y-54224556D01* +X209066150Y-54421643D01* +X209083594Y-54509336D01* +X209103469Y-54609256D01* +X209104599Y-54614934D01* +X209104599Y-54614936D01* +X209180017Y-54797013D01* +X209191251Y-54813826D01* +X209289511Y-54960882D01* +X209428868Y-55100239D01* +X209592736Y-55209732D01* +X209774815Y-55285151D01* +X209839384Y-55297994D01* +X209892767Y-55327891D01* +X209918383Y-55383456D01* +X209906446Y-55443465D01* +X209861517Y-55484998D01* +X209835557Y-55492873D01* +X209750527Y-55506341D01* +X209548434Y-55572004D01* +X209359097Y-55668475D01* +X209187185Y-55793377D01* +X209036927Y-55943635D01* +X208912025Y-56115547D01* +X208815554Y-56304884D01* +X208749891Y-56506977D01* +X208739418Y-56573099D01* +X195272219Y-56573099D01* +X195348146Y-56468594D01* +X195430361Y-56307239D01* +X195486321Y-56135009D01* +X195503020Y-56029575D01* +X195514650Y-55956149D01* +X195514650Y-55775050D01* +X195490059Y-55619790D01* +X195486321Y-55596191D01* +X195430361Y-55423961D01* +X195348146Y-55262606D01* +X195241703Y-55116099D01* +X195113651Y-54988047D01* +X194967144Y-54881604D01* +X194967143Y-54881603D01* +X194967141Y-54881602D01* +X194805787Y-54799388D01* +X194633556Y-54743428D01* +X194454699Y-54715100D01* +X194454696Y-54715100D01* +X194273604Y-54715100D01* +X194273601Y-54715100D01* +X194094743Y-54743428D01* +X193922512Y-54799388D01* +X193761158Y-54881602D01* +X193700710Y-54925520D01* +X193614649Y-54988047D01* +X193486597Y-55116099D01* +X193445362Y-55172854D01* +X193380152Y-55262608D01* +X193297938Y-55423962D01* +X193241978Y-55596193D01* +X193213650Y-55775050D01* +X190434650Y-55775050D01* +X190434650Y-54850780D01* +X190434649Y-54850772D01* +X190425917Y-54806879D01* +X190425915Y-54806875D01* +X190392655Y-54757098D01* +X190392654Y-54757096D01* +X190372198Y-54743428D01* +X190342874Y-54723834D01* +X190342870Y-54723832D01* +X190298977Y-54715100D01* +X190298970Y-54715100D01* +X188269330Y-54715100D01* +X188269322Y-54715100D01* +X188225429Y-54723832D01* +X188225425Y-54723834D01* +X188175648Y-54757094D01* +X188175644Y-54757098D01* +X188142384Y-54806875D01* +X188142382Y-54806879D01* +X188133650Y-54850772D01* +X188133650Y-56867500D01* +X188114743Y-56925691D01* +X188065243Y-56961655D01* +X188034650Y-56966500D01* +X169559055Y-56966500D01* +X169430742Y-56992024D01* +X169385084Y-57001106D01* +X169385082Y-57001106D01* +X169221205Y-57068985D01* +X169221204Y-57068985D01* +X169073715Y-57167535D01* +X167492183Y-58749067D01* +X167393637Y-58896553D01* +X167325756Y-59060430D01* +X167325754Y-59060436D01* +X167291150Y-59234405D01* +X167291150Y-59411794D01* +X167325754Y-59585763D01* +X167325756Y-59585769D01* +X167393637Y-59749646D01* +X167492183Y-59897132D01* +X167492186Y-59897136D01* +X167617614Y-60022564D01* +X167765103Y-60121112D01* +X167928984Y-60188995D01* +X168102958Y-60223600D01* +X168102959Y-60223600D01* +X168280341Y-60223600D01* +X168280342Y-60223600D01* +X168454316Y-60188995D01* +X168618197Y-60121112D01* +X168765686Y-60022564D01* +X169991753Y-58796495D01* +X170046270Y-58768719D01* +X170061757Y-58767500D01* +X172755090Y-58767500D01* +X172761905Y-58769714D01* +X172768964Y-58768477D01* +X172790488Y-58779001D01* +X172813281Y-58786407D01* +X172817493Y-58792205D01* +X172823931Y-58795353D01* +X172835158Y-58816519D01* +X172849245Y-58835907D01* +X172849245Y-58843073D01* +X172852603Y-58849404D01* +X172849245Y-58873128D01* +X172849245Y-58897093D01* +X172844028Y-58909986D01* +X172836179Y-58926039D01* +X172817245Y-58952557D01* +X170689600Y-61080204D01* +X170635083Y-61107981D01* +X170619596Y-61109200D01* +X163402380Y-61109200D01* +X163344568Y-61120700D01* +X163280944Y-61133355D01* +X163276713Y-61134197D01* +X163276704Y-61134199D01* +X163158325Y-61183233D01* +X163051784Y-61254420D01* +X162359300Y-61946904D01* +X162352182Y-61950530D01* +X162347487Y-61956993D01* +X162325438Y-61964156D01* +X162304783Y-61974681D01* +X162289296Y-61975900D01* +X162100261Y-61975900D01* +X162042070Y-61956993D01* +X162006106Y-61907493D01* +X162006106Y-61846307D01* +X162014525Y-61827399D01* +X162015613Y-61825514D01* +X162062049Y-61745086D01* +X162092750Y-61630509D01* +X162092750Y-61515968D01* +X162111657Y-61457777D01* +X162121746Y-61445964D01* +X162665619Y-60902091D01* +X163254014Y-60313697D01* +X163292150Y-60221628D01* +X163292150Y-60121973D01* +X163292150Y-60025352D01* +X163311057Y-59967161D01* +X163347670Y-59936411D01* +X163369960Y-59925514D01* +X163448133Y-59887298D01* +X163530848Y-59804583D01* +X163582223Y-59699493D01* +X163592150Y-59631360D01* +X163592150Y-59014840D01* +X163582223Y-58946707D01* +X163579372Y-58940876D01* +X163566273Y-58914080D01* +X163557702Y-58853498D01* +X163586377Y-58799449D01* +X163641346Y-58772576D01* +X163655214Y-58771600D01* +X164078086Y-58771600D01* +X164136277Y-58790507D01* +X164172241Y-58840007D01* +X164172241Y-58901193D01* +X164167027Y-58914080D01* +X164151077Y-58946704D01* +X164148817Y-58962219D01* +X164141150Y-59014840D01* +X164141150Y-59631360D01* +X164144307Y-59653027D01* +X164151077Y-59699495D01* +X164198745Y-59797001D01* +X164202452Y-59804583D01* +X164223606Y-59825737D01* +X164251382Y-59880252D01* +X164241811Y-59940684D01* +X164223605Y-59965742D01* +X164140861Y-60048486D01* +X164140857Y-60048491D01* +X164081552Y-60151209D01* +X164068345Y-60200500D01* +X164050850Y-60265791D01* +X164050850Y-60384409D01* +X164070328Y-60457100D01* +X164081552Y-60498990D01* +X164140857Y-60601708D01* +X164140859Y-60601710D01* +X164140861Y-60601713D01* +X164224737Y-60685589D01* +X164224739Y-60685590D01* +X164224741Y-60685592D01* +X164327460Y-60744897D01* +X164327461Y-60744897D01* +X164327464Y-60744899D01* +X164442041Y-60775600D01* +X164442043Y-60775600D01* +X164560657Y-60775600D01* +X164560659Y-60775600D01* +X164675236Y-60744899D01* +X164675238Y-60744897D01* +X164675240Y-60744897D01* +X164777958Y-60685592D01* +X164777958Y-60685591D01* +X164777963Y-60685589D01* +X164861839Y-60601713D01* +X164865686Y-60595050D01* +X164921147Y-60498990D01* +X164921147Y-60498988D01* +X164921149Y-60498986D01* +X164951850Y-60384409D01* +X164951850Y-60265791D01* +X164942990Y-60232726D01* +X164939627Y-60205728D01* +X164939843Y-60190196D01* +X164942150Y-60184628D01* +X164942150Y-60024689D01* +X164942160Y-60023972D01* +X164951798Y-59995656D01* +X164961057Y-59967161D01* +X164961674Y-59966642D01* +X164961876Y-59966051D01* +X164965017Y-59963834D01* +X164997670Y-59936411D01* +X165019960Y-59925514D01* +X165098133Y-59887298D01* +X165180848Y-59804583D01* +X165232223Y-59699493D01* +X165242150Y-59631360D01* +X165242150Y-59014840D01* +X165232223Y-58946707D01* +X165229372Y-58940876D01* +X165216273Y-58914080D01* +X165207702Y-58853498D01* +X165236377Y-58799449D01* +X165291346Y-58772576D01* +X165305214Y-58771600D01* +X165594881Y-58771600D01* +X165653072Y-58790507D01* +X165664885Y-58800596D01* +X165962154Y-59097865D01* +X165989931Y-59152382D01* +X165991150Y-59167869D01* +X165991150Y-59631360D01* +X165994307Y-59653027D01* +X166001077Y-59699495D01* +X166048745Y-59797001D01* +X166052452Y-59804583D01* +X166135167Y-59887298D01* +X166168704Y-59903693D01* +X166240254Y-59938672D01* +X166240255Y-59938672D01* +X166240257Y-59938673D01* +X166308390Y-59948600D01* +X166308393Y-59948600D01* +X166774907Y-59948600D01* +X166774910Y-59948600D01* +X166843043Y-59938673D01* +X166948133Y-59887298D01* +X167030848Y-59804583D01* +X167082223Y-59699493D01* +X167092150Y-59631360D01* +X167092150Y-59014840D01* +X167082223Y-58946707D01* +X167079372Y-58940876D01* +X167048241Y-58877196D01* +X167030848Y-58841617D01* +X166948133Y-58758902D01* +X166928009Y-58749064D01* +X166843045Y-58707527D01* +X166808053Y-58702429D01* +X166774910Y-58697600D01* +X166311419Y-58697600D01* +X166253228Y-58678693D01* +X166241416Y-58668604D01* +X165881546Y-58308735D01* +X165789479Y-58270600D01* +X165789478Y-58270600D01* +X162140382Y-58270600D01* +X162135267Y-58268938D01* +X162130005Y-58270055D01* +X162106580Y-58259617D01* +X162082191Y-58251693D01* +X162079029Y-58247341D01* +X162074116Y-58245152D01* +X162061300Y-58222939D01* +X162046227Y-58202193D01* +X162046227Y-58196813D01* +X162043539Y-58192155D01* +X162046227Y-58166654D01* +X162046227Y-58141007D01* +X162049389Y-58136654D01* +X162049953Y-58131307D01* +X162061310Y-58120245D01* +X162082191Y-58091507D01* +X162090907Y-58085849D01* +X162096514Y-58082613D01* +X162117877Y-58073765D01* +X162153287Y-58050105D01* +X162224419Y-58002577D01* +X165194927Y-55032069D01* +X165266116Y-54925526D01* +X165284309Y-54881602D01* +X165297076Y-54850781D01* +X165297076Y-54850780D01* +X165297079Y-54850772D01* +X165315151Y-54807144D01* +X165340150Y-54681469D01* +X165340150Y-54404054D01* +X165359057Y-54345863D01* +X165369146Y-54334051D01* +X165504684Y-54198512D01* +X165559201Y-54170734D01* +X165619633Y-54180305D01* +X165662897Y-54223570D01* +X165672469Y-54284002D01* +X165665253Y-54308503D01* +X165619064Y-54413111D01* +X165616150Y-54438230D01* +X165616150Y-54827960D01* +X165616151Y-54827963D01* +X165619064Y-54853090D01* +X165644406Y-54910485D01* +X165664444Y-54955865D01* +X165743885Y-55035306D01* +X165846659Y-55080685D01* +X165871785Y-55083600D01* +X166256719Y-55083599D01* +X166314909Y-55102506D01* +X166350873Y-55152006D01* +X166350873Y-55213191D01* +X166342455Y-55232098D01* +X166321952Y-55267610D01* +X166321951Y-55267614D01* +X166291250Y-55382191D01* +X166291250Y-55500809D01* +X166305059Y-55552343D01* +X166321952Y-55615390D01* +X166381257Y-55718108D01* +X166381259Y-55718110D01* +X166381261Y-55718113D01* +X166465137Y-55801989D01* +X166465139Y-55801990D01* +X166465141Y-55801992D01* +X166567860Y-55861297D01* +X166567861Y-55861297D01* +X166567864Y-55861299D01* +X166682441Y-55892000D01* +X166682443Y-55892000D01* +X166801057Y-55892000D01* +X166801059Y-55892000D01* +X166915636Y-55861299D01* +X166915638Y-55861297D01* +X166915640Y-55861297D01* +X167018358Y-55801992D01* +X167018358Y-55801991D01* +X167018363Y-55801989D01* +X167102239Y-55718113D01* +X167119867Y-55687581D01* +X167161547Y-55615390D01* +X167161547Y-55615388D01* +X167161549Y-55615386D01* +X167192250Y-55500809D01* +X167192250Y-55382191D01* +X167161549Y-55267614D01* +X167161547Y-55267610D01* +X167161547Y-55267609D01* +X167141045Y-55232099D01* +X167128323Y-55172251D01* +X167153209Y-55116355D01* +X167206197Y-55085762D01* +X167226781Y-55083599D01* +X167611511Y-55083599D01* +X167611514Y-55083599D01* +X167636641Y-55080685D01* +X167739415Y-55035306D01* +X167818856Y-54955865D01* +X167864235Y-54853091D01* +X167867150Y-54827965D01* +X167867149Y-54438236D01* +X167864235Y-54413109D01* +X167818856Y-54310335D01* +X167739415Y-54230894D01* +X167636641Y-54185515D01* +X167636640Y-54185514D01* +X167636638Y-54185514D01* +X167611519Y-54182600D01* +X166790774Y-54182600D01* +X166732583Y-54163693D01* +X166696619Y-54114193D01* +X166696619Y-54053007D01* +X166732583Y-54003507D01* +X166741257Y-53997874D01* +X166749371Y-53993190D01* +X166833340Y-53909221D01* +X166833340Y-53909220D01* +X166899965Y-53842595D01* +X166954482Y-53814818D01* +X166969969Y-53813599D01* +X167611511Y-53813599D01* +X167611514Y-53813599D01* +X167636641Y-53810685D01* +X167739415Y-53765306D01* +X167818856Y-53685865D01* +X167864235Y-53583091D01* +X167867150Y-53557965D01* +X167867149Y-53168236D01* +X167864235Y-53143109D01* +X167818856Y-53040335D01* +X167739415Y-52960894D01* +X167636641Y-52915515D01* +X167636640Y-52915514D01* +X167636638Y-52915514D01* +X167611519Y-52912600D01* +X167611515Y-52912600D01* +X166802892Y-52912600D01* +X166801025Y-52912100D01* +X166682275Y-52912100D01* +X166680406Y-52912600D01* +X165871789Y-52912600D01* +X165871786Y-52912601D01* +X165846659Y-52915514D01* +X165743885Y-52960894D01* +X165664443Y-53040336D01* +X165659967Y-53050474D01* +X165619166Y-53096069D01* +X165559357Y-53108974D01* +X165514403Y-53092801D01* +X165459079Y-53055835D01* +X165340697Y-53006800D01* +X165340695Y-53006799D01* +X165340694Y-53006799D01* +X165215019Y-52981800D01* +X165127618Y-52981800D01* +X165069427Y-52962893D01* +X165033463Y-52913393D01* +X165033463Y-52852207D01* +X165057615Y-52812796D01* +X165497816Y-52372596D01* +X165504932Y-52368970D01* +X165509628Y-52362507D01* +X165531677Y-52355342D01* +X165552332Y-52344819D01* +X165567819Y-52343600D01* +X165568028Y-52343600D01* +X165626219Y-52362507D01* +X165658592Y-52402612D01* +X165664444Y-52415865D01* +X165743885Y-52495306D01* +X165846659Y-52540685D01* +X165871785Y-52543600D01* +X167611514Y-52543599D01* +X167636641Y-52540685D01* +X167739415Y-52495306D01* +X167818856Y-52415865D01* +X167864235Y-52313091D01* +X167867150Y-52287965D01* +X167867149Y-51898236D01* +X167864235Y-51873109D01* +X167818856Y-51770335D01* +X167787182Y-51738661D01* +X167759407Y-51684147D01* +X167768978Y-51623715D01* +X167812243Y-51580450D01* +X167821163Y-51576919D01* +X167821135Y-51576854D01* +X167826851Y-51574380D01* +X167968202Y-51490785D01* +X168084335Y-51374652D01* +X168167930Y-51233301D01* +X168167930Y-51233300D01* +X168213748Y-51075593D01* +X168213750Y-51075586D01* +X168213946Y-51073100D01* +X165269354Y-51073100D01* +X165269549Y-51075586D01* +X165269551Y-51075593D01* +X165315369Y-51233300D01* +X165315369Y-51233301D01* +X165398964Y-51374652D01* +X165515097Y-51490785D01* +X165656448Y-51574380D01* +X165658991Y-51575480D01* +X165659610Y-51575500D01* +X165660335Y-51576062D01* +X165662165Y-51576854D01* +X165661962Y-51577322D01* +X165681465Y-51592439D01* +X165704334Y-51607980D01* +X165705424Y-51611009D01* +X165707970Y-51612982D01* +X165715694Y-51639530D01* +X165725062Y-51665547D01* +X165724163Y-51668639D01* +X165725063Y-51671731D01* +X165719589Y-51684387D01* +X165707994Y-51724304D01* +X165704360Y-51729308D01* +X165700531Y-51734247D01* +X165664444Y-51770335D01* +X165653697Y-51794674D01* +X165646277Y-51804248D01* +X165630508Y-51814973D01* +X165617793Y-51829183D01* +X165604245Y-51832835D01* +X165595685Y-51838658D01* +X165583994Y-51838295D01* +X165568028Y-51842600D01* +X165373221Y-51842600D01* +X165281155Y-51880734D01* +X162210684Y-54951204D01* +X162156167Y-54978981D01* +X162140680Y-54980200D01* +X161385951Y-54980200D01* +X161385950Y-54980201D01* +X161385950Y-55630198D01* +X161388816Y-55633064D01* +X161416593Y-55687581D01* +X161407022Y-55748013D01* +X161388818Y-55773069D01* +X161361188Y-55800701D01* +X161306673Y-55828481D01* +X161291182Y-55829700D01* +X160827690Y-55829700D01* +X160793623Y-55834663D01* +X160759554Y-55839627D01* +X160735030Y-55851617D01* +X160727938Y-55852620D01* +X160722143Y-55856831D01* +X160698176Y-55856831D01* +X160674448Y-55860188D01* +X160668121Y-55856831D01* +X160660957Y-55856831D01* +X160641566Y-55842742D01* +X160620398Y-55831512D01* +X160617252Y-55825077D01* +X160611457Y-55820867D01* +X160604051Y-55798073D01* +X160593526Y-55776544D01* +X160592550Y-55762676D01* +X160592550Y-55714306D01* +X160611457Y-55656115D01* +X160660957Y-55620151D01* +X160721007Y-55619790D01* +X160733843Y-55623790D01* +X160733845Y-55623791D01* +X160804374Y-55630199D01* +X160885949Y-55630198D01* +X160885950Y-55630198D01* +X160885950Y-53830201D01* +X161385950Y-53830201D01* +X161385950Y-54480199D01* +X161385951Y-54480200D01* +X162110948Y-54480200D01* +X162110949Y-54480199D01* +X162110949Y-54473633D01* +X162110948Y-54473617D01* +X162104541Y-54403096D01* +X162104539Y-54403090D01* +X162053970Y-54240807D01* +X162053967Y-54240799D01* +X161966025Y-54095327D01* +X161845822Y-53975124D01* +X161700350Y-53887182D01* +X161700342Y-53887179D01* +X161538060Y-53836610D01* +X161538054Y-53836608D01* +X161467531Y-53830200D01* +X161385951Y-53830200D01* +X161385950Y-53830201D01* +X160885950Y-53830201D01* +X160885948Y-53830199D01* +X160804384Y-53830200D01* +X160804367Y-53830201D01* +X160733846Y-53836608D01* +X160733842Y-53836609D01* +X160721001Y-53840611D01* +X160659820Y-53839870D01* +X160610759Y-53803310D01* +X160592550Y-53746093D01* +X160592550Y-53008153D01* +X160611457Y-52949962D01* +X160621540Y-52938155D01* +X161693637Y-51866057D01* +X161743121Y-51840844D01* +X161742933Y-51840234D01* +X161746458Y-51839144D01* +X161748152Y-51838282D01* +X161749220Y-51838119D01* +X161750275Y-51837966D01* +X161862861Y-51782926D01* +X161912876Y-51732910D01* +X161967390Y-51705134D01* +X162027822Y-51714705D01* +X162071087Y-51757969D01* +X162076853Y-51771775D01* +X162080104Y-51781587D01* +X162169075Y-51925829D01* +X162288920Y-52045674D01* +X162433162Y-52134645D01* +X162594046Y-52187956D01* +X162693326Y-52198099D01* +X162716650Y-52198098D01* +X162716650Y-51473101D01* +X163216650Y-51473101D01* +X163216650Y-52198098D01* +X163216651Y-52198099D01* +X163239972Y-52198099D01* +X163339247Y-52187957D01* +X163339259Y-52187954D01* +X163500137Y-52134645D01* +X163644379Y-52045674D01* +X163764224Y-51925829D01* +X163853195Y-51781587D01* +X163906506Y-51620703D01* +X163916650Y-51521423D01* +X163916650Y-51473101D01* +X163916649Y-51473100D01* +X163216651Y-51473100D01* +X163216650Y-51473101D01* +X162716650Y-51473101D01* +X162716650Y-50248101D01* +X163216650Y-50248101D01* +X163216650Y-50973099D01* +X163216651Y-50973100D01* +X163916648Y-50973100D01* +X163916649Y-50973099D01* +X163916649Y-50924777D01* +X163906507Y-50825502D01* +X163906504Y-50825490D01* +X163853195Y-50664614D01* +X163850643Y-50660475D01* +X163850642Y-50660472D01* +X163796749Y-50573100D01* +X165269354Y-50573100D01* +X166491649Y-50573100D01* +X166491650Y-50573099D01* +X166491650Y-50023101D01* +X166991650Y-50023101D01* +X166991650Y-50573099D01* +X166991651Y-50573100D01* +X168213945Y-50573100D01* +X168213750Y-50570613D01* +X168213748Y-50570606D01* +X168167930Y-50412899D01* +X168167930Y-50412898D01* +X168084335Y-50271547D01* +X167968202Y-50155414D01* +X167826850Y-50071819D01* +X167669139Y-50025999D01* +X167632287Y-50023100D01* +X166991651Y-50023100D01* +X166991650Y-50023101D01* +X166491650Y-50023101D01* +X166491649Y-50023100D01* +X165851013Y-50023100D01* +X165814160Y-50025999D01* +X165656449Y-50071819D01* +X165656448Y-50071819D01* +X165515097Y-50155414D01* +X165398964Y-50271547D01* +X165315369Y-50412898D01* +X165315369Y-50412899D01* +X165269551Y-50570606D01* +X165269549Y-50570613D01* +X165269354Y-50573100D01* +X163796749Y-50573100D01* +X163764224Y-50520370D01* +X163644379Y-50400525D01* +X163500137Y-50311554D01* +X163339253Y-50258243D01* +X163239973Y-50248100D01* +X163216651Y-50248100D01* +X163216650Y-50248101D01* +X162716650Y-50248101D01* +X162716650Y-50248100D01* +X162716649Y-50248099D01* +X162693339Y-50248100D01* +X162693334Y-50248101D01* +X162594051Y-50258242D01* +X162594040Y-50258245D01* +X162433162Y-50311554D01* +X162288920Y-50400525D01* +X162288919Y-50400526D01* +X162236154Y-50453292D01* +X162181637Y-50481069D01* +X162121205Y-50471498D01* +X162077940Y-50428233D01* +X162067150Y-50383288D01* +X162067150Y-47597599D01* +X162086057Y-47539408D01* +X162135557Y-47503444D01* +X162166150Y-47498599D01* +X162823171Y-47498599D01* +X162823172Y-47498598D01* +X162870061Y-47491172D01* +X162916949Y-47483747D01* +X162916949Y-47483746D01* +X162916954Y-47483746D01* +X163029992Y-47426150D01* +X163119700Y-47336442D01* +X163177296Y-47223404D01* +X163192150Y-47129619D01* +X163192149Y-46416582D01* +X163192148Y-46416578D01* +X163192148Y-46416576D01* +X163177297Y-46322800D01* +X163177296Y-46322798D01* +X163177296Y-46322796D01* +X163119700Y-46209758D01* +X163029992Y-46120050D01* +X162916954Y-46062454D01* +X162916955Y-46062454D01* +X162823171Y-46047600D01* +X160560128Y-46047600D01* +X160560126Y-46047601D01* +X160466350Y-46062452D01* +X160466345Y-46062454D01* +X160353309Y-46120049D01* +X160263599Y-46209759D01* +X160206004Y-46322795D01* +X160191150Y-46416578D01* +X160191150Y-47129620D01* +X160191151Y-47129623D01* +X160206002Y-47223399D01* +X160206004Y-47223404D01* +X160263600Y-47336442D01* +X160353308Y-47426150D01* +X160466346Y-47483746D01* +X160560131Y-47498600D01* +X160667150Y-47498599D01* +X160725340Y-47517506D01* +X160761304Y-47567005D01* +X160766150Y-47597599D01* +X160766150Y-50912646D01* +X160747243Y-50970837D01* +X160737154Y-50982650D01* +X159436770Y-52283034D01* +X159396303Y-52343600D01* +X159365584Y-52389573D01* +X159316550Y-52507952D01* +X159316549Y-52507955D01* +X159316549Y-52507956D01* +X159314472Y-52518399D01* +X159291550Y-52633630D01* +X159291550Y-57186846D01* +X159272643Y-57245037D01* +X159262554Y-57256850D01* +X158773570Y-57745834D01* +X158705301Y-57848009D01* +X158702385Y-57852371D01* +X158653350Y-57970752D01* +X158653349Y-57970757D01* +X158628350Y-58096430D01* +X158628350Y-62017771D01* +X158648909Y-62121125D01* +X158648908Y-62121125D01* +X158653347Y-62143438D01* +X158653348Y-62143442D01* +X158702384Y-62261826D01* +X158757966Y-62345011D01* +X158774650Y-62400012D01* +X158774650Y-62714395D01* +X158755743Y-62772586D01* +X158745654Y-62784399D01* +X157619504Y-63910549D01* +X157564987Y-63938326D01* +X157504555Y-63928755D01* +X157461290Y-63885490D01* +X157450500Y-63840545D01* +X157450500Y-63010453D01* +X157469407Y-62952262D01* +X157479490Y-62940455D01* +X157550426Y-62869520D01* +X157621615Y-62762977D01* +X157670651Y-62644594D01* +X157672373Y-62635934D01* +X157672375Y-62635931D01* +X157672374Y-62635931D01* +X157695650Y-62518919D01* +X157695650Y-53512531D01* +X157670651Y-53386856D01* +X157644035Y-53322600D01* +X157621616Y-53268474D01* +X157618460Y-53263751D01* +X157550429Y-53161934D01* +X157550427Y-53161931D01* +X155671145Y-51282649D01* +X155643368Y-51228132D01* +X155642149Y-51212645D01* +X155642149Y-49691578D01* +X155642148Y-49691576D01* +X155627297Y-49597800D01* +X155627296Y-49597798D01* +X155627296Y-49597796D01* +X155569700Y-49484758D01* +X155479992Y-49395050D01* +X155366954Y-49337454D01* +X155366955Y-49337454D01* +X155273171Y-49322600D01* +X154110128Y-49322600D01* +X154110126Y-49322601D01* +X154016350Y-49337452D01* +X154016345Y-49337454D01* +X153903309Y-49395049D01* +X153813599Y-49484759D01* +X153756004Y-49597795D01* +X153741150Y-49691578D01* +X153741150Y-52754621D01* +X153741151Y-52754623D01* +X153756002Y-52848399D01* +X153756004Y-52848404D01* +X153813600Y-52961442D01* +X153903308Y-53051150D01* +X154016346Y-53108746D01* +X154110131Y-53123600D01* +X155273168Y-53123599D01* +X155273171Y-53123599D01* +X155273172Y-53123598D01* +X155341912Y-53112712D01* +X155366949Y-53108747D01* +X155366949Y-53108746D01* +X155366954Y-53108746D01* +X155479992Y-53051150D01* +X155480001Y-53051140D01* +X155480944Y-53050457D01* +X155482069Y-53050091D01* +X155486933Y-53047613D01* +X155487325Y-53048382D01* +X155539133Y-53031545D01* +X155597326Y-53050448D01* +X155609145Y-53060541D01* +X156365654Y-53817050D01* +X156393431Y-53871567D01* +X156394650Y-53887054D01* +X156394650Y-55612171D01* +X156375743Y-55670362D01* +X156326243Y-55706326D01* +X156265057Y-55706326D01* +X156225647Y-55682175D01* +X156089432Y-55545961D01* +X156085119Y-55543079D01* +X156070119Y-55530769D01* +X154356400Y-53817050D01* +X152642086Y-52102736D01* +X152635894Y-52098599D01* +X152553091Y-52043272D01* +X152553091Y-52043271D01* +X152542090Y-52035921D01* +X152538411Y-52033463D01* +X152500531Y-51985415D01* +X152498127Y-51924277D01* +X152523406Y-51881145D01* +X152577439Y-51827113D01* +X152577442Y-51827108D01* +X152636747Y-51724390D01* +X152636747Y-51724388D01* +X152636749Y-51724386D01* +X152667450Y-51609809D01* +X152667450Y-51491191D01* +X152636749Y-51376614D01* +X152636747Y-51376611D01* +X152636747Y-51376609D01* +X152577442Y-51273891D01* +X152577438Y-51273886D01* +X152496446Y-51192893D01* +X152468669Y-51138376D01* +X152467450Y-51122890D01* +X152467450Y-49161071D01* +X152429315Y-49069005D01* +X152429314Y-49069004D01* +X152429314Y-49069003D01* +X152358847Y-48998536D01* +X152358845Y-48998535D01* +X151215203Y-47854893D01* +X150071145Y-46710834D01* +X150043368Y-46656317D01* +X150042149Y-46640830D01* +X150042149Y-46073101D01* +X153391651Y-46073101D01* +X153391651Y-47373086D01* +X153402142Y-47475787D01* +X153402145Y-47475799D01* +X153457293Y-47642224D01* +X153549330Y-47791440D01* +X153673309Y-47915419D01* +X153822525Y-48007456D01* +X153988956Y-48062606D01* +X154091663Y-48073099D01* +X154441648Y-48073099D01* +X154441650Y-48073098D01* +X154441650Y-46073101D01* +X154941650Y-46073101D01* +X154941650Y-48073098D01* +X154941651Y-48073099D01* +X155291636Y-48073099D01* +X155394337Y-48062607D01* +X155394349Y-48062604D01* +X155560774Y-48007456D01* +X155709990Y-47915419D01* +X155833969Y-47791440D01* +X155926006Y-47642224D01* +X155981156Y-47475793D01* +X155991650Y-47373087D01* +X155991650Y-46073101D01* +X155991649Y-46073100D01* +X154941651Y-46073100D01* +X154941650Y-46073101D01* +X154441650Y-46073101D01* +X154441649Y-46073100D01* +X153391652Y-46073100D01* +X153391651Y-46073101D01* +X150042149Y-46073101D01* +X150042149Y-44841578D01* +X150042148Y-44841576D01* +X150027297Y-44747800D01* +X150027296Y-44747798D01* +X150027296Y-44747796D01* +X149969700Y-44634758D01* +X149879992Y-44545050D01* +X149766954Y-44487454D01* +X149766955Y-44487454D01* +X149673172Y-44472600D01* +X148985129Y-44472600D01* +X148985126Y-44472601D01* +X148891350Y-44487452D01* +X148891345Y-44487454D01* +X148778309Y-44545049D01* +X148688599Y-44634759D01* +X148631004Y-44747795D01* +X148616150Y-44841578D01* +X148616150Y-47804621D01* +X148616151Y-47804623D01* +X148631002Y-47898399D01* +X148631004Y-47898404D01* +X148688600Y-48011442D01* +X148778308Y-48101150D01* +X148891346Y-48158746D01* +X148985131Y-48173600D01* +X149673168Y-48173599D01* +X149673170Y-48173599D01* +X149673171Y-48173598D01* +X149720061Y-48166172D01* +X149766949Y-48158747D01* +X149766949Y-48158746D01* +X149766954Y-48158746D01* +X149879992Y-48101150D01* +X149969700Y-48011442D01* +X150027296Y-47898404D01* +X150042150Y-47804619D01* +X150042149Y-47629367D01* +X150061056Y-47571178D01* +X150110556Y-47535214D01* +X150171741Y-47535213D01* +X150211153Y-47559364D01* +X151937454Y-49285664D01* +X151965231Y-49340181D01* +X151966450Y-49355668D01* +X151966450Y-51122890D01* +X151947543Y-51181081D01* +X151937454Y-51192893D01* +X151856461Y-51273886D01* +X151856457Y-51273891D01* +X151797152Y-51376609D01* +X151782682Y-51430613D01* +X151771271Y-51473201D01* +X151766450Y-51491192D01* +X151766450Y-51522892D01* +X151747543Y-51581083D01* +X151698043Y-51617047D01* +X151636857Y-51617047D01* +X151597446Y-51592896D01* +X145796145Y-45791595D01* +X145768368Y-45737078D01* +X145767149Y-45721591D01* +X145767149Y-44841578D01* +X145767148Y-44841576D01* +X145752297Y-44747800D01* +X145752296Y-44747798D01* +X145752296Y-44747796D01* +X145694700Y-44634758D01* +X145604992Y-44545050D01* +X145491954Y-44487454D01* +X145491955Y-44487454D01* +X145398172Y-44472600D01* +X144710129Y-44472600D01* +X144710126Y-44472601D01* +X144616350Y-44487452D01* +X144616345Y-44487454D01* +X144503309Y-44545049D01* +X144413599Y-44634759D01* +X144356004Y-44747795D01* +X144341150Y-44841578D01* +X144341150Y-45323600D01* +X144322243Y-45381791D01* +X144272743Y-45417755D01* +X144242150Y-45422600D01* +X138997079Y-45422600D01* +X138938888Y-45403693D01* +X138933306Y-45398925D01* +X138933201Y-45399054D01* +X138929435Y-45395964D01* +X138929432Y-45395961D01* +X138802978Y-45311467D01* +X138765563Y-45286467D01* +X138583485Y-45211049D01* +X138390193Y-45172600D01* +X138390191Y-45172600D01* +X138193109Y-45172600D01* +X138193106Y-45172600D01* +X137999815Y-45211049D01* +X137999813Y-45211049D01* +X137817736Y-45286467D01* +X137653868Y-45395961D01* +X137653864Y-45395964D01* +X137514514Y-45535314D01* +X137514511Y-45535318D01* +X137405017Y-45699186D01* +X137329599Y-45881263D01* +X137329599Y-45881265D01* +X137291150Y-46074556D01* +X137291150Y-46571643D01* +X137309241Y-46662589D01* +X137327411Y-46753937D01* +X137329599Y-46764934D01* +X137329599Y-46764936D01* +X137405017Y-46947013D01* +X137431284Y-46986324D01* +X137514511Y-47110882D01* +X137653868Y-47250239D01* +X137817736Y-47359732D01* +X137999815Y-47435151D01* +X138193109Y-47473600D01* +X138193110Y-47473600D01* +X138390190Y-47473600D01* +X138390191Y-47473600D01* +X138583485Y-47435151D01* +X138765564Y-47359732D01* +X138929432Y-47250239D01* +X138929442Y-47250228D01* +X138933201Y-47247146D01* +X138934548Y-47248788D01* +X138981592Y-47224819D01* +X138997079Y-47223600D01* +X144242151Y-47223600D01* +X144300342Y-47242507D01* +X144336306Y-47292007D01* +X144341151Y-47322600D01* +X144341151Y-47804623D01* +X144356002Y-47898399D01* +X144356004Y-47898404D01* +X144413600Y-48011442D01* +X144503308Y-48101150D01* +X144616346Y-48158746D01* +X144710131Y-48173600D01* +X145398168Y-48173599D01* +X145398170Y-48173599D01* +X145398171Y-48173598D01* +X145445061Y-48166172D01* +X145491949Y-48158747D01* +X145491950Y-48158746D01* +X145491954Y-48158746D01* +X145510234Y-48149431D01* +X145570663Y-48139857D01* +X145625181Y-48167632D01* +X145625185Y-48167635D01* +X150959214Y-53501664D01* +X151018290Y-53541136D01* +X151106703Y-53600213D01* +X151188641Y-53634152D01* +X151188642Y-53634153D01* +X151233458Y-53652716D01* +X151270584Y-53668095D01* +X151444558Y-53702700D01* +X151444559Y-53702700D01* +X151654042Y-53702700D01* +X151712233Y-53721607D01* +X151724046Y-53731696D01* +X152806176Y-54813826D01* +X152833953Y-54868343D01* +X152824382Y-54928775D01* +X152781117Y-54972040D01* +X152751660Y-54981611D01* +X152595527Y-55006341D01* +X152393434Y-55072004D01* +X152204096Y-55168476D01* +X152204092Y-55168478D01* +X152149932Y-55207828D01* +X152782241Y-55840137D01* +X152718657Y-55857175D01* +X152604643Y-55923001D01* +X152511551Y-56016093D01* +X152445725Y-56130107D01* +X152428687Y-56193691D01* +X151796378Y-55561382D01* +X151757028Y-55615542D01* +X151757026Y-55615546D01* +X151660554Y-55804884D01* +X151594890Y-56006978D01* +X151563692Y-56203956D01* +X151535914Y-56258473D01* +X151481398Y-56286250D01* +X151420966Y-56276679D01* +X151377701Y-56233414D01* +X151368813Y-56207783D01* +X151368052Y-56203956D01* +X151333701Y-56031265D01* +X151258282Y-55849186D01* +X151148789Y-55685318D01* +X151009432Y-55545961D01* +X150882641Y-55461242D01* +X150845563Y-55436467D01* +X150663485Y-55361049D01* +X150470193Y-55322600D01* +X150470191Y-55322600D01* +X150273109Y-55322600D01* +X150273106Y-55322600D01* +X150079815Y-55361049D01* +X150079813Y-55361049D01* +X149897736Y-55436467D01* +X149733868Y-55545961D01* +X149733864Y-55545964D01* +X149594514Y-55685314D01* +X149594511Y-55685318D01* +X149485017Y-55849186D01* +X149409599Y-56031263D01* +X149409599Y-56031265D01* +X149371150Y-56224556D01* +X149371150Y-56421643D01* +X149409599Y-56614934D01* +X149409599Y-56614936D01* +X149485017Y-56797013D01* +X149485018Y-56797014D01* +X149594511Y-56960882D01* +X149733868Y-57100239D01* +X149897736Y-57209732D01* +X150079815Y-57285151D01* +X150273109Y-57323600D01* +X150273110Y-57323600D01* +X150470190Y-57323600D01* +X150470191Y-57323600D01* +X150663485Y-57285151D01* +X150845564Y-57209732D01* +X151009432Y-57100239D01* +X151148789Y-56960882D01* +X151258282Y-56797014D01* +X151333701Y-56614935D01* +X151368813Y-56438415D01* +X151398710Y-56385032D01* +X151454275Y-56359416D01* +X151514285Y-56371353D01* +X151555817Y-56416283D01* +X151563692Y-56442243D01* +X151594890Y-56639221D01* +X151660554Y-56841315D01* +X151757026Y-57030653D01* +X151757030Y-57030659D01* +X151796378Y-57084816D01* +X151796379Y-57084816D01* +X152428687Y-56452507D01* +X152445725Y-56516093D01* +X152511551Y-56630107D01* +X152604643Y-56723199D01* +X152718657Y-56789025D01* +X152782239Y-56806062D01* +X152149932Y-57438369D01* +X152149932Y-57438370D01* +X152204090Y-57477719D01* +X152204096Y-57477723D01* +X152393434Y-57574195D01* +X152595528Y-57639859D01* +X152805400Y-57673100D01* +X153017900Y-57673100D01* +X153227771Y-57639859D01* +X153429865Y-57574195D01* +X153619206Y-57477720D01* +X153673366Y-57438370D01* +X153041058Y-56806062D01* +X153104643Y-56789025D01* +X153218657Y-56723199D01* +X153311749Y-56630107D01* +X153377575Y-56516093D01* +X153394612Y-56452508D01* +X154026920Y-57084816D01* +X154066270Y-57030656D01* +X154162745Y-56841315D01* +X154228409Y-56639221D01* +X154253138Y-56483090D01* +X154260256Y-56469119D01* +X154262709Y-56453632D01* +X154273796Y-56442544D01* +X154280915Y-56428573D01* +X154294886Y-56421454D01* +X154305974Y-56410367D01* +X154321461Y-56407914D01* +X154335432Y-56400796D01* +X154350919Y-56403248D01* +X154366406Y-56400796D01* +X154380376Y-56407914D01* +X154395864Y-56410367D01* +X154420923Y-56428573D01* +X154439141Y-56446791D01* +X154466235Y-56497480D01* +X154489599Y-56614936D01* +X154565017Y-56797013D01* +X154565018Y-56797014D01* +X154674511Y-56960882D01* +X154813868Y-57100239D01* +X154977736Y-57209732D01* +X155159815Y-57285151D01* +X155353109Y-57323600D01* +X155353110Y-57323600D01* +X155550190Y-57323600D01* +X155550191Y-57323600D01* +X155743485Y-57285151D01* +X155925564Y-57209732D01* +X156089432Y-57100239D01* +X156225646Y-56964025D01* +X156280163Y-56936248D01* +X156340595Y-56945819D01* +X156383860Y-56989084D01* +X156394650Y-57034029D01* +X156394650Y-62144396D01* +X156393497Y-62147944D01* +X156394390Y-62151567D01* +X156387241Y-62167197D01* +X156375743Y-62202587D01* +X156371317Y-62208236D01* +X156368612Y-62211441D01* +X156294723Y-62285331D01* +X156253834Y-62346527D01* +X156250761Y-62351125D01* +X156250756Y-62351132D01* +X156223534Y-62391873D01* +X156174500Y-62510252D01* +X156174499Y-62510255D01* +X156174499Y-62510256D01* +X156168624Y-62539793D01* +X156149500Y-62635930D01* +X156149500Y-63150500D01* +X156130593Y-63208691D01* +X156081093Y-63244655D01* +X156050500Y-63249500D01* +X156035930Y-63249500D01* +X155973093Y-63261999D01* +X155910256Y-63274499D01* +X155910255Y-63274499D01* +X155910252Y-63274500D01* +X155791873Y-63323534D01* +X155685334Y-63394720D01* +X154459550Y-64620504D01* +X154405033Y-64648281D01* +X154389546Y-64649500D01* +X154026609Y-64649500D01* +X153968418Y-64630593D01* +X153932454Y-64581093D01* +X153932454Y-64519907D01* +X153956603Y-64480498D01* +X153960489Y-64476613D01* +X153962229Y-64473599D01* +X154019797Y-64373890D01* +X154019797Y-64373888D01* +X154019799Y-64373886D01* +X154050500Y-64259309D01* +X154050500Y-64140691D01* +X154019799Y-64026114D01* +X154019797Y-64026111D01* +X154019797Y-64026109D01* +X153960492Y-63923391D01* +X153960490Y-63923389D01* +X153960489Y-63923387D01* +X153876613Y-63839511D01* +X153876610Y-63839509D01* +X153876608Y-63839507D01* +X153822618Y-63808336D01* +X153781677Y-63762867D01* +X153775281Y-63702016D01* +X153805874Y-63649028D01* +X153861770Y-63624142D01* +X153872118Y-63623600D01* +X154322391Y-63623600D01* +X154380582Y-63642507D01* +X154392388Y-63652590D01* +X154473387Y-63733589D01* +X154473389Y-63733590D01* +X154473391Y-63733592D01* +X154576110Y-63792897D01* +X154576111Y-63792897D01* +X154576114Y-63792899D01* +X154690691Y-63823600D01* +X154690693Y-63823600D01* +X154809307Y-63823600D01* +X154809309Y-63823600D01* +X154923886Y-63792899D01* +X154923888Y-63792897D01* +X154923890Y-63792897D01* +X155026608Y-63733592D01* +X155026608Y-63733591D01* +X155026613Y-63733589D01* +X155110489Y-63649713D01* +X155110492Y-63649708D01* +X155169797Y-63546990D01* +X155169797Y-63546988D01* +X155169799Y-63546986D01* +X155200500Y-63432409D01* +X155200500Y-63313791D01* +X155169799Y-63199214D01* +X155169797Y-63199211D01* +X155169797Y-63199209D01* +X155110492Y-63096491D01* +X155110490Y-63096489D01* +X155110489Y-63096487D01* +X155026613Y-63012611D01* +X155026610Y-63012609D01* +X155026608Y-63012607D01* +X154923889Y-62953302D01* +X154923890Y-62953302D01* +X154889708Y-62944143D01* +X154809309Y-62922600D01* +X154690691Y-62922600D01* +X154624078Y-62940449D01* +X154576109Y-62953302D01* +X154473391Y-63012607D01* +X154473390Y-63012608D01* +X154473387Y-63012610D01* +X154473387Y-63012611D01* +X154392392Y-63093605D01* +X154337878Y-63121381D01* +X154322391Y-63122600D01* +X146880369Y-63122600D01* +X146822178Y-63103693D01* +X146810365Y-63093604D01* +X145340869Y-61624108D01* +X145313092Y-61569591D01* +X145322663Y-61509159D01* +X145340865Y-61484105D01* +X145352206Y-61472765D01* +X145397585Y-61369991D01* +X145400500Y-61344865D01* +X145400499Y-61041712D01* +X145419406Y-60983523D01* +X145468906Y-60947559D01* +X145530091Y-60947558D01* +X145538814Y-60950854D01* +X145539802Y-60951281D01* +X145697510Y-60997100D01* +X145734363Y-61000000D01* +X146137499Y-61000000D01* +X146137500Y-60999999D01* +X146137500Y-60450001D01* +X146637500Y-60450001D01* +X146637500Y-60999999D01* +X146637501Y-61000000D01* +X147040637Y-61000000D01* +X147077489Y-60997100D01* +X147235200Y-60951280D01* +X147235201Y-60951280D01* +X147376552Y-60867685D01* +X147492685Y-60751552D01* +X147576280Y-60610201D01* +X147576280Y-60610200D01* +X147622098Y-60452493D01* +X147622100Y-60452486D01* +X147622296Y-60450000D01* +X146637501Y-60450000D01* +X146637500Y-60450001D01* +X146137500Y-60450001D01* +X146137499Y-60450000D01* +X145152704Y-60450000D01* +X145152899Y-60452486D01* +X145152901Y-60452493D01* +X145187877Y-60572880D01* +X145185955Y-60634035D01* +X145148454Y-60682381D01* +X145092808Y-60699500D01* +X144457269Y-60699500D01* +X144399078Y-60680593D01* +X144387265Y-60670504D01* +X143922489Y-60205728D01* +X143454397Y-59737636D01* +X143454395Y-59737635D01* +X143454394Y-59737634D01* +X143362329Y-59699500D01* +X143362328Y-59699500D01* +X138648622Y-59699500D01* +X138590431Y-59680593D01* +X138558057Y-59640487D01* +X138554026Y-59631357D01* +X138552206Y-59627235D01* +X138472765Y-59547794D01* +X138369991Y-59502415D01* +X138369990Y-59502414D01* +X138369988Y-59502414D01* +X138344868Y-59499500D01* +X137080139Y-59499500D01* +X137080136Y-59499501D01* +X137055009Y-59502414D01* +X136952235Y-59547794D01* +X136872794Y-59627235D01* +X136827414Y-59730011D01* +X136824500Y-59755130D01* +X136824500Y-60144860D01* +X136824501Y-60144863D01* +X136827414Y-60169990D01* +X136851085Y-60223599D01* +X136872794Y-60272765D01* +X136952235Y-60352206D01* +X137055009Y-60397585D01* +X137080135Y-60400500D01* +X138344864Y-60400499D01* +X138369991Y-60397585D01* +X138472765Y-60352206D01* +X138552206Y-60272765D01* +X138558057Y-60259512D01* +X138598857Y-60213917D01* +X138648622Y-60200500D01* +X139137147Y-60200500D01* +X139162867Y-60208856D01* +X139189144Y-60215254D01* +X139191651Y-60218209D01* +X139195338Y-60219407D01* +X139211235Y-60241288D01* +X139228732Y-60261907D01* +X139229023Y-60265771D01* +X139231302Y-60268907D01* +X139231302Y-60295956D01* +X139233337Y-60322918D01* +X139231302Y-60325827D01* +X139231302Y-60330093D01* +X139201202Y-60374985D01* +X139196870Y-60378660D01* +X139172831Y-60394723D01* +X139144188Y-60423365D01* +X139141101Y-60425985D01* +X139116357Y-60436141D01* +X139092531Y-60448281D01* +X139085419Y-60448840D01* +X139084498Y-60449219D01* +X139083549Y-60448988D01* +X139077047Y-60449500D01* +X138955138Y-60449500D01* +X138955135Y-60449501D01* +X138930009Y-60452414D01* +X138827235Y-60497794D01* +X138747794Y-60577235D01* +X138702414Y-60680011D01* +X138699500Y-60705130D01* +X138699500Y-61094860D01* +X138699501Y-61094863D01* +X138702414Y-61119990D01* +X138723554Y-61167866D01* +X138747794Y-61222765D01* +X138827235Y-61302206D01* +X138930009Y-61347585D01* +X138955135Y-61350500D01* +X139077044Y-61350499D01* +X139135235Y-61369406D01* +X139147049Y-61379495D01* +X143548052Y-65780498D01* +X143575828Y-65835013D01* +X143566257Y-65895445D01* +X143522992Y-65938710D01* +X143478047Y-65949500D01* +X104586503Y-65949500D01* +X104528312Y-65930593D01* +X104516499Y-65920504D01* +X100808646Y-62212650D01* +X100780869Y-62158133D01* +X100779650Y-62142646D01* +X100779650Y-61838280D01* +X100798557Y-61780089D01* +X100838660Y-61747716D01* +X100889415Y-61725306D01* +X100968856Y-61645865D01* +X101014235Y-61543091D01* +X101017150Y-61517965D01* +X101017149Y-61190691D01* +X135049500Y-61190691D01* +X135049500Y-61309309D01* +X135068763Y-61381199D01* +X135080202Y-61423890D01* +X135139507Y-61526608D01* +X135139509Y-61526610D01* +X135139511Y-61526613D01* +X135223387Y-61610489D01* +X135223389Y-61610490D01* +X135223391Y-61610492D01* +X135326110Y-61669797D01* +X135326111Y-61669797D01* +X135326114Y-61669799D01* +X135440691Y-61700500D01* +X135440693Y-61700500D01* +X135555231Y-61700500D01* +X135613422Y-61719407D01* +X135625235Y-61729496D01* +X135887636Y-61991897D01* +X135887635Y-61991897D01* +X135958103Y-62062364D01* +X136050171Y-62100500D01* +X136050172Y-62100500D01* +X136776378Y-62100500D01* +X136834569Y-62119407D01* +X136866942Y-62159512D01* +X136872794Y-62172765D01* +X136952235Y-62252206D01* +X137055009Y-62297585D01* +X137080135Y-62300500D01* +X138344864Y-62300499D01* +X138369991Y-62297585D01* +X138472765Y-62252206D01* +X138552206Y-62172765D01* +X138597585Y-62069991D01* +X138600500Y-62044865D01* +X138600499Y-61655136D01* +X138597585Y-61630009D01* +X138552206Y-61527235D01* +X138472765Y-61447794D01* +X138369991Y-61402415D01* +X138369990Y-61402414D01* +X138369988Y-61402414D01* +X138344868Y-61399500D01* +X137080139Y-61399500D01* +X137080136Y-61399501D01* +X137055009Y-61402414D01* +X136952235Y-61447794D01* +X136872793Y-61527236D01* +X136866943Y-61540487D01* +X136826143Y-61586083D01* +X136776378Y-61599500D01* +X136244769Y-61599500D01* +X136186578Y-61580593D01* +X136174765Y-61570504D01* +X135979496Y-61375235D01* +X135951719Y-61320718D01* +X135950500Y-61305231D01* +X135950500Y-61190692D01* +X135948502Y-61183235D01* +X135919799Y-61076114D01* +X135919797Y-61076111D01* +X135919797Y-61076109D01* +X135860492Y-60973391D01* +X135860490Y-60973389D01* +X135860489Y-60973387D01* +X135776613Y-60889511D01* +X135776610Y-60889509D01* +X135776608Y-60889507D01* +X135673889Y-60830202D01* +X135673890Y-60830202D01* +X135649243Y-60823598D01* +X135559309Y-60799500D01* +X135440691Y-60799500D01* +X135379497Y-60815897D01* +X135326109Y-60830202D01* +X135223391Y-60889507D01* +X135139507Y-60973391D01* +X135080202Y-61076109D01* +X135066239Y-61128219D01* +X135049500Y-61190691D01* +X101017149Y-61190691D01* +X101017149Y-61128236D01* +X101014235Y-61103109D01* +X100968856Y-61000335D01* +X100889415Y-60920894D01* +X100786641Y-60875515D01* +X100786640Y-60875514D01* +X100786638Y-60875514D01* +X100761519Y-60872600D01* +X100761515Y-60872600D01* +X100639603Y-60872600D01* +X100581412Y-60853693D01* +X100569599Y-60843604D01* +X100543822Y-60817827D01* +X100543819Y-60817824D01* +X100498449Y-60787509D01* +X100437283Y-60746638D01* +X100437275Y-60746634D01* +X100318897Y-60697600D01* +X100318895Y-60697599D01* +X100318894Y-60697599D01* +X100193219Y-60672600D01* +X100065081Y-60672600D01* +X100065080Y-60672600D01* +X100003794Y-60684791D01* +X99939406Y-60697599D01* +X99939405Y-60697599D01* +X99939402Y-60697600D01* +X99821024Y-60746634D01* +X99821015Y-60746638D01* +X99714482Y-60817822D01* +X99688699Y-60843605D01* +X99634182Y-60871381D01* +X99618698Y-60872600D01* +X99496788Y-60872600D01* +X99496785Y-60872601D01* +X99471659Y-60875514D01* +X99368885Y-60920894D01* +X99289444Y-61000335D01* +X99244064Y-61103111D01* +X99241151Y-61128219D01* +X99241150Y-61128232D01* +X99241150Y-61517960D01* +X99241151Y-61517963D01* +X99244064Y-61543090D01* +X99260624Y-61580593D01* +X99289444Y-61645865D01* +X99368885Y-61725306D01* +X99419639Y-61747716D01* +X99465233Y-61788514D01* +X99478650Y-61838279D01* +X99478650Y-62142646D01* +X99476181Y-62150243D01* +X99477431Y-62158133D01* +X99466906Y-62178788D01* +X99459743Y-62200837D01* +X99449654Y-62212650D01* +X99311153Y-62351151D01* +X99256636Y-62378928D01* +X99196204Y-62369357D01* +X99152939Y-62326092D01* +X99142149Y-62281149D01* +X99142149Y-62078236D01* +X99139235Y-62053109D01* +X99093856Y-61950335D01* +X99014415Y-61870894D01* +X98911641Y-61825515D01* +X98911640Y-61825514D01* +X98911638Y-61825514D01* +X98886518Y-61822600D01* +X97621789Y-61822600D01* +X97621786Y-61822601D01* +X97596659Y-61825514D01* +X97493885Y-61870894D01* +X97414444Y-61950335D01* +X97369064Y-62053111D01* +X97366150Y-62078230D01* +X97366150Y-62467960D01* +X97366151Y-62467963D01* +X97369064Y-62493090D01* +X97392800Y-62546845D01* +X97414444Y-62595865D01* +X97493885Y-62675306D01* +X97596659Y-62720685D01* +X97621785Y-62723600D01* +X98699697Y-62723599D01* +X98757888Y-62742506D01* +X98793852Y-62792006D01* +X98793852Y-62853192D01* +X98769701Y-62892602D01* +X98616401Y-63045903D01* +X98561884Y-63073681D01* +X98546397Y-63074900D01* +X95152278Y-63074900D01* +X95094087Y-63055993D01* +X95058123Y-63006493D01* +X95058123Y-62945307D01* +X95058303Y-62944759D01* +X95081156Y-62875791D01* +X95091650Y-62773087D01* +X95091650Y-62073101D01* +X95091649Y-62073100D01* +X93440650Y-62073100D01* +X93382459Y-62054193D01* +X93346495Y-62004693D01* +X93341650Y-61974100D01* +X93341650Y-61823101D01* +X93341649Y-61823100D01* +X93190650Y-61823100D01* +X93132459Y-61804193D01* +X93096495Y-61754693D01* +X93091650Y-61724100D01* +X93091650Y-60173101D01* +X93591650Y-60173101D01* +X93591650Y-61573099D01* +X93591651Y-61573100D01* +X95091648Y-61573100D01* +X95091649Y-61573099D01* +X95091649Y-60873113D01* +X95081157Y-60770412D01* +X95081154Y-60770400D01* +X95026006Y-60603975D01* +X94933969Y-60454759D01* +X94809990Y-60330780D01* +X94660774Y-60238743D01* +X94494343Y-60183593D01* +X94391637Y-60173100D01* +X93591651Y-60173100D01* +X93591650Y-60173101D01* +X93091650Y-60173101D01* +X93091649Y-60173100D01* +X92291663Y-60173100D01* +X92188962Y-60183592D01* +X92188950Y-60183595D01* +X92022525Y-60238743D01* +X91873309Y-60330780D01* +X91749330Y-60454759D01* +X91657293Y-60603975D01* +X91602143Y-60770406D01* +X91591650Y-60873112D01* +X91591650Y-61419023D01* +X91572743Y-61477214D01* +X91523243Y-61513178D01* +X91462057Y-61513178D01* +X91437648Y-61501338D01* +X91378683Y-61461938D01* +X91378675Y-61461934D01* +X91260297Y-61412900D01* +X91260295Y-61412899D01* +X91260294Y-61412899D01* +X91134619Y-61387900D01* +X90541149Y-61387900D01* +X90482958Y-61368993D01* +X90446994Y-61319493D01* +X90442149Y-61288900D01* +X90442149Y-60891578D01* +X90442148Y-60891576D01* +X90427297Y-60797800D01* +X90427296Y-60797798D01* +X90427296Y-60797796D01* +X90369700Y-60684758D01* +X90279992Y-60595050D01* +X90166954Y-60537454D01* +X90166955Y-60537454D01* +X90073172Y-60522600D01* +X90073169Y-60522600D01* +X89791150Y-60522600D01* +X89732959Y-60503693D01* +X89696995Y-60454193D01* +X89692150Y-60423600D01* +X89692150Y-57472599D01* +X89711057Y-57414408D01* +X89760557Y-57378444D01* +X89791150Y-57373599D01* +X94433173Y-57373599D01* +X94433174Y-57373598D01* +X94480063Y-57366172D01* +X94526951Y-57358747D01* +X94526951Y-57358746D01* +X94526956Y-57358746D01* +X94639993Y-57301150D01* +X94729700Y-57211443D01* +X94787296Y-57098406D01* +X94802150Y-57004621D01* +X94802149Y-51862966D01* +X94821056Y-51804776D01* +X94870556Y-51768812D01* +X94931742Y-51768812D01* +X94971150Y-51792961D01* +X96411116Y-53232926D01* +X97974654Y-54796464D01* +X98002431Y-54850981D01* +X98003650Y-54866468D01* +X98003650Y-59823600D01* +X97984743Y-59881791D01* +X97935243Y-59917755D01* +X97904650Y-59922600D01* +X97621790Y-59922600D01* +X97621785Y-59922601D01* +X97596659Y-59925514D01* +X97493885Y-59970894D01* +X97414444Y-60050335D01* +X97369064Y-60153111D01* +X97366150Y-60178230D01* +X97366150Y-60567960D01* +X97366151Y-60567963D01* +X97369064Y-60593090D01* +X97394406Y-60650485D01* +X97414444Y-60695865D01* +X97493885Y-60775306D01* +X97596659Y-60820685D01* +X97621785Y-60823600D01* +X98886514Y-60823599D01* +X98911641Y-60820685D01* +X99014415Y-60775306D01* +X99093856Y-60695865D01* +X99139235Y-60593091D01* +X99142150Y-60567965D01* +X99142149Y-60178236D01* +X99139235Y-60153109D01* +X99093856Y-60050335D01* +X99014415Y-59970894D01* +X98911641Y-59925515D01* +X98911640Y-59925514D01* +X98911638Y-59925514D01* +X98886519Y-59922600D01* +X98886515Y-59922600D01* +X98603650Y-59922600D01* +X98545459Y-59903693D01* +X98509495Y-59854193D01* +X98504650Y-59823600D01* +X98504650Y-59055130D01* +X143624500Y-59055130D01* +X143624500Y-59444860D01* +X143624501Y-59444863D01* +X143627414Y-59469990D01* +X143644334Y-59508309D01* +X143672794Y-59572765D01* +X143752235Y-59652206D01* +X143855009Y-59697585D01* +X143880135Y-59700500D01* +X145092807Y-59700499D01* +X145150998Y-59719406D01* +X145186962Y-59768906D01* +X145187876Y-59827118D01* +X145152902Y-59947502D01* +X145152899Y-59947513D01* +X145152704Y-59950000D01* +X146137499Y-59950000D01* +X146137500Y-59949999D01* +X146137500Y-59400001D01* +X146637500Y-59400001D01* +X146637500Y-59949999D01* +X146637501Y-59950000D01* +X147622295Y-59950000D01* +X147622100Y-59947513D01* +X147622098Y-59947502D01* +X147576280Y-59789799D01* +X147576280Y-59789798D01* +X147492685Y-59648447D01* +X147376552Y-59532314D01* +X147235200Y-59448719D01* +X147077489Y-59402899D01* +X147040637Y-59400000D01* +X146637501Y-59400000D01* +X146637500Y-59400001D01* +X146137500Y-59400001D01* +X146137499Y-59400000D01* +X145734363Y-59400000D01* +X145697510Y-59402899D01* +X145539798Y-59448719D01* +X145538803Y-59449150D01* +X145538082Y-59449218D01* +X145533821Y-59450456D01* +X145533584Y-59449642D01* +X145477888Y-59454898D01* +X145425228Y-59423745D01* +X145400937Y-59367588D01* +X145400499Y-59358302D01* +X145400499Y-59055136D01* +X145397585Y-59030009D01* +X145352206Y-58927235D01* +X145340866Y-58915895D01* +X145313091Y-58861381D01* +X145322662Y-58800949D01* +X145340865Y-58775894D01* +X145562265Y-58554496D01* +X145616781Y-58526719D01* +X145632268Y-58525500D01* +X148430231Y-58525500D01* +X148488422Y-58544407D01* +X148500235Y-58554496D01* +X149874305Y-59928565D01* +X151248935Y-61303195D01* +X151248936Y-61303197D01* +X151319403Y-61373664D01* +X151353772Y-61387900D01* +X151411473Y-61411801D01* +X151411474Y-61411801D01* +X151522651Y-61411801D01* +X151522659Y-61411800D01* +X155135041Y-61411800D01* +X155193232Y-61430707D01* +X155205038Y-61440790D01* +X155286037Y-61521789D01* +X155286039Y-61521790D01* +X155286041Y-61521792D01* +X155388760Y-61581097D01* +X155388761Y-61581097D01* +X155388764Y-61581099D01* +X155503341Y-61611800D01* +X155503343Y-61611800D01* +X155621957Y-61611800D01* +X155621959Y-61611800D01* +X155736536Y-61581099D01* +X155736538Y-61581097D01* +X155736540Y-61581097D01* +X155839258Y-61521792D01* +X155839258Y-61521791D01* +X155839263Y-61521789D01* +X155923139Y-61437913D01* +X155924879Y-61434899D01* +X155982447Y-61335190D01* +X155982447Y-61335188D01* +X155982449Y-61335186D01* +X156013150Y-61220609D01* +X156013150Y-61101991D01* +X155982449Y-60987414D01* +X155982447Y-60987411D01* +X155982447Y-60987409D01* +X155923142Y-60884691D01* +X155923140Y-60884689D01* +X155923139Y-60884687D01* +X155839263Y-60800811D01* +X155839260Y-60800809D01* +X155839258Y-60800807D01* +X155736539Y-60741502D01* +X155736540Y-60741502D01* +X155723001Y-60737874D01* +X155621959Y-60710800D01* +X155503341Y-60710800D01* +X155433217Y-60729589D01* +X155388759Y-60741502D01* +X155286041Y-60800807D01* +X155286040Y-60800808D01* +X155286037Y-60800810D01* +X155286037Y-60800811D01* +X155205042Y-60881805D01* +X155150528Y-60909581D01* +X155135041Y-60910800D01* +X151606068Y-60910800D01* +X151547877Y-60891893D01* +X151536064Y-60881804D01* +X150153760Y-59499500D01* +X148716897Y-58062636D01* +X148716895Y-58062635D01* +X148716894Y-58062634D01* +X148624829Y-58024500D01* +X148624828Y-58024500D01* +X145537328Y-58024500D01* +X145437672Y-58024500D01* +X145437671Y-58024500D01* +X145345603Y-58062635D01* +X144637733Y-58770504D01* +X144583217Y-58798281D01* +X144567730Y-58799500D01* +X143880139Y-58799500D01* +X143880136Y-58799501D01* +X143855009Y-58802414D01* +X143752235Y-58847794D01* +X143672794Y-58927235D01* +X143627414Y-59030011D01* +X143624500Y-59055130D01* +X98504650Y-59055130D01* +X98504650Y-55458272D01* +X106191150Y-55458272D01* +X106191150Y-57187927D01* +X106199882Y-57231820D01* +X106199884Y-57231824D01* +X106232702Y-57280940D01* +X106233146Y-57281604D01* +X106282928Y-57314867D01* +X106293977Y-57317064D01* +X106326822Y-57323599D01* +X106326828Y-57323599D01* +X106326830Y-57323600D01* +X106326831Y-57323600D01* +X108056469Y-57323600D01* +X108056470Y-57323600D01* +X108056471Y-57323599D01* +X108056477Y-57323599D01* +X108078273Y-57319262D01* +X108100372Y-57314867D01* +X108150154Y-57281604D01* +X108183417Y-57231822D01* +X108188674Y-57205393D01* +X108192149Y-57187927D01* +X108192150Y-57187918D01* +X108192150Y-56224556D01* +X108731150Y-56224556D01* +X108731150Y-56421643D01* +X108769599Y-56614934D01* +X108769599Y-56614936D01* +X108845017Y-56797013D01* +X108845018Y-56797014D01* +X108954511Y-56960882D01* +X109093868Y-57100239D01* +X109257736Y-57209732D01* +X109439815Y-57285151D01* +X109633109Y-57323600D01* +X109633110Y-57323600D01* +X109830190Y-57323600D01* +X109830191Y-57323600D01* +X110023485Y-57285151D01* +X110205564Y-57209732D01* +X110369432Y-57100239D01* +X110508789Y-56960882D01* +X110618282Y-56797014D01* +X110693701Y-56614935D01* +X110732150Y-56421641D01* +X110732150Y-56224559D01* +X110732149Y-56224556D01* +X111271150Y-56224556D01* +X111271150Y-56421643D01* +X111309599Y-56614934D01* +X111309599Y-56614936D01* +X111385017Y-56797013D01* +X111385018Y-56797014D01* +X111494511Y-56960882D01* +X111633868Y-57100239D01* +X111797736Y-57209732D01* +X111979815Y-57285151D01* +X112173109Y-57323600D01* +X112173110Y-57323600D01* +X112370190Y-57323600D01* +X112370191Y-57323600D01* +X112563485Y-57285151D01* +X112745564Y-57209732D01* +X112909432Y-57100239D01* +X113048789Y-56960882D01* +X113158282Y-56797014D01* +X113233701Y-56614935D01* +X113272150Y-56421641D01* +X113272150Y-56224559D01* +X113272149Y-56224556D01* +X113811150Y-56224556D01* +X113811150Y-56421643D01* +X113849599Y-56614934D01* +X113849599Y-56614936D01* +X113925017Y-56797013D01* +X113925018Y-56797014D01* +X114034511Y-56960882D01* +X114173868Y-57100239D01* +X114337736Y-57209732D01* +X114519815Y-57285151D01* +X114713109Y-57323600D01* +X114713110Y-57323600D01* +X114910190Y-57323600D01* +X114910191Y-57323600D01* +X115103485Y-57285151D01* +X115285564Y-57209732D01* +X115449432Y-57100239D01* +X115588789Y-56960882D01* +X115698282Y-56797014D01* +X115773701Y-56614935D01* +X115812150Y-56421641D01* +X115812150Y-56224559D01* +X115812149Y-56224556D01* +X116351150Y-56224556D01* +X116351150Y-56421643D01* +X116389599Y-56614934D01* +X116389599Y-56614936D01* +X116465017Y-56797013D01* +X116465018Y-56797014D01* +X116574511Y-56960882D01* +X116713868Y-57100239D01* +X116877736Y-57209732D01* +X117059815Y-57285151D01* +X117253109Y-57323600D01* +X117253110Y-57323600D01* +X117450190Y-57323600D01* +X117450191Y-57323600D01* +X117643485Y-57285151D01* +X117805787Y-57217923D01* +X117866781Y-57213123D01* +X117913673Y-57239384D01* +X118285339Y-57611049D01* +X118285342Y-57611053D01* +X118285343Y-57611053D01* +X118290985Y-57616695D01* +X118290986Y-57616697D01* +X118361453Y-57687164D01* +X118361454Y-57687164D01* +X118361455Y-57687165D01* +X118388418Y-57698334D01* +X118388419Y-57698334D01* +X118453522Y-57725301D01* +X118453523Y-57725301D01* +X118564701Y-57725301D01* +X118564709Y-57725300D01* +X123765341Y-57725300D01* +X123823532Y-57744207D01* +X123835338Y-57754290D01* +X123916337Y-57835289D01* +X123916339Y-57835290D01* +X123916341Y-57835292D01* +X124019060Y-57894597D01* +X124019061Y-57894597D01* +X124019064Y-57894599D01* +X124133641Y-57925300D01* +X124133643Y-57925300D01* +X124252257Y-57925300D01* +X124252259Y-57925300D01* +X124366836Y-57894599D01* +X124366838Y-57894597D01* +X124366840Y-57894597D01* +X124469558Y-57835292D01* +X124469558Y-57835291D01* +X124469563Y-57835289D01* +X124553439Y-57751413D01* +X124556662Y-57745831D01* +X124612747Y-57648690D01* +X124612747Y-57648688D01* +X124612749Y-57648686D01* +X124643450Y-57534109D01* +X124643450Y-57415491D01* +X124643449Y-57415488D01* +X124642884Y-57411198D01* +X124654029Y-57351036D01* +X124698409Y-57308915D01* +X124759070Y-57300924D01* +X124760236Y-57301148D01* +X124873109Y-57323600D01* +X124873110Y-57323600D01* +X125070190Y-57323600D01* +X125070191Y-57323600D01* +X125263485Y-57285151D01* +X125445564Y-57209732D01* +X125609432Y-57100239D01* +X125748789Y-56960882D01* +X125858282Y-56797014D01* +X125933701Y-56614935D01* +X125972150Y-56421641D01* +X125972150Y-56224559D01* +X125972149Y-56224556D01* +X126511150Y-56224556D01* +X126511150Y-56421643D01* +X126549599Y-56614934D01* +X126549599Y-56614936D01* +X126625017Y-56797013D01* +X126625018Y-56797014D01* +X126734511Y-56960882D01* +X126873868Y-57100239D01* +X127037736Y-57209732D01* +X127219815Y-57285151D01* +X127413109Y-57323600D01* +X127413110Y-57323600D01* +X127610190Y-57323600D01* +X127610191Y-57323600D01* +X127803485Y-57285151D01* +X127985564Y-57209732D01* +X128149432Y-57100239D01* +X128288789Y-56960882D01* +X128398282Y-56797014D01* +X128473701Y-56614935D01* +X128512150Y-56421641D01* +X128512150Y-56224559D01* +X128512149Y-56224556D01* +X129051150Y-56224556D01* +X129051150Y-56421643D01* +X129089599Y-56614934D01* +X129089599Y-56614936D01* +X129165017Y-56797013D01* +X129165018Y-56797014D01* +X129274511Y-56960882D01* +X129413868Y-57100239D01* +X129577736Y-57209732D01* +X129759815Y-57285151D01* +X129953109Y-57323600D01* +X129953110Y-57323600D01* +X130150190Y-57323600D01* +X130150191Y-57323600D01* +X130343485Y-57285151D01* +X130525564Y-57209732D01* +X130689432Y-57100239D01* +X130828789Y-56960882D01* +X130938282Y-56797014D01* +X131013701Y-56614935D01* +X131052150Y-56421641D01* +X131052150Y-56224559D01* +X131052149Y-56224556D01* +X131591150Y-56224556D01* +X131591150Y-56421643D01* +X131629599Y-56614934D01* +X131629599Y-56614936D01* +X131705017Y-56797013D01* +X131705018Y-56797014D01* +X131814511Y-56960882D01* +X131953868Y-57100239D01* +X132117736Y-57209732D01* +X132299815Y-57285151D01* +X132493109Y-57323600D01* +X132493110Y-57323600D01* +X132690190Y-57323600D01* +X132690191Y-57323600D01* +X132883485Y-57285151D01* +X133065564Y-57209732D01* +X133229432Y-57100239D01* +X133368789Y-56960882D01* +X133478282Y-56797014D01* +X133553701Y-56614935D01* +X133592150Y-56421641D01* +X133592150Y-56224559D01* +X133592149Y-56224556D01* +X134131150Y-56224556D01* +X134131150Y-56421643D01* +X134169599Y-56614934D01* +X134169599Y-56614936D01* +X134245017Y-56797013D01* +X134245018Y-56797014D01* +X134354511Y-56960882D01* +X134493868Y-57100239D01* +X134657736Y-57209732D01* +X134839815Y-57285151D01* +X135033109Y-57323600D01* +X135033110Y-57323600D01* +X135230190Y-57323600D01* +X135230191Y-57323600D01* +X135423485Y-57285151D01* +X135605564Y-57209732D01* +X135769432Y-57100239D01* +X135908789Y-56960882D01* +X136018282Y-56797014D01* +X136093701Y-56614935D01* +X136132150Y-56421641D01* +X136132150Y-56224559D01* +X136132149Y-56224556D01* +X136671150Y-56224556D01* +X136671150Y-56421643D01* +X136709599Y-56614934D01* +X136709599Y-56614936D01* +X136785017Y-56797013D01* +X136785018Y-56797014D01* +X136894511Y-56960882D01* +X137033868Y-57100239D01* +X137197736Y-57209732D01* +X137379815Y-57285151D01* +X137573109Y-57323600D01* +X137573110Y-57323600D01* +X137770190Y-57323600D01* +X137770191Y-57323600D01* +X137963485Y-57285151D01* +X138145564Y-57209732D01* +X138309432Y-57100239D01* +X138448789Y-56960882D01* +X138558282Y-56797014D01* +X138633701Y-56614935D01* +X138672150Y-56421641D01* +X138672150Y-56224559D01* +X138672149Y-56224556D01* +X139211150Y-56224556D01* +X139211150Y-56421643D01* +X139249599Y-56614934D01* +X139249599Y-56614936D01* +X139325017Y-56797013D01* +X139325018Y-56797014D01* +X139434511Y-56960882D01* +X139573868Y-57100239D01* +X139737736Y-57209732D01* +X139919815Y-57285151D01* +X140113109Y-57323600D01* +X140113110Y-57323600D01* +X140310190Y-57323600D01* +X140310191Y-57323600D01* +X140503485Y-57285151D01* +X140685564Y-57209732D01* +X140849432Y-57100239D01* +X140988789Y-56960882D01* +X141098282Y-56797014D01* +X141173701Y-56614935D01* +X141212150Y-56421641D01* +X141212150Y-56224559D01* +X141212149Y-56224556D01* +X141751150Y-56224556D01* +X141751150Y-56421643D01* +X141789599Y-56614934D01* +X141789599Y-56614936D01* +X141865017Y-56797013D01* +X141865018Y-56797014D01* +X141974511Y-56960882D01* +X142113868Y-57100239D01* +X142277736Y-57209732D01* +X142459815Y-57285151D01* +X142653109Y-57323600D01* +X142653110Y-57323600D01* +X142850190Y-57323600D01* +X142850191Y-57323600D01* +X143043485Y-57285151D01* +X143225564Y-57209732D01* +X143389432Y-57100239D01* +X143528789Y-56960882D01* +X143638282Y-56797014D01* +X143713701Y-56614935D01* +X143752150Y-56421641D01* +X143752150Y-56224559D01* +X143752149Y-56224556D01* +X144291150Y-56224556D01* +X144291150Y-56421643D01* +X144329599Y-56614934D01* +X144329599Y-56614936D01* +X144405017Y-56797013D01* +X144405018Y-56797014D01* +X144514511Y-56960882D01* +X144653868Y-57100239D01* +X144817736Y-57209732D01* +X144999815Y-57285151D01* +X145193109Y-57323600D01* +X145193110Y-57323600D01* +X145390190Y-57323600D01* +X145390191Y-57323600D01* +X145583485Y-57285151D01* +X145765564Y-57209732D01* +X145929432Y-57100239D01* +X146068789Y-56960882D01* +X146178282Y-56797014D01* +X146253701Y-56614935D01* +X146292150Y-56421641D01* +X146292150Y-56224559D01* +X146292149Y-56224556D01* +X146831150Y-56224556D01* +X146831150Y-56421643D01* +X146869599Y-56614934D01* +X146869599Y-56614936D01* +X146945017Y-56797013D01* +X146945018Y-56797014D01* +X147054511Y-56960882D01* +X147193868Y-57100239D01* +X147357736Y-57209732D01* +X147539815Y-57285151D01* +X147733109Y-57323600D01* +X147733110Y-57323600D01* +X147930190Y-57323600D01* +X147930191Y-57323600D01* +X148123485Y-57285151D01* +X148305564Y-57209732D01* +X148469432Y-57100239D01* +X148608789Y-56960882D01* +X148718282Y-56797014D01* +X148793701Y-56614935D01* +X148832150Y-56421641D01* +X148832150Y-56224559D01* +X148793701Y-56031265D01* +X148718282Y-55849186D01* +X148608789Y-55685318D01* +X148469432Y-55545961D01* +X148342641Y-55461242D01* +X148305563Y-55436467D01* +X148123485Y-55361049D01* +X147930193Y-55322600D01* +X147930191Y-55322600D01* +X147733109Y-55322600D01* +X147733106Y-55322600D01* +X147539815Y-55361049D01* +X147539813Y-55361049D01* +X147357736Y-55436467D01* +X147193868Y-55545961D01* +X147193864Y-55545964D01* +X147054514Y-55685314D01* +X147054511Y-55685318D01* +X146945017Y-55849186D01* +X146869599Y-56031263D01* +X146869599Y-56031265D01* +X146831150Y-56224556D01* +X146292149Y-56224556D01* +X146253701Y-56031265D01* +X146178282Y-55849186D01* +X146068789Y-55685318D01* +X145929432Y-55545961D01* +X145802641Y-55461242D01* +X145765563Y-55436467D01* +X145583485Y-55361049D01* +X145390193Y-55322600D01* +X145390191Y-55322600D01* +X145193109Y-55322600D01* +X145193106Y-55322600D01* +X144999815Y-55361049D01* +X144999813Y-55361049D01* +X144817736Y-55436467D01* +X144653868Y-55545961D01* +X144653864Y-55545964D01* +X144514514Y-55685314D01* +X144514511Y-55685318D01* +X144405017Y-55849186D01* +X144329599Y-56031263D01* +X144329599Y-56031265D01* +X144291150Y-56224556D01* +X143752149Y-56224556D01* +X143713701Y-56031265D01* +X143638282Y-55849186D01* +X143528789Y-55685318D01* +X143389432Y-55545961D01* +X143262641Y-55461242D01* +X143225563Y-55436467D01* +X143043485Y-55361049D01* +X142850193Y-55322600D01* +X142850191Y-55322600D01* +X142653109Y-55322600D01* +X142653106Y-55322600D01* +X142459815Y-55361049D01* +X142459813Y-55361049D01* +X142277736Y-55436467D01* +X142113868Y-55545961D01* +X142113864Y-55545964D01* +X141974514Y-55685314D01* +X141974511Y-55685318D01* +X141865017Y-55849186D01* +X141789599Y-56031263D01* +X141789599Y-56031265D01* +X141751150Y-56224556D01* +X141212149Y-56224556D01* +X141173701Y-56031265D01* +X141098282Y-55849186D01* +X140988789Y-55685318D01* +X140849432Y-55545961D01* +X140722641Y-55461242D01* +X140685563Y-55436467D01* +X140503485Y-55361049D01* +X140310193Y-55322600D01* +X140310191Y-55322600D01* +X140113109Y-55322600D01* +X140113106Y-55322600D01* +X139919815Y-55361049D01* +X139919813Y-55361049D01* +X139737736Y-55436467D01* +X139573868Y-55545961D01* +X139573864Y-55545964D01* +X139434514Y-55685314D01* +X139434511Y-55685318D01* +X139325017Y-55849186D01* +X139249599Y-56031263D01* +X139249599Y-56031265D01* +X139211150Y-56224556D01* +X138672149Y-56224556D01* +X138633701Y-56031265D01* +X138558282Y-55849186D01* +X138448789Y-55685318D01* +X138309432Y-55545961D01* +X138182641Y-55461242D01* +X138145563Y-55436467D01* +X137963485Y-55361049D01* +X137770193Y-55322600D01* +X137770191Y-55322600D01* +X137573109Y-55322600D01* +X137573106Y-55322600D01* +X137379815Y-55361049D01* +X137379813Y-55361049D01* +X137197736Y-55436467D01* +X137033868Y-55545961D01* +X137033864Y-55545964D01* +X136894514Y-55685314D01* +X136894511Y-55685318D01* +X136785017Y-55849186D01* +X136709599Y-56031263D01* +X136709599Y-56031265D01* +X136671150Y-56224556D01* +X136132149Y-56224556D01* +X136093701Y-56031265D01* +X136018282Y-55849186D01* +X135908789Y-55685318D01* +X135769432Y-55545961D01* +X135642641Y-55461242D01* +X135605563Y-55436467D01* +X135423485Y-55361049D01* +X135230193Y-55322600D01* +X135230191Y-55322600D01* +X135033109Y-55322600D01* +X135033106Y-55322600D01* +X134839815Y-55361049D01* +X134839813Y-55361049D01* +X134657736Y-55436467D01* +X134493868Y-55545961D01* +X134493864Y-55545964D01* +X134354514Y-55685314D01* +X134354511Y-55685318D01* +X134245017Y-55849186D01* +X134169599Y-56031263D01* +X134169599Y-56031265D01* +X134131150Y-56224556D01* +X133592149Y-56224556D01* +X133553701Y-56031265D01* +X133478282Y-55849186D01* +X133368789Y-55685318D01* +X133229432Y-55545961D01* +X133102641Y-55461242D01* +X133065563Y-55436467D01* +X132883485Y-55361049D01* +X132690193Y-55322600D01* +X132690191Y-55322600D01* +X132493109Y-55322600D01* +X132493106Y-55322600D01* +X132299815Y-55361049D01* +X132299813Y-55361049D01* +X132117736Y-55436467D01* +X131953868Y-55545961D01* +X131953864Y-55545964D01* +X131814514Y-55685314D01* +X131814511Y-55685318D01* +X131705017Y-55849186D01* +X131629599Y-56031263D01* +X131629599Y-56031265D01* +X131591150Y-56224556D01* +X131052149Y-56224556D01* +X131013701Y-56031265D01* +X130938282Y-55849186D01* +X130828789Y-55685318D01* +X130689432Y-55545961D01* +X130562641Y-55461242D01* +X130525563Y-55436467D01* +X130343485Y-55361049D01* +X130150193Y-55322600D01* +X130150191Y-55322600D01* +X129953109Y-55322600D01* +X129953106Y-55322600D01* +X129759815Y-55361049D01* +X129759813Y-55361049D01* +X129577736Y-55436467D01* +X129413868Y-55545961D01* +X129413864Y-55545964D01* +X129274514Y-55685314D01* +X129274511Y-55685318D01* +X129165017Y-55849186D01* +X129089599Y-56031263D01* +X129089599Y-56031265D01* +X129051150Y-56224556D01* +X128512149Y-56224556D01* +X128473701Y-56031265D01* +X128398282Y-55849186D01* +X128288789Y-55685318D01* +X128149432Y-55545961D01* +X128022641Y-55461242D01* +X127985563Y-55436467D01* +X127803485Y-55361049D01* +X127610193Y-55322600D01* +X127610191Y-55322600D01* +X127413109Y-55322600D01* +X127413106Y-55322600D01* +X127219815Y-55361049D01* +X127219813Y-55361049D01* +X127037736Y-55436467D01* +X126873868Y-55545961D01* +X126873864Y-55545964D01* +X126734514Y-55685314D01* +X126734511Y-55685318D01* +X126625017Y-55849186D01* +X126549599Y-56031263D01* +X126549599Y-56031265D01* +X126511150Y-56224556D01* +X125972149Y-56224556D01* +X125933701Y-56031265D01* +X125858282Y-55849186D01* +X125748789Y-55685318D01* +X125609432Y-55545961D01* +X125482641Y-55461242D01* +X125445563Y-55436467D01* +X125263485Y-55361049D01* +X125070193Y-55322600D01* +X125070191Y-55322600D01* +X124873109Y-55322600D01* +X124873106Y-55322600D01* +X124679815Y-55361049D01* +X124679813Y-55361049D01* +X124497736Y-55436467D01* +X124333868Y-55545961D01* +X124333864Y-55545964D01* +X124194514Y-55685314D01* +X124194511Y-55685318D01* +X124085017Y-55849186D01* +X124009599Y-56031263D01* +X124009599Y-56031265D01* +X123971150Y-56224556D01* +X123971150Y-56421643D01* +X124009599Y-56614934D01* +X124009599Y-56614936D01* +X124085017Y-56797014D01* +X124085019Y-56797016D01* +X124144453Y-56885966D01* +X124161062Y-56944854D01* +X124139884Y-57002257D01* +X124089011Y-57036250D01* +X124087818Y-57036578D01* +X124049910Y-57046735D01* +X124019059Y-57055002D01* +X123916341Y-57114307D01* +X123916340Y-57114308D01* +X123916337Y-57114310D01* +X123916337Y-57114311D01* +X123835342Y-57195305D01* +X123780828Y-57223081D01* +X123765341Y-57224300D01* +X123184379Y-57224300D01* +X123126188Y-57205393D01* +X123090224Y-57155893D01* +X123090224Y-57094707D01* +X123114375Y-57055296D01* +X123153572Y-57016099D01* +X123208789Y-56960882D01* +X123318282Y-56797014D01* +X123393701Y-56614935D01* +X123432150Y-56421641D01* +X123432150Y-56224559D01* +X123393701Y-56031265D01* +X123318282Y-55849186D01* +X123208789Y-55685318D01* +X123069432Y-55545961D01* +X122942641Y-55461242D01* +X122905563Y-55436467D01* +X122723485Y-55361049D01* +X122530193Y-55322600D01* +X122530191Y-55322600D01* +X122333109Y-55322600D01* +X122333106Y-55322600D01* +X122139815Y-55361049D01* +X122139813Y-55361049D01* +X121957736Y-55436467D01* +X121793868Y-55545961D01* +X121793864Y-55545964D01* +X121654514Y-55685314D01* +X121654511Y-55685318D01* +X121545017Y-55849186D01* +X121469599Y-56031263D01* +X121469599Y-56031265D01* +X121431150Y-56224556D01* +X121431150Y-56421643D01* +X121469599Y-56614934D01* +X121469599Y-56614936D01* +X121545017Y-56797013D01* +X121545018Y-56797014D01* +X121654511Y-56960882D01* +X121654514Y-56960885D01* +X121748925Y-57055296D01* +X121776702Y-57109813D01* +X121767131Y-57170245D01* +X121723866Y-57213510D01* +X121678921Y-57224300D01* +X120644379Y-57224300D01* +X120586188Y-57205393D01* +X120550224Y-57155893D01* +X120550224Y-57094707D01* +X120574375Y-57055296D01* +X120613572Y-57016099D01* +X120668789Y-56960882D01* +X120778282Y-56797014D01* +X120853701Y-56614935D01* +X120892150Y-56421641D01* +X120892150Y-56224559D01* +X120853701Y-56031265D01* +X120778282Y-55849186D01* +X120668789Y-55685318D01* +X120529432Y-55545961D01* +X120402641Y-55461242D01* +X120365563Y-55436467D01* +X120183485Y-55361049D01* +X119990193Y-55322600D01* +X119990191Y-55322600D01* +X119793109Y-55322600D01* +X119793106Y-55322600D01* +X119599815Y-55361049D01* +X119599813Y-55361049D01* +X119417736Y-55436467D01* +X119253868Y-55545961D01* +X119253864Y-55545964D01* +X119114514Y-55685314D01* +X119114511Y-55685318D01* +X119005017Y-55849186D01* +X118929599Y-56031263D01* +X118929599Y-56031265D01* +X118891150Y-56224556D01* +X118891150Y-56421643D01* +X118929599Y-56614934D01* +X118929599Y-56614936D01* +X119005017Y-56797013D01* +X119005018Y-56797014D01* +X119114511Y-56960882D01* +X119114514Y-56960885D01* +X119208925Y-57055296D01* +X119236702Y-57109813D01* +X119227131Y-57170245D01* +X119183866Y-57213510D01* +X119138921Y-57224300D01* +X118648117Y-57224300D01* +X118589926Y-57205393D01* +X118578113Y-57195303D01* +X118267934Y-56885123D01* +X118240157Y-56830607D01* +X118246473Y-56777237D01* +X118313701Y-56614935D01* +X118352150Y-56421641D01* +X118352150Y-56224559D01* +X118313701Y-56031265D01* +X118238282Y-55849186D01* +X118128789Y-55685318D01* +X117989432Y-55545961D01* +X117862641Y-55461242D01* +X117825563Y-55436467D01* +X117643485Y-55361049D01* +X117450193Y-55322600D01* +X117450191Y-55322600D01* +X117253109Y-55322600D01* +X117253106Y-55322600D01* +X117059815Y-55361049D01* +X117059813Y-55361049D01* +X116877736Y-55436467D01* +X116713868Y-55545961D01* +X116713864Y-55545964D01* +X116574514Y-55685314D01* +X116574511Y-55685318D01* +X116465017Y-55849186D01* +X116389599Y-56031263D01* +X116389599Y-56031265D01* +X116351150Y-56224556D01* +X115812149Y-56224556D01* +X115773701Y-56031265D01* +X115698282Y-55849186D01* +X115588789Y-55685318D01* +X115449432Y-55545961D01* +X115322641Y-55461242D01* +X115285563Y-55436467D01* +X115103485Y-55361049D01* +X114910193Y-55322600D01* +X114910191Y-55322600D01* +X114713109Y-55322600D01* +X114713106Y-55322600D01* +X114519815Y-55361049D01* +X114519813Y-55361049D01* +X114337736Y-55436467D01* +X114173868Y-55545961D01* +X114173864Y-55545964D01* +X114034514Y-55685314D01* +X114034511Y-55685318D01* +X113925017Y-55849186D01* +X113849599Y-56031263D01* +X113849599Y-56031265D01* +X113811150Y-56224556D01* +X113272149Y-56224556D01* +X113233701Y-56031265D01* +X113158282Y-55849186D01* +X113048789Y-55685318D01* +X112909432Y-55545961D01* +X112782641Y-55461242D01* +X112745563Y-55436467D01* +X112563485Y-55361049D01* +X112370193Y-55322600D01* +X112370191Y-55322600D01* +X112173109Y-55322600D01* +X112173106Y-55322600D01* +X111979815Y-55361049D01* +X111979813Y-55361049D01* +X111797736Y-55436467D01* +X111633868Y-55545961D01* +X111633864Y-55545964D01* +X111494514Y-55685314D01* +X111494511Y-55685318D01* +X111385017Y-55849186D01* +X111309599Y-56031263D01* +X111309599Y-56031265D01* +X111271150Y-56224556D01* +X110732149Y-56224556D01* +X110693701Y-56031265D01* +X110618282Y-55849186D01* +X110508789Y-55685318D01* +X110369432Y-55545961D01* +X110242641Y-55461242D01* +X110205563Y-55436467D01* +X110023485Y-55361049D01* +X109830193Y-55322600D01* +X109830191Y-55322600D01* +X109633109Y-55322600D01* +X109633106Y-55322600D01* +X109439815Y-55361049D01* +X109439813Y-55361049D01* +X109257736Y-55436467D01* +X109093868Y-55545961D01* +X109093864Y-55545964D01* +X108954514Y-55685314D01* +X108954511Y-55685318D01* +X108845017Y-55849186D01* +X108769599Y-56031263D01* +X108769599Y-56031265D01* +X108731150Y-56224556D01* +X108192150Y-56224556D01* +X108192150Y-55458281D01* +X108192149Y-55458272D01* +X108183417Y-55414379D01* +X108183415Y-55414375D01* +X108161911Y-55382192D01* +X108150154Y-55364596D01* +X108149490Y-55364152D01* +X108100374Y-55331334D01* +X108100370Y-55331332D01* +X108056477Y-55322600D01* +X108056470Y-55322600D01* +X106326830Y-55322600D01* +X106326822Y-55322600D01* +X106282929Y-55331332D01* +X106282925Y-55331334D01* +X106233148Y-55364594D01* +X106233144Y-55364598D01* +X106199884Y-55414375D01* +X106199882Y-55414379D01* +X106191150Y-55458272D01* +X98504650Y-55458272D01* +X98504650Y-54783059D01* +X98504651Y-54783050D01* +X98504651Y-54671873D01* +X98478715Y-54609258D01* +X98476621Y-54604205D01* +X98466514Y-54579803D01* +X98396047Y-54509336D01* +X98396045Y-54509335D01* +X94770947Y-50884236D01* +X94770945Y-50884235D01* +X94770944Y-50884234D01* +X94678879Y-50846100D01* +X94678878Y-50846100D01* +X86147978Y-50846100D01* +X86048322Y-50846100D01* +X86048321Y-50846100D01* +X85956253Y-50884235D01* +X85576884Y-51263604D01* +X85522368Y-51291381D01* +X85506881Y-51292600D01* +X84270128Y-51292600D01* +X84270126Y-51292601D01* +X84176350Y-51307452D01* +X84176345Y-51307454D01* +X84063309Y-51365049D01* +X83973599Y-51454759D01* +X83916004Y-51567795D01* +X83901150Y-51661578D01* +X83901150Y-52424621D01* +X83901151Y-52424623D01* +X83916002Y-52518399D01* +X83916004Y-52518404D01* +X83973600Y-52631442D01* +X84063308Y-52721150D01* +X84176346Y-52778746D01* +X84270131Y-52793600D01* +X85506880Y-52793599D01* +X85565071Y-52812506D01* +X85576884Y-52822595D01* +X86308254Y-53553965D01* +X86336031Y-53608482D01* +X86337250Y-53623969D01* +X86337250Y-55813052D01* +X86318343Y-55871243D01* +X86268843Y-55907207D01* +X86207657Y-55907207D01* +X86193305Y-55901261D01* +X86126957Y-55867455D01* +X86126955Y-55867454D01* +X86033171Y-55852600D01* +X84270128Y-55852600D01* +X84270126Y-55852601D01* +X84176350Y-55867452D01* +X84176345Y-55867454D01* +X84063309Y-55925049D01* +X83973599Y-56014759D01* +X83916004Y-56127795D01* +X83901150Y-56221578D01* +X83901150Y-56892645D01* +X83882243Y-56950836D01* +X83872154Y-56962649D01* +X82758870Y-58075934D01* +X82705975Y-58155100D01* +X82687684Y-58182473D01* +X82638650Y-58300852D01* +X82638649Y-58300855D01* +X82638649Y-58300856D01* +X82634324Y-58322600D01* +X82618739Y-58400950D01* +X82613650Y-58426531D01* +X80779716Y-58426531D01* +X80766348Y-45201810D01* +X83341150Y-45201810D01* +X83341150Y-45444389D01* +X83344041Y-45466350D01* +X83372395Y-45681725D01* +X83372811Y-45684881D01* +X83372811Y-45684886D01* +X83393990Y-45763926D01* +X83435364Y-45918336D01* +X83435594Y-45919192D01* +X83435598Y-45919205D01* +X83528422Y-46143304D01* +X83528424Y-46143308D01* +X83528426Y-46143312D01* +X83649714Y-46353389D01* +X83649716Y-46353392D01* +X83797379Y-46545831D01* +X83797381Y-46545833D01* +X83797385Y-46545838D01* +X83968912Y-46717365D01* +X83968916Y-46717368D01* +X83968918Y-46717370D01* +X84071746Y-46796272D01* +X84161361Y-46865036D01* +X84371438Y-46986324D01* +X84595550Y-47079154D01* +X84829861Y-47141938D01* +X85070362Y-47173600D01* +X85070363Y-47173600D01* +X85312937Y-47173600D01* +X85312938Y-47173600D01* +X85553439Y-47141938D01* +X85787750Y-47079154D01* +X86011862Y-46986324D01* +X86221939Y-46865036D01* +X86414388Y-46717365D01* +X86585915Y-46545838D01* +X86733586Y-46353389D01* +X86785315Y-46263791D01* +X94133850Y-46263791D01* +X94133850Y-46382409D01* +X94148395Y-46436692D01* +X94164552Y-46496990D01* +X94223857Y-46599708D01* +X94223859Y-46599710D01* +X94223861Y-46599713D01* +X94307737Y-46683589D01* +X94307739Y-46683590D01* +X94307741Y-46683592D01* +X94410460Y-46742897D01* +X94410461Y-46742897D01* +X94410464Y-46742899D01* +X94525041Y-46773600D01* +X94525043Y-46773600D01* +X94643657Y-46773600D01* +X94643659Y-46773600D01* +X94758236Y-46742899D01* +X94758238Y-46742897D01* +X94758240Y-46742897D01* +X94860958Y-46683592D01* +X94860958Y-46683591D01* +X94860963Y-46683589D01* +X94941957Y-46602594D01* +X94996472Y-46574819D01* +X95011959Y-46573600D01* +X97092151Y-46573600D01* +X97150342Y-46592507D01* +X97186306Y-46642007D01* +X97191151Y-46672600D01* +X97191151Y-47079623D01* +X97206002Y-47173399D01* +X97206004Y-47173404D01* +X97263600Y-47286442D01* +X97353308Y-47376150D01* +X97466346Y-47433746D01* +X97560131Y-47448600D01* +X98823168Y-47448599D01* +X98823171Y-47448599D01* +X98823172Y-47448598D01* +X98870061Y-47441172D01* +X98916949Y-47433747D01* +X98916949Y-47433746D01* +X98916954Y-47433746D01* +X99029992Y-47376150D01* +X99119700Y-47286442D01* +X99177296Y-47173404D01* +X99192150Y-47079619D01* +X99192149Y-46826862D01* +X99211056Y-46768675D01* +X99260556Y-46732711D01* +X99321741Y-46732710D01* +X99371241Y-46768674D01* +X99385304Y-46796272D01* +X99440554Y-46966315D01* +X99537025Y-47155652D01* +X99661927Y-47327564D01* +X99812185Y-47477822D01* +X99984097Y-47602724D01* +X100173434Y-47699195D01* +X100375527Y-47764858D01* +X100441649Y-47775331D01* +X100441650Y-47775330D01* +X100441650Y-46727245D01* +X100508307Y-46765730D01* +X100629115Y-46798100D01* +X100754185Y-46798100D01* +X100874993Y-46765730D01* +X100941650Y-46727245D01* +X100941650Y-47775331D01* +X101007772Y-47764858D01* +X101209865Y-47699195D01* +X101399202Y-47602724D01* +X101571114Y-47477822D01* +X101721372Y-47327564D01* +X101846274Y-47155652D01* +X101942745Y-46966315D01* +X102008409Y-46764221D01* +X102021876Y-46679193D01* +X102049653Y-46624677D01* +X102104170Y-46596899D01* +X102164602Y-46606470D01* +X102207866Y-46649735D01* +X102216755Y-46675365D01* +X102229599Y-46739936D01* +X102305017Y-46922013D01* +X102321722Y-46947013D01* +X102414511Y-47085882D01* +X102553868Y-47225239D01* +X102717736Y-47334732D01* +X102899815Y-47410151D01* +X103093109Y-47448600D01* +X103093110Y-47448600D01* +X103290190Y-47448600D01* +X103290191Y-47448600D01* +X103483485Y-47410151D01* +X103665564Y-47334732D01* +X103829432Y-47225239D01* +X103968789Y-47085882D01* +X104078282Y-46922014D01* +X104153701Y-46739935D01* +X104192150Y-46546641D01* +X104192150Y-46099559D01* +X104192149Y-46099556D01* +X104691150Y-46099556D01* +X104691150Y-46546643D01* +X104712966Y-46656317D01* +X104726011Y-46721899D01* +X104729599Y-46739934D01* +X104729599Y-46739936D01* +X104805017Y-46922013D01* +X104821722Y-46947013D01* +X104914511Y-47085882D01* +X105053868Y-47225239D01* +X105217736Y-47334732D01* +X105399815Y-47410151D01* +X105593109Y-47448600D01* +X105593110Y-47448600D01* +X105790190Y-47448600D01* +X105790191Y-47448600D01* +X105983485Y-47410151D01* +X106165564Y-47334732D01* +X106329432Y-47225239D01* +X106468789Y-47085882D01* +X106578282Y-46922014D01* +X106653701Y-46739935D01* +X106659413Y-46711216D01* +X106689309Y-46657833D01* +X106744874Y-46632216D01* +X106804884Y-46644152D01* +X106826515Y-46660526D01* +X107307928Y-47141938D01* +X107782685Y-47616695D01* +X107782686Y-47616697D01* +X107853153Y-47687164D01* +X107878348Y-47697600D01* +X107891362Y-47702991D01* +X107891364Y-47702992D01* +X107902313Y-47707527D01* +X107945222Y-47725301D01* +X107945223Y-47725301D01* +X108056401Y-47725301D01* +X108056409Y-47725300D01* +X110826404Y-47725300D01* +X110884595Y-47744207D01* +X110920559Y-47793707D01* +X110920559Y-47854893D01* +X110884595Y-47904393D01* +X110864289Y-47915764D01* +X110717736Y-47976467D01* +X110553868Y-48085961D01* +X110553864Y-48085964D01* +X110414514Y-48225314D01* +X110414511Y-48225318D01* +X110305017Y-48389186D01* +X110229599Y-48571263D01* +X110229599Y-48571265D01* +X110191150Y-48764556D01* +X110191150Y-48961643D01* +X110212506Y-49069003D01* +X110227962Y-49146707D01* +X110229599Y-49154934D01* +X110229599Y-49154936D01* +X110305017Y-49337013D01* +X110341349Y-49391388D01* +X110414511Y-49500882D01* +X110553868Y-49640239D01* +X110717736Y-49749732D01* +X110899815Y-49825151D01* +X111076333Y-49860263D01* +X111129717Y-49890160D01* +X111155333Y-49945725D01* +X111143396Y-50005735D01* +X111098466Y-50047267D01* +X111072506Y-50055142D01* +X110875528Y-50086340D01* +X110673434Y-50152004D01* +X110484096Y-50248476D01* +X110484092Y-50248478D01* +X110429932Y-50287828D01* +X111062241Y-50920137D01* +X110998657Y-50937175D01* +X110884643Y-51003001D01* +X110791551Y-51096093D01* +X110725725Y-51210107D01* +X110708687Y-51273691D01* +X110076378Y-50641382D01* +X110037028Y-50695542D01* +X110037026Y-50695546D01* +X109940554Y-50884884D01* +X109874890Y-51086978D01* +X109841650Y-51296849D01* +X109841650Y-51509350D01* +X109874890Y-51719221D01* +X109940554Y-51921315D01* +X110037026Y-52110653D01* +X110037030Y-52110659D01* +X110076378Y-52164816D01* +X110076379Y-52164816D01* +X110708687Y-51532507D01* +X110725725Y-51596093D01* +X110791551Y-51710107D01* +X110884643Y-51803199D01* +X110998657Y-51869025D01* +X111062239Y-51886062D01* +X110429932Y-52518369D01* +X110429932Y-52518370D01* +X110484090Y-52557719D01* +X110484096Y-52557723D01* +X110673434Y-52654195D01* +X110875528Y-52719859D01* +X111085400Y-52753100D01* +X111297900Y-52753100D01* +X111507771Y-52719859D01* +X111709865Y-52654195D01* +X111899206Y-52557720D01* +X111953366Y-52518370D01* +X111321058Y-51886062D01* +X111384643Y-51869025D01* +X111498657Y-51803199D01* +X111591749Y-51710107D01* +X111657575Y-51596093D01* +X111674612Y-51532508D01* +X112306920Y-52164816D01* +X112346270Y-52110656D01* +X112442745Y-51921315D01* +X112508409Y-51719221D01* +X112541650Y-51509350D01* +X112541650Y-51296849D01* +X112508409Y-51086978D01* +X112442745Y-50884884D01* +X112346273Y-50695546D01* +X112346269Y-50695540D01* +X112306920Y-50641382D01* +X112306919Y-50641382D01* +X111674612Y-51273689D01* +X111657575Y-51210107D01* +X111591749Y-51096093D01* +X111498657Y-51003001D01* +X111384643Y-50937175D01* +X111321057Y-50920137D01* +X111953366Y-50287829D01* +X111953366Y-50287828D01* +X111899209Y-50248480D01* +X111899203Y-50248476D01* +X111709865Y-50152004D01* +X111507771Y-50086340D01* +X111310793Y-50055142D01* +X111256276Y-50027364D01* +X111228499Y-49972848D01* +X111238070Y-49912416D01* +X111281335Y-49869151D01* +X111306964Y-49860263D01* +X111483485Y-49825151D01* +X111665564Y-49749732D01* +X111829432Y-49640239D01* +X111968789Y-49500882D01* +X112078282Y-49337014D01* +X112153701Y-49154935D01* +X112192150Y-48961641D01* +X112192150Y-48764559D01* +X112153701Y-48571265D01* +X112078282Y-48389186D01* +X111968789Y-48225318D01* +X111829432Y-48085961D01* +X111665564Y-47976468D01* +X111665565Y-47976468D01* +X111665563Y-47976467D01* +X111519011Y-47915764D01* +X111472485Y-47876028D01* +X111458201Y-47816533D01* +X111481616Y-47760005D01* +X111533785Y-47728035D01* +X111556896Y-47725300D01* +X113708381Y-47725300D01* +X113766572Y-47744207D01* +X113778385Y-47754296D01* +X114278654Y-48254565D01* +X114306431Y-48309082D01* +X114307650Y-48324569D01* +X114307650Y-48439109D01* +X114318160Y-48478331D01* +X114338352Y-48553690D01* +X114397657Y-48656408D01* +X114397659Y-48656410D01* +X114397661Y-48656413D01* +X114481537Y-48740289D01* +X114481539Y-48740290D01* +X114481541Y-48740292D01* +X114584260Y-48799597D01* +X114584261Y-48799597D01* +X114584264Y-48799599D01* +X114698841Y-48830300D01* +X114698843Y-48830300D01* +X114817457Y-48830300D01* +X114817459Y-48830300D01* +X114932036Y-48799599D01* +X114932038Y-48799597D01* +X114932040Y-48799597D01* +X115034758Y-48740292D01* +X115034758Y-48740291D01* +X115034763Y-48740289D01* +X115118639Y-48656413D01* +X115125698Y-48644186D01* +X115177947Y-48553690D01* +X115177947Y-48553688D01* +X115177949Y-48553686D01* +X115208650Y-48439109D01* +X115208650Y-48320491D01* +X115177949Y-48205914D01* +X115177947Y-48205911D01* +X115177947Y-48205909D01* +X115118642Y-48103191D01* +X115118640Y-48103189D01* +X115118639Y-48103187D01* +X115034763Y-48019311D01* +X115034760Y-48019309D01* +X115034758Y-48019307D01* +X114932039Y-47960002D01* +X114932040Y-47960002D01* +X114882411Y-47946704D01* +X114817459Y-47929300D01* +X114702919Y-47929300D01* +X114644728Y-47910393D01* +X114632915Y-47900304D01* +X114330210Y-47597599D01* +X113995047Y-47262436D01* +X113995045Y-47262435D01* +X113995044Y-47262434D01* +X113902979Y-47224300D01* +X113902978Y-47224300D01* +X112291150Y-47224300D01* +X112232959Y-47205393D01* +X112196995Y-47155893D01* +X112192150Y-47125300D01* +X112192150Y-45566578D01* +X115191150Y-45566578D01* +X115191150Y-47079621D01* +X115191151Y-47079623D01* +X115206002Y-47173399D01* +X115206004Y-47173404D01* +X115263600Y-47286442D01* +X115353308Y-47376150D01* +X115466346Y-47433746D01* +X115560131Y-47448600D01* +X116823168Y-47448599D01* +X116823171Y-47448599D01* +X116823172Y-47448598D01* +X116870061Y-47441172D01* +X116916949Y-47433747D01* +X116916949Y-47433746D01* +X116916954Y-47433746D01* +X117029992Y-47376150D01* +X117119700Y-47286442D01* +X117177296Y-47173404D01* +X117192150Y-47079619D01* +X117192149Y-46099556D01* +X117691150Y-46099556D01* +X117691150Y-46546643D01* +X117712966Y-46656317D01* +X117726011Y-46721899D01* +X117729599Y-46739934D01* +X117729599Y-46739936D01* +X117805017Y-46922013D01* +X117821722Y-46947013D01* +X117914511Y-47085882D01* +X118053868Y-47225239D01* +X118217736Y-47334732D01* +X118399815Y-47410151D01* +X118593109Y-47448600D01* +X118593110Y-47448600D01* +X118790190Y-47448600D01* +X118790191Y-47448600D01* +X118983485Y-47410151D01* +X119165564Y-47334732D01* +X119329432Y-47225239D01* +X119468789Y-47085882D01* +X119578282Y-46922014D01* +X119653701Y-46739935D01* +X119666544Y-46675365D01* +X119696440Y-46621982D01* +X119752005Y-46596366D01* +X119812015Y-46608303D01* +X119853548Y-46653232D01* +X119861423Y-46679192D01* +X119874891Y-46764222D01* +X119940554Y-46966315D01* +X120037025Y-47155652D01* +X120161927Y-47327564D01* +X120312185Y-47477822D01* +X120484097Y-47602724D01* +X120673434Y-47699195D01* +X120875527Y-47764858D01* +X120941649Y-47775331D01* +X120941650Y-47775330D01* +X120941650Y-46727245D01* +X121008307Y-46765730D01* +X121129115Y-46798100D01* +X121254185Y-46798100D01* +X121374993Y-46765730D01* +X121441650Y-46727245D01* +X121441650Y-47775331D01* +X121507772Y-47764858D01* +X121709865Y-47699195D01* +X121899202Y-47602724D01* +X122071114Y-47477822D01* +X122221372Y-47327564D01* +X122346274Y-47155652D01* +X122442745Y-46966315D01* +X122508409Y-46764221D01* +X122538680Y-46573100D01* +X121595796Y-46573100D01* +X121634280Y-46506443D01* +X121666650Y-46385635D01* +X121666650Y-46260565D01* +X121634280Y-46139757D01* +X121595796Y-46073100D01* +X122538680Y-46073100D01* +X122538680Y-46073099D01* +X122508409Y-45881978D01* +X122442745Y-45679884D01* +X122393195Y-45582636D01* +X122372275Y-45541578D01* +X126191150Y-45541578D01* +X126191150Y-47104621D01* +X126191151Y-47104623D01* +X126206002Y-47198399D01* +X126206004Y-47198404D01* +X126263600Y-47311442D01* +X126353308Y-47401150D01* +X126466346Y-47458746D01* +X126560131Y-47473600D01* +X127823168Y-47473599D01* +X127823171Y-47473599D01* +X127823172Y-47473598D01* +X127870061Y-47466172D01* +X127916949Y-47458747D01* +X127916949Y-47458746D01* +X127916954Y-47458746D01* +X128029992Y-47401150D01* +X128119700Y-47311442D01* +X128177296Y-47198404D01* +X128192150Y-47104619D01* +X128192149Y-46851863D01* +X128211056Y-46793676D01* +X128260556Y-46757712D01* +X128321741Y-46757711D01* +X128371241Y-46793675D01* +X128385304Y-46821273D01* +X128440554Y-46991315D01* +X128537025Y-47180652D01* +X128661927Y-47352564D01* +X128812185Y-47502822D01* +X128984097Y-47627724D01* +X129173434Y-47724195D01* +X129375527Y-47789858D01* +X129441649Y-47800331D01* +X129441650Y-47800330D01* +X129441650Y-46756112D01* +X129498657Y-46789025D01* +X129625824Y-46823100D01* +X129757476Y-46823100D01* +X129884643Y-46789025D01* +X129941650Y-46756112D01* +X129941650Y-47800331D01* +X130007772Y-47789858D01* +X130209865Y-47724195D01* +X130399202Y-47627724D01* +X130571114Y-47502822D01* +X130721372Y-47352564D01* +X130846274Y-47180652D01* +X130942745Y-46991315D01* +X131008409Y-46789221D01* +X131041650Y-46579350D01* +X131041650Y-46573101D01* +X131041649Y-46573100D01* +X130124662Y-46573100D01* +X130157575Y-46516093D01* +X130191650Y-46388926D01* +X130191650Y-46257274D01* +X130157575Y-46130107D01* +X130124662Y-46073100D01* +X131041649Y-46073100D01* +X131041650Y-46073099D01* +X131041650Y-46066849D01* +X131008409Y-45856978D01* +X130942745Y-45654884D01* +X130905933Y-45582636D01* +X130885013Y-45541578D01* +X134791150Y-45541578D01* +X134791150Y-47104621D01* +X134791151Y-47104623D01* +X134806002Y-47198399D01* +X134806004Y-47198404D01* +X134863600Y-47311442D01* +X134953308Y-47401150D01* +X135066346Y-47458746D01* +X135160131Y-47473600D01* +X136423168Y-47473599D01* +X136423171Y-47473599D01* +X136423172Y-47473598D01* +X136470061Y-47466172D01* +X136516949Y-47458747D01* +X136516949Y-47458746D01* +X136516954Y-47458746D01* +X136629992Y-47401150D01* +X136719700Y-47311442D01* +X136777296Y-47198404D01* +X136792150Y-47104619D01* +X136792149Y-45541582D01* +X136792149Y-45541581D01* +X136792149Y-45541578D01* +X136792148Y-45541576D01* +X136777297Y-45447800D01* +X136777296Y-45447798D01* +X136777296Y-45447796D01* +X136719700Y-45334758D01* +X136629992Y-45245050D01* +X136516954Y-45187454D01* +X136516955Y-45187454D01* +X136423171Y-45172600D01* +X135160128Y-45172600D01* +X135160126Y-45172601D01* +X135066350Y-45187452D01* +X135066345Y-45187454D01* +X134953309Y-45245049D01* +X134863599Y-45334759D01* +X134806004Y-45447795D01* +X134791150Y-45541578D01* +X130885013Y-45541578D01* +X130846274Y-45465547D01* +X130721372Y-45293635D01* +X130571114Y-45143377D01* +X130399202Y-45018475D01* +X130209865Y-44922004D01* +X130007770Y-44856340D01* +X129941650Y-44845867D01* +X129941650Y-45890088D01* +X129884643Y-45857175D01* +X129757476Y-45823100D01* +X129625824Y-45823100D01* +X129498657Y-45857175D01* +X129441650Y-45890088D01* +X129441650Y-44845868D01* +X129441649Y-44845867D01* +X129375530Y-44856340D01* +X129375528Y-44856340D01* +X129173434Y-44922004D01* +X128984097Y-45018475D01* +X128812185Y-45143377D01* +X128661927Y-45293635D01* +X128537025Y-45465547D01* +X128440554Y-45654884D01* +X128385304Y-45824929D01* +X128349340Y-45874429D01* +X128291149Y-45893336D01* +X128232958Y-45874429D01* +X128196994Y-45824929D01* +X128192149Y-45794336D01* +X128192149Y-45541578D01* +X128192148Y-45541576D01* +X128177297Y-45447800D01* +X128177296Y-45447798D01* +X128177296Y-45447796D01* +X128119700Y-45334758D01* +X128029992Y-45245050D01* +X127916954Y-45187454D01* +X127916955Y-45187454D01* +X127823171Y-45172600D01* +X126560128Y-45172600D01* +X126560126Y-45172601D01* +X126466350Y-45187452D01* +X126466345Y-45187454D01* +X126353309Y-45245049D01* +X126263599Y-45334759D01* +X126206004Y-45447795D01* +X126191150Y-45541578D01* +X122372275Y-45541578D01* +X122346274Y-45490547D01* +X122221372Y-45318635D01* +X122071114Y-45168377D01* +X121899202Y-45043475D01* +X121709865Y-44947004D01* +X121507770Y-44881340D01* +X121441650Y-44870867D01* +X121441650Y-45918954D01* +X121374993Y-45880470D01* +X121254185Y-45848100D01* +X121129115Y-45848100D01* +X121008307Y-45880470D01* +X120941650Y-45918954D01* +X120941650Y-44870868D01* +X120941649Y-44870867D01* +X120875530Y-44881340D01* +X120875528Y-44881340D01* +X120673434Y-44947004D01* +X120484097Y-45043475D01* +X120312185Y-45168377D01* +X120161927Y-45318635D01* +X120037025Y-45490547D01* +X119940554Y-45679884D01* +X119874891Y-45881977D01* +X119861423Y-45967007D01* +X119833645Y-46021523D01* +X119779128Y-46049300D01* +X119718696Y-46039728D01* +X119675432Y-45996463D01* +X119666545Y-45970836D01* +X119653701Y-45906265D01* +X119578282Y-45724186D01* +X119468789Y-45560318D01* +X119329432Y-45420961D01* +X119219938Y-45347799D01* +X119165563Y-45311467D01* +X118983485Y-45236049D01* +X118790193Y-45197600D01* +X118790191Y-45197600D01* +X118593109Y-45197600D01* +X118593106Y-45197600D01* +X118399815Y-45236049D01* +X118399813Y-45236049D01* +X118217736Y-45311467D01* +X118053868Y-45420961D01* +X118053864Y-45420964D01* +X117914514Y-45560314D01* +X117914511Y-45560318D01* +X117805017Y-45724186D01* +X117729599Y-45906263D01* +X117729599Y-45906265D01* +X117691150Y-46099556D01* +X117192149Y-46099556D01* +X117192149Y-45566582D01* +X117192149Y-45566581D01* +X117192149Y-45566578D01* +X117192148Y-45566576D01* +X117177297Y-45472800D01* +X117177296Y-45472798D01* +X117177296Y-45472796D01* +X117119700Y-45359758D01* +X117029992Y-45270050D01* +X116916954Y-45212454D01* +X116916955Y-45212454D01* +X116823171Y-45197600D01* +X115560128Y-45197600D01* +X115560126Y-45197601D01* +X115466350Y-45212452D01* +X115466345Y-45212454D01* +X115353309Y-45270049D01* +X115263599Y-45359759D01* +X115206004Y-45472795D01* +X115191150Y-45566578D01* +X112192150Y-45566578D01* +X112192150Y-45458281D01* +X112192149Y-45458272D01* +X112185614Y-45425427D01* +X112183417Y-45414378D01* +X112150154Y-45364596D01* +X112142913Y-45359758D01* +X112100374Y-45331334D01* +X112100370Y-45331332D01* +X112056477Y-45322600D01* +X112056470Y-45322600D01* +X110326830Y-45322600D01* +X110326822Y-45322600D01* +X110282929Y-45331332D01* +X110282925Y-45331334D01* +X110233148Y-45364594D01* +X110233144Y-45364598D01* +X110199884Y-45414375D01* +X110199882Y-45414379D01* +X110191150Y-45458272D01* +X110191150Y-47125300D01* +X110172243Y-47183491D01* +X110122743Y-47219455D01* +X110092150Y-47224300D01* +X108139818Y-47224300D01* +X108081627Y-47205393D01* +X108069814Y-47195304D01* +X107547110Y-46672600D01* +X106985247Y-46110736D01* +X106985245Y-46110735D01* +X106985244Y-46110734D01* +X106893179Y-46072600D01* +X106893178Y-46072600D01* +X106768034Y-46072600D01* +X106709843Y-46053693D01* +X106673879Y-46004193D01* +X106670938Y-45992922D01* +X106653701Y-45906265D01* +X106578282Y-45724186D01* +X106468789Y-45560318D01* +X106329432Y-45420961D01* +X106219938Y-45347799D01* +X106165563Y-45311467D01* +X105983485Y-45236049D01* +X105790193Y-45197600D01* +X105790191Y-45197600D01* +X105593109Y-45197600D01* +X105593106Y-45197600D01* +X105399815Y-45236049D01* +X105399813Y-45236049D01* +X105217736Y-45311467D01* +X105053868Y-45420961D01* +X105053864Y-45420964D01* +X104914514Y-45560314D01* +X104914511Y-45560318D01* +X104805017Y-45724186D01* +X104729599Y-45906263D01* +X104729599Y-45906265D01* +X104691150Y-46099556D01* +X104192149Y-46099556D01* +X104153701Y-45906265D01* +X104078282Y-45724186D01* +X103968789Y-45560318D01* +X103829432Y-45420961D01* +X103719938Y-45347799D01* +X103665563Y-45311467D01* +X103483485Y-45236049D01* +X103290193Y-45197600D01* +X103290191Y-45197600D01* +X103093109Y-45197600D01* +X103093106Y-45197600D01* +X102899815Y-45236049D01* +X102899813Y-45236049D01* +X102717736Y-45311467D01* +X102553868Y-45420961D01* +X102553864Y-45420964D01* +X102414514Y-45560314D01* +X102414511Y-45560318D01* +X102305017Y-45724186D01* +X102229599Y-45906263D01* +X102216755Y-45970834D01* +X102186857Y-46024218D01* +X102131292Y-46049833D01* +X102071283Y-46037896D01* +X102029750Y-45992965D01* +X102021876Y-45967006D01* +X102008409Y-45881978D01* +X101942745Y-45679884D01* +X101846274Y-45490547D01* +X101721372Y-45318635D01* +X101571114Y-45168377D01* +X101399202Y-45043475D01* +X101209865Y-44947004D01* +X101007770Y-44881340D01* +X100941650Y-44870867D01* +X100941650Y-45918954D01* +X100874993Y-45880470D01* +X100754185Y-45848100D01* +X100629115Y-45848100D01* +X100508307Y-45880470D01* +X100441650Y-45918954D01* +X100441650Y-44870868D01* +X100441649Y-44870867D01* +X100375530Y-44881340D01* +X100375528Y-44881340D01* +X100173434Y-44947004D01* +X99984097Y-45043475D01* +X99812185Y-45168377D01* +X99661927Y-45318635D01* +X99537025Y-45490547D01* +X99440554Y-45679884D01* +X99385304Y-45849929D01* +X99349340Y-45899429D01* +X99291149Y-45918336D01* +X99232958Y-45899429D01* +X99196994Y-45849929D01* +X99192149Y-45819336D01* +X99192149Y-45566578D01* +X99192148Y-45566576D01* +X99177297Y-45472800D01* +X99177296Y-45472798D01* +X99177296Y-45472796D01* +X99119700Y-45359758D01* +X99029992Y-45270050D01* +X98916954Y-45212454D01* +X98916955Y-45212454D01* +X98823171Y-45197600D01* +X97560128Y-45197600D01* +X97560126Y-45197601D01* +X97466350Y-45212452D01* +X97466345Y-45212454D01* +X97353309Y-45270049D01* +X97263599Y-45359759D01* +X97206004Y-45472795D01* +X97191150Y-45566578D01* +X97191150Y-45973600D01* +X97172243Y-46031791D01* +X97122743Y-46067755D01* +X97092150Y-46072600D01* +X95011959Y-46072600D01* +X94953768Y-46053693D01* +X94941961Y-46043609D01* +X94860963Y-45962611D01* +X94860960Y-45962609D01* +X94860958Y-45962607D01* +X94758239Y-45903302D01* +X94758240Y-45903302D01* +X94721046Y-45893336D01* +X94643659Y-45872600D01* +X94525041Y-45872600D01* +X94470188Y-45887298D01* +X94410459Y-45903302D01* +X94307741Y-45962607D01* +X94223857Y-46046491D01* +X94164552Y-46149209D01* +X94148853Y-46207800D01* +X94133850Y-46263791D01* +X86785315Y-46263791D01* +X86854874Y-46143312D01* +X86854878Y-46143304D01* +X86893815Y-46049300D01* +X86947704Y-45919200D01* +X87010488Y-45684889D01* +X87042150Y-45444388D01* +X87042150Y-45201812D01* +X87010488Y-44961311D01* +X86947704Y-44727000D01* +X86883957Y-44573100D01* +X86854876Y-44502891D01* +X86854873Y-44502886D01* +X86749342Y-44320101D01* +X86749341Y-44320100D01* +X86733586Y-44292811D01* +X86718470Y-44273112D01* +X153391650Y-44273112D01* +X153391650Y-45573099D01* +X153391651Y-45573100D01* +X154441649Y-45573100D01* +X154441650Y-45573099D01* +X154441650Y-43573101D01* +X154941650Y-43573101D01* +X154941650Y-45573099D01* +X154941651Y-45573100D01* +X155991648Y-45573100D01* +X155991649Y-45573099D01* +X155991649Y-45037464D01* +X167041150Y-45037464D01* +X167041150Y-45608736D01* +X167048375Y-45658325D01* +X167051784Y-45681726D01* +X167078844Y-45737078D01* +X167106824Y-45794311D01* +X167195439Y-45882926D01* +X167308025Y-45937966D01* +X167381014Y-45948600D01* +X167381017Y-45948600D01* +X167845250Y-45948600D01* +X167903441Y-45967507D01* +X167939405Y-46017007D01* +X167944250Y-46047600D01* +X167944250Y-46135509D01* +X167963621Y-46207802D01* +X167974952Y-46250090D01* +X168034257Y-46352808D01* +X168034259Y-46352810D01* +X168034261Y-46352813D01* +X168118137Y-46436689D01* +X168118139Y-46436690D01* +X168118141Y-46436692D01* +X168220860Y-46495997D01* +X168220861Y-46495997D01* +X168220864Y-46495999D01* +X168335441Y-46526700D01* +X168335443Y-46526700D01* +X168454057Y-46526700D01* +X168454059Y-46526700D01* +X168568636Y-46495999D01* +X168568638Y-46495997D01* +X168568640Y-46495997D01* +X168671358Y-46436692D01* +X168671358Y-46436691D01* +X168671363Y-46436689D01* +X168755239Y-46352813D01* +X168772567Y-46322800D01* +X168814547Y-46250090D01* +X168814547Y-46250088D01* +X168814549Y-46250086D01* +X168845250Y-46135509D01* +X168845250Y-46047600D01* +X168850095Y-46032688D01* +X168850095Y-46017007D01* +X168859311Y-46004321D01* +X168864157Y-45989409D01* +X168876842Y-45980192D01* +X168886059Y-45967507D01* +X168900971Y-45962661D01* +X168913657Y-45953445D01* +X168944250Y-45948600D01* +X168992151Y-45948600D01* +X169011461Y-45950501D01* +X169127581Y-45973599D01* +X169127582Y-45973599D01* +X169255718Y-45973599D01* +X169255719Y-45973599D01* +X169371838Y-45950501D01* +X169391149Y-45948600D01* +X169452282Y-45948600D01* +X169452286Y-45948600D01* +X169525275Y-45937966D01* +X169637861Y-45882926D01* +X169726476Y-45794311D01* +X169781516Y-45681725D01* +X169781647Y-45680823D01* +X169782039Y-45680028D01* +X169783784Y-45674383D01* +X169784689Y-45674662D01* +X169808740Y-45625966D01* +X169809610Y-45625085D01* +X170637001Y-44797696D01* +X170691517Y-44769919D01* +X170707004Y-44768700D01* +X172429504Y-44768700D01* +X172433698Y-44770062D01* +X172437993Y-44769065D01* +X172462440Y-44779401D01* +X172487695Y-44787607D01* +X172490287Y-44791175D01* +X172494348Y-44792892D01* +X172508049Y-44815622D01* +X172523659Y-44837107D01* +X172523659Y-44841518D01* +X172525935Y-44845294D01* +X172523659Y-44865314D01* +X172523659Y-44898293D01* +X172520688Y-44906254D01* +X172519631Y-44908753D01* +X172501077Y-44946707D01* +X172499758Y-44955755D01* +X172494809Y-44967461D01* +X172490234Y-44972737D01* +X172485942Y-44983907D01* +X172465184Y-45014974D01* +X172416150Y-45133352D01* +X172416150Y-45133354D01* +X172416149Y-45133356D01* +X172408144Y-45173600D01* +X172391150Y-45259030D01* +X172391150Y-45519871D01* +X172411791Y-45623637D01* +X172411790Y-45623637D01* +X172416146Y-45645536D01* +X172416148Y-45645542D01* +X172465184Y-45763926D01* +X172534854Y-45868196D01* +X172536373Y-45870469D01* +X173858881Y-47192977D01* +X173962835Y-47262436D01* +X173962836Y-47262437D01* +X173965416Y-47264161D01* +X173965420Y-47264163D01* +X173965423Y-47264165D01* +X174083806Y-47313201D01* +X174209481Y-47338200D01* +X174337619Y-47338200D01* +X175144971Y-47338200D01* +X175203162Y-47357107D01* +X175239126Y-47406607D01* +X175239126Y-47467793D01* +X175233911Y-47480681D01* +X175226078Y-47496703D01* +X175226077Y-47496705D01* +X175226077Y-47496707D01* +X175219856Y-47539408D01* +X175216150Y-47564843D01* +X175216150Y-48028330D01* +X175197243Y-48086521D01* +X175187154Y-48098334D01* +X173836253Y-49449236D01* +X173821024Y-49464465D01* +X173766507Y-49492242D01* +X173706075Y-49482671D01* +X173681019Y-49464467D01* +X173648763Y-49432211D01* +X173648760Y-49432209D01* +X173648758Y-49432207D01* +X173546039Y-49372902D01* +X173546040Y-49372902D01* +X173532501Y-49369274D01* +X173431459Y-49342200D01* +X173312841Y-49342200D01* +X173242717Y-49360989D01* +X173198259Y-49372902D01* +X173095541Y-49432207D01* +X173095540Y-49432208D01* +X173095537Y-49432210D01* +X173095537Y-49432211D01* +X173014542Y-49513205D01* +X173007427Y-49516830D01* +X173002732Y-49523293D01* +X172980683Y-49530456D01* +X172960028Y-49540981D01* +X172944541Y-49542200D01* +X172783409Y-49542200D01* +X172783401Y-49542199D01* +X172771878Y-49542199D01* +X172672223Y-49542199D01* +X172672222Y-49542199D01* +X172632658Y-49558586D01* +X172632659Y-49558587D01* +X172580153Y-49580335D01* +X172509685Y-49650802D01* +X172509686Y-49650803D01* +X172509685Y-49650804D01* +X172509684Y-49650804D01* +X171816882Y-50343604D01* +X171762366Y-50371381D01* +X171746879Y-50372600D01* +X170821789Y-50372600D01* +X170821786Y-50372601D01* +X170796659Y-50375514D01* +X170693885Y-50420894D01* +X170614444Y-50500335D01* +X170569064Y-50603111D01* +X170566150Y-50628230D01* +X170566150Y-51017960D01* +X170566151Y-51017963D01* +X170569064Y-51043090D01* +X170576198Y-51059246D01* +X170614444Y-51145865D01* +X170693885Y-51225306D01* +X170796659Y-51270685D01* +X170821785Y-51273600D01* +X172322182Y-51273599D01* +X172380373Y-51292506D01* +X172416337Y-51342006D01* +X172416337Y-51403192D01* +X172392186Y-51442601D01* +X172221183Y-51613604D01* +X172166668Y-51641381D01* +X172151181Y-51642600D01* +X170821789Y-51642600D01* +X170821786Y-51642601D01* +X170796659Y-51645514D01* +X170693885Y-51690894D01* +X170614444Y-51770335D01* +X170569064Y-51873111D01* +X170566150Y-51898230D01* +X170566150Y-52287960D01* +X170566151Y-52287963D01* +X170569064Y-52313090D01* +X170590884Y-52362507D01* +X170614444Y-52415865D01* +X170693885Y-52495306D01* +X170796659Y-52540685D01* +X170821785Y-52543600D01* +X172561514Y-52543599D01* +X172586641Y-52540685D01* +X172689415Y-52495306D01* +X172768856Y-52415865D01* +X172814235Y-52313091D01* +X172817150Y-52287965D01* +X172817149Y-51898236D01* +X172814235Y-51873109D01* +X172797509Y-51835230D01* +X172791301Y-51774362D01* +X172818068Y-51725240D01* +X174120045Y-50423264D01* +X174120047Y-50423264D01* +X174190514Y-50352797D01* +X174213289Y-50297813D01* +X174228651Y-50260728D01* +X174228651Y-50161072D01* +X174228650Y-50161069D01* +X174228650Y-49806369D01* +X174247557Y-49748178D01* +X174257646Y-49736365D01* +X175616415Y-48377596D01* +X175670932Y-48349819D01* +X175686419Y-48348600D01* +X176149907Y-48348600D01* +X176149910Y-48348600D01* +X176218043Y-48338673D01* +X176323133Y-48287298D01* +X176405848Y-48204583D01* +X176457223Y-48099493D01* +X176467150Y-48031360D01* +X176467150Y-47809354D01* +X176486057Y-47751163D01* +X176535557Y-47715199D01* +X176596743Y-47715199D01* +X176636154Y-47739350D01* +X178112154Y-49215350D01* +X178139931Y-49269867D01* +X178141150Y-49285354D01* +X178141150Y-51729620D01* +X178141151Y-51729623D01* +X178156002Y-51823399D01* +X178156004Y-51823404D01* +X178213600Y-51936442D01* +X178303308Y-52026150D01* +X178416346Y-52083746D01* +X178510131Y-52098600D01* +X179073168Y-52098599D01* +X179073170Y-52098599D01* +X179073171Y-52098598D01* +X179120061Y-52091172D01* +X179166949Y-52083747D01* +X179166949Y-52083746D01* +X179166954Y-52083746D01* +X179279992Y-52026150D01* +X179369700Y-51936442D01* +X179427296Y-51823404D01* +X179439225Y-51748086D01* +X179442150Y-51729621D01* +X179442150Y-50584700D01* +X179461057Y-50526509D01* +X179510557Y-50490545D01* +X179541150Y-50485700D01* +X179603722Y-50485700D01* +X179661913Y-50504607D01* +X179697877Y-50554107D01* +X179702209Y-50594762D01* +X179691650Y-50698112D01* +X179691650Y-50973099D01* +X179691651Y-50973100D01* +X180441649Y-50973100D01* +X180441650Y-50973099D01* +X180441650Y-50031431D01* +X180326885Y-49998101D01* +X180941650Y-49998101D01* +X180941650Y-50973099D01* +X180941651Y-50973100D01* +X181691648Y-50973100D01* +X181691649Y-50973099D01* +X181691649Y-50698113D01* +X181681157Y-50595412D01* +X181681154Y-50595400D01* +X181626006Y-50428975D01* +X181533969Y-50279759D01* +X181409990Y-50155780D01* +X181260774Y-50063743D01* +X181094343Y-50008593D01* +X180991637Y-49998100D01* +X180941651Y-49998100D01* +X180941650Y-49998101D01* +X180326885Y-49998101D01* +X180325239Y-49997623D01* +X180315090Y-49990727D01* +X180303100Y-49988142D01* +X180290393Y-49973946D01* +X180274630Y-49963236D01* +X180270472Y-49951692D01* +X180262292Y-49942553D01* +X180255370Y-49909756D01* +X180253899Y-49905670D01* +X180254251Y-49904455D01* +X180253850Y-49902551D01* +X180253850Y-49771132D01* +X180253850Y-49771131D01* +X180228851Y-49645456D01* +X180179815Y-49527073D01* +X180179813Y-49527070D01* +X180179811Y-49527066D01* +X180144185Y-49473749D01* +X180108626Y-49420531D01* +X180018019Y-49329924D01* +X179975576Y-49301565D01* +X179911483Y-49258738D01* +X179911475Y-49258734D01* +X179793097Y-49209700D01* +X179793095Y-49209699D01* +X179793094Y-49209699D01* +X179667419Y-49184700D01* +X179541150Y-49184700D01* +X179482959Y-49165793D01* +X179446995Y-49116293D01* +X179442150Y-49085700D01* +X179442150Y-48910832D01* +X179442150Y-48910831D01* +X179417151Y-48785156D01* +X179368115Y-48666773D01* +X179368114Y-48666770D01* +X179353024Y-48644186D01* +X179353024Y-48644187D01* +X179296926Y-48560230D01* +X177634903Y-46898207D01* +X177607126Y-46843690D01* +X177616697Y-46783258D01* +X177659962Y-46739993D01* +X177679275Y-46732579D01* +X177719136Y-46721899D01* +X177821863Y-46662589D01* +X177905739Y-46578713D01* +X177941893Y-46516093D01* +X177965047Y-46475990D01* +X177965047Y-46475988D01* +X177965049Y-46475986D01* +X177993052Y-46371474D01* +X178026376Y-46320161D01* +X178083498Y-46298235D01* +X178088679Y-46298099D01* +X178173216Y-46298099D01* +X178173232Y-46298098D01* +X178243753Y-46291691D01* +X178243759Y-46291689D01* +X178406042Y-46241120D01* +X178406050Y-46241117D01* +X178551522Y-46153175D01* +X178671725Y-46032972D01* +X178759667Y-45887500D01* +X178759670Y-45887492D01* +X178810239Y-45725210D01* +X178810241Y-45725204D01* +X178816649Y-45654681D01* +X178816649Y-45589154D01* +X178835555Y-45530963D01* +X178885055Y-45494999D01* +X178946240Y-45494998D01* +X178985653Y-45519149D01* +X182212154Y-48745650D01* +X182239931Y-48800167D01* +X182241150Y-48815654D01* +X182241150Y-49403746D01* +X182222243Y-49461937D01* +X182212154Y-49473749D01* +X182121970Y-49563933D01* +X182067502Y-49645454D01* +X182067501Y-49645456D01* +X182050784Y-49670473D01* +X182001750Y-49788852D01* +X182001749Y-49788855D01* +X182001749Y-49788856D01* +X181994529Y-49825151D01* +X181976750Y-49914530D01* +X181976750Y-51059246D01* +X181957843Y-51117437D01* +X181947754Y-51129250D01* +X181632900Y-51444104D01* +X181578383Y-51471881D01* +X181562896Y-51473100D01* +X179691652Y-51473100D01* +X179691651Y-51473101D01* +X179691651Y-51748086D01* +X179702142Y-51850787D01* +X179702145Y-51850799D01* +X179757293Y-52017224D01* +X179849330Y-52166440D01* +X179973309Y-52290419D01* +X180122525Y-52382456D01* +X180288956Y-52437606D01* +X180391665Y-52448100D01* +X180394179Y-52448228D01* +X180394172Y-52448356D01* +X180394179Y-52448357D01* +X180394165Y-52448484D01* +X180394113Y-52449506D01* +X180447978Y-52466928D01* +X180484008Y-52516380D01* +X180484091Y-52577565D01* +X180459899Y-52617103D01* +X178326900Y-54750104D01* +X178272383Y-54777881D01* +X178256896Y-54779100D01* +X176891118Y-54779100D01* +X176832927Y-54760193D01* +X176796963Y-54710693D01* +X176796963Y-54649507D01* +X176797143Y-54648959D01* +X176806506Y-54620701D01* +X176816650Y-54521423D01* +X176816650Y-54498101D01* +X176816649Y-54498100D01* +X174866652Y-54498100D01* +X174866651Y-54498101D01* +X174866651Y-54521422D01* +X174876792Y-54620697D01* +X174876794Y-54620705D01* +X174886157Y-54648959D01* +X174886513Y-54710143D01* +X174850839Y-54759852D01* +X174792759Y-54779098D01* +X174792182Y-54779100D01* +X172916150Y-54779100D01* +X172857959Y-54760193D01* +X172821995Y-54710693D01* +X172817150Y-54680100D01* +X172817149Y-54438240D01* +X172817149Y-54438239D01* +X172817149Y-54438236D01* +X172814235Y-54413109D01* +X172768856Y-54310335D01* +X172689415Y-54230894D01* +X172586641Y-54185515D01* +X172586640Y-54185514D01* +X172586638Y-54185514D01* +X172561519Y-54182600D01* +X172561515Y-54182600D01* +X172202103Y-54182600D01* +X172143912Y-54163693D01* +X172143200Y-54163170D01* +X172137290Y-54158795D01* +X172106319Y-54127824D01* +X171999777Y-54056635D01* +X171881394Y-54007599D01* +X171878397Y-54007002D01* +X171871016Y-54003911D01* +X171851478Y-53987089D01* +X171833812Y-53974776D01* +X174866650Y-53974776D01* +X174866650Y-53998099D01* +X174866651Y-53998100D01* +X176816648Y-53998100D01* +X176816649Y-53998099D01* +X176816649Y-53974777D01* +X176806507Y-53875502D01* +X176806504Y-53875490D01* +X176753195Y-53714612D01* +X176664224Y-53570370D01* +X176544379Y-53450525D01* +X176400137Y-53361554D01* +X176390325Y-53358303D01* +X176341035Y-53322051D01* +X176322467Y-53263751D01* +X176341713Y-53205672D01* +X176351455Y-53194331D01* +X176401476Y-53144311D01* +X176456516Y-53031725D01* +X176467150Y-52958736D01* +X176467150Y-52437464D01* +X176456516Y-52364475D01* +X176401476Y-52251889D01* +X176312861Y-52163274D01* +X176200275Y-52108234D01* +X176200271Y-52108233D01* +X176176875Y-52104824D01* +X176122019Y-52077724D01* +X176093568Y-52023556D01* +X176092150Y-52006859D01* +X176092150Y-50092636D01* +X176111057Y-50034445D01* +X176160557Y-49998481D01* +X176176866Y-49994672D01* +X176218043Y-49988673D01* +X176323133Y-49937298D01* +X176405848Y-49854583D01* +X176457223Y-49749493D01* +X176467150Y-49681360D01* +X176467150Y-49214840D01* +X176457223Y-49146707D01* +X176405848Y-49041617D01* +X176323133Y-48958902D01* +X176323131Y-48958901D01* +X176218045Y-48907527D01* +X176190789Y-48903556D01* +X176149910Y-48897600D01* +X175533390Y-48897600D01* +X175499323Y-48902563D01* +X175465254Y-48907527D01* +X175360168Y-48958901D01* +X175277451Y-49041618D01* +X175226077Y-49146704D01* +X175226077Y-49146707D01* +X175216150Y-49214840D01* +X175216150Y-49681360D01* +X175222768Y-49726782D01* +X175226077Y-49749495D01* +X175277451Y-49854581D01* +X175277452Y-49854583D01* +X175360167Y-49937298D01* +X175389611Y-49951692D01* +X175465254Y-49988672D01* +X175465255Y-49988672D01* +X175465257Y-49988673D01* +X175506425Y-49994671D01* +X175561280Y-50021769D01* +X175589731Y-50075937D01* +X175591150Y-50092636D01* +X175591150Y-52006859D01* +X175572243Y-52065050D01* +X175522743Y-52101014D01* +X175506425Y-52104824D01* +X175483028Y-52108233D01* +X175483024Y-52108234D01* +X175370440Y-52163273D01* +X175281823Y-52251890D01* +X175226784Y-52364473D01* +X175226784Y-52364475D01* +X175216150Y-52437464D01* +X175216150Y-52958736D01* +X175223153Y-53006800D01* +X175226784Y-53031726D01* +X175271699Y-53123600D01* +X175281824Y-53144311D01* +X175331839Y-53194326D01* +X175359615Y-53248841D01* +X175350044Y-53309273D01* +X175306779Y-53352538D01* +X175292976Y-53358302D01* +X175283164Y-53361553D01* +X175283163Y-53361553D01* +X175138920Y-53450525D01* +X175019075Y-53570370D01* +X174930104Y-53714612D01* +X174876793Y-53875496D01* +X174866650Y-53974776D01* +X171833812Y-53974776D01* +X171830329Y-53972348D01* +X171828614Y-53967404D01* +X171824649Y-53963990D01* +X171818730Y-53938896D01* +X171810285Y-53914539D01* +X171811804Y-53909531D01* +X171810603Y-53904438D01* +X171820562Y-53880662D01* +X171828048Y-53855989D01* +X171832221Y-53852830D01* +X171834243Y-53848004D01* +X171856276Y-53834622D01* +X171876834Y-53819062D01* +X171883840Y-53817881D01* +X171886539Y-53816243D01* +X171891254Y-53816633D01* +X171909263Y-53813599D01* +X172561514Y-53813599D01* +X172586641Y-53810685D01* +X172689415Y-53765306D01* +X172768856Y-53685865D01* +X172782126Y-53655810D01* +X172799330Y-53636584D01* +X172814499Y-53615707D01* +X172819452Y-53614097D01* +X172822926Y-53610216D01* +X172872690Y-53596800D01* +X172979041Y-53596800D01* +X173037232Y-53615707D01* +X173049038Y-53625790D01* +X173130037Y-53706789D01* +X173130039Y-53706790D01* +X173130041Y-53706792D01* +X173232760Y-53766097D01* +X173232761Y-53766097D01* +X173232764Y-53766099D01* +X173347341Y-53796800D01* +X173347343Y-53796800D01* +X173465957Y-53796800D01* +X173465959Y-53796800D01* +X173580536Y-53766099D01* +X173580538Y-53766097D01* +X173580540Y-53766097D01* +X173683258Y-53706792D01* +X173683258Y-53706791D01* +X173683263Y-53706789D01* +X173767139Y-53622913D01* +X173767142Y-53622908D01* +X173826447Y-53520190D01* +X173826447Y-53520188D01* +X173826449Y-53520186D01* +X173857150Y-53405609D01* +X173857150Y-53286991D01* +X173826449Y-53172414D01* +X173826447Y-53172411D01* +X173826447Y-53172409D01* +X173767142Y-53069691D01* +X173767140Y-53069689D01* +X173767139Y-53069687D01* +X173683263Y-52985811D01* +X173683260Y-52985809D01* +X173683258Y-52985807D01* +X173580539Y-52926502D01* +X173580540Y-52926502D01* +X173567001Y-52922874D01* +X173465959Y-52895800D01* +X173347341Y-52895800D01* +X173277217Y-52914589D01* +X173232759Y-52926502D01* +X173130041Y-52985807D01* +X173130040Y-52985808D01* +X173130037Y-52985810D01* +X173130037Y-52985811D01* +X173049042Y-53066805D01* +X173041927Y-53070430D01* +X173037232Y-53076893D01* +X173015183Y-53084056D01* +X172994528Y-53094581D01* +X172979041Y-53095800D01* +X172857854Y-53095800D01* +X172799663Y-53076893D01* +X172775471Y-53046922D01* +X172774040Y-53047903D01* +X172768857Y-53040337D01* +X172768856Y-53040336D01* +X172768856Y-53040335D01* +X172689415Y-52960894D01* +X172586641Y-52915515D01* +X172586640Y-52915514D01* +X172586638Y-52915514D01* +X172561518Y-52912600D01* +X170821789Y-52912600D01* +X170821786Y-52912601D01* +X170796659Y-52915514D01* +X170693885Y-52960894D01* +X170614444Y-53040335D01* +X170569064Y-53143111D01* +X170566150Y-53168230D01* +X170566150Y-53557960D01* +X170566151Y-53557963D01* +X170569064Y-53583090D01* +X170576625Y-53600213D01* +X170614444Y-53685865D01* +X170693885Y-53765306D01* +X170796659Y-53810685D01* +X170821785Y-53813600D01* +X171474033Y-53813599D01* +X171532223Y-53832506D01* +X171568187Y-53882006D01* +X171568187Y-53943192D01* +X171532223Y-53992692D01* +X171506328Y-54005568D01* +X171506399Y-54005738D01* +X171503941Y-54006756D01* +X171502783Y-54007332D01* +X171501914Y-54007595D01* +X171383524Y-54056634D01* +X171383516Y-54056638D01* +X171300509Y-54112102D01* +X171276981Y-54127824D01* +X171276979Y-54127825D01* +X171272938Y-54130526D01* +X171271849Y-54128896D01* +X171222182Y-54148329D01* +X171216365Y-54148500D01* +X170812480Y-54148500D01* +X170749643Y-54160999D01* +X170686806Y-54173499D01* +X170686805Y-54173499D01* +X170686802Y-54173500D01* +X170578331Y-54218431D01* +X170578330Y-54218431D01* +X170568425Y-54222533D01* +X170461884Y-54293720D01* +X169807670Y-54947934D01* +X169736483Y-55054475D01* +X169687449Y-55172854D01* +X169687449Y-55172856D01* +X169662451Y-55298528D01* +X169662451Y-55426671D01* +X169672760Y-55478496D01* +X169686179Y-55545961D01* +X169687449Y-55552343D01* +X169687449Y-55552345D01* +X169736483Y-55670724D01* +X169807188Y-55776544D01* +X169807673Y-55777269D01* +X169898281Y-55867877D01* +X170004823Y-55939065D01* +X170123206Y-55988101D01* +X170248881Y-56013099D01* +X170248882Y-56013099D01* +X170377018Y-56013099D01* +X170377019Y-56013099D01* +X170502694Y-55988101D01* +X170621077Y-55939065D01* +X170727619Y-55867877D01* +X170999305Y-55596191D01* +X171117001Y-55478496D01* +X171124117Y-55474870D01* +X171128813Y-55468407D01* +X171150862Y-55461242D01* +X171171517Y-55450719D01* +X171187004Y-55449500D01* +X171381196Y-55449500D01* +X171439387Y-55468407D01* +X171451199Y-55478496D01* +X171687010Y-55714306D01* +X171907581Y-55934877D01* +X171987238Y-55988101D01* +X172003338Y-55998859D01* +X172014119Y-56006063D01* +X172014121Y-56006064D01* +X172014123Y-56006065D01* +X172132506Y-56055101D01* +X172258181Y-56080100D01* +X172258182Y-56080100D01* +X178631418Y-56080100D01* +X178631419Y-56080100D01* +X178757094Y-56055101D01* +X178875477Y-56006065D01* +X178902362Y-55988101D01* +X178982019Y-55934877D01* +X183104061Y-51812834D01* +X183158574Y-51785060D01* +X183219006Y-51794631D01* +X183259796Y-51833339D01* +X183284261Y-51875713D01* +X183368137Y-51959589D01* +X183368139Y-51959590D01* +X183368141Y-51959592D01* +X183470860Y-52018897D01* +X183470861Y-52018897D01* +X183470864Y-52018899D01* +X183585441Y-52049600D01* +X183585443Y-52049600D01* +X183704057Y-52049600D01* +X183704059Y-52049600D01* +X183818636Y-52018899D01* +X183818638Y-52018897D01* +X183818640Y-52018897D01* +X183921358Y-51959592D01* +X183921358Y-51959591D01* +X183921363Y-51959589D01* +X184002357Y-51878594D01* +X184056872Y-51850819D01* +X184072359Y-51849600D01* +X202202979Y-51849600D01* +X202291732Y-51812837D01* +X202295047Y-51811464D01* +X205128914Y-48977595D01* +X205183431Y-48949819D01* +X205198918Y-48948600D01* +X205662407Y-48948600D01* +X205662410Y-48948600D01* +X205730543Y-48938673D01* +X205835633Y-48887298D01* +X205918348Y-48804583D01* +X205969723Y-48699493D01* +X205979650Y-48631360D01* +X205979650Y-48014840D01* +X206528650Y-48014840D01* +X206528650Y-48631360D01* +X206530519Y-48644186D01* +X206538577Y-48699495D01* +X206587515Y-48799599D01* +X206589952Y-48804583D01* +X206672667Y-48887298D01* +X206720803Y-48910830D01* +X206777754Y-48938672D01* +X206777755Y-48938672D01* +X206777757Y-48938673D01* +X206845890Y-48948600D01* +X206845893Y-48948600D01* +X207312407Y-48948600D01* +X207312410Y-48948600D01* +X207380543Y-48938673D01* +X207485633Y-48887298D01* +X207568348Y-48804583D01* +X207619723Y-48699493D01* +X207629650Y-48631360D01* +X207629650Y-48014840D01* +X207619723Y-47946707D01* +X207615028Y-47937104D01* +X207568348Y-47841618D01* +X207568348Y-47841617D01* +X207485633Y-47758902D01* +X207385169Y-47709788D01* +X207341196Y-47667246D01* +X207329650Y-47620848D01* +X207329650Y-45272600D01* +X207348557Y-45214409D01* +X207365898Y-45201810D01* +X209341150Y-45201810D01* +X209341150Y-45444389D01* +X209344041Y-45466350D01* +X209372395Y-45681725D01* +X209372811Y-45684881D01* +X209372811Y-45684886D01* +X209393990Y-45763926D01* +X209435364Y-45918336D01* +X209435594Y-45919192D01* +X209435598Y-45919205D01* +X209528422Y-46143304D01* +X209528424Y-46143308D01* +X209528426Y-46143312D01* +X209649714Y-46353389D01* +X209649716Y-46353392D01* +X209797379Y-46545831D01* +X209797381Y-46545833D01* +X209797385Y-46545838D01* +X209968912Y-46717365D01* +X209968916Y-46717368D01* +X209968918Y-46717370D01* +X210071746Y-46796272D01* +X210161361Y-46865036D01* +X210371438Y-46986324D01* +X210595550Y-47079154D01* +X210829861Y-47141938D01* +X211070362Y-47173600D01* +X211070363Y-47173600D01* +X211312937Y-47173600D01* +X211312938Y-47173600D01* +X211553439Y-47141938D01* +X211787750Y-47079154D01* +X212011862Y-46986324D01* +X212221939Y-46865036D01* +X212414388Y-46717365D01* +X212585915Y-46545838D01* +X212733586Y-46353389D01* +X212854874Y-46143312D01* +X212947704Y-45919200D01* +X213010488Y-45684889D01* +X213042150Y-45444388D01* +X213042150Y-45201812D01* +X213010488Y-44961311D01* +X212947704Y-44727000D01* +X212854874Y-44502888D01* +X212733586Y-44292811D01* +X212718471Y-44273113D01* +X212585920Y-44100368D01* +X212585918Y-44100366D01* +X212585915Y-44100362D01* +X212414388Y-43928835D01* +X212414383Y-43928831D01* +X212414381Y-43928829D01* +X212221942Y-43781166D01* +X212156706Y-43743502D01* +X212011862Y-43659876D01* +X212011858Y-43659874D01* +X212011854Y-43659872D01* +X211787755Y-43567048D01* +X211787754Y-43567047D01* +X211787750Y-43567046D01* +X211553439Y-43504262D01* +X211553436Y-43504261D01* +X211553434Y-43504261D01* +X211312939Y-43472600D01* +X211312938Y-43472600D01* +X211070362Y-43472600D01* +X211070360Y-43472600D01* +X210829868Y-43504261D01* +X210829863Y-43504261D01* +X210595557Y-43567044D01* +X210595544Y-43567048D01* +X210371445Y-43659872D01* +X210161357Y-43781166D01* +X209968918Y-43928829D01* +X209797379Y-44100368D01* +X209649716Y-44292807D01* +X209528422Y-44502895D01* +X209435598Y-44726994D01* +X209435594Y-44727007D01* +X209372811Y-44961313D01* +X209372811Y-44961318D01* +X209341150Y-45201810D01* +X207365898Y-45201810D01* +X207398057Y-45178445D01* +X207428650Y-45173600D01* +X207466429Y-45173600D01* +X207493281Y-45169346D01* +X207558748Y-45158978D01* +X207558754Y-45158975D01* +X207654157Y-45110365D01* +X207654162Y-45110362D01* +X207660343Y-45107212D01* +X207670023Y-45102280D01* +X207758330Y-45013973D01* +X207815028Y-44902698D01* +X207826714Y-44828916D01* +X207829650Y-44810378D01* +X207829650Y-43835821D01* +X207820993Y-43781164D01* +X207815028Y-43743502D01* +X207758330Y-43632227D01* +X207670023Y-43543920D01* +X207670020Y-43543918D01* +X207670021Y-43543918D01* +X207558751Y-43487223D01* +X207558748Y-43487222D01* +X207535667Y-43483566D01* +X207466429Y-43472600D01* +X207466426Y-43472600D01* +X206916874Y-43472600D01* +X206916871Y-43472600D01* +X206824552Y-43487222D01* +X206824548Y-43487223D01* +X206713279Y-43543918D01* +X206624968Y-43632229D01* +X206568273Y-43743498D01* +X206568272Y-43743502D01* +X206553650Y-43835821D01* +X206553650Y-44810378D01* +X206560225Y-44851889D01* +X206567543Y-44898098D01* +X206568272Y-44902697D01* +X206568273Y-44902701D01* +X206624968Y-45013970D01* +X206624970Y-45013973D01* +X206713277Y-45102280D01* +X206713279Y-45102281D01* +X206713281Y-45102282D01* +X206774595Y-45133524D01* +X206817860Y-45176788D01* +X206828650Y-45221733D01* +X206828650Y-47620848D01* +X206809743Y-47679039D01* +X206773130Y-47709789D01* +X206672668Y-47758901D01* +X206589951Y-47841618D01* +X206538577Y-47946704D01* +X206538577Y-47946707D01* +X206528650Y-48014840D01* +X205979650Y-48014840D01* +X205969723Y-47946707D01* +X205965028Y-47937104D01* +X205918348Y-47841618D01* +X205918348Y-47841617D01* +X205835633Y-47758902D01* +X205805574Y-47744207D01* +X205730545Y-47707527D01* +X205699417Y-47702992D01* +X205662410Y-47697600D01* +X205195890Y-47697600D01* +X205161823Y-47702563D01* +X205127754Y-47707527D01* +X205022668Y-47758901D01* +X204939951Y-47841618D01* +X204888577Y-47946704D01* +X204888577Y-47946707D01* +X204879146Y-48011440D01* +X204878650Y-48014843D01* +X204878650Y-48478331D01* +X204859743Y-48536522D01* +X204849654Y-48548335D01* +X202078385Y-51319604D01* +X202023868Y-51347381D01* +X202008381Y-51348600D01* +X191352918Y-51348600D01* +X191294727Y-51329693D01* +X191258763Y-51280193D01* +X191258763Y-51219007D01* +X191282912Y-51179598D01* +X193484915Y-48977596D01* +X193539432Y-48949819D01* +X193554919Y-48948600D01* +X193662407Y-48948600D01* +X193662410Y-48948600D01* +X193730543Y-48938673D01* +X193835633Y-48887298D01* +X193918348Y-48804583D01* +X193969723Y-48699493D01* +X193979650Y-48631360D01* +X193979650Y-48014840D01* +X194528650Y-48014840D01* +X194528650Y-48631360D01* +X194530519Y-48644186D01* +X194538577Y-48699495D01* +X194587515Y-48799599D01* +X194589952Y-48804583D01* +X194672667Y-48887298D01* +X194720803Y-48910830D01* +X194777754Y-48938672D01* +X194777755Y-48938672D01* +X194777757Y-48938673D01* +X194845890Y-48948600D01* +X194845893Y-48948600D01* +X195312407Y-48948600D01* +X195312410Y-48948600D01* +X195380543Y-48938673D01* +X195450049Y-48904693D01* +X195510629Y-48896123D01* +X195564679Y-48924798D01* +X195589154Y-48968011D01* +X195598150Y-49001585D01* +X195598152Y-49001589D01* +X195657457Y-49104308D01* +X195657459Y-49104310D01* +X195657461Y-49104313D01* +X195741337Y-49188189D01* +X195741339Y-49188190D01* +X195741341Y-49188192D01* +X195844060Y-49247497D01* +X195844061Y-49247497D01* +X195844064Y-49247499D01* +X195958641Y-49278200D01* +X195958643Y-49278200D01* +X196077257Y-49278200D01* +X196077259Y-49278200D01* +X196191836Y-49247499D01* +X196191838Y-49247497D01* +X196191840Y-49247497D01* +X196294558Y-49188192D01* +X196294558Y-49188191D01* +X196294563Y-49188189D01* +X196375557Y-49107194D01* +X196430072Y-49079419D01* +X196445559Y-49078200D01* +X196974379Y-49078200D01* +X197020412Y-49059132D01* +X197066447Y-49040064D01* +X197128913Y-48977596D01* +X197183429Y-48949819D01* +X197198917Y-48948600D01* +X197662407Y-48948600D01* +X197662410Y-48948600D01* +X197730543Y-48938673D01* +X197835633Y-48887298D01* +X197918348Y-48804583D01* +X197969723Y-48699493D01* +X197979650Y-48631360D01* +X197979650Y-48014840D01* +X198528650Y-48014840D01* +X198528650Y-48631360D01* +X198530519Y-48644186D01* +X198538577Y-48699495D01* +X198587515Y-48799599D01* +X198589952Y-48804583D01* +X198672667Y-48887298D01* +X198720803Y-48910830D01* +X198777754Y-48938672D01* +X198777755Y-48938672D01* +X198777757Y-48938673D01* +X198845890Y-48948600D01* +X198845893Y-48948600D01* +X199312407Y-48948600D01* +X199312410Y-48948600D01* +X199380543Y-48938673D01* +X199485633Y-48887298D01* +X199555287Y-48817643D01* +X199609801Y-48789867D01* +X199670233Y-48799438D01* +X199695289Y-48817641D01* +X199730637Y-48852989D01* +X199730639Y-48852990D01* +X199730641Y-48852992D01* +X199833360Y-48912297D01* +X199833361Y-48912297D01* +X199833364Y-48912299D01* +X199947941Y-48943000D01* +X199947943Y-48943000D01* +X200066557Y-48943000D01* +X200066559Y-48943000D01* +X200181136Y-48912299D01* +X200181138Y-48912297D01* +X200181140Y-48912297D01* +X200283858Y-48852992D01* +X200283858Y-48852991D01* +X200283863Y-48852989D01* +X200364857Y-48771994D01* +X200419372Y-48744219D01* +X200434859Y-48743000D01* +X200848047Y-48743000D01* +X200906238Y-48761907D01* +X200936987Y-48798519D01* +X200939952Y-48804583D01* +X201022667Y-48887298D01* +X201070803Y-48910830D01* +X201127754Y-48938672D01* +X201127755Y-48938672D01* +X201127757Y-48938673D01* +X201195890Y-48948600D01* +X201195893Y-48948600D01* +X201662407Y-48948600D01* +X201662410Y-48948600D01* +X201730543Y-48938673D01* +X201835633Y-48887298D01* +X201918348Y-48804583D01* +X201969723Y-48699493D01* +X201979650Y-48631360D01* +X201979650Y-48014840D01* +X202528650Y-48014840D01* +X202528650Y-48631360D01* +X202530519Y-48644186D01* +X202538577Y-48699495D01* +X202587515Y-48799599D01* +X202589952Y-48804583D01* +X202672667Y-48887298D01* +X202720803Y-48910830D01* +X202777754Y-48938672D01* +X202777755Y-48938672D01* +X202777757Y-48938673D01* +X202845890Y-48948600D01* +X202845893Y-48948600D01* +X203312407Y-48948600D01* +X203312410Y-48948600D01* +X203380543Y-48938673D01* +X203485633Y-48887298D01* +X203568348Y-48804583D01* +X203619723Y-48699493D01* +X203629650Y-48631360D01* +X203629650Y-48014840D01* +X203619723Y-47946707D01* +X203615028Y-47937104D01* +X203568348Y-47841618D01* +X203568348Y-47841617D01* +X203485633Y-47758902D01* +X203385169Y-47709788D01* +X203341196Y-47667246D01* +X203329650Y-47620848D01* +X203329650Y-45272600D01* +X203348557Y-45214409D01* +X203398057Y-45178445D01* +X203428650Y-45173600D01* +X203466429Y-45173600D01* +X203493281Y-45169346D01* +X203558748Y-45158978D01* +X203670023Y-45102280D01* +X203758330Y-45013973D01* +X203815028Y-44902698D01* +X203826714Y-44828916D01* +X203829650Y-44810378D01* +X203829650Y-44573101D01* +X204329150Y-44573101D01* +X204329150Y-44828916D01* +X204339556Y-44930770D01* +X204394245Y-45095812D01* +X204485518Y-45243788D01* +X204608461Y-45366731D01* +X204756437Y-45458004D01* +X204921479Y-45512693D01* +X205023334Y-45523100D01* +X205066649Y-45523100D01* +X205066650Y-45523099D01* +X205066650Y-44573101D01* +X205566650Y-44573101D01* +X205566650Y-45523099D01* +X205566651Y-45523100D01* +X205609966Y-45523100D01* +X205711820Y-45512693D01* +X205876862Y-45458004D01* +X206024838Y-45366731D01* +X206147781Y-45243788D01* +X206239054Y-45095812D01* +X206293743Y-44930770D01* +X206304150Y-44828916D01* +X206304150Y-44573101D01* +X206304149Y-44573100D01* +X205566651Y-44573100D01* +X205566650Y-44573101D01* +X205066650Y-44573101D01* +X205066649Y-44573100D01* +X204329151Y-44573100D01* +X204329150Y-44573101D01* +X203829650Y-44573101D01* +X203829650Y-43835822D01* +X203828769Y-43830260D01* +X203828769Y-43830259D01* +X203826714Y-43817283D01* +X204329150Y-43817283D01* +X204329150Y-44073099D01* +X204329151Y-44073100D01* +X205066649Y-44073100D01* +X205066650Y-44073099D01* +X205066650Y-43123101D01* +X205566650Y-43123101D01* +X205566650Y-44073099D01* +X205566651Y-44073100D01* +X206304149Y-44073100D01* +X206304150Y-44073099D01* +X206304150Y-43817283D01* +X206293743Y-43715429D01* +X206239054Y-43550387D01* +X206147781Y-43402411D01* +X206024838Y-43279468D01* +X205876862Y-43188195D01* +X205711820Y-43133506D01* +X205609966Y-43123100D01* +X205566651Y-43123100D01* +X205566650Y-43123101D01* +X205066650Y-43123101D01* +X205066649Y-43123100D01* +X205023334Y-43123100D01* +X204921479Y-43133506D01* +X204756437Y-43188195D01* +X204608461Y-43279468D01* +X204485518Y-43402411D01* +X204394245Y-43550387D01* +X204339556Y-43715429D01* +X204329150Y-43817283D01* +X203826714Y-43817283D01* +X203820993Y-43781164D01* +X203815028Y-43743502D01* +X203758330Y-43632227D01* +X203670023Y-43543920D01* +X203670020Y-43543918D01* +X203670021Y-43543918D01* +X203558751Y-43487223D01* +X203558748Y-43487222D01* +X203535667Y-43483566D01* +X203466429Y-43472600D01* +X203466426Y-43472600D01* +X202916874Y-43472600D01* +X202916871Y-43472600D01* +X202824552Y-43487222D01* +X202824548Y-43487223D01* +X202713279Y-43543918D01* +X202624968Y-43632229D01* +X202568273Y-43743498D01* +X202568272Y-43743502D01* +X202553650Y-43835821D01* +X202553650Y-44810378D01* +X202560225Y-44851889D01* +X202567543Y-44898098D01* +X202568272Y-44902697D01* +X202568273Y-44902701D01* +X202624968Y-45013970D01* +X202624970Y-45013973D01* +X202713277Y-45102280D01* +X202713279Y-45102281D01* +X202713281Y-45102282D01* +X202774595Y-45133524D01* +X202817860Y-45176788D01* +X202828650Y-45221733D01* +X202828650Y-47620848D01* +X202809743Y-47679039D01* +X202773130Y-47709789D01* +X202672668Y-47758901D01* +X202589951Y-47841618D01* +X202538577Y-47946704D01* +X202538577Y-47946707D01* +X202528650Y-48014840D01* +X201979650Y-48014840D01* +X201969723Y-47946707D01* +X201965028Y-47937104D01* +X201918348Y-47841618D01* +X201918348Y-47841617D01* +X201835633Y-47758902D01* +X201805574Y-47744207D01* +X201730545Y-47707527D01* +X201699417Y-47702992D01* +X201662410Y-47697600D01* +X201195890Y-47697600D01* +X201161823Y-47702563D01* +X201127754Y-47707527D01* +X201022668Y-47758901D01* +X200939951Y-47841618D01* +X200888577Y-47946704D01* +X200888577Y-47946707D01* +X200879146Y-48011440D01* +X200878650Y-48014843D01* +X200878650Y-48143000D01* +X200859743Y-48201191D01* +X200810243Y-48237155D01* +X200779650Y-48242000D01* +X200434859Y-48242000D01* +X200376668Y-48223093D01* +X200364861Y-48213009D01* +X200283863Y-48132011D01* +X200283860Y-48132009D01* +X200283858Y-48132007D01* +X200181139Y-48072702D01* +X200181140Y-48072702D01* +X200150563Y-48064509D01* +X200066559Y-48042000D01* +X199947941Y-48042000D01* +X199877817Y-48060789D01* +X199833359Y-48072702D01* +X199778150Y-48104578D01* +X199718302Y-48117300D01* +X199662406Y-48092413D01* +X199631813Y-48039425D01* +X199629650Y-48018842D01* +X199629650Y-48014843D01* +X199629650Y-48014840D01* +X199619723Y-47946707D01* +X199615028Y-47937104D01* +X199568348Y-47841618D01* +X199568348Y-47841617D01* +X199485633Y-47758902D01* +X199385169Y-47709788D01* +X199341196Y-47667246D01* +X199329650Y-47620848D01* +X199329650Y-45272600D01* +X199348557Y-45214409D01* +X199398057Y-45178445D01* +X199428650Y-45173600D01* +X199466429Y-45173600D01* +X199493281Y-45169346D01* +X199558748Y-45158978D01* +X199670023Y-45102280D01* +X199758330Y-45013973D01* +X199815028Y-44902698D01* +X199826714Y-44828916D01* +X199829650Y-44810378D01* +X199829650Y-44573101D01* +X200329150Y-44573101D01* +X200329150Y-44828916D01* +X200339556Y-44930770D01* +X200394245Y-45095812D01* +X200485518Y-45243788D01* +X200608461Y-45366731D01* +X200756437Y-45458004D01* +X200921479Y-45512693D01* +X201023334Y-45523100D01* +X201066649Y-45523100D01* +X201066650Y-45523099D01* +X201066650Y-44573101D01* +X201566650Y-44573101D01* +X201566650Y-45523099D01* +X201566651Y-45523100D01* +X201609966Y-45523100D01* +X201711820Y-45512693D01* +X201876862Y-45458004D01* +X202024838Y-45366731D01* +X202147781Y-45243788D01* +X202239054Y-45095812D01* +X202293743Y-44930770D01* +X202304150Y-44828916D01* +X202304150Y-44573101D01* +X202304149Y-44573100D01* +X201566651Y-44573100D01* +X201566650Y-44573101D01* +X201066650Y-44573101D01* +X201066649Y-44573100D01* +X200329151Y-44573100D01* +X200329150Y-44573101D01* +X199829650Y-44573101D01* +X199829650Y-43835822D01* +X199828769Y-43830260D01* +X199828769Y-43830259D01* +X199826714Y-43817283D01* +X200329150Y-43817283D01* +X200329150Y-44073099D01* +X200329151Y-44073100D01* +X201066649Y-44073100D01* +X201066650Y-44073099D01* +X201066650Y-43123101D01* +X201566650Y-43123101D01* +X201566650Y-44073099D01* +X201566651Y-44073100D01* +X202304149Y-44073100D01* +X202304150Y-44073099D01* +X202304150Y-43817283D01* +X202293743Y-43715429D01* +X202239054Y-43550387D01* +X202147781Y-43402411D01* +X202024838Y-43279468D01* +X201876862Y-43188195D01* +X201711820Y-43133506D01* +X201609966Y-43123100D01* +X201566651Y-43123100D01* +X201566650Y-43123101D01* +X201066650Y-43123101D01* +X201066649Y-43123100D01* +X201023334Y-43123100D01* +X200921479Y-43133506D01* +X200756437Y-43188195D01* +X200608461Y-43279468D01* +X200485518Y-43402411D01* +X200394245Y-43550387D01* +X200339556Y-43715429D01* +X200329150Y-43817283D01* +X199826714Y-43817283D01* +X199820993Y-43781164D01* +X199815028Y-43743502D01* +X199758330Y-43632227D01* +X199670023Y-43543920D01* +X199670020Y-43543918D01* +X199670021Y-43543918D01* +X199558751Y-43487223D01* +X199558748Y-43487222D01* +X199535667Y-43483566D01* +X199466429Y-43472600D01* +X199466426Y-43472600D01* +X198916874Y-43472600D01* +X198916871Y-43472600D01* +X198824552Y-43487222D01* +X198824548Y-43487223D01* +X198713279Y-43543918D01* +X198624968Y-43632229D01* +X198568273Y-43743498D01* +X198568272Y-43743502D01* +X198553650Y-43835821D01* +X198553650Y-44810378D01* +X198560225Y-44851889D01* +X198567543Y-44898098D01* +X198568272Y-44902697D01* +X198568273Y-44902701D01* +X198624968Y-45013970D01* +X198624970Y-45013973D01* +X198713277Y-45102280D01* +X198713279Y-45102281D01* +X198713281Y-45102282D01* +X198774595Y-45133524D01* +X198817860Y-45176788D01* +X198828650Y-45221733D01* +X198828650Y-47620848D01* +X198809743Y-47679039D01* +X198773130Y-47709789D01* +X198672668Y-47758901D01* +X198589951Y-47841618D01* +X198538577Y-47946704D01* +X198538577Y-47946707D01* +X198528650Y-48014840D01* +X197979650Y-48014840D01* +X197969723Y-47946707D01* +X197965028Y-47937104D01* +X197918348Y-47841618D01* +X197918348Y-47841617D01* +X197835633Y-47758902D01* +X197805574Y-47744207D01* +X197730545Y-47707527D01* +X197699417Y-47702992D01* +X197662410Y-47697600D01* +X197195890Y-47697600D01* +X197161823Y-47702563D01* +X197127754Y-47707527D01* +X197022668Y-47758901D01* +X196939951Y-47841618D01* +X196888577Y-47946704D01* +X196888577Y-47946707D01* +X196879146Y-48011440D01* +X196878650Y-48014843D01* +X196878650Y-48478200D01* +X196859743Y-48536391D01* +X196810243Y-48572355D01* +X196779650Y-48577200D01* +X196445559Y-48577200D01* +X196387368Y-48558293D01* +X196375561Y-48548209D01* +X196294563Y-48467211D01* +X196294560Y-48467209D01* +X196294558Y-48467207D01* +X196191839Y-48407902D01* +X196191840Y-48407902D01* +X196178301Y-48404274D01* +X196077259Y-48377200D01* +X195958641Y-48377200D01* +X195888517Y-48395989D01* +X195844059Y-48407902D01* +X195778150Y-48445956D01* +X195718302Y-48458678D01* +X195662406Y-48433792D01* +X195631813Y-48380804D01* +X195629650Y-48360220D01* +X195629650Y-48014843D01* +X195629650Y-48014840D01* +X195619723Y-47946707D01* +X195615028Y-47937104D01* +X195568348Y-47841618D01* +X195568348Y-47841617D01* +X195485633Y-47758902D01* +X195385169Y-47709788D01* +X195341196Y-47667246D01* +X195329650Y-47620848D01* +X195329650Y-45272600D01* +X195348557Y-45214409D01* +X195398057Y-45178445D01* +X195428650Y-45173600D01* +X195466429Y-45173600D01* +X195493281Y-45169346D01* +X195558748Y-45158978D01* +X195670023Y-45102280D01* +X195758330Y-45013973D01* +X195815028Y-44902698D01* +X195826714Y-44828916D01* +X195829650Y-44810378D01* +X195829650Y-44573101D01* +X196329150Y-44573101D01* +X196329150Y-44828916D01* +X196339556Y-44930770D01* +X196394245Y-45095812D01* +X196485518Y-45243788D01* +X196608461Y-45366731D01* +X196756437Y-45458004D01* +X196921479Y-45512693D01* +X197023334Y-45523100D01* +X197066649Y-45523100D01* +X197066650Y-45523099D01* +X197066650Y-44573101D01* +X197566650Y-44573101D01* +X197566650Y-45523099D01* +X197566651Y-45523100D01* +X197609966Y-45523100D01* +X197711820Y-45512693D01* +X197876862Y-45458004D01* +X198024838Y-45366731D01* +X198147781Y-45243788D01* +X198239054Y-45095812D01* +X198293743Y-44930770D01* +X198304150Y-44828916D01* +X198304150Y-44573101D01* +X198304149Y-44573100D01* +X197566651Y-44573100D01* +X197566650Y-44573101D01* +X197066650Y-44573101D01* +X197066649Y-44573100D01* +X196329151Y-44573100D01* +X196329150Y-44573101D01* +X195829650Y-44573101D01* +X195829650Y-43835822D01* +X195828769Y-43830260D01* +X195828769Y-43830259D01* +X195826714Y-43817283D01* +X196329150Y-43817283D01* +X196329150Y-44073099D01* +X196329151Y-44073100D01* +X197066649Y-44073100D01* +X197066650Y-44073099D01* +X197066650Y-43123101D01* +X197566650Y-43123101D01* +X197566650Y-44073099D01* +X197566651Y-44073100D01* +X198304149Y-44073100D01* +X198304150Y-44073099D01* +X198304150Y-43817283D01* +X198293743Y-43715429D01* +X198239054Y-43550387D01* +X198147781Y-43402411D01* +X198024838Y-43279468D01* +X197876862Y-43188195D01* +X197711820Y-43133506D01* +X197609966Y-43123100D01* +X197566651Y-43123100D01* +X197566650Y-43123101D01* +X197066650Y-43123101D01* +X197066649Y-43123100D01* +X197023334Y-43123100D01* +X196921479Y-43133506D01* +X196756437Y-43188195D01* +X196608461Y-43279468D01* +X196485518Y-43402411D01* +X196394245Y-43550387D01* +X196339556Y-43715429D01* +X196329150Y-43817283D01* +X195826714Y-43817283D01* +X195820993Y-43781164D01* +X195815028Y-43743502D01* +X195758330Y-43632227D01* +X195670023Y-43543920D01* +X195670020Y-43543918D01* +X195670021Y-43543918D01* +X195558751Y-43487223D01* +X195558748Y-43487222D01* +X195535667Y-43483566D01* +X195466429Y-43472600D01* +X195466426Y-43472600D01* +X194916874Y-43472600D01* +X194916871Y-43472600D01* +X194824552Y-43487222D01* +X194824548Y-43487223D01* +X194713279Y-43543918D01* +X194624968Y-43632229D01* +X194568273Y-43743498D01* +X194568272Y-43743502D01* +X194553650Y-43835821D01* +X194553650Y-44810378D01* +X194560225Y-44851889D01* +X194567543Y-44898098D01* +X194568272Y-44902697D01* +X194568273Y-44902701D01* +X194624968Y-45013970D01* +X194624970Y-45013973D01* +X194713277Y-45102280D01* +X194713279Y-45102281D01* +X194713281Y-45102282D01* +X194774595Y-45133524D01* +X194817860Y-45176788D01* +X194828650Y-45221733D01* +X194828650Y-47620848D01* +X194809743Y-47679039D01* +X194773130Y-47709789D01* +X194672668Y-47758901D01* +X194589951Y-47841618D01* +X194538577Y-47946704D01* +X194538577Y-47946707D01* +X194528650Y-48014840D01* +X193979650Y-48014840D01* +X193969723Y-47946707D01* +X193965028Y-47937104D01* +X193918348Y-47841618D01* +X193918348Y-47841617D01* +X193835633Y-47758902D01* +X193805574Y-47744207D01* +X193730545Y-47707527D01* +X193699417Y-47702992D01* +X193662410Y-47697600D01* +X193195890Y-47697600D01* +X193161823Y-47702563D01* +X193127754Y-47707527D01* +X193022668Y-47758901D01* +X192939951Y-47841618D01* +X192888577Y-47946704D01* +X192888577Y-47946707D01* +X192878650Y-48014840D01* +X192878650Y-48631360D01* +X192880519Y-48644186D01* +X192888577Y-48699495D01* +X192912011Y-48747430D01* +X192920582Y-48808012D01* +X192893074Y-48860913D01* +X192511154Y-49242834D01* +X192456637Y-49270612D01* +X192396205Y-49261041D01* +X192352940Y-49217776D01* +X192342150Y-49172831D01* +X192342150Y-46208281D01* +X192342149Y-46208272D01* +X192333417Y-46164379D01* +X192333415Y-46164375D01* +X192319341Y-46143312D01* +X192300154Y-46114596D01* +X192277651Y-46099560D01* +X192250374Y-46081334D01* +X192250370Y-46081332D01* +X192206477Y-46072600D01* +X192206470Y-46072600D01* +X190176830Y-46072600D01* +X190176822Y-46072600D01* +X190132929Y-46081332D01* +X190132925Y-46081334D01* +X190083148Y-46114594D01* +X190083144Y-46114598D01* +X190049884Y-46164375D01* +X190049882Y-46164379D01* +X190041150Y-46208272D01* +X190041150Y-49437927D01* +X190049882Y-49481820D01* +X190049883Y-49481822D01* +X190057256Y-49492857D01* +X190073863Y-49551746D01* +X190052684Y-49609149D01* +X190044944Y-49617859D01* +X190025573Y-49637230D01* +X189954383Y-49743775D01* +X189905349Y-49862154D01* +X189905349Y-49862156D01* +X189880351Y-49987828D01* +X189880351Y-50115971D01* +X189887754Y-50153189D01* +X189903204Y-50230862D01* +X189905349Y-50241643D01* +X189905349Y-50241645D01* +X189954383Y-50360024D01* +X190016701Y-50453292D01* +X190025573Y-50466569D01* +X190116181Y-50557177D01* +X190116184Y-50557179D01* +X190128763Y-50565584D01* +X190130020Y-50567179D01* +X190131953Y-50567807D01* +X190148852Y-50591067D01* +X190166643Y-50613634D01* +X190166722Y-50615663D01* +X190167917Y-50617307D01* +X190167917Y-50646061D01* +X190169045Y-50674772D01* +X190167917Y-50676460D01* +X190167917Y-50678493D01* +X190151015Y-50701756D01* +X190135053Y-50725646D01* +X190133147Y-50726349D01* +X190131953Y-50727993D01* +X190104614Y-50736875D01* +X190077649Y-50746824D01* +X190073762Y-50746900D01* +X189990359Y-50746900D01* +X189932168Y-50727993D01* +X189920361Y-50717909D01* +X189839363Y-50636911D01* +X189839360Y-50636909D01* +X189839358Y-50636907D01* +X189736639Y-50577602D01* +X189736640Y-50577602D01* +X189719834Y-50573099D01* +X189622059Y-50546900D01* +X189503441Y-50546900D01* +X189433712Y-50565584D01* +X189388859Y-50577602D01* +X189286141Y-50636907D01* +X189202257Y-50720791D01* +X189142952Y-50823509D01* +X189142418Y-50825502D01* +X189112250Y-50938091D01* +X189112250Y-51056709D01* +X189136139Y-51145864D01* +X189142952Y-51171290D01* +X189159586Y-51200100D01* +X189172308Y-51259948D01* +X189147421Y-51315844D01* +X189094433Y-51346437D01* +X189073850Y-51348600D01* +X184072359Y-51348600D01* +X184014168Y-51329693D01* +X184002361Y-51319609D01* +X183921363Y-51238611D01* +X183921360Y-51238609D01* +X183921358Y-51238607D01* +X183818639Y-51179302D01* +X183818640Y-51179302D01* +X183802338Y-51174934D01* +X183704059Y-51148600D01* +X183585441Y-51148600D01* +X183528152Y-51163950D01* +X183470862Y-51179301D01* +X183426250Y-51205059D01* +X183366402Y-51217780D01* +X183310506Y-51192893D01* +X183279913Y-51139905D01* +X183277750Y-51119322D01* +X183277750Y-50289053D01* +X183296657Y-50230862D01* +X183306740Y-50219055D01* +X183896927Y-49628869D01* +X183904457Y-49617599D01* +X183952505Y-49579720D01* +X183986773Y-49573600D01* +X184406469Y-49573600D01* +X184406470Y-49573600D01* +X184406471Y-49573599D01* +X184406477Y-49573599D01* +X184428273Y-49569262D01* +X184450372Y-49564867D01* +X184500154Y-49531604D01* +X184533417Y-49481822D01* +X184542150Y-49437920D01* +X184542150Y-46208280D01* +X184542149Y-46208278D01* +X184542149Y-46208272D01* +X184533417Y-46164379D01* +X184533415Y-46164375D01* +X184519341Y-46143312D01* +X184500154Y-46114596D01* +X184477651Y-46099560D01* +X184450374Y-46081334D01* +X184450370Y-46081332D01* +X184406477Y-46072600D01* +X184406470Y-46072600D01* +X182376830Y-46072600D01* +X182376822Y-46072600D01* +X182332929Y-46081332D01* +X182332925Y-46081334D01* +X182283148Y-46114594D01* +X182283144Y-46114598D01* +X182249884Y-46164375D01* +X182249882Y-46164379D01* +X182241150Y-46208272D01* +X182241150Y-46695746D01* +X182222243Y-46753937D01* +X182172743Y-46789901D01* +X182111557Y-46789901D01* +X182072146Y-46765750D01* +X180991277Y-45684881D01* +X179879497Y-44573101D01* +X192329150Y-44573101D01* +X192329150Y-44828916D01* +X192339556Y-44930770D01* +X192394245Y-45095812D01* +X192485518Y-45243788D01* +X192608461Y-45366731D01* +X192756437Y-45458004D01* +X192921479Y-45512693D01* +X193023334Y-45523100D01* +X193066649Y-45523100D01* +X193066650Y-45523099D01* +X193066650Y-44573101D01* +X193566650Y-44573101D01* +X193566650Y-45523099D01* +X193566651Y-45523100D01* +X193609966Y-45523100D01* +X193711820Y-45512693D01* +X193876862Y-45458004D01* +X194024838Y-45366731D01* +X194147781Y-45243788D01* +X194239054Y-45095812D01* +X194293743Y-44930770D01* +X194304150Y-44828916D01* +X194304150Y-44573101D01* +X194304149Y-44573100D01* +X193566651Y-44573100D01* +X193566650Y-44573101D01* +X193066650Y-44573101D01* +X193066649Y-44573100D01* +X192329151Y-44573100D01* +X192329150Y-44573101D01* +X179879497Y-44573101D01* +X179123679Y-43817283D01* +X192329150Y-43817283D01* +X192329150Y-44073099D01* +X192329151Y-44073100D01* +X193066649Y-44073100D01* +X193066650Y-44073099D01* +X193066650Y-43123101D01* +X193566650Y-43123101D01* +X193566650Y-44073099D01* +X193566651Y-44073100D01* +X194304149Y-44073100D01* +X194304150Y-44073099D01* +X194304150Y-43817283D01* +X194293743Y-43715429D01* +X194239054Y-43550387D01* +X194147781Y-43402411D01* +X194024838Y-43279468D01* +X193876862Y-43188195D01* +X193711820Y-43133506D01* +X193609966Y-43123100D01* +X193566651Y-43123100D01* +X193566650Y-43123101D01* +X193066650Y-43123101D01* +X193066649Y-43123100D01* +X193023334Y-43123100D01* +X192921479Y-43133506D01* +X192756437Y-43188195D01* +X192608461Y-43279468D01* +X192485518Y-43402411D01* +X192394245Y-43550387D01* +X192339556Y-43715429D01* +X192329150Y-43817283D01* +X179123679Y-43817283D01* +X178919319Y-43612923D01* +X178875423Y-43583593D01* +X178812776Y-43541734D01* +X178694397Y-43492700D01* +X178694395Y-43492699D01* +X178694394Y-43492699D01* +X178568719Y-43467700D01* +X170332481Y-43467700D01* +X170332480Y-43467700D01* +X170269643Y-43480199D01* +X170206806Y-43492699D01* +X170206805Y-43492699D01* +X170206802Y-43492700D01* +X170088423Y-43541734D01* +X169981881Y-43612922D01* +X168914662Y-44680139D01* +X168865182Y-44705349D01* +X168865372Y-44705963D01* +X168861831Y-44707057D01* +X168860146Y-44707916D01* +X168858945Y-44708099D01* +X168858027Y-44708232D01* +X168745440Y-44763273D01* +X168656823Y-44851890D01* +X168601784Y-44964473D01* +X168601349Y-44967460D01* +X168594573Y-45013973D01* +X168591150Y-45037467D01* +X168591150Y-45053305D01* +X168583615Y-45091189D01* +X168566148Y-45133357D01* +X168541151Y-45259028D01* +X168541151Y-45387171D01* +X168552532Y-45444387D01* +X168562599Y-45494999D01* +X168565263Y-45508388D01* +X168562275Y-45533626D01* +X168562075Y-45559036D01* +X168558732Y-45563561D01* +X168558071Y-45569149D01* +X168540819Y-45587812D01* +X168525722Y-45608251D01* +X168520786Y-45609484D01* +X168516539Y-45614079D01* +X168467384Y-45626699D01* +X168457496Y-45626620D01* +X168454059Y-45625700D01* +X168340749Y-45625700D01* +X168340369Y-45625697D01* +X168311723Y-45616138D01* +X168282959Y-45606793D01* +X168282717Y-45606460D01* +X168282329Y-45606331D01* +X168264787Y-45581782D01* +X168246995Y-45557293D01* +X168246911Y-45556765D01* +X168246757Y-45556549D01* +X168246762Y-45555826D01* +X168242150Y-45526700D01* +X168242150Y-45037467D01* +X168239383Y-45018475D01* +X168231516Y-44964475D01* +X168176476Y-44851889D01* +X168087861Y-44763274D01* +X167975275Y-44708234D01* +X167975276Y-44708234D01* +X167941855Y-44703365D01* +X167902286Y-44697600D01* +X167381014Y-44697600D01* +X167341445Y-44703365D01* +X167308023Y-44708234D01* +X167195440Y-44763273D01* +X167106823Y-44851890D01* +X167051784Y-44964473D01* +X167051349Y-44967460D01* +X167041150Y-45037464D01* +X155991649Y-45037464D01* +X155991649Y-44273113D01* +X155981157Y-44170412D01* +X155981154Y-44170400D01* +X155948913Y-44073101D01* +X159841651Y-44073101D01* +X159841651Y-44198086D01* +X159852142Y-44300787D01* +X159852145Y-44300799D01* +X159907293Y-44467224D01* +X159999330Y-44616440D01* +X160123309Y-44740419D01* +X160272525Y-44832456D01* +X160438956Y-44887606D01* +X160541662Y-44898099D01* +X161441648Y-44898099D01* +X161441650Y-44898098D01* +X161441650Y-44073101D01* +X161941650Y-44073101D01* +X161941650Y-44898098D01* +X161941651Y-44898099D01* +X162841636Y-44898099D01* +X162944337Y-44887607D01* +X162944349Y-44887604D01* +X163110774Y-44832456D01* +X163259990Y-44740419D01* +X163383969Y-44616440D01* +X163476006Y-44467224D01* +X163531156Y-44300793D01* +X163541650Y-44198087D01* +X163541650Y-44073101D01* +X163541649Y-44073100D01* +X161941651Y-44073100D01* +X161941650Y-44073101D01* +X161441650Y-44073101D01* +X161441649Y-44073100D01* +X159841652Y-44073100D01* +X159841651Y-44073101D01* +X155948913Y-44073101D01* +X155945643Y-44063233D01* +X155926006Y-44003974D01* +X155833969Y-43854759D01* +X155709990Y-43730780D01* +X155560774Y-43638743D01* +X155394343Y-43583593D01* +X155291637Y-43573100D01* +X154941651Y-43573100D01* +X154941650Y-43573101D01* +X154441650Y-43573101D01* +X154441649Y-43573100D01* +X154091663Y-43573100D01* +X153988962Y-43583592D01* +X153988950Y-43583595D01* +X153822525Y-43638743D01* +X153673309Y-43730780D01* +X153549330Y-43854759D01* +X153457293Y-44003975D01* +X153402143Y-44170406D01* +X153391650Y-44273112D01* +X86718470Y-44273112D01* +X86585915Y-44100362D01* +X86414388Y-43928835D01* +X86414383Y-43928831D01* +X86414381Y-43928829D01* +X86221942Y-43781166D01* +X86156706Y-43743502D01* +X86011862Y-43659876D01* +X86011858Y-43659874D01* +X86011854Y-43659872D01* +X85787755Y-43567048D01* +X85787754Y-43567047D01* +X85787750Y-43567046D01* +X85553439Y-43504262D01* +X85553436Y-43504261D01* +X85553434Y-43504261D01* +X85312939Y-43472600D01* +X85312938Y-43472600D01* +X85070362Y-43472600D01* +X85070360Y-43472600D01* +X84829868Y-43504261D01* +X84829863Y-43504261D01* +X84595557Y-43567044D01* +X84595544Y-43567048D01* +X84371445Y-43659872D01* +X84161357Y-43781166D01* +X83968918Y-43928829D01* +X83797379Y-44100368D01* +X83649716Y-44292807D01* +X83528422Y-44502895D01* +X83435598Y-44726994D01* +X83435594Y-44727007D01* +X83372811Y-44961313D01* +X83372811Y-44961318D01* +X83341150Y-45201810D01* +X80766348Y-45201810D01* +X80764575Y-43448112D01* +X159841650Y-43448112D01* +X159841650Y-43573099D01* +X159841651Y-43573100D01* +X161441649Y-43573100D01* +X161441650Y-43573099D01* +X161441650Y-42748101D01* +X161941650Y-42748101D01* +X161941650Y-43573099D01* +X161941651Y-43573100D01* +X163541648Y-43573100D01* +X163541649Y-43573099D01* +X163541649Y-43448113D01* +X163531157Y-43345412D01* +X163531154Y-43345400D01* +X163476006Y-43178975D01* +X163383969Y-43029759D01* +X163259990Y-42905780D01* +X163110774Y-42813743D01* +X162944343Y-42758593D01* +X162841637Y-42748100D01* +X161941651Y-42748100D01* +X161941650Y-42748101D01* +X161441650Y-42748101D01* +X161441649Y-42748100D01* +X160541663Y-42748100D01* +X160438962Y-42758592D01* +X160438950Y-42758595D01* +X160272525Y-42813743D01* +X160123309Y-42905780D01* +X159999330Y-43029759D01* +X159907293Y-43178975D01* +X159852143Y-43345406D01* +X159841650Y-43448112D01* +X80764575Y-43448112D01* +X80762023Y-40922698D01* +X80780872Y-40864490D01* +X80830335Y-40828476D01* +X80861023Y-40823600D01* +X214592150Y-40823600D01* +X214650341Y-40842507D01* +G37* +%TD.AperFunction*% +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Mask.gts b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Mask.gts new file mode 100644 index 0000000..540f953 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Mask.gts @@ -0,0 +1,1002 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Soldermask,Top*% +%TF.FilePolarity,Negative*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +%AMFreePoly0* +4,1,23,0.550000,-0.750000,0.000000,-0.750000,0.000000,-0.745722,-0.065263,-0.745722,-0.191342,-0.711940,-0.304381,-0.646677,-0.396677,-0.554381,-0.461940,-0.441342,-0.495722,-0.315263,-0.495722,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.495722,0.250000,-0.495722,0.315263,-0.461940,0.441342,-0.396677,0.554381,-0.304381,0.646677,-0.191342,0.711940,-0.065263,0.745722,0.000000,0.745722, +0.000000,0.750000,0.550000,0.750000,0.550000,-0.750000,0.550000,-0.750000,$1*% +%AMFreePoly1* +4,1,23,0.000000,0.745722,0.065263,0.745722,0.191342,0.711940,0.304381,0.646677,0.396677,0.554381,0.461940,0.441342,0.495722,0.315263,0.495722,0.250000,0.500000,0.250000,0.500000,-0.250000,0.495722,-0.250000,0.495722,-0.315263,0.461940,-0.441342,0.396677,-0.554381,0.304381,-0.646677,0.191342,-0.711940,0.065263,-0.745722,0.000000,-0.745722,0.000000,-0.750000,-0.550000,-0.750000, +-0.550000,0.750000,0.000000,0.750000,0.000000,0.745722,0.000000,0.745722,$1*% +%AMFreePoly2* +4,1,23,0.500000,-0.750000,0.000000,-0.750000,0.000000,-0.745722,-0.065263,-0.745722,-0.191342,-0.711940,-0.304381,-0.646677,-0.396677,-0.554381,-0.461940,-0.441342,-0.495722,-0.315263,-0.495722,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.495722,0.250000,-0.495722,0.315263,-0.461940,0.441342,-0.396677,0.554381,-0.304381,0.646677,-0.191342,0.711940,-0.065263,0.745722,0.000000,0.745722, +0.000000,0.750000,0.500000,0.750000,0.500000,-0.750000,0.500000,-0.750000,$1*% +%AMFreePoly3* +4,1,23,0.000000,0.745722,0.065263,0.745722,0.191342,0.711940,0.304381,0.646677,0.396677,0.554381,0.461940,0.441342,0.495722,0.315263,0.495722,0.250000,0.500000,0.250000,0.500000,-0.250000,0.495722,-0.250000,0.495722,-0.315263,0.461940,-0.441342,0.396677,-0.554381,0.304381,-0.646677,0.191342,-0.711940,0.065263,-0.745722,0.000000,-0.745722,0.000000,-0.750000,-0.500000,-0.750000, +-0.500000,0.750000,0.000000,0.750000,0.000000,0.745722,0.000000,0.745722,$1*% +G04 Aperture macros list end* +%ADD10RoundRect,0.200000X-0.200000X-0.275000X0.200000X-0.275000X0.200000X0.275000X-0.200000X0.275000X0*% +%ADD11RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*% +%ADD12O,1.700000X1.950000*% +%ADD13RoundRect,0.200000X0.200000X0.275000X-0.200000X0.275000X-0.200000X-0.275000X0.200000X-0.275000X0*% +%ADD14RoundRect,0.250000X-0.650000X1.000000X-0.650000X-1.000000X0.650000X-1.000000X0.650000X1.000000X0*% +%ADD15RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*% +%ADD16O,1.950000X1.700000*% +%ADD17RoundRect,0.243750X-0.243750X-0.456250X0.243750X-0.456250X0.243750X0.456250X-0.243750X0.456250X0*% +%ADD18RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*% +%ADD19RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*% +%ADD20O,2.000000X1.700000*% +%ADD21RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD22RoundRect,0.150000X0.825000X0.150000X-0.825000X0.150000X-0.825000X-0.150000X0.825000X-0.150000X0*% +%ADD23R,2.290000X3.000000*% +%ADD24R,1.700000X1.700000*% +%ADD25C,1.700000*% +%ADD26RoundRect,0.225000X-0.225000X-0.250000X0.225000X-0.250000X0.225000X0.250000X-0.225000X0.250000X0*% +%ADD27RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*% +%ADD28O,1.700000X2.000000*% +%ADD29RoundRect,0.150000X-0.587500X-0.150000X0.587500X-0.150000X0.587500X0.150000X-0.587500X0.150000X0*% +%ADD30RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*% +%ADD31RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%ADD32R,0.500000X0.300000*% +%ADD33RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*% +%ADD34R,1.350000X1.350000*% +%ADD35C,1.350000*% +%ADD36RoundRect,0.250000X-1.000000X-0.650000X1.000000X-0.650000X1.000000X0.650000X-1.000000X0.650000X0*% +%ADD37RoundRect,0.250000X-0.312500X-0.625000X0.312500X-0.625000X0.312500X0.625000X-0.312500X0.625000X0*% +%ADD38C,6.000000*% +%ADD39RoundRect,0.250000X-1.000000X-0.900000X1.000000X-0.900000X1.000000X0.900000X-1.000000X0.900000X0*% +%ADD40RoundRect,0.200000X-0.275000X0.200000X-0.275000X-0.200000X0.275000X-0.200000X0.275000X0.200000X0*% +%ADD41R,2.000000X3.200000*% +%ADD42RoundRect,0.087500X-0.250000X-0.087500X0.250000X-0.087500X0.250000X0.087500X-0.250000X0.087500X0*% +%ADD43C,1.500000*% +%ADD44R,1.250000X1.000000*% +%ADD45RoundRect,0.250000X1.100000X-0.325000X1.100000X0.325000X-1.100000X0.325000X-1.100000X-0.325000X0*% +%ADD46RoundRect,0.200000X0.275000X-0.200000X0.275000X0.200000X-0.275000X0.200000X-0.275000X-0.200000X0*% +%ADD47FreePoly0,0.000000*% +%ADD48R,1.000000X1.500000*% +%ADD49FreePoly1,0.000000*% +%ADD50FreePoly2,0.000000*% +%ADD51FreePoly3,0.000000*% +%ADD52RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*% +%ADD53RoundRect,0.250000X-0.325000X-1.100000X0.325000X-1.100000X0.325000X1.100000X-0.325000X1.100000X0*% +%ADD54C,0.700000*% +%ADD55O,0.900000X2.400000*% +%ADD56O,0.900000X1.700000*% +%ADD57RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*% +%ADD58C,2.600000*% +%ADD59RoundRect,0.250000X-0.312500X-1.450000X0.312500X-1.450000X0.312500X1.450000X-0.312500X1.450000X0*% +%ADD60R,2.000000X2.000000*% +%ADD61C,2.000000*% +%ADD62RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*% +%ADD63RoundRect,0.062500X-0.362500X-0.062500X0.362500X-0.062500X0.362500X0.062500X-0.362500X0.062500X0*% +%ADD64RoundRect,0.062500X-0.062500X-0.362500X0.062500X-0.362500X0.062500X0.362500X-0.062500X0.362500X0*% +%ADD65R,2.650000X3.650000*% +%ADD66RoundRect,0.250000X-0.850000X-0.350000X0.850000X-0.350000X0.850000X0.350000X-0.850000X0.350000X0*% +%ADD67RoundRect,0.249997X-2.950003X-2.650003X2.950003X-2.650003X2.950003X2.650003X-2.950003X2.650003X0*% +%ADD68RoundRect,0.250000X0.550000X-1.500000X0.550000X1.500000X-0.550000X1.500000X-0.550000X-1.500000X0*% +%ADD69RoundRect,0.225000X-0.225000X-0.375000X0.225000X-0.375000X0.225000X0.375000X-0.225000X0.375000X0*% +%ADD70RoundRect,0.225000X0.225000X0.375000X-0.225000X0.375000X-0.225000X-0.375000X0.225000X-0.375000X0*% +%ADD71R,1.600000X1.600000*% +%ADD72O,1.600000X1.600000*% +G04 APERTURE END LIST* +%TO.C,JP4*% +G36* +X140641650Y-99073100D02* +G01* +X142141650Y-99073100D01* +X142141650Y-100573100D01* +X140641650Y-100573100D01* +X140641650Y-99073100D01* +G37* +%TO.C,JP1*% +G36* +X165391650Y-79573100D02* +G01* +X165691650Y-79573100D01* +X165691650Y-81073100D01* +X165391650Y-81073100D01* +X165391650Y-79573100D01* +G37* +%TO.C,JP3*% +G36* +X140641650Y-94073100D02* +G01* +X142141650Y-94073100D01* +X142141650Y-95573100D01* +X140641650Y-95573100D01* +X140641650Y-94073100D01* +G37* +%TO.C,JP2*% +G36* +X140641650Y-89573100D02* +G01* +X142141650Y-89573100D01* +X142141650Y-91073100D01* +X140641650Y-91073100D01* +X140641650Y-89573100D01* +G37* +%TD*% +D10* +%TO.C,R2*% +X166541650Y-59323100D03* +X168191650Y-59323100D03* +%TD*% +D11* +%TO.C,P13*% +X116191650Y-46323100D03* +D12* +X118691650Y-46323100D03* +X121191650Y-46323100D03* +%TD*% +D13* +%TO.C,Rigb*% +X102191650Y-74323100D03* +X100541650Y-74323100D03* +%TD*% +D14* +%TO.C,Dbk*% +X168191650Y-63823100D03* +X168191650Y-67823100D03* +%TD*% +D15* +%TO.C,P6*% +X210191650Y-61823100D03* +D16* +X210191650Y-59323100D03* +X210191650Y-56823100D03* +X210191650Y-54323100D03* +%TD*% +D10* +%TO.C,Ren2*% +X177366650Y-59323100D03* +X179016650Y-59323100D03* +%TD*% +D17* +%TO.C,DB2*% +X197316650Y-44323100D03* +X199191650Y-44323100D03* +%TD*% +D18* +%TO.C,P4*% +X210191650Y-108323100D03* +D16* +X210191650Y-105823100D03* +X210191650Y-103323100D03* +%TD*% +D19* +%TO.C,P10*% +X210166650Y-80073100D03* +D20* +X210166650Y-77573100D03* +%TD*% +D21* +%TO.C,Ccomp*% +X175841650Y-52698100D03* +X175841650Y-54248100D03* +%TD*% +D22* +%TO.C,U7*% +X200096650Y-114478100D03* +X200096650Y-113208100D03* +X200096650Y-111938100D03* +X200096650Y-110668100D03* +X195146650Y-110668100D03* +X195146650Y-111938100D03* +X195146650Y-113208100D03* +X195146650Y-114478100D03* +D23* +X197621650Y-112573100D03* +%TD*% +D17* +%TO.C,DB1*% +X193316650Y-44323100D03* +X195191650Y-44323100D03* +%TD*% +D24* +%TO.C,J1*% +X107191650Y-56323100D03* +D25* +X109731650Y-56323100D03* +X112271650Y-56323100D03* +X114811650Y-56323100D03* +X117351650Y-56323100D03* +X119891650Y-56323100D03* +X122431650Y-56323100D03* +X124971650Y-56323100D03* +X127511650Y-56323100D03* +X130051650Y-56323100D03* +X132591650Y-56323100D03* +X135131650Y-56323100D03* +X137671650Y-56323100D03* +X140211650Y-56323100D03* +X142751650Y-56323100D03* +X145291650Y-56323100D03* +X147831650Y-56323100D03* +X150371650Y-56323100D03* +X152911650Y-56323100D03* +X155451650Y-56323100D03* +%TD*% +D26* +%TO.C,Ccomp2*% +X187191650Y-114823100D03* +X188741650Y-114823100D03* +%TD*% +D10* +%TO.C,R5*% +X91416650Y-112323100D03* +X93066650Y-112323100D03* +%TD*% +D27* +%TO.C,P11*% +X135791650Y-46323100D03* +D28* +X138291650Y-46323100D03* +%TD*% +D29* +%TO.C,Q1*% +X137712500Y-59950000D03* +X137712500Y-61850000D03* +X139587500Y-60900000D03* +%TD*% +D10* +%TO.C,Rg*% +X93366650Y-94323100D03* +X95016650Y-94323100D03* +%TD*% +D30* +%TO.C,Q7*% +X110241650Y-85323100D03* +X110241650Y-86593100D03* +X110241650Y-87863100D03* +X110241650Y-89133100D03* +X115191650Y-89133100D03* +X115191650Y-87863100D03* +X115191650Y-86593100D03* +X115191650Y-85323100D03* +%TD*% +D31* +%TO.C,C34*% +X130041650Y-104323100D03* +X131941650Y-104323100D03* +%TD*% +D10* +%TO.C,R31*% +X128091650Y-112323100D03* +X129741650Y-112323100D03* +%TD*% +%TO.C,Rfreq2*% +X178691650Y-111823100D03* +X180341650Y-111823100D03* +%TD*% +%TO.C,Rmled*% +X202225000Y-84450000D03* +X203875000Y-84450000D03* +%TD*% +D32* +%TO.C,U3*% +X123491650Y-117923100D03* +X123491650Y-118723100D03* +X124891650Y-118723100D03* +X124891650Y-117923100D03* +%TD*% +D33* +%TO.C,C40*% +X179691650Y-95373100D03* +X179691650Y-97273100D03* +%TD*% +D34* +%TO.C,J7*% +X174191650Y-74823100D03* +D35* +X174191650Y-76823100D03* +X174191650Y-78823100D03* +X174191650Y-80823100D03* +X174191650Y-82823100D03* +X174191650Y-84823100D03* +X174191650Y-86823100D03* +X174191650Y-88823100D03* +X174191650Y-90823100D03* +X174191650Y-92823100D03* +%TD*% +D36* +%TO.C,D2*% +X92191650Y-98323100D03* +X96191650Y-98323100D03* +%TD*% +D37* +%TO.C,RS1*% +X98729150Y-88323100D03* +X101654150Y-88323100D03* +%TD*% +D26* +%TO.C,Cu3*% +X132141650Y-112323100D03* +X133691650Y-112323100D03* +%TD*% +D10* +%TO.C,R3*% +X97041650Y-107323100D03* +X98691650Y-107323100D03* +%TD*% +%TO.C,R60*% +X178691650Y-102323100D03* +X180341650Y-102323100D03* +%TD*% +%TO.C,Rdfu*% +X110091650Y-112323100D03* +X111741650Y-112323100D03* +%TD*% +D38* +%TO.C,MH3*% +X85191650Y-135323100D03* +%TD*% +D39* +%TO.C,D10*% +X89041650Y-61823100D03* +X93341650Y-61823100D03* +%TD*% +D40* +%TO.C,Rcomp*% +X175841650Y-47798100D03* +X175841650Y-49448100D03* +%TD*% +D29* +%TO.C,Q5*% +X144512500Y-59250000D03* +X144512500Y-61150000D03* +X146387500Y-60200000D03* +%TD*% +D26* +%TO.C,C7*% +X95416650Y-116323100D03* +X96966650Y-116323100D03* +%TD*% +D38* +%TO.C,MH4*% +X211191650Y-135323100D03* +%TD*% +D27* +%TO.C,P2*% +X127191650Y-46323100D03* +D28* +X129691650Y-46323100D03* +%TD*% +D10* +%TO.C,R20*% +X173041650Y-45323100D03* +X174691650Y-45323100D03* +%TD*% +D26* +%TO.C,Cbst2*% +X187141650Y-109823100D03* +X188691650Y-109823100D03* +%TD*% +D10* +%TO.C,Rts*% +X96041650Y-102323100D03* +X97691650Y-102323100D03* +%TD*% +D29* +%TO.C,Q2*% +X105254150Y-95373100D03* +X105254150Y-97273100D03* +X107129150Y-96323100D03* +%TD*% +D26* +%TO.C,Cbst*% +X167641650Y-45323100D03* +X169191650Y-45323100D03* +%TD*% +D24* +%TO.C,H3*% +X111191650Y-46323100D03* +D25* +X111191650Y-48863100D03* +X111191650Y-51403100D03* +%TD*% +D41* +%TO.C,L6*% +X163791650Y-104823100D03* +X171591650Y-104823100D03* +%TD*% +D31* +%TO.C,C35*% +X129241650Y-96323100D03* +X131141650Y-96323100D03* +%TD*% +D42* +%TO.C,U4*% +X129599150Y-117173100D03* +X129599150Y-117673100D03* +X129599150Y-118173100D03* +X131024150Y-118173100D03* +X131024150Y-117673100D03* +X131024150Y-117173100D03* +%TD*% +D10* +%TO.C,RB3*% +X201429150Y-48323100D03* +X203079150Y-48323100D03* +%TD*% +D43* +%TO.C,TP1*% +X113191650Y-107323100D03* +%TD*% +D41* +%TO.C,L2*% +X183391650Y-47823100D03* +X191191650Y-47823100D03* +%TD*% +D26* +%TO.C,C9*% +X100816650Y-83323100D03* +X102366650Y-83323100D03* +%TD*% +D44* +%TO.C,SW4G*% +X144300000Y-135600000D03* +X152050000Y-135600000D03* +%TD*% +D34* +%TO.C,J8*% +X196541650Y-74823100D03* +D35* +X196541650Y-76823100D03* +X196541650Y-78823100D03* +X196541650Y-80823100D03* +X196541650Y-82823100D03* +X196541650Y-84823100D03* +X196541650Y-86823100D03* +X196541650Y-88823100D03* +X196541650Y-90823100D03* +X196541650Y-92823100D03* +%TD*% +D22* +%TO.C,U2*% +X171691650Y-54633100D03* +X171691650Y-53363100D03* +X171691650Y-52093100D03* +X171691650Y-50823100D03* +X166741650Y-50823100D03* +X166741650Y-52093100D03* +X166741650Y-53363100D03* +X166741650Y-54633100D03* +D23* +X169216650Y-52728100D03* +%TD*% +D10* +%TO.C,RB4*% +X205429150Y-48323100D03* +X207079150Y-48323100D03* +%TD*% +D45* +%TO.C,C22*% +X161691650Y-46773100D03* +X161691650Y-43823100D03* +%TD*% +D10* +%TO.C,R61*% +X178691650Y-107323100D03* +X180341650Y-107323100D03* +%TD*% +D46* +%TO.C,Rcc1*% +X161425000Y-125575000D03* +X161425000Y-123925000D03* +%TD*% +D10* +%TO.C,R1*% +X163041650Y-59323100D03* +X164691650Y-59323100D03* +%TD*% +D11* +%TO.C,P5*% +X98191650Y-46323100D03* +D12* +X100691650Y-46323100D03* +X103191650Y-46323100D03* +X105691650Y-46323100D03* +%TD*% +D17* +%TO.C,DB3*% +X201316650Y-44323100D03* +X203191650Y-44323100D03* +%TD*% +D33* +%TO.C,C41*% +X198691650Y-102323100D03* +X198691650Y-104223100D03* +%TD*% +D10* +%TO.C,R55*% +X101041650Y-107323100D03* +X102691650Y-107323100D03* +%TD*% +%TO.C,Rled*% +X94591650Y-112323100D03* +X96241650Y-112323100D03* +%TD*% +D47* +%TO.C,JP4*% +X140091650Y-99823100D03* +D48* +X141391650Y-99823100D03* +D49* +X142691650Y-99823100D03* +%TD*% +D10* +%TO.C,Rgs*% +X98366650Y-94323100D03* +X100016650Y-94323100D03* +%TD*% +D19* +%TO.C,P8*% +X210166650Y-70823100D03* +D20* +X210166650Y-68323100D03* +%TD*% +D10* +%TO.C,R41*% +X177366650Y-64823100D03* +X179016650Y-64823100D03* +%TD*% +D17* +%TO.C,DB4*% +X205316650Y-44323100D03* +X207191650Y-44323100D03* +%TD*% +D10* +%TO.C,RB2*% +X197429150Y-48323100D03* +X199079150Y-48323100D03* +%TD*% +D46* +%TO.C,Rcc2*% +X165400000Y-125575000D03* +X165400000Y-123925000D03* +%TD*% +D17* +%TO.C,D1*% +X99254150Y-116323100D03* +X101129150Y-116323100D03* +%TD*% +D10* +%TO.C,Rtp*% +X100041650Y-102323100D03* +X101691650Y-102323100D03* +%TD*% +D50* +%TO.C,JP1*% +X164891650Y-80323100D03* +D51* +X166191650Y-80323100D03* +%TD*% +D10* +%TO.C,R30*% +X124091650Y-112323100D03* +X125741650Y-112323100D03* +%TD*% +%TO.C,R6*% +X97916650Y-112323100D03* +X99566650Y-112323100D03* +%TD*% +D52* +%TO.C,P12*% +X210191650Y-121323100D03* +D20* +X210191650Y-118823100D03* +%TD*% +D53* +%TO.C,C32*% +X119191650Y-104323100D03* +X122141650Y-104323100D03* +%TD*% +D54* +%TO.C,J9*% +X161175000Y-129425000D03* +X162025000Y-129425000D03* +X162875000Y-129425000D03* +X163725000Y-129425000D03* +X164575000Y-129425000D03* +X165425000Y-129425000D03* +X166275000Y-129425000D03* +X167125000Y-129425000D03* +X167125000Y-130775000D03* +X166275000Y-130775000D03* +X165425000Y-130775000D03* +X164575000Y-130775000D03* +X163725000Y-130775000D03* +X162875000Y-130775000D03* +X162025000Y-130775000D03* +X161175000Y-130775000D03* +D55* +X159825000Y-130405000D03* +D56* +X159825000Y-133785000D03* +D55* +X168475000Y-130405000D03* +D56* +X168475000Y-133785000D03* +%TD*% +D29* +%TO.C,Q4*% +X91816650Y-104873100D03* +X91816650Y-106773100D03* +X93691650Y-105823100D03* +%TD*% +D57* +%TO.C,P1*% +X172691650Y-133823100D03* +D58* +X177691650Y-133823100D03* +X182691650Y-133823100D03* +X187691650Y-133823100D03* +X192691650Y-133823100D03* +%TD*% +D59* +%TO.C,F1*% +X145054150Y-46323100D03* +X149329150Y-46323100D03* +%TD*% +D10* +%TO.C,R52*% +X107541650Y-102323100D03* +X109191650Y-102323100D03* +%TD*% +D38* +%TO.C,MH2*% +X211191650Y-45323100D03* +%TD*% +D60* +%TO.C,K1*% +X189284150Y-55865600D03* +D61* +X189284150Y-58405600D03* +X189284150Y-66025600D03* +X194364150Y-66025600D03* +X194364150Y-58405600D03* +X194364150Y-55865600D03* +%TD*% +D24* +%TO.C,J2*% +X107191650Y-74103100D03* +D25* +X109731650Y-74103100D03* +X112271650Y-74103100D03* +X114811650Y-74103100D03* +X117351650Y-74103100D03* +X119891650Y-74103100D03* +X122431650Y-74103100D03* +X124971650Y-74103100D03* +X127511650Y-74103100D03* +X130051650Y-74103100D03* +X132591650Y-74103100D03* +X135131650Y-74103100D03* +X137671650Y-74103100D03* +X140211650Y-74103100D03* +X142751650Y-74103100D03* +X145291650Y-74103100D03* +X147831650Y-74103100D03* +X150371650Y-74103100D03* +X152911650Y-74103100D03* +X155451650Y-74103100D03* +%TD*% +D10* +%TO.C,R56*% +X105041650Y-107323100D03* +X106691650Y-107323100D03* +%TD*% +D26* +%TO.C,C11*% +X161416650Y-51223100D03* +X162966650Y-51223100D03* +%TD*% +D62* +%TO.C,C43*% +X182491650Y-122323100D03* +X187891650Y-122323100D03* +%TD*% +D29* +%TO.C,DzG*% +X98254150Y-60373100D03* +X98254150Y-62273100D03* +X100129150Y-61323100D03* +%TD*% +D40* +%TO.C,R40*% +X178366650Y-68498100D03* +X178366650Y-70148100D03* +%TD*% +D10* +%TO.C,R42*% +X114091650Y-112323100D03* +X115741650Y-112323100D03* +%TD*% +D38* +%TO.C,MH1*% +X85191650Y-45323100D03* +%TD*% +D63* +%TO.C,U6*% +X119791650Y-92823100D03* +X119791650Y-93323100D03* +X119791650Y-93823100D03* +X119791650Y-94323100D03* +X119791650Y-94823100D03* +X119791650Y-95323100D03* +X119791650Y-95823100D03* +D64* +X120741650Y-96773100D03* +X121241650Y-96773100D03* +X121741650Y-96773100D03* +X122241650Y-96773100D03* +X122741650Y-96773100D03* +D63* +X123691650Y-95823100D03* +X123691650Y-95323100D03* +X123691650Y-94823100D03* +X123691650Y-94323100D03* +X123691650Y-93823100D03* +X123691650Y-93323100D03* +X123691650Y-92823100D03* +D64* +X122741650Y-91873100D03* +X122241650Y-91873100D03* +X121741650Y-91873100D03* +X121241650Y-91873100D03* +X120741650Y-91873100D03* +D65* +X121741650Y-94323100D03* +%TD*% +D47* +%TO.C,JP3*% +X140091650Y-94823100D03* +D48* +X141391650Y-94823100D03* +D49* +X142691650Y-94823100D03* +%TD*% +D66* +%TO.C,Q10*% +X85151650Y-52043100D03* +D67* +X91451650Y-54323100D03* +D66* +X85151650Y-56603100D03* +%TD*% +D10* +%TO.C,R53*% +X134041650Y-91323100D03* +X135691650Y-91323100D03* +%TD*% +%TO.C,R51*% +X104041650Y-102323100D03* +X105691650Y-102323100D03* +%TD*% +D62* +%TO.C,C10*% +X86991650Y-71823100D03* +X92391650Y-71823100D03* +%TD*% +D10* +%TO.C,Rcomp2*% +X178866650Y-116323100D03* +X180516650Y-116323100D03* +%TD*% +D61* +%TO.C,SW1*% +X199191650Y-133323100D03* +X205691650Y-133323100D03* +X199191650Y-137823100D03* +X205691650Y-137823100D03* +%TD*% +D10* +%TO.C,R58*% +X134166650Y-104323100D03* +X135816650Y-104323100D03* +%TD*% +%TO.C,Rrp*% +X84366650Y-61323100D03* +X86016650Y-61323100D03* +%TD*% +D29* +%TO.C,Q6*% +X182254150Y-62373100D03* +X182254150Y-64273100D03* +X184129150Y-63323100D03* +%TD*% +D26* +%TO.C,C31*% +X111641650Y-97323100D03* +X113191650Y-97323100D03* +%TD*% +D10* +%TO.C,R21*% +X176266650Y-45323100D03* +X177916650Y-45323100D03* +%TD*% +D31* +%TO.C,C30*% +X99241650Y-98323100D03* +X101141650Y-98323100D03* +%TD*% +D10* +%TO.C,R7*% +X102091650Y-112323100D03* +X103741650Y-112323100D03* +%TD*% +D68* +%TO.C,C3*% +X154691650Y-51223100D03* +X154691650Y-45823100D03* +%TD*% +D69* +%TO.C,D5*% +X93541650Y-83323100D03* +X96841650Y-83323100D03* +%TD*% +D53* +%TO.C,C33*% +X124691650Y-104323100D03* +X127641650Y-104323100D03* +%TD*% +D46* +%TO.C,Rfreq*% +X161135950Y-56380200D03* +X161135950Y-54730200D03* +%TD*% +D18* +%TO.C,P3*% +X210191650Y-95323100D03* +D16* +X210191650Y-92823100D03* +X210191650Y-90323100D03* +X210191650Y-87823100D03* +%TD*% +D13* +%TO.C,Rig*% +X102191650Y-69323100D03* +X100541650Y-69323100D03* +%TD*% +D10* +%TO.C,RB1*% +X193429150Y-48323100D03* +X195079150Y-48323100D03* +%TD*% +%TO.C,Ren1*% +X173366650Y-59323100D03* +X175016650Y-59323100D03* +%TD*% +D26* +%TO.C,C5*% +X91416650Y-116323100D03* +X92966650Y-116323100D03* +%TD*% +D10* +%TO.C,R8*% +X106091650Y-112323100D03* +X107741650Y-112323100D03* +%TD*% +D26* +%TO.C,C24*% +X118141650Y-112323100D03* +X119691650Y-112323100D03* +%TD*% +D10* +%TO.C,R54*% +X134041650Y-95323100D03* +X135691650Y-95323100D03* +%TD*% +%TO.C,R57*% +X134041650Y-99823100D03* +X135691650Y-99823100D03* +%TD*% +%TO.C,R50*% +X111541650Y-102323100D03* +X113191650Y-102323100D03* +%TD*% +D36* +%TO.C,Dbk2*% +X186491650Y-103823100D03* +X190491650Y-103823100D03* +%TD*% +D43* +%TO.C,TP2*% +X127691650Y-87323100D03* +%TD*% +D26* +%TO.C,Cu4*% +X136141650Y-112323100D03* +X137691650Y-112323100D03* +%TD*% +D31* +%TO.C,C23*% +X178791650Y-51223100D03* +X180691650Y-51223100D03* +%TD*% +D47* +%TO.C,JP2*% +X140091650Y-90323100D03* +D48* +X141391650Y-90323100D03* +D49* +X142691650Y-90323100D03* +%TD*% +D70* +%TO.C,D6*% +X201341650Y-61823100D03* +X198041650Y-61823100D03* +%TD*% +D17* +%TO.C,D4G*% +X202162500Y-92100000D03* +X204037500Y-92100000D03* +%TD*% +D41* +%TO.C,L7*% +X163791650Y-118323100D03* +X171591650Y-118323100D03* +%TD*% +D71* +%TO.C,MOD1*% +X115251650Y-129583100D03* +D72* +X117791650Y-129583100D03* +X120331650Y-129583100D03* +X122871650Y-129583100D03* +X125411650Y-129583100D03* +X127951650Y-129583100D03* +X130491650Y-129583100D03* +X133031650Y-129583100D03* +X138111650Y-129583100D03* +X140651650Y-129583100D03* +X143191650Y-129583100D03* +X145731650Y-129583100D03* +X148271650Y-129583100D03* +X150811650Y-129583100D03* +X150811650Y-81323100D03* +X148271650Y-81323100D03* +X145731650Y-81323100D03* +X143191650Y-81323100D03* +X140651650Y-81323100D03* +X138111650Y-81323100D03* +X135571650Y-81323100D03* +X133031650Y-81323100D03* +X128971650Y-81323100D03* +X126431650Y-81323100D03* +X123891650Y-81323100D03* +X121351650Y-81323100D03* +X118811650Y-81323100D03* +X116271650Y-81323100D03* +X113731650Y-81323100D03* +X111191650Y-81323100D03* +X108651650Y-81323100D03* +X106111650Y-81323100D03* +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Paste.gtp b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Paste.gtp new file mode 100644 index 0000000..4f7bfbe --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Paste.gtp @@ -0,0 +1,637 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Paste,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%ADD10RoundRect,0.200000X-0.200000X-0.275000X0.200000X-0.275000X0.200000X0.275000X-0.200000X0.275000X0*% +%ADD11RoundRect,0.200000X0.200000X0.275000X-0.200000X0.275000X-0.200000X-0.275000X0.200000X-0.275000X0*% +%ADD12RoundRect,0.250000X-0.650000X1.000000X-0.650000X-1.000000X0.650000X-1.000000X0.650000X1.000000X0*% +%ADD13RoundRect,0.243750X-0.243750X-0.456250X0.243750X-0.456250X0.243750X0.456250X-0.243750X0.456250X0*% +%ADD14RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD15RoundRect,0.230000X0.230000X0.375000X-0.230000X0.375000X-0.230000X-0.375000X0.230000X-0.375000X0*% +%ADD16RoundRect,0.150000X0.825000X0.150000X-0.825000X0.150000X-0.825000X-0.150000X0.825000X-0.150000X0*% +%ADD17RoundRect,0.225000X-0.225000X-0.250000X0.225000X-0.250000X0.225000X0.250000X-0.225000X0.250000X0*% +%ADD18RoundRect,0.150000X-0.587500X-0.150000X0.587500X-0.150000X0.587500X0.150000X-0.587500X0.150000X0*% +%ADD19RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*% +%ADD20RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%ADD21R,0.500000X0.300000*% +%ADD22RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*% +%ADD23RoundRect,0.250000X-1.000000X-0.650000X1.000000X-0.650000X1.000000X0.650000X-1.000000X0.650000X0*% +%ADD24RoundRect,0.250000X-0.312500X-0.625000X0.312500X-0.625000X0.312500X0.625000X-0.312500X0.625000X0*% +%ADD25RoundRect,0.250000X-1.000000X-0.900000X1.000000X-0.900000X1.000000X0.900000X-1.000000X0.900000X0*% +%ADD26RoundRect,0.200000X-0.275000X0.200000X-0.275000X-0.200000X0.275000X-0.200000X0.275000X0.200000X0*% +%ADD27R,2.000000X3.200000*% +%ADD28RoundRect,0.087500X-0.250000X-0.087500X0.250000X-0.087500X0.250000X0.087500X-0.250000X0.087500X0*% +%ADD29R,1.250000X1.000000*% +%ADD30RoundRect,0.250000X1.100000X-0.325000X1.100000X0.325000X-1.100000X0.325000X-1.100000X-0.325000X0*% +%ADD31RoundRect,0.200000X0.275000X-0.200000X0.275000X0.200000X-0.275000X0.200000X-0.275000X-0.200000X0*% +%ADD32RoundRect,0.250000X-0.325000X-1.100000X0.325000X-1.100000X0.325000X1.100000X-0.325000X1.100000X0*% +%ADD33RoundRect,0.250000X-0.312500X-1.450000X0.312500X-1.450000X0.312500X1.450000X-0.312500X1.450000X0*% +%ADD34RoundRect,0.250000X-1.500000X-0.550000X1.500000X-0.550000X1.500000X0.550000X-1.500000X0.550000X0*% +%ADD35RoundRect,0.245000X-0.290000X-0.245000X0.290000X-0.245000X0.290000X0.245000X-0.290000X0.245000X0*% +%ADD36RoundRect,0.062500X-0.362500X-0.062500X0.362500X-0.062500X0.362500X0.062500X-0.362500X0.062500X0*% +%ADD37RoundRect,0.062500X-0.062500X-0.362500X0.062500X-0.362500X0.062500X0.362500X-0.062500X0.362500X0*% +%ADD38RoundRect,0.250000X-1.275000X-1.125000X1.275000X-1.125000X1.275000X1.125000X-1.275000X1.125000X0*% +%ADD39RoundRect,0.250000X-0.850000X-0.350000X0.850000X-0.350000X0.850000X0.350000X-0.850000X0.350000X0*% +%ADD40RoundRect,0.250000X0.550000X-1.500000X0.550000X1.500000X-0.550000X1.500000X-0.550000X-1.500000X0*% +%ADD41RoundRect,0.225000X-0.225000X-0.375000X0.225000X-0.375000X0.225000X0.375000X-0.225000X0.375000X0*% +%ADD42RoundRect,0.225000X0.225000X0.375000X-0.225000X0.375000X-0.225000X-0.375000X0.225000X-0.375000X0*% +G04 APERTURE END LIST* +D10* +%TO.C,R2*% +X166541650Y-59323100D03* +X168191650Y-59323100D03* +%TD*% +D11* +%TO.C,Rigb*% +X102191650Y-74323100D03* +X100541650Y-74323100D03* +%TD*% +D12* +%TO.C,Dbk*% +X168191650Y-63823100D03* +X168191650Y-67823100D03* +%TD*% +D10* +%TO.C,Ren2*% +X177366650Y-59323100D03* +X179016650Y-59323100D03* +%TD*% +D13* +%TO.C,DB2*% +X197316650Y-44323100D03* +X199191650Y-44323100D03* +%TD*% +D14* +%TO.C,Ccomp*% +X175841650Y-52698100D03* +X175841650Y-54248100D03* +%TD*% +D15* +%TO.C,U7*% +X198191650Y-113323100D03* +X198191650Y-111823100D03* +X197051650Y-113323100D03* +X197051650Y-111823100D03* +D16* +X200096650Y-114478100D03* +X200096650Y-113208100D03* +X200096650Y-111938100D03* +X200096650Y-110668100D03* +X195146650Y-110668100D03* +X195146650Y-111938100D03* +X195146650Y-113208100D03* +X195146650Y-114478100D03* +%TD*% +D13* +%TO.C,DB1*% +X193316650Y-44323100D03* +X195191650Y-44323100D03* +%TD*% +D17* +%TO.C,Ccomp2*% +X187191650Y-114823100D03* +X188741650Y-114823100D03* +%TD*% +D10* +%TO.C,R5*% +X91416650Y-112323100D03* +X93066650Y-112323100D03* +%TD*% +D18* +%TO.C,Q1*% +X137712500Y-59950000D03* +X137712500Y-61850000D03* +X139587500Y-60900000D03* +%TD*% +D10* +%TO.C,Rg*% +X93366650Y-94323100D03* +X95016650Y-94323100D03* +%TD*% +D19* +%TO.C,Q7*% +X110241650Y-85323100D03* +X110241650Y-86593100D03* +X110241650Y-87863100D03* +X110241650Y-89133100D03* +X115191650Y-89133100D03* +X115191650Y-87863100D03* +X115191650Y-86593100D03* +X115191650Y-85323100D03* +%TD*% +D20* +%TO.C,C34*% +X130041650Y-104323100D03* +X131941650Y-104323100D03* +%TD*% +D10* +%TO.C,R31*% +X128091650Y-112323100D03* +X129741650Y-112323100D03* +%TD*% +%TO.C,Rfreq2*% +X178691650Y-111823100D03* +X180341650Y-111823100D03* +%TD*% +%TO.C,Rmled*% +X202225000Y-84450000D03* +X203875000Y-84450000D03* +%TD*% +D21* +%TO.C,U3*% +X123491650Y-117923100D03* +X123491650Y-118723100D03* +X124891650Y-118723100D03* +X124891650Y-117923100D03* +%TD*% +D22* +%TO.C,C40*% +X179691650Y-95373100D03* +X179691650Y-97273100D03* +%TD*% +D23* +%TO.C,D2*% +X92191650Y-98323100D03* +X96191650Y-98323100D03* +%TD*% +D24* +%TO.C,RS1*% +X98729150Y-88323100D03* +X101654150Y-88323100D03* +%TD*% +D17* +%TO.C,Cu3*% +X132141650Y-112323100D03* +X133691650Y-112323100D03* +%TD*% +D10* +%TO.C,R3*% +X97041650Y-107323100D03* +X98691650Y-107323100D03* +%TD*% +%TO.C,R60*% +X178691650Y-102323100D03* +X180341650Y-102323100D03* +%TD*% +%TO.C,Rdfu*% +X110091650Y-112323100D03* +X111741650Y-112323100D03* +%TD*% +D25* +%TO.C,D10*% +X89041650Y-61823100D03* +X93341650Y-61823100D03* +%TD*% +D26* +%TO.C,Rcomp*% +X175841650Y-47798100D03* +X175841650Y-49448100D03* +%TD*% +D18* +%TO.C,Q5*% +X144512500Y-59250000D03* +X144512500Y-61150000D03* +X146387500Y-60200000D03* +%TD*% +D17* +%TO.C,C7*% +X95416650Y-116323100D03* +X96966650Y-116323100D03* +%TD*% +D10* +%TO.C,R20*% +X173041650Y-45323100D03* +X174691650Y-45323100D03* +%TD*% +D17* +%TO.C,Cbst2*% +X187141650Y-109823100D03* +X188691650Y-109823100D03* +%TD*% +D10* +%TO.C,Rts*% +X96041650Y-102323100D03* +X97691650Y-102323100D03* +%TD*% +D18* +%TO.C,Q2*% +X105254150Y-95373100D03* +X105254150Y-97273100D03* +X107129150Y-96323100D03* +%TD*% +D17* +%TO.C,Cbst*% +X167641650Y-45323100D03* +X169191650Y-45323100D03* +%TD*% +D27* +%TO.C,L6*% +X163791650Y-104823100D03* +X171591650Y-104823100D03* +%TD*% +D20* +%TO.C,C35*% +X129241650Y-96323100D03* +X131141650Y-96323100D03* +%TD*% +D28* +%TO.C,U4*% +X129599150Y-117173100D03* +X129599150Y-117673100D03* +X129599150Y-118173100D03* +X131024150Y-118173100D03* +X131024150Y-117673100D03* +X131024150Y-117173100D03* +%TD*% +D10* +%TO.C,RB3*% +X201429150Y-48323100D03* +X203079150Y-48323100D03* +%TD*% +D27* +%TO.C,L2*% +X183391650Y-47823100D03* +X191191650Y-47823100D03* +%TD*% +D17* +%TO.C,C9*% +X100816650Y-83323100D03* +X102366650Y-83323100D03* +%TD*% +D29* +%TO.C,SW4G*% +X144300000Y-135600000D03* +X152050000Y-135600000D03* +%TD*% +D15* +%TO.C,U2*% +X169786650Y-53478100D03* +X169786650Y-51978100D03* +X168646650Y-53478100D03* +X168646650Y-51978100D03* +D16* +X171691650Y-54633100D03* +X171691650Y-53363100D03* +X171691650Y-52093100D03* +X171691650Y-50823100D03* +X166741650Y-50823100D03* +X166741650Y-52093100D03* +X166741650Y-53363100D03* +X166741650Y-54633100D03* +%TD*% +D10* +%TO.C,RB4*% +X205429150Y-48323100D03* +X207079150Y-48323100D03* +%TD*% +D30* +%TO.C,C22*% +X161691650Y-46773100D03* +X161691650Y-43823100D03* +%TD*% +D10* +%TO.C,R61*% +X178691650Y-107323100D03* +X180341650Y-107323100D03* +%TD*% +D31* +%TO.C,Rcc1*% +X161425000Y-125575000D03* +X161425000Y-123925000D03* +%TD*% +D10* +%TO.C,R1*% +X163041650Y-59323100D03* +X164691650Y-59323100D03* +%TD*% +D13* +%TO.C,DB3*% +X201316650Y-44323100D03* +X203191650Y-44323100D03* +%TD*% +D22* +%TO.C,C41*% +X198691650Y-102323100D03* +X198691650Y-104223100D03* +%TD*% +D10* +%TO.C,R55*% +X101041650Y-107323100D03* +X102691650Y-107323100D03* +%TD*% +%TO.C,Rled*% +X94591650Y-112323100D03* +X96241650Y-112323100D03* +%TD*% +%TO.C,Rgs*% +X98366650Y-94323100D03* +X100016650Y-94323100D03* +%TD*% +%TO.C,R41*% +X177366650Y-64823100D03* +X179016650Y-64823100D03* +%TD*% +D13* +%TO.C,DB4*% +X205316650Y-44323100D03* +X207191650Y-44323100D03* +%TD*% +D10* +%TO.C,RB2*% +X197429150Y-48323100D03* +X199079150Y-48323100D03* +%TD*% +D31* +%TO.C,Rcc2*% +X165400000Y-125575000D03* +X165400000Y-123925000D03* +%TD*% +D13* +%TO.C,D1*% +X99254150Y-116323100D03* +X101129150Y-116323100D03* +%TD*% +D10* +%TO.C,Rtp*% +X100041650Y-102323100D03* +X101691650Y-102323100D03* +%TD*% +%TO.C,R30*% +X124091650Y-112323100D03* +X125741650Y-112323100D03* +%TD*% +%TO.C,R6*% +X97916650Y-112323100D03* +X99566650Y-112323100D03* +%TD*% +D32* +%TO.C,C32*% +X119191650Y-104323100D03* +X122141650Y-104323100D03* +%TD*% +D18* +%TO.C,Q4*% +X91816650Y-104873100D03* +X91816650Y-106773100D03* +X93691650Y-105823100D03* +%TD*% +D33* +%TO.C,F1*% +X145054150Y-46323100D03* +X149329150Y-46323100D03* +%TD*% +D10* +%TO.C,R52*% +X107541650Y-102323100D03* +X109191650Y-102323100D03* +%TD*% +%TO.C,R56*% +X105041650Y-107323100D03* +X106691650Y-107323100D03* +%TD*% +D17* +%TO.C,C11*% +X161416650Y-51223100D03* +X162966650Y-51223100D03* +%TD*% +D34* +%TO.C,C43*% +X182491650Y-122323100D03* +X187891650Y-122323100D03* +%TD*% +D18* +%TO.C,DzG*% +X98254150Y-60373100D03* +X98254150Y-62273100D03* +X100129150Y-61323100D03* +%TD*% +D26* +%TO.C,R40*% +X178366650Y-68498100D03* +X178366650Y-70148100D03* +%TD*% +D10* +%TO.C,R42*% +X114091650Y-112323100D03* +X115741650Y-112323100D03* +%TD*% +D35* +%TO.C,U6*% +X121081650Y-93103100D03* +X121081650Y-94323100D03* +X121081650Y-95543100D03* +X122401650Y-93103100D03* +X122401650Y-94323100D03* +X122401650Y-95543100D03* +D36* +X119791650Y-92823100D03* +X119791650Y-93323100D03* +X119791650Y-93823100D03* +X119791650Y-94323100D03* +X119791650Y-94823100D03* +X119791650Y-95323100D03* +X119791650Y-95823100D03* +D37* +X120741650Y-96773100D03* +X121241650Y-96773100D03* +X121741650Y-96773100D03* +X122241650Y-96773100D03* +X122741650Y-96773100D03* +D36* +X123691650Y-95823100D03* +X123691650Y-95323100D03* +X123691650Y-94823100D03* +X123691650Y-94323100D03* +X123691650Y-93823100D03* +X123691650Y-93323100D03* +X123691650Y-92823100D03* +D37* +X122741650Y-91873100D03* +X122241650Y-91873100D03* +X121741650Y-91873100D03* +X121241650Y-91873100D03* +X120741650Y-91873100D03* +%TD*% +D38* +%TO.C,Q10*% +X89776650Y-52798100D03* +X89776650Y-55848100D03* +X93126650Y-52798100D03* +X93126650Y-55848100D03* +D39* +X85151650Y-52043100D03* +X85151650Y-56603100D03* +%TD*% +D10* +%TO.C,R53*% +X134041650Y-91323100D03* +X135691650Y-91323100D03* +%TD*% +%TO.C,R51*% +X104041650Y-102323100D03* +X105691650Y-102323100D03* +%TD*% +D34* +%TO.C,C10*% +X86991650Y-71823100D03* +X92391650Y-71823100D03* +%TD*% +D10* +%TO.C,Rcomp2*% +X178866650Y-116323100D03* +X180516650Y-116323100D03* +%TD*% +%TO.C,R58*% +X134166650Y-104323100D03* +X135816650Y-104323100D03* +%TD*% +%TO.C,Rrp*% +X84366650Y-61323100D03* +X86016650Y-61323100D03* +%TD*% +D18* +%TO.C,Q6*% +X182254150Y-62373100D03* +X182254150Y-64273100D03* +X184129150Y-63323100D03* +%TD*% +D17* +%TO.C,C31*% +X111641650Y-97323100D03* +X113191650Y-97323100D03* +%TD*% +D10* +%TO.C,R21*% +X176266650Y-45323100D03* +X177916650Y-45323100D03* +%TD*% +D20* +%TO.C,C30*% +X99241650Y-98323100D03* +X101141650Y-98323100D03* +%TD*% +D10* +%TO.C,R7*% +X102091650Y-112323100D03* +X103741650Y-112323100D03* +%TD*% +D40* +%TO.C,C3*% +X154691650Y-51223100D03* +X154691650Y-45823100D03* +%TD*% +D41* +%TO.C,D5*% +X93541650Y-83323100D03* +X96841650Y-83323100D03* +%TD*% +D32* +%TO.C,C33*% +X124691650Y-104323100D03* +X127641650Y-104323100D03* +%TD*% +D31* +%TO.C,Rfreq*% +X161135950Y-56380200D03* +X161135950Y-54730200D03* +%TD*% +D11* +%TO.C,Rig*% +X102191650Y-69323100D03* +X100541650Y-69323100D03* +%TD*% +D10* +%TO.C,RB1*% +X193429150Y-48323100D03* +X195079150Y-48323100D03* +%TD*% +%TO.C,Ren1*% +X173366650Y-59323100D03* +X175016650Y-59323100D03* +%TD*% +D17* +%TO.C,C5*% +X91416650Y-116323100D03* +X92966650Y-116323100D03* +%TD*% +D10* +%TO.C,R8*% +X106091650Y-112323100D03* +X107741650Y-112323100D03* +%TD*% +D17* +%TO.C,C24*% +X118141650Y-112323100D03* +X119691650Y-112323100D03* +%TD*% +D10* +%TO.C,R54*% +X134041650Y-95323100D03* +X135691650Y-95323100D03* +%TD*% +%TO.C,R57*% +X134041650Y-99823100D03* +X135691650Y-99823100D03* +%TD*% +%TO.C,R50*% +X111541650Y-102323100D03* +X113191650Y-102323100D03* +%TD*% +D23* +%TO.C,Dbk2*% +X186491650Y-103823100D03* +X190491650Y-103823100D03* +%TD*% +D17* +%TO.C,Cu4*% +X136141650Y-112323100D03* +X137691650Y-112323100D03* +%TD*% +D20* +%TO.C,C23*% +X178791650Y-51223100D03* +X180691650Y-51223100D03* +%TD*% +D42* +%TO.C,D6*% +X201341650Y-61823100D03* +X198041650Y-61823100D03* +%TD*% +D13* +%TO.C,D4G*% +X202162500Y-92100000D03* +X204037500Y-92100000D03* +%TD*% +D27* +%TO.C,L7*% +X163791650Y-118323100D03* +X171591650Y-118323100D03* +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Silkscreen.gto b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Silkscreen.gto new file mode 100644 index 0000000..d9c2d2e --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-F_Silkscreen.gto @@ -0,0 +1,14559 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Legend,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.000000*% +%ADD11C,0.130000*% +%ADD12C,0.200000*% +%ADD13C,0.220000*% +%ADD14C,0.250000*% +%ADD15C,0.300000*% +%ADD16C,0.150000*% +%ADD17C,0.158750*% +%ADD18C,0.120000*% +G04 APERTURE END LIST* +D10* +G36* +X103463815Y-136958569D02* +G01* +X102679372Y-136958569D01* +X102679372Y-133073724D01* +X103463815Y-133073724D01* +X103463815Y-136958569D01* +G37* +G36* +X97375065Y-134698630D02* +G01* +X97393742Y-134717314D01* +X98607755Y-134717314D01* +X98626433Y-134698630D01* +X98626433Y-133223141D01* +X99429550Y-133223141D01* +X99448224Y-133241827D01* +X99448224Y-136958569D01* +X98626433Y-136958569D01* +X98626433Y-135483078D01* +X98589075Y-135445712D01* +X97431097Y-135445712D01* +X97375065Y-135501753D01* +X97375065Y-136958569D01* +X96553274Y-136958569D01* +X96553274Y-133241827D01* +X96571949Y-133223141D01* +X97375065Y-133223141D01* +X97375065Y-134698630D01* +G37* +G36* +X94778942Y-134343775D02* +G01* +X94797618Y-134605251D01* +X94816295Y-134623926D01* +X94816295Y-135090853D01* +X94722909Y-135520430D01* +X94592174Y-135763233D01* +X94405396Y-135968676D01* +X94274651Y-136062061D01* +X94106564Y-136136776D01* +X93826404Y-136136776D01* +X93602281Y-136043388D01* +X93471545Y-135912655D01* +X93396831Y-135763233D01* +X93378156Y-135669850D01* +X93751692Y-135669850D01* +X93845079Y-135781910D01* +X94031852Y-135800585D01* +X94106564Y-135763233D01* +X94349367Y-135501753D01* +X94461426Y-135240275D01* +X94480104Y-134978789D01* +X94461426Y-134960124D01* +X93975823Y-135277626D01* +X93789049Y-135445712D01* +X93751692Y-135520430D01* +X93751692Y-135669850D01* +X93378156Y-135669850D01* +X93378156Y-135520430D01* +X93378156Y-135501753D01* +X93452857Y-135296307D01* +X93714345Y-135034831D01* +X93751692Y-135034831D01* +X94013174Y-134848052D01* +X94031852Y-134810694D01* +X94069210Y-134810694D01* +X94741583Y-134287740D01* +X94778942Y-134343775D01* +G37* +G36* +X91454403Y-134642604D02* +G01* +X91809274Y-134866728D01* +X92089422Y-135090853D01* +X92126785Y-135090853D01* +X92294879Y-135277626D01* +X92369582Y-135445712D01* +X92369582Y-135707206D01* +X92276201Y-135893978D01* +X92145455Y-136024711D01* +X91865301Y-136136776D01* +X91585148Y-136118096D01* +X91323667Y-135968676D01* +X91136895Y-135744559D01* +X91024835Y-135520430D01* +X90950119Y-135221594D01* +X90944674Y-135090853D01* +X91267628Y-135090853D01* +X91286315Y-135109529D01* +X91286315Y-135202919D01* +X91342350Y-135389689D01* +X91435725Y-135557784D01* +X91622501Y-135744559D01* +X91697210Y-135781910D01* +X91827944Y-135800585D01* +X91883976Y-135781910D01* +X91996049Y-135669850D01* +X91996049Y-135483078D01* +X91977363Y-135445712D01* +X91771917Y-135258954D01* +X91286315Y-134941441D01* +X91267628Y-134960124D01* +X91267628Y-135090853D01* +X90944674Y-135090853D01* +X90939229Y-134960124D01* +X90931446Y-134773337D01* +X90950119Y-134754664D01* +X90950119Y-134474509D01* +X90968801Y-134455836D01* +X90987476Y-134269060D01* +X91024835Y-134269060D01* +X91454403Y-134642604D01* +G37* +G36* +X111737789Y-134679957D02* +G01* +X111961913Y-134810694D01* +X112073984Y-134922758D01* +X112204726Y-135165561D01* +X112242075Y-135352337D01* +X112242075Y-136958569D01* +X111457629Y-136958569D01* +X111457629Y-135576461D01* +X111382926Y-135389689D01* +X111252183Y-135258954D01* +X111140129Y-135202919D01* +X111046732Y-135202919D01* +X111028064Y-135184242D01* +X110841287Y-135221594D01* +X110729229Y-135296307D01* +X110579811Y-135464395D01* +X110542454Y-135576461D01* +X110542454Y-136958569D01* +X109758015Y-136958569D01* +X109739336Y-136939891D01* +X109739336Y-135744559D01* +X109758015Y-135651172D01* +X109739336Y-135557784D01* +X109758015Y-135483078D01* +X109739336Y-135427047D01* +X109758015Y-135408364D01* +X109758015Y-135296307D01* +X109739336Y-135277626D01* +X109739336Y-135146882D01* +X109758015Y-135128210D01* +X109739336Y-134960124D01* +X109758015Y-134866728D01* +X109739336Y-134848052D01* +X109739336Y-134698630D01* +X109758015Y-134642604D01* +X110505098Y-134642604D01* +X110542454Y-134679957D01* +X110542454Y-134885406D01* +X110561127Y-134904083D01* +X110766581Y-134717314D01* +X110953352Y-134623926D01* +X111102772Y-134586570D01* +X111382926Y-134586570D01* +X111737789Y-134679957D01* +G37* +G36* +X108357233Y-134605251D02* +G01* +X108562671Y-134623926D01* +X108768121Y-134698630D01* +X108954899Y-134810694D01* +X109085637Y-134922758D01* +X109253732Y-135146882D01* +X109328435Y-135314983D01* +X109384474Y-135520430D01* +X109403146Y-135893978D01* +X109384474Y-135912655D01* +X107703527Y-135912655D01* +X107684852Y-135931327D01* +X107703527Y-136080742D01* +X107759564Y-136192802D01* +X107927650Y-136342221D01* +X108058396Y-136379579D01* +X108095754Y-136416931D01* +X108375903Y-136416931D01* +X108413261Y-136379579D01* +X108562671Y-136342221D01* +X108805477Y-136155451D01* +X109309767Y-136416931D01* +X109347119Y-136454291D01* +X109216381Y-136641059D01* +X108936211Y-136846511D01* +X108618703Y-136977250D01* +X108431933Y-137014602D01* +X107927650Y-137014602D01* +X107610144Y-136921217D01* +X107367339Y-136771798D01* +X107049829Y-136454291D01* +X107049829Y-136416931D01* +X106919087Y-136155451D01* +X106900419Y-135968676D01* +X106881740Y-135950000D01* +X106881740Y-135669850D01* +X106937767Y-135408364D01* +X106947721Y-135389689D01* +X107722203Y-135389689D01* +X107740881Y-135483078D01* +X108618703Y-135483078D01* +X108637389Y-135464395D01* +X108600035Y-135333658D01* +X108544000Y-135258954D01* +X108394584Y-135128210D01* +X108282521Y-135090853D01* +X108077073Y-135090853D01* +X107946336Y-135128210D01* +X107796908Y-135258954D01* +X107722203Y-135389689D01* +X106947721Y-135389689D01* +X107087188Y-135128210D01* +X107348665Y-134848052D01* +X107516754Y-134735986D01* +X107722203Y-134642604D01* +X107983684Y-134586570D01* +X108338556Y-134586570D01* +X108357233Y-134605251D01* +G37* +G36* +X101540064Y-134642604D02* +G01* +X101782871Y-134754664D01* +X101913610Y-134848052D01* +X102081704Y-135016147D01* +X102231119Y-135277626D01* +X102287149Y-135483078D01* +X102305834Y-135912655D01* +X100643568Y-135912655D01* +X100624889Y-135931327D01* +X100624889Y-136043388D01* +X100699598Y-136211487D01* +X100830337Y-136323541D01* +X100942401Y-136379579D01* +X100998435Y-136379579D01* +X101035792Y-136416931D01* +X101297265Y-136416931D01* +X101334616Y-136379579D01* +X101390650Y-136379579D01* +X101540064Y-136286189D01* +X101577426Y-136286189D01* +X101708163Y-136155451D01* +X101764195Y-136192802D01* +X101820222Y-136192802D01* +X102044349Y-136323541D01* +X102081704Y-136323541D01* +X102231119Y-136416931D01* +X102249799Y-136472964D01* +X102175095Y-136585022D01* +X102006996Y-136753118D01* +X101876257Y-136846511D01* +X101558745Y-136977250D01* +X101353294Y-136995925D01* +X101334616Y-137014602D01* +X100867685Y-137014602D01* +X100849015Y-136995925D01* +X100755632Y-136995925D01* +X100624889Y-136939891D01* +X100568858Y-136939891D01* +X100326051Y-136809154D01* +X100045899Y-136547676D01* +X99877799Y-136248834D01* +X99821775Y-136024711D01* +X99803099Y-135781910D01* +X99821775Y-135763233D01* +X99840449Y-135501753D01* +X99885269Y-135389689D01* +X100643568Y-135389689D01* +X100662238Y-135483078D01* +X101521390Y-135483078D01* +X101540064Y-135464395D01* +X101540064Y-135389689D01* +X101484040Y-135277626D01* +X101353294Y-135146882D01* +X101203883Y-135090853D01* +X100979758Y-135090853D01* +X100830337Y-135146882D01* +X100736954Y-135221594D01* +X100643568Y-135389689D01* +X99885269Y-135389689D01* +X99952508Y-135221594D01* +X100101929Y-135016147D01* +X100326051Y-134810694D01* +X100512822Y-134698630D01* +X100718274Y-134623926D01* +X100905046Y-134586570D01* +X101278589Y-134586570D01* +X101540064Y-134642604D01* +G37* +G36* +X105126078Y-134605251D02* +G01* +X105238146Y-134605251D01* +X105462266Y-134679957D01* +X105705072Y-134848052D01* +X105723753Y-134829375D01* +X105742426Y-134642604D01* +X106489516Y-134642604D01* +X106526866Y-134679957D01* +X106526866Y-137201372D01* +X106452164Y-137518882D01* +X106321416Y-137743011D01* +X106134650Y-137929779D01* +X105854494Y-138097875D01* +X105518299Y-138191255D01* +X105387565Y-138191255D01* +X105368880Y-138209940D01* +X104920629Y-138209940D01* +X104901955Y-138191255D01* +X104677830Y-138172583D01* +X104472379Y-138097875D01* +X104416352Y-138097875D01* +X104192225Y-137967139D01* +X104005456Y-137780364D01* +X103930742Y-137668304D01* +X103893393Y-137556238D01* +X103930742Y-137518882D01* +X104042800Y-137481529D01* +X104472379Y-137257401D01* +X104528412Y-137257401D01* +X104696506Y-137425499D01* +X104920629Y-137518882D01* +X105238146Y-137537562D01* +X105387565Y-137500204D01* +X105574330Y-137388146D01* +X105667717Y-137276080D01* +X105723753Y-137145344D01* +X105723753Y-136846511D01* +X105705072Y-136827839D01* +X105649047Y-136846511D01* +X105555652Y-136921217D01* +X105238146Y-137014602D01* +X104771213Y-137014602D01* +X104528412Y-136958569D01* +X104266929Y-136809154D01* +X104061482Y-136603707D01* +X103893393Y-136304868D01* +X103837355Y-136099416D01* +X103837355Y-135968676D01* +X103800000Y-135950000D01* +X103800000Y-135781910D01* +X104640477Y-135781910D01* +X104677830Y-136024711D01* +X104733869Y-136136776D01* +X104920629Y-136304868D01* +X105107400Y-136360902D01* +X105387565Y-136342221D01* +X105555652Y-136248834D01* +X105705072Y-136062061D01* +X105742426Y-135950000D01* +X105723753Y-135595142D01* +X105649047Y-135464395D01* +X105518299Y-135333658D01* +X105350204Y-135258954D01* +X105070047Y-135258954D01* +X104883279Y-135333658D01* +X104696506Y-135539108D01* +X104640477Y-135781910D01* +X103800000Y-135781910D01* +X103800000Y-135688523D01* +X103837355Y-135651172D01* +X103856041Y-135445712D01* +X103930742Y-135240275D01* +X104042800Y-135053499D01* +X104322965Y-134773337D01* +X104472379Y-134679957D01* +X104696506Y-134605251D01* +X105107400Y-134586570D01* +X105126078Y-134605251D01* +G37* +G36* +X93228736Y-132233253D02* +G01* +X93359473Y-132233253D01* +X93882437Y-132363993D01* +X94386719Y-132606790D01* +X94760264Y-132868274D01* +X94853640Y-132961660D01* +X94909679Y-132980337D01* +X95264543Y-133353875D01* +X95264543Y-133391234D01* +X95451309Y-133634038D01* +X95656760Y-134007581D01* +X95806182Y-134455836D01* +X95843545Y-134642604D01* +X95843545Y-134773337D01* +X95862210Y-134792014D01* +X95862210Y-134941441D01* +X95880892Y-134960124D01* +X95880892Y-135389689D01* +X95862210Y-135408364D01* +X95843545Y-135707206D01* +X95712799Y-136192802D01* +X95582056Y-136491642D01* +X95451309Y-136715768D01* +X95152481Y-137145344D01* +X94928354Y-137369469D01* +X94648195Y-137593596D01* +X94349367Y-137799046D01* +X94031852Y-137967139D01* +X93602281Y-138116548D01* +X93508893Y-138116548D01* +X93303449Y-138172583D01* +X93172703Y-138172583D01* +X93154023Y-138191255D01* +X92425619Y-138172583D01* +X92126785Y-138116548D01* +X91827944Y-138023164D01* +X91379700Y-137817723D01* +X91155569Y-137649622D01* +X91099545Y-137630951D01* +X90931446Y-137481529D01* +X90894094Y-137481529D01* +X90464520Y-137033288D01* +X90203039Y-136603707D01* +X90165685Y-136585022D01* +X90016264Y-136230161D01* +X90016264Y-136174131D01* +X89978907Y-136118096D01* +X89904202Y-135837945D01* +X89866846Y-135464395D01* +X89848173Y-135445712D01* +X89854222Y-135221594D01* +X90221713Y-135221594D01* +X90240387Y-135240275D01* +X90240387Y-135483078D01* +X90259066Y-135501753D01* +X90259066Y-135613822D01* +X90315108Y-135893978D01* +X90539227Y-136472964D01* +X90782029Y-136827839D01* +X91099545Y-137164009D01* +X91454403Y-137425499D01* +X91491761Y-137425499D01* +X91659854Y-137537562D01* +X91958697Y-137668304D01* +X92014717Y-137668304D01* +X92276201Y-137761686D01* +X92500323Y-137780364D01* +X92518998Y-137799046D01* +X93004606Y-137817723D01* +X93023288Y-137799046D01* +X93191377Y-137799046D01* +X93415510Y-137743011D01* +X93508893Y-137743011D01* +X93882437Y-137612273D01* +X94181275Y-137462853D01* +X94442748Y-137294755D01* +X94778942Y-136977250D01* +X95115125Y-136566352D01* +X95376608Y-136006032D01* +X95469989Y-135613822D01* +X95507353Y-135072178D01* +X95488672Y-135053499D01* +X95469989Y-134735986D01* +X95395282Y-134418485D01* +X95171161Y-133895515D01* +X95021741Y-133671394D01* +X94928354Y-133596682D01* +X94834975Y-133465945D01* +X94554817Y-133185791D01* +X94386719Y-133055045D01* +X94349367Y-133055045D01* +X94162597Y-132924307D01* +X93901114Y-132793563D01* +X93583599Y-132681506D01* +X93228736Y-132606790D01* +X93097996Y-132606790D01* +X93079318Y-132588113D01* +X92612384Y-132588113D01* +X92593719Y-132606790D01* +X92294879Y-132625472D01* +X92014717Y-132718852D01* +X91958697Y-132718852D01* +X91547794Y-132905632D01* +X91510437Y-132942983D01* +X91473085Y-132942983D01* +X91155569Y-133167111D01* +X90763354Y-133559325D01* +X90557902Y-133858160D01* +X90333771Y-134381125D01* +X90240387Y-134848052D01* +X90221713Y-135221594D01* +X89854222Y-135221594D01* +X89866846Y-134754664D01* +X89960229Y-134306420D01* +X90034938Y-134082295D01* +X90090976Y-133988905D01* +X90090976Y-133932872D01* +X90184359Y-133746102D01* +X90259066Y-133671394D01* +X90352459Y-133521974D01* +X90352459Y-133484619D01* +X90501873Y-133279171D01* +X90894094Y-132886954D01* +X90950119Y-132868274D01* +X91323667Y-132588113D01* +X91566467Y-132457378D01* +X91902653Y-132326634D01* +X92033399Y-132307961D01* +X92182816Y-132251930D01* +X92612384Y-132214581D01* +X92631068Y-132195896D01* +X93060636Y-132195896D01* +X93228736Y-132233253D01* +G37* +D11* +X169492857Y-83359597D02* +X169192857Y-82931025D01* +X168978571Y-83359597D02* +X168978571Y-82459597D01* +X168978571Y-82459597D02* +X169321428Y-82459597D01* +X169321428Y-82459597D02* +X169407143Y-82502454D01* +X169407143Y-82502454D02* +X169450000Y-82545311D01* +X169450000Y-82545311D02* +X169492857Y-82631025D01* +X169492857Y-82631025D02* +X169492857Y-82759597D01* +X169492857Y-82759597D02* +X169450000Y-82845311D01* +X169450000Y-82845311D02* +X169407143Y-82888168D01* +X169407143Y-82888168D02* +X169321428Y-82931025D01* +X169321428Y-82931025D02* +X168978571Y-82931025D01* +X169878571Y-82888168D02* +X170178571Y-82888168D01* +X170307143Y-83359597D02* +X169878571Y-83359597D01* +X169878571Y-83359597D02* +X169878571Y-82459597D01* +X169878571Y-82459597D02* +X170307143Y-82459597D01* +X170650000Y-83316740D02* +X170778572Y-83359597D01* +X170778572Y-83359597D02* +X170992857Y-83359597D01* +X170992857Y-83359597D02* +X171078572Y-83316740D01* +X171078572Y-83316740D02* +X171121429Y-83273882D01* +X171121429Y-83273882D02* +X171164286Y-83188168D01* +X171164286Y-83188168D02* +X171164286Y-83102454D01* +X171164286Y-83102454D02* +X171121429Y-83016740D01* +X171121429Y-83016740D02* +X171078572Y-82973882D01* +X171078572Y-82973882D02* +X170992857Y-82931025D01* +X170992857Y-82931025D02* +X170821429Y-82888168D01* +X170821429Y-82888168D02* +X170735714Y-82845311D01* +X170735714Y-82845311D02* +X170692857Y-82802454D01* +X170692857Y-82802454D02* +X170650000Y-82716740D01* +X170650000Y-82716740D02* +X170650000Y-82631025D01* +X170650000Y-82631025D02* +X170692857Y-82545311D01* +X170692857Y-82545311D02* +X170735714Y-82502454D01* +X170735714Y-82502454D02* +X170821429Y-82459597D01* +X170821429Y-82459597D02* +X171035714Y-82459597D01* +X171035714Y-82459597D02* +X171164286Y-82502454D01* +X171550000Y-82888168D02* +X171850000Y-82888168D01* +X171978572Y-83359597D02* +X171550000Y-83359597D01* +X171550000Y-83359597D02* +X171550000Y-82459597D01* +X171550000Y-82459597D02* +X171978572Y-82459597D01* +X172235715Y-82459597D02* +X172750001Y-82459597D01* +X172492858Y-83359597D02* +X172492858Y-82459597D01* +X168957143Y-84409597D02* +X169257143Y-85309597D01* +X169257143Y-85309597D02* +X169557143Y-84409597D01* +X169642858Y-85395311D02* +X170328572Y-85395311D01* +X170542857Y-84409597D02* +X170542857Y-85138168D01* +X170542857Y-85138168D02* +X170585714Y-85223882D01* +X170585714Y-85223882D02* +X170628572Y-85266740D01* +X170628572Y-85266740D02* +X170714286Y-85309597D01* +X170714286Y-85309597D02* +X170885714Y-85309597D01* +X170885714Y-85309597D02* +X170971429Y-85266740D01* +X170971429Y-85266740D02* +X171014286Y-85223882D01* +X171014286Y-85223882D02* +X171057143Y-85138168D01* +X171057143Y-85138168D02* +X171057143Y-84409597D01* +X171442857Y-85266740D02* +X171571429Y-85309597D01* +X171571429Y-85309597D02* +X171785714Y-85309597D01* +X171785714Y-85309597D02* +X171871429Y-85266740D01* +X171871429Y-85266740D02* +X171914286Y-85223882D01* +X171914286Y-85223882D02* +X171957143Y-85138168D01* +X171957143Y-85138168D02* +X171957143Y-85052454D01* +X171957143Y-85052454D02* +X171914286Y-84966740D01* +X171914286Y-84966740D02* +X171871429Y-84923882D01* +X171871429Y-84923882D02* +X171785714Y-84881025D01* +X171785714Y-84881025D02* +X171614286Y-84838168D01* +X171614286Y-84838168D02* +X171528571Y-84795311D01* +X171528571Y-84795311D02* +X171485714Y-84752454D01* +X171485714Y-84752454D02* +X171442857Y-84666740D01* +X171442857Y-84666740D02* +X171442857Y-84581025D01* +X171442857Y-84581025D02* +X171485714Y-84495311D01* +X171485714Y-84495311D02* +X171528571Y-84452454D01* +X171528571Y-84452454D02* +X171614286Y-84409597D01* +X171614286Y-84409597D02* +X171828571Y-84409597D01* +X171828571Y-84409597D02* +X171957143Y-84452454D01* +X172642857Y-84838168D02* +X172771429Y-84881025D01* +X172771429Y-84881025D02* +X172814286Y-84923882D01* +X172814286Y-84923882D02* +X172857143Y-85009597D01* +X172857143Y-85009597D02* +X172857143Y-85138168D01* +X172857143Y-85138168D02* +X172814286Y-85223882D01* +X172814286Y-85223882D02* +X172771429Y-85266740D01* +X172771429Y-85266740D02* +X172685714Y-85309597D01* +X172685714Y-85309597D02* +X172342857Y-85309597D01* +X172342857Y-85309597D02* +X172342857Y-84409597D01* +X172342857Y-84409597D02* +X172642857Y-84409597D01* +X172642857Y-84409597D02* +X172728572Y-84452454D01* +X172728572Y-84452454D02* +X172771429Y-84495311D01* +X172771429Y-84495311D02* +X172814286Y-84581025D01* +X172814286Y-84581025D02* +X172814286Y-84666740D01* +X172814286Y-84666740D02* +X172771429Y-84752454D01* +X172771429Y-84752454D02* +X172728572Y-84795311D01* +X172728572Y-84795311D02* +X172642857Y-84838168D01* +X172642857Y-84838168D02* +X172342857Y-84838168D01* +X169257142Y-86409597D02* +X169257142Y-87138168D01* +X169257142Y-87138168D02* +X169299999Y-87223882D01* +X169299999Y-87223882D02* +X169342857Y-87266740D01* +X169342857Y-87266740D02* +X169428571Y-87309597D01* +X169428571Y-87309597D02* +X169599999Y-87309597D01* +X169599999Y-87309597D02* +X169685714Y-87266740D01* +X169685714Y-87266740D02* +X169728571Y-87223882D01* +X169728571Y-87223882D02* +X169771428Y-87138168D01* +X169771428Y-87138168D02* +X169771428Y-86409597D01* +X170157142Y-87266740D02* +X170285714Y-87309597D01* +X170285714Y-87309597D02* +X170499999Y-87309597D01* +X170499999Y-87309597D02* +X170585714Y-87266740D01* +X170585714Y-87266740D02* +X170628571Y-87223882D01* +X170628571Y-87223882D02* +X170671428Y-87138168D01* +X170671428Y-87138168D02* +X170671428Y-87052454D01* +X170671428Y-87052454D02* +X170628571Y-86966740D01* +X170628571Y-86966740D02* +X170585714Y-86923882D01* +X170585714Y-86923882D02* +X170499999Y-86881025D01* +X170499999Y-86881025D02* +X170328571Y-86838168D01* +X170328571Y-86838168D02* +X170242856Y-86795311D01* +X170242856Y-86795311D02* +X170199999Y-86752454D01* +X170199999Y-86752454D02* +X170157142Y-86666740D01* +X170157142Y-86666740D02* +X170157142Y-86581025D01* +X170157142Y-86581025D02* +X170199999Y-86495311D01* +X170199999Y-86495311D02* +X170242856Y-86452454D01* +X170242856Y-86452454D02* +X170328571Y-86409597D01* +X170328571Y-86409597D02* +X170542856Y-86409597D01* +X170542856Y-86409597D02* +X170671428Y-86452454D01* +X171357142Y-86838168D02* +X171485714Y-86881025D01* +X171485714Y-86881025D02* +X171528571Y-86923882D01* +X171528571Y-86923882D02* +X171571428Y-87009597D01* +X171571428Y-87009597D02* +X171571428Y-87138168D01* +X171571428Y-87138168D02* +X171528571Y-87223882D01* +X171528571Y-87223882D02* +X171485714Y-87266740D01* +X171485714Y-87266740D02* +X171399999Y-87309597D01* +X171399999Y-87309597D02* +X171057142Y-87309597D01* +X171057142Y-87309597D02* +X171057142Y-86409597D01* +X171057142Y-86409597D02* +X171357142Y-86409597D01* +X171357142Y-86409597D02* +X171442857Y-86452454D01* +X171442857Y-86452454D02* +X171485714Y-86495311D01* +X171485714Y-86495311D02* +X171528571Y-86581025D01* +X171528571Y-86581025D02* +X171528571Y-86666740D01* +X171528571Y-86666740D02* +X171485714Y-86752454D01* +X171485714Y-86752454D02* +X171442857Y-86795311D01* +X171442857Y-86795311D02* +X171357142Y-86838168D01* +X171357142Y-86838168D02* +X171057142Y-86838168D01* +X171957142Y-86966740D02* +X172642857Y-86966740D01* +X172299999Y-87309597D02* +X172299999Y-86623882D01* +X169507142Y-88309597D02* +X169507142Y-89038168D01* +X169507142Y-89038168D02* +X169549999Y-89123882D01* +X169549999Y-89123882D02* +X169592857Y-89166740D01* +X169592857Y-89166740D02* +X169678571Y-89209597D01* +X169678571Y-89209597D02* +X169849999Y-89209597D01* +X169849999Y-89209597D02* +X169935714Y-89166740D01* +X169935714Y-89166740D02* +X169978571Y-89123882D01* +X169978571Y-89123882D02* +X170021428Y-89038168D01* +X170021428Y-89038168D02* +X170021428Y-88309597D01* +X170407142Y-89166740D02* +X170535714Y-89209597D01* +X170535714Y-89209597D02* +X170749999Y-89209597D01* +X170749999Y-89209597D02* +X170835714Y-89166740D01* +X170835714Y-89166740D02* +X170878571Y-89123882D01* +X170878571Y-89123882D02* +X170921428Y-89038168D01* +X170921428Y-89038168D02* +X170921428Y-88952454D01* +X170921428Y-88952454D02* +X170878571Y-88866740D01* +X170878571Y-88866740D02* +X170835714Y-88823882D01* +X170835714Y-88823882D02* +X170749999Y-88781025D01* +X170749999Y-88781025D02* +X170578571Y-88738168D01* +X170578571Y-88738168D02* +X170492856Y-88695311D01* +X170492856Y-88695311D02* +X170449999Y-88652454D01* +X170449999Y-88652454D02* +X170407142Y-88566740D01* +X170407142Y-88566740D02* +X170407142Y-88481025D01* +X170407142Y-88481025D02* +X170449999Y-88395311D01* +X170449999Y-88395311D02* +X170492856Y-88352454D01* +X170492856Y-88352454D02* +X170578571Y-88309597D01* +X170578571Y-88309597D02* +X170792856Y-88309597D01* +X170792856Y-88309597D02* +X170921428Y-88352454D01* +X171607142Y-88738168D02* +X171735714Y-88781025D01* +X171735714Y-88781025D02* +X171778571Y-88823882D01* +X171778571Y-88823882D02* +X171821428Y-88909597D01* +X171821428Y-88909597D02* +X171821428Y-89038168D01* +X171821428Y-89038168D02* +X171778571Y-89123882D01* +X171778571Y-89123882D02* +X171735714Y-89166740D01* +X171735714Y-89166740D02* +X171649999Y-89209597D01* +X171649999Y-89209597D02* +X171307142Y-89209597D01* +X171307142Y-89209597D02* +X171307142Y-88309597D01* +X171307142Y-88309597D02* +X171607142Y-88309597D01* +X171607142Y-88309597D02* +X171692857Y-88352454D01* +X171692857Y-88352454D02* +X171735714Y-88395311D01* +X171735714Y-88395311D02* +X171778571Y-88481025D01* +X171778571Y-88481025D02* +X171778571Y-88566740D01* +X171778571Y-88566740D02* +X171735714Y-88652454D01* +X171735714Y-88652454D02* +X171692857Y-88695311D01* +X171692857Y-88695311D02* +X171607142Y-88738168D01* +X171607142Y-88738168D02* +X171307142Y-88738168D01* +X172207142Y-88866740D02* +X172892857Y-88866740D01* +X170185714Y-74329597D02* +X170742857Y-74329597D01* +X170742857Y-74329597D02* +X170442857Y-74672454D01* +X170442857Y-74672454D02* +X170571428Y-74672454D01* +X170571428Y-74672454D02* +X170657143Y-74715311D01* +X170657143Y-74715311D02* +X170700000Y-74758168D01* +X170700000Y-74758168D02* +X170742857Y-74843882D01* +X170742857Y-74843882D02* +X170742857Y-75058168D01* +X170742857Y-75058168D02* +X170700000Y-75143882D01* +X170700000Y-75143882D02* +X170657143Y-75186740D01* +X170657143Y-75186740D02* +X170571428Y-75229597D01* +X170571428Y-75229597D02* +X170314285Y-75229597D01* +X170314285Y-75229597D02* +X170228571Y-75186740D01* +X170228571Y-75186740D02* +X170185714Y-75143882D01* +X171000000Y-74329597D02* +X171300000Y-75229597D01* +X171300000Y-75229597D02* +X171600000Y-74329597D01* +X171814286Y-74329597D02* +X172371429Y-74329597D01* +X172371429Y-74329597D02* +X172071429Y-74672454D01* +X172071429Y-74672454D02* +X172200000Y-74672454D01* +X172200000Y-74672454D02* +X172285715Y-74715311D01* +X172285715Y-74715311D02* +X172328572Y-74758168D01* +X172328572Y-74758168D02* +X172371429Y-74843882D01* +X172371429Y-74843882D02* +X172371429Y-75058168D01* +X172371429Y-75058168D02* +X172328572Y-75143882D01* +X172328572Y-75143882D02* +X172285715Y-75186740D01* +X172285715Y-75186740D02* +X172200000Y-75229597D01* +X172200000Y-75229597D02* +X171942857Y-75229597D01* +X171942857Y-75229597D02* +X171857143Y-75186740D01* +X171857143Y-75186740D02* +X171814286Y-75143882D01* +X170614286Y-92372454D02* +X170528572Y-92329597D01* +X170528572Y-92329597D02* +X170400000Y-92329597D01* +X170400000Y-92329597D02* +X170271429Y-92372454D01* +X170271429Y-92372454D02* +X170185714Y-92458168D01* +X170185714Y-92458168D02* +X170142857Y-92543882D01* +X170142857Y-92543882D02* +X170100000Y-92715311D01* +X170100000Y-92715311D02* +X170100000Y-92843882D01* +X170100000Y-92843882D02* +X170142857Y-93015311D01* +X170142857Y-93015311D02* +X170185714Y-93101025D01* +X170185714Y-93101025D02* +X170271429Y-93186740D01* +X170271429Y-93186740D02* +X170400000Y-93229597D01* +X170400000Y-93229597D02* +X170485714Y-93229597D01* +X170485714Y-93229597D02* +X170614286Y-93186740D01* +X170614286Y-93186740D02* +X170657143Y-93143882D01* +X170657143Y-93143882D02* +X170657143Y-92843882D01* +X170657143Y-92843882D02* +X170485714Y-92843882D01* +X171042857Y-93229597D02* +X171042857Y-92329597D01* +X171042857Y-92329597D02* +X171557143Y-93229597D01* +X171557143Y-93229597D02* +X171557143Y-92329597D01* +X171985714Y-93229597D02* +X171985714Y-92329597D01* +X171985714Y-92329597D02* +X172200000Y-92329597D01* +X172200000Y-92329597D02* +X172328571Y-92372454D01* +X172328571Y-92372454D02* +X172414286Y-92458168D01* +X172414286Y-92458168D02* +X172457143Y-92543882D01* +X172457143Y-92543882D02* +X172500000Y-92715311D01* +X172500000Y-92715311D02* +X172500000Y-92843882D01* +X172500000Y-92843882D02* +X172457143Y-93015311D01* +X172457143Y-93015311D02* +X172414286Y-93101025D01* +X172414286Y-93101025D02* +X172328571Y-93186740D01* +X172328571Y-93186740D02* +X172200000Y-93229597D01* +X172200000Y-93229597D02* +X171985714Y-93229597D01* +X170714286Y-80452454D02* +X170628572Y-80409597D01* +X170628572Y-80409597D02* +X170500000Y-80409597D01* +X170500000Y-80409597D02* +X170371429Y-80452454D01* +X170371429Y-80452454D02* +X170285714Y-80538168D01* +X170285714Y-80538168D02* +X170242857Y-80623882D01* +X170242857Y-80623882D02* +X170200000Y-80795311D01* +X170200000Y-80795311D02* +X170200000Y-80923882D01* +X170200000Y-80923882D02* +X170242857Y-81095311D01* +X170242857Y-81095311D02* +X170285714Y-81181025D01* +X170285714Y-81181025D02* +X170371429Y-81266740D01* +X170371429Y-81266740D02* +X170500000Y-81309597D01* +X170500000Y-81309597D02* +X170585714Y-81309597D01* +X170585714Y-81309597D02* +X170714286Y-81266740D01* +X170714286Y-81266740D02* +X170757143Y-81223882D01* +X170757143Y-81223882D02* +X170757143Y-80923882D01* +X170757143Y-80923882D02* +X170585714Y-80923882D01* +X171142857Y-81309597D02* +X171142857Y-80409597D01* +X171142857Y-80409597D02* +X171657143Y-81309597D01* +X171657143Y-81309597D02* +X171657143Y-80409597D01* +X172085714Y-81309597D02* +X172085714Y-80409597D01* +X172085714Y-80409597D02* +X172300000Y-80409597D01* +X172300000Y-80409597D02* +X172428571Y-80452454D01* +X172428571Y-80452454D02* +X172514286Y-80538168D01* +X172514286Y-80538168D02* +X172557143Y-80623882D01* +X172557143Y-80623882D02* +X172600000Y-80795311D01* +X172600000Y-80795311D02* +X172600000Y-80923882D01* +X172600000Y-80923882D02* +X172557143Y-81095311D01* +X172557143Y-81095311D02* +X172514286Y-81181025D01* +X172514286Y-81181025D02* +X172428571Y-81266740D01* +X172428571Y-81266740D02* +X172300000Y-81309597D01* +X172300000Y-81309597D02* +X172085714Y-81309597D01* +X171500000Y-79229597D02* +X171200000Y-78801025D01* +X170985714Y-79229597D02* +X170985714Y-78329597D01* +X170985714Y-78329597D02* +X171328571Y-78329597D01* +X171328571Y-78329597D02* +X171414286Y-78372454D01* +X171414286Y-78372454D02* +X171457143Y-78415311D01* +X171457143Y-78415311D02* +X171500000Y-78501025D01* +X171500000Y-78501025D02* +X171500000Y-78629597D01* +X171500000Y-78629597D02* +X171457143Y-78715311D01* +X171457143Y-78715311D02* +X171414286Y-78758168D01* +X171414286Y-78758168D02* +X171328571Y-78801025D01* +X171328571Y-78801025D02* +X170985714Y-78801025D01* +X171800000Y-78329597D02* +X172400000Y-79229597D01* +X172400000Y-78329597D02* +X171800000Y-79229597D01* +X171014286Y-76409597D02* +X171528572Y-76409597D01* +X171271429Y-77309597D02* +X171271429Y-76409597D01* +X171742857Y-76409597D02* +X172342857Y-77309597D01* +X172342857Y-76409597D02* +X171742857Y-77309597D01* +X198364286Y-84502454D02* +X198278572Y-84459597D01* +X198278572Y-84459597D02* +X198150000Y-84459597D01* +X198150000Y-84459597D02* +X198021429Y-84502454D01* +X198021429Y-84502454D02* +X197935714Y-84588168D01* +X197935714Y-84588168D02* +X197892857Y-84673882D01* +X197892857Y-84673882D02* +X197850000Y-84845311D01* +X197850000Y-84845311D02* +X197850000Y-84973882D01* +X197850000Y-84973882D02* +X197892857Y-85145311D01* +X197892857Y-85145311D02* +X197935714Y-85231025D01* +X197935714Y-85231025D02* +X198021429Y-85316740D01* +X198021429Y-85316740D02* +X198150000Y-85359597D01* +X198150000Y-85359597D02* +X198235714Y-85359597D01* +X198235714Y-85359597D02* +X198364286Y-85316740D01* +X198364286Y-85316740D02* +X198407143Y-85273882D01* +X198407143Y-85273882D02* +X198407143Y-84973882D01* +X198407143Y-84973882D02* +X198235714Y-84973882D01* +X198792857Y-85359597D02* +X198792857Y-84459597D01* +X198792857Y-84459597D02* +X199307143Y-85359597D01* +X199307143Y-85359597D02* +X199307143Y-84459597D01* +X199735714Y-85359597D02* +X199735714Y-84459597D01* +X199735714Y-84459597D02* +X199950000Y-84459597D01* +X199950000Y-84459597D02* +X200078571Y-84502454D01* +X200078571Y-84502454D02* +X200164286Y-84588168D01* +X200164286Y-84588168D02* +X200207143Y-84673882D01* +X200207143Y-84673882D02* +X200250000Y-84845311D01* +X200250000Y-84845311D02* +X200250000Y-84973882D01* +X200250000Y-84973882D02* +X200207143Y-85145311D01* +X200207143Y-85145311D02* +X200164286Y-85231025D01* +X200164286Y-85231025D02* +X200078571Y-85316740D01* +X200078571Y-85316740D02* +X199950000Y-85359597D01* +X199950000Y-85359597D02* +X199735714Y-85359597D01* +X198564286Y-92402454D02* +X198478572Y-92359597D01* +X198478572Y-92359597D02* +X198350000Y-92359597D01* +X198350000Y-92359597D02* +X198221429Y-92402454D01* +X198221429Y-92402454D02* +X198135714Y-92488168D01* +X198135714Y-92488168D02* +X198092857Y-92573882D01* +X198092857Y-92573882D02* +X198050000Y-92745311D01* +X198050000Y-92745311D02* +X198050000Y-92873882D01* +X198050000Y-92873882D02* +X198092857Y-93045311D01* +X198092857Y-93045311D02* +X198135714Y-93131025D01* +X198135714Y-93131025D02* +X198221429Y-93216740D01* +X198221429Y-93216740D02* +X198350000Y-93259597D01* +X198350000Y-93259597D02* +X198435714Y-93259597D01* +X198435714Y-93259597D02* +X198564286Y-93216740D01* +X198564286Y-93216740D02* +X198607143Y-93173882D01* +X198607143Y-93173882D02* +X198607143Y-92873882D01* +X198607143Y-92873882D02* +X198435714Y-92873882D01* +X198992857Y-93259597D02* +X198992857Y-92359597D01* +X198992857Y-92359597D02* +X199507143Y-93259597D01* +X199507143Y-93259597D02* +X199507143Y-92359597D01* +X199935714Y-93259597D02* +X199935714Y-92359597D01* +X199935714Y-92359597D02* +X200150000Y-92359597D01* +X200150000Y-92359597D02* +X200278571Y-92402454D01* +X200278571Y-92402454D02* +X200364286Y-92488168D01* +X200364286Y-92488168D02* +X200407143Y-92573882D01* +X200407143Y-92573882D02* +X200450000Y-92745311D01* +X200450000Y-92745311D02* +X200450000Y-92873882D01* +X200450000Y-92873882D02* +X200407143Y-93045311D01* +X200407143Y-93045311D02* +X200364286Y-93131025D01* +X200364286Y-93131025D02* +X200278571Y-93216740D01* +X200278571Y-93216740D02* +X200150000Y-93259597D01* +X200150000Y-93259597D02* +X199935714Y-93259597D01* +X197957142Y-86309597D02* +X198257142Y-87209597D01* +X198257142Y-87209597D02* +X198557142Y-86309597D01* +X199371428Y-87209597D02* +X199071428Y-86781025D01* +X198857142Y-87209597D02* +X198857142Y-86309597D01* +X198857142Y-86309597D02* +X199199999Y-86309597D01* +X199199999Y-86309597D02* +X199285714Y-86352454D01* +X199285714Y-86352454D02* +X199328571Y-86395311D01* +X199328571Y-86395311D02* +X199371428Y-86481025D01* +X199371428Y-86481025D02* +X199371428Y-86609597D01* +X199371428Y-86609597D02* +X199328571Y-86695311D01* +X199328571Y-86695311D02* +X199285714Y-86738168D01* +X199285714Y-86738168D02* +X199199999Y-86781025D01* +X199199999Y-86781025D02* +X198857142Y-86781025D01* +X199757142Y-86738168D02* +X200057142Y-86738168D01* +X200185714Y-87209597D02* +X199757142Y-87209597D01* +X199757142Y-87209597D02* +X199757142Y-86309597D01* +X199757142Y-86309597D02* +X200185714Y-86309597D01* +X200871428Y-86738168D02* +X200571428Y-86738168D01* +X200571428Y-87209597D02* +X200571428Y-86309597D01* +X200571428Y-86309597D02* +X201000000Y-86309597D01* +X107128168Y-77628571D02* +X107171025Y-77499999D01* +X107171025Y-77499999D02* +X107213882Y-77457142D01* +X107213882Y-77457142D02* +X107299597Y-77414285D01* +X107299597Y-77414285D02* +X107428168Y-77414285D01* +X107428168Y-77414285D02* +X107513882Y-77457142D01* +X107513882Y-77457142D02* +X107556740Y-77499999D01* +X107556740Y-77499999D02* +X107599597Y-77585714D01* +X107599597Y-77585714D02* +X107599597Y-77928571D01* +X107599597Y-77928571D02* +X106699597Y-77928571D01* +X106699597Y-77928571D02* +X106699597Y-77628571D01* +X106699597Y-77628571D02* +X106742454Y-77542857D01* +X106742454Y-77542857D02* +X106785311Y-77499999D01* +X106785311Y-77499999D02* +X106871025Y-77457142D01* +X106871025Y-77457142D02* +X106956740Y-77457142D01* +X106956740Y-77457142D02* +X107042454Y-77499999D01* +X107042454Y-77499999D02* +X107085311Y-77542857D01* +X107085311Y-77542857D02* +X107128168Y-77628571D01* +X107128168Y-77628571D02* +X107128168Y-77928571D01* +X107599597Y-76599999D02* +X107599597Y-77028571D01* +X107599597Y-77028571D02* +X106699597Y-77028571D01* +X107599597Y-75828571D02* +X107599597Y-76342857D01* +X107599597Y-76085714D02* +X106699597Y-76085714D01* +X106699597Y-76085714D02* +X106828168Y-76171428D01* +X106828168Y-76171428D02* +X106913882Y-76257143D01* +X106913882Y-76257143D02* +X106956740Y-76342857D01* +X109668168Y-77628571D02* +X109711025Y-77499999D01* +X109711025Y-77499999D02* +X109753882Y-77457142D01* +X109753882Y-77457142D02* +X109839597Y-77414285D01* +X109839597Y-77414285D02* +X109968168Y-77414285D01* +X109968168Y-77414285D02* +X110053882Y-77457142D01* +X110053882Y-77457142D02* +X110096740Y-77499999D01* +X110096740Y-77499999D02* +X110139597Y-77585714D01* +X110139597Y-77585714D02* +X110139597Y-77928571D01* +X110139597Y-77928571D02* +X109239597Y-77928571D01* +X109239597Y-77928571D02* +X109239597Y-77628571D01* +X109239597Y-77628571D02* +X109282454Y-77542857D01* +X109282454Y-77542857D02* +X109325311Y-77499999D01* +X109325311Y-77499999D02* +X109411025Y-77457142D01* +X109411025Y-77457142D02* +X109496740Y-77457142D01* +X109496740Y-77457142D02* +X109582454Y-77499999D01* +X109582454Y-77499999D02* +X109625311Y-77542857D01* +X109625311Y-77542857D02* +X109668168Y-77628571D01* +X109668168Y-77628571D02* +X109668168Y-77928571D01* +X110139597Y-76599999D02* +X110139597Y-77028571D01* +X110139597Y-77028571D02* +X109239597Y-77028571D01* +X109325311Y-76342857D02* +X109282454Y-76300000D01* +X109282454Y-76300000D02* +X109239597Y-76214286D01* +X109239597Y-76214286D02* +X109239597Y-76000000D01* +X109239597Y-76000000D02* +X109282454Y-75914286D01* +X109282454Y-75914286D02* +X109325311Y-75871428D01* +X109325311Y-75871428D02* +X109411025Y-75828571D01* +X109411025Y-75828571D02* +X109496740Y-75828571D01* +X109496740Y-75828571D02* +X109625311Y-75871428D01* +X109625311Y-75871428D02* +X110139597Y-76385714D01* +X110139597Y-76385714D02* +X110139597Y-75828571D01* +X112208168Y-77628571D02* +X112251025Y-77499999D01* +X112251025Y-77499999D02* +X112293882Y-77457142D01* +X112293882Y-77457142D02* +X112379597Y-77414285D01* +X112379597Y-77414285D02* +X112508168Y-77414285D01* +X112508168Y-77414285D02* +X112593882Y-77457142D01* +X112593882Y-77457142D02* +X112636740Y-77499999D01* +X112636740Y-77499999D02* +X112679597Y-77585714D01* +X112679597Y-77585714D02* +X112679597Y-77928571D01* +X112679597Y-77928571D02* +X111779597Y-77928571D01* +X111779597Y-77928571D02* +X111779597Y-77628571D01* +X111779597Y-77628571D02* +X111822454Y-77542857D01* +X111822454Y-77542857D02* +X111865311Y-77499999D01* +X111865311Y-77499999D02* +X111951025Y-77457142D01* +X111951025Y-77457142D02* +X112036740Y-77457142D01* +X112036740Y-77457142D02* +X112122454Y-77499999D01* +X112122454Y-77499999D02* +X112165311Y-77542857D01* +X112165311Y-77542857D02* +X112208168Y-77628571D01* +X112208168Y-77628571D02* +X112208168Y-77928571D01* +X112679597Y-76599999D02* +X112679597Y-77028571D01* +X112679597Y-77028571D02* +X111779597Y-77028571D01* +X111779597Y-76385714D02* +X111779597Y-75828571D01* +X111779597Y-75828571D02* +X112122454Y-76128571D01* +X112122454Y-76128571D02* +X112122454Y-76000000D01* +X112122454Y-76000000D02* +X112165311Y-75914286D01* +X112165311Y-75914286D02* +X112208168Y-75871428D01* +X112208168Y-75871428D02* +X112293882Y-75828571D01* +X112293882Y-75828571D02* +X112508168Y-75828571D01* +X112508168Y-75828571D02* +X112593882Y-75871428D01* +X112593882Y-75871428D02* +X112636740Y-75914286D01* +X112636740Y-75914286D02* +X112679597Y-76000000D01* +X112679597Y-76000000D02* +X112679597Y-76257143D01* +X112679597Y-76257143D02* +X112636740Y-76342857D01* +X112636740Y-76342857D02* +X112593882Y-76385714D01* +X113282454Y-79835713D02* +X113239597Y-79921428D01* +X113239597Y-79921428D02* +X113239597Y-80049999D01* +X113239597Y-80049999D02* +X113282454Y-80178570D01* +X113282454Y-80178570D02* +X113368168Y-80264285D01* +X113368168Y-80264285D02* +X113453882Y-80307142D01* +X113453882Y-80307142D02* +X113625311Y-80349999D01* +X113625311Y-80349999D02* +X113753882Y-80349999D01* +X113753882Y-80349999D02* +X113925311Y-80307142D01* +X113925311Y-80307142D02* +X114011025Y-80264285D01* +X114011025Y-80264285D02* +X114096740Y-80178570D01* +X114096740Y-80178570D02* +X114139597Y-80049999D01* +X114139597Y-80049999D02* +X114139597Y-79964285D01* +X114139597Y-79964285D02* +X114096740Y-79835713D01* +X114096740Y-79835713D02* +X114053882Y-79792856D01* +X114053882Y-79792856D02* +X113753882Y-79792856D01* +X113753882Y-79792856D02* +X113753882Y-79964285D01* +X114139597Y-79407142D02* +X113239597Y-79407142D01* +X113239597Y-79407142D02* +X114139597Y-78892856D01* +X114139597Y-78892856D02* +X113239597Y-78892856D01* +X114139597Y-78464285D02* +X113239597Y-78464285D01* +X113239597Y-78464285D02* +X113239597Y-78249999D01* +X113239597Y-78249999D02* +X113282454Y-78121428D01* +X113282454Y-78121428D02* +X113368168Y-78035713D01* +X113368168Y-78035713D02* +X113453882Y-77992856D01* +X113453882Y-77992856D02* +X113625311Y-77949999D01* +X113625311Y-77949999D02* +X113753882Y-77949999D01* +X113753882Y-77949999D02* +X113925311Y-77992856D01* +X113925311Y-77992856D02* +X114011025Y-78035713D01* +X114011025Y-78035713D02* +X114096740Y-78121428D01* +X114096740Y-78121428D02* +X114139597Y-78249999D01* +X114139597Y-78249999D02* +X114139597Y-78464285D01* +X114748168Y-77628571D02* +X114791025Y-77499999D01* +X114791025Y-77499999D02* +X114833882Y-77457142D01* +X114833882Y-77457142D02* +X114919597Y-77414285D01* +X114919597Y-77414285D02* +X115048168Y-77414285D01* +X115048168Y-77414285D02* +X115133882Y-77457142D01* +X115133882Y-77457142D02* +X115176740Y-77499999D01* +X115176740Y-77499999D02* +X115219597Y-77585714D01* +X115219597Y-77585714D02* +X115219597Y-77928571D01* +X115219597Y-77928571D02* +X114319597Y-77928571D01* +X114319597Y-77928571D02* +X114319597Y-77628571D01* +X114319597Y-77628571D02* +X114362454Y-77542857D01* +X114362454Y-77542857D02* +X114405311Y-77499999D01* +X114405311Y-77499999D02* +X114491025Y-77457142D01* +X114491025Y-77457142D02* +X114576740Y-77457142D01* +X114576740Y-77457142D02* +X114662454Y-77499999D01* +X114662454Y-77499999D02* +X114705311Y-77542857D01* +X114705311Y-77542857D02* +X114748168Y-77628571D01* +X114748168Y-77628571D02* +X114748168Y-77928571D01* +X115219597Y-76599999D02* +X115219597Y-77028571D01* +X115219597Y-77028571D02* +X114319597Y-77028571D01* +X114619597Y-75914286D02* +X115219597Y-75914286D01* +X114276740Y-76128571D02* +X114919597Y-76342857D01* +X114919597Y-76342857D02* +X114919597Y-75785714D01* +X117759597Y-54528571D02* +X116859597Y-54528571D01* +X116859597Y-54528571D02* +X117759597Y-54014285D01* +X117759597Y-54014285D02* +X116859597Y-54014285D01* +X117759597Y-53071428D02* +X117331025Y-53371428D01* +X117759597Y-53585714D02* +X116859597Y-53585714D01* +X116859597Y-53585714D02* +X116859597Y-53242857D01* +X116859597Y-53242857D02* +X116902454Y-53157142D01* +X116902454Y-53157142D02* +X116945311Y-53114285D01* +X116945311Y-53114285D02* +X117031025Y-53071428D01* +X117031025Y-53071428D02* +X117159597Y-53071428D01* +X117159597Y-53071428D02* +X117245311Y-53114285D01* +X117245311Y-53114285D02* +X117288168Y-53157142D01* +X117288168Y-53157142D02* +X117331025Y-53242857D01* +X117331025Y-53242857D02* +X117331025Y-53585714D01* +X117716740Y-52728571D02* +X117759597Y-52600000D01* +X117759597Y-52600000D02* +X117759597Y-52385714D01* +X117759597Y-52385714D02* +X117716740Y-52300000D01* +X117716740Y-52300000D02* +X117673882Y-52257142D01* +X117673882Y-52257142D02* +X117588168Y-52214285D01* +X117588168Y-52214285D02* +X117502454Y-52214285D01* +X117502454Y-52214285D02* +X117416740Y-52257142D01* +X117416740Y-52257142D02* +X117373882Y-52300000D01* +X117373882Y-52300000D02* +X117331025Y-52385714D01* +X117331025Y-52385714D02* +X117288168Y-52557142D01* +X117288168Y-52557142D02* +X117245311Y-52642857D01* +X117245311Y-52642857D02* +X117202454Y-52685714D01* +X117202454Y-52685714D02* +X117116740Y-52728571D01* +X117116740Y-52728571D02* +X117031025Y-52728571D01* +X117031025Y-52728571D02* +X116945311Y-52685714D01* +X116945311Y-52685714D02* +X116902454Y-52642857D01* +X116902454Y-52642857D02* +X116859597Y-52557142D01* +X116859597Y-52557142D02* +X116859597Y-52342857D01* +X116859597Y-52342857D02* +X116902454Y-52214285D01* +X116859597Y-51957142D02* +X116859597Y-51442857D01* +X117759597Y-51699999D02* +X116859597Y-51699999D01* +X117773882Y-78471428D02* +X117816740Y-78514285D01* +X117816740Y-78514285D02* +X117859597Y-78642857D01* +X117859597Y-78642857D02* +X117859597Y-78728571D01* +X117859597Y-78728571D02* +X117816740Y-78857142D01* +X117816740Y-78857142D02* +X117731025Y-78942857D01* +X117731025Y-78942857D02* +X117645311Y-78985714D01* +X117645311Y-78985714D02* +X117473882Y-79028571D01* +X117473882Y-79028571D02* +X117345311Y-79028571D01* +X117345311Y-79028571D02* +X117173882Y-78985714D01* +X117173882Y-78985714D02* +X117088168Y-78942857D01* +X117088168Y-78942857D02* +X117002454Y-78857142D01* +X117002454Y-78857142D02* +X116959597Y-78728571D01* +X116959597Y-78728571D02* +X116959597Y-78642857D01* +X116959597Y-78642857D02* +X117002454Y-78514285D01* +X117002454Y-78514285D02* +X117045311Y-78471428D01* +X117859597Y-78085714D02* +X116959597Y-78085714D01* +X117388168Y-78085714D02* +X117388168Y-77571428D01* +X117859597Y-77571428D02* +X116959597Y-77571428D01* +X117388168Y-77142857D02* +X117388168Y-76842857D01* +X117859597Y-76714285D02* +X117859597Y-77142857D01* +X117859597Y-77142857D02* +X116959597Y-77142857D01* +X116959597Y-77142857D02* +X116959597Y-76714285D01* +X117859597Y-76328571D02* +X116959597Y-76328571D01* +X116959597Y-76328571D02* +X117859597Y-75814285D01* +X117859597Y-75814285D02* +X116959597Y-75814285D01* +X117299597Y-132714285D02* +X117299597Y-132157142D01* +X117299597Y-132157142D02* +X117642454Y-132457142D01* +X117642454Y-132457142D02* +X117642454Y-132328571D01* +X117642454Y-132328571D02* +X117685311Y-132242857D01* +X117685311Y-132242857D02* +X117728168Y-132199999D01* +X117728168Y-132199999D02* +X117813882Y-132157142D01* +X117813882Y-132157142D02* +X118028168Y-132157142D01* +X118028168Y-132157142D02* +X118113882Y-132199999D01* +X118113882Y-132199999D02* +X118156740Y-132242857D01* +X118156740Y-132242857D02* +X118199597Y-132328571D01* +X118199597Y-132328571D02* +X118199597Y-132585714D01* +X118199597Y-132585714D02* +X118156740Y-132671428D01* +X118156740Y-132671428D02* +X118113882Y-132714285D01* +X117299597Y-131899999D02* +X118199597Y-131599999D01* +X118199597Y-131599999D02* +X117299597Y-131299999D01* +X117299597Y-131085713D02* +X117299597Y-130528570D01* +X117299597Y-130528570D02* +X117642454Y-130828570D01* +X117642454Y-130828570D02* +X117642454Y-130699999D01* +X117642454Y-130699999D02* +X117685311Y-130614285D01* +X117685311Y-130614285D02* +X117728168Y-130571427D01* +X117728168Y-130571427D02* +X117813882Y-130528570D01* +X117813882Y-130528570D02* +X118028168Y-130528570D01* +X118028168Y-130528570D02* +X118113882Y-130571427D01* +X118113882Y-130571427D02* +X118156740Y-130614285D01* +X118156740Y-130614285D02* +X118199597Y-130699999D01* +X118199597Y-130699999D02* +X118199597Y-130957142D01* +X118199597Y-130957142D02* +X118156740Y-131042856D01* +X118156740Y-131042856D02* +X118113882Y-131085713D01* +X119359597Y-78935714D02* +X120088168Y-78935714D01* +X120088168Y-78935714D02* +X120173882Y-78892857D01* +X120173882Y-78892857D02* +X120216740Y-78850000D01* +X120216740Y-78850000D02* +X120259597Y-78764285D01* +X120259597Y-78764285D02* +X120259597Y-78592857D01* +X120259597Y-78592857D02* +X120216740Y-78507142D01* +X120216740Y-78507142D02* +X120173882Y-78464285D01* +X120173882Y-78464285D02* +X120088168Y-78421428D01* +X120088168Y-78421428D02* +X119359597Y-78421428D01* +X119916740Y-77992857D02* +X119916740Y-77307143D01* +X119359597Y-77007142D02* +X119359597Y-76492857D01* +X120259597Y-76749999D02* +X119359597Y-76749999D01* +X119359597Y-76278571D02* +X120259597Y-75678571D01* +X119359597Y-75678571D02* +X120259597Y-76278571D01* +X119838168Y-54214285D02* +X119881025Y-54085713D01* +X119881025Y-54085713D02* +X119923882Y-54042856D01* +X119923882Y-54042856D02* +X120009597Y-53999999D01* +X120009597Y-53999999D02* +X120138168Y-53999999D01* +X120138168Y-53999999D02* +X120223882Y-54042856D01* +X120223882Y-54042856D02* +X120266740Y-54085713D01* +X120266740Y-54085713D02* +X120309597Y-54171428D01* +X120309597Y-54171428D02* +X120309597Y-54514285D01* +X120309597Y-54514285D02* +X119409597Y-54514285D01* +X119409597Y-54514285D02* +X119409597Y-54214285D01* +X119409597Y-54214285D02* +X119452454Y-54128571D01* +X119452454Y-54128571D02* +X119495311Y-54085713D01* +X119495311Y-54085713D02* +X119581025Y-54042856D01* +X119581025Y-54042856D02* +X119666740Y-54042856D01* +X119666740Y-54042856D02* +X119752454Y-54085713D01* +X119752454Y-54085713D02* +X119795311Y-54128571D01* +X119795311Y-54128571D02* +X119838168Y-54214285D01* +X119838168Y-54214285D02* +X119838168Y-54514285D01* +X120266740Y-53657142D02* +X120309597Y-53528571D01* +X120309597Y-53528571D02* +X120309597Y-53314285D01* +X120309597Y-53314285D02* +X120266740Y-53228571D01* +X120266740Y-53228571D02* +X120223882Y-53185713D01* +X120223882Y-53185713D02* +X120138168Y-53142856D01* +X120138168Y-53142856D02* +X120052454Y-53142856D01* +X120052454Y-53142856D02* +X119966740Y-53185713D01* +X119966740Y-53185713D02* +X119923882Y-53228571D01* +X119923882Y-53228571D02* +X119881025Y-53314285D01* +X119881025Y-53314285D02* +X119838168Y-53485713D01* +X119838168Y-53485713D02* +X119795311Y-53571428D01* +X119795311Y-53571428D02* +X119752454Y-53614285D01* +X119752454Y-53614285D02* +X119666740Y-53657142D01* +X119666740Y-53657142D02* +X119581025Y-53657142D01* +X119581025Y-53657142D02* +X119495311Y-53614285D01* +X119495311Y-53614285D02* +X119452454Y-53571428D01* +X119452454Y-53571428D02* +X119409597Y-53485713D01* +X119409597Y-53485713D02* +X119409597Y-53271428D01* +X119409597Y-53271428D02* +X119452454Y-53142856D01* +X120309597Y-52757142D02* +X119409597Y-52757142D01* +X119409597Y-52757142D02* +X120309597Y-52242856D01* +X120309597Y-52242856D02* +X119409597Y-52242856D01* +X120266740Y-51857142D02* +X120309597Y-51728571D01* +X120309597Y-51728571D02* +X120309597Y-51514285D01* +X120309597Y-51514285D02* +X120266740Y-51428571D01* +X120266740Y-51428571D02* +X120223882Y-51385713D01* +X120223882Y-51385713D02* +X120138168Y-51342856D01* +X120138168Y-51342856D02* +X120052454Y-51342856D01* +X120052454Y-51342856D02* +X119966740Y-51385713D01* +X119966740Y-51385713D02* +X119923882Y-51428571D01* +X119923882Y-51428571D02* +X119881025Y-51514285D01* +X119881025Y-51514285D02* +X119838168Y-51685713D01* +X119838168Y-51685713D02* +X119795311Y-51771428D01* +X119795311Y-51771428D02* +X119752454Y-51814285D01* +X119752454Y-51814285D02* +X119666740Y-51857142D01* +X119666740Y-51857142D02* +X119581025Y-51857142D01* +X119581025Y-51857142D02* +X119495311Y-51814285D01* +X119495311Y-51814285D02* +X119452454Y-51771428D01* +X119452454Y-51771428D02* +X119409597Y-51685713D01* +X119409597Y-51685713D02* +X119409597Y-51471428D01* +X119409597Y-51471428D02* +X119452454Y-51342856D01* +X122809597Y-54492856D02* +X121909597Y-54492856D01* +X121909597Y-54492856D02* +X121909597Y-54149999D01* +X121909597Y-54149999D02* +X121952454Y-54064284D01* +X121952454Y-54064284D02* +X121995311Y-54021427D01* +X121995311Y-54021427D02* +X122081025Y-53978570D01* +X122081025Y-53978570D02* +X122209597Y-53978570D01* +X122209597Y-53978570D02* +X122295311Y-54021427D01* +X122295311Y-54021427D02* +X122338168Y-54064284D01* +X122338168Y-54064284D02* +X122381025Y-54149999D01* +X122381025Y-54149999D02* +X122381025Y-54492856D01* +X122723882Y-53078570D02* +X122766740Y-53121427D01* +X122766740Y-53121427D02* +X122809597Y-53249999D01* +X122809597Y-53249999D02* +X122809597Y-53335713D01* +X122809597Y-53335713D02* +X122766740Y-53464284D01* +X122766740Y-53464284D02* +X122681025Y-53549999D01* +X122681025Y-53549999D02* +X122595311Y-53592856D01* +X122595311Y-53592856D02* +X122423882Y-53635713D01* +X122423882Y-53635713D02* +X122295311Y-53635713D01* +X122295311Y-53635713D02* +X122123882Y-53592856D01* +X122123882Y-53592856D02* +X122038168Y-53549999D01* +X122038168Y-53549999D02* +X121952454Y-53464284D01* +X121952454Y-53464284D02* +X121909597Y-53335713D01* +X121909597Y-53335713D02* +X121909597Y-53249999D01* +X121909597Y-53249999D02* +X121952454Y-53121427D01* +X121952454Y-53121427D02* +X121995311Y-53078570D01* +X121909597Y-52821427D02* +X121909597Y-52307142D01* +X122809597Y-52564284D02* +X121909597Y-52564284D01* +X122809597Y-51578570D02* +X122809597Y-52007142D01* +X122809597Y-52007142D02* +X121909597Y-52007142D01* +X121909597Y-79242857D02* +X122638168Y-79242857D01* +X122638168Y-79242857D02* +X122723882Y-79200000D01* +X122723882Y-79200000D02* +X122766740Y-79157143D01* +X122766740Y-79157143D02* +X122809597Y-79071428D01* +X122809597Y-79071428D02* +X122809597Y-78900000D01* +X122809597Y-78900000D02* +X122766740Y-78814285D01* +X122766740Y-78814285D02* +X122723882Y-78771428D01* +X122723882Y-78771428D02* +X122638168Y-78728571D01* +X122638168Y-78728571D02* +X121909597Y-78728571D01* +X122466740Y-78300000D02* +X122466740Y-77614286D01* +X122809597Y-76671428D02* +X122381025Y-76971428D01* +X122809597Y-77185714D02* +X121909597Y-77185714D01* +X121909597Y-77185714D02* +X121909597Y-76842857D01* +X121909597Y-76842857D02* +X121952454Y-76757142D01* +X121952454Y-76757142D02* +X121995311Y-76714285D01* +X121995311Y-76714285D02* +X122081025Y-76671428D01* +X122081025Y-76671428D02* +X122209597Y-76671428D01* +X122209597Y-76671428D02* +X122295311Y-76714285D01* +X122295311Y-76714285D02* +X122338168Y-76757142D01* +X122338168Y-76757142D02* +X122381025Y-76842857D01* +X122381025Y-76842857D02* +X122381025Y-77185714D01* +X121909597Y-76371428D02* +X122809597Y-75771428D01* +X121909597Y-75771428D02* +X122809597Y-76371428D01* +X124522454Y-54042856D02* +X124479597Y-54128571D01* +X124479597Y-54128571D02* +X124479597Y-54257142D01* +X124479597Y-54257142D02* +X124522454Y-54385713D01* +X124522454Y-54385713D02* +X124608168Y-54471428D01* +X124608168Y-54471428D02* +X124693882Y-54514285D01* +X124693882Y-54514285D02* +X124865311Y-54557142D01* +X124865311Y-54557142D02* +X124993882Y-54557142D01* +X124993882Y-54557142D02* +X125165311Y-54514285D01* +X125165311Y-54514285D02* +X125251025Y-54471428D01* +X125251025Y-54471428D02* +X125336740Y-54385713D01* +X125336740Y-54385713D02* +X125379597Y-54257142D01* +X125379597Y-54257142D02* +X125379597Y-54171428D01* +X125379597Y-54171428D02* +X125336740Y-54042856D01* +X125336740Y-54042856D02* +X125293882Y-53999999D01* +X125293882Y-53999999D02* +X124993882Y-53999999D01* +X124993882Y-53999999D02* +X124993882Y-54171428D01* +X125036740Y-53614285D02* +X125036740Y-52928571D01* +X124479597Y-52628570D02* +X124479597Y-52114285D01* +X125379597Y-52371427D02* +X124479597Y-52371427D01* +X124479597Y-51899999D02* +X125379597Y-51299999D01* +X124479597Y-51299999D02* +X125379597Y-51899999D01* +X125776740Y-133985714D02* +X125819597Y-133857143D01* +X125819597Y-133857143D02* +X125819597Y-133642857D01* +X125819597Y-133642857D02* +X125776740Y-133557143D01* +X125776740Y-133557143D02* +X125733882Y-133514285D01* +X125733882Y-133514285D02* +X125648168Y-133471428D01* +X125648168Y-133471428D02* +X125562454Y-133471428D01* +X125562454Y-133471428D02* +X125476740Y-133514285D01* +X125476740Y-133514285D02* +X125433882Y-133557143D01* +X125433882Y-133557143D02* +X125391025Y-133642857D01* +X125391025Y-133642857D02* +X125348168Y-133814285D01* +X125348168Y-133814285D02* +X125305311Y-133900000D01* +X125305311Y-133900000D02* +X125262454Y-133942857D01* +X125262454Y-133942857D02* +X125176740Y-133985714D01* +X125176740Y-133985714D02* +X125091025Y-133985714D01* +X125091025Y-133985714D02* +X125005311Y-133942857D01* +X125005311Y-133942857D02* +X124962454Y-133900000D01* +X124962454Y-133900000D02* +X124919597Y-133814285D01* +X124919597Y-133814285D02* +X124919597Y-133600000D01* +X124919597Y-133600000D02* +X124962454Y-133471428D01* +X124919597Y-133171428D02* +X125819597Y-132957142D01* +X125819597Y-132957142D02* +X125176740Y-132785714D01* +X125176740Y-132785714D02* +X125819597Y-132614285D01* +X125819597Y-132614285D02* +X124919597Y-132400000D01* +X124919597Y-131628571D02* +X124919597Y-132057143D01* +X124919597Y-132057143D02* +X125348168Y-132100000D01* +X125348168Y-132100000D02* +X125305311Y-132057143D01* +X125305311Y-132057143D02* +X125262454Y-131971429D01* +X125262454Y-131971429D02* +X125262454Y-131757143D01* +X125262454Y-131757143D02* +X125305311Y-131671429D01* +X125305311Y-131671429D02* +X125348168Y-131628571D01* +X125348168Y-131628571D02* +X125433882Y-131585714D01* +X125433882Y-131585714D02* +X125648168Y-131585714D01* +X125648168Y-131585714D02* +X125733882Y-131628571D01* +X125733882Y-131628571D02* +X125776740Y-131671429D01* +X125776740Y-131671429D02* +X125819597Y-131757143D01* +X125819597Y-131757143D02* +X125819597Y-131971429D01* +X125819597Y-131971429D02* +X125776740Y-132057143D01* +X125776740Y-132057143D02* +X125733882Y-132100000D01* +X124919597Y-131328571D02* +X125819597Y-131028571D01* +X125819597Y-131028571D02* +X124919597Y-130728571D01* +X127102454Y-53999999D02* +X127059597Y-54085714D01* +X127059597Y-54085714D02* +X127059597Y-54214285D01* +X127059597Y-54214285D02* +X127102454Y-54342856D01* +X127102454Y-54342856D02* +X127188168Y-54428571D01* +X127188168Y-54428571D02* +X127273882Y-54471428D01* +X127273882Y-54471428D02* +X127445311Y-54514285D01* +X127445311Y-54514285D02* +X127573882Y-54514285D01* +X127573882Y-54514285D02* +X127745311Y-54471428D01* +X127745311Y-54471428D02* +X127831025Y-54428571D01* +X127831025Y-54428571D02* +X127916740Y-54342856D01* +X127916740Y-54342856D02* +X127959597Y-54214285D01* +X127959597Y-54214285D02* +X127959597Y-54128571D01* +X127959597Y-54128571D02* +X127916740Y-53999999D01* +X127916740Y-53999999D02* +X127873882Y-53957142D01* +X127873882Y-53957142D02* +X127573882Y-53957142D01* +X127573882Y-53957142D02* +X127573882Y-54128571D01* +X127616740Y-53571428D02* +X127616740Y-52885714D01* +X127959597Y-51942856D02* +X127531025Y-52242856D01* +X127959597Y-52457142D02* +X127059597Y-52457142D01* +X127059597Y-52457142D02* +X127059597Y-52114285D01* +X127059597Y-52114285D02* +X127102454Y-52028570D01* +X127102454Y-52028570D02* +X127145311Y-51985713D01* +X127145311Y-51985713D02* +X127231025Y-51942856D01* +X127231025Y-51942856D02* +X127359597Y-51942856D01* +X127359597Y-51942856D02* +X127445311Y-51985713D01* +X127445311Y-51985713D02* +X127488168Y-52028570D01* +X127488168Y-52028570D02* +X127531025Y-52114285D01* +X127531025Y-52114285D02* +X127531025Y-52457142D01* +X127059597Y-51642856D02* +X127959597Y-51042856D01* +X127059597Y-51042856D02* +X127959597Y-51642856D01* +X127502454Y-132885713D02* +X127459597Y-132971428D01* +X127459597Y-132971428D02* +X127459597Y-133099999D01* +X127459597Y-133099999D02* +X127502454Y-133228570D01* +X127502454Y-133228570D02* +X127588168Y-133314285D01* +X127588168Y-133314285D02* +X127673882Y-133357142D01* +X127673882Y-133357142D02* +X127845311Y-133399999D01* +X127845311Y-133399999D02* +X127973882Y-133399999D01* +X127973882Y-133399999D02* +X128145311Y-133357142D01* +X128145311Y-133357142D02* +X128231025Y-133314285D01* +X128231025Y-133314285D02* +X128316740Y-133228570D01* +X128316740Y-133228570D02* +X128359597Y-133099999D01* +X128359597Y-133099999D02* +X128359597Y-133014285D01* +X128359597Y-133014285D02* +X128316740Y-132885713D01* +X128316740Y-132885713D02* +X128273882Y-132842856D01* +X128273882Y-132842856D02* +X127973882Y-132842856D01* +X127973882Y-132842856D02* +X127973882Y-133014285D01* +X128359597Y-132457142D02* +X127459597Y-132457142D01* +X127459597Y-132457142D02* +X128359597Y-131942856D01* +X128359597Y-131942856D02* +X127459597Y-131942856D01* +X128359597Y-131514285D02* +X127459597Y-131514285D01* +X127459597Y-131514285D02* +X127459597Y-131299999D01* +X127459597Y-131299999D02* +X127502454Y-131171428D01* +X127502454Y-131171428D02* +X127588168Y-131085713D01* +X127588168Y-131085713D02* +X127673882Y-131042856D01* +X127673882Y-131042856D02* +X127845311Y-130999999D01* +X127845311Y-130999999D02* +X127973882Y-130999999D01* +X127973882Y-130999999D02* +X128145311Y-131042856D01* +X128145311Y-131042856D02* +X128231025Y-131085713D01* +X128231025Y-131085713D02* +X128316740Y-131171428D01* +X128316740Y-131171428D02* +X128359597Y-131299999D01* +X128359597Y-131299999D02* +X128359597Y-131514285D01* +X128459597Y-80042857D02* +X129188168Y-80042857D01* +X129188168Y-80042857D02* +X129273882Y-80000000D01* +X129273882Y-80000000D02* +X129316740Y-79957143D01* +X129316740Y-79957143D02* +X129359597Y-79871428D01* +X129359597Y-79871428D02* +X129359597Y-79700000D01* +X129359597Y-79700000D02* +X129316740Y-79614285D01* +X129316740Y-79614285D02* +X129273882Y-79571428D01* +X129273882Y-79571428D02* +X129188168Y-79528571D01* +X129188168Y-79528571D02* +X128459597Y-79528571D01* +X129016740Y-79100000D02* +X129016740Y-78414286D01* +X129359597Y-77471428D02* +X128931025Y-77771428D01* +X129359597Y-77985714D02* +X128459597Y-77985714D01* +X128459597Y-77985714D02* +X128459597Y-77642857D01* +X128459597Y-77642857D02* +X128502454Y-77557142D01* +X128502454Y-77557142D02* +X128545311Y-77514285D01* +X128545311Y-77514285D02* +X128631025Y-77471428D01* +X128631025Y-77471428D02* +X128759597Y-77471428D01* +X128759597Y-77471428D02* +X128845311Y-77514285D01* +X128845311Y-77514285D02* +X128888168Y-77557142D01* +X128888168Y-77557142D02* +X128931025Y-77642857D01* +X128931025Y-77642857D02* +X128931025Y-77985714D01* +X128459597Y-77171428D02* +X129359597Y-76571428D01* +X128459597Y-76571428D02* +X129359597Y-77171428D01* +X129559597Y-53899999D02* +X129559597Y-54328571D01* +X129559597Y-54328571D02* +X129988168Y-54371428D01* +X129988168Y-54371428D02* +X129945311Y-54328571D01* +X129945311Y-54328571D02* +X129902454Y-54242857D01* +X129902454Y-54242857D02* +X129902454Y-54028571D01* +X129902454Y-54028571D02* +X129945311Y-53942857D01* +X129945311Y-53942857D02* +X129988168Y-53899999D01* +X129988168Y-53899999D02* +X130073882Y-53857142D01* +X130073882Y-53857142D02* +X130288168Y-53857142D01* +X130288168Y-53857142D02* +X130373882Y-53899999D01* +X130373882Y-53899999D02* +X130416740Y-53942857D01* +X130416740Y-53942857D02* +X130459597Y-54028571D01* +X130459597Y-54028571D02* +X130459597Y-54242857D01* +X130459597Y-54242857D02* +X130416740Y-54328571D01* +X130416740Y-54328571D02* +X130373882Y-54371428D01* +X129559597Y-53599999D02* +X130459597Y-53299999D01* +X130459597Y-53299999D02* +X129559597Y-52999999D01* +X130416740Y-52742856D02* +X130459597Y-52614285D01* +X130459597Y-52614285D02* +X130459597Y-52399999D01* +X130459597Y-52399999D02* +X130416740Y-52314285D01* +X130416740Y-52314285D02* +X130373882Y-52271427D01* +X130373882Y-52271427D02* +X130288168Y-52228570D01* +X130288168Y-52228570D02* +X130202454Y-52228570D01* +X130202454Y-52228570D02* +X130116740Y-52271427D01* +X130116740Y-52271427D02* +X130073882Y-52314285D01* +X130073882Y-52314285D02* +X130031025Y-52399999D01* +X130031025Y-52399999D02* +X129988168Y-52571427D01* +X129988168Y-52571427D02* +X129945311Y-52657142D01* +X129945311Y-52657142D02* +X129902454Y-52699999D01* +X129902454Y-52699999D02* +X129816740Y-52742856D01* +X129816740Y-52742856D02* +X129731025Y-52742856D01* +X129731025Y-52742856D02* +X129645311Y-52699999D01* +X129645311Y-52699999D02* +X129602454Y-52657142D01* +X129602454Y-52657142D02* +X129559597Y-52571427D01* +X129559597Y-52571427D02* +X129559597Y-52357142D01* +X129559597Y-52357142D02* +X129602454Y-52228570D01* +X132999597Y-54421428D02* +X132099597Y-54421428D01* +X132142454Y-53521428D02* +X132099597Y-53607143D01* +X132099597Y-53607143D02* +X132099597Y-53735714D01* +X132099597Y-53735714D02* +X132142454Y-53864285D01* +X132142454Y-53864285D02* +X132228168Y-53950000D01* +X132228168Y-53950000D02* +X132313882Y-53992857D01* +X132313882Y-53992857D02* +X132485311Y-54035714D01* +X132485311Y-54035714D02* +X132613882Y-54035714D01* +X132613882Y-54035714D02* +X132785311Y-53992857D01* +X132785311Y-53992857D02* +X132871025Y-53950000D01* +X132871025Y-53950000D02* +X132956740Y-53864285D01* +X132956740Y-53864285D02* +X132999597Y-53735714D01* +X132999597Y-53735714D02* +X132999597Y-53650000D01* +X132999597Y-53650000D02* +X132956740Y-53521428D01* +X132956740Y-53521428D02* +X132913882Y-53478571D01* +X132913882Y-53478571D02* +X132613882Y-53478571D01* +X132613882Y-53478571D02* +X132613882Y-53650000D01* +X132999597Y-53092857D02* +X132099597Y-53092857D01* +X132099597Y-53092857D02* +X132999597Y-52578571D01* +X132999597Y-52578571D02* +X132099597Y-52578571D01* +X132923882Y-78328571D02* +X132966740Y-78371428D01* +X132966740Y-78371428D02* +X133009597Y-78500000D01* +X133009597Y-78500000D02* +X133009597Y-78585714D01* +X133009597Y-78585714D02* +X132966740Y-78714285D01* +X132966740Y-78714285D02* +X132881025Y-78800000D01* +X132881025Y-78800000D02* +X132795311Y-78842857D01* +X132795311Y-78842857D02* +X132623882Y-78885714D01* +X132623882Y-78885714D02* +X132495311Y-78885714D01* +X132495311Y-78885714D02* +X132323882Y-78842857D01* +X132323882Y-78842857D02* +X132238168Y-78800000D01* +X132238168Y-78800000D02* +X132152454Y-78714285D01* +X132152454Y-78714285D02* +X132109597Y-78585714D01* +X132109597Y-78585714D02* +X132109597Y-78500000D01* +X132109597Y-78500000D02* +X132152454Y-78371428D01* +X132152454Y-78371428D02* +X132195311Y-78328571D01* +X132966740Y-77985714D02* +X133009597Y-77857143D01* +X133009597Y-77857143D02* +X133009597Y-77642857D01* +X133009597Y-77642857D02* +X132966740Y-77557143D01* +X132966740Y-77557143D02* +X132923882Y-77514285D01* +X132923882Y-77514285D02* +X132838168Y-77471428D01* +X132838168Y-77471428D02* +X132752454Y-77471428D01* +X132752454Y-77471428D02* +X132666740Y-77514285D01* +X132666740Y-77514285D02* +X132623882Y-77557143D01* +X132623882Y-77557143D02* +X132581025Y-77642857D01* +X132581025Y-77642857D02* +X132538168Y-77814285D01* +X132538168Y-77814285D02* +X132495311Y-77900000D01* +X132495311Y-77900000D02* +X132452454Y-77942857D01* +X132452454Y-77942857D02* +X132366740Y-77985714D01* +X132366740Y-77985714D02* +X132281025Y-77985714D01* +X132281025Y-77985714D02* +X132195311Y-77942857D01* +X132195311Y-77942857D02* +X132152454Y-77900000D01* +X132152454Y-77900000D02* +X132109597Y-77814285D01* +X132109597Y-77814285D02* +X132109597Y-77600000D01* +X132109597Y-77600000D02* +X132152454Y-77471428D01* +X132109597Y-77214285D02* +X132109597Y-76700000D01* +X133009597Y-76957142D02* +X132109597Y-76957142D01* +X132752454Y-76442857D02* +X132752454Y-76014286D01* +X133009597Y-76528571D02* +X132109597Y-76228571D01* +X132109597Y-76228571D02* +X133009597Y-75928571D01* +X135423882Y-78264285D02* +X135466740Y-78307142D01* +X135466740Y-78307142D02* +X135509597Y-78435714D01* +X135509597Y-78435714D02* +X135509597Y-78521428D01* +X135509597Y-78521428D02* +X135466740Y-78649999D01* +X135466740Y-78649999D02* +X135381025Y-78735714D01* +X135381025Y-78735714D02* +X135295311Y-78778571D01* +X135295311Y-78778571D02* +X135123882Y-78821428D01* +X135123882Y-78821428D02* +X134995311Y-78821428D01* +X134995311Y-78821428D02* +X134823882Y-78778571D01* +X134823882Y-78778571D02* +X134738168Y-78735714D01* +X134738168Y-78735714D02* +X134652454Y-78649999D01* +X134652454Y-78649999D02* +X134609597Y-78521428D01* +X134609597Y-78521428D02* +X134609597Y-78435714D01* +X134609597Y-78435714D02* +X134652454Y-78307142D01* +X134652454Y-78307142D02* +X134695311Y-78264285D01* +X135038168Y-77578571D02* +X135038168Y-77878571D01* +X135509597Y-77878571D02* +X134609597Y-77878571D01* +X134609597Y-77878571D02* +X134609597Y-77449999D01* +X135509597Y-76678570D02* +X135509597Y-77107142D01* +X135509597Y-77107142D02* +X134609597Y-77107142D01* +X134609597Y-76507142D02* +X134609597Y-75992857D01* +X135509597Y-76249999D02* +X134609597Y-76249999D01* +X135188168Y-54199999D02* +X135188168Y-54499999D01* +X135659597Y-54499999D02* +X134759597Y-54499999D01* +X134759597Y-54499999D02* +X134759597Y-54071427D01* +X135659597Y-53728570D02* +X134759597Y-53728570D01* +X134759597Y-53728570D02* +X134759597Y-53385713D01* +X134759597Y-53385713D02* +X134802454Y-53299998D01* +X134802454Y-53299998D02* +X134845311Y-53257141D01* +X134845311Y-53257141D02* +X134931025Y-53214284D01* +X134931025Y-53214284D02* +X135059597Y-53214284D01* +X135059597Y-53214284D02* +X135145311Y-53257141D01* +X135145311Y-53257141D02* +X135188168Y-53299998D01* +X135188168Y-53299998D02* +X135231025Y-53385713D01* +X135231025Y-53385713D02* +X135231025Y-53728570D01* +X134759597Y-52914284D02* +X135659597Y-52699998D01* +X135659597Y-52699998D02* +X135016740Y-52528570D01* +X135016740Y-52528570D02* +X135659597Y-52357141D01* +X135659597Y-52357141D02* +X134759597Y-52142856D01* +X135659597Y-51799999D02* +X134759597Y-51799999D01* +X134759597Y-51799999D02* +X135402454Y-51499999D01* +X135402454Y-51499999D02* +X134759597Y-51199999D01* +X134759597Y-51199999D02* +X135659597Y-51199999D01* +X137608168Y-77671428D02* +X137651025Y-77542856D01* +X137651025Y-77542856D02* +X137693882Y-77499999D01* +X137693882Y-77499999D02* +X137779597Y-77457142D01* +X137779597Y-77457142D02* +X137908168Y-77457142D01* +X137908168Y-77457142D02* +X137993882Y-77499999D01* +X137993882Y-77499999D02* +X138036740Y-77542856D01* +X138036740Y-77542856D02* +X138079597Y-77628571D01* +X138079597Y-77628571D02* +X138079597Y-77971428D01* +X138079597Y-77971428D02* +X137179597Y-77971428D01* +X137179597Y-77971428D02* +X137179597Y-77671428D01* +X137179597Y-77671428D02* +X137222454Y-77585714D01* +X137222454Y-77585714D02* +X137265311Y-77542856D01* +X137265311Y-77542856D02* +X137351025Y-77499999D01* +X137351025Y-77499999D02* +X137436740Y-77499999D01* +X137436740Y-77499999D02* +X137522454Y-77542856D01* +X137522454Y-77542856D02* +X137565311Y-77585714D01* +X137565311Y-77585714D02* +X137608168Y-77671428D01* +X137608168Y-77671428D02* +X137608168Y-77971428D01* +X137651025Y-76899999D02* +X138079597Y-76899999D01* +X137179597Y-77199999D02* +X137651025Y-76899999D01* +X137651025Y-76899999D02* +X137179597Y-76599999D01* +X138079597Y-76299999D02* +X137179597Y-76299999D01* +X137179597Y-76299999D02* +X137179597Y-75957142D01* +X137179597Y-75957142D02* +X137222454Y-75871427D01* +X137222454Y-75871427D02* +X137265311Y-75828570D01* +X137265311Y-75828570D02* +X137351025Y-75785713D01* +X137351025Y-75785713D02* +X137479597Y-75785713D01* +X137479597Y-75785713D02* +X137565311Y-75828570D01* +X137565311Y-75828570D02* +X137608168Y-75871427D01* +X137608168Y-75871427D02* +X137651025Y-75957142D01* +X137651025Y-75957142D02* +X137651025Y-76299999D01* +X140138168Y-54614285D02* +X140138168Y-54314285D01* +X140609597Y-54185713D02* +X140609597Y-54614285D01* +X140609597Y-54614285D02* +X139709597Y-54614285D01* +X139709597Y-54614285D02* +X139709597Y-54185713D01* +X140609597Y-53371427D02* +X140609597Y-53799999D01* +X140609597Y-53799999D02* +X139709597Y-53799999D01* +X140138168Y-53071428D02* +X140138168Y-52771428D01* +X140609597Y-52642856D02* +X140609597Y-53071428D01* +X140609597Y-53071428D02* +X139709597Y-53071428D01* +X139709597Y-53071428D02* +X139709597Y-52642856D01* +X140609597Y-52257142D02* +X139709597Y-52257142D01* +X139709597Y-52257142D02* +X139709597Y-52042856D01* +X139709597Y-52042856D02* +X139752454Y-51914285D01* +X139752454Y-51914285D02* +X139838168Y-51828570D01* +X139838168Y-51828570D02* +X139923882Y-51785713D01* +X139923882Y-51785713D02* +X140095311Y-51742856D01* +X140095311Y-51742856D02* +X140223882Y-51742856D01* +X140223882Y-51742856D02* +X140395311Y-51785713D01* +X140395311Y-51785713D02* +X140481025Y-51828570D01* +X140481025Y-51828570D02* +X140566740Y-51914285D01* +X140566740Y-51914285D02* +X140609597Y-52042856D01* +X140609597Y-52042856D02* +X140609597Y-52257142D01* +X140576740Y-77971428D02* +X140619597Y-77842857D01* +X140619597Y-77842857D02* +X140619597Y-77628571D01* +X140619597Y-77628571D02* +X140576740Y-77542857D01* +X140576740Y-77542857D02* +X140533882Y-77499999D01* +X140533882Y-77499999D02* +X140448168Y-77457142D01* +X140448168Y-77457142D02* +X140362454Y-77457142D01* +X140362454Y-77457142D02* +X140276740Y-77499999D01* +X140276740Y-77499999D02* +X140233882Y-77542857D01* +X140233882Y-77542857D02* +X140191025Y-77628571D01* +X140191025Y-77628571D02* +X140148168Y-77799999D01* +X140148168Y-77799999D02* +X140105311Y-77885714D01* +X140105311Y-77885714D02* +X140062454Y-77928571D01* +X140062454Y-77928571D02* +X139976740Y-77971428D01* +X139976740Y-77971428D02* +X139891025Y-77971428D01* +X139891025Y-77971428D02* +X139805311Y-77928571D01* +X139805311Y-77928571D02* +X139762454Y-77885714D01* +X139762454Y-77885714D02* +X139719597Y-77799999D01* +X139719597Y-77799999D02* +X139719597Y-77585714D01* +X139719597Y-77585714D02* +X139762454Y-77457142D01* +X140533882Y-76557142D02* +X140576740Y-76599999D01* +X140576740Y-76599999D02* +X140619597Y-76728571D01* +X140619597Y-76728571D02* +X140619597Y-76814285D01* +X140619597Y-76814285D02* +X140576740Y-76942856D01* +X140576740Y-76942856D02* +X140491025Y-77028571D01* +X140491025Y-77028571D02* +X140405311Y-77071428D01* +X140405311Y-77071428D02* +X140233882Y-77114285D01* +X140233882Y-77114285D02* +X140105311Y-77114285D01* +X140105311Y-77114285D02* +X139933882Y-77071428D01* +X139933882Y-77071428D02* +X139848168Y-77028571D01* +X139848168Y-77028571D02* +X139762454Y-76942856D01* +X139762454Y-76942856D02* +X139719597Y-76814285D01* +X139719597Y-76814285D02* +X139719597Y-76728571D01* +X139719597Y-76728571D02* +X139762454Y-76599999D01* +X139762454Y-76599999D02* +X139805311Y-76557142D01* +X140619597Y-75742856D02* +X140619597Y-76171428D01* +X140619597Y-76171428D02* +X139719597Y-76171428D01* +X143159597Y-54549999D02* +X142259597Y-54549999D01* +X142259597Y-54549999D02* +X143159597Y-54035713D01* +X143159597Y-54035713D02* +X142259597Y-54035713D01* +X142259597Y-53735713D02* +X142259597Y-53221428D01* +X143159597Y-53478570D02* +X142259597Y-53478570D01* +X143073882Y-52407142D02* +X143116740Y-52449999D01* +X143116740Y-52449999D02* +X143159597Y-52578571D01* +X143159597Y-52578571D02* +X143159597Y-52664285D01* +X143159597Y-52664285D02* +X143116740Y-52792856D01* +X143116740Y-52792856D02* +X143031025Y-52878571D01* +X143031025Y-52878571D02* +X142945311Y-52921428D01* +X142945311Y-52921428D02* +X142773882Y-52964285D01* +X142773882Y-52964285D02* +X142645311Y-52964285D01* +X142645311Y-52964285D02* +X142473882Y-52921428D01* +X142473882Y-52921428D02* +X142388168Y-52878571D01* +X142388168Y-52878571D02* +X142302454Y-52792856D01* +X142302454Y-52792856D02* +X142259597Y-52664285D01* +X142259597Y-52664285D02* +X142259597Y-52578571D01* +X142259597Y-52578571D02* +X142302454Y-52449999D01* +X142302454Y-52449999D02* +X142345311Y-52407142D01* +X143116740Y-77992857D02* +X143159597Y-77864286D01* +X143159597Y-77864286D02* +X143159597Y-77650000D01* +X143159597Y-77650000D02* +X143116740Y-77564286D01* +X143116740Y-77564286D02* +X143073882Y-77521428D01* +X143073882Y-77521428D02* +X142988168Y-77478571D01* +X142988168Y-77478571D02* +X142902454Y-77478571D01* +X142902454Y-77478571D02* +X142816740Y-77521428D01* +X142816740Y-77521428D02* +X142773882Y-77564286D01* +X142773882Y-77564286D02* +X142731025Y-77650000D01* +X142731025Y-77650000D02* +X142688168Y-77821428D01* +X142688168Y-77821428D02* +X142645311Y-77907143D01* +X142645311Y-77907143D02* +X142602454Y-77950000D01* +X142602454Y-77950000D02* +X142516740Y-77992857D01* +X142516740Y-77992857D02* +X142431025Y-77992857D01* +X142431025Y-77992857D02* +X142345311Y-77950000D01* +X142345311Y-77950000D02* +X142302454Y-77907143D01* +X142302454Y-77907143D02* +X142259597Y-77821428D01* +X142259597Y-77821428D02* +X142259597Y-77607143D01* +X142259597Y-77607143D02* +X142302454Y-77478571D01* +X143159597Y-77092857D02* +X142259597Y-77092857D01* +X142259597Y-77092857D02* +X142259597Y-76878571D01* +X142259597Y-76878571D02* +X142302454Y-76750000D01* +X142302454Y-76750000D02* +X142388168Y-76664285D01* +X142388168Y-76664285D02* +X142473882Y-76621428D01* +X142473882Y-76621428D02* +X142645311Y-76578571D01* +X142645311Y-76578571D02* +X142773882Y-76578571D01* +X142773882Y-76578571D02* +X142945311Y-76621428D01* +X142945311Y-76621428D02* +X143031025Y-76664285D01* +X143031025Y-76664285D02* +X143116740Y-76750000D01* +X143116740Y-76750000D02* +X143159597Y-76878571D01* +X143159597Y-76878571D02* +X143159597Y-77092857D01* +X142902454Y-76235714D02* +X142902454Y-75807143D01* +X143159597Y-76321428D02* +X142259597Y-76021428D01* +X142259597Y-76021428D02* +X143159597Y-75721428D01* +X146139597Y-79721428D02* +X145239597Y-79721428D01* +X145239597Y-79721428D02* +X145239597Y-79507142D01* +X145239597Y-79507142D02* +X145282454Y-79378571D01* +X145282454Y-79378571D02* +X145368168Y-79292856D01* +X145368168Y-79292856D02* +X145453882Y-79249999D01* +X145453882Y-79249999D02* +X145625311Y-79207142D01* +X145625311Y-79207142D02* +X145753882Y-79207142D01* +X145753882Y-79207142D02* +X145925311Y-79249999D01* +X145925311Y-79249999D02* +X146011025Y-79292856D01* +X146011025Y-79292856D02* +X146096740Y-79378571D01* +X146096740Y-79378571D02* +X146139597Y-79507142D01* +X146139597Y-79507142D02* +X146139597Y-79721428D01* +X145239597Y-78649999D02* +X145239597Y-78478571D01* +X145239597Y-78478571D02* +X145282454Y-78392856D01* +X145282454Y-78392856D02* +X145368168Y-78307142D01* +X145368168Y-78307142D02* +X145539597Y-78264285D01* +X145539597Y-78264285D02* +X145839597Y-78264285D01* +X145839597Y-78264285D02* +X146011025Y-78307142D01* +X146011025Y-78307142D02* +X146096740Y-78392856D01* +X146096740Y-78392856D02* +X146139597Y-78478571D01* +X146139597Y-78478571D02* +X146139597Y-78649999D01* +X146139597Y-78649999D02* +X146096740Y-78735714D01* +X146096740Y-78735714D02* +X146011025Y-78821428D01* +X146011025Y-78821428D02* +X145839597Y-78864285D01* +X145839597Y-78864285D02* +X145539597Y-78864285D01* +X145539597Y-78864285D02* +X145368168Y-78821428D01* +X145368168Y-78821428D02* +X145282454Y-78735714D01* +X145282454Y-78735714D02* +X145239597Y-78649999D01* +X145239597Y-77878571D02* +X145968168Y-77878571D01* +X145968168Y-77878571D02* +X146053882Y-77835714D01* +X146053882Y-77835714D02* +X146096740Y-77792857D01* +X146096740Y-77792857D02* +X146139597Y-77707142D01* +X146139597Y-77707142D02* +X146139597Y-77535714D01* +X146139597Y-77535714D02* +X146096740Y-77449999D01* +X146096740Y-77449999D02* +X146053882Y-77407142D01* +X146053882Y-77407142D02* +X145968168Y-77364285D01* +X145968168Y-77364285D02* +X145239597Y-77364285D01* +X145239597Y-77064285D02* +X145239597Y-76550000D01* +X146139597Y-76807142D02* +X145239597Y-76807142D01* +X147768168Y-54550000D02* +X147768168Y-54850000D01* +X148239597Y-54850000D02* +X147339597Y-54850000D01* +X147339597Y-54850000D02* +X147339597Y-54421428D01* +X147339597Y-54207142D02* +X147339597Y-53692857D01* +X148239597Y-53949999D02* +X147339597Y-53949999D01* +X147982454Y-53435714D02* +X147982454Y-53007143D01* +X148239597Y-53521428D02* +X147339597Y-53221428D01* +X147339597Y-53221428D02* +X148239597Y-52921428D01* +X148153882Y-52107142D02* +X148196740Y-52149999D01* +X148196740Y-52149999D02* +X148239597Y-52278571D01* +X148239597Y-52278571D02* +X148239597Y-52364285D01* +X148239597Y-52364285D02* +X148196740Y-52492856D01* +X148196740Y-52492856D02* +X148111025Y-52578571D01* +X148111025Y-52578571D02* +X148025311Y-52621428D01* +X148025311Y-52621428D02* +X147853882Y-52664285D01* +X147853882Y-52664285D02* +X147725311Y-52664285D01* +X147725311Y-52664285D02* +X147553882Y-52621428D01* +X147553882Y-52621428D02* +X147468168Y-52578571D01* +X147468168Y-52578571D02* +X147382454Y-52492856D01* +X147382454Y-52492856D02* +X147339597Y-52364285D01* +X147339597Y-52364285D02* +X147339597Y-52278571D01* +X147339597Y-52278571D02* +X147382454Y-52149999D01* +X147382454Y-52149999D02* +X147425311Y-52107142D01* +X147852454Y-85592856D02* +X147809597Y-85678571D01* +X147809597Y-85678571D02* +X147809597Y-85807142D01* +X147809597Y-85807142D02* +X147852454Y-85935713D01* +X147852454Y-85935713D02* +X147938168Y-86021428D01* +X147938168Y-86021428D02* +X148023882Y-86064285D01* +X148023882Y-86064285D02* +X148195311Y-86107142D01* +X148195311Y-86107142D02* +X148323882Y-86107142D01* +X148323882Y-86107142D02* +X148495311Y-86064285D01* +X148495311Y-86064285D02* +X148581025Y-86021428D01* +X148581025Y-86021428D02* +X148666740Y-85935713D01* +X148666740Y-85935713D02* +X148709597Y-85807142D01* +X148709597Y-85807142D02* +X148709597Y-85721428D01* +X148709597Y-85721428D02* +X148666740Y-85592856D01* +X148666740Y-85592856D02* +X148623882Y-85549999D01* +X148623882Y-85549999D02* +X148323882Y-85549999D01* +X148323882Y-85549999D02* +X148323882Y-85721428D01* +X148366740Y-85164285D02* +X148366740Y-84478571D01* +X147809597Y-84178570D02* +X147809597Y-83664285D01* +X148709597Y-83921427D02* +X147809597Y-83921427D01* +X147809597Y-83449999D02* +X148709597Y-82849999D01* +X147809597Y-82849999D02* +X148709597Y-83449999D01* +X149879597Y-54614285D02* +X149879597Y-54057142D01* +X149879597Y-54057142D02* +X150222454Y-54357142D01* +X150222454Y-54357142D02* +X150222454Y-54228571D01* +X150222454Y-54228571D02* +X150265311Y-54142857D01* +X150265311Y-54142857D02* +X150308168Y-54099999D01* +X150308168Y-54099999D02* +X150393882Y-54057142D01* +X150393882Y-54057142D02* +X150608168Y-54057142D01* +X150608168Y-54057142D02* +X150693882Y-54099999D01* +X150693882Y-54099999D02* +X150736740Y-54142857D01* +X150736740Y-54142857D02* +X150779597Y-54228571D01* +X150779597Y-54228571D02* +X150779597Y-54485714D01* +X150779597Y-54485714D02* +X150736740Y-54571428D01* +X150736740Y-54571428D02* +X150693882Y-54614285D01* +X149879597Y-53799999D02* +X150779597Y-53499999D01* +X150779597Y-53499999D02* +X149879597Y-53199999D01* +X149879597Y-52985713D02* +X149879597Y-52428570D01* +X149879597Y-52428570D02* +X150222454Y-52728570D01* +X150222454Y-52728570D02* +X150222454Y-52599999D01* +X150222454Y-52599999D02* +X150265311Y-52514285D01* +X150265311Y-52514285D02* +X150308168Y-52471427D01* +X150308168Y-52471427D02* +X150393882Y-52428570D01* +X150393882Y-52428570D02* +X150608168Y-52428570D01* +X150608168Y-52428570D02* +X150693882Y-52471427D01* +X150693882Y-52471427D02* +X150736740Y-52514285D01* +X150736740Y-52514285D02* +X150779597Y-52599999D01* +X150779597Y-52599999D02* +X150779597Y-52857142D01* +X150779597Y-52857142D02* +X150736740Y-52942856D01* +X150736740Y-52942856D02* +X150693882Y-52985713D01* +X149879597Y-77071428D02* +X149879597Y-77500000D01* +X149879597Y-77500000D02* +X150308168Y-77542857D01* +X150308168Y-77542857D02* +X150265311Y-77500000D01* +X150265311Y-77500000D02* +X150222454Y-77414286D01* +X150222454Y-77414286D02* +X150222454Y-77200000D01* +X150222454Y-77200000D02* +X150265311Y-77114286D01* +X150265311Y-77114286D02* +X150308168Y-77071428D01* +X150308168Y-77071428D02* +X150393882Y-77028571D01* +X150393882Y-77028571D02* +X150608168Y-77028571D01* +X150608168Y-77028571D02* +X150693882Y-77071428D01* +X150693882Y-77071428D02* +X150736740Y-77114286D01* +X150736740Y-77114286D02* +X150779597Y-77200000D01* +X150779597Y-77200000D02* +X150779597Y-77414286D01* +X150779597Y-77414286D02* +X150736740Y-77500000D01* +X150736740Y-77500000D02* +X150693882Y-77542857D01* +X149879597Y-76771428D02* +X150779597Y-76471428D01* +X150779597Y-76471428D02* +X149879597Y-76171428D01* +X150602454Y-85799999D02* +X150559597Y-85885714D01* +X150559597Y-85885714D02* +X150559597Y-86014285D01* +X150559597Y-86014285D02* +X150602454Y-86142856D01* +X150602454Y-86142856D02* +X150688168Y-86228571D01* +X150688168Y-86228571D02* +X150773882Y-86271428D01* +X150773882Y-86271428D02* +X150945311Y-86314285D01* +X150945311Y-86314285D02* +X151073882Y-86314285D01* +X151073882Y-86314285D02* +X151245311Y-86271428D01* +X151245311Y-86271428D02* +X151331025Y-86228571D01* +X151331025Y-86228571D02* +X151416740Y-86142856D01* +X151416740Y-86142856D02* +X151459597Y-86014285D01* +X151459597Y-86014285D02* +X151459597Y-85928571D01* +X151459597Y-85928571D02* +X151416740Y-85799999D01* +X151416740Y-85799999D02* +X151373882Y-85757142D01* +X151373882Y-85757142D02* +X151073882Y-85757142D01* +X151073882Y-85757142D02* +X151073882Y-85928571D01* +X151116740Y-85371428D02* +X151116740Y-84685714D01* +X151459597Y-83742856D02* +X151031025Y-84042856D01* +X151459597Y-84257142D02* +X150559597Y-84257142D01* +X150559597Y-84257142D02* +X150559597Y-83914285D01* +X150559597Y-83914285D02* +X150602454Y-83828570D01* +X150602454Y-83828570D02* +X150645311Y-83785713D01* +X150645311Y-83785713D02* +X150731025Y-83742856D01* +X150731025Y-83742856D02* +X150859597Y-83742856D01* +X150859597Y-83742856D02* +X150945311Y-83785713D01* +X150945311Y-83785713D02* +X150988168Y-83828570D01* +X150988168Y-83828570D02* +X151031025Y-83914285D01* +X151031025Y-83914285D02* +X151031025Y-84257142D01* +X150559597Y-83442856D02* +X151459597Y-82842856D01* +X150559597Y-82842856D02* +X151459597Y-83442856D01* +X152452454Y-59835713D02* +X152409597Y-59921428D01* +X152409597Y-59921428D02* +X152409597Y-60049999D01* +X152409597Y-60049999D02* +X152452454Y-60178570D01* +X152452454Y-60178570D02* +X152538168Y-60264285D01* +X152538168Y-60264285D02* +X152623882Y-60307142D01* +X152623882Y-60307142D02* +X152795311Y-60349999D01* +X152795311Y-60349999D02* +X152923882Y-60349999D01* +X152923882Y-60349999D02* +X153095311Y-60307142D01* +X153095311Y-60307142D02* +X153181025Y-60264285D01* +X153181025Y-60264285D02* +X153266740Y-60178570D01* +X153266740Y-60178570D02* +X153309597Y-60049999D01* +X153309597Y-60049999D02* +X153309597Y-59964285D01* +X153309597Y-59964285D02* +X153266740Y-59835713D01* +X153266740Y-59835713D02* +X153223882Y-59792856D01* +X153223882Y-59792856D02* +X152923882Y-59792856D01* +X152923882Y-59792856D02* +X152923882Y-59964285D01* +X153309597Y-59407142D02* +X152409597Y-59407142D01* +X152409597Y-59407142D02* +X153309597Y-58892856D01* +X153309597Y-58892856D02* +X152409597Y-58892856D01* +X153309597Y-58464285D02* +X152409597Y-58464285D01* +X152409597Y-58464285D02* +X152409597Y-58249999D01* +X152409597Y-58249999D02* +X152452454Y-58121428D01* +X152452454Y-58121428D02* +X152538168Y-58035713D01* +X152538168Y-58035713D02* +X152623882Y-57992856D01* +X152623882Y-57992856D02* +X152795311Y-57949999D01* +X152795311Y-57949999D02* +X152923882Y-57949999D01* +X152923882Y-57949999D02* +X153095311Y-57992856D01* +X153095311Y-57992856D02* +X153181025Y-58035713D01* +X153181025Y-58035713D02* +X153266740Y-58121428D01* +X153266740Y-58121428D02* +X153309597Y-58249999D01* +X153309597Y-58249999D02* +X153309597Y-58464285D01* +X152462454Y-77585713D02* +X152419597Y-77671428D01* +X152419597Y-77671428D02* +X152419597Y-77799999D01* +X152419597Y-77799999D02* +X152462454Y-77928570D01* +X152462454Y-77928570D02* +X152548168Y-78014285D01* +X152548168Y-78014285D02* +X152633882Y-78057142D01* +X152633882Y-78057142D02* +X152805311Y-78099999D01* +X152805311Y-78099999D02* +X152933882Y-78099999D01* +X152933882Y-78099999D02* +X153105311Y-78057142D01* +X153105311Y-78057142D02* +X153191025Y-78014285D01* +X153191025Y-78014285D02* +X153276740Y-77928570D01* +X153276740Y-77928570D02* +X153319597Y-77799999D01* +X153319597Y-77799999D02* +X153319597Y-77714285D01* +X153319597Y-77714285D02* +X153276740Y-77585713D01* +X153276740Y-77585713D02* +X153233882Y-77542856D01* +X153233882Y-77542856D02* +X152933882Y-77542856D01* +X152933882Y-77542856D02* +X152933882Y-77714285D01* +X153319597Y-77157142D02* +X152419597Y-77157142D01* +X152419597Y-77157142D02* +X153319597Y-76642856D01* +X153319597Y-76642856D02* +X152419597Y-76642856D01* +X153319597Y-76214285D02* +X152419597Y-76214285D01* +X152419597Y-76214285D02* +X152419597Y-75999999D01* +X152419597Y-75999999D02* +X152462454Y-75871428D01* +X152462454Y-75871428D02* +X152548168Y-75785713D01* +X152548168Y-75785713D02* +X152633882Y-75742856D01* +X152633882Y-75742856D02* +X152805311Y-75699999D01* +X152805311Y-75699999D02* +X152933882Y-75699999D01* +X152933882Y-75699999D02* +X153105311Y-75742856D01* +X153105311Y-75742856D02* +X153191025Y-75785713D01* +X153191025Y-75785713D02* +X153276740Y-75871428D01* +X153276740Y-75871428D02* +X153319597Y-75999999D01* +X153319597Y-75999999D02* +X153319597Y-76214285D01* +X154959597Y-78014285D02* +X154959597Y-77457142D01* +X154959597Y-77457142D02* +X155302454Y-77757142D01* +X155302454Y-77757142D02* +X155302454Y-77628571D01* +X155302454Y-77628571D02* +X155345311Y-77542857D01* +X155345311Y-77542857D02* +X155388168Y-77499999D01* +X155388168Y-77499999D02* +X155473882Y-77457142D01* +X155473882Y-77457142D02* +X155688168Y-77457142D01* +X155688168Y-77457142D02* +X155773882Y-77499999D01* +X155773882Y-77499999D02* +X155816740Y-77542857D01* +X155816740Y-77542857D02* +X155859597Y-77628571D01* +X155859597Y-77628571D02* +X155859597Y-77885714D01* +X155859597Y-77885714D02* +X155816740Y-77971428D01* +X155816740Y-77971428D02* +X155773882Y-78014285D01* +X154959597Y-77199999D02* +X155859597Y-76899999D01* +X155859597Y-76899999D02* +X154959597Y-76599999D01* +X154959597Y-76385713D02* +X154959597Y-75828570D01* +X154959597Y-75828570D02* +X155302454Y-76128570D01* +X155302454Y-76128570D02* +X155302454Y-75999999D01* +X155302454Y-75999999D02* +X155345311Y-75914285D01* +X155345311Y-75914285D02* +X155388168Y-75871427D01* +X155388168Y-75871427D02* +X155473882Y-75828570D01* +X155473882Y-75828570D02* +X155688168Y-75828570D01* +X155688168Y-75828570D02* +X155773882Y-75871427D01* +X155773882Y-75871427D02* +X155816740Y-75914285D01* +X155816740Y-75914285D02* +X155859597Y-75999999D01* +X155859597Y-75999999D02* +X155859597Y-76257142D01* +X155859597Y-76257142D02* +X155816740Y-76342856D01* +X155816740Y-76342856D02* +X155773882Y-76385713D01* +X155059597Y-58821428D02* +X155059597Y-59250000D01* +X155059597Y-59250000D02* +X155488168Y-59292857D01* +X155488168Y-59292857D02* +X155445311Y-59250000D01* +X155445311Y-59250000D02* +X155402454Y-59164286D01* +X155402454Y-59164286D02* +X155402454Y-58950000D01* +X155402454Y-58950000D02* +X155445311Y-58864286D01* +X155445311Y-58864286D02* +X155488168Y-58821428D01* +X155488168Y-58821428D02* +X155573882Y-58778571D01* +X155573882Y-58778571D02* +X155788168Y-58778571D01* +X155788168Y-58778571D02* +X155873882Y-58821428D01* +X155873882Y-58821428D02* +X155916740Y-58864286D01* +X155916740Y-58864286D02* +X155959597Y-58950000D01* +X155959597Y-58950000D02* +X155959597Y-59164286D01* +X155959597Y-59164286D02* +X155916740Y-59250000D01* +X155916740Y-59250000D02* +X155873882Y-59292857D01* +X155059597Y-58521428D02* +X155959597Y-58221428D01* +X155959597Y-58221428D02* +X155059597Y-57921428D01* +D12* +X113283332Y-136203933D02* +X113549998Y-137137266D01* +X113549998Y-137137266D02* +X113816665Y-136470600D01* +X113816665Y-136470600D02* +X114083332Y-137137266D01* +X114083332Y-137137266D02* +X114349998Y-136203933D01* +X114749999Y-136203933D02* +X115016665Y-137137266D01* +X115016665Y-137137266D02* +X115283332Y-136470600D01* +X115283332Y-136470600D02* +X115549999Y-137137266D01* +X115549999Y-137137266D02* +X115816665Y-136203933D01* +X116216666Y-136203933D02* +X116483332Y-137137266D01* +X116483332Y-137137266D02* +X116749999Y-136470600D01* +X116749999Y-136470600D02* +X117016666Y-137137266D01* +X117016666Y-137137266D02* +X117283332Y-136203933D01* +X117816666Y-137003933D02* +X117883333Y-137070600D01* +X117883333Y-137070600D02* +X117816666Y-137137266D01* +X117816666Y-137137266D02* +X117749999Y-137070600D01* +X117749999Y-137070600D02* +X117816666Y-137003933D01* +X117816666Y-137003933D02* +X117816666Y-137137266D01* +X118483333Y-137137266D02* +X118483333Y-135737266D01* +X119083333Y-137137266D02* +X119083333Y-136403933D01* +X119083333Y-136403933D02* +X119016666Y-136270600D01* +X119016666Y-136270600D02* +X118883333Y-136203933D01* +X118883333Y-136203933D02* +X118683333Y-136203933D01* +X118683333Y-136203933D02* +X118550000Y-136270600D01* +X118550000Y-136270600D02* +X118483333Y-136337266D01* +X120283333Y-137070600D02* +X120150000Y-137137266D01* +X120150000Y-137137266D02* +X119883333Y-137137266D01* +X119883333Y-137137266D02* +X119750000Y-137070600D01* +X119750000Y-137070600D02* +X119683333Y-136937266D01* +X119683333Y-136937266D02* +X119683333Y-136403933D01* +X119683333Y-136403933D02* +X119750000Y-136270600D01* +X119750000Y-136270600D02* +X119883333Y-136203933D01* +X119883333Y-136203933D02* +X120150000Y-136203933D01* +X120150000Y-136203933D02* +X120283333Y-136270600D01* +X120283333Y-136270600D02* +X120350000Y-136403933D01* +X120350000Y-136403933D02* +X120350000Y-136537266D01* +X120350000Y-136537266D02* +X119683333Y-136670600D01* +X121150000Y-137137266D02* +X121016667Y-137070600D01* +X121016667Y-137070600D02* +X120950000Y-136937266D01* +X120950000Y-136937266D02* +X120950000Y-135737266D01* +X122283333Y-136203933D02* +X122283333Y-137337266D01* +X122283333Y-137337266D02* +X122216666Y-137470600D01* +X122216666Y-137470600D02* +X122150000Y-137537266D01* +X122150000Y-137537266D02* +X122016666Y-137603933D01* +X122016666Y-137603933D02* +X121816666Y-137603933D01* +X121816666Y-137603933D02* +X121683333Y-137537266D01* +X122283333Y-137070600D02* +X122150000Y-137137266D01* +X122150000Y-137137266D02* +X121883333Y-137137266D01* +X121883333Y-137137266D02* +X121750000Y-137070600D01* +X121750000Y-137070600D02* +X121683333Y-137003933D01* +X121683333Y-137003933D02* +X121616666Y-136870600D01* +X121616666Y-136870600D02* +X121616666Y-136470600D01* +X121616666Y-136470600D02* +X121683333Y-136337266D01* +X121683333Y-136337266D02* +X121750000Y-136270600D01* +X121750000Y-136270600D02* +X121883333Y-136203933D01* +X121883333Y-136203933D02* +X122150000Y-136203933D01* +X122150000Y-136203933D02* +X122283333Y-136270600D01* +X123483333Y-137070600D02* +X123350000Y-137137266D01* +X123350000Y-137137266D02* +X123083333Y-137137266D01* +X123083333Y-137137266D02* +X122950000Y-137070600D01* +X122950000Y-137070600D02* +X122883333Y-136937266D01* +X122883333Y-136937266D02* +X122883333Y-136403933D01* +X122883333Y-136403933D02* +X122950000Y-136270600D01* +X122950000Y-136270600D02* +X123083333Y-136203933D01* +X123083333Y-136203933D02* +X123350000Y-136203933D01* +X123350000Y-136203933D02* +X123483333Y-136270600D01* +X123483333Y-136270600D02* +X123550000Y-136403933D01* +X123550000Y-136403933D02* +X123550000Y-136537266D01* +X123550000Y-136537266D02* +X122883333Y-136670600D01* +X124150000Y-136203933D02* +X124150000Y-137137266D01* +X124150000Y-136337266D02* +X124216667Y-136270600D01* +X124216667Y-136270600D02* +X124350000Y-136203933D01* +X124350000Y-136203933D02* +X124550000Y-136203933D01* +X124550000Y-136203933D02* +X124683333Y-136270600D01* +X124683333Y-136270600D02* +X124750000Y-136403933D01* +X124750000Y-136403933D02* +X124750000Y-137137266D01* +X125416667Y-137003933D02* +X125483334Y-137070600D01* +X125483334Y-137070600D02* +X125416667Y-137137266D01* +X125416667Y-137137266D02* +X125350000Y-137070600D01* +X125350000Y-137070600D02* +X125416667Y-137003933D01* +X125416667Y-137003933D02* +X125416667Y-137137266D01* +X125883334Y-136203933D02* +X126416667Y-136203933D01* +X126083334Y-135737266D02* +X126083334Y-136937266D01* +X126083334Y-136937266D02* +X126150001Y-137070600D01* +X126150001Y-137070600D02* +X126283334Y-137137266D01* +X126283334Y-137137266D02* +X126416667Y-137137266D01* +X127416667Y-137070600D02* +X127283334Y-137137266D01* +X127283334Y-137137266D02* +X127016667Y-137137266D01* +X127016667Y-137137266D02* +X126883334Y-137070600D01* +X126883334Y-137070600D02* +X126816667Y-136937266D01* +X126816667Y-136937266D02* +X126816667Y-136403933D01* +X126816667Y-136403933D02* +X126883334Y-136270600D01* +X126883334Y-136270600D02* +X127016667Y-136203933D01* +X127016667Y-136203933D02* +X127283334Y-136203933D01* +X127283334Y-136203933D02* +X127416667Y-136270600D01* +X127416667Y-136270600D02* +X127483334Y-136403933D01* +X127483334Y-136403933D02* +X127483334Y-136537266D01* +X127483334Y-136537266D02* +X126816667Y-136670600D01* +X128683334Y-137070600D02* +X128550001Y-137137266D01* +X128550001Y-137137266D02* +X128283334Y-137137266D01* +X128283334Y-137137266D02* +X128150001Y-137070600D01* +X128150001Y-137070600D02* +X128083334Y-137003933D01* +X128083334Y-137003933D02* +X128016667Y-136870600D01* +X128016667Y-136870600D02* +X128016667Y-136470600D01* +X128016667Y-136470600D02* +X128083334Y-136337266D01* +X128083334Y-136337266D02* +X128150001Y-136270600D01* +X128150001Y-136270600D02* +X128283334Y-136203933D01* +X128283334Y-136203933D02* +X128550001Y-136203933D01* +X128550001Y-136203933D02* +X128683334Y-136270600D01* +X129283334Y-137137266D02* +X129283334Y-135737266D01* +X129883334Y-137137266D02* +X129883334Y-136403933D01* +X129883334Y-136403933D02* +X129816667Y-136270600D01* +X129816667Y-136270600D02* +X129683334Y-136203933D01* +X129683334Y-136203933D02* +X129483334Y-136203933D01* +X129483334Y-136203933D02* +X129350001Y-136270600D01* +X129350001Y-136270600D02* +X129283334Y-136337266D01* +D13* +X185603733Y-92511196D02* +X186670400Y-92511196D01* +X184994210Y-92892148D02* +X186137067Y-93273101D01* +X186137067Y-93273101D02* +X186137067Y-92282624D01* +X185146590Y-90835005D02* +X185070400Y-90987386D01* +X185070400Y-90987386D02* +X185070400Y-91215957D01* +X185070400Y-91215957D02* +X185146590Y-91444529D01* +X185146590Y-91444529D02* +X185298971Y-91596910D01* +X185298971Y-91596910D02* +X185451352Y-91673100D01* +X185451352Y-91673100D02* +X185756114Y-91749291D01* +X185756114Y-91749291D02* +X185984686Y-91749291D01* +X185984686Y-91749291D02* +X186289448Y-91673100D01* +X186289448Y-91673100D02* +X186441829Y-91596910D01* +X186441829Y-91596910D02* +X186594210Y-91444529D01* +X186594210Y-91444529D02* +X186670400Y-91215957D01* +X186670400Y-91215957D02* +X186670400Y-91063576D01* +X186670400Y-91063576D02* +X186594210Y-90835005D01* +X186594210Y-90835005D02* +X186518019Y-90758814D01* +X186518019Y-90758814D02* +X185984686Y-90758814D01* +X185984686Y-90758814D02* +X185984686Y-91063576D01* +X186670400Y-88854052D02* +X185070400Y-88854052D01* +X185070400Y-88854052D02* +X186670400Y-87939766D01* +X186670400Y-87939766D02* +X185070400Y-87939766D01* +X185070400Y-87406434D02* +X185070400Y-86492148D01* +X186670400Y-86949291D02* +X185070400Y-86949291D01* +X186670400Y-85044528D02* +X185908495Y-85577862D01* +X186670400Y-85958814D02* +X185070400Y-85958814D01* +X185070400Y-85958814D02* +X185070400Y-85349290D01* +X185070400Y-85349290D02* +X185146590Y-85196909D01* +X185146590Y-85196909D02* +X185222781Y-85120719D01* +X185222781Y-85120719D02* +X185375162Y-85044528D01* +X185375162Y-85044528D02* +X185603733Y-85044528D01* +X185603733Y-85044528D02* +X185756114Y-85120719D01* +X185756114Y-85120719D02* +X185832305Y-85196909D01* +X185832305Y-85196909D02* +X185908495Y-85349290D01* +X185908495Y-85349290D02* +X185908495Y-85958814D01* +X186670400Y-84358814D02* +X185070400Y-84358814D01* +X186670400Y-83596909D02* +X185070400Y-83596909D01* +X185070400Y-83596909D02* +X185070400Y-82987385D01* +X185070400Y-82987385D02* +X185146590Y-82835004D01* +X185146590Y-82835004D02* +X185222781Y-82758814D01* +X185222781Y-82758814D02* +X185375162Y-82682623D01* +X185375162Y-82682623D02* +X185603733Y-82682623D01* +X185603733Y-82682623D02* +X185756114Y-82758814D01* +X185756114Y-82758814D02* +X185832305Y-82835004D01* +X185832305Y-82835004D02* +X185908495Y-82987385D01* +X185908495Y-82987385D02* +X185908495Y-83596909D01* +X186670400Y-80777861D02* +X185070400Y-80777861D01* +X185070400Y-80777861D02* +X186213257Y-80244528D01* +X186213257Y-80244528D02* +X185070400Y-79711194D01* +X185070400Y-79711194D02* +X186670400Y-79711194D01* +X186213257Y-79025481D02* +X186213257Y-78263576D01* +X186670400Y-79177862D02* +X185070400Y-78644528D01* +X185070400Y-78644528D02* +X186670400Y-78111195D01* +X186594210Y-77654052D02* +X186670400Y-77425480D01* +X186670400Y-77425480D02* +X186670400Y-77044528D01* +X186670400Y-77044528D02* +X186594210Y-76892147D01* +X186594210Y-76892147D02* +X186518019Y-76815956D01* +X186518019Y-76815956D02* +X186365638Y-76739766D01* +X186365638Y-76739766D02* +X186213257Y-76739766D01* +X186213257Y-76739766D02* +X186060876Y-76815956D01* +X186060876Y-76815956D02* +X185984686Y-76892147D01* +X185984686Y-76892147D02* +X185908495Y-77044528D01* +X185908495Y-77044528D02* +X185832305Y-77349290D01* +X185832305Y-77349290D02* +X185756114Y-77501671D01* +X185756114Y-77501671D02* +X185679924Y-77577861D01* +X185679924Y-77577861D02* +X185527543Y-77654052D01* +X185527543Y-77654052D02* +X185375162Y-77654052D01* +X185375162Y-77654052D02* +X185222781Y-77577861D01* +X185222781Y-77577861D02* +X185146590Y-77501671D01* +X185146590Y-77501671D02* +X185070400Y-77349290D01* +X185070400Y-77349290D02* +X185070400Y-76968337D01* +X185070400Y-76968337D02* +X185146590Y-76739766D01* +X185070400Y-76282623D02* +X185070400Y-75368337D01* +X186670400Y-75825480D02* +X185070400Y-75825480D01* +X185832305Y-74835003D02* +X185832305Y-74301670D01* +X186670400Y-74073098D02* +X186670400Y-74835003D01* +X186670400Y-74835003D02* +X185070400Y-74835003D01* +X185070400Y-74835003D02* +X185070400Y-74073098D01* +X186670400Y-72473098D02* +X185908495Y-73006432D01* +X186670400Y-73387384D02* +X185070400Y-73387384D01* +X185070400Y-73387384D02* +X185070400Y-72777860D01* +X185070400Y-72777860D02* +X185146590Y-72625479D01* +X185146590Y-72625479D02* +X185222781Y-72549289D01* +X185222781Y-72549289D02* +X185375162Y-72473098D01* +X185375162Y-72473098D02* +X185603733Y-72473098D01* +X185603733Y-72473098D02* +X185756114Y-72549289D01* +X185756114Y-72549289D02* +X185832305Y-72625479D01* +X185832305Y-72625479D02* +X185908495Y-72777860D01* +X185908495Y-72777860D02* +X185908495Y-73387384D01* +D14* +X109084506Y-66457100D02* +X109341649Y-66542814D01* +X109341649Y-66542814D02* +X109770220Y-66542814D01* +X109770220Y-66542814D02* +X109941649Y-66457100D01* +X109941649Y-66457100D02* +X110027363Y-66371385D01* +X110027363Y-66371385D02* +X110113077Y-66199957D01* +X110113077Y-66199957D02* +X110113077Y-66028528D01* +X110113077Y-66028528D02* +X110027363Y-65857100D01* +X110027363Y-65857100D02* +X109941649Y-65771385D01* +X109941649Y-65771385D02* +X109770220Y-65685671D01* +X109770220Y-65685671D02* +X109427363Y-65599957D01* +X109427363Y-65599957D02* +X109255934Y-65514242D01* +X109255934Y-65514242D02* +X109170220Y-65428528D01* +X109170220Y-65428528D02* +X109084506Y-65257100D01* +X109084506Y-65257100D02* +X109084506Y-65085671D01* +X109084506Y-65085671D02* +X109170220Y-64914242D01* +X109170220Y-64914242D02* +X109255934Y-64828528D01* +X109255934Y-64828528D02* +X109427363Y-64742814D01* +X109427363Y-64742814D02* +X109855934Y-64742814D01* +X109855934Y-64742814D02* +X110113077Y-64828528D01* +X110627363Y-64742814D02* +X111655935Y-64742814D01* +X111141649Y-66542814D02* +X111141649Y-64742814D01* +X112255935Y-66542814D02* +X112255935Y-64742814D01* +X112255935Y-64742814D02* +X112855935Y-66028528D01* +X112855935Y-66028528D02* +X113455935Y-64742814D01* +X113455935Y-64742814D02* +X113455935Y-66542814D01* +X114141649Y-64742814D02* +X115255935Y-64742814D01* +X115255935Y-64742814D02* +X114655935Y-65428528D01* +X114655935Y-65428528D02* +X114913078Y-65428528D01* +X114913078Y-65428528D02* +X115084507Y-65514242D01* +X115084507Y-65514242D02* +X115170221Y-65599957D01* +X115170221Y-65599957D02* +X115255935Y-65771385D01* +X115255935Y-65771385D02* +X115255935Y-66199957D01* +X115255935Y-66199957D02* +X115170221Y-66371385D01* +X115170221Y-66371385D02* +X115084507Y-66457100D01* +X115084507Y-66457100D02* +X114913078Y-66542814D01* +X114913078Y-66542814D02* +X114398792Y-66542814D01* +X114398792Y-66542814D02* +X114227364Y-66457100D01* +X114227364Y-66457100D02* +X114141649Y-66371385D01* +X115941650Y-64914242D02* +X116027364Y-64828528D01* +X116027364Y-64828528D02* +X116198793Y-64742814D01* +X116198793Y-64742814D02* +X116627364Y-64742814D01* +X116627364Y-64742814D02* +X116798793Y-64828528D01* +X116798793Y-64828528D02* +X116884507Y-64914242D01* +X116884507Y-64914242D02* +X116970221Y-65085671D01* +X116970221Y-65085671D02* +X116970221Y-65257100D01* +X116970221Y-65257100D02* +X116884507Y-65514242D01* +X116884507Y-65514242D02* +X115855935Y-66542814D01* +X115855935Y-66542814D02* +X116970221Y-66542814D01* +X118341650Y-65599957D02* +X117741650Y-65599957D01* +X117741650Y-66542814D02* +X117741650Y-64742814D01* +X117741650Y-64742814D02* +X118598793Y-64742814D01* +X120055936Y-65342814D02* +X120055936Y-66542814D01* +X119627364Y-64657100D02* +X119198793Y-65942814D01* +X119198793Y-65942814D02* +X120313078Y-65942814D01* +X121941650Y-66542814D02* +X120913079Y-66542814D01* +X121427364Y-66542814D02* +X121427364Y-64742814D01* +X121427364Y-64742814D02* +X121255936Y-64999957D01* +X121255936Y-64999957D02* +X121084507Y-65171385D01* +X121084507Y-65171385D02* +X120913079Y-65257100D01* +X123655936Y-66542814D02* +X122627365Y-66542814D01* +X123141650Y-66542814D02* +X123141650Y-64742814D01* +X123141650Y-64742814D02* +X122970222Y-64999957D01* +X122970222Y-64999957D02* +X122798793Y-65171385D01* +X122798793Y-65171385D02* +X122627365Y-65257100D01* +X126398794Y-65599957D02* +X126655937Y-65685671D01* +X126655937Y-65685671D02* +X126741651Y-65771385D01* +X126741651Y-65771385D02* +X126827365Y-65942814D01* +X126827365Y-65942814D02* +X126827365Y-66199957D01* +X126827365Y-66199957D02* +X126741651Y-66371385D01* +X126741651Y-66371385D02* +X126655937Y-66457100D01* +X126655937Y-66457100D02* +X126484508Y-66542814D01* +X126484508Y-66542814D02* +X125798794Y-66542814D01* +X125798794Y-66542814D02* +X125798794Y-64742814D01* +X125798794Y-64742814D02* +X126398794Y-64742814D01* +X126398794Y-64742814D02* +X126570223Y-64828528D01* +X126570223Y-64828528D02* +X126655937Y-64914242D01* +X126655937Y-64914242D02* +X126741651Y-65085671D01* +X126741651Y-65085671D02* +X126741651Y-65257100D01* +X126741651Y-65257100D02* +X126655937Y-65428528D01* +X126655937Y-65428528D02* +X126570223Y-65514242D01* +X126570223Y-65514242D02* +X126398794Y-65599957D01* +X126398794Y-65599957D02* +X125798794Y-65599957D01* +X128455937Y-66542814D02* +X127598794Y-66542814D01* +X127598794Y-66542814D02* +X127598794Y-64742814D01* +X128970223Y-66028528D02* +X129827366Y-66028528D01* +X128798794Y-66542814D02* +X129398794Y-64742814D01* +X129398794Y-64742814D02* +X129998794Y-66542814D01* +X131627365Y-66371385D02* +X131541651Y-66457100D01* +X131541651Y-66457100D02* +X131284508Y-66542814D01* +X131284508Y-66542814D02* +X131113080Y-66542814D01* +X131113080Y-66542814D02* +X130855937Y-66457100D01* +X130855937Y-66457100D02* +X130684508Y-66285671D01* +X130684508Y-66285671D02* +X130598794Y-66114242D01* +X130598794Y-66114242D02* +X130513080Y-65771385D01* +X130513080Y-65771385D02* +X130513080Y-65514242D01* +X130513080Y-65514242D02* +X130598794Y-65171385D01* +X130598794Y-65171385D02* +X130684508Y-64999957D01* +X130684508Y-64999957D02* +X130855937Y-64828528D01* +X130855937Y-64828528D02* +X131113080Y-64742814D01* +X131113080Y-64742814D02* +X131284508Y-64742814D01* +X131284508Y-64742814D02* +X131541651Y-64828528D01* +X131541651Y-64828528D02* +X131627365Y-64914242D01* +X132398794Y-66542814D02* +X132398794Y-64742814D01* +X133427365Y-66542814D02* +X132655937Y-65514242D01* +X133427365Y-64742814D02* +X132398794Y-65771385D01* +X134198794Y-66542814D02* +X134198794Y-64742814D01* +X134198794Y-64742814D02* +X134884508Y-64742814D01* +X134884508Y-64742814D02* +X135055937Y-64828528D01* +X135055937Y-64828528D02* +X135141651Y-64914242D01* +X135141651Y-64914242D02* +X135227365Y-65085671D01* +X135227365Y-65085671D02* +X135227365Y-65342814D01* +X135227365Y-65342814D02* +X135141651Y-65514242D01* +X135141651Y-65514242D02* +X135055937Y-65599957D01* +X135055937Y-65599957D02* +X134884508Y-65685671D01* +X134884508Y-65685671D02* +X134198794Y-65685671D01* +X135998794Y-66542814D02* +X135998794Y-64742814D01* +X137713080Y-66542814D02* +X136855937Y-66542814D01* +X136855937Y-66542814D02* +X136855937Y-64742814D01* +X139170223Y-66542814D02* +X138313080Y-66542814D01* +X138313080Y-66542814D02* +X138313080Y-64742814D01* +X115184507Y-108328528D02* +X116041650Y-108328528D01* +X115013078Y-108842814D02* +X115613078Y-107042814D01* +X115613078Y-107042814D02* +X116213078Y-108842814D01* +X116813078Y-108842814D02* +X116813078Y-107642814D01* +X116813078Y-107985671D02* +X116898792Y-107814242D01* +X116898792Y-107814242D02* +X116984507Y-107728528D01* +X116984507Y-107728528D02* +X117155935Y-107642814D01* +X117155935Y-107642814D02* +X117327364Y-107642814D01* +X118698793Y-108842814D02* +X118698793Y-107042814D01* +X118698793Y-108757100D02* +X118527364Y-108842814D01* +X118527364Y-108842814D02* +X118184507Y-108842814D01* +X118184507Y-108842814D02* +X118013078Y-108757100D01* +X118013078Y-108757100D02* +X117927364Y-108671385D01* +X117927364Y-108671385D02* +X117841650Y-108499957D01* +X117841650Y-108499957D02* +X117841650Y-107985671D01* +X117841650Y-107985671D02* +X117927364Y-107814242D01* +X117927364Y-107814242D02* +X118013078Y-107728528D01* +X118013078Y-107728528D02* +X118184507Y-107642814D01* +X118184507Y-107642814D02* +X118527364Y-107642814D01* +X118527364Y-107642814D02* +X118698793Y-107728528D01* +X120327364Y-107642814D02* +X120327364Y-108842814D01* +X119555935Y-107642814D02* +X119555935Y-108585671D01* +X119555935Y-108585671D02* +X119641649Y-108757100D01* +X119641649Y-108757100D02* +X119813078Y-108842814D01* +X119813078Y-108842814D02* +X120070221Y-108842814D01* +X120070221Y-108842814D02* +X120241649Y-108757100D01* +X120241649Y-108757100D02* +X120327364Y-108671385D01* +X121098792Y-108757100D02* +X121355935Y-108842814D01* +X121355935Y-108842814D02* +X121784506Y-108842814D01* +X121784506Y-108842814D02* +X121955935Y-108757100D01* +X121955935Y-108757100D02* +X122041649Y-108671385D01* +X122041649Y-108671385D02* +X122127363Y-108499957D01* +X122127363Y-108499957D02* +X122127363Y-108328528D01* +X122127363Y-108328528D02* +X122041649Y-108157100D01* +X122041649Y-108157100D02* +X121955935Y-108071385D01* +X121955935Y-108071385D02* +X121784506Y-107985671D01* +X121784506Y-107985671D02* +X121441649Y-107899957D01* +X121441649Y-107899957D02* +X121270220Y-107814242D01* +X121270220Y-107814242D02* +X121184506Y-107728528D01* +X121184506Y-107728528D02* +X121098792Y-107557100D01* +X121098792Y-107557100D02* +X121098792Y-107385671D01* +X121098792Y-107385671D02* +X121184506Y-107214242D01* +X121184506Y-107214242D02* +X121270220Y-107128528D01* +X121270220Y-107128528D02* +X121441649Y-107042814D01* +X121441649Y-107042814D02* +X121870220Y-107042814D01* +X121870220Y-107042814D02* +X122127363Y-107128528D01* +X122898792Y-108842814D02* +X122898792Y-107642814D01* +X122898792Y-107042814D02* +X122813078Y-107128528D01* +X122813078Y-107128528D02* +X122898792Y-107214242D01* +X122898792Y-107214242D02* +X122984506Y-107128528D01* +X122984506Y-107128528D02* +X122898792Y-107042814D01* +X122898792Y-107042814D02* +X122898792Y-107214242D01* +X123755935Y-108842814D02* +X123755935Y-107642814D01* +X123755935Y-107814242D02* +X123841649Y-107728528D01* +X123841649Y-107728528D02* +X124013078Y-107642814D01* +X124013078Y-107642814D02* +X124270221Y-107642814D01* +X124270221Y-107642814D02* +X124441649Y-107728528D01* +X124441649Y-107728528D02* +X124527364Y-107899957D01* +X124527364Y-107899957D02* +X124527364Y-108842814D01* +X124527364Y-107899957D02* +X124613078Y-107728528D01* +X124613078Y-107728528D02* +X124784506Y-107642814D01* +X124784506Y-107642814D02* +X125041649Y-107642814D01* +X125041649Y-107642814D02* +X125213078Y-107728528D01* +X125213078Y-107728528D02* +X125298792Y-107899957D01* +X125298792Y-107899957D02* +X125298792Y-108842814D01* +X126155935Y-107642814D02* +X126155935Y-109442814D01* +X126155935Y-107728528D02* +X126327364Y-107642814D01* +X126327364Y-107642814D02* +X126670221Y-107642814D01* +X126670221Y-107642814D02* +X126841649Y-107728528D01* +X126841649Y-107728528D02* +X126927364Y-107814242D01* +X126927364Y-107814242D02* +X127013078Y-107985671D01* +X127013078Y-107985671D02* +X127013078Y-108499957D01* +X127013078Y-108499957D02* +X126927364Y-108671385D01* +X126927364Y-108671385D02* +X126841649Y-108757100D01* +X126841649Y-108757100D02* +X126670221Y-108842814D01* +X126670221Y-108842814D02* +X126327364Y-108842814D01* +X126327364Y-108842814D02* +X126155935Y-108757100D01* +X128041649Y-108842814D02* +X127870220Y-108757100D01* +X127870220Y-108757100D02* +X127784506Y-108585671D01* +X127784506Y-108585671D02* +X127784506Y-107042814D01* +X129413077Y-108757100D02* +X129241649Y-108842814D01* +X129241649Y-108842814D02* +X128898792Y-108842814D01* +X128898792Y-108842814D02* +X128727363Y-108757100D01* +X128727363Y-108757100D02* +X128641649Y-108585671D01* +X128641649Y-108585671D02* +X128641649Y-107899957D01* +X128641649Y-107899957D02* +X128727363Y-107728528D01* +X128727363Y-107728528D02* +X128898792Y-107642814D01* +X128898792Y-107642814D02* +X129241649Y-107642814D01* +X129241649Y-107642814D02* +X129413077Y-107728528D01* +X129413077Y-107728528D02* +X129498792Y-107899957D01* +X129498792Y-107899957D02* +X129498792Y-108071385D01* +X129498792Y-108071385D02* +X128641649Y-108242814D01* +X131555935Y-108757100D02* +X131727363Y-108842814D01* +X131727363Y-108842814D02* +X132070220Y-108842814D01* +X132070220Y-108842814D02* +X132241649Y-108757100D01* +X132241649Y-108757100D02* +X132327363Y-108585671D01* +X132327363Y-108585671D02* +X132327363Y-108499957D01* +X132327363Y-108499957D02* +X132241649Y-108328528D01* +X132241649Y-108328528D02* +X132070220Y-108242814D01* +X132070220Y-108242814D02* +X131813078Y-108242814D01* +X131813078Y-108242814D02* +X131641649Y-108157100D01* +X131641649Y-108157100D02* +X131555935Y-107985671D01* +X131555935Y-107985671D02* +X131555935Y-107899957D01* +X131555935Y-107899957D02* +X131641649Y-107728528D01* +X131641649Y-107728528D02* +X131813078Y-107642814D01* +X131813078Y-107642814D02* +X132070220Y-107642814D01* +X132070220Y-107642814D02* +X132241649Y-107728528D01* +X133098792Y-108842814D02* +X133098792Y-107642814D01* +X133098792Y-107042814D02* +X133013078Y-107128528D01* +X133013078Y-107128528D02* +X133098792Y-107214242D01* +X133098792Y-107214242D02* +X133184506Y-107128528D01* +X133184506Y-107128528D02* +X133098792Y-107042814D01* +X133098792Y-107042814D02* +X133098792Y-107214242D01* +X133955935Y-108842814D02* +X133955935Y-107642814D01* +X133955935Y-107814242D02* +X134041649Y-107728528D01* +X134041649Y-107728528D02* +X134213078Y-107642814D01* +X134213078Y-107642814D02* +X134470221Y-107642814D01* +X134470221Y-107642814D02* +X134641649Y-107728528D01* +X134641649Y-107728528D02* +X134727364Y-107899957D01* +X134727364Y-107899957D02* +X134727364Y-108842814D01* +X134727364Y-107899957D02* +X134813078Y-107728528D01* +X134813078Y-107728528D02* +X134984506Y-107642814D01* +X134984506Y-107642814D02* +X135241649Y-107642814D01* +X135241649Y-107642814D02* +X135413078Y-107728528D01* +X135413078Y-107728528D02* +X135498792Y-107899957D01* +X135498792Y-107899957D02* +X135498792Y-108842814D01* +X136355935Y-107642814D02* +X136355935Y-109442814D01* +X136355935Y-107728528D02* +X136527364Y-107642814D01* +X136527364Y-107642814D02* +X136870221Y-107642814D01* +X136870221Y-107642814D02* +X137041649Y-107728528D01* +X137041649Y-107728528D02* +X137127364Y-107814242D01* +X137127364Y-107814242D02* +X137213078Y-107985671D01* +X137213078Y-107985671D02* +X137213078Y-108499957D01* +X137213078Y-108499957D02* +X137127364Y-108671385D01* +X137127364Y-108671385D02* +X137041649Y-108757100D01* +X137041649Y-108757100D02* +X136870221Y-108842814D01* +X136870221Y-108842814D02* +X136527364Y-108842814D01* +X136527364Y-108842814D02* +X136355935Y-108757100D01* +X138241649Y-108842814D02* +X138070220Y-108757100D01* +X138070220Y-108757100D02* +X137984506Y-108585671D01* +X137984506Y-108585671D02* +X137984506Y-107042814D01* +X139613077Y-108757100D02* +X139441649Y-108842814D01* +X139441649Y-108842814D02* +X139098792Y-108842814D01* +X139098792Y-108842814D02* +X138927363Y-108757100D01* +X138927363Y-108757100D02* +X138841649Y-108585671D01* +X138841649Y-108585671D02* +X138841649Y-107899957D01* +X138841649Y-107899957D02* +X138927363Y-107728528D01* +X138927363Y-107728528D02* +X139098792Y-107642814D01* +X139098792Y-107642814D02* +X139441649Y-107642814D01* +X139441649Y-107642814D02* +X139613077Y-107728528D01* +X139613077Y-107728528D02* +X139698792Y-107899957D01* +X139698792Y-107899957D02* +X139698792Y-108071385D01* +X139698792Y-108071385D02* +X138841649Y-108242814D01* +X141498791Y-108842814D02* +X140898791Y-107985671D01* +X140470220Y-108842814D02* +X140470220Y-107042814D01* +X140470220Y-107042814D02* +X141155934Y-107042814D01* +X141155934Y-107042814D02* +X141327363Y-107128528D01* +X141327363Y-107128528D02* +X141413077Y-107214242D01* +X141413077Y-107214242D02* +X141498791Y-107385671D01* +X141498791Y-107385671D02* +X141498791Y-107642814D01* +X141498791Y-107642814D02* +X141413077Y-107814242D01* +X141413077Y-107814242D02* +X141327363Y-107899957D01* +X141327363Y-107899957D02* +X141155934Y-107985671D01* +X141155934Y-107985671D02* +X140470220Y-107985671D01* +X142013077Y-107042814D02* +X143041649Y-107042814D01* +X142527363Y-108842814D02* +X142527363Y-107042814D01* +X143641649Y-108842814D02* +X143641649Y-107042814D01* +X144670220Y-108842814D02* +X143898792Y-107814242D01* +X144670220Y-107042814D02* +X143641649Y-108071385D01* +X145355935Y-107214242D02* +X145441649Y-107128528D01* +X145441649Y-107128528D02* +X145613078Y-107042814D01* +X145613078Y-107042814D02* +X146041649Y-107042814D01* +X146041649Y-107042814D02* +X146213078Y-107128528D01* +X146213078Y-107128528D02* +X146298792Y-107214242D01* +X146298792Y-107214242D02* +X146384506Y-107385671D01* +X146384506Y-107385671D02* +X146384506Y-107557100D01* +X146384506Y-107557100D02* +X146298792Y-107814242D01* +X146298792Y-107814242D02* +X145270220Y-108842814D01* +X145270220Y-108842814D02* +X146384506Y-108842814D01* +X147755935Y-107899957D02* +X148013078Y-107985671D01* +X148013078Y-107985671D02* +X148098792Y-108071385D01* +X148098792Y-108071385D02* +X148184506Y-108242814D01* +X148184506Y-108242814D02* +X148184506Y-108499957D01* +X148184506Y-108499957D02* +X148098792Y-108671385D01* +X148098792Y-108671385D02* +X148013078Y-108757100D01* +X148013078Y-108757100D02* +X147841649Y-108842814D01* +X147841649Y-108842814D02* +X147155935Y-108842814D01* +X147155935Y-108842814D02* +X147155935Y-107042814D01* +X147155935Y-107042814D02* +X147755935Y-107042814D01* +X147755935Y-107042814D02* +X147927364Y-107128528D01* +X147927364Y-107128528D02* +X148013078Y-107214242D01* +X148013078Y-107214242D02* +X148098792Y-107385671D01* +X148098792Y-107385671D02* +X148098792Y-107557100D01* +X148098792Y-107557100D02* +X148013078Y-107728528D01* +X148013078Y-107728528D02* +X147927364Y-107814242D01* +X147927364Y-107814242D02* +X147755935Y-107899957D01* +X147755935Y-107899957D02* +X147155935Y-107899957D01* +X150327364Y-108842814D02* +X150327364Y-107042814D01* +X150327364Y-107042814D02* +X151013078Y-107042814D01* +X151013078Y-107042814D02* +X151184507Y-107128528D01* +X151184507Y-107128528D02* +X151270221Y-107214242D01* +X151270221Y-107214242D02* +X151355935Y-107385671D01* +X151355935Y-107385671D02* +X151355935Y-107642814D01* +X151355935Y-107642814D02* +X151270221Y-107814242D01* +X151270221Y-107814242D02* +X151184507Y-107899957D01* +X151184507Y-107899957D02* +X151013078Y-107985671D01* +X151013078Y-107985671D02* +X150327364Y-107985671D01* +X152127364Y-108842814D02* +X152127364Y-107642814D01* +X152127364Y-107985671D02* +X152213078Y-107814242D01* +X152213078Y-107814242D02* +X152298793Y-107728528D01* +X152298793Y-107728528D02* +X152470221Y-107642814D01* +X152470221Y-107642814D02* +X152641650Y-107642814D01* +X153498793Y-108842814D02* +X153327364Y-108757100D01* +X153327364Y-108757100D02* +X153241650Y-108671385D01* +X153241650Y-108671385D02* +X153155936Y-108499957D01* +X153155936Y-108499957D02* +X153155936Y-107985671D01* +X153155936Y-107985671D02* +X153241650Y-107814242D01* +X153241650Y-107814242D02* +X153327364Y-107728528D01* +X153327364Y-107728528D02* +X153498793Y-107642814D01* +X153498793Y-107642814D02* +X153755936Y-107642814D01* +X153755936Y-107642814D02* +X153927364Y-107728528D01* +X153927364Y-107728528D02* +X154013079Y-107814242D01* +X154013079Y-107814242D02* +X154098793Y-107985671D01* +X154098793Y-107985671D02* +X154098793Y-108499957D01* +X154098793Y-108499957D02* +X154013079Y-108671385D01* +X154013079Y-108671385D02* +X153927364Y-108757100D01* +X153927364Y-108757100D02* +X153755936Y-108842814D01* +X153755936Y-108842814D02* +X153498793Y-108842814D01* +D15* +X84074695Y-75935715D02* +X84074695Y-76802382D01* +X82712790Y-77173810D02* +X82712790Y-75935715D01* +X82712790Y-75935715D02* +X85312790Y-75935715D01* +X85312790Y-75935715D02* +X85312790Y-77173810D01* +X82712790Y-78288096D02* +X85312790Y-78288096D01* +X82712790Y-79526191D02* +X85312790Y-79526191D01* +X85312790Y-79526191D02* +X82712790Y-81011905D01* +X82712790Y-81011905D02* +X85312790Y-81011905D01* +X83455647Y-82126192D02* +X83455647Y-83364287D01* +X82712790Y-81878573D02* +X85312790Y-82745239D01* +X85312790Y-82745239D02* +X82712790Y-83611906D01* +X82712790Y-85964286D02* +X83950885Y-85097620D01* +X82712790Y-84478572D02* +X85312790Y-84478572D01* +X85312790Y-84478572D02* +X85312790Y-85469048D01* +X85312790Y-85469048D02* +X85188980Y-85716667D01* +X85188980Y-85716667D02* +X85065171Y-85840477D01* +X85065171Y-85840477D02* +X84817552Y-85964286D01* +X84817552Y-85964286D02* +X84446123Y-85964286D01* +X84446123Y-85964286D02* +X84198504Y-85840477D01* +X84198504Y-85840477D02* +X84074695Y-85716667D01* +X84074695Y-85716667D02* +X83950885Y-85469048D01* +X83950885Y-85469048D02* +X83950885Y-84478572D01* +X84074695Y-87945239D02* +X83950885Y-88316667D01* +X83950885Y-88316667D02* +X83827076Y-88440477D01* +X83827076Y-88440477D02* +X83579457Y-88564286D01* +X83579457Y-88564286D02* +X83208028Y-88564286D01* +X83208028Y-88564286D02* +X82960409Y-88440477D01* +X82960409Y-88440477D02* +X82836600Y-88316667D01* +X82836600Y-88316667D02* +X82712790Y-88069048D01* +X82712790Y-88069048D02* +X82712790Y-87078572D01* +X82712790Y-87078572D02* +X85312790Y-87078572D01* +X85312790Y-87078572D02* +X85312790Y-87945239D01* +X85312790Y-87945239D02* +X85188980Y-88192858D01* +X85188980Y-88192858D02* +X85065171Y-88316667D01* +X85065171Y-88316667D02* +X84817552Y-88440477D01* +X84817552Y-88440477D02* +X84569933Y-88440477D01* +X84569933Y-88440477D02* +X84322314Y-88316667D01* +X84322314Y-88316667D02* +X84198504Y-88192858D01* +X84198504Y-88192858D02* +X84074695Y-87945239D01* +X84074695Y-87945239D02* +X84074695Y-87078572D01* +X82712790Y-90050001D02* +X82836600Y-89802382D01* +X82836600Y-89802382D02* +X82960409Y-89678572D01* +X82960409Y-89678572D02* +X83208028Y-89554763D01* +X83208028Y-89554763D02* +X83950885Y-89554763D01* +X83950885Y-89554763D02* +X84198504Y-89678572D01* +X84198504Y-89678572D02* +X84322314Y-89802382D01* +X84322314Y-89802382D02* +X84446123Y-90050001D01* +X84446123Y-90050001D02* +X84446123Y-90421429D01* +X84446123Y-90421429D02* +X84322314Y-90669048D01* +X84322314Y-90669048D02* +X84198504Y-90792858D01* +X84198504Y-90792858D02* +X83950885Y-90916667D01* +X83950885Y-90916667D02* +X83208028Y-90916667D01* +X83208028Y-90916667D02* +X82960409Y-90792858D01* +X82960409Y-90792858D02* +X82836600Y-90669048D01* +X82836600Y-90669048D02* +X82712790Y-90421429D01* +X82712790Y-90421429D02* +X82712790Y-90050001D01* +X82712790Y-93145239D02* +X84074695Y-93145239D01* +X84074695Y-93145239D02* +X84322314Y-93021429D01* +X84322314Y-93021429D02* +X84446123Y-92773810D01* +X84446123Y-92773810D02* +X84446123Y-92278572D01* +X84446123Y-92278572D02* +X84322314Y-92030953D01* +X82836600Y-93145239D02* +X82712790Y-92897620D01* +X82712790Y-92897620D02* +X82712790Y-92278572D01* +X82712790Y-92278572D02* +X82836600Y-92030953D01* +X82836600Y-92030953D02* +X83084219Y-91907144D01* +X83084219Y-91907144D02* +X83331838Y-91907144D01* +X83331838Y-91907144D02* +X83579457Y-92030953D01* +X83579457Y-92030953D02* +X83703266Y-92278572D01* +X83703266Y-92278572D02* +X83703266Y-92897620D01* +X83703266Y-92897620D02* +X83827076Y-93145239D01* +X82712790Y-94383334D02* +X84446123Y-94383334D01* +X83950885Y-94383334D02* +X84198504Y-94507144D01* +X84198504Y-94507144D02* +X84322314Y-94630953D01* +X84322314Y-94630953D02* +X84446123Y-94878572D01* +X84446123Y-94878572D02* +X84446123Y-95126191D01* +X82712790Y-97107144D02* +X85312790Y-97107144D01* +X82836600Y-97107144D02* +X82712790Y-96859525D01* +X82712790Y-96859525D02* +X82712790Y-96364287D01* +X82712790Y-96364287D02* +X82836600Y-96116668D01* +X82836600Y-96116668D02* +X82960409Y-95992858D01* +X82960409Y-95992858D02* +X83208028Y-95869049D01* +X83208028Y-95869049D02* +X83950885Y-95869049D01* +X83950885Y-95869049D02* +X84198504Y-95992858D01* +X84198504Y-95992858D02* +X84322314Y-96116668D01* +X84322314Y-96116668D02* +X84446123Y-96364287D01* +X84446123Y-96364287D02* +X84446123Y-96859525D01* +X84446123Y-96859525D02* +X84322314Y-97107144D01* +X82712790Y-102307143D02* +X85312790Y-102307143D01* +X84074695Y-102307143D02* +X84074695Y-103792857D01* +X82712790Y-103792857D02* +X85312790Y-103792857D01* +X84074695Y-105897620D02* +X83950885Y-106269048D01* +X83950885Y-106269048D02* +X83827076Y-106392858D01* +X83827076Y-106392858D02* +X83579457Y-106516667D01* +X83579457Y-106516667D02* +X83208028Y-106516667D01* +X83208028Y-106516667D02* +X82960409Y-106392858D01* +X82960409Y-106392858D02* +X82836600Y-106269048D01* +X82836600Y-106269048D02* +X82712790Y-106021429D01* +X82712790Y-106021429D02* +X82712790Y-105030953D01* +X82712790Y-105030953D02* +X85312790Y-105030953D01* +X85312790Y-105030953D02* +X85312790Y-105897620D01* +X85312790Y-105897620D02* +X85188980Y-106145239D01* +X85188980Y-106145239D02* +X85065171Y-106269048D01* +X85065171Y-106269048D02* +X84817552Y-106392858D01* +X84817552Y-106392858D02* +X84569933Y-106392858D01* +X84569933Y-106392858D02* +X84322314Y-106269048D01* +X84322314Y-106269048D02* +X84198504Y-106145239D01* +X84198504Y-106145239D02* +X84074695Y-105897620D01* +X84074695Y-105897620D02* +X84074695Y-105030953D01* +X85312790Y-108126191D02* +X85312790Y-108621429D01* +X85312790Y-108621429D02* +X85188980Y-108869048D01* +X85188980Y-108869048D02* +X84941361Y-109116667D01* +X84941361Y-109116667D02* +X84446123Y-109240477D01* +X84446123Y-109240477D02* +X83579457Y-109240477D01* +X83579457Y-109240477D02* +X83084219Y-109116667D01* +X83084219Y-109116667D02* +X82836600Y-108869048D01* +X82836600Y-108869048D02* +X82712790Y-108621429D01* +X82712790Y-108621429D02* +X82712790Y-108126191D01* +X82712790Y-108126191D02* +X82836600Y-107878572D01* +X82836600Y-107878572D02* +X83084219Y-107630953D01* +X83084219Y-107630953D02* +X83579457Y-107507144D01* +X83579457Y-107507144D02* +X84446123Y-107507144D01* +X84446123Y-107507144D02* +X84941361Y-107630953D01* +X84941361Y-107630953D02* +X85188980Y-107878572D01* +X85188980Y-107878572D02* +X85312790Y-108126191D01* +X85312790Y-110107144D02* +X82712790Y-111840477D01* +X85312790Y-111840477D02* +X82712790Y-110107144D01* +X82712790Y-116173810D02* +X82712790Y-114688096D01* +X82712790Y-115430953D02* +X85312790Y-115430953D01* +X85312790Y-115430953D02* +X84941361Y-115183334D01* +X84941361Y-115183334D02* +X84693742Y-114935715D01* +X84693742Y-114935715D02* +X84569933Y-114688096D01* +X82960409Y-117288095D02* +X82836600Y-117411905D01* +X82836600Y-117411905D02* +X82712790Y-117288095D01* +X82712790Y-117288095D02* +X82836600Y-117164286D01* +X82836600Y-117164286D02* +X82960409Y-117288095D01* +X82960409Y-117288095D02* +X82712790Y-117288095D01* +X85312790Y-119021428D02* +X85312790Y-119269047D01* +X85312790Y-119269047D02* +X85188980Y-119516666D01* +X85188980Y-119516666D02* +X85065171Y-119640476D01* +X85065171Y-119640476D02* +X84817552Y-119764285D01* +X84817552Y-119764285D02* +X84322314Y-119888095D01* +X84322314Y-119888095D02* +X83703266Y-119888095D01* +X83703266Y-119888095D02* +X83208028Y-119764285D01* +X83208028Y-119764285D02* +X82960409Y-119640476D01* +X82960409Y-119640476D02* +X82836600Y-119516666D01* +X82836600Y-119516666D02* +X82712790Y-119269047D01* +X82712790Y-119269047D02* +X82712790Y-119021428D01* +X82712790Y-119021428D02* +X82836600Y-118773809D01* +X82836600Y-118773809D02* +X82960409Y-118650000D01* +X82960409Y-118650000D02* +X83208028Y-118526190D01* +X83208028Y-118526190D02* +X83703266Y-118402381D01* +X83703266Y-118402381D02* +X84322314Y-118402381D01* +X84322314Y-118402381D02* +X84817552Y-118526190D01* +X84817552Y-118526190D02* +X85065171Y-118650000D01* +X85065171Y-118650000D02* +X85188980Y-118773809D01* +X85188980Y-118773809D02* +X85312790Y-119021428D01* +D16* +X167199983Y-58347919D02* +X166866650Y-57871728D01* +X166628555Y-58347919D02* +X166628555Y-57347919D01* +X166628555Y-57347919D02* +X167009507Y-57347919D01* +X167009507Y-57347919D02* +X167104745Y-57395538D01* +X167104745Y-57395538D02* +X167152364Y-57443157D01* +X167152364Y-57443157D02* +X167199983Y-57538395D01* +X167199983Y-57538395D02* +X167199983Y-57681252D01* +X167199983Y-57681252D02* +X167152364Y-57776490D01* +X167152364Y-57776490D02* +X167104745Y-57824109D01* +X167104745Y-57824109D02* +X167009507Y-57871728D01* +X167009507Y-57871728D02* +X166628555Y-57871728D01* +X167580936Y-57443157D02* +X167628555Y-57395538D01* +X167628555Y-57395538D02* +X167723793Y-57347919D01* +X167723793Y-57347919D02* +X167961888Y-57347919D01* +X167961888Y-57347919D02* +X168057126Y-57395538D01* +X168057126Y-57395538D02* +X168104745Y-57443157D01* +X168104745Y-57443157D02* +X168152364Y-57538395D01* +X168152364Y-57538395D02* +X168152364Y-57633633D01* +X168152364Y-57633633D02* +X168104745Y-57776490D01* +X168104745Y-57776490D02* +X167533317Y-58347919D01* +X167533317Y-58347919D02* +X168152364Y-58347919D01* +X117477364Y-43227919D02* +X117477364Y-42227919D01* +X117477364Y-42227919D02* +X117858316Y-42227919D01* +X117858316Y-42227919D02* +X117953554Y-42275538D01* +X117953554Y-42275538D02* +X118001173Y-42323157D01* +X118001173Y-42323157D02* +X118048792Y-42418395D01* +X118048792Y-42418395D02* +X118048792Y-42561252D01* +X118048792Y-42561252D02* +X118001173Y-42656490D01* +X118001173Y-42656490D02* +X117953554Y-42704109D01* +X117953554Y-42704109D02* +X117858316Y-42751728D01* +X117858316Y-42751728D02* +X117477364Y-42751728D01* +X119001173Y-43227919D02* +X118429745Y-43227919D01* +X118715459Y-43227919D02* +X118715459Y-42227919D01* +X118715459Y-42227919D02* +X118620221Y-42370776D01* +X118620221Y-42370776D02* +X118524983Y-42466014D01* +X118524983Y-42466014D02* +X118429745Y-42513633D01* +X119334507Y-42227919D02* +X119953554Y-42227919D01* +X119953554Y-42227919D02* +X119620221Y-42608871D01* +X119620221Y-42608871D02* +X119763078Y-42608871D01* +X119763078Y-42608871D02* +X119858316Y-42656490D01* +X119858316Y-42656490D02* +X119905935Y-42704109D01* +X119905935Y-42704109D02* +X119953554Y-42799347D01* +X119953554Y-42799347D02* +X119953554Y-43037442D01* +X119953554Y-43037442D02* +X119905935Y-43132680D01* +X119905935Y-43132680D02* +X119858316Y-43180300D01* +X119858316Y-43180300D02* +X119763078Y-43227919D01* +X119763078Y-43227919D02* +X119477364Y-43227919D01* +X119477364Y-43227919D02* +X119382126Y-43180300D01* +X119382126Y-43180300D02* +X119334507Y-43132680D01* +X100533316Y-76207919D02* +X100199983Y-75731728D01* +X99961888Y-76207919D02* +X99961888Y-75207919D01* +X99961888Y-75207919D02* +X100342840Y-75207919D01* +X100342840Y-75207919D02* +X100438078Y-75255538D01* +X100438078Y-75255538D02* +X100485697Y-75303157D01* +X100485697Y-75303157D02* +X100533316Y-75398395D01* +X100533316Y-75398395D02* +X100533316Y-75541252D01* +X100533316Y-75541252D02* +X100485697Y-75636490D01* +X100485697Y-75636490D02* +X100438078Y-75684109D01* +X100438078Y-75684109D02* +X100342840Y-75731728D01* +X100342840Y-75731728D02* +X99961888Y-75731728D01* +X100961888Y-76207919D02* +X100961888Y-75541252D01* +X100961888Y-75207919D02* +X100914269Y-75255538D01* +X100914269Y-75255538D02* +X100961888Y-75303157D01* +X100961888Y-75303157D02* +X101009507Y-75255538D01* +X101009507Y-75255538D02* +X100961888Y-75207919D01* +X100961888Y-75207919D02* +X100961888Y-75303157D01* +X101866649Y-75541252D02* +X101866649Y-76350776D01* +X101866649Y-76350776D02* +X101819030Y-76446014D01* +X101819030Y-76446014D02* +X101771411Y-76493633D01* +X101771411Y-76493633D02* +X101676173Y-76541252D01* +X101676173Y-76541252D02* +X101533316Y-76541252D01* +X101533316Y-76541252D02* +X101438078Y-76493633D01* +X101866649Y-76160300D02* +X101771411Y-76207919D01* +X101771411Y-76207919D02* +X101580935Y-76207919D01* +X101580935Y-76207919D02* +X101485697Y-76160300D01* +X101485697Y-76160300D02* +X101438078Y-76112680D01* +X101438078Y-76112680D02* +X101390459Y-76017442D01* +X101390459Y-76017442D02* +X101390459Y-75731728D01* +X101390459Y-75731728D02* +X101438078Y-75636490D01* +X101438078Y-75636490D02* +X101485697Y-75588871D01* +X101485697Y-75588871D02* +X101580935Y-75541252D01* +X101580935Y-75541252D02* +X101771411Y-75541252D01* +X101771411Y-75541252D02* +X101866649Y-75588871D01* +X102342840Y-76207919D02* +X102342840Y-75207919D01* +X102342840Y-75588871D02* +X102438078Y-75541252D01* +X102438078Y-75541252D02* +X102628554Y-75541252D01* +X102628554Y-75541252D02* +X102723792Y-75588871D01* +X102723792Y-75588871D02* +X102771411Y-75636490D01* +X102771411Y-75636490D02* +X102819030Y-75731728D01* +X102819030Y-75731728D02* +X102819030Y-76017442D01* +X102819030Y-76017442D02* +X102771411Y-76112680D01* +X102771411Y-76112680D02* +X102723792Y-76160300D01* +X102723792Y-76160300D02* +X102628554Y-76207919D01* +X102628554Y-76207919D02* +X102438078Y-76207919D01* +X102438078Y-76207919D02* +X102342840Y-76160300D01* +X171146469Y-66942147D02* +X170146469Y-66942147D01* +X170146469Y-66942147D02* +X170146469Y-66704052D01* +X170146469Y-66704052D02* +X170194088Y-66561195D01* +X170194088Y-66561195D02* +X170289326Y-66465957D01* +X170289326Y-66465957D02* +X170384564Y-66418338D01* +X170384564Y-66418338D02* +X170575040Y-66370719D01* +X170575040Y-66370719D02* +X170717897Y-66370719D01* +X170717897Y-66370719D02* +X170908373Y-66418338D01* +X170908373Y-66418338D02* +X171003611Y-66465957D01* +X171003611Y-66465957D02* +X171098850Y-66561195D01* +X171098850Y-66561195D02* +X171146469Y-66704052D01* +X171146469Y-66704052D02* +X171146469Y-66942147D01* +X171146469Y-65942147D02* +X170146469Y-65942147D01* +X170527421Y-65942147D02* +X170479802Y-65846909D01* +X170479802Y-65846909D02* +X170479802Y-65656433D01* +X170479802Y-65656433D02* +X170527421Y-65561195D01* +X170527421Y-65561195D02* +X170575040Y-65513576D01* +X170575040Y-65513576D02* +X170670278Y-65465957D01* +X170670278Y-65465957D02* +X170955992Y-65465957D01* +X170955992Y-65465957D02* +X171051230Y-65513576D01* +X171051230Y-65513576D02* +X171098850Y-65561195D01* +X171098850Y-65561195D02* +X171146469Y-65656433D01* +X171146469Y-65656433D02* +X171146469Y-65846909D01* +X171146469Y-65846909D02* +X171098850Y-65942147D01* +X171146469Y-65037385D02* +X170146469Y-65037385D01* +X170765516Y-64942147D02* +X171146469Y-64656433D01* +X170479802Y-64656433D02* +X170860754Y-65037385D01* +X207096469Y-58811194D02* +X206096469Y-58811194D01* +X206096469Y-58811194D02* +X206096469Y-58430242D01* +X206096469Y-58430242D02* +X206144088Y-58335004D01* +X206144088Y-58335004D02* +X206191707Y-58287385D01* +X206191707Y-58287385D02* +X206286945Y-58239766D01* +X206286945Y-58239766D02* +X206429802Y-58239766D01* +X206429802Y-58239766D02* +X206525040Y-58287385D01* +X206525040Y-58287385D02* +X206572659Y-58335004D01* +X206572659Y-58335004D02* +X206620278Y-58430242D01* +X206620278Y-58430242D02* +X206620278Y-58811194D01* +X206096469Y-57382623D02* +X206096469Y-57573099D01* +X206096469Y-57573099D02* +X206144088Y-57668337D01* +X206144088Y-57668337D02* +X206191707Y-57715956D01* +X206191707Y-57715956D02* +X206334564Y-57811194D01* +X206334564Y-57811194D02* +X206525040Y-57858813D01* +X206525040Y-57858813D02* +X206905992Y-57858813D01* +X206905992Y-57858813D02* +X207001230Y-57811194D01* +X207001230Y-57811194D02* +X207048850Y-57763575D01* +X207048850Y-57763575D02* +X207096469Y-57668337D01* +X207096469Y-57668337D02* +X207096469Y-57477861D01* +X207096469Y-57477861D02* +X207048850Y-57382623D01* +X207048850Y-57382623D02* +X207001230Y-57335004D01* +X207001230Y-57335004D02* +X206905992Y-57287385D01* +X206905992Y-57287385D02* +X206667897Y-57287385D01* +X206667897Y-57287385D02* +X206572659Y-57335004D01* +X206572659Y-57335004D02* +X206525040Y-57382623D01* +X206525040Y-57382623D02* +X206477421Y-57477861D01* +X206477421Y-57477861D02* +X206477421Y-57668337D01* +X206477421Y-57668337D02* +X206525040Y-57763575D01* +X206525040Y-57763575D02* +X206572659Y-57811194D01* +X206572659Y-57811194D02* +X206667897Y-57858813D01* +X177144030Y-58347919D02* +X176810697Y-57871728D01* +X176572602Y-58347919D02* +X176572602Y-57347919D01* +X176572602Y-57347919D02* +X176953554Y-57347919D01* +X176953554Y-57347919D02* +X177048792Y-57395538D01* +X177048792Y-57395538D02* +X177096411Y-57443157D01* +X177096411Y-57443157D02* +X177144030Y-57538395D01* +X177144030Y-57538395D02* +X177144030Y-57681252D01* +X177144030Y-57681252D02* +X177096411Y-57776490D01* +X177096411Y-57776490D02* +X177048792Y-57824109D01* +X177048792Y-57824109D02* +X176953554Y-57871728D01* +X176953554Y-57871728D02* +X176572602Y-57871728D01* +X177953554Y-58300300D02* +X177858316Y-58347919D01* +X177858316Y-58347919D02* +X177667840Y-58347919D01* +X177667840Y-58347919D02* +X177572602Y-58300300D01* +X177572602Y-58300300D02* +X177524983Y-58205061D01* +X177524983Y-58205061D02* +X177524983Y-57824109D01* +X177524983Y-57824109D02* +X177572602Y-57728871D01* +X177572602Y-57728871D02* +X177667840Y-57681252D01* +X177667840Y-57681252D02* +X177858316Y-57681252D01* +X177858316Y-57681252D02* +X177953554Y-57728871D01* +X177953554Y-57728871D02* +X178001173Y-57824109D01* +X178001173Y-57824109D02* +X178001173Y-57919347D01* +X178001173Y-57919347D02* +X177524983Y-58014585D01* +X178429745Y-57681252D02* +X178429745Y-58347919D01* +X178429745Y-57776490D02* +X178477364Y-57728871D01* +X178477364Y-57728871D02* +X178572602Y-57681252D01* +X178572602Y-57681252D02* +X178715459Y-57681252D01* +X178715459Y-57681252D02* +X178810697Y-57728871D01* +X178810697Y-57728871D02* +X178858316Y-57824109D01* +X178858316Y-57824109D02* +X178858316Y-58347919D01* +X179286888Y-57443157D02* +X179334507Y-57395538D01* +X179334507Y-57395538D02* +X179429745Y-57347919D01* +X179429745Y-57347919D02* +X179667840Y-57347919D01* +X179667840Y-57347919D02* +X179763078Y-57395538D01* +X179763078Y-57395538D02* +X179810697Y-57443157D01* +X179810697Y-57443157D02* +X179858316Y-57538395D01* +X179858316Y-57538395D02* +X179858316Y-57633633D01* +X179858316Y-57633633D02* +X179810697Y-57776490D01* +X179810697Y-57776490D02* +X179239269Y-58347919D01* +X179239269Y-58347919D02* +X179858316Y-58347919D01* +X197016055Y-43127919D02* +X197016055Y-42127919D01* +X197016055Y-42127919D02* +X197254150Y-42127919D01* +X197254150Y-42127919D02* +X197397007Y-42175538D01* +X197397007Y-42175538D02* +X197492245Y-42270776D01* +X197492245Y-42270776D02* +X197539864Y-42366014D01* +X197539864Y-42366014D02* +X197587483Y-42556490D01* +X197587483Y-42556490D02* +X197587483Y-42699347D01* +X197587483Y-42699347D02* +X197539864Y-42889823D01* +X197539864Y-42889823D02* +X197492245Y-42985061D01* +X197492245Y-42985061D02* +X197397007Y-43080300D01* +X197397007Y-43080300D02* +X197254150Y-43127919D01* +X197254150Y-43127919D02* +X197016055Y-43127919D01* +X198349388Y-42604109D02* +X198492245Y-42651728D01* +X198492245Y-42651728D02* +X198539864Y-42699347D01* +X198539864Y-42699347D02* +X198587483Y-42794585D01* +X198587483Y-42794585D02* +X198587483Y-42937442D01* +X198587483Y-42937442D02* +X198539864Y-43032680D01* +X198539864Y-43032680D02* +X198492245Y-43080300D01* +X198492245Y-43080300D02* +X198397007Y-43127919D01* +X198397007Y-43127919D02* +X198016055Y-43127919D01* +X198016055Y-43127919D02* +X198016055Y-42127919D01* +X198016055Y-42127919D02* +X198349388Y-42127919D01* +X198349388Y-42127919D02* +X198444626Y-42175538D01* +X198444626Y-42175538D02* +X198492245Y-42223157D01* +X198492245Y-42223157D02* +X198539864Y-42318395D01* +X198539864Y-42318395D02* +X198539864Y-42413633D01* +X198539864Y-42413633D02* +X198492245Y-42508871D01* +X198492245Y-42508871D02* +X198444626Y-42556490D01* +X198444626Y-42556490D02* +X198349388Y-42604109D01* +X198349388Y-42604109D02* +X198016055Y-42604109D01* +X198968436Y-42223157D02* +X199016055Y-42175538D01* +X199016055Y-42175538D02* +X199111293Y-42127919D01* +X199111293Y-42127919D02* +X199349388Y-42127919D01* +X199349388Y-42127919D02* +X199444626Y-42175538D01* +X199444626Y-42175538D02* +X199492245Y-42223157D01* +X199492245Y-42223157D02* +X199539864Y-42318395D01* +X199539864Y-42318395D02* +X199539864Y-42413633D01* +X199539864Y-42413633D02* +X199492245Y-42556490D01* +X199492245Y-42556490D02* +X198920817Y-43127919D01* +X198920817Y-43127919D02* +X199539864Y-43127919D01* +X207096469Y-106561194D02* +X206096469Y-106561194D01* +X206096469Y-106561194D02* +X206096469Y-106180242D01* +X206096469Y-106180242D02* +X206144088Y-106085004D01* +X206144088Y-106085004D02* +X206191707Y-106037385D01* +X206191707Y-106037385D02* +X206286945Y-105989766D01* +X206286945Y-105989766D02* +X206429802Y-105989766D01* +X206429802Y-105989766D02* +X206525040Y-106037385D01* +X206525040Y-106037385D02* +X206572659Y-106085004D01* +X206572659Y-106085004D02* +X206620278Y-106180242D01* +X206620278Y-106180242D02* +X206620278Y-106561194D01* +X206429802Y-105132623D02* +X207096469Y-105132623D01* +X206048850Y-105370718D02* +X206763135Y-105608813D01* +X206763135Y-105608813D02* +X206763135Y-104989766D01* +X207071469Y-80037385D02* +X206071469Y-80037385D01* +X206071469Y-80037385D02* +X206071469Y-79656433D01* +X206071469Y-79656433D02* +X206119088Y-79561195D01* +X206119088Y-79561195D02* +X206166707Y-79513576D01* +X206166707Y-79513576D02* +X206261945Y-79465957D01* +X206261945Y-79465957D02* +X206404802Y-79465957D01* +X206404802Y-79465957D02* +X206500040Y-79513576D01* +X206500040Y-79513576D02* +X206547659Y-79561195D01* +X206547659Y-79561195D02* +X206595278Y-79656433D01* +X206595278Y-79656433D02* +X206595278Y-80037385D01* +X207071469Y-78513576D02* +X207071469Y-79085004D01* +X207071469Y-78799290D02* +X206071469Y-78799290D01* +X206071469Y-78799290D02* +X206214326Y-78894528D01* +X206214326Y-78894528D02* +X206309564Y-78989766D01* +X206309564Y-78989766D02* +X206357183Y-79085004D01* +X206071469Y-77894528D02* +X206071469Y-77799290D01* +X206071469Y-77799290D02* +X206119088Y-77704052D01* +X206119088Y-77704052D02* +X206166707Y-77656433D01* +X206166707Y-77656433D02* +X206261945Y-77608814D01* +X206261945Y-77608814D02* +X206452421Y-77561195D01* +X206452421Y-77561195D02* +X206690516Y-77561195D01* +X206690516Y-77561195D02* +X206880992Y-77608814D01* +X206880992Y-77608814D02* +X206976230Y-77656433D01* +X206976230Y-77656433D02* +X207023850Y-77704052D01* +X207023850Y-77704052D02* +X207071469Y-77799290D01* +X207071469Y-77799290D02* +X207071469Y-77894528D01* +X207071469Y-77894528D02* +X207023850Y-77989766D01* +X207023850Y-77989766D02* +X206976230Y-78037385D01* +X206976230Y-78037385D02* +X206880992Y-78085004D01* +X206880992Y-78085004D02* +X206690516Y-78132623D01* +X206690516Y-78132623D02* +X206452421Y-78132623D01* +X206452421Y-78132623D02* +X206261945Y-78085004D01* +X206261945Y-78085004D02* +X206166707Y-78037385D01* +X206166707Y-78037385D02* +X206119088Y-77989766D01* +X206119088Y-77989766D02* +X206071469Y-77894528D01* +X177631230Y-55163576D02* +X177678850Y-55211195D01* +X177678850Y-55211195D02* +X177726469Y-55354052D01* +X177726469Y-55354052D02* +X177726469Y-55449290D01* +X177726469Y-55449290D02* +X177678850Y-55592147D01* +X177678850Y-55592147D02* +X177583611Y-55687385D01* +X177583611Y-55687385D02* +X177488373Y-55735004D01* +X177488373Y-55735004D02* +X177297897Y-55782623D01* +X177297897Y-55782623D02* +X177155040Y-55782623D01* +X177155040Y-55782623D02* +X176964564Y-55735004D01* +X176964564Y-55735004D02* +X176869326Y-55687385D01* +X176869326Y-55687385D02* +X176774088Y-55592147D01* +X176774088Y-55592147D02* +X176726469Y-55449290D01* +X176726469Y-55449290D02* +X176726469Y-55354052D01* +X176726469Y-55354052D02* +X176774088Y-55211195D01* +X176774088Y-55211195D02* +X176821707Y-55163576D01* +X177678850Y-54306433D02* +X177726469Y-54401671D01* +X177726469Y-54401671D02* +X177726469Y-54592147D01* +X177726469Y-54592147D02* +X177678850Y-54687385D01* +X177678850Y-54687385D02* +X177631230Y-54735004D01* +X177631230Y-54735004D02* +X177535992Y-54782623D01* +X177535992Y-54782623D02* +X177250278Y-54782623D01* +X177250278Y-54782623D02* +X177155040Y-54735004D01* +X177155040Y-54735004D02* +X177107421Y-54687385D01* +X177107421Y-54687385D02* +X177059802Y-54592147D01* +X177059802Y-54592147D02* +X177059802Y-54401671D01* +X177059802Y-54401671D02* +X177107421Y-54306433D01* +X177726469Y-53735004D02* +X177678850Y-53830242D01* +X177678850Y-53830242D02* +X177631230Y-53877861D01* +X177631230Y-53877861D02* +X177535992Y-53925480D01* +X177535992Y-53925480D02* +X177250278Y-53925480D01* +X177250278Y-53925480D02* +X177155040Y-53877861D01* +X177155040Y-53877861D02* +X177107421Y-53830242D01* +X177107421Y-53830242D02* +X177059802Y-53735004D01* +X177059802Y-53735004D02* +X177059802Y-53592147D01* +X177059802Y-53592147D02* +X177107421Y-53496909D01* +X177107421Y-53496909D02* +X177155040Y-53449290D01* +X177155040Y-53449290D02* +X177250278Y-53401671D01* +X177250278Y-53401671D02* +X177535992Y-53401671D01* +X177535992Y-53401671D02* +X177631230Y-53449290D01* +X177631230Y-53449290D02* +X177678850Y-53496909D01* +X177678850Y-53496909D02* +X177726469Y-53592147D01* +X177726469Y-53592147D02* +X177726469Y-53735004D01* +X177726469Y-52973099D02* +X177059802Y-52973099D01* +X177155040Y-52973099D02* +X177107421Y-52925480D01* +X177107421Y-52925480D02* +X177059802Y-52830242D01* +X177059802Y-52830242D02* +X177059802Y-52687385D01* +X177059802Y-52687385D02* +X177107421Y-52592147D01* +X177107421Y-52592147D02* +X177202659Y-52544528D01* +X177202659Y-52544528D02* +X177726469Y-52544528D01* +X177202659Y-52544528D02* +X177107421Y-52496909D01* +X177107421Y-52496909D02* +X177059802Y-52401671D01* +X177059802Y-52401671D02* +X177059802Y-52258814D01* +X177059802Y-52258814D02* +X177107421Y-52163575D01* +X177107421Y-52163575D02* +X177202659Y-52115956D01* +X177202659Y-52115956D02* +X177726469Y-52115956D01* +X177059802Y-51639766D02* +X178059802Y-51639766D01* +X177107421Y-51639766D02* +X177059802Y-51544528D01* +X177059802Y-51544528D02* +X177059802Y-51354052D01* +X177059802Y-51354052D02* +X177107421Y-51258814D01* +X177107421Y-51258814D02* +X177155040Y-51211195D01* +X177155040Y-51211195D02* +X177250278Y-51163576D01* +X177250278Y-51163576D02* +X177535992Y-51163576D01* +X177535992Y-51163576D02* +X177631230Y-51211195D01* +X177631230Y-51211195D02* +X177678850Y-51258814D01* +X177678850Y-51258814D02* +X177726469Y-51354052D01* +X177726469Y-51354052D02* +X177726469Y-51544528D01* +X177726469Y-51544528D02* +X177678850Y-51639766D01* +X196859745Y-115427919D02* +X196859745Y-116237442D01* +X196859745Y-116237442D02* +X196907364Y-116332680D01* +X196907364Y-116332680D02* +X196954983Y-116380300D01* +X196954983Y-116380300D02* +X197050221Y-116427919D01* +X197050221Y-116427919D02* +X197240697Y-116427919D01* +X197240697Y-116427919D02* +X197335935Y-116380300D01* +X197335935Y-116380300D02* +X197383554Y-116332680D01* +X197383554Y-116332680D02* +X197431173Y-116237442D01* +X197431173Y-116237442D02* +X197431173Y-115427919D01* +X197812126Y-115427919D02* +X198478792Y-115427919D01* +X198478792Y-115427919D02* +X198050221Y-116427919D01* +X193016055Y-43127919D02* +X193016055Y-42127919D01* +X193016055Y-42127919D02* +X193254150Y-42127919D01* +X193254150Y-42127919D02* +X193397007Y-42175538D01* +X193397007Y-42175538D02* +X193492245Y-42270776D01* +X193492245Y-42270776D02* +X193539864Y-42366014D01* +X193539864Y-42366014D02* +X193587483Y-42556490D01* +X193587483Y-42556490D02* +X193587483Y-42699347D01* +X193587483Y-42699347D02* +X193539864Y-42889823D01* +X193539864Y-42889823D02* +X193492245Y-42985061D01* +X193492245Y-42985061D02* +X193397007Y-43080300D01* +X193397007Y-43080300D02* +X193254150Y-43127919D01* +X193254150Y-43127919D02* +X193016055Y-43127919D01* +X194349388Y-42604109D02* +X194492245Y-42651728D01* +X194492245Y-42651728D02* +X194539864Y-42699347D01* +X194539864Y-42699347D02* +X194587483Y-42794585D01* +X194587483Y-42794585D02* +X194587483Y-42937442D01* +X194587483Y-42937442D02* +X194539864Y-43032680D01* +X194539864Y-43032680D02* +X194492245Y-43080300D01* +X194492245Y-43080300D02* +X194397007Y-43127919D01* +X194397007Y-43127919D02* +X194016055Y-43127919D01* +X194016055Y-43127919D02* +X194016055Y-42127919D01* +X194016055Y-42127919D02* +X194349388Y-42127919D01* +X194349388Y-42127919D02* +X194444626Y-42175538D01* +X194444626Y-42175538D02* +X194492245Y-42223157D01* +X194492245Y-42223157D02* +X194539864Y-42318395D01* +X194539864Y-42318395D02* +X194539864Y-42413633D01* +X194539864Y-42413633D02* +X194492245Y-42508871D01* +X194492245Y-42508871D02* +X194444626Y-42556490D01* +X194444626Y-42556490D02* +X194349388Y-42604109D01* +X194349388Y-42604109D02* +X194016055Y-42604109D01* +X195539864Y-43127919D02* +X194968436Y-43127919D01* +X195254150Y-43127919D02* +X195254150Y-42127919D01* +X195254150Y-42127919D02* +X195158912Y-42270776D01* +X195158912Y-42270776D02* +X195063674Y-42366014D01* +X195063674Y-42366014D02* +X194968436Y-42413633D01* +X103876469Y-56656433D02* +X104590754Y-56656433D01* +X104590754Y-56656433D02* +X104733611Y-56704052D01* +X104733611Y-56704052D02* +X104828850Y-56799290D01* +X104828850Y-56799290D02* +X104876469Y-56942147D01* +X104876469Y-56942147D02* +X104876469Y-57037385D01* +X104876469Y-55656433D02* +X104876469Y-56227861D01* +X104876469Y-55942147D02* +X103876469Y-55942147D01* +X103876469Y-55942147D02* +X104019326Y-56037385D01* +X104019326Y-56037385D02* +X104114564Y-56132623D01* +X104114564Y-56132623D02* +X104162183Y-56227861D01* +X185799983Y-113752680D02* +X185752364Y-113800300D01* +X185752364Y-113800300D02* +X185609507Y-113847919D01* +X185609507Y-113847919D02* +X185514269Y-113847919D01* +X185514269Y-113847919D02* +X185371412Y-113800300D01* +X185371412Y-113800300D02* +X185276174Y-113705061D01* +X185276174Y-113705061D02* +X185228555Y-113609823D01* +X185228555Y-113609823D02* +X185180936Y-113419347D01* +X185180936Y-113419347D02* +X185180936Y-113276490D01* +X185180936Y-113276490D02* +X185228555Y-113086014D01* +X185228555Y-113086014D02* +X185276174Y-112990776D01* +X185276174Y-112990776D02* +X185371412Y-112895538D01* +X185371412Y-112895538D02* +X185514269Y-112847919D01* +X185514269Y-112847919D02* +X185609507Y-112847919D01* +X185609507Y-112847919D02* +X185752364Y-112895538D01* +X185752364Y-112895538D02* +X185799983Y-112943157D01* +X186657126Y-113800300D02* +X186561888Y-113847919D01* +X186561888Y-113847919D02* +X186371412Y-113847919D01* +X186371412Y-113847919D02* +X186276174Y-113800300D01* +X186276174Y-113800300D02* +X186228555Y-113752680D01* +X186228555Y-113752680D02* +X186180936Y-113657442D01* +X186180936Y-113657442D02* +X186180936Y-113371728D01* +X186180936Y-113371728D02* +X186228555Y-113276490D01* +X186228555Y-113276490D02* +X186276174Y-113228871D01* +X186276174Y-113228871D02* +X186371412Y-113181252D01* +X186371412Y-113181252D02* +X186561888Y-113181252D01* +X186561888Y-113181252D02* +X186657126Y-113228871D01* +X187228555Y-113847919D02* +X187133317Y-113800300D01* +X187133317Y-113800300D02* +X187085698Y-113752680D01* +X187085698Y-113752680D02* +X187038079Y-113657442D01* +X187038079Y-113657442D02* +X187038079Y-113371728D01* +X187038079Y-113371728D02* +X187085698Y-113276490D01* +X187085698Y-113276490D02* +X187133317Y-113228871D01* +X187133317Y-113228871D02* +X187228555Y-113181252D01* +X187228555Y-113181252D02* +X187371412Y-113181252D01* +X187371412Y-113181252D02* +X187466650Y-113228871D01* +X187466650Y-113228871D02* +X187514269Y-113276490D01* +X187514269Y-113276490D02* +X187561888Y-113371728D01* +X187561888Y-113371728D02* +X187561888Y-113657442D01* +X187561888Y-113657442D02* +X187514269Y-113752680D01* +X187514269Y-113752680D02* +X187466650Y-113800300D01* +X187466650Y-113800300D02* +X187371412Y-113847919D01* +X187371412Y-113847919D02* +X187228555Y-113847919D01* +X187990460Y-113847919D02* +X187990460Y-113181252D01* +X187990460Y-113276490D02* +X188038079Y-113228871D01* +X188038079Y-113228871D02* +X188133317Y-113181252D01* +X188133317Y-113181252D02* +X188276174Y-113181252D01* +X188276174Y-113181252D02* +X188371412Y-113228871D01* +X188371412Y-113228871D02* +X188419031Y-113324109D01* +X188419031Y-113324109D02* +X188419031Y-113847919D01* +X188419031Y-113324109D02* +X188466650Y-113228871D01* +X188466650Y-113228871D02* +X188561888Y-113181252D01* +X188561888Y-113181252D02* +X188704745Y-113181252D01* +X188704745Y-113181252D02* +X188799984Y-113228871D01* +X188799984Y-113228871D02* +X188847603Y-113324109D01* +X188847603Y-113324109D02* +X188847603Y-113847919D01* +X189323793Y-113181252D02* +X189323793Y-114181252D01* +X189323793Y-113228871D02* +X189419031Y-113181252D01* +X189419031Y-113181252D02* +X189609507Y-113181252D01* +X189609507Y-113181252D02* +X189704745Y-113228871D01* +X189704745Y-113228871D02* +X189752364Y-113276490D01* +X189752364Y-113276490D02* +X189799983Y-113371728D01* +X189799983Y-113371728D02* +X189799983Y-113657442D01* +X189799983Y-113657442D02* +X189752364Y-113752680D01* +X189752364Y-113752680D02* +X189704745Y-113800300D01* +X189704745Y-113800300D02* +X189609507Y-113847919D01* +X189609507Y-113847919D02* +X189419031Y-113847919D01* +X189419031Y-113847919D02* +X189323793Y-113800300D01* +X190180936Y-112943157D02* +X190228555Y-112895538D01* +X190228555Y-112895538D02* +X190323793Y-112847919D01* +X190323793Y-112847919D02* +X190561888Y-112847919D01* +X190561888Y-112847919D02* +X190657126Y-112895538D01* +X190657126Y-112895538D02* +X190704745Y-112943157D01* +X190704745Y-112943157D02* +X190752364Y-113038395D01* +X190752364Y-113038395D02* +X190752364Y-113133633D01* +X190752364Y-113133633D02* +X190704745Y-113276490D01* +X190704745Y-113276490D02* +X190133317Y-113847919D01* +X190133317Y-113847919D02* +X190752364Y-113847919D01* +X92074983Y-111347919D02* +X91741650Y-110871728D01* +X91503555Y-111347919D02* +X91503555Y-110347919D01* +X91503555Y-110347919D02* +X91884507Y-110347919D01* +X91884507Y-110347919D02* +X91979745Y-110395538D01* +X91979745Y-110395538D02* +X92027364Y-110443157D01* +X92027364Y-110443157D02* +X92074983Y-110538395D01* +X92074983Y-110538395D02* +X92074983Y-110681252D01* +X92074983Y-110681252D02* +X92027364Y-110776490D01* +X92027364Y-110776490D02* +X91979745Y-110824109D01* +X91979745Y-110824109D02* +X91884507Y-110871728D01* +X91884507Y-110871728D02* +X91503555Y-110871728D01* +X92979745Y-110347919D02* +X92503555Y-110347919D01* +X92503555Y-110347919D02* +X92455936Y-110824109D01* +X92455936Y-110824109D02* +X92503555Y-110776490D01* +X92503555Y-110776490D02* +X92598793Y-110728871D01* +X92598793Y-110728871D02* +X92836888Y-110728871D01* +X92836888Y-110728871D02* +X92932126Y-110776490D01* +X92932126Y-110776490D02* +X92979745Y-110824109D01* +X92979745Y-110824109D02* +X93027364Y-110919347D01* +X93027364Y-110919347D02* +X93027364Y-111157442D01* +X93027364Y-111157442D02* +X92979745Y-111252680D01* +X92979745Y-111252680D02* +X92932126Y-111300300D01* +X92932126Y-111300300D02* +X92836888Y-111347919D01* +X92836888Y-111347919D02* +X92598793Y-111347919D01* +X92598793Y-111347919D02* +X92503555Y-111300300D01* +X92503555Y-111300300D02* +X92455936Y-111252680D01* +X135827364Y-43227919D02* +X135827364Y-42227919D01* +X135827364Y-42227919D02* +X136208316Y-42227919D01* +X136208316Y-42227919D02* +X136303554Y-42275538D01* +X136303554Y-42275538D02* +X136351173Y-42323157D01* +X136351173Y-42323157D02* +X136398792Y-42418395D01* +X136398792Y-42418395D02* +X136398792Y-42561252D01* +X136398792Y-42561252D02* +X136351173Y-42656490D01* +X136351173Y-42656490D02* +X136303554Y-42704109D01* +X136303554Y-42704109D02* +X136208316Y-42751728D01* +X136208316Y-42751728D02* +X135827364Y-42751728D01* +X137351173Y-43227919D02* +X136779745Y-43227919D01* +X137065459Y-43227919D02* +X137065459Y-42227919D01* +X137065459Y-42227919D02* +X136970221Y-42370776D01* +X136970221Y-42370776D02* +X136874983Y-42466014D01* +X136874983Y-42466014D02* +X136779745Y-42513633D01* +X138303554Y-43227919D02* +X137732126Y-43227919D01* +X138017840Y-43227919D02* +X138017840Y-42227919D01* +X138017840Y-42227919D02* +X137922602Y-42370776D01* +X137922602Y-42370776D02* +X137827364Y-42466014D01* +X137827364Y-42466014D02* +X137732126Y-42513633D01* +X138654761Y-63900057D02* +X138559523Y-63852438D01* +X138559523Y-63852438D02* +X138464285Y-63757200D01* +X138464285Y-63757200D02* +X138321428Y-63614342D01* +X138321428Y-63614342D02* +X138226190Y-63566723D01* +X138226190Y-63566723D02* +X138130952Y-63566723D01* +X138178571Y-63804819D02* +X138083333Y-63757200D01* +X138083333Y-63757200D02* +X137988095Y-63661961D01* +X137988095Y-63661961D02* +X137940476Y-63471485D01* +X137940476Y-63471485D02* +X137940476Y-63138152D01* +X137940476Y-63138152D02* +X137988095Y-62947676D01* +X137988095Y-62947676D02* +X138083333Y-62852438D01* +X138083333Y-62852438D02* +X138178571Y-62804819D01* +X138178571Y-62804819D02* +X138369047Y-62804819D01* +X138369047Y-62804819D02* +X138464285Y-62852438D01* +X138464285Y-62852438D02* +X138559523Y-62947676D01* +X138559523Y-62947676D02* +X138607142Y-63138152D01* +X138607142Y-63138152D02* +X138607142Y-63471485D01* +X138607142Y-63471485D02* +X138559523Y-63661961D01* +X138559523Y-63661961D02* +X138464285Y-63757200D01* +X138464285Y-63757200D02* +X138369047Y-63804819D01* +X138369047Y-63804819D02* +X138178571Y-63804819D01* +X139559523Y-63804819D02* +X138988095Y-63804819D01* +X139273809Y-63804819D02* +X139273809Y-62804819D01* +X139273809Y-62804819D02* +X139178571Y-62947676D01* +X139178571Y-62947676D02* +X139083333Y-63042914D01* +X139083333Y-63042914D02* +X138988095Y-63090533D01* +X92154819Y-94442857D02* +X91678628Y-94776190D01* +X92154819Y-95014285D02* +X91154819Y-95014285D01* +X91154819Y-95014285D02* +X91154819Y-94633333D01* +X91154819Y-94633333D02* +X91202438Y-94538095D01* +X91202438Y-94538095D02* +X91250057Y-94490476D01* +X91250057Y-94490476D02* +X91345295Y-94442857D01* +X91345295Y-94442857D02* +X91488152Y-94442857D01* +X91488152Y-94442857D02* +X91583390Y-94490476D01* +X91583390Y-94490476D02* +X91631009Y-94538095D01* +X91631009Y-94538095D02* +X91678628Y-94633333D01* +X91678628Y-94633333D02* +X91678628Y-95014285D01* +X91488152Y-93585714D02* +X92297676Y-93585714D01* +X92297676Y-93585714D02* +X92392914Y-93633333D01* +X92392914Y-93633333D02* +X92440533Y-93680952D01* +X92440533Y-93680952D02* +X92488152Y-93776190D01* +X92488152Y-93776190D02* +X92488152Y-93919047D01* +X92488152Y-93919047D02* +X92440533Y-94014285D01* +X92107200Y-93585714D02* +X92154819Y-93680952D01* +X92154819Y-93680952D02* +X92154819Y-93871428D01* +X92154819Y-93871428D02* +X92107200Y-93966666D01* +X92107200Y-93966666D02* +X92059580Y-94014285D01* +X92059580Y-94014285D02* +X91964342Y-94061904D01* +X91964342Y-94061904D02* +X91678628Y-94061904D01* +X91678628Y-94061904D02* +X91583390Y-94014285D01* +X91583390Y-94014285D02* +X91535771Y-93966666D01* +X91535771Y-93966666D02* +X91488152Y-93871428D01* +X91488152Y-93871428D02* +X91488152Y-93680952D01* +X91488152Y-93680952D02* +X91535771Y-93585714D01* +X112621411Y-84378157D02* +X112526173Y-84330538D01* +X112526173Y-84330538D02* +X112430935Y-84235300D01* +X112430935Y-84235300D02* +X112288078Y-84092442D01* +X112288078Y-84092442D02* +X112192840Y-84044823D01* +X112192840Y-84044823D02* +X112097602Y-84044823D01* +X112145221Y-84282919D02* +X112049983Y-84235300D01* +X112049983Y-84235300D02* +X111954745Y-84140061D01* +X111954745Y-84140061D02* +X111907126Y-83949585D01* +X111907126Y-83949585D02* +X111907126Y-83616252D01* +X111907126Y-83616252D02* +X111954745Y-83425776D01* +X111954745Y-83425776D02* +X112049983Y-83330538D01* +X112049983Y-83330538D02* +X112145221Y-83282919D01* +X112145221Y-83282919D02* +X112335697Y-83282919D01* +X112335697Y-83282919D02* +X112430935Y-83330538D01* +X112430935Y-83330538D02* +X112526173Y-83425776D01* +X112526173Y-83425776D02* +X112573792Y-83616252D01* +X112573792Y-83616252D02* +X112573792Y-83949585D01* +X112573792Y-83949585D02* +X112526173Y-84140061D01* +X112526173Y-84140061D02* +X112430935Y-84235300D01* +X112430935Y-84235300D02* +X112335697Y-84282919D01* +X112335697Y-84282919D02* +X112145221Y-84282919D01* +X112907126Y-83282919D02* +X113573792Y-83282919D01* +X113573792Y-83282919D02* +X113145221Y-84282919D01* +X130348792Y-103002680D02* +X130301173Y-103050300D01* +X130301173Y-103050300D02* +X130158316Y-103097919D01* +X130158316Y-103097919D02* +X130063078Y-103097919D01* +X130063078Y-103097919D02* +X129920221Y-103050300D01* +X129920221Y-103050300D02* +X129824983Y-102955061D01* +X129824983Y-102955061D02* +X129777364Y-102859823D01* +X129777364Y-102859823D02* +X129729745Y-102669347D01* +X129729745Y-102669347D02* +X129729745Y-102526490D01* +X129729745Y-102526490D02* +X129777364Y-102336014D01* +X129777364Y-102336014D02* +X129824983Y-102240776D01* +X129824983Y-102240776D02* +X129920221Y-102145538D01* +X129920221Y-102145538D02* +X130063078Y-102097919D01* +X130063078Y-102097919D02* +X130158316Y-102097919D01* +X130158316Y-102097919D02* +X130301173Y-102145538D01* +X130301173Y-102145538D02* +X130348792Y-102193157D01* +X130682126Y-102097919D02* +X131301173Y-102097919D01* +X131301173Y-102097919D02* +X130967840Y-102478871D01* +X130967840Y-102478871D02* +X131110697Y-102478871D01* +X131110697Y-102478871D02* +X131205935Y-102526490D01* +X131205935Y-102526490D02* +X131253554Y-102574109D01* +X131253554Y-102574109D02* +X131301173Y-102669347D01* +X131301173Y-102669347D02* +X131301173Y-102907442D01* +X131301173Y-102907442D02* +X131253554Y-103002680D01* +X131253554Y-103002680D02* +X131205935Y-103050300D01* +X131205935Y-103050300D02* +X131110697Y-103097919D01* +X131110697Y-103097919D02* +X130824983Y-103097919D01* +X130824983Y-103097919D02* +X130729745Y-103050300D01* +X130729745Y-103050300D02* +X130682126Y-103002680D01* +X132158316Y-102431252D02* +X132158316Y-103097919D01* +X131920221Y-102050300D02* +X131682126Y-102764585D01* +X131682126Y-102764585D02* +X132301173Y-102764585D01* +X128273792Y-111347919D02* +X127940459Y-110871728D01* +X127702364Y-111347919D02* +X127702364Y-110347919D01* +X127702364Y-110347919D02* +X128083316Y-110347919D01* +X128083316Y-110347919D02* +X128178554Y-110395538D01* +X128178554Y-110395538D02* +X128226173Y-110443157D01* +X128226173Y-110443157D02* +X128273792Y-110538395D01* +X128273792Y-110538395D02* +X128273792Y-110681252D01* +X128273792Y-110681252D02* +X128226173Y-110776490D01* +X128226173Y-110776490D02* +X128178554Y-110824109D01* +X128178554Y-110824109D02* +X128083316Y-110871728D01* +X128083316Y-110871728D02* +X127702364Y-110871728D01* +X128607126Y-110347919D02* +X129226173Y-110347919D01* +X129226173Y-110347919D02* +X128892840Y-110728871D01* +X128892840Y-110728871D02* +X129035697Y-110728871D01* +X129035697Y-110728871D02* +X129130935Y-110776490D01* +X129130935Y-110776490D02* +X129178554Y-110824109D01* +X129178554Y-110824109D02* +X129226173Y-110919347D01* +X129226173Y-110919347D02* +X129226173Y-111157442D01* +X129226173Y-111157442D02* +X129178554Y-111252680D01* +X129178554Y-111252680D02* +X129130935Y-111300300D01* +X129130935Y-111300300D02* +X129035697Y-111347919D01* +X129035697Y-111347919D02* +X128749983Y-111347919D01* +X128749983Y-111347919D02* +X128654745Y-111300300D01* +X128654745Y-111300300D02* +X128607126Y-111252680D01* +X130178554Y-111347919D02* +X129607126Y-111347919D01* +X129892840Y-111347919D02* +X129892840Y-110347919D01* +X129892840Y-110347919D02* +X129797602Y-110490776D01* +X129797602Y-110490776D02* +X129702364Y-110586014D01* +X129702364Y-110586014D02* +X129607126Y-110633633D01* +X177873792Y-110847919D02* +X177540459Y-110371728D01* +X177302364Y-110847919D02* +X177302364Y-109847919D01* +X177302364Y-109847919D02* +X177683316Y-109847919D01* +X177683316Y-109847919D02* +X177778554Y-109895538D01* +X177778554Y-109895538D02* +X177826173Y-109943157D01* +X177826173Y-109943157D02* +X177873792Y-110038395D01* +X177873792Y-110038395D02* +X177873792Y-110181252D01* +X177873792Y-110181252D02* +X177826173Y-110276490D01* +X177826173Y-110276490D02* +X177778554Y-110324109D01* +X177778554Y-110324109D02* +X177683316Y-110371728D01* +X177683316Y-110371728D02* +X177302364Y-110371728D01* +X178159507Y-110181252D02* +X178540459Y-110181252D01* +X178302364Y-110847919D02* +X178302364Y-109990776D01* +X178302364Y-109990776D02* +X178349983Y-109895538D01* +X178349983Y-109895538D02* +X178445221Y-109847919D01* +X178445221Y-109847919D02* +X178540459Y-109847919D01* +X178873793Y-110847919D02* +X178873793Y-110181252D01* +X178873793Y-110371728D02* +X178921412Y-110276490D01* +X178921412Y-110276490D02* +X178969031Y-110228871D01* +X178969031Y-110228871D02* +X179064269Y-110181252D01* +X179064269Y-110181252D02* +X179159507Y-110181252D01* +X179873793Y-110800300D02* +X179778555Y-110847919D01* +X179778555Y-110847919D02* +X179588079Y-110847919D01* +X179588079Y-110847919D02* +X179492841Y-110800300D01* +X179492841Y-110800300D02* +X179445222Y-110705061D01* +X179445222Y-110705061D02* +X179445222Y-110324109D01* +X179445222Y-110324109D02* +X179492841Y-110228871D01* +X179492841Y-110228871D02* +X179588079Y-110181252D01* +X179588079Y-110181252D02* +X179778555Y-110181252D01* +X179778555Y-110181252D02* +X179873793Y-110228871D01* +X179873793Y-110228871D02* +X179921412Y-110324109D01* +X179921412Y-110324109D02* +X179921412Y-110419347D01* +X179921412Y-110419347D02* +X179445222Y-110514585D01* +X180778555Y-110181252D02* +X180778555Y-111181252D01* +X180778555Y-110800300D02* +X180683317Y-110847919D01* +X180683317Y-110847919D02* +X180492841Y-110847919D01* +X180492841Y-110847919D02* +X180397603Y-110800300D01* +X180397603Y-110800300D02* +X180349984Y-110752680D01* +X180349984Y-110752680D02* +X180302365Y-110657442D01* +X180302365Y-110657442D02* +X180302365Y-110371728D01* +X180302365Y-110371728D02* +X180349984Y-110276490D01* +X180349984Y-110276490D02* +X180397603Y-110228871D01* +X180397603Y-110228871D02* +X180492841Y-110181252D01* +X180492841Y-110181252D02* +X180683317Y-110181252D01* +X180683317Y-110181252D02* +X180778555Y-110228871D01* +X181207127Y-109943157D02* +X181254746Y-109895538D01* +X181254746Y-109895538D02* +X181349984Y-109847919D01* +X181349984Y-109847919D02* +X181588079Y-109847919D01* +X181588079Y-109847919D02* +X181683317Y-109895538D01* +X181683317Y-109895538D02* +X181730936Y-109943157D01* +X181730936Y-109943157D02* +X181778555Y-110038395D01* +X181778555Y-110038395D02* +X181778555Y-110133633D01* +X181778555Y-110133633D02* +X181730936Y-110276490D01* +X181730936Y-110276490D02* +X181159508Y-110847919D01* +X181159508Y-110847919D02* +X181778555Y-110847919D01* +X201549999Y-83474819D02* +X201216666Y-82998628D01* +X200978571Y-83474819D02* +X200978571Y-82474819D01* +X200978571Y-82474819D02* +X201359523Y-82474819D01* +X201359523Y-82474819D02* +X201454761Y-82522438D01* +X201454761Y-82522438D02* +X201502380Y-82570057D01* +X201502380Y-82570057D02* +X201549999Y-82665295D01* +X201549999Y-82665295D02* +X201549999Y-82808152D01* +X201549999Y-82808152D02* +X201502380Y-82903390D01* +X201502380Y-82903390D02* +X201454761Y-82951009D01* +X201454761Y-82951009D02* +X201359523Y-82998628D01* +X201359523Y-82998628D02* +X200978571Y-82998628D01* +X201978571Y-83474819D02* +X201978571Y-82808152D01* +X201978571Y-82903390D02* +X202026190Y-82855771D01* +X202026190Y-82855771D02* +X202121428Y-82808152D01* +X202121428Y-82808152D02* +X202264285Y-82808152D01* +X202264285Y-82808152D02* +X202359523Y-82855771D01* +X202359523Y-82855771D02* +X202407142Y-82951009D01* +X202407142Y-82951009D02* +X202407142Y-83474819D01* +X202407142Y-82951009D02* +X202454761Y-82855771D01* +X202454761Y-82855771D02* +X202549999Y-82808152D01* +X202549999Y-82808152D02* +X202692856Y-82808152D01* +X202692856Y-82808152D02* +X202788095Y-82855771D01* +X202788095Y-82855771D02* +X202835714Y-82951009D01* +X202835714Y-82951009D02* +X202835714Y-83474819D01* +X203454761Y-83474819D02* +X203359523Y-83427200D01* +X203359523Y-83427200D02* +X203311904Y-83331961D01* +X203311904Y-83331961D02* +X203311904Y-82474819D01* +X204216666Y-83427200D02* +X204121428Y-83474819D01* +X204121428Y-83474819D02* +X203930952Y-83474819D01* +X203930952Y-83474819D02* +X203835714Y-83427200D01* +X203835714Y-83427200D02* +X203788095Y-83331961D01* +X203788095Y-83331961D02* +X203788095Y-82951009D01* +X203788095Y-82951009D02* +X203835714Y-82855771D01* +X203835714Y-82855771D02* +X203930952Y-82808152D01* +X203930952Y-82808152D02* +X204121428Y-82808152D01* +X204121428Y-82808152D02* +X204216666Y-82855771D01* +X204216666Y-82855771D02* +X204264285Y-82951009D01* +X204264285Y-82951009D02* +X204264285Y-83046247D01* +X204264285Y-83046247D02* +X203788095Y-83141485D01* +X205121428Y-83474819D02* +X205121428Y-82474819D01* +X205121428Y-83427200D02* +X205026190Y-83474819D01* +X205026190Y-83474819D02* +X204835714Y-83474819D01* +X204835714Y-83474819D02* +X204740476Y-83427200D01* +X204740476Y-83427200D02* +X204692857Y-83379580D01* +X204692857Y-83379580D02* +X204645238Y-83284342D01* +X204645238Y-83284342D02* +X204645238Y-82998628D01* +X204645238Y-82998628D02* +X204692857Y-82903390D01* +X204692857Y-82903390D02* +X204740476Y-82855771D01* +X204740476Y-82855771D02* +X204835714Y-82808152D01* +X204835714Y-82808152D02* +X205026190Y-82808152D01* +X205026190Y-82808152D02* +X205121428Y-82855771D01* +X123438095Y-119604819D02* +X123438095Y-120414342D01* +X123438095Y-120414342D02* +X123485714Y-120509580D01* +X123485714Y-120509580D02* +X123533333Y-120557200D01* +X123533333Y-120557200D02* +X123628571Y-120604819D01* +X123628571Y-120604819D02* +X123819047Y-120604819D01* +X123819047Y-120604819D02* +X123914285Y-120557200D01* +X123914285Y-120557200D02* +X123961904Y-120509580D01* +X123961904Y-120509580D02* +X124009523Y-120414342D01* +X124009523Y-120414342D02* +X124009523Y-119604819D01* +X124390476Y-119604819D02* +X125009523Y-119604819D01* +X125009523Y-119604819D02* +X124676190Y-119985771D01* +X124676190Y-119985771D02* +X124819047Y-119985771D01* +X124819047Y-119985771D02* +X124914285Y-120033390D01* +X124914285Y-120033390D02* +X124961904Y-120081009D01* +X124961904Y-120081009D02* +X125009523Y-120176247D01* +X125009523Y-120176247D02* +X125009523Y-120414342D01* +X125009523Y-120414342D02* +X124961904Y-120509580D01* +X124961904Y-120509580D02* +X124914285Y-120557200D01* +X124914285Y-120557200D02* +X124819047Y-120604819D01* +X124819047Y-120604819D02* +X124533333Y-120604819D01* +X124533333Y-120604819D02* +X124438095Y-120557200D01* +X124438095Y-120557200D02* +X124390476Y-120509580D01* +X181731230Y-96965957D02* +X181778850Y-97013576D01* +X181778850Y-97013576D02* +X181826469Y-97156433D01* +X181826469Y-97156433D02* +X181826469Y-97251671D01* +X181826469Y-97251671D02* +X181778850Y-97394528D01* +X181778850Y-97394528D02* +X181683611Y-97489766D01* +X181683611Y-97489766D02* +X181588373Y-97537385D01* +X181588373Y-97537385D02* +X181397897Y-97585004D01* +X181397897Y-97585004D02* +X181255040Y-97585004D01* +X181255040Y-97585004D02* +X181064564Y-97537385D01* +X181064564Y-97537385D02* +X180969326Y-97489766D01* +X180969326Y-97489766D02* +X180874088Y-97394528D01* +X180874088Y-97394528D02* +X180826469Y-97251671D01* +X180826469Y-97251671D02* +X180826469Y-97156433D01* +X180826469Y-97156433D02* +X180874088Y-97013576D01* +X180874088Y-97013576D02* +X180921707Y-96965957D01* +X181159802Y-96108814D02* +X181826469Y-96108814D01* +X180778850Y-96346909D02* +X181493135Y-96585004D01* +X181493135Y-96585004D02* +X181493135Y-95965957D01* +X180826469Y-95394528D02* +X180826469Y-95299290D01* +X180826469Y-95299290D02* +X180874088Y-95204052D01* +X180874088Y-95204052D02* +X180921707Y-95156433D01* +X180921707Y-95156433D02* +X181016945Y-95108814D01* +X181016945Y-95108814D02* +X181207421Y-95061195D01* +X181207421Y-95061195D02* +X181445516Y-95061195D01* +X181445516Y-95061195D02* +X181635992Y-95108814D01* +X181635992Y-95108814D02* +X181731230Y-95156433D01* +X181731230Y-95156433D02* +X181778850Y-95204052D01* +X181778850Y-95204052D02* +X181826469Y-95299290D01* +X181826469Y-95299290D02* +X181826469Y-95394528D01* +X181826469Y-95394528D02* +X181778850Y-95489766D01* +X181778850Y-95489766D02* +X181731230Y-95537385D01* +X181731230Y-95537385D02* +X181635992Y-95585004D01* +X181635992Y-95585004D02* +X181445516Y-95632623D01* +X181445516Y-95632623D02* +X181207421Y-95632623D01* +X181207421Y-95632623D02* +X181016945Y-95585004D01* +X181016945Y-95585004D02* +X180921707Y-95537385D01* +X180921707Y-95537385D02* +X180874088Y-95489766D01* +X180874088Y-95489766D02* +X180826469Y-95394528D01* +X173858316Y-71777919D02* +X173858316Y-72492204D01* +X173858316Y-72492204D02* +X173810697Y-72635061D01* +X173810697Y-72635061D02* +X173715459Y-72730300D01* +X173715459Y-72730300D02* +X173572602Y-72777919D01* +X173572602Y-72777919D02* +X173477364Y-72777919D01* +X174239269Y-71777919D02* +X174905935Y-71777919D01* +X174905935Y-71777919D02* +X174477364Y-72777919D01* +X88811905Y-98654819D02* +X88811905Y-97654819D01* +X88811905Y-97654819D02* +X89050000Y-97654819D01* +X89050000Y-97654819D02* +X89192857Y-97702438D01* +X89192857Y-97702438D02* +X89288095Y-97797676D01* +X89288095Y-97797676D02* +X89335714Y-97892914D01* +X89335714Y-97892914D02* +X89383333Y-98083390D01* +X89383333Y-98083390D02* +X89383333Y-98226247D01* +X89383333Y-98226247D02* +X89335714Y-98416723D01* +X89335714Y-98416723D02* +X89288095Y-98511961D01* +X89288095Y-98511961D02* +X89192857Y-98607200D01* +X89192857Y-98607200D02* +X89050000Y-98654819D01* +X89050000Y-98654819D02* +X88811905Y-98654819D01* +X89764286Y-97750057D02* +X89811905Y-97702438D01* +X89811905Y-97702438D02* +X89907143Y-97654819D01* +X89907143Y-97654819D02* +X90145238Y-97654819D01* +X90145238Y-97654819D02* +X90240476Y-97702438D01* +X90240476Y-97702438D02* +X90288095Y-97750057D01* +X90288095Y-97750057D02* +X90335714Y-97845295D01* +X90335714Y-97845295D02* +X90335714Y-97940533D01* +X90335714Y-97940533D02* +X90288095Y-98083390D01* +X90288095Y-98083390D02* +X89716667Y-98654819D01* +X89716667Y-98654819D02* +X90335714Y-98654819D01* +X99548792Y-86947919D02* +X99215459Y-86471728D01* +X98977364Y-86947919D02* +X98977364Y-85947919D01* +X98977364Y-85947919D02* +X99358316Y-85947919D01* +X99358316Y-85947919D02* +X99453554Y-85995538D01* +X99453554Y-85995538D02* +X99501173Y-86043157D01* +X99501173Y-86043157D02* +X99548792Y-86138395D01* +X99548792Y-86138395D02* +X99548792Y-86281252D01* +X99548792Y-86281252D02* +X99501173Y-86376490D01* +X99501173Y-86376490D02* +X99453554Y-86424109D01* +X99453554Y-86424109D02* +X99358316Y-86471728D01* +X99358316Y-86471728D02* +X98977364Y-86471728D01* +X99929745Y-86900300D02* +X100072602Y-86947919D01* +X100072602Y-86947919D02* +X100310697Y-86947919D01* +X100310697Y-86947919D02* +X100405935Y-86900300D01* +X100405935Y-86900300D02* +X100453554Y-86852680D01* +X100453554Y-86852680D02* +X100501173Y-86757442D01* +X100501173Y-86757442D02* +X100501173Y-86662204D01* +X100501173Y-86662204D02* +X100453554Y-86566966D01* +X100453554Y-86566966D02* +X100405935Y-86519347D01* +X100405935Y-86519347D02* +X100310697Y-86471728D01* +X100310697Y-86471728D02* +X100120221Y-86424109D01* +X100120221Y-86424109D02* +X100024983Y-86376490D01* +X100024983Y-86376490D02* +X99977364Y-86328871D01* +X99977364Y-86328871D02* +X99929745Y-86233633D01* +X99929745Y-86233633D02* +X99929745Y-86138395D01* +X99929745Y-86138395D02* +X99977364Y-86043157D01* +X99977364Y-86043157D02* +X100024983Y-85995538D01* +X100024983Y-85995538D02* +X100120221Y-85947919D01* +X100120221Y-85947919D02* +X100358316Y-85947919D01* +X100358316Y-85947919D02* +X100501173Y-85995538D01* +X101453554Y-86947919D02* +X100882126Y-86947919D01* +X101167840Y-86947919D02* +X101167840Y-85947919D01* +X101167840Y-85947919D02* +X101072602Y-86090776D01* +X101072602Y-86090776D02* +X100977364Y-86186014D01* +X100977364Y-86186014D02* +X100882126Y-86233633D01* +X132297602Y-111252680D02* +X132249983Y-111300300D01* +X132249983Y-111300300D02* +X132107126Y-111347919D01* +X132107126Y-111347919D02* +X132011888Y-111347919D01* +X132011888Y-111347919D02* +X131869031Y-111300300D01* +X131869031Y-111300300D02* +X131773793Y-111205061D01* +X131773793Y-111205061D02* +X131726174Y-111109823D01* +X131726174Y-111109823D02* +X131678555Y-110919347D01* +X131678555Y-110919347D02* +X131678555Y-110776490D01* +X131678555Y-110776490D02* +X131726174Y-110586014D01* +X131726174Y-110586014D02* +X131773793Y-110490776D01* +X131773793Y-110490776D02* +X131869031Y-110395538D01* +X131869031Y-110395538D02* +X132011888Y-110347919D01* +X132011888Y-110347919D02* +X132107126Y-110347919D01* +X132107126Y-110347919D02* +X132249983Y-110395538D01* +X132249983Y-110395538D02* +X132297602Y-110443157D01* +X133154745Y-110681252D02* +X133154745Y-111347919D01* +X132726174Y-110681252D02* +X132726174Y-111205061D01* +X132726174Y-111205061D02* +X132773793Y-111300300D01* +X132773793Y-111300300D02* +X132869031Y-111347919D01* +X132869031Y-111347919D02* +X133011888Y-111347919D01* +X133011888Y-111347919D02* +X133107126Y-111300300D01* +X133107126Y-111300300D02* +X133154745Y-111252680D01* +X133535698Y-110347919D02* +X134154745Y-110347919D01* +X134154745Y-110347919D02* +X133821412Y-110728871D01* +X133821412Y-110728871D02* +X133964269Y-110728871D01* +X133964269Y-110728871D02* +X134059507Y-110776490D01* +X134059507Y-110776490D02* +X134107126Y-110824109D01* +X134107126Y-110824109D02* +X134154745Y-110919347D01* +X134154745Y-110919347D02* +X134154745Y-111157442D01* +X134154745Y-111157442D02* +X134107126Y-111252680D01* +X134107126Y-111252680D02* +X134059507Y-111300300D01* +X134059507Y-111300300D02* +X133964269Y-111347919D01* +X133964269Y-111347919D02* +X133678555Y-111347919D01* +X133678555Y-111347919D02* +X133583317Y-111300300D01* +X133583317Y-111300300D02* +X133535698Y-111252680D01* +X97699983Y-106347919D02* +X97366650Y-105871728D01* +X97128555Y-106347919D02* +X97128555Y-105347919D01* +X97128555Y-105347919D02* +X97509507Y-105347919D01* +X97509507Y-105347919D02* +X97604745Y-105395538D01* +X97604745Y-105395538D02* +X97652364Y-105443157D01* +X97652364Y-105443157D02* +X97699983Y-105538395D01* +X97699983Y-105538395D02* +X97699983Y-105681252D01* +X97699983Y-105681252D02* +X97652364Y-105776490D01* +X97652364Y-105776490D02* +X97604745Y-105824109D01* +X97604745Y-105824109D02* +X97509507Y-105871728D01* +X97509507Y-105871728D02* +X97128555Y-105871728D01* +X98033317Y-105347919D02* +X98652364Y-105347919D01* +X98652364Y-105347919D02* +X98319031Y-105728871D01* +X98319031Y-105728871D02* +X98461888Y-105728871D01* +X98461888Y-105728871D02* +X98557126Y-105776490D01* +X98557126Y-105776490D02* +X98604745Y-105824109D01* +X98604745Y-105824109D02* +X98652364Y-105919347D01* +X98652364Y-105919347D02* +X98652364Y-106157442D01* +X98652364Y-106157442D02* +X98604745Y-106252680D01* +X98604745Y-106252680D02* +X98557126Y-106300300D01* +X98557126Y-106300300D02* +X98461888Y-106347919D01* +X98461888Y-106347919D02* +X98176174Y-106347919D01* +X98176174Y-106347919D02* +X98080936Y-106300300D01* +X98080936Y-106300300D02* +X98033317Y-106252680D01* +X178873792Y-101347919D02* +X178540459Y-100871728D01* +X178302364Y-101347919D02* +X178302364Y-100347919D01* +X178302364Y-100347919D02* +X178683316Y-100347919D01* +X178683316Y-100347919D02* +X178778554Y-100395538D01* +X178778554Y-100395538D02* +X178826173Y-100443157D01* +X178826173Y-100443157D02* +X178873792Y-100538395D01* +X178873792Y-100538395D02* +X178873792Y-100681252D01* +X178873792Y-100681252D02* +X178826173Y-100776490D01* +X178826173Y-100776490D02* +X178778554Y-100824109D01* +X178778554Y-100824109D02* +X178683316Y-100871728D01* +X178683316Y-100871728D02* +X178302364Y-100871728D01* +X179730935Y-100347919D02* +X179540459Y-100347919D01* +X179540459Y-100347919D02* +X179445221Y-100395538D01* +X179445221Y-100395538D02* +X179397602Y-100443157D01* +X179397602Y-100443157D02* +X179302364Y-100586014D01* +X179302364Y-100586014D02* +X179254745Y-100776490D01* +X179254745Y-100776490D02* +X179254745Y-101157442D01* +X179254745Y-101157442D02* +X179302364Y-101252680D01* +X179302364Y-101252680D02* +X179349983Y-101300300D01* +X179349983Y-101300300D02* +X179445221Y-101347919D01* +X179445221Y-101347919D02* +X179635697Y-101347919D01* +X179635697Y-101347919D02* +X179730935Y-101300300D01* +X179730935Y-101300300D02* +X179778554Y-101252680D01* +X179778554Y-101252680D02* +X179826173Y-101157442D01* +X179826173Y-101157442D02* +X179826173Y-100919347D01* +X179826173Y-100919347D02* +X179778554Y-100824109D01* +X179778554Y-100824109D02* +X179730935Y-100776490D01* +X179730935Y-100776490D02* +X179635697Y-100728871D01* +X179635697Y-100728871D02* +X179445221Y-100728871D01* +X179445221Y-100728871D02* +X179349983Y-100776490D01* +X179349983Y-100776490D02* +X179302364Y-100824109D01* +X179302364Y-100824109D02* +X179254745Y-100919347D01* +X180445221Y-100347919D02* +X180540459Y-100347919D01* +X180540459Y-100347919D02* +X180635697Y-100395538D01* +X180635697Y-100395538D02* +X180683316Y-100443157D01* +X180683316Y-100443157D02* +X180730935Y-100538395D01* +X180730935Y-100538395D02* +X180778554Y-100728871D01* +X180778554Y-100728871D02* +X180778554Y-100966966D01* +X180778554Y-100966966D02* +X180730935Y-101157442D01* +X180730935Y-101157442D02* +X180683316Y-101252680D01* +X180683316Y-101252680D02* +X180635697Y-101300300D01* +X180635697Y-101300300D02* +X180540459Y-101347919D01* +X180540459Y-101347919D02* +X180445221Y-101347919D01* +X180445221Y-101347919D02* +X180349983Y-101300300D01* +X180349983Y-101300300D02* +X180302364Y-101252680D01* +X180302364Y-101252680D02* +X180254745Y-101157442D01* +X180254745Y-101157442D02* +X180207126Y-100966966D01* +X180207126Y-100966966D02* +X180207126Y-100728871D01* +X180207126Y-100728871D02* +X180254745Y-100538395D01* +X180254745Y-100538395D02* +X180302364Y-100443157D01* +X180302364Y-100443157D02* +X180349983Y-100395538D01* +X180349983Y-100395538D02* +X180445221Y-100347919D01* +X110035697Y-111347919D02* +X109702364Y-110871728D01* +X109464269Y-111347919D02* +X109464269Y-110347919D01* +X109464269Y-110347919D02* +X109845221Y-110347919D01* +X109845221Y-110347919D02* +X109940459Y-110395538D01* +X109940459Y-110395538D02* +X109988078Y-110443157D01* +X109988078Y-110443157D02* +X110035697Y-110538395D01* +X110035697Y-110538395D02* +X110035697Y-110681252D01* +X110035697Y-110681252D02* +X109988078Y-110776490D01* +X109988078Y-110776490D02* +X109940459Y-110824109D01* +X109940459Y-110824109D02* +X109845221Y-110871728D01* +X109845221Y-110871728D02* +X109464269Y-110871728D01* +X110892840Y-111347919D02* +X110892840Y-110347919D01* +X110892840Y-111300300D02* +X110797602Y-111347919D01* +X110797602Y-111347919D02* +X110607126Y-111347919D01* +X110607126Y-111347919D02* +X110511888Y-111300300D01* +X110511888Y-111300300D02* +X110464269Y-111252680D01* +X110464269Y-111252680D02* +X110416650Y-111157442D01* +X110416650Y-111157442D02* +X110416650Y-110871728D01* +X110416650Y-110871728D02* +X110464269Y-110776490D01* +X110464269Y-110776490D02* +X110511888Y-110728871D01* +X110511888Y-110728871D02* +X110607126Y-110681252D01* +X110607126Y-110681252D02* +X110797602Y-110681252D01* +X110797602Y-110681252D02* +X110892840Y-110728871D01* +X111226174Y-110681252D02* +X111607126Y-110681252D01* +X111369031Y-111347919D02* +X111369031Y-110490776D01* +X111369031Y-110490776D02* +X111416650Y-110395538D01* +X111416650Y-110395538D02* +X111511888Y-110347919D01* +X111511888Y-110347919D02* +X111607126Y-110347919D01* +X112369031Y-110681252D02* +X112369031Y-111347919D01* +X111940460Y-110681252D02* +X111940460Y-111205061D01* +X111940460Y-111205061D02* +X111988079Y-111300300D01* +X111988079Y-111300300D02* +X112083317Y-111347919D01* +X112083317Y-111347919D02* +X112226174Y-111347919D01* +X112226174Y-111347919D02* +X112321412Y-111300300D01* +X112321412Y-111300300D02* +X112369031Y-111252680D01* +D17* +X83506666Y-132179271D02* +X83506666Y-130909271D01* +X83506666Y-130909271D02* +X83930000Y-131816414D01* +X83930000Y-131816414D02* +X84353333Y-130909271D01* +X84353333Y-130909271D02* +X84353333Y-132179271D01* +X84958095Y-132179271D02* +X84958095Y-130909271D01* +X84958095Y-131514033D02* +X85683810Y-131514033D01* +X85683810Y-132179271D02* +X85683810Y-130909271D01* +X86167619Y-130909271D02* +X86953810Y-130909271D01* +X86953810Y-130909271D02* +X86530476Y-131393080D01* +X86530476Y-131393080D02* +X86711905Y-131393080D01* +X86711905Y-131393080D02* +X86832857Y-131453556D01* +X86832857Y-131453556D02* +X86893333Y-131514033D01* +X86893333Y-131514033D02* +X86953810Y-131634985D01* +X86953810Y-131634985D02* +X86953810Y-131937366D01* +X86953810Y-131937366D02* +X86893333Y-132058318D01* +X86893333Y-132058318D02* +X86832857Y-132118795D01* +X86832857Y-132118795D02* +X86711905Y-132179271D01* +X86711905Y-132179271D02* +X86349048Y-132179271D01* +X86349048Y-132179271D02* +X86228095Y-132118795D01* +X86228095Y-132118795D02* +X86167619Y-132058318D01* +D16* +X89977364Y-59277919D02* +X89977364Y-58277919D01* +X89977364Y-58277919D02* +X90215459Y-58277919D01* +X90215459Y-58277919D02* +X90358316Y-58325538D01* +X90358316Y-58325538D02* +X90453554Y-58420776D01* +X90453554Y-58420776D02* +X90501173Y-58516014D01* +X90501173Y-58516014D02* +X90548792Y-58706490D01* +X90548792Y-58706490D02* +X90548792Y-58849347D01* +X90548792Y-58849347D02* +X90501173Y-59039823D01* +X90501173Y-59039823D02* +X90453554Y-59135061D01* +X90453554Y-59135061D02* +X90358316Y-59230300D01* +X90358316Y-59230300D02* +X90215459Y-59277919D01* +X90215459Y-59277919D02* +X89977364Y-59277919D01* +X91501173Y-59277919D02* +X90929745Y-59277919D01* +X91215459Y-59277919D02* +X91215459Y-58277919D01* +X91215459Y-58277919D02* +X91120221Y-58420776D01* +X91120221Y-58420776D02* +X91024983Y-58516014D01* +X91024983Y-58516014D02* +X90929745Y-58563633D01* +X92120221Y-58277919D02* +X92215459Y-58277919D01* +X92215459Y-58277919D02* +X92310697Y-58325538D01* +X92310697Y-58325538D02* +X92358316Y-58373157D01* +X92358316Y-58373157D02* +X92405935Y-58468395D01* +X92405935Y-58468395D02* +X92453554Y-58658871D01* +X92453554Y-58658871D02* +X92453554Y-58896966D01* +X92453554Y-58896966D02* +X92405935Y-59087442D01* +X92405935Y-59087442D02* +X92358316Y-59182680D01* +X92358316Y-59182680D02* +X92310697Y-59230300D01* +X92310697Y-59230300D02* +X92215459Y-59277919D01* +X92215459Y-59277919D02* +X92120221Y-59277919D01* +X92120221Y-59277919D02* +X92024983Y-59230300D01* +X92024983Y-59230300D02* +X91977364Y-59182680D01* +X91977364Y-59182680D02* +X91929745Y-59087442D01* +X91929745Y-59087442D02* +X91882126Y-58896966D01* +X91882126Y-58896966D02* +X91882126Y-58658871D01* +X91882126Y-58658871D02* +X91929745Y-58468395D01* +X91929745Y-58468395D02* +X91977364Y-58373157D01* +X91977364Y-58373157D02* +X92024983Y-58325538D01* +X92024983Y-58325538D02* +X92120221Y-58277919D01* +X177726469Y-50313576D02* +X177250278Y-50646909D01* +X177726469Y-50885004D02* +X176726469Y-50885004D01* +X176726469Y-50885004D02* +X176726469Y-50504052D01* +X176726469Y-50504052D02* +X176774088Y-50408814D01* +X176774088Y-50408814D02* +X176821707Y-50361195D01* +X176821707Y-50361195D02* +X176916945Y-50313576D01* +X176916945Y-50313576D02* +X177059802Y-50313576D01* +X177059802Y-50313576D02* +X177155040Y-50361195D01* +X177155040Y-50361195D02* +X177202659Y-50408814D01* +X177202659Y-50408814D02* +X177250278Y-50504052D01* +X177250278Y-50504052D02* +X177250278Y-50885004D01* +X177678850Y-49456433D02* +X177726469Y-49551671D01* +X177726469Y-49551671D02* +X177726469Y-49742147D01* +X177726469Y-49742147D02* +X177678850Y-49837385D01* +X177678850Y-49837385D02* +X177631230Y-49885004D01* +X177631230Y-49885004D02* +X177535992Y-49932623D01* +X177535992Y-49932623D02* +X177250278Y-49932623D01* +X177250278Y-49932623D02* +X177155040Y-49885004D01* +X177155040Y-49885004D02* +X177107421Y-49837385D01* +X177107421Y-49837385D02* +X177059802Y-49742147D01* +X177059802Y-49742147D02* +X177059802Y-49551671D01* +X177059802Y-49551671D02* +X177107421Y-49456433D01* +X177726469Y-48885004D02* +X177678850Y-48980242D01* +X177678850Y-48980242D02* +X177631230Y-49027861D01* +X177631230Y-49027861D02* +X177535992Y-49075480D01* +X177535992Y-49075480D02* +X177250278Y-49075480D01* +X177250278Y-49075480D02* +X177155040Y-49027861D01* +X177155040Y-49027861D02* +X177107421Y-48980242D01* +X177107421Y-48980242D02* +X177059802Y-48885004D01* +X177059802Y-48885004D02* +X177059802Y-48742147D01* +X177059802Y-48742147D02* +X177107421Y-48646909D01* +X177107421Y-48646909D02* +X177155040Y-48599290D01* +X177155040Y-48599290D02* +X177250278Y-48551671D01* +X177250278Y-48551671D02* +X177535992Y-48551671D01* +X177535992Y-48551671D02* +X177631230Y-48599290D01* +X177631230Y-48599290D02* +X177678850Y-48646909D01* +X177678850Y-48646909D02* +X177726469Y-48742147D01* +X177726469Y-48742147D02* +X177726469Y-48885004D01* +X177726469Y-48123099D02* +X177059802Y-48123099D01* +X177155040Y-48123099D02* +X177107421Y-48075480D01* +X177107421Y-48075480D02* +X177059802Y-47980242D01* +X177059802Y-47980242D02* +X177059802Y-47837385D01* +X177059802Y-47837385D02* +X177107421Y-47742147D01* +X177107421Y-47742147D02* +X177202659Y-47694528D01* +X177202659Y-47694528D02* +X177726469Y-47694528D01* +X177202659Y-47694528D02* +X177107421Y-47646909D01* +X177107421Y-47646909D02* +X177059802Y-47551671D01* +X177059802Y-47551671D02* +X177059802Y-47408814D01* +X177059802Y-47408814D02* +X177107421Y-47313575D01* +X177107421Y-47313575D02* +X177202659Y-47265956D01* +X177202659Y-47265956D02* +X177726469Y-47265956D01* +X177059802Y-46789766D02* +X178059802Y-46789766D01* +X177107421Y-46789766D02* +X177059802Y-46694528D01* +X177059802Y-46694528D02* +X177059802Y-46504052D01* +X177059802Y-46504052D02* +X177107421Y-46408814D01* +X177107421Y-46408814D02* +X177155040Y-46361195D01* +X177155040Y-46361195D02* +X177250278Y-46313576D01* +X177250278Y-46313576D02* +X177535992Y-46313576D01* +X177535992Y-46313576D02* +X177631230Y-46361195D01* +X177631230Y-46361195D02* +X177678850Y-46408814D01* +X177678850Y-46408814D02* +X177726469Y-46504052D01* +X177726469Y-46504052D02* +X177726469Y-46694528D01* +X177726469Y-46694528D02* +X177678850Y-46789766D01* +X145404761Y-63350057D02* +X145309523Y-63302438D01* +X145309523Y-63302438D02* +X145214285Y-63207200D01* +X145214285Y-63207200D02* +X145071428Y-63064342D01* +X145071428Y-63064342D02* +X144976190Y-63016723D01* +X144976190Y-63016723D02* +X144880952Y-63016723D01* +X144928571Y-63254819D02* +X144833333Y-63207200D01* +X144833333Y-63207200D02* +X144738095Y-63111961D01* +X144738095Y-63111961D02* +X144690476Y-62921485D01* +X144690476Y-62921485D02* +X144690476Y-62588152D01* +X144690476Y-62588152D02* +X144738095Y-62397676D01* +X144738095Y-62397676D02* +X144833333Y-62302438D01* +X144833333Y-62302438D02* +X144928571Y-62254819D01* +X144928571Y-62254819D02* +X145119047Y-62254819D01* +X145119047Y-62254819D02* +X145214285Y-62302438D01* +X145214285Y-62302438D02* +X145309523Y-62397676D01* +X145309523Y-62397676D02* +X145357142Y-62588152D01* +X145357142Y-62588152D02* +X145357142Y-62921485D01* +X145357142Y-62921485D02* +X145309523Y-63111961D01* +X145309523Y-63111961D02* +X145214285Y-63207200D01* +X145214285Y-63207200D02* +X145119047Y-63254819D01* +X145119047Y-63254819D02* +X144928571Y-63254819D01* +X146261904Y-62254819D02* +X145785714Y-62254819D01* +X145785714Y-62254819D02* +X145738095Y-62731009D01* +X145738095Y-62731009D02* +X145785714Y-62683390D01* +X145785714Y-62683390D02* +X145880952Y-62635771D01* +X145880952Y-62635771D02* +X146119047Y-62635771D01* +X146119047Y-62635771D02* +X146214285Y-62683390D01* +X146214285Y-62683390D02* +X146261904Y-62731009D01* +X146261904Y-62731009D02* +X146309523Y-62826247D01* +X146309523Y-62826247D02* +X146309523Y-63064342D01* +X146309523Y-63064342D02* +X146261904Y-63159580D01* +X146261904Y-63159580D02* +X146214285Y-63207200D01* +X146214285Y-63207200D02* +X146119047Y-63254819D01* +X146119047Y-63254819D02* +X145880952Y-63254819D01* +X145880952Y-63254819D02* +X145785714Y-63207200D01* +X145785714Y-63207200D02* +X145738095Y-63159580D01* +X96024983Y-115252680D02* +X95977364Y-115300300D01* +X95977364Y-115300300D02* +X95834507Y-115347919D01* +X95834507Y-115347919D02* +X95739269Y-115347919D01* +X95739269Y-115347919D02* +X95596412Y-115300300D01* +X95596412Y-115300300D02* +X95501174Y-115205061D01* +X95501174Y-115205061D02* +X95453555Y-115109823D01* +X95453555Y-115109823D02* +X95405936Y-114919347D01* +X95405936Y-114919347D02* +X95405936Y-114776490D01* +X95405936Y-114776490D02* +X95453555Y-114586014D01* +X95453555Y-114586014D02* +X95501174Y-114490776D01* +X95501174Y-114490776D02* +X95596412Y-114395538D01* +X95596412Y-114395538D02* +X95739269Y-114347919D01* +X95739269Y-114347919D02* +X95834507Y-114347919D01* +X95834507Y-114347919D02* +X95977364Y-114395538D01* +X95977364Y-114395538D02* +X96024983Y-114443157D01* +X96358317Y-114347919D02* +X97024983Y-114347919D01* +X97024983Y-114347919D02* +X96596412Y-115347919D01* +D17* +X209506666Y-132029271D02* +X209506666Y-130759271D01* +X209506666Y-130759271D02* +X209930000Y-131666414D01* +X209930000Y-131666414D02* +X210353333Y-130759271D01* +X210353333Y-130759271D02* +X210353333Y-132029271D01* +X210958095Y-132029271D02* +X210958095Y-130759271D01* +X210958095Y-131364033D02* +X211683810Y-131364033D01* +X211683810Y-132029271D02* +X211683810Y-130759271D01* +X212832857Y-131182604D02* +X212832857Y-132029271D01* +X212530476Y-130698795D02* +X212228095Y-131605937D01* +X212228095Y-131605937D02* +X213014286Y-131605937D01* +D16* +X127703555Y-43227919D02* +X127703555Y-42227919D01* +X127703555Y-42227919D02* +X128084507Y-42227919D01* +X128084507Y-42227919D02* +X128179745Y-42275538D01* +X128179745Y-42275538D02* +X128227364Y-42323157D01* +X128227364Y-42323157D02* +X128274983Y-42418395D01* +X128274983Y-42418395D02* +X128274983Y-42561252D01* +X128274983Y-42561252D02* +X128227364Y-42656490D01* +X128227364Y-42656490D02* +X128179745Y-42704109D01* +X128179745Y-42704109D02* +X128084507Y-42751728D01* +X128084507Y-42751728D02* +X127703555Y-42751728D01* +X128655936Y-42323157D02* +X128703555Y-42275538D01* +X128703555Y-42275538D02* +X128798793Y-42227919D01* +X128798793Y-42227919D02* +X129036888Y-42227919D01* +X129036888Y-42227919D02* +X129132126Y-42275538D01* +X129132126Y-42275538D02* +X129179745Y-42323157D01* +X129179745Y-42323157D02* +X129227364Y-42418395D01* +X129227364Y-42418395D02* +X129227364Y-42513633D01* +X129227364Y-42513633D02* +X129179745Y-42656490D01* +X129179745Y-42656490D02* +X128608317Y-43227919D01* +X128608317Y-43227919D02* +X129227364Y-43227919D01* +X173223792Y-44347919D02* +X172890459Y-43871728D01* +X172652364Y-44347919D02* +X172652364Y-43347919D01* +X172652364Y-43347919D02* +X173033316Y-43347919D01* +X173033316Y-43347919D02* +X173128554Y-43395538D01* +X173128554Y-43395538D02* +X173176173Y-43443157D01* +X173176173Y-43443157D02* +X173223792Y-43538395D01* +X173223792Y-43538395D02* +X173223792Y-43681252D01* +X173223792Y-43681252D02* +X173176173Y-43776490D01* +X173176173Y-43776490D02* +X173128554Y-43824109D01* +X173128554Y-43824109D02* +X173033316Y-43871728D01* +X173033316Y-43871728D02* +X172652364Y-43871728D01* +X173604745Y-43443157D02* +X173652364Y-43395538D01* +X173652364Y-43395538D02* +X173747602Y-43347919D01* +X173747602Y-43347919D02* +X173985697Y-43347919D01* +X173985697Y-43347919D02* +X174080935Y-43395538D01* +X174080935Y-43395538D02* +X174128554Y-43443157D01* +X174128554Y-43443157D02* +X174176173Y-43538395D01* +X174176173Y-43538395D02* +X174176173Y-43633633D01* +X174176173Y-43633633D02* +X174128554Y-43776490D01* +X174128554Y-43776490D02* +X173557126Y-44347919D01* +X173557126Y-44347919D02* +X174176173Y-44347919D01* +X174795221Y-43347919D02* +X174890459Y-43347919D01* +X174890459Y-43347919D02* +X174985697Y-43395538D01* +X174985697Y-43395538D02* +X175033316Y-43443157D01* +X175033316Y-43443157D02* +X175080935Y-43538395D01* +X175080935Y-43538395D02* +X175128554Y-43728871D01* +X175128554Y-43728871D02* +X175128554Y-43966966D01* +X175128554Y-43966966D02* +X175080935Y-44157442D01* +X175080935Y-44157442D02* +X175033316Y-44252680D01* +X175033316Y-44252680D02* +X174985697Y-44300300D01* +X174985697Y-44300300D02* +X174890459Y-44347919D01* +X174890459Y-44347919D02* +X174795221Y-44347919D01* +X174795221Y-44347919D02* +X174699983Y-44300300D01* +X174699983Y-44300300D02* +X174652364Y-44252680D01* +X174652364Y-44252680D02* +X174604745Y-44157442D01* +X174604745Y-44157442D02* +X174557126Y-43966966D01* +X174557126Y-43966966D02* +X174557126Y-43728871D01* +X174557126Y-43728871D02* +X174604745Y-43538395D01* +X174604745Y-43538395D02* +X174652364Y-43443157D01* +X174652364Y-43443157D02* +X174699983Y-43395538D01* +X174699983Y-43395538D02* +X174795221Y-43347919D01* +X186607125Y-108752680D02* +X186559506Y-108800300D01* +X186559506Y-108800300D02* +X186416649Y-108847919D01* +X186416649Y-108847919D02* +X186321411Y-108847919D01* +X186321411Y-108847919D02* +X186178554Y-108800300D01* +X186178554Y-108800300D02* +X186083316Y-108705061D01* +X186083316Y-108705061D02* +X186035697Y-108609823D01* +X186035697Y-108609823D02* +X185988078Y-108419347D01* +X185988078Y-108419347D02* +X185988078Y-108276490D01* +X185988078Y-108276490D02* +X186035697Y-108086014D01* +X186035697Y-108086014D02* +X186083316Y-107990776D01* +X186083316Y-107990776D02* +X186178554Y-107895538D01* +X186178554Y-107895538D02* +X186321411Y-107847919D01* +X186321411Y-107847919D02* +X186416649Y-107847919D01* +X186416649Y-107847919D02* +X186559506Y-107895538D01* +X186559506Y-107895538D02* +X186607125Y-107943157D01* +X187035697Y-108847919D02* +X187035697Y-107847919D01* +X187035697Y-108228871D02* +X187130935Y-108181252D01* +X187130935Y-108181252D02* +X187321411Y-108181252D01* +X187321411Y-108181252D02* +X187416649Y-108228871D01* +X187416649Y-108228871D02* +X187464268Y-108276490D01* +X187464268Y-108276490D02* +X187511887Y-108371728D01* +X187511887Y-108371728D02* +X187511887Y-108657442D01* +X187511887Y-108657442D02* +X187464268Y-108752680D01* +X187464268Y-108752680D02* +X187416649Y-108800300D01* +X187416649Y-108800300D02* +X187321411Y-108847919D01* +X187321411Y-108847919D02* +X187130935Y-108847919D01* +X187130935Y-108847919D02* +X187035697Y-108800300D01* +X187892840Y-108800300D02* +X187988078Y-108847919D01* +X187988078Y-108847919D02* +X188178554Y-108847919D01* +X188178554Y-108847919D02* +X188273792Y-108800300D01* +X188273792Y-108800300D02* +X188321411Y-108705061D01* +X188321411Y-108705061D02* +X188321411Y-108657442D01* +X188321411Y-108657442D02* +X188273792Y-108562204D01* +X188273792Y-108562204D02* +X188178554Y-108514585D01* +X188178554Y-108514585D02* +X188035697Y-108514585D01* +X188035697Y-108514585D02* +X187940459Y-108466966D01* +X187940459Y-108466966D02* +X187892840Y-108371728D01* +X187892840Y-108371728D02* +X187892840Y-108324109D01* +X187892840Y-108324109D02* +X187940459Y-108228871D01* +X187940459Y-108228871D02* +X188035697Y-108181252D01* +X188035697Y-108181252D02* +X188178554Y-108181252D01* +X188178554Y-108181252D02* +X188273792Y-108228871D01* +X188607126Y-108181252D02* +X188988078Y-108181252D01* +X188749983Y-107847919D02* +X188749983Y-108705061D01* +X188749983Y-108705061D02* +X188797602Y-108800300D01* +X188797602Y-108800300D02* +X188892840Y-108847919D01* +X188892840Y-108847919D02* +X188988078Y-108847919D01* +X189273793Y-107943157D02* +X189321412Y-107895538D01* +X189321412Y-107895538D02* +X189416650Y-107847919D01* +X189416650Y-107847919D02* +X189654745Y-107847919D01* +X189654745Y-107847919D02* +X189749983Y-107895538D01* +X189749983Y-107895538D02* +X189797602Y-107943157D01* +X189797602Y-107943157D02* +X189845221Y-108038395D01* +X189845221Y-108038395D02* +X189845221Y-108133633D01* +X189845221Y-108133633D02* +X189797602Y-108276490D01* +X189797602Y-108276490D02* +X189226174Y-108847919D01* +X189226174Y-108847919D02* +X189845221Y-108847919D01* +X96485697Y-101347919D02* +X96152364Y-100871728D01* +X95914269Y-101347919D02* +X95914269Y-100347919D01* +X95914269Y-100347919D02* +X96295221Y-100347919D01* +X96295221Y-100347919D02* +X96390459Y-100395538D01* +X96390459Y-100395538D02* +X96438078Y-100443157D01* +X96438078Y-100443157D02* +X96485697Y-100538395D01* +X96485697Y-100538395D02* +X96485697Y-100681252D01* +X96485697Y-100681252D02* +X96438078Y-100776490D01* +X96438078Y-100776490D02* +X96390459Y-100824109D01* +X96390459Y-100824109D02* +X96295221Y-100871728D01* +X96295221Y-100871728D02* +X95914269Y-100871728D01* +X96771412Y-100681252D02* +X97152364Y-100681252D01* +X96914269Y-100347919D02* +X96914269Y-101205061D01* +X96914269Y-101205061D02* +X96961888Y-101300300D01* +X96961888Y-101300300D02* +X97057126Y-101347919D01* +X97057126Y-101347919D02* +X97152364Y-101347919D01* +X97438079Y-101300300D02* +X97533317Y-101347919D01* +X97533317Y-101347919D02* +X97723793Y-101347919D01* +X97723793Y-101347919D02* +X97819031Y-101300300D01* +X97819031Y-101300300D02* +X97866650Y-101205061D01* +X97866650Y-101205061D02* +X97866650Y-101157442D01* +X97866650Y-101157442D02* +X97819031Y-101062204D01* +X97819031Y-101062204D02* +X97723793Y-101014585D01* +X97723793Y-101014585D02* +X97580936Y-101014585D01* +X97580936Y-101014585D02* +X97485698Y-100966966D01* +X97485698Y-100966966D02* +X97438079Y-100871728D01* +X97438079Y-100871728D02* +X97438079Y-100824109D01* +X97438079Y-100824109D02* +X97485698Y-100728871D01* +X97485698Y-100728871D02* +X97580936Y-100681252D01* +X97580936Y-100681252D02* +X97723793Y-100681252D01* +X97723793Y-100681252D02* +X97819031Y-100728871D01* +X106096411Y-94473157D02* +X106001173Y-94425538D01* +X106001173Y-94425538D02* +X105905935Y-94330300D01* +X105905935Y-94330300D02* +X105763078Y-94187442D01* +X105763078Y-94187442D02* +X105667840Y-94139823D01* +X105667840Y-94139823D02* +X105572602Y-94139823D01* +X105620221Y-94377919D02* +X105524983Y-94330300D01* +X105524983Y-94330300D02* +X105429745Y-94235061D01* +X105429745Y-94235061D02* +X105382126Y-94044585D01* +X105382126Y-94044585D02* +X105382126Y-93711252D01* +X105382126Y-93711252D02* +X105429745Y-93520776D01* +X105429745Y-93520776D02* +X105524983Y-93425538D01* +X105524983Y-93425538D02* +X105620221Y-93377919D01* +X105620221Y-93377919D02* +X105810697Y-93377919D01* +X105810697Y-93377919D02* +X105905935Y-93425538D01* +X105905935Y-93425538D02* +X106001173Y-93520776D01* +X106001173Y-93520776D02* +X106048792Y-93711252D01* +X106048792Y-93711252D02* +X106048792Y-94044585D01* +X106048792Y-94044585D02* +X106001173Y-94235061D01* +X106001173Y-94235061D02* +X105905935Y-94330300D01* +X105905935Y-94330300D02* +X105810697Y-94377919D01* +X105810697Y-94377919D02* +X105620221Y-94377919D01* +X106429745Y-93473157D02* +X106477364Y-93425538D01* +X106477364Y-93425538D02* +X106572602Y-93377919D01* +X106572602Y-93377919D02* +X106810697Y-93377919D01* +X106810697Y-93377919D02* +X106905935Y-93425538D01* +X106905935Y-93425538D02* +X106953554Y-93473157D01* +X106953554Y-93473157D02* +X107001173Y-93568395D01* +X107001173Y-93568395D02* +X107001173Y-93663633D01* +X107001173Y-93663633D02* +X106953554Y-93806490D01* +X106953554Y-93806490D02* +X106382126Y-94377919D01* +X106382126Y-94377919D02* +X107001173Y-94377919D01* +X167583316Y-44252680D02* +X167535697Y-44300300D01* +X167535697Y-44300300D02* +X167392840Y-44347919D01* +X167392840Y-44347919D02* +X167297602Y-44347919D01* +X167297602Y-44347919D02* +X167154745Y-44300300D01* +X167154745Y-44300300D02* +X167059507Y-44205061D01* +X167059507Y-44205061D02* +X167011888Y-44109823D01* +X167011888Y-44109823D02* +X166964269Y-43919347D01* +X166964269Y-43919347D02* +X166964269Y-43776490D01* +X166964269Y-43776490D02* +X167011888Y-43586014D01* +X167011888Y-43586014D02* +X167059507Y-43490776D01* +X167059507Y-43490776D02* +X167154745Y-43395538D01* +X167154745Y-43395538D02* +X167297602Y-43347919D01* +X167297602Y-43347919D02* +X167392840Y-43347919D01* +X167392840Y-43347919D02* +X167535697Y-43395538D01* +X167535697Y-43395538D02* +X167583316Y-43443157D01* +X168011888Y-44347919D02* +X168011888Y-43347919D01* +X168011888Y-43728871D02* +X168107126Y-43681252D01* +X168107126Y-43681252D02* +X168297602Y-43681252D01* +X168297602Y-43681252D02* +X168392840Y-43728871D01* +X168392840Y-43728871D02* +X168440459Y-43776490D01* +X168440459Y-43776490D02* +X168488078Y-43871728D01* +X168488078Y-43871728D02* +X168488078Y-44157442D01* +X168488078Y-44157442D02* +X168440459Y-44252680D01* +X168440459Y-44252680D02* +X168392840Y-44300300D01* +X168392840Y-44300300D02* +X168297602Y-44347919D01* +X168297602Y-44347919D02* +X168107126Y-44347919D01* +X168107126Y-44347919D02* +X168011888Y-44300300D01* +X168869031Y-44300300D02* +X168964269Y-44347919D01* +X168964269Y-44347919D02* +X169154745Y-44347919D01* +X169154745Y-44347919D02* +X169249983Y-44300300D01* +X169249983Y-44300300D02* +X169297602Y-44205061D01* +X169297602Y-44205061D02* +X169297602Y-44157442D01* +X169297602Y-44157442D02* +X169249983Y-44062204D01* +X169249983Y-44062204D02* +X169154745Y-44014585D01* +X169154745Y-44014585D02* +X169011888Y-44014585D01* +X169011888Y-44014585D02* +X168916650Y-43966966D01* +X168916650Y-43966966D02* +X168869031Y-43871728D01* +X168869031Y-43871728D02* +X168869031Y-43824109D01* +X168869031Y-43824109D02* +X168916650Y-43728871D01* +X168916650Y-43728871D02* +X169011888Y-43681252D01* +X169011888Y-43681252D02* +X169154745Y-43681252D01* +X169154745Y-43681252D02* +X169249983Y-43728871D01* +X169583317Y-43681252D02* +X169964269Y-43681252D01* +X169726174Y-43347919D02* +X169726174Y-44205061D01* +X169726174Y-44205061D02* +X169773793Y-44300300D01* +X169773793Y-44300300D02* +X169869031Y-44347919D01* +X169869031Y-44347919D02* +X169964269Y-44347919D01* +X110429745Y-44397919D02* +X110429745Y-43397919D01* +X110429745Y-43874109D02* +X111001173Y-43874109D01* +X111001173Y-44397919D02* +X111001173Y-43397919D01* +X111382126Y-43397919D02* +X112001173Y-43397919D01* +X112001173Y-43397919D02* +X111667840Y-43778871D01* +X111667840Y-43778871D02* +X111810697Y-43778871D01* +X111810697Y-43778871D02* +X111905935Y-43826490D01* +X111905935Y-43826490D02* +X111953554Y-43874109D01* +X111953554Y-43874109D02* +X112001173Y-43969347D01* +X112001173Y-43969347D02* +X112001173Y-44207442D01* +X112001173Y-44207442D02* +X111953554Y-44302680D01* +X111953554Y-44302680D02* +X111905935Y-44350300D01* +X111905935Y-44350300D02* +X111810697Y-44397919D01* +X111810697Y-44397919D02* +X111524983Y-44397919D01* +X111524983Y-44397919D02* +X111429745Y-44350300D01* +X111429745Y-44350300D02* +X111382126Y-44302680D01* +X167524983Y-110477919D02* +X167048793Y-110477919D01* +X167048793Y-110477919D02* +X167048793Y-109477919D01* +X168286888Y-109477919D02* +X168096412Y-109477919D01* +X168096412Y-109477919D02* +X168001174Y-109525538D01* +X168001174Y-109525538D02* +X167953555Y-109573157D01* +X167953555Y-109573157D02* +X167858317Y-109716014D01* +X167858317Y-109716014D02* +X167810698Y-109906490D01* +X167810698Y-109906490D02* +X167810698Y-110287442D01* +X167810698Y-110287442D02* +X167858317Y-110382680D01* +X167858317Y-110382680D02* +X167905936Y-110430300D01* +X167905936Y-110430300D02* +X168001174Y-110477919D01* +X168001174Y-110477919D02* +X168191650Y-110477919D01* +X168191650Y-110477919D02* +X168286888Y-110430300D01* +X168286888Y-110430300D02* +X168334507Y-110382680D01* +X168334507Y-110382680D02* +X168382126Y-110287442D01* +X168382126Y-110287442D02* +X168382126Y-110049347D01* +X168382126Y-110049347D02* +X168334507Y-109954109D01* +X168334507Y-109954109D02* +X168286888Y-109906490D01* +X168286888Y-109906490D02* +X168191650Y-109858871D01* +X168191650Y-109858871D02* +X168001174Y-109858871D01* +X168001174Y-109858871D02* +X167905936Y-109906490D01* +X167905936Y-109906490D02* +X167858317Y-109954109D01* +X167858317Y-109954109D02* +X167810698Y-110049347D01* +X129548792Y-95002680D02* +X129501173Y-95050300D01* +X129501173Y-95050300D02* +X129358316Y-95097919D01* +X129358316Y-95097919D02* +X129263078Y-95097919D01* +X129263078Y-95097919D02* +X129120221Y-95050300D01* +X129120221Y-95050300D02* +X129024983Y-94955061D01* +X129024983Y-94955061D02* +X128977364Y-94859823D01* +X128977364Y-94859823D02* +X128929745Y-94669347D01* +X128929745Y-94669347D02* +X128929745Y-94526490D01* +X128929745Y-94526490D02* +X128977364Y-94336014D01* +X128977364Y-94336014D02* +X129024983Y-94240776D01* +X129024983Y-94240776D02* +X129120221Y-94145538D01* +X129120221Y-94145538D02* +X129263078Y-94097919D01* +X129263078Y-94097919D02* +X129358316Y-94097919D01* +X129358316Y-94097919D02* +X129501173Y-94145538D01* +X129501173Y-94145538D02* +X129548792Y-94193157D01* +X129882126Y-94097919D02* +X130501173Y-94097919D01* +X130501173Y-94097919D02* +X130167840Y-94478871D01* +X130167840Y-94478871D02* +X130310697Y-94478871D01* +X130310697Y-94478871D02* +X130405935Y-94526490D01* +X130405935Y-94526490D02* +X130453554Y-94574109D01* +X130453554Y-94574109D02* +X130501173Y-94669347D01* +X130501173Y-94669347D02* +X130501173Y-94907442D01* +X130501173Y-94907442D02* +X130453554Y-95002680D01* +X130453554Y-95002680D02* +X130405935Y-95050300D01* +X130405935Y-95050300D02* +X130310697Y-95097919D01* +X130310697Y-95097919D02* +X130024983Y-95097919D01* +X130024983Y-95097919D02* +X129929745Y-95050300D01* +X129929745Y-95050300D02* +X129882126Y-95002680D01* +X131405935Y-94097919D02* +X130929745Y-94097919D01* +X130929745Y-94097919D02* +X130882126Y-94574109D01* +X130882126Y-94574109D02* +X130929745Y-94526490D01* +X130929745Y-94526490D02* +X131024983Y-94478871D01* +X131024983Y-94478871D02* +X131263078Y-94478871D01* +X131263078Y-94478871D02* +X131358316Y-94526490D01* +X131358316Y-94526490D02* +X131405935Y-94574109D01* +X131405935Y-94574109D02* +X131453554Y-94669347D01* +X131453554Y-94669347D02* +X131453554Y-94907442D01* +X131453554Y-94907442D02* +X131405935Y-95002680D01* +X131405935Y-95002680D02* +X131358316Y-95050300D01* +X131358316Y-95050300D02* +X131263078Y-95097919D01* +X131263078Y-95097919D02* +X131024983Y-95097919D01* +X131024983Y-95097919D02* +X130929745Y-95050300D01* +X130929745Y-95050300D02* +X130882126Y-95002680D01* +X129608095Y-119004819D02* +X129608095Y-119814342D01* +X129608095Y-119814342D02* +X129655714Y-119909580D01* +X129655714Y-119909580D02* +X129703333Y-119957200D01* +X129703333Y-119957200D02* +X129798571Y-120004819D01* +X129798571Y-120004819D02* +X129989047Y-120004819D01* +X129989047Y-120004819D02* +X130084285Y-119957200D01* +X130084285Y-119957200D02* +X130131904Y-119909580D01* +X130131904Y-119909580D02* +X130179523Y-119814342D01* +X130179523Y-119814342D02* +X130179523Y-119004819D01* +X131084285Y-119338152D02* +X131084285Y-120004819D01* +X130846190Y-118957200D02* +X130608095Y-119671485D01* +X130608095Y-119671485D02* +X131227142Y-119671485D01* +X201587483Y-47347919D02* +X201254150Y-46871728D01* +X201016055Y-47347919D02* +X201016055Y-46347919D01* +X201016055Y-46347919D02* +X201397007Y-46347919D01* +X201397007Y-46347919D02* +X201492245Y-46395538D01* +X201492245Y-46395538D02* +X201539864Y-46443157D01* +X201539864Y-46443157D02* +X201587483Y-46538395D01* +X201587483Y-46538395D02* +X201587483Y-46681252D01* +X201587483Y-46681252D02* +X201539864Y-46776490D01* +X201539864Y-46776490D02* +X201492245Y-46824109D01* +X201492245Y-46824109D02* +X201397007Y-46871728D01* +X201397007Y-46871728D02* +X201016055Y-46871728D01* +X202349388Y-46824109D02* +X202492245Y-46871728D01* +X202492245Y-46871728D02* +X202539864Y-46919347D01* +X202539864Y-46919347D02* +X202587483Y-47014585D01* +X202587483Y-47014585D02* +X202587483Y-47157442D01* +X202587483Y-47157442D02* +X202539864Y-47252680D01* +X202539864Y-47252680D02* +X202492245Y-47300300D01* +X202492245Y-47300300D02* +X202397007Y-47347919D01* +X202397007Y-47347919D02* +X202016055Y-47347919D01* +X202016055Y-47347919D02* +X202016055Y-46347919D01* +X202016055Y-46347919D02* +X202349388Y-46347919D01* +X202349388Y-46347919D02* +X202444626Y-46395538D01* +X202444626Y-46395538D02* +X202492245Y-46443157D01* +X202492245Y-46443157D02* +X202539864Y-46538395D01* +X202539864Y-46538395D02* +X202539864Y-46633633D01* +X202539864Y-46633633D02* +X202492245Y-46728871D01* +X202492245Y-46728871D02* +X202444626Y-46776490D01* +X202444626Y-46776490D02* +X202349388Y-46824109D01* +X202349388Y-46824109D02* +X202016055Y-46824109D01* +X202920817Y-46347919D02* +X203539864Y-46347919D01* +X203539864Y-46347919D02* +X203206531Y-46728871D01* +X203206531Y-46728871D02* +X203349388Y-46728871D01* +X203349388Y-46728871D02* +X203444626Y-46776490D01* +X203444626Y-46776490D02* +X203492245Y-46824109D01* +X203492245Y-46824109D02* +X203539864Y-46919347D01* +X203539864Y-46919347D02* +X203539864Y-47157442D01* +X203539864Y-47157442D02* +X203492245Y-47252680D01* +X203492245Y-47252680D02* +X203444626Y-47300300D01* +X203444626Y-47300300D02* +X203349388Y-47347919D01* +X203349388Y-47347919D02* +X203063674Y-47347919D01* +X203063674Y-47347919D02* +X202968436Y-47300300D01* +X202968436Y-47300300D02* +X202920817Y-47252680D01* +X111929745Y-105129919D02* +X112501173Y-105129919D01* +X112215459Y-106129919D02* +X112215459Y-105129919D01* +X112834507Y-106129919D02* +X112834507Y-105129919D01* +X112834507Y-105129919D02* +X113215459Y-105129919D01* +X113215459Y-105129919D02* +X113310697Y-105177538D01* +X113310697Y-105177538D02* +X113358316Y-105225157D01* +X113358316Y-105225157D02* +X113405935Y-105320395D01* +X113405935Y-105320395D02* +X113405935Y-105463252D01* +X113405935Y-105463252D02* +X113358316Y-105558490D01* +X113358316Y-105558490D02* +X113310697Y-105606109D01* +X113310697Y-105606109D02* +X113215459Y-105653728D01* +X113215459Y-105653728D02* +X112834507Y-105653728D01* +X114358316Y-106129919D02* +X113786888Y-106129919D01* +X114072602Y-106129919D02* +X114072602Y-105129919D01* +X114072602Y-105129919D02* +X113977364Y-105272776D01* +X113977364Y-105272776D02* +X113882126Y-105368014D01* +X113882126Y-105368014D02* +X113786888Y-105415633D01* +X187124983Y-53477919D02* +X186648793Y-53477919D01* +X186648793Y-53477919D02* +X186648793Y-52477919D01* +X187410698Y-52573157D02* +X187458317Y-52525538D01* +X187458317Y-52525538D02* +X187553555Y-52477919D01* +X187553555Y-52477919D02* +X187791650Y-52477919D01* +X187791650Y-52477919D02* +X187886888Y-52525538D01* +X187886888Y-52525538D02* +X187934507Y-52573157D01* +X187934507Y-52573157D02* +X187982126Y-52668395D01* +X187982126Y-52668395D02* +X187982126Y-52763633D01* +X187982126Y-52763633D02* +X187934507Y-52906490D01* +X187934507Y-52906490D02* +X187363079Y-53477919D01* +X187363079Y-53477919D02* +X187982126Y-53477919D01* +X101424983Y-82252680D02* +X101377364Y-82300300D01* +X101377364Y-82300300D02* +X101234507Y-82347919D01* +X101234507Y-82347919D02* +X101139269Y-82347919D01* +X101139269Y-82347919D02* +X100996412Y-82300300D01* +X100996412Y-82300300D02* +X100901174Y-82205061D01* +X100901174Y-82205061D02* +X100853555Y-82109823D01* +X100853555Y-82109823D02* +X100805936Y-81919347D01* +X100805936Y-81919347D02* +X100805936Y-81776490D01* +X100805936Y-81776490D02* +X100853555Y-81586014D01* +X100853555Y-81586014D02* +X100901174Y-81490776D01* +X100901174Y-81490776D02* +X100996412Y-81395538D01* +X100996412Y-81395538D02* +X101139269Y-81347919D01* +X101139269Y-81347919D02* +X101234507Y-81347919D01* +X101234507Y-81347919D02* +X101377364Y-81395538D01* +X101377364Y-81395538D02* +X101424983Y-81443157D01* +X101901174Y-82347919D02* +X102091650Y-82347919D01* +X102091650Y-82347919D02* +X102186888Y-82300300D01* +X102186888Y-82300300D02* +X102234507Y-82252680D01* +X102234507Y-82252680D02* +X102329745Y-82109823D01* +X102329745Y-82109823D02* +X102377364Y-81919347D01* +X102377364Y-81919347D02* +X102377364Y-81538395D01* +X102377364Y-81538395D02* +X102329745Y-81443157D01* +X102329745Y-81443157D02* +X102282126Y-81395538D01* +X102282126Y-81395538D02* +X102186888Y-81347919D01* +X102186888Y-81347919D02* +X101996412Y-81347919D01* +X101996412Y-81347919D02* +X101901174Y-81395538D01* +X101901174Y-81395538D02* +X101853555Y-81443157D01* +X101853555Y-81443157D02* +X101805936Y-81538395D01* +X101805936Y-81538395D02* +X101805936Y-81776490D01* +X101805936Y-81776490D02* +X101853555Y-81871728D01* +X101853555Y-81871728D02* +X101901174Y-81919347D01* +X101901174Y-81919347D02* +X101996412Y-81966966D01* +X101996412Y-81966966D02* +X102186888Y-81966966D01* +X102186888Y-81966966D02* +X102282126Y-81919347D01* +X102282126Y-81919347D02* +X102329745Y-81871728D01* +X102329745Y-81871728D02* +X102377364Y-81776490D01* +X146341667Y-133007200D02* +X146484524Y-133054819D01* +X146484524Y-133054819D02* +X146722619Y-133054819D01* +X146722619Y-133054819D02* +X146817857Y-133007200D01* +X146817857Y-133007200D02* +X146865476Y-132959580D01* +X146865476Y-132959580D02* +X146913095Y-132864342D01* +X146913095Y-132864342D02* +X146913095Y-132769104D01* +X146913095Y-132769104D02* +X146865476Y-132673866D01* +X146865476Y-132673866D02* +X146817857Y-132626247D01* +X146817857Y-132626247D02* +X146722619Y-132578628D01* +X146722619Y-132578628D02* +X146532143Y-132531009D01* +X146532143Y-132531009D02* +X146436905Y-132483390D01* +X146436905Y-132483390D02* +X146389286Y-132435771D01* +X146389286Y-132435771D02* +X146341667Y-132340533D01* +X146341667Y-132340533D02* +X146341667Y-132245295D01* +X146341667Y-132245295D02* +X146389286Y-132150057D01* +X146389286Y-132150057D02* +X146436905Y-132102438D01* +X146436905Y-132102438D02* +X146532143Y-132054819D01* +X146532143Y-132054819D02* +X146770238Y-132054819D01* +X146770238Y-132054819D02* +X146913095Y-132102438D01* +X147246429Y-132054819D02* +X147484524Y-133054819D01* +X147484524Y-133054819D02* +X147675000Y-132340533D01* +X147675000Y-132340533D02* +X147865476Y-133054819D01* +X147865476Y-133054819D02* +X148103572Y-132054819D01* +X148913095Y-132388152D02* +X148913095Y-133054819D01* +X148675000Y-132007200D02* +X148436905Y-132721485D01* +X148436905Y-132721485D02* +X149055952Y-132721485D01* +X149960714Y-132102438D02* +X149865476Y-132054819D01* +X149865476Y-132054819D02* +X149722619Y-132054819D01* +X149722619Y-132054819D02* +X149579762Y-132102438D01* +X149579762Y-132102438D02* +X149484524Y-132197676D01* +X149484524Y-132197676D02* +X149436905Y-132292914D01* +X149436905Y-132292914D02* +X149389286Y-132483390D01* +X149389286Y-132483390D02* +X149389286Y-132626247D01* +X149389286Y-132626247D02* +X149436905Y-132816723D01* +X149436905Y-132816723D02* +X149484524Y-132911961D01* +X149484524Y-132911961D02* +X149579762Y-133007200D01* +X149579762Y-133007200D02* +X149722619Y-133054819D01* +X149722619Y-133054819D02* +X149817857Y-133054819D01* +X149817857Y-133054819D02* +X149960714Y-133007200D01* +X149960714Y-133007200D02* +X150008333Y-132959580D01* +X150008333Y-132959580D02* +X150008333Y-132626247D01* +X150008333Y-132626247D02* +X149817857Y-132626247D01* +X196208316Y-71777919D02* +X196208316Y-72492204D01* +X196208316Y-72492204D02* +X196160697Y-72635061D01* +X196160697Y-72635061D02* +X196065459Y-72730300D01* +X196065459Y-72730300D02* +X195922602Y-72777919D01* +X195922602Y-72777919D02* +X195827364Y-72777919D01* +X196827364Y-72206490D02* +X196732126Y-72158871D01* +X196732126Y-72158871D02* +X196684507Y-72111252D01* +X196684507Y-72111252D02* +X196636888Y-72016014D01* +X196636888Y-72016014D02* +X196636888Y-71968395D01* +X196636888Y-71968395D02* +X196684507Y-71873157D01* +X196684507Y-71873157D02* +X196732126Y-71825538D01* +X196732126Y-71825538D02* +X196827364Y-71777919D01* +X196827364Y-71777919D02* +X197017840Y-71777919D01* +X197017840Y-71777919D02* +X197113078Y-71825538D01* +X197113078Y-71825538D02* +X197160697Y-71873157D01* +X197160697Y-71873157D02* +X197208316Y-71968395D01* +X197208316Y-71968395D02* +X197208316Y-72016014D01* +X197208316Y-72016014D02* +X197160697Y-72111252D01* +X197160697Y-72111252D02* +X197113078Y-72158871D01* +X197113078Y-72158871D02* +X197017840Y-72206490D01* +X197017840Y-72206490D02* +X196827364Y-72206490D01* +X196827364Y-72206490D02* +X196732126Y-72254109D01* +X196732126Y-72254109D02* +X196684507Y-72301728D01* +X196684507Y-72301728D02* +X196636888Y-72396966D01* +X196636888Y-72396966D02* +X196636888Y-72587442D01* +X196636888Y-72587442D02* +X196684507Y-72682680D01* +X196684507Y-72682680D02* +X196732126Y-72730300D01* +X196732126Y-72730300D02* +X196827364Y-72777919D01* +X196827364Y-72777919D02* +X197017840Y-72777919D01* +X197017840Y-72777919D02* +X197113078Y-72730300D01* +X197113078Y-72730300D02* +X197160697Y-72682680D01* +X197160697Y-72682680D02* +X197208316Y-72587442D01* +X197208316Y-72587442D02* +X197208316Y-72396966D01* +X197208316Y-72396966D02* +X197160697Y-72301728D01* +X197160697Y-72301728D02* +X197113078Y-72254109D01* +X197113078Y-72254109D02* +X197017840Y-72206490D01* +X168454745Y-55582919D02* +X168454745Y-56392442D01* +X168454745Y-56392442D02* +X168502364Y-56487680D01* +X168502364Y-56487680D02* +X168549983Y-56535300D01* +X168549983Y-56535300D02* +X168645221Y-56582919D01* +X168645221Y-56582919D02* +X168835697Y-56582919D01* +X168835697Y-56582919D02* +X168930935Y-56535300D01* +X168930935Y-56535300D02* +X168978554Y-56487680D01* +X168978554Y-56487680D02* +X169026173Y-56392442D01* +X169026173Y-56392442D02* +X169026173Y-55582919D01* +X169454745Y-55678157D02* +X169502364Y-55630538D01* +X169502364Y-55630538D02* +X169597602Y-55582919D01* +X169597602Y-55582919D02* +X169835697Y-55582919D01* +X169835697Y-55582919D02* +X169930935Y-55630538D01* +X169930935Y-55630538D02* +X169978554Y-55678157D01* +X169978554Y-55678157D02* +X170026173Y-55773395D01* +X170026173Y-55773395D02* +X170026173Y-55868633D01* +X170026173Y-55868633D02* +X169978554Y-56011490D01* +X169978554Y-56011490D02* +X169407126Y-56582919D01* +X169407126Y-56582919D02* +X170026173Y-56582919D01* +X205587483Y-47347919D02* +X205254150Y-46871728D01* +X205016055Y-47347919D02* +X205016055Y-46347919D01* +X205016055Y-46347919D02* +X205397007Y-46347919D01* +X205397007Y-46347919D02* +X205492245Y-46395538D01* +X205492245Y-46395538D02* +X205539864Y-46443157D01* +X205539864Y-46443157D02* +X205587483Y-46538395D01* +X205587483Y-46538395D02* +X205587483Y-46681252D01* +X205587483Y-46681252D02* +X205539864Y-46776490D01* +X205539864Y-46776490D02* +X205492245Y-46824109D01* +X205492245Y-46824109D02* +X205397007Y-46871728D01* +X205397007Y-46871728D02* +X205016055Y-46871728D01* +X206349388Y-46824109D02* +X206492245Y-46871728D01* +X206492245Y-46871728D02* +X206539864Y-46919347D01* +X206539864Y-46919347D02* +X206587483Y-47014585D01* +X206587483Y-47014585D02* +X206587483Y-47157442D01* +X206587483Y-47157442D02* +X206539864Y-47252680D01* +X206539864Y-47252680D02* +X206492245Y-47300300D01* +X206492245Y-47300300D02* +X206397007Y-47347919D01* +X206397007Y-47347919D02* +X206016055Y-47347919D01* +X206016055Y-47347919D02* +X206016055Y-46347919D01* +X206016055Y-46347919D02* +X206349388Y-46347919D01* +X206349388Y-46347919D02* +X206444626Y-46395538D01* +X206444626Y-46395538D02* +X206492245Y-46443157D01* +X206492245Y-46443157D02* +X206539864Y-46538395D01* +X206539864Y-46538395D02* +X206539864Y-46633633D01* +X206539864Y-46633633D02* +X206492245Y-46728871D01* +X206492245Y-46728871D02* +X206444626Y-46776490D01* +X206444626Y-46776490D02* +X206349388Y-46824109D01* +X206349388Y-46824109D02* +X206016055Y-46824109D01* +X207444626Y-46681252D02* +X207444626Y-47347919D01* +X207206531Y-46300300D02* +X206968436Y-47014585D01* +X206968436Y-47014585D02* +X207587483Y-47014585D01* +X164659580Y-46092857D02* +X164707200Y-46140476D01* +X164707200Y-46140476D02* +X164754819Y-46283333D01* +X164754819Y-46283333D02* +X164754819Y-46378571D01* +X164754819Y-46378571D02* +X164707200Y-46521428D01* +X164707200Y-46521428D02* +X164611961Y-46616666D01* +X164611961Y-46616666D02* +X164516723Y-46664285D01* +X164516723Y-46664285D02* +X164326247Y-46711904D01* +X164326247Y-46711904D02* +X164183390Y-46711904D01* +X164183390Y-46711904D02* +X163992914Y-46664285D01* +X163992914Y-46664285D02* +X163897676Y-46616666D01* +X163897676Y-46616666D02* +X163802438Y-46521428D01* +X163802438Y-46521428D02* +X163754819Y-46378571D01* +X163754819Y-46378571D02* +X163754819Y-46283333D01* +X163754819Y-46283333D02* +X163802438Y-46140476D01* +X163802438Y-46140476D02* +X163850057Y-46092857D01* +X163850057Y-45711904D02* +X163802438Y-45664285D01* +X163802438Y-45664285D02* +X163754819Y-45569047D01* +X163754819Y-45569047D02* +X163754819Y-45330952D01* +X163754819Y-45330952D02* +X163802438Y-45235714D01* +X163802438Y-45235714D02* +X163850057Y-45188095D01* +X163850057Y-45188095D02* +X163945295Y-45140476D01* +X163945295Y-45140476D02* +X164040533Y-45140476D01* +X164040533Y-45140476D02* +X164183390Y-45188095D01* +X164183390Y-45188095D02* +X164754819Y-45759523D01* +X164754819Y-45759523D02* +X164754819Y-45140476D01* +X163850057Y-44759523D02* +X163802438Y-44711904D01* +X163802438Y-44711904D02* +X163754819Y-44616666D01* +X163754819Y-44616666D02* +X163754819Y-44378571D01* +X163754819Y-44378571D02* +X163802438Y-44283333D01* +X163802438Y-44283333D02* +X163850057Y-44235714D01* +X163850057Y-44235714D02* +X163945295Y-44188095D01* +X163945295Y-44188095D02* +X164040533Y-44188095D01* +X164040533Y-44188095D02* +X164183390Y-44235714D01* +X164183390Y-44235714D02* +X164754819Y-44807142D01* +X164754819Y-44807142D02* +X164754819Y-44188095D01* +X178873792Y-106347919D02* +X178540459Y-105871728D01* +X178302364Y-106347919D02* +X178302364Y-105347919D01* +X178302364Y-105347919D02* +X178683316Y-105347919D01* +X178683316Y-105347919D02* +X178778554Y-105395538D01* +X178778554Y-105395538D02* +X178826173Y-105443157D01* +X178826173Y-105443157D02* +X178873792Y-105538395D01* +X178873792Y-105538395D02* +X178873792Y-105681252D01* +X178873792Y-105681252D02* +X178826173Y-105776490D01* +X178826173Y-105776490D02* +X178778554Y-105824109D01* +X178778554Y-105824109D02* +X178683316Y-105871728D01* +X178683316Y-105871728D02* +X178302364Y-105871728D01* +X179730935Y-105347919D02* +X179540459Y-105347919D01* +X179540459Y-105347919D02* +X179445221Y-105395538D01* +X179445221Y-105395538D02* +X179397602Y-105443157D01* +X179397602Y-105443157D02* +X179302364Y-105586014D01* +X179302364Y-105586014D02* +X179254745Y-105776490D01* +X179254745Y-105776490D02* +X179254745Y-106157442D01* +X179254745Y-106157442D02* +X179302364Y-106252680D01* +X179302364Y-106252680D02* +X179349983Y-106300300D01* +X179349983Y-106300300D02* +X179445221Y-106347919D01* +X179445221Y-106347919D02* +X179635697Y-106347919D01* +X179635697Y-106347919D02* +X179730935Y-106300300D01* +X179730935Y-106300300D02* +X179778554Y-106252680D01* +X179778554Y-106252680D02* +X179826173Y-106157442D01* +X179826173Y-106157442D02* +X179826173Y-105919347D01* +X179826173Y-105919347D02* +X179778554Y-105824109D01* +X179778554Y-105824109D02* +X179730935Y-105776490D01* +X179730935Y-105776490D02* +X179635697Y-105728871D01* +X179635697Y-105728871D02* +X179445221Y-105728871D01* +X179445221Y-105728871D02* +X179349983Y-105776490D01* +X179349983Y-105776490D02* +X179302364Y-105824109D01* +X179302364Y-105824109D02* +X179254745Y-105919347D01* +X180778554Y-106347919D02* +X180207126Y-106347919D01* +X180492840Y-106347919D02* +X180492840Y-105347919D01* +X180492840Y-105347919D02* +X180397602Y-105490776D01* +X180397602Y-105490776D02* +X180302364Y-105586014D01* +X180302364Y-105586014D02* +X180207126Y-105633633D01* +X160449819Y-125773809D02* +X159973628Y-126107142D01* +X160449819Y-126345237D02* +X159449819Y-126345237D01* +X159449819Y-126345237D02* +X159449819Y-125964285D01* +X159449819Y-125964285D02* +X159497438Y-125869047D01* +X159497438Y-125869047D02* +X159545057Y-125821428D01* +X159545057Y-125821428D02* +X159640295Y-125773809D01* +X159640295Y-125773809D02* +X159783152Y-125773809D01* +X159783152Y-125773809D02* +X159878390Y-125821428D01* +X159878390Y-125821428D02* +X159926009Y-125869047D01* +X159926009Y-125869047D02* +X159973628Y-125964285D01* +X159973628Y-125964285D02* +X159973628Y-126345237D01* +X160402200Y-124916666D02* +X160449819Y-125011904D01* +X160449819Y-125011904D02* +X160449819Y-125202380D01* +X160449819Y-125202380D02* +X160402200Y-125297618D01* +X160402200Y-125297618D02* +X160354580Y-125345237D01* +X160354580Y-125345237D02* +X160259342Y-125392856D01* +X160259342Y-125392856D02* +X159973628Y-125392856D01* +X159973628Y-125392856D02* +X159878390Y-125345237D01* +X159878390Y-125345237D02* +X159830771Y-125297618D01* +X159830771Y-125297618D02* +X159783152Y-125202380D01* +X159783152Y-125202380D02* +X159783152Y-125011904D01* +X159783152Y-125011904D02* +X159830771Y-124916666D01* +X160402200Y-124059523D02* +X160449819Y-124154761D01* +X160449819Y-124154761D02* +X160449819Y-124345237D01* +X160449819Y-124345237D02* +X160402200Y-124440475D01* +X160402200Y-124440475D02* +X160354580Y-124488094D01* +X160354580Y-124488094D02* +X160259342Y-124535713D01* +X160259342Y-124535713D02* +X159973628Y-124535713D01* +X159973628Y-124535713D02* +X159878390Y-124488094D01* +X159878390Y-124488094D02* +X159830771Y-124440475D01* +X159830771Y-124440475D02* +X159783152Y-124345237D01* +X159783152Y-124345237D02* +X159783152Y-124154761D01* +X159783152Y-124154761D02* +X159830771Y-124059523D01* +X160449819Y-123107142D02* +X160449819Y-123678570D01* +X160449819Y-123392856D02* +X159449819Y-123392856D01* +X159449819Y-123392856D02* +X159592676Y-123488094D01* +X159592676Y-123488094D02* +X159687914Y-123583332D01* +X159687914Y-123583332D02* +X159735533Y-123678570D01* +X163699983Y-58347919D02* +X163366650Y-57871728D01* +X163128555Y-58347919D02* +X163128555Y-57347919D01* +X163128555Y-57347919D02* +X163509507Y-57347919D01* +X163509507Y-57347919D02* +X163604745Y-57395538D01* +X163604745Y-57395538D02* +X163652364Y-57443157D01* +X163652364Y-57443157D02* +X163699983Y-57538395D01* +X163699983Y-57538395D02* +X163699983Y-57681252D01* +X163699983Y-57681252D02* +X163652364Y-57776490D01* +X163652364Y-57776490D02* +X163604745Y-57824109D01* +X163604745Y-57824109D02* +X163509507Y-57871728D01* +X163509507Y-57871728D02* +X163128555Y-57871728D01* +X164652364Y-58347919D02* +X164080936Y-58347919D01* +X164366650Y-58347919D02* +X164366650Y-57347919D01* +X164366650Y-57347919D02* +X164271412Y-57490776D01* +X164271412Y-57490776D02* +X164176174Y-57586014D01* +X164176174Y-57586014D02* +X164080936Y-57633633D01* +X101203555Y-43227919D02* +X101203555Y-42227919D01* +X101203555Y-42227919D02* +X101584507Y-42227919D01* +X101584507Y-42227919D02* +X101679745Y-42275538D01* +X101679745Y-42275538D02* +X101727364Y-42323157D01* +X101727364Y-42323157D02* +X101774983Y-42418395D01* +X101774983Y-42418395D02* +X101774983Y-42561252D01* +X101774983Y-42561252D02* +X101727364Y-42656490D01* +X101727364Y-42656490D02* +X101679745Y-42704109D01* +X101679745Y-42704109D02* +X101584507Y-42751728D01* +X101584507Y-42751728D02* +X101203555Y-42751728D01* +X102679745Y-42227919D02* +X102203555Y-42227919D01* +X102203555Y-42227919D02* +X102155936Y-42704109D01* +X102155936Y-42704109D02* +X102203555Y-42656490D01* +X102203555Y-42656490D02* +X102298793Y-42608871D01* +X102298793Y-42608871D02* +X102536888Y-42608871D01* +X102536888Y-42608871D02* +X102632126Y-42656490D01* +X102632126Y-42656490D02* +X102679745Y-42704109D01* +X102679745Y-42704109D02* +X102727364Y-42799347D01* +X102727364Y-42799347D02* +X102727364Y-43037442D01* +X102727364Y-43037442D02* +X102679745Y-43132680D01* +X102679745Y-43132680D02* +X102632126Y-43180300D01* +X102632126Y-43180300D02* +X102536888Y-43227919D01* +X102536888Y-43227919D02* +X102298793Y-43227919D01* +X102298793Y-43227919D02* +X102203555Y-43180300D01* +X102203555Y-43180300D02* +X102155936Y-43132680D01* +X201016055Y-43127919D02* +X201016055Y-42127919D01* +X201016055Y-42127919D02* +X201254150Y-42127919D01* +X201254150Y-42127919D02* +X201397007Y-42175538D01* +X201397007Y-42175538D02* +X201492245Y-42270776D01* +X201492245Y-42270776D02* +X201539864Y-42366014D01* +X201539864Y-42366014D02* +X201587483Y-42556490D01* +X201587483Y-42556490D02* +X201587483Y-42699347D01* +X201587483Y-42699347D02* +X201539864Y-42889823D01* +X201539864Y-42889823D02* +X201492245Y-42985061D01* +X201492245Y-42985061D02* +X201397007Y-43080300D01* +X201397007Y-43080300D02* +X201254150Y-43127919D01* +X201254150Y-43127919D02* +X201016055Y-43127919D01* +X202349388Y-42604109D02* +X202492245Y-42651728D01* +X202492245Y-42651728D02* +X202539864Y-42699347D01* +X202539864Y-42699347D02* +X202587483Y-42794585D01* +X202587483Y-42794585D02* +X202587483Y-42937442D01* +X202587483Y-42937442D02* +X202539864Y-43032680D01* +X202539864Y-43032680D02* +X202492245Y-43080300D01* +X202492245Y-43080300D02* +X202397007Y-43127919D01* +X202397007Y-43127919D02* +X202016055Y-43127919D01* +X202016055Y-43127919D02* +X202016055Y-42127919D01* +X202016055Y-42127919D02* +X202349388Y-42127919D01* +X202349388Y-42127919D02* +X202444626Y-42175538D01* +X202444626Y-42175538D02* +X202492245Y-42223157D01* +X202492245Y-42223157D02* +X202539864Y-42318395D01* +X202539864Y-42318395D02* +X202539864Y-42413633D01* +X202539864Y-42413633D02* +X202492245Y-42508871D01* +X202492245Y-42508871D02* +X202444626Y-42556490D01* +X202444626Y-42556490D02* +X202349388Y-42604109D01* +X202349388Y-42604109D02* +X202016055Y-42604109D01* +X202920817Y-42127919D02* +X203539864Y-42127919D01* +X203539864Y-42127919D02* +X203206531Y-42508871D01* +X203206531Y-42508871D02* +X203349388Y-42508871D01* +X203349388Y-42508871D02* +X203444626Y-42556490D01* +X203444626Y-42556490D02* +X203492245Y-42604109D01* +X203492245Y-42604109D02* +X203539864Y-42699347D01* +X203539864Y-42699347D02* +X203539864Y-42937442D01* +X203539864Y-42937442D02* +X203492245Y-43032680D01* +X203492245Y-43032680D02* +X203444626Y-43080300D01* +X203444626Y-43080300D02* +X203349388Y-43127919D01* +X203349388Y-43127919D02* +X203063674Y-43127919D01* +X203063674Y-43127919D02* +X202968436Y-43080300D01* +X202968436Y-43080300D02* +X202920817Y-43032680D01* +X200731230Y-103915957D02* +X200778850Y-103963576D01* +X200778850Y-103963576D02* +X200826469Y-104106433D01* +X200826469Y-104106433D02* +X200826469Y-104201671D01* +X200826469Y-104201671D02* +X200778850Y-104344528D01* +X200778850Y-104344528D02* +X200683611Y-104439766D01* +X200683611Y-104439766D02* +X200588373Y-104487385D01* +X200588373Y-104487385D02* +X200397897Y-104535004D01* +X200397897Y-104535004D02* +X200255040Y-104535004D01* +X200255040Y-104535004D02* +X200064564Y-104487385D01* +X200064564Y-104487385D02* +X199969326Y-104439766D01* +X199969326Y-104439766D02* +X199874088Y-104344528D01* +X199874088Y-104344528D02* +X199826469Y-104201671D01* +X199826469Y-104201671D02* +X199826469Y-104106433D01* +X199826469Y-104106433D02* +X199874088Y-103963576D01* +X199874088Y-103963576D02* +X199921707Y-103915957D01* +X200159802Y-103058814D02* +X200826469Y-103058814D01* +X199778850Y-103296909D02* +X200493135Y-103535004D01* +X200493135Y-103535004D02* +X200493135Y-102915957D01* +X200826469Y-102011195D02* +X200826469Y-102582623D01* +X200826469Y-102296909D02* +X199826469Y-102296909D01* +X199826469Y-102296909D02* +X199969326Y-102392147D01* +X199969326Y-102392147D02* +X200064564Y-102487385D01* +X200064564Y-102487385D02* +X200112183Y-102582623D01* +X101223792Y-106347919D02* +X100890459Y-105871728D01* +X100652364Y-106347919D02* +X100652364Y-105347919D01* +X100652364Y-105347919D02* +X101033316Y-105347919D01* +X101033316Y-105347919D02* +X101128554Y-105395538D01* +X101128554Y-105395538D02* +X101176173Y-105443157D01* +X101176173Y-105443157D02* +X101223792Y-105538395D01* +X101223792Y-105538395D02* +X101223792Y-105681252D01* +X101223792Y-105681252D02* +X101176173Y-105776490D01* +X101176173Y-105776490D02* +X101128554Y-105824109D01* +X101128554Y-105824109D02* +X101033316Y-105871728D01* +X101033316Y-105871728D02* +X100652364Y-105871728D01* +X102128554Y-105347919D02* +X101652364Y-105347919D01* +X101652364Y-105347919D02* +X101604745Y-105824109D01* +X101604745Y-105824109D02* +X101652364Y-105776490D01* +X101652364Y-105776490D02* +X101747602Y-105728871D01* +X101747602Y-105728871D02* +X101985697Y-105728871D01* +X101985697Y-105728871D02* +X102080935Y-105776490D01* +X102080935Y-105776490D02* +X102128554Y-105824109D01* +X102128554Y-105824109D02* +X102176173Y-105919347D01* +X102176173Y-105919347D02* +X102176173Y-106157442D01* +X102176173Y-106157442D02* +X102128554Y-106252680D01* +X102128554Y-106252680D02* +X102080935Y-106300300D01* +X102080935Y-106300300D02* +X101985697Y-106347919D01* +X101985697Y-106347919D02* +X101747602Y-106347919D01* +X101747602Y-106347919D02* +X101652364Y-106300300D01* +X101652364Y-106300300D02* +X101604745Y-106252680D01* +X103080935Y-105347919D02* +X102604745Y-105347919D01* +X102604745Y-105347919D02* +X102557126Y-105824109D01* +X102557126Y-105824109D02* +X102604745Y-105776490D01* +X102604745Y-105776490D02* +X102699983Y-105728871D01* +X102699983Y-105728871D02* +X102938078Y-105728871D01* +X102938078Y-105728871D02* +X103033316Y-105776490D01* +X103033316Y-105776490D02* +X103080935Y-105824109D01* +X103080935Y-105824109D02* +X103128554Y-105919347D01* +X103128554Y-105919347D02* +X103128554Y-106157442D01* +X103128554Y-106157442D02* +X103080935Y-106252680D01* +X103080935Y-106252680D02* +X103033316Y-106300300D01* +X103033316Y-106300300D02* +X102938078Y-106347919D01* +X102938078Y-106347919D02* +X102699983Y-106347919D01* +X102699983Y-106347919D02* +X102604745Y-106300300D01* +X102604745Y-106300300D02* +X102557126Y-106252680D01* +X94583316Y-111347919D02* +X94249983Y-110871728D01* +X94011888Y-111347919D02* +X94011888Y-110347919D01* +X94011888Y-110347919D02* +X94392840Y-110347919D01* +X94392840Y-110347919D02* +X94488078Y-110395538D01* +X94488078Y-110395538D02* +X94535697Y-110443157D01* +X94535697Y-110443157D02* +X94583316Y-110538395D01* +X94583316Y-110538395D02* +X94583316Y-110681252D01* +X94583316Y-110681252D02* +X94535697Y-110776490D01* +X94535697Y-110776490D02* +X94488078Y-110824109D01* +X94488078Y-110824109D02* +X94392840Y-110871728D01* +X94392840Y-110871728D02* +X94011888Y-110871728D01* +X95154745Y-111347919D02* +X95059507Y-111300300D01* +X95059507Y-111300300D02* +X95011888Y-111205061D01* +X95011888Y-111205061D02* +X95011888Y-110347919D01* +X95916650Y-111300300D02* +X95821412Y-111347919D01* +X95821412Y-111347919D02* +X95630936Y-111347919D01* +X95630936Y-111347919D02* +X95535698Y-111300300D01* +X95535698Y-111300300D02* +X95488079Y-111205061D01* +X95488079Y-111205061D02* +X95488079Y-110824109D01* +X95488079Y-110824109D02* +X95535698Y-110728871D01* +X95535698Y-110728871D02* +X95630936Y-110681252D01* +X95630936Y-110681252D02* +X95821412Y-110681252D01* +X95821412Y-110681252D02* +X95916650Y-110728871D01* +X95916650Y-110728871D02* +X95964269Y-110824109D01* +X95964269Y-110824109D02* +X95964269Y-110919347D01* +X95964269Y-110919347D02* +X95488079Y-111014585D01* +X96821412Y-111347919D02* +X96821412Y-110347919D01* +X96821412Y-111300300D02* +X96726174Y-111347919D01* +X96726174Y-111347919D02* +X96535698Y-111347919D01* +X96535698Y-111347919D02* +X96440460Y-111300300D01* +X96440460Y-111300300D02* +X96392841Y-111252680D01* +X96392841Y-111252680D02* +X96345222Y-111157442D01* +X96345222Y-111157442D02* +X96345222Y-110871728D01* +X96345222Y-110871728D02* +X96392841Y-110776490D01* +X96392841Y-110776490D02* +X96440460Y-110728871D01* +X96440460Y-110728871D02* +X96535698Y-110681252D01* +X96535698Y-110681252D02* +X96726174Y-110681252D01* +X96726174Y-110681252D02* +X96821412Y-110728871D01* +X140558316Y-97477919D02* +X140558316Y-98192204D01* +X140558316Y-98192204D02* +X140510697Y-98335061D01* +X140510697Y-98335061D02* +X140415459Y-98430300D01* +X140415459Y-98430300D02* +X140272602Y-98477919D01* +X140272602Y-98477919D02* +X140177364Y-98477919D01* +X141034507Y-98477919D02* +X141034507Y-97477919D01* +X141034507Y-97477919D02* +X141415459Y-97477919D01* +X141415459Y-97477919D02* +X141510697Y-97525538D01* +X141510697Y-97525538D02* +X141558316Y-97573157D01* +X141558316Y-97573157D02* +X141605935Y-97668395D01* +X141605935Y-97668395D02* +X141605935Y-97811252D01* +X141605935Y-97811252D02* +X141558316Y-97906490D01* +X141558316Y-97906490D02* +X141510697Y-97954109D01* +X141510697Y-97954109D02* +X141415459Y-98001728D01* +X141415459Y-98001728D02* +X141034507Y-98001728D01* +X142463078Y-97811252D02* +X142463078Y-98477919D01* +X142224983Y-97430300D02* +X141986888Y-98144585D01* +X141986888Y-98144585D02* +X142605935Y-98144585D01* +X97204819Y-94897619D02* +X96728628Y-95230952D01* +X97204819Y-95469047D02* +X96204819Y-95469047D01* +X96204819Y-95469047D02* +X96204819Y-95088095D01* +X96204819Y-95088095D02* +X96252438Y-94992857D01* +X96252438Y-94992857D02* +X96300057Y-94945238D01* +X96300057Y-94945238D02* +X96395295Y-94897619D01* +X96395295Y-94897619D02* +X96538152Y-94897619D01* +X96538152Y-94897619D02* +X96633390Y-94945238D01* +X96633390Y-94945238D02* +X96681009Y-94992857D01* +X96681009Y-94992857D02* +X96728628Y-95088095D01* +X96728628Y-95088095D02* +X96728628Y-95469047D01* +X96538152Y-94040476D02* +X97347676Y-94040476D01* +X97347676Y-94040476D02* +X97442914Y-94088095D01* +X97442914Y-94088095D02* +X97490533Y-94135714D01* +X97490533Y-94135714D02* +X97538152Y-94230952D01* +X97538152Y-94230952D02* +X97538152Y-94373809D01* +X97538152Y-94373809D02* +X97490533Y-94469047D01* +X97157200Y-94040476D02* +X97204819Y-94135714D01* +X97204819Y-94135714D02* +X97204819Y-94326190D01* +X97204819Y-94326190D02* +X97157200Y-94421428D01* +X97157200Y-94421428D02* +X97109580Y-94469047D01* +X97109580Y-94469047D02* +X97014342Y-94516666D01* +X97014342Y-94516666D02* +X96728628Y-94516666D01* +X96728628Y-94516666D02* +X96633390Y-94469047D01* +X96633390Y-94469047D02* +X96585771Y-94421428D01* +X96585771Y-94421428D02* +X96538152Y-94326190D01* +X96538152Y-94326190D02* +X96538152Y-94135714D01* +X96538152Y-94135714D02* +X96585771Y-94040476D01* +X97157200Y-93611904D02* +X97204819Y-93516666D01* +X97204819Y-93516666D02* +X97204819Y-93326190D01* +X97204819Y-93326190D02* +X97157200Y-93230952D01* +X97157200Y-93230952D02* +X97061961Y-93183333D01* +X97061961Y-93183333D02* +X97014342Y-93183333D01* +X97014342Y-93183333D02* +X96919104Y-93230952D01* +X96919104Y-93230952D02* +X96871485Y-93326190D01* +X96871485Y-93326190D02* +X96871485Y-93469047D01* +X96871485Y-93469047D02* +X96823866Y-93564285D01* +X96823866Y-93564285D02* +X96728628Y-93611904D01* +X96728628Y-93611904D02* +X96681009Y-93611904D01* +X96681009Y-93611904D02* +X96585771Y-93564285D01* +X96585771Y-93564285D02* +X96538152Y-93469047D01* +X96538152Y-93469047D02* +X96538152Y-93326190D01* +X96538152Y-93326190D02* +X96585771Y-93230952D01* +X207071469Y-70311194D02* +X206071469Y-70311194D01* +X206071469Y-70311194D02* +X206071469Y-69930242D01* +X206071469Y-69930242D02* +X206119088Y-69835004D01* +X206119088Y-69835004D02* +X206166707Y-69787385D01* +X206166707Y-69787385D02* +X206261945Y-69739766D01* +X206261945Y-69739766D02* +X206404802Y-69739766D01* +X206404802Y-69739766D02* +X206500040Y-69787385D01* +X206500040Y-69787385D02* +X206547659Y-69835004D01* +X206547659Y-69835004D02* +X206595278Y-69930242D01* +X206595278Y-69930242D02* +X206595278Y-70311194D01* +X206500040Y-69168337D02* +X206452421Y-69263575D01* +X206452421Y-69263575D02* +X206404802Y-69311194D01* +X206404802Y-69311194D02* +X206309564Y-69358813D01* +X206309564Y-69358813D02* +X206261945Y-69358813D01* +X206261945Y-69358813D02* +X206166707Y-69311194D01* +X206166707Y-69311194D02* +X206119088Y-69263575D01* +X206119088Y-69263575D02* +X206071469Y-69168337D01* +X206071469Y-69168337D02* +X206071469Y-68977861D01* +X206071469Y-68977861D02* +X206119088Y-68882623D01* +X206119088Y-68882623D02* +X206166707Y-68835004D01* +X206166707Y-68835004D02* +X206261945Y-68787385D01* +X206261945Y-68787385D02* +X206309564Y-68787385D01* +X206309564Y-68787385D02* +X206404802Y-68835004D01* +X206404802Y-68835004D02* +X206452421Y-68882623D01* +X206452421Y-68882623D02* +X206500040Y-68977861D01* +X206500040Y-68977861D02* +X206500040Y-69168337D01* +X206500040Y-69168337D02* +X206547659Y-69263575D01* +X206547659Y-69263575D02* +X206595278Y-69311194D01* +X206595278Y-69311194D02* +X206690516Y-69358813D01* +X206690516Y-69358813D02* +X206880992Y-69358813D01* +X206880992Y-69358813D02* +X206976230Y-69311194D01* +X206976230Y-69311194D02* +X207023850Y-69263575D01* +X207023850Y-69263575D02* +X207071469Y-69168337D01* +X207071469Y-69168337D02* +X207071469Y-68977861D01* +X207071469Y-68977861D02* +X207023850Y-68882623D01* +X207023850Y-68882623D02* +X206976230Y-68835004D01* +X206976230Y-68835004D02* +X206880992Y-68787385D01* +X206880992Y-68787385D02* +X206690516Y-68787385D01* +X206690516Y-68787385D02* +X206595278Y-68835004D01* +X206595278Y-68835004D02* +X206547659Y-68882623D01* +X206547659Y-68882623D02* +X206500040Y-68977861D01* +X177548792Y-63847919D02* +X177215459Y-63371728D01* +X176977364Y-63847919D02* +X176977364Y-62847919D01* +X176977364Y-62847919D02* +X177358316Y-62847919D01* +X177358316Y-62847919D02* +X177453554Y-62895538D01* +X177453554Y-62895538D02* +X177501173Y-62943157D01* +X177501173Y-62943157D02* +X177548792Y-63038395D01* +X177548792Y-63038395D02* +X177548792Y-63181252D01* +X177548792Y-63181252D02* +X177501173Y-63276490D01* +X177501173Y-63276490D02* +X177453554Y-63324109D01* +X177453554Y-63324109D02* +X177358316Y-63371728D01* +X177358316Y-63371728D02* +X176977364Y-63371728D01* +X178405935Y-63181252D02* +X178405935Y-63847919D01* +X178167840Y-62800300D02* +X177929745Y-63514585D01* +X177929745Y-63514585D02* +X178548792Y-63514585D01* +X179453554Y-63847919D02* +X178882126Y-63847919D01* +X179167840Y-63847919D02* +X179167840Y-62847919D01* +X179167840Y-62847919D02* +X179072602Y-62990776D01* +X179072602Y-62990776D02* +X178977364Y-63086014D01* +X178977364Y-63086014D02* +X178882126Y-63133633D01* +X205016055Y-43127919D02* +X205016055Y-42127919D01* +X205016055Y-42127919D02* +X205254150Y-42127919D01* +X205254150Y-42127919D02* +X205397007Y-42175538D01* +X205397007Y-42175538D02* +X205492245Y-42270776D01* +X205492245Y-42270776D02* +X205539864Y-42366014D01* +X205539864Y-42366014D02* +X205587483Y-42556490D01* +X205587483Y-42556490D02* +X205587483Y-42699347D01* +X205587483Y-42699347D02* +X205539864Y-42889823D01* +X205539864Y-42889823D02* +X205492245Y-42985061D01* +X205492245Y-42985061D02* +X205397007Y-43080300D01* +X205397007Y-43080300D02* +X205254150Y-43127919D01* +X205254150Y-43127919D02* +X205016055Y-43127919D01* +X206349388Y-42604109D02* +X206492245Y-42651728D01* +X206492245Y-42651728D02* +X206539864Y-42699347D01* +X206539864Y-42699347D02* +X206587483Y-42794585D01* +X206587483Y-42794585D02* +X206587483Y-42937442D01* +X206587483Y-42937442D02* +X206539864Y-43032680D01* +X206539864Y-43032680D02* +X206492245Y-43080300D01* +X206492245Y-43080300D02* +X206397007Y-43127919D01* +X206397007Y-43127919D02* +X206016055Y-43127919D01* +X206016055Y-43127919D02* +X206016055Y-42127919D01* +X206016055Y-42127919D02* +X206349388Y-42127919D01* +X206349388Y-42127919D02* +X206444626Y-42175538D01* +X206444626Y-42175538D02* +X206492245Y-42223157D01* +X206492245Y-42223157D02* +X206539864Y-42318395D01* +X206539864Y-42318395D02* +X206539864Y-42413633D01* +X206539864Y-42413633D02* +X206492245Y-42508871D01* +X206492245Y-42508871D02* +X206444626Y-42556490D01* +X206444626Y-42556490D02* +X206349388Y-42604109D01* +X206349388Y-42604109D02* +X206016055Y-42604109D01* +X207444626Y-42461252D02* +X207444626Y-43127919D01* +X207206531Y-42080300D02* +X206968436Y-42794585D01* +X206968436Y-42794585D02* +X207587483Y-42794585D01* +X197587483Y-47347919D02* +X197254150Y-46871728D01* +X197016055Y-47347919D02* +X197016055Y-46347919D01* +X197016055Y-46347919D02* +X197397007Y-46347919D01* +X197397007Y-46347919D02* +X197492245Y-46395538D01* +X197492245Y-46395538D02* +X197539864Y-46443157D01* +X197539864Y-46443157D02* +X197587483Y-46538395D01* +X197587483Y-46538395D02* +X197587483Y-46681252D01* +X197587483Y-46681252D02* +X197539864Y-46776490D01* +X197539864Y-46776490D02* +X197492245Y-46824109D01* +X197492245Y-46824109D02* +X197397007Y-46871728D01* +X197397007Y-46871728D02* +X197016055Y-46871728D01* +X198349388Y-46824109D02* +X198492245Y-46871728D01* +X198492245Y-46871728D02* +X198539864Y-46919347D01* +X198539864Y-46919347D02* +X198587483Y-47014585D01* +X198587483Y-47014585D02* +X198587483Y-47157442D01* +X198587483Y-47157442D02* +X198539864Y-47252680D01* +X198539864Y-47252680D02* +X198492245Y-47300300D01* +X198492245Y-47300300D02* +X198397007Y-47347919D01* +X198397007Y-47347919D02* +X198016055Y-47347919D01* +X198016055Y-47347919D02* +X198016055Y-46347919D01* +X198016055Y-46347919D02* +X198349388Y-46347919D01* +X198349388Y-46347919D02* +X198444626Y-46395538D01* +X198444626Y-46395538D02* +X198492245Y-46443157D01* +X198492245Y-46443157D02* +X198539864Y-46538395D01* +X198539864Y-46538395D02* +X198539864Y-46633633D01* +X198539864Y-46633633D02* +X198492245Y-46728871D01* +X198492245Y-46728871D02* +X198444626Y-46776490D01* +X198444626Y-46776490D02* +X198349388Y-46824109D01* +X198349388Y-46824109D02* +X198016055Y-46824109D01* +X198968436Y-46443157D02* +X199016055Y-46395538D01* +X199016055Y-46395538D02* +X199111293Y-46347919D01* +X199111293Y-46347919D02* +X199349388Y-46347919D01* +X199349388Y-46347919D02* +X199444626Y-46395538D01* +X199444626Y-46395538D02* +X199492245Y-46443157D01* +X199492245Y-46443157D02* +X199539864Y-46538395D01* +X199539864Y-46538395D02* +X199539864Y-46633633D01* +X199539864Y-46633633D02* +X199492245Y-46776490D01* +X199492245Y-46776490D02* +X198920817Y-47347919D01* +X198920817Y-47347919D02* +X199539864Y-47347919D01* +X164424819Y-125773809D02* +X163948628Y-126107142D01* +X164424819Y-126345237D02* +X163424819Y-126345237D01* +X163424819Y-126345237D02* +X163424819Y-125964285D01* +X163424819Y-125964285D02* +X163472438Y-125869047D01* +X163472438Y-125869047D02* +X163520057Y-125821428D01* +X163520057Y-125821428D02* +X163615295Y-125773809D01* +X163615295Y-125773809D02* +X163758152Y-125773809D01* +X163758152Y-125773809D02* +X163853390Y-125821428D01* +X163853390Y-125821428D02* +X163901009Y-125869047D01* +X163901009Y-125869047D02* +X163948628Y-125964285D01* +X163948628Y-125964285D02* +X163948628Y-126345237D01* +X164377200Y-124916666D02* +X164424819Y-125011904D01* +X164424819Y-125011904D02* +X164424819Y-125202380D01* +X164424819Y-125202380D02* +X164377200Y-125297618D01* +X164377200Y-125297618D02* +X164329580Y-125345237D01* +X164329580Y-125345237D02* +X164234342Y-125392856D01* +X164234342Y-125392856D02* +X163948628Y-125392856D01* +X163948628Y-125392856D02* +X163853390Y-125345237D01* +X163853390Y-125345237D02* +X163805771Y-125297618D01* +X163805771Y-125297618D02* +X163758152Y-125202380D01* +X163758152Y-125202380D02* +X163758152Y-125011904D01* +X163758152Y-125011904D02* +X163805771Y-124916666D01* +X164377200Y-124059523D02* +X164424819Y-124154761D01* +X164424819Y-124154761D02* +X164424819Y-124345237D01* +X164424819Y-124345237D02* +X164377200Y-124440475D01* +X164377200Y-124440475D02* +X164329580Y-124488094D01* +X164329580Y-124488094D02* +X164234342Y-124535713D01* +X164234342Y-124535713D02* +X163948628Y-124535713D01* +X163948628Y-124535713D02* +X163853390Y-124488094D01* +X163853390Y-124488094D02* +X163805771Y-124440475D01* +X163805771Y-124440475D02* +X163758152Y-124345237D01* +X163758152Y-124345237D02* +X163758152Y-124154761D01* +X163758152Y-124154761D02* +X163805771Y-124059523D01* +X163520057Y-123678570D02* +X163472438Y-123630951D01* +X163472438Y-123630951D02* +X163424819Y-123535713D01* +X163424819Y-123535713D02* +X163424819Y-123297618D01* +X163424819Y-123297618D02* +X163472438Y-123202380D01* +X163472438Y-123202380D02* +X163520057Y-123154761D01* +X163520057Y-123154761D02* +X163615295Y-123107142D01* +X163615295Y-123107142D02* +X163710533Y-123107142D01* +X163710533Y-123107142D02* +X163853390Y-123154761D01* +X163853390Y-123154761D02* +X164424819Y-123726189D01* +X164424819Y-123726189D02* +X164424819Y-123107142D01* +X99411905Y-118754819D02* +X99411905Y-117754819D01* +X99411905Y-117754819D02* +X99650000Y-117754819D01* +X99650000Y-117754819D02* +X99792857Y-117802438D01* +X99792857Y-117802438D02* +X99888095Y-117897676D01* +X99888095Y-117897676D02* +X99935714Y-117992914D01* +X99935714Y-117992914D02* +X99983333Y-118183390D01* +X99983333Y-118183390D02* +X99983333Y-118326247D01* +X99983333Y-118326247D02* +X99935714Y-118516723D01* +X99935714Y-118516723D02* +X99888095Y-118611961D01* +X99888095Y-118611961D02* +X99792857Y-118707200D01* +X99792857Y-118707200D02* +X99650000Y-118754819D01* +X99650000Y-118754819D02* +X99411905Y-118754819D01* +X100935714Y-118754819D02* +X100364286Y-118754819D01* +X100650000Y-118754819D02* +X100650000Y-117754819D01* +X100650000Y-117754819D02* +X100554762Y-117897676D01* +X100554762Y-117897676D02* +X100459524Y-117992914D01* +X100459524Y-117992914D02* +X100364286Y-118040533D01* +X100438078Y-101347919D02* +X100104745Y-100871728D01* +X99866650Y-101347919D02* +X99866650Y-100347919D01* +X99866650Y-100347919D02* +X100247602Y-100347919D01* +X100247602Y-100347919D02* +X100342840Y-100395538D01* +X100342840Y-100395538D02* +X100390459Y-100443157D01* +X100390459Y-100443157D02* +X100438078Y-100538395D01* +X100438078Y-100538395D02* +X100438078Y-100681252D01* +X100438078Y-100681252D02* +X100390459Y-100776490D01* +X100390459Y-100776490D02* +X100342840Y-100824109D01* +X100342840Y-100824109D02* +X100247602Y-100871728D01* +X100247602Y-100871728D02* +X99866650Y-100871728D01* +X100723793Y-100681252D02* +X101104745Y-100681252D01* +X100866650Y-100347919D02* +X100866650Y-101205061D01* +X100866650Y-101205061D02* +X100914269Y-101300300D01* +X100914269Y-101300300D02* +X101009507Y-101347919D01* +X101009507Y-101347919D02* +X101104745Y-101347919D01* +X101438079Y-100681252D02* +X101438079Y-101681252D01* +X101438079Y-100728871D02* +X101533317Y-100681252D01* +X101533317Y-100681252D02* +X101723793Y-100681252D01* +X101723793Y-100681252D02* +X101819031Y-100728871D01* +X101819031Y-100728871D02* +X101866650Y-100776490D01* +X101866650Y-100776490D02* +X101914269Y-100871728D01* +X101914269Y-100871728D02* +X101914269Y-101157442D01* +X101914269Y-101157442D02* +X101866650Y-101252680D01* +X101866650Y-101252680D02* +X101819031Y-101300300D01* +X101819031Y-101300300D02* +X101723793Y-101347919D01* +X101723793Y-101347919D02* +X101533317Y-101347919D01* +X101533317Y-101347919D02* +X101438079Y-101300300D01* +X164708316Y-77977919D02* +X164708316Y-78692204D01* +X164708316Y-78692204D02* +X164660697Y-78835061D01* +X164660697Y-78835061D02* +X164565459Y-78930300D01* +X164565459Y-78930300D02* +X164422602Y-78977919D01* +X164422602Y-78977919D02* +X164327364Y-78977919D01* +X165184507Y-78977919D02* +X165184507Y-77977919D01* +X165184507Y-77977919D02* +X165565459Y-77977919D01* +X165565459Y-77977919D02* +X165660697Y-78025538D01* +X165660697Y-78025538D02* +X165708316Y-78073157D01* +X165708316Y-78073157D02* +X165755935Y-78168395D01* +X165755935Y-78168395D02* +X165755935Y-78311252D01* +X165755935Y-78311252D02* +X165708316Y-78406490D01* +X165708316Y-78406490D02* +X165660697Y-78454109D01* +X165660697Y-78454109D02* +X165565459Y-78501728D01* +X165565459Y-78501728D02* +X165184507Y-78501728D01* +X166708316Y-78977919D02* +X166136888Y-78977919D01* +X166422602Y-78977919D02* +X166422602Y-77977919D01* +X166422602Y-77977919D02* +X166327364Y-78120776D01* +X166327364Y-78120776D02* +X166232126Y-78216014D01* +X166232126Y-78216014D02* +X166136888Y-78263633D01* +X124273792Y-111347919D02* +X123940459Y-110871728D01* +X123702364Y-111347919D02* +X123702364Y-110347919D01* +X123702364Y-110347919D02* +X124083316Y-110347919D01* +X124083316Y-110347919D02* +X124178554Y-110395538D01* +X124178554Y-110395538D02* +X124226173Y-110443157D01* +X124226173Y-110443157D02* +X124273792Y-110538395D01* +X124273792Y-110538395D02* +X124273792Y-110681252D01* +X124273792Y-110681252D02* +X124226173Y-110776490D01* +X124226173Y-110776490D02* +X124178554Y-110824109D01* +X124178554Y-110824109D02* +X124083316Y-110871728D01* +X124083316Y-110871728D02* +X123702364Y-110871728D01* +X124607126Y-110347919D02* +X125226173Y-110347919D01* +X125226173Y-110347919D02* +X124892840Y-110728871D01* +X124892840Y-110728871D02* +X125035697Y-110728871D01* +X125035697Y-110728871D02* +X125130935Y-110776490D01* +X125130935Y-110776490D02* +X125178554Y-110824109D01* +X125178554Y-110824109D02* +X125226173Y-110919347D01* +X125226173Y-110919347D02* +X125226173Y-111157442D01* +X125226173Y-111157442D02* +X125178554Y-111252680D01* +X125178554Y-111252680D02* +X125130935Y-111300300D01* +X125130935Y-111300300D02* +X125035697Y-111347919D01* +X125035697Y-111347919D02* +X124749983Y-111347919D01* +X124749983Y-111347919D02* +X124654745Y-111300300D01* +X124654745Y-111300300D02* +X124607126Y-111252680D01* +X125845221Y-110347919D02* +X125940459Y-110347919D01* +X125940459Y-110347919D02* +X126035697Y-110395538D01* +X126035697Y-110395538D02* +X126083316Y-110443157D01* +X126083316Y-110443157D02* +X126130935Y-110538395D01* +X126130935Y-110538395D02* +X126178554Y-110728871D01* +X126178554Y-110728871D02* +X126178554Y-110966966D01* +X126178554Y-110966966D02* +X126130935Y-111157442D01* +X126130935Y-111157442D02* +X126083316Y-111252680D01* +X126083316Y-111252680D02* +X126035697Y-111300300D01* +X126035697Y-111300300D02* +X125940459Y-111347919D01* +X125940459Y-111347919D02* +X125845221Y-111347919D01* +X125845221Y-111347919D02* +X125749983Y-111300300D01* +X125749983Y-111300300D02* +X125702364Y-111252680D01* +X125702364Y-111252680D02* +X125654745Y-111157442D01* +X125654745Y-111157442D02* +X125607126Y-110966966D01* +X125607126Y-110966966D02* +X125607126Y-110728871D01* +X125607126Y-110728871D02* +X125654745Y-110538395D01* +X125654745Y-110538395D02* +X125702364Y-110443157D01* +X125702364Y-110443157D02* +X125749983Y-110395538D01* +X125749983Y-110395538D02* +X125845221Y-110347919D01* +X98574983Y-111347919D02* +X98241650Y-110871728D01* +X98003555Y-111347919D02* +X98003555Y-110347919D01* +X98003555Y-110347919D02* +X98384507Y-110347919D01* +X98384507Y-110347919D02* +X98479745Y-110395538D01* +X98479745Y-110395538D02* +X98527364Y-110443157D01* +X98527364Y-110443157D02* +X98574983Y-110538395D01* +X98574983Y-110538395D02* +X98574983Y-110681252D01* +X98574983Y-110681252D02* +X98527364Y-110776490D01* +X98527364Y-110776490D02* +X98479745Y-110824109D01* +X98479745Y-110824109D02* +X98384507Y-110871728D01* +X98384507Y-110871728D02* +X98003555Y-110871728D01* +X99432126Y-110347919D02* +X99241650Y-110347919D01* +X99241650Y-110347919D02* +X99146412Y-110395538D01* +X99146412Y-110395538D02* +X99098793Y-110443157D01* +X99098793Y-110443157D02* +X99003555Y-110586014D01* +X99003555Y-110586014D02* +X98955936Y-110776490D01* +X98955936Y-110776490D02* +X98955936Y-111157442D01* +X98955936Y-111157442D02* +X99003555Y-111252680D01* +X99003555Y-111252680D02* +X99051174Y-111300300D01* +X99051174Y-111300300D02* +X99146412Y-111347919D01* +X99146412Y-111347919D02* +X99336888Y-111347919D01* +X99336888Y-111347919D02* +X99432126Y-111300300D01* +X99432126Y-111300300D02* +X99479745Y-111252680D01* +X99479745Y-111252680D02* +X99527364Y-111157442D01* +X99527364Y-111157442D02* +X99527364Y-110919347D01* +X99527364Y-110919347D02* +X99479745Y-110824109D01* +X99479745Y-110824109D02* +X99432126Y-110776490D01* +X99432126Y-110776490D02* +X99336888Y-110728871D01* +X99336888Y-110728871D02* +X99146412Y-110728871D01* +X99146412Y-110728871D02* +X99051174Y-110776490D01* +X99051174Y-110776490D02* +X99003555Y-110824109D01* +X99003555Y-110824109D02* +X98955936Y-110919347D01* +X207096469Y-121287385D02* +X206096469Y-121287385D01* +X206096469Y-121287385D02* +X206096469Y-120906433D01* +X206096469Y-120906433D02* +X206144088Y-120811195D01* +X206144088Y-120811195D02* +X206191707Y-120763576D01* +X206191707Y-120763576D02* +X206286945Y-120715957D01* +X206286945Y-120715957D02* +X206429802Y-120715957D01* +X206429802Y-120715957D02* +X206525040Y-120763576D01* +X206525040Y-120763576D02* +X206572659Y-120811195D01* +X206572659Y-120811195D02* +X206620278Y-120906433D01* +X206620278Y-120906433D02* +X206620278Y-121287385D01* +X207096469Y-119763576D02* +X207096469Y-120335004D01* +X207096469Y-120049290D02* +X206096469Y-120049290D01* +X206096469Y-120049290D02* +X206239326Y-120144528D01* +X206239326Y-120144528D02* +X206334564Y-120239766D01* +X206334564Y-120239766D02* +X206382183Y-120335004D01* +X206191707Y-119382623D02* +X206144088Y-119335004D01* +X206144088Y-119335004D02* +X206096469Y-119239766D01* +X206096469Y-119239766D02* +X206096469Y-119001671D01* +X206096469Y-119001671D02* +X206144088Y-118906433D01* +X206144088Y-118906433D02* +X206191707Y-118858814D01* +X206191707Y-118858814D02* +X206286945Y-118811195D01* +X206286945Y-118811195D02* +X206382183Y-118811195D01* +X206382183Y-118811195D02* +X206525040Y-118858814D01* +X206525040Y-118858814D02* +X207096469Y-119430242D01* +X207096469Y-119430242D02* +X207096469Y-118811195D01* +X120023792Y-102382680D02* +X119976173Y-102430300D01* +X119976173Y-102430300D02* +X119833316Y-102477919D01* +X119833316Y-102477919D02* +X119738078Y-102477919D01* +X119738078Y-102477919D02* +X119595221Y-102430300D01* +X119595221Y-102430300D02* +X119499983Y-102335061D01* +X119499983Y-102335061D02* +X119452364Y-102239823D01* +X119452364Y-102239823D02* +X119404745Y-102049347D01* +X119404745Y-102049347D02* +X119404745Y-101906490D01* +X119404745Y-101906490D02* +X119452364Y-101716014D01* +X119452364Y-101716014D02* +X119499983Y-101620776D01* +X119499983Y-101620776D02* +X119595221Y-101525538D01* +X119595221Y-101525538D02* +X119738078Y-101477919D01* +X119738078Y-101477919D02* +X119833316Y-101477919D01* +X119833316Y-101477919D02* +X119976173Y-101525538D01* +X119976173Y-101525538D02* +X120023792Y-101573157D01* +X120357126Y-101477919D02* +X120976173Y-101477919D01* +X120976173Y-101477919D02* +X120642840Y-101858871D01* +X120642840Y-101858871D02* +X120785697Y-101858871D01* +X120785697Y-101858871D02* +X120880935Y-101906490D01* +X120880935Y-101906490D02* +X120928554Y-101954109D01* +X120928554Y-101954109D02* +X120976173Y-102049347D01* +X120976173Y-102049347D02* +X120976173Y-102287442D01* +X120976173Y-102287442D02* +X120928554Y-102382680D01* +X120928554Y-102382680D02* +X120880935Y-102430300D01* +X120880935Y-102430300D02* +X120785697Y-102477919D01* +X120785697Y-102477919D02* +X120499983Y-102477919D01* +X120499983Y-102477919D02* +X120404745Y-102430300D01* +X120404745Y-102430300D02* +X120357126Y-102382680D01* +X121357126Y-101573157D02* +X121404745Y-101525538D01* +X121404745Y-101525538D02* +X121499983Y-101477919D01* +X121499983Y-101477919D02* +X121738078Y-101477919D01* +X121738078Y-101477919D02* +X121833316Y-101525538D01* +X121833316Y-101525538D02* +X121880935Y-101573157D01* +X121880935Y-101573157D02* +X121928554Y-101668395D01* +X121928554Y-101668395D02* +X121928554Y-101763633D01* +X121928554Y-101763633D02* +X121880935Y-101906490D01* +X121880935Y-101906490D02* +X121309507Y-102477919D01* +X121309507Y-102477919D02* +X121928554Y-102477919D01* +X163816666Y-127079819D02* +X163816666Y-127794104D01* +X163816666Y-127794104D02* +X163769047Y-127936961D01* +X163769047Y-127936961D02* +X163673809Y-128032200D01* +X163673809Y-128032200D02* +X163530952Y-128079819D01* +X163530952Y-128079819D02* +X163435714Y-128079819D01* +X164340476Y-128079819D02* +X164530952Y-128079819D01* +X164530952Y-128079819D02* +X164626190Y-128032200D01* +X164626190Y-128032200D02* +X164673809Y-127984580D01* +X164673809Y-127984580D02* +X164769047Y-127841723D01* +X164769047Y-127841723D02* +X164816666Y-127651247D01* +X164816666Y-127651247D02* +X164816666Y-127270295D01* +X164816666Y-127270295D02* +X164769047Y-127175057D01* +X164769047Y-127175057D02* +X164721428Y-127127438D01* +X164721428Y-127127438D02* +X164626190Y-127079819D01* +X164626190Y-127079819D02* +X164435714Y-127079819D01* +X164435714Y-127079819D02* +X164340476Y-127127438D01* +X164340476Y-127127438D02* +X164292857Y-127175057D01* +X164292857Y-127175057D02* +X164245238Y-127270295D01* +X164245238Y-127270295D02* +X164245238Y-127508390D01* +X164245238Y-127508390D02* +X164292857Y-127603628D01* +X164292857Y-127603628D02* +X164340476Y-127651247D01* +X164340476Y-127651247D02* +X164435714Y-127698866D01* +X164435714Y-127698866D02* +X164626190Y-127698866D01* +X164626190Y-127698866D02* +X164721428Y-127651247D01* +X164721428Y-127651247D02* +X164769047Y-127603628D01* +X164769047Y-127603628D02* +X164816666Y-127508390D01* +X92658911Y-103973157D02* +X92563673Y-103925538D01* +X92563673Y-103925538D02* +X92468435Y-103830300D01* +X92468435Y-103830300D02* +X92325578Y-103687442D01* +X92325578Y-103687442D02* +X92230340Y-103639823D01* +X92230340Y-103639823D02* +X92135102Y-103639823D01* +X92182721Y-103877919D02* +X92087483Y-103830300D01* +X92087483Y-103830300D02* +X91992245Y-103735061D01* +X91992245Y-103735061D02* +X91944626Y-103544585D01* +X91944626Y-103544585D02* +X91944626Y-103211252D01* +X91944626Y-103211252D02* +X91992245Y-103020776D01* +X91992245Y-103020776D02* +X92087483Y-102925538D01* +X92087483Y-102925538D02* +X92182721Y-102877919D01* +X92182721Y-102877919D02* +X92373197Y-102877919D01* +X92373197Y-102877919D02* +X92468435Y-102925538D01* +X92468435Y-102925538D02* +X92563673Y-103020776D01* +X92563673Y-103020776D02* +X92611292Y-103211252D01* +X92611292Y-103211252D02* +X92611292Y-103544585D01* +X92611292Y-103544585D02* +X92563673Y-103735061D01* +X92563673Y-103735061D02* +X92468435Y-103830300D01* +X92468435Y-103830300D02* +X92373197Y-103877919D01* +X92373197Y-103877919D02* +X92182721Y-103877919D01* +X93468435Y-103211252D02* +X93468435Y-103877919D01* +X93230340Y-102830300D02* +X92992245Y-103544585D01* +X92992245Y-103544585D02* +X93611292Y-103544585D01* +X183146469Y-128241194D02* +X182146469Y-128241194D01* +X182146469Y-128241194D02* +X182146469Y-127860242D01* +X182146469Y-127860242D02* +X182194088Y-127765004D01* +X182194088Y-127765004D02* +X182241707Y-127717385D01* +X182241707Y-127717385D02* +X182336945Y-127669766D01* +X182336945Y-127669766D02* +X182479802Y-127669766D01* +X182479802Y-127669766D02* +X182575040Y-127717385D01* +X182575040Y-127717385D02* +X182622659Y-127765004D01* +X182622659Y-127765004D02* +X182670278Y-127860242D01* +X182670278Y-127860242D02* +X182670278Y-128241194D01* +X183146469Y-126717385D02* +X183146469Y-127288813D01* +X183146469Y-127003099D02* +X182146469Y-127003099D01* +X182146469Y-127003099D02* +X182289326Y-127098337D01* +X182289326Y-127098337D02* +X182384564Y-127193575D01* +X182384564Y-127193575D02* +X182432183Y-127288813D01* +X146858316Y-43604109D02* +X146524983Y-43604109D01* +X146524983Y-44127919D02* +X146524983Y-43127919D01* +X146524983Y-43127919D02* +X147001173Y-43127919D01* +X147905935Y-44127919D02* +X147334507Y-44127919D01* +X147620221Y-44127919D02* +X147620221Y-43127919D01* +X147620221Y-43127919D02* +X147524983Y-43270776D01* +X147524983Y-43270776D02* +X147429745Y-43366014D01* +X147429745Y-43366014D02* +X147334507Y-43413633D01* +X107723792Y-101347919D02* +X107390459Y-100871728D01* +X107152364Y-101347919D02* +X107152364Y-100347919D01* +X107152364Y-100347919D02* +X107533316Y-100347919D01* +X107533316Y-100347919D02* +X107628554Y-100395538D01* +X107628554Y-100395538D02* +X107676173Y-100443157D01* +X107676173Y-100443157D02* +X107723792Y-100538395D01* +X107723792Y-100538395D02* +X107723792Y-100681252D01* +X107723792Y-100681252D02* +X107676173Y-100776490D01* +X107676173Y-100776490D02* +X107628554Y-100824109D01* +X107628554Y-100824109D02* +X107533316Y-100871728D01* +X107533316Y-100871728D02* +X107152364Y-100871728D01* +X108628554Y-100347919D02* +X108152364Y-100347919D01* +X108152364Y-100347919D02* +X108104745Y-100824109D01* +X108104745Y-100824109D02* +X108152364Y-100776490D01* +X108152364Y-100776490D02* +X108247602Y-100728871D01* +X108247602Y-100728871D02* +X108485697Y-100728871D01* +X108485697Y-100728871D02* +X108580935Y-100776490D01* +X108580935Y-100776490D02* +X108628554Y-100824109D01* +X108628554Y-100824109D02* +X108676173Y-100919347D01* +X108676173Y-100919347D02* +X108676173Y-101157442D01* +X108676173Y-101157442D02* +X108628554Y-101252680D01* +X108628554Y-101252680D02* +X108580935Y-101300300D01* +X108580935Y-101300300D02* +X108485697Y-101347919D01* +X108485697Y-101347919D02* +X108247602Y-101347919D01* +X108247602Y-101347919D02* +X108152364Y-101300300D01* +X108152364Y-101300300D02* +X108104745Y-101252680D01* +X109057126Y-100443157D02* +X109104745Y-100395538D01* +X109104745Y-100395538D02* +X109199983Y-100347919D01* +X109199983Y-100347919D02* +X109438078Y-100347919D01* +X109438078Y-100347919D02* +X109533316Y-100395538D01* +X109533316Y-100395538D02* +X109580935Y-100443157D01* +X109580935Y-100443157D02* +X109628554Y-100538395D01* +X109628554Y-100538395D02* +X109628554Y-100633633D01* +X109628554Y-100633633D02* +X109580935Y-100776490D01* +X109580935Y-100776490D02* +X109009507Y-101347919D01* +X109009507Y-101347919D02* +X109628554Y-101347919D01* +D17* +X209506666Y-49979271D02* +X209506666Y-48709271D01* +X209506666Y-48709271D02* +X209930000Y-49616414D01* +X209930000Y-49616414D02* +X210353333Y-48709271D01* +X210353333Y-48709271D02* +X210353333Y-49979271D01* +X210958095Y-49979271D02* +X210958095Y-48709271D01* +X210958095Y-49314033D02* +X211683810Y-49314033D01* +X211683810Y-49979271D02* +X211683810Y-48709271D01* +X212228095Y-48830223D02* +X212288571Y-48769747D01* +X212288571Y-48769747D02* +X212409524Y-48709271D01* +X212409524Y-48709271D02* +X212711905Y-48709271D01* +X212711905Y-48709271D02* +X212832857Y-48769747D01* +X212832857Y-48769747D02* +X212893333Y-48830223D01* +X212893333Y-48830223D02* +X212953810Y-48951175D01* +X212953810Y-48951175D02* +X212953810Y-49072128D01* +X212953810Y-49072128D02* +X212893333Y-49253556D01* +X212893333Y-49253556D02* +X212167619Y-49979271D01* +X212167619Y-49979271D02* +X212953810Y-49979271D01* +D16* +X191046055Y-54120419D02* +X191046055Y-53120419D01* +X191617483Y-54120419D02* +X191188912Y-53548990D01* +X191617483Y-53120419D02* +X191046055Y-53691847D01* +X192569864Y-54120419D02* +X191998436Y-54120419D01* +X192284150Y-54120419D02* +X192284150Y-53120419D01* +X192284150Y-53120419D02* +X192188912Y-53263276D01* +X192188912Y-53263276D02* +X192093674Y-53358514D01* +X192093674Y-53358514D02* +X191998436Y-53406133D01* +X103876469Y-74436433D02* +X104590754Y-74436433D01* +X104590754Y-74436433D02* +X104733611Y-74484052D01* +X104733611Y-74484052D02* +X104828850Y-74579290D01* +X104828850Y-74579290D02* +X104876469Y-74722147D01* +X104876469Y-74722147D02* +X104876469Y-74817385D01* +X103971707Y-74007861D02* +X103924088Y-73960242D01* +X103924088Y-73960242D02* +X103876469Y-73865004D01* +X103876469Y-73865004D02* +X103876469Y-73626909D01* +X103876469Y-73626909D02* +X103924088Y-73531671D01* +X103924088Y-73531671D02* +X103971707Y-73484052D01* +X103971707Y-73484052D02* +X104066945Y-73436433D01* +X104066945Y-73436433D02* +X104162183Y-73436433D01* +X104162183Y-73436433D02* +X104305040Y-73484052D01* +X104305040Y-73484052D02* +X104876469Y-74055480D01* +X104876469Y-74055480D02* +X104876469Y-73436433D01* +X105223792Y-106347919D02* +X104890459Y-105871728D01* +X104652364Y-106347919D02* +X104652364Y-105347919D01* +X104652364Y-105347919D02* +X105033316Y-105347919D01* +X105033316Y-105347919D02* +X105128554Y-105395538D01* +X105128554Y-105395538D02* +X105176173Y-105443157D01* +X105176173Y-105443157D02* +X105223792Y-105538395D01* +X105223792Y-105538395D02* +X105223792Y-105681252D01* +X105223792Y-105681252D02* +X105176173Y-105776490D01* +X105176173Y-105776490D02* +X105128554Y-105824109D01* +X105128554Y-105824109D02* +X105033316Y-105871728D01* +X105033316Y-105871728D02* +X104652364Y-105871728D01* +X106128554Y-105347919D02* +X105652364Y-105347919D01* +X105652364Y-105347919D02* +X105604745Y-105824109D01* +X105604745Y-105824109D02* +X105652364Y-105776490D01* +X105652364Y-105776490D02* +X105747602Y-105728871D01* +X105747602Y-105728871D02* +X105985697Y-105728871D01* +X105985697Y-105728871D02* +X106080935Y-105776490D01* +X106080935Y-105776490D02* +X106128554Y-105824109D01* +X106128554Y-105824109D02* +X106176173Y-105919347D01* +X106176173Y-105919347D02* +X106176173Y-106157442D01* +X106176173Y-106157442D02* +X106128554Y-106252680D01* +X106128554Y-106252680D02* +X106080935Y-106300300D01* +X106080935Y-106300300D02* +X105985697Y-106347919D01* +X105985697Y-106347919D02* +X105747602Y-106347919D01* +X105747602Y-106347919D02* +X105652364Y-106300300D01* +X105652364Y-106300300D02* +X105604745Y-106252680D01* +X107033316Y-105347919D02* +X106842840Y-105347919D01* +X106842840Y-105347919D02* +X106747602Y-105395538D01* +X106747602Y-105395538D02* +X106699983Y-105443157D01* +X106699983Y-105443157D02* +X106604745Y-105586014D01* +X106604745Y-105586014D02* +X106557126Y-105776490D01* +X106557126Y-105776490D02* +X106557126Y-106157442D01* +X106557126Y-106157442D02* +X106604745Y-106252680D01* +X106604745Y-106252680D02* +X106652364Y-106300300D01* +X106652364Y-106300300D02* +X106747602Y-106347919D01* +X106747602Y-106347919D02* +X106938078Y-106347919D01* +X106938078Y-106347919D02* +X107033316Y-106300300D01* +X107033316Y-106300300D02* +X107080935Y-106252680D01* +X107080935Y-106252680D02* +X107128554Y-106157442D01* +X107128554Y-106157442D02* +X107128554Y-105919347D01* +X107128554Y-105919347D02* +X107080935Y-105824109D01* +X107080935Y-105824109D02* +X107033316Y-105776490D01* +X107033316Y-105776490D02* +X106938078Y-105728871D01* +X106938078Y-105728871D02* +X106747602Y-105728871D01* +X106747602Y-105728871D02* +X106652364Y-105776490D01* +X106652364Y-105776490D02* +X106604745Y-105824109D01* +X106604745Y-105824109D02* +X106557126Y-105919347D01* +X161548792Y-50152680D02* +X161501173Y-50200300D01* +X161501173Y-50200300D02* +X161358316Y-50247919D01* +X161358316Y-50247919D02* +X161263078Y-50247919D01* +X161263078Y-50247919D02* +X161120221Y-50200300D01* +X161120221Y-50200300D02* +X161024983Y-50105061D01* +X161024983Y-50105061D02* +X160977364Y-50009823D01* +X160977364Y-50009823D02* +X160929745Y-49819347D01* +X160929745Y-49819347D02* +X160929745Y-49676490D01* +X160929745Y-49676490D02* +X160977364Y-49486014D01* +X160977364Y-49486014D02* +X161024983Y-49390776D01* +X161024983Y-49390776D02* +X161120221Y-49295538D01* +X161120221Y-49295538D02* +X161263078Y-49247919D01* +X161263078Y-49247919D02* +X161358316Y-49247919D01* +X161358316Y-49247919D02* +X161501173Y-49295538D01* +X161501173Y-49295538D02* +X161548792Y-49343157D01* +X162501173Y-50247919D02* +X161929745Y-50247919D01* +X162215459Y-50247919D02* +X162215459Y-49247919D01* +X162215459Y-49247919D02* +X162120221Y-49390776D01* +X162120221Y-49390776D02* +X162024983Y-49486014D01* +X162024983Y-49486014D02* +X161929745Y-49533633D01* +X163453554Y-50247919D02* +X162882126Y-50247919D01* +X163167840Y-50247919D02* +X163167840Y-49247919D01* +X163167840Y-49247919D02* +X163072602Y-49390776D01* +X163072602Y-49390776D02* +X162977364Y-49486014D01* +X162977364Y-49486014D02* +X162882126Y-49533633D01* +X184548792Y-118332680D02* +X184501173Y-118380300D01* +X184501173Y-118380300D02* +X184358316Y-118427919D01* +X184358316Y-118427919D02* +X184263078Y-118427919D01* +X184263078Y-118427919D02* +X184120221Y-118380300D01* +X184120221Y-118380300D02* +X184024983Y-118285061D01* +X184024983Y-118285061D02* +X183977364Y-118189823D01* +X183977364Y-118189823D02* +X183929745Y-117999347D01* +X183929745Y-117999347D02* +X183929745Y-117856490D01* +X183929745Y-117856490D02* +X183977364Y-117666014D01* +X183977364Y-117666014D02* +X184024983Y-117570776D01* +X184024983Y-117570776D02* +X184120221Y-117475538D01* +X184120221Y-117475538D02* +X184263078Y-117427919D01* +X184263078Y-117427919D02* +X184358316Y-117427919D01* +X184358316Y-117427919D02* +X184501173Y-117475538D01* +X184501173Y-117475538D02* +X184548792Y-117523157D01* +X185405935Y-117761252D02* +X185405935Y-118427919D01* +X185167840Y-117380300D02* +X184929745Y-118094585D01* +X184929745Y-118094585D02* +X185548792Y-118094585D01* +X185834507Y-117427919D02* +X186453554Y-117427919D01* +X186453554Y-117427919D02* +X186120221Y-117808871D01* +X186120221Y-117808871D02* +X186263078Y-117808871D01* +X186263078Y-117808871D02* +X186358316Y-117856490D01* +X186358316Y-117856490D02* +X186405935Y-117904109D01* +X186405935Y-117904109D02* +X186453554Y-117999347D01* +X186453554Y-117999347D02* +X186453554Y-118237442D01* +X186453554Y-118237442D02* +X186405935Y-118332680D01* +X186405935Y-118332680D02* +X186358316Y-118380300D01* +X186358316Y-118380300D02* +X186263078Y-118427919D01* +X186263078Y-118427919D02* +X185977364Y-118427919D01* +X185977364Y-118427919D02* +X185882126Y-118380300D01* +X185882126Y-118380300D02* +X185834507Y-118332680D01* +X98024983Y-59377919D02* +X98024983Y-58377919D01* +X98024983Y-58377919D02* +X98263078Y-58377919D01* +X98263078Y-58377919D02* +X98405935Y-58425538D01* +X98405935Y-58425538D02* +X98501173Y-58520776D01* +X98501173Y-58520776D02* +X98548792Y-58616014D01* +X98548792Y-58616014D02* +X98596411Y-58806490D01* +X98596411Y-58806490D02* +X98596411Y-58949347D01* +X98596411Y-58949347D02* +X98548792Y-59139823D01* +X98548792Y-59139823D02* +X98501173Y-59235061D01* +X98501173Y-59235061D02* +X98405935Y-59330300D01* +X98405935Y-59330300D02* +X98263078Y-59377919D01* +X98263078Y-59377919D02* +X98024983Y-59377919D01* +X98929745Y-58711252D02* +X99453554Y-58711252D01* +X99453554Y-58711252D02* +X98929745Y-59377919D01* +X98929745Y-59377919D02* +X99453554Y-59377919D01* +X100358316Y-58425538D02* +X100263078Y-58377919D01* +X100263078Y-58377919D02* +X100120221Y-58377919D01* +X100120221Y-58377919D02* +X99977364Y-58425538D01* +X99977364Y-58425538D02* +X99882126Y-58520776D01* +X99882126Y-58520776D02* +X99834507Y-58616014D01* +X99834507Y-58616014D02* +X99786888Y-58806490D01* +X99786888Y-58806490D02* +X99786888Y-58949347D01* +X99786888Y-58949347D02* +X99834507Y-59139823D01* +X99834507Y-59139823D02* +X99882126Y-59235061D01* +X99882126Y-59235061D02* +X99977364Y-59330300D01* +X99977364Y-59330300D02* +X100120221Y-59377919D01* +X100120221Y-59377919D02* +X100215459Y-59377919D01* +X100215459Y-59377919D02* +X100358316Y-59330300D01* +X100358316Y-59330300D02* +X100405935Y-59282680D01* +X100405935Y-59282680D02* +X100405935Y-58949347D01* +X100405935Y-58949347D02* +X100215459Y-58949347D01* +X180251469Y-69965957D02* +X179775278Y-70299290D01* +X180251469Y-70537385D02* +X179251469Y-70537385D01* +X179251469Y-70537385D02* +X179251469Y-70156433D01* +X179251469Y-70156433D02* +X179299088Y-70061195D01* +X179299088Y-70061195D02* +X179346707Y-70013576D01* +X179346707Y-70013576D02* +X179441945Y-69965957D01* +X179441945Y-69965957D02* +X179584802Y-69965957D01* +X179584802Y-69965957D02* +X179680040Y-70013576D01* +X179680040Y-70013576D02* +X179727659Y-70061195D01* +X179727659Y-70061195D02* +X179775278Y-70156433D01* +X179775278Y-70156433D02* +X179775278Y-70537385D01* +X179584802Y-69108814D02* +X180251469Y-69108814D01* +X179203850Y-69346909D02* +X179918135Y-69585004D01* +X179918135Y-69585004D02* +X179918135Y-68965957D01* +X179251469Y-68394528D02* +X179251469Y-68299290D01* +X179251469Y-68299290D02* +X179299088Y-68204052D01* +X179299088Y-68204052D02* +X179346707Y-68156433D01* +X179346707Y-68156433D02* +X179441945Y-68108814D01* +X179441945Y-68108814D02* +X179632421Y-68061195D01* +X179632421Y-68061195D02* +X179870516Y-68061195D01* +X179870516Y-68061195D02* +X180060992Y-68108814D01* +X180060992Y-68108814D02* +X180156230Y-68156433D01* +X180156230Y-68156433D02* +X180203850Y-68204052D01* +X180203850Y-68204052D02* +X180251469Y-68299290D01* +X180251469Y-68299290D02* +X180251469Y-68394528D01* +X180251469Y-68394528D02* +X180203850Y-68489766D01* +X180203850Y-68489766D02* +X180156230Y-68537385D01* +X180156230Y-68537385D02* +X180060992Y-68585004D01* +X180060992Y-68585004D02* +X179870516Y-68632623D01* +X179870516Y-68632623D02* +X179632421Y-68632623D01* +X179632421Y-68632623D02* +X179441945Y-68585004D01* +X179441945Y-68585004D02* +X179346707Y-68537385D01* +X179346707Y-68537385D02* +X179299088Y-68489766D01* +X179299088Y-68489766D02* +X179251469Y-68394528D01* +X114273792Y-111347919D02* +X113940459Y-110871728D01* +X113702364Y-111347919D02* +X113702364Y-110347919D01* +X113702364Y-110347919D02* +X114083316Y-110347919D01* +X114083316Y-110347919D02* +X114178554Y-110395538D01* +X114178554Y-110395538D02* +X114226173Y-110443157D01* +X114226173Y-110443157D02* +X114273792Y-110538395D01* +X114273792Y-110538395D02* +X114273792Y-110681252D01* +X114273792Y-110681252D02* +X114226173Y-110776490D01* +X114226173Y-110776490D02* +X114178554Y-110824109D01* +X114178554Y-110824109D02* +X114083316Y-110871728D01* +X114083316Y-110871728D02* +X113702364Y-110871728D01* +X115130935Y-110681252D02* +X115130935Y-111347919D01* +X114892840Y-110300300D02* +X114654745Y-111014585D01* +X114654745Y-111014585D02* +X115273792Y-111014585D01* +X115607126Y-110443157D02* +X115654745Y-110395538D01* +X115654745Y-110395538D02* +X115749983Y-110347919D01* +X115749983Y-110347919D02* +X115988078Y-110347919D01* +X115988078Y-110347919D02* +X116083316Y-110395538D01* +X116083316Y-110395538D02* +X116130935Y-110443157D01* +X116130935Y-110443157D02* +X116178554Y-110538395D01* +X116178554Y-110538395D02* +X116178554Y-110633633D01* +X116178554Y-110633633D02* +X116130935Y-110776490D01* +X116130935Y-110776490D02* +X115559507Y-111347919D01* +X115559507Y-111347919D02* +X116178554Y-111347919D01* +D17* +X83606666Y-49779271D02* +X83606666Y-48509271D01* +X83606666Y-48509271D02* +X84030000Y-49416414D01* +X84030000Y-49416414D02* +X84453333Y-48509271D01* +X84453333Y-48509271D02* +X84453333Y-49779271D01* +X85058095Y-49779271D02* +X85058095Y-48509271D01* +X85058095Y-49114033D02* +X85783810Y-49114033D01* +X85783810Y-49779271D02* +X85783810Y-48509271D01* +X87053810Y-49779271D02* +X86328095Y-49779271D01* +X86690952Y-49779271D02* +X86690952Y-48509271D01* +X86690952Y-48509271D02* +X86570000Y-48690699D01* +X86570000Y-48690699D02* +X86449048Y-48811652D01* +X86449048Y-48811652D02* +X86328095Y-48872128D01* +D16* +X120979745Y-89947919D02* +X120979745Y-90757442D01* +X120979745Y-90757442D02* +X121027364Y-90852680D01* +X121027364Y-90852680D02* +X121074983Y-90900300D01* +X121074983Y-90900300D02* +X121170221Y-90947919D01* +X121170221Y-90947919D02* +X121360697Y-90947919D01* +X121360697Y-90947919D02* +X121455935Y-90900300D01* +X121455935Y-90900300D02* +X121503554Y-90852680D01* +X121503554Y-90852680D02* +X121551173Y-90757442D01* +X121551173Y-90757442D02* +X121551173Y-89947919D01* +X122455935Y-89947919D02* +X122265459Y-89947919D01* +X122265459Y-89947919D02* +X122170221Y-89995538D01* +X122170221Y-89995538D02* +X122122602Y-90043157D01* +X122122602Y-90043157D02* +X122027364Y-90186014D01* +X122027364Y-90186014D02* +X121979745Y-90376490D01* +X121979745Y-90376490D02* +X121979745Y-90757442D01* +X121979745Y-90757442D02* +X122027364Y-90852680D01* +X122027364Y-90852680D02* +X122074983Y-90900300D01* +X122074983Y-90900300D02* +X122170221Y-90947919D01* +X122170221Y-90947919D02* +X122360697Y-90947919D01* +X122360697Y-90947919D02* +X122455935Y-90900300D01* +X122455935Y-90900300D02* +X122503554Y-90852680D01* +X122503554Y-90852680D02* +X122551173Y-90757442D01* +X122551173Y-90757442D02* +X122551173Y-90519347D01* +X122551173Y-90519347D02* +X122503554Y-90424109D01* +X122503554Y-90424109D02* +X122455935Y-90376490D01* +X122455935Y-90376490D02* +X122360697Y-90328871D01* +X122360697Y-90328871D02* +X122170221Y-90328871D01* +X122170221Y-90328871D02* +X122074983Y-90376490D01* +X122074983Y-90376490D02* +X122027364Y-90424109D01* +X122027364Y-90424109D02* +X121979745Y-90519347D01* +X140558316Y-92477919D02* +X140558316Y-93192204D01* +X140558316Y-93192204D02* +X140510697Y-93335061D01* +X140510697Y-93335061D02* +X140415459Y-93430300D01* +X140415459Y-93430300D02* +X140272602Y-93477919D01* +X140272602Y-93477919D02* +X140177364Y-93477919D01* +X141034507Y-93477919D02* +X141034507Y-92477919D01* +X141034507Y-92477919D02* +X141415459Y-92477919D01* +X141415459Y-92477919D02* +X141510697Y-92525538D01* +X141510697Y-92525538D02* +X141558316Y-92573157D01* +X141558316Y-92573157D02* +X141605935Y-92668395D01* +X141605935Y-92668395D02* +X141605935Y-92811252D01* +X141605935Y-92811252D02* +X141558316Y-92906490D01* +X141558316Y-92906490D02* +X141510697Y-92954109D01* +X141510697Y-92954109D02* +X141415459Y-93001728D01* +X141415459Y-93001728D02* +X141034507Y-93001728D01* +X141939269Y-92477919D02* +X142558316Y-92477919D01* +X142558316Y-92477919D02* +X142224983Y-92858871D01* +X142224983Y-92858871D02* +X142367840Y-92858871D01* +X142367840Y-92858871D02* +X142463078Y-92906490D01* +X142463078Y-92906490D02* +X142510697Y-92954109D01* +X142510697Y-92954109D02* +X142558316Y-93049347D01* +X142558316Y-93049347D02* +X142558316Y-93287442D01* +X142558316Y-93287442D02* +X142510697Y-93382680D01* +X142510697Y-93382680D02* +X142463078Y-93430300D01* +X142463078Y-93430300D02* +X142367840Y-93477919D01* +X142367840Y-93477919D02* +X142082126Y-93477919D01* +X142082126Y-93477919D02* +X141986888Y-93430300D01* +X141986888Y-93430300D02* +X141939269Y-93382680D01* +X89620221Y-50373157D02* +X89524983Y-50325538D01* +X89524983Y-50325538D02* +X89429745Y-50230300D01* +X89429745Y-50230300D02* +X89286888Y-50087442D01* +X89286888Y-50087442D02* +X89191650Y-50039823D01* +X89191650Y-50039823D02* +X89096412Y-50039823D01* +X89144031Y-50277919D02* +X89048793Y-50230300D01* +X89048793Y-50230300D02* +X88953555Y-50135061D01* +X88953555Y-50135061D02* +X88905936Y-49944585D01* +X88905936Y-49944585D02* +X88905936Y-49611252D01* +X88905936Y-49611252D02* +X88953555Y-49420776D01* +X88953555Y-49420776D02* +X89048793Y-49325538D01* +X89048793Y-49325538D02* +X89144031Y-49277919D01* +X89144031Y-49277919D02* +X89334507Y-49277919D01* +X89334507Y-49277919D02* +X89429745Y-49325538D01* +X89429745Y-49325538D02* +X89524983Y-49420776D01* +X89524983Y-49420776D02* +X89572602Y-49611252D01* +X89572602Y-49611252D02* +X89572602Y-49944585D01* +X89572602Y-49944585D02* +X89524983Y-50135061D01* +X89524983Y-50135061D02* +X89429745Y-50230300D01* +X89429745Y-50230300D02* +X89334507Y-50277919D01* +X89334507Y-50277919D02* +X89144031Y-50277919D01* +X90524983Y-50277919D02* +X89953555Y-50277919D01* +X90239269Y-50277919D02* +X90239269Y-49277919D01* +X90239269Y-49277919D02* +X90144031Y-49420776D01* +X90144031Y-49420776D02* +X90048793Y-49516014D01* +X90048793Y-49516014D02* +X89953555Y-49563633D01* +X91144031Y-49277919D02* +X91239269Y-49277919D01* +X91239269Y-49277919D02* +X91334507Y-49325538D01* +X91334507Y-49325538D02* +X91382126Y-49373157D01* +X91382126Y-49373157D02* +X91429745Y-49468395D01* +X91429745Y-49468395D02* +X91477364Y-49658871D01* +X91477364Y-49658871D02* +X91477364Y-49896966D01* +X91477364Y-49896966D02* +X91429745Y-50087442D01* +X91429745Y-50087442D02* +X91382126Y-50182680D01* +X91382126Y-50182680D02* +X91334507Y-50230300D01* +X91334507Y-50230300D02* +X91239269Y-50277919D01* +X91239269Y-50277919D02* +X91144031Y-50277919D01* +X91144031Y-50277919D02* +X91048793Y-50230300D01* +X91048793Y-50230300D02* +X91001174Y-50182680D01* +X91001174Y-50182680D02* +X90953555Y-50087442D01* +X90953555Y-50087442D02* +X90905936Y-49896966D01* +X90905936Y-49896966D02* +X90905936Y-49658871D01* +X90905936Y-49658871D02* +X90953555Y-49468395D01* +X90953555Y-49468395D02* +X91001174Y-49373157D01* +X91001174Y-49373157D02* +X91048793Y-49325538D01* +X91048793Y-49325538D02* +X91144031Y-49277919D01* +X134223792Y-90347919D02* +X133890459Y-89871728D01* +X133652364Y-90347919D02* +X133652364Y-89347919D01* +X133652364Y-89347919D02* +X134033316Y-89347919D01* +X134033316Y-89347919D02* +X134128554Y-89395538D01* +X134128554Y-89395538D02* +X134176173Y-89443157D01* +X134176173Y-89443157D02* +X134223792Y-89538395D01* +X134223792Y-89538395D02* +X134223792Y-89681252D01* +X134223792Y-89681252D02* +X134176173Y-89776490D01* +X134176173Y-89776490D02* +X134128554Y-89824109D01* +X134128554Y-89824109D02* +X134033316Y-89871728D01* +X134033316Y-89871728D02* +X133652364Y-89871728D01* +X135128554Y-89347919D02* +X134652364Y-89347919D01* +X134652364Y-89347919D02* +X134604745Y-89824109D01* +X134604745Y-89824109D02* +X134652364Y-89776490D01* +X134652364Y-89776490D02* +X134747602Y-89728871D01* +X134747602Y-89728871D02* +X134985697Y-89728871D01* +X134985697Y-89728871D02* +X135080935Y-89776490D01* +X135080935Y-89776490D02* +X135128554Y-89824109D01* +X135128554Y-89824109D02* +X135176173Y-89919347D01* +X135176173Y-89919347D02* +X135176173Y-90157442D01* +X135176173Y-90157442D02* +X135128554Y-90252680D01* +X135128554Y-90252680D02* +X135080935Y-90300300D01* +X135080935Y-90300300D02* +X134985697Y-90347919D01* +X134985697Y-90347919D02* +X134747602Y-90347919D01* +X134747602Y-90347919D02* +X134652364Y-90300300D01* +X134652364Y-90300300D02* +X134604745Y-90252680D01* +X135509507Y-89347919D02* +X136128554Y-89347919D01* +X136128554Y-89347919D02* +X135795221Y-89728871D01* +X135795221Y-89728871D02* +X135938078Y-89728871D01* +X135938078Y-89728871D02* +X136033316Y-89776490D01* +X136033316Y-89776490D02* +X136080935Y-89824109D01* +X136080935Y-89824109D02* +X136128554Y-89919347D01* +X136128554Y-89919347D02* +X136128554Y-90157442D01* +X136128554Y-90157442D02* +X136080935Y-90252680D01* +X136080935Y-90252680D02* +X136033316Y-90300300D01* +X136033316Y-90300300D02* +X135938078Y-90347919D01* +X135938078Y-90347919D02* +X135652364Y-90347919D01* +X135652364Y-90347919D02* +X135557126Y-90300300D01* +X135557126Y-90300300D02* +X135509507Y-90252680D01* +X104223792Y-101347919D02* +X103890459Y-100871728D01* +X103652364Y-101347919D02* +X103652364Y-100347919D01* +X103652364Y-100347919D02* +X104033316Y-100347919D01* +X104033316Y-100347919D02* +X104128554Y-100395538D01* +X104128554Y-100395538D02* +X104176173Y-100443157D01* +X104176173Y-100443157D02* +X104223792Y-100538395D01* +X104223792Y-100538395D02* +X104223792Y-100681252D01* +X104223792Y-100681252D02* +X104176173Y-100776490D01* +X104176173Y-100776490D02* +X104128554Y-100824109D01* +X104128554Y-100824109D02* +X104033316Y-100871728D01* +X104033316Y-100871728D02* +X103652364Y-100871728D01* +X105128554Y-100347919D02* +X104652364Y-100347919D01* +X104652364Y-100347919D02* +X104604745Y-100824109D01* +X104604745Y-100824109D02* +X104652364Y-100776490D01* +X104652364Y-100776490D02* +X104747602Y-100728871D01* +X104747602Y-100728871D02* +X104985697Y-100728871D01* +X104985697Y-100728871D02* +X105080935Y-100776490D01* +X105080935Y-100776490D02* +X105128554Y-100824109D01* +X105128554Y-100824109D02* +X105176173Y-100919347D01* +X105176173Y-100919347D02* +X105176173Y-101157442D01* +X105176173Y-101157442D02* +X105128554Y-101252680D01* +X105128554Y-101252680D02* +X105080935Y-101300300D01* +X105080935Y-101300300D02* +X104985697Y-101347919D01* +X104985697Y-101347919D02* +X104747602Y-101347919D01* +X104747602Y-101347919D02* +X104652364Y-101300300D01* +X104652364Y-101300300D02* +X104604745Y-101252680D01* +X106128554Y-101347919D02* +X105557126Y-101347919D01* +X105842840Y-101347919D02* +X105842840Y-100347919D01* +X105842840Y-100347919D02* +X105747602Y-100490776D01* +X105747602Y-100490776D02* +X105652364Y-100586014D01* +X105652364Y-100586014D02* +X105557126Y-100633633D01* +X89048792Y-67832680D02* +X89001173Y-67880300D01* +X89001173Y-67880300D02* +X88858316Y-67927919D01* +X88858316Y-67927919D02* +X88763078Y-67927919D01* +X88763078Y-67927919D02* +X88620221Y-67880300D01* +X88620221Y-67880300D02* +X88524983Y-67785061D01* +X88524983Y-67785061D02* +X88477364Y-67689823D01* +X88477364Y-67689823D02* +X88429745Y-67499347D01* +X88429745Y-67499347D02* +X88429745Y-67356490D01* +X88429745Y-67356490D02* +X88477364Y-67166014D01* +X88477364Y-67166014D02* +X88524983Y-67070776D01* +X88524983Y-67070776D02* +X88620221Y-66975538D01* +X88620221Y-66975538D02* +X88763078Y-66927919D01* +X88763078Y-66927919D02* +X88858316Y-66927919D01* +X88858316Y-66927919D02* +X89001173Y-66975538D01* +X89001173Y-66975538D02* +X89048792Y-67023157D01* +X90001173Y-67927919D02* +X89429745Y-67927919D01* +X89715459Y-67927919D02* +X89715459Y-66927919D01* +X89715459Y-66927919D02* +X89620221Y-67070776D01* +X89620221Y-67070776D02* +X89524983Y-67166014D01* +X89524983Y-67166014D02* +X89429745Y-67213633D01* +X90620221Y-66927919D02* +X90715459Y-66927919D01* +X90715459Y-66927919D02* +X90810697Y-66975538D01* +X90810697Y-66975538D02* +X90858316Y-67023157D01* +X90858316Y-67023157D02* +X90905935Y-67118395D01* +X90905935Y-67118395D02* +X90953554Y-67308871D01* +X90953554Y-67308871D02* +X90953554Y-67546966D01* +X90953554Y-67546966D02* +X90905935Y-67737442D01* +X90905935Y-67737442D02* +X90858316Y-67832680D01* +X90858316Y-67832680D02* +X90810697Y-67880300D01* +X90810697Y-67880300D02* +X90715459Y-67927919D01* +X90715459Y-67927919D02* +X90620221Y-67927919D01* +X90620221Y-67927919D02* +X90524983Y-67880300D01* +X90524983Y-67880300D02* +X90477364Y-67832680D01* +X90477364Y-67832680D02* +X90429745Y-67737442D01* +X90429745Y-67737442D02* +X90382126Y-67546966D01* +X90382126Y-67546966D02* +X90382126Y-67308871D01* +X90382126Y-67308871D02* +X90429745Y-67118395D01* +X90429745Y-67118395D02* +X90477364Y-67023157D01* +X90477364Y-67023157D02* +X90524983Y-66975538D01* +X90524983Y-66975538D02* +X90620221Y-66927919D01* +X177524983Y-115347919D02* +X177191650Y-114871728D01* +X176953555Y-115347919D02* +X176953555Y-114347919D01* +X176953555Y-114347919D02* +X177334507Y-114347919D01* +X177334507Y-114347919D02* +X177429745Y-114395538D01* +X177429745Y-114395538D02* +X177477364Y-114443157D01* +X177477364Y-114443157D02* +X177524983Y-114538395D01* +X177524983Y-114538395D02* +X177524983Y-114681252D01* +X177524983Y-114681252D02* +X177477364Y-114776490D01* +X177477364Y-114776490D02* +X177429745Y-114824109D01* +X177429745Y-114824109D02* +X177334507Y-114871728D01* +X177334507Y-114871728D02* +X176953555Y-114871728D01* +X178382126Y-115300300D02* +X178286888Y-115347919D01* +X178286888Y-115347919D02* +X178096412Y-115347919D01* +X178096412Y-115347919D02* +X178001174Y-115300300D01* +X178001174Y-115300300D02* +X177953555Y-115252680D01* +X177953555Y-115252680D02* +X177905936Y-115157442D01* +X177905936Y-115157442D02* +X177905936Y-114871728D01* +X177905936Y-114871728D02* +X177953555Y-114776490D01* +X177953555Y-114776490D02* +X178001174Y-114728871D01* +X178001174Y-114728871D02* +X178096412Y-114681252D01* +X178096412Y-114681252D02* +X178286888Y-114681252D01* +X178286888Y-114681252D02* +X178382126Y-114728871D01* +X178953555Y-115347919D02* +X178858317Y-115300300D01* +X178858317Y-115300300D02* +X178810698Y-115252680D01* +X178810698Y-115252680D02* +X178763079Y-115157442D01* +X178763079Y-115157442D02* +X178763079Y-114871728D01* +X178763079Y-114871728D02* +X178810698Y-114776490D01* +X178810698Y-114776490D02* +X178858317Y-114728871D01* +X178858317Y-114728871D02* +X178953555Y-114681252D01* +X178953555Y-114681252D02* +X179096412Y-114681252D01* +X179096412Y-114681252D02* +X179191650Y-114728871D01* +X179191650Y-114728871D02* +X179239269Y-114776490D01* +X179239269Y-114776490D02* +X179286888Y-114871728D01* +X179286888Y-114871728D02* +X179286888Y-115157442D01* +X179286888Y-115157442D02* +X179239269Y-115252680D01* +X179239269Y-115252680D02* +X179191650Y-115300300D01* +X179191650Y-115300300D02* +X179096412Y-115347919D01* +X179096412Y-115347919D02* +X178953555Y-115347919D01* +X179715460Y-115347919D02* +X179715460Y-114681252D01* +X179715460Y-114776490D02* +X179763079Y-114728871D01* +X179763079Y-114728871D02* +X179858317Y-114681252D01* +X179858317Y-114681252D02* +X180001174Y-114681252D01* +X180001174Y-114681252D02* +X180096412Y-114728871D01* +X180096412Y-114728871D02* +X180144031Y-114824109D01* +X180144031Y-114824109D02* +X180144031Y-115347919D01* +X180144031Y-114824109D02* +X180191650Y-114728871D01* +X180191650Y-114728871D02* +X180286888Y-114681252D01* +X180286888Y-114681252D02* +X180429745Y-114681252D01* +X180429745Y-114681252D02* +X180524984Y-114728871D01* +X180524984Y-114728871D02* +X180572603Y-114824109D01* +X180572603Y-114824109D02* +X180572603Y-115347919D01* +X181048793Y-114681252D02* +X181048793Y-115681252D01* +X181048793Y-114728871D02* +X181144031Y-114681252D01* +X181144031Y-114681252D02* +X181334507Y-114681252D01* +X181334507Y-114681252D02* +X181429745Y-114728871D01* +X181429745Y-114728871D02* +X181477364Y-114776490D01* +X181477364Y-114776490D02* +X181524983Y-114871728D01* +X181524983Y-114871728D02* +X181524983Y-115157442D01* +X181524983Y-115157442D02* +X181477364Y-115252680D01* +X181477364Y-115252680D02* +X181429745Y-115300300D01* +X181429745Y-115300300D02* +X181334507Y-115347919D01* +X181334507Y-115347919D02* +X181144031Y-115347919D01* +X181144031Y-115347919D02* +X181048793Y-115300300D01* +X181905936Y-114443157D02* +X181953555Y-114395538D01* +X181953555Y-114395538D02* +X182048793Y-114347919D01* +X182048793Y-114347919D02* +X182286888Y-114347919D01* +X182286888Y-114347919D02* +X182382126Y-114395538D01* +X182382126Y-114395538D02* +X182429745Y-114443157D01* +X182429745Y-114443157D02* +X182477364Y-114538395D01* +X182477364Y-114538395D02* +X182477364Y-114633633D01* +X182477364Y-114633633D02* +X182429745Y-114776490D01* +X182429745Y-114776490D02* +X181858317Y-115347919D01* +X181858317Y-115347919D02* +X182477364Y-115347919D01* +X201108317Y-131730300D02* +X201251174Y-131777919D01* +X201251174Y-131777919D02* +X201489269Y-131777919D01* +X201489269Y-131777919D02* +X201584507Y-131730300D01* +X201584507Y-131730300D02* +X201632126Y-131682680D01* +X201632126Y-131682680D02* +X201679745Y-131587442D01* +X201679745Y-131587442D02* +X201679745Y-131492204D01* +X201679745Y-131492204D02* +X201632126Y-131396966D01* +X201632126Y-131396966D02* +X201584507Y-131349347D01* +X201584507Y-131349347D02* +X201489269Y-131301728D01* +X201489269Y-131301728D02* +X201298793Y-131254109D01* +X201298793Y-131254109D02* +X201203555Y-131206490D01* +X201203555Y-131206490D02* +X201155936Y-131158871D01* +X201155936Y-131158871D02* +X201108317Y-131063633D01* +X201108317Y-131063633D02* +X201108317Y-130968395D01* +X201108317Y-130968395D02* +X201155936Y-130873157D01* +X201155936Y-130873157D02* +X201203555Y-130825538D01* +X201203555Y-130825538D02* +X201298793Y-130777919D01* +X201298793Y-130777919D02* +X201536888Y-130777919D01* +X201536888Y-130777919D02* +X201679745Y-130825538D01* +X202013079Y-130777919D02* +X202251174Y-131777919D01* +X202251174Y-131777919D02* +X202441650Y-131063633D01* +X202441650Y-131063633D02* +X202632126Y-131777919D01* +X202632126Y-131777919D02* +X202870222Y-130777919D01* +X203774983Y-131777919D02* +X203203555Y-131777919D01* +X203489269Y-131777919D02* +X203489269Y-130777919D01* +X203489269Y-130777919D02* +X203394031Y-130920776D01* +X203394031Y-130920776D02* +X203298793Y-131016014D01* +X203298793Y-131016014D02* +X203203555Y-131063633D01* +X134348792Y-103347919D02* +X134015459Y-102871728D01* +X133777364Y-103347919D02* +X133777364Y-102347919D01* +X133777364Y-102347919D02* +X134158316Y-102347919D01* +X134158316Y-102347919D02* +X134253554Y-102395538D01* +X134253554Y-102395538D02* +X134301173Y-102443157D01* +X134301173Y-102443157D02* +X134348792Y-102538395D01* +X134348792Y-102538395D02* +X134348792Y-102681252D01* +X134348792Y-102681252D02* +X134301173Y-102776490D01* +X134301173Y-102776490D02* +X134253554Y-102824109D01* +X134253554Y-102824109D02* +X134158316Y-102871728D01* +X134158316Y-102871728D02* +X133777364Y-102871728D01* +X135253554Y-102347919D02* +X134777364Y-102347919D01* +X134777364Y-102347919D02* +X134729745Y-102824109D01* +X134729745Y-102824109D02* +X134777364Y-102776490D01* +X134777364Y-102776490D02* +X134872602Y-102728871D01* +X134872602Y-102728871D02* +X135110697Y-102728871D01* +X135110697Y-102728871D02* +X135205935Y-102776490D01* +X135205935Y-102776490D02* +X135253554Y-102824109D01* +X135253554Y-102824109D02* +X135301173Y-102919347D01* +X135301173Y-102919347D02* +X135301173Y-103157442D01* +X135301173Y-103157442D02* +X135253554Y-103252680D01* +X135253554Y-103252680D02* +X135205935Y-103300300D01* +X135205935Y-103300300D02* +X135110697Y-103347919D01* +X135110697Y-103347919D02* +X134872602Y-103347919D01* +X134872602Y-103347919D02* +X134777364Y-103300300D01* +X134777364Y-103300300D02* +X134729745Y-103252680D01* +X135872602Y-102776490D02* +X135777364Y-102728871D01* +X135777364Y-102728871D02* +X135729745Y-102681252D01* +X135729745Y-102681252D02* +X135682126Y-102586014D01* +X135682126Y-102586014D02* +X135682126Y-102538395D01* +X135682126Y-102538395D02* +X135729745Y-102443157D01* +X135729745Y-102443157D02* +X135777364Y-102395538D01* +X135777364Y-102395538D02* +X135872602Y-102347919D01* +X135872602Y-102347919D02* +X136063078Y-102347919D01* +X136063078Y-102347919D02* +X136158316Y-102395538D01* +X136158316Y-102395538D02* +X136205935Y-102443157D01* +X136205935Y-102443157D02* +X136253554Y-102538395D01* +X136253554Y-102538395D02* +X136253554Y-102586014D01* +X136253554Y-102586014D02* +X136205935Y-102681252D01* +X136205935Y-102681252D02* +X136158316Y-102728871D01* +X136158316Y-102728871D02* +X136063078Y-102776490D01* +X136063078Y-102776490D02* +X135872602Y-102776490D01* +X135872602Y-102776490D02* +X135777364Y-102824109D01* +X135777364Y-102824109D02* +X135729745Y-102871728D01* +X135729745Y-102871728D02* +X135682126Y-102966966D01* +X135682126Y-102966966D02* +X135682126Y-103157442D01* +X135682126Y-103157442D02* +X135729745Y-103252680D01* +X135729745Y-103252680D02* +X135777364Y-103300300D01* +X135777364Y-103300300D02* +X135872602Y-103347919D01* +X135872602Y-103347919D02* +X136063078Y-103347919D01* +X136063078Y-103347919D02* +X136158316Y-103300300D01* +X136158316Y-103300300D02* +X136205935Y-103252680D01* +X136205935Y-103252680D02* +X136253554Y-103157442D01* +X136253554Y-103157442D02* +X136253554Y-102966966D01* +X136253554Y-102966966D02* +X136205935Y-102871728D01* +X136205935Y-102871728D02* +X136158316Y-102824109D01* +X136158316Y-102824109D02* +X136063078Y-102776490D01* +X84739268Y-60347919D02* +X84405935Y-59871728D01* +X84167840Y-60347919D02* +X84167840Y-59347919D01* +X84167840Y-59347919D02* +X84548792Y-59347919D01* +X84548792Y-59347919D02* +X84644030Y-59395538D01* +X84644030Y-59395538D02* +X84691649Y-59443157D01* +X84691649Y-59443157D02* +X84739268Y-59538395D01* +X84739268Y-59538395D02* +X84739268Y-59681252D01* +X84739268Y-59681252D02* +X84691649Y-59776490D01* +X84691649Y-59776490D02* +X84644030Y-59824109D01* +X84644030Y-59824109D02* +X84548792Y-59871728D01* +X84548792Y-59871728D02* +X84167840Y-59871728D01* +X85167840Y-60347919D02* +X85167840Y-59681252D01* +X85167840Y-59871728D02* +X85215459Y-59776490D01* +X85215459Y-59776490D02* +X85263078Y-59728871D01* +X85263078Y-59728871D02* +X85358316Y-59681252D01* +X85358316Y-59681252D02* +X85453554Y-59681252D01* +X85786888Y-59681252D02* +X85786888Y-60681252D01* +X85786888Y-59728871D02* +X85882126Y-59681252D01* +X85882126Y-59681252D02* +X86072602Y-59681252D01* +X86072602Y-59681252D02* +X86167840Y-59728871D01* +X86167840Y-59728871D02* +X86215459Y-59776490D01* +X86215459Y-59776490D02* +X86263078Y-59871728D01* +X86263078Y-59871728D02* +X86263078Y-60157442D01* +X86263078Y-60157442D02* +X86215459Y-60252680D01* +X86215459Y-60252680D02* +X86167840Y-60300300D01* +X86167840Y-60300300D02* +X86072602Y-60347919D01* +X86072602Y-60347919D02* +X85882126Y-60347919D01* +X85882126Y-60347919D02* +X85786888Y-60300300D01* +X183096411Y-61473157D02* +X183001173Y-61425538D01* +X183001173Y-61425538D02* +X182905935Y-61330300D01* +X182905935Y-61330300D02* +X182763078Y-61187442D01* +X182763078Y-61187442D02* +X182667840Y-61139823D01* +X182667840Y-61139823D02* +X182572602Y-61139823D01* +X182620221Y-61377919D02* +X182524983Y-61330300D01* +X182524983Y-61330300D02* +X182429745Y-61235061D01* +X182429745Y-61235061D02* +X182382126Y-61044585D01* +X182382126Y-61044585D02* +X182382126Y-60711252D01* +X182382126Y-60711252D02* +X182429745Y-60520776D01* +X182429745Y-60520776D02* +X182524983Y-60425538D01* +X182524983Y-60425538D02* +X182620221Y-60377919D01* +X182620221Y-60377919D02* +X182810697Y-60377919D01* +X182810697Y-60377919D02* +X182905935Y-60425538D01* +X182905935Y-60425538D02* +X183001173Y-60520776D01* +X183001173Y-60520776D02* +X183048792Y-60711252D01* +X183048792Y-60711252D02* +X183048792Y-61044585D01* +X183048792Y-61044585D02* +X183001173Y-61235061D01* +X183001173Y-61235061D02* +X182905935Y-61330300D01* +X182905935Y-61330300D02* +X182810697Y-61377919D01* +X182810697Y-61377919D02* +X182620221Y-61377919D01* +X183905935Y-60377919D02* +X183715459Y-60377919D01* +X183715459Y-60377919D02* +X183620221Y-60425538D01* +X183620221Y-60425538D02* +X183572602Y-60473157D01* +X183572602Y-60473157D02* +X183477364Y-60616014D01* +X183477364Y-60616014D02* +X183429745Y-60806490D01* +X183429745Y-60806490D02* +X183429745Y-61187442D01* +X183429745Y-61187442D02* +X183477364Y-61282680D01* +X183477364Y-61282680D02* +X183524983Y-61330300D01* +X183524983Y-61330300D02* +X183620221Y-61377919D01* +X183620221Y-61377919D02* +X183810697Y-61377919D01* +X183810697Y-61377919D02* +X183905935Y-61330300D01* +X183905935Y-61330300D02* +X183953554Y-61282680D01* +X183953554Y-61282680D02* +X184001173Y-61187442D01* +X184001173Y-61187442D02* +X184001173Y-60949347D01* +X184001173Y-60949347D02* +X183953554Y-60854109D01* +X183953554Y-60854109D02* +X183905935Y-60806490D01* +X183905935Y-60806490D02* +X183810697Y-60758871D01* +X183810697Y-60758871D02* +X183620221Y-60758871D01* +X183620221Y-60758871D02* +X183524983Y-60806490D01* +X183524983Y-60806490D02* +X183477364Y-60854109D01* +X183477364Y-60854109D02* +X183429745Y-60949347D01* +X111773792Y-96252680D02* +X111726173Y-96300300D01* +X111726173Y-96300300D02* +X111583316Y-96347919D01* +X111583316Y-96347919D02* +X111488078Y-96347919D01* +X111488078Y-96347919D02* +X111345221Y-96300300D01* +X111345221Y-96300300D02* +X111249983Y-96205061D01* +X111249983Y-96205061D02* +X111202364Y-96109823D01* +X111202364Y-96109823D02* +X111154745Y-95919347D01* +X111154745Y-95919347D02* +X111154745Y-95776490D01* +X111154745Y-95776490D02* +X111202364Y-95586014D01* +X111202364Y-95586014D02* +X111249983Y-95490776D01* +X111249983Y-95490776D02* +X111345221Y-95395538D01* +X111345221Y-95395538D02* +X111488078Y-95347919D01* +X111488078Y-95347919D02* +X111583316Y-95347919D01* +X111583316Y-95347919D02* +X111726173Y-95395538D01* +X111726173Y-95395538D02* +X111773792Y-95443157D01* +X112107126Y-95347919D02* +X112726173Y-95347919D01* +X112726173Y-95347919D02* +X112392840Y-95728871D01* +X112392840Y-95728871D02* +X112535697Y-95728871D01* +X112535697Y-95728871D02* +X112630935Y-95776490D01* +X112630935Y-95776490D02* +X112678554Y-95824109D01* +X112678554Y-95824109D02* +X112726173Y-95919347D01* +X112726173Y-95919347D02* +X112726173Y-96157442D01* +X112726173Y-96157442D02* +X112678554Y-96252680D01* +X112678554Y-96252680D02* +X112630935Y-96300300D01* +X112630935Y-96300300D02* +X112535697Y-96347919D01* +X112535697Y-96347919D02* +X112249983Y-96347919D01* +X112249983Y-96347919D02* +X112154745Y-96300300D01* +X112154745Y-96300300D02* +X112107126Y-96252680D01* +X113678554Y-96347919D02* +X113107126Y-96347919D01* +X113392840Y-96347919D02* +X113392840Y-95347919D01* +X113392840Y-95347919D02* +X113297602Y-95490776D01* +X113297602Y-95490776D02* +X113202364Y-95586014D01* +X113202364Y-95586014D02* +X113107126Y-95633633D01* +X176448792Y-44347919D02* +X176115459Y-43871728D01* +X175877364Y-44347919D02* +X175877364Y-43347919D01* +X175877364Y-43347919D02* +X176258316Y-43347919D01* +X176258316Y-43347919D02* +X176353554Y-43395538D01* +X176353554Y-43395538D02* +X176401173Y-43443157D01* +X176401173Y-43443157D02* +X176448792Y-43538395D01* +X176448792Y-43538395D02* +X176448792Y-43681252D01* +X176448792Y-43681252D02* +X176401173Y-43776490D01* +X176401173Y-43776490D02* +X176353554Y-43824109D01* +X176353554Y-43824109D02* +X176258316Y-43871728D01* +X176258316Y-43871728D02* +X175877364Y-43871728D01* +X176829745Y-43443157D02* +X176877364Y-43395538D01* +X176877364Y-43395538D02* +X176972602Y-43347919D01* +X176972602Y-43347919D02* +X177210697Y-43347919D01* +X177210697Y-43347919D02* +X177305935Y-43395538D01* +X177305935Y-43395538D02* +X177353554Y-43443157D01* +X177353554Y-43443157D02* +X177401173Y-43538395D01* +X177401173Y-43538395D02* +X177401173Y-43633633D01* +X177401173Y-43633633D02* +X177353554Y-43776490D01* +X177353554Y-43776490D02* +X176782126Y-44347919D01* +X176782126Y-44347919D02* +X177401173Y-44347919D01* +X178353554Y-44347919D02* +X177782126Y-44347919D01* +X178067840Y-44347919D02* +X178067840Y-43347919D01* +X178067840Y-43347919D02* +X177972602Y-43490776D01* +X177972602Y-43490776D02* +X177877364Y-43586014D01* +X177877364Y-43586014D02* +X177782126Y-43633633D01* +X99548792Y-97002680D02* +X99501173Y-97050300D01* +X99501173Y-97050300D02* +X99358316Y-97097919D01* +X99358316Y-97097919D02* +X99263078Y-97097919D01* +X99263078Y-97097919D02* +X99120221Y-97050300D01* +X99120221Y-97050300D02* +X99024983Y-96955061D01* +X99024983Y-96955061D02* +X98977364Y-96859823D01* +X98977364Y-96859823D02* +X98929745Y-96669347D01* +X98929745Y-96669347D02* +X98929745Y-96526490D01* +X98929745Y-96526490D02* +X98977364Y-96336014D01* +X98977364Y-96336014D02* +X99024983Y-96240776D01* +X99024983Y-96240776D02* +X99120221Y-96145538D01* +X99120221Y-96145538D02* +X99263078Y-96097919D01* +X99263078Y-96097919D02* +X99358316Y-96097919D01* +X99358316Y-96097919D02* +X99501173Y-96145538D01* +X99501173Y-96145538D02* +X99548792Y-96193157D01* +X99882126Y-96097919D02* +X100501173Y-96097919D01* +X100501173Y-96097919D02* +X100167840Y-96478871D01* +X100167840Y-96478871D02* +X100310697Y-96478871D01* +X100310697Y-96478871D02* +X100405935Y-96526490D01* +X100405935Y-96526490D02* +X100453554Y-96574109D01* +X100453554Y-96574109D02* +X100501173Y-96669347D01* +X100501173Y-96669347D02* +X100501173Y-96907442D01* +X100501173Y-96907442D02* +X100453554Y-97002680D01* +X100453554Y-97002680D02* +X100405935Y-97050300D01* +X100405935Y-97050300D02* +X100310697Y-97097919D01* +X100310697Y-97097919D02* +X100024983Y-97097919D01* +X100024983Y-97097919D02* +X99929745Y-97050300D01* +X99929745Y-97050300D02* +X99882126Y-97002680D01* +X101120221Y-96097919D02* +X101215459Y-96097919D01* +X101215459Y-96097919D02* +X101310697Y-96145538D01* +X101310697Y-96145538D02* +X101358316Y-96193157D01* +X101358316Y-96193157D02* +X101405935Y-96288395D01* +X101405935Y-96288395D02* +X101453554Y-96478871D01* +X101453554Y-96478871D02* +X101453554Y-96716966D01* +X101453554Y-96716966D02* +X101405935Y-96907442D01* +X101405935Y-96907442D02* +X101358316Y-97002680D01* +X101358316Y-97002680D02* +X101310697Y-97050300D01* +X101310697Y-97050300D02* +X101215459Y-97097919D01* +X101215459Y-97097919D02* +X101120221Y-97097919D01* +X101120221Y-97097919D02* +X101024983Y-97050300D01* +X101024983Y-97050300D02* +X100977364Y-97002680D01* +X100977364Y-97002680D02* +X100929745Y-96907442D01* +X100929745Y-96907442D02* +X100882126Y-96716966D01* +X100882126Y-96716966D02* +X100882126Y-96478871D01* +X100882126Y-96478871D02* +X100929745Y-96288395D01* +X100929745Y-96288395D02* +X100977364Y-96193157D01* +X100977364Y-96193157D02* +X101024983Y-96145538D01* +X101024983Y-96145538D02* +X101120221Y-96097919D01* +X102749983Y-111347919D02* +X102416650Y-110871728D01* +X102178555Y-111347919D02* +X102178555Y-110347919D01* +X102178555Y-110347919D02* +X102559507Y-110347919D01* +X102559507Y-110347919D02* +X102654745Y-110395538D01* +X102654745Y-110395538D02* +X102702364Y-110443157D01* +X102702364Y-110443157D02* +X102749983Y-110538395D01* +X102749983Y-110538395D02* +X102749983Y-110681252D01* +X102749983Y-110681252D02* +X102702364Y-110776490D01* +X102702364Y-110776490D02* +X102654745Y-110824109D01* +X102654745Y-110824109D02* +X102559507Y-110871728D01* +X102559507Y-110871728D02* +X102178555Y-110871728D01* +X103083317Y-110347919D02* +X103749983Y-110347919D01* +X103749983Y-110347919D02* +X103321412Y-111347919D01* +X157459580Y-44116666D02* +X157507200Y-44164285D01* +X157507200Y-44164285D02* +X157554819Y-44307142D01* +X157554819Y-44307142D02* +X157554819Y-44402380D01* +X157554819Y-44402380D02* +X157507200Y-44545237D01* +X157507200Y-44545237D02* +X157411961Y-44640475D01* +X157411961Y-44640475D02* +X157316723Y-44688094D01* +X157316723Y-44688094D02* +X157126247Y-44735713D01* +X157126247Y-44735713D02* +X156983390Y-44735713D01* +X156983390Y-44735713D02* +X156792914Y-44688094D01* +X156792914Y-44688094D02* +X156697676Y-44640475D01* +X156697676Y-44640475D02* +X156602438Y-44545237D01* +X156602438Y-44545237D02* +X156554819Y-44402380D01* +X156554819Y-44402380D02* +X156554819Y-44307142D01* +X156554819Y-44307142D02* +X156602438Y-44164285D01* +X156602438Y-44164285D02* +X156650057Y-44116666D01* +X156554819Y-43783332D02* +X156554819Y-43164285D01* +X156554819Y-43164285D02* +X156935771Y-43497618D01* +X156935771Y-43497618D02* +X156935771Y-43354761D01* +X156935771Y-43354761D02* +X156983390Y-43259523D01* +X156983390Y-43259523D02* +X157031009Y-43211904D01* +X157031009Y-43211904D02* +X157126247Y-43164285D01* +X157126247Y-43164285D02* +X157364342Y-43164285D01* +X157364342Y-43164285D02* +X157459580Y-43211904D01* +X157459580Y-43211904D02* +X157507200Y-43259523D01* +X157507200Y-43259523D02* +X157554819Y-43354761D01* +X157554819Y-43354761D02* +X157554819Y-43640475D01* +X157554819Y-43640475D02* +X157507200Y-43735713D01* +X157507200Y-43735713D02* +X157459580Y-43783332D01* +X94453555Y-81777919D02* +X94453555Y-80777919D01* +X94453555Y-80777919D02* +X94691650Y-80777919D01* +X94691650Y-80777919D02* +X94834507Y-80825538D01* +X94834507Y-80825538D02* +X94929745Y-80920776D01* +X94929745Y-80920776D02* +X94977364Y-81016014D01* +X94977364Y-81016014D02* +X95024983Y-81206490D01* +X95024983Y-81206490D02* +X95024983Y-81349347D01* +X95024983Y-81349347D02* +X94977364Y-81539823D01* +X94977364Y-81539823D02* +X94929745Y-81635061D01* +X94929745Y-81635061D02* +X94834507Y-81730300D01* +X94834507Y-81730300D02* +X94691650Y-81777919D01* +X94691650Y-81777919D02* +X94453555Y-81777919D01* +X95929745Y-80777919D02* +X95453555Y-80777919D01* +X95453555Y-80777919D02* +X95405936Y-81254109D01* +X95405936Y-81254109D02* +X95453555Y-81206490D01* +X95453555Y-81206490D02* +X95548793Y-81158871D01* +X95548793Y-81158871D02* +X95786888Y-81158871D01* +X95786888Y-81158871D02* +X95882126Y-81206490D01* +X95882126Y-81206490D02* +X95929745Y-81254109D01* +X95929745Y-81254109D02* +X95977364Y-81349347D01* +X95977364Y-81349347D02* +X95977364Y-81587442D01* +X95977364Y-81587442D02* +X95929745Y-81682680D01* +X95929745Y-81682680D02* +X95882126Y-81730300D01* +X95882126Y-81730300D02* +X95786888Y-81777919D01* +X95786888Y-81777919D02* +X95548793Y-81777919D01* +X95548793Y-81777919D02* +X95453555Y-81730300D01* +X95453555Y-81730300D02* +X95405936Y-81682680D01* +X125523792Y-102382680D02* +X125476173Y-102430300D01* +X125476173Y-102430300D02* +X125333316Y-102477919D01* +X125333316Y-102477919D02* +X125238078Y-102477919D01* +X125238078Y-102477919D02* +X125095221Y-102430300D01* +X125095221Y-102430300D02* +X124999983Y-102335061D01* +X124999983Y-102335061D02* +X124952364Y-102239823D01* +X124952364Y-102239823D02* +X124904745Y-102049347D01* +X124904745Y-102049347D02* +X124904745Y-101906490D01* +X124904745Y-101906490D02* +X124952364Y-101716014D01* +X124952364Y-101716014D02* +X124999983Y-101620776D01* +X124999983Y-101620776D02* +X125095221Y-101525538D01* +X125095221Y-101525538D02* +X125238078Y-101477919D01* +X125238078Y-101477919D02* +X125333316Y-101477919D01* +X125333316Y-101477919D02* +X125476173Y-101525538D01* +X125476173Y-101525538D02* +X125523792Y-101573157D01* +X125857126Y-101477919D02* +X126476173Y-101477919D01* +X126476173Y-101477919D02* +X126142840Y-101858871D01* +X126142840Y-101858871D02* +X126285697Y-101858871D01* +X126285697Y-101858871D02* +X126380935Y-101906490D01* +X126380935Y-101906490D02* +X126428554Y-101954109D01* +X126428554Y-101954109D02* +X126476173Y-102049347D01* +X126476173Y-102049347D02* +X126476173Y-102287442D01* +X126476173Y-102287442D02* +X126428554Y-102382680D01* +X126428554Y-102382680D02* +X126380935Y-102430300D01* +X126380935Y-102430300D02* +X126285697Y-102477919D01* +X126285697Y-102477919D02* +X125999983Y-102477919D01* +X125999983Y-102477919D02* +X125904745Y-102430300D01* +X125904745Y-102430300D02* +X125857126Y-102382680D01* +X126809507Y-101477919D02* +X127428554Y-101477919D01* +X127428554Y-101477919D02* +X127095221Y-101858871D01* +X127095221Y-101858871D02* +X127238078Y-101858871D01* +X127238078Y-101858871D02* +X127333316Y-101906490D01* +X127333316Y-101906490D02* +X127380935Y-101954109D01* +X127380935Y-101954109D02* +X127428554Y-102049347D01* +X127428554Y-102049347D02* +X127428554Y-102287442D01* +X127428554Y-102287442D02* +X127380935Y-102382680D01* +X127380935Y-102382680D02* +X127333316Y-102430300D01* +X127333316Y-102430300D02* +X127238078Y-102477919D01* +X127238078Y-102477919D02* +X126952364Y-102477919D01* +X126952364Y-102477919D02* +X126857126Y-102430300D01* +X126857126Y-102430300D02* +X126809507Y-102382680D01* +X160160769Y-56721867D02* +X159684578Y-57055200D01* +X160160769Y-57293295D02* +X159160769Y-57293295D01* +X159160769Y-57293295D02* +X159160769Y-56912343D01* +X159160769Y-56912343D02* +X159208388Y-56817105D01* +X159208388Y-56817105D02* +X159256007Y-56769486D01* +X159256007Y-56769486D02* +X159351245Y-56721867D01* +X159351245Y-56721867D02* +X159494102Y-56721867D01* +X159494102Y-56721867D02* +X159589340Y-56769486D01* +X159589340Y-56769486D02* +X159636959Y-56817105D01* +X159636959Y-56817105D02* +X159684578Y-56912343D01* +X159684578Y-56912343D02* +X159684578Y-57293295D01* +X159494102Y-56436152D02* +X159494102Y-56055200D01* +X160160769Y-56293295D02* +X159303626Y-56293295D01* +X159303626Y-56293295D02* +X159208388Y-56245676D01* +X159208388Y-56245676D02* +X159160769Y-56150438D01* +X159160769Y-56150438D02* +X159160769Y-56055200D01* +X160160769Y-55721866D02* +X159494102Y-55721866D01* +X159684578Y-55721866D02* +X159589340Y-55674247D01* +X159589340Y-55674247D02* +X159541721Y-55626628D01* +X159541721Y-55626628D02* +X159494102Y-55531390D01* +X159494102Y-55531390D02* +X159494102Y-55436152D01* +X160113150Y-54721866D02* +X160160769Y-54817104D01* +X160160769Y-54817104D02* +X160160769Y-55007580D01* +X160160769Y-55007580D02* +X160113150Y-55102818D01* +X160113150Y-55102818D02* +X160017911Y-55150437D01* +X160017911Y-55150437D02* +X159636959Y-55150437D01* +X159636959Y-55150437D02* +X159541721Y-55102818D01* +X159541721Y-55102818D02* +X159494102Y-55007580D01* +X159494102Y-55007580D02* +X159494102Y-54817104D01* +X159494102Y-54817104D02* +X159541721Y-54721866D01* +X159541721Y-54721866D02* +X159636959Y-54674247D01* +X159636959Y-54674247D02* +X159732197Y-54674247D01* +X159732197Y-54674247D02* +X159827435Y-55150437D01* +X159494102Y-53817104D02* +X160494102Y-53817104D01* +X160113150Y-53817104D02* +X160160769Y-53912342D01* +X160160769Y-53912342D02* +X160160769Y-54102818D01* +X160160769Y-54102818D02* +X160113150Y-54198056D01* +X160113150Y-54198056D02* +X160065530Y-54245675D01* +X160065530Y-54245675D02* +X159970292Y-54293294D01* +X159970292Y-54293294D02* +X159684578Y-54293294D01* +X159684578Y-54293294D02* +X159589340Y-54245675D01* +X159589340Y-54245675D02* +X159541721Y-54198056D01* +X159541721Y-54198056D02* +X159494102Y-54102818D01* +X159494102Y-54102818D02* +X159494102Y-53912342D01* +X159494102Y-53912342D02* +X159541721Y-53817104D01* +X207096469Y-92311194D02* +X206096469Y-92311194D01* +X206096469Y-92311194D02* +X206096469Y-91930242D01* +X206096469Y-91930242D02* +X206144088Y-91835004D01* +X206144088Y-91835004D02* +X206191707Y-91787385D01* +X206191707Y-91787385D02* +X206286945Y-91739766D01* +X206286945Y-91739766D02* +X206429802Y-91739766D01* +X206429802Y-91739766D02* +X206525040Y-91787385D01* +X206525040Y-91787385D02* +X206572659Y-91835004D01* +X206572659Y-91835004D02* +X206620278Y-91930242D01* +X206620278Y-91930242D02* +X206620278Y-92311194D01* +X206096469Y-91406432D02* +X206096469Y-90787385D01* +X206096469Y-90787385D02* +X206477421Y-91120718D01* +X206477421Y-91120718D02* +X206477421Y-90977861D01* +X206477421Y-90977861D02* +X206525040Y-90882623D01* +X206525040Y-90882623D02* +X206572659Y-90835004D01* +X206572659Y-90835004D02* +X206667897Y-90787385D01* +X206667897Y-90787385D02* +X206905992Y-90787385D01* +X206905992Y-90787385D02* +X207001230Y-90835004D01* +X207001230Y-90835004D02* +X207048850Y-90882623D01* +X207048850Y-90882623D02* +X207096469Y-90977861D01* +X207096469Y-90977861D02* +X207096469Y-91263575D01* +X207096469Y-91263575D02* +X207048850Y-91358813D01* +X207048850Y-91358813D02* +X207001230Y-91406432D01* +X100985697Y-71207919D02* +X100652364Y-70731728D01* +X100414269Y-71207919D02* +X100414269Y-70207919D01* +X100414269Y-70207919D02* +X100795221Y-70207919D01* +X100795221Y-70207919D02* +X100890459Y-70255538D01* +X100890459Y-70255538D02* +X100938078Y-70303157D01* +X100938078Y-70303157D02* +X100985697Y-70398395D01* +X100985697Y-70398395D02* +X100985697Y-70541252D01* +X100985697Y-70541252D02* +X100938078Y-70636490D01* +X100938078Y-70636490D02* +X100890459Y-70684109D01* +X100890459Y-70684109D02* +X100795221Y-70731728D01* +X100795221Y-70731728D02* +X100414269Y-70731728D01* +X101414269Y-71207919D02* +X101414269Y-70541252D01* +X101414269Y-70207919D02* +X101366650Y-70255538D01* +X101366650Y-70255538D02* +X101414269Y-70303157D01* +X101414269Y-70303157D02* +X101461888Y-70255538D01* +X101461888Y-70255538D02* +X101414269Y-70207919D01* +X101414269Y-70207919D02* +X101414269Y-70303157D01* +X102319030Y-70541252D02* +X102319030Y-71350776D01* +X102319030Y-71350776D02* +X102271411Y-71446014D01* +X102271411Y-71446014D02* +X102223792Y-71493633D01* +X102223792Y-71493633D02* +X102128554Y-71541252D01* +X102128554Y-71541252D02* +X101985697Y-71541252D01* +X101985697Y-71541252D02* +X101890459Y-71493633D01* +X102319030Y-71160300D02* +X102223792Y-71207919D01* +X102223792Y-71207919D02* +X102033316Y-71207919D01* +X102033316Y-71207919D02* +X101938078Y-71160300D01* +X101938078Y-71160300D02* +X101890459Y-71112680D01* +X101890459Y-71112680D02* +X101842840Y-71017442D01* +X101842840Y-71017442D02* +X101842840Y-70731728D01* +X101842840Y-70731728D02* +X101890459Y-70636490D01* +X101890459Y-70636490D02* +X101938078Y-70588871D01* +X101938078Y-70588871D02* +X102033316Y-70541252D01* +X102033316Y-70541252D02* +X102223792Y-70541252D01* +X102223792Y-70541252D02* +X102319030Y-70588871D01* +X193587483Y-47347919D02* +X193254150Y-46871728D01* +X193016055Y-47347919D02* +X193016055Y-46347919D01* +X193016055Y-46347919D02* +X193397007Y-46347919D01* +X193397007Y-46347919D02* +X193492245Y-46395538D01* +X193492245Y-46395538D02* +X193539864Y-46443157D01* +X193539864Y-46443157D02* +X193587483Y-46538395D01* +X193587483Y-46538395D02* +X193587483Y-46681252D01* +X193587483Y-46681252D02* +X193539864Y-46776490D01* +X193539864Y-46776490D02* +X193492245Y-46824109D01* +X193492245Y-46824109D02* +X193397007Y-46871728D01* +X193397007Y-46871728D02* +X193016055Y-46871728D01* +X194349388Y-46824109D02* +X194492245Y-46871728D01* +X194492245Y-46871728D02* +X194539864Y-46919347D01* +X194539864Y-46919347D02* +X194587483Y-47014585D01* +X194587483Y-47014585D02* +X194587483Y-47157442D01* +X194587483Y-47157442D02* +X194539864Y-47252680D01* +X194539864Y-47252680D02* +X194492245Y-47300300D01* +X194492245Y-47300300D02* +X194397007Y-47347919D01* +X194397007Y-47347919D02* +X194016055Y-47347919D01* +X194016055Y-47347919D02* +X194016055Y-46347919D01* +X194016055Y-46347919D02* +X194349388Y-46347919D01* +X194349388Y-46347919D02* +X194444626Y-46395538D01* +X194444626Y-46395538D02* +X194492245Y-46443157D01* +X194492245Y-46443157D02* +X194539864Y-46538395D01* +X194539864Y-46538395D02* +X194539864Y-46633633D01* +X194539864Y-46633633D02* +X194492245Y-46728871D01* +X194492245Y-46728871D02* +X194444626Y-46776490D01* +X194444626Y-46776490D02* +X194349388Y-46824109D01* +X194349388Y-46824109D02* +X194016055Y-46824109D01* +X195539864Y-47347919D02* +X194968436Y-47347919D01* +X195254150Y-47347919D02* +X195254150Y-46347919D01* +X195254150Y-46347919D02* +X195158912Y-46490776D01* +X195158912Y-46490776D02* +X195063674Y-46586014D01* +X195063674Y-46586014D02* +X194968436Y-46633633D01* +X173144030Y-58347919D02* +X172810697Y-57871728D01* +X172572602Y-58347919D02* +X172572602Y-57347919D01* +X172572602Y-57347919D02* +X172953554Y-57347919D01* +X172953554Y-57347919D02* +X173048792Y-57395538D01* +X173048792Y-57395538D02* +X173096411Y-57443157D01* +X173096411Y-57443157D02* +X173144030Y-57538395D01* +X173144030Y-57538395D02* +X173144030Y-57681252D01* +X173144030Y-57681252D02* +X173096411Y-57776490D01* +X173096411Y-57776490D02* +X173048792Y-57824109D01* +X173048792Y-57824109D02* +X172953554Y-57871728D01* +X172953554Y-57871728D02* +X172572602Y-57871728D01* +X173953554Y-58300300D02* +X173858316Y-58347919D01* +X173858316Y-58347919D02* +X173667840Y-58347919D01* +X173667840Y-58347919D02* +X173572602Y-58300300D01* +X173572602Y-58300300D02* +X173524983Y-58205061D01* +X173524983Y-58205061D02* +X173524983Y-57824109D01* +X173524983Y-57824109D02* +X173572602Y-57728871D01* +X173572602Y-57728871D02* +X173667840Y-57681252D01* +X173667840Y-57681252D02* +X173858316Y-57681252D01* +X173858316Y-57681252D02* +X173953554Y-57728871D01* +X173953554Y-57728871D02* +X174001173Y-57824109D01* +X174001173Y-57824109D02* +X174001173Y-57919347D01* +X174001173Y-57919347D02* +X173524983Y-58014585D01* +X174429745Y-57681252D02* +X174429745Y-58347919D01* +X174429745Y-57776490D02* +X174477364Y-57728871D01* +X174477364Y-57728871D02* +X174572602Y-57681252D01* +X174572602Y-57681252D02* +X174715459Y-57681252D01* +X174715459Y-57681252D02* +X174810697Y-57728871D01* +X174810697Y-57728871D02* +X174858316Y-57824109D01* +X174858316Y-57824109D02* +X174858316Y-58347919D01* +X175858316Y-58347919D02* +X175286888Y-58347919D01* +X175572602Y-58347919D02* +X175572602Y-57347919D01* +X175572602Y-57347919D02* +X175477364Y-57490776D01* +X175477364Y-57490776D02* +X175382126Y-57586014D01* +X175382126Y-57586014D02* +X175286888Y-57633633D01* +X92024983Y-115252680D02* +X91977364Y-115300300D01* +X91977364Y-115300300D02* +X91834507Y-115347919D01* +X91834507Y-115347919D02* +X91739269Y-115347919D01* +X91739269Y-115347919D02* +X91596412Y-115300300D01* +X91596412Y-115300300D02* +X91501174Y-115205061D01* +X91501174Y-115205061D02* +X91453555Y-115109823D01* +X91453555Y-115109823D02* +X91405936Y-114919347D01* +X91405936Y-114919347D02* +X91405936Y-114776490D01* +X91405936Y-114776490D02* +X91453555Y-114586014D01* +X91453555Y-114586014D02* +X91501174Y-114490776D01* +X91501174Y-114490776D02* +X91596412Y-114395538D01* +X91596412Y-114395538D02* +X91739269Y-114347919D01* +X91739269Y-114347919D02* +X91834507Y-114347919D01* +X91834507Y-114347919D02* +X91977364Y-114395538D01* +X91977364Y-114395538D02* +X92024983Y-114443157D01* +X92929745Y-114347919D02* +X92453555Y-114347919D01* +X92453555Y-114347919D02* +X92405936Y-114824109D01* +X92405936Y-114824109D02* +X92453555Y-114776490D01* +X92453555Y-114776490D02* +X92548793Y-114728871D01* +X92548793Y-114728871D02* +X92786888Y-114728871D01* +X92786888Y-114728871D02* +X92882126Y-114776490D01* +X92882126Y-114776490D02* +X92929745Y-114824109D01* +X92929745Y-114824109D02* +X92977364Y-114919347D01* +X92977364Y-114919347D02* +X92977364Y-115157442D01* +X92977364Y-115157442D02* +X92929745Y-115252680D01* +X92929745Y-115252680D02* +X92882126Y-115300300D01* +X92882126Y-115300300D02* +X92786888Y-115347919D01* +X92786888Y-115347919D02* +X92548793Y-115347919D01* +X92548793Y-115347919D02* +X92453555Y-115300300D01* +X92453555Y-115300300D02* +X92405936Y-115252680D01* +X106749983Y-111347919D02* +X106416650Y-110871728D01* +X106178555Y-111347919D02* +X106178555Y-110347919D01* +X106178555Y-110347919D02* +X106559507Y-110347919D01* +X106559507Y-110347919D02* +X106654745Y-110395538D01* +X106654745Y-110395538D02* +X106702364Y-110443157D01* +X106702364Y-110443157D02* +X106749983Y-110538395D01* +X106749983Y-110538395D02* +X106749983Y-110681252D01* +X106749983Y-110681252D02* +X106702364Y-110776490D01* +X106702364Y-110776490D02* +X106654745Y-110824109D01* +X106654745Y-110824109D02* +X106559507Y-110871728D01* +X106559507Y-110871728D02* +X106178555Y-110871728D01* +X107321412Y-110776490D02* +X107226174Y-110728871D01* +X107226174Y-110728871D02* +X107178555Y-110681252D01* +X107178555Y-110681252D02* +X107130936Y-110586014D01* +X107130936Y-110586014D02* +X107130936Y-110538395D01* +X107130936Y-110538395D02* +X107178555Y-110443157D01* +X107178555Y-110443157D02* +X107226174Y-110395538D01* +X107226174Y-110395538D02* +X107321412Y-110347919D01* +X107321412Y-110347919D02* +X107511888Y-110347919D01* +X107511888Y-110347919D02* +X107607126Y-110395538D01* +X107607126Y-110395538D02* +X107654745Y-110443157D01* +X107654745Y-110443157D02* +X107702364Y-110538395D01* +X107702364Y-110538395D02* +X107702364Y-110586014D01* +X107702364Y-110586014D02* +X107654745Y-110681252D01* +X107654745Y-110681252D02* +X107607126Y-110728871D01* +X107607126Y-110728871D02* +X107511888Y-110776490D01* +X107511888Y-110776490D02* +X107321412Y-110776490D01* +X107321412Y-110776490D02* +X107226174Y-110824109D01* +X107226174Y-110824109D02* +X107178555Y-110871728D01* +X107178555Y-110871728D02* +X107130936Y-110966966D01* +X107130936Y-110966966D02* +X107130936Y-111157442D01* +X107130936Y-111157442D02* +X107178555Y-111252680D01* +X107178555Y-111252680D02* +X107226174Y-111300300D01* +X107226174Y-111300300D02* +X107321412Y-111347919D01* +X107321412Y-111347919D02* +X107511888Y-111347919D01* +X107511888Y-111347919D02* +X107607126Y-111300300D01* +X107607126Y-111300300D02* +X107654745Y-111252680D01* +X107654745Y-111252680D02* +X107702364Y-111157442D01* +X107702364Y-111157442D02* +X107702364Y-110966966D01* +X107702364Y-110966966D02* +X107654745Y-110871728D01* +X107654745Y-110871728D02* +X107607126Y-110824109D01* +X107607126Y-110824109D02* +X107511888Y-110776490D01* +X118273792Y-111252680D02* +X118226173Y-111300300D01* +X118226173Y-111300300D02* +X118083316Y-111347919D01* +X118083316Y-111347919D02* +X117988078Y-111347919D01* +X117988078Y-111347919D02* +X117845221Y-111300300D01* +X117845221Y-111300300D02* +X117749983Y-111205061D01* +X117749983Y-111205061D02* +X117702364Y-111109823D01* +X117702364Y-111109823D02* +X117654745Y-110919347D01* +X117654745Y-110919347D02* +X117654745Y-110776490D01* +X117654745Y-110776490D02* +X117702364Y-110586014D01* +X117702364Y-110586014D02* +X117749983Y-110490776D01* +X117749983Y-110490776D02* +X117845221Y-110395538D01* +X117845221Y-110395538D02* +X117988078Y-110347919D01* +X117988078Y-110347919D02* +X118083316Y-110347919D01* +X118083316Y-110347919D02* +X118226173Y-110395538D01* +X118226173Y-110395538D02* +X118273792Y-110443157D01* +X118654745Y-110443157D02* +X118702364Y-110395538D01* +X118702364Y-110395538D02* +X118797602Y-110347919D01* +X118797602Y-110347919D02* +X119035697Y-110347919D01* +X119035697Y-110347919D02* +X119130935Y-110395538D01* +X119130935Y-110395538D02* +X119178554Y-110443157D01* +X119178554Y-110443157D02* +X119226173Y-110538395D01* +X119226173Y-110538395D02* +X119226173Y-110633633D01* +X119226173Y-110633633D02* +X119178554Y-110776490D01* +X119178554Y-110776490D02* +X118607126Y-111347919D01* +X118607126Y-111347919D02* +X119226173Y-111347919D01* +X120083316Y-110681252D02* +X120083316Y-111347919D01* +X119845221Y-110300300D02* +X119607126Y-111014585D01* +X119607126Y-111014585D02* +X120226173Y-111014585D01* +X134223792Y-94347919D02* +X133890459Y-93871728D01* +X133652364Y-94347919D02* +X133652364Y-93347919D01* +X133652364Y-93347919D02* +X134033316Y-93347919D01* +X134033316Y-93347919D02* +X134128554Y-93395538D01* +X134128554Y-93395538D02* +X134176173Y-93443157D01* +X134176173Y-93443157D02* +X134223792Y-93538395D01* +X134223792Y-93538395D02* +X134223792Y-93681252D01* +X134223792Y-93681252D02* +X134176173Y-93776490D01* +X134176173Y-93776490D02* +X134128554Y-93824109D01* +X134128554Y-93824109D02* +X134033316Y-93871728D01* +X134033316Y-93871728D02* +X133652364Y-93871728D01* +X135128554Y-93347919D02* +X134652364Y-93347919D01* +X134652364Y-93347919D02* +X134604745Y-93824109D01* +X134604745Y-93824109D02* +X134652364Y-93776490D01* +X134652364Y-93776490D02* +X134747602Y-93728871D01* +X134747602Y-93728871D02* +X134985697Y-93728871D01* +X134985697Y-93728871D02* +X135080935Y-93776490D01* +X135080935Y-93776490D02* +X135128554Y-93824109D01* +X135128554Y-93824109D02* +X135176173Y-93919347D01* +X135176173Y-93919347D02* +X135176173Y-94157442D01* +X135176173Y-94157442D02* +X135128554Y-94252680D01* +X135128554Y-94252680D02* +X135080935Y-94300300D01* +X135080935Y-94300300D02* +X134985697Y-94347919D01* +X134985697Y-94347919D02* +X134747602Y-94347919D01* +X134747602Y-94347919D02* +X134652364Y-94300300D01* +X134652364Y-94300300D02* +X134604745Y-94252680D01* +X136033316Y-93681252D02* +X136033316Y-94347919D01* +X135795221Y-93300300D02* +X135557126Y-94014585D01* +X135557126Y-94014585D02* +X136176173Y-94014585D01* +X134223792Y-98847919D02* +X133890459Y-98371728D01* +X133652364Y-98847919D02* +X133652364Y-97847919D01* +X133652364Y-97847919D02* +X134033316Y-97847919D01* +X134033316Y-97847919D02* +X134128554Y-97895538D01* +X134128554Y-97895538D02* +X134176173Y-97943157D01* +X134176173Y-97943157D02* +X134223792Y-98038395D01* +X134223792Y-98038395D02* +X134223792Y-98181252D01* +X134223792Y-98181252D02* +X134176173Y-98276490D01* +X134176173Y-98276490D02* +X134128554Y-98324109D01* +X134128554Y-98324109D02* +X134033316Y-98371728D01* +X134033316Y-98371728D02* +X133652364Y-98371728D01* +X135128554Y-97847919D02* +X134652364Y-97847919D01* +X134652364Y-97847919D02* +X134604745Y-98324109D01* +X134604745Y-98324109D02* +X134652364Y-98276490D01* +X134652364Y-98276490D02* +X134747602Y-98228871D01* +X134747602Y-98228871D02* +X134985697Y-98228871D01* +X134985697Y-98228871D02* +X135080935Y-98276490D01* +X135080935Y-98276490D02* +X135128554Y-98324109D01* +X135128554Y-98324109D02* +X135176173Y-98419347D01* +X135176173Y-98419347D02* +X135176173Y-98657442D01* +X135176173Y-98657442D02* +X135128554Y-98752680D01* +X135128554Y-98752680D02* +X135080935Y-98800300D01* +X135080935Y-98800300D02* +X134985697Y-98847919D01* +X134985697Y-98847919D02* +X134747602Y-98847919D01* +X134747602Y-98847919D02* +X134652364Y-98800300D01* +X134652364Y-98800300D02* +X134604745Y-98752680D01* +X135509507Y-97847919D02* +X136176173Y-97847919D01* +X136176173Y-97847919D02* +X135747602Y-98847919D01* +X111723792Y-101347919D02* +X111390459Y-100871728D01* +X111152364Y-101347919D02* +X111152364Y-100347919D01* +X111152364Y-100347919D02* +X111533316Y-100347919D01* +X111533316Y-100347919D02* +X111628554Y-100395538D01* +X111628554Y-100395538D02* +X111676173Y-100443157D01* +X111676173Y-100443157D02* +X111723792Y-100538395D01* +X111723792Y-100538395D02* +X111723792Y-100681252D01* +X111723792Y-100681252D02* +X111676173Y-100776490D01* +X111676173Y-100776490D02* +X111628554Y-100824109D01* +X111628554Y-100824109D02* +X111533316Y-100871728D01* +X111533316Y-100871728D02* +X111152364Y-100871728D01* +X112628554Y-100347919D02* +X112152364Y-100347919D01* +X112152364Y-100347919D02* +X112104745Y-100824109D01* +X112104745Y-100824109D02* +X112152364Y-100776490D01* +X112152364Y-100776490D02* +X112247602Y-100728871D01* +X112247602Y-100728871D02* +X112485697Y-100728871D01* +X112485697Y-100728871D02* +X112580935Y-100776490D01* +X112580935Y-100776490D02* +X112628554Y-100824109D01* +X112628554Y-100824109D02* +X112676173Y-100919347D01* +X112676173Y-100919347D02* +X112676173Y-101157442D01* +X112676173Y-101157442D02* +X112628554Y-101252680D01* +X112628554Y-101252680D02* +X112580935Y-101300300D01* +X112580935Y-101300300D02* +X112485697Y-101347919D01* +X112485697Y-101347919D02* +X112247602Y-101347919D01* +X112247602Y-101347919D02* +X112152364Y-101300300D01* +X112152364Y-101300300D02* +X112104745Y-101252680D01* +X113295221Y-100347919D02* +X113390459Y-100347919D01* +X113390459Y-100347919D02* +X113485697Y-100395538D01* +X113485697Y-100395538D02* +X113533316Y-100443157D01* +X113533316Y-100443157D02* +X113580935Y-100538395D01* +X113580935Y-100538395D02* +X113628554Y-100728871D01* +X113628554Y-100728871D02* +X113628554Y-100966966D01* +X113628554Y-100966966D02* +X113580935Y-101157442D01* +X113580935Y-101157442D02* +X113533316Y-101252680D01* +X113533316Y-101252680D02* +X113485697Y-101300300D01* +X113485697Y-101300300D02* +X113390459Y-101347919D01* +X113390459Y-101347919D02* +X113295221Y-101347919D01* +X113295221Y-101347919D02* +X113199983Y-101300300D01* +X113199983Y-101300300D02* +X113152364Y-101252680D01* +X113152364Y-101252680D02* +X113104745Y-101157442D01* +X113104745Y-101157442D02* +X113057126Y-100966966D01* +X113057126Y-100966966D02* +X113057126Y-100728871D01* +X113057126Y-100728871D02* +X113104745Y-100538395D01* +X113104745Y-100538395D02* +X113152364Y-100443157D01* +X113152364Y-100443157D02* +X113199983Y-100395538D01* +X113199983Y-100395538D02* +X113295221Y-100347919D01* +X186896412Y-101777919D02* +X186896412Y-100777919D01* +X186896412Y-100777919D02* +X187134507Y-100777919D01* +X187134507Y-100777919D02* +X187277364Y-100825538D01* +X187277364Y-100825538D02* +X187372602Y-100920776D01* +X187372602Y-100920776D02* +X187420221Y-101016014D01* +X187420221Y-101016014D02* +X187467840Y-101206490D01* +X187467840Y-101206490D02* +X187467840Y-101349347D01* +X187467840Y-101349347D02* +X187420221Y-101539823D01* +X187420221Y-101539823D02* +X187372602Y-101635061D01* +X187372602Y-101635061D02* +X187277364Y-101730300D01* +X187277364Y-101730300D02* +X187134507Y-101777919D01* +X187134507Y-101777919D02* +X186896412Y-101777919D01* +X187896412Y-101777919D02* +X187896412Y-100777919D01* +X187896412Y-101158871D02* +X187991650Y-101111252D01* +X187991650Y-101111252D02* +X188182126Y-101111252D01* +X188182126Y-101111252D02* +X188277364Y-101158871D01* +X188277364Y-101158871D02* +X188324983Y-101206490D01* +X188324983Y-101206490D02* +X188372602Y-101301728D01* +X188372602Y-101301728D02* +X188372602Y-101587442D01* +X188372602Y-101587442D02* +X188324983Y-101682680D01* +X188324983Y-101682680D02* +X188277364Y-101730300D01* +X188277364Y-101730300D02* +X188182126Y-101777919D01* +X188182126Y-101777919D02* +X187991650Y-101777919D01* +X187991650Y-101777919D02* +X187896412Y-101730300D01* +X188801174Y-101777919D02* +X188801174Y-100777919D01* +X188896412Y-101396966D02* +X189182126Y-101777919D01* +X189182126Y-101111252D02* +X188801174Y-101492204D01* +X189563079Y-100873157D02* +X189610698Y-100825538D01* +X189610698Y-100825538D02* +X189705936Y-100777919D01* +X189705936Y-100777919D02* +X189944031Y-100777919D01* +X189944031Y-100777919D02* +X190039269Y-100825538D01* +X190039269Y-100825538D02* +X190086888Y-100873157D01* +X190086888Y-100873157D02* +X190134507Y-100968395D01* +X190134507Y-100968395D02* +X190134507Y-101063633D01* +X190134507Y-101063633D02* +X190086888Y-101206490D01* +X190086888Y-101206490D02* +X189515460Y-101777919D01* +X189515460Y-101777919D02* +X190134507Y-101777919D01* +X126429745Y-85129919D02* +X127001173Y-85129919D01* +X126715459Y-86129919D02* +X126715459Y-85129919D01* +X127334507Y-86129919D02* +X127334507Y-85129919D01* +X127334507Y-85129919D02* +X127715459Y-85129919D01* +X127715459Y-85129919D02* +X127810697Y-85177538D01* +X127810697Y-85177538D02* +X127858316Y-85225157D01* +X127858316Y-85225157D02* +X127905935Y-85320395D01* +X127905935Y-85320395D02* +X127905935Y-85463252D01* +X127905935Y-85463252D02* +X127858316Y-85558490D01* +X127858316Y-85558490D02* +X127810697Y-85606109D01* +X127810697Y-85606109D02* +X127715459Y-85653728D01* +X127715459Y-85653728D02* +X127334507Y-85653728D01* +X128286888Y-85225157D02* +X128334507Y-85177538D01* +X128334507Y-85177538D02* +X128429745Y-85129919D01* +X128429745Y-85129919D02* +X128667840Y-85129919D01* +X128667840Y-85129919D02* +X128763078Y-85177538D01* +X128763078Y-85177538D02* +X128810697Y-85225157D01* +X128810697Y-85225157D02* +X128858316Y-85320395D01* +X128858316Y-85320395D02* +X128858316Y-85415633D01* +X128858316Y-85415633D02* +X128810697Y-85558490D01* +X128810697Y-85558490D02* +X128239269Y-86129919D01* +X128239269Y-86129919D02* +X128858316Y-86129919D01* +X136297602Y-111252680D02* +X136249983Y-111300300D01* +X136249983Y-111300300D02* +X136107126Y-111347919D01* +X136107126Y-111347919D02* +X136011888Y-111347919D01* +X136011888Y-111347919D02* +X135869031Y-111300300D01* +X135869031Y-111300300D02* +X135773793Y-111205061D01* +X135773793Y-111205061D02* +X135726174Y-111109823D01* +X135726174Y-111109823D02* +X135678555Y-110919347D01* +X135678555Y-110919347D02* +X135678555Y-110776490D01* +X135678555Y-110776490D02* +X135726174Y-110586014D01* +X135726174Y-110586014D02* +X135773793Y-110490776D01* +X135773793Y-110490776D02* +X135869031Y-110395538D01* +X135869031Y-110395538D02* +X136011888Y-110347919D01* +X136011888Y-110347919D02* +X136107126Y-110347919D01* +X136107126Y-110347919D02* +X136249983Y-110395538D01* +X136249983Y-110395538D02* +X136297602Y-110443157D01* +X137154745Y-110681252D02* +X137154745Y-111347919D01* +X136726174Y-110681252D02* +X136726174Y-111205061D01* +X136726174Y-111205061D02* +X136773793Y-111300300D01* +X136773793Y-111300300D02* +X136869031Y-111347919D01* +X136869031Y-111347919D02* +X137011888Y-111347919D01* +X137011888Y-111347919D02* +X137107126Y-111300300D01* +X137107126Y-111300300D02* +X137154745Y-111252680D01* +X138059507Y-110681252D02* +X138059507Y-111347919D01* +X137821412Y-110300300D02* +X137583317Y-111014585D01* +X137583317Y-111014585D02* +X138202364Y-111014585D01* +X179098792Y-49902680D02* +X179051173Y-49950300D01* +X179051173Y-49950300D02* +X178908316Y-49997919D01* +X178908316Y-49997919D02* +X178813078Y-49997919D01* +X178813078Y-49997919D02* +X178670221Y-49950300D01* +X178670221Y-49950300D02* +X178574983Y-49855061D01* +X178574983Y-49855061D02* +X178527364Y-49759823D01* +X178527364Y-49759823D02* +X178479745Y-49569347D01* +X178479745Y-49569347D02* +X178479745Y-49426490D01* +X178479745Y-49426490D02* +X178527364Y-49236014D01* +X178527364Y-49236014D02* +X178574983Y-49140776D01* +X178574983Y-49140776D02* +X178670221Y-49045538D01* +X178670221Y-49045538D02* +X178813078Y-48997919D01* +X178813078Y-48997919D02* +X178908316Y-48997919D01* +X178908316Y-48997919D02* +X179051173Y-49045538D01* +X179051173Y-49045538D02* +X179098792Y-49093157D01* +X179479745Y-49093157D02* +X179527364Y-49045538D01* +X179527364Y-49045538D02* +X179622602Y-48997919D01* +X179622602Y-48997919D02* +X179860697Y-48997919D01* +X179860697Y-48997919D02* +X179955935Y-49045538D01* +X179955935Y-49045538D02* +X180003554Y-49093157D01* +X180003554Y-49093157D02* +X180051173Y-49188395D01* +X180051173Y-49188395D02* +X180051173Y-49283633D01* +X180051173Y-49283633D02* +X180003554Y-49426490D01* +X180003554Y-49426490D02* +X179432126Y-49997919D01* +X179432126Y-49997919D02* +X180051173Y-49997919D01* +X180384507Y-48997919D02* +X181003554Y-48997919D01* +X181003554Y-48997919D02* +X180670221Y-49378871D01* +X180670221Y-49378871D02* +X180813078Y-49378871D01* +X180813078Y-49378871D02* +X180908316Y-49426490D01* +X180908316Y-49426490D02* +X180955935Y-49474109D01* +X180955935Y-49474109D02* +X181003554Y-49569347D01* +X181003554Y-49569347D02* +X181003554Y-49807442D01* +X181003554Y-49807442D02* +X180955935Y-49902680D01* +X180955935Y-49902680D02* +X180908316Y-49950300D01* +X180908316Y-49950300D02* +X180813078Y-49997919D01* +X180813078Y-49997919D02* +X180527364Y-49997919D01* +X180527364Y-49997919D02* +X180432126Y-49950300D01* +X180432126Y-49950300D02* +X180384507Y-49902680D01* +X140558316Y-87977919D02* +X140558316Y-88692204D01* +X140558316Y-88692204D02* +X140510697Y-88835061D01* +X140510697Y-88835061D02* +X140415459Y-88930300D01* +X140415459Y-88930300D02* +X140272602Y-88977919D01* +X140272602Y-88977919D02* +X140177364Y-88977919D01* +X141034507Y-88977919D02* +X141034507Y-87977919D01* +X141034507Y-87977919D02* +X141415459Y-87977919D01* +X141415459Y-87977919D02* +X141510697Y-88025538D01* +X141510697Y-88025538D02* +X141558316Y-88073157D01* +X141558316Y-88073157D02* +X141605935Y-88168395D01* +X141605935Y-88168395D02* +X141605935Y-88311252D01* +X141605935Y-88311252D02* +X141558316Y-88406490D01* +X141558316Y-88406490D02* +X141510697Y-88454109D01* +X141510697Y-88454109D02* +X141415459Y-88501728D01* +X141415459Y-88501728D02* +X141034507Y-88501728D01* +X141986888Y-88073157D02* +X142034507Y-88025538D01* +X142034507Y-88025538D02* +X142129745Y-87977919D01* +X142129745Y-87977919D02* +X142367840Y-87977919D01* +X142367840Y-87977919D02* +X142463078Y-88025538D01* +X142463078Y-88025538D02* +X142510697Y-88073157D01* +X142510697Y-88073157D02* +X142558316Y-88168395D01* +X142558316Y-88168395D02* +X142558316Y-88263633D01* +X142558316Y-88263633D02* +X142510697Y-88406490D01* +X142510697Y-88406490D02* +X141939269Y-88977919D01* +X141939269Y-88977919D02* +X142558316Y-88977919D01* +X198953555Y-64277919D02* +X198953555Y-63277919D01* +X198953555Y-63277919D02* +X199191650Y-63277919D01* +X199191650Y-63277919D02* +X199334507Y-63325538D01* +X199334507Y-63325538D02* +X199429745Y-63420776D01* +X199429745Y-63420776D02* +X199477364Y-63516014D01* +X199477364Y-63516014D02* +X199524983Y-63706490D01* +X199524983Y-63706490D02* +X199524983Y-63849347D01* +X199524983Y-63849347D02* +X199477364Y-64039823D01* +X199477364Y-64039823D02* +X199429745Y-64135061D01* +X199429745Y-64135061D02* +X199334507Y-64230300D01* +X199334507Y-64230300D02* +X199191650Y-64277919D01* +X199191650Y-64277919D02* +X198953555Y-64277919D01* +X200382126Y-63277919D02* +X200191650Y-63277919D01* +X200191650Y-63277919D02* +X200096412Y-63325538D01* +X200096412Y-63325538D02* +X200048793Y-63373157D01* +X200048793Y-63373157D02* +X199953555Y-63516014D01* +X199953555Y-63516014D02* +X199905936Y-63706490D01* +X199905936Y-63706490D02* +X199905936Y-64087442D01* +X199905936Y-64087442D02* +X199953555Y-64182680D01* +X199953555Y-64182680D02* +X200001174Y-64230300D01* +X200001174Y-64230300D02* +X200096412Y-64277919D01* +X200096412Y-64277919D02* +X200286888Y-64277919D01* +X200286888Y-64277919D02* +X200382126Y-64230300D01* +X200382126Y-64230300D02* +X200429745Y-64182680D01* +X200429745Y-64182680D02* +X200477364Y-64087442D01* +X200477364Y-64087442D02* +X200477364Y-63849347D01* +X200477364Y-63849347D02* +X200429745Y-63754109D01* +X200429745Y-63754109D02* +X200382126Y-63706490D01* +X200382126Y-63706490D02* +X200286888Y-63658871D01* +X200286888Y-63658871D02* +X200096412Y-63658871D01* +X200096412Y-63658871D02* +X200001174Y-63706490D01* +X200001174Y-63706490D02* +X199953555Y-63754109D01* +X199953555Y-63754109D02* +X199905936Y-63849347D01* +X201661905Y-90754819D02* +X201661905Y-89754819D01* +X201661905Y-89754819D02* +X201900000Y-89754819D01* +X201900000Y-89754819D02* +X202042857Y-89802438D01* +X202042857Y-89802438D02* +X202138095Y-89897676D01* +X202138095Y-89897676D02* +X202185714Y-89992914D01* +X202185714Y-89992914D02* +X202233333Y-90183390D01* +X202233333Y-90183390D02* +X202233333Y-90326247D01* +X202233333Y-90326247D02* +X202185714Y-90516723D01* +X202185714Y-90516723D02* +X202138095Y-90611961D01* +X202138095Y-90611961D02* +X202042857Y-90707200D01* +X202042857Y-90707200D02* +X201900000Y-90754819D01* +X201900000Y-90754819D02* +X201661905Y-90754819D01* +X203090476Y-90088152D02* +X203090476Y-90754819D01* +X202852381Y-89707200D02* +X202614286Y-90421485D01* +X202614286Y-90421485D02* +X203233333Y-90421485D01* +X204138095Y-89802438D02* +X204042857Y-89754819D01* +X204042857Y-89754819D02* +X203900000Y-89754819D01* +X203900000Y-89754819D02* +X203757143Y-89802438D01* +X203757143Y-89802438D02* +X203661905Y-89897676D01* +X203661905Y-89897676D02* +X203614286Y-89992914D01* +X203614286Y-89992914D02* +X203566667Y-90183390D01* +X203566667Y-90183390D02* +X203566667Y-90326247D01* +X203566667Y-90326247D02* +X203614286Y-90516723D01* +X203614286Y-90516723D02* +X203661905Y-90611961D01* +X203661905Y-90611961D02* +X203757143Y-90707200D01* +X203757143Y-90707200D02* +X203900000Y-90754819D01* +X203900000Y-90754819D02* +X203995238Y-90754819D01* +X203995238Y-90754819D02* +X204138095Y-90707200D01* +X204138095Y-90707200D02* +X204185714Y-90659580D01* +X204185714Y-90659580D02* +X204185714Y-90326247D01* +X204185714Y-90326247D02* +X203995238Y-90326247D01* +X167524983Y-123977919D02* +X167048793Y-123977919D01* +X167048793Y-123977919D02* +X167048793Y-122977919D01* +X167763079Y-122977919D02* +X168429745Y-122977919D01* +X168429745Y-122977919D02* +X168001174Y-123977919D01* +%TO.C,R2*% +D18* +X167129392Y-58800600D02* +X167603908Y-58800600D01* +X167129392Y-59845600D02* +X167603908Y-59845600D01* +%TO.C,P13*% +X113341650Y-43573100D02* +X113341650Y-44823100D01* +X113641650Y-46123100D02* +X114391650Y-46123100D01* +X114391650Y-46123100D02* +X114391650Y-49073100D01* +X114391650Y-49073100D02* +X118691650Y-49073100D01* +X114591650Y-43573100D02* +X113341650Y-43573100D01* +X122991650Y-46123100D02* +X122991650Y-49073100D01* +X122991650Y-49073100D02* +X118691650Y-49073100D01* +X123741650Y-46123100D02* +X122991650Y-46123100D01* +X113631650Y-43863100D02* +X123751650Y-43863100D01* +X123751650Y-49833100D01* +X113631650Y-49833100D01* +X113631650Y-43863100D01* +X113641650Y-43873100D02* +X115441650Y-43873100D01* +X115441650Y-44623100D01* +X113641650Y-44623100D01* +X113641650Y-43873100D01* +X116941650Y-43873100D02* +X120441650Y-43873100D01* +X120441650Y-44623100D01* +X116941650Y-44623100D01* +X116941650Y-43873100D01* +X121941650Y-43873100D02* +X123741650Y-43873100D01* +X123741650Y-44623100D01* +X121941650Y-44623100D01* +X121941650Y-43873100D01* +%TO.C,Rigb*% +X101603908Y-73800600D02* +X101129392Y-73800600D01* +X101603908Y-74845600D02* +X101129392Y-74845600D01* +%TO.C,Dbk*% +X166541650Y-62313100D02* +X166541650Y-67823100D01* +X169841650Y-62313100D02* +X166541650Y-62313100D01* +X169841650Y-62313100D02* +X169841650Y-67823100D01* +%TO.C,P6*% +X207441650Y-63423100D02* +X207441650Y-64673100D01* +X207441650Y-64673100D02* +X208691650Y-64673100D01* +X209991650Y-51773100D02* +X209991650Y-52523100D01* +X209991650Y-52523100D02* +X212941650Y-52523100D01* +X209991650Y-63623100D02* +X212941650Y-63623100D01* +X209991650Y-64373100D02* +X209991650Y-63623100D01* +X212941650Y-52523100D02* +X212941650Y-58073100D01* +X212941650Y-63623100D02* +X212941650Y-58073100D01* +X207731650Y-51763100D02* +X213701650Y-51763100D01* +X213701650Y-64383100D01* +X207731650Y-64383100D01* +X207731650Y-51763100D01* +X207741650Y-51773100D02* +X208491650Y-51773100D01* +X208491650Y-53573100D01* +X207741650Y-53573100D01* +X207741650Y-51773100D01* +X207741650Y-55073100D02* +X208491650Y-55073100D01* +X208491650Y-61073100D01* +X207741650Y-61073100D01* +X207741650Y-55073100D01* +X207741650Y-62573100D02* +X208491650Y-62573100D01* +X208491650Y-64373100D01* +X207741650Y-64373100D01* +X207741650Y-62573100D01* +%TO.C,Ren2*% +X177954392Y-58800600D02* +X178428908Y-58800600D01* +X177954392Y-59845600D02* +X178428908Y-59845600D01* +%TO.C,DB2*% +X196569150Y-43363100D02* +X196569150Y-45283100D01* +X196569150Y-45283100D02* +X199254150Y-45283100D01* +X199254150Y-43363100D02* +X196569150Y-43363100D01* +%TO.C,P4*% +X207441650Y-109923100D02* +X207441650Y-111173100D01* +X207441650Y-111173100D02* +X208691650Y-111173100D01* +X209991650Y-100773100D02* +X209991650Y-101523100D01* +X209991650Y-101523100D02* +X212941650Y-101523100D01* +X209991650Y-110123100D02* +X212941650Y-110123100D01* +X209991650Y-110873100D02* +X209991650Y-110123100D01* +X212941650Y-101523100D02* +X212941650Y-105823100D01* +X212941650Y-110123100D02* +X212941650Y-105823100D01* +X207731650Y-100763100D02* +X213701650Y-100763100D01* +X213701650Y-110883100D01* +X207731650Y-110883100D01* +X207731650Y-100763100D01* +X207741650Y-100773100D02* +X208491650Y-100773100D01* +X208491650Y-102573100D01* +X207741650Y-102573100D01* +X207741650Y-100773100D01* +X207741650Y-104073100D02* +X208491650Y-104073100D01* +X208491650Y-107573100D01* +X207741650Y-107573100D01* +X207741650Y-104073100D01* +X207741650Y-109073100D02* +X208491650Y-109073100D01* +X208491650Y-110873100D01* +X207741650Y-110873100D01* +X207741650Y-109073100D01* +%TO.C,P10*% +X207416650Y-81673100D02* +X207416650Y-82923100D01* +X207416650Y-82923100D02* +X208666650Y-82923100D01* +X209966650Y-75023100D02* +X209966650Y-75773100D01* +X209966650Y-75773100D02* +X212916650Y-75773100D01* +X209966650Y-81873100D02* +X212916650Y-81873100D01* +X209966650Y-82623100D02* +X209966650Y-81873100D01* +X212916650Y-75773100D02* +X212916650Y-78823100D01* +X212916650Y-81873100D02* +X212916650Y-78823100D01* +X207706650Y-75013100D02* +X213676650Y-75013100D01* +X213676650Y-82633100D01* +X207706650Y-82633100D01* +X207706650Y-75013100D01* +X207716650Y-75023100D02* +X208466650Y-75023100D01* +X208466650Y-76823100D01* +X207716650Y-76823100D01* +X207716650Y-75023100D01* +X207716650Y-78323100D02* +X208466650Y-78323100D01* +X208466650Y-79323100D01* +X207716650Y-79323100D01* +X207716650Y-78323100D01* +X207716650Y-80823100D02* +X208466650Y-80823100D01* +X208466650Y-82623100D01* +X207716650Y-82623100D01* +X207716650Y-80823100D01* +%TO.C,Ccomp*% +X175331650Y-53332520D02* +X175331650Y-53613680D01* +X176351650Y-53332520D02* +X176351650Y-53613680D01* +%TO.C,U7*% +X195561650Y-110013100D02* +X199681650Y-110013100D01* +X195561650Y-110108100D02* +X195561650Y-110013100D01* +X195561650Y-115133100D02* +X195561650Y-115038100D01* +X199681650Y-110013100D02* +X199681650Y-110108100D01* +X199681650Y-115038100D02* +X199681650Y-115133100D01* +X199681650Y-115133100D02* +X195561650Y-115133100D01* +X200221650Y-115043100D02* +X200461650Y-115373100D01* +X199981650Y-115373100D01* +X200221650Y-115043100D01* +G36* +X200461650Y-115373100D02* +G01* +X199981650Y-115373100D01* +X200221650Y-115043100D01* +X200461650Y-115373100D01* +G37* +%TO.C,DB1*% +X192569150Y-43363100D02* +X192569150Y-45283100D01* +X192569150Y-45283100D02* +X195254150Y-45283100D01* +X195254150Y-43363100D02* +X192569150Y-43363100D01* +%TO.C,J1*% +X105861650Y-54993100D02* +X107191650Y-54993100D01* +X105861650Y-56323100D02* +X105861650Y-54993100D01* +X108461650Y-54993100D02* +X156781650Y-54993100D01* +X108461650Y-57653100D02* +X108461650Y-54993100D01* +X108461650Y-57653100D02* +X156781650Y-57653100D01* +X156781650Y-57653100D02* +X156781650Y-54993100D01* +%TO.C,Ccomp2*% +X187826070Y-114313100D02* +X188107230Y-114313100D01* +X187826070Y-115333100D02* +X188107230Y-115333100D01* +%TO.C,R5*% +X92004392Y-111800600D02* +X92478908Y-111800600D01* +X92004392Y-112845600D02* +X92478908Y-112845600D01* +%TO.C,P11*% +X132941650Y-43573100D02* +X132941650Y-44823100D01* +X133241650Y-46123100D02* +X133991650Y-46123100D01* +X133991650Y-46123100D02* +X133991650Y-49073100D01* +X133991650Y-49073100D02* +X137041650Y-49073100D01* +X134191650Y-43573100D02* +X132941650Y-43573100D01* +X140091650Y-46123100D02* +X140091650Y-49073100D01* +X140091650Y-49073100D02* +X137041650Y-49073100D01* +X140841650Y-46123100D02* +X140091650Y-46123100D01* +X133231650Y-43863100D02* +X140851650Y-43863100D01* +X140851650Y-49833100D01* +X133231650Y-49833100D01* +X133231650Y-43863100D01* +X133241650Y-43873100D02* +X135041650Y-43873100D01* +X135041650Y-44623100D01* +X133241650Y-44623100D01* +X133241650Y-43873100D01* +X136541650Y-43873100D02* +X137541650Y-43873100D01* +X137541650Y-44623100D01* +X136541650Y-44623100D01* +X136541650Y-43873100D01* +X139041650Y-43873100D02* +X140841650Y-43873100D01* +X140841650Y-44623100D01* +X139041650Y-44623100D01* +X139041650Y-43873100D01* +%TO.C,Q1*% +X137890000Y-59340000D02* +X139410000Y-59340000D01* +X137890000Y-59390000D02* +X137890000Y-59340000D01* +X137890000Y-61290000D02* +X137890000Y-60510000D01* +X137890000Y-62460000D02* +X137890000Y-62410000D01* +X139410000Y-59340000D02* +X139410000Y-60340000D01* +X139410000Y-61460000D02* +X139410000Y-62460000D01* +X139410000Y-62460000D02* +X137890000Y-62460000D01* +X137350000Y-60520000D02* +X137590000Y-60850000D01* +X137110000Y-60850000D01* +X137350000Y-60520000D01* +G36* +X137590000Y-60850000D02* +G01* +X137110000Y-60850000D01* +X137350000Y-60520000D01* +X137590000Y-60850000D01* +G37* +%TO.C,Rg*% +X93954392Y-93800600D02* +X94428908Y-93800600D01* +X93954392Y-94845600D02* +X94428908Y-94845600D01* +%TO.C,Q7*% +X110656650Y-84668100D02* +X114776650Y-84668100D01* +X110656650Y-84763100D02* +X110656650Y-84668100D01* +X110656650Y-89788100D02* +X110656650Y-89693100D01* +X114776650Y-84668100D02* +X114776650Y-84763100D01* +X114776650Y-89693100D02* +X114776650Y-89788100D01* +X114776650Y-89788100D02* +X110656650Y-89788100D01* +X110116650Y-84758100D02* +X109876650Y-84428100D01* +X110356650Y-84428100D01* +X110116650Y-84758100D01* +G36* +X110116650Y-84758100D02* +G01* +X109876650Y-84428100D01* +X110356650Y-84428100D01* +X110116650Y-84758100D01* +G37* +%TO.C,C34*% +X130730398Y-103588100D02* +X131252902Y-103588100D01* +X130730398Y-105058100D02* +X131252902Y-105058100D01* +%TO.C,R31*% +X128679392Y-111800600D02* +X129153908Y-111800600D01* +X128679392Y-112845600D02* +X129153908Y-112845600D01* +%TO.C,Rfreq2*% +X179279392Y-111300600D02* +X179753908Y-111300600D01* +X179279392Y-112345600D02* +X179753908Y-112345600D01* +%TO.C,Rmled*% +X202812742Y-83927500D02* +X203287258Y-83927500D01* +X202812742Y-84972500D02* +X203287258Y-84972500D01* +%TO.C,U3*% +X123441650Y-117463100D02* +X124941650Y-117463100D01* +X123441650Y-119183100D02* +X124941650Y-119183100D01* +X122991650Y-117723100D02* +X122711650Y-117723100D01* +X122991650Y-117443100D01* +X122991650Y-117723100D01* +G36* +X122991650Y-117723100D02* +G01* +X122711650Y-117723100D01* +X122991650Y-117443100D01* +X122991650Y-117723100D01* +G37* +%TO.C,C40*% +X178956650Y-96061848D02* +X178956650Y-96584352D01* +X180426650Y-96061848D02* +X180426650Y-96584352D01* +%TO.C,J7*% +X173131650Y-75823100D02* +X173131650Y-93883100D01* +X173131650Y-75823100D02* +X175251650Y-75823100D01* +X173131650Y-93883100D02* +X175251650Y-93883100D01* +X174191650Y-73763100D02* +X175251650Y-73763100D01* +X175251650Y-73763100D02* +X175251650Y-74823100D01* +X175251650Y-75823100D02* +X175251650Y-93883100D01* +%TO.C,D2*% +X90681650Y-96673100D02* +X90681650Y-99973100D01* +X90681650Y-96673100D02* +X96191650Y-96673100D01* +X90681650Y-99973100D02* +X96191650Y-99973100D01* +%TO.C,RS1*% +X99464586Y-87413100D02* +X100918714Y-87413100D01* +X99464586Y-89233100D02* +X100918714Y-89233100D01* +%TO.C,Cu3*% +X132776070Y-111813100D02* +X133057230Y-111813100D01* +X132776070Y-112833100D02* +X133057230Y-112833100D01* +%TO.C,R3*% +X97629392Y-106800600D02* +X98103908Y-106800600D01* +X97629392Y-107845600D02* +X98103908Y-107845600D01* +%TO.C,R60*% +X179279392Y-101800600D02* +X179753908Y-101800600D01* +X179279392Y-102845600D02* +X179753908Y-102845600D01* +%TO.C,Rdfu*% +X110679392Y-111800600D02* +X111153908Y-111800600D01* +X110679392Y-112845600D02* +X111153908Y-112845600D01* +%TO.C,D10*% +X87531650Y-59673100D02* +X87531650Y-63973100D01* +X87531650Y-59673100D02* +X93341650Y-59673100D01* +X87531650Y-63973100D02* +X93341650Y-63973100D01* +%TO.C,Rcomp*% +X175319150Y-48385842D02* +X175319150Y-48860358D01* +X176364150Y-48385842D02* +X176364150Y-48860358D01* +%TO.C,Q5*% +X144690000Y-58640000D02* +X146210000Y-58640000D01* +X144690000Y-58690000D02* +X144690000Y-58640000D01* +X144690000Y-60590000D02* +X144690000Y-59810000D01* +X144690000Y-61760000D02* +X144690000Y-61710000D01* +X146210000Y-58640000D02* +X146210000Y-59640000D01* +X146210000Y-60760000D02* +X146210000Y-61760000D01* +X146210000Y-61760000D02* +X144690000Y-61760000D01* +X144150000Y-59820000D02* +X144390000Y-60150000D01* +X143910000Y-60150000D01* +X144150000Y-59820000D01* +G36* +X144390000Y-60150000D02* +G01* +X143910000Y-60150000D01* +X144150000Y-59820000D01* +X144390000Y-60150000D01* +G37* +%TO.C,C7*% +X96051070Y-115813100D02* +X96332230Y-115813100D01* +X96051070Y-116833100D02* +X96332230Y-116833100D01* +%TO.C,P2*% +X124341650Y-43573100D02* +X124341650Y-44823100D01* +X124641650Y-46123100D02* +X125391650Y-46123100D01* +X125391650Y-46123100D02* +X125391650Y-49073100D01* +X125391650Y-49073100D02* +X128441650Y-49073100D01* +X125591650Y-43573100D02* +X124341650Y-43573100D01* +X131491650Y-46123100D02* +X131491650Y-49073100D01* +X131491650Y-49073100D02* +X128441650Y-49073100D01* +X132241650Y-46123100D02* +X131491650Y-46123100D01* +X124631650Y-43863100D02* +X132251650Y-43863100D01* +X132251650Y-49833100D01* +X124631650Y-49833100D01* +X124631650Y-43863100D01* +X124641650Y-43873100D02* +X126441650Y-43873100D01* +X126441650Y-44623100D01* +X124641650Y-44623100D01* +X124641650Y-43873100D01* +X127941650Y-43873100D02* +X128941650Y-43873100D01* +X128941650Y-44623100D01* +X127941650Y-44623100D01* +X127941650Y-43873100D01* +X130441650Y-43873100D02* +X132241650Y-43873100D01* +X132241650Y-44623100D01* +X130441650Y-44623100D01* +X130441650Y-43873100D01* +%TO.C,R20*% +X173629392Y-44800600D02* +X174103908Y-44800600D01* +X173629392Y-45845600D02* +X174103908Y-45845600D01* +%TO.C,Cbst2*% +X187776070Y-109313100D02* +X188057230Y-109313100D01* +X187776070Y-110333100D02* +X188057230Y-110333100D01* +%TO.C,Rts*% +X96629392Y-101800600D02* +X97103908Y-101800600D01* +X96629392Y-102845600D02* +X97103908Y-102845600D01* +%TO.C,Q2*% +X105431650Y-94763100D02* +X106951650Y-94763100D01* +X105431650Y-94813100D02* +X105431650Y-94763100D01* +X105431650Y-96713100D02* +X105431650Y-95933100D01* +X105431650Y-97883100D02* +X105431650Y-97833100D01* +X106951650Y-94763100D02* +X106951650Y-95763100D01* +X106951650Y-96883100D02* +X106951650Y-97883100D01* +X106951650Y-97883100D02* +X105431650Y-97883100D01* +X104891650Y-95943100D02* +X105131650Y-96273100D01* +X104651650Y-96273100D01* +X104891650Y-95943100D01* +G36* +X105131650Y-96273100D02* +G01* +X104651650Y-96273100D01* +X104891650Y-95943100D01* +X105131650Y-96273100D01* +G37* +%TO.C,Cbst*% +X168276070Y-44813100D02* +X168557230Y-44813100D01* +X168276070Y-45833100D02* +X168557230Y-45833100D01* +%TO.C,H3*% +X109811650Y-44943100D02* +X111191650Y-44943100D01* +X109811650Y-46323100D02* +X109811650Y-44943100D01* +X109811650Y-47593100D02* +X109811650Y-52783100D01* +X109811650Y-47593100D02* +X112571650Y-47593100D01* +X109811650Y-52783100D02* +X112571650Y-52783100D01* +X112571650Y-47593100D02* +X112571650Y-52783100D01* +%TO.C,L6*% +X165641650Y-100673100D02* +X169741650Y-100673100D01* +X165641650Y-108973100D02* +X163541650Y-106873100D01* +X169741650Y-100673100D02* +X171841650Y-102773100D01* +X169741650Y-108973100D02* +X165641650Y-108973100D01* +X169741650Y-108973100D02* +X171841650Y-106873100D01* +%TO.C,C35*% +X129930398Y-95588100D02* +X130452902Y-95588100D01* +X129930398Y-97058100D02* +X130452902Y-97058100D01* +%TO.C,U4*% +X129886082Y-116738100D02* +X131021650Y-116738100D01* +X131021650Y-118608100D02* +X129601650Y-118608100D01* +X129591650Y-116733100D02* +X129451650Y-116543100D01* +X129731650Y-116543100D01* +X129591650Y-116733100D01* +G36* +X129591650Y-116733100D02* +G01* +X129451650Y-116543100D01* +X129731650Y-116543100D01* +X129591650Y-116733100D01* +G37* +%TO.C,RB3*% +X202016892Y-47800600D02* +X202491408Y-47800600D01* +X202016892Y-48845600D02* +X202491408Y-48845600D01* +%TO.C,TP1*% +X114141650Y-107323100D02* +G75* +G02* +X112241650Y-107323100I-950000J0D01* +G01* +X112241650Y-107323100D02* +G75* +G02* +X114141650Y-107323100I950000J0D01* +G01* +%TO.C,L2*% +X185241650Y-43673100D02* +X189341650Y-43673100D01* +X185241650Y-51973100D02* +X183141650Y-49873100D01* +X189341650Y-43673100D02* +X191441650Y-45773100D01* +X189341650Y-51973100D02* +X185241650Y-51973100D01* +X189341650Y-51973100D02* +X191441650Y-49873100D01* +%TO.C,C9*% +X101451070Y-82813100D02* +X101732230Y-82813100D01* +X101451070Y-83833100D02* +X101732230Y-83833100D01* +%TO.C,SW4G*% +X144975000Y-133600000D02* +X144975000Y-134800000D01* +X144975000Y-136400000D02* +X144975000Y-137600000D01* +X144975000Y-137600000D02* +X151375000Y-137600000D01* +X151375000Y-133600000D02* +X144975000Y-133600000D01* +X151375000Y-134800000D02* +X151375000Y-133600000D01* +X151375000Y-137600000D02* +X151375000Y-136400000D01* +%TO.C,J8*% +X195481650Y-75823100D02* +X195481650Y-93883100D01* +X195481650Y-75823100D02* +X197601650Y-75823100D01* +X195481650Y-93883100D02* +X197601650Y-93883100D01* +X196541650Y-73763100D02* +X197601650Y-73763100D01* +X197601650Y-73763100D02* +X197601650Y-74823100D01* +X197601650Y-75823100D02* +X197601650Y-93883100D01* +%TO.C,U2*% +X167156650Y-50168100D02* +X171276650Y-50168100D01* +X167156650Y-50263100D02* +X167156650Y-50168100D01* +X167156650Y-55288100D02* +X167156650Y-55193100D01* +X171276650Y-50168100D02* +X171276650Y-50263100D01* +X171276650Y-55193100D02* +X171276650Y-55288100D01* +X171276650Y-55288100D02* +X167156650Y-55288100D01* +X171816650Y-55198100D02* +X172056650Y-55528100D01* +X171576650Y-55528100D01* +X171816650Y-55198100D01* +G36* +X172056650Y-55528100D02* +G01* +X171576650Y-55528100D01* +X171816650Y-55198100D01* +X172056650Y-55528100D01* +G37* +%TO.C,RB4*% +X206016892Y-47800600D02* +X206491408Y-47800600D01* +X206016892Y-48845600D02* +X206491408Y-48845600D01* +%TO.C,C22*% +X160331650Y-46009352D02* +X160331650Y-44586848D01* +X163051650Y-46009352D02* +X163051650Y-44586848D01* +%TO.C,R61*% +X179279392Y-106800600D02* +X179753908Y-106800600D01* +X179279392Y-107845600D02* +X179753908Y-107845600D01* +%TO.C,Rcc1*% +X160902500Y-124987258D02* +X160902500Y-124512742D01* +X161947500Y-124987258D02* +X161947500Y-124512742D01* +%TO.C,R1*% +X163629392Y-58800600D02* +X164103908Y-58800600D01* +X163629392Y-59845600D02* +X164103908Y-59845600D01* +%TO.C,P5*% +X95341650Y-43573100D02* +X95341650Y-44823100D01* +X95641650Y-46123100D02* +X96391650Y-46123100D01* +X96391650Y-46123100D02* +X96391650Y-49073100D01* +X96391650Y-49073100D02* +X101941650Y-49073100D01* +X96591650Y-43573100D02* +X95341650Y-43573100D01* +X107491650Y-46123100D02* +X107491650Y-49073100D01* +X107491650Y-49073100D02* +X101941650Y-49073100D01* +X108241650Y-46123100D02* +X107491650Y-46123100D01* +X95631650Y-43863100D02* +X108251650Y-43863100D01* +X108251650Y-49833100D01* +X95631650Y-49833100D01* +X95631650Y-43863100D01* +X95641650Y-43873100D02* +X97441650Y-43873100D01* +X97441650Y-44623100D01* +X95641650Y-44623100D01* +X95641650Y-43873100D01* +X98941650Y-43873100D02* +X104941650Y-43873100D01* +X104941650Y-44623100D01* +X98941650Y-44623100D01* +X98941650Y-43873100D01* +X106441650Y-43873100D02* +X108241650Y-43873100D01* +X108241650Y-44623100D01* +X106441650Y-44623100D01* +X106441650Y-43873100D01* +%TO.C,DB3*% +X200569150Y-43363100D02* +X200569150Y-45283100D01* +X200569150Y-45283100D02* +X203254150Y-45283100D01* +X203254150Y-43363100D02* +X200569150Y-43363100D01* +%TO.C,C41*% +X197956650Y-103011848D02* +X197956650Y-103534352D01* +X199426650Y-103011848D02* +X199426650Y-103534352D01* +%TO.C,R55*% +X101629392Y-106800600D02* +X102103908Y-106800600D01* +X101629392Y-107845600D02* +X102103908Y-107845600D01* +%TO.C,Rled*% +X95179392Y-111800600D02* +X95653908Y-111800600D01* +X95179392Y-112845600D02* +X95653908Y-112845600D01* +%TO.C,JP4*% +X139341650Y-100123100D02* +X139341650Y-99523100D01* +X139891650Y-101323100D02* +X140491650Y-101323100D01* +X139991650Y-98823100D02* +X142791650Y-98823100D01* +X140191650Y-101023100D02* +X139891650Y-101323100D01* +X140191650Y-101023100D02* +X140491650Y-101323100D01* +X142791650Y-100823100D02* +X139991650Y-100823100D01* +X143441650Y-99523100D02* +X143441650Y-100123100D01* +X139341650Y-99523100D02* +G75* +G02* +X140041650Y-98823100I699999J1D01* +G01* +X140041650Y-100823100D02* +G75* +G02* +X139341650Y-100123100I-1J699999D01* +G01* +X142741650Y-98823100D02* +G75* +G02* +X143441650Y-99523100I0J-700000D01* +G01* +X143441650Y-100123100D02* +G75* +G02* +X142741650Y-100823100I-700000J0D01* +G01* +%TO.C,Rgs*% +X98954392Y-93800600D02* +X99428908Y-93800600D01* +X98954392Y-94845600D02* +X99428908Y-94845600D01* +%TO.C,P8*% +X207416650Y-72423100D02* +X207416650Y-73673100D01* +X207416650Y-73673100D02* +X208666650Y-73673100D01* +X209966650Y-65773100D02* +X209966650Y-66523100D01* +X209966650Y-66523100D02* +X212916650Y-66523100D01* +X209966650Y-72623100D02* +X212916650Y-72623100D01* +X209966650Y-73373100D02* +X209966650Y-72623100D01* +X212916650Y-66523100D02* +X212916650Y-69573100D01* +X212916650Y-72623100D02* +X212916650Y-69573100D01* +X207706650Y-65763100D02* +X213676650Y-65763100D01* +X213676650Y-73383100D01* +X207706650Y-73383100D01* +X207706650Y-65763100D01* +X207716650Y-65773100D02* +X208466650Y-65773100D01* +X208466650Y-67573100D01* +X207716650Y-67573100D01* +X207716650Y-65773100D01* +X207716650Y-69073100D02* +X208466650Y-69073100D01* +X208466650Y-70073100D01* +X207716650Y-70073100D01* +X207716650Y-69073100D01* +X207716650Y-71573100D02* +X208466650Y-71573100D01* +X208466650Y-73373100D01* +X207716650Y-73373100D01* +X207716650Y-71573100D01* +%TO.C,R41*% +X177954392Y-64300600D02* +X178428908Y-64300600D01* +X177954392Y-65345600D02* +X178428908Y-65345600D01* +%TO.C,DB4*% +X204569150Y-43363100D02* +X204569150Y-45283100D01* +X204569150Y-45283100D02* +X207254150Y-45283100D01* +X207254150Y-43363100D02* +X204569150Y-43363100D01* +%TO.C,RB2*% +X198016892Y-47800600D02* +X198491408Y-47800600D01* +X198016892Y-48845600D02* +X198491408Y-48845600D01* +%TO.C,Rcc2*% +X164877500Y-124987258D02* +X164877500Y-124512742D01* +X165922500Y-124987258D02* +X165922500Y-124512742D01* +%TO.C,D1*% +X98506650Y-115363100D02* +X98506650Y-117283100D01* +X98506650Y-117283100D02* +X101191650Y-117283100D01* +X101191650Y-115363100D02* +X98506650Y-115363100D01* +%TO.C,Rtp*% +X100629392Y-101800600D02* +X101103908Y-101800600D01* +X100629392Y-102845600D02* +X101103908Y-102845600D01* +%TO.C,JP1*% +X164141650Y-80623100D02* +X164141650Y-80023100D01* +X164841650Y-79323100D02* +X166241650Y-79323100D01* +X166241650Y-81323100D02* +X164841650Y-81323100D01* +X166941650Y-80023100D02* +X166941650Y-80623100D01* +X164141650Y-80023100D02* +G75* +G02* +X164841650Y-79323100I699999J1D01* +G01* +X164841650Y-81323100D02* +G75* +G02* +X164141650Y-80623100I-1J699999D01* +G01* +X166241650Y-79323100D02* +G75* +G02* +X166941650Y-80023100I0J-700000D01* +G01* +X166941650Y-80623100D02* +G75* +G02* +X166241650Y-81323100I-700000J0D01* +G01* +%TO.C,R30*% +X124679392Y-111800600D02* +X125153908Y-111800600D01* +X124679392Y-112845600D02* +X125153908Y-112845600D01* +%TO.C,R6*% +X98504392Y-111800600D02* +X98978908Y-111800600D01* +X98504392Y-112845600D02* +X98978908Y-112845600D01* +%TO.C,P12*% +X207441650Y-122923100D02* +X207441650Y-124173100D01* +X207441650Y-124173100D02* +X208691650Y-124173100D01* +X209991650Y-116273100D02* +X209991650Y-117023100D01* +X209991650Y-117023100D02* +X212941650Y-117023100D01* +X209991650Y-123123100D02* +X212941650Y-123123100D01* +X209991650Y-123873100D02* +X209991650Y-123123100D01* +X212941650Y-117023100D02* +X212941650Y-120073100D01* +X212941650Y-123123100D02* +X212941650Y-120073100D01* +X207731650Y-116263100D02* +X213701650Y-116263100D01* +X213701650Y-123883100D01* +X207731650Y-123883100D01* +X207731650Y-116263100D01* +X207741650Y-116273100D02* +X208491650Y-116273100D01* +X208491650Y-118073100D01* +X207741650Y-118073100D01* +X207741650Y-116273100D01* +X207741650Y-119573100D02* +X208491650Y-119573100D01* +X208491650Y-120573100D01* +X207741650Y-120573100D01* +X207741650Y-119573100D01* +X207741650Y-122073100D02* +X208491650Y-122073100D01* +X208491650Y-123873100D01* +X207741650Y-123873100D01* +X207741650Y-122073100D01* +%TO.C,C32*% +X119955398Y-102963100D02* +X121377902Y-102963100D01* +X119955398Y-105683100D02* +X121377902Y-105683100D01* +%TO.C,J9*% +X159555000Y-131825000D02* +X159555000Y-132725000D01* +X159555000Y-135425000D02* +X159555000Y-138155000D01* +X159555000Y-138155000D02* +X168745000Y-138155000D01* +X159675000Y-128745000D02* +X168625000Y-128745000D01* +X168745000Y-131825000D02* +X168745000Y-132725000D01* +X168745000Y-135425000D02* +X168745000Y-138155000D01* +%TO.C,Q4*% +X91994150Y-104263100D02* +X93514150Y-104263100D01* +X91994150Y-104313100D02* +X91994150Y-104263100D01* +X91994150Y-106213100D02* +X91994150Y-105433100D01* +X91994150Y-107383100D02* +X91994150Y-107333100D01* +X93514150Y-104263100D02* +X93514150Y-105263100D01* +X93514150Y-106383100D02* +X93514150Y-107383100D01* +X93514150Y-107383100D02* +X91994150Y-107383100D01* +X91454150Y-105443100D02* +X91694150Y-105773100D01* +X91214150Y-105773100D01* +X91454150Y-105443100D01* +G36* +X91694150Y-105773100D02* +G01* +X91214150Y-105773100D01* +X91454150Y-105443100D01* +X91694150Y-105773100D01* +G37* +%TO.C,P1*% +X170071650Y-128503100D02* +X195311650Y-128503100D01* +X170071650Y-131523100D02* +X195311650Y-131523100D01* +X170071650Y-136423100D02* +X195311650Y-136423100D01* +X170071650Y-137923100D02* +X195311650Y-137923100D01* +X170071650Y-138543100D02* +X170071650Y-128503100D01* +X172391650Y-138543100D02* +X170071650Y-138543100D01* +X195311650Y-128503100D02* +X195311650Y-138543100D01* +X195311650Y-138543100D02* +X172991650Y-138543100D01* +X172691650Y-138543100D02* +X173131650Y-139153100D01* +X172251650Y-139153100D01* +X172691650Y-138543100D01* +G36* +X173131650Y-139153100D02* +G01* +X172251650Y-139153100D01* +X172691650Y-138543100D01* +X173131650Y-139153100D01* +G37* +%TO.C,F1*% +X145805398Y-44613100D02* +X148577902Y-44613100D01* +X145805398Y-48033100D02* +X148577902Y-48033100D01* +%TO.C,R52*% +X108129392Y-101800600D02* +X108603908Y-101800600D01* +X108129392Y-102845600D02* +X108603908Y-102845600D01* +%TO.C,K1*% +X187684150Y-54365600D02* +X189884150Y-54365600D01* +X187684150Y-56465600D02* +X187684150Y-54365600D01* +X187884150Y-54565600D02* +X195684150Y-54565600D01* +X187884150Y-67265600D02* +X187884150Y-54565600D01* +X190046150Y-59548600D02* +X190046150Y-60183600D01* +X190046150Y-60183600D02* +X190706150Y-60183600D01* +X190706150Y-59675600D02* +X190706150Y-60691600D01* +X190706150Y-60691600D02* +X192611150Y-60691600D01* +X192230150Y-59675600D02* +X191595150Y-60691600D01* +X192611150Y-59675600D02* +X190706150Y-59675600D01* +X192611150Y-59675600D02* +X192611150Y-60691600D01* +X193246150Y-59548600D02* +X193246150Y-60183600D01* +X193246150Y-60183600D02* +X192611150Y-60183600D01* +X195684150Y-54565600D02* +X195684150Y-67265600D01* +X195684150Y-67265600D02* +X187884150Y-67265600D01* +%TO.C,J2*% +X105861650Y-72773100D02* +X107191650Y-72773100D01* +X105861650Y-74103100D02* +X105861650Y-72773100D01* +X108461650Y-72773100D02* +X156781650Y-72773100D01* +X108461650Y-75433100D02* +X108461650Y-72773100D01* +X108461650Y-75433100D02* +X156781650Y-75433100D01* +X156781650Y-75433100D02* +X156781650Y-72773100D01* +%TO.C,R56*% +X105629392Y-106800600D02* +X106103908Y-106800600D01* +X105629392Y-107845600D02* +X106103908Y-107845600D01* +%TO.C,C11*% +X162051070Y-50713100D02* +X162332230Y-50713100D01* +X162051070Y-51733100D02* +X162332230Y-51733100D01* +%TO.C,C43*% +X180754150Y-120475600D02* +X181541650Y-120475600D01* +X181147900Y-120081850D02* +X181147900Y-120869350D01* +X181781650Y-119977537D02* +X181781650Y-121263100D01* +X181781650Y-119977537D02* +X182846087Y-118913100D01* +X181781650Y-124668663D02* +X181781650Y-123383100D01* +X181781650Y-124668663D02* +X182846087Y-125733100D01* +X182846087Y-118913100D02* +X188601650Y-118913100D01* +X182846087Y-125733100D02* +X188601650Y-125733100D01* +X188601650Y-118913100D02* +X188601650Y-121263100D01* +X188601650Y-125733100D02* +X188601650Y-123383100D01* +%TO.C,DzG*% +X98431650Y-59763100D02* +X99951650Y-59763100D01* +X98431650Y-59813100D02* +X98431650Y-59763100D01* +X98431650Y-61713100D02* +X98431650Y-60933100D01* +X98431650Y-62883100D02* +X98431650Y-62833100D01* +X99951650Y-59763100D02* +X99951650Y-60763100D01* +X99951650Y-61883100D02* +X99951650Y-62883100D01* +X99951650Y-62883100D02* +X98431650Y-62883100D01* +X97891650Y-60943100D02* +X98131650Y-61273100D01* +X97651650Y-61273100D01* +X97891650Y-60943100D01* +G36* +X98131650Y-61273100D02* +G01* +X97651650Y-61273100D01* +X97891650Y-60943100D01* +X98131650Y-61273100D01* +G37* +%TO.C,R40*% +X177844150Y-69085842D02* +X177844150Y-69560358D01* +X178889150Y-69085842D02* +X178889150Y-69560358D01* +%TO.C,R42*% +X114679392Y-111800600D02* +X115153908Y-111800600D01* +X114679392Y-112845600D02* +X115153908Y-112845600D01* +%TO.C,U6*% +X119631650Y-91713100D02* +X120356650Y-91713100D01* +X119631650Y-92438100D02* +X119631650Y-91713100D01* +X119631650Y-96933100D02* +X119631650Y-96208100D01* +X120356650Y-96933100D02* +X119631650Y-96933100D01* +X123126650Y-91713100D02* +X123851650Y-91713100D01* +X123851650Y-91713100D02* +X123851650Y-92438100D01* +X123851650Y-96208100D02* +X123851650Y-96933100D01* +X123851650Y-96933100D02* +X123126650Y-96933100D01* +X119101650Y-92823100D02* +X118771650Y-93063100D01* +X118771650Y-92583100D01* +X119101650Y-92823100D01* +G36* +X119101650Y-92823100D02* +G01* +X118771650Y-93063100D01* +X118771650Y-92583100D01* +X119101650Y-92823100D01* +G37* +%TO.C,JP3*% +X139341650Y-95123100D02* +X139341650Y-94523100D01* +X139891650Y-96323100D02* +X140491650Y-96323100D01* +X139991650Y-93823100D02* +X142791650Y-93823100D01* +X140191650Y-96023100D02* +X139891650Y-96323100D01* +X140191650Y-96023100D02* +X140491650Y-96323100D01* +X142791650Y-95823100D02* +X139991650Y-95823100D01* +X143441650Y-94523100D02* +X143441650Y-95123100D01* +X139341650Y-94523100D02* +G75* +G02* +X140041650Y-93823100I699999J1D01* +G01* +X140041650Y-95823100D02* +G75* +G02* +X139341650Y-95123100I-1J699999D01* +G01* +X142741650Y-93823100D02* +G75* +G02* +X143441650Y-94523100I0J-700000D01* +G01* +X143441650Y-95123100D02* +G75* +G02* +X142741650Y-95823100I-700000J0D01* +G01* +%TO.C,Q10*% +X86881650Y-50873100D02* +X86881650Y-51143100D01* +X86881650Y-57773100D02* +X86881650Y-57503100D01* +X93301650Y-50873100D02* +X86881650Y-50873100D01* +X93301650Y-57773100D02* +X86881650Y-57773100D01* +X85151650Y-51183100D02* +X84811650Y-50713100D01* +X85491650Y-50713100D01* +X85151650Y-51183100D01* +G36* +X85151650Y-51183100D02* +G01* +X84811650Y-50713100D01* +X85491650Y-50713100D01* +X85151650Y-51183100D01* +G37* +%TO.C,R53*% +X134629392Y-90800600D02* +X135103908Y-90800600D01* +X134629392Y-91845600D02* +X135103908Y-91845600D01* +%TO.C,R51*% +X104629392Y-101800600D02* +X105103908Y-101800600D01* +X104629392Y-102845600D02* +X105103908Y-102845600D01* +%TO.C,C10*% +X85254150Y-69975600D02* +X86041650Y-69975600D01* +X85647900Y-69581850D02* +X85647900Y-70369350D01* +X86281650Y-69477537D02* +X86281650Y-70763100D01* +X86281650Y-69477537D02* +X87346087Y-68413100D01* +X86281650Y-74168663D02* +X86281650Y-72883100D01* +X86281650Y-74168663D02* +X87346087Y-75233100D01* +X87346087Y-68413100D02* +X93101650Y-68413100D01* +X87346087Y-75233100D02* +X93101650Y-75233100D01* +X93101650Y-68413100D02* +X93101650Y-70763100D01* +X93101650Y-75233100D02* +X93101650Y-72883100D01* +%TO.C,Rcomp2*% +X179454392Y-115800600D02* +X179928908Y-115800600D01* +X179454392Y-116845600D02* +X179928908Y-116845600D01* +%TO.C,SW1*% +X198941650Y-134823100D02* +X198941650Y-136323100D01* +X200191650Y-138823100D02* +X204691650Y-138823100D01* +X204691650Y-132323100D02* +X200191650Y-132323100D01* +X205941650Y-136323100D02* +X205941650Y-134823100D01* +%TO.C,R58*% +X134754392Y-103800600D02* +X135228908Y-103800600D01* +X134754392Y-104845600D02* +X135228908Y-104845600D01* +%TO.C,Rrp*% +X84954392Y-60800600D02* +X85428908Y-60800600D01* +X84954392Y-61845600D02* +X85428908Y-61845600D01* +%TO.C,Q6*% +X182431650Y-61763100D02* +X183951650Y-61763100D01* +X182431650Y-61813100D02* +X182431650Y-61763100D01* +X182431650Y-63713100D02* +X182431650Y-62933100D01* +X182431650Y-64883100D02* +X182431650Y-64833100D01* +X183951650Y-61763100D02* +X183951650Y-62763100D01* +X183951650Y-63883100D02* +X183951650Y-64883100D01* +X183951650Y-64883100D02* +X182431650Y-64883100D01* +X181891650Y-62943100D02* +X182131650Y-63273100D01* +X181651650Y-63273100D01* +X181891650Y-62943100D01* +G36* +X182131650Y-63273100D02* +G01* +X181651650Y-63273100D01* +X181891650Y-62943100D01* +X182131650Y-63273100D01* +G37* +%TO.C,C31*% +X112276070Y-96813100D02* +X112557230Y-96813100D01* +X112276070Y-97833100D02* +X112557230Y-97833100D01* +%TO.C,R21*% +X176854392Y-44800600D02* +X177328908Y-44800600D01* +X176854392Y-45845600D02* +X177328908Y-45845600D01* +%TO.C,C30*% +X99930398Y-97588100D02* +X100452902Y-97588100D01* +X99930398Y-99058100D02* +X100452902Y-99058100D01* +%TO.C,R7*% +X102679392Y-111800600D02* +X103153908Y-111800600D01* +X102679392Y-112845600D02* +X103153908Y-112845600D01* +%TO.C,C3*% +X151281650Y-45113100D02* +X153631650Y-45113100D01* +X151281650Y-50868663D02* +X151281650Y-45113100D01* +X152346087Y-51933100D02* +X151281650Y-50868663D01* +X152346087Y-51933100D02* +X153631650Y-51933100D01* +X152450400Y-52566850D02* +X153237900Y-52566850D01* +X152844150Y-52960600D02* +X152844150Y-52173100D01* +X157037213Y-51933100D02* +X155751650Y-51933100D01* +X157037213Y-51933100D02* +X158101650Y-50868663D01* +X158101650Y-45113100D02* +X155751650Y-45113100D01* +X158101650Y-50868663D02* +X158101650Y-45113100D01* +%TO.C,D5*% +X92831650Y-82323100D02* +X92831650Y-84323100D01* +X92831650Y-82323100D02* +X96841650Y-82323100D01* +X92831650Y-84323100D02* +X96841650Y-84323100D01* +%TO.C,C33*% +X125455398Y-102963100D02* +X126877902Y-102963100D01* +X125455398Y-105683100D02* +X126877902Y-105683100D01* +%TO.C,Rfreq*% +X160613450Y-55792458D02* +X160613450Y-55317942D01* +X161658450Y-55792458D02* +X161658450Y-55317942D01* +%TO.C,P3*% +X207441650Y-96923100D02* +X207441650Y-98173100D01* +X207441650Y-98173100D02* +X208691650Y-98173100D01* +X209991650Y-85273100D02* +X209991650Y-86023100D01* +X209991650Y-86023100D02* +X212941650Y-86023100D01* +X209991650Y-97123100D02* +X212941650Y-97123100D01* +X209991650Y-97873100D02* +X209991650Y-97123100D01* +X212941650Y-86023100D02* +X212941650Y-91573100D01* +X212941650Y-97123100D02* +X212941650Y-91573100D01* +X207731650Y-85263100D02* +X213701650Y-85263100D01* +X213701650Y-97883100D01* +X207731650Y-97883100D01* +X207731650Y-85263100D01* +X207741650Y-85273100D02* +X208491650Y-85273100D01* +X208491650Y-87073100D01* +X207741650Y-87073100D01* +X207741650Y-85273100D01* +X207741650Y-88573100D02* +X208491650Y-88573100D01* +X208491650Y-94573100D01* +X207741650Y-94573100D01* +X207741650Y-88573100D01* +X207741650Y-96073100D02* +X208491650Y-96073100D01* +X208491650Y-97873100D01* +X207741650Y-97873100D01* +X207741650Y-96073100D01* +%TO.C,Rig*% +X101603908Y-68800600D02* +X101129392Y-68800600D01* +X101603908Y-69845600D02* +X101129392Y-69845600D01* +%TO.C,RB1*% +X194016892Y-47800600D02* +X194491408Y-47800600D01* +X194016892Y-48845600D02* +X194491408Y-48845600D01* +%TO.C,Ren1*% +X173954392Y-58800600D02* +X174428908Y-58800600D01* +X173954392Y-59845600D02* +X174428908Y-59845600D01* +%TO.C,C5*% +X92051070Y-115813100D02* +X92332230Y-115813100D01* +X92051070Y-116833100D02* +X92332230Y-116833100D01* +%TO.C,R8*% +X106679392Y-111800600D02* +X107153908Y-111800600D01* +X106679392Y-112845600D02* +X107153908Y-112845600D01* +%TO.C,C24*% +X118776070Y-111813100D02* +X119057230Y-111813100D01* +X118776070Y-112833100D02* +X119057230Y-112833100D01* +%TO.C,R54*% +X134629392Y-94800600D02* +X135103908Y-94800600D01* +X134629392Y-95845600D02* +X135103908Y-95845600D01* +%TO.C,R57*% +X134629392Y-99300600D02* +X135103908Y-99300600D01* +X134629392Y-100345600D02* +X135103908Y-100345600D01* +%TO.C,R50*% +X112129392Y-101800600D02* +X112603908Y-101800600D01* +X112129392Y-102845600D02* +X112603908Y-102845600D01* +%TO.C,Dbk2*% +X184981650Y-102173100D02* +X184981650Y-105473100D01* +X184981650Y-102173100D02* +X190491650Y-102173100D01* +X184981650Y-105473100D02* +X190491650Y-105473100D01* +%TO.C,TP2*% +X128641650Y-87323100D02* +G75* +G02* +X126741650Y-87323100I-950000J0D01* +G01* +X126741650Y-87323100D02* +G75* +G02* +X128641650Y-87323100I950000J0D01* +G01* +%TO.C,Cu4*% +X136776070Y-111813100D02* +X137057230Y-111813100D01* +X136776070Y-112833100D02* +X137057230Y-112833100D01* +%TO.C,C23*% +X179480398Y-50488100D02* +X180002902Y-50488100D01* +X179480398Y-51958100D02* +X180002902Y-51958100D01* +%TO.C,JP2*% +X139341650Y-90623100D02* +X139341650Y-90023100D01* +X139891650Y-91823100D02* +X140491650Y-91823100D01* +X139991650Y-89323100D02* +X142791650Y-89323100D01* +X140191650Y-91523100D02* +X139891650Y-91823100D01* +X140191650Y-91523100D02* +X140491650Y-91823100D01* +X142791650Y-91323100D02* +X139991650Y-91323100D01* +X143441650Y-90023100D02* +X143441650Y-90623100D01* +X139341650Y-90023100D02* +G75* +G02* +X140041650Y-89323100I699999J1D01* +G01* +X140041650Y-91323100D02* +G75* +G02* +X139341650Y-90623100I-1J699999D01* +G01* +X142741650Y-89323100D02* +G75* +G02* +X143441650Y-90023100I0J-700000D01* +G01* +X143441650Y-90623100D02* +G75* +G02* +X142741650Y-91323100I-700000J0D01* +G01* +%TO.C,D6*% +X202051650Y-60823100D02* +X198041650Y-60823100D01* +X202051650Y-62823100D02* +X198041650Y-62823100D01* +X202051650Y-62823100D02* +X202051650Y-60823100D01* +%TO.C,D4G*% +X201415000Y-91140000D02* +X201415000Y-93060000D01* +X201415000Y-93060000D02* +X204100000Y-93060000D01* +X204100000Y-91140000D02* +X201415000Y-91140000D01* +%TO.C,L7*% +X165641650Y-114173100D02* +X169741650Y-114173100D01* +X165641650Y-122473100D02* +X163541650Y-120373100D01* +X169741650Y-114173100D02* +X171841650Y-116273100D01* +X169741650Y-122473100D02* +X165641650Y-122473100D01* +X169741650Y-122473100D02* +X171841650Y-120373100D01* +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-In1_Cu.g1 b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-In1_Cu.g1 new file mode 100644 index 0000000..b3ef527 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-In1_Cu.g1 @@ -0,0 +1,17134 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L2,Inr*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%TA.AperFunction,ComponentPad*% +%ADD10RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD11O,1.700000X1.950000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD12RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD13O,1.950000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD14RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD15RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD16O,2.000000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD17R,1.700000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD18C,1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD19RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD20O,1.700000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD21R,1.350000X1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD22C,1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD23RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD24C,0.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD25O,0.900000X2.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD26O,0.900000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD27RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD28C,2.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD29R,2.000000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD30C,2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD31R,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD32O,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD33C,0.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD34C,0.800000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD35C,0.200000*% +%TD*% +G04 APERTURE END LIST* +D10* +%TO.N,USART1_RX*% +%TO.C,P13*% +X116191650Y-46323100D03* +D11* +%TO.N,/DIN_4G*% +X118691650Y-46323100D03* +%TO.N,GND*% +X121191650Y-46323100D03* +%TD*% +D12* +%TO.N,/5V_FAN*% +%TO.C,P6*% +X210191650Y-61823100D03* +D13* +%TO.N,/FAN_RET*% +X210191650Y-59323100D03* +%TO.N,GND*% +X210191650Y-56823100D03* +%TO.N,FAN_TACH_RAW*% +X210191650Y-54323100D03* +%TD*% +D14* +%TO.N,/BAT_PLUS*% +%TO.C,P4*% +X210191650Y-108323100D03* +D13* +%TO.N,GND*% +X210191650Y-105823100D03* +%TO.N,/NTC*% +X210191650Y-103323100D03* +%TD*% +D15* +%TO.N,/NRST*% +%TO.C,P10*% +X210166650Y-80073100D03* +D16* +%TO.N,GND*% +X210166650Y-77573100D03* +%TD*% +D17* +%TO.N,unconnected-(J1-Pin_1-Pad1)*% +%TO.C,J1*% +X107191650Y-56323100D03* +D18* +%TO.N,unconnected-(J1-Pin_2-Pad2)*% +X109731650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_3-Pad3)*% +X112271650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_4-Pad4)*% +X114811650Y-56323100D03* +%TO.N,/NRST*% +X117351650Y-56323100D03* +%TO.N,/BAT_SENSE*% +X119891650Y-56323100D03* +%TO.N,/PWR_CTRL*% +X122431650Y-56323100D03* +%TO.N,/GNSS_TX*% +X124971650Y-56323100D03* +%TO.N,/GNSS_RX*% +X127511650Y-56323100D03* +%TO.N,/5V_SENSE*% +X130051650Y-56323100D03* +%TO.N,IGN_SENSE*% +X132591650Y-56323100D03* +%TO.N,FAN_PWM*% +X135131650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_13-Pad13)*% +X137671650Y-56323100D03* +%TO.N,EXT_LED*% +X140211650Y-56323100D03* +%TO.N,/NTC_TEMP*% +X142751650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_16-Pad16)*% +X145291650Y-56323100D03* +%TO.N,FAN_TACH*% +X147831650Y-56323100D03* +%TO.N,3V3*% +X150371650Y-56323100D03* +%TO.N,GND*% +X152911650Y-56323100D03* +%TO.N,/SYS5V*% +X155451650Y-56323100D03* +%TD*% +D19* +%TO.N,/MAIN5V*% +%TO.C,P11*% +X135791650Y-46323100D03* +D20* +%TO.N,/SYS5V*% +X138291650Y-46323100D03* +%TD*% +D21* +%TO.N,/3V3_MODEM*% +%TO.C,J7*% +X174191650Y-74823100D03* +D22* +%TO.N,/DOUT_4G*% +X174191650Y-76823100D03* +%TO.N,/DIN_4G*% +X174191650Y-78823100D03* +%TO.N,GND*% +X174191650Y-80823100D03* +%TO.N,/MODEM_RST*% +X174191650Y-82823100D03* +%TO.N,/USB_VBUS*% +X174191650Y-84823100D03* +%TO.N,/USB_DP*% +X174191650Y-86823100D03* +%TO.N,/USB_DM*% +X174191650Y-88823100D03* +%TO.N,unconnected-(J7-Pin_9-Pad9)*% +X174191650Y-90823100D03* +%TO.N,GND*% +X174191650Y-92823100D03* +%TD*% +D19* +%TO.N,/VEH5V*% +%TO.C,P2*% +X127191650Y-46323100D03* +D20* +%TO.N,GND*% +X129691650Y-46323100D03* +%TD*% +D17* +%TO.N,/USART1_TX*% +%TO.C,H3*% +X111191650Y-46323100D03* +D18* +%TO.N,USART1_RX*% +X111191650Y-48863100D03* +%TO.N,GND*% +X111191650Y-51403100D03* +%TD*% +D21* +%TO.N,GND*% +%TO.C,J8*% +X196541650Y-74823100D03* +D22* +%TO.N,unconnected-(J8-Pin_2-Pad2)*% +X196541650Y-76823100D03* +%TO.N,unconnected-(J8-Pin_3-Pad3)*% +X196541650Y-78823100D03* +%TO.N,unconnected-(J8-Pin_4-Pad4)*% +X196541650Y-80823100D03* +%TO.N,unconnected-(J8-Pin_5-Pad5)*% +X196541650Y-82823100D03* +%TO.N,GND*% +X196541650Y-84823100D03* +%TO.N,/3V3_MODEM*% +X196541650Y-86823100D03* +%TO.N,/MODEM_LED*% +X196541650Y-88823100D03* +%TO.N,unconnected-(J8-Pin_9-Pad9)*% +X196541650Y-90823100D03* +%TO.N,GND*% +X196541650Y-92823100D03* +%TD*% +D10* +%TO.N,3V3*% +%TO.C,P5*% +X98191650Y-46323100D03* +D11* +%TO.N,GND*% +X100691650Y-46323100D03* +%TO.N,/I2C_SDA*% +X103191650Y-46323100D03* +%TO.N,/I2C_SCL*% +X105691650Y-46323100D03* +%TD*% +D15* +%TO.N,/LED_A*% +%TO.C,P8*% +X210166650Y-70823100D03* +D16* +%TO.N,/LED_K*% +X210166650Y-68323100D03* +%TD*% +D23* +%TO.N,/NTC_TEMP*% +%TO.C,P12*% +X210191650Y-121323100D03* +D16* +%TO.N,GND*% +X210191650Y-118823100D03* +%TD*% +D24* +%TO.N,GND*% +%TO.C,J9*% +X161175000Y-129425000D03* +%TO.N,/USB_VBUS*% +X162025000Y-129425000D03* +%TO.N,/USB_CC1*% +X162875000Y-129425000D03* +%TO.N,/USB_DP*% +X163725000Y-129425000D03* +%TO.N,/USB_DM*% +X164575000Y-129425000D03* +%TO.N,N/C*% +X165425000Y-129425000D03* +%TO.N,/USB_VBUS*% +X166275000Y-129425000D03* +%TO.N,GND*% +X167125000Y-129425000D03* +X167125000Y-130775000D03* +%TO.N,/USB_VBUS*% +X166275000Y-130775000D03* +%TO.N,/USB_CC2*% +X165425000Y-130775000D03* +%TO.N,/USB_DP*% +X164575000Y-130775000D03* +%TO.N,/USB_DM*% +X163725000Y-130775000D03* +%TO.N,N/C*% +X162875000Y-130775000D03* +%TO.N,/USB_VBUS*% +X162025000Y-130775000D03* +%TO.N,GND*% +X161175000Y-130775000D03* +D25* +X159825000Y-130405000D03* +D26* +X159825000Y-133785000D03* +D25* +X168475000Y-130405000D03* +D26* +X168475000Y-133785000D03* +%TD*% +D27* +%TO.N,/24V_IN*% +%TO.C,P1*% +X172691650Y-133823100D03* +D28* +%TO.N,GND*% +X177691650Y-133823100D03* +%TO.N,IGN_IN*% +X182691650Y-133823100D03* +%TO.N,unconnected-(P1-Pin_4-Pad4)*% +X187691650Y-133823100D03* +%TO.N,unconnected-(P1-Pin_5-Pad5)*% +X192691650Y-133823100D03* +%TD*% +D29* +%TO.N,USART1_RX*% +%TO.C,K1*% +X189284150Y-55865600D03* +D30* +%TO.N,/SYS5V*% +X189284150Y-58405600D03* +%TO.N,/DIN_4G*% +X189284150Y-66025600D03* +X194364150Y-66025600D03* +%TO.N,/KCOIL*% +X194364150Y-58405600D03* +%TO.N,/USART1_TX*% +X194364150Y-55865600D03* +%TD*% +D17* +%TO.N,/BATLED1*% +%TO.C,J2*% +X107191650Y-74103100D03* +D18* +%TO.N,/BATLED2*% +X109731650Y-74103100D03* +%TO.N,/BATLED3*% +X112271650Y-74103100D03* +%TO.N,/BATLED4*% +X114811650Y-74103100D03* +%TO.N,/CHRG_EN*% +X117351650Y-74103100D03* +%TO.N,/USART1_TX*% +X119891650Y-74103100D03* +%TO.N,USART1_RX*% +X122431650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_8-Pad8)*% +X124971650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_9-Pad9)*% +X127511650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_10-Pad10)*% +X130051650Y-74103100D03* +%TO.N,/CHRG_STAT*% +X132591650Y-74103100D03* +%TO.N,/CHRG_FAULT*% +X135131650Y-74103100D03* +%TO.N,/BYP_CTRL*% +X137671650Y-74103100D03* +%TO.N,/I2C_SCL*% +X140211650Y-74103100D03* +%TO.N,/I2C_SDA*% +X142751650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_16-Pad16)*% +X145291650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_17-Pad17)*% +X147831650Y-74103100D03* +%TO.N,/SYS5V*% +X150371650Y-74103100D03* +%TO.N,GND*% +X152911650Y-74103100D03* +%TO.N,3V3*% +X155451650Y-74103100D03* +%TD*% +D30* +%TO.N,/NRST*% +%TO.C,SW1*% +X199191650Y-133323100D03* +X205691650Y-133323100D03* +%TO.N,GND*% +X199191650Y-137823100D03* +X205691650Y-137823100D03* +%TD*% +D14* +%TO.N,/SW_5V*% +%TO.C,P3*% +X210191650Y-95323100D03* +D13* +%TO.N,GND*% +X210191650Y-92823100D03* +%TO.N,/GNSS_TX*% +X210191650Y-90323100D03* +%TO.N,/GNSS_RX*% +X210191650Y-87823100D03* +%TD*% +D31* +%TO.N,unconnected-(MOD1-NC-Pad1)*% +%TO.C,MOD1*% +X115251650Y-129583100D03* +D32* +%TO.N,3V3*% +X117791650Y-129583100D03* +%TO.N,unconnected-(MOD1-RESET-Pad3)*% +X120331650Y-129583100D03* +%TO.N,unconnected-(MOD1-3V3_OUT-Pad4)*% +X122871650Y-129583100D03* +%TO.N,/SW_5V*% +X125411650Y-129583100D03* +%TO.N,GND*% +X127951650Y-129583100D03* +X130491650Y-129583100D03* +%TO.N,unconnected-(MOD1-VIN-Pad8)*% +X133031650Y-129583100D03* +%TO.N,unconnected-(MOD1-A0-Pad9)*% +X138111650Y-129583100D03* +%TO.N,unconnected-(MOD1-A1-Pad10)*% +X140651650Y-129583100D03* +%TO.N,unconnected-(MOD1-A2-Pad11)*% +X143191650Y-129583100D03* +%TO.N,unconnected-(MOD1-A3-Pad12)*% +X145731650Y-129583100D03* +%TO.N,unconnected-(MOD1-A4-Pad13)*% +X148271650Y-129583100D03* +%TO.N,unconnected-(MOD1-A5-Pad14)*% +X150811650Y-129583100D03* +%TO.N,/GNSS_RX*% +X150811650Y-81323100D03* +%TO.N,/GNSS_TX*% +X148271650Y-81323100D03* +%TO.N,/DOUT_4G*% +X145731650Y-81323100D03* +%TO.N,unconnected-(MOD1-D3-Pad18)*% +X143191650Y-81323100D03* +%TO.N,unconnected-(MOD1-D4-Pad19)*% +X140651650Y-81323100D03* +%TO.N,unconnected-(MOD1-D5-Pad20)*% +X138111650Y-81323100D03* +%TO.N,unconnected-(MOD1-D6-Pad21)*% +X135571650Y-81323100D03* +%TO.N,unconnected-(MOD1-D7-Pad22)*% +X133031650Y-81323100D03* +%TO.N,USART1_RX*% +X128971650Y-81323100D03* +%TO.N,unconnected-(MOD1-D9-Pad24)*% +X126431650Y-81323100D03* +%TO.N,unconnected-(MOD1-D10-Pad25)*% +X123891650Y-81323100D03* +%TO.N,unconnected-(MOD1-FENCE_D11-Pad26)*% +X121351650Y-81323100D03* +%TO.N,unconnected-(MOD1-EXTINT_D12-Pad27)*% +X118811650Y-81323100D03* +%TO.N,unconnected-(MOD1-TPS_D13-Pad28)*% +X116271650Y-81323100D03* +%TO.N,GND*% +X113731650Y-81323100D03* +%TO.N,unconnected-(MOD1-AREF-Pad30)*% +X111191650Y-81323100D03* +%TO.N,unconnected-(MOD1-SDA-Pad31)*% +X108651650Y-81323100D03* +%TO.N,unconnected-(MOD1-SCL-Pad32)*% +X106111650Y-81323100D03* +%TD*% +D33* +%TO.N,/GATE_LS*% +X160693550Y-59682200D03* +X154750000Y-63373100D03* +%TO.N,USART1_RX*% +X166039950Y-75929300D03* +X128569450Y-92441500D03* +X110777250Y-111539100D03* +%TO.N,/DIN_4G*% +X160280550Y-60946000D03* +X163333350Y-77836400D03* +%TO.N,GND*% +X109641650Y-76773100D03* +X88641650Y-111773100D03* +X158641650Y-48773100D03* +X165641650Y-55773100D03* +X137641650Y-48773100D03* +X102641650Y-132773100D03* +X102641650Y-118773100D03* +X81641650Y-132773100D03* +X137641650Y-41773100D03* +X194700000Y-105900000D03* +X109641650Y-125773100D03* +X191350000Y-114800000D03* +X116641650Y-97773100D03* +X88641650Y-97773100D03* +X95641650Y-76773100D03* +X109641650Y-132773100D03* +X130641650Y-132773100D03* +X126400000Y-95400000D03* +X109641650Y-62773100D03* +X81641650Y-76773100D03* +X88641650Y-41773100D03* +X102600000Y-99150000D03* +X116641650Y-132773100D03* +X144641650Y-48773100D03* +X88641650Y-104773100D03* +X144641650Y-132773100D03* +X158641650Y-125773100D03* +X109641650Y-90773100D03* +X102641650Y-125773100D03* +X151641650Y-118773100D03* +X158641650Y-132773100D03* +X137641650Y-132773100D03* +X158641650Y-83773100D03* +X95641650Y-132773100D03* +X195146650Y-110668100D03* +X158641650Y-111773100D03* +X88641650Y-76773100D03* +X81641650Y-62773100D03* +X88641650Y-48773100D03* +X130641650Y-69773100D03* +X99300000Y-114700000D03* +X177916650Y-45323100D03* +X116641650Y-125773100D03* +X123641650Y-48773100D03* +X81641650Y-41773100D03* +X138200000Y-91700000D03* +X137641650Y-111773100D03* +X116641650Y-118773100D03* +X88641650Y-83773100D03* +X123641650Y-125773100D03* +X144641650Y-111773100D03* +X165641650Y-41773100D03* +X130641650Y-111773100D03* +X95641650Y-104773100D03* +X123641650Y-83773100D03* +X130200000Y-99700000D03* +X81641650Y-111773100D03* +X123641650Y-69773100D03* +X116641650Y-76773100D03* +X81641650Y-104773100D03* +X187350000Y-62946400D03* +X88641650Y-132773100D03* +X87600000Y-58750000D03* +X144641650Y-41773100D03* +X130200000Y-106000000D03* +X130641650Y-76773100D03* +X81641650Y-48773100D03* +X116641650Y-62773100D03* +X109641650Y-97773100D03* +X116641650Y-48773100D03* +X88641650Y-90773100D03* +X95000000Y-114550000D03* +X81641650Y-83773100D03* +X81641650Y-118773100D03* +X151641650Y-104773100D03* +X88641650Y-69773100D03* +X95641650Y-90773100D03* +X95641650Y-118773100D03* +X81641650Y-69773100D03* +X151641650Y-132773100D03* +X95641650Y-125773100D03* +X81641650Y-97773100D03* +X151641650Y-41773100D03* +X135000000Y-97200000D03* +X88641650Y-118773100D03* +X158641650Y-69773100D03* +X109641650Y-118773100D03* +X165641650Y-48773100D03* +X158641650Y-41773100D03* +X102641650Y-48773100D03* +X95641650Y-41773100D03* +X81641650Y-55773100D03* +X165641650Y-69773100D03* +X95641650Y-111773100D03* +X88641650Y-125773100D03* +X123641650Y-132773100D03* +X127200000Y-118600000D03* +X81641650Y-90773100D03* +X151641650Y-125773100D03* +X123641650Y-76773100D03* +X81641650Y-125773100D03* +X101650000Y-85500000D03* +X144641650Y-118773100D03* +X100016650Y-94323100D03* +%TO.N,IGN_SENSE*% +X98158150Y-78069300D03* +X97851650Y-82803100D03* +X100361150Y-84328200D03* +X120700000Y-67650000D03* +%TO.N,SW_FAN*% +X166684150Y-63823100D03* +X170312950Y-55362600D03* +%TO.N,/5V_FAN*% +X179603350Y-49835200D03* +X190530850Y-50051900D03* +%TO.N,/FAN_RET*% +X108674350Y-96377200D03* +X154715450Y-93359800D03* +X102589950Y-100215700D03* +%TO.N,FAN_TACH_RAW*% +X99473450Y-103450700D03* +X175683950Y-98459400D03* +%TO.N,/EN_FAN*% +X173406650Y-53346300D03* +X174360750Y-60216800D03* +D34* +%TO.N,/BAT_PLUS*% +X119381650Y-89423100D03* +X126821650Y-89223100D03* +D33* +X93354250Y-109584900D03* +X116831650Y-109478500D03* +%TO.N,/NTC*% +X125531650Y-94123100D03* +X115743450Y-105395800D03* +%TO.N,/NRST*% +X124192950Y-57474800D03* +%TO.N,/SW3_NODE*% +X188691650Y-107616000D03* +X187096850Y-116026900D03* +%TO.N,/SW_5V*% +X171760150Y-97690900D03* +D34* +X202151650Y-113193100D03* +D33* +X171616850Y-113477300D03* +X156800000Y-63900000D03* +%TO.N,/FB3*% +X188669750Y-102323100D03* +X196890950Y-110544300D03* +X181474350Y-109498300D03* +%TO.N,/BST3*% +X187141650Y-107717500D03* +X192976150Y-114752100D03* +%TO.N,/BAT_SENSE*% +X92198550Y-67700900D03* +X92096650Y-109080400D03* +%TO.N,/PWR_CTRL*% +X161642250Y-61571200D03* +%TO.N,/5V_SENSE*% +X94238250Y-70412600D03* +X106831950Y-111582800D03* +%TO.N,FAN_PWM*% +X96481050Y-72166600D03* +X93366650Y-93338100D03* +%TO.N,EXT_LED*% +X93850000Y-69300000D03* +X91096750Y-104059500D03* +%TO.N,/NTC_TEMP*% +X164399250Y-108749200D03* +X169737250Y-114087200D03* +%TO.N,FAN_TACH*% +X147661250Y-69044000D03* +X96632650Y-78671100D03* +X98373850Y-101217400D03* +%TO.N,3V3*% +X134491750Y-98820000D03* +X94149150Y-84401600D03* +X99126050Y-102323100D03* +X133429550Y-103586000D03* +X153056550Y-96999800D03* +X132141650Y-111318200D03* +X94584350Y-46323100D03* +%TO.N,/COMP3_C*% +X185251750Y-114635100D03* +X185102650Y-116791200D03* +%TO.N,/MAIN5V*% +X125649250Y-91964400D03* +X118024250Y-91808100D03* +X101515750Y-77180100D03* +%TO.N,/SW_IN*% +X153600000Y-64200000D03* +X135500000Y-61250000D03* +X152216950Y-51550500D03* +X142150000Y-60950000D03* +%TO.N,FAN_GATE*% +X99480750Y-93353800D03* +X102921150Y-95462200D03* +%TO.N,/IGATE*% +X125151650Y-94993100D03* +X113056750Y-91373700D03* +%TO.N,/I2C_SDA*% +X126615050Y-111714800D03* +X101976450Y-75485300D03* +X127665550Y-92441500D03* +%TO.N,/MODEM_LED*% +X198850000Y-88800000D03* +X200050000Y-84450000D03* +%TO.N,/MODEM_LED_A*% +X203900000Y-86050000D03* +X203900000Y-89600000D03* +%TO.N,/I2C_SCL*% +X126634150Y-113349000D03* +X114758150Y-48379800D03* +X129603150Y-92460000D03* +X137323450Y-88991500D03* +%TO.N,/3V3_MODEM*% +X193850000Y-86850000D03* +X190900000Y-89050000D03* +X176066750Y-104039400D03* +X209550000Y-113750000D03* +%TO.N,/MODEM_RST*% +X141900000Y-135600000D03* +%TO.N,/USB_VBUS*% +X167850000Y-84700000D03* +%TO.N,/VEH5V*% +X117951650Y-94803100D03* +X124691650Y-94303100D03* +X166798050Y-79030300D03* +X102876050Y-80722800D03* +%TO.N,/LED_A*% +X177369150Y-107426100D03* +X101070250Y-115089600D03* +X99789850Y-107426100D03* +%TO.N,/24V_IN*% +X91070550Y-62038400D03* +%TO.N,/BASE_LS*% +X164501350Y-60325100D03* +X155562650Y-61161300D03* +%TO.N,/FB_FAN*% +X177545250Y-46302100D03* +X173372150Y-49792700D03* +%TO.N,BST_FAN*% +X168394750Y-46076200D03* +X166741750Y-55441500D03* +%TO.N,/SW_BAT*% +X163800000Y-91850000D03* +X131319350Y-83542700D03* +%TO.N,/BATLED3*% +X166527050Y-75260400D03* +X200007250Y-48492500D03* +%TO.N,/CLPROG_TP*% +X114646550Y-94202200D03* +X113191650Y-106044500D03* +%TO.N,/BATLED4*% +X169830950Y-65597500D03* +X183644750Y-51599100D03* +%TO.N,/F0_SEL*% +X141742750Y-98569500D03* +X124831650Y-95933100D03* +%TO.N,/LED_K*% +X173946950Y-108033000D03* +X110969350Y-113108400D03* +%TO.N,/BATLED2*% +X196017950Y-48827700D03* +X181693450Y-60961400D03* +%TO.N,/USB_CC2*% +X167500000Y-125600000D03* +%TO.N,IGN_IN*% +X104345350Y-71164600D03* +%TO.N,/PFI*% +X124054450Y-91327700D03* +X103327750Y-84222500D03* +X106503750Y-97236300D03* +X107654450Y-82308900D03* +%TO.N,/BATLED1*% +X189562750Y-50997400D03* +X164175850Y-64973500D03* +%TO.N,/CHRG_EN*% +X98082650Y-74113300D03* +X116831050Y-94436200D03* +X105480950Y-106336700D03* +%TO.N,/CHRG_STAT*% +X135231550Y-98013400D03* +X126664550Y-98079400D03* +X140542950Y-92479800D03* +%TO.N,/CHRG_FAULT*% +X144410950Y-96559700D03* +X127507350Y-95248400D03* +%TO.N,/PROG*% +X113901850Y-103113300D03* +X113519050Y-94430400D03* +%TO.N,/VFB_BST*% +X134239650Y-97200400D03* +X130447050Y-92807700D03* +X122002950Y-97751700D03* +%TO.N,/F2_SEL*% +X123382550Y-96548400D03* +X136675750Y-95494500D03* +%TO.N,/F1_SEL*% +X138135550Y-97466200D03* +X127321350Y-96853600D03* +%TD*% +%TO.N,/MODEM_LED*% +D35* +X200050000Y-87600000D02* +X200050000Y-84450000D01* +X198850000Y-88800000D02* +X200050000Y-87600000D01* +%TO.N,/MODEM_LED_A*% +X203900000Y-89600000D02* +X203900000Y-86050000D01* +%TO.N,/MODEM_RST*% +X141900000Y-135600000D02* +X141900000Y-133850000D01* +X141900000Y-133850000D02* +X144000000Y-131750000D01* +X151500000Y-131750000D02* +X155850000Y-127400000D01* +X165750000Y-82800000D02* +X174168550Y-82800000D01* +X174168550Y-82800000D02* +X174191650Y-82823100D01* +X155850000Y-92700000D02* +X165750000Y-82800000D01* +X155850000Y-127400000D02* +X155850000Y-92700000D01* +X144000000Y-131750000D02* +X151500000Y-131750000D01* +%TO.N,/USB_VBUS*% +X166275000Y-129425000D02* +X166250000Y-129400000D01* +X166250000Y-128000000D02* +X165900000Y-127650000D01* +X167850000Y-84700000D02* +X167950000Y-84600000D01* +X165900000Y-127650000D02* +X165900000Y-86650000D01* +X166250000Y-129400000D02* +X166250000Y-128000000D01* +X166275000Y-129425000D02* +X166275000Y-130775000D01* +X165900000Y-86650000D02* +X167850000Y-84700000D01* +%TO.N,/USB_DP*% +X174191650Y-86823100D02* +X170618550Y-83250000D01* +X165100000Y-84100000D02* +X165100000Y-126850000D01* +X165950000Y-83250000D02* +X165100000Y-84100000D01* +X170618550Y-83250000D02* +X165950000Y-83250000D01* +X163725000Y-128225000D02* +X163725000Y-129425000D01* +X165100000Y-126850000D02* +X163725000Y-128225000D01* +%TO.N,/USB_DM*% +X166092118Y-83673568D02* +X170476432Y-83673568D01* +X174164750Y-88850000D02* +X174191650Y-88823100D01* +X172400000Y-88850000D02* +X174164750Y-88850000D01* +X164575000Y-129425000D02* +X164575000Y-128525000D01* +X172400000Y-85597136D02* +X172400000Y-88850000D01* +X165500000Y-127600000D02* +X165500000Y-84265686D01* +X170476432Y-83673568D02* +X172400000Y-85597136D01* +X165500000Y-84265686D02* +X166092118Y-83673568D01* +X164575000Y-128525000D02* +X165500000Y-127600000D01* +%TO.N,/USB_CC2*% +X165425000Y-133325000D02* +X168300000Y-136200000D01* +X170250000Y-128350000D02* +X167500000Y-125600000D01* +X165425000Y-130775000D02* +X165550000Y-130900000D01* +X170250000Y-134250000D02* +X170250000Y-128350000D01* +X165425000Y-130775000D02* +X165425000Y-133325000D01* +X168300000Y-136200000D02* +X170250000Y-134250000D01* +%TD*% +%TA.AperFunction,Conductor*% +%TO.N,GND*% +G36* +X130025725Y-129390107D02* +G01* +X129991650Y-129517274D01* +X129991650Y-129648926D01* +X130025725Y-129776093D01* +X130058638Y-129833100D01* +X128384662Y-129833100D01* +X128417575Y-129776093D01* +X128451650Y-129648926D01* +X128451650Y-129517274D01* +X128417575Y-129390107D01* +X128384662Y-129333100D01* +X130058638Y-129333100D01* +X130025725Y-129390107D01* +G37* +%TD.AperFunction*% +%TA.AperFunction,Conductor*% +G36* +X214650341Y-40842507D02* +G01* +X214686305Y-40892007D01* +X214691150Y-40922600D01* +X214691150Y-139623616D01* +X214672243Y-139681807D01* +X214622743Y-139717771D01* +X214591973Y-139722616D01* +X80960373Y-139483276D01* +X80902216Y-139464264D01* +X80866341Y-139414700D01* +X80861550Y-139384376D01* +X80861170Y-139008128D01* +X80859853Y-137705043D01* +X197691650Y-137705043D01* +X197691650Y-137941156D01* +X197728584Y-138174352D01* +X197728585Y-138174356D01* +X197801542Y-138398893D01* +X197801544Y-138398896D01* +X197908734Y-138609269D01* +X197968989Y-138692205D01* +X198667861Y-137993332D01* +X198679132Y-138035392D01* +X198751540Y-138160808D01* +X198853942Y-138263210D01* +X198979358Y-138335618D01* +X199021415Y-138346887D01* +X198322543Y-139045759D01* +X198405475Y-139106013D01* +X198405479Y-139106015D01* +X198615853Y-139213205D01* +X198615856Y-139213207D01* +X198840393Y-139286164D01* +X198840397Y-139286165D01* +X199073594Y-139323100D01* +X199309706Y-139323100D01* +X199542902Y-139286165D01* +X199542906Y-139286164D01* +X199767443Y-139213207D01* +X199767446Y-139213205D01* +X199977820Y-139106015D01* +X199977826Y-139106011D01* +X200060755Y-139045759D01* +X200060755Y-139045758D01* +X199361884Y-138346887D01* +X199403942Y-138335618D01* +X199529358Y-138263210D01* +X199631760Y-138160808D01* +X199704168Y-138035392D01* +X199715437Y-137993334D01* +X200414308Y-138692205D01* +X200414309Y-138692205D01* +X200474561Y-138609276D01* +X200474565Y-138609270D01* +X200581755Y-138398896D01* +X200581757Y-138398893D01* +X200654714Y-138174356D01* +X200654715Y-138174352D01* +X200691650Y-137941156D01* +X200691650Y-137705043D01* +X204191650Y-137705043D01* +X204191650Y-137941156D01* +X204228584Y-138174352D01* +X204228585Y-138174356D01* +X204301542Y-138398893D01* +X204301544Y-138398896D01* +X204408734Y-138609269D01* +X204468989Y-138692205D01* +X205167861Y-137993332D01* +X205179132Y-138035392D01* +X205251540Y-138160808D01* +X205353942Y-138263210D01* +X205479358Y-138335618D01* +X205521415Y-138346887D01* +X204822543Y-139045759D01* +X204905475Y-139106013D01* +X204905479Y-139106015D01* +X205115853Y-139213205D01* +X205115856Y-139213207D01* +X205340393Y-139286164D01* +X205340397Y-139286165D01* +X205573594Y-139323100D01* +X205809706Y-139323100D01* +X206042902Y-139286165D01* +X206042906Y-139286164D01* +X206267443Y-139213207D01* +X206267446Y-139213205D01* +X206477820Y-139106015D01* +X206477826Y-139106011D01* +X206560755Y-139045759D01* +X206560755Y-139045758D01* +X205861884Y-138346887D01* +X205903942Y-138335618D01* +X206029358Y-138263210D01* +X206131760Y-138160808D01* +X206204168Y-138035392D01* +X206215437Y-137993334D01* +X206914308Y-138692205D01* +X206914309Y-138692205D01* +X206974561Y-138609276D01* +X206974565Y-138609270D01* +X207081755Y-138398896D01* +X207081757Y-138398893D01* +X207154714Y-138174356D01* +X207154715Y-138174352D01* +X207191650Y-137941156D01* +X207191650Y-137705043D01* +X207154715Y-137471847D01* +X207154714Y-137471843D01* +X207081757Y-137247306D01* +X207081755Y-137247303D01* +X206974565Y-137036929D01* +X206974563Y-137036925D01* +X206914309Y-136953993D01* +X206215437Y-137652865D01* +X206204168Y-137610808D01* +X206131760Y-137485392D01* +X206029358Y-137382990D01* +X205903942Y-137310582D01* +X205861882Y-137299311D01* +X206560755Y-136600439D01* +X206477819Y-136540184D01* +X206267446Y-136432994D01* +X206267443Y-136432992D01* +X206042906Y-136360035D01* +X206042902Y-136360034D01* +X205809706Y-136323100D01* +X205573594Y-136323100D01* +X205340397Y-136360034D01* +X205340393Y-136360035D01* +X205115856Y-136432992D01* +X205115853Y-136432994D01* +X204905473Y-136540188D01* +X204822543Y-136600439D01* +X205521416Y-137299312D01* +X205479358Y-137310582D01* +X205353942Y-137382990D01* +X205251540Y-137485392D01* +X205179132Y-137610808D01* +X205167862Y-137652866D01* +X204468989Y-136953993D01* +X204408738Y-137036923D01* +X204301544Y-137247303D01* +X204301542Y-137247306D01* +X204228585Y-137471843D01* +X204228584Y-137471847D01* +X204191650Y-137705043D01* +X200691650Y-137705043D01* +X200654715Y-137471847D01* +X200654714Y-137471843D01* +X200581757Y-137247306D01* +X200581755Y-137247303D01* +X200474565Y-137036929D01* +X200474563Y-137036925D01* +X200414309Y-136953993D01* +X199715437Y-137652865D01* +X199704168Y-137610808D01* +X199631760Y-137485392D01* +X199529358Y-137382990D01* +X199403942Y-137310582D01* +X199361882Y-137299311D01* +X200060755Y-136600439D01* +X199977819Y-136540184D01* +X199767446Y-136432994D01* +X199767443Y-136432992D01* +X199542906Y-136360035D01* +X199542902Y-136360034D01* +X199309706Y-136323100D01* +X199073594Y-136323100D01* +X198840397Y-136360034D01* +X198840393Y-136360035D01* +X198615856Y-136432992D01* +X198615853Y-136432994D01* +X198405473Y-136540188D01* +X198322543Y-136600439D01* +X199021416Y-137299312D01* +X198979358Y-137310582D01* +X198853942Y-137382990D01* +X198751540Y-137485392D01* +X198679132Y-137610808D01* +X198667862Y-137652866D01* +X197968989Y-136953993D01* +X197908738Y-137036923D01* +X197801544Y-137247303D01* +X197801542Y-137247306D01* +X197728585Y-137471843D01* +X197728584Y-137471847D01* +X197691650Y-137705043D01* +X80859853Y-137705043D01* +X80859849Y-137701257D01* +X80858736Y-136600439D01* +X80857322Y-135201810D01* +X83341150Y-135201810D01* +X83341150Y-135444389D01* +X83372811Y-135684881D01* +X83372811Y-135684886D01* +X83435594Y-135919192D01* +X83435598Y-135919205D01* +X83528422Y-136143304D01* +X83528424Y-136143308D01* +X83528426Y-136143312D01* +X83632227Y-136323100D01* +X83649716Y-136353392D01* +X83797379Y-136545831D01* +X83797381Y-136545833D01* +X83797385Y-136545838D01* +X83968912Y-136717365D01* +X83968916Y-136717368D01* +X83968918Y-136717370D01* +X84161357Y-136865033D01* +X84161361Y-136865036D01* +X84371438Y-136986324D01* +X84595550Y-137079154D01* +X84829861Y-137141938D01* +X85070362Y-137173600D01* +X85070363Y-137173600D01* +X85312937Y-137173600D01* +X85312938Y-137173600D01* +X85553439Y-137141938D01* +X85787750Y-137079154D01* +X86011862Y-136986324D01* +X86221939Y-136865036D01* +X86414388Y-136717365D01* +X86585915Y-136545838D01* +X86733586Y-136353389D01* +X86854874Y-136143312D01* +X86947704Y-135919200D01* +X87010488Y-135684889D01* +X87029472Y-135540691D01* +X141449500Y-135540691D01* +X141449500Y-135659309D01* +X141476574Y-135760351D01* +X141480202Y-135773890D01* +X141539507Y-135876608D01* +X141539509Y-135876610D01* +X141539511Y-135876613D01* +X141623387Y-135960489D01* +X141623389Y-135960490D01* +X141623391Y-135960492D01* +X141726110Y-136019797D01* +X141726111Y-136019797D01* +X141726114Y-136019799D01* +X141840691Y-136050500D01* +X141840693Y-136050500D01* +X141959307Y-136050500D01* +X141959309Y-136050500D01* +X142073886Y-136019799D01* +X142073888Y-136019797D01* +X142073890Y-136019797D01* +X142176608Y-135960492D01* +X142176608Y-135960491D01* +X142176613Y-135960489D01* +X142260489Y-135876613D01* +X142278314Y-135845739D01* +X142319797Y-135773890D01* +X142319797Y-135773888D01* +X142319799Y-135773886D01* +X142350500Y-135659309D01* +X142350500Y-135540691D01* +X142319799Y-135426114D01* +X142319797Y-135426111D01* +X142319797Y-135426109D01* +X142260492Y-135323391D01* +X142260488Y-135323386D01* +X142179496Y-135242393D01* +X142151719Y-135187876D01* +X142150500Y-135172390D01* +X142150500Y-133994769D01* +X142152968Y-133987171D01* +X142151719Y-133979282D01* +X142156121Y-133970642D01* +X142156121Y-133963400D01* +X142165851Y-133947521D01* +X142169407Y-133936578D01* +X142179496Y-133924765D01* +X142812831Y-133291430D01* +X158875000Y-133291430D01* +X158875000Y-133534999D01* +X158875001Y-133535000D01* +X159525000Y-133535000D01* +X159525000Y-134035000D01* +X158875001Y-134035000D01* +X158875000Y-134035001D01* +X158875000Y-134278569D01* +X158911508Y-134462104D01* +X158911508Y-134462106D01* +X158983118Y-134634989D01* +X158983124Y-134635001D01* +X159087087Y-134790589D01* +X159087090Y-134790593D01* +X159219406Y-134922909D01* +X159219410Y-134922912D01* +X159374998Y-135026875D01* +X159375010Y-135026881D01* +X159547888Y-135098489D01* +X159547899Y-135098492D01* +X159575000Y-135103882D01* +X159575000Y-134351988D01* +X159584940Y-134369205D01* +X159640795Y-134425060D01* +X159709204Y-134464556D01* +X159785504Y-134485000D01* +X159864496Y-134485000D01* +X159940796Y-134464556D01* +X160009205Y-134425060D01* +X160065060Y-134369205D01* +X160075000Y-134351988D01* +X160075000Y-135103881D01* +X160102100Y-135098492D01* +X160102111Y-135098489D01* +X160274989Y-135026881D01* +X160275001Y-135026875D01* +X160430589Y-134922912D01* +X160430593Y-134922909D01* +X160562909Y-134790593D01* +X160562912Y-134790589D01* +X160666875Y-134635001D01* +X160666881Y-134634989D01* +X160738491Y-134462106D01* +X160738491Y-134462104D01* +X160774999Y-134278569D01* +X160775000Y-134278565D01* +X160775000Y-134035001D01* +X160774999Y-134035000D01* +X160125000Y-134035000D01* +X160125000Y-133535000D01* +X160774999Y-133535000D01* +X160775000Y-133534999D01* +X160775000Y-133291434D01* +X160774999Y-133291430D01* +X160738491Y-133107895D01* +X160738491Y-133107893D01* +X160666881Y-132935010D01* +X160666875Y-132934998D01* +X160562912Y-132779410D01* +X160562909Y-132779406D01* +X160430593Y-132647090D01* +X160430589Y-132647087D01* +X160275001Y-132543124D01* +X160274992Y-132543120D01* +X160102105Y-132471508D01* +X160075000Y-132466116D01* +X160075000Y-133218011D01* +X160065060Y-133200795D01* +X160009205Y-133144940D01* +X159940796Y-133105444D01* +X159864496Y-133085000D01* +X159785504Y-133085000D01* +X159709204Y-133105444D01* +X159640795Y-133144940D01* +X159584940Y-133200795D01* +X159575000Y-133218011D01* +X159575000Y-132466116D01* +X159547894Y-132471508D01* +X159375007Y-132543120D01* +X159374998Y-132543124D01* +X159219410Y-132647087D01* +X159219406Y-132647090D01* +X159087090Y-132779406D01* +X159087087Y-132779410D01* +X158983124Y-132934998D01* +X158983118Y-132935010D01* +X158911508Y-133107893D01* +X158911508Y-133107895D01* +X158875000Y-133291430D01* +X142812831Y-133291430D01* +X144074765Y-132029496D01* +X144129282Y-132001719D01* +X144144769Y-132000500D01* +X151549829Y-132000500D01* +X151607885Y-131976451D01* +X151641897Y-131962364D01* +X154042831Y-129561430D01* +X158875000Y-129561430D01* +X158875000Y-130154999D01* +X158875001Y-130155000D01* +X159525000Y-130155000D01* +X159525000Y-130655000D01* +X158875001Y-130655000D01* +X158875000Y-130655001D01* +X158875000Y-131248569D01* +X158911508Y-131432104D01* +X158911508Y-131432106D01* +X158983118Y-131604989D01* +X158983124Y-131605001D01* +X159087087Y-131760589D01* +X159087090Y-131760593D01* +X159219406Y-131892909D01* +X159219410Y-131892912D01* +X159374998Y-131996875D01* +X159375010Y-131996881D01* +X159547888Y-132068489D01* +X159547899Y-132068492D01* +X159575000Y-132073882D01* +X159575000Y-131321988D01* +X159584940Y-131339205D01* +X159640795Y-131395060D01* +X159709204Y-131434556D01* +X159785504Y-131455000D01* +X159864496Y-131455000D01* +X159940796Y-131434556D01* +X160009205Y-131395060D01* +X160065060Y-131339205D01* +X160075000Y-131321988D01* +X160075000Y-132073881D01* +X160102100Y-132068492D01* +X160102111Y-132068489D01* +X160274989Y-131996881D01* +X160275001Y-131996875D01* +X160430589Y-131892912D01* +X160430593Y-131892909D01* +X160562909Y-131760593D01* +X160562912Y-131760589D01* +X160666879Y-131604994D01* +X160671571Y-131593666D01* +X160711306Y-131547139D01* +X160770801Y-131532854D01* +X160800922Y-131540085D01* +X160927065Y-131592335D01* +X161091279Y-131624999D01* +X161091283Y-131625000D01* +X161258717Y-131625000D01* +X161258720Y-131624999D01* +X161422933Y-131592335D01* +X161422939Y-131592333D01* +X161575559Y-131529114D01* +X160998223Y-130951777D01* +X160781664Y-130735218D01* +X160975000Y-130735218D01* +X160975000Y-130814782D01* +X161005448Y-130888291D01* +X161061709Y-130944552D01* +X161135218Y-130975000D01* +X161214782Y-130975000D01* +X161288291Y-130944552D01* +X161344552Y-130888291D01* +X161375000Y-130814782D01* +X161375000Y-130735218D01* +X161344552Y-130661709D01* +X161288291Y-130605448D01* +X161214782Y-130575000D01* +X161135218Y-130575000D01* +X161061709Y-130605448D01* +X161005448Y-130661709D01* +X160975000Y-130735218D01* +X160781664Y-130735218D01* +X160392939Y-130346493D01* +X160365162Y-130291976D01* +X160374733Y-130231544D01* +X160392940Y-130206485D01* +X160499425Y-130100000D01* +X160853555Y-130100000D01* +X161175000Y-130421445D01* +X161496445Y-130100000D01* +X161175000Y-129778555D01* +X160853555Y-130100000D01* +X160499425Y-130100000D01* +X160392939Y-129993514D01* +X160365162Y-129938997D01* +X160374733Y-129878565D01* +X160392939Y-129853506D01* +X160821446Y-129424999D01* +X160781665Y-129385218D01* +X160975000Y-129385218D01* +X160975000Y-129464782D01* +X161005448Y-129538291D01* +X161061709Y-129594552D01* +X161135218Y-129625000D01* +X161214782Y-129625000D01* +X161288291Y-129594552D01* +X161344552Y-129538291D01* +X161375000Y-129464782D01* +X161375000Y-129385218D01* +X161344552Y-129311709D01* +X161288291Y-129255448D01* +X161214782Y-129225000D01* +X161135218Y-129225000D01* +X161061709Y-129255448D01* +X161005448Y-129311709D01* +X160975000Y-129385218D01* +X160781665Y-129385218D01* +X160392939Y-128996492D01* +X160365162Y-128941976D01* +X160373089Y-128891919D01* +X160371692Y-128877733D01* +X160274991Y-128813120D01* +X160231087Y-128794934D01* +X160102105Y-128741508D01* +X160075000Y-128736116D01* +X160075000Y-129488011D01* +X160065060Y-129470795D01* +X160009205Y-129414940D01* +X159940796Y-129375444D01* +X159864496Y-129355000D01* +X159785504Y-129355000D01* +X159709204Y-129375444D01* +X159640795Y-129414940D01* +X159584940Y-129470795D01* +X159575000Y-129488011D01* +X159575000Y-128736116D01* +X159547894Y-128741508D01* +X159375007Y-128813120D01* +X159374998Y-128813124D01* +X159219410Y-128917087D01* +X159219406Y-128917090D01* +X159087090Y-129049406D01* +X159087087Y-129049410D01* +X158983124Y-129204998D01* +X158983118Y-129205010D01* +X158911508Y-129377893D01* +X158911508Y-129377895D01* +X158875000Y-129561430D01* +X154042831Y-129561430D01* +X154933378Y-128670883D01* +X160774438Y-128670883D01* +X161175000Y-129071445D01* +X161575560Y-128670884D01* +X161575560Y-128670883D01* +X161422936Y-128607665D01* +X161258720Y-128575000D01* +X161091279Y-128575000D01* +X160927064Y-128607665D01* +X160927062Y-128607665D01* +X160774438Y-128670883D01* +X154933378Y-128670883D01* +X156062364Y-127541897D01* +X156100500Y-127449828D01* +X156100500Y-127350172D01* +X156100500Y-92844769D01* +X156119407Y-92786578D01* +X156129496Y-92774765D01* +X157113570Y-91790691D01* +X163349500Y-91790691D01* +X163349500Y-91909309D01* +X163358698Y-91943635D01* +X163380202Y-92023890D01* +X163439507Y-92126608D01* +X163439509Y-92126610D01* +X163439511Y-92126613D01* +X163523387Y-92210489D01* +X163523389Y-92210490D01* +X163523391Y-92210492D01* +X163626110Y-92269797D01* +X163626111Y-92269797D01* +X163626114Y-92269799D01* +X163740691Y-92300500D01* +X163740693Y-92300500D01* +X163859307Y-92300500D01* +X163859309Y-92300500D01* +X163973886Y-92269799D01* +X163973888Y-92269797D01* +X163973890Y-92269797D01* +X164076608Y-92210492D01* +X164076608Y-92210491D01* +X164076613Y-92210489D01* +X164160489Y-92126613D01* +X164166878Y-92115547D01* +X164219797Y-92023890D01* +X164219797Y-92023888D01* +X164219799Y-92023886D01* +X164250500Y-91909309D01* +X164250500Y-91790691D01* +X164219799Y-91676114D01* +X164219797Y-91676111D01* +X164219797Y-91676109D01* +X164160492Y-91573391D01* +X164160490Y-91573389D01* +X164160489Y-91573387D01* +X164076613Y-91489511D01* +X164076610Y-91489509D01* +X164076608Y-91489507D01* +X163973889Y-91430202D01* +X163973890Y-91430202D01* +X163960351Y-91426574D01* +X163859309Y-91399500D01* +X163740691Y-91399500D01* +X163699348Y-91410578D01* +X163626109Y-91430202D01* +X163523391Y-91489507D01* +X163439507Y-91573391D01* +X163380202Y-91676109D01* +X163366996Y-91725395D01* +X163349500Y-91790691D01* +X157113570Y-91790691D01* +X164680496Y-84223765D01* +X164735013Y-84195988D01* +X164795445Y-84205559D01* +X164838710Y-84248824D01* +X164849500Y-84293769D01* +X164849500Y-108323341D01* +X164830593Y-108381532D01* +X164781093Y-108417496D01* +X164719907Y-108417496D01* +X164680498Y-108393346D01* +X164675863Y-108388711D01* +X164675860Y-108388709D01* +X164675858Y-108388707D01* +X164573139Y-108329402D01* +X164573140Y-108329402D01* +X164550520Y-108323341D01* +X164458559Y-108298700D01* +X164339941Y-108298700D01* +X164269817Y-108317489D01* +X164225359Y-108329402D01* +X164122641Y-108388707D01* +X164038757Y-108472591D01* +X163979452Y-108575309D01* +X163979451Y-108575314D01* +X163948750Y-108689891D01* +X163948750Y-108808509D01* +X163975009Y-108906509D01* +X163979452Y-108923090D01* +X164038757Y-109025808D01* +X164038759Y-109025810D01* +X164038761Y-109025813D01* +X164122637Y-109109689D01* +X164122639Y-109109690D01* +X164122641Y-109109692D01* +X164225360Y-109168997D01* +X164225361Y-109168997D01* +X164225364Y-109168999D01* +X164339941Y-109199700D01* +X164339943Y-109199700D01* +X164458557Y-109199700D01* +X164458559Y-109199700D01* +X164573136Y-109168999D01* +X164573138Y-109168997D01* +X164573140Y-109168997D01* +X164675858Y-109109692D01* +X164675858Y-109109691D01* +X164675863Y-109109689D01* +X164680498Y-109105053D01* +X164735013Y-109077278D01* +X164795445Y-109086849D01* +X164838710Y-109130114D01* +X164849500Y-109175059D01* +X164849500Y-126705231D01* +X164830593Y-126763422D01* +X164820504Y-126775234D01* +X163583103Y-128012635D01* +X163583103Y-128012636D01* +X163583102Y-128012635D01* +X163512635Y-128083103D01* +X163474500Y-128175171D01* +X163474500Y-128934540D01* +X163455593Y-128992731D01* +X163441560Y-129008277D01* +X163433902Y-129015137D01* +X163417686Y-129024500D01* +X163368076Y-129074109D01* +X163366060Y-129075916D01* +X163340445Y-129087243D01* +X163315487Y-129099960D01* +X163312690Y-129099517D01* +X163310102Y-129100662D01* +X163282727Y-129094771D01* +X163255055Y-129090389D01* +X163251981Y-129088155D01* +X163250286Y-129087791D01* +X163248061Y-129085308D01* +X163229999Y-129072185D01* +X163182314Y-129024500D01* +X163182311Y-129024498D01* +X163182309Y-129024496D01* +X163068189Y-128958609D01* +X163068191Y-128958609D01* +X163006114Y-128941976D01* +X162940892Y-128924500D01* +X162809108Y-128924500D01* +X162743886Y-128941976D01* +X162681809Y-128958609D01* +X162567690Y-129024496D01* +X162567689Y-129024497D01* +X162567686Y-129024499D01* +X162567686Y-129024500D01* +X162520001Y-129072184D01* +X162465487Y-129099960D01* +X162405055Y-129090389D01* +X162379999Y-129072185D01* +X162332314Y-129024500D01* +X162332311Y-129024498D01* +X162332309Y-129024496D01* +X162218189Y-128958609D01* +X162218191Y-128958609D01* +X162156114Y-128941976D01* +X162090892Y-128924500D01* +X161959108Y-128924500D01* +X161893886Y-128941976D01* +X161831809Y-128958609D01* +X161717690Y-129024496D01* +X161624496Y-129117690D01* +X161558609Y-129231809D01* +X161546049Y-129278685D01* +X161524500Y-129359108D01* +X161524500Y-129490892D01* +X161552275Y-129594552D01* +X161558609Y-129618190D01* +X161624496Y-129732309D01* +X161624498Y-129732311D01* +X161624500Y-129732314D01* +X161717686Y-129825500D01* +X161717688Y-129825501D01* +X161717690Y-129825503D01* +X161831810Y-129891390D01* +X161831808Y-129891390D01* +X161831812Y-129891391D01* +X161831814Y-129891392D01* +X161959108Y-129925500D01* +X161959110Y-129925500D01* +X162090890Y-129925500D01* +X162090892Y-129925500D01* +X162218186Y-129891392D01* +X162218188Y-129891390D01* +X162218190Y-129891390D01* +X162332309Y-129825503D01* +X162332309Y-129825502D01* +X162332314Y-129825500D01* +X162379998Y-129777815D01* +X162434513Y-129750040D01* +X162494945Y-129759611D01* +X162520000Y-129777814D01* +X162567686Y-129825500D01* +X162567688Y-129825501D01* +X162567690Y-129825503D01* +X162681810Y-129891390D01* +X162681808Y-129891390D01* +X162681812Y-129891391D01* +X162681814Y-129891392D01* +X162809108Y-129925500D01* +X162809110Y-129925500D01* +X162940890Y-129925500D01* +X162940892Y-129925500D01* +X163068186Y-129891392D01* +X163068188Y-129891390D01* +X163068190Y-129891390D01* +X163182309Y-129825503D01* +X163182309Y-129825502D01* +X163182314Y-129825500D01* +X163229998Y-129777815D01* +X163284513Y-129750040D01* +X163344945Y-129759611D01* +X163370000Y-129777814D01* +X163417686Y-129825500D01* +X163417688Y-129825501D01* +X163417690Y-129825503D01* +X163531810Y-129891390D01* +X163531808Y-129891390D01* +X163531812Y-129891391D01* +X163531814Y-129891392D01* +X163659108Y-129925500D01* +X163659110Y-129925500D01* +X163790890Y-129925500D01* +X163790892Y-129925500D01* +X163918186Y-129891392D01* +X163918188Y-129891390D01* +X163918190Y-129891390D01* +X164032309Y-129825503D01* +X164032309Y-129825502D01* +X164032314Y-129825500D01* +X164079998Y-129777815D01* +X164134513Y-129750040D01* +X164194945Y-129759611D01* +X164220000Y-129777814D01* +X164267686Y-129825500D01* +X164267688Y-129825501D01* +X164267690Y-129825503D01* +X164381810Y-129891390D01* +X164381808Y-129891390D01* +X164381812Y-129891391D01* +X164381814Y-129891392D01* +X164509108Y-129925500D01* +X164509110Y-129925500D01* +X164640890Y-129925500D01* +X164640892Y-129925500D01* +X164768186Y-129891392D01* +X164768188Y-129891390D01* +X164768190Y-129891390D01* +X164882309Y-129825503D01* +X164882309Y-129825502D01* +X164882314Y-129825500D01* +X164929998Y-129777815D01* +X164984513Y-129750040D01* +X165044945Y-129759611D01* +X165070000Y-129777814D01* +X165117686Y-129825500D01* +X165117688Y-129825501D01* +X165117690Y-129825503D01* +X165231810Y-129891390D01* +X165231808Y-129891390D01* +X165231812Y-129891391D01* +X165231814Y-129891392D01* +X165359108Y-129925500D01* +X165359110Y-129925500D01* +X165490890Y-129925500D01* +X165490892Y-129925500D01* +X165618186Y-129891392D01* +X165618188Y-129891390D01* +X165618190Y-129891390D01* +X165732309Y-129825503D01* +X165732309Y-129825502D01* +X165732314Y-129825500D01* +X165779998Y-129777815D01* +X165791596Y-129771906D01* +X165800284Y-129762209D01* +X165818192Y-129758355D01* +X165834513Y-129750040D01* +X165847372Y-129752076D01* +X165860100Y-129749338D01* +X165875096Y-129756467D01* +X165894945Y-129759611D01* +X165916058Y-129774083D01* +X165918084Y-129775898D01* +X165967686Y-129825500D01* +X165983904Y-129834863D01* +X165991558Y-129841720D01* +X166002009Y-129859718D01* +X166015939Y-129875187D01* +X166018795Y-129888623D01* +X166022284Y-129894631D01* +X166021564Y-129901648D01* +X166024500Y-129915458D01* +X166024500Y-130284540D01* +X166005593Y-130342731D01* +X165975003Y-130370275D01* +X165967688Y-130374498D01* +X165967686Y-130374499D01* +X165967686Y-130374500D01* +X165920001Y-130422184D01* +X165865487Y-130449960D01* +X165805055Y-130440389D01* +X165779999Y-130422185D01* +X165732314Y-130374500D01* +X165732311Y-130374498D01* +X165732309Y-130374496D01* +X165618189Y-130308609D01* +X165618191Y-130308609D01* +X165556114Y-130291976D01* +X165490892Y-130274500D01* +X165359108Y-130274500D01* +X165293886Y-130291976D01* +X165231809Y-130308609D01* +X165117690Y-130374496D01* +X165117689Y-130374497D01* +X165117686Y-130374499D01* +X165117686Y-130374500D01* +X165070001Y-130422184D01* +X165015487Y-130449960D01* +X164955055Y-130440389D01* +X164929999Y-130422185D01* +X164882314Y-130374500D01* +X164882311Y-130374498D01* +X164882309Y-130374496D01* +X164768189Y-130308609D01* +X164768191Y-130308609D01* +X164706114Y-130291976D01* +X164640892Y-130274500D01* +X164509108Y-130274500D01* +X164443886Y-130291976D01* +X164381809Y-130308609D01* +X164267690Y-130374496D01* +X164267689Y-130374497D01* +X164267686Y-130374499D01* +X164267686Y-130374500D01* +X164220001Y-130422184D01* +X164165487Y-130449960D01* +X164105055Y-130440389D01* +X164079999Y-130422185D01* +X164032314Y-130374500D01* +X164032311Y-130374498D01* +X164032309Y-130374496D01* +X163918189Y-130308609D01* +X163918191Y-130308609D01* +X163856114Y-130291976D01* +X163790892Y-130274500D01* +X163659108Y-130274500D01* +X163593886Y-130291976D01* +X163531809Y-130308609D01* +X163417690Y-130374496D01* +X163417689Y-130374497D01* +X163417686Y-130374499D01* +X163417686Y-130374500D01* +X163370001Y-130422184D01* +X163315487Y-130449960D01* +X163255055Y-130440389D01* +X163229999Y-130422185D01* +X163182314Y-130374500D01* +X163182311Y-130374498D01* +X163182309Y-130374496D01* +X163068189Y-130308609D01* +X163068191Y-130308609D01* +X163006114Y-130291976D01* +X162940892Y-130274500D01* +X162809108Y-130274500D01* +X162743886Y-130291976D01* +X162681809Y-130308609D01* +X162567690Y-130374496D01* +X162567689Y-130374497D01* +X162567686Y-130374499D01* +X162567686Y-130374500D01* +X162520001Y-130422184D01* +X162465487Y-130449960D01* +X162405055Y-130440389D01* +X162379999Y-130422185D01* +X162332314Y-130374500D01* +X162332311Y-130374498D01* +X162332309Y-130374496D01* +X162218189Y-130308609D01* +X162218191Y-130308609D01* +X162156114Y-130291976D01* +X162090892Y-130274500D01* +X161959108Y-130274500D01* +X161893886Y-130291976D01* +X161831809Y-130308609D01* +X161717690Y-130374496D01* +X161624496Y-130467690D01* +X161558609Y-130581809D01* +X161558608Y-130581814D01* +X161524500Y-130709108D01* +X161524500Y-130840892D01* +X161552275Y-130944552D01* +X161558609Y-130968190D01* +X161624496Y-131082309D01* +X161624498Y-131082311D01* +X161624500Y-131082314D01* +X161717686Y-131175500D01* +X161717688Y-131175501D01* +X161717690Y-131175503D01* +X161831810Y-131241390D01* +X161831808Y-131241390D01* +X161831812Y-131241391D01* +X161831814Y-131241392D01* +X161959108Y-131275500D01* +X161959110Y-131275500D01* +X162090890Y-131275500D01* +X162090892Y-131275500D01* +X162218186Y-131241392D01* +X162218188Y-131241390D01* +X162218190Y-131241390D01* +X162332309Y-131175503D01* +X162332309Y-131175502D01* +X162332314Y-131175500D01* +X162379998Y-131127815D01* +X162434513Y-131100040D01* +X162494945Y-131109611D01* +X162520000Y-131127814D01* +X162567686Y-131175500D01* +X162567688Y-131175501D01* +X162567690Y-131175503D01* +X162681810Y-131241390D01* +X162681808Y-131241390D01* +X162681812Y-131241391D01* +X162681814Y-131241392D01* +X162809108Y-131275500D01* +X162809110Y-131275500D01* +X162940890Y-131275500D01* +X162940892Y-131275500D01* +X163068186Y-131241392D01* +X163068188Y-131241390D01* +X163068190Y-131241390D01* +X163182309Y-131175503D01* +X163182309Y-131175502D01* +X163182314Y-131175500D01* +X163229998Y-131127815D01* +X163284513Y-131100040D01* +X163344945Y-131109611D01* +X163370000Y-131127814D01* +X163417686Y-131175500D01* +X163417688Y-131175501D01* +X163417690Y-131175503D01* +X163531810Y-131241390D01* +X163531808Y-131241390D01* +X163531812Y-131241391D01* +X163531814Y-131241392D01* +X163659108Y-131275500D01* +X163659110Y-131275500D01* +X163790890Y-131275500D01* +X163790892Y-131275500D01* +X163918186Y-131241392D01* +X163918188Y-131241390D01* +X163918190Y-131241390D01* +X164032309Y-131175503D01* +X164032309Y-131175502D01* +X164032314Y-131175500D01* +X164079998Y-131127815D01* +X164134513Y-131100040D01* +X164194945Y-131109611D01* +X164220000Y-131127814D01* +X164267686Y-131175500D01* +X164267688Y-131175501D01* +X164267690Y-131175503D01* +X164381810Y-131241390D01* +X164381808Y-131241390D01* +X164381812Y-131241391D01* +X164381814Y-131241392D01* +X164509108Y-131275500D01* +X164509110Y-131275500D01* +X164640890Y-131275500D01* +X164640892Y-131275500D01* +X164768186Y-131241392D01* +X164768188Y-131241390D01* +X164768190Y-131241390D01* +X164882309Y-131175503D01* +X164882309Y-131175502D01* +X164882314Y-131175500D01* +X164929998Y-131127815D01* +X164941596Y-131121906D01* +X164950284Y-131112209D01* +X164968192Y-131108355D01* +X164984513Y-131100040D01* +X164997372Y-131102076D01* +X165010100Y-131099338D01* +X165025096Y-131106467D01* +X165044945Y-131109611D01* +X165066058Y-131124083D01* +X165068084Y-131125898D01* +X165117686Y-131175500D01* +X165133904Y-131184863D01* +X165141558Y-131191720D01* +X165152009Y-131209718D01* +X165165939Y-131225187D01* +X165168795Y-131238623D01* +X165172284Y-131244631D01* +X165171564Y-131251648D01* +X165174500Y-131265458D01* +X165174500Y-133374828D01* +X165212634Y-133466894D01* +X165212635Y-133466895D01* +X165212636Y-133466897D01* +X168087636Y-136341897D01* +X168087635Y-136341897D01* +X168158103Y-136412364D01* +X168250171Y-136450500D01* +X168250172Y-136450500D01* +X168349829Y-136450500D01* +X168407885Y-136426451D01* +X168441897Y-136412364D01* +X170462364Y-134391897D01* +X170500500Y-134299828D01* +X170500500Y-134200173D01* +X170500500Y-132741578D01* +X171241150Y-132741578D01* +X171241150Y-134904621D01* +X171241151Y-134904623D01* +X171256002Y-134998399D01* +X171256004Y-134998404D01* +X171313600Y-135111442D01* +X171403308Y-135201150D01* +X171516346Y-135258746D01* +X171610131Y-135273600D01* +X173773168Y-135273599D01* +X173773171Y-135273599D01* +X173773172Y-135273598D01* +X173820061Y-135266172D01* +X173866949Y-135258747D01* +X173866949Y-135258746D01* +X173866954Y-135258746D01* +X173979992Y-135201150D01* +X174069700Y-135111442D01* +X174127296Y-134998404D01* +X174142150Y-134904619D01* +X174142149Y-133705121D01* +X175891650Y-133705121D01* +X175891650Y-133941078D01* +X175922448Y-134175008D01* +X175922448Y-134175013D01* +X175983517Y-134402924D01* +X175983521Y-134402937D01* +X176073813Y-134620924D01* +X176073815Y-134620929D01* +X176191792Y-134825269D01* +X176254370Y-134906824D01* +X177090607Y-134070586D01* +X177115628Y-134130990D01* +X177186762Y-134237451D01* +X177277299Y-134327988D01* +X177383760Y-134399122D01* +X177444160Y-134424141D01* +X176607924Y-135260378D01* +X176607923Y-135260378D01* +X176689480Y-135322957D01* +X176893820Y-135440934D01* +X176893825Y-135440936D01* +X177111812Y-135531228D01* +X177111825Y-135531232D01* +X177339738Y-135592301D01* +X177573671Y-135623099D01* +X177573673Y-135623100D01* +X177809627Y-135623100D01* +X177809628Y-135623099D01* +X178043558Y-135592301D01* +X178043563Y-135592301D01* +X178271474Y-135531232D01* +X178271487Y-135531228D01* +X178489474Y-135440936D01* +X178489479Y-135440934D01* +X178693815Y-135322960D01* +X178775374Y-135260378D01* +X177939137Y-134424141D01* +X177999540Y-134399122D01* +X178106001Y-134327988D01* +X178196538Y-134237451D01* +X178267672Y-134130990D01* +X178292691Y-134070587D01* +X179128928Y-134906824D01* +X179191510Y-134825265D01* +X179309484Y-134620929D01* +X179309486Y-134620924D01* +X179399778Y-134402937D01* +X179399782Y-134402924D01* +X179460851Y-134175013D01* +X179460851Y-134175008D01* +X179491649Y-133941078D01* +X179491650Y-133941077D01* +X179491650Y-133708939D01* +X181241150Y-133708939D01* +X181241150Y-133937260D01* +X181276864Y-134162755D01* +X181347419Y-134379899D01* +X181451070Y-134583327D01* +X181451074Y-134583333D01* +X181585266Y-134768031D01* +X181585268Y-134768033D01* +X181585271Y-134768037D01* +X181746713Y-134929479D01* +X181746716Y-134929481D01* +X181746718Y-134929483D01* +X181790528Y-134961313D01* +X181931422Y-135063679D01* +X182134851Y-135167331D01* +X182351990Y-135237884D01* +X182351991Y-135237884D01* +X182351994Y-135237885D01* +X182577490Y-135273600D01* +X182577493Y-135273600D01* +X182805810Y-135273600D01* +X183031305Y-135237885D01* +X183031306Y-135237884D01* +X183031310Y-135237884D01* +X183248449Y-135167331D01* +X183451878Y-135063679D01* +X183636587Y-134929479D01* +X183798029Y-134768037D01* +X183932229Y-134583328D01* +X184035881Y-134379899D01* +X184106434Y-134162760D01* +X184126669Y-134035000D01* +X184142150Y-133937260D01* +X184142150Y-133708939D01* +X186241150Y-133708939D01* +X186241150Y-133937260D01* +X186276864Y-134162755D01* +X186347419Y-134379899D01* +X186451070Y-134583327D01* +X186451074Y-134583333D01* +X186585266Y-134768031D01* +X186585268Y-134768033D01* +X186585271Y-134768037D01* +X186746713Y-134929479D01* +X186746716Y-134929481D01* +X186746718Y-134929483D01* +X186790528Y-134961313D01* +X186931422Y-135063679D01* +X187134851Y-135167331D01* +X187351990Y-135237884D01* +X187351991Y-135237884D01* +X187351994Y-135237885D01* +X187577490Y-135273600D01* +X187577493Y-135273600D01* +X187805810Y-135273600D01* +X188031305Y-135237885D01* +X188031306Y-135237884D01* +X188031310Y-135237884D01* +X188248449Y-135167331D01* +X188451878Y-135063679D01* +X188636587Y-134929479D01* +X188798029Y-134768037D01* +X188932229Y-134583328D01* +X189035881Y-134379899D01* +X189106434Y-134162760D01* +X189126669Y-134035000D01* +X189142150Y-133937260D01* +X189142150Y-133708939D01* +X191241150Y-133708939D01* +X191241150Y-133937260D01* +X191276864Y-134162755D01* +X191347419Y-134379899D01* +X191451070Y-134583327D01* +X191451074Y-134583333D01* +X191585266Y-134768031D01* +X191585268Y-134768033D01* +X191585271Y-134768037D01* +X191746713Y-134929479D01* +X191746716Y-134929481D01* +X191746718Y-134929483D01* +X191790528Y-134961313D01* +X191931422Y-135063679D01* +X192134851Y-135167331D01* +X192351990Y-135237884D01* +X192351991Y-135237884D01* +X192351994Y-135237885D01* +X192577490Y-135273600D01* +X192577493Y-135273600D01* +X192805810Y-135273600D01* +X193031305Y-135237885D01* +X193031306Y-135237884D01* +X193031310Y-135237884D01* +X193142334Y-135201810D01* +X209341150Y-135201810D01* +X209341150Y-135444389D01* +X209372811Y-135684881D01* +X209372811Y-135684886D01* +X209435594Y-135919192D01* +X209435598Y-135919205D01* +X209528422Y-136143304D01* +X209528424Y-136143308D01* +X209528426Y-136143312D01* +X209632227Y-136323100D01* +X209649716Y-136353392D01* +X209797379Y-136545831D01* +X209797381Y-136545833D01* +X209797385Y-136545838D01* +X209968912Y-136717365D01* +X209968916Y-136717368D01* +X209968918Y-136717370D01* +X210161357Y-136865033D01* +X210161361Y-136865036D01* +X210371438Y-136986324D01* +X210595550Y-137079154D01* +X210829861Y-137141938D01* +X211070362Y-137173600D01* +X211070363Y-137173600D01* +X211312937Y-137173600D01* +X211312938Y-137173600D01* +X211553439Y-137141938D01* +X211787750Y-137079154D01* +X212011862Y-136986324D01* +X212221939Y-136865036D01* +X212414388Y-136717365D01* +X212585915Y-136545838D01* +X212733586Y-136353389D01* +X212854874Y-136143312D01* +X212947704Y-135919200D01* +X213010488Y-135684889D01* +X213042150Y-135444388D01* +X213042150Y-135201812D01* +X213010488Y-134961311D01* +X212947704Y-134727000D01* +X212854874Y-134502888D01* +X212733586Y-134292811D01* +X212585915Y-134100362D01* +X212414388Y-133928835D01* +X212414383Y-133928831D01* +X212414381Y-133928829D01* +X212221942Y-133781166D01* +X212193490Y-133764739D01* +X212011862Y-133659876D01* +X212011858Y-133659874D01* +X212011854Y-133659872D01* +X211787755Y-133567048D01* +X211787754Y-133567047D01* +X211787750Y-133567046D01* +X211553439Y-133504262D01* +X211553436Y-133504261D01* +X211553434Y-133504261D01* +X211312939Y-133472600D01* +X211312938Y-133472600D01* +X211070362Y-133472600D01* +X211070360Y-133472600D01* +X210829868Y-133504261D01* +X210829863Y-133504261D01* +X210595557Y-133567044D01* +X210595544Y-133567048D01* +X210371445Y-133659872D01* +X210161357Y-133781166D01* +X209968918Y-133928829D01* +X209797379Y-134100368D01* +X209649716Y-134292807D01* +X209528422Y-134502895D01* +X209435598Y-134726994D01* +X209435594Y-134727007D01* +X209372811Y-134961313D01* +X209372811Y-134961318D01* +X209341150Y-135201810D01* +X193142334Y-135201810D01* +X193248449Y-135167331D01* +X193451878Y-135063679D01* +X193636587Y-134929479D01* +X193798029Y-134768037D01* +X193932229Y-134583328D01* +X194035881Y-134379899D01* +X194106434Y-134162760D01* +X194126669Y-134035000D01* +X194142150Y-133937260D01* +X194142150Y-133708939D01* +X194106435Y-133483444D01* +X194082165Y-133408749D01* +X194035881Y-133266301D01* +X194018684Y-133232550D01* +X198041150Y-133232550D01* +X198041150Y-133413649D01* +X198069478Y-133592506D01* +X198125438Y-133764737D01* +X198206976Y-133924765D01* +X198207654Y-133926094D01* +X198314097Y-134072601D01* +X198442149Y-134200653D01* +X198588656Y-134307096D01* +X198750011Y-134389311D01* +X198922241Y-134445271D01* +X198993786Y-134456602D01* +X199101101Y-134473600D01* +X199101104Y-134473600D01* +X199282199Y-134473600D01* +X199371627Y-134459435D01* +X199461059Y-134445271D01* +X199633289Y-134389311D01* +X199794644Y-134307096D01* +X199941151Y-134200653D01* +X200069203Y-134072601D01* +X200175646Y-133926094D01* +X200257861Y-133764739D01* +X200313821Y-133592509D01* +X200333716Y-133466897D01* +X200342150Y-133413649D01* +X200342150Y-133232550D01* +X204541150Y-133232550D01* +X204541150Y-133413649D01* +X204569478Y-133592506D01* +X204625438Y-133764737D01* +X204706976Y-133924765D01* +X204707654Y-133926094D01* +X204814097Y-134072601D01* +X204942149Y-134200653D01* +X205088656Y-134307096D01* +X205250011Y-134389311D01* +X205422241Y-134445271D01* +X205493786Y-134456602D01* +X205601101Y-134473600D01* +X205601104Y-134473600D01* +X205782199Y-134473600D01* +X205871627Y-134459435D01* +X205961059Y-134445271D01* +X206133289Y-134389311D01* +X206294644Y-134307096D01* +X206441151Y-134200653D01* +X206569203Y-134072601D01* +X206675646Y-133926094D01* +X206757861Y-133764739D01* +X206813821Y-133592509D01* +X206833716Y-133466897D01* +X206842150Y-133413649D01* +X206842150Y-133232550D01* +X206813821Y-133053693D01* +X206813821Y-133053691D01* +X206757861Y-132881461D01* +X206675646Y-132720106D01* +X206569203Y-132573599D01* +X206441151Y-132445547D01* +X206294644Y-132339104D01* +X206294643Y-132339103D01* +X206294641Y-132339102D01* +X206133287Y-132256888D01* +X205961056Y-132200928D01* +X205782199Y-132172600D01* +X205782196Y-132172600D01* +X205601104Y-132172600D01* +X205601101Y-132172600D01* +X205422243Y-132200928D01* +X205250012Y-132256888D01* +X205088658Y-132339102D01* +X205042552Y-132372600D01* +X204942149Y-132445547D01* +X204814097Y-132573599D01* +X204807616Y-132582520D01* +X204707652Y-132720108D01* +X204625438Y-132881462D01* +X204569478Y-133053693D01* +X204541150Y-133232550D01* +X200342150Y-133232550D01* +X200313821Y-133053693D01* +X200313821Y-133053691D01* +X200257861Y-132881461D01* +X200175646Y-132720106D01* +X200069203Y-132573599D01* +X199941151Y-132445547D01* +X199794644Y-132339104D01* +X199794643Y-132339103D01* +X199794641Y-132339102D01* +X199633287Y-132256888D01* +X199461056Y-132200928D01* +X199282199Y-132172600D01* +X199282196Y-132172600D01* +X199101104Y-132172600D01* +X199101101Y-132172600D01* +X198922243Y-132200928D01* +X198750012Y-132256888D01* +X198588658Y-132339102D01* +X198542552Y-132372600D01* +X198442149Y-132445547D01* +X198314097Y-132573599D01* +X198307616Y-132582520D01* +X198207652Y-132720108D01* +X198125438Y-132881462D01* +X198069478Y-133053693D01* +X198041150Y-133232550D01* +X194018684Y-133232550D01* +X193932229Y-133062872D01* +X193904913Y-133025275D01* +X193798033Y-132878168D01* +X193798031Y-132878166D01* +X193798029Y-132878163D01* +X193636587Y-132716721D01* +X193636583Y-132716718D01* +X193636581Y-132716716D01* +X193451883Y-132582524D01* +X193451877Y-132582520D01* +X193248449Y-132478869D01* +X193031305Y-132408314D01* +X192805810Y-132372600D01* +X192805807Y-132372600D01* +X192577493Y-132372600D01* +X192577490Y-132372600D01* +X192351994Y-132408314D01* +X192134850Y-132478869D01* +X191931422Y-132582520D01* +X191931416Y-132582524D01* +X191746718Y-132716716D01* +X191585266Y-132878168D01* +X191451074Y-133062866D01* +X191451070Y-133062872D01* +X191347419Y-133266300D01* +X191276864Y-133483444D01* +X191241150Y-133708939D01* +X189142150Y-133708939D01* +X189106435Y-133483444D01* +X189082165Y-133408749D01* +X189035881Y-133266301D01* +X188932229Y-133062872D01* +X188904913Y-133025275D01* +X188798033Y-132878168D01* +X188798031Y-132878166D01* +X188798029Y-132878163D01* +X188636587Y-132716721D01* +X188636583Y-132716718D01* +X188636581Y-132716716D01* +X188451883Y-132582524D01* +X188451877Y-132582520D01* +X188248449Y-132478869D01* +X188031305Y-132408314D01* +X187805810Y-132372600D01* +X187805807Y-132372600D01* +X187577493Y-132372600D01* +X187577490Y-132372600D01* +X187351994Y-132408314D01* +X187134850Y-132478869D01* +X186931422Y-132582520D01* +X186931416Y-132582524D01* +X186746718Y-132716716D01* +X186585266Y-132878168D01* +X186451074Y-133062866D01* +X186451070Y-133062872D01* +X186347419Y-133266300D01* +X186276864Y-133483444D01* +X186241150Y-133708939D01* +X184142150Y-133708939D01* +X184106435Y-133483444D01* +X184082165Y-133408749D01* +X184035881Y-133266301D01* +X183932229Y-133062872D01* +X183904913Y-133025275D01* +X183798033Y-132878168D01* +X183798031Y-132878166D01* +X183798029Y-132878163D01* +X183636587Y-132716721D01* +X183636583Y-132716718D01* +X183636581Y-132716716D01* +X183451883Y-132582524D01* +X183451877Y-132582520D01* +X183248449Y-132478869D01* +X183031305Y-132408314D01* +X182805810Y-132372600D01* +X182805807Y-132372600D01* +X182577493Y-132372600D01* +X182577490Y-132372600D01* +X182351994Y-132408314D01* +X182134850Y-132478869D01* +X181931422Y-132582520D01* +X181931416Y-132582524D01* +X181746718Y-132716716D01* +X181585266Y-132878168D01* +X181451074Y-133062866D01* +X181451070Y-133062872D01* +X181347419Y-133266300D01* +X181276864Y-133483444D01* +X181241150Y-133708939D01* +X179491650Y-133708939D01* +X179491650Y-133705123D01* +X179491649Y-133705121D01* +X179460851Y-133471191D01* +X179460851Y-133471186D01* +X179399782Y-133243275D01* +X179399778Y-133243262D01* +X179309486Y-133025275D01* +X179309484Y-133025270D01* +X179191507Y-132820930D01* +X179128928Y-132739374D01* +X178292691Y-133575610D01* +X178267672Y-133515210D01* +X178196538Y-133408749D01* +X178106001Y-133318212D01* +X177999540Y-133247078D01* +X177939136Y-133222057D01* +X178775374Y-132385820D01* +X178775375Y-132385820D01* +X178693819Y-132323242D01* +X178489479Y-132205265D01* +X178489474Y-132205263D01* +X178271487Y-132114971D01* +X178271474Y-132114967D01* +X178043561Y-132053898D01* +X177809628Y-132023100D01* +X177573671Y-132023100D01* +X177339741Y-132053898D01* +X177339736Y-132053898D01* +X177111825Y-132114967D01* +X177111812Y-132114971D01* +X176893825Y-132205263D01* +X176893820Y-132205265D01* +X176689481Y-132323241D01* +X176607924Y-132385820D01* +X177444162Y-133222058D01* +X177383760Y-133247078D01* +X177277299Y-133318212D01* +X177186762Y-133408749D01* +X177115628Y-133515210D01* +X177090608Y-133575612D01* +X176254370Y-132739374D01* +X176191791Y-132820931D01* +X176073815Y-133025270D01* +X176073813Y-133025275D01* +X175983521Y-133243262D01* +X175983517Y-133243275D01* +X175922448Y-133471186D01* +X175922448Y-133471191D01* +X175891650Y-133705121D01* +X174142149Y-133705121D01* +X174142149Y-132741582D01* +X174142149Y-132741581D01* +X174142149Y-132741578D01* +X174142148Y-132741576D01* +X174127297Y-132647800D01* +X174127296Y-132647798D01* +X174127296Y-132647796D01* +X174069700Y-132534758D01* +X173979992Y-132445050D01* +X173866954Y-132387454D01* +X173866955Y-132387454D01* +X173773171Y-132372600D01* +X171610128Y-132372600D01* +X171610126Y-132372601D01* +X171516350Y-132387452D01* +X171516345Y-132387454D01* +X171403309Y-132445049D01* +X171313599Y-132534759D01* +X171256004Y-132647795D01* +X171241150Y-132741578D01* +X170500500Y-132741578D01* +X170500500Y-128300172D01* +X170462364Y-128208103D01* +X170429432Y-128175171D01* +X170391897Y-128137635D01* +X170391897Y-128137636D01* +X167979496Y-125725235D01* +X167951719Y-125670718D01* +X167950500Y-125655231D01* +X167950500Y-125540692D01* +X167950500Y-125540691D01* +X167919799Y-125426114D01* +X167919797Y-125426111D01* +X167919797Y-125426109D01* +X167860492Y-125323391D01* +X167860490Y-125323389D01* +X167860489Y-125323387D01* +X167776613Y-125239511D01* +X167776610Y-125239509D01* +X167776608Y-125239507D01* +X167673889Y-125180202D01* +X167673890Y-125180202D01* +X167660351Y-125176574D01* +X167559309Y-125149500D01* +X167440691Y-125149500D01* +X167370567Y-125168289D01* +X167326109Y-125180202D01* +X167223391Y-125239507D01* +X167139507Y-125323391D01* +X167080202Y-125426109D01* +X167080201Y-125426114D01* +X167049500Y-125540691D01* +X167049500Y-125659309D01* +X167057304Y-125688434D01* +X167080202Y-125773890D01* +X167139507Y-125876608D01* +X167139509Y-125876610D01* +X167139511Y-125876613D01* +X167223387Y-125960489D01* +X167223389Y-125960490D01* +X167223391Y-125960492D01* +X167326110Y-126019797D01* +X167326111Y-126019797D01* +X167326114Y-126019799D01* +X167440691Y-126050500D01* +X167440693Y-126050500D01* +X167555231Y-126050500D01* +X167613422Y-126069407D01* +X167625235Y-126079496D01* +X169970504Y-128424765D01* +X169998281Y-128479282D01* +X169999500Y-128494769D01* +X169999500Y-134105231D01* +X169980593Y-134163422D01* +X169970503Y-134175235D01* +X169531726Y-134614011D01* +X169477210Y-134641788D01* +X169416778Y-134632217D01* +X169373513Y-134588952D01* +X169363942Y-134528520D01* +X169370259Y-134506121D01* +X169388492Y-134462103D01* +X169424999Y-134278569D01* +X169425000Y-134278565D01* +X169425000Y-134035001D01* +X169424999Y-134035000D01* +X168775000Y-134035000D01* +X168775000Y-133535000D01* +X169424999Y-133535000D01* +X169425000Y-133534999D01* +X169425000Y-133291434D01* +X169424999Y-133291430D01* +X169388491Y-133107895D01* +X169388491Y-133107893D01* +X169316881Y-132935010D01* +X169316875Y-132934998D01* +X169212912Y-132779410D01* +X169212909Y-132779406D01* +X169080593Y-132647090D01* +X169080589Y-132647087D01* +X168925001Y-132543124D01* +X168924992Y-132543120D01* +X168752105Y-132471508D01* +X168725000Y-132466116D01* +X168725000Y-133218011D01* +X168715060Y-133200795D01* +X168659205Y-133144940D01* +X168590796Y-133105444D01* +X168514496Y-133085000D01* +X168435504Y-133085000D01* +X168359204Y-133105444D01* +X168290795Y-133144940D01* +X168234940Y-133200795D01* +X168225000Y-133218011D01* +X168225000Y-132466116D01* +X168197894Y-132471508D01* +X168025007Y-132543120D01* +X168024998Y-132543124D01* +X167869410Y-132647087D01* +X167869406Y-132647090D01* +X167737090Y-132779406D01* +X167737087Y-132779410D01* +X167633124Y-132934998D01* +X167633118Y-132935010D01* +X167561508Y-133107893D01* +X167561508Y-133107895D01* +X167525000Y-133291430D01* +X167525000Y-133534999D01* +X167525001Y-133535000D01* +X168175000Y-133535000D01* +X168175000Y-134035000D01* +X167525001Y-134035000D01* +X167525000Y-134035001D01* +X167525000Y-134278569D01* +X167561508Y-134462104D01* +X167561508Y-134462106D01* +X167633118Y-134634989D01* +X167633124Y-134635001D01* +X167737087Y-134790589D01* +X167737090Y-134790593D01* +X167869406Y-134922909D01* +X167869410Y-134922912D01* +X168024998Y-135026875D01* +X168025010Y-135026881D01* +X168197888Y-135098489D01* +X168197899Y-135098492D01* +X168225000Y-135103882D01* +X168225000Y-134351988D01* +X168234940Y-134369205D01* +X168290795Y-134425060D01* +X168359204Y-134464556D01* +X168435504Y-134485000D01* +X168514496Y-134485000D01* +X168590796Y-134464556D01* +X168659205Y-134425060D01* +X168715060Y-134369205D01* +X168725000Y-134351988D01* +X168725000Y-135103881D01* +X168752100Y-135098492D01* +X168752107Y-135098490D01* +X168796121Y-135080259D01* +X168857117Y-135075458D01* +X168909287Y-135107427D01* +X168932702Y-135163955D01* +X168918419Y-135223450D01* +X168904011Y-135241727D01* +X168370004Y-135775735D01* +X168315487Y-135803512D01* +X168255055Y-135793941D01* +X168229996Y-135775735D01* +X165704496Y-133250235D01* +X165676719Y-133195718D01* +X165675500Y-133180231D01* +X165675500Y-131529115D01* +X166724438Y-131529115D01* +X166877065Y-131592335D01* +X167041279Y-131624999D01* +X167041283Y-131625000D01* +X167208717Y-131625000D01* +X167208720Y-131624999D01* +X167372934Y-131592335D01* +X167499077Y-131540085D01* +X167560074Y-131535284D01* +X167612243Y-131567254D01* +X167628426Y-131593661D01* +X167633119Y-131604990D01* +X167633124Y-131605001D01* +X167737087Y-131760589D01* +X167737090Y-131760593D01* +X167869406Y-131892909D01* +X167869410Y-131892912D01* +X168024998Y-131996875D01* +X168025010Y-131996881D01* +X168197888Y-132068489D01* +X168197899Y-132068492D01* +X168225000Y-132073882D01* +X168225000Y-131321988D01* +X168234940Y-131339205D01* +X168290795Y-131395060D01* +X168359204Y-131434556D01* +X168435504Y-131455000D01* +X168514496Y-131455000D01* +X168590796Y-131434556D01* +X168659205Y-131395060D01* +X168715060Y-131339205D01* +X168725000Y-131321988D01* +X168725000Y-132073881D01* +X168752100Y-132068492D01* +X168752111Y-132068489D01* +X168924989Y-131996881D01* +X168925001Y-131996875D01* +X169080589Y-131892912D01* +X169080593Y-131892909D01* +X169212909Y-131760593D01* +X169212912Y-131760589D01* +X169316875Y-131605001D01* +X169316881Y-131604989D01* +X169388491Y-131432106D01* +X169388491Y-131432104D01* +X169424999Y-131248569D01* +X169425000Y-131248565D01* +X169425000Y-130655001D01* +X169424999Y-130655000D01* +X168775000Y-130655000D01* +X168775000Y-130155000D01* +X169424999Y-130155000D01* +X169425000Y-130154999D01* +X169425000Y-129561434D01* +X169424999Y-129561430D01* +X169388491Y-129377895D01* +X169388491Y-129377893D01* +X169316881Y-129205010D01* +X169316875Y-129204998D01* +X169212912Y-129049410D01* +X169212909Y-129049406D01* +X169080593Y-128917090D01* +X169080589Y-128917087D01* +X168925001Y-128813124D01* +X168924992Y-128813120D01* +X168752105Y-128741508D01* +X168725000Y-128736116D01* +X168725000Y-129488011D01* +X168715060Y-129470795D01* +X168659205Y-129414940D01* +X168590796Y-129375444D01* +X168514496Y-129355000D01* +X168435504Y-129355000D01* +X168359204Y-129375444D01* +X168290795Y-129414940D01* +X168234940Y-129470795D01* +X168225000Y-129488011D01* +X168225000Y-128736116D01* +X168197894Y-128741508D01* +X168025006Y-128813120D01* +X167928306Y-128877733D01* +X167926618Y-128894871D01* +X167934837Y-128911002D01* +X167925266Y-128971434D01* +X167907060Y-128996492D01* +X167478554Y-129424999D01* +X167478554Y-129425000D01* +X167907060Y-129853507D01* +X167934837Y-129908023D01* +X167925266Y-129968455D01* +X167907060Y-129993513D01* +X167800574Y-130099999D01* +X167907060Y-130206485D01* +X167934837Y-130261002D01* +X167925266Y-130321434D01* +X167907060Y-130346493D01* +X167301777Y-130951777D01* +X166724438Y-131529115D01* +X165675500Y-131529115D01* +X165675500Y-131265458D01* +X165694407Y-131207267D01* +X165708442Y-131191720D01* +X165716095Y-131184863D01* +X165732314Y-131175500D01* +X165781915Y-131125898D01* +X165783942Y-131124083D01* +X165809549Y-131112759D01* +X165834513Y-131100040D01* +X165837310Y-131100483D01* +X165839900Y-131099338D01* +X165867279Y-131105229D01* +X165894945Y-131109611D01* +X165898018Y-131111843D01* +X165899716Y-131112209D01* +X165901943Y-131114695D01* +X165920000Y-131127814D01* +X165967686Y-131175500D01* +X165967688Y-131175501D01* +X165967690Y-131175503D01* +X166081810Y-131241390D01* +X166081808Y-131241390D01* +X166081812Y-131241391D01* +X166081814Y-131241392D01* +X166209108Y-131275500D01* +X166209110Y-131275500D01* +X166340890Y-131275500D01* +X166340892Y-131275500D01* +X166468186Y-131241392D01* +X166468188Y-131241390D01* +X166468190Y-131241390D01* +X166582309Y-131175503D01* +X166582309Y-131175502D01* +X166582314Y-131175500D01* +X166675500Y-131082314D01* +X166675503Y-131082309D01* +X166741390Y-130968190D01* +X166741390Y-130968188D01* +X166741392Y-130968186D01* +X166775500Y-130840892D01* +X166775500Y-130735218D01* +X166925000Y-130735218D01* +X166925000Y-130814782D01* +X166955448Y-130888291D01* +X167011709Y-130944552D01* +X167085218Y-130975000D01* +X167164782Y-130975000D01* +X167238291Y-130944552D01* +X167294552Y-130888291D01* +X167325000Y-130814782D01* +X167325000Y-130735218D01* +X167294552Y-130661709D01* +X167238291Y-130605448D01* +X167164782Y-130575000D01* +X167085218Y-130575000D01* +X167011709Y-130605448D01* +X166955448Y-130661709D01* +X166925000Y-130735218D01* +X166775500Y-130735218D01* +X166775500Y-130709108D01* +X166741392Y-130581814D01* +X166741390Y-130581811D01* +X166741390Y-130581809D01* +X166675503Y-130467690D01* +X166675501Y-130467688D01* +X166675500Y-130467686D01* +X166582314Y-130374500D01* +X166582309Y-130374497D01* +X166574997Y-130370275D01* +X166534058Y-130324804D01* +X166525500Y-130284540D01* +X166525500Y-130100000D01* +X166803555Y-130100000D01* +X167125000Y-130421445D01* +X167446445Y-130100000D01* +X167125000Y-129778555D01* +X166803555Y-130100000D01* +X166525500Y-130100000D01* +X166525500Y-129915458D01* +X166544407Y-129857267D01* +X166574999Y-129829722D01* +X166582314Y-129825500D01* +X166675500Y-129732314D01* +X166675503Y-129732309D01* +X166741390Y-129618190D01* +X166741390Y-129618188D01* +X166741392Y-129618186D01* +X166775500Y-129490892D01* +X166775500Y-129461954D01* +X166794407Y-129403763D01* +X166804496Y-129391950D01* +X166811228Y-129385218D01* +X166925000Y-129385218D01* +X166925000Y-129464782D01* +X166955448Y-129538291D01* +X167011709Y-129594552D01* +X167085218Y-129625000D01* +X167164782Y-129625000D01* +X167238291Y-129594552D01* +X167294552Y-129538291D01* +X167325000Y-129464782D01* +X167325000Y-129385218D01* +X167294552Y-129311709D01* +X167238291Y-129255448D01* +X167164782Y-129225000D01* +X167085218Y-129225000D01* +X167011709Y-129255448D01* +X166955448Y-129311709D01* +X166925000Y-129385218D01* +X166811228Y-129385218D01* +X166948223Y-129248223D01* +X167525560Y-128670884D01* +X167525560Y-128670883D01* +X167372936Y-128607665D01* +X167208720Y-128575000D01* +X167041279Y-128575000D01* +X166877065Y-128607664D01* +X166722374Y-128671739D01* +X166654501Y-128717091D01* +X166595613Y-128733699D01* +X166538209Y-128712521D01* +X166504217Y-128661647D01* +X166500500Y-128634775D01* +X166500500Y-128061359D01* +X166500501Y-128061350D01* +X166500501Y-127950172D01* +X166462364Y-127858104D01* +X166462364Y-127858103D01* +X166391897Y-127787636D01* +X166391895Y-127787635D01* +X166386253Y-127781992D01* +X166386249Y-127781989D01* +X166179496Y-127575235D01* +X166151719Y-127520719D01* +X166150500Y-127505232D01* +X166150500Y-118573099D01* +X208714418Y-118573099D01* +X208714419Y-118573100D01* +X209758638Y-118573100D01* +X209725725Y-118630107D01* +X209691650Y-118757274D01* +X209691650Y-118888926D01* +X209725725Y-119016093D01* +X209758638Y-119073100D01* +X208714419Y-119073100D01* +X208724891Y-119139222D01* +X208790554Y-119341315D01* +X208887025Y-119530652D01* +X209011927Y-119702564D01* +X209162185Y-119852822D01* +X209334097Y-119977724D01* +X209523436Y-120074196D01* +X209693478Y-120129445D01* +X209742978Y-120165409D01* +X209761886Y-120223599D01* +X209742979Y-120281790D01* +X209693479Y-120317754D01* +X209662886Y-120322600D01* +X209410128Y-120322600D01* +X209410126Y-120322601D01* +X209316350Y-120337452D01* +X209316345Y-120337454D01* +X209203309Y-120395049D01* +X209113599Y-120484759D01* +X209056004Y-120597795D01* +X209041150Y-120691578D01* +X209041150Y-121954621D01* +X209041151Y-121954623D01* +X209056002Y-122048399D01* +X209056004Y-122048404D01* +X209113600Y-122161442D01* +X209203308Y-122251150D01* +X209316346Y-122308746D01* +X209410131Y-122323600D01* +X210973168Y-122323599D01* +X210973171Y-122323599D01* +X210973172Y-122323598D01* +X211020061Y-122316172D01* +X211066949Y-122308747D01* +X211066949Y-122308746D01* +X211066954Y-122308746D01* +X211179992Y-122251150D01* +X211269700Y-122161442D01* +X211327296Y-122048404D01* +X211342150Y-121954619D01* +X211342149Y-120691582D01* +X211342149Y-120691581D01* +X211342149Y-120691578D01* +X211342148Y-120691576D01* +X211327297Y-120597800D01* +X211327296Y-120597798D01* +X211327296Y-120597796D01* +X211269700Y-120484758D01* +X211179992Y-120395050D01* +X211066954Y-120337454D01* +X211066955Y-120337454D01* +X210973172Y-120322600D01* +X210720416Y-120322600D01* +X210662225Y-120303693D01* +X210626261Y-120254193D01* +X210626261Y-120193007D01* +X210662225Y-120143507D01* +X210689824Y-120129445D01* +X210859863Y-120074196D01* +X211049202Y-119977724D01* +X211221114Y-119852822D01* +X211371372Y-119702564D01* +X211496274Y-119530652D01* +X211592745Y-119341315D01* +X211658408Y-119139222D01* +X211668881Y-119073100D01* +X210624662Y-119073100D01* +X210657575Y-119016093D01* +X210691650Y-118888926D01* +X210691650Y-118757274D01* +X210657575Y-118630107D01* +X210624662Y-118573100D01* +X211668881Y-118573100D01* +X211668881Y-118573099D01* +X211658408Y-118506977D01* +X211592745Y-118304884D01* +X211496274Y-118115547D01* +X211371372Y-117943635D01* +X211221114Y-117793377D01* +X211049202Y-117668475D01* +X210859865Y-117572004D01* +X210657771Y-117506340D01* +X210447900Y-117473100D01* +X210441651Y-117473100D01* +X210441650Y-117473101D01* +X210441650Y-118390088D01* +X210384643Y-118357175D01* +X210257476Y-118323100D01* +X210125824Y-118323100D01* +X209998657Y-118357175D01* +X209941650Y-118390088D01* +X209941650Y-117473101D01* +X209941649Y-117473100D01* +X209935400Y-117473100D01* +X209725528Y-117506340D01* +X209523434Y-117572004D01* +X209334097Y-117668475D01* +X209162185Y-117793377D01* +X209011927Y-117943635D01* +X208887025Y-118115547D01* +X208790554Y-118304884D01* +X208724891Y-118506977D01* +X208714418Y-118573099D01* +X166150500Y-118573099D01* +X166150500Y-116731891D01* +X184652150Y-116731891D01* +X184652150Y-116850509D01* +X184679224Y-116951551D01* +X184682852Y-116965090D01* +X184742157Y-117067808D01* +X184742159Y-117067810D01* +X184742161Y-117067813D01* +X184826037Y-117151689D01* +X184826039Y-117151690D01* +X184826041Y-117151692D01* +X184928760Y-117210997D01* +X184928761Y-117210997D01* +X184928764Y-117210999D01* +X185043341Y-117241700D01* +X185043343Y-117241700D01* +X185161957Y-117241700D01* +X185161959Y-117241700D01* +X185276536Y-117210999D01* +X185276538Y-117210997D01* +X185276540Y-117210997D01* +X185379258Y-117151692D01* +X185379258Y-117151691D01* +X185379263Y-117151689D01* +X185463139Y-117067813D01* +X185522449Y-116965086D01* +X185553150Y-116850509D01* +X185553150Y-116731891D01* +X185522449Y-116617314D01* +X185522447Y-116617311D01* +X185522447Y-116617309D01* +X185463142Y-116514591D01* +X185463140Y-116514589D01* +X185463139Y-116514587D01* +X185379263Y-116430711D01* +X185379260Y-116430709D01* +X185379258Y-116430707D01* +X185276539Y-116371402D01* +X185276540Y-116371402D01* +X185263001Y-116367774D01* +X185161959Y-116340700D01* +X185043341Y-116340700D01* +X184973217Y-116359489D01* +X184928759Y-116371402D01* +X184826041Y-116430707D01* +X184742157Y-116514591D01* +X184682852Y-116617309D01* +X184682851Y-116617314D01* +X184652150Y-116731891D01* +X166150500Y-116731891D01* +X166150500Y-115967591D01* +X186646350Y-115967591D01* +X186646350Y-116086209D01* +X186673424Y-116187251D01* +X186677052Y-116200790D01* +X186736357Y-116303508D01* +X186736359Y-116303510D01* +X186736361Y-116303513D01* +X186820237Y-116387389D01* +X186820239Y-116387390D01* +X186820241Y-116387392D01* +X186922960Y-116446697D01* +X186922961Y-116446697D01* +X186922964Y-116446699D01* +X187037541Y-116477400D01* +X187037543Y-116477400D01* +X187156157Y-116477400D01* +X187156159Y-116477400D01* +X187270736Y-116446699D01* +X187270738Y-116446697D01* +X187270740Y-116446697D01* +X187373458Y-116387392D01* +X187373458Y-116387391D01* +X187373463Y-116387389D01* +X187457339Y-116303513D01* +X187516649Y-116200786D01* +X187547350Y-116086209D01* +X187547350Y-115967591D01* +X187516649Y-115853014D01* +X187516647Y-115853011D01* +X187516647Y-115853009D01* +X187457342Y-115750291D01* +X187457340Y-115750289D01* +X187457339Y-115750287D01* +X187373463Y-115666411D01* +X187373460Y-115666409D01* +X187373458Y-115666407D01* +X187270739Y-115607102D01* +X187270740Y-115607102D01* +X187257201Y-115603474D01* +X187156159Y-115576400D01* +X187037541Y-115576400D01* +X186967417Y-115595189D01* +X186922959Y-115607102D01* +X186820241Y-115666407D01* +X186736357Y-115750291D01* +X186677052Y-115853009D01* +X186677051Y-115853014D01* +X186646350Y-115967591D01* +X166150500Y-115967591D01* +X166150500Y-114575791D01* +X184801250Y-114575791D01* +X184801250Y-114694409D01* +X184828324Y-114795451D01* +X184831952Y-114808990D01* +X184891257Y-114911708D01* +X184891259Y-114911710D01* +X184891261Y-114911713D01* +X184975137Y-114995589D01* +X184975139Y-114995590D01* +X184975141Y-114995592D01* +X185077860Y-115054897D01* +X185077861Y-115054897D01* +X185077864Y-115054899D01* +X185192441Y-115085600D01* +X185192443Y-115085600D01* +X185311057Y-115085600D01* +X185311059Y-115085600D01* +X185425636Y-115054899D01* +X185425638Y-115054897D01* +X185425640Y-115054897D01* +X185528358Y-114995592D01* +X185528358Y-114995591D01* +X185528363Y-114995589D01* +X185612239Y-114911713D01* +X185670150Y-114811409D01* +X185671547Y-114808990D01* +X185671547Y-114808988D01* +X185671549Y-114808986D01* +X185702250Y-114694409D01* +X185702250Y-114692791D01* +X192525650Y-114692791D01* +X192525650Y-114811409D01* +X192526073Y-114812987D01* +X192556352Y-114925990D01* +X192615657Y-115028708D01* +X192615659Y-115028710D01* +X192615661Y-115028713D01* +X192699537Y-115112589D01* +X192699539Y-115112590D01* +X192699541Y-115112592D01* +X192802260Y-115171897D01* +X192802261Y-115171897D01* +X192802264Y-115171899D01* +X192916841Y-115202600D01* +X192916843Y-115202600D01* +X193035457Y-115202600D01* +X193035459Y-115202600D01* +X193150036Y-115171899D01* +X193150038Y-115171897D01* +X193150040Y-115171897D01* +X193252758Y-115112592D01* +X193252758Y-115112591D01* +X193252763Y-115112589D01* +X193336639Y-115028713D01* +X193355762Y-114995592D01* +X193395947Y-114925990D01* +X193395947Y-114925988D01* +X193395949Y-114925986D01* +X193426650Y-114811409D01* +X193426650Y-114692791D01* +X193395949Y-114578214D01* +X193395947Y-114578211D01* +X193395947Y-114578209D01* +X193336642Y-114475491D01* +X193336640Y-114475489D01* +X193336639Y-114475487D01* +X193252763Y-114391611D01* +X193252760Y-114391609D01* +X193252758Y-114391607D01* +X193150039Y-114332302D01* +X193150040Y-114332302D01* +X193136501Y-114328674D01* +X193035459Y-114301600D01* +X192916841Y-114301600D01* +X192846717Y-114320389D01* +X192802259Y-114332302D01* +X192699541Y-114391607D01* +X192615657Y-114475491D01* +X192556352Y-114578209D01* +X192556351Y-114578214D01* +X192525650Y-114692791D01* +X185702250Y-114692791D01* +X185702250Y-114575791D01* +X185671549Y-114461214D01* +X185671547Y-114461211D01* +X185671547Y-114461209D01* +X185612242Y-114358491D01* +X185612240Y-114358489D01* +X185612239Y-114358487D01* +X185528363Y-114274611D01* +X185528360Y-114274609D01* +X185528358Y-114274607D01* +X185425639Y-114215302D01* +X185425640Y-114215302D01* +X185412101Y-114211674D01* +X185311059Y-114184600D01* +X185192441Y-114184600D01* +X185133102Y-114200500D01* +X185077859Y-114215302D01* +X184975141Y-114274607D01* +X184891257Y-114358491D01* +X184831952Y-114461209D01* +X184828125Y-114475491D01* +X184801250Y-114575791D01* +X166150500Y-114575791D01* +X166150500Y-114027891D01* +X169286750Y-114027891D01* +X169286750Y-114146509D01* +X169292990Y-114169797D01* +X169317452Y-114261090D01* +X169376757Y-114363808D01* +X169376759Y-114363810D01* +X169376761Y-114363813D01* +X169460637Y-114447689D01* +X169460639Y-114447690D01* +X169460641Y-114447692D01* +X169563360Y-114506997D01* +X169563361Y-114506997D01* +X169563364Y-114506999D01* +X169677941Y-114537700D01* +X169677943Y-114537700D01* +X169796557Y-114537700D01* +X169796559Y-114537700D01* +X169911136Y-114506999D01* +X170013863Y-114447689D01* +X170097739Y-114363813D01* +X170133658Y-114301600D01* +X170157047Y-114261090D01* +X170157047Y-114261088D01* +X170157049Y-114261086D01* +X170187750Y-114146509D01* +X170187750Y-114027891D01* +X170157049Y-113913314D01* +X170157047Y-113913311D01* +X170157047Y-113913309D01* +X170097742Y-113810591D01* +X170097740Y-113810589D01* +X170097739Y-113810587D01* +X170013863Y-113726711D01* +X170013860Y-113726709D01* +X170013858Y-113726707D01* +X169911139Y-113667402D01* +X169911140Y-113667402D01* +X169897601Y-113663774D01* +X169796559Y-113636700D01* +X169677941Y-113636700D01* +X169623879Y-113651186D01* +X169563359Y-113667402D01* +X169460641Y-113726707D01* +X169376757Y-113810591D01* +X169317452Y-113913309D01* +X169317451Y-113913314D01* +X169286750Y-114027891D01* +X166150500Y-114027891D01* +X166150500Y-113417991D01* +X171166350Y-113417991D01* +X171166350Y-113536609D01* +X171187140Y-113614198D01* +X171197052Y-113651190D01* +X171256357Y-113753908D01* +X171256359Y-113753910D01* +X171256361Y-113753913D01* +X171340237Y-113837789D01* +X171340239Y-113837790D01* +X171340241Y-113837792D01* +X171442960Y-113897097D01* +X171442961Y-113897097D01* +X171442964Y-113897099D01* +X171557541Y-113927800D01* +X171557543Y-113927800D01* +X171676157Y-113927800D01* +X171676159Y-113927800D01* +X171790736Y-113897099D01* +X171790738Y-113897097D01* +X171790740Y-113897097D01* +X171893458Y-113837792D01* +X171893458Y-113837791D01* +X171893463Y-113837789D01* +X171977339Y-113753913D01* +X172002986Y-113709492D01* +X172036647Y-113651190D01* +X172036647Y-113651188D01* +X172036649Y-113651186D01* +X172067350Y-113536609D01* +X172067350Y-113417991D01* +X172036649Y-113303414D01* +X172036647Y-113303411D01* +X172036647Y-113303409D01* +X171977342Y-113200691D01* +X171977340Y-113200689D01* +X171977339Y-113200687D01* +X171897277Y-113120625D01* +X201601150Y-113120625D01* +X201601150Y-113265575D01* +X201605628Y-113282286D01* +X201638667Y-113405589D01* +X201711137Y-113531110D01* +X201711139Y-113531112D01* +X201711141Y-113531115D01* +X201813635Y-113633609D01* +X201813637Y-113633610D01* +X201813639Y-113633612D01* +X201939161Y-113706082D01* +X201939162Y-113706082D01* +X201939165Y-113706084D01* +X202079175Y-113743600D01* +X202079176Y-113743600D01* +X202224124Y-113743600D01* +X202224125Y-113743600D01* +X202364135Y-113706084D01* +X202364137Y-113706082D01* +X202364139Y-113706082D01* +X202390797Y-113690691D01* +X209099500Y-113690691D01* +X209099500Y-113809309D01* +X209107132Y-113837792D01* +X209130202Y-113923890D01* +X209189507Y-114026608D01* +X209189509Y-114026610D01* +X209189511Y-114026613D01* +X209273387Y-114110489D01* +X209273389Y-114110490D01* +X209273391Y-114110492D01* +X209376110Y-114169797D01* +X209376111Y-114169797D01* +X209376114Y-114169799D01* +X209490691Y-114200500D01* +X209490693Y-114200500D01* +X209609307Y-114200500D01* +X209609309Y-114200500D01* +X209723886Y-114169799D01* +X209723888Y-114169797D01* +X209723890Y-114169797D01* +X209826608Y-114110492D01* +X209826608Y-114110491D01* +X209826613Y-114110489D01* +X209910489Y-114026613D01* +X209910492Y-114026608D01* +X209969797Y-113923890D01* +X209969797Y-113923888D01* +X209969799Y-113923886D01* +X210000500Y-113809309D01* +X210000500Y-113690691D01* +X209969799Y-113576114D01* +X209969797Y-113576111D01* +X209969797Y-113576109D01* +X209910492Y-113473391D01* +X209910490Y-113473389D01* +X209910489Y-113473387D01* +X209826613Y-113389511D01* +X209826610Y-113389509D01* +X209826608Y-113389507D01* +X209723889Y-113330202D01* +X209723890Y-113330202D01* +X209710351Y-113326574D01* +X209609309Y-113299500D01* +X209490691Y-113299500D01* +X209420567Y-113318289D01* +X209376109Y-113330202D01* +X209273391Y-113389507D01* +X209189507Y-113473391D01* +X209130202Y-113576109D01* +X209130201Y-113576114D01* +X209099500Y-113690691D01* +X202390797Y-113690691D01* +X202489660Y-113633612D01* +X202489660Y-113633611D01* +X202489665Y-113633609D01* +X202592159Y-113531115D01* +X202625486Y-113473391D01* +X202664632Y-113405589D01* +X202664632Y-113405587D01* +X202664634Y-113405585D01* +X202702150Y-113265575D01* +X202702150Y-113120625D01* +X202664634Y-112980615D01* +X202664632Y-112980612D01* +X202664632Y-112980610D01* +X202592162Y-112855089D01* +X202592160Y-112855087D01* +X202592159Y-112855085D01* +X202489665Y-112752591D01* +X202489662Y-112752589D01* +X202489660Y-112752587D01* +X202364138Y-112680117D01* +X202364139Y-112680117D01* +X202334546Y-112672187D01* +X202224125Y-112642600D01* +X202079175Y-112642600D01* +X202022075Y-112657900D01* +X201939160Y-112680117D01* +X201813639Y-112752587D01* +X201711137Y-112855089D01* +X201638667Y-112980610D01* +X201620318Y-113049091D01* +X201601150Y-113120625D01* +X171897277Y-113120625D01* +X171893463Y-113116811D01* +X171893460Y-113116809D01* +X171893458Y-113116807D01* +X171790739Y-113057502D01* +X171790740Y-113057502D01* +X171759353Y-113049092D01* +X171676159Y-113026800D01* +X171557541Y-113026800D01* +X171487417Y-113045589D01* +X171442959Y-113057502D01* +X171340241Y-113116807D01* +X171256357Y-113200691D01* +X171197052Y-113303409D01* +X171197051Y-113303414D01* +X171166350Y-113417991D01* +X166150500Y-113417991D01* +X166150500Y-110484991D01* +X196440450Y-110484991D01* +X196440450Y-110603609D01* +X196467524Y-110704651D01* +X196471152Y-110718190D01* +X196530457Y-110820908D01* +X196530459Y-110820910D01* +X196530461Y-110820913D01* +X196614337Y-110904789D01* +X196614339Y-110904790D01* +X196614341Y-110904792D01* +X196717060Y-110964097D01* +X196717061Y-110964097D01* +X196717064Y-110964099D01* +X196831641Y-110994800D01* +X196831643Y-110994800D01* +X196950257Y-110994800D01* +X196950259Y-110994800D01* +X197064836Y-110964099D01* +X197064838Y-110964097D01* +X197064840Y-110964097D01* +X197167558Y-110904792D01* +X197167558Y-110904791D01* +X197167563Y-110904789D01* +X197251439Y-110820913D01* +X197310749Y-110718186D01* +X197341450Y-110603609D01* +X197341450Y-110484991D01* +X197310749Y-110370414D01* +X197310747Y-110370411D01* +X197310747Y-110370409D01* +X197251442Y-110267691D01* +X197251440Y-110267689D01* +X197251439Y-110267687D01* +X197167563Y-110183811D01* +X197167560Y-110183809D01* +X197167558Y-110183807D01* +X197064839Y-110124502D01* +X197064840Y-110124502D01* +X197051301Y-110120874D01* +X196950259Y-110093800D01* +X196831641Y-110093800D01* +X196761517Y-110112589D01* +X196717059Y-110124502D01* +X196614341Y-110183807D01* +X196530457Y-110267691D01* +X196471152Y-110370409D01* +X196471151Y-110370414D01* +X196440450Y-110484991D01* +X166150500Y-110484991D01* +X166150500Y-109438991D01* +X181023850Y-109438991D01* +X181023850Y-109557609D01* +X181047054Y-109644207D01* +X181054552Y-109672190D01* +X181113857Y-109774908D01* +X181113859Y-109774910D01* +X181113861Y-109774913D01* +X181197737Y-109858789D01* +X181197739Y-109858790D01* +X181197741Y-109858792D01* +X181300460Y-109918097D01* +X181300461Y-109918097D01* +X181300464Y-109918099D01* +X181415041Y-109948800D01* +X181415043Y-109948800D01* +X181533657Y-109948800D01* +X181533659Y-109948800D01* +X181648236Y-109918099D01* +X181648238Y-109918097D01* +X181648240Y-109918097D01* +X181750958Y-109858792D01* +X181750958Y-109858791D01* +X181750963Y-109858789D01* +X181834839Y-109774913D01* +X181894149Y-109672186D01* +X181924850Y-109557609D01* +X181924850Y-109438991D01* +X181894149Y-109324414D01* +X181894147Y-109324411D01* +X181894147Y-109324409D01* +X181834842Y-109221691D01* +X181834840Y-109221689D01* +X181834839Y-109221687D01* +X181750963Y-109137811D01* +X181750960Y-109137809D01* +X181750958Y-109137807D01* +X181648239Y-109078502D01* +X181648240Y-109078502D01* +X181634701Y-109074874D01* +X181533659Y-109047800D01* +X181415041Y-109047800D01* +X181344917Y-109066589D01* +X181300459Y-109078502D01* +X181197741Y-109137807D01* +X181113857Y-109221691D01* +X181054552Y-109324409D01* +X181054551Y-109324414D01* +X181023850Y-109438991D01* +X166150500Y-109438991D01* +X166150500Y-107973691D01* +X173496450Y-107973691D01* +X173496450Y-108092309D01* +X173523524Y-108193351D01* +X173527152Y-108206890D01* +X173586457Y-108309608D01* +X173586459Y-108309610D01* +X173586461Y-108309613D01* +X173670337Y-108393489D01* +X173670339Y-108393490D01* +X173670341Y-108393492D01* +X173773060Y-108452797D01* +X173773061Y-108452797D01* +X173773064Y-108452799D01* +X173887641Y-108483500D01* +X173887643Y-108483500D01* +X174006257Y-108483500D01* +X174006259Y-108483500D01* +X174120836Y-108452799D01* +X174120838Y-108452797D01* +X174120840Y-108452797D01* +X174223558Y-108393492D01* +X174223558Y-108393491D01* +X174223563Y-108393489D01* +X174307439Y-108309613D01* +X174366749Y-108206886D01* +X174397450Y-108092309D01* +X174397450Y-107973691D01* +X174366749Y-107859114D01* +X174366747Y-107859111D01* +X174366747Y-107859109D01* +X174307442Y-107756391D01* +X174307440Y-107756389D01* +X174307439Y-107756387D01* +X174223563Y-107672511D01* +X174223560Y-107672509D01* +X174223558Y-107672507D01* +X174120839Y-107613202D01* +X174120840Y-107613202D01* +X174079787Y-107602202D01* +X174006259Y-107582500D01* +X173887641Y-107582500D01* +X173830560Y-107597795D01* +X173773059Y-107613202D01* +X173670341Y-107672507D01* +X173586457Y-107756391D01* +X173527152Y-107859109D01* +X173518176Y-107892608D01* +X173496450Y-107973691D01* +X166150500Y-107973691D01* +X166150500Y-107366791D01* +X176918650Y-107366791D01* +X176918650Y-107485409D01* +X176934245Y-107543609D01* +X176949352Y-107599990D01* +X177008657Y-107702708D01* +X177008659Y-107702710D01* +X177008661Y-107702713D01* +X177092537Y-107786589D01* +X177092539Y-107786590D01* +X177092541Y-107786592D01* +X177195260Y-107845897D01* +X177195261Y-107845897D01* +X177195264Y-107845899D01* +X177309841Y-107876600D01* +X177309843Y-107876600D01* +X177428457Y-107876600D01* +X177428459Y-107876600D01* +X177543036Y-107845899D01* +X177543038Y-107845897D01* +X177543040Y-107845897D01* +X177645758Y-107786592D01* +X177645758Y-107786591D01* +X177645763Y-107786589D01* +X177729639Y-107702713D01* +X177747079Y-107672507D01* +X177755344Y-107658191D01* +X186691150Y-107658191D01* +X186691150Y-107776809D01* +X186709662Y-107845897D01* +X186721852Y-107891390D01* +X186781157Y-107994108D01* +X186781159Y-107994110D01* +X186781161Y-107994113D01* +X186865037Y-108077989D01* +X186865039Y-108077990D01* +X186865041Y-108077992D01* +X186967760Y-108137297D01* +X186967761Y-108137297D01* +X186967764Y-108137299D01* +X187082341Y-108168000D01* +X187082343Y-108168000D01* +X187200957Y-108168000D01* +X187200959Y-108168000D01* +X187315536Y-108137299D01* +X187315538Y-108137297D01* +X187315540Y-108137297D01* +X187418258Y-108077992D01* +X187418258Y-108077991D01* +X187418263Y-108077989D01* +X187502139Y-107994113D01* +X187560741Y-107892613D01* +X187561447Y-107891390D01* +X187561447Y-107891388D01* +X187561449Y-107891386D01* +X187592150Y-107776809D01* +X187592150Y-107658191D01* +X187564953Y-107556691D01* +X188241150Y-107556691D01* +X188241150Y-107675309D01* +X188248492Y-107702708D01* +X188271852Y-107789890D01* +X188331157Y-107892608D01* +X188331159Y-107892610D01* +X188331161Y-107892613D01* +X188415037Y-107976489D01* +X188415039Y-107976490D01* +X188415041Y-107976492D01* +X188517760Y-108035797D01* +X188517761Y-108035797D01* +X188517764Y-108035799D01* +X188632341Y-108066500D01* +X188632343Y-108066500D01* +X188750957Y-108066500D01* +X188750959Y-108066500D01* +X188865536Y-108035799D01* +X188865538Y-108035797D01* +X188865540Y-108035797D01* +X188968258Y-107976492D01* +X188968258Y-107976491D01* +X188968263Y-107976489D01* +X189052139Y-107892613D01* +X189052845Y-107891390D01* +X189111447Y-107789890D01* +X189111447Y-107789888D01* +X189111449Y-107789886D01* +X189142150Y-107675309D01* +X189142150Y-107556691D01* +X189111449Y-107442114D01* +X189111447Y-107442111D01* +X189111447Y-107442109D01* +X189052142Y-107339391D01* +X189052140Y-107339389D01* +X189052139Y-107339387D01* +X188968263Y-107255511D01* +X188968260Y-107255509D01* +X188968258Y-107255507D01* +X188865539Y-107196202D01* +X188865540Y-107196202D01* +X188852001Y-107192574D01* +X188750959Y-107165500D01* +X188632341Y-107165500D01* +X188562217Y-107184289D01* +X188517759Y-107196202D01* +X188415041Y-107255507D01* +X188331157Y-107339391D01* +X188271852Y-107442109D01* +X188260250Y-107485409D01* +X188241150Y-107556691D01* +X187564953Y-107556691D01* +X187561449Y-107543614D01* +X187561446Y-107543609D01* +X187502142Y-107440891D01* +X187502140Y-107440889D01* +X187502139Y-107440887D01* +X187418263Y-107357011D01* +X187418260Y-107357009D01* +X187418258Y-107357007D01* +X187315539Y-107297702D01* +X187315540Y-107297702D01* +X187302001Y-107294074D01* +X187200959Y-107267000D01* +X187082341Y-107267000D01* +X187012217Y-107285789D01* +X186967759Y-107297702D01* +X186865041Y-107357007D01* +X186781157Y-107440891D01* +X186721852Y-107543609D01* +X186713220Y-107575824D01* +X186691150Y-107658191D01* +X177755344Y-107658191D01* +X177787670Y-107602202D01* +X177787670Y-107602201D01* +X177787672Y-107602198D01* +X177787819Y-107601942D01* +X177788949Y-107599986D01* +X177819650Y-107485409D01* +X177819650Y-107366791D01* +X177788949Y-107252214D01* +X177788947Y-107252211D01* +X177788947Y-107252209D01* +X177729642Y-107149491D01* +X177729640Y-107149489D01* +X177729639Y-107149487D01* +X177645763Y-107065611D01* +X177645760Y-107065609D01* +X177645758Y-107065607D01* +X177543039Y-107006302D01* +X177543040Y-107006302D01* +X177529501Y-107002674D01* +X177428459Y-106975600D01* +X177309841Y-106975600D01* +X177239717Y-106994389D01* +X177195259Y-107006302D01* +X177092541Y-107065607D01* +X177008657Y-107149491D01* +X176949352Y-107252209D01* +X176945389Y-107267000D01* +X176918650Y-107366791D01* +X166150500Y-107366791D01* +X166150500Y-105573099D01* +X208739418Y-105573099D01* +X208739419Y-105573100D01* +X209787504Y-105573100D01* +X209749020Y-105639757D01* +X209716650Y-105760565D01* +X209716650Y-105885635D01* +X209749020Y-106006443D01* +X209787504Y-106073100D01* +X208739419Y-106073100D01* +X208749891Y-106139222D01* +X208815554Y-106341315D01* +X208912025Y-106530652D01* +X209036927Y-106702564D01* +X209187185Y-106852822D01* +X209359097Y-106977724D01* +X209548436Y-107074196D01* +X209718478Y-107129445D01* +X209767978Y-107165409D01* +X209786886Y-107223599D01* +X209767979Y-107281790D01* +X209718479Y-107317754D01* +X209687886Y-107322600D01* +X209435128Y-107322600D01* +X209435126Y-107322601D01* +X209341350Y-107337452D01* +X209341345Y-107337454D01* +X209228309Y-107395049D01* +X209138599Y-107484759D01* +X209081004Y-107597795D01* +X209066150Y-107691578D01* +X209066150Y-108954621D01* +X209066151Y-108954623D01* +X209081002Y-109048399D01* +X209081004Y-109048404D01* +X209138600Y-109161442D01* +X209228308Y-109251150D01* +X209341346Y-109308746D01* +X209435131Y-109323600D01* +X210948168Y-109323599D01* +X210948171Y-109323599D01* +X210948172Y-109323598D01* +X210995061Y-109316172D01* +X211041949Y-109308747D01* +X211041949Y-109308746D01* +X211041954Y-109308746D01* +X211154992Y-109251150D01* +X211244700Y-109161442D01* +X211302296Y-109048404D01* +X211317150Y-108954619D01* +X211317149Y-107691582D01* +X211317149Y-107691581D01* +X211317149Y-107691578D01* +X211317148Y-107691576D01* +X211302297Y-107597800D01* +X211302296Y-107597798D01* +X211302296Y-107597796D01* +X211244700Y-107484758D01* +X211154992Y-107395050D01* +X211041954Y-107337454D01* +X211041955Y-107337454D01* +X210948172Y-107322600D01* +X210695415Y-107322600D01* +X210637224Y-107303693D01* +X210601260Y-107254193D01* +X210601260Y-107193007D01* +X210637224Y-107143507D01* +X210664823Y-107129445D01* +X210834863Y-107074196D01* +X211024202Y-106977724D01* +X211196114Y-106852822D01* +X211346372Y-106702564D01* +X211471274Y-106530652D01* +X211567745Y-106341315D01* +X211633408Y-106139222D01* +X211643881Y-106073100D01* +X210595796Y-106073100D01* +X210634280Y-106006443D01* +X210666650Y-105885635D01* +X210666650Y-105760565D01* +X210634280Y-105639757D01* +X210595796Y-105573100D01* +X211643881Y-105573100D01* +X211643881Y-105573099D01* +X211633408Y-105506977D01* +X211567745Y-105304884D01* +X211471274Y-105115547D01* +X211346372Y-104943635D01* +X211196114Y-104793377D01* +X211024202Y-104668475D01* +X210834865Y-104572004D01* +X210632772Y-104506341D01* +X210547742Y-104492873D01* +X210493226Y-104465095D01* +X210465449Y-104410578D01* +X210475021Y-104350146D01* +X210518286Y-104306882D01* +X210543913Y-104297995D01* +X210608485Y-104285151D01* +X210790564Y-104209732D01* +X210954432Y-104100239D01* +X211093789Y-103960882D01* +X211203282Y-103797014D01* +X211278701Y-103614935D01* +X211317150Y-103421641D01* +X211317150Y-103224559D01* +X211278701Y-103031265D01* +X211203282Y-102849186D01* +X211093789Y-102685318D01* +X210954432Y-102545961D01* +X210790564Y-102436468D01* +X210790565Y-102436468D01* +X210790563Y-102436467D01* +X210608485Y-102361049D01* +X210415193Y-102322600D01* +X210415191Y-102322600D01* +X209968109Y-102322600D01* +X209968106Y-102322600D01* +X209774815Y-102361049D01* +X209774813Y-102361049D01* +X209592736Y-102436467D01* +X209428868Y-102545961D01* +X209428864Y-102545964D01* +X209289514Y-102685314D01* +X209289511Y-102685318D01* +X209180017Y-102849186D01* +X209104599Y-103031263D01* +X209104599Y-103031265D01* +X209066150Y-103224556D01* +X209066150Y-103421643D01* +X209083727Y-103510007D01* +X209103418Y-103609000D01* +X209104599Y-103614934D01* +X209104599Y-103614936D01* +X209180017Y-103797013D01* +X209180018Y-103797014D01* +X209289511Y-103960882D01* +X209428868Y-104100239D01* +X209592736Y-104209732D01* +X209774815Y-104285151D01* +X209839384Y-104297994D01* +X209892767Y-104327891D01* +X209918383Y-104383456D01* +X209906446Y-104443465D01* +X209861517Y-104484998D01* +X209835557Y-104492873D01* +X209750527Y-104506341D01* +X209548434Y-104572004D01* +X209359097Y-104668475D01* +X209187185Y-104793377D01* +X209036927Y-104943635D01* +X208912025Y-105115547D01* +X208815554Y-105304884D01* +X208749891Y-105506977D01* +X208739418Y-105573099D01* +X166150500Y-105573099D01* +X166150500Y-103980091D01* +X175616250Y-103980091D01* +X175616250Y-104098709D01* +X175621636Y-104118809D01* +X175646952Y-104213290D01* +X175706257Y-104316008D01* +X175706259Y-104316010D01* +X175706261Y-104316013D01* +X175790137Y-104399889D01* +X175790139Y-104399890D01* +X175790141Y-104399892D01* +X175892860Y-104459197D01* +X175892861Y-104459197D01* +X175892864Y-104459199D01* +X176007441Y-104489900D01* +X176007443Y-104489900D01* +X176126057Y-104489900D01* +X176126059Y-104489900D01* +X176240636Y-104459199D01* +X176240638Y-104459197D01* +X176240640Y-104459197D01* +X176343358Y-104399892D01* +X176343358Y-104399891D01* +X176343363Y-104399889D01* +X176427239Y-104316013D01* +X176432511Y-104306882D01* +X176486547Y-104213290D01* +X176486547Y-104213288D01* +X176486549Y-104213286D01* +X176517250Y-104098709D01* +X176517250Y-103980091D01* +X176486549Y-103865514D01* +X176486547Y-103865511D01* +X176486547Y-103865509D01* +X176427242Y-103762791D01* +X176427240Y-103762789D01* +X176427239Y-103762787D01* +X176343363Y-103678911D01* +X176343360Y-103678909D01* +X176343358Y-103678907D01* +X176240639Y-103619602D01* +X176240640Y-103619602D01* +X176223219Y-103614934D01* +X176126059Y-103588900D01* +X176007441Y-103588900D01* +X175937317Y-103607689D01* +X175892859Y-103619602D01* +X175790141Y-103678907D01* +X175706257Y-103762791D01* +X175646952Y-103865509D01* +X175641565Y-103885614D01* +X175616250Y-103980091D01* +X166150500Y-103980091D01* +X166150500Y-102263791D01* +X188219250Y-102263791D01* +X188219250Y-102382409D01* +X188233735Y-102436467D01* +X188249952Y-102496990D01* +X188309257Y-102599708D01* +X188309259Y-102599710D01* +X188309261Y-102599713D01* +X188393137Y-102683589D01* +X188393139Y-102683590D01* +X188393141Y-102683592D01* +X188495860Y-102742897D01* +X188495861Y-102742897D01* +X188495864Y-102742899D01* +X188610441Y-102773600D01* +X188610443Y-102773600D01* +X188729057Y-102773600D01* +X188729059Y-102773600D01* +X188843636Y-102742899D01* +X188843638Y-102742897D01* +X188843640Y-102742897D01* +X188946358Y-102683592D01* +X188946358Y-102683591D01* +X188946363Y-102683589D01* +X189030239Y-102599713D01* +X189089549Y-102496986D01* +X189120250Y-102382409D01* +X189120250Y-102263791D01* +X189089549Y-102149214D01* +X189089547Y-102149211D01* +X189089547Y-102149209D01* +X189030242Y-102046491D01* +X189030240Y-102046489D01* +X189030239Y-102046487D01* +X188946363Y-101962611D01* +X188946360Y-101962609D01* +X188946358Y-101962607D01* +X188843639Y-101903302D01* +X188843640Y-101903302D01* +X188830101Y-101899674D01* +X188729059Y-101872600D01* +X188610441Y-101872600D01* +X188540317Y-101891389D01* +X188495859Y-101903302D01* +X188393141Y-101962607D01* +X188309257Y-102046491D01* +X188249952Y-102149209D01* +X188249951Y-102149214D01* +X188219250Y-102263791D01* +X166150500Y-102263791D01* +X166150500Y-98400091D01* +X175233450Y-98400091D01* +X175233450Y-98518709D01* +X175240064Y-98543391D01* +X175264152Y-98633290D01* +X175323457Y-98736008D01* +X175323459Y-98736010D01* +X175323461Y-98736013D01* +X175407337Y-98819889D01* +X175407339Y-98819890D01* +X175407341Y-98819892D01* +X175510060Y-98879197D01* +X175510061Y-98879197D01* +X175510064Y-98879199D01* +X175624641Y-98909900D01* +X175624643Y-98909900D01* +X175743257Y-98909900D01* +X175743259Y-98909900D01* +X175857836Y-98879199D01* +X175857838Y-98879197D01* +X175857840Y-98879197D01* +X175960558Y-98819892D01* +X175960558Y-98819891D01* +X175960563Y-98819889D01* +X176044439Y-98736013D01* +X176103749Y-98633286D01* +X176134450Y-98518709D01* +X176134450Y-98400091D01* +X176103749Y-98285514D01* +X176103747Y-98285511D01* +X176103747Y-98285509D01* +X176044442Y-98182791D01* +X176044440Y-98182789D01* +X176044439Y-98182787D01* +X175960563Y-98098911D01* +X175960560Y-98098909D01* +X175960558Y-98098907D01* +X175857839Y-98039602D01* +X175857840Y-98039602D01* +X175844301Y-98035974D01* +X175743259Y-98008900D01* +X175624641Y-98008900D01* +X175554517Y-98027689D01* +X175510059Y-98039602D01* +X175407341Y-98098907D01* +X175323457Y-98182791D01* +X175264152Y-98285509D01* +X175246987Y-98349569D01* +X175233450Y-98400091D01* +X166150500Y-98400091D01* +X166150500Y-97631591D01* +X171309650Y-97631591D01* +X171309650Y-97750209D01* +X171330143Y-97826689D01* +X171340352Y-97864790D01* +X171399657Y-97967508D01* +X171399659Y-97967510D01* +X171399661Y-97967513D01* +X171483537Y-98051389D01* +X171483539Y-98051390D01* +X171483541Y-98051392D01* +X171586260Y-98110697D01* +X171586261Y-98110697D01* +X171586264Y-98110699D01* +X171700841Y-98141400D01* +X171700843Y-98141400D01* +X171819457Y-98141400D01* +X171819459Y-98141400D01* +X171934036Y-98110699D01* +X171934038Y-98110697D01* +X171934040Y-98110697D01* +X172036758Y-98051392D01* +X172036758Y-98051391D01* +X172036763Y-98051389D01* +X172120639Y-97967513D01* +X172128388Y-97954091D01* +X172179947Y-97864790D01* +X172179947Y-97864788D01* +X172179949Y-97864786D01* +X172210650Y-97750209D01* +X172210650Y-97631591D01* +X172179949Y-97517014D01* +X172179947Y-97517011D01* +X172179947Y-97517009D01* +X172120642Y-97414291D01* +X172120640Y-97414289D01* +X172120639Y-97414287D01* +X172036763Y-97330411D01* +X172036760Y-97330409D01* +X172036758Y-97330407D01* +X171934039Y-97271102D01* +X171934040Y-97271102D01* +X171920501Y-97267474D01* +X171819459Y-97240400D01* +X171700841Y-97240400D01* +X171630717Y-97259189D01* +X171586259Y-97271102D01* +X171483541Y-97330407D01* +X171399657Y-97414291D01* +X171340352Y-97517009D01* +X171328595Y-97560889D01* +X171309650Y-97631591D01* +X166150500Y-97631591D01* +X166150500Y-92730622D01* +X173016650Y-92730622D01* +X173016650Y-92915577D01* +X173045582Y-93098243D01* +X173102734Y-93274141D01* +X173186696Y-93438927D01* +X173186701Y-93438935D01* +X173201664Y-93459529D01* +X173791650Y-92869543D01* +X173791650Y-92875761D01* +X173818909Y-92977494D01* +X173871570Y-93068706D01* +X173946044Y-93143180D01* +X174037256Y-93195841D01* +X174138989Y-93223100D01* +X174145202Y-93223100D01* +X173555218Y-93813084D01* +X173575814Y-93828048D01* +X173575822Y-93828053D01* +X173740608Y-93912015D01* +X173916506Y-93969167D01* +X174099173Y-93998100D01* +X174284127Y-93998100D01* +X174466793Y-93969167D01* +X174642691Y-93912015D01* +X174807487Y-93828047D01* +X174828080Y-93813084D01* +X174238096Y-93223100D01* +X174244311Y-93223100D01* +X174346044Y-93195841D01* +X174437256Y-93143180D01* +X174511730Y-93068706D01* +X174564391Y-92977494D01* +X174591650Y-92875761D01* +X174591650Y-92869546D01* +X175181634Y-93459530D01* +X175196597Y-93438937D01* +X175280565Y-93274141D01* +X175337717Y-93098243D01* +X175366650Y-92915577D01* +X175366650Y-92730622D01* +X195366650Y-92730622D01* +X195366650Y-92915577D01* +X195395582Y-93098243D01* +X195452734Y-93274141D01* +X195536696Y-93438927D01* +X195536701Y-93438935D01* +X195551664Y-93459529D01* +X196141650Y-92869543D01* +X196141650Y-92875761D01* +X196168909Y-92977494D01* +X196221570Y-93068706D01* +X196296044Y-93143180D01* +X196387256Y-93195841D01* +X196488989Y-93223100D01* +X196495202Y-93223100D01* +X195905218Y-93813084D01* +X195925814Y-93828048D01* +X195925822Y-93828053D01* +X196090608Y-93912015D01* +X196266506Y-93969167D01* +X196449173Y-93998100D01* +X196634127Y-93998100D01* +X196816793Y-93969167D01* +X196992691Y-93912015D01* +X197157487Y-93828047D01* +X197178080Y-93813084D01* +X196588096Y-93223100D01* +X196594311Y-93223100D01* +X196696044Y-93195841D01* +X196787256Y-93143180D01* +X196861730Y-93068706D01* +X196914391Y-92977494D01* +X196941650Y-92875761D01* +X196941650Y-92869546D01* +X197531634Y-93459530D01* +X197546597Y-93438937D01* +X197630565Y-93274141D01* +X197687717Y-93098243D01* +X197698840Y-93028022D01* +X197716650Y-92915576D01* +X197716650Y-92730623D01* +X197698840Y-92618178D01* +X197691700Y-92573099D01* +X208739418Y-92573099D01* +X208739419Y-92573100D01* +X209787504Y-92573100D01* +X209749020Y-92639757D01* +X209716650Y-92760565D01* +X209716650Y-92885635D01* +X209749020Y-93006443D01* +X209787504Y-93073100D01* +X208739419Y-93073100D01* +X208749891Y-93139222D01* +X208815554Y-93341315D01* +X208912025Y-93530652D01* +X209036927Y-93702564D01* +X209187185Y-93852822D01* +X209359097Y-93977724D01* +X209548436Y-94074196D01* +X209718478Y-94129445D01* +X209767978Y-94165409D01* +X209786886Y-94223599D01* +X209767979Y-94281790D01* +X209718479Y-94317754D01* +X209687886Y-94322600D01* +X209435128Y-94322600D01* +X209435126Y-94322601D01* +X209341350Y-94337452D01* +X209341345Y-94337454D01* +X209228309Y-94395049D01* +X209138599Y-94484759D01* +X209081004Y-94597795D01* +X209066150Y-94691578D01* +X209066150Y-95954621D01* +X209066151Y-95954623D01* +X209081002Y-96048399D01* +X209081004Y-96048404D01* +X209138600Y-96161442D01* +X209228308Y-96251150D01* +X209341346Y-96308746D01* +X209435131Y-96323600D01* +X210948168Y-96323599D01* +X210948171Y-96323599D01* +X210948172Y-96323598D01* +X210995061Y-96316172D01* +X211041949Y-96308747D01* +X211041949Y-96308746D01* +X211041954Y-96308746D01* +X211154992Y-96251150D01* +X211244700Y-96161442D01* +X211302296Y-96048404D01* +X211317150Y-95954619D01* +X211317149Y-94691582D01* +X211317149Y-94691581D01* +X211317149Y-94691578D01* +X211317148Y-94691576D01* +X211302297Y-94597800D01* +X211302296Y-94597798D01* +X211302296Y-94597796D01* +X211244700Y-94484758D01* +X211154992Y-94395050D01* +X211041954Y-94337454D01* +X211041955Y-94337454D01* +X210948172Y-94322600D01* +X210695415Y-94322600D01* +X210637224Y-94303693D01* +X210601260Y-94254193D01* +X210601260Y-94193007D01* +X210637224Y-94143507D01* +X210664823Y-94129445D01* +X210834863Y-94074196D01* +X211024202Y-93977724D01* +X211196114Y-93852822D01* +X211346372Y-93702564D01* +X211471274Y-93530652D01* +X211567745Y-93341315D01* +X211633408Y-93139222D01* +X211643881Y-93073100D01* +X210595796Y-93073100D01* +X210634280Y-93006443D01* +X210666650Y-92885635D01* +X210666650Y-92760565D01* +X210634280Y-92639757D01* +X210595796Y-92573100D01* +X211643881Y-92573100D01* +X211643881Y-92573099D01* +X211633408Y-92506977D01* +X211567745Y-92304884D01* +X211471274Y-92115547D01* +X211346372Y-91943635D01* +X211196114Y-91793377D01* +X211024202Y-91668475D01* +X210834865Y-91572004D01* +X210632772Y-91506341D01* +X210547742Y-91492873D01* +X210493226Y-91465095D01* +X210465449Y-91410578D01* +X210475021Y-91350146D01* +X210518286Y-91306882D01* +X210543913Y-91297995D01* +X210608485Y-91285151D01* +X210790564Y-91209732D01* +X210954432Y-91100239D01* +X211093789Y-90960882D01* +X211203282Y-90797014D01* +X211278701Y-90614935D01* +X211317150Y-90421641D01* +X211317150Y-90224559D01* +X211278701Y-90031265D01* +X211203282Y-89849186D01* +X211093789Y-89685318D01* +X210954432Y-89545961D01* +X210832230Y-89464308D01* +X210790563Y-89436467D01* +X210608485Y-89361049D01* +X210415193Y-89322600D01* +X210415191Y-89322600D01* +X209968109Y-89322600D01* +X209968106Y-89322600D01* +X209774815Y-89361049D01* +X209774813Y-89361049D01* +X209592736Y-89436467D01* +X209428868Y-89545961D01* +X209428864Y-89545964D01* +X209289514Y-89685314D01* +X209289511Y-89685318D01* +X209180017Y-89849186D01* +X209104599Y-90031263D01* +X209104599Y-90031265D01* +X209066150Y-90224556D01* +X209066150Y-90421643D01* +X209104599Y-90614934D01* +X209104599Y-90614936D01* +X209180017Y-90797013D01* +X209180018Y-90797014D01* +X209289511Y-90960882D01* +X209428868Y-91100239D01* +X209592736Y-91209732D01* +X209774815Y-91285151D01* +X209839384Y-91297994D01* +X209892767Y-91327891D01* +X209918383Y-91383456D01* +X209906446Y-91443465D01* +X209861517Y-91484998D01* +X209835557Y-91492873D01* +X209750527Y-91506341D01* +X209548434Y-91572004D01* +X209359097Y-91668475D01* +X209187185Y-91793377D01* +X209036927Y-91943635D01* +X208912025Y-92115547D01* +X208815554Y-92304884D01* +X208749891Y-92506977D01* +X208739418Y-92573099D01* +X197691700Y-92573099D01* +X197687717Y-92547956D01* +X197630565Y-92372058D01* +X197546603Y-92207272D01* +X197546598Y-92207264D01* +X197531634Y-92186668D01* +X196941650Y-92776652D01* +X196941650Y-92770439D01* +X196914391Y-92668706D01* +X196861730Y-92577494D01* +X196787256Y-92503020D01* +X196696044Y-92450359D01* +X196594311Y-92423100D01* +X196588094Y-92423100D01* +X197178080Y-91833114D01* +X197157485Y-91818151D01* +X197157477Y-91818146D01* +X196992693Y-91734185D01* +X196965643Y-91725396D01* +X196916143Y-91689432D01* +X196897236Y-91631241D01* +X196916143Y-91573050D01* +X196941232Y-91548927D01* +X197067875Y-91464308D01* +X197182858Y-91349325D01* +X197273198Y-91214121D01* +X197335426Y-91063889D01* +X197367150Y-90904405D01* +X197367150Y-90741795D01* +X197335426Y-90582311D01* +X197273198Y-90432079D01* +X197182858Y-90296875D01* +X197067875Y-90181892D01* +X196932671Y-90091552D01* +X196932670Y-90091551D01* +X196932668Y-90091550D01* +X196782440Y-90029324D01* +X196622955Y-89997600D01* +X196460345Y-89997600D01* +X196460344Y-89997600D01* +X196300859Y-90029324D01* +X196150631Y-90091550D01* +X196015428Y-90181889D01* +X195900439Y-90296878D01* +X195810100Y-90432081D01* +X195747874Y-90582309D01* +X195716150Y-90741794D01* +X195716150Y-90904405D01* +X195747874Y-91063890D01* +X195810100Y-91214118D01* +X195877100Y-91314392D01* +X195900442Y-91349325D01* +X196015425Y-91464308D01* +X196015428Y-91464310D01* +X196142064Y-91548925D01* +X196179944Y-91596975D01* +X196182346Y-91658113D01* +X196148354Y-91708987D01* +X196117657Y-91725395D01* +X196090610Y-91734183D01* +X195925818Y-91818148D01* +X195905218Y-91833114D01* +X196495204Y-92423100D01* +X196488989Y-92423100D01* +X196387256Y-92450359D01* +X196296044Y-92503020D01* +X196221570Y-92577494D01* +X196168909Y-92668706D01* +X196141650Y-92770439D01* +X196141650Y-92776654D01* +X195551664Y-92186668D01* +X195536698Y-92207268D01* +X195452734Y-92372058D01* +X195395582Y-92547956D01* +X195366650Y-92730622D01* +X175366650Y-92730622D01* +X175337717Y-92547956D01* +X175280565Y-92372058D01* +X175196603Y-92207272D01* +X175196598Y-92207264D01* +X175181634Y-92186668D01* +X174591650Y-92776652D01* +X174591650Y-92770439D01* +X174564391Y-92668706D01* +X174511730Y-92577494D01* +X174437256Y-92503020D01* +X174346044Y-92450359D01* +X174244311Y-92423100D01* +X174238094Y-92423100D01* +X174828080Y-91833114D01* +X174807485Y-91818151D01* +X174807477Y-91818146D01* +X174642693Y-91734185D01* +X174615643Y-91725396D01* +X174566143Y-91689432D01* +X174547236Y-91631241D01* +X174566143Y-91573050D01* +X174591232Y-91548927D01* +X174717875Y-91464308D01* +X174832858Y-91349325D01* +X174923198Y-91214121D01* +X174985426Y-91063889D01* +X175017150Y-90904405D01* +X175017150Y-90741795D01* +X174985426Y-90582311D01* +X174923198Y-90432079D01* +X174832858Y-90296875D01* +X174717875Y-90181892D01* +X174582671Y-90091552D01* +X174582670Y-90091551D01* +X174582668Y-90091550D01* +X174432440Y-90029324D01* +X174272955Y-89997600D01* +X174110345Y-89997600D01* +X174110344Y-89997600D01* +X173950859Y-90029324D01* +X173800631Y-90091550D01* +X173665428Y-90181889D01* +X173550439Y-90296878D01* +X173460100Y-90432081D01* +X173397874Y-90582309D01* +X173366150Y-90741794D01* +X173366150Y-90904405D01* +X173397874Y-91063890D01* +X173460100Y-91214118D01* +X173527100Y-91314392D01* +X173550442Y-91349325D01* +X173665425Y-91464308D01* +X173665428Y-91464310D01* +X173792064Y-91548925D01* +X173829944Y-91596975D01* +X173832346Y-91658113D01* +X173798354Y-91708987D01* +X173767657Y-91725395D01* +X173740610Y-91734183D01* +X173575818Y-91818148D01* +X173555218Y-91833114D01* +X174145204Y-92423100D01* +X174138989Y-92423100D01* +X174037256Y-92450359D01* +X173946044Y-92503020D01* +X173871570Y-92577494D01* +X173818909Y-92668706D01* +X173791650Y-92770439D01* +X173791650Y-92776654D01* +X173201664Y-92186668D01* +X173186698Y-92207268D01* +X173102734Y-92372058D01* +X173045582Y-92547956D01* +X173016650Y-92730622D01* +X166150500Y-92730622D01* +X166150500Y-86794768D01* +X166169407Y-86736577D01* +X166179490Y-86724770D01* +X167724764Y-85179495D01* +X167779281Y-85151719D01* +X167794768Y-85150500D01* +X167909307Y-85150500D01* +X167909309Y-85150500D01* +X168023886Y-85119799D01* +X168023888Y-85119797D01* +X168023890Y-85119797D01* +X168126608Y-85060492D01* +X168126608Y-85060491D01* +X168126613Y-85060489D01* +X168210489Y-84976613D01* +X168210492Y-84976608D01* +X168269797Y-84873890D01* +X168269797Y-84873888D01* +X168269799Y-84873886D01* +X168300500Y-84759309D01* +X168300500Y-84640691D01* +X168269799Y-84526114D01* +X168269797Y-84526111D01* +X168269797Y-84526109D01* +X168210492Y-84423391D01* +X168210490Y-84423389D01* +X168210489Y-84423387D01* +X168126613Y-84339511D01* +X168126610Y-84339509D01* +X168126608Y-84339507D01* +X168023889Y-84280202D01* +X168023890Y-84280202D01* +X167981680Y-84268892D01* +X167909309Y-84249500D01* +X167790691Y-84249500D01* +X167720567Y-84268289D01* +X167676109Y-84280202D01* +X167573391Y-84339507D01* +X167489507Y-84423391D01* +X167430202Y-84526109D01* +X167399500Y-84640692D01* +X167399500Y-84755230D01* +X167380593Y-84813421D01* +X167370504Y-84825234D01* +X165919504Y-86276234D01* +X165864987Y-86304011D01* +X165804555Y-86294440D01* +X165761290Y-86251175D01* +X165750500Y-86206230D01* +X165750500Y-84410455D01* +X165769407Y-84352264D01* +X165779496Y-84340451D01* +X166166883Y-83953064D01* +X166221400Y-83925287D01* +X166236887Y-83924068D01* +X170331663Y-83924068D01* +X170389854Y-83942975D01* +X170401667Y-83953064D01* +X172120504Y-85671900D01* +X172148281Y-85726417D01* +X172149500Y-85741904D01* +X172149500Y-88899828D01* +X172187634Y-88991894D01* +X172187635Y-88991895D01* +X172187636Y-88991897D01* +X172258103Y-89062364D01* +X172258104Y-89062364D01* +X172258105Y-89062365D01* +X172350171Y-89100500D01* +X172350172Y-89100500D01* +X172449828Y-89100500D01* +X173346889Y-89100500D01* +X173405080Y-89119407D01* +X173438353Y-89161615D01* +X173460100Y-89214118D01* +X173547041Y-89344236D01* +X173550442Y-89349325D01* +X173665425Y-89464308D01* +X173800629Y-89554648D01* +X173800630Y-89554648D01* +X173800631Y-89554649D01* +X173875745Y-89585762D01* +X173950861Y-89616876D01* +X174110345Y-89648600D01* +X174110346Y-89648600D01* +X174272954Y-89648600D01* +X174272955Y-89648600D01* +X174432439Y-89616876D01* +X174582671Y-89554648D01* +X174717875Y-89464308D01* +X174832858Y-89349325D01* +X174923198Y-89214121D01* +X174985426Y-89063889D01* +X174999986Y-88990691D01* +X190449500Y-88990691D01* +X190449500Y-89109309D01* +X190476574Y-89210351D01* +X190480202Y-89223890D01* +X190539507Y-89326608D01* +X190539509Y-89326610D01* +X190539511Y-89326613D01* +X190623387Y-89410489D01* +X190623389Y-89410490D01* +X190623391Y-89410492D01* +X190726110Y-89469797D01* +X190726111Y-89469797D01* +X190726114Y-89469799D01* +X190840691Y-89500500D01* +X190840693Y-89500500D01* +X190959307Y-89500500D01* +X190959309Y-89500500D01* +X191073886Y-89469799D01* +X191073888Y-89469797D01* +X191073890Y-89469797D01* +X191176608Y-89410492D01* +X191176608Y-89410491D01* +X191176613Y-89410489D01* +X191260489Y-89326613D01* +X191278410Y-89295574D01* +X191319797Y-89223890D01* +X191319797Y-89223888D01* +X191319799Y-89223886D01* +X191350500Y-89109309D01* +X191350500Y-88990691D01* +X191319799Y-88876114D01* +X191319797Y-88876111D01* +X191319797Y-88876109D01* +X191268022Y-88786433D01* +X191268021Y-88786432D01* +X191260490Y-88773389D01* +X191260489Y-88773387D01* +X191228896Y-88741794D01* +X195716150Y-88741794D01* +X195716150Y-88904405D01* +X195747874Y-89063890D01* +X195810100Y-89214118D01* +X195897041Y-89344236D01* +X195900442Y-89349325D01* +X196015425Y-89464308D01* +X196150629Y-89554648D01* +X196150630Y-89554648D01* +X196150631Y-89554649D01* +X196225745Y-89585762D01* +X196300861Y-89616876D01* +X196460345Y-89648600D01* +X196460346Y-89648600D01* +X196622954Y-89648600D01* +X196622955Y-89648600D01* +X196782439Y-89616876D01* +X196932671Y-89554648D01* +X197067875Y-89464308D01* +X197182858Y-89349325D01* +X197273198Y-89214121D01* +X197335426Y-89063889D01* +X197367150Y-88904405D01* +X197367150Y-88741795D01* +X197366930Y-88740691D01* +X198399500Y-88740691D01* +X198399500Y-88859309D01* +X198404002Y-88876109D01* +X198430202Y-88973890D01* +X198489507Y-89076608D01* +X198489509Y-89076610D01* +X198489511Y-89076613D01* +X198573387Y-89160489D01* +X198573389Y-89160490D01* +X198573391Y-89160492D01* +X198676110Y-89219797D01* +X198676111Y-89219797D01* +X198676114Y-89219799D01* +X198790691Y-89250500D01* +X198790693Y-89250500D01* +X198909307Y-89250500D01* +X198909309Y-89250500D01* +X199023886Y-89219799D01* +X199023888Y-89219797D01* +X199023890Y-89219797D01* +X199126608Y-89160492D01* +X199126608Y-89160491D01* +X199126613Y-89160489D01* +X199210489Y-89076613D01* +X199225388Y-89050807D01* +X199269797Y-88973890D01* +X199269797Y-88973888D01* +X199269799Y-88973886D01* +X199300500Y-88859309D01* +X199300500Y-88744768D01* +X199319407Y-88686577D01* +X199329496Y-88674764D01* +X199707385Y-88296875D01* +X200262364Y-87741897D01* +X200300500Y-87649828D01* +X200300500Y-87550173D01* +X200300500Y-85990691D01* +X203449500Y-85990691D01* +X203449500Y-86109309D01* +X203468948Y-86181888D01* +X203480202Y-86223890D01* +X203539507Y-86326608D01* +X203539509Y-86326610D01* +X203539511Y-86326613D01* +X203620505Y-86407607D01* +X203648281Y-86462122D01* +X203649500Y-86477609D01* +X203649500Y-89172390D01* +X203630593Y-89230581D01* +X203620504Y-89242393D01* +X203539511Y-89323386D01* +X203539507Y-89323391D01* +X203480202Y-89426109D01* +X203463037Y-89490169D01* +X203449500Y-89540691D01* +X203449500Y-89659309D01* +X203470072Y-89736084D01* +X203480202Y-89773890D01* +X203539507Y-89876608D01* +X203539509Y-89876610D01* +X203539511Y-89876613D01* +X203623387Y-89960489D01* +X203623389Y-89960490D01* +X203623391Y-89960492D01* +X203726110Y-90019797D01* +X203726111Y-90019797D01* +X203726114Y-90019799D01* +X203840691Y-90050500D01* +X203840693Y-90050500D01* +X203959307Y-90050500D01* +X203959309Y-90050500D01* +X204073886Y-90019799D01* +X204073888Y-90019797D01* +X204073890Y-90019797D01* +X204176608Y-89960492D01* +X204176608Y-89960491D01* +X204176613Y-89960489D01* +X204260489Y-89876613D01* +X204319799Y-89773886D01* +X204350500Y-89659309D01* +X204350500Y-89540691D01* +X204319799Y-89426114D01* +X204319797Y-89426111D01* +X204319797Y-89426109D01* +X204260492Y-89323391D01* +X204260488Y-89323386D01* +X204179496Y-89242393D01* +X204151719Y-89187876D01* +X204150500Y-89172390D01* +X204150500Y-87724556D01* +X209066150Y-87724556D01* +X209066150Y-87724559D01* +X209066150Y-87921641D01* +X209099947Y-88091550D01* +X209104599Y-88114934D01* +X209104599Y-88114936D01* +X209180017Y-88297013D01* +X209214273Y-88348281D01* +X209289511Y-88460882D01* +X209428868Y-88600239D01* +X209592736Y-88709732D01* +X209774815Y-88785151D01* +X209968109Y-88823600D01* +X209968110Y-88823600D01* +X210415190Y-88823600D01* +X210415191Y-88823600D01* +X210608485Y-88785151D01* +X210790564Y-88709732D01* +X210954432Y-88600239D01* +X211093789Y-88460882D01* +X211203282Y-88297014D01* +X211278701Y-88114935D01* +X211317150Y-87921641D01* +X211317150Y-87724559D01* +X211278701Y-87531265D01* +X211203282Y-87349186D01* +X211093789Y-87185318D01* +X210954432Y-87045961D01* +X210790564Y-86936468D01* +X210790565Y-86936468D01* +X210790563Y-86936467D01* +X210608485Y-86861049D01* +X210415193Y-86822600D01* +X210415191Y-86822600D01* +X209968109Y-86822600D01* +X209968106Y-86822600D01* +X209774815Y-86861049D01* +X209774813Y-86861049D01* +X209592736Y-86936467D01* +X209428868Y-87045961D01* +X209428864Y-87045964D01* +X209289514Y-87185314D01* +X209289511Y-87185318D01* +X209180017Y-87349186D01* +X209104599Y-87531263D01* +X209104599Y-87531265D01* +X209066150Y-87724556D01* +X204150500Y-87724556D01* +X204150500Y-86477609D01* +X204169407Y-86419418D01* +X204179490Y-86407611D01* +X204260489Y-86326613D01* +X204260492Y-86326608D01* +X204319797Y-86223890D01* +X204319797Y-86223888D01* +X204319799Y-86223886D01* +X204350500Y-86109309D01* +X204350500Y-85990691D01* +X204319799Y-85876114D01* +X204319797Y-85876111D01* +X204319797Y-85876109D01* +X204260492Y-85773391D01* +X204260490Y-85773389D01* +X204260489Y-85773387D01* +X204176613Y-85689511D01* +X204176610Y-85689509D01* +X204176608Y-85689507D01* +X204073889Y-85630202D01* +X204073890Y-85630202D01* +X204060351Y-85626574D01* +X203959309Y-85599500D01* +X203840691Y-85599500D01* +X203775847Y-85616875D01* +X203726109Y-85630202D01* +X203623391Y-85689507D01* +X203539507Y-85773391D01* +X203480202Y-85876109D01* +X203463830Y-85937212D01* +X203449500Y-85990691D01* +X200300500Y-85990691D01* +X200300500Y-84877609D01* +X200319407Y-84819418D01* +X200329490Y-84807611D01* +X200410489Y-84726613D01* +X200459168Y-84642299D01* +X200469797Y-84623890D01* +X200469797Y-84623888D01* +X200469799Y-84623886D01* +X200500500Y-84509309D01* +X200500500Y-84390691D01* +X200469799Y-84276114D01* +X200469797Y-84276111D01* +X200469797Y-84276109D01* +X200410492Y-84173391D01* +X200410490Y-84173389D01* +X200410489Y-84173387D01* +X200326613Y-84089511D01* +X200326610Y-84089509D01* +X200326608Y-84089507D01* +X200223889Y-84030202D01* +X200223890Y-84030202D01* +X200210351Y-84026574D01* +X200109309Y-83999500D01* +X199990691Y-83999500D01* +X199920567Y-84018289D01* +X199876109Y-84030202D01* +X199773391Y-84089507D01* +X199689507Y-84173391D01* +X199630202Y-84276109D01* +X199628675Y-84281809D01* +X199599500Y-84390691D01* +X199599500Y-84509309D01* +X199625089Y-84604808D01* +X199630202Y-84623890D01* +X199689507Y-84726608D01* +X199689509Y-84726610D01* +X199689511Y-84726613D01* +X199770505Y-84807607D01* +X199798281Y-84862122D01* +X199799500Y-84877609D01* +X199799500Y-87455230D01* +X199780593Y-87513421D01* +X199770504Y-87525234D01* +X198975234Y-88320504D01* +X198920717Y-88348281D01* +X198905230Y-88349500D01* +X198790691Y-88349500D01* +X198720567Y-88368289D01* +X198676109Y-88380202D01* +X198573391Y-88439507D01* +X198489507Y-88523391D01* +X198430202Y-88626109D01* +X198428890Y-88631007D01* +X198399500Y-88740691D01* +X197366930Y-88740691D01* +X197335426Y-88582311D01* +X197285128Y-88460881D01* +X197273199Y-88432081D01* +X197182860Y-88296878D01* +X197182858Y-88296875D01* +X197067875Y-88181892D01* +X196932671Y-88091552D01* +X196932670Y-88091551D01* +X196932668Y-88091550D01* +X196782440Y-88029324D01* +X196622955Y-87997600D01* +X196460345Y-87997600D01* +X196460344Y-87997600D01* +X196300859Y-88029324D01* +X196150631Y-88091550D01* +X196015428Y-88181889D01* +X195900439Y-88296878D01* +X195810100Y-88432081D01* +X195747874Y-88582309D01* +X195716150Y-88741794D01* +X191228896Y-88741794D01* +X191176613Y-88689511D01* +X191176610Y-88689509D01* +X191176608Y-88689507D01* +X191073889Y-88630202D01* +X191073890Y-88630202D01* +X191058615Y-88626109D01* +X190959309Y-88599500D01* +X190840691Y-88599500D01* +X190770567Y-88618289D01* +X190726109Y-88630202D01* +X190623391Y-88689507D01* +X190539507Y-88773391D01* +X190480202Y-88876109D01* +X190480201Y-88876114D01* +X190449500Y-88990691D01* +X174999986Y-88990691D01* +X175017150Y-88904405D01* +X175017150Y-88741795D01* +X174985426Y-88582311D01* +X174935128Y-88460881D01* +X174923199Y-88432081D01* +X174832860Y-88296878D01* +X174832858Y-88296875D01* +X174717875Y-88181892D01* +X174582671Y-88091552D01* +X174582670Y-88091551D01* +X174582668Y-88091550D01* +X174432440Y-88029324D01* +X174272955Y-87997600D01* +X174110345Y-87997600D01* +X174110344Y-87997600D01* +X173950859Y-88029324D01* +X173800631Y-88091550D01* +X173665428Y-88181889D01* +X173550439Y-88296878D01* +X173460100Y-88432081D01* +X173416069Y-88538385D01* +X173376333Y-88584911D01* +X173324605Y-88599500D01* +X172749500Y-88599500D01* +X172691309Y-88580593D01* +X172655345Y-88531093D01* +X172650500Y-88500500D01* +X172650500Y-85875219D01* +X172669407Y-85817028D01* +X172718907Y-85781064D01* +X172780093Y-85781064D01* +X172819504Y-85805215D01* +X173409304Y-86395015D01* +X173437081Y-86449532D01* +X173430765Y-86502903D01* +X173397874Y-86582311D01* +X173366150Y-86741794D01* +X173366150Y-86904405D01* +X173397874Y-87063890D01* +X173460100Y-87214118D01* +X173460101Y-87214120D01* +X173460102Y-87214121D01* +X173550442Y-87349325D01* +X173665425Y-87464308D01* +X173800629Y-87554648D01* +X173950861Y-87616876D01* +X174110345Y-87648600D01* +X174110346Y-87648600D01* +X174272954Y-87648600D01* +X174272955Y-87648600D01* +X174432439Y-87616876D01* +X174582671Y-87554648D01* +X174717875Y-87464308D01* +X174832858Y-87349325D01* +X174923198Y-87214121D01* +X174985426Y-87063889D01* +X175017150Y-86904405D01* +X175017150Y-86790691D01* +X193399500Y-86790691D01* +X193399500Y-86909309D01* +X193426574Y-87010351D01* +X193430202Y-87023890D01* +X193489507Y-87126608D01* +X193489509Y-87126610D01* +X193489511Y-87126613D01* +X193573387Y-87210489D01* +X193573389Y-87210490D01* +X193573391Y-87210492D01* +X193676110Y-87269797D01* +X193676111Y-87269797D01* +X193676114Y-87269799D01* +X193790691Y-87300500D01* +X193790693Y-87300500D01* +X193909307Y-87300500D01* +X193909309Y-87300500D01* +X194023886Y-87269799D01* +X194023888Y-87269797D01* +X194023890Y-87269797D01* +X194126608Y-87210492D01* +X194126608Y-87210491D01* +X194126613Y-87210489D01* +X194210489Y-87126613D01* +X194210492Y-87126608D01* +X194269797Y-87023890D01* +X194269797Y-87023888D01* +X194269799Y-87023886D01* +X194300500Y-86909309D01* +X194300500Y-86790691D01* +X194269799Y-86676114D01* +X194269797Y-86676111D01* +X194269797Y-86676109D01* +X194210492Y-86573391D01* +X194210490Y-86573389D01* +X194210489Y-86573387D01* +X194126613Y-86489511D01* +X194126610Y-86489509D01* +X194126608Y-86489507D01* +X194023889Y-86430202D01* +X194023890Y-86430202D01* +X194006584Y-86425565D01* +X193909309Y-86399500D01* +X193790691Y-86399500D01* +X193720567Y-86418289D01* +X193676109Y-86430202D01* +X193573391Y-86489507D01* +X193489507Y-86573391D01* +X193430202Y-86676109D01* +X193430201Y-86676114D01* +X193399500Y-86790691D01* +X175017150Y-86790691D01* +X175017150Y-86741795D01* +X174985426Y-86582311D01* +X174928649Y-86445239D01* +X174923199Y-86432081D01* +X174918845Y-86425565D01* +X174832858Y-86296875D01* +X174717875Y-86181892D01* +X174717869Y-86181888D01* +X174582668Y-86091550D01* +X174432440Y-86029324D01* +X174272955Y-85997600D01* +X174110345Y-85997600D01* +X174110344Y-85997600D01* +X173950861Y-86029324D01* +X173871453Y-86062215D01* +X173810456Y-86067014D01* +X173763565Y-86040754D01* +X172464605Y-84741794D01* +X173366150Y-84741794D01* +X173366150Y-84904405D01* +X173397874Y-85063890D01* +X173460100Y-85214118D01* +X173460101Y-85214120D01* +X173460102Y-85214121D01* +X173550442Y-85349325D01* +X173665425Y-85464308D01* +X173800629Y-85554648D01* +X173950861Y-85616876D01* +X174110345Y-85648600D01* +X174110346Y-85648600D01* +X174272954Y-85648600D01* +X174272955Y-85648600D01* +X174432439Y-85616876D01* +X174582671Y-85554648D01* +X174717875Y-85464308D01* +X174832858Y-85349325D01* +X174923198Y-85214121D01* +X174985426Y-85063889D01* +X175017150Y-84904405D01* +X175017150Y-84741795D01* +X175014928Y-84730622D01* +X195366650Y-84730622D01* +X195366650Y-84915577D01* +X195395582Y-85098243D01* +X195452734Y-85274141D01* +X195536696Y-85438927D01* +X195536701Y-85438935D01* +X195551664Y-85459529D01* +X196141650Y-84869543D01* +X196141650Y-84875761D01* +X196168909Y-84977494D01* +X196221570Y-85068706D01* +X196296044Y-85143180D01* +X196387256Y-85195841D01* +X196488989Y-85223100D01* +X196495202Y-85223100D01* +X195905218Y-85813084D01* +X195925814Y-85828048D01* +X195925822Y-85828053D01* +X196090610Y-85912016D01* +X196090608Y-85912016D01* +X196117654Y-85920803D01* +X196167155Y-85956766D01* +X196186063Y-86014956D01* +X196167157Y-86073147D01* +X196142065Y-86097273D01* +X196015429Y-86181888D01* +X195900439Y-86296878D01* +X195810100Y-86432081D01* +X195747874Y-86582309D01* +X195716150Y-86741794D01* +X195716150Y-86904405D01* +X195747874Y-87063890D01* +X195810100Y-87214118D01* +X195810101Y-87214120D01* +X195810102Y-87214121D01* +X195900442Y-87349325D01* +X196015425Y-87464308D01* +X196150629Y-87554648D01* +X196300861Y-87616876D01* +X196460345Y-87648600D01* +X196460346Y-87648600D01* +X196622954Y-87648600D01* +X196622955Y-87648600D01* +X196782439Y-87616876D01* +X196932671Y-87554648D01* +X197067875Y-87464308D01* +X197182858Y-87349325D01* +X197273198Y-87214121D01* +X197335426Y-87063889D01* +X197367150Y-86904405D01* +X197367150Y-86741795D01* +X197335426Y-86582311D01* +X197278649Y-86445239D01* +X197273199Y-86432081D01* +X197268845Y-86425565D01* +X197182858Y-86296875D01* +X197067875Y-86181892D01* +X197067869Y-86181888D01* +X196941235Y-86097274D01* +X196903355Y-86049224D01* +X196900953Y-85988086D01* +X196934946Y-85937212D01* +X196965646Y-85920803D01* +X196992688Y-85912017D01* +X196992689Y-85912016D01* +X197157487Y-85828047D01* +X197178080Y-85813084D01* +X196588096Y-85223100D01* +X196594311Y-85223100D01* +X196696044Y-85195841D01* +X196787256Y-85143180D01* +X196861730Y-85068706D01* +X196914391Y-84977494D01* +X196941650Y-84875761D01* +X196941650Y-84869546D01* +X197531634Y-85459530D01* +X197546597Y-85438937D01* +X197630565Y-85274141D01* +X197687717Y-85098243D01* +X197716650Y-84915577D01* +X197716650Y-84730622D01* +X197687717Y-84547956D01* +X197630565Y-84372058D01* +X197546603Y-84207272D01* +X197546598Y-84207264D01* +X197531634Y-84186668D01* +X196941650Y-84776652D01* +X196941650Y-84770439D01* +X196914391Y-84668706D01* +X196861730Y-84577494D01* +X196787256Y-84503020D01* +X196696044Y-84450359D01* +X196594311Y-84423100D01* +X196588094Y-84423100D01* +X197178080Y-83833114D01* +X197157485Y-83818151D01* +X197157477Y-83818146D01* +X196992693Y-83734185D01* +X196965643Y-83725396D01* +X196916143Y-83689432D01* +X196897236Y-83631241D01* +X196916143Y-83573050D01* +X196941232Y-83548927D01* +X197067875Y-83464308D01* +X197182858Y-83349325D01* +X197273198Y-83214121D01* +X197335426Y-83063889D01* +X197367150Y-82904405D01* +X197367150Y-82741795D01* +X197335426Y-82582311D01* +X197294203Y-82482790D01* +X197273199Y-82432081D01* +X197230521Y-82368209D01* +X197182858Y-82296875D01* +X197067875Y-82181892D01* +X197067869Y-82181888D01* +X196932668Y-82091550D01* +X196782440Y-82029324D01* +X196622955Y-81997600D01* +X196460345Y-81997600D01* +X196460344Y-81997600D01* +X196300859Y-82029324D01* +X196150631Y-82091550D01* +X196015428Y-82181889D01* +X195900439Y-82296878D01* +X195810100Y-82432081D01* +X195747874Y-82582309D01* +X195716150Y-82741794D01* +X195716150Y-82904405D01* +X195747874Y-83063890D01* +X195810100Y-83214118D01* +X195810101Y-83214120D01* +X195810102Y-83214121D01* +X195900442Y-83349325D01* +X196015425Y-83464308D01* +X196015428Y-83464310D01* +X196142064Y-83548925D01* +X196179944Y-83596975D01* +X196182346Y-83658113D01* +X196148354Y-83708987D01* +X196117657Y-83725395D01* +X196090610Y-83734183D01* +X195925818Y-83818148D01* +X195905218Y-83833114D01* +X196495204Y-84423100D01* +X196488989Y-84423100D01* +X196387256Y-84450359D01* +X196296044Y-84503020D01* +X196221570Y-84577494D01* +X196168909Y-84668706D01* +X196141650Y-84770439D01* +X196141650Y-84776654D01* +X195551664Y-84186668D01* +X195536698Y-84207268D01* +X195452734Y-84372058D01* +X195395582Y-84547956D01* +X195366650Y-84730622D01* +X175014928Y-84730622D01* +X174985426Y-84582311D01* +X174923198Y-84432079D01* +X174832858Y-84296875D01* +X174717875Y-84181892D01* +X174705152Y-84173391D01* +X174582668Y-84091550D01* +X174432440Y-84029324D01* +X174272955Y-83997600D01* +X174110345Y-83997600D01* +X174110344Y-83997600D01* +X173950859Y-84029324D01* +X173800631Y-84091550D01* +X173665428Y-84181889D01* +X173550439Y-84296878D01* +X173460100Y-84432081D01* +X173397874Y-84582309D01* +X173366150Y-84741794D01* +X172464605Y-84741794D01* +X170942315Y-83219504D01* +X170914538Y-83164987D01* +X170924109Y-83104555D01* +X170967374Y-83061290D01* +X171012319Y-83050500D01* +X173326179Y-83050500D01* +X173384370Y-83069407D01* +X173417643Y-83111615D01* +X173460100Y-83214118D01* +X173460101Y-83214120D01* +X173460102Y-83214121D01* +X173550442Y-83349325D01* +X173665425Y-83464308D01* +X173800629Y-83554648D01* +X173950861Y-83616876D01* +X174110345Y-83648600D01* +X174110346Y-83648600D01* +X174272954Y-83648600D01* +X174272955Y-83648600D01* +X174432439Y-83616876D01* +X174582671Y-83554648D01* +X174717875Y-83464308D01* +X174832858Y-83349325D01* +X174923198Y-83214121D01* +X174985426Y-83063889D01* +X175017150Y-82904405D01* +X175017150Y-82741795D01* +X174985426Y-82582311D01* +X174944203Y-82482790D01* +X174923199Y-82432081D01* +X174880521Y-82368209D01* +X174832858Y-82296875D01* +X174717875Y-82181892D01* +X174717869Y-82181888D01* +X174591235Y-82097274D01* +X174553355Y-82049224D01* +X174550953Y-81988086D01* +X174584946Y-81937212D01* +X174615646Y-81920803D01* +X174642688Y-81912017D01* +X174642689Y-81912016D01* +X174807487Y-81828047D01* +X174828080Y-81813084D01* +X174238096Y-81223100D01* +X174244311Y-81223100D01* +X174346044Y-81195841D01* +X174437256Y-81143180D01* +X174511730Y-81068706D01* +X174564391Y-80977494D01* +X174591650Y-80875761D01* +X174591650Y-80869546D01* +X175181634Y-81459530D01* +X175196597Y-81438937D01* +X175280565Y-81274141D01* +X175337717Y-81098243D01* +X175366650Y-80915577D01* +X175366650Y-80741794D01* +X195716150Y-80741794D01* +X195716150Y-80904405D01* +X195747874Y-81063890D01* +X195810100Y-81214118D01* +X195810101Y-81214120D01* +X195810102Y-81214121D01* +X195900442Y-81349325D01* +X196015425Y-81464308D01* +X196150629Y-81554648D01* +X196150630Y-81554648D01* +X196150631Y-81554649D01* +X196225745Y-81585762D01* +X196300861Y-81616876D01* +X196460345Y-81648600D01* +X196460346Y-81648600D01* +X196622954Y-81648600D01* +X196622955Y-81648600D01* +X196782439Y-81616876D01* +X196932671Y-81554648D01* +X197067875Y-81464308D01* +X197182858Y-81349325D01* +X197273198Y-81214121D01* +X197335426Y-81063889D01* +X197367150Y-80904405D01* +X197367150Y-80741795D01* +X197335426Y-80582311D01* +X197280770Y-80450359D01* +X197273199Y-80432081D01* +X197233455Y-80372600D01* +X197182858Y-80296875D01* +X197067875Y-80181892D01* +X196932671Y-80091552D01* +X196932670Y-80091551D01* +X196932668Y-80091550D01* +X196782440Y-80029324D01* +X196622955Y-79997600D01* +X196460345Y-79997600D01* +X196460344Y-79997600D01* +X196300859Y-80029324D01* +X196150631Y-80091550D01* +X196015428Y-80181889D01* +X195900439Y-80296878D01* +X195810100Y-80432081D01* +X195747874Y-80582309D01* +X195716150Y-80741794D01* +X175366650Y-80741794D01* +X175366650Y-80730622D01* +X175337717Y-80547956D01* +X175280565Y-80372058D01* +X175196603Y-80207272D01* +X175196598Y-80207264D01* +X175181634Y-80186668D01* +X174591650Y-80776652D01* +X174591650Y-80770439D01* +X174564391Y-80668706D01* +X174511730Y-80577494D01* +X174437256Y-80503020D01* +X174346044Y-80450359D01* +X174244311Y-80423100D01* +X174238094Y-80423100D01* +X174828080Y-79833114D01* +X174807485Y-79818151D01* +X174807477Y-79818146D01* +X174642693Y-79734185D01* +X174615643Y-79725396D01* +X174566143Y-79689432D01* +X174547236Y-79631241D01* +X174566143Y-79573050D01* +X174591232Y-79548927D01* +X174717875Y-79464308D01* +X174832858Y-79349325D01* +X174923198Y-79214121D01* +X174985426Y-79063889D01* +X175017150Y-78904405D01* +X175017150Y-78741795D01* +X175017150Y-78741794D01* +X195716150Y-78741794D01* +X195716150Y-78904405D01* +X195747874Y-79063890D01* +X195810100Y-79214118D01* +X195899419Y-79347795D01* +X195900442Y-79349325D01* +X196015425Y-79464308D01* +X196150629Y-79554648D01* +X196300861Y-79616876D01* +X196460345Y-79648600D01* +X196460346Y-79648600D01* +X196622954Y-79648600D01* +X196622955Y-79648600D01* +X196782439Y-79616876D01* +X196932671Y-79554648D01* +X197067875Y-79464308D01* +X197182858Y-79349325D01* +X197273198Y-79214121D01* +X197335426Y-79063889D01* +X197367150Y-78904405D01* +X197367150Y-78741795D01* +X197335426Y-78582311D01* +X197273198Y-78432079D01* +X197182858Y-78296875D01* +X197067875Y-78181892D01* +X196932671Y-78091552D01* +X196932670Y-78091551D01* +X196932668Y-78091550D01* +X196782440Y-78029324D01* +X196622955Y-77997600D01* +X196460345Y-77997600D01* +X196460344Y-77997600D01* +X196300859Y-78029324D01* +X196150631Y-78091550D01* +X196015428Y-78181889D01* +X195900439Y-78296878D01* +X195810100Y-78432081D01* +X195747874Y-78582309D01* +X195716150Y-78741794D01* +X175017150Y-78741794D01* +X174985426Y-78582311D01* +X174923198Y-78432079D01* +X174832858Y-78296875D01* +X174717875Y-78181892D01* +X174582671Y-78091552D01* +X174582670Y-78091551D01* +X174582668Y-78091550D01* +X174432440Y-78029324D01* +X174272955Y-77997600D01* +X174110345Y-77997600D01* +X174110344Y-77997600D01* +X173950859Y-78029324D01* +X173800631Y-78091550D01* +X173665428Y-78181889D01* +X173550439Y-78296878D01* +X173460100Y-78432081D01* +X173397874Y-78582309D01* +X173366150Y-78741794D01* +X173366150Y-78904405D01* +X173397874Y-79063890D01* +X173460100Y-79214118D01* +X173549419Y-79347795D01* +X173550442Y-79349325D01* +X173665425Y-79464308D01* +X173665428Y-79464310D01* +X173792064Y-79548925D01* +X173829944Y-79596975D01* +X173832346Y-79658113D01* +X173798354Y-79708987D01* +X173767657Y-79725395D01* +X173740610Y-79734183D01* +X173575818Y-79818148D01* +X173555218Y-79833114D01* +X174145204Y-80423100D01* +X174138989Y-80423100D01* +X174037256Y-80450359D01* +X173946044Y-80503020D01* +X173871570Y-80577494D01* +X173818909Y-80668706D01* +X173791650Y-80770439D01* +X173791650Y-80776654D01* +X173201664Y-80186668D01* +X173186698Y-80207268D01* +X173102734Y-80372058D01* +X173045582Y-80547956D01* +X173016650Y-80730622D01* +X173016650Y-80915577D01* +X173045582Y-81098243D01* +X173102734Y-81274141D01* +X173186696Y-81438927D01* +X173186701Y-81438935D01* +X173201664Y-81459529D01* +X173791650Y-80869543D01* +X173791650Y-80875761D01* +X173818909Y-80977494D01* +X173871570Y-81068706D01* +X173946044Y-81143180D01* +X174037256Y-81195841D01* +X174138989Y-81223100D01* +X174145202Y-81223100D01* +X173555218Y-81813084D01* +X173575814Y-81828048D01* +X173575822Y-81828053D01* +X173740610Y-81912016D01* +X173740608Y-81912016D01* +X173767654Y-81920803D01* +X173817155Y-81956766D01* +X173836063Y-82014956D01* +X173817157Y-82073147D01* +X173792065Y-82097273D01* +X173665429Y-82181888D01* +X173550439Y-82296878D01* +X173460100Y-82432081D01* +X173436779Y-82488385D01* +X173397043Y-82534911D01* +X173345315Y-82549500D01* +X165700171Y-82549500D01* +X165608105Y-82587634D01* +X155708103Y-92487636D01* +X155708102Y-92487635D01* +X155637635Y-92558103D01* +X155599500Y-92650171D01* +X155599500Y-127255231D01* +X155580593Y-127313422D01* +X155570504Y-127325235D01* +X151425235Y-131470504D01* +X151370718Y-131498281D01* +X151355231Y-131499500D01* +X143950171Y-131499500D01* +X143858105Y-131537634D01* +X141758103Y-133637636D01* +X141758102Y-133637635D01* +X141687635Y-133708103D01* +X141649500Y-133800171D01* +X141649500Y-135172390D01* +X141630593Y-135230581D01* +X141620504Y-135242393D01* +X141539511Y-135323386D01* +X141539507Y-135323391D01* +X141480202Y-135426109D01* +X141475304Y-135444388D01* +X141449500Y-135540691D01* +X87029472Y-135540691D01* +X87042150Y-135444388D01* +X87042150Y-135201812D01* +X87010488Y-134961311D01* +X86947704Y-134727000D01* +X86854874Y-134502888D01* +X86733586Y-134292811D01* +X86585915Y-134100362D01* +X86414388Y-133928835D01* +X86414383Y-133928831D01* +X86414381Y-133928829D01* +X86221942Y-133781166D01* +X86193490Y-133764739D01* +X86011862Y-133659876D01* +X86011858Y-133659874D01* +X86011854Y-133659872D01* +X85787755Y-133567048D01* +X85787754Y-133567047D01* +X85787750Y-133567046D01* +X85553439Y-133504262D01* +X85553436Y-133504261D01* +X85553434Y-133504261D01* +X85312939Y-133472600D01* +X85312938Y-133472600D01* +X85070362Y-133472600D01* +X85070360Y-133472600D01* +X84829868Y-133504261D01* +X84829863Y-133504261D01* +X84595557Y-133567044D01* +X84595544Y-133567048D01* +X84371445Y-133659872D01* +X84161357Y-133781166D01* +X83968918Y-133928829D01* +X83797379Y-134100368D01* +X83649716Y-134292807D01* +X83528422Y-134502895D01* +X83435598Y-134726994D01* +X83435594Y-134727007D01* +X83372811Y-134961313D01* +X83372811Y-134961318D01* +X83341150Y-135201810D01* +X80857322Y-135201810D01* +X80850819Y-128768272D01* +X114301150Y-128768272D01* +X114301150Y-130397927D01* +X114309882Y-130441820D01* +X114309884Y-130441824D01* +X114327167Y-130467690D01* +X114343146Y-130491604D01* +X114392928Y-130524867D01* +X114403977Y-130527064D01* +X114436822Y-130533599D01* +X114436828Y-130533599D01* +X114436830Y-130533600D01* +X114436831Y-130533600D01* +X116066469Y-130533600D01* +X116066470Y-130533600D01* +X116066471Y-130533599D01* +X116066477Y-130533599D01* +X116088273Y-130529262D01* +X116110372Y-130524867D01* +X116160154Y-130491604D01* +X116193417Y-130441822D01* +X116202150Y-130397920D01* +X116202150Y-129489481D01* +X116841150Y-129489481D01* +X116841150Y-129676718D01* +X116877676Y-129860349D01* +X116949327Y-130033329D01* +X116949331Y-130033338D01* +X117023715Y-130144659D01* +X117053348Y-130189008D01* +X117185742Y-130321402D01* +X117252113Y-130365749D01* +X117341411Y-130425418D01* +X117341417Y-130425420D01* +X117341419Y-130425422D01* +X117514399Y-130497073D01* +X117698034Y-130533600D01* +X117698035Y-130533600D01* +X117885265Y-130533600D01* +X117885266Y-130533600D01* +X118068901Y-130497073D01* +X118241881Y-130425422D01* +X118241884Y-130425419D01* +X118241888Y-130425418D01* +X118286837Y-130395382D01* +X118397558Y-130321402D01* +X118529952Y-130189008D01* +X118623486Y-130049025D01* +X118633968Y-130033338D01* +X118633969Y-130033334D01* +X118633972Y-130033331D01* +X118705623Y-129860351D01* +X118742150Y-129676716D01* +X118742150Y-129489484D01* +X118742149Y-129489481D01* +X119381150Y-129489481D01* +X119381150Y-129676718D01* +X119417676Y-129860349D01* +X119489327Y-130033329D01* +X119489331Y-130033338D01* +X119563715Y-130144659D01* +X119593348Y-130189008D01* +X119725742Y-130321402D01* +X119792113Y-130365749D01* +X119881411Y-130425418D01* +X119881417Y-130425420D01* +X119881419Y-130425422D01* +X120054399Y-130497073D01* +X120238034Y-130533600D01* +X120238035Y-130533600D01* +X120425265Y-130533600D01* +X120425266Y-130533600D01* +X120608901Y-130497073D01* +X120781881Y-130425422D01* +X120781884Y-130425419D01* +X120781888Y-130425418D01* +X120826837Y-130395382D01* +X120937558Y-130321402D01* +X121069952Y-130189008D01* +X121163486Y-130049025D01* +X121173968Y-130033338D01* +X121173969Y-130033334D01* +X121173972Y-130033331D01* +X121245623Y-129860351D01* +X121282150Y-129676716D01* +X121282150Y-129489484D01* +X121282149Y-129489481D01* +X121921150Y-129489481D01* +X121921150Y-129676718D01* +X121957676Y-129860349D01* +X122029327Y-130033329D01* +X122029331Y-130033338D01* +X122103715Y-130144659D01* +X122133348Y-130189008D01* +X122265742Y-130321402D01* +X122332113Y-130365749D01* +X122421411Y-130425418D01* +X122421417Y-130425420D01* +X122421419Y-130425422D01* +X122594399Y-130497073D01* +X122778034Y-130533600D01* +X122778035Y-130533600D01* +X122965265Y-130533600D01* +X122965266Y-130533600D01* +X123148901Y-130497073D01* +X123321881Y-130425422D01* +X123321884Y-130425419D01* +X123321888Y-130425418D01* +X123366837Y-130395382D01* +X123477558Y-130321402D01* +X123609952Y-130189008D01* +X123703486Y-130049025D01* +X123713968Y-130033338D01* +X123713969Y-130033334D01* +X123713972Y-130033331D01* +X123785623Y-129860351D01* +X123822150Y-129676716D01* +X123822150Y-129489484D01* +X123822149Y-129489481D01* +X124461150Y-129489481D01* +X124461150Y-129676718D01* +X124497676Y-129860349D01* +X124569327Y-130033329D01* +X124569331Y-130033338D01* +X124643715Y-130144659D01* +X124673348Y-130189008D01* +X124805742Y-130321402D01* +X124872113Y-130365749D01* +X124961411Y-130425418D01* +X124961417Y-130425420D01* +X124961419Y-130425422D01* +X125134399Y-130497073D01* +X125318034Y-130533600D01* +X125318035Y-130533600D01* +X125505265Y-130533600D01* +X125505266Y-130533600D01* +X125688901Y-130497073D01* +X125861881Y-130425422D01* +X125861884Y-130425419D01* +X125861888Y-130425418D01* +X125906837Y-130395382D01* +X126017558Y-130321402D01* +X126149952Y-130189008D01* +X126243486Y-130049025D01* +X126253968Y-130033338D01* +X126253969Y-130033334D01* +X126253972Y-130033331D01* +X126325623Y-129860351D01* +X126362150Y-129676716D01* +X126362150Y-129489484D01* +X126331043Y-129333099D01* +X126675040Y-129333099D01* +X126675041Y-129333100D01* +X127518638Y-129333100D01* +X127485725Y-129390107D01* +X127451650Y-129517274D01* +X127451650Y-129648926D01* +X127485725Y-129776093D01* +X127518638Y-129833100D01* +X126675040Y-129833100D01* +X126683659Y-129887514D01* +X126746893Y-130082127D01* +X126839788Y-130264446D01* +X126960064Y-130429991D01* +X127104758Y-130574685D01* +X127270303Y-130694961D01* +X127452622Y-130787856D01* +X127647239Y-130851091D01* +X127647235Y-130851091D01* +X127701649Y-130859708D01* +X127701650Y-130859707D01* +X127701650Y-130016112D01* +X127758657Y-130049025D01* +X127885824Y-130083100D01* +X128017476Y-130083100D01* +X128144643Y-130049025D01* +X128201650Y-130016112D01* +X128201650Y-130859708D01* +X128256062Y-130851091D01* +X128450677Y-130787856D01* +X128632996Y-130694961D01* +X128798541Y-130574685D01* +X128943235Y-130429991D01* +X129063511Y-130264447D01* +X129133440Y-130127202D01* +X129176705Y-130083938D01* +X129237137Y-130074366D01* +X129291653Y-130102143D01* +X129309860Y-130127202D01* +X129379788Y-130264447D01* +X129500064Y-130429991D01* +X129644758Y-130574685D01* +X129810303Y-130694961D01* +X129992622Y-130787856D01* +X130187239Y-130851091D01* +X130187235Y-130851091D01* +X130241649Y-130859708D01* +X130241650Y-130859707D01* +X130241650Y-130016112D01* +X130298657Y-130049025D01* +X130425824Y-130083100D01* +X130557476Y-130083100D01* +X130684643Y-130049025D01* +X130741650Y-130016112D01* +X130741650Y-130859708D01* +X130796062Y-130851091D01* +X130990677Y-130787856D01* +X131172996Y-130694961D01* +X131338541Y-130574685D01* +X131483235Y-130429991D01* +X131603511Y-130264446D01* +X131696406Y-130082127D01* +X131759640Y-129887514D01* +X131768259Y-129833100D01* +X130924662Y-129833100D01* +X130957575Y-129776093D01* +X130991650Y-129648926D01* +X130991650Y-129517274D01* +X130984203Y-129489481D01* +X132081150Y-129489481D01* +X132081150Y-129676718D01* +X132117676Y-129860349D01* +X132189327Y-130033329D01* +X132189331Y-130033338D01* +X132263715Y-130144659D01* +X132293348Y-130189008D01* +X132425742Y-130321402D01* +X132492113Y-130365749D01* +X132581411Y-130425418D01* +X132581417Y-130425420D01* +X132581419Y-130425422D01* +X132754399Y-130497073D01* +X132938034Y-130533600D01* +X132938035Y-130533600D01* +X133125265Y-130533600D01* +X133125266Y-130533600D01* +X133308901Y-130497073D01* +X133481881Y-130425422D01* +X133481884Y-130425419D01* +X133481888Y-130425418D01* +X133526837Y-130395382D01* +X133637558Y-130321402D01* +X133769952Y-130189008D01* +X133863486Y-130049025D01* +X133873968Y-130033338D01* +X133873969Y-130033334D01* +X133873972Y-130033331D01* +X133945623Y-129860351D01* +X133982150Y-129676716D01* +X133982150Y-129489484D01* +X133982149Y-129489481D01* +X137161150Y-129489481D01* +X137161150Y-129676718D01* +X137197676Y-129860349D01* +X137269327Y-130033329D01* +X137269331Y-130033338D01* +X137343715Y-130144659D01* +X137373348Y-130189008D01* +X137505742Y-130321402D01* +X137572113Y-130365749D01* +X137661411Y-130425418D01* +X137661417Y-130425420D01* +X137661419Y-130425422D01* +X137834399Y-130497073D01* +X138018034Y-130533600D01* +X138018035Y-130533600D01* +X138205265Y-130533600D01* +X138205266Y-130533600D01* +X138388901Y-130497073D01* +X138561881Y-130425422D01* +X138561884Y-130425419D01* +X138561888Y-130425418D01* +X138606837Y-130395382D01* +X138717558Y-130321402D01* +X138849952Y-130189008D01* +X138943486Y-130049025D01* +X138953968Y-130033338D01* +X138953969Y-130033334D01* +X138953972Y-130033331D01* +X139025623Y-129860351D01* +X139062150Y-129676716D01* +X139062150Y-129489484D01* +X139062149Y-129489481D01* +X139701150Y-129489481D01* +X139701150Y-129676718D01* +X139737676Y-129860349D01* +X139809327Y-130033329D01* +X139809331Y-130033338D01* +X139883715Y-130144659D01* +X139913348Y-130189008D01* +X140045742Y-130321402D01* +X140112113Y-130365749D01* +X140201411Y-130425418D01* +X140201417Y-130425420D01* +X140201419Y-130425422D01* +X140374399Y-130497073D01* +X140558034Y-130533600D01* +X140558035Y-130533600D01* +X140745265Y-130533600D01* +X140745266Y-130533600D01* +X140928901Y-130497073D01* +X141101881Y-130425422D01* +X141101884Y-130425419D01* +X141101888Y-130425418D01* +X141146837Y-130395382D01* +X141257558Y-130321402D01* +X141389952Y-130189008D01* +X141483486Y-130049025D01* +X141493968Y-130033338D01* +X141493969Y-130033334D01* +X141493972Y-130033331D01* +X141565623Y-129860351D01* +X141602150Y-129676716D01* +X141602150Y-129489484D01* +X141602149Y-129489481D01* +X142241150Y-129489481D01* +X142241150Y-129676718D01* +X142277676Y-129860349D01* +X142349327Y-130033329D01* +X142349331Y-130033338D01* +X142423715Y-130144659D01* +X142453348Y-130189008D01* +X142585742Y-130321402D01* +X142652113Y-130365749D01* +X142741411Y-130425418D01* +X142741417Y-130425420D01* +X142741419Y-130425422D01* +X142914399Y-130497073D01* +X143098034Y-130533600D01* +X143098035Y-130533600D01* +X143285265Y-130533600D01* +X143285266Y-130533600D01* +X143468901Y-130497073D01* +X143641881Y-130425422D01* +X143641884Y-130425419D01* +X143641888Y-130425418D01* +X143686837Y-130395382D01* +X143797558Y-130321402D01* +X143929952Y-130189008D01* +X144023486Y-130049025D01* +X144033968Y-130033338D01* +X144033969Y-130033334D01* +X144033972Y-130033331D01* +X144105623Y-129860351D01* +X144142150Y-129676716D01* +X144142150Y-129489484D01* +X144142149Y-129489481D01* +X144781150Y-129489481D01* +X144781150Y-129676718D01* +X144817676Y-129860349D01* +X144889327Y-130033329D01* +X144889331Y-130033338D01* +X144963715Y-130144659D01* +X144993348Y-130189008D01* +X145125742Y-130321402D01* +X145192113Y-130365749D01* +X145281411Y-130425418D01* +X145281417Y-130425420D01* +X145281419Y-130425422D01* +X145454399Y-130497073D01* +X145638034Y-130533600D01* +X145638035Y-130533600D01* +X145825265Y-130533600D01* +X145825266Y-130533600D01* +X146008901Y-130497073D01* +X146181881Y-130425422D01* +X146181884Y-130425419D01* +X146181888Y-130425418D01* +X146226837Y-130395382D01* +X146337558Y-130321402D01* +X146469952Y-130189008D01* +X146563486Y-130049025D01* +X146573968Y-130033338D01* +X146573969Y-130033334D01* +X146573972Y-130033331D01* +X146645623Y-129860351D01* +X146682150Y-129676716D01* +X146682150Y-129489484D01* +X146682149Y-129489481D01* +X147321150Y-129489481D01* +X147321150Y-129676718D01* +X147357676Y-129860349D01* +X147429327Y-130033329D01* +X147429331Y-130033338D01* +X147503715Y-130144659D01* +X147533348Y-130189008D01* +X147665742Y-130321402D01* +X147732113Y-130365749D01* +X147821411Y-130425418D01* +X147821417Y-130425420D01* +X147821419Y-130425422D01* +X147994399Y-130497073D01* +X148178034Y-130533600D01* +X148178035Y-130533600D01* +X148365265Y-130533600D01* +X148365266Y-130533600D01* +X148548901Y-130497073D01* +X148721881Y-130425422D01* +X148721884Y-130425419D01* +X148721888Y-130425418D01* +X148766837Y-130395382D01* +X148877558Y-130321402D01* +X149009952Y-130189008D01* +X149103486Y-130049025D01* +X149113968Y-130033338D01* +X149113969Y-130033334D01* +X149113972Y-130033331D01* +X149185623Y-129860351D01* +X149222150Y-129676716D01* +X149222150Y-129489484D01* +X149222149Y-129489481D01* +X149861150Y-129489481D01* +X149861150Y-129676718D01* +X149897676Y-129860349D01* +X149969327Y-130033329D01* +X149969331Y-130033338D01* +X150043715Y-130144659D01* +X150073348Y-130189008D01* +X150205742Y-130321402D01* +X150272113Y-130365749D01* +X150361411Y-130425418D01* +X150361417Y-130425420D01* +X150361419Y-130425422D01* +X150534399Y-130497073D01* +X150718034Y-130533600D01* +X150718035Y-130533600D01* +X150905265Y-130533600D01* +X150905266Y-130533600D01* +X151088901Y-130497073D01* +X151261881Y-130425422D01* +X151261884Y-130425419D01* +X151261888Y-130425418D01* +X151306837Y-130395382D01* +X151417558Y-130321402D01* +X151549952Y-130189008D01* +X151643486Y-130049025D01* +X151653968Y-130033338D01* +X151653969Y-130033334D01* +X151653972Y-130033331D01* +X151725623Y-129860351D01* +X151762150Y-129676716D01* +X151762150Y-129489484D01* +X151725623Y-129305849D01* +X151653972Y-129132869D01* +X151653970Y-129132867D01* +X151653968Y-129132861D01* +X151581560Y-129024497D01* +X151549952Y-128977192D01* +X151417558Y-128844798D01* +X151373209Y-128815165D01* +X151261888Y-128740781D01* +X151261879Y-128740777D01* +X151088899Y-128669126D01* +X150905268Y-128632600D01* +X150905266Y-128632600D01* +X150718034Y-128632600D01* +X150718031Y-128632600D01* +X150534400Y-128669126D01* +X150361420Y-128740777D01* +X150361411Y-128740781D01* +X150205742Y-128844798D01* +X150205738Y-128844801D01* +X150073351Y-128977188D01* +X150073348Y-128977192D01* +X149969331Y-129132861D01* +X149969327Y-129132870D01* +X149897676Y-129305850D01* +X149861150Y-129489481D01* +X149222149Y-129489481D01* +X149185623Y-129305849D01* +X149113972Y-129132869D01* +X149113970Y-129132867D01* +X149113968Y-129132861D01* +X149041560Y-129024497D01* +X149009952Y-128977192D01* +X148877558Y-128844798D01* +X148833209Y-128815165D01* +X148721888Y-128740781D01* +X148721879Y-128740777D01* +X148548899Y-128669126D01* +X148365268Y-128632600D01* +X148365266Y-128632600D01* +X148178034Y-128632600D01* +X148178031Y-128632600D01* +X147994400Y-128669126D01* +X147821420Y-128740777D01* +X147821411Y-128740781D01* +X147665742Y-128844798D01* +X147665738Y-128844801D01* +X147533351Y-128977188D01* +X147533348Y-128977192D01* +X147429331Y-129132861D01* +X147429327Y-129132870D01* +X147357676Y-129305850D01* +X147321150Y-129489481D01* +X146682149Y-129489481D01* +X146645623Y-129305849D01* +X146573972Y-129132869D01* +X146573970Y-129132867D01* +X146573968Y-129132861D01* +X146501560Y-129024497D01* +X146469952Y-128977192D01* +X146337558Y-128844798D01* +X146293209Y-128815165D01* +X146181888Y-128740781D01* +X146181879Y-128740777D01* +X146008899Y-128669126D01* +X145825268Y-128632600D01* +X145825266Y-128632600D01* +X145638034Y-128632600D01* +X145638031Y-128632600D01* +X145454400Y-128669126D01* +X145281420Y-128740777D01* +X145281411Y-128740781D01* +X145125742Y-128844798D01* +X145125738Y-128844801D01* +X144993351Y-128977188D01* +X144993348Y-128977192D01* +X144889331Y-129132861D01* +X144889327Y-129132870D01* +X144817676Y-129305850D01* +X144781150Y-129489481D01* +X144142149Y-129489481D01* +X144105623Y-129305849D01* +X144033972Y-129132869D01* +X144033970Y-129132867D01* +X144033968Y-129132861D01* +X143961560Y-129024497D01* +X143929952Y-128977192D01* +X143797558Y-128844798D01* +X143753209Y-128815165D01* +X143641888Y-128740781D01* +X143641879Y-128740777D01* +X143468899Y-128669126D01* +X143285268Y-128632600D01* +X143285266Y-128632600D01* +X143098034Y-128632600D01* +X143098031Y-128632600D01* +X142914400Y-128669126D01* +X142741420Y-128740777D01* +X142741411Y-128740781D01* +X142585742Y-128844798D01* +X142585738Y-128844801D01* +X142453351Y-128977188D01* +X142453348Y-128977192D01* +X142349331Y-129132861D01* +X142349327Y-129132870D01* +X142277676Y-129305850D01* +X142241150Y-129489481D01* +X141602149Y-129489481D01* +X141565623Y-129305849D01* +X141493972Y-129132869D01* +X141493970Y-129132867D01* +X141493968Y-129132861D01* +X141421560Y-129024497D01* +X141389952Y-128977192D01* +X141257558Y-128844798D01* +X141213209Y-128815165D01* +X141101888Y-128740781D01* +X141101879Y-128740777D01* +X140928899Y-128669126D01* +X140745268Y-128632600D01* +X140745266Y-128632600D01* +X140558034Y-128632600D01* +X140558031Y-128632600D01* +X140374400Y-128669126D01* +X140201420Y-128740777D01* +X140201411Y-128740781D01* +X140045742Y-128844798D01* +X140045738Y-128844801D01* +X139913351Y-128977188D01* +X139913348Y-128977192D01* +X139809331Y-129132861D01* +X139809327Y-129132870D01* +X139737676Y-129305850D01* +X139701150Y-129489481D01* +X139062149Y-129489481D01* +X139025623Y-129305849D01* +X138953972Y-129132869D01* +X138953970Y-129132867D01* +X138953968Y-129132861D01* +X138881560Y-129024497D01* +X138849952Y-128977192D01* +X138717558Y-128844798D01* +X138673209Y-128815165D01* +X138561888Y-128740781D01* +X138561879Y-128740777D01* +X138388899Y-128669126D01* +X138205268Y-128632600D01* +X138205266Y-128632600D01* +X138018034Y-128632600D01* +X138018031Y-128632600D01* +X137834400Y-128669126D01* +X137661420Y-128740777D01* +X137661411Y-128740781D01* +X137505742Y-128844798D01* +X137505738Y-128844801D01* +X137373351Y-128977188D01* +X137373348Y-128977192D01* +X137269331Y-129132861D01* +X137269327Y-129132870D01* +X137197676Y-129305850D01* +X137161150Y-129489481D01* +X133982149Y-129489481D01* +X133945623Y-129305849D01* +X133873972Y-129132869D01* +X133873970Y-129132867D01* +X133873968Y-129132861D01* +X133801560Y-129024497D01* +X133769952Y-128977192D01* +X133637558Y-128844798D01* +X133593209Y-128815165D01* +X133481888Y-128740781D01* +X133481879Y-128740777D01* +X133308899Y-128669126D01* +X133125268Y-128632600D01* +X133125266Y-128632600D01* +X132938034Y-128632600D01* +X132938031Y-128632600D01* +X132754400Y-128669126D01* +X132581420Y-128740777D01* +X132581411Y-128740781D01* +X132425742Y-128844798D01* +X132425738Y-128844801D01* +X132293351Y-128977188D01* +X132293348Y-128977192D01* +X132189331Y-129132861D01* +X132189327Y-129132870D01* +X132117676Y-129305850D01* +X132081150Y-129489481D01* +X130984203Y-129489481D01* +X130957575Y-129390107D01* +X130924662Y-129333100D01* +X131768259Y-129333100D01* +X131768259Y-129333099D01* +X131759640Y-129278685D01* +X131696406Y-129084072D01* +X131603511Y-128901753D01* +X131483235Y-128736208D01* +X131338541Y-128591514D01* +X131172996Y-128471238D01* +X130990677Y-128378343D01* +X130796064Y-128315109D01* +X130741650Y-128306490D01* +X130741650Y-129150088D01* +X130684643Y-129117175D01* +X130557476Y-129083100D01* +X130425824Y-129083100D01* +X130298657Y-129117175D01* +X130241650Y-129150088D01* +X130241650Y-128306491D01* +X130241649Y-128306490D01* +X130187235Y-128315109D01* +X129992622Y-128378343D01* +X129810303Y-128471238D01* +X129644758Y-128591514D01* +X129500064Y-128736208D01* +X129379788Y-128901753D01* +X129309860Y-129038997D01* +X129266595Y-129082262D01* +X129206163Y-129091833D01* +X129151647Y-129064056D01* +X129133440Y-129038997D01* +X129063511Y-128901753D01* +X128943235Y-128736208D01* +X128798541Y-128591514D01* +X128632996Y-128471238D01* +X128450677Y-128378343D01* +X128256064Y-128315109D01* +X128201650Y-128306490D01* +X128201650Y-129150088D01* +X128144643Y-129117175D01* +X128017476Y-129083100D01* +X127885824Y-129083100D01* +X127758657Y-129117175D01* +X127701650Y-129150088D01* +X127701650Y-128306491D01* +X127701649Y-128306490D01* +X127647235Y-128315109D01* +X127452622Y-128378343D01* +X127270303Y-128471238D01* +X127104758Y-128591514D01* +X126960064Y-128736208D01* +X126839788Y-128901753D01* +X126746893Y-129084072D01* +X126683659Y-129278685D01* +X126675040Y-129333099D01* +X126331043Y-129333099D01* +X126325623Y-129305849D01* +X126253972Y-129132869D01* +X126253970Y-129132867D01* +X126253968Y-129132861D01* +X126181560Y-129024497D01* +X126149952Y-128977192D01* +X126017558Y-128844798D01* +X125973209Y-128815165D01* +X125861888Y-128740781D01* +X125861879Y-128740777D01* +X125688899Y-128669126D01* +X125505268Y-128632600D01* +X125505266Y-128632600D01* +X125318034Y-128632600D01* +X125318031Y-128632600D01* +X125134400Y-128669126D01* +X124961420Y-128740777D01* +X124961411Y-128740781D01* +X124805742Y-128844798D01* +X124805738Y-128844801D01* +X124673351Y-128977188D01* +X124673348Y-128977192D01* +X124569331Y-129132861D01* +X124569327Y-129132870D01* +X124497676Y-129305850D01* +X124461150Y-129489481D01* +X123822149Y-129489481D01* +X123785623Y-129305849D01* +X123713972Y-129132869D01* +X123713970Y-129132867D01* +X123713968Y-129132861D01* +X123641560Y-129024497D01* +X123609952Y-128977192D01* +X123477558Y-128844798D01* +X123433209Y-128815165D01* +X123321888Y-128740781D01* +X123321879Y-128740777D01* +X123148899Y-128669126D01* +X122965268Y-128632600D01* +X122965266Y-128632600D01* +X122778034Y-128632600D01* +X122778031Y-128632600D01* +X122594400Y-128669126D01* +X122421420Y-128740777D01* +X122421411Y-128740781D01* +X122265742Y-128844798D01* +X122265738Y-128844801D01* +X122133351Y-128977188D01* +X122133348Y-128977192D01* +X122029331Y-129132861D01* +X122029327Y-129132870D01* +X121957676Y-129305850D01* +X121921150Y-129489481D01* +X121282149Y-129489481D01* +X121245623Y-129305849D01* +X121173972Y-129132869D01* +X121173970Y-129132867D01* +X121173968Y-129132861D01* +X121101560Y-129024497D01* +X121069952Y-128977192D01* +X120937558Y-128844798D01* +X120893209Y-128815165D01* +X120781888Y-128740781D01* +X120781879Y-128740777D01* +X120608899Y-128669126D01* +X120425268Y-128632600D01* +X120425266Y-128632600D01* +X120238034Y-128632600D01* +X120238031Y-128632600D01* +X120054400Y-128669126D01* +X119881420Y-128740777D01* +X119881411Y-128740781D01* +X119725742Y-128844798D01* +X119725738Y-128844801D01* +X119593351Y-128977188D01* +X119593348Y-128977192D01* +X119489331Y-129132861D01* +X119489327Y-129132870D01* +X119417676Y-129305850D01* +X119381150Y-129489481D01* +X118742149Y-129489481D01* +X118705623Y-129305849D01* +X118633972Y-129132869D01* +X118633970Y-129132867D01* +X118633968Y-129132861D01* +X118561560Y-129024497D01* +X118529952Y-128977192D01* +X118397558Y-128844798D01* +X118353209Y-128815165D01* +X118241888Y-128740781D01* +X118241879Y-128740777D01* +X118068899Y-128669126D01* +X117885268Y-128632600D01* +X117885266Y-128632600D01* +X117698034Y-128632600D01* +X117698031Y-128632600D01* +X117514400Y-128669126D01* +X117341420Y-128740777D01* +X117341411Y-128740781D01* +X117185742Y-128844798D01* +X117185738Y-128844801D01* +X117053351Y-128977188D01* +X117053348Y-128977192D01* +X116949331Y-129132861D01* +X116949327Y-129132870D01* +X116877676Y-129305850D01* +X116841150Y-129489481D01* +X116202150Y-129489481D01* +X116202150Y-128768280D01* +X116202149Y-128768278D01* +X116202149Y-128768272D01* +X116193417Y-128724379D01* +X116193415Y-128724375D01* +X116160155Y-128674598D01* +X116160154Y-128674596D01* +X116140774Y-128661647D01* +X116110374Y-128641334D01* +X116110370Y-128641332D01* +X116066477Y-128632600D01* +X116066470Y-128632600D01* +X114436830Y-128632600D01* +X114436822Y-128632600D01* +X114392929Y-128641332D01* +X114392925Y-128641334D01* +X114343148Y-128674594D01* +X114343144Y-128674598D01* +X114309884Y-128724375D01* +X114309882Y-128724379D01* +X114301150Y-128768272D01* +X80850819Y-128768272D01* +X80836932Y-115030291D01* +X100619750Y-115030291D01* +X100619750Y-115148909D01* +X100634137Y-115202600D01* +X100650452Y-115263490D01* +X100709757Y-115366208D01* +X100709759Y-115366210D01* +X100709761Y-115366213D01* +X100793637Y-115450089D01* +X100793639Y-115450090D01* +X100793641Y-115450092D01* +X100896360Y-115509397D01* +X100896361Y-115509397D01* +X100896364Y-115509399D01* +X101010941Y-115540100D01* +X101010943Y-115540100D01* +X101129557Y-115540100D01* +X101129559Y-115540100D01* +X101244136Y-115509399D01* +X101244138Y-115509397D01* +X101244140Y-115509397D01* +X101346858Y-115450092D01* +X101346858Y-115450091D01* +X101346863Y-115450089D01* +X101430739Y-115366213D01* +X101490049Y-115263486D01* +X101520750Y-115148909D01* +X101520750Y-115030291D01* +X101490049Y-114915714D01* +X101490047Y-114915711D01* +X101490047Y-114915709D01* +X101430742Y-114812991D01* +X101430740Y-114812989D01* +X101430739Y-114812987D01* +X101346863Y-114729111D01* +X101346860Y-114729109D01* +X101346858Y-114729107D01* +X101244139Y-114669802D01* +X101244140Y-114669802D01* +X101230601Y-114666174D01* +X101129559Y-114639100D01* +X101010941Y-114639100D01* +X100940817Y-114657889D01* +X100896359Y-114669802D01* +X100793641Y-114729107D01* +X100709757Y-114812991D01* +X100650452Y-114915709D01* +X100633287Y-114979769D01* +X100619750Y-115030291D01* +X80836932Y-115030291D01* +X80834929Y-113049091D01* +X110518850Y-113049091D01* +X110518850Y-113167709D01* +X110527688Y-113200691D01* +X110549552Y-113282290D01* +X110608857Y-113385008D01* +X110608859Y-113385010D01* +X110608861Y-113385013D01* +X110692737Y-113468889D01* +X110692739Y-113468890D01* +X110692741Y-113468892D01* +X110795460Y-113528197D01* +X110795461Y-113528197D01* +X110795464Y-113528199D01* +X110910041Y-113558900D01* +X110910043Y-113558900D01* +X111028657Y-113558900D01* +X111028659Y-113558900D01* +X111143236Y-113528199D01* +X111143238Y-113528197D01* +X111143240Y-113528197D01* +X111245958Y-113468892D01* +X111245958Y-113468891D01* +X111245963Y-113468889D01* +X111329839Y-113385013D01* +X111384874Y-113289691D01* +X126183650Y-113289691D01* +X126183650Y-113408309D01* +X126199883Y-113468892D01* +X126214352Y-113522890D01* +X126273657Y-113625608D01* +X126273659Y-113625610D01* +X126273661Y-113625613D01* +X126357537Y-113709489D01* +X126357539Y-113709490D01* +X126357541Y-113709492D01* +X126460260Y-113768797D01* +X126460261Y-113768797D01* +X126460264Y-113768799D01* +X126574841Y-113799500D01* +X126574843Y-113799500D01* +X126693457Y-113799500D01* +X126693459Y-113799500D01* +X126808036Y-113768799D01* +X126808038Y-113768797D01* +X126808040Y-113768797D01* +X126910758Y-113709492D01* +X126910758Y-113709491D01* +X126910763Y-113709489D01* +X126994639Y-113625613D01* +X127023218Y-113576114D01* +X127053947Y-113522890D01* +X127053947Y-113522888D01* +X127053949Y-113522886D01* +X127084650Y-113408309D01* +X127084650Y-113289691D01* +X127053949Y-113175114D01* +X127053947Y-113175111D01* +X127053947Y-113175109D01* +X126994642Y-113072391D01* +X126994640Y-113072389D01* +X126994639Y-113072387D01* +X126910763Y-112988511D01* +X126910760Y-112988509D01* +X126910758Y-112988507D01* +X126808039Y-112929202D01* +X126808040Y-112929202D01* +X126794501Y-112925574D01* +X126693459Y-112898500D01* +X126574841Y-112898500D01* +X126504717Y-112917289D01* +X126460259Y-112929202D01* +X126357541Y-112988507D01* +X126273657Y-113072391D01* +X126214352Y-113175109D01* +X126197187Y-113239169D01* +X126183650Y-113289691D01* +X111384874Y-113289691D01* +X111389149Y-113282286D01* +X111419850Y-113167709D01* +X111419850Y-113049091D01* +X111389149Y-112934514D01* +X111389147Y-112934511D01* +X111389147Y-112934509D01* +X111329842Y-112831791D01* +X111329840Y-112831789D01* +X111329839Y-112831787D01* +X111245963Y-112747911D01* +X111245960Y-112747909D01* +X111245958Y-112747907D01* +X111143239Y-112688602D01* +X111143240Y-112688602D01* +X111111573Y-112680117D01* +X111028659Y-112657900D01* +X110910041Y-112657900D01* +X110839917Y-112676689D01* +X110795459Y-112688602D01* +X110692741Y-112747907D01* +X110608857Y-112831791D01* +X110549552Y-112934509D01* +X110535082Y-112988511D01* +X110518850Y-113049091D01* +X80834929Y-113049091D01* +X80833387Y-111523491D01* +X106381450Y-111523491D01* +X106381450Y-111642109D01* +X106400442Y-111712986D01* +X106412152Y-111756690D01* +X106471457Y-111859408D01* +X106471459Y-111859410D01* +X106471461Y-111859413D01* +X106555337Y-111943289D01* +X106555339Y-111943290D01* +X106555341Y-111943292D01* +X106658060Y-112002597D01* +X106658061Y-112002597D01* +X106658064Y-112002599D01* +X106772641Y-112033300D01* +X106772643Y-112033300D01* +X106891257Y-112033300D01* +X106891259Y-112033300D01* +X107005836Y-112002599D01* +X107005838Y-112002597D01* +X107005840Y-112002597D01* +X107108558Y-111943292D01* +X107108558Y-111943291D01* +X107108563Y-111943289D01* +X107192439Y-111859413D01* +X107192442Y-111859408D01* +X107251747Y-111756690D01* +X107251747Y-111756688D01* +X107251749Y-111756686D01* +X107282450Y-111642109D01* +X107282450Y-111523491D01* +X107270741Y-111479791D01* +X110326750Y-111479791D01* +X110326750Y-111598409D01* +X110348261Y-111678689D01* +X110357452Y-111712990D01* +X110416757Y-111815708D01* +X110416759Y-111815710D01* +X110416761Y-111815713D01* +X110500637Y-111899589D01* +X110500639Y-111899590D01* +X110500641Y-111899592D01* +X110603360Y-111958897D01* +X110603361Y-111958897D01* +X110603364Y-111958899D01* +X110717941Y-111989600D01* +X110717943Y-111989600D01* +X110836557Y-111989600D01* +X110836559Y-111989600D01* +X110951136Y-111958899D01* +X110951138Y-111958897D01* +X110951140Y-111958897D01* +X111053858Y-111899592D01* +X111053858Y-111899591D01* +X111053863Y-111899589D01* +X111137739Y-111815713D01* +X111161759Y-111774109D01* +X111197047Y-111712990D01* +X111197047Y-111712988D01* +X111197049Y-111712986D01* +X111212455Y-111655491D01* +X126164550Y-111655491D01* +X126164550Y-111774109D01* +X126175698Y-111815713D01* +X126195252Y-111888690D01* +X126254557Y-111991408D01* +X126254559Y-111991410D01* +X126254561Y-111991413D01* +X126338437Y-112075289D01* +X126338439Y-112075290D01* +X126338441Y-112075292D01* +X126441160Y-112134597D01* +X126441161Y-112134597D01* +X126441164Y-112134599D01* +X126555741Y-112165300D01* +X126555743Y-112165300D01* +X126674357Y-112165300D01* +X126674359Y-112165300D01* +X126788936Y-112134599D01* +X126788938Y-112134597D01* +X126788940Y-112134597D01* +X126891658Y-112075292D01* +X126891658Y-112075291D01* +X126891663Y-112075289D01* +X126975539Y-111991413D01* +X127003324Y-111943289D01* +X127034847Y-111888690D01* +X127034847Y-111888688D01* +X127034849Y-111888686D01* +X127065550Y-111774109D01* +X127065550Y-111655491D01* +X127034849Y-111540914D01* +X127034847Y-111540911D01* +X127034847Y-111540909D01* +X126975542Y-111438191D01* +X126975540Y-111438189D01* +X126975539Y-111438187D01* +X126891663Y-111354311D01* +X126891660Y-111354309D01* +X126891658Y-111354307D01* +X126863652Y-111338138D01* +X126788939Y-111295002D01* +X126788940Y-111295002D01* +X126775401Y-111291374D01* +X126674359Y-111264300D01* +X126555741Y-111264300D01* +X126485617Y-111283089D01* +X126441159Y-111295002D01* +X126338441Y-111354307D01* +X126254557Y-111438191D01* +X126195252Y-111540909D01* +X126195251Y-111540914D01* +X126164550Y-111655491D01* +X111212455Y-111655491D01* +X111227750Y-111598409D01* +X111227750Y-111479791D01* +X111197049Y-111365214D01* +X111197047Y-111365211D01* +X111197047Y-111365209D01* +X111137742Y-111262491D01* +X111137740Y-111262489D01* +X111137739Y-111262487D01* +X111134143Y-111258891D01* +X131691150Y-111258891D01* +X131691150Y-111377509D01* +X131699564Y-111408909D01* +X131721852Y-111492090D01* +X131781157Y-111594808D01* +X131781159Y-111594810D01* +X131781161Y-111594813D01* +X131865037Y-111678689D01* +X131865039Y-111678690D01* +X131865041Y-111678692D01* +X131967760Y-111737997D01* +X131967761Y-111737997D01* +X131967764Y-111737999D01* +X132082341Y-111768700D01* +X132082343Y-111768700D01* +X132200957Y-111768700D01* +X132200959Y-111768700D01* +X132315536Y-111737999D01* +X132315538Y-111737997D01* +X132315540Y-111737997D01* +X132418258Y-111678692D01* +X132418258Y-111678691D01* +X132418263Y-111678689D01* +X132502139Y-111594813D01* +X132543317Y-111523491D01* +X132561447Y-111492090D01* +X132561447Y-111492088D01* +X132561449Y-111492086D01* +X132592150Y-111377509D01* +X132592150Y-111258891D01* +X132561449Y-111144314D01* +X132561447Y-111144311D01* +X132561447Y-111144309D01* +X132502142Y-111041591D01* +X132502140Y-111041589D01* +X132502139Y-111041587D01* +X132418263Y-110957711D01* +X132418260Y-110957709D01* +X132418258Y-110957707D01* +X132315539Y-110898402D01* +X132315540Y-110898402D01* +X132302001Y-110894774D01* +X132200959Y-110867700D01* +X132082341Y-110867700D01* +X132012217Y-110886489D01* +X131967759Y-110898402D01* +X131865041Y-110957707D01* +X131781157Y-111041591D01* +X131721852Y-111144309D01* +X131712662Y-111178607D01* +X131691150Y-111258891D01* +X111134143Y-111258891D01* +X111053863Y-111178611D01* +X111053860Y-111178609D01* +X111053858Y-111178607D01* +X110951139Y-111119302D01* +X110951140Y-111119302D01* +X110937601Y-111115674D01* +X110836559Y-111088600D01* +X110717941Y-111088600D01* +X110647817Y-111107389D01* +X110603359Y-111119302D01* +X110500641Y-111178607D01* +X110416757Y-111262491D01* +X110357452Y-111365209D01* +X110340287Y-111429269D01* +X110326750Y-111479791D01* +X107270741Y-111479791D01* +X107251749Y-111408914D01* +X107251747Y-111408911D01* +X107251747Y-111408909D01* +X107192442Y-111306191D01* +X107192440Y-111306189D01* +X107192439Y-111306187D01* +X107108563Y-111222311D01* +X107108560Y-111222309D01* +X107108558Y-111222307D01* +X107005839Y-111163002D01* +X107005840Y-111163002D01* +X106992301Y-111159374D01* +X106891259Y-111132300D01* +X106772641Y-111132300D01* +X106702517Y-111151089D01* +X106658059Y-111163002D01* +X106555341Y-111222307D01* +X106471457Y-111306191D01* +X106412152Y-111408909D01* +X106412151Y-111408914D01* +X106381450Y-111523491D01* +X80833387Y-111523491D01* +X80830858Y-109021091D01* +X91646150Y-109021091D01* +X91646150Y-109139709D01* +X91655622Y-109175059D01* +X91676852Y-109254290D01* +X91736157Y-109357008D01* +X91736159Y-109357010D01* +X91736161Y-109357013D01* +X91820037Y-109440889D01* +X91820039Y-109440890D01* +X91820041Y-109440892D01* +X91922760Y-109500197D01* +X91922761Y-109500197D01* +X91922764Y-109500199D01* +X92037341Y-109530900D01* +X92037343Y-109530900D01* +X92155957Y-109530900D01* +X92155959Y-109530900D01* +X92175772Y-109525591D01* +X92903750Y-109525591D01* +X92903750Y-109644209D01* +X92911248Y-109672190D01* +X92934452Y-109758790D01* +X92993757Y-109861508D01* +X92993759Y-109861510D01* +X92993761Y-109861513D01* +X93077637Y-109945389D01* +X93077639Y-109945390D01* +X93077641Y-109945392D01* +X93180360Y-110004697D01* +X93180361Y-110004697D01* +X93180364Y-110004699D01* +X93294941Y-110035400D01* +X93294943Y-110035400D01* +X93413557Y-110035400D01* +X93413559Y-110035400D01* +X93528136Y-110004699D01* +X93528138Y-110004697D01* +X93528140Y-110004697D01* +X93630858Y-109945392D01* +X93630858Y-109945391D01* +X93630863Y-109945389D01* +X93714739Y-109861513D01* +X93727742Y-109838992D01* +X93774047Y-109758790D01* +X93774047Y-109758788D01* +X93774049Y-109758786D01* +X93804750Y-109644209D01* +X93804750Y-109525591D01* +X93781367Y-109438324D01* +X93781367Y-109438323D01* +X93776240Y-109419191D01* +X116381150Y-109419191D01* +X116381150Y-109537809D01* +X116408224Y-109638851D01* +X116411852Y-109652390D01* +X116471157Y-109755108D01* +X116471159Y-109755110D01* +X116471161Y-109755113D01* +X116555037Y-109838989D01* +X116555039Y-109838990D01* +X116555041Y-109838992D01* +X116657760Y-109898297D01* +X116657761Y-109898297D01* +X116657764Y-109898299D01* +X116772341Y-109929000D01* +X116772343Y-109929000D01* +X116890957Y-109929000D01* +X116890959Y-109929000D01* +X117005536Y-109898299D01* +X117005538Y-109898297D01* +X117005540Y-109898297D01* +X117108258Y-109838992D01* +X117108258Y-109838991D01* +X117108263Y-109838989D01* +X117192139Y-109755113D01* +X117240015Y-109672190D01* +X117251447Y-109652390D01* +X117251447Y-109652388D01* +X117251449Y-109652386D01* +X117282150Y-109537809D01* +X117282150Y-109419191D01* +X117251449Y-109304614D01* +X117251447Y-109304611D01* +X117251447Y-109304609D01* +X117192142Y-109201891D01* +X117192140Y-109201889D01* +X117192139Y-109201887D01* +X117108263Y-109118011D01* +X117108260Y-109118009D01* +X117108258Y-109118007D01* +X117005539Y-109058702D01* +X117005540Y-109058702D01* +X116967107Y-109048404D01* +X116890959Y-109028000D01* +X116772341Y-109028000D01* +X116702217Y-109046789D01* +X116657759Y-109058702D01* +X116555041Y-109118007D01* +X116471157Y-109201891D01* +X116411852Y-109304609D01* +X116397812Y-109357008D01* +X116381150Y-109419191D01* +X93776240Y-109419191D01* +X93774048Y-109411012D01* +X93774047Y-109411010D01* +X93714742Y-109308291D01* +X93714740Y-109308289D01* +X93714739Y-109308287D01* +X93630863Y-109224411D01* +X93630860Y-109224409D01* +X93630858Y-109224407D01* +X93528139Y-109165102D01* +X93528140Y-109165102D01* +X93514473Y-109161440D01* +X93413559Y-109134400D01* +X93294941Y-109134400D01* +X93224817Y-109153189D01* +X93180359Y-109165102D01* +X93077641Y-109224407D01* +X92993757Y-109308291D01* +X92934452Y-109411009D01* +X92926954Y-109438992D01* +X92903750Y-109525591D01* +X92175772Y-109525591D01* +X92270536Y-109500199D01* +X92270538Y-109500197D01* +X92270540Y-109500197D01* +X92373258Y-109440892D01* +X92373258Y-109440891D01* +X92373263Y-109440889D01* +X92457139Y-109357013D01* +X92476431Y-109323599D01* +X92516447Y-109254290D01* +X92516447Y-109254288D01* +X92516449Y-109254286D01* +X92547150Y-109139709D01* +X92547150Y-109021091D01* +X92516449Y-108906514D01* +X92516447Y-108906511D01* +X92516447Y-108906509D01* +X92457142Y-108803791D01* +X92457140Y-108803789D01* +X92457139Y-108803787D01* +X92373263Y-108719911D01* +X92373260Y-108719909D01* +X92373258Y-108719907D01* +X92270539Y-108660602D01* +X92270540Y-108660602D01* +X92257001Y-108656974D01* +X92155959Y-108629900D01* +X92037341Y-108629900D01* +X91967217Y-108648689D01* +X91922759Y-108660602D01* +X91820041Y-108719907D01* +X91736157Y-108803791D01* +X91676852Y-108906509D01* +X91672409Y-108923090D01* +X91646150Y-109021091D01* +X80830858Y-109021091D01* +X80830128Y-108298700D01* +X80829186Y-107366791D01* +X99339350Y-107366791D01* +X99339350Y-107485409D01* +X99354945Y-107543609D01* +X99370052Y-107599990D01* +X99429357Y-107702708D01* +X99429359Y-107702710D01* +X99429361Y-107702713D01* +X99513237Y-107786589D01* +X99513239Y-107786590D01* +X99513241Y-107786592D01* +X99615960Y-107845897D01* +X99615961Y-107845897D01* +X99615964Y-107845899D01* +X99730541Y-107876600D01* +X99730543Y-107876600D01* +X99849157Y-107876600D01* +X99849159Y-107876600D01* +X99963736Y-107845899D01* +X99963738Y-107845897D01* +X99963740Y-107845897D01* +X100066458Y-107786592D01* +X100066458Y-107786591D01* +X100066463Y-107786589D01* +X100150339Y-107702713D01* +X100167779Y-107672507D01* +X100209647Y-107599990D01* +X100209647Y-107599988D01* +X100209649Y-107599986D01* +X100240350Y-107485409D01* +X100240350Y-107366791D01* +X100209649Y-107252214D01* +X100209647Y-107252211D01* +X100209647Y-107252209D01* +X100150342Y-107149491D01* +X100150340Y-107149489D01* +X100150339Y-107149487D01* +X100066463Y-107065611D01* +X100066460Y-107065609D01* +X100066458Y-107065607D01* +X99963739Y-107006302D01* +X99963740Y-107006302D01* +X99950201Y-107002674D01* +X99849159Y-106975600D01* +X99730541Y-106975600D01* +X99660417Y-106994389D01* +X99615959Y-107006302D01* +X99513241Y-107065607D01* +X99429357Y-107149491D01* +X99370052Y-107252209D01* +X99366089Y-107267000D01* +X99339350Y-107366791D01* +X80829186Y-107366791D01* +X80829180Y-107360402D01* +X80828085Y-106277391D01* +X105030450Y-106277391D01* +X105030450Y-106396009D01* +X105056975Y-106495000D01* +X105061152Y-106510590D01* +X105120457Y-106613308D01* +X105120459Y-106613310D01* +X105120461Y-106613313D01* +X105204337Y-106697189D01* +X105204339Y-106697190D01* +X105204341Y-106697192D01* +X105307060Y-106756497D01* +X105307061Y-106756497D01* +X105307064Y-106756499D01* +X105421641Y-106787200D01* +X105421643Y-106787200D01* +X105540257Y-106787200D01* +X105540259Y-106787200D01* +X105654836Y-106756499D01* +X105654838Y-106756497D01* +X105654840Y-106756497D01* +X105757558Y-106697192D01* +X105757558Y-106697191D01* +X105757563Y-106697189D01* +X105841439Y-106613313D01* +X105900749Y-106510586D01* +X105931450Y-106396009D01* +X105931450Y-106277391D01* +X105900749Y-106162814D01* +X105900747Y-106162811D01* +X105900747Y-106162809D01* +X105841442Y-106060091D01* +X105841440Y-106060089D01* +X105841439Y-106060087D01* +X105766543Y-105985191D01* +X112741150Y-105985191D01* +X112741150Y-106103809D01* +X112767781Y-106203195D01* +X112771852Y-106218390D01* +X112831157Y-106321108D01* +X112831159Y-106321110D01* +X112831161Y-106321113D01* +X112915037Y-106404989D01* +X112915039Y-106404990D01* +X112915041Y-106404992D01* +X113017760Y-106464297D01* +X113017761Y-106464297D01* +X113017764Y-106464299D01* +X113132341Y-106495000D01* +X113132343Y-106495000D01* +X113250957Y-106495000D01* +X113250959Y-106495000D01* +X113365536Y-106464299D01* +X113365538Y-106464297D01* +X113365540Y-106464297D01* +X113468258Y-106404992D01* +X113468258Y-106404991D01* +X113468263Y-106404989D01* +X113552139Y-106321113D01* +X113611449Y-106218386D01* +X113642150Y-106103809D01* +X113642150Y-105985191D01* +X113611449Y-105870614D01* +X113611447Y-105870611D01* +X113611447Y-105870609D01* +X113552142Y-105767891D01* +X113552140Y-105767889D01* +X113552139Y-105767887D01* +X113468263Y-105684011D01* +X113468260Y-105684009D01* +X113468258Y-105684007D01* +X113365539Y-105624702D01* +X113365540Y-105624702D01* +X113352001Y-105621074D01* +X113250959Y-105594000D01* +X113132341Y-105594000D01* +X113062217Y-105612789D01* +X113017759Y-105624702D01* +X112915041Y-105684007D01* +X112831157Y-105767891D01* +X112771852Y-105870609D01* +X112759448Y-105916901D01* +X112741150Y-105985191D01* +X105766543Y-105985191D01* +X105757563Y-105976211D01* +X105757560Y-105976209D01* +X105757558Y-105976207D01* +X105654839Y-105916902D01* +X105654840Y-105916902D01* +X105641301Y-105913274D01* +X105540259Y-105886200D01* +X105421641Y-105886200D01* +X105351517Y-105904989D01* +X105307059Y-105916902D01* +X105204341Y-105976207D01* +X105120457Y-106060091D01* +X105061152Y-106162809D01* +X105061151Y-106162814D01* +X105030450Y-106277391D01* +X80828085Y-106277391D01* +X80828079Y-106271002D01* +X80827134Y-105336491D01* +X115292950Y-105336491D01* +X115292950Y-105455109D01* +X115306848Y-105506977D01* +X115323652Y-105569690D01* +X115382957Y-105672408D01* +X115382959Y-105672410D01* +X115382961Y-105672413D01* +X115466837Y-105756289D01* +X115466839Y-105756290D01* +X115466841Y-105756292D01* +X115569560Y-105815597D01* +X115569561Y-105815597D01* +X115569564Y-105815599D01* +X115684141Y-105846300D01* +X115684143Y-105846300D01* +X115802757Y-105846300D01* +X115802759Y-105846300D01* +X115917336Y-105815599D01* +X115917338Y-105815597D01* +X115917340Y-105815597D01* +X116020058Y-105756292D01* +X116020058Y-105756291D01* +X116020063Y-105756289D01* +X116103939Y-105672413D01* +X116161278Y-105573100D01* +X116163247Y-105569690D01* +X116163247Y-105569688D01* +X116163249Y-105569686D01* +X116193950Y-105455109D01* +X116193950Y-105336491D01* +X116163249Y-105221914D01* +X116163247Y-105221911D01* +X116163247Y-105221909D01* +X116103942Y-105119191D01* +X116103940Y-105119189D01* +X116103939Y-105119187D01* +X116020063Y-105035311D01* +X116020060Y-105035309D01* +X116020058Y-105035307D01* +X115917339Y-104976002D01* +X115917340Y-104976002D01* +X115903801Y-104972374D01* +X115802759Y-104945300D01* +X115684141Y-104945300D01* +X115614017Y-104964089D01* +X115569559Y-104976002D01* +X115466841Y-105035307D01* +X115382957Y-105119191D01* +X115323652Y-105221909D01* +X115323651Y-105221914D01* +X115292950Y-105336491D01* +X80827134Y-105336491D01* +X80827128Y-105330102D01* +X80825783Y-104000191D01* +X90646250Y-104000191D01* +X90646250Y-104118809D01* +X90670613Y-104209732D01* +X90676952Y-104233390D01* +X90736257Y-104336108D01* +X90736259Y-104336110D01* +X90736261Y-104336113D01* +X90820137Y-104419989D01* +X90820139Y-104419990D01* +X90820141Y-104419992D01* +X90922860Y-104479297D01* +X90922861Y-104479297D01* +X90922864Y-104479299D01* +X91037441Y-104510000D01* +X91037443Y-104510000D01* +X91156057Y-104510000D01* +X91156059Y-104510000D01* +X91270636Y-104479299D01* +X91270638Y-104479297D01* +X91270640Y-104479297D01* +X91373358Y-104419992D01* +X91373358Y-104419991D01* +X91373363Y-104419989D01* +X91457239Y-104336113D01* +X91461986Y-104327891D01* +X91516547Y-104233390D01* +X91516547Y-104233388D01* +X91516549Y-104233386D01* +X91547250Y-104118809D01* +X91547250Y-104000191D01* +X91516549Y-103885614D01* +X91516547Y-103885611D01* +X91516547Y-103885609D01* +X91457242Y-103782891D01* +X91457240Y-103782889D01* +X91457239Y-103782887D01* +X91373363Y-103699011D01* +X91373360Y-103699009D01* +X91373358Y-103699007D01* +X91270639Y-103639702D01* +X91270640Y-103639702D01* +X91257101Y-103636074D01* +X91156059Y-103609000D01* +X91037441Y-103609000D01* +X90979274Y-103624586D01* +X90922859Y-103639702D01* +X90820141Y-103699007D01* +X90736257Y-103782891D01* +X90676952Y-103885609D01* +X90660639Y-103946489D01* +X90646250Y-104000191D01* +X80825783Y-104000191D01* +X80825777Y-103993802D01* +X80825168Y-103391391D01* +X99022950Y-103391391D01* +X99022950Y-103510009D01* +X99044089Y-103588900D01* +X99053652Y-103624590D01* +X99112957Y-103727308D01* +X99112959Y-103727310D01* +X99112961Y-103727313D01* +X99196837Y-103811189D01* +X99196839Y-103811190D01* +X99196841Y-103811192D01* +X99299560Y-103870497D01* +X99299561Y-103870497D01* +X99299564Y-103870499D01* +X99414141Y-103901200D01* +X99414143Y-103901200D01* +X99532757Y-103901200D01* +X99532759Y-103901200D01* +X99647336Y-103870499D01* +X99647338Y-103870497D01* +X99647340Y-103870497D01* +X99750058Y-103811192D01* +X99750058Y-103811191D01* +X99750063Y-103811189D01* +X99833939Y-103727313D01* +X99861884Y-103678911D01* +X99893247Y-103624590D01* +X99893247Y-103624588D01* +X99893249Y-103624586D01* +X99923950Y-103510009D01* +X99923950Y-103391391D01* +X99893249Y-103276814D01* +X99893247Y-103276811D01* +X99893247Y-103276809D01* +X99833942Y-103174091D01* +X99833940Y-103174089D01* +X99833939Y-103174087D01* +X99750063Y-103090211D01* +X99750060Y-103090209D01* +X99750058Y-103090207D01* +X99687330Y-103053991D01* +X113451350Y-103053991D01* +X113451350Y-103172609D01* +X113465524Y-103225507D01* +X113482052Y-103287190D01* +X113541357Y-103389908D01* +X113541359Y-103389910D01* +X113541361Y-103389913D01* +X113625237Y-103473789D01* +X113625239Y-103473790D01* +X113625241Y-103473792D01* +X113727960Y-103533097D01* +X113727961Y-103533097D01* +X113727964Y-103533099D01* +X113842541Y-103563800D01* +X113842543Y-103563800D01* +X113961157Y-103563800D01* +X113961159Y-103563800D01* +X114075736Y-103533099D01* +X114075738Y-103533097D01* +X114075740Y-103533097D01* +X114086835Y-103526691D01* +X132979050Y-103526691D01* +X132979050Y-103645309D01* +X133001022Y-103727308D01* +X133009752Y-103759890D01* +X133069057Y-103862608D01* +X133069059Y-103862610D01* +X133069061Y-103862613D01* +X133152937Y-103946489D01* +X133152939Y-103946490D01* +X133152941Y-103946492D01* +X133255660Y-104005797D01* +X133255661Y-104005797D01* +X133255664Y-104005799D01* +X133370241Y-104036500D01* +X133370243Y-104036500D01* +X133488857Y-104036500D01* +X133488859Y-104036500D01* +X133603436Y-104005799D01* +X133603438Y-104005797D01* +X133603440Y-104005797D01* +X133706158Y-103946492D01* +X133706158Y-103946491D01* +X133706163Y-103946489D01* +X133790039Y-103862613D01* +X133836067Y-103782891D01* +X133849347Y-103759890D01* +X133849347Y-103759888D01* +X133849349Y-103759886D01* +X133880050Y-103645309D01* +X133880050Y-103526691D01* +X133849349Y-103412114D01* +X133849347Y-103412111D01* +X133849347Y-103412109D01* +X133790042Y-103309391D01* +X133790040Y-103309389D01* +X133790039Y-103309387D01* +X133706163Y-103225511D01* +X133706160Y-103225509D01* +X133706158Y-103225507D01* +X133603439Y-103166202D01* +X133603440Y-103166202D01* +X133589901Y-103162574D01* +X133488859Y-103135500D01* +X133370241Y-103135500D01* +X133300117Y-103154289D01* +X133255659Y-103166202D01* +X133152941Y-103225507D01* +X133069057Y-103309391D01* +X133009752Y-103412109D01* +X132999546Y-103450198D01* +X132979050Y-103526691D01* +X114086835Y-103526691D01* +X114178458Y-103473792D01* +X114178458Y-103473791D01* +X114178463Y-103473789D01* +X114262339Y-103389913D01* +X114262342Y-103389908D01* +X114321647Y-103287190D01* +X114321647Y-103287188D01* +X114321649Y-103287186D01* +X114352350Y-103172609D01* +X114352350Y-103053991D01* +X114321649Y-102939414D01* +X114321647Y-102939411D01* +X114321647Y-102939409D01* +X114262342Y-102836691D01* +X114262340Y-102836689D01* +X114262339Y-102836687D01* +X114178463Y-102752811D01* +X114178460Y-102752809D01* +X114178458Y-102752807D01* +X114075739Y-102693502D01* +X114075740Y-102693502D01* +X114062201Y-102689874D01* +X113961159Y-102662800D01* +X113842541Y-102662800D01* +X113772417Y-102681589D01* +X113727959Y-102693502D01* +X113625241Y-102752807D01* +X113541357Y-102836691D01* +X113482052Y-102939409D01* +X113482051Y-102939414D01* +X113451350Y-103053991D01* +X99687330Y-103053991D01* +X99647339Y-103030902D01* +X99647340Y-103030902D01* +X99633801Y-103027274D01* +X99532759Y-103000200D01* +X99414141Y-103000200D01* +X99344017Y-103018989D01* +X99299559Y-103030902D01* +X99196841Y-103090207D01* +X99112957Y-103174091D01* +X99053652Y-103276809D01* +X99044923Y-103309387D01* +X99022950Y-103391391D01* +X80825168Y-103391391D01* +X80825162Y-103385002D01* +X80824028Y-102263791D01* +X98675550Y-102263791D01* +X98675550Y-102382409D01* +X98690035Y-102436467D01* +X98706252Y-102496990D01* +X98765557Y-102599708D01* +X98765559Y-102599710D01* +X98765561Y-102599713D01* +X98849437Y-102683589D01* +X98849439Y-102683590D01* +X98849441Y-102683592D01* +X98952160Y-102742897D01* +X98952161Y-102742897D01* +X98952164Y-102742899D01* +X99066741Y-102773600D01* +X99066743Y-102773600D01* +X99185357Y-102773600D01* +X99185359Y-102773600D01* +X99299936Y-102742899D01* +X99299938Y-102742897D01* +X99299940Y-102742897D01* +X99402658Y-102683592D01* +X99402658Y-102683591D01* +X99402663Y-102683589D01* +X99486539Y-102599713D01* +X99545849Y-102496986D01* +X99576550Y-102382409D01* +X99576550Y-102263791D01* +X99545849Y-102149214D01* +X99545847Y-102149211D01* +X99545847Y-102149209D01* +X99486542Y-102046491D01* +X99486540Y-102046489D01* +X99486539Y-102046487D01* +X99402663Y-101962611D01* +X99402660Y-101962609D01* +X99402658Y-101962607D01* +X99299939Y-101903302D01* +X99299940Y-101903302D01* +X99286401Y-101899674D01* +X99185359Y-101872600D01* +X99066741Y-101872600D01* +X98996617Y-101891389D01* +X98952159Y-101903302D01* +X98849441Y-101962607D01* +X98765557Y-102046491D01* +X98706252Y-102149209D01* +X98706251Y-102149214D01* +X98675550Y-102263791D01* +X80824028Y-102263791D01* +X80824022Y-102257402D01* +X80822910Y-101158091D01* +X97923350Y-101158091D01* +X97923350Y-101276709D01* +X97950424Y-101377751D01* +X97954052Y-101391290D01* +X98013357Y-101494008D01* +X98013359Y-101494010D01* +X98013361Y-101494013D01* +X98097237Y-101577889D01* +X98097239Y-101577890D01* +X98097241Y-101577892D01* +X98199960Y-101637197D01* +X98199961Y-101637197D01* +X98199964Y-101637199D01* +X98314541Y-101667900D01* +X98314543Y-101667900D01* +X98433157Y-101667900D01* +X98433159Y-101667900D01* +X98547736Y-101637199D01* +X98547738Y-101637197D01* +X98547740Y-101637197D01* +X98650458Y-101577892D01* +X98650458Y-101577891D01* +X98650463Y-101577889D01* +X98734339Y-101494013D01* +X98793649Y-101391286D01* +X98824350Y-101276709D01* +X98824350Y-101158091D01* +X98793649Y-101043514D01* +X98793647Y-101043511D01* +X98793647Y-101043509D01* +X98734342Y-100940791D01* +X98734340Y-100940789D01* +X98734339Y-100940787D01* +X98650463Y-100856911D01* +X98650460Y-100856909D01* +X98650458Y-100856907D01* +X98547739Y-100797602D01* +X98547740Y-100797602D01* +X98534201Y-100793974D01* +X98433159Y-100766900D01* +X98314541Y-100766900D01* +X98244417Y-100785689D01* +X98199959Y-100797602D01* +X98097241Y-100856907D01* +X98013357Y-100940791D01* +X97954052Y-101043509D01* +X97954051Y-101043514D01* +X97923350Y-101158091D01* +X80822910Y-101158091D01* +X80822904Y-101151702D01* +X80821898Y-100156391D01* +X102139450Y-100156391D01* +X102139450Y-100275009D01* +X102166524Y-100376051D01* +X102170152Y-100389590D01* +X102229457Y-100492308D01* +X102229459Y-100492310D01* +X102229461Y-100492313D01* +X102313337Y-100576189D01* +X102313339Y-100576190D01* +X102313341Y-100576192D01* +X102416060Y-100635497D01* +X102416061Y-100635497D01* +X102416064Y-100635499D01* +X102530641Y-100666200D01* +X102530643Y-100666200D01* +X102649257Y-100666200D01* +X102649259Y-100666200D01* +X102763836Y-100635499D01* +X102763838Y-100635497D01* +X102763840Y-100635497D01* +X102866558Y-100576192D01* +X102866558Y-100576191D01* +X102866563Y-100576189D01* +X102950439Y-100492313D01* +X103009749Y-100389586D01* +X103040450Y-100275009D01* +X103040450Y-100156391D01* +X103009749Y-100041814D01* +X103009747Y-100041811D01* +X103009747Y-100041809D01* +X102950442Y-99939091D01* +X102950440Y-99939089D01* +X102950439Y-99939087D01* +X102866563Y-99855211D01* +X102866560Y-99855209D01* +X102866558Y-99855207D01* +X102763839Y-99795902D01* +X102763840Y-99795902D01* +X102750301Y-99792274D01* +X102649259Y-99765200D01* +X102530641Y-99765200D01* +X102460517Y-99783989D01* +X102416059Y-99795902D01* +X102313341Y-99855207D01* +X102229457Y-99939091D01* +X102170152Y-100041809D01* +X102170151Y-100041814D01* +X102139450Y-100156391D01* +X80821898Y-100156391D01* +X80821892Y-100150002D01* +X80820487Y-98760691D01* +X134041250Y-98760691D01* +X134041250Y-98879309D01* +X134049447Y-98909900D01* +X134071952Y-98993890D01* +X134131257Y-99096608D01* +X134131259Y-99096610D01* +X134131261Y-99096613D01* +X134215137Y-99180489D01* +X134215139Y-99180490D01* +X134215141Y-99180492D01* +X134317860Y-99239797D01* +X134317861Y-99239797D01* +X134317864Y-99239799D01* +X134432441Y-99270500D01* +X134432443Y-99270500D01* +X134551057Y-99270500D01* +X134551059Y-99270500D01* +X134665636Y-99239799D01* +X134665638Y-99239797D01* +X134665640Y-99239797D01* +X134768358Y-99180492D01* +X134768358Y-99180491D01* +X134768363Y-99180489D01* +X134852239Y-99096613D01* +X134911549Y-98993886D01* +X134942250Y-98879309D01* +X134942250Y-98760691D01* +X134911549Y-98646114D01* +X134911547Y-98646111D01* +X134911547Y-98646109D01* +X134852242Y-98543391D01* +X134852240Y-98543389D01* +X134852239Y-98543387D01* +X134819043Y-98510191D01* +X141292250Y-98510191D01* +X141292250Y-98628809D01* +X141293450Y-98633286D01* +X141322952Y-98743390D01* +X141382257Y-98846108D01* +X141382259Y-98846110D01* +X141382261Y-98846113D01* +X141466137Y-98929989D01* +X141466139Y-98929990D01* +X141466141Y-98929992D01* +X141568860Y-98989297D01* +X141568861Y-98989297D01* +X141568864Y-98989299D01* +X141683441Y-99020000D01* +X141683443Y-99020000D01* +X141802057Y-99020000D01* +X141802059Y-99020000D01* +X141916636Y-98989299D01* +X141916638Y-98989297D01* +X141916640Y-98989297D01* +X142019358Y-98929992D01* +X142019358Y-98929991D01* +X142019363Y-98929989D01* +X142103239Y-98846113D01* +X142118380Y-98819889D01* +X142162547Y-98743390D01* +X142162547Y-98743388D01* +X142162549Y-98743386D01* +X142193250Y-98628809D01* +X142193250Y-98510191D01* +X142162549Y-98395614D01* +X142162547Y-98395611D01* +X142162547Y-98395609D01* +X142103242Y-98292891D01* +X142103240Y-98292889D01* +X142103239Y-98292887D01* +X142019363Y-98209011D01* +X142019360Y-98209009D01* +X142019358Y-98209007D01* +X141916639Y-98149702D01* +X141916640Y-98149702D01* +X141885656Y-98141400D01* +X141802059Y-98119000D01* +X141683441Y-98119000D01* +X141613317Y-98137789D01* +X141568859Y-98149702D01* +X141466141Y-98209007D01* +X141382257Y-98292891D01* +X141322952Y-98395609D01* +X141312880Y-98433199D01* +X141292250Y-98510191D01* +X134819043Y-98510191D01* +X134768363Y-98459511D01* +X134751597Y-98449831D01* +X134751594Y-98449828D01* +X134665639Y-98400202D01* +X134665640Y-98400202D01* +X134648517Y-98395614D01* +X134551059Y-98369500D01* +X134432441Y-98369500D01* +X134362317Y-98388289D01* +X134317859Y-98400202D01* +X134215141Y-98459507D01* +X134131257Y-98543391D01* +X134071952Y-98646109D01* +X134071951Y-98646114D01* +X134041250Y-98760691D01* +X80820487Y-98760691D01* +X80820481Y-98754302D01* +X80819407Y-97692391D01* +X121552450Y-97692391D01* +X121552450Y-97811009D01* +X121560087Y-97839509D01* +X121583152Y-97925590D01* +X121642457Y-98028308D01* +X121642459Y-98028310D01* +X121642461Y-98028313D01* +X121726337Y-98112189D01* +X121726339Y-98112190D01* +X121726341Y-98112192D01* +X121829060Y-98171497D01* +X121829061Y-98171497D01* +X121829064Y-98171499D01* +X121943641Y-98202200D01* +X121943643Y-98202200D01* +X122062257Y-98202200D01* +X122062259Y-98202200D01* +X122176836Y-98171499D01* +X122176838Y-98171497D01* +X122176840Y-98171497D01* +X122279558Y-98112192D01* +X122279558Y-98112191D01* +X122279563Y-98112189D01* +X122363439Y-98028313D01* +X122363442Y-98028308D01* +X122368186Y-98020091D01* +X126214050Y-98020091D01* +X126214050Y-98138709D01* +X126241124Y-98239751D01* +X126244752Y-98253290D01* +X126304057Y-98356008D01* +X126304059Y-98356010D01* +X126304061Y-98356013D01* +X126387937Y-98439889D01* +X126387939Y-98439890D01* +X126387941Y-98439892D01* +X126490660Y-98499197D01* +X126490661Y-98499197D01* +X126490664Y-98499199D01* +X126605241Y-98529900D01* +X126605243Y-98529900D01* +X126723857Y-98529900D01* +X126723859Y-98529900D01* +X126838436Y-98499199D01* +X126838438Y-98499197D01* +X126838440Y-98499197D01* +X126941158Y-98439892D01* +X126941158Y-98439891D01* +X126941163Y-98439889D01* +X127025039Y-98356013D01* +X127025042Y-98356008D01* +X127084347Y-98253290D01* +X127084347Y-98253288D01* +X127084349Y-98253286D01* +X127115050Y-98138709D01* +X127115050Y-98020091D01* +X127097365Y-97954091D01* +X134781050Y-97954091D01* +X134781050Y-98072709D01* +X134791629Y-98112189D01* +X134811752Y-98187290D01* +X134871057Y-98290008D01* +X134871059Y-98290010D01* +X134871061Y-98290013D01* +X134954937Y-98373889D01* +X134971702Y-98383568D01* +X134971704Y-98383570D01* +X135057660Y-98433197D01* +X135057661Y-98433197D01* +X135057664Y-98433199D01* +X135172241Y-98463900D01* +X135172243Y-98463900D01* +X135290857Y-98463900D01* +X135290859Y-98463900D01* +X135405436Y-98433199D01* +X135508163Y-98373889D01* +X135592039Y-98290013D01* +X135594637Y-98285514D01* +X135651347Y-98187290D01* +X135651347Y-98187288D01* +X135651349Y-98187286D01* +X135682050Y-98072709D01* +X135682050Y-97954091D01* +X135651349Y-97839514D01* +X135651347Y-97839511D01* +X135651347Y-97839509D01* +X135592042Y-97736791D01* +X135592040Y-97736789D01* +X135592039Y-97736787D01* +X135508163Y-97652911D01* +X135508160Y-97652909D01* +X135508158Y-97652907D01* +X135405439Y-97593602D01* +X135405440Y-97593602D01* +X135346518Y-97577814D01* +X135290859Y-97562900D01* +X135172241Y-97562900D01* +X135116582Y-97577814D01* +X135057659Y-97593602D01* +X134954941Y-97652907D01* +X134871057Y-97736791D01* +X134811752Y-97839509D01* +X134811751Y-97839514D01* +X134781050Y-97954091D01* +X127097365Y-97954091D01* +X127084349Y-97905514D01* +X127084347Y-97905511D01* +X127084347Y-97905509D01* +X127025042Y-97802791D01* +X127025040Y-97802789D01* +X127025039Y-97802787D01* +X126941163Y-97718911D01* +X126941160Y-97718909D01* +X126941158Y-97718907D01* +X126838439Y-97659602D01* +X126838440Y-97659602D01* +X126813454Y-97652907D01* +X126723859Y-97628900D01* +X126605241Y-97628900D01* +X126563495Y-97640086D01* +X126490659Y-97659602D01* +X126387941Y-97718907D01* +X126304057Y-97802791D01* +X126244752Y-97905509D01* +X126231735Y-97954091D01* +X126214050Y-98020091D01* +X122368186Y-98020091D01* +X122400512Y-97964102D01* +X122400512Y-97964101D01* +X122406291Y-97954091D01* +X122422749Y-97925586D01* +X122453450Y-97811009D01* +X122453450Y-97692391D01* +X122422749Y-97577814D01* +X122422747Y-97577811D01* +X122422747Y-97577809D01* +X122363442Y-97475091D01* +X122363440Y-97475089D01* +X122363439Y-97475087D01* +X122279563Y-97391211D01* +X122279560Y-97391209D01* +X122279558Y-97391207D01* +X122176839Y-97331902D01* +X122176840Y-97331902D01* +X122163301Y-97328274D01* +X122062259Y-97301200D01* +X121943641Y-97301200D01* +X121873517Y-97319989D01* +X121829059Y-97331902D01* +X121726341Y-97391207D01* +X121642457Y-97475091D01* +X121583152Y-97577809D01* +X121571794Y-97620197D01* +X121552450Y-97692391D01* +X80819407Y-97692391D01* +X80818886Y-97176991D01* +X106053250Y-97176991D01* +X106053250Y-97295609D01* +X106062975Y-97331902D01* +X106083952Y-97410190D01* +X106143257Y-97512908D01* +X106143259Y-97512910D01* +X106143261Y-97512913D01* +X106227137Y-97596789D01* +X106227139Y-97596790D01* +X106227141Y-97596792D01* +X106329860Y-97656097D01* +X106329861Y-97656097D01* +X106329864Y-97656099D01* +X106444441Y-97686800D01* +X106444443Y-97686800D01* +X106563057Y-97686800D01* +X106563059Y-97686800D01* +X106677636Y-97656099D01* +X106677638Y-97656097D01* +X106677640Y-97656097D01* +X106774501Y-97600174D01* +X106774509Y-97600168D01* +X106780363Y-97596789D01* +X106864239Y-97512913D01* +X106900389Y-97450300D01* +X106923547Y-97410190D01* +X106923547Y-97410188D01* +X106923549Y-97410186D01* +X106954250Y-97295609D01* +X106954250Y-97176991D01* +X106923549Y-97062414D01* +X106923547Y-97062411D01* +X106923547Y-97062409D01* +X106864242Y-96959691D01* +X106864240Y-96959689D01* +X106864239Y-96959687D01* +X106780363Y-96875811D01* +X106780360Y-96875809D01* +X106780358Y-96875807D01* +X106677639Y-96816502D01* +X106677640Y-96816502D01* +X106664101Y-96812874D01* +X106563059Y-96785800D01* +X106444441Y-96785800D01* +X106374317Y-96804589D01* +X106329859Y-96816502D01* +X106227141Y-96875807D01* +X106143257Y-96959691D01* +X106083952Y-97062409D01* +X106066787Y-97126469D01* +X106053250Y-97176991D01* +X80818886Y-97176991D01* +X80818880Y-97170602D01* +X80818018Y-96317891D01* +X108223850Y-96317891D01* +X108223850Y-96436509D01* +X108239017Y-96493111D01* +X108254552Y-96551090D01* +X108313857Y-96653808D01* +X108313859Y-96653810D01* +X108313861Y-96653813D01* +X108397737Y-96737689D01* +X108397739Y-96737690D01* +X108397741Y-96737692D01* +X108500460Y-96796997D01* +X108500461Y-96796997D01* +X108500464Y-96796999D01* +X108615041Y-96827700D01* +X108615043Y-96827700D01* +X108733657Y-96827700D01* +X108733659Y-96827700D01* +X108848236Y-96796999D01* +X108848238Y-96796997D01* +X108848240Y-96796997D01* +X108950958Y-96737692D01* +X108950958Y-96737691D01* +X108950963Y-96737689D01* +X109034839Y-96653813D01* +X109094149Y-96551086D01* +X109110761Y-96489091D01* +X122932050Y-96489091D01* +X122932050Y-96607709D01* +X122951344Y-96679714D01* +X122962752Y-96722290D01* +X123022057Y-96825008D01* +X123022059Y-96825010D01* +X123022061Y-96825013D01* +X123105937Y-96908889D01* +X123105939Y-96908890D01* +X123105941Y-96908892D01* +X123208660Y-96968197D01* +X123208661Y-96968197D01* +X123208664Y-96968199D01* +X123323241Y-96998900D01* +X123323243Y-96998900D01* +X123441857Y-96998900D01* +X123441859Y-96998900D01* +X123556436Y-96968199D01* +X123556438Y-96968197D01* +X123556440Y-96968197D01* +X123659158Y-96908892D01* +X123659158Y-96908891D01* +X123659163Y-96908889D01* +X123743039Y-96825013D01* +X123747953Y-96816502D01* +X123760777Y-96794291D01* +X126870850Y-96794291D01* +X126870850Y-96912909D01* +X126885665Y-96968199D01* +X126901552Y-97027490D01* +X126960857Y-97130208D01* +X126960859Y-97130210D01* +X126960861Y-97130213D01* +X127044737Y-97214089D01* +X127044739Y-97214090D01* +X127044741Y-97214092D01* +X127147460Y-97273397D01* +X127147461Y-97273397D01* +X127147464Y-97273399D01* +X127262041Y-97304100D01* +X127262043Y-97304100D01* +X127380657Y-97304100D01* +X127380659Y-97304100D01* +X127495236Y-97273399D01* +X127495238Y-97273397D01* +X127495240Y-97273397D01* +X127597958Y-97214092D01* +X127597958Y-97214091D01* +X127597963Y-97214089D01* +X127670961Y-97141091D01* +X133789150Y-97141091D01* +X133789150Y-97259709D01* +X133800268Y-97301200D01* +X133819852Y-97374290D01* +X133879157Y-97477008D01* +X133879159Y-97477010D01* +X133879161Y-97477013D01* +X133963037Y-97560889D01* +X133963039Y-97560890D01* +X133963041Y-97560892D01* +X134065760Y-97620197D01* +X134065761Y-97620197D01* +X134065764Y-97620199D01* +X134180341Y-97650900D01* +X134180343Y-97650900D01* +X134298957Y-97650900D01* +X134298959Y-97650900D01* +X134413536Y-97620199D01* +X134413538Y-97620197D01* +X134413540Y-97620197D01* +X134516258Y-97560892D01* +X134516258Y-97560891D01* +X134516263Y-97560889D01* +X134600139Y-97477013D01* +X134615562Y-97450300D01* +X134640625Y-97406891D01* +X137685050Y-97406891D01* +X137685050Y-97525509D01* +X137694530Y-97560889D01* +X137715752Y-97640090D01* +X137775057Y-97742808D01* +X137775059Y-97742810D01* +X137775061Y-97742813D01* +X137858937Y-97826689D01* +X137858939Y-97826690D01* +X137858941Y-97826692D01* +X137961660Y-97885997D01* +X137961661Y-97885997D01* +X137961664Y-97885999D01* +X138076241Y-97916700D01* +X138076243Y-97916700D01* +X138194857Y-97916700D01* +X138194859Y-97916700D01* +X138309436Y-97885999D01* +X138309438Y-97885997D01* +X138309440Y-97885997D01* +X138412158Y-97826692D01* +X138412158Y-97826691D01* +X138412163Y-97826689D01* +X138496039Y-97742813D01* +X138525150Y-97692392D01* +X138555347Y-97640090D01* +X138555347Y-97640088D01* +X138555349Y-97640086D01* +X138586050Y-97525509D01* +X138586050Y-97406891D01* +X138555349Y-97292314D01* +X138555347Y-97292311D01* +X138555347Y-97292309D01* +X138496042Y-97189591D01* +X138496040Y-97189589D01* +X138496039Y-97189587D01* +X138412163Y-97105711D01* +X138412160Y-97105709D01* +X138412158Y-97105707D01* +X138309439Y-97046402D01* +X138309440Y-97046402D01* +X138295901Y-97042774D01* +X138194859Y-97015700D01* +X138076241Y-97015700D01* +X138006117Y-97034489D01* +X137961659Y-97046402D01* +X137858941Y-97105707D01* +X137775057Y-97189591D01* +X137715752Y-97292309D01* +X137714868Y-97295609D01* +X137685050Y-97406891D01* +X134640625Y-97406891D01* +X134659446Y-97374292D01* +X134659446Y-97374290D01* +X134659449Y-97374286D01* +X134690150Y-97259709D01* +X134690150Y-97141091D01* +X134659449Y-97026514D01* +X134659447Y-97026511D01* +X134659447Y-97026509D01* +X134600142Y-96923791D01* +X134600140Y-96923789D01* +X134600139Y-96923787D01* +X134516263Y-96839911D01* +X134516260Y-96839909D01* +X134516258Y-96839907D01* +X134413539Y-96780602D01* +X134413540Y-96780602D01* +X134400001Y-96776974D01* +X134298959Y-96749900D01* +X134180341Y-96749900D01* +X134110217Y-96768689D01* +X134065759Y-96780602D01* +X133963041Y-96839907D01* +X133879157Y-96923791D01* +X133819852Y-97026509D01* +X133804153Y-97085099D01* +X133789150Y-97141091D01* +X127670961Y-97141091D01* +X127681839Y-97130213D01* +X127720986Y-97062409D01* +X127741147Y-97027490D01* +X127741147Y-97027488D01* +X127741149Y-97027486D01* +X127771850Y-96912909D01* +X127771850Y-96794291D01* +X127741149Y-96679714D01* +X127741147Y-96679711D01* +X127741147Y-96679709D01* +X127681842Y-96576991D01* +X127681840Y-96576989D01* +X127681839Y-96576987D01* +X127605243Y-96500391D01* +X143960450Y-96500391D01* +X143960450Y-96619009D01* +X143969776Y-96653813D01* +X143991152Y-96733590D01* +X144050457Y-96836308D01* +X144050459Y-96836310D01* +X144050461Y-96836313D01* +X144134337Y-96920189D01* +X144134339Y-96920190D01* +X144134341Y-96920192D01* +X144237060Y-96979497D01* +X144237061Y-96979497D01* +X144237064Y-96979499D01* +X144351641Y-97010200D01* +X144351643Y-97010200D01* +X144470257Y-97010200D01* +X144470259Y-97010200D01* +X144584836Y-96979499D01* +X144584838Y-96979497D01* +X144584840Y-96979497D01* +X144652400Y-96940491D01* +X152606050Y-96940491D01* +X152606050Y-97059109D01* +X152633124Y-97160151D01* +X152636752Y-97173690D01* +X152696057Y-97276408D01* +X152696059Y-97276410D01* +X152696061Y-97276413D01* +X152779937Y-97360289D01* +X152779939Y-97360290D01* +X152779941Y-97360292D01* +X152882660Y-97419597D01* +X152882661Y-97419597D01* +X152882664Y-97419599D01* +X152997241Y-97450300D01* +X152997243Y-97450300D01* +X153115857Y-97450300D01* +X153115859Y-97450300D01* +X153230436Y-97419599D01* +X153230438Y-97419597D01* +X153230440Y-97419597D01* +X153333158Y-97360292D01* +X153333158Y-97360291D01* +X153333163Y-97360289D01* +X153417039Y-97276413D01* +X153437831Y-97240400D01* +X153476347Y-97173690D01* +X153476347Y-97173688D01* +X153476349Y-97173686D01* +X153507050Y-97059109D01* +X153507050Y-96940491D01* +X153476349Y-96825914D01* +X153476347Y-96825911D01* +X153476347Y-96825909D01* +X153417042Y-96723191D01* +X153417040Y-96723189D01* +X153417039Y-96723187D01* +X153333163Y-96639311D01* +X153333160Y-96639309D01* +X153333158Y-96639307D01* +X153230439Y-96580002D01* +X153230440Y-96580002D01* +X153216901Y-96576374D01* +X153115859Y-96549300D01* +X152997241Y-96549300D01* +X152927117Y-96568089D01* +X152882659Y-96580002D01* +X152779941Y-96639307D01* +X152696057Y-96723191D01* +X152636752Y-96825909D01* +X152633000Y-96839911D01* +X152606050Y-96940491D01* +X144652400Y-96940491D01* +X144687558Y-96920192D01* +X144687558Y-96920191D01* +X144687563Y-96920189D01* +X144771439Y-96836313D01* +X144828026Y-96738302D01* +X144830747Y-96733590D01* +X144830747Y-96733588D01* +X144830749Y-96733586D01* +X144861450Y-96619009D01* +X144861450Y-96500391D01* +X144830749Y-96385814D01* +X144830747Y-96385811D01* +X144830747Y-96385809D01* +X144771442Y-96283091D01* +X144771440Y-96283089D01* +X144771439Y-96283087D01* +X144687563Y-96199211D01* +X144687560Y-96199209D01* +X144687558Y-96199207D01* +X144584839Y-96139902D01* +X144584840Y-96139902D01* +X144571301Y-96136274D01* +X144470259Y-96109200D01* +X144351641Y-96109200D01* +X144281517Y-96127989D01* +X144237059Y-96139902D01* +X144134341Y-96199207D01* +X144050457Y-96283091D01* +X143991152Y-96385809D01* +X143977567Y-96436509D01* +X143960450Y-96500391D01* +X127605243Y-96500391D01* +X127597963Y-96493111D01* +X127597960Y-96493109D01* +X127597958Y-96493107D01* +X127495239Y-96433802D01* +X127495240Y-96433802D01* +X127481701Y-96430174D01* +X127380659Y-96403100D01* +X127262041Y-96403100D01* +X127191917Y-96421889D01* +X127147459Y-96433802D01* +X127044741Y-96493107D01* +X126960857Y-96576991D01* +X126901552Y-96679709D01* +X126901551Y-96679714D01* +X126870850Y-96794291D01* +X123760777Y-96794291D01* +X123793103Y-96738302D01* +X123802347Y-96722290D01* +X123802347Y-96722288D01* +X123802349Y-96722286D01* +X123833050Y-96607709D01* +X123833050Y-96489091D01* +X123802349Y-96374514D01* +X123802347Y-96374511D01* +X123802347Y-96374509D01* +X123743042Y-96271791D01* +X123743040Y-96271789D01* +X123743039Y-96271787D01* +X123659163Y-96187911D01* +X123659160Y-96187909D01* +X123659158Y-96187907D01* +X123556439Y-96128602D01* +X123556440Y-96128602D01* +X123542901Y-96124974D01* +X123441859Y-96097900D01* +X123323241Y-96097900D01* +X123253117Y-96116689D01* +X123208659Y-96128602D01* +X123105941Y-96187907D01* +X123022057Y-96271791D01* +X122962752Y-96374509D01* +X122962751Y-96374514D01* +X122932050Y-96489091D01* +X109110761Y-96489091D01* +X109124850Y-96436509D01* +X109124850Y-96317891D01* +X109094149Y-96203314D01* +X109094147Y-96203311D01* +X109094147Y-96203309D01* +X109034842Y-96100591D01* +X109034840Y-96100589D01* +X109034839Y-96100587D01* +X108950963Y-96016711D01* +X108950960Y-96016709D01* +X108950958Y-96016707D01* +X108848239Y-95957402D01* +X108848240Y-95957402D01* +X108834701Y-95953774D01* +X108733659Y-95926700D01* +X108615041Y-95926700D01* +X108546745Y-95945000D01* +X108500459Y-95957402D01* +X108397741Y-96016707D01* +X108313857Y-96100591D01* +X108254552Y-96203309D01* +X108252836Y-96209713D01* +X108223850Y-96317891D01* +X80818018Y-96317891D01* +X80818012Y-96311502D01* +X80817093Y-95402891D01* +X102470650Y-95402891D01* +X102470650Y-95521509D01* +X102479305Y-95553809D01* +X102501352Y-95636090D01* +X102560657Y-95738808D01* +X102560659Y-95738810D01* +X102560661Y-95738813D01* +X102644537Y-95822689D01* +X102644539Y-95822690D01* +X102644541Y-95822692D01* +X102747260Y-95881997D01* +X102747261Y-95881997D01* +X102747264Y-95881999D01* +X102861841Y-95912700D01* +X102861843Y-95912700D01* +X102980457Y-95912700D01* +X102980459Y-95912700D01* +X103095036Y-95881999D01* +X103095038Y-95881997D01* +X103095040Y-95881997D01* +X103197758Y-95822692D01* +X103197758Y-95822691D01* +X103197763Y-95822689D01* +X103281639Y-95738813D01* +X103322298Y-95668390D01* +X103340947Y-95636090D01* +X103340947Y-95636088D01* +X103340949Y-95636086D01* +X103371650Y-95521509D01* +X103371650Y-95402891D01* +X103340949Y-95288314D01* +X103340947Y-95288311D01* +X103340947Y-95288309D01* +X103281642Y-95185591D01* +X103281640Y-95185589D01* +X103281639Y-95185587D01* +X103197763Y-95101711D01* +X103197760Y-95101709D01* +X103197758Y-95101707D01* +X103095039Y-95042402D01* +X103095040Y-95042402D01* +X103081501Y-95038774D01* +X102980459Y-95011700D01* +X102861841Y-95011700D01* +X102791717Y-95030489D01* +X102747259Y-95042402D01* +X102644541Y-95101707D01* +X102560657Y-95185591D01* +X102501352Y-95288309D01* +X102492696Y-95320614D01* +X102470650Y-95402891D01* +X80817093Y-95402891D01* +X80817087Y-95396502D01* +X80816050Y-94371091D01* +X113068550Y-94371091D01* +X113068550Y-94489709D01* +X113084317Y-94548551D01* +X113099252Y-94604290D01* +X113158557Y-94707008D01* +X113158559Y-94707010D01* +X113158561Y-94707013D01* +X113242437Y-94790889D01* +X113242439Y-94790890D01* +X113242441Y-94790892D01* +X113345160Y-94850197D01* +X113345161Y-94850197D01* +X113345164Y-94850199D01* +X113459741Y-94880900D01* +X113459743Y-94880900D01* +X113578357Y-94880900D01* +X113578359Y-94880900D01* +X113692936Y-94850199D01* +X113692938Y-94850197D01* +X113692940Y-94850197D01* +X113795658Y-94790892D01* +X113795658Y-94790891D01* +X113795663Y-94790889D01* +X113879539Y-94707013D01* +X113888449Y-94691581D01* +X113938847Y-94604290D01* +X113938847Y-94604288D01* +X113938849Y-94604286D01* +X113969550Y-94489709D01* +X113969550Y-94371091D01* +X113938849Y-94256514D01* +X113931503Y-94243791D01* +X113898081Y-94185902D01* +X113898080Y-94185900D01* +X113879540Y-94153789D01* +X113879539Y-94153787D01* +X113868643Y-94142891D01* +X114196050Y-94142891D01* +X114196050Y-94261509D01* +X114212420Y-94322601D01* +X114226752Y-94376090D01* +X114286057Y-94478808D01* +X114286059Y-94478810D01* +X114286061Y-94478813D01* +X114369937Y-94562689D01* +X114369939Y-94562690D01* +X114369941Y-94562692D01* +X114472660Y-94621997D01* +X114472661Y-94621997D01* +X114472664Y-94621999D01* +X114587241Y-94652700D01* +X114587243Y-94652700D01* +X114705857Y-94652700D01* +X114705859Y-94652700D01* +X114820436Y-94621999D01* +X114820438Y-94621997D01* +X114820440Y-94621997D01* +X114923158Y-94562692D01* +X114923158Y-94562691D01* +X114923163Y-94562689D01* +X115007039Y-94478813D01* +X115008094Y-94476986D01* +X115065885Y-94376891D01* +X116380550Y-94376891D01* +X116380550Y-94495509D01* +X116401475Y-94573600D01* +X116411252Y-94610090D01* +X116470557Y-94712808D01* +X116470559Y-94712810D01* +X116470561Y-94712813D01* +X116554437Y-94796689D01* +X116554439Y-94796690D01* +X116554441Y-94796692D01* +X116657160Y-94855997D01* +X116657161Y-94855997D01* +X116657164Y-94855999D01* +X116771741Y-94886700D01* +X116771743Y-94886700D01* +X116890357Y-94886700D01* +X116890359Y-94886700D01* +X117004936Y-94855999D01* +X117004938Y-94855997D01* +X117004940Y-94855997D01* +X117107658Y-94796692D01* +X117107658Y-94796691D01* +X117107663Y-94796689D01* +X117160561Y-94743791D01* +X117501150Y-94743791D01* +X117501150Y-94862409D01* +X117520277Y-94933791D01* +X117531852Y-94976990D01* +X117591157Y-95079708D01* +X117591159Y-95079710D01* +X117591161Y-95079713D01* +X117675037Y-95163589D01* +X117675039Y-95163590D01* +X117675041Y-95163592D01* +X117777760Y-95222897D01* +X117777761Y-95222897D01* +X117777764Y-95222899D01* +X117892341Y-95253600D01* +X117892343Y-95253600D01* +X118010957Y-95253600D01* +X118010959Y-95253600D01* +X118125536Y-95222899D01* +X118125538Y-95222897D01* +X118125540Y-95222897D01* +X118228258Y-95163592D01* +X118228258Y-95163591D01* +X118228263Y-95163589D01* +X118312139Y-95079713D01* +X118371449Y-94976986D01* +X118402150Y-94862409D01* +X118402150Y-94743791D01* +X118371449Y-94629214D01* +X118371447Y-94629211D01* +X118371447Y-94629209D01* +X118312142Y-94526491D01* +X118312140Y-94526489D01* +X118312139Y-94526487D01* +X118228263Y-94442611D01* +X118228260Y-94442609D01* +X118228258Y-94442607D01* +X118125539Y-94383302D01* +X118125540Y-94383302D01* +X118101617Y-94376892D01* +X118010959Y-94352600D01* +X117892341Y-94352600D01* +X117823332Y-94371091D01* +X117777759Y-94383302D01* +X117675041Y-94442607D01* +X117591157Y-94526491D01* +X117531852Y-94629209D01* +X117525558Y-94652700D01* +X117501150Y-94743791D01* +X117160561Y-94743791D01* +X117191539Y-94712813D01* +X117203797Y-94691582D01* +X117205980Y-94687802D01* +X117250847Y-94610090D01* +X117250847Y-94610088D01* +X117250849Y-94610086D01* +X117281550Y-94495509D01* +X117281550Y-94376891D01* +X117250849Y-94262314D01* +X117250846Y-94262309D01* +X117240155Y-94243791D01* +X124241150Y-94243791D01* +X124241150Y-94362409D01* +X124251146Y-94399713D01* +X124271852Y-94476990D01* +X124331157Y-94579708D01* +X124331159Y-94579710D01* +X124331161Y-94579713D01* +X124415037Y-94663589D01* +X124415039Y-94663590D01* +X124415041Y-94663592D01* +X124517760Y-94722897D01* +X124517761Y-94722897D01* +X124517764Y-94722899D01* +X124632341Y-94753600D01* +X124632345Y-94753600D01* +X124633518Y-94753755D01* +X124634282Y-94754119D01* +X124638609Y-94755279D01* +X124638394Y-94756080D01* +X124688744Y-94780095D01* +X124717940Y-94833865D01* +X124716225Y-94877530D01* +X124701150Y-94933791D01* +X124701150Y-95052409D01* +X124714361Y-95101711D01* +X124731852Y-95166990D01* +X124791157Y-95269708D01* +X124791159Y-95269710D01* +X124791161Y-95269713D01* +X124835140Y-95313692D01* +X124862916Y-95368207D01* +X124853345Y-95428639D01* +X124810080Y-95471904D01* +X124778061Y-95481846D01* +X124772349Y-95482598D01* +X124772342Y-95482600D01* +X124772341Y-95482600D01* +X124738304Y-95491720D01* +X124657759Y-95513302D01* +X124555041Y-95572607D01* +X124471157Y-95656491D01* +X124411852Y-95759209D01* +X124394843Y-95822689D01* +X124381150Y-95873791D01* +X124381150Y-95992409D01* +X124387661Y-96016707D01* +X124411852Y-96106990D01* +X124471157Y-96209708D01* +X124471159Y-96209710D01* +X124471161Y-96209713D01* +X124555037Y-96293589D01* +X124555039Y-96293590D01* +X124555041Y-96293592D01* +X124657760Y-96352897D01* +X124657761Y-96352897D01* +X124657764Y-96352899D01* +X124772341Y-96383600D01* +X124772343Y-96383600D01* +X124890957Y-96383600D01* +X124890959Y-96383600D01* +X125005536Y-96352899D01* +X125005538Y-96352897D01* +X125005540Y-96352897D01* +X125108258Y-96293592D01* +X125108258Y-96293591D01* +X125108263Y-96293589D01* +X125192139Y-96209713D01* +X125192142Y-96209708D01* +X125251447Y-96106990D01* +X125251447Y-96106988D01* +X125251449Y-96106986D01* +X125282150Y-95992409D01* +X125282150Y-95873791D01* +X125251449Y-95759214D01* +X125251447Y-95759211D01* +X125251447Y-95759209D01* +X125192142Y-95656491D01* +X125192140Y-95656489D01* +X125192139Y-95656487D01* +X125148158Y-95612506D01* +X125120383Y-95557992D01* +X125129954Y-95497560D01* +X125173219Y-95454295D01* +X125205246Y-95444351D01* +X125210946Y-95443600D01* +X125210959Y-95443600D01* +X125325536Y-95412899D01* +X125325538Y-95412897D01* +X125325540Y-95412897D01* +X125428258Y-95353592D01* +X125428258Y-95353591D01* +X125428263Y-95353589D01* +X125512139Y-95269713D01* +X125558687Y-95189091D01* +X127056850Y-95189091D01* +X127056850Y-95307709D01* +X127080642Y-95396502D01* +X127087552Y-95422290D01* +X127146857Y-95525008D01* +X127146859Y-95525010D01* +X127146861Y-95525013D01* +X127230737Y-95608889D01* +X127230739Y-95608890D01* +X127230741Y-95608892D01* +X127333460Y-95668197D01* +X127333461Y-95668197D01* +X127333464Y-95668199D01* +X127448041Y-95698900D01* +X127448043Y-95698900D01* +X127566657Y-95698900D01* +X127566659Y-95698900D01* +X127681236Y-95668199D01* +X127681238Y-95668197D01* +X127681240Y-95668197D01* +X127783958Y-95608892D01* +X127783958Y-95608891D01* +X127783963Y-95608889D01* +X127867839Y-95525013D01* +X127869863Y-95521507D01* +X127919698Y-95435191D01* +X136225250Y-95435191D01* +X136225250Y-95553809D01* +X136226371Y-95557992D01* +X136255952Y-95668390D01* +X136315257Y-95771108D01* +X136315259Y-95771110D01* +X136315261Y-95771113D01* +X136399137Y-95854989D01* +X136399139Y-95854990D01* +X136399141Y-95854992D01* +X136501860Y-95914297D01* +X136501861Y-95914297D01* +X136501864Y-95914299D01* +X136616441Y-95945000D01* +X136616443Y-95945000D01* +X136735057Y-95945000D01* +X136735059Y-95945000D01* +X136849636Y-95914299D01* +X136849638Y-95914297D01* +X136849640Y-95914297D01* +X136952358Y-95854992D01* +X136952358Y-95854991D01* +X136952363Y-95854989D01* +X137036239Y-95771113D01* +X137054888Y-95738813D01* +X137095547Y-95668390D01* +X137095547Y-95668388D01* +X137095549Y-95668386D01* +X137126250Y-95553809D01* +X137126250Y-95435191D01* +X137095549Y-95320614D01* +X137095547Y-95320611D01* +X137095547Y-95320609D01* +X137036242Y-95217891D01* +X137036240Y-95217889D01* +X137036239Y-95217887D01* +X136952363Y-95134011D01* +X136952360Y-95134009D01* +X136952358Y-95134007D01* +X136849639Y-95074702D01* +X136849640Y-95074702D01* +X136836101Y-95071074D01* +X136735059Y-95044000D01* +X136616441Y-95044000D01* +X136546317Y-95062789D01* +X136501859Y-95074702D01* +X136399141Y-95134007D01* +X136315257Y-95217891D01* +X136255952Y-95320609D01* +X136243198Y-95368207D01* +X136225250Y-95435191D01* +X127919698Y-95435191D01* +X127927147Y-95422290D01* +X127927147Y-95422288D01* +X127927149Y-95422286D01* +X127957850Y-95307709D01* +X127957850Y-95189091D01* +X127927149Y-95074514D01* +X127927147Y-95074511D01* +X127927147Y-95074509D01* +X127867842Y-94971791D01* +X127867840Y-94971789D01* +X127867839Y-94971787D01* +X127783963Y-94887911D01* +X127783960Y-94887909D01* +X127783958Y-94887907D01* +X127681239Y-94828602D01* +X127681240Y-94828602D01* +X127646192Y-94819211D01* +X127566659Y-94797900D01* +X127448041Y-94797900D01* +X127377917Y-94816689D01* +X127333459Y-94828602D01* +X127230741Y-94887907D01* +X127146857Y-94971791D01* +X127087552Y-95074509D01* +X127071610Y-95134007D01* +X127056850Y-95189091D01* +X125558687Y-95189091D01* +X125571449Y-95166986D01* +X125602150Y-95052409D01* +X125602150Y-94933791D01* +X125571449Y-94819214D01* +X125515120Y-94721651D01* +X125502399Y-94661803D01* +X125527285Y-94605908D01* +X125580273Y-94575315D01* +X125587935Y-94573998D01* +X125590955Y-94573600D01* +X125590959Y-94573600D01* +X125705536Y-94542899D01* +X125705538Y-94542897D01* +X125705540Y-94542897D01* +X125808258Y-94483592D01* +X125808258Y-94483591D01* +X125808263Y-94483589D01* +X125892139Y-94399713D01* +X125905315Y-94376892D01* +X125951447Y-94296990D01* +X125951447Y-94296988D01* +X125951449Y-94296986D01* +X125982150Y-94182409D01* +X125982150Y-94063791D01* +X125951449Y-93949214D01* +X125951447Y-93949211D01* +X125951447Y-93949209D01* +X125892142Y-93846491D01* +X125892140Y-93846489D01* +X125892139Y-93846487D01* +X125808263Y-93762611D01* +X125808260Y-93762609D01* +X125808258Y-93762607D01* +X125705539Y-93703302D01* +X125705540Y-93703302D01* +X125687951Y-93698589D01* +X125590959Y-93672600D01* +X125472341Y-93672600D01* +X125402217Y-93691389D01* +X125357759Y-93703302D01* +X125255041Y-93762607D01* +X125171160Y-93846488D01* +X125126219Y-93924326D01* +X125080748Y-93965266D01* +X125019898Y-93971660D01* +X124973485Y-93946460D01* +X124973409Y-93946560D01* +X124972779Y-93946077D01* +X124970481Y-93944829D01* +X124968263Y-93942611D01* +X124968260Y-93942609D01* +X124968258Y-93942607D01* +X124865539Y-93883302D01* +X124865540Y-93883302D01* +X124852001Y-93879674D01* +X124750959Y-93852600D01* +X124632341Y-93852600D01* +X124562217Y-93871389D01* +X124517759Y-93883302D01* +X124415041Y-93942607D01* +X124331157Y-94026491D01* +X124271852Y-94129209D01* +X124257598Y-94182407D01* +X124241150Y-94243791D01* +X117240155Y-94243791D01* +X117191542Y-94159591D01* +X117191540Y-94159589D01* +X117191539Y-94159587D01* +X117107663Y-94075711D01* +X117107660Y-94075709D01* +X117107658Y-94075707D01* +X117004939Y-94016402D01* +X117004940Y-94016402D01* +X116983290Y-94010601D01* +X116890359Y-93985700D01* +X116771741Y-93985700D01* +X116701617Y-94004489D01* +X116657159Y-94016402D01* +X116554441Y-94075707D01* +X116470557Y-94159591D01* +X116411252Y-94262309D01* +X116400163Y-94303693D01* +X116380550Y-94376891D01* +X115065885Y-94376891D01* +X115066347Y-94376090D01* +X115066347Y-94376088D01* +X115066349Y-94376086D01* +X115097050Y-94261509D01* +X115097050Y-94142891D01* +X115066349Y-94028314D01* +X115066347Y-94028311D01* +X115066347Y-94028309D01* +X115007042Y-93925591D01* +X115007040Y-93925589D01* +X115007039Y-93925587D01* +X114923163Y-93841711D01* +X114923160Y-93841709D01* +X114923158Y-93841707D01* +X114820439Y-93782402D01* +X114820440Y-93782402D01* +X114806901Y-93778774D01* +X114705859Y-93751700D01* +X114587241Y-93751700D01* +X114517117Y-93770489D01* +X114472659Y-93782402D01* +X114369941Y-93841707D01* +X114286057Y-93925591D01* +X114226752Y-94028309D01* +X114209587Y-94092369D01* +X114196050Y-94142891D01* +X113868643Y-94142891D01* +X113795663Y-94069911D01* +X113795660Y-94069909D01* +X113795658Y-94069907D01* +X113692939Y-94010602D01* +X113692940Y-94010602D01* +X113679401Y-94006974D01* +X113578359Y-93979900D01* +X113459741Y-93979900D01* +X113391818Y-93998100D01* +X113345159Y-94010602D01* +X113242441Y-94069907D01* +X113158557Y-94153791D01* +X113099252Y-94256509D01* +X113097698Y-94262309D01* +X113068550Y-94371091D01* +X80816050Y-94371091D01* +X80816044Y-94364702D01* +X80814946Y-93278791D01* +X92916150Y-93278791D01* +X92916150Y-93397409D01* +X92943224Y-93498451D01* +X92946852Y-93511990D01* +X93006157Y-93614708D01* +X93006159Y-93614710D01* +X93006161Y-93614713D01* +X93090037Y-93698589D01* +X93090039Y-93698590D01* +X93090041Y-93698592D01* +X93192760Y-93757897D01* +X93192761Y-93757897D01* +X93192764Y-93757899D01* +X93307341Y-93788600D01* +X93307343Y-93788600D01* +X93425957Y-93788600D01* +X93425959Y-93788600D01* +X93540536Y-93757899D01* +X93540538Y-93757897D01* +X93540540Y-93757897D01* +X93643258Y-93698592D01* +X93643258Y-93698591D01* +X93643263Y-93698589D01* +X93727139Y-93614713D01* +X93773918Y-93533690D01* +X93786447Y-93511990D01* +X93786447Y-93511988D01* +X93786449Y-93511986D01* +X93817150Y-93397409D01* +X93817150Y-93294491D01* +X99030250Y-93294491D01* +X99030250Y-93413109D01* +X99042689Y-93459530D01* +X99060952Y-93527690D01* +X99120257Y-93630408D01* +X99120259Y-93630410D01* +X99120261Y-93630413D01* +X99204137Y-93714289D01* +X99204139Y-93714290D01* +X99204141Y-93714292D01* +X99306860Y-93773597D01* +X99306861Y-93773597D01* +X99306864Y-93773599D01* +X99421441Y-93804300D01* +X99421443Y-93804300D01* +X99540057Y-93804300D01* +X99540059Y-93804300D01* +X99654636Y-93773599D01* +X99654638Y-93773597D01* +X99654640Y-93773597D01* +X99757358Y-93714292D01* +X99757358Y-93714291D01* +X99757363Y-93714289D01* +X99841239Y-93630413D01* +X99841242Y-93630408D01* +X99900547Y-93527690D01* +X99900547Y-93527688D01* +X99900549Y-93527686D01* +X99931250Y-93413109D01* +X99931250Y-93300491D01* +X154264950Y-93300491D01* +X154264950Y-93419109D01* +X154289838Y-93511990D01* +X154295652Y-93533690D01* +X154354957Y-93636408D01* +X154354959Y-93636410D01* +X154354961Y-93636413D01* +X154438837Y-93720289D01* +X154438839Y-93720290D01* +X154438841Y-93720292D01* +X154541560Y-93779597D01* +X154541561Y-93779597D01* +X154541564Y-93779599D01* +X154656141Y-93810300D01* +X154656143Y-93810300D01* +X154774757Y-93810300D01* +X154774759Y-93810300D01* +X154889336Y-93779599D01* +X154889338Y-93779597D01* +X154889340Y-93779597D01* +X154992058Y-93720292D01* +X154992058Y-93720291D01* +X154992063Y-93720289D01* +X155075939Y-93636413D01* +X155135249Y-93533686D01* +X155165950Y-93419109D01* +X155165950Y-93300491D01* +X155135249Y-93185914D01* +X155135247Y-93185911D01* +X155135247Y-93185909D01* +X155075942Y-93083191D01* +X155075940Y-93083189D01* +X155075939Y-93083187D01* +X154992063Y-92999311D01* +X154992060Y-92999309D01* +X154992058Y-92999307D01* +X154889339Y-92940002D01* +X154889340Y-92940002D01* +X154875801Y-92936374D01* +X154774759Y-92909300D01* +X154656141Y-92909300D01* +X154586017Y-92928089D01* +X154541559Y-92940002D01* +X154438841Y-92999307D01* +X154354957Y-93083191D01* +X154295652Y-93185909D01* +X154289662Y-93208266D01* +X154264950Y-93300491D01* +X99931250Y-93300491D01* +X99931250Y-93294491D01* +X99900549Y-93179914D01* +X99900547Y-93179911D01* +X99900547Y-93179909D01* +X99841242Y-93077191D01* +X99841240Y-93077189D01* +X99841239Y-93077187D01* +X99757363Y-92993311D01* +X99757360Y-92993309D01* +X99757358Y-92993307D01* +X99654639Y-92934002D01* +X99654640Y-92934002D01* +X99640824Y-92930300D01* +X99540059Y-92903300D01* +X99421441Y-92903300D01* +X99351317Y-92922089D01* +X99306859Y-92934002D01* +X99204141Y-92993307D01* +X99120257Y-93077191D01* +X99060952Y-93179909D01* +X99043787Y-93243969D01* +X99030250Y-93294491D01* +X93817150Y-93294491D01* +X93817150Y-93278791D01* +X93786449Y-93164214D01* +X93786447Y-93164211D01* +X93786447Y-93164209D01* +X93727142Y-93061491D01* +X93727140Y-93061489D01* +X93727139Y-93061487D01* +X93643263Y-92977611D01* +X93643260Y-92977609D01* +X93643258Y-92977607D01* +X93540539Y-92918302D01* +X93540540Y-92918302D01* +X93506944Y-92909300D01* +X93425959Y-92887600D01* +X93307341Y-92887600D01* +X93248748Y-92903300D01* +X93192759Y-92918302D01* +X93090041Y-92977607D01* +X93006157Y-93061491D01* +X92946852Y-93164209D01* +X92936406Y-93203195D01* +X92916150Y-93278791D01* +X80814946Y-93278791D01* +X80814940Y-93272402D01* +X80812960Y-91314391D01* +X112606250Y-91314391D01* +X112606250Y-91433009D01* +X112627925Y-91513900D01* +X112636952Y-91547590D01* +X112696257Y-91650308D01* +X112696259Y-91650310D01* +X112696261Y-91650313D01* +X112780137Y-91734189D01* +X112780139Y-91734190D01* +X112780141Y-91734192D01* +X112882860Y-91793497D01* +X112882861Y-91793497D01* +X112882864Y-91793499D01* +X112997441Y-91824200D01* +X112997443Y-91824200D01* +X113116057Y-91824200D01* +X113116059Y-91824200D01* +X113230636Y-91793499D01* +X113230638Y-91793497D01* +X113230640Y-91793497D01* +X113308072Y-91748791D01* +X117573750Y-91748791D01* +X117573750Y-91867409D01* +X117584977Y-91909307D01* +X117604452Y-91981990D01* +X117663757Y-92084708D01* +X117663759Y-92084710D01* +X117663761Y-92084713D01* +X117747637Y-92168589D01* +X117747639Y-92168590D01* +X117747641Y-92168592D01* +X117850360Y-92227897D01* +X117850361Y-92227897D01* +X117850364Y-92227899D01* +X117964941Y-92258600D01* +X117964943Y-92258600D01* +X118083557Y-92258600D01* +X118083559Y-92258600D01* +X118198136Y-92227899D01* +X118198138Y-92227897D01* +X118198140Y-92227897D01* +X118300858Y-92168592D01* +X118300858Y-92168591D01* +X118300863Y-92168589D01* +X118384739Y-92084713D01* +X118416732Y-92029300D01* +X118444047Y-91981990D01* +X118444047Y-91981988D01* +X118444049Y-91981986D01* +X118464653Y-91905091D01* +X125198750Y-91905091D01* +X125198750Y-92023709D01* +X125208475Y-92060002D01* +X125229452Y-92138290D01* +X125288757Y-92241008D01* +X125288759Y-92241010D01* +X125288761Y-92241013D01* +X125372637Y-92324889D01* +X125372639Y-92324890D01* +X125372641Y-92324892D01* +X125475360Y-92384197D01* +X125475361Y-92384197D01* +X125475364Y-92384199D01* +X125589941Y-92414900D01* +X125589943Y-92414900D01* +X125708557Y-92414900D01* +X125708559Y-92414900D01* +X125823136Y-92384199D01* +X125823138Y-92384197D01* +X125823140Y-92384197D01* +X125826614Y-92382191D01* +X127215050Y-92382191D01* +X127215050Y-92500809D01* +X127235598Y-92577494D01* +X127245752Y-92615390D01* +X127305057Y-92718108D01* +X127305059Y-92718110D01* +X127305061Y-92718113D01* +X127388937Y-92801989D01* +X127388939Y-92801990D01* +X127388941Y-92801992D01* +X127491660Y-92861297D01* +X127491661Y-92861297D01* +X127491664Y-92861299D01* +X127606241Y-92892000D01* +X127606243Y-92892000D01* +X127724857Y-92892000D01* +X127724859Y-92892000D01* +X127839436Y-92861299D01* +X127839438Y-92861297D01* +X127839440Y-92861297D01* +X127942158Y-92801992D01* +X127942158Y-92801991D01* +X127942163Y-92801989D01* +X128026039Y-92718113D01* +X128031763Y-92708199D01* +X128077232Y-92667257D01* +X128138083Y-92660861D01* +X128191071Y-92691454D01* +X128203237Y-92708199D01* +X128208961Y-92718113D01* +X128292837Y-92801989D01* +X128292839Y-92801990D01* +X128292841Y-92801992D01* +X128395560Y-92861297D01* +X128395561Y-92861297D01* +X128395564Y-92861299D01* +X128510141Y-92892000D01* +X128510143Y-92892000D01* +X128628757Y-92892000D01* +X128628759Y-92892000D01* +X128743336Y-92861299D01* +X128743338Y-92861297D01* +X128743340Y-92861297D01* +X128846058Y-92801992D01* +X128846058Y-92801991D01* +X128846063Y-92801989D01* +X128929939Y-92718113D01* +X128989249Y-92615386D01* +X128989250Y-92615380D01* +X128991731Y-92609394D01* +X128994028Y-92610345D01* +X129021498Y-92568021D01* +X129078614Y-92546079D01* +X129137718Y-92561899D01* +X129176236Y-92609439D01* +X129179447Y-92619318D01* +X129183350Y-92633885D01* +X129183352Y-92633889D01* +X129242657Y-92736608D01* +X129242659Y-92736610D01* +X129242661Y-92736613D01* +X129326537Y-92820489D01* +X129326539Y-92820490D01* +X129326541Y-92820492D01* +X129429260Y-92879797D01* +X129429261Y-92879797D01* +X129429264Y-92879799D01* +X129543841Y-92910500D01* +X129543843Y-92910500D01* +X129662457Y-92910500D01* +X129662459Y-92910500D01* +X129777036Y-92879799D01* +X129858374Y-92832837D01* +X129918221Y-92820116D01* +X129974117Y-92845002D01* +X130003500Y-92892950D01* +X130027250Y-92981585D01* +X130027252Y-92981589D01* +X130086557Y-93084308D01* +X130086559Y-93084310D01* +X130086561Y-93084313D01* +X130170437Y-93168189D01* +X130170439Y-93168190D01* +X130170441Y-93168192D01* +X130273160Y-93227497D01* +X130273161Y-93227497D01* +X130273164Y-93227499D01* +X130387741Y-93258200D01* +X130387743Y-93258200D01* +X130506357Y-93258200D01* +X130506359Y-93258200D01* +X130620936Y-93227499D01* +X130620938Y-93227497D01* +X130620940Y-93227497D01* +X130654240Y-93208271D01* +X130654249Y-93208266D01* +X130680463Y-93193130D01* +X130723663Y-93168189D01* +X130807539Y-93084313D01* +X130816550Y-93068706D01* +X130866847Y-92981590D01* +X130866847Y-92981588D01* +X130866849Y-92981586D01* +X130897550Y-92867009D01* +X130897550Y-92748391D01* +X130866849Y-92633814D01* +X130866847Y-92633811D01* +X130866847Y-92633809D01* +X130807542Y-92531091D01* +X130807540Y-92531089D01* +X130807539Y-92531087D01* +X130723663Y-92447211D01* +X130723660Y-92447209D01* +X130723658Y-92447207D01* +X130677385Y-92420491D01* +X140092450Y-92420491D01* +X140092450Y-92539109D01* +X140112889Y-92615389D01* +X140123152Y-92653690D01* +X140182457Y-92756408D01* +X140182459Y-92756410D01* +X140182461Y-92756413D01* +X140266337Y-92840289D01* +X140266339Y-92840290D01* +X140266341Y-92840292D01* +X140369060Y-92899597D01* +X140369061Y-92899597D01* +X140369064Y-92899599D01* +X140483641Y-92930300D01* +X140483643Y-92930300D01* +X140602257Y-92930300D01* +X140602259Y-92930300D01* +X140716836Y-92899599D01* +X140716838Y-92899597D01* +X140716840Y-92899597D01* +X140819558Y-92840292D01* +X140819558Y-92840291D01* +X140819563Y-92840289D01* +X140903439Y-92756413D01* +X140925552Y-92718113D01* +X140962747Y-92653690D01* +X140962747Y-92653688D01* +X140962749Y-92653686D01* +X140993450Y-92539109D01* +X140993450Y-92420491D01* +X140962749Y-92305914D01* +X140962747Y-92305911D01* +X140962747Y-92305909D01* +X140903442Y-92203191D01* +X140903440Y-92203189D01* +X140903439Y-92203187D01* +X140819563Y-92119311D01* +X140819560Y-92119309D01* +X140819558Y-92119307D01* +X140716839Y-92060002D01* +X140716840Y-92060002D01* +X140703301Y-92056374D01* +X140602259Y-92029300D01* +X140483641Y-92029300D01* +X140413517Y-92048089D01* +X140369059Y-92060002D01* +X140266341Y-92119307D01* +X140182457Y-92203191D01* +X140123152Y-92305909D01* +X140114132Y-92339572D01* +X140092450Y-92420491D01* +X130677385Y-92420491D01* +X130620939Y-92387902D01* +X130620940Y-92387902D01* +X130593203Y-92380470D01* +X130506359Y-92357200D01* +X130387741Y-92357200D01* +X130332291Y-92372058D01* +X130273162Y-92387901D01* +X130191825Y-92434862D01* +X130131976Y-92447583D01* +X130076081Y-92422696D01* +X130046698Y-92374749D01* +X130022949Y-92286114D01* +X130022947Y-92286110D01* +X130022947Y-92286109D01* +X129963642Y-92183391D01* +X129963640Y-92183389D01* +X129963639Y-92183387D01* +X129879763Y-92099511D01* +X129879760Y-92099509D01* +X129879758Y-92099507D01* +X129777039Y-92040202D01* +X129777040Y-92040202D01* +X129736353Y-92029300D01* +X129662459Y-92009500D01* +X129543841Y-92009500D01* +X129473717Y-92028289D01* +X129429259Y-92040202D01* +X129326541Y-92099507D01* +X129242657Y-92183391D01* +X129183352Y-92286110D01* +X129180869Y-92292106D01* +X129178579Y-92291157D01* +X129151062Y-92333510D01* +X129093935Y-92355423D01* +X129034839Y-92339572D01* +X128996345Y-92292013D01* +X128993151Y-92282178D01* +X128989248Y-92267611D01* +X128989247Y-92267610D01* +X128929942Y-92164891D01* +X128929940Y-92164889D01* +X128929939Y-92164887D01* +X128846063Y-92081011D01* +X128846060Y-92081009D01* +X128846058Y-92081007D01* +X128743339Y-92021702D01* +X128743340Y-92021702D01* +X128729801Y-92018074D01* +X128628759Y-91991000D01* +X128510141Y-91991000D01* +X128440017Y-92009789D01* +X128395559Y-92021702D01* +X128292841Y-92081007D01* +X128208957Y-92164891D01* +X128203235Y-92174803D01* +X128157765Y-92215743D01* +X128096915Y-92222137D01* +X128043927Y-92191543D01* +X128031765Y-92174803D01* +X128026042Y-92164891D01* +X128026040Y-92164889D01* +X128026039Y-92164887D01* +X127942163Y-92081011D01* +X127942160Y-92081009D01* +X127942158Y-92081007D01* +X127839439Y-92021702D01* +X127839440Y-92021702D01* +X127825901Y-92018074D01* +X127724859Y-91991000D01* +X127606241Y-91991000D01* +X127536117Y-92009789D01* +X127491659Y-92021702D01* +X127388941Y-92081007D01* +X127305057Y-92164891D01* +X127245752Y-92267609D01* +X127239213Y-92292013D01* +X127215050Y-92382191D01* +X125826614Y-92382191D01* +X125925858Y-92324892D01* +X125925858Y-92324891D01* +X125925863Y-92324889D01* +X126009739Y-92241013D01* +X126009742Y-92241008D01* +X126069047Y-92138290D01* +X126069047Y-92138288D01* +X126069049Y-92138286D01* +X126099750Y-92023709D01* +X126099750Y-91905091D01* +X126069049Y-91790514D01* +X126069047Y-91790511D01* +X126069047Y-91790509D01* +X126009742Y-91687791D01* +X126009740Y-91687789D01* +X126009739Y-91687787D01* +X125925863Y-91603911D01* +X125925860Y-91603909D01* +X125925858Y-91603907D01* +X125823139Y-91544602D01* +X125823140Y-91544602D01* +X125809601Y-91540974D01* +X125708559Y-91513900D01* +X125589941Y-91513900D01* +X125524306Y-91531487D01* +X125475359Y-91544602D01* +X125372641Y-91603907D01* +X125288757Y-91687791D01* +X125229452Y-91790509D01* +X125220425Y-91824200D01* +X125198750Y-91905091D01* +X118464653Y-91905091D01* +X118474750Y-91867409D01* +X118474750Y-91748791D01* +X118444049Y-91634214D01* +X118444047Y-91634211D01* +X118444047Y-91634209D01* +X118384742Y-91531491D01* +X118384740Y-91531489D01* +X118384739Y-91531487D01* +X118300863Y-91447611D01* +X118300860Y-91447609D01* +X118300858Y-91447607D01* +X118198139Y-91388302D01* +X118198140Y-91388302D01* +X118180054Y-91383456D01* +X118083559Y-91357600D01* +X117964941Y-91357600D01* +X117894817Y-91376389D01* +X117850359Y-91388302D01* +X117747641Y-91447607D01* +X117663757Y-91531491D01* +X117604452Y-91634209D01* +X117589655Y-91689432D01* +X117573750Y-91748791D01* +X113308072Y-91748791D01* +X113333358Y-91734192D01* +X113333358Y-91734191D01* +X113333363Y-91734189D01* +X113417239Y-91650313D01* +X113436544Y-91616876D01* +X113476547Y-91547590D01* +X113476547Y-91547588D01* +X113476549Y-91547586D01* +X113507250Y-91433009D01* +X113507250Y-91314391D01* +X113494924Y-91268391D01* +X123603950Y-91268391D01* +X123603950Y-91387009D01* +X123624662Y-91464308D01* +X123634652Y-91501590D01* +X123693957Y-91604308D01* +X123693959Y-91604310D01* +X123693961Y-91604313D01* +X123777837Y-91688189D01* +X123777839Y-91688190D01* +X123777841Y-91688192D01* +X123880560Y-91747497D01* +X123880561Y-91747497D01* +X123880564Y-91747499D01* +X123995141Y-91778200D01* +X123995143Y-91778200D01* +X124113757Y-91778200D01* +X124113759Y-91778200D01* +X124228336Y-91747499D01* +X124228338Y-91747497D01* +X124228340Y-91747497D01* +X124331058Y-91688192D01* +X124331058Y-91688191D01* +X124331063Y-91688189D01* +X124414939Y-91604313D01* +X124415171Y-91603911D01* +X124474247Y-91501590D01* +X124474247Y-91501588D01* +X124474249Y-91501586D01* +X124504950Y-91387009D01* +X124504950Y-91268391D01* +X124474249Y-91153814D01* +X124474247Y-91153811D01* +X124474247Y-91153809D01* +X124414942Y-91051091D01* +X124414940Y-91051089D01* +X124414939Y-91051087D01* +X124331063Y-90967211D01* +X124331060Y-90967209D01* +X124331058Y-90967207D01* +X124228339Y-90907902D01* +X124228340Y-90907902D01* +X124214801Y-90904274D01* +X124113759Y-90877200D01* +X123995141Y-90877200D01* +X123925017Y-90895989D01* +X123880559Y-90907902D01* +X123777841Y-90967207D01* +X123693957Y-91051091D01* +X123634652Y-91153809D01* +X123634651Y-91153814D01* +X123603950Y-91268391D01* +X113494924Y-91268391D01* +X113476549Y-91199814D01* +X113476547Y-91199811D01* +X113476547Y-91199809D01* +X113417242Y-91097091D01* +X113417240Y-91097089D01* +X113417239Y-91097087D01* +X113333363Y-91013211D01* +X113333360Y-91013209D01* +X113333358Y-91013207D01* +X113230639Y-90953902D01* +X113230640Y-90953902D01* +X113217101Y-90950274D01* +X113116059Y-90923200D01* +X112997441Y-90923200D01* +X112927317Y-90941989D01* +X112882859Y-90953902D01* +X112780141Y-91013207D01* +X112696257Y-91097091D01* +X112636952Y-91199809D01* +X112636951Y-91199814D01* +X112606250Y-91314391D01* +X80812960Y-91314391D01* +X80812954Y-91308002D01* +X80810975Y-89350625D01* +X118831150Y-89350625D01* +X118831150Y-89495574D01* +X118868667Y-89635589D01* +X118941137Y-89761110D01* +X118941139Y-89761112D01* +X118941141Y-89761115D01* +X119043635Y-89863609D01* +X119043637Y-89863610D01* +X119043639Y-89863612D01* +X119169161Y-89936082D01* +X119169162Y-89936082D01* +X119169165Y-89936084D01* +X119309175Y-89973600D01* +X119309176Y-89973600D01* +X119454124Y-89973600D01* +X119454125Y-89973600D01* +X119594135Y-89936084D01* +X119594137Y-89936082D01* +X119594139Y-89936082D01* +X119719660Y-89863612D01* +X119719660Y-89863611D01* +X119719665Y-89863609D01* +X119822159Y-89761115D01* +X119878453Y-89663612D01* +X119894632Y-89635589D01* +X119894632Y-89635587D01* +X119894634Y-89635585D01* +X119932150Y-89495575D01* +X119932150Y-89350625D01* +X119894634Y-89210615D01* +X119894632Y-89210612D01* +X119894632Y-89210610D01* +X119884832Y-89193636D01* +X119859999Y-89150625D01* +X126271150Y-89150625D01* +X126271150Y-89295575D01* +X126285901Y-89350625D01* +X126308667Y-89435589D01* +X126381137Y-89561110D01* +X126381139Y-89561112D01* +X126381141Y-89561115D01* +X126483635Y-89663609D01* +X126483637Y-89663610D01* +X126483639Y-89663612D01* +X126609161Y-89736082D01* +X126609162Y-89736082D01* +X126609165Y-89736084D01* +X126749175Y-89773600D01* +X126749176Y-89773600D01* +X126894124Y-89773600D01* +X126894125Y-89773600D01* +X127034135Y-89736084D01* +X127034137Y-89736082D01* +X127034139Y-89736082D01* +X127159660Y-89663612D01* +X127159660Y-89663611D01* +X127159665Y-89663609D01* +X127262159Y-89561115D01* +X127265893Y-89554648D01* +X127334632Y-89435589D01* +X127334632Y-89435587D01* +X127334634Y-89435585D01* +X127372150Y-89295575D01* +X127372150Y-89150625D01* +X127334634Y-89010615D01* +X127334632Y-89010612D01* +X127334632Y-89010610D01* +X127314189Y-88975202D01* +X127289356Y-88932191D01* +X136872950Y-88932191D01* +X136872950Y-89050809D01* +X136886265Y-89100500D01* +X136903652Y-89165390D01* +X136962957Y-89268108D01* +X136962959Y-89268110D01* +X136962961Y-89268113D01* +X137046837Y-89351989D01* +X137046839Y-89351990D01* +X137046841Y-89351992D01* +X137149560Y-89411297D01* +X137149561Y-89411297D01* +X137149564Y-89411299D01* +X137264141Y-89442000D01* +X137264143Y-89442000D01* +X137382757Y-89442000D01* +X137382759Y-89442000D01* +X137497336Y-89411299D01* +X137497338Y-89411297D01* +X137497340Y-89411297D01* +X137600058Y-89351992D01* +X137600058Y-89351991D01* +X137600063Y-89351989D01* +X137683939Y-89268113D01* +X137705608Y-89230581D01* +X137743247Y-89165390D01* +X137743247Y-89165388D01* +X137743249Y-89165386D01* +X137773950Y-89050809D01* +X137773950Y-88932191D01* +X137743249Y-88817614D01* +X137743247Y-88817611D01* +X137743247Y-88817609D01* +X137683942Y-88714891D01* +X137683940Y-88714889D01* +X137683939Y-88714887D01* +X137600063Y-88631011D01* +X137600060Y-88631009D01* +X137600058Y-88631007D01* +X137497339Y-88571702D01* +X137497340Y-88571702D01* +X137483801Y-88568074D01* +X137382759Y-88541000D01* +X137264141Y-88541000D01* +X137194017Y-88559789D01* +X137149559Y-88571702D01* +X137046841Y-88631007D01* +X136962957Y-88714891D01* +X136903652Y-88817609D01* +X136903651Y-88817614D01* +X136872950Y-88932191D01* +X127289356Y-88932191D01* +X127262162Y-88885089D01* +X127262160Y-88885087D01* +X127262159Y-88885085D01* +X127159665Y-88782591D01* +X127159662Y-88782589D01* +X127159660Y-88782587D01* +X127034138Y-88710117D01* +X127034139Y-88710117D01* +X126946287Y-88686577D01* +X126894125Y-88672600D01* +X126749175Y-88672600D01* +X126697013Y-88686577D01* +X126609160Y-88710117D01* +X126483639Y-88782587D01* +X126381137Y-88885089D01* +X126308667Y-89010610D01* +X126284581Y-89100500D01* +X126271150Y-89150625D01* +X119859999Y-89150625D01* +X119822162Y-89085089D01* +X119822160Y-89085087D01* +X119822159Y-89085085D01* +X119719665Y-88982591D01* +X119719662Y-88982589D01* +X119719660Y-88982587D01* +X119594138Y-88910117D01* +X119594139Y-88910117D01* +X119555740Y-88899828D01* +X119454125Y-88872600D01* +X119309175Y-88872600D01* +X119262581Y-88885085D01* +X119169160Y-88910117D01* +X119043639Y-88982587D01* +X118941137Y-89085089D01* +X118868667Y-89210610D01* +X118831150Y-89350625D01* +X80810975Y-89350625D01* +X80810969Y-89344236D01* +X80805913Y-84342291D01* +X93698650Y-84342291D01* +X93698650Y-84460909D01* +X93716122Y-84526114D01* +X93729352Y-84575490D01* +X93788657Y-84678208D01* +X93788659Y-84678210D01* +X93788661Y-84678213D01* +X93872537Y-84762089D01* +X93872539Y-84762090D01* +X93872541Y-84762092D01* +X93975260Y-84821397D01* +X93975261Y-84821397D01* +X93975264Y-84821399D01* +X94089841Y-84852100D01* +X94089843Y-84852100D01* +X94208457Y-84852100D01* +X94208459Y-84852100D01* +X94323036Y-84821399D01* +X94323038Y-84821397D01* +X94323040Y-84821397D01* +X94425758Y-84762092D01* +X94425758Y-84762091D01* +X94425763Y-84762089D01* +X94509639Y-84678213D01* +X94552020Y-84604808D01* +X94568947Y-84575490D01* +X94568947Y-84575488D01* +X94568949Y-84575486D01* +X94599650Y-84460909D01* +X94599650Y-84342291D01* +X94579982Y-84268891D01* +X99910650Y-84268891D01* +X99910650Y-84387509D01* +X99920187Y-84423100D01* +X99941352Y-84502090D01* +X100000657Y-84604808D01* +X100000659Y-84604810D01* +X100000661Y-84604813D01* +X100084537Y-84688689D01* +X100084539Y-84688690D01* +X100084541Y-84688692D01* +X100187260Y-84747997D01* +X100187261Y-84747997D01* +X100187264Y-84747999D01* +X100301841Y-84778700D01* +X100301843Y-84778700D01* +X100420457Y-84778700D01* +X100420459Y-84778700D01* +X100535036Y-84747999D01* +X100535038Y-84747997D01* +X100535040Y-84747997D01* +X100637758Y-84688692D01* +X100637758Y-84688691D01* +X100637763Y-84688689D01* +X100721639Y-84604813D01* +X100721642Y-84604808D01* +X100780947Y-84502090D01* +X100780947Y-84502088D01* +X100780949Y-84502086D01* +X100811650Y-84387509D01* +X100811650Y-84268891D01* +X100783328Y-84163191D01* +X102877250Y-84163191D01* +X102877250Y-84281809D01* +X102900733Y-84369447D01* +X102907952Y-84396390D01* +X102967257Y-84499108D01* +X102967259Y-84499110D01* +X102967261Y-84499113D01* +X103051137Y-84582989D01* +X103051139Y-84582990D01* +X103051141Y-84582992D01* +X103153860Y-84642297D01* +X103153861Y-84642297D01* +X103153864Y-84642299D01* +X103268441Y-84673000D01* +X103268443Y-84673000D01* +X103387057Y-84673000D01* +X103387059Y-84673000D01* +X103501636Y-84642299D01* +X103501638Y-84642297D01* +X103501640Y-84642297D01* +X103604358Y-84582992D01* +X103604358Y-84582991D01* +X103604363Y-84582989D01* +X103688239Y-84499113D01* +X103710296Y-84460909D01* +X103747547Y-84396390D01* +X103747547Y-84396388D01* +X103747549Y-84396386D01* +X103778250Y-84281809D01* +X103778250Y-84163191D01* +X103747549Y-84048614D01* +X103747547Y-84048611D01* +X103747547Y-84048609D01* +X103688242Y-83945891D01* +X103688240Y-83945889D01* +X103688239Y-83945887D01* +X103604363Y-83862011D01* +X103604360Y-83862009D01* +X103604358Y-83862007D01* +X103501639Y-83802702D01* +X103501640Y-83802702D01* +X103488101Y-83799074D01* +X103387059Y-83772000D01* +X103268441Y-83772000D01* +X103198317Y-83790789D01* +X103153859Y-83802702D01* +X103051141Y-83862007D01* +X102967257Y-83945891D01* +X102907952Y-84048609D01* +X102896446Y-84091550D01* +X102877250Y-84163191D01* +X100783328Y-84163191D01* +X100780949Y-84154314D01* +X100780947Y-84154311D01* +X100780947Y-84154309D01* +X100721642Y-84051591D01* +X100721640Y-84051589D01* +X100721639Y-84051587D01* +X100637763Y-83967711D01* +X100637760Y-83967709D01* +X100637758Y-83967707D01* +X100535039Y-83908402D01* +X100535040Y-83908402D01* +X100515585Y-83903189D01* +X100420459Y-83877700D01* +X100301841Y-83877700D01* +X100231717Y-83896489D01* +X100187259Y-83908402D01* +X100084541Y-83967707D01* +X100000657Y-84051591D01* +X99941352Y-84154309D01* +X99941351Y-84154314D01* +X99910650Y-84268891D01* +X94579982Y-84268891D01* +X94568949Y-84227714D01* +X94568947Y-84227711D01* +X94568947Y-84227709D01* +X94509642Y-84124991D01* +X94509640Y-84124989D01* +X94509639Y-84124987D01* +X94425763Y-84041111D01* +X94425760Y-84041109D01* +X94425758Y-84041107D01* +X94323039Y-83981802D01* +X94323040Y-83981802D01* +X94309501Y-83978174D01* +X94208459Y-83951100D01* +X94089841Y-83951100D01* +X94019717Y-83969889D01* +X93975259Y-83981802D01* +X93872541Y-84041107D01* +X93788657Y-84124991D01* +X93729352Y-84227709D01* +X93716382Y-84276114D01* +X93698650Y-84342291D01* +X80805913Y-84342291D01* +X80805907Y-84335902D01* +X80805045Y-83483391D01* +X130868850Y-83483391D01* +X130868850Y-83602009D01* +X130872834Y-83616876D01* +X130899552Y-83716590D01* +X130958857Y-83819308D01* +X130958859Y-83819310D01* +X130958861Y-83819313D01* +X131042737Y-83903189D01* +X131042739Y-83903190D01* +X131042741Y-83903192D01* +X131145460Y-83962497D01* +X131145461Y-83962497D01* +X131145464Y-83962499D01* +X131260041Y-83993200D01* +X131260043Y-83993200D01* +X131378657Y-83993200D01* +X131378659Y-83993200D01* +X131493236Y-83962499D01* +X131493238Y-83962497D01* +X131493240Y-83962497D01* +X131595958Y-83903192D01* +X131595958Y-83903191D01* +X131595963Y-83903189D01* +X131679839Y-83819313D01* +X131680513Y-83818146D01* +X131739147Y-83716590D01* +X131739147Y-83716588D01* +X131739149Y-83716586D01* +X131769850Y-83602009D01* +X131769850Y-83483391D01* +X131739149Y-83368814D01* +X131739147Y-83368811D01* +X131739147Y-83368809D01* +X131679842Y-83266091D01* +X131679840Y-83266089D01* +X131679839Y-83266087D01* +X131595963Y-83182211D01* +X131595960Y-83182209D01* +X131595958Y-83182207D01* +X131493239Y-83122902D01* +X131493240Y-83122902D01* +X131451116Y-83111615D01* +X131378659Y-83092200D01* +X131260041Y-83092200D01* +X131213932Y-83104555D01* +X131145459Y-83122902D01* +X131042741Y-83182207D01* +X130958857Y-83266091D01* +X130899552Y-83368809D01* +X130899551Y-83368814D01* +X130868850Y-83483391D01* +X80805045Y-83483391D01* +X80805039Y-83477002D01* +X80804297Y-82743791D01* +X97401150Y-82743791D01* +X97401150Y-82862409D01* +X97412403Y-82904405D01* +X97431852Y-82976990D01* +X97491157Y-83079708D01* +X97491159Y-83079710D01* +X97491161Y-83079713D01* +X97575037Y-83163589D01* +X97575039Y-83163590D01* +X97575041Y-83163592D01* +X97677760Y-83222897D01* +X97677761Y-83222897D01* +X97677764Y-83222899D01* +X97792341Y-83253600D01* +X97792343Y-83253600D01* +X97910957Y-83253600D01* +X97910959Y-83253600D01* +X98025536Y-83222899D01* +X98025538Y-83222897D01* +X98025540Y-83222897D01* +X98128258Y-83163592D01* +X98128258Y-83163591D01* +X98128263Y-83163589D01* +X98212139Y-83079713D01* +X98218089Y-83069407D01* +X98271447Y-82976990D01* +X98271447Y-82976988D01* +X98271449Y-82976986D01* +X98302150Y-82862409D01* +X98302150Y-82743791D01* +X98271449Y-82629214D01* +X98271447Y-82629211D01* +X98271447Y-82629209D01* +X98212142Y-82526491D01* +X98212140Y-82526489D01* +X98212139Y-82526487D01* +X98128263Y-82442611D01* +X98128260Y-82442609D01* +X98128258Y-82442607D01* +X98025539Y-82383302D01* +X98025540Y-82383302D01* +X98012001Y-82379674D01* +X97910959Y-82352600D01* +X97792341Y-82352600D01* +X97734088Y-82368209D01* +X97677759Y-82383302D01* +X97575041Y-82442607D01* +X97491157Y-82526491D01* +X97431852Y-82629209D01* +X97431851Y-82629214D01* +X97401150Y-82743791D01* +X80804297Y-82743791D01* +X80804291Y-82737402D01* +X80802766Y-81229481D01* +X105161150Y-81229481D01* +X105161150Y-81416718D01* +X105197676Y-81600349D01* +X105269327Y-81773329D01* +X105269331Y-81773338D01* +X105325965Y-81858095D01* +X105373348Y-81929008D01* +X105505742Y-82061402D01* +X105572113Y-82105749D01* +X105661411Y-82165418D01* +X105661417Y-82165420D01* +X105661419Y-82165422D01* +X105834399Y-82237073D01* +X106018034Y-82273600D01* +X106018035Y-82273600D01* +X106205265Y-82273600D01* +X106205266Y-82273600D01* +X106325968Y-82249591D01* +X107203950Y-82249591D01* +X107203950Y-82368209D01* +X107221064Y-82432079D01* +X107234652Y-82482790D01* +X107293957Y-82585508D01* +X107293959Y-82585510D01* +X107293961Y-82585513D01* +X107377837Y-82669389D01* +X107377839Y-82669390D01* +X107377841Y-82669392D01* +X107480560Y-82728697D01* +X107480561Y-82728697D01* +X107480564Y-82728699D01* +X107595141Y-82759400D01* +X107595143Y-82759400D01* +X107713757Y-82759400D01* +X107713759Y-82759400D01* +X107828336Y-82728699D01* +X107828338Y-82728697D01* +X107828340Y-82728697D01* +X107931058Y-82669392D01* +X107931058Y-82669391D01* +X107931063Y-82669389D01* +X108014939Y-82585513D01* +X108035731Y-82549500D01* +X108074247Y-82482790D01* +X108074247Y-82482788D01* +X108074249Y-82482786D01* +X108104950Y-82368209D01* +X108104950Y-82273627D01* +X108123857Y-82215436D01* +X108173357Y-82179472D01* +X108234543Y-82179472D01* +X108241828Y-82182160D01* +X108374399Y-82237073D01* +X108558034Y-82273600D01* +X108558035Y-82273600D01* +X108745265Y-82273600D01* +X108745266Y-82273600D01* +X108928901Y-82237073D01* +X109101881Y-82165422D01* +X109101884Y-82165419D01* +X109101888Y-82165418D01* +X109147397Y-82135009D01* +X109257558Y-82061402D01* +X109389952Y-81929008D01* +X109483486Y-81789025D01* +X109493968Y-81773338D01* +X109493969Y-81773334D01* +X109493972Y-81773331D01* +X109565623Y-81600351D01* +X109602150Y-81416716D01* +X109602150Y-81229484D01* +X109602149Y-81229481D01* +X110241150Y-81229481D01* +X110241150Y-81416718D01* +X110277676Y-81600349D01* +X110349327Y-81773329D01* +X110349331Y-81773338D01* +X110405965Y-81858095D01* +X110453348Y-81929008D01* +X110585742Y-82061402D01* +X110652113Y-82105749D01* +X110741411Y-82165418D01* +X110741417Y-82165420D01* +X110741419Y-82165422D01* +X110914399Y-82237073D01* +X111098034Y-82273600D01* +X111098035Y-82273600D01* +X111285265Y-82273600D01* +X111285266Y-82273600D01* +X111468901Y-82237073D01* +X111641881Y-82165422D01* +X111641884Y-82165419D01* +X111641888Y-82165418D01* +X111687397Y-82135009D01* +X111797558Y-82061402D01* +X111929952Y-81929008D01* +X112023486Y-81789025D01* +X112033968Y-81773338D01* +X112033969Y-81773334D01* +X112033972Y-81773331D01* +X112105623Y-81600351D01* +X112142150Y-81416716D01* +X112142150Y-81229484D01* +X112111043Y-81073099D01* +X112455040Y-81073099D01* +X112455041Y-81073100D01* +X113298638Y-81073100D01* +X113265725Y-81130107D01* +X113231650Y-81257274D01* +X113231650Y-81388926D01* +X113265725Y-81516093D01* +X113298638Y-81573100D01* +X112455040Y-81573100D01* +X112463659Y-81627514D01* +X112526893Y-81822127D01* +X112619788Y-82004446D01* +X112740064Y-82169991D01* +X112884758Y-82314685D01* +X113050303Y-82434961D01* +X113232622Y-82527856D01* +X113427239Y-82591091D01* +X113427235Y-82591091D01* +X113481649Y-82599708D01* +X113481650Y-82599707D01* +X113481650Y-81756112D01* +X113538657Y-81789025D01* +X113665824Y-81823100D01* +X113797476Y-81823100D01* +X113924643Y-81789025D01* +X113981650Y-81756112D01* +X113981650Y-82599708D01* +X114036062Y-82591091D01* +X114230677Y-82527856D01* +X114412996Y-82434961D01* +X114578541Y-82314685D01* +X114723235Y-82169991D01* +X114843511Y-82004446D01* +X114936406Y-81822127D01* +X114999640Y-81627514D01* +X115008259Y-81573100D01* +X114164662Y-81573100D01* +X114197575Y-81516093D01* +X114231650Y-81388926D01* +X114231650Y-81257274D01* +X114224203Y-81229481D01* +X115321150Y-81229481D01* +X115321150Y-81416718D01* +X115357676Y-81600349D01* +X115429327Y-81773329D01* +X115429331Y-81773338D01* +X115485965Y-81858095D01* +X115533348Y-81929008D01* +X115665742Y-82061402D01* +X115732113Y-82105749D01* +X115821411Y-82165418D01* +X115821417Y-82165420D01* +X115821419Y-82165422D01* +X115994399Y-82237073D01* +X116178034Y-82273600D01* +X116178035Y-82273600D01* +X116365265Y-82273600D01* +X116365266Y-82273600D01* +X116548901Y-82237073D01* +X116721881Y-82165422D01* +X116721884Y-82165419D01* +X116721888Y-82165418D01* +X116767397Y-82135009D01* +X116877558Y-82061402D01* +X117009952Y-81929008D01* +X117103486Y-81789025D01* +X117113968Y-81773338D01* +X117113969Y-81773334D01* +X117113972Y-81773331D01* +X117185623Y-81600351D01* +X117222150Y-81416716D01* +X117222150Y-81229484D01* +X117222149Y-81229481D01* +X117861150Y-81229481D01* +X117861150Y-81416718D01* +X117897676Y-81600349D01* +X117969327Y-81773329D01* +X117969331Y-81773338D01* +X118025965Y-81858095D01* +X118073348Y-81929008D01* +X118205742Y-82061402D01* +X118272113Y-82105749D01* +X118361411Y-82165418D01* +X118361417Y-82165420D01* +X118361419Y-82165422D01* +X118534399Y-82237073D01* +X118718034Y-82273600D01* +X118718035Y-82273600D01* +X118905265Y-82273600D01* +X118905266Y-82273600D01* +X119088901Y-82237073D01* +X119261881Y-82165422D01* +X119261884Y-82165419D01* +X119261888Y-82165418D01* +X119307397Y-82135009D01* +X119417558Y-82061402D01* +X119549952Y-81929008D01* +X119643486Y-81789025D01* +X119653968Y-81773338D01* +X119653969Y-81773334D01* +X119653972Y-81773331D01* +X119725623Y-81600351D01* +X119762150Y-81416716D01* +X119762150Y-81229484D01* +X119762149Y-81229481D01* +X120401150Y-81229481D01* +X120401150Y-81416718D01* +X120437676Y-81600349D01* +X120509327Y-81773329D01* +X120509331Y-81773338D01* +X120565965Y-81858095D01* +X120613348Y-81929008D01* +X120745742Y-82061402D01* +X120812113Y-82105749D01* +X120901411Y-82165418D01* +X120901417Y-82165420D01* +X120901419Y-82165422D01* +X121074399Y-82237073D01* +X121258034Y-82273600D01* +X121258035Y-82273600D01* +X121445265Y-82273600D01* +X121445266Y-82273600D01* +X121628901Y-82237073D01* +X121801881Y-82165422D01* +X121801884Y-82165419D01* +X121801888Y-82165418D01* +X121847397Y-82135009D01* +X121957558Y-82061402D01* +X122089952Y-81929008D01* +X122183486Y-81789025D01* +X122193968Y-81773338D01* +X122193969Y-81773334D01* +X122193972Y-81773331D01* +X122265623Y-81600351D01* +X122302150Y-81416716D01* +X122302150Y-81229484D01* +X122302149Y-81229481D01* +X122941150Y-81229481D01* +X122941150Y-81416718D01* +X122977676Y-81600349D01* +X123049327Y-81773329D01* +X123049331Y-81773338D01* +X123105965Y-81858095D01* +X123153348Y-81929008D01* +X123285742Y-82061402D01* +X123352113Y-82105749D01* +X123441411Y-82165418D01* +X123441417Y-82165420D01* +X123441419Y-82165422D01* +X123614399Y-82237073D01* +X123798034Y-82273600D01* +X123798035Y-82273600D01* +X123985265Y-82273600D01* +X123985266Y-82273600D01* +X124168901Y-82237073D01* +X124341881Y-82165422D01* +X124341884Y-82165419D01* +X124341888Y-82165418D01* +X124387397Y-82135009D01* +X124497558Y-82061402D01* +X124629952Y-81929008D01* +X124723486Y-81789025D01* +X124733968Y-81773338D01* +X124733969Y-81773334D01* +X124733972Y-81773331D01* +X124805623Y-81600351D01* +X124842150Y-81416716D01* +X124842150Y-81229484D01* +X124842149Y-81229481D01* +X125481150Y-81229481D01* +X125481150Y-81416718D01* +X125517676Y-81600349D01* +X125589327Y-81773329D01* +X125589331Y-81773338D01* +X125645965Y-81858095D01* +X125693348Y-81929008D01* +X125825742Y-82061402D01* +X125892113Y-82105749D01* +X125981411Y-82165418D01* +X125981417Y-82165420D01* +X125981419Y-82165422D01* +X126154399Y-82237073D01* +X126338034Y-82273600D01* +X126338035Y-82273600D01* +X126525265Y-82273600D01* +X126525266Y-82273600D01* +X126708901Y-82237073D01* +X126881881Y-82165422D01* +X126881884Y-82165419D01* +X126881888Y-82165418D01* +X126927397Y-82135009D01* +X127037558Y-82061402D01* +X127169952Y-81929008D01* +X127263486Y-81789025D01* +X127273968Y-81773338D01* +X127273969Y-81773334D01* +X127273972Y-81773331D01* +X127345623Y-81600351D01* +X127382150Y-81416716D01* +X127382150Y-81229484D01* +X127382149Y-81229481D01* +X128021150Y-81229481D01* +X128021150Y-81416718D01* +X128057676Y-81600349D01* +X128129327Y-81773329D01* +X128129331Y-81773338D01* +X128185965Y-81858095D01* +X128233348Y-81929008D01* +X128365742Y-82061402D01* +X128432113Y-82105749D01* +X128521411Y-82165418D01* +X128521417Y-82165420D01* +X128521419Y-82165422D01* +X128694399Y-82237073D01* +X128878034Y-82273600D01* +X128878035Y-82273600D01* +X129065265Y-82273600D01* +X129065266Y-82273600D01* +X129248901Y-82237073D01* +X129421881Y-82165422D01* +X129421884Y-82165419D01* +X129421888Y-82165418D01* +X129467397Y-82135009D01* +X129577558Y-82061402D01* +X129709952Y-81929008D01* +X129803486Y-81789025D01* +X129813968Y-81773338D01* +X129813969Y-81773334D01* +X129813972Y-81773331D01* +X129885623Y-81600351D01* +X129922150Y-81416716D01* +X129922150Y-81229484D01* +X129922149Y-81229481D01* +X132081150Y-81229481D01* +X132081150Y-81416718D01* +X132117676Y-81600349D01* +X132189327Y-81773329D01* +X132189331Y-81773338D01* +X132245965Y-81858095D01* +X132293348Y-81929008D01* +X132425742Y-82061402D01* +X132492113Y-82105749D01* +X132581411Y-82165418D01* +X132581417Y-82165420D01* +X132581419Y-82165422D01* +X132754399Y-82237073D01* +X132938034Y-82273600D01* +X132938035Y-82273600D01* +X133125265Y-82273600D01* +X133125266Y-82273600D01* +X133308901Y-82237073D01* +X133481881Y-82165422D01* +X133481884Y-82165419D01* +X133481888Y-82165418D01* +X133527397Y-82135009D01* +X133637558Y-82061402D01* +X133769952Y-81929008D01* +X133863486Y-81789025D01* +X133873968Y-81773338D01* +X133873969Y-81773334D01* +X133873972Y-81773331D01* +X133945623Y-81600351D01* +X133982150Y-81416716D01* +X133982150Y-81229484D01* +X133982149Y-81229481D01* +X134621150Y-81229481D01* +X134621150Y-81416718D01* +X134657676Y-81600349D01* +X134729327Y-81773329D01* +X134729331Y-81773338D01* +X134785965Y-81858095D01* +X134833348Y-81929008D01* +X134965742Y-82061402D01* +X135032113Y-82105749D01* +X135121411Y-82165418D01* +X135121417Y-82165420D01* +X135121419Y-82165422D01* +X135294399Y-82237073D01* +X135478034Y-82273600D01* +X135478035Y-82273600D01* +X135665265Y-82273600D01* +X135665266Y-82273600D01* +X135848901Y-82237073D01* +X136021881Y-82165422D01* +X136021884Y-82165419D01* +X136021888Y-82165418D01* +X136067397Y-82135009D01* +X136177558Y-82061402D01* +X136309952Y-81929008D01* +X136403486Y-81789025D01* +X136413968Y-81773338D01* +X136413969Y-81773334D01* +X136413972Y-81773331D01* +X136485623Y-81600351D01* +X136522150Y-81416716D01* +X136522150Y-81229484D01* +X136522149Y-81229481D01* +X137161150Y-81229481D01* +X137161150Y-81416718D01* +X137197676Y-81600349D01* +X137269327Y-81773329D01* +X137269331Y-81773338D01* +X137325965Y-81858095D01* +X137373348Y-81929008D01* +X137505742Y-82061402D01* +X137572113Y-82105749D01* +X137661411Y-82165418D01* +X137661417Y-82165420D01* +X137661419Y-82165422D01* +X137834399Y-82237073D01* +X138018034Y-82273600D01* +X138018035Y-82273600D01* +X138205265Y-82273600D01* +X138205266Y-82273600D01* +X138388901Y-82237073D01* +X138561881Y-82165422D01* +X138561884Y-82165419D01* +X138561888Y-82165418D01* +X138607397Y-82135009D01* +X138717558Y-82061402D01* +X138849952Y-81929008D01* +X138943486Y-81789025D01* +X138953968Y-81773338D01* +X138953969Y-81773334D01* +X138953972Y-81773331D01* +X139025623Y-81600351D01* +X139062150Y-81416716D01* +X139062150Y-81229484D01* +X139062149Y-81229481D01* +X139701150Y-81229481D01* +X139701150Y-81416718D01* +X139737676Y-81600349D01* +X139809327Y-81773329D01* +X139809331Y-81773338D01* +X139865965Y-81858095D01* +X139913348Y-81929008D01* +X140045742Y-82061402D01* +X140112113Y-82105749D01* +X140201411Y-82165418D01* +X140201417Y-82165420D01* +X140201419Y-82165422D01* +X140374399Y-82237073D01* +X140558034Y-82273600D01* +X140558035Y-82273600D01* +X140745265Y-82273600D01* +X140745266Y-82273600D01* +X140928901Y-82237073D01* +X141101881Y-82165422D01* +X141101884Y-82165419D01* +X141101888Y-82165418D01* +X141147397Y-82135009D01* +X141257558Y-82061402D01* +X141389952Y-81929008D01* +X141483486Y-81789025D01* +X141493968Y-81773338D01* +X141493969Y-81773334D01* +X141493972Y-81773331D01* +X141565623Y-81600351D01* +X141602150Y-81416716D01* +X141602150Y-81229484D01* +X141602149Y-81229481D01* +X142241150Y-81229481D01* +X142241150Y-81416718D01* +X142277676Y-81600349D01* +X142349327Y-81773329D01* +X142349331Y-81773338D01* +X142405965Y-81858095D01* +X142453348Y-81929008D01* +X142585742Y-82061402D01* +X142652113Y-82105749D01* +X142741411Y-82165418D01* +X142741417Y-82165420D01* +X142741419Y-82165422D01* +X142914399Y-82237073D01* +X143098034Y-82273600D01* +X143098035Y-82273600D01* +X143285265Y-82273600D01* +X143285266Y-82273600D01* +X143468901Y-82237073D01* +X143641881Y-82165422D01* +X143641884Y-82165419D01* +X143641888Y-82165418D01* +X143687397Y-82135009D01* +X143797558Y-82061402D01* +X143929952Y-81929008D01* +X144023486Y-81789025D01* +X144033968Y-81773338D01* +X144033969Y-81773334D01* +X144033972Y-81773331D01* +X144105623Y-81600351D01* +X144142150Y-81416716D01* +X144142150Y-81229484D01* +X144142149Y-81229481D01* +X144781150Y-81229481D01* +X144781150Y-81416718D01* +X144817676Y-81600349D01* +X144889327Y-81773329D01* +X144889331Y-81773338D01* +X144945965Y-81858095D01* +X144993348Y-81929008D01* +X145125742Y-82061402D01* +X145192113Y-82105749D01* +X145281411Y-82165418D01* +X145281417Y-82165420D01* +X145281419Y-82165422D01* +X145454399Y-82237073D01* +X145638034Y-82273600D01* +X145638035Y-82273600D01* +X145825265Y-82273600D01* +X145825266Y-82273600D01* +X146008901Y-82237073D01* +X146181881Y-82165422D01* +X146181884Y-82165419D01* +X146181888Y-82165418D01* +X146227397Y-82135009D01* +X146337558Y-82061402D01* +X146469952Y-81929008D01* +X146563486Y-81789025D01* +X146573968Y-81773338D01* +X146573969Y-81773334D01* +X146573972Y-81773331D01* +X146645623Y-81600351D01* +X146682150Y-81416716D01* +X146682150Y-81229484D01* +X146682149Y-81229481D01* +X147321150Y-81229481D01* +X147321150Y-81416718D01* +X147357676Y-81600349D01* +X147429327Y-81773329D01* +X147429331Y-81773338D01* +X147485965Y-81858095D01* +X147533348Y-81929008D01* +X147665742Y-82061402D01* +X147732113Y-82105749D01* +X147821411Y-82165418D01* +X147821417Y-82165420D01* +X147821419Y-82165422D01* +X147994399Y-82237073D01* +X148178034Y-82273600D01* +X148178035Y-82273600D01* +X148365265Y-82273600D01* +X148365266Y-82273600D01* +X148548901Y-82237073D01* +X148721881Y-82165422D01* +X148721884Y-82165419D01* +X148721888Y-82165418D01* +X148767397Y-82135009D01* +X148877558Y-82061402D01* +X149009952Y-81929008D01* +X149103486Y-81789025D01* +X149113968Y-81773338D01* +X149113969Y-81773334D01* +X149113972Y-81773331D01* +X149185623Y-81600351D01* +X149222150Y-81416716D01* +X149222150Y-81229484D01* +X149222149Y-81229481D01* +X149861150Y-81229481D01* +X149861150Y-81416718D01* +X149897676Y-81600349D01* +X149969327Y-81773329D01* +X149969331Y-81773338D01* +X150025965Y-81858095D01* +X150073348Y-81929008D01* +X150205742Y-82061402D01* +X150272113Y-82105749D01* +X150361411Y-82165418D01* +X150361417Y-82165420D01* +X150361419Y-82165422D01* +X150534399Y-82237073D01* +X150718034Y-82273600D01* +X150718035Y-82273600D01* +X150905265Y-82273600D01* +X150905266Y-82273600D01* +X151088901Y-82237073D01* +X151261881Y-82165422D01* +X151261884Y-82165419D01* +X151261888Y-82165418D01* +X151307397Y-82135009D01* +X151417558Y-82061402D01* +X151549952Y-81929008D01* +X151643486Y-81789025D01* +X151653968Y-81773338D01* +X151653969Y-81773334D01* +X151653972Y-81773331D01* +X151725623Y-81600351D01* +X151762150Y-81416716D01* +X151762150Y-81229484D01* +X151725623Y-81045849D01* +X151653972Y-80872869D01* +X151653970Y-80872866D01* +X151653968Y-80872862D01* +X151593080Y-80781738D01* +X151585530Y-80770439D01* +X151549952Y-80717192D01* +X151417558Y-80584798D01* +X151363854Y-80548914D01* +X151261888Y-80480781D01* +X151261879Y-80480777D01* +X151088899Y-80409126D01* +X150905268Y-80372600D01* +X150905266Y-80372600D01* +X150718034Y-80372600D01* +X150718031Y-80372600D01* +X150534400Y-80409126D01* +X150361420Y-80480777D01* +X150361411Y-80480781D01* +X150205742Y-80584798D01* +X150205738Y-80584801D01* +X150073351Y-80717188D01* +X150073348Y-80717192D01* +X149969331Y-80872861D01* +X149969327Y-80872870D01* +X149897676Y-81045850D01* +X149861150Y-81229481D01* +X149222149Y-81229481D01* +X149185623Y-81045849D01* +X149113972Y-80872869D01* +X149113970Y-80872867D01* +X149113968Y-80872861D01* +X149045530Y-80770439D01* +X149009952Y-80717192D01* +X148877558Y-80584798D01* +X148823854Y-80548914D01* +X148721888Y-80480781D01* +X148721879Y-80480777D01* +X148548899Y-80409126D01* +X148365268Y-80372600D01* +X148365266Y-80372600D01* +X148178034Y-80372600D01* +X148178031Y-80372600D01* +X147994400Y-80409126D01* +X147821420Y-80480777D01* +X147821411Y-80480781D01* +X147665742Y-80584798D01* +X147665738Y-80584801D01* +X147533351Y-80717188D01* +X147533348Y-80717192D01* +X147429331Y-80872861D01* +X147429327Y-80872870D01* +X147357676Y-81045850D01* +X147321150Y-81229481D01* +X146682149Y-81229481D01* +X146645623Y-81045849D01* +X146573972Y-80872869D01* +X146573970Y-80872867D01* +X146573968Y-80872861D01* +X146505530Y-80770439D01* +X146469952Y-80717192D01* +X146337558Y-80584798D01* +X146283854Y-80548914D01* +X146181888Y-80480781D01* +X146181879Y-80480777D01* +X146008899Y-80409126D01* +X145825268Y-80372600D01* +X145825266Y-80372600D01* +X145638034Y-80372600D01* +X145638031Y-80372600D01* +X145454400Y-80409126D01* +X145281420Y-80480777D01* +X145281411Y-80480781D01* +X145125742Y-80584798D01* +X145125738Y-80584801D01* +X144993351Y-80717188D01* +X144993348Y-80717192D01* +X144889331Y-80872861D01* +X144889327Y-80872870D01* +X144817676Y-81045850D01* +X144781150Y-81229481D01* +X144142149Y-81229481D01* +X144105623Y-81045849D01* +X144033972Y-80872869D01* +X144033970Y-80872867D01* +X144033968Y-80872861D01* +X143965530Y-80770439D01* +X143929952Y-80717192D01* +X143797558Y-80584798D01* +X143743854Y-80548914D01* +X143641888Y-80480781D01* +X143641879Y-80480777D01* +X143468899Y-80409126D01* +X143285268Y-80372600D01* +X143285266Y-80372600D01* +X143098034Y-80372600D01* +X143098031Y-80372600D01* +X142914400Y-80409126D01* +X142741420Y-80480777D01* +X142741411Y-80480781D01* +X142585742Y-80584798D01* +X142585738Y-80584801D01* +X142453351Y-80717188D01* +X142453348Y-80717192D01* +X142349331Y-80872861D01* +X142349327Y-80872870D01* +X142277676Y-81045850D01* +X142241150Y-81229481D01* +X141602149Y-81229481D01* +X141565623Y-81045849D01* +X141493972Y-80872869D01* +X141493970Y-80872867D01* +X141493968Y-80872861D01* +X141425530Y-80770439D01* +X141389952Y-80717192D01* +X141257558Y-80584798D01* +X141203854Y-80548914D01* +X141101888Y-80480781D01* +X141101879Y-80480777D01* +X140928899Y-80409126D01* +X140745268Y-80372600D01* +X140745266Y-80372600D01* +X140558034Y-80372600D01* +X140558031Y-80372600D01* +X140374400Y-80409126D01* +X140201420Y-80480777D01* +X140201411Y-80480781D01* +X140045742Y-80584798D01* +X140045738Y-80584801D01* +X139913351Y-80717188D01* +X139913348Y-80717192D01* +X139809331Y-80872861D01* +X139809327Y-80872870D01* +X139737676Y-81045850D01* +X139701150Y-81229481D01* +X139062149Y-81229481D01* +X139025623Y-81045849D01* +X138953972Y-80872869D01* +X138953970Y-80872867D01* +X138953968Y-80872861D01* +X138885530Y-80770439D01* +X138849952Y-80717192D01* +X138717558Y-80584798D01* +X138663854Y-80548914D01* +X138561888Y-80480781D01* +X138561879Y-80480777D01* +X138388899Y-80409126D01* +X138205268Y-80372600D01* +X138205266Y-80372600D01* +X138018034Y-80372600D01* +X138018031Y-80372600D01* +X137834400Y-80409126D01* +X137661420Y-80480777D01* +X137661411Y-80480781D01* +X137505742Y-80584798D01* +X137505738Y-80584801D01* +X137373351Y-80717188D01* +X137373348Y-80717192D01* +X137269331Y-80872861D01* +X137269327Y-80872870D01* +X137197676Y-81045850D01* +X137161150Y-81229481D01* +X136522149Y-81229481D01* +X136485623Y-81045849D01* +X136413972Y-80872869D01* +X136413970Y-80872867D01* +X136413968Y-80872861D01* +X136345530Y-80770439D01* +X136309952Y-80717192D01* +X136177558Y-80584798D01* +X136123854Y-80548914D01* +X136021888Y-80480781D01* +X136021879Y-80480777D01* +X135848899Y-80409126D01* +X135665268Y-80372600D01* +X135665266Y-80372600D01* +X135478034Y-80372600D01* +X135478031Y-80372600D01* +X135294400Y-80409126D01* +X135121420Y-80480777D01* +X135121411Y-80480781D01* +X134965742Y-80584798D01* +X134965738Y-80584801D01* +X134833351Y-80717188D01* +X134833348Y-80717192D01* +X134729331Y-80872861D01* +X134729327Y-80872870D01* +X134657676Y-81045850D01* +X134621150Y-81229481D01* +X133982149Y-81229481D01* +X133945623Y-81045849D01* +X133873972Y-80872869D01* +X133873970Y-80872867D01* +X133873968Y-80872861D01* +X133805530Y-80770439D01* +X133769952Y-80717192D01* +X133637558Y-80584798D01* +X133583854Y-80548914D01* +X133481888Y-80480781D01* +X133481879Y-80480777D01* +X133308899Y-80409126D01* +X133125268Y-80372600D01* +X133125266Y-80372600D01* +X132938034Y-80372600D01* +X132938031Y-80372600D01* +X132754400Y-80409126D01* +X132581420Y-80480777D01* +X132581411Y-80480781D01* +X132425742Y-80584798D01* +X132425738Y-80584801D01* +X132293351Y-80717188D01* +X132293348Y-80717192D01* +X132189331Y-80872861D01* +X132189327Y-80872870D01* +X132117676Y-81045850D01* +X132081150Y-81229481D01* +X129922149Y-81229481D01* +X129885623Y-81045849D01* +X129813972Y-80872869D01* +X129813970Y-80872867D01* +X129813968Y-80872861D01* +X129745530Y-80770439D01* +X129709952Y-80717192D01* +X129577558Y-80584798D01* +X129523854Y-80548914D01* +X129421888Y-80480781D01* +X129421879Y-80480777D01* +X129248899Y-80409126D01* +X129065268Y-80372600D01* +X129065266Y-80372600D01* +X128878034Y-80372600D01* +X128878031Y-80372600D01* +X128694400Y-80409126D01* +X128521420Y-80480777D01* +X128521411Y-80480781D01* +X128365742Y-80584798D01* +X128365738Y-80584801D01* +X128233351Y-80717188D01* +X128233348Y-80717192D01* +X128129331Y-80872861D01* +X128129327Y-80872870D01* +X128057676Y-81045850D01* +X128021150Y-81229481D01* +X127382149Y-81229481D01* +X127345623Y-81045849D01* +X127273972Y-80872869D01* +X127273970Y-80872867D01* +X127273968Y-80872861D01* +X127205530Y-80770439D01* +X127169952Y-80717192D01* +X127037558Y-80584798D01* +X126983854Y-80548914D01* +X126881888Y-80480781D01* +X126881879Y-80480777D01* +X126708899Y-80409126D01* +X126525268Y-80372600D01* +X126525266Y-80372600D01* +X126338034Y-80372600D01* +X126338031Y-80372600D01* +X126154400Y-80409126D01* +X125981420Y-80480777D01* +X125981411Y-80480781D01* +X125825742Y-80584798D01* +X125825738Y-80584801D01* +X125693351Y-80717188D01* +X125693348Y-80717192D01* +X125589331Y-80872861D01* +X125589327Y-80872870D01* +X125517676Y-81045850D01* +X125481150Y-81229481D01* +X124842149Y-81229481D01* +X124805623Y-81045849D01* +X124733972Y-80872869D01* +X124733970Y-80872867D01* +X124733968Y-80872861D01* +X124665530Y-80770439D01* +X124629952Y-80717192D01* +X124497558Y-80584798D01* +X124443854Y-80548914D01* +X124341888Y-80480781D01* +X124341879Y-80480777D01* +X124168899Y-80409126D01* +X123985268Y-80372600D01* +X123985266Y-80372600D01* +X123798034Y-80372600D01* +X123798031Y-80372600D01* +X123614400Y-80409126D01* +X123441420Y-80480777D01* +X123441411Y-80480781D01* +X123285742Y-80584798D01* +X123285738Y-80584801D01* +X123153351Y-80717188D01* +X123153348Y-80717192D01* +X123049331Y-80872861D01* +X123049327Y-80872870D01* +X122977676Y-81045850D01* +X122941150Y-81229481D01* +X122302149Y-81229481D01* +X122265623Y-81045849D01* +X122193972Y-80872869D01* +X122193970Y-80872867D01* +X122193968Y-80872861D01* +X122125530Y-80770439D01* +X122089952Y-80717192D01* +X121957558Y-80584798D01* +X121903854Y-80548914D01* +X121801888Y-80480781D01* +X121801879Y-80480777D01* +X121628899Y-80409126D01* +X121445268Y-80372600D01* +X121445266Y-80372600D01* +X121258034Y-80372600D01* +X121258031Y-80372600D01* +X121074400Y-80409126D01* +X120901420Y-80480777D01* +X120901411Y-80480781D01* +X120745742Y-80584798D01* +X120745738Y-80584801D01* +X120613351Y-80717188D01* +X120613348Y-80717192D01* +X120509331Y-80872861D01* +X120509327Y-80872870D01* +X120437676Y-81045850D01* +X120401150Y-81229481D01* +X119762149Y-81229481D01* +X119725623Y-81045849D01* +X119653972Y-80872869D01* +X119653970Y-80872867D01* +X119653968Y-80872861D01* +X119585530Y-80770439D01* +X119549952Y-80717192D01* +X119417558Y-80584798D01* +X119363854Y-80548914D01* +X119261888Y-80480781D01* +X119261879Y-80480777D01* +X119088899Y-80409126D01* +X118905268Y-80372600D01* +X118905266Y-80372600D01* +X118718034Y-80372600D01* +X118718031Y-80372600D01* +X118534400Y-80409126D01* +X118361420Y-80480777D01* +X118361411Y-80480781D01* +X118205742Y-80584798D01* +X118205738Y-80584801D01* +X118073351Y-80717188D01* +X118073348Y-80717192D01* +X117969331Y-80872861D01* +X117969327Y-80872870D01* +X117897676Y-81045850D01* +X117861150Y-81229481D01* +X117222149Y-81229481D01* +X117185623Y-81045849D01* +X117113972Y-80872869D01* +X117113970Y-80872867D01* +X117113968Y-80872861D01* +X117045530Y-80770439D01* +X117009952Y-80717192D01* +X116877558Y-80584798D01* +X116823854Y-80548914D01* +X116721888Y-80480781D01* +X116721879Y-80480777D01* +X116548899Y-80409126D01* +X116365268Y-80372600D01* +X116365266Y-80372600D01* +X116178034Y-80372600D01* +X116178031Y-80372600D01* +X115994400Y-80409126D01* +X115821420Y-80480777D01* +X115821411Y-80480781D01* +X115665742Y-80584798D01* +X115665738Y-80584801D01* +X115533351Y-80717188D01* +X115533348Y-80717192D01* +X115429331Y-80872861D01* +X115429327Y-80872870D01* +X115357676Y-81045850D01* +X115321150Y-81229481D01* +X114224203Y-81229481D01* +X114197575Y-81130107D01* +X114164662Y-81073100D01* +X115008259Y-81073100D01* +X115008259Y-81073099D01* +X114999640Y-81018685D01* +X114936406Y-80824072D01* +X114843511Y-80641753D01* +X114723235Y-80476208D01* +X114578541Y-80331514D01* +X114412996Y-80211238D01* +X114230677Y-80118343D01* +X114036064Y-80055109D01* +X113981650Y-80046490D01* +X113981650Y-80890088D01* +X113924643Y-80857175D01* +X113797476Y-80823100D01* +X113665824Y-80823100D01* +X113538657Y-80857175D01* +X113481650Y-80890088D01* +X113481650Y-80046491D01* +X113481649Y-80046490D01* +X113427235Y-80055109D01* +X113232622Y-80118343D01* +X113050303Y-80211238D01* +X112884758Y-80331514D01* +X112740064Y-80476208D01* +X112619788Y-80641753D01* +X112526893Y-80824072D01* +X112463659Y-81018685D01* +X112455040Y-81073099D01* +X112111043Y-81073099D01* +X112105623Y-81045849D01* +X112033972Y-80872869D01* +X112033970Y-80872867D01* +X112033968Y-80872861D01* +X111965530Y-80770439D01* +X111929952Y-80717192D01* +X111797558Y-80584798D01* +X111743854Y-80548914D01* +X111641888Y-80480781D01* +X111641879Y-80480777D01* +X111468899Y-80409126D01* +X111285268Y-80372600D01* +X111285266Y-80372600D01* +X111098034Y-80372600D01* +X111098031Y-80372600D01* +X110914400Y-80409126D01* +X110741420Y-80480777D01* +X110741411Y-80480781D01* +X110585742Y-80584798D01* +X110585738Y-80584801D01* +X110453351Y-80717188D01* +X110453348Y-80717192D01* +X110349331Y-80872861D01* +X110349327Y-80872870D01* +X110277676Y-81045850D01* +X110241150Y-81229481D01* +X109602149Y-81229481D01* +X109565623Y-81045849D01* +X109493972Y-80872869D01* +X109493970Y-80872867D01* +X109493968Y-80872861D01* +X109425530Y-80770439D01* +X109389952Y-80717192D01* +X109257558Y-80584798D01* +X109203854Y-80548914D01* +X109101888Y-80480781D01* +X109101879Y-80480777D01* +X108928899Y-80409126D01* +X108745268Y-80372600D01* +X108745266Y-80372600D01* +X108558034Y-80372600D01* +X108558031Y-80372600D01* +X108374400Y-80409126D01* +X108201420Y-80480777D01* +X108201411Y-80480781D01* +X108045742Y-80584798D01* +X108045738Y-80584801D01* +X107913351Y-80717188D01* +X107913348Y-80717192D01* +X107809331Y-80872861D01* +X107809327Y-80872870D01* +X107737676Y-81045850D01* +X107701150Y-81229481D01* +X107701150Y-81416718D01* +X107737676Y-81600349D01* +X107737677Y-81600351D01* +X107757662Y-81648600D01* +X107787865Y-81721514D01* +X107792666Y-81782511D01* +X107760696Y-81834680D01* +X107704169Y-81858095D01* +X107696401Y-81858400D01* +X107595141Y-81858400D01* +X107525017Y-81877189D01* +X107480559Y-81889102D01* +X107377841Y-81948407D01* +X107293957Y-82032291D01* +X107234652Y-82135009D01* +X107234651Y-82135014D01* +X107203950Y-82249591D01* +X106325968Y-82249591D01* +X106388901Y-82237073D01* +X106561881Y-82165422D01* +X106561884Y-82165419D01* +X106561888Y-82165418D01* +X106568819Y-82160787D01* +X106617890Y-82127997D01* +X106717558Y-82061402D01* +X106849952Y-81929008D01* +X106943486Y-81789025D01* +X106953968Y-81773338D01* +X106953969Y-81773334D01* +X106953972Y-81773331D01* +X107025623Y-81600351D01* +X107062150Y-81416716D01* +X107062150Y-81229484D01* +X107025623Y-81045849D01* +X106953972Y-80872869D01* +X106953970Y-80872867D01* +X106953968Y-80872861D01* +X106885530Y-80770439D01* +X106849952Y-80717192D01* +X106717558Y-80584798D01* +X106663854Y-80548914D01* +X106561888Y-80480781D01* +X106561879Y-80480777D01* +X106388899Y-80409126D01* +X106205268Y-80372600D01* +X106205266Y-80372600D01* +X106018034Y-80372600D01* +X106018031Y-80372600D01* +X105834400Y-80409126D01* +X105661420Y-80480777D01* +X105661411Y-80480781D01* +X105505742Y-80584798D01* +X105505738Y-80584801D01* +X105373351Y-80717188D01* +X105373348Y-80717192D01* +X105269331Y-80872861D01* +X105269327Y-80872870D01* +X105197676Y-81045850D01* +X105161150Y-81229481D01* +X80802766Y-81229481D01* +X80802194Y-80663491D01* +X102425550Y-80663491D01* +X102425550Y-80782109D01* +X102450644Y-80875761D01* +X102456252Y-80896690D01* +X102515557Y-80999408D01* +X102515559Y-80999410D01* +X102515561Y-80999413D01* +X102599437Y-81083289D01* +X102599439Y-81083290D01* +X102599441Y-81083292D01* +X102702160Y-81142597D01* +X102702161Y-81142597D01* +X102702164Y-81142599D01* +X102816741Y-81173300D01* +X102816743Y-81173300D01* +X102935357Y-81173300D01* +X102935359Y-81173300D01* +X103049936Y-81142599D01* +X103049938Y-81142597D01* +X103049940Y-81142597D01* +X103056372Y-81138884D01* +X103152658Y-81083292D01* +X103152658Y-81083291D01* +X103152663Y-81083289D01* +X103236539Y-80999413D01* +X103287331Y-80911440D01* +X103295847Y-80896690D01* +X103295847Y-80896688D01* +X103295849Y-80896686D01* +X103326550Y-80782109D01* +X103326550Y-80663491D01* +X103295849Y-80548914D01* +X103295847Y-80548911D01* +X103295847Y-80548909D01* +X103236542Y-80446191D01* +X103236540Y-80446189D01* +X103236539Y-80446187D01* +X103152663Y-80362311D01* +X103152660Y-80362309D01* +X103152658Y-80362307D01* +X103049939Y-80303002D01* +X103049940Y-80303002D01* +X103027085Y-80296878D01* +X102935359Y-80272300D01* +X102816741Y-80272300D01* +X102746617Y-80291089D01* +X102702159Y-80303002D01* +X102599441Y-80362307D01* +X102515557Y-80446191D01* +X102456252Y-80548909D01* +X102456251Y-80548914D01* +X102425550Y-80663491D01* +X80802194Y-80663491D01* +X80802188Y-80657102D01* +X80800120Y-78611791D01* +X96182150Y-78611791D01* +X96182150Y-78730409D01* +X96197162Y-78786433D01* +X96212852Y-78844990D01* +X96272157Y-78947708D01* +X96272159Y-78947710D01* +X96272161Y-78947713D01* +X96356037Y-79031589D01* +X96356039Y-79031590D01* +X96356041Y-79031592D01* +X96458760Y-79090897D01* +X96458761Y-79090897D01* +X96458764Y-79090899D01* +X96573341Y-79121600D01* +X96573343Y-79121600D01* +X96691957Y-79121600D01* +X96691959Y-79121600D01* +X96806536Y-79090899D01* +X96806538Y-79090897D01* +X96806540Y-79090897D01* +X96909258Y-79031592D01* +X96909258Y-79031591D01* +X96909263Y-79031589D01* +X96969861Y-78970991D01* +X166347550Y-78970991D01* +X166347550Y-79089609D01* +X166374624Y-79190651D01* +X166378252Y-79204190D01* +X166437557Y-79306908D01* +X166437559Y-79306910D01* +X166437561Y-79306913D01* +X166521437Y-79390789D01* +X166521439Y-79390790D01* +X166521441Y-79390792D01* +X166624160Y-79450097D01* +X166624161Y-79450097D01* +X166624164Y-79450099D01* +X166738741Y-79480800D01* +X166738743Y-79480800D01* +X166857357Y-79480800D01* +X166857359Y-79480800D01* +X166971936Y-79450099D01* +X166971938Y-79450097D01* +X166971940Y-79450097D01* +X167074658Y-79390792D01* +X167074658Y-79390791D01* +X167074663Y-79390789D01* +X167158539Y-79306913D01* +X167217849Y-79204186D01* +X167248550Y-79089609D01* +X167248550Y-78970991D01* +X167217849Y-78856414D01* +X167217847Y-78856411D01* +X167217847Y-78856409D01* +X167177446Y-78786433D01* +X167177445Y-78786432D01* +X167158540Y-78753689D01* +X167158539Y-78753687D01* +X167074663Y-78669811D01* +X167074660Y-78669809D01* +X167074658Y-78669807D01* +X166971939Y-78610502D01* +X166971940Y-78610502D01* +X166952906Y-78605402D01* +X166857359Y-78579800D01* +X166738741Y-78579800D01* +X166668617Y-78598589D01* +X166624159Y-78610502D01* +X166521441Y-78669807D01* +X166437557Y-78753691D01* +X166378252Y-78856409D01* +X166378251Y-78856414D01* +X166347550Y-78970991D01* +X96969861Y-78970991D01* +X96993139Y-78947713D01* +X97011790Y-78915409D01* +X97012026Y-78915001D01* +X97012027Y-78914999D01* +X97052447Y-78844990D01* +X97052447Y-78844988D01* +X97052449Y-78844986D01* +X97083150Y-78730409D01* +X97083150Y-78611791D01* +X97052449Y-78497214D01* +X97052447Y-78497211D01* +X97052447Y-78497209D01* +X96993142Y-78394491D01* +X96993140Y-78394489D01* +X96993139Y-78394487D01* +X96909263Y-78310611D01* +X96909260Y-78310609D01* +X96909258Y-78310607D01* +X96806539Y-78251302D01* +X96806540Y-78251302D01* +X96793001Y-78247674D01* +X96691959Y-78220600D01* +X96573341Y-78220600D01* +X96503217Y-78239389D01* +X96458759Y-78251302D01* +X96356041Y-78310607D01* +X96272157Y-78394491D01* +X96212852Y-78497209D01* +X96212851Y-78497214D01* +X96182150Y-78611791D01* +X80800120Y-78611791D01* +X80800114Y-78605402D01* +X80799512Y-78009991D01* +X97707650Y-78009991D01* +X97707650Y-78128609D01* +X97732299Y-78220600D01* +X97738352Y-78243190D01* +X97797657Y-78345908D01* +X97797659Y-78345910D01* +X97797661Y-78345913D01* +X97881537Y-78429789D01* +X97881539Y-78429790D01* +X97881541Y-78429792D01* +X97984260Y-78489097D01* +X97984261Y-78489097D01* +X97984264Y-78489099D01* +X98098841Y-78519800D01* +X98098843Y-78519800D01* +X98217457Y-78519800D01* +X98217459Y-78519800D01* +X98332036Y-78489099D01* +X98332038Y-78489097D01* +X98332040Y-78489097D01* +X98434758Y-78429792D01* +X98434758Y-78429791D01* +X98434763Y-78429789D01* +X98518639Y-78345913D01* +X98546950Y-78296878D01* +X98577947Y-78243190D01* +X98577947Y-78243188D01* +X98577949Y-78243186D01* +X98608650Y-78128609D01* +X98608650Y-78009991D01* +X98577949Y-77895414D01* +X98577947Y-77895411D01* +X98577947Y-77895409D01* +X98534468Y-77820102D01* +X98518642Y-77792691D01* +X98518640Y-77792689D01* +X98518639Y-77792687D01* +X98503043Y-77777091D01* +X162882850Y-77777091D01* +X162882850Y-77895709D01* +X162903614Y-77973199D01* +X162913552Y-78010290D01* +X162972857Y-78113008D01* +X162972859Y-78113010D01* +X162972861Y-78113013D01* +X163056737Y-78196889D01* +X163056739Y-78196890D01* +X163056741Y-78196892D01* +X163159460Y-78256197D01* +X163159461Y-78256197D01* +X163159464Y-78256199D01* +X163274041Y-78286900D01* +X163274043Y-78286900D01* +X163392657Y-78286900D01* +X163392659Y-78286900D01* +X163507236Y-78256199D01* +X163507238Y-78256197D01* +X163507240Y-78256197D01* +X163609958Y-78196892D01* +X163609958Y-78196891D01* +X163609963Y-78196889D01* +X163693839Y-78113013D01* +X163706231Y-78091550D01* +X163753147Y-78010290D01* +X163753147Y-78010288D01* +X163753149Y-78010286D01* +X163783850Y-77895709D01* +X163783850Y-77777091D01* +X163753149Y-77662514D01* +X163753147Y-77662511D01* +X163753147Y-77662509D01* +X163693842Y-77559791D01* +X163693840Y-77559789D01* +X163693839Y-77559787D01* +X163609963Y-77475911D01* +X163609960Y-77475909D01* +X163609958Y-77475907D01* +X163507239Y-77416602D01* +X163507240Y-77416602D01* +X163493701Y-77412974D01* +X163392659Y-77385900D01* +X163274041Y-77385900D01* +X163203917Y-77404689D01* +X163159459Y-77416602D01* +X163056741Y-77475907D01* +X162972857Y-77559791D01* +X162913552Y-77662509D01* +X162913551Y-77662514D01* +X162882850Y-77777091D01* +X98503043Y-77777091D01* +X98434763Y-77708811D01* +X98434760Y-77708809D01* +X98434758Y-77708807D01* +X98332039Y-77649502D01* +X98332040Y-77649502D01* +X98318501Y-77645874D01* +X98217459Y-77618800D01* +X98098841Y-77618800D01* +X98028717Y-77637589D01* +X97984259Y-77649502D01* +X97881541Y-77708807D01* +X97797657Y-77792691D01* +X97738352Y-77895409D01* +X97738351Y-77895414D01* +X97707650Y-78009991D01* +X80799512Y-78009991D01* +X80799506Y-78003602D01* +X80798613Y-77120791D01* +X101065250Y-77120791D01* +X101065250Y-77239409D01* +X101087675Y-77323099D01* +X101095952Y-77353990D01* +X101155257Y-77456708D01* +X101155259Y-77456710D01* +X101155261Y-77456713D01* +X101239137Y-77540589D01* +X101239139Y-77540590D01* +X101239141Y-77540592D01* +X101341860Y-77599897D01* +X101341861Y-77599897D01* +X101341864Y-77599899D01* +X101456441Y-77630600D01* +X101456443Y-77630600D01* +X101575057Y-77630600D01* +X101575059Y-77630600D01* +X101689636Y-77599899D01* +X101689638Y-77599897D01* +X101689640Y-77599897D01* +X101792358Y-77540592D01* +X101792358Y-77540591D01* +X101792363Y-77540589D01* +X101876239Y-77456713D01* +X101899398Y-77416601D01* +X101935547Y-77353990D01* +X101935547Y-77353988D01* +X101935549Y-77353986D01* +X101966250Y-77239409D01* +X101966250Y-77120791D01* +X101935549Y-77006214D01* +X101935547Y-77006211D01* +X101935547Y-77006209D01* +X101876242Y-76903491D01* +X101876240Y-76903489D01* +X101876239Y-76903487D01* +X101792363Y-76819611D01* +X101792356Y-76819607D01* +X101689638Y-76760302D01* +X101689637Y-76760301D01* +X101689636Y-76760301D01* +X101620567Y-76741794D01* +X173366150Y-76741794D01* +X173366150Y-76904405D01* +X173397874Y-77063890D01* +X173460100Y-77214118D01* +X173460101Y-77214120D01* +X173460102Y-77214121D01* +X173550442Y-77349325D01* +X173665425Y-77464308D01* +X173800629Y-77554648D01* +X173800630Y-77554648D01* +X173800631Y-77554649D01* +X173813045Y-77559791D01* +X173950861Y-77616876D01* +X174110345Y-77648600D01* +X174110346Y-77648600D01* +X174272954Y-77648600D01* +X174272955Y-77648600D01* +X174432439Y-77616876D01* +X174582671Y-77554648D01* +X174717875Y-77464308D01* +X174832858Y-77349325D01* +X174923198Y-77214121D01* +X174985426Y-77063889D01* +X175017150Y-76904405D01* +X175017150Y-76741795D01* +X174985426Y-76582311D01* +X174923198Y-76432079D01* +X174832858Y-76296875D01* +X174717875Y-76181892D01* +X174714166Y-76179414D01* +X174582668Y-76091550D01* +X174432440Y-76029324D01* +X174272955Y-75997600D01* +X174110345Y-75997600D01* +X174110344Y-75997600D01* +X173950859Y-76029324D01* +X173800631Y-76091550D01* +X173665428Y-76181889D01* +X173550439Y-76296878D01* +X173460100Y-76432081D01* +X173397874Y-76582309D01* +X173366150Y-76741794D01* +X101620567Y-76741794D01* +X101575059Y-76729600D01* +X101456441Y-76729600D01* +X101386317Y-76748389D01* +X101341859Y-76760302D01* +X101239141Y-76819607D01* +X101155257Y-76903491D01* +X101095952Y-77006209D01* +X101095951Y-77006214D01* +X101065250Y-77120791D01* +X80798613Y-77120791D01* +X80798607Y-77114402D01* +X80796900Y-75425991D01* +X101525950Y-75425991D01* +X101525950Y-75544609D01* +X101529223Y-75556824D01* +X101556652Y-75659190D01* +X101615957Y-75761908D01* +X101615959Y-75761910D01* +X101615961Y-75761913D01* +X101699837Y-75845789D01* +X101699839Y-75845790D01* +X101699841Y-75845792D01* +X101802560Y-75905097D01* +X101802561Y-75905097D01* +X101802564Y-75905099D01* +X101917141Y-75935800D01* +X101917143Y-75935800D01* +X102035757Y-75935800D01* +X102035759Y-75935800D01* +X102150336Y-75905099D01* +X102150338Y-75905097D01* +X102150340Y-75905097D01* +X102211145Y-75869991D01* +X165589450Y-75869991D01* +X165589450Y-75988609D01* +X165597688Y-76019352D01* +X165620152Y-76103190D01* +X165679457Y-76205908D01* +X165679459Y-76205910D01* +X165679461Y-76205913D01* +X165763337Y-76289789D01* +X165763339Y-76289790D01* +X165763341Y-76289792D01* +X165866060Y-76349097D01* +X165866061Y-76349097D01* +X165866064Y-76349099D01* +X165980641Y-76379800D01* +X165980643Y-76379800D01* +X166099257Y-76379800D01* +X166099259Y-76379800D01* +X166213836Y-76349099D01* +X166213838Y-76349097D01* +X166213840Y-76349097D01* +X166316558Y-76289792D01* +X166316558Y-76289791D01* +X166316563Y-76289789D01* +X166400439Y-76205913D01* +X166414308Y-76181892D01* +X166459747Y-76103190D01* +X166459747Y-76103188D01* +X166459749Y-76103186D01* +X166490450Y-75988609D01* +X166490450Y-75869991D01* +X166481214Y-75835522D01* +X166484417Y-75774421D01* +X166522922Y-75726871D01* +X166576841Y-75710900D01* +X166586357Y-75710900D01* +X166586359Y-75710900D01* +X166700936Y-75680199D01* +X166700938Y-75680197D01* +X166700940Y-75680197D01* +X166803658Y-75620892D01* +X166803658Y-75620891D01* +X166803663Y-75620889D01* +X166887539Y-75537013D01* +X166901449Y-75512920D01* +X166946847Y-75434290D01* +X166946847Y-75434288D01* +X166946849Y-75434286D01* +X166977550Y-75319709D01* +X166977550Y-75201091D01* +X166946849Y-75086514D01* +X166946847Y-75086511D01* +X166946847Y-75086509D01* +X166887542Y-74983791D01* +X166887540Y-74983789D01* +X166887539Y-74983787D01* +X166803663Y-74899911D01* +X166803660Y-74899909D01* +X166803658Y-74899907D01* +X166700939Y-74840602D01* +X166700940Y-74840602D01* +X166687401Y-74836974D01* +X166586359Y-74809900D01* +X166467741Y-74809900D01* +X166397617Y-74828689D01* +X166353159Y-74840602D01* +X166250441Y-74899907D01* +X166166557Y-74983791D01* +X166107252Y-75086509D01* +X166107251Y-75086514D01* +X166076550Y-75201091D01* +X166076550Y-75319709D01* +X166085786Y-75354177D01* +X166082583Y-75415279D01* +X166044078Y-75462829D01* +X165990159Y-75478800D01* +X165980641Y-75478800D01* +X165910517Y-75497589D01* +X165866059Y-75509502D01* +X165763341Y-75568807D01* +X165679457Y-75652691D01* +X165620152Y-75755409D01* +X165615058Y-75774421D01* +X165589450Y-75869991D01* +X102211145Y-75869991D01* +X102253058Y-75845792D01* +X102253058Y-75845791D01* +X102253063Y-75845789D01* +X102336939Y-75761913D01* +X102366392Y-75710900D01* +X102396247Y-75659190D01* +X102396247Y-75659188D01* +X102396249Y-75659186D01* +X102426950Y-75544609D01* +X102426950Y-75425991D01* +X102396249Y-75311414D01* +X102396247Y-75311411D01* +X102396247Y-75311409D01* +X102336942Y-75208691D01* +X102336940Y-75208689D01* +X102336939Y-75208687D01* +X102253063Y-75124811D01* +X102253060Y-75124809D01* +X102253058Y-75124807D01* +X102150339Y-75065502D01* +X102150340Y-75065502D01* +X102135781Y-75061601D01* +X102035759Y-75034800D01* +X101917141Y-75034800D01* +X101847017Y-75053589D01* +X101802559Y-75065502D01* +X101699841Y-75124807D01* +X101615957Y-75208691D01* +X101556652Y-75311409D01* +X101556651Y-75311414D01* +X101525950Y-75425991D01* +X80796900Y-75425991D01* +X80796894Y-75419602D01* +X80795513Y-74053991D01* +X97632150Y-74053991D01* +X97632150Y-74172609D01* +X97659224Y-74273651D01* +X97662852Y-74287190D01* +X97722157Y-74389908D01* +X97722159Y-74389910D01* +X97722161Y-74389913D01* +X97806037Y-74473789D01* +X97806039Y-74473790D01* +X97806041Y-74473792D01* +X97908760Y-74533097D01* +X97908761Y-74533097D01* +X97908764Y-74533099D01* +X98023341Y-74563800D01* +X98023343Y-74563800D01* +X98141957Y-74563800D01* +X98141959Y-74563800D01* +X98256536Y-74533099D01* +X98256538Y-74533097D01* +X98256540Y-74533097D01* +X98359258Y-74473792D01* +X98359258Y-74473791D01* +X98359263Y-74473789D01* +X98443139Y-74389913D01* +X98443142Y-74389908D01* +X98502447Y-74287190D01* +X98502447Y-74287188D01* +X98502449Y-74287186D01* +X98533150Y-74172609D01* +X98533150Y-74053991D01* +X98502449Y-73939414D01* +X98502447Y-73939411D01* +X98502447Y-73939409D01* +X98443142Y-73836691D01* +X98443140Y-73836689D01* +X98443139Y-73836687D01* +X98359263Y-73752811D01* +X98359260Y-73752809D01* +X98359258Y-73752807D01* +X98256539Y-73693502D01* +X98256540Y-73693502D01* +X98243001Y-73689874D01* +X98141959Y-73662800D01* +X98023341Y-73662800D01* +X97953217Y-73681589D01* +X97908759Y-73693502D01* +X97806041Y-73752807D01* +X97722157Y-73836691D01* +X97662852Y-73939409D01* +X97662851Y-73939414D01* +X97632150Y-74053991D01* +X80795513Y-74053991D01* +X80795507Y-74047602D01* +X80794689Y-73238272D01* +X106191150Y-73238272D01* +X106191150Y-74967927D01* +X106199882Y-75011820D01* +X106199883Y-75011822D01* +X106233146Y-75061604D01* +X106282928Y-75094867D01* +X106293977Y-75097064D01* +X106326822Y-75103599D01* +X106326828Y-75103599D01* +X106326830Y-75103600D01* +X106326831Y-75103600D01* +X108056469Y-75103600D01* +X108056470Y-75103600D01* +X108056471Y-75103599D01* +X108056477Y-75103599D01* +X108078273Y-75099262D01* +X108100372Y-75094867D01* +X108150154Y-75061604D01* +X108183417Y-75011822D01* +X108192150Y-74967920D01* +X108192150Y-74004556D01* +X108731150Y-74004556D01* +X108731150Y-74201643D01* +X108769599Y-74394934D01* +X108769599Y-74394936D01* +X108845017Y-74577013D01* +X108862448Y-74603100D01* +X108954511Y-74740882D01* +X109093868Y-74880239D01* +X109257736Y-74989732D01* +X109439815Y-75065151D01* +X109633109Y-75103600D01* +X109633110Y-75103600D01* +X109830190Y-75103600D01* +X109830191Y-75103600D01* +X110023485Y-75065151D01* +X110205564Y-74989732D01* +X110369432Y-74880239D01* +X110508789Y-74740882D01* +X110618282Y-74577014D01* +X110693701Y-74394935D01* +X110732150Y-74201641D01* +X110732150Y-74004559D01* +X110732149Y-74004556D01* +X111271150Y-74004556D01* +X111271150Y-74201643D01* +X111309599Y-74394934D01* +X111309599Y-74394936D01* +X111385017Y-74577013D01* +X111402448Y-74603100D01* +X111494511Y-74740882D01* +X111633868Y-74880239D01* +X111797736Y-74989732D01* +X111979815Y-75065151D01* +X112173109Y-75103600D01* +X112173110Y-75103600D01* +X112370190Y-75103600D01* +X112370191Y-75103600D01* +X112563485Y-75065151D01* +X112745564Y-74989732D01* +X112909432Y-74880239D01* +X113048789Y-74740882D01* +X113158282Y-74577014D01* +X113233701Y-74394935D01* +X113272150Y-74201641D01* +X113272150Y-74004559D01* +X113272149Y-74004556D01* +X113811150Y-74004556D01* +X113811150Y-74201643D01* +X113849599Y-74394934D01* +X113849599Y-74394936D01* +X113925017Y-74577013D01* +X113942448Y-74603100D01* +X114034511Y-74740882D01* +X114173868Y-74880239D01* +X114337736Y-74989732D01* +X114519815Y-75065151D01* +X114713109Y-75103600D01* +X114713110Y-75103600D01* +X114910190Y-75103600D01* +X114910191Y-75103600D01* +X115103485Y-75065151D01* +X115285564Y-74989732D01* +X115449432Y-74880239D01* +X115588789Y-74740882D01* +X115698282Y-74577014D01* +X115773701Y-74394935D01* +X115812150Y-74201641D01* +X115812150Y-74004559D01* +X115812149Y-74004556D01* +X116351150Y-74004556D01* +X116351150Y-74201643D01* +X116389599Y-74394934D01* +X116389599Y-74394936D01* +X116465017Y-74577013D01* +X116482448Y-74603100D01* +X116574511Y-74740882D01* +X116713868Y-74880239D01* +X116877736Y-74989732D01* +X117059815Y-75065151D01* +X117253109Y-75103600D01* +X117253110Y-75103600D01* +X117450190Y-75103600D01* +X117450191Y-75103600D01* +X117643485Y-75065151D01* +X117825564Y-74989732D01* +X117989432Y-74880239D01* +X118128789Y-74740882D01* +X118238282Y-74577014D01* +X118313701Y-74394935D01* +X118352150Y-74201641D01* +X118352150Y-74004559D01* +X118352149Y-74004556D01* +X118891150Y-74004556D01* +X118891150Y-74201643D01* +X118929599Y-74394934D01* +X118929599Y-74394936D01* +X119005017Y-74577013D01* +X119022448Y-74603100D01* +X119114511Y-74740882D01* +X119253868Y-74880239D01* +X119417736Y-74989732D01* +X119599815Y-75065151D01* +X119793109Y-75103600D01* +X119793110Y-75103600D01* +X119990190Y-75103600D01* +X119990191Y-75103600D01* +X120183485Y-75065151D01* +X120365564Y-74989732D01* +X120529432Y-74880239D01* +X120668789Y-74740882D01* +X120778282Y-74577014D01* +X120853701Y-74394935D01* +X120892150Y-74201641D01* +X120892150Y-74004559D01* +X120892149Y-74004556D01* +X121431150Y-74004556D01* +X121431150Y-74201643D01* +X121469599Y-74394934D01* +X121469599Y-74394936D01* +X121545017Y-74577013D01* +X121562448Y-74603100D01* +X121654511Y-74740882D01* +X121793868Y-74880239D01* +X121957736Y-74989732D01* +X122139815Y-75065151D01* +X122333109Y-75103600D01* +X122333110Y-75103600D01* +X122530190Y-75103600D01* +X122530191Y-75103600D01* +X122723485Y-75065151D01* +X122905564Y-74989732D01* +X123069432Y-74880239D01* +X123208789Y-74740882D01* +X123318282Y-74577014D01* +X123393701Y-74394935D01* +X123432150Y-74201641D01* +X123432150Y-74004559D01* +X123432149Y-74004556D01* +X123971150Y-74004556D01* +X123971150Y-74201643D01* +X124009599Y-74394934D01* +X124009599Y-74394936D01* +X124085017Y-74577013D01* +X124102448Y-74603100D01* +X124194511Y-74740882D01* +X124333868Y-74880239D01* +X124497736Y-74989732D01* +X124679815Y-75065151D01* +X124873109Y-75103600D01* +X124873110Y-75103600D01* +X125070190Y-75103600D01* +X125070191Y-75103600D01* +X125263485Y-75065151D01* +X125445564Y-74989732D01* +X125609432Y-74880239D01* +X125748789Y-74740882D01* +X125858282Y-74577014D01* +X125933701Y-74394935D01* +X125972150Y-74201641D01* +X125972150Y-74004559D01* +X125972149Y-74004556D01* +X126511150Y-74004556D01* +X126511150Y-74201643D01* +X126549599Y-74394934D01* +X126549599Y-74394936D01* +X126625017Y-74577013D01* +X126642448Y-74603100D01* +X126734511Y-74740882D01* +X126873868Y-74880239D01* +X127037736Y-74989732D01* +X127219815Y-75065151D01* +X127413109Y-75103600D01* +X127413110Y-75103600D01* +X127610190Y-75103600D01* +X127610191Y-75103600D01* +X127803485Y-75065151D01* +X127985564Y-74989732D01* +X128149432Y-74880239D01* +X128288789Y-74740882D01* +X128398282Y-74577014D01* +X128473701Y-74394935D01* +X128512150Y-74201641D01* +X128512150Y-74004559D01* +X128512149Y-74004556D01* +X129051150Y-74004556D01* +X129051150Y-74201643D01* +X129089599Y-74394934D01* +X129089599Y-74394936D01* +X129165017Y-74577013D01* +X129182448Y-74603100D01* +X129274511Y-74740882D01* +X129413868Y-74880239D01* +X129577736Y-74989732D01* +X129759815Y-75065151D01* +X129953109Y-75103600D01* +X129953110Y-75103600D01* +X130150190Y-75103600D01* +X130150191Y-75103600D01* +X130343485Y-75065151D01* +X130525564Y-74989732D01* +X130689432Y-74880239D01* +X130828789Y-74740882D01* +X130938282Y-74577014D01* +X131013701Y-74394935D01* +X131052150Y-74201641D01* +X131052150Y-74004559D01* +X131052149Y-74004556D01* +X131591150Y-74004556D01* +X131591150Y-74201643D01* +X131629599Y-74394934D01* +X131629599Y-74394936D01* +X131705017Y-74577013D01* +X131722448Y-74603100D01* +X131814511Y-74740882D01* +X131953868Y-74880239D01* +X132117736Y-74989732D01* +X132299815Y-75065151D01* +X132493109Y-75103600D01* +X132493110Y-75103600D01* +X132690190Y-75103600D01* +X132690191Y-75103600D01* +X132883485Y-75065151D01* +X133065564Y-74989732D01* +X133229432Y-74880239D01* +X133368789Y-74740882D01* +X133478282Y-74577014D01* +X133553701Y-74394935D01* +X133592150Y-74201641D01* +X133592150Y-74004559D01* +X133592149Y-74004556D01* +X134131150Y-74004556D01* +X134131150Y-74201643D01* +X134169599Y-74394934D01* +X134169599Y-74394936D01* +X134245017Y-74577013D01* +X134262448Y-74603100D01* +X134354511Y-74740882D01* +X134493868Y-74880239D01* +X134657736Y-74989732D01* +X134839815Y-75065151D01* +X135033109Y-75103600D01* +X135033110Y-75103600D01* +X135230190Y-75103600D01* +X135230191Y-75103600D01* +X135423485Y-75065151D01* +X135605564Y-74989732D01* +X135769432Y-74880239D01* +X135908789Y-74740882D01* +X136018282Y-74577014D01* +X136093701Y-74394935D01* +X136132150Y-74201641D01* +X136132150Y-74004559D01* +X136132149Y-74004556D01* +X136671150Y-74004556D01* +X136671150Y-74201643D01* +X136709599Y-74394934D01* +X136709599Y-74394936D01* +X136785017Y-74577013D01* +X136802448Y-74603100D01* +X136894511Y-74740882D01* +X137033868Y-74880239D01* +X137197736Y-74989732D01* +X137379815Y-75065151D01* +X137573109Y-75103600D01* +X137573110Y-75103600D01* +X137770190Y-75103600D01* +X137770191Y-75103600D01* +X137963485Y-75065151D01* +X138145564Y-74989732D01* +X138309432Y-74880239D01* +X138448789Y-74740882D01* +X138558282Y-74577014D01* +X138633701Y-74394935D01* +X138672150Y-74201641D01* +X138672150Y-74004559D01* +X138672149Y-74004556D01* +X139211150Y-74004556D01* +X139211150Y-74201643D01* +X139249599Y-74394934D01* +X139249599Y-74394936D01* +X139325017Y-74577013D01* +X139342448Y-74603100D01* +X139434511Y-74740882D01* +X139573868Y-74880239D01* +X139737736Y-74989732D01* +X139919815Y-75065151D01* +X140113109Y-75103600D01* +X140113110Y-75103600D01* +X140310190Y-75103600D01* +X140310191Y-75103600D01* +X140503485Y-75065151D01* +X140685564Y-74989732D01* +X140849432Y-74880239D01* +X140988789Y-74740882D01* +X141098282Y-74577014D01* +X141173701Y-74394935D01* +X141212150Y-74201641D01* +X141212150Y-74004559D01* +X141212149Y-74004556D01* +X141751150Y-74004556D01* +X141751150Y-74201643D01* +X141789599Y-74394934D01* +X141789599Y-74394936D01* +X141865017Y-74577013D01* +X141882448Y-74603100D01* +X141974511Y-74740882D01* +X142113868Y-74880239D01* +X142277736Y-74989732D01* +X142459815Y-75065151D01* +X142653109Y-75103600D01* +X142653110Y-75103600D01* +X142850190Y-75103600D01* +X142850191Y-75103600D01* +X143043485Y-75065151D01* +X143225564Y-74989732D01* +X143389432Y-74880239D01* +X143528789Y-74740882D01* +X143638282Y-74577014D01* +X143713701Y-74394935D01* +X143752150Y-74201641D01* +X143752150Y-74004559D01* +X143752149Y-74004556D01* +X144291150Y-74004556D01* +X144291150Y-74201643D01* +X144329599Y-74394934D01* +X144329599Y-74394936D01* +X144405017Y-74577013D01* +X144422448Y-74603100D01* +X144514511Y-74740882D01* +X144653868Y-74880239D01* +X144817736Y-74989732D01* +X144999815Y-75065151D01* +X145193109Y-75103600D01* +X145193110Y-75103600D01* +X145390190Y-75103600D01* +X145390191Y-75103600D01* +X145583485Y-75065151D01* +X145765564Y-74989732D01* +X145929432Y-74880239D01* +X146068789Y-74740882D01* +X146178282Y-74577014D01* +X146253701Y-74394935D01* +X146292150Y-74201641D01* +X146292150Y-74004559D01* +X146292149Y-74004556D01* +X146831150Y-74004556D01* +X146831150Y-74201643D01* +X146869599Y-74394934D01* +X146869599Y-74394936D01* +X146945017Y-74577013D01* +X146962448Y-74603100D01* +X147054511Y-74740882D01* +X147193868Y-74880239D01* +X147357736Y-74989732D01* +X147539815Y-75065151D01* +X147733109Y-75103600D01* +X147733110Y-75103600D01* +X147930190Y-75103600D01* +X147930191Y-75103600D01* +X148123485Y-75065151D01* +X148305564Y-74989732D01* +X148469432Y-74880239D01* +X148608789Y-74740882D01* +X148718282Y-74577014D01* +X148793701Y-74394935D01* +X148832150Y-74201641D01* +X148832150Y-74004559D01* +X148832149Y-74004556D01* +X149371150Y-74004556D01* +X149371150Y-74201643D01* +X149409599Y-74394934D01* +X149409599Y-74394936D01* +X149485017Y-74577013D01* +X149502448Y-74603100D01* +X149594511Y-74740882D01* +X149733868Y-74880239D01* +X149897736Y-74989732D01* +X150079815Y-75065151D01* +X150273109Y-75103600D01* +X150273110Y-75103600D01* +X150470190Y-75103600D01* +X150470191Y-75103600D01* +X150663485Y-75065151D01* +X150845564Y-74989732D01* +X151009432Y-74880239D01* +X151148789Y-74740882D01* +X151258282Y-74577014D01* +X151333701Y-74394935D01* +X151368813Y-74218415D01* +X151398710Y-74165032D01* +X151454275Y-74139416D01* +X151514285Y-74151353D01* +X151555817Y-74196283D01* +X151563692Y-74222243D01* +X151594890Y-74419221D01* +X151660554Y-74621315D01* +X151757026Y-74810653D01* +X151757030Y-74810659D01* +X151796378Y-74864816D01* +X151796379Y-74864816D01* +X152428687Y-74232507D01* +X152445725Y-74296093D01* +X152511551Y-74410107D01* +X152604643Y-74503199D01* +X152718657Y-74569025D01* +X152782239Y-74586062D01* +X152149932Y-75218369D01* +X152149932Y-75218370D01* +X152204090Y-75257719D01* +X152204096Y-75257723D01* +X152393434Y-75354195D01* +X152595528Y-75419859D01* +X152805400Y-75453100D01* +X153017900Y-75453100D01* +X153227771Y-75419859D01* +X153429865Y-75354195D01* +X153619206Y-75257720D01* +X153673366Y-75218370D01* +X153041058Y-74586062D01* +X153104643Y-74569025D01* +X153218657Y-74503199D01* +X153311749Y-74410107D01* +X153377575Y-74296093D01* +X153394612Y-74232508D01* +X154026920Y-74864816D01* +X154066270Y-74810656D01* +X154162745Y-74621315D01* +X154228409Y-74419221D01* +X154259607Y-74222243D01* +X154287384Y-74167727D01* +X154341901Y-74139949D01* +X154402333Y-74149520D01* +X154445598Y-74192785D01* +X154454486Y-74218415D01* +X154489599Y-74394936D01* +X154565017Y-74577013D01* +X154582448Y-74603100D01* +X154674511Y-74740882D01* +X154813868Y-74880239D01* +X154977736Y-74989732D01* +X155159815Y-75065151D01* +X155353109Y-75103600D01* +X155353110Y-75103600D01* +X155550190Y-75103600D01* +X155550191Y-75103600D01* +X155743485Y-75065151D01* +X155925564Y-74989732D01* +X156089432Y-74880239D01* +X156228789Y-74740882D01* +X156338282Y-74577014D01* +X156413701Y-74394935D01* +X156452150Y-74201641D01* +X156452150Y-74133272D01* +X173366150Y-74133272D01* +X173366150Y-75512927D01* +X173374882Y-75556820D01* +X173374884Y-75556824D01* +X173407388Y-75605470D01* +X173408146Y-75606604D01* +X173457928Y-75639867D01* +X173468977Y-75642064D01* +X173501822Y-75648599D01* +X173501828Y-75648599D01* +X173501830Y-75648600D01* +X173501831Y-75648600D01* +X174881469Y-75648600D01* +X174881470Y-75648600D01* +X174881471Y-75648599D01* +X174881477Y-75648599D01* +X174903273Y-75644262D01* +X174925372Y-75639867D01* +X174975154Y-75606604D01* +X175008417Y-75556822D01* +X175010585Y-75545924D01* +X195366649Y-75545924D01* +X195373051Y-75605470D01* +X195373053Y-75605481D01* +X195423296Y-75740188D01* +X195423297Y-75740190D01* +X195509457Y-75855284D01* +X195509465Y-75855292D01* +X195624559Y-75941452D01* +X195624561Y-75941453D01* +X195759268Y-75991696D01* +X195759279Y-75991698D01* +X195818826Y-75998100D01* +X195964129Y-75998100D01* +X196022320Y-76017007D01* +X196058284Y-76066507D01* +X196058284Y-76127693D01* +X196022320Y-76177193D01* +X196019133Y-76179414D01* +X196015428Y-76181889D01* +X195900439Y-76296878D01* +X195810100Y-76432081D01* +X195747874Y-76582309D01* +X195716150Y-76741794D01* +X195716150Y-76904405D01* +X195747874Y-77063890D01* +X195810100Y-77214118D01* +X195810101Y-77214120D01* +X195810102Y-77214121D01* +X195900442Y-77349325D01* +X196015425Y-77464308D01* +X196150629Y-77554648D01* +X196150630Y-77554648D01* +X196150631Y-77554649D01* +X196163045Y-77559791D01* +X196300861Y-77616876D01* +X196460345Y-77648600D01* +X196460346Y-77648600D01* +X196622954Y-77648600D01* +X196622955Y-77648600D01* +X196782439Y-77616876D01* +X196932671Y-77554648D01* +X197067875Y-77464308D01* +X197182858Y-77349325D01* +X197200382Y-77323099D01* +X208689418Y-77323099D01* +X208689419Y-77323100D01* +X209733638Y-77323100D01* +X209700725Y-77380107D01* +X209666650Y-77507274D01* +X209666650Y-77638926D01* +X209700725Y-77766093D01* +X209733638Y-77823100D01* +X208689419Y-77823100D01* +X208699891Y-77889222D01* +X208765554Y-78091315D01* +X208862025Y-78280652D01* +X208986927Y-78452564D01* +X209137185Y-78602822D01* +X209309097Y-78727724D01* +X209498436Y-78824196D01* +X209668478Y-78879445D01* +X209717978Y-78915409D01* +X209736886Y-78973599D01* +X209717979Y-79031790D01* +X209668479Y-79067754D01* +X209637886Y-79072600D01* +X209385128Y-79072600D01* +X209385126Y-79072601D01* +X209291350Y-79087452D01* +X209291345Y-79087454D01* +X209178309Y-79145049D01* +X209088599Y-79234759D01* +X209031004Y-79347795D01* +X209016150Y-79441578D01* +X209016150Y-80704621D01* +X209016151Y-80704623D01* +X209031002Y-80798399D01* +X209031004Y-80798404D01* +X209088600Y-80911442D01* +X209178308Y-81001150D01* +X209291346Y-81058746D01* +X209385131Y-81073600D01* +X210948168Y-81073599D01* +X210948171Y-81073599D01* +X210948172Y-81073598D01* +X210995061Y-81066172D01* +X211041949Y-81058747D01* +X211041949Y-81058746D01* +X211041954Y-81058746D01* +X211154992Y-81001150D01* +X211244700Y-80911442D01* +X211302296Y-80798404D01* +X211317150Y-80704619D01* +X211317149Y-79441582D01* +X211317149Y-79441581D01* +X211317149Y-79441578D01* +X211317148Y-79441576D01* +X211302297Y-79347800D01* +X211302296Y-79347798D01* +X211302296Y-79347796D01* +X211244700Y-79234758D01* +X211154992Y-79145050D01* +X211041954Y-79087454D01* +X211041955Y-79087454D01* +X210948172Y-79072600D01* +X210695416Y-79072600D01* +X210637225Y-79053693D01* +X210601261Y-79004193D01* +X210601261Y-78943007D01* +X210637225Y-78893507D01* +X210664824Y-78879445D01* +X210834863Y-78824196D01* +X211024202Y-78727724D01* +X211196114Y-78602822D01* +X211346372Y-78452564D01* +X211471274Y-78280652D01* +X211567745Y-78091315D01* +X211633408Y-77889222D01* +X211643881Y-77823100D01* +X210599662Y-77823100D01* +X210632575Y-77766093D01* +X210666650Y-77638926D01* +X210666650Y-77507274D01* +X210632575Y-77380107D01* +X210599662Y-77323100D01* +X211643881Y-77323100D01* +X211643881Y-77323099D01* +X211633408Y-77256977D01* +X211567745Y-77054884D01* +X211471274Y-76865547D01* +X211346372Y-76693635D01* +X211196114Y-76543377D01* +X211024202Y-76418475D01* +X210834865Y-76322004D01* +X210632771Y-76256340D01* +X210422900Y-76223100D01* +X210416651Y-76223100D01* +X210416650Y-76223101D01* +X210416650Y-77140088D01* +X210359643Y-77107175D01* +X210232476Y-77073100D01* +X210100824Y-77073100D01* +X209973657Y-77107175D01* +X209916650Y-77140088D01* +X209916650Y-76223101D01* +X209916649Y-76223100D01* +X209910400Y-76223100D01* +X209700528Y-76256340D01* +X209498434Y-76322004D01* +X209309097Y-76418475D01* +X209137185Y-76543377D01* +X208986927Y-76693635D01* +X208862025Y-76865547D01* +X208765554Y-77054884D01* +X208699891Y-77256977D01* +X208689418Y-77323099D01* +X197200382Y-77323099D01* +X197273198Y-77214121D01* +X197335426Y-77063889D01* +X197367150Y-76904405D01* +X197367150Y-76741795D01* +X197335426Y-76582311D01* +X197273198Y-76432079D01* +X197182858Y-76296875D01* +X197067875Y-76181892D01* +X197067871Y-76181889D01* +X197064167Y-76179414D01* +X197026289Y-76131363D01* +X197023889Y-76070225D01* +X197057883Y-76019352D01* +X197115287Y-75998176D01* +X197119171Y-75998100D01* +X197264474Y-75998100D01* +X197324020Y-75991698D01* +X197324031Y-75991696D01* +X197458738Y-75941453D01* +X197458740Y-75941452D01* +X197573834Y-75855292D01* +X197573842Y-75855284D01* +X197660002Y-75740190D01* +X197660003Y-75740188D01* +X197710246Y-75605481D01* +X197710248Y-75605470D01* +X197716650Y-75545924D01* +X197716650Y-75073101D01* +X197716649Y-75073100D01* +X196857336Y-75073100D01* +X196861730Y-75068706D01* +X196914391Y-74977494D01* +X196941650Y-74875761D01* +X196941650Y-74770439D01* +X196914391Y-74668706D01* +X196861730Y-74577494D01* +X196857336Y-74573100D01* +X197716649Y-74573100D01* +X197716650Y-74573099D01* +X197716650Y-74100275D01* +X197710248Y-74040729D01* +X197710246Y-74040718D01* +X197660003Y-73906011D01* +X197660002Y-73906009D01* +X197573842Y-73790915D01* +X197573834Y-73790907D01* +X197458740Y-73704747D01* +X197458738Y-73704746D01* +X197324031Y-73654503D01* +X197324020Y-73654501D01* +X197264474Y-73648100D01* +X196791651Y-73648100D01* +X196791650Y-73648101D01* +X196791650Y-74507414D01* +X196787256Y-74503020D01* +X196696044Y-74450359D01* +X196594311Y-74423100D01* +X196488989Y-74423100D01* +X196387256Y-74450359D01* +X196296044Y-74503020D01* +X196291650Y-74507414D01* +X196291650Y-73648101D01* +X196291649Y-73648100D01* +X195818826Y-73648100D01* +X195759279Y-73654501D01* +X195759268Y-73654503D01* +X195624561Y-73704746D01* +X195624559Y-73704747D01* +X195509465Y-73790907D01* +X195509457Y-73790915D01* +X195423297Y-73906009D01* +X195423296Y-73906011D01* +X195373053Y-74040718D01* +X195373051Y-74040729D01* +X195366650Y-74100275D01* +X195366650Y-74573099D01* +X195366651Y-74573100D01* +X196225964Y-74573100D01* +X196221570Y-74577494D01* +X196168909Y-74668706D01* +X196141650Y-74770439D01* +X196141650Y-74875761D01* +X196168909Y-74977494D01* +X196221570Y-75068706D01* +X196225964Y-75073100D01* +X195366651Y-75073100D01* +X195366650Y-75073101D01* +X195366650Y-75545924D01* +X195366649Y-75545924D01* +X175010585Y-75545924D01* +X175017150Y-75512920D01* +X175017150Y-74133280D01* +X175013899Y-74116935D01* +X175013899Y-74116933D01* +X175008417Y-74089379D01* +X175008415Y-74089375D01* +X175007973Y-74088714D01* +X174975154Y-74039596D01* +X174935970Y-74013414D01* +X174925374Y-74006334D01* +X174925370Y-74006332D01* +X174881477Y-73997600D01* +X174881470Y-73997600D01* +X173501830Y-73997600D01* +X173501822Y-73997600D01* +X173457929Y-74006332D01* +X173457925Y-74006334D01* +X173408148Y-74039594D01* +X173408144Y-74039598D01* +X173374884Y-74089375D01* +X173374882Y-74089379D01* +X173366150Y-74133272D01* +X156452150Y-74133272D01* +X156452150Y-74004559D01* +X156413701Y-73811265D01* +X156338282Y-73629186D01* +X156228789Y-73465318D01* +X156089432Y-73325961D01* +X155979938Y-73252799D01* +X155925563Y-73216467D01* +X155743485Y-73141049D01* +X155550193Y-73102600D01* +X155550191Y-73102600D01* +X155353109Y-73102600D01* +X155353106Y-73102600D01* +X155159815Y-73141049D01* +X155159813Y-73141049D01* +X154977736Y-73216467D01* +X154813868Y-73325961D01* +X154813864Y-73325964D01* +X154674514Y-73465314D01* +X154674511Y-73465318D01* +X154565017Y-73629186D01* +X154489599Y-73811263D01* +X154454486Y-73987784D01* +X154424589Y-74041167D01* +X154369023Y-74066783D01* +X154309014Y-74054846D01* +X154267481Y-74009916D01* +X154259607Y-73983956D01* +X154228409Y-73786978D01* +X154162745Y-73584884D01* +X154066273Y-73395546D01* +X154066269Y-73395540D01* +X154026920Y-73341382D01* +X154026919Y-73341382D01* +X153394612Y-73973689D01* +X153377575Y-73910107D01* +X153311749Y-73796093D01* +X153218657Y-73703001D01* +X153104643Y-73637175D01* +X153041057Y-73620137D01* +X153673366Y-72987829D01* +X153673366Y-72987828D01* +X153619209Y-72948480D01* +X153619203Y-72948476D01* +X153429865Y-72852004D01* +X153227771Y-72786340D01* +X153017900Y-72753100D01* +X152805400Y-72753100D01* +X152595528Y-72786340D01* +X152393434Y-72852004D01* +X152204096Y-72948476D01* +X152204092Y-72948478D01* +X152149932Y-72987828D01* +X152782241Y-73620137D01* +X152718657Y-73637175D01* +X152604643Y-73703001D01* +X152511551Y-73796093D01* +X152445725Y-73910107D01* +X152428687Y-73973691D01* +X151796378Y-73341382D01* +X151757028Y-73395542D01* +X151757026Y-73395546D01* +X151660554Y-73584884D01* +X151594890Y-73786978D01* +X151563692Y-73983956D01* +X151535914Y-74038473D01* +X151481398Y-74066250D01* +X151420966Y-74056679D01* +X151377701Y-74013414D01* +X151368813Y-73987783D01* +X151368052Y-73983956D01* +X151333701Y-73811265D01* +X151258282Y-73629186D01* +X151148789Y-73465318D01* +X151009432Y-73325961D01* +X150899938Y-73252799D01* +X150845563Y-73216467D01* +X150663485Y-73141049D01* +X150571028Y-73122658D01* +X150470193Y-73102600D01* +X150470191Y-73102600D01* +X150273109Y-73102600D01* +X150273106Y-73102600D01* +X150079815Y-73141049D01* +X150079813Y-73141049D01* +X149897736Y-73216467D01* +X149733868Y-73325961D01* +X149733864Y-73325964D01* +X149594514Y-73465314D01* +X149594511Y-73465318D01* +X149485017Y-73629186D01* +X149409599Y-73811263D01* +X149409599Y-73811265D01* +X149371150Y-74004556D01* +X148832149Y-74004556D01* +X148793701Y-73811265D01* +X148718282Y-73629186D01* +X148608789Y-73465318D01* +X148469432Y-73325961D01* +X148359938Y-73252799D01* +X148305563Y-73216467D01* +X148123485Y-73141049D01* +X147930193Y-73102600D01* +X147930191Y-73102600D01* +X147733109Y-73102600D01* +X147733106Y-73102600D01* +X147539815Y-73141049D01* +X147539813Y-73141049D01* +X147357736Y-73216467D01* +X147193868Y-73325961D01* +X147193864Y-73325964D01* +X147054514Y-73465314D01* +X147054511Y-73465318D01* +X146945017Y-73629186D01* +X146869599Y-73811263D01* +X146869599Y-73811265D01* +X146831150Y-74004556D01* +X146292149Y-74004556D01* +X146253701Y-73811265D01* +X146178282Y-73629186D01* +X146068789Y-73465318D01* +X145929432Y-73325961D01* +X145819938Y-73252799D01* +X145765563Y-73216467D01* +X145583485Y-73141049D01* +X145390193Y-73102600D01* +X145390191Y-73102600D01* +X145193109Y-73102600D01* +X145193106Y-73102600D01* +X144999815Y-73141049D01* +X144999813Y-73141049D01* +X144817736Y-73216467D01* +X144653868Y-73325961D01* +X144653864Y-73325964D01* +X144514514Y-73465314D01* +X144514511Y-73465318D01* +X144405017Y-73629186D01* +X144329599Y-73811263D01* +X144329599Y-73811265D01* +X144291150Y-74004556D01* +X143752149Y-74004556D01* +X143713701Y-73811265D01* +X143638282Y-73629186D01* +X143528789Y-73465318D01* +X143389432Y-73325961D01* +X143279938Y-73252799D01* +X143225563Y-73216467D01* +X143043485Y-73141049D01* +X142850193Y-73102600D01* +X142850191Y-73102600D01* +X142653109Y-73102600D01* +X142653106Y-73102600D01* +X142459815Y-73141049D01* +X142459813Y-73141049D01* +X142277736Y-73216467D01* +X142113868Y-73325961D01* +X142113864Y-73325964D01* +X141974514Y-73465314D01* +X141974511Y-73465318D01* +X141865017Y-73629186D01* +X141789599Y-73811263D01* +X141789599Y-73811265D01* +X141751150Y-74004556D01* +X141212149Y-74004556D01* +X141173701Y-73811265D01* +X141098282Y-73629186D01* +X140988789Y-73465318D01* +X140849432Y-73325961D01* +X140739938Y-73252799D01* +X140685563Y-73216467D01* +X140503485Y-73141049D01* +X140310193Y-73102600D01* +X140310191Y-73102600D01* +X140113109Y-73102600D01* +X140113106Y-73102600D01* +X139919815Y-73141049D01* +X139919813Y-73141049D01* +X139737736Y-73216467D01* +X139573868Y-73325961D01* +X139573864Y-73325964D01* +X139434514Y-73465314D01* +X139434511Y-73465318D01* +X139325017Y-73629186D01* +X139249599Y-73811263D01* +X139249599Y-73811265D01* +X139211150Y-74004556D01* +X138672149Y-74004556D01* +X138633701Y-73811265D01* +X138558282Y-73629186D01* +X138448789Y-73465318D01* +X138309432Y-73325961D01* +X138199938Y-73252799D01* +X138145563Y-73216467D01* +X137963485Y-73141049D01* +X137770193Y-73102600D01* +X137770191Y-73102600D01* +X137573109Y-73102600D01* +X137573106Y-73102600D01* +X137379815Y-73141049D01* +X137379813Y-73141049D01* +X137197736Y-73216467D01* +X137033868Y-73325961D01* +X137033864Y-73325964D01* +X136894514Y-73465314D01* +X136894511Y-73465318D01* +X136785017Y-73629186D01* +X136709599Y-73811263D01* +X136709599Y-73811265D01* +X136671150Y-74004556D01* +X136132149Y-74004556D01* +X136093701Y-73811265D01* +X136018282Y-73629186D01* +X135908789Y-73465318D01* +X135769432Y-73325961D01* +X135659938Y-73252799D01* +X135605563Y-73216467D01* +X135423485Y-73141049D01* +X135230193Y-73102600D01* +X135230191Y-73102600D01* +X135033109Y-73102600D01* +X135033106Y-73102600D01* +X134839815Y-73141049D01* +X134839813Y-73141049D01* +X134657736Y-73216467D01* +X134493868Y-73325961D01* +X134493864Y-73325964D01* +X134354514Y-73465314D01* +X134354511Y-73465318D01* +X134245017Y-73629186D01* +X134169599Y-73811263D01* +X134169599Y-73811265D01* +X134131150Y-74004556D01* +X133592149Y-74004556D01* +X133553701Y-73811265D01* +X133478282Y-73629186D01* +X133368789Y-73465318D01* +X133229432Y-73325961D01* +X133119938Y-73252799D01* +X133065563Y-73216467D01* +X132883485Y-73141049D01* +X132690193Y-73102600D01* +X132690191Y-73102600D01* +X132493109Y-73102600D01* +X132493106Y-73102600D01* +X132299815Y-73141049D01* +X132299813Y-73141049D01* +X132117736Y-73216467D01* +X131953868Y-73325961D01* +X131953864Y-73325964D01* +X131814514Y-73465314D01* +X131814511Y-73465318D01* +X131705017Y-73629186D01* +X131629599Y-73811263D01* +X131629599Y-73811265D01* +X131591150Y-74004556D01* +X131052149Y-74004556D01* +X131013701Y-73811265D01* +X130938282Y-73629186D01* +X130828789Y-73465318D01* +X130689432Y-73325961D01* +X130579938Y-73252799D01* +X130525563Y-73216467D01* +X130343485Y-73141049D01* +X130150193Y-73102600D01* +X130150191Y-73102600D01* +X129953109Y-73102600D01* +X129953106Y-73102600D01* +X129759815Y-73141049D01* +X129759813Y-73141049D01* +X129577736Y-73216467D01* +X129413868Y-73325961D01* +X129413864Y-73325964D01* +X129274514Y-73465314D01* +X129274511Y-73465318D01* +X129165017Y-73629186D01* +X129089599Y-73811263D01* +X129089599Y-73811265D01* +X129051150Y-74004556D01* +X128512149Y-74004556D01* +X128473701Y-73811265D01* +X128398282Y-73629186D01* +X128288789Y-73465318D01* +X128149432Y-73325961D01* +X128039938Y-73252799D01* +X127985563Y-73216467D01* +X127803485Y-73141049D01* +X127610193Y-73102600D01* +X127610191Y-73102600D01* +X127413109Y-73102600D01* +X127413106Y-73102600D01* +X127219815Y-73141049D01* +X127219813Y-73141049D01* +X127037736Y-73216467D01* +X126873868Y-73325961D01* +X126873864Y-73325964D01* +X126734514Y-73465314D01* +X126734511Y-73465318D01* +X126625017Y-73629186D01* +X126549599Y-73811263D01* +X126549599Y-73811265D01* +X126511150Y-74004556D01* +X125972149Y-74004556D01* +X125933701Y-73811265D01* +X125858282Y-73629186D01* +X125748789Y-73465318D01* +X125609432Y-73325961D01* +X125499938Y-73252799D01* +X125445563Y-73216467D01* +X125263485Y-73141049D01* +X125070193Y-73102600D01* +X125070191Y-73102600D01* +X124873109Y-73102600D01* +X124873106Y-73102600D01* +X124679815Y-73141049D01* +X124679813Y-73141049D01* +X124497736Y-73216467D01* +X124333868Y-73325961D01* +X124333864Y-73325964D01* +X124194514Y-73465314D01* +X124194511Y-73465318D01* +X124085017Y-73629186D01* +X124009599Y-73811263D01* +X124009599Y-73811265D01* +X123971150Y-74004556D01* +X123432149Y-74004556D01* +X123393701Y-73811265D01* +X123318282Y-73629186D01* +X123208789Y-73465318D01* +X123069432Y-73325961D01* +X122959938Y-73252799D01* +X122905563Y-73216467D01* +X122723485Y-73141049D01* +X122530193Y-73102600D01* +X122530191Y-73102600D01* +X122333109Y-73102600D01* +X122333106Y-73102600D01* +X122139815Y-73141049D01* +X122139813Y-73141049D01* +X121957736Y-73216467D01* +X121793868Y-73325961D01* +X121793864Y-73325964D01* +X121654514Y-73465314D01* +X121654511Y-73465318D01* +X121545017Y-73629186D01* +X121469599Y-73811263D01* +X121469599Y-73811265D01* +X121431150Y-74004556D01* +X120892149Y-74004556D01* +X120853701Y-73811265D01* +X120778282Y-73629186D01* +X120668789Y-73465318D01* +X120529432Y-73325961D01* +X120419938Y-73252799D01* +X120365563Y-73216467D01* +X120183485Y-73141049D01* +X119990193Y-73102600D01* +X119990191Y-73102600D01* +X119793109Y-73102600D01* +X119793106Y-73102600D01* +X119599815Y-73141049D01* +X119599813Y-73141049D01* +X119417736Y-73216467D01* +X119253868Y-73325961D01* +X119253864Y-73325964D01* +X119114514Y-73465314D01* +X119114511Y-73465318D01* +X119005017Y-73629186D01* +X118929599Y-73811263D01* +X118929599Y-73811265D01* +X118891150Y-74004556D01* +X118352149Y-74004556D01* +X118313701Y-73811265D01* +X118238282Y-73629186D01* +X118128789Y-73465318D01* +X117989432Y-73325961D01* +X117879938Y-73252799D01* +X117825563Y-73216467D01* +X117643485Y-73141049D01* +X117450193Y-73102600D01* +X117450191Y-73102600D01* +X117253109Y-73102600D01* +X117253106Y-73102600D01* +X117059815Y-73141049D01* +X117059813Y-73141049D01* +X116877736Y-73216467D01* +X116713868Y-73325961D01* +X116713864Y-73325964D01* +X116574514Y-73465314D01* +X116574511Y-73465318D01* +X116465017Y-73629186D01* +X116389599Y-73811263D01* +X116389599Y-73811265D01* +X116351150Y-74004556D01* +X115812149Y-74004556D01* +X115773701Y-73811265D01* +X115698282Y-73629186D01* +X115588789Y-73465318D01* +X115449432Y-73325961D01* +X115339938Y-73252799D01* +X115285563Y-73216467D01* +X115103485Y-73141049D01* +X114910193Y-73102600D01* +X114910191Y-73102600D01* +X114713109Y-73102600D01* +X114713106Y-73102600D01* +X114519815Y-73141049D01* +X114519813Y-73141049D01* +X114337736Y-73216467D01* +X114173868Y-73325961D01* +X114173864Y-73325964D01* +X114034514Y-73465314D01* +X114034511Y-73465318D01* +X113925017Y-73629186D01* +X113849599Y-73811263D01* +X113849599Y-73811265D01* +X113811150Y-74004556D01* +X113272149Y-74004556D01* +X113233701Y-73811265D01* +X113158282Y-73629186D01* +X113048789Y-73465318D01* +X112909432Y-73325961D01* +X112799938Y-73252799D01* +X112745563Y-73216467D01* +X112563485Y-73141049D01* +X112370193Y-73102600D01* +X112370191Y-73102600D01* +X112173109Y-73102600D01* +X112173106Y-73102600D01* +X111979815Y-73141049D01* +X111979813Y-73141049D01* +X111797736Y-73216467D01* +X111633868Y-73325961D01* +X111633864Y-73325964D01* +X111494514Y-73465314D01* +X111494511Y-73465318D01* +X111385017Y-73629186D01* +X111309599Y-73811263D01* +X111309599Y-73811265D01* +X111271150Y-74004556D01* +X110732149Y-74004556D01* +X110693701Y-73811265D01* +X110618282Y-73629186D01* +X110508789Y-73465318D01* +X110369432Y-73325961D01* +X110259938Y-73252799D01* +X110205563Y-73216467D01* +X110023485Y-73141049D01* +X109830193Y-73102600D01* +X109830191Y-73102600D01* +X109633109Y-73102600D01* +X109633106Y-73102600D01* +X109439815Y-73141049D01* +X109439813Y-73141049D01* +X109257736Y-73216467D01* +X109093868Y-73325961D01* +X109093864Y-73325964D01* +X108954514Y-73465314D01* +X108954511Y-73465318D01* +X108845017Y-73629186D01* +X108769599Y-73811263D01* +X108769599Y-73811265D01* +X108731150Y-74004556D01* +X108192150Y-74004556D01* +X108192150Y-73238280D01* +X108192149Y-73238278D01* +X108192149Y-73238272D01* +X108183417Y-73194379D01* +X108183415Y-73194375D01* +X108150155Y-73144598D01* +X108150154Y-73144596D01* +X108149490Y-73144152D01* +X108100374Y-73111334D01* +X108100370Y-73111332D01* +X108056477Y-73102600D01* +X108056470Y-73102600D01* +X106326830Y-73102600D01* +X106326822Y-73102600D01* +X106282929Y-73111332D01* +X106282925Y-73111334D01* +X106233148Y-73144594D01* +X106233144Y-73144598D01* +X106199884Y-73194375D01* +X106199882Y-73194379D01* +X106191150Y-73238272D01* +X80794689Y-73238272D01* +X80794684Y-73233516D01* +X80793545Y-72107291D01* +X96030550Y-72107291D01* +X96030550Y-72225909D01* +X96057624Y-72326951D01* +X96061252Y-72340490D01* +X96120557Y-72443208D01* +X96120559Y-72443210D01* +X96120561Y-72443213D01* +X96204437Y-72527089D01* +X96204439Y-72527090D01* +X96204441Y-72527092D01* +X96307160Y-72586397D01* +X96307161Y-72586397D01* +X96307164Y-72586399D01* +X96421741Y-72617100D01* +X96421743Y-72617100D01* +X96540357Y-72617100D01* +X96540359Y-72617100D01* +X96654936Y-72586399D01* +X96654938Y-72586397D01* +X96654940Y-72586397D01* +X96757658Y-72527092D01* +X96757658Y-72527091D01* +X96757663Y-72527089D01* +X96841539Y-72443213D01* +X96900849Y-72340486D01* +X96931550Y-72225909D01* +X96931550Y-72107291D01* +X96900849Y-71992714D01* +X96900847Y-71992711D01* +X96900847Y-71992709D01* +X96841542Y-71889991D01* +X96841540Y-71889989D01* +X96841539Y-71889987D01* +X96757663Y-71806111D01* +X96757660Y-71806109D01* +X96757658Y-71806107D01* +X96654939Y-71746802D01* +X96654940Y-71746802D01* +X96641401Y-71743174D01* +X96540359Y-71716100D01* +X96421741Y-71716100D01* +X96351617Y-71734889D01* +X96307159Y-71746802D01* +X96204441Y-71806107D01* +X96120557Y-71889991D01* +X96061252Y-71992709D01* +X96061251Y-71992714D01* +X96030550Y-72107291D01* +X80793545Y-72107291D01* +X80793539Y-72100902D01* +X80792652Y-71223907D01* +X80792532Y-71105291D01* +X103894850Y-71105291D01* +X103894850Y-71223909D01* +X103921924Y-71324951D01* +X103925552Y-71338490D01* +X103984857Y-71441208D01* +X103984859Y-71441210D01* +X103984861Y-71441213D01* +X104068737Y-71525089D01* +X104068739Y-71525090D01* +X104068741Y-71525092D01* +X104171460Y-71584397D01* +X104171461Y-71584397D01* +X104171464Y-71584399D01* +X104286041Y-71615100D01* +X104286043Y-71615100D01* +X104404657Y-71615100D01* +X104404659Y-71615100D01* +X104519236Y-71584399D01* +X104519238Y-71584397D01* +X104519240Y-71584397D01* +X104621958Y-71525092D01* +X104621958Y-71525091D01* +X104621963Y-71525089D01* +X104705839Y-71441213D01* +X104765149Y-71338486D01* +X104795850Y-71223909D01* +X104795850Y-71105291D01* +X104765149Y-70990714D01* +X104765147Y-70990711D01* +X104765147Y-70990709D01* +X104705842Y-70887991D01* +X104705840Y-70887989D01* +X104705839Y-70887987D01* +X104621963Y-70804111D01* +X104621960Y-70804109D01* +X104621958Y-70804107D01* +X104519239Y-70744802D01* +X104519240Y-70744802D01* +X104505701Y-70741174D01* +X104404659Y-70714100D01* +X104286041Y-70714100D01* +X104215917Y-70732889D01* +X104171459Y-70744802D01* +X104068741Y-70804107D01* +X103984857Y-70887991D01* +X103925552Y-70990709D01* +X103925551Y-70990714D01* +X103894850Y-71105291D01* +X80792532Y-71105291D01* +X80791772Y-70353291D01* +X93787750Y-70353291D01* +X93787750Y-70471909D01* +X93814824Y-70572951D01* +X93818452Y-70586490D01* +X93877757Y-70689208D01* +X93877759Y-70689210D01* +X93877761Y-70689213D01* +X93961637Y-70773089D01* +X93961639Y-70773090D01* +X93961641Y-70773092D01* +X94064360Y-70832397D01* +X94064361Y-70832397D01* +X94064364Y-70832399D01* +X94178941Y-70863100D01* +X94178943Y-70863100D01* +X94297557Y-70863100D01* +X94297559Y-70863100D01* +X94412136Y-70832399D01* +X94412138Y-70832397D01* +X94412140Y-70832397D01* +X94514858Y-70773092D01* +X94514858Y-70773091D01* +X94514863Y-70773089D01* +X94598739Y-70689213D01* +X94658049Y-70586486D01* +X94688750Y-70471909D01* +X94688750Y-70353291D01* +X94658049Y-70238714D01* +X94658046Y-70238709D01* +X94657168Y-70237187D01* +X94657167Y-70237186D01* +X94630835Y-70191578D01* +X209016150Y-70191578D01* +X209016150Y-71454621D01* +X209016151Y-71454623D01* +X209031002Y-71548399D01* +X209031004Y-71548404D01* +X209088600Y-71661442D01* +X209178308Y-71751150D01* +X209291346Y-71808746D01* +X209385131Y-71823600D01* +X210948168Y-71823599D01* +X210948171Y-71823599D01* +X210948172Y-71823598D01* +X210995061Y-71816172D01* +X211041949Y-71808747D01* +X211041949Y-71808746D01* +X211041954Y-71808746D01* +X211154992Y-71751150D01* +X211244700Y-71661442D01* +X211302296Y-71548404D01* +X211317150Y-71454619D01* +X211317149Y-70191582D01* +X211317149Y-70191581D01* +X211317149Y-70191578D01* +X211317148Y-70191576D01* +X211302297Y-70097800D01* +X211302296Y-70097798D01* +X211302296Y-70097796D01* +X211244700Y-69984758D01* +X211154992Y-69895050D01* +X211041954Y-69837454D01* +X211041955Y-69837454D01* +X210948171Y-69822600D01* +X209385128Y-69822600D01* +X209385126Y-69822601D01* +X209291350Y-69837452D01* +X209291345Y-69837454D01* +X209178309Y-69895049D01* +X209088599Y-69984759D01* +X209031004Y-70097795D01* +X209016150Y-70191578D01* +X94630835Y-70191578D01* +X94598740Y-70135989D01* +X94598739Y-70135987D01* +X94514863Y-70052111D01* +X94514860Y-70052109D01* +X94514858Y-70052107D01* +X94412139Y-69992802D01* +X94412140Y-69992802D01* +X94382119Y-69984758D01* +X94297559Y-69962100D01* +X94178941Y-69962100D01* +X94108817Y-69980889D01* +X94064359Y-69992802D01* +X93961641Y-70052107D01* +X93877757Y-70135991D01* +X93818452Y-70238709D01* +X93818451Y-70238714D01* +X93787750Y-70353291D01* +X80791772Y-70353291D01* +X80790648Y-69240691D01* +X93399500Y-69240691D01* +X93399500Y-69359309D01* +X93411606Y-69404489D01* +X93430202Y-69473890D01* +X93489507Y-69576608D01* +X93489509Y-69576610D01* +X93489511Y-69576613D01* +X93573387Y-69660489D01* +X93573389Y-69660490D01* +X93573391Y-69660492D01* +X93676110Y-69719797D01* +X93676111Y-69719797D01* +X93676114Y-69719799D01* +X93790691Y-69750500D01* +X93790693Y-69750500D01* +X93909307Y-69750500D01* +X93909309Y-69750500D01* +X94023886Y-69719799D01* +X94023888Y-69719797D01* +X94023890Y-69719797D01* +X94126608Y-69660492D01* +X94126608Y-69660491D01* +X94126613Y-69660489D01* +X94210489Y-69576613D01* +X94210492Y-69576608D01* +X94269797Y-69473890D01* +X94269797Y-69473888D01* +X94269799Y-69473886D01* +X94300500Y-69359309D01* +X94300500Y-69240691D01* +X94269799Y-69126114D01* +X94269797Y-69126111D01* +X94269797Y-69126109D01* +X94212981Y-69027702D01* +X94210492Y-69023391D01* +X94210490Y-69023389D01* +X94210489Y-69023387D01* +X94171793Y-68984691D01* +X147210750Y-68984691D01* +X147210750Y-69103309D01* +X147216861Y-69126114D01* +X147241452Y-69217890D01* +X147300757Y-69320608D01* +X147300759Y-69320610D01* +X147300761Y-69320613D01* +X147384637Y-69404489D01* +X147384639Y-69404490D01* +X147384641Y-69404492D01* +X147487360Y-69463797D01* +X147487361Y-69463797D01* +X147487364Y-69463799D01* +X147601941Y-69494500D01* +X147601943Y-69494500D01* +X147720557Y-69494500D01* +X147720559Y-69494500D01* +X147835136Y-69463799D01* +X147835138Y-69463797D01* +X147835140Y-69463797D01* +X147937858Y-69404492D01* +X147937858Y-69404491D01* +X147937863Y-69404489D01* +X148021739Y-69320613D01* +X148067882Y-69240692D01* +X148081047Y-69217890D01* +X148081047Y-69217888D01* +X148081049Y-69217886D01* +X148111750Y-69103309D01* +X148111750Y-68984691D01* +X148081049Y-68870114D01* +X148081047Y-68870111D01* +X148081047Y-68870109D01* +X148021742Y-68767391D01* +X148021740Y-68767389D01* +X148021739Y-68767387D01* +X147937863Y-68683511D01* +X147937860Y-68683509D01* +X147937858Y-68683507D01* +X147835139Y-68624202D01* +X147835140Y-68624202D01* +X147821601Y-68620574D01* +X147720559Y-68593500D01* +X147601941Y-68593500D01* +X147531817Y-68612289D01* +X147487359Y-68624202D01* +X147384641Y-68683507D01* +X147300757Y-68767391D01* +X147241452Y-68870109D01* +X147241451Y-68870114D01* +X147210750Y-68984691D01* +X94171793Y-68984691D01* +X94126613Y-68939511D01* +X94126610Y-68939509D01* +X94126608Y-68939507D01* +X94023889Y-68880202D01* +X94023890Y-68880202D01* +X93986222Y-68870109D01* +X93909309Y-68849500D01* +X93790691Y-68849500D01* +X93720567Y-68868289D01* +X93676109Y-68880202D01* +X93573391Y-68939507D01* +X93489507Y-69023391D01* +X93430202Y-69126109D01* +X93430201Y-69126114D01* +X93399500Y-69240691D01* +X80790648Y-69240691D01* +X80789621Y-68224556D01* +X209016150Y-68224556D01* +X209016150Y-68421643D01* +X209054599Y-68614934D01* +X209054599Y-68614936D01* +X209130017Y-68797013D01* +X209130018Y-68797014D01* +X209239511Y-68960882D01* +X209378868Y-69100239D01* +X209542736Y-69209732D01* +X209724815Y-69285151D01* +X209918109Y-69323600D01* +X209918110Y-69323600D01* +X210415190Y-69323600D01* +X210415191Y-69323600D01* +X210608485Y-69285151D01* +X210790564Y-69209732D01* +X210954432Y-69100239D01* +X211093789Y-68960882D01* +X211203282Y-68797014D01* +X211278701Y-68614935D01* +X211317150Y-68421641D01* +X211317150Y-68224559D01* +X211278701Y-68031265D01* +X211203282Y-67849186D01* +X211093789Y-67685318D01* +X210954432Y-67545961D01* +X210790564Y-67436468D01* +X210790565Y-67436468D01* +X210790563Y-67436467D01* +X210608485Y-67361049D01* +X210415193Y-67322600D01* +X210415191Y-67322600D01* +X209918109Y-67322600D01* +X209918106Y-67322600D01* +X209724815Y-67361049D01* +X209724813Y-67361049D01* +X209542736Y-67436467D01* +X209378868Y-67545961D01* +X209378864Y-67545964D01* +X209239514Y-67685314D01* +X209239511Y-67685318D01* +X209130017Y-67849186D01* +X209054599Y-68031263D01* +X209054599Y-68031265D01* +X209016150Y-68224556D01* +X80789621Y-68224556D01* +X80789032Y-67641591D01* +X91748050Y-67641591D01* +X91748050Y-67760209D01* +X91775124Y-67861251D01* +X91778752Y-67874790D01* +X91838057Y-67977508D01* +X91838059Y-67977510D01* +X91838061Y-67977513D01* +X91921937Y-68061389D01* +X91921939Y-68061390D01* +X91921941Y-68061392D01* +X92024660Y-68120697D01* +X92024661Y-68120697D01* +X92024664Y-68120699D01* +X92139241Y-68151400D01* +X92139243Y-68151400D01* +X92257857Y-68151400D01* +X92257859Y-68151400D01* +X92372436Y-68120699D01* +X92372438Y-68120697D01* +X92372440Y-68120697D01* +X92475158Y-68061392D01* +X92475158Y-68061391D01* +X92475163Y-68061389D01* +X92559039Y-67977513D01* +X92559042Y-67977508D01* +X92618347Y-67874790D01* +X92618347Y-67874788D01* +X92618349Y-67874786D01* +X92649050Y-67760209D01* +X92649050Y-67641591D01* +X92635411Y-67590691D01* +X120249500Y-67590691D01* +X120249500Y-67709309D01* +X120263138Y-67760207D01* +X120280202Y-67823890D01* +X120339507Y-67926608D01* +X120339509Y-67926610D01* +X120339511Y-67926613D01* +X120423387Y-68010489D01* +X120423389Y-68010490D01* +X120423391Y-68010492D01* +X120526110Y-68069797D01* +X120526111Y-68069797D01* +X120526114Y-68069799D01* +X120640691Y-68100500D01* +X120640693Y-68100500D01* +X120759307Y-68100500D01* +X120759309Y-68100500D01* +X120873886Y-68069799D01* +X120873888Y-68069797D01* +X120873890Y-68069797D01* +X120976608Y-68010492D01* +X120976608Y-68010491D01* +X120976613Y-68010489D01* +X121060489Y-67926613D01* +X121060492Y-67926608D01* +X121119797Y-67823890D01* +X121119797Y-67823888D01* +X121119799Y-67823886D01* +X121150500Y-67709309D01* +X121150500Y-67590691D01* +X121119799Y-67476114D01* +X121119797Y-67476111D01* +X121119797Y-67476109D01* +X121060492Y-67373391D01* +X121060490Y-67373389D01* +X121060489Y-67373387D01* +X120976613Y-67289511D01* +X120976610Y-67289509D01* +X120976608Y-67289507D01* +X120873889Y-67230202D01* +X120873890Y-67230202D01* +X120860351Y-67226574D01* +X120759309Y-67199500D01* +X120640691Y-67199500D01* +X120570567Y-67218289D01* +X120526109Y-67230202D01* +X120423391Y-67289507D01* +X120339507Y-67373391D01* +X120280202Y-67476109D01* +X120280201Y-67476114D01* +X120249500Y-67590691D01* +X92635411Y-67590691D01* +X92618349Y-67527014D01* +X92618347Y-67527011D01* +X92618347Y-67527009D01* +X92559042Y-67424291D01* +X92559040Y-67424289D01* +X92559039Y-67424287D01* +X92475163Y-67340411D01* +X92475160Y-67340409D01* +X92475158Y-67340407D01* +X92372439Y-67281102D01* +X92372440Y-67281102D01* +X92358901Y-67277474D01* +X92257859Y-67250400D01* +X92139241Y-67250400D01* +X92069117Y-67269189D01* +X92024659Y-67281102D01* +X91921941Y-67340407D01* +X91838057Y-67424291D01* +X91778752Y-67527009D01* +X91778751Y-67527014D01* +X91748050Y-67641591D01* +X80789032Y-67641591D01* +X80788156Y-66775102D01* +X80786905Y-65538191D01* +X169380450Y-65538191D01* +X169380450Y-65656809D01* +X169407079Y-65756191D01* +X169411152Y-65771390D01* +X169470457Y-65874108D01* +X169470459Y-65874110D01* +X169470461Y-65874113D01* +X169554337Y-65957989D01* +X169554339Y-65957990D01* +X169554341Y-65957992D01* +X169657060Y-66017297D01* +X169657061Y-66017297D01* +X169657064Y-66017299D01* +X169771641Y-66048000D01* +X169771643Y-66048000D01* +X169890257Y-66048000D01* +X169890259Y-66048000D01* +X170004836Y-66017299D01* +X170004838Y-66017297D01* +X170004840Y-66017297D01* +X170107558Y-65957992D01* +X170107558Y-65957991D01* +X170107563Y-65957989D01* +X170130502Y-65935050D01* +X188133650Y-65935050D01* +X188133650Y-66116149D01* +X188161978Y-66295006D01* +X188161979Y-66295009D01* +X188217939Y-66467239D01* +X188300154Y-66628594D01* +X188406597Y-66775101D01* +X188534649Y-66903153D01* +X188681156Y-67009596D01* +X188842511Y-67091811D01* +X189014741Y-67147771D01* +X189086286Y-67159102D01* +X189193601Y-67176100D01* +X189193604Y-67176100D01* +X189374699Y-67176100D01* +X189464127Y-67161935D01* +X189553559Y-67147771D01* +X189725789Y-67091811D01* +X189887144Y-67009596D01* +X190033651Y-66903153D01* +X190161703Y-66775101D01* +X190268146Y-66628594D01* +X190350361Y-66467239D01* +X190406321Y-66295009D01* +X190434650Y-66116146D01* +X190434650Y-65935054D01* +X190434650Y-65935050D01* +X193213650Y-65935050D01* +X193213650Y-66116149D01* +X193241978Y-66295006D01* +X193241979Y-66295009D01* +X193297939Y-66467239D01* +X193380154Y-66628594D01* +X193486597Y-66775101D01* +X193614649Y-66903153D01* +X193761156Y-67009596D01* +X193922511Y-67091811D01* +X194094741Y-67147771D01* +X194166286Y-67159102D01* +X194273601Y-67176100D01* +X194273604Y-67176100D01* +X194454699Y-67176100D01* +X194544127Y-67161935D01* +X194633559Y-67147771D01* +X194805789Y-67091811D01* +X194967144Y-67009596D01* +X195113651Y-66903153D01* +X195241703Y-66775101D01* +X195348146Y-66628594D01* +X195430361Y-66467239D01* +X195486321Y-66295009D01* +X195514650Y-66116146D01* +X195514650Y-65935054D01* +X195514650Y-65935050D01* +X195488728Y-65771390D01* +X195486321Y-65756191D01* +X195430361Y-65583961D01* +X195348146Y-65422606D01* +X195241703Y-65276099D01* +X195113651Y-65148047D01* +X194967144Y-65041604D01* +X194967143Y-65041603D01* +X194967141Y-65041602D01* +X194805787Y-64959388D01* +X194633556Y-64903428D01* +X194454699Y-64875100D01* +X194454696Y-64875100D01* +X194273604Y-64875100D01* +X194273601Y-64875100D01* +X194094743Y-64903428D01* +X193922512Y-64959388D01* +X193761158Y-65041602D01* +X193687902Y-65094825D01* +X193614649Y-65148047D01* +X193486597Y-65276099D01* +X193433375Y-65349352D01* +X193380152Y-65422608D01* +X193297938Y-65583962D01* +X193241978Y-65756193D01* +X193213650Y-65935050D01* +X190434650Y-65935050D01* +X190408728Y-65771390D01* +X190406321Y-65756191D01* +X190350361Y-65583961D01* +X190268146Y-65422606D01* +X190161703Y-65276099D01* +X190033651Y-65148047D01* +X189887144Y-65041604D01* +X189887143Y-65041603D01* +X189887141Y-65041602D01* +X189725787Y-64959388D01* +X189553556Y-64903428D01* +X189374699Y-64875100D01* +X189374696Y-64875100D01* +X189193604Y-64875100D01* +X189193601Y-64875100D01* +X189014743Y-64903428D01* +X188842512Y-64959388D01* +X188681158Y-65041602D01* +X188607902Y-65094825D01* +X188534649Y-65148047D01* +X188406597Y-65276099D01* +X188353375Y-65349352D01* +X188300152Y-65422608D01* +X188217938Y-65583962D01* +X188161978Y-65756193D01* +X188133650Y-65935050D01* +X170130502Y-65935050D01* +X170191439Y-65874113D01* +X170250749Y-65771386D01* +X170281450Y-65656809D01* +X170281450Y-65538191D01* +X170250749Y-65423614D01* +X170250747Y-65423611D01* +X170250747Y-65423609D01* +X170191442Y-65320891D01* +X170191440Y-65320889D01* +X170191439Y-65320887D01* +X170107563Y-65237011D01* +X170107560Y-65237009D01* +X170107558Y-65237007D01* +X170004839Y-65177702D01* +X170004840Y-65177702D01* +X169991301Y-65174074D01* +X169890259Y-65147000D01* +X169771641Y-65147000D01* +X169701517Y-65165789D01* +X169657059Y-65177702D01* +X169554341Y-65237007D01* +X169470457Y-65320891D01* +X169411152Y-65423609D01* +X169393987Y-65487669D01* +X169380450Y-65538191D01* +X80786905Y-65538191D01* +X80786899Y-65531802D01* +X80786320Y-64959388D01* +X80786274Y-64914191D01* +X163725350Y-64914191D01* +X163725350Y-65032809D01* +X163727707Y-65041604D01* +X163756052Y-65147390D01* +X163815357Y-65250108D01* +X163815359Y-65250110D01* +X163815361Y-65250113D01* +X163899237Y-65333989D01* +X163899239Y-65333990D01* +X163899241Y-65333992D01* +X164001960Y-65393297D01* +X164001961Y-65393297D01* +X164001964Y-65393299D01* +X164116541Y-65424000D01* +X164116543Y-65424000D01* +X164235157Y-65424000D01* +X164235159Y-65424000D01* +X164349736Y-65393299D01* +X164349738Y-65393297D01* +X164349740Y-65393297D01* +X164452458Y-65333992D01* +X164452458Y-65333991D01* +X164452463Y-65333989D01* +X164536339Y-65250113D01* +X164578146Y-65177702D01* +X164595647Y-65147390D01* +X164595647Y-65147388D01* +X164595649Y-65147386D01* +X164626350Y-65032809D01* +X164626350Y-64914191D01* +X164595649Y-64799614D01* +X164595647Y-64799611D01* +X164595647Y-64799609D01* +X164536342Y-64696891D01* +X164536340Y-64696889D01* +X164536339Y-64696887D01* +X164452463Y-64613011D01* +X164452460Y-64613009D01* +X164452458Y-64613007D01* +X164349739Y-64553702D01* +X164349740Y-64553702D01* +X164336201Y-64550074D01* +X164235159Y-64523000D01* +X164116541Y-64523000D01* +X164046417Y-64541789D01* +X164001959Y-64553702D01* +X163899241Y-64613007D01* +X163815357Y-64696891D01* +X163756052Y-64799609D01* +X163756051Y-64799614D01* +X163725350Y-64914191D01* +X80786274Y-64914191D01* +X80785492Y-64140691D01* +X153149500Y-64140691D01* +X153149500Y-64259309D01* +X153173935Y-64350500D01* +X153180202Y-64373890D01* +X153239507Y-64476608D01* +X153239509Y-64476610D01* +X153239511Y-64476613D01* +X153323387Y-64560489D01* +X153323389Y-64560490D01* +X153323391Y-64560492D01* +X153426110Y-64619797D01* +X153426111Y-64619797D01* +X153426114Y-64619799D01* +X153540691Y-64650500D01* +X153540693Y-64650500D01* +X153659307Y-64650500D01* +X153659309Y-64650500D01* +X153773886Y-64619799D01* +X153773888Y-64619797D01* +X153773890Y-64619797D01* +X153876608Y-64560492D01* +X153876608Y-64560491D01* +X153876613Y-64560489D01* +X153960489Y-64476613D01* +X154019799Y-64373886D01* +X154050500Y-64259309D01* +X154050500Y-64140691D01* +X154019799Y-64026114D01* +X154019797Y-64026111D01* +X154019797Y-64026109D01* +X153960492Y-63923391D01* +X153960490Y-63923389D01* +X153960489Y-63923387D01* +X153877793Y-63840691D01* +X156349500Y-63840691D01* +X156349500Y-63959309D01* +X156376574Y-64060351D01* +X156380202Y-64073890D01* +X156439507Y-64176608D01* +X156439509Y-64176610D01* +X156439511Y-64176613D01* +X156523387Y-64260489D01* +X156523389Y-64260490D01* +X156523391Y-64260492D01* +X156626110Y-64319797D01* +X156626111Y-64319797D01* +X156626114Y-64319799D01* +X156740691Y-64350500D01* +X156740693Y-64350500D01* +X156859307Y-64350500D01* +X156859309Y-64350500D01* +X156973886Y-64319799D01* +X156973888Y-64319797D01* +X156973890Y-64319797D01* +X157076608Y-64260492D01* +X157076608Y-64260491D01* +X157076613Y-64260489D01* +X157160489Y-64176613D01* +X157219799Y-64073886D01* +X157250500Y-63959309D01* +X157250500Y-63840691D01* +X157229895Y-63763791D01* +X166233650Y-63763791D01* +X166233650Y-63882409D01* +X166260724Y-63983451D01* +X166264352Y-63996990D01* +X166323657Y-64099708D01* +X166323659Y-64099710D01* +X166323661Y-64099713D01* +X166407537Y-64183589D01* +X166407539Y-64183590D01* +X166407541Y-64183592D01* +X166510260Y-64242897D01* +X166510261Y-64242897D01* +X166510264Y-64242899D01* +X166624841Y-64273600D01* +X166624843Y-64273600D01* +X166743457Y-64273600D01* +X166743459Y-64273600D01* +X166858036Y-64242899D01* +X166858038Y-64242897D01* +X166858040Y-64242897D01* +X166960758Y-64183592D01* +X166960758Y-64183591D01* +X166960763Y-64183589D01* +X167044639Y-64099713D01* +X167059548Y-64073890D01* +X167103947Y-63996990D01* +X167103947Y-63996988D01* +X167103949Y-63996986D01* +X167134650Y-63882409D01* +X167134650Y-63763791D01* +X167103949Y-63649214D01* +X167103947Y-63649211D01* +X167103947Y-63649209D01* +X167044642Y-63546491D01* +X167044640Y-63546489D01* +X167044639Y-63546487D01* +X166960763Y-63462611D01* +X166960760Y-63462609D01* +X166960758Y-63462607D01* +X166858039Y-63403302D01* +X166858040Y-63403302D01* +X166844501Y-63399674D01* +X166743459Y-63372600D01* +X166624841Y-63372600D01* +X166554717Y-63391389D01* +X166510259Y-63403302D01* +X166407541Y-63462607D01* +X166323657Y-63546491D01* +X166264352Y-63649209D01* +X166264217Y-63649713D01* +X166233650Y-63763791D01* +X157229895Y-63763791D01* +X157219799Y-63726114D01* +X157219797Y-63726111D01* +X157219797Y-63726109D01* +X157160492Y-63623391D01* +X157160490Y-63623389D01* +X157160489Y-63623387D01* +X157076613Y-63539511D01* +X157076610Y-63539509D01* +X157076608Y-63539507D01* +X156973889Y-63480202D01* +X156973890Y-63480202D01* +X156960351Y-63476574D01* +X156859309Y-63449500D01* +X156740691Y-63449500D01* +X156670567Y-63468289D01* +X156626109Y-63480202D01* +X156523391Y-63539507D01* +X156439507Y-63623391D01* +X156380202Y-63726109D01* +X156370105Y-63763791D01* +X156349500Y-63840691D01* +X153877793Y-63840691D01* +X153876613Y-63839511D01* +X153876610Y-63839509D01* +X153876608Y-63839507D01* +X153773889Y-63780202D01* +X153773890Y-63780202D01* +X153760351Y-63776574D01* +X153659309Y-63749500D01* +X153540691Y-63749500D01* +X153487357Y-63763791D01* +X153426109Y-63780202D01* +X153323391Y-63839507D01* +X153239507Y-63923391D01* +X153180202Y-64026109D01* +X153180201Y-64026114D01* +X153149500Y-64140691D01* +X80785492Y-64140691D01* +X80784656Y-63313791D01* +X154299500Y-63313791D01* +X154299500Y-63432409D01* +X154304080Y-63449500D01* +X154330202Y-63546990D01* +X154389507Y-63649708D01* +X154389509Y-63649710D01* +X154389511Y-63649713D01* +X154473387Y-63733589D01* +X154473389Y-63733590D01* +X154473391Y-63733592D01* +X154576110Y-63792897D01* +X154576111Y-63792897D01* +X154576114Y-63792899D01* +X154690691Y-63823600D01* +X154690693Y-63823600D01* +X154809307Y-63823600D01* +X154809309Y-63823600D01* +X154923886Y-63792899D01* +X154923888Y-63792897D01* +X154923890Y-63792897D01* +X155000837Y-63748471D01* +X155000846Y-63748466D01* +X155007982Y-63744345D01* +X155026613Y-63733589D01* +X155110489Y-63649713D01* +X155125686Y-63623391D01* +X155169797Y-63546990D01* +X155169797Y-63546988D01* +X155169799Y-63546986D01* +X155200500Y-63432409D01* +X155200500Y-63313791D01* +X155169799Y-63199214D01* +X155169797Y-63199211D01* +X155169797Y-63199209D01* +X155110492Y-63096491D01* +X155110490Y-63096489D01* +X155110489Y-63096487D01* +X155026613Y-63012611D01* +X155026610Y-63012609D01* +X155026608Y-63012607D01* +X154923889Y-62953302D01* +X154923890Y-62953302D01* +X154910351Y-62949674D01* +X154809309Y-62922600D01* +X154690691Y-62922600D01* +X154620567Y-62941389D01* +X154576109Y-62953302D01* +X154473391Y-63012607D01* +X154389507Y-63096491D01* +X154330202Y-63199209D01* +X154330201Y-63199214D01* +X154299500Y-63313791D01* +X80784656Y-63313791D01* +X80783307Y-61979091D01* +X90620050Y-61979091D01* +X90620050Y-62097709D01* +X90647124Y-62198751D01* +X90650752Y-62212290D01* +X90710057Y-62315008D01* +X90710059Y-62315010D01* +X90710061Y-62315013D01* +X90793937Y-62398889D01* +X90793939Y-62398890D01* +X90793941Y-62398892D01* +X90896660Y-62458197D01* +X90896661Y-62458197D01* +X90896664Y-62458199D01* +X91011241Y-62488900D01* +X91011243Y-62488900D01* +X91129857Y-62488900D01* +X91129859Y-62488900D01* +X91244436Y-62458199D01* +X91244438Y-62458197D01* +X91244440Y-62458197D01* +X91347158Y-62398892D01* +X91347158Y-62398891D01* +X91347163Y-62398889D01* +X91431039Y-62315013D01* +X91490349Y-62212286D01* +X91521050Y-62097709D01* +X91521050Y-61979091D01* +X91490349Y-61864514D01* +X91490347Y-61864511D01* +X91490347Y-61864509D01* +X91431042Y-61761791D01* +X91431040Y-61761789D01* +X91431039Y-61761787D01* +X91347163Y-61677911D01* +X91347160Y-61677909D01* +X91347158Y-61677907D01* +X91244439Y-61618602D01* +X91244440Y-61618602D01* +X91214173Y-61610492D01* +X91129859Y-61587900D01* +X91011241Y-61587900D01* +X90941117Y-61606689D01* +X90896659Y-61618602D01* +X90793941Y-61677907D01* +X90710057Y-61761791D01* +X90650752Y-61864509D01* +X90650751Y-61864514D01* +X90620050Y-61979091D01* +X80783307Y-61979091D01* +X80782510Y-61190691D01* +X135049500Y-61190691D01* +X135049500Y-61309309D01* +X135068763Y-61381199D01* +X135080202Y-61423890D01* +X135139507Y-61526608D01* +X135139509Y-61526610D01* +X135139511Y-61526613D01* +X135223387Y-61610489D01* +X135223389Y-61610490D01* +X135223391Y-61610492D01* +X135326110Y-61669797D01* +X135326111Y-61669797D01* +X135326114Y-61669799D01* +X135440691Y-61700500D01* +X135440693Y-61700500D01* +X135559307Y-61700500D01* +X135559309Y-61700500D01* +X135673886Y-61669799D01* +X135673888Y-61669797D01* +X135673890Y-61669797D01* +X135776608Y-61610492D01* +X135776608Y-61610491D01* +X135776613Y-61610489D01* +X135860489Y-61526613D01* +X135860492Y-61526608D01* +X135919797Y-61423890D01* +X135919797Y-61423888D01* +X135919799Y-61423886D01* +X135950500Y-61309309D01* +X135950500Y-61190691D01* +X135919799Y-61076114D01* +X135919797Y-61076111D01* +X135919797Y-61076109D01* +X135860492Y-60973391D01* +X135860490Y-60973389D01* +X135860489Y-60973387D01* +X135777793Y-60890691D01* +X141699500Y-60890691D01* +X141699500Y-61009309D01* +X141726574Y-61110351D01* +X141730202Y-61123890D01* +X141789507Y-61226608D01* +X141789509Y-61226610D01* +X141789511Y-61226613D01* +X141873387Y-61310489D01* +X141873389Y-61310490D01* +X141873391Y-61310492D01* +X141976110Y-61369797D01* +X141976111Y-61369797D01* +X141976114Y-61369799D01* +X142090691Y-61400500D01* +X142090693Y-61400500D01* +X142209307Y-61400500D01* +X142209309Y-61400500D01* +X142323886Y-61369799D01* +X142323888Y-61369797D01* +X142323890Y-61369797D01* +X142426608Y-61310492D01* +X142426608Y-61310491D01* +X142426613Y-61310489D01* +X142510489Y-61226613D01* +X142512799Y-61222613D01* +X142553913Y-61151401D01* +X142569799Y-61123886D01* +X142575666Y-61101991D01* +X155112150Y-61101991D01* +X155112150Y-61220609D01* +X155131974Y-61294591D01* +X155142852Y-61335190D01* +X155202157Y-61437908D01* +X155202159Y-61437910D01* +X155202161Y-61437913D01* +X155286037Y-61521789D01* +X155286039Y-61521790D01* +X155286041Y-61521792D01* +X155388760Y-61581097D01* +X155388761Y-61581097D01* +X155388764Y-61581099D01* +X155503341Y-61611800D01* +X155503343Y-61611800D01* +X155621957Y-61611800D01* +X155621959Y-61611800D01* +X155736536Y-61581099D01* +X155736538Y-61581097D01* +X155736540Y-61581097D01* +X155839258Y-61521792D01* +X155839258Y-61521791D01* +X155839263Y-61521789D01* +X155849161Y-61511891D01* +X161191750Y-61511891D01* +X161191750Y-61630509D01* +X161210504Y-61700500D01* +X161222452Y-61745090D01* +X161281757Y-61847808D01* +X161281759Y-61847810D01* +X161281761Y-61847813D01* +X161365637Y-61931689D01* +X161365639Y-61931690D01* +X161365641Y-61931692D01* +X161468360Y-61990997D01* +X161468361Y-61990997D01* +X161468364Y-61990999D01* +X161582941Y-62021700D01* +X161582943Y-62021700D01* +X161701557Y-62021700D01* +X161701559Y-62021700D01* +X161816136Y-61990999D01* +X161816138Y-61990997D01* +X161816140Y-61990997D01* +X161918858Y-61931692D01* +X161918858Y-61931691D01* +X161918863Y-61931689D01* +X162002739Y-61847813D01* +X162002742Y-61847808D01* +X162062047Y-61745090D01* +X162062047Y-61745088D01* +X162062049Y-61745086D01* +X162092750Y-61630509D01* +X162092750Y-61511891D01* +X162062049Y-61397314D01* +X162062047Y-61397311D01* +X162062047Y-61397309D01* +X162002742Y-61294591D01* +X162002740Y-61294589D01* +X162002739Y-61294587D01* +X161918863Y-61210711D01* +X161918860Y-61210709D01* +X161918858Y-61210707D01* +X161816139Y-61151402D01* +X161816140Y-61151402D01* +X161802601Y-61147774D01* +X161701559Y-61120700D01* +X161582941Y-61120700D01* +X161528506Y-61135286D01* +X161468359Y-61151402D01* +X161365641Y-61210707D01* +X161281757Y-61294591D01* +X161222452Y-61397309D01* +X161215331Y-61423886D01* +X161191750Y-61511891D01* +X155849161Y-61511891D01* +X155923139Y-61437913D01* +X155955883Y-61381199D01* +X155982447Y-61335190D01* +X155982447Y-61335188D01* +X155982449Y-61335186D01* +X156013150Y-61220609D01* +X156013150Y-61101991D01* +X155982449Y-60987414D01* +X155924296Y-60886691D01* +X159830050Y-60886691D01* +X159830050Y-61005309D01* +X159849021Y-61076109D01* +X159860752Y-61119890D01* +X159920057Y-61222608D01* +X159920059Y-61222610D01* +X159920061Y-61222613D01* +X160003937Y-61306489D01* +X160003939Y-61306490D01* +X160003941Y-61306492D01* +X160106660Y-61365797D01* +X160106661Y-61365797D01* +X160106664Y-61365799D01* +X160221241Y-61396500D01* +X160221243Y-61396500D01* +X160339857Y-61396500D01* +X160339859Y-61396500D01* +X160454436Y-61365799D01* +X160454438Y-61365797D01* +X160454440Y-61365797D01* +X160557158Y-61306492D01* +X160557158Y-61306491D01* +X160557163Y-61306489D01* +X160641039Y-61222613D01* +X160658955Y-61191582D01* +X160700347Y-61119890D01* +X160700347Y-61119888D01* +X160700349Y-61119886D01* +X160731050Y-61005309D01* +X160731050Y-60902091D01* +X181242950Y-60902091D01* +X181242950Y-61020709D01* +X181257796Y-61076114D01* +X181273652Y-61135290D01* +X181332957Y-61238008D01* +X181332959Y-61238010D01* +X181332961Y-61238013D01* +X181416837Y-61321889D01* +X181416839Y-61321890D01* +X181416841Y-61321892D01* +X181519560Y-61381197D01* +X181519561Y-61381197D01* +X181519564Y-61381199D01* +X181634141Y-61411900D01* +X181634143Y-61411900D01* +X181752757Y-61411900D01* +X181752759Y-61411900D01* +X181867336Y-61381199D01* +X181867338Y-61381197D01* +X181867340Y-61381197D01* +X181970058Y-61321892D01* +X181970058Y-61321891D01* +X181970063Y-61321889D01* +X182053939Y-61238013D01* +X182080748Y-61191578D01* +X209066150Y-61191578D01* +X209066150Y-62454621D01* +X209066151Y-62454623D01* +X209081002Y-62548399D01* +X209081004Y-62548404D01* +X209138600Y-62661442D01* +X209228308Y-62751150D01* +X209341346Y-62808746D01* +X209435131Y-62823600D01* +X210948168Y-62823599D01* +X210948171Y-62823599D01* +X210948172Y-62823598D01* +X210995061Y-62816172D01* +X211041949Y-62808747D01* +X211041949Y-62808746D01* +X211041954Y-62808746D01* +X211154992Y-62751150D01* +X211244700Y-62661442D01* +X211302296Y-62548404D01* +X211317150Y-62454619D01* +X211317149Y-61191582D01* +X211317149Y-61191581D01* +X211317149Y-61191578D01* +X211317148Y-61191576D01* +X211302297Y-61097800D01* +X211302296Y-61097798D01* +X211302296Y-61097796D01* +X211244700Y-60984758D01* +X211154992Y-60895050D01* +X211041954Y-60837454D01* +X211041955Y-60837454D01* +X210948171Y-60822600D01* +X209435128Y-60822600D01* +X209435126Y-60822601D01* +X209341350Y-60837452D01* +X209341345Y-60837454D01* +X209228309Y-60895049D01* +X209138599Y-60984759D01* +X209081004Y-61097795D01* +X209066150Y-61191578D01* +X182080748Y-61191578D01* +X182084680Y-61184767D01* +X182111573Y-61138190D01* +X182111573Y-61138189D01* +X182113247Y-61135290D01* +X182113247Y-61135288D01* +X182113249Y-61135286D01* +X182143950Y-61020709D01* +X182143950Y-60902091D01* +X182113249Y-60787514D01* +X182113247Y-60787511D01* +X182113247Y-60787509D01* +X182053942Y-60684791D01* +X182053940Y-60684789D01* +X182053939Y-60684787D01* +X181970063Y-60600911D01* +X181970060Y-60600909D01* +X181970058Y-60600907D01* +X181867339Y-60541602D01* +X181867340Y-60541602D01* +X181853801Y-60537974D01* +X181752759Y-60510900D01* +X181634141Y-60510900D01* +X181577034Y-60526202D01* +X181519559Y-60541602D01* +X181416841Y-60600907D01* +X181332957Y-60684791D01* +X181273652Y-60787509D01* +X181256487Y-60851569D01* +X181242950Y-60902091D01* +X160731050Y-60902091D01* +X160731050Y-60886691D01* +X160700349Y-60772114D01* +X160700347Y-60772111D01* +X160700347Y-60772109D01* +X160641042Y-60669391D01* +X160641040Y-60669389D01* +X160641039Y-60669387D01* +X160557163Y-60585511D01* +X160557160Y-60585509D01* +X160557158Y-60585507D01* +X160454439Y-60526202D01* +X160454440Y-60526202D01* +X160440901Y-60522574D01* +X160339859Y-60495500D01* +X160221241Y-60495500D01* +X160163768Y-60510900D01* +X160106659Y-60526202D01* +X160003941Y-60585507D01* +X159920057Y-60669391D01* +X159860752Y-60772109D01* +X159847223Y-60822600D01* +X159830050Y-60886691D01* +X155924296Y-60886691D01* +X155923139Y-60884687D01* +X155839263Y-60800811D01* +X155839260Y-60800809D01* +X155839258Y-60800807D01* +X155736539Y-60741502D01* +X155736540Y-60741502D01* +X155723001Y-60737874D01* +X155621959Y-60710800D01* +X155503341Y-60710800D01* +X155433217Y-60729589D01* +X155388759Y-60741502D01* +X155286041Y-60800807D01* +X155202157Y-60884691D01* +X155142852Y-60987409D01* +X155125687Y-61051469D01* +X155112150Y-61101991D01* +X142575666Y-61101991D01* +X142600500Y-61009309D01* +X142600500Y-60890691D01* +X142569799Y-60776114D01* +X142569797Y-60776111D01* +X142569797Y-60776109D01* +X142510492Y-60673391D01* +X142510490Y-60673389D01* +X142510489Y-60673387D01* +X142426613Y-60589511D01* +X142426610Y-60589509D01* +X142426608Y-60589507D01* +X142323889Y-60530202D01* +X142323890Y-60530202D01* +X142308958Y-60526201D01* +X142209309Y-60499500D01* +X142090691Y-60499500D01* +X142020567Y-60518289D01* +X141976109Y-60530202D01* +X141873391Y-60589507D01* +X141789507Y-60673391D01* +X141730202Y-60776109D01* +X141723584Y-60800807D01* +X141699500Y-60890691D01* +X135777793Y-60890691D01* +X135776613Y-60889511D01* +X135776610Y-60889509D01* +X135776608Y-60889507D01* +X135673889Y-60830202D01* +X135673890Y-60830202D01* +X135660351Y-60826574D01* +X135559309Y-60799500D01* +X135440691Y-60799500D01* +X135370567Y-60818289D01* +X135326109Y-60830202D01* +X135223391Y-60889507D01* +X135139507Y-60973391D01* +X135080202Y-61076109D01* +X135074391Y-61097796D01* +X135049500Y-61190691D01* +X80782510Y-61190691D01* +X80781575Y-60265791D01* +X164050850Y-60265791D01* +X164050850Y-60384409D01* +X164077924Y-60485451D01* +X164081552Y-60498990D01* +X164140857Y-60601708D01* +X164140859Y-60601710D01* +X164140861Y-60601713D01* +X164224737Y-60685589D01* +X164224739Y-60685590D01* +X164224741Y-60685592D01* +X164327460Y-60744897D01* +X164327461Y-60744897D01* +X164327464Y-60744899D01* +X164442041Y-60775600D01* +X164442043Y-60775600D01* +X164560657Y-60775600D01* +X164560659Y-60775600D01* +X164675236Y-60744899D01* +X164675238Y-60744897D01* +X164675240Y-60744897D01* +X164777958Y-60685592D01* +X164777958Y-60685591D01* +X164777963Y-60685589D01* +X164861839Y-60601713D01* +X164875940Y-60577289D01* +X164921147Y-60498990D01* +X164921147Y-60498988D01* +X164921149Y-60498986D01* +X164951850Y-60384409D01* +X164951850Y-60265791D01* +X164922831Y-60157491D01* +X173910250Y-60157491D01* +X173910250Y-60276109D01* +X173937324Y-60377151D01* +X173940952Y-60390690D01* +X174000257Y-60493408D01* +X174000259Y-60493410D01* +X174000261Y-60493413D01* +X174084137Y-60577289D01* +X174084139Y-60577290D01* +X174084141Y-60577292D01* +X174186860Y-60636597D01* +X174186861Y-60636597D01* +X174186864Y-60636599D01* +X174301441Y-60667300D01* +X174301443Y-60667300D01* +X174420057Y-60667300D01* +X174420059Y-60667300D01* +X174534636Y-60636599D01* +X174534638Y-60636597D01* +X174534640Y-60636597D01* +X174637358Y-60577292D01* +X174637358Y-60577291D01* +X174637363Y-60577289D01* +X174721239Y-60493413D01* +X174780549Y-60390686D01* +X174811250Y-60276109D01* +X174811250Y-60157491D01* +X174780549Y-60042914D01* +X174780547Y-60042911D01* +X174780547Y-60042909D01* +X174721242Y-59940191D01* +X174721240Y-59940189D01* +X174721239Y-59940187D01* +X174637363Y-59856311D01* +X174637360Y-59856309D01* +X174637358Y-59856307D01* +X174534639Y-59797002D01* +X174534640Y-59797002D01* +X174521101Y-59793374D01* +X174420059Y-59766300D01* +X174301441Y-59766300D01* +X174231317Y-59785089D01* +X174186859Y-59797002D01* +X174084141Y-59856307D01* +X174000257Y-59940191D01* +X173940952Y-60042909D01* +X173925592Y-60100235D01* +X173910250Y-60157491D01* +X164922831Y-60157491D01* +X164921149Y-60151214D01* +X164910460Y-60132700D01* +X164861842Y-60048491D01* +X164861840Y-60048489D01* +X164861839Y-60048487D01* +X164777963Y-59964611D01* +X164777960Y-59964609D01* +X164777958Y-59964607D01* +X164675239Y-59905302D01* +X164675240Y-59905302D01* +X164661701Y-59901674D01* +X164560659Y-59874600D01* +X164442041Y-59874600D01* +X164371917Y-59893389D01* +X164327459Y-59905302D01* +X164224741Y-59964607D01* +X164140857Y-60048491D01* +X164081552Y-60151209D01* +X164074742Y-60176624D01* +X164050850Y-60265791D01* +X80781575Y-60265791D01* +X80780925Y-59622891D01* +X160243050Y-59622891D01* +X160243050Y-59741509D01* +X160257923Y-59797014D01* +X160273752Y-59856090D01* +X160333057Y-59958808D01* +X160333059Y-59958810D01* +X160333061Y-59958813D01* +X160416937Y-60042689D01* +X160416939Y-60042690D01* +X160416941Y-60042692D01* +X160519660Y-60101997D01* +X160519661Y-60101997D01* +X160519664Y-60101999D01* +X160634241Y-60132700D01* +X160634243Y-60132700D01* +X160752857Y-60132700D01* +X160752859Y-60132700D01* +X160867436Y-60101999D01* +X160867438Y-60101997D01* +X160867440Y-60101997D01* +X160970158Y-60042692D01* +X160970158Y-60042691D01* +X160970163Y-60042689D01* +X161054039Y-59958813D01* +X161084934Y-59905302D01* +X161113347Y-59856090D01* +X161113347Y-59856088D01* +X161113349Y-59856086D01* +X161144050Y-59741509D01* +X161144050Y-59622891D01* +X161113349Y-59508314D01* +X161113347Y-59508311D01* +X161113347Y-59508309D01* +X161054042Y-59405591D01* +X161054040Y-59405589D01* +X161054039Y-59405587D01* +X160970163Y-59321711D01* +X160970160Y-59321709D01* +X160970158Y-59321707D01* +X160867439Y-59262402D01* +X160867440Y-59262402D01* +X160853901Y-59258774D01* +X160752859Y-59231700D01* +X160634241Y-59231700D01* +X160564117Y-59250489D01* +X160519659Y-59262402D01* +X160416941Y-59321707D01* +X160333057Y-59405591D01* +X160273752Y-59508309D01* +X160273751Y-59508314D01* +X160243050Y-59622891D01* +X80780925Y-59622891D01* +X80779603Y-58315050D01* +X188133650Y-58315050D01* +X188133650Y-58496149D01* +X188161978Y-58675006D01* +X188165328Y-58685318D01* +X188217939Y-58847239D01* +X188300154Y-59008594D01* +X188406597Y-59155101D01* +X188534649Y-59283153D01* +X188681156Y-59389596D01* +X188842511Y-59471811D01* +X189014741Y-59527771D01* +X189086286Y-59539102D01* +X189193601Y-59556100D01* +X189193604Y-59556100D01* +X189374699Y-59556100D01* +X189464127Y-59541935D01* +X189553559Y-59527771D01* +X189725789Y-59471811D01* +X189887144Y-59389596D01* +X190033651Y-59283153D01* +X190161703Y-59155101D01* +X190268146Y-59008594D01* +X190350361Y-58847239D01* +X190406321Y-58675009D01* +X190434650Y-58496146D01* +X190434650Y-58315054D01* +X190434650Y-58315050D01* +X193213650Y-58315050D01* +X193213650Y-58496149D01* +X193241978Y-58675006D01* +X193245328Y-58685318D01* +X193297939Y-58847239D01* +X193380154Y-59008594D01* +X193486597Y-59155101D01* +X193614649Y-59283153D01* +X193761156Y-59389596D01* +X193922511Y-59471811D01* +X194094741Y-59527771D01* +X194166286Y-59539102D01* +X194273601Y-59556100D01* +X194273604Y-59556100D01* +X194454699Y-59556100D01* +X194544127Y-59541935D01* +X194633559Y-59527771D01* +X194805789Y-59471811D01* +X194967144Y-59389596D01* +X195113651Y-59283153D01* +X195241703Y-59155101D01* +X195348146Y-59008594D01* +X195430361Y-58847239D01* +X195486321Y-58675009D01* +X195514650Y-58496146D01* +X195514650Y-58315054D01* +X195514650Y-58315050D01* +X195486321Y-58136193D01* +X195486321Y-58136191D01* +X195430361Y-57963961D01* +X195348146Y-57802606D01* +X195241703Y-57656099D01* +X195113651Y-57528047D01* +X194967144Y-57421604D01* +X194967143Y-57421603D01* +X194967141Y-57421602D01* +X194805787Y-57339388D01* +X194633556Y-57283428D01* +X194454699Y-57255100D01* +X194454696Y-57255100D01* +X194273604Y-57255100D01* +X194273601Y-57255100D01* +X194094743Y-57283428D01* +X193922512Y-57339388D01* +X193761158Y-57421602D01* +X193738079Y-57438370D01* +X193614649Y-57528047D01* +X193486597Y-57656099D01* +X193433375Y-57729352D01* +X193380152Y-57802608D01* +X193297938Y-57963962D01* +X193241978Y-58136193D01* +X193213650Y-58315050D01* +X190434650Y-58315050D01* +X190406321Y-58136193D01* +X190406321Y-58136191D01* +X190350361Y-57963961D01* +X190268146Y-57802606D01* +X190161703Y-57656099D01* +X190033651Y-57528047D01* +X189887144Y-57421604D01* +X189887143Y-57421603D01* +X189887141Y-57421602D01* +X189725787Y-57339388D01* +X189553556Y-57283428D01* +X189374699Y-57255100D01* +X189374696Y-57255100D01* +X189193604Y-57255100D01* +X189193601Y-57255100D01* +X189014743Y-57283428D01* +X188842512Y-57339388D01* +X188681158Y-57421602D01* +X188658079Y-57438370D01* +X188534649Y-57528047D01* +X188406597Y-57656099D01* +X188353375Y-57729352D01* +X188300152Y-57802608D01* +X188217938Y-57963962D01* +X188161978Y-58136193D01* +X188133650Y-58315050D01* +X80779603Y-58315050D01* +X80778694Y-57415491D01* +X123742450Y-57415491D01* +X123742450Y-57534109D01* +X123753191Y-57574195D01* +X123773152Y-57648690D01* +X123832457Y-57751408D01* +X123832459Y-57751410D01* +X123832461Y-57751413D01* +X123916337Y-57835289D01* +X123916339Y-57835290D01* +X123916341Y-57835292D01* +X124019060Y-57894597D01* +X124019061Y-57894597D01* +X124019064Y-57894599D01* +X124133641Y-57925300D01* +X124133643Y-57925300D01* +X124252257Y-57925300D01* +X124252259Y-57925300D01* +X124366836Y-57894599D01* +X124366838Y-57894597D01* +X124366840Y-57894597D01* +X124469558Y-57835292D01* +X124469558Y-57835291D01* +X124469563Y-57835289D01* +X124553439Y-57751413D01* +X124581642Y-57702564D01* +X124612747Y-57648690D01* +X124612747Y-57648688D01* +X124612749Y-57648686D01* +X124643450Y-57534109D01* +X124643450Y-57415491D01* +X124643449Y-57415488D01* +X124642884Y-57411198D01* +X124654029Y-57351036D01* +X124698409Y-57308915D01* +X124759070Y-57300924D01* +X124760236Y-57301148D01* +X124873109Y-57323600D01* +X124873110Y-57323600D01* +X125070190Y-57323600D01* +X125070191Y-57323600D01* +X125263485Y-57285151D01* +X125445564Y-57209732D01* +X125609432Y-57100239D01* +X125748789Y-56960882D01* +X125858282Y-56797014D01* +X125933701Y-56614935D01* +X125972150Y-56421641D01* +X125972150Y-56224559D01* +X125972149Y-56224556D01* +X126511150Y-56224556D01* +X126511150Y-56421643D01* +X126549599Y-56614934D01* +X126549599Y-56614936D01* +X126625017Y-56797013D01* +X126625018Y-56797014D01* +X126734511Y-56960882D01* +X126873868Y-57100239D01* +X127037736Y-57209732D01* +X127219815Y-57285151D01* +X127413109Y-57323600D01* +X127413110Y-57323600D01* +X127610190Y-57323600D01* +X127610191Y-57323600D01* +X127803485Y-57285151D01* +X127985564Y-57209732D01* +X128149432Y-57100239D01* +X128288789Y-56960882D01* +X128398282Y-56797014D01* +X128473701Y-56614935D01* +X128512150Y-56421641D01* +X128512150Y-56224559D01* +X128512149Y-56224556D01* +X129051150Y-56224556D01* +X129051150Y-56421643D01* +X129089599Y-56614934D01* +X129089599Y-56614936D01* +X129165017Y-56797013D01* +X129165018Y-56797014D01* +X129274511Y-56960882D01* +X129413868Y-57100239D01* +X129577736Y-57209732D01* +X129759815Y-57285151D01* +X129953109Y-57323600D01* +X129953110Y-57323600D01* +X130150190Y-57323600D01* +X130150191Y-57323600D01* +X130343485Y-57285151D01* +X130525564Y-57209732D01* +X130689432Y-57100239D01* +X130828789Y-56960882D01* +X130938282Y-56797014D01* +X131013701Y-56614935D01* +X131052150Y-56421641D01* +X131052150Y-56224559D01* +X131052149Y-56224556D01* +X131591150Y-56224556D01* +X131591150Y-56421643D01* +X131629599Y-56614934D01* +X131629599Y-56614936D01* +X131705017Y-56797013D01* +X131705018Y-56797014D01* +X131814511Y-56960882D01* +X131953868Y-57100239D01* +X132117736Y-57209732D01* +X132299815Y-57285151D01* +X132493109Y-57323600D01* +X132493110Y-57323600D01* +X132690190Y-57323600D01* +X132690191Y-57323600D01* +X132883485Y-57285151D01* +X133065564Y-57209732D01* +X133229432Y-57100239D01* +X133368789Y-56960882D01* +X133478282Y-56797014D01* +X133553701Y-56614935D01* +X133592150Y-56421641D01* +X133592150Y-56224559D01* +X133592149Y-56224556D01* +X134131150Y-56224556D01* +X134131150Y-56421643D01* +X134169599Y-56614934D01* +X134169599Y-56614936D01* +X134245017Y-56797013D01* +X134245018Y-56797014D01* +X134354511Y-56960882D01* +X134493868Y-57100239D01* +X134657736Y-57209732D01* +X134839815Y-57285151D01* +X135033109Y-57323600D01* +X135033110Y-57323600D01* +X135230190Y-57323600D01* +X135230191Y-57323600D01* +X135423485Y-57285151D01* +X135605564Y-57209732D01* +X135769432Y-57100239D01* +X135908789Y-56960882D01* +X136018282Y-56797014D01* +X136093701Y-56614935D01* +X136132150Y-56421641D01* +X136132150Y-56224559D01* +X136132149Y-56224556D01* +X136671150Y-56224556D01* +X136671150Y-56421643D01* +X136709599Y-56614934D01* +X136709599Y-56614936D01* +X136785017Y-56797013D01* +X136785018Y-56797014D01* +X136894511Y-56960882D01* +X137033868Y-57100239D01* +X137197736Y-57209732D01* +X137379815Y-57285151D01* +X137573109Y-57323600D01* +X137573110Y-57323600D01* +X137770190Y-57323600D01* +X137770191Y-57323600D01* +X137963485Y-57285151D01* +X138145564Y-57209732D01* +X138309432Y-57100239D01* +X138448789Y-56960882D01* +X138558282Y-56797014D01* +X138633701Y-56614935D01* +X138672150Y-56421641D01* +X138672150Y-56224559D01* +X138672149Y-56224556D01* +X139211150Y-56224556D01* +X139211150Y-56421643D01* +X139249599Y-56614934D01* +X139249599Y-56614936D01* +X139325017Y-56797013D01* +X139325018Y-56797014D01* +X139434511Y-56960882D01* +X139573868Y-57100239D01* +X139737736Y-57209732D01* +X139919815Y-57285151D01* +X140113109Y-57323600D01* +X140113110Y-57323600D01* +X140310190Y-57323600D01* +X140310191Y-57323600D01* +X140503485Y-57285151D01* +X140685564Y-57209732D01* +X140849432Y-57100239D01* +X140988789Y-56960882D01* +X141098282Y-56797014D01* +X141173701Y-56614935D01* +X141212150Y-56421641D01* +X141212150Y-56224559D01* +X141212149Y-56224556D01* +X141751150Y-56224556D01* +X141751150Y-56421643D01* +X141789599Y-56614934D01* +X141789599Y-56614936D01* +X141865017Y-56797013D01* +X141865018Y-56797014D01* +X141974511Y-56960882D01* +X142113868Y-57100239D01* +X142277736Y-57209732D01* +X142459815Y-57285151D01* +X142653109Y-57323600D01* +X142653110Y-57323600D01* +X142850190Y-57323600D01* +X142850191Y-57323600D01* +X143043485Y-57285151D01* +X143225564Y-57209732D01* +X143389432Y-57100239D01* +X143528789Y-56960882D01* +X143638282Y-56797014D01* +X143713701Y-56614935D01* +X143752150Y-56421641D01* +X143752150Y-56224559D01* +X143752149Y-56224556D01* +X144291150Y-56224556D01* +X144291150Y-56421643D01* +X144329599Y-56614934D01* +X144329599Y-56614936D01* +X144405017Y-56797013D01* +X144405018Y-56797014D01* +X144514511Y-56960882D01* +X144653868Y-57100239D01* +X144817736Y-57209732D01* +X144999815Y-57285151D01* +X145193109Y-57323600D01* +X145193110Y-57323600D01* +X145390190Y-57323600D01* +X145390191Y-57323600D01* +X145583485Y-57285151D01* +X145765564Y-57209732D01* +X145929432Y-57100239D01* +X146068789Y-56960882D01* +X146178282Y-56797014D01* +X146253701Y-56614935D01* +X146292150Y-56421641D01* +X146292150Y-56224559D01* +X146292149Y-56224556D01* +X146831150Y-56224556D01* +X146831150Y-56421643D01* +X146869599Y-56614934D01* +X146869599Y-56614936D01* +X146945017Y-56797013D01* +X146945018Y-56797014D01* +X147054511Y-56960882D01* +X147193868Y-57100239D01* +X147357736Y-57209732D01* +X147539815Y-57285151D01* +X147733109Y-57323600D01* +X147733110Y-57323600D01* +X147930190Y-57323600D01* +X147930191Y-57323600D01* +X148123485Y-57285151D01* +X148305564Y-57209732D01* +X148469432Y-57100239D01* +X148608789Y-56960882D01* +X148718282Y-56797014D01* +X148793701Y-56614935D01* +X148832150Y-56421641D01* +X148832150Y-56224559D01* +X148832149Y-56224556D01* +X149371150Y-56224556D01* +X149371150Y-56421643D01* +X149409599Y-56614934D01* +X149409599Y-56614936D01* +X149485017Y-56797013D01* +X149485018Y-56797014D01* +X149594511Y-56960882D01* +X149733868Y-57100239D01* +X149897736Y-57209732D01* +X150079815Y-57285151D01* +X150273109Y-57323600D01* +X150273110Y-57323600D01* +X150470190Y-57323600D01* +X150470191Y-57323600D01* +X150663485Y-57285151D01* +X150845564Y-57209732D01* +X151009432Y-57100239D01* +X151148789Y-56960882D01* +X151258282Y-56797014D01* +X151333701Y-56614935D01* +X151368813Y-56438415D01* +X151398710Y-56385032D01* +X151454275Y-56359416D01* +X151514285Y-56371353D01* +X151555817Y-56416283D01* +X151563692Y-56442243D01* +X151594890Y-56639221D01* +X151660554Y-56841315D01* +X151757026Y-57030653D01* +X151757030Y-57030659D01* +X151796378Y-57084816D01* +X151796379Y-57084816D01* +X152428687Y-56452507D01* +X152445725Y-56516093D01* +X152511551Y-56630107D01* +X152604643Y-56723199D01* +X152718657Y-56789025D01* +X152782239Y-56806062D01* +X152149932Y-57438369D01* +X152149932Y-57438370D01* +X152204090Y-57477719D01* +X152204096Y-57477723D01* +X152393434Y-57574195D01* +X152595528Y-57639859D01* +X152805400Y-57673100D01* +X153017900Y-57673100D01* +X153227771Y-57639859D01* +X153429865Y-57574195D01* +X153619206Y-57477720D01* +X153673366Y-57438370D01* +X153041058Y-56806062D01* +X153104643Y-56789025D01* +X153218657Y-56723199D01* +X153311749Y-56630107D01* +X153377575Y-56516093D01* +X153394612Y-56452508D01* +X154026920Y-57084816D01* +X154066270Y-57030656D01* +X154162745Y-56841315D01* +X154228409Y-56639221D01* +X154259607Y-56442243D01* +X154287384Y-56387727D01* +X154341901Y-56359949D01* +X154402333Y-56369520D01* +X154445598Y-56412785D01* +X154454486Y-56438415D01* +X154489599Y-56614936D01* +X154565017Y-56797013D01* +X154565018Y-56797014D01* +X154674511Y-56960882D01* +X154813868Y-57100239D01* +X154977736Y-57209732D01* +X155159815Y-57285151D01* +X155353109Y-57323600D01* +X155353110Y-57323600D01* +X155550190Y-57323600D01* +X155550191Y-57323600D01* +X155743485Y-57285151D01* +X155925564Y-57209732D01* +X156089432Y-57100239D01* +X156228789Y-56960882D01* +X156338282Y-56797014D01* +X156413701Y-56614935D01* +X156452150Y-56421641D01* +X156452150Y-56224559D01* +X156413701Y-56031265D01* +X156338282Y-55849186D01* +X156228789Y-55685318D01* +X156089432Y-55545961D01* +X155925564Y-55436468D01* +X155895369Y-55423961D01* +X155794527Y-55382191D01* +X166291250Y-55382191D01* +X166291250Y-55500809D01* +X166307481Y-55561382D01* +X166321952Y-55615390D01* +X166381257Y-55718108D01* +X166381259Y-55718110D01* +X166381261Y-55718113D01* +X166465137Y-55801989D01* +X166465139Y-55801990D01* +X166465141Y-55801992D01* +X166567860Y-55861297D01* +X166567861Y-55861297D01* +X166567864Y-55861299D01* +X166682441Y-55892000D01* +X166682443Y-55892000D01* +X166801057Y-55892000D01* +X166801059Y-55892000D01* +X166915636Y-55861299D01* +X166915638Y-55861297D01* +X166915640Y-55861297D01* +X167018358Y-55801992D01* +X167018358Y-55801991D01* +X167018363Y-55801989D01* +X167102239Y-55718113D01* +X167102242Y-55718108D01* +X167161547Y-55615390D01* +X167161547Y-55615388D01* +X167161549Y-55615386D01* +X167192250Y-55500809D01* +X167192250Y-55382191D01* +X167171109Y-55303291D01* +X169862450Y-55303291D01* +X169862450Y-55421909D01* +X169872196Y-55458280D01* +X169893152Y-55536490D01* +X169952457Y-55639208D01* +X169952459Y-55639210D01* +X169952461Y-55639213D01* +X170036337Y-55723089D01* +X170036339Y-55723090D01* +X170036341Y-55723092D01* +X170139060Y-55782397D01* +X170139061Y-55782397D01* +X170139064Y-55782399D01* +X170253641Y-55813100D01* +X170253643Y-55813100D01* +X170372257Y-55813100D01* +X170372259Y-55813100D01* +X170486836Y-55782399D01* +X170486838Y-55782397D01* +X170486840Y-55782397D01* +X170589558Y-55723092D01* +X170589558Y-55723091D01* +X170589563Y-55723089D01* +X170673439Y-55639213D01* +X170698278Y-55596191D01* +X170732747Y-55536490D01* +X170732747Y-55536488D01* +X170732749Y-55536486D01* +X170763450Y-55421909D01* +X170763450Y-55303291D01* +X170732749Y-55188714D01* +X170732747Y-55188711D01* +X170732747Y-55188709D01* +X170673442Y-55085991D01* +X170673440Y-55085989D01* +X170673439Y-55085987D01* +X170589563Y-55002111D01* +X170589560Y-55002109D01* +X170589558Y-55002107D01* +X170486839Y-54942802D01* +X170486841Y-54942802D01* +X170485075Y-54942329D01* +X170372259Y-54912100D01* +X170253641Y-54912100D01* +X170183517Y-54930889D01* +X170139059Y-54942802D01* +X170036341Y-55002107D01* +X169952457Y-55085991D01* +X169893152Y-55188709D01* +X169893151Y-55188714D01* +X169862450Y-55303291D01* +X167171109Y-55303291D01* +X167161549Y-55267614D01* +X167161547Y-55267611D01* +X167161547Y-55267609D01* +X167102242Y-55164891D01* +X167102240Y-55164889D01* +X167102239Y-55164887D01* +X167018363Y-55081011D01* +X167018360Y-55081009D01* +X167018358Y-55081007D01* +X166915639Y-55021702D01* +X166915640Y-55021702D01* +X166902101Y-55018074D01* +X166801059Y-54991000D01* +X166682441Y-54991000D01* +X166625192Y-55006340D01* +X166567859Y-55021702D01* +X166465141Y-55081007D01* +X166381257Y-55164891D01* +X166321952Y-55267609D01* +X166305800Y-55327891D01* +X166291250Y-55382191D01* +X155794527Y-55382191D01* +X155743485Y-55361049D01* +X155550193Y-55322600D01* +X155550191Y-55322600D01* +X155353109Y-55322600D01* +X155353106Y-55322600D01* +X155159815Y-55361049D01* +X155159813Y-55361049D01* +X154977736Y-55436467D01* +X154813868Y-55545961D01* +X154813864Y-55545964D01* +X154674514Y-55685314D01* +X154674511Y-55685318D01* +X154565017Y-55849186D01* +X154489599Y-56031263D01* +X154454486Y-56207784D01* +X154424589Y-56261167D01* +X154369023Y-56286783D01* +X154309014Y-56274846D01* +X154267481Y-56229916D01* +X154259607Y-56203956D01* +X154228409Y-56006978D01* +X154162745Y-55804884D01* +X154066273Y-55615546D01* +X154066269Y-55615540D01* +X154026920Y-55561382D01* +X154026919Y-55561382D01* +X153394612Y-56193689D01* +X153377575Y-56130107D01* +X153311749Y-56016093D01* +X153218657Y-55923001D01* +X153104643Y-55857175D01* +X153041057Y-55840137D01* +X153673366Y-55207829D01* +X153673366Y-55207828D01* +X153619209Y-55168480D01* +X153619203Y-55168476D01* +X153429865Y-55072004D01* +X153227771Y-55006340D01* +X153017900Y-54973100D01* +X152805400Y-54973100D01* +X152595528Y-55006340D01* +X152393434Y-55072004D01* +X152204096Y-55168476D01* +X152204092Y-55168478D01* +X152149932Y-55207828D01* +X152782241Y-55840137D01* +X152718657Y-55857175D01* +X152604643Y-55923001D01* +X152511551Y-56016093D01* +X152445725Y-56130107D01* +X152428687Y-56193691D01* +X151796378Y-55561382D01* +X151757028Y-55615542D01* +X151757026Y-55615546D01* +X151660554Y-55804884D01* +X151594890Y-56006978D01* +X151563692Y-56203956D01* +X151535914Y-56258473D01* +X151481398Y-56286250D01* +X151420966Y-56276679D01* +X151377701Y-56233414D01* +X151368813Y-56207783D01* +X151354337Y-56135009D01* +X151333701Y-56031265D01* +X151258282Y-55849186D01* +X151148789Y-55685318D01* +X151009432Y-55545961D01* +X150888407Y-55465095D01* +X150845563Y-55436467D01* +X150663485Y-55361049D01* +X150560212Y-55340506D01* +X150470193Y-55322600D01* +X150470191Y-55322600D01* +X150273109Y-55322600D01* +X150273106Y-55322600D01* +X150079815Y-55361049D01* +X150079813Y-55361049D01* +X149897736Y-55436467D01* +X149733868Y-55545961D01* +X149733864Y-55545964D01* +X149594514Y-55685314D01* +X149594511Y-55685318D01* +X149485017Y-55849186D01* +X149409599Y-56031263D01* +X149409599Y-56031265D01* +X149371150Y-56224556D01* +X148832149Y-56224556D01* +X148793701Y-56031265D01* +X148718282Y-55849186D01* +X148608789Y-55685318D01* +X148469432Y-55545961D01* +X148348407Y-55465095D01* +X148305563Y-55436467D01* +X148123485Y-55361049D01* +X147930193Y-55322600D01* +X147930191Y-55322600D01* +X147733109Y-55322600D01* +X147733106Y-55322600D01* +X147539815Y-55361049D01* +X147539813Y-55361049D01* +X147357736Y-55436467D01* +X147193868Y-55545961D01* +X147193864Y-55545964D01* +X147054514Y-55685314D01* +X147054511Y-55685318D01* +X146945017Y-55849186D01* +X146869599Y-56031263D01* +X146869599Y-56031265D01* +X146831150Y-56224556D01* +X146292149Y-56224556D01* +X146253701Y-56031265D01* +X146178282Y-55849186D01* +X146068789Y-55685318D01* +X145929432Y-55545961D01* +X145808407Y-55465095D01* +X145765563Y-55436467D01* +X145583485Y-55361049D01* +X145390193Y-55322600D01* +X145390191Y-55322600D01* +X145193109Y-55322600D01* +X145193106Y-55322600D01* +X144999815Y-55361049D01* +X144999813Y-55361049D01* +X144817736Y-55436467D01* +X144653868Y-55545961D01* +X144653864Y-55545964D01* +X144514514Y-55685314D01* +X144514511Y-55685318D01* +X144405017Y-55849186D01* +X144329599Y-56031263D01* +X144329599Y-56031265D01* +X144291150Y-56224556D01* +X143752149Y-56224556D01* +X143713701Y-56031265D01* +X143638282Y-55849186D01* +X143528789Y-55685318D01* +X143389432Y-55545961D01* +X143268407Y-55465095D01* +X143225563Y-55436467D01* +X143043485Y-55361049D01* +X142850193Y-55322600D01* +X142850191Y-55322600D01* +X142653109Y-55322600D01* +X142653106Y-55322600D01* +X142459815Y-55361049D01* +X142459813Y-55361049D01* +X142277736Y-55436467D01* +X142113868Y-55545961D01* +X142113864Y-55545964D01* +X141974514Y-55685314D01* +X141974511Y-55685318D01* +X141865017Y-55849186D01* +X141789599Y-56031263D01* +X141789599Y-56031265D01* +X141751150Y-56224556D01* +X141212149Y-56224556D01* +X141173701Y-56031265D01* +X141098282Y-55849186D01* +X140988789Y-55685318D01* +X140849432Y-55545961D01* +X140728407Y-55465095D01* +X140685563Y-55436467D01* +X140503485Y-55361049D01* +X140310193Y-55322600D01* +X140310191Y-55322600D01* +X140113109Y-55322600D01* +X140113106Y-55322600D01* +X139919815Y-55361049D01* +X139919813Y-55361049D01* +X139737736Y-55436467D01* +X139573868Y-55545961D01* +X139573864Y-55545964D01* +X139434514Y-55685314D01* +X139434511Y-55685318D01* +X139325017Y-55849186D01* +X139249599Y-56031263D01* +X139249599Y-56031265D01* +X139211150Y-56224556D01* +X138672149Y-56224556D01* +X138633701Y-56031265D01* +X138558282Y-55849186D01* +X138448789Y-55685318D01* +X138309432Y-55545961D01* +X138188407Y-55465095D01* +X138145563Y-55436467D01* +X137963485Y-55361049D01* +X137770193Y-55322600D01* +X137770191Y-55322600D01* +X137573109Y-55322600D01* +X137573106Y-55322600D01* +X137379815Y-55361049D01* +X137379813Y-55361049D01* +X137197736Y-55436467D01* +X137033868Y-55545961D01* +X137033864Y-55545964D01* +X136894514Y-55685314D01* +X136894511Y-55685318D01* +X136785017Y-55849186D01* +X136709599Y-56031263D01* +X136709599Y-56031265D01* +X136671150Y-56224556D01* +X136132149Y-56224556D01* +X136093701Y-56031265D01* +X136018282Y-55849186D01* +X135908789Y-55685318D01* +X135769432Y-55545961D01* +X135648407Y-55465095D01* +X135605563Y-55436467D01* +X135423485Y-55361049D01* +X135230193Y-55322600D01* +X135230191Y-55322600D01* +X135033109Y-55322600D01* +X135033106Y-55322600D01* +X134839815Y-55361049D01* +X134839813Y-55361049D01* +X134657736Y-55436467D01* +X134493868Y-55545961D01* +X134493864Y-55545964D01* +X134354514Y-55685314D01* +X134354511Y-55685318D01* +X134245017Y-55849186D01* +X134169599Y-56031263D01* +X134169599Y-56031265D01* +X134131150Y-56224556D01* +X133592149Y-56224556D01* +X133553701Y-56031265D01* +X133478282Y-55849186D01* +X133368789Y-55685318D01* +X133229432Y-55545961D01* +X133108407Y-55465095D01* +X133065563Y-55436467D01* +X132883485Y-55361049D01* +X132690193Y-55322600D01* +X132690191Y-55322600D01* +X132493109Y-55322600D01* +X132493106Y-55322600D01* +X132299815Y-55361049D01* +X132299813Y-55361049D01* +X132117736Y-55436467D01* +X131953868Y-55545961D01* +X131953864Y-55545964D01* +X131814514Y-55685314D01* +X131814511Y-55685318D01* +X131705017Y-55849186D01* +X131629599Y-56031263D01* +X131629599Y-56031265D01* +X131591150Y-56224556D01* +X131052149Y-56224556D01* +X131013701Y-56031265D01* +X130938282Y-55849186D01* +X130828789Y-55685318D01* +X130689432Y-55545961D01* +X130568407Y-55465095D01* +X130525563Y-55436467D01* +X130343485Y-55361049D01* +X130150193Y-55322600D01* +X130150191Y-55322600D01* +X129953109Y-55322600D01* +X129953106Y-55322600D01* +X129759815Y-55361049D01* +X129759813Y-55361049D01* +X129577736Y-55436467D01* +X129413868Y-55545961D01* +X129413864Y-55545964D01* +X129274514Y-55685314D01* +X129274511Y-55685318D01* +X129165017Y-55849186D01* +X129089599Y-56031263D01* +X129089599Y-56031265D01* +X129051150Y-56224556D01* +X128512149Y-56224556D01* +X128473701Y-56031265D01* +X128398282Y-55849186D01* +X128288789Y-55685318D01* +X128149432Y-55545961D01* +X128028407Y-55465095D01* +X127985563Y-55436467D01* +X127803485Y-55361049D01* +X127610193Y-55322600D01* +X127610191Y-55322600D01* +X127413109Y-55322600D01* +X127413106Y-55322600D01* +X127219815Y-55361049D01* +X127219813Y-55361049D01* +X127037736Y-55436467D01* +X126873868Y-55545961D01* +X126873864Y-55545964D01* +X126734514Y-55685314D01* +X126734511Y-55685318D01* +X126625017Y-55849186D01* +X126549599Y-56031263D01* +X126549599Y-56031265D01* +X126511150Y-56224556D01* +X125972149Y-56224556D01* +X125933701Y-56031265D01* +X125858282Y-55849186D01* +X125748789Y-55685318D01* +X125609432Y-55545961D01* +X125488407Y-55465095D01* +X125445563Y-55436467D01* +X125263485Y-55361049D01* +X125070193Y-55322600D01* +X125070191Y-55322600D01* +X124873109Y-55322600D01* +X124873106Y-55322600D01* +X124679815Y-55361049D01* +X124679813Y-55361049D01* +X124497736Y-55436467D01* +X124333868Y-55545961D01* +X124333864Y-55545964D01* +X124194514Y-55685314D01* +X124194511Y-55685318D01* +X124085017Y-55849186D01* +X124009599Y-56031263D01* +X124009599Y-56031265D01* +X123971150Y-56224556D01* +X123971150Y-56421643D01* +X124009599Y-56614934D01* +X124009599Y-56614936D01* +X124085017Y-56797014D01* +X124085019Y-56797016D01* +X124144453Y-56885966D01* +X124161062Y-56944854D01* +X124139884Y-57002257D01* +X124089011Y-57036250D01* +X124087818Y-57036578D01* +X124049910Y-57046735D01* +X124019059Y-57055002D01* +X123916341Y-57114307D01* +X123832457Y-57198191D01* +X123773152Y-57300909D01* +X123759721Y-57351036D01* +X123742450Y-57415491D01* +X80778694Y-57415491D01* +X80776716Y-55458272D01* +X106191150Y-55458272D01* +X106191150Y-57187927D01* +X106199882Y-57231820D01* +X106199884Y-57231824D01* +X106215437Y-57255100D01* +X106233146Y-57281604D01* +X106282928Y-57314867D01* +X106293977Y-57317064D01* +X106326822Y-57323599D01* +X106326828Y-57323599D01* +X106326830Y-57323600D01* +X106326831Y-57323600D01* +X108056469Y-57323600D01* +X108056470Y-57323600D01* +X108056471Y-57323599D01* +X108056477Y-57323599D01* +X108078273Y-57319262D01* +X108100372Y-57314867D01* +X108150154Y-57281604D01* +X108183417Y-57231822D01* +X108187812Y-57209723D01* +X108192149Y-57187927D01* +X108192150Y-57187918D01* +X108192150Y-56224556D01* +X108731150Y-56224556D01* +X108731150Y-56421643D01* +X108769599Y-56614934D01* +X108769599Y-56614936D01* +X108845017Y-56797013D01* +X108845018Y-56797014D01* +X108954511Y-56960882D01* +X109093868Y-57100239D01* +X109257736Y-57209732D01* +X109439815Y-57285151D01* +X109633109Y-57323600D01* +X109633110Y-57323600D01* +X109830190Y-57323600D01* +X109830191Y-57323600D01* +X110023485Y-57285151D01* +X110205564Y-57209732D01* +X110369432Y-57100239D01* +X110508789Y-56960882D01* +X110618282Y-56797014D01* +X110693701Y-56614935D01* +X110732150Y-56421641D01* +X110732150Y-56224559D01* +X110732149Y-56224556D01* +X111271150Y-56224556D01* +X111271150Y-56421643D01* +X111309599Y-56614934D01* +X111309599Y-56614936D01* +X111385017Y-56797013D01* +X111385018Y-56797014D01* +X111494511Y-56960882D01* +X111633868Y-57100239D01* +X111797736Y-57209732D01* +X111979815Y-57285151D01* +X112173109Y-57323600D01* +X112173110Y-57323600D01* +X112370190Y-57323600D01* +X112370191Y-57323600D01* +X112563485Y-57285151D01* +X112745564Y-57209732D01* +X112909432Y-57100239D01* +X113048789Y-56960882D01* +X113158282Y-56797014D01* +X113233701Y-56614935D01* +X113272150Y-56421641D01* +X113272150Y-56224559D01* +X113272149Y-56224556D01* +X113811150Y-56224556D01* +X113811150Y-56421643D01* +X113849599Y-56614934D01* +X113849599Y-56614936D01* +X113925017Y-56797013D01* +X113925018Y-56797014D01* +X114034511Y-56960882D01* +X114173868Y-57100239D01* +X114337736Y-57209732D01* +X114519815Y-57285151D01* +X114713109Y-57323600D01* +X114713110Y-57323600D01* +X114910190Y-57323600D01* +X114910191Y-57323600D01* +X115103485Y-57285151D01* +X115285564Y-57209732D01* +X115449432Y-57100239D01* +X115588789Y-56960882D01* +X115698282Y-56797014D01* +X115773701Y-56614935D01* +X115812150Y-56421641D01* +X115812150Y-56224559D01* +X115812149Y-56224556D01* +X116351150Y-56224556D01* +X116351150Y-56421643D01* +X116389599Y-56614934D01* +X116389599Y-56614936D01* +X116465017Y-56797013D01* +X116465018Y-56797014D01* +X116574511Y-56960882D01* +X116713868Y-57100239D01* +X116877736Y-57209732D01* +X117059815Y-57285151D01* +X117253109Y-57323600D01* +X117253110Y-57323600D01* +X117450190Y-57323600D01* +X117450191Y-57323600D01* +X117643485Y-57285151D01* +X117825564Y-57209732D01* +X117989432Y-57100239D01* +X118128789Y-56960882D01* +X118238282Y-56797014D01* +X118313701Y-56614935D01* +X118352150Y-56421641D01* +X118352150Y-56224559D01* +X118352149Y-56224556D01* +X118891150Y-56224556D01* +X118891150Y-56421643D01* +X118929599Y-56614934D01* +X118929599Y-56614936D01* +X119005017Y-56797013D01* +X119005018Y-56797014D01* +X119114511Y-56960882D01* +X119253868Y-57100239D01* +X119417736Y-57209732D01* +X119599815Y-57285151D01* +X119793109Y-57323600D01* +X119793110Y-57323600D01* +X119990190Y-57323600D01* +X119990191Y-57323600D01* +X120183485Y-57285151D01* +X120365564Y-57209732D01* +X120529432Y-57100239D01* +X120668789Y-56960882D01* +X120778282Y-56797014D01* +X120853701Y-56614935D01* +X120892150Y-56421641D01* +X120892150Y-56224559D01* +X120892149Y-56224556D01* +X121431150Y-56224556D01* +X121431150Y-56421643D01* +X121469599Y-56614934D01* +X121469599Y-56614936D01* +X121545017Y-56797013D01* +X121545018Y-56797014D01* +X121654511Y-56960882D01* +X121793868Y-57100239D01* +X121957736Y-57209732D01* +X122139815Y-57285151D01* +X122333109Y-57323600D01* +X122333110Y-57323600D01* +X122530190Y-57323600D01* +X122530191Y-57323600D01* +X122723485Y-57285151D01* +X122905564Y-57209732D01* +X123069432Y-57100239D01* +X123208789Y-56960882D01* +X123318282Y-56797014D01* +X123393701Y-56614935D01* +X123432150Y-56421641D01* +X123432150Y-56224559D01* +X123393701Y-56031265D01* +X123318282Y-55849186D01* +X123208789Y-55685318D01* +X123069432Y-55545961D01* +X122948407Y-55465095D01* +X122905563Y-55436467D01* +X122723485Y-55361049D01* +X122530193Y-55322600D01* +X122530191Y-55322600D01* +X122333109Y-55322600D01* +X122333106Y-55322600D01* +X122139815Y-55361049D01* +X122139813Y-55361049D01* +X121957736Y-55436467D01* +X121793868Y-55545961D01* +X121793864Y-55545964D01* +X121654514Y-55685314D01* +X121654511Y-55685318D01* +X121545017Y-55849186D01* +X121469599Y-56031263D01* +X121469599Y-56031265D01* +X121431150Y-56224556D01* +X120892149Y-56224556D01* +X120853701Y-56031265D01* +X120778282Y-55849186D01* +X120668789Y-55685318D01* +X120529432Y-55545961D01* +X120408407Y-55465095D01* +X120365563Y-55436467D01* +X120183485Y-55361049D01* +X119990193Y-55322600D01* +X119990191Y-55322600D01* +X119793109Y-55322600D01* +X119793106Y-55322600D01* +X119599815Y-55361049D01* +X119599813Y-55361049D01* +X119417736Y-55436467D01* +X119253868Y-55545961D01* +X119253864Y-55545964D01* +X119114514Y-55685314D01* +X119114511Y-55685318D01* +X119005017Y-55849186D01* +X118929599Y-56031263D01* +X118929599Y-56031265D01* +X118891150Y-56224556D01* +X118352149Y-56224556D01* +X118313701Y-56031265D01* +X118238282Y-55849186D01* +X118128789Y-55685318D01* +X117989432Y-55545961D01* +X117868407Y-55465095D01* +X117825563Y-55436467D01* +X117643485Y-55361049D01* +X117450193Y-55322600D01* +X117450191Y-55322600D01* +X117253109Y-55322600D01* +X117253106Y-55322600D01* +X117059815Y-55361049D01* +X117059813Y-55361049D01* +X116877736Y-55436467D01* +X116713868Y-55545961D01* +X116713864Y-55545964D01* +X116574514Y-55685314D01* +X116574511Y-55685318D01* +X116465017Y-55849186D01* +X116389599Y-56031263D01* +X116389599Y-56031265D01* +X116351150Y-56224556D01* +X115812149Y-56224556D01* +X115773701Y-56031265D01* +X115698282Y-55849186D01* +X115588789Y-55685318D01* +X115449432Y-55545961D01* +X115328407Y-55465095D01* +X115285563Y-55436467D01* +X115103485Y-55361049D01* +X114910193Y-55322600D01* +X114910191Y-55322600D01* +X114713109Y-55322600D01* +X114713106Y-55322600D01* +X114519815Y-55361049D01* +X114519813Y-55361049D01* +X114337736Y-55436467D01* +X114173868Y-55545961D01* +X114173864Y-55545964D01* +X114034514Y-55685314D01* +X114034511Y-55685318D01* +X113925017Y-55849186D01* +X113849599Y-56031263D01* +X113849599Y-56031265D01* +X113811150Y-56224556D01* +X113272149Y-56224556D01* +X113233701Y-56031265D01* +X113158282Y-55849186D01* +X113048789Y-55685318D01* +X112909432Y-55545961D01* +X112788407Y-55465095D01* +X112745563Y-55436467D01* +X112563485Y-55361049D01* +X112370193Y-55322600D01* +X112370191Y-55322600D01* +X112173109Y-55322600D01* +X112173106Y-55322600D01* +X111979815Y-55361049D01* +X111979813Y-55361049D01* +X111797736Y-55436467D01* +X111633868Y-55545961D01* +X111633864Y-55545964D01* +X111494514Y-55685314D01* +X111494511Y-55685318D01* +X111385017Y-55849186D01* +X111309599Y-56031263D01* +X111309599Y-56031265D01* +X111271150Y-56224556D01* +X110732149Y-56224556D01* +X110693701Y-56031265D01* +X110618282Y-55849186D01* +X110508789Y-55685318D01* +X110369432Y-55545961D01* +X110248407Y-55465095D01* +X110205563Y-55436467D01* +X110023485Y-55361049D01* +X109830193Y-55322600D01* +X109830191Y-55322600D01* +X109633109Y-55322600D01* +X109633106Y-55322600D01* +X109439815Y-55361049D01* +X109439813Y-55361049D01* +X109257736Y-55436467D01* +X109093868Y-55545961D01* +X109093864Y-55545964D01* +X108954514Y-55685314D01* +X108954511Y-55685318D01* +X108845017Y-55849186D01* +X108769599Y-56031263D01* +X108769599Y-56031265D01* +X108731150Y-56224556D01* +X108192150Y-56224556D01* +X108192150Y-55458281D01* +X108192149Y-55458272D01* +X108183417Y-55414379D01* +X108183415Y-55414375D01* +X108161911Y-55382192D01* +X108150154Y-55364596D01* +X108149490Y-55364152D01* +X108100374Y-55331334D01* +X108100370Y-55331332D01* +X108056477Y-55322600D01* +X108056470Y-55322600D01* +X106326830Y-55322600D01* +X106326822Y-55322600D01* +X106282929Y-55331332D01* +X106282925Y-55331334D01* +X106233148Y-55364594D01* +X106233144Y-55364598D01* +X106199884Y-55414375D01* +X106199882Y-55414379D01* +X106191150Y-55458272D01* +X80776716Y-55458272D01* +X80776102Y-54850772D01* +X188133650Y-54850772D01* +X188133650Y-56880427D01* +X188142382Y-56924320D01* +X188142384Y-56924324D01* +X188166811Y-56960882D01* +X188175646Y-56974104D01* +X188225428Y-57007367D01* +X188236477Y-57009564D01* +X188269322Y-57016099D01* +X188269328Y-57016099D01* +X188269330Y-57016100D01* +X188269331Y-57016100D01* +X190298969Y-57016100D01* +X190298970Y-57016100D01* +X190298971Y-57016099D01* +X190298977Y-57016099D01* +X190320773Y-57011762D01* +X190342872Y-57007367D01* +X190392654Y-56974104D01* +X190425917Y-56924322D01* +X190434650Y-56880420D01* +X190434650Y-55775050D01* +X193213650Y-55775050D01* +X193213650Y-55956149D01* +X193241978Y-56135006D01* +X193297938Y-56307237D01* +X193367115Y-56443005D01* +X193380154Y-56468594D01* +X193486597Y-56615101D01* +X193614649Y-56743153D01* +X193761156Y-56849596D01* +X193922511Y-56931811D01* +X194094741Y-56987771D01* +X194166286Y-56999102D01* +X194273601Y-57016100D01* +X194273604Y-57016100D01* +X194454699Y-57016100D01* +X194544127Y-57001935D01* +X194633559Y-56987771D01* +X194729706Y-56956531D01* +X194751797Y-56949354D01* +X194765646Y-56944854D01* +X194805789Y-56931811D01* +X194967144Y-56849596D01* +X195113651Y-56743153D01* +X195241703Y-56615101D01* +X195272219Y-56573099D01* +X208739418Y-56573099D01* +X208739419Y-56573100D01* +X209787504Y-56573100D01* +X209749020Y-56639757D01* +X209716650Y-56760565D01* +X209716650Y-56885635D01* +X209749020Y-57006443D01* +X209787504Y-57073100D01* +X208739419Y-57073100D01* +X208749891Y-57139222D01* +X208815554Y-57341315D01* +X208912025Y-57530652D01* +X209036927Y-57702564D01* +X209187185Y-57852822D01* +X209359097Y-57977724D01* +X209548434Y-58074195D01* +X209750528Y-58139859D01* +X209835556Y-58153326D01* +X209890072Y-58181103D01* +X209917850Y-58235620D01* +X209908279Y-58296052D01* +X209865014Y-58339317D01* +X209839384Y-58348205D01* +X209774813Y-58361049D01* +X209592736Y-58436467D01* +X209428868Y-58545961D01* +X209428864Y-58545964D01* +X209289514Y-58685314D01* +X209289511Y-58685318D01* +X209180017Y-58849186D01* +X209104599Y-59031263D01* +X209104599Y-59031265D01* +X209066150Y-59224556D01* +X209066150Y-59421643D01* +X209104599Y-59614934D01* +X209104599Y-59614936D01* +X209180017Y-59797013D01* +X209180018Y-59797014D01* +X209289511Y-59960882D01* +X209428868Y-60100239D01* +X209592736Y-60209732D01* +X209774815Y-60285151D01* +X209968109Y-60323600D01* +X209968110Y-60323600D01* +X210415190Y-60323600D01* +X210415191Y-60323600D01* +X210608485Y-60285151D01* +X210790564Y-60209732D01* +X210954432Y-60100239D01* +X211093789Y-59960882D01* +X211203282Y-59797014D01* +X211278701Y-59614935D01* +X211317150Y-59421641D01* +X211317150Y-59224559D01* +X211278701Y-59031265D01* +X211203282Y-58849186D01* +X211093789Y-58685318D01* +X210954432Y-58545961D01* +X210790564Y-58436468D01* +X210790565Y-58436468D01* +X210790563Y-58436467D01* +X210608486Y-58361049D01* +X210543915Y-58348205D01* +X210490531Y-58318308D01* +X210464916Y-58262742D01* +X210476853Y-58202733D01* +X210521783Y-58161200D01* +X210547743Y-58153326D01* +X210632771Y-58139859D01* +X210834865Y-58074195D01* +X211024202Y-57977724D01* +X211196114Y-57852822D01* +X211346372Y-57702564D01* +X211471274Y-57530652D01* +X211567745Y-57341315D01* +X211633408Y-57139222D01* +X211643881Y-57073100D01* +X210595796Y-57073100D01* +X210634280Y-57006443D01* +X210666650Y-56885635D01* +X210666650Y-56760565D01* +X210634280Y-56639757D01* +X210595796Y-56573100D01* +X211643881Y-56573100D01* +X211643881Y-56573099D01* +X211633408Y-56506977D01* +X211567745Y-56304884D01* +X211471274Y-56115547D01* +X211346372Y-55943635D01* +X211196114Y-55793377D01* +X211024202Y-55668475D01* +X210834865Y-55572004D01* +X210632772Y-55506341D01* +X210547742Y-55492873D01* +X210493226Y-55465095D01* +X210465449Y-55410578D01* +X210475021Y-55350146D01* +X210518286Y-55306882D01* +X210543913Y-55297995D01* +X210608485Y-55285151D01* +X210790564Y-55209732D01* +X210954432Y-55100239D01* +X211093789Y-54960882D01* +X211203282Y-54797014D01* +X211278701Y-54614935D01* +X211317150Y-54421641D01* +X211317150Y-54224559D01* +X211278701Y-54031265D01* +X211203282Y-53849186D01* +X211093789Y-53685318D01* +X210954432Y-53545961D01* +X210790564Y-53436468D01* +X210790565Y-53436468D01* +X210790563Y-53436467D01* +X210608485Y-53361049D01* +X210415193Y-53322600D01* +X210415191Y-53322600D01* +X209968109Y-53322600D01* +X209968106Y-53322600D01* +X209774815Y-53361049D01* +X209774813Y-53361049D01* +X209592736Y-53436467D01* +X209428868Y-53545961D01* +X209428864Y-53545964D01* +X209289514Y-53685314D01* +X209289511Y-53685318D01* +X209180017Y-53849186D01* +X209104599Y-54031263D01* +X209104599Y-54031265D01* +X209066150Y-54224556D01* +X209066150Y-54421643D01* +X209104599Y-54614934D01* +X209104599Y-54614936D01* +X209180017Y-54797013D01* +X209215938Y-54850772D01* +X209289511Y-54960882D01* +X209428868Y-55100239D01* +X209592736Y-55209732D01* +X209774815Y-55285151D01* +X209839384Y-55297994D01* +X209892767Y-55327891D01* +X209918383Y-55383456D01* +X209906446Y-55443465D01* +X209861517Y-55484998D01* +X209835557Y-55492873D01* +X209750527Y-55506341D01* +X209548434Y-55572004D01* +X209359097Y-55668475D01* +X209187185Y-55793377D01* +X209036927Y-55943635D01* +X208912025Y-56115547D01* +X208815554Y-56304884D01* +X208749891Y-56506977D01* +X208739418Y-56573099D01* +X195272219Y-56573099D01* +X195348146Y-56468594D01* +X195430361Y-56307239D01* +X195486321Y-56135009D01* +X195502753Y-56031263D01* +X195514650Y-55956149D01* +X195514650Y-55775050D01* +X195493134Y-55639208D01* +X195486321Y-55596191D01* +X195430361Y-55423961D01* +X195348146Y-55262606D01* +X195241703Y-55116099D01* +X195113651Y-54988047D01* +X194967144Y-54881604D01* +X194967143Y-54881603D01* +X194967141Y-54881602D01* +X194805787Y-54799388D01* +X194633556Y-54743428D01* +X194454699Y-54715100D01* +X194454696Y-54715100D01* +X194273604Y-54715100D01* +X194273601Y-54715100D01* +X194094743Y-54743428D01* +X193922512Y-54799388D01* +X193761158Y-54881602D01* +X193687902Y-54934825D01* +X193614649Y-54988047D01* +X193486597Y-55116099D01* +X193451151Y-55164887D01* +X193380152Y-55262608D01* +X193297938Y-55423962D01* +X193241978Y-55596193D01* +X193213650Y-55775050D01* +X190434650Y-55775050D01* +X190434650Y-54850780D01* +X190434649Y-54850778D01* +X190434649Y-54850772D01* +X190425917Y-54806879D01* +X190425915Y-54806875D01* +X190392655Y-54757098D01* +X190392654Y-54757096D01* +X190372198Y-54743428D01* +X190342874Y-54723834D01* +X190342870Y-54723832D01* +X190298977Y-54715100D01* +X190298970Y-54715100D01* +X188269330Y-54715100D01* +X188269322Y-54715100D01* +X188225429Y-54723832D01* +X188225425Y-54723834D01* +X188175648Y-54757094D01* +X188175644Y-54757098D01* +X188142384Y-54806875D01* +X188142382Y-54806879D01* +X188133650Y-54850772D01* +X80776102Y-54850772D01* +X80774521Y-53286991D01* +X172956150Y-53286991D01* +X172956150Y-53405609D01* +X172964419Y-53436468D01* +X172986852Y-53520190D01* +X173046157Y-53622908D01* +X173046159Y-53622910D01* +X173046161Y-53622913D01* +X173130037Y-53706789D01* +X173130039Y-53706790D01* +X173130041Y-53706792D01* +X173232760Y-53766097D01* +X173232761Y-53766097D01* +X173232764Y-53766099D01* +X173347341Y-53796800D01* +X173347343Y-53796800D01* +X173465957Y-53796800D01* +X173465959Y-53796800D01* +X173580536Y-53766099D01* +X173580538Y-53766097D01* +X173580540Y-53766097D01* +X173683258Y-53706792D01* +X173683258Y-53706791D01* +X173683263Y-53706789D01* +X173767139Y-53622913D01* +X173826449Y-53520186D01* +X173857150Y-53405609D01* +X173857150Y-53286991D01* +X173826449Y-53172414D01* +X173826447Y-53172411D01* +X173826447Y-53172409D01* +X173767142Y-53069691D01* +X173767140Y-53069689D01* +X173767139Y-53069687D01* +X173683263Y-52985811D01* +X173683260Y-52985809D01* +X173683258Y-52985807D01* +X173580539Y-52926502D01* +X173580540Y-52926502D01* +X173567001Y-52922874D01* +X173465959Y-52895800D01* +X173347341Y-52895800D01* +X173277217Y-52914589D01* +X173232759Y-52926502D01* +X173130041Y-52985807D01* +X173046157Y-53069691D01* +X172986852Y-53172409D01* +X172986851Y-53172414D01* +X172956150Y-53286991D01* +X80774521Y-53286991D01* +X80772509Y-51296849D01* +X109841650Y-51296849D01* +X109841650Y-51509350D01* +X109874890Y-51719221D01* +X109940554Y-51921315D01* +X110037026Y-52110653D01* +X110037030Y-52110659D01* +X110076378Y-52164816D01* +X110076379Y-52164816D01* +X110708687Y-51532507D01* +X110725725Y-51596093D01* +X110791551Y-51710107D01* +X110884643Y-51803199D01* +X110998657Y-51869025D01* +X111062239Y-51886062D01* +X110429932Y-52518369D01* +X110429932Y-52518370D01* +X110484090Y-52557719D01* +X110484096Y-52557723D01* +X110673434Y-52654195D01* +X110875528Y-52719859D01* +X111085400Y-52753100D01* +X111297900Y-52753100D01* +X111507771Y-52719859D01* +X111709865Y-52654195D01* +X111899206Y-52557720D01* +X111953366Y-52518370D01* +X111321058Y-51886062D01* +X111384643Y-51869025D01* +X111498657Y-51803199D01* +X111591749Y-51710107D01* +X111657575Y-51596093D01* +X111674612Y-51532508D01* +X112306920Y-52164816D01* +X112346270Y-52110656D01* +X112442745Y-51921315D01* +X112508409Y-51719221D01* +X112541650Y-51509350D01* +X112541650Y-51491191D01* +X151766450Y-51491191D01* +X151766450Y-51609809D01* +X151793325Y-51710107D01* +X151797152Y-51724390D01* +X151856457Y-51827108D01* +X151856459Y-51827110D01* +X151856461Y-51827113D01* +X151940337Y-51910989D01* +X151940339Y-51910990D01* +X151940341Y-51910992D01* +X152043060Y-51970297D01* +X152043061Y-51970297D01* +X152043064Y-51970299D01* +X152157641Y-52001000D01* +X152157643Y-52001000D01* +X152276257Y-52001000D01* +X152276259Y-52001000D01* +X152390836Y-51970299D01* +X152390838Y-51970297D01* +X152390840Y-51970297D01* +X152493558Y-51910992D01* +X152493558Y-51910991D01* +X152493563Y-51910989D01* +X152577439Y-51827113D01* +X152608690Y-51772986D01* +X152636747Y-51724390D01* +X152636747Y-51724388D01* +X152636749Y-51724386D01* +X152667450Y-51609809D01* +X152667450Y-51539791D01* +X183194250Y-51539791D01* +X183194250Y-51658409D01* +X183208103Y-51710107D01* +X183224952Y-51772990D01* +X183284257Y-51875708D01* +X183284259Y-51875710D01* +X183284261Y-51875713D01* +X183368137Y-51959589D01* +X183368139Y-51959590D01* +X183368141Y-51959592D01* +X183470860Y-52018897D01* +X183470861Y-52018897D01* +X183470864Y-52018899D01* +X183585441Y-52049600D01* +X183585443Y-52049600D01* +X183704057Y-52049600D01* +X183704059Y-52049600D01* +X183818636Y-52018899D01* +X183818638Y-52018897D01* +X183818640Y-52018897D01* +X183921358Y-51959592D01* +X183921358Y-51959591D01* +X183921363Y-51959589D01* +X184005239Y-51875713D01* +X184009100Y-51869025D01* +X184064547Y-51772990D01* +X184064547Y-51772988D01* +X184064549Y-51772986D01* +X184095250Y-51658409D01* +X184095250Y-51539791D01* +X184064549Y-51425214D01* +X184064547Y-51425211D01* +X184064547Y-51425209D01* +X184005242Y-51322491D01* +X184005240Y-51322489D01* +X184005239Y-51322487D01* +X183921363Y-51238611D01* +X183921360Y-51238609D01* +X183921358Y-51238607D01* +X183818639Y-51179302D01* +X183818640Y-51179302D01* +X183805101Y-51175674D01* +X183704059Y-51148600D01* +X183585441Y-51148600D01* +X183515317Y-51167389D01* +X183470859Y-51179302D01* +X183368141Y-51238607D01* +X183284257Y-51322491D01* +X183224952Y-51425209D01* +X183224951Y-51425214D01* +X183194250Y-51539791D01* +X152667450Y-51539791D01* +X152667450Y-51491191D01* +X152636749Y-51376614D01* +X152636747Y-51376611D01* +X152636747Y-51376609D01* +X152577442Y-51273891D01* +X152577440Y-51273889D01* +X152577439Y-51273887D01* +X152493563Y-51190011D01* +X152493560Y-51190009D01* +X152493558Y-51190007D01* +X152390839Y-51130702D01* +X152390840Y-51130702D01* +X152377301Y-51127074D01* +X152276259Y-51100000D01* +X152157641Y-51100000D01* +X152087517Y-51118789D01* +X152043059Y-51130702D01* +X151940341Y-51190007D01* +X151856457Y-51273891D01* +X151797152Y-51376609D01* +X151797151Y-51376614D01* +X151766450Y-51491191D01* +X112541650Y-51491191D01* +X112541650Y-51296849D01* +X112508408Y-51086976D01* +X112467865Y-50962194D01* +X112460033Y-50938091D01* +X189112250Y-50938091D01* +X189112250Y-51056709D01* +X189136872Y-51148600D01* +X189142952Y-51171290D01* +X189202257Y-51274008D01* +X189202259Y-51274010D01* +X189202261Y-51274013D01* +X189286137Y-51357889D01* +X189286139Y-51357890D01* +X189286141Y-51357892D01* +X189388860Y-51417197D01* +X189388861Y-51417197D01* +X189388864Y-51417199D01* +X189503441Y-51447900D01* +X189503443Y-51447900D01* +X189622057Y-51447900D01* +X189622059Y-51447900D01* +X189736636Y-51417199D01* +X189736638Y-51417197D01* +X189736640Y-51417197D01* +X189839358Y-51357892D01* +X189839358Y-51357891D01* +X189839363Y-51357889D01* +X189923239Y-51274013D01* +X189923242Y-51274008D01* +X189982547Y-51171290D01* +X189982547Y-51171288D01* +X189982549Y-51171286D01* +X190013250Y-51056709D01* +X190013250Y-50938091D01* +X189982549Y-50823514D01* +X189982547Y-50823511D01* +X189982547Y-50823509D01* +X189923242Y-50720791D01* +X189923240Y-50720789D01* +X189923239Y-50720787D01* +X189839363Y-50636911D01* +X189839360Y-50636909D01* +X189839358Y-50636907D01* +X189736639Y-50577602D01* +X189736640Y-50577602D01* +X189723101Y-50573974D01* +X189622059Y-50546900D01* +X189503441Y-50546900D01* +X189433317Y-50565689D01* +X189388859Y-50577602D01* +X189286141Y-50636907D01* +X189202257Y-50720791D01* +X189142952Y-50823509D01* +X189142951Y-50823514D01* +X189112250Y-50938091D01* +X112460033Y-50938091D01* +X112442745Y-50884884D01* +X112346273Y-50695546D01* +X112346269Y-50695540D01* +X112306920Y-50641382D01* +X112306919Y-50641382D01* +X111674612Y-51273689D01* +X111657575Y-51210107D01* +X111591749Y-51096093D01* +X111498657Y-51003001D01* +X111384643Y-50937175D01* +X111321057Y-50920137D01* +X111953366Y-50287829D01* +X111953366Y-50287828D01* +X111899209Y-50248480D01* +X111899203Y-50248476D01* +X111709865Y-50152004D01* +X111507771Y-50086340D01* +X111310793Y-50055142D01* +X111256276Y-50027364D01* +X111228499Y-49972848D01* +X111238070Y-49912416D01* +X111281335Y-49869151D01* +X111306964Y-49860263D01* +X111483485Y-49825151D01* +X111665564Y-49749732D01* +X111690020Y-49733391D01* +X172921650Y-49733391D01* +X172921650Y-49852009D01* +X172933038Y-49894509D01* +X172952352Y-49966590D01* +X173011657Y-50069308D01* +X173011659Y-50069310D01* +X173011661Y-50069313D01* +X173095537Y-50153189D01* +X173095539Y-50153190D01* +X173095541Y-50153192D01* +X173198260Y-50212497D01* +X173198261Y-50212497D01* +X173198264Y-50212499D01* +X173312841Y-50243200D01* +X173312843Y-50243200D01* +X173431457Y-50243200D01* +X173431459Y-50243200D01* +X173546036Y-50212499D01* +X173546038Y-50212497D01* +X173546040Y-50212497D01* +X173648758Y-50153192D01* +X173648758Y-50153191D01* +X173648763Y-50153189D01* +X173732639Y-50069313D01* +X173740821Y-50055142D01* +X173791947Y-49966590D01* +X173791947Y-49966588D01* +X173791949Y-49966586D01* +X173822650Y-49852009D01* +X173822650Y-49775891D01* +X179152850Y-49775891D01* +X179152850Y-49894509D01* +X179172163Y-49966586D01* +X179183552Y-50009090D01* +X179242857Y-50111808D01* +X179242859Y-50111810D01* +X179242861Y-50111813D01* +X179326737Y-50195689D01* +X179326739Y-50195690D01* +X179326741Y-50195692D01* +X179429460Y-50254997D01* +X179429461Y-50254997D01* +X179429464Y-50254999D01* +X179544041Y-50285700D01* +X179544043Y-50285700D01* +X179662657Y-50285700D01* +X179662659Y-50285700D01* +X179777236Y-50254999D01* +X179777238Y-50254997D01* +X179777240Y-50254997D01* +X179879958Y-50195692D01* +X179879958Y-50195691D01* +X179879963Y-50195689D01* +X179963839Y-50111813D01* +X179988380Y-50069308D01* +X180023146Y-50009091D01* +X180023145Y-50009091D01* +X180023149Y-50009086D01* +X180027569Y-49992591D01* +X190080350Y-49992591D01* +X190080350Y-50111209D01* +X190102987Y-50195692D01* +X190111052Y-50225790D01* +X190170357Y-50328508D01* +X190170359Y-50328510D01* +X190170361Y-50328513D01* +X190254237Y-50412389D01* +X190254239Y-50412390D01* +X190254241Y-50412392D01* +X190356960Y-50471697D01* +X190356961Y-50471697D01* +X190356964Y-50471699D01* +X190471541Y-50502400D01* +X190471543Y-50502400D01* +X190590157Y-50502400D01* +X190590159Y-50502400D01* +X190704736Y-50471699D01* +X190704738Y-50471697D01* +X190704740Y-50471697D01* +X190807458Y-50412392D01* +X190807458Y-50412391D01* +X190807463Y-50412389D01* +X190891339Y-50328513D01* +X190914829Y-50287828D01* +X190950647Y-50225790D01* +X190950647Y-50225788D01* +X190950649Y-50225786D01* +X190981350Y-50111209D01* +X190981350Y-49992591D01* +X190950649Y-49878014D01* +X190950647Y-49878011D01* +X190950647Y-49878009D01* +X190891342Y-49775291D01* +X190891340Y-49775289D01* +X190891339Y-49775287D01* +X190807463Y-49691411D01* +X190807460Y-49691409D01* +X190807458Y-49691407D01* +X190704739Y-49632102D01* +X190704740Y-49632102D01* +X190691201Y-49628474D01* +X190590159Y-49601400D01* +X190471541Y-49601400D01* +X190401417Y-49620189D01* +X190356959Y-49632102D01* +X190254241Y-49691407D01* +X190170357Y-49775291D01* +X190111052Y-49878009D01* +X190106631Y-49894509D01* +X190080350Y-49992591D01* +X180027569Y-49992591D01* +X180053850Y-49894509D01* +X180053850Y-49775891D01* +X180023149Y-49661314D01* +X180023147Y-49661311D01* +X180023147Y-49661309D01* +X179963842Y-49558591D01* +X179963840Y-49558589D01* +X179963839Y-49558587D01* +X179879963Y-49474711D01* +X179879960Y-49474709D01* +X179879958Y-49474707D01* +X179777239Y-49415402D01* +X179777240Y-49415402D01* +X179763701Y-49411774D01* +X179662659Y-49384700D01* +X179544041Y-49384700D01* +X179473917Y-49403489D01* +X179429459Y-49415402D01* +X179326741Y-49474707D01* +X179242857Y-49558591D01* +X179183552Y-49661309D01* +X179175486Y-49691411D01* +X179152850Y-49775891D01* +X173822650Y-49775891D01* +X173822650Y-49733391D01* +X173791949Y-49618814D01* +X173791947Y-49618811D01* +X173791947Y-49618809D01* +X173732642Y-49516091D01* +X173732640Y-49516089D01* +X173732639Y-49516087D01* +X173648763Y-49432211D01* +X173648760Y-49432209D01* +X173648758Y-49432207D01* +X173546039Y-49372902D01* +X173546040Y-49372902D01* +X173532501Y-49369274D01* +X173431459Y-49342200D01* +X173312841Y-49342200D01* +X173242717Y-49360989D01* +X173198259Y-49372902D01* +X173095541Y-49432207D01* +X173011657Y-49516091D01* +X172952352Y-49618809D01* +X172948790Y-49632102D01* +X172921650Y-49733391D01* +X111690020Y-49733391D01* +X111829432Y-49640239D01* +X111968789Y-49500882D01* +X112078282Y-49337014D01* +X112153701Y-49154935D01* +X112192150Y-48961641D01* +X112192150Y-48764559D01* +X112153701Y-48571265D01* +X112078282Y-48389186D01* +X112032382Y-48320491D01* +X114307650Y-48320491D01* +X114307650Y-48439109D01* +X114315179Y-48467207D01* +X114338352Y-48553690D01* +X114397657Y-48656408D01* +X114397659Y-48656410D01* +X114397661Y-48656413D01* +X114481537Y-48740289D01* +X114481539Y-48740290D01* +X114481541Y-48740292D01* +X114584260Y-48799597D01* +X114584261Y-48799597D01* +X114584264Y-48799599D01* +X114698841Y-48830300D01* +X114698843Y-48830300D01* +X114817457Y-48830300D01* +X114817459Y-48830300D01* +X114932036Y-48799599D01* +X114932038Y-48799597D01* +X114932040Y-48799597D01* +X114986090Y-48768391D01* +X195567450Y-48768391D01* +X195567450Y-48887009D01* +X195582453Y-48943000D01* +X195598152Y-49001590D01* +X195657457Y-49104308D01* +X195657459Y-49104310D01* +X195657461Y-49104313D01* +X195741337Y-49188189D01* +X195741339Y-49188190D01* +X195741341Y-49188192D01* +X195844060Y-49247497D01* +X195844061Y-49247497D01* +X195844064Y-49247499D01* +X195958641Y-49278200D01* +X195958643Y-49278200D01* +X196077257Y-49278200D01* +X196077259Y-49278200D01* +X196191836Y-49247499D01* +X196191838Y-49247497D01* +X196191840Y-49247497D01* +X196294558Y-49188192D01* +X196294558Y-49188191D01* +X196294563Y-49188189D01* +X196378439Y-49104313D01* +X196437749Y-49001586D01* +X196468450Y-48887009D01* +X196468450Y-48768391D01* +X196437749Y-48653814D01* +X196437747Y-48653811D01* +X196437747Y-48653809D01* +X196378442Y-48551091D01* +X196378440Y-48551089D01* +X196378439Y-48551087D01* +X196294563Y-48467211D01* +X196294560Y-48467209D01* +X196294558Y-48467207D01* +X196235641Y-48433191D01* +X199556750Y-48433191D01* +X199556750Y-48551809D01* +X199583824Y-48652851D01* +X199587452Y-48666390D01* +X199646757Y-48769108D01* +X199646759Y-48769110D01* +X199646761Y-48769113D01* +X199730637Y-48852989D01* +X199730639Y-48852990D01* +X199730641Y-48852992D01* +X199833360Y-48912297D01* +X199833361Y-48912297D01* +X199833364Y-48912299D01* +X199947941Y-48943000D01* +X199947943Y-48943000D01* +X200066557Y-48943000D01* +X200066559Y-48943000D01* +X200181136Y-48912299D01* +X200181138Y-48912297D01* +X200181140Y-48912297D01* +X200283858Y-48852992D01* +X200283858Y-48852991D01* +X200283863Y-48852989D01* +X200367739Y-48769113D01* +X200427049Y-48666386D01* +X200457750Y-48551809D01* +X200457750Y-48433191D01* +X200427049Y-48318614D01* +X200427047Y-48318611D01* +X200427047Y-48318609D01* +X200367742Y-48215891D01* +X200367740Y-48215889D01* +X200367739Y-48215887D01* +X200283863Y-48132011D01* +X200283860Y-48132009D01* +X200283858Y-48132007D01* +X200181139Y-48072702D01* +X200181140Y-48072702D01* +X200167601Y-48069074D01* +X200066559Y-48042000D01* +X199947941Y-48042000D01* +X199877817Y-48060789D01* +X199833359Y-48072702D01* +X199730641Y-48132007D01* +X199646757Y-48215891D01* +X199587452Y-48318609D01* +X199573949Y-48369004D01* +X199556750Y-48433191D01* +X196235641Y-48433191D01* +X196191839Y-48407902D01* +X196191840Y-48407902D01* +X196178301Y-48404274D01* +X196077259Y-48377200D01* +X195958641Y-48377200D01* +X195888517Y-48395989D01* +X195844059Y-48407902D01* +X195741341Y-48467207D01* +X195657457Y-48551091D01* +X195598152Y-48653809D01* +X195594782Y-48666386D01* +X195567450Y-48768391D01* +X114986090Y-48768391D01* +X115034758Y-48740292D01* +X115034758Y-48740291D01* +X115034763Y-48740289D01* +X115118639Y-48656413D01* +X115120140Y-48653814D01* +X115177947Y-48553690D01* +X115177947Y-48553688D01* +X115177949Y-48553686D01* +X115208650Y-48439109D01* +X115208650Y-48320491D01* +X115177949Y-48205914D01* +X115177947Y-48205911D01* +X115177947Y-48205909D01* +X115118642Y-48103191D01* +X115118640Y-48103189D01* +X115118639Y-48103187D01* +X115034763Y-48019311D01* +X115034760Y-48019309D01* +X115034758Y-48019307D01* +X114932039Y-47960002D01* +X114932040Y-47960002D01* +X114918501Y-47956374D01* +X114817459Y-47929300D01* +X114698841Y-47929300D01* +X114628717Y-47948089D01* +X114584259Y-47960002D01* +X114481541Y-48019307D01* +X114397657Y-48103191D01* +X114338352Y-48205909D01* +X114321187Y-48269969D01* +X114307650Y-48320491D01* +X112032382Y-48320491D01* +X111968789Y-48225318D01* +X111829432Y-48085961D01* +X111665564Y-47976468D01* +X111665565Y-47976468D01* +X111665563Y-47976467D01* +X111483485Y-47901049D01* +X111290193Y-47862600D01* +X111290191Y-47862600D01* +X111093109Y-47862600D01* +X111093106Y-47862600D01* +X110899815Y-47901049D01* +X110899813Y-47901049D01* +X110717736Y-47976467D01* +X110553868Y-48085961D01* +X110553864Y-48085964D01* +X110414514Y-48225314D01* +X110414511Y-48225318D01* +X110305017Y-48389186D01* +X110229599Y-48571263D01* +X110229599Y-48571265D01* +X110191150Y-48764556D01* +X110191150Y-48961643D01* +X110229599Y-49154934D01* +X110229599Y-49154936D01* +X110305017Y-49337013D01* +X110336881Y-49384700D01* +X110414511Y-49500882D01* +X110553868Y-49640239D01* +X110717736Y-49749732D01* +X110899815Y-49825151D01* +X111076333Y-49860263D01* +X111129717Y-49890160D01* +X111155333Y-49945725D01* +X111143396Y-50005735D01* +X111098466Y-50047267D01* +X111072506Y-50055142D01* +X110875528Y-50086340D01* +X110673434Y-50152004D01* +X110484096Y-50248476D01* +X110484092Y-50248478D01* +X110429932Y-50287828D01* +X111062241Y-50920137D01* +X110998657Y-50937175D01* +X110884643Y-51003001D01* +X110791551Y-51096093D01* +X110725725Y-51210107D01* +X110708687Y-51273691D01* +X110076378Y-50641382D01* +X110037028Y-50695542D01* +X110037026Y-50695546D01* +X109940554Y-50884884D01* +X109874890Y-51086978D01* +X109841650Y-51296849D01* +X80772509Y-51296849D01* +X80766348Y-45201810D01* +X83341150Y-45201810D01* +X83341150Y-45444389D01* +X83372811Y-45684881D01* +X83372811Y-45684886D01* +X83403547Y-45799591D01* +X83435364Y-45918336D01* +X83435594Y-45919192D01* +X83435598Y-45919205D01* +X83528422Y-46143304D01* +X83528424Y-46143308D01* +X83528426Y-46143312D01* +X83649714Y-46353389D01* +X83649716Y-46353392D01* +X83797379Y-46545831D01* +X83797381Y-46545833D01* +X83797385Y-46545838D01* +X83968912Y-46717365D01* +X83968916Y-46717368D01* +X83968918Y-46717370D01* +X84071746Y-46796272D01* +X84161361Y-46865036D01* +X84371438Y-46986324D01* +X84595550Y-47079154D01* +X84829861Y-47141938D01* +X85070362Y-47173600D01* +X85070363Y-47173600D01* +X85312937Y-47173600D01* +X85312938Y-47173600D01* +X85553439Y-47141938D01* +X85787750Y-47079154D01* +X86011862Y-46986324D01* +X86221939Y-46865036D01* +X86414388Y-46717365D01* +X86585915Y-46545838D01* +X86733586Y-46353389D01* +X86785315Y-46263791D01* +X94133850Y-46263791D01* +X94133850Y-46382409D01* +X94148395Y-46436692D01* +X94164552Y-46496990D01* +X94223857Y-46599708D01* +X94223859Y-46599710D01* +X94223861Y-46599713D01* +X94307737Y-46683589D01* +X94307739Y-46683590D01* +X94307741Y-46683592D01* +X94410460Y-46742897D01* +X94410461Y-46742897D01* +X94410464Y-46742899D01* +X94525041Y-46773600D01* +X94525043Y-46773600D01* +X94643657Y-46773600D01* +X94643659Y-46773600D01* +X94758236Y-46742899D01* +X94758238Y-46742897D01* +X94758240Y-46742897D01* +X94860958Y-46683592D01* +X94860958Y-46683591D01* +X94860963Y-46683589D01* +X94944839Y-46599713D01* +X94946464Y-46596899D01* +X95004147Y-46496990D01* +X95004147Y-46496988D01* +X95004149Y-46496986D01* +X95034850Y-46382409D01* +X95034850Y-46263791D01* +X95004149Y-46149214D01* +X95004147Y-46149211D01* +X95004147Y-46149209D01* +X94944842Y-46046491D01* +X94944840Y-46046489D01* +X94944839Y-46046487D01* +X94860963Y-45962611D01* +X94860960Y-45962609D01* +X94860958Y-45962607D01* +X94758239Y-45903302D01* +X94758240Y-45903302D01* +X94721046Y-45893336D01* +X94643659Y-45872600D01* +X94525041Y-45872600D01* +X94454917Y-45891389D01* +X94410459Y-45903302D01* +X94307741Y-45962607D01* +X94223857Y-46046491D01* +X94164552Y-46149209D01* +X94164551Y-46149214D01* +X94133850Y-46263791D01* +X86785315Y-46263791D01* +X86854874Y-46143312D01* +X86854878Y-46143304D01* +X86897780Y-46039728D01* +X86947704Y-45919200D01* +X87010488Y-45684889D01* +X87026063Y-45566582D01* +X87026064Y-45566578D01* +X97191150Y-45566578D01* +X97191150Y-47079621D01* +X97191151Y-47079623D01* +X97206002Y-47173399D01* +X97206004Y-47173404D01* +X97263600Y-47286442D01* +X97353308Y-47376150D01* +X97466346Y-47433746D01* +X97560131Y-47448600D01* +X98823168Y-47448599D01* +X98823171Y-47448599D01* +X98823172Y-47448598D01* +X98870061Y-47441172D01* +X98916949Y-47433747D01* +X98916949Y-47433746D01* +X98916954Y-47433746D01* +X99029992Y-47376150D01* +X99119700Y-47286442D01* +X99177296Y-47173404D01* +X99192150Y-47079619D01* +X99192149Y-46826862D01* +X99211056Y-46768675D01* +X99260556Y-46732711D01* +X99321741Y-46732710D01* +X99371241Y-46768674D01* +X99385304Y-46796272D01* +X99440554Y-46966315D01* +X99537025Y-47155652D01* +X99661927Y-47327564D01* +X99812185Y-47477822D01* +X99984097Y-47602724D01* +X100173434Y-47699195D01* +X100375527Y-47764858D01* +X100441649Y-47775331D01* +X100441650Y-47775330D01* +X100441650Y-46727245D01* +X100508307Y-46765730D01* +X100629115Y-46798100D01* +X100754185Y-46798100D01* +X100874993Y-46765730D01* +X100941650Y-46727245D01* +X100941650Y-47775331D01* +X101007772Y-47764858D01* +X101209865Y-47699195D01* +X101399202Y-47602724D01* +X101571114Y-47477822D01* +X101721372Y-47327564D01* +X101846274Y-47155652D01* +X101942745Y-46966315D01* +X102008409Y-46764221D01* +X102021876Y-46679193D01* +X102049653Y-46624677D01* +X102104170Y-46596899D01* +X102164602Y-46606470D01* +X102207866Y-46649735D01* +X102216755Y-46675365D01* +X102229599Y-46739936D01* +X102305017Y-46922013D01* +X102305018Y-46922014D01* +X102414511Y-47085882D01* +X102553868Y-47225239D01* +X102717736Y-47334732D01* +X102899815Y-47410151D01* +X103093109Y-47448600D01* +X103093110Y-47448600D01* +X103290190Y-47448600D01* +X103290191Y-47448600D01* +X103483485Y-47410151D01* +X103665564Y-47334732D01* +X103829432Y-47225239D01* +X103968789Y-47085882D01* +X104078282Y-46922014D01* +X104153701Y-46739935D01* +X104192150Y-46546641D01* +X104192150Y-46099559D01* +X104192149Y-46099556D01* +X104691150Y-46099556D01* +X104691150Y-46546643D01* +X104714214Y-46662589D01* +X104726011Y-46721899D01* +X104729599Y-46739934D01* +X104729599Y-46739936D01* +X104805017Y-46922013D01* +X104805018Y-46922014D01* +X104914511Y-47085882D01* +X105053868Y-47225239D01* +X105217736Y-47334732D01* +X105399815Y-47410151D01* +X105593109Y-47448600D01* +X105593110Y-47448600D01* +X105790190Y-47448600D01* +X105790191Y-47448600D01* +X105983485Y-47410151D01* +X106165564Y-47334732D01* +X106329432Y-47225239D01* +X106468789Y-47085882D01* +X106578282Y-46922014D01* +X106653701Y-46739935D01* +X106692150Y-46546641D01* +X106692150Y-46099559D01* +X106653701Y-45906265D01* +X106578282Y-45724186D01* +X106468789Y-45560318D01* +X106366743Y-45458272D01* +X110191150Y-45458272D01* +X110191150Y-47187927D01* +X110199882Y-47231820D01* +X110199883Y-47231822D01* +X110233146Y-47281604D01* +X110282928Y-47314867D01* +X110293977Y-47317064D01* +X110326822Y-47323599D01* +X110326828Y-47323599D01* +X110326830Y-47323600D01* +X110326831Y-47323600D01* +X112056469Y-47323600D01* +X112056470Y-47323600D01* +X112056471Y-47323599D01* +X112056477Y-47323599D01* +X112078273Y-47319262D01* +X112100372Y-47314867D01* +X112150154Y-47281604D01* +X112183417Y-47231822D01* +X112192150Y-47187920D01* +X112192150Y-45566578D01* +X115191150Y-45566578D01* +X115191150Y-47079621D01* +X115191151Y-47079623D01* +X115206002Y-47173399D01* +X115206004Y-47173404D01* +X115263600Y-47286442D01* +X115353308Y-47376150D01* +X115466346Y-47433746D01* +X115560131Y-47448600D01* +X116823168Y-47448599D01* +X116823171Y-47448599D01* +X116823172Y-47448598D01* +X116870061Y-47441172D01* +X116916949Y-47433747D01* +X116916949Y-47433746D01* +X116916954Y-47433746D01* +X117029992Y-47376150D01* +X117119700Y-47286442D01* +X117177296Y-47173404D01* +X117192150Y-47079619D01* +X117192149Y-46099556D01* +X117691150Y-46099556D01* +X117691150Y-46546643D01* +X117714214Y-46662589D01* +X117726011Y-46721899D01* +X117729599Y-46739934D01* +X117729599Y-46739936D01* +X117805017Y-46922013D01* +X117805018Y-46922014D01* +X117914511Y-47085882D01* +X118053868Y-47225239D01* +X118217736Y-47334732D01* +X118399815Y-47410151D01* +X118593109Y-47448600D01* +X118593110Y-47448600D01* +X118790190Y-47448600D01* +X118790191Y-47448600D01* +X118983485Y-47410151D01* +X119165564Y-47334732D01* +X119329432Y-47225239D01* +X119468789Y-47085882D01* +X119578282Y-46922014D01* +X119653701Y-46739935D01* +X119666544Y-46675365D01* +X119696440Y-46621982D01* +X119752005Y-46596366D01* +X119812015Y-46608303D01* +X119853548Y-46653232D01* +X119861423Y-46679192D01* +X119874891Y-46764222D01* +X119940554Y-46966315D01* +X120037025Y-47155652D01* +X120161927Y-47327564D01* +X120312185Y-47477822D01* +X120484097Y-47602724D01* +X120673434Y-47699195D01* +X120875527Y-47764858D01* +X120941649Y-47775331D01* +X120941650Y-47775330D01* +X120941650Y-46727245D01* +X121008307Y-46765730D01* +X121129115Y-46798100D01* +X121254185Y-46798100D01* +X121374993Y-46765730D01* +X121441650Y-46727245D01* +X121441650Y-47775331D01* +X121507772Y-47764858D01* +X121709865Y-47699195D01* +X121899202Y-47602724D01* +X122071114Y-47477822D01* +X122221372Y-47327564D01* +X122346274Y-47155652D01* +X122442745Y-46966315D01* +X122508409Y-46764221D01* +X122538680Y-46573100D01* +X121595796Y-46573100D01* +X121634280Y-46506443D01* +X121666650Y-46385635D01* +X121666650Y-46260565D01* +X121634280Y-46139757D01* +X121595796Y-46073100D01* +X122538680Y-46073100D01* +X122538680Y-46073099D01* +X122508409Y-45881978D01* +X122442745Y-45679884D01* +X122393195Y-45582636D01* +X122372275Y-45541578D01* +X126191150Y-45541578D01* +X126191150Y-47104621D01* +X126191151Y-47104623D01* +X126206002Y-47198399D01* +X126206004Y-47198404D01* +X126263600Y-47311442D01* +X126353308Y-47401150D01* +X126466346Y-47458746D01* +X126560131Y-47473600D01* +X127823168Y-47473599D01* +X127823171Y-47473599D01* +X127823172Y-47473598D01* +X127870061Y-47466172D01* +X127916949Y-47458747D01* +X127916949Y-47458746D01* +X127916954Y-47458746D01* +X128029992Y-47401150D01* +X128119700Y-47311442D01* +X128177296Y-47198404D01* +X128192150Y-47104619D01* +X128192149Y-46851863D01* +X128211056Y-46793676D01* +X128260556Y-46757712D01* +X128321741Y-46757711D01* +X128371241Y-46793675D01* +X128385304Y-46821273D01* +X128440554Y-46991315D01* +X128537025Y-47180652D01* +X128661927Y-47352564D01* +X128812185Y-47502822D01* +X128984097Y-47627724D01* +X129173434Y-47724195D01* +X129375527Y-47789858D01* +X129441649Y-47800331D01* +X129441650Y-47800330D01* +X129441650Y-46756112D01* +X129498657Y-46789025D01* +X129625824Y-46823100D01* +X129757476Y-46823100D01* +X129884643Y-46789025D01* +X129941650Y-46756112D01* +X129941650Y-47800331D01* +X130007772Y-47789858D01* +X130209865Y-47724195D01* +X130399202Y-47627724D01* +X130571114Y-47502822D01* +X130721372Y-47352564D01* +X130846274Y-47180652D01* +X130942745Y-46991315D01* +X131008409Y-46789221D01* +X131041650Y-46579350D01* +X131041650Y-46573101D01* +X131041649Y-46573100D01* +X130124662Y-46573100D01* +X130157575Y-46516093D01* +X130191650Y-46388926D01* +X130191650Y-46257274D01* +X130157575Y-46130107D01* +X130124662Y-46073100D01* +X131041649Y-46073100D01* +X131041650Y-46073099D01* +X131041650Y-46066849D01* +X131008409Y-45856978D01* +X130942745Y-45654884D01* +X130905933Y-45582636D01* +X130885013Y-45541578D01* +X134791150Y-45541578D01* +X134791150Y-47104621D01* +X134791151Y-47104623D01* +X134806002Y-47198399D01* +X134806004Y-47198404D01* +X134863600Y-47311442D01* +X134953308Y-47401150D01* +X135066346Y-47458746D01* +X135160131Y-47473600D01* +X136423168Y-47473599D01* +X136423171Y-47473599D01* +X136423172Y-47473598D01* +X136470061Y-47466172D01* +X136516949Y-47458747D01* +X136516949Y-47458746D01* +X136516954Y-47458746D01* +X136629992Y-47401150D01* +X136719700Y-47311442D01* +X136777296Y-47198404D01* +X136792150Y-47104619D01* +X136792149Y-46074556D01* +X137291150Y-46074556D01* +X137291150Y-46571643D01* +X137309241Y-46662589D01* +X137327145Y-46752600D01* +X137329599Y-46764934D01* +X137329599Y-46764936D01* +X137405017Y-46947013D01* +X137431284Y-46986324D01* +X137514511Y-47110882D01* +X137653868Y-47250239D01* +X137817736Y-47359732D01* +X137999815Y-47435151D01* +X138193109Y-47473600D01* +X138193110Y-47473600D01* +X138390190Y-47473600D01* +X138390191Y-47473600D01* +X138583485Y-47435151D01* +X138765564Y-47359732D01* +X138929432Y-47250239D01* +X139068789Y-47110882D01* +X139178282Y-46947014D01* +X139253701Y-46764935D01* +X139292150Y-46571641D01* +X139292150Y-46074559D01* +X139280679Y-46016891D01* +X167944250Y-46016891D01* +X167944250Y-46135509D01* +X167971324Y-46236551D01* +X167974952Y-46250090D01* +X168034257Y-46352808D01* +X168034259Y-46352810D01* +X168034261Y-46352813D01* +X168118137Y-46436689D01* +X168118139Y-46436690D01* +X168118141Y-46436692D01* +X168220860Y-46495997D01* +X168220861Y-46495997D01* +X168220864Y-46495999D01* +X168335441Y-46526700D01* +X168335443Y-46526700D01* +X168454057Y-46526700D01* +X168454059Y-46526700D01* +X168568636Y-46495999D01* +X168568638Y-46495997D01* +X168568640Y-46495997D01* +X168671358Y-46436692D01* +X168671358Y-46436691D01* +X168671363Y-46436689D01* +X168755239Y-46352813D01* +X168814549Y-46250086D01* +X168816504Y-46242791D01* +X177094750Y-46242791D01* +X177094750Y-46361409D01* +X177114921Y-46436689D01* +X177125452Y-46475990D01* +X177184757Y-46578708D01* +X177184759Y-46578710D01* +X177184761Y-46578713D01* +X177268637Y-46662589D01* +X177268639Y-46662590D01* +X177268641Y-46662592D01* +X177371360Y-46721897D01* +X177371361Y-46721897D01* +X177371364Y-46721899D01* +X177485941Y-46752600D01* +X177485943Y-46752600D01* +X177604557Y-46752600D01* +X177604559Y-46752600D01* +X177719136Y-46721899D01* +X177719138Y-46721897D01* +X177719140Y-46721897D01* +X177821858Y-46662592D01* +X177821858Y-46662591D01* +X177821863Y-46662589D01* +X177905739Y-46578713D01* +X177941893Y-46516093D01* +X177965047Y-46475990D01* +X177965047Y-46475988D01* +X177965049Y-46475986D01* +X177995750Y-46361409D01* +X177995750Y-46242791D01* +X177965049Y-46128214D01* +X177965047Y-46128211D01* +X177965047Y-46128209D01* +X177905742Y-46025491D01* +X177905740Y-46025489D01* +X177905739Y-46025487D01* +X177821863Y-45941611D01* +X177821860Y-45941609D01* +X177821858Y-45941607D01* +X177719139Y-45882302D01* +X177719140Y-45882302D01* +X177689757Y-45874429D01* +X177604559Y-45851600D01* +X177485941Y-45851600D01* +X177415817Y-45870389D01* +X177371359Y-45882302D01* +X177268641Y-45941607D01* +X177184757Y-46025491D01* +X177125452Y-46128209D01* +X177121405Y-46143312D01* +X177094750Y-46242791D01* +X168816504Y-46242791D01* +X168845250Y-46135509D01* +X168845250Y-46016891D01* +X168814549Y-45902314D01* +X168814547Y-45902311D01* +X168814547Y-45902309D01* +X168755242Y-45799591D01* +X168755240Y-45799589D01* +X168755239Y-45799587D01* +X168671363Y-45715711D01* +X168671360Y-45715709D01* +X168671358Y-45715707D01* +X168568639Y-45656402D01* +X168568640Y-45656402D01* +X168555101Y-45652774D01* +X168454059Y-45625700D01* +X168335441Y-45625700D01* +X168265317Y-45644489D01* +X168220859Y-45656402D01* +X168118141Y-45715707D01* +X168034257Y-45799591D01* +X167974952Y-45902309D01* +X167970426Y-45919200D01* +X167944250Y-46016891D01* +X139280679Y-46016891D01* +X139253701Y-45881265D01* +X139178282Y-45699186D01* +X139068789Y-45535318D01* +X138929432Y-45395961D01* +X138802978Y-45311467D01* +X138765563Y-45286467D01* +X138583485Y-45211049D01* +X138537038Y-45201810D01* +X209341150Y-45201810D01* +X209341150Y-45444389D01* +X209372811Y-45684881D01* +X209372811Y-45684886D01* +X209403547Y-45799591D01* +X209435364Y-45918336D01* +X209435594Y-45919192D01* +X209435598Y-45919205D01* +X209528422Y-46143304D01* +X209528424Y-46143308D01* +X209528426Y-46143312D01* +X209649714Y-46353389D01* +X209649716Y-46353392D01* +X209797379Y-46545831D01* +X209797381Y-46545833D01* +X209797385Y-46545838D01* +X209968912Y-46717365D01* +X209968916Y-46717368D01* +X209968918Y-46717370D01* +X210071746Y-46796272D01* +X210161361Y-46865036D01* +X210371438Y-46986324D01* +X210595550Y-47079154D01* +X210829861Y-47141938D01* +X211070362Y-47173600D01* +X211070363Y-47173600D01* +X211312937Y-47173600D01* +X211312938Y-47173600D01* +X211553439Y-47141938D01* +X211787750Y-47079154D01* +X212011862Y-46986324D01* +X212221939Y-46865036D01* +X212414388Y-46717365D01* +X212585915Y-46545838D01* +X212733586Y-46353389D01* +X212854874Y-46143312D01* +X212947704Y-45919200D01* +X213010488Y-45684889D01* +X213042150Y-45444388D01* +X213042150Y-45201812D01* +X213010488Y-44961311D01* +X212947704Y-44727000D01* +X212854874Y-44502888D01* +X212733586Y-44292811D01* +X212585915Y-44100362D01* +X212414388Y-43928835D01* +X212414383Y-43928831D01* +X212414381Y-43928829D01* +X212221942Y-43781166D01* +X212221939Y-43781164D01* +X212011862Y-43659876D01* +X212011858Y-43659874D01* +X212011854Y-43659872D01* +X211787755Y-43567048D01* +X211787754Y-43567047D01* +X211787750Y-43567046D01* +X211553439Y-43504262D01* +X211553436Y-43504261D01* +X211553434Y-43504261D01* +X211312939Y-43472600D01* +X211312938Y-43472600D01* +X211070362Y-43472600D01* +X211070360Y-43472600D01* +X210829868Y-43504261D01* +X210829863Y-43504261D01* +X210595557Y-43567044D01* +X210595544Y-43567048D01* +X210371445Y-43659872D01* +X210161357Y-43781166D01* +X209968918Y-43928829D01* +X209797379Y-44100368D01* +X209649716Y-44292807D01* +X209528422Y-44502895D01* +X209435598Y-44726994D01* +X209435594Y-44727007D01* +X209372811Y-44961313D01* +X209372811Y-44961318D01* +X209341150Y-45201810D01* +X138537038Y-45201810D01* +X138390193Y-45172600D01* +X138390191Y-45172600D01* +X138193109Y-45172600D01* +X138193106Y-45172600D01* +X137999815Y-45211049D01* +X137999813Y-45211049D01* +X137817736Y-45286467D01* +X137653868Y-45395961D01* +X137653864Y-45395964D01* +X137514514Y-45535314D01* +X137514511Y-45535318D01* +X137405017Y-45699186D01* +X137329599Y-45881263D01* +X137329599Y-45881265D01* +X137291150Y-46074556D01* +X136792149Y-46074556D01* +X136792149Y-45541582D01* +X136792149Y-45541581D01* +X136792149Y-45541578D01* +X136792148Y-45541576D01* +X136777297Y-45447800D01* +X136777296Y-45447798D01* +X136777296Y-45447796D01* +X136719700Y-45334758D01* +X136629992Y-45245050D01* +X136516954Y-45187454D01* +X136516955Y-45187454D01* +X136423171Y-45172600D01* +X135160128Y-45172600D01* +X135160126Y-45172601D01* +X135066350Y-45187452D01* +X135066345Y-45187454D01* +X134953309Y-45245049D01* +X134863599Y-45334759D01* +X134806004Y-45447795D01* +X134791150Y-45541578D01* +X130885013Y-45541578D01* +X130846274Y-45465547D01* +X130721372Y-45293635D01* +X130571114Y-45143377D01* +X130399202Y-45018475D01* +X130209865Y-44922004D01* +X130007770Y-44856340D01* +X129941650Y-44845867D01* +X129941650Y-45890088D01* +X129884643Y-45857175D01* +X129757476Y-45823100D01* +X129625824Y-45823100D01* +X129498657Y-45857175D01* +X129441650Y-45890088D01* +X129441650Y-44845868D01* +X129441649Y-44845867D01* +X129375530Y-44856340D01* +X129375528Y-44856340D01* +X129173434Y-44922004D01* +X128984097Y-45018475D01* +X128812185Y-45143377D01* +X128661927Y-45293635D01* +X128537025Y-45465547D01* +X128440554Y-45654884D01* +X128385304Y-45824929D01* +X128349340Y-45874429D01* +X128291149Y-45893336D01* +X128232958Y-45874429D01* +X128196994Y-45824929D01* +X128192149Y-45794336D01* +X128192149Y-45541578D01* +X128192148Y-45541576D01* +X128177297Y-45447800D01* +X128177296Y-45447798D01* +X128177296Y-45447796D01* +X128119700Y-45334758D01* +X128029992Y-45245050D01* +X127916954Y-45187454D01* +X127916955Y-45187454D01* +X127823171Y-45172600D01* +X126560128Y-45172600D01* +X126560126Y-45172601D01* +X126466350Y-45187452D01* +X126466345Y-45187454D01* +X126353309Y-45245049D01* +X126263599Y-45334759D01* +X126206004Y-45447795D01* +X126191150Y-45541578D01* +X122372275Y-45541578D01* +X122346274Y-45490547D01* +X122221372Y-45318635D01* +X122071114Y-45168377D01* +X121899202Y-45043475D01* +X121709865Y-44947004D01* +X121507770Y-44881340D01* +X121441650Y-44870867D01* +X121441650Y-45918954D01* +X121374993Y-45880470D01* +X121254185Y-45848100D01* +X121129115Y-45848100D01* +X121008307Y-45880470D01* +X120941650Y-45918954D01* +X120941650Y-44870868D01* +X120941649Y-44870867D01* +X120875530Y-44881340D01* +X120875528Y-44881340D01* +X120673434Y-44947004D01* +X120484097Y-45043475D01* +X120312185Y-45168377D01* +X120161927Y-45318635D01* +X120037025Y-45490547D01* +X119940554Y-45679884D01* +X119874891Y-45881977D01* +X119861423Y-45967007D01* +X119833645Y-46021523D01* +X119779128Y-46049300D01* +X119718696Y-46039728D01* +X119675432Y-45996463D01* +X119666545Y-45970836D01* +X119653701Y-45906265D01* +X119578282Y-45724186D01* +X119468789Y-45560318D01* +X119329432Y-45420961D01* +X119219938Y-45347799D01* +X119165563Y-45311467D01* +X118983485Y-45236049D01* +X118790193Y-45197600D01* +X118790191Y-45197600D01* +X118593109Y-45197600D01* +X118593106Y-45197600D01* +X118399815Y-45236049D01* +X118399813Y-45236049D01* +X118217736Y-45311467D01* +X118053868Y-45420961D01* +X118053864Y-45420964D01* +X117914514Y-45560314D01* +X117914511Y-45560318D01* +X117805017Y-45724186D01* +X117729599Y-45906263D01* +X117729599Y-45906265D01* +X117691150Y-46099556D01* +X117192149Y-46099556D01* +X117192149Y-45566582D01* +X117192149Y-45566581D01* +X117192149Y-45566578D01* +X117192148Y-45566576D01* +X117177297Y-45472800D01* +X117177296Y-45472798D01* +X117177296Y-45472796D01* +X117119700Y-45359758D01* +X117029992Y-45270050D01* +X116916954Y-45212454D01* +X116916955Y-45212454D01* +X116823171Y-45197600D01* +X115560128Y-45197600D01* +X115560126Y-45197601D01* +X115466350Y-45212452D01* +X115466345Y-45212454D01* +X115353309Y-45270049D01* +X115263599Y-45359759D01* +X115206004Y-45472795D01* +X115191150Y-45566578D01* +X112192150Y-45566578D01* +X112192150Y-45458280D01* +X112192149Y-45458278D01* +X112192149Y-45458272D01* +X112183417Y-45414379D01* +X112183415Y-45414375D01* +X112150155Y-45364598D01* +X112150154Y-45364596D01* +X112142913Y-45359758D01* +X112100374Y-45331334D01* +X112100370Y-45331332D01* +X112056477Y-45322600D01* +X112056470Y-45322600D01* +X110326830Y-45322600D01* +X110326822Y-45322600D01* +X110282929Y-45331332D01* +X110282925Y-45331334D01* +X110233148Y-45364594D01* +X110233144Y-45364598D01* +X110199884Y-45414375D01* +X110199882Y-45414379D01* +X110191150Y-45458272D01* +X106366743Y-45458272D01* +X106329432Y-45420961D01* +X106219938Y-45347799D01* +X106165563Y-45311467D01* +X105983485Y-45236049D01* +X105790193Y-45197600D01* +X105790191Y-45197600D01* +X105593109Y-45197600D01* +X105593106Y-45197600D01* +X105399815Y-45236049D01* +X105399813Y-45236049D01* +X105217736Y-45311467D01* +X105053868Y-45420961D01* +X105053864Y-45420964D01* +X104914514Y-45560314D01* +X104914511Y-45560318D01* +X104805017Y-45724186D01* +X104729599Y-45906263D01* +X104729599Y-45906265D01* +X104691150Y-46099556D01* +X104192149Y-46099556D01* +X104153701Y-45906265D01* +X104078282Y-45724186D01* +X103968789Y-45560318D01* +X103829432Y-45420961D01* +X103719938Y-45347799D01* +X103665563Y-45311467D01* +X103483485Y-45236049D01* +X103290193Y-45197600D01* +X103290191Y-45197600D01* +X103093109Y-45197600D01* +X103093106Y-45197600D01* +X102899815Y-45236049D01* +X102899813Y-45236049D01* +X102717736Y-45311467D01* +X102553868Y-45420961D01* +X102553864Y-45420964D01* +X102414514Y-45560314D01* +X102414511Y-45560318D01* +X102305017Y-45724186D01* +X102229599Y-45906263D01* +X102216755Y-45970834D01* +X102186857Y-46024218D01* +X102131292Y-46049833D01* +X102071283Y-46037896D01* +X102029750Y-45992965D01* +X102021876Y-45967006D01* +X102008409Y-45881978D01* +X101942745Y-45679884D01* +X101846274Y-45490547D01* +X101721372Y-45318635D01* +X101571114Y-45168377D01* +X101399202Y-45043475D01* +X101209865Y-44947004D01* +X101007770Y-44881340D01* +X100941650Y-44870867D01* +X100941650Y-45918954D01* +X100874993Y-45880470D01* +X100754185Y-45848100D01* +X100629115Y-45848100D01* +X100508307Y-45880470D01* +X100441650Y-45918954D01* +X100441650Y-44870868D01* +X100441649Y-44870867D01* +X100375530Y-44881340D01* +X100375528Y-44881340D01* +X100173434Y-44947004D01* +X99984097Y-45043475D01* +X99812185Y-45168377D01* +X99661927Y-45318635D01* +X99537025Y-45490547D01* +X99440554Y-45679884D01* +X99385304Y-45849929D01* +X99349340Y-45899429D01* +X99291149Y-45918336D01* +X99232958Y-45899429D01* +X99196994Y-45849929D01* +X99192149Y-45819336D01* +X99192149Y-45566578D01* +X99192148Y-45566576D01* +X99177297Y-45472800D01* +X99177296Y-45472798D01* +X99177296Y-45472796D01* +X99119700Y-45359758D01* +X99029992Y-45270050D01* +X98916954Y-45212454D01* +X98916955Y-45212454D01* +X98823171Y-45197600D01* +X97560128Y-45197600D01* +X97560126Y-45197601D01* +X97466350Y-45212452D01* +X97466345Y-45212454D01* +X97353309Y-45270049D01* +X97263599Y-45359759D01* +X97206004Y-45472795D01* +X97191150Y-45566578D01* +X87026064Y-45566578D01* +X87028277Y-45549769D01* +X87028277Y-45549768D01* +X87036073Y-45490547D01* +X87042150Y-45444388D01* +X87042150Y-45201812D01* +X87010488Y-44961311D01* +X86947704Y-44727000D01* +X86854874Y-44502888D01* +X86733586Y-44292811D01* +X86585915Y-44100362D01* +X86414388Y-43928835D01* +X86414383Y-43928831D01* +X86414381Y-43928829D01* +X86221942Y-43781166D01* +X86221939Y-43781164D01* +X86011862Y-43659876D01* +X86011858Y-43659874D01* +X86011854Y-43659872D01* +X85787755Y-43567048D01* +X85787754Y-43567047D01* +X85787750Y-43567046D01* +X85553439Y-43504262D01* +X85553436Y-43504261D01* +X85553434Y-43504261D01* +X85312939Y-43472600D01* +X85312938Y-43472600D01* +X85070362Y-43472600D01* +X85070360Y-43472600D01* +X84829868Y-43504261D01* +X84829863Y-43504261D01* +X84595557Y-43567044D01* +X84595544Y-43567048D01* +X84371445Y-43659872D01* +X84161357Y-43781166D01* +X83968918Y-43928829D01* +X83797379Y-44100368D01* +X83649716Y-44292807D01* +X83528422Y-44502895D01* +X83435598Y-44726994D01* +X83435594Y-44727007D01* +X83372811Y-44961313D01* +X83372811Y-44961318D01* +X83341150Y-45201810D01* +X80766348Y-45201810D01* +X80762023Y-40922698D01* +X80780872Y-40864490D01* +X80830335Y-40828476D01* +X80861023Y-40823600D01* +X214592150Y-40823600D01* +X214650341Y-40842507D01* +G37* +%TD.AperFunction*% +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-In2_Cu.g2 b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-In2_Cu.g2 new file mode 100644 index 0000000..463cf7b --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-In2_Cu.g2 @@ -0,0 +1,1562 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:40:29-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L3,Inr*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:40:29* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%TA.AperFunction,ComponentPad*% +%ADD10RoundRect,0.250000X-0.600000X-0.725000X0.600000X-0.725000X0.600000X0.725000X-0.600000X0.725000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD11O,1.700000X1.950000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD12RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD13O,1.950000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD14RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD15RoundRect,0.250000X-0.750000X0.600000X-0.750000X-0.600000X0.750000X-0.600000X0.750000X0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD16O,2.000000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD17R,1.700000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD18C,1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD19RoundRect,0.250000X-0.600000X-0.750000X0.600000X-0.750000X0.600000X0.750000X-0.600000X0.750000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD20O,1.700000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD21R,1.350000X1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD22C,1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD23RoundRect,0.250000X0.750000X-0.600000X0.750000X0.600000X-0.750000X0.600000X-0.750000X-0.600000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD24C,0.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD25O,0.900000X2.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD26O,0.900000X1.700000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD27RoundRect,0.250000X-1.050000X1.050000X-1.050000X-1.050000X1.050000X-1.050000X1.050000X1.050000X0*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD28C,2.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD29R,2.000000X2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD30C,2.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD31R,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD32O,1.600000X1.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD33C,0.600000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD34C,0.800000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD35C,0.200000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD36C,1.500000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD37C,1.000000*% +%TD*% +G04 APERTURE END LIST* +D10* +%TO.N,USART1_RX*% +%TO.C,P13*% +X116191650Y-46323100D03* +D11* +%TO.N,/DIN_4G*% +X118691650Y-46323100D03* +%TO.N,GND*% +X121191650Y-46323100D03* +%TD*% +D12* +%TO.N,/5V_FAN*% +%TO.C,P6*% +X210191650Y-61823100D03* +D13* +%TO.N,/FAN_RET*% +X210191650Y-59323100D03* +%TO.N,GND*% +X210191650Y-56823100D03* +%TO.N,FAN_TACH_RAW*% +X210191650Y-54323100D03* +%TD*% +D14* +%TO.N,/BAT_PLUS*% +%TO.C,P4*% +X210191650Y-108323100D03* +D13* +%TO.N,GND*% +X210191650Y-105823100D03* +%TO.N,/NTC*% +X210191650Y-103323100D03* +%TD*% +D15* +%TO.N,/NRST*% +%TO.C,P10*% +X210166650Y-80073100D03* +D16* +%TO.N,GND*% +X210166650Y-77573100D03* +%TD*% +D17* +%TO.N,unconnected-(J1-Pin_1-Pad1)*% +%TO.C,J1*% +X107191650Y-56323100D03* +D18* +%TO.N,unconnected-(J1-Pin_2-Pad2)*% +X109731650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_3-Pad3)*% +X112271650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_4-Pad4)*% +X114811650Y-56323100D03* +%TO.N,/NRST*% +X117351650Y-56323100D03* +%TO.N,/BAT_SENSE*% +X119891650Y-56323100D03* +%TO.N,/PWR_CTRL*% +X122431650Y-56323100D03* +%TO.N,/GNSS_TX*% +X124971650Y-56323100D03* +%TO.N,/GNSS_RX*% +X127511650Y-56323100D03* +%TO.N,/5V_SENSE*% +X130051650Y-56323100D03* +%TO.N,IGN_SENSE*% +X132591650Y-56323100D03* +%TO.N,FAN_PWM*% +X135131650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_13-Pad13)*% +X137671650Y-56323100D03* +%TO.N,EXT_LED*% +X140211650Y-56323100D03* +%TO.N,/NTC_TEMP*% +X142751650Y-56323100D03* +%TO.N,unconnected-(J1-Pin_16-Pad16)*% +X145291650Y-56323100D03* +%TO.N,FAN_TACH*% +X147831650Y-56323100D03* +%TO.N,3V3*% +X150371650Y-56323100D03* +%TO.N,GND*% +X152911650Y-56323100D03* +%TO.N,/SYS5V*% +X155451650Y-56323100D03* +%TD*% +D19* +%TO.N,/MAIN5V*% +%TO.C,P11*% +X135791650Y-46323100D03* +D20* +%TO.N,/SYS5V*% +X138291650Y-46323100D03* +%TD*% +D21* +%TO.N,/3V3_MODEM*% +%TO.C,J7*% +X174191650Y-74823100D03* +D22* +%TO.N,/DOUT_4G*% +X174191650Y-76823100D03* +%TO.N,/DIN_4G*% +X174191650Y-78823100D03* +%TO.N,GND*% +X174191650Y-80823100D03* +%TO.N,/MODEM_RST*% +X174191650Y-82823100D03* +%TO.N,/USB_VBUS*% +X174191650Y-84823100D03* +%TO.N,/USB_DP*% +X174191650Y-86823100D03* +%TO.N,/USB_DM*% +X174191650Y-88823100D03* +%TO.N,unconnected-(J7-Pin_9-Pad9)*% +X174191650Y-90823100D03* +%TO.N,GND*% +X174191650Y-92823100D03* +%TD*% +D19* +%TO.N,/VEH5V*% +%TO.C,P2*% +X127191650Y-46323100D03* +D20* +%TO.N,GND*% +X129691650Y-46323100D03* +%TD*% +D17* +%TO.N,/USART1_TX*% +%TO.C,H3*% +X111191650Y-46323100D03* +D18* +%TO.N,USART1_RX*% +X111191650Y-48863100D03* +%TO.N,GND*% +X111191650Y-51403100D03* +%TD*% +D21* +%TO.N,GND*% +%TO.C,J8*% +X196541650Y-74823100D03* +D22* +%TO.N,unconnected-(J8-Pin_2-Pad2)*% +X196541650Y-76823100D03* +%TO.N,unconnected-(J8-Pin_3-Pad3)*% +X196541650Y-78823100D03* +%TO.N,unconnected-(J8-Pin_4-Pad4)*% +X196541650Y-80823100D03* +%TO.N,unconnected-(J8-Pin_5-Pad5)*% +X196541650Y-82823100D03* +%TO.N,GND*% +X196541650Y-84823100D03* +%TO.N,/3V3_MODEM*% +X196541650Y-86823100D03* +%TO.N,/MODEM_LED*% +X196541650Y-88823100D03* +%TO.N,unconnected-(J8-Pin_9-Pad9)*% +X196541650Y-90823100D03* +%TO.N,GND*% +X196541650Y-92823100D03* +%TD*% +D10* +%TO.N,3V3*% +%TO.C,P5*% +X98191650Y-46323100D03* +D11* +%TO.N,GND*% +X100691650Y-46323100D03* +%TO.N,/I2C_SDA*% +X103191650Y-46323100D03* +%TO.N,/I2C_SCL*% +X105691650Y-46323100D03* +%TD*% +D15* +%TO.N,/LED_A*% +%TO.C,P8*% +X210166650Y-70823100D03* +D16* +%TO.N,/LED_K*% +X210166650Y-68323100D03* +%TD*% +D23* +%TO.N,/NTC_TEMP*% +%TO.C,P12*% +X210191650Y-121323100D03* +D16* +%TO.N,GND*% +X210191650Y-118823100D03* +%TD*% +D24* +%TO.N,GND*% +%TO.C,J9*% +X161175000Y-129425000D03* +%TO.N,/USB_VBUS*% +X162025000Y-129425000D03* +%TO.N,/USB_CC1*% +X162875000Y-129425000D03* +%TO.N,/USB_DP*% +X163725000Y-129425000D03* +%TO.N,/USB_DM*% +X164575000Y-129425000D03* +%TO.N,N/C*% +X165425000Y-129425000D03* +%TO.N,/USB_VBUS*% +X166275000Y-129425000D03* +%TO.N,GND*% +X167125000Y-129425000D03* +X167125000Y-130775000D03* +%TO.N,/USB_VBUS*% +X166275000Y-130775000D03* +%TO.N,/USB_CC2*% +X165425000Y-130775000D03* +%TO.N,/USB_DP*% +X164575000Y-130775000D03* +%TO.N,/USB_DM*% +X163725000Y-130775000D03* +%TO.N,N/C*% +X162875000Y-130775000D03* +%TO.N,/USB_VBUS*% +X162025000Y-130775000D03* +%TO.N,GND*% +X161175000Y-130775000D03* +D25* +X159825000Y-130405000D03* +D26* +X159825000Y-133785000D03* +D25* +X168475000Y-130405000D03* +D26* +X168475000Y-133785000D03* +%TD*% +D27* +%TO.N,/24V_IN*% +%TO.C,P1*% +X172691650Y-133823100D03* +D28* +%TO.N,GND*% +X177691650Y-133823100D03* +%TO.N,IGN_IN*% +X182691650Y-133823100D03* +%TO.N,unconnected-(P1-Pin_4-Pad4)*% +X187691650Y-133823100D03* +%TO.N,unconnected-(P1-Pin_5-Pad5)*% +X192691650Y-133823100D03* +%TD*% +D29* +%TO.N,USART1_RX*% +%TO.C,K1*% +X189284150Y-55865600D03* +D30* +%TO.N,/SYS5V*% +X189284150Y-58405600D03* +%TO.N,/DIN_4G*% +X189284150Y-66025600D03* +X194364150Y-66025600D03* +%TO.N,/KCOIL*% +X194364150Y-58405600D03* +%TO.N,/USART1_TX*% +X194364150Y-55865600D03* +%TD*% +D17* +%TO.N,/BATLED1*% +%TO.C,J2*% +X107191650Y-74103100D03* +D18* +%TO.N,/BATLED2*% +X109731650Y-74103100D03* +%TO.N,/BATLED3*% +X112271650Y-74103100D03* +%TO.N,/BATLED4*% +X114811650Y-74103100D03* +%TO.N,/CHRG_EN*% +X117351650Y-74103100D03* +%TO.N,/USART1_TX*% +X119891650Y-74103100D03* +%TO.N,USART1_RX*% +X122431650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_8-Pad8)*% +X124971650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_9-Pad9)*% +X127511650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_10-Pad10)*% +X130051650Y-74103100D03* +%TO.N,/CHRG_STAT*% +X132591650Y-74103100D03* +%TO.N,/CHRG_FAULT*% +X135131650Y-74103100D03* +%TO.N,/BYP_CTRL*% +X137671650Y-74103100D03* +%TO.N,/I2C_SCL*% +X140211650Y-74103100D03* +%TO.N,/I2C_SDA*% +X142751650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_16-Pad16)*% +X145291650Y-74103100D03* +%TO.N,unconnected-(J2-Pin_17-Pad17)*% +X147831650Y-74103100D03* +%TO.N,/SYS5V*% +X150371650Y-74103100D03* +%TO.N,GND*% +X152911650Y-74103100D03* +%TO.N,3V3*% +X155451650Y-74103100D03* +%TD*% +D30* +%TO.N,/NRST*% +%TO.C,SW1*% +X199191650Y-133323100D03* +X205691650Y-133323100D03* +%TO.N,GND*% +X199191650Y-137823100D03* +X205691650Y-137823100D03* +%TD*% +D14* +%TO.N,/SW_5V*% +%TO.C,P3*% +X210191650Y-95323100D03* +D13* +%TO.N,GND*% +X210191650Y-92823100D03* +%TO.N,/GNSS_TX*% +X210191650Y-90323100D03* +%TO.N,/GNSS_RX*% +X210191650Y-87823100D03* +%TD*% +D31* +%TO.N,unconnected-(MOD1-NC-Pad1)*% +%TO.C,MOD1*% +X115251650Y-129583100D03* +D32* +%TO.N,3V3*% +X117791650Y-129583100D03* +%TO.N,unconnected-(MOD1-RESET-Pad3)*% +X120331650Y-129583100D03* +%TO.N,unconnected-(MOD1-3V3_OUT-Pad4)*% +X122871650Y-129583100D03* +%TO.N,/SW_5V*% +X125411650Y-129583100D03* +%TO.N,GND*% +X127951650Y-129583100D03* +X130491650Y-129583100D03* +%TO.N,unconnected-(MOD1-VIN-Pad8)*% +X133031650Y-129583100D03* +%TO.N,unconnected-(MOD1-A0-Pad9)*% +X138111650Y-129583100D03* +%TO.N,unconnected-(MOD1-A1-Pad10)*% +X140651650Y-129583100D03* +%TO.N,unconnected-(MOD1-A2-Pad11)*% +X143191650Y-129583100D03* +%TO.N,unconnected-(MOD1-A3-Pad12)*% +X145731650Y-129583100D03* +%TO.N,unconnected-(MOD1-A4-Pad13)*% +X148271650Y-129583100D03* +%TO.N,unconnected-(MOD1-A5-Pad14)*% +X150811650Y-129583100D03* +%TO.N,/GNSS_RX*% +X150811650Y-81323100D03* +%TO.N,/GNSS_TX*% +X148271650Y-81323100D03* +%TO.N,/DOUT_4G*% +X145731650Y-81323100D03* +%TO.N,unconnected-(MOD1-D3-Pad18)*% +X143191650Y-81323100D03* +%TO.N,unconnected-(MOD1-D4-Pad19)*% +X140651650Y-81323100D03* +%TO.N,unconnected-(MOD1-D5-Pad20)*% +X138111650Y-81323100D03* +%TO.N,unconnected-(MOD1-D6-Pad21)*% +X135571650Y-81323100D03* +%TO.N,unconnected-(MOD1-D7-Pad22)*% +X133031650Y-81323100D03* +%TO.N,USART1_RX*% +X128971650Y-81323100D03* +%TO.N,unconnected-(MOD1-D9-Pad24)*% +X126431650Y-81323100D03* +%TO.N,unconnected-(MOD1-D10-Pad25)*% +X123891650Y-81323100D03* +%TO.N,unconnected-(MOD1-FENCE_D11-Pad26)*% +X121351650Y-81323100D03* +%TO.N,unconnected-(MOD1-EXTINT_D12-Pad27)*% +X118811650Y-81323100D03* +%TO.N,unconnected-(MOD1-TPS_D13-Pad28)*% +X116271650Y-81323100D03* +%TO.N,GND*% +X113731650Y-81323100D03* +%TO.N,unconnected-(MOD1-AREF-Pad30)*% +X111191650Y-81323100D03* +%TO.N,unconnected-(MOD1-SDA-Pad31)*% +X108651650Y-81323100D03* +%TO.N,unconnected-(MOD1-SCL-Pad32)*% +X106111650Y-81323100D03* +%TD*% +D33* +%TO.N,/GATE_LS*% +X160693550Y-59682200D03* +X154750000Y-63373100D03* +%TO.N,USART1_RX*% +X166039950Y-75929300D03* +X128569450Y-92441500D03* +X110777250Y-111539100D03* +%TO.N,/DIN_4G*% +X160280550Y-60946000D03* +X163333350Y-77836400D03* +%TO.N,GND*% +X109641650Y-76773100D03* +X88641650Y-111773100D03* +X158641650Y-48773100D03* +X165641650Y-55773100D03* +X137641650Y-48773100D03* +X102641650Y-132773100D03* +X102641650Y-118773100D03* +X81641650Y-132773100D03* +X137641650Y-41773100D03* +X194700000Y-105900000D03* +X109641650Y-125773100D03* +X191350000Y-114800000D03* +X116641650Y-97773100D03* +X88641650Y-97773100D03* +X95641650Y-76773100D03* +X109641650Y-132773100D03* +X130641650Y-132773100D03* +X126400000Y-95400000D03* +X109641650Y-62773100D03* +X81641650Y-76773100D03* +X88641650Y-41773100D03* +X102600000Y-99150000D03* +X116641650Y-132773100D03* +X144641650Y-48773100D03* +X88641650Y-104773100D03* +X144641650Y-132773100D03* +X158641650Y-125773100D03* +X109641650Y-90773100D03* +X102641650Y-125773100D03* +X151641650Y-118773100D03* +X158641650Y-132773100D03* +X137641650Y-132773100D03* +X158641650Y-83773100D03* +X95641650Y-132773100D03* +X195146650Y-110668100D03* +X158641650Y-111773100D03* +X88641650Y-76773100D03* +X81641650Y-62773100D03* +X88641650Y-48773100D03* +X130641650Y-69773100D03* +X99300000Y-114700000D03* +X177916650Y-45323100D03* +X116641650Y-125773100D03* +X123641650Y-48773100D03* +X81641650Y-41773100D03* +X138200000Y-91700000D03* +X137641650Y-111773100D03* +X116641650Y-118773100D03* +X88641650Y-83773100D03* +X123641650Y-125773100D03* +X144641650Y-111773100D03* +X165641650Y-41773100D03* +X130641650Y-111773100D03* +X95641650Y-104773100D03* +X123641650Y-83773100D03* +X130200000Y-99700000D03* +X81641650Y-111773100D03* +X123641650Y-69773100D03* +X116641650Y-76773100D03* +X81641650Y-104773100D03* +X187350000Y-62946400D03* +X88641650Y-132773100D03* +X87600000Y-58750000D03* +X144641650Y-41773100D03* +X130200000Y-106000000D03* +X130641650Y-76773100D03* +X81641650Y-48773100D03* +X116641650Y-62773100D03* +X109641650Y-97773100D03* +X116641650Y-48773100D03* +X88641650Y-90773100D03* +X95000000Y-114550000D03* +X81641650Y-83773100D03* +X81641650Y-118773100D03* +X151641650Y-104773100D03* +X88641650Y-69773100D03* +X95641650Y-90773100D03* +X95641650Y-118773100D03* +X81641650Y-69773100D03* +X151641650Y-132773100D03* +X95641650Y-125773100D03* +X81641650Y-97773100D03* +X151641650Y-41773100D03* +X135000000Y-97200000D03* +X88641650Y-118773100D03* +X158641650Y-69773100D03* +X109641650Y-118773100D03* +X165641650Y-48773100D03* +X158641650Y-41773100D03* +X102641650Y-48773100D03* +X95641650Y-41773100D03* +X81641650Y-55773100D03* +X165641650Y-69773100D03* +X95641650Y-111773100D03* +X88641650Y-125773100D03* +X123641650Y-132773100D03* +X127200000Y-118600000D03* +X81641650Y-90773100D03* +X151641650Y-125773100D03* +X123641650Y-76773100D03* +X81641650Y-125773100D03* +X101650000Y-85500000D03* +X144641650Y-118773100D03* +X100016650Y-94323100D03* +%TO.N,IGN_SENSE*% +X98158150Y-78069300D03* +X97851650Y-82803100D03* +X100361150Y-84328200D03* +X120700000Y-67650000D03* +%TO.N,SW_FAN*% +X166684150Y-63823100D03* +X170312950Y-55362600D03* +%TO.N,/5V_FAN*% +X179603350Y-49835200D03* +X190530850Y-50051900D03* +%TO.N,/FAN_RET*% +X108674350Y-96377200D03* +X154715450Y-93359800D03* +X102589950Y-100215700D03* +%TO.N,FAN_TACH_RAW*% +X99473450Y-103450700D03* +X175683950Y-98459400D03* +%TO.N,/EN_FAN*% +X173406650Y-53346300D03* +X174360750Y-60216800D03* +D34* +%TO.N,/BAT_PLUS*% +X119381650Y-89423100D03* +X126821650Y-89223100D03* +D33* +X93354250Y-109584900D03* +X116831650Y-109478500D03* +%TO.N,/NTC*% +X125531650Y-94123100D03* +X115743450Y-105395800D03* +%TO.N,/NRST*% +X124192950Y-57474800D03* +%TO.N,/SW3_NODE*% +X188691650Y-107616000D03* +X187096850Y-116026900D03* +%TO.N,/SW_5V*% +X171760150Y-97690900D03* +D34* +X202151650Y-113193100D03* +D33* +X171616850Y-113477300D03* +X156800000Y-63900000D03* +%TO.N,/FB3*% +X188669750Y-102323100D03* +X196890950Y-110544300D03* +X181474350Y-109498300D03* +%TO.N,/BST3*% +X187141650Y-107717500D03* +X192976150Y-114752100D03* +%TO.N,/BAT_SENSE*% +X92198550Y-67700900D03* +X92096650Y-109080400D03* +%TO.N,/PWR_CTRL*% +X161642250Y-61571200D03* +%TO.N,/5V_SENSE*% +X94238250Y-70412600D03* +X106831950Y-111582800D03* +%TO.N,FAN_PWM*% +X96481050Y-72166600D03* +X93366650Y-93338100D03* +%TO.N,EXT_LED*% +X93850000Y-69300000D03* +X91096750Y-104059500D03* +%TO.N,/NTC_TEMP*% +X164399250Y-108749200D03* +X169737250Y-114087200D03* +%TO.N,FAN_TACH*% +X147661250Y-69044000D03* +X96632650Y-78671100D03* +X98373850Y-101217400D03* +%TO.N,3V3*% +X134491750Y-98820000D03* +X94149150Y-84401600D03* +X99126050Y-102323100D03* +X133429550Y-103586000D03* +X153056550Y-96999800D03* +X132141650Y-111318200D03* +X94584350Y-46323100D03* +%TO.N,/COMP3_C*% +X185251750Y-114635100D03* +X185102650Y-116791200D03* +%TO.N,/MAIN5V*% +X125649250Y-91964400D03* +X118024250Y-91808100D03* +X101515750Y-77180100D03* +%TO.N,/SW_IN*% +X153600000Y-64200000D03* +X135500000Y-61250000D03* +X152216950Y-51550500D03* +X142150000Y-60950000D03* +%TO.N,FAN_GATE*% +X99480750Y-93353800D03* +X102921150Y-95462200D03* +%TO.N,/IGATE*% +X125151650Y-94993100D03* +X113056750Y-91373700D03* +%TO.N,/I2C_SDA*% +X126615050Y-111714800D03* +X101976450Y-75485300D03* +X127665550Y-92441500D03* +%TO.N,/MODEM_LED*% +X198850000Y-88800000D03* +X200050000Y-84450000D03* +%TO.N,/MODEM_LED_A*% +X203900000Y-86050000D03* +X203900000Y-89600000D03* +%TO.N,/I2C_SCL*% +X126634150Y-113349000D03* +X114758150Y-48379800D03* +X129603150Y-92460000D03* +X137323450Y-88991500D03* +%TO.N,/3V3_MODEM*% +X193850000Y-86850000D03* +X190900000Y-89050000D03* +X176066750Y-104039400D03* +X209550000Y-113750000D03* +%TO.N,/MODEM_RST*% +X141900000Y-135600000D03* +%TO.N,/USB_VBUS*% +X167850000Y-84700000D03* +%TO.N,/VEH5V*% +X117951650Y-94803100D03* +X124691650Y-94303100D03* +X166798050Y-79030300D03* +X102876050Y-80722800D03* +%TO.N,/LED_A*% +X177369150Y-107426100D03* +X101070250Y-115089600D03* +X99789850Y-107426100D03* +%TO.N,/24V_IN*% +X91070550Y-62038400D03* +%TO.N,/BASE_LS*% +X164501350Y-60325100D03* +X155562650Y-61161300D03* +%TO.N,/FB_FAN*% +X177545250Y-46302100D03* +X173372150Y-49792700D03* +%TO.N,BST_FAN*% +X168394750Y-46076200D03* +X166741750Y-55441500D03* +%TO.N,/SW_BAT*% +X163800000Y-91850000D03* +X131319350Y-83542700D03* +%TO.N,/BATLED3*% +X166527050Y-75260400D03* +X200007250Y-48492500D03* +%TO.N,/CLPROG_TP*% +X114646550Y-94202200D03* +X113191650Y-106044500D03* +%TO.N,/BATLED4*% +X169830950Y-65597500D03* +X183644750Y-51599100D03* +%TO.N,/F0_SEL*% +X141742750Y-98569500D03* +X124831650Y-95933100D03* +%TO.N,/LED_K*% +X173946950Y-108033000D03* +X110969350Y-113108400D03* +%TO.N,/BATLED2*% +X196017950Y-48827700D03* +X181693450Y-60961400D03* +%TO.N,/USB_CC2*% +X167500000Y-125600000D03* +%TO.N,IGN_IN*% +X104345350Y-71164600D03* +%TO.N,/PFI*% +X124054450Y-91327700D03* +X103327750Y-84222500D03* +X106503750Y-97236300D03* +X107654450Y-82308900D03* +%TO.N,/BATLED1*% +X189562750Y-50997400D03* +X164175850Y-64973500D03* +%TO.N,/CHRG_EN*% +X98082650Y-74113300D03* +X116831050Y-94436200D03* +X105480950Y-106336700D03* +%TO.N,/CHRG_STAT*% +X135231550Y-98013400D03* +X126664550Y-98079400D03* +X140542950Y-92479800D03* +%TO.N,/CHRG_FAULT*% +X144410950Y-96559700D03* +X127507350Y-95248400D03* +%TO.N,/PROG*% +X113901850Y-103113300D03* +X113519050Y-94430400D03* +%TO.N,/VFB_BST*% +X134239650Y-97200400D03* +X130447050Y-92807700D03* +X122002950Y-97751700D03* +%TO.N,/F2_SEL*% +X123382550Y-96548400D03* +X136675750Y-95494500D03* +%TO.N,/F1_SEL*% +X138135550Y-97466200D03* +X127321350Y-96853600D03* +%TD*% +%TO.N,/GATE_LS*% +D35* +X154814850Y-63373100D02* +X155615150Y-62572800D01* +X157802950Y-62572800D02* +X160693550Y-59682200D01* +X154750000Y-63373100D02* +X154814850Y-63373100D01* +X155615150Y-62572800D02* +X157802950Y-62572800D01* +%TO.N,/SYS5V*% +D36* +X150371650Y-74103100D02* +X150371650Y-64033500D01* +X150371650Y-64033500D02* +X155451650Y-58953500D01* +X155451650Y-58953500D02* +X155451650Y-56323100D01* +%TO.N,USART1_RX*% +D35* +X113651650Y-48863100D02* +X113651650Y-65323100D01* +X166039950Y-75929300D02* +X167918750Y-75929300D01* +X167918750Y-75929300D02* +X187982450Y-55865600D01* +X128971650Y-81323100D02* +X128971650Y-80221400D01* +X116191650Y-46323100D02* +X115964050Y-46323100D01* +X189284150Y-55865600D02* +X187982450Y-55865600D01* +X128971650Y-80221400D02* +X128549950Y-80221400D01* +X113651650Y-65323100D02* +X122431650Y-74103100D01* +X111557650Y-112319500D02* +X126865550Y-112319500D01* +X111191650Y-48863100D02* +X113651650Y-48863100D01* +X115964050Y-46323100D02* +X113651650Y-48635500D01* +X128569450Y-110615600D02* +X128569450Y-92441500D01* +X126865550Y-112319500D02* +X128569450Y-110615600D01* +X128549950Y-80221400D02* +X122431650Y-74103100D01* +X110777250Y-111539100D02* +X111557650Y-112319500D01* +X113651650Y-48635500D02* +X113651650Y-48863100D01* +%TO.N,/DIN_4G*% +X176486650Y-78823100D02* +X189284150Y-66025600D01* +X174191650Y-78823100D02* +X176486650Y-78823100D01* +X160280550Y-60946000D02* +X160280550Y-74783600D01* +X194364150Y-66025600D02* +X189284150Y-66025600D01* +X160280550Y-74783600D02* +X163333350Y-77836400D01* +%TO.N,IGN_SENSE*% +X97853050Y-78374400D02* +X98158150Y-78069300D01* +X97853050Y-82801700D02* +X97853050Y-78374400D01* +X97851650Y-82803100D02* +X97851650Y-83206700D01* +X97851650Y-82803100D02* +X97853050Y-82801700D01* +X97851650Y-83206700D02* +X98973150Y-84328200D01* +X98973150Y-84328200D02* +X100361150Y-84328200D01* +%TO.N,SW_FAN*% +D37* +X170312950Y-55362600D02* +X170312950Y-60194300D01* +X170312950Y-60194300D02* +X166684150Y-63823100D01* +%TO.N,/5V_FAN*% +X190314150Y-49835200D02* +X179603350Y-49835200D01* +X190530850Y-50051900D02* +X190314150Y-49835200D01* +%TO.N,/FAN_RET*% +X192081150Y-60271900D02* +X188027650Y-64325400D01* +X108674350Y-96482300D02* +X108674350Y-96377200D01* +X174800000Y-71700000D02* +X169143150Y-77356850D01* +X169143150Y-77356850D02* +X169143150Y-78932100D01* +X180650000Y-71700000D02* +X174800000Y-71700000D01* +X169143150Y-78932100D02* +X154715450Y-93359800D01* +X197013150Y-59323100D02* +X196064350Y-60271900D01* +X196064350Y-60271900D02* +X192081150Y-60271900D01* +X210191650Y-59323100D02* +X197013150Y-59323100D01* +X102589950Y-100215700D02* +X104940950Y-100215700D01* +X188024600Y-64325400D02* +X180650000Y-71700000D01* +X188027650Y-64325400D02* +X188024600Y-64325400D01* +X104940950Y-100215700D02* +X108674350Y-96482300D01* +%TO.N,FAN_TACH_RAW*% +D35* +X208460150Y-66238000D02* +X208460150Y-70313000D01* +X210643350Y-55474800D02* +X211485350Y-56316800D01* +X210191650Y-55474800D02* +X210643350Y-55474800D01* +X196950050Y-81823100D02* +X192320250Y-81823100D01* +X208460150Y-70313000D02* +X196950050Y-81823100D01* +X192320250Y-81823100D02* +X175683950Y-98459400D01* +X211485350Y-56316800D02* +X211485350Y-63212800D01* +X210191650Y-54323100D02* +X210191650Y-55474800D01* +X211485350Y-63212800D02* +X208460150Y-66238000D01* +%TO.N,/EN_FAN*% +X173406650Y-59262700D02* +X173406650Y-53346300D01* +X174360750Y-60216800D02* +X173406650Y-59262700D01* +%TO.N,/NTC*% +X116718950Y-105395800D02* +X125771650Y-96343100D01* +X125771650Y-94363100D02* +X125531650Y-94123100D01* +X125771650Y-96343100D02* +X125771650Y-94363100D01* +X115743450Y-105395800D02* +X116718950Y-105395800D01* +%TO.N,/NRST*% +X210166650Y-80073100D02* +X205691650Y-84548100D01* +X144461650Y-89823700D02* +X184841650Y-130203700D01* +X141481650Y-73733800D02* +X141481650Y-76531300D01* +X205691650Y-84548100D02* +X205691650Y-133323100D01* +X184841650Y-130203700D02* +X196072250Y-130203700D01* +X125222650Y-57474800D02* +X141481650Y-73733800D01* +X141481650Y-76531300D02* +X144461650Y-79511300D01* +X144461650Y-79511300D02* +X144461650Y-89823700D01* +X124192950Y-57474800D02* +X125222650Y-57474800D01* +X196072250Y-130203700D02* +X199191650Y-133323100D01* +%TO.N,/SW3_NODE*% +D37* +X187096850Y-109210800D02* +X188691650Y-107616000D01* +X187096850Y-116026900D02* +X187096850Y-109210800D01* +%TO.N,/SW_5V*% +X156800000Y-63900000D02* +X156800000Y-64087650D01* +X157010150Y-64297800D02* +X157010150Y-87333100D01* +X157010150Y-87333100D02* +X153504950Y-90838300D01* +X167171050Y-102280000D02* +X171760150Y-97690900D01* +X156800000Y-64087650D02* +X157010150Y-64297800D01* +X167171050Y-109031500D02* +X167171050Y-102280000D01* +X153504950Y-90838300D02* +X153504950Y-93892000D01* +X171616850Y-113477300D02* +X167171050Y-109031500D01* +X153504950Y-93892000D02* +X161892950Y-102280000D01* +X161892950Y-102280000D02* +X167171050Y-102280000D01* +%TO.N,/FB3*% +D35* +X196890950Y-110544300D02* +X188669750Y-102323100D01* +X181474350Y-109498300D02* +X188649550Y-102323100D01* +X188649550Y-102323100D02* +X188669750Y-102323100D01* +%TO.N,/BST3*% +X189077150Y-106796800D02* +X192976150Y-110695800D01* +X188062350Y-106796800D02* +X189077150Y-106796800D01* +X192976150Y-110695800D02* +X192976150Y-114752100D01* +X187141650Y-107717500D02* +X188062350Y-106796800D01* +%TO.N,/BAT_SENSE*% +X90491350Y-107475100D02* +X92096650Y-109080400D01* +X92198550Y-67700900D02* +X90491350Y-69408100D01* +X90491350Y-69408100D02* +X90491350Y-107475100D01* +%TO.N,/GNSS_TX*% +X133931450Y-65282900D02* +X124971650Y-56323100D01* +X135598250Y-65282900D02* +X133931450Y-65282900D01* +X144021650Y-75971400D02* +X144021650Y-73706300D01* +X148271650Y-81323100D02* +X148271650Y-80221400D01* +X148271650Y-80221400D02* +X144021650Y-75971400D01* +X144021650Y-73706300D02* +X135598250Y-65282900D01* +%TO.N,/GNSS_RX*% +X127511650Y-56323100D02* +X133043850Y-61855300D01* +X146561650Y-73511650D02* +X146561650Y-75971400D01* +X150811650Y-80221400D02* +X150811650Y-81323100D01* +X146561650Y-75971400D02* +X150811650Y-80221400D01* +X134905300Y-61855300D02* +X146561650Y-73511650D01* +X133043850Y-61855300D02* +X134905300Y-61855300D01* +%TO.N,/5V_SENSE*% +X94238250Y-70412600D02* +X92764850Y-71886000D01* +X92764850Y-71886000D02* +X92764850Y-97592900D01* +X106754750Y-111582800D02* +X106831950Y-111582800D01* +X92764850Y-97592900D02* +X106754750Y-111582800D01* +%TO.N,FAN_PWM*% +X93366650Y-75281000D02* +X96481050Y-72166600D01* +X93366650Y-93338100D02* +X93366650Y-75281000D01* +%TO.N,EXT_LED*% +X91096750Y-70444400D02* +X91096750Y-104059500D01* +X92241150Y-69300000D02* +X91096750Y-70444400D01* +X93850000Y-69300000D02* +X92241150Y-69300000D01* +%TO.N,/NTC_TEMP*% +X152454850Y-95314800D02* +X152454850Y-97248900D01* +X152807450Y-97601500D02* +X153251550Y-97601500D01* +X142751650Y-56323100D02* +X142751650Y-67123100D01* +X152454850Y-97248900D02* +X152807450Y-97601500D01* +X142751650Y-67123100D02* +X149101650Y-73473100D01* +X149101650Y-73473100D02* +X149101650Y-75898100D01* +X149101650Y-75898100D02* +X152177450Y-78973900D01* +X169737250Y-114087200D02* +X164399250Y-108749200D01* +X152177450Y-78973900D02* +X152177450Y-95037400D01* +X152177450Y-95037400D02* +X152454850Y-95314800D01* +X153251550Y-97601500D02* +X164399250Y-108749200D01* +%TO.N,FAN_TACH*% +X147831650Y-68873600D02* +X147661250Y-69044000D01* +X147831650Y-56323100D02* +X147831650Y-68873600D01* +X96632650Y-99476200D02* +X96632650Y-78671100D01* +X98373850Y-101217400D02* +X96632650Y-99476200D01* +%TO.N,3V3*% +X156330250Y-61293400D02* +X155854250Y-61769400D01* +X154906850Y-61769400D02* +X152485350Y-64190900D01* +X94149150Y-97843500D02* +X98628750Y-102323100D01* +X156646350Y-55886900D02* +X156646350Y-60643300D01* +X134491750Y-102523800D02* +X134491750Y-98820000D01* +X152485350Y-71136800D02* +X155451650Y-74103100D01* +X152092150Y-54602600D02* +X155362050Y-54602600D01* +X97092650Y-73418700D02* +X97092650Y-71392650D01* +X90247950Y-64547950D02* +X90247950Y-50659500D01* +X152679150Y-94522500D02* +X153056550Y-94899900D01* +X133429550Y-103586000D02* +X134491750Y-102523800D01* +X97092650Y-71392650D02* +X90247950Y-64547950D01* +X153056550Y-94899900D02* +X153056550Y-96999800D01* +X117791650Y-129583100D02* +X117791650Y-120918000D01* +X155451650Y-74103100D02* +X152679150Y-76875600D01* +X132141650Y-111318200D02* +X132141650Y-104873900D01* +X99196750Y-102323100D02* +X99126050Y-102323100D01* +X90247950Y-50659500D02* +X94584350Y-46323100D01* +X117791650Y-120918000D02* +X99196750Y-102323100D01* +X98628750Y-102323100D02* +X99126050Y-102323100D01* +X155854250Y-61769400D02* +X154906850Y-61769400D01* +X152485350Y-64190900D02* +X152485350Y-71136800D01* +X152679150Y-76875600D02* +X152679150Y-94522500D01* +X94149150Y-84401600D02* +X94149150Y-97843500D01* +X150371650Y-56323100D02* +X152092150Y-54602600D01* +X94149150Y-84401600D02* +X94149150Y-76362200D01* +X156330250Y-60959400D02* +X156330250Y-61293400D01* +X156646350Y-60643300D02* +X156330250Y-60959400D01* +X155362050Y-54602600D02* +X156646350Y-55886900D01* +X94149150Y-76362200D02* +X97092650Y-73418700D01* +X132141650Y-104873900D02* +X133429550Y-103586000D01* +%TO.N,/COMP3_C*% +X185251750Y-114635100D02* +X185102650Y-114784200D01* +X185102650Y-114784200D02* +X185102650Y-116791200D01* +%TO.N,/MAIN5V*% +D36* +X132135150Y-42666600D02* +X135791650Y-46323100D01* +X125618450Y-92086600D02* +X125618450Y-91995200D01* +X100536050Y-62101700D02* +X96374750Y-57940400D01* +X125125650Y-92579400D02* +X125618450Y-92086600D01* +X118795550Y-92579400D02* +X125125650Y-92579400D01* +X96374750Y-45076400D02* +X98784550Y-42666600D01* +X96374750Y-57940400D02* +X96374750Y-45076400D01* +X98784550Y-42666600D02* +X132135150Y-42666600D01* +X100536050Y-76200400D02* +X100536050Y-62101700D01* +X101515750Y-77180100D02* +X100536050Y-76200400D01* +X125618450Y-91995200D02* +X125649250Y-91964400D01* +X118024250Y-91808100D02* +X118795550Y-92579400D01* +%TO.N,/SW_IN*% +D35* +X155487050Y-54159600D02* +X154826050Y-54159600D01* +X155099750Y-62171100D02* +X156020550Y-62171100D01* +X137350000Y-63650000D02* +X139450000Y-63650000D01* +X153600000Y-64200000D02* +X153600000Y-63670850D01* +X154826050Y-54159600D02* +X152216950Y-51550500D01* +X157048050Y-61143600D02* +X157048050Y-55720600D01* +X139450000Y-63650000D02* +X142150000Y-60950000D01* +X156020550Y-62171100D02* +X157048050Y-61143600D01* +X135500000Y-61800000D02* +X137350000Y-63650000D01* +X153600000Y-63670850D02* +X155099750Y-62171100D01* +X157048050Y-55720600D02* +X155487050Y-54159600D01* +X135500000Y-61250000D02* +X135500000Y-61800000D01* +%TO.N,FAN_GATE*% +X99480750Y-93353800D02* +X100812750Y-93353800D01* +X100812750Y-93353800D02* +X102921150Y-95462200D01* +%TO.N,/IGATE*% +X125151650Y-94993100D02* +X125121650Y-95023100D01* +X119024950Y-95023100D02* +X115375550Y-91373700D01* +X115375550Y-91373700D02* +X113056750Y-91373700D01* +X125121650Y-95023100D02* +X119024950Y-95023100D01* +%TO.N,/I2C_SDA*% +X128109050Y-110220800D02* +X128109050Y-92885000D01* +X102039950Y-47474800D02* +X102039950Y-46323100D01* +X101801350Y-75310200D02* +X101801350Y-47713400D01* +X128109050Y-92885000D02* +X127665550Y-92441500D01* +X103191650Y-46323100D02* +X102039950Y-46323100D01* +X101976450Y-75485300D02* +X101801350Y-75310200D01* +X126615050Y-111714800D02* +X128109050Y-110220800D01* +X101801350Y-47713400D02* +X102039950Y-47474800D01* +%TO.N,/I2C_SCL*% +X121161650Y-56719900D02* +X121161650Y-54783300D01* +X121161650Y-54783300D02* +X114758150Y-48379800D01* +X137323450Y-88991500D02* +X137323450Y-88059600D01* +X140211650Y-74103100D02* +X136109050Y-70000500D01* +X131430750Y-73012000D02* +X134442250Y-70000500D01* +X129603150Y-110380000D02* +X129603150Y-92460000D01* +X134442250Y-70000500D02* +X121161650Y-56719900D01* +X131430750Y-82166900D02* +X131430750Y-73012000D01* +X126634150Y-113349000D02* +X129603150Y-110380000D01* +X136109050Y-70000500D02* +X134442250Y-70000500D01* +X137323450Y-88059600D02* +X131430750Y-82166900D01* +%TO.N,/3V3_MODEM*% +D37* +X172811850Y-76202900D02* +X174191650Y-74823100D01* +X176066750Y-104039400D02* +X176066750Y-100298000D01* +X176066750Y-100298000D02* +X172811850Y-97043100D01* +X191650000Y-89050000D02* +X190900000Y-89050000D01* +X193850000Y-86850000D02* +X191650000Y-89050000D01* +X172811850Y-97043100D02* +X172811850Y-76202900D01* +%TO.N,/VEH5V*% +D36* +X103228150Y-76003800D02* +X103228150Y-74966800D01* +X102876050Y-78226400D02* +X103217450Y-77885000D01* +X107967250Y-46736500D02* +X107967250Y-46492700D01* +X107967250Y-46492700D02* +X110091350Y-44368600D01* +X102876050Y-74614700D02* +X102876050Y-51827700D01* +X103217450Y-77885000D02* +X103217450Y-76475200D01* +X110091350Y-44368600D02* +X125237150Y-44368600D01* +X162924150Y-75156400D02* +X162924150Y-60109400D01* +X102876050Y-51827700D02* +X107967250Y-46736500D01* +X103228150Y-74966800D02* +X102876050Y-74614700D01* +X127191650Y-46585800D02* +X127191650Y-46323100D01* +X162924150Y-60109400D02* +X153113550Y-50298800D01* +X166798050Y-79030300D02* +X162924150Y-75156400D01* +X103217450Y-76475200D02* +X102987150Y-76244900D01* +X102876050Y-80722800D02* +X102876050Y-78226400D01* +X125237150Y-44368600D02* +X127191650Y-46323100D01* +X130904650Y-50298800D02* +X127191650Y-46585800D01* +X102987150Y-76244900D02* +X102987150Y-76244800D01* +X153113550Y-50298800D02* +X130904650Y-50298800D01* +X102987150Y-76244800D02* +X103228150Y-76003800D01* +%TO.N,/LED_A*% +D35* +X99789850Y-113809200D02* +X99789850Y-107426100D01* +X196969950Y-89823100D02* +X194972150Y-89823100D01* +X210166650Y-70825200D02* +X206021250Y-74970600D01* +X206021250Y-74970600D02* +X206021250Y-80771800D01* +X101070250Y-115089600D02* +X99789850Y-113809200D01* +X206021250Y-80771800D02* +X196969950Y-89823100D01* +X210166650Y-70823100D02* +X210166650Y-70825200D01* +X194972150Y-89823100D02* +X177369150Y-107426100D01* +%TO.N,/24V_IN*% +D37* +X172691650Y-133823100D02* +X172691650Y-133541650D01* +X172600000Y-127350000D02* +X172600000Y-133731450D01* +X99084350Y-70052200D02* +X91070550Y-62038400D01* +X103321050Y-83220800D02* +X99159850Y-79059600D01* +X103742650Y-83220800D02* +X103321050Y-83220800D01* +X99159850Y-77654400D02* +X99084350Y-77578900D01* +X118625550Y-90356400D02* +X110878250Y-90356400D01* +X129662700Y-90512700D02* +X166500000Y-127350000D01* +X124852050Y-90708600D02* +X124851950Y-90708600D01* +X123238750Y-90726900D02* +X118996050Y-90726900D01* +X129662700Y-90512700D02* +X125047950Y-90512700D01* +X99084350Y-77578900D02* +X99084350Y-70052200D01* +X124469350Y-90326000D02* +X123639650Y-90326000D01* +X99159850Y-79059600D02* +X99159850Y-77654400D01* +X166500000Y-127350000D02* +X172600000Y-127350000D01* +X110878250Y-90356400D02* +X103742650Y-83220800D01* +X118996050Y-90726900D02* +X118625550Y-90356400D01* +X172600000Y-133731450D02* +X172691650Y-133823100D01* +X124851950Y-90708600D02* +X124469350Y-90326000D01* +X123639650Y-90326000D02* +X123238750Y-90726900D01* +X125047950Y-90512700D02* +X124852050Y-90708600D01* +%TO.N,/FB_FAN*% +D35* +X173372150Y-49792700D02* +X174054650Y-49792700D01* +X174054650Y-49792700D02* +X177545250Y-46302100D01* +%TO.N,BST_FAN*% +X166741750Y-47729200D02* +X168394750Y-46076200D01* +X166741750Y-55441500D02* +X166741750Y-47729200D01* +%TO.N,/USART1_TX*% +X111061650Y-54619600D02* +X111061650Y-65273100D01* +X111191650Y-47474800D02* +X110903650Y-47474800D01* +X110039950Y-48338500D02* +X110039950Y-53597900D01* +X111191650Y-46323100D02* +X111191650Y-47474800D01* +X110039950Y-53597900D02* +X111061650Y-54619600D01* +X111061650Y-65273100D02* +X119891650Y-74103100D01* +X110903650Y-47474800D02* +X110039950Y-48338500D01* +%TO.N,/BATLED3*% +X199740750Y-48226000D02* +X193561450Y-48226000D01* +X193561450Y-48226000D02* +X166527050Y-75260400D01* +X200007250Y-48492500D02* +X199740750Y-48226000D01* +%TO.N,/CLPROG_TP*% +X114271450Y-93827100D02* +X114646550Y-94202200D01* +X113191650Y-106044500D02* +X112898950Y-105751800D01* +X112898950Y-94126500D02* +X113198350Y-93827100D01* +X112898950Y-105751800D02* +X112898950Y-94126500D01* +X113198350Y-93827100D02* +X114271450Y-93827100D01* +%TO.N,/BATLED4*% +X183644750Y-51783700D02* +X183644750Y-51599100D01* +X169830950Y-65597500D02* +X183644750Y-51783700D01* +%TO.N,/LED_K*% +X196991850Y-87823100D02* +X194156850Y-87823100D01* +X197760750Y-82663100D02* +X197760750Y-87054200D01* +X208861850Y-69996400D02* +X208861850Y-71562000D01* +X194156850Y-87823100D02* +X173946950Y-108033000D01* +X208861850Y-71562000D02* +X197760750Y-82663100D01* +X197760750Y-87054200D02* +X196991850Y-87823100D01* +X210166650Y-69474800D02* +X209383450Y-69474800D01* +X209383450Y-69474800D02* +X208861850Y-69996400D01* +X210166650Y-68323100D02* +X210166650Y-69474800D01* +%TO.N,/BATLED2*% +X196017950Y-48827700D02* +X193827150Y-48827700D01* +X193827150Y-48827700D02* +X181693450Y-60961400D01* +%TO.N,IGN_IN*% +D37* +X142355150Y-97561400D02* +X146429950Y-97561400D01* +X146429950Y-97561400D02* +X182691650Y-133823100D01* +X132606850Y-87813100D02* +X142355150Y-97561400D01* +X110405450Y-87813100D02* +X132606850Y-87813100D01* +X104679850Y-71499100D02* +X104679850Y-78475600D01* +X104345350Y-71164600D02* +X104679850Y-71499100D01* +X104679850Y-78475600D02* +X104345350Y-78810100D01* +X104345350Y-81753000D02* +X110405450Y-87813100D01* +X104345350Y-78810100D02* +X104345350Y-81753000D01* +%TO.N,/PFI*% +D35* +X106503750Y-97236300D02* +X103327750Y-94060300D01* +X103327750Y-94060300D02* +X103327750Y-84222500D01* +%TO.N,/BATLED1*% +X174325650Y-66234500D02* +X165436850Y-66234500D01* +X165436850Y-66234500D02* +X164175850Y-64973500D01* +X189562750Y-50997400D02* +X174325650Y-66234500D01* +%TO.N,/CHRG_EN*% +X97242450Y-96055800D02* +X97242450Y-74953500D01* +X102237350Y-101050700D02* +X97242450Y-96055800D01* +X105480950Y-100976500D02* +X113085050Y-93372400D01* +X105480950Y-106336700D02* +X105480950Y-101050700D01* +X105480950Y-101050700D02* +X105480950Y-100976500D01* +X105480950Y-101050700D02* +X102237350Y-101050700D01* +X113085050Y-93372400D02* +X115767250Y-93372400D01* +X97242450Y-74953500D02* +X98082650Y-74113300D01* +X115767250Y-93372400D02* +X116831050Y-94436200D01* +%TO.N,/CHRG_STAT*% +X139537250Y-91474100D02* +X140542950Y-92479800D01* +X132591650Y-74103100D02* +X139537250Y-81048700D01* +X139537250Y-81048700D02* +X139537250Y-91474100D01* +%TO.N,/CHRG_FAULT*% +X141921650Y-94070400D02* +X144410950Y-96559700D01* +X135131650Y-74103100D02* +X141921650Y-80893100D01* +X141921650Y-80893100D02* +X141921650Y-94070400D01* +%TO.N,/PROG*% +X113519050Y-102730500D02* +X113901850Y-103113300D01* +X113519050Y-94430400D02* +X113519050Y-102730500D01* +%TO.N,/VFB_BST*% +X134239650Y-96600300D02* +X134239650Y-97200400D01* +X130447050Y-92807700D02* +X134239650Y-96600300D01* +%TD*% +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-NPTH-drl_map.gbr b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-NPTH-drl_map.gbr new file mode 100644 index 0000000..8770ada --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-NPTH-drl_map.gbr @@ -0,0 +1,916 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:39:54-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Drillmap*% +%TF.FilePolarity,Positive*% +%FSLAX45Y45*% +G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:39:54* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.100000*% +%ADD11C,0.200000*% +%ADD12C,0.320000*% +G04 APERTURE END LIST* +D10* +X8019165Y-4032310D02* +X21519165Y-4032310D01* +X8019165Y-14032310D02* +X8019165Y-4032310D01* +X21519165Y-4032310D02* +X21519165Y-14032310D01* +X21519165Y-14032310D02* +X8019165Y-14032310D01* +D11* +D12* +X8359165Y-4372310D02* +X8679165Y-4692310D01* +X8679165Y-4372310D02* +X8359165Y-4692310D01* +X8359165Y-13372310D02* +X8679165Y-13692310D01* +X8679165Y-13372310D02* +X8359165Y-13692310D01* +X20959165Y-4372310D02* +X21279165Y-4692310D01* +X21279165Y-4372310D02* +X20959165Y-4692310D01* +X20959165Y-13372310D02* +X21279165Y-13692310D01* +X21279165Y-13372310D02* +X20959165Y-13692310D01* +D11* +X8274942Y-14348794D02* +X8274942Y-14148794D01* +X8274942Y-14148794D02* +X8322561Y-14148794D01* +X8322561Y-14148794D02* +X8351132Y-14158318D01* +X8351132Y-14158318D02* +X8370180Y-14177365D01* +X8370180Y-14177365D02* +X8379704Y-14196413D01* +X8379704Y-14196413D02* +X8389228Y-14234508D01* +X8389228Y-14234508D02* +X8389228Y-14263079D01* +X8389228Y-14263079D02* +X8379704Y-14301175D01* +X8379704Y-14301175D02* +X8370180Y-14320222D01* +X8370180Y-14320222D02* +X8351132Y-14339270D01* +X8351132Y-14339270D02* +X8322561Y-14348794D01* +X8322561Y-14348794D02* +X8274942Y-14348794D01* +X8474942Y-14348794D02* +X8474942Y-14215460D01* +X8474942Y-14253556D02* +X8484466Y-14234508D01* +X8484466Y-14234508D02* +X8493989Y-14224984D01* +X8493989Y-14224984D02* +X8513037Y-14215460D01* +X8513037Y-14215460D02* +X8532085Y-14215460D01* +X8598751Y-14348794D02* +X8598751Y-14215460D01* +X8598751Y-14148794D02* +X8589228Y-14158318D01* +X8589228Y-14158318D02* +X8598751Y-14167841D01* +X8598751Y-14167841D02* +X8608275Y-14158318D01* +X8608275Y-14158318D02* +X8598751Y-14148794D01* +X8598751Y-14148794D02* +X8598751Y-14167841D01* +X8722561Y-14348794D02* +X8703513Y-14339270D01* +X8703513Y-14339270D02* +X8693989Y-14320222D01* +X8693989Y-14320222D02* +X8693989Y-14148794D01* +X8827323Y-14348794D02* +X8808275Y-14339270D01* +X8808275Y-14339270D02* +X8798751Y-14320222D01* +X8798751Y-14320222D02* +X8798751Y-14148794D01* +X9055894Y-14348794D02* +X9055894Y-14148794D01* +X9055894Y-14148794D02* +X9122561Y-14291651D01* +X9122561Y-14291651D02* +X9189228Y-14148794D01* +X9189228Y-14148794D02* +X9189228Y-14348794D01* +X9370180Y-14348794D02* +X9370180Y-14244032D01* +X9370180Y-14244032D02* +X9360656Y-14224984D01* +X9360656Y-14224984D02* +X9341609Y-14215460D01* +X9341609Y-14215460D02* +X9303513Y-14215460D01* +X9303513Y-14215460D02* +X9284466Y-14224984D01* +X9370180Y-14339270D02* +X9351132Y-14348794D01* +X9351132Y-14348794D02* +X9303513Y-14348794D01* +X9303513Y-14348794D02* +X9284466Y-14339270D01* +X9284466Y-14339270D02* +X9274942Y-14320222D01* +X9274942Y-14320222D02* +X9274942Y-14301175D01* +X9274942Y-14301175D02* +X9284466Y-14282127D01* +X9284466Y-14282127D02* +X9303513Y-14272603D01* +X9303513Y-14272603D02* +X9351132Y-14272603D01* +X9351132Y-14272603D02* +X9370180Y-14263079D01* +X9465418Y-14215460D02* +X9465418Y-14415460D01* +X9465418Y-14224984D02* +X9484466Y-14215460D01* +X9484466Y-14215460D02* +X9522561Y-14215460D01* +X9522561Y-14215460D02* +X9541609Y-14224984D01* +X9541609Y-14224984D02* +X9551132Y-14234508D01* +X9551132Y-14234508D02* +X9560656Y-14253556D01* +X9560656Y-14253556D02* +X9560656Y-14310698D01* +X9560656Y-14310698D02* +X9551132Y-14329746D01* +X9551132Y-14329746D02* +X9541609Y-14339270D01* +X9541609Y-14339270D02* +X9522561Y-14348794D01* +X9522561Y-14348794D02* +X9484466Y-14348794D01* +X9484466Y-14348794D02* +X9465418Y-14339270D01* +X9646370Y-14329746D02* +X9655894Y-14339270D01* +X9655894Y-14339270D02* +X9646370Y-14348794D01* +X9646370Y-14348794D02* +X9636847Y-14339270D01* +X9636847Y-14339270D02* +X9646370Y-14329746D01* +X9646370Y-14329746D02* +X9646370Y-14348794D01* +X9646370Y-14224984D02* +X9655894Y-14234508D01* +X9655894Y-14234508D02* +X9646370Y-14244032D01* +X9646370Y-14244032D02* +X9636847Y-14234508D01* +X9636847Y-14234508D02* +X9646370Y-14224984D01* +X9646370Y-14224984D02* +X9646370Y-14244032D01* +X7814165Y-14577310D02* +X8014165Y-14777310D01* +X8014165Y-14577310D02* +X7814165Y-14777310D01* +X8255894Y-14568794D02* +X8379704Y-14568794D01* +X8379704Y-14568794D02* +X8313037Y-14644984D01* +X8313037Y-14644984D02* +X8341608Y-14644984D01* +X8341608Y-14644984D02* +X8360656Y-14654508D01* +X8360656Y-14654508D02* +X8370180Y-14664032D01* +X8370180Y-14664032D02* +X8379704Y-14683079D01* +X8379704Y-14683079D02* +X8379704Y-14730698D01* +X8379704Y-14730698D02* +X8370180Y-14749746D01* +X8370180Y-14749746D02* +X8360656Y-14759270D01* +X8360656Y-14759270D02* +X8341608Y-14768794D01* +X8341608Y-14768794D02* +X8284466Y-14768794D01* +X8284466Y-14768794D02* +X8265418Y-14759270D01* +X8265418Y-14759270D02* +X8255894Y-14749746D01* +X8465418Y-14749746D02* +X8474942Y-14759270D01* +X8474942Y-14759270D02* +X8465418Y-14768794D01* +X8465418Y-14768794D02* +X8455894Y-14759270D01* +X8455894Y-14759270D02* +X8465418Y-14749746D01* +X8465418Y-14749746D02* +X8465418Y-14768794D01* +X8551132Y-14587841D02* +X8560656Y-14578318D01* +X8560656Y-14578318D02* +X8579704Y-14568794D01* +X8579704Y-14568794D02* +X8627323Y-14568794D01* +X8627323Y-14568794D02* +X8646370Y-14578318D01* +X8646370Y-14578318D02* +X8655894Y-14587841D01* +X8655894Y-14587841D02* +X8665418Y-14606889D01* +X8665418Y-14606889D02* +X8665418Y-14625937D01* +X8665418Y-14625937D02* +X8655894Y-14654508D01* +X8655894Y-14654508D02* +X8541609Y-14768794D01* +X8541609Y-14768794D02* +X8665418Y-14768794D01* +X8789228Y-14568794D02* +X8808275Y-14568794D01* +X8808275Y-14568794D02* +X8827323Y-14578318D01* +X8827323Y-14578318D02* +X8836847Y-14587841D01* +X8836847Y-14587841D02* +X8846370Y-14606889D01* +X8846370Y-14606889D02* +X8855894Y-14644984D01* +X8855894Y-14644984D02* +X8855894Y-14692603D01* +X8855894Y-14692603D02* +X8846370Y-14730698D01* +X8846370Y-14730698D02* +X8836847Y-14749746D01* +X8836847Y-14749746D02* +X8827323Y-14759270D01* +X8827323Y-14759270D02* +X8808275Y-14768794D01* +X8808275Y-14768794D02* +X8789228Y-14768794D01* +X8789228Y-14768794D02* +X8770180Y-14759270D01* +X8770180Y-14759270D02* +X8760656Y-14749746D01* +X8760656Y-14749746D02* +X8751132Y-14730698D01* +X8751132Y-14730698D02* +X8741609Y-14692603D01* +X8741609Y-14692603D02* +X8741609Y-14644984D01* +X8741609Y-14644984D02* +X8751132Y-14606889D01* +X8751132Y-14606889D02* +X8760656Y-14587841D01* +X8760656Y-14587841D02* +X8770180Y-14578318D01* +X8770180Y-14578318D02* +X8789228Y-14568794D01* +X8979704Y-14568794D02* +X8998751Y-14568794D01* +X8998751Y-14568794D02* +X9017799Y-14578318D01* +X9017799Y-14578318D02* +X9027323Y-14587841D01* +X9027323Y-14587841D02* +X9036847Y-14606889D01* +X9036847Y-14606889D02* +X9046370Y-14644984D01* +X9046370Y-14644984D02* +X9046370Y-14692603D01* +X9046370Y-14692603D02* +X9036847Y-14730698D01* +X9036847Y-14730698D02* +X9027323Y-14749746D01* +X9027323Y-14749746D02* +X9017799Y-14759270D01* +X9017799Y-14759270D02* +X8998751Y-14768794D01* +X8998751Y-14768794D02* +X8979704Y-14768794D01* +X8979704Y-14768794D02* +X8960656Y-14759270D01* +X8960656Y-14759270D02* +X8951132Y-14749746D01* +X8951132Y-14749746D02* +X8941609Y-14730698D01* +X8941609Y-14730698D02* +X8932085Y-14692603D01* +X8932085Y-14692603D02* +X8932085Y-14644984D01* +X8932085Y-14644984D02* +X8941609Y-14606889D01* +X8941609Y-14606889D02* +X8951132Y-14587841D01* +X8951132Y-14587841D02* +X8960656Y-14578318D01* +X8960656Y-14578318D02* +X8979704Y-14568794D01* +X9132085Y-14768794D02* +X9132085Y-14635460D01* +X9132085Y-14654508D02* +X9141609Y-14644984D01* +X9141609Y-14644984D02* +X9160656Y-14635460D01* +X9160656Y-14635460D02* +X9189228Y-14635460D01* +X9189228Y-14635460D02* +X9208275Y-14644984D01* +X9208275Y-14644984D02* +X9217799Y-14664032D01* +X9217799Y-14664032D02* +X9217799Y-14768794D01* +X9217799Y-14664032D02* +X9227323Y-14644984D01* +X9227323Y-14644984D02* +X9246370Y-14635460D01* +X9246370Y-14635460D02* +X9274942Y-14635460D01* +X9274942Y-14635460D02* +X9293990Y-14644984D01* +X9293990Y-14644984D02* +X9303513Y-14664032D01* +X9303513Y-14664032D02* +X9303513Y-14768794D01* +X9398751Y-14768794D02* +X9398751Y-14635460D01* +X9398751Y-14654508D02* +X9408275Y-14644984D01* +X9408275Y-14644984D02* +X9427323Y-14635460D01* +X9427323Y-14635460D02* +X9455894Y-14635460D01* +X9455894Y-14635460D02* +X9474942Y-14644984D01* +X9474942Y-14644984D02* +X9484466Y-14664032D01* +X9484466Y-14664032D02* +X9484466Y-14768794D01* +X9484466Y-14664032D02* +X9493990Y-14644984D01* +X9493990Y-14644984D02* +X9513037Y-14635460D01* +X9513037Y-14635460D02* +X9541609Y-14635460D01* +X9541609Y-14635460D02* +X9560656Y-14644984D01* +X9560656Y-14644984D02* +X9570180Y-14664032D01* +X9570180Y-14664032D02* +X9570180Y-14768794D01* +X9960656Y-14559270D02* +X9789228Y-14816413D01* +X10217799Y-14568794D02* +X10236847Y-14568794D01* +X10236847Y-14568794D02* +X10255894Y-14578318D01* +X10255894Y-14578318D02* +X10265418Y-14587841D01* +X10265418Y-14587841D02* +X10274942Y-14606889D01* +X10274942Y-14606889D02* +X10284466Y-14644984D01* +X10284466Y-14644984D02* +X10284466Y-14692603D01* +X10284466Y-14692603D02* +X10274942Y-14730698D01* +X10274942Y-14730698D02* +X10265418Y-14749746D01* +X10265418Y-14749746D02* +X10255894Y-14759270D01* +X10255894Y-14759270D02* +X10236847Y-14768794D01* +X10236847Y-14768794D02* +X10217799Y-14768794D01* +X10217799Y-14768794D02* +X10198752Y-14759270D01* +X10198752Y-14759270D02* +X10189228Y-14749746D01* +X10189228Y-14749746D02* +X10179704Y-14730698D01* +X10179704Y-14730698D02* +X10170180Y-14692603D01* +X10170180Y-14692603D02* +X10170180Y-14644984D01* +X10170180Y-14644984D02* +X10179704Y-14606889D01* +X10179704Y-14606889D02* +X10189228Y-14587841D01* +X10189228Y-14587841D02* +X10198752Y-14578318D01* +X10198752Y-14578318D02* +X10217799Y-14568794D01* +X10370180Y-14749746D02* +X10379704Y-14759270D01* +X10379704Y-14759270D02* +X10370180Y-14768794D01* +X10370180Y-14768794D02* +X10360656Y-14759270D01* +X10360656Y-14759270D02* +X10370180Y-14749746D01* +X10370180Y-14749746D02* +X10370180Y-14768794D01* +X10570180Y-14768794D02* +X10455894Y-14768794D01* +X10513037Y-14768794D02* +X10513037Y-14568794D01* +X10513037Y-14568794D02* +X10493990Y-14597365D01* +X10493990Y-14597365D02* +X10474942Y-14616413D01* +X10474942Y-14616413D02* +X10455894Y-14625937D01* +X10646371Y-14587841D02* +X10655894Y-14578318D01* +X10655894Y-14578318D02* +X10674942Y-14568794D01* +X10674942Y-14568794D02* +X10722561Y-14568794D01* +X10722561Y-14568794D02* +X10741609Y-14578318D01* +X10741609Y-14578318D02* +X10751133Y-14587841D01* +X10751133Y-14587841D02* +X10760656Y-14606889D01* +X10760656Y-14606889D02* +X10760656Y-14625937D01* +X10760656Y-14625937D02* +X10751133Y-14654508D01* +X10751133Y-14654508D02* +X10636847Y-14768794D01* +X10636847Y-14768794D02* +X10760656Y-14768794D01* +X10932085Y-14568794D02* +X10893990Y-14568794D01* +X10893990Y-14568794D02* +X10874942Y-14578318D01* +X10874942Y-14578318D02* +X10865418Y-14587841D01* +X10865418Y-14587841D02* +X10846371Y-14616413D01* +X10846371Y-14616413D02* +X10836847Y-14654508D01* +X10836847Y-14654508D02* +X10836847Y-14730698D01* +X10836847Y-14730698D02* +X10846371Y-14749746D01* +X10846371Y-14749746D02* +X10855894Y-14759270D01* +X10855894Y-14759270D02* +X10874942Y-14768794D01* +X10874942Y-14768794D02* +X10913037Y-14768794D01* +X10913037Y-14768794D02* +X10932085Y-14759270D01* +X10932085Y-14759270D02* +X10941609Y-14749746D01* +X10941609Y-14749746D02* +X10951133Y-14730698D01* +X10951133Y-14730698D02* +X10951133Y-14683079D01* +X10951133Y-14683079D02* +X10941609Y-14664032D01* +X10941609Y-14664032D02* +X10932085Y-14654508D01* +X10932085Y-14654508D02* +X10913037Y-14644984D01* +X10913037Y-14644984D02* +X10874942Y-14644984D01* +X10874942Y-14644984D02* +X10855894Y-14654508D01* +X10855894Y-14654508D02* +X10846371Y-14664032D01* +X10846371Y-14664032D02* +X10836847Y-14683079D01* +X11074942Y-14568794D02* +X11093990Y-14568794D01* +X11093990Y-14568794D02* +X11113037Y-14578318D01* +X11113037Y-14578318D02* +X11122561Y-14587841D01* +X11122561Y-14587841D02* +X11132085Y-14606889D01* +X11132085Y-14606889D02* +X11141609Y-14644984D01* +X11141609Y-14644984D02* +X11141609Y-14692603D01* +X11141609Y-14692603D02* +X11132085Y-14730698D01* +X11132085Y-14730698D02* +X11122561Y-14749746D01* +X11122561Y-14749746D02* +X11113037Y-14759270D01* +X11113037Y-14759270D02* +X11093990Y-14768794D01* +X11093990Y-14768794D02* +X11074942Y-14768794D01* +X11074942Y-14768794D02* +X11055894Y-14759270D01* +X11055894Y-14759270D02* +X11046371Y-14749746D01* +X11046371Y-14749746D02* +X11036847Y-14730698D01* +X11036847Y-14730698D02* +X11027323Y-14692603D01* +X11027323Y-14692603D02* +X11027323Y-14644984D01* +X11027323Y-14644984D02* +X11036847Y-14606889D01* +X11036847Y-14606889D02* +X11046371Y-14587841D01* +X11046371Y-14587841D02* +X11055894Y-14578318D01* +X11055894Y-14578318D02* +X11074942Y-14568794D01* +X11217799Y-14568794D02* +X11217799Y-14606889D01* +X11293990Y-14568794D02* +X11293990Y-14606889D01* +X11589228Y-14844984D02* +X11579704Y-14835460D01* +X11579704Y-14835460D02* +X11560656Y-14806889D01* +X11560656Y-14806889D02* +X11551133Y-14787841D01* +X11551133Y-14787841D02* +X11541609Y-14759270D01* +X11541609Y-14759270D02* +X11532085Y-14711651D01* +X11532085Y-14711651D02* +X11532085Y-14673556D01* +X11532085Y-14673556D02* +X11541609Y-14625937D01* +X11541609Y-14625937D02* +X11551133Y-14597365D01* +X11551133Y-14597365D02* +X11560656Y-14578318D01* +X11560656Y-14578318D02* +X11579704Y-14549746D01* +X11579704Y-14549746D02* +X11589228Y-14540222D01* +X11751133Y-14635460D02* +X11751133Y-14768794D01* +X11703513Y-14559270D02* +X11655894Y-14702127D01* +X11655894Y-14702127D02* +X11779704Y-14702127D01* +X12008275Y-14768794D02* +X12008275Y-14568794D01* +X12093990Y-14768794D02* +X12093990Y-14664032D01* +X12093990Y-14664032D02* +X12084466Y-14644984D01* +X12084466Y-14644984D02* +X12065418Y-14635460D01* +X12065418Y-14635460D02* +X12036847Y-14635460D01* +X12036847Y-14635460D02* +X12017799Y-14644984D01* +X12017799Y-14644984D02* +X12008275Y-14654508D01* +X12217799Y-14768794D02* +X12198752Y-14759270D01* +X12198752Y-14759270D02* +X12189228Y-14749746D01* +X12189228Y-14749746D02* +X12179704Y-14730698D01* +X12179704Y-14730698D02* +X12179704Y-14673556D01* +X12179704Y-14673556D02* +X12189228Y-14654508D01* +X12189228Y-14654508D02* +X12198752Y-14644984D01* +X12198752Y-14644984D02* +X12217799Y-14635460D01* +X12217799Y-14635460D02* +X12246371Y-14635460D01* +X12246371Y-14635460D02* +X12265418Y-14644984D01* +X12265418Y-14644984D02* +X12274942Y-14654508D01* +X12274942Y-14654508D02* +X12284466Y-14673556D01* +X12284466Y-14673556D02* +X12284466Y-14730698D01* +X12284466Y-14730698D02* +X12274942Y-14749746D01* +X12274942Y-14749746D02* +X12265418Y-14759270D01* +X12265418Y-14759270D02* +X12246371Y-14768794D01* +X12246371Y-14768794D02* +X12217799Y-14768794D01* +X12398752Y-14768794D02* +X12379704Y-14759270D01* +X12379704Y-14759270D02* +X12370180Y-14740222D01* +X12370180Y-14740222D02* +X12370180Y-14568794D01* +X12551133Y-14759270D02* +X12532085Y-14768794D01* +X12532085Y-14768794D02* +X12493990Y-14768794D01* +X12493990Y-14768794D02* +X12474942Y-14759270D01* +X12474942Y-14759270D02* +X12465418Y-14740222D01* +X12465418Y-14740222D02* +X12465418Y-14664032D01* +X12465418Y-14664032D02* +X12474942Y-14644984D01* +X12474942Y-14644984D02* +X12493990Y-14635460D01* +X12493990Y-14635460D02* +X12532085Y-14635460D01* +X12532085Y-14635460D02* +X12551133Y-14644984D01* +X12551133Y-14644984D02* +X12560656Y-14664032D01* +X12560656Y-14664032D02* +X12560656Y-14683079D01* +X12560656Y-14683079D02* +X12465418Y-14702127D01* +X12636847Y-14759270D02* +X12655895Y-14768794D01* +X12655895Y-14768794D02* +X12693990Y-14768794D01* +X12693990Y-14768794D02* +X12713037Y-14759270D01* +X12713037Y-14759270D02* +X12722561Y-14740222D01* +X12722561Y-14740222D02* +X12722561Y-14730698D01* +X12722561Y-14730698D02* +X12713037Y-14711651D01* +X12713037Y-14711651D02* +X12693990Y-14702127D01* +X12693990Y-14702127D02* +X12665418Y-14702127D01* +X12665418Y-14702127D02* +X12646371Y-14692603D01* +X12646371Y-14692603D02* +X12636847Y-14673556D01* +X12636847Y-14673556D02* +X12636847Y-14664032D01* +X12636847Y-14664032D02* +X12646371Y-14644984D01* +X12646371Y-14644984D02* +X12665418Y-14635460D01* +X12665418Y-14635460D02* +X12693990Y-14635460D01* +X12693990Y-14635460D02* +X12713037Y-14644984D01* +X12789228Y-14844984D02* +X12798752Y-14835460D01* +X12798752Y-14835460D02* +X12817799Y-14806889D01* +X12817799Y-14806889D02* +X12827323Y-14787841D01* +X12827323Y-14787841D02* +X12836847Y-14759270D01* +X12836847Y-14759270D02* +X12846371Y-14711651D01* +X12846371Y-14711651D02* +X12846371Y-14673556D01* +X12846371Y-14673556D02* +X12836847Y-14625937D01* +X12836847Y-14625937D02* +X12827323Y-14597365D01* +X12827323Y-14597365D02* +X12817799Y-14578318D01* +X12817799Y-14578318D02* +X12798752Y-14549746D01* +X12798752Y-14549746D02* +X12789228Y-14540222D01* +X13151133Y-14844984D02* +X13141609Y-14835460D01* +X13141609Y-14835460D02* +X13122561Y-14806889D01* +X13122561Y-14806889D02* +X13113037Y-14787841D01* +X13113037Y-14787841D02* +X13103514Y-14759270D01* +X13103514Y-14759270D02* +X13093990Y-14711651D01* +X13093990Y-14711651D02* +X13093990Y-14673556D01* +X13093990Y-14673556D02* +X13103514Y-14625937D01* +X13103514Y-14625937D02* +X13113037Y-14597365D01* +X13113037Y-14597365D02* +X13122561Y-14578318D01* +X13122561Y-14578318D02* +X13141609Y-14549746D01* +X13141609Y-14549746D02* +X13151133Y-14540222D01* +X13227323Y-14635460D02* +X13227323Y-14768794D01* +X13227323Y-14654508D02* +X13236847Y-14644984D01* +X13236847Y-14644984D02* +X13255895Y-14635460D01* +X13255895Y-14635460D02* +X13284466Y-14635460D01* +X13284466Y-14635460D02* +X13303514Y-14644984D01* +X13303514Y-14644984D02* +X13313037Y-14664032D01* +X13313037Y-14664032D02* +X13313037Y-14768794D01* +X13436847Y-14768794D02* +X13417799Y-14759270D01* +X13417799Y-14759270D02* +X13408276Y-14749746D01* +X13408276Y-14749746D02* +X13398752Y-14730698D01* +X13398752Y-14730698D02* +X13398752Y-14673556D01* +X13398752Y-14673556D02* +X13408276Y-14654508D01* +X13408276Y-14654508D02* +X13417799Y-14644984D01* +X13417799Y-14644984D02* +X13436847Y-14635460D01* +X13436847Y-14635460D02* +X13465418Y-14635460D01* +X13465418Y-14635460D02* +X13484466Y-14644984D01* +X13484466Y-14644984D02* +X13493990Y-14654508D01* +X13493990Y-14654508D02* +X13503514Y-14673556D01* +X13503514Y-14673556D02* +X13503514Y-14730698D01* +X13503514Y-14730698D02* +X13493990Y-14749746D01* +X13493990Y-14749746D02* +X13484466Y-14759270D01* +X13484466Y-14759270D02* +X13465418Y-14768794D01* +X13465418Y-14768794D02* +X13436847Y-14768794D01* +X13560657Y-14635460D02* +X13636847Y-14635460D01* +X13589228Y-14568794D02* +X13589228Y-14740222D01* +X13589228Y-14740222D02* +X13598752Y-14759270D01* +X13598752Y-14759270D02* +X13617799Y-14768794D01* +X13617799Y-14768794D02* +X13636847Y-14768794D01* +X13855895Y-14635460D02* +X13855895Y-14835460D01* +X13855895Y-14644984D02* +X13874942Y-14635460D01* +X13874942Y-14635460D02* +X13913038Y-14635460D01* +X13913038Y-14635460D02* +X13932085Y-14644984D01* +X13932085Y-14644984D02* +X13941609Y-14654508D01* +X13941609Y-14654508D02* +X13951133Y-14673556D01* +X13951133Y-14673556D02* +X13951133Y-14730698D01* +X13951133Y-14730698D02* +X13941609Y-14749746D01* +X13941609Y-14749746D02* +X13932085Y-14759270D01* +X13932085Y-14759270D02* +X13913038Y-14768794D01* +X13913038Y-14768794D02* +X13874942Y-14768794D01* +X13874942Y-14768794D02* +X13855895Y-14759270D01* +X14065418Y-14768794D02* +X14046371Y-14759270D01* +X14046371Y-14759270D02* +X14036847Y-14740222D01* +X14036847Y-14740222D02* +X14036847Y-14568794D01* +X14227323Y-14768794D02* +X14227323Y-14664032D01* +X14227323Y-14664032D02* +X14217799Y-14644984D01* +X14217799Y-14644984D02* +X14198752Y-14635460D01* +X14198752Y-14635460D02* +X14160657Y-14635460D01* +X14160657Y-14635460D02* +X14141609Y-14644984D01* +X14227323Y-14759270D02* +X14208276Y-14768794D01* +X14208276Y-14768794D02* +X14160657Y-14768794D01* +X14160657Y-14768794D02* +X14141609Y-14759270D01* +X14141609Y-14759270D02* +X14132085Y-14740222D01* +X14132085Y-14740222D02* +X14132085Y-14721175D01* +X14132085Y-14721175D02* +X14141609Y-14702127D01* +X14141609Y-14702127D02* +X14160657Y-14692603D01* +X14160657Y-14692603D02* +X14208276Y-14692603D01* +X14208276Y-14692603D02* +X14227323Y-14683079D01* +X14293990Y-14635460D02* +X14370180Y-14635460D01* +X14322561Y-14568794D02* +X14322561Y-14740222D01* +X14322561Y-14740222D02* +X14332085Y-14759270D01* +X14332085Y-14759270D02* +X14351133Y-14768794D01* +X14351133Y-14768794D02* +X14370180Y-14768794D01* +X14513038Y-14759270D02* +X14493990Y-14768794D01* +X14493990Y-14768794D02* +X14455895Y-14768794D01* +X14455895Y-14768794D02* +X14436847Y-14759270D01* +X14436847Y-14759270D02* +X14427323Y-14740222D01* +X14427323Y-14740222D02* +X14427323Y-14664032D01* +X14427323Y-14664032D02* +X14436847Y-14644984D01* +X14436847Y-14644984D02* +X14455895Y-14635460D01* +X14455895Y-14635460D02* +X14493990Y-14635460D01* +X14493990Y-14635460D02* +X14513038Y-14644984D01* +X14513038Y-14644984D02* +X14522561Y-14664032D01* +X14522561Y-14664032D02* +X14522561Y-14683079D01* +X14522561Y-14683079D02* +X14427323Y-14702127D01* +X14693990Y-14768794D02* +X14693990Y-14568794D01* +X14693990Y-14759270D02* +X14674942Y-14768794D01* +X14674942Y-14768794D02* +X14636847Y-14768794D01* +X14636847Y-14768794D02* +X14617799Y-14759270D01* +X14617799Y-14759270D02* +X14608276Y-14749746D01* +X14608276Y-14749746D02* +X14598752Y-14730698D01* +X14598752Y-14730698D02* +X14598752Y-14673556D01* +X14598752Y-14673556D02* +X14608276Y-14654508D01* +X14608276Y-14654508D02* +X14617799Y-14644984D01* +X14617799Y-14644984D02* +X14636847Y-14635460D01* +X14636847Y-14635460D02* +X14674942Y-14635460D01* +X14674942Y-14635460D02* +X14693990Y-14644984D01* +X14770180Y-14844984D02* +X14779704Y-14835460D01* +X14779704Y-14835460D02* +X14798752Y-14806889D01* +X14798752Y-14806889D02* +X14808276Y-14787841D01* +X14808276Y-14787841D02* +X14817799Y-14759270D01* +X14817799Y-14759270D02* +X14827323Y-14711651D01* +X14827323Y-14711651D02* +X14827323Y-14673556D01* +X14827323Y-14673556D02* +X14817799Y-14625937D01* +X14817799Y-14625937D02* +X14808276Y-14597365D01* +X14808276Y-14597365D02* +X14798752Y-14578318D01* +X14798752Y-14578318D02* +X14779704Y-14549746D01* +X14779704Y-14549746D02* +X14770180Y-14540222D01* +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-NPTH.drl b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-NPTH.drl new file mode 100644 index 0000000..fb1d1ca --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-NPTH.drl @@ -0,0 +1,19 @@ +M48 +; DRILL file KiCad 10.0.4 date 2026-07-06T14:39:54 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2026-07-06T14:39:54-06:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.4 +; #@! TF.FileFunction,NonPlated,1,4,NPTH +FMAT,2 +METRIC +; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill +T1C3.200 +% +G90 +G05 +T1 +X85.192Y-45.323 +X85.192Y-135.323 +X211.192Y-45.323 +X211.192Y-135.323 +M30 diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-PTH-drl_map.gbr b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-PTH-drl_map.gbr new file mode 100644 index 0000000..2678167 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-PTH-drl_map.gbr @@ -0,0 +1,7644 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,10.0.4*% +%TF.CreationDate,2026-07-06T14:39:54-06:00*% +%TF.ProjectId,hbox-watchdog-v3-PROD,68626f78-2d77-4617-9463-68646f672d76,1.0*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Drillmap*% +%TF.FilePolarity,Positive*% +%FSLAX45Y45*% +G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 10.0.4) date 2026-07-06 14:39:54* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.100000*% +%ADD11C,0.200000*% +%ADD12C,0.110000*% +%ADD13C,0.130000*% +G04 APERTURE END LIST* +D10* +X8019165Y-4032310D02* +X21519165Y-4032310D01* +X8019165Y-14032310D02* +X8019165Y-4032310D01* +X21519165Y-4032310D02* +X21519165Y-14032310D01* +X21519165Y-14032310D02* +X8019165Y-14032310D01* +D11* +D10* +X8149165Y-4162310D02* +X8179165Y-4192310D01* +X8179165Y-4162310D02* +X8149165Y-4192310D01* +X8149165Y-4862310D02* +X8179165Y-4892310D01* +X8179165Y-4862310D02* +X8149165Y-4892310D01* +X8149165Y-5562310D02* +X8179165Y-5592310D01* +X8179165Y-5562310D02* +X8149165Y-5592310D01* +X8149165Y-6262310D02* +X8179165Y-6292310D01* +X8179165Y-6262310D02* +X8149165Y-6292310D01* +X8149165Y-6962310D02* +X8179165Y-6992310D01* +X8179165Y-6962310D02* +X8149165Y-6992310D01* +X8149165Y-7662310D02* +X8179165Y-7692310D01* +X8179165Y-7662310D02* +X8149165Y-7692310D01* +X8149165Y-8362310D02* +X8179165Y-8392310D01* +X8179165Y-8362310D02* +X8149165Y-8392310D01* +X8149165Y-9062310D02* +X8179165Y-9092310D01* +X8179165Y-9062310D02* +X8149165Y-9092310D01* +X8149165Y-9762310D02* +X8179165Y-9792310D01* +X8179165Y-9762310D02* +X8149165Y-9792310D01* +X8149165Y-10462310D02* +X8179165Y-10492310D01* +X8179165Y-10462310D02* +X8149165Y-10492310D01* +X8149165Y-11162310D02* +X8179165Y-11192310D01* +X8179165Y-11162310D02* +X8149165Y-11192310D01* +X8149165Y-11862310D02* +X8179165Y-11892310D01* +X8179165Y-11862310D02* +X8149165Y-11892310D01* +X8149165Y-12562310D02* +X8179165Y-12592310D01* +X8179165Y-12562310D02* +X8149165Y-12592310D01* +X8149165Y-13262310D02* +X8179165Y-13292310D01* +X8179165Y-13262310D02* +X8149165Y-13292310D01* +X8745000Y-5860000D02* +X8775000Y-5890000D01* +X8775000Y-5860000D02* +X8745000Y-5890000D01* +X8849165Y-4162310D02* +X8879165Y-4192310D01* +X8879165Y-4162310D02* +X8849165Y-4192310D01* +X8849165Y-4862310D02* +X8879165Y-4892310D01* +X8879165Y-4862310D02* +X8849165Y-4892310D01* +X8849165Y-6962310D02* +X8879165Y-6992310D01* +X8879165Y-6962310D02* +X8849165Y-6992310D01* +X8849165Y-7662310D02* +X8879165Y-7692310D01* +X8879165Y-7662310D02* +X8849165Y-7692310D01* +X8849165Y-8362310D02* +X8879165Y-8392310D01* +X8879165Y-8362310D02* +X8849165Y-8392310D01* +X8849165Y-9062310D02* +X8879165Y-9092310D01* +X8879165Y-9062310D02* +X8849165Y-9092310D01* +X8849165Y-9762310D02* +X8879165Y-9792310D01* +X8879165Y-9762310D02* +X8849165Y-9792310D01* +X8849165Y-10462310D02* +X8879165Y-10492310D01* +X8879165Y-10462310D02* +X8849165Y-10492310D01* +X8849165Y-11162310D02* +X8879165Y-11192310D01* +X8879165Y-11162310D02* +X8849165Y-11192310D01* +X8849165Y-11862310D02* +X8879165Y-11892310D01* +X8879165Y-11862310D02* +X8849165Y-11892310D01* +X8849165Y-12562310D02* +X8879165Y-12592310D01* +X8879165Y-12562310D02* +X8849165Y-12592310D01* +X8849165Y-13262310D02* +X8879165Y-13292310D01* +X8879165Y-13262310D02* +X8849165Y-13292310D01* +X9092055Y-6188840D02* +X9122055Y-6218840D01* +X9122055Y-6188840D02* +X9092055Y-6218840D01* +X9094675Y-10390950D02* +X9124675Y-10420950D01* +X9124675Y-10390950D02* +X9094675Y-10420950D01* +X9194665Y-10893040D02* +X9224665Y-10923040D01* +X9224665Y-10893040D02* +X9194665Y-10923040D01* +X9204855Y-6755090D02* +X9234855Y-6785090D01* +X9234855Y-6755090D02* +X9204855Y-6785090D01* +X9320425Y-10943490D02* +X9350425Y-10973490D01* +X9350425Y-10943490D02* +X9320425Y-10973490D01* +X9321665Y-9318810D02* +X9351665Y-9348810D01* +X9351665Y-9318810D02* +X9321665Y-9348810D01* +X9370000Y-6915000D02* +X9400000Y-6945000D01* +X9400000Y-6915000D02* +X9370000Y-6945000D01* +X9399915Y-8425160D02* +X9429915Y-8455160D01* +X9429915Y-8425160D02* +X9399915Y-8455160D01* +X9408825Y-7026260D02* +X9438825Y-7056260D01* +X9438825Y-7026260D02* +X9408825Y-7056260D01* +X9443435Y-4617310D02* +X9473435Y-4647310D01* +X9473435Y-4617310D02* +X9443435Y-4647310D01* +X9485000Y-11440000D02* +X9515000Y-11470000D01* +X9515000Y-11440000D02* +X9485000Y-11470000D01* +X9549165Y-4162310D02* +X9579165Y-4192310D01* +X9579165Y-4162310D02* +X9549165Y-4192310D01* +X9549165Y-7662310D02* +X9579165Y-7692310D01* +X9579165Y-7662310D02* +X9549165Y-7692310D01* +X9549165Y-9062310D02* +X9579165Y-9092310D01* +X9579165Y-9062310D02* +X9549165Y-9092310D01* +X9549165Y-10462310D02* +X9579165Y-10492310D01* +X9579165Y-10462310D02* +X9549165Y-10492310D01* +X9549165Y-11162310D02* +X9579165Y-11192310D01* +X9579165Y-11162310D02* +X9549165Y-11192310D01* +X9549165Y-11862310D02* +X9579165Y-11892310D01* +X9579165Y-11862310D02* +X9549165Y-11892310D01* +X9549165Y-12562310D02* +X9579165Y-12592310D01* +X9579165Y-12562310D02* +X9549165Y-12592310D01* +X9549165Y-13262310D02* +X9579165Y-13292310D01* +X9579165Y-13262310D02* +X9549165Y-13292310D01* +X9633105Y-7201660D02* +X9663105Y-7231660D01* +X9663105Y-7201660D02* +X9633105Y-7231660D01* +X9648265Y-7852110D02* +X9678265Y-7882110D01* +X9678265Y-7852110D02* +X9648265Y-7882110D01* +X9770165Y-8265310D02* +X9800165Y-8295310D01* +X9800165Y-8265310D02* +X9770165Y-8295310D01* +X9793265Y-7396330D02* +X9823265Y-7426330D01* +X9823265Y-7396330D02* +X9793265Y-7426330D01* +X9800815Y-7791930D02* +X9830815Y-7821930D01* +X9830815Y-7791930D02* +X9800815Y-7821930D01* +X9822385Y-10106740D02* +X9852385Y-10136740D01* +X9852385Y-10106740D02* +X9822385Y-10136740D01* +X9897605Y-10217310D02* +X9927605Y-10247310D01* +X9927605Y-10217310D02* +X9897605Y-10247310D01* +X9915000Y-11455000D02* +X9945000Y-11485000D01* +X9945000Y-11455000D02* +X9915000Y-11485000D01* +X9932345Y-10330070D02* +X9962345Y-10360070D01* +X9962345Y-10330070D02* +X9932345Y-10360070D01* +X9933075Y-9320380D02* +X9963075Y-9350380D01* +X9963075Y-9320380D02* +X9933075Y-9350380D01* +X9963985Y-10727610D02* +X9993985Y-10757610D01* +X9993985Y-10727610D02* +X9963985Y-10757610D01* +X9986665Y-9417310D02* +X10016665Y-9447310D01* +X10016665Y-9417310D02* +X9986665Y-9447310D01* +X10021115Y-8417820D02* +X10051115Y-8447820D01* +X10051115Y-8417820D02* +X10021115Y-8447820D01* +X10092025Y-11493960D02* +X10122025Y-11523960D01* +X10122025Y-11493960D02* +X10092025Y-11523960D01* +X10136575Y-7703010D02* +X10166575Y-7733010D01* +X10166575Y-7703010D02* +X10136575Y-7733010D01* +X10150000Y-8535000D02* +X10180000Y-8565000D01* +X10180000Y-8535000D02* +X10150000Y-8565000D01* +X10182645Y-7533530D02* +X10212645Y-7563530D01* +X10212645Y-7533530D02* +X10182645Y-7563530D01* +X10243995Y-10006570D02* +X10273995Y-10036570D01* +X10273995Y-10006570D02* +X10243995Y-10036570D01* +X10245000Y-9900000D02* +X10275000Y-9930000D01* +X10275000Y-9900000D02* +X10245000Y-9930000D01* +X10249165Y-4862310D02* +X10279165Y-4892310D01* +X10279165Y-4862310D02* +X10249165Y-4892310D01* +X10249165Y-11862310D02* +X10279165Y-11892310D01* +X10279165Y-11862310D02* +X10249165Y-11892310D01* +X10249165Y-12562310D02* +X10279165Y-12592310D01* +X10279165Y-12562310D02* +X10249165Y-12592310D01* +X10249165Y-13262310D02* +X10279165Y-13292310D01* +X10279165Y-13262310D02* +X10249165Y-13292310D01* +X10272605Y-8057280D02* +X10302605Y-8087280D01* +X10302605Y-8057280D02* +X10272605Y-8087280D01* +X10277115Y-9531220D02* +X10307115Y-9561220D01* +X10307115Y-9531220D02* +X10277115Y-9561220D01* +X10317775Y-8407250D02* +X10347775Y-8437250D01* +X10347775Y-8407250D02* +X10317775Y-8437250D01* +X10419535Y-7101460D02* +X10449535Y-7131460D01* +X10449535Y-7101460D02* +X10419535Y-7131460D01* +X10533095Y-10618670D02* +X10563095Y-10648670D01* +X10563095Y-10618670D02* +X10533095Y-10648670D01* +X10635375Y-9708630D02* +X10665375Y-9738630D01* +X10665375Y-9708630D02* +X10635375Y-9738630D01* +X10668195Y-11143280D02* +X10698195Y-11173280D01* +X10698195Y-11143280D02* +X10668195Y-11173280D01* +X10750445Y-8215890D02* +X10780445Y-8245890D01* +X10780445Y-8215890D02* +X10750445Y-8245890D01* +X10852435Y-9622720D02* +X10882435Y-9652720D01* +X10882435Y-9622720D02* +X10852435Y-9652720D01* +X10949165Y-6262310D02* +X10979165Y-6292310D01* +X10979165Y-6262310D02* +X10949165Y-6292310D01* +X10949165Y-7662310D02* +X10979165Y-7692310D01* +X10979165Y-7662310D02* +X10949165Y-7692310D01* +X10949165Y-9062310D02* +X10979165Y-9092310D01* +X10979165Y-9062310D02* +X10949165Y-9092310D01* +X10949165Y-9762310D02* +X10979165Y-9792310D01* +X10979165Y-9762310D02* +X10949165Y-9792310D01* +X10949165Y-11862310D02* +X10979165Y-11892310D01* +X10979165Y-11862310D02* +X10949165Y-11892310D01* +X10949165Y-12562310D02* +X10979165Y-12592310D01* +X10979165Y-12562310D02* +X10949165Y-12592310D01* +X10949165Y-13262310D02* +X10979165Y-13292310D01* +X10979165Y-13262310D02* +X10949165Y-13292310D01* +X11062725Y-11138910D02* +X11092725Y-11168910D01* +X11092725Y-11138910D02* +X11062725Y-11168910D01* +X11081935Y-11295840D02* +X11111935Y-11325840D01* +X11111935Y-11295840D02* +X11081935Y-11325840D01* +X11290675Y-9122370D02* +X11320675Y-9152370D01* +X11320675Y-9122370D02* +X11290675Y-9152370D01* +X11304165Y-10589450D02* +X11334165Y-10619450D01* +X11334165Y-10589450D02* +X11304165Y-10619450D01* +X11336905Y-9428040D02* +X11366905Y-9458040D01* +X11366905Y-9428040D02* +X11336905Y-9458040D01* +X11375185Y-10296330D02* +X11405185Y-10326330D01* +X11405185Y-10296330D02* +X11375185Y-10326330D01* +X11449655Y-9405220D02* +X11479655Y-9435220D01* +X11479655Y-9405220D02* +X11449655Y-9435220D01* +X11460815Y-4822980D02* +X11490815Y-4852980D01* +X11490815Y-4822980D02* +X11460815Y-4852980D01* +X11559345Y-10524580D02* +X11589345Y-10554580D01* +X11589345Y-10524580D02* +X11559345Y-10554580D01* +X11649165Y-4862310D02* +X11679165Y-4892310D01* +X11679165Y-4862310D02* +X11649165Y-4892310D01* +X11649165Y-6262310D02* +X11679165Y-6292310D01* +X11679165Y-6262310D02* +X11649165Y-6292310D01* +X11649165Y-7662310D02* +X11679165Y-7692310D01* +X11679165Y-7662310D02* +X11649165Y-7692310D01* +X11649165Y-9762310D02* +X11679165Y-9792310D01* +X11679165Y-9762310D02* +X11649165Y-9792310D01* +X11649165Y-11862310D02* +X11679165Y-11892310D01* +X11679165Y-11862310D02* +X11649165Y-11892310D01* +X11649165Y-12562310D02* +X11679165Y-12592310D01* +X11679165Y-12562310D02* +X11649165Y-12592310D01* +X11649165Y-13262310D02* +X11679165Y-13292310D01* +X11679165Y-13262310D02* +X11649165Y-13292310D01* +X11668105Y-9428620D02* +X11698105Y-9458620D01* +X11698105Y-9428620D02* +X11668105Y-9458620D01* +X11668165Y-10932850D02* +X11698165Y-10962850D01* +X11698165Y-10932850D02* +X11668165Y-10962850D01* +X11780165Y-9465310D02* +X11810165Y-9495310D01* +X11810165Y-9465310D02* +X11780165Y-9495310D01* +X11787425Y-9165810D02* +X11817425Y-9195810D01* +X11817425Y-9165810D02* +X11787425Y-9195810D01* +X12055000Y-6750000D02* +X12085000Y-6780000D01* +X12085000Y-6750000D02* +X12055000Y-6780000D01* +X12185295Y-9760170D02* +X12215295Y-9790170D01* +X12215295Y-9760170D02* +X12185295Y-9790170D01* +X12323255Y-9639840D02* +X12353255Y-9669840D01* +X12353255Y-9639840D02* +X12323255Y-9669840D01* +X12349165Y-4862310D02* +X12379165Y-4892310D01* +X12379165Y-4862310D02* +X12349165Y-4892310D01* +X12349165Y-6962310D02* +X12379165Y-6992310D01* +X12379165Y-6962310D02* +X12349165Y-6992310D01* +X12349165Y-7662310D02* +X12379165Y-7692310D01* +X12379165Y-7662310D02* +X12349165Y-7692310D01* +X12349165Y-8362310D02* +X12379165Y-8392310D01* +X12379165Y-8362310D02* +X12349165Y-8392310D01* +X12349165Y-12562310D02* +X12379165Y-12592310D01* +X12379165Y-12562310D02* +X12349165Y-12592310D01* +X12349165Y-13262310D02* +X12379165Y-13292310D01* +X12379165Y-13262310D02* +X12349165Y-13292310D01* +X12390445Y-9117770D02* +X12420445Y-9147770D01* +X12420445Y-9117770D02* +X12390445Y-9147770D01* +X12404295Y-5732480D02* +X12434295Y-5762480D01* +X12434295Y-5732480D02* +X12404295Y-5762480D01* +X12454165Y-9415310D02* +X12484165Y-9445310D01* +X12484165Y-9415310D02* +X12454165Y-9445310D01* +X12468165Y-9578310D02* +X12498165Y-9608310D01* +X12498165Y-9578310D02* +X12468165Y-9608310D01* +X12500165Y-9484310D02* +X12530165Y-9514310D01* +X12530165Y-9484310D02* +X12500165Y-9514310D01* +X12538165Y-9397310D02* +X12568165Y-9427310D01* +X12568165Y-9397310D02* +X12538165Y-9427310D01* +X12549925Y-9181440D02* +X12579925Y-9211440D01* +X12579925Y-9181440D02* +X12549925Y-9211440D01* +X12625000Y-9525000D02* +X12655000Y-9555000D01* +X12655000Y-9525000D02* +X12625000Y-9555000D01* +X12646505Y-11156480D02* +X12676505Y-11186480D01* +X12676505Y-11156480D02* +X12646505Y-11186480D01* +X12648415Y-11319900D02* +X12678415Y-11349900D01* +X12678415Y-11319900D02* +X12648415Y-11349900D01* +X12651455Y-9792940D02* +X12681455Y-9822940D01* +X12681455Y-9792940D02* +X12651455Y-9822940D01* +X12705000Y-11845000D02* +X12735000Y-11875000D01* +X12735000Y-11845000D02* +X12705000Y-11875000D01* +X12717135Y-9670360D02* +X12747135Y-9700360D01* +X12747135Y-9670360D02* +X12717135Y-9700360D01* +X12735735Y-9509840D02* +X12765735Y-9539840D01* +X12765735Y-9509840D02* +X12735735Y-9539840D01* +X12751555Y-9229150D02* +X12781555Y-9259150D01* +X12781555Y-9229150D02* +X12751555Y-9259150D01* +X12841945Y-9229150D02* +X12871945Y-9259150D01* +X12871945Y-9229150D02* +X12841945Y-9259150D01* +X12945315Y-9231000D02* +X12975315Y-9261000D01* +X12975315Y-9231000D02* +X12945315Y-9261000D01* +X13005000Y-9955000D02* +X13035000Y-9985000D01* +X13035000Y-9955000D02* +X13005000Y-9985000D01* +X13005000Y-10585000D02* +X13035000Y-10615000D01* +X13035000Y-10585000D02* +X13005000Y-10615000D01* +X13029705Y-9265770D02* +X13059705Y-9295770D01* +X13059705Y-9265770D02* +X13029705Y-9295770D01* +X13049165Y-6962310D02* +X13079165Y-6992310D01* +X13079165Y-6962310D02* +X13049165Y-6992310D01* +X13049165Y-7662310D02* +X13079165Y-7692310D01* +X13079165Y-7662310D02* +X13049165Y-7692310D01* +X13049165Y-11162310D02* +X13079165Y-11192310D01* +X13079165Y-11162310D02* +X13049165Y-11192310D01* +X13049165Y-13262310D02* +X13079165Y-13292310D01* +X13079165Y-13262310D02* +X13049165Y-13292310D01* +X13116935Y-8339270D02* +X13146935Y-8369270D01* +X13146935Y-8339270D02* +X13116935Y-8369270D01* +X13199165Y-11116820D02* +X13229165Y-11146820D01* +X13229165Y-11116820D02* +X13199165Y-11146820D01* +X13327955Y-10343600D02* +X13357955Y-10373600D01* +X13357955Y-10343600D02* +X13327955Y-10373600D01* +X13408965Y-9705040D02* +X13438965Y-9735040D01* +X13438965Y-9705040D02* +X13408965Y-9735040D01* +X13434175Y-9867000D02* +X13464175Y-9897000D01* +X13464175Y-9867000D02* +X13434175Y-9897000D01* +X13485000Y-9705000D02* +X13515000Y-9735000D01* +X13515000Y-9705000D02* +X13485000Y-9735000D01* +X13508155Y-9786340D02* +X13538155Y-9816340D01* +X13538155Y-9786340D02* +X13508155Y-9816340D01* +X13535000Y-6110000D02* +X13565000Y-6140000D01* +X13565000Y-6110000D02* +X13535000Y-6140000D01* +X13652575Y-9534450D02* +X13682575Y-9564450D01* +X13682575Y-9534450D02* +X13652575Y-9564450D01* +X13717345Y-8884150D02* +X13747345Y-8914150D01* +X13747345Y-8884150D02* +X13717345Y-8914150D01* +X13749165Y-4162310D02* +X13779165Y-4192310D01* +X13779165Y-4162310D02* +X13749165Y-4192310D01* +X13749165Y-4862310D02* +X13779165Y-4892310D01* +X13779165Y-4862310D02* +X13749165Y-4892310D01* +X13749165Y-11162310D02* +X13779165Y-11192310D01* +X13779165Y-11162310D02* +X13749165Y-11192310D01* +X13749165Y-13262310D02* +X13779165Y-13292310D01* +X13779165Y-13262310D02* +X13749165Y-13292310D01* +X13798555Y-9731620D02* +X13828555Y-9761620D01* +X13828555Y-9731620D02* +X13798555Y-9761620D01* +X13805000Y-9155000D02* +X13835000Y-9185000D01* +X13835000Y-9155000D02* +X13805000Y-9185000D01* +X14039295Y-9232980D02* +X14069295Y-9262980D01* +X14069295Y-9232980D02* +X14039295Y-9262980D01* +X14159275Y-9841950D02* +X14189275Y-9871950D01* +X14189275Y-9841950D02* +X14159275Y-9871950D01* +X14175000Y-13545000D02* +X14205000Y-13575000D01* +X14205000Y-13545000D02* +X14175000Y-13575000D01* +X14200000Y-6080000D02* +X14230000Y-6110000D01* +X14230000Y-6080000D02* +X14200000Y-6110000D01* +X14426095Y-9640970D02* +X14456095Y-9670970D01* +X14456095Y-9640970D02* +X14426095Y-9670970D01* +X14449165Y-4162310D02* +X14479165Y-4192310D01* +X14479165Y-4162310D02* +X14449165Y-4192310D01* +X14449165Y-4862310D02* +X14479165Y-4892310D01* +X14479165Y-4862310D02* +X14449165Y-4892310D01* +X14449165Y-11162310D02* +X14479165Y-11192310D01* +X14479165Y-11162310D02* +X14449165Y-11192310D01* +X14449165Y-11862310D02* +X14479165Y-11892310D01* +X14479165Y-11862310D02* +X14449165Y-11892310D01* +X14449165Y-13262310D02* +X14479165Y-13292310D01* +X14479165Y-13262310D02* +X14449165Y-13292310D01* +X14751125Y-6889400D02* +X14781125Y-6919400D01* +X14781125Y-6889400D02* +X14751125Y-6919400D01* +X15149165Y-4162310D02* +X15179165Y-4192310D01* +X15179165Y-4162310D02* +X15149165Y-4192310D01* +X15149165Y-10462310D02* +X15179165Y-10492310D01* +X15179165Y-10462310D02* +X15149165Y-10492310D01* +X15149165Y-11862310D02* +X15179165Y-11892310D01* +X15179165Y-11862310D02* +X15149165Y-11892310D01* +X15149165Y-12562310D02* +X15179165Y-12592310D01* +X15179165Y-12562310D02* +X15149165Y-12592310D01* +X15149165Y-13262310D02* +X15179165Y-13292310D01* +X15179165Y-13262310D02* +X15149165Y-13292310D01* +X15206695Y-5140050D02* +X15236695Y-5170050D01* +X15236695Y-5140050D02* +X15206695Y-5170050D01* +X15290655Y-9684980D02* +X15320655Y-9714980D01* +X15320655Y-9684980D02* +X15290655Y-9714980D01* +X15345000Y-6405000D02* +X15375000Y-6435000D01* +X15375000Y-6405000D02* +X15345000Y-6435000D01* +X15456545Y-9320980D02* +X15486545Y-9350980D01* +X15486545Y-9320980D02* +X15456545Y-9350980D01* +X15460000Y-6322310D02* +X15490000Y-6352310D01* +X15490000Y-6322310D02* +X15460000Y-6352310D01* +X15541265Y-6101130D02* +X15571265Y-6131130D01* +X15571265Y-6101130D02* +X15541265Y-6131130D01* +X15665000Y-6375000D02* +X15695000Y-6405000D01* +X15695000Y-6375000D02* +X15665000Y-6405000D01* +X15849165Y-4162310D02* +X15879165Y-4192310D01* +X15879165Y-4162310D02* +X15849165Y-4192310D01* +X15849165Y-4862310D02* +X15879165Y-4892310D01* +X15879165Y-4862310D02* +X15849165Y-4892310D01* +X15849165Y-6962310D02* +X15879165Y-6992310D01* +X15879165Y-6962310D02* +X15849165Y-6992310D01* +X15849165Y-8362310D02* +X15879165Y-8392310D01* +X15879165Y-8362310D02* +X15849165Y-8392310D01* +X15849165Y-11162310D02* +X15879165Y-11192310D01* +X15879165Y-11162310D02* +X15849165Y-11192310D01* +X15849165Y-12562310D02* +X15879165Y-12592310D01* +X15879165Y-12562310D02* +X15849165Y-12592310D01* +X15849165Y-13262310D02* +X15879165Y-13292310D01* +X15879165Y-13262310D02* +X15849165Y-13292310D01* +X16013055Y-6079600D02* +X16043055Y-6109600D01* +X16043055Y-6079600D02* +X16013055Y-6109600D01* +X16054355Y-5953220D02* +X16084355Y-5983220D01* +X16084355Y-5953220D02* +X16054355Y-5983220D01* +X16149225Y-6142120D02* +X16179225Y-6172120D01* +X16179225Y-6142120D02* +X16149225Y-6172120D01* +X16318335Y-7768640D02* +X16348335Y-7798640D01* +X16348335Y-7768640D02* +X16318335Y-7798640D01* +X16365000Y-9170000D02* +X16395000Y-9200000D01* +X16395000Y-9170000D02* +X16365000Y-9200000D01* +X16402585Y-6482350D02* +X16432585Y-6512350D01* +X16432585Y-6482350D02* +X16402585Y-6512350D01* +X16424925Y-10859920D02* +X16454925Y-10889920D01* +X16454925Y-10859920D02* +X16424925Y-10889920D01* +X16435135Y-6017510D02* +X16465135Y-6047510D01* +X16465135Y-6017510D02* +X16435135Y-6047510D01* +X16549165Y-4162310D02* +X16579165Y-4192310D01* +X16579165Y-4162310D02* +X16549165Y-4192310D01* +X16549165Y-4862310D02* +X16579165Y-4892310D01* +X16579165Y-4862310D02* +X16549165Y-4892310D01* +X16549165Y-5562310D02* +X16579165Y-5592310D01* +X16579165Y-5562310D02* +X16549165Y-5592310D01* +X16549165Y-6962310D02* +X16579165Y-6992310D01* +X16579165Y-6962310D02* +X16549165Y-6992310D01* +X16588995Y-7577930D02* +X16618995Y-7607930D01* +X16618995Y-7577930D02* +X16588995Y-7607930D01* +X16637705Y-7511040D02* +X16667705Y-7541040D01* +X16667705Y-7511040D02* +X16637705Y-7541040D01* +X16653415Y-6367310D02* +X16683415Y-6397310D01* +X16683415Y-6367310D02* +X16653415Y-6397310D01* +X16659175Y-5529150D02* +X16689175Y-5559150D01* +X16689175Y-5529150D02* +X16659175Y-5559150D01* +X16664805Y-7888030D02* +X16694805Y-7918030D01* +X16694805Y-7888030D02* +X16664805Y-7918030D01* +X16735000Y-12545000D02* +X16765000Y-12575000D01* +X16765000Y-12545000D02* +X16735000Y-12575000D01* +X16770000Y-8455000D02* +X16800000Y-8485000D01* +X16800000Y-8455000D02* +X16770000Y-8485000D01* +X16824475Y-4592620D02* +X16854475Y-4622620D01* +X16854475Y-4592620D02* +X16824475Y-4622620D01* +X16958725Y-11393720D02* +X16988725Y-11423720D01* +X16988725Y-11393720D02* +X16958725Y-11423720D01* +X16968095Y-6544750D02* +X16998095Y-6574750D01* +X16998095Y-6544750D02* +X16968095Y-6574750D01* +X17016295Y-5521260D02* +X17046295Y-5551260D01* +X17046295Y-5521260D02* +X17016295Y-5551260D01* +X17146685Y-11332730D02* +X17176685Y-11362730D01* +X17176685Y-11332730D02* +X17146685Y-11362730D01* +X17161015Y-9754090D02* +X17191015Y-9784090D01* +X17191015Y-9754090D02* +X17161015Y-9784090D01* +X17322215Y-4964270D02* +X17352215Y-4994270D01* +X17352215Y-4964270D02* +X17322215Y-4994270D01* +X17325665Y-5319630D02* +X17355665Y-5349630D01* +X17355665Y-5319630D02* +X17325665Y-5349630D01* +X17379695Y-10788300D02* +X17409695Y-10818300D01* +X17409695Y-10788300D02* +X17379695Y-10818300D01* +X17421075Y-6006680D02* +X17451075Y-6036680D01* +X17451075Y-6006680D02* +X17421075Y-6036680D01* +X17553395Y-9830940D02* +X17583395Y-9860940D01* +X17583395Y-9830940D02* +X17553395Y-9860940D01* +X17591675Y-10388940D02* +X17621675Y-10418940D01* +X17621675Y-10388940D02* +X17591675Y-10418940D01* +X17721915Y-10727610D02* +X17751915Y-10757610D01* +X17751915Y-10727610D02* +X17721915Y-10757610D01* +X17739525Y-4615210D02* +X17769525Y-4645210D01* +X17769525Y-4615210D02* +X17739525Y-4645210D01* +X17776665Y-4517310D02* +X17806665Y-4547310D01* +X17806665Y-4517310D02* +X17776665Y-4547310D01* +X17945335Y-4968520D02* +X17975335Y-4998520D01* +X17975335Y-4968520D02* +X17945335Y-4998520D01* +X18132435Y-10934830D02* +X18162435Y-10964830D01* +X18162435Y-10934830D02* +X18132435Y-10964830D01* +X18154345Y-6081140D02* +X18184345Y-6111140D01* +X18184345Y-6081140D02* +X18154345Y-6111140D01* +X18349475Y-5144910D02* +X18379475Y-5174910D01* +X18379475Y-5144910D02* +X18349475Y-5174910D01* +X18495265Y-11664120D02* +X18525265Y-11694120D01* +X18525265Y-11664120D02* +X18495265Y-11694120D01* +X18510175Y-11448510D02* +X18540175Y-11478510D01* +X18540175Y-11448510D02* +X18510175Y-11478510D01* +X18694685Y-11587690D02* +X18724685Y-11617690D01* +X18724685Y-11587690D02* +X18694685Y-11617690D01* +X18699165Y-10756750D02* +X18729165Y-10786750D01* +X18729165Y-10756750D02* +X18699165Y-10786750D01* +X18720000Y-6279640D02* +X18750000Y-6309640D01* +X18750000Y-6279640D02* +X18720000Y-6309640D01* +X18851975Y-10217310D02* +X18881975Y-10247310D01* +X18881975Y-10217310D02* +X18851975Y-10247310D01* +X18854165Y-10746600D02* +X18884165Y-10776600D01* +X18884165Y-10746600D02* +X18854165Y-10776600D01* +X18941275Y-5084740D02* +X18971275Y-5114740D01* +X18971275Y-5084740D02* +X18941275Y-5114740D01* +X19038085Y-4990190D02* +X19068085Y-5020190D01* +X19068085Y-4990190D02* +X19038085Y-5020190D01* +X19075000Y-8890000D02* +X19105000Y-8920000D01* +X19105000Y-8890000D02* +X19075000Y-8920000D01* +X19120000Y-11465000D02* +X19150000Y-11495000D01* +X19150000Y-11465000D02* +X19120000Y-11495000D01* +X19282615Y-11460210D02* +X19312615Y-11490210D01* +X19312615Y-11460210D02* +X19282615Y-11490210D01* +X19370000Y-8670000D02* +X19400000Y-8700000D01* +X19400000Y-8670000D02* +X19370000Y-8700000D01* +X19455000Y-10575000D02* +X19485000Y-10605000D01* +X19485000Y-10575000D02* +X19455000Y-10605000D01* +X19499665Y-11051810D02* +X19529665Y-11081810D01* +X19529665Y-11051810D02* +X19499665Y-11081810D01* +X19586795Y-4867770D02* +X19616795Y-4897770D01* +X19616795Y-4867770D02* +X19586795Y-4897770D01* +X19674095Y-11039430D02* +X19704095Y-11069430D01* +X19704095Y-11039430D02* +X19674095Y-11069430D01* +X19870000Y-8865000D02* +X19900000Y-8895000D01* +X19900000Y-8865000D02* +X19870000Y-8895000D01* +X19985725Y-4834250D02* +X20015725Y-4864250D01* +X20015725Y-4834250D02* +X19985725Y-4864250D01* +X19990000Y-8430000D02* +X20020000Y-8460000D01* +X20020000Y-8430000D02* +X19990000Y-8460000D01* +X20375000Y-8590000D02* +X20405000Y-8620000D01* +X20405000Y-8590000D02* +X20375000Y-8620000D01* +X20375000Y-8945000D02* +X20405000Y-8975000D01* +X20405000Y-8945000D02* +X20375000Y-8975000D01* +X20940000Y-11360000D02* +X20970000Y-11390000D01* +X20970000Y-11360000D02* +X20940000Y-11390000D01* +X11958165Y-8942310D02* +G75* +G02* +X11918165Y-8942310I-20000J0D01* +G01* +X11918165Y-8942310D02* +G75* +G02* +X11958165Y-8942310I20000J0D01* +G01* +X12702165Y-8922310D02* +G75* +G02* +X12662165Y-8922310I-20000J0D01* +G01* +X12662165Y-8922310D02* +G75* +G02* +X12702165Y-8922310I20000J0D01* +G01* +X20235165Y-11319310D02* +G75* +G02* +X20195165Y-11319310I-20000J0D01* +G01* +X20195165Y-11319310D02* +G75* +G02* +X20235165Y-11319310I20000J0D01* +G01* +X16117500Y-12922500D02* +X16117500Y-12962500D01* +X16097500Y-12942500D02* +X16137500Y-12942500D01* +X16117500Y-13057500D02* +X16117500Y-13097500D01* +X16097500Y-13077500D02* +X16137500Y-13077500D01* +X16202500Y-12922500D02* +X16202500Y-12962500D01* +X16182500Y-12942500D02* +X16222500Y-12942500D01* +X16202500Y-13057500D02* +X16202500Y-13097500D01* +X16182500Y-13077500D02* +X16222500Y-13077500D01* +X16287500Y-12922500D02* +X16287500Y-12962500D01* +X16267500Y-12942500D02* +X16307500Y-12942500D01* +X16287500Y-13057500D02* +X16287500Y-13097500D01* +X16267500Y-13077500D02* +X16307500Y-13077500D01* +X16372500Y-12922500D02* +X16372500Y-12962500D01* +X16352500Y-12942500D02* +X16392500Y-12942500D01* +X16372500Y-13057500D02* +X16372500Y-13097500D01* +X16352500Y-13077500D02* +X16392500Y-13077500D01* +X16457500Y-12922500D02* +X16457500Y-12962500D01* +X16437500Y-12942500D02* +X16477500Y-12942500D01* +X16457500Y-13057500D02* +X16457500Y-13097500D01* +X16437500Y-13077500D02* +X16477500Y-13077500D01* +X16542500Y-12922500D02* +X16542500Y-12962500D01* +X16522500Y-12942500D02* +X16562500Y-12942500D01* +X16542500Y-13057500D02* +X16542500Y-13097500D01* +X16522500Y-13077500D02* +X16562500Y-13077500D01* +X16627500Y-12922500D02* +X16627500Y-12962500D01* +X16607500Y-12942500D02* +X16647500Y-12942500D01* +X16627500Y-13057500D02* +X16627500Y-13097500D01* +X16607500Y-13077500D02* +X16647500Y-13077500D01* +X16712500Y-12922500D02* +X16712500Y-12962500D01* +X16692500Y-12942500D02* +X16732500Y-12942500D01* +X16712500Y-13057500D02* +X16712500Y-13097500D01* +X16692500Y-13077500D02* +X16732500Y-13077500D01* +X16003713Y-13061713D02* +X16003713Y-13019287D01* +X15961287Y-13019287D01* +X15961287Y-13061713D01* +X16003713Y-13061713D01* +X15952500Y-12965500D02* +X15952500Y-13115500D01* +X16012500Y-13115500D02* +G75* +G02* +X15952500Y-13115500I-30000J0D01* +G01* +X16012500Y-13115500D02* +X16012500Y-12965500D01* +X16012500Y-12965500D02* +G75* +G03* +X15952500Y-12965500I-30000J0D01* +G01* +X16003713Y-13399713D02* +X16003713Y-13357287D01* +X15961287Y-13357287D01* +X15961287Y-13399713D01* +X16003713Y-13399713D01* +X15952500Y-13338500D02* +X15952500Y-13418500D01* +X16012500Y-13418500D02* +G75* +G02* +X15952500Y-13418500I-30000J0D01* +G01* +X16012500Y-13418500D02* +X16012500Y-13338500D01* +X16012500Y-13338500D02* +G75* +G03* +X15952500Y-13338500I-30000J0D01* +G01* +X16868713Y-13061713D02* +X16868713Y-13019287D01* +X16826287Y-13019287D01* +X16826287Y-13061713D01* +X16868713Y-13061713D01* +X16817500Y-12965500D02* +X16817500Y-13115500D01* +X16877500Y-13115500D02* +G75* +G02* +X16817500Y-13115500I-30000J0D01* +G01* +X16877500Y-13115500D02* +X16877500Y-12965500D01* +X16877500Y-12965500D02* +G75* +G03* +X16817500Y-12965500I-30000J0D01* +G01* +X16868713Y-13399713D02* +X16868713Y-13357287D01* +X16826287Y-13357287D01* +X16826287Y-13399713D01* +X16868713Y-13399713D01* +X16817500Y-13338500D02* +X16817500Y-13418500D01* +X16877500Y-13418500D02* +G75* +G02* +X16817500Y-13418500I-30000J0D01* +G01* +X16877500Y-13418500D02* +X16877500Y-13338500D01* +X16877500Y-13338500D02* +G75* +G03* +X16817500Y-13338500I-30000J0D01* +G01* +X17419165Y-7522310D02* +X17459165Y-7482310D01* +X17419165Y-7442310D01* +X17379165Y-7482310D01* +X17419165Y-7522310D01* +X17419165Y-7722310D02* +X17459165Y-7682310D01* +X17419165Y-7642310D01* +X17379165Y-7682310D01* +X17419165Y-7722310D01* +X17419165Y-7922310D02* +X17459165Y-7882310D01* +X17419165Y-7842310D01* +X17379165Y-7882310D01* +X17419165Y-7922310D01* +X17419165Y-8122310D02* +X17459165Y-8082310D01* +X17419165Y-8042310D01* +X17379165Y-8082310D01* +X17419165Y-8122310D01* +X17419165Y-8322310D02* +X17459165Y-8282310D01* +X17419165Y-8242310D01* +X17379165Y-8282310D01* +X17419165Y-8322310D01* +X17419165Y-8522310D02* +X17459165Y-8482310D01* +X17419165Y-8442310D01* +X17379165Y-8482310D01* +X17419165Y-8522310D01* +X17419165Y-8722310D02* +X17459165Y-8682310D01* +X17419165Y-8642310D01* +X17379165Y-8682310D01* +X17419165Y-8722310D01* +X17419165Y-8922310D02* +X17459165Y-8882310D01* +X17419165Y-8842310D01* +X17379165Y-8882310D01* +X17419165Y-8922310D01* +X17419165Y-9122310D02* +X17459165Y-9082310D01* +X17419165Y-9042310D01* +X17379165Y-9082310D01* +X17419165Y-9122310D01* +X17419165Y-9322310D02* +X17459165Y-9282310D01* +X17419165Y-9242310D01* +X17379165Y-9282310D01* +X17419165Y-9322310D01* +X19654165Y-7522310D02* +X19694165Y-7482310D01* +X19654165Y-7442310D01* +X19614165Y-7482310D01* +X19654165Y-7522310D01* +X19654165Y-7722310D02* +X19694165Y-7682310D01* +X19654165Y-7642310D01* +X19614165Y-7682310D01* +X19654165Y-7722310D01* +X19654165Y-7922310D02* +X19694165Y-7882310D01* +X19654165Y-7842310D01* +X19614165Y-7882310D01* +X19654165Y-7922310D01* +X19654165Y-8122310D02* +X19694165Y-8082310D01* +X19654165Y-8042310D01* +X19614165Y-8082310D01* +X19654165Y-8122310D01* +X19654165Y-8322310D02* +X19694165Y-8282310D01* +X19654165Y-8242310D01* +X19614165Y-8282310D01* +X19654165Y-8322310D01* +X19654165Y-8522310D02* +X19694165Y-8482310D01* +X19654165Y-8442310D01* +X19614165Y-8482310D01* +X19654165Y-8522310D01* +X19654165Y-8722310D02* +X19694165Y-8682310D01* +X19654165Y-8642310D01* +X19614165Y-8682310D01* +X19654165Y-8722310D01* +X19654165Y-8922310D02* +X19694165Y-8882310D01* +X19654165Y-8842310D01* +X19614165Y-8882310D01* +X19654165Y-8922310D01* +X19654165Y-9122310D02* +X19694165Y-9082310D01* +X19654165Y-9042310D01* +X19614165Y-9082310D01* +X19654165Y-9122310D01* +X19654165Y-9322310D02* +X19694165Y-9282310D01* +X19654165Y-9242310D01* +X19614165Y-9282310D01* +X19654165Y-9322310D01* +X9771665Y-4584810D02* +X9866665Y-4679810D01* +X9866665Y-4584810D02* +X9771665Y-4679810D01* +X9866665Y-4632310D02* +G75* +G02* +X9771665Y-4632310I-47500J0D01* +G01* +X9771665Y-4632310D02* +G75* +G02* +X9866665Y-4632310I47500J0D01* +G01* +X10021665Y-4584810D02* +X10116665Y-4679810D01* +X10116665Y-4584810D02* +X10021665Y-4679810D01* +X10116665Y-4632310D02* +G75* +G02* +X10021665Y-4632310I-47500J0D01* +G01* +X10021665Y-4632310D02* +G75* +G02* +X10116665Y-4632310I47500J0D01* +G01* +X10271665Y-4584810D02* +X10366665Y-4679810D01* +X10366665Y-4584810D02* +X10271665Y-4679810D01* +X10366665Y-4632310D02* +G75* +G02* +X10271665Y-4632310I-47500J0D01* +G01* +X10271665Y-4632310D02* +G75* +G02* +X10366665Y-4632310I47500J0D01* +G01* +X10521665Y-4584810D02* +X10616665Y-4679810D01* +X10616665Y-4584810D02* +X10521665Y-4679810D01* +X10616665Y-4632310D02* +G75* +G02* +X10521665Y-4632310I-47500J0D01* +G01* +X10521665Y-4632310D02* +G75* +G02* +X10616665Y-4632310I47500J0D01* +G01* +X11571665Y-4584810D02* +X11666665Y-4679810D01* +X11666665Y-4584810D02* +X11571665Y-4679810D01* +X11666665Y-4632310D02* +G75* +G02* +X11571665Y-4632310I-47500J0D01* +G01* +X11571665Y-4632310D02* +G75* +G02* +X11666665Y-4632310I47500J0D01* +G01* +X11821665Y-4584810D02* +X11916665Y-4679810D01* +X11916665Y-4584810D02* +X11821665Y-4679810D01* +X11916665Y-4632310D02* +G75* +G02* +X11821665Y-4632310I-47500J0D01* +G01* +X11821665Y-4632310D02* +G75* +G02* +X11916665Y-4632310I47500J0D01* +G01* +X12071665Y-4584810D02* +X12166665Y-4679810D01* +X12166665Y-4584810D02* +X12071665Y-4679810D01* +X12166665Y-4632310D02* +G75* +G02* +X12071665Y-4632310I-47500J0D01* +G01* +X12071665Y-4632310D02* +G75* +G02* +X12166665Y-4632310I47500J0D01* +G01* +X20971665Y-5384810D02* +X21066665Y-5479810D01* +X21066665Y-5384810D02* +X20971665Y-5479810D01* +X21066665Y-5432310D02* +G75* +G02* +X20971665Y-5432310I-47500J0D01* +G01* +X20971665Y-5432310D02* +G75* +G02* +X21066665Y-5432310I47500J0D01* +G01* +X20971665Y-5634810D02* +X21066665Y-5729810D01* +X21066665Y-5634810D02* +X20971665Y-5729810D01* +X21066665Y-5682310D02* +G75* +G02* +X20971665Y-5682310I-47500J0D01* +G01* +X20971665Y-5682310D02* +G75* +G02* +X21066665Y-5682310I47500J0D01* +G01* +X20971665Y-5884810D02* +X21066665Y-5979810D01* +X21066665Y-5884810D02* +X20971665Y-5979810D01* +X21066665Y-5932310D02* +G75* +G02* +X20971665Y-5932310I-47500J0D01* +G01* +X20971665Y-5932310D02* +G75* +G02* +X21066665Y-5932310I47500J0D01* +G01* +X20971665Y-6134810D02* +X21066665Y-6229810D01* +X21066665Y-6134810D02* +X20971665Y-6229810D01* +X21066665Y-6182310D02* +G75* +G02* +X20971665Y-6182310I-47500J0D01* +G01* +X20971665Y-6182310D02* +G75* +G02* +X21066665Y-6182310I47500J0D01* +G01* +X20971665Y-8734810D02* +X21066665Y-8829810D01* +X21066665Y-8734810D02* +X20971665Y-8829810D01* +X21066665Y-8782310D02* +G75* +G02* +X20971665Y-8782310I-47500J0D01* +G01* +X20971665Y-8782310D02* +G75* +G02* +X21066665Y-8782310I47500J0D01* +G01* +X20971665Y-8984810D02* +X21066665Y-9079810D01* +X21066665Y-8984810D02* +X20971665Y-9079810D01* +X21066665Y-9032310D02* +G75* +G02* +X20971665Y-9032310I-47500J0D01* +G01* +X20971665Y-9032310D02* +G75* +G02* +X21066665Y-9032310I47500J0D01* +G01* +X20971665Y-9234810D02* +X21066665Y-9329810D01* +X21066665Y-9234810D02* +X20971665Y-9329810D01* +X21066665Y-9282310D02* +G75* +G02* +X20971665Y-9282310I-47500J0D01* +G01* +X20971665Y-9282310D02* +G75* +G02* +X21066665Y-9282310I47500J0D01* +G01* +X20971665Y-9484810D02* +X21066665Y-9579810D01* +X21066665Y-9484810D02* +X20971665Y-9579810D01* +X21066665Y-9532310D02* +G75* +G02* +X20971665Y-9532310I-47500J0D01* +G01* +X20971665Y-9532310D02* +G75* +G02* +X21066665Y-9532310I47500J0D01* +G01* +X20971665Y-10284810D02* +X21066665Y-10379810D01* +X21066665Y-10284810D02* +X20971665Y-10379810D01* +X21066665Y-10332310D02* +G75* +G02* +X20971665Y-10332310I-47500J0D01* +G01* +X20971665Y-10332310D02* +G75* +G02* +X21066665Y-10332310I47500J0D01* +G01* +X20971665Y-10534810D02* +X21066665Y-10629810D01* +X21066665Y-10534810D02* +X20971665Y-10629810D01* +X21066665Y-10582310D02* +G75* +G02* +X20971665Y-10582310I-47500J0D01* +G01* +X20971665Y-10582310D02* +G75* +G02* +X21066665Y-10582310I47500J0D01* +G01* +X20971665Y-10784810D02* +X21066665Y-10879810D01* +X21066665Y-10784810D02* +X20971665Y-10879810D01* +X21066665Y-10832310D02* +G75* +G02* +X20971665Y-10832310I-47500J0D01* +G01* +X20971665Y-10832310D02* +G75* +G02* +X21066665Y-10832310I47500J0D01* +G01* +X10561165Y-8082310D02* +X10661165Y-8182310D01* +X10661165Y-8082310D02* +X10561165Y-8182310D01* +X10611165Y-8082310D02* +X10611165Y-8182310D01* +X10561165Y-8132310D02* +X10661165Y-8132310D01* +X10669165Y-5582310D02* +X10769165Y-5682310D01* +X10769165Y-5582310D02* +X10669165Y-5682310D01* +X10719165Y-5582310D02* +X10719165Y-5682310D01* +X10669165Y-5632310D02* +X10769165Y-5632310D01* +X10669165Y-7360310D02* +X10769165Y-7460310D01* +X10769165Y-7360310D02* +X10669165Y-7460310D01* +X10719165Y-7360310D02* +X10719165Y-7460310D01* +X10669165Y-7410310D02* +X10769165Y-7410310D01* +X10815165Y-8082310D02* +X10915165Y-8182310D01* +X10915165Y-8082310D02* +X10815165Y-8182310D01* +X10865165Y-8082310D02* +X10865165Y-8182310D01* +X10815165Y-8132310D02* +X10915165Y-8132310D01* +X10923165Y-5582310D02* +X11023165Y-5682310D01* +X11023165Y-5582310D02* +X10923165Y-5682310D01* +X10973165Y-5582310D02* +X10973165Y-5682310D01* +X10923165Y-5632310D02* +X11023165Y-5632310D01* +X10923165Y-7360310D02* +X11023165Y-7460310D01* +X11023165Y-7360310D02* +X10923165Y-7460310D01* +X10973165Y-7360310D02* +X10973165Y-7460310D01* +X10923165Y-7410310D02* +X11023165Y-7410310D01* +X11069165Y-4582310D02* +X11169165Y-4682310D01* +X11169165Y-4582310D02* +X11069165Y-4682310D01* +X11119165Y-4582310D02* +X11119165Y-4682310D01* +X11069165Y-4632310D02* +X11169165Y-4632310D01* +X11069165Y-4836310D02* +X11169165Y-4936310D01* +X11169165Y-4836310D02* +X11069165Y-4936310D01* +X11119165Y-4836310D02* +X11119165Y-4936310D01* +X11069165Y-4886310D02* +X11169165Y-4886310D01* +X11069165Y-5090310D02* +X11169165Y-5190310D01* +X11169165Y-5090310D02* +X11069165Y-5190310D01* +X11119165Y-5090310D02* +X11119165Y-5190310D01* +X11069165Y-5140310D02* +X11169165Y-5140310D01* +X11069165Y-8082310D02* +X11169165Y-8182310D01* +X11169165Y-8082310D02* +X11069165Y-8182310D01* +X11119165Y-8082310D02* +X11119165Y-8182310D01* +X11069165Y-8132310D02* +X11169165Y-8132310D01* +X11177165Y-5582310D02* +X11277165Y-5682310D01* +X11277165Y-5582310D02* +X11177165Y-5682310D01* +X11227165Y-5582310D02* +X11227165Y-5682310D01* +X11177165Y-5632310D02* +X11277165Y-5632310D01* +X11177165Y-7360310D02* +X11277165Y-7460310D01* +X11277165Y-7360310D02* +X11177165Y-7460310D01* +X11227165Y-7360310D02* +X11227165Y-7460310D01* +X11177165Y-7410310D02* +X11277165Y-7410310D01* +X11323165Y-8082310D02* +X11423165Y-8182310D01* +X11423165Y-8082310D02* +X11323165Y-8182310D01* +X11373165Y-8082310D02* +X11373165Y-8182310D01* +X11323165Y-8132310D02* +X11423165Y-8132310D01* +X11431165Y-5582310D02* +X11531165Y-5682310D01* +X11531165Y-5582310D02* +X11431165Y-5682310D01* +X11481165Y-5582310D02* +X11481165Y-5682310D01* +X11431165Y-5632310D02* +X11531165Y-5632310D01* +X11431165Y-7360310D02* +X11531165Y-7460310D01* +X11531165Y-7360310D02* +X11431165Y-7460310D01* +X11481165Y-7360310D02* +X11481165Y-7460310D01* +X11431165Y-7410310D02* +X11531165Y-7410310D01* +X11475165Y-12908310D02* +X11575165Y-13008310D01* +X11575165Y-12908310D02* +X11475165Y-13008310D01* +X11525165Y-12908310D02* +X11525165Y-13008310D01* +X11475165Y-12958310D02* +X11575165Y-12958310D01* +X11577165Y-8082310D02* +X11677165Y-8182310D01* +X11677165Y-8082310D02* +X11577165Y-8182310D01* +X11627165Y-8082310D02* +X11627165Y-8182310D01* +X11577165Y-8132310D02* +X11677165Y-8132310D01* +X11685165Y-5582310D02* +X11785165Y-5682310D01* +X11785165Y-5582310D02* +X11685165Y-5682310D01* +X11735165Y-5582310D02* +X11735165Y-5682310D01* +X11685165Y-5632310D02* +X11785165Y-5632310D01* +X11685165Y-7360310D02* +X11785165Y-7460310D01* +X11785165Y-7360310D02* +X11685165Y-7460310D01* +X11735165Y-7360310D02* +X11735165Y-7460310D01* +X11685165Y-7410310D02* +X11785165Y-7410310D01* +X11729165Y-12908310D02* +X11829165Y-13008310D01* +X11829165Y-12908310D02* +X11729165Y-13008310D01* +X11779165Y-12908310D02* +X11779165Y-13008310D01* +X11729165Y-12958310D02* +X11829165Y-12958310D01* +X11831165Y-8082310D02* +X11931165Y-8182310D01* +X11931165Y-8082310D02* +X11831165Y-8182310D01* +X11881165Y-8082310D02* +X11881165Y-8182310D01* +X11831165Y-8132310D02* +X11931165Y-8132310D01* +X11939165Y-5582310D02* +X12039165Y-5682310D01* +X12039165Y-5582310D02* +X11939165Y-5682310D01* +X11989165Y-5582310D02* +X11989165Y-5682310D01* +X11939165Y-5632310D02* +X12039165Y-5632310D01* +X11939165Y-7360310D02* +X12039165Y-7460310D01* +X12039165Y-7360310D02* +X11939165Y-7460310D01* +X11989165Y-7360310D02* +X11989165Y-7460310D01* +X11939165Y-7410310D02* +X12039165Y-7410310D01* +X11983165Y-12908310D02* +X12083165Y-13008310D01* +X12083165Y-12908310D02* +X11983165Y-13008310D01* +X12033165Y-12908310D02* +X12033165Y-13008310D01* +X11983165Y-12958310D02* +X12083165Y-12958310D01* +X12085165Y-8082310D02* +X12185165Y-8182310D01* +X12185165Y-8082310D02* +X12085165Y-8182310D01* +X12135165Y-8082310D02* +X12135165Y-8182310D01* +X12085165Y-8132310D02* +X12185165Y-8132310D01* +X12193165Y-5582310D02* +X12293165Y-5682310D01* +X12293165Y-5582310D02* +X12193165Y-5682310D01* +X12243165Y-5582310D02* +X12243165Y-5682310D01* +X12193165Y-5632310D02* +X12293165Y-5632310D01* +X12193165Y-7360310D02* +X12293165Y-7460310D01* +X12293165Y-7360310D02* +X12193165Y-7460310D01* +X12243165Y-7360310D02* +X12243165Y-7460310D01* +X12193165Y-7410310D02* +X12293165Y-7410310D01* +X12237165Y-12908310D02* +X12337165Y-13008310D01* +X12337165Y-12908310D02* +X12237165Y-13008310D01* +X12287165Y-12908310D02* +X12287165Y-13008310D01* +X12237165Y-12958310D02* +X12337165Y-12958310D01* +X12339165Y-8082310D02* +X12439165Y-8182310D01* +X12439165Y-8082310D02* +X12339165Y-8182310D01* +X12389165Y-8082310D02* +X12389165Y-8182310D01* +X12339165Y-8132310D02* +X12439165Y-8132310D01* +X12447165Y-5582310D02* +X12547165Y-5682310D01* +X12547165Y-5582310D02* +X12447165Y-5682310D01* +X12497165Y-5582310D02* +X12497165Y-5682310D01* +X12447165Y-5632310D02* +X12547165Y-5632310D01* +X12447165Y-7360310D02* +X12547165Y-7460310D01* +X12547165Y-7360310D02* +X12447165Y-7460310D01* +X12497165Y-7360310D02* +X12497165Y-7460310D01* +X12447165Y-7410310D02* +X12547165Y-7410310D01* +X12491165Y-12908310D02* +X12591165Y-13008310D01* +X12591165Y-12908310D02* +X12491165Y-13008310D01* +X12541165Y-12908310D02* +X12541165Y-13008310D01* +X12491165Y-12958310D02* +X12591165Y-12958310D01* +X12593165Y-8082310D02* +X12693165Y-8182310D01* +X12693165Y-8082310D02* +X12593165Y-8182310D01* +X12643165Y-8082310D02* +X12643165Y-8182310D01* +X12593165Y-8132310D02* +X12693165Y-8132310D01* +X12669165Y-4582310D02* +X12769165Y-4682310D01* +X12769165Y-4582310D02* +X12669165Y-4682310D01* +X12719165Y-4582310D02* +X12719165Y-4682310D01* +X12669165Y-4632310D02* +X12769165Y-4632310D01* +X12701165Y-5582310D02* +X12801165Y-5682310D01* +X12801165Y-5582310D02* +X12701165Y-5682310D01* +X12751165Y-5582310D02* +X12751165Y-5682310D01* +X12701165Y-5632310D02* +X12801165Y-5632310D01* +X12701165Y-7360310D02* +X12801165Y-7460310D01* +X12801165Y-7360310D02* +X12701165Y-7460310D01* +X12751165Y-7360310D02* +X12751165Y-7460310D01* +X12701165Y-7410310D02* +X12801165Y-7410310D01* +X12745165Y-12908310D02* +X12845165Y-13008310D01* +X12845165Y-12908310D02* +X12745165Y-13008310D01* +X12795165Y-12908310D02* +X12795165Y-13008310D01* +X12745165Y-12958310D02* +X12845165Y-12958310D01* +X12847165Y-8082310D02* +X12947165Y-8182310D01* +X12947165Y-8082310D02* +X12847165Y-8182310D01* +X12897165Y-8082310D02* +X12897165Y-8182310D01* +X12847165Y-8132310D02* +X12947165Y-8132310D01* +X12919165Y-4582310D02* +X13019165Y-4682310D01* +X13019165Y-4582310D02* +X12919165Y-4682310D01* +X12969165Y-4582310D02* +X12969165Y-4682310D01* +X12919165Y-4632310D02* +X13019165Y-4632310D01* +X12955165Y-5582310D02* +X13055165Y-5682310D01* +X13055165Y-5582310D02* +X12955165Y-5682310D01* +X13005165Y-5582310D02* +X13005165Y-5682310D01* +X12955165Y-5632310D02* +X13055165Y-5632310D01* +X12955165Y-7360310D02* +X13055165Y-7460310D01* +X13055165Y-7360310D02* +X12955165Y-7460310D01* +X13005165Y-7360310D02* +X13005165Y-7460310D01* +X12955165Y-7410310D02* +X13055165Y-7410310D01* +X12999165Y-12908310D02* +X13099165Y-13008310D01* +X13099165Y-12908310D02* +X12999165Y-13008310D01* +X13049165Y-12908310D02* +X13049165Y-13008310D01* +X12999165Y-12958310D02* +X13099165Y-12958310D01* +X13209165Y-5582310D02* +X13309165Y-5682310D01* +X13309165Y-5582310D02* +X13209165Y-5682310D01* +X13259165Y-5582310D02* +X13259165Y-5682310D01* +X13209165Y-5632310D02* +X13309165Y-5632310D01* +X13209165Y-7360310D02* +X13309165Y-7460310D01* +X13309165Y-7360310D02* +X13209165Y-7460310D01* +X13259165Y-7360310D02* +X13259165Y-7460310D01* +X13209165Y-7410310D02* +X13309165Y-7410310D01* +X13253165Y-8082310D02* +X13353165Y-8182310D01* +X13353165Y-8082310D02* +X13253165Y-8182310D01* +X13303165Y-8082310D02* +X13303165Y-8182310D01* +X13253165Y-8132310D02* +X13353165Y-8132310D01* +X13253165Y-12908310D02* +X13353165Y-13008310D01* +X13353165Y-12908310D02* +X13253165Y-13008310D01* +X13303165Y-12908310D02* +X13303165Y-13008310D01* +X13253165Y-12958310D02* +X13353165Y-12958310D01* +X13463165Y-5582310D02* +X13563165Y-5682310D01* +X13563165Y-5582310D02* +X13463165Y-5682310D01* +X13513165Y-5582310D02* +X13513165Y-5682310D01* +X13463165Y-5632310D02* +X13563165Y-5632310D01* +X13463165Y-7360310D02* +X13563165Y-7460310D01* +X13563165Y-7360310D02* +X13463165Y-7460310D01* +X13513165Y-7360310D02* +X13513165Y-7460310D01* +X13463165Y-7410310D02* +X13563165Y-7410310D01* +X13507165Y-8082310D02* +X13607165Y-8182310D01* +X13607165Y-8082310D02* +X13507165Y-8182310D01* +X13557165Y-8082310D02* +X13557165Y-8182310D01* +X13507165Y-8132310D02* +X13607165Y-8132310D01* +X13529165Y-4582310D02* +X13629165Y-4682310D01* +X13629165Y-4582310D02* +X13529165Y-4682310D01* +X13579165Y-4582310D02* +X13579165Y-4682310D01* +X13529165Y-4632310D02* +X13629165Y-4632310D01* +X13717165Y-5582310D02* +X13817165Y-5682310D01* +X13817165Y-5582310D02* +X13717165Y-5682310D01* +X13767165Y-5582310D02* +X13767165Y-5682310D01* +X13717165Y-5632310D02* +X13817165Y-5632310D01* +X13717165Y-7360310D02* +X13817165Y-7460310D01* +X13817165Y-7360310D02* +X13717165Y-7460310D01* +X13767165Y-7360310D02* +X13767165Y-7460310D01* +X13717165Y-7410310D02* +X13817165Y-7410310D01* +X13761165Y-8082310D02* +X13861165Y-8182310D01* +X13861165Y-8082310D02* +X13761165Y-8182310D01* +X13811165Y-8082310D02* +X13811165Y-8182310D01* +X13761165Y-8132310D02* +X13861165Y-8132310D01* +X13761165Y-12908310D02* +X13861165Y-13008310D01* +X13861165Y-12908310D02* +X13761165Y-13008310D01* +X13811165Y-12908310D02* +X13811165Y-13008310D01* +X13761165Y-12958310D02* +X13861165Y-12958310D01* +X13779165Y-4582310D02* +X13879165Y-4682310D01* +X13879165Y-4582310D02* +X13779165Y-4682310D01* +X13829165Y-4582310D02* +X13829165Y-4682310D01* +X13779165Y-4632310D02* +X13879165Y-4632310D01* +X13971165Y-5582310D02* +X14071165Y-5682310D01* +X14071165Y-5582310D02* +X13971165Y-5682310D01* +X14021165Y-5582310D02* +X14021165Y-5682310D01* +X13971165Y-5632310D02* +X14071165Y-5632310D01* +X13971165Y-7360310D02* +X14071165Y-7460310D01* +X14071165Y-7360310D02* +X13971165Y-7460310D01* +X14021165Y-7360310D02* +X14021165Y-7460310D01* +X13971165Y-7410310D02* +X14071165Y-7410310D01* +X14015165Y-8082310D02* +X14115165Y-8182310D01* +X14115165Y-8082310D02* +X14015165Y-8182310D01* +X14065165Y-8082310D02* +X14065165Y-8182310D01* +X14015165Y-8132310D02* +X14115165Y-8132310D01* +X14015165Y-12908310D02* +X14115165Y-13008310D01* +X14115165Y-12908310D02* +X14015165Y-13008310D01* +X14065165Y-12908310D02* +X14065165Y-13008310D01* +X14015165Y-12958310D02* +X14115165Y-12958310D01* +X14225165Y-5582310D02* +X14325165Y-5682310D01* +X14325165Y-5582310D02* +X14225165Y-5682310D01* +X14275165Y-5582310D02* +X14275165Y-5682310D01* +X14225165Y-5632310D02* +X14325165Y-5632310D01* +X14225165Y-7360310D02* +X14325165Y-7460310D01* +X14325165Y-7360310D02* +X14225165Y-7460310D01* +X14275165Y-7360310D02* +X14275165Y-7460310D01* +X14225165Y-7410310D02* +X14325165Y-7410310D01* +X14269165Y-8082310D02* +X14369165Y-8182310D01* +X14369165Y-8082310D02* +X14269165Y-8182310D01* +X14319165Y-8082310D02* +X14319165Y-8182310D01* +X14269165Y-8132310D02* +X14369165Y-8132310D01* +X14269165Y-12908310D02* +X14369165Y-13008310D01* +X14369165Y-12908310D02* +X14269165Y-13008310D01* +X14319165Y-12908310D02* +X14319165Y-13008310D01* +X14269165Y-12958310D02* +X14369165Y-12958310D01* +X14479165Y-5582310D02* +X14579165Y-5682310D01* +X14579165Y-5582310D02* +X14479165Y-5682310D01* +X14529165Y-5582310D02* +X14529165Y-5682310D01* +X14479165Y-5632310D02* +X14579165Y-5632310D01* +X14479165Y-7360310D02* +X14579165Y-7460310D01* +X14579165Y-7360310D02* +X14479165Y-7460310D01* +X14529165Y-7360310D02* +X14529165Y-7460310D01* +X14479165Y-7410310D02* +X14579165Y-7410310D01* +X14523165Y-8082310D02* +X14623165Y-8182310D01* +X14623165Y-8082310D02* +X14523165Y-8182310D01* +X14573165Y-8082310D02* +X14573165Y-8182310D01* +X14523165Y-8132310D02* +X14623165Y-8132310D01* +X14523165Y-12908310D02* +X14623165Y-13008310D01* +X14623165Y-12908310D02* +X14523165Y-13008310D01* +X14573165Y-12908310D02* +X14573165Y-13008310D01* +X14523165Y-12958310D02* +X14623165Y-12958310D01* +X14733165Y-5582310D02* +X14833165Y-5682310D01* +X14833165Y-5582310D02* +X14733165Y-5682310D01* +X14783165Y-5582310D02* +X14783165Y-5682310D01* +X14733165Y-5632310D02* +X14833165Y-5632310D01* +X14733165Y-7360310D02* +X14833165Y-7460310D01* +X14833165Y-7360310D02* +X14733165Y-7460310D01* +X14783165Y-7360310D02* +X14783165Y-7460310D01* +X14733165Y-7410310D02* +X14833165Y-7410310D01* +X14777165Y-8082310D02* +X14877165Y-8182310D01* +X14877165Y-8082310D02* +X14777165Y-8182310D01* +X14827165Y-8082310D02* +X14827165Y-8182310D01* +X14777165Y-8132310D02* +X14877165Y-8132310D01* +X14777165Y-12908310D02* +X14877165Y-13008310D01* +X14877165Y-12908310D02* +X14777165Y-13008310D01* +X14827165Y-12908310D02* +X14827165Y-13008310D01* +X14777165Y-12958310D02* +X14877165Y-12958310D01* +X14987165Y-5582310D02* +X15087165Y-5682310D01* +X15087165Y-5582310D02* +X14987165Y-5682310D01* +X15037165Y-5582310D02* +X15037165Y-5682310D01* +X14987165Y-5632310D02* +X15087165Y-5632310D01* +X14987165Y-7360310D02* +X15087165Y-7460310D01* +X15087165Y-7360310D02* +X14987165Y-7460310D01* +X15037165Y-7360310D02* +X15037165Y-7460310D01* +X14987165Y-7410310D02* +X15087165Y-7410310D01* +X15031165Y-8082310D02* +X15131165Y-8182310D01* +X15131165Y-8082310D02* +X15031165Y-8182310D01* +X15081165Y-8082310D02* +X15081165Y-8182310D01* +X15031165Y-8132310D02* +X15131165Y-8132310D01* +X15031165Y-12908310D02* +X15131165Y-13008310D01* +X15131165Y-12908310D02* +X15031165Y-13008310D01* +X15081165Y-12908310D02* +X15081165Y-13008310D01* +X15031165Y-12958310D02* +X15131165Y-12958310D01* +X15241165Y-5582310D02* +X15341165Y-5682310D01* +X15341165Y-5582310D02* +X15241165Y-5682310D01* +X15291165Y-5582310D02* +X15291165Y-5682310D01* +X15241165Y-5632310D02* +X15341165Y-5632310D01* +X15241165Y-7360310D02* +X15341165Y-7460310D01* +X15341165Y-7360310D02* +X15241165Y-7460310D01* +X15291165Y-7360310D02* +X15291165Y-7460310D01* +X15241165Y-7410310D02* +X15341165Y-7410310D01* +X15495165Y-5582310D02* +X15595165Y-5682310D01* +X15595165Y-5582310D02* +X15495165Y-5682310D01* +X15545165Y-5582310D02* +X15545165Y-5682310D01* +X15495165Y-5632310D02* +X15595165Y-5632310D01* +X15495165Y-7360310D02* +X15595165Y-7460310D01* +X15595165Y-7360310D02* +X15495165Y-7460310D01* +X15545165Y-7360310D02* +X15545165Y-7460310D01* +X15495165Y-7410310D02* +X15595165Y-7410310D01* +X18878415Y-5536560D02* +X18978415Y-5636560D01* +X18978415Y-5536560D02* +X18878415Y-5636560D01* +X18928415Y-5536560D02* +X18928415Y-5636560D01* +X18878415Y-5586560D02* +X18978415Y-5586560D01* +X18878415Y-5790560D02* +X18978415Y-5890560D01* +X18978415Y-5790560D02* +X18878415Y-5890560D01* +X18928415Y-5790560D02* +X18928415Y-5890560D01* +X18878415Y-5840560D02* +X18978415Y-5840560D01* +X18878415Y-6552560D02* +X18978415Y-6652560D01* +X18978415Y-6552560D02* +X18878415Y-6652560D01* +X18928415Y-6552560D02* +X18928415Y-6652560D01* +X18878415Y-6602560D02* +X18978415Y-6602560D01* +X19386415Y-5536560D02* +X19486415Y-5636560D01* +X19486415Y-5536560D02* +X19386415Y-5636560D01* +X19436415Y-5536560D02* +X19436415Y-5636560D01* +X19386415Y-5586560D02* +X19486415Y-5586560D01* +X19386415Y-5790560D02* +X19486415Y-5890560D01* +X19486415Y-5790560D02* +X19386415Y-5890560D01* +X19436415Y-5790560D02* +X19436415Y-5890560D01* +X19386415Y-5840560D02* +X19486415Y-5840560D01* +X19386415Y-6552560D02* +X19486415Y-6652560D01* +X19486415Y-6552560D02* +X19386415Y-6652560D01* +X19436415Y-6552560D02* +X19436415Y-6652560D01* +X19386415Y-6602560D02* +X19486415Y-6602560D01* +X20966665Y-6782310D02* +X21066665Y-6882310D01* +X21066665Y-6782310D02* +X20966665Y-6882310D01* +X21016665Y-6782310D02* +X21016665Y-6882310D01* +X20966665Y-6832310D02* +X21066665Y-6832310D01* +X20966665Y-7032310D02* +X21066665Y-7132310D01* +X21066665Y-7032310D02* +X20966665Y-7132310D01* +X21016665Y-7032310D02* +X21016665Y-7132310D01* +X20966665Y-7082310D02* +X21066665Y-7082310D01* +X20966665Y-7707310D02* +X21066665Y-7807310D01* +X21066665Y-7707310D02* +X20966665Y-7807310D01* +X21016665Y-7707310D02* +X21016665Y-7807310D01* +X20966665Y-7757310D02* +X21066665Y-7757310D01* +X20966665Y-7957310D02* +X21066665Y-8057310D01* +X21066665Y-7957310D02* +X20966665Y-8057310D01* +X21016665Y-7957310D02* +X21016665Y-8057310D01* +X20966665Y-8007310D02* +X21066665Y-8007310D01* +X20969165Y-11832310D02* +X21069165Y-11932310D01* +X21069165Y-11832310D02* +X20969165Y-11932310D01* +X21019165Y-11832310D02* +X21019165Y-11932310D01* +X20969165Y-11882310D02* +X21069165Y-11882310D01* +X20969165Y-12082310D02* +X21069165Y-12182310D01* +X21069165Y-12082310D02* +X20969165Y-12182310D01* +X21019165Y-12082310D02* +X21019165Y-12182310D01* +X20969165Y-12132310D02* +X21069165Y-12132310D01* +D12* +X19864165Y-13277310D02* +X19974165Y-13387310D01* +X19974165Y-13277310D02* +X19864165Y-13387310D01* +X19958056Y-13371201D02* +X19958056Y-13293419D01* +X19880274Y-13293419D01* +X19880274Y-13371201D01* +X19958056Y-13371201D01* +X19864165Y-13727310D02* +X19974165Y-13837310D01* +X19974165Y-13727310D02* +X19864165Y-13837310D01* +X19958056Y-13821201D02* +X19958056Y-13743419D01* +X19880274Y-13743419D01* +X19880274Y-13821201D01* +X19958056Y-13821201D01* +X20514165Y-13277310D02* +X20624165Y-13387310D01* +X20624165Y-13277310D02* +X20514165Y-13387310D01* +X20608056Y-13371201D02* +X20608056Y-13293419D01* +X20530274Y-13293419D01* +X20530274Y-13371201D01* +X20608056Y-13371201D01* +X20514165Y-13727310D02* +X20624165Y-13837310D01* +X20624165Y-13727310D02* +X20514165Y-13837310D01* +X20608056Y-13821201D02* +X20608056Y-13743419D01* +X20530274Y-13743419D01* +X20530274Y-13821201D01* +X20608056Y-13821201D01* +D13* +X17204165Y-13317310D02* +X17334165Y-13447310D01* +X17334165Y-13317310D02* +X17204165Y-13447310D01* +X17269165Y-13447310D02* +X17334165Y-13382310D01* +X17269165Y-13317310D01* +X17204165Y-13382310D01* +X17269165Y-13447310D01* +X17704165Y-13317310D02* +X17834165Y-13447310D01* +X17834165Y-13317310D02* +X17704165Y-13447310D01* +X17769165Y-13447310D02* +X17834165Y-13382310D01* +X17769165Y-13317310D01* +X17704165Y-13382310D01* +X17769165Y-13447310D01* +X18204165Y-13317310D02* +X18334165Y-13447310D01* +X18334165Y-13317310D02* +X18204165Y-13447310D01* +X18269165Y-13447310D02* +X18334165Y-13382310D01* +X18269165Y-13317310D01* +X18204165Y-13382310D01* +X18269165Y-13447310D01* +X18704165Y-13317310D02* +X18834165Y-13447310D01* +X18834165Y-13317310D02* +X18704165Y-13447310D01* +X18769165Y-13447310D02* +X18834165Y-13382310D01* +X18769165Y-13317310D01* +X18704165Y-13382310D01* +X18769165Y-13447310D01* +X19204165Y-13317310D02* +X19334165Y-13447310D01* +X19334165Y-13317310D02* +X19204165Y-13447310D01* +X19269165Y-13447310D02* +X19334165Y-13382310D01* +X19269165Y-13317310D01* +X19204165Y-13382310D01* +X19269165Y-13447310D01* +D11* +X8274942Y-14348794D02* +X8274942Y-14148794D01* +X8274942Y-14148794D02* +X8322561Y-14148794D01* +X8322561Y-14148794D02* +X8351132Y-14158318D01* +X8351132Y-14158318D02* +X8370180Y-14177365D01* +X8370180Y-14177365D02* +X8379704Y-14196413D01* +X8379704Y-14196413D02* +X8389228Y-14234508D01* +X8389228Y-14234508D02* +X8389228Y-14263079D01* +X8389228Y-14263079D02* +X8379704Y-14301175D01* +X8379704Y-14301175D02* +X8370180Y-14320222D01* +X8370180Y-14320222D02* +X8351132Y-14339270D01* +X8351132Y-14339270D02* +X8322561Y-14348794D01* +X8322561Y-14348794D02* +X8274942Y-14348794D01* +X8474942Y-14348794D02* +X8474942Y-14215460D01* +X8474942Y-14253556D02* +X8484466Y-14234508D01* +X8484466Y-14234508D02* +X8493989Y-14224984D01* +X8493989Y-14224984D02* +X8513037Y-14215460D01* +X8513037Y-14215460D02* +X8532085Y-14215460D01* +X8598751Y-14348794D02* +X8598751Y-14215460D01* +X8598751Y-14148794D02* +X8589228Y-14158318D01* +X8589228Y-14158318D02* +X8598751Y-14167841D01* +X8598751Y-14167841D02* +X8608275Y-14158318D01* +X8608275Y-14158318D02* +X8598751Y-14148794D01* +X8598751Y-14148794D02* +X8598751Y-14167841D01* +X8722561Y-14348794D02* +X8703513Y-14339270D01* +X8703513Y-14339270D02* +X8693989Y-14320222D01* +X8693989Y-14320222D02* +X8693989Y-14148794D01* +X8827323Y-14348794D02* +X8808275Y-14339270D01* +X8808275Y-14339270D02* +X8798751Y-14320222D01* +X8798751Y-14320222D02* +X8798751Y-14148794D01* +X9055894Y-14348794D02* +X9055894Y-14148794D01* +X9055894Y-14148794D02* +X9122561Y-14291651D01* +X9122561Y-14291651D02* +X9189228Y-14148794D01* +X9189228Y-14148794D02* +X9189228Y-14348794D01* +X9370180Y-14348794D02* +X9370180Y-14244032D01* +X9370180Y-14244032D02* +X9360656Y-14224984D01* +X9360656Y-14224984D02* +X9341609Y-14215460D01* +X9341609Y-14215460D02* +X9303513Y-14215460D01* +X9303513Y-14215460D02* +X9284466Y-14224984D01* +X9370180Y-14339270D02* +X9351132Y-14348794D01* +X9351132Y-14348794D02* +X9303513Y-14348794D01* +X9303513Y-14348794D02* +X9284466Y-14339270D01* +X9284466Y-14339270D02* +X9274942Y-14320222D01* +X9274942Y-14320222D02* +X9274942Y-14301175D01* +X9274942Y-14301175D02* +X9284466Y-14282127D01* +X9284466Y-14282127D02* +X9303513Y-14272603D01* +X9303513Y-14272603D02* +X9351132Y-14272603D01* +X9351132Y-14272603D02* +X9370180Y-14263079D01* +X9465418Y-14215460D02* +X9465418Y-14415460D01* +X9465418Y-14224984D02* +X9484466Y-14215460D01* +X9484466Y-14215460D02* +X9522561Y-14215460D01* +X9522561Y-14215460D02* +X9541609Y-14224984D01* +X9541609Y-14224984D02* +X9551132Y-14234508D01* +X9551132Y-14234508D02* +X9560656Y-14253556D01* +X9560656Y-14253556D02* +X9560656Y-14310698D01* +X9560656Y-14310698D02* +X9551132Y-14329746D01* +X9551132Y-14329746D02* +X9541609Y-14339270D01* +X9541609Y-14339270D02* +X9522561Y-14348794D01* +X9522561Y-14348794D02* +X9484466Y-14348794D01* +X9484466Y-14348794D02* +X9465418Y-14339270D01* +X9646370Y-14329746D02* +X9655894Y-14339270D01* +X9655894Y-14339270D02* +X9646370Y-14348794D01* +X9646370Y-14348794D02* +X9636847Y-14339270D01* +X9636847Y-14339270D02* +X9646370Y-14329746D01* +X9646370Y-14329746D02* +X9646370Y-14348794D01* +X9646370Y-14224984D02* +X9655894Y-14234508D01* +X9655894Y-14234508D02* +X9646370Y-14244032D01* +X9646370Y-14244032D02* +X9636847Y-14234508D01* +X9636847Y-14234508D02* +X9646370Y-14224984D01* +X9646370Y-14224984D02* +X9646370Y-14244032D01* +D10* +X7984165Y-14662310D02* +X8014165Y-14692310D01* +X8014165Y-14662310D02* +X7984165Y-14692310D01* +D11* +X8313037Y-14568794D02* +X8332085Y-14568794D01* +X8332085Y-14568794D02* +X8351132Y-14578318D01* +X8351132Y-14578318D02* +X8360656Y-14587841D01* +X8360656Y-14587841D02* +X8370180Y-14606889D01* +X8370180Y-14606889D02* +X8379704Y-14644984D01* +X8379704Y-14644984D02* +X8379704Y-14692603D01* +X8379704Y-14692603D02* +X8370180Y-14730698D01* +X8370180Y-14730698D02* +X8360656Y-14749746D01* +X8360656Y-14749746D02* +X8351132Y-14759270D01* +X8351132Y-14759270D02* +X8332085Y-14768794D01* +X8332085Y-14768794D02* +X8313037Y-14768794D01* +X8313037Y-14768794D02* +X8293989Y-14759270D01* +X8293989Y-14759270D02* +X8284466Y-14749746D01* +X8284466Y-14749746D02* +X8274942Y-14730698D01* +X8274942Y-14730698D02* +X8265418Y-14692603D01* +X8265418Y-14692603D02* +X8265418Y-14644984D01* +X8265418Y-14644984D02* +X8274942Y-14606889D01* +X8274942Y-14606889D02* +X8284466Y-14587841D01* +X8284466Y-14587841D02* +X8293989Y-14578318D01* +X8293989Y-14578318D02* +X8313037Y-14568794D01* +X8465418Y-14749746D02* +X8474942Y-14759270D01* +X8474942Y-14759270D02* +X8465418Y-14768794D01* +X8465418Y-14768794D02* +X8455894Y-14759270D01* +X8455894Y-14759270D02* +X8465418Y-14749746D01* +X8465418Y-14749746D02* +X8465418Y-14768794D01* +X8541609Y-14568794D02* +X8665418Y-14568794D01* +X8665418Y-14568794D02* +X8598751Y-14644984D01* +X8598751Y-14644984D02* +X8627323Y-14644984D01* +X8627323Y-14644984D02* +X8646370Y-14654508D01* +X8646370Y-14654508D02* +X8655894Y-14664032D01* +X8655894Y-14664032D02* +X8665418Y-14683079D01* +X8665418Y-14683079D02* +X8665418Y-14730698D01* +X8665418Y-14730698D02* +X8655894Y-14749746D01* +X8655894Y-14749746D02* +X8646370Y-14759270D01* +X8646370Y-14759270D02* +X8627323Y-14768794D01* +X8627323Y-14768794D02* +X8570180Y-14768794D01* +X8570180Y-14768794D02* +X8551132Y-14759270D01* +X8551132Y-14759270D02* +X8541609Y-14749746D01* +X8789228Y-14568794D02* +X8808275Y-14568794D01* +X8808275Y-14568794D02* +X8827323Y-14578318D01* +X8827323Y-14578318D02* +X8836847Y-14587841D01* +X8836847Y-14587841D02* +X8846370Y-14606889D01* +X8846370Y-14606889D02* +X8855894Y-14644984D01* +X8855894Y-14644984D02* +X8855894Y-14692603D01* +X8855894Y-14692603D02* +X8846370Y-14730698D01* +X8846370Y-14730698D02* +X8836847Y-14749746D01* +X8836847Y-14749746D02* +X8827323Y-14759270D01* +X8827323Y-14759270D02* +X8808275Y-14768794D01* +X8808275Y-14768794D02* +X8789228Y-14768794D01* +X8789228Y-14768794D02* +X8770180Y-14759270D01* +X8770180Y-14759270D02* +X8760656Y-14749746D01* +X8760656Y-14749746D02* +X8751132Y-14730698D01* +X8751132Y-14730698D02* +X8741609Y-14692603D01* +X8741609Y-14692603D02* +X8741609Y-14644984D01* +X8741609Y-14644984D02* +X8751132Y-14606889D01* +X8751132Y-14606889D02* +X8760656Y-14587841D01* +X8760656Y-14587841D02* +X8770180Y-14578318D01* +X8770180Y-14578318D02* +X8789228Y-14568794D01* +X8979704Y-14568794D02* +X8998751Y-14568794D01* +X8998751Y-14568794D02* +X9017799Y-14578318D01* +X9017799Y-14578318D02* +X9027323Y-14587841D01* +X9027323Y-14587841D02* +X9036847Y-14606889D01* +X9036847Y-14606889D02* +X9046370Y-14644984D01* +X9046370Y-14644984D02* +X9046370Y-14692603D01* +X9046370Y-14692603D02* +X9036847Y-14730698D01* +X9036847Y-14730698D02* +X9027323Y-14749746D01* +X9027323Y-14749746D02* +X9017799Y-14759270D01* +X9017799Y-14759270D02* +X8998751Y-14768794D01* +X8998751Y-14768794D02* +X8979704Y-14768794D01* +X8979704Y-14768794D02* +X8960656Y-14759270D01* +X8960656Y-14759270D02* +X8951132Y-14749746D01* +X8951132Y-14749746D02* +X8941609Y-14730698D01* +X8941609Y-14730698D02* +X8932085Y-14692603D01* +X8932085Y-14692603D02* +X8932085Y-14644984D01* +X8932085Y-14644984D02* +X8941609Y-14606889D01* +X8941609Y-14606889D02* +X8951132Y-14587841D01* +X8951132Y-14587841D02* +X8960656Y-14578318D01* +X8960656Y-14578318D02* +X8979704Y-14568794D01* +X9132085Y-14768794D02* +X9132085Y-14635460D01* +X9132085Y-14654508D02* +X9141609Y-14644984D01* +X9141609Y-14644984D02* +X9160656Y-14635460D01* +X9160656Y-14635460D02* +X9189228Y-14635460D01* +X9189228Y-14635460D02* +X9208275Y-14644984D01* +X9208275Y-14644984D02* +X9217799Y-14664032D01* +X9217799Y-14664032D02* +X9217799Y-14768794D01* +X9217799Y-14664032D02* +X9227323Y-14644984D01* +X9227323Y-14644984D02* +X9246370Y-14635460D01* +X9246370Y-14635460D02* +X9274942Y-14635460D01* +X9274942Y-14635460D02* +X9293990Y-14644984D01* +X9293990Y-14644984D02* +X9303513Y-14664032D01* +X9303513Y-14664032D02* +X9303513Y-14768794D01* +X9398751Y-14768794D02* +X9398751Y-14635460D01* +X9398751Y-14654508D02* +X9408275Y-14644984D01* +X9408275Y-14644984D02* +X9427323Y-14635460D01* +X9427323Y-14635460D02* +X9455894Y-14635460D01* +X9455894Y-14635460D02* +X9474942Y-14644984D01* +X9474942Y-14644984D02* +X9484466Y-14664032D01* +X9484466Y-14664032D02* +X9484466Y-14768794D01* +X9484466Y-14664032D02* +X9493990Y-14644984D01* +X9493990Y-14644984D02* +X9513037Y-14635460D01* +X9513037Y-14635460D02* +X9541609Y-14635460D01* +X9541609Y-14635460D02* +X9560656Y-14644984D01* +X9560656Y-14644984D02* +X9570180Y-14664032D01* +X9570180Y-14664032D02* +X9570180Y-14768794D01* +X9960656Y-14559270D02* +X9789228Y-14816413D01* +X10217799Y-14568794D02* +X10236847Y-14568794D01* +X10236847Y-14568794D02* +X10255894Y-14578318D01* +X10255894Y-14578318D02* +X10265418Y-14587841D01* +X10265418Y-14587841D02* +X10274942Y-14606889D01* +X10274942Y-14606889D02* +X10284466Y-14644984D01* +X10284466Y-14644984D02* +X10284466Y-14692603D01* +X10284466Y-14692603D02* +X10274942Y-14730698D01* +X10274942Y-14730698D02* +X10265418Y-14749746D01* +X10265418Y-14749746D02* +X10255894Y-14759270D01* +X10255894Y-14759270D02* +X10236847Y-14768794D01* +X10236847Y-14768794D02* +X10217799Y-14768794D01* +X10217799Y-14768794D02* +X10198752Y-14759270D01* +X10198752Y-14759270D02* +X10189228Y-14749746D01* +X10189228Y-14749746D02* +X10179704Y-14730698D01* +X10179704Y-14730698D02* +X10170180Y-14692603D01* +X10170180Y-14692603D02* +X10170180Y-14644984D01* +X10170180Y-14644984D02* +X10179704Y-14606889D01* +X10179704Y-14606889D02* +X10189228Y-14587841D01* +X10189228Y-14587841D02* +X10198752Y-14578318D01* +X10198752Y-14578318D02* +X10217799Y-14568794D01* +X10370180Y-14749746D02* +X10379704Y-14759270D01* +X10379704Y-14759270D02* +X10370180Y-14768794D01* +X10370180Y-14768794D02* +X10360656Y-14759270D01* +X10360656Y-14759270D02* +X10370180Y-14749746D01* +X10370180Y-14749746D02* +X10370180Y-14768794D01* +X10503513Y-14568794D02* +X10522561Y-14568794D01* +X10522561Y-14568794D02* +X10541609Y-14578318D01* +X10541609Y-14578318D02* +X10551133Y-14587841D01* +X10551133Y-14587841D02* +X10560656Y-14606889D01* +X10560656Y-14606889D02* +X10570180Y-14644984D01* +X10570180Y-14644984D02* +X10570180Y-14692603D01* +X10570180Y-14692603D02* +X10560656Y-14730698D01* +X10560656Y-14730698D02* +X10551133Y-14749746D01* +X10551133Y-14749746D02* +X10541609Y-14759270D01* +X10541609Y-14759270D02* +X10522561Y-14768794D01* +X10522561Y-14768794D02* +X10503513Y-14768794D01* +X10503513Y-14768794D02* +X10484466Y-14759270D01* +X10484466Y-14759270D02* +X10474942Y-14749746D01* +X10474942Y-14749746D02* +X10465418Y-14730698D01* +X10465418Y-14730698D02* +X10455894Y-14692603D01* +X10455894Y-14692603D02* +X10455894Y-14644984D01* +X10455894Y-14644984D02* +X10465418Y-14606889D01* +X10465418Y-14606889D02* +X10474942Y-14587841D01* +X10474942Y-14587841D02* +X10484466Y-14578318D01* +X10484466Y-14578318D02* +X10503513Y-14568794D01* +X10760656Y-14768794D02* +X10646371Y-14768794D01* +X10703513Y-14768794D02* +X10703513Y-14568794D01* +X10703513Y-14568794D02* +X10684466Y-14597365D01* +X10684466Y-14597365D02* +X10665418Y-14616413D01* +X10665418Y-14616413D02* +X10646371Y-14625937D01* +X10951133Y-14768794D02* +X10836847Y-14768794D01* +X10893990Y-14768794D02* +X10893990Y-14568794D01* +X10893990Y-14568794D02* +X10874942Y-14597365D01* +X10874942Y-14597365D02* +X10855894Y-14616413D01* +X10855894Y-14616413D02* +X10836847Y-14625937D01* +X11065418Y-14654508D02* +X11046371Y-14644984D01* +X11046371Y-14644984D02* +X11036847Y-14635460D01* +X11036847Y-14635460D02* +X11027323Y-14616413D01* +X11027323Y-14616413D02* +X11027323Y-14606889D01* +X11027323Y-14606889D02* +X11036847Y-14587841D01* +X11036847Y-14587841D02* +X11046371Y-14578318D01* +X11046371Y-14578318D02* +X11065418Y-14568794D01* +X11065418Y-14568794D02* +X11103514Y-14568794D01* +X11103514Y-14568794D02* +X11122561Y-14578318D01* +X11122561Y-14578318D02* +X11132085Y-14587841D01* +X11132085Y-14587841D02* +X11141609Y-14606889D01* +X11141609Y-14606889D02* +X11141609Y-14616413D01* +X11141609Y-14616413D02* +X11132085Y-14635460D01* +X11132085Y-14635460D02* +X11122561Y-14644984D01* +X11122561Y-14644984D02* +X11103514Y-14654508D01* +X11103514Y-14654508D02* +X11065418Y-14654508D01* +X11065418Y-14654508D02* +X11046371Y-14664032D01* +X11046371Y-14664032D02* +X11036847Y-14673556D01* +X11036847Y-14673556D02* +X11027323Y-14692603D01* +X11027323Y-14692603D02* +X11027323Y-14730698D01* +X11027323Y-14730698D02* +X11036847Y-14749746D01* +X11036847Y-14749746D02* +X11046371Y-14759270D01* +X11046371Y-14759270D02* +X11065418Y-14768794D01* +X11065418Y-14768794D02* +X11103514Y-14768794D01* +X11103514Y-14768794D02* +X11122561Y-14759270D01* +X11122561Y-14759270D02* +X11132085Y-14749746D01* +X11132085Y-14749746D02* +X11141609Y-14730698D01* +X11141609Y-14730698D02* +X11141609Y-14692603D01* +X11141609Y-14692603D02* +X11132085Y-14673556D01* +X11132085Y-14673556D02* +X11122561Y-14664032D01* +X11122561Y-14664032D02* +X11103514Y-14654508D01* +X11217799Y-14568794D02* +X11217799Y-14606889D01* +X11293990Y-14568794D02* +X11293990Y-14606889D01* +X11589228Y-14844984D02* +X11579704Y-14835460D01* +X11579704Y-14835460D02* +X11560656Y-14806889D01* +X11560656Y-14806889D02* +X11551133Y-14787841D01* +X11551133Y-14787841D02* +X11541609Y-14759270D01* +X11541609Y-14759270D02* +X11532085Y-14711651D01* +X11532085Y-14711651D02* +X11532085Y-14673556D01* +X11532085Y-14673556D02* +X11541609Y-14625937D01* +X11541609Y-14625937D02* +X11551133Y-14597365D01* +X11551133Y-14597365D02* +X11560656Y-14578318D01* +X11560656Y-14578318D02* +X11579704Y-14549746D01* +X11579704Y-14549746D02* +X11589228Y-14540222D01* +X11655894Y-14587841D02* +X11665418Y-14578318D01* +X11665418Y-14578318D02* +X11684466Y-14568794D01* +X11684466Y-14568794D02* +X11732085Y-14568794D01* +X11732085Y-14568794D02* +X11751133Y-14578318D01* +X11751133Y-14578318D02* +X11760656Y-14587841D01* +X11760656Y-14587841D02* +X11770180Y-14606889D01* +X11770180Y-14606889D02* +X11770180Y-14625937D01* +X11770180Y-14625937D02* +X11760656Y-14654508D01* +X11760656Y-14654508D02* +X11646371Y-14768794D01* +X11646371Y-14768794D02* +X11770180Y-14768794D01* +X11941609Y-14635460D02* +X11941609Y-14768794D01* +X11893990Y-14559270D02* +X11846371Y-14702127D01* +X11846371Y-14702127D02* +X11970180Y-14702127D01* +X12141609Y-14568794D02* +X12046371Y-14568794D01* +X12046371Y-14568794D02* +X12036847Y-14664032D01* +X12036847Y-14664032D02* +X12046371Y-14654508D01* +X12046371Y-14654508D02* +X12065418Y-14644984D01* +X12065418Y-14644984D02* +X12113037Y-14644984D01* +X12113037Y-14644984D02* +X12132085Y-14654508D01* +X12132085Y-14654508D02* +X12141609Y-14664032D01* +X12141609Y-14664032D02* +X12151133Y-14683079D01* +X12151133Y-14683079D02* +X12151133Y-14730698D01* +X12151133Y-14730698D02* +X12141609Y-14749746D01* +X12141609Y-14749746D02* +X12132085Y-14759270D01* +X12132085Y-14759270D02* +X12113037Y-14768794D01* +X12113037Y-14768794D02* +X12065418Y-14768794D01* +X12065418Y-14768794D02* +X12046371Y-14759270D01* +X12046371Y-14759270D02* +X12036847Y-14749746D01* +X12389228Y-14768794D02* +X12389228Y-14568794D01* +X12474942Y-14768794D02* +X12474942Y-14664032D01* +X12474942Y-14664032D02* +X12465418Y-14644984D01* +X12465418Y-14644984D02* +X12446371Y-14635460D01* +X12446371Y-14635460D02* +X12417799Y-14635460D01* +X12417799Y-14635460D02* +X12398752Y-14644984D01* +X12398752Y-14644984D02* +X12389228Y-14654508D01* +X12598752Y-14768794D02* +X12579704Y-14759270D01* +X12579704Y-14759270D02* +X12570180Y-14749746D01* +X12570180Y-14749746D02* +X12560656Y-14730698D01* +X12560656Y-14730698D02* +X12560656Y-14673556D01* +X12560656Y-14673556D02* +X12570180Y-14654508D01* +X12570180Y-14654508D02* +X12579704Y-14644984D01* +X12579704Y-14644984D02* +X12598752Y-14635460D01* +X12598752Y-14635460D02* +X12627323Y-14635460D01* +X12627323Y-14635460D02* +X12646371Y-14644984D01* +X12646371Y-14644984D02* +X12655895Y-14654508D01* +X12655895Y-14654508D02* +X12665418Y-14673556D01* +X12665418Y-14673556D02* +X12665418Y-14730698D01* +X12665418Y-14730698D02* +X12655895Y-14749746D01* +X12655895Y-14749746D02* +X12646371Y-14759270D01* +X12646371Y-14759270D02* +X12627323Y-14768794D01* +X12627323Y-14768794D02* +X12598752Y-14768794D01* +X12779704Y-14768794D02* +X12760656Y-14759270D01* +X12760656Y-14759270D02* +X12751133Y-14740222D01* +X12751133Y-14740222D02* +X12751133Y-14568794D01* +X12932085Y-14759270D02* +X12913037Y-14768794D01* +X12913037Y-14768794D02* +X12874942Y-14768794D01* +X12874942Y-14768794D02* +X12855895Y-14759270D01* +X12855895Y-14759270D02* +X12846371Y-14740222D01* +X12846371Y-14740222D02* +X12846371Y-14664032D01* +X12846371Y-14664032D02* +X12855895Y-14644984D01* +X12855895Y-14644984D02* +X12874942Y-14635460D01* +X12874942Y-14635460D02* +X12913037Y-14635460D01* +X12913037Y-14635460D02* +X12932085Y-14644984D01* +X12932085Y-14644984D02* +X12941609Y-14664032D01* +X12941609Y-14664032D02* +X12941609Y-14683079D01* +X12941609Y-14683079D02* +X12846371Y-14702127D01* +X13017799Y-14759270D02* +X13036847Y-14768794D01* +X13036847Y-14768794D02* +X13074942Y-14768794D01* +X13074942Y-14768794D02* +X13093990Y-14759270D01* +X13093990Y-14759270D02* +X13103514Y-14740222D01* +X13103514Y-14740222D02* +X13103514Y-14730698D01* +X13103514Y-14730698D02* +X13093990Y-14711651D01* +X13093990Y-14711651D02* +X13074942Y-14702127D01* +X13074942Y-14702127D02* +X13046371Y-14702127D01* +X13046371Y-14702127D02* +X13027323Y-14692603D01* +X13027323Y-14692603D02* +X13017799Y-14673556D01* +X13017799Y-14673556D02* +X13017799Y-14664032D01* +X13017799Y-14664032D02* +X13027323Y-14644984D01* +X13027323Y-14644984D02* +X13046371Y-14635460D01* +X13046371Y-14635460D02* +X13074942Y-14635460D01* +X13074942Y-14635460D02* +X13093990Y-14644984D01* +X13170180Y-14844984D02* +X13179704Y-14835460D01* +X13179704Y-14835460D02* +X13198752Y-14806889D01* +X13198752Y-14806889D02* +X13208276Y-14787841D01* +X13208276Y-14787841D02* +X13217799Y-14759270D01* +X13217799Y-14759270D02* +X13227323Y-14711651D01* +X13227323Y-14711651D02* +X13227323Y-14673556D01* +X13227323Y-14673556D02* +X13217799Y-14625937D01* +X13217799Y-14625937D02* +X13208276Y-14597365D01* +X13208276Y-14597365D02* +X13198752Y-14578318D01* +X13198752Y-14578318D02* +X13179704Y-14549746D01* +X13179704Y-14549746D02* +X13170180Y-14540222D01* +D10* +X8014165Y-14941310D02* +G75* +G02* +X7974165Y-14941310I-20000J0D01* +G01* +X7974165Y-14941310D02* +G75* +G02* +X8014165Y-14941310I20000J0D01* +G01* +D11* +X8313037Y-14832794D02* +X8332085Y-14832794D01* +X8332085Y-14832794D02* +X8351132Y-14842318D01* +X8351132Y-14842318D02* +X8360656Y-14851841D01* +X8360656Y-14851841D02* +X8370180Y-14870889D01* +X8370180Y-14870889D02* +X8379704Y-14908984D01* +X8379704Y-14908984D02* +X8379704Y-14956603D01* +X8379704Y-14956603D02* +X8370180Y-14994698D01* +X8370180Y-14994698D02* +X8360656Y-15013746D01* +X8360656Y-15013746D02* +X8351132Y-15023270D01* +X8351132Y-15023270D02* +X8332085Y-15032794D01* +X8332085Y-15032794D02* +X8313037Y-15032794D01* +X8313037Y-15032794D02* +X8293989Y-15023270D01* +X8293989Y-15023270D02* +X8284466Y-15013746D01* +X8284466Y-15013746D02* +X8274942Y-14994698D01* +X8274942Y-14994698D02* +X8265418Y-14956603D01* +X8265418Y-14956603D02* +X8265418Y-14908984D01* +X8265418Y-14908984D02* +X8274942Y-14870889D01* +X8274942Y-14870889D02* +X8284466Y-14851841D01* +X8284466Y-14851841D02* +X8293989Y-14842318D01* +X8293989Y-14842318D02* +X8313037Y-14832794D01* +X8465418Y-15013746D02* +X8474942Y-15023270D01* +X8474942Y-15023270D02* +X8465418Y-15032794D01* +X8465418Y-15032794D02* +X8455894Y-15023270D01* +X8455894Y-15023270D02* +X8465418Y-15013746D01* +X8465418Y-15013746D02* +X8465418Y-15032794D01* +X8646370Y-14899460D02* +X8646370Y-15032794D01* +X8598751Y-14823270D02* +X8551132Y-14966127D01* +X8551132Y-14966127D02* +X8674942Y-14966127D01* +X8789228Y-14832794D02* +X8808275Y-14832794D01* +X8808275Y-14832794D02* +X8827323Y-14842318D01* +X8827323Y-14842318D02* +X8836847Y-14851841D01* +X8836847Y-14851841D02* +X8846370Y-14870889D01* +X8846370Y-14870889D02* +X8855894Y-14908984D01* +X8855894Y-14908984D02* +X8855894Y-14956603D01* +X8855894Y-14956603D02* +X8846370Y-14994698D01* +X8846370Y-14994698D02* +X8836847Y-15013746D01* +X8836847Y-15013746D02* +X8827323Y-15023270D01* +X8827323Y-15023270D02* +X8808275Y-15032794D01* +X8808275Y-15032794D02* +X8789228Y-15032794D01* +X8789228Y-15032794D02* +X8770180Y-15023270D01* +X8770180Y-15023270D02* +X8760656Y-15013746D01* +X8760656Y-15013746D02* +X8751132Y-14994698D01* +X8751132Y-14994698D02* +X8741609Y-14956603D01* +X8741609Y-14956603D02* +X8741609Y-14908984D01* +X8741609Y-14908984D02* +X8751132Y-14870889D01* +X8751132Y-14870889D02* +X8760656Y-14851841D01* +X8760656Y-14851841D02* +X8770180Y-14842318D01* +X8770180Y-14842318D02* +X8789228Y-14832794D01* +X8979704Y-14832794D02* +X8998751Y-14832794D01* +X8998751Y-14832794D02* +X9017799Y-14842318D01* +X9017799Y-14842318D02* +X9027323Y-14851841D01* +X9027323Y-14851841D02* +X9036847Y-14870889D01* +X9036847Y-14870889D02* +X9046370Y-14908984D01* +X9046370Y-14908984D02* +X9046370Y-14956603D01* +X9046370Y-14956603D02* +X9036847Y-14994698D01* +X9036847Y-14994698D02* +X9027323Y-15013746D01* +X9027323Y-15013746D02* +X9017799Y-15023270D01* +X9017799Y-15023270D02* +X8998751Y-15032794D01* +X8998751Y-15032794D02* +X8979704Y-15032794D01* +X8979704Y-15032794D02* +X8960656Y-15023270D01* +X8960656Y-15023270D02* +X8951132Y-15013746D01* +X8951132Y-15013746D02* +X8941609Y-14994698D01* +X8941609Y-14994698D02* +X8932085Y-14956603D01* +X8932085Y-14956603D02* +X8932085Y-14908984D01* +X8932085Y-14908984D02* +X8941609Y-14870889D01* +X8941609Y-14870889D02* +X8951132Y-14851841D01* +X8951132Y-14851841D02* +X8960656Y-14842318D01* +X8960656Y-14842318D02* +X8979704Y-14832794D01* +X9132085Y-15032794D02* +X9132085Y-14899460D01* +X9132085Y-14918508D02* +X9141609Y-14908984D01* +X9141609Y-14908984D02* +X9160656Y-14899460D01* +X9160656Y-14899460D02* +X9189228Y-14899460D01* +X9189228Y-14899460D02* +X9208275Y-14908984D01* +X9208275Y-14908984D02* +X9217799Y-14928032D01* +X9217799Y-14928032D02* +X9217799Y-15032794D01* +X9217799Y-14928032D02* +X9227323Y-14908984D01* +X9227323Y-14908984D02* +X9246370Y-14899460D01* +X9246370Y-14899460D02* +X9274942Y-14899460D01* +X9274942Y-14899460D02* +X9293990Y-14908984D01* +X9293990Y-14908984D02* +X9303513Y-14928032D01* +X9303513Y-14928032D02* +X9303513Y-15032794D01* +X9398751Y-15032794D02* +X9398751Y-14899460D01* +X9398751Y-14918508D02* +X9408275Y-14908984D01* +X9408275Y-14908984D02* +X9427323Y-14899460D01* +X9427323Y-14899460D02* +X9455894Y-14899460D01* +X9455894Y-14899460D02* +X9474942Y-14908984D01* +X9474942Y-14908984D02* +X9484466Y-14928032D01* +X9484466Y-14928032D02* +X9484466Y-15032794D01* +X9484466Y-14928032D02* +X9493990Y-14908984D01* +X9493990Y-14908984D02* +X9513037Y-14899460D01* +X9513037Y-14899460D02* +X9541609Y-14899460D01* +X9541609Y-14899460D02* +X9560656Y-14908984D01* +X9560656Y-14908984D02* +X9570180Y-14928032D01* +X9570180Y-14928032D02* +X9570180Y-15032794D01* +X9960656Y-14823270D02* +X9789228Y-15080413D01* +X10217799Y-14832794D02* +X10236847Y-14832794D01* +X10236847Y-14832794D02* +X10255894Y-14842318D01* +X10255894Y-14842318D02* +X10265418Y-14851841D01* +X10265418Y-14851841D02* +X10274942Y-14870889D01* +X10274942Y-14870889D02* +X10284466Y-14908984D01* +X10284466Y-14908984D02* +X10284466Y-14956603D01* +X10284466Y-14956603D02* +X10274942Y-14994698D01* +X10274942Y-14994698D02* +X10265418Y-15013746D01* +X10265418Y-15013746D02* +X10255894Y-15023270D01* +X10255894Y-15023270D02* +X10236847Y-15032794D01* +X10236847Y-15032794D02* +X10217799Y-15032794D01* +X10217799Y-15032794D02* +X10198752Y-15023270D01* +X10198752Y-15023270D02* +X10189228Y-15013746D01* +X10189228Y-15013746D02* +X10179704Y-14994698D01* +X10179704Y-14994698D02* +X10170180Y-14956603D01* +X10170180Y-14956603D02* +X10170180Y-14908984D01* +X10170180Y-14908984D02* +X10179704Y-14870889D01* +X10179704Y-14870889D02* +X10189228Y-14851841D01* +X10189228Y-14851841D02* +X10198752Y-14842318D01* +X10198752Y-14842318D02* +X10217799Y-14832794D01* +X10370180Y-15013746D02* +X10379704Y-15023270D01* +X10379704Y-15023270D02* +X10370180Y-15032794D01* +X10370180Y-15032794D02* +X10360656Y-15023270D01* +X10360656Y-15023270D02* +X10370180Y-15013746D01* +X10370180Y-15013746D02* +X10370180Y-15032794D01* +X10503513Y-14832794D02* +X10522561Y-14832794D01* +X10522561Y-14832794D02* +X10541609Y-14842318D01* +X10541609Y-14842318D02* +X10551133Y-14851841D01* +X10551133Y-14851841D02* +X10560656Y-14870889D01* +X10560656Y-14870889D02* +X10570180Y-14908984D01* +X10570180Y-14908984D02* +X10570180Y-14956603D01* +X10570180Y-14956603D02* +X10560656Y-14994698D01* +X10560656Y-14994698D02* +X10551133Y-15013746D01* +X10551133Y-15013746D02* +X10541609Y-15023270D01* +X10541609Y-15023270D02* +X10522561Y-15032794D01* +X10522561Y-15032794D02* +X10503513Y-15032794D01* +X10503513Y-15032794D02* +X10484466Y-15023270D01* +X10484466Y-15023270D02* +X10474942Y-15013746D01* +X10474942Y-15013746D02* +X10465418Y-14994698D01* +X10465418Y-14994698D02* +X10455894Y-14956603D01* +X10455894Y-14956603D02* +X10455894Y-14908984D01* +X10455894Y-14908984D02* +X10465418Y-14870889D01* +X10465418Y-14870889D02* +X10474942Y-14851841D01* +X10474942Y-14851841D02* +X10484466Y-14842318D01* +X10484466Y-14842318D02* +X10503513Y-14832794D01* +X10760656Y-15032794D02* +X10646371Y-15032794D01* +X10703513Y-15032794D02* +X10703513Y-14832794D01* +X10703513Y-14832794D02* +X10684466Y-14861365D01* +X10684466Y-14861365D02* +X10665418Y-14880413D01* +X10665418Y-14880413D02* +X10646371Y-14889937D01* +X10941609Y-14832794D02* +X10846371Y-14832794D01* +X10846371Y-14832794D02* +X10836847Y-14928032D01* +X10836847Y-14928032D02* +X10846371Y-14918508D01* +X10846371Y-14918508D02* +X10865418Y-14908984D01* +X10865418Y-14908984D02* +X10913037Y-14908984D01* +X10913037Y-14908984D02* +X10932085Y-14918508D01* +X10932085Y-14918508D02* +X10941609Y-14928032D01* +X10941609Y-14928032D02* +X10951133Y-14947079D01* +X10951133Y-14947079D02* +X10951133Y-14994698D01* +X10951133Y-14994698D02* +X10941609Y-15013746D01* +X10941609Y-15013746D02* +X10932085Y-15023270D01* +X10932085Y-15023270D02* +X10913037Y-15032794D01* +X10913037Y-15032794D02* +X10865418Y-15032794D01* +X10865418Y-15032794D02* +X10846371Y-15023270D01* +X10846371Y-15023270D02* +X10836847Y-15013746D01* +X11017799Y-14832794D02* +X11151133Y-14832794D01* +X11151133Y-14832794D02* +X11065418Y-15032794D01* +X11217799Y-14832794D02* +X11217799Y-14870889D01* +X11293990Y-14832794D02* +X11293990Y-14870889D01* +X11589228Y-15108984D02* +X11579704Y-15099460D01* +X11579704Y-15099460D02* +X11560656Y-15070889D01* +X11560656Y-15070889D02* +X11551133Y-15051841D01* +X11551133Y-15051841D02* +X11541609Y-15023270D01* +X11541609Y-15023270D02* +X11532085Y-14975651D01* +X11532085Y-14975651D02* +X11532085Y-14937556D01* +X11532085Y-14937556D02* +X11541609Y-14889937D01* +X11541609Y-14889937D02* +X11551133Y-14861365D01* +X11551133Y-14861365D02* +X11560656Y-14842318D01* +X11560656Y-14842318D02* +X11579704Y-14813746D01* +X11579704Y-14813746D02* +X11589228Y-14804222D01* +X11646371Y-14832794D02* +X11770180Y-14832794D01* +X11770180Y-14832794D02* +X11703513Y-14908984D01* +X11703513Y-14908984D02* +X11732085Y-14908984D01* +X11732085Y-14908984D02* +X11751133Y-14918508D01* +X11751133Y-14918508D02* +X11760656Y-14928032D01* +X11760656Y-14928032D02* +X11770180Y-14947079D01* +X11770180Y-14947079D02* +X11770180Y-14994698D01* +X11770180Y-14994698D02* +X11760656Y-15013746D01* +X11760656Y-15013746D02* +X11751133Y-15023270D01* +X11751133Y-15023270D02* +X11732085Y-15032794D01* +X11732085Y-15032794D02* +X11674942Y-15032794D01* +X11674942Y-15032794D02* +X11655894Y-15023270D01* +X11655894Y-15023270D02* +X11646371Y-15013746D01* +X12008275Y-15032794D02* +X12008275Y-14832794D01* +X12093990Y-15032794D02* +X12093990Y-14928032D01* +X12093990Y-14928032D02* +X12084466Y-14908984D01* +X12084466Y-14908984D02* +X12065418Y-14899460D01* +X12065418Y-14899460D02* +X12036847Y-14899460D01* +X12036847Y-14899460D02* +X12017799Y-14908984D01* +X12017799Y-14908984D02* +X12008275Y-14918508D01* +X12217799Y-15032794D02* +X12198752Y-15023270D01* +X12198752Y-15023270D02* +X12189228Y-15013746D01* +X12189228Y-15013746D02* +X12179704Y-14994698D01* +X12179704Y-14994698D02* +X12179704Y-14937556D01* +X12179704Y-14937556D02* +X12189228Y-14918508D01* +X12189228Y-14918508D02* +X12198752Y-14908984D01* +X12198752Y-14908984D02* +X12217799Y-14899460D01* +X12217799Y-14899460D02* +X12246371Y-14899460D01* +X12246371Y-14899460D02* +X12265418Y-14908984D01* +X12265418Y-14908984D02* +X12274942Y-14918508D01* +X12274942Y-14918508D02* +X12284466Y-14937556D01* +X12284466Y-14937556D02* +X12284466Y-14994698D01* +X12284466Y-14994698D02* +X12274942Y-15013746D01* +X12274942Y-15013746D02* +X12265418Y-15023270D01* +X12265418Y-15023270D02* +X12246371Y-15032794D01* +X12246371Y-15032794D02* +X12217799Y-15032794D01* +X12398752Y-15032794D02* +X12379704Y-15023270D01* +X12379704Y-15023270D02* +X12370180Y-15004222D01* +X12370180Y-15004222D02* +X12370180Y-14832794D01* +X12551133Y-15023270D02* +X12532085Y-15032794D01* +X12532085Y-15032794D02* +X12493990Y-15032794D01* +X12493990Y-15032794D02* +X12474942Y-15023270D01* +X12474942Y-15023270D02* +X12465418Y-15004222D01* +X12465418Y-15004222D02* +X12465418Y-14928032D01* +X12465418Y-14928032D02* +X12474942Y-14908984D01* +X12474942Y-14908984D02* +X12493990Y-14899460D01* +X12493990Y-14899460D02* +X12532085Y-14899460D01* +X12532085Y-14899460D02* +X12551133Y-14908984D01* +X12551133Y-14908984D02* +X12560656Y-14928032D01* +X12560656Y-14928032D02* +X12560656Y-14947079D01* +X12560656Y-14947079D02* +X12465418Y-14966127D01* +X12636847Y-15023270D02* +X12655895Y-15032794D01* +X12655895Y-15032794D02* +X12693990Y-15032794D01* +X12693990Y-15032794D02* +X12713037Y-15023270D01* +X12713037Y-15023270D02* +X12722561Y-15004222D01* +X12722561Y-15004222D02* +X12722561Y-14994698D01* +X12722561Y-14994698D02* +X12713037Y-14975651D01* +X12713037Y-14975651D02* +X12693990Y-14966127D01* +X12693990Y-14966127D02* +X12665418Y-14966127D01* +X12665418Y-14966127D02* +X12646371Y-14956603D01* +X12646371Y-14956603D02* +X12636847Y-14937556D01* +X12636847Y-14937556D02* +X12636847Y-14928032D01* +X12636847Y-14928032D02* +X12646371Y-14908984D01* +X12646371Y-14908984D02* +X12665418Y-14899460D01* +X12665418Y-14899460D02* +X12693990Y-14899460D01* +X12693990Y-14899460D02* +X12713037Y-14908984D01* +X12789228Y-15108984D02* +X12798752Y-15099460D01* +X12798752Y-15099460D02* +X12817799Y-15070889D01* +X12817799Y-15070889D02* +X12827323Y-15051841D01* +X12827323Y-15051841D02* +X12836847Y-15023270D01* +X12836847Y-15023270D02* +X12846371Y-14975651D01* +X12846371Y-14975651D02* +X12846371Y-14937556D01* +X12846371Y-14937556D02* +X12836847Y-14889937D01* +X12836847Y-14889937D02* +X12827323Y-14861365D01* +X12827323Y-14861365D02* +X12817799Y-14842318D01* +X12817799Y-14842318D02* +X12798752Y-14813746D01* +X12798752Y-14813746D02* +X12789228Y-14804222D01* +D10* +X7994165Y-15185310D02* +X7994165Y-15225310D01* +X7974165Y-15205310D02* +X8014165Y-15205310D01* +D11* +X8313037Y-15096794D02* +X8332085Y-15096794D01* +X8332085Y-15096794D02* +X8351132Y-15106318D01* +X8351132Y-15106318D02* +X8360656Y-15115841D01* +X8360656Y-15115841D02* +X8370180Y-15134889D01* +X8370180Y-15134889D02* +X8379704Y-15172984D01* +X8379704Y-15172984D02* +X8379704Y-15220603D01* +X8379704Y-15220603D02* +X8370180Y-15258698D01* +X8370180Y-15258698D02* +X8360656Y-15277746D01* +X8360656Y-15277746D02* +X8351132Y-15287270D01* +X8351132Y-15287270D02* +X8332085Y-15296794D01* +X8332085Y-15296794D02* +X8313037Y-15296794D01* +X8313037Y-15296794D02* +X8293989Y-15287270D01* +X8293989Y-15287270D02* +X8284466Y-15277746D01* +X8284466Y-15277746D02* +X8274942Y-15258698D01* +X8274942Y-15258698D02* +X8265418Y-15220603D01* +X8265418Y-15220603D02* +X8265418Y-15172984D01* +X8265418Y-15172984D02* +X8274942Y-15134889D01* +X8274942Y-15134889D02* +X8284466Y-15115841D01* +X8284466Y-15115841D02* +X8293989Y-15106318D01* +X8293989Y-15106318D02* +X8313037Y-15096794D01* +X8465418Y-15277746D02* +X8474942Y-15287270D01* +X8474942Y-15287270D02* +X8465418Y-15296794D01* +X8465418Y-15296794D02* +X8455894Y-15287270D01* +X8455894Y-15287270D02* +X8465418Y-15277746D01* +X8465418Y-15277746D02* +X8465418Y-15296794D01* +X8646370Y-15163460D02* +X8646370Y-15296794D01* +X8598751Y-15087270D02* +X8551132Y-15230127D01* +X8551132Y-15230127D02* +X8674942Y-15230127D01* +X8789228Y-15096794D02* +X8808275Y-15096794D01* +X8808275Y-15096794D02* +X8827323Y-15106318D01* +X8827323Y-15106318D02* +X8836847Y-15115841D01* +X8836847Y-15115841D02* +X8846370Y-15134889D01* +X8846370Y-15134889D02* +X8855894Y-15172984D01* +X8855894Y-15172984D02* +X8855894Y-15220603D01* +X8855894Y-15220603D02* +X8846370Y-15258698D01* +X8846370Y-15258698D02* +X8836847Y-15277746D01* +X8836847Y-15277746D02* +X8827323Y-15287270D01* +X8827323Y-15287270D02* +X8808275Y-15296794D01* +X8808275Y-15296794D02* +X8789228Y-15296794D01* +X8789228Y-15296794D02* +X8770180Y-15287270D01* +X8770180Y-15287270D02* +X8760656Y-15277746D01* +X8760656Y-15277746D02* +X8751132Y-15258698D01* +X8751132Y-15258698D02* +X8741609Y-15220603D01* +X8741609Y-15220603D02* +X8741609Y-15172984D01* +X8741609Y-15172984D02* +X8751132Y-15134889D01* +X8751132Y-15134889D02* +X8760656Y-15115841D01* +X8760656Y-15115841D02* +X8770180Y-15106318D01* +X8770180Y-15106318D02* +X8789228Y-15096794D01* +X8979704Y-15096794D02* +X8998751Y-15096794D01* +X8998751Y-15096794D02* +X9017799Y-15106318D01* +X9017799Y-15106318D02* +X9027323Y-15115841D01* +X9027323Y-15115841D02* +X9036847Y-15134889D01* +X9036847Y-15134889D02* +X9046370Y-15172984D01* +X9046370Y-15172984D02* +X9046370Y-15220603D01* +X9046370Y-15220603D02* +X9036847Y-15258698D01* +X9036847Y-15258698D02* +X9027323Y-15277746D01* +X9027323Y-15277746D02* +X9017799Y-15287270D01* +X9017799Y-15287270D02* +X8998751Y-15296794D01* +X8998751Y-15296794D02* +X8979704Y-15296794D01* +X8979704Y-15296794D02* +X8960656Y-15287270D01* +X8960656Y-15287270D02* +X8951132Y-15277746D01* +X8951132Y-15277746D02* +X8941609Y-15258698D01* +X8941609Y-15258698D02* +X8932085Y-15220603D01* +X8932085Y-15220603D02* +X8932085Y-15172984D01* +X8932085Y-15172984D02* +X8941609Y-15134889D01* +X8941609Y-15134889D02* +X8951132Y-15115841D01* +X8951132Y-15115841D02* +X8960656Y-15106318D01* +X8960656Y-15106318D02* +X8979704Y-15096794D01* +X9132085Y-15296794D02* +X9132085Y-15163460D01* +X9132085Y-15182508D02* +X9141609Y-15172984D01* +X9141609Y-15172984D02* +X9160656Y-15163460D01* +X9160656Y-15163460D02* +X9189228Y-15163460D01* +X9189228Y-15163460D02* +X9208275Y-15172984D01* +X9208275Y-15172984D02* +X9217799Y-15192032D01* +X9217799Y-15192032D02* +X9217799Y-15296794D01* +X9217799Y-15192032D02* +X9227323Y-15172984D01* +X9227323Y-15172984D02* +X9246370Y-15163460D01* +X9246370Y-15163460D02* +X9274942Y-15163460D01* +X9274942Y-15163460D02* +X9293990Y-15172984D01* +X9293990Y-15172984D02* +X9303513Y-15192032D01* +X9303513Y-15192032D02* +X9303513Y-15296794D01* +X9398751Y-15296794D02* +X9398751Y-15163460D01* +X9398751Y-15182508D02* +X9408275Y-15172984D01* +X9408275Y-15172984D02* +X9427323Y-15163460D01* +X9427323Y-15163460D02* +X9455894Y-15163460D01* +X9455894Y-15163460D02* +X9474942Y-15172984D01* +X9474942Y-15172984D02* +X9484466Y-15192032D01* +X9484466Y-15192032D02* +X9484466Y-15296794D01* +X9484466Y-15192032D02* +X9493990Y-15172984D01* +X9493990Y-15172984D02* +X9513037Y-15163460D01* +X9513037Y-15163460D02* +X9541609Y-15163460D01* +X9541609Y-15163460D02* +X9560656Y-15172984D01* +X9560656Y-15172984D02* +X9570180Y-15192032D01* +X9570180Y-15192032D02* +X9570180Y-15296794D01* +X9960656Y-15087270D02* +X9789228Y-15344413D01* +X10217799Y-15096794D02* +X10236847Y-15096794D01* +X10236847Y-15096794D02* +X10255894Y-15106318D01* +X10255894Y-15106318D02* +X10265418Y-15115841D01* +X10265418Y-15115841D02* +X10274942Y-15134889D01* +X10274942Y-15134889D02* +X10284466Y-15172984D01* +X10284466Y-15172984D02* +X10284466Y-15220603D01* +X10284466Y-15220603D02* +X10274942Y-15258698D01* +X10274942Y-15258698D02* +X10265418Y-15277746D01* +X10265418Y-15277746D02* +X10255894Y-15287270D01* +X10255894Y-15287270D02* +X10236847Y-15296794D01* +X10236847Y-15296794D02* +X10217799Y-15296794D01* +X10217799Y-15296794D02* +X10198752Y-15287270D01* +X10198752Y-15287270D02* +X10189228Y-15277746D01* +X10189228Y-15277746D02* +X10179704Y-15258698D01* +X10179704Y-15258698D02* +X10170180Y-15220603D01* +X10170180Y-15220603D02* +X10170180Y-15172984D01* +X10170180Y-15172984D02* +X10179704Y-15134889D01* +X10179704Y-15134889D02* +X10189228Y-15115841D01* +X10189228Y-15115841D02* +X10198752Y-15106318D01* +X10198752Y-15106318D02* +X10217799Y-15096794D01* +X10370180Y-15277746D02* +X10379704Y-15287270D01* +X10379704Y-15287270D02* +X10370180Y-15296794D01* +X10370180Y-15296794D02* +X10360656Y-15287270D01* +X10360656Y-15287270D02* +X10370180Y-15277746D01* +X10370180Y-15277746D02* +X10370180Y-15296794D01* +X10503513Y-15096794D02* +X10522561Y-15096794D01* +X10522561Y-15096794D02* +X10541609Y-15106318D01* +X10541609Y-15106318D02* +X10551133Y-15115841D01* +X10551133Y-15115841D02* +X10560656Y-15134889D01* +X10560656Y-15134889D02* +X10570180Y-15172984D01* +X10570180Y-15172984D02* +X10570180Y-15220603D01* +X10570180Y-15220603D02* +X10560656Y-15258698D01* +X10560656Y-15258698D02* +X10551133Y-15277746D01* +X10551133Y-15277746D02* +X10541609Y-15287270D01* +X10541609Y-15287270D02* +X10522561Y-15296794D01* +X10522561Y-15296794D02* +X10503513Y-15296794D01* +X10503513Y-15296794D02* +X10484466Y-15287270D01* +X10484466Y-15287270D02* +X10474942Y-15277746D01* +X10474942Y-15277746D02* +X10465418Y-15258698D01* +X10465418Y-15258698D02* +X10455894Y-15220603D01* +X10455894Y-15220603D02* +X10455894Y-15172984D01* +X10455894Y-15172984D02* +X10465418Y-15134889D01* +X10465418Y-15134889D02* +X10474942Y-15115841D01* +X10474942Y-15115841D02* +X10484466Y-15106318D01* +X10484466Y-15106318D02* +X10503513Y-15096794D01* +X10760656Y-15296794D02* +X10646371Y-15296794D01* +X10703513Y-15296794D02* +X10703513Y-15096794D01* +X10703513Y-15096794D02* +X10684466Y-15125365D01* +X10684466Y-15125365D02* +X10665418Y-15144413D01* +X10665418Y-15144413D02* +X10646371Y-15153937D01* +X10941609Y-15096794D02* +X10846371Y-15096794D01* +X10846371Y-15096794D02* +X10836847Y-15192032D01* +X10836847Y-15192032D02* +X10846371Y-15182508D01* +X10846371Y-15182508D02* +X10865418Y-15172984D01* +X10865418Y-15172984D02* +X10913037Y-15172984D01* +X10913037Y-15172984D02* +X10932085Y-15182508D01* +X10932085Y-15182508D02* +X10941609Y-15192032D01* +X10941609Y-15192032D02* +X10951133Y-15211079D01* +X10951133Y-15211079D02* +X10951133Y-15258698D01* +X10951133Y-15258698D02* +X10941609Y-15277746D01* +X10941609Y-15277746D02* +X10932085Y-15287270D01* +X10932085Y-15287270D02* +X10913037Y-15296794D01* +X10913037Y-15296794D02* +X10865418Y-15296794D01* +X10865418Y-15296794D02* +X10846371Y-15287270D01* +X10846371Y-15287270D02* +X10836847Y-15277746D01* +X11017799Y-15096794D02* +X11151133Y-15096794D01* +X11151133Y-15096794D02* +X11065418Y-15296794D01* +X11217799Y-15096794D02* +X11217799Y-15134889D01* +X11293990Y-15096794D02* +X11293990Y-15134889D01* +X11589228Y-15372984D02* +X11579704Y-15363460D01* +X11579704Y-15363460D02* +X11560656Y-15334889D01* +X11560656Y-15334889D02* +X11551133Y-15315841D01* +X11551133Y-15315841D02* +X11541609Y-15287270D01* +X11541609Y-15287270D02* +X11532085Y-15239651D01* +X11532085Y-15239651D02* +X11532085Y-15201556D01* +X11532085Y-15201556D02* +X11541609Y-15153937D01* +X11541609Y-15153937D02* +X11551133Y-15125365D01* +X11551133Y-15125365D02* +X11560656Y-15106318D01* +X11560656Y-15106318D02* +X11579704Y-15077746D01* +X11579704Y-15077746D02* +X11589228Y-15068222D01* +X11770180Y-15296794D02* +X11655894Y-15296794D01* +X11713037Y-15296794D02* +X11713037Y-15096794D01* +X11713037Y-15096794D02* +X11693990Y-15125365D01* +X11693990Y-15125365D02* +X11674942Y-15144413D01* +X11674942Y-15144413D02* +X11655894Y-15153937D01* +X11941609Y-15096794D02* +X11903513Y-15096794D01* +X11903513Y-15096794D02* +X11884466Y-15106318D01* +X11884466Y-15106318D02* +X11874942Y-15115841D01* +X11874942Y-15115841D02* +X11855894Y-15144413D01* +X11855894Y-15144413D02* +X11846371Y-15182508D01* +X11846371Y-15182508D02* +X11846371Y-15258698D01* +X11846371Y-15258698D02* +X11855894Y-15277746D01* +X11855894Y-15277746D02* +X11865418Y-15287270D01* +X11865418Y-15287270D02* +X11884466Y-15296794D01* +X11884466Y-15296794D02* +X11922561Y-15296794D01* +X11922561Y-15296794D02* +X11941609Y-15287270D01* +X11941609Y-15287270D02* +X11951133Y-15277746D01* +X11951133Y-15277746D02* +X11960656Y-15258698D01* +X11960656Y-15258698D02* +X11960656Y-15211079D01* +X11960656Y-15211079D02* +X11951133Y-15192032D01* +X11951133Y-15192032D02* +X11941609Y-15182508D01* +X11941609Y-15182508D02* +X11922561Y-15172984D01* +X11922561Y-15172984D02* +X11884466Y-15172984D01* +X11884466Y-15172984D02* +X11865418Y-15182508D01* +X11865418Y-15182508D02* +X11855894Y-15192032D01* +X11855894Y-15192032D02* +X11846371Y-15211079D01* +X12198752Y-15296794D02* +X12198752Y-15096794D01* +X12284466Y-15296794D02* +X12284466Y-15192032D01* +X12284466Y-15192032D02* +X12274942Y-15172984D01* +X12274942Y-15172984D02* +X12255895Y-15163460D01* +X12255895Y-15163460D02* +X12227323Y-15163460D01* +X12227323Y-15163460D02* +X12208275Y-15172984D01* +X12208275Y-15172984D02* +X12198752Y-15182508D01* +X12408275Y-15296794D02* +X12389228Y-15287270D01* +X12389228Y-15287270D02* +X12379704Y-15277746D01* +X12379704Y-15277746D02* +X12370180Y-15258698D01* +X12370180Y-15258698D02* +X12370180Y-15201556D01* +X12370180Y-15201556D02* +X12379704Y-15182508D01* +X12379704Y-15182508D02* +X12389228Y-15172984D01* +X12389228Y-15172984D02* +X12408275Y-15163460D01* +X12408275Y-15163460D02* +X12436847Y-15163460D01* +X12436847Y-15163460D02* +X12455895Y-15172984D01* +X12455895Y-15172984D02* +X12465418Y-15182508D01* +X12465418Y-15182508D02* +X12474942Y-15201556D01* +X12474942Y-15201556D02* +X12474942Y-15258698D01* +X12474942Y-15258698D02* +X12465418Y-15277746D01* +X12465418Y-15277746D02* +X12455895Y-15287270D01* +X12455895Y-15287270D02* +X12436847Y-15296794D01* +X12436847Y-15296794D02* +X12408275Y-15296794D01* +X12589228Y-15296794D02* +X12570180Y-15287270D01* +X12570180Y-15287270D02* +X12560656Y-15268222D01* +X12560656Y-15268222D02* +X12560656Y-15096794D01* +X12741609Y-15287270D02* +X12722561Y-15296794D01* +X12722561Y-15296794D02* +X12684466Y-15296794D01* +X12684466Y-15296794D02* +X12665418Y-15287270D01* +X12665418Y-15287270D02* +X12655895Y-15268222D01* +X12655895Y-15268222D02* +X12655895Y-15192032D01* +X12655895Y-15192032D02* +X12665418Y-15172984D01* +X12665418Y-15172984D02* +X12684466Y-15163460D01* +X12684466Y-15163460D02* +X12722561Y-15163460D01* +X12722561Y-15163460D02* +X12741609Y-15172984D01* +X12741609Y-15172984D02* +X12751133Y-15192032D01* +X12751133Y-15192032D02* +X12751133Y-15211079D01* +X12751133Y-15211079D02* +X12655895Y-15230127D01* +X12827323Y-15287270D02* +X12846371Y-15296794D01* +X12846371Y-15296794D02* +X12884466Y-15296794D01* +X12884466Y-15296794D02* +X12903514Y-15287270D01* +X12903514Y-15287270D02* +X12913037Y-15268222D01* +X12913037Y-15268222D02* +X12913037Y-15258698D01* +X12913037Y-15258698D02* +X12903514Y-15239651D01* +X12903514Y-15239651D02* +X12884466Y-15230127D01* +X12884466Y-15230127D02* +X12855895Y-15230127D01* +X12855895Y-15230127D02* +X12836847Y-15220603D01* +X12836847Y-15220603D02* +X12827323Y-15201556D01* +X12827323Y-15201556D02* +X12827323Y-15192032D01* +X12827323Y-15192032D02* +X12836847Y-15172984D01* +X12836847Y-15172984D02* +X12855895Y-15163460D01* +X12855895Y-15163460D02* +X12884466Y-15163460D01* +X12884466Y-15163460D02* +X12903514Y-15172984D01* +X12979704Y-15372984D02* +X12989228Y-15363460D01* +X12989228Y-15363460D02* +X13008276Y-15334889D01* +X13008276Y-15334889D02* +X13017799Y-15315841D01* +X13017799Y-15315841D02* +X13027323Y-15287270D01* +X13027323Y-15287270D02* +X13036847Y-15239651D01* +X13036847Y-15239651D02* +X13036847Y-15201556D01* +X13036847Y-15201556D02* +X13027323Y-15153937D01* +X13027323Y-15153937D02* +X13017799Y-15125365D01* +X13017799Y-15125365D02* +X13008276Y-15106318D01* +X13008276Y-15106318D02* +X12989228Y-15077746D01* +X12989228Y-15077746D02* +X12979704Y-15068222D01* +D10* +X8005378Y-15490523D02* +X8005378Y-15448097D01* +X7962952Y-15448097D01* +X7962952Y-15490523D01* +X8005378Y-15490523D01* +D11* +X8313037Y-15360794D02* +X8332085Y-15360794D01* +X8332085Y-15360794D02* +X8351132Y-15370318D01* +X8351132Y-15370318D02* +X8360656Y-15379841D01* +X8360656Y-15379841D02* +X8370180Y-15398889D01* +X8370180Y-15398889D02* +X8379704Y-15436984D01* +X8379704Y-15436984D02* +X8379704Y-15484603D01* +X8379704Y-15484603D02* +X8370180Y-15522698D01* +X8370180Y-15522698D02* +X8360656Y-15541746D01* +X8360656Y-15541746D02* +X8351132Y-15551270D01* +X8351132Y-15551270D02* +X8332085Y-15560794D01* +X8332085Y-15560794D02* +X8313037Y-15560794D01* +X8313037Y-15560794D02* +X8293989Y-15551270D01* +X8293989Y-15551270D02* +X8284466Y-15541746D01* +X8284466Y-15541746D02* +X8274942Y-15522698D01* +X8274942Y-15522698D02* +X8265418Y-15484603D01* +X8265418Y-15484603D02* +X8265418Y-15436984D01* +X8265418Y-15436984D02* +X8274942Y-15398889D01* +X8274942Y-15398889D02* +X8284466Y-15379841D01* +X8284466Y-15379841D02* +X8293989Y-15370318D01* +X8293989Y-15370318D02* +X8313037Y-15360794D01* +X8465418Y-15541746D02* +X8474942Y-15551270D01* +X8474942Y-15551270D02* +X8465418Y-15560794D01* +X8465418Y-15560794D02* +X8455894Y-15551270D01* +X8455894Y-15551270D02* +X8465418Y-15541746D01* +X8465418Y-15541746D02* +X8465418Y-15560794D01* +X8646370Y-15360794D02* +X8608275Y-15360794D01* +X8608275Y-15360794D02* +X8589228Y-15370318D01* +X8589228Y-15370318D02* +X8579704Y-15379841D01* +X8579704Y-15379841D02* +X8560656Y-15408413D01* +X8560656Y-15408413D02* +X8551132Y-15446508D01* +X8551132Y-15446508D02* +X8551132Y-15522698D01* +X8551132Y-15522698D02* +X8560656Y-15541746D01* +X8560656Y-15541746D02* +X8570180Y-15551270D01* +X8570180Y-15551270D02* +X8589228Y-15560794D01* +X8589228Y-15560794D02* +X8627323Y-15560794D01* +X8627323Y-15560794D02* +X8646370Y-15551270D01* +X8646370Y-15551270D02* +X8655894Y-15541746D01* +X8655894Y-15541746D02* +X8665418Y-15522698D01* +X8665418Y-15522698D02* +X8665418Y-15475079D01* +X8665418Y-15475079D02* +X8655894Y-15456032D01* +X8655894Y-15456032D02* +X8646370Y-15446508D01* +X8646370Y-15446508D02* +X8627323Y-15436984D01* +X8627323Y-15436984D02* +X8589228Y-15436984D01* +X8589228Y-15436984D02* +X8570180Y-15446508D01* +X8570180Y-15446508D02* +X8560656Y-15456032D01* +X8560656Y-15456032D02* +X8551132Y-15475079D01* +X8789228Y-15360794D02* +X8808275Y-15360794D01* +X8808275Y-15360794D02* +X8827323Y-15370318D01* +X8827323Y-15370318D02* +X8836847Y-15379841D01* +X8836847Y-15379841D02* +X8846370Y-15398889D01* +X8846370Y-15398889D02* +X8855894Y-15436984D01* +X8855894Y-15436984D02* +X8855894Y-15484603D01* +X8855894Y-15484603D02* +X8846370Y-15522698D01* +X8846370Y-15522698D02* +X8836847Y-15541746D01* +X8836847Y-15541746D02* +X8827323Y-15551270D01* +X8827323Y-15551270D02* +X8808275Y-15560794D01* +X8808275Y-15560794D02* +X8789228Y-15560794D01* +X8789228Y-15560794D02* +X8770180Y-15551270D01* +X8770180Y-15551270D02* +X8760656Y-15541746D01* +X8760656Y-15541746D02* +X8751132Y-15522698D01* +X8751132Y-15522698D02* +X8741609Y-15484603D01* +X8741609Y-15484603D02* +X8741609Y-15436984D01* +X8741609Y-15436984D02* +X8751132Y-15398889D01* +X8751132Y-15398889D02* +X8760656Y-15379841D01* +X8760656Y-15379841D02* +X8770180Y-15370318D01* +X8770180Y-15370318D02* +X8789228Y-15360794D01* +X8979704Y-15360794D02* +X8998751Y-15360794D01* +X8998751Y-15360794D02* +X9017799Y-15370318D01* +X9017799Y-15370318D02* +X9027323Y-15379841D01* +X9027323Y-15379841D02* +X9036847Y-15398889D01* +X9036847Y-15398889D02* +X9046370Y-15436984D01* +X9046370Y-15436984D02* +X9046370Y-15484603D01* +X9046370Y-15484603D02* +X9036847Y-15522698D01* +X9036847Y-15522698D02* +X9027323Y-15541746D01* +X9027323Y-15541746D02* +X9017799Y-15551270D01* +X9017799Y-15551270D02* +X8998751Y-15560794D01* +X8998751Y-15560794D02* +X8979704Y-15560794D01* +X8979704Y-15560794D02* +X8960656Y-15551270D01* +X8960656Y-15551270D02* +X8951132Y-15541746D01* +X8951132Y-15541746D02* +X8941609Y-15522698D01* +X8941609Y-15522698D02* +X8932085Y-15484603D01* +X8932085Y-15484603D02* +X8932085Y-15436984D01* +X8932085Y-15436984D02* +X8941609Y-15398889D01* +X8941609Y-15398889D02* +X8951132Y-15379841D01* +X8951132Y-15379841D02* +X8960656Y-15370318D01* +X8960656Y-15370318D02* +X8979704Y-15360794D01* +X9132085Y-15560794D02* +X9132085Y-15427460D01* +X9132085Y-15446508D02* +X9141609Y-15436984D01* +X9141609Y-15436984D02* +X9160656Y-15427460D01* +X9160656Y-15427460D02* +X9189228Y-15427460D01* +X9189228Y-15427460D02* +X9208275Y-15436984D01* +X9208275Y-15436984D02* +X9217799Y-15456032D01* +X9217799Y-15456032D02* +X9217799Y-15560794D01* +X9217799Y-15456032D02* +X9227323Y-15436984D01* +X9227323Y-15436984D02* +X9246370Y-15427460D01* +X9246370Y-15427460D02* +X9274942Y-15427460D01* +X9274942Y-15427460D02* +X9293990Y-15436984D01* +X9293990Y-15436984D02* +X9303513Y-15456032D01* +X9303513Y-15456032D02* +X9303513Y-15560794D01* +X9398751Y-15560794D02* +X9398751Y-15427460D01* +X9398751Y-15446508D02* +X9408275Y-15436984D01* +X9408275Y-15436984D02* +X9427323Y-15427460D01* +X9427323Y-15427460D02* +X9455894Y-15427460D01* +X9455894Y-15427460D02* +X9474942Y-15436984D01* +X9474942Y-15436984D02* +X9484466Y-15456032D01* +X9484466Y-15456032D02* +X9484466Y-15560794D01* +X9484466Y-15456032D02* +X9493990Y-15436984D01* +X9493990Y-15436984D02* +X9513037Y-15427460D01* +X9513037Y-15427460D02* +X9541609Y-15427460D01* +X9541609Y-15427460D02* +X9560656Y-15436984D01* +X9560656Y-15436984D02* +X9570180Y-15456032D01* +X9570180Y-15456032D02* +X9570180Y-15560794D01* +X9960656Y-15351270D02* +X9789228Y-15608413D01* +X10217799Y-15360794D02* +X10236847Y-15360794D01* +X10236847Y-15360794D02* +X10255894Y-15370318D01* +X10255894Y-15370318D02* +X10265418Y-15379841D01* +X10265418Y-15379841D02* +X10274942Y-15398889D01* +X10274942Y-15398889D02* +X10284466Y-15436984D01* +X10284466Y-15436984D02* +X10284466Y-15484603D01* +X10284466Y-15484603D02* +X10274942Y-15522698D01* +X10274942Y-15522698D02* +X10265418Y-15541746D01* +X10265418Y-15541746D02* +X10255894Y-15551270D01* +X10255894Y-15551270D02* +X10236847Y-15560794D01* +X10236847Y-15560794D02* +X10217799Y-15560794D01* +X10217799Y-15560794D02* +X10198752Y-15551270D01* +X10198752Y-15551270D02* +X10189228Y-15541746D01* +X10189228Y-15541746D02* +X10179704Y-15522698D01* +X10179704Y-15522698D02* +X10170180Y-15484603D01* +X10170180Y-15484603D02* +X10170180Y-15436984D01* +X10170180Y-15436984D02* +X10179704Y-15398889D01* +X10179704Y-15398889D02* +X10189228Y-15379841D01* +X10189228Y-15379841D02* +X10198752Y-15370318D01* +X10198752Y-15370318D02* +X10217799Y-15360794D01* +X10370180Y-15541746D02* +X10379704Y-15551270D01* +X10379704Y-15551270D02* +X10370180Y-15560794D01* +X10370180Y-15560794D02* +X10360656Y-15551270D01* +X10360656Y-15551270D02* +X10370180Y-15541746D01* +X10370180Y-15541746D02* +X10370180Y-15560794D01* +X10503513Y-15360794D02* +X10522561Y-15360794D01* +X10522561Y-15360794D02* +X10541609Y-15370318D01* +X10541609Y-15370318D02* +X10551133Y-15379841D01* +X10551133Y-15379841D02* +X10560656Y-15398889D01* +X10560656Y-15398889D02* +X10570180Y-15436984D01* +X10570180Y-15436984D02* +X10570180Y-15484603D01* +X10570180Y-15484603D02* +X10560656Y-15522698D01* +X10560656Y-15522698D02* +X10551133Y-15541746D01* +X10551133Y-15541746D02* +X10541609Y-15551270D01* +X10541609Y-15551270D02* +X10522561Y-15560794D01* +X10522561Y-15560794D02* +X10503513Y-15560794D01* +X10503513Y-15560794D02* +X10484466Y-15551270D01* +X10484466Y-15551270D02* +X10474942Y-15541746D01* +X10474942Y-15541746D02* +X10465418Y-15522698D01* +X10465418Y-15522698D02* +X10455894Y-15484603D01* +X10455894Y-15484603D02* +X10455894Y-15436984D01* +X10455894Y-15436984D02* +X10465418Y-15398889D01* +X10465418Y-15398889D02* +X10474942Y-15379841D01* +X10474942Y-15379841D02* +X10484466Y-15370318D01* +X10484466Y-15370318D02* +X10503513Y-15360794D01* +X10646371Y-15379841D02* +X10655894Y-15370318D01* +X10655894Y-15370318D02* +X10674942Y-15360794D01* +X10674942Y-15360794D02* +X10722561Y-15360794D01* +X10722561Y-15360794D02* +X10741609Y-15370318D01* +X10741609Y-15370318D02* +X10751133Y-15379841D01* +X10751133Y-15379841D02* +X10760656Y-15398889D01* +X10760656Y-15398889D02* +X10760656Y-15417937D01* +X10760656Y-15417937D02* +X10751133Y-15446508D01* +X10751133Y-15446508D02* +X10636847Y-15560794D01* +X10636847Y-15560794D02* +X10760656Y-15560794D01* +X10827323Y-15360794D02* +X10951133Y-15360794D01* +X10951133Y-15360794D02* +X10884466Y-15436984D01* +X10884466Y-15436984D02* +X10913037Y-15436984D01* +X10913037Y-15436984D02* +X10932085Y-15446508D01* +X10932085Y-15446508D02* +X10941609Y-15456032D01* +X10941609Y-15456032D02* +X10951133Y-15475079D01* +X10951133Y-15475079D02* +X10951133Y-15522698D01* +X10951133Y-15522698D02* +X10941609Y-15541746D01* +X10941609Y-15541746D02* +X10932085Y-15551270D01* +X10932085Y-15551270D02* +X10913037Y-15560794D01* +X10913037Y-15560794D02* +X10855894Y-15560794D01* +X10855894Y-15560794D02* +X10836847Y-15551270D01* +X10836847Y-15551270D02* +X10827323Y-15541746D01* +X11122561Y-15360794D02* +X11084466Y-15360794D01* +X11084466Y-15360794D02* +X11065418Y-15370318D01* +X11065418Y-15370318D02* +X11055894Y-15379841D01* +X11055894Y-15379841D02* +X11036847Y-15408413D01* +X11036847Y-15408413D02* +X11027323Y-15446508D01* +X11027323Y-15446508D02* +X11027323Y-15522698D01* +X11027323Y-15522698D02* +X11036847Y-15541746D01* +X11036847Y-15541746D02* +X11046371Y-15551270D01* +X11046371Y-15551270D02* +X11065418Y-15560794D01* +X11065418Y-15560794D02* +X11103514Y-15560794D01* +X11103514Y-15560794D02* +X11122561Y-15551270D01* +X11122561Y-15551270D02* +X11132085Y-15541746D01* +X11132085Y-15541746D02* +X11141609Y-15522698D01* +X11141609Y-15522698D02* +X11141609Y-15475079D01* +X11141609Y-15475079D02* +X11132085Y-15456032D01* +X11132085Y-15456032D02* +X11122561Y-15446508D01* +X11122561Y-15446508D02* +X11103514Y-15436984D01* +X11103514Y-15436984D02* +X11065418Y-15436984D01* +X11065418Y-15436984D02* +X11046371Y-15446508D01* +X11046371Y-15446508D02* +X11036847Y-15456032D01* +X11036847Y-15456032D02* +X11027323Y-15475079D01* +X11217799Y-15360794D02* +X11217799Y-15398889D01* +X11293990Y-15360794D02* +X11293990Y-15398889D01* +X11589228Y-15636984D02* +X11579704Y-15627460D01* +X11579704Y-15627460D02* +X11560656Y-15598889D01* +X11560656Y-15598889D02* +X11551133Y-15579841D01* +X11551133Y-15579841D02* +X11541609Y-15551270D01* +X11541609Y-15551270D02* +X11532085Y-15503651D01* +X11532085Y-15503651D02* +X11532085Y-15465556D01* +X11532085Y-15465556D02* +X11541609Y-15417937D01* +X11541609Y-15417937D02* +X11551133Y-15389365D01* +X11551133Y-15389365D02* +X11560656Y-15370318D01* +X11560656Y-15370318D02* +X11579704Y-15341746D01* +X11579704Y-15341746D02* +X11589228Y-15332222D01* +X11703513Y-15360794D02* +X11722561Y-15360794D01* +X11722561Y-15360794D02* +X11741609Y-15370318D01* +X11741609Y-15370318D02* +X11751133Y-15379841D01* +X11751133Y-15379841D02* +X11760656Y-15398889D01* +X11760656Y-15398889D02* +X11770180Y-15436984D01* +X11770180Y-15436984D02* +X11770180Y-15484603D01* +X11770180Y-15484603D02* +X11760656Y-15522698D01* +X11760656Y-15522698D02* +X11751133Y-15541746D01* +X11751133Y-15541746D02* +X11741609Y-15551270D01* +X11741609Y-15551270D02* +X11722561Y-15560794D01* +X11722561Y-15560794D02* +X11703513Y-15560794D01* +X11703513Y-15560794D02* +X11684466Y-15551270D01* +X11684466Y-15551270D02* +X11674942Y-15541746D01* +X11674942Y-15541746D02* +X11665418Y-15522698D01* +X11665418Y-15522698D02* +X11655894Y-15484603D01* +X11655894Y-15484603D02* +X11655894Y-15436984D01* +X11655894Y-15436984D02* +X11665418Y-15398889D01* +X11665418Y-15398889D02* +X11674942Y-15379841D01* +X11674942Y-15379841D02* +X11684466Y-15370318D01* +X11684466Y-15370318D02* +X11703513Y-15360794D01* +X12008275Y-15560794D02* +X12008275Y-15360794D01* +X12093990Y-15560794D02* +X12093990Y-15456032D01* +X12093990Y-15456032D02* +X12084466Y-15436984D01* +X12084466Y-15436984D02* +X12065418Y-15427460D01* +X12065418Y-15427460D02* +X12036847Y-15427460D01* +X12036847Y-15427460D02* +X12017799Y-15436984D01* +X12017799Y-15436984D02* +X12008275Y-15446508D01* +X12217799Y-15560794D02* +X12198752Y-15551270D01* +X12198752Y-15551270D02* +X12189228Y-15541746D01* +X12189228Y-15541746D02* +X12179704Y-15522698D01* +X12179704Y-15522698D02* +X12179704Y-15465556D01* +X12179704Y-15465556D02* +X12189228Y-15446508D01* +X12189228Y-15446508D02* +X12198752Y-15436984D01* +X12198752Y-15436984D02* +X12217799Y-15427460D01* +X12217799Y-15427460D02* +X12246371Y-15427460D01* +X12246371Y-15427460D02* +X12265418Y-15436984D01* +X12265418Y-15436984D02* +X12274942Y-15446508D01* +X12274942Y-15446508D02* +X12284466Y-15465556D01* +X12284466Y-15465556D02* +X12284466Y-15522698D01* +X12284466Y-15522698D02* +X12274942Y-15541746D01* +X12274942Y-15541746D02* +X12265418Y-15551270D01* +X12265418Y-15551270D02* +X12246371Y-15560794D01* +X12246371Y-15560794D02* +X12217799Y-15560794D01* +X12398752Y-15560794D02* +X12379704Y-15551270D01* +X12379704Y-15551270D02* +X12370180Y-15532222D01* +X12370180Y-15532222D02* +X12370180Y-15360794D01* +X12551133Y-15551270D02* +X12532085Y-15560794D01* +X12532085Y-15560794D02* +X12493990Y-15560794D01* +X12493990Y-15560794D02* +X12474942Y-15551270D01* +X12474942Y-15551270D02* +X12465418Y-15532222D01* +X12465418Y-15532222D02* +X12465418Y-15456032D01* +X12465418Y-15456032D02* +X12474942Y-15436984D01* +X12474942Y-15436984D02* +X12493990Y-15427460D01* +X12493990Y-15427460D02* +X12532085Y-15427460D01* +X12532085Y-15427460D02* +X12551133Y-15436984D01* +X12551133Y-15436984D02* +X12560656Y-15456032D01* +X12560656Y-15456032D02* +X12560656Y-15475079D01* +X12560656Y-15475079D02* +X12465418Y-15494127D01* +X12636847Y-15551270D02* +X12655895Y-15560794D01* +X12655895Y-15560794D02* +X12693990Y-15560794D01* +X12693990Y-15560794D02* +X12713037Y-15551270D01* +X12713037Y-15551270D02* +X12722561Y-15532222D01* +X12722561Y-15532222D02* +X12722561Y-15522698D01* +X12722561Y-15522698D02* +X12713037Y-15503651D01* +X12713037Y-15503651D02* +X12693990Y-15494127D01* +X12693990Y-15494127D02* +X12665418Y-15494127D01* +X12665418Y-15494127D02* +X12646371Y-15484603D01* +X12646371Y-15484603D02* +X12636847Y-15465556D01* +X12636847Y-15465556D02* +X12636847Y-15456032D01* +X12636847Y-15456032D02* +X12646371Y-15436984D01* +X12646371Y-15436984D02* +X12665418Y-15427460D01* +X12665418Y-15427460D02* +X12693990Y-15427460D01* +X12693990Y-15427460D02* +X12713037Y-15436984D01* +X12960657Y-15484603D02* +X13113038Y-15484603D01* +X13036847Y-15560794D02* +X13036847Y-15408413D01* +X13446371Y-15427460D02* +X13446371Y-15560794D01* +X13398752Y-15351270D02* +X13351133Y-15494127D01* +X13351133Y-15494127D02* +X13474942Y-15494127D01* +X13693990Y-15551270D02* +X13713038Y-15560794D01* +X13713038Y-15560794D02* +X13751133Y-15560794D01* +X13751133Y-15560794D02* +X13770180Y-15551270D01* +X13770180Y-15551270D02* +X13779704Y-15532222D01* +X13779704Y-15532222D02* +X13779704Y-15522698D01* +X13779704Y-15522698D02* +X13770180Y-15503651D01* +X13770180Y-15503651D02* +X13751133Y-15494127D01* +X13751133Y-15494127D02* +X13722561Y-15494127D01* +X13722561Y-15494127D02* +X13703514Y-15484603D01* +X13703514Y-15484603D02* +X13693990Y-15465556D01* +X13693990Y-15465556D02* +X13693990Y-15456032D01* +X13693990Y-15456032D02* +X13703514Y-15436984D01* +X13703514Y-15436984D02* +X13722561Y-15427460D01* +X13722561Y-15427460D02* +X13751133Y-15427460D01* +X13751133Y-15427460D02* +X13770180Y-15436984D01* +X13893990Y-15560794D02* +X13874942Y-15551270D01* +X13874942Y-15551270D02* +X13865419Y-15532222D01* +X13865419Y-15532222D02* +X13865419Y-15360794D01* +X13998752Y-15560794D02* +X13979704Y-15551270D01* +X13979704Y-15551270D02* +X13970180Y-15541746D01* +X13970180Y-15541746D02* +X13960657Y-15522698D01* +X13960657Y-15522698D02* +X13960657Y-15465556D01* +X13960657Y-15465556D02* +X13970180Y-15446508D01* +X13970180Y-15446508D02* +X13979704Y-15436984D01* +X13979704Y-15436984D02* +X13998752Y-15427460D01* +X13998752Y-15427460D02* +X14027323Y-15427460D01* +X14027323Y-15427460D02* +X14046371Y-15436984D01* +X14046371Y-15436984D02* +X14055895Y-15446508D01* +X14055895Y-15446508D02* +X14065419Y-15465556D01* +X14065419Y-15465556D02* +X14065419Y-15522698D01* +X14065419Y-15522698D02* +X14055895Y-15541746D01* +X14055895Y-15541746D02* +X14046371Y-15551270D01* +X14046371Y-15551270D02* +X14027323Y-15560794D01* +X14027323Y-15560794D02* +X13998752Y-15560794D01* +X14122561Y-15427460D02* +X14198752Y-15427460D01* +X14151133Y-15360794D02* +X14151133Y-15532222D01* +X14151133Y-15532222D02* +X14160657Y-15551270D01* +X14160657Y-15551270D02* +X14179704Y-15560794D01* +X14179704Y-15560794D02* +X14198752Y-15560794D01* +X14255895Y-15551270D02* +X14274942Y-15560794D01* +X14274942Y-15560794D02* +X14313038Y-15560794D01* +X14313038Y-15560794D02* +X14332085Y-15551270D01* +X14332085Y-15551270D02* +X14341609Y-15532222D01* +X14341609Y-15532222D02* +X14341609Y-15522698D01* +X14341609Y-15522698D02* +X14332085Y-15503651D01* +X14332085Y-15503651D02* +X14313038Y-15494127D01* +X14313038Y-15494127D02* +X14284466Y-15494127D01* +X14284466Y-15494127D02* +X14265419Y-15484603D01* +X14265419Y-15484603D02* +X14255895Y-15465556D01* +X14255895Y-15465556D02* +X14255895Y-15456032D01* +X14255895Y-15456032D02* +X14265419Y-15436984D01* +X14265419Y-15436984D02* +X14284466Y-15427460D01* +X14284466Y-15427460D02* +X14313038Y-15427460D01* +X14313038Y-15427460D02* +X14332085Y-15436984D01* +X14408276Y-15636984D02* +X14417800Y-15627460D01* +X14417800Y-15627460D02* +X14436847Y-15598889D01* +X14436847Y-15598889D02* +X14446371Y-15579841D01* +X14446371Y-15579841D02* +X14455895Y-15551270D01* +X14455895Y-15551270D02* +X14465419Y-15503651D01* +X14465419Y-15503651D02* +X14465419Y-15465556D01* +X14465419Y-15465556D02* +X14455895Y-15417937D01* +X14455895Y-15417937D02* +X14446371Y-15389365D01* +X14446371Y-15389365D02* +X14436847Y-15370318D01* +X14436847Y-15370318D02* +X14417800Y-15341746D01* +X14417800Y-15341746D02* +X14408276Y-15332222D01* +D10* +X7974165Y-15773310D02* +X8014165Y-15733310D01* +X7974165Y-15693310D01* +X7934165Y-15733310D01* +X7974165Y-15773310D01* +D11* +X8313037Y-15624794D02* +X8332085Y-15624794D01* +X8332085Y-15624794D02* +X8351132Y-15634318D01* +X8351132Y-15634318D02* +X8360656Y-15643841D01* +X8360656Y-15643841D02* +X8370180Y-15662889D01* +X8370180Y-15662889D02* +X8379704Y-15700984D01* +X8379704Y-15700984D02* +X8379704Y-15748603D01* +X8379704Y-15748603D02* +X8370180Y-15786698D01* +X8370180Y-15786698D02* +X8360656Y-15805746D01* +X8360656Y-15805746D02* +X8351132Y-15815270D01* +X8351132Y-15815270D02* +X8332085Y-15824794D01* +X8332085Y-15824794D02* +X8313037Y-15824794D01* +X8313037Y-15824794D02* +X8293989Y-15815270D01* +X8293989Y-15815270D02* +X8284466Y-15805746D01* +X8284466Y-15805746D02* +X8274942Y-15786698D01* +X8274942Y-15786698D02* +X8265418Y-15748603D01* +X8265418Y-15748603D02* +X8265418Y-15700984D01* +X8265418Y-15700984D02* +X8274942Y-15662889D01* +X8274942Y-15662889D02* +X8284466Y-15643841D01* +X8284466Y-15643841D02* +X8293989Y-15634318D01* +X8293989Y-15634318D02* +X8313037Y-15624794D01* +X8465418Y-15805746D02* +X8474942Y-15815270D01* +X8474942Y-15815270D02* +X8465418Y-15824794D01* +X8465418Y-15824794D02* +X8455894Y-15815270D01* +X8455894Y-15815270D02* +X8465418Y-15805746D01* +X8465418Y-15805746D02* +X8465418Y-15824794D01* +X8589228Y-15710508D02* +X8570180Y-15700984D01* +X8570180Y-15700984D02* +X8560656Y-15691460D01* +X8560656Y-15691460D02* +X8551132Y-15672413D01* +X8551132Y-15672413D02* +X8551132Y-15662889D01* +X8551132Y-15662889D02* +X8560656Y-15643841D01* +X8560656Y-15643841D02* +X8570180Y-15634318D01* +X8570180Y-15634318D02* +X8589228Y-15624794D01* +X8589228Y-15624794D02* +X8627323Y-15624794D01* +X8627323Y-15624794D02* +X8646370Y-15634318D01* +X8646370Y-15634318D02* +X8655894Y-15643841D01* +X8655894Y-15643841D02* +X8665418Y-15662889D01* +X8665418Y-15662889D02* +X8665418Y-15672413D01* +X8665418Y-15672413D02* +X8655894Y-15691460D01* +X8655894Y-15691460D02* +X8646370Y-15700984D01* +X8646370Y-15700984D02* +X8627323Y-15710508D01* +X8627323Y-15710508D02* +X8589228Y-15710508D01* +X8589228Y-15710508D02* +X8570180Y-15720032D01* +X8570180Y-15720032D02* +X8560656Y-15729556D01* +X8560656Y-15729556D02* +X8551132Y-15748603D01* +X8551132Y-15748603D02* +X8551132Y-15786698D01* +X8551132Y-15786698D02* +X8560656Y-15805746D01* +X8560656Y-15805746D02* +X8570180Y-15815270D01* +X8570180Y-15815270D02* +X8589228Y-15824794D01* +X8589228Y-15824794D02* +X8627323Y-15824794D01* +X8627323Y-15824794D02* +X8646370Y-15815270D01* +X8646370Y-15815270D02* +X8655894Y-15805746D01* +X8655894Y-15805746D02* +X8665418Y-15786698D01* +X8665418Y-15786698D02* +X8665418Y-15748603D01* +X8665418Y-15748603D02* +X8655894Y-15729556D01* +X8655894Y-15729556D02* +X8646370Y-15720032D01* +X8646370Y-15720032D02* +X8627323Y-15710508D01* +X8789228Y-15624794D02* +X8808275Y-15624794D01* +X8808275Y-15624794D02* +X8827323Y-15634318D01* +X8827323Y-15634318D02* +X8836847Y-15643841D01* +X8836847Y-15643841D02* +X8846370Y-15662889D01* +X8846370Y-15662889D02* +X8855894Y-15700984D01* +X8855894Y-15700984D02* +X8855894Y-15748603D01* +X8855894Y-15748603D02* +X8846370Y-15786698D01* +X8846370Y-15786698D02* +X8836847Y-15805746D01* +X8836847Y-15805746D02* +X8827323Y-15815270D01* +X8827323Y-15815270D02* +X8808275Y-15824794D01* +X8808275Y-15824794D02* +X8789228Y-15824794D01* +X8789228Y-15824794D02* +X8770180Y-15815270D01* +X8770180Y-15815270D02* +X8760656Y-15805746D01* +X8760656Y-15805746D02* +X8751132Y-15786698D01* +X8751132Y-15786698D02* +X8741609Y-15748603D01* +X8741609Y-15748603D02* +X8741609Y-15700984D01* +X8741609Y-15700984D02* +X8751132Y-15662889D01* +X8751132Y-15662889D02* +X8760656Y-15643841D01* +X8760656Y-15643841D02* +X8770180Y-15634318D01* +X8770180Y-15634318D02* +X8789228Y-15624794D01* +X8979704Y-15624794D02* +X8998751Y-15624794D01* +X8998751Y-15624794D02* +X9017799Y-15634318D01* +X9017799Y-15634318D02* +X9027323Y-15643841D01* +X9027323Y-15643841D02* +X9036847Y-15662889D01* +X9036847Y-15662889D02* +X9046370Y-15700984D01* +X9046370Y-15700984D02* +X9046370Y-15748603D01* +X9046370Y-15748603D02* +X9036847Y-15786698D01* +X9036847Y-15786698D02* +X9027323Y-15805746D01* +X9027323Y-15805746D02* +X9017799Y-15815270D01* +X9017799Y-15815270D02* +X8998751Y-15824794D01* +X8998751Y-15824794D02* +X8979704Y-15824794D01* +X8979704Y-15824794D02* +X8960656Y-15815270D01* +X8960656Y-15815270D02* +X8951132Y-15805746D01* +X8951132Y-15805746D02* +X8941609Y-15786698D01* +X8941609Y-15786698D02* +X8932085Y-15748603D01* +X8932085Y-15748603D02* +X8932085Y-15700984D01* +X8932085Y-15700984D02* +X8941609Y-15662889D01* +X8941609Y-15662889D02* +X8951132Y-15643841D01* +X8951132Y-15643841D02* +X8960656Y-15634318D01* +X8960656Y-15634318D02* +X8979704Y-15624794D01* +X9132085Y-15824794D02* +X9132085Y-15691460D01* +X9132085Y-15710508D02* +X9141609Y-15700984D01* +X9141609Y-15700984D02* +X9160656Y-15691460D01* +X9160656Y-15691460D02* +X9189228Y-15691460D01* +X9189228Y-15691460D02* +X9208275Y-15700984D01* +X9208275Y-15700984D02* +X9217799Y-15720032D01* +X9217799Y-15720032D02* +X9217799Y-15824794D01* +X9217799Y-15720032D02* +X9227323Y-15700984D01* +X9227323Y-15700984D02* +X9246370Y-15691460D01* +X9246370Y-15691460D02* +X9274942Y-15691460D01* +X9274942Y-15691460D02* +X9293990Y-15700984D01* +X9293990Y-15700984D02* +X9303513Y-15720032D01* +X9303513Y-15720032D02* +X9303513Y-15824794D01* +X9398751Y-15824794D02* +X9398751Y-15691460D01* +X9398751Y-15710508D02* +X9408275Y-15700984D01* +X9408275Y-15700984D02* +X9427323Y-15691460D01* +X9427323Y-15691460D02* +X9455894Y-15691460D01* +X9455894Y-15691460D02* +X9474942Y-15700984D01* +X9474942Y-15700984D02* +X9484466Y-15720032D01* +X9484466Y-15720032D02* +X9484466Y-15824794D01* +X9484466Y-15720032D02* +X9493990Y-15700984D01* +X9493990Y-15700984D02* +X9513037Y-15691460D01* +X9513037Y-15691460D02* +X9541609Y-15691460D01* +X9541609Y-15691460D02* +X9560656Y-15700984D01* +X9560656Y-15700984D02* +X9570180Y-15720032D01* +X9570180Y-15720032D02* +X9570180Y-15824794D01* +X9960656Y-15615270D02* +X9789228Y-15872413D01* +X10217799Y-15624794D02* +X10236847Y-15624794D01* +X10236847Y-15624794D02* +X10255894Y-15634318D01* +X10255894Y-15634318D02* +X10265418Y-15643841D01* +X10265418Y-15643841D02* +X10274942Y-15662889D01* +X10274942Y-15662889D02* +X10284466Y-15700984D01* +X10284466Y-15700984D02* +X10284466Y-15748603D01* +X10284466Y-15748603D02* +X10274942Y-15786698D01* +X10274942Y-15786698D02* +X10265418Y-15805746D01* +X10265418Y-15805746D02* +X10255894Y-15815270D01* +X10255894Y-15815270D02* +X10236847Y-15824794D01* +X10236847Y-15824794D02* +X10217799Y-15824794D01* +X10217799Y-15824794D02* +X10198752Y-15815270D01* +X10198752Y-15815270D02* +X10189228Y-15805746D01* +X10189228Y-15805746D02* +X10179704Y-15786698D01* +X10179704Y-15786698D02* +X10170180Y-15748603D01* +X10170180Y-15748603D02* +X10170180Y-15700984D01* +X10170180Y-15700984D02* +X10179704Y-15662889D01* +X10179704Y-15662889D02* +X10189228Y-15643841D01* +X10189228Y-15643841D02* +X10198752Y-15634318D01* +X10198752Y-15634318D02* +X10217799Y-15624794D01* +X10370180Y-15805746D02* +X10379704Y-15815270D01* +X10379704Y-15815270D02* +X10370180Y-15824794D01* +X10370180Y-15824794D02* +X10360656Y-15815270D01* +X10360656Y-15815270D02* +X10370180Y-15805746D01* +X10370180Y-15805746D02* +X10370180Y-15824794D01* +X10503513Y-15624794D02* +X10522561Y-15624794D01* +X10522561Y-15624794D02* +X10541609Y-15634318D01* +X10541609Y-15634318D02* +X10551133Y-15643841D01* +X10551133Y-15643841D02* +X10560656Y-15662889D01* +X10560656Y-15662889D02* +X10570180Y-15700984D01* +X10570180Y-15700984D02* +X10570180Y-15748603D01* +X10570180Y-15748603D02* +X10560656Y-15786698D01* +X10560656Y-15786698D02* +X10551133Y-15805746D01* +X10551133Y-15805746D02* +X10541609Y-15815270D01* +X10541609Y-15815270D02* +X10522561Y-15824794D01* +X10522561Y-15824794D02* +X10503513Y-15824794D01* +X10503513Y-15824794D02* +X10484466Y-15815270D01* +X10484466Y-15815270D02* +X10474942Y-15805746D01* +X10474942Y-15805746D02* +X10465418Y-15786698D01* +X10465418Y-15786698D02* +X10455894Y-15748603D01* +X10455894Y-15748603D02* +X10455894Y-15700984D01* +X10455894Y-15700984D02* +X10465418Y-15662889D01* +X10465418Y-15662889D02* +X10474942Y-15643841D01* +X10474942Y-15643841D02* +X10484466Y-15634318D01* +X10484466Y-15634318D02* +X10503513Y-15624794D01* +X10636847Y-15624794D02* +X10760656Y-15624794D01* +X10760656Y-15624794D02* +X10693990Y-15700984D01* +X10693990Y-15700984D02* +X10722561Y-15700984D01* +X10722561Y-15700984D02* +X10741609Y-15710508D01* +X10741609Y-15710508D02* +X10751133Y-15720032D01* +X10751133Y-15720032D02* +X10760656Y-15739079D01* +X10760656Y-15739079D02* +X10760656Y-15786698D01* +X10760656Y-15786698D02* +X10751133Y-15805746D01* +X10751133Y-15805746D02* +X10741609Y-15815270D01* +X10741609Y-15815270D02* +X10722561Y-15824794D01* +X10722561Y-15824794D02* +X10665418Y-15824794D01* +X10665418Y-15824794D02* +X10646371Y-15815270D01* +X10646371Y-15815270D02* +X10636847Y-15805746D01* +X10951133Y-15824794D02* +X10836847Y-15824794D01* +X10893990Y-15824794D02* +X10893990Y-15624794D01* +X10893990Y-15624794D02* +X10874942Y-15653365D01* +X10874942Y-15653365D02* +X10855894Y-15672413D01* +X10855894Y-15672413D02* +X10836847Y-15681937D01* +X11132085Y-15624794D02* +X11036847Y-15624794D01* +X11036847Y-15624794D02* +X11027323Y-15720032D01* +X11027323Y-15720032D02* +X11036847Y-15710508D01* +X11036847Y-15710508D02* +X11055894Y-15700984D01* +X11055894Y-15700984D02* +X11103514Y-15700984D01* +X11103514Y-15700984D02* +X11122561Y-15710508D01* +X11122561Y-15710508D02* +X11132085Y-15720032D01* +X11132085Y-15720032D02* +X11141609Y-15739079D01* +X11141609Y-15739079D02* +X11141609Y-15786698D01* +X11141609Y-15786698D02* +X11132085Y-15805746D01* +X11132085Y-15805746D02* +X11122561Y-15815270D01* +X11122561Y-15815270D02* +X11103514Y-15824794D01* +X11103514Y-15824794D02* +X11055894Y-15824794D01* +X11055894Y-15824794D02* +X11036847Y-15815270D01* +X11036847Y-15815270D02* +X11027323Y-15805746D01* +X11217799Y-15624794D02* +X11217799Y-15662889D01* +X11293990Y-15624794D02* +X11293990Y-15662889D01* +X11589228Y-15900984D02* +X11579704Y-15891460D01* +X11579704Y-15891460D02* +X11560656Y-15862889D01* +X11560656Y-15862889D02* +X11551133Y-15843841D01* +X11551133Y-15843841D02* +X11541609Y-15815270D01* +X11541609Y-15815270D02* +X11532085Y-15767651D01* +X11532085Y-15767651D02* +X11532085Y-15729556D01* +X11532085Y-15729556D02* +X11541609Y-15681937D01* +X11541609Y-15681937D02* +X11551133Y-15653365D01* +X11551133Y-15653365D02* +X11560656Y-15634318D01* +X11560656Y-15634318D02* +X11579704Y-15605746D01* +X11579704Y-15605746D02* +X11589228Y-15596222D01* +X11655894Y-15643841D02* +X11665418Y-15634318D01* +X11665418Y-15634318D02* +X11684466Y-15624794D01* +X11684466Y-15624794D02* +X11732085Y-15624794D01* +X11732085Y-15624794D02* +X11751133Y-15634318D01* +X11751133Y-15634318D02* +X11760656Y-15643841D01* +X11760656Y-15643841D02* +X11770180Y-15662889D01* +X11770180Y-15662889D02* +X11770180Y-15681937D01* +X11770180Y-15681937D02* +X11760656Y-15710508D01* +X11760656Y-15710508D02* +X11646371Y-15824794D01* +X11646371Y-15824794D02* +X11770180Y-15824794D01* +X11893990Y-15624794D02* +X11913037Y-15624794D01* +X11913037Y-15624794D02* +X11932085Y-15634318D01* +X11932085Y-15634318D02* +X11941609Y-15643841D01* +X11941609Y-15643841D02* +X11951133Y-15662889D01* +X11951133Y-15662889D02* +X11960656Y-15700984D01* +X11960656Y-15700984D02* +X11960656Y-15748603D01* +X11960656Y-15748603D02* +X11951133Y-15786698D01* +X11951133Y-15786698D02* +X11941609Y-15805746D01* +X11941609Y-15805746D02* +X11932085Y-15815270D01* +X11932085Y-15815270D02* +X11913037Y-15824794D01* +X11913037Y-15824794D02* +X11893990Y-15824794D01* +X11893990Y-15824794D02* +X11874942Y-15815270D01* +X11874942Y-15815270D02* +X11865418Y-15805746D01* +X11865418Y-15805746D02* +X11855894Y-15786698D01* +X11855894Y-15786698D02* +X11846371Y-15748603D01* +X11846371Y-15748603D02* +X11846371Y-15700984D01* +X11846371Y-15700984D02* +X11855894Y-15662889D01* +X11855894Y-15662889D02* +X11865418Y-15643841D01* +X11865418Y-15643841D02* +X11874942Y-15634318D01* +X11874942Y-15634318D02* +X11893990Y-15624794D01* +X12198752Y-15824794D02* +X12198752Y-15624794D01* +X12284466Y-15824794D02* +X12284466Y-15720032D01* +X12284466Y-15720032D02* +X12274942Y-15700984D01* +X12274942Y-15700984D02* +X12255895Y-15691460D01* +X12255895Y-15691460D02* +X12227323Y-15691460D01* +X12227323Y-15691460D02* +X12208275Y-15700984D01* +X12208275Y-15700984D02* +X12198752Y-15710508D01* +X12408275Y-15824794D02* +X12389228Y-15815270D01* +X12389228Y-15815270D02* +X12379704Y-15805746D01* +X12379704Y-15805746D02* +X12370180Y-15786698D01* +X12370180Y-15786698D02* +X12370180Y-15729556D01* +X12370180Y-15729556D02* +X12379704Y-15710508D01* +X12379704Y-15710508D02* +X12389228Y-15700984D01* +X12389228Y-15700984D02* +X12408275Y-15691460D01* +X12408275Y-15691460D02* +X12436847Y-15691460D01* +X12436847Y-15691460D02* +X12455895Y-15700984D01* +X12455895Y-15700984D02* +X12465418Y-15710508D01* +X12465418Y-15710508D02* +X12474942Y-15729556D01* +X12474942Y-15729556D02* +X12474942Y-15786698D01* +X12474942Y-15786698D02* +X12465418Y-15805746D01* +X12465418Y-15805746D02* +X12455895Y-15815270D01* +X12455895Y-15815270D02* +X12436847Y-15824794D01* +X12436847Y-15824794D02* +X12408275Y-15824794D01* +X12589228Y-15824794D02* +X12570180Y-15815270D01* +X12570180Y-15815270D02* +X12560656Y-15796222D01* +X12560656Y-15796222D02* +X12560656Y-15624794D01* +X12741609Y-15815270D02* +X12722561Y-15824794D01* +X12722561Y-15824794D02* +X12684466Y-15824794D01* +X12684466Y-15824794D02* +X12665418Y-15815270D01* +X12665418Y-15815270D02* +X12655895Y-15796222D01* +X12655895Y-15796222D02* +X12655895Y-15720032D01* +X12655895Y-15720032D02* +X12665418Y-15700984D01* +X12665418Y-15700984D02* +X12684466Y-15691460D01* +X12684466Y-15691460D02* +X12722561Y-15691460D01* +X12722561Y-15691460D02* +X12741609Y-15700984D01* +X12741609Y-15700984D02* +X12751133Y-15720032D01* +X12751133Y-15720032D02* +X12751133Y-15739079D01* +X12751133Y-15739079D02* +X12655895Y-15758127D01* +X12827323Y-15815270D02* +X12846371Y-15824794D01* +X12846371Y-15824794D02* +X12884466Y-15824794D01* +X12884466Y-15824794D02* +X12903514Y-15815270D01* +X12903514Y-15815270D02* +X12913037Y-15796222D01* +X12913037Y-15796222D02* +X12913037Y-15786698D01* +X12913037Y-15786698D02* +X12903514Y-15767651D01* +X12903514Y-15767651D02* +X12884466Y-15758127D01* +X12884466Y-15758127D02* +X12855895Y-15758127D01* +X12855895Y-15758127D02* +X12836847Y-15748603D01* +X12836847Y-15748603D02* +X12827323Y-15729556D01* +X12827323Y-15729556D02* +X12827323Y-15720032D01* +X12827323Y-15720032D02* +X12836847Y-15700984D01* +X12836847Y-15700984D02* +X12855895Y-15691460D01* +X12855895Y-15691460D02* +X12884466Y-15691460D01* +X12884466Y-15691460D02* +X12903514Y-15700984D01* +X12979704Y-15900984D02* +X12989228Y-15891460D01* +X12989228Y-15891460D02* +X13008276Y-15862889D01* +X13008276Y-15862889D02* +X13017799Y-15843841D01* +X13017799Y-15843841D02* +X13027323Y-15815270D01* +X13027323Y-15815270D02* +X13036847Y-15767651D01* +X13036847Y-15767651D02* +X13036847Y-15729556D01* +X13036847Y-15729556D02* +X13027323Y-15681937D01* +X13027323Y-15681937D02* +X13017799Y-15653365D01* +X13017799Y-15653365D02* +X13008276Y-15634318D01* +X13008276Y-15634318D02* +X12989228Y-15605746D01* +X12989228Y-15605746D02* +X12979704Y-15596222D01* +D10* +X7919165Y-15949810D02* +X8014165Y-16044810D01* +X8014165Y-15949810D02* +X7919165Y-16044810D01* +X8014165Y-15997310D02* +G75* +G02* +X7919165Y-15997310I-47500J0D01* +G01* +X7919165Y-15997310D02* +G75* +G02* +X8014165Y-15997310I47500J0D01* +G01* +D11* +X8313037Y-15888794D02* +X8332085Y-15888794D01* +X8332085Y-15888794D02* +X8351132Y-15898318D01* +X8351132Y-15898318D02* +X8360656Y-15907841D01* +X8360656Y-15907841D02* +X8370180Y-15926889D01* +X8370180Y-15926889D02* +X8379704Y-15964984D01* +X8379704Y-15964984D02* +X8379704Y-16012603D01* +X8379704Y-16012603D02* +X8370180Y-16050698D01* +X8370180Y-16050698D02* +X8360656Y-16069746D01* +X8360656Y-16069746D02* +X8351132Y-16079270D01* +X8351132Y-16079270D02* +X8332085Y-16088794D01* +X8332085Y-16088794D02* +X8313037Y-16088794D01* +X8313037Y-16088794D02* +X8293989Y-16079270D01* +X8293989Y-16079270D02* +X8284466Y-16069746D01* +X8284466Y-16069746D02* +X8274942Y-16050698D01* +X8274942Y-16050698D02* +X8265418Y-16012603D01* +X8265418Y-16012603D02* +X8265418Y-15964984D01* +X8265418Y-15964984D02* +X8274942Y-15926889D01* +X8274942Y-15926889D02* +X8284466Y-15907841D01* +X8284466Y-15907841D02* +X8293989Y-15898318D01* +X8293989Y-15898318D02* +X8313037Y-15888794D01* +X8465418Y-16069746D02* +X8474942Y-16079270D01* +X8474942Y-16079270D02* +X8465418Y-16088794D01* +X8465418Y-16088794D02* +X8455894Y-16079270D01* +X8455894Y-16079270D02* +X8465418Y-16069746D01* +X8465418Y-16069746D02* +X8465418Y-16088794D01* +X8570180Y-16088794D02* +X8608275Y-16088794D01* +X8608275Y-16088794D02* +X8627323Y-16079270D01* +X8627323Y-16079270D02* +X8636847Y-16069746D01* +X8636847Y-16069746D02* +X8655894Y-16041175D01* +X8655894Y-16041175D02* +X8665418Y-16003079D01* +X8665418Y-16003079D02* +X8665418Y-15926889D01* +X8665418Y-15926889D02* +X8655894Y-15907841D01* +X8655894Y-15907841D02* +X8646370Y-15898318D01* +X8646370Y-15898318D02* +X8627323Y-15888794D01* +X8627323Y-15888794D02* +X8589228Y-15888794D01* +X8589228Y-15888794D02* +X8570180Y-15898318D01* +X8570180Y-15898318D02* +X8560656Y-15907841D01* +X8560656Y-15907841D02* +X8551132Y-15926889D01* +X8551132Y-15926889D02* +X8551132Y-15974508D01* +X8551132Y-15974508D02* +X8560656Y-15993556D01* +X8560656Y-15993556D02* +X8570180Y-16003079D01* +X8570180Y-16003079D02* +X8589228Y-16012603D01* +X8589228Y-16012603D02* +X8627323Y-16012603D01* +X8627323Y-16012603D02* +X8646370Y-16003079D01* +X8646370Y-16003079D02* +X8655894Y-15993556D01* +X8655894Y-15993556D02* +X8665418Y-15974508D01* +X8846370Y-15888794D02* +X8751132Y-15888794D01* +X8751132Y-15888794D02* +X8741609Y-15984032D01* +X8741609Y-15984032D02* +X8751132Y-15974508D01* +X8751132Y-15974508D02* +X8770180Y-15964984D01* +X8770180Y-15964984D02* +X8817799Y-15964984D01* +X8817799Y-15964984D02* +X8836847Y-15974508D01* +X8836847Y-15974508D02* +X8846370Y-15984032D01* +X8846370Y-15984032D02* +X8855894Y-16003079D01* +X8855894Y-16003079D02* +X8855894Y-16050698D01* +X8855894Y-16050698D02* +X8846370Y-16069746D01* +X8846370Y-16069746D02* +X8836847Y-16079270D01* +X8836847Y-16079270D02* +X8817799Y-16088794D01* +X8817799Y-16088794D02* +X8770180Y-16088794D01* +X8770180Y-16088794D02* +X8751132Y-16079270D01* +X8751132Y-16079270D02* +X8741609Y-16069746D01* +X8979704Y-15888794D02* +X8998751Y-15888794D01* +X8998751Y-15888794D02* +X9017799Y-15898318D01* +X9017799Y-15898318D02* +X9027323Y-15907841D01* +X9027323Y-15907841D02* +X9036847Y-15926889D01* +X9036847Y-15926889D02* +X9046370Y-15964984D01* +X9046370Y-15964984D02* +X9046370Y-16012603D01* +X9046370Y-16012603D02* +X9036847Y-16050698D01* +X9036847Y-16050698D02* +X9027323Y-16069746D01* +X9027323Y-16069746D02* +X9017799Y-16079270D01* +X9017799Y-16079270D02* +X8998751Y-16088794D01* +X8998751Y-16088794D02* +X8979704Y-16088794D01* +X8979704Y-16088794D02* +X8960656Y-16079270D01* +X8960656Y-16079270D02* +X8951132Y-16069746D01* +X8951132Y-16069746D02* +X8941609Y-16050698D01* +X8941609Y-16050698D02* +X8932085Y-16012603D01* +X8932085Y-16012603D02* +X8932085Y-15964984D01* +X8932085Y-15964984D02* +X8941609Y-15926889D01* +X8941609Y-15926889D02* +X8951132Y-15907841D01* +X8951132Y-15907841D02* +X8960656Y-15898318D01* +X8960656Y-15898318D02* +X8979704Y-15888794D01* +X9132085Y-16088794D02* +X9132085Y-15955460D01* +X9132085Y-15974508D02* +X9141609Y-15964984D01* +X9141609Y-15964984D02* +X9160656Y-15955460D01* +X9160656Y-15955460D02* +X9189228Y-15955460D01* +X9189228Y-15955460D02* +X9208275Y-15964984D01* +X9208275Y-15964984D02* +X9217799Y-15984032D01* +X9217799Y-15984032D02* +X9217799Y-16088794D01* +X9217799Y-15984032D02* +X9227323Y-15964984D01* +X9227323Y-15964984D02* +X9246370Y-15955460D01* +X9246370Y-15955460D02* +X9274942Y-15955460D01* +X9274942Y-15955460D02* +X9293990Y-15964984D01* +X9293990Y-15964984D02* +X9303513Y-15984032D01* +X9303513Y-15984032D02* +X9303513Y-16088794D01* +X9398751Y-16088794D02* +X9398751Y-15955460D01* +X9398751Y-15974508D02* +X9408275Y-15964984D01* +X9408275Y-15964984D02* +X9427323Y-15955460D01* +X9427323Y-15955460D02* +X9455894Y-15955460D01* +X9455894Y-15955460D02* +X9474942Y-15964984D01* +X9474942Y-15964984D02* +X9484466Y-15984032D01* +X9484466Y-15984032D02* +X9484466Y-16088794D01* +X9484466Y-15984032D02* +X9493990Y-15964984D01* +X9493990Y-15964984D02* +X9513037Y-15955460D01* +X9513037Y-15955460D02* +X9541609Y-15955460D01* +X9541609Y-15955460D02* +X9560656Y-15964984D01* +X9560656Y-15964984D02* +X9570180Y-15984032D01* +X9570180Y-15984032D02* +X9570180Y-16088794D01* +X9960656Y-15879270D02* +X9789228Y-16136413D01* +X10217799Y-15888794D02* +X10236847Y-15888794D01* +X10236847Y-15888794D02* +X10255894Y-15898318D01* +X10255894Y-15898318D02* +X10265418Y-15907841D01* +X10265418Y-15907841D02* +X10274942Y-15926889D01* +X10274942Y-15926889D02* +X10284466Y-15964984D01* +X10284466Y-15964984D02* +X10284466Y-16012603D01* +X10284466Y-16012603D02* +X10274942Y-16050698D01* +X10274942Y-16050698D02* +X10265418Y-16069746D01* +X10265418Y-16069746D02* +X10255894Y-16079270D01* +X10255894Y-16079270D02* +X10236847Y-16088794D01* +X10236847Y-16088794D02* +X10217799Y-16088794D01* +X10217799Y-16088794D02* +X10198752Y-16079270D01* +X10198752Y-16079270D02* +X10189228Y-16069746D01* +X10189228Y-16069746D02* +X10179704Y-16050698D01* +X10179704Y-16050698D02* +X10170180Y-16012603D01* +X10170180Y-16012603D02* +X10170180Y-15964984D01* +X10170180Y-15964984D02* +X10179704Y-15926889D01* +X10179704Y-15926889D02* +X10189228Y-15907841D01* +X10189228Y-15907841D02* +X10198752Y-15898318D01* +X10198752Y-15898318D02* +X10217799Y-15888794D01* +X10370180Y-16069746D02* +X10379704Y-16079270D01* +X10379704Y-16079270D02* +X10370180Y-16088794D01* +X10370180Y-16088794D02* +X10360656Y-16079270D01* +X10360656Y-16079270D02* +X10370180Y-16069746D01* +X10370180Y-16069746D02* +X10370180Y-16088794D01* +X10503513Y-15888794D02* +X10522561Y-15888794D01* +X10522561Y-15888794D02* +X10541609Y-15898318D01* +X10541609Y-15898318D02* +X10551133Y-15907841D01* +X10551133Y-15907841D02* +X10560656Y-15926889D01* +X10560656Y-15926889D02* +X10570180Y-15964984D01* +X10570180Y-15964984D02* +X10570180Y-16012603D01* +X10570180Y-16012603D02* +X10560656Y-16050698D01* +X10560656Y-16050698D02* +X10551133Y-16069746D01* +X10551133Y-16069746D02* +X10541609Y-16079270D01* +X10541609Y-16079270D02* +X10522561Y-16088794D01* +X10522561Y-16088794D02* +X10503513Y-16088794D01* +X10503513Y-16088794D02* +X10484466Y-16079270D01* +X10484466Y-16079270D02* +X10474942Y-16069746D01* +X10474942Y-16069746D02* +X10465418Y-16050698D01* +X10465418Y-16050698D02* +X10455894Y-16012603D01* +X10455894Y-16012603D02* +X10455894Y-15964984D01* +X10455894Y-15964984D02* +X10465418Y-15926889D01* +X10465418Y-15926889D02* +X10474942Y-15907841D01* +X10474942Y-15907841D02* +X10484466Y-15898318D01* +X10484466Y-15898318D02* +X10503513Y-15888794D01* +X10636847Y-15888794D02* +X10760656Y-15888794D01* +X10760656Y-15888794D02* +X10693990Y-15964984D01* +X10693990Y-15964984D02* +X10722561Y-15964984D01* +X10722561Y-15964984D02* +X10741609Y-15974508D01* +X10741609Y-15974508D02* +X10751133Y-15984032D01* +X10751133Y-15984032D02* +X10760656Y-16003079D01* +X10760656Y-16003079D02* +X10760656Y-16050698D01* +X10760656Y-16050698D02* +X10751133Y-16069746D01* +X10751133Y-16069746D02* +X10741609Y-16079270D01* +X10741609Y-16079270D02* +X10722561Y-16088794D01* +X10722561Y-16088794D02* +X10665418Y-16088794D01* +X10665418Y-16088794D02* +X10646371Y-16079270D01* +X10646371Y-16079270D02* +X10636847Y-16069746D01* +X10827323Y-15888794D02* +X10960656Y-15888794D01* +X10960656Y-15888794D02* +X10874942Y-16088794D01* +X11122561Y-15955460D02* +X11122561Y-16088794D01* +X11074942Y-15879270D02* +X11027323Y-16022127D01* +X11027323Y-16022127D02* +X11151133Y-16022127D01* +X11217799Y-15888794D02* +X11217799Y-15926889D01* +X11293990Y-15888794D02* +X11293990Y-15926889D01* +X11589228Y-16164984D02* +X11579704Y-16155460D01* +X11579704Y-16155460D02* +X11560656Y-16126889D01* +X11560656Y-16126889D02* +X11551133Y-16107841D01* +X11551133Y-16107841D02* +X11541609Y-16079270D01* +X11541609Y-16079270D02* +X11532085Y-16031651D01* +X11532085Y-16031651D02* +X11532085Y-15993556D01* +X11532085Y-15993556D02* +X11541609Y-15945937D01* +X11541609Y-15945937D02* +X11551133Y-15917365D01* +X11551133Y-15917365D02* +X11560656Y-15898318D01* +X11560656Y-15898318D02* +X11579704Y-15869746D01* +X11579704Y-15869746D02* +X11589228Y-15860222D01* +X11770180Y-16088794D02* +X11655894Y-16088794D01* +X11713037Y-16088794D02* +X11713037Y-15888794D01* +X11713037Y-15888794D02* +X11693990Y-15917365D01* +X11693990Y-15917365D02* +X11674942Y-15936413D01* +X11674942Y-15936413D02* +X11655894Y-15945937D01* +X11884466Y-15974508D02* +X11865418Y-15964984D01* +X11865418Y-15964984D02* +X11855894Y-15955460D01* +X11855894Y-15955460D02* +X11846371Y-15936413D01* +X11846371Y-15936413D02* +X11846371Y-15926889D01* +X11846371Y-15926889D02* +X11855894Y-15907841D01* +X11855894Y-15907841D02* +X11865418Y-15898318D01* +X11865418Y-15898318D02* +X11884466Y-15888794D01* +X11884466Y-15888794D02* +X11922561Y-15888794D01* +X11922561Y-15888794D02* +X11941609Y-15898318D01* +X11941609Y-15898318D02* +X11951133Y-15907841D01* +X11951133Y-15907841D02* +X11960656Y-15926889D01* +X11960656Y-15926889D02* +X11960656Y-15936413D01* +X11960656Y-15936413D02* +X11951133Y-15955460D01* +X11951133Y-15955460D02* +X11941609Y-15964984D01* +X11941609Y-15964984D02* +X11922561Y-15974508D01* +X11922561Y-15974508D02* +X11884466Y-15974508D01* +X11884466Y-15974508D02* +X11865418Y-15984032D01* +X11865418Y-15984032D02* +X11855894Y-15993556D01* +X11855894Y-15993556D02* +X11846371Y-16012603D01* +X11846371Y-16012603D02* +X11846371Y-16050698D01* +X11846371Y-16050698D02* +X11855894Y-16069746D01* +X11855894Y-16069746D02* +X11865418Y-16079270D01* +X11865418Y-16079270D02* +X11884466Y-16088794D01* +X11884466Y-16088794D02* +X11922561Y-16088794D01* +X11922561Y-16088794D02* +X11941609Y-16079270D01* +X11941609Y-16079270D02* +X11951133Y-16069746D01* +X11951133Y-16069746D02* +X11960656Y-16050698D01* +X11960656Y-16050698D02* +X11960656Y-16012603D01* +X11960656Y-16012603D02* +X11951133Y-15993556D01* +X11951133Y-15993556D02* +X11941609Y-15984032D01* +X11941609Y-15984032D02* +X11922561Y-15974508D01* +X12198752Y-16088794D02* +X12198752Y-15888794D01* +X12284466Y-16088794D02* +X12284466Y-15984032D01* +X12284466Y-15984032D02* +X12274942Y-15964984D01* +X12274942Y-15964984D02* +X12255895Y-15955460D01* +X12255895Y-15955460D02* +X12227323Y-15955460D01* +X12227323Y-15955460D02* +X12208275Y-15964984D01* +X12208275Y-15964984D02* +X12198752Y-15974508D01* +X12408275Y-16088794D02* +X12389228Y-16079270D01* +X12389228Y-16079270D02* +X12379704Y-16069746D01* +X12379704Y-16069746D02* +X12370180Y-16050698D01* +X12370180Y-16050698D02* +X12370180Y-15993556D01* +X12370180Y-15993556D02* +X12379704Y-15974508D01* +X12379704Y-15974508D02* +X12389228Y-15964984D01* +X12389228Y-15964984D02* +X12408275Y-15955460D01* +X12408275Y-15955460D02* +X12436847Y-15955460D01* +X12436847Y-15955460D02* +X12455895Y-15964984D01* +X12455895Y-15964984D02* +X12465418Y-15974508D01* +X12465418Y-15974508D02* +X12474942Y-15993556D01* +X12474942Y-15993556D02* +X12474942Y-16050698D01* +X12474942Y-16050698D02* +X12465418Y-16069746D01* +X12465418Y-16069746D02* +X12455895Y-16079270D01* +X12455895Y-16079270D02* +X12436847Y-16088794D01* +X12436847Y-16088794D02* +X12408275Y-16088794D01* +X12589228Y-16088794D02* +X12570180Y-16079270D01* +X12570180Y-16079270D02* +X12560656Y-16060222D01* +X12560656Y-16060222D02* +X12560656Y-15888794D01* +X12741609Y-16079270D02* +X12722561Y-16088794D01* +X12722561Y-16088794D02* +X12684466Y-16088794D01* +X12684466Y-16088794D02* +X12665418Y-16079270D01* +X12665418Y-16079270D02* +X12655895Y-16060222D01* +X12655895Y-16060222D02* +X12655895Y-15984032D01* +X12655895Y-15984032D02* +X12665418Y-15964984D01* +X12665418Y-15964984D02* +X12684466Y-15955460D01* +X12684466Y-15955460D02* +X12722561Y-15955460D01* +X12722561Y-15955460D02* +X12741609Y-15964984D01* +X12741609Y-15964984D02* +X12751133Y-15984032D01* +X12751133Y-15984032D02* +X12751133Y-16003079D01* +X12751133Y-16003079D02* +X12655895Y-16022127D01* +X12827323Y-16079270D02* +X12846371Y-16088794D01* +X12846371Y-16088794D02* +X12884466Y-16088794D01* +X12884466Y-16088794D02* +X12903514Y-16079270D01* +X12903514Y-16079270D02* +X12913037Y-16060222D01* +X12913037Y-16060222D02* +X12913037Y-16050698D01* +X12913037Y-16050698D02* +X12903514Y-16031651D01* +X12903514Y-16031651D02* +X12884466Y-16022127D01* +X12884466Y-16022127D02* +X12855895Y-16022127D01* +X12855895Y-16022127D02* +X12836847Y-16012603D01* +X12836847Y-16012603D02* +X12827323Y-15993556D01* +X12827323Y-15993556D02* +X12827323Y-15984032D01* +X12827323Y-15984032D02* +X12836847Y-15964984D01* +X12836847Y-15964984D02* +X12855895Y-15955460D01* +X12855895Y-15955460D02* +X12884466Y-15955460D01* +X12884466Y-15955460D02* +X12903514Y-15964984D01* +X12979704Y-16164984D02* +X12989228Y-16155460D01* +X12989228Y-16155460D02* +X13008276Y-16126889D01* +X13008276Y-16126889D02* +X13017799Y-16107841D01* +X13017799Y-16107841D02* +X13027323Y-16079270D01* +X13027323Y-16079270D02* +X13036847Y-16031651D01* +X13036847Y-16031651D02* +X13036847Y-15993556D01* +X13036847Y-15993556D02* +X13027323Y-15945937D01* +X13027323Y-15945937D02* +X13017799Y-15917365D01* +X13017799Y-15917365D02* +X13008276Y-15898318D01* +X13008276Y-15898318D02* +X12989228Y-15869746D01* +X12989228Y-15869746D02* +X12979704Y-15860222D01* +D10* +X7914165Y-16211310D02* +X8014165Y-16311310D01* +X8014165Y-16211310D02* +X7914165Y-16311310D01* +X7964165Y-16211310D02* +X7964165Y-16311310D01* +X7914165Y-16261310D02* +X8014165Y-16261310D01* +D11* +X8379704Y-16352794D02* +X8265418Y-16352794D01* +X8322561Y-16352794D02* +X8322561Y-16152794D01* +X8322561Y-16152794D02* +X8303513Y-16181365D01* +X8303513Y-16181365D02* +X8284466Y-16200413D01* +X8284466Y-16200413D02* +X8265418Y-16209937D01* +X8465418Y-16333746D02* +X8474942Y-16343270D01* +X8474942Y-16343270D02* +X8465418Y-16352794D01* +X8465418Y-16352794D02* +X8455894Y-16343270D01* +X8455894Y-16343270D02* +X8465418Y-16333746D01* +X8465418Y-16333746D02* +X8465418Y-16352794D01* +X8598751Y-16152794D02* +X8617799Y-16152794D01* +X8617799Y-16152794D02* +X8636847Y-16162318D01* +X8636847Y-16162318D02* +X8646370Y-16171841D01* +X8646370Y-16171841D02* +X8655894Y-16190889D01* +X8655894Y-16190889D02* +X8665418Y-16228984D01* +X8665418Y-16228984D02* +X8665418Y-16276603D01* +X8665418Y-16276603D02* +X8655894Y-16314698D01* +X8655894Y-16314698D02* +X8646370Y-16333746D01* +X8646370Y-16333746D02* +X8636847Y-16343270D01* +X8636847Y-16343270D02* +X8617799Y-16352794D01* +X8617799Y-16352794D02* +X8598751Y-16352794D01* +X8598751Y-16352794D02* +X8579704Y-16343270D01* +X8579704Y-16343270D02* +X8570180Y-16333746D01* +X8570180Y-16333746D02* +X8560656Y-16314698D01* +X8560656Y-16314698D02* +X8551132Y-16276603D01* +X8551132Y-16276603D02* +X8551132Y-16228984D01* +X8551132Y-16228984D02* +X8560656Y-16190889D01* +X8560656Y-16190889D02* +X8570180Y-16171841D01* +X8570180Y-16171841D02* +X8579704Y-16162318D01* +X8579704Y-16162318D02* +X8598751Y-16152794D01* +X8789228Y-16152794D02* +X8808275Y-16152794D01* +X8808275Y-16152794D02* +X8827323Y-16162318D01* +X8827323Y-16162318D02* +X8836847Y-16171841D01* +X8836847Y-16171841D02* +X8846370Y-16190889D01* +X8846370Y-16190889D02* +X8855894Y-16228984D01* +X8855894Y-16228984D02* +X8855894Y-16276603D01* +X8855894Y-16276603D02* +X8846370Y-16314698D01* +X8846370Y-16314698D02* +X8836847Y-16333746D01* +X8836847Y-16333746D02* +X8827323Y-16343270D01* +X8827323Y-16343270D02* +X8808275Y-16352794D01* +X8808275Y-16352794D02* +X8789228Y-16352794D01* +X8789228Y-16352794D02* +X8770180Y-16343270D01* +X8770180Y-16343270D02* +X8760656Y-16333746D01* +X8760656Y-16333746D02* +X8751132Y-16314698D01* +X8751132Y-16314698D02* +X8741609Y-16276603D01* +X8741609Y-16276603D02* +X8741609Y-16228984D01* +X8741609Y-16228984D02* +X8751132Y-16190889D01* +X8751132Y-16190889D02* +X8760656Y-16171841D01* +X8760656Y-16171841D02* +X8770180Y-16162318D01* +X8770180Y-16162318D02* +X8789228Y-16152794D01* +X8979704Y-16152794D02* +X8998751Y-16152794D01* +X8998751Y-16152794D02* +X9017799Y-16162318D01* +X9017799Y-16162318D02* +X9027323Y-16171841D01* +X9027323Y-16171841D02* +X9036847Y-16190889D01* +X9036847Y-16190889D02* +X9046370Y-16228984D01* +X9046370Y-16228984D02* +X9046370Y-16276603D01* +X9046370Y-16276603D02* +X9036847Y-16314698D01* +X9036847Y-16314698D02* +X9027323Y-16333746D01* +X9027323Y-16333746D02* +X9017799Y-16343270D01* +X9017799Y-16343270D02* +X8998751Y-16352794D01* +X8998751Y-16352794D02* +X8979704Y-16352794D01* +X8979704Y-16352794D02* +X8960656Y-16343270D01* +X8960656Y-16343270D02* +X8951132Y-16333746D01* +X8951132Y-16333746D02* +X8941609Y-16314698D01* +X8941609Y-16314698D02* +X8932085Y-16276603D01* +X8932085Y-16276603D02* +X8932085Y-16228984D01* +X8932085Y-16228984D02* +X8941609Y-16190889D01* +X8941609Y-16190889D02* +X8951132Y-16171841D01* +X8951132Y-16171841D02* +X8960656Y-16162318D01* +X8960656Y-16162318D02* +X8979704Y-16152794D01* +X9132085Y-16352794D02* +X9132085Y-16219460D01* +X9132085Y-16238508D02* +X9141609Y-16228984D01* +X9141609Y-16228984D02* +X9160656Y-16219460D01* +X9160656Y-16219460D02* +X9189228Y-16219460D01* +X9189228Y-16219460D02* +X9208275Y-16228984D01* +X9208275Y-16228984D02* +X9217799Y-16248032D01* +X9217799Y-16248032D02* +X9217799Y-16352794D01* +X9217799Y-16248032D02* +X9227323Y-16228984D01* +X9227323Y-16228984D02* +X9246370Y-16219460D01* +X9246370Y-16219460D02* +X9274942Y-16219460D01* +X9274942Y-16219460D02* +X9293990Y-16228984D01* +X9293990Y-16228984D02* +X9303513Y-16248032D01* +X9303513Y-16248032D02* +X9303513Y-16352794D01* +X9398751Y-16352794D02* +X9398751Y-16219460D01* +X9398751Y-16238508D02* +X9408275Y-16228984D01* +X9408275Y-16228984D02* +X9427323Y-16219460D01* +X9427323Y-16219460D02* +X9455894Y-16219460D01* +X9455894Y-16219460D02* +X9474942Y-16228984D01* +X9474942Y-16228984D02* +X9484466Y-16248032D01* +X9484466Y-16248032D02* +X9484466Y-16352794D01* +X9484466Y-16248032D02* +X9493990Y-16228984D01* +X9493990Y-16228984D02* +X9513037Y-16219460D01* +X9513037Y-16219460D02* +X9541609Y-16219460D01* +X9541609Y-16219460D02* +X9560656Y-16228984D01* +X9560656Y-16228984D02* +X9570180Y-16248032D01* +X9570180Y-16248032D02* +X9570180Y-16352794D01* +X9960656Y-16143270D02* +X9789228Y-16400413D01* +X10217799Y-16152794D02* +X10236847Y-16152794D01* +X10236847Y-16152794D02* +X10255894Y-16162318D01* +X10255894Y-16162318D02* +X10265418Y-16171841D01* +X10265418Y-16171841D02* +X10274942Y-16190889D01* +X10274942Y-16190889D02* +X10284466Y-16228984D01* +X10284466Y-16228984D02* +X10284466Y-16276603D01* +X10284466Y-16276603D02* +X10274942Y-16314698D01* +X10274942Y-16314698D02* +X10265418Y-16333746D01* +X10265418Y-16333746D02* +X10255894Y-16343270D01* +X10255894Y-16343270D02* +X10236847Y-16352794D01* +X10236847Y-16352794D02* +X10217799Y-16352794D01* +X10217799Y-16352794D02* +X10198752Y-16343270D01* +X10198752Y-16343270D02* +X10189228Y-16333746D01* +X10189228Y-16333746D02* +X10179704Y-16314698D01* +X10179704Y-16314698D02* +X10170180Y-16276603D01* +X10170180Y-16276603D02* +X10170180Y-16228984D01* +X10170180Y-16228984D02* +X10179704Y-16190889D01* +X10179704Y-16190889D02* +X10189228Y-16171841D01* +X10189228Y-16171841D02* +X10198752Y-16162318D01* +X10198752Y-16162318D02* +X10217799Y-16152794D01* +X10370180Y-16333746D02* +X10379704Y-16343270D01* +X10379704Y-16343270D02* +X10370180Y-16352794D01* +X10370180Y-16352794D02* +X10360656Y-16343270D01* +X10360656Y-16343270D02* +X10370180Y-16333746D01* +X10370180Y-16333746D02* +X10370180Y-16352794D01* +X10503513Y-16152794D02* +X10522561Y-16152794D01* +X10522561Y-16152794D02* +X10541609Y-16162318D01* +X10541609Y-16162318D02* +X10551133Y-16171841D01* +X10551133Y-16171841D02* +X10560656Y-16190889D01* +X10560656Y-16190889D02* +X10570180Y-16228984D01* +X10570180Y-16228984D02* +X10570180Y-16276603D01* +X10570180Y-16276603D02* +X10560656Y-16314698D01* +X10560656Y-16314698D02* +X10551133Y-16333746D01* +X10551133Y-16333746D02* +X10541609Y-16343270D01* +X10541609Y-16343270D02* +X10522561Y-16352794D01* +X10522561Y-16352794D02* +X10503513Y-16352794D01* +X10503513Y-16352794D02* +X10484466Y-16343270D01* +X10484466Y-16343270D02* +X10474942Y-16333746D01* +X10474942Y-16333746D02* +X10465418Y-16314698D01* +X10465418Y-16314698D02* +X10455894Y-16276603D01* +X10455894Y-16276603D02* +X10455894Y-16228984D01* +X10455894Y-16228984D02* +X10465418Y-16190889D01* +X10465418Y-16190889D02* +X10474942Y-16171841D01* +X10474942Y-16171841D02* +X10484466Y-16162318D01* +X10484466Y-16162318D02* +X10503513Y-16152794D01* +X10636847Y-16152794D02* +X10760656Y-16152794D01* +X10760656Y-16152794D02* +X10693990Y-16228984D01* +X10693990Y-16228984D02* +X10722561Y-16228984D01* +X10722561Y-16228984D02* +X10741609Y-16238508D01* +X10741609Y-16238508D02* +X10751133Y-16248032D01* +X10751133Y-16248032D02* +X10760656Y-16267079D01* +X10760656Y-16267079D02* +X10760656Y-16314698D01* +X10760656Y-16314698D02* +X10751133Y-16333746D01* +X10751133Y-16333746D02* +X10741609Y-16343270D01* +X10741609Y-16343270D02* +X10722561Y-16352794D01* +X10722561Y-16352794D02* +X10665418Y-16352794D01* +X10665418Y-16352794D02* +X10646371Y-16343270D01* +X10646371Y-16343270D02* +X10636847Y-16333746D01* +X10855894Y-16352794D02* +X10893990Y-16352794D01* +X10893990Y-16352794D02* +X10913037Y-16343270D01* +X10913037Y-16343270D02* +X10922561Y-16333746D01* +X10922561Y-16333746D02* +X10941609Y-16305175D01* +X10941609Y-16305175D02* +X10951133Y-16267079D01* +X10951133Y-16267079D02* +X10951133Y-16190889D01* +X10951133Y-16190889D02* +X10941609Y-16171841D01* +X10941609Y-16171841D02* +X10932085Y-16162318D01* +X10932085Y-16162318D02* +X10913037Y-16152794D01* +X10913037Y-16152794D02* +X10874942Y-16152794D01* +X10874942Y-16152794D02* +X10855894Y-16162318D01* +X10855894Y-16162318D02* +X10846371Y-16171841D01* +X10846371Y-16171841D02* +X10836847Y-16190889D01* +X10836847Y-16190889D02* +X10836847Y-16238508D01* +X10836847Y-16238508D02* +X10846371Y-16257556D01* +X10846371Y-16257556D02* +X10855894Y-16267079D01* +X10855894Y-16267079D02* +X10874942Y-16276603D01* +X10874942Y-16276603D02* +X10913037Y-16276603D01* +X10913037Y-16276603D02* +X10932085Y-16267079D01* +X10932085Y-16267079D02* +X10941609Y-16257556D01* +X10941609Y-16257556D02* +X10951133Y-16238508D01* +X11122561Y-16219460D02* +X11122561Y-16352794D01* +X11074942Y-16143270D02* +X11027323Y-16286127D01* +X11027323Y-16286127D02* +X11151133Y-16286127D01* +X11217799Y-16152794D02* +X11217799Y-16190889D01* +X11293990Y-16152794D02* +X11293990Y-16190889D01* +X11589228Y-16428984D02* +X11579704Y-16419460D01* +X11579704Y-16419460D02* +X11560656Y-16390889D01* +X11560656Y-16390889D02* +X11551133Y-16371841D01* +X11551133Y-16371841D02* +X11541609Y-16343270D01* +X11541609Y-16343270D02* +X11532085Y-16295651D01* +X11532085Y-16295651D02* +X11532085Y-16257556D01* +X11532085Y-16257556D02* +X11541609Y-16209937D01* +X11541609Y-16209937D02* +X11551133Y-16181365D01* +X11551133Y-16181365D02* +X11560656Y-16162318D01* +X11560656Y-16162318D02* +X11579704Y-16133746D01* +X11579704Y-16133746D02* +X11589228Y-16124222D01* +X11674942Y-16352794D02* +X11713037Y-16352794D01* +X11713037Y-16352794D02* +X11732085Y-16343270D01* +X11732085Y-16343270D02* +X11741609Y-16333746D01* +X11741609Y-16333746D02* +X11760656Y-16305175D01* +X11760656Y-16305175D02* +X11770180Y-16267079D01* +X11770180Y-16267079D02* +X11770180Y-16190889D01* +X11770180Y-16190889D02* +X11760656Y-16171841D01* +X11760656Y-16171841D02* +X11751133Y-16162318D01* +X11751133Y-16162318D02* +X11732085Y-16152794D01* +X11732085Y-16152794D02* +X11693990Y-16152794D01* +X11693990Y-16152794D02* +X11674942Y-16162318D01* +X11674942Y-16162318D02* +X11665418Y-16171841D01* +X11665418Y-16171841D02* +X11655894Y-16190889D01* +X11655894Y-16190889D02* +X11655894Y-16238508D01* +X11655894Y-16238508D02* +X11665418Y-16257556D01* +X11665418Y-16257556D02* +X11674942Y-16267079D01* +X11674942Y-16267079D02* +X11693990Y-16276603D01* +X11693990Y-16276603D02* +X11732085Y-16276603D01* +X11732085Y-16276603D02* +X11751133Y-16267079D01* +X11751133Y-16267079D02* +X11760656Y-16257556D01* +X11760656Y-16257556D02* +X11770180Y-16238508D01* +X11960656Y-16352794D02* +X11846371Y-16352794D01* +X11903513Y-16352794D02* +X11903513Y-16152794D01* +X11903513Y-16152794D02* +X11884466Y-16181365D01* +X11884466Y-16181365D02* +X11865418Y-16200413D01* +X11865418Y-16200413D02* +X11846371Y-16209937D01* +X12198752Y-16352794D02* +X12198752Y-16152794D01* +X12284466Y-16352794D02* +X12284466Y-16248032D01* +X12284466Y-16248032D02* +X12274942Y-16228984D01* +X12274942Y-16228984D02* +X12255895Y-16219460D01* +X12255895Y-16219460D02* +X12227323Y-16219460D01* +X12227323Y-16219460D02* +X12208275Y-16228984D01* +X12208275Y-16228984D02* +X12198752Y-16238508D01* +X12408275Y-16352794D02* +X12389228Y-16343270D01* +X12389228Y-16343270D02* +X12379704Y-16333746D01* +X12379704Y-16333746D02* +X12370180Y-16314698D01* +X12370180Y-16314698D02* +X12370180Y-16257556D01* +X12370180Y-16257556D02* +X12379704Y-16238508D01* +X12379704Y-16238508D02* +X12389228Y-16228984D01* +X12389228Y-16228984D02* +X12408275Y-16219460D01* +X12408275Y-16219460D02* +X12436847Y-16219460D01* +X12436847Y-16219460D02* +X12455895Y-16228984D01* +X12455895Y-16228984D02* +X12465418Y-16238508D01* +X12465418Y-16238508D02* +X12474942Y-16257556D01* +X12474942Y-16257556D02* +X12474942Y-16314698D01* +X12474942Y-16314698D02* +X12465418Y-16333746D01* +X12465418Y-16333746D02* +X12455895Y-16343270D01* +X12455895Y-16343270D02* +X12436847Y-16352794D01* +X12436847Y-16352794D02* +X12408275Y-16352794D01* +X12589228Y-16352794D02* +X12570180Y-16343270D01* +X12570180Y-16343270D02* +X12560656Y-16324222D01* +X12560656Y-16324222D02* +X12560656Y-16152794D01* +X12741609Y-16343270D02* +X12722561Y-16352794D01* +X12722561Y-16352794D02* +X12684466Y-16352794D01* +X12684466Y-16352794D02* +X12665418Y-16343270D01* +X12665418Y-16343270D02* +X12655895Y-16324222D01* +X12655895Y-16324222D02* +X12655895Y-16248032D01* +X12655895Y-16248032D02* +X12665418Y-16228984D01* +X12665418Y-16228984D02* +X12684466Y-16219460D01* +X12684466Y-16219460D02* +X12722561Y-16219460D01* +X12722561Y-16219460D02* +X12741609Y-16228984D01* +X12741609Y-16228984D02* +X12751133Y-16248032D01* +X12751133Y-16248032D02* +X12751133Y-16267079D01* +X12751133Y-16267079D02* +X12655895Y-16286127D01* +X12827323Y-16343270D02* +X12846371Y-16352794D01* +X12846371Y-16352794D02* +X12884466Y-16352794D01* +X12884466Y-16352794D02* +X12903514Y-16343270D01* +X12903514Y-16343270D02* +X12913037Y-16324222D01* +X12913037Y-16324222D02* +X12913037Y-16314698D01* +X12913037Y-16314698D02* +X12903514Y-16295651D01* +X12903514Y-16295651D02* +X12884466Y-16286127D01* +X12884466Y-16286127D02* +X12855895Y-16286127D01* +X12855895Y-16286127D02* +X12836847Y-16276603D01* +X12836847Y-16276603D02* +X12827323Y-16257556D01* +X12827323Y-16257556D02* +X12827323Y-16248032D01* +X12827323Y-16248032D02* +X12836847Y-16228984D01* +X12836847Y-16228984D02* +X12855895Y-16219460D01* +X12855895Y-16219460D02* +X12884466Y-16219460D01* +X12884466Y-16219460D02* +X12903514Y-16228984D01* +X12979704Y-16428984D02* +X12989228Y-16419460D01* +X12989228Y-16419460D02* +X13008276Y-16390889D01* +X13008276Y-16390889D02* +X13017799Y-16371841D01* +X13017799Y-16371841D02* +X13027323Y-16343270D01* +X13027323Y-16343270D02* +X13036847Y-16295651D01* +X13036847Y-16295651D02* +X13036847Y-16257556D01* +X13036847Y-16257556D02* +X13027323Y-16209937D01* +X13027323Y-16209937D02* +X13017799Y-16181365D01* +X13017799Y-16181365D02* +X13008276Y-16162318D01* +X13008276Y-16162318D02* +X12989228Y-16133746D01* +X12989228Y-16133746D02* +X12979704Y-16124222D01* +D12* +X7904165Y-16470310D02* +X8014165Y-16580310D01* +X8014165Y-16470310D02* +X7904165Y-16580310D01* +X7998056Y-16564201D02* +X7998056Y-16486419D01* +X7920274Y-16486419D01* +X7920274Y-16564201D01* +X7998056Y-16564201D01* +D11* +X8379704Y-16616794D02* +X8265418Y-16616794D01* +X8322561Y-16616794D02* +X8322561Y-16416794D01* +X8322561Y-16416794D02* +X8303513Y-16445365D01* +X8303513Y-16445365D02* +X8284466Y-16464413D01* +X8284466Y-16464413D02* +X8265418Y-16473937D01* +X8465418Y-16597746D02* +X8474942Y-16607270D01* +X8474942Y-16607270D02* +X8465418Y-16616794D01* +X8465418Y-16616794D02* +X8455894Y-16607270D01* +X8455894Y-16607270D02* +X8465418Y-16597746D01* +X8465418Y-16597746D02* +X8465418Y-16616794D01* +X8665418Y-16616794D02* +X8551132Y-16616794D01* +X8608275Y-16616794D02* +X8608275Y-16416794D01* +X8608275Y-16416794D02* +X8589228Y-16445365D01* +X8589228Y-16445365D02* +X8570180Y-16464413D01* +X8570180Y-16464413D02* +X8551132Y-16473937D01* +X8789228Y-16416794D02* +X8808275Y-16416794D01* +X8808275Y-16416794D02* +X8827323Y-16426318D01* +X8827323Y-16426318D02* +X8836847Y-16435841D01* +X8836847Y-16435841D02* +X8846370Y-16454889D01* +X8846370Y-16454889D02* +X8855894Y-16492984D01* +X8855894Y-16492984D02* +X8855894Y-16540603D01* +X8855894Y-16540603D02* +X8846370Y-16578698D01* +X8846370Y-16578698D02* +X8836847Y-16597746D01* +X8836847Y-16597746D02* +X8827323Y-16607270D01* +X8827323Y-16607270D02* +X8808275Y-16616794D01* +X8808275Y-16616794D02* +X8789228Y-16616794D01* +X8789228Y-16616794D02* +X8770180Y-16607270D01* +X8770180Y-16607270D02* +X8760656Y-16597746D01* +X8760656Y-16597746D02* +X8751132Y-16578698D01* +X8751132Y-16578698D02* +X8741609Y-16540603D01* +X8741609Y-16540603D02* +X8741609Y-16492984D01* +X8741609Y-16492984D02* +X8751132Y-16454889D01* +X8751132Y-16454889D02* +X8760656Y-16435841D01* +X8760656Y-16435841D02* +X8770180Y-16426318D01* +X8770180Y-16426318D02* +X8789228Y-16416794D01* +X8979704Y-16416794D02* +X8998751Y-16416794D01* +X8998751Y-16416794D02* +X9017799Y-16426318D01* +X9017799Y-16426318D02* +X9027323Y-16435841D01* +X9027323Y-16435841D02* +X9036847Y-16454889D01* +X9036847Y-16454889D02* +X9046370Y-16492984D01* +X9046370Y-16492984D02* +X9046370Y-16540603D01* +X9046370Y-16540603D02* +X9036847Y-16578698D01* +X9036847Y-16578698D02* +X9027323Y-16597746D01* +X9027323Y-16597746D02* +X9017799Y-16607270D01* +X9017799Y-16607270D02* +X8998751Y-16616794D01* +X8998751Y-16616794D02* +X8979704Y-16616794D01* +X8979704Y-16616794D02* +X8960656Y-16607270D01* +X8960656Y-16607270D02* +X8951132Y-16597746D01* +X8951132Y-16597746D02* +X8941609Y-16578698D01* +X8941609Y-16578698D02* +X8932085Y-16540603D01* +X8932085Y-16540603D02* +X8932085Y-16492984D01* +X8932085Y-16492984D02* +X8941609Y-16454889D01* +X8941609Y-16454889D02* +X8951132Y-16435841D01* +X8951132Y-16435841D02* +X8960656Y-16426318D01* +X8960656Y-16426318D02* +X8979704Y-16416794D01* +X9132085Y-16616794D02* +X9132085Y-16483460D01* +X9132085Y-16502508D02* +X9141609Y-16492984D01* +X9141609Y-16492984D02* +X9160656Y-16483460D01* +X9160656Y-16483460D02* +X9189228Y-16483460D01* +X9189228Y-16483460D02* +X9208275Y-16492984D01* +X9208275Y-16492984D02* +X9217799Y-16512032D01* +X9217799Y-16512032D02* +X9217799Y-16616794D01* +X9217799Y-16512032D02* +X9227323Y-16492984D01* +X9227323Y-16492984D02* +X9246370Y-16483460D01* +X9246370Y-16483460D02* +X9274942Y-16483460D01* +X9274942Y-16483460D02* +X9293990Y-16492984D01* +X9293990Y-16492984D02* +X9303513Y-16512032D01* +X9303513Y-16512032D02* +X9303513Y-16616794D01* +X9398751Y-16616794D02* +X9398751Y-16483460D01* +X9398751Y-16502508D02* +X9408275Y-16492984D01* +X9408275Y-16492984D02* +X9427323Y-16483460D01* +X9427323Y-16483460D02* +X9455894Y-16483460D01* +X9455894Y-16483460D02* +X9474942Y-16492984D01* +X9474942Y-16492984D02* +X9484466Y-16512032D01* +X9484466Y-16512032D02* +X9484466Y-16616794D01* +X9484466Y-16512032D02* +X9493990Y-16492984D01* +X9493990Y-16492984D02* +X9513037Y-16483460D01* +X9513037Y-16483460D02* +X9541609Y-16483460D01* +X9541609Y-16483460D02* +X9560656Y-16492984D01* +X9560656Y-16492984D02* +X9570180Y-16512032D01* +X9570180Y-16512032D02* +X9570180Y-16616794D01* +X9960656Y-16407270D02* +X9789228Y-16664413D01* +X10217799Y-16416794D02* +X10236847Y-16416794D01* +X10236847Y-16416794D02* +X10255894Y-16426318D01* +X10255894Y-16426318D02* +X10265418Y-16435841D01* +X10265418Y-16435841D02* +X10274942Y-16454889D01* +X10274942Y-16454889D02* +X10284466Y-16492984D01* +X10284466Y-16492984D02* +X10284466Y-16540603D01* +X10284466Y-16540603D02* +X10274942Y-16578698D01* +X10274942Y-16578698D02* +X10265418Y-16597746D01* +X10265418Y-16597746D02* +X10255894Y-16607270D01* +X10255894Y-16607270D02* +X10236847Y-16616794D01* +X10236847Y-16616794D02* +X10217799Y-16616794D01* +X10217799Y-16616794D02* +X10198752Y-16607270D01* +X10198752Y-16607270D02* +X10189228Y-16597746D01* +X10189228Y-16597746D02* +X10179704Y-16578698D01* +X10179704Y-16578698D02* +X10170180Y-16540603D01* +X10170180Y-16540603D02* +X10170180Y-16492984D01* +X10170180Y-16492984D02* +X10179704Y-16454889D01* +X10179704Y-16454889D02* +X10189228Y-16435841D01* +X10189228Y-16435841D02* +X10198752Y-16426318D01* +X10198752Y-16426318D02* +X10217799Y-16416794D01* +X10370180Y-16597746D02* +X10379704Y-16607270D01* +X10379704Y-16607270D02* +X10370180Y-16616794D01* +X10370180Y-16616794D02* +X10360656Y-16607270D01* +X10360656Y-16607270D02* +X10370180Y-16597746D01* +X10370180Y-16597746D02* +X10370180Y-16616794D01* +X10503513Y-16416794D02* +X10522561Y-16416794D01* +X10522561Y-16416794D02* +X10541609Y-16426318D01* +X10541609Y-16426318D02* +X10551133Y-16435841D01* +X10551133Y-16435841D02* +X10560656Y-16454889D01* +X10560656Y-16454889D02* +X10570180Y-16492984D01* +X10570180Y-16492984D02* +X10570180Y-16540603D01* +X10570180Y-16540603D02* +X10560656Y-16578698D01* +X10560656Y-16578698D02* +X10551133Y-16597746D01* +X10551133Y-16597746D02* +X10541609Y-16607270D01* +X10541609Y-16607270D02* +X10522561Y-16616794D01* +X10522561Y-16616794D02* +X10503513Y-16616794D01* +X10503513Y-16616794D02* +X10484466Y-16607270D01* +X10484466Y-16607270D02* +X10474942Y-16597746D01* +X10474942Y-16597746D02* +X10465418Y-16578698D01* +X10465418Y-16578698D02* +X10455894Y-16540603D01* +X10455894Y-16540603D02* +X10455894Y-16492984D01* +X10455894Y-16492984D02* +X10465418Y-16454889D01* +X10465418Y-16454889D02* +X10474942Y-16435841D01* +X10474942Y-16435841D02* +X10484466Y-16426318D01* +X10484466Y-16426318D02* +X10503513Y-16416794D01* +X10741609Y-16483460D02* +X10741609Y-16616794D01* +X10693990Y-16407270D02* +X10646371Y-16550127D01* +X10646371Y-16550127D02* +X10770180Y-16550127D01* +X10827323Y-16416794D02* +X10951133Y-16416794D01* +X10951133Y-16416794D02* +X10884466Y-16492984D01* +X10884466Y-16492984D02* +X10913037Y-16492984D01* +X10913037Y-16492984D02* +X10932085Y-16502508D01* +X10932085Y-16502508D02* +X10941609Y-16512032D01* +X10941609Y-16512032D02* +X10951133Y-16531079D01* +X10951133Y-16531079D02* +X10951133Y-16578698D01* +X10951133Y-16578698D02* +X10941609Y-16597746D01* +X10941609Y-16597746D02* +X10932085Y-16607270D01* +X10932085Y-16607270D02* +X10913037Y-16616794D01* +X10913037Y-16616794D02* +X10855894Y-16616794D01* +X10855894Y-16616794D02* +X10836847Y-16607270D01* +X10836847Y-16607270D02* +X10827323Y-16597746D01* +X11017799Y-16416794D02* +X11141609Y-16416794D01* +X11141609Y-16416794D02* +X11074942Y-16492984D01* +X11074942Y-16492984D02* +X11103514Y-16492984D01* +X11103514Y-16492984D02* +X11122561Y-16502508D01* +X11122561Y-16502508D02* +X11132085Y-16512032D01* +X11132085Y-16512032D02* +X11141609Y-16531079D01* +X11141609Y-16531079D02* +X11141609Y-16578698D01* +X11141609Y-16578698D02* +X11132085Y-16597746D01* +X11132085Y-16597746D02* +X11122561Y-16607270D01* +X11122561Y-16607270D02* +X11103514Y-16616794D01* +X11103514Y-16616794D02* +X11046371Y-16616794D01* +X11046371Y-16616794D02* +X11027323Y-16607270D01* +X11027323Y-16607270D02* +X11017799Y-16597746D01* +X11217799Y-16416794D02* +X11217799Y-16454889D01* +X11293990Y-16416794D02* +X11293990Y-16454889D01* +X11589228Y-16692984D02* +X11579704Y-16683460D01* +X11579704Y-16683460D02* +X11560656Y-16654889D01* +X11560656Y-16654889D02* +X11551133Y-16635841D01* +X11551133Y-16635841D02* +X11541609Y-16607270D01* +X11541609Y-16607270D02* +X11532085Y-16559651D01* +X11532085Y-16559651D02* +X11532085Y-16521556D01* +X11532085Y-16521556D02* +X11541609Y-16473937D01* +X11541609Y-16473937D02* +X11551133Y-16445365D01* +X11551133Y-16445365D02* +X11560656Y-16426318D01* +X11560656Y-16426318D02* +X11579704Y-16397746D01* +X11579704Y-16397746D02* +X11589228Y-16388222D01* +X11751133Y-16483460D02* +X11751133Y-16616794D01* +X11703513Y-16407270D02* +X11655894Y-16550127D01* +X11655894Y-16550127D02* +X11779704Y-16550127D01* +X12008275Y-16616794D02* +X12008275Y-16416794D01* +X12093990Y-16616794D02* +X12093990Y-16512032D01* +X12093990Y-16512032D02* +X12084466Y-16492984D01* +X12084466Y-16492984D02* +X12065418Y-16483460D01* +X12065418Y-16483460D02* +X12036847Y-16483460D01* +X12036847Y-16483460D02* +X12017799Y-16492984D01* +X12017799Y-16492984D02* +X12008275Y-16502508D01* +X12217799Y-16616794D02* +X12198752Y-16607270D01* +X12198752Y-16607270D02* +X12189228Y-16597746D01* +X12189228Y-16597746D02* +X12179704Y-16578698D01* +X12179704Y-16578698D02* +X12179704Y-16521556D01* +X12179704Y-16521556D02* +X12189228Y-16502508D01* +X12189228Y-16502508D02* +X12198752Y-16492984D01* +X12198752Y-16492984D02* +X12217799Y-16483460D01* +X12217799Y-16483460D02* +X12246371Y-16483460D01* +X12246371Y-16483460D02* +X12265418Y-16492984D01* +X12265418Y-16492984D02* +X12274942Y-16502508D01* +X12274942Y-16502508D02* +X12284466Y-16521556D01* +X12284466Y-16521556D02* +X12284466Y-16578698D01* +X12284466Y-16578698D02* +X12274942Y-16597746D01* +X12274942Y-16597746D02* +X12265418Y-16607270D01* +X12265418Y-16607270D02* +X12246371Y-16616794D01* +X12246371Y-16616794D02* +X12217799Y-16616794D01* +X12398752Y-16616794D02* +X12379704Y-16607270D01* +X12379704Y-16607270D02* +X12370180Y-16588222D01* +X12370180Y-16588222D02* +X12370180Y-16416794D01* +X12551133Y-16607270D02* +X12532085Y-16616794D01* +X12532085Y-16616794D02* +X12493990Y-16616794D01* +X12493990Y-16616794D02* +X12474942Y-16607270D01* +X12474942Y-16607270D02* +X12465418Y-16588222D01* +X12465418Y-16588222D02* +X12465418Y-16512032D01* +X12465418Y-16512032D02* +X12474942Y-16492984D01* +X12474942Y-16492984D02* +X12493990Y-16483460D01* +X12493990Y-16483460D02* +X12532085Y-16483460D01* +X12532085Y-16483460D02* +X12551133Y-16492984D01* +X12551133Y-16492984D02* +X12560656Y-16512032D01* +X12560656Y-16512032D02* +X12560656Y-16531079D01* +X12560656Y-16531079D02* +X12465418Y-16550127D01* +X12636847Y-16607270D02* +X12655895Y-16616794D01* +X12655895Y-16616794D02* +X12693990Y-16616794D01* +X12693990Y-16616794D02* +X12713037Y-16607270D01* +X12713037Y-16607270D02* +X12722561Y-16588222D01* +X12722561Y-16588222D02* +X12722561Y-16578698D01* +X12722561Y-16578698D02* +X12713037Y-16559651D01* +X12713037Y-16559651D02* +X12693990Y-16550127D01* +X12693990Y-16550127D02* +X12665418Y-16550127D01* +X12665418Y-16550127D02* +X12646371Y-16540603D01* +X12646371Y-16540603D02* +X12636847Y-16521556D01* +X12636847Y-16521556D02* +X12636847Y-16512032D01* +X12636847Y-16512032D02* +X12646371Y-16492984D01* +X12646371Y-16492984D02* +X12665418Y-16483460D01* +X12665418Y-16483460D02* +X12693990Y-16483460D01* +X12693990Y-16483460D02* +X12713037Y-16492984D01* +X12789228Y-16692984D02* +X12798752Y-16683460D01* +X12798752Y-16683460D02* +X12817799Y-16654889D01* +X12817799Y-16654889D02* +X12827323Y-16635841D01* +X12827323Y-16635841D02* +X12836847Y-16607270D01* +X12836847Y-16607270D02* +X12846371Y-16559651D01* +X12846371Y-16559651D02* +X12846371Y-16521556D01* +X12846371Y-16521556D02* +X12836847Y-16473937D01* +X12836847Y-16473937D02* +X12827323Y-16445365D01* +X12827323Y-16445365D02* +X12817799Y-16426318D01* +X12817799Y-16426318D02* +X12798752Y-16397746D01* +X12798752Y-16397746D02* +X12789228Y-16388222D01* +D13* +X7884165Y-16724310D02* +X8014165Y-16854310D01* +X8014165Y-16724310D02* +X7884165Y-16854310D01* +X7949165Y-16854310D02* +X8014165Y-16789310D01* +X7949165Y-16724310D01* +X7884165Y-16789310D01* +X7949165Y-16854310D01* +D11* +X8379704Y-16880794D02* +X8265418Y-16880794D01* +X8322561Y-16880794D02* +X8322561Y-16680794D01* +X8322561Y-16680794D02* +X8303513Y-16709365D01* +X8303513Y-16709365D02* +X8284466Y-16728413D01* +X8284466Y-16728413D02* +X8265418Y-16737937D01* +X8465418Y-16861746D02* +X8474942Y-16871270D01* +X8474942Y-16871270D02* +X8465418Y-16880794D01* +X8465418Y-16880794D02* +X8455894Y-16871270D01* +X8455894Y-16871270D02* +X8465418Y-16861746D01* +X8465418Y-16861746D02* +X8465418Y-16880794D01* +X8541609Y-16680794D02* +X8665418Y-16680794D01* +X8665418Y-16680794D02* +X8598751Y-16756984D01* +X8598751Y-16756984D02* +X8627323Y-16756984D01* +X8627323Y-16756984D02* +X8646370Y-16766508D01* +X8646370Y-16766508D02* +X8655894Y-16776032D01* +X8655894Y-16776032D02* +X8665418Y-16795080D01* +X8665418Y-16795080D02* +X8665418Y-16842699D01* +X8665418Y-16842699D02* +X8655894Y-16861746D01* +X8655894Y-16861746D02* +X8646370Y-16871270D01* +X8646370Y-16871270D02* +X8627323Y-16880794D01* +X8627323Y-16880794D02* +X8570180Y-16880794D01* +X8570180Y-16880794D02* +X8551132Y-16871270D01* +X8551132Y-16871270D02* +X8541609Y-16861746D01* +X8789228Y-16680794D02* +X8808275Y-16680794D01* +X8808275Y-16680794D02* +X8827323Y-16690318D01* +X8827323Y-16690318D02* +X8836847Y-16699841D01* +X8836847Y-16699841D02* +X8846370Y-16718889D01* +X8846370Y-16718889D02* +X8855894Y-16756984D01* +X8855894Y-16756984D02* +X8855894Y-16804603D01* +X8855894Y-16804603D02* +X8846370Y-16842699D01* +X8846370Y-16842699D02* +X8836847Y-16861746D01* +X8836847Y-16861746D02* +X8827323Y-16871270D01* +X8827323Y-16871270D02* +X8808275Y-16880794D01* +X8808275Y-16880794D02* +X8789228Y-16880794D01* +X8789228Y-16880794D02* +X8770180Y-16871270D01* +X8770180Y-16871270D02* +X8760656Y-16861746D01* +X8760656Y-16861746D02* +X8751132Y-16842699D01* +X8751132Y-16842699D02* +X8741609Y-16804603D01* +X8741609Y-16804603D02* +X8741609Y-16756984D01* +X8741609Y-16756984D02* +X8751132Y-16718889D01* +X8751132Y-16718889D02* +X8760656Y-16699841D01* +X8760656Y-16699841D02* +X8770180Y-16690318D01* +X8770180Y-16690318D02* +X8789228Y-16680794D01* +X8979704Y-16680794D02* +X8998751Y-16680794D01* +X8998751Y-16680794D02* +X9017799Y-16690318D01* +X9017799Y-16690318D02* +X9027323Y-16699841D01* +X9027323Y-16699841D02* +X9036847Y-16718889D01* +X9036847Y-16718889D02* +X9046370Y-16756984D01* +X9046370Y-16756984D02* +X9046370Y-16804603D01* +X9046370Y-16804603D02* +X9036847Y-16842699D01* +X9036847Y-16842699D02* +X9027323Y-16861746D01* +X9027323Y-16861746D02* +X9017799Y-16871270D01* +X9017799Y-16871270D02* +X8998751Y-16880794D01* +X8998751Y-16880794D02* +X8979704Y-16880794D01* +X8979704Y-16880794D02* +X8960656Y-16871270D01* +X8960656Y-16871270D02* +X8951132Y-16861746D01* +X8951132Y-16861746D02* +X8941609Y-16842699D01* +X8941609Y-16842699D02* +X8932085Y-16804603D01* +X8932085Y-16804603D02* +X8932085Y-16756984D01* +X8932085Y-16756984D02* +X8941609Y-16718889D01* +X8941609Y-16718889D02* +X8951132Y-16699841D01* +X8951132Y-16699841D02* +X8960656Y-16690318D01* +X8960656Y-16690318D02* +X8979704Y-16680794D01* +X9132085Y-16880794D02* +X9132085Y-16747460D01* +X9132085Y-16766508D02* +X9141609Y-16756984D01* +X9141609Y-16756984D02* +X9160656Y-16747460D01* +X9160656Y-16747460D02* +X9189228Y-16747460D01* +X9189228Y-16747460D02* +X9208275Y-16756984D01* +X9208275Y-16756984D02* +X9217799Y-16776032D01* +X9217799Y-16776032D02* +X9217799Y-16880794D01* +X9217799Y-16776032D02* +X9227323Y-16756984D01* +X9227323Y-16756984D02* +X9246370Y-16747460D01* +X9246370Y-16747460D02* +X9274942Y-16747460D01* +X9274942Y-16747460D02* +X9293990Y-16756984D01* +X9293990Y-16756984D02* +X9303513Y-16776032D01* +X9303513Y-16776032D02* +X9303513Y-16880794D01* +X9398751Y-16880794D02* +X9398751Y-16747460D01* +X9398751Y-16766508D02* +X9408275Y-16756984D01* +X9408275Y-16756984D02* +X9427323Y-16747460D01* +X9427323Y-16747460D02* +X9455894Y-16747460D01* +X9455894Y-16747460D02* +X9474942Y-16756984D01* +X9474942Y-16756984D02* +X9484466Y-16776032D01* +X9484466Y-16776032D02* +X9484466Y-16880794D01* +X9484466Y-16776032D02* +X9493990Y-16756984D01* +X9493990Y-16756984D02* +X9513037Y-16747460D01* +X9513037Y-16747460D02* +X9541609Y-16747460D01* +X9541609Y-16747460D02* +X9560656Y-16756984D01* +X9560656Y-16756984D02* +X9570180Y-16776032D01* +X9570180Y-16776032D02* +X9570180Y-16880794D01* +X9960656Y-16671270D02* +X9789228Y-16928413D01* +X10217799Y-16680794D02* +X10236847Y-16680794D01* +X10236847Y-16680794D02* +X10255894Y-16690318D01* +X10255894Y-16690318D02* +X10265418Y-16699841D01* +X10265418Y-16699841D02* +X10274942Y-16718889D01* +X10274942Y-16718889D02* +X10284466Y-16756984D01* +X10284466Y-16756984D02* +X10284466Y-16804603D01* +X10284466Y-16804603D02* +X10274942Y-16842699D01* +X10274942Y-16842699D02* +X10265418Y-16861746D01* +X10265418Y-16861746D02* +X10255894Y-16871270D01* +X10255894Y-16871270D02* +X10236847Y-16880794D01* +X10236847Y-16880794D02* +X10217799Y-16880794D01* +X10217799Y-16880794D02* +X10198752Y-16871270D01* +X10198752Y-16871270D02* +X10189228Y-16861746D01* +X10189228Y-16861746D02* +X10179704Y-16842699D01* +X10179704Y-16842699D02* +X10170180Y-16804603D01* +X10170180Y-16804603D02* +X10170180Y-16756984D01* +X10170180Y-16756984D02* +X10179704Y-16718889D01* +X10179704Y-16718889D02* +X10189228Y-16699841D01* +X10189228Y-16699841D02* +X10198752Y-16690318D01* +X10198752Y-16690318D02* +X10217799Y-16680794D01* +X10370180Y-16861746D02* +X10379704Y-16871270D01* +X10379704Y-16871270D02* +X10370180Y-16880794D01* +X10370180Y-16880794D02* +X10360656Y-16871270D01* +X10360656Y-16871270D02* +X10370180Y-16861746D01* +X10370180Y-16861746D02* +X10370180Y-16880794D01* +X10503513Y-16680794D02* +X10522561Y-16680794D01* +X10522561Y-16680794D02* +X10541609Y-16690318D01* +X10541609Y-16690318D02* +X10551133Y-16699841D01* +X10551133Y-16699841D02* +X10560656Y-16718889D01* +X10560656Y-16718889D02* +X10570180Y-16756984D01* +X10570180Y-16756984D02* +X10570180Y-16804603D01* +X10570180Y-16804603D02* +X10560656Y-16842699D01* +X10560656Y-16842699D02* +X10551133Y-16861746D01* +X10551133Y-16861746D02* +X10541609Y-16871270D01* +X10541609Y-16871270D02* +X10522561Y-16880794D01* +X10522561Y-16880794D02* +X10503513Y-16880794D01* +X10503513Y-16880794D02* +X10484466Y-16871270D01* +X10484466Y-16871270D02* +X10474942Y-16861746D01* +X10474942Y-16861746D02* +X10465418Y-16842699D01* +X10465418Y-16842699D02* +X10455894Y-16804603D01* +X10455894Y-16804603D02* +X10455894Y-16756984D01* +X10455894Y-16756984D02* +X10465418Y-16718889D01* +X10465418Y-16718889D02* +X10474942Y-16699841D01* +X10474942Y-16699841D02* +X10484466Y-16690318D01* +X10484466Y-16690318D02* +X10503513Y-16680794D01* +X10751133Y-16680794D02* +X10655894Y-16680794D01* +X10655894Y-16680794D02* +X10646371Y-16776032D01* +X10646371Y-16776032D02* +X10655894Y-16766508D01* +X10655894Y-16766508D02* +X10674942Y-16756984D01* +X10674942Y-16756984D02* +X10722561Y-16756984D01* +X10722561Y-16756984D02* +X10741609Y-16766508D01* +X10741609Y-16766508D02* +X10751133Y-16776032D01* +X10751133Y-16776032D02* +X10760656Y-16795080D01* +X10760656Y-16795080D02* +X10760656Y-16842699D01* +X10760656Y-16842699D02* +X10751133Y-16861746D01* +X10751133Y-16861746D02* +X10741609Y-16871270D01* +X10741609Y-16871270D02* +X10722561Y-16880794D01* +X10722561Y-16880794D02* +X10674942Y-16880794D01* +X10674942Y-16880794D02* +X10655894Y-16871270D01* +X10655894Y-16871270D02* +X10646371Y-16861746D01* +X10951133Y-16880794D02* +X10836847Y-16880794D01* +X10893990Y-16880794D02* +X10893990Y-16680794D01* +X10893990Y-16680794D02* +X10874942Y-16709365D01* +X10874942Y-16709365D02* +X10855894Y-16728413D01* +X10855894Y-16728413D02* +X10836847Y-16737937D01* +X11027323Y-16699841D02* +X11036847Y-16690318D01* +X11036847Y-16690318D02* +X11055894Y-16680794D01* +X11055894Y-16680794D02* +X11103514Y-16680794D01* +X11103514Y-16680794D02* +X11122561Y-16690318D01* +X11122561Y-16690318D02* +X11132085Y-16699841D01* +X11132085Y-16699841D02* +X11141609Y-16718889D01* +X11141609Y-16718889D02* +X11141609Y-16737937D01* +X11141609Y-16737937D02* +X11132085Y-16766508D01* +X11132085Y-16766508D02* +X11017799Y-16880794D01* +X11017799Y-16880794D02* +X11141609Y-16880794D01* +X11217799Y-16680794D02* +X11217799Y-16718889D01* +X11293990Y-16680794D02* +X11293990Y-16718889D01* +X11589228Y-16956984D02* +X11579704Y-16947460D01* +X11579704Y-16947460D02* +X11560656Y-16918889D01* +X11560656Y-16918889D02* +X11551133Y-16899841D01* +X11551133Y-16899841D02* +X11541609Y-16871270D01* +X11541609Y-16871270D02* +X11532085Y-16823651D01* +X11532085Y-16823651D02* +X11532085Y-16785556D01* +X11532085Y-16785556D02* +X11541609Y-16737937D01* +X11541609Y-16737937D02* +X11551133Y-16709365D01* +X11551133Y-16709365D02* +X11560656Y-16690318D01* +X11560656Y-16690318D02* +X11579704Y-16661746D01* +X11579704Y-16661746D02* +X11589228Y-16652222D01* +X11760656Y-16680794D02* +X11665418Y-16680794D01* +X11665418Y-16680794D02* +X11655894Y-16776032D01* +X11655894Y-16776032D02* +X11665418Y-16766508D01* +X11665418Y-16766508D02* +X11684466Y-16756984D01* +X11684466Y-16756984D02* +X11732085Y-16756984D01* +X11732085Y-16756984D02* +X11751133Y-16766508D01* +X11751133Y-16766508D02* +X11760656Y-16776032D01* +X11760656Y-16776032D02* +X11770180Y-16795080D01* +X11770180Y-16795080D02* +X11770180Y-16842699D01* +X11770180Y-16842699D02* +X11760656Y-16861746D01* +X11760656Y-16861746D02* +X11751133Y-16871270D01* +X11751133Y-16871270D02* +X11732085Y-16880794D01* +X11732085Y-16880794D02* +X11684466Y-16880794D01* +X11684466Y-16880794D02* +X11665418Y-16871270D01* +X11665418Y-16871270D02* +X11655894Y-16861746D01* +X12008275Y-16880794D02* +X12008275Y-16680794D01* +X12093990Y-16880794D02* +X12093990Y-16776032D01* +X12093990Y-16776032D02* +X12084466Y-16756984D01* +X12084466Y-16756984D02* +X12065418Y-16747460D01* +X12065418Y-16747460D02* +X12036847Y-16747460D01* +X12036847Y-16747460D02* +X12017799Y-16756984D01* +X12017799Y-16756984D02* +X12008275Y-16766508D01* +X12217799Y-16880794D02* +X12198752Y-16871270D01* +X12198752Y-16871270D02* +X12189228Y-16861746D01* +X12189228Y-16861746D02* +X12179704Y-16842699D01* +X12179704Y-16842699D02* +X12179704Y-16785556D01* +X12179704Y-16785556D02* +X12189228Y-16766508D01* +X12189228Y-16766508D02* +X12198752Y-16756984D01* +X12198752Y-16756984D02* +X12217799Y-16747460D01* +X12217799Y-16747460D02* +X12246371Y-16747460D01* +X12246371Y-16747460D02* +X12265418Y-16756984D01* +X12265418Y-16756984D02* +X12274942Y-16766508D01* +X12274942Y-16766508D02* +X12284466Y-16785556D01* +X12284466Y-16785556D02* +X12284466Y-16842699D01* +X12284466Y-16842699D02* +X12274942Y-16861746D01* +X12274942Y-16861746D02* +X12265418Y-16871270D01* +X12265418Y-16871270D02* +X12246371Y-16880794D01* +X12246371Y-16880794D02* +X12217799Y-16880794D01* +X12398752Y-16880794D02* +X12379704Y-16871270D01* +X12379704Y-16871270D02* +X12370180Y-16852222D01* +X12370180Y-16852222D02* +X12370180Y-16680794D01* +X12551133Y-16871270D02* +X12532085Y-16880794D01* +X12532085Y-16880794D02* +X12493990Y-16880794D01* +X12493990Y-16880794D02* +X12474942Y-16871270D01* +X12474942Y-16871270D02* +X12465418Y-16852222D01* +X12465418Y-16852222D02* +X12465418Y-16776032D01* +X12465418Y-16776032D02* +X12474942Y-16756984D01* +X12474942Y-16756984D02* +X12493990Y-16747460D01* +X12493990Y-16747460D02* +X12532085Y-16747460D01* +X12532085Y-16747460D02* +X12551133Y-16756984D01* +X12551133Y-16756984D02* +X12560656Y-16776032D01* +X12560656Y-16776032D02* +X12560656Y-16795080D01* +X12560656Y-16795080D02* +X12465418Y-16814127D01* +X12636847Y-16871270D02* +X12655895Y-16880794D01* +X12655895Y-16880794D02* +X12693990Y-16880794D01* +X12693990Y-16880794D02* +X12713037Y-16871270D01* +X12713037Y-16871270D02* +X12722561Y-16852222D01* +X12722561Y-16852222D02* +X12722561Y-16842699D01* +X12722561Y-16842699D02* +X12713037Y-16823651D01* +X12713037Y-16823651D02* +X12693990Y-16814127D01* +X12693990Y-16814127D02* +X12665418Y-16814127D01* +X12665418Y-16814127D02* +X12646371Y-16804603D01* +X12646371Y-16804603D02* +X12636847Y-16785556D01* +X12636847Y-16785556D02* +X12636847Y-16776032D01* +X12636847Y-16776032D02* +X12646371Y-16756984D01* +X12646371Y-16756984D02* +X12665418Y-16747460D01* +X12665418Y-16747460D02* +X12693990Y-16747460D01* +X12693990Y-16747460D02* +X12713037Y-16756984D01* +X12789228Y-16956984D02* +X12798752Y-16947460D01* +X12798752Y-16947460D02* +X12817799Y-16918889D01* +X12817799Y-16918889D02* +X12827323Y-16899841D01* +X12827323Y-16899841D02* +X12836847Y-16871270D01* +X12836847Y-16871270D02* +X12846371Y-16823651D01* +X12846371Y-16823651D02* +X12846371Y-16785556D01* +X12846371Y-16785556D02* +X12836847Y-16737937D01* +X12836847Y-16737937D02* +X12827323Y-16709365D01* +X12827323Y-16709365D02* +X12817799Y-16690318D01* +X12817799Y-16690318D02* +X12798752Y-16661746D01* +X12798752Y-16661746D02* +X12789228Y-16652222D01* +M02* diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-PTH.drl b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-PTH.drl new file mode 100644 index 0000000..1324253 --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-PTH.drl @@ -0,0 +1,449 @@ +M48 +; DRILL file KiCad 10.0.4 date 2026-07-06T14:39:54 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2026-07-06T14:39:54-06:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.4 +; #@! TF.FileFunction,Plated,1,4,PTH +FMAT,2 +METRIC +; #@! TA.AperFunction,Plated,PTH,ViaDrill +T1C0.300 +; #@! TA.AperFunction,Plated,PTH,ViaDrill +T2C0.400 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T3C0.400 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T4C0.600 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T5C0.800 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T6C0.950 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T7C1.000 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T8C1.100 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T9C1.300 +% +G90 +G05 +T1 +X81.642Y-41.773 +X81.642Y-48.773 +X81.642Y-55.773 +X81.642Y-62.773 +X81.642Y-69.773 +X81.642Y-76.773 +X81.642Y-83.773 +X81.642Y-90.773 +X81.642Y-97.773 +X81.642Y-104.773 +X81.642Y-111.773 +X81.642Y-118.773 +X81.642Y-125.773 +X81.642Y-132.773 +X87.6Y-58.75 +X88.642Y-41.773 +X88.642Y-48.773 +X88.642Y-69.773 +X88.642Y-76.773 +X88.642Y-83.773 +X88.642Y-90.773 +X88.642Y-97.773 +X88.642Y-104.773 +X88.642Y-111.773 +X88.642Y-118.773 +X88.642Y-125.773 +X88.642Y-132.773 +X91.071Y-62.038 +X91.097Y-104.059 +X92.097Y-109.08 +X92.199Y-67.701 +X93.354Y-109.585 +X93.367Y-93.338 +X93.85Y-69.3 +X94.149Y-84.402 +X94.238Y-70.413 +X94.584Y-46.323 +X95.0Y-114.55 +X95.642Y-41.773 +X95.642Y-76.773 +X95.642Y-90.773 +X95.642Y-104.773 +X95.642Y-111.773 +X95.642Y-118.773 +X95.642Y-125.773 +X95.642Y-132.773 +X96.481Y-72.167 +X96.633Y-78.671 +X97.852Y-82.803 +X98.083Y-74.113 +X98.158Y-78.069 +X98.374Y-101.217 +X99.126Y-102.323 +X99.3Y-114.7 +X99.473Y-103.451 +X99.481Y-93.354 +X99.79Y-107.426 +X100.017Y-94.323 +X100.361Y-84.328 +X101.07Y-115.09 +X101.516Y-77.18 +X101.65Y-85.5 +X101.976Y-75.485 +X102.59Y-100.216 +X102.6Y-99.15 +X102.642Y-48.773 +X102.642Y-118.773 +X102.642Y-125.773 +X102.642Y-132.773 +X102.876Y-80.723 +X102.921Y-95.462 +X103.328Y-84.222 +X104.345Y-71.165 +X105.481Y-106.337 +X106.504Y-97.236 +X106.832Y-111.583 +X107.654Y-82.309 +X108.674Y-96.377 +X109.642Y-62.773 +X109.642Y-76.773 +X109.642Y-90.773 +X109.642Y-97.773 +X109.642Y-118.773 +X109.642Y-125.773 +X109.642Y-132.773 +X110.777Y-111.539 +X110.969Y-113.108 +X113.057Y-91.374 +X113.192Y-106.044 +X113.519Y-94.43 +X113.902Y-103.113 +X114.647Y-94.202 +X114.758Y-48.38 +X115.743Y-105.396 +X116.642Y-48.773 +X116.642Y-62.773 +X116.642Y-76.773 +X116.642Y-97.773 +X116.642Y-118.773 +X116.642Y-125.773 +X116.642Y-132.773 +X116.831Y-94.436 +X116.832Y-109.478 +X117.952Y-94.803 +X118.024Y-91.808 +X120.7Y-67.65 +X122.003Y-97.752 +X123.383Y-96.548 +X123.642Y-48.773 +X123.642Y-69.773 +X123.642Y-76.773 +X123.642Y-83.773 +X123.642Y-125.773 +X123.642Y-132.773 +X124.054Y-91.328 +X124.193Y-57.475 +X124.692Y-94.303 +X124.832Y-95.933 +X125.152Y-94.993 +X125.532Y-94.123 +X125.649Y-91.964 +X126.4Y-95.4 +X126.615Y-111.715 +X126.634Y-113.349 +X126.665Y-98.079 +X127.2Y-118.6 +X127.321Y-96.854 +X127.507Y-95.248 +X127.666Y-92.441 +X128.569Y-92.441 +X129.603Y-92.46 +X130.2Y-99.7 +X130.2Y-106.0 +X130.447Y-92.808 +X130.642Y-69.773 +X130.642Y-76.773 +X130.642Y-111.773 +X130.642Y-132.773 +X131.319Y-83.543 +X132.142Y-111.318 +X133.43Y-103.586 +X134.24Y-97.2 +X134.492Y-98.82 +X135.0Y-97.2 +X135.232Y-98.013 +X135.5Y-61.25 +X136.676Y-95.495 +X137.323Y-88.992 +X137.642Y-41.773 +X137.642Y-48.773 +X137.642Y-111.773 +X137.642Y-132.773 +X138.136Y-97.466 +X138.2Y-91.7 +X140.543Y-92.48 +X141.743Y-98.569 +X141.9Y-135.6 +X142.15Y-60.95 +X144.411Y-96.56 +X144.642Y-41.773 +X144.642Y-48.773 +X144.642Y-111.773 +X144.642Y-118.773 +X144.642Y-132.773 +X147.661Y-69.044 +X151.642Y-41.773 +X151.642Y-104.773 +X151.642Y-118.773 +X151.642Y-125.773 +X151.642Y-132.773 +X152.217Y-51.55 +X153.057Y-97.0 +X153.6Y-64.2 +X154.715Y-93.36 +X154.75Y-63.373 +X155.563Y-61.161 +X156.8Y-63.9 +X158.642Y-41.773 +X158.642Y-48.773 +X158.642Y-69.773 +X158.642Y-83.773 +X158.642Y-111.773 +X158.642Y-125.773 +X158.642Y-132.773 +X160.281Y-60.946 +X160.694Y-59.682 +X161.642Y-61.571 +X163.333Y-77.836 +X163.8Y-91.85 +X164.176Y-64.974 +X164.399Y-108.749 +X164.501Y-60.325 +X165.642Y-41.773 +X165.642Y-48.773 +X165.642Y-55.773 +X165.642Y-69.773 +X166.04Y-75.929 +X166.527Y-75.26 +X166.684Y-63.823 +X166.742Y-55.441 +X166.798Y-79.03 +X167.5Y-125.6 +X167.85Y-84.7 +X168.395Y-46.076 +X169.737Y-114.087 +X169.831Y-65.597 +X170.313Y-55.363 +X171.617Y-113.477 +X171.76Y-97.691 +X173.372Y-49.793 +X173.407Y-53.346 +X173.947Y-108.033 +X174.361Y-60.217 +X175.684Y-98.459 +X176.067Y-104.039 +X177.369Y-107.426 +X177.545Y-46.302 +X177.917Y-45.323 +X179.603Y-49.835 +X181.474Y-109.498 +X181.693Y-60.961 +X183.645Y-51.599 +X185.103Y-116.791 +X185.252Y-114.635 +X187.097Y-116.027 +X187.142Y-107.718 +X187.35Y-62.946 +X188.67Y-102.323 +X188.692Y-107.616 +X189.563Y-50.997 +X190.531Y-50.052 +X190.9Y-89.05 +X191.35Y-114.8 +X192.976Y-114.752 +X193.85Y-86.85 +X194.7Y-105.9 +X195.147Y-110.668 +X196.018Y-48.828 +X196.891Y-110.544 +X198.85Y-88.8 +X200.007Y-48.492 +X200.05Y-84.45 +X203.9Y-86.05 +X203.9Y-89.6 +X209.55Y-113.75 +T2 +X119.382Y-89.423 +X126.822Y-89.223 +X202.152Y-113.193 +T3 +X161.175Y-129.425 +X161.175Y-130.775 +X162.025Y-129.425 +X162.025Y-130.775 +X162.875Y-129.425 +X162.875Y-130.775 +X163.725Y-129.425 +X163.725Y-130.775 +X164.575Y-129.425 +X164.575Y-130.775 +X165.425Y-129.425 +X165.425Y-130.775 +X166.275Y-129.425 +X166.275Y-130.775 +X167.125Y-129.425 +X167.125Y-130.775 +T5 +X174.192Y-74.823 +X174.192Y-76.823 +X174.192Y-78.823 +X174.192Y-80.823 +X174.192Y-82.823 +X174.192Y-84.823 +X174.192Y-86.823 +X174.192Y-88.823 +X174.192Y-90.823 +X174.192Y-92.823 +X196.542Y-74.823 +X196.542Y-76.823 +X196.542Y-78.823 +X196.542Y-80.823 +X196.542Y-82.823 +X196.542Y-84.823 +X196.542Y-86.823 +X196.542Y-88.823 +X196.542Y-90.823 +X196.542Y-92.823 +T6 +X98.192Y-46.323 +X100.692Y-46.323 +X103.192Y-46.323 +X105.692Y-46.323 +X116.192Y-46.323 +X118.692Y-46.323 +X121.192Y-46.323 +X210.192Y-54.323 +X210.192Y-56.823 +X210.192Y-59.323 +X210.192Y-61.823 +X210.192Y-87.823 +X210.192Y-90.323 +X210.192Y-92.823 +X210.192Y-95.323 +X210.192Y-103.323 +X210.192Y-105.823 +X210.192Y-108.323 +T7 +X106.112Y-81.323 +X107.192Y-56.323 +X107.192Y-74.103 +X108.652Y-81.323 +X109.732Y-56.323 +X109.732Y-74.103 +X111.192Y-46.323 +X111.192Y-48.863 +X111.192Y-51.403 +X111.192Y-81.323 +X112.272Y-56.323 +X112.272Y-74.103 +X113.732Y-81.323 +X114.812Y-56.323 +X114.812Y-74.103 +X115.252Y-129.583 +X116.272Y-81.323 +X117.352Y-56.323 +X117.352Y-74.103 +X117.792Y-129.583 +X118.812Y-81.323 +X119.892Y-56.323 +X119.892Y-74.103 +X120.332Y-129.583 +X121.352Y-81.323 +X122.432Y-56.323 +X122.432Y-74.103 +X122.872Y-129.583 +X123.892Y-81.323 +X124.972Y-56.323 +X124.972Y-74.103 +X125.412Y-129.583 +X126.432Y-81.323 +X127.192Y-46.323 +X127.512Y-56.323 +X127.512Y-74.103 +X127.952Y-129.583 +X128.972Y-81.323 +X129.692Y-46.323 +X130.052Y-56.323 +X130.052Y-74.103 +X130.492Y-129.583 +X132.592Y-56.323 +X132.592Y-74.103 +X133.032Y-81.323 +X133.032Y-129.583 +X135.132Y-56.323 +X135.132Y-74.103 +X135.572Y-81.323 +X135.792Y-46.323 +X137.672Y-56.323 +X137.672Y-74.103 +X138.112Y-81.323 +X138.112Y-129.583 +X138.292Y-46.323 +X140.212Y-56.323 +X140.212Y-74.103 +X140.652Y-81.323 +X140.652Y-129.583 +X142.752Y-56.323 +X142.752Y-74.103 +X143.192Y-81.323 +X143.192Y-129.583 +X145.292Y-56.323 +X145.292Y-74.103 +X145.732Y-81.323 +X145.732Y-129.583 +X147.832Y-56.323 +X147.832Y-74.103 +X148.272Y-81.323 +X148.272Y-129.583 +X150.372Y-56.323 +X150.372Y-74.103 +X150.812Y-81.323 +X150.812Y-129.583 +X152.912Y-56.323 +X152.912Y-74.103 +X155.452Y-56.323 +X155.452Y-74.103 +X189.284Y-55.866 +X189.284Y-58.406 +X189.284Y-66.026 +X194.364Y-55.866 +X194.364Y-58.406 +X194.364Y-66.026 +X210.167Y-68.323 +X210.167Y-70.823 +X210.167Y-77.573 +X210.167Y-80.073 +X210.192Y-118.823 +X210.192Y-121.323 +T8 +X199.192Y-133.323 +X199.192Y-137.823 +X205.692Y-133.323 +X205.692Y-137.823 +T9 +X172.692Y-133.823 +X177.692Y-133.823 +X182.692Y-133.823 +X187.692Y-133.823 +X192.692Y-133.823 +T4 +X159.825Y-129.655G85X159.825Y-131.155 +G05 +X159.825Y-133.385G85X159.825Y-134.185 +G05 +X168.475Y-129.655G85X168.475Y-131.155 +G05 +X168.475Y-133.385G85X168.475Y-134.185 +G05 +M30 diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-gerbers-jlc.zip b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-gerbers-jlc.zip new file mode 100644 index 0000000..c903244 Binary files /dev/null and b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-gerbers-jlc.zip differ diff --git a/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-job.gbrjob b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-job.gbrjob new file mode 100644 index 0000000..b148b8a --- /dev/null +++ b/03-Architecture-Hardware/kicad/fab-jlc-usb/hbox-watchdog-v3-PROD-job.gbrjob @@ -0,0 +1,170 @@ +{ + "Header": { + "GenerationSoftware": { + "Vendor": "KiCad", + "Application": "Pcbnew", + "Version": "10.0.4" + }, + "CreationDate": "2026-07-06T14:40:29-06:00" + }, + "GeneralSpecs": { + "ProjectId": { + "Name": "hbox-watchdog-v3-PROD", + "GUID": "68626f78-2d77-4617-9463-68646f672d76", + "Revision": "1.0" + }, + "Size": { + "X": 135.1, + "Y": 100.1 + }, + "LayerNumber": 4, + "BoardThickness": 1.6, + "Finish": "None" + }, + "DesignRules": [ + { + "Layers": "Outer", + "PadToPad": 0.15, + "PadToTrack": 0.15, + "TrackToTrack": 0.2, + "MinLineWidth": 0.2, + "TrackToRegion": 0.15, + "RegionToRegion": 0.15 + }, + { + "Layers": "Inner", + "PadToPad": 0.0, + "PadToTrack": 0.0, + "TrackToTrack": 0.2, + "MinLineWidth": 0.2, + "TrackToRegion": 0.15, + "RegionToRegion": 0.15 + } + ], + "FilesAttributes": [ + { + "Path": "hbox-watchdog-v3-PROD-F_Cu.gtl", + "FileFunction": "Copper,L1,Top", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-In1_Cu.g1", + "FileFunction": "Copper,L2,Inr", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-In2_Cu.g2", + "FileFunction": "Copper,L3,Inr", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-B_Cu.gbl", + "FileFunction": "Copper,L4,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-F_Paste.gtp", + "FileFunction": "SolderPaste,Top", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-B_Paste.gbp", + "FileFunction": "SolderPaste,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-F_Silkscreen.gto", + "FileFunction": "Legend,Top", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-B_Silkscreen.gbo", + "FileFunction": "Legend,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "hbox-watchdog-v3-PROD-F_Mask.gts", + "FileFunction": "SolderMask,Top", + "FilePolarity": "Negative" + }, + { + "Path": "hbox-watchdog-v3-PROD-B_Mask.gbs", + "FileFunction": "SolderMask,Bot", + "FilePolarity": "Negative" + }, + { + "Path": "hbox-watchdog-v3-PROD-Edge_Cuts.gm1", + "FileFunction": "Profile", + "FilePolarity": "Positive" + } + ], + "MaterialStackup": [ + { + "Type": "Legend", + "Name": "Top Silk Screen" + }, + { + "Type": "SolderPaste", + "Name": "Top Solder Paste" + }, + { + "Type": "SolderMask", + "Thickness": 0.01, + "Name": "Top Solder Mask" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "F.Cu" + }, + { + "Type": "Dielectric", + "Thickness": 0.48, + "Material": "FR4", + "Name": "F.Cu/In1.Cu", + "Notes": "Type: dielectric layer 1 (from F.Cu to In1.Cu)" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "In1.Cu" + }, + { + "Type": "Dielectric", + "Thickness": 0.48, + "Material": "FR4", + "Name": "In1.Cu/In2.Cu", + "Notes": "Type: dielectric layer 2 (from In1.Cu to In2.Cu)" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "In2.Cu" + }, + { + "Type": "Dielectric", + "Thickness": 0.48, + "Material": "FR4", + "Name": "In2.Cu/B.Cu", + "Notes": "Type: dielectric layer 3 (from In2.Cu to B.Cu)" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "B.Cu" + }, + { + "Type": "SolderMask", + "Thickness": 0.01, + "Name": "Bottom Solder Mask" + }, + { + "Type": "SolderPaste", + "Name": "Bottom Solder Paste" + }, + { + "Type": "Legend", + "Name": "Bottom Silk Screen" + } + ] +} diff --git a/03-Architecture-Hardware/kicad/fabrication-toolkit-options.json b/03-Architecture-Hardware/kicad/fabrication-toolkit-options.json new file mode 100644 index 0000000..58df17a --- /dev/null +++ b/03-Architecture-Hardware/kicad/fabrication-toolkit-options.json @@ -0,0 +1 @@ +{"ARCHIVE_NAME": "HBOX_v3_PROD", "EXTRA_LAYERS": "", "ALL_ACTIVE_LAYERS": false, "EXTEND_EDGE_CUT": false, "ALTERNATIVE_EDGE_CUT": false, "AUTO TRANSLATE": true, "AUTO FILL": true, "EXCLUDE DNP": true, "OPEN BROWSER": true, "BACKUP_OPT": true} \ No newline at end of file diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn new file mode 100644 index 0000000..7f10043 --- /dev/null +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn @@ -0,0 +1,3501 @@ +(pcb "/Users/leo/Documents/Claude/Projects/Drogheda/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn" + (parser + (string_quote ") + (space_in_quoted_tokens on) + (host_cad "KiCad's Pcbnew") + (host_version "10.0.4") + ) + (resolution um 10) + (unit um) + (structure + (layer F.Cu + (type signal) + (property + (index 0) + ) + ) + (layer In1.Cu + (type signal) + (property + (index 1) + ) + ) + (layer In2.Cu + (type signal) + (property + (index 2) + ) + ) + (layer B.Cu + (type signal) + (property + (index 3) + ) + ) + (boundary + (path pcb 0 215192 -140323 80191.6 -140323 80191.6 -40323.1 215192 -40323.1 + 215192 -140323) + ) + (plane GND (polygon F.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (plane GND (polygon B.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (plane GND (polygon In1.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (via "Via[0-3]_600:300_um" "Via[0-3]_800:400_um") + (rule + (width 200) + (clearance 200) + (clearance 50 (type smd_smd)) + ) + ) + (placement + (component Resistor_SMD:R_0603_1608Metric + (place R2 167366.65 -59323.1 front 0 (PN 10k)) + (place Ren2 178191.65 -59323.1 front 0 (PN 20k)) + (place R5 92241.65 -112323.1 front 0 (PN 10k)) + (place Rg 94191.65 -94323.1 front 0 (PN 100R)) + (place R31 128916.65 -112323.1 front 0 (PN 4.7k)) + (place Rfreq2 179516.65 -111823.1 front 0 (PN 100k)) + (place Rmled 203150 -87950 front 0 (PN 1k)) + (place R3 97866.65 -107323.1 front 0 (PN 1k)) + (place R60 179516.65 -102323.1 front 0 (PN "100k/1%")) + (place Rdfu 110916.65 -112323.1 front 0 (PN 22k)) + (place R20 173866.65 -45323.1 front 0 (PN 100k)) + (place Rts 96866.65 -102323.1 front 0 (PN 1k)) + (place RB3 202254.15 -48323.1 front 0 (PN 330R)) + (place RB4 206254.15 -48323.1 front 0 (PN 330R)) + (place R61 179516.65 -107323.1 front 0 (PN "31.6k/1%")) + (place R1 163866.65 -59323.1 front 0 (PN 1k)) + (place R55 101866.65 -107323.1 front 0 (PN "10k/1%")) + (place Rled 95416.65 -112323.1 front 0 (PN 10k)) + (place Rgs 99191.65 -94323.1 front 0 (PN 100k)) + (place R41 178191.65 -64823.1 front 0 (PN 10k)) + (place RB2 198254.15 -48323.1 front 0 (PN 330R)) + (place Rtp 100866.65 -102323.1 front 0 (PN 10k)) + (place R30 124916.65 -112323.1 front 0 (PN 4.7k)) + (place R6 98741.65 -112323.1 front 0 (PN 10k)) + (place R52 108366.65 -102323.1 front 0 (PN "100k/1%")) + (place R56 105866.65 -107323.1 front 0 (PN 100k)) + (place R42 114916.65 -112323.1 front 0 (PN "10k/1%")) + (place R53 134866.65 -91323.1 front 0 (PN "499k/1%")) + (place R51 104866.65 -102323.1 front 0 (PN "287k/1%")) + (place Rcomp2 179691.65 -116323.1 front 0 (PN 40.2k)) + (place R58 134991.65 -104323.1 front 0 (PN 100k)) + (place Rrp 85191.65 -61323.1 front 0 (PN 10k)) + (place R21 177091.65 -45323.1 front 0 (PN 19.1k)) + (place R7 102916.65 -112323.1 front 0 (PN 10k)) + (place RB1 194254.15 -48323.1 front 0 (PN 330R)) + (place Ren1 174191.65 -59323.1 front 0 (PN 100k)) + (place R8 106916.65 -112323.1 front 0 (PN 10k)) + (place R54 134866.65 -95323.1 front 0 (PN "100k/1%")) + (place R57 134866.65 -99823.1 front 0 (PN 100k)) + (place R50 112366.65 -102323.1 front 0 (PN "825R/1%")) + ) + (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (place P13 116191.65 -46323.1 front 0 (PN "MODO-B-UPLINK (DNP — harness alt)")) + ) + (component Resistor_SMD:R_0603_1608Metric::1 + (place Rigb 101366.65 -74323.1 front 180 (PN 10k)) + (place Rig 101366.65 -69323.1 front 180 (PN 100R)) + ) + (component Diode_SMD:D_SMA + (place Dbk 168191.65 -65823.1 front -90 (PN SS34)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (place P6 210191.65 -61823.1 front 90 (PN FAN)) + ) + (component LED_SMD:LED_0805_2012Metric + (place DB2 198254.15 -44323.1 front 0 (PN LED)) + (place DB1 194254.15 -44323.1 front 0 (PN LED)) + (place DB3 202254.15 -44323.1 front 0 (PN LED)) + (place DB4 206254.15 -44323.1 front 0 (PN LED)) + (place D1 100191.65 -116323.1 front 0 (PN LED)) + (place D4G 203100 -92100 front 0 (PN LED)) + ) + (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical::1" + (place P4 210191.65 -108323.1 front 90 (PN "BATT-1S4P+NTC")) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (place P10 210166.65 -80073.1 front 90 (PN "RESET-EXT")) + (place P8 210166.65 -70823.1 front 90 (PN PANEL_LED)) + ) + (component Capacitor_SMD:C_0603_1608Metric + (place Ccomp 175841.65 -53473.1 front -90 (PN 2.2nF)) + ) + (component "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (place U7 197621.65 -112573.1 front 180 (PN MP1584EN)) + (place U2 169216.65 -52728.1 front 180 (PN MP1584EN)) + ) + (component Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical + (place J1 107191.65 -56323.1 front 90 (PN "Blackpill-L")) + (place J2 107191.65 -74103.1 front 90 (PN "Blackpill-R")) + ) + (component Capacitor_SMD:C_0603_1608Metric::1 + (place Ccomp2 187966.65 -114823.1 front 0 (PN 2.2nF)) + (place Cu3 132916.65 -112323.1 front 0 (PN 100nF)) + (place C7 96191.65 -116323.1 front 0 (PN 100nF)) + (place Cbst2 187916.65 -109823.1 front 0 (PN 10nF)) + (place Cbst 168416.65 -45323.1 front 0 (PN 10nF)) + (place C9 101591.65 -83323.1 front 0 (PN 100nF)) + (place C11 162191.65 -51223.1 front 0 (PN 100nF)) + (place C31 112416.65 -97323.1 front 0 (PN 2.2uF)) + (place C5 92191.65 -116323.1 front 0 (PN 100nF)) + (place C24 118916.65 -112323.1 front 0 (PN 100nF)) + (place Cu4 136916.65 -112323.1 front 0 (PN 100nF)) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::1" + (place P11 135791.65 -46323.1 front 0 (PN "CUTOFF-SW")) + (place P2 127191.65 -46323.1 front 0 (PN "5V-IN-SD15B05")) + ) + (component "Package_TO_SOT_SMD:SOT-23" + (place Q1 154254.15 -64323.1 front 0 (PN AO3401A)) + (place Q5 146754.15 -64323.1 front 0 (PN MMBT3904)) + (place Q2 106191.65 -96323.1 front 0 (PN AO3400A)) + (place Q4 92754.15 -105823.1 front 0 (PN AO3400A)) + (place DzG 99191.65 -61323.1 front 0 (PN BZX84C15)) + (place Q6 183191.65 -63323.1 front 0 (PN MMBT3904)) + ) + (component "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (place Q7 112716.65 -87228.1 front 0 (PN AO4406A)) + ) + (component Capacitor_SMD:C_0805_2012Metric + (place C34 130991.65 -104323.1 front 0 (PN 10uF)) + (place C35 130191.65 -96323.1 front 0 (PN 22uF)) + (place C30 100191.65 -98323.1 front 0 (PN 10uF)) + (place C23 179741.65 -51223.1 front 0 (PN 22uF/16V)) + ) + (component "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (place U3 124191.65 -118323.1 front 0 (PN "SHT40-AD1B")) + ) + (component Capacitor_SMD:C_0805_2012Metric::1 + (place C40 179691.65 -96323.1 front -90 (PN 22uF)) + (place C41 198691.65 -103273.1 front -90 (PN 22uF)) + ) + (component Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical + (place J7 174191.65 -74823.1 front 0 (PN "XBEE-ROW-1 (VCC/DOUT/DIN)")) + (place J8 196541.65 -74823.1 front 0 (PN "XBEE-ROW-2")) + ) + (component Diode_SMD:D_SMA::1 + (place D2 94191.65 -98323.1 front 0 (PN SS34)) + (place Dbk2 188491.65 -103823.1 front 0 (PN SS34)) + ) + (component Resistor_SMD:R_1206_3216Metric + (place RS1 100191.65 -88323.1 front 0 (PN "8mR/1%")) + ) + (component MountingHole:MountingHole_3.2mm + (place MH3 85191.65 -135323.1 front 0 (PN MountingHole_3.2mm)) + (place MH4 211191.65 -135323.1 front 0 (PN MountingHole_3.2mm)) + (place MH2 211191.65 -45323.1 front 0 (PN MountingHole_3.2mm)) + (place MH1 85191.65 -45323.1 front 0 (PN MountingHole_3.2mm)) + ) + (component Diode_SMD:D_SMB + (place D10 91191.65 -61823.1 front 0 (PN SMBJ33A)) + ) + (component Resistor_SMD:R_0603_1608Metric::2 + (place Rcomp 175841.65 -48623.1 front -90 (PN 40.2k)) + (place R40 178366.65 -69323.1 front -90 (PN 1k)) + ) + (component Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical + (place H3 111191.65 -46323.1 front 0 (PN "USART1-RSV (DNP)")) + ) + (component "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (place L6 167691.65 -104823.1 front 0 (PN 2.2uH/8A)) + (place L2 187291.65 -47823.1 front 0 (PN 10uH)) + (place L7 167691.65 -118323.1 front 0 (PN 10uH/2A)) + ) + (component "Package_TO_SOT_SMD:SOT-563" + (place U4 130191.65 -118323.1 front 0 (PN TMP102)) + ) + (component TestPoint:TestPoint_Pad_D1.5mm + (place TP1 113191.65 -107323.1 front 0 (PN CLPROG)) + (place TP2 127691.65 -87323.1 front 0 (PN PFO)) + ) + (component Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (place SW4G 148175 -135600 front 0 (PN RESET)) + ) + (component Capacitor_SMD:C_1210_3225Metric + (place C22 161691.65 -45298.1 front 90 (PN 22uF/50V)) + ) + (component Resistor_SMD:R_0603_1608Metric::3 + (place Rcc1 161425 -124750 front 90 (PN 5.1k)) + (place Rcc2 165400 -124750 front 90 (PN 5.1k)) + (place Rfreq 161135.95 -55555.2 front 90 (PN 100k)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" + (place P5 98191.65 -46323.1 front 0 (PN TEMP_PROBE)) + ) + (component "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (place JP4 141391.65 -99823.1 front 0 (PN F0:1)) + (place JP3 141391.65 -94823.1 front 0 (PN F1:0)) + (place JP2 141391.65 -90323.1 front 0 (PN "F2:Li-ion")) + ) + (component "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" + (place JP1 165541.65 -80323.1 front 0 (PN 0R)) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::2" + (place P12 210191.65 -121323.1 front 90 (PN "NTC-HOTSPOT")) + ) + (component Capacitor_SMD:C_1210_3225Metric::1 + (place C32 120666.65 -104323.1 front 0 (PN 47uF)) + (place C33 126166.65 -104323.1 front 0 (PN 47uF)) + ) + (component Connector_USB:USB_C_Receptacle_GCT_USB4085 + (place J9 161175 -129425 front 0 (PN "USB-C")) + ) + (component "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" + (place P1 172691.65 -133823.1 front 0 (PN "GX16-5")) + ) + (component Fuse:Fuse_1812_4532Metric + (place F1 147191.65 -46323.1 front 0 (PN "PPTC 3A")) + ) + (component "Relay_THT:Relay_SPDT_Omron_G5V-1" + (place K1 189284.15 -55865.6 front 0 (PN "G5V-1 DC5")) + ) + (component Capacitor_SMD:CP_Elec_6.3x7.7 + (place C43 185191.65 -122323.1 front 0 (PN 100uF/6.3V)) + (place C10 89691.65 -71823.1 front 0 (PN 47uF/50V)) + ) + (component "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (place U6 121741.65 -94323.1 front 0 (PN LTC4040EUFD)) + ) + (component "Package_TO_SOT_SMD:TO-252-2" + (place Q10 90191.65 -54323.1 front 0 (PN IRFR5305)) + ) + (component Button_Switch_THT:SW_PUSH_6mm + (place SW1 199191.65 -133323.1 front 0 (PN RESET)) + ) + (component Capacitor_SMD:CP_Elec_6.3x7.7::1 + (place C3 154691.65 -48523.1 front 90 (PN 47uF)) + ) + (component "Diode_SMD:D_SOD-123" + (place D5 95191.65 -83323.1 front 0 (PN BAT54)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (place P3 210191.65 -95323.1 front 90 (PN "RTK2B-UART1 (DNP — harness alt)")) + ) + (component "Diode_SMD:D_SOD-123::1" + (place D6 199691.65 -61823.1 front 180 (PN 1N4148W)) + ) + (component Module:Arduino_UNO_R3 + (place MOD1 115251.65 -129583.1 back 180 (PN "simpleRTK2B-Pro on UNO female headers")) + ) + ) + (library + (image Resistor_SMD:R_0603_1608Metric + (outline (polygon signal 0 1475 -725 -1475 -725 -1475 725 1475 725)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 100 -800 412.5 800 412.5 800 -412.5 -800 -412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (outline (polygon signal 0 7945 -3895 -2945 -3895 -2945 2845 7945 2845)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -1800 -2750 2500 -2750)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 6800 200 6800 -2750)) + (outline (path signal 120 6800 -2750 2500 -2750)) + (outline (path signal 120 7550 200 6800 200)) + (outline (path signal 120 -2560 2460 7560 2460 7560 -3510 -2560 -3510 -2560 2460)) + (outline (path signal 120 -2550 2450 -750 2450 -750 1700 -2550 1700 -2550 2450)) + (outline (path signal 120 750 2450 4250 2450 4250 1700 750 1700 750 2450)) + (outline (path signal 120 5750 2450 7550 2450 7550 1700 5750 1700 5750 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 7450 2350 7450 -3400 -2450 -3400 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + ) + (image Resistor_SMD:R_0603_1608Metric::1 + (outline (polygon signal 0 -1475 725 1475 725 1475 -725 -1475 -725)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 100 -800 412.5 800 412.5 800 -412.5 -800 -412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image Diode_SMD:D_SMA + (outline (polygon signal 0 3495 1745 3495 -1745 -3495 -1745 -3495 1745)) + (outline (path signal 120 -3510 -1650 2000 -1650)) + (outline (path signal 120 -3510 1650 -3510 -1650)) + (outline (path signal 120 -3510 1650 2000 1650)) + (outline (path signal 100 -2300 -1500 -2300 1500)) + (outline (path signal 100 2300 -1500 -2300 -1500)) + (outline (path signal 100 501.18 -750.32 501.18 799.08)) + (outline (path signal 100 -649.44 -1.02 501.18 -750.32)) + (outline (path signal 100 -649.44 -1.02 -1551.14 -1.02)) + (outline (path signal 100 -649.44 -1.02 501.18 799.08)) + (outline (path signal 100 501.18 -1.02 1499.4 -1.02)) + (outline (path signal 100 -649.44 799.08 -649.44 -801.12)) + (outline (path signal 100 2300 1500 2300 -1500)) + (outline (path signal 100 2300 1500 -2300 1500)) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 1 -2000 0) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 2 2000 0) + ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (outline (polygon signal 0 -2945 -3895 -2945 2845 10445 2845 10445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 10060 -3510 10060 2460 -2560 2460)) + (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 9950 -3400 9950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 (rotate 180) 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 4 7500 0) + ) + (image LED_SMD:LED_0805_2012Metric + (outline (polygon signal 0 1675 -945 -1675 -945 -1675 945 1675 945)) + (outline (path signal 120 -1685 960 -1685 -960)) + (outline (path signal 120 -1685 -960 1000 -960)) + (outline (path signal 120 1000 960 -1685 960)) + (outline (path signal 100 -1000 300 -1000 -600)) + (outline (path signal 100 -1000 -600 1000 -600)) + (outline (path signal 100 -700 600 -1000 300)) + (outline (path signal 100 1000 600 -700 600)) + (outline (path signal 100 1000 -600 1000 600)) + (pin RoundRect[T]Pad_975.000000x1400.000000_244.678000_um_0.000000_0 1 -937.5 0) + (pin RoundRect[T]Pad_975.000000x1400.000000_244.678000_um_0.000000_0 2 937.5 0) + ) + (image "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical::1" + (outline (polygon signal 0 -2945 -3895 -2945 2845 7945 2845 7945 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 7550 200 6800 200)) + (outline (path signal 120 6800 200 6800 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 6800 -2750 2500 -2750)) + (outline (path signal 120 -1800 -2750 2500 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 7560 -3510 7560 2460 -2560 2460)) + (outline (path signal 120 5750 2450 5750 1700 7550 1700 7550 2450 5750 2450)) + (outline (path signal 120 750 2450 750 1700 4250 1700 4250 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 7450 -3400 7450 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + ) + (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (outline (polygon signal 0 -2945 -3895 -2945 2845 5445 2845 5445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 5060 -3510 5060 2460 -2560 2460)) + (outline (path signal 120 3250 2450 3250 1700 5050 1700 5050 2450 3250 2450)) + (outline (path signal 120 750 2450 750 1700 1750 1700 1750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 4950 -3400 4950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 (rotate 180) 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um (rotate 180) 2 2500 0) + ) + (image Capacitor_SMD:C_0603_1608Metric + (outline (polygon signal 0 1475 725 1475 -725 -1475 -725 -1475 725)) + (outline (path signal 120 -140.58 -510 140.58 -510)) + (outline (path signal 120 -140.58 510 140.58 510)) + (outline (path signal 100 -800 400 -800 -400 800 -400 800 400 -800 400)) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 1 -775 0) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 2 775 0) + ) + (image "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (outline (polygon signal 0 -2195 -2455 -3695 -2455 -3695 2455 -2195 2455 -2195 2695 + 2195 2695 2195 2455 3695 2455 3695 -2455 2195 -2455 2195 -2695 + -2195 -2695)) + (outline (path signal 120 2060 -2560 -2060 -2560)) + (outline (path signal 120 2060 -2465 2060 -2560)) + (outline (path signal 120 2060 2560 2060 2465)) + (outline (path signal 120 -2060 -2560 -2060 -2465)) + (outline (path signal 120 -2060 2465 -2060 2560)) + (outline (path signal 120 -2060 2560 2060 2560)) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 1 -2475 1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 2 -2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 3 -2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 4 -2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 5 2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 6 2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 7 2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 8 2475 1905) + (pin Rect[T]Pad_2290.000000x3000.000000_um 9 0 0) + ) + (image Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical + (outline (polygon signal 0 -1765 -50025 -1765 1765 1765 1765 1765 -50025)) + (outline (path signal 120 1330 1330 1330 0)) + (outline (path signal 120 0 1330 1330 1330)) + (outline (path signal 120 1330 -1270 1330 -49590)) + (outline (path signal 120 -1330 -1270 1330 -1270)) + (outline (path signal 120 -1330 -1270 -1330 -49590)) + (outline (path signal 120 -1330 -49590 1330 -49590)) + (outline (path signal 100 635 1270 1270 635)) + (outline (path signal 100 -1270 1270 635 1270)) + (outline (path signal 100 1270 635 1270 -49530)) + (outline (path signal 100 1270 -49530 -1270 -49530)) + (outline (path signal 100 -1270 -49530 -1270 1270)) + (pin Rect[A]Pad_1700.000000x1700.000000_um 1 0 0) + (pin Round[A]Pad_1700.000000_um 2 0 -2540) + (pin Round[A]Pad_1700.000000_um 3 0 -5080) + (pin Round[A]Pad_1700.000000_um 4 0 -7620) + (pin Round[A]Pad_1700.000000_um 5 0 -10160) + (pin Round[A]Pad_1700.000000_um 6 0 -12700) + (pin Round[A]Pad_1700.000000_um 7 0 -15240) + (pin Round[A]Pad_1700.000000_um 8 0 -17780) + (pin Round[A]Pad_1700.000000_um 9 0 -20320) + (pin Round[A]Pad_1700.000000_um 10 0 -22860) + (pin Round[A]Pad_1700.000000_um 11 0 -25400) + (pin Round[A]Pad_1700.000000_um 12 0 -27940) + (pin Round[A]Pad_1700.000000_um 13 0 -30480) + (pin Round[A]Pad_1700.000000_um 14 0 -33020) + (pin Round[A]Pad_1700.000000_um 15 0 -35560) + (pin Round[A]Pad_1700.000000_um 16 0 -38100) + (pin Round[A]Pad_1700.000000_um 17 0 -40640) + (pin Round[A]Pad_1700.000000_um 18 0 -43180) + (pin Round[A]Pad_1700.000000_um 19 0 -45720) + (pin Round[A]Pad_1700.000000_um 20 0 -48260) + ) + (image Capacitor_SMD:C_0603_1608Metric::1 + (outline (polygon signal 0 1475 -725 -1475 -725 -1475 725 1475 725)) + (outline (path signal 120 -140.58 510 140.58 510)) + (outline (path signal 120 -140.58 -510 140.58 -510)) + (outline (path signal 100 -800 400 800 400 800 -400 -800 -400 -800 400)) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 1 -775 0) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 2 775 0) + ) + (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::1" + (outline (polygon signal 0 5445 -3895 -2945 -3895 -2945 2845 5445 2845)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 -2560 2460 5060 2460 5060 -3510 -2560 -3510 -2560 2460)) + (outline (path signal 120 -2550 2450 -750 2450 -750 1700 -2550 1700 -2550 2450)) + (outline (path signal 120 750 2450 1750 2450 1750 1700 750 1700 750 2450)) + (outline (path signal 120 3250 2450 5050 2450 5050 1700 3250 1700 3250 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 4950 2350 4950 -3400 -2450 -3400 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um 2 2500 0) + ) + (image "Package_TO_SOT_SMD:SOT-23" + (outline (polygon signal 0 895 545 1925 545 1925 -545 895 -545 895 -1695 -895 -1695 + -895 -1495 -1925 -1495 -1925 -395 -895 -395 -895 395 -1925 395 + -1925 1495 -895 1495 -895 1695 895 1695)) + (outline (path signal 120 -760 1560 760 1560)) + (outline (path signal 120 -760 1510 -760 1560)) + (outline (path signal 120 -760 -390 -760 390)) + (outline (path signal 120 -760 -1560 -760 -1510)) + (outline (path signal 120 760 1560 760 560)) + (outline (path signal 120 760 -560 760 -1560)) + (outline (path signal 120 760 -1560 -760 -1560)) + (pin RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 1 -937.5 950) + (pin RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 2 -937.5 -950) + (pin RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 3 937.5 0) + ) + (image "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (outline (polygon signal 0 2195 2455 3695 2455 3695 -2455 2195 -2455 2195 -2695 + -2195 -2695 -2195 -2455 -3695 -2455 -3695 2455 -2195 2455 + -2195 2695 2195 2695)) + (outline (path signal 120 -2060 2560 2060 2560)) + (outline (path signal 120 -2060 2465 -2060 2560)) + (outline (path signal 120 -2060 -2560 -2060 -2465)) + (outline (path signal 120 2060 2560 2060 2465)) + (outline (path signal 120 2060 -2465 2060 -2560)) + (outline (path signal 120 2060 -2560 -2060 -2560)) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 1 -2475 1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 2 -2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 3 -2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 4 -2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 5 2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 6 2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 7 2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 8 2475 1905) + ) + (image Capacitor_SMD:C_0805_2012Metric + (outline (polygon signal 0 1695 -975 -1695 -975 -1695 975 1695 975)) + (outline (path signal 120 -261.252 735 261.252 735)) + (outline (path signal 120 -261.252 -735 261.252 -735)) + (outline (path signal 100 -1000 625 1000 625 1000 -625 -1000 -625 -1000 625)) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 1 -950 0) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 2 950 0) + ) + (image "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (outline (polygon signal 0 1195 -995 -1195 -995 -1195 995 1195 995)) + (outline (path signal 120 -750 860 750 860)) + (outline (path signal 120 -750 -860 750 -860)) + (outline (path signal 100 -750 375 -375 750)) + (outline (path signal 100 -750 -750 -750 375)) + (outline (path signal 100 -375 750 750 750)) + (outline (path signal 100 750 750 750 -750)) + (outline (path signal 100 750 -750 -750 -750)) + (pin Rect[T]Pad_500.000000x300.000000_um 1 -700 400) + (pin Rect[T]Pad_500.000000x300.000000_um 2 -700 -400) + (pin Rect[T]Pad_500.000000x300.000000_um 3 700 -400) + (pin Rect[T]Pad_500.000000x300.000000_um 4 700 400) + (keepout "" (polygon F.Cu 0 22750 550 22450 550 22450 250 22750 250 22750 -250 + 22450 -250 22450 -550 22750 -550 22750 -750 21250 -750 21250 -550 + 21550 -550 21550 -250 21250 -250 21250 250 21550 250 21550 550 + 21250 550 21250 750 22750 750 22750 550)) + ) + (image Capacitor_SMD:C_0805_2012Metric::1 + (outline (polygon signal 0 1695 975 1695 -975 -1695 -975 -1695 975)) + (outline (path signal 120 -261.252 -735 261.252 -735)) + (outline (path signal 120 -261.252 735 261.252 735)) + (outline (path signal 100 -1000 625 -1000 -625 1000 -625 1000 625 -1000 625)) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 1 -950 0) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 2 950 0) + ) + (image Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical + (outline (polygon signal 0 1495 -19495 -1495 -19495 -1495 1495 1495 1495)) + (outline (path signal 120 -1060 -1000 -1060 -19060)) + (outline (path signal 120 -1060 -1000 1060 -1000)) + (outline (path signal 120 -1060 -19060 1060 -19060)) + (outline (path signal 120 0 1060 1060 1060)) + (outline (path signal 120 1060 1060 1060 0)) + (outline (path signal 120 1060 -1000 1060 -19060)) + (outline (path signal 100 -1000 1000 500 1000)) + (outline (path signal 100 -1000 -19000 -1000 1000)) + (outline (path signal 100 500 1000 1000 500)) + (outline (path signal 100 1000 500 1000 -19000)) + (outline (path signal 100 1000 -19000 -1000 -19000)) + (pin Rect[A]Pad_1350.000000x1350.000000_um 1 0 0) + (pin Round[A]Pad_1350.000000_um 2 0 -2000) + (pin Round[A]Pad_1350.000000_um 3 0 -4000) + (pin Round[A]Pad_1350.000000_um 4 0 -6000) + (pin Round[A]Pad_1350.000000_um 5 0 -8000) + (pin Round[A]Pad_1350.000000_um 6 0 -10000) + (pin Round[A]Pad_1350.000000_um 7 0 -12000) + (pin Round[A]Pad_1350.000000_um 8 0 -14000) + (pin Round[A]Pad_1350.000000_um 9 0 -16000) + (pin Round[A]Pad_1350.000000_um 10 0 -18000) + ) + (image Diode_SMD:D_SMA::1 + (outline (polygon signal 0 3495 -1745 -3495 -1745 -3495 1745 3495 1745)) + (outline (path signal 120 -3510 1650 -3510 -1650)) + (outline (path signal 120 -3510 1650 2000 1650)) + (outline (path signal 120 -3510 -1650 2000 -1650)) + (outline (path signal 100 -2300 -1500 -2300 1500)) + (outline (path signal 100 -649.44 799.08 -649.44 -801.12)) + (outline (path signal 100 -649.44 -1.02 -1551.14 -1.02)) + (outline (path signal 100 -649.44 -1.02 501.18 799.08)) + (outline (path signal 100 -649.44 -1.02 501.18 -750.32)) + (outline (path signal 100 501.18 -1.02 1499.4 -1.02)) + (outline (path signal 100 501.18 -750.32 501.18 799.08)) + (outline (path signal 100 2300 1500 -2300 1500)) + (outline (path signal 100 2300 1500 2300 -1500)) + (outline (path signal 100 2300 -1500 -2300 -1500)) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 1 -2000 0) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 2 2000 0) + ) + (image Resistor_SMD:R_1206_3216Metric + (outline (polygon signal 0 2275 -1125 -2275 -1125 -2275 1125 2275 1125)) + (outline (path signal 120 -727.064 910 727.064 910)) + (outline (path signal 120 -727.064 -910 727.064 -910)) + (outline (path signal 100 -1600 800 1600 800 1600 -800 -1600 -800 -1600 800)) + (pin RoundRect[T]Pad_1125.000000x1750.000000_250.951000_um_0.000000_0 1 -1462.5 0) + (pin RoundRect[T]Pad_1125.000000x1750.000000_250.951000_um_0.000000_0 2 1462.5 0) + ) + (image MountingHole:MountingHole_3.2mm + (keepout "" (circle F.Cu 3700)) + (keepout "" (circle In1.Cu 3700)) + (keepout "" (circle In2.Cu 3700)) + (keepout "" (circle B.Cu 3700)) + ) + (image Diode_SMD:D_SMB + (outline (polygon signal 0 3645 -2245 -3645 -2245 -3645 2245 3645 2245)) + (outline (path signal 120 -3660 2150 -3660 -2150)) + (outline (path signal 120 -3660 2150 2150 2150)) + (outline (path signal 120 -3660 -2150 2150 -2150)) + (outline (path signal 100 -2300 -2000 -2300 2000)) + (outline (path signal 100 -649.44 799.08 -649.44 -801.12)) + (outline (path signal 100 -649.44 -1.02 -1551.14 -1.02)) + (outline (path signal 100 -649.44 -1.02 501.18 799.08)) + (outline (path signal 100 -649.44 -1.02 501.18 -750.32)) + (outline (path signal 100 501.18 -1.02 1499.4 -1.02)) + (outline (path signal 100 501.18 -750.32 501.18 799.08)) + (outline (path signal 100 2300 2000 -2300 2000)) + (outline (path signal 100 2300 2000 2300 -2000)) + (outline (path signal 100 2300 -2000 -2300 -2000)) + (pin RoundRect[T]Pad_2500.000000x2300.000000_250.951000_um_0.000000_0 1 -2150 0) + (pin RoundRect[T]Pad_2500.000000x2300.000000_250.951000_um_0.000000_0 2 2150 0) + ) + (image Resistor_SMD:R_0603_1608Metric::2 + (outline (polygon signal 0 1475 725 1475 -725 -1475 -725 -1475 725)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 100 -800 412.5 -800 -412.5 800 -412.5 800 412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical + (outline (polygon signal 0 1765 -6845 -1765 -6845 -1765 1765 1765 1765)) + (outline (path signal 120 -1380 1380 0 1380)) + (outline (path signal 120 -1380 0 -1380 1380)) + (outline (path signal 120 -1380 -1270 -1380 -6460)) + (outline (path signal 120 -1380 -1270 1380 -1270)) + (outline (path signal 120 -1380 -6460 1380 -6460)) + (outline (path signal 120 1380 -1270 1380 -6460)) + (outline (path signal 100 -1270 635 -635 1270)) + (outline (path signal 100 -1270 -6350 -1270 635)) + (outline (path signal 100 -635 1270 1270 1270)) + (outline (path signal 100 1270 1270 1270 -6350)) + (outline (path signal 100 1270 -6350 -1270 -6350)) + (pin Rect[A]Pad_1700.000000x1700.000000_um 1 0 0) + (pin Round[A]Pad_1700.000000_um 2 0 -2540) + (pin Round[A]Pad_1700.000000_um 3 0 -5080) + ) + (image "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (outline (polygon signal 0 5145 -4395 -5145 -4395 -5145 4395 5145 4395)) + (outline (path signal 120 -2050 4150 2050 4150)) + (outline (path signal 120 -2050 -4150 -4150 -2050)) + (outline (path signal 120 2050 4150 4150 2050)) + (outline (path signal 120 2050 -4150 -2050 -4150)) + (outline (path signal 120 2050 -4150 4150 -2050)) + (outline (path signal 100 -4000 2000 -2000 4000)) + (outline (path signal 100 -4000 -2000 -4000 2000)) + (outline (path signal 100 -2000 4000 2000 4000)) + (outline (path signal 100 -2000 -4000 -4000 -2000)) + (outline (path signal 100 2000 4000 4000 2000)) + (outline (path signal 100 2000 -4000 -2000 -4000)) + (outline (path signal 100 4000 2000 4000 -2000)) + (outline (path signal 100 4000 -2000 2000 -4000)) + (outline (path signal 100 3000 0 2980.45 -341.974 2922.04 -679.49 2825.53 -1008.15 + 2692.2 -1323.66 2523.76 -1621.92 2322.43 -1899.04 2090.81 -2151.39 + 1831.94 -2375.71 1549.19 -2569.05 1246.24 -2728.9 927.051 -2853.17 + 595.771 -2940.25 256.725 -2988.99 -85.668 -2998.78 -426.945 -2969.46 + -762.655 -2901.44 -1088.42 -2795.59 -1400 -2653.3 -1693.33 -2476.42 + -1964.58 -2267.25 -2210.22 -2028.53 -2427.05 -1763.36 -2612.24 -1475.2 + -2763.37 -1167.81 -2878.48 -845.198 -2956.06 -511.567 -2995.11 -171.266 + -2995.11 171.266 -2956.06 511.567 -2878.48 845.198 -2763.37 1167.81 + -2612.24 1475.2 -2427.05 1763.36 -2210.22 2028.53 -1964.58 2267.25 + -1693.33 2476.42 -1400 2653.3 -1088.42 2795.59 -762.655 2901.44 + -426.945 2969.46 -85.668 2998.78 256.725 2988.99 595.771 2940.25 + 927.051 2853.17 1246.24 2728.9 1549.19 2569.05 1831.94 2375.71 + 2090.81 2151.39 2322.43 1899.04 2523.76 1621.92 2692.2 1323.66 + 2825.53 1008.15 2922.04 679.49 2980.45 341.974 3000 0)) + (pin Rect[T]Pad_2000.000000x3200.000000_um 1 -3900 0) + (pin Rect[T]Pad_2000.000000x3200.000000_um 2 3900 0) + ) + (image "Package_TO_SOT_SMD:SOT-563" + (outline (polygon signal 0 745 825 1195 825 1195 -825 745 -825 745 -945 -745 -945 + -745 -825 -1195 -825 -1195 825 -745 825 -745 945 745 945)) + (outline (path signal 120 -425.568 935 710 935)) + (outline (path signal 120 710 -935 -710 -935)) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 1 -712.5 500) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 2 -712.5 0) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 3 -712.5 -500) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 4 712.5 -500) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 5 712.5 0) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 6 712.5 500) + ) + (image TestPoint:TestPoint_Pad_D1.5mm + (outline (polygon signal 0 277.598 1216.23 490.3 1147.12 687.248 1041.13 862.103 901.692 + 1009.25 733.266 1123.96 541.272 1202.55 331.886 1242.49 111.77 + 1245 0 1242.49 -111.769 1202.55 -331.885 1123.96 -541.271 + 1009.25 -733.265 862.103 -901.691 687.248 -1041.13 490.3 -1147.12 + 277.598 -1216.23 55.967 -1246.25 -167.455 -1236.21 -385.502 -1186.45 + -591.157 -1098.55 -777.808 -975.339 -939.461 -820.782 -1070.92 -639.845 + -1167.96 -438.342 -1227.46 -222.75 -1247.51 0 -1227.46 222.751 + -1167.96 438.343 -1070.92 639.846 -939.461 820.783 -777.808 975.34 + -591.157 1098.55 -385.502 1186.45 -167.455 1236.22 55.967 1246.25)) + (outline (path signal 120 950 0 931.746 -185.336 877.686 -363.549 789.896 -527.792 + 671.751 -671.751 527.792 -789.896 363.549 -877.686 185.336 -931.746 + 0 -950 -185.336 -931.746 -363.549 -877.686 -527.792 -789.896 + -671.751 -671.751 -789.896 -527.792 -877.686 -363.549 -931.746 -185.336 + -950 0 -931.746 185.336 -877.686 363.549 -789.896 527.792 + -671.751 671.751 -527.792 789.896 -363.549 877.686 -185.336 931.746 + 0 950 185.336 931.746 363.549 877.686 527.792 789.896 671.751 671.751 + 789.896 527.792 877.686 363.549 931.746 185.336 950 0)) + (pin Round[T]Pad_1500.000000_um 1 0 0) + ) + (image Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (outline (polygon signal 0 3295 745 4745 745 4745 -745 3295 -745 3295 -2095 + -3295 -2095 -3295 -745 -4745 -745 -4745 745 -3295 745 -3295 2095 + 3295 2095)) + (outline (path signal 120 -3200 2000 -3200 800)) + (outline (path signal 120 -3200 -800 -3200 -2000)) + (outline (path signal 120 -3200 -2000 3200 -2000)) + (outline (path signal 120 3200 2000 -3200 2000)) + (outline (path signal 120 3200 800 3200 2000)) + (outline (path signal 120 3200 -2000 3200 -800)) + (outline (path signal 120 -1350 650 1350 650 1350 -650 -1350 -650 -1350 650)) + (outline (path signal 100 -3050 1850 3050 1850 3050 -1850 -3050 -1850 -3050 1850)) + (pin Rect[T]Pad_1250.000000x1000.000000_um 1 -3875 0) + (pin Rect[T]Pad_1250.000000x1000.000000_um 2 3875 0) + ) + (image Capacitor_SMD:C_1210_3225Metric + (outline (polygon signal 0 -2295 -1595 -2295 1595 2295 1595 2295 -1595)) + (outline (path signal 120 -711.252 1360 711.252 1360)) + (outline (path signal 120 -711.252 -1360 711.252 -1360)) + (outline (path signal 100 -1600 1250 -1600 -1250 1600 -1250 1600 1250 -1600 1250)) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 1 -1475 0) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 2 1475 0) + ) + (image Resistor_SMD:R_0603_1608Metric::3 + (outline (polygon signal 0 -1475 -725 -1475 725 1475 725 1475 -725)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 100 -800 412.5 -800 -412.5 800 -412.5 800 412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" + (outline (polygon signal 0 10445 -3895 -2945 -3895 -2945 2845 10445 2845)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 -2560 2460 10060 2460 10060 -3510 -2560 -3510 -2560 2460)) + (outline (path signal 120 -2550 2450 -750 2450 -750 1700 -2550 1700 -2550 2450)) + (outline (path signal 120 750 2450 6750 2450 6750 1700 750 1700 750 2450)) + (outline (path signal 120 8250 2450 10050 2450 10050 1700 8250 1700 8250 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 9950 2350 9950 -3400 -2450 -3400 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 4 7500 0) + ) + (image "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (outline (polygon signal 0 2295 -1245 -2295 -1245 -2295 1245 2295 1245)) + (outline (path signal 0 -750 750 750 750 750 -750 -750 -750 -750 750)) + (outline (path signal 120 -2050 -300 -2050 300)) + (outline (path signal 120 -1500 -1500 -900 -1500)) + (outline (path signal 120 -1400 1000 1400 1000)) + (outline (path signal 120 -1200 -1200 -1500 -1500)) + (outline (path signal 120 -1200 -1200 -900 -1500)) + (outline (path signal 120 1400 -1000 -1400 -1000)) + (outline (path signal 120 2050 300 2050 -300)) + (outline (polygon signal 0 -1990 300 -2001.46 264.733 -2031.46 242.937 -2068.54 242.937 + -2098.54 264.733 -2110 300 -2095.4 448.269 -2052.15 590.84 + -1981.92 722.234 -1887.4 837.401 -1772.23 931.917 -1640.84 1002.15 + -1498.27 1045.4 -1350 1060 -1314.73 1048.54 -1292.94 1018.54 + -1292.94 981.459 -1314.73 951.459 -1350 940 -1422.11 940 + -1562.72 907.908 -1692.65 845.333 -1805.41 755.412 -1895.33 642.655 + -1957.91 512.716 -1990 372.111 -1990 300)) + (outline (polygon signal 0 -1350 -940 -1314.73 -951.459 -1292.94 -981.459 -1292.94 -1018.54 + -1314.73 -1048.54 -1350 -1060 -1498.27 -1045.4 -1640.84 -1002.15 + -1772.23 -931.917 -1887.4 -837.401 -1981.92 -722.234 -2052.15 -590.84 + -2095.4 -448.269 -2110 -300 -2098.54 -264.733 -2068.54 -242.937 + -2031.46 -242.937 -2001.46 -264.733 -1990 -300 -1990 -372.111 + -1957.91 -512.716 -1895.33 -642.655 -1805.41 -755.412 -1692.65 -845.333 + -1562.72 -907.908 -1422.11 -940 -1350 -940)) + (outline (polygon signal 0 1350 940 1314.73 951.459 1292.94 981.459 1292.94 1018.54 + 1314.73 1048.54 1350 1060 1498.27 1045.4 1640.84 1002.15 + 1772.23 931.917 1887.4 837.401 1981.92 722.234 2052.15 590.84 + 2095.4 448.269 2110 300 2098.54 264.733 2068.54 242.937 2031.46 242.937 + 2001.46 264.733 1990 300 1990 372.111 1957.91 512.716 1895.33 642.655 + 1805.41 755.412 1692.65 845.333 1562.72 907.908 1422.11 940 + 1350 940)) + (outline (polygon signal 0 1990 -300 2001.46 -264.733 2031.46 -242.937 2068.54 -242.937 + 2098.54 -264.733 2110 -300 2095.4 -448.269 2052.15 -590.84 + 1981.92 -722.234 1887.4 -837.401 1772.23 -931.917 1640.84 -1002.15 + 1498.27 -1045.4 1350 -1060 1314.73 -1048.54 1292.94 -1018.54 + 1292.94 -981.459 1314.73 -951.459 1350 -940 1422.11 -940 + 1562.72 -907.908 1692.65 -845.333 1805.41 -755.412 1895.33 -642.655 + 1957.91 -512.716 1990 -372.111 1990 -300)) + (pin Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_990DCDE6AD7E39367AA0DEC71F4DEF99 1 -1300 0) + (pin Rect[T]Pad_1000.000000x1500.000000_um 2 0 0) + (pin Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_8D8E21F0723AC27F1E3DCB4B20CFF501 3 1300 0) + ) + (image "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" + (outline (polygon signal 0 1645 -1245 -1645 -1245 -1645 1245 1645 1245)) + (outline (path signal 0 -150 750 150 750 150 -750 -150 -750 -150 750)) + (outline (path signal 120 -1400 -300 -1400 300)) + (outline (path signal 120 -700 1000 700 1000)) + (outline (path signal 120 700 -1000 -700 -1000)) + (outline (path signal 120 1400 300 1400 -300)) + (outline (polygon signal 0 -1340 300 -1351.46 264.733 -1381.46 242.937 -1418.54 242.937 + -1448.54 264.733 -1460 300 -1445.4 448.269 -1402.15 590.84 + -1331.92 722.234 -1237.4 837.401 -1122.23 931.917 -990.84 1002.15 + -848.269 1045.4 -700 1060 -664.733 1048.54 -642.937 1018.54 + -642.937 981.459 -664.733 951.459 -700 940 -772.111 940 -912.716 907.908 + -1042.65 845.333 -1155.41 755.412 -1245.33 642.655 -1307.91 512.716 + -1340 372.111 -1340 300)) + (outline (polygon signal 0 -700 -940 -664.733 -951.459 -642.937 -981.459 -642.937 -1018.54 + -664.733 -1048.54 -700 -1060 -848.269 -1045.4 -990.84 -1002.15 + -1122.23 -931.917 -1237.4 -837.401 -1331.92 -722.234 -1402.15 -590.84 + -1445.4 -448.269 -1460 -300 -1448.54 -264.733 -1418.54 -242.937 + -1381.46 -242.937 -1351.46 -264.733 -1340 -300 -1340 -372.111 + -1307.91 -512.716 -1245.33 -642.655 -1155.41 -755.412 -1042.65 -845.333 + -912.716 -907.908 -772.111 -940 -700 -940)) + (outline (polygon signal 0 700 940 664.733 951.459 642.937 981.459 642.937 1018.54 + 664.733 1048.54 700 1060 848.269 1045.4 990.84 1002.15 1122.23 931.917 + 1237.4 837.401 1331.92 722.234 1402.15 590.84 1445.4 448.269 + 1460 300 1448.54 264.733 1418.54 242.937 1381.46 242.937 + 1351.46 264.733 1340 300 1340 372.111 1307.91 512.716 1245.33 642.655 + 1155.41 755.412 1042.65 845.333 912.716 907.908 772.111 940 + 700 940)) + (outline (polygon signal 0 1340 -300 1351.46 -264.733 1381.46 -242.937 1418.54 -242.937 + 1448.54 -264.733 1460 -300 1445.4 -448.269 1402.15 -590.84 + 1331.92 -722.234 1237.4 -837.401 1122.23 -931.917 990.84 -1002.15 + 848.269 -1045.4 700 -1060 664.733 -1048.54 642.937 -1018.54 + 642.937 -981.459 664.733 -951.459 700 -940 772.111 -940 912.716 -907.908 + 1042.65 -845.333 1155.41 -755.412 1245.33 -642.655 1307.91 -512.716 + 1340 -372.111 1340 -300)) + (pin Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_BD66147BA5415864FF86D5BB75C674D5 1 -650 0) + (pin Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_86772D42E08000F807F2952CF30D331A 2 650 0) + ) + (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::2" + (outline (polygon signal 0 -2945 -3895 -2945 2845 5445 2845 5445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 5060 -3510 5060 2460 -2560 2460)) + (outline (path signal 120 3250 2450 3250 1700 5050 1700 5050 2450 3250 2450)) + (outline (path signal 120 750 2450 750 1700 1750 1700 1750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 4950 -3400 4950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um 2 2500 0) + ) + (image Capacitor_SMD:C_1210_3225Metric::1 + (outline (polygon signal 0 2295 -1595 -2295 -1595 -2295 1595 2295 1595)) + (outline (path signal 120 -711.252 1360 711.252 1360)) + (outline (path signal 120 -711.252 -1360 711.252 -1360)) + (outline (path signal 100 -1600 1250 1600 1250 1600 -1250 -1600 -1250 -1600 1250)) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 1 -1475 0) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 2 1475 0) + ) + (image Connector_USB:USB_C_Receptacle_GCT_USB4085 + (outline (polygon signal 0 8245 -9105 -2295 -9105 -2295 1055 8245 1055)) + (outline (path signal 120 -1620 -2400 -1620 -3300)) + (outline (path signal 120 -1620 -6000 -1620 -8730)) + (outline (path signal 120 -1620 -8730 7570 -8730)) + (outline (path signal 120 -1500 680 7450 680)) + (outline (path signal 120 7570 -2400 7570 -3300)) + (outline (path signal 120 7570 -6000 7570 -8730)) + (outline (path signal 100 -1500 560 -1500 -8610)) + (outline (path signal 100 -1500 560 7450 560)) + (outline (path signal 100 -1500 -8610 7450 -8610)) + (outline (path signal 100 -25 -6100 5975 -6100)) + (outline (path signal 100 7450 560 7450 -8610)) + (pin Round[A]Pad_700.000000_um A1 0 0) + (pin Round[A]Pad_700.000000_um A4 850 0) + (pin Round[A]Pad_700.000000_um A5 1700 0) + (pin Round[A]Pad_700.000000_um A6 2550 0) + (pin Round[A]Pad_700.000000_um A7 3400 0) + (pin Round[A]Pad_700.000000_um A8 4250 0) + (pin Round[A]Pad_700.000000_um A9 5100 0) + (pin Round[A]Pad_700.000000_um A12 5950 0) + (pin Round[A]Pad_700.000000_um B1 5950 -1350) + (pin Round[A]Pad_700.000000_um B4 5100 -1350) + (pin Round[A]Pad_700.000000_um B5 4250 -1350) + (pin Round[A]Pad_700.000000_um B6 3400 -1350) + (pin Round[A]Pad_700.000000_um B7 2550 -1350) + (pin Round[A]Pad_700.000000_um B8 1700 -1350) + (pin Round[A]Pad_700.000000_um B9 850 -1350) + (pin Round[A]Pad_700.000000_um B12 0 -1350) + (pin Oval[A]Pad_900.000000x2400.000000_um SH -1350 -980) + (pin Oval[A]Pad_900.000000x1700.000000_um SH@1 -1350 -4360) + (pin Oval[A]Pad_900.000000x2400.000000_um SH@2 7300 -980) + (pin Oval[A]Pad_900.000000x1700.000000_um SH@3 7300 -4360) + ) + (image "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" + (outline (polygon signal 0 22995 -5095 -2995 -5095 -2995 5705 22995 5705)) + (outline (path signal 120 -2620 5320 22620 5320)) + (outline (path signal 120 -2620 2300 22620 2300)) + (outline (path signal 120 -2620 -2600 22620 -2600)) + (outline (path signal 120 -2620 -4100 22620 -4100)) + (outline (path signal 120 -2620 -4720 -2620 5320)) + (outline (path signal 120 -300 -4720 -2620 -4720)) + (outline (path signal 120 22620 5320 22620 -4720)) + (outline (path signal 120 22620 -4720 300 -4720)) + (outline (path signal 100 -2500 5200 22500 5200)) + (outline (path signal 100 -2500 2300 22500 2300)) + (outline (path signal 100 -2500 -2600 22500 -2600)) + (outline (path signal 100 -2500 -4100 -2500 5200)) + (outline (path signal 100 -2500 -4100 22500 -4100)) + (outline (path signal 100 -2000 -4600 -2500 -4100)) + (outline (path signal 100 955 1138 -1138 -955)) + (outline (path signal 100 1138 955 -955 -1138)) + (outline (path signal 100 5955 1138 3862 -955)) + (outline (path signal 100 6138 955 4045 -1138)) + (outline (path signal 100 10955 1138 8862 -955)) + (outline (path signal 100 11138 955 9045 -1138)) + (outline (path signal 100 15955 1138 13862 -955)) + (outline (path signal 100 16138 955 14045 -1138)) + (outline (path signal 100 20955 1138 18862 -955)) + (outline (path signal 100 21138 955 19045 -1138)) + (outline (path signal 100 22500 5200 22500 -4600)) + (outline (path signal 100 22500 -4600 -2000 -4600)) + (outline (path signal 100 1500 0 1480.58 -240.617 1422.81 -475.002 1328.18 -697.085 + 1199.16 -901.113 1039.09 -1081.8 852.097 -1234.48 643.039 -1355.18 + 417.326 -1440.78 180.805 -1489.06 -60.399 -1498.78 -300.039 -1469.69 + -531.907 -1402.52 -750 -1299.04 -948.668 -1161.91 -1122.77 -994.684 + -1267.79 -801.699 -1379.97 -587.95 -1456.41 -358.973 -1495.14 -120.7 + -1495.14 120.7 -1456.41 358.973 -1379.97 587.95 -1267.79 801.699 + -1122.77 994.684 -948.668 1161.91 -750 1299.04 -531.907 1402.52 + -300.039 1469.69 -60.399 1498.78 180.805 1489.06 417.326 1440.78 + 643.039 1355.18 852.097 1234.48 1039.09 1081.8 1199.16 901.113 + 1328.18 697.085 1422.81 475.002 1480.58 240.617 1500 0)) + (outline (path signal 100 6500 0 6480.57 -240.617 6422.81 -475.002 6328.18 -697.085 + 6199.16 -901.113 6039.09 -1081.8 5852.1 -1234.48 5643.04 -1355.18 + 5417.33 -1440.78 5180.81 -1489.06 4939.6 -1498.78 4699.96 -1469.69 + 4468.09 -1402.52 4250 -1299.04 4051.33 -1161.91 3877.23 -994.684 + 3732.22 -801.699 3620.03 -587.95 3543.59 -358.973 3504.86 -120.7 + 3504.86 120.7 3543.59 358.973 3620.03 587.95 3732.22 801.699 + 3877.23 994.684 4051.33 1161.91 4250 1299.04 4468.09 1402.52 + 4699.96 1469.69 4939.6 1498.78 5180.81 1489.06 5417.33 1440.78 + 5643.04 1355.18 5852.1 1234.48 6039.09 1081.8 6199.16 901.113 + 6328.18 697.085 6422.81 475.002 6480.57 240.617 6500 0)) + (outline (path signal 100 11500 0 11480.6 -240.617 11422.8 -475.002 11328.2 -697.085 + 11199.2 -901.113 11039.1 -1081.8 10852.1 -1234.48 10643 -1355.18 + 10417.3 -1440.78 10180.8 -1489.06 9939.6 -1498.78 9699.96 -1469.69 + 9468.09 -1402.52 9250 -1299.04 9051.33 -1161.91 8877.23 -994.684 + 8732.22 -801.699 8620.03 -587.95 8543.59 -358.973 8504.86 -120.7 + 8504.86 120.7 8543.59 358.973 8620.03 587.95 8732.22 801.699 + 8877.23 994.684 9051.33 1161.91 9250 1299.04 9468.09 1402.52 + 9699.96 1469.69 9939.6 1498.78 10180.8 1489.06 10417.3 1440.78 + 10643 1355.18 10852.1 1234.48 11039.1 1081.8 11199.2 901.113 + 11328.2 697.085 11422.8 475.002 11480.6 240.617 11500 0)) + (outline (path signal 100 16500 0 16480.6 -240.617 16422.8 -475.002 16328.2 -697.085 + 16199.2 -901.113 16039.1 -1081.8 15852.1 -1234.48 15643 -1355.18 + 15417.3 -1440.78 15180.8 -1489.06 14939.6 -1498.78 14700 -1469.69 + 14468.1 -1402.52 14250 -1299.04 14051.3 -1161.91 13877.2 -994.684 + 13732.2 -801.699 13620 -587.95 13543.6 -358.973 13504.9 -120.7 + 13504.9 120.7 13543.6 358.973 13620 587.95 13732.2 801.699 + 13877.2 994.684 14051.3 1161.91 14250 1299.04 14468.1 1402.52 + 14700 1469.69 14939.6 1498.78 15180.8 1489.06 15417.3 1440.78 + 15643 1355.18 15852.1 1234.48 16039.1 1081.8 16199.2 901.113 + 16328.2 697.085 16422.8 475.002 16480.6 240.617 16500 0)) + (outline (path signal 100 21500 0 21480.6 -240.617 21422.8 -475.002 21328.2 -697.085 + 21199.2 -901.113 21039.1 -1081.8 20852.1 -1234.48 20643 -1355.18 + 20417.3 -1440.78 20180.8 -1489.06 19939.6 -1498.78 19700 -1469.69 + 19468.1 -1402.52 19250 -1299.04 19051.3 -1161.91 18877.2 -994.684 + 18732.2 -801.699 18620 -587.95 18543.6 -358.973 18504.9 -120.7 + 18504.9 120.7 18543.6 358.973 18620 587.95 18732.2 801.699 + 18877.2 994.684 19051.3 1161.91 19250 1299.04 19468.1 1402.52 + 19700 1469.69 19939.6 1498.78 20180.8 1489.06 20417.3 1440.78 + 20643 1355.18 20852.1 1234.48 21039.1 1081.8 21199.2 901.113 + 21328.2 697.085 21422.8 475.002 21480.6 240.617 21500 0)) + (pin RoundRect[A]Pad_2600.000000x2600.000000_250.951000_um_0.000000_0 (rotate 270) 1 0 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 2 5000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 3 10000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 4 15000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 5 20000 0) + ) + (image Fuse:Fuse_1812_4532Metric + (outline (polygon signal 0 2945 -1945 -2945 -1945 -2945 1945 2945 1945)) + (outline (path signal 120 -1386.25 1710 1386.25 1710)) + (outline (path signal 120 -1386.25 -1710 1386.25 -1710)) + (outline (path signal 100 -2250 1600 2250 1600 2250 -1600 -2250 -1600 -2250 1600)) + (pin RoundRect[T]Pad_1125.000000x3400.000000_250.951000_um_0.000000_0 1 -2137.5 0) + (pin RoundRect[T]Pad_1125.000000x3400.000000_250.951000_um_0.000000_0 2 2137.5 0) + ) + (image "Relay_THT:Relay_SPDT_Omron_G5V-1" + (outline (polygon signal 0 6445 -11445 -1445 -11445 -1445 1345 6445 1345)) + (outline (path signal 120 -1600 1500 600 1500)) + (outline (path signal 120 -1600 -600 -1600 1500)) + (outline (path signal 120 -1400 1300 6400 1300)) + (outline (path signal 120 -1400 -11400 -1400 1300)) + (outline (path signal 120 762 -3683 762 -4318)) + (outline (path signal 120 762 -4318 1422 -4318)) + (outline (path signal 120 1422 -3810 1422 -4826)) + (outline (path signal 120 1422 -4826 3327 -4826)) + (outline (path signal 120 2946 -3810 2311 -4826)) + (outline (path signal 120 3327 -3810 1422 -3810)) + (outline (path signal 120 3327 -3810 3327 -4826)) + (outline (path signal 120 3962 -3683 3962 -4318)) + (outline (path signal 120 3962 -4318 3327 -4318)) + (outline (path signal 120 6400 1300 6400 -11400)) + (outline (path signal 120 6400 -11400 -1400 -11400)) + (outline (path signal 120 -1200 100 -100 1100)) + (outline (path signal 120 -1200 -11200 -1200 100)) + (outline (path signal 120 -100 1100 6200 1100)) + (outline (path signal 120 6200 1100 6200 -11200)) + (outline (path signal 120 6200 -11200 -1200 -11200)) + (pin Rect[A]Pad_2000.000000x2000.000000_um 1 0 0) + (pin Round[A]Pad_2000.000000_um 2 0 -2540) + (pin Round[A]Pad_2000.000000_um 5 0 -10160) + (pin Round[A]Pad_2000.000000_um 6 5080 -10160) + (pin Round[A]Pad_2000.000000_um 9 5080 -2540) + (pin Round[A]Pad_2000.000000_um 10 5080 0) + ) + (image Capacitor_SMD:CP_Elec_6.3x7.7 + (outline (polygon signal 0 3545 1045 4695 1045 4695 -1045 3545 -1045 3545 -3545 + -2397.93 -3545 -3545 -2397.93 -3545 -1045 -4695 -1045 -4695 1045 + -3545 1045 -3545 2397.93 -2397.93 3545 3545 3545)) + (outline (path signal 120 -4437.5 1847.5 -3650 1847.5)) + (outline (path signal 120 -4043.75 2241.25 -4043.75 1453.75)) + (outline (path signal 120 -3410 2345.56 -3410 1060)) + (outline (path signal 120 -3410 2345.56 -2345.56 3410)) + (outline (path signal 120 -3410 -2345.56 -3410 -1060)) + (outline (path signal 120 -3410 -2345.56 -2345.56 -3410)) + (outline (path signal 120 -2345.56 3410 3410 3410)) + (outline (path signal 120 -2345.56 -3410 3410 -3410)) + (outline (path signal 120 3410 3410 3410 1060)) + (outline (path signal 120 3410 -3410 3410 -1060)) + (outline (path signal 100 -3300 2300 -3300 -2300)) + (outline (path signal 100 -3300 2300 -2300 3300)) + (outline (path signal 100 -3300 -2300 -2300 -3300)) + (outline (path signal 100 -2704.84 1330 -2074.84 1330)) + (outline (path signal 100 -2389.84 1645 -2389.84 1015)) + (outline (path signal 100 -2300 3300 3300 3300)) + (outline (path signal 100 -2300 -3300 3300 -3300)) + (outline (path signal 100 3300 3300 3300 -3300)) + (outline (path signal 100 3150 0 3130.88 -346.526 3073.76 -688.845 2979.32 -1022.8 + 2848.72 -1344.35 2683.55 -1649.57 2485.79 -1934.77 2257.86 -2196.49 + 2002.53 -2431.54 1722.89 -2637.07 1422.33 -2810.6 1104.51 -2950.01 + 773.279 -3053.61 432.664 -3120.14 86.796 -3148.8 -260.125 -3139.24 + -603.888 -3091.57 -940.322 -3006.38 -1265.34 -2884.69 -1575 -2727.98 + -1865.54 -2538.16 -2133.44 -2317.53 -2375.44 -2068.77 -2588.6 -1794.89 + -2770.34 -1499.23 -2918.46 -1185.38 -3031.14 -857.126 -3107.04 -518.473 + -3145.22 -173.526 -3145.22 173.526 -3107.04 518.473 -3031.14 857.126 + -2918.46 1185.38 -2770.34 1499.23 -2588.6 1794.89 -2375.44 2068.77 + -2133.44 2317.53 -1865.54 2538.16 -1575 2727.98 -1265.34 2884.69 + -940.322 3006.38 -603.888 3091.57 -260.125 3139.24 86.796 3148.8 + 432.664 3120.14 773.279 3053.61 1104.51 2950.01 1422.33 2810.6 + 1722.89 2637.07 2002.53 2431.54 2257.86 2196.49 2485.79 1934.77 + 2683.55 1649.57 2848.72 1344.35 2979.32 1022.8 3073.76 688.845 + 3130.88 346.526 3150 0)) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 1 -2700 0) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 2 2700 0) + ) + (image "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (outline (polygon signal 0 1375 2745 2245 2745 2245 1875 2625 1875 2625 -1875 + 2245 -1875 2245 -2745 1375 -2745 1375 -3125 -1375 -3125 + -1375 -2745 -2245 -2745 -2245 -1875 -2625 -1875 -2625 1875 + -2245 1875 -2245 2745 -1375 2745 -1375 3125 1375 3125)) + (outline (path signal 120 -2110 2610 -1385 2610)) + (outline (path signal 120 -2110 1885 -2110 2610)) + (outline (path signal 120 -2110 -2610 -2110 -1885)) + (outline (path signal 120 -1385 -2610 -2110 -2610)) + (outline (path signal 120 1385 2610 2110 2610)) + (outline (path signal 120 2110 2610 2110 1885)) + (outline (path signal 120 2110 -1885 2110 -2610)) + (outline (path signal 120 2110 -2610 1385 -2610)) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 1 -1950 1500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 2 -1950 1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 3 -1950 500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 4 -1950 0) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 5 -1950 -500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 6 -1950 -1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 7 -1950 -1500) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 8 -1000 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 9 -500 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 10 0 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 11 500 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 12 1000 -2450) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 13 1950 -1500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 14 1950 -1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 15 1950 -500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 16 1950 0) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 17 1950 500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 18 1950 1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 19 1950 1500) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 20 1000 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 21 500 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 22 0 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 23 -500 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 24 -1000 2450) + (pin Rect[T]Pad_2650.000000x3650.000000_um 25 0 0) + ) + (image "Package_TO_SOT_SMD:TO-252-2" + (outline (polygon signal 0 4705 -3495 -6385 -3495 -6385 3495 4705 3495)) + (outline (path signal 120 -3310 3450 -3310 3180)) + (outline (path signal 120 -3310 -3450 -3310 -3180)) + (outline (path signal 120 3110 3450 -3310 3450)) + (outline (path signal 120 3110 -3450 -3310 -3450)) + (outline (path signal 100 -5810 2655 -5810 1905)) + (outline (path signal 100 -5810 1905 -3110 1905)) + (outline (path signal 100 -5810 -1905 -5810 -2655)) + (outline (path signal 100 -5810 -2655 -3110 -2655)) + (outline (path signal 100 -3110 -1905 -5810 -1905)) + (outline (path signal 100 -2705 2655 -5810 2655)) + (outline (path signal 100 3110 2700 4110 2700)) + (outline (path signal 100 4110 2700 4110 -2700)) + (outline (path signal 100 4110 -2700 3110 -2700)) + (pin RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 1 -5040 2280) + (pin RoundRect[T]Pad_6400.000000x5800.000000_250.948000_um_0.000000_0 2 1260 0) + (pin RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 3 -5040 -2280) + ) + (image Button_Switch_THT:SW_PUSH_6mm + (outline (polygon signal 0 7995 -5995 -1495 -5995 -1495 1495 7995 1495)) + (outline (path signal 120 -250 -1500 -250 -3000)) + (outline (path signal 120 1000 -5500 5500 -5500)) + (outline (path signal 120 5500 1000 1000 1000)) + (outline (path signal 120 6750 -3000 6750 -1500)) + (outline (path signal 100 250 750 3250 750)) + (outline (path signal 100 250 -5250 250 750)) + (outline (path signal 100 3250 750 6250 750)) + (outline (path signal 100 6250 750 6250 -5250)) + (outline (path signal 100 6250 -5250 250 -5250)) + (outline (path signal 100 5265.56 -2250 5246.79 -2524.45 5190.82 -2793.79 5098.7 -3053 + 4972.14 -3297.26 4813.5 -3522 4625.73 -3723.05 4412.34 -3896.66 + 4177.29 -4039.59 3924.97 -4149.19 3660.08 -4223.41 3387.55 -4260.86 + 3112.45 -4260.86 2839.92 -4223.41 2575.03 -4149.19 2322.71 -4039.59 + 2087.66 -3896.66 1874.27 -3723.05 1686.5 -3522 1527.86 -3297.26 + 1401.3 -3053 1309.18 -2793.79 1253.21 -2524.45 1234.44 -2250 + 1253.21 -1975.55 1309.18 -1706.21 1401.3 -1447 1527.86 -1202.74 + 1686.5 -978.002 1874.27 -776.953 2087.66 -603.345 2322.71 -460.411 + 2575.03 -350.813 2839.92 -276.593 3112.45 -239.135 3387.55 -239.135 + 3660.08 -276.593 3924.97 -350.813 4177.29 -460.411 4412.34 -603.345 + 4625.73 -776.953 4813.5 -978.002 4972.14 -1202.74 5098.7 -1447 + 5190.82 -1706.21 5246.79 -1975.55 5265.56 -2250)) + (pin Round[A]Pad_2000.000000_um (rotate 90) 1 0 0) + (pin Round[A]Pad_2000.000000_um (rotate 90) 1@1 6500 0) + (pin Round[A]Pad_2000.000000_um (rotate 90) 2 0 -4500) + (pin Round[A]Pad_2000.000000_um (rotate 90) 2@1 6500 -4500) + ) + (image Capacitor_SMD:CP_Elec_6.3x7.7::1 + (outline (polygon signal 0 3545 -1045 3545 -3545 -2397.93 -3545 -3545 -2397.93 + -3545 -1045 -4695 -1045 -4695 1045 -3545 1045 -3545 2397.93 + -2397.93 3545 3545 3545 3545 1045 4695 1045 4695 -1045)) + (outline (path signal 120 3410 3410 3410 1060)) + (outline (path signal 120 -2345.56 3410 3410 3410)) + (outline (path signal 120 -3410 2345.56 -2345.56 3410)) + (outline (path signal 120 -3410 2345.56 -3410 1060)) + (outline (path signal 120 -4043.75 2241.25 -4043.75 1453.75)) + (outline (path signal 120 -4437.5 1847.5 -3650 1847.5)) + (outline (path signal 120 -3410 -2345.56 -3410 -1060)) + (outline (path signal 120 -3410 -2345.56 -2345.56 -3410)) + (outline (path signal 120 3410 -3410 3410 -1060)) + (outline (path signal 120 -2345.56 -3410 3410 -3410)) + (outline (path signal 100 3300 3300 3300 -3300)) + (outline (path signal 100 -2300 3300 3300 3300)) + (outline (path signal 100 -3300 2300 -2300 3300)) + (outline (path signal 100 -3300 2300 -3300 -2300)) + (outline (path signal 100 -2389.84 1645 -2389.84 1015)) + (outline (path signal 100 -2704.84 1330 -2074.84 1330)) + (outline (path signal 100 -3300 -2300 -2300 -3300)) + (outline (path signal 100 -2300 -3300 3300 -3300)) + (outline (path signal 100 0 -3150 -346.526 -3130.88 -688.845 -3073.76 -1022.8 -2979.32 + -1344.35 -2848.72 -1649.57 -2683.55 -1934.77 -2485.79 -2196.49 -2257.86 + -2431.54 -2002.53 -2637.07 -1722.89 -2810.6 -1422.33 -2950.01 -1104.51 + -3053.61 -773.279 -3120.14 -432.664 -3148.8 -86.796 -3139.24 260.125 + -3091.57 603.888 -3006.38 940.322 -2884.69 1265.34 -2727.98 1575 + -2538.16 1865.54 -2317.53 2133.44 -2068.77 2375.44 -1794.89 2588.6 + -1499.23 2770.34 -1185.38 2918.46 -857.126 3031.14 -518.473 3107.04 + -173.526 3145.22 173.526 3145.22 518.473 3107.04 857.126 3031.14 + 1185.38 2918.46 1499.23 2770.34 1794.89 2588.6 2068.77 2375.44 + 2317.53 2133.44 2538.16 1865.54 2727.98 1575 2884.69 1265.34 + 3006.38 940.322 3091.57 603.888 3139.24 260.125 3148.8 -86.796 + 3120.14 -432.664 3053.61 -773.279 2950.01 -1104.51 2810.6 -1422.33 + 2637.07 -1722.89 2431.54 -2002.53 2196.49 -2257.86 1934.77 -2485.79 + 1649.57 -2683.55 1344.35 -2848.72 1022.8 -2979.32 688.845 -3073.76 + 346.526 -3130.88 0 -3150)) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 1 -2700 0) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 2 2700 0) + ) + (image "Diode_SMD:D_SOD-123" + (outline (polygon signal 0 2345 -1145 -2345 -1145 -2345 1145 2345 1145)) + (outline (path signal 120 -2360 1000 -2360 -1000)) + (outline (path signal 120 -2360 1000 1650 1000)) + (outline (path signal 120 -2360 -1000 1650 -1000)) + (outline (path signal 100 -1400 900 1400 900)) + (outline (path signal 100 -1400 -900 -1400 900)) + (outline (path signal 100 -750 0 -350 0)) + (outline (path signal 100 -350 0 -350 550)) + (outline (path signal 100 -350 0 -350 -550)) + (outline (path signal 100 -350 0 250 400)) + (outline (path signal 100 250 400 250 -400)) + (outline (path signal 100 250 0 750 0)) + (outline (path signal 100 250 -400 -350 0)) + (outline (path signal 100 1400 900 1400 -900)) + (outline (path signal 100 1400 -900 -1400 -900)) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 1 -1650 0) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 2 1650 0) + ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (outline (polygon signal 0 -2945 -3895 -2945 2845 10445 2845 10445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 10060 -3510 10060 2460 -2560 2460)) + (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 9950 -3400 9950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 4 7500 0) + ) + (image "Diode_SMD:D_SOD-123::1" + (outline (polygon signal 0 -2345 1145 2345 1145 2345 -1145 -2345 -1145)) + (outline (path signal 120 -2360 -1000 1650 -1000)) + (outline (path signal 120 -2360 1000 1650 1000)) + (outline (path signal 120 -2360 1000 -2360 -1000)) + (outline (path signal 100 1400 -900 -1400 -900)) + (outline (path signal 100 1400 900 1400 -900)) + (outline (path signal 100 250 -400 -350 0)) + (outline (path signal 100 250 0 750 0)) + (outline (path signal 100 250 400 250 -400)) + (outline (path signal 100 -350 0 250 400)) + (outline (path signal 100 -350 0 -350 -550)) + (outline (path signal 100 -350 0 -350 550)) + (outline (path signal 100 -750 0 -350 0)) + (outline (path signal 100 -1400 -900 -1400 900)) + (outline (path signal 100 -1400 900 1400 900)) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 1 -1650 0) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 2 1650 0) + ) + (image Module:Arduino_UNO_R3 + (outline (polygon signal 0 38345 -2.071 40885 -2542.07 40885 -35307.9 38345 -37847.9 + 38345 -49277.9 36577.9 -51045 -28185 -51045 -28185 -41525 + -34535 -41525 -34535 -29595 -28185 -29595 -28185 -9775 -30095 -9775 + -30095 -385 -28185 -385 -28185 2785 38345 2785)) + (outline (path signal 120 -34420 -41400 -28070 -41400)) + (outline (path signal 120 -34420 -29720 -34420 -41400)) + (outline (path signal 120 -29970 -9650 -28070 -9650)) + (outline (path signal 120 -29970 -510 -29970 -9650)) + (outline (path signal 120 -28070 -50930 36580 -50930)) + (outline (path signal 120 -28070 -41400 -28070 -50930)) + (outline (path signal 120 -28070 -29720 -34420 -29720)) + (outline (path signal 120 -28070 -9650 -28070 -29720)) + (outline (path signal 120 -28070 -510 -29970 -510)) + (outline (path signal 120 -28070 2670 -28070 -510)) + (outline (path signal 120 36580 -50930 38230 -49280)) + (outline (path signal 120 38230 -49280 38230 -37850)) + (outline (path signal 120 38230 -37850 40770 -35310)) + (outline (path signal 120 38230 0 38230 2670)) + (outline (path signal 120 38230 2670 -28070 2670)) + (outline (path signal 120 40770 -35310 40770 -2540)) + (outline (path signal 120 40770 -2540 38230 0)) + (outline (path signal 100 -34290 -41270 -34290 -29840)) + (outline (path signal 100 -34290 -29840 -18410 -29840)) + (outline (path signal 100 -29840 -9530 -29840 -640)) + (outline (path signal 100 -29840 -640 -16510 -640)) + (outline (path signal 100 -27940 -50800 -27940 2540)) + (outline (path signal 100 -27940 2540 38100 2540)) + (outline (path signal 100 -18410 -41270 -34290 -41270)) + (outline (path signal 100 -18410 -29840 -18410 -41270)) + (outline (path signal 100 -16510 -9530 -29840 -9530)) + (outline (path signal 100 -16510 -640 -16510 -9530)) + (outline (path signal 100 36580 -50800 -27940 -50800)) + (outline (path signal 100 38100 -49280 36580 -50800)) + (outline (path signal 100 38100 -37850 38100 -49280)) + (outline (path signal 100 38100 0 40640 -2540)) + (outline (path signal 100 38100 2540 38100 0)) + (outline (path signal 100 40640 -35310 38100 -37850)) + (outline (path signal 100 40640 -2540 40640 -35310)) + (pin Rect[A]Pad_1600.000000x1600.000000_um (rotate 90) 1 0 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 2 2540 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 3 5080 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 4 7620 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 5 10160 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 6 12700 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 7 15240 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 8 17780 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 9 22860 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 10 25400 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 11 27940 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 12 30480 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 13 33020 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 14 35560 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 15 35560 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 16 33020 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 17 30480 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 18 27940 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 19 25400 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 20 22860 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 21 20320 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 22 17780 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 23 13720 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 24 11180 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 25 8640 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 26 6100 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 27 3560 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 28 1020 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 29 -1520 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 30 -4060 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 31 -6600 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 32 -9140 -48260) + ) + (padstack Round[A]Pad_1350.000000_um + (shape (circle F.Cu 1350)) + (shape (circle In1.Cu 1350)) + (shape (circle In2.Cu 1350)) + (shape (circle B.Cu 1350)) + (attach off) + ) + (padstack Round[T]Pad_1500.000000_um + (shape (circle F.Cu 1500)) + (attach off) + ) + (padstack Round[A]Pad_1700.000000_um + (shape (circle F.Cu 1700)) + (shape (circle In1.Cu 1700)) + (shape (circle In2.Cu 1700)) + (shape (circle B.Cu 1700)) + (attach off) + ) + (padstack Round[A]Pad_2000.000000_um + (shape (circle F.Cu 2000)) + (shape (circle In1.Cu 2000)) + (shape (circle In2.Cu 2000)) + (shape (circle B.Cu 2000)) + (attach off) + ) + (padstack Round[A]Pad_2600.000000_um + (shape (circle F.Cu 2600)) + (shape (circle In1.Cu 2600)) + (shape (circle In2.Cu 2600)) + (shape (circle B.Cu 2600)) + (attach off) + ) + (padstack Round[A]Pad_700.000000_um + (shape (circle F.Cu 700)) + (shape (circle In1.Cu 700)) + (shape (circle In2.Cu 700)) + (shape (circle B.Cu 700)) + (attach off) + ) + (padstack Oval[A]Pad_1600.000000x1600.000000_um + (shape (path F.Cu 1600 0 0 0 0)) + (shape (path In1.Cu 1600 0 0 0 0)) + (shape (path In2.Cu 1600 0 0 0 0)) + (shape (path B.Cu 1600 0 0 0 0)) + (attach off) + ) + (padstack Oval[A]Pad_1700.000000x1950.000000_um + (shape (path F.Cu 1700 0 -125 0 125)) + (shape (path In1.Cu 1700 0 -125 0 125)) + (shape (path In2.Cu 1700 0 -125 0 125)) + (shape (path B.Cu 1700 0 -125 0 125)) + (attach off) + ) + (padstack Oval[A]Pad_1700.000000x2000.000000_um + (shape (path F.Cu 1700 0 -150 0 150)) + (shape (path In1.Cu 1700 0 -150 0 150)) + (shape (path In2.Cu 1700 0 -150 0 150)) + (shape (path B.Cu 1700 0 -150 0 150)) + (attach off) + ) + (padstack Oval[A]Pad_900.000000x1700.000000_um + (shape (path F.Cu 900 0 -400 0 400)) + (shape (path In1.Cu 900 0 -400 0 400)) + (shape (path In2.Cu 900 0 -400 0 400)) + (shape (path B.Cu 900 0 -400 0 400)) + (attach off) + ) + (padstack Oval[A]Pad_900.000000x2400.000000_um + (shape (path F.Cu 900 0 -750 0 750)) + (shape (path In1.Cu 900 0 -750 0 750)) + (shape (path In2.Cu 900 0 -750 0 750)) + (shape (path B.Cu 900 0 -750 0 750)) + (attach off) + ) + (padstack RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1100.95 350 -1081.85 446.035 -1027.45 527.449 -946.035 581.848 + -849.999 600.95 850 600.951 946.035 581.848 1027.45 527.449 + 1081.85 446.035 1100.95 349.999 1100.95 -350 1081.85 -446.035 + 1027.45 -527.449 946.035 -581.848 849.999 -600.95 -850 -600.951 + -946.035 -581.848 -1027.45 -527.449 -1081.85 -446.035 -1100.95 -349.999 + -1100.95 350)) + (attach off) + ) + (padstack RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 + (shape (polygon F.Cu 0 -125.238 362.5 -120.462 386.509 -106.862 406.862 -86.509 420.462 + -62.5 425.238 62.5 425.238 86.509 420.462 106.862 406.862 + 120.462 386.509 125.238 362.5 125.238 -362.5 120.462 -386.509 + 106.862 -406.862 86.509 -420.462 62.5 -425.238 -62.5 -425.238 + -86.509 -420.462 -106.862 -406.862 -120.462 -386.509 -125.238 -362.5 + -125.238 362.5)) + (attach off) + ) + (padstack RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1250.95 650 -1231.85 746.035 -1177.45 827.449 -1096.04 881.848 + -999.999 900.95 1000 900.951 1096.04 881.848 1177.45 827.449 + 1231.85 746.035 1250.95 649.999 1250.95 -650 1231.85 -746.035 + 1177.45 -827.449 1096.04 -881.848 999.999 -900.95 -1000 -900.951 + -1096.04 -881.848 -1177.45 -827.449 -1231.85 -746.035 -1250.95 -649.999 + -1250.95 650)) + (attach off) + ) + (padstack RoundRect[T]Pad_2500.000000x2300.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1250.95 900 -1231.85 996.035 -1177.45 1077.45 -1096.04 1131.85 + -999.999 1150.95 1000 1150.95 1096.04 1131.85 1177.45 1077.45 + 1231.85 996.035 1250.95 899.999 1250.95 -900 1231.85 -996.035 + 1177.45 -1077.45 1096.04 -1131.85 999.999 -1150.95 -1000 -1150.95 + -1096.04 -1131.85 -1177.45 -1077.45 -1231.85 -996.035 -1250.95 -899.999 + -1250.95 900)) + (attach off) + ) + (padstack RoundRect[A]Pad_2600.000000x2600.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon In1.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon In2.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon B.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (attach off) + ) + (padstack RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1750.95 550 -1731.85 646.035 -1677.45 727.449 -1596.04 781.848 + -1500 800.95 1500 800.951 1596.04 781.848 1677.45 727.449 + 1731.85 646.035 1750.95 549.999 1750.95 -550 1731.85 -646.035 + 1677.45 -727.449 1596.04 -781.848 1500 -800.95 -1500 -800.951 + -1596.04 -781.848 -1677.45 -727.449 -1731.85 -646.035 -1750.95 -549.999 + -1750.95 550)) + (attach off) + ) + (padstack RoundRect[T]Pad_6400.000000x5800.000000_250.948000_um_0.000000_0 + (shape (polygon F.Cu 0 -3200.95 2650 -3181.85 2746.04 -3127.45 2827.45 -3046.04 2881.85 + -2950 2900.95 2950 2900.95 3046.04 2881.85 3127.45 2827.45 + 3181.85 2746.04 3200.95 2650 3200.95 -2650 3181.85 -2746.04 + 3127.45 -2827.45 3046.04 -2881.85 2950 -2900.95 -2950 -2900.95 + -3046.04 -2881.85 -3127.45 -2827.45 -3181.85 -2746.04 -3200.95 -2650 + -3200.95 2650)) + (attach off) + ) + (padstack RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 + (shape (polygon F.Cu 0 -337.833 87.5 -331.147 121.112 -312.107 149.607 -283.612 168.647 + -249.999 175.332 250 175.333 283.612 168.647 312.107 149.607 + 331.147 121.112 337.832 87.499 337.833 -87.5 331.147 -121.112 + 312.107 -149.607 283.612 -168.647 249.999 -175.332 -250 -175.333 + -283.612 -168.647 -312.107 -149.607 -331.147 -121.112 -337.832 -87.499 + -337.833 87.5)) + (attach off) + ) + (padstack RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 + (shape (polygon F.Cu 0 -400.761 275 -385.479 351.828 -341.959 416.959 -276.828 460.479 + -199.999 475.76 200 475.761 276.828 460.479 341.959 416.959 + 385.479 351.828 400.76 274.999 400.761 -275 385.479 -351.828 + 341.959 -416.959 276.828 -460.479 199.999 -475.76 -200 -475.761 + -276.828 -460.479 -341.959 -416.959 -385.479 -351.828 -400.76 -274.999 + -400.761 275)) + (attach off) + ) + (padstack RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 + (shape (polygon F.Cu 0 -425.238 62.5 -420.462 86.509 -406.862 106.862 -386.509 120.462 + -362.5 125.238 362.5 125.238 386.509 120.462 406.862 106.862 + 420.462 86.509 425.238 62.5 425.238 -62.5 420.462 -86.509 + 406.862 -106.862 386.509 -120.462 362.5 -125.238 -362.5 -125.238 + -386.509 -120.462 -406.862 -106.862 -420.462 -86.509 -425.238 -62.5 + -425.238 62.5)) + (attach off) + ) + (padstack RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 + (shape (polygon F.Cu 0 -450.856 250 -433.664 336.431 -384.704 409.704 -311.431 458.664 + -225 475.856 225 475.856 311.431 458.664 384.704 409.704 + 433.664 336.431 450.856 250 450.856 -250 433.664 -336.431 + 384.704 -409.704 311.431 -458.664 225 -475.856 -225 -475.856 + -311.431 -458.664 -384.704 -409.704 -433.664 -336.431 -450.856 -250 + -450.856 250)) + (attach off) + ) + (padstack RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 + (shape (polygon F.Cu 0 -450.856 375 -433.664 461.431 -384.704 534.704 -311.431 583.664 + -225 600.856 225 600.856 311.431 583.664 384.704 534.704 + 433.664 461.431 450.856 375 450.856 -375 433.664 -461.431 + 384.704 -534.704 311.431 -583.664 225 -600.856 -225 -600.856 + -311.431 -583.664 -384.704 -534.704 -433.664 -461.431 -450.856 -375 + -450.856 375)) + (attach off) + ) + (padstack RoundRect[T]Pad_975.000000x1400.000000_244.678000_um_0.000000_0 + (shape (polygon F.Cu 0 -488.428 456.25 -469.803 549.884 -416.763 629.263 -337.384 682.303 + -243.75 700.928 243.75 700.928 337.384 682.303 416.763 629.263 + 469.803 549.884 488.428 456.25 488.428 -456.25 469.803 -549.884 + 416.763 -629.263 337.384 -682.303 243.75 -700.928 -243.75 -700.928 + -337.384 -682.303 -416.763 -629.263 -469.803 -549.884 -488.428 -456.25 + -488.428 456.25)) + (attach off) + ) + (padstack RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -500.951 475 -481.848 571.035 -427.449 652.449 -346.035 706.848 + -249.999 725.95 250 725.951 346.035 706.848 427.449 652.449 + 481.848 571.035 500.95 474.999 500.951 -475 481.848 -571.035 + 427.449 -652.449 346.035 -706.848 249.999 -725.95 -250 -725.951 + -346.035 -706.848 -427.449 -652.449 -481.848 -571.035 -500.95 -474.999 + -500.951 475)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_BD66147BA5415864FF86D5BB75C674D5 + (shape (polygon F.Cu 0 -500 250 -495.722 315.263 -461.94 441.342 -396.677 554.381 + -304.381 646.677 -191.342 711.94 -65.263 745.722 0 750 500 750 + 500 -750 0 -750 -65.263 -745.722 -191.342 -711.94 -304.381 -646.677 + -396.677 -554.381 -461.94 -441.342 -495.722 -315.263 -500 -250 + -500 250)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_990DCDE6AD7E39367AA0DEC71F4DEF99 + (shape (polygon F.Cu 0 -500 250 -495.722 315.263 -461.94 441.342 -396.677 554.381 + -304.381 646.677 -191.342 711.94 -65.263 745.722 0 750 550 750 + 550 -750 0 -750 -65.263 -745.722 -191.342 -711.94 -304.381 -646.677 + -396.677 -554.381 -461.94 -441.342 -495.722 -315.263 -500 -250 + -500 250)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_86772D42E08000F807F2952CF30D331A + (shape (polygon F.Cu 0 -500 750 0 750 65.263 745.722 191.342 711.94 304.381 646.677 + 396.677 554.381 461.94 441.342 495.722 315.263 500 250 500 -250 + 495.722 -315.263 461.94 -441.342 396.677 -554.381 304.381 -646.677 + 191.342 -711.94 65.263 -745.722 0 -750 -500 -750 -500 750)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_8D8E21F0723AC27F1E3DCB4B20CFF501 + (shape (polygon F.Cu 0 -550 750 0 750 65.263 745.722 191.342 711.94 304.381 646.677 + 396.677 554.381 461.94 441.342 495.722 315.263 500 250 500 -250 + 495.722 -315.263 461.94 -441.342 396.677 -554.381 304.381 -646.677 + 191.342 -711.94 65.263 -745.722 0 -750 -550 -750 -550 750)) + (attach off) + ) + (padstack RoundRect[T]Pad_1125.000000x3400.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -563.451 1450 -544.348 1546.04 -489.949 1627.45 -408.535 1681.85 + -312.499 1700.95 312.5 1700.95 408.535 1681.85 489.949 1627.45 + 544.348 1546.04 563.45 1450 563.451 -1450 544.348 -1546.04 + 489.949 -1627.45 408.535 -1681.85 312.499 -1700.95 -312.5 -1700.95 + -408.535 -1681.85 -489.949 -1627.45 -544.348 -1546.04 -563.45 -1450 + -563.451 1450)) + (attach off) + ) + (padstack RoundRect[T]Pad_1125.000000x1750.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -563.451 625 -544.348 721.035 -489.949 802.449 -408.535 856.848 + -312.499 875.95 312.5 875.951 408.535 856.848 489.949 802.449 + 544.348 721.035 563.45 624.999 563.451 -625 544.348 -721.035 + 489.949 -802.449 408.535 -856.848 312.499 -875.95 -312.5 -875.951 + -408.535 -856.848 -489.949 -802.449 -544.348 -721.035 -563.45 -624.999 + -563.451 625)) + (attach off) + ) + (padstack RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -575.951 1100 -556.848 1196.04 -502.449 1277.45 -421.035 1331.85 + -324.999 1350.95 325 1350.95 421.035 1331.85 502.449 1277.45 + 556.848 1196.04 575.95 1100 575.951 -1100 556.848 -1196.04 + 502.449 -1277.45 421.035 -1331.85 324.999 -1350.95 -325 -1350.95 + -421.035 -1331.85 -502.449 -1277.45 -556.848 -1196.04 -575.95 -1100 + -575.951 1100)) + (attach off) + ) + (padstack RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 + (shape (polygon F.Cu 0 -738.071 150 -726.609 207.621 -693.97 256.47 -645.121 289.109 + -587.499 300.57 587.5 300.571 645.121 289.109 693.97 256.47 + 726.609 207.621 738.07 149.999 738.071 -150 726.609 -207.621 + 693.97 -256.47 645.121 -289.109 587.499 -300.57 -587.5 -300.571 + -645.121 -289.109 -693.97 -256.47 -726.609 -207.621 -738.07 -149.999 + -738.071 150)) + (attach off) + ) + (padstack RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon In1.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon In2.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon B.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (attach off) + ) + (padstack RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon In1.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon In2.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon B.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (attach off) + ) + (padstack RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 + (shape (polygon F.Cu 0 -975.571 150 -964.109 207.621 -931.47 256.47 -882.621 289.109 + -824.999 300.57 825 300.571 882.621 289.109 931.47 256.47 + 964.109 207.621 975.57 149.999 975.571 -150 964.109 -207.621 + 931.47 -256.47 882.621 -289.109 824.999 -300.57 -825 -300.571 + -882.621 -289.109 -931.47 -256.47 -964.109 -207.621 -975.57 -149.999 + -975.571 150)) + (attach off) + ) + (padstack Rect[A]Pad_2000.000000x2000.000000_um + (shape (rect F.Cu -1000 -1000 1000 1000)) + (shape (rect In1.Cu -1000 -1000 1000 1000)) + (shape (rect In2.Cu -1000 -1000 1000 1000)) + (shape (rect B.Cu -1000 -1000 1000 1000)) + (attach off) + ) + (padstack Rect[T]Pad_2000.000000x3200.000000_um + (shape (rect F.Cu -1000 -1600 1000 1600)) + (attach off) + ) + (padstack Rect[T]Pad_2290.000000x3000.000000_um + (shape (rect F.Cu -1145 -1500 1145 1500)) + (attach off) + ) + (padstack Rect[T]Pad_2650.000000x3650.000000_um + (shape (rect F.Cu -1325 -1825 1325 1825)) + (attach off) + ) + (padstack Rect[T]Pad_500.000000x300.000000_um + (shape (rect F.Cu -250 -150 250 150)) + (attach off) + ) + (padstack Rect[T]Pad_1000.000000x1500.000000_um + (shape (rect F.Cu -500 -750 500 750)) + (attach off) + ) + (padstack Rect[T]Pad_1250.000000x1000.000000_um + (shape (rect F.Cu -625 -500 625 500)) + (attach off) + ) + (padstack Rect[A]Pad_1350.000000x1350.000000_um + (shape (rect F.Cu -675 -675 675 675)) + (shape (rect In1.Cu -675 -675 675 675)) + (shape (rect In2.Cu -675 -675 675 675)) + (shape (rect B.Cu -675 -675 675 675)) + (attach off) + ) + (padstack Rect[A]Pad_1600.000000x1600.000000_um + (shape (rect F.Cu -800 -800 800 800)) + (shape (rect In1.Cu -800 -800 800 800)) + (shape (rect In2.Cu -800 -800 800 800)) + (shape (rect B.Cu -800 -800 800 800)) + (attach off) + ) + (padstack Rect[A]Pad_1700.000000x1700.000000_um + (shape (rect F.Cu -850 -850 850 850)) + (shape (rect In1.Cu -850 -850 850 850)) + (shape (rect In2.Cu -850 -850 850 850)) + (shape (rect B.Cu -850 -850 850 850)) + (attach off) + ) + (padstack "Via[0-3]_600:300_um" + (shape (circle F.Cu 600)) + (shape (circle In1.Cu 600)) + (shape (circle In2.Cu 600)) + (shape (circle B.Cu 600)) + (attach off) + ) + (padstack "Via[0-3]_800:400_um" + (shape (circle F.Cu 800)) + (shape (circle In1.Cu 800)) + (shape (circle In2.Cu 800)) + (shape (circle B.Cu 800)) + (attach off) + ) + ) + (network + (net /GATE_LS + (pins R2-1 Q5-2) + ) + (net /SYS5V + (pins R2-2 J1-20 P11-2 F1-1 K1-2 J2-18 D6-1) + ) + (net USART1_RX + (pins P13-1 Rdfu-1 H3-2 K1-1 J2-7 MOD1-23) + ) + (net /DIN_4G + (pins P13-2 J7-3 K1-5 K1-6) + ) + (net GND + (pins P13-3 Rigb-2 Dbk-2 P6-3 Ren2-2 DB2-1 P4-2 P10-2 Ccomp-2 U7-5 DB1-1 J1-19 + Ccomp2-2 C34-2 Rfreq2-2 U3-4 C40-2 J7-4 J7-10 Cu3-2 D10-2 Q5-3 C7-2 P2-2 H3-3 + C35-2 U4-2 U4-4 C9-2 SW4G-2 J8-1 J8-6 J8-10 U2-5 C22-2 R61-2 Rcc1-2 P5-2 DB3-1 + C41-2 Rled-2 JP4-3 Rgs-2 R41-2 DB4-1 Rcc2-2 R6-2 P12-2 C32-2 J9-A1 J9-A12 + J9-B1 J9-B12 J9-SH J9-SH@1 J9-SH@2 J9-SH@3 P1-2 R52-2 J2-19 R56-2 C11-2 C43-2 + U6-5 U6-25 JP3-1 C10-2 SW1-2 SW1-2@1 Rrp-2 Q6-3 C31-2 R21-2 C30-2 C3-2 C33-2 + Rfreq-2 P3-2 C5-2 R8-2 C24-2 R54-2 R50-2 Dbk2-2 Cu4-2 C23-2 JP2-3 D4G-1 MOD1-6 + MOD1-7 MOD1-29) + ) + (net IGN_SENSE + (pins Rigb-1 J1-11 C9-1 D5-2 Rig-2) + ) + (net SW_FAN + (pins Dbk-1 Cbst-2 L2-1 U2-1) + ) + (net /5V_FAN + (pins P6-1 D2-1 R20-1 L2-2 JP1-1 C23-1) + ) + (net /FAN_RET + (pins P6-2 D2-2) + ) + (net FAN_TACH_RAW + (pins P6-4 Rts-1) + ) + (net /EN_FAN + (pins Ren2-1 U2-2 Ren1-2) + ) + (net /BLED2 + (pins DB2-2 RB2-2) + ) + (net /BAT_PLUS + (pins P4-1 R5-1 L6-2 C35-1 U6-23) + ) + (net /NTC + (pins P4-3 R55-2 U6-17) + ) + (net /NRST + (pins P10-1 J1-5 SW1-1 SW1-1@1) + ) + (net CC_FAN + (pins Ccomp-1 Rcomp-2) + ) + (net /SW3_NODE + (pins U7-1 Cbst2-2 Dbk2-1 L7-1) + ) + (net /SW_5V + (pins U7-2 U7-7 C40-1 C3-1 P3-1 MOD1-5) + ) + (net /COMP3 + (pins U7-3 Rcomp2-1) + ) + (net /FB3 + (pins U7-4 R60-2 R61-1) + ) + (net /FREQ3 + (pins U7-6 Rfreq2-1) + ) + (net /BST3 + (pins U7-8 Cbst2-1) + ) + (net /BLED1 + (pins DB1-2 RB1-2) + ) + (net "unconnected-(J1-Pin_1-Pad1)" + (pins J1-1) + ) + (net "unconnected-(J1-Pin_2-Pad2)" + (pins J1-2) + ) + (net "unconnected-(J1-Pin_3-Pad3)" + (pins J1-3) + ) + (net "unconnected-(J1-Pin_4-Pad4)" + (pins J1-4) + ) + (net /BAT_SENSE + (pins J1-6 R5-2 R6-1 C5-1) + ) + (net /PWR_CTRL + (pins J1-7 R1-1) + ) + (net /GNSS_TX + (pins J1-8 P3-3 MOD1-16) + ) + (net /GNSS_RX + (pins J1-9 P3-4 MOD1-15) + ) + (net /5V_SENSE + (pins J1-10 C7-1 R7-2 R8-1) + ) + (net FAN_PWM + (pins J1-12 Rg-1) + ) + (net "unconnected-(J1-Pin_13-Pad13)" + (pins J1-13) + ) + (net EXT_LED + (pins J1-14 Rled-1) + ) + (net /NTC_TEMP + (pins J1-15 P12-1 R42-2 C24-1) + ) + (net "unconnected-(J1-Pin_16-Pad16)" + (pins J1-16) + ) + (net FAN_TACH + (pins J1-17 Rts-2 Rtp-2) + ) + (net 3V3 + (pins J1-18 R31-1 U3-3 Cu3-1 R3-1 Rdfu-2 U4-5 P5-1 Rtp-1 R30-1 J2-20 R42-1 R58-1 + D5-1 R57-1 Cu4-1 MOD1-2) + ) + (net /COMP3_C + (pins Ccomp2-1 Rcomp2-2) + ) + (net /MAIN5V + (pins P11-1 Q7-1 Q7-2 Q7-3 C34-1 JP4-1 C32-1 U6-1 U6-24 JP3-3 R53-1 C33-1 JP2-1) + ) + (net FAN_GATE + (pins Rg-2 Rgs-1) + ) + (net /IGATE + (pins Q7-4 U6-15) + ) + (net /VIN_SW + (pins Q7-5 Q7-6 Q7-7 Q7-8 RS1-2 U6-7) + ) + (net /I2C_SDA + (pins R31-2 U3-1 U4-6 P5-3 J2-15) + ) + (net /MODEM_LED + (pins Rmled-1 J8-8) + ) + (net /MODEM_LED_A + (pins Rmled-2 D4G-2) + ) + (net /I2C_SCL + (pins U3-2 U4-1 P5-4 R30-2 J2-14) + ) + (net /3V3_MODEM + (pins J7-1 R60-1 J8-7 C41-1 C43-1 L7-2) + ) + (net /DOUT_4G + (pins J7-2 MOD1-17) + ) + (net /MODEM_RST + (pins J7-5 SW4G-1) + ) + (net /USB_VBUS + (pins J7-6 J9-A4 J9-A9 J9-B4 J9-B9) + ) + (net /USB_DP + (pins J7-7 J9-A6 J9-B6) + ) + (net /USB_DM + (pins J7-8 J9-A7 J9-B7) + ) + (net "unconnected-(J7-Pin_9-Pad9)" + (pins J7-9) + ) + (net /VEH5V + (pins RS1-1 P2-1 R55-1 JP1-2 U6-6 U6-16 R51-1 C31-1 C30-1 R7-1) + ) + (net /LED_A + (pins R3-2 P8-1 D1-2) + ) + (net /24V_IN + (pins D10-1 P1-1) + ) + (net COMP_FAN + (pins Rcomp-1 U2-3) + ) + (net /BASE_LS + (pins Q5-1 R1-2) + ) + (net /FB_FAN + (pins R20-2 U2-4 R21-1) + ) + (net BST_FAN + (pins Cbst-1 U2-8) + ) + (net /USART1_TX + (pins H3-1 K1-10 J2-6) + ) + (net /SW_BAT + (pins L6-1 U6-21 U6-22) + ) + (net "unconnected-(U4-ALERT-Pad3)" + (pins U4-3) + ) + (net /BATLED3 + (pins RB3-1 J2-3) + ) + (net /BLED3 + (pins RB3-2 DB3-2) + ) + (net /CLPROG_TP + (pins TP1-1 U6-3) + ) + (net "unconnected-(J8-Pin_2-Pad2)" + (pins J8-2) + ) + (net "unconnected-(J8-Pin_3-Pad3)" + (pins J8-3) + ) + (net "unconnected-(J8-Pin_4-Pad4)" + (pins J8-4) + ) + (net "unconnected-(J8-Pin_5-Pad5)" + (pins J8-5) + ) + (net "unconnected-(J8-Pin_9-Pad9)" + (pins J8-9) + ) + (net FREQ_FAN + (pins U2-6 Rfreq-1) + ) + (net 24V + (pins U2-7 C22-1 C11-1 DzG-3 C10-1 Ren1-1) + ) + (net /BATLED4 + (pins RB4-1 J2-4) + ) + (net /BLED4 + (pins RB4-2 DB4-2) + ) + (net /USB_CC1 + (pins Rcc1-1 J9-A5) + ) + (net /F0_SEL + (pins JP4-2 U6-14) + ) + (net /LED_K + (pins P8-2 D1-1) + ) + (net /Q6_BASE + (pins R41-1 R40-2 Q6-1) + ) + (net /BATLED2 + (pins RB2-1 J2-2) + ) + (net /USB_CC2 + (pins Rcc2-1 J9-B5) + ) + (net IGN_IN + (pins P1-3 Rig-1) + ) + (net "unconnected-(P1-Pin_4-Pad4)" + (pins P1-4) + ) + (net "unconnected-(P1-Pin_5-Pad5)" + (pins P1-5) + ) + (net /SW_IN + (pins F1-2) + ) + (net /PFI + (pins R52-1 U6-19 R51-2) + ) + (net /KCOIL + (pins K1-9 Q6-2 D6-2) + ) + (net /BATLED1 + (pins J2-1 RB1-1) + ) + (net /CHRG_EN + (pins J2-5 R56-1 U6-4) + ) + (net "unconnected-(J2-Pin_8-Pad8)" + (pins J2-8) + ) + (net "unconnected-(J2-Pin_9-Pad9)" + (pins J2-9) + ) + (net "unconnected-(J2-Pin_10-Pad10)" + (pins J2-10) + ) + (net /CHRG_STAT + (pins J2-11 U6-8 R57-2) + ) + (net /CHRG_FAULT + (pins J2-12 U6-9 R58-2) + ) + (net /BYP_CTRL + (pins J2-13 R40-1) + ) + (net "unconnected-(J2-Pin_16-Pad16)" + (pins J2-16) + ) + (net "unconnected-(J2-Pin_17-Pad17)" + (pins J2-17) + ) + (net Q10_GATE + (pins DzG-1 Rrp-1) + ) + (net /PROG + (pins U6-2 R50-1) + ) + (net /VFB_BST + (pins U6-10 U6-18 R53-2 R54-1) + ) + (net "unconnected-(U6-RST-Pad11)" + (pins U6-11) + ) + (net /F2_SEL + (pins U6-12 JP2-2) + ) + (net /F1_SEL + (pins U6-13 JP3-2) + ) + (net /PFO_TP + (pins U6-20 TP2-1) + ) + (net "unconnected-(MOD1-NC-Pad1)" + (pins MOD1-1) + ) + (net "unconnected-(MOD1-RESET-Pad3)" + (pins MOD1-3) + ) + (net "unconnected-(MOD1-3V3_OUT-Pad4)" + (pins MOD1-4) + ) + (net "unconnected-(MOD1-VIN-Pad8)" + (pins MOD1-8) + ) + (net "unconnected-(MOD1-A0-Pad9)" + (pins MOD1-9) + ) + (net "unconnected-(MOD1-A1-Pad10)" + (pins MOD1-10) + ) + (net "unconnected-(MOD1-A2-Pad11)" + (pins MOD1-11) + ) + (net "unconnected-(MOD1-A3-Pad12)" + (pins MOD1-12) + ) + (net "unconnected-(MOD1-A4-Pad13)" + (pins MOD1-13) + ) + (net "unconnected-(MOD1-A5-Pad14)" + (pins MOD1-14) + ) + (net "unconnected-(MOD1-D3-Pad18)" + (pins MOD1-18) + ) + (net "unconnected-(MOD1-D4-Pad19)" + (pins MOD1-19) + ) + (net "unconnected-(MOD1-D5-Pad20)" + (pins MOD1-20) + ) + (net "unconnected-(MOD1-D6-Pad21)" + (pins MOD1-21) + ) + (net "unconnected-(MOD1-D7-Pad22)" + (pins MOD1-22) + ) + (net "unconnected-(MOD1-D9-Pad24)" + (pins MOD1-24) + ) + (net "unconnected-(MOD1-D10-Pad25)" + (pins MOD1-25) + ) + (net "unconnected-(MOD1-FENCE_D11-Pad26)" + (pins MOD1-26) + ) + (net "unconnected-(MOD1-EXTINT_D12-Pad27)" + (pins MOD1-27) + ) + (net "unconnected-(MOD1-TPS_D13-Pad28)" + (pins MOD1-28) + ) + (net "unconnected-(MOD1-AREF-Pad30)" + (pins MOD1-30) + ) + (net "unconnected-(MOD1-SDA-Pad31)" + (pins MOD1-31) + ) + (net "unconnected-(MOD1-SCL-Pad32)" + (pins MOD1-32) + ) + (class kicad_default /24V_IN /3V3_MODEM /5V_FAN /5V_SENSE /BASE_LS /BATLED1 + /BATLED2 /BATLED3 /BATLED4 /BAT_PLUS /BAT_SENSE /BLED1 /BLED2 /BLED3 + /BLED4 /BST3 /BYP_CTRL /CHRG_EN /CHRG_FAULT /CHRG_STAT /CLPROG_TP /COMP3 + /COMP3_C /DIN_4G /DOUT_4G /EN_FAN /F0_SEL /F1_SEL /F2_SEL /FAN_RET /FB3 + /FB_FAN /FREQ3 /GATE_LS /GNSS_RX /GNSS_TX /I2C_SCL /I2C_SDA /IGATE /KCOIL + /LED_A /LED_K /MAIN5V /MODEM_LED /MODEM_LED_A /MODEM_RST /NRST /NTC + /NTC_TEMP /PFI /PFO_TP /PROG /PWR_CTRL /Q6_BASE /SW3_NODE /SW_5V /SW_BAT + /SW_IN /SYS5V /USART1_TX /USB_CC1 /USB_CC2 /USB_DM /USB_DP /USB_VBUS + /VEH5V /VFB_BST /VIN_SW 3V3 BST_FAN CC_FAN COMP_FAN EXT_LED FAN_GATE + FAN_PWM FAN_TACH FAN_TACH_RAW FREQ_FAN GND IGN_SENSE Q10_GATE USART1_RX + "unconnected-(J1-Pin_1-Pad1)" "unconnected-(J1-Pin_13-Pad13)" "unconnected-(J1-Pin_16-Pad16)" + "unconnected-(J1-Pin_2-Pad2)" "unconnected-(J1-Pin_3-Pad3)" "unconnected-(J1-Pin_4-Pad4)" + "unconnected-(J2-Pin_10-Pad10)" "unconnected-(J2-Pin_16-Pad16)" "unconnected-(J2-Pin_17-Pad17)" + "unconnected-(J2-Pin_8-Pad8)" "unconnected-(J2-Pin_9-Pad9)" "unconnected-(J7-Pin_9-Pad9)" + "unconnected-(J8-Pin_2-Pad2)" "unconnected-(J8-Pin_3-Pad3)" "unconnected-(J8-Pin_4-Pad4)" + "unconnected-(J8-Pin_5-Pad5)" "unconnected-(J8-Pin_9-Pad9)" "unconnected-(MOD1-3V3_OUT-Pad4)" + "unconnected-(MOD1-A0-Pad9)" "unconnected-(MOD1-A1-Pad10)" "unconnected-(MOD1-A2-Pad11)" + "unconnected-(MOD1-A3-Pad12)" "unconnected-(MOD1-A4-Pad13)" "unconnected-(MOD1-A5-Pad14)" + "unconnected-(MOD1-AREF-Pad30)" "unconnected-(MOD1-D10-Pad25)" "unconnected-(MOD1-D3-Pad18)" + "unconnected-(MOD1-D4-Pad19)" "unconnected-(MOD1-D5-Pad20)" "unconnected-(MOD1-D6-Pad21)" + "unconnected-(MOD1-D7-Pad22)" "unconnected-(MOD1-D9-Pad24)" "unconnected-(MOD1-EXTINT_D12-Pad27)" + "unconnected-(MOD1-FENCE_D11-Pad26)" "unconnected-(MOD1-NC-Pad1)" "unconnected-(MOD1-RESET-Pad3)" + "unconnected-(MOD1-SCL-Pad32)" "unconnected-(MOD1-SDA-Pad31)" "unconnected-(MOD1-TPS_D13-Pad28)" + "unconnected-(MOD1-VIN-Pad8)" "unconnected-(P1-Pin_4-Pad4)" "unconnected-(P1-Pin_5-Pad5)" + "unconnected-(U4-ALERT-Pad3)" "unconnected-(U6-RST-Pad11)" + (circuit + (use_via "Via[0-3]_600:300_um") + ) + (rule + (width 200) + (clearance 200) + ) + ) + (class PWR_MID 24V IGN_IN SW_FAN + (circuit + (use_via "Via[0-3]_800:400_um") + ) + (rule + (width 1000) + (clearance 200) + ) + ) + ) + (wiring + (wire (path F.Cu 1500 155452 -56185.8 155452 -56323.1)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 168192 -59323.1 169648 -57867)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 188746 -57867 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 169648 -57867 188746 -57867)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 145054 -46323.1 151533 -52802.2 152068 -52802.2 155452 -56185.8)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 194265 -63386.8 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 201342 -61823.1 199778 -63386.8)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 138292 -46323.1 145054 -46323.1)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 199778 -63386.8 194265 -63386.8)(net /SYS5V)(type route)) + (wire (path B.Cu 1500 157534 -58405.6 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path B.Cu 1500 155452 -56323.1 157534 -58405.6)(net /SYS5V)(type route)) + (wire (path In2.Cu 1500 150372 -74103.1 150372 -64033.5 155452 -58953.5 155452 -56323.1)(net /SYS5V)(type route)) + (wire (path B.Cu 200 163333 -77836.4 173205 -77836.4 174192 -78823.1)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 126209 -53120.5 138642 -53120.5)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 141482 -56716.8 144349 -59584)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 141482 -55960.4 141482 -56716.8)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 119843 -46323.1 119843 -46755)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 138642 -53120.5 141482 -55960.4)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 119843 -46755 126209 -53120.5)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 144349 -59584 158919 -59584 160281 -60946)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 118692 -46323.1 119843 -46323.1)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 176487 -78823.1 189284 -66025.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 174192 -78823.1 176487 -78823.1)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 160281 -60946 160281 -74783.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 194364 -66025.6 189284 -66025.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 160281 -74783.6 163333 -77836.4)(net /DIN_4G)(type route)) + (wire (path F.Cu 200 196542 -84823.1 199123 -84823.1)(net GND)(type route)) + (wire (path F.Cu 200 199100 -92850 199073 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 129479 -118323 128262 -118323)(net GND)(type route)) + (wire (path F.Cu 200 198042 -61823.1 197782 -61823.1)(net GND)(type route)) + (wire (path F.Cu 200 196542 -92823.1 199073 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 137742 -112373 137692 -112323)(net GND)(type route)) + (wire (path F.Cu 200 121742 -94323.1 121242 -94823.1)(net GND)(type route)) + (wire (path F.Cu 200 137742 -113983 137742 -112373)(net GND)(type route)) + (wire (path F.Cu 200 172327 -92823.1 172300 -92850)(net GND)(type route)) + (wire (path F.Cu 1000 100542 -74323.1 99291.6 -74323.1)(net GND)(type route)) + (wire (path F.Cu 200 124892 -117923 125862 -117923 126002 -118063)(net GND)(type route)) + (wire (path F.Cu 200 172800 -80800 172823 -80823.1)(net GND)(type route)) + (wire (path F.Cu 200 132902 -118823 137742 -113983)(net GND)(type route)) + (wire (path F.Cu 200 154815 -63373.1 154882 -63306.3)(net GND)(type route)) + (wire (path F.Cu 200 184129 -63323.1 184506 -62946.4)(net GND)(type route)) + (wire (path F.Cu 200 199123 -84823.1 199150 -84850)(net GND)(type route)) + (wire (path F.Cu 200 152367 -64323.1 147692 -64323.1)(net GND)(type route)) + (wire (path F.Cu 200 121242 -94823.1 119792 -94823.1)(net GND)(type route)) + (wire (path F.Cu 200 153317 -63373.1 152367 -64323.1)(net GND)(type route)) + (wire (path F.Cu 200 166542 -59323.1 165740 -58521.1)(net GND)(type route)) + (wire (path F.Cu 200 184506 -62946.4 187990 -62946.4)(net GND)(type route)) + (wire (path F.Cu 200 161855 -58521.1 160694 -59682.2)(net GND)(type route)) + (wire (path F.Cu 200 126002 -118063 128002 -118063)(net GND)(type route)) + (wire (path F.Cu 200 174192 -92823.1 172327 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 165740 -58521.1 161855 -58521.1)(net GND)(type route)) + (wire (path F.Cu 200 128002 -118063 128262 -118323)(net GND)(type route)) + (wire (path F.Cu 200 153317 -63373.1 154815 -63373.1)(net GND)(type route)) + (wire (path F.Cu 200 130904 -118823 132902 -118823)(net GND)(type route)) + (wire (path F.Cu 200 174192 -80823.1 172823 -80823.1)(net GND)(type route)) + (wire (path F.Cu 200 197782 -61823.1 194364 -58405.6)(net GND)(type route)) + (wire (path In2.Cu 200 155615 -62572.8 157803 -62572.8)(net GND)(type route)) + (wire (path In2.Cu 200 194364 -58405.6 192531 -58405.6)(net GND)(type route)) + (wire (path In2.Cu 200 157803 -62572.8 160694 -59682.2)(net GND)(type route)) + (wire (path In2.Cu 200 192531 -58405.6 187990 -62946.4)(net GND)(type route)) + (wire (path In2.Cu 200 154882 -63306.3 155615 -62572.8)(net GND)(type route)) + (wire (path F.Cu 200 120490 -67486.2 102379 -67486.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100542 -72860.5 100542 -69323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102379 -67486.2 100542 -69323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 97851.6 -82803.1 97446.6 -83208.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 98258.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 96956.6 -83208.1 96841.6 -83323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 97446.6 -83208.1 96956.6 -83208.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 102192 -74323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 100542 -72860.5)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100817 -83872.7 100361 -84328.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 98258.1 -78069.3 98158.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100817 -83323.1 100817 -83872.7)(net IGN_SENSE)(type route)) + (wire (path B.Cu 200 121429 -67486.2 120490 -67486.2)(net IGN_SENSE)(type route)) + (wire (path B.Cu 200 132592 -56323.1 121429 -67486.2)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97853.1 -78374.4 98158.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97853.1 -82801.7 97853.1 -78374.4)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -82803.1 97851.6 -83206.7)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -82803.1 97853.1 -82801.7)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -83206.7 98973.1 -84328.2 100361 -84328.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 1000 171692 -54799 171692 -54633.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -47823.1 183392 -49214.2 183392 -49005.2)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170877 -54799 171692 -54799)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 172322 -55429.6 171692 -54799)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170397 -44118.2 169192 -45323.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -49005.2 178505 -44118.2 170397 -44118.2)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -49214.2 182627 -49978.6 182627 -51369.7 178567 -55429.6)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 168192 -63823.1 166684 -63823.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 178567 -55429.6 172322 -55429.6)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170313 -55362.6 170877 -54799)(net SW_FAN)(type route)) + (wire (path In2.Cu 1000 170313 -55362.6 170313 -60194.3 166684 -63823.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 95479.9 -85145.6 95479.9 -82751.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 98837.1 -79472.8 99038.8 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 170298 -73436 198579 -73436)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 174274 -46687.7 176504 -46687.7)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 198579 -73436 210192 -61823.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -80323.1 164892 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 92191.6 -88433.9 95479.9 -85145.6)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 99038.8 -79271.1 164892 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -78842.6 170298 -73436)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 179603 -49835.2 178792 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 191192 -47823.1 191192 -49391.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 178792 -49835.2 178792 -51223.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 191192 -49391.1 190531 -50051.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -79271.1 164892 -78842.6)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 176504 -46687.7 178792 -48974.9 178792 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 95479.9 -82751.9 98759.1 -79472.8 98837.1 -79472.8)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 173042 -45455.8 174274 -46687.7)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 92191.6 -98323.1 92191.6 -88433.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 173042 -45323.1 173042 -45455.8)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 190531 -50052 190531 -50051.9)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 198421 -50052 190531 -50052)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 210192 -61823.1 198421 -50052)(net /5V_FAN)(type route)) + (wire (path In2.Cu 1000 190314 -49835.2 179603 -49835.2)(net /5V_FAN)(type route)) + (wire (path In2.Cu 1000 190531 -50051.9 190314 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 98084.2 -100216 102590 -100216)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 107183 -96377.2 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 107129 -96323.1 107183 -96377.2)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 96191.6 -98323.1 98084.2 -100216)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 138289 -93500 138077 -93287.7)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122351 -93362 115854 -93362)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 126177 -93500 125896 -93219.3)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 129723 -93500 126177 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 111851 -93200.5 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 130862 -93809.4 130032 -93809.4)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122515 -93219.3 122362 -93373.1)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 154715 -93359.8 154575 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 135761 -93288.9 131382 -93288.9)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 138077 -93287.7 135762 -93287.7)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 115693 -93200.5 111851 -93200.5)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 135762 -93287.7 135761 -93288.9)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122362 -93373.1 122351 -93362)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 125896 -93219.3 122515 -93219.3)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 115854 -93362 115693 -93200.5)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 130032 -93809.4 129723 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 154575 -93500 138289 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 131382 -93288.9 130862 -93809.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 108674 -96482.3 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 169143 -78932.1 154715 -93359.8)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 196064 -60271.9 192081 -60271.9 188028 -64325.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 182347 -64325.4 169143 -77529.2)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 197013 -59323.1 196064 -60271.9)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 188028 -64325.4 182347 -64325.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 102590 -100216 104941 -100216)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 169143 -77529.2 169143 -78932.1)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 210192 -59323.1 197013 -59323.1)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 104941 -100216 108674 -96482.3)(net /FAN_RET)(type route)) + (wire (path F.Cu 200 175017 -59323.1 175017 -59560.9)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 177367 -59323.1 175017 -59323.1)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 173407 -53346.3 171708 -53346.3)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 175017 -59560.9 174361 -60216.8)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 171708 -53346.3 171692 -53363.1)(net /EN_FAN)(type route)) + (wire (path In2.Cu 200 173407 -59262.7 173407 -53346.3)(net /EN_FAN)(type route)) + (wire (path In2.Cu 200 174361 -60216.8 173407 -59262.7)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 199079 -44435.6 199079 -48323.1)(net /BLED2)(type route)) + (wire (path F.Cu 200 199192 -44323.1 199079 -44435.6)(net /BLED2)(type route)) + (wire (path F.Cu 1500 119022 -107288 116832 -109478)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 120309 -100012 126502 -100012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 121092 -90453.1 121242 -90603.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119022 -107288 119151 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129242 -97272.5 129242 -96323.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129891 -89262.7 129892 -89263.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126861 -89262.7 129891 -89262.7)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 120542 -89873.1 121092 -90423.1 121092 -90453.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 210192 -108323 210019 -108323)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119542 -89873.1 120542 -89873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119382 -89423.1 119382 -89713.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -95993.1 143252 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119151 -107416 154762 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 173543 -104510 173543 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -107416 167047 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126502 -100012 129242 -97272.5)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 91715.6 -111012 91935.6 -111012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 167047 -107416 169640 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 172568 -104823 173543 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 171592 -104823 169640 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -107416 154762 -95993.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 117448 -102873 120309 -100012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 801.4 91715.6 -112024 91416.6 -112323)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129892 -89263.1 134672 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 177187 -100866 173543 -104510)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 210019 -108323 202561 -100866)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119022 -107288 117448 -105714 117448 -102873)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 93354.2 -109593 93354.2 -109585)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 91935.6 -111012 93354.2 -109593)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 801.4 91715.6 -111012 91715.6 -112024)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 121242 -90603.1 121242 -91873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119382 -89713.1 119542 -89873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 202561 -100866 177187 -100866)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126822 -89223.1 126861 -89262.7)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 172568 -104823 171592 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 134672 -84483.1 143252 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119492 -89423.1 119612 -89303.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 124472 -92033.1 125532 -90973.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1000 126822 -89223.1 126752 -89223.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119382 -89423.1 119492 -89423.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1500 116832 -109478 93460.6 -109478)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 124472 -92083.1 124472 -92033.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119612 -89303.1 120872 -89303.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1500 93460.6 -109478 93354.2 -109585)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 123652 -92083.1 124472 -92083.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1000 126752 -89223.1 126702 -89272.7)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 125532 -90973.1 125532 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 750 125542 -90433.1 125532 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 126702 -89272.7 125542 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 120872 -89303.1 123652 -92083.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 104619 -105396 115743 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 124343 -93823.1 123692 -93823.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125472 -94023.1 125281 -94023.1)(net /NTC)(type route)) + (wire (path F.Cu 200 124443 -93723.1 124343 -93823.1)(net /NTC)(type route)) + (wire (path F.Cu 200 102692 -107323 104619 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 124981 -93723.1 124443 -93723.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125281 -94023.1 124981 -93723.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125492 -94043.1 125472 -94023.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125532 -94123.1 125492 -94083.1 125492 -94043.1)(net /NTC)(type route)) + (wire (path B.Cu 200 128135 -94457.5 129547 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 126120 -94245 127923 -94245)(net /NTC)(type route)) + (wire (path B.Cu 200 137259 -94090.6 137746 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 202478 -94457.5 210192 -102171)(net /NTC)(type route)) + (wire (path B.Cu 200 127923 -94245 128135 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 137258 -94089.4 137259 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 136093 -94090.6 136094 -94089.4)(net /NTC)(type route)) + (wire (path B.Cu 200 125702 -94253.1 125712 -94263.1 126102 -94263.1)(net /NTC)(type route)) + (wire (path B.Cu 200 129547 -94457.5 129700 -94611.1 131194 -94611.1)(net /NTC)(type route)) + (wire (path B.Cu 200 125532 -94123.1 125662 -94253.1)(net /NTC)(type route)) + (wire (path B.Cu 200 137746 -94090.6 138113 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 136094 -94089.4 137258 -94089.4)(net /NTC)(type route)) + (wire (path B.Cu 200 210192 -102171 210192 -103323)(net /NTC)(type route)) + (wire (path B.Cu 200 131194 -94611.1 131714 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 125662 -94253.1 125702 -94253.1)(net /NTC)(type route)) + (wire (path B.Cu 200 131714 -94090.6 136093 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 126102 -94263.1 126120 -94245)(net /NTC)(type route)) + (wire (path B.Cu 200 138113 -94457.5 202478 -94457.5)(net /NTC)(type route)) + (wire (path In2.Cu 200 116719 -105396 125772 -96343.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 125772 -94363.1 125532 -94123.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 125772 -96343.1 125772 -94363.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 115743 -105396 116719 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 117352 -56323.1 118503 -57474.8 124193 -57474.8)(net /NRST)(type route)) + (wire (path B.Cu 200 199192 -133323 205692 -133323)(net /NRST)(type route)) + (wire (path In2.Cu 200 210167 -80073.1 205692 -84548.1)(net /NRST)(type route)) + (wire (path In2.Cu 200 144462 -89823.7 184842 -130204)(net /NRST)(type route)) + (wire (path In2.Cu 200 141482 -73733.8 141482 -76531.3)(net /NRST)(type route)) + (wire (path In2.Cu 200 205692 -84548.1 205692 -133323)(net /NRST)(type route)) + (wire (path In2.Cu 200 184842 -130204 196072 -130204)(net /NRST)(type route)) + (wire (path In2.Cu 200 125223 -57474.8 141482 -73733.8)(net /NRST)(type route)) + (wire (path In2.Cu 200 141482 -76531.3 144462 -79511.3 144462 -89823.7)(net /NRST)(type route)) + (wire (path In2.Cu 200 124193 -57474.8 125223 -57474.8)(net /NRST)(type route)) + (wire (path In2.Cu 200 196072 -130204 199192 -133323)(net /NRST)(type route)) + (wire (path F.Cu 200 175842 -49448.1 175842 -52698.1)(net CC_FAN)(type route)) + (wire (path F.Cu 1000 185607 -115685 184346 -115685)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 187097 -116027 185949 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 163792 -118323 165493 -118323)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 200097 -114478 198548 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 188692 -107616 188692 -109823)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 183752 -115091 168726 -115091)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 186492 -103823 188692 -106023)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 185949 -116027 185607 -115685)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 168726 -115091 165493 -118323)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 198548 -116027 187097 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 184346 -115685 183752 -115091)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 188692 -106023 188692 -107616)(net /SW3_NODE)(type route)) + (wire (path In2.Cu 1000 187097 -109211 188692 -107616)(net /SW3_NODE)(type route)) + (wire (path In2.Cu 1000 187097 -116027 187097 -109211)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 171223 -113084 141911 -113084)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 200097 -113208 202137 -113208)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 157045 -62479.4 156118 -63406.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 157045 -53576.6 157045 -62479.4)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 155281 -64323.1 156118 -63486.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 171617 -113477 193556 -113477)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 174078 -95373.1 171760 -97690.9)(net /SW_5V)(type route)) + (wire (path F.Cu 601 194877 -113477 195147 -113208)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 210192 -95323.1 179742 -95323.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 154692 -51223.1 157045 -53576.6)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 202137 -113208 202152 -113193)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 155192 -64323.1 155281 -64323.1)(net /SW_5V)(type route)) + (wire (path F.Cu 601 193556 -113477 194877 -113477)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 141911 -113084 125412 -129583)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 179742 -95323.1 179692 -95373.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 171617 -113477 171223 -113084)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 179692 -95373.1 174078 -95373.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 156118 -63486.1 156118 -63406.1)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 196852 -118493 176633 -118493)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 202152 -113193 196852 -118493)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 176633 -118493 171617 -113477)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 167171 -102280 171760 -97690.9)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 156118 -63406.1 157010 -64297.8 157010 -87333.1)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 167171 -109032 167171 -102280)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 153505 -90838.3 153505 -93892)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 157010 -87333.1 153505 -90838.3)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 171617 -113477 167171 -109032)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 153505 -93892 161893 -102280 167171 -102280)(net /SW_5V)(type route)) + (wire (path F.Cu 200 203712 -111938 200097 -111938)(net /COMP3)(type route)) + (wire (path F.Cu 200 179937 -117393 200252 -117393)(net /COMP3)(type route)) + (wire (path F.Cu 200 178867 -116323 179937 -117393)(net /COMP3)(type route)) + (wire (path F.Cu 200 200252 -117393 203712 -113933 203712 -111938)(net /COMP3)(type route)) + (wire (path F.Cu 200 180867 -109498 181474 -109498)(net /FB3)(type route)) + (wire (path F.Cu 200 200097 -110668 197015 -110668)(net /FB3)(type route)) + (wire (path F.Cu 200 178692 -107323 180867 -109498)(net /FB3)(type route)) + (wire (path F.Cu 200 197015 -110668 196891 -110544)(net /FB3)(type route)) + (wire (path F.Cu 200 180342 -102323 188670 -102323)(net /FB3)(type route)) + (wire (path In2.Cu 200 196891 -110544 188670 -102323)(net /FB3)(type route)) + (wire (path In2.Cu 200 181474 -109498 188650 -102323 188670 -102323)(net /FB3)(type route)) + (wire (path F.Cu 200 195147 -111938 194484 -112601 179469 -112601 178692 -111823)(net /FREQ3)(type route)) + (wire (path F.Cu 200 192976 -114752 194873 -114752 195147 -114478)(net /BST3)(type route)) + (wire (path F.Cu 200 187142 -109823 187142 -107718)(net /BST3)(type route)) + (wire (path In2.Cu 200 189077 -106797 192976 -110696)(net /BST3)(type route)) + (wire (path In2.Cu 200 188062 -106797 189077 -106797)(net /BST3)(type route)) + (wire (path In2.Cu 200 192976 -110696 192976 -114752)(net /BST3)(type route)) + (wire (path In2.Cu 200 187142 -107718 188062 -106797)(net /BST3)(type route)) + (wire (path F.Cu 200 195079 -44435.6 195079 -48323.1)(net /BLED1)(type route)) + (wire (path F.Cu 200 195192 -44323.1 195079 -44435.6)(net /BLED1)(type route)) + (wire (path F.Cu 200 94447.1 -110943 94447.1 -109167)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 91416.6 -116323 93066.6 -114673)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93779.8 -108499 92677.9 -108499)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -112323 94447.1 -110943)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 94447.1 -109167 93779.8 -108499)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 92677.9 -108499 92096.6 -109080)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 97108.9 -113131 97916.6 -112323)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -113131 93066.6 -112323)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -114673 93066.6 -113131 97108.9 -113131)(net /BAT_SENSE)(type route)) + (wire (path B.Cu 200 92198.6 -67700.9 108514 -67700.9 119892 -56323.1)(net /BAT_SENSE)(type route)) + (wire (path In2.Cu 200 90491.4 -107475 92096.6 -109080)(net /BAT_SENSE)(type route)) + (wire (path In2.Cu 200 92198.6 -67700.9 90491.4 -69408.1 90491.4 -107475)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 163042 -59323.1 163042 -60171.8 161642 -61571.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 122432 -56323.1 123607 -55147.7)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 136402 -55959.1 136402 -56716.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 141635 -61949.4 161264 -61949.4)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 135590 -55147.7 136402 -55959.1)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 161264 -61949.4 161642 -61571.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 136402 -56716.2 141635 -61949.4)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 123607 -55147.7 135590 -55147.7)(net /PWR_CTRL)(type route)) + (wire (path F.Cu 200 149373 -81460.8 155736 -87823.1 207692 -87823.1)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 149373 -81323.1 149373 -81460.8)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 209040 -89171.4 210192 -89171.4)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 210192 -90323.1 210192 -89171.4)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 148272 -81323.1 149373 -81323.1)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 207692 -87823.1 209040 -89171.4)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 133931 -65282.9 124972 -56323.1)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 135598 -65282.9 133931 -65282.9)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 144022 -75971.4 144022 -73706.3)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 148272 -81323.1 148272 -80221.4 144022 -75971.4)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 144022 -73706.3 135598 -65282.9)(net /GNSS_TX)(type route)) + (wire (path B.Cu 200 158413 -87823.1 151913 -81323.1)(net /GNSS_RX)(type route)) + (wire (path B.Cu 200 210192 -87823.1 158413 -87823.1)(net /GNSS_RX)(type route)) + (wire (path B.Cu 200 150812 -81323.1 151913 -81323.1)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 146562 -73708 146562 -75971.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 134709 -61855.3 146562 -73708)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 127512 -56323.1 133044 -61855.3)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 146562 -75971.4 150812 -80221.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 150812 -81323.1 150812 -80221.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 133044 -61855.3 134709 -61855.3)(net /GNSS_RX)(type route)) + (wire (path F.Cu 200 95416.6 -116323 98324.8 -113415)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 106092 -112323 106832 -111583)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 106092 -112323 103742 -112323)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 102650 -113415 103742 -112323)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 98324.8 -113415 102650 -113415)(net /5V_SENSE)(type route)) + (wire (path B.Cu 200 130052 -56323.1 115962 -70412.6 94238.2 -70412.6)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 94238.2 -70412.6 92764.9 -71886 92764.9 -97592.9)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 106755 -111583 106832 -111583)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 92764.9 -97592.9 106755 -111583)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 115742 -112323 118142 -112323 121716 -108749 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path B.Cu 200 210192 -121323 176973 -121323 169737 -114087)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152455 -95314.8 152455 -97248.9)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152807 -97601.5 153252 -97601.5)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 142752 -56323.1 142752 -67123.1)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152455 -97248.9 152807 -97601.5)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 142752 -67123.1 149102 -73473.1 149102 -75898.1 152177 -78973.9)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 169737 -114087 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152177 -78973.9 152177 -95037.4 152455 -95314.8)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 153252 -97601.5 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path F.Cu 200 187004 -114635 187192 -114823)(net /COMP3_C)(type route)) + (wire (path F.Cu 200 185252 -114635 187004 -114635)(net /COMP3_C)(type route)) + (wire (path F.Cu 200 180517 -116323 180985 -116791 185103 -116791)(net /COMP3_C)(type route)) + (wire (path In2.Cu 200 185252 -114635 185103 -114784 185103 -116791)(net /COMP3_C)(type route)) + (wire (path F.Cu 1500 130042 -103378 130042 -104323)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139938 -98598.2 142011 -96525)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 121305 -101985 124692 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119466 -91546.2 118024 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -91323.1 134042 -90777.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139819 -99823.1 139938 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 138622 -101293 132642 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 115034 -91546.2 112720 -89232.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 142692 -96525 142692 -94823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 601 112082 -87882.3 110261 -87882.3)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110242 -87863.1 110242 -86593.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -101293 132642 -92722.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139546 -100369 139819 -100096)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -90777.2 134951 -89867.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 120166 -91045.8 119967 -91045.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 124692 -101985 128649 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 126424 -91189.8 125649 -91964.4)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139938 -99823.1 139938 -98598.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 136885 -90323.1 139940 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 112720 -89232.7 112720 -88520.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119192 -104099 121305 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 112720 -88520.1 112082 -87882.3)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 124692 -104323 124692 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 119466 -92497.9 119792 -92823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134951 -89867.7 136430 -89867.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139819 -100096 139819 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119192 -104323 119192 -104099)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -91323.1 133908 -91189.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -101293 132127 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139546 -100369 138622 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 136430 -89867.7 136885 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 133908 -91189.8 126424 -91189.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132127 -101293 130042 -103378)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139938 -99823.1 140092 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 128649 -101985 130042 -103378)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 119466 -91546.2 119466 -92497.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139940 -90323.1 140092 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119967 -91045.8 119466 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 120166 -91045.8 120166 -91297.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110251 -87872.7 110242 -87863.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 118024 -91546.2 115034 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110242 -86593.1 110242 -85323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 118024 -91808.1 118024 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -92722.9 134042 -91323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 120166 -91297.9 120742 -91873.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 601 110261 -87882.3 110251 -87872.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 142011 -96525 142692 -96525)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 109812 -83596.2 118024 -91808.1)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 101516 -77180.1 101516 -81198.9 103288 -82970.8)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 103846 -82970.8 104472 -83596.2 109812 -83596.2)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 103288 -82970.8 103846 -82970.8)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 132135 -42666.6 135792 -46323.1)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125618 -92086.6 125618 -91995.2)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 100536 -62101.7 96374.8 -57940.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125126 -92579.4 125618 -92086.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 118796 -92579.4 125126 -92579.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 96374.8 -45076.4 98784.6 -42666.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 96374.8 -57940.4 96374.8 -45076.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 98784.6 -42666.6 132135 -42666.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 100536 -76200.4 100536 -62101.7)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 101516 -77180.1 100536 -76200.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125618 -91995.2 125649 -91964.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 118024 -91808.1 118796 -92579.4)(net /MAIN5V)(type route)) + (wire (path F.Cu 200 93366.6 -94323.1 93366.6 -93338.1)(net FAN_PWM)(type route)) + (wire (path B.Cu 200 134564 -56323.1 118720 -72166.6 96481.1 -72166.6)(net FAN_PWM)(type route)) + (wire (path B.Cu 200 135132 -56323.1 134564 -56323.1)(net FAN_PWM)(type route)) + (wire (path In2.Cu 200 93366.6 -75281 96481.1 -72166.6)(net FAN_PWM)(type route)) + (wire (path In2.Cu 200 93366.6 -93338.1 93366.6 -75281)(net FAN_PWM)(type route)) + (wire (path F.Cu 200 99335.9 -93353.8 99480.8 -93353.8)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 98366.6 -94323.1 95016.6 -94323.1)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 105165 -95462.2 105254 -95373.1)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 98366.6 -94323.1 99335.9 -93353.8)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 102921 -95462.2 105165 -95462.2)(net FAN_GATE)(type route)) + (wire (path In2.Cu 200 99480.8 -93353.8 100813 -93353.8 102921 -95462.2)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 124832 -95023.1 124732 -94923.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 125122 -95023.1 124832 -95023.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 112482 -91373.7 113057 -91373.7)(net /IGATE)(type route)) + (wire (path F.Cu 200 124272 -94823.1 123692 -94823.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 124732 -94923.1 124372 -94923.1 124272 -94823.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 110242 -89133.1 112482 -91373.7)(net /IGATE)(type route)) + (wire (path F.Cu 200 125152 -94993.1 125122 -95023.1)(net /IGATE)(type route)) + (wire (path In2.Cu 200 125152 -94993.1 125122 -95023.1)(net /IGATE)(type route)) + (wire (path In2.Cu 200 119025 -95023.1 115376 -91373.7 113057 -91373.7)(net /IGATE)(type route)) + (wire (path In2.Cu 200 125122 -95023.1 119025 -95023.1)(net /IGATE)(type route)) + (wire (path F.Cu 1000 101654 -88323.1 105533 -88323.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -85323.1 115192 -86593.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 105533 -88323.1 113223 -96013.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 101654 -88323.1 106356 -83621.4)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 113223 -96013.1 118622 -96013.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 113490 -83621.4 115192 -85323.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 250.2 119112 -96503.1 119792 -95823.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -87863.1 115192 -89133.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 106356 -83621.4 113490 -83621.4)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -86593.1 115192 -87863.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 118622 -96013.1 119112 -96503.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 200 130904 -117823 130904 -113486)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 125340 -111499 126615 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 123492 -117923 123492 -114165 124917 -112740)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 126615 -111499 128917 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 124917 -111922 125340 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 126615 -111715 126615 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 130904 -113486 129742 -112323)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 124917 -112740 124917 -111922)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 128917 -111499 129742 -112323)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 127666 -75710.4 127666 -92441.5)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 141369 -75485.3 127891 -75485.3 127666 -75710.4)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 142752 -74103.1 141369 -75485.3)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 102202 -75710.4 127666 -75710.4)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 101976 -75485.3 102202 -75710.4)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 128109 -110221 128109 -92885)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 102040 -47474.8 102040 -46323.1)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101801 -75310.2 101801 -47713.4)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 128109 -92885 127666 -92441.5)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 103192 -46323.1 102040 -46323.1)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101976 -75485.3 101801 -75310.2)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 126615 -111715 128109 -110221)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101801 -47713.4 102040 -47474.8)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 129127 -117470 125742 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 105692 -46323.1 106843 -46323.1)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -113349 125742 -112323)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -113349 126634 -113349)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 107995 -47474.8 113853 -47474.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124340 -117617 124340 -117973)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 106843 -46323.1 107995 -47474.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -117470 125742 -113349)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 129479 -117823 129127 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124340 -117973 123590 -118723 123492 -118723)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -117470 124487 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 113853 -47474.8 114758 -48379.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124487 -117470 124340 -117617)(net /I2C_SCL)(type route)) + (wire (path B.Cu 200 133072 -88991.5 129603 -92460)(net /I2C_SCL)(type route)) + (wire (path B.Cu 200 137323 -88991.5 133072 -88991.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 121162 -56719.9 121162 -54783.3 114758 -48379.8)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 137323 -88991.5 137323 -88059.6)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 140212 -74103.1 136109 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 131431 -73012 134442 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 129603 -110380 129603 -92460)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 134442 -70000.5 121162 -56719.9)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 131431 -82166.9 131431 -73012)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 126634 -113349 129603 -110380)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 136109 -70000.5 134442 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 137323 -88059.6 131431 -82166.9)(net /I2C_SCL)(type route)) + (wire (path F.Cu 1000 186336 -111033 189663 -111033)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 173293 -118323 177293 -122323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 176067 -104039)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 182492 -122323 186044 -118771)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 189663 -111033 191153 -109543 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 171592 -118323 173293 -118323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 179343 -104039 186336 -111033)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 177293 -122323 182492 -122323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 200444 -118771 207472 -111743)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 179343 -104039)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 207472 -111743 205271 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 198904 -102323 200195 -103614)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 178692 -102323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 186044 -118771 200444 -118771)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 205271 -109543 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 200195 -103614 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 198692 -102323 198904 -102323)(net /3V3_MODEM)(type route)) + (wire (path In2.Cu 1000 172812 -76202.9 174192 -74823.1)(net /3V3_MODEM)(type route)) + (wire (path In2.Cu 1000 176067 -104039 176067 -100298 172812 -97043.1 172812 -76202.9)(net /3V3_MODEM)(type route)) + (wire (path B.Cu 200 151196 -76823.1 174192 -76823.1)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 146833 -81185.4 151196 -76823.1)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 146833 -81323.1 146833 -81185.4)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 145732 -81323.1 146833 -81323.1)(net /DOUT_4G)(type route)) + (wire (path F.Cu 1500 104042 -98776.2 104042 -102323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101307 -107323 101042 -107323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99104.8 -87947.5 99104.8 -82832.5)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166798 -79716.7 166798 -79030.3)(net /VEH5V)(type route)) + (wire (path F.Cu 200 124672 -94323.1 123692 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 119032 -95323.1 119792 -95323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 117952 -94803.1 118028 -94803.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 98729.1 -88323.1 99104.8 -87947.5)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -90979.1 101385 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 111642 -97323.1 111642 -97291.4)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 108410 -94059.8 101385 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 98729.1 -88323.1 101385 -90979.1)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 101307 -107874 101307 -107323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -94059.8 101385 -96014.7)(net /VEH5V)(type route)) + (wire (path F.Cu 200 123702 -94313.1 123692 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1001.8 99690.4 -97874.3 99241.6 -98323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166192 -80323.1 166798 -79716.7)(net /VEH5V)(type route)) + (wire (path F.Cu 1001.8 99690.4 -96791 99690.4 -97874.3)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -96014.7 101333 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99690.4 -96791 100414 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101214 -80722.8 102876 -80722.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 102092 -112323 102092 -108857)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 104042 -102323 101307 -105058)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 111642 -97291.4 108410 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 100414 -96067.2 101333 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118070 -94761.2 118470 -94761.2)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166192 -80070.7 166192 -80323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118028 -94803.1 118070 -94761.2)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 102191 -108758 101307 -107874)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118470 -94761.2 119032 -95323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101333 -96067.2 104042 -98776.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99104.8 -82832.5 101214 -80722.8)(net /VEH5V)(type route)) + (wire (path F.Cu 200 124692 -94303.1 124672 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101307 -105058 101307 -107058)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 102092 -108857 102191 -108758)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 101307 -107323 101307 -107058)(net /VEH5V)(type route)) + (wire (path B.Cu 200 117974 -94803.1 117952 -94803.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124452 -94313.1 124102 -93963.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 91341.6 -70003.1 91341.6 -65723.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 112462 -100293 110872 -100293)(net /VEH5V)(type route)) + (wire (path B.Cu 200 106042 -91903.1 87741.6 -73603.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 91341.6 -65723.1 93641.6 -63423.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124692 -94303.1 124662 -94333.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 122782 -95113.1 118284 -95113.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124572 -94313.1 124452 -94313.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 87741.6 -73603.1 91341.6 -70003.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124662 -94333.1 124592 -94333.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 93641.6 -63423.1 93641.6 -42433.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124592 -94333.1 124572 -94313.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 123932 -93963.1 122782 -95113.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 106042 -95463.1 106042 -91903.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124102 -93963.1 123932 -93963.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 123302 -42433.1 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 118284 -95113.1 117974 -94803.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 117952 -94803.1 112462 -100293)(net /VEH5V)(type route)) + (wire (path B.Cu 200 93641.6 -42433.1 123302 -42433.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 110872 -100293 106042 -95463.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103228 -76003.8 103228 -74966.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -78226.4 103217 -77885)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 107967 -46736.5 107967 -46492.7 110091 -44368.6)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -74614.7 102876 -51827.7)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103217 -77885 103217 -76475.2)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 110091 -44368.6 125237 -44368.6)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 162924 -75156.4 162924 -60109.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -51827.7 107967 -46736.5)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103228 -74966.8 102876 -74614.7)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 127192 -46585.8 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 162924 -60109.4 153114 -50298.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 166798 -79030.3 162924 -75156.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103217 -76475.2 102987 -76244.9)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -80722.8 102876 -78226.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 125237 -44368.6 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 130905 -50298.8 127192 -46585.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102987 -76244.9 102987 -76244.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 153114 -50298.8 130905 -50298.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102987 -76244.8 103228 -76003.8)(net /VEH5V)(type route)) + (wire (path F.Cu 200 101070 -116264 101070 -115090)(net /LED_A)(type route)) + (wire (path F.Cu 200 99789.9 -107426 98794.6 -107426 98691.6 -107323)(net /LED_A)(type route)) + (wire (path F.Cu 200 101129 -116323 101070 -116264)(net /LED_A)(type route)) + (wire (path B.Cu 200 99789.9 -107426 177369 -107426)(net /LED_A)(type route)) + (wire (path In2.Cu 200 99789.9 -113809 99789.9 -107426)(net /LED_A)(type route)) + (wire (path In2.Cu 200 196970 -89823.1 194972 -89823.1)(net /LED_A)(type route)) + (wire (path In2.Cu 200 210167 -70825.2 206021 -74970.6 206021 -80771.8)(net /LED_A)(type route)) + (wire (path In2.Cu 200 101070 -115090 99789.9 -113809)(net /LED_A)(type route)) + (wire (path In2.Cu 200 206021 -80771.8 196970 -89823.1)(net /LED_A)(type route)) + (wire (path In2.Cu 200 210167 -70823.1 210167 -70825.2)(net /LED_A)(type route)) + (wire (path In2.Cu 200 194972 -89823.1 177369 -107426)(net /LED_A)(type route)) + (wire (path F.Cu 200 110777 -111539 110092 -112225 110092 -112323)(net USART1_RX)(type route)) + (wire (path B.Cu 200 128569 -82276.2 128569 -92441.5)(net USART1_RX)(type route)) + (wire (path B.Cu 200 129523 -81323.1 130073 -81323.1)(net USART1_RX)(type route)) + (wire (path B.Cu 200 128972 -81323.1 129523 -81323.1)(net USART1_RX)(type route)) + (wire (path B.Cu 200 135467 -75929.3 166040 -75929.3)(net USART1_RX)(type route)) + (wire (path B.Cu 200 130073 -81323.1 135467 -75929.3)(net USART1_RX)(type route)) + (wire (path B.Cu 200 129523 -81323.1 128569 -82276.2)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -48863.1 113652 -65323.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 166040 -75929.3 167919 -75929.3 187982 -55865.6)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128972 -81323.1 128972 -80221.4)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 116192 -46323.1 115964 -46323.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 189284 -55865.6 187982 -55865.6)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128972 -80221.4 128550 -80221.4)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -65323.1 122432 -74103.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 111558 -112320 126866 -112320)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 111192 -48863.1 113652 -48863.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 115964 -46323.1 113652 -48635.5)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128569 -110616 128569 -92441.5)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 126866 -112320 128569 -110616)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128550 -80221.4 122432 -74103.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 110777 -111539 111558 -112320)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -48635.5 113652 -48863.1)(net USART1_RX)(type route)) + (wire (path F.Cu 200 134492 -98820 134492 -99373)(net 3V3)(type route)) + (wire (path F.Cu 200 135318 -113147 132142 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 131903 -111079 125093 -111079)(net 3V3)(type route)) + (wire (path F.Cu 200 124892 -118723 124340 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 130493 -118300 130904 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 130495 -118323 130192 -118626)(net 3V3)(type route)) + (wire (path F.Cu 200 130265 -118072 130493 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 117792 -129583 117792 -128481)(net 3V3)(type route)) + (wire (path F.Cu 200 131316 -118300 132142 -117474)(net 3V3)(type route)) + (wire (path F.Cu 200 117792 -128481 124340 -121933)(net 3V3)(type route)) + (wire (path F.Cu 200 114092 -112323 114869 -113101)(net 3V3)(type route)) + (wire (path F.Cu 200 93541.6 -83323.1 93541.6 -83794.1)(net 3V3)(type route)) + (wire (path F.Cu 200 98191.6 -46323.1 94584.4 -46323.1)(net 3V3)(type route)) + (wire (path F.Cu 200 100042 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path F.Cu 200 128092 -112323 130265 -114496)(net 3V3)(type route)) + (wire (path F.Cu 200 93541.6 -83794.1 94149.1 -84401.6)(net 3V3)(type route)) + (wire (path F.Cu 200 123314 -113101 124092 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 130192 -118626 130192 -119004)(net 3V3)(type route)) + (wire (path F.Cu 200 100075 -102357 100042 -102323)(net 3V3)(type route)) + (wire (path F.Cu 200 130192 -119004 129871 -119325)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -113147 132142 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 97041.6 -107323 100075 -104290 100075 -102357)(net 3V3)(type route)) + (wire (path F.Cu 200 126045 -119325 125443 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 136142 -112323 135318 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -111318 131903 -111079)(net 3V3)(type route)) + (wire (path F.Cu 200 114092 -112323 111742 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118300 130904 -118323)(net 3V3)(type route)) + (wire (path F.Cu 200 124092 -112081 124092 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 129871 -119325 126045 -119325)(net 3V3)(type route)) + (wire (path F.Cu 200 125093 -111079 124092 -112081)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118323 130495 -118323)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -117474 132142 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 114869 -113101 123314 -113101)(net 3V3)(type route)) + (wire (path F.Cu 200 134167 -104323 133430 -103586)(net 3V3)(type route)) + (wire (path F.Cu 200 130265 -114496 130265 -118072)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118300 131316 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 124340 -121933 124340 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 124892 -118723 125443 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -111318 132142 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 134492 -99373 134042 -99823.1)(net 3V3)(type route)) + (wire (path B.Cu 200 135245 -99573 150483 -99573)(net 3V3)(type route)) + (wire (path B.Cu 200 134492 -98820 135245 -99573)(net 3V3)(type route)) + (wire (path B.Cu 200 150483 -99573 153057 -96999.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 156330 -61293.4 155854 -61769.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 154907 -61769.4 152485 -64190.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -97843.5 98628.8 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 156646 -55886.9 156646 -60643.3)(net 3V3)(type route)) + (wire (path In2.Cu 200 134492 -102524 134492 -98820)(net 3V3)(type route)) + (wire (path In2.Cu 200 152485 -71136.8 155452 -74103.1)(net 3V3)(type route)) + (wire (path In2.Cu 200 97092.6 -71742.2 90247.9 -64897.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 152092 -54602.6 155362 -54602.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -76362.2 97092.6 -73418.7)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -84401.6 94149.1 -76362.2)(net 3V3)(type route)) + (wire (path In2.Cu 200 152679 -94522.5 153057 -94899.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 133430 -103586 134492 -102524)(net 3V3)(type route)) + (wire (path In2.Cu 200 153057 -94899.9 153057 -96999.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 90247.9 -64897.5 90247.9 -50659.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 117792 -129583 117792 -120918)(net 3V3)(type route)) + (wire (path In2.Cu 200 155452 -74103.1 152679 -76875.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 132142 -111318 132142 -104874)(net 3V3)(type route)) + (wire (path In2.Cu 200 99196.8 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 117792 -120918 99196.8 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 90247.9 -50659.5 94584.4 -46323.1)(net 3V3)(type route)) + (wire (path In2.Cu 200 98628.8 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 155854 -61769.4 154907 -61769.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 152485 -64190.9 152485 -71136.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 152679 -76875.6 152679 -94522.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -84401.6 94149.1 -97843.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 150372 -56323.1 152092 -54602.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 156330 -60959.4 156330 -61293.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 156646 -60643.3 156330 -60959.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 155362 -54602.6 156646 -55886.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 97092.6 -73418.7 97092.6 -71742.2)(net 3V3)(type route)) + (wire (path In2.Cu 200 132142 -104874 133430 -103586)(net 3V3)(type route)) + (wire (path F.Cu 1000 91070.6 -62038.4 89256.9 -62038.4)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 89041.6 -56733.1 89041.6 -61823.1)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 89256.9 -62038.4 89041.6 -61823.1)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 91451.6 -54323.1 89041.6 -56733.1)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 103321 -83220.8 99159.9 -79059.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124852 -90708.6 124469 -90326)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 123640 -90326 123239 -90726.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124469 -90326 123640 -90326)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124852 -90708.6 124852 -90708.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 118996 -90726.9 118626 -90356.4 110878 -90356.4)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99159.9 -79059.6 99159.9 -77654.4 99084.4 -77578.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 125048 -90512.7 124852 -90708.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 172692 -133636 129569 -90512.7)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 110878 -90356.4 103743 -83220.8 103321 -83220.8)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 123239 -90726.9 118996 -90726.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99084.4 -70052.2 91070.6 -62038.4)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99084.4 -77578.9 99084.4 -70052.2)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 129569 -90512.7 125048 -90512.7)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 172692 -133823 172692 -133636)(net /24V_IN)(type route)) + (wire (path F.Cu 200 173978 -49661.6 173978 -50210.9)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 175842 -47798.1 173978 -49661.6)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 172096 -52093.1 171692 -52093.1)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 173978 -50210.9 172096 -52093.1)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 164692 -60134.8 164501 -60325.1)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 155563 -61161.3 148028 -61161.3)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 164692 -59323.1 164692 -60134.8)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 148028 -61161.3 145817 -63373.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 155563 -61161.3 155949 -61547.7)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 161752 -60325.1 164501 -60325.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 160530 -61547.7 161752 -60325.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 155949 -61547.7 160530 -61547.7)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 171692 -50823.1 172722 -49792.7)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 176267 -45323.1 174692 -45323.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 176566 -45323.1 176267 -45323.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 172722 -49792.7 173372 -49792.7)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 177545 -46302.1 176566 -45323.1)(net /FB_FAN)(type route)) + (wire (path In2.Cu 200 173372 -49792.7 174055 -49792.7 177545 -46302.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 97169.2 -103451 99473.4 -103451)(net FAN_TACH_RAW)(type route)) + (wire (path F.Cu 200 96041.6 -102323 97169.2 -103451)(net FAN_TACH_RAW)(type route)) + (wire (path B.Cu 200 99473.4 -103451 100700 -102224 171920 -102224 175684 -98459.4)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 208460 -66238 208460 -70313)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210643 -55474.8 211485 -56316.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210192 -55474.8 210643 -55474.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 196950 -81823.1 192320 -81823.1)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 208460 -70313 196950 -81823.1)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 192320 -81823.1 175684 -98459.4)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 211485 -56316.8 211485 -63212.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210192 -54323.1 210192 -55474.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 211485 -63212.8 208460 -66238)(net FAN_TACH_RAW)(type route)) + (wire (path F.Cu 200 107200 -78267.1 98866.2 -78267.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98462.2 -78671.1 96632.6 -78671.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101522 97691.6 -102323)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 115667 -69044 111002 -73708.9)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101522 98492.6 -101217)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 100891 -101522 98492.6 -101522)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 101692 -102323 100891 -101522)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 147661 -69044 115667 -69044)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98866.2 -78267.1 98462.2 -78671.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101217 98373.9 -101217)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 111002 -74465 107200 -78267.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 111002 -73708.9 111002 -74465)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 147832 -68873.6 147661 -69044)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 147832 -56323.1 147832 -68873.6)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 96632.6 -99476.2 96632.6 -78671.1)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 98373.9 -101217 96632.6 -99476.2)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 166742 -55441.5 166742 -55441.5)(net BST_FAN)(type route)) + (wire (path F.Cu 200 167642 -45323.1 168395 -46076.2)(net BST_FAN)(type route)) + (wire (path F.Cu 200 166742 -54633.1 166742 -55441.5)(net BST_FAN)(type route)) + (wire (path In2.Cu 200 166742 -47729.2 168395 -46076.2)(net BST_FAN)(type route)) + (wire (path In2.Cu 200 166742 -55441.5 166742 -47729.2)(net BST_FAN)(type route)) + (wire (path B.Cu 200 119892 -74103.1 121428 -72566.8)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 188585 -61644.6 194364 -55865.6)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 121428 -72566.8 170603 -72566.8)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 181526 -61644.6 188585 -61644.6)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 170603 -72566.8 181526 -61644.6)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111062 -54619.6 111062 -65273.1)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111192 -47474.8 110904 -47474.8)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110040 -48338.5 110040 -53597.9)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111192 -46323.1 111192 -47474.8)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110040 -53597.9 111062 -54619.6)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111062 -65273.1 119892 -74103.1)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110904 -47474.8 110040 -48338.5)(net /USART1_TX)(type route)) + (wire (path F.Cu 1000 127332 -83542.7 131319 -83542.7)(net /SW_BAT)(type route)) + (wire (path F.Cu 1500 163792 -104823 163792 -91863.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 250.2 122242 -88633.1 122242 -91873.1 121742 -91873.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 1000 122242 -88633.1 127332 -83542.7)(net /SW_BAT)(type route)) + (wire (path B.Cu 1500 131319 -83542.7 134090 -83542.7 142411 -91863 163792 -91863 + 163792 -91863.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 200 112272 -74103.1 113429 -75260.4)(net /BATLED3)(type route)) + (wire (path F.Cu 200 201429 -48323.1 201260 -48492.5 200007 -48492.5)(net /BATLED3)(type route)) + (wire (path F.Cu 200 113429 -75260.4 166527 -75260.4)(net /BATLED3)(type route)) + (wire (path In2.Cu 200 199741 -48226 193561 -48226 166527 -75260.4)(net /BATLED3)(type route)) + (wire (path In2.Cu 200 200007 -48492.5 199741 -48226)(net /BATLED3)(type route)) + (wire (path F.Cu 200 203192 -44323.1 203079 -44435.6 203079 -48323.1)(net /BLED3)(type route)) + (wire (path F.Cu 200 119792 -93823.1 115026 -93823.1)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 113192 -106044 113192 -107323)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 115026 -93823.1 114647 -94202.2)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 114271 -93827.1 114647 -94202.2)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 113192 -106044 112899 -105752)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 112899 -94126.5 113198 -93827.1)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 112899 -105752 112899 -94126.5)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 113198 -93827.1 114271 -93827.1)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 202153 -51599.1 183645 -51599.1)(net /BATLED4)(type route)) + (wire (path F.Cu 200 116964 -71950.3 157823 -71950.3)(net /BATLED4)(type route)) + (wire (path F.Cu 200 114812 -74103.1 116964 -71950.3)(net /BATLED4)(type route)) + (wire (path F.Cu 200 164176 -65597.5 169831 -65597.5)(net /BATLED4)(type route)) + (wire (path F.Cu 200 205429 -48323.1 202153 -51599.1)(net /BATLED4)(type route)) + (wire (path F.Cu 200 157823 -71950.3 164176 -65597.5)(net /BATLED4)(type route)) + (wire (path In2.Cu 200 183645 -51783.7 183645 -51599.1)(net /BATLED4)(type route)) + (wire (path In2.Cu 200 169831 -65597.5 183645 -51783.7)(net /BATLED4)(type route)) + (wire (path F.Cu 200 207192 -44323.1 207079 -44435.6 207079 -48323.1)(net /BLED4)(type route)) + (wire (path F.Cu 200 94870.4 -105576 94166.9 -104873)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94870.4 -112044 94870.4 -105576)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94166.9 -104873 91816.6 -104873)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94591.6 -112323 94870.4 -112044)(net EXT_LED)(type route)) + (wire (path F.Cu 200 91816.6 -104873 91816.6 -104779 91096.8 -104060)(net EXT_LED)(type route)) + (wire (path B.Cu 200 109241 -68611.8 121043 -56809.5)(net EXT_LED)(type route)) + (wire (path B.Cu 200 138632 -54743 140212 -56323.1)(net EXT_LED)(type route)) + (wire (path B.Cu 200 92929.4 -68611.8 109241 -68611.8)(net EXT_LED)(type route)) + (wire (path B.Cu 200 122309 -54743 138632 -54743)(net EXT_LED)(type route)) + (wire (path B.Cu 200 121043 -56809.5 121043 -56008.8 122309 -54743)(net EXT_LED)(type route)) + (wire (path In2.Cu 200 91096.8 -104060 91096.8 -70444.4 92929.4 -68611.8)(net EXT_LED)(type route)) + (wire (path F.Cu 200 124832 -95923.1 124702 -95793.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141392 -98771.4 141541 -98771.4)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124286 -95323.1 123692 -95323.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141541 -98771.4 141743 -98569.5)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124696 -95787.9 124696 -95733.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124832 -95933.1 124832 -95923.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124696 -95733.1 124286 -95323.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124832 -95923.1 124696 -95787.9)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124702 -95793.1 124702 -95723.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141392 -99823.1 141392 -98771.4)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125079 -95625.9 125365 -95625.9)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137579 -94492.3 141657 -98569.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 129534 -95012.8 131360 -95012.8)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 129414 -94892.5 129534 -95012.8)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 136259 -94492.3 136260 -94491.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137092 -94492.3 137579 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 126344 -94646.7 127757 -94646.7)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 141657 -98569.5 141743 -98569.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 127757 -94646.7 128002 -94892.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 131360 -95012.8 131881 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 128002 -94892.5 129414 -94892.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 136260 -94491.1 137091 -94491.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125365 -95625.9 126344 -94646.7)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124802 -95633.1 125072 -95633.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 131881 -94492.3 136259 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125072 -95633.1 125079 -95625.9)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124752 -95853.1 124752 -95683.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124832 -95933.1 124752 -95853.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124752 -95683.1 124802 -95633.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137091 -94491.1 137092 -94492.3)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 93691.6 -105823 93691.6 -106635)(net /LED_K)(type route)) + (wire (path F.Cu 200 90663.9 -109662 90663.9 -116834)(net /LED_K)(type route)) + (wire (path F.Cu 200 90991.1 -117161 98416.4 -117161)(net /LED_K)(type route)) + (wire (path F.Cu 200 99254.1 -116323 100258 -117327)(net /LED_K)(type route)) + (wire (path F.Cu 200 98416.4 -117161 99254.1 -116323)(net /LED_K)(type route)) + (wire (path F.Cu 200 100258 -117327 106750 -117327 110969 -113108)(net /LED_K)(type route)) + (wire (path F.Cu 200 93691.6 -106635 90663.9 -109662)(net /LED_K)(type route)) + (wire (path F.Cu 200 90663.9 -116834 90991.1 -117161)(net /LED_K)(type route)) + (wire (path B.Cu 200 131851 -110718 134536 -108033)(net /LED_K)(type route)) + (wire (path B.Cu 200 110969 -113108 113360 -110718 131851 -110718)(net /LED_K)(type route)) + (wire (path B.Cu 200 134536 -108033 173947 -108033)(net /LED_K)(type route)) + (wire (path In2.Cu 200 196992 -87823.1 194157 -87823.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 197761 -82663.1 197761 -87054.2)(net /LED_K)(type route)) + (wire (path In2.Cu 200 208862 -69996.4 208862 -71562)(net /LED_K)(type route)) + (wire (path In2.Cu 200 194157 -87823.1 173947 -108033)(net /LED_K)(type route)) + (wire (path In2.Cu 200 208862 -71562 197761 -82663.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 197761 -87054.2 196992 -87823.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 210167 -69474.8 209383 -69474.8 208862 -69996.4)(net /LED_K)(type route)) + (wire (path In2.Cu 200 210167 -68323.1 210167 -69474.8)(net /LED_K)(type route)) + (wire (path F.Cu 200 177367 -69148.1 177367 -64823.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 178367 -70148.1 177367 -69148.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 182254 -62373.1 179817 -62373.1 177367 -64823.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 197429 -48323.1 196925 -48827.7 196018 -48827.7)(net /BATLED2)(type route)) + (wire (path B.Cu 200 181639 -60961.4 181693 -60961.4)(net /BATLED2)(type route)) + (wire (path B.Cu 200 119069 -72951.4 129670 -62351.1 180250 -62351.1 181639 -60961.4)(net /BATLED2)(type route)) + (wire (path B.Cu 200 109732 -74103.1 110883 -72951.4 119069 -72951.4)(net /BATLED2)(type route)) + (wire (path In2.Cu 200 196018 -48827.7 193827 -48827.7 181693 -60961.4)(net /BATLED2)(type route)) + (wire (path F.Cu 200 153093 -64469.4 153317 -64692.6)(net /SW_IN)(type route)) + (wire (path F.Cu 200 149329 -46323.1 152217 -49210.9)(net /SW_IN)(type route)) + (wire (path F.Cu 200 153317 -64692.6 153317 -65273.1)(net /SW_IN)(type route)) + (wire (path F.Cu 200 152217 -49210.9 152217 -51550.5)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 155100 -62171.1 156021 -62171.1)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 157048 -61143.6 157048 -55720.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 155487 -54159.6 154826 -54159.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 156021 -62171.1 157048 -61143.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 157048 -55720.6 155487 -54159.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 153093 -64469.4 153093 -64177.4 155100 -62171.1)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 154826 -54159.6 152217 -51550.5)(net /SW_IN)(type route)) + (wire (path F.Cu 200 124054 -92460.3 123692 -92823.1)(net /PFI)(type route)) + (wire (path F.Cu 200 107471 -82492.5 107654 -82308.9)(net /PFI)(type route)) + (wire (path F.Cu 200 106504 -102323 106504 -97236.3)(net /PFI)(type route)) + (wire (path F.Cu 200 103328 -84222.5 105058 -82492.5)(net /PFI)(type route)) + (wire (path F.Cu 200 105692 -102323 106504 -102323 107542 -102323)(net /PFI)(type route)) + (wire (path F.Cu 200 105058 -82492.5 107471 -82492.5)(net /PFI)(type route)) + (wire (path F.Cu 200 124054 -91327.7 124054 -92460.3)(net /PFI)(type route)) + (wire (path B.Cu 200 115211 -82484.5 124054 -91327.7)(net /PFI)(type route)) + (wire (path B.Cu 200 107830 -82484.5 115211 -82484.5)(net /PFI)(type route)) + (wire (path B.Cu 200 107654 -82308.9 107830 -82484.5)(net /PFI)(type route)) + (wire (path In2.Cu 200 106504 -97236.3 103328 -94060.3 103328 -84222.5)(net /PFI)(type route)) + (wire (path F.Cu 200 160854 -68295.4 164176 -64973.5)(net /BATLED1)(type route)) + (wire (path F.Cu 200 107192 -74103.1 108343 -74103.1 108343 -73815.2)(net /BATLED1)(type route)) + (wire (path F.Cu 200 113863 -68295.4 160854 -68295.4)(net /BATLED1)(type route)) + (wire (path F.Cu 200 193429 -48679.1 193429 -48323.1)(net /BATLED1)(type route)) + (wire (path F.Cu 200 191111 -50997.4 193429 -48679.1)(net /BATLED1)(type route)) + (wire (path F.Cu 200 108343 -73815.2 113863 -68295.4)(net /BATLED1)(type route)) + (wire (path F.Cu 200 189563 -50997.4 191111 -50997.4)(net /BATLED1)(type route)) + (wire (path In2.Cu 200 174326 -66234.5 165437 -66234.5 164176 -64973.5)(net /BATLED1)(type route)) + (wire (path In2.Cu 200 189563 -50997.4 174326 -66234.5)(net /BATLED1)(type route)) + (wire (path F.Cu 200 118852 -94203.1 118982 -94333.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117642 -94203.1 117522 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 116944 -94323.1 116831 -94436.2)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 118982 -94333.1 118992 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 105042 -106776 105481 -106337)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 105042 -107323 105042 -106776)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117642 -94203.1 118852 -94203.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 118992 -94323.1 119792 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117522 -94323.1 116944 -94323.1)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 106242 -75285.2 105070 -74113.3)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 117352 -74103.1 116170 -75285.2 106242 -75285.2)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 105070 -74113.3 98082.6 -74113.3)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 97242.4 -96055.8 97242.4 -74953.5)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 102237 -101051 97242.4 -96055.8)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -100976 113085 -93372.4)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -106337 105481 -101051 105481 -100976)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -101051 102237 -101051)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 113085 -93372.4 115767 -93372.4)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 97242.4 -74953.5 98082.6 -74113.3)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 115767 -93372.4 116831 -94436.2)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 135232 -98013.4 135692 -98013.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 120742 -97933.8 121563 -98755.2 125989 -98755.2)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -99823.1 135692 -98013.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 120742 -96773.1 120742 -97933.8)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -98013.4 135692 -97331.1)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 125989 -98755.2 126665 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -97331.1 140543 -92479.8)(net /CHRG_STAT)(type route)) + (wire (path B.Cu 200 135166 -98079.4 126665 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path B.Cu 200 135232 -98013.4 135166 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path In2.Cu 200 139537 -91474.1 140543 -92479.8)(net /CHRG_STAT)(type route)) + (wire (path In2.Cu 200 132592 -74103.1 139537 -81048.7 139537 -91474.1)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 127560 -97466 127934 -97091.7)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 144411 -96559.7 144411 -99547.6)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 127934 -95675.5 127507 -95248.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 139635 -104323 135817 -104323)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 121729 -98353.4 123583 -98353.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 124470 -97466 127560 -97466)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 127934 -97091.7 127934 -95675.5)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 144411 -99547.6 139635 -104323)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 123583 -98353.4 124470 -97466)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 121242 -96773.1 121242 -97865.7 121729 -98353.4)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 142017 -99171.3 141489 -99171.3)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136926 -94894 136925 -94892.8)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 141489 -99171.3 137212 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 144411 -96559.7 144411 -96777.1)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136425 -94894 132213 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136427 -94892.8 136425 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 144411 -96777.1 142017 -99171.3)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 127673 -95414.5 127507 -95248.4)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 131693 -95414.5 127673 -95414.5)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 132213 -94894 131693 -95414.5)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136925 -94892.8 136427 -94892.8)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 137212 -94894 136926 -94894)(net /CHRG_FAULT)(type route)) + (wire (path In2.Cu 200 141922 -94070.4 144411 -96559.7)(net /CHRG_FAULT)(type route)) + (wire (path In2.Cu 200 135132 -74103.1 141922 -80893.1 141922 -94070.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 177292 -72417.8 139357 -72417.8 137672 -74103.1)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 178367 -68498.1 179164 -69295.8)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 179164 -70545.1 177292 -72417.8)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 179164 -69295.8 179164 -70545.1)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 94629.1 -51096.6 86098.1 -51096.6)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86587.8 -53479.2 86587.8 -59102)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 85151.6 -52043.1 86587.8 -53479.2)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 98254.1 -54721.7 94629.1 -51096.6)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86098.1 -51096.6 85151.6 -52043.1)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 98254.1 -60373.1 98254.1 -54721.7)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86587.8 -59102 84366.6 -61323.1)(net Q10_GATE)(type route)) + (wire (path F.Cu 1000 98856.9 -63725.4 100129 -62453.1)(net 24V)(type route)) + (wire (path F.Cu 1000 164690 -54617.4 164690 -54093.6)(net 24V)(type route)) + (wire (path F.Cu 1000 83264.1 -58490.6 83264.1 -61978.2)(net 24V)(type route)) + (wire (path F.Cu 1000 100129 -62453.1 103953 -66277)(net 24V)(type route)) + (wire (path F.Cu 1000 164690 -54093.6 165151 -53632.3)(net 24V)(type route)) + (wire (path F.Cu 1000 159279 -61953.7 159425 -62100)(net 24V)(type route)) + (wire (path F.Cu 1000 161810 -57497.3 164690 -54617.4)(net 24V)(type route)) + (wire (path F.Cu 1000 159425 -62100 159952 -62626.4)(net 24V)(type route)) + (wire (path F.Cu 1000 155248 -66277 159425 -62100)(net 24V)(type route)) + (wire (path F.Cu 1000 163466 -61759.7 170930 -61759.7)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -52697.7 159942 -57497.3)(net 24V)(type route)) + (wire (path F.Cu 1000 86991.6 -63725.4 98856.9 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 601 166472 -53632.3 166742 -53363.1)(net 24V)(type route)) + (wire (path F.Cu 1000 162600 -62626.4 163466 -61759.7)(net 24V)(type route)) + (wire (path F.Cu 1000 159952 -62626.4 162600 -62626.4)(net 24V)(type route)) + (wire (path F.Cu 601 165151 -53632.3 166472 -53632.3)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -57497.3 159279 -58160.5)(net 24V)(type route)) + (wire (path F.Cu 1000 103953 -66277 155248 -66277)(net 24V)(type route)) + (wire (path F.Cu 1000 161417 -51223.1 159942 -52697.7)(net 24V)(type route)) + (wire (path F.Cu 1000 100129 -62453.1 100129 -61323.1)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -57497.3 161810 -57497.3)(net 24V)(type route)) + (wire (path F.Cu 1000 170930 -61759.7 173367 -59323.1)(net 24V)(type route)) + (wire (path F.Cu 1000 161417 -47048.1 161417 -51223.1)(net 24V)(type route)) + (wire (path F.Cu 1000 86991.6 -63725.4 86991.6 -71823.1)(net 24V)(type route)) + (wire (path F.Cu 1000 83264.1 -61978.2 85011.4 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 1000 161692 -46773.1 161417 -47048.1)(net 24V)(type route)) + (wire (path F.Cu 1000 85151.6 -56603.1 83264.1 -58490.6)(net 24V)(type route)) + (wire (path F.Cu 1000 159279 -58160.5 159279 -61953.7)(net 24V)(type route)) + (wire (path F.Cu 1000 85011.4 -63725.4 86991.6 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 200 112332 -103113 111542 -102323)(net /PROG)(type route)) + (wire (path F.Cu 200 113902 -103113 112332 -103113)(net /PROG)(type route)) + (wire (path F.Cu 200 114626 -93323.1 113519 -94430.4)(net /PROG)(type route)) + (wire (path F.Cu 200 119792 -93323.1 114626 -93323.1)(net /PROG)(type route)) + (wire (path In2.Cu 200 113519 -102730 113902 -103113)(net /PROG)(type route)) + (wire (path In2.Cu 200 113519 -94430.4 113519 -102730)(net /PROG)(type route)) + (wire (path F.Cu 200 134042 -95323.1 134240 -95521.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134042 -95323.1 134042 -92973.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 123692 -93323.1 129932 -93323.1 130447 -92807.7)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134042 -92973.1 135692 -91323.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134240 -95521.1 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 121742 -97490.4 122003 -97751.7)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 121742 -96773.1 121742 -97490.4)(net /VFB_BST)(type route)) + (wire (path B.Cu 200 122281 -97473.7 133966 -97473.7 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path B.Cu 200 122003 -97751.7 122281 -97473.7)(net /VFB_BST)(type route)) + (wire (path In2.Cu 200 134240 -96600.3 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path In2.Cu 200 130447 -92807.7 134240 -96600.3)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 122742 -96773.1 122966 -96548.4)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 140795 -91374.8 136676 -95494.5)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 141392 -91374.8 140795 -91374.8)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 122966 -96548.4 123383 -96548.4)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 141392 -90323.1 141392 -91374.8)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 126842 -95850.2 136320 -95850.2)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 123383 -96548.4 126144 -96548.4 126842 -95850.2)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 136320 -95850.2 136676 -95494.5)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 123692 -95823.1 124722 -96853.6 127321 -96853.6)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 139201 -97466.2 141392 -95275.9 141392 -94823.1)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 138136 -97466.2 139201 -97466.2)(net /F1_SEL)(type route)) + (wire (path B.Cu 200 127321 -96853.6 127625 -96549.9 137219 -96549.9 138136 -97466.2)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 127692 -87323.1 127208 -87323.1)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 122742 -91789.7 122742 -91873.1)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 127208 -87323.1 122742 -91789.7)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 166742 -52093.1 165423 -52093.1 161136 -56380.2)(net FREQ_FAN)(type route)) + (wire (path F.Cu 1000 104033 -71164.6 104345 -71164.6)(net IGN_IN)(type route)) + (wire (path F.Cu 1000 102192 -69323.1 104033 -71164.6)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 142355 -97561.4 146430 -97561.4 182692 -133823)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 132607 -87813.1 142355 -97561.4)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 110405 -87813.1 132607 -87813.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104680 -71499.1 104680 -78475.6)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -71164.6 104680 -71499.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104680 -78475.6 104345 -78810.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -81753 110405 -87813.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -78810.1 104345 -81753)(net IGN_IN)(type route)) + (via "Via[0-3]_600:300_um" 160281 -60946 (net /DIN_4G)(type route)) + (via "Via[0-3]_600:300_um" 163333 -77836.4 (net /DIN_4G)(type route)) + (via "Via[0-3]_600:300_um" 109642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -55773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 101142 -98323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 195147 -110668 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 177917 -45323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 160694 -59682.2 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 187990 -62946.4 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -55773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 154882 -63306.3 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 100017 -94323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 98158.1 -78069.3 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 97851.6 -82803.1 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 100361 -84328.2 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 120490 -67486.2 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 166684 -63823.1 (net SW_FAN)(type route)) + (via "Via[0-3]_600:300_um" 170313 -55362.6 (net SW_FAN)(type route)) + (via "Via[0-3]_600:300_um" 179603 -49835.2 (net /5V_FAN)(type route)) + (via "Via[0-3]_600:300_um" 190531 -50051.9 (net /5V_FAN)(type route)) + (via "Via[0-3]_600:300_um" 108674 -96377.2 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 154715 -93359.8 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 102590 -100216 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 173407 -53346.3 (net /EN_FAN)(type route)) + (via "Via[0-3]_600:300_um" 174361 -60216.8 (net /EN_FAN)(type route)) + (via "Via[0-3]_800:400_um" 119382 -89423.1 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_800:400_um" 126822 -89223.1 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 93354.2 -109585 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 116832 -109478 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 125532 -94123.1 (net /NTC)(type route)) + (via "Via[0-3]_600:300_um" 115743 -105396 (net /NTC)(type route)) + (via "Via[0-3]_600:300_um" 124193 -57474.8 (net /NRST)(type route)) + (via "Via[0-3]_600:300_um" 188692 -107616 (net /SW3_NODE)(type route)) + (via "Via[0-3]_600:300_um" 187097 -116027 (net /SW3_NODE)(type route)) + (via "Via[0-3]_600:300_um" 171760 -97690.9 (net /SW_5V)(type route)) + (via "Via[0-3]_800:400_um" 202152 -113193 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 171617 -113477 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 156118 -63406.1 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 188670 -102323 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 196891 -110544 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 181474 -109498 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 187142 -107718 (net /BST3)(type route)) + (via "Via[0-3]_600:300_um" 192976 -114752 (net /BST3)(type route)) + (via "Via[0-3]_600:300_um" 92198.6 -67700.9 (net /BAT_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 92096.6 -109080 (net /BAT_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 161642 -61571.2 (net /PWR_CTRL)(type route)) + (via "Via[0-3]_600:300_um" 94238.2 -70412.6 (net /5V_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 106832 -111583 (net /5V_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 164399 -108749 (net /NTC_TEMP)(type route)) + (via "Via[0-3]_600:300_um" 169737 -114087 (net /NTC_TEMP)(type route)) + (via "Via[0-3]_600:300_um" 185252 -114635 (net /COMP3_C)(type route)) + (via "Via[0-3]_600:300_um" 185103 -116791 (net /COMP3_C)(type route)) + (via "Via[0-3]_600:300_um" 125649 -91964.4 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 118024 -91808.1 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 101516 -77180.1 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 96481.1 -72166.6 (net FAN_PWM)(type route)) + (via "Via[0-3]_600:300_um" 93366.6 -93338.1 (net FAN_PWM)(type route)) + (via "Via[0-3]_600:300_um" 99480.8 -93353.8 (net FAN_GATE)(type route)) + (via "Via[0-3]_600:300_um" 102921 -95462.2 (net FAN_GATE)(type route)) + (via "Via[0-3]_600:300_um" 125152 -94993.1 (net /IGATE)(type route)) + (via "Via[0-3]_600:300_um" 113057 -91373.7 (net /IGATE)(type route)) + (via "Via[0-3]_600:300_um" 126615 -111715 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 101976 -75485.3 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 127666 -92441.5 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 126634 -113349 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 114758 -48379.8 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 129603 -92460 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 137323 -88991.5 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 176067 -104039 (net /3V3_MODEM)(type route)) + (via "Via[0-3]_600:300_um" 117952 -94803.1 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 124692 -94303.1 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 166798 -79030.3 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 102876 -80722.8 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 177369 -107426 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 101070 -115090 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 99789.9 -107426 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 166040 -75929.3 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 128569 -92441.5 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 110777 -111539 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 134492 -98820 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 94149.1 -84401.6 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 99126.1 -102323 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 133430 -103586 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 153057 -96999.8 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 132142 -111318 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 94584.4 -46323.1 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 91070.6 -62038.4 (net /24V_IN)(type route)) + (via "Via[0-3]_600:300_um" 164501 -60325.1 (net /BASE_LS)(type route)) + (via "Via[0-3]_600:300_um" 155563 -61161.3 (net /BASE_LS)(type route)) + (via "Via[0-3]_600:300_um" 177545 -46302.1 (net /FB_FAN)(type route)) + (via "Via[0-3]_600:300_um" 173372 -49792.7 (net /FB_FAN)(type route)) + (via "Via[0-3]_600:300_um" 99473.4 -103451 (net FAN_TACH_RAW)(type route)) + (via "Via[0-3]_600:300_um" 175684 -98459.4 (net FAN_TACH_RAW)(type route)) + (via "Via[0-3]_600:300_um" 147661 -69044 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 96632.6 -78671.1 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 98373.9 -101217 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 168395 -46076.2 (net BST_FAN)(type route)) + (via "Via[0-3]_600:300_um" 166742 -55441.5 (net BST_FAN)(type route)) + (via "Via[0-3]_600:300_um" 163792 -91863.1 (net /SW_BAT)(type route)) + (via "Via[0-3]_600:300_um" 131319 -83542.7 (net /SW_BAT)(type route)) + (via "Via[0-3]_600:300_um" 166527 -75260.4 (net /BATLED3)(type route)) + (via "Via[0-3]_600:300_um" 200007 -48492.5 (net /BATLED3)(type route)) + (via "Via[0-3]_600:300_um" 114647 -94202.2 (net /CLPROG_TP)(type route)) + (via "Via[0-3]_600:300_um" 113192 -106044 (net /CLPROG_TP)(type route)) + (via "Via[0-3]_600:300_um" 169831 -65597.5 (net /BATLED4)(type route)) + (via "Via[0-3]_600:300_um" 183645 -51599.1 (net /BATLED4)(type route)) + (via "Via[0-3]_600:300_um" 92929.4 -68611.8 (net EXT_LED)(type route)) + (via "Via[0-3]_600:300_um" 91096.8 -104060 (net EXT_LED)(type route)) + (via "Via[0-3]_600:300_um" 141743 -98569.5 (net /F0_SEL)(type route)) + (via "Via[0-3]_600:300_um" 124832 -95933.1 (net /F0_SEL)(type route)) + (via "Via[0-3]_600:300_um" 173947 -108033 (net /LED_K)(type route)) + (via "Via[0-3]_600:300_um" 110969 -113108 (net /LED_K)(type route)) + (via "Via[0-3]_600:300_um" 196018 -48827.7 (net /BATLED2)(type route)) + (via "Via[0-3]_600:300_um" 181693 -60961.4 (net /BATLED2)(type route)) + (via "Via[0-3]_600:300_um" 153093 -64469.4 (net /SW_IN)(type route)) + (via "Via[0-3]_600:300_um" 152217 -51550.5 (net /SW_IN)(type route)) + (via "Via[0-3]_600:300_um" 124054 -91327.7 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 103328 -84222.5 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 106504 -97236.3 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 107654 -82308.9 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 189563 -50997.4 (net /BATLED1)(type route)) + (via "Via[0-3]_600:300_um" 164176 -64973.5 (net /BATLED1)(type route)) + (via "Via[0-3]_600:300_um" 98082.6 -74113.3 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 116831 -94436.2 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 105481 -106337 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 135232 -98013.4 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 126665 -98079.4 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 140543 -92479.8 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 144411 -96559.7 (net /CHRG_FAULT)(type route)) + (via "Via[0-3]_600:300_um" 127507 -95248.4 (net /CHRG_FAULT)(type route)) + (via "Via[0-3]_600:300_um" 113902 -103113 (net /PROG)(type route)) + (via "Via[0-3]_600:300_um" 113519 -94430.4 (net /PROG)(type route)) + (via "Via[0-3]_600:300_um" 134240 -97200.4 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 130447 -92807.7 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 122003 -97751.7 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 123383 -96548.4 (net /F2_SEL)(type route)) + (via "Via[0-3]_600:300_um" 136676 -95494.5 (net /F2_SEL)(type route)) + (via "Via[0-3]_600:300_um" 138136 -97466.2 (net /F1_SEL)(type route)) + (via "Via[0-3]_600:300_um" 127321 -96853.6 (net /F1_SEL)(type route)) + (via "Via[0-3]_600:300_um" 104345 -71164.6 (net IGN_IN)(type route)) + ) +) diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn.bak b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn.bak new file mode 100644 index 0000000..c3c5740 --- /dev/null +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn.bak @@ -0,0 +1,3533 @@ +(pcb "/Users/leo/Documents/Claude/Projects/Drogheda/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.dsn" + (parser + (string_quote ") + (space_in_quoted_tokens on) + (host_cad "KiCad's Pcbnew") + (host_version "10.0.4") + ) + (resolution um 10) + (unit um) + (structure + (layer F.Cu + (type signal) + (property + (index 0) + ) + ) + (layer In1.Cu + (type signal) + (property + (index 1) + ) + ) + (layer In2.Cu + (type signal) + (property + (index 2) + ) + ) + (layer B.Cu + (type signal) + (property + (index 3) + ) + ) + (boundary + (path pcb 0 215192 -140323 80191.6 -140323 80191.6 -40323.1 215192 -40323.1 + 215192 -140323) + ) + (plane GND (polygon F.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (plane GND (polygon B.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (plane GND (polygon In1.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (via "Via[0-3]_600:300_um" "Via[0-3]_800:400_um") + (rule + (width 200) + (clearance 200) + (clearance 50 (type smd_smd)) + ) + ) + (placement + (component Resistor_SMD:R_0603_1608Metric + (place R2 167366.65 -59323.1 front 0 (PN 10k)) + (place Ren2 178191.65 -59323.1 front 0 (PN 20k)) + (place R5 92241.65 -112323.1 front 0 (PN 10k)) + (place Rg 94191.65 -94323.1 front 0 (PN 100R)) + (place R31 128916.65 -112323.1 front 0 (PN 4.7k)) + (place Rfreq2 179516.65 -111823.1 front 0 (PN 100k)) + (place Rmled 203150 -87950 front 0 (PN 1k)) + (place R3 97866.65 -107323.1 front 0 (PN 1k)) + (place R60 179516.65 -102323.1 front 0 (PN "100k/1%")) + (place Rdfu 110916.65 -112323.1 front 0 (PN 22k)) + (place R20 173866.65 -45323.1 front 0 (PN 100k)) + (place Rts 96866.65 -102323.1 front 0 (PN 1k)) + (place RB3 202254.15 -48323.1 front 0 (PN 330R)) + (place RB4 206254.15 -48323.1 front 0 (PN 330R)) + (place R61 179516.65 -107323.1 front 0 (PN "31.6k/1%")) + (place R1 163866.65 -59323.1 front 0 (PN 1k)) + (place R55 101866.65 -107323.1 front 0 (PN "10k/1%")) + (place Rled 95416.65 -112323.1 front 0 (PN 10k)) + (place Rgs 99191.65 -94323.1 front 0 (PN 100k)) + (place R41 178191.65 -64823.1 front 0 (PN 10k)) + (place RB2 198254.15 -48323.1 front 0 (PN 330R)) + (place Rtp 100866.65 -102323.1 front 0 (PN 10k)) + (place R30 124916.65 -112323.1 front 0 (PN 4.7k)) + (place R6 98741.65 -112323.1 front 0 (PN 10k)) + (place R52 108366.65 -102323.1 front 0 (PN "100k/1%")) + (place R56 105866.65 -107323.1 front 0 (PN 100k)) + (place R42 114916.65 -112323.1 front 0 (PN "10k/1%")) + (place R53 134866.65 -91323.1 front 0 (PN "499k/1%")) + (place R51 104866.65 -102323.1 front 0 (PN "287k/1%")) + (place Rcomp2 179691.65 -116323.1 front 0 (PN 40.2k)) + (place R58 134991.65 -104323.1 front 0 (PN 100k)) + (place Rrp 85191.65 -61323.1 front 0 (PN 10k)) + (place R21 177091.65 -45323.1 front 0 (PN 19.1k)) + (place R7 102916.65 -112323.1 front 0 (PN 10k)) + (place RB1 194254.15 -48323.1 front 0 (PN 330R)) + (place Ren1 174191.65 -59323.1 front 0 (PN 100k)) + (place R8 106916.65 -112323.1 front 0 (PN 10k)) + (place R54 134866.65 -95323.1 front 0 (PN "100k/1%")) + (place R57 134866.65 -99823.1 front 0 (PN 100k)) + (place R50 112366.65 -102323.1 front 0 (PN "825R/1%")) + ) + (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (place P13 116191.65 -46323.1 front 0 (PN "MODO-B-UPLINK (DNP — harness alt)")) + ) + (component Resistor_SMD:R_0603_1608Metric::1 + (place Rigb 101366.65 -74323.1 front 180 (PN 10k)) + (place Rig 101366.65 -69323.1 front 180 (PN 100R)) + ) + (component Diode_SMD:D_SMA + (place Dbk 168191.65 -65823.1 front -90 (PN SS34)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (place P6 210191.65 -61823.1 front 90 (PN FAN)) + ) + (component LED_SMD:LED_0805_2012Metric + (place DB2 198254.15 -44323.1 front 0 (PN LED)) + (place DB1 194254.15 -44323.1 front 0 (PN LED)) + (place DB3 202254.15 -44323.1 front 0 (PN LED)) + (place DB4 206254.15 -44323.1 front 0 (PN LED)) + (place D1 100191.65 -116323.1 front 0 (PN LED)) + (place D4G 203100 -92100 front 0 (PN LED)) + ) + (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical::1" + (place P4 210191.65 -108323.1 front 90 (PN "BATT-1S4P+NTC")) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (place P10 210166.65 -80073.1 front 90 (PN "RESET-EXT")) + (place P8 210166.65 -70823.1 front 90 (PN PANEL_LED)) + ) + (component Capacitor_SMD:C_0603_1608Metric + (place Ccomp 175841.65 -53473.1 front -90 (PN 2.2nF)) + ) + (component "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (place U7 197621.65 -112573.1 front 180 (PN MP1584EN)) + (place U2 169216.65 -52728.1 front 180 (PN MP1584EN)) + ) + (component Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical + (place J1 107191.65 -56323.1 front 90 (PN "Blackpill-L")) + (place J2 107191.65 -74103.1 front 90 (PN "Blackpill-R")) + ) + (component Capacitor_SMD:C_0603_1608Metric::1 + (place Ccomp2 187966.65 -114823.1 front 0 (PN 2.2nF)) + (place Cu3 132916.65 -112323.1 front 0 (PN 100nF)) + (place C7 96191.65 -116323.1 front 0 (PN 100nF)) + (place Cbst2 187916.65 -109823.1 front 0 (PN 10nF)) + (place Cbst 168416.65 -45323.1 front 0 (PN 10nF)) + (place C9 101591.65 -83323.1 front 0 (PN 100nF)) + (place C11 162191.65 -51223.1 front 0 (PN 100nF)) + (place C31 112416.65 -97323.1 front 0 (PN 2.2uF)) + (place C5 92191.65 -116323.1 front 0 (PN 100nF)) + (place C24 118916.65 -112323.1 front 0 (PN 100nF)) + (place Cu4 136916.65 -112323.1 front 0 (PN 100nF)) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::1" + (place P11 135791.65 -46323.1 front 0 (PN "CUTOFF-SW")) + (place P2 127191.65 -46323.1 front 0 (PN "5V-IN-SD15B05")) + ) + (component "Package_TO_SOT_SMD:SOT-23" + (place Q1 154254.15 -64323.1 front 0 (PN AO3401A)) + (place Q5 146754.15 -64323.1 front 0 (PN MMBT3904)) + (place Q2 106191.65 -96323.1 front 0 (PN AO3400A)) + (place Q4 92754.15 -105823.1 front 0 (PN AO3400A)) + (place DzG 99191.65 -61323.1 front 0 (PN BZX84C15)) + (place Q6 183191.65 -63323.1 front 0 (PN MMBT3904)) + ) + (component "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (place Q7 112716.65 -87228.1 front 0 (PN AO4406A)) + ) + (component Capacitor_SMD:C_0805_2012Metric + (place C34 130991.65 -104323.1 front 0 (PN 10uF)) + (place C35 130191.65 -96323.1 front 0 (PN 22uF)) + (place C30 100191.65 -98323.1 front 0 (PN 10uF)) + (place C23 179741.65 -51223.1 front 0 (PN 22uF/16V)) + ) + (component "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (place U3 124191.65 -118323.1 front 0 (PN "SHT40-AD1B")) + ) + (component Capacitor_SMD:C_0805_2012Metric::1 + (place C40 179691.65 -96323.1 front -90 (PN 22uF)) + (place C41 198691.65 -103273.1 front -90 (PN 22uF)) + ) + (component Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical + (place J7 174191.65 -74823.1 front 0 (PN "XBEE-ROW-1 (VCC/DOUT/DIN)")) + (place J8 196541.65 -74823.1 front 0 (PN "XBEE-ROW-2")) + ) + (component Diode_SMD:D_SMA::1 + (place D2 94191.65 -98323.1 front 0 (PN SS34)) + (place Dbk2 188491.65 -103823.1 front 0 (PN SS34)) + ) + (component Resistor_SMD:R_1206_3216Metric + (place RS1 100191.65 -88323.1 front 0 (PN "8mR/1%")) + ) + (component MountingHole:MountingHole_3.2mm + (place MH3 85191.65 -135323.1 front 0 (PN MountingHole_3.2mm)) + (place MH4 211191.65 -135323.1 front 0 (PN MountingHole_3.2mm)) + (place MH2 211191.65 -45323.1 front 0 (PN MountingHole_3.2mm)) + (place MH1 85191.65 -45323.1 front 0 (PN MountingHole_3.2mm)) + ) + (component Diode_SMD:D_SMB + (place D10 91191.65 -61823.1 front 0 (PN SMBJ33A)) + ) + (component Resistor_SMD:R_0603_1608Metric::2 + (place Rcomp 175841.65 -48623.1 front -90 (PN 40.2k)) + (place R40 178366.65 -69323.1 front -90 (PN 1k)) + ) + (component Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical + (place H3 111191.65 -46323.1 front 0 (PN "USART1-RSV (DNP)")) + ) + (component "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (place L6 167691.65 -104823.1 front 0 (PN 2.2uH/8A)) + (place L2 187291.65 -47823.1 front 0 (PN 10uH)) + (place L7 167691.65 -118323.1 front 0 (PN 10uH/2A)) + ) + (component "Package_TO_SOT_SMD:SOT-563" + (place U4 130191.65 -118323.1 front 0 (PN TMP102)) + ) + (component TestPoint:TestPoint_Pad_D1.5mm + (place TP1 113191.65 -107323.1 front 0 (PN CLPROG)) + (place TP2 127691.65 -87323.1 front 0 (PN PFO)) + ) + (component Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (place SW4G 148175 -135600 front 0 (PN RESET)) + ) + (component Capacitor_SMD:C_1210_3225Metric + (place C22 161691.65 -45298.1 front 90 (PN 22uF/50V)) + ) + (component Resistor_SMD:R_0603_1608Metric::3 + (place Rcc1 161425 -124750 front 90 (PN 5.1k)) + (place Rcc2 165400 -124750 front 90 (PN 5.1k)) + (place Rfreq 161135.95 -55555.2 front 90 (PN 100k)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" + (place P5 98191.65 -46323.1 front 0 (PN TEMP_PROBE)) + ) + (component "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (place JP4 141391.65 -99823.1 front 0 (PN F0:1)) + (place JP3 141391.65 -94823.1 front 0 (PN F1:0)) + (place JP2 141391.65 -90323.1 front 0 (PN "F2:Li-ion")) + ) + (component "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" + (place JP1 165541.65 -80323.1 front 0 (PN 0R)) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::2" + (place P12 210191.65 -121323.1 front 90 (PN "NTC-HOTSPOT")) + ) + (component Capacitor_SMD:C_1210_3225Metric::1 + (place C32 120666.65 -104323.1 front 0 (PN 47uF)) + (place C33 126166.65 -104323.1 front 0 (PN 47uF)) + ) + (component Connector_USB:USB_C_Receptacle_GCT_USB4085 + (place J9 161175 -129425 front 0 (PN "USB-C")) + ) + (component "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" + (place P1 172691.65 -133823.1 front 0 (PN "GX16-5")) + ) + (component Fuse:Fuse_1812_4532Metric + (place F1 147191.65 -46323.1 front 0 (PN "PPTC 3A")) + ) + (component "Relay_THT:Relay_SPDT_Omron_G5V-1" + (place K1 189284.15 -55865.6 front 0 (PN "G5V-1 DC5")) + ) + (component Capacitor_SMD:CP_Elec_6.3x7.7 + (place C43 185191.65 -122323.1 front 0 (PN 100uF/6.3V)) + (place C10 89691.65 -71823.1 front 0 (PN 47uF/50V)) + ) + (component "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (place U6 121741.65 -94323.1 front 0 (PN LTC4040EUFD)) + ) + (component "Package_TO_SOT_SMD:TO-252-2" + (place Q10 90191.65 -54323.1 front 0 (PN IRFR5305)) + ) + (component Button_Switch_THT:SW_PUSH_6mm + (place SW1 199191.65 -133323.1 front 0 (PN RESET)) + ) + (component Capacitor_SMD:CP_Elec_6.3x7.7::1 + (place C3 154691.65 -48523.1 front 90 (PN 47uF)) + ) + (component "Diode_SMD:D_SOD-123" + (place D5 95191.65 -83323.1 front 0 (PN BAT54)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (place P3 210191.65 -95323.1 front 90 (PN "RTK2B-UART1 (DNP — harness alt)")) + ) + (component "Diode_SMD:D_SOD-123::1" + (place D6 199691.65 -61823.1 front 180 (PN 1N4148W)) + ) + (component Module:Arduino_UNO_R3 + (place MOD1 115251.65 -129583.1 back 180 (PN "simpleRTK2B-Pro on UNO female headers")) + ) + ) + (library + (image Resistor_SMD:R_0603_1608Metric + (outline (polygon signal 0 1475 -725 -1475 -725 -1475 725 1475 725)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 100 -800 412.5 800 412.5 800 -412.5 -800 -412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (outline (polygon signal 0 7945 -3895 -2945 -3895 -2945 2845 7945 2845)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -1800 -2750 2500 -2750)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 6800 200 6800 -2750)) + (outline (path signal 120 6800 -2750 2500 -2750)) + (outline (path signal 120 7550 200 6800 200)) + (outline (path signal 120 -2560 2460 7560 2460 7560 -3510 -2560 -3510 -2560 2460)) + (outline (path signal 120 -2550 2450 -750 2450 -750 1700 -2550 1700 -2550 2450)) + (outline (path signal 120 750 2450 4250 2450 4250 1700 750 1700 750 2450)) + (outline (path signal 120 5750 2450 7550 2450 7550 1700 5750 1700 5750 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 7450 2350 7450 -3400 -2450 -3400 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + ) + (image Resistor_SMD:R_0603_1608Metric::1 + (outline (polygon signal 0 -1475 725 1475 725 1475 -725 -1475 -725)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 100 -800 412.5 800 412.5 800 -412.5 -800 -412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image Diode_SMD:D_SMA + (outline (polygon signal 0 3495 1745 3495 -1745 -3495 -1745 -3495 1745)) + (outline (path signal 120 -3510 -1650 2000 -1650)) + (outline (path signal 120 -3510 1650 -3510 -1650)) + (outline (path signal 120 -3510 1650 2000 1650)) + (outline (path signal 100 -2300 -1500 -2300 1500)) + (outline (path signal 100 2300 -1500 -2300 -1500)) + (outline (path signal 100 501.18 -750.32 501.18 799.08)) + (outline (path signal 100 -649.44 -1.02 501.18 -750.32)) + (outline (path signal 100 -649.44 -1.02 -1551.14 -1.02)) + (outline (path signal 100 -649.44 -1.02 501.18 799.08)) + (outline (path signal 100 501.18 -1.02 1499.4 -1.02)) + (outline (path signal 100 -649.44 799.08 -649.44 -801.12)) + (outline (path signal 100 2300 1500 2300 -1500)) + (outline (path signal 100 2300 1500 -2300 1500)) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 1 -2000 0) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 2 2000 0) + ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (outline (polygon signal 0 -2945 -3895 -2945 2845 10445 2845 10445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 10060 -3510 10060 2460 -2560 2460)) + (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 9950 -3400 9950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 (rotate 180) 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 4 7500 0) + ) + (image LED_SMD:LED_0805_2012Metric + (outline (polygon signal 0 1675 -945 -1675 -945 -1675 945 1675 945)) + (outline (path signal 120 -1685 960 -1685 -960)) + (outline (path signal 120 -1685 -960 1000 -960)) + (outline (path signal 120 1000 960 -1685 960)) + (outline (path signal 100 -1000 300 -1000 -600)) + (outline (path signal 100 -1000 -600 1000 -600)) + (outline (path signal 100 -700 600 -1000 300)) + (outline (path signal 100 1000 600 -700 600)) + (outline (path signal 100 1000 -600 1000 600)) + (pin RoundRect[T]Pad_975.000000x1400.000000_244.678000_um_0.000000_0 1 -937.5 0) + (pin RoundRect[T]Pad_975.000000x1400.000000_244.678000_um_0.000000_0 2 937.5 0) + ) + (image "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical::1" + (outline (polygon signal 0 -2945 -3895 -2945 2845 7945 2845 7945 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 7550 200 6800 200)) + (outline (path signal 120 6800 200 6800 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 6800 -2750 2500 -2750)) + (outline (path signal 120 -1800 -2750 2500 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 7560 -3510 7560 2460 -2560 2460)) + (outline (path signal 120 5750 2450 5750 1700 7550 1700 7550 2450 5750 2450)) + (outline (path signal 120 750 2450 750 1700 4250 1700 4250 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 7450 -3400 7450 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + ) + (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (outline (polygon signal 0 -2945 -3895 -2945 2845 5445 2845 5445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 5060 -3510 5060 2460 -2560 2460)) + (outline (path signal 120 3250 2450 3250 1700 5050 1700 5050 2450 3250 2450)) + (outline (path signal 120 750 2450 750 1700 1750 1700 1750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 4950 -3400 4950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 (rotate 180) 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um (rotate 180) 2 2500 0) + ) + (image Capacitor_SMD:C_0603_1608Metric + (outline (polygon signal 0 1475 725 1475 -725 -1475 -725 -1475 725)) + (outline (path signal 120 -140.58 -510 140.58 -510)) + (outline (path signal 120 -140.58 510 140.58 510)) + (outline (path signal 100 -800 400 -800 -400 800 -400 800 400 -800 400)) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 1 -775 0) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 2 775 0) + ) + (image "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (outline (polygon signal 0 -2195 -2455 -3695 -2455 -3695 2455 -2195 2455 -2195 2695 + 2195 2695 2195 2455 3695 2455 3695 -2455 2195 -2455 2195 -2695 + -2195 -2695)) + (outline (path signal 120 2060 -2560 -2060 -2560)) + (outline (path signal 120 2060 -2465 2060 -2560)) + (outline (path signal 120 2060 2560 2060 2465)) + (outline (path signal 120 -2060 -2560 -2060 -2465)) + (outline (path signal 120 -2060 2465 -2060 2560)) + (outline (path signal 120 -2060 2560 2060 2560)) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 1 -2475 1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 2 -2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 3 -2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 4 -2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 5 2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 6 2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 7 2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 8 2475 1905) + (pin Rect[T]Pad_2290.000000x3000.000000_um 9 0 0) + ) + (image Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical + (outline (polygon signal 0 -1765 -50025 -1765 1765 1765 1765 1765 -50025)) + (outline (path signal 120 1330 1330 1330 0)) + (outline (path signal 120 0 1330 1330 1330)) + (outline (path signal 120 1330 -1270 1330 -49590)) + (outline (path signal 120 -1330 -1270 1330 -1270)) + (outline (path signal 120 -1330 -1270 -1330 -49590)) + (outline (path signal 120 -1330 -49590 1330 -49590)) + (outline (path signal 100 635 1270 1270 635)) + (outline (path signal 100 -1270 1270 635 1270)) + (outline (path signal 100 1270 635 1270 -49530)) + (outline (path signal 100 1270 -49530 -1270 -49530)) + (outline (path signal 100 -1270 -49530 -1270 1270)) + (pin Rect[A]Pad_1700.000000x1700.000000_um 1 0 0) + (pin Round[A]Pad_1700.000000_um 2 0 -2540) + (pin Round[A]Pad_1700.000000_um 3 0 -5080) + (pin Round[A]Pad_1700.000000_um 4 0 -7620) + (pin Round[A]Pad_1700.000000_um 5 0 -10160) + (pin Round[A]Pad_1700.000000_um 6 0 -12700) + (pin Round[A]Pad_1700.000000_um 7 0 -15240) + (pin Round[A]Pad_1700.000000_um 8 0 -17780) + (pin Round[A]Pad_1700.000000_um 9 0 -20320) + (pin Round[A]Pad_1700.000000_um 10 0 -22860) + (pin Round[A]Pad_1700.000000_um 11 0 -25400) + (pin Round[A]Pad_1700.000000_um 12 0 -27940) + (pin Round[A]Pad_1700.000000_um 13 0 -30480) + (pin Round[A]Pad_1700.000000_um 14 0 -33020) + (pin Round[A]Pad_1700.000000_um 15 0 -35560) + (pin Round[A]Pad_1700.000000_um 16 0 -38100) + (pin Round[A]Pad_1700.000000_um 17 0 -40640) + (pin Round[A]Pad_1700.000000_um 18 0 -43180) + (pin Round[A]Pad_1700.000000_um 19 0 -45720) + (pin Round[A]Pad_1700.000000_um 20 0 -48260) + ) + (image Capacitor_SMD:C_0603_1608Metric::1 + (outline (polygon signal 0 1475 -725 -1475 -725 -1475 725 1475 725)) + (outline (path signal 120 -140.58 510 140.58 510)) + (outline (path signal 120 -140.58 -510 140.58 -510)) + (outline (path signal 100 -800 400 800 400 800 -400 -800 -400 -800 400)) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 1 -775 0) + (pin RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 2 775 0) + ) + (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::1" + (outline (polygon signal 0 5445 -3895 -2945 -3895 -2945 2845 5445 2845)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 -2560 2460 5060 2460 5060 -3510 -2560 -3510 -2560 2460)) + (outline (path signal 120 -2550 2450 -750 2450 -750 1700 -2550 1700 -2550 2450)) + (outline (path signal 120 750 2450 1750 2450 1750 1700 750 1700 750 2450)) + (outline (path signal 120 3250 2450 5050 2450 5050 1700 3250 1700 3250 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 4950 2350 4950 -3400 -2450 -3400 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um 2 2500 0) + ) + (image "Package_TO_SOT_SMD:SOT-23" + (outline (polygon signal 0 895 545 1925 545 1925 -545 895 -545 895 -1695 -895 -1695 + -895 -1495 -1925 -1495 -1925 -395 -895 -395 -895 395 -1925 395 + -1925 1495 -895 1495 -895 1695 895 1695)) + (outline (path signal 120 -760 1560 760 1560)) + (outline (path signal 120 -760 1510 -760 1560)) + (outline (path signal 120 -760 -390 -760 390)) + (outline (path signal 120 -760 -1560 -760 -1510)) + (outline (path signal 120 760 1560 760 560)) + (outline (path signal 120 760 -560 760 -1560)) + (outline (path signal 120 760 -1560 -760 -1560)) + (pin RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 1 -937.5 950) + (pin RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 2 -937.5 -950) + (pin RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 3 937.5 0) + ) + (image "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (outline (polygon signal 0 2195 2455 3695 2455 3695 -2455 2195 -2455 2195 -2695 + -2195 -2695 -2195 -2455 -3695 -2455 -3695 2455 -2195 2455 + -2195 2695 2195 2695)) + (outline (path signal 120 -2060 2560 2060 2560)) + (outline (path signal 120 -2060 2465 -2060 2560)) + (outline (path signal 120 -2060 -2560 -2060 -2465)) + (outline (path signal 120 2060 2560 2060 2465)) + (outline (path signal 120 2060 -2465 2060 -2560)) + (outline (path signal 120 2060 -2560 -2060 -2560)) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 1 -2475 1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 2 -2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 3 -2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 4 -2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 5 2475 -1905) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 6 2475 -635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 7 2475 635) + (pin RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 8 2475 1905) + ) + (image Capacitor_SMD:C_0805_2012Metric + (outline (polygon signal 0 1695 -975 -1695 -975 -1695 975 1695 975)) + (outline (path signal 120 -261.252 735 261.252 735)) + (outline (path signal 120 -261.252 -735 261.252 -735)) + (outline (path signal 100 -1000 625 1000 625 1000 -625 -1000 -625 -1000 625)) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 1 -950 0) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 2 950 0) + ) + (image "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (outline (polygon signal 0 1195 -995 -1195 -995 -1195 995 1195 995)) + (outline (path signal 120 -750 860 750 860)) + (outline (path signal 120 -750 -860 750 -860)) + (outline (path signal 100 -750 375 -375 750)) + (outline (path signal 100 -750 -750 -750 375)) + (outline (path signal 100 -375 750 750 750)) + (outline (path signal 100 750 750 750 -750)) + (outline (path signal 100 750 -750 -750 -750)) + (pin Rect[T]Pad_500.000000x300.000000_um 1 -700 400) + (pin Rect[T]Pad_500.000000x300.000000_um 2 -700 -400) + (pin Rect[T]Pad_500.000000x300.000000_um 3 700 -400) + (pin Rect[T]Pad_500.000000x300.000000_um 4 700 400) + (keepout "" (polygon F.Cu 0 22750 550 22450 550 22450 250 22750 250 22750 -250 + 22450 -250 22450 -550 22750 -550 22750 -750 21250 -750 21250 -550 + 21550 -550 21550 -250 21250 -250 21250 250 21550 250 21550 550 + 21250 550 21250 750 22750 750 22750 550)) + ) + (image Capacitor_SMD:C_0805_2012Metric::1 + (outline (polygon signal 0 1695 975 1695 -975 -1695 -975 -1695 975)) + (outline (path signal 120 -261.252 -735 261.252 -735)) + (outline (path signal 120 -261.252 735 261.252 735)) + (outline (path signal 100 -1000 625 -1000 -625 1000 -625 1000 625 -1000 625)) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 1 -950 0) + (pin RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 2 950 0) + ) + (image Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical + (outline (polygon signal 0 1495 -19495 -1495 -19495 -1495 1495 1495 1495)) + (outline (path signal 120 -1060 -1000 -1060 -19060)) + (outline (path signal 120 -1060 -1000 1060 -1000)) + (outline (path signal 120 -1060 -19060 1060 -19060)) + (outline (path signal 120 0 1060 1060 1060)) + (outline (path signal 120 1060 1060 1060 0)) + (outline (path signal 120 1060 -1000 1060 -19060)) + (outline (path signal 100 -1000 1000 500 1000)) + (outline (path signal 100 -1000 -19000 -1000 1000)) + (outline (path signal 100 500 1000 1000 500)) + (outline (path signal 100 1000 500 1000 -19000)) + (outline (path signal 100 1000 -19000 -1000 -19000)) + (pin Rect[A]Pad_1350.000000x1350.000000_um 1 0 0) + (pin Round[A]Pad_1350.000000_um 2 0 -2000) + (pin Round[A]Pad_1350.000000_um 3 0 -4000) + (pin Round[A]Pad_1350.000000_um 4 0 -6000) + (pin Round[A]Pad_1350.000000_um 5 0 -8000) + (pin Round[A]Pad_1350.000000_um 6 0 -10000) + (pin Round[A]Pad_1350.000000_um 7 0 -12000) + (pin Round[A]Pad_1350.000000_um 8 0 -14000) + (pin Round[A]Pad_1350.000000_um 9 0 -16000) + (pin Round[A]Pad_1350.000000_um 10 0 -18000) + ) + (image Diode_SMD:D_SMA::1 + (outline (polygon signal 0 3495 -1745 -3495 -1745 -3495 1745 3495 1745)) + (outline (path signal 120 -3510 1650 -3510 -1650)) + (outline (path signal 120 -3510 1650 2000 1650)) + (outline (path signal 120 -3510 -1650 2000 -1650)) + (outline (path signal 100 -2300 -1500 -2300 1500)) + (outline (path signal 100 -649.44 799.08 -649.44 -801.12)) + (outline (path signal 100 -649.44 -1.02 -1551.14 -1.02)) + (outline (path signal 100 -649.44 -1.02 501.18 799.08)) + (outline (path signal 100 -649.44 -1.02 501.18 -750.32)) + (outline (path signal 100 501.18 -1.02 1499.4 -1.02)) + (outline (path signal 100 501.18 -750.32 501.18 799.08)) + (outline (path signal 100 2300 1500 -2300 1500)) + (outline (path signal 100 2300 1500 2300 -1500)) + (outline (path signal 100 2300 -1500 -2300 -1500)) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 1 -2000 0) + (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 2 2000 0) + ) + (image Resistor_SMD:R_1206_3216Metric + (outline (polygon signal 0 2275 -1125 -2275 -1125 -2275 1125 2275 1125)) + (outline (path signal 120 -727.064 910 727.064 910)) + (outline (path signal 120 -727.064 -910 727.064 -910)) + (outline (path signal 100 -1600 800 1600 800 1600 -800 -1600 -800 -1600 800)) + (pin RoundRect[T]Pad_1125.000000x1750.000000_250.951000_um_0.000000_0 1 -1462.5 0) + (pin RoundRect[T]Pad_1125.000000x1750.000000_250.951000_um_0.000000_0 2 1462.5 0) + ) + (image MountingHole:MountingHole_3.2mm + (keepout "" (circle F.Cu 3700)) + (keepout "" (circle In1.Cu 3700)) + (keepout "" (circle In2.Cu 3700)) + (keepout "" (circle B.Cu 3700)) + ) + (image Diode_SMD:D_SMB + (outline (polygon signal 0 3645 -2245 -3645 -2245 -3645 2245 3645 2245)) + (outline (path signal 120 -3660 2150 -3660 -2150)) + (outline (path signal 120 -3660 2150 2150 2150)) + (outline (path signal 120 -3660 -2150 2150 -2150)) + (outline (path signal 100 -2300 -2000 -2300 2000)) + (outline (path signal 100 -649.44 799.08 -649.44 -801.12)) + (outline (path signal 100 -649.44 -1.02 -1551.14 -1.02)) + (outline (path signal 100 -649.44 -1.02 501.18 799.08)) + (outline (path signal 100 -649.44 -1.02 501.18 -750.32)) + (outline (path signal 100 501.18 -1.02 1499.4 -1.02)) + (outline (path signal 100 501.18 -750.32 501.18 799.08)) + (outline (path signal 100 2300 2000 -2300 2000)) + (outline (path signal 100 2300 2000 2300 -2000)) + (outline (path signal 100 2300 -2000 -2300 -2000)) + (pin RoundRect[T]Pad_2500.000000x2300.000000_250.951000_um_0.000000_0 1 -2150 0) + (pin RoundRect[T]Pad_2500.000000x2300.000000_250.951000_um_0.000000_0 2 2150 0) + ) + (image Resistor_SMD:R_0603_1608Metric::2 + (outline (polygon signal 0 1475 725 1475 -725 -1475 -725 -1475 725)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 100 -800 412.5 -800 -412.5 800 -412.5 800 412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical + (outline (polygon signal 0 1765 -6845 -1765 -6845 -1765 1765 1765 1765)) + (outline (path signal 120 -1380 1380 0 1380)) + (outline (path signal 120 -1380 0 -1380 1380)) + (outline (path signal 120 -1380 -1270 -1380 -6460)) + (outline (path signal 120 -1380 -1270 1380 -1270)) + (outline (path signal 120 -1380 -6460 1380 -6460)) + (outline (path signal 120 1380 -1270 1380 -6460)) + (outline (path signal 100 -1270 635 -635 1270)) + (outline (path signal 100 -1270 -6350 -1270 635)) + (outline (path signal 100 -635 1270 1270 1270)) + (outline (path signal 100 1270 1270 1270 -6350)) + (outline (path signal 100 1270 -6350 -1270 -6350)) + (pin Rect[A]Pad_1700.000000x1700.000000_um 1 0 0) + (pin Round[A]Pad_1700.000000_um 2 0 -2540) + (pin Round[A]Pad_1700.000000_um 3 0 -5080) + ) + (image "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (outline (polygon signal 0 5145 -4395 -5145 -4395 -5145 4395 5145 4395)) + (outline (path signal 120 -2050 4150 2050 4150)) + (outline (path signal 120 -2050 -4150 -4150 -2050)) + (outline (path signal 120 2050 4150 4150 2050)) + (outline (path signal 120 2050 -4150 -2050 -4150)) + (outline (path signal 120 2050 -4150 4150 -2050)) + (outline (path signal 100 -4000 2000 -2000 4000)) + (outline (path signal 100 -4000 -2000 -4000 2000)) + (outline (path signal 100 -2000 4000 2000 4000)) + (outline (path signal 100 -2000 -4000 -4000 -2000)) + (outline (path signal 100 2000 4000 4000 2000)) + (outline (path signal 100 2000 -4000 -2000 -4000)) + (outline (path signal 100 4000 2000 4000 -2000)) + (outline (path signal 100 4000 -2000 2000 -4000)) + (outline (path signal 100 3000 0 2980.45 -341.974 2922.04 -679.49 2825.53 -1008.15 + 2692.2 -1323.66 2523.76 -1621.92 2322.43 -1899.04 2090.81 -2151.39 + 1831.94 -2375.71 1549.19 -2569.05 1246.24 -2728.9 927.051 -2853.17 + 595.771 -2940.25 256.725 -2988.99 -85.668 -2998.78 -426.945 -2969.46 + -762.655 -2901.44 -1088.42 -2795.59 -1400 -2653.3 -1693.33 -2476.42 + -1964.58 -2267.25 -2210.22 -2028.53 -2427.05 -1763.36 -2612.24 -1475.2 + -2763.37 -1167.81 -2878.48 -845.198 -2956.06 -511.567 -2995.11 -171.266 + -2995.11 171.266 -2956.06 511.567 -2878.48 845.198 -2763.37 1167.81 + -2612.24 1475.2 -2427.05 1763.36 -2210.22 2028.53 -1964.58 2267.25 + -1693.33 2476.42 -1400 2653.3 -1088.42 2795.59 -762.655 2901.44 + -426.945 2969.46 -85.668 2998.78 256.725 2988.99 595.771 2940.25 + 927.051 2853.17 1246.24 2728.9 1549.19 2569.05 1831.94 2375.71 + 2090.81 2151.39 2322.43 1899.04 2523.76 1621.92 2692.2 1323.66 + 2825.53 1008.15 2922.04 679.49 2980.45 341.974 3000 0)) + (pin Rect[T]Pad_2000.000000x3200.000000_um 1 -3900 0) + (pin Rect[T]Pad_2000.000000x3200.000000_um 2 3900 0) + ) + (image "Package_TO_SOT_SMD:SOT-563" + (outline (polygon signal 0 745 825 1195 825 1195 -825 745 -825 745 -945 -745 -945 + -745 -825 -1195 -825 -1195 825 -745 825 -745 945 745 945)) + (outline (path signal 120 -425.568 935 710 935)) + (outline (path signal 120 710 -935 -710 -935)) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 1 -712.5 500) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 2 -712.5 0) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 3 -712.5 -500) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 4 712.5 -500) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 5 712.5 0) + (pin RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 6 712.5 500) + ) + (image TestPoint:TestPoint_Pad_D1.5mm + (outline (polygon signal 0 277.598 1216.23 490.3 1147.12 687.248 1041.13 862.103 901.692 + 1009.25 733.266 1123.96 541.272 1202.55 331.886 1242.49 111.77 + 1245 0 1242.49 -111.769 1202.55 -331.885 1123.96 -541.271 + 1009.25 -733.265 862.103 -901.691 687.248 -1041.13 490.3 -1147.12 + 277.598 -1216.23 55.967 -1246.25 -167.455 -1236.21 -385.502 -1186.45 + -591.157 -1098.55 -777.808 -975.339 -939.461 -820.782 -1070.92 -639.845 + -1167.96 -438.342 -1227.46 -222.75 -1247.51 0 -1227.46 222.751 + -1167.96 438.343 -1070.92 639.846 -939.461 820.783 -777.808 975.34 + -591.157 1098.55 -385.502 1186.45 -167.455 1236.22 55.967 1246.25)) + (outline (path signal 120 950 0 931.746 -185.336 877.686 -363.549 789.896 -527.792 + 671.751 -671.751 527.792 -789.896 363.549 -877.686 185.336 -931.746 + 0 -950 -185.336 -931.746 -363.549 -877.686 -527.792 -789.896 + -671.751 -671.751 -789.896 -527.792 -877.686 -363.549 -931.746 -185.336 + -950 0 -931.746 185.336 -877.686 363.549 -789.896 527.792 + -671.751 671.751 -527.792 789.896 -363.549 877.686 -185.336 931.746 + 0 950 185.336 931.746 363.549 877.686 527.792 789.896 671.751 671.751 + 789.896 527.792 877.686 363.549 931.746 185.336 950 0)) + (pin Round[T]Pad_1500.000000_um 1 0 0) + ) + (image Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (outline (polygon signal 0 3295 745 4745 745 4745 -745 3295 -745 3295 -2095 + -3295 -2095 -3295 -745 -4745 -745 -4745 745 -3295 745 -3295 2095 + 3295 2095)) + (outline (path signal 120 -3200 2000 -3200 800)) + (outline (path signal 120 -3200 -800 -3200 -2000)) + (outline (path signal 120 -3200 -2000 3200 -2000)) + (outline (path signal 120 3200 2000 -3200 2000)) + (outline (path signal 120 3200 800 3200 2000)) + (outline (path signal 120 3200 -2000 3200 -800)) + (outline (path signal 120 -1350 650 1350 650 1350 -650 -1350 -650 -1350 650)) + (outline (path signal 100 -3050 1850 3050 1850 3050 -1850 -3050 -1850 -3050 1850)) + (pin Rect[T]Pad_1250.000000x1000.000000_um 1 -3875 0) + (pin Rect[T]Pad_1250.000000x1000.000000_um 2 3875 0) + ) + (image Capacitor_SMD:C_1210_3225Metric + (outline (polygon signal 0 -2295 -1595 -2295 1595 2295 1595 2295 -1595)) + (outline (path signal 120 -711.252 1360 711.252 1360)) + (outline (path signal 120 -711.252 -1360 711.252 -1360)) + (outline (path signal 100 -1600 1250 -1600 -1250 1600 -1250 1600 1250 -1600 1250)) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 1 -1475 0) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 2 1475 0) + ) + (image Resistor_SMD:R_0603_1608Metric::3 + (outline (polygon signal 0 -1475 -725 -1475 725 1475 725 1475 -725)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 100 -800 412.5 -800 -412.5 800 -412.5 800 412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" + (outline (polygon signal 0 10445 -3895 -2945 -3895 -2945 2845 10445 2845)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 -2560 2460 10060 2460 10060 -3510 -2560 -3510 -2560 2460)) + (outline (path signal 120 -2550 2450 -750 2450 -750 1700 -2550 1700 -2550 2450)) + (outline (path signal 120 750 2450 6750 2450 6750 1700 750 1700 750 2450)) + (outline (path signal 120 8250 2450 10050 2450 10050 1700 8250 1700 8250 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 9950 2350 9950 -3400 -2450 -3400 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 4 7500 0) + ) + (image "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (outline (polygon signal 0 2295 -1245 -2295 -1245 -2295 1245 2295 1245)) + (outline (path signal 0 -750 750 750 750 750 -750 -750 -750 -750 750)) + (outline (path signal 120 -2050 -300 -2050 300)) + (outline (path signal 120 -1500 -1500 -900 -1500)) + (outline (path signal 120 -1400 1000 1400 1000)) + (outline (path signal 120 -1200 -1200 -1500 -1500)) + (outline (path signal 120 -1200 -1200 -900 -1500)) + (outline (path signal 120 1400 -1000 -1400 -1000)) + (outline (path signal 120 2050 300 2050 -300)) + (outline (polygon signal 0 -1990 300 -2001.46 264.733 -2031.46 242.937 -2068.54 242.937 + -2098.54 264.733 -2110 300 -2095.4 448.269 -2052.15 590.84 + -1981.92 722.234 -1887.4 837.401 -1772.23 931.917 -1640.84 1002.15 + -1498.27 1045.4 -1350 1060 -1314.73 1048.54 -1292.94 1018.54 + -1292.94 981.459 -1314.73 951.459 -1350 940 -1422.11 940 + -1562.72 907.908 -1692.65 845.333 -1805.41 755.412 -1895.33 642.655 + -1957.91 512.716 -1990 372.111 -1990 300)) + (outline (polygon signal 0 -1350 -940 -1314.73 -951.459 -1292.94 -981.459 -1292.94 -1018.54 + -1314.73 -1048.54 -1350 -1060 -1498.27 -1045.4 -1640.84 -1002.15 + -1772.23 -931.917 -1887.4 -837.401 -1981.92 -722.234 -2052.15 -590.84 + -2095.4 -448.269 -2110 -300 -2098.54 -264.733 -2068.54 -242.937 + -2031.46 -242.937 -2001.46 -264.733 -1990 -300 -1990 -372.111 + -1957.91 -512.716 -1895.33 -642.655 -1805.41 -755.412 -1692.65 -845.333 + -1562.72 -907.908 -1422.11 -940 -1350 -940)) + (outline (polygon signal 0 1350 940 1314.73 951.459 1292.94 981.459 1292.94 1018.54 + 1314.73 1048.54 1350 1060 1498.27 1045.4 1640.84 1002.15 + 1772.23 931.917 1887.4 837.401 1981.92 722.234 2052.15 590.84 + 2095.4 448.269 2110 300 2098.54 264.733 2068.54 242.937 2031.46 242.937 + 2001.46 264.733 1990 300 1990 372.111 1957.91 512.716 1895.33 642.655 + 1805.41 755.412 1692.65 845.333 1562.72 907.908 1422.11 940 + 1350 940)) + (outline (polygon signal 0 1990 -300 2001.46 -264.733 2031.46 -242.937 2068.54 -242.937 + 2098.54 -264.733 2110 -300 2095.4 -448.269 2052.15 -590.84 + 1981.92 -722.234 1887.4 -837.401 1772.23 -931.917 1640.84 -1002.15 + 1498.27 -1045.4 1350 -1060 1314.73 -1048.54 1292.94 -1018.54 + 1292.94 -981.459 1314.73 -951.459 1350 -940 1422.11 -940 + 1562.72 -907.908 1692.65 -845.333 1805.41 -755.412 1895.33 -642.655 + 1957.91 -512.716 1990 -372.111 1990 -300)) + (pin Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_990DCDE6AD7E39367AA0DEC71F4DEF99 1 -1300 0) + (pin Rect[T]Pad_1000.000000x1500.000000_um 2 0 0) + (pin Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_8D8E21F0723AC27F1E3DCB4B20CFF501 3 1300 0) + ) + (image "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" + (outline (polygon signal 0 1645 -1245 -1645 -1245 -1645 1245 1645 1245)) + (outline (path signal 0 -150 750 150 750 150 -750 -150 -750 -150 750)) + (outline (path signal 120 -1400 -300 -1400 300)) + (outline (path signal 120 -700 1000 700 1000)) + (outline (path signal 120 700 -1000 -700 -1000)) + (outline (path signal 120 1400 300 1400 -300)) + (outline (polygon signal 0 -1340 300 -1351.46 264.733 -1381.46 242.937 -1418.54 242.937 + -1448.54 264.733 -1460 300 -1445.4 448.269 -1402.15 590.84 + -1331.92 722.234 -1237.4 837.401 -1122.23 931.917 -990.84 1002.15 + -848.269 1045.4 -700 1060 -664.733 1048.54 -642.937 1018.54 + -642.937 981.459 -664.733 951.459 -700 940 -772.111 940 -912.716 907.908 + -1042.65 845.333 -1155.41 755.412 -1245.33 642.655 -1307.91 512.716 + -1340 372.111 -1340 300)) + (outline (polygon signal 0 -700 -940 -664.733 -951.459 -642.937 -981.459 -642.937 -1018.54 + -664.733 -1048.54 -700 -1060 -848.269 -1045.4 -990.84 -1002.15 + -1122.23 -931.917 -1237.4 -837.401 -1331.92 -722.234 -1402.15 -590.84 + -1445.4 -448.269 -1460 -300 -1448.54 -264.733 -1418.54 -242.937 + -1381.46 -242.937 -1351.46 -264.733 -1340 -300 -1340 -372.111 + -1307.91 -512.716 -1245.33 -642.655 -1155.41 -755.412 -1042.65 -845.333 + -912.716 -907.908 -772.111 -940 -700 -940)) + (outline (polygon signal 0 700 940 664.733 951.459 642.937 981.459 642.937 1018.54 + 664.733 1048.54 700 1060 848.269 1045.4 990.84 1002.15 1122.23 931.917 + 1237.4 837.401 1331.92 722.234 1402.15 590.84 1445.4 448.269 + 1460 300 1448.54 264.733 1418.54 242.937 1381.46 242.937 + 1351.46 264.733 1340 300 1340 372.111 1307.91 512.716 1245.33 642.655 + 1155.41 755.412 1042.65 845.333 912.716 907.908 772.111 940 + 700 940)) + (outline (polygon signal 0 1340 -300 1351.46 -264.733 1381.46 -242.937 1418.54 -242.937 + 1448.54 -264.733 1460 -300 1445.4 -448.269 1402.15 -590.84 + 1331.92 -722.234 1237.4 -837.401 1122.23 -931.917 990.84 -1002.15 + 848.269 -1045.4 700 -1060 664.733 -1048.54 642.937 -1018.54 + 642.937 -981.459 664.733 -951.459 700 -940 772.111 -940 912.716 -907.908 + 1042.65 -845.333 1155.41 -755.412 1245.33 -642.655 1307.91 -512.716 + 1340 -372.111 1340 -300)) + (pin Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_BD66147BA5415864FF86D5BB75C674D5 1 -650 0) + (pin Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_86772D42E08000F807F2952CF30D331A 2 650 0) + ) + (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::2" + (outline (polygon signal 0 -2945 -3895 -2945 2845 5445 2845 5445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 5060 -3510 5060 2460 -2560 2460)) + (outline (path signal 120 3250 2450 3250 1700 5050 1700 5050 2450 3250 2450)) + (outline (path signal 120 750 2450 750 1700 1750 1700 1750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 4950 -3400 4950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um 2 2500 0) + ) + (image Capacitor_SMD:C_1210_3225Metric::1 + (outline (polygon signal 0 2295 -1595 -2295 -1595 -2295 1595 2295 1595)) + (outline (path signal 120 -711.252 1360 711.252 1360)) + (outline (path signal 120 -711.252 -1360 711.252 -1360)) + (outline (path signal 100 -1600 1250 1600 1250 1600 -1250 -1600 -1250 -1600 1250)) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 1 -1475 0) + (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 2 1475 0) + ) + (image Connector_USB:USB_C_Receptacle_GCT_USB4085 + (outline (polygon signal 0 8245 -9105 -2295 -9105 -2295 1055 8245 1055)) + (outline (path signal 120 -1620 -2400 -1620 -3300)) + (outline (path signal 120 -1620 -6000 -1620 -8730)) + (outline (path signal 120 -1620 -8730 7570 -8730)) + (outline (path signal 120 -1500 680 7450 680)) + (outline (path signal 120 7570 -2400 7570 -3300)) + (outline (path signal 120 7570 -6000 7570 -8730)) + (outline (path signal 100 -1500 560 -1500 -8610)) + (outline (path signal 100 -1500 560 7450 560)) + (outline (path signal 100 -1500 -8610 7450 -8610)) + (outline (path signal 100 -25 -6100 5975 -6100)) + (outline (path signal 100 7450 560 7450 -8610)) + (pin Round[A]Pad_700.000000_um A1 0 0) + (pin Round[A]Pad_700.000000_um A4 850 0) + (pin Round[A]Pad_700.000000_um A5 1700 0) + (pin Round[A]Pad_700.000000_um A6 2550 0) + (pin Round[A]Pad_700.000000_um A7 3400 0) + (pin Round[A]Pad_700.000000_um A8 4250 0) + (pin Round[A]Pad_700.000000_um A9 5100 0) + (pin Round[A]Pad_700.000000_um A12 5950 0) + (pin Round[A]Pad_700.000000_um B1 5950 -1350) + (pin Round[A]Pad_700.000000_um B4 5100 -1350) + (pin Round[A]Pad_700.000000_um B5 4250 -1350) + (pin Round[A]Pad_700.000000_um B6 3400 -1350) + (pin Round[A]Pad_700.000000_um B7 2550 -1350) + (pin Round[A]Pad_700.000000_um B8 1700 -1350) + (pin Round[A]Pad_700.000000_um B9 850 -1350) + (pin Round[A]Pad_700.000000_um B12 0 -1350) + (pin Oval[A]Pad_900.000000x2400.000000_um SH -1350 -980) + (pin Oval[A]Pad_900.000000x1700.000000_um SH@1 -1350 -4360) + (pin Oval[A]Pad_900.000000x2400.000000_um SH@2 7300 -980) + (pin Oval[A]Pad_900.000000x1700.000000_um SH@3 7300 -4360) + ) + (image "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" + (outline (polygon signal 0 22995 -5095 -2995 -5095 -2995 5705 22995 5705)) + (outline (path signal 120 -2620 5320 22620 5320)) + (outline (path signal 120 -2620 2300 22620 2300)) + (outline (path signal 120 -2620 -2600 22620 -2600)) + (outline (path signal 120 -2620 -4100 22620 -4100)) + (outline (path signal 120 -2620 -4720 -2620 5320)) + (outline (path signal 120 -300 -4720 -2620 -4720)) + (outline (path signal 120 22620 5320 22620 -4720)) + (outline (path signal 120 22620 -4720 300 -4720)) + (outline (path signal 100 -2500 5200 22500 5200)) + (outline (path signal 100 -2500 2300 22500 2300)) + (outline (path signal 100 -2500 -2600 22500 -2600)) + (outline (path signal 100 -2500 -4100 -2500 5200)) + (outline (path signal 100 -2500 -4100 22500 -4100)) + (outline (path signal 100 -2000 -4600 -2500 -4100)) + (outline (path signal 100 955 1138 -1138 -955)) + (outline (path signal 100 1138 955 -955 -1138)) + (outline (path signal 100 5955 1138 3862 -955)) + (outline (path signal 100 6138 955 4045 -1138)) + (outline (path signal 100 10955 1138 8862 -955)) + (outline (path signal 100 11138 955 9045 -1138)) + (outline (path signal 100 15955 1138 13862 -955)) + (outline (path signal 100 16138 955 14045 -1138)) + (outline (path signal 100 20955 1138 18862 -955)) + (outline (path signal 100 21138 955 19045 -1138)) + (outline (path signal 100 22500 5200 22500 -4600)) + (outline (path signal 100 22500 -4600 -2000 -4600)) + (outline (path signal 100 1500 0 1480.58 -240.617 1422.81 -475.002 1328.18 -697.085 + 1199.16 -901.113 1039.09 -1081.8 852.097 -1234.48 643.039 -1355.18 + 417.326 -1440.78 180.805 -1489.06 -60.399 -1498.78 -300.039 -1469.69 + -531.907 -1402.52 -750 -1299.04 -948.668 -1161.91 -1122.77 -994.684 + -1267.79 -801.699 -1379.97 -587.95 -1456.41 -358.973 -1495.14 -120.7 + -1495.14 120.7 -1456.41 358.973 -1379.97 587.95 -1267.79 801.699 + -1122.77 994.684 -948.668 1161.91 -750 1299.04 -531.907 1402.52 + -300.039 1469.69 -60.399 1498.78 180.805 1489.06 417.326 1440.78 + 643.039 1355.18 852.097 1234.48 1039.09 1081.8 1199.16 901.113 + 1328.18 697.085 1422.81 475.002 1480.58 240.617 1500 0)) + (outline (path signal 100 6500 0 6480.57 -240.617 6422.81 -475.002 6328.18 -697.085 + 6199.16 -901.113 6039.09 -1081.8 5852.1 -1234.48 5643.04 -1355.18 + 5417.33 -1440.78 5180.81 -1489.06 4939.6 -1498.78 4699.96 -1469.69 + 4468.09 -1402.52 4250 -1299.04 4051.33 -1161.91 3877.23 -994.684 + 3732.22 -801.699 3620.03 -587.95 3543.59 -358.973 3504.86 -120.7 + 3504.86 120.7 3543.59 358.973 3620.03 587.95 3732.22 801.699 + 3877.23 994.684 4051.33 1161.91 4250 1299.04 4468.09 1402.52 + 4699.96 1469.69 4939.6 1498.78 5180.81 1489.06 5417.33 1440.78 + 5643.04 1355.18 5852.1 1234.48 6039.09 1081.8 6199.16 901.113 + 6328.18 697.085 6422.81 475.002 6480.57 240.617 6500 0)) + (outline (path signal 100 11500 0 11480.6 -240.617 11422.8 -475.002 11328.2 -697.085 + 11199.2 -901.113 11039.1 -1081.8 10852.1 -1234.48 10643 -1355.18 + 10417.3 -1440.78 10180.8 -1489.06 9939.6 -1498.78 9699.96 -1469.69 + 9468.09 -1402.52 9250 -1299.04 9051.33 -1161.91 8877.23 -994.684 + 8732.22 -801.699 8620.03 -587.95 8543.59 -358.973 8504.86 -120.7 + 8504.86 120.7 8543.59 358.973 8620.03 587.95 8732.22 801.699 + 8877.23 994.684 9051.33 1161.91 9250 1299.04 9468.09 1402.52 + 9699.96 1469.69 9939.6 1498.78 10180.8 1489.06 10417.3 1440.78 + 10643 1355.18 10852.1 1234.48 11039.1 1081.8 11199.2 901.113 + 11328.2 697.085 11422.8 475.002 11480.6 240.617 11500 0)) + (outline (path signal 100 16500 0 16480.6 -240.617 16422.8 -475.002 16328.2 -697.085 + 16199.2 -901.113 16039.1 -1081.8 15852.1 -1234.48 15643 -1355.18 + 15417.3 -1440.78 15180.8 -1489.06 14939.6 -1498.78 14700 -1469.69 + 14468.1 -1402.52 14250 -1299.04 14051.3 -1161.91 13877.2 -994.684 + 13732.2 -801.699 13620 -587.95 13543.6 -358.973 13504.9 -120.7 + 13504.9 120.7 13543.6 358.973 13620 587.95 13732.2 801.699 + 13877.2 994.684 14051.3 1161.91 14250 1299.04 14468.1 1402.52 + 14700 1469.69 14939.6 1498.78 15180.8 1489.06 15417.3 1440.78 + 15643 1355.18 15852.1 1234.48 16039.1 1081.8 16199.2 901.113 + 16328.2 697.085 16422.8 475.002 16480.6 240.617 16500 0)) + (outline (path signal 100 21500 0 21480.6 -240.617 21422.8 -475.002 21328.2 -697.085 + 21199.2 -901.113 21039.1 -1081.8 20852.1 -1234.48 20643 -1355.18 + 20417.3 -1440.78 20180.8 -1489.06 19939.6 -1498.78 19700 -1469.69 + 19468.1 -1402.52 19250 -1299.04 19051.3 -1161.91 18877.2 -994.684 + 18732.2 -801.699 18620 -587.95 18543.6 -358.973 18504.9 -120.7 + 18504.9 120.7 18543.6 358.973 18620 587.95 18732.2 801.699 + 18877.2 994.684 19051.3 1161.91 19250 1299.04 19468.1 1402.52 + 19700 1469.69 19939.6 1498.78 20180.8 1489.06 20417.3 1440.78 + 20643 1355.18 20852.1 1234.48 21039.1 1081.8 21199.2 901.113 + 21328.2 697.085 21422.8 475.002 21480.6 240.617 21500 0)) + (pin RoundRect[A]Pad_2600.000000x2600.000000_250.951000_um_0.000000_0 (rotate 270) 1 0 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 2 5000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 3 10000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 4 15000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 5 20000 0) + ) + (image Fuse:Fuse_1812_4532Metric + (outline (polygon signal 0 2945 -1945 -2945 -1945 -2945 1945 2945 1945)) + (outline (path signal 120 -1386.25 1710 1386.25 1710)) + (outline (path signal 120 -1386.25 -1710 1386.25 -1710)) + (outline (path signal 100 -2250 1600 2250 1600 2250 -1600 -2250 -1600 -2250 1600)) + (pin RoundRect[T]Pad_1125.000000x3400.000000_250.951000_um_0.000000_0 1 -2137.5 0) + (pin RoundRect[T]Pad_1125.000000x3400.000000_250.951000_um_0.000000_0 2 2137.5 0) + ) + (image "Relay_THT:Relay_SPDT_Omron_G5V-1" + (outline (polygon signal 0 6445 -11445 -1445 -11445 -1445 1345 6445 1345)) + (outline (path signal 120 -1600 1500 600 1500)) + (outline (path signal 120 -1600 -600 -1600 1500)) + (outline (path signal 120 -1400 1300 6400 1300)) + (outline (path signal 120 -1400 -11400 -1400 1300)) + (outline (path signal 120 762 -3683 762 -4318)) + (outline (path signal 120 762 -4318 1422 -4318)) + (outline (path signal 120 1422 -3810 1422 -4826)) + (outline (path signal 120 1422 -4826 3327 -4826)) + (outline (path signal 120 2946 -3810 2311 -4826)) + (outline (path signal 120 3327 -3810 1422 -3810)) + (outline (path signal 120 3327 -3810 3327 -4826)) + (outline (path signal 120 3962 -3683 3962 -4318)) + (outline (path signal 120 3962 -4318 3327 -4318)) + (outline (path signal 120 6400 1300 6400 -11400)) + (outline (path signal 120 6400 -11400 -1400 -11400)) + (outline (path signal 120 -1200 100 -100 1100)) + (outline (path signal 120 -1200 -11200 -1200 100)) + (outline (path signal 120 -100 1100 6200 1100)) + (outline (path signal 120 6200 1100 6200 -11200)) + (outline (path signal 120 6200 -11200 -1200 -11200)) + (pin Rect[A]Pad_2000.000000x2000.000000_um 1 0 0) + (pin Round[A]Pad_2000.000000_um 2 0 -2540) + (pin Round[A]Pad_2000.000000_um 5 0 -10160) + (pin Round[A]Pad_2000.000000_um 6 5080 -10160) + (pin Round[A]Pad_2000.000000_um 9 5080 -2540) + (pin Round[A]Pad_2000.000000_um 10 5080 0) + ) + (image Capacitor_SMD:CP_Elec_6.3x7.7 + (outline (polygon signal 0 3545 1045 4695 1045 4695 -1045 3545 -1045 3545 -3545 + -2397.93 -3545 -3545 -2397.93 -3545 -1045 -4695 -1045 -4695 1045 + -3545 1045 -3545 2397.93 -2397.93 3545 3545 3545)) + (outline (path signal 120 -4437.5 1847.5 -3650 1847.5)) + (outline (path signal 120 -4043.75 2241.25 -4043.75 1453.75)) + (outline (path signal 120 -3410 2345.56 -3410 1060)) + (outline (path signal 120 -3410 2345.56 -2345.56 3410)) + (outline (path signal 120 -3410 -2345.56 -3410 -1060)) + (outline (path signal 120 -3410 -2345.56 -2345.56 -3410)) + (outline (path signal 120 -2345.56 3410 3410 3410)) + (outline (path signal 120 -2345.56 -3410 3410 -3410)) + (outline (path signal 120 3410 3410 3410 1060)) + (outline (path signal 120 3410 -3410 3410 -1060)) + (outline (path signal 100 -3300 2300 -3300 -2300)) + (outline (path signal 100 -3300 2300 -2300 3300)) + (outline (path signal 100 -3300 -2300 -2300 -3300)) + (outline (path signal 100 -2704.84 1330 -2074.84 1330)) + (outline (path signal 100 -2389.84 1645 -2389.84 1015)) + (outline (path signal 100 -2300 3300 3300 3300)) + (outline (path signal 100 -2300 -3300 3300 -3300)) + (outline (path signal 100 3300 3300 3300 -3300)) + (outline (path signal 100 3150 0 3130.88 -346.526 3073.76 -688.845 2979.32 -1022.8 + 2848.72 -1344.35 2683.55 -1649.57 2485.79 -1934.77 2257.86 -2196.49 + 2002.53 -2431.54 1722.89 -2637.07 1422.33 -2810.6 1104.51 -2950.01 + 773.279 -3053.61 432.664 -3120.14 86.796 -3148.8 -260.125 -3139.24 + -603.888 -3091.57 -940.322 -3006.38 -1265.34 -2884.69 -1575 -2727.98 + -1865.54 -2538.16 -2133.44 -2317.53 -2375.44 -2068.77 -2588.6 -1794.89 + -2770.34 -1499.23 -2918.46 -1185.38 -3031.14 -857.126 -3107.04 -518.473 + -3145.22 -173.526 -3145.22 173.526 -3107.04 518.473 -3031.14 857.126 + -2918.46 1185.38 -2770.34 1499.23 -2588.6 1794.89 -2375.44 2068.77 + -2133.44 2317.53 -1865.54 2538.16 -1575 2727.98 -1265.34 2884.69 + -940.322 3006.38 -603.888 3091.57 -260.125 3139.24 86.796 3148.8 + 432.664 3120.14 773.279 3053.61 1104.51 2950.01 1422.33 2810.6 + 1722.89 2637.07 2002.53 2431.54 2257.86 2196.49 2485.79 1934.77 + 2683.55 1649.57 2848.72 1344.35 2979.32 1022.8 3073.76 688.845 + 3130.88 346.526 3150 0)) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 1 -2700 0) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 2 2700 0) + ) + (image "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (outline (polygon signal 0 1375 2745 2245 2745 2245 1875 2625 1875 2625 -1875 + 2245 -1875 2245 -2745 1375 -2745 1375 -3125 -1375 -3125 + -1375 -2745 -2245 -2745 -2245 -1875 -2625 -1875 -2625 1875 + -2245 1875 -2245 2745 -1375 2745 -1375 3125 1375 3125)) + (outline (path signal 120 -2110 2610 -1385 2610)) + (outline (path signal 120 -2110 1885 -2110 2610)) + (outline (path signal 120 -2110 -2610 -2110 -1885)) + (outline (path signal 120 -1385 -2610 -2110 -2610)) + (outline (path signal 120 1385 2610 2110 2610)) + (outline (path signal 120 2110 2610 2110 1885)) + (outline (path signal 120 2110 -1885 2110 -2610)) + (outline (path signal 120 2110 -2610 1385 -2610)) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 1 -1950 1500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 2 -1950 1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 3 -1950 500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 4 -1950 0) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 5 -1950 -500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 6 -1950 -1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 7 -1950 -1500) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 8 -1000 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 9 -500 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 10 0 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 11 500 -2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 12 1000 -2450) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 13 1950 -1500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 14 1950 -1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 15 1950 -500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 16 1950 0) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 17 1950 500) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 18 1950 1000) + (pin RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 19 1950 1500) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 20 1000 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 21 500 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 22 0 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 23 -500 2450) + (pin RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 24 -1000 2450) + (pin Rect[T]Pad_2650.000000x3650.000000_um 25 0 0) + ) + (image "Package_TO_SOT_SMD:TO-252-2" + (outline (polygon signal 0 4705 -3495 -6385 -3495 -6385 3495 4705 3495)) + (outline (path signal 120 -3310 3450 -3310 3180)) + (outline (path signal 120 -3310 -3450 -3310 -3180)) + (outline (path signal 120 3110 3450 -3310 3450)) + (outline (path signal 120 3110 -3450 -3310 -3450)) + (outline (path signal 100 -5810 2655 -5810 1905)) + (outline (path signal 100 -5810 1905 -3110 1905)) + (outline (path signal 100 -5810 -1905 -5810 -2655)) + (outline (path signal 100 -5810 -2655 -3110 -2655)) + (outline (path signal 100 -3110 -1905 -5810 -1905)) + (outline (path signal 100 -2705 2655 -5810 2655)) + (outline (path signal 100 3110 2700 4110 2700)) + (outline (path signal 100 4110 2700 4110 -2700)) + (outline (path signal 100 4110 -2700 3110 -2700)) + (pin RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 1 -5040 2280) + (pin RoundRect[T]Pad_6400.000000x5800.000000_250.948000_um_0.000000_0 2 1260 0) + (pin RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 3 -5040 -2280) + ) + (image Button_Switch_THT:SW_PUSH_6mm + (outline (polygon signal 0 7995 -5995 -1495 -5995 -1495 1495 7995 1495)) + (outline (path signal 120 -250 -1500 -250 -3000)) + (outline (path signal 120 1000 -5500 5500 -5500)) + (outline (path signal 120 5500 1000 1000 1000)) + (outline (path signal 120 6750 -3000 6750 -1500)) + (outline (path signal 100 250 750 3250 750)) + (outline (path signal 100 250 -5250 250 750)) + (outline (path signal 100 3250 750 6250 750)) + (outline (path signal 100 6250 750 6250 -5250)) + (outline (path signal 100 6250 -5250 250 -5250)) + (outline (path signal 100 5265.56 -2250 5246.79 -2524.45 5190.82 -2793.79 5098.7 -3053 + 4972.14 -3297.26 4813.5 -3522 4625.73 -3723.05 4412.34 -3896.66 + 4177.29 -4039.59 3924.97 -4149.19 3660.08 -4223.41 3387.55 -4260.86 + 3112.45 -4260.86 2839.92 -4223.41 2575.03 -4149.19 2322.71 -4039.59 + 2087.66 -3896.66 1874.27 -3723.05 1686.5 -3522 1527.86 -3297.26 + 1401.3 -3053 1309.18 -2793.79 1253.21 -2524.45 1234.44 -2250 + 1253.21 -1975.55 1309.18 -1706.21 1401.3 -1447 1527.86 -1202.74 + 1686.5 -978.002 1874.27 -776.953 2087.66 -603.345 2322.71 -460.411 + 2575.03 -350.813 2839.92 -276.593 3112.45 -239.135 3387.55 -239.135 + 3660.08 -276.593 3924.97 -350.813 4177.29 -460.411 4412.34 -603.345 + 4625.73 -776.953 4813.5 -978.002 4972.14 -1202.74 5098.7 -1447 + 5190.82 -1706.21 5246.79 -1975.55 5265.56 -2250)) + (pin Round[A]Pad_2000.000000_um (rotate 90) 1 0 0) + (pin Round[A]Pad_2000.000000_um (rotate 90) 1@1 6500 0) + (pin Round[A]Pad_2000.000000_um (rotate 90) 2 0 -4500) + (pin Round[A]Pad_2000.000000_um (rotate 90) 2@1 6500 -4500) + ) + (image Capacitor_SMD:CP_Elec_6.3x7.7::1 + (outline (polygon signal 0 3545 -1045 3545 -3545 -2397.93 -3545 -3545 -2397.93 + -3545 -1045 -4695 -1045 -4695 1045 -3545 1045 -3545 2397.93 + -2397.93 3545 3545 3545 3545 1045 4695 1045 4695 -1045)) + (outline (path signal 120 3410 3410 3410 1060)) + (outline (path signal 120 -2345.56 3410 3410 3410)) + (outline (path signal 120 -3410 2345.56 -2345.56 3410)) + (outline (path signal 120 -3410 2345.56 -3410 1060)) + (outline (path signal 120 -4043.75 2241.25 -4043.75 1453.75)) + (outline (path signal 120 -4437.5 1847.5 -3650 1847.5)) + (outline (path signal 120 -3410 -2345.56 -3410 -1060)) + (outline (path signal 120 -3410 -2345.56 -2345.56 -3410)) + (outline (path signal 120 3410 -3410 3410 -1060)) + (outline (path signal 120 -2345.56 -3410 3410 -3410)) + (outline (path signal 100 3300 3300 3300 -3300)) + (outline (path signal 100 -2300 3300 3300 3300)) + (outline (path signal 100 -3300 2300 -2300 3300)) + (outline (path signal 100 -3300 2300 -3300 -2300)) + (outline (path signal 100 -2389.84 1645 -2389.84 1015)) + (outline (path signal 100 -2704.84 1330 -2074.84 1330)) + (outline (path signal 100 -3300 -2300 -2300 -3300)) + (outline (path signal 100 -2300 -3300 3300 -3300)) + (outline (path signal 100 0 -3150 -346.526 -3130.88 -688.845 -3073.76 -1022.8 -2979.32 + -1344.35 -2848.72 -1649.57 -2683.55 -1934.77 -2485.79 -2196.49 -2257.86 + -2431.54 -2002.53 -2637.07 -1722.89 -2810.6 -1422.33 -2950.01 -1104.51 + -3053.61 -773.279 -3120.14 -432.664 -3148.8 -86.796 -3139.24 260.125 + -3091.57 603.888 -3006.38 940.322 -2884.69 1265.34 -2727.98 1575 + -2538.16 1865.54 -2317.53 2133.44 -2068.77 2375.44 -1794.89 2588.6 + -1499.23 2770.34 -1185.38 2918.46 -857.126 3031.14 -518.473 3107.04 + -173.526 3145.22 173.526 3145.22 518.473 3107.04 857.126 3031.14 + 1185.38 2918.46 1499.23 2770.34 1794.89 2588.6 2068.77 2375.44 + 2317.53 2133.44 2538.16 1865.54 2727.98 1575 2884.69 1265.34 + 3006.38 940.322 3091.57 603.888 3139.24 260.125 3148.8 -86.796 + 3120.14 -432.664 3053.61 -773.279 2950.01 -1104.51 2810.6 -1422.33 + 2637.07 -1722.89 2431.54 -2002.53 2196.49 -2257.86 1934.77 -2485.79 + 1649.57 -2683.55 1344.35 -2848.72 1022.8 -2979.32 688.845 -3073.76 + 346.526 -3130.88 0 -3150)) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 1 -2700 0) + (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 2 2700 0) + ) + (image "Diode_SMD:D_SOD-123" + (outline (polygon signal 0 2345 -1145 -2345 -1145 -2345 1145 2345 1145)) + (outline (path signal 120 -2360 1000 -2360 -1000)) + (outline (path signal 120 -2360 1000 1650 1000)) + (outline (path signal 120 -2360 -1000 1650 -1000)) + (outline (path signal 100 -1400 900 1400 900)) + (outline (path signal 100 -1400 -900 -1400 900)) + (outline (path signal 100 -750 0 -350 0)) + (outline (path signal 100 -350 0 -350 550)) + (outline (path signal 100 -350 0 -350 -550)) + (outline (path signal 100 -350 0 250 400)) + (outline (path signal 100 250 400 250 -400)) + (outline (path signal 100 250 0 750 0)) + (outline (path signal 100 250 -400 -350 0)) + (outline (path signal 100 1400 900 1400 -900)) + (outline (path signal 100 1400 -900 -1400 -900)) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 1 -1650 0) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 2 1650 0) + ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (outline (polygon signal 0 -2945 -3895 -2945 2845 10445 2845 10445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 10060 -3510 10060 2460 -2560 2460)) + (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 9950 -3400 9950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 4 7500 0) + ) + (image "Diode_SMD:D_SOD-123::1" + (outline (polygon signal 0 -2345 1145 2345 1145 2345 -1145 -2345 -1145)) + (outline (path signal 120 -2360 -1000 1650 -1000)) + (outline (path signal 120 -2360 1000 1650 1000)) + (outline (path signal 120 -2360 1000 -2360 -1000)) + (outline (path signal 100 1400 -900 -1400 -900)) + (outline (path signal 100 1400 900 1400 -900)) + (outline (path signal 100 250 -400 -350 0)) + (outline (path signal 100 250 0 750 0)) + (outline (path signal 100 250 400 250 -400)) + (outline (path signal 100 -350 0 250 400)) + (outline (path signal 100 -350 0 -350 -550)) + (outline (path signal 100 -350 0 -350 550)) + (outline (path signal 100 -750 0 -350 0)) + (outline (path signal 100 -1400 -900 -1400 900)) + (outline (path signal 100 -1400 900 1400 900)) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 1 -1650 0) + (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 2 1650 0) + ) + (image Module:Arduino_UNO_R3 + (outline (polygon signal 0 38345 -2.071 40885 -2542.07 40885 -35307.9 38345 -37847.9 + 38345 -49277.9 36577.9 -51045 -28185 -51045 -28185 -41525 + -34535 -41525 -34535 -29595 -28185 -29595 -28185 -9775 -30095 -9775 + -30095 -385 -28185 -385 -28185 2785 38345 2785)) + (outline (path signal 120 -34420 -41400 -28070 -41400)) + (outline (path signal 120 -34420 -29720 -34420 -41400)) + (outline (path signal 120 -29970 -9650 -28070 -9650)) + (outline (path signal 120 -29970 -510 -29970 -9650)) + (outline (path signal 120 -28070 -50930 36580 -50930)) + (outline (path signal 120 -28070 -41400 -28070 -50930)) + (outline (path signal 120 -28070 -29720 -34420 -29720)) + (outline (path signal 120 -28070 -9650 -28070 -29720)) + (outline (path signal 120 -28070 -510 -29970 -510)) + (outline (path signal 120 -28070 2670 -28070 -510)) + (outline (path signal 120 36580 -50930 38230 -49280)) + (outline (path signal 120 38230 -49280 38230 -37850)) + (outline (path signal 120 38230 -37850 40770 -35310)) + (outline (path signal 120 38230 0 38230 2670)) + (outline (path signal 120 38230 2670 -28070 2670)) + (outline (path signal 120 40770 -35310 40770 -2540)) + (outline (path signal 120 40770 -2540 38230 0)) + (outline (path signal 100 -34290 -41270 -34290 -29840)) + (outline (path signal 100 -34290 -29840 -18410 -29840)) + (outline (path signal 100 -29840 -9530 -29840 -640)) + (outline (path signal 100 -29840 -640 -16510 -640)) + (outline (path signal 100 -27940 -50800 -27940 2540)) + (outline (path signal 100 -27940 2540 38100 2540)) + (outline (path signal 100 -18410 -41270 -34290 -41270)) + (outline (path signal 100 -18410 -29840 -18410 -41270)) + (outline (path signal 100 -16510 -9530 -29840 -9530)) + (outline (path signal 100 -16510 -640 -16510 -9530)) + (outline (path signal 100 36580 -50800 -27940 -50800)) + (outline (path signal 100 38100 -49280 36580 -50800)) + (outline (path signal 100 38100 -37850 38100 -49280)) + (outline (path signal 100 38100 0 40640 -2540)) + (outline (path signal 100 38100 2540 38100 0)) + (outline (path signal 100 40640 -35310 38100 -37850)) + (outline (path signal 100 40640 -2540 40640 -35310)) + (pin Rect[A]Pad_1600.000000x1600.000000_um (rotate 90) 1 0 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 2 2540 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 3 5080 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 4 7620 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 5 10160 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 6 12700 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 7 15240 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 8 17780 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 9 22860 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 10 25400 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 11 27940 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 12 30480 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 13 33020 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 14 35560 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 15 35560 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 16 33020 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 17 30480 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 18 27940 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 19 25400 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 20 22860 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 21 20320 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 22 17780 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 23 13720 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 24 11180 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 25 8640 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 26 6100 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 27 3560 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 28 1020 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 29 -1520 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 30 -4060 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 31 -6600 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 32 -9140 -48260) + ) + (padstack Round[A]Pad_1350.000000_um + (shape (circle F.Cu 1350)) + (shape (circle In1.Cu 1350)) + (shape (circle In2.Cu 1350)) + (shape (circle B.Cu 1350)) + (attach off) + ) + (padstack Round[T]Pad_1500.000000_um + (shape (circle F.Cu 1500)) + (attach off) + ) + (padstack Round[A]Pad_1700.000000_um + (shape (circle F.Cu 1700)) + (shape (circle In1.Cu 1700)) + (shape (circle In2.Cu 1700)) + (shape (circle B.Cu 1700)) + (attach off) + ) + (padstack Round[A]Pad_2000.000000_um + (shape (circle F.Cu 2000)) + (shape (circle In1.Cu 2000)) + (shape (circle In2.Cu 2000)) + (shape (circle B.Cu 2000)) + (attach off) + ) + (padstack Round[A]Pad_2600.000000_um + (shape (circle F.Cu 2600)) + (shape (circle In1.Cu 2600)) + (shape (circle In2.Cu 2600)) + (shape (circle B.Cu 2600)) + (attach off) + ) + (padstack Round[A]Pad_700.000000_um + (shape (circle F.Cu 700)) + (shape (circle In1.Cu 700)) + (shape (circle In2.Cu 700)) + (shape (circle B.Cu 700)) + (attach off) + ) + (padstack Oval[A]Pad_1600.000000x1600.000000_um + (shape (path F.Cu 1600 0 0 0 0)) + (shape (path In1.Cu 1600 0 0 0 0)) + (shape (path In2.Cu 1600 0 0 0 0)) + (shape (path B.Cu 1600 0 0 0 0)) + (attach off) + ) + (padstack Oval[A]Pad_1700.000000x1950.000000_um + (shape (path F.Cu 1700 0 -125 0 125)) + (shape (path In1.Cu 1700 0 -125 0 125)) + (shape (path In2.Cu 1700 0 -125 0 125)) + (shape (path B.Cu 1700 0 -125 0 125)) + (attach off) + ) + (padstack Oval[A]Pad_1700.000000x2000.000000_um + (shape (path F.Cu 1700 0 -150 0 150)) + (shape (path In1.Cu 1700 0 -150 0 150)) + (shape (path In2.Cu 1700 0 -150 0 150)) + (shape (path B.Cu 1700 0 -150 0 150)) + (attach off) + ) + (padstack Oval[A]Pad_900.000000x1700.000000_um + (shape (path F.Cu 900 0 -400 0 400)) + (shape (path In1.Cu 900 0 -400 0 400)) + (shape (path In2.Cu 900 0 -400 0 400)) + (shape (path B.Cu 900 0 -400 0 400)) + (attach off) + ) + (padstack Oval[A]Pad_900.000000x2400.000000_um + (shape (path F.Cu 900 0 -750 0 750)) + (shape (path In1.Cu 900 0 -750 0 750)) + (shape (path In2.Cu 900 0 -750 0 750)) + (shape (path B.Cu 900 0 -750 0 750)) + (attach off) + ) + (padstack RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1100.95 350 -1081.85 446.035 -1027.45 527.449 -946.035 581.848 + -849.999 600.95 850 600.951 946.035 581.848 1027.45 527.449 + 1081.85 446.035 1100.95 349.999 1100.95 -350 1081.85 -446.035 + 1027.45 -527.449 946.035 -581.848 849.999 -600.95 -850 -600.951 + -946.035 -581.848 -1027.45 -527.449 -1081.85 -446.035 -1100.95 -349.999 + -1100.95 350)) + (attach off) + ) + (padstack RoundRect[T]Pad_250.000000x850.000000_62.738000_um_0.000000_0 + (shape (polygon F.Cu 0 -125.238 362.5 -120.462 386.509 -106.862 406.862 -86.509 420.462 + -62.5 425.238 62.5 425.238 86.509 420.462 106.862 406.862 + 120.462 386.509 125.238 362.5 125.238 -362.5 120.462 -386.509 + 106.862 -406.862 86.509 -420.462 62.5 -425.238 -62.5 -425.238 + -86.509 -420.462 -106.862 -406.862 -120.462 -386.509 -125.238 -362.5 + -125.238 362.5)) + (attach off) + ) + (padstack RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1250.95 650 -1231.85 746.035 -1177.45 827.449 -1096.04 881.848 + -999.999 900.95 1000 900.951 1096.04 881.848 1177.45 827.449 + 1231.85 746.035 1250.95 649.999 1250.95 -650 1231.85 -746.035 + 1177.45 -827.449 1096.04 -881.848 999.999 -900.95 -1000 -900.951 + -1096.04 -881.848 -1177.45 -827.449 -1231.85 -746.035 -1250.95 -649.999 + -1250.95 650)) + (attach off) + ) + (padstack RoundRect[T]Pad_2500.000000x2300.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1250.95 900 -1231.85 996.035 -1177.45 1077.45 -1096.04 1131.85 + -999.999 1150.95 1000 1150.95 1096.04 1131.85 1177.45 1077.45 + 1231.85 996.035 1250.95 899.999 1250.95 -900 1231.85 -996.035 + 1177.45 -1077.45 1096.04 -1131.85 999.999 -1150.95 -1000 -1150.95 + -1096.04 -1131.85 -1177.45 -1077.45 -1231.85 -996.035 -1250.95 -899.999 + -1250.95 900)) + (attach off) + ) + (padstack RoundRect[A]Pad_2600.000000x2600.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon In1.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon In2.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon B.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (attach off) + ) + (padstack RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -1750.95 550 -1731.85 646.035 -1677.45 727.449 -1596.04 781.848 + -1500 800.95 1500 800.951 1596.04 781.848 1677.45 727.449 + 1731.85 646.035 1750.95 549.999 1750.95 -550 1731.85 -646.035 + 1677.45 -727.449 1596.04 -781.848 1500 -800.95 -1500 -800.951 + -1596.04 -781.848 -1677.45 -727.449 -1731.85 -646.035 -1750.95 -549.999 + -1750.95 550)) + (attach off) + ) + (padstack RoundRect[T]Pad_6400.000000x5800.000000_250.948000_um_0.000000_0 + (shape (polygon F.Cu 0 -3200.95 2650 -3181.85 2746.04 -3127.45 2827.45 -3046.04 2881.85 + -2950 2900.95 2950 2900.95 3046.04 2881.85 3127.45 2827.45 + 3181.85 2746.04 3200.95 2650 3200.95 -2650 3181.85 -2746.04 + 3127.45 -2827.45 3046.04 -2881.85 2950 -2900.95 -2950 -2900.95 + -3046.04 -2881.85 -3127.45 -2827.45 -3181.85 -2746.04 -3200.95 -2650 + -3200.95 2650)) + (attach off) + ) + (padstack RoundRect[T]Pad_675.000000x350.000000_87.833000_um_0.000000_0 + (shape (polygon F.Cu 0 -337.833 87.5 -331.147 121.112 -312.107 149.607 -283.612 168.647 + -249.999 175.332 250 175.333 283.612 168.647 312.107 149.607 + 331.147 121.112 337.832 87.499 337.833 -87.5 331.147 -121.112 + 312.107 -149.607 283.612 -168.647 249.999 -175.332 -250 -175.333 + -283.612 -168.647 -312.107 -149.607 -331.147 -121.112 -337.832 -87.499 + -337.833 87.5)) + (attach off) + ) + (padstack RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 + (shape (polygon F.Cu 0 -400.761 275 -385.479 351.828 -341.959 416.959 -276.828 460.479 + -199.999 475.76 200 475.761 276.828 460.479 341.959 416.959 + 385.479 351.828 400.76 274.999 400.761 -275 385.479 -351.828 + 341.959 -416.959 276.828 -460.479 199.999 -475.76 -200 -475.761 + -276.828 -460.479 -341.959 -416.959 -385.479 -351.828 -400.76 -274.999 + -400.761 275)) + (attach off) + ) + (padstack RoundRect[T]Pad_850.000000x250.000000_62.738000_um_0.000000_0 + (shape (polygon F.Cu 0 -425.238 62.5 -420.462 86.509 -406.862 106.862 -386.509 120.462 + -362.5 125.238 362.5 125.238 386.509 120.462 406.862 106.862 + 420.462 86.509 425.238 62.5 425.238 -62.5 420.462 -86.509 + 406.862 -106.862 386.509 -120.462 362.5 -125.238 -362.5 -125.238 + -386.509 -120.462 -406.862 -106.862 -420.462 -86.509 -425.238 -62.5 + -425.238 62.5)) + (attach off) + ) + (padstack RoundRect[T]Pad_900.000000x950.000000_225.856000_um_0.000000_0 + (shape (polygon F.Cu 0 -450.856 250 -433.664 336.431 -384.704 409.704 -311.431 458.664 + -225 475.856 225 475.856 311.431 458.664 384.704 409.704 + 433.664 336.431 450.856 250 450.856 -250 433.664 -336.431 + 384.704 -409.704 311.431 -458.664 225 -475.856 -225 -475.856 + -311.431 -458.664 -384.704 -409.704 -433.664 -336.431 -450.856 -250 + -450.856 250)) + (attach off) + ) + (padstack RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 + (shape (polygon F.Cu 0 -450.856 375 -433.664 461.431 -384.704 534.704 -311.431 583.664 + -225 600.856 225 600.856 311.431 583.664 384.704 534.704 + 433.664 461.431 450.856 375 450.856 -375 433.664 -461.431 + 384.704 -534.704 311.431 -583.664 225 -600.856 -225 -600.856 + -311.431 -583.664 -384.704 -534.704 -433.664 -461.431 -450.856 -375 + -450.856 375)) + (attach off) + ) + (padstack RoundRect[T]Pad_975.000000x1400.000000_244.678000_um_0.000000_0 + (shape (polygon F.Cu 0 -488.428 456.25 -469.803 549.884 -416.763 629.263 -337.384 682.303 + -243.75 700.928 243.75 700.928 337.384 682.303 416.763 629.263 + 469.803 549.884 488.428 456.25 488.428 -456.25 469.803 -549.884 + 416.763 -629.263 337.384 -682.303 243.75 -700.928 -243.75 -700.928 + -337.384 -682.303 -416.763 -629.263 -469.803 -549.884 -488.428 -456.25 + -488.428 456.25)) + (attach off) + ) + (padstack RoundRect[T]Pad_1000.000000x1450.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -500.951 475 -481.848 571.035 -427.449 652.449 -346.035 706.848 + -249.999 725.95 250 725.951 346.035 706.848 427.449 652.449 + 481.848 571.035 500.95 474.999 500.951 -475 481.848 -571.035 + 427.449 -652.449 346.035 -706.848 249.999 -725.95 -250 -725.951 + -346.035 -706.848 -427.449 -652.449 -481.848 -571.035 -500.95 -474.999 + -500.951 475)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_BD66147BA5415864FF86D5BB75C674D5 + (shape (polygon F.Cu 0 -500 250 -495.722 315.263 -461.94 441.342 -396.677 554.381 + -304.381 646.677 -191.342 711.94 -65.263 745.722 0 750 500 750 + 500 -750 0 -750 -65.263 -745.722 -191.342 -711.94 -304.381 -646.677 + -396.677 -554.381 -461.94 -441.342 -495.722 -315.263 -500 -250 + -500 250)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_990DCDE6AD7E39367AA0DEC71F4DEF99 + (shape (polygon F.Cu 0 -500 250 -495.722 315.263 -461.94 441.342 -396.677 554.381 + -304.381 646.677 -191.342 711.94 -65.263 745.722 0 750 550 750 + 550 -750 0 -750 -65.263 -745.722 -191.342 -711.94 -304.381 -646.677 + -396.677 -554.381 -461.94 -441.342 -495.722 -315.263 -500 -250 + -500 250)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1000.000000x1500.000000_19_um_86772D42E08000F807F2952CF30D331A + (shape (polygon F.Cu 0 -500 750 0 750 65.263 745.722 191.342 711.94 304.381 646.677 + 396.677 554.381 461.94 441.342 495.722 315.263 500 250 500 -250 + 495.722 -315.263 461.94 -441.342 396.677 -554.381 304.381 -646.677 + 191.342 -711.94 65.263 -745.722 0 -750 -500 -750 -500 750)) + (attach off) + ) + (padstack Cust[T]Pad_1000.000000x500.000000_1050.000000x1500.000000_19_um_8D8E21F0723AC27F1E3DCB4B20CFF501 + (shape (polygon F.Cu 0 -550 750 0 750 65.263 745.722 191.342 711.94 304.381 646.677 + 396.677 554.381 461.94 441.342 495.722 315.263 500 250 500 -250 + 495.722 -315.263 461.94 -441.342 396.677 -554.381 304.381 -646.677 + 191.342 -711.94 65.263 -745.722 0 -750 -550 -750 -550 750)) + (attach off) + ) + (padstack RoundRect[T]Pad_1125.000000x3400.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -563.451 1450 -544.348 1546.04 -489.949 1627.45 -408.535 1681.85 + -312.499 1700.95 312.5 1700.95 408.535 1681.85 489.949 1627.45 + 544.348 1546.04 563.45 1450 563.451 -1450 544.348 -1546.04 + 489.949 -1627.45 408.535 -1681.85 312.499 -1700.95 -312.5 -1700.95 + -408.535 -1681.85 -489.949 -1627.45 -544.348 -1546.04 -563.45 -1450 + -563.451 1450)) + (attach off) + ) + (padstack RoundRect[T]Pad_1125.000000x1750.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -563.451 625 -544.348 721.035 -489.949 802.449 -408.535 856.848 + -312.499 875.95 312.5 875.951 408.535 856.848 489.949 802.449 + 544.348 721.035 563.45 624.999 563.451 -625 544.348 -721.035 + 489.949 -802.449 408.535 -856.848 312.499 -875.95 -312.5 -875.951 + -408.535 -856.848 -489.949 -802.449 -544.348 -721.035 -563.45 -624.999 + -563.451 625)) + (attach off) + ) + (padstack RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -575.951 1100 -556.848 1196.04 -502.449 1277.45 -421.035 1331.85 + -324.999 1350.95 325 1350.95 421.035 1331.85 502.449 1277.45 + 556.848 1196.04 575.95 1100 575.951 -1100 556.848 -1196.04 + 502.449 -1277.45 421.035 -1331.85 324.999 -1350.95 -325 -1350.95 + -421.035 -1331.85 -502.449 -1277.45 -556.848 -1196.04 -575.95 -1100 + -575.951 1100)) + (attach off) + ) + (padstack RoundRect[T]Pad_1475.000000x600.000000_150.571000_um_0.000000_0 + (shape (polygon F.Cu 0 -738.071 150 -726.609 207.621 -693.97 256.47 -645.121 289.109 + -587.499 300.57 587.5 300.571 645.121 289.109 693.97 256.47 + 726.609 207.621 738.07 149.999 738.071 -150 726.609 -207.621 + 693.97 -256.47 645.121 -289.109 587.499 -300.57 -587.5 -300.571 + -645.121 -289.109 -693.97 -256.47 -726.609 -207.621 -738.07 -149.999 + -738.071 150)) + (attach off) + ) + (padstack RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon In1.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon In2.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon B.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (attach off) + ) + (padstack RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 + (shape (polygon F.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon In1.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon In2.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon B.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (attach off) + ) + (padstack RoundRect[T]Pad_1950.000000x600.000000_150.571000_um_0.000000_0 + (shape (polygon F.Cu 0 -975.571 150 -964.109 207.621 -931.47 256.47 -882.621 289.109 + -824.999 300.57 825 300.571 882.621 289.109 931.47 256.47 + 964.109 207.621 975.57 149.999 975.571 -150 964.109 -207.621 + 931.47 -256.47 882.621 -289.109 824.999 -300.57 -825 -300.571 + -882.621 -289.109 -931.47 -256.47 -964.109 -207.621 -975.57 -149.999 + -975.571 150)) + (attach off) + ) + (padstack Rect[A]Pad_2000.000000x2000.000000_um + (shape (rect F.Cu -1000 -1000 1000 1000)) + (shape (rect In1.Cu -1000 -1000 1000 1000)) + (shape (rect In2.Cu -1000 -1000 1000 1000)) + (shape (rect B.Cu -1000 -1000 1000 1000)) + (attach off) + ) + (padstack Rect[T]Pad_2000.000000x3200.000000_um + (shape (rect F.Cu -1000 -1600 1000 1600)) + (attach off) + ) + (padstack Rect[T]Pad_2290.000000x3000.000000_um + (shape (rect F.Cu -1145 -1500 1145 1500)) + (attach off) + ) + (padstack Rect[T]Pad_2650.000000x3650.000000_um + (shape (rect F.Cu -1325 -1825 1325 1825)) + (attach off) + ) + (padstack Rect[T]Pad_500.000000x300.000000_um + (shape (rect F.Cu -250 -150 250 150)) + (attach off) + ) + (padstack Rect[T]Pad_1000.000000x1500.000000_um + (shape (rect F.Cu -500 -750 500 750)) + (attach off) + ) + (padstack Rect[T]Pad_1250.000000x1000.000000_um + (shape (rect F.Cu -625 -500 625 500)) + (attach off) + ) + (padstack Rect[A]Pad_1350.000000x1350.000000_um + (shape (rect F.Cu -675 -675 675 675)) + (shape (rect In1.Cu -675 -675 675 675)) + (shape (rect In2.Cu -675 -675 675 675)) + (shape (rect B.Cu -675 -675 675 675)) + (attach off) + ) + (padstack Rect[A]Pad_1600.000000x1600.000000_um + (shape (rect F.Cu -800 -800 800 800)) + (shape (rect In1.Cu -800 -800 800 800)) + (shape (rect In2.Cu -800 -800 800 800)) + (shape (rect B.Cu -800 -800 800 800)) + (attach off) + ) + (padstack Rect[A]Pad_1700.000000x1700.000000_um + (shape (rect F.Cu -850 -850 850 850)) + (shape (rect In1.Cu -850 -850 850 850)) + (shape (rect In2.Cu -850 -850 850 850)) + (shape (rect B.Cu -850 -850 850 850)) + (attach off) + ) + (padstack "Via[0-3]_600:300_um" + (shape (circle F.Cu 600)) + (shape (circle In1.Cu 600)) + (shape (circle In2.Cu 600)) + (shape (circle B.Cu 600)) + (attach off) + ) + (padstack "Via[0-3]_800:400_um" + (shape (circle F.Cu 800)) + (shape (circle In1.Cu 800)) + (shape (circle In2.Cu 800)) + (shape (circle B.Cu 800)) + (attach off) + ) + ) + (network + (net /GATE_LS + (pins R2-1 Q5-2) + ) + (net /SYS5V + (pins R2-2 J1-20 P11-2 F1-1 K1-2 J2-18 D6-1) + ) + (net /USART1_RX + (pins P13-1 H3-2 K1-1 J2-7 MOD1-23) + ) + (net /DIN_4G + (pins P13-2 J7-3 K1-5 K1-6) + ) + (net GND + (pins P13-3 Rigb-2 Dbk-2 P6-3 Ren2-2 DB2-1 P4-2 P10-2 Ccomp-2 U7-5 DB1-1 J1-19 + Ccomp2-2 C34-2 Rfreq2-2 U3-4 C40-2 J7-4 J7-10 Cu3-2 D10-2 Q5-3 C7-2 P2-2 H3-3 + C35-2 U4-2 U4-4 C9-2 SW4G-2 J8-1 J8-6 J8-10 U2-5 C22-2 R61-2 Rcc1-2 P5-2 DB3-1 + C41-2 Rled-2 JP4-3 Rgs-2 R41-2 DB4-1 Rcc2-2 R6-2 P12-2 C32-2 J9-A1 J9-A12 + J9-B1 J9-B12 J9-SH J9-SH@1 J9-SH@2 J9-SH@3 P1-2 R52-2 J2-19 R56-2 C11-2 C43-2 + U6-5 U6-25 JP3-1 C10-2 SW1-2 SW1-2@1 Rrp-2 Q6-3 C31-2 R21-2 C30-2 C3-2 C33-2 + Rfreq-2 P3-2 C5-2 R8-2 C24-2 R54-2 R50-2 Dbk2-2 Cu4-2 C23-2 JP2-3 D4G-1 MOD1-6 + MOD1-7 MOD1-29) + ) + (net IGN_SENSE + (pins Rigb-1 Rig-2) + ) + (net SW_FAN + (pins Dbk-1 Cbst-2) + ) + (net /5V_FAN + (pins P6-1 D2-1 R20-1 L2-2 JP1-1 C23-1) + ) + (net /FAN_RET + (pins P6-2 D2-2) + ) + (net /FAN_TACH_RAW + (pins P6-4) + ) + (net /EN_FAN + (pins Ren2-1 U2-2 Ren1-2) + ) + (net /BLED2 + (pins DB2-2 RB2-2) + ) + (net /BAT_PLUS + (pins P4-1 R5-1 L6-2 C35-1 U6-23) + ) + (net /NTC + (pins P4-3 R55-2 U6-17) + ) + (net /NRST + (pins P10-1 J1-5 SW1-1 SW1-1@1) + ) + (net CC_FAN + (pins Ccomp-1 Rcomp-2) + ) + (net /SW3_NODE + (pins U7-1 Cbst2-2 Dbk2-1 L7-1) + ) + (net /SW_5V + (pins U7-2 U7-7 C40-1 C3-1 P3-1 MOD1-5) + ) + (net /COMP3 + (pins U7-3 Rcomp2-1) + ) + (net /FB3 + (pins U7-4 R60-2 R61-1) + ) + (net /FREQ3 + (pins U7-6 Rfreq2-1) + ) + (net /BST3 + (pins U7-8 Cbst2-1) + ) + (net /BLED1 + (pins DB1-2 RB1-2) + ) + (net "unconnected-(J1-Pin_1-Pad1)" + (pins J1-1) + ) + (net "unconnected-(J1-Pin_2-Pad2)" + (pins J1-2) + ) + (net "unconnected-(J1-Pin_3-Pad3)" + (pins J1-3) + ) + (net "unconnected-(J1-Pin_4-Pad4)" + (pins J1-4) + ) + (net /BAT_SENSE + (pins J1-6 R5-2 R6-1 C5-1) + ) + (net /PWR_CTRL + (pins J1-7 R1-1) + ) + (net /GNSS_TX + (pins J1-8 P3-3 MOD1-16) + ) + (net /GNSS_RX + (pins J1-9 P3-4 MOD1-15) + ) + (net /5V_SENSE + (pins J1-10 C7-1 R7-2 R8-1) + ) + (net /IGN_SENSE + (pins J1-11 C9-1 D5-2) + ) + (net /FAN_PWM + (pins J1-12) + ) + (net "unconnected-(J1-Pin_13-Pad13)" + (pins J1-13) + ) + (net /EXT_LED + (pins J1-14) + ) + (net /NTC_TEMP + (pins J1-15 P12-1 R42-2 C24-1) + ) + (net "unconnected-(J1-Pin_16-Pad16)" + (pins J1-16) + ) + (net /FAN_TACH + (pins J1-17) + ) + (net /3V3 + (pins J1-18 R31-1 U3-3 Cu3-1 R3-1 U4-5 P5-1 R30-1 J2-20 R42-1 R58-1 D5-1 R57-1 + Cu4-1 MOD1-2) + ) + (net /COMP3_C + (pins Ccomp2-1 Rcomp2-2) + ) + (net /MAIN5V + (pins P11-1 Q7-1 Q7-2 Q7-3 C34-1 JP4-1 C32-1 U6-1 U6-24 JP3-3 R53-1 C33-1 JP2-1) + ) + (net FAN_PWM + (pins Rg-1) + ) + (net FAN_GATE + (pins Rg-2 Rgs-1) + ) + (net /IGATE + (pins Q7-4 U6-15) + ) + (net /VIN_SW + (pins Q7-5 Q7-6 Q7-7 Q7-8 RS1-2 U6-7) + ) + (net /I2C_SDA + (pins R31-2 U3-1 U4-6 P5-3 J2-15) + ) + (net /MODEM_LED + (pins Rmled-1 J8-8) + ) + (net /MODEM_LED_A + (pins Rmled-2 D4G-2) + ) + (net /I2C_SCL + (pins U3-2 U4-1 P5-4 R30-2 J2-14) + ) + (net /3V3_MODEM + (pins J7-1 R60-1 J8-7 C41-1 C43-1 L7-2) + ) + (net /DOUT_4G + (pins J7-2 MOD1-17) + ) + (net /MODEM_RST + (pins J7-5 SW4G-1) + ) + (net /USB_VBUS + (pins J7-6 J9-A4 J9-A9 J9-B4 J9-B9) + ) + (net /USB_DP + (pins J7-7 J9-A6 J9-B6) + ) + (net /USB_DM + (pins J7-8 J9-A7 J9-B7) + ) + (net "unconnected-(J7-Pin_9-Pad9)" + (pins J7-9) + ) + (net /VEH5V + (pins RS1-1 P2-1 R55-1 JP1-2 U6-6 U6-16 R51-1 C31-1 C30-1 R7-1) + ) + (net /LED_A + (pins R3-2 P8-1 D1-2) + ) + (net USART1_RX + (pins Rdfu-1) + ) + (net 3V3 + (pins Rdfu-2 Rtp-1) + ) + (net /24V_IN + (pins D10-1 P1-1) + ) + (net COMP_FAN + (pins Rcomp-1) + ) + (net /BASE_LS + (pins Q5-1 R1-2) + ) + (net /FB_FAN + (pins R20-2 U2-4 R21-1) + ) + (net FAN_TACH_RAW + (pins Rts-1) + ) + (net FAN_TACH + (pins Rts-2 Rtp-2) + ) + (net BST_FAN + (pins Cbst-1) + ) + (net /USART1_TX + (pins H3-1 K1-10 J2-6) + ) + (net /SW_BAT + (pins L6-1 U6-21 U6-22) + ) + (net "unconnected-(U4-ALERT-Pad3)" + (pins U4-3) + ) + (net /BATLED3 + (pins RB3-1 J2-3) + ) + (net /BLED3 + (pins RB3-2 DB3-2) + ) + (net /CLPROG_TP + (pins TP1-1 U6-3) + ) + (net /SW_FAN + (pins L2-1 U2-1) + ) + (net "unconnected-(J8-Pin_2-Pad2)" + (pins J8-2) + ) + (net "unconnected-(J8-Pin_3-Pad3)" + (pins J8-3) + ) + (net "unconnected-(J8-Pin_4-Pad4)" + (pins J8-4) + ) + (net "unconnected-(J8-Pin_5-Pad5)" + (pins J8-5) + ) + (net "unconnected-(J8-Pin_9-Pad9)" + (pins J8-9) + ) + (net /COMP_FAN + (pins U2-3) + ) + (net /FREQ_FAN + (pins U2-6) + ) + (net /24V + (pins U2-7 C22-1 C11-1 C10-1 Ren1-1) + ) + (net /BST_FAN + (pins U2-8) + ) + (net /BATLED4 + (pins RB4-1 J2-4) + ) + (net /BLED4 + (pins RB4-2 DB4-2) + ) + (net /USB_CC1 + (pins Rcc1-1 J9-A5) + ) + (net EXT_LED + (pins Rled-1) + ) + (net /F0_SEL + (pins JP4-2 U6-14) + ) + (net /LED_K + (pins P8-2 D1-1) + ) + (net /Q6_BASE + (pins R41-1 R40-2 Q6-1) + ) + (net /BATLED2 + (pins RB2-1 J2-2) + ) + (net /USB_CC2 + (pins Rcc2-1 J9-B5) + ) + (net /IGN_IN + (pins P1-3) + ) + (net "unconnected-(P1-Pin_4-Pad4)" + (pins P1-4) + ) + (net "unconnected-(P1-Pin_5-Pad5)" + (pins P1-5) + ) + (net /SW_IN + (pins F1-2) + ) + (net /PFI + (pins R52-1 U6-19 R51-2) + ) + (net /KCOIL + (pins K1-9 Q6-2 D6-2) + ) + (net /BATLED1 + (pins J2-1 RB1-1) + ) + (net /CHRG_EN + (pins J2-5 R56-1 U6-4) + ) + (net "unconnected-(J2-Pin_8-Pad8)" + (pins J2-8) + ) + (net "unconnected-(J2-Pin_9-Pad9)" + (pins J2-9) + ) + (net "unconnected-(J2-Pin_10-Pad10)" + (pins J2-10) + ) + (net /CHRG_STAT + (pins J2-11 U6-8 R57-2) + ) + (net /CHRG_FAULT + (pins J2-12 U6-9 R58-2) + ) + (net /BYP_CTRL + (pins J2-13 R40-1) + ) + (net "unconnected-(J2-Pin_16-Pad16)" + (pins J2-16) + ) + (net "unconnected-(J2-Pin_17-Pad17)" + (pins J2-17) + ) + (net Q10_GATE + (pins DzG-1 Rrp-1) + ) + (net 24V + (pins DzG-3) + ) + (net /PROG + (pins U6-2 R50-1) + ) + (net /VFB_BST + (pins U6-10 U6-18 R53-2 R54-1) + ) + (net "unconnected-(U6-RST-Pad11)" + (pins U6-11) + ) + (net /F2_SEL + (pins U6-12 JP2-2) + ) + (net /F1_SEL + (pins U6-13 JP3-2) + ) + (net /PFO_TP + (pins U6-20 TP2-1) + ) + (net FREQ_FAN + (pins Rfreq-1) + ) + (net IGN_IN + (pins Rig-1) + ) + (net "unconnected-(MOD1-NC-Pad1)" + (pins MOD1-1) + ) + (net "unconnected-(MOD1-RESET-Pad3)" + (pins MOD1-3) + ) + (net "unconnected-(MOD1-3V3_OUT-Pad4)" + (pins MOD1-4) + ) + (net "unconnected-(MOD1-VIN-Pad8)" + (pins MOD1-8) + ) + (net "unconnected-(MOD1-A0-Pad9)" + (pins MOD1-9) + ) + (net "unconnected-(MOD1-A1-Pad10)" + (pins MOD1-10) + ) + (net "unconnected-(MOD1-A2-Pad11)" + (pins MOD1-11) + ) + (net "unconnected-(MOD1-A3-Pad12)" + (pins MOD1-12) + ) + (net "unconnected-(MOD1-A4-Pad13)" + (pins MOD1-13) + ) + (net "unconnected-(MOD1-A5-Pad14)" + (pins MOD1-14) + ) + (net "unconnected-(MOD1-D3-Pad18)" + (pins MOD1-18) + ) + (net "unconnected-(MOD1-D4-Pad19)" + (pins MOD1-19) + ) + (net "unconnected-(MOD1-D5-Pad20)" + (pins MOD1-20) + ) + (net "unconnected-(MOD1-D6-Pad21)" + (pins MOD1-21) + ) + (net "unconnected-(MOD1-D7-Pad22)" + (pins MOD1-22) + ) + (net "unconnected-(MOD1-D9-Pad24)" + (pins MOD1-24) + ) + (net "unconnected-(MOD1-D10-Pad25)" + (pins MOD1-25) + ) + (net "unconnected-(MOD1-FENCE_D11-Pad26)" + (pins MOD1-26) + ) + (net "unconnected-(MOD1-EXTINT_D12-Pad27)" + (pins MOD1-27) + ) + (net "unconnected-(MOD1-TPS_D13-Pad28)" + (pins MOD1-28) + ) + (net "unconnected-(MOD1-AREF-Pad30)" + (pins MOD1-30) + ) + (net "unconnected-(MOD1-SDA-Pad31)" + (pins MOD1-31) + ) + (net "unconnected-(MOD1-SCL-Pad32)" + (pins MOD1-32) + ) + (class kicad_default /24V /24V_IN /3V3 /3V3_MODEM /5V_FAN /5V_SENSE /BASE_LS + /BATLED1 /BATLED2 /BATLED3 /BATLED4 /BAT_PLUS /BAT_SENSE /BLED1 /BLED2 + /BLED3 /BLED4 /BST3 /BST_FAN /BYP_CTRL /CHRG_EN /CHRG_FAULT /CHRG_STAT + /CLPROG_TP /COMP3 /COMP3_C /COMP_FAN /DIN_4G /DOUT_4G /EN_FAN /EXT_LED + /F0_SEL /F1_SEL /F2_SEL /FAN_PWM /FAN_RET /FAN_TACH /FAN_TACH_RAW /FB3 + /FB_FAN /FREQ3 /FREQ_FAN /GATE_LS /GNSS_RX /GNSS_TX /I2C_SCL /I2C_SDA + /IGATE /IGN_IN /IGN_SENSE /KCOIL /LED_A /LED_K /MAIN5V /MODEM_LED /MODEM_LED_A + /MODEM_RST /NRST /NTC /NTC_TEMP /PFI /PFO_TP /PROG /PWR_CTRL /Q6_BASE + /SW3_NODE /SW_5V /SW_BAT /SW_FAN /SW_IN /SYS5V /USART1_RX /USART1_TX + /USB_CC1 /USB_CC2 /USB_DM /USB_DP /USB_VBUS /VEH5V /VFB_BST /VIN_SW + 24V 3V3 BST_FAN CC_FAN COMP_FAN EXT_LED FAN_GATE FAN_PWM FAN_TACH FAN_TACH_RAW + FREQ_FAN GND IGN_IN IGN_SENSE Q10_GATE SW_FAN USART1_RX "unconnected-(J1-Pin_1-Pad1)" + "unconnected-(J1-Pin_13-Pad13)" "unconnected-(J1-Pin_16-Pad16)" "unconnected-(J1-Pin_2-Pad2)" + "unconnected-(J1-Pin_3-Pad3)" "unconnected-(J1-Pin_4-Pad4)" "unconnected-(J2-Pin_10-Pad10)" + "unconnected-(J2-Pin_16-Pad16)" "unconnected-(J2-Pin_17-Pad17)" "unconnected-(J2-Pin_8-Pad8)" + "unconnected-(J2-Pin_9-Pad9)" "unconnected-(J7-Pin_9-Pad9)" "unconnected-(J8-Pin_2-Pad2)" + "unconnected-(J8-Pin_3-Pad3)" "unconnected-(J8-Pin_4-Pad4)" "unconnected-(J8-Pin_5-Pad5)" + "unconnected-(J8-Pin_9-Pad9)" "unconnected-(MOD1-3V3_OUT-Pad4)" "unconnected-(MOD1-A0-Pad9)" + "unconnected-(MOD1-A1-Pad10)" "unconnected-(MOD1-A2-Pad11)" "unconnected-(MOD1-A3-Pad12)" + "unconnected-(MOD1-A4-Pad13)" "unconnected-(MOD1-A5-Pad14)" "unconnected-(MOD1-AREF-Pad30)" + "unconnected-(MOD1-D10-Pad25)" "unconnected-(MOD1-D3-Pad18)" "unconnected-(MOD1-D4-Pad19)" + "unconnected-(MOD1-D5-Pad20)" "unconnected-(MOD1-D6-Pad21)" "unconnected-(MOD1-D7-Pad22)" + "unconnected-(MOD1-D9-Pad24)" "unconnected-(MOD1-EXTINT_D12-Pad27)" + "unconnected-(MOD1-FENCE_D11-Pad26)" "unconnected-(MOD1-NC-Pad1)" "unconnected-(MOD1-RESET-Pad3)" + "unconnected-(MOD1-SCL-Pad32)" "unconnected-(MOD1-SDA-Pad31)" "unconnected-(MOD1-TPS_D13-Pad28)" + "unconnected-(MOD1-VIN-Pad8)" "unconnected-(P1-Pin_4-Pad4)" "unconnected-(P1-Pin_5-Pad5)" + "unconnected-(U4-ALERT-Pad3)" "unconnected-(U6-RST-Pad11)" + (circuit + (use_via "Via[0-3]_600:300_um") + ) + (rule + (width 200) + (clearance 200) + ) + ) + ) + (wiring + (wire (path F.Cu 1500 155452 -56185.8 155452 -56323.1)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 168192 -59323.1 169648 -57867)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 188746 -57867 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 169648 -57867 188746 -57867)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 145054 -46323.1 151533 -52802.2 152068 -52802.2 155452 -56185.8)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 194265 -63386.8 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 201342 -61823.1 199778 -63386.8)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 138292 -46323.1 145054 -46323.1)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 199778 -63386.8 194265 -63386.8)(net /SYS5V)(type route)) + (wire (path B.Cu 1500 157534 -58405.6 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path B.Cu 1500 155452 -56323.1 157534 -58405.6)(net /SYS5V)(type route)) + (wire (path In2.Cu 1500 150372 -74103.1 150372 -64033.5 155452 -58953.5 155452 -56323.1)(net /SYS5V)(type route)) + (wire (path B.Cu 200 163333 -77836.4 173205 -77836.4 174192 -78823.1)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 126209 -53120.5 138642 -53120.5)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 141482 -56716.8 144349 -59584)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 141482 -55960.4 141482 -56716.8)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 119843 -46323.1 119843 -46755)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 138642 -53120.5 141482 -55960.4)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 119843 -46755 126209 -53120.5)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 144349 -59584 158919 -59584 160281 -60946)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 118692 -46323.1 119843 -46323.1)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 176487 -78823.1 189284 -66025.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 174192 -78823.1 176487 -78823.1)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 160281 -60946 160281 -74783.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 194364 -66025.6 189284 -66025.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 160281 -74783.6 163333 -77836.4)(net /DIN_4G)(type route)) + (wire (path F.Cu 200 196542 -84823.1 199123 -84823.1)(net GND)(type route)) + (wire (path F.Cu 200 199100 -92850 199073 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 129479 -118323 128262 -118323)(net GND)(type route)) + (wire (path F.Cu 200 198042 -61823.1 197782 -61823.1)(net GND)(type route)) + (wire (path F.Cu 200 196542 -92823.1 199073 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 137742 -112373 137692 -112323)(net GND)(type route)) + (wire (path F.Cu 200 121742 -94323.1 121242 -94823.1)(net GND)(type route)) + (wire (path F.Cu 200 137742 -113983 137742 -112373)(net GND)(type route)) + (wire (path F.Cu 200 172327 -92823.1 172300 -92850)(net GND)(type route)) + (wire (path F.Cu 1000 100542 -74323.1 99291.6 -74323.1)(net GND)(type route)) + (wire (path F.Cu 200 124892 -117923 125862 -117923 126002 -118063)(net GND)(type route)) + (wire (path F.Cu 200 172800 -80800 172823 -80823.1)(net GND)(type route)) + (wire (path F.Cu 200 132902 -118823 137742 -113983)(net GND)(type route)) + (wire (path F.Cu 200 154815 -63373.1 154882 -63306.3)(net GND)(type route)) + (wire (path F.Cu 200 184129 -63323.1 184506 -62946.4)(net GND)(type route)) + (wire (path F.Cu 200 199123 -84823.1 199150 -84850)(net GND)(type route)) + (wire (path F.Cu 200 152367 -64323.1 147692 -64323.1)(net GND)(type route)) + (wire (path F.Cu 200 121242 -94823.1 119792 -94823.1)(net GND)(type route)) + (wire (path F.Cu 200 153317 -63373.1 152367 -64323.1)(net GND)(type route)) + (wire (path F.Cu 200 166542 -59323.1 165740 -58521.1)(net GND)(type route)) + (wire (path F.Cu 200 184506 -62946.4 187990 -62946.4)(net GND)(type route)) + (wire (path F.Cu 200 161855 -58521.1 160694 -59682.2)(net GND)(type route)) + (wire (path F.Cu 200 126002 -118063 128002 -118063)(net GND)(type route)) + (wire (path F.Cu 200 174192 -92823.1 172327 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 165740 -58521.1 161855 -58521.1)(net GND)(type route)) + (wire (path F.Cu 200 128002 -118063 128262 -118323)(net GND)(type route)) + (wire (path F.Cu 200 153317 -63373.1 154815 -63373.1)(net GND)(type route)) + (wire (path F.Cu 200 130904 -118823 132902 -118823)(net GND)(type route)) + (wire (path F.Cu 200 174192 -80823.1 172823 -80823.1)(net GND)(type route)) + (wire (path F.Cu 200 197782 -61823.1 194364 -58405.6)(net GND)(type route)) + (wire (path In2.Cu 200 155615 -62572.8 157803 -62572.8)(net GND)(type route)) + (wire (path In2.Cu 200 194364 -58405.6 192531 -58405.6)(net GND)(type route)) + (wire (path In2.Cu 200 157803 -62572.8 160694 -59682.2)(net GND)(type route)) + (wire (path In2.Cu 200 192531 -58405.6 187990 -62946.4)(net GND)(type route)) + (wire (path In2.Cu 200 154882 -63306.3 155615 -62572.8)(net GND)(type route)) + (wire (path F.Cu 200 120490 -67486.2 102379 -67486.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100542 -72860.5 100542 -69323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102379 -67486.2 100542 -69323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 97851.6 -82803.1 97446.6 -83208.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 98258.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 96956.6 -83208.1 96841.6 -83323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 97446.6 -83208.1 96956.6 -83208.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 102192 -74323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 100542 -72860.5)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100817 -83872.7 100361 -84328.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 98258.1 -78069.3 98158.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100817 -83323.1 100817 -83872.7)(net IGN_SENSE)(type route)) + (wire (path B.Cu 200 121429 -67486.2 120490 -67486.2)(net IGN_SENSE)(type route)) + (wire (path B.Cu 200 132592 -56323.1 121429 -67486.2)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97853.1 -78374.4 98158.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97853.1 -82801.7 97853.1 -78374.4)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -82803.1 97851.6 -83206.7)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -82803.1 97853.1 -82801.7)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -83206.7 98973.1 -84328.2 100361 -84328.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 1000 171692 -54799 171692 -54633.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -47823.1 183392 -49214.2 183392 -49005.2)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170877 -54799 171692 -54799)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 172322 -55429.6 171692 -54799)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170397 -44118.2 169192 -45323.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -49005.2 178505 -44118.2 170397 -44118.2)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -49214.2 182627 -49978.6 182627 -51369.7 178567 -55429.6)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 168192 -63823.1 166684 -63823.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 178567 -55429.6 172322 -55429.6)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170313 -55362.6 170877 -54799)(net SW_FAN)(type route)) + (wire (path In2.Cu 1000 170313 -55362.6 170313 -60194.3 166684 -63823.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 95479.9 -85145.6 95479.9 -82751.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 98837.1 -79472.8 99038.8 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 170298 -73436 198579 -73436)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 174274 -46687.7 176504 -46687.7)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 198579 -73436 210192 -61823.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -80323.1 164892 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 92191.6 -88433.9 95479.9 -85145.6)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 99038.8 -79271.1 164892 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -78842.6 170298 -73436)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 179603 -49835.2 178792 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 191192 -47823.1 191192 -49391.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 178792 -49835.2 178792 -51223.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 191192 -49391.1 190531 -50051.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -79271.1 164892 -78842.6)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 176504 -46687.7 178792 -48974.9 178792 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 95479.9 -82751.9 98759.1 -79472.8 98837.1 -79472.8)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 173042 -45455.8 174274 -46687.7)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 92191.6 -98323.1 92191.6 -88433.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 173042 -45323.1 173042 -45455.8)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 190531 -50052 190531 -50051.9)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 198421 -50052 190531 -50052)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 210192 -61823.1 198421 -50052)(net /5V_FAN)(type route)) + (wire (path In2.Cu 1000 190314 -49835.2 179603 -49835.2)(net /5V_FAN)(type route)) + (wire (path In2.Cu 1000 190531 -50051.9 190314 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 98084.2 -100216 102590 -100216)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 107183 -96377.2 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 107129 -96323.1 107183 -96377.2)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 96191.6 -98323.1 98084.2 -100216)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 138289 -93500 138077 -93287.7)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122351 -93362 115854 -93362)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 126177 -93500 125896 -93219.3)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 129723 -93500 126177 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 111851 -93200.5 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 130862 -93809.4 130032 -93809.4)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122515 -93219.3 122362 -93373.1)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 154715 -93359.8 154575 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 135761 -93288.9 131382 -93288.9)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 138077 -93287.7 135762 -93287.7)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 115693 -93200.5 111851 -93200.5)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 135762 -93287.7 135761 -93288.9)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122362 -93373.1 122351 -93362)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 125896 -93219.3 122515 -93219.3)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 115854 -93362 115693 -93200.5)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 130032 -93809.4 129723 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 154575 -93500 138289 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 131382 -93288.9 130862 -93809.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 108674 -96482.3 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 169143 -78932.1 154715 -93359.8)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 196064 -60271.9 192081 -60271.9 188028 -64325.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 182347 -64325.4 169143 -77529.2)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 197013 -59323.1 196064 -60271.9)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 188028 -64325.4 182347 -64325.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 102590 -100216 104941 -100216)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 169143 -77529.2 169143 -78932.1)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 210192 -59323.1 197013 -59323.1)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 104941 -100216 108674 -96482.3)(net /FAN_RET)(type route)) + (wire (path F.Cu 200 175017 -59323.1 175017 -59560.9)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 177367 -59323.1 175017 -59323.1)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 173407 -53346.3 171708 -53346.3)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 175017 -59560.9 174361 -60216.8)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 171708 -53346.3 171692 -53363.1)(net /EN_FAN)(type route)) + (wire (path In2.Cu 200 173407 -59262.7 173407 -53346.3)(net /EN_FAN)(type route)) + (wire (path In2.Cu 200 174361 -60216.8 173407 -59262.7)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 199079 -44435.6 199079 -48323.1)(net /BLED2)(type route)) + (wire (path F.Cu 200 199192 -44323.1 199079 -44435.6)(net /BLED2)(type route)) + (wire (path F.Cu 1500 119022 -107288 116832 -109478)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 120309 -100012 126502 -100012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 121092 -90453.1 121242 -90603.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119022 -107288 119151 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129242 -97272.5 129242 -96323.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129891 -89262.7 129892 -89263.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126861 -89262.7 129891 -89262.7)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 120542 -89873.1 121092 -90423.1 121092 -90453.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 210192 -108323 210019 -108323)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119542 -89873.1 120542 -89873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119382 -89423.1 119382 -89713.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -95993.1 143252 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119151 -107416 154762 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 173543 -104510 173543 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -107416 167047 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126502 -100012 129242 -97272.5)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 91715.6 -111012 91935.6 -111012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 167047 -107416 169640 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 172568 -104823 173543 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 171592 -104823 169640 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -107416 154762 -95993.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 117448 -102873 120309 -100012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 801.4 91715.6 -112024 91416.6 -112323)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129892 -89263.1 134672 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 177187 -100866 173543 -104510)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 210019 -108323 202561 -100866)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119022 -107288 117448 -105714 117448 -102873)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 93354.2 -109593 93354.2 -109585)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 91935.6 -111012 93354.2 -109593)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 801.4 91715.6 -111012 91715.6 -112024)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 121242 -90603.1 121242 -91873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119382 -89713.1 119542 -89873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 202561 -100866 177187 -100866)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126822 -89223.1 126861 -89262.7)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 172568 -104823 171592 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 134672 -84483.1 143252 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119492 -89423.1 119612 -89303.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 124472 -92033.1 125532 -90973.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1000 126822 -89223.1 126752 -89223.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119382 -89423.1 119492 -89423.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1500 116832 -109478 93460.6 -109478)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 124472 -92083.1 124472 -92033.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119612 -89303.1 120872 -89303.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1500 93460.6 -109478 93354.2 -109585)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 123652 -92083.1 124472 -92083.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1000 126752 -89223.1 126702 -89272.7)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 125532 -90973.1 125532 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 750 125542 -90433.1 125532 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 126702 -89272.7 125542 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 120872 -89303.1 123652 -92083.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 104619 -105396 115743 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 124343 -93823.1 123692 -93823.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125472 -94023.1 125281 -94023.1)(net /NTC)(type route)) + (wire (path F.Cu 200 124443 -93723.1 124343 -93823.1)(net /NTC)(type route)) + (wire (path F.Cu 200 102692 -107323 104619 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 124981 -93723.1 124443 -93723.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125281 -94023.1 124981 -93723.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125492 -94043.1 125472 -94023.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125532 -94123.1 125492 -94083.1 125492 -94043.1)(net /NTC)(type route)) + (wire (path B.Cu 200 128135 -94457.5 129547 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 126120 -94245 127923 -94245)(net /NTC)(type route)) + (wire (path B.Cu 200 137259 -94090.6 137746 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 202478 -94457.5 210192 -102171)(net /NTC)(type route)) + (wire (path B.Cu 200 127923 -94245 128135 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 137258 -94089.4 137259 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 136093 -94090.6 136094 -94089.4)(net /NTC)(type route)) + (wire (path B.Cu 200 125702 -94253.1 125712 -94263.1 126102 -94263.1)(net /NTC)(type route)) + (wire (path B.Cu 200 129547 -94457.5 129700 -94611.1 131194 -94611.1)(net /NTC)(type route)) + (wire (path B.Cu 200 125532 -94123.1 125662 -94253.1)(net /NTC)(type route)) + (wire (path B.Cu 200 137746 -94090.6 138113 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 136094 -94089.4 137258 -94089.4)(net /NTC)(type route)) + (wire (path B.Cu 200 210192 -102171 210192 -103323)(net /NTC)(type route)) + (wire (path B.Cu 200 131194 -94611.1 131714 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 125662 -94253.1 125702 -94253.1)(net /NTC)(type route)) + (wire (path B.Cu 200 131714 -94090.6 136093 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 126102 -94263.1 126120 -94245)(net /NTC)(type route)) + (wire (path B.Cu 200 138113 -94457.5 202478 -94457.5)(net /NTC)(type route)) + (wire (path In2.Cu 200 116719 -105396 125772 -96343.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 125772 -94363.1 125532 -94123.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 125772 -96343.1 125772 -94363.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 115743 -105396 116719 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 117352 -56323.1 118503 -57474.8 124193 -57474.8)(net /NRST)(type route)) + (wire (path B.Cu 200 199192 -133323 205692 -133323)(net /NRST)(type route)) + (wire (path In2.Cu 200 210167 -80073.1 205692 -84548.1)(net /NRST)(type route)) + (wire (path In2.Cu 200 144462 -89823.7 184842 -130204)(net /NRST)(type route)) + (wire (path In2.Cu 200 141482 -73733.8 141482 -76531.3)(net /NRST)(type route)) + (wire (path In2.Cu 200 205692 -84548.1 205692 -133323)(net /NRST)(type route)) + (wire (path In2.Cu 200 184842 -130204 196072 -130204)(net /NRST)(type route)) + (wire (path In2.Cu 200 125223 -57474.8 141482 -73733.8)(net /NRST)(type route)) + (wire (path In2.Cu 200 141482 -76531.3 144462 -79511.3 144462 -89823.7)(net /NRST)(type route)) + (wire (path In2.Cu 200 124193 -57474.8 125223 -57474.8)(net /NRST)(type route)) + (wire (path In2.Cu 200 196072 -130204 199192 -133323)(net /NRST)(type route)) + (wire (path F.Cu 200 175842 -49448.1 175842 -52698.1)(net CC_FAN)(type route)) + (wire (path F.Cu 1000 185607 -115685 184346 -115685)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 187097 -116027 185949 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 163792 -118323 165493 -118323)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 200097 -114478 198548 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 188692 -107616 188692 -109823)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 183752 -115091 168726 -115091)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 186492 -103823 188692 -106023)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 185949 -116027 185607 -115685)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 168726 -115091 165493 -118323)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 198548 -116027 187097 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 184346 -115685 183752 -115091)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 188692 -106023 188692 -107616)(net /SW3_NODE)(type route)) + (wire (path In2.Cu 1000 187097 -109211 188692 -107616)(net /SW3_NODE)(type route)) + (wire (path In2.Cu 1000 187097 -116027 187097 -109211)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 171223 -113084 141911 -113084)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 200097 -113208 202137 -113208)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 157045 -62479.4 156118 -63406.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 157045 -53576.6 157045 -62479.4)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 155281 -64323.1 156118 -63486.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 171617 -113477 193556 -113477)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 174078 -95373.1 171760 -97690.9)(net /SW_5V)(type route)) + (wire (path F.Cu 601 194877 -113477 195147 -113208)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 210192 -95323.1 179742 -95323.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 154692 -51223.1 157045 -53576.6)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 202137 -113208 202152 -113193)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 155192 -64323.1 155281 -64323.1)(net /SW_5V)(type route)) + (wire (path F.Cu 601 193556 -113477 194877 -113477)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 141911 -113084 125412 -129583)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 179742 -95323.1 179692 -95373.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 171617 -113477 171223 -113084)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 179692 -95373.1 174078 -95373.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 156118 -63486.1 156118 -63406.1)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 196852 -118493 176633 -118493)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 202152 -113193 196852 -118493)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 176633 -118493 171617 -113477)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 167171 -102280 171760 -97690.9)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 156118 -63406.1 157010 -64297.8 157010 -87333.1)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 167171 -109032 167171 -102280)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 153505 -90838.3 153505 -93892)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 157010 -87333.1 153505 -90838.3)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 171617 -113477 167171 -109032)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 153505 -93892 161893 -102280 167171 -102280)(net /SW_5V)(type route)) + (wire (path F.Cu 200 203712 -111938 200097 -111938)(net /COMP3)(type route)) + (wire (path F.Cu 200 179937 -117393 200252 -117393)(net /COMP3)(type route)) + (wire (path F.Cu 200 178867 -116323 179937 -117393)(net /COMP3)(type route)) + (wire (path F.Cu 200 200252 -117393 203712 -113933 203712 -111938)(net /COMP3)(type route)) + (wire (path F.Cu 200 180867 -109498 181474 -109498)(net /FB3)(type route)) + (wire (path F.Cu 200 200097 -110668 197015 -110668)(net /FB3)(type route)) + (wire (path F.Cu 200 178692 -107323 180867 -109498)(net /FB3)(type route)) + (wire (path F.Cu 200 197015 -110668 196891 -110544)(net /FB3)(type route)) + (wire (path F.Cu 200 180342 -102323 188670 -102323)(net /FB3)(type route)) + (wire (path In2.Cu 200 196891 -110544 188670 -102323)(net /FB3)(type route)) + (wire (path In2.Cu 200 181474 -109498 188650 -102323 188670 -102323)(net /FB3)(type route)) + (wire (path F.Cu 200 195147 -111938 194484 -112601 179469 -112601 178692 -111823)(net /FREQ3)(type route)) + (wire (path F.Cu 200 192976 -114752 194873 -114752 195147 -114478)(net /BST3)(type route)) + (wire (path F.Cu 200 187142 -109823 187142 -107718)(net /BST3)(type route)) + (wire (path In2.Cu 200 189077 -106797 192976 -110696)(net /BST3)(type route)) + (wire (path In2.Cu 200 188062 -106797 189077 -106797)(net /BST3)(type route)) + (wire (path In2.Cu 200 192976 -110696 192976 -114752)(net /BST3)(type route)) + (wire (path In2.Cu 200 187142 -107718 188062 -106797)(net /BST3)(type route)) + (wire (path F.Cu 200 195079 -44435.6 195079 -48323.1)(net /BLED1)(type route)) + (wire (path F.Cu 200 195192 -44323.1 195079 -44435.6)(net /BLED1)(type route)) + (wire (path F.Cu 200 94447.1 -110943 94447.1 -109167)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 91416.6 -116323 93066.6 -114673)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93779.8 -108499 92677.9 -108499)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -112323 94447.1 -110943)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 94447.1 -109167 93779.8 -108499)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 92677.9 -108499 92096.6 -109080)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 97108.9 -113131 97916.6 -112323)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -113131 93066.6 -112323)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -114673 93066.6 -113131 97108.9 -113131)(net /BAT_SENSE)(type route)) + (wire (path B.Cu 200 92198.6 -67700.9 108514 -67700.9 119892 -56323.1)(net /BAT_SENSE)(type route)) + (wire (path In2.Cu 200 90491.4 -107475 92096.6 -109080)(net /BAT_SENSE)(type route)) + (wire (path In2.Cu 200 92198.6 -67700.9 90491.4 -69408.1 90491.4 -107475)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 163042 -59323.1 163042 -60171.8 161642 -61571.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 122432 -56323.1 123607 -55147.7)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 136402 -55959.1 136402 -56716.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 141635 -61949.4 161264 -61949.4)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 135590 -55147.7 136402 -55959.1)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 161264 -61949.4 161642 -61571.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 136402 -56716.2 141635 -61949.4)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 123607 -55147.7 135590 -55147.7)(net /PWR_CTRL)(type route)) + (wire (path F.Cu 200 149373 -81460.8 155736 -87823.1 207692 -87823.1)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 149373 -81323.1 149373 -81460.8)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 209040 -89171.4 210192 -89171.4)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 210192 -90323.1 210192 -89171.4)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 148272 -81323.1 149373 -81323.1)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 207692 -87823.1 209040 -89171.4)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 133931 -65282.9 124972 -56323.1)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 135598 -65282.9 133931 -65282.9)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 144022 -75971.4 144022 -73706.3)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 148272 -81323.1 148272 -80221.4 144022 -75971.4)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 144022 -73706.3 135598 -65282.9)(net /GNSS_TX)(type route)) + (wire (path B.Cu 200 158413 -87823.1 151913 -81323.1)(net /GNSS_RX)(type route)) + (wire (path B.Cu 200 210192 -87823.1 158413 -87823.1)(net /GNSS_RX)(type route)) + (wire (path B.Cu 200 150812 -81323.1 151913 -81323.1)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 146562 -73708 146562 -75971.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 134709 -61855.3 146562 -73708)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 127512 -56323.1 133044 -61855.3)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 146562 -75971.4 150812 -80221.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 150812 -81323.1 150812 -80221.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 133044 -61855.3 134709 -61855.3)(net /GNSS_RX)(type route)) + (wire (path F.Cu 200 95416.6 -116323 98324.8 -113415)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 106092 -112323 106832 -111583)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 106092 -112323 103742 -112323)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 102650 -113415 103742 -112323)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 98324.8 -113415 102650 -113415)(net /5V_SENSE)(type route)) + (wire (path B.Cu 200 130052 -56323.1 115962 -70412.6 94238.2 -70412.6)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 94238.2 -70412.6 92764.9 -71886 92764.9 -97592.9)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 106755 -111583 106832 -111583)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 92764.9 -97592.9 106755 -111583)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 115742 -112323 118142 -112323 121716 -108749 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path B.Cu 200 210192 -121323 176973 -121323 169737 -114087)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152455 -95314.8 152455 -97248.9)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152807 -97601.5 153252 -97601.5)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 142752 -56323.1 142752 -67123.1)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152455 -97248.9 152807 -97601.5)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 142752 -67123.1 149102 -73473.1 149102 -75898.1 152177 -78973.9)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 169737 -114087 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152177 -78973.9 152177 -95037.4 152455 -95314.8)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 153252 -97601.5 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path F.Cu 200 187004 -114635 187192 -114823)(net /COMP3_C)(type route)) + (wire (path F.Cu 200 185252 -114635 187004 -114635)(net /COMP3_C)(type route)) + (wire (path F.Cu 200 180517 -116323 180985 -116791 185103 -116791)(net /COMP3_C)(type route)) + (wire (path In2.Cu 200 185252 -114635 185103 -114784 185103 -116791)(net /COMP3_C)(type route)) + (wire (path F.Cu 1500 130042 -103378 130042 -104323)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139938 -98598.2 142011 -96525)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 121305 -101985 124692 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119466 -91546.2 118024 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -91323.1 134042 -90777.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139819 -99823.1 139938 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 138622 -101293 132642 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 115034 -91546.2 112720 -89232.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 142692 -96525 142692 -94823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 601 112082 -87882.3 110261 -87882.3)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110242 -87863.1 110242 -86593.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -101293 132642 -92722.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139546 -100369 139819 -100096)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -90777.2 134951 -89867.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 120166 -91045.8 119967 -91045.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 124692 -101985 128649 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 126424 -91189.8 125649 -91964.4)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139938 -99823.1 139938 -98598.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 136885 -90323.1 139940 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 112720 -89232.7 112720 -88520.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119192 -104099 121305 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 112720 -88520.1 112082 -87882.3)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 124692 -104323 124692 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 119466 -92497.9 119792 -92823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134951 -89867.7 136430 -89867.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139819 -100096 139819 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119192 -104323 119192 -104099)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -91323.1 133908 -91189.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -101293 132127 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139546 -100369 138622 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 136430 -89867.7 136885 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 133908 -91189.8 126424 -91189.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132127 -101293 130042 -103378)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139938 -99823.1 140092 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 128649 -101985 130042 -103378)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 119466 -91546.2 119466 -92497.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139940 -90323.1 140092 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119967 -91045.8 119466 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 120166 -91045.8 120166 -91297.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110251 -87872.7 110242 -87863.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 118024 -91546.2 115034 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110242 -86593.1 110242 -85323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 118024 -91808.1 118024 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -92722.9 134042 -91323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 120166 -91297.9 120742 -91873.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 601 110261 -87882.3 110251 -87872.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 142011 -96525 142692 -96525)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 109812 -83596.2 118024 -91808.1)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 101516 -77180.1 101516 -81198.9 103288 -82970.8)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 103846 -82970.8 104472 -83596.2 109812 -83596.2)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 103288 -82970.8 103846 -82970.8)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 132135 -42666.6 135792 -46323.1)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125618 -92086.6 125618 -91995.2)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 100536 -62101.7 96374.8 -57940.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125126 -92579.4 125618 -92086.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 118796 -92579.4 125126 -92579.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 96374.8 -45076.4 98784.6 -42666.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 96374.8 -57940.4 96374.8 -45076.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 98784.6 -42666.6 132135 -42666.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 100536 -76200.4 100536 -62101.7)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 101516 -77180.1 100536 -76200.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125618 -91995.2 125649 -91964.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 118024 -91808.1 118796 -92579.4)(net /MAIN5V)(type route)) + (wire (path F.Cu 200 93366.6 -94323.1 93366.6 -93338.1)(net FAN_PWM)(type route)) + (wire (path B.Cu 200 134564 -56323.1 118720 -72166.6 96481.1 -72166.6)(net FAN_PWM)(type route)) + (wire (path B.Cu 200 135132 -56323.1 134564 -56323.1)(net FAN_PWM)(type route)) + (wire (path In2.Cu 200 93366.6 -75281 96481.1 -72166.6)(net FAN_PWM)(type route)) + (wire (path In2.Cu 200 93366.6 -93338.1 93366.6 -75281)(net FAN_PWM)(type route)) + (wire (path F.Cu 200 99335.9 -93353.8 99480.8 -93353.8)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 98366.6 -94323.1 95016.6 -94323.1)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 105165 -95462.2 105254 -95373.1)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 98366.6 -94323.1 99335.9 -93353.8)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 102921 -95462.2 105165 -95462.2)(net FAN_GATE)(type route)) + (wire (path In2.Cu 200 99480.8 -93353.8 100813 -93353.8 102921 -95462.2)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 124832 -95023.1 124732 -94923.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 125122 -95023.1 124832 -95023.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 112482 -91373.7 113057 -91373.7)(net /IGATE)(type route)) + (wire (path F.Cu 200 124272 -94823.1 123692 -94823.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 124732 -94923.1 124372 -94923.1 124272 -94823.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 110242 -89133.1 112482 -91373.7)(net /IGATE)(type route)) + (wire (path F.Cu 200 125152 -94993.1 125122 -95023.1)(net /IGATE)(type route)) + (wire (path In2.Cu 200 125152 -94993.1 125122 -95023.1)(net /IGATE)(type route)) + (wire (path In2.Cu 200 119025 -95023.1 115376 -91373.7 113057 -91373.7)(net /IGATE)(type route)) + (wire (path In2.Cu 200 125122 -95023.1 119025 -95023.1)(net /IGATE)(type route)) + (wire (path F.Cu 1000 101654 -88323.1 105533 -88323.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -85323.1 115192 -86593.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 105533 -88323.1 113223 -96013.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 101654 -88323.1 106356 -83621.4)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 113223 -96013.1 118622 -96013.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 113490 -83621.4 115192 -85323.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 250.2 119112 -96503.1 119792 -95823.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -87863.1 115192 -89133.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 106356 -83621.4 113490 -83621.4)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -86593.1 115192 -87863.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 118622 -96013.1 119112 -96503.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 200 130904 -117823 130904 -113486)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 125340 -111499 126615 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 123492 -117923 123492 -114165 124917 -112740)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 126615 -111499 128917 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 124917 -111922 125340 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 126615 -111715 126615 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 130904 -113486 129742 -112323)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 124917 -112740 124917 -111922)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 128917 -111499 129742 -112323)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 127666 -75710.4 127666 -92441.5)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 141369 -75485.3 127891 -75485.3 127666 -75710.4)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 142752 -74103.1 141369 -75485.3)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 102202 -75710.4 127666 -75710.4)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 101976 -75485.3 102202 -75710.4)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 128109 -110221 128109 -92885)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 102040 -47474.8 102040 -46323.1)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101801 -75310.2 101801 -47713.4)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 128109 -92885 127666 -92441.5)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 103192 -46323.1 102040 -46323.1)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101976 -75485.3 101801 -75310.2)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 126615 -111715 128109 -110221)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101801 -47713.4 102040 -47474.8)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 129127 -117470 125742 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 105692 -46323.1 106843 -46323.1)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -113349 125742 -112323)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -113349 126634 -113349)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 107995 -47474.8 113853 -47474.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124340 -117617 124340 -117973)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 106843 -46323.1 107995 -47474.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -117470 125742 -113349)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 129479 -117823 129127 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124340 -117973 123590 -118723 123492 -118723)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -117470 124487 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 113853 -47474.8 114758 -48379.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124487 -117470 124340 -117617)(net /I2C_SCL)(type route)) + (wire (path B.Cu 200 133072 -88991.5 129603 -92460)(net /I2C_SCL)(type route)) + (wire (path B.Cu 200 137323 -88991.5 133072 -88991.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 121162 -56719.9 121162 -54783.3 114758 -48379.8)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 137323 -88991.5 137323 -88059.6)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 140212 -74103.1 136109 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 131431 -73012 134442 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 129603 -110380 129603 -92460)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 134442 -70000.5 121162 -56719.9)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 131431 -82166.9 131431 -73012)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 126634 -113349 129603 -110380)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 136109 -70000.5 134442 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 137323 -88059.6 131431 -82166.9)(net /I2C_SCL)(type route)) + (wire (path F.Cu 1000 186336 -111033 189663 -111033)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 173293 -118323 177293 -122323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 176067 -104039)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 182492 -122323 186044 -118771)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 189663 -111033 191153 -109543 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 171592 -118323 173293 -118323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 179343 -104039 186336 -111033)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 177293 -122323 182492 -122323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 200444 -118771 207472 -111743)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 179343 -104039)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 207472 -111743 205271 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 198904 -102323 200195 -103614)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 178692 -102323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 186044 -118771 200444 -118771)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 205271 -109543 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 200195 -103614 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 198692 -102323 198904 -102323)(net /3V3_MODEM)(type route)) + (wire (path In2.Cu 1000 172812 -76202.9 174192 -74823.1)(net /3V3_MODEM)(type route)) + (wire (path In2.Cu 1000 176067 -104039 176067 -100298 172812 -97043.1 172812 -76202.9)(net /3V3_MODEM)(type route)) + (wire (path B.Cu 200 151196 -76823.1 174192 -76823.1)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 146833 -81185.4 151196 -76823.1)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 146833 -81323.1 146833 -81185.4)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 145732 -81323.1 146833 -81323.1)(net /DOUT_4G)(type route)) + (wire (path F.Cu 1500 104042 -98776.2 104042 -102323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101307 -107323 101042 -107323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99104.8 -87947.5 99104.8 -82832.5)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166798 -79716.7 166798 -79030.3)(net /VEH5V)(type route)) + (wire (path F.Cu 200 124672 -94323.1 123692 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 119032 -95323.1 119792 -95323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 117952 -94803.1 118028 -94803.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 98729.1 -88323.1 99104.8 -87947.5)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -90979.1 101385 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 111642 -97323.1 111642 -97291.4)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 108410 -94059.8 101385 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 98729.1 -88323.1 101385 -90979.1)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 101307 -107874 101307 -107323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -94059.8 101385 -96014.7)(net /VEH5V)(type route)) + (wire (path F.Cu 200 123702 -94313.1 123692 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1001.8 99690.4 -97874.3 99241.6 -98323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166192 -80323.1 166798 -79716.7)(net /VEH5V)(type route)) + (wire (path F.Cu 1001.8 99690.4 -96791 99690.4 -97874.3)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -96014.7 101333 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99690.4 -96791 100414 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101214 -80722.8 102876 -80722.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 102092 -112323 102092 -108857)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 104042 -102323 101307 -105058)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 111642 -97291.4 108410 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 100414 -96067.2 101333 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118070 -94761.2 118470 -94761.2)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166192 -80070.7 166192 -80323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118028 -94803.1 118070 -94761.2)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 102191 -108758 101307 -107874)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118470 -94761.2 119032 -95323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101333 -96067.2 104042 -98776.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99104.8 -82832.5 101214 -80722.8)(net /VEH5V)(type route)) + (wire (path F.Cu 200 124692 -94303.1 124672 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101307 -105058 101307 -107058)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 102092 -108857 102191 -108758)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 101307 -107323 101307 -107058)(net /VEH5V)(type route)) + (wire (path B.Cu 200 117974 -94803.1 117952 -94803.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124452 -94313.1 124102 -93963.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 91341.6 -70003.1 91341.6 -65723.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 112462 -100293 110872 -100293)(net /VEH5V)(type route)) + (wire (path B.Cu 200 106042 -91903.1 87741.6 -73603.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 91341.6 -65723.1 93641.6 -63423.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124692 -94303.1 124662 -94333.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 122782 -95113.1 118284 -95113.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124572 -94313.1 124452 -94313.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 87741.6 -73603.1 91341.6 -70003.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124662 -94333.1 124592 -94333.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 93641.6 -63423.1 93641.6 -42433.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124592 -94333.1 124572 -94313.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 123932 -93963.1 122782 -95113.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 106042 -95463.1 106042 -91903.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124102 -93963.1 123932 -93963.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 123302 -42433.1 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 118284 -95113.1 117974 -94803.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 117952 -94803.1 112462 -100293)(net /VEH5V)(type route)) + (wire (path B.Cu 200 93641.6 -42433.1 123302 -42433.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 110872 -100293 106042 -95463.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103228 -76003.8 103228 -74966.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -78226.4 103217 -77885)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 107967 -46736.5 107967 -46492.7 110091 -44368.6)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -74614.7 102876 -51827.7)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103217 -77885 103217 -76475.2)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 110091 -44368.6 125237 -44368.6)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 162924 -75156.4 162924 -60109.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -51827.7 107967 -46736.5)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103228 -74966.8 102876 -74614.7)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 127192 -46585.8 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 162924 -60109.4 153114 -50298.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 166798 -79030.3 162924 -75156.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103217 -76475.2 102987 -76244.9)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -80722.8 102876 -78226.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 125237 -44368.6 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 130905 -50298.8 127192 -46585.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102987 -76244.9 102987 -76244.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 153114 -50298.8 130905 -50298.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102987 -76244.8 103228 -76003.8)(net /VEH5V)(type route)) + (wire (path F.Cu 200 101070 -116264 101070 -115090)(net /LED_A)(type route)) + (wire (path F.Cu 200 99789.9 -107426 98794.6 -107426 98691.6 -107323)(net /LED_A)(type route)) + (wire (path F.Cu 200 101129 -116323 101070 -116264)(net /LED_A)(type route)) + (wire (path B.Cu 200 99789.9 -107426 177369 -107426)(net /LED_A)(type route)) + (wire (path In2.Cu 200 99789.9 -113809 99789.9 -107426)(net /LED_A)(type route)) + (wire (path In2.Cu 200 196970 -89823.1 194972 -89823.1)(net /LED_A)(type route)) + (wire (path In2.Cu 200 210167 -70825.2 206021 -74970.6 206021 -80771.8)(net /LED_A)(type route)) + (wire (path In2.Cu 200 101070 -115090 99789.9 -113809)(net /LED_A)(type route)) + (wire (path In2.Cu 200 206021 -80771.8 196970 -89823.1)(net /LED_A)(type route)) + (wire (path In2.Cu 200 210167 -70823.1 210167 -70825.2)(net /LED_A)(type route)) + (wire (path In2.Cu 200 194972 -89823.1 177369 -107426)(net /LED_A)(type route)) + (wire (path F.Cu 200 110777 -111539 110092 -112225 110092 -112323)(net USART1_RX)(type route)) + (wire (path B.Cu 200 128569 -82276.2 128569 -92441.5)(net USART1_RX)(type route)) + (wire (path B.Cu 200 129523 -81323.1 130073 -81323.1)(net USART1_RX)(type route)) + (wire (path B.Cu 200 128972 -81323.1 129523 -81323.1)(net USART1_RX)(type route)) + (wire (path B.Cu 200 135467 -75929.3 166040 -75929.3)(net USART1_RX)(type route)) + (wire (path B.Cu 200 130073 -81323.1 135467 -75929.3)(net USART1_RX)(type route)) + (wire (path B.Cu 200 129523 -81323.1 128569 -82276.2)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -48863.1 113652 -65323.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 166040 -75929.3 167919 -75929.3 187982 -55865.6)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128972 -81323.1 128972 -80221.4)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 116192 -46323.1 115964 -46323.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 189284 -55865.6 187982 -55865.6)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128972 -80221.4 128550 -80221.4)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -65323.1 122432 -74103.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 111558 -112320 126866 -112320)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 111192 -48863.1 113652 -48863.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 115964 -46323.1 113652 -48635.5)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128569 -110616 128569 -92441.5)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 126866 -112320 128569 -110616)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128550 -80221.4 122432 -74103.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 110777 -111539 111558 -112320)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -48635.5 113652 -48863.1)(net USART1_RX)(type route)) + (wire (path F.Cu 200 134492 -98820 134492 -99373)(net 3V3)(type route)) + (wire (path F.Cu 200 135318 -113147 132142 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 131903 -111079 125093 -111079)(net 3V3)(type route)) + (wire (path F.Cu 200 124892 -118723 124340 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 130493 -118300 130904 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 130495 -118323 130192 -118626)(net 3V3)(type route)) + (wire (path F.Cu 200 130265 -118072 130493 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 117792 -129583 117792 -128481)(net 3V3)(type route)) + (wire (path F.Cu 200 131316 -118300 132142 -117474)(net 3V3)(type route)) + (wire (path F.Cu 200 117792 -128481 124340 -121933)(net 3V3)(type route)) + (wire (path F.Cu 200 114092 -112323 114869 -113101)(net 3V3)(type route)) + (wire (path F.Cu 200 93541.6 -83323.1 93541.6 -83794.1)(net 3V3)(type route)) + (wire (path F.Cu 200 98191.6 -46323.1 94584.4 -46323.1)(net 3V3)(type route)) + (wire (path F.Cu 200 100042 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path F.Cu 200 128092 -112323 130265 -114496)(net 3V3)(type route)) + (wire (path F.Cu 200 93541.6 -83794.1 94149.1 -84401.6)(net 3V3)(type route)) + (wire (path F.Cu 200 123314 -113101 124092 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 130192 -118626 130192 -119004)(net 3V3)(type route)) + (wire (path F.Cu 200 100075 -102357 100042 -102323)(net 3V3)(type route)) + (wire (path F.Cu 200 130192 -119004 129871 -119325)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -113147 132142 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 97041.6 -107323 100075 -104290 100075 -102357)(net 3V3)(type route)) + (wire (path F.Cu 200 126045 -119325 125443 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 136142 -112323 135318 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -111318 131903 -111079)(net 3V3)(type route)) + (wire (path F.Cu 200 114092 -112323 111742 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118300 130904 -118323)(net 3V3)(type route)) + (wire (path F.Cu 200 124092 -112081 124092 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 129871 -119325 126045 -119325)(net 3V3)(type route)) + (wire (path F.Cu 200 125093 -111079 124092 -112081)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118323 130495 -118323)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -117474 132142 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 114869 -113101 123314 -113101)(net 3V3)(type route)) + (wire (path F.Cu 200 134167 -104323 133430 -103586)(net 3V3)(type route)) + (wire (path F.Cu 200 130265 -114496 130265 -118072)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118300 131316 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 124340 -121933 124340 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 124892 -118723 125443 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -111318 132142 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 134492 -99373 134042 -99823.1)(net 3V3)(type route)) + (wire (path B.Cu 200 135245 -99573 150483 -99573)(net 3V3)(type route)) + (wire (path B.Cu 200 134492 -98820 135245 -99573)(net 3V3)(type route)) + (wire (path B.Cu 200 150483 -99573 153057 -96999.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 156330 -61293.4 155854 -61769.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 154907 -61769.4 152485 -64190.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -97843.5 98628.8 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 156646 -55886.9 156646 -60643.3)(net 3V3)(type route)) + (wire (path In2.Cu 200 134492 -102524 134492 -98820)(net 3V3)(type route)) + (wire (path In2.Cu 200 152485 -71136.8 155452 -74103.1)(net 3V3)(type route)) + (wire (path In2.Cu 200 97092.6 -71742.2 90247.9 -64897.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 152092 -54602.6 155362 -54602.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -76362.2 97092.6 -73418.7)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -84401.6 94149.1 -76362.2)(net 3V3)(type route)) + (wire (path In2.Cu 200 152679 -94522.5 153057 -94899.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 133430 -103586 134492 -102524)(net 3V3)(type route)) + (wire (path In2.Cu 200 153057 -94899.9 153057 -96999.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 90247.9 -64897.5 90247.9 -50659.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 117792 -129583 117792 -120918)(net 3V3)(type route)) + (wire (path In2.Cu 200 155452 -74103.1 152679 -76875.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 132142 -111318 132142 -104874)(net 3V3)(type route)) + (wire (path In2.Cu 200 99196.8 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 117792 -120918 99196.8 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 90247.9 -50659.5 94584.4 -46323.1)(net 3V3)(type route)) + (wire (path In2.Cu 200 98628.8 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 155854 -61769.4 154907 -61769.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 152485 -64190.9 152485 -71136.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 152679 -76875.6 152679 -94522.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -84401.6 94149.1 -97843.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 150372 -56323.1 152092 -54602.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 156330 -60959.4 156330 -61293.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 156646 -60643.3 156330 -60959.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 155362 -54602.6 156646 -55886.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 97092.6 -73418.7 97092.6 -71742.2)(net 3V3)(type route)) + (wire (path In2.Cu 200 132142 -104874 133430 -103586)(net 3V3)(type route)) + (wire (path F.Cu 1000 91070.6 -62038.4 89256.9 -62038.4)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 89041.6 -56733.1 89041.6 -61823.1)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 89256.9 -62038.4 89041.6 -61823.1)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 91451.6 -54323.1 89041.6 -56733.1)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 103321 -83220.8 99159.9 -79059.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124852 -90708.6 124469 -90326)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 123640 -90326 123239 -90726.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124469 -90326 123640 -90326)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124852 -90708.6 124852 -90708.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 118996 -90726.9 118626 -90356.4 110878 -90356.4)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99159.9 -79059.6 99159.9 -77654.4 99084.4 -77578.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 125048 -90512.7 124852 -90708.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 172692 -133636 129569 -90512.7)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 110878 -90356.4 103743 -83220.8 103321 -83220.8)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 123239 -90726.9 118996 -90726.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99084.4 -70052.2 91070.6 -62038.4)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99084.4 -77578.9 99084.4 -70052.2)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 129569 -90512.7 125048 -90512.7)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 172692 -133823 172692 -133636)(net /24V_IN)(type route)) + (wire (path F.Cu 200 173978 -49661.6 173978 -50210.9)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 175842 -47798.1 173978 -49661.6)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 172096 -52093.1 171692 -52093.1)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 173978 -50210.9 172096 -52093.1)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 164692 -60134.8 164501 -60325.1)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 155563 -61161.3 148028 -61161.3)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 164692 -59323.1 164692 -60134.8)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 148028 -61161.3 145817 -63373.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 155563 -61161.3 155949 -61547.7)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 161752 -60325.1 164501 -60325.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 160530 -61547.7 161752 -60325.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 155949 -61547.7 160530 -61547.7)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 171692 -50823.1 172722 -49792.7)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 176267 -45323.1 174692 -45323.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 176566 -45323.1 176267 -45323.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 172722 -49792.7 173372 -49792.7)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 177545 -46302.1 176566 -45323.1)(net /FB_FAN)(type route)) + (wire (path In2.Cu 200 173372 -49792.7 174055 -49792.7 177545 -46302.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 97169.2 -103451 99473.4 -103451)(net FAN_TACH_RAW)(type route)) + (wire (path F.Cu 200 96041.6 -102323 97169.2 -103451)(net FAN_TACH_RAW)(type route)) + (wire (path B.Cu 200 99473.4 -103451 100700 -102224 171920 -102224 175684 -98459.4)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 208460 -66238 208460 -70313)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210643 -55474.8 211485 -56316.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210192 -55474.8 210643 -55474.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 196950 -81823.1 192320 -81823.1)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 208460 -70313 196950 -81823.1)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 192320 -81823.1 175684 -98459.4)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 211485 -56316.8 211485 -63212.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210192 -54323.1 210192 -55474.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 211485 -63212.8 208460 -66238)(net FAN_TACH_RAW)(type route)) + (wire (path F.Cu 200 107200 -78267.1 98866.2 -78267.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98462.2 -78671.1 96632.6 -78671.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101522 97691.6 -102323)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 115667 -69044 111002 -73708.9)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101522 98492.6 -101217)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 100891 -101522 98492.6 -101522)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 101692 -102323 100891 -101522)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 147661 -69044 115667 -69044)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98866.2 -78267.1 98462.2 -78671.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101217 98373.9 -101217)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 111002 -74465 107200 -78267.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 111002 -73708.9 111002 -74465)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 147832 -68873.6 147661 -69044)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 147832 -56323.1 147832 -68873.6)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 96632.6 -99476.2 96632.6 -78671.1)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 98373.9 -101217 96632.6 -99476.2)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 166742 -55441.5 166742 -55441.5)(net BST_FAN)(type route)) + (wire (path F.Cu 200 167642 -45323.1 168395 -46076.2)(net BST_FAN)(type route)) + (wire (path F.Cu 200 166742 -54633.1 166742 -55441.5)(net BST_FAN)(type route)) + (wire (path In2.Cu 200 166742 -47729.2 168395 -46076.2)(net BST_FAN)(type route)) + (wire (path In2.Cu 200 166742 -55441.5 166742 -47729.2)(net BST_FAN)(type route)) + (wire (path B.Cu 200 119892 -74103.1 121428 -72566.8)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 188585 -61644.6 194364 -55865.6)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 121428 -72566.8 170603 -72566.8)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 181526 -61644.6 188585 -61644.6)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 170603 -72566.8 181526 -61644.6)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111062 -54619.6 111062 -65273.1)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111192 -47474.8 110904 -47474.8)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110040 -48338.5 110040 -53597.9)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111192 -46323.1 111192 -47474.8)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110040 -53597.9 111062 -54619.6)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111062 -65273.1 119892 -74103.1)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110904 -47474.8 110040 -48338.5)(net /USART1_TX)(type route)) + (wire (path F.Cu 1000 127332 -83542.7 131319 -83542.7)(net /SW_BAT)(type route)) + (wire (path F.Cu 1500 163792 -104823 163792 -91863.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 250.2 122242 -88633.1 122242 -91873.1 121742 -91873.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 1000 122242 -88633.1 127332 -83542.7)(net /SW_BAT)(type route)) + (wire (path B.Cu 1500 131319 -83542.7 134090 -83542.7 142411 -91863 163792 -91863 + 163792 -91863.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 200 112272 -74103.1 113429 -75260.4)(net /BATLED3)(type route)) + (wire (path F.Cu 200 201429 -48323.1 201260 -48492.5 200007 -48492.5)(net /BATLED3)(type route)) + (wire (path F.Cu 200 113429 -75260.4 166527 -75260.4)(net /BATLED3)(type route)) + (wire (path In2.Cu 200 199741 -48226 193561 -48226 166527 -75260.4)(net /BATLED3)(type route)) + (wire (path In2.Cu 200 200007 -48492.5 199741 -48226)(net /BATLED3)(type route)) + (wire (path F.Cu 200 203192 -44323.1 203079 -44435.6 203079 -48323.1)(net /BLED3)(type route)) + (wire (path F.Cu 200 119792 -93823.1 115026 -93823.1)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 113192 -106044 113192 -107323)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 115026 -93823.1 114647 -94202.2)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 114271 -93827.1 114647 -94202.2)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 113192 -106044 112899 -105752)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 112899 -94126.5 113198 -93827.1)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 112899 -105752 112899 -94126.5)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 113198 -93827.1 114271 -93827.1)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 202153 -51599.1 183645 -51599.1)(net /BATLED4)(type route)) + (wire (path F.Cu 200 116964 -71950.3 157823 -71950.3)(net /BATLED4)(type route)) + (wire (path F.Cu 200 114812 -74103.1 116964 -71950.3)(net /BATLED4)(type route)) + (wire (path F.Cu 200 164176 -65597.5 169831 -65597.5)(net /BATLED4)(type route)) + (wire (path F.Cu 200 205429 -48323.1 202153 -51599.1)(net /BATLED4)(type route)) + (wire (path F.Cu 200 157823 -71950.3 164176 -65597.5)(net /BATLED4)(type route)) + (wire (path In2.Cu 200 183645 -51783.7 183645 -51599.1)(net /BATLED4)(type route)) + (wire (path In2.Cu 200 169831 -65597.5 183645 -51783.7)(net /BATLED4)(type route)) + (wire (path F.Cu 200 207192 -44323.1 207079 -44435.6 207079 -48323.1)(net /BLED4)(type route)) + (wire (path F.Cu 200 94870.4 -105576 94166.9 -104873)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94870.4 -112044 94870.4 -105576)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94166.9 -104873 91816.6 -104873)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94591.6 -112323 94870.4 -112044)(net EXT_LED)(type route)) + (wire (path F.Cu 200 91816.6 -104873 91816.6 -104779 91096.8 -104060)(net EXT_LED)(type route)) + (wire (path B.Cu 200 109241 -68611.8 121043 -56809.5)(net EXT_LED)(type route)) + (wire (path B.Cu 200 138632 -54743 140212 -56323.1)(net EXT_LED)(type route)) + (wire (path B.Cu 200 92929.4 -68611.8 109241 -68611.8)(net EXT_LED)(type route)) + (wire (path B.Cu 200 122309 -54743 138632 -54743)(net EXT_LED)(type route)) + (wire (path B.Cu 200 121043 -56809.5 121043 -56008.8 122309 -54743)(net EXT_LED)(type route)) + (wire (path In2.Cu 200 91096.8 -104060 91096.8 -70444.4 92929.4 -68611.8)(net EXT_LED)(type route)) + (wire (path F.Cu 200 124832 -95923.1 124702 -95793.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141392 -98771.4 141541 -98771.4)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124286 -95323.1 123692 -95323.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141541 -98771.4 141743 -98569.5)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124696 -95787.9 124696 -95733.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124832 -95933.1 124832 -95923.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124696 -95733.1 124286 -95323.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124832 -95923.1 124696 -95787.9)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124702 -95793.1 124702 -95723.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141392 -99823.1 141392 -98771.4)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125079 -95625.9 125365 -95625.9)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137579 -94492.3 141657 -98569.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 129534 -95012.8 131360 -95012.8)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 129414 -94892.5 129534 -95012.8)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 136259 -94492.3 136260 -94491.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137092 -94492.3 137579 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 126344 -94646.7 127757 -94646.7)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 141657 -98569.5 141743 -98569.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 127757 -94646.7 128002 -94892.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 131360 -95012.8 131881 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 128002 -94892.5 129414 -94892.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 136260 -94491.1 137091 -94491.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125365 -95625.9 126344 -94646.7)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124802 -95633.1 125072 -95633.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 131881 -94492.3 136259 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125072 -95633.1 125079 -95625.9)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124752 -95853.1 124752 -95683.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124832 -95933.1 124752 -95853.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124752 -95683.1 124802 -95633.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137091 -94491.1 137092 -94492.3)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 93691.6 -105823 93691.6 -106635)(net /LED_K)(type route)) + (wire (path F.Cu 200 90663.9 -109662 90663.9 -116834)(net /LED_K)(type route)) + (wire (path F.Cu 200 90991.1 -117161 98416.4 -117161)(net /LED_K)(type route)) + (wire (path F.Cu 200 99254.1 -116323 100258 -117327)(net /LED_K)(type route)) + (wire (path F.Cu 200 98416.4 -117161 99254.1 -116323)(net /LED_K)(type route)) + (wire (path F.Cu 200 100258 -117327 106750 -117327 110969 -113108)(net /LED_K)(type route)) + (wire (path F.Cu 200 93691.6 -106635 90663.9 -109662)(net /LED_K)(type route)) + (wire (path F.Cu 200 90663.9 -116834 90991.1 -117161)(net /LED_K)(type route)) + (wire (path B.Cu 200 131851 -110718 134536 -108033)(net /LED_K)(type route)) + (wire (path B.Cu 200 110969 -113108 113360 -110718 131851 -110718)(net /LED_K)(type route)) + (wire (path B.Cu 200 134536 -108033 173947 -108033)(net /LED_K)(type route)) + (wire (path In2.Cu 200 196992 -87823.1 194157 -87823.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 197761 -82663.1 197761 -87054.2)(net /LED_K)(type route)) + (wire (path In2.Cu 200 208862 -69996.4 208862 -71562)(net /LED_K)(type route)) + (wire (path In2.Cu 200 194157 -87823.1 173947 -108033)(net /LED_K)(type route)) + (wire (path In2.Cu 200 208862 -71562 197761 -82663.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 197761 -87054.2 196992 -87823.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 210167 -69474.8 209383 -69474.8 208862 -69996.4)(net /LED_K)(type route)) + (wire (path In2.Cu 200 210167 -68323.1 210167 -69474.8)(net /LED_K)(type route)) + (wire (path F.Cu 200 177367 -69148.1 177367 -64823.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 178367 -70148.1 177367 -69148.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 182254 -62373.1 179817 -62373.1 177367 -64823.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 197429 -48323.1 196925 -48827.7 196018 -48827.7)(net /BATLED2)(type route)) + (wire (path B.Cu 200 181639 -60961.4 181693 -60961.4)(net /BATLED2)(type route)) + (wire (path B.Cu 200 119069 -72951.4 129670 -62351.1 180250 -62351.1 181639 -60961.4)(net /BATLED2)(type route)) + (wire (path B.Cu 200 109732 -74103.1 110883 -72951.4 119069 -72951.4)(net /BATLED2)(type route)) + (wire (path In2.Cu 200 196018 -48827.7 193827 -48827.7 181693 -60961.4)(net /BATLED2)(type route)) + (wire (path F.Cu 200 153093 -64469.4 153317 -64692.6)(net /SW_IN)(type route)) + (wire (path F.Cu 200 149329 -46323.1 152217 -49210.9)(net /SW_IN)(type route)) + (wire (path F.Cu 200 153317 -64692.6 153317 -65273.1)(net /SW_IN)(type route)) + (wire (path F.Cu 200 152217 -49210.9 152217 -51550.5)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 155100 -62171.1 156021 -62171.1)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 157048 -61143.6 157048 -55720.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 155487 -54159.6 154826 -54159.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 156021 -62171.1 157048 -61143.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 157048 -55720.6 155487 -54159.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 153093 -64469.4 153093 -64177.4 155100 -62171.1)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 154826 -54159.6 152217 -51550.5)(net /SW_IN)(type route)) + (wire (path F.Cu 200 124054 -92460.3 123692 -92823.1)(net /PFI)(type route)) + (wire (path F.Cu 200 107471 -82492.5 107654 -82308.9)(net /PFI)(type route)) + (wire (path F.Cu 200 106504 -102323 106504 -97236.3)(net /PFI)(type route)) + (wire (path F.Cu 200 103328 -84222.5 105058 -82492.5)(net /PFI)(type route)) + (wire (path F.Cu 200 105692 -102323 106504 -102323 107542 -102323)(net /PFI)(type route)) + (wire (path F.Cu 200 105058 -82492.5 107471 -82492.5)(net /PFI)(type route)) + (wire (path F.Cu 200 124054 -91327.7 124054 -92460.3)(net /PFI)(type route)) + (wire (path B.Cu 200 115211 -82484.5 124054 -91327.7)(net /PFI)(type route)) + (wire (path B.Cu 200 107830 -82484.5 115211 -82484.5)(net /PFI)(type route)) + (wire (path B.Cu 200 107654 -82308.9 107830 -82484.5)(net /PFI)(type route)) + (wire (path In2.Cu 200 106504 -97236.3 103328 -94060.3 103328 -84222.5)(net /PFI)(type route)) + (wire (path F.Cu 200 160854 -68295.4 164176 -64973.5)(net /BATLED1)(type route)) + (wire (path F.Cu 200 107192 -74103.1 108343 -74103.1 108343 -73815.2)(net /BATLED1)(type route)) + (wire (path F.Cu 200 113863 -68295.4 160854 -68295.4)(net /BATLED1)(type route)) + (wire (path F.Cu 200 193429 -48679.1 193429 -48323.1)(net /BATLED1)(type route)) + (wire (path F.Cu 200 191111 -50997.4 193429 -48679.1)(net /BATLED1)(type route)) + (wire (path F.Cu 200 108343 -73815.2 113863 -68295.4)(net /BATLED1)(type route)) + (wire (path F.Cu 200 189563 -50997.4 191111 -50997.4)(net /BATLED1)(type route)) + (wire (path In2.Cu 200 174326 -66234.5 165437 -66234.5 164176 -64973.5)(net /BATLED1)(type route)) + (wire (path In2.Cu 200 189563 -50997.4 174326 -66234.5)(net /BATLED1)(type route)) + (wire (path F.Cu 200 118852 -94203.1 118982 -94333.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117642 -94203.1 117522 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 116944 -94323.1 116831 -94436.2)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 118982 -94333.1 118992 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 105042 -106776 105481 -106337)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 105042 -107323 105042 -106776)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117642 -94203.1 118852 -94203.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 118992 -94323.1 119792 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117522 -94323.1 116944 -94323.1)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 106242 -75285.2 105070 -74113.3)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 117352 -74103.1 116170 -75285.2 106242 -75285.2)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 105070 -74113.3 98082.6 -74113.3)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 97242.4 -96055.8 97242.4 -74953.5)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 102237 -101051 97242.4 -96055.8)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -100976 113085 -93372.4)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -106337 105481 -101051 105481 -100976)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -101051 102237 -101051)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 113085 -93372.4 115767 -93372.4)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 97242.4 -74953.5 98082.6 -74113.3)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 115767 -93372.4 116831 -94436.2)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 135232 -98013.4 135692 -98013.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 120742 -97933.8 121563 -98755.2 125989 -98755.2)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -99823.1 135692 -98013.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 120742 -96773.1 120742 -97933.8)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -98013.4 135692 -97331.1)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 125989 -98755.2 126665 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -97331.1 140543 -92479.8)(net /CHRG_STAT)(type route)) + (wire (path B.Cu 200 135166 -98079.4 126665 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path B.Cu 200 135232 -98013.4 135166 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path In2.Cu 200 139537 -91474.1 140543 -92479.8)(net /CHRG_STAT)(type route)) + (wire (path In2.Cu 200 132592 -74103.1 139537 -81048.7 139537 -91474.1)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 127560 -97466 127934 -97091.7)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 144411 -96559.7 144411 -99547.6)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 127934 -95675.5 127507 -95248.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 139635 -104323 135817 -104323)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 121729 -98353.4 123583 -98353.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 124470 -97466 127560 -97466)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 127934 -97091.7 127934 -95675.5)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 144411 -99547.6 139635 -104323)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 123583 -98353.4 124470 -97466)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 121242 -96773.1 121242 -97865.7 121729 -98353.4)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 142017 -99171.3 141489 -99171.3)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136926 -94894 136925 -94892.8)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 141489 -99171.3 137212 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 144411 -96559.7 144411 -96777.1)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136425 -94894 132213 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136427 -94892.8 136425 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 144411 -96777.1 142017 -99171.3)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 127673 -95414.5 127507 -95248.4)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 131693 -95414.5 127673 -95414.5)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 132213 -94894 131693 -95414.5)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136925 -94892.8 136427 -94892.8)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 137212 -94894 136926 -94894)(net /CHRG_FAULT)(type route)) + (wire (path In2.Cu 200 141922 -94070.4 144411 -96559.7)(net /CHRG_FAULT)(type route)) + (wire (path In2.Cu 200 135132 -74103.1 141922 -80893.1 141922 -94070.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 177292 -72417.8 139357 -72417.8 137672 -74103.1)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 178367 -68498.1 179164 -69295.8)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 179164 -70545.1 177292 -72417.8)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 179164 -69295.8 179164 -70545.1)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 94629.1 -51096.6 86098.1 -51096.6)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86587.8 -53479.2 86587.8 -59102)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 85151.6 -52043.1 86587.8 -53479.2)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 98254.1 -54721.7 94629.1 -51096.6)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86098.1 -51096.6 85151.6 -52043.1)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 98254.1 -60373.1 98254.1 -54721.7)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86587.8 -59102 84366.6 -61323.1)(net Q10_GATE)(type route)) + (wire (path F.Cu 1000 98856.9 -63725.4 100129 -62453.1)(net 24V)(type route)) + (wire (path F.Cu 1000 164690 -54617.4 164690 -54093.6)(net 24V)(type route)) + (wire (path F.Cu 1000 83264.1 -58490.6 83264.1 -61978.2)(net 24V)(type route)) + (wire (path F.Cu 1000 100129 -62453.1 103953 -66277)(net 24V)(type route)) + (wire (path F.Cu 1000 164690 -54093.6 165151 -53632.3)(net 24V)(type route)) + (wire (path F.Cu 1000 159279 -61953.7 159425 -62100)(net 24V)(type route)) + (wire (path F.Cu 1000 161810 -57497.3 164690 -54617.4)(net 24V)(type route)) + (wire (path F.Cu 1000 159425 -62100 159952 -62626.4)(net 24V)(type route)) + (wire (path F.Cu 1000 155248 -66277 159425 -62100)(net 24V)(type route)) + (wire (path F.Cu 1000 163466 -61759.7 170930 -61759.7)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -52697.7 159942 -57497.3)(net 24V)(type route)) + (wire (path F.Cu 1000 86991.6 -63725.4 98856.9 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 601 166472 -53632.3 166742 -53363.1)(net 24V)(type route)) + (wire (path F.Cu 1000 162600 -62626.4 163466 -61759.7)(net 24V)(type route)) + (wire (path F.Cu 1000 159952 -62626.4 162600 -62626.4)(net 24V)(type route)) + (wire (path F.Cu 601 165151 -53632.3 166472 -53632.3)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -57497.3 159279 -58160.5)(net 24V)(type route)) + (wire (path F.Cu 1000 103953 -66277 155248 -66277)(net 24V)(type route)) + (wire (path F.Cu 1000 161417 -51223.1 159942 -52697.7)(net 24V)(type route)) + (wire (path F.Cu 1000 100129 -62453.1 100129 -61323.1)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -57497.3 161810 -57497.3)(net 24V)(type route)) + (wire (path F.Cu 1000 170930 -61759.7 173367 -59323.1)(net 24V)(type route)) + (wire (path F.Cu 1000 161417 -47048.1 161417 -51223.1)(net 24V)(type route)) + (wire (path F.Cu 1000 86991.6 -63725.4 86991.6 -71823.1)(net 24V)(type route)) + (wire (path F.Cu 1000 83264.1 -61978.2 85011.4 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 1000 161692 -46773.1 161417 -47048.1)(net 24V)(type route)) + (wire (path F.Cu 1000 85151.6 -56603.1 83264.1 -58490.6)(net 24V)(type route)) + (wire (path F.Cu 1000 159279 -58160.5 159279 -61953.7)(net 24V)(type route)) + (wire (path F.Cu 1000 85011.4 -63725.4 86991.6 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 200 112332 -103113 111542 -102323)(net /PROG)(type route)) + (wire (path F.Cu 200 113902 -103113 112332 -103113)(net /PROG)(type route)) + (wire (path F.Cu 200 114626 -93323.1 113519 -94430.4)(net /PROG)(type route)) + (wire (path F.Cu 200 119792 -93323.1 114626 -93323.1)(net /PROG)(type route)) + (wire (path In2.Cu 200 113519 -102730 113902 -103113)(net /PROG)(type route)) + (wire (path In2.Cu 200 113519 -94430.4 113519 -102730)(net /PROG)(type route)) + (wire (path F.Cu 200 134042 -95323.1 134240 -95521.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134042 -95323.1 134042 -92973.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 123692 -93323.1 129932 -93323.1 130447 -92807.7)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134042 -92973.1 135692 -91323.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134240 -95521.1 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 121742 -97490.4 122003 -97751.7)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 121742 -96773.1 121742 -97490.4)(net /VFB_BST)(type route)) + (wire (path B.Cu 200 122281 -97473.7 133966 -97473.7 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path B.Cu 200 122003 -97751.7 122281 -97473.7)(net /VFB_BST)(type route)) + (wire (path In2.Cu 200 134240 -96600.3 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path In2.Cu 200 130447 -92807.7 134240 -96600.3)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 122742 -96773.1 122966 -96548.4)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 140795 -91374.8 136676 -95494.5)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 141392 -91374.8 140795 -91374.8)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 122966 -96548.4 123383 -96548.4)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 141392 -90323.1 141392 -91374.8)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 126842 -95850.2 136320 -95850.2)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 123383 -96548.4 126144 -96548.4 126842 -95850.2)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 136320 -95850.2 136676 -95494.5)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 123692 -95823.1 124722 -96853.6 127321 -96853.6)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 139201 -97466.2 141392 -95275.9 141392 -94823.1)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 138136 -97466.2 139201 -97466.2)(net /F1_SEL)(type route)) + (wire (path B.Cu 200 127321 -96853.6 127625 -96549.9 137219 -96549.9 138136 -97466.2)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 127692 -87323.1 127208 -87323.1)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 122742 -91789.7 122742 -91873.1)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 127208 -87323.1 122742 -91789.7)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 166742 -52093.1 165423 -52093.1 161136 -56380.2)(net FREQ_FAN)(type route)) + (wire (path F.Cu 1000 104033 -71164.6 104345 -71164.6)(net IGN_IN)(type route)) + (wire (path F.Cu 1000 102192 -69323.1 104033 -71164.6)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 142355 -97561.4 146430 -97561.4 182692 -133823)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 132607 -87813.1 142355 -97561.4)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 110405 -87813.1 132607 -87813.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104680 -71499.1 104680 -78475.6)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -71164.6 104680 -71499.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104680 -78475.6 104345 -78810.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -81753 110405 -87813.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -78810.1 104345 -81753)(net IGN_IN)(type route)) + (via "Via[0-3]_600:300_um" 160281 -60946 (net /DIN_4G)(type route)) + (via "Via[0-3]_600:300_um" 163333 -77836.4 (net /DIN_4G)(type route)) + (via "Via[0-3]_600:300_um" 109642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -55773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 101142 -98323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 195147 -110668 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 177917 -45323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 160694 -59682.2 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 187990 -62946.4 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -55773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 154882 -63306.3 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 100017 -94323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 98158.1 -78069.3 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 97851.6 -82803.1 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 100361 -84328.2 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 120490 -67486.2 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 166684 -63823.1 (net SW_FAN)(type route)) + (via "Via[0-3]_600:300_um" 170313 -55362.6 (net SW_FAN)(type route)) + (via "Via[0-3]_600:300_um" 179603 -49835.2 (net /5V_FAN)(type route)) + (via "Via[0-3]_600:300_um" 190531 -50051.9 (net /5V_FAN)(type route)) + (via "Via[0-3]_600:300_um" 108674 -96377.2 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 154715 -93359.8 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 102590 -100216 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 173407 -53346.3 (net /EN_FAN)(type route)) + (via "Via[0-3]_600:300_um" 174361 -60216.8 (net /EN_FAN)(type route)) + (via "Via[0-3]_800:400_um" 119382 -89423.1 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_800:400_um" 126822 -89223.1 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 93354.2 -109585 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 116832 -109478 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 125532 -94123.1 (net /NTC)(type route)) + (via "Via[0-3]_600:300_um" 115743 -105396 (net /NTC)(type route)) + (via "Via[0-3]_600:300_um" 124193 -57474.8 (net /NRST)(type route)) + (via "Via[0-3]_600:300_um" 188692 -107616 (net /SW3_NODE)(type route)) + (via "Via[0-3]_600:300_um" 187097 -116027 (net /SW3_NODE)(type route)) + (via "Via[0-3]_600:300_um" 171760 -97690.9 (net /SW_5V)(type route)) + (via "Via[0-3]_800:400_um" 202152 -113193 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 171617 -113477 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 156118 -63406.1 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 188670 -102323 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 196891 -110544 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 181474 -109498 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 187142 -107718 (net /BST3)(type route)) + (via "Via[0-3]_600:300_um" 192976 -114752 (net /BST3)(type route)) + (via "Via[0-3]_600:300_um" 92198.6 -67700.9 (net /BAT_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 92096.6 -109080 (net /BAT_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 161642 -61571.2 (net /PWR_CTRL)(type route)) + (via "Via[0-3]_600:300_um" 94238.2 -70412.6 (net /5V_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 106832 -111583 (net /5V_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 164399 -108749 (net /NTC_TEMP)(type route)) + (via "Via[0-3]_600:300_um" 169737 -114087 (net /NTC_TEMP)(type route)) + (via "Via[0-3]_600:300_um" 185252 -114635 (net /COMP3_C)(type route)) + (via "Via[0-3]_600:300_um" 185103 -116791 (net /COMP3_C)(type route)) + (via "Via[0-3]_600:300_um" 125649 -91964.4 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 118024 -91808.1 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 101516 -77180.1 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 96481.1 -72166.6 (net FAN_PWM)(type route)) + (via "Via[0-3]_600:300_um" 93366.6 -93338.1 (net FAN_PWM)(type route)) + (via "Via[0-3]_600:300_um" 99480.8 -93353.8 (net FAN_GATE)(type route)) + (via "Via[0-3]_600:300_um" 102921 -95462.2 (net FAN_GATE)(type route)) + (via "Via[0-3]_600:300_um" 125152 -94993.1 (net /IGATE)(type route)) + (via "Via[0-3]_600:300_um" 113057 -91373.7 (net /IGATE)(type route)) + (via "Via[0-3]_600:300_um" 126615 -111715 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 101976 -75485.3 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 127666 -92441.5 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 126634 -113349 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 114758 -48379.8 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 129603 -92460 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 137323 -88991.5 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 176067 -104039 (net /3V3_MODEM)(type route)) + (via "Via[0-3]_600:300_um" 117952 -94803.1 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 124692 -94303.1 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 166798 -79030.3 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 102876 -80722.8 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 177369 -107426 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 101070 -115090 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 99789.9 -107426 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 166040 -75929.3 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 128569 -92441.5 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 110777 -111539 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 134492 -98820 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 94149.1 -84401.6 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 99126.1 -102323 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 133430 -103586 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 153057 -96999.8 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 132142 -111318 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 94584.4 -46323.1 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 91070.6 -62038.4 (net /24V_IN)(type route)) + (via "Via[0-3]_600:300_um" 164501 -60325.1 (net /BASE_LS)(type route)) + (via "Via[0-3]_600:300_um" 155563 -61161.3 (net /BASE_LS)(type route)) + (via "Via[0-3]_600:300_um" 177545 -46302.1 (net /FB_FAN)(type route)) + (via "Via[0-3]_600:300_um" 173372 -49792.7 (net /FB_FAN)(type route)) + (via "Via[0-3]_600:300_um" 99473.4 -103451 (net FAN_TACH_RAW)(type route)) + (via "Via[0-3]_600:300_um" 175684 -98459.4 (net FAN_TACH_RAW)(type route)) + (via "Via[0-3]_600:300_um" 147661 -69044 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 96632.6 -78671.1 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 98373.9 -101217 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 168395 -46076.2 (net BST_FAN)(type route)) + (via "Via[0-3]_600:300_um" 166742 -55441.5 (net BST_FAN)(type route)) + (via "Via[0-3]_600:300_um" 163792 -91863.1 (net /SW_BAT)(type route)) + (via "Via[0-3]_600:300_um" 131319 -83542.7 (net /SW_BAT)(type route)) + (via "Via[0-3]_600:300_um" 166527 -75260.4 (net /BATLED3)(type route)) + (via "Via[0-3]_600:300_um" 200007 -48492.5 (net /BATLED3)(type route)) + (via "Via[0-3]_600:300_um" 114647 -94202.2 (net /CLPROG_TP)(type route)) + (via "Via[0-3]_600:300_um" 113192 -106044 (net /CLPROG_TP)(type route)) + (via "Via[0-3]_600:300_um" 169831 -65597.5 (net /BATLED4)(type route)) + (via "Via[0-3]_600:300_um" 183645 -51599.1 (net /BATLED4)(type route)) + (via "Via[0-3]_600:300_um" 92929.4 -68611.8 (net EXT_LED)(type route)) + (via "Via[0-3]_600:300_um" 91096.8 -104060 (net EXT_LED)(type route)) + (via "Via[0-3]_600:300_um" 141743 -98569.5 (net /F0_SEL)(type route)) + (via "Via[0-3]_600:300_um" 124832 -95933.1 (net /F0_SEL)(type route)) + (via "Via[0-3]_600:300_um" 173947 -108033 (net /LED_K)(type route)) + (via "Via[0-3]_600:300_um" 110969 -113108 (net /LED_K)(type route)) + (via "Via[0-3]_600:300_um" 196018 -48827.7 (net /BATLED2)(type route)) + (via "Via[0-3]_600:300_um" 181693 -60961.4 (net /BATLED2)(type route)) + (via "Via[0-3]_600:300_um" 153093 -64469.4 (net /SW_IN)(type route)) + (via "Via[0-3]_600:300_um" 152217 -51550.5 (net /SW_IN)(type route)) + (via "Via[0-3]_600:300_um" 124054 -91327.7 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 103328 -84222.5 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 106504 -97236.3 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 107654 -82308.9 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 189563 -50997.4 (net /BATLED1)(type route)) + (via "Via[0-3]_600:300_um" 164176 -64973.5 (net /BATLED1)(type route)) + (via "Via[0-3]_600:300_um" 98082.6 -74113.3 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 116831 -94436.2 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 105481 -106337 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 135232 -98013.4 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 126665 -98079.4 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 140543 -92479.8 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 144411 -96559.7 (net /CHRG_FAULT)(type route)) + (via "Via[0-3]_600:300_um" 127507 -95248.4 (net /CHRG_FAULT)(type route)) + (via "Via[0-3]_600:300_um" 113902 -103113 (net /PROG)(type route)) + (via "Via[0-3]_600:300_um" 113519 -94430.4 (net /PROG)(type route)) + (via "Via[0-3]_600:300_um" 134240 -97200.4 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 130447 -92807.7 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 122003 -97751.7 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 123383 -96548.4 (net /F2_SEL)(type route)) + (via "Via[0-3]_600:300_um" 136676 -95494.5 (net /F2_SEL)(type route)) + (via "Via[0-3]_600:300_um" 138136 -97466.2 (net /F1_SEL)(type route)) + (via "Via[0-3]_600:300_um" 127321 -96853.6 (net /F1_SEL)(type route)) + (via "Via[0-3]_600:300_um" 104345 -71164.6 (net IGN_IN)(type route)) + ) +) diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.ses b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.ses new file mode 100644 index 0000000..46226e4 --- /dev/null +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD-usb.ses @@ -0,0 +1,7541 @@ +(session "hbox-watchdog-v3-PROD-usb" + (base_design "hbox-watchdog-v3-PROD-usb") + (placement + (resolution um 10) + (component Resistor_SMD:R_0603_1608Metric + (place R2 1673667 -593231 front 0) + (place Ren2 1781917 -593231 front 0) + (place R5 922417 -1123231 front 0) + (place Rg 941917 -943231 front 0) + (place R31 1289167 -1123231 front 0) + (place Rfreq2 1795167 -1118231 front 0) + (place Rmled 2031500 -879500 front 0) + (place R3 978667 -1073231 front 0) + (place R60 1795167 -1023231 front 0) + (place Rdfu 1109167 -1123231 front 0) + (place R20 1738667 -453231 front 0) + (place Rts 968667 -1023231 front 0) + (place RB3 2022542 -483231 front 0) + (place RB4 2062542 -483231 front 0) + (place R61 1795167 -1073231 front 0) + (place R1 1638667 -593231 front 0) + (place R55 1018667 -1073231 front 0) + (place Rled 954167 -1123231 front 0) + (place Rgs 991917 -943231 front 0) + (place R41 1781917 -648231 front 0) + (place RB2 1982542 -483231 front 0) + (place Rtp 1008667 -1023231 front 0) + (place R30 1249167 -1123231 front 0) + (place R6 987417 -1123231 front 0) + (place R52 1083667 -1023231 front 0) + (place R56 1058667 -1073231 front 0) + (place R42 1149167 -1123231 front 0) + (place R53 1348667 -913231 front 0) + (place R51 1048667 -1023231 front 0) + (place Rcomp2 1796917 -1163231 front 0) + (place R58 1349917 -1043231 front 0) + (place Rrp 851917 -613231 front 0) + (place R21 1770917 -453231 front 0) + (place R7 1029167 -1123231 front 0) + (place RB1 1942542 -483231 front 0) + (place Ren1 1741917 -593231 front 0) + (place R8 1069167 -1123231 front 0) + (place R54 1348667 -953231 front 0) + (place R57 1348667 -998231 front 0) + (place R50 1123667 -1023231 front 0) + ) + (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (place P13 1161917 -463231 front 0) + ) + (component Resistor_SMD:R_0603_1608Metric::1 + (place Rigb 1013667 -743231 front 180) + (place Rig 1013667 -693231 front 180) + ) + (component Diode_SMD:D_SMA + (place Dbk 1681917 -658231 front 270) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (place P6 2101917 -618231 front 90) + ) + (component LED_SMD:LED_0805_2012Metric + (place DB2 1982542 -443231 front 0) + (place DB1 1942542 -443231 front 0) + (place DB3 2022542 -443231 front 0) + (place DB4 2062542 -443231 front 0) + (place D1 1001917 -1163231 front 0) + (place D4G 2031000 -921000 front 0) + ) + (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical::1" + (place P4 2101917 -1083231 front 90) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (place P10 2101667 -800731 front 90) + (place P8 2101667 -708231 front 90) + ) + (component Capacitor_SMD:C_0603_1608Metric + (place Ccomp 1758417 -534731 front 270) + ) + (component "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (place U7 1976217 -1125731 front 180) + (place U2 1692167 -527281 front 180) + ) + (component Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical + (place J1 1071917 -563231 front 90) + (place J2 1071917 -741031 front 90) + ) + (component Capacitor_SMD:C_0603_1608Metric::1 + (place Ccomp2 1879667 -1148231 front 0) + (place Cu3 1329167 -1123231 front 0) + (place C7 961917 -1163231 front 0) + (place Cbst2 1879167 -1098231 front 0) + (place Cbst 1684167 -453231 front 0) + (place C9 1015917 -833231 front 0) + (place C11 1621917 -512231 front 0) + (place C31 1124167 -973231 front 0) + (place C5 921917 -1163231 front 0) + (place C24 1189167 -1123231 front 0) + (place Cu4 1369167 -1123231 front 0) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::1" + (place P11 1357917 -463231 front 0) + (place P2 1271917 -463231 front 0) + ) + (component "Package_TO_SOT_SMD:SOT-23" + (place Q1 1542542 -643231 front 0) + (place Q5 1467542 -643231 front 0) + (place Q2 1061917 -963231 front 0) + (place Q4 927542 -1058231 front 0) + (place DzG 991917 -613231 front 0) + (place Q6 1831917 -633231 front 0) + ) + (component "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (place Q7 1127167 -872281 front 0) + ) + (component Capacitor_SMD:C_0805_2012Metric + (place C34 1309917 -1043231 front 0) + (place C35 1301917 -963231 front 0) + (place C30 1001917 -983231 front 0) + (place C23 1797417 -512231 front 0) + ) + (component "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (place U3 1241917 -1183231 front 0) + ) + (component Capacitor_SMD:C_0805_2012Metric::1 + (place C40 1796917 -963231 front 270) + (place C41 1986917 -1032731 front 270) + ) + (component Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical + (place J7 1741917 -748231 front 0) + (place J8 1965417 -748231 front 0) + ) + (component Diode_SMD:D_SMA::1 + (place D2 941917 -983231 front 0) + (place Dbk2 1884917 -1038231 front 0) + ) + (component Resistor_SMD:R_1206_3216Metric + (place RS1 1001917 -883231 front 0) + ) + (component MountingHole:MountingHole_3.2mm + (place MH3 851917 -1353231 front 0) + (place MH4 2111917 -1353231 front 0) + (place MH2 2111917 -453231 front 0) + (place MH1 851917 -453231 front 0) + ) + (component Diode_SMD:D_SMB + (place D10 911917 -618231 front 0) + ) + (component Resistor_SMD:R_0603_1608Metric::2 + (place Rcomp 1758417 -486231 front 270) + (place R40 1783667 -693231 front 270) + ) + (component Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical + (place H3 1111917 -463231 front 0) + ) + (component "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (place L6 1676917 -1048231 front 0) + (place L2 1872917 -478231 front 0) + (place L7 1676917 -1183231 front 0) + ) + (component "Package_TO_SOT_SMD:SOT-563" + (place U4 1301917 -1183231 front 0) + ) + (component TestPoint:TestPoint_Pad_D1.5mm + (place TP1 1131917 -1073231 front 0) + (place TP2 1276917 -873231 front 0) + ) + (component Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (place SW4G 1481750 -1356000 front 0) + ) + (component Capacitor_SMD:C_1210_3225Metric + (place C22 1616917 -452981 front 90) + ) + (component Resistor_SMD:R_0603_1608Metric::3 + (place Rcc1 1614250 -1247500 front 90) + (place Rcc2 1654000 -1247500 front 90) + (place Rfreq 1611360 -555552 front 90) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" + (place P5 981917 -463231 front 0) + ) + (component "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (place JP4 1413917 -998231 front 0) + (place JP3 1413917 -948231 front 0) + (place JP2 1413917 -903231 front 0) + ) + (component "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" + (place JP1 1655417 -803231 front 0) + ) + (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::2" + (place P12 2101917 -1213231 front 90) + ) + (component Capacitor_SMD:C_1210_3225Metric::1 + (place C32 1206667 -1043231 front 0) + (place C33 1261667 -1043231 front 0) + ) + (component Connector_USB:USB_C_Receptacle_GCT_USB4085 + (place J9 1611750 -1294250 front 0) + ) + (component "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" + (place P1 1726917 -1338231 front 0) + ) + (component Fuse:Fuse_1812_4532Metric + (place F1 1471917 -463231 front 0) + ) + (component "Relay_THT:Relay_SPDT_Omron_G5V-1" + (place K1 1892842 -558656 front 0) + ) + (component Capacitor_SMD:CP_Elec_6.3x7.7 + (place C43 1851917 -1223231 front 0) + (place C10 896917 -718231 front 0) + ) + (component "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (place U6 1217417 -943231 front 0) + ) + (component "Package_TO_SOT_SMD:TO-252-2" + (place Q10 901917 -543231 front 0) + ) + (component Button_Switch_THT:SW_PUSH_6mm + (place SW1 1991917 -1333231 front 0) + ) + (component Capacitor_SMD:CP_Elec_6.3x7.7::1 + (place C3 1546917 -485231 front 90) + ) + (component "Diode_SMD:D_SOD-123" + (place D5 951917 -833231 front 0) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (place P3 2101917 -953231 front 90) + ) + (component "Diode_SMD:D_SOD-123::1" + (place D6 1996917 -618231 front 180) + ) + (component Module:Arduino_UNO_R3 + (place MOD1 1152517 -1295831 back 180) + ) + ) + (was_is + ) + (routes + (resolution um 10) + (parser + (host_cad "KiCad's Pcbnew") + (host_version 10.0.4) + ) + (library_out + (padstack "Via[0-3]_600:300_um" + (shape + (circle F.Cu 6000 0 0) + ) + (shape + (circle In1.Cu 6000 0 0) + ) + (shape + (circle In2.Cu 6000 0 0) + ) + (shape + (circle B.Cu 6000 0 0) + ) + (attach off) + ) + (padstack "Via[0-3]_800:400_um" + (shape + (circle F.Cu 8000 0 0) + ) + (shape + (circle In1.Cu 8000 0 0) + ) + (shape + (circle In2.Cu 8000 0 0) + ) + (shape + (circle B.Cu 8000 0 0) + ) + (attach off) + ) + (padstack "Via[0-3]_600:300_um" + (shape + (circle F.Cu 6000 0 0) + ) + (shape + (circle In1.Cu 6000 0 0) + ) + (shape + (circle In2.Cu 6000 0 0) + ) + (shape + (circle B.Cu 6000 0 0) + ) + (attach off) + ) + ) + (network_out + (net GND + (wire + (path F.Cu 2000 + 1841290 -633231 + 1845060 -629464 + 1879900 -629464 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1782409 -600613 + 1789791 -593231 + 1790167 -593231 + ) + ) + (via "Via[0-3]_600:300_um" 1782409 -600613 + ) + (wire + (path F.Cu 2000 + 1812783 -1117265 + 1804383 -1117265 + 1803417 -1118231 + ) + ) + (via "Via[0-3]_600:300_um" 1812783 -1117265 + ) + (wire + (path F.Cu 2000 + 1809039 -1082641 + 1803417 -1077019 + 1803417 -1073231 + ) + ) + (via "Via[0-3]_600:300_um" 1809039 -1082641 + ) + (wire + (path F.Cu 2000 + 956416 -1117730 + 956916 -1117730 + 962417 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1000170 -943231 + 1000167 -943231 + ) + ) + (wire + (path F.Cu 2000 + 1790167 -658241 + 1790167 -648231 + ) + ) + (via "Via[0-3]_600:300_um" 1790167 -658241 + ) + (wire + (path F.Cu 2000 + 988290 -1115854 + 995667 -1123231 + ) + ) + (via "Via[0-3]_600:300_um" 988290 -1115854 + ) + (wire + (path F.Cu 2000 + 1099360 -1015552 + 1091917 -1022995 + 1091917 -1023231 + ) + ) + (via "Via[0-3]_600:300_um" 1099360 -1015552 + ) + (wire + (path F.Cu 2000 + 1074328 -1065820 + 1066917 -1073231 + ) + ) + (via "Via[0-3]_600:300_um" 1074328 -1065820 + ) + (wire + (path F.Cu 2000 + 869432 -612663 + 860735 -612663 + 860167 -613231 + ) + ) + (via "Via[0-3]_600:300_um" 869432 -612663 + ) + (wire + (path F.Cu 2000 + 1779170 -453231 + 1779167 -453231 + ) + ) + (wire + (path F.Cu 2000 + 1086750 -1128403 + 1082589 -1128403 + 1077417 -1123231 + ) + ) + (via "Via[0-3]_600:300_um" 1086750 -1128403 + ) + (wire + (path F.Cu 2000 + 1141291 -1013857 + 1131917 -1023231 + ) + ) + (via "Via[0-3]_600:300_um" 1141291 -1013857 + ) + (wire + (path F.Cu 2000 + 1696128 -682190 + 1685876 -682190 + 1681917 -678231 + ) + ) + (via "Via[0-3]_600:300_um" 1696128 -682190 + ) + (wire + (path F.Cu 2000 + 1963020 -440247 + 1970183 -440247 + 1973167 -443231 + ) + ) + (via "Via[0-3]_600:300_um" 1963020 -440247 + ) + (wire + (path F.Cu 2000 + 1923048 -440247 + 1930183 -440247 + 1933167 -443231 + ) + ) + (via "Via[0-3]_600:300_um" 1923048 -440247 + ) + (wire + (path F.Cu 2000 + 2013167 -443231 + 2013167 -455281 + ) + ) + (via "Via[0-3]_600:300_um" 2013167 -455281 + ) + (wire + (path F.Cu 2000 + 2043020 -440247 + 2050183 -440247 + 2053167 -443231 + ) + ) + (via "Via[0-3]_600:300_um" 2043020 -440247 + ) + (wire + (path F.Cu 2000 + 2011365 -924058 + 2018567 -924058 + 2021625 -921000 + ) + ) + (via "Via[0-3]_600:300_um" 2011365 -924058 + ) + (wire + (path F.Cu 2000 + 1748436 -538638 + 1754574 -538638 + 1758417 -542481 + ) + ) + (via "Via[0-3]_600:300_um" 1748436 -538638 + ) + (wire + (path F.Cu 2000 + 1951470 -1106680 + 1951468 -1106680 + 1951467 -1106681 + ) + ) + (wire + (path F.Cu 2000 + 1661270 -499396 + 1667417 -505543 + 1667417 -508231 + ) + ) + (via "Via[0-3]_600:300_um" 1661270 -499396 + ) + (wire + (path F.Cu 2000 + 1346658 -1120872 + 1339276 -1120872 + 1336917 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1897022 -1147520 + 1888128 -1147520 + 1887417 -1148231 + ) + ) + (via "Via[0-3]_600:300_um" 1897022 -1147520 + ) + (via "Via[0-3]_600:300_um" 1346658 -1120872 + ) + (wire + (path F.Cu 2000 + 979389 -1162730 + 970168 -1162730 + 969667 -1163231 + ) + ) + (via "Via[0-3]_600:300_um" 979389 -1162730 + ) + (wire + (path F.Cu 2000 + 1016937 -841739 + 1023667 -835009 + 1023667 -833231 + ) + ) + (via "Via[0-3]_600:300_um" 1016937 -841739 + ) + (wire + (path F.Cu 2000 + 1629667 -502202 + 1629667 -512231 + ) + ) + (via "Via[0-3]_600:300_um" 1629667 -502202 + ) + (wire + (path F.Cu 2000 + 1166420 -977731 + 1136417 -977731 + 1131917 -973231 + ) + ) + (wire + (path F.Cu 2000 + 929667 -1163231 + 937318 -1155580 + ) + ) + (via "Via[0-3]_600:300_um" 937318 -1155580 + ) + (wire + (path F.Cu 2000 + 1196917 -1123231 + 1204451 -1115697 + ) + ) + (via "Via[0-3]_600:300_um" 1204451 -1115697 + ) + (wire + (path F.Cu 2000 + 1323099 -1188230 + 1329020 -1188230 + 1377420 -1139830 + 1377420 -1123730 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1309043 -1188230 + 1323099 -1188230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1323099 -1188230 + ) + (wire + (path F.Cu 2000 + 1476920 -643231 + 1476917 -643231 + ) + ) + (wire + (path F.Cu 2000 + 1476920 -643231 + 1523670 -643231 + 1533170 -633731 + 1548150 -633731 + 1548820 -633063 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1323110 -1030843 + 1319417 -1034536 + 1319417 -1043231 + ) + ) + (via "Via[0-3]_600:300_um" 1323110 -1030843 + ) + (wire + (path F.Cu 2000 + 1311417 -986849 + 1311417 -963231 + ) + ) + (via "Via[0-3]_600:300_um" 1311417 -986849 + ) + (wire + (path F.Cu 2000 + 1011420 -983231 + 1011417 -983231 + ) + ) + (wire + (path F.Cu 2000 + 1285220 -1183230 + 1294790 -1183230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1248920 -1179230 + 1258620 -1179230 + 1260020 -1180630 + 1280020 -1180630 + 1282620 -1183230 + 1285220 -1183230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1285220 -1183230 + ) + (wire + (path F.Cu 2000 + 1784524 -975920 + 1793728 -975920 + 1796917 -972731 + ) + ) + (via "Via[0-3]_600:300_um" 1784524 -975920 + ) + (wire + (path F.Cu 2000 + 1986917 -1052266 + 1986917 -1042231 + ) + ) + (via "Via[0-3]_600:300_um" 1986917 -1052266 + ) + (wire + (path F.Cu 2000 + 1922663 -1035842 + 1907306 -1035842 + 1904917 -1038231 + ) + ) + (via "Via[0-3]_600:300_um" 1922663 -1035842 + ) + (wire + (path F.Cu 2000 + 950977 -620383 + 935569 -620383 + 933417 -618231 + ) + ) + (via "Via[0-3]_600:300_um" 950977 -620383 + ) + (wire + (path F.Cu 2000 + 1248917 -1179231 + 1248918 -1179230 + 1248920 -1179230 + ) + ) + (wire + (path F.Cu 2000 + 1309043 -1188230 + 1309042 -1188231 + ) + ) + (wire + (path F.Cu 2000 + 1309040 -1188230 + 1309043 -1188230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1520500 -1366294 + 1520500 -1356000 + ) + ) + (via "Via[0-3]_600:300_um" 1520500 -1366294 + ) + (wire + (path F.Cu 2000 + 1616917 -438231 + 1616917 -449196 + ) + ) + (via "Via[0-3]_600:300_um" 1616917 -449196 + ) + (wire + (path F.Cu 2000 + 1604277 -1241077 + 1612423 -1241077 + 1614250 -1239250 + ) + ) + (via "Via[0-3]_600:300_um" 1604277 -1241077 + ) + (wire + (path F.Cu 2000 + 1641500 -1235636 + 1650386 -1235636 + 1654000 -1239250 + ) + ) + (via "Via[0-3]_600:300_um" 1641500 -1235636 + ) + (wire + (path F.Cu 2000 + 1611360 -547302 + 1611360 -537984 + ) + ) + (via "Via[0-3]_600:300_um" 1611360 -537984 + ) + (wire + (path F.Cu 2000 + 1433189 -987762 + 1426917 -994034 + 1426917 -998231 + ) + ) + (via "Via[0-3]_600:300_um" 1433189 -987762 + ) + (wire + (path F.Cu 2000 + 1426917 -903231 + 1426917 -913158 + 1400917 -939158 + 1400917 -948231 + ) + ) + (wire + (path F.Cu 2000 + 1437232 -900971 + 1429177 -900971 + 1426917 -903231 + ) + ) + (via "Via[0-3]_600:300_um" 1437232 -900971 + ) + (wire + (path F.Cu 2000 + 1232347 -1038964 + 1225684 -1038964 + 1221417 -1043231 + ) + ) + (via "Via[0-3]_600:300_um" 1232347 -1038964 + ) + (wire + (path F.Cu 2000 + 1265542 -1038964 + 1272150 -1038964 + 1276417 -1043231 + ) + ) + (via "Via[0-3]_600:300_um" 1265542 -1038964 + ) + (wire + (path F.Cu 2000 + 1878917 -1236422 + 1878917 -1223231 + ) + ) + (via "Via[0-3]_600:300_um" 1878917 -1236422 + ) + (wire + (path F.Cu 2000 + 923917 -718231 + 923917 -725127 + 933672 -734882 + ) + ) + (via "Via[0-3]_600:300_um" 933672 -734882 + ) + (wire + (path F.Cu 2000 + 1201143 -965689 + 1201143 -964410 + 1205186 -960367 + 1205186 -948246 + 1205171 -948231 + ) + ) + (wire + (path F.Cu 2000 + 1205171 -948231 + 1197920 -948231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1217417 -943234 + 1212420 -948231 + 1205171 -948231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1201143 -965689 + ) + (wire + (path F.Cu 2000 + 1217417 -943234 + 1217417 -943231 + ) + ) + (wire + (path F.Cu 2000 + 1217420 -943231 + 1217417 -943234 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1560018 -451675 + 1553473 -451675 + 1546917 -458231 + ) + ) + (via "Via[0-3]_600:300_um" 1560018 -451675 + ) + (wire + (path F.Cu 2000 + 1990730 -928231 + 1991000 -928500 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1965420 -928231 + 1990730 -928231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1990730 -928231 + ) + (via "Via[0-3]_600:300_um" 1991500 -848500 + ) + (wire + (path F.Cu 2000 + 1197917 -948231 + 1197920 -948231 + ) + ) + (wire + (path F.Cu 2000 + 1294792 -1183231 + 1294791 -1183231 + 1294790 -1183230 + ) + ) + (wire + (path F.Cu 2000 + 1377420 -1123730 + 1376920 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1376917 -1123231 + 1377416 -1123730 + 1377420 -1123730 + ) + ) + (wire + (path F.Cu 2000 + 1970810 -611222 + ) + ) + (wire + (path F.Cu 2000 + 1980420 -618231 + 1977820 -618231 + 1970810 -611222 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1970810 -611222 + 1943640 -584056 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1970810 -611222 + ) + (wire + (path F.Cu 10000 + 1005417 -743231 + 992916 -743231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1005420 -743231 + 1005417 -743231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1741920 -928231 + 1741917 -928231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1741920 -808231 + 1741917 -808231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1000170 -943231 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1446420 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1236420 -767731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1548820 -633063 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1516420 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -907731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1236420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1656420 -697731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -557731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1026420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1656420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -697731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1516420 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -977731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1516420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -697731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -907731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -697731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1516420 -1047730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -837731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -907731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -977731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -627731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1306420 -767731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1446420 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1879900 -629464 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1656420 -907731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1606940 -596822 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -1047730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -767731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1236420 -697731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1236420 -837731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -1047730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1306420 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1656420 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1446420 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1236420 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -837731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1376420 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1236420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1779170 -453231 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1306420 -697731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -627731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -767731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1951470 -1106680 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -837731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1376420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1516420 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1026420 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -907731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1011420 -983231 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1446420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -1047730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1446420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -767731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -627731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1306420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 956416 -767731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -977731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1166420 -977731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -1257730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1376420 -417731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 816416 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1026420 -1187730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1026420 -1327730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1376420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1656420 -557731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1586420 -487731 + (type protect) + ) + (via "Via[0-3]_600:300_um" 886416 -1117730 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1096420 -767731 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1548820 -633063 + 1556150 -625728 + 1578030 -625728 + 1606940 -596822 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1943640 -584056 + 1925310 -584056 + 1879900 -629464 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1665420 -593231 + 1657400 -585211 + 1618550 -585211 + 1606940 -596822 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1965420 -848231 + 1991230 -848231 + 1991500 -848500 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1728000 -808000 + 1728230 -808231 + 1741917 -808231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1741917 -928231 + 1723270 -928231 + 1723000 -928500 + ) + (type protect) + ) + ) + (net /SYS5V + (wire + (path F.Cu 15000 + 1892840 -584056 + 1887460 -578670 + 1696480 -578670 + 1681920 -593231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 2013418 -618232 + 1997780 -633868 + 1942650 -633868 + 1892840 -584056 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1892842 -584056 + 1892840 -584056 + ) + ) + (wire + (path F.Cu 2000 + 1681917 -593231 + 1681920 -593231 + ) + ) + (wire + (path F.Cu 2000 + 1554517 -563231 + 1554520 -563231 + ) + ) + (wire + (path In2.Cu 2000 + 1554520 -576383 + 1554517 -576380 + 1554517 -563231 + ) + ) + (wire + (path In2.Cu 15000 + 1554520 -576383 + 1554520 -563231 + ) + (type protect) + ) + (wire + (path In2.Cu 15000 + 1503720 -690683 + 1503720 -640335 + 1554520 -589535 + 1554520 -576383 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1382917 -463231 + 1382920 -463231 + ) + ) + (wire + (path F.Cu 15000 + 1450541 -463232 + 1515330 -528022 + 1520680 -528022 + 1554520 -561858 + 1554520 -563231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1382920 -463231 + 1450540 -463231 + 1450541 -463232 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1450542 -463231 + 1450541 -463232 + ) + ) + (wire + (path B.Cu 15000 + 1564930 -573643 + 1575340 -584056 + 1892840 -584056 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1564930 -573643 + 1564929 -573643 + 1554517 -563231 + ) + ) + (wire + (path B.Cu 15000 + 1554520 -563231 + 1564930 -573643 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 2013420 -618231 + 2013418 -618232 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2013417 -618231 + 2013418 -618232 + ) + ) + (wire + (path B.Cu 2000 + 1892840 -584056 + 1892842 -584056 + ) + ) + (wire + (path In2.Cu 2000 + 1503720 -690683 + 1503717 -690686 + 1503717 -741031 + ) + ) + (wire + (path In2.Cu 15000 + 1503720 -741031 + 1503720 -690683 + ) + (type protect) + ) + ) + (net /USART1_RX + (wire + (path In1.Cu 2000 + 1289717 -802214 + 1337434 -754497 + 1337434 -737988 + 1492200 -583222 + 1492200 -558420 + 1503383 -547237 + 1868406 -547237 + 1879825 -558656 + ) + ) + (wire + (path In1.Cu 2000 + 1289717 -802214 + 1285500 -802214 + 1224317 -741031 + ) + ) + (wire + (path In1.Cu 2000 + 1892842 -558656 + 1879825 -558656 + ) + ) + (wire + (path In1.Cu 2000 + 1160232 -477518 + 1160232 -676946 + 1224317 -741031 + ) + ) + (wire + (path In1.Cu 2000 + 1161917 -463231 + 1160232 -464916 + 1160232 -477518 + ) + ) + (wire + (path In1.Cu 2000 + 1111917 -488631 + 1123030 -477518 + 1160232 -477518 + ) + ) + (wire + (path In1.Cu 2000 + 1289717 -813231 + 1289717 -802214 + ) + ) + ) + (net /DIN_4G + (wire + (path B.Cu 2000 + 1186917 -463231 + 1186920 -463231 + ) + ) + (wire + (path B.Cu 2000 + 1741918 -788230 + 1741920 -788231 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1633330 -778364 + 1732050 -778364 + 1741918 -788230 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1741917 -788231 + 1741918 -788230 + ) + ) + (wire + (path In2.Cu 2000 + 1741920 -788231 + 1741917 -788231 + ) + ) + (wire + (path In2.Cu 2000 + 1741920 -788231 + 1764870 -788231 + 1892840 -660256 + 1892842 -660256 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1943640 -660256 + 1943642 -660256 + ) + ) + (wire + (path In2.Cu 2000 + 1943640 -660256 + 1892842 -660256 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1633330 -778364 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1602810 -609460 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1602810 -609460 + 1602810 -747836 + 1633330 -778364 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1186920 -463231 + 1198430 -463231 + 1198430 -467550 + 1262090 -531205 + 1386420 -531205 + 1414820 -559604 + 1414820 -567168 + 1443490 -595840 + 1589190 -595840 + 1602810 -609460 + ) + (type protect) + ) + ) + (net IGN_SENSE + (wire + (path F.Cu 2000 + 1005420 -710918 + 1005417 -710915 + 1005417 -693231 + ) + ) + (wire + (path F.Cu 2000 + 1005420 -710918 + 1005420 -693231 + 1023790 -674862 + 1204900 -674862 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1020040 -743231 + 1005420 -728605 + 1005420 -710918 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1021917 -743231 + 1021920 -743231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1020040 -743231 + 1021917 -743231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1204900 -674862 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1003610 -843282 + (type protect) + ) + (via "Via[0-3]_600:300_um" 978516 -828031 + (type protect) + ) + (via "Via[0-3]_600:300_um" 981581 -780693 + (type protect) + ) + (wire + (path In2.Cu 2000 + 978516 -828031 + 978516 -832067 + 989731 -843282 + 1003610 -843282 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 978516 -828031 + 978531 -828017 + 978531 -783744 + 981581 -780693 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1325920 -563231 + 1214290 -674862 + 1204900 -674862 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1008170 -833231 + 1008170 -838727 + 1003610 -843282 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1020040 -743231 + 982581 -780693 + 981581 -780693 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 978516 -828031 + 974466 -832081 + 969566 -832081 + 968416 -833231 + ) + (type protect) + ) + ) + (net SW_FAN + (wire + (path F.Cu 10000 + 1812474 -468606 + 1785050 -441182 + 1703970 -441182 + 1691920 -453231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1826270 -499786 + 1826270 -513697 + 1785670 -554296 + 1723220 -554296 + 1716920 -547990 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1833920 -492142 + 1826270 -499786 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1812474 -468606 + 1812474 -487089 + 1825171 -499786 + 1826270 -499786 + ) + ) + (wire + (path F.Cu 10000 + 1833920 -478231 + 1833920 -490052 + 1812474 -468606 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1691917 -453231 + 1691920 -453231 + ) + ) + (via "Via[0-3]_600:300_um" 1703130 -553626 + (type protect) + ) + (wire + (path F.Cu 10000 + 1681917 -638231 + 1666840 -638231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1681920 -638231 + 1681917 -638231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1666840 -638231 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1703130 -553626 + 1703130 -601943 + 1666840 -638231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1703130 -553626 + 1708770 -547990 + 1716920 -547990 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1716920 -547990 + 1716920 -546331 + ) + (type protect) + ) + ) + (net /5V_FAN + (wire + (path F.Cu 10000 + 2101918 -618233 + 2101920 -618231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1648920 -792711 + 1648920 -788426 + 1702980 -734360 + 1985790 -734360 + 2101918 -618233 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2101917 -618231 + 2101918 -618232 + 2101918 -618233 + ) + ) + (wire + (path F.Cu 2000 + 1730417 -453231 + 1730420 -453231 + ) + ) + (wire + (path B.Cu 10000 + 2101919 -618229 + 1984210 -500520 + 1905310 -500520 + 1905310 -500519 + ) + (type protect) + ) + (wire + (path B.Cu 10000 + 2101920 -618231 + 2101919 -618229 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 2101917 -618231 + 2101919 -618229 + ) + ) + (wire + (path F.Cu 2000 + 1787917 -512231 + 1787920 -512231 + ) + ) + (wire + (path F.Cu 2000 + 1911917 -478231 + 1911920 -478231 + ) + ) + (wire + (path F.Cu 2000 + 1648917 -803231 + 1648920 -803231 + ) + ) + (wire + (path F.Cu 2000 + 921916 -966110 + 921917 -966111 + 921917 -983231 + ) + ) + (wire + (path F.Cu 10000 + 921916 -966110 + 921916 -884339 + 954799 -851456 + 954799 -827519 + 987591 -794728 + 988371 -794728 + 990388 -792711 + 1648920 -792711 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 921916 -983231 + 921916 -966110 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1905310 -500519 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1796030 -498352 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1905310 -500519 + 1903140 -498352 + 1796030 -498352 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1730420 -453231 + 1730420 -454558 + 1742740 -466877 + 1765040 -466877 + 1787920 -489749 + 1787920 -498352 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1911920 -478231 + 1911920 -493911 + 1905310 -500519 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1787920 -498352 + 1787920 -512231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1796030 -498352 + 1787920 -498352 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1648920 -803231 + 1648920 -792711 + ) + (type protect) + ) + ) + (net /FAN_RET + (wire + (path F.Cu 2000 + 961917 -983231 + 961916 -983231 + ) + ) + (wire + (path F.Cu 10000 + 961916 -983231 + 980842 -1002160 + 1025900 -1002160 + ) + (type protect) + ) + (wire + (path In2.Cu 10000 + 2101920 -593231 + 2101917 -593231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1025900 -1002160 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1547150 -933598 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1086740 -963772 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1025900 -1002160 + 1049410 -1002160 + 1086740 -964823 + 1086740 -963772 + ) + (type protect) + ) + (wire + (path In2.Cu 10000 + 2101917 -593231 + 1970130 -593231 + 1960640 -602719 + 1920810 -602719 + 1880280 -643254 + 1823470 -643254 + 1691430 -775292 + 1691430 -789321 + 1547150 -933598 + ) + (type protect) + ) + (wire + (path B.Cu 10000 + 1313820 -932889 + 1308620 -938094 + ) + (type protect) + ) + (wire + (path B.Cu 10000 + 1547150 -933598 + 1545750 -935000 + 1382890 -935000 + 1380770 -932877 + 1357620 -932877 + 1357610 -932889 + ) + (type protect) + ) + (wire + (path B.Cu 7500 + 1308620 -938094 + 1300320 -938094 + 1297230 -935000 + 1261770 -935000 + 1258960 -932193 + 1225150 -932193 + ) + (type protect) + ) + (wire + (path B.Cu 10000 + 1225150 -932193 + 1223620 -933731 + 1223510 -933620 + 1158540 -933620 + 1156930 -932005 + 1118510 -932005 + 1086740 -963772 + ) + (type protect) + ) + (wire + (path B.Cu 7500 + 1357610 -932889 + 1313820 -932889 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1071290 -963231 + 1071830 -963772 + 1086740 -963772 + ) + (type protect) + ) + ) + (net /EN_FAN + (wire + (path F.Cu 2000 + 1761919 -593231 + 1750170 -593231 + 1750170 -595609 + 1743610 -602168 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1773667 -593231 + 1761919 -593231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1761919 -593231 + 1750167 -593231 + ) + ) + (wire + (path F.Cu 2000 + 1717000 -533547 + 1716917 -533630 + 1716917 -533631 + ) + ) + (wire + (path F.Cu 2000 + 1717000 -533547 + 1716920 -533631 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1734070 -533463 + 1717080 -533463 + 1717000 -533547 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1773670 -593231 + 1773667 -593231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1743610 -602168 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1734070 -533463 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1743610 -602168 + 1734070 -592627 + 1734070 -533463 + ) + (type protect) + ) + ) + (net /BLED2 + (wire + (path F.Cu 2000 + 1991918 -443232 + 1990790 -444356 + 1990790 -482927 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1991920 -443231 + 1991918 -443232 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1991917 -443231 + 1991918 -443232 + ) + ) + (wire + (path F.Cu 2000 + 1990790 -482927 + 1990792 -482929 + 1990792 -483231 + ) + ) + (wire + (path F.Cu 2000 + 1990790 -482927 + 1990790 -483231 + ) + (type protect) + ) + ) + (net /BAT_PLUS + (wire + (path F.Cu 2000 + 914167 -1123229 + 914167 -1123231 + ) + ) + (wire + (path F.Cu 8014 + 917156 -1110120 + 917156 -1120240 + 914167 -1123229 + ) + (type protect) + ) + (wire + (path F.Cu 8014 + 914167 -1123229 + 914166 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1292420 -963372 + 1292420 -963231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1190220 -1072880 + 1174480 -1057140 + 1174480 -1028730 + 1203090 -1000120 + 1265020 -1000120 + 1292420 -972725 + 1292420 -963372 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1292417 -963231 + 1292417 -963369 + 1292420 -963372 + ) + ) + (wire + (path F.Cu 2000 + 2101916 -1083230 + 2101917 -1083231 + ) + ) + (wire + (path F.Cu 15000 + 2101916 -1083230 + 2100190 -1083230 + 2025610 -1008660 + 1771870 -1008660 + 1735430 -1045100 + 1735430 -1048230 + 1715916 -1048230 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 2101920 -1083230 + 2101916 -1083230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1212417 -918731 + 1212420 -918731 + ) + ) + (wire + (path F.Cu 2000 + 1715916 -1048230 + 1715917 -1048231 + ) + ) + (wire + (path F.Cu 15000 + 1715916 -1048230 + 1696400 -1048230 + 1670470 -1074160 + 1547620 -1074160 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1168320 -1094780 + (type protect) + ) + (via "Via[0-3]_600:300_um" 933542 -1095850 + (type protect) + ) + (via "Via[0-3]_800:400_um" 1268220 -892231 + (type protect) + ) + (via "Via[0-3]_800:400_um" 1193820 -894231 + (type protect) + ) + (wire + (path B.Cu 5000 + 1193820 -894231 + 1194920 -894231 + 1196120 -893031 + 1208720 -893031 + 1236520 -920831 + 1244720 -920831 + 1244720 -920331 + 1255320 -909731 + 1255320 -904331 + ) + (type protect) + ) + (wire + (path B.Cu 5000 + 1267020 -892727 + 1255420 -904331 + ) + (type protect) + ) + (wire + (path B.Cu 7500 + 1255420 -904331 + 1255320 -904331 + ) + (type protect) + ) + (wire + (path B.Cu 10000 + 1268220 -892231 + 1267520 -892231 + 1267020 -892727 + ) + (type protect) + ) + (wire + (path B.Cu 15000 + 1168320 -1094780 + 934606 -1094780 + 933542 -1095850 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1268220 -892231 + 1268610 -892627 + 1298910 -892627 + 1298920 -892631 + 1346720 -844831 + 1432520 -844831 + 1547620 -959931 + 1547620 -1074160 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1193820 -894231 + 1193820 -897131 + 1195420 -898731 + 1205420 -898731 + 1210920 -904231 + 1210920 -904531 + 1212420 -906031 + 1212420 -918731 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 917156 -1110120 + 919356 -1110120 + 933542 -1095930 + 933542 -1095850 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1190220 -1072880 + 1191510 -1074160 + 1547620 -1074160 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1190220 -1072880 + 1168320 -1094780 + ) + (type protect) + ) + ) + (net /NTC + (wire + (path F.Cu 2000 + 1036165 -1063985 + 1036163 -1063985 + 1026917 -1073231 + ) + ) + (wire + (path F.Cu 2000 + 1036165 -1063985 + 1046190 -1053960 + 1157430 -1053960 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1026920 -1073230 + 1036165 -1063985 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 2101920 -1027470 + 2101917 -1027473 + 2101917 -1033231 + ) + ) + (wire + (path B.Cu 2000 + 2101920 -1027470 + 2101920 -1033230 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1255320 -941231 + 1256620 -942531 + 1257020 -942531 + 1257120 -942631 + 1261020 -942631 + 1261200 -942450 + 1279230 -942450 + 1281350 -944575 + 1295470 -944575 + 1297000 -946111 + 1311940 -946111 + 1317140 -940906 + 1360930 -940906 + 1360940 -940894 + 1372580 -940894 + 1372590 -940906 + 1377460 -940906 + 1381130 -944575 + 2024780 -944575 + 2101920 -1021710 + 2101920 -1027470 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236920 -938231 + 1236917 -938231 + ) + ) + (wire + (path F.Cu 2000 + 1255320 -941231 + 1254920 -940831 + 1254920 -940431 + 1254720 -940231 + 1252810 -940231 + 1249810 -937231 + 1244430 -937231 + 1243430 -938231 + 1236920 -938231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1157430 -1053960 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1255320 -941231 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1157430 -1053960 + 1167190 -1053960 + 1257720 -963431 + 1257720 -943631 + 1255320 -941231 + ) + (type protect) + ) + ) + (net /NRST + (wire + (path In2.Cu 2000 + 2056920 -1259963 + 2056917 -1259966 + 2056917 -1333231 + ) + ) + (wire + (path In2.Cu 2000 + 2056920 -1259963 + 2056920 -1333230 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 2101667 -800734 + 2056920 -845481 + 2056920 -1259963 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1173517 -563231 + 1173520 -563231 + ) + ) + (wire + (path F.Cu 2000 + 1173520 -563231 + 1185030 -574748 + 1241930 -574748 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1991920 -1333230 + 1991918 -1333230 + 1991917 -1333231 + ) + ) + (wire + (path B.Cu 2000 + 1991920 -1333230 + 2056916 -1333230 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 2056916 -1333230 + 2056917 -1333231 + ) + ) + (wire + (path B.Cu 2000 + 2056916 -1333230 + 2056920 -1333230 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 2101667 -800734 + 2101667 -800731 + ) + ) + (wire + (path In2.Cu 2000 + 2101670 -800731 + 2101667 -800734 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1979440 -1320754 + 1991917 -1333231 + ) + ) + (wire + (path In2.Cu 2000 + 1979440 -1320754 + 1991920 -1333230 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1241930 -574748 + 1252230 -574748 + 1414820 -737338 + 1414820 -765313 + 1444620 -795113 + 1444620 -898237 + 1848420 -1302040 + 1960720 -1302040 + 1979440 -1320754 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1241930 -574748 + (type protect) + ) + ) + (net CC_FAN + (wire + (path F.Cu 2000 + 1758420 -518856 + 1758417 -518859 + 1758417 -526981 + ) + ) + (wire + (path F.Cu 2000 + 1758420 -518856 + 1758420 -526981 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1758420 -510731 + 1758420 -518856 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1758420 -510731 + 1758417 -510728 + 1758417 -494481 + ) + ) + (wire + (path F.Cu 2000 + 1758420 -494481 + 1758420 -510731 + ) + (type protect) + ) + ) + (net /SW3_NODE + (wire + (path F.Cu 2000 + 1886917 -1098231 + 1886919 -1098231 + 1886920 -1098230 + ) + ) + (wire + (path F.Cu 2000 + 1864917 -1038231 + 1864919 -1038231 + 1864920 -1038230 + ) + ) + (wire + (path F.Cu 2000 + 1637917 -1183231 + 1637919 -1183231 + 1637920 -1183230 + ) + ) + (wire + (path F.Cu 2000 + 2000967 -1144783 + 2000967 -1144781 + ) + ) + (wire + (path F.Cu 10000 + 2000967 -1144783 + 1985480 -1160270 + 1870970 -1160270 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 2000970 -1144780 + 2000967 -1144783 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1870970 -1160270 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1886920 -1076160 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1870970 -1160270 + 1870970 -1092110 + 1886920 -1076160 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1864920 -1038230 + 1886920 -1060230 + 1886920 -1076160 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1870970 -1160270 + 1859490 -1160270 + 1856070 -1156850 + 1843460 -1156850 + 1837520 -1150910 + 1687260 -1150910 + 1654930 -1183230 + 1637920 -1183230 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1886920 -1076160 + 1886920 -1098230 + ) + (type protect) + ) + ) + (net /SW_5V + (wire + (path F.Cu 2000 + 2000970 -1132080 + 2000968 -1132080 + 2000967 -1132081 + ) + ) + (wire + (path F.Cu 10000 + 2000970 -1132080 + 2021370 -1132080 + 2021520 -1131930 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1546917 -512231 + 1546920 -512231 + ) + ) + (wire + (path F.Cu 2000 + 1254117 -1295831 + 1254119 -1295831 + 1254120 -1295830 + ) + ) + (wire + (path F.Cu 2000 + 1950120 -1133425 + 1950123 -1133425 + 1951467 -1132081 + ) + ) + (wire + (path F.Cu 6010 + 1950120 -1133425 + 1951470 -1132080 + ) + (type protect) + ) + (wire + (path F.Cu 6010 + 1935560 -1134770 + 1948770 -1134770 + 1950120 -1133425 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 2101917 -953231 + 1797420 -953231 + 1796920 -953731 + 1796917 -953731 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 2101920 -953231 + 2101917 -953231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1561180 -634061 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1716170 -1134770 + (type protect) + ) + (via "Via[0-3]_800:400_um" 2021520 -1131930 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1717600 -976909 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1561180 -634061 + 1570100 -642978 + 1570100 -873331 + 1535050 -908383 + 1535050 -938920 + 1618930 -1022800 + 1671710 -1022800 + ) + (type protect) + ) + (wire + (path In2.Cu 10000 + 1716170 -1134770 + 1671710 -1090320 + 1671710 -1022800 + ) + (type protect) + ) + (wire + (path In2.Cu 10000 + 1671710 -1022800 + 1717600 -976909 + ) + (type protect) + ) + (wire + (path B.Cu 10000 + 2021520 -1131930 + 1968520 -1184930 + 1766330 -1184930 + 1716170 -1134770 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1551920 -643231 + 1552810 -643231 + 1561180 -634861 + 1561180 -634061 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1716170 -1134770 + 1712230 -1130840 + 1419110 -1130840 + 1254120 -1295830 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1546920 -512231 + 1570450 -535766 + 1570450 -624794 + 1561180 -634061 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1796917 -953731 + 1740780 -953731 + 1717600 -976909 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1716170 -1134770 + 1935560 -1134770 + ) + (type protect) + ) + ) + (net /COMP3 + (wire + (path F.Cu 2000 + 1794020 -1168580 + 1794016 -1168580 + 1788667 -1163231 + ) + ) + (wire + (path F.Cu 2000 + 1794020 -1168580 + 1799370 -1173930 + 2002520 -1173930 + 2037120 -1139330 + 2037120 -1119380 + 2000970 -1119380 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1788670 -1163230 + 1794020 -1168580 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2000970 -1119380 + 2000968 -1119380 + 2000967 -1119381 + ) + ) + ) + (net /FB3 + (wire + (path F.Cu 2000 + 1803420 -1023230 + 1803418 -1023230 + 1803417 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 1803420 -1023230 + 1886700 -1023230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1792664 -1078974 + 1808670 -1094980 + 1814740 -1094980 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1792664 -1078974 + 1792660 -1078974 + 1786917 -1073231 + ) + ) + (wire + (path F.Cu 2000 + 1786920 -1073230 + 1792664 -1078974 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2000966 -1106680 + 2000967 -1106681 + ) + ) + (wire + (path F.Cu 2000 + 2000966 -1106680 + 1970150 -1106680 + 1968910 -1105440 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2000970 -1106680 + 2000966 -1106680 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1814740 -1094980 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1968910 -1105440 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1886700 -1023230 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1814740 -1094980 + 1886500 -1023230 + 1886700 -1023230 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1968910 -1105440 + 1886700 -1023230 + ) + (type protect) + ) + ) + (net /FREQ3 + (wire + (path F.Cu 2000 + 1790805 -1122120 + 1786917 -1118232 + 1786917 -1118231 + ) + ) + (wire + (path F.Cu 2000 + 1790805 -1122120 + 1786920 -1118230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1951467 -1119383 + 1944840 -1126010 + 1794690 -1126010 + 1790805 -1122120 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1951467 -1119383 + 1951467 -1119381 + ) + ) + (wire + (path F.Cu 2000 + 1951470 -1119380 + 1951467 -1119383 + ) + (type protect) + ) + ) + (net /BST3 + (wire + (path F.Cu 2000 + 1871417 -1098231 + 1871419 -1098231 + 1871420 -1098230 + ) + ) + (wire + (path F.Cu 2000 + 1951467 -1144783 + 1951467 -1144781 + ) + ) + (wire + (path F.Cu 2000 + 1951467 -1144783 + 1951470 -1144780 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1929760 -1147520 + 1948730 -1147520 + 1951467 -1144783 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1929760 -1147520 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1871420 -1077180 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1871420 -1077180 + 1880620 -1067970 + 1890770 -1067970 + 1929760 -1106960 + 1929760 -1147520 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1871420 -1098230 + 1871420 -1077180 + ) + (type protect) + ) + ) + (net /BLED1 + (wire + (path F.Cu 2000 + 1951918 -443232 + 1950790 -444356 + 1950790 -463793 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1951920 -443231 + 1951918 -443232 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1951917 -443231 + 1951918 -443232 + ) + ) + (wire + (path F.Cu 2000 + 1950790 -463793 + 1950792 -463795 + 1950792 -483231 + ) + ) + (wire + (path F.Cu 2000 + 1950790 -463793 + 1950790 -483231 + ) + (type protect) + ) + ) + (net /BAT_SENSE + (wire + (path F.Cu 2000 + 979167 -1123231 + 979166 -1123230 + ) + ) + (wire + (path B.Cu 2000 + 1198918 -563232 + 1198920 -563231 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 921986 -677009 + 1085140 -677009 + 1198918 -563232 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1198917 -563231 + 1198918 -563232 + ) + ) + (wire + (path F.Cu 2000 + 914167 -1163231 + 914166 -1163230 + ) + ) + (wire + (path F.Cu 2000 + 930666 -1127270 + 930667 -1127269 + 930667 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 930666 -1127270 + 930666 -1123230 + 944471 -1109430 + 944471 -1091670 + 937798 -1084990 + 926779 -1084990 + 920966 -1090800 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 930666 -1131310 + 930666 -1127270 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 930666 -1131310 + 971089 -1131310 + 979166 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 914166 -1163230 + 930666 -1146730 + 930666 -1131310 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 920966 -1090800 + (type protect) + ) + (via "Via[0-3]_600:300_um" 921986 -677009 + (type protect) + ) + (wire + (path In2.Cu 2000 + 921986 -677009 + 904914 -694081 + 904914 -1074750 + 920966 -1090800 + ) + (type protect) + ) + ) + (net /PWR_CTRL + (wire + (path F.Cu 2000 + 1630420 -597474 + 1630417 -597471 + 1630417 -593231 + ) + ) + (wire + (path F.Cu 2000 + 1630420 -597474 + 1630420 -601718 + 1616420 -615712 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1630420 -593231 + 1630420 -597474 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1230195 -557354 + 1230194 -557354 + 1224317 -563231 + ) + ) + (wire + (path B.Cu 2000 + 1230195 -557354 + 1236070 -551477 + 1355900 -551477 + 1364020 -559591 + 1364020 -567162 + 1416350 -619494 + 1612640 -619494 + 1616420 -615712 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1224320 -563231 + 1230195 -557354 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1616420 -615712 + (type protect) + ) + ) + (net /GNSS_TX + (wire + (path In2.Cu 2000 + 1249717 -563231 + 1249720 -563231 + ) + ) + (wire + (path In2.Cu 2000 + 1482720 -807722 + 1482720 -802214 + 1440220 -759714 + 1440220 -737063 + 1355980 -652829 + 1339310 -652829 + 1249720 -563231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2101920 -897472 + 2101917 -897475 + 2101917 -903231 + ) + ) + (wire + (path F.Cu 2000 + 2101920 -897472 + 2101920 -903231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1482720 -813231 + 1493730 -813231 + 1493730 -814608 + 1557360 -878231 + 2076920 -878231 + 2090400 -891714 + 2101920 -891714 + 2101920 -897472 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1482720 -813231 + 1482717 -813231 + ) + ) + (wire + (path In2.Cu 2000 + 1482720 -807722 + 1482717 -807725 + 1482717 -813231 + ) + ) + (wire + (path In2.Cu 2000 + 1482720 -813231 + 1482720 -807722 + ) + (type protect) + ) + ) + (net /GNSS_RX + (wire + (path In2.Cu 2000 + 1283069 -571180 + 1330440 -618553 + 1347090 -618553 + 1465620 -737080 + 1465620 -759714 + 1508120 -802214 + 1508120 -807722 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1283069 -571180 + 1283066 -571180 + 1275117 -563231 + ) + ) + (wire + (path In2.Cu 2000 + 1275120 -563231 + 1283069 -571180 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1508120 -807722 + 1508117 -807725 + 1508117 -813231 + ) + ) + (wire + (path In2.Cu 2000 + 1508120 -807722 + 1508120 -813231 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1508120 -813231 + 1508117 -813231 + ) + ) + (wire + (path B.Cu 2000 + 1508120 -813231 + 1519130 -813231 + 1584130 -878231 + 2101917 -878231 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 2101917 -878231 + 2101920 -878231 + ) + (type protect) + ) + ) + (net /5V_SENSE + (wire + (path F.Cu 2000 + 1037417 -1123233 + 1037417 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1037417 -1123233 + 1037420 -1123230 + 1060916 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 954166 -1163230 + 983248 -1134150 + 1026500 -1134150 + 1037417 -1123233 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1300518 -563232 + 1159620 -704126 + 942382 -704126 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1300520 -563231 + 1300518 -563232 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1300517 -563231 + 1300518 -563232 + ) + ) + (wire + (path F.Cu 2000 + 954167 -1163231 + 954166 -1163230 + ) + ) + (wire + (path F.Cu 2000 + 1060916 -1123230 + 1060917 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1060916 -1123230 + 1060920 -1123230 + 1068320 -1115830 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1068320 -1115830 + (type protect) + ) + (via "Via[0-3]_600:300_um" 942382 -704126 + (type protect) + ) + (wire + (path In2.Cu 2000 + 942382 -704126 + 927649 -718860 + 927649 -975929 + 1067550 -1115830 + 1068320 -1115830 + ) + (type protect) + ) + ) + (net /NTC_TEMP + (wire + (path In2.Cu 2000 + 1427517 -563231 + 1427520 -563231 + ) + ) + (wire + (path F.Cu 2000 + 1157420 -1123230 + 1157418 -1123230 + 1157417 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1157420 -1123230 + 1181416 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1181416 -1123230 + 1181417 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1181416 -1123230 + 1181420 -1123230 + 1217160 -1087490 + 1643990 -1087490 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 2101916 -1213230 + 2101917 -1213231 + ) + ) + (wire + (path B.Cu 2000 + 2101916 -1213230 + 1769730 -1213230 + 1697370 -1140870 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 2101920 -1213230 + 2101916 -1213230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1697370 -1140870 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1643990 -1087490 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1427520 -563231 + 1427520 -671231 + 1491020 -734731 + 1491020 -758981 + 1521770 -789739 + 1521770 -950374 + 1524550 -953148 + 1524550 -972489 + 1528070 -976015 + 1532520 -976015 + 1643990 -1087490 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1697370 -1140870 + 1643990 -1087490 + ) + (type protect) + ) + ) + (net /3V3 + (wire + (path In1.Cu 2000 + 1311681 -1132234 + 1181518 -1002071 + 1181518 -968560 + 1144315 -931357 + 1144315 -854835 + 1123202 -833722 + 1123202 -757803 + 1111200 -745801 + 1111200 -730166 + 981917 -600883 + 981917 -463231 + ) + ) + (wire + (path In1.Cu 2000 + 1177917 -1284814 + 1177917 -1265998 + 1311681 -1132234 + ) + ) + (wire + (path In1.Cu 2000 + 1554517 -741031 + 1554517 -889398 + 1311681 -1132234 + ) + ) + (wire + (path In1.Cu 2000 + 1554517 -741031 + 1503717 -690231 + 1503717 -563231 + ) + ) + (wire + (path In1.Cu 2000 + 1177917 -1295831 + 1177917 -1284814 + ) + ) + ) + (net /COMP3_C + (wire + (path F.Cu 2000 + 1871919 -1148229 + 1871920 -1148230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1852520 -1146350 + 1870040 -1146350 + 1871919 -1148229 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1871917 -1148231 + 1871919 -1148229 + ) + ) + (wire + (path F.Cu 2000 + 1807510 -1165570 + 1807506 -1165570 + 1805167 -1163231 + ) + ) + (wire + (path F.Cu 2000 + 1807510 -1165570 + 1809850 -1167910 + 1851030 -1167910 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1805170 -1163230 + 1807510 -1165570 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1851030 -1167910 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1852520 -1146350 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1852520 -1146350 + 1851030 -1147840 + 1851030 -1167910 + ) + (type protect) + ) + ) + (net /MAIN5V + (wire + (path F.Cu 15000 + 1340418 -913230 + 1339080 -911898 + 1264240 -911898 + 1256490 -919644 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1340420 -913231 + 1340418 -913230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1340417 -913231 + 1340418 -913230 + ) + ) + (wire + (path F.Cu 2000 + 1102417 -853231 + 1102420 -853231 + ) + ) + (wire + (path F.Cu 15000 + 1102420 -865931 + 1102420 -853231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1102420 -878631 + 1102420 -865931 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1102417 -865931 + 1102420 -865931 + ) + ) + (wire + (path F.Cu 15000 + 1102510 -878727 + 1102420 -878631 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1102417 -878631 + 1102420 -878631 + ) + ) + (wire + (path F.Cu 2000 + 1300417 -1043231 + 1300419 -1043231 + 1300420 -1043230 + ) + ) + (wire + (path F.Cu 2000 + 1426917 -948231 + 1426920 -948231 + ) + ) + (wire + (path F.Cu 2000 + 1191917 -1043231 + 1191919 -1043231 + 1191920 -1043230 + ) + ) + (wire + (path F.Cu 2000 + 1246917 -1043231 + 1246919 -1043231 + 1246920 -1043230 + ) + ) + (wire + (path F.Cu 2502 + 1197918 -928230 + 1197920 -928231 + ) + (type protect) + ) + (wire + (path F.Cu 2502 + 1194660 -915462 + 1194660 -924979 + 1197918 -928230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197917 -928231 + 1197918 -928230 + ) + ) + (wire + (path F.Cu 2000 + 1207417 -918731 + 1207420 -918731 + ) + ) + (wire + (path In2.Cu 15000 + 1015160 -771801 + 1005360 -762004 + 1005360 -621017 + 963748 -579404 + 963748 -450764 + 987846 -426666 + 1321350 -426666 + 1343292 -448605 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1343292 -448605 + 1357917 -463230 + 1357917 -463231 + ) + ) + (wire + (path In2.Cu 15000 + 1343292 -448605 + 1357920 -463231 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1400917 -998231 + 1400920 -998231 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1399380 -998231 + 1400917 -998231 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1400917 -903231 + 1400920 -903231 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1399400 -903231 + 1400917 -903231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1015160 -771801 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1180240 -918081 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1256490 -919644 + (type protect) + ) + (wire + (path In2.Cu 15000 + 1180240 -918081 + 1187960 -925794 + 1251260 -925794 + 1256180 -920866 + 1256180 -919952 + 1256490 -919644 + ) + (type protect) + ) + (wire + (path B.Cu 15000 + 1015160 -771801 + 1015160 -811989 + 1032880 -829708 + 1038460 -829708 + 1044720 -835962 + 1098120 -835962 + 1180240 -918081 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1399380 -998231 + 1399380 -985982 + 1420110 -965250 + 1426920 -965250 + ) + (type protect) + ) + (wire + (path F.Cu 6010 + 1120820 -878823 + 1102610 -878823 + 1102510 -878727 + ) + (type protect) + ) + (wire + (path F.Cu 2502 + 1201660 -910458 + 1201660 -912979 + 1207420 -918731 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1326420 -1012930 + 1326420 -927229 + 1340420 -913231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1180240 -918081 + 1180240 -915462 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1180240 -915462 + 1150340 -915462 + 1127200 -892327 + 1127200 -885201 + 1120820 -878823 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1201660 -910458 + 1199670 -910458 + 1194660 -915462 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1246920 -1019850 + 1286490 -1019850 + 1300420 -1033780 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1326420 -1012930 + 1321270 -1012930 + 1300420 -1033780 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1340420 -913231 + 1340420 -907772 + 1349510 -898677 + 1364300 -898677 + 1368850 -903231 + 1399400 -903231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1395460 -1003690 + 1386220 -1012930 + 1326420 -1012930 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1191920 -1043230 + 1191920 -1040990 + 1213050 -1019850 + 1246920 -1019850 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1398190 -1000960 + 1398190 -998231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1246920 -1043230 + 1246920 -1019850 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1395460 -1003690 + 1398190 -1000960 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1426920 -965250 + 1426920 -948231 + ) + (type protect) + ) + (wire + (path F.Cu 10498 + 1398190 -998231 + 1399380 -998231 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1194660 -915462 + 1180240 -915462 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1300420 -1033780 + 1300420 -1043230 + ) + (type protect) + ) + ) + (net FAN_PWM + (wire + (path F.Cu 2000 + 933666 -938306 + 933667 -938307 + 933667 -943231 + ) + ) + (wire + (path F.Cu 2000 + 933666 -938306 + 933666 -933381 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 933666 -943231 + 933666 -938306 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 933666 -933381 + (type protect) + ) + (via "Via[0-3]_600:300_um" 964811 -721666 + (type protect) + ) + (wire + (path In2.Cu 2000 + 933666 -933381 + 933666 -752810 + 964811 -721666 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1351320 -563231 + 1345640 -563231 + 1187200 -721666 + 964811 -721666 + ) + (type protect) + ) + ) + (net FAN_GATE + (wire + (path F.Cu 2000 + 983667 -943230 + 983667 -943231 + ) + ) + (wire + (path F.Cu 2000 + 983667 -943230 + 993359 -933538 + 994808 -933538 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 950167 -943231 + 983666 -943231 + 983667 -943230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 950166 -943231 + 950167 -943231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1029210 -954622 + (type protect) + ) + (via "Via[0-3]_600:300_um" 994808 -933538 + (type protect) + ) + (wire + (path In2.Cu 2000 + 994808 -933538 + 1008130 -933538 + 1029210 -954622 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1029210 -954622 + 1051650 -954622 + 1052540 -953731 + ) + (type protect) + ) + ) + (net /IGATE + (wire + (path F.Cu 2000 + 1102417 -891331 + 1102420 -891331 + ) + ) + (wire + (path F.Cu 2000 + 1102420 -891331 + 1124820 -913737 + 1130570 -913737 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236920 -948231 + 1236917 -948231 + ) + ) + (wire + (path F.Cu 2000 + 1251520 -949931 + 1251220 -950231 + 1248320 -950231 + 1247320 -949231 + 1243720 -949231 + 1242720 -948231 + 1236920 -948231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1130570 -913737 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1251520 -949931 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1251520 -949931 + 1251220 -950231 + 1190250 -950231 + 1153760 -913737 + 1130570 -913737 + ) + (type protect) + ) + ) + (net /VIN_SW + (wire + (path F.Cu 2000 + 1151920 -886568 + 1151917 -886571 + 1151917 -891331 + ) + ) + (wire + (path F.Cu 15000 + 1151920 -886568 + 1151920 -891331 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1151920 -881806 + 1151920 -886568 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1151920 -881806 + 1151917 -881803 + 1151917 -878631 + ) + ) + (wire + (path F.Cu 15000 + 1151920 -872281 + 1151920 -881806 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1151920 -872281 + 1151917 -872278 + 1151917 -865931 + ) + ) + (wire + (path F.Cu 15000 + 1146247 -847559 + 1151920 -853231 + 1151920 -872281 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197917 -958231 + 1197920 -958231 + ) + ) + (wire + (path F.Cu 15000 + 1016540 -883231 + 1063560 -836214 + 1134900 -836214 + 1146247 -847559 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1146247 -847559 + 1151917 -853229 + 1151917 -853231 + ) + ) + (wire + (path F.Cu 10000 + 1016542 -883231 + 1055330 -883231 + 1132230 -960131 + 1186220 -960131 + 1191120 -965031 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1016540 -883231 + 1016542 -883231 + ) + (type protect) + ) + (wire + (path F.Cu 2502 + 1191120 -965031 + 1197920 -958231 + ) + (type protect) + ) + ) + (net /I2C_SDA + (wire + (path F.Cu 2000 + 1297420 -1123230 + 1309040 -1134860 + 1309040 -1178230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1266150 -1114990 + 1289170 -1114990 + 1297420 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1297417 -1123231 + 1297419 -1123231 + 1297420 -1123230 + ) + ) + (wire + (path F.Cu 2000 + 1234917 -1179231 + 1234919 -1179231 + 1234920 -1179230 + ) + ) + (wire + (path F.Cu 2000 + 1309042 -1178231 + 1309041 -1178231 + 1309040 -1178230 + ) + ) + (wire + (path B.Cu 2000 + 1420605 -747942 + 1420606 -747942 + 1427517 -741031 + ) + ) + (wire + (path B.Cu 2000 + 1420605 -747942 + 1413690 -754853 + 1278910 -754853 + 1276660 -757104 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1427520 -741031 + 1420605 -747942 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1031917 -463231 + 1031920 -463231 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1019760 -754853 + 1018010 -753102 + 1018010 -477134 + 1020400 -474748 + 1020400 -463231 + 1031917 -463231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1276660 -924415 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1019760 -754853 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1266150 -1117150 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1266150 -1117150 + 1281090 -1102210 + 1281090 -928850 + 1276660 -924415 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1019760 -754853 + 1022020 -757104 + 1276660 -757104 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1276660 -757104 + 1276660 -924415 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1234920 -1179230 + 1234920 -1141650 + 1249170 -1127400 + 1249170 -1119220 + 1253400 -1114990 + 1266150 -1114990 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1266150 -1117150 + 1266150 -1114990 + ) + (type protect) + ) + ) + (net /I2C_SCL + (wire + (path F.Cu 2000 + 1257420 -1123231 + 1257420 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1257420 -1133490 + 1257420 -1123231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1257417 -1123231 + 1257420 -1123231 + ) + ) + (wire + (path In2.Cu 2000 + 1402118 -741030 + 1361090 -700005 + 1344420 -700005 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1402120 -741031 + 1402118 -741030 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1402117 -741031 + 1402118 -741030 + ) + ) + (wire + (path F.Cu 2000 + 1234917 -1187231 + 1234919 -1187231 + 1234920 -1187230 + ) + ) + (wire + (path F.Cu 2000 + 1294792 -1178231 + 1294791 -1178231 + 1294790 -1178230 + ) + ) + (wire + (path F.Cu 2000 + 1056917 -463231 + 1056920 -463231 + ) + ) + (via "Via[0-3]_600:300_um" 1373230 -889915 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1296030 -924600 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1147580 -483798 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1266340 -1133490 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1373230 -889915 + 1373230 -880596 + 1314310 -821669 + 1314310 -730120 + 1344420 -700005 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1266340 -1133490 + 1296030 -1103800 + 1296030 -924600 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1344420 -700005 + 1211620 -567199 + 1211620 -547833 + 1147580 -483798 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1373230 -889915 + 1330720 -889915 + 1296030 -924600 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1257420 -1174700 + 1244870 -1174700 + 1243400 -1176170 + 1243400 -1179730 + 1235900 -1187230 + 1234920 -1187230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1056920 -463231 + 1068430 -463231 + 1079950 -474748 + 1138530 -474748 + 1147580 -483798 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1294790 -1178230 + 1291270 -1174700 + 1257420 -1174700 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1257420 -1174700 + 1257420 -1133490 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1257420 -1133490 + 1266340 -1133490 + ) + (type protect) + ) + ) + (net /3V3_MODEM + (wire + (path F.Cu 10000 + 1786920 -1023231 + 1786920 -1023230 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1786920 -1040390 + 1786920 -1023231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1786917 -1023231 + 1786920 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 1986917 -1023231 + 1986919 -1023231 + 1986920 -1023230 + ) + ) + (wire + (path In2.Cu 10000 + 1741918 -748232 + 1741920 -748231 + ) + (type protect) + ) + (wire + (path In2.Cu 10000 + 1760670 -1040390 + 1760670 -1002980 + 1728120 -970431 + 1728120 -762029 + 1741918 -748232 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1741917 -748231 + 1741918 -748232 + ) + ) + (wire + (path In1.Cu 2000 + 1741917 -748231 + 1751684 -748231 + ) + ) + (wire + (path In1.Cu 2000 + 1965417 -868231 + 1871684 -868231 + 1751684 -748231 + ) + ) + (wire + (path F.Cu 2000 + 1715917 -1183231 + 1715919 -1183231 + 1715920 -1183230 + ) + ) + (wire + (path F.Cu 2000 + 1824916 -1223230 + 1824917 -1223231 + ) + ) + (wire + (path F.Cu 10000 + 1824916 -1223230 + 1824920 -1223230 + 1860440 -1187710 + 2004440 -1187710 + 2074720 -1117430 + 2052710 -1095430 + 2001950 -1095430 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1715920 -1183230 + 1732930 -1183230 + 1772930 -1223230 + 1824916 -1223230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1760670 -1040390 + (type protect) + ) + (wire + (path F.Cu 10000 + 1986920 -1023230 + 1989040 -1023230 + 2001950 -1036140 + 2001950 -1095430 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1786920 -1040390 + 1793430 -1040390 + 1863360 -1110330 + 1896630 -1110330 + 1911530 -1095430 + 2001950 -1095430 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1786920 -1040390 + 1760670 -1040390 + ) + (type protect) + ) + ) + (net /DOUT_4G + (wire + (path B.Cu 2000 + 1457320 -813231 + 1457317 -813231 + ) + ) + (wire + (path B.Cu 2000 + 1457320 -813231 + 1468330 -813231 + 1468330 -811854 + 1511960 -768231 + 1741917 -768231 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1741917 -768231 + 1741920 -768231 + ) + (type protect) + ) + ) + (net /MODEM_RST + (wire + (path F.Cu 2000 + 1443000 -1356000 + 1443000 -1347983 + ) + ) + (wire + (path F.Cu 2000 + 1443000 -1347983 + 1439916 -1344899 + 1439916 -1313028 + 1441971 -1310973 + ) + ) + (wire + (path In1.Cu 2000 + 1441971 -1310973 + 1443695 -1309249 + 1443695 -1281050 + 1602770 -1121975 + 1602770 -944986 + 1719525 -828231 + 1741917 -828231 + ) + ) + (via "Via[0-3]_600:300_um" 1441971 -1310973 + ) + ) + (net /USB_VBUS + (wire + (path In1.Cu 2000 + 1662750 -1294250 + 1662750 -1147249 + 1767037 -1042962 + 1767037 -873351 + 1741917 -848231 + ) + ) + (wire + (path In1.Cu 2000 + 1662750 -1307750 + 1662750 -1294250 + ) + ) + (wire + (path In1.Cu 2000 + 1662750 -1307750 + 1662750 -1308563 + 1656726 -1314587 + 1625975 -1314587 + 1620250 -1308862 + 1620250 -1307750 + ) + ) + (wire + (path In1.Cu 2000 + 1620250 -1307750 + 1620250 -1294250 + ) + ) + ) + (net /USB_DP + (wire + (path In1.Cu 2000 + 1741917 -868231 + 1635483 -974665 + 1635483 -1292483 + 1637250 -1294250 + ) + ) + (wire + (path In2.Cu 2000 + 1645750 -1307750 + 1645750 -1306451 + 1637250 -1297951 + 1637250 -1294250 + ) + ) + ) + (net /USB_DM + (wire + (path In1.Cu 2000 + 1645750 -1294250 + 1647517 -1292483 + 1647517 -1108894 + 1731669 -1024742 + 1731669 -898479 + 1741917 -888231 + ) + ) + (wire + (path In1.Cu 2000 + 1637250 -1307750 + 1637250 -1306452 + 1645750 -1297952 + 1645750 -1294250 + ) + ) + ) + (net /VEH5V + (wire + (path F.Cu 2000 + 1010417 -1073231 + 1010419 -1073231 + 1010420 -1073230 + ) + ) + (wire + (path F.Cu 15000 + 1040418 -1023232 + 1013070 -1050580 + 1013070 -1070580 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1013330 -960672 + 1040420 -987762 + 1040420 -1023230 + 1040418 -1023232 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1040417 -1023231 + 1040418 -1023232 + ) + ) + (wire + (path F.Cu 2000 + 1020917 -1123231 + 1020920 -1123231 + 1020920 -1123230 + ) + ) + (wire + (path F.Cu 2000 + 1116417 -973231 + 1116420 -973231 + ) + ) + (wire + (path In2.Cu 15000 + 1271920 -463231 + 1271920 -465858 + 1309050 -502988 + 1531140 -502988 + 1629240 -601094 + 1629240 -751564 + 1667980 -790303 + ) + (type protect) + ) + (wire + (path In2.Cu 15000 + 1028760 -807228 + 1028760 -782264 + 1032170 -778850 + 1032170 -764752 + 1029870 -762449 + 1029870 -762448 + 1032280 -760038 + 1032280 -749668 + 1028760 -746147 + 1028760 -518277 + 1079670 -467365 + 1079670 -464927 + 1100910 -443686 + 1252370 -443686 + 1271920 -463231 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1271917 -463231 + 1271920 -463231 + ) + ) + (wire + (path F.Cu 10018 + 992417 -983230 + 992416 -983231 + ) + (type protect) + ) + (wire + (path F.Cu 10018 + 996904 -967910 + 996904 -978743 + 992417 -983230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 992417 -983231 + 992417 -983230 + ) + ) + (wire + (path F.Cu 15000 + 987292 -883231 + 991048 -879475 + 991048 -828325 + 1012140 -807228 + 1028760 -807228 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1013850 -940598 + 1013850 -909791 + 987291 -883231 + 987292 -883231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 987292 -883231 + ) + ) + (wire + (path F.Cu 9998 + 1661920 -803231 + 1667980 -797167 + 1667980 -790303 + ) + (type protect) + ) + (wire + (path F.Cu 9998 + 1661920 -800707 + 1661920 -803231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1661917 -803231 + 1661920 -803231 + ) + ) + (wire + (path F.Cu 2000 + 1236920 -943231 + 1237020 -943131 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1246920 -943031 + 1246720 -943231 + 1236920 -943231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236917 -943231 + 1236920 -943231 + ) + ) + (wire + (path B.Cu 2000 + 1271917 -463228 + 1271917 -463231 + ) + ) + (wire + (path B.Cu 2000 + 1271917 -463228 + 1271920 -463231 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1179520 -948031 + 1124620 -1002930 + 1108720 -1002930 + 1060420 -954631 + 1060420 -919031 + 877416 -736031 + 913416 -700031 + 913416 -657231 + 936416 -634231 + 936416 -424331 + 1233020 -424331 + 1271917 -463228 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197917 -953231 + 1197920 -953231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1179520 -948031 + 1180280 -948031 + 1180700 -947612 + 1184700 -947612 + 1190320 -953231 + 1197917 -953231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1028760 -807228 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1667980 -790303 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1246920 -943031 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1179520 -948031 + (type protect) + ) + (wire + (path B.Cu 2000 + 1246920 -943031 + 1246620 -943331 + 1245920 -943331 + 1245720 -943131 + 1244520 -943131 + 1241020 -939631 + 1239320 -939631 + 1227820 -951131 + 1182840 -951131 + 1179740 -948031 + 1179520 -948031 + ) + (type protect) + ) + (wire + (path F.Cu 8014 + 1013070 -1073230 + 1013070 -1070580 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1020920 -1123230 + 1020920 -1088570 + 1021910 -1087580 + ) + (type protect) + ) + (wire + (path F.Cu 8014 + 1021910 -1087580 + 1013070 -1078740 + 1013070 -1073230 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 996904 -967910 + 1004140 -960672 + 1013330 -960672 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1116420 -973231 + 1116420 -972914 + 1084100 -940598 + 1013850 -940598 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1013850 -940598 + 1013850 -960147 + 1013330 -960672 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1013070 -1073230 + 1010420 -1073230 + ) + (type protect) + ) + ) + (net /LED_A + (wire + (path In2.Cu 2000 + 2101667 -708231 + 2101670 -708231 + ) + ) + (wire + (path F.Cu 2000 + 1010995 -1162935 + 1010996 -1162935 + 1011292 -1163231 + ) + ) + (wire + (path F.Cu 2000 + 1010995 -1162935 + 1010700 -1162640 + 1010700 -1150900 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1011290 -1163230 + 1010995 -1162935 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 986917 -1073231 + 986916 -1073230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 997899 -1074260 + 987946 -1074260 + 986917 -1073231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 997899 -1074260 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1010700 -1150900 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1773690 -1074260 + (type protect) + ) + (wire + (path In2.Cu 2000 + 2101670 -708231 + 2101670 -708252 + 2060210 -749706 + 2060210 -807718 + 1969700 -898231 + 1949720 -898231 + 1773690 -1074260 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1010700 -1150900 + 997899 -1138090 + 997899 -1074260 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 997899 -1074260 + 1773690 -1074260 + ) + (type protect) + ) + ) + (net USART1_RX + (wire + (path In2.Cu 2000 + 1289720 -813231 + 1289720 -802214 + 1285500 -802214 + 1278715 -795429 + ) + (type protect) + ) + (wire + (path In1.Cu 2000 + 1289120 -855006 + 1285690 -858436 + 1285690 -924415 + ) + ) + (via "Via[0-3]_600:300_um" 1289120 -855006 + ) + (wire + (path In2.Cu 2000 + 1278715 -795429 + 1278715 -808652 + 1278700 -808667 + 1278700 -817795 + 1278715 -817810 + 1278715 -841429 + 1289120 -851834 + 1289120 -855006 + ) + ) + (wire + (path In2.Cu 2000 + 1278715 -795429 + 1224320 -741031 + 1136520 -653231 + 1136520 -488631 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1100920 -1122740 + 1100917 -1122743 + 1100917 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1100920 -1122740 + 1100920 -1123230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1107770 -1115390 + 1100920 -1122250 + 1100920 -1122740 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1107770 -1115390 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1285690 -924415 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1660400 -759293 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1161920 -463231 + 1159640 -463231 + 1136520 -486355 + 1136520 -488631 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1107770 -1115390 + 1115580 -1123200 + 1268660 -1123200 + 1285690 -1106160 + 1285690 -924415 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1111920 -488631 + 1136520 -488631 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1892840 -558656 + 1879820 -558656 + 1679190 -759293 + 1660400 -759293 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1295230 -813231 + 1285690 -822762 + 1285690 -924415 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1295230 -813231 + 1300730 -813231 + 1354670 -759293 + 1660400 -759293 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1289720 -813231 + 1295230 -813231 + ) + (type protect) + ) + ) + (net 3V3 + (wire + (path In2.Cu 2000 + 1160418 -1191678 + 1160418 -1190237 + 1160403 -1190222 + 1160403 -1185238 + 1164422 -1181219 + 1164422 -1136355 + 1169167 -1131610 + 1169167 -1131010 + ) + ) + (wire + (path In2.Cu 2000 + 1177920 -1295830 + 1177920 -1209180 + 1160418 -1191678 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1169167 -1131010 + 1233140 -1131010 + 1240920 -1123230 + 1240920 -1120810 + 1250930 -1110790 + 1319030 -1110790 + 1321420 -1113180 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1117420 -1123230 + 1140920 -1123230 + 1148690 -1131010 + 1169167 -1131010 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1169167 -1131010 + ) + (wire + (path In2.Cu 2000 + 1160418 -1191678 + 991968 -1023230 + 991261 -1023230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1117420 -1123230 + 1117418 -1123230 + 1117417 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 1000416 -1023230 + 1000417 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 1000416 -1023230 + 991261 -1023230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 970416 -1073230 + 1000750 -1042900 + 1000750 -1023570 + 1000420 -1023230 + 1000416 -1023230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 945844 -463231 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1321420 -1113180 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1530570 -969998 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1334300 -1035860 + (type protect) + ) + (via "Via[0-3]_600:300_um" 991261 -1023230 + (type protect) + ) + (via "Via[0-3]_600:300_um" 941491 -844016 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1344920 -988200 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1321420 -1113180 + 1321420 -1048740 + 1334300 -1035860 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 941491 -844016 + 941491 -763622 + 970926 -734187 + 970926 -717422 + 902479 -648975 + 902479 -506595 + 945844 -463231 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1503720 -563231 + 1520920 -546026 + 1553620 -546026 + 1566460 -558869 + 1566460 -606433 + 1563300 -609594 + 1563300 -612934 + 1558540 -617694 + 1549070 -617694 + 1524850 -641909 + 1524850 -711368 + 1554520 -741031 + 1526790 -768756 + 1526790 -945225 + 1530570 -948999 + 1530570 -969998 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 941491 -844016 + 941491 -978435 + 986288 -1023230 + 991261 -1023230 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1334300 -1035860 + 1344920 -1025240 + 1344920 -988200 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1344920 -988200 + 1352450 -995730 + 1504830 -995730 + 1530570 -969998 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1344920 -988200 + 1344920 -993730 + 1340420 -998231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1321420 -1113180 + 1321420 -1131470 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1177920 -1295830 + 1177920 -1284810 + 1243400 -1219330 + 1243400 -1187230 + 1254430 -1187230 + 1260450 -1193250 + 1298710 -1193250 + 1301920 -1190040 + 1301920 -1186260 + 1304950 -1183230 + 1309040 -1183230 + 1309040 -1183000 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1309040 -1183000 + 1313160 -1183000 + 1321420 -1174740 + 1321420 -1131470 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1280920 -1123230 + 1302650 -1144960 + 1302650 -1180720 + 1304930 -1183000 + 1309040 -1183000 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1341670 -1043230 + 1334300 -1035860 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1361420 -1123230 + 1353180 -1131470 + 1321420 -1131470 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 935416 -833231 + 935416 -837941 + 941491 -844016 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 981916 -463231 + 945844 -463231 + ) + (type protect) + ) + ) + (net /24V_IN + (wire + (path F.Cu 10000 + 890417 -618231 + 892569 -620384 + 910706 -620384 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 914516 -543231 + 890416 -567331 + 890416 -618231 + 890417 -618231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 890417 -618231 + ) + ) + (wire + (path In2.Cu 2000 + 1726917 -1338231 + 1726919 -1338231 + 1726920 -1338230 + ) + ) + (via "Via[0-3]_600:300_um" 910706 -620384 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1726920 -1338230 + 1726920 -1336360 + 1295690 -905127 + 1250480 -905127 + 1248520 -907086 + 1244690 -903260 + 1236400 -903260 + 1232390 -907269 + 1189960 -907269 + 1186260 -903564 + 1108780 -903564 + 1037430 -832208 + 1033210 -832208 + 991599 -790596 + 991599 -776544 + 990844 -775789 + 990844 -700522 + 910706 -620384 + ) + (type protect) + ) + ) + (net COMP_FAN + (wire + (path F.Cu 2000 + 1758418 -477982 + 1739780 -496616 + 1739780 -502109 + 1720960 -520931 + 1716920 -520931 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1758420 -477981 + 1758418 -477982 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1758417 -477981 + 1758418 -477982 + ) + ) + ) + (net /BASE_LS + (wire + (path F.Cu 2000 + 1646917 -593231 + 1646920 -593231 + ) + ) + (wire + (path F.Cu 2000 + 1458167 -633731 + 1458170 -633731 + ) + ) + (wire + (path F.Cu 2000 + 1555630 -611613 + 1480280 -611613 + 1458170 -633731 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1555630 -611613 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1645010 -603251 + (type protect) + ) + (wire + (path B.Cu 2000 + 1555630 -611613 + 1559490 -615477 + 1605300 -615477 + 1617520 -603251 + 1645010 -603251 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1646920 -593231 + 1646920 -601348 + 1645010 -603251 + ) + (type protect) + ) + ) + (net /FB_FAN + (wire + (path F.Cu 2000 + 1746920 -453231 + 1746917 -453231 + ) + ) + (wire + (path F.Cu 2000 + 1762667 -453231 + 1746920 -453231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1722070 -503079 + 1722069 -503079 + 1716917 -508231 + ) + ) + (wire + (path F.Cu 2000 + 1722070 -503079 + 1727220 -497927 + 1733720 -497927 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1716920 -508231 + 1722070 -503079 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1775450 -463021 + 1765660 -453231 + 1762667 -453231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1733720 -497927 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1775450 -463021 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1733720 -497927 + 1740550 -497927 + 1775450 -463021 + ) + (type protect) + ) + ) + (net FAN_TACH_RAW + (wire + (path F.Cu 2000 + 966054 -1028870 + 960417 -1023233 + 960417 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 966054 -1028870 + 971692 -1034510 + 994734 -1034510 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 960416 -1023230 + 966054 -1028870 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1756840 -984594 + (type protect) + ) + (via "Via[0-3]_600:300_um" 994734 -1034510 + (type protect) + ) + (wire + (path In2.Cu 2000 + 2101920 -543231 + 2101920 -554748 + 2106430 -554748 + 2114850 -563168 + 2114850 -632128 + 2084600 -662380 + 2084600 -703130 + 1969500 -818231 + 1923200 -818231 + 1756840 -984594 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 994734 -1034510 + 1007000 -1022240 + 1719200 -1022240 + 1756840 -984594 + ) + (type protect) + ) + ) + (net FAN_TACH + (wire + (path F.Cu 2000 + 1016919 -1023229 + 1008910 -1015220 + 984926 -1015220 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1016920 -1023230 + 1016919 -1023229 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1016917 -1023231 + 1016919 -1023229 + ) + ) + (wire + (path F.Cu 2000 + 976917 -1023229 + 976917 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 984926 -1015220 + 976917 -1023229 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 976917 -1023229 + 976916 -1023230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 983739 -1012170 + (type protect) + ) + (via "Via[0-3]_600:300_um" 966326 -786711 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1476610 -690440 + (type protect) + ) + (wire + (path In2.Cu 2000 + 983739 -1012170 + 966326 -994762 + 966326 -786711 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1478320 -563231 + 1478320 -688736 + 1476610 -690440 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1476610 -690440 + 1156670 -690440 + 1110020 -737089 + 1110020 -744650 + 1072000 -782671 + 988662 -782671 + 984622 -786711 + 966326 -786711 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 984926 -1015220 + 984926 -1012170 + 983739 -1012170 + ) + (type protect) + ) + ) + (net BST_FAN + (wire + (path F.Cu 2000 + 1676417 -453231 + 1676420 -453231 + ) + ) + (wire + (path F.Cu 2000 + 1676420 -453231 + 1683950 -460762 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1667420 -554415 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1683950 -460762 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1667420 -554415 + 1667420 -477292 + 1683950 -460762 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1667420 -546331 + 1667420 -554415 + ) + (type protect) + ) + ) + (net /USART1_TX + (wire + (path In2.Cu 2000 + 1111920 -463231 + 1111920 -474748 + 1109040 -474748 + 1100400 -483385 + 1100400 -535979 + 1110620 -546196 + 1110620 -652731 + 1198920 -741031 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1198917 -741031 + 1198920 -741031 + ) + ) + (wire + (path In2.Cu 2000 + 1111917 -463231 + 1111920 -463231 + ) + ) + (wire + (path B.Cu 2000 + 1198920 -741031 + 1214280 -725668 + 1706030 -725668 + 1815260 -616446 + 1885850 -616446 + 1936440 -565856 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1936440 -565856 + 1936442 -565856 + 1943642 -558656 + ) + ) + (wire + (path B.Cu 2000 + 1936440 -565856 + 1943640 -558656 + ) + (type protect) + ) + ) + (net /SW_BAT + (wire + (path F.Cu 2000 + 1637920 -983430 + 1637917 -983433 + 1637917 -1048231 + ) + ) + (wire + (path F.Cu 15000 + 1637920 -983430 + 1637920 -918631 + ) + (type protect) + ) + (wire + (path F.Cu 15000 + 1637920 -1048230 + 1637920 -983430 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1217420 -918731 + 1217417 -918731 + ) + ) + (wire + (path F.Cu 2502 + 1222417 -918731 + 1217420 -918731 + ) + (type protect) + ) + (wire + (path F.Cu 2502 + 1222420 -886331 + 1222420 -918731 + 1222417 -918731 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1313190 -835427 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1637920 -918631 + (type protect) + ) + (wire + (path B.Cu 15000 + 1313190 -835427 + 1340900 -835427 + 1424110 -918630 + 1637920 -918630 + 1637920 -918631 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1222420 -886331 + 1273320 -835427 + 1313190 -835427 + ) + (type protect) + ) + ) + (net /BATLED3 + (wire + (path F.Cu 2000 + 1122717 -741031 + 1122720 -741031 + ) + ) + (wire + (path F.Cu 2000 + 2013445 -484078 + 2012600 -484925 + 2000070 -484925 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2014290 -483231 + 2013445 -484078 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2013445 -484078 + 2014292 -483231 + ) + ) + (via "Via[0-3]_600:300_um" 2000070 -484925 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1665270 -752604 + (type protect) + ) + (wire + (path In2.Cu 2000 + 2000070 -484925 + 1997410 -482260 + 1935610 -482260 + 1665270 -752604 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1122720 -741031 + 1134290 -752604 + 1665270 -752604 + ) + (type protect) + ) + ) + (net /BLED3 + (wire + (path F.Cu 2000 + 2031917 -443231 + 2031920 -443231 + ) + ) + (wire + (path F.Cu 2000 + 2030790 -463793 + 2030792 -463795 + 2030792 -483231 + ) + ) + (wire + (path F.Cu 2000 + 2030790 -463793 + 2030790 -483231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2031920 -443231 + 2030790 -444356 + 2030790 -463793 + ) + (type protect) + ) + ) + (net /CLPROG_TP + (wire + (path F.Cu 2000 + 1131920 -1066835 + 1131917 -1066838 + 1131917 -1073231 + ) + ) + (wire + (path F.Cu 2000 + 1131920 -1066835 + 1131920 -1073230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1131920 -1060440 + 1131920 -1066835 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197917 -938231 + 1150260 -938231 + 1146470 -942022 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197920 -938231 + 1197917 -938231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1131920 -1060440 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1146470 -942022 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1131920 -1060440 + 1128990 -1057520 + 1128990 -941265 + 1131980 -938271 + 1142710 -938271 + 1146470 -942022 + ) + (type protect) + ) + ) + (net /BATLED4 + (wire + (path F.Cu 2000 + 1148117 -741031 + 1148120 -741031 + ) + ) + (wire + (path F.Cu 2000 + 2045045 -492476 + 2045047 -492476 + 2054292 -483231 + ) + ) + (wire + (path F.Cu 2000 + 2045045 -492476 + 2021530 -515991 + 1836450 -515991 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2054290 -483231 + 2045045 -492476 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1836450 -515991 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1698310 -655975 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1698310 -655975 + 1836450 -517837 + 1836450 -515991 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1148120 -741031 + 1169640 -719503 + 1578230 -719503 + 1641760 -655975 + 1698310 -655975 + ) + (type protect) + ) + ) + (net /BLED4 + (wire + (path F.Cu 2000 + 2071918 -443232 + 2070790 -444356 + 2070790 -463793 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2071920 -443231 + 2071918 -443232 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 2071917 -443231 + 2071918 -443232 + ) + ) + (wire + (path F.Cu 2000 + 2070790 -463793 + 2070792 -463795 + 2070792 -483231 + ) + ) + (wire + (path F.Cu 2000 + 2070790 -463793 + 2070790 -483231 + ) + (type protect) + ) + ) + (net /USB_CC1 + (wire + (path F.Cu 2000 + 1628750 -1294250 + 1628750 -1270250 + 1614250 -1255750 + ) + ) + ) + (net EXT_LED + (wire + (path F.Cu 2000 + 947310 -1121835 + 945917 -1123228 + 945917 -1123231 + ) + ) + (wire + (path F.Cu 2000 + 947310 -1121835 + 948704 -1120440 + 948704 -1055760 + 941669 -1048730 + 918166 -1048730 + 918166 -1047790 + 910968 -1040600 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 945916 -1123230 + 947310 -1121835 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 910968 -1040600 + (type protect) + ) + (via "Via[0-3]_600:300_um" 929294 -686118 + (type protect) + ) + (wire + (path In2.Cu 2000 + 910968 -1040600 + 910968 -704444 + 929294 -686118 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 929294 -686118 + 1092410 -686118 + 1210430 -568095 + 1210430 -560088 + 1223090 -547430 + 1386320 -547430 + 1402120 -563231 + ) + (type protect) + ) + ) + (net /F0_SEL + (wire + (path F.Cu 2000 + 1413920 -992972 + 1413917 -992975 + 1413917 -998231 + ) + ) + (wire + (path F.Cu 2000 + 1413920 -992972 + 1413920 -987714 + 1415410 -987714 + 1417430 -985695 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1413920 -998231 + 1413920 -992972 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236920 -953231 + 1236917 -953231 + ) + ) + (wire + (path F.Cu 2000 + 1248320 -959231 + 1246960 -957879 + 1246960 -957331 + 1242860 -953231 + 1236920 -953231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1248320 -959331 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1417430 -985695 + (type protect) + ) + (wire + (path B.Cu 2000 + 1248320 -959331 + 1247520 -958531 + 1247520 -956831 + 1248020 -956331 + 1250720 -956331 + 1250790 -956259 + 1253650 -956259 + 1263440 -946467 + 1277570 -946467 + 1280020 -948925 + 1294140 -948925 + 1295340 -950128 + 1313600 -950128 + 1318810 -944923 + 1362590 -944923 + 1362600 -944911 + 1370910 -944911 + 1370920 -944923 + 1375790 -944923 + 1416570 -985695 + 1417430 -985695 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1248320 -959231 + 1247020 -957931 + 1247020 -957231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1248320 -959331 + 1248320 -959231 + ) + (type protect) + ) + ) + (net /LED_K + (wire + (path F.Cu 2000 + 992542 -1163231 + 1002580 -1173270 + 1067500 -1173270 + 1109690 -1131080 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 936916 -1058230 + 936916 -1066350 + 906639 -1096620 + 906639 -1168340 + 909911 -1171610 + 984164 -1171610 + 992541 -1163230 + 992542 -1163231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 992542 -1163231 + ) + ) + (wire + (path In2.Cu 2000 + 2101667 -683231 + 2101670 -683231 + ) + ) + (via "Via[0-3]_600:300_um" 1109690 -1131080 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1739470 -1080330 + (type protect) + ) + (wire + (path In2.Cu 2000 + 2101670 -683231 + 2101670 -694748 + 2093830 -694748 + 2088620 -699964 + 2088620 -715620 + 1977610 -826631 + 1977610 -870542 + 1969920 -878231 + 1941570 -878231 + 1739470 -1080330 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1109690 -1131080 + 1133600 -1107180 + 1318510 -1107180 + 1345360 -1080330 + 1739470 -1080330 + ) + (type protect) + ) + ) + (net /Q6_BASE + (wire + (path F.Cu 2000 + 1773670 -648231 + 1773670 -691481 + 1783667 -701478 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1822540 -623731 + 1798170 -623731 + 1773670 -648231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1773667 -648231 + 1773670 -648231 + ) + ) + (wire + (path F.Cu 2000 + 1783667 -701478 + 1783667 -701481 + ) + ) + (wire + (path F.Cu 2000 + 1783667 -701478 + 1783670 -701481 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1822540 -623731 + 1822542 -623731 + ) + ) + ) + (net /BATLED2 + (wire + (path B.Cu 2000 + 1097317 -741031 + 1097320 -741031 + ) + ) + (wire + (path F.Cu 2000 + 1971770 -485754 + 1974292 -483232 + 1974292 -483231 + ) + ) + (wire + (path F.Cu 2000 + 1971770 -485754 + 1969250 -488277 + 1960180 -488277 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1974290 -483231 + 1971770 -485754 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1816930 -609614 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1960180 -488277 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1960180 -488277 + 1938270 -488277 + 1816930 -609614 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1097320 -741031 + 1108830 -729514 + 1190690 -729514 + 1296700 -623511 + 1802500 -623511 + 1816390 -609614 + 1816930 -609614 + ) + (type protect) + ) + ) + (net /USB_CC2 + (wire + (path F.Cu 2000 + 1654250 -1307750 + 1654250 -1308466 + 1664903 -1319119 + 1688326 -1319119 + 1692406 -1315039 + 1692406 -1293048 + 1655108 -1255750 + 1654000 -1255750 + ) + ) + ) + (net /SW_IN + (wire + (path F.Cu 2000 + 1507730 -477670 + 1493292 -463232 + 1493292 -463231 + ) + ) + (wire + (path F.Cu 2000 + 1507730 -477670 + 1522170 -492109 + 1522170 -515505 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1493290 -463231 + 1507730 -477670 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1522170 -515505 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1530930 -644694 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1530930 -644694 + 1530930 -641774 + 1551000 -621711 + 1560210 -621711 + 1570480 -611436 + 1570480 -557206 + 1554870 -541596 + 1548260 -541596 + 1522170 -515505 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1530930 -644694 + 1533170 -646926 + 1533170 -652731 + ) + (type protect) + ) + ) + (net /PFI + (wire + (path F.Cu 2000 + 1056917 -1023231 + 1056919 -1023231 + 1056920 -1023230 + ) + ) + (wire + (path F.Cu 2000 + 1236917 -928231 + 1236920 -928231 + ) + ) + (wire + (path F.Cu 2000 + 1075416 -1023230 + 1075417 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 1075416 -1023230 + 1075420 -1023230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1065040 -1023230 + 1075416 -1023230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1076540 -823089 + (type protect) + ) + (wire + (path F.Cu 2000 + 1056920 -1023230 + 1065040 -1023230 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1065040 -972363 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1033280 -842225 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1240540 -913277 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1065040 -972363 + 1033280 -940603 + 1033280 -842225 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1076540 -823089 + 1078300 -824845 + 1152110 -824845 + 1240540 -913277 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1240540 -913277 + 1240540 -924603 + 1236920 -928231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1033280 -842225 + 1050580 -824925 + 1074710 -824925 + 1076540 -823089 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1065040 -1023230 + 1065040 -972363 + ) + (type protect) + ) + ) + (net /KCOIL + (wire + (path F.Cu 2000 + 1825881 -632360 + 1822542 -635699 + 1822542 -642731 + ) + ) + (via "Via[0-3]_600:300_um" 1825881 -632360 + ) + (wire + (path In1.Cu 2000 + 1943642 -584056 + 1912082 -615616 + 1842625 -615616 + 1825881 -632360 + ) + ) + ) + (net /BATLED1 + (wire + (path F.Cu 2000 + 1071917 -741031 + 1071920 -741031 + ) + ) + (wire + (path F.Cu 2000 + 1934290 -485011 + 1934292 -485009 + 1934292 -483231 + ) + ) + (wire + (path F.Cu 2000 + 1934290 -485011 + 1934290 -483231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1895630 -509974 + 1911110 -509974 + 1934290 -486791 + 1934290 -485011 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1641760 -649735 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1895630 -509974 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1895630 -509974 + 1743260 -662345 + 1654370 -662345 + 1641760 -649735 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1071920 -741031 + 1083430 -741031 + 1083430 -738152 + 1138630 -682954 + 1608540 -682954 + 1641760 -649735 + ) + (type protect) + ) + ) + (net /CHRG_EN + (wire + (path F.Cu 2000 + 1050417 -1073231 + 1050419 -1073231 + 1050420 -1073230 + ) + ) + (wire + (path B.Cu 2000 + 1173519 -741032 + 1161700 -752852 + 1062420 -752852 + 1050700 -741133 + 980826 -741133 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1173520 -741031 + 1173519 -741032 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1173517 -741031 + 1173518 -741031 + 1173519 -741032 + ) + ) + (wire + (path F.Cu 2000 + 1197917 -943231 + 1189920 -943231 + 1189820 -943331 + 1188520 -942031 + 1176420 -942031 + 1175220 -943231 + 1169440 -943231 + 1168310 -944362 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197920 -943231 + 1197917 -943231 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1054810 -1010510 + 1054810 -1009760 + 1130850 -933724 + 1157670 -933724 + 1168310 -944362 + ) + (type protect) + ) + (wire + (path In2.Cu 2000 + 1054810 -1063370 + 1054810 -1010510 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1054810 -1063370 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1168310 -944362 + (type protect) + ) + (via "Via[0-3]_600:300_um" 980826 -741133 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1054810 -1010510 + 1022370 -1010510 + 972424 -960558 + 972424 -749535 + 980826 -741133 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1050420 -1073230 + 1050420 -1067760 + 1054810 -1063370 + ) + (type protect) + ) + ) + (net /CHRG_STAT + (wire + (path In2.Cu 2000 + 1325917 -741031 + 1325920 -741031 + ) + ) + (wire + (path F.Cu 2000 + 1356920 -990044 + 1356917 -990047 + 1356917 -998231 + ) + ) + (wire + (path F.Cu 2000 + 1356920 -990044 + 1356920 -980134 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1356920 -998231 + 1356920 -990044 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1207420 -973534 + 1207417 -973531 + 1207417 -967731 + ) + ) + (wire + (path F.Cu 2000 + 1207420 -973534 + 1207420 -979338 + 1215630 -987552 + 1259890 -987552 + 1266650 -980794 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1207420 -967731 + 1207420 -973534 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1405430 -924798 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1266650 -980794 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1352320 -980134 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1325920 -741031 + 1395370 -810487 + 1395370 -914741 + 1405430 -924798 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1352320 -980134 + 1351660 -980794 + 1266650 -980794 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1356920 -980134 + 1356920 -973311 + 1405430 -924798 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1352320 -980134 + 1356920 -980134 + ) + (type protect) + ) + ) + (net /CHRG_FAULT + (wire + (path In2.Cu 2000 + 1351317 -741031 + 1351320 -741031 + ) + ) + (wire + (path F.Cu 2000 + 1358170 -1043230 + 1358168 -1043230 + 1358167 -1043231 + ) + ) + (wire + (path F.Cu 2000 + 1444110 -965597 + 1444110 -995476 + 1396350 -1043230 + 1358170 -1043230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1212420 -973194 + 1212417 -973191 + 1212417 -967731 + ) + ) + (wire + (path F.Cu 2000 + 1212420 -973194 + 1212420 -978657 + 1217290 -983534 + 1235830 -983534 + 1244700 -974660 + 1275600 -974660 + 1279340 -970917 + 1279340 -956755 + 1275070 -952484 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1212420 -967731 + 1212420 -973194 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1275070 -952484 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1444110 -965597 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1351320 -741031 + 1419220 -808931 + 1419220 -940704 + 1444110 -965597 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1444110 -965597 + 1444110 -967771 + 1420170 -991713 + 1414890 -991713 + 1372120 -948940 + 1369260 -948940 + 1369250 -948928 + 1364270 -948928 + 1364250 -948940 + 1322130 -948940 + 1316930 -954145 + 1276730 -954145 + 1275070 -952484 + ) + (type protect) + ) + ) + (net /BYP_CTRL + (wire + (path F.Cu 2000 + 1376717 -741031 + 1376720 -741031 + ) + ) + (wire + (path F.Cu 2000 + 1783667 -684981 + 1783670 -684981 + ) + ) + (wire + (path F.Cu 2000 + 1783670 -684981 + 1791640 -692958 + 1791640 -705451 + 1772920 -724178 + 1393570 -724178 + 1376720 -741031 + ) + (type protect) + ) + ) + (net Q10_GATE + (wire + (path F.Cu 2000 + 843667 -613231 + 843666 -613231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 982541 -603731 + 982541 -547217 + 946291 -510966 + 860981 -510966 + 851516 -520431 + 865878 -534792 + 865878 -591020 + 843667 -613231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 843667 -613231 + ) + ) + (wire + (path F.Cu 2000 + 982542 -603731 + 982541 -603731 + ) + ) + ) + (net 24V + (wire + (path F.Cu 2000 + 1001290 -618881 + 1001292 -618879 + 1001292 -613231 + ) + ) + (wire + (path F.Cu 10000 + 1001290 -618881 + 1001290 -613231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1001290 -624531 + 1001290 -618881 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 851516 -566031 + 832641 -584906 + 832641 -619782 + 850114 -637254 + 869916 -637254 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1599420 -574973 + 1592790 -581605 + 1592790 -619537 + 1594250 -621000 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1616920 -467731 + 1614170 -470481 + 1614170 -512231 + 1599420 -526977 + 1599420 -574973 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 869916 -637254 + 869916 -718231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1594250 -621000 + 1599520 -626264 + 1626000 -626264 + 1634660 -617597 + 1709300 -617597 + 1733670 -593231 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1599420 -574973 + 1618100 -574973 + 1646900 -546174 + 1646900 -540936 + 1651510 -536323 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 1001290 -624531 + 1039530 -662770 + 1552480 -662770 + 1594250 -621000 + ) + (type protect) + ) + (wire + (path F.Cu 6010 + 1651510 -536323 + 1664720 -536323 + 1667420 -533631 + ) + (type protect) + ) + (wire + (path F.Cu 10000 + 869916 -637254 + 988569 -637254 + 1001290 -624531 + ) + (type protect) + ) + ) + (net /PROG + (wire + (path F.Cu 2000 + 1119370 -1027180 + 1119366 -1027180 + 1115417 -1023231 + ) + ) + (wire + (path F.Cu 2000 + 1119370 -1027180 + 1115420 -1023230 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1139020 -1031130 + 1123320 -1031130 + 1119370 -1027180 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197920 -933231 + 1197917 -933231 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1135190 -944304 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1139020 -1031130 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1135190 -944304 + 1135190 -1027300 + 1139020 -1031130 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1197917 -933231 + 1146260 -933231 + 1135190 -944304 + ) + (type protect) + ) + ) + (net /VFB_BST + (wire + (path F.Cu 2000 + 1340420 -953231 + 1342400 -955211 + 1342400 -972004 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1356917 -913234 + 1340420 -929731 + 1340420 -953231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1340417 -953231 + 1340420 -953231 + ) + ) + (wire + (path F.Cu 2000 + 1217417 -967731 + 1217420 -967731 + ) + ) + (wire + (path F.Cu 2000 + 1236917 -933231 + 1236920 -933231 + ) + ) + (wire + (path F.Cu 2000 + 1356917 -913234 + 1356917 -913231 + ) + ) + (wire + (path F.Cu 2000 + 1356920 -913231 + 1356917 -913234 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1220030 -977517 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1304470 -928077 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1342400 -972004 + (type protect) + ) + (wire + (path In2.Cu 2000 + 1304470 -928077 + 1342400 -966003 + 1342400 -972004 + ) + (type protect) + ) + (wire + (path B.Cu 2000 + 1220030 -977517 + 1222810 -974737 + 1339660 -974737 + 1342400 -972004 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1217420 -967731 + 1217420 -974904 + 1220030 -977517 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236920 -933231 + 1299320 -933231 + 1304470 -928077 + ) + (type protect) + ) + ) + (net /F2_SEL + (wire + (path F.Cu 2000 + 1413917 -903231 + 1413920 -903231 + ) + ) + (wire + (path F.Cu 2000 + 1227417 -967731 + 1227420 -967731 + ) + ) + (wire + (path F.Cu 2000 + 1227420 -967731 + 1229660 -965484 + 1233830 -965484 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1366760 -954945 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1233830 -965484 + (type protect) + ) + (wire + (path B.Cu 2000 + 1233830 -965484 + 1261440 -965484 + 1268420 -958502 + 1363200 -958502 + 1366760 -954945 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1413920 -903231 + 1413920 -913748 + 1407950 -913748 + 1366760 -954945 + ) + (type protect) + ) + ) + (net /F1_SEL + (wire + (path F.Cu 2000 + 1413920 -950495 + 1413917 -950492 + 1413917 -948231 + ) + ) + (wire + (path F.Cu 2000 + 1413920 -950495 + 1413920 -948231 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1381360 -974662 + 1392010 -974662 + 1413920 -952759 + 1413920 -950495 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236920 -958231 + 1247220 -968536 + 1273210 -968536 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1236920 -958231 + 1236917 -958231 + ) + ) + (via "Via[0-3]_600:300_um" 1273210 -968536 + (type protect) + ) + (via "Via[0-3]_600:300_um" 1381360 -974662 + (type protect) + ) + (wire + (path B.Cu 2000 + 1273210 -968536 + 1276250 -965499 + 1372190 -965499 + 1381360 -974662 + ) + (type protect) + ) + ) + (net /PFO_TP + (wire + (path F.Cu 2000 + 1227420 -918314 + 1227417 -918317 + 1227417 -918731 + ) + ) + (wire + (path F.Cu 2000 + 1227420 -918314 + 1227420 -918731 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1276917 -873231 + 1272080 -873231 + 1227420 -917897 + 1227420 -918314 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1276920 -873231 + 1276917 -873231 + ) + (type protect) + ) + ) + (net FREQ_FAN + (wire + (path F.Cu 2000 + 1667420 -520931 + 1654230 -520931 + 1611360 -563802 + ) + (type protect) + ) + ) + (net IGN_IN + (wire + (path F.Cu 10000 + 1031125 -702438 + 1040330 -711646 + 1043450 -711646 + ) + (type protect) + ) + (wire + (path F.Cu 2000 + 1031125 -702438 + 1031124 -702438 + 1021917 -693231 + ) + ) + (wire + (path F.Cu 10000 + 1021920 -693231 + 1031125 -702438 + ) + (type protect) + ) + (via "Via[0-3]_600:300_um" 1043450 -711646 + (type protect) + ) + (wire + (path In2.Cu 10000 + 1043450 -711646 + 1046800 -714991 + 1046800 -784756 + 1043450 -788101 + 1043450 -817530 + 1104050 -878131 + 1326070 -878131 + 1423550 -975614 + 1464300 -975614 + 1826920 -1338230 + ) + (type protect) + ) + ) + ) + ) +) \ No newline at end of file diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.dsn b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.dsn index ad7fd47..204c807 100644 --- a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.dsn +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.dsn @@ -14,17 +14,35 @@ (index 0) ) ) - (layer B.Cu + (layer In1.Cu (type signal) (property (index 1) ) ) - (boundary - (path pcb 0 120000 -100000 0 -100000 0 0 120000 0 120000 -100000) + (layer In2.Cu + (type signal) + (property + (index 2) + ) ) - (plane GND (polygon B.Cu 0 0 0 120000 0 120000 -100000 0 -80000 0 0)) - (via "Via[0-1]_600:300_um") + (layer B.Cu + (type signal) + (property + (index 3) + ) + ) + (boundary + (path pcb 0 215192 -140323 80191.6 -140323 80191.6 -40323.1 215192 -40323.1 + 215192 -140323) + ) + (plane GND (polygon F.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (plane GND (polygon B.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (plane GND (polygon In1.Cu 0 214772 -40623.1 214862 -139723 80861.6 -139483 80761.6 -40553.1 + 80761.6 -40653.1 214772 -40623.1)) + (via "Via[0-3]_600:300_um" "Via[0-3]_800:400_um") (rule (width 200) (clearance 200) @@ -33,220 +51,234 @@ ) (placement (component Resistor_SMD:R_0603_1608Metric - (place R2 80300 -16600 front 0 (PN 10k)) - (place Ren2 98000 -20000 front 0 (PN 20k)) - (place R5 34000 -72000 front 0 (PN 10k)) - (place Rg 14000 -54000 front 0 (PN 100R)) - (place R31 68000 -72000 front 0 (PN 4.7k)) - (place Rfreq2 112000 -71000 front 0 (PN 100k)) - (place R3 17000 -68000 front 0 (PN 1k)) - (place R60 104000 -71000 front 0 (PN "100k/1%")) - (place Rdfu 50000 -72000 front 0 (PN 22k)) - (place R20 93900 -5000 front 0 (PN 100k)) - (place Rts 14000 -62000 front 0 (PN 1k)) - (place RB3 18000 -92500 front 0 (PN 330R)) - (place RB4 22000 -92500 front 0 (PN 330R)) - (place R61 108000 -71000 front 0 (PN "31.6k/1%")) - (place R1 69300 -12000 front 0 (PN 1k)) - (place R55 42000 -66000 front 0 (PN "10k/1%")) - (place Rled 14000 -72000 front 0 (PN 10k)) - (place Rgs 19000 -54000 front 0 (PN 100k)) - (place R41 99600 -27000 front 0 (PN 10k)) - (place RB2 14000 -92500 front 0 (PN 330R)) - (place Rtp 18000 -62000 front 0 (PN 10k)) - (place R30 64000 -72000 front 0 (PN 4.7k)) - (place R6 38000 -72000 front 0 (PN 10k)) - (place R52 46000 -62000 front 0 (PN "100k/1%")) - (place R56 46000 -66000 front 0 (PN 100k)) - (place R42 54000 -72000 front 0 (PN "10k/1%")) - (place R53 76000 -52000 front 0 (PN "499k/1%")) - (place R51 42000 -62000 front 0 (PN "287k/1%")) - (place Rcomp2 104000 -75000 front 0 (PN 40.2k)) - (place R58 76800 -64000 front 0 (PN 100k)) - (place Rrp 5000 -21000 front 0 (PN 10k)) - (place R21 96900 -5000 front 0 (PN 19.1k)) - (place R7 42000 -72000 front 0 (PN 10k)) - (place RB1 10000 -92500 front 0 (PN 330R)) - (place Ren1 94000 -19000 front 0 (PN 100k)) - (place R8 46000 -72000 front 0 (PN 10k)) - (place R54 76000 -56000 front 0 (PN "100k/1%")) - (place R57 76000 -60000 front 0 (PN 100k)) - (place R50 50000 -62000 front 0 (PN "825R/1%")) + (place R2 167366.65 -59323.1 front 0 (PN 10k)) + (place Ren2 178191.65 -59323.1 front 0 (PN 20k)) + (place R5 92241.65 -112323.1 front 0 (PN 10k)) + (place Rg 94191.65 -94323.1 front 0 (PN 100R)) + (place R31 128916.65 -112323.1 front 0 (PN 4.7k)) + (place Rfreq2 179516.65 -111823.1 front 0 (PN 100k)) + (place Rmled 203150 -87950 front 0 (PN 1k)) + (place R3 97866.65 -107323.1 front 0 (PN 1k)) + (place R60 179516.65 -102323.1 front 0 (PN "100k/1%")) + (place Rdfu 110916.65 -112323.1 front 0 (PN 22k)) + (place R20 173866.65 -45323.1 front 0 (PN 100k)) + (place Rts 96866.65 -102323.1 front 0 (PN 1k)) + (place RB3 202254.15 -48323.1 front 0 (PN 330R)) + (place RB4 206254.15 -48323.1 front 0 (PN 330R)) + (place R61 179516.65 -107323.1 front 0 (PN "31.6k/1%")) + (place R1 163866.65 -59323.1 front 0 (PN 1k)) + (place R55 101866.65 -107323.1 front 0 (PN "10k/1%")) + (place Rled 95416.65 -112323.1 front 0 (PN 10k)) + (place Rgs 99191.65 -94323.1 front 0 (PN 100k)) + (place R41 178191.65 -64823.1 front 0 (PN 10k)) + (place RB2 198254.15 -48323.1 front 0 (PN 330R)) + (place Rtp 100866.65 -102323.1 front 0 (PN 10k)) + (place R30 124916.65 -112323.1 front 0 (PN 4.7k)) + (place R6 98741.65 -112323.1 front 0 (PN 10k)) + (place R52 108366.65 -102323.1 front 0 (PN "100k/1%")) + (place R56 105866.65 -107323.1 front 0 (PN 100k)) + (place R42 114916.65 -112323.1 front 0 (PN "10k/1%")) + (place R53 134866.65 -91323.1 front 0 (PN "499k/1%")) + (place R51 104866.65 -102323.1 front 0 (PN "287k/1%")) + (place Rcomp2 179691.65 -116323.1 front 0 (PN 40.2k)) + (place R58 134991.65 -104323.1 front 0 (PN 100k)) + (place Rrp 85191.65 -61323.1 front 0 (PN 10k)) + (place R21 177091.65 -45323.1 front 0 (PN 19.1k)) + (place R7 102916.65 -112323.1 front 0 (PN 10k)) + (place RB1 194254.15 -48323.1 front 0 (PN 330R)) + (place Ren1 174191.65 -59323.1 front 0 (PN 100k)) + (place R8 106916.65 -112323.1 front 0 (PN 10k)) + (place R54 134866.65 -95323.1 front 0 (PN "100k/1%")) + (place R57 134866.65 -99823.1 front 0 (PN 100k)) + (place R50 112366.65 -102323.1 front 0 (PN "825R/1%")) ) (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" - (place P13 36000 -6000 front 0 (PN "MODO-B-UPLINK")) + (place P13 116191.65 -46323.1 front 0 (PN "MODO-B-UPLINK (DNP — harness alt)")) ) (component Resistor_SMD:R_0603_1608Metric::1 - (place Rigb 18000 -38000 front 90 (PN 10k)) - (place R40 107900 -29700 front 90 (PN 1k)) - (place Rfreq 80300 -13300 front 90 (PN 100k)) - (place Rig 15000 -38000 front 90 (PN 100R)) + (place Rigb 101366.65 -74323.1 front 180 (PN 10k)) + (place Rig 101366.65 -69323.1 front 180 (PN 100R)) ) (component Diode_SMD:D_SMA - (place Dbk 93400 -13400 front -90 (PN SS34)) + (place Dbk 168191.65 -65823.1 front -90 (PN SS34)) ) (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" - (place P6 8000 -53000 front -90 (PN FAN)) - (place P3 101000 -44000 front -90 (PN "RTK2B-UART1")) + (place P6 210191.65 -61823.1 front 90 (PN FAN)) ) (component LED_SMD:LED_0805_2012Metric - (place DB2 14000 -97000 front 0 (PN LED)) - (place DB1 10000 -97000 front 0 (PN LED)) - (place DB3 18000 -97000 front 0 (PN LED)) - (place DB4 22000 -97000 front 0 (PN LED)) - (place D1 18000 -72000 front 0 (PN LED)) + (place DB2 198254.15 -44323.1 front 0 (PN LED)) + (place DB1 194254.15 -44323.1 front 0 (PN LED)) + (place DB3 202254.15 -44323.1 front 0 (PN LED)) + (place DB4 206254.15 -44323.1 front 0 (PN LED)) + (place D1 100191.65 -116323.1 front 0 (PN LED)) + (place D4G 203100 -92100 front 0 (PN LED)) ) (component "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical::1" - (place P4 116000 -86000 front 90 (PN "BATT-1S4P+NTC")) + (place P4 210191.65 -108323.1 front 90 (PN "BATT-1S4P+NTC")) ) (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" - (place P10 8000 -74500 front -90 (PN "RESET-EXT")) - (place P8 8000 -66000 front -90 (PN PANEL_LED)) + (place P10 210166.65 -80073.1 front 90 (PN "RESET-EXT")) + (place P8 210166.65 -70823.1 front 90 (PN PANEL_LED)) ) (component Capacitor_SMD:C_0603_1608Metric - (place Ccomp 95650 -13150 front -90 (PN 2.2nF)) + (place Ccomp 175841.65 -53473.1 front -90 (PN 2.2nF)) ) (component "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" - (place U7 104000 -60000 front 180 (PN MP1584EN)) - (place U2 88000 -8000 front 180 (PN MP1584EN)) + (place U7 197621.65 -112573.1 front 180 (PN MP1584EN)) + (place U2 169216.65 -52728.1 front 180 (PN MP1584EN)) ) (component Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical - (place J1 27000 -16000 front 90 (PN "Blackpill-L")) - (place J2 27000 -33780 front 90 (PN "Blackpill-R")) + (place J1 107191.65 -56323.1 front 90 (PN "Blackpill-L")) + (place J2 107191.65 -74103.1 front 90 (PN "Blackpill-R")) ) (component Capacitor_SMD:C_0603_1608Metric::1 - (place Ccomp2 108000 -75000 front 0 (PN 2.2nF)) - (place Cu3 72000 -72000 front 0 (PN 100nF)) - (place C7 38000 -76000 front 0 (PN 100nF)) - (place Cbst2 103400 -66900 front 0 (PN 10nF)) - (place Cbst 88000 -11700 front 0 (PN 10nF)) - (place C9 21400 -43000 front 0 (PN 100nF)) - (place C11 83300 -10900 front 0 (PN 100nF)) - (place C31 42000 -58000 front 0 (PN 2.2uF)) - (place C5 34000 -76000 front 0 (PN 100nF)) - (place C24 58000 -72000 front 0 (PN 100nF)) - (place Cu4 76000 -72000 front 0 (PN 100nF)) + (place Ccomp2 187966.65 -114823.1 front 0 (PN 2.2nF)) + (place Cu3 132916.65 -112323.1 front 0 (PN 100nF)) + (place C7 96191.65 -116323.1 front 0 (PN 100nF)) + (place Cbst2 187916.65 -109823.1 front 0 (PN 10nF)) + (place Cbst 168416.65 -45323.1 front 0 (PN 10nF)) + (place C9 101591.65 -83323.1 front 0 (PN 100nF)) + (place C11 162191.65 -51223.1 front 0 (PN 100nF)) + (place C31 112416.65 -97323.1 front 0 (PN 2.2uF)) + (place C5 92191.65 -116323.1 front 0 (PN 100nF)) + (place C24 118916.65 -112323.1 front 0 (PN 100nF)) + (place Cu4 136916.65 -112323.1 front 0 (PN 100nF)) ) (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::1" - (place P11 55600 -6000 front 0 (PN "CUTOFF-SW")) - (place P2 47000 -6000 front 0 (PN "5V-IN-SD15B05")) + (place P11 135791.65 -46323.1 front 0 (PN "CUTOFF-SW")) + (place P2 127191.65 -46323.1 front 0 (PN "5V-IN-SD15B05")) ) (component "Package_TO_SOT_SMD:SOT-23" - (place Q1 64000 -12000 front 0 (PN AO3401A)) - (place Q5 60000 -12000 front 0 (PN MMBT3904)) - (place Q2 20000 -58000 front 0 (PN AO3400A)) - (place Q4 13000 -68000 front 0 (PN AO3400A)) - (place DzG 17000 -22000 front 0 (PN BZX84C15)) - (place Q6 108500 -22600 front 0 (PN MMBT3904)) + (place Q1 154254.15 -64323.1 front 0 (PN AO3401A)) + (place Q5 146754.15 -64323.1 front 0 (PN MMBT3904)) + (place Q2 106191.65 -96323.1 front 0 (PN AO3400A)) + (place Q4 92754.15 -105823.1 front 0 (PN AO3400A)) + (place DzG 99191.65 -61323.1 front 0 (PN BZX84C15)) + (place Q6 183191.65 -63323.1 front 0 (PN MMBT3904)) ) (component "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" - (place Q7 48000 -50000 front 0 (PN AO4406A)) + (place Q7 112716.65 -87228.1 front 0 (PN AO4406A)) ) (component Capacitor_SMD:C_0805_2012Metric - (place C34 72800 -64000 front 0 (PN 10uF)) - (place C35 72000 -56000 front 0 (PN 22uF)) - (place C30 42000 -54000 front 0 (PN 10uF)) - (place C23 97400 -10900 front 0 (PN 22uF/16V)) + (place C34 130991.65 -104323.1 front 0 (PN 10uF)) + (place C35 130191.65 -96323.1 front 0 (PN 22uF)) + (place C30 100191.65 -98323.1 front 0 (PN 10uF)) + (place C23 179741.65 -51223.1 front 0 (PN 22uF/16V)) ) (component "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" - (place U3 66000 -78000 front 0 (PN "SHT40-AD1B")) + (place U3 124191.65 -118323.1 front 0 (PN "SHT40-AD1B")) ) (component Capacitor_SMD:C_0805_2012Metric::1 - (place C40 99200 -62400 front -90 (PN 22uF)) - (place C41 117200 -65400 front -90 (PN 22uF)) + (place C40 179691.65 -96323.1 front -90 (PN 22uF)) + (place C41 198691.65 -103273.1 front -90 (PN 22uF)) ) (component Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical - (place J7 94500 -34000 front 0 (PN "XBEE-ROW-1 (VCC/DOUT/DIN)")) - (place J8 116850 -34000 front 0 (PN "XBEE-ROW-2")) + (place J7 174191.65 -74823.1 front 0 (PN "XBEE-ROW-1 (VCC/DOUT/DIN)")) + (place J8 196541.65 -74823.1 front 0 (PN "XBEE-ROW-2")) ) (component Diode_SMD:D_SMA::1 - (place D2 14000 -58000 front 0 (PN SS34)) - (place Dbk2 108300 -63500 front 0 (PN SS34)) + (place D2 94191.65 -98323.1 front 0 (PN SS34)) + (place Dbk2 188491.65 -103823.1 front 0 (PN SS34)) ) (component Resistor_SMD:R_1206_3216Metric - (place RS1 42000 -48000 front 0 (PN "8mR/1%")) + (place RS1 100191.65 -88323.1 front 0 (PN "8mR/1%")) ) (component MountingHole:MountingHole_3.2mm - (place MH3 5000 -95000 front 0 (PN MountingHole_3.2mm)) - (place MH4 115000 -95000 front 0 (PN MountingHole_3.2mm)) - (place MH2 115000 -5000 front 0 (PN MountingHole_3.2mm)) - (place MH1 5000 -5000 front 0 (PN MountingHole_3.2mm)) + (place MH3 85191.65 -135323.1 front 0 (PN MountingHole_3.2mm)) + (place MH4 211191.65 -135323.1 front 0 (PN MountingHole_3.2mm)) + (place MH2 211191.65 -45323.1 front 0 (PN MountingHole_3.2mm)) + (place MH1 85191.65 -45323.1 front 0 (PN MountingHole_3.2mm)) ) (component Diode_SMD:D_SMB - (place D10 11000 -21500 front 0 (PN SMBJ33A)) + (place D10 91191.65 -61823.1 front 0 (PN SMBJ33A)) ) (component Resistor_SMD:R_0603_1608Metric::2 - (place Rcomp 95650 -8300 front -90 (PN 40.2k)) + (place Rcomp 175841.65 -48623.1 front -90 (PN 40.2k)) + (place R40 178366.65 -69323.1 front -90 (PN 1k)) ) (component Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical - (place H3 31000 -6000 front 0 (PN "USART1-RSV")) + (place H3 111191.65 -46323.1 front 0 (PN "USART1-RSV (DNP)")) ) (component "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" - (place L6 65500 -53300 front 0 (PN 2.2uH/8A)) - (place L2 97700 -8000 front 0 (PN 10uH)) - (place L7 114000 -60000 front 0 (PN 10uH/2A)) + (place L6 167691.65 -104823.1 front 0 (PN 2.2uH/8A)) + (place L2 187291.65 -47823.1 front 0 (PN 10uH)) + (place L7 167691.65 -118323.1 front 0 (PN 10uH/2A)) ) (component "Package_TO_SOT_SMD:SOT-563" - (place U4 72000 -78000 front 0 (PN TMP102)) + (place U4 130191.65 -118323.1 front 0 (PN TMP102)) ) (component TestPoint:TestPoint_Pad_D1.5mm - (place TP1 54800 -66000 front 0 (PN CLPROG)) - (place TP2 66000 -45000 front 0 (PN PFO)) + (place TP1 113191.65 -107323.1 front 0 (PN CLPROG)) + (place TP2 127691.65 -87323.1 front 0 (PN PFO)) + ) + (component Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (place SW4G 148175 -135600 front 0 (PN RESET)) ) (component Capacitor_SMD:C_1210_3225Metric - (place C22 82900 -7500 front 90 (PN 22uF/50V)) + (place C22 161691.65 -45298.1 front 90 (PN 22uF/50V)) + ) + (component Resistor_SMD:R_0603_1608Metric::3 + (place Rcc1 161425 -124750 front 90 (PN 5.1k)) + (place Rcc2 165400 -124750 front 90 (PN 5.1k)) + (place Rfreq 161135.95 -55555.2 front 90 (PN 100k)) ) (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" - (place P5 18000 -6000 front 0 (PN TEMP_PROBE)) + (place P5 98191.65 -46323.1 front 0 (PN TEMP_PROBE)) ) (component "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" - (place JP4 72000 -20000 front 0 (PN F0:1)) - (place JP3 66000 -20000 front 0 (PN F1:0)) - (place JP2 60000 -20000 front 0 (PN "F2:Li-ion")) + (place JP4 141391.65 -99823.1 front 0 (PN F0:1)) + (place JP3 141391.65 -94823.1 front 0 (PN F1:0)) + (place JP2 141391.65 -90323.1 front 0 (PN "F2:Li-ion")) ) (component "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" - (place JP1 79400 -20000 front 0 (PN 0R)) + (place JP1 165541.65 -80323.1 front 0 (PN 0R)) ) (component "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical::2" - (place P12 108000 -90000 front 90 (PN "NTC-HOTSPOT")) + (place P12 210191.65 -121323.1 front 90 (PN "NTC-HOTSPOT")) ) (component Capacitor_SMD:C_1210_3225Metric::1 - (place C32 64000 -64000 front 0 (PN 47uF)) - (place C33 68800 -64000 front 0 (PN 47uF)) + (place C32 120666.65 -104323.1 front 0 (PN 47uF)) + (place C33 126166.65 -104323.1 front 0 (PN 47uF)) + ) + (component Connector_USB:USB_C_Receptacle_GCT_USB4085 + (place J9 161175 -129425 front 0 (PN "USB-C")) ) (component "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" - (place P1 8000 -26000 front -90 (PN "GX16-5")) + (place P1 172691.65 -133823.1 front 0 (PN "GX16-5")) ) (component Fuse:Fuse_1812_4532Metric - (place F1 70000 -6000 front 0 (PN "PPTC 3A")) + (place F1 147191.65 -46323.1 front 0 (PN "PPTC 3A")) ) (component "Relay_THT:Relay_SPDT_Omron_G5V-1" - (place K1 108000 -16000 front 0 (PN "G5V-1 DC5")) + (place K1 189284.15 -55865.6 front 0 (PN "G5V-1 DC5")) ) (component Capacitor_SMD:CP_Elec_6.3x7.7 - (place C43 106000 -81000 front 0 (PN 100uF/6.3V)) - (place C10 24500 -27000 front 0 (PN 47uF/50V)) - ) - (component Module:Arduino_UNO_R3 - (place MOD1 60000 -48000 front 0 (PN "simpleRTK2B-Pro-socket")) + (place C43 185191.65 -122323.1 front 0 (PN 100uF/6.3V)) + (place C10 89691.65 -71823.1 front 0 (PN 47uF/50V)) ) (component "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" - (place U6 58000 -58000 front 0 (PN LTC4040EUFD)) + (place U6 121741.65 -94323.1 front 0 (PN LTC4040EUFD)) ) (component "Package_TO_SOT_SMD:TO-252-2" - (place Q10 10000 -14000 front 0 (PN IRFR5305)) + (place Q10 90191.65 -54323.1 front 0 (PN IRFR5305)) ) (component Button_Switch_THT:SW_PUSH_6mm - (place SW1 10000 -86000 front 0 (PN RESET)) + (place SW1 199191.65 -133323.1 front 0 (PN RESET)) ) (component Capacitor_SMD:CP_Elec_6.3x7.7::1 - (place C3 74400 -12000 front 90 (PN 47uF)) + (place C3 154691.65 -48523.1 front 90 (PN 47uF)) ) (component "Diode_SMD:D_SOD-123" - (place D5 15000 -43000 front 0 (PN BAT54)) + (place D5 95191.65 -83323.1 front 0 (PN BAT54)) + ) + (component "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (place P3 210191.65 -95323.1 front 90 (PN "RTK2B-UART1 (DNP — harness alt)")) ) (component "Diode_SMD:D_SOD-123::1" - (place D6 112400 -22400 front 180 (PN 1N4148W)) + (place D6 199691.65 -61823.1 front 180 (PN 1N4148W)) + ) + (component Module:Arduino_UNO_R3 + (place MOD1 115251.65 -129583.1 back 180 (PN "simpleRTK2B-Pro on UNO female headers")) ) ) (library @@ -280,10 +312,10 @@ (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) ) (image Resistor_SMD:R_0603_1608Metric::1 - (outline (polygon signal 0 -1475 -725 -1475 725 1475 725 1475 -725)) - (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (polygon signal 0 -1475 725 1475 725 1475 -725 -1475 -725)) (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) - (outline (path signal 100 -800 412.5 -800 -412.5 800 -412.5 800 412.5 -800 412.5)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 100 -800 412.5 800 412.5 800 -412.5 -800 -412.5 -800 412.5)) (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) ) @@ -306,26 +338,26 @@ (pin RoundRect[T]Pad_2500.000000x1800.000000_250.951000_um_0.000000_0 2 2000 0) ) (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" - (outline (polygon signal 0 10445 2845 10445 -3895 -2945 -3895 -2945 2845)) - (outline (path signal 120 -1800 -2750 3750 -2750)) - (outline (path signal 120 9300 -2750 3750 -2750)) - (outline (path signal 120 -2550 200 -1800 200)) - (outline (path signal 120 -1800 200 -1800 -2750)) - (outline (path signal 120 9300 200 9300 -2750)) - (outline (path signal 120 10050 200 9300 200)) - (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (polygon signal 0 -2945 -3895 -2945 2845 10445 2845 10445 -3895)) (outline (path signal 120 -1600 2750 -2850 2750)) - (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) - (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) - (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) (outline (path signal 120 -2560 2460 -2560 -3510 10060 -3510 10060 2460 -2560 2460)) - (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) (outline (path signal 100 -2450 2350 -2450 -3400 9950 -3400 9950 2350 -2450 2350)) - (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) - (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) - (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) - (pin Oval[A]Pad_1700.000000x1950.000000_um 4 7500 0) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 (rotate 180) 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um (rotate 180) 4 7500 0) ) (image LED_SMD:LED_0805_2012Metric (outline (polygon signal 0 1675 -945 -1675 -945 -1675 945 1675 945)) @@ -362,24 +394,24 @@ (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) ) (image "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" - (outline (polygon signal 0 5445 2845 5445 -3895 -2945 -3895 -2945 2845)) - (outline (path signal 120 -1800 -2750 1250 -2750)) - (outline (path signal 120 4300 -2750 1250 -2750)) - (outline (path signal 120 -2550 200 -1800 200)) - (outline (path signal 120 -1800 200 -1800 -2750)) - (outline (path signal 120 4300 200 4300 -2750)) - (outline (path signal 120 5050 200 4300 200)) - (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (polygon signal 0 -2945 -3895 -2945 2845 5445 2845 5445 -3895)) (outline (path signal 120 -1600 2750 -2850 2750)) - (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) - (outline (path signal 120 750 2450 750 1700 1750 1700 1750 2450 750 2450)) - (outline (path signal 120 3250 2450 3250 1700 5050 1700 5050 2450 3250 2450)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 5050 200 4300 200)) + (outline (path signal 120 4300 200 4300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 4300 -2750 1250 -2750)) + (outline (path signal 120 -1800 -2750 1250 -2750)) (outline (path signal 120 -2560 2460 -2560 -3510 5060 -3510 5060 2460 -2560 2460)) - (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 120 3250 2450 3250 1700 5050 1700 5050 2450 3250 2450)) + (outline (path signal 120 750 2450 750 1700 1750 1700 1750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) (outline (path signal 100 -2450 2350 -2450 -3400 4950 -3400 4950 2350 -2450 2350)) - (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 1 0 0) - (pin Oval[A]Pad_1700.000000x2000.000000_um 2 2500 0) + (pin RoundRect[A]Pad_1700.000000x2000.000000_250.951000_um_0.000000_0 (rotate 180) 1 0 0) + (pin Oval[A]Pad_1700.000000x2000.000000_um (rotate 180) 2 2500 0) ) (image Capacitor_SMD:C_0603_1608Metric (outline (polygon signal 0 1475 725 1475 -725 -1475 -725 -1475 725)) @@ -526,10 +558,10 @@ (pin Rect[T]Pad_500.000000x300.000000_um 2 -700 -400) (pin Rect[T]Pad_500.000000x300.000000_um 3 700 -400) (pin Rect[T]Pad_500.000000x300.000000_um 4 700 400) - (keepout "" (polygon F.Cu 0 750 550 450 550 450 250 750 250 750 -250 450 -250 - 450 -550 750 -550 750 -750 -750 -750 -750 -550 -450 -550 - -450 -250 -750 -250 -750 250 -450 250 -450 550 -750 550 - -750 750 750 750 750 550)) + (keepout "" (polygon F.Cu 0 22750 550 22450 550 22450 250 22750 250 22750 -250 + 22450 -250 22450 -550 22750 -550 22750 -750 21250 -750 21250 -550 + 21550 -550 21550 -250 21250 -250 21250 250 21550 250 21550 550 + 21250 550 21250 750 22750 750 22750 550)) ) (image Capacitor_SMD:C_0805_2012Metric::1 (outline (polygon signal 0 1695 975 1695 -975 -1695 -975 -1695 975)) @@ -591,6 +623,8 @@ ) (image MountingHole:MountingHole_3.2mm (keepout "" (circle F.Cu 3700)) + (keepout "" (circle In1.Cu 3700)) + (keepout "" (circle In2.Cu 3700)) (keepout "" (circle B.Cu 3700)) ) (image Diode_SMD:D_SMB @@ -700,6 +734,21 @@ 789.896 527.792 877.686 363.549 931.746 185.336 950 0)) (pin Round[T]Pad_1500.000000_um 1 0 0) ) + (image Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS + (outline (polygon signal 0 3295 745 4745 745 4745 -745 3295 -745 3295 -2095 + -3295 -2095 -3295 -745 -4745 -745 -4745 745 -3295 745 -3295 2095 + 3295 2095)) + (outline (path signal 120 -3200 2000 -3200 800)) + (outline (path signal 120 -3200 -800 -3200 -2000)) + (outline (path signal 120 -3200 -2000 3200 -2000)) + (outline (path signal 120 3200 2000 -3200 2000)) + (outline (path signal 120 3200 800 3200 2000)) + (outline (path signal 120 3200 -2000 3200 -800)) + (outline (path signal 120 -1350 650 1350 650 1350 -650 -1350 -650 -1350 650)) + (outline (path signal 100 -3050 1850 3050 1850 3050 -1850 -3050 -1850 -3050 1850)) + (pin Rect[T]Pad_1250.000000x1000.000000_um 1 -3875 0) + (pin Rect[T]Pad_1250.000000x1000.000000_um 2 3875 0) + ) (image Capacitor_SMD:C_1210_3225Metric (outline (polygon signal 0 -2295 -1595 -2295 1595 2295 1595 2295 -1595)) (outline (path signal 120 -711.252 1360 711.252 1360)) @@ -708,6 +757,14 @@ (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 1 -1475 0) (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 2 1475 0) ) + (image Resistor_SMD:R_0603_1608Metric::3 + (outline (polygon signal 0 -1475 -725 -1475 725 1475 725 1475 -725)) + (outline (path signal 120 -237.258 522.5 237.258 522.5)) + (outline (path signal 120 -237.258 -522.5 237.258 -522.5)) + (outline (path signal 100 -800 412.5 -800 -412.5 800 -412.5 800 412.5 -800 412.5)) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 1 -825 0) + (pin RoundRect[T]Pad_800.000000x950.000000_200.761000_um_0.000000_0 2 825 0) + ) (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::1" (outline (polygon signal 0 10445 -3895 -2945 -3895 -2945 2845 10445 2845)) (outline (path signal 120 -2850 2750 -2850 1500)) @@ -838,89 +895,123 @@ (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 1 -1475 0) (pin RoundRect[T]Pad_1150.000000x2700.000000_250.951000_um_0.000000_0 2 1475 0) ) + (image Connector_USB:USB_C_Receptacle_GCT_USB4085 + (outline (polygon signal 0 8245 -9105 -2295 -9105 -2295 1055 8245 1055)) + (outline (path signal 120 -1620 -2400 -1620 -3300)) + (outline (path signal 120 -1620 -6000 -1620 -8730)) + (outline (path signal 120 -1620 -8730 7570 -8730)) + (outline (path signal 120 -1500 680 7450 680)) + (outline (path signal 120 7570 -2400 7570 -3300)) + (outline (path signal 120 7570 -6000 7570 -8730)) + (outline (path signal 100 -1500 560 -1500 -8610)) + (outline (path signal 100 -1500 560 7450 560)) + (outline (path signal 100 -1500 -8610 7450 -8610)) + (outline (path signal 100 -25 -6100 5975 -6100)) + (outline (path signal 100 7450 560 7450 -8610)) + (pin Round[A]Pad_700.000000_um A1 0 0) + (pin Round[A]Pad_700.000000_um A4 850 0) + (pin Round[A]Pad_700.000000_um A5 1700 0) + (pin Round[A]Pad_700.000000_um A6 2550 0) + (pin Round[A]Pad_700.000000_um A7 3400 0) + (pin Round[A]Pad_700.000000_um A8 4250 0) + (pin Round[A]Pad_700.000000_um A9 5100 0) + (pin Round[A]Pad_700.000000_um A12 5950 0) + (pin Round[A]Pad_700.000000_um B1 5950 -1350) + (pin Round[A]Pad_700.000000_um B4 5100 -1350) + (pin Round[A]Pad_700.000000_um B5 4250 -1350) + (pin Round[A]Pad_700.000000_um B6 3400 -1350) + (pin Round[A]Pad_700.000000_um B7 2550 -1350) + (pin Round[A]Pad_700.000000_um B8 1700 -1350) + (pin Round[A]Pad_700.000000_um B9 850 -1350) + (pin Round[A]Pad_700.000000_um B12 0 -1350) + (pin Oval[A]Pad_900.000000x2400.000000_um SH -1350 -980) + (pin Oval[A]Pad_900.000000x1700.000000_um SH@1 -1350 -4360) + (pin Oval[A]Pad_900.000000x2400.000000_um SH@2 7300 -980) + (pin Oval[A]Pad_900.000000x1700.000000_um SH@3 7300 -4360) + ) (image "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" - (outline (polygon signal 0 22995 5705 22995 -5095 -2995 -5095 -2995 5705)) + (outline (polygon signal 0 22995 -5095 -2995 -5095 -2995 5705 22995 5705)) + (outline (path signal 120 -2620 5320 22620 5320)) + (outline (path signal 120 -2620 2300 22620 2300)) + (outline (path signal 120 -2620 -2600 22620 -2600)) + (outline (path signal 120 -2620 -4100 22620 -4100)) (outline (path signal 120 -2620 -4720 -2620 5320)) (outline (path signal 120 -300 -4720 -2620 -4720)) - (outline (path signal 120 22620 -4720 300 -4720)) - (outline (path signal 120 -2620 -4100 22620 -4100)) - (outline (path signal 120 -2620 -2600 22620 -2600)) - (outline (path signal 120 -2620 2300 22620 2300)) - (outline (path signal 120 -2620 5320 22620 5320)) (outline (path signal 120 22620 5320 22620 -4720)) - (outline (path signal 100 -2000 -4600 -2500 -4100)) - (outline (path signal 100 22500 -4600 -2000 -4600)) - (outline (path signal 100 -2500 -4100 22500 -4100)) - (outline (path signal 100 -2500 -4100 -2500 5200)) - (outline (path signal 100 -2500 -2600 22500 -2600)) - (outline (path signal 100 1138 955 -955 -1138)) - (outline (path signal 100 6138 955 4045 -1138)) - (outline (path signal 100 11138 955 9045 -1138)) - (outline (path signal 100 16138 955 14045 -1138)) - (outline (path signal 100 21138 955 19045 -1138)) - (outline (path signal 100 955 1138 -1138 -955)) - (outline (path signal 100 5955 1138 3862 -955)) - (outline (path signal 100 10955 1138 8862 -955)) - (outline (path signal 100 15955 1138 13862 -955)) - (outline (path signal 100 20955 1138 18862 -955)) - (outline (path signal 100 -2500 2300 22500 2300)) + (outline (path signal 120 22620 -4720 300 -4720)) (outline (path signal 100 -2500 5200 22500 5200)) + (outline (path signal 100 -2500 2300 22500 2300)) + (outline (path signal 100 -2500 -2600 22500 -2600)) + (outline (path signal 100 -2500 -4100 -2500 5200)) + (outline (path signal 100 -2500 -4100 22500 -4100)) + (outline (path signal 100 -2000 -4600 -2500 -4100)) + (outline (path signal 100 955 1138 -1138 -955)) + (outline (path signal 100 1138 955 -955 -1138)) + (outline (path signal 100 5955 1138 3862 -955)) + (outline (path signal 100 6138 955 4045 -1138)) + (outline (path signal 100 10955 1138 8862 -955)) + (outline (path signal 100 11138 955 9045 -1138)) + (outline (path signal 100 15955 1138 13862 -955)) + (outline (path signal 100 16138 955 14045 -1138)) + (outline (path signal 100 20955 1138 18862 -955)) + (outline (path signal 100 21138 955 19045 -1138)) (outline (path signal 100 22500 5200 22500 -4600)) - (outline (path signal 100 0 1500 240.617 1480.58 475.002 1422.81 697.085 1328.18 - 901.113 1199.16 1081.8 1039.09 1234.48 852.097 1355.18 643.039 - 1440.78 417.326 1489.06 180.805 1498.78 -60.399 1469.69 -300.039 - 1402.52 -531.907 1299.04 -750 1161.91 -948.668 994.684 -1122.77 - 801.699 -1267.79 587.95 -1379.97 358.973 -1456.41 120.7 -1495.14 - -120.7 -1495.14 -358.973 -1456.41 -587.95 -1379.97 -801.699 -1267.79 - -994.684 -1122.77 -1161.91 -948.668 -1299.04 -750 -1402.52 -531.907 - -1469.69 -300.039 -1498.78 -60.399 -1489.06 180.805 -1440.78 417.326 - -1355.18 643.039 -1234.48 852.097 -1081.8 1039.09 -901.113 1199.16 - -697.085 1328.18 -475.002 1422.81 -240.617 1480.58 0 1500)) - (outline (path signal 100 5000 1500 5240.62 1480.58 5475 1422.81 5697.09 1328.18 - 5901.11 1199.16 6081.8 1039.09 6234.48 852.097 6355.18 643.039 - 6440.78 417.326 6489.06 180.805 6498.78 -60.399 6469.69 -300.039 - 6402.52 -531.907 6299.04 -750 6161.91 -948.668 5994.68 -1122.77 - 5801.7 -1267.79 5587.95 -1379.97 5358.97 -1456.41 5120.7 -1495.14 - 4879.3 -1495.14 4641.03 -1456.41 4412.05 -1379.97 4198.3 -1267.79 - 4005.32 -1122.77 3838.09 -948.668 3700.96 -750 3597.48 -531.907 - 3530.31 -300.039 3501.22 -60.399 3510.94 180.805 3559.22 417.326 - 3644.82 643.039 3765.52 852.097 3918.2 1039.09 4098.89 1199.16 - 4302.91 1328.18 4525 1422.81 4759.38 1480.58 5000 1500)) - (outline (path signal 100 10000 1500 10240.6 1480.58 10475 1422.81 10697.1 1328.18 - 10901.1 1199.16 11081.8 1039.09 11234.5 852.097 11355.2 643.039 - 11440.8 417.326 11489.1 180.805 11498.8 -60.399 11469.7 -300.039 - 11402.5 -531.907 11299 -750 11161.9 -948.668 10994.7 -1122.77 - 10801.7 -1267.79 10588 -1379.97 10359 -1456.41 10120.7 -1495.14 - 9879.3 -1495.14 9641.03 -1456.41 9412.05 -1379.97 9198.3 -1267.79 - 9005.32 -1122.77 8838.09 -948.668 8700.96 -750 8597.48 -531.907 - 8530.31 -300.039 8501.22 -60.399 8510.94 180.805 8559.22 417.326 - 8644.82 643.039 8765.52 852.097 8918.2 1039.09 9098.89 1199.16 - 9302.92 1328.18 9525 1422.81 9759.38 1480.58 10000 1500)) - (outline (path signal 100 15000 1500 15240.6 1480.58 15475 1422.81 15697.1 1328.18 - 15901.1 1199.16 16081.8 1039.09 16234.5 852.097 16355.2 643.039 - 16440.8 417.326 16489.1 180.805 16498.8 -60.399 16469.7 -300.039 - 16402.5 -531.907 16299 -750 16161.9 -948.668 15994.7 -1122.77 - 15801.7 -1267.79 15588 -1379.97 15359 -1456.41 15120.7 -1495.14 - 14879.3 -1495.14 14641 -1456.41 14412 -1379.97 14198.3 -1267.79 - 14005.3 -1122.77 13838.1 -948.668 13701 -750 13597.5 -531.907 - 13530.3 -300.039 13501.2 -60.399 13510.9 180.805 13559.2 417.326 - 13644.8 643.039 13765.5 852.097 13918.2 1039.09 14098.9 1199.16 - 14302.9 1328.18 14525 1422.81 14759.4 1480.58 15000 1500)) - (outline (path signal 100 20000 1500 20240.6 1480.58 20475 1422.81 20697.1 1328.18 - 20901.1 1199.16 21081.8 1039.09 21234.5 852.097 21355.2 643.039 - 21440.8 417.326 21489.1 180.805 21498.8 -60.399 21469.7 -300.039 - 21402.5 -531.907 21299 -750 21161.9 -948.668 20994.7 -1122.77 - 20801.7 -1267.79 20588 -1379.97 20359 -1456.41 20120.7 -1495.14 - 19879.3 -1495.14 19641 -1456.41 19412 -1379.97 19198.3 -1267.79 - 19005.3 -1122.77 18838.1 -948.668 18701 -750 18597.5 -531.907 - 18530.3 -300.039 18501.2 -60.399 18510.9 180.805 18559.2 417.326 - 18644.8 643.039 18765.5 852.097 18918.2 1039.09 19098.9 1199.16 - 19302.9 1328.18 19525 1422.81 19759.4 1480.58 20000 1500)) - (pin RoundRect[A]Pad_2600.000000x2600.000000_250.951000_um_0.000000_0 1 0 0) - (pin Round[A]Pad_2600.000000_um 2 5000 0) - (pin Round[A]Pad_2600.000000_um 3 10000 0) - (pin Round[A]Pad_2600.000000_um 4 15000 0) - (pin Round[A]Pad_2600.000000_um 5 20000 0) + (outline (path signal 100 22500 -4600 -2000 -4600)) + (outline (path signal 100 1500 0 1480.58 -240.617 1422.81 -475.002 1328.18 -697.085 + 1199.16 -901.113 1039.09 -1081.8 852.097 -1234.48 643.039 -1355.18 + 417.326 -1440.78 180.805 -1489.06 -60.399 -1498.78 -300.039 -1469.69 + -531.907 -1402.52 -750 -1299.04 -948.668 -1161.91 -1122.77 -994.684 + -1267.79 -801.699 -1379.97 -587.95 -1456.41 -358.973 -1495.14 -120.7 + -1495.14 120.7 -1456.41 358.973 -1379.97 587.95 -1267.79 801.699 + -1122.77 994.684 -948.668 1161.91 -750 1299.04 -531.907 1402.52 + -300.039 1469.69 -60.399 1498.78 180.805 1489.06 417.326 1440.78 + 643.039 1355.18 852.097 1234.48 1039.09 1081.8 1199.16 901.113 + 1328.18 697.085 1422.81 475.002 1480.58 240.617 1500 0)) + (outline (path signal 100 6500 0 6480.57 -240.617 6422.81 -475.002 6328.18 -697.085 + 6199.16 -901.113 6039.09 -1081.8 5852.1 -1234.48 5643.04 -1355.18 + 5417.33 -1440.78 5180.81 -1489.06 4939.6 -1498.78 4699.96 -1469.69 + 4468.09 -1402.52 4250 -1299.04 4051.33 -1161.91 3877.23 -994.684 + 3732.22 -801.699 3620.03 -587.95 3543.59 -358.973 3504.86 -120.7 + 3504.86 120.7 3543.59 358.973 3620.03 587.95 3732.22 801.699 + 3877.23 994.684 4051.33 1161.91 4250 1299.04 4468.09 1402.52 + 4699.96 1469.69 4939.6 1498.78 5180.81 1489.06 5417.33 1440.78 + 5643.04 1355.18 5852.1 1234.48 6039.09 1081.8 6199.16 901.113 + 6328.18 697.085 6422.81 475.002 6480.57 240.617 6500 0)) + (outline (path signal 100 11500 0 11480.6 -240.617 11422.8 -475.002 11328.2 -697.085 + 11199.2 -901.113 11039.1 -1081.8 10852.1 -1234.48 10643 -1355.18 + 10417.3 -1440.78 10180.8 -1489.06 9939.6 -1498.78 9699.96 -1469.69 + 9468.09 -1402.52 9250 -1299.04 9051.33 -1161.91 8877.23 -994.684 + 8732.22 -801.699 8620.03 -587.95 8543.59 -358.973 8504.86 -120.7 + 8504.86 120.7 8543.59 358.973 8620.03 587.95 8732.22 801.699 + 8877.23 994.684 9051.33 1161.91 9250 1299.04 9468.09 1402.52 + 9699.96 1469.69 9939.6 1498.78 10180.8 1489.06 10417.3 1440.78 + 10643 1355.18 10852.1 1234.48 11039.1 1081.8 11199.2 901.113 + 11328.2 697.085 11422.8 475.002 11480.6 240.617 11500 0)) + (outline (path signal 100 16500 0 16480.6 -240.617 16422.8 -475.002 16328.2 -697.085 + 16199.2 -901.113 16039.1 -1081.8 15852.1 -1234.48 15643 -1355.18 + 15417.3 -1440.78 15180.8 -1489.06 14939.6 -1498.78 14700 -1469.69 + 14468.1 -1402.52 14250 -1299.04 14051.3 -1161.91 13877.2 -994.684 + 13732.2 -801.699 13620 -587.95 13543.6 -358.973 13504.9 -120.7 + 13504.9 120.7 13543.6 358.973 13620 587.95 13732.2 801.699 + 13877.2 994.684 14051.3 1161.91 14250 1299.04 14468.1 1402.52 + 14700 1469.69 14939.6 1498.78 15180.8 1489.06 15417.3 1440.78 + 15643 1355.18 15852.1 1234.48 16039.1 1081.8 16199.2 901.113 + 16328.2 697.085 16422.8 475.002 16480.6 240.617 16500 0)) + (outline (path signal 100 21500 0 21480.6 -240.617 21422.8 -475.002 21328.2 -697.085 + 21199.2 -901.113 21039.1 -1081.8 20852.1 -1234.48 20643 -1355.18 + 20417.3 -1440.78 20180.8 -1489.06 19939.6 -1498.78 19700 -1469.69 + 19468.1 -1402.52 19250 -1299.04 19051.3 -1161.91 18877.2 -994.684 + 18732.2 -801.699 18620 -587.95 18543.6 -358.973 18504.9 -120.7 + 18504.9 120.7 18543.6 358.973 18620 587.95 18732.2 801.699 + 18877.2 994.684 19051.3 1161.91 19250 1299.04 19468.1 1402.52 + 19700 1469.69 19939.6 1498.78 20180.8 1489.06 20417.3 1440.78 + 20643 1355.18 20852.1 1234.48 21039.1 1081.8 21199.2 901.113 + 21328.2 697.085 21422.8 475.002 21480.6 240.617 21500 0)) + (pin RoundRect[A]Pad_2600.000000x2600.000000_250.951000_um_0.000000_0 (rotate 270) 1 0 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 2 5000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 3 10000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 4 15000 0) + (pin Round[A]Pad_2600.000000_um (rotate 270) 5 20000 0) ) (image Fuse:Fuse_1812_4532Metric (outline (polygon signal 0 2945 -1945 -2945 -1945 -2945 1945 2945 1945)) @@ -999,78 +1090,6 @@ (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 1 -2700 0) (pin RoundRect[T]Pad_3500.000000x1600.000000_250.951000_um_0.000000_0 2 2700 0) ) - (image Module:Arduino_UNO_R3 - (outline (polygon signal 0 38345 -2.071 40885 -2542.07 40885 -35307.9 38345 -37847.9 - 38345 -49277.9 36577.9 -51045 -28185 -51045 -28185 -41525 - -34535 -41525 -34535 -29595 -28185 -29595 -28185 -9775 -30095 -9775 - -30095 -385 -28185 -385 -28185 2785 38345 2785)) - (outline (path signal 120 -34420 -29720 -34420 -41400)) - (outline (path signal 120 -34420 -41400 -28070 -41400)) - (outline (path signal 120 -29970 -510 -29970 -9650)) - (outline (path signal 120 -29970 -9650 -28070 -9650)) - (outline (path signal 120 -28070 2670 -28070 -510)) - (outline (path signal 120 -28070 -510 -29970 -510)) - (outline (path signal 120 -28070 -9650 -28070 -29720)) - (outline (path signal 120 -28070 -29720 -34420 -29720)) - (outline (path signal 120 -28070 -41400 -28070 -50930)) - (outline (path signal 120 -28070 -50930 36580 -50930)) - (outline (path signal 120 36580 -50930 38230 -49280)) - (outline (path signal 120 38230 2670 -28070 2670)) - (outline (path signal 120 38230 0 38230 2670)) - (outline (path signal 120 38230 -37850 40770 -35310)) - (outline (path signal 120 38230 -49280 38230 -37850)) - (outline (path signal 120 40770 -2540 38230 0)) - (outline (path signal 120 40770 -35310 40770 -2540)) - (outline (path signal 100 -34290 -29840 -18410 -29840)) - (outline (path signal 100 -34290 -41270 -34290 -29840)) - (outline (path signal 100 -29840 -640 -16510 -640)) - (outline (path signal 100 -29840 -9530 -29840 -640)) - (outline (path signal 100 -27940 2540 38100 2540)) - (outline (path signal 100 -27940 -50800 -27940 2540)) - (outline (path signal 100 -18410 -29840 -18410 -41270)) - (outline (path signal 100 -18410 -41270 -34290 -41270)) - (outline (path signal 100 -16510 -640 -16510 -9530)) - (outline (path signal 100 -16510 -9530 -29840 -9530)) - (outline (path signal 100 36580 -50800 -27940 -50800)) - (outline (path signal 100 38100 2540 38100 0)) - (outline (path signal 100 38100 0 40640 -2540)) - (outline (path signal 100 38100 -37850 38100 -49280)) - (outline (path signal 100 38100 -49280 36580 -50800)) - (outline (path signal 100 40640 -2540 40640 -35310)) - (outline (path signal 100 40640 -35310 38100 -37850)) - (pin Rect[A]Pad_1600.000000x1600.000000_um (rotate 90) 1 0 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 2 2540 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 3 5080 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 4 7620 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 5 10160 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 6 12700 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 7 15240 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 8 17780 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 9 22860 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 10 25400 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 11 27940 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 12 30480 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 13 33020 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 14 35560 0) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 15 35560 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 16 33020 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 17 30480 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 18 27940 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 19 25400 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 20 22860 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 21 20320 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 22 17780 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 23 13720 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 24 11180 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 25 8640 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 26 6100 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 27 3560 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 28 1020 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 29 -1520 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 30 -4060 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 31 -6600 -48260) - (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 32 -9140 -48260) - ) (image "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" (outline (polygon signal 0 1375 2745 2245 2745 2245 1875 2625 1875 2625 -1875 2245 -1875 2245 -2745 1375 -2745 1375 -3125 -1375 -3125 @@ -1216,6 +1235,28 @@ (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 1 -1650 0) (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 2 1650 0) ) + (image "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical::2" + (outline (polygon signal 0 -2945 -3895 -2945 2845 10445 2845 10445 -3895)) + (outline (path signal 120 -1600 2750 -2850 2750)) + (outline (path signal 120 -2850 2750 -2850 1500)) + (outline (path signal 120 10050 200 9300 200)) + (outline (path signal 120 9300 200 9300 -2750)) + (outline (path signal 120 -1800 200 -1800 -2750)) + (outline (path signal 120 -2550 200 -1800 200)) + (outline (path signal 120 9300 -2750 3750 -2750)) + (outline (path signal 120 -1800 -2750 3750 -2750)) + (outline (path signal 120 -2560 2460 -2560 -3510 10060 -3510 10060 2460 -2560 2460)) + (outline (path signal 120 8250 2450 8250 1700 10050 1700 10050 2450 8250 2450)) + (outline (path signal 120 750 2450 750 1700 6750 1700 6750 2450 750 2450)) + (outline (path signal 120 -2550 2450 -2550 1700 -750 1700 -750 2450 -2550 2450)) + (outline (path signal 100 -625 2350 0 1350)) + (outline (path signal 100 0 1350 625 2350)) + (outline (path signal 100 -2450 2350 -2450 -3400 9950 -3400 9950 2350 -2450 2350)) + (pin RoundRect[A]Pad_1700.000000x1950.000000_250.951000_um_0.000000_0 1 0 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 2 2500 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 3 5000 0) + (pin Oval[A]Pad_1700.000000x1950.000000_um 4 7500 0) + ) (image "Diode_SMD:D_SOD-123::1" (outline (polygon signal 0 -2345 1145 2345 1145 2345 -1145 -2345 -1145)) (outline (path signal 120 -2360 -1000 1650 -1000)) @@ -1235,8 +1276,82 @@ (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 1 -1650 0) (pin RoundRect[T]Pad_900.000000x1200.000000_225.856000_um_0.000000_0 2 1650 0) ) + (image Module:Arduino_UNO_R3 + (outline (polygon signal 0 38345 -2.071 40885 -2542.07 40885 -35307.9 38345 -37847.9 + 38345 -49277.9 36577.9 -51045 -28185 -51045 -28185 -41525 + -34535 -41525 -34535 -29595 -28185 -29595 -28185 -9775 -30095 -9775 + -30095 -385 -28185 -385 -28185 2785 38345 2785)) + (outline (path signal 120 -34420 -41400 -28070 -41400)) + (outline (path signal 120 -34420 -29720 -34420 -41400)) + (outline (path signal 120 -29970 -9650 -28070 -9650)) + (outline (path signal 120 -29970 -510 -29970 -9650)) + (outline (path signal 120 -28070 -50930 36580 -50930)) + (outline (path signal 120 -28070 -41400 -28070 -50930)) + (outline (path signal 120 -28070 -29720 -34420 -29720)) + (outline (path signal 120 -28070 -9650 -28070 -29720)) + (outline (path signal 120 -28070 -510 -29970 -510)) + (outline (path signal 120 -28070 2670 -28070 -510)) + (outline (path signal 120 36580 -50930 38230 -49280)) + (outline (path signal 120 38230 -49280 38230 -37850)) + (outline (path signal 120 38230 -37850 40770 -35310)) + (outline (path signal 120 38230 0 38230 2670)) + (outline (path signal 120 38230 2670 -28070 2670)) + (outline (path signal 120 40770 -35310 40770 -2540)) + (outline (path signal 120 40770 -2540 38230 0)) + (outline (path signal 100 -34290 -41270 -34290 -29840)) + (outline (path signal 100 -34290 -29840 -18410 -29840)) + (outline (path signal 100 -29840 -9530 -29840 -640)) + (outline (path signal 100 -29840 -640 -16510 -640)) + (outline (path signal 100 -27940 -50800 -27940 2540)) + (outline (path signal 100 -27940 2540 38100 2540)) + (outline (path signal 100 -18410 -41270 -34290 -41270)) + (outline (path signal 100 -18410 -29840 -18410 -41270)) + (outline (path signal 100 -16510 -9530 -29840 -9530)) + (outline (path signal 100 -16510 -640 -16510 -9530)) + (outline (path signal 100 36580 -50800 -27940 -50800)) + (outline (path signal 100 38100 -49280 36580 -50800)) + (outline (path signal 100 38100 -37850 38100 -49280)) + (outline (path signal 100 38100 0 40640 -2540)) + (outline (path signal 100 38100 2540 38100 0)) + (outline (path signal 100 40640 -35310 38100 -37850)) + (outline (path signal 100 40640 -2540 40640 -35310)) + (pin Rect[A]Pad_1600.000000x1600.000000_um (rotate 90) 1 0 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 2 2540 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 3 5080 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 4 7620 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 5 10160 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 6 12700 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 7 15240 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 8 17780 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 9 22860 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 10 25400 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 11 27940 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 12 30480 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 13 33020 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 14 35560 0) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 15 35560 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 16 33020 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 17 30480 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 18 27940 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 19 25400 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 20 22860 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 21 20320 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 22 17780 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 23 13720 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 24 11180 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 25 8640 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 26 6100 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 27 3560 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 28 1020 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 29 -1520 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 30 -4060 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 31 -6600 -48260) + (pin Oval[A]Pad_1600.000000x1600.000000_um (rotate 90) 32 -9140 -48260) + ) (padstack Round[A]Pad_1350.000000_um (shape (circle F.Cu 1350)) + (shape (circle In1.Cu 1350)) + (shape (circle In2.Cu 1350)) (shape (circle B.Cu 1350)) (attach off) ) @@ -1246,34 +1361,67 @@ ) (padstack Round[A]Pad_1700.000000_um (shape (circle F.Cu 1700)) + (shape (circle In1.Cu 1700)) + (shape (circle In2.Cu 1700)) (shape (circle B.Cu 1700)) (attach off) ) (padstack Round[A]Pad_2000.000000_um (shape (circle F.Cu 2000)) + (shape (circle In1.Cu 2000)) + (shape (circle In2.Cu 2000)) (shape (circle B.Cu 2000)) (attach off) ) (padstack Round[A]Pad_2600.000000_um (shape (circle F.Cu 2600)) + (shape (circle In1.Cu 2600)) + (shape (circle In2.Cu 2600)) (shape (circle B.Cu 2600)) (attach off) ) + (padstack Round[A]Pad_700.000000_um + (shape (circle F.Cu 700)) + (shape (circle In1.Cu 700)) + (shape (circle In2.Cu 700)) + (shape (circle B.Cu 700)) + (attach off) + ) (padstack Oval[A]Pad_1600.000000x1600.000000_um (shape (path F.Cu 1600 0 0 0 0)) + (shape (path In1.Cu 1600 0 0 0 0)) + (shape (path In2.Cu 1600 0 0 0 0)) (shape (path B.Cu 1600 0 0 0 0)) (attach off) ) (padstack Oval[A]Pad_1700.000000x1950.000000_um (shape (path F.Cu 1700 0 -125 0 125)) + (shape (path In1.Cu 1700 0 -125 0 125)) + (shape (path In2.Cu 1700 0 -125 0 125)) (shape (path B.Cu 1700 0 -125 0 125)) (attach off) ) (padstack Oval[A]Pad_1700.000000x2000.000000_um (shape (path F.Cu 1700 0 -150 0 150)) + (shape (path In1.Cu 1700 0 -150 0 150)) + (shape (path In2.Cu 1700 0 -150 0 150)) (shape (path B.Cu 1700 0 -150 0 150)) (attach off) ) + (padstack Oval[A]Pad_900.000000x1700.000000_um + (shape (path F.Cu 900 0 -400 0 400)) + (shape (path In1.Cu 900 0 -400 0 400)) + (shape (path In2.Cu 900 0 -400 0 400)) + (shape (path B.Cu 900 0 -400 0 400)) + (attach off) + ) + (padstack Oval[A]Pad_900.000000x2400.000000_um + (shape (path F.Cu 900 0 -750 0 750)) + (shape (path In1.Cu 900 0 -750 0 750)) + (shape (path In2.Cu 900 0 -750 0 750)) + (shape (path B.Cu 900 0 -750 0 750)) + (attach off) + ) (padstack RoundRect[T]Pad_2200.000000x1200.000000_250.951000_um_0.000000_0 (shape (polygon F.Cu 0 -1100.95 350 -1081.85 446.035 -1027.45 527.449 -946.035 581.848 -849.999 600.95 850 600.951 946.035 581.848 1027.45 527.449 @@ -1317,6 +1465,18 @@ 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 -1300.95 1050)) + (shape (polygon In1.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) + (shape (polygon In2.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 + -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 + 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 + 1227.45 -1227.45 1146.04 -1281.85 1050 -1300.95 -1050 -1300.95 + -1146.04 -1281.85 -1227.45 -1227.45 -1281.85 -1146.04 -1300.95 -1050 + -1300.95 1050)) (shape (polygon B.Cu 0 -1300.95 1050 -1281.85 1146.04 -1227.45 1227.45 -1146.04 1281.85 -1050 1300.95 1050 1300.95 1146.04 1281.85 1227.45 1227.45 1281.85 1146.04 1300.95 1050 1300.95 -1050 1281.85 -1146.04 @@ -1479,6 +1639,18 @@ 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 -850.951 725)) + (shape (polygon In1.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) + (shape (polygon In2.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 + -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 + 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 + 777.449 -902.449 696.035 -956.848 599.999 -975.95 -600 -975.951 + -696.035 -956.848 -777.449 -902.449 -831.848 -821.035 -850.95 -724.999 + -850.951 725)) (shape (polygon B.Cu 0 -850.951 725 -831.848 821.035 -777.449 902.449 -696.035 956.848 -599.999 975.95 600 975.951 696.035 956.848 777.449 902.449 831.848 821.035 850.95 724.999 850.951 -725 831.848 -821.035 @@ -1494,6 +1666,18 @@ 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 -850.951 750)) + (shape (polygon In1.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) + (shape (polygon In2.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 + -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 + 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 + 777.449 -927.449 696.035 -981.848 599.999 -1000.95 -600 -1000.95 + -696.035 -981.848 -777.449 -927.449 -831.848 -846.035 -850.95 -749.999 + -850.951 750)) (shape (polygon B.Cu 0 -850.951 750 -831.848 846.035 -777.449 927.449 -696.035 981.848 -599.999 1000.95 600 1000.95 696.035 981.848 777.449 927.449 831.848 846.035 850.95 749.999 850.951 -750 831.848 -846.035 @@ -1513,6 +1697,8 @@ ) (padstack Rect[A]Pad_2000.000000x2000.000000_um (shape (rect F.Cu -1000 -1000 1000 1000)) + (shape (rect In1.Cu -1000 -1000 1000 1000)) + (shape (rect In2.Cu -1000 -1000 1000 1000)) (shape (rect B.Cu -1000 -1000 1000 1000)) (attach off) ) @@ -1536,48 +1722,68 @@ (shape (rect F.Cu -500 -750 500 750)) (attach off) ) + (padstack Rect[T]Pad_1250.000000x1000.000000_um + (shape (rect F.Cu -625 -500 625 500)) + (attach off) + ) (padstack Rect[A]Pad_1350.000000x1350.000000_um (shape (rect F.Cu -675 -675 675 675)) + (shape (rect In1.Cu -675 -675 675 675)) + (shape (rect In2.Cu -675 -675 675 675)) (shape (rect B.Cu -675 -675 675 675)) (attach off) ) (padstack Rect[A]Pad_1600.000000x1600.000000_um (shape (rect F.Cu -800 -800 800 800)) + (shape (rect In1.Cu -800 -800 800 800)) + (shape (rect In2.Cu -800 -800 800 800)) (shape (rect B.Cu -800 -800 800 800)) (attach off) ) (padstack Rect[A]Pad_1700.000000x1700.000000_um (shape (rect F.Cu -850 -850 850 850)) + (shape (rect In1.Cu -850 -850 850 850)) + (shape (rect In2.Cu -850 -850 850 850)) (shape (rect B.Cu -850 -850 850 850)) (attach off) ) - (padstack "Via[0-1]_600:300_um" + (padstack "Via[0-3]_600:300_um" (shape (circle F.Cu 600)) + (shape (circle In1.Cu 600)) + (shape (circle In2.Cu 600)) (shape (circle B.Cu 600)) (attach off) ) + (padstack "Via[0-3]_800:400_um" + (shape (circle F.Cu 800)) + (shape (circle In1.Cu 800)) + (shape (circle In2.Cu 800)) + (shape (circle B.Cu 800)) + (attach off) + ) ) (network - (net GATE_LS - (pins R2-1 Q1-1 Q5-3) + (net /GATE_LS + (pins R2-1 Q5-2) ) - (net SYS5V + (net /SYS5V (pins R2-2 J1-20 P11-2 F1-1 K1-2 J2-18 D6-1) ) (net USART1_RX (pins P13-1 Rdfu-1 H3-2 K1-1 J2-7 MOD1-23) ) - (net DIN_4G + (net /DIN_4G (pins P13-2 J7-3 K1-5 K1-6) ) (net GND - (pins P13-3 Rigb-2 Dbk-2 P6-3 Ren2-2 DB2-1 P4-2 P10-2 Ccomp-2 U7-5 U7-9 DB1-1 - J1-19 Ccomp2-2 C34-2 Rfreq2-2 U3-4 C40-2 J7-10 Cu3-2 D10-2 Q5-2 C7-2 P2-2 - Q2-2 H3-3 C35-2 U4-2 U4-4 C9-2 U2-5 U2-9 C22-2 R61-2 P5-2 DB3-1 C41-2 Rled-2 - JP4-3 Rgs-2 R41-2 DB4-1 R6-2 P12-2 C32-2 Q4-2 P1-2 R52-2 J2-19 R56-2 C11-2 - C43-2 MOD1-6 MOD1-7 MOD1-29 U6-5 U6-25 JP3-1 C10-2 SW1-2 SW1-2@1 Rrp-2 Q6-2 - C31-2 R21-2 C30-2 C3-2 C33-2 Rfreq-2 P3-2 C5-2 R8-2 C24-2 R54-2 R50-2 Dbk2-2 - Cu4-2 C23-2 JP2-3) + (pins P13-3 Rigb-2 Dbk-2 P6-3 Ren2-2 DB2-1 P4-2 P10-2 Ccomp-2 U7-5 DB1-1 J1-19 + Ccomp2-2 C34-2 Rfreq2-2 U3-4 C40-2 J7-4 J7-10 Cu3-2 D10-2 Q5-3 C7-2 P2-2 H3-3 + C35-2 U4-2 U4-4 C9-2 SW4G-2 J8-1 J8-6 J8-10 U2-5 C22-2 R61-2 Rcc1-2 P5-2 DB3-1 + C41-2 Rled-2 JP4-3 Rgs-2 R41-2 DB4-1 Rcc2-2 R6-2 P12-2 C32-2 J9-A1 J9-A12 + J9-B1 J9-B12 J9-SH J9-SH@1 J9-SH@2 J9-SH@3 P1-2 R52-2 J2-19 R56-2 C11-2 C43-2 + U6-5 U6-25 JP3-1 C10-2 SW1-2 SW1-2@1 Rrp-2 Q6-3 C31-2 R21-2 C30-2 C3-2 C33-2 + Rfreq-2 P3-2 C5-2 R8-2 C24-2 R54-2 R50-2 Dbk2-2 Cu4-2 C23-2 JP2-3 D4G-1 MOD1-6 + MOD1-7 MOD1-29) ) (net IGN_SENSE (pins Rigb-1 J1-11 C9-1 D5-2 Rig-2) @@ -1585,52 +1791,52 @@ (net SW_FAN (pins Dbk-1 Cbst-2 L2-1 U2-1) ) - (net 5V_FAN + (net /5V_FAN (pins P6-1 D2-1 R20-1 L2-2 JP1-1 C23-1) ) - (net FAN_RET - (pins P6-2 D2-2 Q2-3) + (net /FAN_RET + (pins P6-2 D2-2) ) (net FAN_TACH_RAW (pins P6-4 Rts-1) ) - (net EN_FAN + (net /EN_FAN (pins Ren2-1 U2-2 Ren1-2) ) - (net BLED2 + (net /BLED2 (pins DB2-2 RB2-2) ) - (net BAT_PLUS + (net /BAT_PLUS (pins P4-1 R5-1 L6-2 C35-1 U6-23) ) - (net NTC + (net /NTC (pins P4-3 R55-2 U6-17) ) - (net NRST + (net /NRST (pins P10-1 J1-5 SW1-1 SW1-1@1) ) (net CC_FAN (pins Ccomp-1 Rcomp-2) ) - (net SW3_NODE + (net /SW3_NODE (pins U7-1 Cbst2-2 Dbk2-1 L7-1) ) - (net SW_5V - (pins U7-2 U7-7 Q1-3 C40-1 MOD1-5 C3-1 P3-1) + (net /SW_5V + (pins U7-2 U7-7 C40-1 C3-1 P3-1 MOD1-5) ) - (net COMP3 + (net /COMP3 (pins U7-3 Rcomp2-1) ) - (net FB3 + (net /FB3 (pins U7-4 R60-2 R61-1) ) - (net FREQ3 + (net /FREQ3 (pins U7-6 Rfreq2-1) ) - (net BST3 + (net /BST3 (pins U7-8 Cbst2-1) ) - (net BLED1 + (net /BLED1 (pins DB1-2 RB1-2) ) (net "unconnected-(J1-Pin_1-Pad1)" @@ -1645,19 +1851,19 @@ (net "unconnected-(J1-Pin_4-Pad4)" (pins J1-4) ) - (net BAT_SENSE + (net /BAT_SENSE (pins J1-6 R5-2 R6-1 C5-1) ) - (net PWR_CTRL + (net /PWR_CTRL (pins J1-7 R1-1) ) - (net GNSS_TX - (pins J1-8 MOD1-16 P3-3) + (net /GNSS_TX + (pins J1-8 P3-3 MOD1-16) ) - (net GNSS_RX - (pins J1-9 MOD1-15 P3-4) + (net /GNSS_RX + (pins J1-9 P3-4 MOD1-15) ) - (net 5V_SENSE + (net /5V_SENSE (pins J1-10 C7-1 R7-2 R8-1) ) (net FAN_PWM @@ -1667,9 +1873,9 @@ (pins J1-13) ) (net EXT_LED - (pins J1-14 Rled-1 Q4-1) + (pins J1-14 Rled-1) ) - (net NTC_TEMP + (net /NTC_TEMP (pins J1-15 P12-1 R42-2 C24-1) ) (net "unconnected-(J1-Pin_16-Pad16)" @@ -1679,99 +1885,96 @@ (pins J1-17 Rts-2 Rtp-2) ) (net 3V3 - (pins J1-18 R31-1 U3-3 Cu3-1 R3-1 Rdfu-2 U4-5 P5-1 Rtp-1 R30-1 J2-20 R42-1 MOD1-2 - R58-1 D5-1 R57-1 Cu4-1) + (pins J1-18 R31-1 U3-3 Cu3-1 R3-1 Rdfu-2 U4-5 P5-1 Rtp-1 R30-1 J2-20 R42-1 R58-1 + D5-1 R57-1 Cu4-1 MOD1-2) ) - (net COMP3_C + (net /COMP3_C (pins Ccomp2-1 Rcomp2-2) ) - (net MAIN5V + (net /MAIN5V (pins P11-1 Q7-1 Q7-2 Q7-3 C34-1 JP4-1 C32-1 U6-1 U6-24 JP3-3 R53-1 C33-1 JP2-1) ) - (net SW_IN - (pins Q1-2 F1-2) - ) (net FAN_GATE - (pins Rg-2 Q2-1 Rgs-1) + (pins Rg-2 Rgs-1) ) - (net IGATE + (net /IGATE (pins Q7-4 U6-15) ) - (net VIN_SW + (net /VIN_SW (pins Q7-5 Q7-6 Q7-7 Q7-8 RS1-2 U6-7) ) - (net I2C_SDA + (net /I2C_SDA (pins R31-2 U3-1 U4-6 P5-3 J2-15) ) - (net I2C_SCL + (net /MODEM_LED + (pins Rmled-1 J8-8) + ) + (net /MODEM_LED_A + (pins Rmled-2 D4G-2) + ) + (net /I2C_SCL (pins U3-2 U4-1 P5-4 R30-2 J2-14) ) - (net 3V3_MODEM - (pins J7-1 R60-1 C41-1 C43-1 L7-2) + (net /3V3_MODEM + (pins J7-1 R60-1 J8-7 C41-1 C43-1 L7-2) ) - (net DOUT_4G + (net /DOUT_4G (pins J7-2 MOD1-17) ) - (net "unconnected-(J7-Pin_4-Pad4)" - (pins J7-4) + (net /MODEM_RST + (pins J7-5 SW4G-1) ) - (net "unconnected-(J7-Pin_5-Pad5)" - (pins J7-5) + (net /USB_VBUS + (pins J7-6 J9-A4 J9-A9 J9-B4 J9-B9) ) - (net "unconnected-(J7-Pin_6-Pad6)" - (pins J7-6) + (net /USB_DP + (pins J7-7 J9-A6 J9-B6) ) - (net "unconnected-(J7-Pin_7-Pad7)" - (pins J7-7) - ) - (net "unconnected-(J7-Pin_8-Pad8)" - (pins J7-8) + (net /USB_DM + (pins J7-8 J9-A7 J9-B7) ) (net "unconnected-(J7-Pin_9-Pad9)" (pins J7-9) ) - (net VEH5V + (net /VEH5V (pins RS1-1 P2-1 R55-1 JP1-2 U6-6 U6-16 R51-1 C31-1 C30-1 R7-1) ) - (net LED_A + (net /LED_A (pins R3-2 P8-1 D1-2) ) - (net 24V_IN - (pins D10-1 P1-1 Q10-2) + (net /24V_IN + (pins D10-1 P1-1) ) (net COMP_FAN (pins Rcomp-1 U2-3) ) - (net BASE_LS + (net /BASE_LS (pins Q5-1 R1-2) ) - (net FB_FAN + (net /FB_FAN (pins R20-2 U2-4 R21-1) ) (net BST_FAN (pins Cbst-1 U2-8) ) - (net USART1_TX + (net /USART1_TX (pins H3-1 K1-10 J2-6) ) - (net SW_BAT + (net /SW_BAT (pins L6-1 U6-21 U6-22) ) (net "unconnected-(U4-ALERT-Pad3)" (pins U4-3) ) - (net BATLED3 + (net /BATLED3 (pins RB3-1 J2-3) ) - (net BLED3 + (net /BLED3 (pins RB3-2 DB3-2) ) - (net CLPROG_TP + (net /CLPROG_TP (pins TP1-1 U6-3) ) - (net "unconnected-(J8-Pin_1-Pad1)" - (pins J8-1) - ) (net "unconnected-(J8-Pin_2-Pad2)" (pins J8-2) ) @@ -1784,45 +1987,39 @@ (net "unconnected-(J8-Pin_5-Pad5)" (pins J8-5) ) - (net "unconnected-(J8-Pin_6-Pad6)" - (pins J8-6) - ) - (net "unconnected-(J8-Pin_7-Pad7)" - (pins J8-7) - ) - (net "unconnected-(J8-Pin_8-Pad8)" - (pins J8-8) - ) (net "unconnected-(J8-Pin_9-Pad9)" (pins J8-9) ) - (net "unconnected-(J8-Pin_10-Pad10)" - (pins J8-10) - ) (net FREQ_FAN (pins U2-6 Rfreq-1) ) (net 24V - (pins U2-7 C22-1 C11-1 DzG-3 Q10-3 C10-1 Ren1-1) + (pins U2-7 C22-1 C11-1 DzG-3 C10-1 Ren1-1) ) - (net BATLED4 + (net /BATLED4 (pins RB4-1 J2-4) ) - (net BLED4 + (net /BLED4 (pins RB4-2 DB4-2) ) - (net F0_SEL + (net /USB_CC1 + (pins Rcc1-1 J9-A5) + ) + (net /F0_SEL (pins JP4-2 U6-14) ) - (net LED_K - (pins P8-2 D1-1 Q4-3) + (net /LED_K + (pins P8-2 D1-1) ) - (net Q6_BASE + (net /Q6_BASE (pins R41-1 R40-2 Q6-1) ) - (net BATLED2 + (net /BATLED2 (pins RB2-1 J2-2) ) + (net /USB_CC2 + (pins Rcc2-1 J9-B5) + ) (net IGN_IN (pins P1-3 Rig-1) ) @@ -1832,16 +2029,19 @@ (net "unconnected-(P1-Pin_5-Pad5)" (pins P1-5) ) - (net PFI + (net /SW_IN + (pins F1-2) + ) + (net /PFI (pins R52-1 U6-19 R51-2) ) - (net KCOIL - (pins K1-9 Q6-3 D6-2) + (net /KCOIL + (pins K1-9 Q6-2 D6-2) ) - (net BATLED1 + (net /BATLED1 (pins J2-1 RB1-1) ) - (net CHRG_EN + (net /CHRG_EN (pins J2-5 R56-1 U6-4) ) (net "unconnected-(J2-Pin_8-Pad8)" @@ -1853,13 +2053,13 @@ (net "unconnected-(J2-Pin_10-Pad10)" (pins J2-10) ) - (net CHRG_STAT + (net /CHRG_STAT (pins J2-11 U6-8 R57-2) ) - (net CHRG_FAULT + (net /CHRG_FAULT (pins J2-12 U6-9 R58-2) ) - (net BYP_CTRL + (net /BYP_CTRL (pins J2-13 R40-1) ) (net "unconnected-(J2-Pin_16-Pad16)" @@ -1869,7 +2069,25 @@ (pins J2-17) ) (net Q10_GATE - (pins DzG-1 Q10-1 Rrp-1) + (pins DzG-1 Rrp-1) + ) + (net /PROG + (pins U6-2 R50-1) + ) + (net /VFB_BST + (pins U6-10 U6-18 R53-2 R54-1) + ) + (net "unconnected-(U6-RST-Pad11)" + (pins U6-11) + ) + (net /F2_SEL + (pins U6-12 JP2-2) + ) + (net /F1_SEL + (pins U6-13 JP3-2) + ) + (net /PFO_TP + (pins U6-20 TP2-1) ) (net "unconnected-(MOD1-NC-Pad1)" (pins MOD1-1) @@ -1940,60 +2158,1344 @@ (net "unconnected-(MOD1-SCL-Pad32)" (pins MOD1-32) ) - (net PROG - (pins U6-2 R50-1) - ) - (net VFB_BST - (pins U6-10 U6-18 R53-2 R54-1) - ) - (net "unconnected-(U6-RST-Pad11)" - (pins U6-11) - ) - (net F2_SEL - (pins U6-12 JP2-2) - ) - (net F1_SEL - (pins U6-13 JP3-2) - ) - (net PFO_TP - (pins U6-20 TP2-1) - ) - (class kicad_default 24V 24V_IN 3V3 3V3_MODEM 5V_FAN 5V_SENSE BASE_LS - BATLED1 BATLED2 BATLED3 BATLED4 BAT_PLUS BAT_SENSE BLED1 BLED2 BLED3 - BLED4 BST3 BST_FAN BYP_CTRL CC_FAN CHRG_EN CHRG_FAULT CHRG_STAT CLPROG_TP - COMP3 COMP3_C COMP_FAN DIN_4G DOUT_4G EN_FAN EXT_LED F0_SEL F1_SEL F2_SEL - FAN_GATE FAN_PWM FAN_RET FAN_TACH FAN_TACH_RAW FB3 FB_FAN FREQ3 FREQ_FAN - GATE_LS GND GNSS_RX GNSS_TX I2C_SCL I2C_SDA IGATE IGN_IN IGN_SENSE KCOIL - LED_A LED_K MAIN5V NRST NTC NTC_TEMP PFI PFO_TP PROG PWR_CTRL Q10_GATE - Q6_BASE SW3_NODE SW_5V SW_BAT SW_FAN SW_IN SYS5V USART1_RX USART1_TX - VEH5V VFB_BST VIN_SW "unconnected-(J1-Pin_1-Pad1)" "unconnected-(J1-Pin_13-Pad13)" - "unconnected-(J1-Pin_16-Pad16)" "unconnected-(J1-Pin_2-Pad2)" "unconnected-(J1-Pin_3-Pad3)" - "unconnected-(J1-Pin_4-Pad4)" "unconnected-(J2-Pin_10-Pad10)" "unconnected-(J2-Pin_16-Pad16)" - "unconnected-(J2-Pin_17-Pad17)" "unconnected-(J2-Pin_8-Pad8)" "unconnected-(J2-Pin_9-Pad9)" - "unconnected-(J7-Pin_4-Pad4)" "unconnected-(J7-Pin_5-Pad5)" "unconnected-(J7-Pin_6-Pad6)" - "unconnected-(J7-Pin_7-Pad7)" "unconnected-(J7-Pin_8-Pad8)" "unconnected-(J7-Pin_9-Pad9)" - "unconnected-(J8-Pin_1-Pad1)" "unconnected-(J8-Pin_10-Pad10)" "unconnected-(J8-Pin_2-Pad2)" - "unconnected-(J8-Pin_3-Pad3)" "unconnected-(J8-Pin_4-Pad4)" "unconnected-(J8-Pin_5-Pad5)" - "unconnected-(J8-Pin_6-Pad6)" "unconnected-(J8-Pin_7-Pad7)" "unconnected-(J8-Pin_8-Pad8)" - "unconnected-(J8-Pin_9-Pad9)" "unconnected-(MOD1-3V3_OUT-Pad4)" "unconnected-(MOD1-A0-Pad9)" - "unconnected-(MOD1-A1-Pad10)" "unconnected-(MOD1-A2-Pad11)" "unconnected-(MOD1-A3-Pad12)" - "unconnected-(MOD1-A4-Pad13)" "unconnected-(MOD1-A5-Pad14)" "unconnected-(MOD1-AREF-Pad30)" - "unconnected-(MOD1-D10-Pad25)" "unconnected-(MOD1-D3-Pad18)" "unconnected-(MOD1-D4-Pad19)" - "unconnected-(MOD1-D5-Pad20)" "unconnected-(MOD1-D6-Pad21)" "unconnected-(MOD1-D7-Pad22)" - "unconnected-(MOD1-D9-Pad24)" "unconnected-(MOD1-EXTINT_D12-Pad27)" + (class kicad_default /24V_IN /3V3_MODEM /5V_FAN /5V_SENSE /BASE_LS /BATLED1 + /BATLED2 /BATLED3 /BATLED4 /BAT_PLUS /BAT_SENSE /BLED1 /BLED2 /BLED3 + /BLED4 /BST3 /BYP_CTRL /CHRG_EN /CHRG_FAULT /CHRG_STAT /CLPROG_TP /COMP3 + /COMP3_C /DIN_4G /DOUT_4G /EN_FAN /F0_SEL /F1_SEL /F2_SEL /FAN_RET /FB3 + /FB_FAN /FREQ3 /GATE_LS /GNSS_RX /GNSS_TX /I2C_SCL /I2C_SDA /IGATE /KCOIL + /LED_A /LED_K /MAIN5V /MODEM_LED /MODEM_LED_A /MODEM_RST /NRST /NTC + /NTC_TEMP /PFI /PFO_TP /PROG /PWR_CTRL /Q6_BASE /SW3_NODE /SW_5V /SW_BAT + /SW_IN /SYS5V /USART1_TX /USB_CC1 /USB_CC2 /USB_DM /USB_DP /USB_VBUS + /VEH5V /VFB_BST /VIN_SW 3V3 BST_FAN CC_FAN COMP_FAN EXT_LED FAN_GATE + FAN_PWM FAN_TACH FAN_TACH_RAW FREQ_FAN GND IGN_SENSE Q10_GATE USART1_RX + "unconnected-(J1-Pin_1-Pad1)" "unconnected-(J1-Pin_13-Pad13)" "unconnected-(J1-Pin_16-Pad16)" + "unconnected-(J1-Pin_2-Pad2)" "unconnected-(J1-Pin_3-Pad3)" "unconnected-(J1-Pin_4-Pad4)" + "unconnected-(J2-Pin_10-Pad10)" "unconnected-(J2-Pin_16-Pad16)" "unconnected-(J2-Pin_17-Pad17)" + "unconnected-(J2-Pin_8-Pad8)" "unconnected-(J2-Pin_9-Pad9)" "unconnected-(J7-Pin_9-Pad9)" + "unconnected-(J8-Pin_2-Pad2)" "unconnected-(J8-Pin_3-Pad3)" "unconnected-(J8-Pin_4-Pad4)" + "unconnected-(J8-Pin_5-Pad5)" "unconnected-(J8-Pin_9-Pad9)" "unconnected-(MOD1-3V3_OUT-Pad4)" + "unconnected-(MOD1-A0-Pad9)" "unconnected-(MOD1-A1-Pad10)" "unconnected-(MOD1-A2-Pad11)" + "unconnected-(MOD1-A3-Pad12)" "unconnected-(MOD1-A4-Pad13)" "unconnected-(MOD1-A5-Pad14)" + "unconnected-(MOD1-AREF-Pad30)" "unconnected-(MOD1-D10-Pad25)" "unconnected-(MOD1-D3-Pad18)" + "unconnected-(MOD1-D4-Pad19)" "unconnected-(MOD1-D5-Pad20)" "unconnected-(MOD1-D6-Pad21)" + "unconnected-(MOD1-D7-Pad22)" "unconnected-(MOD1-D9-Pad24)" "unconnected-(MOD1-EXTINT_D12-Pad27)" "unconnected-(MOD1-FENCE_D11-Pad26)" "unconnected-(MOD1-NC-Pad1)" "unconnected-(MOD1-RESET-Pad3)" "unconnected-(MOD1-SCL-Pad32)" "unconnected-(MOD1-SDA-Pad31)" "unconnected-(MOD1-TPS_D13-Pad28)" "unconnected-(MOD1-VIN-Pad8)" "unconnected-(P1-Pin_4-Pad4)" "unconnected-(P1-Pin_5-Pad5)" "unconnected-(U4-ALERT-Pad3)" "unconnected-(U6-RST-Pad11)" (circuit - (use_via "Via[0-1]_600:300_um") + (use_via "Via[0-3]_600:300_um") ) (rule (width 200) (clearance 200) ) ) + (class PWR_MID 24V IGN_IN SW_FAN + (circuit + (use_via "Via[0-3]_800:400_um") + ) + (rule + (width 1000) + (clearance 200) + ) + ) ) (wiring + (wire (path F.Cu 1500 155452 -56185.8 155452 -56323.1)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 168192 -59323.1 169648 -57867)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 188746 -57867 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 169648 -57867 188746 -57867)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 145054 -46323.1 151533 -52802.2 152068 -52802.2 155452 -56185.8)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 194265 -63386.8 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 201342 -61823.1 199778 -63386.8)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 138292 -46323.1 145054 -46323.1)(net /SYS5V)(type route)) + (wire (path F.Cu 1500 199778 -63386.8 194265 -63386.8)(net /SYS5V)(type route)) + (wire (path B.Cu 1500 157534 -58405.6 189284 -58405.6)(net /SYS5V)(type route)) + (wire (path B.Cu 1500 155452 -56323.1 157534 -58405.6)(net /SYS5V)(type route)) + (wire (path In2.Cu 1500 150372 -74103.1 150372 -64033.5 155452 -58953.5 155452 -56323.1)(net /SYS5V)(type route)) + (wire (path B.Cu 200 163333 -77836.4 173205 -77836.4 174192 -78823.1)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 126209 -53120.5 138642 -53120.5)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 141482 -56716.8 144349 -59584)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 141482 -55960.4 141482 -56716.8)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 119843 -46323.1 119843 -46755)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 138642 -53120.5 141482 -55960.4)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 119843 -46755 126209 -53120.5)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 144349 -59584 158919 -59584 160281 -60946)(net /DIN_4G)(type route)) + (wire (path B.Cu 200 118692 -46323.1 119843 -46323.1)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 176487 -78823.1 189284 -66025.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 174192 -78823.1 176487 -78823.1)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 160281 -60946 160281 -74783.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 194364 -66025.6 189284 -66025.6)(net /DIN_4G)(type route)) + (wire (path In2.Cu 200 160281 -74783.6 163333 -77836.4)(net /DIN_4G)(type route)) + (wire (path F.Cu 200 196542 -84823.1 199123 -84823.1)(net GND)(type route)) + (wire (path F.Cu 200 199100 -92850 199073 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 129479 -118323 128262 -118323)(net GND)(type route)) + (wire (path F.Cu 200 198042 -61823.1 197782 -61823.1)(net GND)(type route)) + (wire (path F.Cu 200 196542 -92823.1 199073 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 137742 -112373 137692 -112323)(net GND)(type route)) + (wire (path F.Cu 200 121742 -94323.1 121242 -94823.1)(net GND)(type route)) + (wire (path F.Cu 200 137742 -113983 137742 -112373)(net GND)(type route)) + (wire (path F.Cu 200 172327 -92823.1 172300 -92850)(net GND)(type route)) + (wire (path F.Cu 1000 100542 -74323.1 99291.6 -74323.1)(net GND)(type route)) + (wire (path F.Cu 200 124892 -117923 125862 -117923 126002 -118063)(net GND)(type route)) + (wire (path F.Cu 200 172800 -80800 172823 -80823.1)(net GND)(type route)) + (wire (path F.Cu 200 132902 -118823 137742 -113983)(net GND)(type route)) + (wire (path F.Cu 200 154815 -63373.1 154882 -63306.3)(net GND)(type route)) + (wire (path F.Cu 200 184129 -63323.1 184506 -62946.4)(net GND)(type route)) + (wire (path F.Cu 200 199123 -84823.1 199150 -84850)(net GND)(type route)) + (wire (path F.Cu 200 152367 -64323.1 147692 -64323.1)(net GND)(type route)) + (wire (path F.Cu 200 121242 -94823.1 119792 -94823.1)(net GND)(type route)) + (wire (path F.Cu 200 153317 -63373.1 152367 -64323.1)(net GND)(type route)) + (wire (path F.Cu 200 166542 -59323.1 165740 -58521.1)(net GND)(type route)) + (wire (path F.Cu 200 184506 -62946.4 187990 -62946.4)(net GND)(type route)) + (wire (path F.Cu 200 161855 -58521.1 160694 -59682.2)(net GND)(type route)) + (wire (path F.Cu 200 126002 -118063 128002 -118063)(net GND)(type route)) + (wire (path F.Cu 200 174192 -92823.1 172327 -92823.1)(net GND)(type route)) + (wire (path F.Cu 200 165740 -58521.1 161855 -58521.1)(net GND)(type route)) + (wire (path F.Cu 200 128002 -118063 128262 -118323)(net GND)(type route)) + (wire (path F.Cu 200 153317 -63373.1 154815 -63373.1)(net GND)(type route)) + (wire (path F.Cu 200 130904 -118823 132902 -118823)(net GND)(type route)) + (wire (path F.Cu 200 174192 -80823.1 172823 -80823.1)(net GND)(type route)) + (wire (path F.Cu 200 197782 -61823.1 194364 -58405.6)(net GND)(type route)) + (wire (path In2.Cu 200 155615 -62572.8 157803 -62572.8)(net GND)(type route)) + (wire (path In2.Cu 200 194364 -58405.6 192531 -58405.6)(net GND)(type route)) + (wire (path In2.Cu 200 157803 -62572.8 160694 -59682.2)(net GND)(type route)) + (wire (path In2.Cu 200 192531 -58405.6 187990 -62946.4)(net GND)(type route)) + (wire (path In2.Cu 200 154882 -63306.3 155615 -62572.8)(net GND)(type route)) + (wire (path F.Cu 200 120490 -67486.2 102379 -67486.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100542 -72860.5 100542 -69323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102379 -67486.2 100542 -69323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 97851.6 -82803.1 97446.6 -83208.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 98258.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 96956.6 -83208.1 96841.6 -83323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 97446.6 -83208.1 96956.6 -83208.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 102192 -74323.1)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 102004 -74323.1 100542 -72860.5)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100817 -83872.7 100361 -84328.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 98258.1 -78069.3 98158.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path F.Cu 200 100817 -83323.1 100817 -83872.7)(net IGN_SENSE)(type route)) + (wire (path B.Cu 200 121429 -67486.2 120490 -67486.2)(net IGN_SENSE)(type route)) + (wire (path B.Cu 200 132592 -56323.1 121429 -67486.2)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97853.1 -78374.4 98158.1 -78069.3)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97853.1 -82801.7 97853.1 -78374.4)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -82803.1 97851.6 -83206.7)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -82803.1 97853.1 -82801.7)(net IGN_SENSE)(type route)) + (wire (path In2.Cu 200 97851.6 -83206.7 98973.1 -84328.2 100361 -84328.2)(net IGN_SENSE)(type route)) + (wire (path F.Cu 1000 171692 -54799 171692 -54633.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -47823.1 183392 -49214.2 183392 -49005.2)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170877 -54799 171692 -54799)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 172322 -55429.6 171692 -54799)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170397 -44118.2 169192 -45323.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -49005.2 178505 -44118.2 170397 -44118.2)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 183392 -49214.2 182627 -49978.6 182627 -51369.7 178567 -55429.6)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 168192 -63823.1 166684 -63823.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 178567 -55429.6 172322 -55429.6)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 170313 -55362.6 170877 -54799)(net SW_FAN)(type route)) + (wire (path In2.Cu 1000 170313 -55362.6 170313 -60194.3 166684 -63823.1)(net SW_FAN)(type route)) + (wire (path F.Cu 1000 95479.9 -85145.6 95479.9 -82751.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 98837.1 -79472.8 99038.8 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 170298 -73436 198579 -73436)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 174274 -46687.7 176504 -46687.7)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 198579 -73436 210192 -61823.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -80323.1 164892 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 92191.6 -88433.9 95479.9 -85145.6)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 99038.8 -79271.1 164892 -79271.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -78842.6 170298 -73436)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 179603 -49835.2 178792 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 191192 -47823.1 191192 -49391.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 178792 -49835.2 178792 -51223.1)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 191192 -49391.1 190531 -50051.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 164892 -79271.1 164892 -78842.6)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 176504 -46687.7 178792 -48974.9 178792 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 95479.9 -82751.9 98759.1 -79472.8 98837.1 -79472.8)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 173042 -45455.8 174274 -46687.7)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 92191.6 -98323.1 92191.6 -88433.9)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 173042 -45323.1 173042 -45455.8)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 190531 -50052 190531 -50051.9)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 198421 -50052 190531 -50052)(net /5V_FAN)(type route)) + (wire (path B.Cu 1000 210192 -61823.1 198421 -50052)(net /5V_FAN)(type route)) + (wire (path In2.Cu 1000 190314 -49835.2 179603 -49835.2)(net /5V_FAN)(type route)) + (wire (path In2.Cu 1000 190531 -50051.9 190314 -49835.2)(net /5V_FAN)(type route)) + (wire (path F.Cu 1000 98084.2 -100216 102590 -100216)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 107183 -96377.2 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 107129 -96323.1 107183 -96377.2)(net /FAN_RET)(type route)) + (wire (path F.Cu 1000 96191.6 -98323.1 98084.2 -100216)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 138289 -93500 138077 -93287.7)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122351 -93362 115854 -93362)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 126177 -93500 125896 -93219.3)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 129723 -93500 126177 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 111851 -93200.5 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 130862 -93809.4 130032 -93809.4)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122515 -93219.3 122362 -93373.1)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 154715 -93359.8 154575 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 135761 -93288.9 131382 -93288.9)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 138077 -93287.7 135762 -93287.7)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 115693 -93200.5 111851 -93200.5)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 135762 -93287.7 135761 -93288.9)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 122362 -93373.1 122351 -93362)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 125896 -93219.3 122515 -93219.3)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 115854 -93362 115693 -93200.5)(net /FAN_RET)(type route)) + (wire (path B.Cu 750 130032 -93809.4 129723 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 154575 -93500 138289 -93500)(net /FAN_RET)(type route)) + (wire (path B.Cu 1000 131382 -93288.9 130862 -93809.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 108674 -96482.3 108674 -96377.2)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 169143 -78932.1 154715 -93359.8)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 196064 -60271.9 192081 -60271.9 188028 -64325.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 182347 -64325.4 169143 -77529.2)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 197013 -59323.1 196064 -60271.9)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 188028 -64325.4 182347 -64325.4)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 102590 -100216 104941 -100216)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 169143 -77529.2 169143 -78932.1)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 210192 -59323.1 197013 -59323.1)(net /FAN_RET)(type route)) + (wire (path In2.Cu 1000 104941 -100216 108674 -96482.3)(net /FAN_RET)(type route)) + (wire (path F.Cu 200 175017 -59323.1 175017 -59560.9)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 177367 -59323.1 175017 -59323.1)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 173407 -53346.3 171708 -53346.3)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 175017 -59560.9 174361 -60216.8)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 171708 -53346.3 171692 -53363.1)(net /EN_FAN)(type route)) + (wire (path In2.Cu 200 173407 -59262.7 173407 -53346.3)(net /EN_FAN)(type route)) + (wire (path In2.Cu 200 174361 -60216.8 173407 -59262.7)(net /EN_FAN)(type route)) + (wire (path F.Cu 200 199079 -44435.6 199079 -48323.1)(net /BLED2)(type route)) + (wire (path F.Cu 200 199192 -44323.1 199079 -44435.6)(net /BLED2)(type route)) + (wire (path F.Cu 1500 119022 -107288 116832 -109478)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 120309 -100012 126502 -100012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 121092 -90453.1 121242 -90603.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119022 -107288 119151 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129242 -97272.5 129242 -96323.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129891 -89262.7 129892 -89263.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126861 -89262.7 129891 -89262.7)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 120542 -89873.1 121092 -90423.1 121092 -90453.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 210192 -108323 210019 -108323)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119542 -89873.1 120542 -89873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119382 -89423.1 119382 -89713.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -95993.1 143252 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119151 -107416 154762 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 173543 -104510 173543 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -107416 167047 -107416)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126502 -100012 129242 -97272.5)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 91715.6 -111012 91935.6 -111012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 167047 -107416 169640 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 172568 -104823 173543 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 171592 -104823 169640 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 154762 -107416 154762 -95993.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 117448 -102873 120309 -100012)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 801.4 91715.6 -112024 91416.6 -112323)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 129892 -89263.1 134672 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 177187 -100866 173543 -104510)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 210019 -108323 202561 -100866)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 119022 -107288 117448 -105714 117448 -102873)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 93354.2 -109593 93354.2 -109585)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 91935.6 -111012 93354.2 -109593)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 801.4 91715.6 -111012 91715.6 -112024)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 121242 -90603.1 121242 -91873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 119382 -89713.1 119542 -89873.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 202561 -100866 177187 -100866)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 126822 -89223.1 126861 -89262.7)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 172568 -104823 171592 -104823)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 1500 134672 -84483.1 143252 -84483.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119492 -89423.1 119612 -89303.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 124472 -92033.1 125532 -90973.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1000 126822 -89223.1 126752 -89223.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119382 -89423.1 119492 -89423.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1500 116832 -109478 93460.6 -109478)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 124472 -92083.1 124472 -92033.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 119612 -89303.1 120872 -89303.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1500 93460.6 -109478 93354.2 -109585)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 123652 -92083.1 124472 -92083.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 1000 126752 -89223.1 126702 -89272.7)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 125532 -90973.1 125532 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 750 125542 -90433.1 125532 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 126702 -89272.7 125542 -90433.1)(net /BAT_PLUS)(type route)) + (wire (path B.Cu 500 120872 -89303.1 123652 -92083.1)(net /BAT_PLUS)(type route)) + (wire (path F.Cu 200 104619 -105396 115743 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 124343 -93823.1 123692 -93823.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125472 -94023.1 125281 -94023.1)(net /NTC)(type route)) + (wire (path F.Cu 200 124443 -93723.1 124343 -93823.1)(net /NTC)(type route)) + (wire (path F.Cu 200 102692 -107323 104619 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 124981 -93723.1 124443 -93723.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125281 -94023.1 124981 -93723.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125492 -94043.1 125472 -94023.1)(net /NTC)(type route)) + (wire (path F.Cu 200 125532 -94123.1 125492 -94083.1 125492 -94043.1)(net /NTC)(type route)) + (wire (path B.Cu 200 128135 -94457.5 129547 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 126120 -94245 127923 -94245)(net /NTC)(type route)) + (wire (path B.Cu 200 137259 -94090.6 137746 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 202478 -94457.5 210192 -102171)(net /NTC)(type route)) + (wire (path B.Cu 200 127923 -94245 128135 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 137258 -94089.4 137259 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 136093 -94090.6 136094 -94089.4)(net /NTC)(type route)) + (wire (path B.Cu 200 125702 -94253.1 125712 -94263.1 126102 -94263.1)(net /NTC)(type route)) + (wire (path B.Cu 200 129547 -94457.5 129700 -94611.1 131194 -94611.1)(net /NTC)(type route)) + (wire (path B.Cu 200 125532 -94123.1 125662 -94253.1)(net /NTC)(type route)) + (wire (path B.Cu 200 137746 -94090.6 138113 -94457.5)(net /NTC)(type route)) + (wire (path B.Cu 200 136094 -94089.4 137258 -94089.4)(net /NTC)(type route)) + (wire (path B.Cu 200 210192 -102171 210192 -103323)(net /NTC)(type route)) + (wire (path B.Cu 200 131194 -94611.1 131714 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 125662 -94253.1 125702 -94253.1)(net /NTC)(type route)) + (wire (path B.Cu 200 131714 -94090.6 136093 -94090.6)(net /NTC)(type route)) + (wire (path B.Cu 200 126102 -94263.1 126120 -94245)(net /NTC)(type route)) + (wire (path B.Cu 200 138113 -94457.5 202478 -94457.5)(net /NTC)(type route)) + (wire (path In2.Cu 200 116719 -105396 125772 -96343.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 125772 -94363.1 125532 -94123.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 125772 -96343.1 125772 -94363.1)(net /NTC)(type route)) + (wire (path In2.Cu 200 115743 -105396 116719 -105396)(net /NTC)(type route)) + (wire (path F.Cu 200 117352 -56323.1 118503 -57474.8 124193 -57474.8)(net /NRST)(type route)) + (wire (path B.Cu 200 199192 -133323 205692 -133323)(net /NRST)(type route)) + (wire (path In2.Cu 200 210167 -80073.1 205692 -84548.1)(net /NRST)(type route)) + (wire (path In2.Cu 200 144462 -89823.7 184842 -130204)(net /NRST)(type route)) + (wire (path In2.Cu 200 141482 -73733.8 141482 -76531.3)(net /NRST)(type route)) + (wire (path In2.Cu 200 205692 -84548.1 205692 -133323)(net /NRST)(type route)) + (wire (path In2.Cu 200 184842 -130204 196072 -130204)(net /NRST)(type route)) + (wire (path In2.Cu 200 125223 -57474.8 141482 -73733.8)(net /NRST)(type route)) + (wire (path In2.Cu 200 141482 -76531.3 144462 -79511.3 144462 -89823.7)(net /NRST)(type route)) + (wire (path In2.Cu 200 124193 -57474.8 125223 -57474.8)(net /NRST)(type route)) + (wire (path In2.Cu 200 196072 -130204 199192 -133323)(net /NRST)(type route)) + (wire (path F.Cu 200 175842 -49448.1 175842 -52698.1)(net CC_FAN)(type route)) + (wire (path F.Cu 1000 185607 -115685 184346 -115685)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 187097 -116027 185949 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 163792 -118323 165493 -118323)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 200097 -114478 198548 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 188692 -107616 188692 -109823)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 183752 -115091 168726 -115091)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 186492 -103823 188692 -106023)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 185949 -116027 185607 -115685)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 168726 -115091 165493 -118323)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 198548 -116027 187097 -116027)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 184346 -115685 183752 -115091)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 188692 -106023 188692 -107616)(net /SW3_NODE)(type route)) + (wire (path In2.Cu 1000 187097 -109211 188692 -107616)(net /SW3_NODE)(type route)) + (wire (path In2.Cu 1000 187097 -116027 187097 -109211)(net /SW3_NODE)(type route)) + (wire (path F.Cu 1000 171223 -113084 141911 -113084)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 200097 -113208 202137 -113208)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 157045 -62479.4 156118 -63406.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 157045 -53576.6 157045 -62479.4)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 155281 -64323.1 156118 -63486.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 171617 -113477 193556 -113477)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 174078 -95373.1 171760 -97690.9)(net /SW_5V)(type route)) + (wire (path F.Cu 601 194877 -113477 195147 -113208)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 210192 -95323.1 179742 -95323.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 154692 -51223.1 157045 -53576.6)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 202137 -113208 202152 -113193)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 155192 -64323.1 155281 -64323.1)(net /SW_5V)(type route)) + (wire (path F.Cu 601 193556 -113477 194877 -113477)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 141911 -113084 125412 -129583)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 179742 -95323.1 179692 -95373.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 171617 -113477 171223 -113084)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 179692 -95373.1 174078 -95373.1)(net /SW_5V)(type route)) + (wire (path F.Cu 1000 156118 -63486.1 156118 -63406.1)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 196852 -118493 176633 -118493)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 202152 -113193 196852 -118493)(net /SW_5V)(type route)) + (wire (path B.Cu 1000 176633 -118493 171617 -113477)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 167171 -102280 171760 -97690.9)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 156118 -63406.1 157010 -64297.8 157010 -87333.1)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 167171 -109032 167171 -102280)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 153505 -90838.3 153505 -93892)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 157010 -87333.1 153505 -90838.3)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 171617 -113477 167171 -109032)(net /SW_5V)(type route)) + (wire (path In2.Cu 1000 153505 -93892 161893 -102280 167171 -102280)(net /SW_5V)(type route)) + (wire (path F.Cu 200 203712 -111938 200097 -111938)(net /COMP3)(type route)) + (wire (path F.Cu 200 179937 -117393 200252 -117393)(net /COMP3)(type route)) + (wire (path F.Cu 200 178867 -116323 179937 -117393)(net /COMP3)(type route)) + (wire (path F.Cu 200 200252 -117393 203712 -113933 203712 -111938)(net /COMP3)(type route)) + (wire (path F.Cu 200 180867 -109498 181474 -109498)(net /FB3)(type route)) + (wire (path F.Cu 200 200097 -110668 197015 -110668)(net /FB3)(type route)) + (wire (path F.Cu 200 178692 -107323 180867 -109498)(net /FB3)(type route)) + (wire (path F.Cu 200 197015 -110668 196891 -110544)(net /FB3)(type route)) + (wire (path F.Cu 200 180342 -102323 188670 -102323)(net /FB3)(type route)) + (wire (path In2.Cu 200 196891 -110544 188670 -102323)(net /FB3)(type route)) + (wire (path In2.Cu 200 181474 -109498 188650 -102323 188670 -102323)(net /FB3)(type route)) + (wire (path F.Cu 200 195147 -111938 194484 -112601 179469 -112601 178692 -111823)(net /FREQ3)(type route)) + (wire (path F.Cu 200 192976 -114752 194873 -114752 195147 -114478)(net /BST3)(type route)) + (wire (path F.Cu 200 187142 -109823 187142 -107718)(net /BST3)(type route)) + (wire (path In2.Cu 200 189077 -106797 192976 -110696)(net /BST3)(type route)) + (wire (path In2.Cu 200 188062 -106797 189077 -106797)(net /BST3)(type route)) + (wire (path In2.Cu 200 192976 -110696 192976 -114752)(net /BST3)(type route)) + (wire (path In2.Cu 200 187142 -107718 188062 -106797)(net /BST3)(type route)) + (wire (path F.Cu 200 195079 -44435.6 195079 -48323.1)(net /BLED1)(type route)) + (wire (path F.Cu 200 195192 -44323.1 195079 -44435.6)(net /BLED1)(type route)) + (wire (path F.Cu 200 94447.1 -110943 94447.1 -109167)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 91416.6 -116323 93066.6 -114673)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93779.8 -108499 92677.9 -108499)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -112323 94447.1 -110943)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 94447.1 -109167 93779.8 -108499)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 92677.9 -108499 92096.6 -109080)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 97108.9 -113131 97916.6 -112323)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -113131 93066.6 -112323)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 93066.6 -114673 93066.6 -113131 97108.9 -113131)(net /BAT_SENSE)(type route)) + (wire (path B.Cu 200 92198.6 -67700.9 108514 -67700.9 119892 -56323.1)(net /BAT_SENSE)(type route)) + (wire (path In2.Cu 200 90491.4 -107475 92096.6 -109080)(net /BAT_SENSE)(type route)) + (wire (path In2.Cu 200 92198.6 -67700.9 90491.4 -69408.1 90491.4 -107475)(net /BAT_SENSE)(type route)) + (wire (path F.Cu 200 163042 -59323.1 163042 -60171.8 161642 -61571.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 122432 -56323.1 123607 -55147.7)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 136402 -55959.1 136402 -56716.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 141635 -61949.4 161264 -61949.4)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 135590 -55147.7 136402 -55959.1)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 161264 -61949.4 161642 -61571.2)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 136402 -56716.2 141635 -61949.4)(net /PWR_CTRL)(type route)) + (wire (path B.Cu 200 123607 -55147.7 135590 -55147.7)(net /PWR_CTRL)(type route)) + (wire (path F.Cu 200 149373 -81460.8 155736 -87823.1 207692 -87823.1)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 149373 -81323.1 149373 -81460.8)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 209040 -89171.4 210192 -89171.4)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 210192 -90323.1 210192 -89171.4)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 148272 -81323.1 149373 -81323.1)(net /GNSS_TX)(type route)) + (wire (path F.Cu 200 207692 -87823.1 209040 -89171.4)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 133931 -65282.9 124972 -56323.1)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 135598 -65282.9 133931 -65282.9)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 144022 -75971.4 144022 -73706.3)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 148272 -81323.1 148272 -80221.4 144022 -75971.4)(net /GNSS_TX)(type route)) + (wire (path In2.Cu 200 144022 -73706.3 135598 -65282.9)(net /GNSS_TX)(type route)) + (wire (path B.Cu 200 158413 -87823.1 151913 -81323.1)(net /GNSS_RX)(type route)) + (wire (path B.Cu 200 210192 -87823.1 158413 -87823.1)(net /GNSS_RX)(type route)) + (wire (path B.Cu 200 150812 -81323.1 151913 -81323.1)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 146562 -73708 146562 -75971.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 134709 -61855.3 146562 -73708)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 127512 -56323.1 133044 -61855.3)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 146562 -75971.4 150812 -80221.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 150812 -81323.1 150812 -80221.4)(net /GNSS_RX)(type route)) + (wire (path In2.Cu 200 133044 -61855.3 134709 -61855.3)(net /GNSS_RX)(type route)) + (wire (path F.Cu 200 95416.6 -116323 98324.8 -113415)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 106092 -112323 106832 -111583)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 106092 -112323 103742 -112323)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 102650 -113415 103742 -112323)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 98324.8 -113415 102650 -113415)(net /5V_SENSE)(type route)) + (wire (path B.Cu 200 130052 -56323.1 115962 -70412.6 94238.2 -70412.6)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 94238.2 -70412.6 92764.9 -71886 92764.9 -97592.9)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 106755 -111583 106832 -111583)(net /5V_SENSE)(type route)) + (wire (path In2.Cu 200 92764.9 -97592.9 106755 -111583)(net /5V_SENSE)(type route)) + (wire (path F.Cu 200 115742 -112323 118142 -112323 121716 -108749 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path B.Cu 200 210192 -121323 176973 -121323 169737 -114087)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152455 -95314.8 152455 -97248.9)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152807 -97601.5 153252 -97601.5)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 142752 -56323.1 142752 -67123.1)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152455 -97248.9 152807 -97601.5)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 142752 -67123.1 149102 -73473.1 149102 -75898.1 152177 -78973.9)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 169737 -114087 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 152177 -78973.9 152177 -95037.4 152455 -95314.8)(net /NTC_TEMP)(type route)) + (wire (path In2.Cu 200 153252 -97601.5 164399 -108749)(net /NTC_TEMP)(type route)) + (wire (path F.Cu 200 187004 -114635 187192 -114823)(net /COMP3_C)(type route)) + (wire (path F.Cu 200 185252 -114635 187004 -114635)(net /COMP3_C)(type route)) + (wire (path F.Cu 200 180517 -116323 180985 -116791 185103 -116791)(net /COMP3_C)(type route)) + (wire (path In2.Cu 200 185252 -114635 185103 -114784 185103 -116791)(net /COMP3_C)(type route)) + (wire (path F.Cu 1500 130042 -103378 130042 -104323)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139938 -98598.2 142011 -96525)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 121305 -101985 124692 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119466 -91546.2 118024 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -91323.1 134042 -90777.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139819 -99823.1 139938 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 138622 -101293 132642 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 115034 -91546.2 112720 -89232.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 142692 -96525 142692 -94823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 601 112082 -87882.3 110261 -87882.3)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110242 -87863.1 110242 -86593.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -101293 132642 -92722.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139546 -100369 139819 -100096)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -90777.2 134951 -89867.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 120166 -91045.8 119967 -91045.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 124692 -101985 128649 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 126424 -91189.8 125649 -91964.4)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139938 -99823.1 139938 -98598.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 136885 -90323.1 139940 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 112720 -89232.7 112720 -88520.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119192 -104099 121305 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 112720 -88520.1 112082 -87882.3)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 124692 -104323 124692 -101985)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 119466 -92497.9 119792 -92823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134951 -89867.7 136430 -89867.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139819 -100096 139819 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119192 -104323 119192 -104099)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 134042 -91323.1 133908 -91189.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -101293 132127 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 139546 -100369 138622 -101293)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 136430 -89867.7 136885 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 133908 -91189.8 126424 -91189.8)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132127 -101293 130042 -103378)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139938 -99823.1 140092 -99823.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 128649 -101985 130042 -103378)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 119466 -91546.2 119466 -92497.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1049.8 139940 -90323.1 140092 -90323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 119967 -91045.8 119466 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 120166 -91045.8 120166 -91297.9)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110251 -87872.7 110242 -87863.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 118024 -91546.2 115034 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 110242 -86593.1 110242 -85323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 118024 -91808.1 118024 -91546.2)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 132642 -92722.9 134042 -91323.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 250.2 120166 -91297.9 120742 -91873.1)(net /MAIN5V)(type route)) + (wire (path F.Cu 601 110261 -87882.3 110251 -87872.7)(net /MAIN5V)(type route)) + (wire (path F.Cu 1500 142011 -96525 142692 -96525)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 109812 -83596.2 118024 -91808.1)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 101516 -77180.1 101516 -81198.9 103288 -82970.8)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 103846 -82970.8 104472 -83596.2 109812 -83596.2)(net /MAIN5V)(type route)) + (wire (path B.Cu 1500 103288 -82970.8 103846 -82970.8)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 132135 -42666.6 135792 -46323.1)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125618 -92086.6 125618 -91995.2)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 100536 -62101.7 96374.8 -57940.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125126 -92579.4 125618 -92086.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 118796 -92579.4 125126 -92579.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 96374.8 -45076.4 98784.6 -42666.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 96374.8 -57940.4 96374.8 -45076.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 98784.6 -42666.6 132135 -42666.6)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 100536 -76200.4 100536 -62101.7)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 101516 -77180.1 100536 -76200.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 125618 -91995.2 125649 -91964.4)(net /MAIN5V)(type route)) + (wire (path In2.Cu 1500 118024 -91808.1 118796 -92579.4)(net /MAIN5V)(type route)) + (wire (path F.Cu 200 93366.6 -94323.1 93366.6 -93338.1)(net FAN_PWM)(type route)) + (wire (path B.Cu 200 134564 -56323.1 118720 -72166.6 96481.1 -72166.6)(net FAN_PWM)(type route)) + (wire (path B.Cu 200 135132 -56323.1 134564 -56323.1)(net FAN_PWM)(type route)) + (wire (path In2.Cu 200 93366.6 -75281 96481.1 -72166.6)(net FAN_PWM)(type route)) + (wire (path In2.Cu 200 93366.6 -93338.1 93366.6 -75281)(net FAN_PWM)(type route)) + (wire (path F.Cu 200 99335.9 -93353.8 99480.8 -93353.8)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 98366.6 -94323.1 95016.6 -94323.1)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 105165 -95462.2 105254 -95373.1)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 98366.6 -94323.1 99335.9 -93353.8)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 102921 -95462.2 105165 -95462.2)(net FAN_GATE)(type route)) + (wire (path In2.Cu 200 99480.8 -93353.8 100813 -93353.8 102921 -95462.2)(net FAN_GATE)(type route)) + (wire (path F.Cu 200 124832 -95023.1 124732 -94923.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 125122 -95023.1 124832 -95023.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 112482 -91373.7 113057 -91373.7)(net /IGATE)(type route)) + (wire (path F.Cu 200 124272 -94823.1 123692 -94823.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 124732 -94923.1 124372 -94923.1 124272 -94823.1)(net /IGATE)(type route)) + (wire (path F.Cu 200 110242 -89133.1 112482 -91373.7)(net /IGATE)(type route)) + (wire (path F.Cu 200 125152 -94993.1 125122 -95023.1)(net /IGATE)(type route)) + (wire (path In2.Cu 200 125152 -94993.1 125122 -95023.1)(net /IGATE)(type route)) + (wire (path In2.Cu 200 119025 -95023.1 115376 -91373.7 113057 -91373.7)(net /IGATE)(type route)) + (wire (path In2.Cu 200 125122 -95023.1 119025 -95023.1)(net /IGATE)(type route)) + (wire (path F.Cu 1000 101654 -88323.1 105533 -88323.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -85323.1 115192 -86593.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 105533 -88323.1 113223 -96013.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 101654 -88323.1 106356 -83621.4)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 113223 -96013.1 118622 -96013.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 113490 -83621.4 115192 -85323.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 250.2 119112 -96503.1 119792 -95823.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -87863.1 115192 -89133.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 106356 -83621.4 113490 -83621.4)(net /VIN_SW)(type route)) + (wire (path F.Cu 1500 115192 -86593.1 115192 -87863.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 1000 118622 -96013.1 119112 -96503.1)(net /VIN_SW)(type route)) + (wire (path F.Cu 200 130904 -117823 130904 -113486)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 125340 -111499 126615 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 123492 -117923 123492 -114165 124917 -112740)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 126615 -111499 128917 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 124917 -111922 125340 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 126615 -111715 126615 -111499)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 130904 -113486 129742 -112323)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 124917 -112740 124917 -111922)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 128917 -111499 129742 -112323)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 127666 -75710.4 127666 -92441.5)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 141369 -75485.3 127891 -75485.3 127666 -75710.4)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 142752 -74103.1 141369 -75485.3)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 102202 -75710.4 127666 -75710.4)(net /I2C_SDA)(type route)) + (wire (path B.Cu 200 101976 -75485.3 102202 -75710.4)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 128109 -110221 128109 -92885)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 102040 -47474.8 102040 -46323.1)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101801 -75310.2 101801 -47713.4)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 128109 -92885 127666 -92441.5)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 103192 -46323.1 102040 -46323.1)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101976 -75485.3 101801 -75310.2)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 126615 -111715 128109 -110221)(net /I2C_SDA)(type route)) + (wire (path In2.Cu 200 101801 -47713.4 102040 -47474.8)(net /I2C_SDA)(type route)) + (wire (path F.Cu 200 129127 -117470 125742 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 105692 -46323.1 106843 -46323.1)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -113349 125742 -112323)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -113349 126634 -113349)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 107995 -47474.8 113853 -47474.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124340 -117617 124340 -117973)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 106843 -46323.1 107995 -47474.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -117470 125742 -113349)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 129479 -117823 129127 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124340 -117973 123590 -118723 123492 -118723)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 125742 -117470 124487 -117470)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 113853 -47474.8 114758 -48379.8)(net /I2C_SCL)(type route)) + (wire (path F.Cu 200 124487 -117470 124340 -117617)(net /I2C_SCL)(type route)) + (wire (path B.Cu 200 133072 -88991.5 129603 -92460)(net /I2C_SCL)(type route)) + (wire (path B.Cu 200 137323 -88991.5 133072 -88991.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 121162 -56719.9 121162 -54783.3 114758 -48379.8)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 137323 -88991.5 137323 -88059.6)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 140212 -74103.1 136109 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 131431 -73012 134442 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 129603 -110380 129603 -92460)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 134442 -70000.5 121162 -56719.9)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 131431 -82166.9 131431 -73012)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 126634 -113349 129603 -110380)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 136109 -70000.5 134442 -70000.5)(net /I2C_SCL)(type route)) + (wire (path In2.Cu 200 137323 -88059.6 131431 -82166.9)(net /I2C_SCL)(type route)) + (wire (path F.Cu 1000 186336 -111033 189663 -111033)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 173293 -118323 177293 -122323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 176067 -104039)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 182492 -122323 186044 -118771)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 189663 -111033 191153 -109543 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 171592 -118323 173293 -118323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 179343 -104039 186336 -111033)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 177293 -122323 182492 -122323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 200444 -118771 207472 -111743)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 179343 -104039)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 207472 -111743 205271 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 198904 -102323 200195 -103614)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 178692 -104039 178692 -102323)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 186044 -118771 200444 -118771)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 205271 -109543 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 200195 -103614 200195 -109543)(net /3V3_MODEM)(type route)) + (wire (path F.Cu 1000 198692 -102323 198904 -102323)(net /3V3_MODEM)(type route)) + (wire (path In2.Cu 1000 172812 -76202.9 174192 -74823.1)(net /3V3_MODEM)(type route)) + (wire (path In2.Cu 1000 176067 -104039 176067 -100298 172812 -97043.1 172812 -76202.9)(net /3V3_MODEM)(type route)) + (wire (path B.Cu 200 151196 -76823.1 174192 -76823.1)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 146833 -81185.4 151196 -76823.1)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 146833 -81323.1 146833 -81185.4)(net /DOUT_4G)(type route)) + (wire (path B.Cu 200 145732 -81323.1 146833 -81323.1)(net /DOUT_4G)(type route)) + (wire (path F.Cu 1500 104042 -98776.2 104042 -102323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101307 -107323 101042 -107323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99104.8 -87947.5 99104.8 -82832.5)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166798 -79716.7 166798 -79030.3)(net /VEH5V)(type route)) + (wire (path F.Cu 200 124672 -94323.1 123692 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 119032 -95323.1 119792 -95323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 117952 -94803.1 118028 -94803.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 98729.1 -88323.1 99104.8 -87947.5)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -90979.1 101385 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 111642 -97323.1 111642 -97291.4)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 108410 -94059.8 101385 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 98729.1 -88323.1 101385 -90979.1)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 101307 -107874 101307 -107323)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -94059.8 101385 -96014.7)(net /VEH5V)(type route)) + (wire (path F.Cu 200 123702 -94313.1 123692 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1001.8 99690.4 -97874.3 99241.6 -98323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166192 -80323.1 166798 -79716.7)(net /VEH5V)(type route)) + (wire (path F.Cu 1001.8 99690.4 -96791 99690.4 -97874.3)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101385 -96014.7 101333 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99690.4 -96791 100414 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101214 -80722.8 102876 -80722.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 102092 -112323 102092 -108857)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 104042 -102323 101307 -105058)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 111642 -97291.4 108410 -94059.8)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 100414 -96067.2 101333 -96067.2)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118070 -94761.2 118470 -94761.2)(net /VEH5V)(type route)) + (wire (path F.Cu 999.8 166192 -80070.7 166192 -80323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118028 -94803.1 118070 -94761.2)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 102191 -108758 101307 -107874)(net /VEH5V)(type route)) + (wire (path F.Cu 200 118470 -94761.2 119032 -95323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101333 -96067.2 104042 -98776.2)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 99104.8 -82832.5 101214 -80722.8)(net /VEH5V)(type route)) + (wire (path F.Cu 200 124692 -94303.1 124672 -94323.1)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 101307 -105058 101307 -107058)(net /VEH5V)(type route)) + (wire (path F.Cu 1500 102092 -108857 102191 -108758)(net /VEH5V)(type route)) + (wire (path F.Cu 801.4 101307 -107323 101307 -107058)(net /VEH5V)(type route)) + (wire (path B.Cu 200 117974 -94803.1 117952 -94803.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124452 -94313.1 124102 -93963.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 91341.6 -70003.1 91341.6 -65723.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 112462 -100293 110872 -100293)(net /VEH5V)(type route)) + (wire (path B.Cu 200 106042 -91903.1 87741.6 -73603.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 91341.6 -65723.1 93641.6 -63423.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124692 -94303.1 124662 -94333.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 122782 -95113.1 118284 -95113.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124572 -94313.1 124452 -94313.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 87741.6 -73603.1 91341.6 -70003.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124662 -94333.1 124592 -94333.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 93641.6 -63423.1 93641.6 -42433.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124592 -94333.1 124572 -94313.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 123932 -93963.1 122782 -95113.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 106042 -95463.1 106042 -91903.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 124102 -93963.1 123932 -93963.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 123302 -42433.1 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 118284 -95113.1 117974 -94803.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 117952 -94803.1 112462 -100293)(net /VEH5V)(type route)) + (wire (path B.Cu 200 93641.6 -42433.1 123302 -42433.1)(net /VEH5V)(type route)) + (wire (path B.Cu 200 110872 -100293 106042 -95463.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103228 -76003.8 103228 -74966.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -78226.4 103217 -77885)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 107967 -46736.5 107967 -46492.7 110091 -44368.6)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -74614.7 102876 -51827.7)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103217 -77885 103217 -76475.2)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 110091 -44368.6 125237 -44368.6)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 162924 -75156.4 162924 -60109.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -51827.7 107967 -46736.5)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103228 -74966.8 102876 -74614.7)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 127192 -46585.8 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 162924 -60109.4 153114 -50298.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 166798 -79030.3 162924 -75156.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 103217 -76475.2 102987 -76244.9)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102876 -80722.8 102876 -78226.4)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 125237 -44368.6 127192 -46323.1)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 130905 -50298.8 127192 -46585.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102987 -76244.9 102987 -76244.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 153114 -50298.8 130905 -50298.8)(net /VEH5V)(type route)) + (wire (path In2.Cu 1500 102987 -76244.8 103228 -76003.8)(net /VEH5V)(type route)) + (wire (path F.Cu 200 101070 -116264 101070 -115090)(net /LED_A)(type route)) + (wire (path F.Cu 200 99789.9 -107426 98794.6 -107426 98691.6 -107323)(net /LED_A)(type route)) + (wire (path F.Cu 200 101129 -116323 101070 -116264)(net /LED_A)(type route)) + (wire (path B.Cu 200 99789.9 -107426 177369 -107426)(net /LED_A)(type route)) + (wire (path In2.Cu 200 99789.9 -113809 99789.9 -107426)(net /LED_A)(type route)) + (wire (path In2.Cu 200 196970 -89823.1 194972 -89823.1)(net /LED_A)(type route)) + (wire (path In2.Cu 200 210167 -70825.2 206021 -74970.6 206021 -80771.8)(net /LED_A)(type route)) + (wire (path In2.Cu 200 101070 -115090 99789.9 -113809)(net /LED_A)(type route)) + (wire (path In2.Cu 200 206021 -80771.8 196970 -89823.1)(net /LED_A)(type route)) + (wire (path In2.Cu 200 210167 -70823.1 210167 -70825.2)(net /LED_A)(type route)) + (wire (path In2.Cu 200 194972 -89823.1 177369 -107426)(net /LED_A)(type route)) + (wire (path F.Cu 200 110777 -111539 110092 -112225 110092 -112323)(net USART1_RX)(type route)) + (wire (path B.Cu 200 128569 -82276.2 128569 -92441.5)(net USART1_RX)(type route)) + (wire (path B.Cu 200 129523 -81323.1 130073 -81323.1)(net USART1_RX)(type route)) + (wire (path B.Cu 200 128972 -81323.1 129523 -81323.1)(net USART1_RX)(type route)) + (wire (path B.Cu 200 135467 -75929.3 166040 -75929.3)(net USART1_RX)(type route)) + (wire (path B.Cu 200 130073 -81323.1 135467 -75929.3)(net USART1_RX)(type route)) + (wire (path B.Cu 200 129523 -81323.1 128569 -82276.2)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -48863.1 113652 -65323.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 166040 -75929.3 167919 -75929.3 187982 -55865.6)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128972 -81323.1 128972 -80221.4)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 116192 -46323.1 115964 -46323.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 189284 -55865.6 187982 -55865.6)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128972 -80221.4 128550 -80221.4)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -65323.1 122432 -74103.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 111558 -112320 126866 -112320)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 111192 -48863.1 113652 -48863.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 115964 -46323.1 113652 -48635.5)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128569 -110616 128569 -92441.5)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 126866 -112320 128569 -110616)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 128550 -80221.4 122432 -74103.1)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 110777 -111539 111558 -112320)(net USART1_RX)(type route)) + (wire (path In2.Cu 200 113652 -48635.5 113652 -48863.1)(net USART1_RX)(type route)) + (wire (path F.Cu 200 134492 -98820 134492 -99373)(net 3V3)(type route)) + (wire (path F.Cu 200 135318 -113147 132142 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 131903 -111079 125093 -111079)(net 3V3)(type route)) + (wire (path F.Cu 200 124892 -118723 124340 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 130493 -118300 130904 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 130495 -118323 130192 -118626)(net 3V3)(type route)) + (wire (path F.Cu 200 130265 -118072 130493 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 117792 -129583 117792 -128481)(net 3V3)(type route)) + (wire (path F.Cu 200 131316 -118300 132142 -117474)(net 3V3)(type route)) + (wire (path F.Cu 200 117792 -128481 124340 -121933)(net 3V3)(type route)) + (wire (path F.Cu 200 114092 -112323 114869 -113101)(net 3V3)(type route)) + (wire (path F.Cu 200 93541.6 -83323.1 93541.6 -83794.1)(net 3V3)(type route)) + (wire (path F.Cu 200 98191.6 -46323.1 94584.4 -46323.1)(net 3V3)(type route)) + (wire (path F.Cu 200 100042 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path F.Cu 200 128092 -112323 130265 -114496)(net 3V3)(type route)) + (wire (path F.Cu 200 93541.6 -83794.1 94149.1 -84401.6)(net 3V3)(type route)) + (wire (path F.Cu 200 123314 -113101 124092 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 130192 -118626 130192 -119004)(net 3V3)(type route)) + (wire (path F.Cu 200 100075 -102357 100042 -102323)(net 3V3)(type route)) + (wire (path F.Cu 200 130192 -119004 129871 -119325)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -113147 132142 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 97041.6 -107323 100075 -104290 100075 -102357)(net 3V3)(type route)) + (wire (path F.Cu 200 126045 -119325 125443 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 136142 -112323 135318 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -111318 131903 -111079)(net 3V3)(type route)) + (wire (path F.Cu 200 114092 -112323 111742 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118300 130904 -118323)(net 3V3)(type route)) + (wire (path F.Cu 200 124092 -112081 124092 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 129871 -119325 126045 -119325)(net 3V3)(type route)) + (wire (path F.Cu 200 125093 -111079 124092 -112081)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118323 130495 -118323)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -117474 132142 -113147)(net 3V3)(type route)) + (wire (path F.Cu 200 114869 -113101 123314 -113101)(net 3V3)(type route)) + (wire (path F.Cu 200 134167 -104323 133430 -103586)(net 3V3)(type route)) + (wire (path F.Cu 200 130265 -114496 130265 -118072)(net 3V3)(type route)) + (wire (path F.Cu 200 130904 -118300 131316 -118300)(net 3V3)(type route)) + (wire (path F.Cu 200 124340 -121933 124340 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 124892 -118723 125443 -118723)(net 3V3)(type route)) + (wire (path F.Cu 200 132142 -111318 132142 -112323)(net 3V3)(type route)) + (wire (path F.Cu 200 134492 -99373 134042 -99823.1)(net 3V3)(type route)) + (wire (path B.Cu 200 135245 -99573 150483 -99573)(net 3V3)(type route)) + (wire (path B.Cu 200 134492 -98820 135245 -99573)(net 3V3)(type route)) + (wire (path B.Cu 200 150483 -99573 153057 -96999.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 156330 -61293.4 155854 -61769.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 154907 -61769.4 152485 -64190.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -97843.5 98628.8 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 156646 -55886.9 156646 -60643.3)(net 3V3)(type route)) + (wire (path In2.Cu 200 134492 -102524 134492 -98820)(net 3V3)(type route)) + (wire (path In2.Cu 200 152485 -71136.8 155452 -74103.1)(net 3V3)(type route)) + (wire (path In2.Cu 200 97092.6 -71742.2 90247.9 -64897.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 152092 -54602.6 155362 -54602.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -76362.2 97092.6 -73418.7)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -84401.6 94149.1 -76362.2)(net 3V3)(type route)) + (wire (path In2.Cu 200 152679 -94522.5 153057 -94899.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 133430 -103586 134492 -102524)(net 3V3)(type route)) + (wire (path In2.Cu 200 153057 -94899.9 153057 -96999.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 90247.9 -64897.5 90247.9 -50659.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 117792 -129583 117792 -120918)(net 3V3)(type route)) + (wire (path In2.Cu 200 155452 -74103.1 152679 -76875.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 132142 -111318 132142 -104874)(net 3V3)(type route)) + (wire (path In2.Cu 200 99196.8 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 117792 -120918 99196.8 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 90247.9 -50659.5 94584.4 -46323.1)(net 3V3)(type route)) + (wire (path In2.Cu 200 98628.8 -102323 99126.1 -102323)(net 3V3)(type route)) + (wire (path In2.Cu 200 155854 -61769.4 154907 -61769.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 152485 -64190.9 152485 -71136.8)(net 3V3)(type route)) + (wire (path In2.Cu 200 152679 -76875.6 152679 -94522.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 94149.1 -84401.6 94149.1 -97843.5)(net 3V3)(type route)) + (wire (path In2.Cu 200 150372 -56323.1 152092 -54602.6)(net 3V3)(type route)) + (wire (path In2.Cu 200 156330 -60959.4 156330 -61293.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 156646 -60643.3 156330 -60959.4)(net 3V3)(type route)) + (wire (path In2.Cu 200 155362 -54602.6 156646 -55886.9)(net 3V3)(type route)) + (wire (path In2.Cu 200 97092.6 -73418.7 97092.6 -71742.2)(net 3V3)(type route)) + (wire (path In2.Cu 200 132142 -104874 133430 -103586)(net 3V3)(type route)) + (wire (path F.Cu 1000 91070.6 -62038.4 89256.9 -62038.4)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 89041.6 -56733.1 89041.6 -61823.1)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 89256.9 -62038.4 89041.6 -61823.1)(net /24V_IN)(type route)) + (wire (path F.Cu 1000 91451.6 -54323.1 89041.6 -56733.1)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 103321 -83220.8 99159.9 -79059.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124852 -90708.6 124469 -90326)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 123640 -90326 123239 -90726.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124469 -90326 123640 -90326)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 124852 -90708.6 124852 -90708.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 118996 -90726.9 118626 -90356.4 110878 -90356.4)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99159.9 -79059.6 99159.9 -77654.4 99084.4 -77578.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 125048 -90512.7 124852 -90708.6)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 172692 -133636 129569 -90512.7)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 110878 -90356.4 103743 -83220.8 103321 -83220.8)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 123239 -90726.9 118996 -90726.9)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99084.4 -70052.2 91070.6 -62038.4)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 99084.4 -77578.9 99084.4 -70052.2)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 129569 -90512.7 125048 -90512.7)(net /24V_IN)(type route)) + (wire (path In2.Cu 1000 172692 -133823 172692 -133636)(net /24V_IN)(type route)) + (wire (path F.Cu 200 173978 -49661.6 173978 -50210.9)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 175842 -47798.1 173978 -49661.6)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 172096 -52093.1 171692 -52093.1)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 173978 -50210.9 172096 -52093.1)(net COMP_FAN)(type route)) + (wire (path F.Cu 200 164692 -60134.8 164501 -60325.1)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 155563 -61161.3 148028 -61161.3)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 164692 -59323.1 164692 -60134.8)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 148028 -61161.3 145817 -63373.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 155563 -61161.3 155949 -61547.7)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 161752 -60325.1 164501 -60325.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 160530 -61547.7 161752 -60325.1)(net /BASE_LS)(type route)) + (wire (path B.Cu 200 155949 -61547.7 160530 -61547.7)(net /BASE_LS)(type route)) + (wire (path F.Cu 200 171692 -50823.1 172722 -49792.7)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 176267 -45323.1 174692 -45323.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 176566 -45323.1 176267 -45323.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 172722 -49792.7 173372 -49792.7)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 177545 -46302.1 176566 -45323.1)(net /FB_FAN)(type route)) + (wire (path In2.Cu 200 173372 -49792.7 174055 -49792.7 177545 -46302.1)(net /FB_FAN)(type route)) + (wire (path F.Cu 200 97169.2 -103451 99473.4 -103451)(net FAN_TACH_RAW)(type route)) + (wire (path F.Cu 200 96041.6 -102323 97169.2 -103451)(net FAN_TACH_RAW)(type route)) + (wire (path B.Cu 200 99473.4 -103451 100700 -102224 171920 -102224 175684 -98459.4)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 208460 -66238 208460 -70313)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210643 -55474.8 211485 -56316.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210192 -55474.8 210643 -55474.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 196950 -81823.1 192320 -81823.1)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 208460 -70313 196950 -81823.1)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 192320 -81823.1 175684 -98459.4)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 211485 -56316.8 211485 -63212.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 210192 -54323.1 210192 -55474.8)(net FAN_TACH_RAW)(type route)) + (wire (path In2.Cu 200 211485 -63212.8 208460 -66238)(net FAN_TACH_RAW)(type route)) + (wire (path F.Cu 200 107200 -78267.1 98866.2 -78267.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98462.2 -78671.1 96632.6 -78671.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101522 97691.6 -102323)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 115667 -69044 111002 -73708.9)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101522 98492.6 -101217)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 100891 -101522 98492.6 -101522)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 101692 -102323 100891 -101522)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 147661 -69044 115667 -69044)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98866.2 -78267.1 98462.2 -78671.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 98492.6 -101217 98373.9 -101217)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 111002 -74465 107200 -78267.1)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 111002 -73708.9 111002 -74465)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 147832 -68873.6 147661 -69044)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 147832 -56323.1 147832 -68873.6)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 96632.6 -99476.2 96632.6 -78671.1)(net FAN_TACH)(type route)) + (wire (path In2.Cu 200 98373.9 -101217 96632.6 -99476.2)(net FAN_TACH)(type route)) + (wire (path F.Cu 200 166742 -55441.5 166742 -55441.5)(net BST_FAN)(type route)) + (wire (path F.Cu 200 167642 -45323.1 168395 -46076.2)(net BST_FAN)(type route)) + (wire (path F.Cu 200 166742 -54633.1 166742 -55441.5)(net BST_FAN)(type route)) + (wire (path In2.Cu 200 166742 -47729.2 168395 -46076.2)(net BST_FAN)(type route)) + (wire (path In2.Cu 200 166742 -55441.5 166742 -47729.2)(net BST_FAN)(type route)) + (wire (path B.Cu 200 119892 -74103.1 121428 -72566.8)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 188585 -61644.6 194364 -55865.6)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 121428 -72566.8 170603 -72566.8)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 181526 -61644.6 188585 -61644.6)(net /USART1_TX)(type route)) + (wire (path B.Cu 200 170603 -72566.8 181526 -61644.6)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111062 -54619.6 111062 -65273.1)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111192 -47474.8 110904 -47474.8)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110040 -48338.5 110040 -53597.9)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111192 -46323.1 111192 -47474.8)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110040 -53597.9 111062 -54619.6)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 111062 -65273.1 119892 -74103.1)(net /USART1_TX)(type route)) + (wire (path In2.Cu 200 110904 -47474.8 110040 -48338.5)(net /USART1_TX)(type route)) + (wire (path F.Cu 1000 127332 -83542.7 131319 -83542.7)(net /SW_BAT)(type route)) + (wire (path F.Cu 1500 163792 -104823 163792 -91863.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 250.2 122242 -88633.1 122242 -91873.1 121742 -91873.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 1000 122242 -88633.1 127332 -83542.7)(net /SW_BAT)(type route)) + (wire (path B.Cu 1500 131319 -83542.7 134090 -83542.7 142411 -91863 163792 -91863 + 163792 -91863.1)(net /SW_BAT)(type route)) + (wire (path F.Cu 200 112272 -74103.1 113429 -75260.4)(net /BATLED3)(type route)) + (wire (path F.Cu 200 201429 -48323.1 201260 -48492.5 200007 -48492.5)(net /BATLED3)(type route)) + (wire (path F.Cu 200 113429 -75260.4 166527 -75260.4)(net /BATLED3)(type route)) + (wire (path In2.Cu 200 199741 -48226 193561 -48226 166527 -75260.4)(net /BATLED3)(type route)) + (wire (path In2.Cu 200 200007 -48492.5 199741 -48226)(net /BATLED3)(type route)) + (wire (path F.Cu 200 203192 -44323.1 203079 -44435.6 203079 -48323.1)(net /BLED3)(type route)) + (wire (path F.Cu 200 119792 -93823.1 115026 -93823.1)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 113192 -106044 113192 -107323)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 115026 -93823.1 114647 -94202.2)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 114271 -93827.1 114647 -94202.2)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 113192 -106044 112899 -105752)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 112899 -94126.5 113198 -93827.1)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 112899 -105752 112899 -94126.5)(net /CLPROG_TP)(type route)) + (wire (path In2.Cu 200 113198 -93827.1 114271 -93827.1)(net /CLPROG_TP)(type route)) + (wire (path F.Cu 200 202153 -51599.1 183645 -51599.1)(net /BATLED4)(type route)) + (wire (path F.Cu 200 116964 -71950.3 157823 -71950.3)(net /BATLED4)(type route)) + (wire (path F.Cu 200 114812 -74103.1 116964 -71950.3)(net /BATLED4)(type route)) + (wire (path F.Cu 200 164176 -65597.5 169831 -65597.5)(net /BATLED4)(type route)) + (wire (path F.Cu 200 205429 -48323.1 202153 -51599.1)(net /BATLED4)(type route)) + (wire (path F.Cu 200 157823 -71950.3 164176 -65597.5)(net /BATLED4)(type route)) + (wire (path In2.Cu 200 183645 -51783.7 183645 -51599.1)(net /BATLED4)(type route)) + (wire (path In2.Cu 200 169831 -65597.5 183645 -51783.7)(net /BATLED4)(type route)) + (wire (path F.Cu 200 207192 -44323.1 207079 -44435.6 207079 -48323.1)(net /BLED4)(type route)) + (wire (path F.Cu 200 94870.4 -105576 94166.9 -104873)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94870.4 -112044 94870.4 -105576)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94166.9 -104873 91816.6 -104873)(net EXT_LED)(type route)) + (wire (path F.Cu 200 94591.6 -112323 94870.4 -112044)(net EXT_LED)(type route)) + (wire (path F.Cu 200 91816.6 -104873 91816.6 -104779 91096.8 -104060)(net EXT_LED)(type route)) + (wire (path B.Cu 200 109241 -68611.8 121043 -56809.5)(net EXT_LED)(type route)) + (wire (path B.Cu 200 138632 -54743 140212 -56323.1)(net EXT_LED)(type route)) + (wire (path B.Cu 200 92929.4 -68611.8 109241 -68611.8)(net EXT_LED)(type route)) + (wire (path B.Cu 200 122309 -54743 138632 -54743)(net EXT_LED)(type route)) + (wire (path B.Cu 200 121043 -56809.5 121043 -56008.8 122309 -54743)(net EXT_LED)(type route)) + (wire (path In2.Cu 200 91096.8 -104060 91096.8 -70444.4 92929.4 -68611.8)(net EXT_LED)(type route)) + (wire (path F.Cu 200 124832 -95923.1 124702 -95793.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141392 -98771.4 141541 -98771.4)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124286 -95323.1 123692 -95323.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141541 -98771.4 141743 -98569.5)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124696 -95787.9 124696 -95733.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124832 -95933.1 124832 -95923.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124696 -95733.1 124286 -95323.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124832 -95923.1 124696 -95787.9)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 124702 -95793.1 124702 -95723.1)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 141392 -99823.1 141392 -98771.4)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125079 -95625.9 125365 -95625.9)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137579 -94492.3 141657 -98569.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 129534 -95012.8 131360 -95012.8)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 129414 -94892.5 129534 -95012.8)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 136259 -94492.3 136260 -94491.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137092 -94492.3 137579 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 126344 -94646.7 127757 -94646.7)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 141657 -98569.5 141743 -98569.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 127757 -94646.7 128002 -94892.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 131360 -95012.8 131881 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 128002 -94892.5 129414 -94892.5)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 136260 -94491.1 137091 -94491.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125365 -95625.9 126344 -94646.7)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124802 -95633.1 125072 -95633.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 131881 -94492.3 136259 -94492.3)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 125072 -95633.1 125079 -95625.9)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124752 -95853.1 124752 -95683.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124832 -95933.1 124752 -95853.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 124752 -95683.1 124802 -95633.1)(net /F0_SEL)(type route)) + (wire (path B.Cu 200 137091 -94491.1 137092 -94492.3)(net /F0_SEL)(type route)) + (wire (path F.Cu 200 93691.6 -105823 93691.6 -106635)(net /LED_K)(type route)) + (wire (path F.Cu 200 90663.9 -109662 90663.9 -116834)(net /LED_K)(type route)) + (wire (path F.Cu 200 90991.1 -117161 98416.4 -117161)(net /LED_K)(type route)) + (wire (path F.Cu 200 99254.1 -116323 100258 -117327)(net /LED_K)(type route)) + (wire (path F.Cu 200 98416.4 -117161 99254.1 -116323)(net /LED_K)(type route)) + (wire (path F.Cu 200 100258 -117327 106750 -117327 110969 -113108)(net /LED_K)(type route)) + (wire (path F.Cu 200 93691.6 -106635 90663.9 -109662)(net /LED_K)(type route)) + (wire (path F.Cu 200 90663.9 -116834 90991.1 -117161)(net /LED_K)(type route)) + (wire (path B.Cu 200 131851 -110718 134536 -108033)(net /LED_K)(type route)) + (wire (path B.Cu 200 110969 -113108 113360 -110718 131851 -110718)(net /LED_K)(type route)) + (wire (path B.Cu 200 134536 -108033 173947 -108033)(net /LED_K)(type route)) + (wire (path In2.Cu 200 196992 -87823.1 194157 -87823.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 197761 -82663.1 197761 -87054.2)(net /LED_K)(type route)) + (wire (path In2.Cu 200 208862 -69996.4 208862 -71562)(net /LED_K)(type route)) + (wire (path In2.Cu 200 194157 -87823.1 173947 -108033)(net /LED_K)(type route)) + (wire (path In2.Cu 200 208862 -71562 197761 -82663.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 197761 -87054.2 196992 -87823.1)(net /LED_K)(type route)) + (wire (path In2.Cu 200 210167 -69474.8 209383 -69474.8 208862 -69996.4)(net /LED_K)(type route)) + (wire (path In2.Cu 200 210167 -68323.1 210167 -69474.8)(net /LED_K)(type route)) + (wire (path F.Cu 200 177367 -69148.1 177367 -64823.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 178367 -70148.1 177367 -69148.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 182254 -62373.1 179817 -62373.1 177367 -64823.1)(net /Q6_BASE)(type route)) + (wire (path F.Cu 200 197429 -48323.1 196925 -48827.7 196018 -48827.7)(net /BATLED2)(type route)) + (wire (path B.Cu 200 181639 -60961.4 181693 -60961.4)(net /BATLED2)(type route)) + (wire (path B.Cu 200 119069 -72951.4 129670 -62351.1 180250 -62351.1 181639 -60961.4)(net /BATLED2)(type route)) + (wire (path B.Cu 200 109732 -74103.1 110883 -72951.4 119069 -72951.4)(net /BATLED2)(type route)) + (wire (path In2.Cu 200 196018 -48827.7 193827 -48827.7 181693 -60961.4)(net /BATLED2)(type route)) + (wire (path F.Cu 200 153093 -64469.4 153317 -64692.6)(net /SW_IN)(type route)) + (wire (path F.Cu 200 149329 -46323.1 152217 -49210.9)(net /SW_IN)(type route)) + (wire (path F.Cu 200 153317 -64692.6 153317 -65273.1)(net /SW_IN)(type route)) + (wire (path F.Cu 200 152217 -49210.9 152217 -51550.5)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 155100 -62171.1 156021 -62171.1)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 157048 -61143.6 157048 -55720.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 155487 -54159.6 154826 -54159.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 156021 -62171.1 157048 -61143.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 157048 -55720.6 155487 -54159.6)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 153093 -64469.4 153093 -64177.4 155100 -62171.1)(net /SW_IN)(type route)) + (wire (path In2.Cu 200 154826 -54159.6 152217 -51550.5)(net /SW_IN)(type route)) + (wire (path F.Cu 200 124054 -92460.3 123692 -92823.1)(net /PFI)(type route)) + (wire (path F.Cu 200 107471 -82492.5 107654 -82308.9)(net /PFI)(type route)) + (wire (path F.Cu 200 106504 -102323 106504 -97236.3)(net /PFI)(type route)) + (wire (path F.Cu 200 103328 -84222.5 105058 -82492.5)(net /PFI)(type route)) + (wire (path F.Cu 200 105692 -102323 106504 -102323 107542 -102323)(net /PFI)(type route)) + (wire (path F.Cu 200 105058 -82492.5 107471 -82492.5)(net /PFI)(type route)) + (wire (path F.Cu 200 124054 -91327.7 124054 -92460.3)(net /PFI)(type route)) + (wire (path B.Cu 200 115211 -82484.5 124054 -91327.7)(net /PFI)(type route)) + (wire (path B.Cu 200 107830 -82484.5 115211 -82484.5)(net /PFI)(type route)) + (wire (path B.Cu 200 107654 -82308.9 107830 -82484.5)(net /PFI)(type route)) + (wire (path In2.Cu 200 106504 -97236.3 103328 -94060.3 103328 -84222.5)(net /PFI)(type route)) + (wire (path F.Cu 200 160854 -68295.4 164176 -64973.5)(net /BATLED1)(type route)) + (wire (path F.Cu 200 107192 -74103.1 108343 -74103.1 108343 -73815.2)(net /BATLED1)(type route)) + (wire (path F.Cu 200 113863 -68295.4 160854 -68295.4)(net /BATLED1)(type route)) + (wire (path F.Cu 200 193429 -48679.1 193429 -48323.1)(net /BATLED1)(type route)) + (wire (path F.Cu 200 191111 -50997.4 193429 -48679.1)(net /BATLED1)(type route)) + (wire (path F.Cu 200 108343 -73815.2 113863 -68295.4)(net /BATLED1)(type route)) + (wire (path F.Cu 200 189563 -50997.4 191111 -50997.4)(net /BATLED1)(type route)) + (wire (path In2.Cu 200 174326 -66234.5 165437 -66234.5 164176 -64973.5)(net /BATLED1)(type route)) + (wire (path In2.Cu 200 189563 -50997.4 174326 -66234.5)(net /BATLED1)(type route)) + (wire (path F.Cu 200 118852 -94203.1 118982 -94333.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117642 -94203.1 117522 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 116944 -94323.1 116831 -94436.2)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 118982 -94333.1 118992 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 105042 -106776 105481 -106337)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 105042 -107323 105042 -106776)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117642 -94203.1 118852 -94203.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 118992 -94323.1 119792 -94323.1)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 117522 -94323.1 116944 -94323.1)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 106242 -75285.2 105070 -74113.3)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 117352 -74103.1 116170 -75285.2 106242 -75285.2)(net /CHRG_EN)(type route)) + (wire (path B.Cu 200 105070 -74113.3 98082.6 -74113.3)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 97242.4 -96055.8 97242.4 -74953.5)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 102237 -101051 97242.4 -96055.8)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -100976 113085 -93372.4)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -106337 105481 -101051 105481 -100976)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 105481 -101051 102237 -101051)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 113085 -93372.4 115767 -93372.4)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 97242.4 -74953.5 98082.6 -74113.3)(net /CHRG_EN)(type route)) + (wire (path In2.Cu 200 115767 -93372.4 116831 -94436.2)(net /CHRG_EN)(type route)) + (wire (path F.Cu 200 135232 -98013.4 135692 -98013.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 120742 -97933.8 121563 -98755.2 125989 -98755.2)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -99823.1 135692 -98013.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 120742 -96773.1 120742 -97933.8)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -98013.4 135692 -97331.1)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 125989 -98755.2 126665 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 135692 -97331.1 140543 -92479.8)(net /CHRG_STAT)(type route)) + (wire (path B.Cu 200 135166 -98079.4 126665 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path B.Cu 200 135232 -98013.4 135166 -98079.4)(net /CHRG_STAT)(type route)) + (wire (path In2.Cu 200 139537 -91474.1 140543 -92479.8)(net /CHRG_STAT)(type route)) + (wire (path In2.Cu 200 132592 -74103.1 139537 -81048.7 139537 -91474.1)(net /CHRG_STAT)(type route)) + (wire (path F.Cu 200 127560 -97466 127934 -97091.7)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 144411 -96559.7 144411 -99547.6)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 127934 -95675.5 127507 -95248.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 139635 -104323 135817 -104323)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 121729 -98353.4 123583 -98353.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 124470 -97466 127560 -97466)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 127934 -97091.7 127934 -95675.5)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 144411 -99547.6 139635 -104323)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 123583 -98353.4 124470 -97466)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 121242 -96773.1 121242 -97865.7 121729 -98353.4)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 142017 -99171.3 141489 -99171.3)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136926 -94894 136925 -94892.8)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 141489 -99171.3 137212 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 144411 -96559.7 144411 -96777.1)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136425 -94894 132213 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136427 -94892.8 136425 -94894)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 144411 -96777.1 142017 -99171.3)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 127673 -95414.5 127507 -95248.4)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 131693 -95414.5 127673 -95414.5)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 132213 -94894 131693 -95414.5)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 136925 -94892.8 136427 -94892.8)(net /CHRG_FAULT)(type route)) + (wire (path B.Cu 200 137212 -94894 136926 -94894)(net /CHRG_FAULT)(type route)) + (wire (path In2.Cu 200 141922 -94070.4 144411 -96559.7)(net /CHRG_FAULT)(type route)) + (wire (path In2.Cu 200 135132 -74103.1 141922 -80893.1 141922 -94070.4)(net /CHRG_FAULT)(type route)) + (wire (path F.Cu 200 177292 -72417.8 139357 -72417.8 137672 -74103.1)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 178367 -68498.1 179164 -69295.8)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 179164 -70545.1 177292 -72417.8)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 179164 -69295.8 179164 -70545.1)(net /BYP_CTRL)(type route)) + (wire (path F.Cu 200 94629.1 -51096.6 86098.1 -51096.6)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86587.8 -53479.2 86587.8 -59102)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 85151.6 -52043.1 86587.8 -53479.2)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 98254.1 -54721.7 94629.1 -51096.6)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86098.1 -51096.6 85151.6 -52043.1)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 98254.1 -60373.1 98254.1 -54721.7)(net Q10_GATE)(type route)) + (wire (path F.Cu 200 86587.8 -59102 84366.6 -61323.1)(net Q10_GATE)(type route)) + (wire (path F.Cu 1000 98856.9 -63725.4 100129 -62453.1)(net 24V)(type route)) + (wire (path F.Cu 1000 164690 -54617.4 164690 -54093.6)(net 24V)(type route)) + (wire (path F.Cu 1000 83264.1 -58490.6 83264.1 -61978.2)(net 24V)(type route)) + (wire (path F.Cu 1000 100129 -62453.1 103953 -66277)(net 24V)(type route)) + (wire (path F.Cu 1000 164690 -54093.6 165151 -53632.3)(net 24V)(type route)) + (wire (path F.Cu 1000 159279 -61953.7 159425 -62100)(net 24V)(type route)) + (wire (path F.Cu 1000 161810 -57497.3 164690 -54617.4)(net 24V)(type route)) + (wire (path F.Cu 1000 159425 -62100 159952 -62626.4)(net 24V)(type route)) + (wire (path F.Cu 1000 155248 -66277 159425 -62100)(net 24V)(type route)) + (wire (path F.Cu 1000 163466 -61759.7 170930 -61759.7)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -52697.7 159942 -57497.3)(net 24V)(type route)) + (wire (path F.Cu 1000 86991.6 -63725.4 98856.9 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 601 166472 -53632.3 166742 -53363.1)(net 24V)(type route)) + (wire (path F.Cu 1000 162600 -62626.4 163466 -61759.7)(net 24V)(type route)) + (wire (path F.Cu 1000 159952 -62626.4 162600 -62626.4)(net 24V)(type route)) + (wire (path F.Cu 601 165151 -53632.3 166472 -53632.3)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -57497.3 159279 -58160.5)(net 24V)(type route)) + (wire (path F.Cu 1000 103953 -66277 155248 -66277)(net 24V)(type route)) + (wire (path F.Cu 1000 161417 -51223.1 159942 -52697.7)(net 24V)(type route)) + (wire (path F.Cu 1000 100129 -62453.1 100129 -61323.1)(net 24V)(type route)) + (wire (path F.Cu 1000 159942 -57497.3 161810 -57497.3)(net 24V)(type route)) + (wire (path F.Cu 1000 170930 -61759.7 173367 -59323.1)(net 24V)(type route)) + (wire (path F.Cu 1000 161417 -47048.1 161417 -51223.1)(net 24V)(type route)) + (wire (path F.Cu 1000 86991.6 -63725.4 86991.6 -71823.1)(net 24V)(type route)) + (wire (path F.Cu 1000 83264.1 -61978.2 85011.4 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 1000 161692 -46773.1 161417 -47048.1)(net 24V)(type route)) + (wire (path F.Cu 1000 85151.6 -56603.1 83264.1 -58490.6)(net 24V)(type route)) + (wire (path F.Cu 1000 159279 -58160.5 159279 -61953.7)(net 24V)(type route)) + (wire (path F.Cu 1000 85011.4 -63725.4 86991.6 -63725.4)(net 24V)(type route)) + (wire (path F.Cu 200 112332 -103113 111542 -102323)(net /PROG)(type route)) + (wire (path F.Cu 200 113902 -103113 112332 -103113)(net /PROG)(type route)) + (wire (path F.Cu 200 114626 -93323.1 113519 -94430.4)(net /PROG)(type route)) + (wire (path F.Cu 200 119792 -93323.1 114626 -93323.1)(net /PROG)(type route)) + (wire (path In2.Cu 200 113519 -102730 113902 -103113)(net /PROG)(type route)) + (wire (path In2.Cu 200 113519 -94430.4 113519 -102730)(net /PROG)(type route)) + (wire (path F.Cu 200 134042 -95323.1 134240 -95521.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134042 -95323.1 134042 -92973.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 123692 -93323.1 129932 -93323.1 130447 -92807.7)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134042 -92973.1 135692 -91323.1)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 134240 -95521.1 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 121742 -97490.4 122003 -97751.7)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 121742 -96773.1 121742 -97490.4)(net /VFB_BST)(type route)) + (wire (path B.Cu 200 122281 -97473.7 133966 -97473.7 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path B.Cu 200 122003 -97751.7 122281 -97473.7)(net /VFB_BST)(type route)) + (wire (path In2.Cu 200 134240 -96600.3 134240 -97200.4)(net /VFB_BST)(type route)) + (wire (path In2.Cu 200 130447 -92807.7 134240 -96600.3)(net /VFB_BST)(type route)) + (wire (path F.Cu 200 122742 -96773.1 122966 -96548.4)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 140795 -91374.8 136676 -95494.5)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 141392 -91374.8 140795 -91374.8)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 122966 -96548.4 123383 -96548.4)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 141392 -90323.1 141392 -91374.8)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 126842 -95850.2 136320 -95850.2)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 123383 -96548.4 126144 -96548.4 126842 -95850.2)(net /F2_SEL)(type route)) + (wire (path B.Cu 200 136320 -95850.2 136676 -95494.5)(net /F2_SEL)(type route)) + (wire (path F.Cu 200 123692 -95823.1 124722 -96853.6 127321 -96853.6)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 139201 -97466.2 141392 -95275.9 141392 -94823.1)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 138136 -97466.2 139201 -97466.2)(net /F1_SEL)(type route)) + (wire (path B.Cu 200 127321 -96853.6 127625 -96549.9 137219 -96549.9 138136 -97466.2)(net /F1_SEL)(type route)) + (wire (path F.Cu 200 127692 -87323.1 127208 -87323.1)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 122742 -91789.7 122742 -91873.1)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 127208 -87323.1 122742 -91789.7)(net /PFO_TP)(type route)) + (wire (path F.Cu 200 166742 -52093.1 165423 -52093.1 161136 -56380.2)(net FREQ_FAN)(type route)) + (wire (path F.Cu 1000 104033 -71164.6 104345 -71164.6)(net IGN_IN)(type route)) + (wire (path F.Cu 1000 102192 -69323.1 104033 -71164.6)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 142355 -97561.4 146430 -97561.4 182692 -133823)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 132607 -87813.1 142355 -97561.4)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 110405 -87813.1 132607 -87813.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104680 -71499.1 104680 -78475.6)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -71164.6 104680 -71499.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104680 -78475.6 104345 -78810.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -81753 110405 -87813.1)(net IGN_IN)(type route)) + (wire (path In2.Cu 1000 104345 -78810.1 104345 -81753)(net IGN_IN)(type route)) + (via "Via[0-3]_600:300_um" 160281 -60946 (net /DIN_4G)(type route)) + (via "Via[0-3]_600:300_um" 163333 -77836.4 (net /DIN_4G)(type route)) + (via "Via[0-3]_600:300_um" 109642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -55773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 101142 -98323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 195147 -110668 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 177917 -45323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 137642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 160694 -59682.2 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 187990 -62946.4 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 130642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -62773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 116642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -83773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -104773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -97773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 109642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 158642 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 102642 -48773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -41773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -55773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 165642 -69773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 95641.6 -111773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 88641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -132773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -90773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 151642 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 154882 -63306.3 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 123642 -76773.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 81641.6 -125773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 144642 -118773 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 100017 -94323.1 (net GND)(type route)) + (via "Via[0-3]_600:300_um" 98158.1 -78069.3 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 97851.6 -82803.1 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 100361 -84328.2 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 120490 -67486.2 (net IGN_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 166684 -63823.1 (net SW_FAN)(type route)) + (via "Via[0-3]_600:300_um" 170313 -55362.6 (net SW_FAN)(type route)) + (via "Via[0-3]_600:300_um" 179603 -49835.2 (net /5V_FAN)(type route)) + (via "Via[0-3]_600:300_um" 190531 -50051.9 (net /5V_FAN)(type route)) + (via "Via[0-3]_600:300_um" 108674 -96377.2 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 154715 -93359.8 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 102590 -100216 (net /FAN_RET)(type route)) + (via "Via[0-3]_600:300_um" 173407 -53346.3 (net /EN_FAN)(type route)) + (via "Via[0-3]_600:300_um" 174361 -60216.8 (net /EN_FAN)(type route)) + (via "Via[0-3]_800:400_um" 119382 -89423.1 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_800:400_um" 126822 -89223.1 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 93354.2 -109585 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 116832 -109478 (net /BAT_PLUS)(type route)) + (via "Via[0-3]_600:300_um" 125532 -94123.1 (net /NTC)(type route)) + (via "Via[0-3]_600:300_um" 115743 -105396 (net /NTC)(type route)) + (via "Via[0-3]_600:300_um" 124193 -57474.8 (net /NRST)(type route)) + (via "Via[0-3]_600:300_um" 188692 -107616 (net /SW3_NODE)(type route)) + (via "Via[0-3]_600:300_um" 187097 -116027 (net /SW3_NODE)(type route)) + (via "Via[0-3]_600:300_um" 171760 -97690.9 (net /SW_5V)(type route)) + (via "Via[0-3]_800:400_um" 202152 -113193 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 171617 -113477 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 156118 -63406.1 (net /SW_5V)(type route)) + (via "Via[0-3]_600:300_um" 188670 -102323 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 196891 -110544 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 181474 -109498 (net /FB3)(type route)) + (via "Via[0-3]_600:300_um" 187142 -107718 (net /BST3)(type route)) + (via "Via[0-3]_600:300_um" 192976 -114752 (net /BST3)(type route)) + (via "Via[0-3]_600:300_um" 92198.6 -67700.9 (net /BAT_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 92096.6 -109080 (net /BAT_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 161642 -61571.2 (net /PWR_CTRL)(type route)) + (via "Via[0-3]_600:300_um" 94238.2 -70412.6 (net /5V_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 106832 -111583 (net /5V_SENSE)(type route)) + (via "Via[0-3]_600:300_um" 164399 -108749 (net /NTC_TEMP)(type route)) + (via "Via[0-3]_600:300_um" 169737 -114087 (net /NTC_TEMP)(type route)) + (via "Via[0-3]_600:300_um" 185252 -114635 (net /COMP3_C)(type route)) + (via "Via[0-3]_600:300_um" 185103 -116791 (net /COMP3_C)(type route)) + (via "Via[0-3]_600:300_um" 125649 -91964.4 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 118024 -91808.1 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 101516 -77180.1 (net /MAIN5V)(type route)) + (via "Via[0-3]_600:300_um" 96481.1 -72166.6 (net FAN_PWM)(type route)) + (via "Via[0-3]_600:300_um" 93366.6 -93338.1 (net FAN_PWM)(type route)) + (via "Via[0-3]_600:300_um" 99480.8 -93353.8 (net FAN_GATE)(type route)) + (via "Via[0-3]_600:300_um" 102921 -95462.2 (net FAN_GATE)(type route)) + (via "Via[0-3]_600:300_um" 125152 -94993.1 (net /IGATE)(type route)) + (via "Via[0-3]_600:300_um" 113057 -91373.7 (net /IGATE)(type route)) + (via "Via[0-3]_600:300_um" 126615 -111715 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 101976 -75485.3 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 127666 -92441.5 (net /I2C_SDA)(type route)) + (via "Via[0-3]_600:300_um" 126634 -113349 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 114758 -48379.8 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 129603 -92460 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 137323 -88991.5 (net /I2C_SCL)(type route)) + (via "Via[0-3]_600:300_um" 176067 -104039 (net /3V3_MODEM)(type route)) + (via "Via[0-3]_600:300_um" 117952 -94803.1 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 124692 -94303.1 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 166798 -79030.3 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 102876 -80722.8 (net /VEH5V)(type route)) + (via "Via[0-3]_600:300_um" 177369 -107426 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 101070 -115090 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 99789.9 -107426 (net /LED_A)(type route)) + (via "Via[0-3]_600:300_um" 166040 -75929.3 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 128569 -92441.5 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 110777 -111539 (net USART1_RX)(type route)) + (via "Via[0-3]_600:300_um" 134492 -98820 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 94149.1 -84401.6 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 99126.1 -102323 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 133430 -103586 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 153057 -96999.8 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 132142 -111318 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 94584.4 -46323.1 (net 3V3)(type route)) + (via "Via[0-3]_600:300_um" 91070.6 -62038.4 (net /24V_IN)(type route)) + (via "Via[0-3]_600:300_um" 164501 -60325.1 (net /BASE_LS)(type route)) + (via "Via[0-3]_600:300_um" 155563 -61161.3 (net /BASE_LS)(type route)) + (via "Via[0-3]_600:300_um" 177545 -46302.1 (net /FB_FAN)(type route)) + (via "Via[0-3]_600:300_um" 173372 -49792.7 (net /FB_FAN)(type route)) + (via "Via[0-3]_600:300_um" 99473.4 -103451 (net FAN_TACH_RAW)(type route)) + (via "Via[0-3]_600:300_um" 175684 -98459.4 (net FAN_TACH_RAW)(type route)) + (via "Via[0-3]_600:300_um" 147661 -69044 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 96632.6 -78671.1 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 98373.9 -101217 (net FAN_TACH)(type route)) + (via "Via[0-3]_600:300_um" 168395 -46076.2 (net BST_FAN)(type route)) + (via "Via[0-3]_600:300_um" 166742 -55441.5 (net BST_FAN)(type route)) + (via "Via[0-3]_600:300_um" 163792 -91863.1 (net /SW_BAT)(type route)) + (via "Via[0-3]_600:300_um" 131319 -83542.7 (net /SW_BAT)(type route)) + (via "Via[0-3]_600:300_um" 166527 -75260.4 (net /BATLED3)(type route)) + (via "Via[0-3]_600:300_um" 200007 -48492.5 (net /BATLED3)(type route)) + (via "Via[0-3]_600:300_um" 114647 -94202.2 (net /CLPROG_TP)(type route)) + (via "Via[0-3]_600:300_um" 113192 -106044 (net /CLPROG_TP)(type route)) + (via "Via[0-3]_600:300_um" 169831 -65597.5 (net /BATLED4)(type route)) + (via "Via[0-3]_600:300_um" 183645 -51599.1 (net /BATLED4)(type route)) + (via "Via[0-3]_600:300_um" 92929.4 -68611.8 (net EXT_LED)(type route)) + (via "Via[0-3]_600:300_um" 91096.8 -104060 (net EXT_LED)(type route)) + (via "Via[0-3]_600:300_um" 141743 -98569.5 (net /F0_SEL)(type route)) + (via "Via[0-3]_600:300_um" 124832 -95933.1 (net /F0_SEL)(type route)) + (via "Via[0-3]_600:300_um" 173947 -108033 (net /LED_K)(type route)) + (via "Via[0-3]_600:300_um" 110969 -113108 (net /LED_K)(type route)) + (via "Via[0-3]_600:300_um" 196018 -48827.7 (net /BATLED2)(type route)) + (via "Via[0-3]_600:300_um" 181693 -60961.4 (net /BATLED2)(type route)) + (via "Via[0-3]_600:300_um" 153093 -64469.4 (net /SW_IN)(type route)) + (via "Via[0-3]_600:300_um" 152217 -51550.5 (net /SW_IN)(type route)) + (via "Via[0-3]_600:300_um" 124054 -91327.7 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 103328 -84222.5 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 106504 -97236.3 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 107654 -82308.9 (net /PFI)(type route)) + (via "Via[0-3]_600:300_um" 189563 -50997.4 (net /BATLED1)(type route)) + (via "Via[0-3]_600:300_um" 164176 -64973.5 (net /BATLED1)(type route)) + (via "Via[0-3]_600:300_um" 98082.6 -74113.3 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 116831 -94436.2 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 105481 -106337 (net /CHRG_EN)(type route)) + (via "Via[0-3]_600:300_um" 135232 -98013.4 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 126665 -98079.4 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 140543 -92479.8 (net /CHRG_STAT)(type route)) + (via "Via[0-3]_600:300_um" 144411 -96559.7 (net /CHRG_FAULT)(type route)) + (via "Via[0-3]_600:300_um" 127507 -95248.4 (net /CHRG_FAULT)(type route)) + (via "Via[0-3]_600:300_um" 113902 -103113 (net /PROG)(type route)) + (via "Via[0-3]_600:300_um" 113519 -94430.4 (net /PROG)(type route)) + (via "Via[0-3]_600:300_um" 134240 -97200.4 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 130447 -92807.7 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 122003 -97751.7 (net /VFB_BST)(type route)) + (via "Via[0-3]_600:300_um" 123383 -96548.4 (net /F2_SEL)(type route)) + (via "Via[0-3]_600:300_um" 136676 -95494.5 (net /F2_SEL)(type route)) + (via "Via[0-3]_600:300_um" 138136 -97466.2 (net /F1_SEL)(type route)) + (via "Via[0-3]_600:300_um" 127321 -96853.6 (net /F1_SEL)(type route)) + (via "Via[0-3]_600:300_um" 104345 -71164.6 (net IGN_IN)(type route)) ) ) diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_dru b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_dru new file mode 100644 index 0000000..96403a9 --- /dev/null +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_dru @@ -0,0 +1,4 @@ +(version 1) +(rule "Minimum clearance 1" + (constraint clearance (min 0.15mm)) +) diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pcb b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pcb index 54a3720..111eae3 100644 --- a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pcb +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pcb @@ -8,10 +8,10 @@ ) (paper "A4") (title_block - (title "EINARBORD HBOX 1.0 ") + (title "EINARBoard HBOX 1.0") (date "2026-06-23") (rev "1.0") - (company "Helgen Servicios Especialzados") + (company "Helgen Servicios Especializados") (comment 1 "Last Review: Dr. Leopoldo Rodriguez Salazar") ) (layers @@ -135,7 +135,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -158,6 +158,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/60202028-1109-4cbc-8c85-5ee7f203e0fd") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -218,7 +228,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "GATE_LS") + (net "/GATE_LS") + (pintype "passive") (uuid "18b638b7-de38-44b4-bb2a-432635ad4240") ) (pad "2" smd roundrect @@ -226,7 +237,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SYS5V") + (net "/SYS5V") + (pintype "passive") (uuid "09c324d4-6c7b-4f85-97a5-a1950a29ac0a") ) (embedded_fonts no) @@ -259,7 +271,7 @@ ) ) ) - (property "Value" "MODO-B-UPLINK" + (property "Value" "MODO-B-UPLINK (DNP — harness alt)" (at 2.5 4.6 0) (layer "F.Fab") (uuid "43a784b8-ef6f-44c6-a78e-7d187cdd9c35") @@ -270,7 +282,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -304,6 +316,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/5cc94dd5-898c-4556-9977-76a379c3664c") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -491,6 +513,8 @@ (remove_unused_layers no) (roundrect_rratio 0.147059) (net "USART1_RX") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "ca0c2d0f-d526-4847-922d-3d32122d2c5a") ) (pad "2" thru_hole oval @@ -499,7 +523,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "DIN_4G") + (net "/DIN_4G") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "f6ba96e6-69e1-451e-83bb-b037875d25b6") ) (pad "3" thru_hole oval @@ -509,6 +535,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "65d04499-5642-4ecc-aa88-5f2f5bd24494") ) (embedded_fonts no) @@ -975,7 +1003,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 270) (layer "F.Fab") (hide yes) @@ -998,6 +1026,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/13db1034-2695-4354-8bff-fa449b25171e") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -1184,7 +1222,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "5V_FAN") + (net "/5V_FAN") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "866348ef-1349-4724-97d7-41465b933fcd") ) (pad "2" thru_hole oval @@ -1193,7 +1233,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "FAN_RET") + (net "/FAN_RET") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "28fdbe6f-ea62-4e14-a3b6-a0f833bd6c3c") ) (pad "3" thru_hole oval @@ -1203,6 +1245,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "a5777320-cc1a-47b7-8e1f-7738ea9aebc1") ) (pad "4" thru_hole oval @@ -1212,6 +1256,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "FAN_TACH_RAW") + (pinfunction "Pin_4_4") + (pintype "passive") (uuid "f83b0ee1-5aea-454c-b8a2-9f56bee17964") ) (embedded_fonts no) @@ -1255,7 +1301,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -1289,6 +1335,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/7e93d10d-ed9d-4790-bfa7-54e73595efdc") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -1349,7 +1405,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "EN_FAN") + (net "/EN_FAN") + (pintype "passive") (uuid "50c2c96c-04d2-4601-b7d0-a87532b29edc") ) (pad "2" smd roundrect @@ -1358,6 +1415,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "c56588c4-4905-4342-8788-374e9b97d54e") ) (embedded_fonts no) @@ -1401,7 +1459,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -1435,6 +1493,16 @@ ) ) ) + (property ki_fp_filters "LED* LED_SMD:* LED_THT:*") + (path "/36a3bee1-3a58-44f9-b6ff-a552d8955561") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -1545,6 +1613,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "K_1") + (pintype "passive") (uuid "d6ea227a-b31c-4cea-a97f-74bf1147c301") ) (pad "2" smd roundrect @@ -1552,7 +1622,9 @@ (size 0.975 1.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED2") + (net "/BLED2") + (pinfunction "A_2") + (pintype "passive") (uuid "01927e10-c4fe-4701-8806-79daf128c5f4") ) (embedded_fonts no) @@ -1596,7 +1668,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -1630,6 +1702,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/af9f65f9-fd8c-4aaf-be3f-e1bf8e4bbc26") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -1816,7 +1898,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "BAT_PLUS") + (net "/BAT_PLUS") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "58c2a876-a82e-481a-92c8-3e1eba71a1e2") ) (pad "2" thru_hole oval @@ -1826,6 +1910,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "3a674d0a-7968-4216-a824-10369fb13961") ) (pad "3" thru_hole oval @@ -1834,7 +1920,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "NTC") + (net "/NTC") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "c8fe5fbf-19c5-4c73-a4bb-d42d406a2a97") ) (embedded_fonts no) @@ -1878,7 +1966,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 270) (layer "F.Fab") (hide yes) @@ -1912,6 +2000,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/672d7489-ac29-41f0-b29c-26f631f47415") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -2098,7 +2196,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "NRST") + (net "/NRST") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "bd8e04de-1a80-41a4-881d-da5dd48ab60e") ) (pad "2" thru_hole oval @@ -2108,6 +2208,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "75b1a1a0-91f3-48fa-acf8-e8e1c922b61f") ) (embedded_fonts no) @@ -2297,7 +2399,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 180) (layer "F.Fab") (hide yes) @@ -2331,6 +2433,15 @@ ) ) ) + (path "/56a2435b-289b-44c2-83c2-1a9fc67e871c") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "7" "2" "6" "4" "3" "5" "8" "1") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -2581,7 +2692,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW3_NODE") + (net "/SW3_NODE") + (pinfunction "SW_1") + (pintype "passive") (uuid "1315d420-69d3-4040-b2d8-ce0e401073c3") ) (pad "2" smd roundrect @@ -2589,7 +2702,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_5V") + (net "/SW_5V") + (pinfunction "EN_2") + (pintype "passive") (uuid "b32e63de-3807-4b2d-b702-519e343f84b9") ) (pad "3" smd roundrect @@ -2597,7 +2712,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "COMP3") + (net "/COMP3") + (pinfunction "COMP_3") + (pintype "passive") (uuid "c58c0fe1-6984-4655-8bad-09d89697a57c") ) (pad "4" smd roundrect @@ -2605,7 +2722,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FB3") + (net "/FB3") + (pinfunction "FB_4") + (pintype "passive") (uuid "c3dd3ddd-ade8-4a5a-a19a-d9c2ec2c5cbe") ) (pad "5" smd roundrect @@ -2614,6 +2733,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "GND_5") + (pintype "power_in") (uuid "8a1a7cee-2077-4f5f-b3fb-1391533986f3") ) (pad "6" smd roundrect @@ -2621,7 +2742,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FREQ3") + (net "/FREQ3") + (pinfunction "FREQ_6") + (pintype "passive") (uuid "2cf6563c-7c0b-4785-a26c-7ee321ef5b0b") ) (pad "7" smd roundrect @@ -2629,7 +2752,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_5V") + (net "/SW_5V") + (pinfunction "VIN_7") + (pintype "power_in") (uuid "b2ac1243-e7e4-48e9-aecb-e7ced59f5de6") ) (pad "8" smd roundrect @@ -2637,7 +2762,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BST3") + (net "/BST3") + (pinfunction "BST_8") + (pintype "passive") (uuid "e9bd006f-0ddc-4cc1-8e5e-ab8fd2a13af7") ) (pad "9" smd rect @@ -2690,7 +2817,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -2724,6 +2851,16 @@ ) ) ) + (property ki_fp_filters "LED* LED_SMD:* LED_THT:*") + (path "/075694af-1550-45ec-bd39-b01d921a3e89") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -2834,6 +2971,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "K_1") + (pintype "passive") (uuid "f7f44501-765b-461b-9b3c-0f67b50b6cb5") ) (pad "2" smd roundrect @@ -2841,7 +2980,9 @@ (size 0.975 1.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED1") + (net "/BLED1") + (pinfunction "A_2") + (pintype "passive") (uuid "810721d9-8d92-4b73-8a99-895ef19560b0") ) (embedded_fonts no) @@ -2896,7 +3037,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -2919,6 +3060,18 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/d8e3c98e-06a5-4587-afa4-e50d91724aab") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" + "16" "17" "18" "19" "20" + ) + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -3089,6 +3242,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J1-Pin_1-Pad1)") + (pinfunction "Pin_1_1") + (pintype "passive+no_connect") (uuid "3b4a0511-47a4-442b-b6e7-9d68a19fd2e0") ) (pad "2" thru_hole circle @@ -3098,6 +3253,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J1-Pin_2-Pad2)") + (pinfunction "Pin_2_2") + (pintype "passive+no_connect") (uuid "f32515af-377b-43af-9f92-73b1c25c04c4") ) (pad "3" thru_hole circle @@ -3107,6 +3264,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J1-Pin_3-Pad3)") + (pinfunction "Pin_3_3") + (pintype "passive+no_connect") (uuid "8bbd9b89-01c7-44d0-95aa-f437d72a676b") ) (pad "4" thru_hole circle @@ -3116,6 +3275,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J1-Pin_4-Pad4)") + (pinfunction "Pin_4_4") + (pintype "passive+no_connect") (uuid "1dee294e-d1f0-4c0e-ab5f-9eec0ffe7130") ) (pad "5" thru_hole circle @@ -3124,7 +3285,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "NRST") + (net "/NRST") + (pinfunction "Pin_5_5") + (pintype "passive") (uuid "f664ee59-bb88-4db0-a820-64c540b441ea") ) (pad "6" thru_hole circle @@ -3133,7 +3296,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "BAT_SENSE") + (net "/BAT_SENSE") + (pinfunction "Pin_6_6") + (pintype "passive") (uuid "a7cd96f6-3a3f-4c91-b3c8-0a11e3b00e28") ) (pad "7" thru_hole circle @@ -3142,7 +3307,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "PWR_CTRL") + (net "/PWR_CTRL") + (pinfunction "Pin_7_7") + (pintype "passive") (uuid "c56db8b8-c992-4921-aa5d-391764ea0579") ) (pad "8" thru_hole circle @@ -3151,7 +3318,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "GNSS_TX") + (net "/GNSS_TX") + (pinfunction "Pin_8_8") + (pintype "passive") (uuid "876d2a15-df16-4f80-ba62-ff731a91be3b") ) (pad "9" thru_hole circle @@ -3160,7 +3329,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "GNSS_RX") + (net "/GNSS_RX") + (pinfunction "Pin_9_9") + (pintype "passive") (uuid "6ab2dca3-e24a-48f7-ac45-350aa75626c1") ) (pad "10" thru_hole circle @@ -3169,7 +3340,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "5V_SENSE") + (net "/5V_SENSE") + (pinfunction "Pin_10_10") + (pintype "passive") (uuid "106da1b3-6647-4873-97ce-92ae0dad96bd") ) (pad "11" thru_hole circle @@ -3179,6 +3352,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "IGN_SENSE") + (pinfunction "Pin_11_11") + (pintype "passive") (uuid "da839237-8d3f-4172-a1d5-ab41eb9a6c4f") ) (pad "12" thru_hole circle @@ -3188,6 +3363,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "FAN_PWM") + (pinfunction "Pin_12_12") + (pintype "passive") (uuid "494b5a37-df00-47a9-9fe9-a41311537472") ) (pad "13" thru_hole circle @@ -3197,6 +3374,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J1-Pin_13-Pad13)") + (pinfunction "Pin_13_13") + (pintype "passive+no_connect") (uuid "eb2a3311-7949-4a9f-b765-0fdeaba6a949") ) (pad "14" thru_hole circle @@ -3206,6 +3385,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "EXT_LED") + (pinfunction "Pin_14_14") + (pintype "passive") (uuid "192d9cc0-3aba-48de-8200-4bc995aeeff7") ) (pad "15" thru_hole circle @@ -3214,7 +3395,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "NTC_TEMP") + (net "/NTC_TEMP") + (pinfunction "Pin_15_15") + (pintype "passive") (uuid "778c69b4-2de7-4d83-a282-93de0c021f77") ) (pad "16" thru_hole circle @@ -3224,6 +3407,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J1-Pin_16-Pad16)") + (pinfunction "Pin_16_16") + (pintype "passive+no_connect") (uuid "935127c1-052b-4b48-aca1-5618a0a1d48f") ) (pad "17" thru_hole circle @@ -3233,6 +3418,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "FAN_TACH") + (pinfunction "Pin_17_17") + (pintype "passive") (uuid "900b754a-6fdb-4acf-9cb6-3fe30ecb38d5") ) (pad "18" thru_hole circle @@ -3242,6 +3429,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "3V3") + (pinfunction "Pin_18_18") + (pintype "passive") (uuid "4cdee605-4081-4742-9042-9e58faef2ddc") ) (pad "19" thru_hole circle @@ -3251,6 +3440,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_19_19") + (pintype "passive") (uuid "b3e80d51-78ef-4729-a459-046a384abcde") ) (pad "20" thru_hole circle @@ -3259,7 +3450,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "SYS5V") + (net "/SYS5V") + (pinfunction "Pin_20_20") + (pintype "passive") (uuid "3bccfd0b-b1e8-48a2-8dcb-d4af06c62537") ) (embedded_fonts no) @@ -3303,7 +3496,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -3337,6 +3530,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/27e8f6d1-b547-43cf-8394-0eab30919dea") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -3397,7 +3600,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "COMP3_C") + (net "/COMP3_C") + (pintype "passive") (uuid "bf33dee4-deff-4da0-b088-4188b2e88b06") ) (pad "2" smd roundrect @@ -3406,6 +3610,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "1713a1b7-cc10-4f17-9524-e0c0773e2659") ) (embedded_fonts no) @@ -3460,7 +3665,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -3483,6 +3688,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/6febc877-d113-4b7a-b5c0-82fa36190d9a") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -3543,7 +3758,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BAT_PLUS") + (net "/BAT_PLUS") + (pintype "passive") (uuid "a730651f-ea44-47b2-9a96-9ec2c74b0316") ) (pad "2" smd roundrect @@ -3551,7 +3767,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BAT_SENSE") + (net "/BAT_SENSE") + (pintype "passive") (uuid "996a6f18-2287-465c-ac6a-4474363b74ae") ) (embedded_fonts no) @@ -3595,7 +3812,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -3629,6 +3846,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/02b1c28b-6581-4f24-a2d8-388a336ccaa8") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -3815,7 +4042,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "f61946ef-0d67-4342-a89f-907cbd9b5431") ) (pad "2" thru_hole oval @@ -3824,7 +4053,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "SYS5V") + (net "/SYS5V") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "b2d05c1b-2bb1-431e-9d2e-c10e0ae6a089") ) (embedded_fonts no) @@ -3843,13 +4074,13 @@ (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (uuid "293debb6-27f9-40db-aae9-7b48d6b4c93f") - (at 154.25415 64.3231) + (at 138.65 60.9) (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)") (tags "SOT TO_SOT_SMD") (property "Reference" "Q1" - (at 0 -2.4 0) + (at 0.1 2.45 0) (layer "F.SilkS") - (uuid "2cbd599c-bce5-4efa-93ec-00b0f3d14ac4") + (uuid "a4d321da-2509-44d2-b722-7cebaf32a477") (effects (font (size 1 1) @@ -3860,7 +4091,7 @@ (property "Value" "AO3401A" (at 0 2.4 0) (layer "F.Fab") - (uuid "fe97685e-561a-47bb-a9b7-76774cfd7c3e") + (uuid "e3e68c7d-9349-4ea2-b605-51748798260b") (effects (font (size 1 1) @@ -3872,18 +4103,18 @@ (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "ef51273d-0b40-438a-a17a-a4d50703be18") + (uuid "765d0c84-8d23-4c6b-b21b-c8c1c02e6fbd") (effects (font (size 1.27 1.27) ) ) ) - (property "Description" "" + (property "Description" "P-MOSFET transistor" (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "367d5a4e-d6d2-4e4c-bbb2-da3006893296") + (uuid "4540d84d-3afe-4f6a-95a8-46bf6f6d89db") (effects (font (size 1.27 1.27) @@ -3902,6 +4133,15 @@ ) ) ) + (path "/8d92151e-fb60-4bcd-9974-3c10c7817d60") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "G" "D" "S") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -4174,7 +4414,7 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "GATE_LS") + (net "/GATE_LS") (uuid "dc13d121-0ba4-436f-bc46-f80300a84202") ) (pad "2" smd roundrect @@ -4182,7 +4422,7 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_IN") + (net "/SW_IN") (uuid "13780442-9f8b-4765-bbbb-91f5575e98cd") ) (pad "3" smd roundrect @@ -4190,7 +4430,7 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_5V") + (net "/SW_5V") (uuid "ebb6b2bf-e7f3-4336-8491-9bf9d6467131") ) (embedded_fonts no) @@ -4213,7 +4453,7 @@ (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "resistor") (property "Reference" "Rg" - (at 0 -1.43 0) + (at -2.49165 -0.0231 90) (layer "F.SilkS") (uuid "2ce672f0-b77e-42aa-b7a0-762b92960288") (effects @@ -4380,7 +4620,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -4414,6 +4654,15 @@ ) ) ) + (path "/c071eb4d-93f8-4af8-8260-596cec32cb2d") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "4" "5" "1" "6" "2" "7" "3" "8") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -4636,7 +4885,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "S_1") + (pintype "passive") (uuid "fcf4f644-ebe6-495f-bef9-5c4177425e8c") ) (pad "2" smd roundrect @@ -4644,7 +4895,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "S_2") + (pintype "passive") (uuid "9e60654c-0b87-46c3-b9e3-650cb0916ca0") ) (pad "3" smd roundrect @@ -4652,7 +4905,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "S_3") + (pintype "passive") (uuid "d4c2c34e-9f2f-47cd-a668-fcf0a1b8bc89") ) (pad "4" smd roundrect @@ -4660,7 +4915,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "IGATE") + (net "/IGATE") + (pinfunction "G_4") + (pintype "input") (uuid "6132515e-ce2e-45ba-8807-d3474077c1f5") ) (pad "5" smd roundrect @@ -4668,7 +4925,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VIN_SW") + (net "/VIN_SW") + (pinfunction "D_5") + (pintype "passive") (uuid "b73e96c8-7acf-47cd-9457-8ed6751e69e7") ) (pad "6" smd roundrect @@ -4676,7 +4935,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VIN_SW") + (net "/VIN_SW") + (pinfunction "D_6") + (pintype "passive") (uuid "c4281e1f-45ef-415e-b31f-ba3f16b1b949") ) (pad "7" smd roundrect @@ -4684,7 +4945,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VIN_SW") + (net "/VIN_SW") + (pinfunction "D_7") + (pintype "passive") (uuid "ee738b61-367d-4b91-a48a-4e83a3a3c456") ) (pad "8" smd roundrect @@ -4692,7 +4955,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VIN_SW") + (net "/VIN_SW") + (pinfunction "D_8") + (pintype "passive") (uuid "5250460a-f991-41bc-854d-ff2a70ce6a39") ) (embedded_fonts no) @@ -4736,7 +5001,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -4770,6 +5035,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/aa9fbdec-d78c-47ae-bc9f-e7e1c0aa9aee") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -4830,7 +5105,8 @@ (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pintype "passive") (uuid "0e1757de-dbe7-42e1-acf5-6474773a570e") ) (pad "2" smd roundrect @@ -4839,6 +5115,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "dbdbf51b-8008-4eaf-a3f0-77c86d9b1347") ) (embedded_fonts no) @@ -4893,7 +5170,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -4916,6 +5193,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/485654eb-2218-4de8-bd8a-daab7c03e4d7") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -4977,6 +5264,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "74bcea7f-e07d-4aec-8cdc-04a323a6a7d7") ) (pad "2" smd roundrect @@ -4984,7 +5272,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "I2C_SDA") + (net "/I2C_SDA") + (pintype "passive") (uuid "8d0d419b-ec2e-43a2-9c1a-27880440335a") ) (embedded_fonts no) @@ -5028,7 +5317,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -5062,6 +5351,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/bc56c4f5-e836-4e4c-9693-00d8e16c3068") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -5122,7 +5421,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FREQ3") + (net "/FREQ3") + (pintype "passive") (uuid "948315fc-8890-4e23-83c2-7f5ddf91011d") ) (pad "2" smd roundrect @@ -5131,6 +5431,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "d950fc75-a89d-4f24-9480-effb2e89e6c5") ) (embedded_fonts no) @@ -5146,6 +5447,163 @@ ) ) ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "40541657-de89-4059-8e3d-a569a7b11daf") + (at 203.05 84.45) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") + (tags "resistor") + (property "Reference" "Rmled" + (at 0 -1.43 0) + (layer "F.SilkS") + (uuid "ef063388-3be2-44c8-a0fc-39197fa9a45e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "1k" + (at 0 1.43 0) + (layer "F.Fab") + (uuid "1d33e3b9-c721-4f89-9810-468efd5aedf6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d887c1ff-5806-43e8-aba0-d537e5936a94") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "b72178f9-0cf1-457c-b14e-8467b569cc1b") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "KiLib_Generator" "SMD_2terminal_chip_molded" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "98cbc959-3bc2-430f-93bf-e093eed6ffaf") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property ki_fp_filters "R_*") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "3229acc7-76ce-4ba2-9c7d-c449c3186d44") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b3eefa09-7644-4c50-a144-d83b7ef14dcc") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "3351d338-5cca-4056-bd38-70e4f96da19a") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "00153aec-fc03-4647-8391-76bff85031e1") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "64d86302-5fea-455b-9468-4e0823bd1983") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/MODEM_LED") + (pintype "passive") + (uuid "341faec7-e04b-48d2-ad43-5737492db5a4") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/MODEM_LED_A") + (pintype "passive") + (uuid "a88e7022-2d5d-4882-a6f7-bf38365c1bb6") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" (layer "F.Cu") (uuid "4098710d-42b0-4e89-a130-d10b7bb9dd75") @@ -5153,7 +5611,7 @@ (descr "Sensirion, SHT40, SHT41, SHT45, DFN, 4 Pin (https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf)") (tags "DFN NoLead") (property "Reference" "U3" - (at 0 -1.7 0) + (at 0.00835 1.8269 0) (layer "F.SilkS") (uuid "5590ba3d-46ef-402d-b6b0-757b8ebf6259") (effects @@ -5174,7 +5632,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -5187,7 +5645,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -5200,6 +5658,16 @@ ) ) ) + (property ki_fp_filters "Sensirion?DFN*1.5x1.5mm*P0.8mm*SHT4x*") + (path "/30ea07c3-9fe8-4631-8864-9f26d2cc3400") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "2" "1" "3" "4") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -5339,14 +5807,18 @@ (at -0.7 -0.4) (size 0.5 0.3) (layers "F.Cu" "F.Mask" "F.Paste") - (net "I2C_SDA") + (net "/I2C_SDA") + (pinfunction "SDA_1") + (pintype "bidirectional") (uuid "05535bb1-7a19-4e16-ad7d-42e79cf9d3f9") ) (pad "2" smd rect (at -0.7 0.4) (size 0.5 0.3) (layers "F.Cu" "F.Mask" "F.Paste") - (net "I2C_SCL") + (net "/I2C_SCL") + (pinfunction "SCL_2") + (pintype "input") (uuid "f40b471c-b7a6-4c42-875e-1c0b41e6e578") ) (pad "3" smd rect @@ -5354,6 +5826,8 @@ (size 0.5 0.3) (layers "F.Cu" "F.Mask" "F.Paste") (net "3V3") + (pinfunction "VDD_3") + (pintype "power_in") (uuid "32ac7b58-5a0d-45c0-995a-a9c71280002d") ) (pad "4" smd rect @@ -5361,6 +5835,8 @@ (size 0.5 0.3) (layers "F.Cu" "F.Mask" "F.Paste") (net "GND") + (pinfunction "VSS_4") + (pintype "power_in") (uuid "b674efca-cc2a-40bd-98b8-613d65609e05") ) (zone @@ -5438,7 +5914,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 270) (layer "F.Fab") (hide yes) @@ -5472,6 +5948,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/ac11ec55-d953-404b-a692-ee5071dea8a9") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -5532,7 +6018,8 @@ (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_5V") + (net "/SW_5V") + (pintype "passive") (uuid "8faa588e-9db5-4244-aa8d-1036129e7db5") ) (pad "2" smd roundrect @@ -5541,6 +6028,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "cbb76d04-edeb-4d49-9973-a95dfaf65c05") ) (embedded_fonts no) @@ -5584,7 +6072,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -5618,6 +6106,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/8d4c9880-1dd8-4900-9131-09e1665b1db7") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4" "5" "6" "7" "8" "9" "10") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -5787,7 +6285,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "3V3_MODEM") + (net "/3V3_MODEM") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "398c54c4-d969-4f94-871c-dc7585537310") ) (pad "2" thru_hole circle @@ -5796,7 +6296,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "DOUT_4G") + (net "/DOUT_4G") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "05ef352c-0cee-47de-b5aa-c0a32c0b33c4") ) (pad "3" thru_hole circle @@ -5805,7 +6307,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "DIN_4G") + (net "/DIN_4G") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "b7943271-cf26-42e2-ac3b-08d8ac2d9745") ) (pad "4" thru_hole circle @@ -5814,7 +6318,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J7-Pin_4-Pad4)") + (net "GND") + (pinfunction "Pin_4_4") + (pintype "passive") (uuid "1cafce77-5e4f-4516-9db8-575d70893a5d") ) (pad "5" thru_hole circle @@ -5823,7 +6329,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J7-Pin_5-Pad5)") + (net "/MODEM_RST") + (pinfunction "Pin_5_5") + (pintype "passive") (uuid "fdf26558-991e-4d9f-b196-1d2d8b0f015b") ) (pad "6" thru_hole circle @@ -5832,7 +6340,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J7-Pin_6-Pad6)") + (net "/USB_VBUS") + (pinfunction "Pin_6_6") + (pintype "passive") (uuid "dfb516ad-8f35-4878-bd43-cdfd2a726aa2") ) (pad "7" thru_hole circle @@ -5841,7 +6351,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J7-Pin_7-Pad7)") + (net "/USB_DP") + (pinfunction "Pin_7_7") + (pintype "passive") (uuid "ae3aa518-3fe9-47b1-ac08-264dcbfc6e0b") ) (pad "8" thru_hole circle @@ -5850,7 +6362,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J7-Pin_8-Pad8)") + (net "/USB_DM") + (pinfunction "Pin_8_8") + (pintype "passive") (uuid "e988fa03-ad53-488a-ae0c-dc46af9b3055") ) (pad "9" thru_hole circle @@ -5860,6 +6374,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J7-Pin_9-Pad9)") + (pinfunction "Pin_9_9") + (pintype "passive+no_connect") (uuid "5171135d-be6e-46f3-a795-10c6a1ec0a6c") ) (pad "10" thru_hole circle @@ -5869,6 +6385,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_10_10") + (pintype "passive") (uuid "e628fc30-d450-4e6b-b231-1a4d110e5d6c") ) (embedded_fonts no) @@ -5891,7 +6409,7 @@ (descr "Diode SMA (DO-214AC)") (tags "Diode SMA (DO-214AC)") (property "Reference" "D2" - (at 0 -2.5 0) + (at -4.64165 -0.1231 0) (layer "F.SilkS") (uuid "531964ff-67df-406f-9eed-effb3da482e0") (effects @@ -5925,7 +6443,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Schottky diode" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -5938,6 +6456,16 @@ ) ) ) + (property ki_fp_filters "TO-???* *_Diode_* *SingleDiode* D_*") + (path "/1446dacc-e01f-4b8c-8452-53846218445b") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -6126,7 +6654,9 @@ (size 2.5 1.8) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.1388888889) - (net "5V_FAN") + (net "/5V_FAN") + (pinfunction "K_1") + (pintype "passive") (uuid "59cbf1c0-bbfe-4314-b87e-10338a58281e") ) (pad "2" smd roundrect @@ -6134,7 +6664,9 @@ (size 2.5 1.8) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.1388888889) - (net "FAN_RET") + (net "/FAN_RET") + (pinfunction "A_2") + (pintype "passive") (uuid "2feca86a-c92a-4b0e-9ac0-bbe230d67dd4") ) (embedded_fonts no) @@ -6178,7 +6710,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -6212,6 +6744,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/e0246099-52be-43fe-9a8e-614e2d10715f") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -6272,7 +6814,8 @@ (size 1.125 1.75) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.222222) - (net "VEH5V") + (net "/VEH5V") + (pintype "passive") (uuid "68b28b8f-ebc3-4afe-b077-3bb5f6e04226") ) (pad "2" smd roundrect @@ -6280,7 +6823,8 @@ (size 1.125 1.75) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.222222) - (net "VIN_SW") + (net "/VIN_SW") + (pintype "passive") (uuid "c37bb4ba-7afc-41a9-a8a5-9433c1f30915") ) (embedded_fonts no) @@ -6335,7 +6879,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Unpolarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -6358,6 +6902,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/c12a1c5e-4852-4300-9f1e-36ce9beb9704") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -6419,6 +6973,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "91941841-053a-410a-9edb-a297c5d30562") ) (pad "2" smd roundrect @@ -6427,6 +6982,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "de74e38d-5b8d-4b5a-a4aa-f7e813fea1dc") ) (embedded_fonts no) @@ -6481,7 +7037,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -6504,6 +7060,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/dd1f6817-8235-47c0-aac4-dc44fbecdf60") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -6565,6 +7131,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "197013fd-2bc7-4b8f-ae03-c6ece68e5e12") ) (pad "2" smd roundrect @@ -6572,7 +7139,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "LED_A") + (net "/LED_A") + (pintype "passive") (uuid "ac898370-0ada-4eb2-9895-3ca83c833ae6") ) (embedded_fonts no) @@ -6616,7 +7184,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -6650,6 +7218,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/244f1564-b8d4-45fc-b36d-55bf4e2c2aba") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -6710,7 +7288,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "3V3_MODEM") + (net "/3V3_MODEM") + (pintype "passive") (uuid "a267a9b7-0f37-4783-92c0-e2b7b4cbf804") ) (pad "2" smd roundrect @@ -6718,7 +7297,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FB3") + (net "/FB3") + (pintype "passive") (uuid "4e65be41-d2ac-41c9-a454-40250fa2714c") ) (embedded_fonts no) @@ -6885,7 +7465,7 @@ (uuid "47b6df07-8d8f-4049-8ae6-995850cb353e") (at 85.19165 135.3231) (property "Reference" "MH3" - (at 0 0 0) + (at 0.00835 -3.7231 0) (layer "F.SilkS") (uuid "defe0303-6548-4a15-a794-14a2464efb67") (effects @@ -6977,7 +7557,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Bidirectional transient-voltage-suppression diode" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -6990,6 +7570,16 @@ ) ) ) + (property ki_fp_filters "TO-???* *_Diode_* *SingleDiode* D_*") + (path "/b66fe2ae-0549-4edb-bcce-f968eb1d4731") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -7178,7 +7768,9 @@ (size 2.5 2.3) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.1086956522) - (net "24V_IN") + (net "/24V_IN") + (pinfunction "A1_1") + (pintype "passive") (uuid "222ac91e-fb8b-4373-9959-b44d6fef1749") ) (pad "2" smd roundrect @@ -7187,6 +7779,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.1086956522) (net "GND") + (pinfunction "A2_2") + (pintype "passive") (uuid "5ea4d30a-b1e7-4e34-b9ac-b04f29d1b90c") ) (embedded_fonts no) @@ -7351,13 +7945,13 @@ (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (uuid "494de2e3-6a2a-4eb5-8d12-a39e659c0a04") - (at 146.75415 64.3231) + (at 145.45 60.2) (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)") (tags "SOT TO_SOT_SMD") (property "Reference" "Q5" - (at 0 -2.4 0) + (at 0.05 2.6 0) (layer "F.SilkS") - (uuid "60c1734a-ff03-48ab-90c6-97a4536a9e22") + (uuid "6833b8ee-1d30-4611-ae73-c1e0e7105469") (effects (font (size 1 1) @@ -7368,7 +7962,7 @@ (property "Value" "MMBT3904" (at 0 2.4 0) (layer "F.Fab") - (uuid "38000159-577f-41ed-a34c-9154a990e20f") + (uuid "671b5892-9f3d-4109-a26d-20bf2581b374") (effects (font (size 1 1) @@ -7380,7 +7974,7 @@ (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "e3bab688-399b-4e09-b218-17b40a7843c1") + (uuid "972416c4-d6e8-4069-a7ad-da8584bee08a") (effects (font (size 1.27 1.27) @@ -7391,7 +7985,7 @@ (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "8ae75d8f-7f35-4976-adce-a1809dc6172d") + (uuid "14b8f9cc-d7e7-4531-8f67-2a3be5e62305") (effects (font (size 1.27 1.27) @@ -7410,6 +8004,15 @@ ) ) ) + (path "/54f9824a-b651-48e8-91fa-651d260ccca2") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -7682,7 +8285,9 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BASE_LS") + (net "/BASE_LS") + (pinfunction "B_1") + (pintype "input") (uuid "1f7c3967-f9ba-4ef6-85d5-ee969a43b1e8") ) (pad "2" smd roundrect @@ -7690,7 +8295,9 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "GND") + (net "/GATE_LS") + (pinfunction "C_2") + (pintype "passive") (uuid "0d5f9ee5-d58c-417f-afe6-dabd70e0ce3d") ) (pad "3" smd roundrect @@ -7698,7 +8305,9 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "GATE_LS") + (net "GND") + (pinfunction "E_3") + (pintype "passive") (uuid "6a5a2bdd-472b-469e-ab87-9e42b52aa85b") ) (embedded_fonts no) @@ -7753,7 +8362,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Unpolarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -7776,6 +8385,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/70d4610d-4efe-4601-a562-9399c103313d") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -7836,7 +8455,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "5V_SENSE") + (net "/5V_SENSE") + (pintype "passive") (uuid "fe66cbdb-1e36-4cae-ba47-28096ccb1e3a") ) (pad "2" smd roundrect @@ -7845,6 +8465,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "7468fcb7-0a11-40b7-ba5a-17cbd06bc4d7") ) (embedded_fonts no) @@ -7865,7 +8486,7 @@ (uuid "4a40ef1e-05ff-4eb7-8c49-13c46df9b4d4") (at 211.19165 135.3231) (property "Reference" "MH4" - (at 0 0 0) + (at 0.00835 -3.8731 0) (layer "F.SilkS") (uuid "8bd33841-acae-46da-ab2d-7ff67e4d67f7") (effects @@ -7955,7 +8576,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -7978,6 +8599,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/cbecc10d-3a80-4792-908f-1a8bc8c477b7") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -8164,7 +8795,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "VEH5V") + (net "/VEH5V") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "a3197bd6-7d63-435c-9fac-7c8434f6f320") ) (pad "2" thru_hole oval @@ -8174,6 +8807,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "0aa50e56-6b6a-4aed-a3b4-f31f095de2a7") ) (embedded_fonts no) @@ -8217,7 +8852,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -8251,6 +8886,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/a2b3658d-fc41-49f8-8029-418889c4bd0b") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -8311,7 +8956,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "5V_FAN") + (net "/5V_FAN") + (pintype "passive") (uuid "45e265a1-fa34-4dcd-8fd9-e9c51c6d2a70") ) (pad "2" smd roundrect @@ -8319,7 +8965,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FB_FAN") + (net "/FB_FAN") + (pintype "passive") (uuid "6767f8c5-b39e-4ae5-a2f4-96abcf72cefa") ) (embedded_fonts no) @@ -8363,7 +9010,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -8397,6 +9044,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/5b9bca13-615b-4e5f-bf65-18e42653775b") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -8457,7 +9114,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BST3") + (net "/BST3") + (pintype "passive") (uuid "43515181-aeeb-431d-b53b-b2012b3be07c") ) (pad "2" smd roundrect @@ -8465,7 +9123,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW3_NODE") + (net "/SW3_NODE") + (pintype "passive") (uuid "88106242-778c-4f26-8263-cc8c55c68914") ) (embedded_fonts no) @@ -8666,7 +9325,7 @@ ) ) ) - (property "Description" "" + (property "Description" "N-MOSFET transistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -8689,6 +9348,15 @@ ) ) ) + (path "/efaa6614-fd47-4e18-a26d-7ef501ce1b02") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "G" "D" "S") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -8977,7 +9645,7 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FAN_RET") + (net "/FAN_RET") (uuid "bdaf2eec-06dd-4f6e-b3d5-216989d77818") ) (embedded_fonts no) @@ -9156,7 +9824,7 @@ ) ) ) - (property "Value" "USART1-RSV" + (property "Value" "USART1-RSV (DNP)" (at 0 7.46 0) (layer "F.Fab") (uuid "0dc45408-6d2a-4287-b545-baeb2a33fcab") @@ -9178,7 +9846,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -9201,6 +9869,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/599a4f5c-5b15-41e2-ab7e-ccb6545952ee") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -9341,7 +10019,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "USART1_TX") + (net "/USART1_TX") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "b69cc520-6454-4a93-97ad-e90a234545b8") ) (pad "2" thru_hole circle @@ -9351,6 +10031,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "USART1_RX") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "4c974b12-d070-456d-b9fd-d89dbd0ba2de") ) (pad "3" thru_hole circle @@ -9360,6 +10042,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "ba17e9dd-3ced-44b5-bdd9-5753d23997d5") ) (embedded_fonts no) @@ -9403,7 +10087,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -9429,6 +10113,15 @@ ) ) ) + (path "/6ca6eb84-71c7-48fd-97ff-b84241419ed0") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -9627,14 +10320,18 @@ (at -3.9 0) (size 2 3.2) (layers "F.Cu" "F.Mask" "F.Paste") - (net "SW_BAT") + (net "/SW_BAT") + (pinfunction "1_1") + (pintype "passive") (uuid "7b07650f-cd43-4d94-8cb4-8263a3d29d33") ) (pad "2" smd rect (at 3.9 0) (size 2 3.2) (layers "F.Cu" "F.Mask" "F.Paste") - (net "BAT_PLUS") + (net "/BAT_PLUS") + (pinfunction "2_2") + (pintype "passive") (uuid "9344e832-753b-4913-bfe7-4edc3498a2ca") ) (embedded_fonts no) @@ -9678,7 +10375,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -9712,6 +10409,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/3972637f-d7d0-486a-ac40-5d46679e1920") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -9772,7 +10479,8 @@ (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BAT_PLUS") + (net "/BAT_PLUS") + (pintype "passive") (uuid "528c9875-01a5-47ff-a86c-c02907675d13") ) (pad "2" smd roundrect @@ -9781,6 +10489,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "9ab27c59-b392-450b-94b3-886eee6f8ff0") ) (embedded_fonts no) @@ -9803,7 +10512,7 @@ (descr "SOT, 6 Pin (https://www.jedec.org/system/files/docs/MO-293B.pdf)") (tags "SOT TO_SOT_SMD JEDEC-MO-293-UAAD Texas-DRL-6") (property "Reference" "U4" - (at 0 -1.65 0) + (at 0.05835 1.8769 0) (layer "F.SilkS") (uuid "1719ee93-d882-4901-b3af-18bfb737ce6e") (effects @@ -9824,7 +10533,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "https://www.ti.com/lit/ds/symlink/tmp102.pdf" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -9835,7 +10544,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Digital Temperature Sensor, ±3°C, low-Power, SMBus, 12 bit, Two-Wire Serial Interface, SOT-563" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -9858,6 +10567,16 @@ ) ) ) + (property ki_fp_filters "SOT?563*") + (path "/01a2809c-e224-4789-8453-a52a956eb63a") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "6" "1" "4" "5" "2" "3") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -10040,7 +10759,9 @@ (size 0.675 0.35) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "I2C_SCL") + (net "/I2C_SCL") + (pinfunction "SCL_1") + (pintype "input") (uuid "bdbb1a34-19d1-4495-a530-4506733518dd") ) (pad "2" smd roundrect @@ -10049,6 +10770,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "GND_2") + (pintype "power_in") (uuid "39c04366-288f-4194-b442-fd5d4b970fb7") ) (pad "3" smd roundrect @@ -10057,6 +10780,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "unconnected-(U4-ALERT-Pad3)") + (pinfunction "ALERT_3") + (pintype "open_collector+no_connect") (uuid "6078b7b1-3eea-47dd-9770-a08a8db4e01f") ) (pad "4" smd roundrect @@ -10065,6 +10790,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "ADD0_4") + (pintype "input") (uuid "5389713f-371e-434c-a5cf-c3e5d379f6fa") ) (pad "5" smd roundrect @@ -10073,6 +10800,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pinfunction "V+_5") + (pintype "power_in") (uuid "7f1068a7-a46e-4d08-8405-4ef4c5b2e144") ) (pad "6" smd roundrect @@ -10080,7 +10809,9 @@ (size 0.675 0.35) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "I2C_SDA") + (net "/I2C_SDA") + (pinfunction "SDA_6") + (pintype "bidirectional") (uuid "470fffcd-11d4-4b0d-938d-f8d221413078") ) (embedded_fonts no) @@ -10124,7 +10855,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -10158,6 +10889,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/17f6a5cf-6d8e-402e-9967-b8a036caf780") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -10218,7 +10959,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BATLED3") + (net "/BATLED3") + (pintype "passive") (uuid "7d14c42c-777b-4be4-91a3-a33c3b54c441") ) (pad "2" smd roundrect @@ -10226,7 +10968,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED3") + (net "/BLED3") + (pintype "passive") (uuid "10736386-ef6d-4848-ba01-6f6d07a1557b") ) (embedded_fonts no) @@ -10270,7 +11013,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -10296,7 +11039,16 @@ ) ) ) - (attr exclude_from_pos_files exclude_from_bom) + (property ki_fp_filters "Pin* Test*") + (path "/8b481c96-b7e3-470f-8b20-639b23e0dd83") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1") + ) + ) (duplicate_pad_numbers_are_jumpers no) (fp_circle (center 0 0) @@ -10335,7 +11087,9 @@ (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net "CLPROG_TP") + (net "/CLPROG_TP") + (pinfunction "1_1") + (pintype "passive") (uuid "684fb7b0-d8fe-4374-84b4-d36e4848526d") ) (embedded_fonts no) @@ -10368,7 +11122,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -10394,6 +11148,15 @@ ) ) ) + (path "/f89c0e54-d73a-4b33-986a-23ec923edc55") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -10593,13 +11356,17 @@ (size 2 3.2) (layers "F.Cu" "F.Mask" "F.Paste") (net "SW_FAN") + (pinfunction "1_1") + (pintype "passive") (uuid "4afdf589-9ecd-4c42-928a-212c06e141f7") ) (pad "2" smd rect (at 3.9 0) (size 2 3.2) (layers "F.Cu" "F.Mask" "F.Paste") - (net "5V_FAN") + (net "/5V_FAN") + (pinfunction "2_2") + (pintype "passive") (uuid "55433266-0859-4be4-811a-0e05c7873f66") ) (embedded_fonts no) @@ -10654,7 +11421,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Unpolarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -10677,6 +11444,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/9a2cd58c-4828-4017-9c98-e78d67ee128f") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -10738,6 +11515,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "IGN_SENSE") + (pintype "passive") (uuid "c90731b5-a114-486c-a84b-dc2bd035c457") ) (pad "2" smd roundrect @@ -10746,6 +11524,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "b8b89bc4-9c38-4a54-a50e-83230e82d3c3") ) (embedded_fonts no) @@ -10761,6 +11540,317 @@ ) ) ) + (footprint "Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS" + (layer "F.Cu") + (uuid "64369b57-1a0f-4c5d-ac51-230899177a2d") + (at 148.175 135.6) + (descr "Tactile switch, SPST, 6.0x3.5 mm, H2.5 mm, straight, NO, gull wing leads: https://www.ckswitches.com/media/2779/pts636.pdf") + (tags "switch tactile SPST 1P1T straight NO SMTR C&K") + (property "Reference" "SW4G" + (at 0 -3 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "b1b8df2c-192c-476e-8470-8340c8deb9e5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "RESET" + (at 0 3 0) + (unlocked yes) + (layer "F.Fab") + (uuid "c788bcdb-fb1e-4c38-b2e3-cdd80a5ed149") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "0addc1bd-04d1-4cfe-bdec-243d41870920") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "6343b34a-b38a-4fa2-806e-48c46fc0fda4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -3.2 -2) + (end -3.2 -0.8) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0c4a2103-41a0-49b6-ab2f-440345612356") + ) + (fp_line + (start -3.2 0.8) + (end -3.2 2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6bd0f8c9-20de-46f4-bc2a-199c88cda150") + ) + (fp_line + (start -3.2 2) + (end 3.2 2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "8be26042-4c73-4dce-9915-e8a59995eff2") + ) + (fp_line + (start 3.2 -2) + (end -3.2 -2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "3c3000d5-506b-4369-9a11-8778b01b9867") + ) + (fp_line + (start 3.2 -0.8) + (end 3.2 -2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75e2bbc3-0f7f-4e08-a145-60ebedca5e7a") + ) + (fp_line + (start 3.2 2) + (end 3.2 0.8) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6ecc627c-a8cf-4309-9fed-0165839e91ba") + ) + (fp_rect + (start -1.35 -0.65) + (end 1.35 0.65) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "Dwgs.User") + (uuid "b74b8233-e21d-4e8e-b0db-446e6a07e710") + ) + (fp_line + (start -4.75 -0.75) + (end -3.3 -0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "76623b05-5a8b-41f1-af41-85db2aea5bf8") + ) + (fp_line + (start -4.75 0.75) + (end -4.75 -0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "64949220-218c-4b58-ab83-3c28ff594f2d") + ) + (fp_line + (start -3.3 -2.1) + (end 3.3 -2.1) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2a76f3eb-3e4e-4bd3-8f6c-213b30c945ad") + ) + (fp_line + (start -3.3 -0.75) + (end -3.3 -2.1) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "881ebcdf-39b3-4c19-b7d3-b071077d49f9") + ) + (fp_line + (start -3.3 0.75) + (end -4.75 0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3c69ce1c-9358-4f48-8372-5c27e1d9bf31") + ) + (fp_line + (start -3.3 2.1) + (end -3.3 0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "62ddceeb-4236-4c0b-b68d-a66ce5e8965e") + ) + (fp_line + (start 3.3 -2.1) + (end 3.3 -0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b28160ba-0855-4dac-89d0-dc6bd3b5b83c") + ) + (fp_line + (start 3.3 -0.75) + (end 4.75 -0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a6a7a37c-88ba-499c-96f7-ff019d49aede") + ) + (fp_line + (start 3.3 0.75) + (end 3.3 2.1) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e3fda8ba-4b63-4693-9174-985f90daf81f") + ) + (fp_line + (start 3.3 2.1) + (end -3.3 2.1) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "625cc176-0cee-4569-b0e7-126e735b5829") + ) + (fp_line + (start 4.75 -0.75) + (end 4.75 0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "92ea5f7a-0b90-470e-9414-3f180e4735e6") + ) + (fp_line + (start 4.75 0.75) + (end 3.3 0.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d37c57c-7a1d-4a71-bfaa-105a1a117586") + ) + (fp_rect + (start -3.05 -1.85) + (end 3.05 1.85) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "27577129-d38b-471b-9c6c-f0321db14c25") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (uuid "6db7c2ca-a507-4110-a1de-1ace3603b6b7") + (effects + (font + (size 0.5 0.5) + (thickness 0.1) + ) + ) + ) + (pad "1" smd rect + (at -3.875 0) + (size 1.25 1) + (layers "F.Cu" "F.Mask" "F.Paste") + (net "/MODEM_RST") + (pinfunction "1_1") + (pintype "passive") + (uuid "c40f0242-1db6-4475-9b89-e7b2dad0c268") + ) + (pad "2" smd rect + (at 3.875 0) + (size 1.25 1) + (layers "F.Cu" "F.Mask" "F.Paste") + (net "GND") + (pinfunction "2_2") + (pintype "passive") + (uuid "77ce18b7-7ca9-4b02-bfcf-90f5a68cb1e1") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical" (layer "F.Cu") (uuid "673602e3-b0eb-479c-8357-02021669dd29") @@ -10789,7 +11879,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -10823,6 +11913,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/b68f94b2-3503-42f0-9c64-a2c78ad320b2") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4" "5" "6" "7" "8" "9" "10") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -10992,7 +12092,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J8-Pin_1-Pad1)") + (net "GND") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "5ebda082-d562-4f26-bf3b-54ab47ea129b") ) (pad "2" thru_hole circle @@ -11002,6 +12104,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J8-Pin_2-Pad2)") + (pinfunction "Pin_2_2") + (pintype "passive+no_connect") (uuid "e089aea0-c3e5-4eb0-ba5d-693f90d660c7") ) (pad "3" thru_hole circle @@ -11011,6 +12115,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J8-Pin_3-Pad3)") + (pinfunction "Pin_3_3") + (pintype "passive+no_connect") (uuid "5ff491d0-c97d-436b-a6e8-3617a5a8283f") ) (pad "4" thru_hole circle @@ -11020,6 +12126,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J8-Pin_4-Pad4)") + (pinfunction "Pin_4_4") + (pintype "passive+no_connect") (uuid "012d9b63-5b41-43a6-8541-4ae352d8692f") ) (pad "5" thru_hole circle @@ -11029,6 +12137,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J8-Pin_5-Pad5)") + (pinfunction "Pin_5_5") + (pintype "passive+no_connect") (uuid "5cc38792-7af4-49bd-bec0-de506a22893a") ) (pad "6" thru_hole circle @@ -11037,7 +12147,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J8-Pin_6-Pad6)") + (net "GND") + (pinfunction "Pin_6_6") + (pintype "passive") (uuid "044075d7-b0e9-4f5b-b5ec-d05a20dbf2a4") ) (pad "7" thru_hole circle @@ -11046,7 +12158,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J8-Pin_7-Pad7)") + (net "/3V3_MODEM") + (pinfunction "Pin_7_7") + (pintype "passive") (uuid "1df234ce-e902-4194-aa25-21db98b91d59") ) (pad "8" thru_hole circle @@ -11055,7 +12169,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J8-Pin_8-Pad8)") + (net "/MODEM_LED") + (pinfunction "Pin_8_8") + (pintype "passive") (uuid "fc4f7b85-95c8-40c7-8efd-f2d62b508869") ) (pad "9" thru_hole circle @@ -11065,6 +12181,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J8-Pin_9-Pad9)") + (pinfunction "Pin_9_9") + (pintype "passive+no_connect") (uuid "3e79d413-949f-4ee5-b466-126ca5ebea15") ) (pad "10" thru_hole circle @@ -11073,7 +12191,9 @@ (drill 0.8) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "unconnected-(J8-Pin_10-Pad10)") + (net "GND") + (pinfunction "Pin_10_10") + (pintype "passive") (uuid "50e38958-45a4-417a-bd4a-faaf6cc4b84d") ) (embedded_fonts no) @@ -11117,7 +12237,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 180) (layer "F.Fab") (hide yes) @@ -11151,6 +12271,15 @@ ) ) ) + (path "/18efa277-37f2-4004-b275-ae98e7a847f7") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "7" "2" "6" "4" "3" "5" "8" "1") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -11402,6 +12531,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "SW_FAN") + (pinfunction "SW_1") + (pintype "passive") (uuid "0a4e8417-dc98-4e44-b3b8-7b429ee04af6") ) (pad "2" smd roundrect @@ -11409,7 +12540,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "EN_FAN") + (net "/EN_FAN") + (pinfunction "EN_2") + (pintype "passive") (uuid "3204b9e6-5e58-42fb-bcda-d6447a2b5d3d") ) (pad "3" smd roundrect @@ -11418,6 +12551,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "COMP_FAN") + (pinfunction "COMP_3") + (pintype "passive") (uuid "d929c2d7-4f14-4cea-a699-7702461060fd") ) (pad "4" smd roundrect @@ -11425,7 +12560,9 @@ (size 1.95 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FB_FAN") + (net "/FB_FAN") + (pinfunction "FB_4") + (pintype "passive") (uuid "cca1aa9b-cc73-49e1-bfc9-f756b94dc8de") ) (pad "5" smd roundrect @@ -11434,6 +12571,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "GND_5") + (pintype "power_in") (uuid "2896cf75-4c13-4c25-bd6f-e8cf830f433a") ) (pad "6" smd roundrect @@ -11442,6 +12581,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "FREQ_FAN") + (pinfunction "FREQ_6") + (pintype "passive") (uuid "1dde21bb-2607-4d7c-8acf-0d1af71f63a4") ) (pad "7" smd roundrect @@ -11450,6 +12591,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "24V") + (pinfunction "VIN_7") + (pintype "power_in") (uuid "4f0042f1-d49f-465d-8f43-e23b196bfdcd") ) (pad "8" smd roundrect @@ -11458,6 +12601,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "BST_FAN") + (pinfunction "BST_8") + (pintype "passive") (uuid "40c6b052-0e8b-4b25-9bb1-ee19cb275758") ) (pad "9" smd rect @@ -11510,7 +12655,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -11544,6 +12689,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/754a18fd-7854-4a98-9a4c-cfcdacba5676") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -11604,7 +12759,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BATLED4") + (net "/BATLED4") + (pintype "passive") (uuid "4d8b4504-27b9-4bd9-8d6d-84d4e3ad5ecb") ) (pad "2" smd roundrect @@ -11612,7 +12768,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED4") + (net "/BLED4") + (pintype "passive") (uuid "8dbb9c57-9fab-4424-9737-3b48105f034b") ) (embedded_fonts no) @@ -11635,7 +12792,7 @@ (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "capacitor") (property "Reference" "C22" - (at 0 -2.3 90) + (at -0.1519 2.60835 90) (layer "F.SilkS") (uuid "32fffedf-2e00-466f-9c41-44f69629db5e") (effects @@ -11656,7 +12813,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -11690,6 +12847,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/36012a7d-9c67-4909-96f5-e3af11c29e79") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -11751,6 +12918,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.217391) (net "24V") + (pintype "passive") (uuid "d04996ad-8d8f-42d5-bd3d-23a7c293603f") ) (pad "2" smd roundrect @@ -11759,6 +12927,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.217391) (net "GND") + (pintype "passive") (uuid "d420ed45-b51f-4a24-8328-b84e54b6958b") ) (embedded_fonts no) @@ -11802,7 +12971,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -11836,6 +13005,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/a8a875a9-9509-4bd0-bdce-e9001b2b9d21") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -11896,7 +13075,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FB3") + (net "/FB3") + (pintype "passive") (uuid "abb86eee-7e33-47f8-bc82-2b0aed0c6570") ) (pad "2" smd roundrect @@ -11905,6 +13085,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "f9ac03e5-9ce5-4def-a898-d9ba6e227a23") ) (embedded_fonts no) @@ -11920,6 +13101,164 @@ ) ) ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "6b72fb05-7538-4a15-b6b7-b3d57a0ab90d") + (at 161.425 124.75 90) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") + (tags "resistor") + (property "Reference" "Rcc1" + (at 0 -1.43 90) + (layer "F.SilkS") + (uuid "ec8b442a-cf9f-4c8c-8a76-02379b87d516") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "5.1k" + (at 0 1.43 90) + (layer "F.Fab") + (uuid "8dacb1d7-9d64-428c-8195-ecec1f3c6b10") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "~" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "64e6d791-5dcd-42fc-98b1-3bfb0a0f6d27") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "d888d7d9-6721-4527-9e66-43cd33aa6d20") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "KiLib_Generator" "SMD_2terminal_chip_molded" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "9fdb4eb9-3329-4e9b-9f1e-cf6408f20fe9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property ki_fp_filters "R_*") + (path "/52461a06-4f3c-4dee-b32e-d6497534d73c") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6f9af1bb-20d1-4b63-b579-426f0cd9fc63") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "3be40bb6-0512-49ba-8d20-f519cea42c51") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "1c7a0171-2f7b-4999-a200-0575ab30949e") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "73106c47-c65d-4fe2-9a93-23871774be9d") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (uuid "84cfc9be-7a21-495c-9aec-678a698b4546") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/USB_CC1") + (pintype "passive") + (uuid "5292bab0-95c1-49ed-acd4-98f17dbfe67c") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "GND") + (pintype "passive") + (uuid "8ab9c5d4-4799-43f9-8735-76a6a2a14e23") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Resistor_SMD:R_0603_1608Metric" (layer "F.Cu") (uuid "6d405745-fae8-4e29-aee6-c92ce4ae786f") @@ -11959,7 +13298,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -11982,6 +13321,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/44654388-d913-4e26-a9a4-6890b99c09fd") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -12042,7 +13391,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PWR_CTRL") + (net "/PWR_CTRL") + (pintype "passive") (uuid "61c6b66d-ef55-442e-bc4b-4b4136e3ed7d") ) (pad "2" smd roundrect @@ -12050,7 +13400,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BASE_LS") + (net "/BASE_LS") + (pintype "passive") (uuid "179f2d02-cf45-41d6-99a1-432c272edb47") ) (embedded_fonts no) @@ -12105,7 +13456,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -12128,6 +13479,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/bfbff7b5-f3f9-4ffc-9080-67e0aa9db717") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -12315,6 +13676,8 @@ (remove_unused_layers no) (roundrect_rratio 0.147059) (net "3V3") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "61fc5daf-76d8-4931-ae05-94a43b10899b") ) (pad "2" thru_hole oval @@ -12324,6 +13687,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "b215aabb-b998-4057-924d-76932709eea0") ) (pad "3" thru_hole oval @@ -12332,7 +13697,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "I2C_SDA") + (net "/I2C_SDA") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "241cf927-da77-4faf-9e73-0992da5b5033") ) (pad "4" thru_hole oval @@ -12341,7 +13708,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "I2C_SCL") + (net "/I2C_SCL") + (pinfunction "Pin_4_4") + (pintype "passive") (uuid "192f1897-e192-411b-b1b4-2c5173b3750a") ) (embedded_fonts no) @@ -12385,7 +13754,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -12419,6 +13788,16 @@ ) ) ) + (property ki_fp_filters "LED* LED_SMD:* LED_THT:*") + (path "/c5bd65a2-6622-4d6d-b84b-327eb8f5b2f4") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -12529,6 +13908,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "K_1") + (pintype "passive") (uuid "0b30a263-213c-4e3f-ae97-dc9c237308c3") ) (pad "2" smd roundrect @@ -12536,7 +13917,9 @@ (size 0.975 1.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED3") + (net "/BLED3") + (pinfunction "A_2") + (pintype "passive") (uuid "abfdcff8-4f1c-4b9b-8dfa-264185728e8d") ) (embedded_fonts no) @@ -12580,7 +13963,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 270) (layer "F.Fab") (hide yes) @@ -12614,6 +13997,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/834d78c9-e3e8-4940-9732-684ec1a297d7") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -12674,7 +14067,8 @@ (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "3V3_MODEM") + (net "/3V3_MODEM") + (pintype "passive") (uuid "df95735d-c048-4ef2-9259-212d9281d904") ) (pad "2" smd roundrect @@ -12683,6 +14077,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "75cc48b4-e0cc-46d9-90c6-78fe6d5c6ac4") ) (embedded_fonts no) @@ -12726,7 +14121,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -12760,6 +14155,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/4d0ef1e4-3a44-420f-952d-c6b2429690d5") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -12820,7 +14225,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pintype "passive") (uuid "aaec595a-ede5-47e8-a743-a62049582120") ) (pad "2" smd roundrect @@ -12828,7 +14234,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "NTC") + (net "/NTC") + (pintype "passive") (uuid "62c52b28-8f81-4737-8800-80463ffa29aa") ) (embedded_fonts no) @@ -13018,7 +14425,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -13044,8 +14451,18 @@ ) ) ) + (property ki_fp_filters "SolderJumper*Bridged12*") + (path "/80e14ed9-373f-44a0-ad34-e23dcd4af218") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (zone_connect 1) - (attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges) + (attr allow_soldermask_bridges) (net_tie_pad_groups "1,2") (duplicate_pad_numbers_are_jumpers no) (fp_poly @@ -13229,7 +14646,9 @@ (at -1.3 0) (size 1 0.5) (layers "F.Cu" "F.Mask") - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "A_1") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -13263,7 +14682,9 @@ (at 0 0) (size 1 1.5) (layers "F.Cu" "F.Mask") - (net "F0_SEL") + (net "/F0_SEL") + (pinfunction "C_2") + (pintype "passive") (uuid "a0cbb7b5-5373-4385-bd80-128396c074a1") ) (pad "3" smd custom @@ -13271,6 +14692,8 @@ (size 1 0.5) (layers "F.Cu" "F.Mask") (net "GND") + (pinfunction "B_3") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -13309,7 +14732,7 @@ (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "resistor") (property "Reference" "Rgs" - (at 0 -1.43 0) + (at -2.44165 0.0269 270) (layer "F.SilkS") (uuid "a2d86c6d-e57d-4fa9-810e-3dbb340458bd") (effects @@ -13487,7 +14910,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 270) (layer "F.Fab") (hide yes) @@ -13510,6 +14933,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/ea0a13a6-5173-40ae-b75c-76f7be6be64d") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -13696,7 +15129,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "LED_A") + (net "/LED_A") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "2f86c1e0-34bf-4ed7-85e0-b80ff229767f") ) (pad "2" thru_hole oval @@ -13705,7 +15140,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "LED_K") + (net "/LED_K") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "5690a30b-62d9-429c-abd0-a0c8488d35b7") ) (embedded_fonts no) @@ -13749,7 +15186,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -13783,6 +15220,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/4dd2a3d7-276b-4efb-b89f-47280c040af3") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -13843,7 +15290,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "Q6_BASE") + (net "/Q6_BASE") + (pintype "passive") (uuid "62cd221b-fcc4-43d1-8b00-a09e605e8110") ) (pad "2" smd roundrect @@ -13852,6 +15300,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "0bc8a6b5-0886-4461-b236-ef90306b752d") ) (embedded_fonts no) @@ -13895,7 +15344,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -13929,6 +15378,16 @@ ) ) ) + (property ki_fp_filters "LED* LED_SMD:* LED_THT:*") + (path "/4b34adbb-9cd4-4540-91a6-c073c1367e91") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -14039,6 +15498,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "K_1") + (pintype "passive") (uuid "41d2b9e7-9340-4b14-b68d-3c797da52f80") ) (pad "2" smd roundrect @@ -14046,7 +15507,9 @@ (size 0.975 1.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED4") + (net "/BLED4") + (pinfunction "A_2") + (pintype "passive") (uuid "b5da1ced-3d84-40f0-b1fd-6948309a1211") ) (embedded_fonts no) @@ -14090,7 +15553,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -14124,6 +15587,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/ec980939-7314-4d25-88ad-6e654476a4ea") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -14184,7 +15657,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BATLED2") + (net "/BATLED2") + (pintype "passive") (uuid "4158580f-349c-4a81-84c2-50198c49020c") ) (pad "2" smd roundrect @@ -14192,7 +15666,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED2") + (net "/BLED2") + (pintype "passive") (uuid "cb8bcaee-67a1-4b25-9275-65beadff4928") ) (embedded_fonts no) @@ -14208,6 +15683,164 @@ ) ) ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "794667cf-18c6-49c6-a91e-c7d7b44b1b8d") + (at 165.4 124.75 90) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") + (tags "resistor") + (property "Reference" "Rcc2" + (at 0 -1.43 90) + (layer "F.SilkS") + (uuid "379d25c0-f969-4df3-93fe-24bb0a736f73") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "5.1k" + (at 0 1.43 90) + (layer "F.Fab") + (uuid "08d7d453-0532-4db5-bdd2-d6226389975e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "~" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "2c531652-5d63-416e-af6b-37589143307f") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "10925c53-30bb-4f33-a7d3-1eeb6bc0f323") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "KiLib_Generator" "SMD_2terminal_chip_molded" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "cf584725-23c1-4ce9-81df-01706b189e93") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property ki_fp_filters "R_*") + (path "/e2807b21-209d-4241-80f4-b316ec733a73") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "2565348d-c32e-4d19-b741-9868d06b0b2b") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "3677cc97-6667-4bc0-8a04-725cfc7f93a9") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "501f57c8-0f86-49a3-8087-3f6f9c1e0086") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "6620beca-38ad-46f9-a69d-9bcb11fbf399") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (uuid "77a30d2f-0d3e-405c-bf8d-0c8d4d977171") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/USB_CC2") + (pintype "passive") + (uuid "2de00828-7858-42a4-bdf0-363810e1fd2f") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "GND") + (pintype "passive") + (uuid "9abf5499-94e6-40f5-acba-8b46c3f1ad81") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "LED_SMD:LED_0805_2012Metric" (layer "F.Cu") (uuid "7fee6eff-4b3f-4f2d-adf8-ee0f1f87a433") @@ -14215,7 +15848,7 @@ (descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)") (tags "LED") (property "Reference" "D1" - (at 2.725 -1.65 0) + (at -0.04165 1.9769 0) (layer "F.SilkS") (uuid "e5fe615a-4d91-414f-a86d-f2023726624f") (effects @@ -14247,7 +15880,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Light emitting diode" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -14270,6 +15903,29 @@ ) ) ) + (property "Sim.Pins" "1=K 2=A" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "18afb1c7-46b8-46f0-ba17-b3e88485e916") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property ki_fp_filters "LED* LED_SMD:* LED_THT:*") + (path "/6e0f211a-0b29-40d9-8497-573317e3e00f") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -14379,7 +16035,9 @@ (size 0.975 1.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "LED_K") + (net "/LED_K") + (pinfunction "K_1") + (pintype "passive") (uuid "38760981-21a8-4006-9cfd-8337a38c097e") ) (pad "2" smd roundrect @@ -14387,7 +16045,9 @@ (size 0.975 1.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "LED_A") + (net "/LED_A") + (pinfunction "A_2") + (pintype "passive") (uuid "d16d47ea-6a81-4647-9cdd-f509c4c1eb2d") ) (embedded_fonts no) @@ -14577,7 +16237,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -14603,8 +16263,18 @@ ) ) ) + (property ki_fp_filters "SolderJumper*Open*") + (path "/d9dd9b5f-4e83-435b-a956-d7b65d6c6959") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (zone_connect 1) - (attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges) + (attr allow_soldermask_bridges) (duplicate_pad_numbers_are_jumpers no) (fp_rect (start -0.15 -0.75) @@ -14745,7 +16415,9 @@ (at -0.65 0) (size 1 0.5) (layers "F.Cu" "F.Mask") - (net "5V_FAN") + (net "/5V_FAN") + (pinfunction "A_1") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -14779,7 +16451,9 @@ (at 0.65 0) (size 1 0.5) (layers "F.Cu" "F.Mask") - (net "VEH5V") + (net "/VEH5V") + (pinfunction "B_2") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -14850,7 +16524,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -14873,6 +16547,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/8076dc79-9973-4b18-ab17-881e5fed8e90") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -14934,6 +16618,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "c8b17393-e86c-439e-b40a-e6753d06d01d") ) (pad "2" smd roundrect @@ -14941,7 +16626,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "I2C_SCL") + (net "/I2C_SCL") + (pintype "passive") (uuid "48a10eaf-9b99-4c04-a40b-b7ca912aa026") ) (embedded_fonts no) @@ -14996,7 +16682,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -15019,6 +16705,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/e3e3de1a-9deb-4176-8099-c323b1f76bad") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -15079,7 +16775,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BAT_SENSE") + (net "/BAT_SENSE") + (pintype "passive") (uuid "c357575e-9a60-4745-b4c2-491a1da17344") ) (pad "2" smd roundrect @@ -15088,6 +16785,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "eca5fbf2-6833-4875-987a-1b54266d8cf2") ) (embedded_fonts no) @@ -15131,7 +16829,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -15165,6 +16863,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/16013d26-cb77-4d7a-8d37-3c93c50cf8ca") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -15351,7 +17059,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "NTC_TEMP") + (net "/NTC_TEMP") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "e1c3a681-a6a7-4804-b7aa-da0ad532e841") ) (pad "2" thru_hole oval @@ -15361,6 +17071,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "196d9f8c-0f77-4a9a-abbd-dd7e68451874") ) (embedded_fonts no) @@ -15404,7 +17116,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -15438,6 +17150,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/7fc7f30b-5769-4386-9828-fc5a252576a5") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -15498,7 +17220,8 @@ (size 1.15 2.7) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.217391) - (net "MAIN5V") + (net "/MAIN5V") + (pintype "passive") (uuid "f8b5bde3-7b0b-46db-90d8-332438aafabb") ) (pad "2" smd roundrect @@ -15507,6 +17230,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.217391) (net "GND") + (pintype "passive") (uuid "abec47a2-0503-4270-afc7-e5685335318b") ) (embedded_fonts no) @@ -15522,6 +17246,473 @@ ) ) ) + (footprint "Connector_USB:USB_C_Receptacle_GCT_USB4085" + (layer "F.Cu") + (uuid "8b2551c5-c2fc-45a7-aa6e-033d2ece25df") + (at 161.175 129.425) + (descr "USB 2.0 Type C Receptacle, https://gct.co/Files/Drawings/USB4085.pdf") + (tags "USB Type-C Receptacle Through-hole Right angle") + (property "Reference" "J9" + (at 2.975 -1.8 0) + (layer "F.SilkS") + (uuid "1602b983-f63e-4b3e-85e3-4377a68652ef") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "USB-C" + (at 2.975 9.925 0) + (layer "F.Fab") + (uuid "fc3be94a-d825-4969-b4c7-441392885658") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "65b2e047-0a05-44f0-8da8-84b5012a8725") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "d4305da7-e986-41d2-807b-6f666c2ab4ab") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property ki_fp_filters "USB*C*Receptacle*") + (path "/a549c399-3fd2-4e48-a8bd-8342c72ccb4a") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "SH" "A1" "A12" "B1" "B12" "A4" "A9" "B4" "B9" "A5" "B5" "A7" "B7" + "A6" "B6" + ) + ) + ) + (attr through_hole) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -1.62 2.4) + (end -1.62 3.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bf9ee043-41a3-4872-9645-8684fd1fde7a") + ) + (fp_line + (start -1.62 6) + (end -1.62 8.73) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "c1eed6d9-54d7-4da6-b54e-bd334eb992d3") + ) + (fp_line + (start -1.62 8.73) + (end 7.57 8.73) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6779f669-b6c6-4b56-ac82-3d4f7c936f8b") + ) + (fp_line + (start -1.5 -0.68) + (end 7.45 -0.68) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "696ffecb-fd38-4320-a777-5f9d65d8d88e") + ) + (fp_line + (start 7.57 2.4) + (end 7.57 3.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4b0aa7ef-5fc6-4dc5-867e-028a25fe7d28") + ) + (fp_line + (start 7.57 6) + (end 7.57 8.73) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e18ba0d7-5235-4074-9051-f2fb1bab1b19") + ) + (fp_line + (start -2.3 -1.06) + (end -2.3 9.11) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "debe61a8-880e-474f-84bd-47c7a8d1ec3c") + ) + (fp_line + (start -2.3 -1.06) + (end 8.25 -1.06) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "86b1ce55-c032-43e6-a0cf-6f08357a4f58") + ) + (fp_line + (start -2.3 9.11) + (end 8.25 9.11) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d9ed6e25-d5d5-46bf-97e9-bf5d69f23bc3") + ) + (fp_line + (start 8.25 -1.06) + (end 8.25 9.11) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f6697a95-4621-4f26-99bb-c051e27a898e") + ) + (fp_line + (start -1.5 -0.56) + (end -1.5 8.61) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7dbe59d1-784d-4a41-b899-d7b4e2167e16") + ) + (fp_line + (start -1.5 -0.56) + (end 7.45 -0.56) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "93dae236-9ca3-4700-99ca-52cc9a91f55b") + ) + (fp_line + (start -1.5 8.61) + (end 7.45 8.61) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9094858a-8d3e-4c5a-8bdb-0ec08770492b") + ) + (fp_line + (start -0.025 6.1) + (end 5.975 6.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "49df0925-c387-4bb9-bfb5-bef2d8b8cdb3") + ) + (fp_line + (start 7.45 -0.56) + (end 7.45 8.61) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "5c67addd-06c6-4326-9642-4f74d31abe15") + ) + (fp_text user "PCB Edge" + (at 2.975 6.1 0) + (layer "Dwgs.User") + (uuid "020a5fb4-726a-4a81-8d80-3bef6ba567da") + (effects + (font + (size 0.5 0.5) + (thickness 0.1) + ) + ) + ) + (fp_text user "${REFERENCE}" + (at 2.975 4.025 0) + (layer "F.Fab") + (uuid "9fa75a80-8e8f-4cdc-8dda-9c76facbbf31") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "A1" thru_hole circle + (at 0 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "GND_A1") + (pintype "passive") + (uuid "54f59d9e-581a-40a2-8ad2-11c5a111fb81") + ) + (pad "A4" thru_hole circle + (at 0.85 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_VBUS") + (pinfunction "VBUS_A4") + (pintype "passive") + (uuid "972a27ae-76d8-45cf-abb0-9bcd17920524") + ) + (pad "A5" thru_hole circle + (at 1.7 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_CC1") + (pinfunction "CC1_A5") + (pintype "bidirectional") + (uuid "38c6a9a2-0985-4808-9053-92b2ebf53063") + ) + (pad "A6" thru_hole circle + (at 2.55 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_DP") + (pinfunction "D+_A6") + (pintype "bidirectional") + (uuid "96e67ec9-75c9-43e5-bb43-70f6929a4911") + ) + (pad "A7" thru_hole circle + (at 3.4 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_DM") + (pinfunction "D-_A7") + (pintype "bidirectional") + (uuid "8e9a3817-b584-4c7a-b43f-b584bc8e0647") + ) + (pad "A8" thru_hole circle + (at 4.25 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "ac56a5c5-466e-440b-9e88-6ad38470e604") + ) + (pad "A9" thru_hole circle + (at 5.1 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_VBUS") + (pinfunction "VBUS_A9") + (pintype "passive") + (uuid "8c2f4ebb-d1ea-472d-bf66-11e49e2d4be6") + ) + (pad "A12" thru_hole circle + (at 5.95 0) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "GND_A12") + (pintype "passive") + (uuid "83a260af-b258-4c13-b90e-1088fa8c06bd") + ) + (pad "B1" thru_hole circle + (at 5.95 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "GND_B1") + (pintype "passive") + (uuid "f7950391-ae60-468c-b59d-59ee05a64953") + ) + (pad "B4" thru_hole circle + (at 5.1 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_VBUS") + (pinfunction "VBUS_B4") + (pintype "passive") + (uuid "f8b84166-4bdd-4f97-8013-4a95c6e343b7") + ) + (pad "B5" thru_hole circle + (at 4.25 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_CC2") + (pinfunction "CC2_B5") + (pintype "bidirectional") + (uuid "da7c5594-b932-4454-a63e-bfd009e4c47d") + ) + (pad "B6" thru_hole circle + (at 3.4 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_DP") + (pinfunction "D+_B6") + (pintype "bidirectional") + (uuid "7c66e8ba-bfe8-487c-a694-6540c12a37a6") + ) + (pad "B7" thru_hole circle + (at 2.55 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_DM") + (pinfunction "D-_B7") + (pintype "bidirectional") + (uuid "0f9c2353-9228-4297-af1a-43a9cd180e4c") + ) + (pad "B8" thru_hole circle + (at 1.7 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "1b36301e-d4c2-4c60-a353-45443d137065") + ) + (pad "B9" thru_hole circle + (at 0.85 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "/USB_VBUS") + (pinfunction "VBUS_B9") + (pintype "passive") + (uuid "203023ab-819c-40bc-aa5f-bf90b03c3d3d") + ) + (pad "B12" thru_hole circle + (at 0 1.35) + (size 0.7 0.7) + (drill 0.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "GND_B12") + (pintype "passive") + (uuid "4dfb0aab-8f51-4423-b29a-6f41749219ee") + ) + (pad "SH" thru_hole oval + (at -1.35 0.98) + (size 0.9 2.4) + (drill oval 0.6 2.1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "SHIELD_SH") + (pintype "passive") + (uuid "592caaff-1f17-4102-9f47-65ce768a1eb5") + ) + (pad "SH" thru_hole oval + (at -1.35 4.36) + (size 0.9 1.7) + (drill oval 0.6 1.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "SHIELD_SH") + (pintype "passive") + (uuid "29b28c45-2ac5-44ad-907f-cc1fb5c18f1e") + ) + (pad "SH" thru_hole oval + (at 7.3 0.98) + (size 0.9 2.4) + (drill oval 0.6 2.1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "SHIELD_SH") + (pintype "passive") + (uuid "b64e7eda-c795-400e-8923-2c53a1470e29") + ) + (pad "SH" thru_hole oval + (at 7.3 4.36) + (size 0.9 1.7) + (drill oval 0.6 1.4) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net "GND") + (pinfunction "SHIELD_SH") + (pintype "passive") + (uuid "0e6adfba-ceba-4472-ada0-8da51d96c34a") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_GCT_USB4085.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (uuid "8cfedab7-efbb-46a1-9ece-cc51021939cb") @@ -15561,7 +17752,7 @@ ) ) ) - (property "Description" "" + (property "Description" "N-MOSFET transistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -15584,6 +17775,15 @@ ) ) ) + (path "/a1230757-943d-40eb-9f66-6ca02a536751") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "G" "D" "S") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -15872,7 +18072,7 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "LED_K") + (net "/LED_K") (uuid "35d6ac6c-06b8-4b9b-83a4-d1715485c536") ) (embedded_fonts no) @@ -15927,7 +18127,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 270) (layer "F.Fab") (hide yes) @@ -15950,6 +18150,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/0108bbc7-5b9d-4e76-a0d0-204d5f7f6d42") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4" "5") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -16308,7 +18518,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.096154) - (net "24V_IN") + (net "/24V_IN") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "35abd65b-2aea-4ef9-b92b-2a4f81c2d02d") ) (pad "2" thru_hole circle @@ -16318,6 +18530,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "62d78790-7057-4e28-af77-e40fd5169a00") ) (pad "3" thru_hole circle @@ -16327,6 +18541,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "IGN_IN") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "f40ec2e0-2aee-4b70-80d0-1e96f5386ee5") ) (pad "4" thru_hole circle @@ -16336,6 +18552,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(P1-Pin_4-Pad4)") + (pinfunction "Pin_4_4") + (pintype "passive+no_connect") (uuid "71b36972-9767-4679-a8fd-74a890cd9dc7") ) (pad "5" thru_hole circle @@ -16345,6 +18563,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(P1-Pin_5-Pad5)") + (pinfunction "Pin_5_5") + (pintype "passive+no_connect") (uuid "917ad533-7969-4d05-aac6-c65d4eaf1218") ) (embedded_fonts no) @@ -16399,7 +18619,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resettable fuse, polymeric positive temperature coefficient" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -16422,6 +18642,16 @@ ) ) ) + (property ki_fp_filters "*polyfuse* *PTC*") + (path "/d2cddde5-6919-4d00-bf21-82f62c607400") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -16482,7 +18712,8 @@ (size 1.125 3.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.222222) - (net "SYS5V") + (net "/SYS5V") + (pintype "passive") (uuid "46daeccc-2576-4ff0-9015-00a32f749cd9") ) (pad "2" smd roundrect @@ -16490,7 +18721,8 @@ (size 1.125 3.4) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.222222) - (net "SW_IN") + (net "/SW_IN") + (pintype "passive") (uuid "66d1c195-5937-4995-9cb3-2d98e9f744c3") ) (embedded_fonts no) @@ -16534,7 +18766,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -16568,6 +18800,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/81d0dafb-9504-49f7-b3aa-8568a46c673c") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -16628,7 +18870,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PFI") + (net "/PFI") + (pintype "passive") (uuid "a399671b-58ab-46bb-92d9-a0be85d232da") ) (pad "2" smd roundrect @@ -16637,6 +18880,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "60b97885-28b0-461a-8689-317ece3c097c") ) (embedded_fonts no) @@ -16657,7 +18901,7 @@ (uuid "913ffcf1-59d9-4cf5-94f4-5edba444c0c6") (at 211.19165 45.3231) (property "Reference" "MH2" - (at 0 0 0) + (at 0.00835 4.0769 0) (layer "F.SilkS") (uuid "26cca35e-8776-4ca3-9784-5867b249e55a") (effects @@ -16736,7 +18980,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -16762,6 +19006,16 @@ ) ) ) + (property ki_fp_filters "Relay*SPDT*Omron*G5V?1*") + (path "/fffd3c33-feb9-47e3-aa19-730ba833e712") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "2" "9" "1" "5" "6" "10") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -17022,6 +19276,7 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "USART1_RX") + (pintype "passive") (uuid "ad3cd9d1-3663-4513-b9b3-e906eaa40cee") ) (pad "2" thru_hole circle @@ -17030,7 +19285,8 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "SYS5V") + (net "/SYS5V") + (pintype "passive") (uuid "9b5b8c0a-6fb8-4245-92de-2b761fae1613") ) (pad "5" thru_hole circle @@ -17039,7 +19295,8 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "DIN_4G") + (net "/DIN_4G") + (pintype "passive") (uuid "8b632b1a-32c2-417a-8b96-f23c29b235b5") ) (pad "6" thru_hole circle @@ -17048,7 +19305,8 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "DIN_4G") + (net "/DIN_4G") + (pintype "passive") (uuid "fe53d862-014e-45c3-a40c-63d4db785eb3") ) (pad "9" thru_hole circle @@ -17057,7 +19315,8 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "KCOIL") + (net "/KCOIL") + (pintype "passive") (uuid "8a3b0f7c-c618-476e-a6ad-3f8651a56e9c") ) (pad "10" thru_hole circle @@ -17066,7 +19325,8 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "USART1_TX") + (net "/USART1_TX") + (pintype "passive") (uuid "b52e503b-0081-43d2-9963-d324df36de42") ) (embedded_fonts no) @@ -17121,7 +19381,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -17144,6 +19404,18 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/682f47f8-b6d3-4bad-afff-5029f9fe5818") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" "11" "12" "13" "14" "15" + "16" "17" "18" "19" "20" + ) + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -17313,7 +19585,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "BATLED1") + (net "/BATLED1") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "c508b45b-9815-4027-a17b-bac5abc53a5c") ) (pad "2" thru_hole circle @@ -17322,7 +19596,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "BATLED2") + (net "/BATLED2") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "7f1b953e-a5ad-400a-9943-6ec75f5967ea") ) (pad "3" thru_hole circle @@ -17331,7 +19607,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "BATLED3") + (net "/BATLED3") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "5df77af4-d698-400e-b3b3-cd75cf13733a") ) (pad "4" thru_hole circle @@ -17340,7 +19618,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "BATLED4") + (net "/BATLED4") + (pinfunction "Pin_4_4") + (pintype "passive") (uuid "a2046746-3a52-4f57-9828-bc0dbf5d97e5") ) (pad "5" thru_hole circle @@ -17349,7 +19629,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "CHRG_EN") + (net "/CHRG_EN") + (pinfunction "Pin_5_5") + (pintype "passive") (uuid "733d53e0-c4cc-4974-881a-106cfe16feb3") ) (pad "6" thru_hole circle @@ -17358,7 +19640,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "USART1_TX") + (net "/USART1_TX") + (pinfunction "Pin_6_6") + (pintype "passive") (uuid "42578eb7-cc62-4501-bfee-4ce611f5129f") ) (pad "7" thru_hole circle @@ -17368,6 +19652,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "USART1_RX") + (pinfunction "Pin_7_7") + (pintype "passive") (uuid "87032ae6-3eb9-49df-a893-50efb8bd0b01") ) (pad "8" thru_hole circle @@ -17377,6 +19663,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J2-Pin_8-Pad8)") + (pinfunction "Pin_8_8") + (pintype "passive+no_connect") (uuid "bf1248a5-9374-47f2-a383-ac1bb95869ff") ) (pad "9" thru_hole circle @@ -17386,6 +19674,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J2-Pin_9-Pad9)") + (pinfunction "Pin_9_9") + (pintype "passive+no_connect") (uuid "aa6f36af-50e9-4f89-a34a-46084abb0b45") ) (pad "10" thru_hole circle @@ -17395,6 +19685,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J2-Pin_10-Pad10)") + (pinfunction "Pin_10_10") + (pintype "passive+no_connect") (uuid "51115ec3-386e-47d1-83dc-38232ca645d3") ) (pad "11" thru_hole circle @@ -17403,7 +19695,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "CHRG_STAT") + (net "/CHRG_STAT") + (pinfunction "Pin_11_11") + (pintype "passive") (uuid "eb061090-e39c-42e1-b01d-cf822f1e7040") ) (pad "12" thru_hole circle @@ -17412,7 +19706,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "CHRG_FAULT") + (net "/CHRG_FAULT") + (pinfunction "Pin_12_12") + (pintype "passive") (uuid "0114e93c-39cb-4252-a437-671cacad81ef") ) (pad "13" thru_hole circle @@ -17421,7 +19717,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "BYP_CTRL") + (net "/BYP_CTRL") + (pinfunction "Pin_13_13") + (pintype "passive") (uuid "88b8493e-ebd5-45de-b042-c19ea28af408") ) (pad "14" thru_hole circle @@ -17430,7 +19728,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "I2C_SCL") + (net "/I2C_SCL") + (pinfunction "Pin_14_14") + (pintype "passive") (uuid "ab411932-539b-4161-bd7d-9644163b9f21") ) (pad "15" thru_hole circle @@ -17439,7 +19739,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "I2C_SDA") + (net "/I2C_SDA") + (pinfunction "Pin_15_15") + (pintype "passive") (uuid "1ad41030-3def-48bf-940b-2f55a6f9e3f4") ) (pad "16" thru_hole circle @@ -17449,6 +19751,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J2-Pin_16-Pad16)") + (pinfunction "Pin_16_16") + (pintype "passive+no_connect") (uuid "806748c7-d036-4428-8749-e6ecd5c44eef") ) (pad "17" thru_hole circle @@ -17458,6 +19762,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(J2-Pin_17-Pad17)") + (pinfunction "Pin_17_17") + (pintype "passive+no_connect") (uuid "0a815090-8516-49e0-8041-0a8dd2d0cf49") ) (pad "18" thru_hole circle @@ -17466,7 +19772,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "SYS5V") + (net "/SYS5V") + (pinfunction "Pin_18_18") + (pintype "passive") (uuid "885c8dea-fc6e-4b0e-acbd-6c7d1a0d71b4") ) (pad "19" thru_hole circle @@ -17476,6 +19784,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_19_19") + (pintype "passive") (uuid "926b56dd-080f-4325-a856-1c84a69364db") ) (pad "20" thru_hole circle @@ -17485,6 +19795,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "3V3") + (pinfunction "Pin_20_20") + (pintype "passive") (uuid "4849cf1c-dd73-4f2a-928e-f87436d825b2") ) (embedded_fonts no) @@ -17528,7 +19840,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -17562,6 +19874,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/ba279427-e263-4e1a-bc40-eb53d15e0a19") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -17622,7 +19944,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CHRG_EN") + (net "/CHRG_EN") + (pintype "passive") (uuid "1bea380f-e88e-42eb-a6e3-675320c9e8d7") ) (pad "2" smd roundrect @@ -17631,6 +19954,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "b4de8f4f-bf47-4599-bf39-a499473872da") ) (embedded_fonts no) @@ -17685,7 +20009,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Unpolarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -17708,6 +20032,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/9a18e923-895d-4049-9293-bd63a498d076") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -17769,6 +20103,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "24V") + (pintype "passive") (uuid "7e7dac3f-3bd4-4634-bb53-42140ebf5af7") ) (pad "2" smd roundrect @@ -17777,6 +20112,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "e834041a-b825-48a7-bea4-86d498125022") ) (embedded_fonts no) @@ -17820,7 +20156,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -17854,6 +20190,16 @@ ) ) ) + (property ki_fp_filters "CP_*") + (path "/9688e92f-c4ae-4d8b-bdfe-7d030099e199") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -18203,7 +20549,8 @@ (size 3.5 1.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.15625) - (net "3V3_MODEM") + (net "/3V3_MODEM") + (pintype "passive") (uuid "b3980aea-f28b-4fc8-ac44-363841ba89a2") ) (pad "2" smd roundrect @@ -18212,6 +20559,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.15625) (net "GND") + (pintype "passive") (uuid "50096541-906b-431b-ab67-43ca89de5b89") ) (embedded_fonts no) @@ -18620,7 +20968,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -18654,6 +21002,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/c1d0504b-470e-487d-9478-5ab80a6e85c9") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -18714,7 +21072,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BYP_CTRL") + (net "/BYP_CTRL") + (pintype "passive") (uuid "7405af1c-ef26-4565-9d2c-51534f3fd230") ) (pad "2" smd roundrect @@ -18722,7 +21081,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "Q6_BASE") + (net "/Q6_BASE") + (pintype "passive") (uuid "a2a754c6-22ae-4959-88e0-b82e5213dd34") ) (embedded_fonts no) @@ -18766,7 +21126,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -18800,6 +21160,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/131ec47b-3806-4b39-bf9d-4a4b0e45a839") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -18861,6 +21231,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "f5198a00-696a-4b5e-b598-1fee68271d25") ) (pad "2" smd roundrect @@ -18868,7 +21239,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "NTC_TEMP") + (net "/NTC_TEMP") + (pintype "passive") (uuid "d7982598-18a2-4c2b-8f40-0ced607583a1") ) (embedded_fonts no) @@ -18887,32 +21259,32 @@ (footprint "MountingHole:MountingHole_3.2mm" (layer "F.Cu") (uuid "9d5b20e7-97d1-409e-b575-c8375726f12e") - (at 85.19165 45.3231) + (at 85.19165 45.3231 180) (property "Reference" "MH1" - (at 0 0 0) + (at -0.10835 -3.8769 0) (layer "F.SilkS") - (uuid "3b591173-7016-45d0-b6df-3cfa7d12f065") + (uuid "d653db2e-c49b-49a3-ac3d-ba149fdbf81f") (effects (font (size 1.27 1.27) ) ) ) - (property "Value" "MountingHole_3.2mm" + (property "Value" "MH1_3.2mm" (at 0 0 0) (layer "F.Fab") - (uuid "effd0886-4bd8-424f-8a15-def46b18d44f") + (uuid "68f0b322-d9f3-4883-8c9e-5a2b1042d935") (effects (font (size 1.27 1.27) ) ) ) - (property "Datasheet" "" + (property "Datasheet" "r" (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "5f963c9a-448b-4325-9291-a371212c3891") + (uuid "b200db09-be25-4122-8e8c-030121622481") (effects (font (size 1.27 1.27) @@ -18923,7 +21295,7 @@ (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "4b446f5b-7cb4-437a-93de-8e202a454e3c") + (uuid "a4d3ebe9-a017-4aac-88f3-f00a311b914a") (effects (font (size 1.27 1.27) @@ -18932,7 +21304,7 @@ ) (duplicate_pad_numbers_are_jumpers no) (pad "" np_thru_hole circle - (at 0 0) + (at 0 0 180) (size 6 6) (drill 3.2) (layers "*.Mask") @@ -18968,7 +21340,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -19002,6 +21374,17 @@ ) ) ) + (path "/16aae149-871a-4c14-938f-9da627a3251c") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "19" "18" "10" "2" "3" "17" "4" "5" "12" "13" "14" "8" "9" "20" + "11" "25" "6" "7" "15" "1" "24" "21" "22" "23" "16" + ) + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -19366,7 +21749,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "VSYS_1") + (pintype "power_in") (uuid "ffc808dd-5e3d-422f-b80d-e01ebef8fb9a") ) (pad "2" smd roundrect @@ -19374,7 +21759,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PROG") + (net "/PROG") + (pinfunction "PROG_2") + (pintype "passive") (uuid "1f1a7b35-c9a8-4774-bd9b-a0872145d184") ) (pad "3" smd roundrect @@ -19382,7 +21769,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CLPROG_TP") + (net "/CLPROG_TP") + (pinfunction "CLPROG_3") + (pintype "passive") (uuid "5e05dca8-362f-4ee1-9abe-a9b5943a83da") ) (pad "4" smd roundrect @@ -19390,7 +21779,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CHRG_EN") + (net "/CHRG_EN") + (pinfunction "CHGOFF_4") + (pintype "input") (uuid "a3b66d33-14b2-4f94-9b9d-a846e51445ba") ) (pad "5" smd roundrect @@ -19399,6 +21790,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pinfunction "BSTOFF_5") + (pintype "input") (uuid "b83229a2-d1ca-4a1e-98ad-9bc4ca52113a") ) (pad "6" smd roundrect @@ -19406,7 +21799,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pinfunction "VIN_6") + (pintype "power_in") (uuid "3ff7973a-45b6-423e-bd6a-c8ef060bede6") ) (pad "7" smd roundrect @@ -19414,7 +21809,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VIN_SW") + (net "/VIN_SW") + (pinfunction "CLN_7") + (pintype "passive") (uuid "e4e53910-efc8-493a-89c4-80ea8b7a6fb1") ) (pad "8" smd roundrect @@ -19422,7 +21819,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CHRG_STAT") + (net "/CHRG_STAT") + (pinfunction "CHRG_8") + (pintype "open_collector") (uuid "163b929d-31f4-4263-8606-f60705b25855") ) (pad "9" smd roundrect @@ -19430,7 +21829,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CHRG_FAULT") + (net "/CHRG_FAULT") + (pinfunction "FAULT_9") + (pintype "open_collector") (uuid "9c60206c-9c65-41e1-b1f9-207619f55705") ) (pad "10" smd roundrect @@ -19438,7 +21839,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VFB_BST") + (net "/VFB_BST") + (pinfunction "RSTFB_10") + (pintype "input") (uuid "b172740b-910f-411b-818c-70cfd0e8a8a6") ) (pad "11" smd roundrect @@ -19447,6 +21850,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "unconnected-(U6-RST-Pad11)") + (pinfunction "RST_11") + (pintype "open_collector+no_connect") (uuid "dbe76e74-8f3a-486a-976e-703dfdd3e056") ) (pad "12" smd roundrect @@ -19454,7 +21859,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "F2_SEL") + (net "/F2_SEL") + (pinfunction "F2_12") + (pintype "input") (uuid "2f311ab1-23b5-423c-9bac-7e3b03e0e38c") ) (pad "13" smd roundrect @@ -19462,7 +21869,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "F1_SEL") + (net "/F1_SEL") + (pinfunction "F1_13") + (pintype "input") (uuid "08e34e65-78ff-4021-a659-00a475436a63") ) (pad "14" smd roundrect @@ -19470,7 +21879,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "F0_SEL") + (net "/F0_SEL") + (pinfunction "F0_14") + (pintype "input") (uuid "de007b87-8dc6-4995-9334-54e4f492e1e4") ) (pad "15" smd roundrect @@ -19478,7 +21889,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "IGATE") + (net "/IGATE") + (pinfunction "IGATE_15") + (pintype "output") (uuid "bd74a06c-04f1-4b9b-bda4-01264daaa7d9") ) (pad "16" smd roundrect @@ -19486,7 +21899,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pinfunction "OVSNS_16") + (pintype "input") (uuid "dd2470ec-7187-4b3c-987c-c9705aafc6d1") ) (pad "17" smd roundrect @@ -19494,7 +21909,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "NTC") + (net "/NTC") + (pinfunction "NTC_17") + (pintype "input") (uuid "5f3582a2-6712-4953-bed0-6f0e3fff7a30") ) (pad "18" smd roundrect @@ -19502,7 +21919,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VFB_BST") + (net "/VFB_BST") + (pinfunction "BSTFB_18") + (pintype "input") (uuid "26148677-cb8d-4602-83b5-5d3075619a18") ) (pad "19" smd roundrect @@ -19510,7 +21929,9 @@ (size 0.85 0.25) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PFI") + (net "/PFI") + (pinfunction "PFI_19") + (pintype "input") (uuid "e99640d6-7c64-4bfd-9f35-da363c4eed99") ) (pad "20" smd roundrect @@ -19518,7 +21939,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PFO_TP") + (net "/PFO_TP") + (pinfunction "PFO_20") + (pintype "open_collector") (uuid "422a2331-89d3-4003-a147-934245a43c63") ) (pad "21" smd roundrect @@ -19526,7 +21949,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_BAT") + (net "/SW_BAT") + (pinfunction "SW_21") + (pintype "passive") (uuid "9e83b6ca-2788-4bd4-8eff-65bfb118f8ed") ) (pad "22" smd roundrect @@ -19534,7 +21959,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SW_BAT") + (net "/SW_BAT") + (pinfunction "SW_22") + (pintype "passive") (uuid "4b0f3fb4-455e-4593-a71c-cdae5ea86cf4") ) (pad "23" smd roundrect @@ -19542,7 +21969,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BAT_PLUS") + (net "/BAT_PLUS") + (pinfunction "BAT_23") + (pintype "passive") (uuid "2588f0a9-785f-4aa5-85da-a1a1a0db52a7") ) (pad "24" smd roundrect @@ -19550,7 +21979,9 @@ (size 0.25 0.85) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "VSYS_24") + (pintype "passive") (uuid "1184845a-1363-4036-abba-725861c806bb") ) (pad "25" smd rect @@ -19559,6 +21990,8 @@ (property pad_prop_heatsink) (layers "F.Cu" "F.Mask") (net "GND") + (pinfunction "GND_EP_25") + (pintype "power_in") (zone_connect 2) (uuid "5a7d5705-498a-407e-a16a-28729e20d0ea") ) @@ -19603,7 +22036,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -19629,8 +22062,18 @@ ) ) ) + (property ki_fp_filters "SolderJumper*Bridged12*") + (path "/f39526a1-e8cb-47dc-b882-e1ccf7b86bc1") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (zone_connect 1) - (attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges) + (attr allow_soldermask_bridges) (net_tie_pad_groups "1,2") (duplicate_pad_numbers_are_jumpers no) (fp_poly @@ -19815,6 +22258,8 @@ (size 1 0.5) (layers "F.Cu" "F.Mask") (net "GND") + (pinfunction "A_1") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -19848,14 +22293,18 @@ (at 0 0) (size 1 1.5) (layers "F.Cu" "F.Mask") - (net "F1_SEL") + (net "/F1_SEL") + (pinfunction "C_2") + (pintype "passive") (uuid "4a3b4e3b-f8db-48f0-887a-37d300aa0b32") ) (pad "3" smd custom (at 1.3 0) (size 1 0.5) (layers "F.Cu" "F.Mask") - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "B_3") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -19926,7 +22375,7 @@ ) ) ) - (property "Description" "" + (property "Description" "P-MOSFET transistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -19949,6 +22398,15 @@ ) ) ) + (path "/fcb3721a-452e-4292-9c5f-019bc1366485") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "G" "D" "S") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -20168,7 +22626,7 @@ (size 6.4 5.8) (layers "F.Cu" "F.Mask") (roundrect_rratio 0.043103) - (net "24V_IN") + (net "/24V_IN") (uuid "4ef9b168-1824-433f-84a5-efd95f5d8dda") ) (pad "3" smd roundrect @@ -20220,7 +22678,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -20254,6 +22712,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/eab7bcbc-d8ec-43b0-a61b-f87ad1a01e1d") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -20314,7 +22782,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "MAIN5V") + (net "/MAIN5V") + (pintype "passive") (uuid "ee6570d8-80f5-4a2e-8493-5fb8122cb60d") ) (pad "2" smd roundrect @@ -20322,7 +22791,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VFB_BST") + (net "/VFB_BST") + (pintype "passive") (uuid "e13957b8-4434-4908-b856-67b3827f88a9") ) (embedded_fonts no) @@ -20366,7 +22836,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -20400,6 +22870,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/831000c2-b4f9-4b2f-8564-21f7be1c9ff6") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -20460,7 +22940,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pintype "passive") (uuid "c55d4017-70b9-46a8-a1b3-9ff8aa0a1410") ) (pad "2" smd roundrect @@ -20468,7 +22949,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PFI") + (net "/PFI") + (pintype "passive") (uuid "8ae14e86-4f65-45e3-81cc-a5446966e54a") ) (embedded_fonts no) @@ -20523,7 +23005,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Polarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -20546,6 +23028,16 @@ ) ) ) + (property ki_fp_filters "CP_*") + (path "/032bb60c-39d3-410d-b1a3-b6c34ea80865") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -20896,6 +23388,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.15625) (net "24V") + (pintype "passive") (uuid "62be3f14-743f-41ef-8267-7c9fb83f74db") ) (pad "2" smd roundrect @@ -20904,6 +23397,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.15625) (net "GND") + (pintype "passive") (uuid "6fcef026-e51d-4a60-bc11-93fee25874a0") ) (embedded_fonts no) @@ -20947,7 +23441,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -20981,6 +23475,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/2203d370-f0cc-42ae-b42b-28ad8770a675") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -21041,7 +23545,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "COMP3") + (net "/COMP3") + (pintype "passive") (uuid "09a31072-3438-48fe-a505-67b391cb28df") ) (pad "2" smd roundrect @@ -21049,7 +23554,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "COMP3_C") + (net "/COMP3_C") + (pintype "passive") (uuid "db81e062-3f51-4006-bf15-9d6df336c160") ) (embedded_fonts no) @@ -21093,7 +23599,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -21119,6 +23625,15 @@ ) ) ) + (path "/0cf79638-84d8-4469-95d8-2d92bcbca615") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -21359,7 +23874,9 @@ (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "NRST") + (net "/NRST") + (pinfunction "1_1") + (pintype "passive") (uuid "1e7257fe-288b-488d-bee8-4b4fafa6dc6f") ) (pad "1" thru_hole circle @@ -21368,7 +23885,9 @@ (drill 1.1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "NRST") + (net "/NRST") + (pinfunction "1_1") + (pintype "passive") (uuid "839a5ed2-bd5b-421a-9037-4a19f05bd58f") ) (pad "2" thru_hole circle @@ -21378,6 +23897,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "2_2") + (pintype "passive") (uuid "ce7d3b73-bf5d-4dfd-bfbc-49bf9506e2de") ) (pad "2" thru_hole circle @@ -21387,6 +23908,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "2_2") + (pintype "passive") (uuid "ae3951dd-b287-4e78-b30f-e6d7b2200ad1") ) (embedded_fonts no) @@ -21430,7 +23953,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -21464,6 +23987,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/d6d1b9c4-4f06-4bee-a9ea-e870fac42bb7") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -21525,6 +24058,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "2fba3e7b-6c85-4154-aade-41bb3fa5d539") ) (pad "2" smd roundrect @@ -21532,7 +24066,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CHRG_FAULT") + (net "/CHRG_FAULT") + (pintype "passive") (uuid "47cfcf5c-e83d-49e7-b391-74325c343cce") ) (embedded_fonts no) @@ -21722,7 +24257,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -21756,6 +24291,15 @@ ) ) ) + (path "/83cef213-db41-49ab-b0c9-3658f572f6b4") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -22028,7 +24572,9 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "Q6_BASE") + (net "/Q6_BASE") + (pinfunction "B_1") + (pintype "input") (uuid "6a32a27a-759f-4661-9364-11371efd345d") ) (pad "2" smd roundrect @@ -22036,7 +24582,9 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "GND") + (net "/KCOIL") + (pinfunction "C_2") + (pintype "passive") (uuid "61231f02-ac30-4e24-b5c7-e38fa94d1752") ) (pad "3" smd roundrect @@ -22044,7 +24592,9 @@ (size 1.475 0.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "KCOIL") + (net "GND") + (pinfunction "E_3") + (pintype "passive") (uuid "81dadd0b-e46a-4989-9e46-8948ef2ae16e") ) (embedded_fonts no) @@ -22088,7 +24638,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -22122,6 +24672,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/5ea4a987-16dc-4456-9ee8-0ab1e9b6b8d9") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -22182,7 +24742,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pintype "passive") (uuid "22c53a88-4ca7-4462-8c8f-e29214ea37fd") ) (pad "2" smd roundrect @@ -22191,6 +24752,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "0d566121-45db-4113-9af8-4c5d02bc4f65") ) (embedded_fonts no) @@ -22234,7 +24796,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -22268,6 +24830,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/04642c30-c969-4c1c-88c9-a65a8dc698f5") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -22328,7 +24900,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "FB_FAN") + (net "/FB_FAN") + (pintype "passive") (uuid "77f3f95a-354e-4db8-81c8-4ca9b3e722f5") ) (pad "2" smd roundrect @@ -22337,6 +24910,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "4054f0d1-a982-4f90-9cbd-a318c7b48b15") ) (embedded_fonts no) @@ -22380,7 +24954,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -22414,6 +24988,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/389ffbbb-c267-48d2-9dbe-7e9224e9dd56") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -22474,7 +25058,8 @@ (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pintype "passive") (uuid "c8b8cc68-80a8-4758-8f1c-5478c5a75d67") ) (pad "2" smd roundrect @@ -22483,6 +25068,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "796ce1cd-7e77-4d22-b60a-f2653a9d5795") ) (embedded_fonts no) @@ -22537,7 +25123,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -22560,6 +25146,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/2555dc13-0a4b-40c0-a5d5-394402530817") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -22620,7 +25216,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VEH5V") + (net "/VEH5V") + (pintype "passive") (uuid "0e447781-baf3-45fa-b4cc-a9e8746d903b") ) (pad "2" smd roundrect @@ -22628,7 +25225,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "5V_SENSE") + (net "/5V_SENSE") + (pintype "passive") (uuid "89f6cdbe-8902-4e61-869b-213de49f20aa") ) (embedded_fonts no) @@ -22651,9 +25249,9 @@ (descr "SMD capacitor, aluminum electrolytic, Nichicon, 6.3x7.7mm") (tags "capacitor electrolytic") (property "Reference" "C3" - (at 0 -4.35 90) + (at 4.5731 2.40835 90) (layer "F.SilkS") - (uuid "9bff94f8-8b09-4b77-b888-fd6de71af23c") + (uuid "8116ee6a-0c0d-4153-8e0d-ae64743c84eb") (effects (font (size 1 1) @@ -22664,7 +25262,7 @@ (property "Value" "47uF" (at 0 4.35 90) (layer "F.Fab") - (uuid "9b654f0c-b3e9-4e25-ba2f-41294e733299") + (uuid "b750acfc-cf95-458e-9851-90156666df28") (effects (font (size 1 1) @@ -22676,18 +25274,18 @@ (at 0 0 90) (layer "F.Fab") (hide yes) - (uuid "cc96e4ca-dadc-40e1-af2d-32e0ad24f996") + (uuid "6a51c14b-cd27-4b44-bb2d-e00eb0b538b6") (effects (font (size 1.27 1.27) ) ) ) - (property "Description" "" + (property "Description" "Polarized capacitor" (at 0 0 90) (layer "F.Fab") (hide yes) - (uuid "4b1a3448-84e4-4da5-8b1f-fcb23b315713") + (uuid "693b7ce5-bb44-4100-8d4b-27dd81217d9e") (effects (font (size 1.27 1.27) @@ -22706,6 +25304,16 @@ ) ) ) + (property ki_fp_filters "CP_*") + (path "/26539809-7cfd-4de1-8c82-d80d68723457") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -23055,7 +25663,8 @@ (size 3.5 1.6) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.15625) - (net "SW_5V") + (net "/SW_5V") + (pintype "passive") (uuid "d16ed17d-383e-4810-bc62-be3412ead347") ) (pad "2" smd roundrect @@ -23064,6 +25673,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.15625) (net "GND") + (pintype "passive") (uuid "151e9a93-d937-4f26-9b3f-50270840150e") ) (embedded_fonts no) @@ -23120,7 +25730,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Schottky diode" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -23133,6 +25743,16 @@ ) ) ) + (property ki_fp_filters "TO-???* *_Diode_* *SingleDiode* D_*") + (path "/40072bf4-acbb-4d2d-b7b7-58c48263c3ca") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -23332,6 +25952,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pinfunction "K_1") + (pintype "passive") (uuid "db92eb53-099a-420e-85c8-8d590ecea9f4") ) (pad "2" smd roundrect @@ -23340,6 +25962,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "IGN_SENSE") + (pinfunction "A_2") + (pintype "passive") (uuid "51848afe-7ffd-41b5-b748-13dcefcaead0") ) (embedded_fonts no) @@ -23383,7 +26007,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -23417,6 +26041,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/95d6f1dc-cd21-4c63-88eb-43997f376c58") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -23477,7 +26111,8 @@ (size 1.15 2.7) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.217391) - (net "MAIN5V") + (net "/MAIN5V") + (pintype "passive") (uuid "6c27b663-0659-4157-9678-ff20fdaed795") ) (pad "2" smd roundrect @@ -23486,6 +26121,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.217391) (net "GND") + (pintype "passive") (uuid "dee72700-fd64-4d9b-a2a9-5efc1c60ff1a") ) (embedded_fonts no) @@ -23664,7 +26300,7 @@ ) ) ) - (property "Value" "RTK2B-UART1" + (property "Value" "RTK2B-UART1 (DNP — harness alt)" (at 3.75 4.6 90) (layer "F.Fab") (uuid "e85e00de-3955-4645-b6a5-71b1487cb437") @@ -23686,7 +26322,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 90) (layer "F.Fab") (hide yes) @@ -23709,6 +26345,16 @@ ) ) ) + (property ki_fp_filters "Connector*:*_1x??_*") + (path "/cc81530d-c86e-43aa-816b-51b6b5004aa6") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3" "4") + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -23895,7 +26541,9 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (roundrect_rratio 0.147059) - (net "SW_5V") + (net "/SW_5V") + (pinfunction "Pin_1_1") + (pintype "passive") (uuid "4b662980-5314-4b01-a6c7-173a2786c57d") ) (pad "2" thru_hole oval @@ -23905,6 +26553,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "Pin_2_2") + (pintype "passive") (uuid "a5743d1f-b2db-40c1-b425-0c3b03797db9") ) (pad "3" thru_hole oval @@ -23913,7 +26563,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "GNSS_TX") + (net "/GNSS_TX") + (pinfunction "Pin_3_3") + (pintype "passive") (uuid "772bf3ad-2b8f-47f9-86b4-7dd9968c6cb7") ) (pad "4" thru_hole oval @@ -23922,7 +26574,9 @@ (drill 0.95) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "GNSS_RX") + (net "/GNSS_RX") + (pinfunction "Pin_4_4") + (pintype "passive") (uuid "7dab03e3-a1d8-4f30-8def-4e65006942e8") ) (embedded_fonts no) @@ -24112,7 +26766,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -24146,6 +26800,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/0f1ec93e-fae5-4fbf-af4f-341677378909") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -24206,7 +26870,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BATLED1") + (net "/BATLED1") + (pintype "passive") (uuid "4d13ce1a-70bb-44bd-abf6-f45c190164d2") ) (pad "2" smd roundrect @@ -24214,7 +26879,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BLED1") + (net "/BLED1") + (pintype "passive") (uuid "096692ce-a66a-491d-aae3-a54ca5cd0ce6") ) (embedded_fonts no) @@ -24258,7 +26924,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -24292,6 +26958,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/ce46626d-3f8d-41c0-b5b3-38f5530498d6") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -24353,6 +27029,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "24V") + (pintype "passive") (uuid "c5ecacde-bc42-4e29-bc86-7f86ee1d3605") ) (pad "2" smd roundrect @@ -24360,7 +27037,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "EN_FAN") + (net "/EN_FAN") + (pintype "passive") (uuid "a0b5d659-2651-498e-8315-bb9d545ffe29") ) (embedded_fonts no) @@ -24415,7 +27093,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Unpolarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -24438,6 +27116,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/4454568d-6ad4-4db9-9fd7-af20e889d813") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -24498,7 +27186,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "BAT_SENSE") + (net "/BAT_SENSE") + (pintype "passive") (uuid "13970b28-3a68-46be-9acb-9829e3b39568") ) (pad "2" smd roundrect @@ -24507,6 +27196,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "818f8bef-3b53-4ef8-b9f5-9e9ed3183776") ) (embedded_fonts no) @@ -24561,7 +27251,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Resistor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -24584,6 +27274,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/4318cfbd-8e36-4d4a-ba69-a56aadf25e99") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -24644,7 +27344,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "5V_SENSE") + (net "/5V_SENSE") + (pintype "passive") (uuid "b7e6c16c-a000-4a5a-9653-5e83c456b0ba") ) (pad "2" smd roundrect @@ -24653,6 +27354,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "5c1643af-c1a2-45b4-a998-e14443aa8abd") ) (embedded_fonts no) @@ -24696,7 +27398,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -24730,6 +27432,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/907c321b-1359-48d9-9bc5-c810c15c679a") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -24790,7 +27502,8 @@ (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "NTC_TEMP") + (net "/NTC_TEMP") + (pintype "passive") (uuid "7f61d1f1-a79a-456d-a110-42786bb205f1") ) (pad "2" smd roundrect @@ -24799,6 +27512,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "bb87a4cc-87b4-4c10-916b-c4d57e7df0cc") ) (embedded_fonts no) @@ -24842,7 +27556,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -24876,6 +27590,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/fda4b39a-4b1b-4dc2-b68e-50dd67534ea6") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -24936,7 +27660,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "VFB_BST") + (net "/VFB_BST") + (pintype "passive") (uuid "7663a4b5-f08b-4d23-899c-6b474c53d02b") ) (pad "2" smd roundrect @@ -24945,6 +27670,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "680c6b98-0930-4ccc-8bf8-087bcb670a8b") ) (embedded_fonts no) @@ -24988,7 +27714,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -25022,6 +27748,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/da626e8e-77eb-4f25-8765-1171ab4de91b") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -25083,6 +27819,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "8828eceb-5813-4446-b5b9-c19b919ebb74") ) (pad "2" smd roundrect @@ -25090,7 +27827,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "CHRG_STAT") + (net "/CHRG_STAT") + (pintype "passive") (uuid "aeaeb7b5-d992-4dcd-ad94-da1005fbeb8b") ) (embedded_fonts no) @@ -25134,7 +27872,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -25168,6 +27906,16 @@ ) ) ) + (property ki_fp_filters "R_*") + (path "/a9649caf-296a-41fb-84ff-3416052a44e2") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -25228,7 +27976,8 @@ (size 0.8 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "PROG") + (net "/PROG") + (pintype "passive") (uuid "22c91aac-2b49-411d-a31d-343943d1f101") ) (pad "2" smd roundrect @@ -25237,6 +27986,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "9838f363-1632-41e5-a867-c20f980485bc") ) (embedded_fonts no) @@ -25280,7 +28030,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -25306,6 +28056,16 @@ ) ) ) + (property ki_fp_filters "TO-???* *_Diode_* *SingleDiode* D_*") + (path "/f616d9e5-ead0-479d-a3d0-aef7be989dd2") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -25494,7 +28254,9 @@ (size 2.5 1.8) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.1388888889) - (net "SW3_NODE") + (net "/SW3_NODE") + (pinfunction "K_1") + (pintype "passive") (uuid "94425dcd-7ffc-4cef-93e8-08087db7f612") ) (pad "2" smd roundrect @@ -25503,6 +28265,8 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.1388888889) (net "GND") + (pinfunction "A_2") + (pintype "passive") (uuid "ac7ec411-7efe-4bad-b50f-cdf724b016dc") ) (embedded_fonts no) @@ -25546,7 +28310,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -25572,7 +28336,16 @@ ) ) ) - (attr exclude_from_pos_files exclude_from_bom) + (property ki_fp_filters "Pin* Test*") + (path "/2f417faa-03ba-4977-8cf6-fb3531d8037e") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1") + ) + ) (duplicate_pad_numbers_are_jumpers no) (fp_circle (center 0 0) @@ -25611,7 +28384,9 @@ (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net "PFO_TP") + (net "/PFO_TP") + (pinfunction "1_1") + (pintype "passive") (uuid "296423ed-be62-4549-83a6-0afa0563bfb6") ) (embedded_fonts no) @@ -25655,7 +28430,7 @@ ) ) ) - (property "Description" "" + (property "Description" "Unpolarized capacitor" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -25678,6 +28453,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/4b458d84-9f80-48dc-b175-ff5cf6385908") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -25739,6 +28524,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "3V3") + (pintype "passive") (uuid "e4449e02-9297-43d7-9eaa-5539752c6460") ) (pad "2" smd roundrect @@ -25747,6 +28533,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "8c9c9a43-9981-4d34-a90e-bafd9f0a1f32") ) (embedded_fonts no) @@ -25790,7 +28577,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (layer "F.Fab") (hide yes) @@ -25824,6 +28611,16 @@ ) ) ) + (property ki_fp_filters "C_*") + (path "/267d7d8a-6cef-4b23-a846-aee05a175862") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -25884,7 +28681,8 @@ (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "5V_FAN") + (net "/5V_FAN") + (pintype "passive") (uuid "a389bf02-8f45-4f7d-880b-45d601990c44") ) (pad "2" smd roundrect @@ -25893,6 +28691,7 @@ (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) (net "GND") + (pintype "passive") (uuid "a16c8c57-1cc5-4d7e-8f3d-a9d0c5409d38") ) (embedded_fonts no) @@ -25936,7 +28735,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -25962,8 +28761,18 @@ ) ) ) + (property ki_fp_filters "SolderJumper*Bridged12*") + (path "/0a50686b-a5ef-4002-9672-2f7df90f8d4e") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2" "3") + ) + ) (zone_connect 1) - (attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges) + (attr allow_soldermask_bridges) (net_tie_pad_groups "1,2") (duplicate_pad_numbers_are_jumpers no) (fp_poly @@ -26147,7 +28956,9 @@ (at -1.3 0) (size 1 0.5) (layers "F.Cu" "F.Mask") - (net "MAIN5V") + (net "/MAIN5V") + (pinfunction "A_1") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -26181,7 +28992,9 @@ (at 0 0) (size 1 1.5) (layers "F.Cu" "F.Mask") - (net "F2_SEL") + (net "/F2_SEL") + (pinfunction "C_2") + (pintype "passive") (uuid "8d3db3b9-3866-4e8d-900d-c89b739edfee") ) (pad "3" smd custom @@ -26189,6 +29002,8 @@ (size 1 0.5) (layers "F.Cu" "F.Mask") (net "GND") + (pinfunction "B_3") + (pintype "passive") (zone_connect 2) (thermal_bridge_angle 45) (options @@ -26248,7 +29063,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 180) (unlocked yes) (layer "F.Fab") @@ -26274,6 +29089,15 @@ ) ) ) + (path "/f1652b1f-7436-46f5-b5fb-3a326d04df21") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -26472,7 +29296,9 @@ (size 0.9 1.2) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "SYS5V") + (net "/SYS5V") + (pinfunction "K_1") + (pintype "passive") (uuid "6f50d233-1b7e-4d5b-82c2-880c966eb945") ) (pad "2" smd roundrect @@ -26480,7 +29306,9 @@ (size 0.9 1.2) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) - (net "KCOIL") + (net "/KCOIL") + (pinfunction "A_2") + (pintype "passive") (uuid "58e3580f-86d3-4b95-accd-5ebb839b51da") ) (embedded_fonts no) @@ -26496,6 +29324,214 @@ ) ) ) + (footprint "LED_SMD:LED_0805_2012Metric" + (layer "F.Cu") + (uuid "fde7a55d-b917-4bc3-9dbf-a6a70db82853") + (at 203.1 92.1) + (descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)") + (tags "LED") + (property "Reference" "D4G" + (at -0.2 -1.8 0) + (layer "F.SilkS") + (uuid "a5a40012-2031-4996-b1fe-9a3896b975b8") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "LED" + (at 0 1.65 0) + (layer "F.Fab") + (uuid "c34a0249-e3e1-4789-9a53-24c87b5e4a23") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7476f1a7-38c3-46f3-b18d-c7f76530cda4") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e79df47c-7997-437e-a361-47bee0469b69") + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "KiLib_Generator" "SMD_2terminal_chip_molded" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "5cf22d8b-524c-42ef-91b0-ca96952b4a3c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property ki_fp_filters "LED* LED_SMD:* LED_THT:*") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -1.685 -0.96) + (end -1.685 0.96) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "cd948cf6-87cd-4147-ab3c-981fa2fb4bd2") + ) + (fp_line + (start -1.685 0.96) + (end 1 0.96) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6fca3c54-63fa-45d6-9468-56de01673cd7") + ) + (fp_line + (start 1 -0.96) + (end -1.685 -0.96) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e55a9c21-591f-48a2-99a0-e4fa00222568") + ) + (fp_rect + (start -1.68 -0.95) + (end 1.68 0.95) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "f849a4c5-3063-4c06-9efa-b87c55d44c35") + ) + (fp_line + (start -1 -0.3) + (end -1 0.6) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d919641c-01da-400b-9e00-c2318eb47df0") + ) + (fp_line + (start -1 0.6) + (end 1 0.6) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "2368d6a2-e2d2-4b7e-9d50-f109d91d7ac8") + ) + (fp_line + (start -0.7 -0.6) + (end -1 -0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "950be70d-74d4-497c-b387-e26a944238a9") + ) + (fp_line + (start 1 -0.6) + (end -0.7 -0.6) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "81e3ab7b-1893-4dfb-a162-8c043d83bf5b") + ) + (fp_line + (start 1 0.6) + (end 1 -0.6) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "fc8ce28c-6dfe-421e-92e8-69e96fe83056") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "01524f83-73cc-4cf7-961e-26032e8a37d0") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.9375 0) + (size 0.975 1.4) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "GND") + (pinfunction "K_1") + (pintype "passive") + (uuid "3751cce8-0ece-4547-8de7-aa6bb2c59829") + ) + (pad "2" smd roundrect + (at 0.9375 0) + (size 0.975 1.4) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/MODEM_LED_A") + (pinfunction "A_2") + (pintype "passive") + (uuid "155ede47-f899-4b1f-96ec-1525e32c435a") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" (layer "F.Cu") (uuid "feb71a86-130c-4322-b224-76cab90f6c0e") @@ -26524,7 +29560,7 @@ ) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 0) (unlocked yes) (layer "F.Fab") @@ -26550,6 +29586,15 @@ ) ) ) + (path "/18e5d833-2591-464b-8ee3-fdf6d0f722a9") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "1" "2") + ) + ) (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -26748,14 +29793,18 @@ (at -3.9 0) (size 2 3.2) (layers "F.Cu" "F.Mask" "F.Paste") - (net "SW3_NODE") + (net "/SW3_NODE") + (pinfunction "1_1") + (pintype "passive") (uuid "cbe62425-b2a1-4a0a-b82a-72aa8434220c") ) (pad "2" smd rect (at 3.9 0) (size 2 3.2) (layers "F.Cu" "F.Mask" "F.Paste") - (net "3V3_MODEM") + (net "/3V3_MODEM") + (pinfunction "2_2") + (pintype "passive") (uuid "e135fbee-7a11-48d9-99b4-30a14872595f") ) (embedded_fonts no) @@ -26789,7 +29838,7 @@ (justify mirror) ) ) - (property "Value" "simpleRTK2B-Pro-socket" + (property "Value" "simpleRTK2B-Pro on UNO female headers" (at 0 -22.86 180) (layer "B.Fab") (uuid "53436c98-be59-4dd9-b1bb-8cca6c487a16") @@ -26801,7 +29850,7 @@ (justify mirror) ) ) - (property "Datasheet" "" + (property "Datasheet" "~" (at 0 0 180) (unlocked yes) (layer "B.Fab") @@ -26829,6 +29878,18 @@ (justify mirror) ) ) + (path "/721d3ef5-4772-4593-94bc-7276ca640d83") + (sheetname "/") + (sheetfile "hbox-watchdog-v3-PROD.kicad_sch") + (units + (unit + (name "A") + (pins "15" "16" "17" "23" "31" "32" "30" "18" "19" "20" "21" "22" "24" + "25" "26" "27" "28" "5" "8" "4" "2" "3" "6" "7" "29" "9" "10" "11" "12" + "13" "14" "1" + ) + ) + ) (attr through_hole) (duplicate_pad_numbers_are_jumpers no) (fp_line @@ -27360,6 +30421,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-NC-Pad1)") + (pinfunction "NC_1") + (pintype "passive+no_connect") (uuid "356cb8ba-4c2f-4764-8710-9d3c1702592d") ) (pad "2" thru_hole oval @@ -27369,6 +30432,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "3V3") + (pinfunction "IOREF_2") + (pintype "input") (uuid "f512a18e-39a6-4418-b04f-fffbb7627683") ) (pad "3" thru_hole oval @@ -27378,6 +30443,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-RESET-Pad3)") + (pinfunction "RESET_3") + (pintype "passive+no_connect") (uuid "16e7baa4-96df-4bf4-98b5-fea7b6d9e7cd") ) (pad "4" thru_hole oval @@ -27387,6 +30454,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-3V3_OUT-Pad4)") + (pinfunction "3V3_OUT_4") + (pintype "passive+no_connect") (uuid "cb13e783-835d-4182-b3fd-41601d35a960") ) (pad "5" thru_hole oval @@ -27395,7 +30464,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "SW_5V") + (net "/SW_5V") + (pinfunction "5V_5") + (pintype "power_in") (uuid "6760e011-b03a-4cc2-99df-cd12ae970bc8") ) (pad "6" thru_hole oval @@ -27405,6 +30476,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "GND_6") + (pintype "power_in") (uuid "e193ebfb-4b82-480b-839f-3b47bfc26ab5") ) (pad "7" thru_hole oval @@ -27414,6 +30487,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "GND_7") + (pintype "passive") (uuid "7160ce07-ab3c-4854-b9ee-1bbf5b2a0027") ) (pad "8" thru_hole oval @@ -27423,6 +30498,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-VIN-Pad8)") + (pinfunction "VIN_8") + (pintype "passive+no_connect") (uuid "f8fb5bed-3422-4509-b69f-8f5c75ddd670") ) (pad "9" thru_hole oval @@ -27432,6 +30509,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-A0-Pad9)") + (pinfunction "A0_9") + (pintype "passive+no_connect") (uuid "2a024f11-5325-45a3-abaf-5e0aca45213a") ) (pad "10" thru_hole oval @@ -27441,6 +30520,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-A1-Pad10)") + (pinfunction "A1_10") + (pintype "passive+no_connect") (uuid "6df7c19f-aa93-4cc3-a521-069727bcaf2a") ) (pad "11" thru_hole oval @@ -27450,6 +30531,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-A2-Pad11)") + (pinfunction "A2_11") + (pintype "passive+no_connect") (uuid "db5c4740-8dd8-46d8-a80e-e960feb1ec05") ) (pad "12" thru_hole oval @@ -27459,6 +30542,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-A3-Pad12)") + (pinfunction "A3_12") + (pintype "passive+no_connect") (uuid "f6fb3858-7a7c-4440-803d-f62c9de64024") ) (pad "13" thru_hole oval @@ -27468,6 +30553,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-A4-Pad13)") + (pinfunction "A4_13") + (pintype "passive+no_connect") (uuid "9d1e14b4-6b1f-44bf-925c-264a45c6532c") ) (pad "14" thru_hole oval @@ -27477,6 +30564,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-A5-Pad14)") + (pinfunction "A5_14") + (pintype "passive+no_connect") (uuid "6e58bf63-e49d-4b8e-b2e6-5c9c1f06a2e3") ) (pad "15" thru_hole oval @@ -27485,7 +30574,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "GNSS_RX") + (net "/GNSS_RX") + (pinfunction "TX1_D0_15") + (pintype "output") (uuid "351c4a35-7b3a-46a4-bbe7-80bb0554ef4f") ) (pad "16" thru_hole oval @@ -27494,7 +30585,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "GNSS_TX") + (net "/GNSS_TX") + (pinfunction "RX1_D1_16") + (pintype "input") (uuid "0399b157-0c64-4e02-bbb0-a0e0b451bc16") ) (pad "17" thru_hole oval @@ -27503,7 +30596,9 @@ (drill 1) (layers "*.Cu" "*.Mask") (remove_unused_layers no) - (net "DOUT_4G") + (net "/DOUT_4G") + (pinfunction "RX2_D2_17") + (pintype "input") (uuid "38324185-88fa-4b25-9a87-e520d687b596") ) (pad "18" thru_hole oval @@ -27513,6 +30608,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D3-Pad18)") + (pinfunction "D3_18") + (pintype "passive+no_connect") (uuid "77749b56-b308-4c49-94d0-006bb08fc366") ) (pad "19" thru_hole oval @@ -27522,6 +30619,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D4-Pad19)") + (pinfunction "D4_19") + (pintype "passive+no_connect") (uuid "ab5acbe3-eaea-49b7-833b-5df05d1b2df9") ) (pad "20" thru_hole oval @@ -27531,6 +30630,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D5-Pad20)") + (pinfunction "D5_20") + (pintype "passive+no_connect") (uuid "d3088ec2-f309-4958-b22d-992456ff75b7") ) (pad "21" thru_hole oval @@ -27540,6 +30641,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D6-Pad21)") + (pinfunction "D6_21") + (pintype "passive+no_connect") (uuid "6deae7ea-9937-4e21-85ef-bc136966827d") ) (pad "22" thru_hole oval @@ -27549,6 +30652,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D7-Pad22)") + (pinfunction "D7_22") + (pintype "passive+no_connect") (uuid "1ce00ffd-41ac-4410-8aed-21ab9891fa67") ) (pad "23" thru_hole oval @@ -27558,6 +30663,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "USART1_RX") + (pinfunction "TX2_D8_23") + (pintype "output") (uuid "010ee5b7-975d-4c1d-a5db-661245377c7a") ) (pad "24" thru_hole oval @@ -27567,6 +30674,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D9-Pad24)") + (pinfunction "D9_24") + (pintype "passive+no_connect") (uuid "f92d9c7a-5848-41ce-a6ef-4144b40a68ab") ) (pad "25" thru_hole oval @@ -27576,6 +30685,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-D10-Pad25)") + (pinfunction "D10_25") + (pintype "passive+no_connect") (uuid "2e0eea17-682e-48c0-a9ef-a2367baf97e6") ) (pad "26" thru_hole oval @@ -27585,6 +30696,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-FENCE_D11-Pad26)") + (pinfunction "FENCE_D11_26") + (pintype "passive+no_connect") (uuid "fc651bea-6c81-4287-bfe7-b76cd476846c") ) (pad "27" thru_hole oval @@ -27594,6 +30707,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-EXTINT_D12-Pad27)") + (pinfunction "EXTINT_D12_27") + (pintype "passive+no_connect") (uuid "c5af3e0a-ab1a-4f39-99ea-d8a5465c0668") ) (pad "28" thru_hole oval @@ -27603,6 +30718,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-TPS_D13-Pad28)") + (pinfunction "TPS_D13_28") + (pintype "passive+no_connect") (uuid "d7efdaa2-3823-42d0-a79c-3086138bdea9") ) (pad "29" thru_hole oval @@ -27612,6 +30729,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "GND") + (pinfunction "GND_29") + (pintype "passive") (uuid "1410f160-7648-4249-a9c0-42f1dbe7e5aa") ) (pad "30" thru_hole oval @@ -27621,6 +30740,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-AREF-Pad30)") + (pinfunction "AREF_30") + (pintype "passive+no_connect") (uuid "36b1b7e4-0fb9-4669-9808-b0798336e4dc") ) (pad "31" thru_hole oval @@ -27630,6 +30751,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-SDA-Pad31)") + (pinfunction "SDA_31") + (pintype "passive+no_connect") (uuid "dff76628-add9-4634-8d18-ba500e30e8a8") ) (pad "32" thru_hole oval @@ -27639,6 +30762,8 @@ (layers "*.Cu" "*.Mask") (remove_unused_layers no) (net "unconnected-(MOD1-SCL-Pad32)") + (pinfunction "SCL_32") + (pintype "passive+no_connect") (uuid "daacb527-e0c7-42f3-b0ed-af25a0b40477") ) (embedded_fonts no) @@ -27701,7 +30826,7 @@ ) (gr_poly (pts - (xy 104.660687 134.907166) (xy 103.730667 134.907166) (xy 103.730667 130.301371) (xy 104.660687 130.301371) + (xy 103.463815 136.958569) (xy 102.679372 136.958569) (xy 102.679372 133.073724) (xy 103.463815 133.073724) ) (stroke (width 0) @@ -27713,11 +30838,11 @@ ) (gr_poly (pts - (xy 97.441983 132.227825) (xy 97.464128 132.249975) (xy 98.903434 132.249975) (xy 98.925581 132.227825) - (xy 98.925581 130.478513) (xy 99.877738 130.478513) (xy 99.899881 130.500664) (xy 99.899881 134.907166) - (xy 98.925581 134.907166) (xy 98.925581 133.157848) (xy 98.881293 133.113556) (xy 97.508415 133.113556) - (xy 97.441983 133.179991) (xy 97.441983 134.907166) (xy 96.467686 134.907166) (xy 96.467686 130.500664) - (xy 96.489828 130.478513) (xy 97.441983 130.478513) + (xy 97.375065 134.69863) (xy 97.393742 134.717314) (xy 98.607755 134.717314) (xy 98.626433 134.69863) + (xy 98.626433 133.223141) (xy 99.42955 133.223141) (xy 99.448224 133.241827) (xy 99.448224 136.958569) + (xy 98.626433 136.958569) (xy 98.626433 135.483078) (xy 98.589075 135.445712) (xy 97.431097 135.445712) + (xy 97.375065 135.501753) (xy 97.375065 136.958569) (xy 96.553274 136.958569) (xy 96.553274 133.241827) + (xy 96.571949 133.223141) (xy 97.375065 133.223141) ) (stroke (width 0) @@ -27729,15 +30854,15 @@ ) (gr_poly (pts - (xy 94.364072 131.807113) (xy 94.386213 132.117118) (xy 94.408355 132.139258) (xy 94.408355 132.692843) - (xy 94.297642 133.202136) (xy 94.142639 133.490001) (xy 93.921203 133.733572) (xy 93.766202 133.844287) - (xy 93.566913 133.93286) (xy 93.23476 133.93286) (xy 92.969044 133.822143) (xy 92.814046 133.667146) - (xy 92.725467 133.490001) (xy 92.703331 133.379284) (xy 92.703331 133.202136) (xy 93.14619 133.202136) - (xy 93.14619 133.379284) (xy 93.256906 133.512142) (xy 93.47834 133.534282) (xy 93.566913 133.490001) - (xy 93.854777 133.179991) (xy 93.987634 132.869987) (xy 94.009776 132.559976) (xy 93.987634 132.537844) - (xy 93.411911 132.914274) (xy 93.190474 133.113556) (xy 93.14619 133.202136) (xy 92.703331 133.202136) - (xy 92.703331 133.179991) (xy 92.791897 132.936418) (xy 93.101907 132.626417) (xy 93.14619 132.626417) - (xy 93.456194 132.404977) (xy 93.47834 132.360691) (xy 93.522628 132.360691) (xy 94.319784 131.740683) + (xy 94.778942 134.343775) (xy 94.797618 134.605251) (xy 94.816295 134.623926) (xy 94.816295 135.090853) + (xy 94.722909 135.52043) (xy 94.592174 135.763233) (xy 94.405396 135.968676) (xy 94.274651 136.062061) + (xy 94.106564 136.136776) (xy 93.826404 136.136776) (xy 93.602281 136.043388) (xy 93.471545 135.912655) + (xy 93.396831 135.763233) (xy 93.378156 135.66985) (xy 93.378156 135.52043) (xy 93.751692 135.52043) + (xy 93.751692 135.66985) (xy 93.845079 135.78191) (xy 94.031852 135.800585) (xy 94.106564 135.763233) + (xy 94.349367 135.501753) (xy 94.461426 135.240275) (xy 94.480104 134.978789) (xy 94.461426 134.960124) + (xy 93.975823 135.277626) (xy 93.789049 135.445712) (xy 93.751692 135.52043) (xy 93.378156 135.52043) + (xy 93.378156 135.501753) (xy 93.452857 135.296307) (xy 93.714345 135.034831) (xy 93.751692 135.034831) + (xy 94.013174 134.848052) (xy 94.031852 134.810694) (xy 94.06921 134.810694) (xy 94.741583 134.28774) ) (stroke (width 0) @@ -27749,16 +30874,16 @@ ) (gr_poly (pts - (xy 90.422569 132.161403) (xy 90.843294 132.427122) (xy 91.175435 132.692843) (xy 91.219728 132.692843) - (xy 91.419016 132.914274) (xy 91.507588 133.113556) (xy 91.507588 133.423575) (xy 91.396877 133.645004) - (xy 91.241863 133.8) (xy 90.909723 133.93286) (xy 90.577576 133.910717) (xy 90.267572 133.733572) - (xy 90.046137 133.467855) (xy 89.913277 133.202136) (xy 89.824701 132.847843) (xy 89.811785 132.537844) - (xy 90.20113 132.537844) (xy 90.20113 132.692843) (xy 90.223284 132.714982) (xy 90.223284 132.825701) - (xy 90.289716 133.047132) (xy 90.400426 133.246423) (xy 90.621862 133.467855) (xy 90.710432 133.512142) - (xy 90.865431 133.534282) (xy 90.931863 133.512142) (xy 91.064727 133.379284) (xy 91.064727 133.157848) - (xy 91.042579 133.113556) (xy 90.799002 132.892131) (xy 90.223284 132.515696) (xy 90.20113 132.537844) - (xy 89.811785 132.537844) (xy 89.802558 132.316402) (xy 89.824701 132.294264) (xy 89.824701 131.962117) - (xy 89.846844 131.939968) (xy 89.868988 131.71854) (xy 89.913277 131.71854) + (xy 91.454403 134.642604) (xy 91.809274 134.866728) (xy 92.089422 135.090853) (xy 92.126785 135.090853) + (xy 92.294879 135.277626) (xy 92.369582 135.445712) (xy 92.369582 135.707206) (xy 92.276201 135.893978) + (xy 92.145455 136.024711) (xy 91.865301 136.136776) (xy 91.585148 136.118096) (xy 91.323667 135.968676) + (xy 91.136895 135.744559) (xy 91.024835 135.52043) (xy 90.950119 135.221594) (xy 90.939229 134.960124) + (xy 91.267628 134.960124) (xy 91.267628 135.090853) (xy 91.286315 135.109529) (xy 91.286315 135.202919) + (xy 91.34235 135.389689) (xy 91.435725 135.557784) (xy 91.622501 135.744559) (xy 91.69721 135.78191) + (xy 91.827944 135.800585) (xy 91.883976 135.78191) (xy 91.996049 135.66985) (xy 91.996049 135.483078) + (xy 91.977363 135.445712) (xy 91.771917 135.258954) (xy 91.286315 134.941441) (xy 91.267628 134.960124) + (xy 90.939229 134.960124) (xy 90.931446 134.773337) (xy 90.950119 134.754664) (xy 90.950119 134.474509) + (xy 90.968801 134.455836) (xy 90.987476 134.26906) (xy 91.024835 134.26906) ) (stroke (width 0) @@ -27770,17 +30895,17 @@ ) (gr_poly (pts - (xy 114.470148 132.205687) (xy 114.735861 132.360691) (xy 114.868729 132.493552) (xy 115.02373 132.781413) - (xy 115.068015 133.002848) (xy 115.068015 134.907166) (xy 114.137995 134.907166) (xy 114.137995 133.268566) - (xy 114.049428 133.047132) (xy 113.894419 132.892131) (xy 113.761567 132.825701) (xy 113.650844 132.825701) - (xy 113.62871 132.803557) (xy 113.407272 132.847843) (xy 113.274411 132.936418) (xy 113.097267 133.135704) - (xy 113.05298 133.268566) (xy 113.05298 134.907166) (xy 112.122959 134.907166) (xy 112.100823 134.885025) - (xy 112.100823 133.467855) (xy 112.122959 133.357136) (xy 112.100823 133.246423) (xy 112.122959 133.157848) - (xy 112.100823 133.091424) (xy 112.122959 133.069276) (xy 112.122959 132.936418) (xy 112.100823 132.914274) - (xy 112.100823 132.759269) (xy 112.122959 132.737126) (xy 112.100823 132.537844) (xy 112.122959 132.427122) - (xy 112.100823 132.404977) (xy 112.100823 132.227825) (xy 112.122959 132.161403) (xy 113.008691 132.161403) - (xy 113.05298 132.205687) (xy 113.05298 132.449264) (xy 113.075124 132.471409) (xy 113.318696 132.249975) - (xy 113.540128 132.139258) (xy 113.71728 132.094973) (xy 114.049428 132.094973) + (xy 111.737789 134.679957) (xy 111.961913 134.810694) (xy 112.073984 134.922758) (xy 112.204726 135.165561) + (xy 112.242075 135.352337) (xy 112.242075 136.958569) (xy 111.457629 136.958569) (xy 111.457629 135.576461) + (xy 111.382926 135.389689) (xy 111.252183 135.258954) (xy 111.140129 135.202919) (xy 111.046732 135.202919) + (xy 111.028064 135.184242) (xy 110.841287 135.221594) (xy 110.729229 135.296307) (xy 110.579811 135.464395) + (xy 110.542454 135.576461) (xy 110.542454 136.958569) (xy 109.758015 136.958569) (xy 109.739336 136.939891) + (xy 109.739336 135.744559) (xy 109.758015 135.651172) (xy 109.739336 135.557784) (xy 109.758015 135.483078) + (xy 109.739336 135.427047) (xy 109.758015 135.408364) (xy 109.758015 135.296307) (xy 109.739336 135.277626) + (xy 109.739336 135.146882) (xy 109.758015 135.12821) (xy 109.739336 134.960124) (xy 109.758015 134.866728) + (xy 109.739336 134.848052) (xy 109.739336 134.69863) (xy 109.758015 134.642604) (xy 110.505098 134.642604) + (xy 110.542454 134.679957) (xy 110.542454 134.885406) (xy 110.561127 134.904083) (xy 110.766581 134.717314) + (xy 110.953352 134.623926) (xy 111.102772 134.58657) (xy 111.382926 134.58657) ) (stroke (width 0) @@ -27792,21 +30917,21 @@ ) (gr_poly (pts - (xy 110.462221 132.117118) (xy 110.705794 132.139258) (xy 110.949364 132.227825) (xy 111.170808 132.360691) - (xy 111.325808 132.493552) (xy 111.525093 132.759269) (xy 111.613667 132.958557) (xy 111.6801 133.202136) - (xy 111.702241 133.645004) (xy 111.6801 133.667146) (xy 109.687202 133.667146) (xy 109.665063 133.689283) - (xy 109.687202 133.866432) (xy 109.753637 133.999288) (xy 109.952916 134.17644) (xy 110.107928 134.220727) - (xy 110.152214 134.265011) (xy 110.484361 134.265011) (xy 110.528646 134.220727) (xy 110.705794 134.17644) - (xy 110.993653 133.955004) (xy 111.591532 134.265011) (xy 111.635813 134.3093) (xy 111.48081 134.53073) - (xy 111.148651 134.77431) (xy 110.772222 134.929311) (xy 110.55079 134.973594) (xy 109.952916 134.973594) - (xy 109.576492 134.862881) (xy 109.288626 134.685731) (xy 108.912192 134.3093) (xy 108.912192 134.265011) - (xy 108.757184 133.955004) (xy 108.73505 133.733572) (xy 108.712906 133.711432) (xy 108.712906 133.379284) - (xy 108.77933 133.069276) (xy 108.79114 133.047132) (xy 109.709348 133.047132) (xy 109.731491 133.157848) - (xy 110.772222 133.157848) (xy 110.794368 133.135704) (xy 110.750085 132.980701) (xy 110.683651 132.892131) - (xy 110.506504 132.737126) (xy 110.373648 132.692843) (xy 110.130071 132.692843) (xy 109.975069 132.737126) - (xy 109.797917 132.892131) (xy 109.709348 133.047132) (xy 108.79114 133.047132) (xy 108.956485 132.737126) - (xy 109.266484 132.404977) (xy 109.465771 132.272116) (xy 109.709348 132.161403) (xy 110.019355 132.094973) - (xy 110.440078 132.094973) + (xy 108.357233 134.605251) (xy 108.562671 134.623926) (xy 108.768121 134.69863) (xy 108.954899 134.810694) + (xy 109.085637 134.922758) (xy 109.253732 135.146882) (xy 109.328435 135.314983) (xy 109.384474 135.52043) + (xy 109.403146 135.893978) (xy 109.384474 135.912655) (xy 107.703527 135.912655) (xy 107.684852 135.931327) + (xy 107.703527 136.080742) (xy 107.759564 136.192802) (xy 107.92765 136.342221) (xy 108.058396 136.379579) + (xy 108.095754 136.416931) (xy 108.375903 136.416931) (xy 108.413261 136.379579) (xy 108.562671 136.342221) + (xy 108.805477 136.155451) (xy 109.309767 136.416931) (xy 109.347119 136.454291) (xy 109.216381 136.641059) + (xy 108.936211 136.846511) (xy 108.618703 136.97725) (xy 108.431933 137.014602) (xy 107.92765 137.014602) + (xy 107.610144 136.921217) (xy 107.367339 136.771798) (xy 107.049829 136.454291) (xy 107.049829 136.416931) + (xy 106.919087 136.155451) (xy 106.900419 135.968676) (xy 106.88174 135.95) (xy 106.88174 135.66985) + (xy 106.937767 135.408364) (xy 106.947721 135.389689) (xy 107.722203 135.389689) (xy 107.740881 135.483078) + (xy 108.618703 135.483078) (xy 108.637389 135.464395) (xy 108.600035 135.333658) (xy 108.544 135.258954) + (xy 108.394584 135.12821) (xy 108.282521 135.090853) (xy 108.077073 135.090853) (xy 107.946336 135.12821) + (xy 107.796908 135.258954) (xy 107.722203 135.389689) (xy 106.947721 135.389689) (xy 107.087188 135.12821) + (xy 107.348665 134.848052) (xy 107.516754 134.735986) (xy 107.722203 134.642604) (xy 107.983684 134.58657) + (xy 108.338556 134.58657) ) (stroke (width 0) @@ -27818,23 +30943,23 @@ ) (gr_poly (pts - (xy 102.379926 132.161403) (xy 102.66779 132.294264) (xy 102.822792 132.404977) (xy 103.022084 132.604268) - (xy 103.199228 132.914274) (xy 103.265654 133.157848) (xy 103.287806 133.667146) (xy 101.317054 133.667146) - (xy 101.294909 133.689283) (xy 101.294909 133.822143) (xy 101.383482 134.021437) (xy 101.538487 134.15429) - (xy 101.671347 134.220727) (xy 101.737779 134.220727) (xy 101.78206 134.265011) (xy 102.092063 134.265011) - (xy 102.136352 134.220727) (xy 102.202786 134.220727) (xy 102.379926 134.110007) (xy 102.424218 134.110007) - (xy 102.579222 133.955004) (xy 102.645649 133.999288) (xy 102.712078 133.999288) (xy 102.977796 134.15429) - (xy 103.022084 134.15429) (xy 103.199228 134.265011) (xy 103.221372 134.331441) (xy 103.132802 134.464296) - (xy 102.93351 134.663584) (xy 102.778508 134.77431) (xy 102.40207 134.929311) (xy 102.158496 134.951452) - (xy 102.136352 134.973594) (xy 101.582774 134.973594) (xy 101.560631 134.951452) (xy 101.449916 134.951452) - (xy 101.294909 134.885025) (xy 101.228476 134.885025) (xy 100.940615 134.73002) (xy 100.608472 134.420013) - (xy 100.409178 134.06572) (xy 100.342754 133.8) (xy 100.320613 133.512142) (xy 100.342754 133.490001) - (xy 100.364896 133.179991) (xy 100.418036 133.047132) (xy 101.317054 133.047132) (xy 101.339195 133.157848) - (xy 102.357792 133.157848) (xy 102.379926 133.135704) (xy 102.379926 133.047132) (xy 102.313504 132.914274) - (xy 102.158496 132.759269) (xy 101.981356 132.692843) (xy 101.715636 132.692843) (xy 101.538487 132.759269) - (xy 101.427772 132.847843) (xy 101.317054 133.047132) (xy 100.418036 133.047132) (xy 100.49775 132.847843) - (xy 100.674901 132.604268) (xy 100.940615 132.360691) (xy 101.16205 132.227825) (xy 101.405624 132.139258) - (xy 101.627059 132.094973) (xy 102.069922 132.094973) + (xy 101.540064 134.642604) (xy 101.782871 134.754664) (xy 101.91361 134.848052) (xy 102.081704 135.016147) + (xy 102.231119 135.277626) (xy 102.287149 135.483078) (xy 102.305834 135.912655) (xy 100.643568 135.912655) + (xy 100.624889 135.931327) (xy 100.624889 136.043388) (xy 100.699598 136.211487) (xy 100.830337 136.323541) + (xy 100.942401 136.379579) (xy 100.998435 136.379579) (xy 101.035792 136.416931) (xy 101.297265 136.416931) + (xy 101.334616 136.379579) (xy 101.39065 136.379579) (xy 101.540064 136.286189) (xy 101.577426 136.286189) + (xy 101.708163 136.155451) (xy 101.764195 136.192802) (xy 101.820222 136.192802) (xy 102.044349 136.323541) + (xy 102.081704 136.323541) (xy 102.231119 136.416931) (xy 102.249799 136.472964) (xy 102.175095 136.585022) + (xy 102.006996 136.753118) (xy 101.876257 136.846511) (xy 101.558745 136.97725) (xy 101.353294 136.995925) + (xy 101.334616 137.014602) (xy 100.867685 137.014602) (xy 100.849015 136.995925) (xy 100.755632 136.995925) + (xy 100.624889 136.939891) (xy 100.568858 136.939891) (xy 100.326051 136.809154) (xy 100.045899 136.547676) + (xy 99.877799 136.248834) (xy 99.821775 136.024711) (xy 99.803099 135.78191) (xy 99.821775 135.763233) + (xy 99.840449 135.501753) (xy 99.885269 135.389689) (xy 100.643568 135.389689) (xy 100.662238 135.483078) + (xy 101.52139 135.483078) (xy 101.540064 135.464395) (xy 101.540064 135.389689) (xy 101.48404 135.277626) + (xy 101.353294 135.146882) (xy 101.203883 135.090853) (xy 100.979758 135.090853) (xy 100.830337 135.146882) + (xy 100.736954 135.221594) (xy 100.643568 135.389689) (xy 99.885269 135.389689) (xy 99.952508 135.221594) + (xy 100.101929 135.016147) (xy 100.326051 134.810694) (xy 100.512822 134.69863) (xy 100.718274 134.623926) + (xy 100.905046 134.58657) (xy 101.278589 134.58657) ) (stroke (width 0) @@ -27846,26 +30971,25 @@ ) (gr_poly (pts - (xy 106.631432 132.117118) (xy 106.764294 132.117118) (xy 107.030011 132.205687) (xy 107.317872 132.404977) - (xy 107.34002 132.382834) (xy 107.362162 132.161403) (xy 108.247894 132.161403) (xy 108.29218 132.205687) - (xy 108.29218 135.195029) (xy 108.203608 135.571464) (xy 108.048604 135.837184) (xy 107.827173 136.058613) - (xy 107.495027 136.257905) (xy 107.09644 136.368619) (xy 106.941441 136.368619) (xy 106.919291 136.390762) - (xy 106.387855 136.390762) (xy 106.365715 136.368619) (xy 106.1 136.346474) (xy 105.856421 136.257905) - (xy 105.789989 136.257905) (xy 105.524274 136.102907) (xy 105.302845 135.881465) (xy 105.214264 135.748611) - (xy 105.169987 135.615751) (xy 105.214264 135.571464) (xy 105.34712 135.527179) (xy 105.856421 135.261452) - (xy 105.922849 135.261452) (xy 106.12214 135.46075) (xy 106.387855 135.571464) (xy 106.764294 135.593608) - (xy 106.941441 135.549322) (xy 107.162868 135.416463) (xy 107.273588 135.283596) (xy 107.34002 135.128601) - (xy 107.34002 134.77431) (xy 107.317872 134.752166) (xy 107.251453 134.77431) (xy 107.140731 134.862881) - (xy 106.764294 134.973594) (xy 106.210712 134.973594) (xy 105.922849 134.907166) (xy 105.612845 134.73002) - (xy 105.369267 134.486445) (xy 105.169987 134.132152) (xy 105.10355 133.888575) (xy 105.10355 133.733572) - (xy 105.059261 133.711432) (xy 105.059261 133.512142) (xy 106.055714 133.512142) (xy 106.1 133.8) - (xy 106.166432 133.93286) (xy 106.387855 134.132152) (xy 106.609291 134.198581) (xy 106.941441 134.17644) - (xy 107.140731 134.06572) (xy 107.317872 133.844287) (xy 107.362162 133.711432) (xy 107.34002 133.290709) - (xy 107.251453 133.135704) (xy 107.09644 132.980701) (xy 106.897152 132.892131) (xy 106.565005 132.892131) - (xy 106.343573 132.980701) (xy 106.12214 133.224278) (xy 106.055714 133.512142) (xy 105.059261 133.512142) - (xy 105.059261 133.401426) (xy 105.10355 133.357136) (xy 105.125701 133.113556) (xy 105.214264 132.869987) - (xy 105.34712 132.648552) (xy 105.679277 132.316402) (xy 105.856421 132.205687) (xy 106.12214 132.117118) - (xy 106.609291 132.094973) + (xy 105.126078 134.605251) (xy 105.238146 134.605251) (xy 105.462266 134.679957) (xy 105.705072 134.848052) + (xy 105.723753 134.829375) (xy 105.742426 134.642604) (xy 106.489516 134.642604) (xy 106.526866 134.679957) + (xy 106.526866 137.201372) (xy 106.452164 137.518882) (xy 106.321416 137.743011) (xy 106.13465 137.929779) + (xy 105.854494 138.097875) (xy 105.518299 138.191255) (xy 105.387565 138.191255) (xy 105.36888 138.20994) + (xy 104.920629 138.20994) (xy 104.901955 138.191255) (xy 104.67783 138.172583) (xy 104.472379 138.097875) + (xy 104.416352 138.097875) (xy 104.192225 137.967139) (xy 104.005456 137.780364) (xy 103.930742 137.668304) + (xy 103.893393 137.556238) (xy 103.930742 137.518882) (xy 104.0428 137.481529) (xy 104.472379 137.257401) + (xy 104.528412 137.257401) (xy 104.696506 137.425499) (xy 104.920629 137.518882) (xy 105.238146 137.537562) + (xy 105.387565 137.500204) (xy 105.57433 137.388146) (xy 105.667717 137.27608) (xy 105.723753 137.145344) + (xy 105.723753 136.846511) (xy 105.705072 136.827839) (xy 105.649047 136.846511) (xy 105.555652 136.921217) + (xy 105.238146 137.014602) (xy 104.771213 137.014602) (xy 104.528412 136.958569) (xy 104.266929 136.809154) + (xy 104.061482 136.603707) (xy 103.893393 136.304868) (xy 103.837355 136.099416) (xy 103.837355 135.968676) + (xy 103.8 135.95) (xy 103.8 135.78191) (xy 104.640477 135.78191) (xy 104.67783 136.024711) (xy 104.733869 136.136776) + (xy 104.920629 136.304868) (xy 105.1074 136.360902) (xy 105.387565 136.342221) (xy 105.555652 136.248834) + (xy 105.705072 136.062061) (xy 105.742426 135.95) (xy 105.723753 135.595142) (xy 105.649047 135.464395) + (xy 105.518299 135.333658) (xy 105.350204 135.258954) (xy 105.070047 135.258954) (xy 104.883279 135.333658) + (xy 104.696506 135.539108) (xy 104.640477 135.78191) (xy 103.8 135.78191) (xy 103.8 135.688523) (xy 103.837355 135.651172) + (xy 103.856041 135.445712) (xy 103.930742 135.240275) (xy 104.0428 135.053499) (xy 104.322965 134.773337) + (xy 104.472379 134.679957) (xy 104.696506 134.605251) (xy 105.1074 134.58657) ) (stroke (width 0) @@ -27877,39 +31001,39 @@ ) (gr_poly (pts - (xy 92.526182 129.304926) (xy 92.681182 129.304926) (xy 93.301196 129.459926) (xy 93.899063 129.747784) - (xy 94.341928 130.057792) (xy 94.452639 130.168508) (xy 94.519069 130.19065) (xy 94.939791 130.633516) - (xy 94.939791 130.677806) (xy 95.161221 130.965669) (xy 95.404802 131.408534) (xy 95.581949 131.939968) - (xy 95.626242 132.161403) (xy 95.626242 132.316402) (xy 95.648376 132.338545) (xy 95.648376 132.515696) - (xy 95.670522 132.537844) (xy 95.670522 133.047132) (xy 95.648376 133.069276) (xy 95.626242 133.423575) - (xy 95.471236 133.999288) (xy 95.316229 134.353586) (xy 95.161221 134.619302) (xy 94.806938 135.128601) - (xy 94.541215 135.394321) (xy 94.209068 135.660041) (xy 93.854777 135.903616) (xy 93.47834 136.102907) - (xy 92.969044 136.280044) (xy 92.858331 136.280044) (xy 92.614756 136.346474) (xy 92.45975 136.346474) - (xy 92.437607 136.368619) (xy 91.574019 136.346474) (xy 91.219728 136.280044) (xy 90.865431 136.169328) - (xy 90.333999 135.925762) (xy 90.068273 135.726465) (xy 90.001852 135.704326) (xy 89.802558 135.527179) - (xy 89.758271 135.527179) (xy 89.24898 134.995743) (xy 88.938975 134.486445) (xy 88.894688 134.464296) - (xy 88.717538 134.043578) (xy 88.717538 133.977148) (xy 88.673251 133.910717) (xy 88.584679 133.578571) - (xy 88.54039 133.135704) (xy 88.518253 133.113556) (xy 88.525429 132.847843) (xy 88.961113 132.847843) - (xy 88.983254 132.869987) (xy 88.983254 133.157848) (xy 89.005404 133.179991) (xy 89.005404 133.312855) - (xy 89.071838 133.645004) (xy 89.337551 134.331441) (xy 89.625416 134.752166) (xy 90.001852 135.150736) - (xy 90.422569 135.46075) (xy 90.466858 135.46075) (xy 90.666146 135.593608) (xy 91.020441 135.748611) - (xy 91.086864 135.748611) (xy 91.396877 135.859327) (xy 91.662593 135.881465) (xy 91.684731 135.903616) - (xy 92.260454 135.925762) (xy 92.282603 135.903616) (xy 92.481885 135.903616) (xy 92.747616 135.837184) - (xy 92.858331 135.837184) (xy 93.301196 135.682184) (xy 93.655489 135.505033) (xy 93.965491 135.305747) - (xy 94.364072 134.929311) (xy 94.762645 134.442156) (xy 95.072653 133.777862) (xy 95.183369 133.312855) - (xy 95.227664 132.670699) (xy 95.205513 132.648552) (xy 95.183369 132.272116) (xy 95.094794 131.89569) - (xy 94.829081 131.275674) (xy 94.651928 131.009956) (xy 94.541215 130.92138) (xy 94.430502 130.766375) - (xy 94.098354 130.434231) (xy 93.899063 130.279226) (xy 93.854777 130.279226) (xy 93.633347 130.124221) - (xy 93.323338 129.969216) (xy 92.946902 129.836364) (xy 92.526182 129.747784) (xy 92.371178 129.747784) - (xy 92.349034 129.725638) (xy 91.795448 129.725638) (xy 91.773316 129.747784) (xy 91.419016 129.769935) - (xy 91.086864 129.880644) (xy 91.020441 129.880644) (xy 90.533288 130.102078) (xy 90.489001 130.146367) - (xy 90.444716 130.146367) (xy 90.068273 130.41209) (xy 89.603269 130.87709) (xy 89.359693 131.231387) - (xy 89.093971 131.8514) (xy 88.983254 132.404977) (xy 88.961113 132.847843) (xy 88.525429 132.847843) - (xy 88.54039 132.294264) (xy 88.651107 131.762825) (xy 88.73968 131.49711) (xy 88.806115 131.386389) - (xy 88.806115 131.319959) (xy 88.916826 131.098527) (xy 89.005404 131.009956) (xy 89.11612 130.832806) - (xy 89.11612 130.788519) (xy 89.293265 130.544945) (xy 89.758271 130.079936) (xy 89.824701 130.057792) - (xy 90.267572 129.725638) (xy 90.555429 129.570647) (xy 90.954005 129.415635) (xy 91.109013 129.393495) - (xy 91.286156 129.327067) (xy 91.795448 129.282781) (xy 91.817594 129.260638) (xy 92.326884 129.260638) + (xy 93.228736 132.233253) (xy 93.359473 132.233253) (xy 93.882437 132.363993) (xy 94.386719 132.60679) + (xy 94.760264 132.868274) (xy 94.85364 132.96166) (xy 94.909679 132.980337) (xy 95.264543 133.353875) + (xy 95.264543 133.391234) (xy 95.451309 133.634038) (xy 95.65676 134.007581) (xy 95.806182 134.455836) + (xy 95.843545 134.642604) (xy 95.843545 134.773337) (xy 95.86221 134.792014) (xy 95.86221 134.941441) + (xy 95.880892 134.960124) (xy 95.880892 135.389689) (xy 95.86221 135.408364) (xy 95.843545 135.707206) + (xy 95.712799 136.192802) (xy 95.582056 136.491642) (xy 95.451309 136.715768) (xy 95.152481 137.145344) + (xy 94.928354 137.369469) (xy 94.648195 137.593596) (xy 94.349367 137.799046) (xy 94.031852 137.967139) + (xy 93.602281 138.116548) (xy 93.508893 138.116548) (xy 93.303449 138.172583) (xy 93.172703 138.172583) + (xy 93.154023 138.191255) (xy 92.425619 138.172583) (xy 92.126785 138.116548) (xy 91.827944 138.023164) + (xy 91.3797 137.817723) (xy 91.155569 137.649622) (xy 91.099545 137.630951) (xy 90.931446 137.481529) + (xy 90.894094 137.481529) (xy 90.46452 137.033288) (xy 90.203039 136.603707) (xy 90.165685 136.585022) + (xy 90.016264 136.230161) (xy 90.016264 136.174131) (xy 89.978907 136.118096) (xy 89.904202 135.837945) + (xy 89.866846 135.464395) (xy 89.848173 135.445712) (xy 89.854222 135.221594) (xy 90.221713 135.221594) + (xy 90.240387 135.240275) (xy 90.240387 135.483078) (xy 90.259066 135.501753) (xy 90.259066 135.613822) + (xy 90.315108 135.893978) (xy 90.539227 136.472964) (xy 90.782029 136.827839) (xy 91.099545 137.164009) + (xy 91.454403 137.425499) (xy 91.491761 137.425499) (xy 91.659854 137.537562) (xy 91.958697 137.668304) + (xy 92.014717 137.668304) (xy 92.276201 137.761686) (xy 92.500323 137.780364) (xy 92.518998 137.799046) + (xy 93.004606 137.817723) (xy 93.023288 137.799046) (xy 93.191377 137.799046) (xy 93.41551 137.743011) + (xy 93.508893 137.743011) (xy 93.882437 137.612273) (xy 94.181275 137.462853) (xy 94.442748 137.294755) + (xy 94.778942 136.97725) (xy 95.115125 136.566352) (xy 95.376608 136.006032) (xy 95.469989 135.613822) + (xy 95.507353 135.072178) (xy 95.488672 135.053499) (xy 95.469989 134.735986) (xy 95.395282 134.418485) + (xy 95.171161 133.895515) (xy 95.021741 133.671394) (xy 94.928354 133.596682) (xy 94.834975 133.465945) + (xy 94.554817 133.185791) (xy 94.386719 133.055045) (xy 94.349367 133.055045) (xy 94.162597 132.924307) + (xy 93.901114 132.793563) (xy 93.583599 132.681506) (xy 93.228736 132.60679) (xy 93.097996 132.60679) + (xy 93.079318 132.588113) (xy 92.612384 132.588113) (xy 92.593719 132.60679) (xy 92.294879 132.625472) + (xy 92.014717 132.718852) (xy 91.958697 132.718852) (xy 91.547794 132.905632) (xy 91.510437 132.942983) + (xy 91.473085 132.942983) (xy 91.155569 133.167111) (xy 90.763354 133.559325) (xy 90.557902 133.85816) + (xy 90.333771 134.381125) (xy 90.240387 134.848052) (xy 90.221713 135.221594) (xy 89.854222 135.221594) + (xy 89.866846 134.754664) (xy 89.960229 134.30642) (xy 90.034938 134.082295) (xy 90.090976 133.988905) + (xy 90.090976 133.932872) (xy 90.184359 133.746102) (xy 90.259066 133.671394) (xy 90.352459 133.521974) + (xy 90.352459 133.484619) (xy 90.501873 133.279171) (xy 90.894094 132.886954) (xy 90.950119 132.868274) + (xy 91.323667 132.588113) (xy 91.566467 132.457378) (xy 91.902653 132.326634) (xy 92.033399 132.307961) + (xy 92.182816 132.25193) (xy 92.612384 132.214581) (xy 92.631068 132.195896) (xy 93.060636 132.195896) ) (stroke (width 0) @@ -28345,7 +31469,7 @@ ) ) (gr_text "GND" - (at 113.73 79 90) + (at 113.73 79.15 90) (layer "F.SilkS") (uuid "51cccc96-1731-4523-b3c1-b20f6502554b") (effects @@ -28367,7 +31491,7 @@ ) ) (gr_text "NRST" - (at 117.35 53.5 90) + (at 117.35 53.05 90) (layer "F.SilkS") (uuid "548ceb7d-ace4-42de-bbce-425b6f7a381c") (effects @@ -28378,7 +31502,7 @@ ) ) (gr_text "CHEN" - (at 117.35 76.9 90) + (at 117.45 77.4 90) (layer "F.SilkS") (uuid "a29879df-4c3e-485f-b213-d806a8ebde26") (effects @@ -28399,19 +31523,8 @@ ) ) ) - (gr_text "BSNS" - (at 119.89 53.5 90) - (layer "F.SilkS") - (uuid "abbc0052-9a63-4487-8595-d613e0ce0af7") - (effects - (font - (size 0.9 0.9) - (thickness 0.13) - ) - ) - ) (gr_text "U-TX" - (at 119.89 76.9 90) + (at 119.85 77.35 90) (layer "F.SilkS") (uuid "7d4aab1a-a69c-447b-8a39-4bc8c55cb83e") (effects @@ -28421,8 +31534,19 @@ ) ) ) + (gr_text "BSNS" + (at 119.9 52.95 90) + (layer "F.SilkS") + (uuid "abbc0052-9a63-4487-8595-d613e0ce0af7") + (effects + (font + (size 0.9 0.9) + (thickness 0.13) + ) + ) + ) (gr_text "PCTL" - (at 122.43 53.5 90) + (at 122.4 53.1 90) (layer "F.SilkS") (uuid "113e3444-c290-492b-bdef-2a7ba33b47e3") (effects @@ -28433,7 +31557,7 @@ ) ) (gr_text "U-RX" - (at 122.43 76.9 90) + (at 122.4 77.55 90) (layer "F.SilkS") (uuid "8d152d89-4f66-457b-8b71-a32f0b8eaa36") (effects @@ -28444,7 +31568,7 @@ ) ) (gr_text "G-TX" - (at 124.97 53.5 90) + (at 124.97 52.95 90) (layer "F.SilkS") (uuid "a55fcbe6-9bc3-4a85-8b52-02b83959d914") (effects @@ -28466,7 +31590,7 @@ ) ) (gr_text "G-RX" - (at 127.51 53.5 90) + (at 127.55 52.8 90) (layer "F.SilkS") (uuid "f625dc0c-e50a-40cd-8b8f-f280113169c7") (effects @@ -28477,7 +31601,7 @@ ) ) (gr_text "GND" - (at 127.95 131.6 90) + (at 127.95 132.2 90) (layer "F.SilkS") (uuid "6f82928f-d95a-4b61-97ff-2fa36d4a7b75") (effects @@ -28488,7 +31612,7 @@ ) ) (gr_text "U-RX" - (at 128.97 79 90) + (at 128.95 78.35 90) (layer "F.SilkS") (uuid "93b36014-b4c1-41e5-8adc-4b59c78402a1") (effects @@ -28499,7 +31623,7 @@ ) ) (gr_text "5VS" - (at 130.05 53.5 90) + (at 130.05 53.3 90) (layer "F.SilkS") (uuid "0ebe17db-460c-4467-a625-8704324a0a32") (effects @@ -28521,7 +31645,7 @@ ) ) (gr_text "CSTA" - (at 132.59 76.9 90) + (at 132.6 77.45 90) (layer "F.SilkS") (uuid "36253e41-7942-4bf1-81a7-90c415e885d3") (effects @@ -28531,10 +31655,10 @@ ) ) ) - (gr_text "FPWM" - (at 135.13 53.5 90) + (gr_text "CFLT" + (at 135.1 77.45 90) (layer "F.SilkS") - (uuid "3aa86d98-4ba0-43af-a3c9-a6f8cd68559f") + (uuid "69a7a74e-71e1-47c9-ad1c-3b0e7cc032d2") (effects (font (size 0.9 0.9) @@ -28542,10 +31666,10 @@ ) ) ) - (gr_text "CFLT" - (at 135.13 76.9 90) + (gr_text "FPWM" + (at 135.25 52.85 90) (layer "F.SilkS") - (uuid "69a7a74e-71e1-47c9-ad1c-3b0e7cc032d2") + (uuid "3aa86d98-4ba0-43af-a3c9-a6f8cd68559f") (effects (font (size 0.9 0.9) @@ -28565,7 +31689,7 @@ ) ) (gr_text "ELED" - (at 140.21 53.5 90) + (at 140.2 53.2 90) (layer "F.SilkS") (uuid "d39b8c3f-8a02-47df-b64d-6ff773757906") (effects @@ -28675,7 +31799,7 @@ ) ) (gr_text "GND" - (at 152.91 53.5 90) + (at 152.9 59.15 90) (layer "F.SilkS") (uuid "77c30103-b0cd-4d12-b416-739f02ad7ffc") (effects @@ -28696,17 +31820,6 @@ ) ) ) - (gr_text "5V" - (at 155.45 53.5 90) - (layer "F.SilkS") - (uuid "e0c320ae-a801-486f-9ec0-839c5081df39") - (effects - (font - (size 0.9 0.9) - (thickness 0.13) - ) - ) - ) (gr_text "3V3" (at 155.45 76.9 90) (layer "F.SilkS") @@ -28718,8 +31831,19 @@ ) ) ) + (gr_text "5V" + (at 155.55 58.65 90) + (layer "F.SilkS") + (uuid "e0c320ae-a801-486f-9ec0-839c5081df39") + (effects + (font + (size 0.9 0.9) + (thickness 0.13) + ) + ) + ) (gr_text "www.helgen.tech" - (at 106.3 137.35 0) + (at 121.65 136.5 0) (layer "F.SilkS") (uuid "48aa6c18-3a89-4d71-9822-d48bbe24bee4") (effects @@ -28763,7 +31887,7 @@ ) ) (gr_text "EINARBoard HBOX 1.0" - (at 140.99165 136.5231 0) + (at 83.9 97.85 270) (layer "F.SilkS") (uuid "d7ca9227-4e10-4c67-b39e-b8144e397b34") (effects @@ -28773,6 +31897,158 @@ ) ) ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "2a5d4343-bf50-4525-87dc-d448c00f0faa") + (pts + (xy 215.2 44.3) (xy 211.2 45.3) + ) + (height -6.3) + (orientation 0) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "4" + (at 213.2 36.85 0) + (layer "F.CrtYd") + (uuid "2a5d4343-bf50-4525-87dc-d448c00f0faa") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "2bc72407-672a-4899-988e-2d8aeaa62010") + (pts + (xy 212.85 40.35) (xy 211.2 45.35) + ) + (height 5.3) + (orientation 1) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "5" + (at 217 42.85 90) + (layer "F.CrtYd") + (uuid "2bc72407-672a-4899-988e-2d8aeaa62010") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "3416e58f-ad2e-4b48-96a8-b9b1b86f991d") + (pts + (xy 211.2 135.35) (xy 215.2 135.75) + ) + (height 6.05) + (orientation 0) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "4" + (at 213.2 140.25 0) + (layer "F.CrtYd") + (uuid "3416e58f-ad2e-4b48-96a8-b9b1b86f991d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "36dccdd1-1f3c-42cb-a6b2-5924ea34419c") + (pts + (xy 80.2 137.05) (xy 85.2 134.95) + ) + (height 5.5) + (orientation 0) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 2) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "5" + (at 82.9 142.55 0) + (layer "F.CrtYd") + (uuid "36dccdd1-1f3c-42cb-a6b2-5924ea34419c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) (dimension (type orthogonal) (layer "F.CrtYd") @@ -28800,9 +32076,161 @@ (keep_text_aligned yes) ) (gr_text "135" - (at 147.69165 146.8 0) + (at 147.69165 145.8 0) (layer "F.CrtYd") (uuid "5e291806-0883-4139-a56a-82075b151175") + (effects + (font + (size 2 2) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "65e55a8d-a7fb-4818-8dba-9dd315eab36c") + (pts + (xy 84.35 40.3) (xy 84.7 45.3) + ) + (height -6.25) + (orientation 1) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "5" + (at 76.95 42.8 90) + (layer "F.CrtYd") + (uuid "65e55a8d-a7fb-4818-8dba-9dd315eab36c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "7321e284-ad38-4e52-bfd9-0123326ae0ca") + (pts + (xy 80.2 44.55) (xy 85.2 45.5) + ) + (height -5.25) + (orientation 0) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "5" + (at 82.7 38.15 0) + (layer "F.CrtYd") + (uuid "7321e284-ad38-4e52-bfd9-0123326ae0ca") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "871835d7-05d4-4543-8450-e9b4f2c82e41") + (pts + (xy 214.3 140.35) (xy 211.2 135.35) + ) + (height 2.95) + (orientation 1) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "5" + (at 216.1 137.85 90) + (layer "F.CrtYd") + (uuid "871835d7-05d4-4543-8450-e9b4f2c82e41") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + ) + (dimension + (type orthogonal) + (layer "F.CrtYd") + (uuid "9a65f1fc-f22b-43b1-b380-9e232e419f74") + (pts + (xy 85.2 135.35) (xy 85.3 140.35) + ) + (height -7.85) + (orientation 1) + (format + (prefix "") + (suffix "") + (units 3) + (units_format 0) + (precision 4) + (suppress_zeroes yes) + ) + (style + (thickness 0.05) + (arrow_length 1.27) + (text_position_mode 0) + (arrow_direction outward) + (extension_height 0.58642) + (extension_offset 0.5) + (keep_text_aligned yes) + ) + (gr_text "5" + (at 76.2 137.85 90) + (layer "F.CrtYd") + (uuid "9a65f1fc-f22b-43b1-b380-9e232e419f74") (effects (font (size 1 1) @@ -28838,55 +32266,71 @@ (keep_text_aligned yes) ) (gr_text "100" - (at 73.05 90.3 90) + (at 72.05 90.3 90) (layer "F.CrtYd") (uuid "de1f623e-e17a-4ef3-8fa5-a2231e3c1760") (effects (font - (size 1 1) + (size 2 2) (thickness 0.15) ) ) ) ) (segment - (start 154.81485 63.3731) - (end 154.88165 63.3063) + (start 144.5125 61.15) + (end 143.3125 59.95) (width 0.2) (layer "F.Cu") - (net "GATE_LS") - (uuid "87c31160-3320-4444-8e56-c4dbe582ff6d") + (net "/GATE_LS") + (uuid "18291cb1-fd7c-49b8-9e18-18b93b5aac0d") ) (segment - (start 152.36665 64.3231) - (end 147.69165 64.3231) + (start 154.75 63.3731) + (end 146.7356 63.3731) (width 0.2) (layer "F.Cu") - (net "GATE_LS") - (uuid "a4f4f750-172c-406e-a532-bf8eff82ad49") + (net "/GATE_LS") + (uuid "1f729f21-7172-4e4c-8b3c-f645349bc499") ) (segment - (start 153.31665 63.3731) - (end 152.36665 64.3231) + (start 144.51855 61.15) + (end 144.5125 61.15) (width 0.2) (layer "F.Cu") - (net "GATE_LS") - (uuid "b1b508c2-ed2d-4afe-967c-ae7eaeee08de") + (net "/GATE_LS") + (uuid "4e786192-0e12-460d-b027-842a55db0e35") + ) + (segment + (start 143.3125 59.95) + (end 137.7125 59.95) + (width 0.2) + (layer "F.Cu") + (net "/GATE_LS") + (uuid "a539ab82-a1f9-4dd5-b8fb-f4e1e9ee3712") ) (segment (start 166.54165 59.3231) (end 165.73965 58.5211) (width 0.2) (layer "F.Cu") - (net "GATE_LS") + (net "/GATE_LS") (uuid "b1d4f7d9-d9e4-440e-b337-6940b9d4c9c2") ) + (segment + (start 146.7356 63.3731) + (end 144.5125 61.15) + (width 0.2) + (layer "F.Cu") + (net "/GATE_LS") + (uuid "b813b0b8-6175-4f09-9ee8-cd4f9c4d23ca") + ) (segment (start 161.85465 58.5211) (end 160.69355 59.6822) (width 0.2) (layer "F.Cu") - (net "GATE_LS") + (net "/GATE_LS") (uuid "c24e5f9b-5c4e-46e4-b01d-a48af9e01ead") ) (segment @@ -28894,63 +32338,63 @@ (end 161.85465 58.5211) (width 0.2) (layer "F.Cu") - (net "GATE_LS") + (net "/GATE_LS") (uuid "de7a82f5-3290-4f79-8eac-3831ba69e69d") ) - (segment - (start 153.31665 63.3731) - (end 154.81485 63.3731) - (width 0.2) - (layer "F.Cu") - (net "GATE_LS") - (uuid "e9c85986-6e2a-44b6-8cad-a294c729800c") - ) (via (at 160.69355 59.6822) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "GATE_LS") + (net "/GATE_LS") (uuid "9a721b82-e485-4463-94fd-33953c4f8165") ) (via - (at 154.88165 63.3063) + (at 154.75 63.3731) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "GATE_LS") + (net "/GATE_LS") (uuid "f892eb8c-6f39-472a-87b2-910cee27f0d3") ) (segment - (start 155.61515 62.5728) - (end 157.80295 62.5728) + (start 154.81485 63.3731) + (end 155.61515 62.5728) (width 0.2) (layer "In2.Cu") - (net "GATE_LS") - (uuid "18d4a0f3-1dde-431c-af62-db44759fa2ce") + (net "/GATE_LS") + (uuid "05675650-8b6a-41b4-bbbd-1b7c528c96c3") ) (segment (start 157.80295 62.5728) (end 160.69355 59.6822) (width 0.2) (layer "In2.Cu") - (net "GATE_LS") - (uuid "ef863bfb-a424-4be5-9154-1bd6b01e8968") + (net "/GATE_LS") + (uuid "8b1cab13-10c7-4bcc-a597-859812193e2d") ) (segment - (start 154.88165 63.3063) - (end 155.61515 62.5728) + (start 154.75 63.3731) + (end 154.81485 63.3731) (width 0.2) (layer "In2.Cu") - (net "GATE_LS") - (uuid "ff65f234-cad9-419e-bcc7-5204a567eb0e") + (net "/GATE_LS") + (uuid "aa8a8282-2063-4a46-814f-2451e5ba85e9") + ) + (segment + (start 155.61515 62.5728) + (end 157.80295 62.5728) + (width 0.2) + (layer "In2.Cu") + (net "/GATE_LS") + (uuid "f6b4164d-081b-430a-ae48-d1bbc5f082ed") ) (segment (start 155.45165 56.1858) (end 155.45165 56.3231) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "03a30072-8bb1-4b06-bf3f-7d322a7d20dd") ) (segment @@ -28958,7 +32402,7 @@ (end 169.64775 57.867) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "10db9a6d-5031-4722-bdf7-3473bd13580d") ) (segment @@ -28966,7 +32410,7 @@ (end 189.28415 58.4056) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "1ebd572f-a2c5-4737-99b8-db4c7887689d") ) (segment @@ -28974,7 +32418,7 @@ (end 188.74555 57.867) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "3f19ccce-3189-4dd6-a39a-c65d81a56567") ) (segment @@ -28982,7 +32426,7 @@ (end 151.53325 52.8022) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "6ae24c67-b185-4019-a7b3-8c9ef9af710f") ) (segment @@ -28990,7 +32434,7 @@ (end 152.06805 52.8022) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "71c0926b-2e8f-4f73-bdb0-535e412a895e") ) (segment @@ -28998,7 +32442,7 @@ (end 155.45165 56.1858) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "73387d4d-32d2-47c6-9f4b-f44081d87a36") ) (segment @@ -29006,7 +32450,7 @@ (end 189.28415 58.4056) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "9157003d-a2da-4670-a1c3-31e281526ac1") ) (segment @@ -29014,7 +32458,7 @@ (end 199.77795 63.3868) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "a5732f99-c4ee-4952-b393-60848737e967") ) (segment @@ -29022,7 +32466,7 @@ (end 145.05415 46.3231) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "d689f95d-fecf-4f7b-b117-9b4e602f3b0f") ) (segment @@ -29030,7 +32474,7 @@ (end 194.26535 63.3868) (width 1.5) (layer "F.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "e4a4676c-f269-4778-a198-5dcd40622863") ) (segment @@ -29038,7 +32482,7 @@ (end 189.28415 58.4056) (width 1.5) (layer "B.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "2182e2e0-11c7-41c2-b253-69a54912ce53") ) (segment @@ -29046,7 +32490,7 @@ (end 157.53415 58.4056) (width 1.5) (layer "B.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "2d8ef713-913f-42d0-8d82-4c746372b072") ) (segment @@ -29054,7 +32498,7 @@ (end 150.37165 64.0335) (width 1.5) (layer "In2.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "104dbaf2-fad9-4724-8015-d323f01c71f7") ) (segment @@ -29062,7 +32506,7 @@ (end 155.45165 58.9535) (width 1.5) (layer "In2.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "9d9510cb-be22-4f7c-9955-2531a41d3db8") ) (segment @@ -29070,7 +32514,7 @@ (end 155.45165 56.3231) (width 1.5) (layer "In2.Cu") - (net "SYS5V") + (net "/SYS5V") (uuid "ba4071e4-f2a9-4de2-994c-c8aae87d8a15") ) (segment @@ -29294,7 +32738,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "90fbf9ec-c2d9-41ed-91e7-5e6cabda15f9") ) (via @@ -29302,7 +32746,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "ef6d3b64-33f6-4a8e-aa32-bdc7b19b80b4") ) (segment @@ -29310,7 +32754,7 @@ (end 173.20495 77.8364) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "22567cdd-3f2a-444b-ae84-9494b3264580") ) (segment @@ -29318,7 +32762,7 @@ (end 174.19165 78.8231) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "31044fa1-206d-4434-9e57-581464c8062a") ) (segment @@ -29326,7 +32770,7 @@ (end 138.64175 53.1205) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "330efb43-b765-4adc-9db7-385016965e0c") ) (segment @@ -29334,7 +32778,7 @@ (end 144.34885 59.584) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "47f89397-4c35-4778-a0b1-c48980bc3eb7") ) (segment @@ -29342,7 +32786,7 @@ (end 141.48165 56.7168) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "532f2a1d-d5b9-4699-aec7-2f9dcfaf9454") ) (segment @@ -29350,7 +32794,7 @@ (end 119.84335 46.755) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "54d3dab6-2e0e-4e08-b2d2-c36eb33c02e7") ) (segment @@ -29358,7 +32802,7 @@ (end 141.48165 55.9604) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "858a8dea-4450-4422-9929-8bd3965dbe35") ) (segment @@ -29366,7 +32810,7 @@ (end 126.20885 53.1205) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "8ecc6582-98a3-485e-9391-9a3c4c312826") ) (segment @@ -29374,7 +32818,7 @@ (end 158.91855 59.584) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "9e0b59a3-af67-4ff6-8715-010e264e1bb6") ) (segment @@ -29382,7 +32826,7 @@ (end 160.28055 60.946) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "d20ac904-56d0-48f1-9847-b3c0f0d698b3") ) (segment @@ -29390,7 +32834,7 @@ (end 119.84335 46.3231) (width 0.2) (layer "B.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "e6e7ea05-ef7f-4aa1-8f45-0ea46ce18ded") ) (segment @@ -29398,7 +32842,7 @@ (end 189.28415 66.0256) (width 0.2) (layer "In2.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "578902eb-3e64-450d-806e-3df3b19b5616") ) (segment @@ -29406,7 +32850,7 @@ (end 176.48665 78.8231) (width 0.2) (layer "In2.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "5f7fdafc-4561-40ef-b383-8691b30fd1ad") ) (segment @@ -29414,7 +32858,7 @@ (end 160.28055 74.7836) (width 0.2) (layer "In2.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "67c0f7b5-c10b-4d9c-a292-f79eda64b1ee") ) (segment @@ -29422,7 +32866,7 @@ (end 189.28415 66.0256) (width 0.2) (layer "In2.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "6d60de93-5b5d-47c9-8bfe-19aa272ea740") ) (segment @@ -29430,9 +32874,33 @@ (end 163.33335 77.8364) (width 0.2) (layer "In2.Cu") - (net "DIN_4G") + (net "/DIN_4G") (uuid "b39834a0-c5bd-406f-98bc-d19f384dc504") ) + (segment + (start 169.515 133.785) + (end 168.475 133.785) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "0565c014-e90f-48d3-b026-9015be1be583") + ) + (segment + (start 196.54165 84.8231) + (end 199.1231 84.8231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "13665b7e-e87c-4bdd-a6d6-bb4cba315571") + ) + (segment + (start 199.1 92.85) + (end 199.0731 92.8231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "14b27b03-9c65-4fc4-902a-71affa64e90a") + ) (segment (start 129.47915 118.3231) (end 128.26165 118.3231) @@ -29441,6 +32909,38 @@ (net "GND") (uuid "17f3a039-a2ab-4c19-b9c5-c35e5156c07e") ) + (segment + (start 196.54165 92.8231) + (end 199.0731 92.8231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "242cd235-e6f7-46f8-930f-ae07cc5a9db7") + ) + (segment + (start 189.1 114.3) + (end 191.35 114.3) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "2754ee43-8393-40b6-9130-522be82115ec") + ) + (segment + (start 146.3875 60.2) + (end 147.95 60.2) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "2cbfc869-efdf-41cb-9176-b54c591e5415") + ) + (segment + (start 168.475 130.405) + (end 170.005 130.405) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "2f8e9abc-7b78-45cd-becb-45b41458d71e") + ) (segment (start 137.74165 112.3731) (end 137.69165 112.3231) @@ -29449,6 +32949,14 @@ (net "GND") (uuid "3947bd22-5eb7-4c16-a87a-cd81fcffcf24") ) + (segment + (start 157.35 131.7) + (end 157.35 132.25) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "3b1e8299-51e3-4230-b911-6db36c2777d6") + ) (segment (start 121.74165 94.3231) (end 121.24165 94.8231) @@ -29465,6 +32973,30 @@ (net "GND") (uuid "45e0c5af-357e-4156-bc9e-90e604059116") ) + (segment + (start 160.48975 123.925) + (end 158.64165 125.7731) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "480db4b3-bf32-4567-a704-5a908bd5eb53") + ) + (segment + (start 159.825 130.405) + (end 158.655 130.405) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "4ba7af62-c978-475b-9a60-5573c5e3d12e") + ) + (segment + (start 187.35 62.9464) + (end 184.50585 62.9464) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "525bb37c-9718-48bc-a1f0-7901a1898c5e") + ) (segment (start 172.3269 92.8231) (end 172.3 92.85) @@ -29497,6 +33029,30 @@ (net "GND") (uuid "6f4fb2e9-5bf7-4109-8590-47892bd04540") ) + (segment + (start 101.7731 98.3231) + (end 102.6 99.15) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "71bc8544-c5c8-44ee-a94c-ecf9dc7b6d15") + ) + (segment + (start 161.425 123.925) + (end 165.4 123.925) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "77e8ce6e-cd54-4a15-8c48-f434f9b6b195") + ) + (segment + (start 172.8 80.8) + (end 172.8231 80.8231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "78c900e7-59f7-4b3f-abdf-0e5aee1e84fe") + ) (segment (start 132.90165 118.8231) (end 137.74165 113.9831) @@ -29505,6 +33061,86 @@ (net "GND") (uuid "791e5838-817e-48b5-9bbe-b38b8cd5522f") ) + (segment + (start 101.14165 98.3231) + (end 101.7731 98.3231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "7c3f1705-6b94-44c7-9986-3c0a151e60b7") + ) + (segment + (start 170.65 131.05) + (end 170.65 132.65) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "847aa92b-6090-4b40-b95a-7886d1dc69f1") + ) + (segment + (start 158.885 133.785) + (end 159.825 133.785) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "89ba1bd5-686f-424c-96f6-8d926cb0b6dc") + ) + (segment + (start 184.50585 62.9464) + (end 184.12915 63.3231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "8b839d50-5493-4059-9eed-7bad7c856553") + ) + (segment + (start 210.19165 105.8231) + (end 208.95 104.58145) + (width 0.4) + (layer "F.Cu") + (net "GND") + (uuid "9e7adeb4-932d-4499-9778-e1192d8d20b0") + ) + (segment + (start 170.65 132.65) + (end 169.515 133.785) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "a015062c-aeab-4caa-8d82-d55abb6ce336") + ) + (segment + (start 199.1231 84.8231) + (end 199.15 84.85) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "a1f903c5-ac65-4cd6-918f-899cbf21a84e") + ) + (segment + (start 158.65 130.4) + (end 157.35 131.7) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "a71f7fb3-6f0a-41bd-8b14-662f9c9c8669") + ) + (segment + (start 167.125 130.775) + (end 167.05 130.85) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "ace3bf1f-c4f2-4cf4-bc93-39c32b69b037") + ) + (segment + (start 170.005 130.405) + (end 170.65 131.05) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "ae2dad1b-34a9-4c05-9a80-c908b39d93b1") + ) (segment (start 121.24165 94.8231) (end 119.79165 94.8231) @@ -29513,6 +33149,22 @@ (net "GND") (uuid "b08d0729-133e-4724-9cfb-15085179a555") ) + (segment + (start 167.05 130.85) + (end 167.05 132.15) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "bd8a8587-ecf3-478c-a2fe-6c72ddbd1415") + ) + (segment + (start 161.425 123.925) + (end 160.48975 123.925) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "c1d36fa7-1587-4e34-a1b6-59b08d378fda") + ) (segment (start 126.00165 118.0631) (end 128.00165 118.0631) @@ -29521,6 +33173,30 @@ (net "GND") (uuid "c62544fa-e8e1-44fa-b359-d89c9f13a9ed") ) + (segment + (start 191.35 114.3) + (end 191.35 114.8) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "cd5a978a-44ea-45f1-a682-c962529a861f") + ) + (segment + (start 158.655 130.405) + (end 158.65 130.4) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "da3e7d13-157f-4794-858f-3db6f7f3bb17") + ) + (segment + (start 188.74165 114.8231) + (end 188.74165 114.65835) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "dbaed094-9dbe-42f7-8027-2b46f7b731d8") + ) (segment (start 174.19165 92.8231) (end 172.3269 92.8231) @@ -29529,6 +33205,14 @@ (net "GND") (uuid "dd2088a2-402c-4d56-9497-d4855f61946c") ) + (segment + (start 157.35 132.25) + (end 158.885 133.785) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "e230dd68-ae7b-4ef6-a0da-89ac444ff042") + ) (segment (start 128.00165 118.0631) (end 128.26165 118.3231) @@ -29537,6 +33221,14 @@ (net "GND") (uuid "e3daf66b-7d9d-4698-b7eb-7d8587495181") ) + (segment + (start 152.05 135.6) + (end 154.05 135.6) + (width 0.25) + (layer "F.Cu") + (net "GND") + (uuid "e49d121d-cd7d-4ffc-9e81-01de535495f8") + ) (segment (start 130.90415 118.8231) (end 132.90165 118.8231) @@ -29545,6 +33237,46 @@ (net "GND") (uuid "ec009225-9d3d-45d4-9fe3-2c26215748de") ) + (segment + (start 212.1 92.85) + (end 212.0731 92.8231) + (width 0.25) + (layer "F.Cu") + (net "GND") + (uuid "f0385d0f-1767-49e0-9628-630762b09fc8") + ) + (segment + (start 188.74165 114.65835) + (end 189.1 114.3) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "f47f84d3-8164-4d74-9851-6c9956052a73") + ) + (segment + (start 210.19165 92.8231) + (end 212.0731 92.8231) + (width 0.25) + (layer "F.Cu") + (net "GND") + (uuid "f4877662-8e3e-4612-a698-ed16bd4ab2d7") + ) + (segment + (start 174.19165 80.8231) + (end 172.8231 80.8231) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "f517b459-daba-47f5-b909-a79c21d4958a") + ) + (segment + (start 202.1625 92.1) + (end 200.95 92.1) + (width 0.25) + (layer "F.Cu") + (net "GND") + (uuid "f91980de-7ce4-44a5-a79b-e483aff04dec") + ) (via (at 109.64165 76.7731) (size 0.6) @@ -29617,6 +33349,15 @@ (net "GND") (uuid "10c1b724-a4a6-4115-9222-2a3c62bab502") ) + (via + (at 194.7 105.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "15e4bd30-daca-415d-a19d-a43b1dd201f9") + ) (via (at 109.64165 125.7731) (size 0.6) @@ -29625,6 +33366,14 @@ (net "GND") (uuid "17c95441-1877-458a-b29a-5c70ee74f037") ) + (via + (at 191.35 114.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "GND") + (uuid "19ab0721-a2fa-4c31-b582-51ad9583d005") + ) (via (at 116.64165 97.7731) (size 0.6) @@ -29665,6 +33414,15 @@ (net "GND") (uuid "273cd78a-b02b-46c0-bef2-2beecf882773") ) + (via + (at 126.4 95.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "298fd8b5-977e-44c0-be9f-2f3949b08166") + ) (via (at 109.64165 62.7731) (size 0.6) @@ -29689,6 +33447,15 @@ (net "GND") (uuid "2e7c46e0-e8b8-43b5-9bed-ce463d2492ee") ) + (via + (at 102.6 99.15) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "357061ca-53b8-4b3a-85ca-e812c9c7807f") + ) (via (at 116.64165 132.7731) (size 0.6) @@ -29729,14 +33496,6 @@ (net "GND") (uuid "3cf5024c-cb34-42ba-935c-1203e67f6e61") ) - (via - (at 101.14165 98.3231) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "GND") - (uuid "3f7f8bf3-9b76-4298-a219-6e8681dee6e8") - ) (via (at 109.64165 90.7731) (size 0.6) @@ -29841,6 +33600,15 @@ (net "GND") (uuid "61d3f8cd-2e89-48d1-ada6-db4bedfe5edb") ) + (via + (at 99.3 114.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "62add83d-095c-4967-9794-55762e23ce3b") + ) (via (at 177.91665 45.3231) (size 0.6) @@ -29873,6 +33641,15 @@ (net "GND") (uuid "6ea94bf7-b1e8-4f1e-86cc-b2de727e46b7") ) + (via + (at 138.2 91.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "6f299bc8-09d7-4dc5-a16c-df0469503c6e") + ) (via (at 137.64165 111.7731) (size 0.6) @@ -29897,14 +33674,6 @@ (net "GND") (uuid "7a7337e6-cc7b-408e-bd92-97b49c034ce7") ) - (via - (at 144.64165 125.7731) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "GND") - (uuid "7fab16c7-5d59-4c13-9768-9634d13780c9") - ) (via (at 123.64165 125.7731) (size 0.6) @@ -29953,6 +33722,15 @@ (net "GND") (uuid "8847e4dc-b775-449f-813b-258dd81ac0fa") ) + (via + (at 130.2 99.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "8cb7a2cd-0a44-4cd7-b2dc-7c5fb0f0bf1e") + ) (via (at 81.64165 111.7731) (size 0.6) @@ -29986,20 +33764,12 @@ (uuid "9599d571-9d8f-451b-87a0-fcae94de44de") ) (via - (at 165.64165 90.7731) + (at 187.35 62.9464) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "GND") - (uuid "9aa050fa-1491-4aa1-8383-7e3ee89b402e") - ) - (via - (at 137.64165 125.7731) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "GND") - (uuid "9e6be318-1f2e-4e7c-9553-d2441953187c") + (uuid "9e096c2b-c938-4db9-833c-66a20eeb41dc") ) (via (at 88.64165 132.7731) @@ -30009,6 +33779,15 @@ (net "GND") (uuid "9f7b5251-91e7-40fb-b6d0-1d96b2860705") ) + (via + (at 87.6 58.75) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "a0725767-6f83-436d-b9a9-76e4787accb6") + ) (via (at 144.64165 41.7731) (size 0.6) @@ -30017,6 +33796,15 @@ (net "GND") (uuid "a28ea87c-03a7-4d36-86d6-de1418845be4") ) + (via + (at 130.2 106) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "a39faa8d-8728-4c77-8a55-e0462152c9e4") + ) (via (at 130.64165 76.7731) (size 0.6) @@ -30065,6 +33853,15 @@ (net "GND") (uuid "bebe74f1-7e0c-46ac-a2e4-c291feb9a40d") ) + (via + (at 95 114.55) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "bf7d58ca-e365-4599-af24-eee32849d7fa") + ) (via (at 81.64165 83.7731) (size 0.6) @@ -30153,6 +33950,15 @@ (net "GND") (uuid "d2a2a6b4-6a17-4bce-b95f-16ea60e981a5") ) + (via + (at 135 97.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "d341705e-11d0-43fb-9891-0e98cdc87c93") + ) (via (at 88.64165 118.7731) (size 0.6) @@ -30249,6 +34055,15 @@ (net "GND") (uuid "ec812833-f854-4090-907d-836e601596d1") ) + (via + (at 127.2 118.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "eed4b5b9-de9e-418f-aa9f-a1eedfe44828") + ) (via (at 81.64165 90.7731) (size 0.6) @@ -30281,6 +34096,15 @@ (net "GND") (uuid "fc1c62cb-5bbf-416f-91c6-39b90d945db7") ) + (via + (at 101.65 85.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (free yes) + (net "GND") + (uuid "fdc66645-e64e-4ccb-921c-2e9022da8c14") + ) (via (at 144.64165 118.7731) (size 0.6) @@ -30298,12 +34122,28 @@ (uuid "ffab106f-9bb2-4739-b732-b6063b5947db") ) (segment - (start 120.48985 67.4862) - (end 102.37855 67.4862) + (start 120.17605 67.8) + (end 102.06475 67.8) (width 0.2) (layer "F.Cu") (net "IGN_SENSE") - (uuid "1852b85b-8fc3-447b-9fef-28482444045c") + (uuid "30ce7f17-a2b1-414e-b9c1-a089ee8d0594") + ) + (segment + (start 102.06475 67.8) + (end 100.54165 69.3231) + (width 0.2) + (layer "F.Cu") + (net "IGN_SENSE") + (uuid "5872f98f-bf27-4dfe-a563-9064cd9ece4d") + ) + (segment + (start 120.7 67.65) + (end 120.32605 67.65) + (width 0.2) + (layer "F.Cu") + (net "IGN_SENSE") + (uuid "7a3fbc2f-6f06-4f23-b438-e890058fc4af") ) (segment (start 100.54165 72.8605) @@ -30313,14 +34153,6 @@ (net "IGN_SENSE") (uuid "7dd9f5ca-aada-4647-b3c5-02427f39bcc9") ) - (segment - (start 102.37855 67.4862) - (end 100.54165 69.3231) - (width 0.2) - (layer "F.Cu") - (net "IGN_SENSE") - (uuid "82a8d272-507a-483f-b33d-15b11ddf472e") - ) (segment (start 97.85165 82.8031) (end 97.44665 83.2081) @@ -30337,6 +34169,14 @@ (net "IGN_SENSE") (uuid "8d40c78e-0c56-402b-980f-115d408b1427") ) + (segment + (start 120.32605 67.65) + (end 120.17605 67.8) + (width 0.2) + (layer "F.Cu") + (net "IGN_SENSE") + (uuid "9b4d5fd6-5843-4ee7-9fb4-770e1c932e41") + ) (segment (start 96.95665 83.2081) (end 96.84165 83.3231) @@ -30418,7 +34258,7 @@ (uuid "5776d0c8-0983-4190-b2e0-b69f9a229867") ) (via - (at 120.48985 67.4862) + (at 120.7 67.65) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -30426,20 +34266,28 @@ (uuid "851ef10d-c4d0-4af4-a67c-99bffb2d8a20") ) (segment - (start 121.42855 67.4862) - (end 120.48985 67.4862) + (start 120.7 67.65) + (end 120.8638 67.4862) (width 0.2) (layer "B.Cu") (net "IGN_SENSE") - (uuid "517730db-a036-4d1a-9be7-ab2ee41e7a97") + (uuid "1eef6b1d-e170-402f-a512-c00e1a89aa86") ) (segment - (start 132.59165 56.3231) + (start 120.8638 67.4862) (end 121.42855 67.4862) (width 0.2) (layer "B.Cu") (net "IGN_SENSE") - (uuid "ae883910-7821-4d97-8ed9-433c4d601ab3") + (uuid "216aa931-bcb2-4031-8f90-dca480c1404d") + ) + (segment + (start 121.42855 67.4862) + (end 132.59165 56.3231) + (width 0.2) + (layer "B.Cu") + (net "IGN_SENSE") + (uuid "e7141e50-78f7-4de7-8772-19860374d7d1") ) (segment (start 97.85305 78.3744) @@ -30638,7 +34486,7 @@ (end 95.47995 82.7519) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "0e8d2022-32b7-4daa-b182-f94a5e88166c") ) (segment @@ -30646,7 +34494,7 @@ (end 99.03875 79.2711) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "17b31799-0f1c-43ee-b2e2-b39fbc2b44f3") ) (segment @@ -30654,7 +34502,7 @@ (end 198.57875 73.436) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "1c727956-6c0f-4543-aa35-2c460434ca1b") ) (segment @@ -30662,7 +34510,7 @@ (end 176.50445 46.6877) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "1ec2dd5b-d29f-4f85-8236-5ca16c53215b") ) (segment @@ -30670,7 +34518,7 @@ (end 210.19165 61.8231) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "2a0000cc-8326-4592-a2da-01949edd1189") ) (segment @@ -30678,7 +34526,7 @@ (end 164.89165 79.2711) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "5dab8a7c-c60c-4cb4-804b-124a48a86a26") ) (segment @@ -30686,7 +34534,7 @@ (end 95.47995 85.1456) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "604ef92f-23f2-4436-a018-5fd0a61b2816") ) (segment @@ -30694,7 +34542,7 @@ (end 164.89165 79.2711) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "6ec02d8c-6a92-4721-b29f-e0f9b72492dd") ) (segment @@ -30702,7 +34550,7 @@ (end 170.29825 73.436) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "79bbfa04-532d-4a0c-9c77-4dd25cad137f") ) (segment @@ -30710,7 +34558,7 @@ (end 178.79165 49.8352) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "82b230ec-aa5d-436b-af7e-9700141716f8") ) (segment @@ -30718,7 +34566,7 @@ (end 191.19165 49.3911) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "9cb23062-d0ad-415d-bd6b-2bed1fcb2249") ) (segment @@ -30726,7 +34574,7 @@ (end 178.79165 51.2231) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "9d8c5a20-8d78-49a7-bdea-4e80afb1e33c") ) (segment @@ -30734,7 +34582,7 @@ (end 190.53085 50.0519) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "a9f5006c-6ed8-47a9-8725-f068bb5c969b") ) (segment @@ -30742,7 +34590,7 @@ (end 164.89165 78.8426) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "aaebaa73-4fb4-4d26-9245-3edd34de3db2") ) (segment @@ -30750,7 +34598,7 @@ (end 178.79165 48.9749) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "bea8381b-8a8a-4bae-b2c4-b8cf05754c38") ) (segment @@ -30758,7 +34606,7 @@ (end 178.79165 49.8352) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "c8239d0d-ed33-4c77-a268-015244ef23e7") ) (segment @@ -30766,7 +34614,7 @@ (end 98.75905 79.4728) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "c8288579-fb41-4ea9-9489-59e968c8e6bb") ) (segment @@ -30774,7 +34622,7 @@ (end 98.83705 79.4728) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "c98023db-b91b-457e-a4e7-84e52ac2e0bf") ) (segment @@ -30782,7 +34630,7 @@ (end 174.27355 46.6877) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "de9bbcb6-ddc0-4846-8495-afdcd600098d") ) (segment @@ -30790,7 +34638,7 @@ (end 92.19165 88.4339) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "e9ff5a88-55b2-4502-abec-cfe8c4ccc014") ) (segment @@ -30798,7 +34646,7 @@ (end 173.04165 45.4558) (width 1) (layer "F.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "ed37f46a-60b1-4ed1-99d9-917466bac4e8") ) (via @@ -30806,7 +34654,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "045f0fcc-e6ac-4da1-af96-f301a0b66a39") ) (via @@ -30814,7 +34662,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "ae808e62-1b10-432e-a6a3-75f499b8a01a") ) (segment @@ -30822,7 +34670,7 @@ (end 190.53085 50.0519) (width 1) (layer "B.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "172fdf79-08ab-46a6-baf9-73c48c296d6e") ) (segment @@ -30830,7 +34678,7 @@ (end 190.53085 50.052) (width 1) (layer "B.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "bd7611e9-39be-4946-b3c8-92e9597cf099") ) (segment @@ -30838,7 +34686,7 @@ (end 198.42055 50.052) (width 1) (layer "B.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "c87d7bff-1dc9-4a44-b7d4-f89e4daea8de") ) (segment @@ -30846,7 +34694,7 @@ (end 179.60335 49.8352) (width 1) (layer "In2.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "2e5dc0bd-517d-47df-8d3e-70214d96b617") ) (segment @@ -30854,7 +34702,7 @@ (end 190.31415 49.8352) (width 1) (layer "In2.Cu") - (net "5V_FAN") + (net "/5V_FAN") (uuid "bd027a06-9e0d-4e96-8a31-83aa5eea005c") ) (segment @@ -30862,7 +34710,7 @@ (end 102.58995 100.2157) (width 1) (layer "F.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "0a1bde3d-55dc-44d2-b0ca-10009e49378e") ) (segment @@ -30870,7 +34718,7 @@ (end 108.67435 96.3772) (width 1) (layer "F.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "3bf305ca-bbd8-483c-823b-b34caa76dd0b") ) (segment @@ -30878,7 +34726,7 @@ (end 107.18325 96.3772) (width 1) (layer "F.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "93bacfb5-a58b-48f1-8712-bb707ce71bb3") ) (segment @@ -30886,7 +34734,7 @@ (end 98.08425 100.2157) (width 1) (layer "F.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "e2711864-4007-45eb-8b06-afe362b2c46d") ) (via @@ -30894,7 +34742,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "2d145733-261f-4793-a558-70af4f23ece4") ) (via @@ -30902,7 +34750,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "6e9d0c0f-6c03-46bb-bd92-d931b23c0ed7") ) (via @@ -30910,7 +34758,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "80cb925f-98e4-4ecf-b7f9-d8917fd4d9a7") ) (segment @@ -30918,7 +34766,7 @@ (end 138.07665 93.2877) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "07a102a1-06ca-4055-a991-28b557fdb5c4") ) (segment @@ -30926,7 +34774,7 @@ (end 115.85405 93.362) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "127b5501-21b2-48be-9143-1b0cdc7e2387") ) (segment @@ -30934,7 +34782,7 @@ (end 125.89645 93.2193) (width 0.75) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "1b617be7-37e9-4825-97d7-29f5b765cda7") ) (segment @@ -30942,7 +34790,7 @@ (end 126.17715 93.5) (width 0.75) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "28a5ef10-33fc-48f0-a7bc-2ae37c866138") ) (segment @@ -30950,7 +34798,7 @@ (end 108.67435 96.3772) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "29d96411-db7b-436b-a1b9-b4ea70e3196c") ) (segment @@ -30958,7 +34806,7 @@ (end 130.03225 93.8094) (width 0.75) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "482742ab-8dba-4de1-a9a7-b0d1e24cab7e") ) (segment @@ -30966,7 +34814,7 @@ (end 122.36165 93.3731) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "54d3b319-82ae-4796-9c31-e95c206ec529") ) (segment @@ -30974,7 +34822,7 @@ (end 154.57525 93.5) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "57409053-9d92-4fb2-9318-bb5424691c38") ) (segment @@ -30982,7 +34830,7 @@ (end 131.38245 93.2889) (width 0.75) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "658d5e20-addc-403d-8d7f-a9cf95b5a1d5") ) (segment @@ -30990,7 +34838,7 @@ (end 135.76205 93.2877) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "82892529-f3ac-413b-a26d-dbfc0820392f") ) (segment @@ -30998,7 +34846,7 @@ (end 111.85105 93.2005) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "833327b4-432d-4491-a9dd-4adf2a564965") ) (segment @@ -31006,7 +34854,7 @@ (end 135.76085 93.2889) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "9e480ab2-e0a1-4fd3-8b8b-476aeb38c189") ) (segment @@ -31014,7 +34862,7 @@ (end 122.35055 93.362) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "a15b089f-96c6-465a-8837-3ded4867929f") ) (segment @@ -31022,7 +34870,7 @@ (end 122.51545 93.2193) (width 0.75) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "a450ebca-aec3-4e47-b9f4-9f8737d9eea3") ) (segment @@ -31030,7 +34878,7 @@ (end 115.69255 93.2005) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "b73c8bbd-765f-4f75-a01e-4a87e48a27e2") ) (segment @@ -31038,7 +34886,7 @@ (end 129.72285 93.5) (width 0.75) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "e1a53f14-de09-4ffa-9ce5-c2432c905b99") ) (segment @@ -31046,7 +34894,7 @@ (end 138.28895 93.5) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "e856130a-b203-4fe8-b7dc-844de20fee94") ) (segment @@ -31054,95 +34902,111 @@ (end 130.86195 93.8094) (width 1) (layer "B.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "fc1d4ba0-5dfe-44d2-97c2-7a9378ba07f5") ) - (segment - (start 108.67435 96.4823) - (end 108.67435 96.3772) - (width 1) - (layer "In2.Cu") - (net "FAN_RET") - (uuid "0ed040db-047c-4bb9-ba10-3e28910fb623") - ) - (segment - (start 169.14315 78.9321) - (end 154.71545 93.3598) - (width 1) - (layer "In2.Cu") - (net "FAN_RET") - (uuid "1c10c2e2-a83b-4eac-a598-c610b5dc5081") - ) - (segment - (start 196.06435 60.2719) - (end 192.08115 60.2719) - (width 1) - (layer "In2.Cu") - (net "FAN_RET") - (uuid "1ec887b1-f610-44ea-86c7-cde51d0625c0") - ) (segment (start 192.08115 60.2719) (end 188.02765 64.3254) (width 1) (layer "In2.Cu") - (net "FAN_RET") - (uuid "1f2838e6-1d6b-4a4a-b81d-f897af5f466d") + (net "/FAN_RET") + (uuid "070f87e3-2f03-40fd-b624-cb0ffcf8e478") ) (segment - (start 182.34695 64.3254) - (end 169.14315 77.5292) + (start 108.67435 96.4823) + (end 108.67435 96.3772) (width 1) (layer "In2.Cu") - (net "FAN_RET") - (uuid "4e8a00b0-125b-47cc-98ee-dc3693f03821") + (net "/FAN_RET") + (uuid "0ed040db-047c-4bb9-ba10-3e28910fb623") + ) + (segment + (start 174.8 71.7) + (end 169.14315 77.35685) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "1075f49c-adb6-4f33-b775-3b46e04e65f1") + ) + (segment + (start 169.14315 77.35685) + (end 169.14315 78.9321) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "45b98c16-36d0-46f6-b326-eda2053e8e88") + ) + (segment + (start 180.65 71.7) + (end 174.8 71.7) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "4bbd92b6-772a-46ef-91b7-5b6db8bf0aea") + ) + (segment + (start 169.14315 78.9321) + (end 154.71545 93.3598) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "5f9d70f8-ed76-4599-8422-820143679638") ) (segment (start 197.01315 59.3231) (end 196.06435 60.2719) (width 1) (layer "In2.Cu") - (net "FAN_RET") - (uuid "90f14f5d-3835-438c-b336-dc77579f4f3a") + (net "/FAN_RET") + (uuid "7e0336c9-80a5-427f-b13e-72e069df4a4c") ) (segment - (start 188.02765 64.3254) - (end 182.34695 64.3254) + (start 196.06435 60.2719) + (end 192.08115 60.2719) (width 1) (layer "In2.Cu") - (net "FAN_RET") - (uuid "a08daad7-2b45-440a-9ed2-4aebdbede206") - ) - (segment - (start 102.58995 100.2157) - (end 104.94095 100.2157) - (width 1) - (layer "In2.Cu") - (net "FAN_RET") - (uuid "a57b2c8b-5037-40d0-873e-6ecb02cb9218") - ) - (segment - (start 169.14315 77.5292) - (end 169.14315 78.9321) - (width 1) - (layer "In2.Cu") - (net "FAN_RET") - (uuid "d47bfb77-9296-4604-b031-91f077769dbd") + (net "/FAN_RET") + (uuid "9840545e-3bd4-49c4-b3e4-6854c5b031ff") ) (segment (start 210.19165 59.3231) (end 197.01315 59.3231) (width 1) (layer "In2.Cu") - (net "FAN_RET") - (uuid "e3c382b1-ab7f-453c-93fe-e1dd1d65bcb8") + (net "/FAN_RET") + (uuid "a0b524bc-ba1c-422a-a944-013f2a640bed") + ) + (segment + (start 102.58995 100.2157) + (end 104.94095 100.2157) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "a57b2c8b-5037-40d0-873e-6ecb02cb9218") + ) + (segment + (start 188.0246 64.3254) + (end 180.65 71.7) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "b401246f-32c7-45d0-826e-c69392043279") + ) + (segment + (start 188.02765 64.3254) + (end 188.0246 64.3254) + (width 1) + (layer "In2.Cu") + (net "/FAN_RET") + (uuid "e0cf447d-af83-48fe-94ea-8d16183ff48a") ) (segment (start 104.94095 100.2157) (end 108.67435 96.4823) (width 1) (layer "In2.Cu") - (net "FAN_RET") + (net "/FAN_RET") (uuid "f7bbe320-7f91-4eec-b4a6-8841a46a29a2") ) (segment @@ -31278,7 +35142,7 @@ (end 175.01665 59.5609) (width 0.2) (layer "F.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "153f4233-f77a-4111-9201-bea515402d16") ) (segment @@ -31286,7 +35150,7 @@ (end 175.01665 59.3231) (width 0.2) (layer "F.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "52265f54-1f63-4d2d-849b-729bc518a782") ) (segment @@ -31294,7 +35158,7 @@ (end 171.70845 53.3463) (width 0.2) (layer "F.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "5fab4073-eab9-4c47-b151-d583b1711c0e") ) (segment @@ -31302,7 +35166,7 @@ (end 174.36075 60.2168) (width 0.2) (layer "F.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "614f0fc8-f806-4480-9d08-5f51d49ee8fe") ) (segment @@ -31310,7 +35174,7 @@ (end 171.69165 53.3631) (width 0.2) (layer "F.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "740cb8a3-2da6-4b7d-ab1b-b26bc1e4edf5") ) (via @@ -31318,7 +35182,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "1498eefc-1999-4bcd-8582-166aea3624da") ) (via @@ -31326,7 +35190,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "df21bf1f-a012-4e73-8143-272ac91223a5") ) (segment @@ -31334,7 +35198,7 @@ (end 173.40665 53.3463) (width 0.2) (layer "In2.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "13a0f9a1-2c69-43d4-beee-fdbf27d45a6c") ) (segment @@ -31342,7 +35206,7 @@ (end 173.40665 59.2627) (width 0.2) (layer "In2.Cu") - (net "EN_FAN") + (net "/EN_FAN") (uuid "15f2f4f0-2466-4615-b660-f2b95e6d87cc") ) (segment @@ -31350,7 +35214,7 @@ (end 199.07915 48.3231) (width 0.2) (layer "F.Cu") - (net "BLED2") + (net "/BLED2") (uuid "47e1e060-d5a8-49e6-82cb-3ac0e5304ff9") ) (segment @@ -31358,7 +35222,7 @@ (end 199.07915 44.4356) (width 0.2) (layer "F.Cu") - (net "BLED2") + (net "/BLED2") (uuid "f97b427c-e59a-4824-8c74-7c3427756e85") ) (segment @@ -31366,7 +35230,7 @@ (end 116.83165 109.4785) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "08247725-4edf-46ea-9c30-2f3fbad55db9") ) (segment @@ -31374,7 +35238,7 @@ (end 126.50225 100.0119) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "0a3767e5-2908-4094-9111-caa614ea4197") ) (segment @@ -31382,7 +35246,7 @@ (end 121.24165 90.6031) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "18a2a0f9-9fb1-41b6-9741-8df356961b27") ) (segment @@ -31390,7 +35254,7 @@ (end 119.15065 107.4163) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "18b82459-c46f-4434-bf7f-1ae0f16f6314") ) (segment @@ -31398,7 +35262,7 @@ (end 129.24165 96.3231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "2262d2f5-a138-4171-b157-77643fb158fc") ) (segment @@ -31406,7 +35270,7 @@ (end 129.89165 89.2631) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "2c45ce01-a026-4bde-9ea6-097a2b53f26c") ) (segment @@ -31414,7 +35278,7 @@ (end 129.89125 89.2627) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "2efdd97d-6e6e-4896-8590-f6cb49f17836") ) (segment @@ -31422,7 +35286,7 @@ (end 121.09165 90.4231) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "2f27a4fd-8c52-4d1c-98fa-3a3b21aa8241") ) (segment @@ -31430,7 +35294,7 @@ (end 121.09165 90.4531) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "333e4adf-f92f-42f0-a487-10b697b0a6e3") ) (segment @@ -31438,7 +35302,7 @@ (end 210.01855 108.3231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "3838bcfe-b1cf-4445-a6dc-6ad52fb94764") ) (segment @@ -31446,7 +35310,7 @@ (end 120.54165 89.8731) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "3cd793c3-5bc1-4157-8060-0a8d50efc890") ) (segment @@ -31454,7 +35318,7 @@ (end 119.38165 89.7131) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "49fe1ee6-9265-43bd-b643-377c3c67758c") ) (segment @@ -31462,7 +35326,7 @@ (end 143.25165 84.4831) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "4b1739ed-c3a5-4e83-845e-aeba3477b41b") ) (segment @@ -31470,7 +35334,7 @@ (end 154.76165 107.4163) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "5396cb18-30e8-4265-a1f4-a7e85b28f30b") ) (segment @@ -31478,7 +35342,7 @@ (end 173.54335 104.8231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "58e49a84-13c8-42ae-9ee3-04051c97aea4") ) (segment @@ -31486,7 +35350,7 @@ (end 167.04675 107.4163) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "5db2001b-5bba-44d0-9b13-f00dab58e850") ) (segment @@ -31494,7 +35358,7 @@ (end 129.24165 97.2725) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "72fe3892-2c03-4bda-948e-806a3ad4b583") ) (segment @@ -31502,7 +35366,7 @@ (end 91.93565 111.0116) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "73466e8d-5f6c-444b-a343-f80e9d448874") ) (segment @@ -31510,7 +35374,7 @@ (end 169.63995 104.8231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "75319dc7-edd3-4c97-8f2b-4aea2c3aa1c6") ) (segment @@ -31518,7 +35382,7 @@ (end 173.54335 104.8231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "86878c17-fda6-4b9e-8a39-1f0dd624f977") ) (segment @@ -31526,7 +35390,7 @@ (end 169.63995 104.8231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "89b80bea-e0d8-4074-ac1f-acc7e997cb09") ) (segment @@ -31534,7 +35398,7 @@ (end 154.76165 95.9931) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "aa7b6e06-bf75-4da8-86fa-f7d7b2900b36") ) (segment @@ -31542,7 +35406,7 @@ (end 120.30885 100.0119) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "b9183fca-513d-4133-9fe2-47e5f69214a3") ) (segment @@ -31550,7 +35414,7 @@ (end 91.41665 112.3231) (width 0.8014) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "ba055941-e547-47a4-8f14-17d893e5464d") ) (segment @@ -31558,7 +35422,7 @@ (end 134.67165 84.4831) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "bfb5dc8e-7cef-49b8-91a3-95975167fa9e") ) (segment @@ -31566,7 +35430,7 @@ (end 173.54335 104.5098) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "c372f44a-4f38-4142-ae18-d97b06e0f705") ) (segment @@ -31574,7 +35438,7 @@ (end 202.56125 100.8658) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "c644d2a9-fe12-4a62-b491-f4ae14b44439") ) (segment @@ -31582,7 +35446,7 @@ (end 117.44815 105.7138) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "cca0d99e-e60d-4751-a217-a3b3b51c6c24") ) (segment @@ -31590,7 +35454,7 @@ (end 117.44815 102.8726) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "cf1004e7-5ee9-4e63-9e0d-2b473bcd54fe") ) (segment @@ -31598,7 +35462,7 @@ (end 93.35425 109.5849) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "d238b5f6-6145-4b31-bd81-01d19bb11793") ) (segment @@ -31606,7 +35470,7 @@ (end 93.35425 109.593) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "d633a395-0c50-4d92-88c6-70586a2a2daf") ) (segment @@ -31614,7 +35478,7 @@ (end 91.71565 112.0241) (width 0.8014) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "d7bf1947-a717-4623-8ed0-0d9e2089d160") ) (segment @@ -31622,7 +35486,7 @@ (end 121.24165 91.8731) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "dbf229ac-4849-466e-828d-f4d64d898837") ) (segment @@ -31630,7 +35494,7 @@ (end 119.54165 89.8731) (width 0.2) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "ef5ddb71-8950-4f70-8e98-0bd6f3a6c1da") ) (segment @@ -31638,7 +35502,7 @@ (end 177.18735 100.8658) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "f07b0703-a659-4b4b-a3a1-b07ecfd55647") ) (segment @@ -31646,7 +35510,7 @@ (end 126.86125 89.2627) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "f1aa82e8-2805-44ab-a279-99831fa4ea7d") ) (segment @@ -31654,7 +35518,7 @@ (end 171.59165 104.8231) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "f8c69bd0-ecd9-45a8-8571-be33ffdbb4ad") ) (segment @@ -31662,7 +35526,7 @@ (end 143.25165 84.4831) (width 1.5) (layer "F.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "ff6c9679-42d2-4cce-8c56-729c74f757e4") ) (via @@ -31670,7 +35534,7 @@ (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "80f5e446-ef74-4829-94c0-93c6e7021cb7") ) (via @@ -31678,7 +35542,7 @@ (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "e28de858-77d6-4c6f-8476-ce5bb9635b28") ) (via @@ -31686,7 +35550,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "eb8b02a9-065a-4320-9cb7-90f1cf1c85f1") ) (via @@ -31694,7 +35558,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "f50b548e-8495-4f2e-a554-b109e9a48772") ) (segment @@ -31702,7 +35566,7 @@ (end 119.61165 89.3031) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "03250592-53c0-4091-a712-a9ed198790df") ) (segment @@ -31710,7 +35574,7 @@ (end 125.53165 90.9731) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "06e8b610-1d1a-4efa-a222-0eaf296d9747") ) (segment @@ -31718,7 +35582,7 @@ (end 126.75165 89.2231) (width 1) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "136cef64-a6d0-4629-aa89-d400bdffcb68") ) (segment @@ -31726,7 +35590,7 @@ (end 119.49165 89.4231) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "1919adb6-1bc9-4ef5-b620-b167ba341363") ) (segment @@ -31734,7 +35598,7 @@ (end 93.46065 109.4785) (width 1.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "1bfbafeb-f615-4fbb-8585-5b1a12c4f107") ) (segment @@ -31742,7 +35606,7 @@ (end 124.47165 92.0331) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "6cd8e13d-06f8-4168-b17d-7048580351f8") ) (segment @@ -31750,7 +35614,7 @@ (end 120.87165 89.3031) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "70c14d29-492c-4d62-897b-d30e2c410f94") ) (segment @@ -31758,7 +35622,7 @@ (end 93.35425 109.5849) (width 1.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "78d7a01e-691b-43cd-b858-5c182dd28937") ) (segment @@ -31766,7 +35630,7 @@ (end 124.47165 92.0831) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "8a89c585-2909-44e5-aa8f-5d978f2832a4") ) (segment @@ -31774,7 +35638,7 @@ (end 126.70205 89.2727) (width 1) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "b056efeb-2ec3-4f8c-8092-5965b409b87b") ) (segment @@ -31782,7 +35646,7 @@ (end 125.53165 90.4331) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "b24ee0b6-123d-41be-a5e4-a0449e64e2d9") ) (segment @@ -31790,7 +35654,7 @@ (end 125.53165 90.4331) (width 0.75) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "d3c50d92-445d-47dd-974a-95fb46da0f25") ) (segment @@ -31798,7 +35662,7 @@ (end 125.54165 90.4331) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "dd7c9e77-d3f7-47fd-b651-ce68bdbf9584") ) (segment @@ -31806,7 +35670,7 @@ (end 123.65165 92.0831) (width 0.5) (layer "B.Cu") - (net "BAT_PLUS") + (net "/BAT_PLUS") (uuid "ebef9040-331e-4a29-9af3-80608898e528") ) (segment @@ -31814,7 +35678,7 @@ (end 115.74345 105.3958) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "096c6e15-ec49-4c4c-aff0-6982cb26e346") ) (segment @@ -31822,7 +35686,7 @@ (end 123.69165 93.8231) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "5c643a31-0d53-4380-a942-c65615781f2e") ) (segment @@ -31830,7 +35694,7 @@ (end 125.28145 94.0231) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "7fcb9c36-59a1-4917-995d-4d9f8535b379") ) (segment @@ -31838,7 +35702,7 @@ (end 124.343121 93.8231) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "802f32a0-cd0a-40cc-ae69-f8d628d863ed") ) (segment @@ -31846,7 +35710,7 @@ (end 104.61895 105.3958) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "86fa7294-6e98-4743-b6b6-9df13fcf14b8") ) (segment @@ -31854,7 +35718,7 @@ (end 124.443121 93.7231) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "8d3b5060-6783-4cc0-ae85-97b0824c12eb") ) (segment @@ -31862,7 +35726,7 @@ (end 124.98145 93.7231) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "92519856-6bcf-4189-b20a-ab8a782ea714") ) (segment @@ -31870,7 +35734,7 @@ (end 125.47165 94.0231) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "b8acff4d-9d5e-4e64-ab06-de5f750a55a3") ) (segment @@ -31878,7 +35742,7 @@ (end 125.49165 94.0831) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "c4754a2e-c8b9-4a8e-9408-23f9700a3ed4") ) (segment @@ -31886,7 +35750,7 @@ (end 125.49165 94.0431) (width 0.2) (layer "F.Cu") - (net "NTC") + (net "/NTC") (uuid "f55a4873-5de1-4a10-82e5-5c8c0a4b8aa1") ) (via @@ -31894,7 +35758,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "NTC") + (net "/NTC") (uuid "b65215b4-02af-4e30-8cf9-50425d2dd143") ) (via @@ -31902,175 +35766,175 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "NTC") + (net "/NTC") (uuid "c5a31b16-72ca-4309-9568-ed4bdde54759") ) - (segment - (start 128.13535 94.4575) - (end 129.54665 94.4575) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "12bc3e9b-3634-4259-8d72-3e8e0189a5ab") - ) - (segment - (start 126.11975 94.245) - (end 127.92285 94.245) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "19923fa1-bb43-493a-b0da-13721b5dc445") - ) - (segment - (start 137.25875 94.0906) - (end 137.74585 94.0906) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "1aadd5eb-611c-4636-ba59-f66da21cd42b") - ) - (segment - (start 202.47775 94.4575) - (end 210.19165 102.1714) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "1fda5c40-7d7b-471d-95b7-9a72d63cd079") - ) - (segment - (start 127.92285 94.245) - (end 128.13535 94.4575) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "28e88c0f-6eef-4c83-b24f-d66c598312ed") - ) - (segment - (start 137.25755 94.0894) - (end 137.25875 94.0906) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "2ae317df-362a-45a9-93fe-1aba615928a4") - ) - (segment - (start 136.09285 94.0906) - (end 136.09405 94.0894) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "48d968cd-5ffa-4c10-979e-0d70b4466894") - ) - (segment - (start 125.70165 94.2531) - (end 125.71165 94.2631) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "501116fb-77cd-470f-92ce-11f09c88116f") - ) - (segment - (start 125.71165 94.2631) - (end 126.10165 94.2631) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "5c3825a4-cf84-4356-acb3-47850e064449") - ) - (segment - (start 129.54665 94.4575) - (end 129.70025 94.6111) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "65a335b8-6e46-4e40-8cec-b1101c48ddea") - ) - (segment - (start 129.70025 94.6111) - (end 131.19395 94.6111) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "6fc6860c-552f-4b32-a207-8eb23500d9a7") - ) (segment (start 125.53165 94.1231) (end 125.66165 94.2531) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "7d50bd7e-ff03-4d36-a308-eb02ebffc5f2") + (net "/NTC") + (uuid "046b7520-8bf2-4430-a795-654ec67f43af") ) (segment - (start 137.74585 94.0906) - (end 138.11275 94.4575) + (start 128.13535 94.4575) + (end 129.54665 94.4575) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "839801f3-95ad-4a66-99f6-a3c602ca7414") + (net "/NTC") + (uuid "1a2c28b1-8fdd-430d-b5a1-dd17e5085701") ) (segment - (start 136.09405 94.0894) - (end 137.25755 94.0894) + (start 125.71165 94.2631) + (end 126.10165 94.2631) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "8c08e7d7-8183-4ce2-9997-259d02cc7b5a") + (net "/NTC") + (uuid "450dae0a-f389-421e-9f32-11814ab0499e") ) (segment - (start 210.19165 102.1714) - (end 210.19165 103.3231) + (start 203.07025 95.05) + (end 210.19165 102.1714) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "ac5b4365-056d-4e36-a547-f1f36fc0131e") + (net "/NTC") + (uuid "4821e55a-111e-4a32-9c8c-22e8bc0161e1") ) (segment - (start 131.19395 94.6111) - (end 131.71445 94.0906) + (start 129.54665 94.4575) + (end 129.70025 94.6111) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "bab53560-b249-466e-bc21-4f45445bf99a") + (net "/NTC") + (uuid "5592385d-fc6b-4b10-b996-28d6215bdd88") ) (segment (start 125.66165 94.2531) (end 125.70165 94.2531) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "e69b5c32-d709-435c-8eb1-8ab3a62186ae") + (net "/NTC") + (uuid "58999915-da60-4b63-8955-657b87e7b202") + ) + (segment + (start 125.70165 94.2531) + (end 125.71165 94.2631) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "629fa0be-fd77-402e-919a-8266a7674eb1") + ) + (segment + (start 129.70025 94.6111) + (end 131.19395 94.6111) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "677442fb-802c-42a9-a1ed-6da3d7041bca") + ) + (segment + (start 126.11975 94.245) + (end 127.92285 94.245) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "73aeac7d-35a9-4a77-b795-5d5b6c577141") + ) + (segment + (start 210.19165 102.1714) + (end 210.19165 103.3231) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "90a22e53-5a48-4f59-88c2-41a4f896a34e") + ) + (segment + (start 138.70525 95.05) + (end 203.07025 95.05) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "9a9b61fb-376b-40f0-8204-123af4f800b3") + ) + (segment + (start 127.92285 94.245) + (end 128.13535 94.4575) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "a5d81afa-4f90-4ac5-97ca-9f2ae9915861") ) (segment (start 131.71445 94.0906) (end 136.09285 94.0906) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "f04b20ce-4ba3-44d6-a61e-8459adea1c88") + (net "/NTC") + (uuid "be037f93-840b-47b0-8d1d-b78d11a71ab8") + ) + (segment + (start 131.19395 94.6111) + (end 131.71445 94.0906) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "c37e318c-8b85-491c-abc9-fb992b60072e") + ) + (segment + (start 137.25755 94.0894) + (end 137.25875 94.0906) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "cc559edd-0cef-4d6b-a28a-37f9c1439c88") + ) + (segment + (start 137.25875 94.0906) + (end 137.74585 94.0906) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "cd3a674a-70b2-4217-82c7-d40811758d43") + ) + (segment + (start 136.09285 94.0906) + (end 136.09405 94.0894) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "da08007f-1fc8-4215-bf0d-80337067d79d") + ) + (segment + (start 136.09405 94.0894) + (end 137.25755 94.0894) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "dfe8cdbc-ea8c-47b5-a6a2-d5897583dd26") + ) + (segment + (start 137.74585 94.0906) + (end 138.70525 95.05) + (width 0.2) + (layer "B.Cu") + (net "/NTC") + (uuid "f2aa39c3-4531-45c3-9f70-64e57c3daccc") ) (segment (start 126.10165 94.2631) (end 126.11975 94.245) (width 0.2) (layer "B.Cu") - (net "NTC") - (uuid "fcff31d2-d4ae-4375-bb27-6981897f7a59") - ) - (segment - (start 138.11275 94.4575) - (end 202.47775 94.4575) - (width 0.2) - (layer "B.Cu") - (net "NTC") - (uuid "fef62ce3-fa1d-44ae-8cec-b7ef88016326") + (net "/NTC") + (uuid "fb307c98-bc81-405c-9d7c-73bf132c9ebf") ) (segment (start 116.71895 105.3958) (end 125.77165 96.3431) (width 0.2) (layer "In2.Cu") - (net "NTC") + (net "/NTC") (uuid "1101edd9-4cfc-459f-bbd2-d320940b3cf9") ) (segment @@ -32078,7 +35942,7 @@ (end 125.53165 94.1231) (width 0.2) (layer "In2.Cu") - (net "NTC") + (net "/NTC") (uuid "14c0172f-be58-4f94-b47e-68148e4b9b25") ) (segment @@ -32086,7 +35950,7 @@ (end 125.77165 94.3631) (width 0.2) (layer "In2.Cu") - (net "NTC") + (net "/NTC") (uuid "31686949-fe71-481d-a443-0265994f39a0") ) (segment @@ -32094,7 +35958,7 @@ (end 116.71895 105.3958) (width 0.2) (layer "In2.Cu") - (net "NTC") + (net "/NTC") (uuid "e42d02b4-25ea-4e81-8db9-967a577cdf04") ) (segment @@ -32102,7 +35966,7 @@ (end 118.50335 57.4748) (width 0.2) (layer "F.Cu") - (net "NRST") + (net "/NRST") (uuid "8d96061a-df74-4af7-96bd-6d44e43bbdc1") ) (segment @@ -32110,7 +35974,7 @@ (end 124.19295 57.4748) (width 0.2) (layer "F.Cu") - (net "NRST") + (net "/NRST") (uuid "cfcad90b-0e31-4338-a2d7-2d84d736afd0") ) (via @@ -32118,7 +35982,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "NRST") + (net "/NRST") (uuid "44abcdce-4a01-4cbf-8be0-172bd52f5129") ) (segment @@ -32126,7 +35990,7 @@ (end 205.69165 133.3231) (width 0.2) (layer "B.Cu") - (net "NRST") + (net "/NRST") (uuid "d0357154-0048-4219-bd9d-63c2ded9efbd") ) (segment @@ -32134,7 +35998,7 @@ (end 205.69165 84.5481) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "03f87f00-9eb4-4a73-ade7-2361c43fa14b") ) (segment @@ -32142,7 +36006,7 @@ (end 184.84165 130.2037) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "224b7b62-31b6-4c6b-b2b3-cde29ff4c3dd") ) (segment @@ -32150,7 +36014,7 @@ (end 141.48165 76.5313) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "4e2eaaff-3e79-479d-b297-9743cc658f9a") ) (segment @@ -32158,7 +36022,7 @@ (end 205.69165 133.3231) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "6b5d11dd-afc6-4b08-b09a-4f42bdef905e") ) (segment @@ -32166,7 +36030,7 @@ (end 196.07225 130.2037) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "722b2be3-f9d3-4b83-8f65-c6f939c0b2be") ) (segment @@ -32174,7 +36038,7 @@ (end 141.48165 73.7338) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "9c845f44-2836-458b-b49c-e096163ce209") ) (segment @@ -32182,7 +36046,7 @@ (end 144.46165 79.5113) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "b3421c04-815d-4b4e-9cfd-53f9723bbe48") ) (segment @@ -32190,7 +36054,7 @@ (end 144.46165 89.8237) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "b69bfb85-cf3c-441a-a409-2cee8f5c49fb") ) (segment @@ -32198,7 +36062,7 @@ (end 125.22265 57.4748) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "bbe2074e-b06f-4092-8f1e-c0530d829ff6") ) (segment @@ -32206,7 +36070,7 @@ (end 199.19165 133.3231) (width 0.2) (layer "In2.Cu") - (net "NRST") + (net "/NRST") (uuid "d6881d6e-177d-4515-b856-6067de371680") ) (segment @@ -32222,7 +36086,7 @@ (end 184.34635 115.685) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "20161747-8562-4bfb-94e4-102811182bda") ) (segment @@ -32230,7 +36094,7 @@ (end 185.94895 116.0269) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "2066e2c5-96ff-46d1-a47e-97e0e558fa02") ) (segment @@ -32238,7 +36102,7 @@ (end 165.49335 118.3231) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "20de7684-129b-4aa8-bdc0-a706f30a265a") ) (segment @@ -32246,7 +36110,7 @@ (end 198.54785 116.0269) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "45a56ed6-66f6-4aaf-bdbb-51e217715a0b") ) (segment @@ -32254,7 +36118,7 @@ (end 188.69165 109.8231) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "57b68b19-d1c7-4420-88e3-199396c89edb") ) (segment @@ -32262,7 +36126,7 @@ (end 168.72585 115.0906) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "711676a6-388a-430b-a297-e67806e1b14a") ) (segment @@ -32270,7 +36134,7 @@ (end 188.69165 106.0231) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "725d492b-05d0-4619-837c-93a054f8a804") ) (segment @@ -32278,7 +36142,7 @@ (end 185.60705 115.685) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "9dc45987-5954-483e-8f9f-0b747118e2ff") ) (segment @@ -32286,7 +36150,7 @@ (end 165.49335 118.3231) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "aecec7f0-21e5-458b-82f1-fcf6cf462d46") ) (segment @@ -32294,7 +36158,7 @@ (end 187.09685 116.0269) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "c206e2b2-d59f-42c6-9af5-df475dc2c1d7") ) (segment @@ -32302,7 +36166,7 @@ (end 183.75195 115.0906) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "df9058c2-957f-4bc2-86d9-88147aa31840") ) (segment @@ -32310,7 +36174,7 @@ (end 188.69165 107.616) (width 1) (layer "F.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "e9e032db-5431-4f09-b05b-faee257f4c85") ) (via @@ -32318,7 +36182,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "0f0fad1b-4f6e-46e3-b0ee-8158a64f1782") ) (via @@ -32326,7 +36190,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "6a7ad96d-ece3-4edf-a091-cb95a8e65d0a") ) (segment @@ -32334,7 +36198,7 @@ (end 188.69165 107.616) (width 1) (layer "In2.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "6630ee25-ccff-4c53-93f6-3b672ce36120") ) (segment @@ -32342,7 +36206,7 @@ (end 187.09685 109.2108) (width 1) (layer "In2.Cu") - (net "SW3_NODE") + (net "/SW3_NODE") (uuid "a2951762-ba14-4d53-bcc2-b2bfc468340e") ) (segment @@ -32350,7 +36214,7 @@ (end 141.91085 113.0839) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "085b8721-0074-45b6-bd37-61272c5a5f42") ) (segment @@ -32358,39 +36222,39 @@ (end 202.13665 113.2081) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "0f5abc98-86cd-4c72-a683-1acee4c71088") ) (segment - (start 157.04515 62.4794) - (end 156.11845 63.4061) + (start 156.8 62.7) + (end 157.04515 62.45485) (width 1) (layer "F.Cu") - (net "SW_5V") - (uuid "12e4f1a2-c0a0-45a5-aeea-6d2b862726f0") + (net "/SW_5V") + (uuid "3317df3f-675d-4969-b819-3791b85bdf00") + ) + (segment + (start 157.04515 62.45485) + (end 157.04515 53.5766) + (width 1) + (layer "F.Cu") + (net "/SW_5V") + (uuid "36c6d57c-6aca-476f-ae59-51da1c5a3696") ) (segment (start 157.04515 53.5766) - (end 157.04515 62.4794) + (end 154.69165 51.2231) (width 1) (layer "F.Cu") - (net "SW_5V") - (uuid "1396eeb8-43af-4357-8d0a-85fdbe0d708f") - ) - (segment - (start 155.28145 64.3231) - (end 156.11845 63.4861) - (width 1) - (layer "F.Cu") - (net "SW_5V") - (uuid "4abcad19-e3d3-4e65-9244-5b12c8f19e4b") + (net "/SW_5V") + (uuid "6f27ff01-d2f4-4e68-868a-47dcc0cc8496") ) (segment (start 171.61685 113.4773) (end 193.55595 113.4773) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "71bb66c7-d5b7-45ea-9ca3-3d7e2323336a") ) (segment @@ -32398,7 +36262,7 @@ (end 171.76015 97.6909) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "7ba1ad2f-e519-4b7b-b3ae-79404ac2af6b") ) (segment @@ -32406,7 +36270,7 @@ (end 195.14665 113.2081) (width 0.601) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "87e8d1da-efe1-41a8-aa3c-d7d3f7757f8e") ) (segment @@ -32414,39 +36278,23 @@ (end 179.74165 95.3231) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "9a7e8e49-bd1a-4807-8cb3-30a3648f9b91") ) - (segment - (start 154.69165 51.2231) - (end 157.04515 53.5766) - (width 1) - (layer "F.Cu") - (net "SW_5V") - (uuid "9f8474e1-b28f-4514-a206-93abfa90d07b") - ) (segment (start 202.13665 113.2081) (end 202.15165 113.1931) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "a764bb4a-c481-46b4-a8fe-f946273455f1") ) - (segment - (start 155.19165 64.3231) - (end 155.28145 64.3231) - (width 1) - (layer "F.Cu") - (net "SW_5V") - (uuid "b1165477-b3ef-4492-bd21-2d98a5d1cc96") - ) (segment (start 193.55595 113.4773) (end 194.87745 113.4773) (width 0.601) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "b56e2daa-19cb-4b70-83c0-f71cf9219be6") ) (segment @@ -32454,23 +36302,39 @@ (end 125.41165 129.5831) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "c176e9bf-4960-4ece-a15c-35a9ffe3283b") ) + (segment + (start 156.8 63.9) + (end 156.8 62.7) + (width 1) + (layer "F.Cu") + (net "/SW_5V") + (uuid "c83dfdb0-7c98-4f70-af05-3d0fa18b326d") + ) (segment (start 179.74165 95.3231) (end 179.69165 95.3731) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "cebb188e-481b-4f1f-8064-cedd9a54a06d") ) + (segment + (start 143.9875 65.3) + (end 139.5875 60.9) + (width 1) + (layer "F.Cu") + (net "/SW_5V") + (uuid "d6c0c5ae-f973-44c1-9ef9-9e43b80e71ab") + ) (segment (start 171.61685 113.4773) (end 171.22345 113.0839) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "d7c43d8e-a305-460e-af8b-feec3c88eeb2") ) (segment @@ -32478,23 +36342,39 @@ (end 174.07795 95.3731) (width 1) (layer "F.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "e41a20cf-ebf1-4dba-9940-5280817155ee") ) (segment - (start 156.11845 63.4861) - (end 156.11845 63.4061) + (start 154.7 65.3) + (end 143.9875 65.3) (width 1) (layer "F.Cu") - (net "SW_5V") - (uuid "f0d37402-86de-4648-845a-c6bae948e5f0") + (net "/SW_5V") + (uuid "e5637c55-8454-4c3a-9c7d-c039a610da08") + ) + (segment + (start 156.1 63.9) + (end 154.7 65.3) + (width 1) + (layer "F.Cu") + (net "/SW_5V") + (uuid "eaf49f24-4af0-4360-b5ed-6bfb37059bf0") + ) + (segment + (start 156.8 63.9) + (end 156.1 63.9) + (width 1) + (layer "F.Cu") + (net "/SW_5V") + (uuid "ec8b2091-bc0a-4636-b28e-8021eb4c2fe2") ) (via (at 171.76015 97.6909) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "116704f3-5f82-435e-a92c-07effa4bdd4c") ) (via @@ -32502,7 +36382,7 @@ (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "63e1ae8a-28ca-445f-9297-cca5386e1e16") ) (via @@ -32510,15 +36390,15 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "77671b6f-1164-46b7-bc2e-ae2b9ff4e01c") ) (via - (at 156.11845 63.4061) + (at 156.8 63.9) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "d9998445-a48e-46a5-8f58-edd79d8ddfe3") ) (segment @@ -32526,7 +36406,7 @@ (end 176.63265 118.4931) (width 1) (layer "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "0c38e0e6-3e8b-4f02-a1d0-901ebac44da1") ) (segment @@ -32534,7 +36414,7 @@ (end 196.85165 118.4931) (width 1) (layer "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "390c7f3d-5aef-4c3f-bcf9-bbdff1fb3287") ) (segment @@ -32542,39 +36422,55 @@ (end 171.61685 113.4773) (width 1) (layer "B.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "c5cb7eba-027e-419d-9e3f-6062d5db1365") ) (segment - (start 167.17105 102.28) - (end 171.76015 97.6909) + (start 156.8 63.9) + (end 156.8 64.08765) (width 1) (layer "In2.Cu") - (net "SW_5V") - (uuid "30f1e75c-2459-4d75-9a62-2d8654ebf5ec") - ) - (segment - (start 156.11845 63.4061) - (end 157.01015 64.2978) - (width 1) - (layer "In2.Cu") - (net "SW_5V") - (uuid "33361093-8f96-4c13-95e7-051f0864758c") + (net "/SW_5V") + (uuid "08bce9fe-2024-4fcd-bf7b-b171c6924f69") ) (segment (start 157.01015 64.2978) (end 157.01015 87.3331) (width 1) (layer "In2.Cu") - (net "SW_5V") - (uuid "48089925-09e8-4adf-ab79-e3416212dfc6") + (net "/SW_5V") + (uuid "1bb7e114-63f9-4c35-b5a7-8ae4ed921501") + ) + (segment + (start 157.01015 87.3331) + (end 153.50495 90.8383) + (width 1) + (layer "In2.Cu") + (net "/SW_5V") + (uuid "2a28c8bd-98e7-4ffe-94f3-ee36ed4eecbe") + ) + (segment + (start 167.17105 102.28) + (end 171.76015 97.6909) + (width 1) + (layer "In2.Cu") + (net "/SW_5V") + (uuid "30f1e75c-2459-4d75-9a62-2d8654ebf5ec") + ) + (segment + (start 156.8 64.08765) + (end 157.01015 64.2978) + (width 1) + (layer "In2.Cu") + (net "/SW_5V") + (uuid "3e63f1a0-0d7c-4c93-9bf0-eb84a646909a") ) (segment (start 167.17105 109.0315) (end 167.17105 102.28) (width 1) (layer "In2.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "4f02ba7f-0a0f-40cd-b154-940025aace31") ) (segment @@ -32582,23 +36478,15 @@ (end 153.50495 93.892) (width 1) (layer "In2.Cu") - (net "SW_5V") - (uuid "6a4843ae-f610-4289-9919-3bfbbd5901c2") - ) - (segment - (start 157.01015 87.3331) - (end 153.50495 90.8383) - (width 1) - (layer "In2.Cu") - (net "SW_5V") - (uuid "6a96e61b-bcd9-4782-9568-a7ec9fd731f0") + (net "/SW_5V") + (uuid "6af142fe-c28a-4dd1-a8b9-947488e50deb") ) (segment (start 171.61685 113.4773) (end 167.17105 109.0315) (width 1) (layer "In2.Cu") - (net "SW_5V") + (net "/SW_5V") (uuid "7019b5ac-2630-4921-a94f-c73b420f152b") ) (segment @@ -32606,23 +36494,23 @@ (end 161.89295 102.28) (width 1) (layer "In2.Cu") - (net "SW_5V") - (uuid "8f55c93e-8fb3-4824-8e0d-c76752536210") + (net "/SW_5V") + (uuid "beac2a4d-731f-4db0-9048-c4089fc96bc3") ) (segment (start 161.89295 102.28) (end 167.17105 102.28) (width 1) (layer "In2.Cu") - (net "SW_5V") - (uuid "f52b4451-9248-49e0-b682-3608e13fc8d6") + (net "/SW_5V") + (uuid "f7a35e1d-c780-48b1-a504-363af370f087") ) (segment (start 203.71165 111.9381) (end 200.09665 111.9381) (width 0.2) (layer "F.Cu") - (net "COMP3") + (net "/COMP3") (uuid "2d89faab-5ba1-4011-a033-e5c46593d2ff") ) (segment @@ -32630,7 +36518,7 @@ (end 200.25175 117.393) (width 0.2) (layer "F.Cu") - (net "COMP3") + (net "/COMP3") (uuid "5ca84aa2-a192-434e-b62a-2e2777d43428") ) (segment @@ -32638,7 +36526,7 @@ (end 179.93655 117.393) (width 0.2) (layer "F.Cu") - (net "COMP3") + (net "/COMP3") (uuid "6603296b-1cfe-4c3d-be43-68463d653506") ) (segment @@ -32646,7 +36534,7 @@ (end 203.71165 113.9331) (width 0.2) (layer "F.Cu") - (net "COMP3") + (net "/COMP3") (uuid "b3912370-ba7b-4d17-88e7-c1e8d9a7fd42") ) (segment @@ -32654,7 +36542,7 @@ (end 203.71165 111.9381) (width 0.2) (layer "F.Cu") - (net "COMP3") + (net "/COMP3") (uuid "ccd58f6c-ac32-47be-959c-8dd57b7ef663") ) (segment @@ -32662,7 +36550,7 @@ (end 181.47435 109.4983) (width 0.2) (layer "F.Cu") - (net "FB3") + (net "/FB3") (uuid "1f6ae4ef-a90c-4a47-8baa-b666af302158") ) (segment @@ -32670,7 +36558,7 @@ (end 197.01475 110.6681) (width 0.2) (layer "F.Cu") - (net "FB3") + (net "/FB3") (uuid "2470f128-b32d-4d77-9971-383cd00a50cd") ) (segment @@ -32678,7 +36566,7 @@ (end 180.86685 109.4983) (width 0.2) (layer "F.Cu") - (net "FB3") + (net "/FB3") (uuid "718627fd-1993-48c5-98a2-19641bfec672") ) (segment @@ -32686,7 +36574,7 @@ (end 196.89095 110.5443) (width 0.2) (layer "F.Cu") - (net "FB3") + (net "/FB3") (uuid "831f5208-b352-4749-b751-b5d0d12c1486") ) (segment @@ -32694,7 +36582,7 @@ (end 188.66975 102.3231) (width 0.2) (layer "F.Cu") - (net "FB3") + (net "/FB3") (uuid "9fadbc54-7e81-4818-93ca-d6b4c217655b") ) (via @@ -32702,7 +36590,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FB3") + (net "/FB3") (uuid "a8b18cde-9356-4f1c-9e9e-60e53dd781b9") ) (via @@ -32710,7 +36598,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FB3") + (net "/FB3") (uuid "cd57b2f9-dbb5-4586-ac0d-fbc731979b2a") ) (via @@ -32718,7 +36606,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FB3") + (net "/FB3") (uuid "d8aff593-f6e3-47a8-ad5b-506a8fb96836") ) (segment @@ -32726,7 +36614,7 @@ (end 188.66975 102.3231) (width 0.2) (layer "In2.Cu") - (net "FB3") + (net "/FB3") (uuid "4472db4a-2aa8-499c-acab-55579de54fcf") ) (segment @@ -32734,7 +36622,7 @@ (end 188.64955 102.3231) (width 0.2) (layer "In2.Cu") - (net "FB3") + (net "/FB3") (uuid "7c2e707d-e1e3-4804-a2b1-c3dd26478ad5") ) (segment @@ -32742,7 +36630,7 @@ (end 188.66975 102.3231) (width 0.2) (layer "In2.Cu") - (net "FB3") + (net "/FB3") (uuid "d3f8ecb4-cb05-4f54-91a3-2a51dddc3188") ) (segment @@ -32750,7 +36638,7 @@ (end 194.48415 112.6006) (width 0.2) (layer "F.Cu") - (net "FREQ3") + (net "/FREQ3") (uuid "2160aeaf-5f5a-4763-bd44-4f257556d5de") ) (segment @@ -32758,7 +36646,7 @@ (end 179.46915 112.6006) (width 0.2) (layer "F.Cu") - (net "FREQ3") + (net "/FREQ3") (uuid "bea3a1ff-8ec7-4dc4-b32f-3c0352fae43e") ) (segment @@ -32766,7 +36654,7 @@ (end 178.69165 111.8231) (width 0.2) (layer "F.Cu") - (net "FREQ3") + (net "/FREQ3") (uuid "ce3c1f81-ec1e-42f4-b15a-2be5d4adcc96") ) (segment @@ -32774,7 +36662,7 @@ (end 194.87265 114.7521) (width 0.2) (layer "F.Cu") - (net "BST3") + (net "/BST3") (uuid "010f0c45-e439-417b-95fc-c6ad76043275") ) (segment @@ -32782,7 +36670,7 @@ (end 195.14665 114.4781) (width 0.2) (layer "F.Cu") - (net "BST3") + (net "/BST3") (uuid "47df1d5f-a2df-44e9-adc4-b1c48951a9a9") ) (segment @@ -32790,7 +36678,7 @@ (end 187.14165 107.7175) (width 0.2) (layer "F.Cu") - (net "BST3") + (net "/BST3") (uuid "bf7aeb32-a134-491e-854b-125f6a548bee") ) (via @@ -32798,7 +36686,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BST3") + (net "/BST3") (uuid "9eeac92c-5e29-4810-a80d-ecd8ffc276ea") ) (via @@ -32806,7 +36694,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BST3") + (net "/BST3") (uuid "f6836f5e-a6b9-48f3-b4e5-5fd3f1e3867f") ) (segment @@ -32814,7 +36702,7 @@ (end 192.97615 110.6958) (width 0.2) (layer "In2.Cu") - (net "BST3") + (net "/BST3") (uuid "591d9ca1-07af-49dd-b223-a2006e02cf34") ) (segment @@ -32822,7 +36710,7 @@ (end 189.07715 106.7968) (width 0.2) (layer "In2.Cu") - (net "BST3") + (net "/BST3") (uuid "895daf1b-d12b-42cb-b844-87da94431c43") ) (segment @@ -32830,7 +36718,7 @@ (end 192.97615 114.7521) (width 0.2) (layer "In2.Cu") - (net "BST3") + (net "/BST3") (uuid "89bd7408-5ea9-4f4e-832e-a143ed61e002") ) (segment @@ -32838,7 +36726,7 @@ (end 188.06235 106.7968) (width 0.2) (layer "In2.Cu") - (net "BST3") + (net "/BST3") (uuid "a3aaa9db-18f5-449c-8c26-5ecc8502e727") ) (segment @@ -32846,7 +36734,7 @@ (end 195.07915 48.3231) (width 0.2) (layer "F.Cu") - (net "BLED1") + (net "/BLED1") (uuid "3099bffd-7a9f-47b5-926a-b72283f0d3ca") ) (segment @@ -32854,7 +36742,7 @@ (end 195.07915 44.4356) (width 0.2) (layer "F.Cu") - (net "BLED1") + (net "/BLED1") (uuid "65d0b9ca-99ad-4d47-af23-df3b747971db") ) (segment @@ -32862,7 +36750,7 @@ (end 94.44715 109.1666) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "1dddbd37-446c-41f8-897e-b76f5deaba68") ) (segment @@ -32870,7 +36758,7 @@ (end 93.06665 114.6731) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "38d8c9a7-d62f-4cf3-ab17-3c90450cdaf5") ) (segment @@ -32878,7 +36766,7 @@ (end 92.67785 108.4992) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "4a16c683-b6e7-43cc-a998-3774b6a77977") ) (segment @@ -32886,7 +36774,7 @@ (end 94.44715 110.9426) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "7192efe6-cc8e-4e32-8dfd-aed8f4b9ef16") ) (segment @@ -32894,7 +36782,7 @@ (end 93.77975 108.4992) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "7548b5a0-0610-4299-bb80-23550003680c") ) (segment @@ -32902,7 +36790,7 @@ (end 92.09665 109.0804) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "7bce68e8-a076-4006-be0e-c9cdfc952ae9") ) (segment @@ -32910,7 +36798,7 @@ (end 97.91665 112.3231) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "8b1eb84d-5d2a-469a-b3b6-5080894bf48d") ) (segment @@ -32918,7 +36806,7 @@ (end 93.06665 112.3231) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "9cd0b872-5205-4a33-b0f7-d3bf6a43b9c9") ) (segment @@ -32926,7 +36814,7 @@ (end 93.06665 113.1309) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "c01676f4-d945-4cbb-a83b-198a4402f69d") ) (segment @@ -32934,7 +36822,7 @@ (end 97.10885 113.1309) (width 0.2) (layer "F.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "c7e93256-7a9d-4a66-a8fd-3a584e097a95") ) (via @@ -32942,7 +36830,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "abf7a270-4118-45a3-99ee-177fc2fe7932") ) (via @@ -32950,7 +36838,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "c94ceed9-e2ed-4ed6-b873-37fb4b4daf06") ) (segment @@ -32958,7 +36846,7 @@ (end 108.51385 67.7009) (width 0.2) (layer "B.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "9c77c617-21a7-4dd4-85f0-fc71de1a0a78") ) (segment @@ -32966,7 +36854,7 @@ (end 119.89165 56.3231) (width 0.2) (layer "B.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "cbb65856-a0ea-4e6d-a1e1-c943cc0ac7da") ) (segment @@ -32974,7 +36862,7 @@ (end 92.09665 109.0804) (width 0.2) (layer "In2.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "4d836b81-f075-457d-af3e-12902874db47") ) (segment @@ -32982,7 +36870,7 @@ (end 90.49135 69.4081) (width 0.2) (layer "In2.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "6c50801b-45ae-488c-bd18-f13e271bf8d7") ) (segment @@ -32990,7 +36878,7 @@ (end 90.49135 107.4751) (width 0.2) (layer "In2.Cu") - (net "BAT_SENSE") + (net "/BAT_SENSE") (uuid "bf3de61b-2d19-469b-bb5a-4c81ebe49694") ) (segment @@ -32998,7 +36886,7 @@ (end 163.04165 60.1718) (width 0.2) (layer "F.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "0baac367-f206-4766-ab0b-b986b63ebf85") ) (segment @@ -33006,7 +36894,7 @@ (end 161.64225 61.5712) (width 0.2) (layer "F.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "d2a8af45-ae9a-4092-897e-6b80dca6e5c3") ) (via @@ -33014,7 +36902,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "183bfe0b-c6ea-42c5-8b08-82d30ef779d8") ) (segment @@ -33022,7 +36910,7 @@ (end 123.60705 55.1477) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "08a25f78-2e4c-471f-8b7e-4dd71926c91c") ) (segment @@ -33030,7 +36918,7 @@ (end 136.40165 56.7162) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "53a21604-7d07-4727-abed-bcee53311b3d") ) (segment @@ -33038,7 +36926,7 @@ (end 161.26405 61.9494) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "59e09dc1-18f7-413f-88c9-dbae690dbf94") ) (segment @@ -33046,7 +36934,7 @@ (end 136.40165 55.9591) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "987c147f-12b9-462f-be15-9c6549fa7d82") ) (segment @@ -33054,7 +36942,7 @@ (end 161.64225 61.5712) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "eac2a6f3-6e4f-4257-87ab-6bee89a91c2c") ) (segment @@ -33062,7 +36950,7 @@ (end 141.63485 61.9494) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "ec811836-bf53-4fe9-868e-12b27673610a") ) (segment @@ -33070,7 +36958,7 @@ (end 135.59025 55.1477) (width 0.2) (layer "B.Cu") - (net "PWR_CTRL") + (net "/PWR_CTRL") (uuid "f10c3f49-ffc5-471c-82d8-670ad2e8ea58") ) (segment @@ -33078,7 +36966,7 @@ (end 155.73565 87.8231) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "0472b51d-aaca-4dc3-84c4-dfd918c98fde") ) (segment @@ -33086,7 +36974,7 @@ (end 207.69165 87.8231) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "67c86575-4de3-44f4-803a-34cf329043f9") ) (segment @@ -33094,7 +36982,7 @@ (end 149.37335 81.4608) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "6b178b76-e0cb-4cda-9b4f-c7933ef88c13") ) (segment @@ -33102,7 +36990,7 @@ (end 210.19165 89.1714) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "a82ce5d0-56fe-4c6f-a6ae-98929bd1ead3") ) (segment @@ -33110,7 +36998,7 @@ (end 210.19165 89.1714) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "b365d3ec-825f-4928-882f-8ad847ee8e3c") ) (segment @@ -33118,7 +37006,7 @@ (end 149.37335 81.3231) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "ba3aebd2-b163-401e-b6a0-8f1592aa3028") ) (segment @@ -33126,7 +37014,7 @@ (end 209.03995 89.1714) (width 0.2) (layer "F.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "f797e733-f6c0-4d8f-b741-49bb3daff413") ) (segment @@ -33134,7 +37022,7 @@ (end 124.97165 56.3231) (width 0.2) (layer "In2.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "1738f626-047f-47d7-af3b-de102fa8bb40") ) (segment @@ -33142,7 +37030,7 @@ (end 133.93145 65.2829) (width 0.2) (layer "In2.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "3b777b30-d90b-4e18-b24d-67615076fb79") ) (segment @@ -33150,7 +37038,7 @@ (end 144.02165 73.7063) (width 0.2) (layer "In2.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "491c6be0-a8e5-4c10-8527-60b59be1fa04") ) (segment @@ -33158,7 +37046,7 @@ (end 148.27165 80.2214) (width 0.2) (layer "In2.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "4dd34068-6f26-4246-a989-032089af4d6e") ) (segment @@ -33166,7 +37054,7 @@ (end 144.02165 75.9714) (width 0.2) (layer "In2.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "9bbfaf5b-b724-47a3-b50b-29f692b76e7a") ) (segment @@ -33174,7 +37062,7 @@ (end 135.59825 65.2829) (width 0.2) (layer "In2.Cu") - (net "GNSS_TX") + (net "/GNSS_TX") (uuid "a63842b7-4767-4a72-a676-6e1a2459c76f") ) (segment @@ -33182,7 +37070,7 @@ (end 151.91335 81.3231) (width 0.2) (layer "B.Cu") - (net "GNSS_RX") + (net "/GNSS_RX") (uuid "66f6571d-77b5-46ed-aaac-a5e5b77e9a6c") ) (segment @@ -33190,7 +37078,7 @@ (end 158.41335 87.8231) (width 0.2) (layer "B.Cu") - (net "GNSS_RX") + (net "/GNSS_RX") (uuid "8ae91b51-17d0-4000-bcfd-c8ec6d82cd71") ) (segment @@ -33198,63 +37086,63 @@ (end 151.91335 81.3231) (width 0.2) (layer "B.Cu") - (net "GNSS_RX") + (net "/GNSS_RX") (uuid "b55b1102-878a-40b0-9f83-70658bfe5472") ) - (segment - (start 146.56165 73.708) - (end 146.56165 75.9714) - (width 0.2) - (layer "In2.Cu") - (net "GNSS_RX") - (uuid "114236f1-ba56-48ad-9034-28fa923b5d41") - ) - (segment - (start 134.70895 61.8553) - (end 146.56165 73.708) - (width 0.2) - (layer "In2.Cu") - (net "GNSS_RX") - (uuid "45b5e087-9167-42b3-88d6-3f3eb25cc2b6") - ) (segment (start 127.51165 56.3231) (end 133.04385 61.8553) (width 0.2) (layer "In2.Cu") - (net "GNSS_RX") - (uuid "489c9bfa-925b-44a6-81be-edeaf1efb4d8") + (net "/GNSS_RX") + (uuid "36727964-a570-4010-b914-2497d5049d40") + ) + (segment + (start 146.56165 73.51165) + (end 146.56165 75.9714) + (width 0.2) + (layer "In2.Cu") + (net "/GNSS_RX") + (uuid "4b179af7-6e33-4f8f-ae98-2f11eee81d27") + ) + (segment + (start 150.81165 80.2214) + (end 150.81165 81.3231) + (width 0.2) + (layer "In2.Cu") + (net "/GNSS_RX") + (uuid "77f2fd4e-aa30-4c79-9d9f-05b811b23b8d") ) (segment (start 146.56165 75.9714) (end 150.81165 80.2214) (width 0.2) (layer "In2.Cu") - (net "GNSS_RX") - (uuid "501fb4cb-590b-4876-aa50-d86420ffa334") + (net "/GNSS_RX") + (uuid "d895c5a3-2ddd-4aa6-827a-7908a0921aa8") ) (segment - (start 150.81165 81.3231) - (end 150.81165 80.2214) + (start 134.9053 61.8553) + (end 146.56165 73.51165) (width 0.2) (layer "In2.Cu") - (net "GNSS_RX") - (uuid "b7d366af-eb32-4f99-848e-b71587f7a280") + (net "/GNSS_RX") + (uuid "ebea5f6a-7e81-43f0-9066-0a4f55adf021") ) (segment (start 133.04385 61.8553) - (end 134.70895 61.8553) + (end 134.9053 61.8553) (width 0.2) (layer "In2.Cu") - (net "GNSS_RX") - (uuid "c10bcec0-e338-4f1d-a362-e0e495f96ba4") + (net "/GNSS_RX") + (uuid "feee1b7c-8575-4eb7-af87-04ff30f7eff4") ) (segment (start 95.41665 116.3231) (end 98.32475 113.415) (width 0.2) (layer "F.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "47141b52-435a-47e8-a6d2-92a4406e7b20") ) (segment @@ -33262,7 +37150,7 @@ (end 106.83195 111.5828) (width 0.2) (layer "F.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "537a5bcc-10f2-48d5-a55c-7180021341be") ) (segment @@ -33270,7 +37158,7 @@ (end 103.74165 112.3231) (width 0.2) (layer "F.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "714af321-73ab-4123-8fd2-081b0133ddf7") ) (segment @@ -33278,7 +37166,7 @@ (end 103.74165 112.3231) (width 0.2) (layer "F.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "97ff8f58-34d3-4e16-a907-00e459a46785") ) (segment @@ -33286,7 +37174,7 @@ (end 102.64975 113.415) (width 0.2) (layer "F.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "d0c48968-7700-4b60-ab9a-dea3e67322f0") ) (via @@ -33294,7 +37182,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "8b7dfb6a-cfcd-4817-b6ed-dc3bbcc6a9ee") ) (via @@ -33302,7 +37190,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "bf085567-cc8a-499f-aee3-ed636c7a89d5") ) (segment @@ -33310,7 +37198,7 @@ (end 115.96215 70.4126) (width 0.2) (layer "B.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "02a4dcdb-bd4c-40b5-9fdf-c44cc413d44e") ) (segment @@ -33318,7 +37206,7 @@ (end 94.23825 70.4126) (width 0.2) (layer "B.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "c2cd414d-4556-4258-92c1-c599474be45d") ) (segment @@ -33326,7 +37214,7 @@ (end 92.76485 71.886) (width 0.2) (layer "In2.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "28ffb0d7-ca1d-45cf-8373-2bd1d1aef77f") ) (segment @@ -33334,7 +37222,7 @@ (end 92.76485 97.5929) (width 0.2) (layer "In2.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "67153724-f691-4009-b90d-88718cae8565") ) (segment @@ -33342,7 +37230,7 @@ (end 106.83195 111.5828) (width 0.2) (layer "In2.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "9983c646-843d-4952-8cdd-fc5145562e11") ) (segment @@ -33350,7 +37238,7 @@ (end 106.75475 111.5828) (width 0.2) (layer "In2.Cu") - (net "5V_SENSE") + (net "/5V_SENSE") (uuid "f32bbaf3-33ea-40e4-9d4a-ae0f0f50eff0") ) (segment @@ -33466,7 +37354,7 @@ (uuid "f475f4e6-e27e-4404-93a2-1d9778f2b3ed") ) (via - (at 92.92935 68.6118) + (at 93.85 69.3) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -33481,45 +37369,21 @@ (net "EXT_LED") (uuid "930ad34d-c5de-4284-a4b9-7576e837632d") ) - (segment - (start 109.24105 68.6118) - (end 121.04335 56.8095) - (width 0.2) - (layer "B.Cu") - (net "EXT_LED") - (uuid "46d70029-f971-404b-8dc0-5db1511332f0") - ) (segment (start 138.63155 54.743) (end 140.21165 56.3231) (width 0.2) (layer "B.Cu") (net "EXT_LED") - (uuid "5e6527f8-2916-422f-94d3-c1f5da6e4942") + (uuid "2d2f9b79-7e44-49ed-9b59-6ac7db47f4cf") ) (segment - (start 92.92935 68.6118) - (end 109.24105 68.6118) + (start 93.85 69.3) + (end 95 68.15) (width 0.2) (layer "B.Cu") (net "EXT_LED") - (uuid "8a062412-644e-4b91-9278-b2d498284075") - ) - (segment - (start 122.30915 54.743) - (end 138.63155 54.743) - (width 0.2) - (layer "B.Cu") - (net "EXT_LED") - (uuid "9c38153e-91cb-4069-8d76-2e201d779582") - ) - (segment - (start 121.04335 56.8095) - (end 121.04335 56.0088) - (width 0.2) - (layer "B.Cu") - (net "EXT_LED") - (uuid "cc729582-205d-43e4-97a9-d6d9f3535067") + (uuid "a57dc819-8e59-4ea6-8cb7-47608451066c") ) (segment (start 121.04335 56.0088) @@ -33527,30 +37391,70 @@ (width 0.2) (layer "B.Cu") (net "EXT_LED") - (uuid "e47eb3ff-0a17-43a8-9e89-f68802c2f25a") + (uuid "aeb8135b-1af6-4048-9b29-132be9738303") ) (segment - (start 91.09675 104.0595) + (start 122.30915 54.743) + (end 138.63155 54.743) + (width 0.2) + (layer "B.Cu") + (net "EXT_LED") + (uuid "c37054ec-379b-497f-acea-a66840aeeed1") + ) + (segment + (start 121.04335 56.8095) + (end 121.04335 56.0088) + (width 0.2) + (layer "B.Cu") + (net "EXT_LED") + (uuid "c3c76d87-c024-4ff2-8cac-7dcf46833085") + ) + (segment + (start 109.70285 68.15) + (end 121.04335 56.8095) + (width 0.2) + (layer "B.Cu") + (net "EXT_LED") + (uuid "e02b2906-c9a2-413b-b79b-eb6f4227ee50") + ) + (segment + (start 95 68.15) + (end 109.70285 68.15) + (width 0.2) + (layer "B.Cu") + (net "EXT_LED") + (uuid "e63eceff-d353-4084-bd91-3dcafcc4384b") + ) + (segment + (start 91.09675 70.4444) + (end 91.09675 104.0595) + (width 0.2) + (layer "In2.Cu") + (net "EXT_LED") + (uuid "2538b607-41f8-4fcd-99be-3d9f8a6d622f") + ) + (segment + (start 92.24115 69.3) (end 91.09675 70.4444) (width 0.2) (layer "In2.Cu") (net "EXT_LED") - (uuid "8bb9eb20-0bc6-4aa5-a3a1-084abd59960f") + (uuid "ac5fd6c6-75ba-4993-a7a8-8c1e7226a419") ) (segment - (start 91.09675 70.4444) - (end 92.92935 68.6118) + (start 93.85 69.3) + (end 92.24115 69.3) (width 0.2) (layer "In2.Cu") (net "EXT_LED") - (uuid "f7b24ba4-155b-4e2f-9f26-57480b31db86") + (uuid "f293c354-7997-4ce7-8336-c02e5e7f54f2") ) (segment (start 115.74165 112.3231) (end 118.14165 112.3231) (width 0.2) (layer "F.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "7bbe1152-fd12-4737-ad93-c5ef7b2ec214") ) (segment @@ -33558,7 +37462,7 @@ (end 121.71555 108.7492) (width 0.2) (layer "F.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "8cbe7c9b-09a5-4dd3-87e1-e1a4abbf6676") ) (segment @@ -33566,7 +37470,7 @@ (end 164.39925 108.7492) (width 0.2) (layer "F.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "bb7c700e-6e85-4ea8-a1a6-ba49897125a1") ) (via @@ -33574,7 +37478,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "13fa191e-e089-46d3-a3a2-2b9c4a83b235") ) (via @@ -33582,7 +37486,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "98913c5c-c239-4ff0-ab19-0e3ca4a0b687") ) (segment @@ -33590,7 +37494,7 @@ (end 176.97315 121.3231) (width 0.2) (layer "B.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "3b81215a-de33-4202-8d5d-9f4f26e7ba0a") ) (segment @@ -33598,7 +37502,7 @@ (end 169.73725 114.0872) (width 0.2) (layer "B.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "d70fea02-0f80-4d17-b0b0-ad4dbe691e09") ) (segment @@ -33606,7 +37510,7 @@ (end 152.45485 97.2489) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "01ff517a-dc5a-426b-bab5-e6235412e912") ) (segment @@ -33614,7 +37518,7 @@ (end 153.25155 97.6015) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "07d4a058-7579-4d5f-b88f-0d5934058bf5") ) (segment @@ -33622,7 +37526,7 @@ (end 142.75165 67.1231) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "391447a5-42f8-4058-8594-c8b1ac3299d1") ) (segment @@ -33630,7 +37534,7 @@ (end 152.80745 97.6015) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "4c4e1dcd-bdac-4c1b-a977-f7b5072148b4") ) (segment @@ -33638,7 +37542,7 @@ (end 149.10165 73.4731) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "65fba380-22d4-47a3-99e8-79f2c522496b") ) (segment @@ -33646,7 +37550,7 @@ (end 149.10165 75.8981) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "6eeed25e-c8e9-4877-a9c4-dd6ce6a7d8fb") ) (segment @@ -33654,7 +37558,7 @@ (end 152.17745 78.9739) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "8fa632ff-9bb4-4c60-a32e-cc20179013c5") ) (segment @@ -33662,7 +37566,7 @@ (end 164.39925 108.7492) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "9efa364f-9087-42af-aa5e-84d57a22c833") ) (segment @@ -33670,7 +37574,7 @@ (end 152.17745 95.0374) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "aaf7beaf-299e-40a5-b2d2-20de139e74e1") ) (segment @@ -33678,7 +37582,7 @@ (end 152.45485 95.3148) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "f30833e6-7b00-4a32-a76f-83aeae6c52e7") ) (segment @@ -33686,7 +37590,7 @@ (end 164.39925 108.7492) (width 0.2) (layer "In2.Cu") - (net "NTC_TEMP") + (net "/NTC_TEMP") (uuid "f461146f-0343-499e-943c-a918c433ad1d") ) (segment @@ -33874,28 +37778,20 @@ (uuid "08eba743-8d17-4499-906c-3c1b97003682") ) (segment - (start 130.49275 118.3001) - (end 130.90415 118.3001) + (start 124.89165 118.7231) + (end 125.44335 118.7231) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "09a2ff75-9cc6-460f-b6f1-f3a1ad9d63c8") + (uuid "0f994bbb-c1e4-4683-b3ed-ebe726692ef5") ) (segment - (start 130.49455 118.3231) - (end 130.19165 118.626) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "0e791e2d-f0cd-498c-ba6d-af375e337e77") - ) - (segment - (start 130.26465 118.072) + (start 130.51575 118.3231) (end 130.49275 118.3001) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "127ec3a7-0807-4b31-8f7b-e930e75a070f") + (uuid "108c70e2-7e79-4f7e-a4f4-e8c4bd0e3493") ) (segment (start 117.79165 129.5831) @@ -33905,14 +37801,6 @@ (net "3V3") (uuid "156629b0-55df-4f7f-8e6b-870826a55945") ) - (segment - (start 131.31555 118.3001) - (end 132.14165 117.474) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "2321c5df-dec2-44d0-ad4a-22db5e225280") - ) (segment (start 117.79165 128.4814) (end 124.33995 121.9331) @@ -33921,6 +37809,14 @@ (net "3V3") (uuid "291e4abe-06e0-48bb-bf27-d45e4b0d0d9c") ) + (segment + (start 131.6999 118.3001) + (end 131.8 118.2) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "2d312662-dbd7-4130-97f6-890ff9b6077b") + ) (segment (start 114.09165 112.3231) (end 114.86935 113.1008) @@ -33929,6 +37825,14 @@ (net "3V3") (uuid "2f828363-8c1e-4807-9af7-e10fe8859d88") ) + (segment + (start 130.19165 118.6012) + (end 130.49275 118.3001) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "322178f8-13e5-4536-9e98-44cbbc13aa77") + ) (segment (start 93.54165 83.3231) (end 93.54165 83.7941) @@ -33937,6 +37841,14 @@ (net "3V3") (uuid "33bf102f-10a8-4d9a-a3e2-a726a31f3b85") ) + (segment + (start 132.14165 117.474) + (end 132.14165 113.1472) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "3966c0d5-c9cb-4354-a56b-54ff9323a7bc") + ) (segment (start 98.19165 46.3231) (end 94.58435 46.3231) @@ -33954,12 +37866,12 @@ (uuid "40dbb8c1-051d-4f77-a3d0-97bc33a8ea36") ) (segment - (start 128.09165 112.3231) - (end 130.26465 114.4961) + (start 130.90415 118.3231) + (end 130.51575 118.3231) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "47e15456-8b85-4434-954a-111393d00704") + (uuid "48957869-d2f1-4c01-acbe-151cf99f2671") ) (segment (start 93.54165 83.7941) @@ -33969,6 +37881,22 @@ (net "3V3") (uuid "49e6b544-01b8-4f92-a735-c6411855772c") ) + (segment + (start 130.19165 119.0042) + (end 130.19165 118.6012) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "4bb114fd-8f9d-438b-ba4f-801a166dbef2") + ) + (segment + (start 129.87065 119.3252) + (end 130.19165 119.0042) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "4ff42d10-9a1a-4137-af68-11ea99263ed1") + ) (segment (start 123.31395 113.1008) (end 124.09165 112.3231) @@ -33978,12 +37906,12 @@ (uuid "559cc540-8186-4bc4-aa16-ebfd7933d56d") ) (segment - (start 130.19165 118.626) - (end 130.19165 119.0042) + (start 131.6999 118.3001) + (end 130.92715 118.3001) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "5a2b0b07-07e5-42ca-865b-933eaad47e49") + (uuid "6153e0c1-1843-4f0e-ab83-d8545b0dbd9a") ) (segment (start 100.07515 102.3566) @@ -33994,12 +37922,20 @@ (uuid "618b4cbc-46e7-4c76-849c-9aec2cf44e71") ) (segment - (start 130.19165 119.0042) - (end 129.87065 119.3252) + (start 131.8 118.2) + (end 131.8 117.81565) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "72e58076-1bec-4c4a-9452-969a74ca668c") + (uuid "7835b62e-7ae8-429f-8666-9077f0203645") + ) + (segment + (start 125.44335 118.7231) + (end 126.04545 119.3252) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "7c10072f-a3c2-4bf6-965f-84b7e8de26f1") ) (segment (start 132.14165 113.1472) @@ -34026,12 +37962,28 @@ (uuid "8af03635-9b6b-4149-bac5-bfeb5c3c5f02") ) (segment - (start 126.04545 119.3252) - (end 125.44335 118.7231) + (start 130.49275 118.3001) + (end 130.25 118.05735) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "9168f1e1-7a40-4495-a367-b15f8d1d9d22") + (uuid "8d8a39b8-b39f-40a8-a34f-d4eae06f152c") + ) + (segment + (start 130.25 114.48145) + (end 128.09165 112.3231) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "90a85abf-c6d0-4dae-bb6f-b1b7fdab7334") + ) + (segment + (start 130.25 118.05735) + (end 130.25 114.48145) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "90f80d71-9d0d-447d-9d6f-9adf0c2dbf98") ) (segment (start 136.14165 112.3231) @@ -34073,14 +38025,6 @@ (net "3V3") (uuid "b32348e1-5a2a-4db3-bfa1-b31181099f6f") ) - (segment - (start 129.87065 119.3252) - (end 126.04545 119.3252) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "bff94960-9d4b-4951-bc0e-272b15c76431") - ) (segment (start 125.09345 111.0793) (end 124.09165 112.0811) @@ -34090,20 +38034,12 @@ (uuid "c6ece1c1-c68c-413d-bec5-71947444d1ec") ) (segment - (start 130.90415 118.3231) - (end 130.49455 118.3231) + (start 126.04545 119.3252) + (end 129.87065 119.3252) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "c9434e16-b15f-41ed-b745-dd2fbdc67d24") - ) - (segment - (start 132.14165 117.474) - (end 132.14165 113.1472) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "d2365b51-b2b7-478e-880a-d86f69cc7b59") + (uuid "cb10cbe4-fb5e-44e1-8fdf-61140f12ea77") ) (segment (start 114.86935 113.1008) @@ -34122,20 +38058,12 @@ (uuid "de8ed71a-ab23-4029-bc42-0a5c7f00ed6e") ) (segment - (start 130.26465 114.4961) - (end 130.26465 118.072) + (start 131.8 117.81565) + (end 132.14165 117.474) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "dfb31b99-544f-4374-8bb1-cd097edd75e0") - ) - (segment - (start 130.90415 118.3001) - (end 131.31555 118.3001) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "e400addf-502e-436a-a925-8fcdefb4d86c") + (uuid "e3687c1e-bf6e-4ab2-b676-613d40c4d2db") ) (segment (start 124.33995 121.9331) @@ -34146,12 +38074,12 @@ (uuid "e4205e4e-eae9-46cc-9e39-18833ea343e4") ) (segment - (start 124.89165 118.7231) - (end 125.44335 118.7231) + (start 130.92715 118.3001) + (end 130.90415 118.3231) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "ee778fdf-93a5-44f7-899c-bceca1fe0b42") + (uuid "fbda44b6-86a6-4b09-8f26-a5db7d7aec0f") ) (segment (start 132.14165 111.3182) @@ -34297,14 +38225,6 @@ (net "3V3") (uuid "41a04279-c895-4cc1-ad40-5c01aa58e9dd") ) - (segment - (start 97.09265 71.7422) - (end 90.24795 64.8975) - (width 0.2) - (layer "In2.Cu") - (net "3V3") - (uuid "567c460c-160d-4684-afb9-f4080493e807") - ) (segment (start 152.09215 54.6026) (end 155.36205 54.6026) @@ -34314,20 +38234,20 @@ (uuid "5a50efc5-6954-4ce2-a841-c9f8b74e511c") ) (segment - (start 94.14915 76.3622) - (end 97.09265 73.4187) + (start 97.09265 73.4187) + (end 97.09265 71.39265) (width 0.2) (layer "In2.Cu") (net "3V3") - (uuid "61f9e5d2-83cd-4f59-84d4-2db9a124816f") + (uuid "5ccec12e-e2b1-458f-9ccc-b60613e346b2") ) (segment - (start 94.14915 84.4016) - (end 94.14915 76.3622) + (start 90.24795 64.54795) + (end 90.24795 50.6595) (width 0.2) (layer "In2.Cu") (net "3V3") - (uuid "65e7dca5-8381-4fef-b2f6-0bfbc41b5f54") + (uuid "60addd07-89d8-4c71-b67b-7841c5d4c53d") ) (segment (start 152.67915 94.5225) @@ -34345,6 +38265,14 @@ (net "3V3") (uuid "6cdb5d5d-73d1-494f-bde1-2c40c68b192f") ) + (segment + (start 97.09265 71.39265) + (end 90.24795 64.54795) + (width 0.2) + (layer "In2.Cu") + (net "3V3") + (uuid "6d78ee18-789a-4543-bf29-a4ae17d9a5a8") + ) (segment (start 153.05655 94.8999) (end 153.05655 96.9998) @@ -34353,14 +38281,6 @@ (net "3V3") (uuid "780399a0-44c2-4df5-8a50-209476a6c5c9") ) - (segment - (start 90.24795 64.8975) - (end 90.24795 50.6595) - (width 0.2) - (layer "In2.Cu") - (net "3V3") - (uuid "87b330f8-8423-46a7-8ecc-2b1f933c2d17") - ) (segment (start 117.79165 129.5831) (end 117.79165 120.918) @@ -34393,6 +38313,14 @@ (net "3V3") (uuid "9a4d1dce-56af-4656-bf8a-474493595ba4") ) + (segment + (start 90.24795 50.6595) + (end 94.58435 46.3231) + (width 0.2) + (layer "In2.Cu") + (net "3V3") + (uuid "a7d16a85-caad-4a41-8242-e9975ce17305") + ) (segment (start 117.79165 120.918) (end 99.19675 102.3231) @@ -34401,14 +38329,6 @@ (net "3V3") (uuid "b0570648-8a04-45dd-8216-b278e18f9a1a") ) - (segment - (start 90.24795 50.6595) - (end 94.58435 46.3231) - (width 0.2) - (layer "In2.Cu") - (net "3V3") - (uuid "b518a52c-7556-454a-9fa8-a9b804f3662e") - ) (segment (start 98.62875 102.3231) (end 99.12605 102.3231) @@ -34457,6 +38377,14 @@ (net "3V3") (uuid "ce4d5e56-24d7-42a5-a51a-30d64e833ac6") ) + (segment + (start 94.14915 84.4016) + (end 94.14915 76.3622) + (width 0.2) + (layer "In2.Cu") + (net "3V3") + (uuid "d0e966e3-6eee-469b-be5d-7e3c96b47129") + ) (segment (start 156.33025 60.9594) (end 156.33025 61.2934) @@ -34482,12 +38410,12 @@ (uuid "e38a898d-2ddb-40ea-9f4e-d839b6e6494b") ) (segment - (start 97.09265 73.4187) - (end 97.09265 71.7422) + (start 94.14915 76.3622) + (end 97.09265 73.4187) (width 0.2) (layer "In2.Cu") (net "3V3") - (uuid "e69c45cd-5d1f-4945-9b6d-24986fef20ae") + (uuid "f7e136ca-6cb5-4c71-a8a5-ba4323fe9d54") ) (segment (start 132.14165 104.8739) @@ -34502,7 +38430,7 @@ (end 187.19165 114.8231) (width 0.2) (layer "F.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "129d577f-3aa7-4d15-a431-52d3331d34cc") ) (segment @@ -34510,7 +38438,7 @@ (end 187.00365 114.6351) (width 0.2) (layer "F.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "6c5efd2b-601e-49de-a11c-920cb44a38e5") ) (segment @@ -34518,7 +38446,7 @@ (end 180.98475 116.7912) (width 0.2) (layer "F.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "a156906f-f6c2-4a87-923a-6816191be7d3") ) (segment @@ -34526,7 +38454,7 @@ (end 185.10265 116.7912) (width 0.2) (layer "F.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "f7a645b0-8c61-4926-b613-8d9b3fc1c229") ) (via @@ -34534,7 +38462,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "87c4cb30-489d-4d38-9556-a5d00b038cfa") ) (via @@ -34542,7 +38470,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "a99b2e3f-f487-481e-8480-cafc278604e8") ) (segment @@ -34550,7 +38478,7 @@ (end 185.10265 114.7842) (width 0.2) (layer "In2.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "2f6dd143-f6dd-4037-86bc-cc07b8f15281") ) (segment @@ -34558,7 +38486,7 @@ (end 185.10265 116.7912) (width 0.2) (layer "In2.Cu") - (net "COMP3_C") + (net "/COMP3_C") (uuid "dbc13e8c-33e4-4584-b5b0-d446ff61247d") ) (segment @@ -34566,23 +38494,15 @@ (end 130.04165 104.3231) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "02bda8db-87e9-4fcf-af97-8992237254e1") ) - (segment - (start 139.93805 98.5982) - (end 142.01125 96.525) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "1098b94c-f67f-43d8-8ea0-9cec3fcd7288") - ) (segment (start 121.30505 101.9853) (end 124.69165 101.9853) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "135da364-2a5b-4479-84fb-4c79091484dd") ) (segment @@ -34590,31 +38510,15 @@ (end 118.02425 91.5462) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "13f94a27-b0c8-4541-a7d6-39d719fb299a") ) - (segment - (start 134.04165 91.3231) - (end 134.04165 90.7772) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "144ca110-06e8-4a31-938e-583c4de80436") - ) - (segment - (start 139.81865 99.8231) - (end 139.93805 99.8231) - (width 1.0498) - (layer "F.Cu") - (net "MAIN5V") - (uuid "1b078f3f-17a3-4cab-8b75-2351bfded75b") - ) (segment (start 138.62195 101.2928) (end 132.64185 101.2928) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "1c66f432-b0d1-4ea4-b442-9ef8b6aabb26") ) (segment @@ -34622,15 +38526,15 @@ (end 112.72015 89.2327) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "1cc347e9-e272-4720-9765-32d3d0dfd35c") ) (segment (start 142.69165 96.525) (end 142.69165 94.8231) - (width 1.0498) + (width 1) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "1d9bf885-f803-4d6a-9df5-5cabe5e5cca1") ) (segment @@ -34638,15 +38542,23 @@ (end 110.26085 87.8823) (width 0.601) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "1e5ab64e-87a4-473f-8893-e60a2d9703ba") ) + (segment + (start 134.95115 89.8677) + (end 136.42955 89.8677) + (width 1.5) + (layer "F.Cu") + (net "/MAIN5V") + (uuid "206dee48-1f1f-4af9-a8cf-5feae2fca77b") + ) (segment (start 110.24165 87.8631) (end 110.24165 86.5931) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "22647acb-65b0-442a-ab95-5626b5546c28") ) (segment @@ -34654,31 +38566,23 @@ (end 132.64185 92.7229) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "238fdaa9-6977-4e00-b784-64a598773553") ) (segment - (start 139.54565 100.3691) - (end 139.81865 100.0961) - (width 1.0498) - (layer "F.Cu") - (net "MAIN5V") - (uuid "26be7d7a-d55d-435d-aad7-ab4cfe8c7949") - ) - (segment - (start 134.04165 90.7772) - (end 134.95115 89.8677) + (start 126.42385 91.1898) + (end 133.90835 91.1898) (width 1.5) (layer "F.Cu") - (net "MAIN5V") - (uuid "2d8a72ed-076c-488d-a295-0ec62a7708b6") + (net "/MAIN5V") + (uuid "2597e4c3-43a8-4e8e-bc23-7da37e6db982") ) (segment (start 120.16645 91.0458) (end 119.96685 91.0458) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "349e9922-0169-4482-b0b6-5d7a7d39bf46") ) (segment @@ -34686,39 +38590,15 @@ (end 128.64885 101.9853) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "35b08cfa-8938-4f53-bb6d-18ece58f1ee5") ) - (segment - (start 126.42385 91.1898) - (end 125.64925 91.9644) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "38da8df1-3388-49e0-a143-a35c583bd9d9") - ) - (segment - (start 139.93805 99.8231) - (end 139.93805 98.5982) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "47b59700-b766-4d3f-a218-e5f9606ca3dd") - ) - (segment - (start 136.88495 90.3231) - (end 139.93975 90.3231) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "4a2a7539-c015-4441-a90c-9c03e9e628e4") - ) (segment (start 112.72015 89.2327) (end 112.72015 88.5201) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "4ef6825f-bb38-412b-b870-84ea16a6e39d") ) (segment @@ -34726,7 +38606,7 @@ (end 121.30505 101.9853) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "52f8c891-86e8-49d2-bc9a-b4b93f783389") ) (segment @@ -34734,7 +38614,7 @@ (end 112.08235 87.8823) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "5446a5f2-113d-46dc-a145-69f32591357e") ) (segment @@ -34742,7 +38622,7 @@ (end 124.69165 101.9853) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "5732d77e-bbd3-409d-9bec-a9b8aaa90b30") ) (segment @@ -34750,95 +38630,71 @@ (end 119.79165 92.8231) (width 0.2502) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "57f8e944-ad4b-4dc8-a381-c3037f755576") ) (segment - (start 134.95115 89.8677) - (end 136.42955 89.8677) - (width 1.5) + (start 141.775 96.525) + (end 139.99165 98.30835) + (width 1) (layer "F.Cu") - (net "MAIN5V") - (uuid "59e91aaa-28e2-4d5b-a7af-6a3526bbe0da") - ) - (segment - (start 139.81865 100.0961) - (end 139.81865 99.8231) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "5b4fd94f-b917-4911-9f25-e78dba425b76") + (net "/MAIN5V") + (uuid "59842b4b-eb15-47b7-bb60-3220f60602a8") ) (segment (start 119.19165 104.3231) (end 119.19165 104.0987) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "6d4fdab6-58b8-4f3c-af7f-4a8c31627565") ) - (segment - (start 134.04165 91.3231) - (end 133.90835 91.1898) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "8d023f7f-b861-42cd-87ae-66e7a02b160f") - ) (segment (start 132.64185 101.2928) (end 132.12695 101.2928) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "8deb6e93-a59c-46bb-ae41-dee701082c56") ) (segment - (start 139.54565 100.3691) - (end 138.62195 101.2928) + (start 133.90835 90.9105) + (end 134.95115 89.8677) (width 1.5) (layer "F.Cu") - (net "MAIN5V") - (uuid "922094f2-bc3c-497a-9500-f9f288966de6") + (net "/MAIN5V") + (uuid "a2d9ee06-084d-415a-8605-88f043f51c3c") ) (segment - (start 136.42955 89.8677) - (end 136.88495 90.3231) - (width 1.5) + (start 136.88495 90.3231) + (end 140.09165 90.3231) + (width 1) (layer "F.Cu") - (net "MAIN5V") - (uuid "97b3c7be-eaf9-4f88-9aad-a77ba0efa6a0") + (net "/MAIN5V") + (uuid "a915af85-e3eb-4ce1-bf35-1debf069cb07") ) (segment - (start 133.90835 91.1898) + (start 125.64925 91.9644) (end 126.42385 91.1898) (width 1.5) (layer "F.Cu") - (net "MAIN5V") - (uuid "a323fb58-3921-4553-a4ad-15960c57cd5d") + (net "/MAIN5V") + (uuid "a9c386a6-c85f-456d-bba5-fd33d3735475") ) (segment (start 132.12695 101.2928) (end 130.04165 103.3781) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "b2fe1c9e-75c3-44fb-8490-21b57df811db") ) - (segment - (start 139.93805 99.8231) - (end 140.09165 99.8231) - (width 1.0498) - (layer "F.Cu") - (net "MAIN5V") - (uuid "b4a87b82-b41b-450d-b793-8289f69292ae") - ) (segment (start 128.64885 101.9853) (end 130.04165 103.3781) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "b566dff4-235d-461e-94df-47c887ab2fcd") ) (segment @@ -34846,31 +38702,39 @@ (end 119.46645 92.4979) (width 0.2502) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "b9a37a6c-6fce-4535-b2e2-dc580ff6621b") ) (segment - (start 139.93975 90.3231) - (end 140.09165 90.3231) - (width 1.0498) + (start 140.09165 99.8231) + (end 138.62195 101.2928) + (width 1) (layer "F.Cu") - (net "MAIN5V") - (uuid "bdea6dc3-d3b1-454e-a646-8af929061e05") + (net "/MAIN5V") + (uuid "ba6680c7-1839-40a6-88c8-dffb46354f2b") ) (segment (start 119.96685 91.0458) (end 119.46645 91.5462) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "bed078c8-78b7-4905-8ebe-248ca064282a") ) + (segment + (start 133.90835 91.1898) + (end 133.90835 90.9105) + (width 1.5) + (layer "F.Cu") + (net "/MAIN5V") + (uuid "c0499fe4-654c-4edc-8905-3a1ba8fe89f9") + ) (segment (start 120.16645 91.0458) (end 120.16645 91.2979) (width 0.2502) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "c9ce0de8-5e1e-47da-a0a6-f8deb43fcffb") ) (segment @@ -34878,7 +38742,7 @@ (end 110.24165 87.8631) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "cd04e3ce-7f08-43a2-9089-da5b5d9704c7") ) (segment @@ -34886,23 +38750,39 @@ (end 115.03365 91.5462) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "d56e6a8c-e67d-4daa-845c-940de7777708") ) + (segment + (start 139.99165 98.30835) + (end 139.99165 99.8231) + (width 1) + (layer "F.Cu") + (net "/MAIN5V") + (uuid "d687b478-eb75-4afc-871e-4e50b5580219") + ) (segment (start 110.24165 86.5931) (end 110.24165 85.3231) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "d99a04bd-f102-4823-945b-36248ae2294d") ) + (segment + (start 142.69165 96.525) + (end 141.775 96.525) + (width 1) + (layer "F.Cu") + (net "/MAIN5V") + (uuid "db7b8b5d-25f2-4b5d-8a3d-4ac91924a789") + ) (segment (start 118.02425 91.8081) (end 118.02425 91.5462) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "ddc4df78-4a2d-44e9-a682-9ec133c12bae") ) (segment @@ -34910,15 +38790,23 @@ (end 134.04165 91.3231) (width 1.5) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "df91a92c-bb3f-44bc-be08-b1f99c7af26b") ) + (segment + (start 136.42955 89.8677) + (end 136.88495 90.3231) + (width 1.5) + (layer "F.Cu") + (net "/MAIN5V") + (uuid "e0c10ff3-3696-4cb7-a0d1-778c8e0b2bd2") + ) (segment (start 120.16645 91.2979) (end 120.74165 91.8731) (width 0.2502) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "e514bcfe-475a-42b2-8364-249ff178b6ed") ) (segment @@ -34926,23 +38814,15 @@ (end 110.25125 87.8727) (width 0.601) (layer "F.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "e806e4e5-83d9-430a-b78a-8257994270bf") ) - (segment - (start 142.01125 96.525) - (end 142.69165 96.525) - (width 1.5) - (layer "F.Cu") - (net "MAIN5V") - (uuid "efa8830d-a16c-48a1-ad84-8719b7575501") - ) (via (at 125.64925 91.9644) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "44e74a26-0723-405d-94c0-7babcf7dc616") ) (via @@ -34950,7 +38830,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "76fb3461-3d2a-4c8f-a1b2-85ee5da5499f") ) (via @@ -34958,7 +38838,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "da6348bd-db4c-439e-94cb-10d953ed7d2e") ) (segment @@ -34966,7 +38846,7 @@ (end 118.02425 91.8081) (width 1.5) (layer "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "12d328cf-d633-4250-a2ca-1cbb976f2d00") ) (segment @@ -34974,7 +38854,7 @@ (end 101.51575 81.1989) (width 1.5) (layer "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "32fd88ca-fb9e-4c80-87bf-fd5a794f1e81") ) (segment @@ -34982,7 +38862,7 @@ (end 103.28765 82.9708) (width 1.5) (layer "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "82577d2f-aece-4d80-b17d-9a118a77e8ee") ) (segment @@ -34990,7 +38870,7 @@ (end 104.47165 83.5962) (width 1.5) (layer "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "bd404866-c4d0-4a76-a981-992cba928515") ) (segment @@ -34998,7 +38878,7 @@ (end 109.81235 83.5962) (width 1.5) (layer "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "ec43032a-42e0-46e2-950d-2eca6f22196b") ) (segment @@ -35006,7 +38886,7 @@ (end 103.84625 82.9708) (width 1.5) (layer "B.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "fc1215bb-1146-4659-88b9-2b9d4706888d") ) (segment @@ -35014,7 +38894,7 @@ (end 135.79165 46.3231) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "09146c0d-bc27-4b98-85fc-bfee77417d3d") ) (segment @@ -35022,7 +38902,7 @@ (end 125.61845 91.9952) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "20b812b4-4bd5-4ddb-a3f4-280c72a5be13") ) (segment @@ -35030,7 +38910,7 @@ (end 96.37475 57.9404) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "3cef4d67-b726-49b0-a6bb-0459de458928") ) (segment @@ -35038,7 +38918,7 @@ (end 125.61845 92.0866) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "6d0a3152-5574-4f16-970d-2446c59538fc") ) (segment @@ -35046,7 +38926,7 @@ (end 125.12565 92.5794) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "7d2109bf-4193-4a92-a118-29aabfe49cdf") ) (segment @@ -35054,7 +38934,7 @@ (end 98.78455 42.6666) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "848510b2-89a5-4149-8d45-93240d1f3f3e") ) (segment @@ -35062,7 +38942,7 @@ (end 96.37475 45.0764) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "8b38f731-67ce-40c6-9fdb-056fa6c02c59") ) (segment @@ -35070,7 +38950,7 @@ (end 132.13515 42.6666) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "a7643fc2-fe2f-41a2-a06b-b9bda1b67eb7") ) (segment @@ -35078,7 +38958,7 @@ (end 100.53605 62.1017) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "c6d894e6-1871-43da-b863-7f5626786d05") ) (segment @@ -35086,7 +38966,7 @@ (end 100.53605 76.2004) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "e016bcf2-b6f0-42bf-8af7-e29d8f273f5c") ) (segment @@ -35094,7 +38974,7 @@ (end 125.64925 91.9644) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "fb67b01e-5c94-4afa-abf0-5c3196dc740c") ) (segment @@ -35102,120 +38982,184 @@ (end 118.79555 92.5794) (width 1.5) (layer "In2.Cu") - (net "MAIN5V") + (net "/MAIN5V") (uuid "fb73e0ce-02f7-4052-b90a-736d8b40a83f") ) (segment - (start 153.09345 64.4694) - (end 153.31665 64.6926) + (start 145.4 64.2) + (end 142.15 60.95) (width 0.2) (layer "F.Cu") - (net "SW_IN") - (uuid "235af9f0-34f8-423b-b0c1-4ad319873611") + (net "/SW_IN") + (uuid "2e01eb1d-e151-4240-b0d5-038b0392490e") ) (segment (start 149.32915 46.3231) (end 152.21695 49.2109) (width 0.2) (layer "F.Cu") - (net "SW_IN") + (net "/SW_IN") (uuid "70b7c6f6-ce95-4fcf-b357-923c52646f09") ) (segment - (start 153.31665 64.6926) - (end 153.31665 65.2731) + (start 135.5 61.25) + (end 136.1 61.85) (width 0.2) (layer "F.Cu") - (net "SW_IN") - (uuid "91960386-842f-4dde-915b-b4ddf2411df7") + (net "/SW_IN") + (uuid "c064b895-25f1-4677-a058-ed446e1fdf00") ) (segment (start 152.21695 49.2109) (end 152.21695 51.5505) (width 0.2) (layer "F.Cu") - (net "SW_IN") + (net "/SW_IN") (uuid "ce2ce2e1-db5d-4fff-abab-6f24391f2863") ) + (segment + (start 136.1 61.85) + (end 137.7125 61.85) + (width 0.2) + (layer "F.Cu") + (net "/SW_IN") + (uuid "df7a1648-a627-4f97-a31c-3bbe9359d678") + ) + (segment + (start 153.6 64.2) + (end 145.4 64.2) + (width 0.2) + (layer "F.Cu") + (net "/SW_IN") + (uuid "ebb94d21-b73d-477b-a9c8-dcaa5d62fe8f") + ) (via - (at 153.09345 64.4694) + (at 153.6 64.2) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_IN") + (net "/SW_IN") (uuid "5247b40d-f50a-4092-8a74-d3e82742bb64") ) + (via + (at 135.5 61.25) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/SW_IN") + (uuid "61d82be2-85bd-4069-888c-fbe3d6524712") + ) (via (at 152.21695 51.5505) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_IN") + (net "/SW_IN") (uuid "bfd52e46-d97d-445e-a423-ee0252177f40") ) - (segment - (start 155.09975 62.1711) - (end 156.02055 62.1711) - (width 0.2) - (layer "In2.Cu") - (net "SW_IN") - (uuid "0038e781-c384-4329-95ee-391a2684194b") - ) - (segment - (start 157.04805 61.1436) - (end 157.04805 55.7206) - (width 0.2) - (layer "In2.Cu") - (net "SW_IN") - (uuid "087e6a67-a5c9-49aa-934d-201525105849") + (via + (at 142.15 60.95) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/SW_IN") + (uuid "fbea09b6-1a21-47d7-8450-4371fecc9296") ) (segment (start 155.48705 54.1596) (end 154.82605 54.1596) (width 0.2) (layer "In2.Cu") - (net "SW_IN") - (uuid "5be8e148-2591-4489-ba1a-4be23cfe836a") + (net "/SW_IN") + (uuid "3935aa72-680d-44d4-971f-b90074c7ff71") ) (segment - (start 156.02055 62.1711) - (end 157.04805 61.1436) + (start 155.09975 62.1711) + (end 156.02055 62.1711) (width 0.2) (layer "In2.Cu") - (net "SW_IN") - (uuid "7519f90c-6672-45c0-b54e-cc26dd616878") + (net "/SW_IN") + (uuid "5929ebe3-e5b6-449c-97bc-c9d7c836f6f3") ) (segment - (start 157.04805 55.7206) - (end 155.48705 54.1596) + (start 137.35 63.65) + (end 139.45 63.65) (width 0.2) (layer "In2.Cu") - (net "SW_IN") - (uuid "b701aa06-9a2d-4cea-ae86-369fbf046b15") + (net "/SW_IN") + (uuid "74602f62-46d2-45c6-8b7f-993341f03781") ) (segment - (start 153.09345 64.4694) - (end 153.09345 64.1774) + (start 153.6 64.2) + (end 153.6 63.67085) (width 0.2) (layer "In2.Cu") - (net "SW_IN") - (uuid "de188903-03a4-4dfc-9662-4347ea57f423") - ) - (segment - (start 153.09345 64.1774) - (end 155.09975 62.1711) - (width 0.2) - (layer "In2.Cu") - (net "SW_IN") - (uuid "e9027548-e24c-42bc-af20-58a17e85e6ce") + (net "/SW_IN") + (uuid "7d3b60d6-c24f-4e8c-b3a4-d27d5474a15e") ) (segment (start 154.82605 54.1596) (end 152.21695 51.5505) (width 0.2) (layer "In2.Cu") - (net "SW_IN") - (uuid "f9700edc-189a-48fc-a156-3f0e9b2aad09") + (net "/SW_IN") + (uuid "8b93dd17-dc7e-4681-8280-430582f9dc8e") + ) + (segment + (start 157.04805 61.1436) + (end 157.04805 55.7206) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "96701017-9f6e-44a4-b0b5-eccafaf4bd5d") + ) + (segment + (start 139.45 63.65) + (end 142.15 60.95) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "9bbd0048-26fc-444b-a55a-3a598457fe5d") + ) + (segment + (start 156.02055 62.1711) + (end 157.04805 61.1436) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "9ce64194-bb08-43e3-91f1-017f7c9a8de6") + ) + (segment + (start 135.5 61.8) + (end 137.35 63.65) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "bcb44928-e595-4ec1-986a-f29c03b5a816") + ) + (segment + (start 153.6 63.67085) + (end 155.09975 62.1711) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "c45e4aab-4ecf-4fed-84ee-ae834ae1e9b9") + ) + (segment + (start 157.04805 55.7206) + (end 155.48705 54.1596) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "cbd70a9d-a66a-46f5-bda6-e443ceef8a2e") + ) + (segment + (start 135.5 61.25) + (end 135.5 61.8) + (width 0.2) + (layer "In2.Cu") + (net "/SW_IN") + (uuid "d8702d40-5de8-4321-8bbf-d6f9296f1064") ) (segment (start 99.33595 93.3538) @@ -35294,7 +39238,7 @@ (end 124.73165 94.9231) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "178a58bb-300d-4a5c-8e13-8b92d0589af1") ) (segment @@ -35302,7 +39246,7 @@ (end 124.83165 95.0231) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "3235d512-d5e4-44d7-a257-62d9035e3a50") ) (segment @@ -35310,7 +39254,7 @@ (end 113.05675 91.3737) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "43773fc4-3a68-42e6-a163-c5ef318377bb") ) (segment @@ -35318,7 +39262,7 @@ (end 123.69165 94.8231) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "581441bf-4c71-4ab2-acb2-b4e5f681c946") ) (segment @@ -35326,7 +39270,7 @@ (end 124.37165 94.9231) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "9c5b5051-0205-4ec7-86bd-22cd8a1d803c") ) (segment @@ -35334,7 +39278,7 @@ (end 124.27165 94.8231) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "e01a03d4-82b8-41d7-8315-fcba47bffbd9") ) (segment @@ -35342,7 +39286,7 @@ (end 112.48225 91.3737) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "ee64d67a-7603-48c1-b8a0-d170e42779ed") ) (segment @@ -35350,7 +39294,7 @@ (end 125.12165 95.0231) (width 0.2) (layer "F.Cu") - (net "IGATE") + (net "/IGATE") (uuid "f8ffc5e3-b367-4103-8b31-bd869b9ef72d") ) (via @@ -35358,7 +39302,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "IGATE") + (net "/IGATE") (uuid "7cf6ffb9-1804-48e7-a1d0-7c5c8ead0182") ) (via @@ -35366,7 +39310,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "IGATE") + (net "/IGATE") (uuid "b0958588-c047-4fc3-9315-ea0d42324273") ) (segment @@ -35374,7 +39318,7 @@ (end 125.12165 95.0231) (width 0.2) (layer "In2.Cu") - (net "IGATE") + (net "/IGATE") (uuid "06532a0a-13c4-4e67-8178-6a73343a6c02") ) (segment @@ -35382,7 +39326,7 @@ (end 115.37555 91.3737) (width 0.2) (layer "In2.Cu") - (net "IGATE") + (net "/IGATE") (uuid "191d09ec-bb20-4f6e-ab08-25535df1e361") ) (segment @@ -35390,7 +39334,7 @@ (end 113.05675 91.3737) (width 0.2) (layer "In2.Cu") - (net "IGATE") + (net "/IGATE") (uuid "9a9b6188-6085-4d29-97fe-270ed6cc6f52") ) (segment @@ -35398,7 +39342,7 @@ (end 119.02495 95.0231) (width 0.2) (layer "In2.Cu") - (net "IGATE") + (net "/IGATE") (uuid "caf269b4-a2df-4164-9ec4-61e7f46fc7d7") ) (segment @@ -35406,7 +39350,7 @@ (end 105.53345 88.3231) (width 1) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "04221664-e997-4857-a357-286f1eda60a9") ) (segment @@ -35414,7 +39358,7 @@ (end 115.19165 86.5931) (width 1.5) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "12960f07-590a-4ff7-862c-9c16aca3fc3a") ) (segment @@ -35422,7 +39366,7 @@ (end 113.22345 96.0131) (width 1) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "298562a6-cff1-4ebe-a13f-a1d5600a4169") ) (segment @@ -35430,7 +39374,7 @@ (end 106.35585 83.6214) (width 1.5) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "3d71a35a-a7a9-4638-a55d-3721c0ff1bdf") ) (segment @@ -35438,7 +39382,7 @@ (end 118.62165 96.0131) (width 1) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "45f68bed-9e4d-4a99-a750-96c3861fa540") ) (segment @@ -35446,7 +39390,7 @@ (end 115.19165 85.3231) (width 1.5) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "5b8f492b-85c6-46c0-b30f-16b594067428") ) (segment @@ -35454,7 +39398,7 @@ (end 119.79165 95.8231) (width 0.2502) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "74263f2e-1bc6-459b-bc77-a2d73156fd3f") ) (segment @@ -35462,7 +39406,7 @@ (end 115.19165 89.1331) (width 1.5) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "aac5e176-9dc6-4301-aa0b-3f235330c346") ) (segment @@ -35470,7 +39414,7 @@ (end 113.48995 83.6214) (width 1.5) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "c98c0000-b58e-4385-aedd-946782e6136d") ) (segment @@ -35478,7 +39422,7 @@ (end 115.19165 87.8631) (width 1.5) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "c99a5659-dd44-4a0f-a34c-7e16e5eafddd") ) (segment @@ -35486,7 +39430,7 @@ (end 119.11165 96.5031) (width 1) (layer "F.Cu") - (net "VIN_SW") + (net "/VIN_SW") (uuid "e0efbd5f-68e8-41b9-a0d1-003ebc28e347") ) (segment @@ -35494,7 +39438,7 @@ (end 130.90415 113.4856) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "6d981979-540b-4967-8790-104c493cf74a") ) (segment @@ -35502,7 +39446,7 @@ (end 126.61505 111.4988) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "734b2a74-3cc5-4517-8a48-be3e2e5f8b91") ) (segment @@ -35510,7 +39454,7 @@ (end 123.49165 114.1646) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "9f61db78-e771-4a45-985a-79a467d35077") ) (segment @@ -35518,7 +39462,7 @@ (end 124.91665 112.7396) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "bd4431f0-f184-4481-a444-cbe3bd02fc48") ) (segment @@ -35526,7 +39470,7 @@ (end 128.91735 111.4988) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "be0d1c47-28ca-4af7-a93a-0d2f875f0497") ) (segment @@ -35534,7 +39478,7 @@ (end 125.34015 111.4988) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "be5e7fbe-f45e-4306-8ba7-6685f8f66f2c") ) (segment @@ -35542,7 +39486,7 @@ (end 126.61505 111.4988) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "deee93cb-6e73-4d0a-bddf-6e9e89357a90") ) (segment @@ -35550,7 +39494,7 @@ (end 129.74165 112.3231) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "f8a98211-b7d4-451d-a769-31caa6e7a1f1") ) (segment @@ -35558,7 +39502,7 @@ (end 124.91665 111.9223) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "f9297e27-8b3e-4160-807c-edf863c7d657") ) (segment @@ -35566,7 +39510,7 @@ (end 129.74165 112.3231) (width 0.2) (layer "F.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "fe70c1d1-62d7-4518-9391-956856fdb515") ) (via @@ -35574,7 +39518,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "3b264965-260a-4573-b658-9442dac690a1") ) (via @@ -35582,7 +39526,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "8831871c-17a4-4033-93ef-c7df5e0862f2") ) (via @@ -35590,7 +39534,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "e3c6d4ee-3cf5-4310-84ab-613e356833a2") ) (segment @@ -35598,7 +39542,7 @@ (end 127.66555 92.4415) (width 0.2) (layer "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "0193694f-633a-4447-b322-520b8009f8f3") ) (segment @@ -35606,7 +39550,7 @@ (end 127.89065 75.4853) (width 0.2) (layer "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "3f0ae5a7-f121-4486-9766-f26cf5db75ba") ) (segment @@ -35614,7 +39558,7 @@ (end 127.66555 75.7104) (width 0.2) (layer "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "78fde694-42d6-4dd7-9d30-7cd31985495c") ) (segment @@ -35622,7 +39566,7 @@ (end 141.36945 75.4853) (width 0.2) (layer "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "79685b26-5d38-4c49-a8bc-59872b007b03") ) (segment @@ -35630,7 +39574,7 @@ (end 127.66555 75.7104) (width 0.2) (layer "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "8a0126a1-a95c-4ae0-acc7-a78825a9873a") ) (segment @@ -35638,7 +39582,7 @@ (end 102.20155 75.7104) (width 0.2) (layer "B.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "ee7545df-efe5-4380-9b75-7d537e1b6e4e") ) (segment @@ -35646,7 +39590,7 @@ (end 128.10905 92.885) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "58b10ccf-9667-4f5a-a742-81d3eec8b0bf") ) (segment @@ -35654,7 +39598,7 @@ (end 102.03995 46.3231) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "61b90c66-0a75-4f5a-b9d5-969b79c63dc3") ) (segment @@ -35662,7 +39606,7 @@ (end 101.80135 47.7134) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "788e0698-6773-4478-99bf-b1a208edc63f") ) (segment @@ -35670,7 +39614,7 @@ (end 127.66555 92.4415) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "8f880f16-8990-4590-abc4-d02705f9b1e5") ) (segment @@ -35678,7 +39622,7 @@ (end 102.03995 46.3231) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "96c02154-ea2a-4141-801b-1e3d33737401") ) (segment @@ -35686,7 +39630,7 @@ (end 101.80135 75.3102) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "af6ced3d-3064-490d-ada7-0425a8af235d") ) (segment @@ -35694,7 +39638,7 @@ (end 128.10905 110.2208) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "ca2c0a97-b323-432d-8254-6f2be44dd7e3") ) (segment @@ -35702,15 +39646,135 @@ (end 102.03995 47.4748) (width 0.2) (layer "In2.Cu") - (net "I2C_SDA") + (net "/I2C_SDA") (uuid "e07d9a72-b3fb-4520-9f49-8849502b7934") ) + (segment + (start 200.05 84.45) + (end 202.225 84.45) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED") + (uuid "098278b8-806e-4075-bfb0-acb567f3446f") + ) + (segment + (start 198.8269 88.8231) + (end 198.85 88.8) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED") + (uuid "50c962f5-5a2b-403a-ae09-f7eeba324d7a") + ) + (segment + (start 196.54165 88.8231) + (end 198.8269 88.8231) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED") + (uuid "a0ac7a18-198a-4757-9df6-67f8f5cb4604") + ) + (via + (at 198.85 88.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/MODEM_LED") + (uuid "7044a926-29e9-44b8-a108-73c348f87fe2") + ) + (via + (at 200.05 84.45) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/MODEM_LED") + (uuid "a6f99a31-879e-4d15-ad48-33867820f072") + ) + (segment + (start 200.05 87.6) + (end 200.05 84.45) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_LED") + (uuid "245ce9de-5406-4faf-95b1-a4c80c143744") + ) + (segment + (start 198.85 88.8) + (end 200.05 87.6) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_LED") + (uuid "79077416-09b5-4ca7-9549-c79d6c054f03") + ) + (segment + (start 203.9 90.425) + (end 204.0375 90.5625) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED_A") + (uuid "2b5f0907-ca13-4956-8f7f-cc512446872e") + ) + (segment + (start 204.0375 90.5625) + (end 204.0375 92.1) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED_A") + (uuid "6444198d-0b10-49a0-b9c3-50f88b7d8a90") + ) + (segment + (start 203.875 84.45) + (end 203.875 86.025) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED_A") + (uuid "673b71b6-f862-4849-a90f-ab897d182794") + ) + (segment + (start 203.9 89.6) + (end 203.9 90.425) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED_A") + (uuid "7d64848e-376e-4f15-a102-3c0125b46efa") + ) + (segment + (start 203.875 86.025) + (end 203.9 86.05) + (width 0.2) + (layer "F.Cu") + (net "/MODEM_LED_A") + (uuid "ff23bbbe-c25d-4edc-863f-11bb4b71b09d") + ) + (via + (at 203.9 86.05) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/MODEM_LED_A") + (uuid "5629e59a-8990-4d30-a912-004e8315009b") + ) + (via + (at 203.9 89.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/MODEM_LED_A") + (uuid "93ddd7c8-ceb1-433e-a5f4-8e1e438a50a0") + ) + (segment + (start 203.9 89.6) + (end 203.9 86.05) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_LED_A") + (uuid "41464e05-9504-4920-a8dd-d8926902a922") + ) (segment (start 129.12655 117.4705) (end 125.74165 117.4705) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "1b0cb802-cc8d-45c0-b8dd-b7ab487f11dd") ) (segment @@ -35718,7 +39782,7 @@ (end 106.84335 46.3231) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "1bc42f8c-036f-4867-8e66-c223567f7787") ) (segment @@ -35726,7 +39790,7 @@ (end 125.74165 112.3231) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "2908ac84-e78f-4d6e-bc39-53049b25308e") ) (segment @@ -35734,7 +39798,7 @@ (end 126.63415 113.349) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "64006758-86c6-42d4-b5de-a0e5b17e3fbf") ) (segment @@ -35742,7 +39806,7 @@ (end 113.85315 47.4748) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "795161e4-fa3d-4975-ab1e-ff44124b9bf1") ) (segment @@ -35750,7 +39814,7 @@ (end 124.33995 117.9731) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "a29b6469-4b7c-4a72-9375-5d67aba48482") ) (segment @@ -35758,7 +39822,7 @@ (end 107.99505 47.4748) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "bbfb25e7-be5a-4217-8b45-3675d291806d") ) (segment @@ -35766,7 +39830,7 @@ (end 125.74165 113.349) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "d1431def-1dcf-4a9a-be88-a03abc0115b0") ) (segment @@ -35774,7 +39838,7 @@ (end 129.12655 117.4705) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "d743c85e-bb59-42dd-8b22-99928d90ab3c") ) (segment @@ -35782,7 +39846,7 @@ (end 123.58995 118.7231) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "dbc2f39c-2faa-47db-bb46-a93e0d1ab2be") ) (segment @@ -35790,7 +39854,7 @@ (end 123.49165 118.7231) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "e443dbfe-649a-412f-bcf5-45d67b72b073") ) (segment @@ -35798,7 +39862,7 @@ (end 124.48655 117.4705) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "e59beff8-a67f-40a9-90ee-e9b88bfeece5") ) (segment @@ -35806,7 +39870,7 @@ (end 114.75815 48.3798) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "f5811aec-bfbd-4727-85a8-cdfdc0df7c33") ) (segment @@ -35814,7 +39878,7 @@ (end 124.33995 117.6171) (width 0.2) (layer "F.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "fad323d5-450a-434f-8ab3-bdbec0c61e9c") ) (via @@ -35822,7 +39886,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "02c0f8d3-e216-4751-9f83-45f477a7530c") ) (via @@ -35830,7 +39894,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "050dbad2-366d-4134-9250-c722cea54bb6") ) (via @@ -35838,7 +39902,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "490746e7-7432-4e44-b4ae-ccc83411005f") ) (via @@ -35846,7 +39910,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "e188bd15-7372-4382-ac7b-c513d03dc0fe") ) (segment @@ -35854,7 +39918,7 @@ (end 129.60315 92.46) (width 0.2) (layer "B.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "353f08b3-76fe-4d71-9e08-bb36f1d7eb35") ) (segment @@ -35862,7 +39926,7 @@ (end 133.07165 88.9915) (width 0.2) (layer "B.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "83680922-813c-4ff7-ae3c-878ec4e72c3d") ) (segment @@ -35870,7 +39934,7 @@ (end 121.16165 54.7833) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "0625da51-915d-49ff-ba72-e27906e80222") ) (segment @@ -35878,7 +39942,7 @@ (end 114.75815 48.3798) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "3e9debb9-53ca-473b-96b5-484058a710e4") ) (segment @@ -35886,7 +39950,7 @@ (end 137.32345 88.0596) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "742491f8-3261-433b-ba43-5085253d6653") ) (segment @@ -35894,7 +39958,7 @@ (end 136.10905 70.0005) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "7dd1b471-81cc-4fce-aa07-5c1359c3ba99") ) (segment @@ -35902,7 +39966,7 @@ (end 134.44225 70.0005) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "7fd43a10-1c8f-4b2f-9c49-9631adccdf1c") ) (segment @@ -35910,7 +39974,7 @@ (end 129.60315 92.46) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "81ae2330-11f0-4639-a417-600c925b6bf1") ) (segment @@ -35918,7 +39982,7 @@ (end 121.16165 56.7199) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "a0118878-73e3-4f03-aa01-a79cc245d1a8") ) (segment @@ -35926,7 +39990,7 @@ (end 131.43075 73.012) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "a08b8493-49db-4960-9de5-19dc73597a6a") ) (segment @@ -35934,7 +39998,7 @@ (end 129.60315 110.38) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "be44e73c-11bf-4552-9d45-642b64677d8e") ) (segment @@ -35942,7 +40006,7 @@ (end 134.44225 70.0005) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "c9fb2b51-de75-45f4-9a5e-7240cd1470d3") ) (segment @@ -35950,7 +40014,7 @@ (end 131.43075 82.1669) (width 0.2) (layer "In2.Cu") - (net "I2C_SCL") + (net "/I2C_SCL") (uuid "e8b981b3-bfb3-417f-9fc0-d057ebdc7088") ) (segment @@ -35958,23 +40022,39 @@ (end 189.66335 111.0327) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "0241dede-da63-4436-9f32-66ae8a08ea90") ) + (segment + (start 209.55 113.75) + (end 205.46475 113.75) + (width 1) + (layer "F.Cu") + (net "/3V3_MODEM") + (uuid "2c8fad2b-d870-4a0b-a429-7d5f43050f69") + ) (segment (start 173.29335 118.3231) (end 177.29335 122.3231) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "38a5f565-b961-4183-b11c-eab1a7eb8ed4") ) + (segment + (start 196.54165 86.8231) + (end 193.8769 86.8231) + (width 1) + (layer "F.Cu") + (net "/3V3_MODEM") + (uuid "38deda08-4c98-408b-9fef-3e474dbb537f") + ) (segment (start 178.69165 104.0394) (end 176.06675 104.0394) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "49a3b844-9fd0-4345-a3d5-969d5bf6f775") ) (segment @@ -35982,15 +40062,23 @@ (end 186.04375 118.771) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "4e1495c9-186e-4cda-9b0b-24b34dbafbea") ) + (segment + (start 198.90435 102.3231) + (end 200.19475 103.6135) + (width 1) + (layer "F.Cu") + (net "/3V3_MODEM") + (uuid "69877db5-9277-4169-9d62-77ab2a5dd8df") + ) (segment (start 189.66335 111.0327) (end 191.15345 109.5426) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "6a43f938-e077-4374-a167-71f75d79cc65") ) (segment @@ -35998,15 +40086,23 @@ (end 200.19475 109.5426) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "6a692d93-6cfc-4725-8f88-98920764c411") ) + (segment + (start 200.44375 118.771) + (end 205.46475 113.75) + (width 1) + (layer "F.Cu") + (net "/3V3_MODEM") + (uuid "6daedaa6-0030-4ebe-8e9d-aab00a124e08") + ) (segment (start 171.59165 118.3231) (end 173.29335 118.3231) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "91b6be77-b850-4d28-bb89-2e7a7062bba1") ) (segment @@ -36014,7 +40110,7 @@ (end 186.33635 111.0327) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "9623fa2e-794b-4055-8e9e-40cb107b157b") ) (segment @@ -36022,15 +40118,23 @@ (end 182.49165 122.3231) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "98a28562-3331-42ae-ad07-8a85416a1d2f") ) (segment - (start 200.44375 118.771) + (start 198.69165 102.3231) + (end 198.90435 102.3231) + (width 1) + (layer "F.Cu") + (net "/3V3_MODEM") + (uuid "9ffb3aaf-4c45-485c-b60d-66e922199299") + ) + (segment + (start 205.46475 113.75) (end 207.47165 111.7431) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "bdfcc147-d473-46f5-a7fe-a75807a0eab2") ) (segment @@ -36038,7 +40142,7 @@ (end 179.34305 104.0394) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "c9576e5e-6f56-430c-aba2-19e468f2cfaf") ) (segment @@ -36046,23 +40150,23 @@ (end 205.27115 109.5426) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "c97bff6b-835b-4d6d-83af-f21c77352835") ) (segment - (start 198.90435 102.3231) - (end 200.19475 103.6135) + (start 193.8769 86.8231) + (end 193.85 86.85) (width 1) (layer "F.Cu") - (net "3V3_MODEM") - (uuid "cc2cf6d1-f22b-4efe-a419-f363cbae5833") + (net "/3V3_MODEM") + (uuid "c9b1aea5-8b26-49ef-814e-170af7eab8e8") ) (segment (start 178.69165 104.0394) (end 178.69165 102.3231) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "d108a148-61d2-478a-adb3-ddeb77f1ca9a") ) (segment @@ -36070,7 +40174,7 @@ (end 200.44375 118.771) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "e0a48c47-8cb4-4895-92ce-5294127df80b") ) (segment @@ -36078,7 +40182,7 @@ (end 200.19475 109.5426) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "ef2fca31-4aa8-4537-8833-54bdc98014e9") ) (segment @@ -36086,31 +40190,103 @@ (end 200.19475 109.5426) (width 1) (layer "F.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "f6c3819c-a93b-472d-befe-5bed8d10816b") ) - (segment - (start 198.69165 102.3231) - (end 198.90435 102.3231) - (width 1) - (layer "F.Cu") - (net "3V3_MODEM") - (uuid "ffe10b54-52f1-4fd8-adf0-11eeae412fcf") + (via + (at 193.85 86.85) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/3V3_MODEM") + (uuid "05e0f741-fc8c-4e90-bff7-28460b45600b") + ) + (via + (at 190.9 89.05) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/3V3_MODEM") + (uuid "a840dd28-5999-4f22-b381-ab2cfa5910a0") ) (via (at 176.06675 104.0394) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "e3eb3ea1-5b98-4683-8e22-908de0447e13") ) + (via + (at 209.55 113.75) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/3V3_MODEM") + (uuid "ec88687b-353a-4a52-a5b3-6b48e2792094") + ) + (segment + (start 204.35 94.25) + (end 212.8 102.7) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "2b14079f-d8b6-4465-8474-6a76c2bb7602") + ) + (segment + (start 193.85 94.25) + (end 204.35 94.25) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "556cab26-d0e0-4421-bf06-c6a08a5292a0") + ) + (segment + (start 190.9 89.05) + (end 192.05 89.05) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "6776d904-2c87-48f9-8b21-a4bc27eb63a2") + ) + (segment + (start 212.8 110.5) + (end 209.55 113.75) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "67873d8c-cd5a-432b-a96e-8d7e2891edeb") + ) + (segment + (start 212.8 102.7) + (end 212.8 110.5) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "775b00ec-2aec-415f-9f61-ac7fe07bfabf") + ) + (segment + (start 192.05 89.05) + (end 193.85 90.85) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "9c3f81d5-04ae-4a19-8793-3f6e830a313c") + ) + (segment + (start 193.85 90.85) + (end 193.85 94.25) + (width 1) + (layer "B.Cu") + (net "/3V3_MODEM") + (uuid "b7845f45-74cb-4cd6-bd51-949e92d6b413") + ) (segment (start 172.81185 76.2029) (end 174.19165 74.8231) (width 1) (layer "In2.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "1ebd3bef-03be-40e5-998a-827d4420a5c6") ) (segment @@ -36118,7 +40294,7 @@ (end 176.06675 100.298) (width 1) (layer "In2.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "294d0f3a-5b9e-4152-bb6c-1b5ba68e3a44") ) (segment @@ -36126,15 +40302,31 @@ (end 172.81185 97.0431) (width 1) (layer "In2.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "31b13b96-f5aa-4ee0-b920-1ebd1d9f74f0") ) + (segment + (start 191.65 89.05) + (end 190.9 89.05) + (width 1) + (layer "In2.Cu") + (net "/3V3_MODEM") + (uuid "7d8b99c7-92e8-4e5e-81fa-c94555a24d70") + ) + (segment + (start 193.85 86.85) + (end 191.65 89.05) + (width 1) + (layer "In2.Cu") + (net "/3V3_MODEM") + (uuid "8fc34ca2-097b-4328-9287-7979b58e05af") + ) (segment (start 172.81185 97.0431) (end 172.81185 76.2029) (width 1) (layer "In2.Cu") - (net "3V3_MODEM") + (net "/3V3_MODEM") (uuid "ae9244b2-c3bb-4474-b543-2f42b9641be1") ) (segment @@ -36142,7 +40334,7 @@ (end 174.19165 76.8231) (width 0.2) (layer "B.Cu") - (net "DOUT_4G") + (net "/DOUT_4G") (uuid "12a70f93-cad0-411f-a070-80320ce63a99") ) (segment @@ -36150,7 +40342,7 @@ (end 151.19565 76.8231) (width 0.2) (layer "B.Cu") - (net "DOUT_4G") + (net "/DOUT_4G") (uuid "67faa6f7-a09b-482a-8c0d-7e55395c29a9") ) (segment @@ -36158,7 +40350,7 @@ (end 146.83335 81.1854) (width 0.2) (layer "B.Cu") - (net "DOUT_4G") + (net "/DOUT_4G") (uuid "a237c2ee-13fc-4a52-8033-e6327837b505") ) (segment @@ -36166,31 +40358,391 @@ (end 146.83335 81.3231) (width 0.2) (layer "B.Cu") - (net "DOUT_4G") + (net "/DOUT_4G") (uuid "cbb6bc6d-74f1-4e99-b8d8-a3668d7d1316") ) (segment - (start 172.8 80.8) - (end 172.8231 80.8231) + (start 144.3 135.6) + (end 141.9 135.6) (width 0.2) (layer "F.Cu") - (net "unconnected-(J7-Pin_4-Pad4)") - (uuid "78c900e7-59f7-4b3f-abdf-0e5aee1e84fe") + (net "/MODEM_RST") + (uuid "2916e31f-d7e0-4996-ace9-13522a2f4c64") + ) + (via + (at 141.9 135.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/MODEM_RST") + (uuid "7686ef65-b645-4405-ba83-c52239b83a0d") ) (segment - (start 174.19165 80.8231) - (end 172.8231 80.8231) + (start 141.9 135.6) + (end 141.9 133.85) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "2f243c2d-7b78-4362-afc5-c6c6f712188f") + ) + (segment + (start 141.9 133.85) + (end 144 131.75) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "4e0ed1f6-cb48-4a0c-a56e-2df784923d64") + ) + (segment + (start 151.5 131.75) + (end 155.85 127.4) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "8af70ad9-5af9-454a-aff0-f0554df6434c") + ) + (segment + (start 165.75 82.8) + (end 174.16855 82.8) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "9cdf96cf-79fe-4480-aeb7-b192e354d16e") + ) + (segment + (start 174.16855 82.8) + (end 174.19165 82.8231) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "9e98fedf-3ccd-4d67-9f7b-817af22db23e") + ) + (segment + (start 155.85 92.7) + (end 165.75 82.8) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "a27e0948-2905-4207-b351-345ee5f5675a") + ) + (segment + (start 155.85 127.4) + (end 155.85 92.7) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "b05c7fc3-9956-41a8-ad60-01ef9fa5909f") + ) + (segment + (start 144 131.75) + (end 151.5 131.75) + (width 0.2) + (layer "In1.Cu") + (net "/MODEM_RST") + (uuid "ea06090f-bc15-4a5a-9b9b-f2245fe5d911") + ) + (segment + (start 167.9731 84.8231) + (end 167.85 84.7) (width 0.2) (layer "F.Cu") - (net "unconnected-(J7-Pin_4-Pad4)") - (uuid "f517b459-daba-47f5-b909-a79c21d4958a") + (net "/USB_VBUS") + (uuid "b2c7beb6-4f3b-4750-bfac-35c6d3bbf4be") + ) + (segment + (start 166.3 130.8) + (end 166.275 130.775) + (width 0.2) + (layer "F.Cu") + (net "/USB_VBUS") + (uuid "ebce9b39-8902-4a8a-aa28-b27dd3097f9d") + ) + (segment + (start 174.19165 84.8231) + (end 167.9731 84.8231) + (width 0.2) + (layer "F.Cu") + (net "/USB_VBUS") + (uuid "f47721bc-39a1-4c1b-a7f2-b7969b42cacc") + ) + (via + (at 167.85 84.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/USB_VBUS") + (uuid "68e30b20-4f21-4c29-9e3c-de11ff9d6af3") + ) + (segment + (start 162.025 129.425) + (end 162.025 130.775) + (width 0.2) + (layer "B.Cu") + (net "/USB_VBUS") + (uuid "99d322e0-90a0-4f6b-984c-6f9c22e7aa76") + ) + (segment + (start 163.1 131.85) + (end 165.7 131.85) + (width 0.2) + (layer "B.Cu") + (net "/USB_VBUS") + (uuid "a9ac366a-0656-4d57-8fef-fea94eec83fe") + ) + (segment + (start 166.275 131.275) + (end 166.275 130.775) + (width 0.2) + (layer "B.Cu") + (net "/USB_VBUS") + (uuid "e0f3ca60-278b-4250-9932-f1e44cd9a1a0") + ) + (segment + (start 165.7 131.85) + (end 166.275 131.275) + (width 0.2) + (layer "B.Cu") + (net "/USB_VBUS") + (uuid "f2f13441-b8bd-45b2-a763-e1f75863bff3") + ) + (segment + (start 162.025 130.775) + (end 163.1 131.85) + (width 0.2) + (layer "B.Cu") + (net "/USB_VBUS") + (uuid "f5daeb09-c275-43a8-9e02-064975f1d664") + ) + (segment + (start 166.275 129.425) + (end 166.25 129.4) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "11997e9c-6686-4957-8c33-17571bd41fdb") + ) + (segment + (start 166.25 128) + (end 165.9 127.65) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "20d33603-0905-4e60-9613-4a69af98e7b8") + ) + (segment + (start 167.85 84.7) + (end 167.95 84.6) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "5681d90f-df1b-4e1b-bc14-4b11dabb7bfa") + ) + (segment + (start 165.9 127.65) + (end 165.9 86.65) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "8191f042-9137-4552-a377-d73a8bd08511") + ) + (segment + (start 166.25 129.4) + (end 166.25 128) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "b4337bbc-5154-4334-bcdb-ca6be87b040e") + ) + (segment + (start 166.275 129.425) + (end 166.275 130.775) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "b4830c91-636e-4f2e-bc50-2ac27a6a1c9c") + ) + (segment + (start 165.9 86.65) + (end 167.85 84.7) + (width 0.2) + (layer "In1.Cu") + (net "/USB_VBUS") + (uuid "baf5ab14-d0a6-4210-b73c-4cc57b750f5b") + ) + (segment + (start 163.725 129.425) + (end 163.725 129.675) + (width 0.2) + (layer "F.Cu") + (net "/USB_DP") + (uuid "77e0f941-23b0-4818-86b6-a028772878bd") + ) + (segment + (start 164.575 130.525) + (end 164.575 130.775) + (width 0.2) + (layer "F.Cu") + (net "/USB_DP") + (uuid "9554f908-c637-4f2d-befa-ca79506663b8") + ) + (segment + (start 163.725 129.675) + (end 164.575 130.525) + (width 0.2) + (layer "F.Cu") + (net "/USB_DP") + (uuid "d48fbe31-a7aa-4d65-ba38-41a84e7b8038") + ) + (segment + (start 174.19165 86.8231) + (end 170.61855 83.25) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DP") + (uuid "20bc3962-8d78-4b56-a44f-862430a221e2") + ) + (segment + (start 165.1 84.1) + (end 165.1 126.85) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DP") + (uuid "3ef41ed3-9ea0-452e-b6df-5d884b7c5a8a") + ) + (segment + (start 165.95 83.25) + (end 165.1 84.1) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DP") + (uuid "c422ea4b-672f-43b0-b4e1-275ab4d31ff4") + ) + (segment + (start 170.61855 83.25) + (end 165.95 83.25) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DP") + (uuid "c495fd47-f266-4158-a841-50802bb3af24") + ) + (segment + (start 163.725 128.225) + (end 163.725 129.425) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DP") + (uuid "c874da1a-978a-4c56-9b86-b85c263922a6") + ) + (segment + (start 165.1 126.85) + (end 163.725 128.225) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DP") + (uuid "e78cb854-dc50-4781-b4df-58cd72f80a88") + ) + (segment + (start 164.575 129.425) + (end 164.575 129.675) + (width 0.2) + (layer "B.Cu") + (net "/USB_DM") + (uuid "9441c4ce-a0fe-4289-a878-df9a948723b8") + ) + (segment + (start 164.575 129.675) + (end 163.725 130.525) + (width 0.2) + (layer "B.Cu") + (net "/USB_DM") + (uuid "cc4566e2-68ef-4b3a-939a-94127139c75a") + ) + (segment + (start 163.725 130.525) + (end 163.725 130.775) + (width 0.2) + (layer "B.Cu") + (net "/USB_DM") + (uuid "de0b1e0b-b9e0-4d97-97e3-7a4e8f397acc") + ) + (segment + (start 166.092118 83.673568) + (end 170.476432 83.673568) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "046551f6-4eb0-41a3-91fd-9b1d5ea52108") + ) + (segment + (start 174.16475 88.85) + (end 174.19165 88.8231) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "0d4e59d6-57a4-4c3c-9993-f4fe11263613") + ) + (segment + (start 172.4 88.85) + (end 174.16475 88.85) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "3e710ff1-595d-4f05-89a4-cce6ccd60626") + ) + (segment + (start 164.575 129.425) + (end 164.575 128.525) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "496a61f5-84b6-41e8-af45-f433cc64f662") + ) + (segment + (start 172.4 85.597136) + (end 172.4 88.85) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "62a8c69d-6ead-44de-ac53-c71f9dda09a4") + ) + (segment + (start 165.5 127.6) + (end 165.5 84.265686) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "805299d7-c65b-44bd-9297-4925d1b561d8") + ) + (segment + (start 170.476432 83.673568) + (end 172.4 85.597136) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "86fca1f1-2875-4a25-9461-9831bd37f4c1") + ) + (segment + (start 165.5 84.265686) + (end 166.092118 83.673568) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "a8d241d7-c827-4865-b734-382b770cc2e8") + ) + (segment + (start 164.575 128.525) + (end 165.5 127.6) + (width 0.2) + (layer "In1.Cu") + (net "/USB_DM") + (uuid "d3bc913a-6642-4c9a-bf70-af5e4a19971f") ) (segment (start 104.04165 98.7762) (end 104.04165 102.3231) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "04e62be3-fa4b-4a72-8be6-371389663d86") ) (segment @@ -36198,7 +40750,7 @@ (end 101.04165 107.3231) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0a895491-f855-45ea-822e-74368576e66d") ) (segment @@ -36206,7 +40758,7 @@ (end 99.10475 82.8325) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0ed691f1-35e4-4740-8909-54eca3db6a68") ) (segment @@ -36214,7 +40766,7 @@ (end 166.79805 79.0303) (width 0.9998) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "110035c8-1cce-437d-a1d7-c3a631d734d3") ) (segment @@ -36222,7 +40774,7 @@ (end 123.69165 94.3231) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "125e4dff-f008-41c5-9c71-d1afefbe2a95") ) (segment @@ -36230,7 +40782,7 @@ (end 119.79165 95.3231) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "139b071b-db83-4c7d-864d-9758d66dbd58") ) (segment @@ -36238,7 +40790,7 @@ (end 118.02785 94.8031) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "2323e4cd-322b-46ca-8182-d10cdcbec948") ) (segment @@ -36246,7 +40798,7 @@ (end 99.10475 87.9475) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "2575b9b1-8ad6-4464-a688-7f352ec3f556") ) (segment @@ -36254,7 +40806,7 @@ (end 101.38515 94.0598) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "2596d2ba-0ec1-445c-8f34-d856c04e96ab") ) (segment @@ -36262,7 +40814,7 @@ (end 111.64165 97.2914) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "25f5a34c-c31b-4a69-8dfa-3c8a92699374") ) (segment @@ -36270,7 +40822,7 @@ (end 101.38515 94.0598) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "27fbd2a4-99a9-4180-b872-46a2533b49c1") ) (segment @@ -36278,7 +40830,7 @@ (end 101.38515 90.9791) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "2f577c8e-ca77-4dcd-95a0-d41e5674305c") ) (segment @@ -36286,7 +40838,7 @@ (end 101.30695 107.3231) (width 0.8014) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "35446778-62f6-43ad-a429-7ae95c30c0a9") ) (segment @@ -36294,7 +40846,7 @@ (end 101.38515 96.0147) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "35d4e897-8943-446c-ba74-fa02a1060786") ) (segment @@ -36302,7 +40854,7 @@ (end 123.69165 94.3231) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "39abe099-48fa-44de-8b2d-ce272a2cd5a2") ) (segment @@ -36310,7 +40862,7 @@ (end 99.24165 98.3231) (width 1.0018) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "3bcc4976-90c8-4816-b206-7aedc90d84c7") ) (segment @@ -36318,7 +40870,7 @@ (end 166.79805 79.7167) (width 0.9998) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "459ba7ee-234c-42ad-9810-b75649cc8d16") ) (segment @@ -36326,7 +40878,7 @@ (end 99.69045 97.8743) (width 1.0018) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "46427459-300a-469c-bd74-aa581fae137a") ) (segment @@ -36334,7 +40886,7 @@ (end 101.33265 96.0672) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "57814827-ce88-45bd-bfdf-4db2fbee92d5") ) (segment @@ -36342,7 +40894,7 @@ (end 100.41425 96.0672) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "634aaa77-ff29-45f3-8358-46ffabe4aa60") ) (segment @@ -36350,7 +40902,7 @@ (end 102.87605 80.7228) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "6415d48b-2ea6-4a94-b1c9-4473cd1477b1") ) (segment @@ -36358,7 +40910,7 @@ (end 102.09165 108.857) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "7cce50bb-6171-4011-8639-61b992d30895") ) (segment @@ -36366,7 +40918,7 @@ (end 101.30695 105.0578) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "8796070c-9093-470b-b23f-6721cf4f1910") ) (segment @@ -36374,7 +40926,7 @@ (end 108.41005 94.0598) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "8c56c524-1ff1-4b93-89dc-49f01809ee7f") ) (segment @@ -36382,7 +40934,7 @@ (end 101.33265 96.0672) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "8d498ce7-bbdd-489f-8aa5-0a8678c98849") ) (segment @@ -36390,7 +40942,7 @@ (end 118.46975 94.7612) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "97a5c36f-8432-428f-807b-443379424591") ) (segment @@ -36398,7 +40950,7 @@ (end 166.19165 80.3231) (width 0.9998) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "a2eb66ba-d2db-4e16-aa8f-9bf93e7fd87f") ) (segment @@ -36406,7 +40958,7 @@ (end 118.06975 94.7612) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "a689fee1-3443-436c-aece-d2b799b7032f") ) (segment @@ -36414,7 +40966,7 @@ (end 101.30695 107.8743) (width 0.8014) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "bcc8782d-76b8-4371-9e55-6ccdc7e22f51") ) (segment @@ -36422,7 +40974,7 @@ (end 119.03165 95.3231) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "c16ad80f-4f63-4897-ac37-ec1b004595ad") ) (segment @@ -36430,7 +40982,7 @@ (end 104.04165 98.7762) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "c7f16c94-20bf-471e-a104-20466eb5a392") ) (segment @@ -36438,7 +40990,7 @@ (end 101.21445 80.7228) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "ca0d805f-6140-43c3-8102-55b8dbb83922") ) (segment @@ -36446,7 +40998,7 @@ (end 124.67165 94.3231) (width 0.2) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "e08bb410-e764-49eb-9fd9-970ea50d89fd") ) (segment @@ -36454,7 +41006,7 @@ (end 101.30695 107.0578) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "ecce5bb2-0c1d-48da-a151-95fed5953324") ) (segment @@ -36462,7 +41014,7 @@ (end 102.19065 108.758) (width 1.5) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "fc32c694-a573-4145-8727-179e78dcc9b7") ) (segment @@ -36470,7 +41022,7 @@ (end 101.30695 107.0578) (width 0.8014) (layer "F.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "fc4bae37-6f80-4d18-b5c4-f877891ee1e5") ) (via @@ -36478,7 +41030,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0492008d-0647-4b95-b414-f6fa219ddc86") ) (via @@ -36486,7 +41038,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "7a86ffbc-81a7-4adc-b036-e43e78de1fa5") ) (via @@ -36494,7 +41046,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "ab55cbdd-2f33-46f0-b66f-0448bb4b84f1") ) (via @@ -36502,7 +41054,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "d6d34bcb-4f9f-4a1e-899a-d3b3dadf72b3") ) (segment @@ -36510,7 +41062,7 @@ (end 117.95165 94.8031) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0524f395-0ff5-4146-9cf7-fb3b1e002efa") ) (segment @@ -36518,7 +41070,7 @@ (end 124.10165 93.9631) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "16500da5-ca24-43e4-8e9e-a98c2d8e998b") ) (segment @@ -36526,7 +41078,7 @@ (end 91.34165 65.7231) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "17fb8586-8b85-427e-b3c1-81f0cae3e490") ) (segment @@ -36534,7 +41086,7 @@ (end 110.87165 100.2931) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "1a8ef076-cd45-4d0d-834d-959228eed822") ) (segment @@ -36542,7 +41094,7 @@ (end 87.74165 73.6031) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "297fa0cc-c5d9-4775-b1b7-56444e480074") ) (segment @@ -36550,7 +41102,7 @@ (end 93.64165 63.4231) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "3c77d4ee-793e-48be-ac13-c1e1420592cc") ) (segment @@ -36558,7 +41110,7 @@ (end 124.66165 94.3331) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "589b769d-b0b9-43c7-8283-210503181fd4") ) (segment @@ -36566,7 +41118,7 @@ (end 118.283515 95.113065) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "59526eed-bd56-4f1f-9bc3-d18c0df0c14e") ) (segment @@ -36574,7 +41126,7 @@ (end 124.45165 94.3131) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "730fee38-b149-4e29-a57a-e8b333f14a13") ) (segment @@ -36582,7 +41134,7 @@ (end 91.34165 70.0031) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "82eefb00-ab66-4626-9221-dc8cf88af82f") ) (segment @@ -36590,7 +41142,7 @@ (end 124.59165 94.3331) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "8364bff2-2071-4b80-8056-b02cae84fdcf") ) (segment @@ -36598,7 +41150,7 @@ (end 93.64165 42.4331) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "a14d9550-3984-430a-9716-298ebc7d5ef2") ) (segment @@ -36606,7 +41158,7 @@ (end 124.57165 94.3131) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "adaeb9ac-f37e-4dcf-abd6-cf15b68b42cc") ) (segment @@ -36614,7 +41166,7 @@ (end 122.781685 95.113065) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "b2dbc783-715e-485e-84b7-12e69471c4b0") ) (segment @@ -36622,7 +41174,7 @@ (end 106.04165 91.9031) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "b3d79ddb-090a-452a-8942-211aca59380b") ) (segment @@ -36630,7 +41182,7 @@ (end 123.93165 93.9631) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "b97630fe-e2d7-4eb3-8203-bc86d93770c9") ) (segment @@ -36638,7 +41190,7 @@ (end 127.19165 46.3231) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "bce1b876-f4eb-4fbf-b86a-e7caa331fd6e") ) (segment @@ -36646,7 +41198,7 @@ (end 117.97355 94.8031) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "bead9f4f-8f5e-4e2e-b0e3-09079a015480") ) (segment @@ -36654,7 +41206,7 @@ (end 112.46165 100.2931) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "e3d58612-f579-44ae-8d2c-e9fbc53aed12") ) (segment @@ -36662,7 +41214,7 @@ (end 123.30165 42.4331) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "e5b3d962-c4b7-4d4c-a5be-f229c4b5e0e9") ) (segment @@ -36670,7 +41222,7 @@ (end 106.04165 95.4631) (width 0.2) (layer "B.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "f4f0c508-a7ef-498d-bd3b-e7b30e930a42") ) (segment @@ -36678,7 +41230,7 @@ (end 103.22815 74.9668) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0497b9d7-fd32-470c-af8e-c9da85f088ee") ) (segment @@ -36686,7 +41238,7 @@ (end 103.21745 77.885) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0968a22a-c1f4-4f4c-9813-c4f33b590ecf") ) (segment @@ -36694,7 +41246,7 @@ (end 107.96725 46.4927) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "0de7fdd7-6bed-4ae9-8fb4-2ee9b82ce6fa") ) (segment @@ -36702,7 +41254,7 @@ (end 110.09135 44.3686) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "1a24e781-717c-4c21-a4b7-50325ba9624e") ) (segment @@ -36710,7 +41262,7 @@ (end 102.87605 51.8277) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "289d865b-711b-4d9e-8e8b-326210c4cc63") ) (segment @@ -36718,7 +41270,7 @@ (end 103.21745 76.4752) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "2afd7b4c-5c48-447b-a66b-2e66bf7f07a8") ) (segment @@ -36726,7 +41278,7 @@ (end 125.23715 44.3686) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "2cdbc510-598f-4539-b6fc-865d359905a5") ) (segment @@ -36734,7 +41286,7 @@ (end 162.92415 60.1094) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "31bf0da7-a3dc-4df1-a820-ba35dc119538") ) (segment @@ -36742,7 +41294,7 @@ (end 107.96725 46.7365) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "336d0cc9-7a1a-44da-ac79-2bec33f7e525") ) (segment @@ -36750,7 +41302,7 @@ (end 102.87605 74.6147) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "38f10029-b077-4ca3-87a5-b1749c8c6750") ) (segment @@ -36758,7 +41310,7 @@ (end 127.19165 46.3231) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "4a8affff-5b30-4c96-b056-3b36ab5a0dd3") ) (segment @@ -36766,7 +41318,7 @@ (end 153.11355 50.2988) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "4fc77b90-4dd4-4de4-bca8-4cf49ed0bde9") ) (segment @@ -36774,7 +41326,7 @@ (end 162.92415 75.1564) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "70993cbb-93bd-433e-aec3-2a8281c81c73") ) (segment @@ -36782,7 +41334,7 @@ (end 102.98715 76.2449) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "7aa431d4-8478-49f8-9d15-18a39d096320") ) (segment @@ -36790,7 +41342,7 @@ (end 102.87605 78.2264) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "abb33bd9-72d8-4c36-92ed-d74dbc92ba81") ) (segment @@ -36798,7 +41350,7 @@ (end 127.19165 46.3231) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "c61015b4-e8d8-49bd-91aa-499d6b041b82") ) (segment @@ -36806,7 +41358,7 @@ (end 127.19165 46.5858) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "cec9f1f2-ace9-4985-99a8-ee4cace4ad98") ) (segment @@ -36814,7 +41366,7 @@ (end 102.98715 76.2448) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "d1523fc7-a215-402f-b52c-8a51ab525215") ) (segment @@ -36822,7 +41374,7 @@ (end 130.90465 50.2988) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "d6e2d38b-d445-4ce2-ac70-7e6f39575360") ) (segment @@ -36830,7 +41382,7 @@ (end 103.22815 76.0038) (width 1.5) (layer "In2.Cu") - (net "VEH5V") + (net "/VEH5V") (uuid "ff9cf6f6-2351-446a-aee9-69f77a4ff03d") ) (segment @@ -36838,7 +41390,7 @@ (end 101.07025 115.0896) (width 0.2) (layer "F.Cu") - (net "LED_A") + (net "/LED_A") (uuid "75a4b0bc-05e1-425f-b447-640f25b29393") ) (segment @@ -36846,7 +41398,7 @@ (end 98.79465 107.4261) (width 0.2) (layer "F.Cu") - (net "LED_A") + (net "/LED_A") (uuid "84cbf39f-caee-4c0b-b832-c19d036fd8b8") ) (segment @@ -36854,7 +41406,7 @@ (end 98.69165 107.3231) (width 0.2) (layer "F.Cu") - (net "LED_A") + (net "/LED_A") (uuid "9844d666-58e6-4648-b1e8-f531fb349085") ) (segment @@ -36862,7 +41414,7 @@ (end 101.07025 116.2642) (width 0.2) (layer "F.Cu") - (net "LED_A") + (net "/LED_A") (uuid "e37ccc99-4130-492b-8592-b6067c354d5c") ) (via @@ -36870,7 +41422,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "LED_A") + (net "/LED_A") (uuid "17a21ff5-af0c-4f21-9727-0a08c340dfb0") ) (via @@ -36878,7 +41430,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "LED_A") + (net "/LED_A") (uuid "33c89ffd-8118-484e-9767-0417223b7df6") ) (via @@ -36886,7 +41438,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "LED_A") + (net "/LED_A") (uuid "f1389e4a-d688-4734-b204-68f7e470c434") ) (segment @@ -36894,7 +41446,7 @@ (end 177.36915 107.4261) (width 0.2) (layer "B.Cu") - (net "LED_A") + (net "/LED_A") (uuid "c20ea527-af5f-455c-b117-eea9e677b019") ) (segment @@ -36902,7 +41454,7 @@ (end 99.78985 107.4261) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "014ed0b1-94a2-42ef-9ee2-ad38ee6dbef3") ) (segment @@ -36910,7 +41462,7 @@ (end 194.97215 89.8231) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "2ec4d553-ccbe-441a-9195-94401c412229") ) (segment @@ -36918,7 +41470,7 @@ (end 206.02125 74.9706) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "3a7b7fb0-9c93-4f70-9aa1-fe13ed0973d0") ) (segment @@ -36926,7 +41478,7 @@ (end 206.02125 80.7718) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "6c1c8676-e0bc-4afc-ad4f-1336c1b488c3") ) (segment @@ -36934,7 +41486,7 @@ (end 99.78985 113.8092) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "768194f9-0993-4fe4-adba-dfa98eb24818") ) (segment @@ -36942,7 +41494,7 @@ (end 196.96995 89.8231) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "b6469185-33e3-4684-a408-fe2f1e671e12") ) (segment @@ -36950,7 +41502,7 @@ (end 210.16665 70.8252) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "d3022da9-fb7b-43dc-b20f-c9d773eaf5fa") ) (segment @@ -36958,7 +41510,7 @@ (end 177.36915 107.4261) (width 0.2) (layer "In2.Cu") - (net "LED_A") + (net "/LED_A") (uuid "dc88fefd-4e30-4d5b-9c50-6b9e2ce6a985") ) (segment @@ -36966,7 +41518,7 @@ (end 89.25695 62.0384) (width 1) (layer "F.Cu") - (net "24V_IN") + (net "/24V_IN") (uuid "157f5cb9-8f83-482d-8dda-c95742066e99") ) (segment @@ -36974,7 +41526,7 @@ (end 89.04165 61.8231) (width 1) (layer "F.Cu") - (net "24V_IN") + (net "/24V_IN") (uuid "55dce458-f964-4da1-9111-61d3db563592") ) (segment @@ -36982,7 +41534,7 @@ (end 89.04165 61.8231) (width 1) (layer "F.Cu") - (net "24V_IN") + (net "/24V_IN") (uuid "b3401c4e-2762-4b5f-a961-862351137340") ) (segment @@ -36990,7 +41542,7 @@ (end 89.04165 56.7331) (width 1) (layer "F.Cu") - (net "24V_IN") + (net "/24V_IN") (uuid "e374d61a-1ea2-41f2-8d70-814c1038425a") ) (via @@ -36998,152 +41550,176 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "24V_IN") + (net "/24V_IN") (uuid "8505d75c-cc61-4fb9-963c-d9d3a0474844") ) (segment - (start 103.32105 83.2208) - (end 99.15985 79.0596) + (start 172.69165 133.8231) + (end 172.69165 133.54165) (width 1) (layer "In2.Cu") - (net "24V_IN") - (uuid "0b731556-9d17-4f90-a741-8f35dfad7171") + (net "/24V_IN") + (uuid "0d75b721-8fb5-43f5-9482-ba9d24db1a89") ) (segment - (start 124.85195 90.7086) - (end 124.46935 90.326) + (start 172.6 127.35) + (end 172.6 133.73145) (width 1) (layer "In2.Cu") - (net "24V_IN") - (uuid "1e6bb849-c5ad-4699-b8a4-00c7d789e90f") - ) - (segment - (start 123.63965 90.326) - (end 123.23875 90.7269) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "29fbfb4c-a109-47f5-a3b3-6a14ce1a7ea1") - ) - (segment - (start 124.46935 90.326) - (end 123.63965 90.326) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "318b276b-6196-42b1-af5a-ea515d474f91") - ) - (segment - (start 124.85205 90.7086) - (end 124.85195 90.7086) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "3b006be1-c00d-483d-acda-28897b9633ff") - ) - (segment - (start 118.99605 90.7269) - (end 118.62555 90.3564) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "56f4a2e7-368d-4e10-8b5f-3631084c2a7f") - ) - (segment - (start 118.62555 90.3564) - (end 110.87825 90.3564) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "5a379c11-11f5-46a9-a0bf-994a1797f3ee") - ) - (segment - (start 99.15985 79.0596) - (end 99.15985 77.6544) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "5d61a319-8334-4d95-af7e-1fcb818fc9a4") - ) - (segment - (start 99.15985 77.6544) - (end 99.08435 77.5789) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "67229b91-7bf2-46ff-87d2-2930d5958e0c") - ) - (segment - (start 125.04795 90.5127) - (end 124.85205 90.7086) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "6f3a1d94-62af-4fd7-aba7-97e57bfe7364") - ) - (segment - (start 172.69165 133.6357) - (end 129.56865 90.5127) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "75c16673-2957-400f-905f-44077be2347b") - ) - (segment - (start 110.87825 90.3564) - (end 103.74265 83.2208) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "ad1f5f2f-61fe-4496-b345-56185fae9726") - ) - (segment - (start 103.74265 83.2208) - (end 103.32105 83.2208) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "b5afc6c6-940d-4e3e-b68f-57f74b53dacb") - ) - (segment - (start 123.23875 90.7269) - (end 118.99605 90.7269) - (width 1) - (layer "In2.Cu") - (net "24V_IN") - (uuid "bf289fcb-3a0c-4a45-a26b-7b39a2b2a1ff") + (net "/24V_IN") + (uuid "1b30b5d7-5231-4caa-a60f-bf314beeb629") ) (segment (start 99.08435 70.0522) (end 91.07055 62.0384) (width 1) (layer "In2.Cu") - (net "24V_IN") - (uuid "c9433c2d-5295-44d1-8fc8-0b0d083a5662") + (net "/24V_IN") + (uuid "1e07df93-0b9d-4e67-94d2-a00ae45cdd42") + ) + (segment + (start 103.32105 83.2208) + (end 99.15985 79.0596) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "2c5538c5-8028-4a28-addc-3e8364254c1c") + ) + (segment + (start 103.74265 83.2208) + (end 103.32105 83.2208) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "3420923c-4038-4982-8190-dca9f12aa864") + ) + (segment + (start 99.15985 77.6544) + (end 99.08435 77.5789) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "442fd716-3c96-4f00-a0d2-7a7b54bb035f") + ) + (segment + (start 118.62555 90.3564) + (end 110.87825 90.3564) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "4a0262e9-23d3-4ede-85e5-ca60d3101cf5") + ) + (segment + (start 129.6627 90.5127) + (end 166.5 127.35) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "558048d4-6bb0-4033-9908-bc520267070a") + ) + (segment + (start 124.85205 90.7086) + (end 124.85195 90.7086) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "56a73bf5-4fdc-4c94-b449-0e375947d9dd") + ) + (segment + (start 123.23875 90.7269) + (end 118.99605 90.7269) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "613f3959-498d-48bc-82c5-122a602df93e") + ) + (segment + (start 129.6627 90.5127) + (end 125.04795 90.5127) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "64a0eb91-06d8-4505-b34b-8f1228a8fc73") ) (segment (start 99.08435 77.5789) (end 99.08435 70.0522) (width 1) (layer "In2.Cu") - (net "24V_IN") - (uuid "d2a4e0ec-37bb-4097-9e43-e657f544ebe5") + (net "/24V_IN") + (uuid "77eb2ed0-1d7e-4364-90a9-93fec60f091b") ) (segment - (start 129.56865 90.5127) - (end 125.04795 90.5127) + (start 124.46935 90.326) + (end 123.63965 90.326) (width 1) (layer "In2.Cu") - (net "24V_IN") - (uuid "dd18f596-b0a5-4910-8e83-c5ced4396e25") + (net "/24V_IN") + (uuid "9091397f-0aad-44fb-97f5-bcaac1912d86") ) (segment - (start 172.69165 133.8231) - (end 172.69165 133.6357) + (start 99.15985 79.0596) + (end 99.15985 77.6544) (width 1) (layer "In2.Cu") - (net "24V_IN") - (uuid "f79cd0f1-bb56-4724-825d-115715079281") + (net "/24V_IN") + (uuid "91efe161-5247-448f-a936-a85185287f3c") + ) + (segment + (start 166.5 127.35) + (end 172.6 127.35) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "9534156d-0704-4f60-aff4-b0daacb8069c") + ) + (segment + (start 110.87825 90.3564) + (end 103.74265 83.2208) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "abe1b95c-8365-422a-bf6e-8173f50c6f06") + ) + (segment + (start 118.99605 90.7269) + (end 118.62555 90.3564) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "b6441c88-7f68-40b1-9e52-16c65f42881a") + ) + (segment + (start 172.6 133.73145) + (end 172.69165 133.8231) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "bb55deb7-bf8e-454f-b263-b5cc46c02221") + ) + (segment + (start 124.85195 90.7086) + (end 124.46935 90.326) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "d60f67a6-8218-4537-afbf-8c1f254ff71b") + ) + (segment + (start 123.63965 90.326) + (end 123.23875 90.7269) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "e2fe8916-5c9f-45bb-a167-9129913af9d3") + ) + (segment + (start 125.04795 90.5127) + (end 124.85205 90.7086) + (width 1) + (layer "In2.Cu") + (net "/24V_IN") + (uuid "fb6b5f3a-3953-44bd-9a3b-1ea158b8bbb0") ) (segment (start 173.97815 49.6616) @@ -37182,39 +41758,55 @@ (end 164.50135 60.3251) (width 0.2) (layer "F.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "1dcfbc40-b52b-4b78-9aac-17b14f6af04f") ) - (segment - (start 155.56265 61.1613) - (end 148.02845 61.1613) - (width 0.2) - (layer "F.Cu") - (net "BASE_LS") - (uuid "2c0fa492-2a59-46b1-b5b5-2d574ace49cf") - ) (segment (start 164.69165 59.3231) (end 164.69165 60.1348) (width 0.2) (layer "F.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "2e25bb00-f15a-4c0f-9371-34b0aea398f9") ) (segment - (start 148.02845 61.1613) - (end 145.81665 63.3731) + (start 145.4875 58.275) + (end 144.5125 59.25) (width 0.2) (layer "F.Cu") - (net "BASE_LS") - (uuid "7e348acd-ecd3-4872-9ae5-c484051f957c") + (net "/BASE_LS") + (uuid "876f476f-13ad-47fd-af91-6e6f9ba1cc36") + ) + (segment + (start 155.56265 61.1613) + (end 151.4613 61.1613) + (width 0.2) + (layer "F.Cu") + (net "/BASE_LS") + (uuid "a04ed3cd-d2b6-4865-b4e5-57d89b5b5e5f") + ) + (segment + (start 148.575 58.275) + (end 151.4613 61.1613) + (width 0.2) + (layer "F.Cu") + (net "/BASE_LS") + (uuid "ca42f24f-de22-4bbf-a81b-38542059d7bc") + ) + (segment + (start 148.575 58.275) + (end 145.4875 58.275) + (width 0.2) + (layer "F.Cu") + (net "/BASE_LS") + (uuid "e114699d-2f12-4190-87ce-0f35ef63334b") ) (via (at 164.50135 60.3251) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "02897373-d469-45b4-bdd3-9b79b4b77d78") ) (via @@ -37222,7 +41814,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "731c7810-b9a3-4962-9c98-acd83222f96a") ) (segment @@ -37230,7 +41822,7 @@ (end 155.94905 61.5477) (width 0.2) (layer "B.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "07329e1c-153d-46ef-85b3-15c9cbfbb6db") ) (segment @@ -37238,7 +41830,7 @@ (end 164.50135 60.3251) (width 0.2) (layer "B.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "5625cd54-f0f6-48fd-9268-9c224fb7ed4b") ) (segment @@ -37246,7 +41838,7 @@ (end 161.75235 60.3251) (width 0.2) (layer "B.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "8683a94b-5e33-40df-8b2d-2e4086155a8e") ) (segment @@ -37254,7 +41846,7 @@ (end 160.52975 61.5477) (width 0.2) (layer "B.Cu") - (net "BASE_LS") + (net "/BASE_LS") (uuid "f2921f9f-a8f6-46b0-a7d1-362422c12e36") ) (segment @@ -37262,7 +41854,7 @@ (end 172.72205 49.7927) (width 0.2) (layer "F.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "4e1d3f71-c705-4eba-87eb-b1ce7770c80c") ) (segment @@ -37270,7 +41862,7 @@ (end 174.69165 45.3231) (width 0.2) (layer "F.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "68a906d1-5591-4b1d-a4a7-cb54b3e6fd42") ) (segment @@ -37278,7 +41870,7 @@ (end 176.26665 45.3231) (width 0.2) (layer "F.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "8c26dccb-39e8-4504-ae77-aa9d6302b422") ) (segment @@ -37286,7 +41878,7 @@ (end 173.37215 49.7927) (width 0.2) (layer "F.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "8d00e06b-55ae-4ea4-91b3-9a983c77c05d") ) (segment @@ -37294,7 +41886,7 @@ (end 176.56625 45.3231) (width 0.2) (layer "F.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "b6c11263-3e5f-4210-b04f-20869f8bdbcb") ) (via @@ -37302,7 +41894,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "5d2cfb72-ff3f-4005-b87c-27cb880b4938") ) (via @@ -37310,7 +41902,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "af8c1c89-3dd8-4320-bd6e-b2e54c6c7e2c") ) (segment @@ -37318,7 +41910,7 @@ (end 174.05465 49.7927) (width 0.2) (layer "In2.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "59a987cb-37f4-4fcf-ac33-a0ccba0c850a") ) (segment @@ -37326,7 +41918,7 @@ (end 177.54525 46.3021) (width 0.2) (layer "In2.Cu") - (net "FB_FAN") + (net "/FB_FAN") (uuid "952a5042-920d-499b-8242-37ea4c4b9bac") ) (segment @@ -37390,7 +41982,7 @@ (end 121.42795 72.5668) (width 0.2) (layer "B.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "26221ba8-ea61-4903-8bd9-6a749036a40d") ) (segment @@ -37398,7 +41990,7 @@ (end 194.36415 55.8656) (width 0.2) (layer "B.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "30f88c98-5747-4fd0-90f9-43d1523eec37") ) (segment @@ -37406,7 +41998,7 @@ (end 170.60335 72.5668) (width 0.2) (layer "B.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "9a8cfb92-03f4-4161-8da4-efbcda13fbab") ) (segment @@ -37414,7 +42006,7 @@ (end 188.58515 61.6446) (width 0.2) (layer "B.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "a49af548-0e0b-4dc9-ae4b-71f6b7f52949") ) (segment @@ -37422,7 +42014,7 @@ (end 181.52555 61.6446) (width 0.2) (layer "B.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "f7b1944e-1fab-4523-be26-c523590d7b91") ) (segment @@ -37430,7 +42022,7 @@ (end 111.06165 65.2731) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "241102c8-f928-4fc8-bd63-64b49733e517") ) (segment @@ -37438,7 +42030,7 @@ (end 110.90365 47.4748) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "48f8b472-fa0b-412b-821b-1e32f9b178af") ) (segment @@ -37446,7 +42038,7 @@ (end 110.03995 53.5979) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "6e239211-dece-4146-b51f-f1a7f93c1362") ) (segment @@ -37454,7 +42046,7 @@ (end 111.19165 47.4748) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "7f25d2bf-6e6b-48fb-a6dd-05fa42efeb53") ) (segment @@ -37462,7 +42054,7 @@ (end 111.06165 54.6196) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "9032f0f7-f2ba-4dde-8ea5-b4af37bb6017") ) (segment @@ -37470,7 +42062,7 @@ (end 119.89165 74.1031) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "d7cf3c48-a288-40c8-9220-aa976fcd651d") ) (segment @@ -37478,7 +42070,7 @@ (end 110.03995 48.3385) (width 0.2) (layer "In2.Cu") - (net "USART1_TX") + (net "/USART1_TX") (uuid "f612841b-d757-4836-90e2-997a7b813d7d") ) (segment @@ -37486,31 +42078,39 @@ (end 131.31935 83.5427) (width 1) (layer "F.Cu") - (net "SW_BAT") + (net "/SW_BAT") (uuid "50653aee-ab80-4854-afc9-8aa2b4cb6e26") ) (segment (start 163.79165 104.8231) - (end 163.79165 91.8631) + (end 163.79165 91.85835) (width 1.5) (layer "F.Cu") - (net "SW_BAT") - (uuid "91120d07-79eb-4ca9-a303-909bbdeb5de8") + (net "/SW_BAT") + (uuid "77219332-58ff-4107-8625-b67a51ea2abe") ) (segment (start 122.24165 88.6331) (end 122.24165 91.8731) (width 0.2502) (layer "F.Cu") - (net "SW_BAT") + (net "/SW_BAT") (uuid "c8386440-6537-469e-8fac-9bcd921fdf77") ) + (segment + (start 163.79165 91.85835) + (end 163.8 91.85) + (width 1.5) + (layer "F.Cu") + (net "/SW_BAT") + (uuid "dc943bca-fdd0-4753-a153-ccadafb8654d") + ) (segment (start 122.24165 91.8731) (end 121.74165 91.8731) (width 0.2502) (layer "F.Cu") - (net "SW_BAT") + (net "/SW_BAT") (uuid "e4a95ef0-6606-48f5-9684-af4f4cfe153f") ) (segment @@ -37518,15 +42118,15 @@ (end 127.33205 83.5427) (width 1) (layer "F.Cu") - (net "SW_BAT") + (net "/SW_BAT") (uuid "f7249bf4-a011-41ed-a6bc-9cb5b0340b48") ) (via - (at 163.79165 91.8631) + (at 163.8 91.85) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_BAT") + (net "/SW_BAT") (uuid "cb32a632-97de-4caa-8a54-f20a6e5e83b0") ) (via @@ -37534,47 +42134,47 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "SW_BAT") + (net "/SW_BAT") (uuid "f9ea29eb-54e2-4e4c-b066-0b5c6b8c84e1") ) (segment - (start 131.31935 83.5427) - (end 134.09045 83.5427) + (start 163.8 91.85) + (end 163.787 91.863) (width 1.5) (layer "B.Cu") - (net "SW_BAT") - (uuid "267aa280-1721-49c6-8f8c-9de11af6d199") + (net "/SW_BAT") + (uuid "1999ef53-dbc6-4f18-92ed-44f784497441") ) (segment (start 134.09045 83.5427) - (end 142.41075 91.863) + (end 131.31935 83.5427) (width 1.5) (layer "B.Cu") - (net "SW_BAT") - (uuid "2dfca2a2-bfd9-49a7-9357-a7535df1345a") + (net "/SW_BAT") + (uuid "4be9b2bd-635d-498f-8fff-26a1d574721f") ) (segment (start 142.41075 91.863) - (end 163.79165 91.863) + (end 134.09045 83.5427) (width 1.5) (layer "B.Cu") - (net "SW_BAT") - (uuid "3b6d96ea-2ced-4179-8943-b722a2b1fd51") + (net "/SW_BAT") + (uuid "ca6c3209-64d9-49ec-b13f-d2783599e541") ) (segment - (start 163.79165 91.863) - (end 163.79165 91.8631) + (start 163.787 91.863) + (end 142.41075 91.863) (width 1.5) (layer "B.Cu") - (net "SW_BAT") - (uuid "e477eae9-7f3c-4654-b1a6-fafc68a5e725") + (net "/SW_BAT") + (uuid "def9fba8-5c19-4852-bf70-7992724c684e") ) (segment (start 112.27165 74.1031) (end 113.42895 75.2604) (width 0.2) (layer "F.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "214b2cba-d4cd-4dca-9a3c-00e4aadd7c2c") ) (segment @@ -37582,7 +42182,7 @@ (end 201.25975 48.4925) (width 0.2) (layer "F.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "7a89c000-73a7-4707-b8de-c76770f8bad6") ) (segment @@ -37590,7 +42190,7 @@ (end 200.00725 48.4925) (width 0.2) (layer "F.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "bbdc42b3-7440-4826-81f7-fce338dc1fd2") ) (segment @@ -37598,7 +42198,7 @@ (end 166.52705 75.2604) (width 0.2) (layer "F.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "ee4d66c9-a436-4c51-ba13-2b4e215cbaba") ) (via @@ -37606,7 +42206,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "058f0186-aeac-43de-b587-7e83eb6c24aa") ) (via @@ -37614,7 +42214,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "a09909df-f22f-4a0e-88d4-c45050a8b07f") ) (segment @@ -37622,7 +42222,7 @@ (end 193.56145 48.226) (width 0.2) (layer "In2.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "02ed9237-8c46-4332-99f4-e6e993a66506") ) (segment @@ -37630,7 +42230,7 @@ (end 166.52705 75.2604) (width 0.2) (layer "In2.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "34efba72-998d-4c60-b3fe-48502a58d938") ) (segment @@ -37638,7 +42238,7 @@ (end 199.74075 48.226) (width 0.2) (layer "In2.Cu") - (net "BATLED3") + (net "/BATLED3") (uuid "41a9ae16-105d-43fc-ba5c-d31a51f27eaa") ) (segment @@ -37646,7 +42246,7 @@ (end 203.07915 44.4356) (width 0.2) (layer "F.Cu") - (net "BLED3") + (net "/BLED3") (uuid "14077c2e-940f-47e8-a548-15b0fcadc620") ) (segment @@ -37654,7 +42254,7 @@ (end 203.07915 48.3231) (width 0.2) (layer "F.Cu") - (net "BLED3") + (net "/BLED3") (uuid "8952a8c0-0abf-4992-b7e3-88d94d2369dc") ) (segment @@ -37662,7 +42262,7 @@ (end 115.02565 93.8231) (width 0.2) (layer "F.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "11a4f551-ce5c-4761-a570-fd60995b73ca") ) (segment @@ -37670,7 +42270,7 @@ (end 113.19165 107.3231) (width 0.2) (layer "F.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "afd6b4e5-7d3e-43d7-90a8-2af4f50fb1cc") ) (segment @@ -37678,7 +42278,7 @@ (end 114.64655 94.2022) (width 0.2) (layer "F.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "fea36a80-474e-40ee-bea4-c792b1c16a63") ) (via @@ -37686,7 +42286,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "81cd8004-3f45-48fa-8bf9-05845cfefb78") ) (via @@ -37694,7 +42294,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "d4bf982f-0dcc-4a33-8556-8e8822844496") ) (segment @@ -37702,7 +42302,7 @@ (end 114.64655 94.2022) (width 0.2) (layer "In2.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "46bf5961-94c6-427d-bb32-0a33ce36e29b") ) (segment @@ -37710,7 +42310,7 @@ (end 112.89895 105.7518) (width 0.2) (layer "In2.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "6859699d-a413-481e-ae46-ca9e1c6fb9dd") ) (segment @@ -37718,7 +42318,7 @@ (end 113.19835 93.8271) (width 0.2) (layer "In2.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "ab251c08-a8b7-4628-bc6c-df4d76f16fe1") ) (segment @@ -37726,7 +42326,7 @@ (end 112.89895 94.1265) (width 0.2) (layer "In2.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "b0d9475a-e0a1-4cde-aa70-82719ce5ed79") ) (segment @@ -37734,41 +42334,9 @@ (end 114.27145 93.8271) (width 0.2) (layer "In2.Cu") - (net "CLPROG_TP") + (net "/CLPROG_TP") (uuid "ed2199d3-a176-44ae-9339-0fefd2123da0") ) - (segment - (start 196.54165 84.8231) - (end 199.1231 84.8231) - (width 0.2) - (layer "F.Cu") - (net "unconnected-(J8-Pin_6-Pad6)") - (uuid "13665b7e-e87c-4bdd-a6d6-bb4cba315571") - ) - (segment - (start 199.1231 84.8231) - (end 199.15 84.85) - (width 0.2) - (layer "F.Cu") - (net "unconnected-(J8-Pin_6-Pad6)") - (uuid "a1f903c5-ac65-4cd6-918f-899cbf21a84e") - ) - (segment - (start 199.1 92.85) - (end 199.0731 92.8231) - (width 0.2) - (layer "F.Cu") - (net "unconnected-(J8-Pin_10-Pad10)") - (uuid "14b27b03-9c65-4fc4-902a-71affa64e90a") - ) - (segment - (start 196.54165 92.8231) - (end 199.0731 92.8231) - (width 0.2) - (layer "F.Cu") - (net "unconnected-(J8-Pin_10-Pad10)") - (uuid "242cd235-e6f7-46f8-930f-ae07cc5a9db7") - ) (segment (start 166.74165 52.0931) (end 165.42305 52.0931) @@ -37785,6 +42353,14 @@ (net "FREQ_FAN") (uuid "b72b08d3-f1a7-4bca-ab02-cd6a4e0c7311") ) + (segment + (start 100.12915 62.4531) + (end 104.27605 66.6) + (width 1) + (layer "F.Cu") + (net "24V") + (uuid "1062f0cb-90ee-4889-8e7a-5209fede3f4c") + ) (segment (start 98.85685 63.7254) (end 100.12915 62.4531) @@ -37810,12 +42386,12 @@ (uuid "20ddf88c-bc4f-4b7f-9051-76bdcf364df9") ) (segment - (start 100.12915 62.4531) - (end 103.95305 66.277) + (start 104.27605 66.6) + (end 155.85 66.6) (width 1) (layer "F.Cu") (net "24V") - (uuid "35efb049-23b2-41da-92c9-5e5f14b68cad") + (uuid "3929b879-0fc6-463d-853c-e7b4e8a24f58") ) (segment (start 164.68965 54.0936) @@ -37849,14 +42425,6 @@ (net "24V") (uuid "4c14d232-3dc1-4967-bbd0-f2c880ffb1ed") ) - (segment - (start 155.24815 66.277) - (end 159.42515 62.1) - (width 1) - (layer "F.Cu") - (net "24V") - (uuid "4dce71e0-b1b9-437b-8db9-081d43f1b69d") - ) (segment (start 163.46645 61.7597) (end 170.93005 61.7597) @@ -37921,14 +42489,6 @@ (net "24V") (uuid "8646451f-d26b-4681-a1ba-3614ccaae6fb") ) - (segment - (start 103.95305 66.277) - (end 155.24815 66.277) - (width 1) - (layer "F.Cu") - (net "24V") - (uuid "8db0a445-53ad-4ca3-913a-202bf33cecbe") - ) (segment (start 161.41665 51.2231) (end 159.94205 52.6977) @@ -37969,6 +42529,14 @@ (net "24V") (uuid "d548d635-f931-4d61-b73b-5320e4f1cfae") ) + (segment + (start 155.85 66.6) + (end 159.42515 63.02485) + (width 1) + (layer "F.Cu") + (net "24V") + (uuid "dfc03441-7943-4bed-a5e7-9392969024d8") + ) (segment (start 86.99165 63.7254) (end 86.99165 71.8231) @@ -37977,6 +42545,14 @@ (net "24V") (uuid "e521e349-cf26-445b-be46-d020e849c566") ) + (segment + (start 159.42515 63.02485) + (end 159.42515 62.1) + (width 1) + (layer "F.Cu") + (net "24V") + (uuid "e53339a1-8437-4048-9e51-bf27ccbe2939") + ) (segment (start 83.26415 61.9782) (end 85.01135 63.7254) @@ -38022,7 +42598,7 @@ (end 183.64475 51.5991) (width 0.2) (layer "F.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "36b8727a-03af-4ced-8214-28ad3afb8e60") ) (segment @@ -38030,7 +42606,7 @@ (end 157.82315 71.9503) (width 0.2) (layer "F.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "50986540-4ccc-4691-b0c5-f2e2d7e5b1a0") ) (segment @@ -38038,7 +42614,7 @@ (end 116.96445 71.9503) (width 0.2) (layer "F.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "51602aef-20f6-4589-913d-fc12518e371a") ) (segment @@ -38046,7 +42622,7 @@ (end 169.83095 65.5975) (width 0.2) (layer "F.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "aba8aaa8-114b-4338-9558-49c1bc4a0d04") ) (segment @@ -38054,7 +42630,7 @@ (end 202.15315 51.5991) (width 0.2) (layer "F.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "ac09512b-7133-448a-a4a9-dc60cd77d468") ) (segment @@ -38062,7 +42638,7 @@ (end 164.17595 65.5975) (width 0.2) (layer "F.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "ba6a7e59-54cc-479f-a20d-c0cb09cedf43") ) (via @@ -38070,7 +42646,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "79515fb0-876d-4b53-bfe6-b8c04735edb8") ) (via @@ -38078,7 +42654,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "8db5757c-7128-48ee-9ca3-65f36ce90e41") ) (segment @@ -38086,7 +42662,7 @@ (end 183.64475 51.5991) (width 0.2) (layer "In2.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "53518314-4a27-4c6c-9360-46b00b7af347") ) (segment @@ -38094,7 +42670,7 @@ (end 183.64475 51.7837) (width 0.2) (layer "In2.Cu") - (net "BATLED4") + (net "/BATLED4") (uuid "cb6e1a97-1130-42e4-b791-bc3fe0adfaef") ) (segment @@ -38102,7 +42678,7 @@ (end 207.07915 44.4356) (width 0.2) (layer "F.Cu") - (net "BLED4") + (net "/BLED4") (uuid "b81cf9a1-b047-4ddb-9a6b-83f062d05778") ) (segment @@ -38110,15 +42686,31 @@ (end 207.07915 48.3231) (width 0.2) (layer "F.Cu") - (net "BLED4") + (net "/BLED4") (uuid "d40c4266-e96d-4e24-bd77-384b862aa1d2") ) + (segment + (start 162.875 129.425) + (end 162.875 127.025) + (width 0.2) + (layer "F.Cu") + (net "/USB_CC1") + (uuid "8c492735-fdc5-4e62-ae8a-adcf100a2de4") + ) + (segment + (start 162.875 127.025) + (end 161.425 125.575) + (width 0.2) + (layer "F.Cu") + (net "/USB_CC1") + (uuid "a0c9d9c8-dc10-492d-81bc-6b8d8893af36") + ) (segment (start 124.83165 95.9231) (end 124.70165 95.7931) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "10d094a1-cd5c-4904-a715-f061a1953674") ) (segment @@ -38126,7 +42718,7 @@ (end 141.54085 98.7714) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "15511738-308e-4e0c-8d91-b98f78fb7dc4") ) (segment @@ -38134,7 +42726,7 @@ (end 123.69165 95.3231) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "65a07871-a2b8-4a63-b030-cc52020d5194") ) (segment @@ -38142,7 +42734,7 @@ (end 141.74275 98.5695) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "67c8f8ae-9ffb-42d9-ae80-645e11d737f6") ) (segment @@ -38150,7 +42742,7 @@ (end 124.69645 95.7331) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "6f6c2cc8-4415-4aab-9e65-04cc734815fe") ) (segment @@ -38158,7 +42750,7 @@ (end 124.83165 95.9231) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "732087fe-ee0d-4d1a-b8aa-43ff764cb350") ) (segment @@ -38166,7 +42758,7 @@ (end 124.28645 95.3231) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "80dd073b-bb25-4e9a-a70d-dbdc0e2d41a9") ) (segment @@ -38174,7 +42766,7 @@ (end 124.69645 95.7879) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "97f138cf-1389-4ca5-906e-334254dd0282") ) (segment @@ -38182,7 +42774,7 @@ (end 124.70165 95.7231) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "a73ad41c-9497-4c6e-9928-de87f2e1b962") ) (segment @@ -38190,7 +42782,7 @@ (end 141.39165 98.7714) (width 0.2) (layer "F.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "dbcf5845-149d-4aac-ba81-d1d96f8d116f") ) (via @@ -38198,7 +42790,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "a3c056bc-3bb6-44ad-b8a8-0f672face1b2") ) (via @@ -38206,7 +42798,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "dfe33747-48b9-47e7-b4ee-241a162d302a") ) (segment @@ -38214,7 +42806,7 @@ (end 125.36475 95.6259) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "1bd407b2-87a9-4f10-bdd4-545cc2d95ae4") ) (segment @@ -38222,7 +42814,7 @@ (end 141.65665 98.5695) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "22f14702-e8c8-47df-a9e8-350aa6470f11") ) (segment @@ -38230,7 +42822,7 @@ (end 131.36025 95.0128) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "37062bc8-4ff0-40e6-a24b-c477960fcac4") ) (segment @@ -38238,7 +42830,7 @@ (end 129.53395 95.0128) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "42709788-2616-4d01-9f4c-27b7ecbff37f") ) (segment @@ -38246,7 +42838,7 @@ (end 136.26035 94.4911) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "44216f7a-0af6-475f-9f10-234fc863a4cc") ) (segment @@ -38254,7 +42846,7 @@ (end 137.57945 94.4923) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "45101b5a-aef8-4202-b37e-64f77df21b61") ) (segment @@ -38262,7 +42854,7 @@ (end 127.75655 94.6467) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "50f019cb-97ae-48aa-a209-6df60e140c7b") ) (segment @@ -38270,7 +42862,7 @@ (end 141.74275 98.5695) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "51bde4cf-6ba8-4aad-b5ec-1f0af3987de6") ) (segment @@ -38278,7 +42870,7 @@ (end 128.00235 94.8925) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "602ff8e3-dd83-4011-a6fd-e938c49fb88d") ) (segment @@ -38286,7 +42878,7 @@ (end 131.88075 94.4923) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "616017b4-9ccf-4bac-a5b8-4bc8c8ce45f2") ) (segment @@ -38294,7 +42886,7 @@ (end 129.41365 94.8925) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "66ea7c9e-7f63-4d5f-a218-c3dffccb8b4e") ) (segment @@ -38302,7 +42894,7 @@ (end 137.09125 94.4911) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "72da17b0-2623-4817-9b52-03fe2bf139b3") ) (segment @@ -38310,7 +42902,7 @@ (end 126.34395 94.6467) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "8e293d55-329e-457e-b170-9767de5e9c09") ) (segment @@ -38318,7 +42910,7 @@ (end 125.07165 95.6331) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "91a0ff54-27cb-4589-99b7-49b9c59c1c15") ) (segment @@ -38326,7 +42918,7 @@ (end 136.25915 94.4923) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "9a647ccb-3672-45a2-bd1f-f6b3f35d0e10") ) (segment @@ -38334,7 +42926,7 @@ (end 125.07885 95.6259) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "9d0514e2-7c6b-4c88-a8ca-872d4408e543") ) (segment @@ -38342,7 +42934,7 @@ (end 124.75165 95.6831) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "a78050cc-3e46-4563-8ce1-b121fd9377f8") ) (segment @@ -38350,7 +42942,7 @@ (end 124.75165 95.8531) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "acf75dd8-586b-4cfe-ae58-73b5810704b3") ) (segment @@ -38358,7 +42950,7 @@ (end 124.80165 95.6331) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "cada5c22-5d90-4168-8073-80c88fecb67b") ) (segment @@ -38366,7 +42958,7 @@ (end 137.09245 94.4923) (width 0.2) (layer "B.Cu") - (net "F0_SEL") + (net "/F0_SEL") (uuid "f89cf647-6917-4569-a381-0a16fab1d526") ) (segment @@ -38374,7 +42966,7 @@ (end 93.69165 106.6346) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "20372e99-c6a1-4753-8da6-3f75457aa30c") ) (segment @@ -38382,7 +42974,7 @@ (end 90.66385 116.8336) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "272fd3f1-7d46-4f51-b6fa-db8d041621ba") ) (segment @@ -38390,7 +42982,7 @@ (end 98.41645 117.1608) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "8e86905b-0a4c-4ca3-940a-9fefeeb21643") ) (segment @@ -38398,7 +42990,7 @@ (end 100.25845 117.3274) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "9bb78561-61b5-49ec-83bf-1b5eadf0ae1a") ) (segment @@ -38406,7 +42998,7 @@ (end 99.25415 116.3231) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "be1e7431-b7f1-42d2-a48b-f3457eef5d56") ) (segment @@ -38414,7 +43006,7 @@ (end 106.75035 117.3274) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "d7b93076-41ba-4c30-8601-66408b17e05f") ) (segment @@ -38422,7 +43014,7 @@ (end 110.96935 113.1084) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "da4f17b6-9577-4857-88dd-5743c6908d95") ) (segment @@ -38430,7 +43022,7 @@ (end 90.66385 109.6624) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "dd089fae-f2f9-4860-bae2-0877949d5d5a") ) (segment @@ -38438,7 +43030,7 @@ (end 90.99105 117.1608) (width 0.2) (layer "F.Cu") - (net "LED_K") + (net "/LED_K") (uuid "e8d43848-c4f7-4cd8-81cd-078949e7fc1c") ) (via @@ -38446,7 +43038,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "LED_K") + (net "/LED_K") (uuid "6412847c-b514-4700-b113-dc90603a8bcf") ) (via @@ -38454,7 +43046,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "LED_K") + (net "/LED_K") (uuid "e8b5986a-73ce-466d-9d92-8c43e41d3e9e") ) (segment @@ -38462,7 +43054,7 @@ (end 134.53575 108.033) (width 0.2) (layer "B.Cu") - (net "LED_K") + (net "/LED_K") (uuid "336ca658-9911-4cd6-9c5a-80b2b29d8414") ) (segment @@ -38470,7 +43062,7 @@ (end 113.35975 110.718) (width 0.2) (layer "B.Cu") - (net "LED_K") + (net "/LED_K") (uuid "8f06b18e-2552-4dc1-aa23-34b181df927e") ) (segment @@ -38478,7 +43070,7 @@ (end 131.85075 110.718) (width 0.2) (layer "B.Cu") - (net "LED_K") + (net "/LED_K") (uuid "b92731b1-93f1-4d56-aa36-1dc6331c9796") ) (segment @@ -38486,7 +43078,7 @@ (end 173.94695 108.033) (width 0.2) (layer "B.Cu") - (net "LED_K") + (net "/LED_K") (uuid "d1649bbe-275f-4342-8f97-1427b1d5c4a5") ) (segment @@ -38494,7 +43086,7 @@ (end 194.15685 87.8231) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "5ca46987-f354-4fd6-938a-2bd232d4c786") ) (segment @@ -38502,7 +43094,7 @@ (end 197.76075 87.0542) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "5e160b4e-94f8-4269-87f9-196a8a952913") ) (segment @@ -38510,7 +43102,7 @@ (end 208.86185 71.562) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "9985d911-c741-4857-9612-17103f03a3ee") ) (segment @@ -38518,7 +43110,7 @@ (end 173.94695 108.033) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "a0be930f-8cf8-4867-acab-8e7d727366ee") ) (segment @@ -38526,7 +43118,7 @@ (end 197.76075 82.6631) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "a353a6b3-8b8f-4867-83e8-c794010daa3a") ) (segment @@ -38534,7 +43126,7 @@ (end 196.99185 87.8231) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "a4f21b8f-0840-4ee7-8418-c81496adf1e7") ) (segment @@ -38542,7 +43134,7 @@ (end 209.38345 69.4748) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "c3943b99-ae22-4dc4-b79d-b6c4d5398ba9") ) (segment @@ -38550,7 +43142,7 @@ (end 208.86185 69.9964) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "d3a4c9b4-58ec-4111-b601-1dceb6b3dfaa") ) (segment @@ -38558,7 +43150,7 @@ (end 210.16665 69.4748) (width 0.2) (layer "In2.Cu") - (net "LED_K") + (net "/LED_K") (uuid "e8c074ff-4ea8-4dae-890a-4bdeae551226") ) (segment @@ -38566,7 +43158,7 @@ (end 177.36665 64.8231) (width 0.2) (layer "F.Cu") - (net "Q6_BASE") + (net "/Q6_BASE") (uuid "6fd27d98-71a9-4e65-83a2-56a7bfc576c7") ) (segment @@ -38574,7 +43166,7 @@ (end 177.36665 69.1481) (width 0.2) (layer "F.Cu") - (net "Q6_BASE") + (net "/Q6_BASE") (uuid "92ed7d89-3a7f-4a2e-b531-52b02752ca52") ) (segment @@ -38582,7 +43174,7 @@ (end 179.81665 62.3731) (width 0.2) (layer "F.Cu") - (net "Q6_BASE") + (net "/Q6_BASE") (uuid "bdc28c4c-35bb-4dad-8b48-957a9c717786") ) (segment @@ -38590,7 +43182,7 @@ (end 177.36665 64.8231) (width 0.2) (layer "F.Cu") - (net "Q6_BASE") + (net "/Q6_BASE") (uuid "fd2f1e1f-65d3-4316-af55-d38051e4e645") ) (segment @@ -38598,7 +43190,7 @@ (end 196.92455 48.8277) (width 0.2) (layer "F.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "010c9561-ca66-4fce-9554-96314820764e") ) (segment @@ -38606,7 +43198,7 @@ (end 196.01795 48.8277) (width 0.2) (layer "F.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "e2a883cd-5158-4381-b14c-4efa2b53953c") ) (via @@ -38614,7 +43206,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "53a02531-54e9-429e-96c1-aef256f0eef5") ) (via @@ -38622,7 +43214,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "db58b4b5-427a-43d1-81d8-c4fc85d368c9") ) (segment @@ -38630,7 +43222,7 @@ (end 181.69345 60.9614) (width 0.2) (layer "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "022ac58f-ee6f-4644-8b70-617f60ac1301") ) (segment @@ -38638,7 +43230,7 @@ (end 129.66955 62.3511) (width 0.2) (layer "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "398e93c4-e6cd-4030-b1c4-8badc601282a") ) (segment @@ -38646,7 +43238,7 @@ (end 180.24955 62.3511) (width 0.2) (layer "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "8a9cb772-2854-4bff-a45b-1a079ae454e1") ) (segment @@ -38654,7 +43246,7 @@ (end 181.63925 60.9614) (width 0.2) (layer "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "96662908-abdc-4b5a-b049-cabf9cc4a2d2") ) (segment @@ -38662,7 +43254,7 @@ (end 110.88335 72.9514) (width 0.2) (layer "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "b49b3db6-30cc-40d5-a835-8efebc7d1b71") ) (segment @@ -38670,7 +43262,7 @@ (end 119.06925 72.9514) (width 0.2) (layer "B.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "e5b74f69-6856-4bad-b21b-9ee154802760") ) (segment @@ -38678,7 +43270,7 @@ (end 193.82715 48.8277) (width 0.2) (layer "In2.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "97dc23ef-b392-480e-bc8e-cb63bf846353") ) (segment @@ -38686,9 +43278,81 @@ (end 181.69345 60.9614) (width 0.2) (layer "In2.Cu") - (net "BATLED2") + (net "/BATLED2") (uuid "cb476e6e-9c36-4fa3-9339-b3a59dc9ed63") ) + (segment + (start 167.475 125.575) + (end 165.4 125.575) + (width 0.2) + (layer "F.Cu") + (net "/USB_CC2") + (uuid "0e6e64bf-b5b0-4414-9640-26cb5e013193") + ) + (segment + (start 167.5 125.6) + (end 167.475 125.575) + (width 0.2) + (layer "F.Cu") + (net "/USB_CC2") + (uuid "79a574cf-457a-43d6-9656-01367fa20037") + ) + (via + (at 167.5 125.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/USB_CC2") + (uuid "634a9c43-6100-40bc-b4b4-8a1093211202") + ) + (segment + (start 165.425 133.325) + (end 168.3 136.2) + (width 0.2) + (layer "In1.Cu") + (net "/USB_CC2") + (uuid "08bf97fd-805b-49ac-bc9a-76209873417f") + ) + (segment + (start 170.25 128.35) + (end 167.5 125.6) + (width 0.2) + (layer "In1.Cu") + (net "/USB_CC2") + (uuid "27dbfd56-30ec-47be-965d-d99c7592a049") + ) + (segment + (start 165.425 130.775) + (end 165.55 130.9) + (width 0.2) + (layer "In1.Cu") + (net "/USB_CC2") + (uuid "4a0a9f67-46e3-4b7c-8aa8-97d67932440b") + ) + (segment + (start 170.25 134.25) + (end 170.25 128.35) + (width 0.2) + (layer "In1.Cu") + (net "/USB_CC2") + (uuid "63eac947-e35e-4e1c-9f10-ffe4dc56944a") + ) + (segment + (start 165.425 130.775) + (end 165.425 133.325) + (width 0.2) + (layer "In1.Cu") + (net "/USB_CC2") + (uuid "ce2e0528-a1a0-4e69-a97e-8f1ffc718555") + ) + (segment + (start 168.3 136.2) + (end 170.25 134.25) + (width 0.2) + (layer "In1.Cu") + (net "/USB_CC2") + (uuid "db5bfdfa-ef67-4d2b-9a5d-9d77a2cece91") + ) (segment (start 104.03315 71.1646) (end 104.34535 71.1646) @@ -38790,7 +43454,7 @@ (end 123.69165 92.8231) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "593e4d81-539d-40e2-b843-dc8180514f8d") ) (segment @@ -38798,7 +43462,7 @@ (end 107.65445 82.3089) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "81d6446f-a30c-4515-9f1b-34c9a5987beb") ) (segment @@ -38806,7 +43470,7 @@ (end 106.50375 97.2363) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "81e3e607-f276-4145-a245-f9cb89f94e33") ) (segment @@ -38814,7 +43478,7 @@ (end 105.05775 82.4925) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "99732663-b9b3-4199-a947-e71b763d448a") ) (segment @@ -38822,7 +43486,7 @@ (end 106.50375 102.3231) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "b4493f77-ce5c-4c69-8af6-786419c02a4c") ) (segment @@ -38830,7 +43494,7 @@ (end 107.54165 102.3231) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "f42ae083-cf5a-4015-b17e-9bad08a99d6e") ) (segment @@ -38838,7 +43502,7 @@ (end 107.47085 82.4925) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "f8451ae6-dcd6-4c32-81a9-055cacee00d8") ) (segment @@ -38846,7 +43510,7 @@ (end 124.05445 92.4603) (width 0.2) (layer "F.Cu") - (net "PFI") + (net "/PFI") (uuid "fccd3e95-b210-4129-8767-2c3c98e13c58") ) (via @@ -38854,7 +43518,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PFI") + (net "/PFI") (uuid "1f03c42b-965e-4ff2-bc11-3f52f14c1d28") ) (via @@ -38862,7 +43526,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PFI") + (net "/PFI") (uuid "5cc1cfa1-a1b4-4805-9d07-cc54b4ccbfed") ) (via @@ -38870,7 +43534,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PFI") + (net "/PFI") (uuid "6107c648-54fc-4740-8075-0a75ef7ebc6f") ) (via @@ -38878,7 +43542,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PFI") + (net "/PFI") (uuid "c105c5d4-59d4-4e27-9040-5d37eba9fc14") ) (segment @@ -38886,7 +43550,7 @@ (end 124.05445 91.3277) (width 0.2) (layer "B.Cu") - (net "PFI") + (net "/PFI") (uuid "82b20d46-f4e9-47f0-857f-046109240a36") ) (segment @@ -38894,7 +43558,7 @@ (end 115.21125 82.4845) (width 0.2) (layer "B.Cu") - (net "PFI") + (net "/PFI") (uuid "aee9d72a-c9ff-48b2-b42d-e6242a21dfa1") ) (segment @@ -38902,7 +43566,7 @@ (end 107.83005 82.4845) (width 0.2) (layer "B.Cu") - (net "PFI") + (net "/PFI") (uuid "af6aa066-2a1c-4509-a171-c81c1c7b259a") ) (segment @@ -38910,7 +43574,7 @@ (end 103.32775 94.0603) (width 0.2) (layer "In2.Cu") - (net "PFI") + (net "/PFI") (uuid "8de7160f-9060-4a4b-8a6d-e0983cb9860d") ) (segment @@ -38918,71 +43582,95 @@ (end 103.32775 84.2225) (width 0.2) (layer "In2.Cu") - (net "PFI") + (net "/PFI") (uuid "91a2fd1e-52ab-4b3d-9991-0fe2650916d9") ) + (segment + (start 182.25415 64.2731) + (end 182.25415 66.05415) + (width 0.25) + (layer "F.Cu") + (net "/KCOIL") + (uuid "08100c53-8279-42f5-8043-c9932e7ff3ff") + ) + (segment + (start 201.46475 58.4) + (end 198.04165 61.8231) + (width 0.25) + (layer "F.Cu") + (net "/KCOIL") + (uuid "116fdaf5-5ab0-4afb-b829-703cc5f28890") + ) + (segment + (start 204.4 62.75) + (end 204.4 59.75) + (width 0.25) + (layer "F.Cu") + (net "/KCOIL") + (uuid "162d3b59-2cef-4282-9fc8-da8eb9802b54") + ) (segment (start 198.04165 61.8231) (end 197.78165 61.8231) (width 0.2) (layer "F.Cu") - (net "KCOIL") + (net "/KCOIL") (uuid "237ccb43-13ed-41be-ab67-0798f8129d96") ) (segment - (start 184.12915 63.3231) - (end 184.50585 62.9464) - (width 0.2) + (start 196.65 70.5) + (end 204.4 62.75) + (width 0.25) (layer "F.Cu") - (net "KCOIL") - (uuid "93861b1b-4375-40ef-8589-f4e06cf8317b") + (net "/KCOIL") + (uuid "45cbb360-8c66-4fe6-a17f-4cd1b8ee71a8") ) (segment - (start 184.50585 62.9464) - (end 187.98985 62.9464) - (width 0.2) + (start 182.25415 66.05415) + (end 186.7 70.5) + (width 0.25) (layer "F.Cu") - (net "KCOIL") - (uuid "b89fb24e-dc39-4180-8dfa-4991d4979d52") + (net "/KCOIL") + (uuid "a815ccf6-8c74-4f84-8181-9477a3eada97") + ) + (segment + (start 204.4 59.75) + (end 203.05 58.4) + (width 0.25) + (layer "F.Cu") + (net "/KCOIL") + (uuid "df87d9b6-d662-4e82-8129-f175c17c0574") + ) + (segment + (start 186.7 70.5) + (end 196.65 70.5) + (width 0.25) + (layer "F.Cu") + (net "/KCOIL") + (uuid "f60f9014-f756-42e2-9d23-3b12f10ecaff") + ) + (segment + (start 203.05 58.4) + (end 201.46475 58.4) + (width 0.25) + (layer "F.Cu") + (net "/KCOIL") + (uuid "f65d4445-6bbb-4dab-9e9b-9a4d12b53f63") ) (segment (start 197.78165 61.8231) (end 194.36415 58.4056) (width 0.2) (layer "F.Cu") - (net "KCOIL") + (net "/KCOIL") (uuid "ff18e22f-2c44-43e0-9f8f-cf5dc0789aad") ) - (via - (at 187.98985 62.9464) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "KCOIL") - (uuid "9e096c2b-c938-4db9-833c-66a20eeb41dc") - ) - (segment - (start 194.36415 58.4056) - (end 192.53065 58.4056) - (width 0.2) - (layer "In2.Cu") - (net "KCOIL") - (uuid "7f51c5d2-d2e6-4216-8d96-2a440e6c9d70") - ) - (segment - (start 192.53065 58.4056) - (end 187.98985 62.9464) - (width 0.2) - (layer "In2.Cu") - (net "KCOIL") - (uuid "ff262db9-d5a4-48e9-90c8-a69faa626a07") - ) (segment (start 160.85395 68.2954) (end 164.17585 64.9735) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "594c2b95-adf0-4274-9388-eafb89277aed") ) (segment @@ -38990,7 +43678,7 @@ (end 108.34335 74.1031) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "5e0d180a-c1e8-44bd-934b-235361859a39") ) (segment @@ -38998,7 +43686,7 @@ (end 108.34335 73.8152) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "7216c927-4c56-4643-881a-a666e09d043b") ) (segment @@ -39006,7 +43694,7 @@ (end 160.85395 68.2954) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "79d7de76-12df-4e28-8e2a-2018fe20a850") ) (segment @@ -39014,7 +43702,7 @@ (end 193.42915 48.3231) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "9e121371-3779-493e-949d-0a16e2bd37e8") ) (segment @@ -39022,7 +43710,7 @@ (end 193.42915 48.6791) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "a4222a5d-59e1-4801-a120-fa7909a2036f") ) (segment @@ -39030,7 +43718,7 @@ (end 113.86315 68.2954) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "a6f28279-da0b-4006-8f8b-54492c1d2825") ) (segment @@ -39038,7 +43726,7 @@ (end 191.11085 50.9974) (width 0.2) (layer "F.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "daace834-f9b6-4d7a-871d-dde673b9a520") ) (via @@ -39046,7 +43734,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "5b8a19a2-52cf-4e92-8af8-e8cbf9cd1f6d") ) (via @@ -39054,7 +43742,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "75db7d45-725d-4c90-b42b-adf93cd2e437") ) (segment @@ -39062,7 +43750,7 @@ (end 165.43685 66.2345) (width 0.2) (layer "In2.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "12ee37ad-8faf-46d7-ac97-6dea1cef767f") ) (segment @@ -39070,7 +43758,7 @@ (end 164.17585 64.9735) (width 0.2) (layer "In2.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "80cb1c37-7fa8-49c2-ab11-642b299c62aa") ) (segment @@ -39078,7 +43766,7 @@ (end 174.32565 66.2345) (width 0.2) (layer "In2.Cu") - (net "BATLED1") + (net "/BATLED1") (uuid "98f86658-268d-41e0-84e7-da4ccab1bed9") ) (segment @@ -39086,7 +43774,7 @@ (end 118.98165 94.3331) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "0539515f-381e-4358-860b-47fec9124d6d") ) (segment @@ -39094,7 +43782,7 @@ (end 117.52165 94.3231) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "1536b1a5-79db-4ef7-807f-c19935a434b9") ) (segment @@ -39102,7 +43790,7 @@ (end 116.83105 94.4362) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "241a269d-2cef-4154-be15-89c5c4912416") ) (segment @@ -39110,7 +43798,7 @@ (end 118.99165 94.3231) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "2e6266d8-3f26-4476-a6c2-e3b678c78b7c") ) (segment @@ -39118,7 +43806,7 @@ (end 105.48095 106.3367) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "3e54b5df-1c26-47e8-a9c6-48359a4f127f") ) (segment @@ -39126,7 +43814,7 @@ (end 105.04165 106.776) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "46733990-65be-41f2-9e69-382f653817dc") ) (segment @@ -39134,7 +43822,7 @@ (end 118.85165 94.2031) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "912def29-fd20-4d89-a92b-0ed850975e32") ) (segment @@ -39142,7 +43830,7 @@ (end 119.79165 94.3231) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "a0c6d65d-89e5-43ca-a54d-bc020d195341") ) (segment @@ -39150,7 +43838,7 @@ (end 116.94415 94.3231) (width 0.2) (layer "F.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "e787f4fa-a63a-4437-afd9-75e185e50f42") ) (via @@ -39158,7 +43846,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "0674cb1c-3d61-47d4-8f9d-bea1e7c75eb0") ) (via @@ -39166,7 +43854,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "292eae14-7927-462d-808b-49fcd78fdaef") ) (via @@ -39174,7 +43862,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "7d06a564-d99f-4c9e-b17d-9b11089ebac7") ) (segment @@ -39182,7 +43870,7 @@ (end 105.06965 74.1133) (width 0.2) (layer "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "4ab7e9c9-ee3b-44ff-8de2-c45f9bd85201") ) (segment @@ -39190,7 +43878,7 @@ (end 116.16955 75.2852) (width 0.2) (layer "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "940708a4-e312-48d5-a012-070f23daf5a6") ) (segment @@ -39198,7 +43886,7 @@ (end 106.24155 75.2852) (width 0.2) (layer "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "c84f8bf2-4fb1-4a84-942d-25f57f1481df") ) (segment @@ -39206,7 +43894,7 @@ (end 98.08265 74.1133) (width 0.2) (layer "B.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "d2899a2e-a933-40e0-99f0-e02b54e30e23") ) (segment @@ -39214,7 +43902,7 @@ (end 97.24245 74.9535) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "086bac09-a138-4619-8ebd-24afe3846c80") ) (segment @@ -39222,7 +43910,7 @@ (end 97.24245 96.0558) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "1b3c028c-1abd-4a1a-9b10-e58b5b99b64d") ) (segment @@ -39230,7 +43918,7 @@ (end 113.08505 93.3724) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "1fb3881a-533f-49b6-9d2c-016adf5f06e5") ) (segment @@ -39238,7 +43926,7 @@ (end 105.48095 101.0507) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "2e931d40-331c-48d7-96dc-c544483ccefe") ) (segment @@ -39246,7 +43934,7 @@ (end 105.48095 100.9765) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "554aafb6-8796-42b2-a0f8-b0d48cc70962") ) (segment @@ -39254,7 +43942,7 @@ (end 102.23735 101.0507) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "a9eb7ef5-78de-4858-bde8-4f8a5b649098") ) (segment @@ -39262,7 +43950,7 @@ (end 115.76725 93.3724) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "e100f1fa-c129-4171-9e86-09d58567cb64") ) (segment @@ -39270,7 +43958,7 @@ (end 98.08265 74.1133) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "e5e01b68-4fa9-4c67-9128-e3a4b1407e5d") ) (segment @@ -39278,7 +43966,7 @@ (end 116.83105 94.4362) (width 0.2) (layer "In2.Cu") - (net "CHRG_EN") + (net "/CHRG_EN") (uuid "f46c46c4-96cb-4930-877c-dbbb49740330") ) (segment @@ -39286,7 +43974,7 @@ (end 135.69165 98.0134) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "0b673471-e106-453e-a8dd-9a4fd71353ec") ) (segment @@ -39294,7 +43982,7 @@ (end 121.56305 98.7552) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "18d9cd4e-e5fd-4d34-8b90-3dbf9a2b77d5") ) (segment @@ -39302,7 +43990,7 @@ (end 125.98875 98.7552) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "1f037485-829c-434d-a024-4e93161a252f") ) (segment @@ -39310,7 +43998,7 @@ (end 135.69165 98.0134) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "2768e92f-03b3-45ea-890b-e0b62a3501b1") ) (segment @@ -39318,7 +44006,7 @@ (end 120.74165 97.9338) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "3914014f-dc95-49d4-bc8b-b2b9ee9b1e99") ) (segment @@ -39326,7 +44014,7 @@ (end 135.69165 97.3311) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "3e98bac3-3bc5-4d3e-ae71-030f2b2a8405") ) (segment @@ -39334,7 +44022,7 @@ (end 126.66455 98.0794) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "bdc51ad2-6d85-487c-b258-4acd6f5d7e44") ) (segment @@ -39342,7 +44030,7 @@ (end 140.54295 92.4798) (width 0.2) (layer "F.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "d21f1ecf-b8f8-46b2-a2ff-468c21d8cf88") ) (via @@ -39350,7 +44038,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "35fdbc4c-68e7-42a3-a132-8c6e700dc96a") ) (via @@ -39358,7 +44046,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "9565af16-52c2-4485-b29e-43d6e9b11a67") ) (via @@ -39366,7 +44054,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "e69bb2d6-298c-43af-99f6-51f21a1afd1e") ) (segment @@ -39374,7 +44062,7 @@ (end 126.66455 98.0794) (width 0.2) (layer "B.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "410a8ba8-e774-4173-97a4-493fb8d2ddfc") ) (segment @@ -39382,7 +44070,7 @@ (end 135.16555 98.0794) (width 0.2) (layer "B.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "b677a08b-b7f4-435f-8643-bb8355d7fa5d") ) (segment @@ -39390,7 +44078,7 @@ (end 140.54295 92.4798) (width 0.2) (layer "In2.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "2f4e5ebf-4436-4d94-b04a-abc1f0cc26bb") ) (segment @@ -39398,7 +44086,7 @@ (end 139.53725 81.0487) (width 0.2) (layer "In2.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "a040cd39-efbb-47d9-9646-7b237c9d7dfc") ) (segment @@ -39406,7 +44094,7 @@ (end 139.53725 91.4741) (width 0.2) (layer "In2.Cu") - (net "CHRG_STAT") + (net "/CHRG_STAT") (uuid "d3d258e5-ea61-4a76-bff4-2b3beef6069b") ) (segment @@ -39414,7 +44102,7 @@ (end 127.93445 97.0917) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "11eda846-e065-492a-ab97-5185270052f0") ) (segment @@ -39422,7 +44110,7 @@ (end 144.41095 99.5476) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "1686d535-148a-4e01-983e-f176f9c366aa") ) (segment @@ -39430,7 +44118,7 @@ (end 127.50735 95.2484) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "34ae622f-f086-42a0-af66-c533b1e7805a") ) (segment @@ -39438,7 +44126,7 @@ (end 135.81665 104.3231) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "475a15d6-eae2-465a-ab73-8900a20afb28") ) (segment @@ -39446,7 +44134,7 @@ (end 123.58265 98.3534) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "5f89cb8a-87dc-4fba-8dd7-1805636f97fc") ) (segment @@ -39454,7 +44142,7 @@ (end 127.56015 97.466) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "6aa44f74-84fd-42ca-853d-0d45ade6a5d0") ) (segment @@ -39462,7 +44150,7 @@ (end 127.93445 95.6755) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "79dbda76-1277-439b-ade8-19d8ffc031a7") ) (segment @@ -39470,7 +44158,7 @@ (end 139.63545 104.3231) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "8dc647d7-37d8-4d80-a2bd-3579e60187f7") ) (segment @@ -39478,7 +44166,7 @@ (end 124.47005 97.466) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "9a684560-c5a6-4f98-9bbd-3d9116978859") ) (segment @@ -39486,7 +44174,7 @@ (end 121.24165 97.8657) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "b8c93ec9-74b8-4a20-a8ae-6820091c3525") ) (segment @@ -39494,7 +44182,7 @@ (end 121.72935 98.3534) (width 0.2) (layer "F.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "e280e644-e96f-426d-a5e5-06d7e78cb6b6") ) (via @@ -39502,7 +44190,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "01a046e5-b26f-4840-a638-857bd188ecc5") ) (via @@ -39510,7 +44198,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "78b1f748-4f57-44aa-9513-6afa3fa284e8") ) (segment @@ -39518,7 +44206,7 @@ (end 141.48895 99.1713) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "1ca6ec3d-514d-4e37-b33b-1a8c4929df3c") ) (segment @@ -39526,7 +44214,7 @@ (end 136.92495 94.8928) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "1d59935b-a5dd-460b-b410-f1c93fb66f3b") ) (segment @@ -39534,7 +44222,7 @@ (end 137.21165 94.894) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "1e2f8cc9-b27b-44fe-b6b0-93a237efd102") ) (segment @@ -39542,7 +44230,7 @@ (end 144.41095 96.7771) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "20bf55ae-4f5a-403a-aefe-6f10fed1faa9") ) (segment @@ -39550,7 +44238,7 @@ (end 132.21325 94.894) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "21abb217-869f-497a-8d3c-1cb3e92dbdaf") ) (segment @@ -39558,7 +44246,7 @@ (end 136.42545 94.894) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "44362eb8-2250-46e9-b3ad-cd8b26340c9f") ) (segment @@ -39566,7 +44254,7 @@ (end 142.01675 99.1713) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "4829f7d3-4adf-4a06-b434-45493ff4b4f3") ) (segment @@ -39574,7 +44262,7 @@ (end 127.50735 95.2484) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "69603739-952c-40ae-b345-3f1c3ee67a25") ) (segment @@ -39582,7 +44270,7 @@ (end 127.67345 95.4145) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "9b83774b-f079-46e3-9291-1d779b1621c6") ) (segment @@ -39590,7 +44278,7 @@ (end 131.69275 95.4145) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "a3e5b59c-8f94-46ba-a87a-60a48e3fee30") ) (segment @@ -39598,7 +44286,7 @@ (end 136.42665 94.8928) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "c95d06c3-65b6-45b0-a474-c1a3b8ba5bdc") ) (segment @@ -39606,7 +44294,7 @@ (end 136.92615 94.894) (width 0.2) (layer "B.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "d9bc55db-2a9d-4e35-888a-1be68e7a78c9") ) (segment @@ -39614,7 +44302,7 @@ (end 144.41095 96.5597) (width 0.2) (layer "In2.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "c254f98a-bdbb-43a5-aff7-06dc3a9e3593") ) (segment @@ -39622,7 +44310,7 @@ (end 141.92165 80.8931) (width 0.2) (layer "In2.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "e41bb010-e870-4548-8d6a-01742c8ab19c") ) (segment @@ -39630,7 +44318,7 @@ (end 141.92165 94.0704) (width 0.2) (layer "In2.Cu") - (net "CHRG_FAULT") + (net "/CHRG_FAULT") (uuid "edd91ba5-8d7c-4c23-a099-9fc487e1a232") ) (segment @@ -39638,7 +44326,7 @@ (end 139.35695 72.4178) (width 0.2) (layer "F.Cu") - (net "BYP_CTRL") + (net "/BYP_CTRL") (uuid "731a3f6f-2f19-48bd-8c9f-27235ce0c212") ) (segment @@ -39646,7 +44334,7 @@ (end 137.67165 74.1031) (width 0.2) (layer "F.Cu") - (net "BYP_CTRL") + (net "/BYP_CTRL") (uuid "9ff206eb-c812-4e37-b729-bb6b4c18e4a8") ) (segment @@ -39654,7 +44342,7 @@ (end 179.16435 69.2958) (width 0.2) (layer "F.Cu") - (net "BYP_CTRL") + (net "/BYP_CTRL") (uuid "af5a5405-9b7b-48d9-9509-7216eb386834") ) (segment @@ -39662,7 +44350,7 @@ (end 177.29165 72.4178) (width 0.2) (layer "F.Cu") - (net "BYP_CTRL") + (net "/BYP_CTRL") (uuid "af85bfcc-da55-4738-bf0c-0f4e26b37d6c") ) (segment @@ -39670,7 +44358,7 @@ (end 179.16435 70.5451) (width 0.2) (layer "F.Cu") - (net "BYP_CTRL") + (net "/BYP_CTRL") (uuid "c8b5dd49-5e63-4f4d-9b69-dcb8219ebb25") ) (segment @@ -39734,7 +44422,7 @@ (end 111.54165 102.3231) (width 0.2) (layer "F.Cu") - (net "PROG") + (net "/PROG") (uuid "21c4d1ba-ca01-4de1-ac0d-4d692f158958") ) (segment @@ -39742,7 +44430,7 @@ (end 112.33185 103.1133) (width 0.2) (layer "F.Cu") - (net "PROG") + (net "/PROG") (uuid "8e5106e5-295e-4542-a6a8-7ab26af5471d") ) (segment @@ -39750,7 +44438,7 @@ (end 113.51905 94.4304) (width 0.2) (layer "F.Cu") - (net "PROG") + (net "/PROG") (uuid "c71b01eb-c1e8-4c63-8648-59c56ac80320") ) (segment @@ -39758,7 +44446,7 @@ (end 114.62635 93.3231) (width 0.2) (layer "F.Cu") - (net "PROG") + (net "/PROG") (uuid "d8b48a39-f43e-495f-8843-9d3b74afdc5b") ) (via @@ -39766,7 +44454,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PROG") + (net "/PROG") (uuid "56a448ca-5b1d-487d-98f3-a5a340c3ffb0") ) (via @@ -39774,7 +44462,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "PROG") + (net "/PROG") (uuid "56f4dd55-c161-4178-a166-52a0107b1d52") ) (segment @@ -39782,7 +44470,7 @@ (end 113.90185 103.1133) (width 0.2) (layer "In2.Cu") - (net "PROG") + (net "/PROG") (uuid "29419dea-e966-4b5e-9a58-c90fd12c42ae") ) (segment @@ -39790,7 +44478,7 @@ (end 113.51905 102.7305) (width 0.2) (layer "In2.Cu") - (net "PROG") + (net "/PROG") (uuid "be656144-a141-4018-a551-b0df9b4aed26") ) (segment @@ -39798,7 +44486,7 @@ (end 134.23965 95.5211) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "2ab11e15-5301-4ff0-8028-295d35596ba9") ) (segment @@ -39806,7 +44494,7 @@ (end 134.04165 92.9731) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "3eda1cf7-a1db-47dd-8739-a16785786c6c") ) (segment @@ -39814,7 +44502,7 @@ (end 129.93165 93.3231) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "42355893-2863-42c3-866e-77ebfc660419") ) (segment @@ -39822,7 +44510,7 @@ (end 130.44705 92.8077) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "6c5f5588-d220-4ec1-8c3c-d74952bed722") ) (segment @@ -39830,7 +44518,7 @@ (end 135.69165 91.3231) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "7d46c26a-1d30-44d3-b2d0-29aa6f17f0d5") ) (segment @@ -39838,7 +44526,7 @@ (end 134.23965 97.2004) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "b3be4e06-c438-4605-b018-753baa24a351") ) (segment @@ -39846,7 +44534,7 @@ (end 122.00295 97.7517) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "c9ad61be-2e1d-41ec-b245-60ebf5be19d4") ) (segment @@ -39854,7 +44542,7 @@ (end 121.74165 97.4904) (width 0.2) (layer "F.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "d7b96f9c-7ca5-4425-ae12-b56ade066aa0") ) (via @@ -39862,7 +44550,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "35aee8a5-4654-4c2e-9be3-bf6f9cc4aa13") ) (via @@ -39870,7 +44558,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "677329b8-c903-488d-83da-f04c8a64a65f") ) (via @@ -39878,7 +44566,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "893f9892-9c07-46c1-a6d3-96502722a034") ) (segment @@ -39886,7 +44574,7 @@ (end 133.96635 97.4737) (width 0.2) (layer "B.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "8bc4a9ac-4712-4a80-a1f0-5d07bcdc6219") ) (segment @@ -39894,7 +44582,7 @@ (end 134.23965 97.2004) (width 0.2) (layer "B.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "ac07d732-a6dc-4ae3-8262-6e6ade622348") ) (segment @@ -39902,7 +44590,7 @@ (end 122.28095 97.4737) (width 0.2) (layer "B.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "f99c5f4f-be20-448c-ac62-ee0ed9092f16") ) (segment @@ -39910,7 +44598,7 @@ (end 134.23965 97.2004) (width 0.2) (layer "In2.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "2093fc63-12fe-4f44-93ef-354d7f146d63") ) (segment @@ -39918,55 +44606,63 @@ (end 134.23965 96.6003) (width 0.2) (layer "In2.Cu") - (net "VFB_BST") + (net "/VFB_BST") (uuid "2c6376a0-64bd-45df-9f4b-31290e87ac80") ) + (segment + (start 136.67575 95.32425) + (end 136.67575 95.4945) + (width 0.5) + (layer "F.Cu") + (net "/F2_SEL") + (uuid "42c8a7a8-d82f-48cb-a6ba-382d5635a708") + ) + (segment + (start 140.45 91.55) + (end 136.67575 95.32425) + (width 0.5) + (layer "F.Cu") + (net "/F2_SEL") + (uuid "6d8153b9-b0d0-4275-b32b-e9c5e1141fb0") + ) + (segment + (start 141.39165 90.3231) + (end 141.39165 91.55) + (width 0.5) + (layer "F.Cu") + (net "/F2_SEL") + (uuid "75fec5a1-5579-4754-a634-21188a6f19ff") + ) (segment (start 122.74165 96.7731) (end 122.96635 96.5484) (width 0.2) (layer "F.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "76e52dd5-aef3-46f6-b006-1a301f3e3daa") ) - (segment - (start 140.79545 91.3748) - (end 136.67575 95.4945) - (width 0.2) - (layer "F.Cu") - (net "F2_SEL") - (uuid "826bcaf1-cc0a-4969-88ab-b4d3a66da609") - ) - (segment - (start 141.39165 91.3748) - (end 140.79545 91.3748) - (width 0.2) - (layer "F.Cu") - (net "F2_SEL") - (uuid "87a5e9f0-095f-438f-9223-b1ea6326716e") - ) (segment (start 122.96635 96.5484) (end 123.38255 96.5484) (width 0.2) (layer "F.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "9db7db9e-b68e-45ca-8085-f25a9f77b1c2") ) (segment - (start 141.39165 90.3231) - (end 141.39165 91.3748) - (width 0.2) + (start 141.39165 91.55) + (end 140.45 91.55) + (width 0.5) (layer "F.Cu") - (net "F2_SEL") - (uuid "d02c06aa-6417-47f6-9c67-c0d979537612") + (net "/F2_SEL") + (uuid "b4164241-4333-498a-b725-36edd33d2e6c") ) (via (at 123.38255 96.5484) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "929487b3-6c22-44c3-bc24-4d37a58f38c4") ) (via @@ -39974,7 +44670,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "d1b17195-e15d-4bb1-8424-c4271a44d38f") ) (segment @@ -39982,7 +44678,7 @@ (end 136.32005 95.8502) (width 0.2) (layer "B.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "2eb86933-63c1-4319-80ba-6ac524d45da0") ) (segment @@ -39990,7 +44686,7 @@ (end 126.14385 96.5484) (width 0.2) (layer "B.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "862bc127-48be-4064-a178-68c707fe9cf1") ) (segment @@ -39998,7 +44694,7 @@ (end 126.84205 95.8502) (width 0.2) (layer "B.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "a75c13d1-7865-494f-bacb-69772b749e80") ) (segment @@ -40006,7 +44702,7 @@ (end 136.67575 95.4945) (width 0.2) (layer "B.Cu") - (net "F2_SEL") + (net "/F2_SEL") (uuid "bdc27da6-e862-478a-a4cf-fe003a31ce8b") ) (segment @@ -40014,7 +44710,7 @@ (end 124.72215 96.8536) (width 0.2) (layer "F.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "603cbdec-0aab-42c7-942d-98b191ec61f6") ) (segment @@ -40022,7 +44718,7 @@ (end 127.32135 96.8536) (width 0.2) (layer "F.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "65ee344a-e792-493a-a1b6-44a3d4c2db94") ) (segment @@ -40030,7 +44726,7 @@ (end 141.39165 95.2759) (width 0.2) (layer "F.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "a84d6269-1b64-4f80-bdf2-57b2c99814c3") ) (segment @@ -40038,7 +44734,7 @@ (end 141.39165 94.8231) (width 0.2) (layer "F.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "df5d14b5-bfa2-422d-a4e0-64ad02b10459") ) (segment @@ -40046,7 +44742,7 @@ (end 139.20135 97.4662) (width 0.2) (layer "F.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "e0d3e324-6f71-4d36-9198-b5f2f4054063") ) (via @@ -40054,7 +44750,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "dad81879-30c3-4246-a978-83c1c6f58abc") ) (via @@ -40062,7 +44758,7 @@ (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "f4b39cdc-6ec1-49c2-884a-8aafaedd84f8") ) (segment @@ -40070,7 +44766,7 @@ (end 127.62505 96.5499) (width 0.2) (layer "B.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "857ca6f5-eed8-47e2-95e1-936f9b5e95b0") ) (segment @@ -40078,7 +44774,7 @@ (end 137.21925 96.5499) (width 0.2) (layer "B.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "a852b0af-11e8-45c3-9afb-e46fb7c77e42") ) (segment @@ -40086,7 +44782,7 @@ (end 138.13555 97.4662) (width 0.2) (layer "B.Cu") - (net "F1_SEL") + (net "/F1_SEL") (uuid "b74697cf-4af5-4b93-a925-0ca2442ce4c8") ) (segment @@ -40094,7 +44790,7 @@ (end 127.20825 87.3231) (width 0.2) (layer "F.Cu") - (net "PFO_TP") + (net "/PFO_TP") (uuid "7aae81c7-4d2f-4c22-bec3-ac35af070337") ) (segment @@ -40102,7 +44798,7 @@ (end 122.74165 91.8731) (width 0.2) (layer "F.Cu") - (net "PFO_TP") + (net "/PFO_TP") (uuid "cd915151-d176-48e4-b7c0-b94398bbb9dc") ) (segment @@ -40110,7 +44806,7 @@ (end 122.74165 91.7897) (width 0.2) (layer "F.Cu") - (net "PFO_TP") + (net "/PFO_TP") (uuid "f5131b29-b096-4ec7-b8b0-f066533e5b1d") ) (zone @@ -40143,444 +44839,421 @@ (filled_polygon (layer "F.Cu") (pts - (xy 128.654293 117.889907) (xy 128.690257 117.939407) (xy 128.690257 118.000593) (xy 128.687566 118.007885) - (xy 128.656771 118.082231) (xy 128.65677 118.082231) (xy 128.648099 118.1481) (xy 128.876928 118.1481) - (xy 128.88074 118.149338) (xy 128.884637 118.148401) (xy 128.900873 118.15588) (xy 128.935119 118.167007) - (xy 128.941179 118.171782) (xy 128.944166 118.17433) (xy 128.998247 118.228411) (xy 129.021378 118.240197) - (xy 129.03027 118.247782) (xy 129.040457 118.264383) (xy 129.054229 118.278156) (xy 129.05608 118.289844) - (xy 129.06227 118.299932) (xy 129.060753 118.31935) (xy 129.0638 118.338588) (xy 129.058426 118.349133) - (xy 129.057505 118.360932) (xy 129.044864 118.375749) (xy 129.036022 118.393104) (xy 129.020342 118.404495) - (xy 129.017796 118.407481) (xy 129.015459 118.408043) (xy 129.010965 118.411309) (xy 128.998247 118.417789) - (xy 128.998245 118.41779) (xy 128.946931 118.469104) (xy 128.892414 118.496881) (xy 128.876928 118.4981) - (xy 128.6481 118.4981) (xy 128.656771 118.563967) (xy 128.715967 118.706882) (xy 128.715969 118.706886) - (xy 128.760894 118.765433) (xy 128.781318 118.823108) (xy 128.763941 118.881774) (xy 128.715399 118.919021) - (xy 128.682352 118.9247) (xy 126.252351 118.9247) (xy 126.19416 118.905793) (xy 126.182347 118.895704) - (xy 125.941588 118.654945) (xy 125.689263 118.40262) (xy 125.68926 118.402618) (xy 125.649166 118.379469) - (xy 125.608225 118.333999) (xy 125.601831 118.273148) (xy 125.605909 118.259136) (xy 125.635246 118.180478) - (xy 125.635248 118.18047) (xy 125.64165 118.120924) (xy 125.64165 118.073101) (xy 125.641649 118.0731) - (xy 124.99065 118.0731) (xy 124.975738 118.068255) (xy 124.960057 118.068255) (xy 124.947371 118.059038) - (xy 124.932459 118.054193) (xy 124.923242 118.041507) (xy 124.910557 118.032291) (xy 124.905711 118.017378) - (xy 124.896495 118.004693) (xy 124.89165 117.9741) (xy 124.89165 117.97) (xy 124.910557 117.911809) - (xy 124.960057 117.875845) (xy 124.99065 117.871) (xy 125.688923 117.871) (xy 125.794377 117.871) - (xy 128.596102 117.871) + (xy 125.006734 117.739907) (xy 125.018547 117.749996) (xy 125.041651 117.7731) (xy 125.641649 117.7731) + (xy 125.664753 117.749996) (xy 125.71927 117.722219) (xy 125.734757 117.721) (xy 125.791478 117.721) + (xy 128.682736 117.721) (xy 128.740927 117.739907) (xy 128.776891 117.789407) (xy 128.776891 117.850593) + (xy 128.761278 117.880268) (xy 128.715967 117.939317) (xy 128.656771 118.082231) (xy 128.65677 118.082231) + (xy 128.648099 118.1481) (xy 129.195767 118.1481) (xy 129.199292 118.149245) (xy 129.200845 118.149077) + (xy 129.200845 118.1486) (xy 129.205247 118.1486) (xy 129.205468 118.148576) (xy 129.205704 118.148599) + (xy 129.205708 118.1486) (xy 129.205712 118.1486) (xy 129.38015 118.1486) (xy 129.438341 118.167507) + (xy 129.474305 118.217007) (xy 129.47915 118.2476) (xy 129.47915 118.3986) (xy 129.460243 118.456791) + (xy 129.410743 118.492755) (xy 129.38015 118.4976) (xy 129.205708 118.4976) (xy 129.205704 118.4976) + (xy 129.205468 118.497624) (xy 129.195767 118.4981) (xy 128.6481 118.4981) (xy 128.656771 118.563967) + (xy 128.715967 118.706882) (xy 128.810138 118.829607) (xy 128.810142 118.829611) (xy 128.89817 118.897158) + (xy 128.932825 118.947583) (xy 128.931223 119.008747) (xy 128.893976 119.057289) (xy 128.837902 119.0747) + (xy 126.190219 119.0747) (xy 126.132028 119.055793) (xy 126.120215 119.045704) (xy 125.877706 118.803195) + (xy 125.585247 118.510736) (xy 125.585245 118.510735) (xy 125.585242 118.510732) (xy 125.577138 118.505317) + (xy 125.578867 118.502729) (xy 125.544535 118.473403) (xy 125.530256 118.413907) (xy 125.549697 118.362351) + (xy 125.585004 118.315187) (xy 125.635246 118.180481) (xy 125.635248 118.18047) (xy 125.64165 118.120924) + (xy 125.64165 118.073101) (xy 125.641649 118.0731) (xy 124.99065 118.0731) (xy 124.932459 118.054193) + (xy 124.896495 118.004693) (xy 124.89165 117.9741) (xy 124.89165 117.923101) (xy 124.891649 117.9231) + (xy 124.84065 117.9231) (xy 124.825738 117.918255) (xy 124.810057 117.918255) (xy 124.797371 117.909038) + (xy 124.782459 117.904193) (xy 124.773242 117.891507) (xy 124.760557 117.882291) (xy 124.755711 117.867378) + (xy 124.746495 117.854693) (xy 124.74165 117.8241) (xy 124.74165 117.82) (xy 124.760557 117.761809) + (xy 124.810057 117.725845) (xy 124.84065 117.721) (xy 124.948543 117.721) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 131.510851 111.487451) (xy 131.535157 111.492135) (xy 131.539476 111.496752) (xy 131.545493 111.498707) - (xy 131.560048 111.51874) (xy 131.576958 111.536815) (xy 131.580666 111.544733) (xy 131.582073 111.549984) - (xy 131.587641 111.559629) (xy 131.589443 111.563476) (xy 131.592723 111.589835) (xy 131.598244 111.615813) - (xy 131.596455 111.619828) (xy 131.596999 111.624193) (xy 131.584158 111.647445) (xy 131.573356 111.671707) - (xy 131.569547 111.673905) (xy 131.567422 111.677755) (xy 131.55961 111.684342) (xy 131.541576 111.698018) - (xy 131.541572 111.698022) (xy 131.454284 111.813127) (xy 131.401291 111.947508) (xy 131.39115 112.031951) - (xy 131.39115 112.614248) (xy 131.401291 112.698691) (xy 131.454284 112.833072) (xy 131.454285 112.833074) - (xy 131.454286 112.833075) (xy 131.541572 112.948178) (xy 131.656675 113.035464) (xy 131.678468 113.044057) - (xy 131.725665 113.082993) (xy 131.74115 113.136155) (xy 131.74115 117.267099) (xy 131.738681 117.274696) - (xy 131.739931 117.282586) (xy 131.729406 117.303241) (xy 131.722243 117.32529) (xy 131.712154 117.337102) - (xy 131.578262 117.470993) (xy 131.523747 117.49877) (xy 131.463315 117.489199) (xy 131.438259 117.470995) - (xy 131.385053 117.417789) (xy 131.38505 117.417787) (xy 131.385051 117.417787) (xy 131.358704 117.404363) - (xy 131.31544 117.361098) (xy 131.30465 117.316154) (xy 131.30465 113.432875) (xy 131.304649 113.432871) - (xy 131.303359 113.428057) (xy 131.295153 113.397428) (xy 131.277357 113.331012) (xy 131.277355 113.331009) - (xy 131.277355 113.331007) (xy 131.224633 113.239691) (xy 131.224632 113.23969) (xy 131.224631 113.239689) - (xy 131.22463 113.239687) (xy 130.471145 112.486202) (xy 130.443368 112.431685) (xy 130.442149 112.416198) - (xy 130.442149 112.000227) (xy 130.442148 112.000218) (xy 130.437524 111.957206) (xy 130.435741 111.940617) - (xy 130.431557 111.9294) (xy 130.385447 111.80577) (xy 130.299199 111.690558) (xy 130.299198 111.690557) - (xy 130.299196 111.690554) (xy 130.296456 111.688503) (xy 130.27402 111.671707) (xy 130.255779 111.658052) - (xy 130.220527 111.608045) (xy 130.221401 111.546866) (xy 130.258068 111.497884) (xy 130.315109 111.4798) - (xy 131.487302 111.4798) + (xy 131.604971 111.330635) (xy 131.607582 111.329936) (xy 131.633835 111.340013) (xy 131.660592 111.348707) + (xy 131.66218 111.350893) (xy 131.664703 111.351862) (xy 131.680017 111.375443) (xy 131.696556 111.398207) + (xy 131.698025 111.403168) (xy 131.703032 111.421854) (xy 131.721852 111.49209) (xy 131.784405 111.600433) + (xy 131.781983 111.601831) (xy 131.798507 111.648448) (xy 131.781148 111.707119) (xy 131.743024 111.74001) + (xy 131.695441 111.763272) (xy 131.606823 111.85189) (xy 131.551784 111.964473) (xy 131.548375 111.987872) + (xy 131.54115 112.037464) (xy 131.54115 112.608736) (xy 131.546047 112.642346) (xy 131.551784 112.681726) + (xy 131.590302 112.760515) (xy 131.606824 112.794311) (xy 131.695439 112.882926) (xy 131.808025 112.937966) + (xy 131.808029 112.937966) (xy 131.815367 112.940234) (xy 131.814853 112.941896) (xy 131.861279 112.964831) + (xy 131.889731 113.018999) (xy 131.89115 113.035698) (xy 131.89115 117.329231) (xy 131.872243 117.387422) + (xy 131.862154 117.399235) (xy 131.658103 117.603286) (xy 131.658102 117.603285) (xy 131.587634 117.673754) + (xy 131.5753 117.703531) (xy 131.535563 117.750056) (xy 131.476068 117.764339) (xy 131.41954 117.740923) + (xy 131.387572 117.688754) (xy 131.386746 117.684991) (xy 131.378341 117.642737) (xy 131.364886 117.6226) + (xy 131.32574 117.564012) (xy 131.325737 117.564009) (xy 131.247015 117.51141) (xy 131.247014 117.511409) + (xy 131.247013 117.511409) (xy 131.240152 117.510044) (xy 131.234331 117.508886) (xy 131.180949 117.478987) + (xy 131.155336 117.42342) (xy 131.15465 117.411789) (xy 131.15465 113.435771) (xy 131.116514 113.343703) + (xy 131.046047 113.273235) (xy 131.046047 113.273236) (xy 130.321146 112.548335) (xy 130.293369 112.493818) + (xy 130.29215 112.478331) (xy 130.29215 112.014843) (xy 130.29215 112.01484) (xy 130.282223 111.946707) + (xy 130.282221 111.946703) (xy 130.255422 111.891884) (xy 130.230848 111.841617) (xy 130.148133 111.758902) + (xy 130.128492 111.7493) (xy 130.043045 111.707527) (xy 130.008053 111.702429) (xy 129.97491 111.6976) + (xy 129.511419 111.6976) (xy 129.453228 111.678693) (xy 129.441415 111.668604) (xy 129.271615 111.498804) + (xy 129.243838 111.444287) (xy 129.253409 111.383855) (xy 129.296674 111.34059) (xy 129.341619 111.3298) + (xy 131.602401 111.3298) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 116.332314 105.735602) (xy 116.380877 105.772822) (xy 116.395472 105.812739) (xy 116.396701 105.812495) - (xy 116.438019 106.020218) (xy 116.517208 106.211397) (xy 116.623722 106.370807) (xy 116.632173 106.383455) - (xy 116.778495 106.529777) (xy 116.778497 106.529778) (xy 117.466614 107.217896) (xy 117.494391 107.272412) - (xy 117.48482 107.332844) (xy 117.466614 107.357903) (xy 116.015677 108.808841) (xy 116.015674 108.808845) - (xy 115.900708 108.980902) (xy 115.821519 109.172081) (xy 115.78115 109.375032) (xy 115.78115 109.581967) - (xy 115.821519 109.784918) (xy 115.900708 109.976097) (xy 115.913128 109.994684) (xy 116.015674 110.148155) - (xy 116.161995 110.294476) (xy 116.334052 110.409441) (xy 116.52523 110.48863) (xy 116.728185 110.529) - (xy 116.728186 110.529) (xy 116.935114 110.529) (xy 116.935115 110.529) (xy 117.13807 110.48863) - (xy 117.329248 110.409441) (xy 117.501305 110.294476) (xy 119.299985 108.495796) (xy 119.354502 108.468019) - (xy 119.369989 108.4668) (xy 121.192549 108.4668) (xy 121.25074 108.485707) (xy 121.286704 108.535207) - (xy 121.286704 108.596393) (xy 121.262553 108.635804) (xy 118.379753 111.518604) (xy 118.325236 111.546381) - (xy 118.309749 111.5476) (xy 117.875501 111.5476) (xy 117.791058 111.557741) (xy 117.656677 111.610734) - (xy 117.573375 111.673905) (xy 117.541572 111.698022) (xy 117.455566 111.811438) (xy 117.454284 111.813128) - (xy 117.435832 111.859919) (xy 117.396895 111.907116) (xy 117.343735 111.9226) (xy 116.497758 111.9226) - (xy 116.439567 111.903693) (xy 116.405 111.858198) (xy 116.385446 111.805769) (xy 116.384266 111.804193) - (xy 116.299199 111.690558) (xy 116.299198 111.690557) (xy 116.299196 111.690554) (xy 116.299191 111.69055) - (xy 116.183979 111.604302) (xy 116.049138 111.55401) (xy 116.049133 111.554009) (xy 116.049131 111.554008) - (xy 116.049127 111.554008) (xy 116.017899 111.55065) (xy 115.989523 111.5476) (xy 115.98952 111.5476) - (xy 115.493783 111.5476) (xy 115.493779 111.5476) (xy 115.493778 111.547601) (xy 115.486848 111.548346) - (xy 115.434169 111.554008) (xy 115.434164 111.554009) (xy 115.29932 111.604302) (xy 115.184108 111.69055) - (xy 115.1841 111.690558) (xy 115.097852 111.80577) (xy 115.04756 111.940611) (xy 115.047558 111.940622) - (xy 115.041151 112.000218) (xy 115.04115 112.000227) (xy 115.04115 112.467199) (xy 115.033986 112.489246) - (xy 115.03036 112.512144) (xy 115.024711 112.517792) (xy 115.022243 112.52539) (xy 115.003486 112.539017) - (xy 114.987095 112.555409) (xy 114.979205 112.556658) (xy 114.972743 112.561354) (xy 114.949558 112.561354) - (xy 114.926663 112.56498) (xy 114.919546 112.561354) (xy 114.911557 112.561354) (xy 114.872146 112.537203) - (xy 114.821145 112.486202) (xy 114.793368 112.431685) (xy 114.792149 112.416198) (xy 114.792149 112.000227) - (xy 114.792148 112.000218) (xy 114.787524 111.957206) (xy 114.785741 111.940617) (xy 114.781557 111.9294) - (xy 114.735447 111.80577) (xy 114.649199 111.690558) (xy 114.649198 111.690557) (xy 114.649196 111.690554) - (xy 114.649191 111.69055) (xy 114.533979 111.604302) (xy 114.399138 111.55401) (xy 114.399133 111.554009) - (xy 114.399131 111.554008) (xy 114.399127 111.554008) (xy 114.367899 111.55065) (xy 114.339523 111.5476) - (xy 114.33952 111.5476) (xy 113.843783 111.5476) (xy 113.843779 111.5476) (xy 113.843778 111.547601) - (xy 113.836848 111.548346) (xy 113.784169 111.554008) (xy 113.784164 111.554009) (xy 113.64932 111.604302) - (xy 113.534108 111.69055) (xy 113.5341 111.690558) (xy 113.447854 111.805767) (xy 113.439209 111.828945) - (xy 113.428299 111.858198) (xy 113.39025 111.906111) (xy 113.335542 111.9226) (xy 112.497758 111.9226) - (xy 112.439567 111.903693) (xy 112.405 111.858198) (xy 112.385446 111.805769) (xy 112.384266 111.804193) - (xy 112.299199 111.690558) (xy 112.299198 111.690557) (xy 112.299196 111.690554) (xy 112.299191 111.69055) - (xy 112.183979 111.604302) (xy 112.049138 111.55401) (xy 112.049133 111.554009) (xy 112.049131 111.554008) - (xy 112.049127 111.554008) (xy 112.017899 111.55065) (xy 111.989523 111.5476) (xy 111.98952 111.5476) - (xy 111.493783 111.5476) (xy 111.493773 111.547601) (xy 111.486841 111.548346) (xy 111.426964 111.53576) - (xy 111.38592 111.490384) (xy 111.378116 111.46283) (xy 111.37775 111.460055) (xy 111.37775 111.460043) - (xy 111.336827 111.307316) (xy 111.25777 111.170384) (xy 111.145966 111.05858) (xy 111.009034 110.979523) - (xy 110.856307 110.9386) (xy 110.698193 110.9386) (xy 110.545466 110.979523) (xy 110.408534 111.05858) - (xy 110.29673 111.170384) (xy 110.217673 111.307316) (xy 110.176748 111.46005) (xy 110.176554 111.461527) - (xy 110.176095 111.462488) (xy 110.175071 111.466311) (xy 110.174362 111.466121) (xy 110.150211 111.51675) - (xy 110.096439 111.545943) (xy 110.078402 111.5476) (xy 109.843783 111.5476) (xy 109.843779 111.5476) - (xy 109.843778 111.547601) (xy 109.836848 111.548346) (xy 109.784169 111.554008) (xy 109.784164 111.554009) - (xy 109.64932 111.604302) (xy 109.534108 111.69055) (xy 109.5341 111.690558) (xy 109.447852 111.80577) - (xy 109.39756 111.940611) (xy 109.397558 111.940622) (xy 109.391151 112.000218) (xy 109.39115 112.000227) - (xy 109.39115 112.645966) (xy 109.39115 112.645969) (xy 109.391151 112.645972) (xy 109.392521 112.658716) - (xy 109.397558 112.70558) (xy 109.397559 112.705585) (xy 109.447852 112.840429) (xy 109.528513 112.948178) - (xy 109.534104 112.955646) (xy 109.534107 112.955648) (xy 109.534108 112.955649) (xy 109.64932 113.041897) - (xy 109.784161 113.092189) (xy 109.784162 113.092189) (xy 109.784167 113.092191) (xy 109.843777 113.0986) - (xy 110.17375 113.098599) (xy 110.231939 113.117506) (xy 110.267904 113.167006) (xy 110.267904 113.228191) - (xy 110.243753 113.267603) (xy 106.613453 116.897904) (xy 106.558936 116.925681) (xy 106.543449 116.9269) - (xy 102.015972 116.9269) (xy 101.957781 116.907993) (xy 101.921817 116.858493) (xy 101.917522 116.824919) - (xy 101.91715 116.824919) (xy 101.91715 116.822014) (xy 101.917148 116.821999) (xy 101.91715 116.821965) - (xy 101.91715 115.824241) (xy 101.917149 115.824235) (xy 101.909989 115.764612) (xy 101.906647 115.736779) - (xy 101.891363 115.698022) (xy 101.851762 115.597601) (xy 101.778147 115.500525) (xy 101.761361 115.478389) - (xy 101.670108 115.40919) (xy 101.635167 115.358965) (xy 101.634301 115.304686) (xy 101.67075 115.168657) - (xy 101.67075 115.010543) (xy 101.629827 114.857816) (xy 101.55077 114.720884) (xy 101.438966 114.60908) - (xy 101.302034 114.530023) (xy 101.149307 114.4891) (xy 100.991193 114.4891) (xy 100.838466 114.530023) - (xy 100.701534 114.60908) (xy 100.58973 114.720884) (xy 100.510673 114.857816) (xy 100.46975 115.010543) - (xy 100.46975 115.168657) (xy 100.484643 115.224237) (xy 100.510673 115.321384) (xy 100.525876 115.347717) - (xy 100.538595 115.407565) (xy 100.513708 115.463461) (xy 100.499962 115.476096) (xy 100.496939 115.478388) - (xy 100.406538 115.597601) (xy 100.406537 115.597601) (xy 100.351653 115.736777) (xy 100.34115 115.824235) - (xy 100.34115 116.604699) (xy 100.333986 116.626746) (xy 100.33036 116.649644) (xy 100.324711 116.655292) - (xy 100.322243 116.66289) (xy 100.303486 116.676517) (xy 100.287095 116.692909) (xy 100.279205 116.694158) - (xy 100.272743 116.698854) (xy 100.249558 116.698854) (xy 100.226663 116.70248) (xy 100.219546 116.698854) - (xy 100.211557 116.698854) (xy 100.172146 116.674703) (xy 100.071146 116.573703) (xy 100.043369 116.519186) - (xy 100.04215 116.503699) (xy 100.04215 115.824241) (xy 100.042149 115.824235) (xy 100.034989 115.764612) - (xy 100.031647 115.736779) (xy 100.016363 115.698022) (xy 99.976762 115.597601) (xy 99.903147 115.500525) - (xy 99.886361 115.478389) (xy 99.76715 115.387989) (xy 99.767148 115.387988) (xy 99.767148 115.387987) - (xy 99.627972 115.333103) (xy 99.540514 115.3226) (xy 99.54051 115.3226) (xy 98.96779 115.3226) - (xy 98.967785 115.3226) (xy 98.880327 115.333103) (xy 98.741151 115.387987) (xy 98.741151 115.387988) - (xy 98.621942 115.478386) (xy 98.621936 115.478392) (xy 98.531538 115.597601) (xy 98.531537 115.597601) - (xy 98.476653 115.736777) (xy 98.46615 115.824235) (xy 98.46615 116.503699) (xy 98.447243 116.56189) - (xy 98.437154 116.573703) (xy 98.279553 116.731304) (xy 98.272435 116.73493) (xy 98.26774 116.741393) - (xy 98.245691 116.748556) (xy 98.225036 116.759081) (xy 98.209549 116.7603) (xy 98.012091 116.7603) - (xy 97.9539 116.741393) (xy 97.917936 116.691893) (xy 97.913604 116.651238) (xy 97.91665 116.621423) - (xy 97.91665 116.573101) (xy 97.916649 116.5731) (xy 97.06565 116.5731) (xy 97.007459 116.554193) - (xy 96.971495 116.504693) (xy 96.96665 116.4741) (xy 96.96665 116.1721) (xy 96.985557 116.113909) - (xy 97.035057 116.077945) (xy 97.06565 116.0731) (xy 97.916648 116.0731) (xy 97.916649 116.073099) - (xy 97.916649 116.024777) (xy 97.906507 115.925502) (xy 97.906504 115.92549) (xy 97.853195 115.764612) - (xy 97.764224 115.62037) (xy 97.644379 115.500525) (xy 97.500137 115.411554) (xy 97.339253 115.358243) - (xy 97.239973 115.3481) (xy 97.19705 115.3481) (xy 97.138859 115.329193) (xy 97.102895 115.279693) - (xy 97.102895 115.218507) (xy 97.127044 115.179098) (xy 98.461647 113.844496) (xy 98.516164 113.816719) - (xy 98.531651 113.8155) (xy 102.702475 113.8155) (xy 102.702477 113.8155) (xy 102.804338 113.788207) - (xy 102.80434 113.788205) (xy 102.804342 113.788205) (xy 102.895658 113.735483) (xy 102.895658 113.735482) - (xy 102.895663 113.73548) (xy 103.503545 113.127595) (xy 103.558062 113.099818) (xy 103.573549 113.098599) - (xy 103.989517 113.098599) (xy 103.989522 113.098599) (xy 104.049133 113.092191) (xy 104.142153 113.057497) - (xy 104.183979 113.041897) (xy 104.183979 113.041896) (xy 104.183981 113.041896) (xy 104.299196 112.955646) - (xy 104.385446 112.840431) (xy 104.405 112.788001) (xy 104.44305 112.740089) (xy 104.497758 112.7236) - (xy 105.335542 112.7236) (xy 105.393733 112.742507) (xy 105.428299 112.788001) (xy 105.440314 112.820214) - (xy 105.447854 112.840432) (xy 105.528513 112.948178) (xy 105.534104 112.955646) (xy 105.534107 112.955648) - (xy 105.534108 112.955649) (xy 105.64932 113.041897) (xy 105.784161 113.092189) (xy 105.784162 113.092189) - (xy 105.784167 113.092191) (xy 105.843777 113.0986) (xy 106.339522 113.098599) (xy 106.399133 113.092191) - (xy 106.492153 113.057497) (xy 106.533979 113.041897) (xy 106.533979 113.041896) (xy 106.533981 113.041896) - (xy 106.649196 112.955646) (xy 106.72419 112.855466) (xy 106.774197 112.820214) (xy 106.835376 112.821088) - (xy 106.884357 112.857755) (xy 106.897957 112.885336) (xy 106.898628 112.88749) (xy 106.898632 112.887499) - (xy 106.986574 113.032972) (xy 107.106777 113.153175) (xy 107.252249 113.241117) (xy 107.252257 113.24112) - (xy 107.414539 113.291689) (xy 107.414545 113.291691) (xy 107.485075 113.298098) (xy 107.49165 113.298098) - (xy 107.49165 112.573101) (xy 107.99165 112.573101) (xy 107.99165 113.298098) (xy 107.991651 113.298099) - (xy 107.998216 113.298099) (xy 107.998232 113.298098) (xy 108.068753 113.291691) (xy 108.068759 113.291689) - (xy 108.231042 113.24112) (xy 108.23105 113.241117) (xy 108.376522 113.153175) (xy 108.496725 113.032972) - (xy 108.584668 112.887499) (xy 108.58467 112.887492) (xy 108.635239 112.72521) (xy 108.635241 112.725204) - (xy 108.641649 112.654681) (xy 108.64165 112.654668) (xy 108.64165 112.573101) (xy 108.641649 112.5731) - (xy 107.991651 112.5731) (xy 107.99165 112.573101) (xy 107.49165 112.573101) (xy 107.49165 111.374869) - (xy 107.422668 111.348101) (xy 107.99165 111.348101) (xy 107.99165 112.073099) (xy 107.991651 112.0731) - (xy 108.641648 112.0731) (xy 108.641649 112.073099) (xy 108.641649 111.991533) (xy 108.641648 111.991517) - (xy 108.635241 111.920996) (xy 108.635239 111.92099) (xy 108.584668 111.758701) (xy 108.584667 111.758699) - (xy 108.496725 111.613227) (xy 108.376522 111.493024) (xy 108.23105 111.405082) (xy 108.231042 111.405079) - (xy 108.06876 111.35451) (xy 108.068754 111.354508) (xy 107.998231 111.3481) (xy 107.991651 111.3481) - (xy 107.99165 111.348101) (xy 107.422668 111.348101) (xy 107.41286 111.344295) (xy 107.406265 111.338915) - (xy 107.39797 111.337029) (xy 107.373361 111.31207) (xy 107.365451 111.305617) (xy 107.364885 111.303473) - (xy 107.362939 111.3015) (xy 107.31247 111.214084) (xy 107.200666 111.10228) (xy 107.063734 111.023223) - (xy 106.911007 110.9823) (xy 106.752893 110.9823) (xy 106.600166 111.023223) (xy 106.463234 111.10228) - (xy 106.35143 111.214084) (xy 106.272373 111.351016) (xy 106.243158 111.46005) (xy 106.23936 111.474223) - (xy 106.206036 111.525538) (xy 106.148914 111.547464) (xy 106.143733 111.5476) (xy 105.843783 111.5476) - (xy 105.843779 111.5476) (xy 105.843778 111.547601) (xy 105.836848 111.548346) (xy 105.784169 111.554008) - (xy 105.784164 111.554009) (xy 105.64932 111.604302) (xy 105.534108 111.69055) (xy 105.5341 111.690558) - (xy 105.447854 111.805767) (xy 105.439209 111.828945) (xy 105.428299 111.858198) (xy 105.39025 111.906111) - (xy 105.335542 111.9226) (xy 104.497758 111.9226) (xy 104.439567 111.903693) (xy 104.405 111.858198) - (xy 104.385446 111.805769) (xy 104.384266 111.804193) (xy 104.299199 111.690558) (xy 104.299198 111.690557) - (xy 104.299196 111.690554) (xy 104.299191 111.69055) (xy 104.183979 111.604302) (xy 104.049138 111.55401) - (xy 104.049133 111.554009) (xy 104.049131 111.554008) (xy 104.049127 111.554008) (xy 104.017899 111.55065) - (xy 103.989523 111.5476) (xy 103.98952 111.5476) (xy 103.493783 111.5476) (xy 103.493779 111.5476) - (xy 103.493778 111.547601) (xy 103.486848 111.548346) (xy 103.434169 111.554008) (xy 103.434164 111.554009) - (xy 103.299318 111.604303) (xy 103.293106 111.607696) (xy 103.292301 111.606223) (xy 103.242558 111.623172) - (xy 103.184104 111.605094) (xy 103.14744 111.556111) (xy 103.14215 111.524182) (xy 103.14215 109.225656) - (xy 103.149686 109.18777) (xy 103.156185 109.17208) (xy 103.20078 109.06442) (xy 103.24115 108.861465) - (xy 103.24115 108.654535) (xy 103.20078 108.45158) (xy 103.121591 108.260402) (xy 103.076701 108.19322) - (xy 103.060093 108.134334) (xy 103.08127 108.07693) (xy 103.124421 108.045461) (xy 103.133981 108.041896) - (xy 103.249196 107.955646) (xy 103.335446 107.840431) (xy 103.342661 107.821088) (xy 103.385739 107.705588) - (xy 103.38574 107.705585) (xy 103.385741 107.705583) (xy 103.39215 107.645973) (xy 103.392149 107.229999) - (xy 103.411056 107.171809) (xy 103.421139 107.160002) (xy 104.755847 105.825296) (xy 104.762964 105.821669) - (xy 104.76766 105.815207) (xy 104.789708 105.808043) (xy 104.810364 105.797519) (xy 104.825851 105.7963) - (xy 104.933107 105.7963) (xy 104.991298 105.815207) (xy 105.027262 105.864707) (xy 105.027262 105.925893) - (xy 105.003112 105.965301) (xy 105.00043 105.967984) (xy 104.921373 106.104916) (xy 104.899652 106.185982) - (xy 104.88045 106.257644) (xy 104.88045 106.329799) (xy 104.861543 106.38799) (xy 104.851454 106.399802) - (xy 104.721171 106.530085) (xy 104.721169 106.530088) (xy 104.717794 106.535934) (xy 104.672322 106.576872) - (xy 104.666659 106.579186) (xy 104.599317 106.604304) (xy 104.599316 106.604304) (xy 104.484108 106.69055) - (xy 104.4841 106.690558) (xy 104.397852 106.80577) (xy 104.34756 106.940611) (xy 104.347559 106.940621) - (xy 104.342087 106.991517) (xy 104.34115 107.000229) (xy 104.34115 107.645966) (xy 104.341151 107.64597) - (xy 104.347558 107.70558) (xy 104.347559 107.705585) (xy 104.397852 107.840429) (xy 104.479341 107.949284) - (xy 104.484104 107.955646) (xy 104.484107 107.955648) (xy 104.484108 107.955649) (xy 104.59932 108.041897) - (xy 104.734161 108.092189) (xy 104.734162 108.092189) (xy 104.734167 108.092191) (xy 104.793777 108.0986) - (xy 105.289522 108.098599) (xy 105.349133 108.092191) (xy 105.474423 108.045461) (xy 105.483979 108.041897) - (xy 105.483979 108.041896) (xy 105.483981 108.041896) (xy 105.599196 107.955646) (xy 105.67419 107.855466) - (xy 105.724197 107.820214) (xy 105.785376 107.821088) (xy 105.834357 107.857755) (xy 105.847957 107.885336) - (xy 105.848628 107.88749) (xy 105.848632 107.8875) (xy 105.936574 108.032972) (xy 106.056777 108.153175) - (xy 106.202249 108.241117) (xy 106.202257 108.24112) (xy 106.364539 108.291689) (xy 106.364545 108.291691) - (xy 106.435075 108.298098) (xy 106.44165 108.298098) (xy 106.44165 107.573101) (xy 106.94165 107.573101) - (xy 106.94165 108.298098) (xy 106.941651 108.298099) (xy 106.948216 108.298099) (xy 106.948232 108.298098) - (xy 107.018753 108.291691) (xy 107.018759 108.291689) (xy 107.181042 108.24112) (xy 107.18105 108.241117) - (xy 107.326522 108.153175) (xy 107.446725 108.032972) (xy 107.534667 107.8875) (xy 107.53467 107.887492) - (xy 107.585239 107.72521) (xy 107.585241 107.725204) (xy 107.591649 107.654681) (xy 107.59165 107.654668) - (xy 107.59165 107.573101) (xy 107.591649 107.5731) (xy 106.941651 107.5731) (xy 106.94165 107.573101) - (xy 106.44165 107.573101) (xy 106.44165 106.348101) (xy 106.94165 106.348101) (xy 106.94165 107.073099) + (xy 123.575386 91.406967) (xy 123.618651 91.450232) (xy 123.626067 91.469553) (xy 123.63465 91.501585) + (xy 123.634652 91.501589) (xy 123.693957 91.604308) (xy 123.693959 91.60431) (xy 123.693961 91.604313) + (xy 123.774955 91.685307) (xy 123.802731 91.739822) (xy 123.80395 91.755309) (xy 123.80395 92.315531) + (xy 123.801481 92.323128) (xy 123.802731 92.331018) (xy 123.792206 92.351673) (xy 123.785043 92.373722) + (xy 123.774954 92.385535) (xy 123.641885 92.518604) (xy 123.587368 92.546381) (xy 123.571881 92.5476) + (xy 123.308167 92.5476) (xy 123.24604 92.559957) (xy 123.175587 92.607033) (xy 123.175583 92.607037) + (xy 123.128507 92.67749) (xy 123.11615 92.739617) (xy 123.11615 92.906582) (xy 123.128507 92.968708) + (xy 123.161509 93.018099) (xy 123.178117 93.076987) (xy 123.161509 93.128101) (xy 123.128507 93.177491) + (xy 123.11615 93.239617) (xy 123.11615 93.406582) (xy 123.128507 93.468708) (xy 123.161509 93.518099) + (xy 123.178117 93.576987) (xy 123.161509 93.628101) (xy 123.128507 93.677491) (xy 123.11615 93.739617) + (xy 123.11615 93.906582) (xy 123.128507 93.968708) (xy 123.161509 94.018099) (xy 123.178117 94.076987) + (xy 123.161509 94.128101) (xy 123.128507 94.177491) (xy 123.11615 94.239617) (xy 123.11615 94.406582) + (xy 123.128507 94.468708) (xy 123.161509 94.518099) (xy 123.178117 94.576987) (xy 123.161509 94.628101) + (xy 123.128507 94.677491) (xy 123.11615 94.739617) (xy 123.11615 94.906582) (xy 123.128507 94.968708) + (xy 123.161509 95.018099) (xy 123.178117 95.076987) (xy 123.161509 95.128101) (xy 123.128507 95.177491) + (xy 123.11615 95.239617) (xy 123.11615 95.406582) (xy 123.128507 95.468708) (xy 123.161509 95.518099) + (xy 123.178117 95.576987) (xy 123.161509 95.628101) (xy 123.128507 95.677491) (xy 123.11615 95.739617) + (xy 123.11615 95.906582) (xy 123.128507 95.968709) (xy 123.169192 96.029597) (xy 123.185801 96.088485) + (xy 123.164624 96.145889) (xy 123.149328 96.161416) (xy 123.143203 96.166394) (xy 123.105937 96.187911) + (xy 123.058984 96.234863) (xy 123.055028 96.23808) (xy 123.031005 96.247354) (xy 123.008063 96.259044) + (xy 123.002861 96.25822) (xy 122.997949 96.260117) (xy 122.973063 96.2535) (xy 122.947631 96.249472) + (xy 122.939094 96.244468) (xy 122.938818 96.244395) (xy 122.93868 96.244226) (xy 122.937575 96.243578) + (xy 122.887259 96.209957) (xy 122.825132 96.1976) (xy 122.82513 96.1976) (xy 122.65817 96.1976) + (xy 122.658167 96.1976) (xy 122.596041 96.209957) (xy 122.546651 96.242959) (xy 122.487763 96.259567) + (xy 122.436649 96.242959) (xy 122.387258 96.209957) (xy 122.387259 96.209957) (xy 122.325132 96.1976) + (xy 122.32513 96.1976) (xy 122.15817 96.1976) (xy 122.158167 96.1976) (xy 122.096041 96.209957) + (xy 122.046651 96.242959) (xy 121.987763 96.259567) (xy 121.936649 96.242959) (xy 121.887258 96.209957) + (xy 121.887259 96.209957) (xy 121.825132 96.1976) (xy 121.82513 96.1976) (xy 121.65817 96.1976) + (xy 121.658167 96.1976) (xy 121.596041 96.209957) (xy 121.546651 96.242959) (xy 121.487763 96.259567) + (xy 121.436649 96.242959) (xy 121.387258 96.209957) (xy 121.387259 96.209957) (xy 121.325132 96.1976) + (xy 121.32513 96.1976) (xy 121.15817 96.1976) (xy 121.158167 96.1976) (xy 121.096041 96.209957) + (xy 121.046651 96.242959) (xy 120.987763 96.259567) (xy 120.936649 96.242959) (xy 120.887258 96.209957) + (xy 120.887259 96.209957) (xy 120.825132 96.1976) (xy 120.82513 96.1976) (xy 120.65817 96.1976) + (xy 120.658167 96.1976) (xy 120.59604 96.209957) (xy 120.525587 96.257033) (xy 120.525583 96.257037) + (xy 120.478507 96.32749) (xy 120.46615 96.389617) (xy 120.46615 97.156582) (xy 120.478507 97.218709) + (xy 120.482239 97.227717) (xy 120.479387 97.228898) (xy 120.49115 97.26766) (xy 120.49115 97.983628) + (xy 120.529284 98.075694) (xy 120.529285 98.075695) (xy 120.529286 98.075697) (xy 121.350686 98.897097) + (xy 121.350685 98.897097) (xy 121.395985 98.942396) (xy 121.423763 98.996912) (xy 121.414192 99.057344) + (xy 121.370928 99.100609) (xy 121.325982 99.1114) (xy 120.220155 99.1114) (xy 120.046185 99.146004) + (xy 119.943972 99.188343) (xy 119.943971 99.188343) (xy 119.882305 99.213885) (xy 119.882304 99.213885) + (xy 119.757768 99.297099) (xy 119.734817 99.312434) (xy 116.748684 102.298566) (xy 116.748683 102.298567) + (xy 116.743204 102.306769) (xy 116.743202 102.306772) (xy 116.650135 102.446054) (xy 116.650135 102.446055) + (xy 116.62904 102.496985) (xy 116.62904 102.496986) (xy 116.582254 102.609935) (xy 116.54765 102.783905) + (xy 116.54765 105.802494) (xy 116.582254 105.976464) (xy 116.650136 106.140346) (xy 116.686523 106.194801) + (xy 116.686524 106.194803) (xy 116.74241 106.278444) (xy 116.748686 106.287836) (xy 117.249946 106.789095) + (xy 117.678746 107.217895) (xy 117.706523 107.272412) (xy 117.696952 107.332844) (xy 117.678746 107.357903) + (xy 116.132183 108.904467) (xy 116.033637 109.051953) (xy 115.965756 109.21583) (xy 115.965754 109.215836) + (xy 115.93115 109.389805) (xy 115.93115 109.567194) (xy 115.965754 109.741163) (xy 115.965756 109.741169) + (xy 116.033637 109.905046) (xy 116.132183 110.052532) (xy 116.132186 110.052536) (xy 116.257614 110.177964) + (xy 116.405103 110.276512) (xy 116.568984 110.344395) (xy 116.742958 110.379) (xy 116.742959 110.379) + (xy 116.920341 110.379) (xy 116.920342 110.379) (xy 117.094316 110.344395) (xy 117.258197 110.276512) + (xy 117.405686 110.177964) (xy 119.237854 108.345796) (xy 119.292371 108.318019) (xy 119.307858 108.3168) + (xy 121.60716 108.3168) (xy 121.665351 108.335707) (xy 121.701315 108.385207) (xy 121.701315 108.446393) + (xy 121.665351 108.495893) (xy 121.645045 108.507264) (xy 121.573653 108.536834) (xy 121.503185 108.607302) + (xy 121.503186 108.607303) (xy 121.503185 108.607304) (xy 118.441884 111.668604) (xy 118.387367 111.696381) + (xy 118.37188 111.6976) (xy 117.881014 111.6976) (xy 117.83722 111.70398) (xy 117.808023 111.708234) + (xy 117.69544 111.763273) (xy 117.606823 111.85189) (xy 117.551784 111.964473) (xy 117.551784 111.964475) + (xy 117.548374 111.987874) (xy 117.521277 112.042729) (xy 117.46711 112.071181) (xy 117.45041 112.0726) + (xy 116.386187 112.0726) (xy 116.327996 112.053693) (xy 116.292032 112.004193) (xy 116.288222 111.987875) + (xy 116.282223 111.946707) (xy 116.275445 111.932843) (xy 116.230848 111.841617) (xy 116.148133 111.758902) + (xy 116.128492 111.7493) (xy 116.043045 111.707527) (xy 116.008053 111.702429) (xy 115.97491 111.6976) + (xy 115.50839 111.6976) (xy 115.475247 111.702429) (xy 115.440254 111.707527) (xy 115.335168 111.758901) + (xy 115.252451 111.841618) (xy 115.201077 111.946704) (xy 115.198488 111.964473) (xy 115.19115 112.01484) + (xy 115.19115 112.63136) (xy 115.192751 112.642346) (xy 115.201077 112.699496) (xy 115.205148 112.707822) + (xy 115.20615 112.714912) (xy 115.210361 112.720707) (xy 115.210361 112.744677) (xy 115.213717 112.768404) + (xy 115.210361 112.774729) (xy 115.210361 112.781893) (xy 115.196271 112.801285) (xy 115.185041 112.822453) + (xy 115.178607 112.825598) (xy 115.174397 112.831393) (xy 115.151601 112.838799) (xy 115.130072 112.849324) + (xy 115.116206 112.8503) (xy 115.014117 112.8503) (xy 114.955926 112.831393) (xy 114.944113 112.821303) + (xy 114.671146 112.548335) (xy 114.643369 112.493819) (xy 114.64215 112.478332) (xy 114.64215 112.014843) + (xy 114.64215 112.01484) (xy 114.632223 111.946707) (xy 114.632221 111.946703) (xy 114.605422 111.891884) + (xy 114.580848 111.841617) (xy 114.498133 111.758902) (xy 114.478492 111.7493) (xy 114.393045 111.707527) + (xy 114.358053 111.702429) (xy 114.32491 111.6976) (xy 113.85839 111.6976) (xy 113.825247 111.702429) + (xy 113.790254 111.707527) (xy 113.685168 111.758901) (xy 113.602451 111.841618) (xy 113.551076 111.946707) + (xy 113.545078 111.987875) (xy 113.517978 112.042731) (xy 113.46381 112.071182) (xy 113.447113 112.0726) + (xy 112.386187 112.0726) (xy 112.327996 112.053693) (xy 112.292032 112.004193) (xy 112.288222 111.987875) + (xy 112.282223 111.946707) (xy 112.275445 111.932843) (xy 112.230848 111.841617) (xy 112.148133 111.758902) + (xy 112.128492 111.7493) (xy 112.043045 111.707527) (xy 112.008053 111.702429) (xy 111.97491 111.6976) + (xy 111.50839 111.6976) (xy 111.475247 111.702429) (xy 111.440254 111.707527) (xy 111.357471 111.747998) + (xy 111.296889 111.756569) (xy 111.242839 111.727893) (xy 111.215967 111.672925) (xy 111.218365 111.633433) + (xy 111.219946 111.627535) (xy 111.22775 111.598409) (xy 111.22775 111.479791) (xy 111.197049 111.365214) + (xy 111.197047 111.365211) (xy 111.197047 111.365209) (xy 111.137742 111.262491) (xy 111.13774 111.262489) + (xy 111.137739 111.262487) (xy 111.053863 111.178611) (xy 111.05386 111.178609) (xy 111.053858 111.178607) + (xy 110.951139 111.119302) (xy 110.95114 111.119302) (xy 110.937601 111.115674) (xy 110.836559 111.0886) + (xy 110.717941 111.0886) (xy 110.647817 111.107389) (xy 110.603359 111.119302) (xy 110.500641 111.178607) + (xy 110.416757 111.262491) (xy 110.357452 111.365209) (xy 110.345244 111.41077) (xy 110.338759 111.434975) + (xy 110.32675 111.479792) (xy 110.32675 111.594332) (xy 110.324283 111.601923) (xy 110.325533 111.609808) + (xy 110.315008 111.630469) (xy 110.307843 111.652523) (xy 110.297762 111.664327) (xy 110.293495 111.668595) + (xy 110.238981 111.696379) (xy 110.223483 111.6976) (xy 109.85839 111.6976) (xy 109.825247 111.702429) + (xy 109.790254 111.707527) (xy 109.685168 111.758901) (xy 109.602451 111.841618) (xy 109.551077 111.946704) + (xy 109.548488 111.964473) (xy 109.54115 112.01484) (xy 109.54115 112.63136) (xy 109.542751 112.642346) + (xy 109.551077 112.699495) (xy 109.591561 112.782305) (xy 109.602452 112.804583) (xy 109.685167 112.887298) + (xy 109.738935 112.913583) (xy 109.790254 112.938672) (xy 109.790255 112.938672) (xy 109.790257 112.938673) + (xy 109.85839 112.9486) (xy 109.858393 112.9486) (xy 110.324907 112.9486) (xy 110.32491 112.9486) + (xy 110.393043 112.938673) (xy 110.393044 112.938672) (xy 110.400651 112.937564) (xy 110.400887 112.939189) + (xy 110.422188 112.939495) (xy 110.452474 112.93977) (xy 110.452694 112.939933) (xy 110.452968 112.939937) + (xy 110.4773 112.958153) (xy 110.501646 112.976181) (xy 110.501706 112.976425) (xy 110.501948 112.976606) + (xy 110.520025 113.034541) (xy 110.519929 113.045062) (xy 110.51885 113.049091) (xy 110.51885 113.164086) + (xy 110.518846 113.164528) (xy 110.509262 113.193139) (xy 110.499943 113.221821) (xy 110.499468 113.222376) + (xy 110.499412 113.222545) (xy 110.499188 113.222704) (xy 110.489854 113.233634) (xy 106.675585 117.047904) + (xy 106.621068 117.075681) (xy 106.605581 117.0769) (xy 101.825321 117.0769) (xy 101.76713 117.057993) + (xy 101.731166 117.008493) (xy 101.731166 116.947307) (xy 101.737112 116.932955) (xy 101.752525 116.902704) + (xy 101.752525 116.902703) (xy 101.752528 116.902698) (xy 101.76715 116.810376) (xy 101.76715 115.835824) + (xy 101.752528 115.743502) (xy 101.69583 115.632227) (xy 101.607523 115.54392) (xy 101.60752 115.543918) + (xy 101.607521 115.543918) (xy 101.489305 115.483684) (xy 101.490205 115.481917) (xy 101.449024 115.451992) + (xy 101.430122 115.393799) (xy 101.443385 115.344308) (xy 101.490049 115.263486) (xy 101.52075 115.148909) + (xy 101.52075 115.030291) (xy 101.490049 114.915714) (xy 101.490047 114.915711) (xy 101.490047 114.915709) + (xy 101.430742 114.812991) (xy 101.43074 114.812989) (xy 101.430739 114.812987) (xy 101.346863 114.729111) + (xy 101.34686 114.729109) (xy 101.346858 114.729107) (xy 101.244139 114.669802) (xy 101.24414 114.669802) + (xy 101.230601 114.666174) (xy 101.129559 114.6391) (xy 101.010941 114.6391) (xy 100.940817 114.657889) + (xy 100.896359 114.669802) (xy 100.793641 114.729107) (xy 100.709757 114.812991) (xy 100.650452 114.915709) + (xy 100.64019 114.954007) (xy 100.61975 115.030291) (xy 100.61975 115.148909) (xy 100.634137 115.2026) + (xy 100.650452 115.26349) (xy 100.709757 115.366208) (xy 100.709759 115.36621) (xy 100.709761 115.366213) + (xy 100.711225 115.367677) (xy 100.711897 115.368997) (xy 100.71371 115.371359) (xy 100.713272 115.371694) + (xy 100.739001 115.422192) (xy 100.72943 115.482624) (xy 100.686166 115.525888) (xy 100.650779 115.543918) + (xy 100.562468 115.632229) (xy 100.505773 115.743498) (xy 100.505772 115.743502) (xy 100.49115 115.835821) + (xy 100.49115 116.810378) (xy 100.505772 116.902697) (xy 100.505774 116.902704) (xy 100.521188 116.932955) + (xy 100.522437 116.940842) (xy 100.527134 116.947307) (xy 100.527134 116.970494) (xy 100.53076 116.993387) + (xy 100.527134 117.000503) (xy 100.527134 117.008493) (xy 100.513505 117.02725) (xy 100.502983 117.047903) + (xy 100.495866 117.051529) (xy 100.49117 117.057993) (xy 100.469119 117.065157) (xy 100.448466 117.075681) + (xy 100.432979 117.0769) (xy 100.403217 117.0769) (xy 100.345026 117.057993) (xy 100.333213 117.047903) + (xy 99.921146 116.635835) (xy 99.893369 116.581319) (xy 99.89215 116.565832) (xy 99.89215 115.835821) + (xy 99.887439 115.806085) (xy 99.877528 115.743502) (xy 99.82083 115.632227) (xy 99.732523 115.54392) + (xy 99.73252 115.543918) (xy 99.732521 115.543918) (xy 99.621251 115.487223) (xy 99.621248 115.487222) + (xy 99.587753 115.481917) (xy 99.528929 115.4726) (xy 99.528926 115.4726) (xy 98.979374 115.4726) + (xy 98.979371 115.4726) (xy 98.887052 115.487222) (xy 98.887048 115.487223) (xy 98.775779 115.543918) + (xy 98.687468 115.632229) (xy 98.630773 115.743498) (xy 98.630772 115.743502) (xy 98.61615 115.835821) + (xy 98.61615 116.565831) (xy 98.597243 116.624022) (xy 98.587154 116.635835) (xy 98.341685 116.881304) + (xy 98.287168 116.909081) (xy 98.271681 116.9103) (xy 97.98078 116.9103) (xy 97.922589 116.891393) + (xy 97.886625 116.841893) (xy 97.886625 116.780707) (xy 97.886805 116.78016) (xy 97.906506 116.720703) + (xy 97.91665 116.621423) (xy 97.91665 116.573101) (xy 97.916649 116.5731) (xy 97.06565 116.5731) + (xy 97.007459 116.554193) (xy 96.971495 116.504693) (xy 96.96665 116.4741) (xy 96.96665 116.323101) + (xy 96.966649 116.3231) (xy 96.81565 116.3231) (xy 96.757459 116.304193) (xy 96.721495 116.254693) + (xy 96.71665 116.2241) (xy 96.71665 115.418369) (xy 96.719118 115.410771) (xy 96.717869 115.402882) + (xy 96.728393 115.382226) (xy 96.735557 115.360178) (xy 96.745646 115.348365) (xy 96.74591 115.348101) + (xy 97.21665 115.348101) (xy 97.21665 116.073099) (xy 97.216651 116.0731) (xy 97.916648 116.0731) + (xy 97.916649 116.073099) (xy 97.916649 116.024777) (xy 97.906507 115.925502) (xy 97.906504 115.92549) + (xy 97.853195 115.764612) (xy 97.764224 115.62037) (xy 97.644379 115.500525) (xy 97.500137 115.411554) + (xy 97.339253 115.358243) (xy 97.239973 115.3481) (xy 97.216651 115.3481) (xy 97.21665 115.348101) + (xy 96.74591 115.348101) (xy 98.399515 113.694496) (xy 98.454032 113.666719) (xy 98.469519 113.6655) + (xy 102.699579 113.6655) (xy 102.760395 113.640309) (xy 102.791647 113.627364) (xy 103.441414 112.977595) + (xy 103.495931 112.949819) (xy 103.511418 112.9486) (xy 103.974907 112.9486) (xy 103.97491 112.9486) + (xy 104.043043 112.938673) (xy 104.148133 112.887298) (xy 104.230848 112.804583) (xy 104.282223 112.699493) + (xy 104.286805 112.668047) (xy 104.288222 112.658325) (xy 104.315322 112.603469) (xy 104.36949 112.575018) + (xy 104.386187 112.5736) (xy 105.447113 112.5736) (xy 105.505304 112.592507) (xy 105.541268 112.642007) + (xy 105.545078 112.658325) (xy 105.551076 112.699492) (xy 105.591561 112.782305) (xy 105.602452 112.804583) + (xy 105.685167 112.887298) (xy 105.738935 112.913583) (xy 105.790254 112.938672) (xy 105.790255 112.938672) + (xy 105.790257 112.938673) (xy 105.85839 112.9486) (xy 105.858393 112.9486) (xy 106.324907 112.9486) + (xy 106.32491 112.9486) (xy 106.393043 112.938673) (xy 106.498133 112.887298) (xy 106.580848 112.804583) + (xy 106.632223 112.699493) (xy 106.64215 112.63136) (xy 106.64215 112.573101) (xy 106.841651 112.573101) + (xy 106.841651 112.654682) (xy 106.848058 112.725203) (xy 106.84806 112.725209) (xy 106.898629 112.887492) + (xy 106.898632 112.8875) (xy 106.986574 113.032972) (xy 107.106777 113.153175) (xy 107.252249 113.241117) + (xy 107.252257 113.24112) (xy 107.414539 113.291689) (xy 107.414545 113.291691) (xy 107.485075 113.298098) + (xy 107.49165 113.298098) (xy 107.49165 112.573101) (xy 107.99165 112.573101) (xy 107.99165 113.298098) + (xy 107.991651 113.298099) (xy 107.998216 113.298099) (xy 107.998232 113.298098) (xy 108.068753 113.291691) + (xy 108.068759 113.291689) (xy 108.231042 113.24112) (xy 108.23105 113.241117) (xy 108.376522 113.153175) + (xy 108.496725 113.032972) (xy 108.584667 112.8875) (xy 108.58467 112.887492) (xy 108.635239 112.72521) + (xy 108.635241 112.725204) (xy 108.641649 112.654681) (xy 108.64165 112.654668) (xy 108.64165 112.573101) + (xy 108.641649 112.5731) (xy 107.991651 112.5731) (xy 107.99165 112.573101) (xy 107.49165 112.573101) + (xy 107.491649 112.5731) (xy 106.841652 112.5731) (xy 106.841651 112.573101) (xy 106.64215 112.573101) + (xy 106.64215 112.167867) (xy 106.661057 112.109676) (xy 106.671135 112.097874) (xy 106.698778 112.070231) + (xy 106.753293 112.042456) (xy 106.813725 112.052027) (xy 106.838784 112.070233) (xy 106.841651 112.0731) + (xy 107.491649 112.0731) (xy 107.49165 112.073099) (xy 107.49165 111.348101) (xy 107.99165 111.348101) + (xy 107.99165 112.073099) (xy 107.991651 112.0731) (xy 108.641648 112.0731) (xy 108.641649 112.073099) + (xy 108.641649 111.991533) (xy 108.641648 111.991517) (xy 108.635241 111.920996) (xy 108.635239 111.92099) + (xy 108.58467 111.758707) (xy 108.584667 111.758699) (xy 108.496725 111.613227) (xy 108.376522 111.493024) + (xy 108.23105 111.405082) (xy 108.231042 111.405079) (xy 108.06876 111.35451) (xy 108.068754 111.354508) + (xy 107.998231 111.3481) (xy 107.991651 111.3481) (xy 107.99165 111.348101) (xy 107.49165 111.348101) + (xy 107.491648 111.348099) (xy 107.485075 111.3481) (xy 107.414546 111.354508) (xy 107.325546 111.382242) + (xy 107.264365 111.381502) (xy 107.215304 111.344942) (xy 107.210365 111.337235) (xy 107.192439 111.306187) + (xy 107.108563 111.222311) (xy 107.10856 111.222309) (xy 107.108558 111.222307) (xy 107.005839 111.163002) + (xy 107.00584 111.163002) (xy 106.992301 111.159374) (xy 106.891259 111.1323) (xy 106.772641 111.1323) + (xy 106.702517 111.151089) (xy 106.658059 111.163002) (xy 106.555341 111.222307) (xy 106.471457 111.306191) + (xy 106.412152 111.408909) (xy 106.408666 111.421919) (xy 106.384919 111.510547) (xy 106.38145 111.523492) + (xy 106.38145 111.5986) (xy 106.362543 111.656791) (xy 106.313043 111.692755) (xy 106.28245 111.6976) + (xy 105.85839 111.6976) (xy 105.825247 111.702429) (xy 105.790254 111.707527) (xy 105.685168 111.758901) + (xy 105.602451 111.841618) (xy 105.551076 111.946707) (xy 105.545078 111.987875) (xy 105.517978 112.042731) + (xy 105.46381 112.071182) (xy 105.447113 112.0726) (xy 104.386187 112.0726) (xy 104.327996 112.053693) + (xy 104.292032 112.004193) (xy 104.288222 111.987875) (xy 104.282223 111.946707) (xy 104.275445 111.932843) + (xy 104.230848 111.841617) (xy 104.148133 111.758902) (xy 104.128492 111.7493) (xy 104.043045 111.707527) + (xy 104.008053 111.702429) (xy 103.97491 111.6976) (xy 103.50839 111.6976) (xy 103.475247 111.702429) + (xy 103.440254 111.707527) (xy 103.335168 111.758901) (xy 103.252451 111.841618) (xy 103.201077 111.946704) + (xy 103.198488 111.964473) (xy 103.191151 112.014837) (xy 103.19115 112.014843) (xy 103.19115 112.478331) + (xy 103.172243 112.536522) (xy 103.162151 112.548337) (xy 103.146802 112.563685) (xy 103.092285 112.591461) + (xy 103.031853 112.581887) (xy 102.98859 112.538621) (xy 102.97902 112.478189) (xy 102.979703 112.474364) + (xy 102.981067 112.467507) (xy 102.99215 112.411791) (xy 102.99215 109.195818) (xy 102.999686 109.157932) + (xy 103.056545 109.020666) (xy 103.09115 108.846692) (xy 103.09115 108.669308) (xy 103.056545 108.495334) + (xy 102.988662 108.331453) (xy 102.890114 108.183964) (xy 102.823751 108.117601) (xy 102.795976 108.063087) + (xy 102.805547 108.002655) (xy 102.848812 107.95939) (xy 102.893757 107.9486) (xy 102.924907 107.9486) + (xy 102.92491 107.9486) (xy 102.993043 107.938673) (xy 103.098133 107.887298) (xy 103.180848 107.804583) + (xy 103.232223 107.699493) (xy 103.24215 107.63136) (xy 103.24215 107.167867) (xy 103.261057 107.109677) + (xy 103.271146 107.097864) (xy 103.35417 107.01484) (xy 104.49115 107.01484) (xy 104.49115 107.63136) + (xy 104.497145 107.672507) (xy 104.501077 107.699495) (xy 104.538873 107.776807) (xy 104.552452 107.804583) + (xy 104.635167 107.887298) (xy 104.688935 107.913583) (xy 104.740254 107.938672) (xy 104.740255 107.938672) + (xy 104.740257 107.938673) (xy 104.80839 107.9486) (xy 104.808393 107.9486) (xy 105.274907 107.9486) + (xy 105.27491 107.9486) (xy 105.343043 107.938673) (xy 105.448133 107.887298) (xy 105.530848 107.804583) + (xy 105.582223 107.699493) (xy 105.59215 107.63136) (xy 105.59215 107.573101) (xy 105.791651 107.573101) + (xy 105.791651 107.654682) (xy 105.798058 107.725203) (xy 105.79806 107.725209) (xy 105.848629 107.887492) + (xy 105.848632 107.8875) (xy 105.936574 108.032972) (xy 106.056777 108.153175) (xy 106.202249 108.241117) + (xy 106.202257 108.24112) (xy 106.364539 108.291689) (xy 106.364545 108.291691) (xy 106.435075 108.298098) + (xy 106.44165 108.298098) (xy 106.44165 107.573101) (xy 106.94165 107.573101) (xy 106.94165 108.298098) + (xy 106.941651 108.298099) (xy 106.948216 108.298099) (xy 106.948232 108.298098) (xy 107.018753 108.291691) + (xy 107.018759 108.291689) (xy 107.181042 108.24112) (xy 107.18105 108.241117) (xy 107.326522 108.153175) + (xy 107.446725 108.032972) (xy 107.534667 107.8875) (xy 107.53467 107.887492) (xy 107.585239 107.72521) + (xy 107.585241 107.725204) (xy 107.591649 107.654681) (xy 107.59165 107.654668) (xy 107.59165 107.573101) + (xy 107.591649 107.5731) (xy 106.941651 107.5731) (xy 106.94165 107.573101) (xy 106.44165 107.573101) + (xy 106.441649 107.5731) (xy 105.791652 107.5731) (xy 105.791651 107.573101) (xy 105.59215 107.573101) + (xy 105.59215 107.01484) (xy 105.582223 106.946707) (xy 105.56121 106.903725) (xy 105.558474 106.884383) + (xy 105.551331 106.866202) (xy 105.554289 106.854804) (xy 105.55264 106.843145) (xy 105.561795 106.825886) + (xy 105.566704 106.806979) (xy 105.575083 106.80084) (xy 105.581315 106.789095) (xy 105.61395 106.768102) + (xy 105.619133 106.766065) (xy 105.654836 106.756499) (xy 105.679015 106.742538) (xy 105.6859 106.739834) + (xy 105.709413 106.738416) (xy 105.732448 106.73352) (xy 105.739389 106.73661) (xy 105.746975 106.736153) + (xy 105.766829 106.748826) (xy 105.788344 106.758405) (xy 105.792143 106.764984) (xy 105.798549 106.769074) + (xy 105.807163 106.790999) (xy 105.818938 106.811393) (xy 105.81854 106.819959) (xy 105.820923 106.826022) + (xy 105.817681 106.83851) (xy 105.816619 106.86143) (xy 105.79806 106.920986) (xy 105.798058 106.920995) + (xy 105.79165 106.991518) (xy 105.79165 107.073099) (xy 105.791651 107.0731) (xy 106.441649 107.0731) + (xy 106.44165 107.073099) (xy 106.44165 106.348101) (xy 106.94165 106.348101) (xy 106.94165 107.073099) (xy 106.941651 107.0731) (xy 107.591648 107.0731) (xy 107.591649 107.073099) (xy 107.591649 106.991533) (xy 107.591648 106.991517) (xy 107.585241 106.920996) (xy 107.585239 106.92099) (xy 107.53467 106.758707) (xy 107.534667 106.758699) (xy 107.446725 106.613227) (xy 107.326522 106.493024) (xy 107.18105 106.405082) (xy 107.181042 106.405079) (xy 107.01876 106.35451) (xy 107.018754 106.354508) (xy 106.948231 106.3481) (xy 106.941651 106.3481) (xy 106.94165 106.348101) (xy 106.44165 106.348101) (xy 106.441648 106.348099) - (xy 106.435075 106.3481) (xy 106.364546 106.354508) (xy 106.36454 106.35451) (xy 106.209903 106.402697) - (xy 106.148722 106.401958) (xy 106.09966 106.365399) (xy 106.08145 106.30818) (xy 106.08145 106.257644) - (xy 106.071778 106.221547) (xy 106.040527 106.104916) (xy 105.96147 105.967984) (xy 105.958787 105.965301) - (xy 105.957553 105.962878) (xy 105.957519 105.962834) (xy 105.957527 105.962827) (xy 105.931012 105.910787) - (xy 105.940583 105.850355) (xy 105.983848 105.80709) (xy 106.028793 105.7963) (xy 112.507453 105.7963) - (xy 112.565644 105.815207) (xy 112.601608 105.864707) (xy 112.603079 105.920924) (xy 112.59115 105.96544) - (xy 112.59115 105.965443) (xy 112.59115 106.123557) (xy 112.632073 106.276284) (xy 112.632074 106.276285) - (xy 112.632073 106.276285) (xy 112.651241 106.309485) (xy 112.663962 106.369334) (xy 112.639074 106.425229) - (xy 112.620506 106.441299) (xy 112.521999 106.507119) (xy 112.37567 106.653448) (xy 112.260708 106.825502) - (xy 112.181519 107.016681) (xy 112.14115 107.219632) (xy 112.14115 107.426567) (xy 112.181519 107.629518) - (xy 112.260708 107.820697) (xy 112.372813 107.988475) (xy 112.375673 107.992755) (xy 112.521995 108.139077) - (xy 112.694052 108.254041) (xy 112.88523 108.33323) (xy 113.088185 108.3736) (xy 113.088186 108.3736) - (xy 113.295114 108.3736) (xy 113.295115 108.3736) (xy 113.49807 108.33323) (xy 113.689248 108.254041) - (xy 113.861305 108.139077) (xy 114.007627 107.992755) (xy 114.122591 107.820698) (xy 114.20178 107.62952) - (xy 114.24215 107.426565) (xy 114.24215 107.219635) (xy 114.20178 107.01668) (xy 114.122591 106.825502) - (xy 114.007627 106.653445) (xy 113.861305 106.507123) (xy 113.861299 106.507119) (xy 113.78431 106.455677) - (xy 113.762792 106.441299) (xy 113.724913 106.39325) (xy 113.722511 106.332112) (xy 113.732054 106.309491) - (xy 113.751227 106.276284) (xy 113.79215 106.123557) (xy 113.79215 105.965443) (xy 113.780221 105.920923) - (xy 113.783422 105.859822) (xy 113.821927 105.812272) (xy 113.875847 105.7963) (xy 115.253706 105.7963) - (xy 115.311897 105.815207) (xy 115.323709 105.825296) (xy 115.354594 105.85618) (xy 115.374734 105.87632) - (xy 115.511666 105.955377) (xy 115.664393 105.9963) (xy 115.664395 105.9963) (xy 115.822505 105.9963) - (xy 115.822507 105.9963) (xy 115.975234 105.955377) (xy 116.112166 105.87632) (xy 116.22397 105.764516) - (xy 116.223971 105.764513) (xy 116.228558 105.759927) (xy 116.230581 105.76195) (xy 116.271149 105.734035) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 97.89394 113.117506) (xy 97.929904 113.167006) (xy 97.929904 113.228192) (xy 97.905753 113.267603) - (xy 95.654753 115.518604) (xy 95.600236 115.546381) (xy 95.584749 115.5476) (xy 95.150501 115.5476) - (xy 95.066058 115.557741) (xy 94.931677 115.610734) (xy 94.816572 115.698022) (xy 94.729284 115.813127) - (xy 94.676291 115.947508) (xy 94.66615 116.031951) (xy 94.66615 116.614251) (xy 94.670383 116.649497) - (xy 94.658548 116.709526) (xy 94.613689 116.751136) (xy 94.572089 116.7603) (xy 94.012091 116.7603) - (xy 93.9539 116.741393) (xy 93.917936 116.691893) (xy 93.913604 116.651238) (xy 93.91665 116.621423) - (xy 93.91665 116.573101) (xy 93.916649 116.5731) (xy 93.06565 116.5731) (xy 93.007459 116.554193) - (xy 92.971495 116.504693) (xy 92.96665 116.4741) (xy 92.96665 116.1721) (xy 92.985557 116.113909) - (xy 93.035057 116.077945) (xy 93.06565 116.0731) (xy 93.916648 116.0731) (xy 93.916649 116.073099) - (xy 93.916649 116.024777) (xy 93.906507 115.925502) (xy 93.906504 115.92549) (xy 93.853195 115.764612) - (xy 93.764224 115.62037) (xy 93.644379 115.500525) (xy 93.500137 115.411554) (xy 93.339253 115.358243) - (xy 93.239973 115.3481) (xy 93.197049 115.3481) (xy 93.138858 115.329193) (xy 93.102894 115.279693) - (xy 93.102894 115.218507) (xy 93.127044 115.179098) (xy 93.38713 114.919013) (xy 93.412063 114.875827) - (xy 93.439857 114.827687) (xy 93.46715 114.725827) (xy 93.46715 113.6304) (xy 93.486057 113.572209) - (xy 93.535557 113.536245) (xy 93.56615 113.5314) (xy 97.161575 113.5314) (xy 97.161577 113.5314) - (xy 97.263438 113.504107) (xy 97.26344 113.504105) (xy 97.263442 113.504105) (xy 97.354763 113.45138) - (xy 97.593056 113.213086) (xy 97.678545 113.127595) (xy 97.685661 113.123969) (xy 97.690358 113.117506) - (xy 97.712408 113.110341) (xy 97.733062 113.099818) (xy 97.748549 113.098599) (xy 97.835749 113.098599) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 192.443307 114.296707) (xy 192.479271 114.346207) (xy 192.479271 114.407393) (xy 192.470853 114.426299) - (xy 192.416573 114.520314) (xy 192.401131 114.577945) (xy 192.37565 114.673043) (xy 192.37565 114.831157) - (xy 192.402932 114.932975) (xy 192.416573 114.983885) (xy 192.470853 115.077901) (xy 192.483574 115.137749) - (xy 192.458687 115.193644) (xy 192.405699 115.224237) (xy 192.385116 115.2264) (xy 189.790474 115.2264) - (xy 189.732283 115.207493) (xy 189.696319 115.157993) (xy 189.691807 115.123935) (xy 189.69165 115.123935) - (xy 189.69165 115.122747) (xy 189.691601 115.122378) (xy 189.69165 115.121413) (xy 189.69165 115.073101) - (xy 189.691649 115.0731) (xy 188.84065 115.0731) (xy 188.782459 115.054193) (xy 188.746495 115.004693) - (xy 188.74165 114.9741) (xy 188.74165 114.6721) (xy 188.760557 114.613909) (xy 188.810057 114.577945) - (xy 188.84065 114.5731) (xy 189.691648 114.5731) (xy 189.691649 114.573099) (xy 189.691649 114.524777) - (xy 189.681507 114.425502) (xy 189.681504 114.42549) (xy 189.675689 114.40794) (xy 189.675333 114.346756) - (xy 189.711008 114.297047) (xy 189.769088 114.277802) (xy 189.769664 114.2778) (xy 192.385116 114.2778) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 198.861211 111.073333) (xy 198.87653 111.073219) (xy 198.889577 111.08255) (xy 198.904833 111.087507) - (xy 198.926298 111.108812) (xy 198.9495 111.14025) (xy 199.062224 111.223445) (xy 199.097817 111.273213) - (xy 199.097359 111.334396) (xy 199.062224 111.382755) (xy 198.949505 111.465945) (xy 198.949495 111.465955) - (xy 198.868857 111.575216) (xy 198.824005 111.703396) (xy 198.824003 111.703405) (xy 198.82115 111.733825) - (xy 198.82115 112.142374) (xy 198.824003 112.172794) (xy 198.824005 112.172803) (xy 198.868857 112.300983) - (xy 198.949495 112.410244) (xy 198.949497 112.410246) (xy 198.9495 112.41025) (xy 198.949503 112.410252) - (xy 198.949505 112.410254) (xy 199.062224 112.493445) (xy 199.097817 112.543213) (xy 199.097359 112.604396) - (xy 199.062224 112.652755) (xy 198.949505 112.735945) (xy 198.949495 112.735955) (xy 198.868857 112.845216) - (xy 198.824005 112.973396) (xy 198.824003 112.973405) (xy 198.82115 113.003825) (xy 198.82115 113.412374) - (xy 198.824003 113.442794) (xy 198.824005 113.442803) (xy 198.868857 113.570983) (xy 198.949495 113.680244) - (xy 198.949497 113.680246) (xy 198.9495 113.68025) (xy 198.949503 113.680252) (xy 198.949505 113.680254) - (xy 199.062224 113.763445) (xy 199.097817 113.813213) (xy 199.097359 113.874396) (xy 199.062224 113.922755) - (xy 198.949505 114.005945) (xy 198.949495 114.005955) (xy 198.868857 114.115216) (xy 198.824005 114.243396) - (xy 198.824003 114.243405) (xy 198.82115 114.273825) (xy 198.82115 114.580514) (xy 198.802243 114.638705) - (xy 198.792154 114.650518) (xy 198.245268 115.197404) (xy 198.190751 115.225181) (xy 198.175264 115.2264) - (xy 196.208477 115.2264) (xy 196.150286 115.207493) (xy 196.114322 115.157993) (xy 196.114322 115.096807) - (xy 196.150286 115.047307) (xy 196.175779 115.033956) (xy 196.177874 115.033222) (xy 196.184532 115.030893) - (xy 196.2938 114.95025) (xy 196.374443 114.840982) (xy 196.419296 114.712799) (xy 196.422149 114.682373) - (xy 196.42215 114.682373) (xy 196.42215 114.273827) (xy 196.422149 114.273825) (xy 196.419296 114.243405) - (xy 196.419296 114.243401) (xy 196.374443 114.115218) (xy 196.371974 114.111873) (xy 196.293804 114.005955) - (xy 196.293802 114.005953) (xy 196.2938 114.00595) (xy 196.293796 114.005947) (xy 196.293794 114.005945) - (xy 196.181075 113.922755) (xy 196.145482 113.872988) (xy 196.14594 113.811804) (xy 196.181075 113.763445) - (xy 196.25498 113.7089) (xy 196.2938 113.68025) (xy 196.374443 113.570982) (xy 196.419296 113.442799) - (xy 196.422149 113.412373) (xy 196.42215 113.412373) (xy 196.42215 113.003827) (xy 196.422149 113.003825) - (xy 196.419296 112.973405) (xy 196.419296 112.973401) (xy 196.374443 112.845218) (xy 196.37091 112.840431) - (xy 196.293804 112.735955) (xy 196.293802 112.735953) (xy 196.2938 112.73595) (xy 196.293796 112.735947) - (xy 196.293794 112.735945) (xy 196.181075 112.652755) (xy 196.145482 112.602988) (xy 196.14594 112.541804) - (xy 196.181075 112.493445) (xy 196.285739 112.416199) (xy 196.2938 112.41025) (xy 196.374443 112.300982) - (xy 196.419296 112.172799) (xy 196.422149 112.142373) (xy 196.42215 112.142373) (xy 196.42215 111.733827) - (xy 196.422149 111.733825) (xy 196.419296 111.703401) (xy 196.374443 111.575218) (xy 196.372879 111.573099) - (xy 196.316145 111.496226) (xy 196.296803 111.438178) (xy 196.315274 111.379848) (xy 196.345405 111.352225) - (xy 196.373202 111.335785) (xy 196.489334 111.219653) (xy 196.534017 111.144098) (xy 196.579913 111.103635) - (xy 196.640826 111.097876) (xy 196.657117 111.103028) (xy 196.659164 111.103876) (xy 196.659166 111.103877) - (xy 196.811893 111.1448) (xy 196.811895 111.1448) (xy 196.970005 111.1448) (xy 196.970007 111.1448) - (xy 197.122734 111.103877) (xy 197.160864 111.081863) (xy 197.210363 111.0686) (xy 198.846642 111.0686) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 197.626394 101.935207) (xy 197.662358 101.984707) (xy 197.666497 102.027098) (xy 197.666151 102.029978) - (xy 197.66615 102.029999) (xy 197.66615 102.616206) (xy 197.676773 102.704665) (xy 197.732287 102.845439) - (xy 197.732288 102.845441) (xy 197.732289 102.845442) (xy 197.823728 102.966022) (xy 197.944308 103.057461) - (xy 197.987609 103.074536) (xy 198.034805 103.113472) (xy 198.050102 103.172714) (xy 198.027656 103.229633) - (xy 197.98243 103.260608) (xy 197.897524 103.288743) (xy 197.748309 103.38078) (xy 197.62433 103.504759) - (xy 197.532293 103.653975) (xy 197.477143 103.820406) (xy 197.46665 103.923112) (xy 197.46665 103.973099) - (xy 197.466651 103.9731) (xy 198.59265 103.9731) (xy 198.650841 103.992007) (xy 198.686805 104.041507) - (xy 198.69165 104.0721) (xy 198.69165 104.223099) (xy 198.691651 104.2231) (xy 198.84265 104.2231) - (xy 198.900841 104.242007) (xy 198.936805 104.291507) (xy 198.94165 104.3221) (xy 198.94165 105.223098) - (xy 198.941651 105.223099) (xy 199.216635 105.223099) (xy 199.285188 105.216095) (xy 199.344999 105.22899) - (xy 199.385808 105.274578) (xy 199.39425 105.314582) (xy 199.39425 108.6431) (xy 199.375343 108.701291) - (xy 199.325843 108.737255) (xy 199.29525 108.7421) (xy 191.074605 108.7421) (xy 190.919954 108.772861) - (xy 190.774271 108.833205) (xy 190.643161 108.920811) (xy 190.643157 108.920814) (xy 189.661154 109.902817) - (xy 189.606637 109.930594) (xy 189.546205 109.921023) (xy 189.50294 109.877758) (xy 189.49215 109.832813) - (xy 189.49215 105.944259) (xy 189.492149 105.944255) (xy 189.491702 105.942007) (xy 189.461387 105.789603) - (xy 189.401044 105.643921) (xy 189.401043 105.643919) (xy 189.40104 105.643914) (xy 189.341404 105.554664) - (xy 189.313439 105.512811) (xy 189.201939 105.401311) (xy 189.147181 105.346553) (xy 189.119404 105.292036) - (xy 189.128975 105.231604) (xy 189.17224 105.188339) (xy 189.232672 105.178768) (xy 189.248325 105.182574) - (xy 189.338956 105.212606) (xy 189.441662 105.223099) (xy 190.241648 105.223099) (xy 190.24165 105.223098) - (xy 190.24165 104.073101) (xy 190.74165 104.073101) (xy 190.74165 105.223098) (xy 190.741651 105.223099) - (xy 191.541636 105.223099) (xy 191.644337 105.212607) (xy 191.644349 105.212604) (xy 191.810774 105.157456) - (xy 191.95999 105.065419) (xy 192.083969 104.94144) (xy 192.176006 104.792224) (xy 192.231156 104.625793) - (xy 192.24165 104.523087) (xy 192.24165 104.473101) (xy 197.466651 104.473101) (xy 197.466651 104.523086) - (xy 197.477142 104.625787) (xy 197.477145 104.625799) (xy 197.532293 104.792224) (xy 197.62433 104.94144) - (xy 197.748309 105.065419) (xy 197.897525 105.157456) (xy 198.063956 105.212606) (xy 198.166663 105.223099) - (xy 198.441648 105.223099) (xy 198.44165 105.223098) (xy 198.44165 104.473101) (xy 198.441649 104.4731) - (xy 197.466652 104.4731) (xy 197.466651 104.473101) (xy 192.24165 104.473101) (xy 192.24165 104.073101) - (xy 192.241649 104.0731) (xy 190.741651 104.0731) (xy 190.74165 104.073101) (xy 190.24165 104.073101) - (xy 190.241649 104.0731) (xy 188.741652 104.0731) (xy 188.741651 104.073101) (xy 188.741651 104.523086) - (xy 188.752142 104.625787) (xy 188.752145 104.625799) (xy 188.782175 104.716424) (xy 188.782531 104.777608) - (xy 188.746856 104.827317) (xy 188.688776 104.846562) (xy 188.630476 104.827994) (xy 188.618196 104.817568) - (xy 188.071146 104.270518) (xy 188.043369 104.216001) (xy 188.04215 104.200514) (xy 188.04215 103.129999) - (xy 188.042149 103.129993) (xy 188.041861 103.127595) (xy 188.031527 103.041536) (xy 187.984625 102.922601) - (xy 187.976012 102.90076) (xy 187.976011 102.900759) (xy 187.976011 102.900758) (xy 187.962103 102.882418) - (xy 187.95663 102.866678) (xy 187.946833 102.853193) (xy 187.946833 102.838501) (xy 187.942009 102.824628) - (xy 187.946833 102.808676) (xy 187.946833 102.792007) (xy 187.955468 102.780121) (xy 187.95972 102.766062) - (xy 187.972999 102.755991) (xy 187.982797 102.742507) (xy 187.996768 102.737967) (xy 188.008473 102.729092) - (xy 188.040988 102.7236) (xy 188.180006 102.7236) (xy 188.238197 102.742507) (xy 188.250009 102.752596) - (xy 188.276859 102.779445) (xy 188.301034 102.80362) (xy 188.437966 102.882677) (xy 188.590693 102.9236) - (xy 188.590695 102.9236) (xy 188.652404 102.9236) (xy 188.710595 102.942507) (xy 188.746559 102.992007) - (xy 188.750891 103.032662) (xy 188.74165 103.123112) (xy 188.74165 103.573099) (xy 188.741651 103.5731) - (xy 190.241649 103.5731) (xy 190.24165 103.573099) (xy 190.24165 102.423101) (xy 190.74165 102.423101) - (xy 190.74165 103.573099) (xy 190.741651 103.5731) (xy 192.241648 103.5731) (xy 192.241649 103.573099) - (xy 192.241649 103.123113) (xy 192.231157 103.020412) (xy 192.231154 103.0204) (xy 192.176006 102.853975) - (xy 192.083969 102.704759) (xy 191.95999 102.58078) (xy 191.810774 102.488743) (xy 191.644343 102.433593) - (xy 191.541637 102.4231) (xy 190.741651 102.4231) (xy 190.74165 102.423101) (xy 190.24165 102.423101) - (xy 190.241649 102.4231) (xy 189.441671 102.4231) (xy 189.37931 102.429471) (xy 189.319499 102.416574) - (xy 189.278692 102.370985) (xy 189.27025 102.330983) (xy 189.27025 102.244044) (xy 189.262337 102.214512) - (xy 189.229327 102.091316) (xy 189.214017 102.064799) (xy 189.201296 102.004952) (xy 189.226182 101.949057) - (xy 189.27917 101.918464) (xy 189.299754 101.9163) (xy 197.568203 101.9163) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 120.235525 96.25095) (xy 120.264638 96.255191) (xy 120.26556 96.25609) (xy 120.266831 96.256308) - (xy 120.287374 96.277367) (xy 120.308438 96.297913) (xy 120.308655 96.299183) (xy 120.309555 96.300106) - (xy 120.318761 96.358221) (xy 120.31615 96.376142) (xy 120.31615 97.170043) (xy 120.316151 97.170051) - (xy 120.326428 97.240604) (xy 120.326429 97.240608) (xy 120.328694 97.24524) (xy 120.33109 97.250142) - (xy 120.34115 97.293623) (xy 120.34115 97.881073) (xy 120.34115 97.986527) (xy 120.342819 97.992755) - (xy 120.368444 98.088392) (xy 120.421166 98.179708) (xy 120.421167 98.179709) (xy 120.421168 98.17971) - (xy 120.42117 98.179713) (xy 120.7319 98.490443) (xy 121.033853 98.792396) (xy 121.06163 98.846913) - (xy 121.052059 98.907345) (xy 121.008794 98.95061) (xy 120.963849 98.9614) (xy 120.417215 98.9614) - (xy 120.417195 98.961399) (xy 120.412315 98.961399) (xy 120.205385 98.961399) (xy 120.205382 98.961399) - (xy 120.00243 99.00177) (xy 120.002428 99.00177) (xy 119.811256 99.080955) (xy 119.811244 99.080961) - (xy 119.639195 99.195923) (xy 119.639191 99.195926) (xy 116.778495 102.056623) (xy 116.778494 102.056622) - (xy 116.632172 102.202945) (xy 116.517208 102.375002) (xy 116.438019 102.566181) (xy 116.39765 102.769132) - (xy 116.39765 104.961783) (xy 116.378743 105.019974) (xy 116.329243 105.055938) (xy 116.268057 105.055938) - (xy 116.230649 105.029581) (xy 116.228558 105.031673) (xy 116.223971 105.027086) (xy 116.22397 105.027084) - (xy 116.112166 104.91528) (xy 115.975234 104.836223) (xy 115.822507 104.7953) (xy 115.664393 104.7953) - (xy 115.512397 104.836027) (xy 115.511666 104.836223) (xy 115.374731 104.915282) (xy 115.323709 104.966304) - (xy 115.269192 104.994081) (xy 115.253706 104.9953) (xy 104.671677 104.9953) (xy 104.566223 104.9953) - (xy 104.524028 105.006606) (xy 104.464357 105.022594) (xy 104.373041 105.075316) (xy 104.373036 105.07532) - (xy 102.92975 106.518604) (xy 102.875234 106.546381) (xy 102.859747 106.5476) (xy 102.45645 106.5476) - (xy 102.398259 106.528693) (xy 102.362295 106.479193) (xy 102.35745 106.4486) (xy 102.35745 105.533939) - (xy 102.376357 105.475748) (xy 102.386446 105.463935) (xy 103.606777 104.243604) (xy 104.857627 102.992755) - (xy 104.923394 102.894326) (xy 104.971442 102.856449) (xy 105.03258 102.854047) (xy 105.083454 102.88804) - (xy 105.084961 102.89) (xy 105.100376 102.910591) (xy 105.134104 102.955646) (xy 105.134107 102.955648) - (xy 105.134108 102.955649) (xy 105.24932 103.041897) (xy 105.384161 103.092189) (xy 105.384162 103.092189) - (xy 105.384167 103.092191) (xy 105.443777 103.0986) (xy 105.939522 103.098599) (xy 105.999133 103.092191) - (xy 106.092249 103.057461) (xy 106.133979 103.041897) (xy 106.133979 103.041896) (xy 106.133981 103.041896) - (xy 106.249196 102.955646) (xy 106.335446 102.840431) (xy 106.355 102.788001) (xy 106.39305 102.740089) - (xy 106.447758 102.7236) (xy 106.451023 102.7236) (xy 106.785542 102.7236) (xy 106.843733 102.742507) - (xy 106.878299 102.788001) (xy 106.890314 102.820214) (xy 106.897854 102.840432) (xy 106.959855 102.923254) - (xy 106.984104 102.955646) (xy 106.984107 102.955648) (xy 106.984108 102.955649) (xy 107.09932 103.041897) - (xy 107.234161 103.092189) (xy 107.234162 103.092189) (xy 107.234167 103.092191) (xy 107.293777 103.0986) - (xy 107.789522 103.098599) (xy 107.849133 103.092191) (xy 107.942249 103.057461) (xy 107.983979 103.041897) - (xy 107.983979 103.041896) (xy 107.983981 103.041896) (xy 108.099196 102.955646) (xy 108.17419 102.855466) - (xy 108.224197 102.820214) (xy 108.285376 102.821088) (xy 108.334357 102.857755) (xy 108.347957 102.885336) - (xy 108.348628 102.88749) (xy 108.348632 102.8875) (xy 108.436574 103.032972) (xy 108.556777 103.153175) - (xy 108.702249 103.241117) (xy 108.702257 103.24112) (xy 108.864539 103.291689) (xy 108.864545 103.291691) - (xy 108.935075 103.298098) (xy 108.94165 103.298098) (xy 108.94165 102.573101) (xy 109.44165 102.573101) - (xy 109.44165 103.298098) (xy 109.441651 103.298099) (xy 109.448216 103.298099) (xy 109.448232 103.298098) - (xy 109.518753 103.291691) (xy 109.518759 103.291689) (xy 109.681042 103.24112) (xy 109.68105 103.241117) - (xy 109.826522 103.153175) (xy 109.946725 103.032972) (xy 110.034667 102.8875) (xy 110.03467 102.887492) - (xy 110.085239 102.72521) (xy 110.085241 102.725204) (xy 110.091649 102.654681) (xy 110.09165 102.654668) - (xy 110.09165 102.573101) (xy 110.091649 102.5731) (xy 109.441651 102.5731) (xy 109.44165 102.573101) - (xy 108.94165 102.573101) (xy 108.94165 101.348101) (xy 109.44165 101.348101) (xy 109.44165 102.073099) - (xy 109.441651 102.0731) (xy 110.091648 102.0731) (xy 110.091649 102.073099) (xy 110.091649 102.000229) - (xy 110.84115 102.000229) (xy 110.84115 102.645966) (xy 110.841151 102.64597) (xy 110.847558 102.70558) - (xy 110.847559 102.705585) (xy 110.897852 102.840429) (xy 110.959855 102.923254) (xy 110.984104 102.955646) - (xy 110.984107 102.955648) (xy 110.984108 102.955649) (xy 111.09932 103.041897) (xy 111.234161 103.092189) - (xy 111.234162 103.092189) (xy 111.234167 103.092191) (xy 111.293777 103.0986) (xy 111.709749 103.098599) - (xy 111.76794 103.117506) (xy 111.779752 103.127595) (xy 112.007907 103.355749) (xy 112.007912 103.355755) - (xy 112.007913 103.355755) (xy 112.011368 103.35921) (xy 112.01137 103.359213) (xy 112.085937 103.43378) - (xy 112.116491 103.45142) (xy 112.155232 103.473788) (xy 112.155235 103.473789) (xy 112.177263 103.486507) - (xy 112.27912 103.5138) (xy 112.279122 103.513801) (xy 112.279123 103.513801) (xy 112.39064 103.513801) - (xy 112.390656 103.5138) (xy 113.412106 103.5138) (xy 113.470297 103.532707) (xy 113.482109 103.542796) - (xy 113.512413 103.573099) (xy 113.533134 103.59382) (xy 113.670066 103.672877) (xy 113.822793 103.7138) - (xy 113.822795 103.7138) (xy 113.980905 103.7138) (xy 113.980907 103.7138) (xy 114.133634 103.672877) - (xy 114.270566 103.59382) (xy 114.38237 103.482016) (xy 114.461427 103.345084) (xy 114.50235 103.192357) - (xy 114.50235 103.034243) (xy 114.461427 102.881516) (xy 114.38237 102.744584) (xy 114.270566 102.63278) - (xy 114.133634 102.553723) (xy 113.980907 102.5128) (xy 113.822793 102.5128) (xy 113.746429 102.533261) - (xy 113.670064 102.553723) (xy 113.659476 102.559837) (xy 113.609977 102.5731) (xy 113.29065 102.5731) - (xy 113.232459 102.554193) (xy 113.196495 102.504693) (xy 113.19165 102.4741) (xy 113.19165 102.323101) - (xy 113.191649 102.3231) (xy 113.04065 102.3231) (xy 112.982459 102.304193) (xy 112.946495 102.254693) - (xy 112.94165 102.2241) (xy 112.94165 101.348101) (xy 113.44165 101.348101) (xy 113.44165 102.073099) + (xy 106.435075 106.3481) (xy 106.364546 106.354508) (xy 106.36454 106.35451) (xy 106.202257 106.405079) + (xy 106.202249 106.405082) (xy 106.081667 106.477978) (xy 106.022087 106.491902) (xy 105.965701 106.468146) + (xy 105.934048 106.415785) (xy 105.93145 106.393256) (xy 105.93145 106.277392) (xy 105.930434 106.273599) + (xy 105.900749 106.162814) (xy 105.900747 106.162811) (xy 105.900747 106.162809) (xy 105.841442 106.060091) + (xy 105.84144 106.060089) (xy 105.841439 106.060087) (xy 105.757563 105.976211) (xy 105.75756 105.976209) + (xy 105.757558 105.976207) (xy 105.654839 105.916902) (xy 105.65484 105.916902) (xy 105.641301 105.913274) + (xy 105.540259 105.8862) (xy 105.421641 105.8862) (xy 105.351517 105.904989) (xy 105.307059 105.916902) + (xy 105.204341 105.976207) (xy 105.120457 106.060091) (xy 105.061152 106.162809) (xy 105.051563 106.198597) + (xy 105.031467 106.273598) (xy 105.03045 106.277392) (xy 105.03045 106.391931) (xy 105.011543 106.450122) + (xy 105.001458 106.461929) (xy 104.899753 106.563636) (xy 104.899752 106.563635) (xy 104.829286 106.634102) + (xy 104.829285 106.634103) (xy 104.824163 106.64647) (xy 104.784425 106.692995) (xy 104.746979 106.706547) + (xy 104.740259 106.707526) (xy 104.635168 106.758901) (xy 104.552451 106.841618) (xy 104.501077 106.946704) + (xy 104.501077 106.946707) (xy 104.49115 107.01484) (xy 103.35417 107.01484) (xy 104.693714 105.675296) + (xy 104.748231 105.647519) (xy 104.763718 105.6463) (xy 112.729886 105.6463) (xy 112.788077 105.665207) + (xy 112.824041 105.714707) (xy 112.824041 105.775893) (xy 112.815622 105.794801) (xy 112.771852 105.870611) + (xy 112.771851 105.870613) (xy 112.771851 105.870614) (xy 112.74115 105.985191) (xy 112.74115 106.103809) + (xy 112.759716 106.173098) (xy 112.771852 106.21839) (xy 112.831157 106.321108) (xy 112.831159 106.32111) + (xy 112.831161 106.321113) (xy 112.851278 106.34123) (xy 112.879054 106.395745) (xy 112.869483 106.456177) + (xy 112.826218 106.499442) (xy 112.819159 106.502696) (xy 112.765103 106.525086) (xy 112.617615 106.623635) + (xy 112.492185 106.749065) (xy 112.393635 106.896554) (xy 112.393635 106.896555) (xy 112.325756 107.060432) + (xy 112.325756 107.060434) (xy 112.29115 107.234406) (xy 112.29115 107.411793) (xy 112.307466 107.493818) + (xy 112.325106 107.5825) (xy 112.325756 107.585765) (xy 112.325756 107.585767) (xy 112.393635 107.749644) + (xy 112.393635 107.749645) (xy 112.488347 107.89139) (xy 112.492186 107.897135) (xy 112.617615 108.022564) + (xy 112.765103 108.121113) (xy 112.928984 108.188994) (xy 113.102959 108.2236) (xy 113.10296 108.2236) + (xy 113.28034 108.2236) (xy 113.280341 108.2236) (xy 113.454316 108.188994) (xy 113.618197 108.121113) + (xy 113.765685 108.022564) (xy 113.891114 107.897135) (xy 113.989663 107.749647) (xy 114.057544 107.585766) + (xy 114.09215 107.411791) (xy 114.09215 107.234409) (xy 114.057544 107.060434) (xy 113.989664 106.896555) + (xy 113.989664 106.896554) (xy 113.891114 106.749065) (xy 113.765684 106.623635) (xy 113.618194 106.525085) + (xy 113.564141 106.502696) (xy 113.517615 106.46296) (xy 113.503331 106.403465) (xy 113.526746 106.346937) + (xy 113.532011 106.34124) (xy 113.552139 106.321113) (xy 113.568632 106.292546) (xy 113.611447 106.21839) + (xy 113.611447 106.218388) (xy 113.611449 106.218386) (xy 113.64215 106.103809) (xy 113.64215 105.985191) + (xy 113.611449 105.870614) (xy 113.567678 105.794801) (xy 113.554956 105.734952) (xy 113.579842 105.679057) + (xy 113.63283 105.648464) (xy 113.653414 105.6463) (xy 115.315841 105.6463) (xy 115.374032 105.665207) + (xy 115.385838 105.67529) (xy 115.466837 105.756289) (xy 115.466839 105.75629) (xy 115.466841 105.756292) + (xy 115.56956 105.815597) (xy 115.569561 105.815597) (xy 115.569564 105.815599) (xy 115.684141 105.8463) + (xy 115.684143 105.8463) (xy 115.802757 105.8463) (xy 115.802759 105.8463) (xy 115.917336 105.815599) + (xy 115.917338 105.815597) (xy 115.91734 105.815597) (xy 116.020058 105.756292) (xy 116.020058 105.756291) + (xy 116.020063 105.756289) (xy 116.103939 105.672413) (xy 116.10412 105.6721) (xy 116.163247 105.56969) + (xy 116.163247 105.569688) (xy 116.163249 105.569686) (xy 116.19395 105.455109) (xy 116.19395 105.336491) + (xy 116.163249 105.221914) (xy 116.163247 105.221911) (xy 116.163247 105.221909) (xy 116.103942 105.119191) + (xy 116.10394 105.119189) (xy 116.103939 105.119187) (xy 116.020063 105.035311) (xy 116.02006 105.035309) + (xy 116.020058 105.035307) (xy 115.917339 104.976002) (xy 115.91734 104.976002) (xy 115.874757 104.964592) + (xy 115.802759 104.9453) (xy 115.684141 104.9453) (xy 115.614017 104.964089) (xy 115.569559 104.976002) + (xy 115.466841 105.035307) (xy 115.46684 105.035308) (xy 115.466837 105.03531) (xy 115.466837 105.035311) + (xy 115.385842 105.116305) (xy 115.331328 105.144081) (xy 115.315841 105.1453) (xy 104.569121 105.1453) + (xy 104.477053 105.183435) (xy 104.406585 105.253902) (xy 104.406586 105.253903) (xy 104.406585 105.253904) + (xy 102.991884 106.668604) (xy 102.937367 106.696381) (xy 102.92188 106.6976) (xy 102.45839 106.6976) + (xy 102.428301 106.701984) (xy 102.390254 106.707527) (xy 102.34993 106.727241) (xy 102.289348 106.735812) + (xy 102.235298 106.707136) (xy 102.208426 106.652168) (xy 102.20745 106.6383) (xy 102.20745 105.471807) + (xy 102.226357 105.413616) (xy 102.23644 105.401809) (xy 104.741114 102.897136) (xy 104.803302 102.804064) + (xy 104.839663 102.749647) (xy 104.868441 102.680171) (xy 104.907545 102.585766) (xy 104.94215 102.411792) + (xy 104.94215 102.234408) (xy 104.94215 98.687509) (xy 104.933916 98.646114) (xy 104.907545 98.513534) + (xy 104.847884 98.3695) (xy 104.839663 98.349653) (xy 104.757776 98.227101) (xy 104.741168 98.168213) + (xy 104.762346 98.11081) (xy 104.813219 98.076817) (xy 104.840092 98.0731) (xy 105.004149 98.0731) + (xy 105.00415 98.073099) (xy 105.00415 97.523101) (xy 105.004149 97.5231) (xy 104.103057 97.5231) + (xy 104.044866 97.504193) (xy 104.033053 97.494104) (xy 103.667457 97.128508) (xy 103.562049 97.0231) + (xy 104.019354 97.0231) (xy 105.004149 97.0231) (xy 105.00415 97.023099) (xy 105.00415 96.473101) + (xy 105.004149 96.4731) (xy 104.601013 96.4731) (xy 104.56416 96.475999) (xy 104.406449 96.521819) + (xy 104.406448 96.521819) (xy 104.265097 96.605414) (xy 104.148964 96.721547) (xy 104.065369 96.862898) + (xy 104.065369 96.862899) (xy 104.019551 97.020606) (xy 104.019549 97.020613) (xy 104.019354 97.0231) + (xy 103.562049 97.0231) (xy 103.447841 96.908892) (xy 102.314646 95.775696) (xy 102.286869 95.721179) + (xy 102.28565 95.705692) (xy 102.28565 95.583058) (xy 102.304557 95.524867) (xy 102.354057 95.488903) + (xy 102.415243 95.488903) (xy 102.464743 95.524867) (xy 102.480275 95.557432) (xy 102.494297 95.609759) + (xy 102.501352 95.63609) (xy 102.560657 95.738808) (xy 102.560659 95.73881) (xy 102.560661 95.738813) + (xy 102.644537 95.822689) (xy 102.644539 95.82269) (xy 102.644541 95.822692) (xy 102.74726 95.881997) + (xy 102.747261 95.881997) (xy 102.747264 95.881999) (xy 102.861841 95.9127) (xy 102.861843 95.9127) + (xy 102.980457 95.9127) (xy 102.980459 95.9127) (xy 103.095036 95.881999) (xy 103.095038 95.881997) + (xy 103.09504 95.881997) (xy 103.197758 95.822692) (xy 103.197758 95.822691) (xy 103.197763 95.822689) + (xy 103.278757 95.741694) (xy 103.333272 95.713919) (xy 103.348759 95.7127) (xy 104.390271 95.7127) + (xy 104.448462 95.731607) (xy 104.460274 95.741696) (xy 104.477788 95.759209) (xy 104.493885 95.775306) + (xy 104.596659 95.820685) (xy 104.621785 95.8236) (xy 105.886514 95.823599) (xy 105.911641 95.820685) + (xy 106.014415 95.775306) (xy 106.093856 95.695865) (xy 106.139235 95.593091) (xy 106.14215 95.567965) + (xy 106.142149 95.178236) (xy 106.139235 95.153109) (xy 106.11547 95.099288) (xy 106.109262 95.038419) + (xy 106.140018 94.985525) (xy 106.195989 94.960811) (xy 106.206035 94.9603) (xy 107.996042 94.9603) + (xy 108.054233 94.979207) (xy 108.066046 94.989296) (xy 108.634446 95.557696) (xy 108.662223 95.612213) + (xy 108.652652 95.672645) (xy 108.609387 95.71591) (xy 108.564442 95.7267) (xy 107.408842 95.7267) + (xy 107.370957 95.719164) (xy 107.318894 95.697599) (xy 107.193221 95.672601) (xy 107.193219 95.672601) + (xy 107.065081 95.672601) (xy 107.065078 95.672601) (xy 106.939406 95.697599) (xy 106.939404 95.697599) + (xy 106.821025 95.746633) (xy 106.71448 95.817823) (xy 106.688698 95.843605) (xy 106.634181 95.871381) + (xy 106.618697 95.8726) (xy 106.496788 95.8726) (xy 106.496785 95.872601) (xy 106.471659 95.875514) + (xy 106.368885 95.920894) (xy 106.289444 96.000335) (xy 106.244064 96.103111) (xy 106.24115 96.12823) + (xy 106.24115 96.431386) (xy 106.222243 96.489577) (xy 106.172743 96.525541) (xy 106.111557 96.525541) + (xy 106.102841 96.522248) (xy 106.101847 96.521818) (xy 105.944139 96.475999) (xy 105.907287 96.4731) + (xy 105.504151 96.4731) (xy 105.50415 96.473101) (xy 105.50415 98.073099) (xy 105.504151 98.0731) + (xy 105.907287 98.0731) (xy 105.944139 98.0702) (xy 106.101846 98.024382) (xy 106.10385 98.023197) + (xy 106.105374 98.022856) (xy 106.107568 98.021907) (xy 106.107748 98.022325) (xy 106.163561 98.009847) + (xy 106.219716 98.034143) (xy 106.250865 98.086806) (xy 106.25325 98.108408) (xy 106.25325 101.677324) + (xy 106.234343 101.735515) (xy 106.184843 101.771479) (xy 106.123657 101.771479) (xy 106.105574 101.762359) + (xy 106.105503 101.762505) (xy 105.993045 101.707527) (xy 105.958053 101.702429) (xy 105.92491 101.6976) + (xy 105.45839 101.6976) (xy 105.425247 101.702429) (xy 105.390254 101.707527) (xy 105.285168 101.758901) + (xy 105.202451 101.841618) (xy 105.151077 101.946704) (xy 105.148366 101.965314) (xy 105.14115 102.01484) + (xy 105.14115 102.63136) (xy 105.143215 102.645531) (xy 105.151077 102.699495) (xy 105.192345 102.783909) + (xy 105.202452 102.804583) (xy 105.285167 102.887298) (xy 105.323769 102.906169) (xy 105.390254 102.938672) + (xy 105.390255 102.938672) (xy 105.390257 102.938673) (xy 105.45839 102.9486) (xy 105.458393 102.9486) + (xy 105.924907 102.9486) (xy 105.92491 102.9486) (xy 105.993043 102.938673) (xy 106.098133 102.887298) + (xy 106.180848 102.804583) (xy 106.232223 102.699493) (xy 106.233745 102.689047) (xy 106.238222 102.658325) + (xy 106.265322 102.603469) (xy 106.31949 102.575018) (xy 106.336187 102.5736) (xy 106.453922 102.5736) + (xy 106.897113 102.5736) (xy 106.955304 102.592507) (xy 106.991268 102.642007) (xy 106.995078 102.658325) + (xy 107.001076 102.699492) (xy 107.036817 102.772601) (xy 107.052452 102.804583) (xy 107.135167 102.887298) + (xy 107.173769 102.906169) (xy 107.240254 102.938672) (xy 107.240255 102.938672) (xy 107.240257 102.938673) + (xy 107.30839 102.9486) (xy 107.308393 102.9486) (xy 107.774907 102.9486) (xy 107.77491 102.9486) + (xy 107.843043 102.938673) (xy 107.948133 102.887298) (xy 108.030848 102.804583) (xy 108.082223 102.699493) + (xy 108.09215 102.63136) (xy 108.09215 102.573101) (xy 108.291651 102.573101) (xy 108.291651 102.654682) + (xy 108.298058 102.725203) (xy 108.29806 102.725209) (xy 108.348629 102.887492) (xy 108.348632 102.8875) + (xy 108.436574 103.032972) (xy 108.556777 103.153175) (xy 108.702249 103.241117) (xy 108.702257 103.24112) + (xy 108.864539 103.291689) (xy 108.864545 103.291691) (xy 108.935075 103.298098) (xy 108.94165 103.298098) + (xy 108.94165 102.573101) (xy 109.44165 102.573101) (xy 109.44165 103.298098) (xy 109.441651 103.298099) + (xy 109.448216 103.298099) (xy 109.448232 103.298098) (xy 109.518753 103.291691) (xy 109.518759 103.291689) + (xy 109.681042 103.24112) (xy 109.68105 103.241117) (xy 109.826522 103.153175) (xy 109.946725 103.032972) + (xy 110.034667 102.8875) (xy 110.03467 102.887492) (xy 110.085239 102.72521) (xy 110.085241 102.725204) + (xy 110.091649 102.654681) (xy 110.09165 102.654668) (xy 110.09165 102.573101) (xy 110.091649 102.5731) + (xy 109.441651 102.5731) (xy 109.44165 102.573101) (xy 108.94165 102.573101) (xy 108.941649 102.5731) + (xy 108.291652 102.5731) (xy 108.291651 102.573101) (xy 108.09215 102.573101) (xy 108.09215 102.01484) + (xy 108.088752 101.991518) (xy 108.29165 101.991518) (xy 108.29165 102.073099) (xy 108.291651 102.0731) + (xy 108.941649 102.0731) (xy 108.94165 102.073099) (xy 108.94165 101.348101) (xy 109.44165 101.348101) + (xy 109.44165 102.073099) (xy 109.441651 102.0731) (xy 110.091648 102.0731) (xy 110.091649 102.073099) + (xy 110.091649 102.01484) (xy 110.99115 102.01484) (xy 110.99115 102.63136) (xy 110.993215 102.645531) + (xy 111.001077 102.699495) (xy 111.042345 102.783909) (xy 111.052452 102.804583) (xy 111.135167 102.887298) + (xy 111.173769 102.906169) (xy 111.240254 102.938672) (xy 111.240255 102.938672) (xy 111.240257 102.938673) + (xy 111.30839 102.9486) (xy 111.308393 102.9486) (xy 111.771882 102.9486) (xy 111.830073 102.967507) + (xy 111.841885 102.977596) (xy 111.978884 103.114594) (xy 112.119485 103.255195) (xy 112.119486 103.255197) + (xy 112.189953 103.325664) (xy 112.224773 103.340087) (xy 112.282023 103.363801) (xy 112.282024 103.363801) + (xy 112.393201 103.363801) (xy 112.393209 103.3638) (xy 113.474241 103.3638) (xy 113.532432 103.382707) + (xy 113.544238 103.39279) (xy 113.625237 103.473789) (xy 113.625239 103.47379) (xy 113.625241 103.473792) + (xy 113.72796 103.533097) (xy 113.727961 103.533097) (xy 113.727964 103.533099) (xy 113.842541 103.5638) + (xy 113.842543 103.5638) (xy 113.961157 103.5638) (xy 113.961159 103.5638) (xy 114.075736 103.533099) + (xy 114.075738 103.533097) (xy 114.07574 103.533097) (xy 114.178458 103.473792) (xy 114.178458 103.473791) + (xy 114.178463 103.473789) (xy 114.262339 103.389913) (xy 114.265721 103.384055) (xy 114.321647 103.28719) + (xy 114.321647 103.287188) (xy 114.321649 103.287186) (xy 114.35235 103.172609) (xy 114.35235 103.053991) + (xy 114.321649 102.939414) (xy 114.321647 102.939411) (xy 114.321647 102.939409) (xy 114.262342 102.836691) + (xy 114.26234 102.836689) (xy 114.262339 102.836687) (xy 114.178463 102.752811) (xy 114.172983 102.749647) + (xy 114.141149 102.731267) (xy 114.100209 102.685797) (xy 114.09165 102.645531) (xy 114.09165 102.573101) + (xy 114.091649 102.5731) (xy 113.441651 102.5731) (xy 113.44165 102.573101) (xy 113.44165 102.7638) + (xy 113.422743 102.821991) (xy 113.373243 102.857955) (xy 113.34265 102.8628) (xy 113.04065 102.8628) + (xy 112.982459 102.843893) (xy 112.946495 102.794393) (xy 112.94165 102.7638) (xy 112.94165 102.573101) + (xy 112.941649 102.5731) (xy 112.29165 102.5731) (xy 112.288782 102.575968) (xy 112.234265 102.603744) + (xy 112.173834 102.594172) (xy 112.148778 102.575967) (xy 112.121145 102.548334) (xy 112.093369 102.493817) + (xy 112.09215 102.478332) (xy 112.09215 102.014841) (xy 112.09215 102.01484) (xy 112.088752 101.991518) + (xy 112.29165 101.991518) (xy 112.29165 102.073099) (xy 112.291651 102.0731) (xy 112.941649 102.0731) + (xy 112.94165 102.073099) (xy 112.94165 101.348101) (xy 113.44165 101.348101) (xy 113.44165 102.073099) (xy 113.441651 102.0731) (xy 114.091648 102.0731) (xy 114.091649 102.073099) (xy 114.091649 101.991533) (xy 114.091648 101.991517) (xy 114.085241 101.920996) (xy 114.085239 101.92099) (xy 114.03467 101.758707) (xy 114.034667 101.758699) (xy 113.946725 101.613227) (xy 113.826522 101.493024) (xy 113.68105 101.405082) @@ -40588,745 +45261,1091 @@ (xy 113.441651 101.3481) (xy 113.44165 101.348101) (xy 112.94165 101.348101) (xy 112.941648 101.348099) (xy 112.935075 101.3481) (xy 112.864546 101.354508) (xy 112.86454 101.35451) (xy 112.702257 101.405079) (xy 112.702249 101.405082) (xy 112.556777 101.493024) (xy 112.436574 101.613227) (xy 112.348632 101.758699) - (xy 112.348628 101.758709) (xy 112.347956 101.760867) (xy 112.347137 101.762022) (xy 112.346173 101.764165) - (xy 112.345753 101.763976) (xy 112.312587 101.810793) (xy 112.254627 101.830396) (xy 112.196214 101.812186) - (xy 112.174189 101.790732) (xy 112.099199 101.690558) (xy 112.099198 101.690557) (xy 112.099196 101.690554) - (xy 112.099191 101.69055) (xy 111.983979 101.604302) (xy 111.849138 101.55401) (xy 111.849133 101.554009) - (xy 111.849131 101.554008) (xy 111.849127 101.554008) (xy 111.817899 101.55065) (xy 111.789523 101.5476) - (xy 111.78952 101.5476) (xy 111.293783 101.5476) (xy 111.293779 101.5476) (xy 111.293778 101.547601) - (xy 111.286599 101.548372) (xy 111.234169 101.554008) (xy 111.234164 101.554009) (xy 111.09932 101.604302) - (xy 110.984108 101.69055) (xy 110.9841 101.690558) (xy 110.897852 101.80577) (xy 110.84756 101.940611) - (xy 110.847558 101.940622) (xy 110.845211 101.962455) (xy 110.842087 101.991517) (xy 110.84115 102.000229) - (xy 110.091649 102.000229) (xy 110.091649 101.991533) (xy 110.091648 101.991517) (xy 110.085241 101.920996) - (xy 110.085239 101.92099) (xy 110.03467 101.758707) (xy 110.034667 101.758699) (xy 109.946725 101.613227) - (xy 109.826522 101.493024) (xy 109.68105 101.405082) (xy 109.681042 101.405079) (xy 109.51876 101.35451) - (xy 109.518754 101.354508) (xy 109.448231 101.3481) (xy 109.441651 101.3481) (xy 109.44165 101.348101) - (xy 108.94165 101.348101) (xy 108.941648 101.348099) (xy 108.935075 101.3481) (xy 108.864546 101.354508) - (xy 108.86454 101.35451) (xy 108.702257 101.405079) (xy 108.702249 101.405082) (xy 108.556777 101.493024) - (xy 108.436574 101.613227) (xy 108.348632 101.758699) (xy 108.348628 101.758709) (xy 108.347956 101.760867) - (xy 108.347137 101.762022) (xy 108.346173 101.764165) (xy 108.345753 101.763976) (xy 108.312587 101.810793) - (xy 108.254627 101.830396) (xy 108.196214 101.812186) (xy 108.174189 101.790732) (xy 108.099199 101.690558) - (xy 108.099198 101.690557) (xy 108.099196 101.690554) (xy 108.099191 101.69055) (xy 107.983979 101.604302) - (xy 107.849138 101.55401) (xy 107.849133 101.554009) (xy 107.849131 101.554008) (xy 107.849127 101.554008) - (xy 107.817899 101.55065) (xy 107.789523 101.5476) (xy 107.78952 101.5476) (xy 107.293783 101.5476) - (xy 107.293779 101.5476) (xy 107.293778 101.547601) (xy 107.286599 101.548372) (xy 107.234169 101.554008) - (xy 107.234164 101.554009) (xy 107.099322 101.604301) (xy 107.087399 101.613227) (xy 107.062577 101.631808) - (xy 107.004664 101.651544) (xy 106.946209 101.633469) (xy 106.909542 101.584488) (xy 106.90425 101.552554) - (xy 106.90425 97.726043) (xy 106.923157 97.667852) (xy 106.93324 97.656045) (xy 106.98427 97.605016) - (xy 107.063327 97.468084) (xy 107.10425 97.315357) (xy 107.10425 97.2767) (xy 107.123157 97.218509) - (xy 107.172657 97.182545) (xy 107.20325 97.1777) (xy 108.753191 97.1777) (xy 108.753192 97.1777) - (xy 108.907847 97.146937) (xy 109.053529 97.086594) (xy 109.184639 96.998989) (xy 109.296139 96.887489) - (xy 109.383744 96.756379) (xy 109.396533 96.725502) (xy 109.436267 96.678977) (xy 109.495762 96.664692) - (xy 109.55229 96.688105) (xy 109.558001 96.693383) (xy 110.754946 97.890328) (xy 110.767257 97.90533) - (xy 110.791863 97.942155) (xy 110.825673 97.992755) (xy 110.825676 97.992758) (xy 110.82568 97.992763) - (xy 110.899618 98.0667) (xy 110.971995 98.139077) (xy 111.144052 98.254041) (xy 111.33523 98.33323) - (xy 111.538185 98.3736) (xy 111.538186 98.3736) (xy 111.745114 98.3736) (xy 111.745115 98.3736) - (xy 111.94807 98.33323) (xy 112.139248 98.254041) (xy 112.311305 98.139077) (xy 112.33931 98.111071) - (xy 112.393824 98.083294) (xy 112.454257 98.092865) (xy 112.479317 98.111071) (xy 112.51392 98.145674) - (xy 112.658162 98.234645) (xy 112.819046 98.287956) (xy 112.918326 98.298099) (xy 112.94165 98.298098) - (xy 112.94165 97.573101) (xy 113.44165 97.573101) (xy 113.44165 98.298098) (xy 113.441651 98.298099) - (xy 113.464972 98.298099) (xy 113.564247 98.287957) (xy 113.564259 98.287954) (xy 113.725137 98.234645) - (xy 113.869379 98.145674) (xy 113.989224 98.025829) (xy 114.078195 97.881587) (xy 114.131506 97.720703) - (xy 114.14165 97.621423) (xy 114.14165 97.573101) (xy 114.141649 97.5731) (xy 113.441651 97.5731) - (xy 113.44165 97.573101) (xy 112.94165 97.573101) (xy 112.94165 97.4221) (xy 112.960557 97.363909) - (xy 113.010057 97.327945) (xy 113.04065 97.3231) (xy 113.191649 97.3231) (xy 113.19165 97.323099) - (xy 113.19165 97.1721) (xy 113.210557 97.113909) (xy 113.260057 97.077945) (xy 113.29065 97.0731) - (xy 114.141648 97.0731) (xy 114.141649 97.073099) (xy 114.141649 97.024777) (xy 114.131217 96.922661) - (xy 114.144112 96.86285) (xy 114.189701 96.822042) (xy 114.229704 96.8136) (xy 118.249064 96.8136) - (xy 118.307255 96.832507) (xy 118.319068 96.842596) (xy 118.601361 97.124889) (xy 118.732471 97.212494) - (xy 118.878153 97.272838) (xy 119.032808 97.3036) (xy 119.03281 97.3036) (xy 119.190491 97.3036) - (xy 119.190493 97.3036) (xy 119.345148 97.272838) (xy 119.490829 97.212494) (xy 119.62194 97.124889) - (xy 119.733439 97.01339) (xy 119.821044 96.882279) (xy 119.881388 96.736598) (xy 119.91215 96.581943) - (xy 119.91215 96.424258) (xy 119.902602 96.376257) (xy 119.904667 96.358806) (xy 119.90192 96.341453) - (xy 119.908173 96.32918) (xy 119.909793 96.315499) (xy 119.9297 96.286938) (xy 119.939047 96.277592) - (xy 119.993565 96.249817) (xy 120.009047 96.248599) (xy 120.188593 96.248599) (xy 120.188598 96.248599) - (xy 120.206524 96.245987) + (xy 112.348629 101.758707) (xy 112.29806 101.920989) (xy 112.298058 101.920995) (xy 112.29165 101.991518) + (xy 112.088752 101.991518) (xy 112.082223 101.946707) (xy 112.07143 101.92463) (xy 112.047678 101.876044) + (xy 112.030848 101.841617) (xy 111.948133 101.758902) (xy 111.947718 101.758699) (xy 111.843045 101.707527) + (xy 111.808053 101.702429) (xy 111.77491 101.6976) (xy 111.30839 101.6976) (xy 111.275247 101.702429) + (xy 111.240254 101.707527) (xy 111.135168 101.758901) (xy 111.052451 101.841618) (xy 111.001077 101.946704) + (xy 110.998366 101.965314) (xy 110.99115 102.01484) (xy 110.091649 102.01484) (xy 110.091649 101.991533) + (xy 110.091648 101.991517) (xy 110.085241 101.920996) (xy 110.085239 101.92099) (xy 110.03467 101.758707) + (xy 110.034667 101.758699) (xy 109.946725 101.613227) (xy 109.826522 101.493024) (xy 109.68105 101.405082) + (xy 109.681042 101.405079) (xy 109.51876 101.35451) (xy 109.518754 101.354508) (xy 109.448231 101.3481) + (xy 109.441651 101.3481) (xy 109.44165 101.348101) (xy 108.94165 101.348101) (xy 108.941648 101.348099) + (xy 108.935075 101.3481) (xy 108.864546 101.354508) (xy 108.86454 101.35451) (xy 108.702257 101.405079) + (xy 108.702249 101.405082) (xy 108.556777 101.493024) (xy 108.436574 101.613227) (xy 108.348632 101.758699) + (xy 108.348629 101.758707) (xy 108.29806 101.920989) (xy 108.298058 101.920995) (xy 108.29165 101.991518) + (xy 108.088752 101.991518) (xy 108.082223 101.946707) (xy 108.07143 101.92463) (xy 108.047678 101.876044) + (xy 108.030848 101.841617) (xy 107.948133 101.758902) (xy 107.947718 101.758699) (xy 107.843045 101.707527) + (xy 107.808053 101.702429) (xy 107.77491 101.6976) (xy 107.30839 101.6976) (xy 107.275247 101.702429) + (xy 107.240254 101.707527) (xy 107.135168 101.758901) (xy 107.052451 101.841618) (xy 107.001076 101.946707) + (xy 106.995078 101.987875) (xy 106.991268 101.995587) (xy 106.991268 102.004193) (xy 106.977984 102.022476) + (xy 106.967978 102.042731) (xy 106.960362 102.046731) (xy 106.955304 102.053693) (xy 106.933812 102.060675) + (xy 106.91381 102.071182) (xy 106.897113 102.0726) (xy 106.85325 102.0726) (xy 106.795059 102.053693) + (xy 106.759095 102.004193) (xy 106.75425 101.9736) (xy 106.75425 97.663909) (xy 106.773157 97.605718) + (xy 106.78324 97.593911) (xy 106.864239 97.512913) (xy 106.871028 97.501154) (xy 106.923547 97.41019) + (xy 106.923547 97.410188) (xy 106.923549 97.410186) (xy 106.95425 97.295609) (xy 106.95425 97.176991) + (xy 106.943915 97.13842) (xy 106.947116 97.077321) (xy 106.985621 97.02977) (xy 107.044721 97.013934) + (xy 107.058852 97.015699) (xy 107.119181 97.0277) (xy 107.119182 97.0277) (xy 108.738418 97.0277) + (xy 108.738419 97.0277) (xy 108.864094 97.002701) (xy 108.982477 96.953665) (xy 109.089019 96.882476) + (xy 109.179626 96.791869) (xy 109.250815 96.685327) (xy 109.299851 96.566944) (xy 109.320765 96.461803) + (xy 109.350661 96.408422) (xy 109.406226 96.382806) (xy 109.466235 96.394743) (xy 109.487866 96.411116) + (xy 110.871458 97.794707) (xy 110.883769 97.809709) (xy 110.934743 97.885997) (xy 110.942186 97.897135) + (xy 111.067615 98.022564) (xy 111.215103 98.121113) (xy 111.215104 98.121113) (xy 111.215105 98.121114) + (xy 111.247739 98.134631) (xy 111.378984 98.188994) (xy 111.552959 98.2236) (xy 111.55296 98.2236) + (xy 111.73034 98.2236) (xy 111.730341 98.2236) (xy 111.904316 98.188994) (xy 112.068197 98.121113) + (xy 112.215685 98.022564) (xy 112.23624 98.002008) (xy 112.290754 97.974231) (xy 112.351186 97.983801) + (xy 112.390502 98.020036) (xy 112.394076 98.02583) (xy 112.51392 98.145674) (xy 112.658162 98.234645) + (xy 112.819046 98.287956) (xy 112.918326 98.298099) (xy 112.94165 98.298098) (xy 112.94165 97.573101) + (xy 113.44165 97.573101) (xy 113.44165 98.298098) (xy 113.441651 98.298099) (xy 113.464972 98.298099) + (xy 113.564247 98.287957) (xy 113.564259 98.287954) (xy 113.725137 98.234645) (xy 113.869379 98.145674) + (xy 113.989224 98.025829) (xy 114.078195 97.881587) (xy 114.131506 97.720703) (xy 114.14165 97.621423) + (xy 114.14165 97.573101) (xy 114.141649 97.5731) (xy 113.441651 97.5731) (xy 113.44165 97.573101) + (xy 112.94165 97.573101) (xy 112.94165 97.4221) (xy 112.960557 97.363909) (xy 113.010057 97.327945) + (xy 113.04065 97.3231) (xy 113.191649 97.3231) (xy 113.19165 97.323099) (xy 113.19165 97.1721) (xy 113.210557 97.113909) + (xy 113.260057 97.077945) (xy 113.29065 97.0731) (xy 114.141648 97.0731) (xy 114.141649 97.073099) + (xy 114.141649 97.024777) (xy 114.131507 96.925502) (xy 114.131504 96.92549) (xy 114.087847 96.79374) + (xy 114.087491 96.732556) (xy 114.123166 96.682847) (xy 114.181246 96.663602) (xy 114.181822 96.6636) + (xy 118.311196 96.6636) (xy 118.369387 96.682507) (xy 118.381199 96.692596) (xy 118.696981 97.008377) + (xy 118.803519 97.079563) (xy 118.803521 97.079564) (xy 118.803524 97.079566) (xy 118.921907 97.128601) + (xy 119.047581 97.1536) (xy 119.047582 97.1536) (xy 119.175718 97.1536) (xy 119.175719 97.1536) + (xy 119.301394 97.128601) (xy 119.419777 97.079566) (xy 119.52632 97.008377) (xy 119.616927 96.91777) + (xy 119.688116 96.811227) (xy 119.737151 96.692844) (xy 119.76215 96.567169) (xy 119.76215 96.439031) + (xy 119.739842 96.326885) (xy 119.741907 96.309436) (xy 119.739159 96.292084) (xy 119.745413 96.279808) + (xy 119.747033 96.266126) (xy 119.766934 96.237572) (xy 119.876911 96.127596) (xy 119.931428 96.099819) + (xy 119.946914 96.0986) (xy 120.175129 96.0986) (xy 120.17513 96.0986) (xy 120.237259 96.086242) + (xy 120.307715 96.039165) (xy 120.354792 95.968709) (xy 120.36715 95.90658) (xy 120.36715 95.73962) + (xy 120.354792 95.677491) (xy 120.354792 95.67749) (xy 120.323968 95.63136) (xy 120.32179 95.6281) + (xy 120.315882 95.607153) (xy 120.306184 95.58767) (xy 120.308046 95.579368) (xy 120.305182 95.569214) + (xy 120.316321 95.52733) (xy 120.3188 95.522574) (xy 120.354792 95.468709) (xy 120.359669 95.444189) + (xy 120.366218 95.431629) (xy 120.378436 95.419637) (xy 120.3868 95.404702) (xy 120.406512 95.392083) + (xy 120.409886 95.388772) (xy 120.412229 95.388423) (xy 120.416118 95.385934) (xy 120.437828 95.376941) + (xy 120.555324 95.286784) (xy 120.555334 95.286774) (xy 120.645494 95.169275) (xy 120.645494 95.169274) + (xy 120.702171 95.032442) (xy 120.702172 95.032442) (xy 120.713276 94.9481) (xy 119.89065 94.9481) + (xy 119.875738 94.943255) (xy 119.860057 94.943255) (xy 119.847371 94.934038) (xy 119.832459 94.929193) + (xy 119.823242 94.916507) (xy 119.810557 94.907291) (xy 119.805711 94.892378) (xy 119.796495 94.879693) + (xy 119.79165 94.8491) (xy 119.79165 94.7971) (xy 119.810557 94.738909) (xy 119.860057 94.702945) + (xy 119.89065 94.6981) (xy 120.713276 94.6981) (xy 120.713276 94.698099) (xy 120.702171 94.613757) + (xy 120.645494 94.476925) (xy 120.645494 94.476924) (xy 120.555334 94.359425) (xy 120.555324 94.359415) + (xy 120.437828 94.269257) (xy 120.437826 94.269256) (xy 120.416117 94.260264) (xy 120.369591 94.220527) + (xy 120.366219 94.21457) (xy 120.359668 94.202005) (xy 120.354792 94.177491) (xy 120.318805 94.123632) + (xy 120.316322 94.11887) (xy 120.3121 94.093743) (xy 120.305182 94.069214) (xy 120.307025 94.063539) + (xy 120.306184 94.05853) (xy 120.313295 94.044242) (xy 120.321791 94.018098) (xy 120.326801 94.010601) + (xy 120.354792 93.968709) (xy 120.36715 93.90658) (xy 120.36715 93.73962) (xy 120.354792 93.677491) + (xy 120.354792 93.67749) (xy 120.335269 93.648273) (xy 120.32179 93.6281) (xy 120.305182 93.569214) + (xy 120.321791 93.518098) (xy 120.354792 93.468709) (xy 120.360716 93.438927) (xy 120.36715 93.40658) + (xy 120.36715 93.23962) (xy 120.358057 93.193904) (xy 120.354792 93.17749) (xy 120.335269 93.148273) + (xy 120.32179 93.1281) (xy 120.305182 93.069214) (xy 120.321791 93.018098) (xy 120.338354 92.993311) + (xy 120.354792 92.968709) (xy 120.36715 92.90658) (xy 120.36715 92.73962) (xy 120.354792 92.677491) + (xy 120.354792 92.67749) (xy 120.315922 92.619318) (xy 120.307715 92.607035) (xy 120.305891 92.605816) + (xy 120.237259 92.559957) (xy 120.175132 92.5476) (xy 120.17513 92.5476) (xy 119.946915 92.5476) + (xy 119.939317 92.545131) (xy 119.931428 92.546381) (xy 119.910772 92.535856) (xy 119.888724 92.528693) + (xy 119.876911 92.518604) (xy 119.863077 92.50477) (xy 119.8353 92.450253) (xy 119.844871 92.389821) + (xy 119.888136 92.346556) (xy 119.891595 92.344961) (xy 119.89299 92.344215) (xy 119.892997 92.344213) + (xy 119.931166 92.318709) (xy 120.007634 92.267615) (xy 120.007635 92.267614) (xy 120.007642 92.267609) + (xy 120.040486 92.245664) (xy 120.297146 91.989002) (xy 120.351663 91.961225) (xy 120.412095 91.970796) + (xy 120.45536 92.014061) (xy 120.46615 92.059006) (xy 120.46615 92.256582) (xy 120.478507 92.318709) + (xy 120.52474 92.387901) (xy 120.525585 92.389165) (xy 120.528252 92.390947) (xy 120.59604 92.436242) + (xy 120.616561 92.440323) (xy 120.65817 92.4486) (xy 120.658171 92.4486) (xy 120.825129 92.4486) + (xy 120.82513 92.4486) (xy 120.887259 92.436242) (xy 120.936649 92.40324) (xy 120.995536 92.386632) + (xy 121.04665 92.40324) (xy 121.066823 92.416719) (xy 121.09604 92.436242) (xy 121.116561 92.440323) + (xy 121.15817 92.4486) (xy 121.158171 92.4486) (xy 121.325129 92.4486) (xy 121.32513 92.4486) (xy 121.387259 92.436242) + (xy 121.436649 92.40324) (xy 121.495536 92.386632) (xy 121.54665 92.40324) (xy 121.566823 92.416719) + (xy 121.59604 92.436242) (xy 121.616561 92.440323) (xy 121.65817 92.4486) (xy 121.658171 92.4486) + (xy 121.825129 92.4486) (xy 121.82513 92.4486) (xy 121.887259 92.436242) (xy 121.936649 92.40324) + (xy 121.995536 92.386632) (xy 122.04665 92.40324) (xy 122.066823 92.416719) (xy 122.09604 92.436242) + (xy 122.116561 92.440323) (xy 122.15817 92.4486) (xy 122.158171 92.4486) (xy 122.325129 92.4486) + (xy 122.32513 92.4486) (xy 122.387259 92.436242) (xy 122.436649 92.40324) (xy 122.495536 92.386632) + (xy 122.54665 92.40324) (xy 122.566823 92.416719) (xy 122.59604 92.436242) (xy 122.616561 92.440323) + (xy 122.65817 92.4486) (xy 122.658171 92.4486) (xy 122.825129 92.4486) (xy 122.82513 92.4486) (xy 122.887259 92.436242) + (xy 122.957715 92.389165) (xy 123.004792 92.318709) (xy 123.01715 92.25658) (xy 123.01715 91.909469) + (xy 123.036057 91.851278) (xy 123.046146 91.839466) (xy 123.460437 91.425174) (xy 123.514954 91.397396) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 142.833702 85.552507) (xy 142.845515 85.562596) (xy 153.682154 96.399235) (xy 153.709931 96.453752) - (xy 153.71115 96.469239) (xy 153.71115 96.566305) (xy 153.692243 96.624496) (xy 153.642743 96.66046) - (xy 153.581557 96.66046) (xy 153.543657 96.633673) (xy 153.541658 96.635673) (xy 153.537071 96.631086) - (xy 153.53707 96.631084) (xy 153.425266 96.51928) (xy 153.288334 96.440223) (xy 153.135607 96.3993) - (xy 152.977493 96.3993) (xy 152.824766 96.440223) (xy 152.687834 96.51928) (xy 152.57603 96.631084) - (xy 152.496973 96.768016) (xy 152.45605 96.920743) (xy 152.45605 97.078857) (xy 152.496973 97.231584) - (xy 152.57603 97.368516) (xy 152.687834 97.48032) (xy 152.824766 97.559377) (xy 152.977493 97.6003) - (xy 152.977495 97.6003) (xy 153.135605 97.6003) (xy 153.135607 97.6003) (xy 153.288334 97.559377) - (xy 153.425266 97.48032) (xy 153.53707 97.368516) (xy 153.537071 97.368513) (xy 153.541658 97.363927) - (xy 153.543782 97.366051) (xy 153.583959 97.338393) (xy 153.645124 97.339947) (xy 153.693695 97.377156) - (xy 153.71115 97.433294) (xy 153.71115 106.2668) (xy 153.692243 106.324991) (xy 153.642743 106.360955) - (xy 153.61215 106.3658) (xy 128.073546 106.3658) (xy 128.015355 106.346893) (xy 127.979391 106.297393) - (xy 127.979391 106.236207) (xy 128.015355 106.186707) (xy 128.063485 106.168313) (xy 128.119337 106.162607) - (xy 128.119349 106.162604) (xy 128.285774 106.107456) (xy 128.43499 106.015419) (xy 128.558969 105.89144) - (xy 128.651006 105.742224) (xy 128.706156 105.575793) (xy 128.71665 105.473087) (xy 128.71665 104.573101) - (xy 128.716649 104.5731) (xy 126.566652 104.5731) (xy 126.566651 104.573101) (xy 126.566651 105.473086) - (xy 126.577142 105.575787) (xy 126.577145 105.575799) (xy 126.632293 105.742224) (xy 126.72433 105.89144) - (xy 126.848309 106.015419) (xy 126.997525 106.107456) (xy 127.163956 106.162606) (xy 127.219809 106.168313) - (xy 127.275777 106.193037) (xy 127.306523 106.245936) (xy 127.300305 106.306804) (xy 127.259496 106.352392) - (xy 127.209747 106.3658) (xy 122.573546 106.3658) (xy 122.515355 106.346893) (xy 122.479391 106.297393) - (xy 122.479391 106.236207) (xy 122.515355 106.186707) (xy 122.563485 106.168313) (xy 122.619337 106.162607) - (xy 122.619349 106.162604) (xy 122.785774 106.107456) (xy 122.93499 106.015419) (xy 123.058969 105.89144) - (xy 123.151006 105.742224) (xy 123.206156 105.575793) (xy 123.21665 105.473087) (xy 123.21665 104.573101) - (xy 123.216649 104.5731) (xy 121.066652 104.5731) (xy 121.066651 104.573101) (xy 121.066651 105.473086) - (xy 121.077142 105.575787) (xy 121.077145 105.575799) (xy 121.132293 105.742224) (xy 121.22433 105.89144) - (xy 121.348309 106.015419) (xy 121.497525 106.107456) (xy 121.663956 106.162606) (xy 121.719809 106.168313) - (xy 121.775777 106.193037) (xy 121.806523 106.245936) (xy 121.800305 106.306804) (xy 121.759496 106.352392) - (xy 121.709747 106.3658) (xy 119.62679 106.3658) (xy 119.568599 106.346893) (xy 119.556786 106.336804) - (xy 119.362586 106.142604) (xy 119.334809 106.088087) (xy 119.34438 106.027655) (xy 119.387645 105.98439) - (xy 119.43259 105.9736) (xy 119.55975 105.9736) (xy 119.559752 105.9736) (xy 119.648214 105.962977) - (xy 119.788992 105.907461) (xy 119.909572 105.816022) (xy 120.001011 105.695442) (xy 120.056527 105.554664) - (xy 120.06715 105.466202) (xy 120.06715 104.933702) (xy 120.083835 104.8787) (xy 120.109405 104.840432) - (xy 120.122591 104.820698) (xy 120.20178 104.62952) (xy 120.209656 104.58992) (xy 120.236748 104.539231) - (xy 120.897647 103.878333) (xy 120.952163 103.850557) (xy 121.012595 103.860128) (xy 121.05586 103.903393) - (xy 121.06665 103.948338) (xy 121.06665 104.073099) (xy 121.066651 104.0731) (xy 123.216648 104.0731) - (xy 123.216649 104.073099) (xy 123.216649 103.173113) (xy 123.213763 103.144861) (xy 123.226658 103.08505) - (xy 123.272247 103.044242) (xy 123.31225 103.0358) (xy 123.54215 103.0358) (xy 123.600341 103.054707) - (xy 123.636305 103.104207) (xy 123.64115 103.1348) (xy 123.64115 104.426567) (xy 123.681519 104.629518) - (xy 123.760708 104.820697) (xy 123.799465 104.8787) (xy 123.81615 104.933702) (xy 123.81615 105.466206) - (xy 123.826773 105.554665) (xy 123.882287 105.695439) (xy 123.882288 105.695441) (xy 123.882289 105.695442) - (xy 123.973728 105.816022) (xy 124.094308 105.907461) (xy 124.094309 105.907461) (xy 124.09431 105.907462) - (xy 124.141048 105.925893) (xy 124.235086 105.962977) (xy 124.323548 105.9736) (xy 124.32355 105.9736) - (xy 125.05975 105.9736) (xy 125.059752 105.9736) (xy 125.148214 105.962977) (xy 125.288992 105.907461) - (xy 125.409572 105.816022) (xy 125.501011 105.695442) (xy 125.556527 105.554664) (xy 125.56715 105.466202) - (xy 125.56715 104.933702) (xy 125.583835 104.8787) (xy 125.609405 104.840432) (xy 125.622591 104.820698) - (xy 125.70178 104.62952) (xy 125.74215 104.426565) (xy 125.74215 103.1348) (xy 125.761057 103.076609) - (xy 125.810557 103.040645) (xy 125.84115 103.0358) (xy 126.471049 103.0358) (xy 126.52924 103.054707) - (xy 126.565204 103.104207) (xy 126.569536 103.144861) (xy 126.56665 103.173111) (xy 126.56665 104.073099) - (xy 126.566651 104.0731) (xy 128.716648 104.0731) (xy 128.716649 104.073099) (xy 128.716649 103.777738) - (xy 128.723812 103.75569) (xy 128.727439 103.732793) (xy 128.733087 103.727144) (xy 128.735556 103.719547) - (xy 128.754312 103.705919) (xy 128.770704 103.689528) (xy 128.778593 103.688278) (xy 128.785056 103.683583) - (xy 128.808241 103.683583) (xy 128.831136 103.679957) (xy 128.838253 103.683583) (xy 128.846242 103.683583) - (xy 128.885653 103.707734) (xy 128.962154 103.784235) (xy 128.989931 103.838752) (xy 128.99115 103.854239) - (xy 128.99115 104.426567) (xy 129.031519 104.629518) (xy 129.110708 104.820697) (xy 129.225672 104.992754) - (xy 129.314828 105.081911) (xy 129.323707 105.092094) (xy 129.396693 105.188339) (xy 129.398728 105.191022) - (xy 129.519308 105.282461) (xy 129.519309 105.282461) (xy 129.51931 105.282462) (xy 129.543588 105.292036) - (xy 129.660086 105.337977) (xy 129.748548 105.3486) (xy 129.802749 105.3486) (xy 129.822063 105.350502) - (xy 129.938185 105.3736) (xy 129.938186 105.3736) (xy 130.145114 105.3736) (xy 130.145115 105.3736) - (xy 130.261237 105.350502) (xy 130.280551 105.3486) (xy 130.33475 105.3486) (xy 130.334752 105.3486) - (xy 130.423214 105.337977) (xy 130.563992 105.282461) (xy 130.684572 105.191022) (xy 130.759596 105.092086) - (xy 130.768463 105.081917) (xy 130.825571 105.02481) (xy 130.880087 104.997034) (xy 130.940519 105.006606) - (xy 130.983783 105.049871) (xy 130.989548 105.063674) (xy 131.007293 105.117225) (xy 131.09933 105.26644) - (xy 131.223309 105.390419) (xy 131.372525 105.482456) (xy 131.538956 105.537606) (xy 131.641663 105.548099) - (xy 131.69165 105.548098) (xy 131.69165 104.573101) (xy 132.19165 104.573101) (xy 132.19165 105.548098) - (xy 132.191651 105.548099) (xy 132.241636 105.548099) (xy 132.344337 105.537607) (xy 132.344349 105.537604) - (xy 132.510774 105.482456) (xy 132.65999 105.390419) (xy 132.783969 105.26644) (xy 132.876006 105.117224) - (xy 132.931156 104.950793) (xy 132.94165 104.848087) (xy 132.94165 104.573101) (xy 132.941649 104.5731) - (xy 132.191651 104.5731) (xy 132.19165 104.573101) (xy 131.69165 104.573101) (xy 131.69165 103.254739) - (xy 131.710557 103.196548) (xy 131.720646 103.184735) (xy 131.80728 103.098101) (xy 132.19165 103.098101) - (xy 132.19165 104.073099) (xy 132.191651 104.0731) (xy 132.947346 104.0731) (xy 132.990244 104.051241) - (xy 133.050676 104.060811) (xy 133.055233 104.063285) (xy 133.06083 104.066516) (xy 133.060834 104.06652) - (xy 133.197766 104.145577) (xy 133.350493 104.1865) (xy 133.36715 104.1865) (xy 133.425341 104.205407) - (xy 133.461305 104.254907) (xy 133.46615 104.2855) (xy 133.46615 104.645966) (xy 133.466151 104.64597) - (xy 133.472558 104.70558) (xy 133.472559 104.705585) (xy 133.522852 104.840429) (xy 133.6091 104.955641) - (xy 133.609104 104.955646) (xy 133.609107 104.955648) (xy 133.609108 104.955649) (xy 133.72432 105.041897) - (xy 133.859161 105.092189) (xy 133.859162 105.092189) (xy 133.859167 105.092191) (xy 133.918777 105.0986) - (xy 134.414522 105.098599) (xy 134.474133 105.092191) (xy 134.550591 105.063674) (xy 134.608979 105.041897) - (xy 134.608979 105.041896) (xy 134.608981 105.041896) (xy 134.724196 104.955646) (xy 134.810446 104.840431) - (xy 134.810645 104.839899) (xy 134.854021 104.7236) (xy 134.860741 104.705583) (xy 134.86715 104.645973) - (xy 134.867149 104.000228) (xy 134.860741 103.940617) (xy 134.854021 103.9226) (xy 134.810447 103.80577) - (xy 134.724199 103.690558) (xy 134.724198 103.690557) (xy 134.724196 103.690554) (xy 134.724191 103.69055) - (xy 134.608979 103.604302) (xy 134.474138 103.55401) (xy 134.474133 103.554009) (xy 134.474131 103.554008) - (xy 134.474127 103.554008) (xy 134.442899 103.55065) (xy 134.414523 103.5476) (xy 134.41452 103.5476) - (xy 134.116909 103.5476) (xy 134.058718 103.528693) (xy 134.022754 103.479193) (xy 134.021289 103.474248) - (xy 133.989127 103.354216) (xy 133.91007 103.217284) (xy 133.798266 103.10548) (xy 133.661334 103.026423) - (xy 133.508607 102.9855) (xy 133.350493 102.9855) (xy 133.203931 103.024771) (xy 133.197766 103.026423) - (xy 133.060834 103.10548) (xy 132.949028 103.217286) (xy 132.893653 103.313199) (xy 132.848184 103.35414) - (xy 132.787334 103.360536) (xy 132.737913 103.333703) (xy 132.65999 103.25578) (xy 132.510774 103.163743) - (xy 132.344343 103.108593) (xy 132.241637 103.0981) (xy 132.191651 103.0981) (xy 132.19165 103.098101) - (xy 131.80728 103.098101) (xy 131.820331 103.08505) (xy 132.533086 102.372296) (xy 132.587603 102.344519) - (xy 132.60309 102.3433) (xy 138.725414 102.3433) (xy 138.725415 102.3433) (xy 138.92837 102.30293) - (xy 139.119548 102.223741) (xy 139.125693 102.219635) (xy 139.291605 102.108777) (xy 139.437927 101.962455) - (xy 139.437929 101.962451) (xy 140.361626 101.038755) (xy 140.401427 100.979186) (xy 140.426112 100.953693) - (xy 140.427393 100.952775) (xy 140.488305 100.912077) (xy 140.49854 100.901841) (xy 140.505161 100.897102) - (xy 140.52694 100.890193) (xy 140.547302 100.879819) (xy 140.562789 100.8786) (xy 140.641655 100.8786) - (xy 140.655744 100.877948) (xy 140.669838 100.877297) (xy 140.736887 100.858219) (xy 140.79803 100.860479) - (xy 140.803962 100.862871) (xy 140.821659 100.870685) (xy 140.846785 100.8736) (xy 141.936514 100.873599) - (xy 141.961641 100.870685) (xy 142.064415 100.825306) (xy 142.143856 100.745865) (xy 142.189235 100.643091) - (xy 142.19215 100.617965) (xy 142.192149 99.028236) (xy 142.191543 99.023011) (xy 142.203621 98.96303) - (xy 142.219882 98.941603) (xy 142.22327 98.938216) (xy 142.302327 98.801284) (xy 142.34325 98.648557) - (xy 142.34325 98.490443) (xy 142.302327 98.337716) (xy 142.22327 98.200784) (xy 142.111466 98.08898) - (xy 142.109994 98.08813) (xy 142.109178 98.087224) (xy 142.10632 98.085031) (xy 142.106726 98.084501) - (xy 142.069053 98.042661) (xy 142.062657 97.981811) (xy 142.089491 97.93239) (xy 142.226513 97.795369) - (xy 142.417386 97.604496) (xy 142.471902 97.576719) (xy 142.487389 97.5755) (xy 142.795114 97.5755) - (xy 142.795115 97.5755) (xy 142.99807 97.53513) (xy 143.189248 97.455941) (xy 143.361305 97.340977) - (xy 143.507627 97.194655) (xy 143.622591 97.022598) (xy 143.697078 96.84277) (xy 143.736813 96.796246) - (xy 143.796308 96.781962) (xy 143.852836 96.805377) (xy 143.874277 96.831157) (xy 143.927107 96.922661) - (xy 143.93043 96.928416) (xy 143.981455 96.979441) (xy 144.009231 97.033956) (xy 144.01045 97.049443) - (xy 144.01045 99.340699) (xy 143.991543 99.39889) (xy 143.981454 99.410703) (xy 139.498553 103.893604) - (xy 139.444036 103.921381) (xy 139.428549 103.9226) (xy 136.572758 103.9226) (xy 136.514567 103.903693) - (xy 136.48 103.858198) (xy 136.460446 103.805769) (xy 136.458778 103.803541) (xy 136.374199 103.690558) - (xy 136.374198 103.690557) (xy 136.374196 103.690554) (xy 136.374191 103.69055) (xy 136.258979 103.604302) - (xy 136.124138 103.55401) (xy 136.124133 103.554009) (xy 136.124131 103.554008) (xy 136.124127 103.554008) - (xy 136.092899 103.55065) (xy 136.064523 103.5476) (xy 136.06452 103.5476) (xy 135.568783 103.5476) - (xy 135.568779 103.5476) (xy 135.568778 103.547601) (xy 135.561599 103.548372) (xy 135.509169 103.554008) - (xy 135.509164 103.554009) (xy 135.37432 103.604302) (xy 135.259108 103.69055) (xy 135.2591 103.690558) - (xy 135.172852 103.80577) (xy 135.12256 103.940611) (xy 135.122558 103.940622) (xy 135.11615 104.000229) - (xy 135.11615 104.645966) (xy 135.116151 104.64597) (xy 135.122558 104.70558) (xy 135.122559 104.705585) - (xy 135.172852 104.840429) (xy 135.2591 104.955641) (xy 135.259104 104.955646) (xy 135.259107 104.955648) - (xy 135.259108 104.955649) (xy 135.37432 105.041897) (xy 135.509161 105.092189) (xy 135.509162 105.092189) - (xy 135.509167 105.092191) (xy 135.568777 105.0986) (xy 136.064522 105.098599) (xy 136.124133 105.092191) - (xy 136.200591 105.063674) (xy 136.258979 105.041897) (xy 136.258979 105.041896) (xy 136.258981 105.041896) - (xy 136.374196 104.955646) (xy 136.460446 104.840431) (xy 136.48 104.788001) (xy 136.51805 104.740089) - (xy 136.572758 104.7236) (xy 139.688175 104.7236) (xy 139.688177 104.7236) (xy 139.790038 104.696307) - (xy 139.79004 104.696305) (xy 139.790042 104.696305) (xy 139.881358 104.643583) (xy 139.881358 104.643582) - (xy 139.881363 104.64358) (xy 144.73143 99.793513) (xy 144.784157 99.702188) (xy 144.81145 99.600327) - (xy 144.81145 99.494873) (xy 144.81145 97.049443) (xy 144.830357 96.991252) (xy 144.84044 96.979445) - (xy 144.89147 96.928416) (xy 144.970527 96.791484) (xy 145.01145 96.638757) (xy 145.01145 96.480643) - (xy 144.970527 96.327916) (xy 144.89147 96.190984) (xy 144.779666 96.07918) (xy 144.642734 96.000123) - (xy 144.490007 95.9592) (xy 144.331893 95.9592) (xy 144.214673 95.990609) (xy 144.179166 96.000123) - (xy 144.042234 96.07918) (xy 143.930429 96.190985) (xy 143.887805 96.264812) (xy 143.842335 96.305752) - (xy 143.781485 96.312147) (xy 143.728497 96.281554) (xy 143.704971 96.234623) (xy 143.702465 96.222024) - (xy 143.70178 96.21858) (xy 143.622591 96.027402) (xy 143.586642 95.9736) (xy 143.533734 95.894416) - (xy 143.51705 95.839415) (xy 143.51705 94.741805) (xy 143.517049 94.741802) (xy 143.516708 94.740089) - (xy 143.499052 94.651321) (xy 143.49715 94.632007) (xy 143.49715 94.507275) (xy 143.49715 94.507274) - (xy 143.48674 94.428203) (xy 143.452665 94.301036) (xy 143.446901 94.28712) (xy 143.422148 94.227361) - (xy 143.422146 94.227357) (xy 143.35632 94.113343) (xy 143.344301 94.09768) (xy 143.307775 94.050078) - (xy 143.307773 94.050076) (xy 143.30777 94.050072) (xy 143.214678 93.95698) (xy 143.214673 93.956976) - (xy 143.214671 93.956974) (xy 143.15141 93.908432) (xy 143.121764 93.891316) (xy 143.037393 93.842604) - (xy 143.037388 93.842601) (xy 142.963713 93.812084) (xy 142.894226 93.793465) (xy 142.836547 93.77801) - (xy 142.836542 93.778009) (xy 142.836541 93.778009) (xy 142.757477 93.7676) (xy 142.757476 93.7676) - (xy 142.14165 93.7676) (xy 142.141645 93.7676) (xy 142.11347 93.768902) (xy 142.113464 93.768902) - (xy 142.113462 93.768903) (xy 142.113459 93.768903) (xy 142.113458 93.768904) (xy 142.046409 93.787981) - (xy 141.985265 93.78572) (xy 141.979328 93.783324) (xy 141.961646 93.775516) (xy 141.961639 93.775514) - (xy 141.936518 93.7726) (xy 140.846789 93.7726) (xy 140.846786 93.772601) (xy 140.821659 93.775514) - (xy 140.718885 93.820894) (xy 140.639444 93.900335) (xy 140.594064 94.003111) (xy 140.59115 94.02823) - (xy 140.59115 95.468998) (xy 140.572243 95.527189) (xy 140.562154 95.539002) (xy 139.064453 97.036704) - (xy 139.009936 97.064481) (xy 138.994449 97.0657) (xy 138.625294 97.0657) (xy 138.567103 97.046793) - (xy 138.555291 97.036704) (xy 138.504268 96.985682) (xy 138.504266 96.98568) (xy 138.367334 96.906623) - (xy 138.214607 96.8657) (xy 138.056493 96.8657) (xy 137.903766 96.906623) (xy 137.766834 96.98568) - (xy 137.65503 97.097484) (xy 137.575973 97.234416) (xy 137.53505 97.387143) (xy 137.53505 97.545257) - (xy 137.575973 97.697984) (xy 137.65503 97.834916) (xy 137.766834 97.94672) (xy 137.903766 98.025777) - (xy 138.056493 98.0667) (xy 138.056495 98.0667) (xy 138.214605 98.0667) (xy 138.214607 98.0667) - (xy 138.367334 98.025777) (xy 138.504266 97.94672) (xy 138.539222 97.911764) (xy 138.555291 97.895696) - (xy 138.609808 97.867919) (xy 138.625294 97.8667) (xy 138.978181 97.8667) (xy 139.036372 97.885607) - (xy 139.072336 97.935107) (xy 139.072336 97.996293) (xy 139.060497 98.020699) (xy 139.050313 98.03594) - (xy 139.007108 98.100602) (xy 138.927919 98.291781) (xy 138.88755 98.494732) (xy 138.88755 99.306192) - (xy 138.880014 99.344077) (xy 138.80852 99.516678) (xy 138.788575 99.616947) (xy 138.761481 99.667635) - (xy 138.215815 100.213303) (xy 138.161298 100.241081) (xy 138.145811 100.2423) (xy 136.49115 100.2423) - (xy 136.432959 100.223393) (xy 136.396995 100.173893) (xy 136.39215 100.1433) (xy 136.392149 99.500233) - (xy 136.392149 99.500228) (xy 136.385741 99.440617) (xy 136.370178 99.39889) (xy 136.335447 99.30577) - (xy 136.249199 99.190558) (xy 136.249198 99.190557) (xy 136.249196 99.190554) (xy 136.238217 99.182335) - (xy 136.131821 99.102686) (xy 136.096568 99.052677) (xy 136.09215 99.023433) (xy 136.09215 97.538001) - (xy 136.111057 97.47981) (xy 136.121146 97.467997) (xy 140.479847 93.109296) (xy 140.534364 93.081519) - (xy 140.549851 93.0803) (xy 140.622005 93.0803) (xy 140.622007 93.0803) (xy 140.774734 93.039377) - (xy 140.911666 92.96032) (xy 141.02347 92.848516) (xy 141.102527 92.711584) (xy 141.14345 92.558857) - (xy 141.14345 92.400743) (xy 141.102527 92.248016) (xy 141.02347 92.111084) (xy 140.911666 91.99928) - (xy 140.911663 91.999278) (xy 140.911659 91.999274) (xy 140.90652 91.995331) (xy 140.907522 91.994024) - (xy 140.894071 91.979084) (xy 140.874185 91.959197) (xy 140.873761 91.956524) (xy 140.871951 91.954513) - (xy 140.869013 91.926542) (xy 140.864614 91.898765) (xy 140.865842 91.896353) (xy 140.86556 91.893663) - (xy 140.892391 91.84425) (xy 140.932346 91.804296) (xy 140.986863 91.776519) (xy 141.002349 91.7753) - (xy 141.444375 91.7753) (xy 141.444377 91.7753) (xy 141.546237 91.748007) (xy 141.637563 91.69528) - (xy 141.71213 91.620713) (xy 141.764857 91.529387) (xy 141.786939 91.446974) (xy 141.820262 91.395662) - (xy 141.877383 91.373735) (xy 141.882565 91.373599) (xy 141.936511 91.373599) (xy 141.936514 91.373599) - (xy 141.961641 91.370685) (xy 142.064415 91.325306) (xy 142.143856 91.245865) (xy 142.189235 91.143091) - (xy 142.19215 91.117965) (xy 142.192149 89.528236) (xy 142.189235 89.503109) (xy 142.143856 89.400335) - (xy 142.064415 89.320894) (xy 141.961641 89.275515) (xy 141.96164 89.275514) (xy 141.961638 89.275514) - (xy 141.936518 89.2726) (xy 140.846789 89.2726) (xy 140.846786 89.272601) (xy 140.82166 89.275514) - (xy 140.821657 89.275515) (xy 140.80875 89.281214) (xy 140.750576 89.287961) (xy 140.64165 89.2676) - (xy 140.025824 89.2676) (xy 140.025823 89.2676) (xy 139.994279 89.271753) (xy 139.981357 89.2726) - (xy 137.998832 89.2726) (xy 137.940641 89.253693) (xy 137.904677 89.204193) (xy 137.903205 89.147977) - (xy 137.92395 89.070557) (xy 137.92395 88.912443) (xy 137.883027 88.759716) (xy 137.80397 88.622784) - (xy 137.692166 88.51098) (xy 137.555234 88.431923) (xy 137.402507 88.391) (xy 137.244393 88.391) - (xy 137.091666 88.431923) (xy 136.954734 88.51098) (xy 136.84293 88.622784) (xy 136.763872 88.759717) - (xy 136.761564 88.768331) (xy 136.728236 88.819642) (xy 136.671112 88.841565) (xy 136.646625 88.839798) - (xy 136.533018 88.8172) (xy 136.533015 88.8172) (xy 134.847685 88.8172) (xy 134.847682 88.8172) - (xy 134.644731 88.857569) (xy 134.453552 88.936758) (xy 134.281495 89.051722) (xy 134.135172 89.198044) - (xy 134.135173 89.198045) (xy 133.222914 90.110304) (xy 133.168397 90.138081) (xy 133.15291 90.1393) - (xy 130.740089 90.1393) (xy 130.718042 90.132136) (xy 130.695146 90.128511) (xy 130.689496 90.122861) - (xy 130.681898 90.120393) (xy 130.668271 90.101637) (xy 130.65188 90.085247) (xy 130.65063 90.077356) - (xy 130.645934 90.070893) (xy 130.645934 90.047707) (xy 130.642308 90.024815) (xy 130.645934 90.017698) - (xy 130.645934 90.009707) (xy 130.670084 89.970298) (xy 130.707627 89.932755) (xy 130.707627 89.932753) - (xy 130.715777 89.924603) (xy 130.715776 89.924603) (xy 135.077786 85.562596) (xy 135.132303 85.534819) - (xy 135.14779 85.5336) (xy 142.775511 85.5336) + (xy 192.8308 114.133423) (xy 192.848971 114.134376) (xy 192.859182 114.142645) (xy 192.871684 114.146707) + (xy 192.882382 114.161431) (xy 192.896521 114.172881) (xy 192.899921 114.185572) (xy 192.907648 114.196207) + (xy 192.907648 114.214406) (xy 192.912357 114.231981) (xy 192.907648 114.244248) (xy 192.907648 114.257393) + (xy 192.89695 114.272117) (xy 192.89043 114.289103) (xy 192.879409 114.296259) (xy 192.871684 114.306893) + (xy 192.839118 114.322425) (xy 192.816768 114.328414) (xy 192.802259 114.332302) (xy 192.699541 114.391607) + (xy 192.615657 114.475491) (xy 192.556352 114.578209) (xy 192.554446 114.585322) (xy 192.52565 114.692791) + (xy 192.52565 114.811409) (xy 192.548409 114.896346) (xy 192.556352 114.92599) (xy 192.615657 115.028708) + (xy 192.615659 115.02871) (xy 192.615661 115.028713) (xy 192.699537 115.112589) (xy 192.699539 115.11259) + (xy 192.699541 115.112592) (xy 192.80226 115.171897) (xy 192.802258 115.171897) (xy 192.802262 115.171898) + (xy 192.802264 115.171899) (xy 192.839117 115.181773) (xy 192.89043 115.215097) (xy 192.912357 115.272219) + (xy 192.896521 115.331319) (xy 192.848971 115.369824) (xy 192.813493 115.3764) (xy 189.767013 115.3764) + (xy 189.708822 115.357493) (xy 189.672858 115.307993) (xy 189.672858 115.246807) (xy 189.673038 115.24626) + (xy 189.681506 115.220703) (xy 189.69165 115.121423) (xy 189.69165 115.073101) (xy 189.691649 115.0731) + (xy 188.84065 115.0731) (xy 188.782459 115.054193) (xy 188.746495 115.004693) (xy 188.74165 114.9741) + (xy 188.74165 114.6721) (xy 188.760557 114.613909) (xy 188.810057 114.577945) (xy 188.84065 114.5731) + (xy 189.691648 114.5731) (xy 189.691649 114.573099) (xy 189.691649 114.524777) (xy 189.681507 114.425502) + (xy 189.681504 114.42549) (xy 189.626383 114.259143) (xy 189.628807 114.258339) (xy 189.622615 114.207912) + (xy 189.652278 114.154397) (xy 189.70773 114.128538) (xy 189.719797 114.1278) (xy 192.813493 114.1278) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 131.614723 92.259207) (xy 131.650687 92.308707) (xy 131.650687 92.369893) (xy 131.647996 92.377185) - (xy 131.631722 92.416472) (xy 131.631719 92.416482) (xy 131.59135 92.619432) (xy 131.59135 95.003766) - (xy 131.572443 95.061957) (xy 131.522943 95.097921) (xy 131.482288 95.102253) (xy 131.441638 95.0981) - (xy 131.391651 95.0981) (xy 131.39165 95.098101) (xy 131.39165 97.548098) (xy 131.391651 97.548099) - (xy 131.441633 97.548099) (xy 131.482286 97.543945) (xy 131.542098 97.556839) (xy 131.582907 97.602427) - (xy 131.59135 97.642432) (xy 131.59135 100.334333) (xy 131.572443 100.392524) (xy 131.547352 100.416648) - (xy 131.457295 100.476822) (xy 130.111653 101.822464) (xy 130.057136 101.850241) (xy 129.996704 101.84067) - (xy 129.971648 101.822466) (xy 129.464828 101.315647) (xy 129.464827 101.315645) (xy 129.318505 101.169323) - (xy 129.161079 101.064135) (xy 129.146447 101.054358) (xy 128.955268 100.975169) (xy 128.752317 100.9348) - (xy 128.752315 100.9348) (xy 127.303989 100.9348) (xy 127.28194 100.927636) (xy 127.259045 100.92401) - (xy 127.253396 100.918361) (xy 127.245798 100.915893) (xy 127.232169 100.897135) (xy 127.21578 100.880746) - (xy 127.21453 100.872857) (xy 127.209834 100.866393) (xy 127.209834 100.843206) (xy 127.206208 100.820314) - (xy 127.209834 100.813197) (xy 127.209834 100.805207) (xy 127.233981 100.765801) (xy 127.318227 100.681555) - (xy 127.318228 100.681552) (xy 130.057627 97.942155) (xy 130.152011 97.8009) (xy 130.172588 97.770105) - (xy 130.172594 97.770093) (xy 130.180622 97.750712) (xy 130.25178 97.57892) (xy 130.276125 97.456527) - (xy 130.306022 97.403145) (xy 130.361587 97.377529) (xy 130.421597 97.389466) (xy 130.425196 97.391582) - (xy 130.572527 97.482457) (xy 130.738956 97.537606) (xy 130.841663 97.548099) (xy 130.89165 97.548098) - (xy 130.89165 95.098099) (xy 130.841665 95.0981) (xy 130.841662 95.098101) (xy 130.738962 95.108592) - (xy 130.73895 95.108595) (xy 130.572525 95.163743) (xy 130.423309 95.25578) (xy 130.29933 95.379759) - (xy 130.207292 95.528976) (xy 130.189547 95.582526) (xy 130.184986 95.588726) (xy 130.183782 95.59633) - (xy 130.167194 95.612917) (xy 130.153295 95.631815) (xy 130.14596 95.63415) (xy 130.140517 95.639594) - (xy 130.117346 95.643263) (xy 130.094995 95.650382) (xy 130.087688 95.64796) (xy 130.080085 95.649165) - (xy 130.059183 95.638514) (xy 130.036916 95.631136) (xy 130.025569 95.621387) (xy 129.968467 95.564284) - (xy 129.959587 95.5541) (xy 129.9357 95.5226) (xy 129.884572 95.455178) (xy 129.763992 95.363739) - (xy 129.763991 95.363738) (xy 129.763989 95.363737) (xy 129.623215 95.308223) (xy 129.534756 95.2976) - (xy 129.534752 95.2976) (xy 129.480551 95.2976) (xy 129.461237 95.295698) (xy 129.345117 95.2726) - (xy 129.345115 95.2726) (xy 129.138185 95.2726) (xy 129.138182 95.2726) (xy 129.022063 95.295698) - (xy 129.002749 95.2976) (xy 128.948543 95.2976) (xy 128.860084 95.308223) (xy 128.71931 95.363737) - (xy 128.719306 95.36374) (xy 128.598725 95.455179) (xy 128.523708 95.554104) (xy 128.514833 95.564284) - (xy 128.481853 95.597263) (xy 128.427338 95.625041) (xy 128.366906 95.61547) (xy 128.323641 95.572206) - (xy 128.316224 95.552887) (xy 128.307657 95.520913) (xy 128.297206 95.502811) (xy 128.297205 95.502809) - (xy 128.297205 95.502808) (xy 128.254933 95.429591) (xy 128.254931 95.429589) (xy 128.25493 95.429587) - (xy 128.180363 95.35502) (xy 128.18036 95.355018) (xy 128.176905 95.351562) (xy 128.176899 95.351557) - (xy 128.136846 95.311503) (xy 128.109069 95.256986) (xy 128.10785 95.2415) (xy 128.10785 95.169344) - (xy 128.107832 95.169275) (xy 128.066927 95.016616) (xy 127.98787 94.879684) (xy 127.876066 94.76788) - (xy 127.739134 94.688823) (xy 127.586407 94.6479) (xy 127.428293 94.6479) (xy 127.275566 94.688823) - (xy 127.138634 94.76788) (xy 127.02683 94.879684) (xy 126.947773 95.016616) (xy 126.90685 95.169343) - (xy 126.90685 95.327457) (xy 126.947773 95.480184) (xy 127.02683 95.617116) (xy 127.138634 95.72892) - (xy 127.275566 95.807977) (xy 127.428293 95.8489) (xy 127.43495 95.8489) (xy 127.493141 95.867807) - (xy 127.529105 95.917307) (xy 127.53395 95.9479) (xy 127.53395 96.159863) (xy 127.515043 96.218054) - (xy 127.465543 96.254018) (xy 127.409331 96.255491) (xy 127.400407 96.2531) (xy 127.242293 96.2531) - (xy 127.089566 96.294023) (xy 126.980727 96.356861) (xy 126.952631 96.373082) (xy 126.901609 96.424104) - (xy 126.847092 96.451881) (xy 126.831606 96.4531) (xy 125.396299 96.4531) (xy 125.338108 96.434193) - (xy 125.302144 96.384693) (xy 125.302144 96.323507) (xy 125.310562 96.3046) (xy 125.312168 96.301817) - (xy 125.31217 96.301816) (xy 125.391227 96.164884) (xy 125.43215 96.012157) (xy 125.43215 95.854043) - (xy 125.391227 95.701316) (xy 125.374414 95.672195) (xy 125.361694 95.61235) (xy 125.386581 95.556454) - (xy 125.410647 95.536965) (xy 125.520366 95.47362) (xy 125.63217 95.361816) (xy 125.711227 95.224884) - (xy 125.75215 95.072157) (xy 125.75215 94.914043) (xy 125.719633 94.792688) (xy 125.722835 94.731591) - (xy 125.76134 94.684041) (xy 125.765718 94.681358) (xy 125.900366 94.60362) (xy 126.01217 94.491816) - (xy 126.091227 94.354884) (xy 126.13215 94.202157) (xy 126.13215 94.044043) (xy 126.091227 93.891316) - (xy 126.080131 93.872097) (xy 126.067411 93.812251) (xy 126.092298 93.756356) (xy 126.145286 93.725763) - (xy 126.165869 93.7236) (xy 129.984375 93.7236) (xy 129.984377 93.7236) (xy 130.086238 93.696307) - (xy 130.08624 93.696305) (xy 130.086242 93.696305) (xy 130.177558 93.643583) (xy 130.177558 93.643582) - (xy 130.177563 93.64358) (xy 130.330538 93.490605) (xy 130.383948 93.437196) (xy 130.438464 93.409419) - (xy 130.453951 93.4082) (xy 130.526105 93.4082) (xy 130.526107 93.4082) (xy 130.678834 93.367277) - (xy 130.815766 93.28822) (xy 130.92757 93.176416) (xy 131.006627 93.039484) (xy 131.04755 92.886757) - (xy 131.04755 92.728643) (xy 131.006627 92.575916) (xy 130.92757 92.438984) (xy 130.897887 92.409301) - (xy 130.870112 92.354787) (xy 130.879683 92.294355) (xy 130.922948 92.25109) (xy 130.967893 92.2403) - (xy 131.556532 92.2403) + (xy 179.788868 101.785207) (xy 179.824832 101.834707) (xy 179.824832 101.895893) (xy 179.819618 101.90878) + (xy 179.801077 101.946704) (xy 179.798366 101.965314) (xy 179.79115 102.01484) (xy 179.79115 102.63136) + (xy 179.793215 102.645531) (xy 179.801077 102.699495) (xy 179.842345 102.783909) (xy 179.852452 102.804583) + (xy 179.935167 102.887298) (xy 179.973769 102.906169) (xy 180.040254 102.938672) (xy 180.040255 102.938672) + (xy 180.040257 102.938673) (xy 180.10839 102.9486) (xy 180.108393 102.9486) (xy 180.574907 102.9486) + (xy 180.57491 102.9486) (xy 180.643043 102.938673) (xy 180.748133 102.887298) (xy 180.830848 102.804583) + (xy 180.882223 102.699493) (xy 180.883745 102.689047) (xy 180.888222 102.658325) (xy 180.915322 102.603469) + (xy 180.96949 102.575018) (xy 180.986187 102.5736) (xy 188.242141 102.5736) (xy 188.300332 102.592507) + (xy 188.312138 102.60259) (xy 188.393137 102.683589) (xy 188.393139 102.68359) (xy 188.393141 102.683592) + (xy 188.49586 102.742897) (xy 188.495861 102.742897) (xy 188.495864 102.742899) (xy 188.610441 102.7736) + (xy 188.610443 102.7736) (xy 188.696828 102.7736) (xy 188.755019 102.792507) (xy 188.790983 102.842007) + (xy 188.790983 102.903193) (xy 188.790803 102.90374) (xy 188.752143 103.020406) (xy 188.74165 103.123112) + (xy 188.74165 103.573099) (xy 188.741651 103.5731) (xy 190.241649 103.5731) (xy 190.24165 103.573099) + (xy 190.24165 102.423101) (xy 190.74165 102.423101) (xy 190.74165 103.573099) (xy 190.741651 103.5731) + (xy 192.241648 103.5731) (xy 192.241649 103.573099) (xy 192.241649 103.123113) (xy 192.231157 103.020412) + (xy 192.231154 103.0204) (xy 192.176006 102.853975) (xy 192.083969 102.704759) (xy 191.95999 102.58078) + (xy 191.810774 102.488743) (xy 191.644343 102.433593) (xy 191.541637 102.4231) (xy 190.741651 102.4231) + (xy 190.74165 102.423101) (xy 190.24165 102.423101) (xy 190.241649 102.4231) (xy 189.441663 102.4231) + (xy 189.338962 102.433592) (xy 189.33895 102.433595) (xy 189.25039 102.462941) (xy 189.189205 102.463297) + (xy 189.139497 102.427622) (xy 189.120252 102.369542) (xy 189.12025 102.368966) (xy 189.12025 102.263792) + (xy 189.118975 102.259032) (xy 189.089549 102.149214) (xy 189.089547 102.149211) (xy 189.089547 102.149209) + (xy 189.030242 102.046491) (xy 189.03024 102.046489) (xy 189.030239 102.046487) (xy 188.946363 101.962611) + (xy 188.94636 101.962609) (xy 188.946358 101.962607) (xy 188.926316 101.951036) (xy 188.885375 101.905567) + (xy 188.878979 101.844716) (xy 188.909572 101.791728) (xy 188.965468 101.766842) (xy 188.975816 101.7663) + (xy 197.761928 101.7663) (xy 197.820119 101.785207) (xy 197.856083 101.834707) (xy 197.856083 101.895893) + (xy 197.850137 101.910246) (xy 197.831004 101.947795) (xy 197.81615 102.041577) (xy 197.81615 102.60462) + (xy 197.816151 102.604623) (xy 197.831002 102.698399) (xy 197.831004 102.698404) (xy 197.8886 102.811442) + (xy 197.978308 102.90115) (xy 198.091346 102.958746) (xy 198.185131 102.9736) (xy 198.593896 102.973599) + (xy 198.652087 102.992506) (xy 198.663899 103.002595) (xy 198.912653 103.251349) (xy 198.940431 103.305865) + (xy 198.94165 103.321352) (xy 198.94165 105.223098) (xy 198.941651 105.223099) (xy 199.216636 105.223099) + (xy 199.319337 105.212607) (xy 199.319349 105.212604) (xy 199.41411 105.181204) (xy 199.475294 105.180848) + (xy 199.525003 105.216523) (xy 199.544248 105.274603) (xy 199.54425 105.275179) (xy 199.54425 108.7931) + (xy 199.525343 108.851291) (xy 199.475843 108.887255) (xy 199.44525 108.8921) (xy 191.08938 108.8921) + (xy 190.963705 108.917099) (xy 190.942669 108.925813) (xy 190.942668 108.925813) (xy 190.845326 108.966132) + (xy 190.738784 109.03732) (xy 189.4229 110.353204) (xy 189.415782 110.35683) (xy 189.411087 110.363293) + (xy 189.389038 110.370456) (xy 189.368383 110.380981) (xy 189.352896 110.3822) (xy 189.342105 110.3822) + (xy 189.283914 110.363293) (xy 189.24795 110.313793) (xy 189.24795 110.252607) (xy 189.253164 110.239719) + (xy 189.281516 110.181725) (xy 189.29215 110.108736) (xy 189.29215 110.092893) (xy 189.299686 110.055007) + (xy 189.317151 110.012844) (xy 189.34215 109.887169) (xy 189.34215 107.551931) (xy 189.34215 105.959031) + (xy 189.317151 105.833356) (xy 189.268115 105.714973) (xy 189.196927 105.608431) (xy 187.921145 104.332649) + (xy 187.893368 104.278132) (xy 187.892149 104.262645) (xy 187.892149 104.073101) (xy 188.741651 104.073101) + (xy 188.741651 104.523086) (xy 188.752142 104.625787) (xy 188.752145 104.625799) (xy 188.807293 104.792224) + (xy 188.89933 104.94144) (xy 189.023309 105.065419) (xy 189.172525 105.157456) (xy 189.338956 105.212606) + (xy 189.441662 105.223099) (xy 190.241648 105.223099) (xy 190.24165 105.223098) (xy 190.24165 104.073101) + (xy 190.74165 104.073101) (xy 190.74165 105.223098) (xy 190.741651 105.223099) (xy 191.541636 105.223099) + (xy 191.644337 105.212607) (xy 191.644349 105.212604) (xy 191.810774 105.157456) (xy 191.95999 105.065419) + (xy 192.083969 104.94144) (xy 192.176006 104.792224) (xy 192.231156 104.625793) (xy 192.24165 104.523087) + (xy 192.24165 104.473101) (xy 197.466651 104.473101) (xy 197.466651 104.523086) (xy 197.477142 104.625787) + (xy 197.477145 104.625799) (xy 197.532293 104.792224) (xy 197.62433 104.94144) (xy 197.748309 105.065419) + (xy 197.897525 105.157456) (xy 198.063956 105.212606) (xy 198.166663 105.223099) (xy 198.441648 105.223099) + (xy 198.44165 105.223098) (xy 198.44165 104.473101) (xy 198.441649 104.4731) (xy 197.466652 104.4731) + (xy 197.466651 104.473101) (xy 192.24165 104.473101) (xy 192.24165 104.073101) (xy 192.241649 104.0731) + (xy 190.741651 104.0731) (xy 190.74165 104.073101) (xy 190.24165 104.073101) (xy 190.241649 104.0731) + (xy 188.741652 104.0731) (xy 188.741651 104.073101) (xy 187.892149 104.073101) (xy 187.892149 103.923112) + (xy 197.46665 103.923112) (xy 197.46665 103.973099) (xy 197.466651 103.9731) (xy 198.441649 103.9731) + (xy 198.44165 103.973099) (xy 198.44165 103.223101) (xy 198.441649 103.2231) (xy 198.166663 103.2231) + (xy 198.063962 103.233592) (xy 198.06395 103.233595) (xy 197.897525 103.288743) (xy 197.748309 103.38078) + (xy 197.62433 103.504759) (xy 197.532293 103.653975) (xy 197.477143 103.820406) (xy 197.46665 103.923112) + (xy 187.892149 103.923112) (xy 187.892149 103.141578) (xy 187.892148 103.141576) (xy 187.877297 103.0478) + (xy 187.877296 103.047798) (xy 187.877296 103.047796) (xy 187.8197 102.934758) (xy 187.729992 102.84505) + (xy 187.616954 102.787454) (xy 187.616955 102.787454) (xy 187.523171 102.7726) (xy 185.460128 102.7726) + (xy 185.460126 102.772601) (xy 185.36635 102.787452) (xy 185.366345 102.787454) (xy 185.253309 102.845049) + (xy 185.163599 102.934759) (xy 185.106004 103.047795) (xy 185.09115 103.141578) (xy 185.09115 104.504621) + (xy 185.091151 104.504623) (xy 185.106002 104.598399) (xy 185.106004 104.598404) (xy 185.1636 104.711442) + (xy 185.253308 104.80115) (xy 185.366346 104.858746) (xy 185.460131 104.8736) (xy 186.581195 104.873599) + (xy 186.639386 104.892506) (xy 186.651199 104.902595) (xy 188.012154 106.26355) (xy 188.039931 106.318067) + (xy 188.04115 106.333554) (xy 188.04115 109.887169) (xy 188.066149 110.012844) (xy 188.083614 110.055007) + (xy 188.088018 110.068186) (xy 188.09115 110.080338) (xy 188.09115 110.108736) (xy 188.101784 110.181725) + (xy 188.134553 110.248756) (xy 188.137063 110.258493) (xy 188.135761 110.279481) (xy 188.138707 110.300301) + (xy 188.133909 110.309343) (xy 188.133276 110.319562) (xy 188.119885 110.335777) (xy 188.110032 110.354351) + (xy 188.100835 110.358846) (xy 188.094317 110.366741) (xy 188.073955 110.371988) (xy 188.055064 110.381224) + (xy 188.041195 110.3822) (xy 187.792105 110.3822) (xy 187.733914 110.363293) (xy 187.69795 110.313793) + (xy 187.69795 110.252607) (xy 187.703164 110.239719) (xy 187.731516 110.181725) (xy 187.74215 110.108736) + (xy 187.74215 109.537464) (xy 187.731516 109.464475) (xy 187.676476 109.351889) (xy 187.587861 109.263274) + (xy 187.475275 109.208234) (xy 187.467933 109.205966) (xy 187.468446 109.204305) (xy 187.422009 109.181357) + (xy 187.393566 109.127184) (xy 187.39215 109.110501) (xy 187.39215 108.145109) (xy 187.411057 108.086918) + (xy 187.42114 108.075111) (xy 187.502139 107.994113) (xy 187.534148 107.938672) (xy 187.561447 107.89139) + (xy 187.561447 107.891388) (xy 187.561449 107.891386) (xy 187.59215 107.776809) (xy 187.59215 107.658191) + (xy 187.561449 107.543614) (xy 187.561447 107.543611) (xy 187.561447 107.543609) (xy 187.502142 107.440891) + (xy 187.50214 107.440889) (xy 187.502139 107.440887) (xy 187.418263 107.357011) (xy 187.41826 107.357009) + (xy 187.418258 107.357007) (xy 187.315539 107.297702) (xy 187.31554 107.297702) (xy 187.302001 107.294074) + (xy 187.200959 107.267) (xy 187.082341 107.267) (xy 187.012217 107.285789) (xy 186.967759 107.297702) + (xy 186.865041 107.357007) (xy 186.781157 107.440891) (xy 186.721852 107.543609) (xy 186.710556 107.585766) + (xy 186.69115 107.658191) (xy 186.69115 107.776809) (xy 186.709662 107.845897) (xy 186.721852 107.89139) + (xy 186.781157 107.994108) (xy 186.781159 107.99411) (xy 186.781161 107.994113) (xy 186.862155 108.075107) + (xy 186.889931 108.129622) (xy 186.89115 108.145109) (xy 186.89115 109.110501) (xy 186.872243 109.168692) + (xy 186.822743 109.204656) (xy 186.809893 109.207656) (xy 186.808024 109.208234) (xy 186.69544 109.263273) + (xy 186.606823 109.35189) (xy 186.551784 109.464473) (xy 186.551784 109.464475) (xy 186.542107 109.5309) + (xy 186.54115 109.537467) (xy 186.54115 110.078546) (xy 186.522243 110.136737) (xy 186.472743 110.172701) + (xy 186.411557 110.172701) (xy 186.372146 110.14855) (xy 183.065213 106.841617) (xy 179.757719 103.534123) + (xy 179.756186 103.533099) (xy 179.651174 103.462933) (xy 179.532795 103.413899) (xy 179.528307 103.413006) + (xy 179.52382 103.412114) (xy 179.481999 103.403795) (xy 179.421835 103.391827) (xy 179.368451 103.36193) + (xy 179.342836 103.306364) (xy 179.34215 103.294729) (xy 179.34215 102.259032) (xy 179.34215 102.259031) + (xy 179.317151 102.133356) (xy 179.268115 102.014973) (xy 179.268113 102.01497) (xy 179.268111 102.014966) + (xy 179.247359 101.983909) (xy 179.238571 101.967652) (xy 179.233556 101.955861) (xy 179.232223 101.946707) + (xy 179.212543 101.906451) (xy 179.21152 101.904045) (xy 179.20905 101.876044) (xy 179.205111 101.848198) + (xy 179.206383 101.845799) (xy 179.206145 101.843096) (xy 179.220607 101.818988) (xy 179.233786 101.794149) + (xy 179.236224 101.792956) (xy 179.237622 101.790628) (xy 179.263496 101.779624) (xy 179.288755 101.767276) + (xy 179.293281 101.766957) (xy 179.293927 101.766683) (xy 179.294689 101.766858) (xy 179.302623 101.7663) + (xy 179.730677 101.7663) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 104.393758 95.881607) (xy 104.394355 95.882045) (xy 104.453766 95.925892) (xy 104.453767 95.925892) - (xy 104.453768 95.925893) (xy 104.581951 95.970746) (xy 104.612375 95.973599) (xy 104.612377 95.9736) - (xy 104.612384 95.9736) (xy 105.895923 95.9736) (xy 105.895923 95.973599) (xy 105.926349 95.970746) - (xy 105.970271 95.955376) (xy 106.031437 95.954003) (xy 106.081733 95.988846) (xy 106.101942 96.046598) - (xy 106.096413 96.081514) (xy 106.094005 96.088396) (xy 106.094003 96.088405) (xy 106.09115 96.118825) - (xy 106.09115 96.386854) (xy 106.072243 96.445045) (xy 106.022743 96.481009) (xy 105.964533 96.481924) - (xy 105.944139 96.475999) (xy 105.907287 96.4731) (xy 105.504151 96.4731) (xy 105.50415 96.473101) - (xy 105.50415 98.073099) (xy 105.504151 98.0731) (xy 105.907287 98.0731) (xy 105.944136 98.0702) - (xy 105.976628 98.06076) (xy 106.037783 98.062681) (xy 106.08613 98.100181) (xy 106.10325 98.155829) - (xy 106.10325 101.454988) (xy 106.084343 101.513179) (xy 106.034843 101.549143) (xy 105.993668 101.553421) - (xy 105.962799 101.550102) (xy 105.939523 101.5476) (xy 105.93952 101.5476) (xy 105.443783 101.5476) - (xy 105.443779 101.5476) (xy 105.443778 101.547601) (xy 105.436599 101.548372) (xy 105.384169 101.554008) - (xy 105.384164 101.554009) (xy 105.249318 101.604303) (xy 105.243106 101.607696) (xy 105.242301 101.606223) - (xy 105.192558 101.623172) (xy 105.134104 101.605094) (xy 105.09744 101.556111) (xy 105.09215 101.524182) - (xy 105.09215 98.884566) (xy 105.092151 98.884545) (xy 105.092151 98.672736) (xy 105.09215 98.672732) - (xy 105.088812 98.655951) (xy 105.05178 98.469781) (xy 105.051778 98.469776) (xy 105.047992 98.460635) - (xy 105.04799 98.460633) (xy 105.021059 98.395614) (xy 104.972592 98.278601) (xy 104.97259 98.278599) - (xy 104.938181 98.227101) (xy 104.921572 98.168213) (xy 104.94275 98.11081) (xy 104.993623 98.076817) - (xy 105.001524 98.075724) (xy 105.00415 98.073099) (xy 105.00415 96.473101) (xy 105.004149 96.4731) - (xy 104.601013 96.4731) (xy 104.56416 96.475999) (xy 104.406449 96.521819) (xy 104.406448 96.521819) - (xy 104.265097 96.605414) (xy 104.148964 96.721547) (xy 104.065369 96.862898) (xy 104.065369 96.862899) - (xy 104.01955 97.020609) (xy 104.018315 97.0363) (xy 103.994899 97.092827) (xy 103.942729 97.124795) - (xy 103.881732 97.119993) (xy 103.849616 97.098534) (xy 102.974427 96.223346) (xy 102.94665 96.168829) - (xy 102.956221 96.108397) (xy 102.999486 96.065132) (xy 103.0188 96.057717) (xy 103.152934 96.021777) - (xy 103.289866 95.94272) (xy 103.315379 95.917206) (xy 103.340891 95.891696) (xy 103.395408 95.863919) - (xy 103.410894 95.8627) (xy 104.335567 95.8627) + (xy 142.895833 85.402507) (xy 142.907646 85.412596) (xy 153.832154 96.337104) (xy 153.859931 96.391621) + (xy 153.86115 96.407108) (xy 153.86115 106.4168) (xy 153.842243 106.474991) (xy 153.792743 106.510955) + (xy 153.76215 106.5158) (xy 119.564657 106.5158) (xy 119.506466 106.496893) (xy 119.494653 106.486804) + (xy 119.000452 105.992603) (xy 118.972675 105.938086) (xy 118.982246 105.877654) (xy 119.025511 105.834389) + (xy 119.070453 105.823599) (xy 119.548168 105.823599) (xy 119.548171 105.823599) (xy 119.548172 105.823598) + (xy 119.598695 105.815597) (xy 119.641949 105.808747) (xy 119.641949 105.808746) (xy 119.641954 105.808746) + (xy 119.754992 105.75115) (xy 119.8447 105.661442) (xy 119.902296 105.548404) (xy 119.91715 105.454619) + (xy 119.917149 104.8882) (xy 119.933834 104.833199) (xy 119.989663 104.749647) (xy 120.057544 104.585766) + (xy 120.060063 104.573101) (xy 121.066651 104.573101) (xy 121.066651 105.473086) (xy 121.077142 105.575787) + (xy 121.077145 105.575799) (xy 121.132293 105.742224) (xy 121.22433 105.89144) (xy 121.348309 106.015419) + (xy 121.497525 106.107456) (xy 121.663956 106.162606) (xy 121.766663 106.173099) (xy 121.89165 106.173099) + (xy 121.89165 104.573101) (xy 122.39165 104.573101) (xy 122.39165 106.173098) (xy 122.391651 106.173099) + (xy 122.516636 106.173099) (xy 122.619337 106.162607) (xy 122.619349 106.162604) (xy 122.785774 106.107456) + (xy 122.93499 106.015419) (xy 123.058969 105.89144) (xy 123.151006 105.742224) (xy 123.206156 105.575793) + (xy 123.21665 105.473087) (xy 123.21665 104.573101) (xy 123.216649 104.5731) (xy 122.391651 104.5731) + (xy 122.39165 104.573101) (xy 121.89165 104.573101) (xy 121.891649 104.5731) (xy 121.066652 104.5731) + (xy 121.066651 104.573101) (xy 120.060063 104.573101) (xy 120.071415 104.516029) (xy 120.077608 104.504443) + (xy 120.077608 104.5015) (xy 120.089919 104.481409) (xy 120.098507 104.465341) (xy 120.897647 103.666202) + (xy 120.952163 103.638426) (xy 121.012595 103.647997) (xy 121.05586 103.691262) (xy 121.06665 103.736207) + (xy 121.06665 104.073099) (xy 121.066651 104.0731) (xy 123.216648 104.0731) (xy 123.216649 104.073099) + (xy 123.216649 103.173113) (xy 123.206157 103.070412) (xy 123.206154 103.070401) (xy 123.188108 103.01594) + (xy 123.187752 102.954756) (xy 123.223427 102.905048) (xy 123.281506 102.885802) (xy 123.282083 102.8858) + (xy 123.69215 102.8858) (xy 123.750341 102.904707) (xy 123.786305 102.954207) (xy 123.79115 102.9848) + (xy 123.79115 104.411793) (xy 123.809957 104.506341) (xy 123.818708 104.550336) (xy 123.825756 104.585765) + (xy 123.825756 104.585767) (xy 123.893634 104.749642) (xy 123.89364 104.749653) (xy 123.949465 104.833199) + (xy 123.96615 104.888201) (xy 123.96615 105.45462) (xy 123.966151 105.454623) (xy 123.981002 105.548399) + (xy 123.981004 105.548404) (xy 124.0386 105.661442) (xy 124.128308 105.75115) (xy 124.241346 105.808746) + (xy 124.335131 105.8236) (xy 125.048168 105.823599) (xy 125.04817 105.823599) (xy 125.048171 105.823598) + (xy 125.098695 105.815597) (xy 125.141949 105.808747) (xy 125.141949 105.808746) (xy 125.141954 105.808746) + (xy 125.254992 105.75115) (xy 125.3447 105.661442) (xy 125.402296 105.548404) (xy 125.41715 105.454619) + (xy 125.417149 104.8882) (xy 125.433834 104.833199) (xy 125.489663 104.749647) (xy 125.557544 104.585766) + (xy 125.560063 104.573101) (xy 126.566651 104.573101) (xy 126.566651 105.473086) (xy 126.577142 105.575787) + (xy 126.577145 105.575799) (xy 126.632293 105.742224) (xy 126.72433 105.89144) (xy 126.848309 106.015419) + (xy 126.997525 106.107456) (xy 127.163956 106.162606) (xy 127.266663 106.173099) (xy 127.39165 106.173099) + (xy 127.39165 104.573101) (xy 127.89165 104.573101) (xy 127.89165 106.173098) (xy 127.891651 106.173099) + (xy 128.016636 106.173099) (xy 128.119337 106.162607) (xy 128.119349 106.162604) (xy 128.285774 106.107456) + (xy 128.43499 106.015419) (xy 128.558969 105.89144) (xy 128.651006 105.742224) (xy 128.706156 105.575793) + (xy 128.71665 105.473087) (xy 128.71665 104.573101) (xy 128.716649 104.5731) (xy 127.891651 104.5731) + (xy 127.89165 104.573101) (xy 127.39165 104.573101) (xy 127.391649 104.5731) (xy 126.566652 104.5731) + (xy 126.566651 104.573101) (xy 125.560063 104.573101) (xy 125.59215 104.411791) (xy 125.59215 102.9848) + (xy 125.611057 102.926609) (xy 125.660557 102.890645) (xy 125.69115 102.8858) (xy 126.501217 102.8858) + (xy 126.559408 102.904707) (xy 126.595372 102.954207) (xy 126.595372 103.015393) (xy 126.595192 103.01594) + (xy 126.577143 103.070406) (xy 126.56665 103.173112) (xy 126.56665 104.073099) (xy 126.566651 104.0731) + (xy 128.716648 104.0731) (xy 128.716649 104.073099) (xy 128.716649 103.565606) (xy 128.735556 103.507415) + (xy 128.785056 103.471451) (xy 128.846242 103.471451) (xy 128.885653 103.495602) (xy 129.112154 103.722103) + (xy 129.139931 103.77662) (xy 129.14115 103.792107) (xy 129.14115 104.411793) (xy 129.159957 104.506341) + (xy 129.168708 104.550336) (xy 129.175756 104.585765) (xy 129.175756 104.585767) (xy 129.243635 104.749644) + (xy 129.243635 104.749645) (xy 129.342185 104.897134) (xy 129.433925 104.988874) (xy 129.45213 105.013932) + (xy 129.463023 105.035311) (xy 129.4636 105.036442) (xy 129.553308 105.12615) (xy 129.666346 105.183746) + (xy 129.760131 105.1986) (xy 129.817521 105.198599) (xy 129.836836 105.2005) (xy 129.952959 105.2236) + (xy 129.95296 105.2236) (xy 130.13034 105.2236) (xy 130.130341 105.2236) (xy 130.246466 105.2005) + (xy 130.26578 105.198599) (xy 130.323171 105.198599) (xy 130.323172 105.198598) (xy 130.370061 105.191172) + (xy 130.416949 105.183747) (xy 130.416949 105.183746) (xy 130.416954 105.183746) (xy 130.529992 105.12615) + (xy 130.6197 105.036442) (xy 130.631171 105.013927) (xy 130.64558 104.992885) (xy 130.647412 104.990835) + (xy 130.741114 104.897135) (xy 130.770432 104.853256) (xy 130.775076 104.848064) (xy 130.795787 104.83601) + (xy 130.814609 104.821173) (xy 130.821767 104.820891) (xy 130.827958 104.817289) (xy 130.851799 104.819711) + (xy 130.875747 104.818771) (xy 130.881703 104.82275) (xy 130.88883 104.823475) (xy 130.906692 104.839447) + (xy 130.926621 104.852763) (xy 130.929479 104.859823) (xy 130.93444 104.864259) (xy 130.938065 104.88103) + (xy 130.947362 104.903992) (xy 130.952142 104.950788) (xy 130.952145 104.950799) (xy 131.007293 105.117224) + (xy 131.09933 105.26644) (xy 131.223309 105.390419) (xy 131.372525 105.482456) (xy 131.538956 105.537606) + (xy 131.641663 105.548099) (xy 131.69165 105.548098) (xy 131.69165 104.573101) (xy 132.19165 104.573101) + (xy 132.19165 105.548098) (xy 132.191651 105.548099) (xy 132.241636 105.548099) (xy 132.344337 105.537607) + (xy 132.344349 105.537604) (xy 132.510774 105.482456) (xy 132.65999 105.390419) (xy 132.783969 105.26644) + (xy 132.876006 105.117224) (xy 132.931156 104.950793) (xy 132.94165 104.848087) (xy 132.94165 104.573101) + (xy 132.941649 104.5731) (xy 132.191651 104.5731) (xy 132.19165 104.573101) (xy 131.69165 104.573101) + (xy 131.69165 103.098101) (xy 132.19165 103.098101) (xy 132.19165 104.073099) (xy 132.191651 104.0731) + (xy 132.941648 104.0731) (xy 132.941649 104.073099) (xy 132.941649 103.974208) (xy 132.960556 103.916017) + (xy 133.010056 103.880053) (xy 133.071242 103.880053) (xy 133.11065 103.904202) (xy 133.152937 103.946489) + (xy 133.152939 103.94649) (xy 133.152941 103.946492) (xy 133.25566 104.005797) (xy 133.255661 104.005797) + (xy 133.255664 104.005799) (xy 133.370241 104.0365) (xy 133.370243 104.0365) (xy 133.484782 104.0365) + (xy 133.492379 104.038968) (xy 133.500269 104.037719) (xy 133.520924 104.048243) (xy 133.542973 104.055407) + (xy 133.554786 104.065496) (xy 133.587154 104.097864) (xy 133.614931 104.152381) (xy 133.61615 104.167868) + (xy 133.61615 104.63136) (xy 133.61756 104.641037) (xy 133.626077 104.699495) (xy 133.67141 104.792224) + (xy 133.677452 104.804583) (xy 133.760167 104.887298) (xy 133.801334 104.907423) (xy 133.865254 104.938672) + (xy 133.865255 104.938672) (xy 133.865257 104.938673) (xy 133.93339 104.9486) (xy 133.933393 104.9486) + (xy 134.399907 104.9486) (xy 134.39991 104.9486) (xy 134.468043 104.938673) (xy 134.573133 104.887298) + (xy 134.655848 104.804583) (xy 134.707223 104.699493) (xy 134.71715 104.63136) (xy 134.71715 104.01484) + (xy 135.26615 104.01484) (xy 135.26615 104.63136) (xy 135.26756 104.641037) (xy 135.276077 104.699495) + (xy 135.32141 104.792224) (xy 135.327452 104.804583) (xy 135.410167 104.887298) (xy 135.451334 104.907423) + (xy 135.515254 104.938672) (xy 135.515255 104.938672) (xy 135.515257 104.938673) (xy 135.58339 104.9486) + (xy 135.583393 104.9486) (xy 136.049907 104.9486) (xy 136.04991 104.9486) (xy 136.118043 104.938673) + (xy 136.223133 104.887298) (xy 136.305848 104.804583) (xy 136.357223 104.699493) (xy 136.358621 104.689899) + (xy 136.363222 104.658325) (xy 136.390322 104.603469) (xy 136.44449 104.575018) (xy 136.461187 104.5736) + (xy 139.685279 104.5736) (xy 139.755107 104.544676) (xy 139.777347 104.535464) (xy 144.552845 99.759964) + (xy 144.552847 99.759964) (xy 144.623314 99.689497) (xy 144.66145 99.597428) (xy 144.66145 96.987309) + (xy 144.663918 96.979711) (xy 144.662669 96.971822) (xy 144.673193 96.951166) (xy 144.676662 96.940491) + (xy 152.60605 96.940491) (xy 152.60605 97.059109) (xy 152.630538 97.150499) (xy 152.636752 97.17369) + (xy 152.696057 97.276408) (xy 152.696059 97.27641) (xy 152.696061 97.276413) (xy 152.779937 97.360289) + (xy 152.779939 97.36029) (xy 152.779941 97.360292) (xy 152.88266 97.419597) (xy 152.882661 97.419597) + (xy 152.882664 97.419599) (xy 152.997241 97.4503) (xy 152.997243 97.4503) (xy 153.115857 97.4503) + (xy 153.115859 97.4503) (xy 153.230436 97.419599) (xy 153.230438 97.419597) (xy 153.23044 97.419597) + (xy 153.333158 97.360292) (xy 153.333158 97.360291) (xy 153.333163 97.360289) (xy 153.417039 97.276413) + (xy 153.41924 97.272601) (xy 153.476347 97.17369) (xy 153.476347 97.173688) (xy 153.476349 97.173686) + (xy 153.50705 97.059109) (xy 153.50705 96.940491) (xy 153.476349 96.825914) (xy 153.476347 96.825911) + (xy 153.476347 96.825909) (xy 153.417042 96.723191) (xy 153.41704 96.723189) (xy 153.417039 96.723187) + (xy 153.333163 96.639311) (xy 153.33316 96.639309) (xy 153.333158 96.639307) (xy 153.230439 96.580002) + (xy 153.23044 96.580002) (xy 153.208428 96.574104) (xy 153.115859 96.5493) (xy 152.997241 96.5493) + (xy 152.931404 96.566941) (xy 152.882659 96.580002) (xy 152.779941 96.639307) (xy 152.696057 96.723191) + (xy 152.636752 96.825909) (xy 152.629799 96.85186) (xy 152.60605 96.940491) (xy 144.676662 96.940491) + (xy 144.680357 96.929118) (xy 144.69044 96.917311) (xy 144.771439 96.836313) (xy 144.773275 96.833133) + (xy 144.830747 96.73359) (xy 144.830747 96.733588) (xy 144.830749 96.733586) (xy 144.86145 96.619009) + (xy 144.86145 96.500391) (xy 144.830749 96.385814) (xy 144.830747 96.385811) (xy 144.830747 96.385809) + (xy 144.771442 96.283091) (xy 144.77144 96.283089) (xy 144.771439 96.283087) (xy 144.687563 96.199211) + (xy 144.68756 96.199209) (xy 144.687558 96.199207) (xy 144.584839 96.139902) (xy 144.58484 96.139902) + (xy 144.538913 96.127596) (xy 144.470259 96.1092) (xy 144.351641 96.1092) (xy 144.303614 96.122069) + (xy 144.237059 96.139902) (xy 144.134341 96.199207) (xy 144.050457 96.283091) (xy 143.991152 96.385809) + (xy 143.97726 96.437655) (xy 143.96045 96.500391) (xy 143.96045 96.619009) (xy 143.982769 96.702305) + (xy 143.991152 96.73359) (xy 144.050457 96.836308) (xy 144.050459 96.83631) (xy 144.050461 96.836313) + (xy 144.131455 96.917307) (xy 144.159231 96.971822) (xy 144.16045 96.987309) (xy 144.16045 99.402831) + (xy 144.141543 99.461022) (xy 144.131454 99.472835) (xy 139.560685 104.043604) (xy 139.506168 104.071381) + (xy 139.490681 104.0726) (xy 136.461187 104.0726) (xy 136.402996 104.053693) (xy 136.367032 104.004193) + (xy 136.363222 103.987875) (xy 136.357223 103.946707) (xy 136.331591 103.894276) (xy 136.305848 103.841617) + (xy 136.223133 103.758902) (xy 136.207172 103.751099) (xy 136.118045 103.707527) (xy 136.083053 103.702429) + (xy 136.04991 103.6976) (xy 135.58339 103.6976) (xy 135.550247 103.702429) (xy 135.515254 103.707527) + (xy 135.410168 103.758901) (xy 135.327451 103.841618) (xy 135.276077 103.946704) (xy 135.27207 103.974208) + (xy 135.26615 104.01484) (xy 134.71715 104.01484) (xy 134.707223 103.946707) (xy 134.707116 103.946489) + (xy 134.681591 103.894276) (xy 134.655848 103.841617) (xy 134.573133 103.758902) (xy 134.557172 103.751099) + (xy 134.468045 103.707527) (xy 134.433053 103.702429) (xy 134.39991 103.6976) (xy 133.97905 103.6976) + (xy 133.920859 103.678693) (xy 133.884895 103.629193) (xy 133.88005 103.5986) (xy 133.88005 103.526692) + (xy 133.871907 103.496301) (xy 133.849349 103.412114) (xy 133.849347 103.412111) (xy 133.849347 103.412109) + (xy 133.790042 103.309391) (xy 133.79004 103.309389) (xy 133.790039 103.309387) (xy 133.706163 103.225511) + (xy 133.70616 103.225509) (xy 133.706158 103.225507) (xy 133.603439 103.166202) (xy 133.60344 103.166202) + (xy 133.589901 103.162574) (xy 133.488859 103.1355) (xy 133.370241 103.1355) (xy 133.300117 103.154289) + (xy 133.255659 103.166202) (xy 133.152941 103.225507) (xy 133.069057 103.309391) (xy 133.009752 103.41211) + (xy 133.009751 103.412111) (xy 133.006817 103.423063) (xy 132.973492 103.474376) (xy 132.916369 103.496301) + (xy 132.857269 103.480464) (xy 132.82693 103.44941) (xy 132.783967 103.379757) (xy 132.65999 103.25578) + (xy 132.510774 103.163743) (xy 132.344343 103.108593) (xy 132.241637 103.0981) (xy 132.191651 103.0981) + (xy 132.19165 103.098101) (xy 131.69165 103.098101) (xy 131.69165 103.077159) (xy 131.685626 103.065336) + (xy 131.685626 103.065332) (xy 131.685625 103.065329) (xy 131.690939 103.031791) (xy 131.695197 103.004904) + (xy 131.6952 103.004898) (xy 131.695204 103.004893) (xy 131.7134 102.979848) (xy 132.470953 102.222296) + (xy 132.52547 102.194519) (xy 132.540957 102.1933) (xy 138.71064 102.1933) (xy 138.710641 102.1933) + (xy 138.884616 102.158694) (xy 139.048497 102.090813) (xy 139.195985 101.992264) (xy 139.321414 101.866835) + (xy 139.419963 101.719347) (xy 139.487844 101.555466) (xy 139.52245 101.381491) (xy 139.52245 101.353254) + (xy 139.541357 101.295063) (xy 139.551446 101.28325) (xy 140.0771 100.757596) (xy 140.131617 100.729819) + (xy 140.147104 100.7286) (xy 140.641648 100.7286) (xy 140.64165 100.7286) (xy 140.7194 100.707767) + (xy 140.719401 100.707766) (xy 140.721286 100.706678) (xy 140.731819 100.704438) (xy 140.73199 100.704393) + (xy 140.731992 100.704401) (xy 140.781134 100.693955) (xy 140.825789 100.710097) (xy 140.832926 100.714866) + (xy 140.832927 100.714866) (xy 140.832928 100.714867) (xy 140.838825 100.71604) (xy 140.876822 100.723599) + (xy 140.876828 100.723599) (xy 140.87683 100.7236) (xy 140.876831 100.7236) (xy 141.906469 100.7236) + (xy 141.90647 100.7236) (xy 141.906471 100.723599) (xy 141.906477 100.723599) (xy 141.928273 100.719262) + (xy 141.950372 100.714867) (xy 142.000154 100.681604) (xy 142.033417 100.631822) (xy 142.04215 100.58792) + (xy 142.04215 99.05828) (xy 142.042149 99.058278) (xy 142.042149 99.058272) (xy 142.033417 99.014379) + (xy 142.029897 99.00588) (xy 142.025098 98.944883) (xy 142.051357 98.897994) (xy 142.103239 98.846113) + (xy 142.112762 98.829619) (xy 142.162547 98.74339) (xy 142.162547 98.743388) (xy 142.162549 98.743386) + (xy 142.19325 98.628809) (xy 142.19325 98.510191) (xy 142.162549 98.395614) (xy 142.162547 98.395611) + (xy 142.162547 98.395609) (xy 142.103242 98.292891) (xy 142.10324 98.292889) (xy 142.103239 98.292887) + (xy 142.019363 98.209011) (xy 142.01936 98.209009) (xy 142.019358 98.209007) (xy 141.916639 98.149702) + (xy 141.91664 98.149702) (xy 141.901607 98.145674) (xy 141.802059 98.119) (xy 141.683441 98.119) + (xy 141.625106 98.134631) (xy 141.568859 98.149702) (xy 141.466141 98.209007) (xy 141.382257 98.292891) + (xy 141.322952 98.395609) (xy 141.31288 98.433199) (xy 141.298788 98.485793) (xy 141.29522 98.499108) + (xy 141.261895 98.550423) (xy 141.254598 98.555798) (xy 141.249757 98.559032) (xy 141.179284 98.629505) + (xy 141.14115 98.721571) (xy 141.14115 98.8236) (xy 141.122243 98.881791) (xy 141.072743 98.917755) + (xy 141.04215 98.9226) (xy 140.876822 98.9226) (xy 140.832929 98.931332) (xy 140.832924 98.931334) + (xy 140.825786 98.936104) (xy 140.809221 98.940774) (xy 140.794617 98.949875) (xy 140.782842 98.948212) + (xy 140.766897 98.952709) (xy 140.733586 98.94553) (xy 140.721661 98.940694) (xy 140.7194 98.938433) + (xy 140.709622 98.935813) (xy 140.703948 98.933512) (xy 140.684988 98.917562) (xy 140.66421 98.904067) + (xy 140.661951 98.898182) (xy 140.657127 98.894124) (xy 140.651163 98.870076) (xy 140.642285 98.846945) + (xy 140.64215 98.841768) (xy 140.64215 98.618804) (xy 140.661057 98.560613) (xy 140.671146 98.5488) + (xy 142.01545 97.204496) (xy 142.069967 97.176719) (xy 142.085454 97.1755) (xy 142.755718 97.1755) + (xy 142.755719 97.1755) (xy 142.881394 97.150501) (xy 142.999777 97.101465) (xy 143.106319 97.030276) + (xy 143.196926 96.939669) (xy 143.268115 96.833127) (xy 143.317151 96.714744) (xy 143.34215 96.589069) + (xy 143.34215 95.183391) (xy 143.342997 95.170468) (xy 143.343455 95.16699) (xy 143.34715 95.138926) + (xy 143.34715 94.507274) (xy 143.341851 94.467027) (xy 143.307776 94.33986) (xy 143.292242 94.302357) + (xy 143.226416 94.188343) (xy 143.201704 94.156138) (xy 143.108612 94.063046) (xy 143.108607 94.063042) + (xy 143.108605 94.06304) (xy 143.07641 94.038336) (xy 143.076407 94.038334) (xy 142.962393 93.972508) + (xy 142.953219 93.968708) (xy 142.924896 93.956976) (xy 142.924892 93.956974) (xy 142.92489 93.956974) + (xy 142.797723 93.922899) (xy 142.797718 93.922898) (xy 142.797717 93.922898) (xy 142.757476 93.9176) + (xy 142.14165 93.9176) (xy 142.090398 93.931333) (xy 142.063892 93.938435) (xy 142.062002 93.939527) + (xy 142.051464 93.941765) (xy 142.051311 93.941807) (xy 142.051308 93.941798) (xy 142.002153 93.952243) + (xy 141.957511 93.936102) (xy 141.950376 93.931334) (xy 141.95037 93.931332) (xy 141.906477 93.9226) + (xy 141.90647 93.9226) (xy 140.87683 93.9226) (xy 140.876822 93.9226) (xy 140.832929 93.931332) + (xy 140.832925 93.931334) (xy 140.783148 93.964594) (xy 140.783144 93.964598) (xy 140.749884 94.014375) + (xy 140.749882 94.014379) (xy 140.74115 94.058272) (xy 140.74115 95.531131) (xy 140.722243 95.589322) + (xy 140.712154 95.601135) (xy 139.126585 97.186704) (xy 139.072068 97.214481) (xy 139.056581 97.2157) + (xy 138.563159 97.2157) (xy 138.504968 97.196793) (xy 138.493161 97.186709) (xy 138.412163 97.105711) + (xy 138.41216 97.105709) (xy 138.412158 97.105707) (xy 138.309439 97.046402) (xy 138.30944 97.046402) + (xy 138.292534 97.041872) (xy 138.194859 97.0157) (xy 138.076241 97.0157) (xy 138.021858 97.030272) + (xy 137.961659 97.046402) (xy 137.858941 97.105707) (xy 137.775057 97.189591) (xy 137.715752 97.292309) + (xy 137.704287 97.335099) (xy 137.68505 97.406891) (xy 137.68505 97.525509) (xy 137.707535 97.609424) + (xy 137.715752 97.64009) (xy 137.775057 97.742808) (xy 137.775059 97.74281) (xy 137.775061 97.742813) + (xy 137.858937 97.826689) (xy 137.858939 97.82669) (xy 137.858941 97.826692) (xy 137.96166 97.885997) + (xy 137.961661 97.885997) (xy 137.961664 97.885999) (xy 138.076241 97.9167) (xy 138.076243 97.9167) + (xy 138.194857 97.9167) (xy 138.194859 97.9167) (xy 138.309436 97.885999) (xy 138.309438 97.885997) + (xy 138.30944 97.885997) (xy 138.412158 97.826692) (xy 138.412158 97.826691) (xy 138.412163 97.826689) + (xy 138.493157 97.745694) (xy 138.547672 97.717919) (xy 138.563159 97.7167) (xy 139.251179 97.7167) + (xy 139.309865 97.692391) (xy 139.343247 97.678564) (xy 141.269215 95.752596) (xy 141.323732 95.724819) + (xy 141.339219 95.7236) (xy 141.512207 95.7236) (xy 141.523489 95.727265) (xy 141.535318 95.726335) + (xy 141.551901 95.736497) (xy 141.570398 95.742507) (xy 141.577371 95.752105) (xy 141.587487 95.758304) + (xy 141.594929 95.776271) (xy 141.606362 95.792007) (xy 141.606362 95.803871) (xy 141.610902 95.814832) + (xy 141.606362 95.833743) (xy 141.606362 95.853193) (xy 141.599388 95.862791) (xy 141.596619 95.874327) + (xy 141.58183 95.886957) (xy 141.570398 95.902693) (xy 141.550093 95.914064) (xy 141.499557 95.934997) + (xy 141.499555 95.934997) (xy 141.466875 95.948533) (xy 141.360334 96.01972) (xy 139.48637 97.893684) + (xy 139.437041 97.967513) (xy 139.415184 98.000223) (xy 139.36615 98.118602) (xy 139.366149 98.118605) + (xy 139.366149 98.118606) (xy 139.356281 98.168213) (xy 139.34115 98.24428) (xy 139.34115 99.612646) + (xy 139.322243 99.670837) (xy 139.312154 99.68265) (xy 138.6315 100.363304) (xy 138.576983 100.391081) + (xy 138.561496 100.3923) (xy 136.296561 100.3923) (xy 136.23837 100.373393) (xy 136.202406 100.323893) + (xy 136.202406 100.262707) (xy 136.20762 100.24982) (xy 136.232222 100.199495) (xy 136.232221 100.199495) + (xy 136.232223 100.199493) (xy 136.24215 100.13136) (xy 136.24215 99.51484) (xy 136.232223 99.446707) + (xy 136.228688 99.439477) (xy 136.189222 99.358747) (xy 136.180848 99.341617) (xy 136.098133 99.258902) + (xy 135.997669 99.209788) (xy 135.953696 99.167246) (xy 135.94215 99.120848) (xy 135.94215 97.475868) + (xy 135.961057 97.417677) (xy 135.97114 97.40587) (xy 140.417714 92.959295) (xy 140.472231 92.931519) + (xy 140.487718 92.9303) (xy 140.602257 92.9303) (xy 140.602259 92.9303) (xy 140.716836 92.899599) + (xy 140.716838 92.899597) (xy 140.71684 92.899597) (xy 140.819558 92.840292) (xy 140.819558 92.840291) + (xy 140.819563 92.840289) (xy 140.903439 92.756413) (xy 140.925552 92.718113) (xy 140.962747 92.65369) + (xy 140.962747 92.653688) (xy 140.962749 92.653686) (xy 140.99345 92.539109) (xy 140.99345 92.420491) + (xy 140.962749 92.305914) (xy 140.962747 92.305911) (xy 140.962747 92.305909) (xy 140.903442 92.203191) + (xy 140.90344 92.203189) (xy 140.903439 92.203187) (xy 140.819753 92.119501) (xy 140.791978 92.064987) + (xy 140.801549 92.004555) (xy 140.844814 91.96129) (xy 140.889759 91.9505) (xy 141.444375 91.9505) + (xy 141.444377 91.9505) (xy 141.546237 91.923207) (xy 141.637563 91.87048) (xy 141.71213 91.795913) + (xy 141.764857 91.704587) (xy 141.79215 91.602727) (xy 141.79215 91.3226) (xy 141.811057 91.264409) + (xy 141.860557 91.228445) (xy 141.89115 91.2236) (xy 141.906469 91.2236) (xy 141.90647 91.2236) + (xy 141.906471 91.223599) (xy 141.906477 91.223599) (xy 141.928273 91.219262) (xy 141.950372 91.214867) + (xy 142.000154 91.181604) (xy 142.033417 91.131822) (xy 142.040179 91.09783) (xy 142.042149 91.087927) + (xy 142.04215 91.087918) (xy 142.04215 89.558281) (xy 142.042149 89.558272) (xy 142.033417 89.514379) + (xy 142.033415 89.514375) (xy 142.014297 89.485763) (xy 142.000154 89.464596) (xy 141.988744 89.456972) + (xy 141.950374 89.431334) (xy 141.95037 89.431332) (xy 141.906477 89.4226) (xy 141.90647 89.4226) + (xy 140.87683 89.4226) (xy 140.876822 89.4226) (xy 140.832929 89.431332) (xy 140.832924 89.431334) + (xy 140.825786 89.436104) (xy 140.766897 89.452709) (xy 140.721291 89.439524) (xy 140.719403 89.438434) + (xy 140.7194 89.438433) (xy 140.64165 89.4176) (xy 140.025824 89.4176) (xy 139.985582 89.422898) + (xy 139.985579 89.422898) (xy 139.985577 89.422899) (xy 139.934942 89.436467) (xy 139.858417 89.456972) + (xy 139.858403 89.456976) (xy 139.820911 89.472506) (xy 139.820908 89.472507) (xy 139.820907 89.472508) + (xy 139.7639 89.505421) (xy 139.706889 89.538336) (xy 139.674694 89.56304) (xy 139.674688 89.563045) + (xy 139.674688 89.563046) (xy 139.594128 89.643605) (xy 139.539614 89.671381) (xy 139.524127 89.6726) + (xy 137.548958 89.6726) (xy 137.54136 89.670131) (xy 137.533471 89.671381) (xy 137.512815 89.660856) + (xy 137.490767 89.653693) (xy 137.478954 89.643604) (xy 137.420875 89.585525) (xy 137.393098 89.531008) + (xy 137.402669 89.470576) (xy 137.445934 89.427311) (xy 137.465251 89.419895) (xy 137.497336 89.411299) + (xy 137.598156 89.35309) (xy 137.600058 89.351992) (xy 137.600058 89.351991) (xy 137.600063 89.351989) + (xy 137.683939 89.268113) (xy 137.700455 89.239507) (xy 137.743247 89.16539) (xy 137.743247 89.165388) + (xy 137.743249 89.165386) (xy 137.77395 89.050809) (xy 137.77395 88.932191) (xy 137.743249 88.817614) + (xy 137.743247 88.817611) (xy 137.743247 88.817609) (xy 137.683942 88.714891) (xy 137.68394 88.714889) + (xy 137.683939 88.714887) (xy 137.600063 88.631011) (xy 137.60006 88.631009) (xy 137.600058 88.631007) + (xy 137.497339 88.571702) (xy 137.49734 88.571702) (xy 137.46876 88.564044) (xy 137.382759 88.541) + (xy 137.264141 88.541) (xy 137.194017 88.559789) (xy 137.149559 88.571702) (xy 137.046841 88.631007) + (xy 136.962957 88.714891) (xy 136.903652 88.817609) (xy 136.872949 88.932193) (xy 136.872103 88.938625) + (xy 136.869761 88.938316) (xy 136.854043 88.986694) (xy 136.804543 89.022658) (xy 136.743357 89.022658) + (xy 136.736065 89.019967) (xy 136.692223 89.001807) (xy 136.692213 89.001804) (xy 136.518244 88.9672) + (xy 136.518242 88.9672) (xy 136.518241 88.9672) (xy 135.039842 88.9672) (xy 134.862458 88.9672) + (xy 134.862455 88.9672) (xy 134.688486 89.001804) (xy 134.68848 89.001806) (xy 134.607226 89.035464) + (xy 134.607225 89.035464) (xy 134.524605 89.069685) (xy 134.524604 89.069685) (xy 134.447642 89.121111) + (xy 134.447641 89.121112) (xy 134.377117 89.168233) (xy 133.285046 90.260304) (xy 133.230529 90.288081) + (xy 133.215042 90.2893) (xy 130.265011 90.2893) (xy 130.20682 90.270393) (xy 130.170856 90.220893) + (xy 130.170856 90.159707) (xy 130.20682 90.110207) (xy 130.227126 90.098836) (xy 130.318192 90.061115) + (xy 130.318191 90.061115) (xy 130.318197 90.061113) (xy 130.318199 90.061111) (xy 130.318204 90.061109) + (xy 130.365392 90.029578) (xy 130.465686 89.962564) (xy 130.591114 89.837136) (xy 135.015654 85.412596) + (xy 135.070171 85.384819) (xy 135.085658 85.3836) (xy 142.837642 85.3836) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 136.494851 91.310037) (xy 136.521741 91.310037) (xy 136.52902 91.312722) (xy 136.57853 91.33323) - (xy 136.781485 91.373601) (xy 136.781486 91.373601) (xy 136.993295 91.373601) (xy 136.993315 91.3736) - (xy 139.981357 91.3736) (xy 139.994269 91.374446) (xy 139.997832 91.374914) (xy 140.003012 91.375596) - (xy 140.058239 91.401931) (xy 140.087439 91.455699) (xy 140.079459 91.516361) (xy 140.060103 91.543754) - (xy 136.738853 94.865004) (xy 136.684336 94.892781) (xy 136.668849 94.894) (xy 136.649674 94.894) - (xy 136.591483 94.875093) (xy 136.555519 94.825593) (xy 136.555156 94.824452) (xy 136.534667 94.758701) - (xy 136.534667 94.758699) (xy 136.446725 94.613227) (xy 136.326522 94.493024) (xy 136.18105 94.405082) + (xy 131.805199 92.093191) (xy 131.814478 92.091983) (xy 131.833686 92.102447) (xy 131.854492 92.109207) + (xy 131.859992 92.116777) (xy 131.868208 92.121253) (xy 131.877596 92.141007) (xy 131.890456 92.158707) + (xy 131.890456 92.168064) (xy 131.894472 92.176515) (xy 131.890456 92.198016) (xy 131.890456 92.219893) + (xy 131.883811 92.233592) (xy 131.883238 92.23666) (xy 131.881098 92.240587) (xy 131.843837 92.296353) + (xy 131.824013 92.344213) (xy 131.822001 92.349068) (xy 131.822001 92.34907) (xy 131.775956 92.46023) + (xy 131.775954 92.460236) (xy 131.74142 92.633851) (xy 131.741414 92.633886) (xy 131.74135 92.634209) + (xy 131.74135 92.63421) (xy 131.74135 95.036775) (xy 131.722443 95.094966) (xy 131.672943 95.13093) + (xy 131.611757 95.13093) (xy 131.611211 95.13075) (xy 131.544346 95.108594) (xy 131.544343 95.108593) + (xy 131.441637 95.0981) (xy 131.391651 95.0981) (xy 131.39165 95.098101) (xy 131.39165 97.548098) + (xy 131.391651 97.548099) (xy 131.441636 97.548099) (xy 131.544337 97.537607) (xy 131.544348 97.537604) + (xy 131.61121 97.515449) (xy 131.672394 97.515093) (xy 131.722102 97.550768) (xy 131.741348 97.608847) + (xy 131.74135 97.609424) (xy 131.74135 100.41451) (xy 131.73592 100.43122) (xy 131.735231 100.448775) + (xy 131.726701 100.459595) (xy 131.722443 100.472701) (xy 131.697352 100.496825) (xy 131.5832 100.5731) + (xy 131.552915 100.593335) (xy 130.111653 102.034596) (xy 130.057136 102.062373) (xy 129.996704 102.052802) + (xy 129.971645 102.034596) (xy 129.63343 101.696381) (xy 129.222886 101.285836) (xy 129.163809 101.246363) + (xy 129.075397 101.187287) (xy 129.075398 101.187287) (xy 129.075396 101.187286) (xy 128.911514 101.119404) + (xy 128.737544 101.0848) (xy 128.737542 101.0848) (xy 128.737541 101.0848) (xy 126.729396 101.0848) + (xy 126.714631 101.080002) (xy 126.699109 101.080053) (xy 126.686268 101.070787) (xy 126.671205 101.065893) + (xy 126.662079 101.053333) (xy 126.649492 101.04425) (xy 126.64455 101.029205) (xy 126.635241 101.016393) + (xy 126.635241 101.000867) (xy 126.630397 100.986121) (xy 126.635241 100.971046) (xy 126.635241 100.955207) + (xy 126.644366 100.942646) (xy 126.649115 100.927869) (xy 126.660344 100.920654) (xy 126.671205 100.905707) + (xy 126.698498 100.891745) (xy 126.704198 100.889872) (xy 126.764916 100.877795) (xy 126.85326 100.841201) + (xy 126.928797 100.809913) (xy 126.928798 100.809912) (xy 126.928801 100.809911) (xy 126.928804 100.809909) + (xy 127.057973 100.7236) (xy 127.057974 100.723599) (xy 127.076286 100.711364) (xy 129.941114 97.846535) + (xy 129.961129 97.816581) (xy 130.008627 97.745496) (xy 130.039659 97.699054) (xy 130.039665 97.699042) + (xy 130.065446 97.636801) (xy 130.065446 97.6368) (xy 130.074799 97.61422) (xy 130.107545 97.535166) + (xy 130.14215 97.361191) (xy 130.14215 97.348268) (xy 130.161057 97.290077) (xy 130.210557 97.254113) + (xy 130.271743 97.254113) (xy 130.311154 97.278264) (xy 130.423309 97.390419) (xy 130.572525 97.482456) + (xy 130.738956 97.537606) (xy 130.841663 97.548099) (xy 130.89165 97.548098) (xy 130.89165 95.098099) + (xy 130.841665 95.0981) (xy 130.841662 95.098101) (xy 130.738962 95.108592) (xy 130.73895 95.108595) + (xy 130.572525 95.163743) (xy 130.423309 95.25578) (xy 130.29933 95.379759) (xy 130.207293 95.528975) + (xy 130.152143 95.695406) (xy 130.147361 95.742209) (xy 130.138876 95.761415) (xy 130.134439 95.781941) + (xy 130.126784 95.788785) (xy 130.122636 95.798176) (xy 130.104482 95.808727) (xy 130.088828 95.822725) + (xy 130.078613 95.823762) (xy 130.069737 95.828922) (xy 130.048847 95.826787) (xy 130.027956 95.82891) + (xy 130.02059 95.823899) (xy 130.008868 95.822702) (xy 129.975074 95.798134) (xy 129.970432 95.792943) + (xy 129.941114 95.749065) (xy 129.847428 95.655379) (xy 129.845578 95.65331) (xy 129.844219 95.65023) + (xy 129.831169 95.632267) (xy 129.827809 95.625673) (xy 129.8197 95.609758) (xy 129.729992 95.52005) + (xy 129.616954 95.462454) (xy 129.616955 95.462454) (xy 129.523172 95.4476) (xy 129.523169 95.4476) + (xy 129.465776 95.4476) (xy 129.446462 95.445698) (xy 129.330343 95.4226) (xy 129.330341 95.4226) + (xy 129.152959 95.4226) (xy 129.152954 95.4226) (xy 129.036832 95.445698) (xy 129.017521 95.4476) + (xy 128.960128 95.4476) (xy 128.960127 95.447601) (xy 128.866349 95.462452) (xy 128.866345 95.462454) + (xy 128.753308 95.52005) (xy 128.753306 95.520051) (xy 128.6636 95.609756) (xy 128.663597 95.60976) + (xy 128.652127 95.632271) (xy 128.633923 95.657326) (xy 128.542187 95.749063) (xy 128.443635 95.896555) + (xy 128.375414 96.061259) (xy 128.335678 96.107785) (xy 128.276183 96.122069) (xy 128.219655 96.098654) + (xy 128.187685 96.046486) (xy 128.18495 96.023374) (xy 128.18495 95.736859) (xy 128.184951 95.73685) + (xy 128.184951 95.625673) (xy 128.158926 95.562844) (xy 128.158926 95.562843) (xy 128.146815 95.533605) + (xy 128.146814 95.533604) (xy 128.146814 95.533603) (xy 128.076347 95.463136) (xy 128.076345 95.463135) + (xy 127.986846 95.373636) (xy 127.959069 95.319119) (xy 127.95785 95.303632) (xy 127.95785 95.189092) + (xy 127.956911 95.185587) (xy 127.927149 95.074514) (xy 127.927147 95.074511) (xy 127.927147 95.074509) + (xy 127.867842 94.971791) (xy 127.86784 94.971789) (xy 127.867839 94.971787) (xy 127.783963 94.887911) + (xy 127.78396 94.887909) (xy 127.783958 94.887907) (xy 127.681239 94.828602) (xy 127.68124 94.828602) + (xy 127.646192 94.819211) (xy 127.566659 94.7979) (xy 127.448041 94.7979) (xy 127.377917 94.816689) + (xy 127.333459 94.828602) (xy 127.230741 94.887907) (xy 127.146857 94.971791) (xy 127.087552 95.074509) + (xy 127.072434 95.13093) (xy 127.05685 95.189091) (xy 127.05685 95.307709) (xy 127.078477 95.388423) + (xy 127.087552 95.42229) (xy 127.146857 95.525008) (xy 127.146859 95.52501) (xy 127.146861 95.525013) + (xy 127.230737 95.608889) (xy 127.230739 95.60889) (xy 127.230741 95.608892) (xy 127.33346 95.668197) + (xy 127.333461 95.668197) (xy 127.333464 95.668199) (xy 127.448041 95.6989) (xy 127.448043 95.6989) + (xy 127.562582 95.6989) (xy 127.570179 95.701368) (xy 127.578069 95.700119) (xy 127.598724 95.710643) + (xy 127.620773 95.717807) (xy 127.632586 95.727896) (xy 127.654954 95.750264) (xy 127.682731 95.804781) + (xy 127.68395 95.820268) (xy 127.68395 96.371281) (xy 127.665043 96.429472) (xy 127.615543 96.465436) + (xy 127.554357 96.465436) (xy 127.535451 96.457018) (xy 127.495239 96.433802) (xy 127.495236 96.433801) + (xy 127.380659 96.4031) (xy 127.262041 96.4031) (xy 127.19426 96.421262) (xy 127.147459 96.433802) + (xy 127.044741 96.493107) (xy 127.04474 96.493108) (xy 127.044737 96.49311) (xy 127.044737 96.493111) + (xy 126.963742 96.574105) (xy 126.909228 96.601881) (xy 126.893741 96.6031) (xy 124.866919 96.6031) + (xy 124.859321 96.600631) (xy 124.851432 96.601881) (xy 124.830776 96.591356) (xy 124.808728 96.584193) + (xy 124.796915 96.574104) (xy 124.775415 96.552604) (xy 124.747638 96.498087) (xy 124.757209 96.437655) + (xy 124.800474 96.39439) (xy 124.845419 96.3836) (xy 124.890957 96.3836) (xy 124.890959 96.3836) + (xy 125.005536 96.352899) (xy 125.005538 96.352897) (xy 125.00554 96.352897) (xy 125.108258 96.293592) + (xy 125.108258 96.293591) (xy 125.108263 96.293589) (xy 125.192139 96.209713) (xy 125.192142 96.209708) + (xy 125.251447 96.10699) (xy 125.251447 96.106988) (xy 125.251449 96.106986) (xy 125.28215 95.992409) + (xy 125.28215 95.873791) (xy 125.251449 95.759214) (xy 125.251447 95.759211) (xy 125.251447 95.759209) + (xy 125.192142 95.656491) (xy 125.19214 95.656489) (xy 125.192139 95.656487) (xy 125.148158 95.612506) + (xy 125.120383 95.557992) (xy 125.129954 95.49756) (xy 125.173219 95.454295) (xy 125.205246 95.444351) + (xy 125.210946 95.4436) (xy 125.210959 95.4436) (xy 125.325536 95.412899) (xy 125.325538 95.412897) + (xy 125.32554 95.412897) (xy 125.428258 95.353592) (xy 125.428258 95.353591) (xy 125.428263 95.353589) + (xy 125.512139 95.269713) (xy 125.528649 95.241117) (xy 125.571447 95.16699) (xy 125.571447 95.166988) + (xy 125.571449 95.166986) (xy 125.60215 95.052409) (xy 125.60215 94.933791) (xy 125.571449 94.819214) + (xy 125.51512 94.721651) (xy 125.502399 94.661803) (xy 125.527285 94.605908) (xy 125.580273 94.575315) + (xy 125.587935 94.573998) (xy 125.590955 94.5736) (xy 125.590959 94.5736) (xy 125.705536 94.542899) + (xy 125.705538 94.542897) (xy 125.70554 94.542897) (xy 125.808258 94.483592) (xy 125.808258 94.483591) + (xy 125.808263 94.483589) (xy 125.892139 94.399713) (xy 125.905315 94.376892) (xy 125.951447 94.29699) + (xy 125.951447 94.296988) (xy 125.951449 94.296986) (xy 125.98215 94.182409) (xy 125.98215 94.063791) + (xy 125.951449 93.949214) (xy 125.951447 93.949211) (xy 125.951447 93.949209) (xy 125.892142 93.846491) + (xy 125.89214 93.846489) (xy 125.892139 93.846487) (xy 125.808263 93.762611) (xy 125.804184 93.760256) + (xy 125.800859 93.758336) (xy 125.759919 93.712866) (xy 125.753524 93.652016) (xy 125.784117 93.599028) + (xy 125.840013 93.574142) (xy 125.85036 93.5736) (xy 129.981479 93.5736) (xy 130.027512 93.554532) + (xy 130.073547 93.535464) (xy 130.321812 93.287196) (xy 130.376329 93.259419) (xy 130.391816 93.2582) + (xy 130.506357 93.2582) (xy 130.506359 93.2582) (xy 130.620936 93.227499) (xy 130.620938 93.227497) + (xy 130.62094 93.227497) (xy 130.723658 93.168192) (xy 130.723658 93.168191) (xy 130.723663 93.168189) + (xy 130.807539 93.084313) (xy 130.808189 93.083187) (xy 130.866847 92.98159) (xy 130.866847 92.981588) + (xy 130.866849 92.981586) (xy 130.89755 92.867009) (xy 130.89755 92.748391) (xy 130.866849 92.633814) + (xy 130.866847 92.633811) (xy 130.866847 92.633809) (xy 130.807542 92.531091) (xy 130.80754 92.531089) + (xy 130.807539 92.531087) (xy 130.723663 92.447211) (xy 130.72366 92.447209) (xy 130.723658 92.447207) + (xy 130.620939 92.387902) (xy 130.62094 92.387902) (xy 130.584556 92.378153) (xy 130.506359 92.3572) + (xy 130.387741 92.3572) (xy 130.332291 92.372058) (xy 130.273162 92.387901) (xy 130.191825 92.434862) + (xy 130.131976 92.447583) (xy 130.076081 92.422696) (xy 130.046698 92.374749) (xy 130.022949 92.286114) + (xy 130.022947 92.286111) (xy 130.022947 92.286109) (xy 129.995633 92.2388) (xy 129.982911 92.178952) + (xy 130.007798 92.123056) (xy 130.060786 92.092463) (xy 130.081369 92.0903) (xy 131.796301 92.0903) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 139.531724 90.976068) (xy 139.539614 90.974819) (xy 139.560269 90.985343) (xy 139.582318 90.992507) + (xy 139.594124 91.00259) (xy 139.674688 91.083154) (xy 139.674692 91.083157) (xy 139.674694 91.083159) + (xy 139.706889 91.107863) (xy 139.706893 91.107866) (xy 139.820907 91.173692) (xy 139.85841 91.189226) + (xy 139.985577 91.223301) (xy 139.985585 91.223302) (xy 139.985589 91.223303) (xy 139.988762 91.223935) + (xy 139.988571 91.224891) (xy 140.040332 91.249564) (xy 140.069541 91.303327) (xy 140.061571 91.363991) + (xy 140.042208 91.391398) (xy 136.676856 94.756749) (xy 136.622339 94.784526) (xy 136.561907 94.774955) + (xy 136.52213 94.737961) (xy 136.446727 94.613229) (xy 136.326522 94.493024) (xy 136.18105 94.405082) (xy 136.181042 94.405079) (xy 136.01876 94.35451) (xy 136.018754 94.354508) (xy 135.948231 94.3481) - (xy 135.941651 94.3481) (xy 135.94165 94.348101) (xy 135.94165 96.298098) (xy 135.952432 96.30888) - (xy 135.977441 96.317006) (xy 136.013405 96.366506) (xy 136.013405 96.427692) (xy 135.989254 96.467101) - (xy 135.890052 96.566305) (xy 135.371166 97.085191) (xy 135.318444 97.176507) (xy 135.308802 97.212494) - (xy 135.293077 97.27118) (xy 135.292633 97.272838) (xy 135.29115 97.278371) (xy 135.29115 97.3139) - (xy 135.272243 97.372091) (xy 135.222743 97.408055) (xy 135.19215 97.4129) (xy 135.152493 97.4129) - (xy 135.080524 97.432184) (xy 134.999764 97.453823) (xy 134.962651 97.475251) (xy 134.902803 97.487972) - (xy 134.846907 97.463085) (xy 134.816315 97.410096) (xy 134.817524 97.363895) (xy 134.84015 97.279457) - (xy 134.84015 97.121343) (xy 134.799227 96.968616) (xy 134.72017 96.831684) (xy 134.702086 96.8136) - (xy 134.669146 96.780659) (xy 134.641369 96.726142) (xy 134.64015 96.710656) (xy 134.64015 95.933888) - (xy 134.640378 95.933183) (xy 134.64016 95.932475) (xy 134.649808 95.904162) (xy 134.659057 95.875697) - (xy 134.659842 95.874632) (xy 134.67419 95.855466) (xy 134.724197 95.820214) (xy 134.785376 95.821088) - (xy 134.834357 95.857755) (xy 134.847957 95.885336) (xy 134.848628 95.88749) (xy 134.848632 95.8875) - (xy 134.936574 96.032972) (xy 135.056777 96.153175) (xy 135.202249 96.241117) (xy 135.202257 96.24112) - (xy 135.364539 96.291689) (xy 135.364545 96.291691) (xy 135.435075 96.298098) (xy 135.44165 96.298098) - (xy 135.44165 94.348101) (xy 135.441648 94.348099) (xy 135.435075 94.3481) (xy 135.364546 94.354508) - (xy 135.36454 94.35451) (xy 135.202257 94.405079) (xy 135.202249 94.405082) (xy 135.056777 94.493024) - (xy 134.936574 94.613227) (xy 134.848632 94.758699) (xy 134.848628 94.758709) (xy 134.847956 94.760867) - (xy 134.847137 94.762022) (xy 134.846173 94.764165) (xy 134.845753 94.763976) (xy 134.812587 94.810793) - (xy 134.754627 94.830396) (xy 134.696214 94.812186) (xy 134.674189 94.790732) (xy 134.652513 94.761777) - (xy 134.599196 94.690554) (xy 134.596884 94.688823) (xy 134.481821 94.602686) (xy 134.446568 94.552677) - (xy 134.44215 94.523433) (xy 134.44215 93.18) (xy 134.461057 93.121809) (xy 134.47114 93.110002) - (xy 135.453547 92.127594) (xy 135.508064 92.099818) (xy 135.523551 92.098599) (xy 135.939517 92.098599) - (xy 135.939522 92.098599) (xy 135.999133 92.092191) (xy 136.07102 92.065379) (xy 136.133979 92.041897) - (xy 136.133979 92.041896) (xy 136.133981 92.041896) (xy 136.249196 91.955646) (xy 136.335446 91.840431) - (xy 136.348924 91.804296) (xy 136.376024 91.731636) (xy 136.385741 91.705583) (xy 136.39215 91.645973) - (xy 136.392149 91.40419) (xy 136.393396 91.400351) (xy 136.392454 91.396425) (xy 136.402745 91.37158) - (xy 136.411056 91.346002) (xy 136.414323 91.343627) (xy 136.415869 91.339897) (xy 136.438801 91.325843) - (xy 136.460556 91.310038) (xy 136.464593 91.310037) (xy 136.468038 91.307927) + (xy 135.941651 94.3481) (xy 135.94165 94.348101) (xy 135.94165 96.298098) (xy 135.941651 96.298099) + (xy 135.948216 96.298099) (xy 135.948232 96.298098) (xy 136.018753 96.291691) (xy 136.018759 96.291689) + (xy 136.155399 96.249111) (xy 136.21658 96.24985) (xy 136.265642 96.286409) (xy 136.283845 96.344824) + (xy 136.264236 96.402782) (xy 136.254856 96.413632) (xy 135.549753 97.118736) (xy 135.549752 97.118735) + (xy 135.479285 97.189203) (xy 135.44115 97.281271) (xy 135.44115 97.474151) (xy 135.422243 97.532342) + (xy 135.372743 97.568306) (xy 135.316528 97.569778) (xy 135.290859 97.5629) (xy 135.172241 97.5629) + (xy 135.116582 97.577814) (xy 135.057659 97.593602) (xy 134.954941 97.652907) (xy 134.871057 97.736791) + (xy 134.811752 97.839509) (xy 134.799838 97.883972) (xy 134.78105 97.954091) (xy 134.78105 98.072709) + (xy 134.793454 98.119) (xy 134.811752 98.18729) (xy 134.871057 98.290008) (xy 134.871059 98.29001) + (xy 134.871061 98.290013) (xy 134.954937 98.373889) (xy 134.971702 98.383568) (xy 134.971704 98.38357) + (xy 135.05766 98.433197) (xy 135.057661 98.433197) (xy 135.057664 98.433199) (xy 135.172241 98.4639) + (xy 135.172243 98.4639) (xy 135.290858 98.4639) (xy 135.290859 98.4639) (xy 135.316527 98.457022) + (xy 135.377626 98.460223) (xy 135.425177 98.498727) (xy 135.44115 98.552648) (xy 135.44115 99.120848) + (xy 135.422243 99.179039) (xy 135.38563 99.209789) (xy 135.285168 99.258901) (xy 135.202451 99.341618) + (xy 135.151077 99.446704) (xy 135.151077 99.446707) (xy 135.14115 99.51484) (xy 135.14115 100.13136) + (xy 135.146246 100.166333) (xy 135.151077 100.199495) (xy 135.17568 100.24982) (xy 135.184251 100.310402) + (xy 135.155576 100.364451) (xy 135.100607 100.391324) (xy 135.086739 100.3923) (xy 134.646561 100.3923) + (xy 134.58837 100.373393) (xy 134.552406 100.323893) (xy 134.552406 100.262707) (xy 134.55762 100.24982) + (xy 134.582222 100.199495) (xy 134.582221 100.199495) (xy 134.582223 100.199493) (xy 134.59215 100.13136) + (xy 134.59215 99.667868) (xy 134.611057 99.609677) (xy 134.621146 99.597864) (xy 134.633646 99.585364) + (xy 134.633647 99.585364) (xy 134.704114 99.514897) (xy 134.736022 99.437864) (xy 134.742251 99.422827) + (xy 134.742251 99.323172) (xy 134.74225 99.323169) (xy 134.74225 99.247609) (xy 134.761157 99.189418) + (xy 134.77124 99.177611) (xy 134.852239 99.096613) (xy 134.874371 99.05828) (xy 134.911547 98.99389) + (xy 134.911547 98.993888) (xy 134.911549 98.993886) (xy 134.94225 98.879309) (xy 134.94225 98.760691) + (xy 134.911549 98.646114) (xy 134.911547 98.646111) (xy 134.911547 98.646109) (xy 134.852242 98.543391) + (xy 134.85224 98.543389) (xy 134.852239 98.543387) (xy 134.768363 98.459511) (xy 134.751597 98.449831) + (xy 134.751594 98.449828) (xy 134.665639 98.400202) (xy 134.66564 98.400202) (xy 134.648517 98.395614) + (xy 134.551059 98.3695) (xy 134.432441 98.3695) (xy 134.366168 98.387258) (xy 134.317859 98.400202) + (xy 134.215141 98.459507) (xy 134.131257 98.543391) (xy 134.071952 98.646109) (xy 134.071951 98.646114) + (xy 134.04125 98.760691) (xy 134.04125 98.879309) (xy 134.05772 98.940774) (xy 134.071952 98.99389) + (xy 134.103828 99.0491) (xy 134.11655 99.108948) (xy 134.091663 99.164844) (xy 134.038675 99.195437) + (xy 134.018092 99.1976) (xy 133.80839 99.1976) (xy 133.774323 99.202563) (xy 133.740254 99.207527) + (xy 133.68483 99.234623) (xy 133.624248 99.243194) (xy 133.570198 99.214518) (xy 133.543326 99.15955) + (xy 133.54235 99.145682) (xy 133.54235 96.000517) (xy 133.561257 95.942326) (xy 133.610757 95.906362) + (xy 133.671943 95.906362) (xy 133.68483 95.911576) (xy 133.740257 95.938673) (xy 133.80839 95.9486) + (xy 133.89015 95.9486) (xy 133.948341 95.967507) (xy 133.984305 96.017007) (xy 133.98915 96.0476) + (xy 133.98915 96.77279) (xy 133.970243 96.830981) (xy 133.960154 96.842793) (xy 133.879161 96.923786) + (xy 133.879157 96.923791) (xy 133.819852 97.026509) (xy 133.807368 97.0731) (xy 133.78915 97.141091) + (xy 133.78915 97.259709) (xy 133.812968 97.348599) (xy 133.819852 97.37429) (xy 133.879157 97.477008) + (xy 133.879159 97.47701) (xy 133.879161 97.477013) (xy 133.963037 97.560889) (xy 133.963039 97.56089) + (xy 133.963041 97.560892) (xy 134.06576 97.620197) (xy 134.065761 97.620197) (xy 134.065764 97.620199) + (xy 134.180341 97.6509) (xy 134.180343 97.6509) (xy 134.298957 97.6509) (xy 134.298959 97.6509) + (xy 134.413536 97.620199) (xy 134.413538 97.620197) (xy 134.41354 97.620197) (xy 134.516258 97.560892) + (xy 134.516258 97.560891) (xy 134.516263 97.560889) (xy 134.600139 97.477013) (xy 134.601251 97.475087) + (xy 134.659447 97.37429) (xy 134.659447 97.374288) (xy 134.659449 97.374286) (xy 134.69015 97.259709) + (xy 134.69015 97.141091) (xy 134.659449 97.026514) (xy 134.659447 97.026511) (xy 134.659447 97.026509) + (xy 134.600142 96.923791) (xy 134.600138 96.923786) (xy 134.519146 96.842793) (xy 134.491369 96.788276) + (xy 134.49015 96.77279) (xy 134.49015 95.886288) (xy 134.509057 95.828097) (xy 134.51914 95.81629) + (xy 134.530848 95.804583) (xy 134.582223 95.699493) (xy 134.59215 95.63136) (xy 134.59215 95.573101) + (xy 134.791651 95.573101) (xy 134.791651 95.654682) (xy 134.798058 95.725203) (xy 134.79806 95.725209) + (xy 134.848629 95.887492) (xy 134.848632 95.8875) (xy 134.936574 96.032972) (xy 135.056777 96.153175) + (xy 135.202249 96.241117) (xy 135.202257 96.24112) (xy 135.364539 96.291689) (xy 135.364545 96.291691) + (xy 135.435075 96.298098) (xy 135.44165 96.298098) (xy 135.44165 95.573101) (xy 135.441649 95.5731) + (xy 134.791652 95.5731) (xy 134.791651 95.573101) (xy 134.59215 95.573101) (xy 134.59215 95.01484) + (xy 134.588752 94.991518) (xy 134.79165 94.991518) (xy 134.79165 95.073099) (xy 134.791651 95.0731) + (xy 135.441649 95.0731) (xy 135.44165 95.073099) (xy 135.44165 94.348101) (xy 135.441648 94.348099) + (xy 135.435075 94.3481) (xy 135.364546 94.354508) (xy 135.36454 94.35451) (xy 135.202257 94.405079) + (xy 135.202249 94.405082) (xy 135.056777 94.493024) (xy 134.936574 94.613227) (xy 134.848632 94.758699) + (xy 134.848629 94.758707) (xy 134.79806 94.920989) (xy 134.798058 94.920995) (xy 134.79165 94.991518) + (xy 134.588752 94.991518) (xy 134.582223 94.946707) (xy 134.580535 94.943255) (xy 134.55318 94.887298) + (xy 134.530848 94.841617) (xy 134.448133 94.758902) (xy 134.347669 94.709788) (xy 134.303696 94.667246) + (xy 134.29215 94.620848) (xy 134.29215 93.117868) (xy 134.311057 93.059677) (xy 134.32114 93.04787) + (xy 135.391414 91.977595) (xy 135.445931 91.949819) (xy 135.461418 91.9486) (xy 135.924907 91.9486) + (xy 135.92491 91.9486) (xy 135.993043 91.938673) (xy 136.098133 91.887298) (xy 136.180848 91.804583) + (xy 136.232223 91.699493) (xy 136.24215 91.63136) (xy 136.24215 91.161833) (xy 136.261057 91.103642) + (xy 136.310557 91.067678) (xy 136.371743 91.067678) (xy 136.39615 91.079517) (xy 136.401601 91.083159) + (xy 136.458396 91.121109) (xy 136.4584 91.121111) (xy 136.458403 91.121113) (xy 136.622284 91.188995) + (xy 136.796258 91.2236) (xy 136.796259 91.2236) (xy 136.973641 91.2236) (xy 136.973642 91.2236) + (xy 137.147616 91.188995) (xy 137.311497 91.121113) (xy 137.3115 91.12111) (xy 137.311504 91.121109) + (xy 137.368299 91.083159) (xy 137.458986 91.022564) (xy 137.478954 91.002596) (xy 137.533471 90.974819) + (xy 137.548958 90.9736) (xy 139.524127 90.9736) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 122.535125 92.569246) (xy 122.574141 92.58832) (xy 122.644701 92.5986) (xy 122.838598 92.598599) - (xy 122.856524 92.595987) (xy 122.916831 92.606308) (xy 122.959555 92.650106) (xy 122.968761 92.708221) - (xy 122.96615 92.726142) (xy 122.96615 92.920043) (xy 122.966151 92.920051) (xy 122.976428 92.990605) - (xy 122.97643 92.990609) (xy 122.995501 93.02962) (xy 123.004072 93.090201) (xy 122.995501 93.116579) - (xy 122.976431 93.155587) (xy 122.97643 93.155589) (xy 122.97643 93.155591) (xy 122.966151 93.226148) - (xy 122.96615 93.226154) (xy 122.96615 93.420043) (xy 122.966151 93.420051) (xy 122.976428 93.490605) - (xy 122.97643 93.490609) (xy 122.995501 93.52962) (xy 123.004072 93.590201) (xy 122.995501 93.616579) - (xy 122.976431 93.655587) (xy 122.97643 93.655589) (xy 122.97643 93.655591) (xy 122.966151 93.726148) - (xy 122.96615 93.726154) (xy 122.96615 93.920043) (xy 122.966151 93.920051) (xy 122.976428 93.990605) - (xy 122.97643 93.990609) (xy 122.995501 94.02962) (xy 123.004072 94.090201) (xy 122.995501 94.116579) - (xy 122.976431 94.155587) (xy 122.97643 94.155589) (xy 122.97643 94.155591) (xy 122.966151 94.226148) - (xy 122.96615 94.226154) (xy 122.96615 94.420043) (xy 122.966151 94.420051) (xy 122.976428 94.490605) - (xy 122.97643 94.490609) (xy 122.995501 94.52962) (xy 123.004072 94.590201) (xy 122.995501 94.616579) - (xy 122.976431 94.655587) (xy 122.97643 94.655589) (xy 122.974624 94.667984) (xy 122.968772 94.708159) - (xy 122.96615 94.726154) (xy 122.96615 94.920043) (xy 122.966151 94.920051) (xy 122.976428 94.990605) - (xy 122.97643 94.990609) (xy 122.995501 95.02962) (xy 123.004072 95.090201) (xy 122.995501 95.116579) - (xy 122.976431 95.155587) (xy 122.97643 95.155589) (xy 122.974436 95.169275) (xy 122.968125 95.2126) - (xy 122.96615 95.226154) (xy 122.96615 95.420043) (xy 122.966151 95.420051) (xy 122.976428 95.490605) - (xy 122.97643 95.490609) (xy 122.995501 95.52962) (xy 123.004072 95.590201) (xy 122.995501 95.616579) - (xy 122.976431 95.655587) (xy 122.97643 95.655589) (xy 122.97643 95.655591) (xy 122.966151 95.726148) - (xy 122.96615 95.726154) (xy 122.96615 95.920043) (xy 122.966151 95.920056) (xy 122.968762 95.937977) - (xy 122.958439 95.998285) (xy 122.914639 96.041007) (xy 122.856527 96.050211) (xy 122.8386 96.0476) - (xy 122.644706 96.0476) (xy 122.644698 96.047601) (xy 122.574142 96.057879) (xy 122.53513 96.076951) - (xy 122.474548 96.085522) (xy 122.448171 96.076951) (xy 122.409159 96.05788) (xy 122.40916 96.05788) - (xy 122.395047 96.055824) (xy 122.338599 96.0476) (xy 122.338595 96.0476) (xy 122.144706 96.0476) - (xy 122.144698 96.047601) (xy 122.074142 96.057879) (xy 122.03513 96.076951) (xy 121.974548 96.085522) - (xy 121.948171 96.076951) (xy 121.909159 96.05788) (xy 121.90916 96.05788) (xy 121.895047 96.055824) - (xy 121.838599 96.0476) (xy 121.838595 96.0476) (xy 121.644706 96.0476) (xy 121.644698 96.047601) - (xy 121.574142 96.057879) (xy 121.53513 96.076951) (xy 121.474548 96.085522) (xy 121.448171 96.076951) - (xy 121.409159 96.05788) (xy 121.40916 96.05788) (xy 121.395047 96.055824) (xy 121.338599 96.0476) - (xy 121.338595 96.0476) (xy 121.144706 96.0476) (xy 121.144698 96.047601) (xy 121.074142 96.057879) - (xy 121.03513 96.076951) (xy 120.974548 96.085522) (xy 120.948171 96.076951) (xy 120.909159 96.05788) - (xy 120.90916 96.05788) (xy 120.895047 96.055824) (xy 120.838599 96.0476) (xy 120.838595 96.0476) - (xy 120.644706 96.0476) (xy 120.644693 96.047601) (xy 120.626772 96.050212) (xy 120.566464 96.039889) - (xy 120.523741 95.996089) (xy 120.514538 95.937975) (xy 120.51715 95.920049) (xy 120.517149 95.726152) - (xy 120.50687 95.655591) (xy 120.506869 95.655589) (xy 120.506868 95.655585) (xy 120.487799 95.61658) - (xy 120.479227 95.555998) (xy 120.487799 95.529618) (xy 120.488113 95.528976) (xy 120.50687 95.490609) - (xy 120.51715 95.420049) (xy 120.517149 95.364897) (xy 120.536055 95.306709) (xy 120.550875 95.291497) - (xy 120.550744 95.291366) (xy 120.555332 95.286778) (xy 120.645494 95.169275) (xy 120.645494 95.169274) - (xy 120.702171 95.032442) (xy 120.702172 95.032442) (xy 120.713276 94.9481) (xy 120.364335 94.9481) - (xy 120.349423 94.943255) (xy 120.333742 94.943255) (xy 120.320855 94.938041) (xy 120.277237 94.916718) - (xy 120.267669 94.91204) (xy 120.223696 94.869498) (xy 120.213126 94.809233) (xy 120.239998 94.754264) - (xy 120.26767 94.734159) (xy 120.268814 94.7336) (xy 120.289269 94.7236) (xy 120.320855 94.708159) - (xy 120.329233 94.70622) (xy 120.333742 94.702945) (xy 120.343393 94.702945) (xy 120.364335 94.6981) - (xy 120.713276 94.6981) (xy 120.713276 94.698099) (xy 120.702171 94.613757) (xy 120.645494 94.476925) - (xy 120.645494 94.476924) (xy 120.555334 94.359425) (xy 120.550741 94.354832) (xy 120.551745 94.353827) - (xy 120.521224 94.309414) (xy 120.517149 94.281301) (xy 120.517149 94.226156) (xy 120.517148 94.226151) - (xy 120.50687 94.155591) (xy 120.506869 94.155589) (xy 120.506868 94.155585) (xy 120.487799 94.11658) - (xy 120.479227 94.055998) (xy 120.487799 94.029618) (xy 120.502167 94.000228) (xy 120.50687 93.990609) - (xy 120.51715 93.920049) (xy 120.517149 93.726152) (xy 120.50687 93.655591) (xy 120.506869 93.655589) - (xy 120.506868 93.655585) (xy 120.487799 93.61658) (xy 120.479227 93.555998) (xy 120.487799 93.529618) - (xy 120.50687 93.490609) (xy 120.51715 93.420049) (xy 120.517149 93.226152) (xy 120.50687 93.155591) - (xy 120.506869 93.155589) (xy 120.506868 93.155585) (xy 120.487799 93.11658) (xy 120.479227 93.055998) - (xy 120.487799 93.029618) (xy 120.500998 93.00262) (xy 120.50687 92.990609) (xy 120.51715 92.920049) - (xy 120.517149 92.726152) (xy 120.514537 92.708224) (xy 120.524858 92.647918) (xy 120.568656 92.605193) - (xy 120.626774 92.595988) (xy 120.644701 92.5986) (xy 120.838598 92.598599) (xy 120.886192 92.591665) - (xy 120.909154 92.588321) (xy 120.909155 92.58832) (xy 120.909159 92.58832) (xy 120.948169 92.569248) - (xy 121.00875 92.560677) (xy 121.035125 92.569246) (xy 121.074141 92.58832) (xy 121.144701 92.5986) - (xy 121.338598 92.598599) (xy 121.386192 92.591665) (xy 121.409154 92.588321) (xy 121.409155 92.58832) - (xy 121.409159 92.58832) (xy 121.448169 92.569248) (xy 121.50875 92.560677) (xy 121.535125 92.569246) - (xy 121.574141 92.58832) (xy 121.644701 92.5986) (xy 121.838598 92.598599) (xy 121.886192 92.591665) - (xy 121.909154 92.588321) (xy 121.909155 92.58832) (xy 121.909159 92.58832) (xy 121.948169 92.569248) - (xy 122.00875 92.560677) (xy 122.035125 92.569246) (xy 122.074141 92.58832) (xy 122.144701 92.5986) - (xy 122.338598 92.598599) (xy 122.386192 92.591665) (xy 122.409154 92.588321) (xy 122.409155 92.58832) - (xy 122.409159 92.58832) (xy 122.448169 92.569248) (xy 122.50875 92.560677) + (xy 102.082234 98.092007) (xy 102.094047 98.102096) (xy 103.112154 99.120203) (xy 103.139931 99.17472) + (xy 103.14115 99.190207) (xy 103.14115 99.616435) (xy 103.122243 99.674626) (xy 103.072743 99.71059) + (xy 103.011557 99.71059) (xy 102.987148 99.69875) (xy 102.898084 99.639238) (xy 102.898075 99.639234) + (xy 102.779697 99.5902) (xy 102.779695 99.590199) (xy 102.779694 99.590199) (xy 102.654019 99.5652) + (xy 101.923768 99.5652) (xy 101.865577 99.546293) (xy 101.829613 99.496793) (xy 101.829613 99.435607) + (xy 101.857274 99.395852) (xy 101.855916 99.394494) (xy 101.983969 99.26644) (xy 102.076006 99.117224) + (xy 102.131156 98.950793) (xy 102.14165 98.848087) (xy 102.14165 98.573101) (xy 102.141649 98.5731) + (xy 101.24065 98.5731) (xy 101.182459 98.554193) (xy 101.146495 98.504693) (xy 101.14165 98.4741) + (xy 101.14165 98.1721) (xy 101.160557 98.113909) (xy 101.210057 98.077945) (xy 101.24065 98.0731) + (xy 102.024043 98.0731) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 109.094438 84.690807) (xy 109.130402 84.740307) (xy 109.130402 84.801493) (xy 109.09904 84.844997) - (xy 109.099747 84.845704) (xy 109.095392 84.850058) (xy 109.095034 84.850556) (xy 109.094503 84.850947) - (xy 109.094495 84.850955) (xy 109.013857 84.960216) (xy 108.969005 85.088396) (xy 108.969003 85.088405) - (xy 108.96615 85.118825) (xy 108.96615 85.527374) (xy 108.969003 85.557794) (xy 108.969005 85.557803) - (xy 109.013857 85.685983) (xy 109.094497 85.795248) (xy 109.094499 85.795249) (xy 109.150938 85.836903) - (xy 109.159848 85.849361) (xy 109.172243 85.858367) (xy 109.177199 85.873622) (xy 109.186531 85.88667) - (xy 109.19115 85.916558) (xy 109.19115 85.999641) (xy 109.172243 86.057832) (xy 109.150938 86.079296) - (xy 109.094502 86.120947) (xy 109.0945 86.120949) (xy 109.013857 86.230216) (xy 108.969005 86.358396) - (xy 108.969003 86.358405) (xy 108.96615 86.388825) (xy 108.96615 86.797374) (xy 108.969003 86.827794) - (xy 108.969005 86.827803) (xy 109.013857 86.955983) (xy 109.094497 87.065248) (xy 109.094499 87.065249) - (xy 109.0945 87.06525) (xy 109.10581 87.073597) (xy 109.150938 87.106903) (xy 109.159848 87.119361) - (xy 109.172243 87.128367) (xy 109.177199 87.143622) (xy 109.186531 87.15667) (xy 109.19115 87.186558) - (xy 109.19115 87.269641) (xy 109.172243 87.327832) (xy 109.150938 87.349296) (xy 109.094502 87.390947) - (xy 109.0945 87.390949) (xy 109.013857 87.500216) (xy 108.969005 87.628396) (xy 108.969003 87.628405) - (xy 108.96615 87.658825) (xy 108.96615 88.067374) (xy 108.969003 88.097794) (xy 108.969005 88.097803) - (xy 109.013857 88.225983) (xy 109.094495 88.335244) (xy 109.094497 88.335246) (xy 109.0945 88.33525) - (xy 109.094503 88.335252) (xy 109.094505 88.335254) (xy 109.207224 88.418445) (xy 109.242817 88.468213) - (xy 109.242359 88.529396) (xy 109.207224 88.577755) (xy 109.094505 88.660945) (xy 109.094495 88.660955) - (xy 109.013857 88.770216) (xy 108.969005 88.898396) (xy 108.969003 88.898405) (xy 108.96615 88.928825) - (xy 108.96615 89.337374) (xy 108.969003 89.367794) (xy 108.969005 89.367803) (xy 109.013857 89.495983) - (xy 109.094495 89.605244) (xy 109.094497 89.605246) (xy 109.0945 89.60525) (xy 109.094503 89.605252) - (xy 109.094505 89.605254) (xy 109.203766 89.685892) (xy 109.203767 89.685892) (xy 109.203768 89.685893) - (xy 109.331951 89.730746) (xy 109.362375 89.733599) (xy 109.362377 89.7336) (xy 109.362384 89.7336) - (xy 110.234749 89.7336) (xy 110.29294 89.752507) (xy 110.304753 89.762596) (xy 112.236337 91.69418) - (xy 112.236339 91.694181) (xy 112.23634 91.694182) (xy 112.236341 91.694183) (xy 112.327658 91.746905) - (xy 112.327656 91.746905) (xy 112.32766 91.746906) (xy 112.327662 91.746907) (xy 112.429523 91.7742) - (xy 112.534977 91.7742) (xy 112.567006 91.7742) (xy 112.625197 91.793107) (xy 112.637009 91.803196) - (xy 112.664681 91.830867) (xy 112.688034 91.85422) (xy 112.824966 91.933277) (xy 112.977693 91.9742) - (xy 112.977695 91.9742) (xy 113.135805 91.9742) (xy 113.135807 91.9742) (xy 113.288534 91.933277) - (xy 113.425466 91.85422) (xy 113.53727 91.742416) (xy 113.548514 91.722939) (xy 113.59398 91.681999) - (xy 113.65483 91.675602) (xy 113.704254 91.702435) (xy 114.21767 92.215851) (xy 114.217673 92.215855) - (xy 114.363995 92.362177) (xy 114.536052 92.477141) (xy 114.72723 92.55633) (xy 114.930185 92.5967) - (xy 117.286211 92.5967) (xy 117.344402 92.615607) (xy 117.350785 92.621058) (xy 117.350838 92.620994) - (xy 117.354592 92.624075) (xy 117.354595 92.624077) (xy 117.42824 92.673285) (xy 117.530009 92.741284) - (xy 117.567889 92.789334) (xy 117.570291 92.850472) (xy 117.536299 92.901346) (xy 117.478895 92.922524) - (xy 117.475008 92.9226) (xy 114.685156 92.9226) (xy 114.68514 92.922599) (xy 114.679077 92.922599) - (xy 114.573623 92.922599) (xy 114.57362 92.922599) (xy 114.471763 92.949892) (xy 114.471759 92.949894) - (xy 114.380437 93.002619) (xy 114.305869 93.077186) (xy 114.30587 93.077187) (xy 113.582153 93.800904) - (xy 113.527636 93.828681) (xy 113.512149 93.8299) (xy 113.439993 93.8299) (xy 113.287266 93.870823) - (xy 113.150334 93.94988) (xy 113.03853 94.061684) (xy 112.959473 94.198616) (xy 112.91942 94.348099) - (xy 112.916871 94.357611) (xy 112.915586 94.357266) (xy 112.892256 94.406168) (xy 112.838483 94.435359) - (xy 112.777822 94.427367) (xy 112.750446 94.408019) (xy 109.490399 91.147972) (xy 106.043739 87.701311) - (xy 105.974427 87.654998) (xy 105.912635 87.613709) (xy 105.912624 87.613703) (xy 105.766947 87.553363) - (xy 105.612294 87.5226) (xy 105.612292 87.5226) (xy 104.179289 87.5226) (xy 104.121098 87.503693) - (xy 104.085134 87.454193) (xy 104.085134 87.393007) (xy 104.109285 87.353596) (xy 105.383586 86.079296) - (xy 106.761986 84.700896) (xy 106.816503 84.673119) (xy 106.83199 84.6719) (xy 109.036247 84.6719) + (xy 109.547645 84.527521) (xy 109.56581 84.528471) (xy 109.576028 84.536743) (xy 109.588535 84.540807) + (xy 109.599228 84.555525) (xy 109.613365 84.56697) (xy 109.616769 84.579668) (xy 109.624499 84.590307) + (xy 109.624499 84.608499) (xy 109.629209 84.626068) (xy 109.624499 84.638342) (xy 109.624499 84.651493) + (xy 109.611001 84.673518) (xy 109.60729 84.683192) (xy 109.60402 84.68723) (xy 109.542186 84.749065) + (xy 109.486527 84.832362) (xy 109.48367 84.835892) (xy 109.461629 84.850209) (xy 109.440988 84.866481) + (xy 109.436297 84.866665) (xy 109.43236 84.869223) (xy 109.406727 84.8726) (xy 109.371789 84.8726) + (xy 109.371785 84.872601) (xy 109.346659 84.875514) (xy 109.243885 84.920894) (xy 109.164444 85.000335) + (xy 109.119064 85.103111) (xy 109.11615 85.12823) (xy 109.11615 85.51796) (xy 109.116151 85.517963) + (xy 109.119064 85.54309) (xy 109.124168 85.554649) (xy 109.164444 85.645865) (xy 109.243885 85.725306) + (xy 109.282138 85.742196) (xy 109.327733 85.782995) (xy 109.34115 85.83276) (xy 109.34115 86.083439) + (xy 109.322243 86.14163) (xy 109.282139 86.174003) (xy 109.243886 86.190893) (xy 109.164444 86.270335) + (xy 109.119064 86.373111) (xy 109.11615 86.39823) (xy 109.11615 86.78796) (xy 109.116151 86.787963) + (xy 109.119064 86.81309) (xy 109.14024 86.861049) (xy 109.164444 86.915865) (xy 109.243885 86.995306) + (xy 109.282138 87.012196) (xy 109.327733 87.052995) (xy 109.34115 87.10276) (xy 109.34115 87.353439) + (xy 109.322243 87.41163) (xy 109.282139 87.444003) (xy 109.243886 87.460893) (xy 109.164444 87.540335) + (xy 109.119064 87.643111) (xy 109.11615 87.66823) (xy 109.11615 88.05796) (xy 109.116151 88.057963) + (xy 109.119064 88.08309) (xy 109.133125 88.114934) (xy 109.164444 88.185865) (xy 109.243885 88.265306) + (xy 109.346659 88.310685) (xy 109.371785 88.3136) (xy 109.406723 88.313599) (xy 109.464914 88.332505) + (xy 109.48904 88.357597) (xy 109.497214 88.36983) (xy 109.542185 88.437135) (xy 109.54219 88.437141) + (xy 109.618646 88.513596) (xy 109.646424 88.568112) (xy 109.636853 88.628545) (xy 109.593589 88.671809) + (xy 109.548644 88.6826) (xy 109.371789 88.6826) (xy 109.371786 88.682601) (xy 109.346659 88.685514) + (xy 109.243885 88.730894) (xy 109.164444 88.810335) (xy 109.119064 88.913111) (xy 109.11615 88.93823) + (xy 109.11615 89.32796) (xy 109.116151 89.327963) (xy 109.119064 89.35309) (xy 109.132608 89.383764) + (xy 109.164444 89.455865) (xy 109.243885 89.535306) (xy 109.346659 89.580685) (xy 109.371785 89.5836) + (xy 110.29688 89.583599) (xy 110.355071 89.602506) (xy 110.366884 89.612595) (xy 111.321184 90.566894) + (xy 112.269885 91.515595) (xy 112.269886 91.515597) (xy 112.340353 91.586064) (xy 112.340354 91.586064) + (xy 112.340355 91.586065) (xy 112.432421 91.6242) (xy 112.432422 91.6242) (xy 112.532078 91.6242) + (xy 112.629141 91.6242) (xy 112.687332 91.643107) (xy 112.699138 91.65319) (xy 112.780137 91.734189) + (xy 112.780139 91.73419) (xy 112.780141 91.734192) (xy 112.88286 91.793497) (xy 112.882861 91.793497) + (xy 112.882864 91.793499) (xy 112.997441 91.8242) (xy 112.997443 91.8242) (xy 113.116057 91.8242) + (xy 113.116059 91.8242) (xy 113.230636 91.793499) (xy 113.230638 91.793497) (xy 113.23064 91.793497) + (xy 113.333358 91.734192) (xy 113.333358 91.734191) (xy 113.333363 91.734189) (xy 113.417239 91.650313) + (xy 113.4214 91.643107) (xy 113.449646 91.594183) (xy 113.476549 91.547586) (xy 113.492394 91.488451) + (xy 113.525715 91.43714) (xy 113.582837 91.415213) (xy 113.641937 91.431048) (xy 113.658023 91.444073) + (xy 114.459614 92.245664) (xy 114.459617 92.245666) (xy 114.492465 92.267614) (xy 114.492466 92.267615) + (xy 114.607095 92.344209) (xy 114.6071 92.344211) (xy 114.607103 92.344213) (xy 114.689041 92.378152) + (xy 114.689042 92.378153) (xy 114.733858 92.396716) (xy 114.770984 92.412095) (xy 114.944958 92.4467) + (xy 114.944959 92.4467) (xy 117.348343 92.4467) (xy 117.406534 92.465607) (xy 117.418347 92.475696) + (xy 117.450215 92.507564) (xy 117.597703 92.606113) (xy 117.597704 92.606113) (xy 117.597705 92.606114) + (xy 117.607833 92.610309) (xy 117.761584 92.673994) (xy 117.935559 92.7086) (xy 117.93556 92.7086) + (xy 118.11294 92.7086) (xy 118.112941 92.7086) (xy 118.286916 92.673994) (xy 118.450797 92.606113) + (xy 118.598285 92.507564) (xy 118.630153 92.475696) (xy 118.68467 92.447919) (xy 118.700157 92.4467) + (xy 119.09185 92.4467) (xy 119.150041 92.465607) (xy 119.186005 92.515107) (xy 119.186105 92.515418) + (xy 119.19085 92.530187) (xy 119.19085 92.55272) (xy 119.223111 92.630606) (xy 119.224355 92.634476) + (xy 119.224288 92.65453) (xy 119.227198 92.68407) (xy 119.21615 92.739612) (xy 119.21615 92.906582) + (xy 119.225639 92.954286) (xy 119.218447 93.015048) (xy 119.176914 93.059977) (xy 119.128541 93.0726) + (xy 114.687709 93.0726) (xy 114.687701 93.072599) (xy 114.676178 93.072599) (xy 114.576523 93.072599) + (xy 114.522589 93.094939) (xy 114.484453 93.110734) (xy 114.413985 93.181202) (xy 114.413986 93.181203) + (xy 114.413985 93.181204) (xy 113.644284 93.950904) (xy 113.589767 93.978681) (xy 113.57428 93.9799) + (xy 113.459741 93.9799) (xy 113.391818 93.9981) (xy 113.345159 94.010602) (xy 113.242441 94.069907) + (xy 113.158557 94.153791) (xy 113.099252 94.256509) (xy 113.092478 94.28179) (xy 113.06855 94.371091) + (xy 113.06855 94.489709) (xy 113.090895 94.5731) (xy 113.099252 94.60429) (xy 113.158557 94.707008) + (xy 113.158559 94.70701) (xy 113.158561 94.707013) (xy 113.242437 94.790889) (xy 113.242439 94.79089) + (xy 113.242441 94.790892) (xy 113.34516 94.850197) (xy 113.345161 94.850197) (xy 113.345164 94.850199) + (xy 113.459741 94.8809) (xy 113.459743 94.8809) (xy 113.578357 94.8809) (xy 113.578359 94.8809) + (xy 113.692936 94.850199) (xy 113.692938 94.850197) (xy 113.69294 94.850197) (xy 113.795658 94.790892) + (xy 113.795658 94.790891) (xy 113.795663 94.790889) (xy 113.879539 94.707013) (xy 113.888448 94.691582) + (xy 113.938847 94.60429) (xy 113.938847 94.604288) (xy 113.938849 94.604286) (xy 113.96955 94.489709) + (xy 113.96955 94.375168) (xy 113.972018 94.36757) (xy 113.970769 94.359682) (xy 113.981292 94.339028) + (xy 113.988457 94.316977) (xy 113.998546 94.305165) (xy 114.042288 94.261422) (xy 114.096804 94.233644) + (xy 114.157236 94.243215) (xy 114.200501 94.286479) (xy 114.207916 94.305796) (xy 114.219618 94.349464) + (xy 114.226752 94.37609) (xy 114.286057 94.478808) (xy 114.286059 94.47881) (xy 114.286061 94.478813) + (xy 114.369937 94.562689) (xy 114.369939 94.56269) (xy 114.369941 94.562692) (xy 114.47266 94.621997) + (xy 114.472661 94.621997) (xy 114.472664 94.621999) (xy 114.587241 94.6527) (xy 114.587243 94.6527) + (xy 114.705857 94.6527) (xy 114.705859 94.6527) (xy 114.820436 94.621999) (xy 114.820438 94.621997) + (xy 114.82044 94.621997) (xy 114.923158 94.562692) (xy 114.923158 94.562691) (xy 114.923163 94.562689) + (xy 115.007039 94.478813) (xy 115.065884 94.376892) (xy 115.066347 94.37609) (xy 115.066347 94.376088) + (xy 115.066349 94.376086) (xy 115.09705 94.261509) (xy 115.09705 94.1726) (xy 115.115957 94.114409) + (xy 115.165457 94.078445) (xy 115.19605 94.0736) (xy 116.348732 94.0736) (xy 116.406923 94.092507) + (xy 116.442887 94.142007) (xy 116.442887 94.203193) (xy 116.434468 94.2221) (xy 116.411252 94.262309) + (xy 116.400521 94.302357) (xy 116.38055 94.376891) (xy 116.38055 94.495509) (xy 116.406541 94.592507) + (xy 116.411252 94.61009) (xy 116.470557 94.712808) (xy 116.470559 94.71281) (xy 116.470561 94.712813) + (xy 116.554437 94.796689) (xy 116.554439 94.79669) (xy 116.554441 94.796692) (xy 116.65716 94.855997) + (xy 116.657161 94.855997) (xy 116.657164 94.855999) (xy 116.771741 94.8867) (xy 116.771743 94.8867) + (xy 116.890357 94.8867) (xy 116.890359 94.8867) (xy 117.004936 94.855999) (xy 117.004938 94.855997) + (xy 117.00494 94.855997) (xy 117.107658 94.796692) (xy 117.107658 94.796691) (xy 117.107663 94.796689) + (xy 117.191539 94.712813) (xy 117.194891 94.707008) (xy 117.243336 94.6231) (xy 117.258713 94.609253) + (xy 117.270881 94.592507) (xy 117.280943 94.589237) (xy 117.288805 94.582159) (xy 117.329072 94.5736) + (xy 117.417733 94.5736) (xy 117.475924 94.592507) (xy 117.511888 94.642007) (xy 117.51336 94.698222) + (xy 117.502268 94.73962) (xy 117.50115 94.743791) (xy 117.50115 94.862409) (xy 117.512986 94.90658) + (xy 117.531852 94.97699) (xy 117.591157 95.079708) (xy 117.591159 95.07971) (xy 117.591161 95.079713) + (xy 117.675037 95.163589) (xy 117.675039 95.16359) (xy 117.699761 95.177864) (xy 117.740701 95.223334) + (xy 117.747096 95.284184) (xy 117.716503 95.337172) (xy 117.660607 95.362058) (xy 117.65026 95.3626) + (xy 113.533904 95.3626) (xy 113.475713 95.343693) (xy 113.4639 95.333604) (xy 109.712183 91.581887) + (xy 105.948119 87.817823) (xy 105.948115 87.81782) (xy 105.841576 87.746634) (xy 105.723197 87.6976) + (xy 105.723195 87.697599) (xy 105.723194 87.697599) (xy 105.597519 87.6726) (xy 103.817158 87.6726) + (xy 103.758967 87.653693) (xy 103.723003 87.604193) (xy 103.723003 87.543007) (xy 103.747154 87.503596) + (xy 106.699854 84.550896) (xy 106.754371 84.523119) (xy 106.769858 84.5219) (xy 109.530344 84.5219) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 105.835207 80.090507) (xy 105.871171 80.140007) (xy 105.871171 80.201193) (xy 105.835207 80.250693) - (xy 105.807609 80.264755) (xy 105.689204 80.303227) (xy 105.534864 80.381866) (xy 105.394723 80.483685) - (xy 105.272235 80.606173) (xy 105.170416 80.746314) (xy 105.091775 80.900658) (xy 105.091773 80.900661) - (xy 105.038248 81.065393) (xy 105.038247 81.065397) (xy 105.01115 81.236485) (xy 105.01115 81.409714) - (xy 105.038247 81.580802) (xy 105.038248 81.580806) (xy 105.091773 81.745538) (xy 105.091775 81.745541) - (xy 105.170416 81.899886) (xy 105.19579 81.934809) (xy 105.214697 81.993) (xy 105.19579 82.051191) - (xy 105.14629 82.087155) (xy 105.115697 82.092) (xy 105.005023 82.092) (xy 104.954093 82.105646) - (xy 104.903161 82.119293) (xy 104.842508 82.15431) (xy 104.842509 82.154311) (xy 104.811839 82.172018) - (xy 103.433707 83.55015) (xy 103.37919 83.577927) (xy 103.348712 83.5731) (xy 102.616651 83.5731) - (xy 102.61665 83.573101) (xy 102.61665 84.298098) (xy 102.616651 84.298099) (xy 102.63996 84.298099) - (xy 102.640136 84.298081) (xy 102.640172 84.298088) (xy 102.64249 84.297971) (xy 102.642521 84.298594) - (xy 102.69995 84.310966) (xy 102.740766 84.356548) (xy 102.745841 84.370943) (xy 102.768171 84.45428) - (xy 102.768171 84.454281) (xy 102.768173 84.454284) (xy 102.84723 84.591216) (xy 102.959034 84.70302) - (xy 103.095966 84.782077) (xy 103.248693 84.823) (xy 103.248695 84.823) (xy 103.406801 84.823) (xy 103.406807 84.823) - (xy 103.407556 84.822799) (xy 103.40811 84.822828) (xy 103.413239 84.822153) (xy 103.413364 84.823102) - (xy 103.468653 84.825994) (xy 103.516208 84.864494) (xy 103.532051 84.923592) (xy 103.510131 84.980716) - (xy 103.50319 84.988427) (xy 101.373015 87.118604) (xy 101.318498 87.146381) (xy 101.303011 87.1476) - (xy 101.298543 87.1476) (xy 101.210084 87.158223) (xy 101.06931 87.213737) (xy 101.069306 87.21374) - (xy 100.948731 87.305175) (xy 100.948725 87.305181) (xy 100.85729 87.425756) (xy 100.857287 87.42576) - (xy 100.801773 87.566534) (xy 100.79115 87.654993) (xy 100.79115 87.693789) (xy 100.774465 87.748791) - (xy 100.723212 87.825494) (xy 100.723208 87.825503) (xy 100.644019 88.016681) (xy 100.60365 88.219632) - (xy 100.60365 88.42657) (xy 100.610846 88.462746) (xy 100.603654 88.523507) (xy 100.562121 88.568437) - (xy 100.502111 88.580373) (xy 100.446546 88.554756) (xy 100.443744 88.552063) (xy 100.157394 88.265713) - (xy 100.129617 88.211196) (xy 100.130299 88.1764) (xy 100.155251 88.050965) (xy 100.155251 87.844034) - (xy 100.155251 87.839957) (xy 100.15525 87.839931) (xy 100.15525 85.023731) (xy 100.174157 84.96554) - (xy 100.223657 84.929576) (xy 100.27561 84.928218) (xy 100.275659 84.927853) (xy 100.277968 84.928157) - (xy 100.27988 84.928107) (xy 100.282093 84.9287) (xy 100.282095 84.9287) (xy 100.440205 84.9287) - (xy 100.440207 84.9287) (xy 100.592934 84.887777) (xy 100.729866 84.80872) (xy 100.84167 84.696916) - (xy 100.920727 84.559984) (xy 100.96165 84.407257) (xy 100.96165 84.3351) (xy 100.980557 84.276909) - (xy 100.99064 84.265102) (xy 101.13713 84.118613) (xy 101.137135 84.118603) (xy 101.140533 84.114176) - (xy 101.182758 84.082339) (xy 101.301625 84.035464) (xy 101.401037 83.960077) (xy 101.458828 83.939981) - (xy 101.517394 83.957692) (xy 101.545117 83.986987) (xy 101.569076 84.025829) (xy 101.569076 84.02583) - (xy 101.68892 84.145674) (xy 101.833162 84.234645) (xy 101.994046 84.287956) (xy 102.093326 84.298099) - (xy 102.11665 84.298098) (xy 102.11665 82.348101) (xy 102.61665 82.348101) (xy 102.61665 83.073099) - (xy 102.616651 83.0731) (xy 103.316648 83.0731) (xy 103.316649 83.073099) (xy 103.316649 83.024777) - (xy 103.306507 82.925502) (xy 103.306504 82.92549) (xy 103.253195 82.764612) (xy 103.164224 82.62037) - (xy 103.044379 82.500525) (xy 102.900137 82.411554) (xy 102.739253 82.358243) (xy 102.639973 82.3481) - (xy 102.616651 82.3481) (xy 102.61665 82.348101) (xy 102.11665 82.348101) (xy 102.11665 82.3481) - (xy 102.116649 82.348099) (xy 102.093339 82.3481) (xy 102.093334 82.348101) (xy 101.994051 82.358242) - (xy 101.99404 82.358245) (xy 101.833162 82.411554) (xy 101.68892 82.500525) (xy 101.569076 82.620369) - (xy 101.545115 82.659214) (xy 101.498472 82.698814) (xy 101.437462 82.703435) (xy 101.401038 82.686124) - (xy 101.301625 82.610736) (xy 101.301622 82.610734) (xy 101.167242 82.557741) (xy 101.099742 82.549635) - (xy 101.044221 82.523924) (xy 101.014416 82.470488) (xy 101.021712 82.40974) (xy 101.04154 82.38134) - (xy 101.620585 81.802296) (xy 101.675102 81.774519) (xy 101.690589 81.7733) (xy 102.979514 81.7733) - (xy 102.979515 81.7733) (xy 103.18247 81.73293) (xy 103.373648 81.653741) (xy 103.545705 81.538777) - (xy 103.692027 81.392455) (xy 103.806991 81.220398) (xy 103.88618 81.02922) (xy 103.92655 80.826265) - (xy 103.92655 80.619335) (xy 103.88618 80.41638) (xy 103.806991 80.225202) (xy 103.80699 80.2252) - (xy 103.806989 80.225198) (xy 103.804699 80.220913) (xy 103.805771 80.220339) (xy 103.790651 80.166704) - (xy 103.811834 80.109302) (xy 103.862711 80.075314) (xy 103.889574 80.0716) (xy 105.777016 80.0716) + (xy 113.271264 79.940507) (xy 113.307228 79.990007) (xy 113.307228 80.051193) (xy 113.271264 80.100693) + (xy 113.243666 80.114755) (xy 113.232622 80.118343) (xy 113.050303 80.211238) (xy 112.884758 80.331514) + (xy 112.740064 80.476208) (xy 112.619788 80.641753) (xy 112.526893 80.824072) (xy 112.463659 81.018685) + (xy 112.45504 81.073099) (xy 112.455041 81.0731) (xy 113.298638 81.0731) (xy 113.265725 81.130107) + (xy 113.23165 81.257274) (xy 113.23165 81.388926) (xy 113.265725 81.516093) (xy 113.298638 81.5731) + (xy 112.45504 81.5731) (xy 112.463659 81.627514) (xy 112.526893 81.822127) (xy 112.619788 82.004446) + (xy 112.740064 82.169991) (xy 112.884758 82.314685) (xy 113.050303 82.434961) (xy 113.232626 82.527858) + (xy 113.236217 82.529346) (xy 113.235815 82.530316) (xy 113.281777 82.563707) (xy 113.300686 82.621897) + (xy 113.28178 82.680088) (xy 113.232281 82.716054) (xy 113.201686 82.7209) (xy 108.108247 82.7209) + (xy 108.050056 82.701993) (xy 108.014092 82.652493) (xy 108.014092 82.591307) (xy 108.022511 82.5724) + (xy 108.074247 82.48279) (xy 108.074247 82.482788) (xy 108.074249 82.482786) (xy 108.10495 82.368209) + (xy 108.10495 82.273627) (xy 108.123857 82.215436) (xy 108.173357 82.179472) (xy 108.234543 82.179472) + (xy 108.241828 82.18216) (xy 108.374399 82.237073) (xy 108.558034 82.2736) (xy 108.558035 82.2736) + (xy 108.745265 82.2736) (xy 108.745266 82.2736) (xy 108.928901 82.237073) (xy 109.101881 82.165422) + (xy 109.101884 82.165419) (xy 109.101888 82.165418) (xy 109.147397 82.135009) (xy 109.257558 82.061402) + (xy 109.389952 81.929008) (xy 109.483486 81.789025) (xy 109.493968 81.773338) (xy 109.493969 81.773334) + (xy 109.493972 81.773331) (xy 109.565623 81.600351) (xy 109.60215 81.416716) (xy 109.60215 81.229484) + (xy 109.602149 81.229481) (xy 110.24115 81.229481) (xy 110.24115 81.416718) (xy 110.277676 81.600349) + (xy 110.349327 81.773329) (xy 110.349331 81.773338) (xy 110.405965 81.858095) (xy 110.453348 81.929008) + (xy 110.585742 82.061402) (xy 110.652113 82.105749) (xy 110.741411 82.165418) (xy 110.741417 82.16542) + (xy 110.741419 82.165422) (xy 110.914399 82.237073) (xy 111.098034 82.2736) (xy 111.098035 82.2736) + (xy 111.285265 82.2736) (xy 111.285266 82.2736) (xy 111.468901 82.237073) (xy 111.641881 82.165422) + (xy 111.641884 82.165419) (xy 111.641888 82.165418) (xy 111.687397 82.135009) (xy 111.797558 82.061402) + (xy 111.929952 81.929008) (xy 112.023486 81.789025) (xy 112.033968 81.773338) (xy 112.033969 81.773334) + (xy 112.033972 81.773331) (xy 112.105623 81.600351) (xy 112.14215 81.416716) (xy 112.14215 81.229484) + (xy 112.105623 81.045849) (xy 112.033972 80.872869) (xy 112.03397 80.872867) (xy 112.033968 80.872861) + (xy 111.96553 80.770439) (xy 111.929952 80.717192) (xy 111.797558 80.584798) (xy 111.74242 80.547956) + (xy 111.641888 80.480781) (xy 111.641879 80.480777) (xy 111.468899 80.409126) (xy 111.285268 80.3726) + (xy 111.285266 80.3726) (xy 111.098034 80.3726) (xy 111.098031 80.3726) (xy 110.9144 80.409126) + (xy 110.74142 80.480777) (xy 110.741411 80.480781) (xy 110.585742 80.584798) (xy 110.585738 80.584801) + (xy 110.453351 80.717188) (xy 110.453348 80.717192) (xy 110.349331 80.872861) (xy 110.349327 80.87287) + (xy 110.277676 81.04585) (xy 110.24115 81.229481) (xy 109.602149 81.229481) (xy 109.565623 81.045849) + (xy 109.493972 80.872869) (xy 109.49397 80.872867) (xy 109.493968 80.872861) (xy 109.42553 80.770439) + (xy 109.389952 80.717192) (xy 109.257558 80.584798) (xy 109.20242 80.547956) (xy 109.101888 80.480781) + (xy 109.101879 80.480777) (xy 108.928899 80.409126) (xy 108.745268 80.3726) (xy 108.745266 80.3726) + (xy 108.558034 80.3726) (xy 108.558031 80.3726) (xy 108.3744 80.409126) (xy 108.20142 80.480777) + (xy 108.201411 80.480781) (xy 108.045742 80.584798) (xy 108.045738 80.584801) (xy 107.913351 80.717188) + (xy 107.913348 80.717192) (xy 107.809331 80.872861) (xy 107.809327 80.87287) (xy 107.737676 81.04585) + (xy 107.70115 81.229481) (xy 107.70115 81.416718) (xy 107.737676 81.600349) (xy 107.737677 81.600351) + (xy 107.783009 81.709792) (xy 107.787865 81.721514) (xy 107.792666 81.782511) (xy 107.760696 81.83468) + (xy 107.704169 81.858095) (xy 107.696401 81.8584) (xy 107.595141 81.8584) (xy 107.525017 81.877189) + (xy 107.480559 81.889102) (xy 107.377841 81.948407) (xy 107.293957 82.032291) (xy 107.234652 82.135009) + (xy 107.234651 82.135014) (xy 107.225645 82.168624) (xy 107.192322 82.219937) (xy 107.1352 82.241864) + (xy 107.130019 82.242) (xy 106.773632 82.242) (xy 106.715441 82.223093) (xy 106.679477 82.173593) + (xy 106.679477 82.112407) (xy 106.714067 82.064796) (xy 106.713807 82.064479) (xy 106.715024 82.063479) + (xy 106.715441 82.062907) (xy 106.717312 82.061603) (xy 106.717548 82.061408) (xy 106.717558 82.061402) + (xy 106.849952 81.929008) (xy 106.943486 81.789025) (xy 106.953968 81.773338) (xy 106.953969 81.773334) + (xy 106.953972 81.773331) (xy 107.025623 81.600351) (xy 107.06215 81.416716) (xy 107.06215 81.229484) + (xy 107.025623 81.045849) (xy 106.953972 80.872869) (xy 106.95397 80.872867) (xy 106.953968 80.872861) + (xy 106.88553 80.770439) (xy 106.849952 80.717192) (xy 106.717558 80.584798) (xy 106.66242 80.547956) + (xy 106.561888 80.480781) (xy 106.561879 80.480777) (xy 106.388899 80.409126) (xy 106.205268 80.3726) + (xy 106.205266 80.3726) (xy 106.018034 80.3726) (xy 106.018031 80.3726) (xy 105.8344 80.409126) + (xy 105.66142 80.480777) (xy 105.661411 80.480781) (xy 105.505742 80.584798) (xy 105.505738 80.584801) + (xy 105.373351 80.717188) (xy 105.373348 80.717192) (xy 105.269331 80.872861) (xy 105.269327 80.87287) + (xy 105.197676 81.04585) (xy 105.16115 81.229481) (xy 105.16115 81.416718) (xy 105.197676 81.600349) + (xy 105.269327 81.773329) (xy 105.269331 81.773338) (xy 105.325965 81.858095) (xy 105.373348 81.929008) + (xy 105.505742 82.061402) (xy 105.505746 82.061405) (xy 105.509493 82.064479) (xy 105.508558 82.065618) + (xy 105.542548 82.108731) (xy 105.544952 82.169869) (xy 105.510961 82.220744) (xy 105.453558 82.241924) + (xy 105.449668 82.242) (xy 105.007921 82.242) (xy 104.915853 82.280135) (xy 103.484075 83.711911) + (xy 103.429559 83.739688) (xy 103.369127 83.730117) (xy 103.325862 83.686852) (xy 103.315585 83.631843) + (xy 103.31665 83.62142) (xy 103.31665 83.573101) (xy 103.316649 83.5731) (xy 102.616651 83.5731) + (xy 102.61665 83.573101) (xy 102.61665 84.298098) (xy 102.616651 84.298099) (xy 102.639972 84.298099) + (xy 102.739247 84.287957) (xy 102.739255 84.287955) (xy 102.767901 84.278463) (xy 102.829085 84.278107) + (xy 102.878794 84.313781) (xy 102.894667 84.346812) (xy 102.905572 84.387507) (xy 102.907952 84.39639) + (xy 102.967257 84.499108) (xy 102.967259 84.49911) (xy 102.967261 84.499113) (xy 103.051137 84.582989) + (xy 103.051139 84.58299) (xy 103.051141 84.582992) (xy 103.15386 84.642297) (xy 103.153861 84.642297) + (xy 103.153864 84.642299) (xy 103.268441 84.673) (xy 103.268443 84.673) (xy 103.387057 84.673) (xy 103.387059 84.673) + (xy 103.501636 84.642299) (xy 103.501638 84.642297) (xy 103.50164 84.642297) (xy 103.604358 84.582992) + (xy 103.604358 84.582991) (xy 103.604363 84.582989) (xy 103.688239 84.499113) (xy 103.710296 84.460909) + (xy 103.747547 84.39639) (xy 103.747547 84.396388) (xy 103.747549 84.396386) (xy 103.77825 84.281809) + (xy 103.77825 84.167268) (xy 103.797157 84.109077) (xy 103.807246 84.097264) (xy 105.132515 82.771996) + (xy 105.187032 82.744219) (xy 105.202519 82.743) (xy 105.723251 82.743) (xy 105.781442 82.761907) + (xy 105.817406 82.811407) (xy 105.817406 82.872593) (xy 105.784633 82.917699) (xy 105.785576 82.918848) + (xy 105.781822 82.921928) (xy 101.435144 87.268604) (xy 101.380627 87.296381) (xy 101.365142 87.2976) + (xy 101.310129 87.2976) (xy 101.310126 87.297601) (xy 101.21635 87.312452) (xy 101.216345 87.312454) + (xy 101.103309 87.370049) (xy 101.013599 87.459759) (xy 100.956004 87.572795) (xy 100.94115 87.666578) + (xy 100.94115 87.73929) (xy 100.924466 87.794291) (xy 100.856137 87.896553) (xy 100.788256 88.06043) + (xy 100.788254 88.060436) (xy 100.75365 88.234405) (xy 100.75365 88.411794) (xy 100.788254 88.585763) + (xy 100.788256 88.585769) (xy 100.856137 88.749646) (xy 100.924466 88.851909) (xy 100.941005 88.901558) + (xy 100.94115 88.904241) (xy 100.941151 88.979618) (xy 100.947349 89.018758) (xy 100.947626 89.023861) + (xy 100.941007 89.048733) (xy 100.93698 89.07416) (xy 100.933248 89.077891) (xy 100.931892 89.082989) + (xy 100.911917 89.09922) (xy 100.893714 89.117424) (xy 100.888502 89.118249) (xy 100.884409 89.121576) + (xy 100.858707 89.122967) (xy 100.833282 89.126994) (xy 100.828581 89.124598) (xy 100.823313 89.124884) + (xy 100.801706 89.110905) (xy 100.778767 89.099217) (xy 99.993716 88.314166) (xy 99.965939 88.259649) + (xy 99.971182 88.21541) (xy 99.969233 88.214819) (xy 99.970641 88.210174) (xy 99.970645 88.210166) + (xy 100.00525 88.036191) (xy 100.00525 87.858808) (xy 100.00525 84.814386) (xy 100.024157 84.756195) + (xy 100.073657 84.720231) (xy 100.134843 84.720231) (xy 100.15375 84.728649) (xy 100.187264 84.747999) + (xy 100.301841 84.7787) (xy 100.301843 84.7787) (xy 100.420457 84.7787) (xy 100.420459 84.7787) + (xy 100.535036 84.747999) (xy 100.535038 84.747997) (xy 100.53504 84.747997) (xy 100.637758 84.688692) + (xy 100.637758 84.688691) (xy 100.637763 84.688689) (xy 100.721639 84.604813) (xy 100.730014 84.590307) + (xy 100.780947 84.50209) (xy 100.780947 84.502088) (xy 100.780949 84.502086) (xy 100.81165 84.387509) + (xy 100.81165 84.272967) (xy 100.830557 84.214776) (xy 100.840647 84.202963) (xy 100.909545 84.134065) + (xy 101.029014 84.014597) (xy 101.03348 84.003814) (xy 101.073216 83.95729) (xy 101.110667 83.943736) + (xy 101.150275 83.937966) (xy 101.262861 83.882926) (xy 101.312876 83.83291) (xy 101.36739 83.805134) + (xy 101.427822 83.814705) (xy 101.471087 83.857969) (xy 101.476853 83.871775) (xy 101.480104 83.881587) + (xy 101.569075 84.025829) (xy 101.68892 84.145674) (xy 101.833162 84.234645) (xy 101.994046 84.287956) + (xy 102.093326 84.298099) (xy 102.11665 84.298098) (xy 102.11665 82.348101) (xy 102.61665 82.348101) + (xy 102.61665 83.073099) (xy 102.616651 83.0731) (xy 103.316648 83.0731) (xy 103.316649 83.073099) + (xy 103.316649 83.024777) (xy 103.306507 82.925502) (xy 103.306504 82.92549) (xy 103.253195 82.764612) + (xy 103.164224 82.62037) (xy 103.044379 82.500525) (xy 102.900137 82.411554) (xy 102.739253 82.358243) + (xy 102.639973 82.3481) (xy 102.616651 82.3481) (xy 102.61665 82.348101) (xy 102.11665 82.348101) + (xy 102.11665 82.3481) (xy 102.116649 82.348099) (xy 102.093339 82.3481) (xy 102.093334 82.348101) + (xy 101.994051 82.358242) (xy 101.99404 82.358245) (xy 101.833162 82.411554) (xy 101.68892 82.500525) + (xy 101.569075 82.62037) (xy 101.480103 82.764613) (xy 101.480103 82.764614) (xy 101.476852 82.774426) + (xy 101.4406 82.823715) (xy 101.3823 82.842282) (xy 101.32422 82.823035) (xy 101.312881 82.813294) + (xy 101.262861 82.763274) (xy 101.150275 82.708234) (xy 101.150276 82.708234) (xy 101.122195 82.704143) + (xy 101.077286 82.6976) (xy 100.752157 82.6976) (xy 100.693966 82.678693) (xy 100.658002 82.629193) + (xy 100.658002 82.568007) (xy 100.682153 82.528596) (xy 101.558453 81.652296) (xy 101.61297 81.624519) + (xy 101.628457 81.6233) (xy 102.96474 81.6233) (xy 102.964741 81.6233) (xy 103.138716 81.588694) + (xy 103.302597 81.520813) (xy 103.450085 81.422264) (xy 103.575514 81.296835) (xy 103.674063 81.149347) + (xy 103.741944 80.985466) (xy 103.77655 80.811491) (xy 103.77655 80.634109) (xy 103.741944 80.460134) + (xy 103.705462 80.372058) (xy 103.674064 80.296255) (xy 103.674064 80.296254) (xy 103.575514 80.148765) + (xy 103.517353 80.090604) (xy 103.489576 80.036087) (xy 103.499147 79.975655) (xy 103.542412 79.93239) + (xy 103.587357 79.9216) (xy 113.213073 79.9216) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 173.175341 74.255407) (xy 173.211305 74.304907) (xy 173.21615 74.3355) (xy 173.21615 75.54296) - (xy 173.216151 75.542963) (xy 173.219064 75.56809) (xy 173.242473 75.621106) (xy 173.264444 75.670865) - (xy 173.343885 75.750306) (xy 173.446659 75.795685) (xy 173.471785 75.7986) (xy 173.64271 75.798599) - (xy 173.700899 75.817506) (xy 173.736863 75.867006) (xy 173.736864 75.928191) (xy 173.7009 75.977691) - (xy 173.697711 75.979914) (xy 173.569805 76.065379) (xy 173.433929 76.201255) (xy 173.327171 76.361028) - (xy 173.327171 76.361029) (xy 173.253638 76.538555) (xy 173.253638 76.538557) (xy 173.21615 76.727019) - (xy 173.21615 76.727022) (xy 173.21615 76.919178) (xy 173.252325 77.101044) (xy 173.253638 77.107642) - (xy 173.253638 77.107644) (xy 173.327171 77.28517) (xy 173.327171 77.285171) (xy 173.433929 77.444944) - (xy 173.569805 77.58082) (xy 173.729577 77.687577) (xy 173.835945 77.731636) (xy 173.88247 77.771373) - (xy 173.896754 77.830867) (xy 173.873339 77.887395) (xy 173.835945 77.914564) (xy 173.729577 77.958622) - (xy 173.569805 78.065379) (xy 173.433929 78.201255) (xy 173.327171 78.361028) (xy 173.327171 78.361029) - (xy 173.253638 78.538555) (xy 173.253638 78.538557) (xy 173.21615 78.727019) (xy 173.21615 78.91918) - (xy 173.229987 78.98874) (xy 173.250229 79.090507) (xy 173.253638 79.107642) (xy 173.253638 79.107644) - (xy 173.327171 79.28517) (xy 173.327171 79.285171) (xy 173.433929 79.444944) (xy 173.569805 79.58082) - (xy 173.729577 79.687577) (xy 173.835945 79.731636) (xy 173.88247 79.771373) (xy 173.896754 79.830867) - (xy 173.873339 79.887395) (xy 173.835945 79.914564) (xy 173.729577 79.958622) (xy 173.569805 80.065379) - (xy 173.433929 80.201255) (xy 173.327171 80.361028) (xy 173.327171 80.361029) (xy 173.253638 80.538555) - (xy 173.253638 80.538557) (xy 173.21615 80.727019) (xy 173.21615 80.91918) (xy 173.236883 81.02341) - (xy 173.245359 81.066024) (xy 173.253638 81.107642) (xy 173.253638 81.107644) (xy 173.327171 81.28517) - (xy 173.327171 81.285171) (xy 173.433929 81.444944) (xy 173.569805 81.58082) (xy 173.729577 81.687577) - (xy 173.835945 81.731636) (xy 173.88247 81.771373) (xy 173.896754 81.830867) (xy 173.873339 81.887395) - (xy 173.835945 81.914564) (xy 173.729577 81.958622) (xy 173.569805 82.065379) (xy 173.433929 82.201255) - (xy 173.327171 82.361028) (xy 173.327171 82.361029) (xy 173.253638 82.538555) (xy 173.253638 82.538557) - (xy 173.21615 82.727019) (xy 173.21615 82.91918) (xy 173.253638 83.107642) (xy 173.253638 83.107644) - (xy 173.327171 83.28517) (xy 173.327171 83.285171) (xy 173.433929 83.444944) (xy 173.569805 83.58082) - (xy 173.729577 83.687577) (xy 173.835945 83.731636) (xy 173.88247 83.771373) (xy 173.896754 83.830867) - (xy 173.873339 83.887395) (xy 173.835945 83.914564) (xy 173.729577 83.958622) (xy 173.569805 84.065379) - (xy 173.433929 84.201255) (xy 173.327171 84.361028) (xy 173.327171 84.361029) (xy 173.253638 84.538555) - (xy 173.253638 84.538557) (xy 173.21615 84.727019) (xy 173.21615 84.91918) (xy 173.253638 85.107642) - (xy 173.253638 85.107644) (xy 173.327171 85.28517) (xy 173.327171 85.285171) (xy 173.433929 85.444944) - (xy 173.569805 85.58082) (xy 173.729577 85.687577) (xy 173.835945 85.731636) (xy 173.88247 85.771373) - (xy 173.896754 85.830867) (xy 173.873339 85.887395) (xy 173.835945 85.914564) (xy 173.729577 85.958622) - (xy 173.569805 86.065379) (xy 173.433929 86.201255) (xy 173.327171 86.361028) (xy 173.327171 86.361029) - (xy 173.253638 86.538555) (xy 173.253638 86.538557) (xy 173.21615 86.727019) (xy 173.21615 86.91918) - (xy 173.253638 87.107642) (xy 173.253638 87.107644) (xy 173.327397 87.285715) (xy 173.332198 87.346711) - (xy 173.300228 87.39888) (xy 173.2437 87.422295) (xy 173.235933 87.4226) (xy 155.942551 87.4226) - (xy 155.88436 87.403693) (xy 155.872547 87.393604) (xy 151.037233 82.55829) (xy 151.009456 82.503773) - (xy 151.019027 82.443341) (xy 151.062292 82.400076) (xy 151.076633 82.394135) (xy 151.234095 82.342973) - (xy 151.388438 82.264332) (xy 151.528578 82.162514) (xy 151.651064 82.040028) (xy 151.752882 81.899888) - (xy 151.831523 81.745545) (xy 151.831524 81.74554) (xy 151.831526 81.745538) (xy 151.885051 81.580806) - (xy 151.885052 81.580802) (xy 151.91215 81.409714) (xy 151.91215 81.236485) (xy 151.885052 81.065397) - (xy 151.885051 81.065393) (xy 151.831526 80.900661) (xy 151.831524 80.900658) (xy 151.831523 80.900657) - (xy 151.831523 80.900655) (xy 151.752882 80.746312) (xy 151.651064 80.606172) (xy 151.528578 80.483686) - (xy 151.388438 80.381868) (xy 151.388437 80.381867) (xy 151.388435 80.381866) (xy 151.234095 80.303227) - (xy 151.115691 80.264755) (xy 151.066191 80.228791) (xy 151.047284 80.1706) (xy 151.066191 80.112409) - (xy 151.115692 80.076445) (xy 151.146284 80.0716) (xy 163.98715 80.0716) (xy 164.045341 80.090507) - (xy 164.081305 80.140007) (xy 164.08615 80.1706) (xy 164.08615 80.638927) (xy 164.096558 80.717986) - (xy 164.09656 80.717997) (xy 164.104148 80.746314) (xy 164.130634 80.845163) (xy 164.161151 80.918838) - (xy 164.179081 80.949893) (xy 164.218798 81.018686) (xy 164.226982 81.03286) (xy 164.275524 81.096121) - (xy 164.275526 81.096123) (xy 164.27553 81.096128) (xy 164.368622 81.18922) (xy 164.368626 81.189223) - (xy 164.368628 81.189225) (xy 164.431889 81.237767) (xy 164.431893 81.23777) (xy 164.545907 81.303596) - (xy 164.545908 81.303596) (xy 164.545911 81.303598) (xy 164.619586 81.334115) (xy 164.746753 81.36819) - (xy 164.825824 81.3786) (xy 164.825825 81.3786) (xy 165.391655 81.3786) (xy 165.405744 81.377948) - (xy 165.419838 81.377297) (xy 165.5098 81.3517) (xy 165.570942 81.35396) (xy 165.572679 81.354807) - (xy 165.572738 81.354657) (xy 165.581291 81.35797) (xy 165.69165 81.3786) (xy 166.257475 81.3786) - (xy 166.257476 81.3786) (xy 166.336547 81.36819) (xy 166.463714 81.334115) (xy 166.537393 81.303596) - (xy 166.651407 81.23777) (xy 166.714678 81.18922) (xy 166.80777 81.096128) (xy 166.85632 81.032857) - (xy 166.922146 80.918843) (xy 166.952665 80.845164) (xy 166.98674 80.717997) (xy 166.991154 80.684463) - (xy 167.017493 80.629239) (xy 167.019263 80.627422) (xy 167.419762 80.226925) (xy 167.507355 80.095832) - (xy 167.567691 79.950168) (xy 167.59845 79.795533) (xy 167.59845 79.637868) (xy 167.59845 78.951467) - (xy 167.567691 78.796832) (xy 167.507355 78.651168) (xy 167.419761 78.520075) (xy 167.308275 78.408589) - (xy 167.177182 78.320995) (xy 167.177181 78.320994) (xy 167.177179 78.320993) (xy 167.031518 78.260659) - (xy 166.876885 78.2299) (xy 166.876883 78.2299) (xy 166.875435 78.2299) (xy 166.874805 78.229695) - (xy 166.872047 78.229424) (xy 166.872106 78.228818) (xy 166.817244 78.210993) (xy 166.78128 78.161493) - (xy 166.78128 78.100307) (xy 166.805431 78.060896) (xy 168.643227 76.223101) (xy 170.600832 74.265496) - (xy 170.655349 74.237719) (xy 170.670836 74.2365) (xy 173.11715 74.2365) + (xy 111.371971 74.564181) (xy 111.389995 74.584463) (xy 111.494511 74.740882) (xy 111.633868 74.880239) + (xy 111.797736 74.989732) (xy 111.979815 75.065151) (xy 112.173109 75.1036) (xy 112.17311 75.1036) + (xy 112.37019 75.1036) (xy 112.370191 75.1036) (xy 112.563485 75.065151) (xy 112.692234 75.011822) + (xy 112.725785 74.997925) (xy 112.786782 74.993124) (xy 112.833674 75.019385) (xy 113.216586 75.402297) + (xy 113.216585 75.402297) (xy 113.287053 75.472764) (xy 113.379121 75.5109) (xy 113.379122 75.5109) + (xy 165.589848 75.5109) (xy 165.648039 75.529807) (xy 165.684003 75.579307) (xy 165.684003 75.640493) + (xy 165.675584 75.6594) (xy 165.620152 75.755409) (xy 165.615058 75.774421) (xy 165.58945 75.869991) + (xy 165.58945 75.988609) (xy 165.597688 76.019352) (xy 165.620152 76.10319) (xy 165.679457 76.205908) + (xy 165.679459 76.20591) (xy 165.679461 76.205913) (xy 165.763337 76.289789) (xy 165.763339 76.28979) + (xy 165.763341 76.289792) (xy 165.86606 76.349097) (xy 165.866061 76.349097) (xy 165.866064 76.349099) + (xy 165.980641 76.3798) (xy 165.980643 76.3798) (xy 166.099258 76.3798) (xy 166.099259 76.3798) + (xy 166.200329 76.352718) (xy 166.26143 76.355919) (xy 166.30898 76.394424) (xy 166.324816 76.453525) + (xy 166.30289 76.510646) (xy 166.295956 76.518348) (xy 164.38637 78.427934) (xy 164.328214 78.514973) + (xy 164.315183 78.534475) (xy 164.304824 78.559486) (xy 164.265087 78.606012) (xy 164.21336 78.6206) + (xy 107.439318 78.6206) (xy 107.381127 78.601693) (xy 107.345163 78.552193) (xy 107.345163 78.491007) + (xy 107.369312 78.451598) (xy 108.043819 77.777091) (xy 162.88285 77.777091) (xy 162.88285 77.895709) + (xy 162.896913 77.948193) (xy 162.913552 78.01029) (xy 162.972857 78.113008) (xy 162.972859 78.11301) + (xy 162.972861 78.113013) (xy 163.056737 78.196889) (xy 163.056739 78.19689) (xy 163.056741 78.196892) + (xy 163.15946 78.256197) (xy 163.159461 78.256197) (xy 163.159464 78.256199) (xy 163.274041 78.2869) + (xy 163.274043 78.2869) (xy 163.392657 78.2869) (xy 163.392659 78.2869) (xy 163.507236 78.256199) + (xy 163.507238 78.256197) (xy 163.50724 78.256197) (xy 163.609958 78.196892) (xy 163.609958 78.196891) + (xy 163.609963 78.196889) (xy 163.693839 78.113013) (xy 163.706231 78.09155) (xy 163.753147 78.01029) + (xy 163.753147 78.010288) (xy 163.753149 78.010286) (xy 163.78385 77.895709) (xy 163.78385 77.777091) + (xy 163.753149 77.662514) (xy 163.753147 77.662511) (xy 163.753147 77.662509) (xy 163.693842 77.559791) + (xy 163.69384 77.559789) (xy 163.693839 77.559787) (xy 163.609963 77.475911) (xy 163.60996 77.475909) + (xy 163.609958 77.475907) (xy 163.507239 77.416602) (xy 163.50724 77.416602) (xy 163.493701 77.412974) + (xy 163.392659 77.3859) (xy 163.274041 77.3859) (xy 163.203917 77.404689) (xy 163.159459 77.416602) + (xy 163.056741 77.475907) (xy 162.972857 77.559791) (xy 162.913552 77.662509) (xy 162.913551 77.662514) + (xy 162.88285 77.777091) (xy 108.043819 77.777091) (xy 111.214014 74.606897) (xy 111.216214 74.601584) + (xy 111.255947 74.555057) (xy 111.315441 74.54077) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 111.337174 74.79261) (xy 111.372322 74.82263) (xy 111.390867 74.848156) (xy 111.394097 74.852601) - (xy 111.522149 74.980653) (xy 111.668656 75.087096) (xy 111.830011 75.169311) (xy 112.002241 75.225271) - (xy 112.067538 75.235613) (xy 112.181101 75.2536) (xy 112.181104 75.2536) (xy 112.362199 75.2536) - (xy 112.541054 75.225272) (xy 112.541055 75.225271) (xy 112.541059 75.225271) (xy 112.699504 75.17379) - (xy 112.760687 75.17379) (xy 112.800098 75.197941) (xy 113.10847 75.506313) (xy 113.108469 75.506313) - (xy 113.149613 75.547456) (xy 113.183037 75.58088) (xy 113.274363 75.633607) (xy 113.376223 75.6609) - (xy 165.361165 75.6609) (xy 165.419356 75.679807) (xy 165.45532 75.729307) (xy 165.456791 75.785521) - (xy 165.43945 75.850243) (xy 165.43945 76.008357) (xy 165.480373 76.161084) (xy 165.55943 76.298016) - (xy 165.671234 76.40982) (xy 165.808166 76.488877) (xy 165.883183 76.508977) (xy 165.934496 76.542301) - (xy 165.956423 76.599423) (xy 165.940587 76.658523) (xy 165.927563 76.674608) (xy 164.381361 78.220811) - (xy 164.269864 78.332307) (xy 164.269861 78.332311) (xy 164.223168 78.402193) (xy 164.206858 78.426602) - (xy 164.158808 78.464481) (xy 164.124543 78.4706) (xy 163.787393 78.4706) (xy 163.729202 78.451693) - (xy 163.693238 78.402193) (xy 163.693238 78.341007) (xy 163.717387 78.301598) (xy 163.81387 78.205116) - (xy 163.892927 78.068184) (xy 163.93385 77.915457) (xy 163.93385 77.757343) (xy 163.892927 77.604616) - (xy 163.81387 77.467684) (xy 163.702066 77.35588) (xy 163.565134 77.276823) (xy 163.412407 77.2359) - (xy 163.254293 77.2359) (xy 163.101566 77.276823) (xy 162.964634 77.35588) (xy 162.85283 77.467684) - (xy 162.773773 77.604616) (xy 162.73285 77.757343) (xy 162.73285 77.915457) (xy 162.773773 78.068184) - (xy 162.85283 78.205116) (xy 162.949312 78.301598) (xy 162.977088 78.356113) (xy 162.967517 78.416545) - (xy 162.924252 78.45981) (xy 162.879307 78.4706) (xy 107.801451 78.4706) (xy 107.74326 78.451693) - (xy 107.707296 78.402193) (xy 107.707296 78.341007) (xy 107.731447 78.301596) (xy 108.592372 77.440671) - (xy 111.222227 74.810814) (xy 111.276742 74.783039) + (xy 170.012289 72.687207) (xy 170.048253 72.736707) (xy 170.048253 72.797893) (xy 170.012289 72.847393) + (xy 169.991986 72.858762) (xy 169.991252 72.859066) (xy 169.990122 72.859535) (xy 169.883584 72.93072) + (xy 166.628998 76.185306) (xy 166.574481 76.213083) (xy 166.514049 76.203512) (xy 166.470784 76.160247) + (xy 166.461213 76.099815) (xy 166.463368 76.089678) (xy 166.468581 76.070225) (xy 166.49045 75.988609) + (xy 166.49045 75.869991) (xy 166.481214 75.835522) (xy 166.484417 75.774421) (xy 166.522922 75.726871) + (xy 166.576841 75.7109) (xy 166.586357 75.7109) (xy 166.586359 75.7109) (xy 166.700936 75.680199) + (xy 166.700938 75.680197) (xy 166.70094 75.680197) (xy 166.803658 75.620892) (xy 166.803658 75.620891) + (xy 166.803663 75.620889) (xy 166.887539 75.537013) (xy 166.887542 75.537008) (xy 166.946847 75.43429) + (xy 166.946847 75.434288) (xy 166.946849 75.434286) (xy 166.97755 75.319709) (xy 166.97755 75.201091) + (xy 166.946849 75.086514) (xy 166.946847 75.086511) (xy 166.946847 75.086509) (xy 166.887542 74.983791) + (xy 166.88754 74.983789) (xy 166.887539 74.983787) (xy 166.803663 74.899911) (xy 166.80366 74.899909) + (xy 166.803658 74.899907) (xy 166.700939 74.840602) (xy 166.70094 74.840602) (xy 166.687401 74.836974) + (xy 166.586359 74.8099) (xy 166.467741 74.8099) (xy 166.397617 74.828689) (xy 166.353159 74.840602) + (xy 166.250441 74.899907) (xy 166.25044 74.899908) (xy 166.250437 74.89991) (xy 166.250437 74.899911) + (xy 166.169442 74.980905) (xy 166.114928 75.008681) (xy 166.099441 75.0099) (xy 156.198779 75.0099) + (xy 156.140588 74.990993) (xy 156.104624 74.941493) (xy 156.104624 74.880307) (xy 156.128775 74.840896) + (xy 156.16509 74.804581) (xy 156.228789 74.740882) (xy 156.338282 74.577014) (xy 156.413701 74.394935) + (xy 156.45215 74.201641) (xy 156.45215 74.004559) (xy 156.413701 73.811265) (xy 156.338282 73.629186) + (xy 156.228789 73.465318) (xy 156.089432 73.325961) (xy 155.960606 73.239882) (xy 155.925563 73.216467) + (xy 155.743485 73.141049) (xy 155.550193 73.1026) (xy 155.550191 73.1026) (xy 155.353109 73.1026) + (xy 155.353106 73.1026) (xy 155.159815 73.141049) (xy 155.159813 73.141049) (xy 154.977736 73.216467) + (xy 154.813868 73.325961) (xy 154.813864 73.325964) (xy 154.674514 73.465314) (xy 154.674511 73.465318) + (xy 154.565017 73.629186) (xy 154.489599 73.811263) (xy 154.454486 73.987784) (xy 154.424589 74.041167) + (xy 154.369023 74.066783) (xy 154.309014 74.054846) (xy 154.267481 74.009916) (xy 154.259607 73.983956) + (xy 154.228409 73.786978) (xy 154.162745 73.584884) (xy 154.066273 73.395546) (xy 154.066269 73.39554) + (xy 154.02692 73.341382) (xy 154.026919 73.341382) (xy 153.394612 73.97369) (xy 153.377575 73.910107) + (xy 153.311749 73.796093) (xy 153.218657 73.703001) (xy 153.104643 73.637175) (xy 153.041057 73.620137) + (xy 153.673366 72.987829) (xy 153.673366 72.987828) (xy 153.619209 72.94848) (xy 153.619203 72.948476) + (xy 153.436745 72.85551) (xy 153.39348 72.812245) (xy 153.383909 72.751813) (xy 153.411686 72.697297) + (xy 153.466203 72.669519) (xy 153.48169 72.6683) (xy 169.954098 72.6683) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 160.33034 68.714807) (xy 160.366304 68.764307) (xy 160.366304 68.825493) (xy 160.342153 68.864904) - (xy 157.686253 71.520804) (xy 157.631736 71.548581) (xy 157.616249 71.5498) (xy 117.017177 71.5498) - (xy 116.911723 71.5498) (xy 116.850889 71.5661) (xy 116.809857 71.577094) (xy 116.718541 71.629816) - (xy 116.718536 71.62982) (xy 115.340096 73.008258) (xy 115.28558 73.036035) (xy 115.239501 73.032409) - (xy 115.081056 72.980928) (xy 114.902199 72.9526) (xy 114.902196 72.9526) (xy 114.721104 72.9526) - (xy 114.721101 72.9526) (xy 114.542243 72.980928) (xy 114.370012 73.036888) (xy 114.208658 73.119102) - (xy 114.169503 73.14755) (xy 114.062149 73.225547) (xy 113.934097 73.353599) (xy 113.925915 73.364861) - (xy 113.827652 73.500108) (xy 113.745438 73.661462) (xy 113.689478 73.833693) (xy 113.66115 74.01255) - (xy 113.66115 74.193649) (xy 113.689478 74.372506) (xy 113.745437 74.544735) (xy 113.745439 74.544739) - (xy 113.827652 74.706091) (xy 113.82954 74.709171) (xy 113.832309 74.720707) (xy 113.839284 74.730307) - (xy 113.839284 74.749756) (xy 113.843824 74.768666) (xy 113.839284 74.779626) (xy 113.839284 74.791493) - (xy 113.827851 74.807228) (xy 113.82041 74.825194) (xy 113.810295 74.831392) (xy 113.80332 74.840993) - (xy 113.784822 74.847003) (xy 113.768242 74.857164) (xy 113.745129 74.8599) (xy 113.635851 74.8599) - (xy 113.57766 74.840993) (xy 113.565847 74.830904) (xy 113.366491 74.631548) (xy 113.338714 74.577031) - (xy 113.342339 74.530954) (xy 113.393821 74.372509) (xy 113.412368 74.255407) (xy 113.42215 74.193649) - (xy 113.42215 74.01255) (xy 113.393821 73.833693) (xy 113.393821 73.833691) (xy 113.337861 73.661461) - (xy 113.255646 73.500106) (xy 113.149203 73.353599) (xy 113.021151 73.225547) (xy 112.874644 73.119104) - (xy 112.874643 73.119103) (xy 112.874641 73.119102) (xy 112.713287 73.036888) (xy 112.541059 72.980929) - (xy 112.521422 72.977818) (xy 112.466907 72.950038) (xy 112.439131 72.89552) (xy 112.448705 72.835089) - (xy 112.466906 72.810036) (xy 115.803447 69.473496) (xy 115.857964 69.445719) (xy 115.873451 69.4445) - (xy 147.171506 69.4445) (xy 147.229697 69.463407) (xy 147.241509 69.473496) (xy 147.27547 69.507456) - (xy 147.292534 69.52452) (xy 147.429466 69.603577) (xy 147.582193 69.6445) (xy 147.582195 69.6445) - (xy 147.740305 69.6445) (xy 147.740307 69.6445) (xy 147.893034 69.603577) (xy 148.029966 69.52452) - (xy 148.14177 69.412716) (xy 148.220827 69.275784) (xy 148.26175 69.123057) (xy 148.26175 68.964943) - (xy 148.223052 68.82052) (xy 148.226254 68.759422) (xy 148.26476 68.711872) (xy 148.318679 68.6959) - (xy 160.272149 68.6959) + (xy 160.692473 68.564807) (xy 160.728437 68.614307) (xy 160.728437 68.675493) (xy 160.704286 68.714903) + (xy 159.223685 70.195504) (xy 157.748385 71.670804) (xy 157.693868 71.698581) (xy 157.678381 71.6998) + (xy 116.914621 71.6998) (xy 116.822553 71.737935) (xy 115.373672 73.186814) (xy 115.319156 73.214591) + (xy 115.265784 73.208274) (xy 115.103485 73.141049) (xy 114.910193 73.1026) (xy 114.910191 73.1026) + (xy 114.713109 73.1026) (xy 114.713106 73.1026) (xy 114.519815 73.141049) (xy 114.519813 73.141049) + (xy 114.337736 73.216467) (xy 114.173868 73.325961) (xy 114.173864 73.325964) (xy 114.034514 73.465314) + (xy 114.034511 73.465318) (xy 113.925017 73.629186) (xy 113.849599 73.811263) (xy 113.849599 73.811265) + (xy 113.81115 74.004556) (xy 113.81115 74.201643) (xy 113.819773 74.244992) (xy 113.849494 74.394409) + (xy 113.849599 74.394934) (xy 113.849599 74.394936) (xy 113.925017 74.577013) (xy 113.929995 74.584463) + (xy 114.034511 74.740882) (xy 114.034514 74.740885) (xy 114.134525 74.840896) (xy 114.162302 74.895413) + (xy 114.152731 74.955845) (xy 114.109466 74.99911) (xy 114.064521 75.0099) (xy 113.573719 75.0099) + (xy 113.515528 74.990993) (xy 113.503715 74.980904) (xy 113.187935 74.665124) (xy 113.160158 74.610607) + (xy 113.166475 74.557235) (xy 113.190894 74.49828) (xy 113.233701 74.394935) (xy 113.27215 74.201641) + (xy 113.27215 74.004559) (xy 113.233701 73.811265) (xy 113.158282 73.629186) (xy 113.048789 73.465318) + (xy 112.909432 73.325961) (xy 112.780606 73.239882) (xy 112.745563 73.216467) (xy 112.563485 73.141049) + (xy 112.370193 73.1026) (xy 112.370191 73.1026) (xy 112.201218 73.1026) (xy 112.143027 73.083693) + (xy 112.107063 73.034193) (xy 112.107063 72.973007) (xy 112.131214 72.933596) (xy 115.741314 69.323496) + (xy 115.795831 69.295719) (xy 115.811318 69.2945) (xy 147.233641 69.2945) (xy 147.291832 69.313407) + (xy 147.303638 69.32349) (xy 147.384637 69.404489) (xy 147.384639 69.40449) (xy 147.384641 69.404492) + (xy 147.48736 69.463797) (xy 147.487361 69.463797) (xy 147.487364 69.463799) (xy 147.601941 69.4945) + (xy 147.601943 69.4945) (xy 147.720557 69.4945) (xy 147.720559 69.4945) (xy 147.835136 69.463799) + (xy 147.835138 69.463797) (xy 147.83514 69.463797) (xy 147.937858 69.404492) (xy 147.937858 69.404491) + (xy 147.937863 69.404489) (xy 148.021739 69.320613) (xy 148.021742 69.320608) (xy 148.081047 69.21789) + (xy 148.081047 69.217888) (xy 148.081049 69.217886) (xy 148.11175 69.103309) (xy 148.11175 68.984691) + (xy 148.081049 68.870114) (xy 148.081047 68.870111) (xy 148.081047 68.870109) (xy 148.021742 68.767391) + (xy 148.02174 68.767389) (xy 148.021739 68.767387) (xy 147.969253 68.714901) (xy 147.941478 68.660387) + (xy 147.951049 68.599955) (xy 147.994314 68.55669) (xy 148.039259 68.5459) (xy 160.634282 68.5459) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 152.136768 72.837207) (xy 152.172732 72.886707) (xy 152.172732 72.947893) (xy 152.150687 72.978235) - (xy 152.149932 72.987828) (xy 152.782241 73.620137) (xy 152.718657 73.637175) (xy 152.604643 73.703001) - (xy 152.511551 73.796093) (xy 152.445725 73.910107) (xy 152.428687 73.973691) (xy 151.796378 73.341382) - (xy 151.757028 73.395542) (xy 151.757026 73.395546) (xy 151.660554 73.584884) (xy 151.630922 73.676084) - (xy 151.594958 73.725584) (xy 151.536767 73.744491) (xy 151.478576 73.725584) (xy 151.442612 73.676084) - (xy 151.442612 73.676083) (xy 151.441474 73.672583) (xy 151.437861 73.661461) (xy 151.355646 73.500106) - (xy 151.249203 73.353599) (xy 151.121151 73.225547) (xy 150.974644 73.119104) (xy 150.974643 73.119103) - (xy 150.974641 73.119102) (xy 150.813287 73.036888) (xy 150.73501 73.011455) (xy 150.68551 72.975491) - (xy 150.666602 72.917301) (xy 150.685509 72.85911) (xy 150.735009 72.823146) (xy 150.765602 72.8183) - (xy 152.078577 72.8183) + (xy 152.399801 72.687207) (xy 152.435765 72.736707) (xy 152.435765 72.797893) (xy 152.399801 72.847393) + (xy 152.386555 72.85551) (xy 152.204096 72.948476) (xy 152.204092 72.948478) (xy 152.149932 72.987828) + (xy 152.782241 73.620137) (xy 152.718657 73.637175) (xy 152.604643 73.703001) (xy 152.511551 73.796093) + (xy 152.445725 73.910107) (xy 152.428687 73.973691) (xy 151.796378 73.341382) (xy 151.757028 73.395542) + (xy 151.757026 73.395546) (xy 151.660554 73.584884) (xy 151.59489 73.786978) (xy 151.563692 73.983956) + (xy 151.535914 74.038473) (xy 151.481398 74.06625) (xy 151.420966 74.056679) (xy 151.377701 74.013414) + (xy 151.368813 73.987783) (xy 151.360642 73.946704) (xy 151.333701 73.811265) (xy 151.258282 73.629186) + (xy 151.148789 73.465318) (xy 151.009432 73.325961) (xy 150.880606 73.239882) (xy 150.845563 73.216467) + (xy 150.663485 73.141049) (xy 150.470193 73.1026) (xy 150.470191 73.1026) (xy 150.273109 73.1026) + (xy 150.273106 73.1026) (xy 150.079815 73.141049) (xy 150.079813 73.141049) (xy 149.897736 73.216467) + (xy 149.733868 73.325961) (xy 149.733864 73.325964) (xy 149.594514 73.465314) (xy 149.594511 73.465318) + (xy 149.485017 73.629186) (xy 149.409599 73.811263) (xy 149.409599 73.811265) (xy 149.37115 74.004556) + (xy 149.37115 74.201643) (xy 149.379773 74.244992) (xy 149.409494 74.394409) (xy 149.409599 74.394934) + (xy 149.409599 74.394936) (xy 149.485017 74.577013) (xy 149.489995 74.584463) (xy 149.594511 74.740882) + (xy 149.594514 74.740885) (xy 149.694525 74.840896) (xy 149.722302 74.895413) (xy 149.712731 74.955845) + (xy 149.669466 74.99911) (xy 149.624521 75.0099) (xy 148.578779 75.0099) (xy 148.520588 74.990993) + (xy 148.484624 74.941493) (xy 148.484624 74.880307) (xy 148.508775 74.840896) (xy 148.54509 74.804581) + (xy 148.608789 74.740882) (xy 148.718282 74.577014) (xy 148.793701 74.394935) (xy 148.83215 74.201641) + (xy 148.83215 74.004559) (xy 148.793701 73.811265) (xy 148.718282 73.629186) (xy 148.608789 73.465318) + (xy 148.469432 73.325961) (xy 148.340606 73.239882) (xy 148.305563 73.216467) (xy 148.123485 73.141049) + (xy 147.930193 73.1026) (xy 147.930191 73.1026) (xy 147.733109 73.1026) (xy 147.733106 73.1026) + (xy 147.539815 73.141049) (xy 147.539813 73.141049) (xy 147.357736 73.216467) (xy 147.193868 73.325961) + (xy 147.193864 73.325964) (xy 147.054514 73.465314) (xy 147.054511 73.465318) (xy 146.945017 73.629186) + (xy 146.869599 73.811263) (xy 146.869599 73.811265) (xy 146.83115 74.004556) (xy 146.83115 74.201643) + (xy 146.839773 74.244992) (xy 146.869494 74.394409) (xy 146.869599 74.394934) (xy 146.869599 74.394936) + (xy 146.945017 74.577013) (xy 146.949995 74.584463) (xy 147.054511 74.740882) (xy 147.054514 74.740885) + (xy 147.154525 74.840896) (xy 147.182302 74.895413) (xy 147.172731 74.955845) (xy 147.129466 74.99911) + (xy 147.084521 75.0099) (xy 146.038779 75.0099) (xy 145.980588 74.990993) (xy 145.944624 74.941493) + (xy 145.944624 74.880307) (xy 145.968775 74.840896) (xy 146.00509 74.804581) (xy 146.068789 74.740882) + (xy 146.178282 74.577014) (xy 146.253701 74.394935) (xy 146.29215 74.201641) (xy 146.29215 74.004559) + (xy 146.253701 73.811265) (xy 146.178282 73.629186) (xy 146.068789 73.465318) (xy 145.929432 73.325961) + (xy 145.800606 73.239882) (xy 145.765563 73.216467) (xy 145.583485 73.141049) (xy 145.390193 73.1026) + (xy 145.390191 73.1026) (xy 145.193109 73.1026) (xy 145.193106 73.1026) (xy 144.999815 73.141049) + (xy 144.999813 73.141049) (xy 144.817736 73.216467) (xy 144.653868 73.325961) (xy 144.653864 73.325964) + (xy 144.514514 73.465314) (xy 144.514511 73.465318) (xy 144.405017 73.629186) (xy 144.329599 73.811263) + (xy 144.329599 73.811265) (xy 144.29115 74.004556) (xy 144.29115 74.201643) (xy 144.299773 74.244992) + (xy 144.329494 74.394409) (xy 144.329599 74.394934) (xy 144.329599 74.394936) (xy 144.405017 74.577013) + (xy 144.409995 74.584463) (xy 144.514511 74.740882) (xy 144.514514 74.740885) (xy 144.614525 74.840896) + (xy 144.642302 74.895413) (xy 144.632731 74.955845) (xy 144.589466 74.99911) (xy 144.544521 75.0099) + (xy 143.498779 75.0099) (xy 143.440588 74.990993) (xy 143.404624 74.941493) (xy 143.404624 74.880307) + (xy 143.428775 74.840896) (xy 143.46509 74.804581) (xy 143.528789 74.740882) (xy 143.638282 74.577014) + (xy 143.713701 74.394935) (xy 143.75215 74.201641) (xy 143.75215 74.004559) (xy 143.713701 73.811265) + (xy 143.638282 73.629186) (xy 143.528789 73.465318) (xy 143.389432 73.325961) (xy 143.260606 73.239882) + (xy 143.225563 73.216467) (xy 143.043485 73.141049) (xy 142.850193 73.1026) (xy 142.850191 73.1026) + (xy 142.653109 73.1026) (xy 142.653106 73.1026) (xy 142.459815 73.141049) (xy 142.459813 73.141049) + (xy 142.277736 73.216467) (xy 142.113868 73.325961) (xy 142.113864 73.325964) (xy 141.974514 73.465314) + (xy 141.974511 73.465318) (xy 141.865017 73.629186) (xy 141.789599 73.811263) (xy 141.789599 73.811265) + (xy 141.75115 74.004556) (xy 141.75115 74.201643) (xy 141.759773 74.244992) (xy 141.789494 74.394409) + (xy 141.789599 74.394934) (xy 141.789599 74.394936) (xy 141.865017 74.577013) (xy 141.869995 74.584463) + (xy 141.974511 74.740882) (xy 141.974514 74.740885) (xy 142.074525 74.840896) (xy 142.102302 74.895413) + (xy 142.092731 74.955845) (xy 142.049466 74.99911) (xy 142.004521 75.0099) (xy 140.958779 75.0099) + (xy 140.900588 74.990993) (xy 140.864624 74.941493) (xy 140.864624 74.880307) (xy 140.888775 74.840896) + (xy 140.92509 74.804581) (xy 140.988789 74.740882) (xy 141.098282 74.577014) (xy 141.173701 74.394935) + (xy 141.21215 74.201641) (xy 141.21215 74.004559) (xy 141.173701 73.811265) (xy 141.098282 73.629186) + (xy 140.988789 73.465318) (xy 140.849432 73.325961) (xy 140.720606 73.239882) (xy 140.685563 73.216467) + (xy 140.503485 73.141049) (xy 140.310193 73.1026) (xy 140.310191 73.1026) (xy 140.113109 73.1026) + (xy 140.113106 73.1026) (xy 139.919815 73.141049) (xy 139.919813 73.141049) (xy 139.737736 73.216467) + (xy 139.573868 73.325961) (xy 139.573864 73.325964) (xy 139.434514 73.465314) (xy 139.434511 73.465318) + (xy 139.325017 73.629186) (xy 139.249599 73.811263) (xy 139.249599 73.811265) (xy 139.21115 74.004556) + (xy 139.21115 74.201643) (xy 139.219773 74.244992) (xy 139.249494 74.394409) (xy 139.249599 74.394934) + (xy 139.249599 74.394936) (xy 139.325017 74.577013) (xy 139.329995 74.584463) (xy 139.434511 74.740882) + (xy 139.434514 74.740885) (xy 139.534525 74.840896) (xy 139.562302 74.895413) (xy 139.552731 74.955845) + (xy 139.509466 74.99911) (xy 139.464521 75.0099) (xy 138.418779 75.0099) (xy 138.360588 74.990993) + (xy 138.324624 74.941493) (xy 138.324624 74.880307) (xy 138.348775 74.840896) (xy 138.38509 74.804581) + (xy 138.448789 74.740882) (xy 138.558282 74.577014) (xy 138.633701 74.394935) (xy 138.67215 74.201641) + (xy 138.67215 74.004559) (xy 138.633701 73.811265) (xy 138.566473 73.648963) (xy 138.561673 73.587968) + (xy 138.587935 73.541075) (xy 139.431716 72.697296) (xy 139.486232 72.669519) (xy 139.501719 72.6683) + (xy 152.34161 72.6683) ) ) (filled_polygon (layer "F.Cu") (pts - (xy 155.115889 72.837207) (xy 155.151853 72.886707) (xy 155.151853 72.947893) (xy 155.115889 72.997393) - (xy 155.08829 73.011455) (xy 155.010012 73.036888) (xy 154.848658 73.119102) (xy 154.809503 73.14755) - (xy 154.702149 73.225547) (xy 154.574097 73.353599) (xy 154.565915 73.364861) (xy 154.467652 73.500108) - (xy 154.385437 73.661464) (xy 154.385436 73.661466) (xy 154.380685 73.676088) (xy 154.344719 73.725586) - (xy 154.286528 73.744491) (xy 154.228338 73.725581) (xy 154.192377 73.676083) (xy 154.162746 73.584886) - (xy 154.066273 73.395546) (xy 154.066269 73.39554) (xy 154.02692 73.341382) (xy 154.026919 73.341382) - (xy 153.394612 73.97369) (xy 153.377575 73.910107) (xy 153.311749 73.796093) (xy 153.218657 73.703001) - (xy 153.104643 73.637175) (xy 153.041057 73.620137) (xy 153.673366 72.987829) (xy 153.672611 72.978236) - (xy 153.650566 72.947892) (xy 153.650567 72.886706) (xy 153.686531 72.837207) (xy 153.744721 72.8183) - (xy 155.057698 72.8183) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 87.9137 51.516007) (xy 87.949664 51.565507) (xy 87.953803 51.607905) (xy 87.95115 51.629992) - (xy 87.95115 57.0162) (xy 87.951151 57.01621) (xy 87.961773 57.104666) (xy 87.961774 57.104672) - (xy 88.017287 57.245442) (xy 88.068086 57.31243) (xy 88.108727 57.366023) (xy 88.20197 57.436731) - (xy 88.236911 57.486956) (xy 88.24115 57.515614) (xy 88.24115 60.2736) (xy 88.222243 60.331791) - (xy 88.172743 60.367755) (xy 88.14215 60.3726) (xy 87.998543 60.3726) (xy 87.910084 60.383223) (xy 87.76931 60.438737) - (xy 87.769306 60.43874) (xy 87.648731 60.530175) (xy 87.648725 60.530181) (xy 87.55729 60.650756) - (xy 87.557287 60.65076) (xy 87.501773 60.791534) (xy 87.49115 60.879993) (xy 87.49115 62.766209) - (xy 87.496901 62.814097) (xy 87.485066 62.874127) (xy 87.440207 62.915736) (xy 87.398607 62.9249) - (xy 85.383936 62.9249) (xy 85.325745 62.905993) (xy 85.313932 62.895904) (xy 84.663675 62.245647) - (xy 84.635898 62.19113) (xy 84.645469 62.130698) (xy 84.688734 62.087433) (xy 84.699079 62.082886) - (xy 84.768367 62.057044) (xy 84.808979 62.041897) (xy 84.808979 62.041896) (xy 84.808981 62.041896) - (xy 84.924196 61.955646) (xy 84.99919 61.855466) (xy 85.049197 61.820214) (xy 85.110376 61.821088) - (xy 85.159357 61.857755) (xy 85.172957 61.885336) (xy 85.173628 61.88749) (xy 85.173632 61.8875) + (xy 88.114901 51.366007) (xy 88.150865 51.415507) (xy 88.150865 51.476693) (xy 88.144919 51.491046) + (xy 88.116004 51.547793) (xy 88.10115 51.641576) (xy 88.10115 57.004623) (xy 88.101151 57.004625) + (xy 88.116002 57.098401) (xy 88.116004 57.098406) (xy 88.166845 57.198187) (xy 88.1736 57.211443) + (xy 88.263307 57.30115) (xy 88.263309 57.301151) (xy 88.263311 57.301152) (xy 88.337095 57.338748) + (xy 88.38036 57.382012) (xy 88.39115 57.426957) (xy 88.39115 60.4236) (xy 88.372243 60.481791) (xy 88.322743 60.517755) + (xy 88.29215 60.5226) (xy 88.010129 60.5226) (xy 88.010126 60.522601) (xy 87.91635 60.537452) (xy 87.916345 60.537454) + (xy 87.803309 60.595049) (xy 87.713599 60.684759) (xy 87.656004 60.797795) (xy 87.64115 60.891578) + (xy 87.64115 62.754621) (xy 87.641151 62.754623) (xy 87.656002 62.848399) (xy 87.656003 62.848404) + (xy 87.67822 62.892006) (xy 87.688865 62.912898) (xy 87.698066 62.930954) (xy 87.707638 62.991386) + (xy 87.679861 63.045903) (xy 87.625345 63.073681) (xy 87.609857 63.0749) (xy 85.321804 63.0749) + (xy 85.263613 63.055993) (xy 85.2518 63.045904) (xy 84.3235 62.117604) (xy 84.295723 62.063087) + (xy 84.305294 62.002655) (xy 84.348559 61.95939) (xy 84.393504 61.9486) (xy 84.599907 61.9486) (xy 84.59991 61.9486) + (xy 84.668043 61.938673) (xy 84.773133 61.887298) (xy 84.855848 61.804583) (xy 84.907223 61.699493) + (xy 84.91715 61.63136) (xy 84.91715 61.573101) (xy 85.116651 61.573101) (xy 85.116651 61.654682) + (xy 85.123058 61.725203) (xy 85.12306 61.725209) (xy 85.173629 61.887492) (xy 85.173632 61.8875) (xy 85.261574 62.032972) (xy 85.381777 62.153175) (xy 85.527249 62.241117) (xy 85.527257 62.24112) (xy 85.689539 62.291689) (xy 85.689545 62.291691) (xy 85.760075 62.298098) (xy 85.76665 62.298098) (xy 85.76665 61.573101) (xy 86.26665 61.573101) (xy 86.26665 62.298098) (xy 86.266651 62.298099) @@ -41334,177 +46353,25 @@ (xy 86.506042 62.24112) (xy 86.50605 62.241117) (xy 86.651522 62.153175) (xy 86.771725 62.032972) (xy 86.859667 61.8875) (xy 86.85967 61.887492) (xy 86.910239 61.72521) (xy 86.910241 61.725204) (xy 86.916649 61.654681) (xy 86.91665 61.654668) (xy 86.91665 61.573101) (xy 86.916649 61.5731) - (xy 86.266651 61.5731) (xy 86.26665 61.573101) (xy 85.76665 61.573101) (xy 85.76665 61.4221) (xy 85.785557 61.363909) - (xy 85.835057 61.327945) (xy 85.86565 61.3231) (xy 86.016649 61.3231) (xy 86.01665 61.323099) (xy 86.01665 61.1721) - (xy 86.035557 61.113909) (xy 86.085057 61.077945) (xy 86.11565 61.0731) (xy 86.916648 61.0731) (xy 86.916649 61.073099) + (xy 86.266651 61.5731) (xy 86.26665 61.573101) (xy 85.76665 61.573101) (xy 85.766649 61.5731) (xy 85.116652 61.5731) + (xy 85.116651 61.573101) (xy 84.91715 61.573101) (xy 84.91715 61.167866) (xy 84.936057 61.109675) + (xy 84.946139 61.09787) (xy 84.973778 61.070231) (xy 85.02829 61.042455) (xy 85.088722 61.052026) + (xy 85.113783 61.070232) (xy 85.116651 61.0731) (xy 85.766649 61.0731) (xy 85.76665 61.073099) (xy 85.76665 60.348101) + (xy 86.26665 60.348101) (xy 86.26665 61.073099) (xy 86.266651 61.0731) (xy 86.916648 61.0731) (xy 86.916649 61.073099) (xy 86.916649 60.991533) (xy 86.916648 60.991517) (xy 86.910241 60.920996) (xy 86.910239 60.92099) (xy 86.85967 60.758707) (xy 86.859667 60.758699) (xy 86.771725 60.613227) (xy 86.651522 60.493024) (xy 86.50605 60.405082) (xy 86.506042 60.405079) (xy 86.34376 60.35451) (xy 86.343754 60.354508) - (xy 86.273231 60.3481) (xy 86.147048 60.3481) (xy 86.088857 60.329193) (xy 86.052893 60.279693) - (xy 86.052893 60.218507) (xy 86.077041 60.179099) (xy 86.83366 59.422481) (xy 86.833663 59.42248) - (xy 86.90823 59.347913) (xy 86.952998 59.270373) (xy 86.960957 59.256588) (xy 86.988251 59.154727) - (xy 86.988251 59.049273) (xy 86.988251 59.043211) (xy 86.98825 59.043193) (xy 86.98825 53.426472) - (xy 86.985397 53.415826) (xy 86.985396 53.415823) (xy 86.977964 53.388087) (xy 86.960957 53.324612) - (xy 86.957668 53.318915) (xy 86.908233 53.233291) (xy 86.908229 53.233286) (xy 86.484245 52.809301) - (xy 86.456468 52.754785) (xy 86.466039 52.694353) (xy 86.475362 52.679483) (xy 86.486011 52.665442) - (xy 86.541527 52.524664) (xy 86.55215 52.436202) (xy 86.55215 51.649998) (xy 86.547095 51.607903) - (xy 86.558929 51.547874) (xy 86.603788 51.506265) (xy 86.645389 51.4971) (xy 87.855509 51.4971) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 95.121153 52.155095) (xy 97.824654 54.858596) (xy 97.852431 54.913113) (xy 97.85365 54.9286) - (xy 97.85365 59.6736) (xy 97.834743 59.731791) (xy 97.785243 59.767755) (xy 97.75465 59.7726) (xy 97.612375 59.7726) - (xy 97.581955 59.775453) (xy 97.581946 59.775455) (xy 97.453766 59.820307) (xy 97.344505 59.900945) - (xy 97.344495 59.900955) (xy 97.263857 60.010216) (xy 97.219005 60.138396) (xy 97.219003 60.138405) - (xy 97.21615 60.168825) (xy 97.21615 60.577374) (xy 97.219003 60.607794) (xy 97.219005 60.607803) - (xy 97.263857 60.735983) (xy 97.344495 60.845244) (xy 97.344497 60.845246) (xy 97.3445 60.84525) - (xy 97.344503 60.845252) (xy 97.344505 60.845254) (xy 97.453766 60.925892) (xy 97.453767 60.925892) - (xy 97.453768 60.925893) (xy 97.581951 60.970746) (xy 97.612375 60.973599) (xy 97.612377 60.9736) - (xy 97.612384 60.9736) (xy 98.895923 60.9736) (xy 98.895923 60.973599) (xy 98.926349 60.970746) - (xy 98.970271 60.955376) (xy 99.031437 60.954003) (xy 99.081733 60.988846) (xy 99.101942 61.046598) - (xy 99.096413 61.081514) (xy 99.094005 61.088396) (xy 99.094003 61.088405) (xy 99.09115 61.118825) - (xy 99.09115 61.527374) (xy 99.094003 61.557794) (xy 99.094005 61.557804) (xy 99.096412 61.564683) - (xy 99.097784 61.625853) (xy 99.062938 61.676146) (xy 99.005186 61.696353) (xy 98.970269 61.690822) - (xy 98.926353 61.675455) (xy 98.926344 61.675453) (xy 98.895924 61.6726) (xy 98.895916 61.6726) - (xy 97.612384 61.6726) (xy 97.612375 61.6726) (xy 97.581955 61.675453) (xy 97.581946 61.675455) - (xy 97.453766 61.720307) (xy 97.344505 61.800945) (xy 97.344495 61.800955) (xy 97.263857 61.910216) - (xy 97.219005 62.038396) (xy 97.219003 62.038405) (xy 97.21615 62.068825) (xy 97.21615 62.477374) - (xy 97.219003 62.507794) (xy 97.219005 62.507803) (xy 97.263857 62.635983) (xy 97.344495 62.745244) - (xy 97.344497 62.745246) (xy 97.3445 62.74525) (xy 97.344503 62.745252) (xy 97.345847 62.746244) - (xy 97.34673 62.747479) (xy 97.349747 62.750496) (xy 97.349246 62.750996) (xy 97.38144 62.796011) - (xy 97.380984 62.857195) (xy 97.344651 62.906425) (xy 97.28706 62.9249) (xy 95.185769 62.9249) (xy 95.127578 62.905993) - (xy 95.091614 62.856493) (xy 95.087282 62.815837) (xy 95.09165 62.773086) (xy 95.09165 62.073101) - (xy 95.091649 62.0731) (xy 93.44065 62.0731) (xy 93.382459 62.054193) (xy 93.346495 62.004693) (xy 93.34165 61.9741) - (xy 93.34165 61.823101) (xy 93.341649 61.8231) (xy 93.19065 61.8231) (xy 93.132459 61.804193) (xy 93.096495 61.754693) - (xy 93.09165 61.7241) (xy 93.09165 60.173101) (xy 93.59165 60.173101) (xy 93.59165 61.573099) (xy 93.591651 61.5731) - (xy 95.091648 61.5731) (xy 95.091649 61.573099) (xy 95.091649 60.873113) (xy 95.081157 60.770412) - (xy 95.081154 60.7704) (xy 95.026006 60.603975) (xy 94.933969 60.454759) (xy 94.80999 60.33078) - (xy 94.660774 60.238743) (xy 94.494343 60.183593) (xy 94.391637 60.1731) (xy 93.591651 60.1731) - (xy 93.59165 60.173101) (xy 93.09165 60.173101) (xy 93.091649 60.1731) (xy 92.291663 60.1731) (xy 92.188962 60.183592) - (xy 92.18895 60.183595) (xy 92.022525 60.238743) (xy 91.873309 60.33078) (xy 91.74933 60.454759) - (xy 91.657293 60.603975) (xy 91.602143 60.770406) (xy 91.59165 60.873112) (xy 91.59165 61.239692) - (xy 91.572743 61.297883) (xy 91.523243 61.333847) (xy 91.462057 61.333847) (xy 91.454346 61.330568) - (xy 91.454223 61.330867) (xy 91.304047 61.268663) (xy 91.149394 61.2379) (xy 91.149392 61.2379) - (xy 90.69115 61.2379) (xy 90.632959 61.218993) (xy 90.596995 61.169493) (xy 90.59215 61.1389) (xy 90.59215 60.879999) - (xy 90.592149 60.879993) (xy 90.590582 60.866943) (xy 90.581527 60.791536) (xy 90.53785 60.68078) - (xy 90.526012 60.65076) (xy 90.526011 60.650759) (xy 90.526011 60.650758) (xy 90.434572 60.530178) - (xy 90.313992 60.438739) (xy 90.313991 60.438738) (xy 90.313989 60.438737) (xy 90.173215 60.383223) - (xy 90.084756 60.3726) (xy 90.084752 60.3726) (xy 89.94115 60.3726) (xy 89.882959 60.353693) (xy 89.846995 60.304193) - (xy 89.84215 60.2736) (xy 89.84215 57.622599) (xy 89.861057 57.564408) (xy 89.910557 57.528444) - (xy 89.94115 57.523599) (xy 94.444751 57.523599) (xy 94.444754 57.523599) (xy 94.533217 57.512977) - (xy 94.622614 57.477723) (xy 94.673992 57.457462) (xy 94.673992 57.457461) (xy 94.673994 57.457461) - (xy 94.794573 57.366023) (xy 94.886011 57.245444) (xy 94.88694 57.24309) (xy 94.902672 57.203195) - (xy 94.941527 57.104667) (xy 94.95215 57.016205) (xy 94.952149 52.225098) (xy 94.971056 52.166908) - (xy 95.020556 52.130944) (xy 95.081742 52.130944) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 176.759998 48.076239) (xy 176.768435 48.083763) (xy 177.962154 49.277482) (xy 177.989931 49.331999) - (xy 177.99115 49.347486) (xy 177.99115 51.741206) (xy 178.001773 51.829665) (xy 178.057287 51.970439) - (xy 178.057288 51.970441) (xy 178.057289 51.970442) (xy 178.148728 52.091022) (xy 178.269308 52.182461) - (xy 178.269309 52.182461) (xy 178.26931 52.182462) (xy 178.30896 52.198098) (xy 178.410086 52.237977) - (xy 178.498548 52.2486) (xy 178.49855 52.2486) (xy 179.08475 52.2486) (xy 179.084752 52.2486) (xy 179.173214 52.237977) - (xy 179.313992 52.182461) (xy 179.434572 52.091022) (xy 179.526011 51.970442) (xy 179.543086 51.92714) - (xy 179.582021 51.879945) (xy 179.641263 51.864647) (xy 179.698183 51.887092) (xy 179.729158 51.932319) - (xy 179.757293 52.017225) (xy 179.84933 52.16644) (xy 179.973309 52.290419) (xy 180.122525 52.382456) - (xy 180.240483 52.421544) (xy 180.289773 52.457795) (xy 180.308341 52.516095) (xy 180.289096 52.574175) - (xy 180.279347 52.585523) (xy 178.264768 54.600104) (xy 178.210251 54.627881) (xy 178.194764 54.6291) - (xy 176.915279 54.6291) (xy 176.857088 54.610193) (xy 176.821124 54.560693) (xy 176.817204 54.523977) - (xy 176.816522 54.523943) (xy 176.81665 54.521425) (xy 176.81665 54.498101) (xy 176.816649 54.4981) - (xy 174.866652 54.4981) (xy 174.866651 54.498101) (xy 174.866651 54.521423) (xy 174.866779 54.52394) - (xy 174.865648 54.523997) (xy 174.85363 54.579823) (xy 174.808054 54.620645) (xy 174.768023 54.6291) - (xy 173.06615 54.6291) (xy 173.007959 54.610193) (xy 172.971995 54.560693) (xy 172.96715 54.5301) - (xy 172.96715 54.428827) (xy 172.967149 54.428825) (xy 172.965726 54.413649) (xy 172.964296 54.398401) - (xy 172.919443 54.270218) (xy 172.850803 54.177214) (xy 172.838804 54.160955) (xy 172.838802 54.160953) - (xy 172.8388 54.16095) (xy 172.838796 54.160947) (xy 172.838794 54.160945) (xy 172.726075 54.077755) - (xy 172.690482 54.027988) (xy 172.69094 53.966804) (xy 172.726075 53.918445) (xy 172.8388 53.83525) - (xy 172.842528 53.830199) (xy 172.858626 53.808386) (xy 172.90839 53.772794) (xy 172.969574 53.77325) - (xy 173.008282 53.797168) (xy 173.037934 53.82682) (xy 173.174866 53.905877) (xy 173.327593 53.9468) - (xy 173.327595 53.9468) (xy 173.485705 53.9468) (xy 173.485707 53.9468) (xy 173.638434 53.905877) - (xy 173.775366 53.82682) (xy 173.88717 53.715016) (xy 173.966227 53.578084) (xy 174.00715 53.425357) - (xy 174.00715 53.267243) (xy 173.966227 53.114516) (xy 173.88717 52.977584) (xy 173.775366 52.86578) - (xy 173.638434 52.786723) (xy 173.485707 52.7458) (xy 173.327593 52.7458) (xy 173.174866 52.786723) - (xy 173.065795 52.849695) (xy 173.037931 52.865782) (xy 172.994016 52.909697) (xy 172.939499 52.937474) - (xy 172.879067 52.927902) (xy 172.862076 52.916925) (xy 172.852016 52.908857) (xy 172.8388 52.89095) - (xy 172.729532 52.810307) (xy 172.728818 52.810057) (xy 172.722926 52.805332) (xy 172.707183 52.78134) - (xy 172.690482 52.757988) (xy 172.690497 52.755911) (xy 172.689359 52.754176) (xy 172.690725 52.725503) - (xy 172.69094 52.696804) (xy 172.692173 52.695106) (xy 172.692271 52.69306) (xy 172.70704 52.674643) - (xy 172.726075 52.648445) (xy 172.811331 52.585523) (xy 172.8388 52.56525) (xy 172.919443 52.455982) - (xy 172.964296 52.327799) (xy 172.967149 52.297373) (xy 172.96715 52.297373) (xy 172.96715 51.888827) - (xy 172.967149 51.888825) (xy 172.966986 51.887092) (xy 172.964296 51.858401) (xy 172.964295 51.858399) - (xy 172.963787 51.85607) (xy 172.963936 51.854564) (xy 172.963734 51.852404) (xy 172.964155 51.852364) - (xy 172.96984 51.795185) (xy 172.990499 51.764941) (xy 174.22406 50.531381) (xy 174.224063 50.53138) - (xy 174.29863 50.456813) (xy 174.333221 50.3969) (xy 174.351357 50.365488) (xy 174.37865 50.263627) - (xy 174.37865 50.158173) (xy 174.37865 49.8685) (xy 174.397557 49.810309) (xy 174.407646 49.798497) - (xy 174.645012 49.561131) (xy 174.897146 49.308995) (xy 174.951663 49.281218) (xy 175.012095 49.290789) - (xy 175.05536 49.334054) (xy 175.06615 49.378999) (xy 175.06615 49.695966) (xy 175.066151 49.69597) - (xy 175.072558 49.75558) (xy 175.072559 49.755585) (xy 175.122852 49.890429) (xy 175.193851 49.985271) - (xy 175.209104 50.005646) (xy 175.209107 50.005648) (xy 175.209108 50.005649) (xy 175.324317 50.091895) - (xy 175.324318 50.091895) (xy 175.324319 50.091896) (xy 175.376748 50.11145) (xy 175.424661 50.1495) - (xy 175.44115 50.204208) (xy 175.44115 51.900185) (xy 175.422243 51.958376) (xy 175.378469 51.992282) - (xy 175.331678 52.010734) (xy 175.331675 52.010735) (xy 175.331675 52.010736) (xy 175.225808 52.091018) - (xy 175.216572 52.098022) (xy 175.129284 52.213127) (xy 175.076291 52.347508) (xy 175.06615 52.431951) - (xy 175.06615 52.964248) (xy 175.076291 53.048691) (xy 175.129284 53.183072) (xy 175.129285 53.183074) - (xy 175.129286 53.183075) (xy 175.204673 53.282487) (xy 175.224768 53.340278) (xy 175.207057 53.398843) - (xy 175.177764 53.426565) (xy 175.138919 53.450526) (xy 175.019075 53.57037) (xy 174.930104 53.714612) - (xy 174.876793 53.875496) (xy 174.86665 53.974776) (xy 174.86665 53.998099) (xy 174.866651 53.9981) - (xy 176.816648 53.9981) (xy 176.816649 53.998099) (xy 176.816649 53.974777) (xy 176.806507 53.875502) - (xy 176.806504 53.87549) (xy 176.753195 53.714612) (xy 176.664224 53.57037) (xy 176.54438 53.450526) - (xy 176.505537 53.426567) (xy 176.465936 53.379926) (xy 176.461313 53.318915) (xy 176.478627 53.282487) - (xy 176.515937 53.233287) (xy 176.554014 53.183075) (xy 176.607009 53.04869) (xy 176.61715 52.964244) - (xy 176.61715 52.431956) (xy 176.607009 52.34751) (xy 176.568003 52.248599) (xy 176.554015 52.213127) - (xy 176.554014 52.213126) (xy 176.554014 52.213125) (xy 176.466728 52.098022) (xy 176.351625 52.010736) - (xy 176.351622 52.010734) (xy 176.351621 52.010734) (xy 176.304831 51.992282) (xy 176.257634 51.953345) - (xy 176.24215 51.900185) (xy 176.24215 50.204208) (xy 176.261057 50.146017) (xy 176.306551 50.11145) - (xy 176.358981 50.091896) (xy 176.474196 50.005646) (xy 176.560446 49.890431) (xy 176.610741 49.755583) - (xy 176.61715 49.695973) (xy 176.617149 49.200228) (xy 176.610741 49.140617) (xy 176.605216 49.125803) - (xy 176.560447 49.00577) (xy 176.474199 48.890558) (xy 176.474198 48.890557) (xy 176.474196 48.890554) - (xy 176.474191 48.89055) (xy 176.358979 48.804302) (xy 176.224138 48.75401) (xy 176.224133 48.754009) - (xy 176.224131 48.754008) (xy 176.224127 48.754008) (xy 176.192899 48.75065) (xy 176.164523 48.7476) - (xy 176.16452 48.7476) (xy 175.697549 48.7476) (xy 175.675498 48.740435) (xy 175.652603 48.736809) - (xy 175.646955 48.731161) (xy 175.639358 48.728693) (xy 175.625729 48.709934) (xy 175.609339 48.693544) - (xy 175.608089 48.685656) (xy 175.603394 48.679193) (xy 175.603394 48.656006) (xy 175.599768 48.633112) - (xy 175.603394 48.625995) (xy 175.603394 48.618007) (xy 175.627546 48.578596) (xy 175.678548 48.527595) - (xy 175.733065 48.499818) (xy 175.748551 48.498599) (xy 176.164517 48.498599) (xy 176.164522 48.498599) - (xy 176.224133 48.492191) (xy 176.31793 48.457207) (xy 176.358979 48.441897) (xy 176.358979 48.441896) - (xy 176.358981 48.441896) (xy 176.474196 48.355646) (xy 176.560446 48.240431) (xy 176.563116 48.233274) - (xy 176.605673 48.119171) (xy 176.643723 48.071256) (xy 176.70267 48.054858) - ) - ) - (filled_polygon - (layer "F.Cu") - (pts - (xy 178.953487 45.701114) (xy 178.966272 45.7119) (xy 182.062154 48.807782) (xy 182.089931 48.862299) - (xy 182.09115 48.877786) (xy 182.09115 49.341614) (xy 182.072243 49.399805) (xy 182.062154 49.411617) - (xy 182.005459 49.468312) (xy 181.917859 49.599413) (xy 181.917853 49.599425) (xy 181.857513 49.745101) - (xy 181.857513 49.745103) (xy 181.82675 49.899755) (xy 181.82675 50.421278) (xy 181.807843 50.479469) - (xy 181.758343 50.515433) (xy 181.697157 50.515433) (xy 181.647657 50.479469) (xy 181.633775 50.452419) - (xy 181.626006 50.428974) (xy 181.533969 50.279759) (xy 181.40999 50.15578) (xy 181.260774 50.063743) - (xy 181.094343 50.008593) (xy 180.991637 49.9981) (xy 180.941651 49.9981) (xy 180.94165 49.998101) - (xy 180.94165 51.1241) (xy 180.922743 51.182291) (xy 180.873243 51.218255) (xy 180.84265 51.2231) - (xy 180.54065 51.2231) (xy 180.482459 51.204193) (xy 180.446495 51.154693) (xy 180.44165 51.1241) - (xy 180.44165 49.9981) (xy 180.432811 49.989261) (xy 180.405034 49.934744) (xy 180.404577 49.918906) - (xy 180.40385 49.918906) (xy 180.40385 49.756359) (xy 180.403849 49.756355) (xy 180.373087 49.601703) - (xy 180.319454 49.47222) (xy 180.312746 49.456025) (xy 180.31274 49.456014) (xy 180.270099 49.392199) - (xy 180.225139 49.324911) (xy 180.113639 49.213411) (xy 180.03097 49.158173) (xy 179.982535 49.125809) - (xy 179.982524 49.125803) (xy 179.836847 49.065463) (xy 179.682195 49.0347) (xy 179.681449 49.034627) - (xy 179.681134 49.034489) (xy 179.677422 49.033751) (xy 179.677584 49.032936) (xy 179.675713 49.032118) - (xy 179.669482 49.032703) (xy 179.648127 49.020052) (xy 179.625391 49.010108) (xy 179.622226 49.004708) - (xy 179.61684 49.001518) (xy 179.610481 48.984672) (xy 179.594451 48.957323) (xy 179.592582 48.945346) - (xy 179.59215 48.940739) (xy 179.59215 48.896058) (xy 179.585219 48.861216) (xy 179.561387 48.741403) - (xy 179.560926 48.740289) (xy 179.556123 48.728693) (xy 179.501046 48.595725) (xy 179.50104 48.595714) - (xy 179.465667 48.542776) (xy 179.413439 48.464611) (xy 179.301939 48.353111) (xy 177.889485 46.940657) - (xy 177.861708 46.88614) (xy 177.871279 46.825708) (xy 177.909991 46.784916) (xy 177.91396 46.782624) - (xy 177.913961 46.782622) (xy 177.913966 46.78262) (xy 178.02577 46.670816) (xy 178.104827 46.533884) - (xy 178.14575 46.381157) (xy 178.14575 46.381149) (xy 178.146147 46.378135) (xy 178.147087 46.376161) - (xy 178.147429 46.374889) (xy 178.147664 46.374952) (xy 178.172483 46.322908) (xy 178.226251 46.293708) - (xy 178.235345 46.292455) (xy 178.243752 46.291691) (xy 178.243759 46.291689) (xy 178.406042 46.24112) - (xy 178.40605 46.241117) (xy 178.551522 46.153175) (xy 178.671725 46.032972) (xy 178.759668 45.887499) - (xy 178.75967 45.887492) (xy 178.801751 45.752451) (xy 178.837114 45.70252) (xy 178.895072 45.682911) + (xy 86.273231 60.3481) (xy 86.266651 60.3481) (xy 86.26665 60.348101) (xy 85.76665 60.348101) (xy 85.76665 60.318367) + (xy 85.769118 60.310769) (xy 85.767869 60.30288) (xy 85.778393 60.282224) (xy 85.785557 60.260176) + (xy 85.795642 60.248366) (xy 86.729645 59.314364) (xy 86.729647 59.314364) (xy 86.800114 59.243897) + (xy 86.811284 59.21693) (xy 86.838251 59.151828) (xy 86.838251 59.052172) (xy 86.838251 59.044198) + (xy 86.83825 59.044184) (xy 86.83825 53.429371) (xy 86.800114 53.337303) (xy 86.729647 53.266835) + (xy 86.729647 53.266836) (xy 86.28198 52.819169) (xy 86.254203 52.764652) (xy 86.263774 52.70422) + (xy 86.281977 52.679164) (xy 86.3297 52.631442) (xy 86.387296 52.518404) (xy 86.40215 52.424619) + (xy 86.402149 51.661582) (xy 86.402149 51.661581) (xy 86.402149 51.661578) (xy 86.402148 51.661576) + (xy 86.387297 51.5678) (xy 86.387296 51.567797) (xy 86.387296 51.567796) (xy 86.348188 51.491044) + (xy 86.338618 51.430613) (xy 86.366395 51.376097) (xy 86.420912 51.348319) (xy 86.436399 51.3471) + (xy 88.05671 51.3471) ) ) (filled_polygon @@ -41557,33 +46424,104 @@ (xy 198.979358 137.310582) (xy 198.853942 137.38299) (xy 198.75154 137.485392) (xy 198.679132 137.610808) (xy 198.667862 137.652866) (xy 197.968989 136.953993) (xy 197.908738 137.036923) (xy 197.801544 137.247303) (xy 197.801542 137.247306) (xy 197.728585 137.471843) (xy 197.728584 137.471847) (xy 197.69165 137.705043) - (xy 80.859853 137.705043) (xy 80.859849 137.701257) (xy 80.858736 136.600439) (xy 80.857322 135.20181) + (xy 80.859853 137.705043) (xy 80.859849 137.701257) (xy 80.858681 136.545831) (xy 80.857322 135.20181) (xy 83.34115 135.20181) (xy 83.34115 135.444389) (xy 83.372811 135.684881) (xy 83.372811 135.684886) - (xy 83.435594 135.919192) (xy 83.435598 135.919205) (xy 83.528422 136.143304) (xy 83.528424 136.143308) - (xy 83.528426 136.143312) (xy 83.632227 136.3231) (xy 83.649716 136.353392) (xy 83.797379 136.545831) - (xy 83.797381 136.545833) (xy 83.797385 136.545838) (xy 83.968912 136.717365) (xy 83.968916 136.717368) - (xy 83.968918 136.71737) (xy 84.161357 136.865033) (xy 84.161361 136.865036) (xy 84.371438 136.986324) - (xy 84.59555 137.079154) (xy 84.829861 137.141938) (xy 85.070362 137.1736) (xy 85.070363 137.1736) - (xy 85.312937 137.1736) (xy 85.312938 137.1736) (xy 85.553439 137.141938) (xy 85.78775 137.079154) - (xy 86.011862 136.986324) (xy 86.221939 136.865036) (xy 86.414388 136.717365) (xy 86.585915 136.545838) - (xy 86.733586 136.353389) (xy 86.854874 136.143312) (xy 86.947704 135.9192) (xy 87.010488 135.684889) - (xy 87.04215 135.444388) (xy 87.04215 135.201812) (xy 87.010488 134.961311) (xy 86.947704 134.727) - (xy 86.854874 134.502888) (xy 86.733586 134.292811) (xy 86.585915 134.100362) (xy 86.414388 133.928835) - (xy 86.414383 133.928831) (xy 86.414381 133.928829) (xy 86.221942 133.781166) (xy 86.18369 133.759081) - (xy 86.011862 133.659876) (xy 86.011858 133.659874) (xy 86.011854 133.659872) (xy 85.787755 133.567048) - (xy 85.787754 133.567047) (xy 85.78775 133.567046) (xy 85.553439 133.504262) (xy 85.553436 133.504261) - (xy 85.553434 133.504261) (xy 85.312939 133.4726) (xy 85.312938 133.4726) (xy 85.070362 133.4726) - (xy 85.07036 133.4726) (xy 84.829868 133.504261) (xy 84.829863 133.504261) (xy 84.595557 133.567044) - (xy 84.595544 133.567048) (xy 84.371445 133.659872) (xy 84.161357 133.781166) (xy 83.968918 133.928829) - (xy 83.797379 134.100368) (xy 83.649716 134.292807) (xy 83.528422 134.502895) (xy 83.435598 134.726994) - (xy 83.435594 134.727007) (xy 83.372811 134.961313) (xy 83.372811 134.961318) (xy 83.34115 135.20181) - (xy 80.857322 135.20181) (xy 80.854823 132.729993) (xy 171.09115 132.729993) (xy 171.09115 134.916206) - (xy 171.101773 135.004665) (xy 171.157287 135.145439) (xy 171.157288 135.145441) (xy 171.157289 135.145442) - (xy 171.248728 135.266022) (xy 171.369308 135.357461) (xy 171.369309 135.357461) (xy 171.36931 135.357462) - (xy 171.437088 135.38419) (xy 171.510086 135.412977) (xy 171.598548 135.4236) (xy 171.59855 135.4236) - (xy 173.78475 135.4236) (xy 173.784752 135.4236) (xy 173.873214 135.412977) (xy 174.013992 135.357461) - (xy 174.134572 135.266022) (xy 174.226011 135.145442) (xy 174.281527 135.004664) (xy 174.29215 134.916202) - (xy 174.29215 133.705121) (xy 175.89165 133.705121) (xy 175.89165 133.941078) (xy 175.922448 134.175008) + (xy 83.372812 135.684889) (xy 83.435517 135.918907) (xy 83.435594 135.919192) (xy 83.435598 135.919205) + (xy 83.528422 136.143304) (xy 83.528424 136.143308) (xy 83.528426 136.143312) (xy 83.643191 136.34209) + (xy 83.649716 136.353392) (xy 83.797379 136.545831) (xy 83.797381 136.545833) (xy 83.797385 136.545838) + (xy 83.968912 136.717365) (xy 83.968916 136.717368) (xy 83.968918 136.71737) (xy 84.161357 136.865033) + (xy 84.161361 136.865036) (xy 84.371438 136.986324) (xy 84.59555 137.079154) (xy 84.829861 137.141938) + (xy 85.070362 137.1736) (xy 85.070363 137.1736) (xy 85.312937 137.1736) (xy 85.312938 137.1736) + (xy 85.553439 137.141938) (xy 85.78775 137.079154) (xy 86.011862 136.986324) (xy 86.221939 136.865036) + (xy 86.414388 136.717365) (xy 86.585915 136.545838) (xy 86.733586 136.353389) (xy 86.854874 136.143312) + (xy 86.947704 135.9192) (xy 87.010488 135.684889) (xy 87.029472 135.540691) (xy 141.4495 135.540691) + (xy 141.4495 135.659309) (xy 141.476574 135.760351) (xy 141.480202 135.77389) (xy 141.539507 135.876608) + (xy 141.539509 135.87661) (xy 141.539511 135.876613) (xy 141.623387 135.960489) (xy 141.623389 135.96049) + (xy 141.623391 135.960492) (xy 141.72611 136.019797) (xy 141.726111 136.019797) (xy 141.726114 136.019799) + (xy 141.840691 136.0505) (xy 141.840693 136.0505) (xy 141.959307 136.0505) (xy 141.959309 136.0505) + (xy 142.073886 136.019799) (xy 142.073888 136.019797) (xy 142.07389 136.019797) (xy 142.176608 135.960492) + (xy 142.176608 135.960491) (xy 142.176613 135.960489) (xy 142.257607 135.879494) (xy 142.312122 135.851719) + (xy 142.327609 135.8505) (xy 143.4255 135.8505) (xy 143.483691 135.869407) (xy 143.519655 135.918907) + (xy 143.5245 135.9495) (xy 143.5245 136.114827) (xy 143.533232 136.15872) (xy 143.533233 136.158722) + (xy 143.566496 136.208504) (xy 143.616278 136.241767) (xy 143.627327 136.243964) (xy 143.660172 136.250499) + (xy 143.660178 136.250499) (xy 143.66018 136.2505) (xy 143.660181 136.2505) (xy 144.939819 136.2505) + (xy 144.93982 136.2505) (xy 144.939821 136.250499) (xy 144.939827 136.250499) (xy 144.961623 136.246162) + (xy 144.983722 136.241767) (xy 145.033504 136.208504) (xy 145.066767 136.158722) (xy 145.068935 136.147824) + (xy 150.924999 136.147824) (xy 150.931401 136.20737) (xy 150.931403 136.207381) (xy 150.981646 136.342088) + (xy 150.981647 136.34209) (xy 151.067807 136.457184) (xy 151.067815 136.457192) (xy 151.182909 136.543352) + (xy 151.182911 136.543353) (xy 151.317618 136.593596) (xy 151.317629 136.593598) (xy 151.377176 136.6) + (xy 151.799999 136.6) (xy 151.8 136.599999) (xy 151.8 135.850001) (xy 152.3 135.850001) (xy 152.3 136.599999) + (xy 152.300001 136.6) (xy 152.722824 136.6) (xy 152.78237 136.593598) (xy 152.782381 136.593596) + (xy 152.911564 136.545414) (xy 152.911567 136.545413) (xy 152.91709 136.543352) (xy 153.032184 136.457192) + (xy 153.032192 136.457184) (xy 153.118352 136.34209) (xy 153.118353 136.342088) (xy 153.168596 136.207381) + (xy 153.168598 136.20737) (xy 153.175 136.147824) (xy 153.175 135.850001) (xy 153.174999 135.85) + (xy 152.300001 135.85) (xy 152.3 135.850001) (xy 151.8 135.850001) (xy 151.799999 135.85) (xy 150.925001 135.85) + (xy 150.925 135.850001) (xy 150.925 136.147824) (xy 150.924999 136.147824) (xy 145.068935 136.147824) + (xy 145.0755 136.11482) (xy 145.0755 135.08518) (xy 145.072249 135.068835) (xy 145.072249 135.068833) + (xy 145.068935 135.052175) (xy 150.925 135.052175) (xy 150.925 135.349999) (xy 150.925001 135.35) + (xy 151.799999 135.35) (xy 151.8 135.349999) (xy 151.8 134.600001) (xy 152.3 134.600001) (xy 152.3 135.349999) + (xy 152.300001 135.35) (xy 153.174999 135.35) (xy 153.175 135.349999) (xy 153.175 135.052175) (xy 153.168598 134.992629) + (xy 153.168596 134.992618) (xy 153.118353 134.857911) (xy 153.118352 134.857909) (xy 153.032192 134.742815) + (xy 153.032184 134.742807) (xy 152.91709 134.656647) (xy 152.917088 134.656646) (xy 152.782381 134.606403) + (xy 152.78237 134.606401) (xy 152.722824 134.6) (xy 152.300001 134.6) (xy 152.3 134.600001) (xy 151.8 134.600001) + (xy 151.799999 134.6) (xy 151.377176 134.6) (xy 151.317629 134.606401) (xy 151.317618 134.606403) + (xy 151.182911 134.656646) (xy 151.182909 134.656647) (xy 151.067815 134.742807) (xy 151.067807 134.742815) + (xy 150.981647 134.857909) (xy 150.981646 134.857911) (xy 150.931403 134.992618) (xy 150.931401 134.992629) + (xy 150.925 135.052175) (xy 145.068935 135.052175) (xy 145.066767 135.041279) (xy 145.066765 135.041275) + (xy 145.057143 135.026875) (xy 145.033504 134.991496) (xy 145.03284 134.991052) (xy 144.983724 134.958234) + (xy 144.98372 134.958232) (xy 144.939827 134.9495) (xy 144.93982 134.9495) (xy 143.66018 134.9495) + (xy 143.660172 134.9495) (xy 143.616279 134.958232) (xy 143.616275 134.958234) (xy 143.566498 134.991494) + (xy 143.566494 134.991498) (xy 143.533234 135.041275) (xy 143.533232 135.041279) (xy 143.5245 135.085172) + (xy 143.5245 135.2505) (xy 143.505593 135.308691) (xy 143.456093 135.344655) (xy 143.4255 135.3495) + (xy 142.327609 135.3495) (xy 142.269418 135.330593) (xy 142.257611 135.320509) (xy 142.176613 135.239511) + (xy 142.17661 135.239509) (xy 142.176608 135.239507) (xy 142.073889 135.180202) (xy 142.07389 135.180202) + (xy 142.060351 135.176574) (xy 141.959309 135.1495) (xy 141.840691 135.1495) (xy 141.774149 135.16733) + (xy 141.726109 135.180202) (xy 141.623391 135.239507) (xy 141.539507 135.323391) (xy 141.480202 135.426109) + (xy 141.475304 135.444388) (xy 141.4495 135.540691) (xy 87.029472 135.540691) (xy 87.04215 135.444388) + (xy 87.04215 135.201812) (xy 87.010488 134.961311) (xy 86.947704 134.727) (xy 86.854874 134.502888) + (xy 86.733586 134.292811) (xy 86.585915 134.100362) (xy 86.414388 133.928835) (xy 86.414383 133.928831) + (xy 86.414381 133.928829) (xy 86.221942 133.781166) (xy 86.19349 133.764739) (xy 86.011862 133.659876) + (xy 86.011858 133.659874) (xy 86.011854 133.659872) (xy 85.787755 133.567048) (xy 85.787754 133.567047) + (xy 85.78775 133.567046) (xy 85.553439 133.504262) (xy 85.553436 133.504261) (xy 85.553434 133.504261) + (xy 85.312939 133.4726) (xy 85.312938 133.4726) (xy 85.070362 133.4726) (xy 85.07036 133.4726) (xy 84.829868 133.504261) + (xy 84.829863 133.504261) (xy 84.595557 133.567044) (xy 84.595544 133.567048) (xy 84.371445 133.659872) + (xy 84.161357 133.781166) (xy 83.968918 133.928829) (xy 83.797379 134.100368) (xy 83.649716 134.292807) + (xy 83.528422 134.502895) (xy 83.435598 134.726994) (xy 83.435594 134.727007) (xy 83.372811 134.961313) + (xy 83.372811 134.961318) (xy 83.34115 135.20181) (xy 80.857322 135.20181) (xy 80.855391 133.29143) + (xy 158.875 133.29143) (xy 158.875 133.534999) (xy 158.875001 133.535) (xy 159.525 133.535) (xy 159.525 134.035) + (xy 158.875001 134.035) (xy 158.875 134.035001) (xy 158.875 134.278569) (xy 158.911508 134.462104) + (xy 158.911508 134.462106) (xy 158.983118 134.634989) (xy 158.983124 134.635001) (xy 159.087087 134.790589) + (xy 159.08709 134.790593) (xy 159.219406 134.922909) (xy 159.21941 134.922912) (xy 159.374998 135.026875) + (xy 159.37501 135.026881) (xy 159.547888 135.098489) (xy 159.547899 135.098492) (xy 159.575 135.103882) + (xy 159.575 134.351988) (xy 159.58494 134.369205) (xy 159.640795 134.42506) (xy 159.709204 134.464556) + (xy 159.785504 134.485) (xy 159.864496 134.485) (xy 159.940796 134.464556) (xy 160.009205 134.42506) + (xy 160.06506 134.369205) (xy 160.075 134.351988) (xy 160.075 135.103881) (xy 160.1021 135.098492) + (xy 160.102111 135.098489) (xy 160.274989 135.026881) (xy 160.275001 135.026875) (xy 160.430589 134.922912) + (xy 160.430593 134.922909) (xy 160.562909 134.790593) (xy 160.562912 134.790589) (xy 160.666875 134.635001) + (xy 160.666881 134.634989) (xy 160.738491 134.462106) (xy 160.738491 134.462104) (xy 160.774999 134.278569) + (xy 160.775 134.278565) (xy 160.775 134.035001) (xy 160.774999 134.035) (xy 160.125 134.035) (xy 160.125 133.535) + (xy 160.774999 133.535) (xy 160.775 133.534999) (xy 160.775 133.291434) (xy 160.774999 133.29143) + (xy 167.525 133.29143) (xy 167.525 133.534999) (xy 167.525001 133.535) (xy 168.175 133.535) (xy 168.175 134.035) + (xy 167.525001 134.035) (xy 167.525 134.035001) (xy 167.525 134.278569) (xy 167.561508 134.462104) + (xy 167.561508 134.462106) (xy 167.633118 134.634989) (xy 167.633124 134.635001) (xy 167.737087 134.790589) + (xy 167.73709 134.790593) (xy 167.869406 134.922909) (xy 167.86941 134.922912) (xy 168.024998 135.026875) + (xy 168.02501 135.026881) (xy 168.197888 135.098489) (xy 168.197899 135.098492) (xy 168.225 135.103882) + (xy 168.225 134.351988) (xy 168.23494 134.369205) (xy 168.290795 134.42506) (xy 168.359204 134.464556) + (xy 168.435504 134.485) (xy 168.514496 134.485) (xy 168.590796 134.464556) (xy 168.659205 134.42506) + (xy 168.71506 134.369205) (xy 168.725 134.351988) (xy 168.725 135.103881) (xy 168.7521 135.098492) + (xy 168.752111 135.098489) (xy 168.924989 135.026881) (xy 168.925001 135.026875) (xy 169.080589 134.922912) + (xy 169.080593 134.922909) (xy 169.212909 134.790593) (xy 169.212912 134.790589) (xy 169.316875 134.635001) + (xy 169.316881 134.634989) (xy 169.388491 134.462106) (xy 169.388491 134.462104) (xy 169.424999 134.278569) + (xy 169.425 134.278565) (xy 169.425 134.035001) (xy 169.424999 134.035) (xy 168.775 134.035) (xy 168.775 133.535) + (xy 169.424999 133.535) (xy 169.425 133.534999) (xy 169.425 133.291434) (xy 169.424999 133.29143) + (xy 169.388491 133.107895) (xy 169.388491 133.107893) (xy 169.316881 132.93501) (xy 169.316875 132.934998) + (xy 169.221788 132.792693) (xy 169.212912 132.77941) (xy 169.212909 132.779406) (xy 169.175081 132.741578) + (xy 171.24115 132.741578) (xy 171.24115 134.904621) (xy 171.241151 134.904623) (xy 171.256002 134.998399) + (xy 171.256004 134.998404) (xy 171.3136 135.111442) (xy 171.403308 135.20115) (xy 171.516346 135.258746) + (xy 171.610131 135.2736) (xy 173.773168 135.273599) (xy 173.773171 135.273599) (xy 173.773172 135.273598) + (xy 173.820061 135.266172) (xy 173.866949 135.258747) (xy 173.866949 135.258746) (xy 173.866954 135.258746) + (xy 173.979992 135.20115) (xy 174.0697 135.111442) (xy 174.127296 134.998404) (xy 174.14215 134.904619) + (xy 174.142149 133.705121) (xy 175.89165 133.705121) (xy 175.89165 133.941078) (xy 175.922448 134.175008) (xy 175.922448 134.175013) (xy 175.983517 134.402924) (xy 175.983521 134.402937) (xy 176.073813 134.620924) (xy 176.073815 134.620929) (xy 176.191792 134.825269) (xy 176.25437 134.906824) (xy 177.090607 134.070586) (xy 177.115628 134.13099) (xy 177.186762 134.237451) (xy 177.277299 134.327988) (xy 177.38376 134.399122) @@ -41596,101 +46534,103 @@ (xy 178.196538 134.237451) (xy 178.267672 134.13099) (xy 178.292691 134.070587) (xy 179.128928 134.906824) (xy 179.19151 134.825265) (xy 179.309484 134.620929) (xy 179.309486 134.620924) (xy 179.399778 134.402937) (xy 179.399782 134.402924) (xy 179.460851 134.175013) (xy 179.460851 134.175008) (xy 179.491649 133.941078) - (xy 179.49165 133.941077) (xy 179.49165 133.705123) (xy 179.491649 133.70512) (xy 179.490598 133.697134) - (xy 181.09115 133.697134) (xy 181.09115 133.949065) (xy 181.130558 134.19788) (xy 181.208409 134.437479) - (xy 181.301878 134.620924) (xy 181.32278 134.661945) (xy 181.470857 134.865756) (xy 181.648994 135.043893) - (xy 181.852805 135.19197) (xy 182.077271 135.306341) (xy 182.316865 135.38419) (xy 182.316866 135.38419) - (xy 182.316869 135.384191) (xy 182.565685 135.4236) (xy 182.565688 135.4236) (xy 182.817615 135.4236) - (xy 183.06643 135.384191) (xy 183.066431 135.38419) (xy 183.066435 135.38419) (xy 183.306029 135.306341) - (xy 183.530495 135.19197) (xy 183.734306 135.043893) (xy 183.912443 134.865756) (xy 184.06052 134.661945) - (xy 184.174891 134.437479) (xy 184.25274 134.197885) (xy 184.256363 134.175013) (xy 184.29215 133.949065) - (xy 184.29215 133.697134) (xy 186.09115 133.697134) (xy 186.09115 133.949065) (xy 186.130558 134.19788) - (xy 186.208409 134.437479) (xy 186.301878 134.620924) (xy 186.32278 134.661945) (xy 186.470857 134.865756) - (xy 186.648994 135.043893) (xy 186.852805 135.19197) (xy 187.077271 135.306341) (xy 187.316865 135.38419) - (xy 187.316866 135.38419) (xy 187.316869 135.384191) (xy 187.565685 135.4236) (xy 187.565688 135.4236) - (xy 187.817615 135.4236) (xy 188.06643 135.384191) (xy 188.066431 135.38419) (xy 188.066435 135.38419) - (xy 188.306029 135.306341) (xy 188.530495 135.19197) (xy 188.734306 135.043893) (xy 188.912443 134.865756) - (xy 189.06052 134.661945) (xy 189.174891 134.437479) (xy 189.25274 134.197885) (xy 189.256363 134.175013) - (xy 189.29215 133.949065) (xy 189.29215 133.697134) (xy 191.09115 133.697134) (xy 191.09115 133.949065) - (xy 191.130558 134.19788) (xy 191.208409 134.437479) (xy 191.301878 134.620924) (xy 191.32278 134.661945) - (xy 191.470857 134.865756) (xy 191.648994 135.043893) (xy 191.852805 135.19197) (xy 192.077271 135.306341) - (xy 192.316865 135.38419) (xy 192.316866 135.38419) (xy 192.316869 135.384191) (xy 192.565685 135.4236) - (xy 192.565688 135.4236) (xy 192.817615 135.4236) (xy 193.06643 135.384191) (xy 193.066431 135.38419) - (xy 193.066435 135.38419) (xy 193.306029 135.306341) (xy 193.511183 135.20181) (xy 209.34115 135.20181) - (xy 209.34115 135.444389) (xy 209.372811 135.684881) (xy 209.372811 135.684886) (xy 209.435594 135.919192) - (xy 209.435598 135.919205) (xy 209.528422 136.143304) (xy 209.528424 136.143308) (xy 209.528426 136.143312) - (xy 209.632227 136.3231) (xy 209.649716 136.353392) (xy 209.797379 136.545831) (xy 209.797381 136.545833) - (xy 209.797385 136.545838) (xy 209.968912 136.717365) (xy 209.968916 136.717368) (xy 209.968918 136.71737) - (xy 210.161357 136.865033) (xy 210.161361 136.865036) (xy 210.371438 136.986324) (xy 210.59555 137.079154) - (xy 210.829861 137.141938) (xy 211.070362 137.1736) (xy 211.070363 137.1736) (xy 211.312937 137.1736) - (xy 211.312938 137.1736) (xy 211.553439 137.141938) (xy 211.78775 137.079154) (xy 212.011862 136.986324) - (xy 212.221939 136.865036) (xy 212.414388 136.717365) (xy 212.585915 136.545838) (xy 212.733586 136.353389) - (xy 212.854874 136.143312) (xy 212.947704 135.9192) (xy 213.010488 135.684889) (xy 213.04215 135.444388) - (xy 213.04215 135.201812) (xy 213.010488 134.961311) (xy 212.947704 134.727) (xy 212.854874 134.502888) - (xy 212.733586 134.292811) (xy 212.585915 134.100362) (xy 212.414388 133.928835) (xy 212.414383 133.928831) - (xy 212.414381 133.928829) (xy 212.221942 133.781166) (xy 212.18369 133.759081) (xy 212.011862 133.659876) - (xy 212.011858 133.659874) (xy 212.011854 133.659872) (xy 211.787755 133.567048) (xy 211.787754 133.567047) - (xy 211.78775 133.567046) (xy 211.553439 133.504262) (xy 211.553436 133.504261) (xy 211.553434 133.504261) - (xy 211.312939 133.4726) (xy 211.312938 133.4726) (xy 211.070362 133.4726) (xy 211.07036 133.4726) - (xy 210.829868 133.504261) (xy 210.829863 133.504261) (xy 210.595557 133.567044) (xy 210.595544 133.567048) - (xy 210.371445 133.659872) (xy 210.161357 133.781166) (xy 209.968918 133.928829) (xy 209.797379 134.100368) - (xy 209.649716 134.292807) (xy 209.528422 134.502895) (xy 209.435598 134.726994) (xy 209.435594 134.727007) - (xy 209.372811 134.961313) (xy 209.372811 134.961318) (xy 209.34115 135.20181) (xy 193.511183 135.20181) - (xy 193.530495 135.19197) (xy 193.734306 135.043893) (xy 193.912443 134.865756) (xy 194.06052 134.661945) - (xy 194.174891 134.437479) (xy 194.25274 134.197885) (xy 194.256363 134.175013) (xy 194.29215 133.949065) - (xy 194.29215 133.697134) (xy 194.252741 133.448319) (xy 194.187475 133.247451) (xy 194.186114 133.243262) - (xy 194.178797 133.220744) (xy 197.89115 133.220744) (xy 197.89115 133.425455) (xy 197.923171 133.627629) - (xy 197.98643 133.822319) (xy 198.079362 134.004709) (xy 198.079364 134.004713) (xy 198.199679 134.170313) - (xy 198.199681 134.170315) (xy 198.199684 134.170319) (xy 198.344431 134.315066) (xy 198.344434 134.315068) - (xy 198.344436 134.31507) (xy 198.510036 134.435385) (xy 198.51004 134.435387) (xy 198.692431 134.52832) - (xy 198.887116 134.591577) (xy 198.887117 134.591577) (xy 198.88712 134.591578) (xy 199.089295 134.6236) - (xy 199.089298 134.6236) (xy 199.294005 134.6236) (xy 199.496179 134.591578) (xy 199.49618 134.591577) - (xy 199.496184 134.591577) (xy 199.690869 134.52832) (xy 199.87326 134.435387) (xy 200.038869 134.315066) - (xy 200.183616 134.170319) (xy 200.26383 134.059913) (xy 200.303935 134.004713) (xy 200.303937 134.00471) - (xy 200.39687 133.822319) (xy 200.460127 133.627634) (xy 200.469723 133.567048) (xy 200.49215 133.425455) - (xy 200.49215 133.220744) (xy 204.39115 133.220744) (xy 204.39115 133.425455) (xy 204.423171 133.627629) - (xy 204.48643 133.822319) (xy 204.579362 134.004709) (xy 204.579364 134.004713) (xy 204.699679 134.170313) - (xy 204.699681 134.170315) (xy 204.699684 134.170319) (xy 204.844431 134.315066) (xy 204.844434 134.315068) - (xy 204.844436 134.31507) (xy 205.010036 134.435385) (xy 205.01004 134.435387) (xy 205.192431 134.52832) - (xy 205.387116 134.591577) (xy 205.387117 134.591577) (xy 205.38712 134.591578) (xy 205.589295 134.6236) - (xy 205.589298 134.6236) (xy 205.794005 134.6236) (xy 205.996179 134.591578) (xy 205.99618 134.591577) - (xy 205.996184 134.591577) (xy 206.190869 134.52832) (xy 206.37326 134.435387) (xy 206.538869 134.315066) - (xy 206.683616 134.170319) (xy 206.76383 134.059913) (xy 206.803935 134.004713) (xy 206.803937 134.00471) - (xy 206.89687 133.822319) (xy 206.960127 133.627634) (xy 206.969723 133.567048) (xy 206.99215 133.425455) - (xy 206.99215 133.220744) (xy 206.960128 133.01857) (xy 206.948979 132.984257) (xy 206.89687 132.823881) - (xy 206.803937 132.64149) (xy 206.803935 132.641486) (xy 206.68362 132.475886) (xy 206.683618 132.475884) - (xy 206.683616 132.475881) (xy 206.538869 132.331134) (xy 206.538865 132.331131) (xy 206.538863 132.331129) - (xy 206.373263 132.210814) (xy 206.373259 132.210812) (xy 206.190869 132.11788) (xy 205.996179 132.054621) - (xy 205.794005 132.0226) (xy 205.794002 132.0226) (xy 205.589298 132.0226) (xy 205.589295 132.0226) - (xy 205.38712 132.054621) (xy 205.19243 132.11788) (xy 205.01004 132.210812) (xy 205.010036 132.210814) - (xy 204.844436 132.331129) (xy 204.699679 132.475886) (xy 204.579364 132.641486) (xy 204.579362 132.64149) - (xy 204.48643 132.82388) (xy 204.423171 133.01857) (xy 204.39115 133.220744) (xy 200.49215 133.220744) - (xy 200.460128 133.01857) (xy 200.448979 132.984257) (xy 200.39687 132.823881) (xy 200.303937 132.64149) - (xy 200.303935 132.641486) (xy 200.18362 132.475886) (xy 200.183618 132.475884) (xy 200.183616 132.475881) - (xy 200.038869 132.331134) (xy 200.038865 132.331131) (xy 200.038863 132.331129) (xy 199.873263 132.210814) - (xy 199.873259 132.210812) (xy 199.690869 132.11788) (xy 199.496179 132.054621) (xy 199.294005 132.0226) - (xy 199.294002 132.0226) (xy 199.089298 132.0226) (xy 199.089295 132.0226) (xy 198.88712 132.054621) - (xy 198.69243 132.11788) (xy 198.51004 132.210812) (xy 198.510036 132.210814) (xy 198.344436 132.331129) - (xy 198.199679 132.475886) (xy 198.079364 132.641486) (xy 198.079362 132.64149) (xy 197.98643 132.82388) - (xy 197.923171 133.01857) (xy 197.89115 133.220744) (xy 194.178797 133.220744) (xy 194.174891 133.208721) - (xy 194.06052 132.984255) (xy 193.912443 132.780444) (xy 193.734306 132.602307) (xy 193.530495 132.45423) - (xy 193.530494 132.454229) (xy 193.530492 132.454228) (xy 193.306029 132.339859) (xy 193.06643 132.262008) - (xy 192.817615 132.2226) (xy 192.817612 132.2226) (xy 192.565688 132.2226) (xy 192.565685 132.2226) - (xy 192.316869 132.262008) (xy 192.07727 132.339859) (xy 191.852807 132.454228) (xy 191.648995 132.602306) - (xy 191.470856 132.780445) (xy 191.322778 132.984257) (xy 191.208409 133.20872) (xy 191.130558 133.448319) - (xy 191.09115 133.697134) (xy 189.29215 133.697134) (xy 189.252741 133.448319) (xy 189.239884 133.408749) - (xy 189.174891 133.208721) (xy 189.06052 132.984255) (xy 188.912443 132.780444) (xy 188.734306 132.602307) - (xy 188.530495 132.45423) (xy 188.530494 132.454229) (xy 188.530492 132.454228) (xy 188.306029 132.339859) - (xy 188.06643 132.262008) (xy 187.817615 132.2226) (xy 187.817612 132.2226) (xy 187.565688 132.2226) - (xy 187.565685 132.2226) (xy 187.316869 132.262008) (xy 187.07727 132.339859) (xy 186.852807 132.454228) - (xy 186.648995 132.602306) (xy 186.470856 132.780445) (xy 186.322778 132.984257) (xy 186.208409 133.20872) - (xy 186.130558 133.448319) (xy 186.09115 133.697134) (xy 184.29215 133.697134) (xy 184.252741 133.448319) - (xy 184.239884 133.408749) (xy 184.174891 133.208721) (xy 184.06052 132.984255) (xy 183.912443 132.780444) - (xy 183.734306 132.602307) (xy 183.530495 132.45423) (xy 183.530494 132.454229) (xy 183.530492 132.454228) - (xy 183.306029 132.339859) (xy 183.06643 132.262008) (xy 182.817615 132.2226) (xy 182.817612 132.2226) - (xy 182.565688 132.2226) (xy 182.565685 132.2226) (xy 182.316869 132.262008) (xy 182.07727 132.339859) - (xy 181.852807 132.454228) (xy 181.648995 132.602306) (xy 181.470856 132.780445) (xy 181.322778 132.984257) - (xy 181.208409 133.20872) (xy 181.130558 133.448319) (xy 181.09115 133.697134) (xy 179.490598 133.697134) + (xy 179.49165 133.941077) (xy 179.49165 133.708939) (xy 181.24115 133.708939) (xy 181.24115 133.93726) + (xy 181.276864 134.162755) (xy 181.347419 134.379899) (xy 181.45107 134.583327) (xy 181.451074 134.583333) + (xy 181.585266 134.768031) (xy 181.585268 134.768033) (xy 181.585271 134.768037) (xy 181.746713 134.929479) + (xy 181.746716 134.929481) (xy 181.746718 134.929483) (xy 181.900591 135.041279) (xy 181.931422 135.063679) + (xy 182.134851 135.167331) (xy 182.35199 135.237884) (xy 182.351991 135.237884) (xy 182.351994 135.237885) + (xy 182.57749 135.2736) (xy 182.577493 135.2736) (xy 182.80581 135.2736) (xy 183.031305 135.237885) + (xy 183.031306 135.237884) (xy 183.03131 135.237884) (xy 183.248449 135.167331) (xy 183.451878 135.063679) + (xy 183.636587 134.929479) (xy 183.798029 134.768037) (xy 183.932229 134.583328) (xy 184.035881 134.379899) + (xy 184.106434 134.16276) (xy 184.126669 134.035) (xy 184.14215 133.93726) (xy 184.14215 133.708939) + (xy 186.24115 133.708939) (xy 186.24115 133.93726) (xy 186.276864 134.162755) (xy 186.347419 134.379899) + (xy 186.45107 134.583327) (xy 186.451074 134.583333) (xy 186.585266 134.768031) (xy 186.585268 134.768033) + (xy 186.585271 134.768037) (xy 186.746713 134.929479) (xy 186.746716 134.929481) (xy 186.746718 134.929483) + (xy 186.900591 135.041279) (xy 186.931422 135.063679) (xy 187.134851 135.167331) (xy 187.35199 135.237884) + (xy 187.351991 135.237884) (xy 187.351994 135.237885) (xy 187.57749 135.2736) (xy 187.577493 135.2736) + (xy 187.80581 135.2736) (xy 188.031305 135.237885) (xy 188.031306 135.237884) (xy 188.03131 135.237884) + (xy 188.248449 135.167331) (xy 188.451878 135.063679) (xy 188.636587 134.929479) (xy 188.798029 134.768037) + (xy 188.932229 134.583328) (xy 189.035881 134.379899) (xy 189.106434 134.16276) (xy 189.126669 134.035) + (xy 189.14215 133.93726) (xy 189.14215 133.708939) (xy 191.24115 133.708939) (xy 191.24115 133.93726) + (xy 191.276864 134.162755) (xy 191.347419 134.379899) (xy 191.45107 134.583327) (xy 191.451074 134.583333) + (xy 191.585266 134.768031) (xy 191.585268 134.768033) (xy 191.585271 134.768037) (xy 191.746713 134.929479) + (xy 191.746716 134.929481) (xy 191.746718 134.929483) (xy 191.900591 135.041279) (xy 191.931422 135.063679) + (xy 192.134851 135.167331) (xy 192.35199 135.237884) (xy 192.351991 135.237884) (xy 192.351994 135.237885) + (xy 192.57749 135.2736) (xy 192.577493 135.2736) (xy 192.80581 135.2736) (xy 193.031305 135.237885) + (xy 193.031306 135.237884) (xy 193.03131 135.237884) (xy 193.142334 135.20181) (xy 209.34115 135.20181) + (xy 209.34115 135.444389) (xy 209.372811 135.684881) (xy 209.372811 135.684886) (xy 209.372812 135.684889) + (xy 209.435517 135.918907) (xy 209.435594 135.919192) (xy 209.435598 135.919205) (xy 209.528422 136.143304) + (xy 209.528424 136.143308) (xy 209.528426 136.143312) (xy 209.643191 136.34209) (xy 209.649716 136.353392) + (xy 209.797379 136.545831) (xy 209.797381 136.545833) (xy 209.797385 136.545838) (xy 209.968912 136.717365) + (xy 209.968916 136.717368) (xy 209.968918 136.71737) (xy 210.161357 136.865033) (xy 210.161361 136.865036) + (xy 210.371438 136.986324) (xy 210.59555 137.079154) (xy 210.829861 137.141938) (xy 211.070362 137.1736) + (xy 211.070363 137.1736) (xy 211.312937 137.1736) (xy 211.312938 137.1736) (xy 211.553439 137.141938) + (xy 211.78775 137.079154) (xy 212.011862 136.986324) (xy 212.221939 136.865036) (xy 212.414388 136.717365) + (xy 212.585915 136.545838) (xy 212.733586 136.353389) (xy 212.854874 136.143312) (xy 212.947704 135.9192) + (xy 213.010488 135.684889) (xy 213.04215 135.444388) (xy 213.04215 135.201812) (xy 213.010488 134.961311) + (xy 212.947704 134.727) (xy 212.854874 134.502888) (xy 212.733586 134.292811) (xy 212.585915 134.100362) + (xy 212.414388 133.928835) (xy 212.414383 133.928831) (xy 212.414381 133.928829) (xy 212.221942 133.781166) + (xy 212.19349 133.764739) (xy 212.011862 133.659876) (xy 212.011858 133.659874) (xy 212.011854 133.659872) + (xy 211.787755 133.567048) (xy 211.787754 133.567047) (xy 211.78775 133.567046) (xy 211.553439 133.504262) + (xy 211.553436 133.504261) (xy 211.553434 133.504261) (xy 211.312939 133.4726) (xy 211.312938 133.4726) + (xy 211.070362 133.4726) (xy 211.07036 133.4726) (xy 210.829868 133.504261) (xy 210.829863 133.504261) + (xy 210.595557 133.567044) (xy 210.595544 133.567048) (xy 210.371445 133.659872) (xy 210.161357 133.781166) + (xy 209.968918 133.928829) (xy 209.797379 134.100368) (xy 209.649716 134.292807) (xy 209.528422 134.502895) + (xy 209.435598 134.726994) (xy 209.435594 134.727007) (xy 209.372811 134.961313) (xy 209.372811 134.961318) + (xy 209.34115 135.20181) (xy 193.142334 135.20181) (xy 193.248449 135.167331) (xy 193.451878 135.063679) + (xy 193.636587 134.929479) (xy 193.798029 134.768037) (xy 193.932229 134.583328) (xy 194.035881 134.379899) + (xy 194.106434 134.16276) (xy 194.126669 134.035) (xy 194.14215 133.93726) (xy 194.14215 133.708939) + (xy 194.106435 133.483444) (xy 194.082165 133.408749) (xy 194.035881 133.266301) (xy 194.018684 133.23255) + (xy 198.04115 133.23255) (xy 198.04115 133.413649) (xy 198.069478 133.592506) (xy 198.1236 133.759081) + (xy 198.125439 133.764739) (xy 198.207654 133.926094) (xy 198.314097 134.072601) (xy 198.442149 134.200653) + (xy 198.588656 134.307096) (xy 198.750011 134.389311) (xy 198.922241 134.445271) (xy 198.993786 134.456602) + (xy 199.101101 134.4736) (xy 199.101104 134.4736) (xy 199.282199 134.4736) (xy 199.371627 134.459435) + (xy 199.461059 134.445271) (xy 199.633289 134.389311) (xy 199.794644 134.307096) (xy 199.941151 134.200653) + (xy 200.069203 134.072601) (xy 200.175646 133.926094) (xy 200.257861 133.764739) (xy 200.313821 133.592509) + (xy 200.34215 133.413646) (xy 200.34215 133.232554) (xy 200.34215 133.23255) (xy 204.54115 133.23255) + (xy 204.54115 133.413649) (xy 204.569478 133.592506) (xy 204.6236 133.759081) (xy 204.625439 133.764739) + (xy 204.707654 133.926094) (xy 204.814097 134.072601) (xy 204.942149 134.200653) (xy 205.088656 134.307096) + (xy 205.250011 134.389311) (xy 205.422241 134.445271) (xy 205.493786 134.456602) (xy 205.601101 134.4736) + (xy 205.601104 134.4736) (xy 205.782199 134.4736) (xy 205.871627 134.459435) (xy 205.961059 134.445271) + (xy 206.133289 134.389311) (xy 206.294644 134.307096) (xy 206.441151 134.200653) (xy 206.569203 134.072601) + (xy 206.675646 133.926094) (xy 206.757861 133.764739) (xy 206.813821 133.592509) (xy 206.84215 133.413646) + (xy 206.84215 133.232554) (xy 206.84215 133.23255) (xy 206.813821 133.053693) (xy 206.813821 133.053691) + (xy 206.757861 132.881461) (xy 206.675646 132.720106) (xy 206.569203 132.573599) (xy 206.441151 132.445547) + (xy 206.294644 132.339104) (xy 206.294643 132.339103) (xy 206.294641 132.339102) (xy 206.133287 132.256888) + (xy 205.961056 132.200928) (xy 205.782199 132.1726) (xy 205.782196 132.1726) (xy 205.601104 132.1726) + (xy 205.601101 132.1726) (xy 205.422243 132.200928) (xy 205.250012 132.256888) (xy 205.088658 132.339102) + (xy 205.042552 132.3726) (xy 204.942149 132.445547) (xy 204.814097 132.573599) (xy 204.807616 132.58252) + (xy 204.707652 132.720108) (xy 204.625438 132.881462) (xy 204.569478 133.053693) (xy 204.54115 133.23255) + (xy 200.34215 133.23255) (xy 200.313821 133.053693) (xy 200.313821 133.053691) (xy 200.257861 132.881461) + (xy 200.175646 132.720106) (xy 200.069203 132.573599) (xy 199.941151 132.445547) (xy 199.794644 132.339104) + (xy 199.794643 132.339103) (xy 199.794641 132.339102) (xy 199.633287 132.256888) (xy 199.461056 132.200928) + (xy 199.282199 132.1726) (xy 199.282196 132.1726) (xy 199.101104 132.1726) (xy 199.101101 132.1726) + (xy 198.922243 132.200928) (xy 198.750012 132.256888) (xy 198.588658 132.339102) (xy 198.542552 132.3726) + (xy 198.442149 132.445547) (xy 198.314097 132.573599) (xy 198.307616 132.58252) (xy 198.207652 132.720108) + (xy 198.125438 132.881462) (xy 198.069478 133.053693) (xy 198.04115 133.23255) (xy 194.018684 133.23255) + (xy 193.932229 133.062872) (xy 193.904913 133.025275) (xy 193.798033 132.878168) (xy 193.798031 132.878166) + (xy 193.798029 132.878163) (xy 193.636587 132.716721) (xy 193.636583 132.716718) (xy 193.636581 132.716716) + (xy 193.451883 132.582524) (xy 193.451877 132.58252) (xy 193.248449 132.478869) (xy 193.031305 132.408314) + (xy 192.80581 132.3726) (xy 192.805807 132.3726) (xy 192.577493 132.3726) (xy 192.57749 132.3726) + (xy 192.351994 132.408314) (xy 192.13485 132.478869) (xy 191.931422 132.58252) (xy 191.931416 132.582524) + (xy 191.746718 132.716716) (xy 191.585266 132.878168) (xy 191.451074 133.062866) (xy 191.45107 133.062872) + (xy 191.347419 133.2663) (xy 191.276864 133.483444) (xy 191.24115 133.708939) (xy 189.14215 133.708939) + (xy 189.106435 133.483444) (xy 189.082165 133.408749) (xy 189.035881 133.266301) (xy 188.932229 133.062872) + (xy 188.904913 133.025275) (xy 188.798033 132.878168) (xy 188.798031 132.878166) (xy 188.798029 132.878163) + (xy 188.636587 132.716721) (xy 188.636583 132.716718) (xy 188.636581 132.716716) (xy 188.451883 132.582524) + (xy 188.451877 132.58252) (xy 188.248449 132.478869) (xy 188.031305 132.408314) (xy 187.80581 132.3726) + (xy 187.805807 132.3726) (xy 187.577493 132.3726) (xy 187.57749 132.3726) (xy 187.351994 132.408314) + (xy 187.13485 132.478869) (xy 186.931422 132.58252) (xy 186.931416 132.582524) (xy 186.746718 132.716716) + (xy 186.585266 132.878168) (xy 186.451074 133.062866) (xy 186.45107 133.062872) (xy 186.347419 133.2663) + (xy 186.276864 133.483444) (xy 186.24115 133.708939) (xy 184.14215 133.708939) (xy 184.106435 133.483444) + (xy 184.082165 133.408749) (xy 184.035881 133.266301) (xy 183.932229 133.062872) (xy 183.904913 133.025275) + (xy 183.798033 132.878168) (xy 183.798031 132.878166) (xy 183.798029 132.878163) (xy 183.636587 132.716721) + (xy 183.636583 132.716718) (xy 183.636581 132.716716) (xy 183.451883 132.582524) (xy 183.451877 132.58252) + (xy 183.248449 132.478869) (xy 183.031305 132.408314) (xy 182.80581 132.3726) (xy 182.805807 132.3726) + (xy 182.577493 132.3726) (xy 182.57749 132.3726) (xy 182.351994 132.408314) (xy 182.13485 132.478869) + (xy 181.931422 132.58252) (xy 181.931416 132.582524) (xy 181.746718 132.716716) (xy 181.585266 132.878168) + (xy 181.451074 133.062866) (xy 181.45107 133.062872) (xy 181.347419 133.2663) (xy 181.276864 133.483444) + (xy 181.24115 133.708939) (xy 179.49165 133.708939) (xy 179.49165 133.705123) (xy 179.491649 133.705121) (xy 179.460851 133.471191) (xy 179.460851 133.471186) (xy 179.399782 133.243275) (xy 179.399778 133.243262) (xy 179.309486 133.025275) (xy 179.309484 133.02527) (xy 179.191507 132.82093) (xy 179.128928 132.739374) (xy 178.292691 133.57561) (xy 178.267672 133.51521) (xy 178.196538 133.408749) (xy 178.106001 133.318212) @@ -41702,803 +46642,1052 @@ (xy 177.444162 133.222058) (xy 177.38376 133.247078) (xy 177.277299 133.318212) (xy 177.186762 133.408749) (xy 177.115628 133.51521) (xy 177.090608 133.575612) (xy 176.25437 132.739374) (xy 176.191791 132.820931) (xy 176.073815 133.02527) (xy 176.073813 133.025275) (xy 175.983521 133.243262) (xy 175.983517 133.243275) - (xy 175.922448 133.471186) (xy 175.922448 133.471191) (xy 175.89165 133.705121) (xy 174.29215 133.705121) - (xy 174.29215 132.729998) (xy 174.281527 132.641536) (xy 174.226011 132.500758) (xy 174.134572 132.380178) - (xy 174.013992 132.288739) (xy 174.013991 132.288738) (xy 174.013989 132.288737) (xy 173.873215 132.233223) - (xy 173.784756 132.2226) (xy 173.784752 132.2226) (xy 171.598548 132.2226) (xy 171.598543 132.2226) - (xy 171.510084 132.233223) (xy 171.36931 132.288737) (xy 171.369306 132.28874) (xy 171.248731 132.380175) - (xy 171.248725 132.380181) (xy 171.15729 132.500756) (xy 171.157287 132.50076) (xy 171.101773 132.641534) - (xy 171.09115 132.729993) (xy 80.854823 132.729993) (xy 80.854429 132.339859) (xy 80.852728 130.656501) - (xy 80.850789 128.73823) (xy 114.15115 128.73823) (xy 114.15115 130.42796) (xy 114.151151 130.427963) - (xy 114.154064 130.45309) (xy 114.179406 130.510485) (xy 114.199444 130.555865) (xy 114.278885 130.635306) - (xy 114.381659 130.680685) (xy 114.406785 130.6836) (xy 116.096514 130.683599) (xy 116.121641 130.680685) - (xy 116.224415 130.635306) (xy 116.303856 130.555865) (xy 116.349235 130.453091) (xy 116.35215 130.427965) - (xy 116.352149 128.738236) (xy 116.349235 128.713109) (xy 116.303856 128.610335) (xy 116.224415 128.530894) - (xy 116.121641 128.485515) (xy 116.12164 128.485514) (xy 116.121638 128.485514) (xy 116.096518 128.4826) - (xy 114.406789 128.4826) (xy 114.406786 128.482601) (xy 114.381659 128.485514) (xy 114.278885 128.530894) - (xy 114.199444 128.610335) (xy 114.154064 128.713111) (xy 114.15115 128.73823) (xy 80.850789 128.73823) - (xy 80.828838 107.0231) (xy 90.581854 107.0231) (xy 90.582049 107.025586) (xy 90.582051 107.025593) - (xy 90.627869 107.1833) (xy 90.627869 107.183301) (xy 90.711464 107.324652) (xy 90.827597 107.440785) - (xy 90.968949 107.52438) (xy 91.12666 107.5702) (xy 91.163513 107.5731) (xy 91.566649 107.5731) - (xy 91.56665 107.573099) (xy 91.56665 107.023101) (xy 91.566649 107.0231) (xy 90.581854 107.0231) - (xy 80.828838 107.0231) (xy 80.828333 106.5231) (xy 90.581854 106.5231) (xy 91.566649 106.5231) - (xy 91.56665 106.523099) (xy 91.56665 105.973101) (xy 91.566649 105.9731) (xy 91.163513 105.9731) - (xy 91.12666 105.975999) (xy 90.968949 106.021819) (xy 90.968948 106.021819) (xy 90.827597 106.105414) - (xy 90.711464 106.221547) (xy 90.627869 106.362898) (xy 90.627869 106.362899) (xy 90.582051 106.520606) - (xy 90.582049 106.520613) (xy 90.581854 106.5231) (xy 80.828333 106.5231) (xy 80.795493 74.034243) - (xy 97.48215 74.034243) (xy 97.48215 74.192357) (xy 97.523073 74.345084) (xy 97.60213 74.482016) - (xy 97.713934 74.59382) (xy 97.850866 74.672877) (xy 98.003593 74.7138) (xy 98.003595 74.7138) (xy 98.161705 74.7138) - (xy 98.161707 74.7138) (xy 98.314434 74.672877) (xy 98.451366 74.59382) (xy 98.56317 74.482016) - (xy 98.642227 74.345084) (xy 98.68315 74.192357) (xy 98.68315 74.034243) (xy 98.642227 73.881516) - (xy 98.56317 73.744584) (xy 98.451366 73.63278) (xy 98.314434 73.553723) (xy 98.161707 73.5128) - (xy 98.003593 73.5128) (xy 97.850866 73.553723) (xy 97.713934 73.63278) (xy 97.60213 73.744584) - (xy 97.523073 73.881516) (xy 97.48215 74.034243) (xy 80.795493 74.034243) (xy 80.779701 58.411755) - (xy 82.46365 58.411755) (xy 82.46365 62.057044) (xy 82.494413 62.211696) (xy 82.494413 62.211698) - (xy 82.554753 62.357374) (xy 82.554759 62.357385) (xy 82.59498 62.417579) (xy 82.642361 62.488489) - (xy 84.389561 64.235689) (xy 84.501061 64.347189) (xy 84.565647 64.390344) (xy 84.632164 64.43479) - (xy 84.632175 64.434796) (xy 84.656919 64.445045) (xy 84.777853 64.495137) (xy 84.932508 64.5259) - (xy 86.09215 64.5259) (xy 86.150341 64.544807) (xy 86.186305 64.594307) (xy 86.19115 64.6249) (xy 86.19115 70.6236) - (xy 86.172243 70.681791) (xy 86.122743 70.717755) (xy 86.09215 70.7226) (xy 85.448543 70.7226) (xy 85.360084 70.733223) - (xy 85.21931 70.788737) (xy 85.219306 70.78874) (xy 85.098731 70.880175) (xy 85.098725 70.880181) - (xy 85.00729 71.000756) (xy 85.007287 71.00076) (xy 84.951773 71.141534) (xy 84.94115 71.229993) - (xy 84.94115 72.416206) (xy 84.951773 72.504665) (xy 85.007287 72.645439) (xy 85.007288 72.645441) - (xy 85.007289 72.645442) (xy 85.098728 72.766022) (xy 85.219308 72.857461) (xy 85.219309 72.857461) - (xy 85.21931 72.857462) (xy 85.261298 72.87402) (xy 85.360086 72.912977) (xy 85.448548 72.9236) - (xy 85.44855 72.9236) (xy 88.53475 72.9236) (xy 88.534752 72.9236) (xy 88.623214 72.912977) (xy 88.763992 72.857461) - (xy 88.884572 72.766022) (xy 88.976011 72.645442) (xy 89.031527 72.504664) (xy 89.04215 72.416202) - (xy 89.04215 72.073101) (xy 90.141651 72.073101) (xy 90.141651 72.423086) (xy 90.152142 72.525787) - (xy 90.152145 72.525799) (xy 90.207293 72.692224) (xy 90.29933 72.84144) (xy 90.423309 72.965419) - (xy 90.572525 73.057456) (xy 90.738956 73.112606) (xy 90.841662 73.123099) (xy 92.141648 73.123099) - (xy 92.14165 73.123098) (xy 92.14165 72.073101) (xy 92.64165 72.073101) (xy 92.64165 73.123098) - (xy 92.641651 73.123099) (xy 93.941636 73.123099) (xy 94.044337 73.112607) (xy 94.044349 73.112604) - (xy 94.210774 73.057456) (xy 94.35999 72.965419) (xy 94.483969 72.84144) (xy 94.576006 72.692224) - (xy 94.631156 72.525793) (xy 94.64165 72.423087) (xy 94.64165 72.087543) (xy 95.88055 72.087543) - (xy 95.88055 72.245657) (xy 95.921473 72.398384) (xy 96.00053 72.535316) (xy 96.112334 72.64712) - (xy 96.249266 72.726177) (xy 96.401993 72.7671) (xy 96.401995 72.7671) (xy 96.560105 72.7671) (xy 96.560107 72.7671) - (xy 96.712834 72.726177) (xy 96.849766 72.64712) (xy 96.96157 72.535316) (xy 97.040627 72.398384) - (xy 97.08155 72.245657) (xy 97.08155 72.087543) (xy 97.040627 71.934816) (xy 96.96157 71.797884) - (xy 96.849766 71.68608) (xy 96.712834 71.607023) (xy 96.560107 71.5661) (xy 96.401993 71.5661) (xy 96.249266 71.607023) - (xy 96.112334 71.68608) (xy 96.00053 71.797884) (xy 95.921473 71.934816) (xy 95.88055 72.087543) - (xy 94.64165 72.087543) (xy 94.64165 72.073101) (xy 94.641649 72.0731) (xy 92.641651 72.0731) (xy 92.64165 72.073101) - (xy 92.14165 72.073101) (xy 92.141649 72.0731) (xy 90.141652 72.0731) (xy 90.141651 72.073101) (xy 89.04215 72.073101) - (xy 89.04215 71.229998) (xy 89.041323 71.223112) (xy 90.14165 71.223112) (xy 90.14165 71.573099) - (xy 90.141651 71.5731) (xy 92.141649 71.5731) (xy 92.14165 71.573099) (xy 92.14165 70.523101) (xy 92.64165 70.523101) - (xy 92.64165 71.573099) (xy 92.641651 71.5731) (xy 94.641648 71.5731) (xy 94.641649 71.573099) (xy 94.641649 71.223113) - (xy 94.631157 71.120412) (xy 94.631154 71.1204) (xy 94.587773 70.989484) (xy 94.587417 70.9283) - (xy 94.611743 70.888342) (xy 94.71877 70.781316) (xy 94.797827 70.644384) (xy 94.83875 70.491657) - (xy 94.83875 70.333543) (xy 94.797827 70.180816) (xy 94.71877 70.043884) (xy 94.606966 69.93208) - (xy 94.470034 69.853023) (xy 94.317307 69.8121) (xy 94.159193 69.8121) (xy 94.006466 69.853023) - (xy 93.869534 69.93208) (xy 93.75773 70.043884) (xy 93.678673 70.180816) (xy 93.63775 70.333544) - (xy 93.63775 70.4241) (xy 93.618843 70.482291) (xy 93.569343 70.518255) (xy 93.53875 70.5231) (xy 92.641651 70.5231) - (xy 92.64165 70.523101) (xy 92.14165 70.523101) (xy 92.141649 70.5231) (xy 90.841663 70.5231) (xy 90.738962 70.533592) - (xy 90.73895 70.533595) (xy 90.572525 70.588743) (xy 90.423309 70.68078) (xy 90.29933 70.804759) - (xy 90.207293 70.953975) (xy 90.152143 71.120406) (xy 90.14165 71.223112) (xy 89.041323 71.223112) - (xy 89.031527 71.141536) (xy 89.023197 71.120412) (xy 88.976012 71.00076) (xy 88.976011 71.000759) - (xy 88.976011 71.000758) (xy 88.884572 70.880178) (xy 88.763992 70.788739) (xy 88.763991 70.788738) - (xy 88.763989 70.788737) (xy 88.623215 70.733223) (xy 88.534756 70.7226) (xy 88.534752 70.7226) - (xy 87.89115 70.7226) (xy 87.832959 70.703693) (xy 87.796995 70.654193) (xy 87.79215 70.6236) (xy 87.79215 67.621843) - (xy 91.59805 67.621843) (xy 91.59805 67.779957) (xy 91.638973 67.932684) (xy 91.71803 68.069616) - (xy 91.829834 68.18142) (xy 91.966766 68.260477) (xy 92.119493 68.3014) (xy 92.119495 68.3014) (xy 92.261819 68.3014) - (xy 92.32001 68.320307) (xy 92.355974 68.369807) (xy 92.357445 68.426021) (xy 92.32885 68.532743) - (xy 92.32885 68.690857) (xy 92.369773 68.843584) (xy 92.44883 68.980516) (xy 92.560634 69.09232) - (xy 92.697566 69.171377) (xy 92.850293 69.2123) (xy 92.850295 69.2123) (xy 93.008405 69.2123) (xy 93.008407 69.2123) - (xy 93.161134 69.171377) (xy 93.298066 69.09232) (xy 93.40987 68.980516) (xy 93.488927 68.843584) - (xy 93.52985 68.690857) (xy 93.52985 68.532743) (xy 93.488927 68.380016) (xy 93.40987 68.243084) - (xy 93.298066 68.13128) (xy 93.161134 68.052223) (xy 93.008407 68.0113) (xy 92.866081 68.0113) (xy 92.80789 67.992393) - (xy 92.771926 67.942893) (xy 92.770454 67.886678) (xy 92.79905 67.779957) (xy 92.79905 67.621843) - (xy 92.758127 67.469116) (xy 92.67907 67.332184) (xy 92.567266 67.22038) (xy 92.430334 67.141323) - (xy 92.277607 67.1004) (xy 92.119493 67.1004) (xy 91.966766 67.141323) (xy 91.829834 67.22038) (xy 91.71803 67.332184) - (xy 91.638973 67.469116) (xy 91.59805 67.621843) (xy 87.79215 67.621843) (xy 87.79215 64.6249) (xy 87.811057 64.566709) - (xy 87.860557 64.530745) (xy 87.89115 64.5259) (xy 98.935691 64.5259) (xy 98.935692 64.5259) (xy 99.090347 64.495137) - (xy 99.236029 64.434794) (xy 99.367139 64.347189) (xy 100.059146 63.655182) (xy 100.113663 63.627405) - (xy 100.174095 63.636976) (xy 100.199154 63.655182) (xy 103.331261 66.787289) (xy 103.442761 66.898789) - (xy 103.451137 66.904386) (xy 103.489016 66.952434) (xy 103.491418 67.013572) (xy 103.457426 67.064446) - (xy 103.400022 67.085624) (xy 103.396135 67.0857) (xy 102.431277 67.0857) (xy 102.325823 67.0857) - (xy 102.270961 67.1004) (xy 102.223957 67.112994) (xy 102.132641 67.165716) (xy 102.132636 67.16572) - (xy 100.77975 68.518604) (xy 100.725234 68.546381) (xy 100.709747 68.5476) (xy 100.293783 68.5476) - (xy 100.293779 68.5476) (xy 100.293778 68.547601) (xy 100.286599 68.548372) (xy 100.234169 68.554008) - (xy 100.234164 68.554009) (xy 100.09932 68.604302) (xy 99.984108 68.69055) (xy 99.9841 68.690558) - (xy 99.897852 68.80577) (xy 99.84756 68.940611) (xy 99.847558 68.940622) (xy 99.84115 69.000229) - (xy 99.84115 69.645966) (xy 99.841151 69.64597) (xy 99.847558 69.70558) (xy 99.847559 69.705585) - (xy 99.897852 69.840429) (xy 99.90728 69.853023) (xy 99.984104 69.955646) (xy 99.984107 69.955648) - (xy 99.984108 69.955649) (xy 100.101479 70.043513) (xy 100.136732 70.093521) (xy 100.14115 70.122766) - (xy 100.14115 72.807773) (xy 100.14115 72.913227) (xy 100.161139 72.987828) (xy 100.168444 73.015092) - (xy 100.221166 73.106408) (xy 100.221168 73.10641) (xy 100.22117 73.106413) (xy 100.29858 73.183823) - (xy 100.326357 73.238339) (xy 100.316786 73.298771) (xy 100.273521 73.342036) (xy 100.237535 73.35242) - (xy 100.214546 73.354508) (xy 100.21454 73.35451) (xy 100.052257 73.405079) (xy 100.052249 73.405082) - (xy 99.906777 73.493024) (xy 99.786574 73.613227) (xy 99.698632 73.758699) (xy 99.698629 73.758707) - (xy 99.64806 73.920989) (xy 99.648058 73.920995) (xy 99.64165 73.991518) (xy 99.64165 74.073099) - (xy 99.641651 74.0731) (xy 100.44265 74.0731) (xy 100.500841 74.092007) (xy 100.536805 74.141507) - (xy 100.54165 74.1721) (xy 100.54165 74.4741) (xy 100.522743 74.532291) (xy 100.473243 74.568255) - (xy 100.44265 74.5731) (xy 99.641652 74.5731) (xy 99.641651 74.573101) (xy 99.641651 74.654682) + (xy 175.922448 133.471186) (xy 175.922448 133.471191) (xy 175.89165 133.705121) (xy 174.142149 133.705121) + (xy 174.142149 132.741582) (xy 174.142149 132.741581) (xy 174.142149 132.741578) (xy 174.142148 132.741576) + (xy 174.127297 132.6478) (xy 174.127296 132.647798) (xy 174.127296 132.647796) (xy 174.0697 132.534758) + (xy 173.979992 132.44505) (xy 173.866954 132.387454) (xy 173.866955 132.387454) (xy 173.773171 132.3726) + (xy 171.610128 132.3726) (xy 171.610126 132.372601) (xy 171.51635 132.387452) (xy 171.516345 132.387454) + (xy 171.403309 132.445049) (xy 171.313599 132.534759) (xy 171.256004 132.647795) (xy 171.24115 132.741578) + (xy 169.175081 132.741578) (xy 169.080593 132.64709) (xy 169.080589 132.647087) (xy 168.925001 132.543124) + (xy 168.924992 132.54312) (xy 168.752105 132.471508) (xy 168.725 132.466116) (xy 168.725 133.218011) + (xy 168.71506 133.200795) (xy 168.659205 133.14494) (xy 168.590796 133.105444) (xy 168.514496 133.085) + (xy 168.435504 133.085) (xy 168.359204 133.105444) (xy 168.290795 133.14494) (xy 168.23494 133.200795) + (xy 168.225 133.218011) (xy 168.225 132.466116) (xy 168.197894 132.471508) (xy 168.025007 132.54312) + (xy 168.024998 132.543124) (xy 167.86941 132.647087) (xy 167.869406 132.64709) (xy 167.73709 132.779406) + (xy 167.737087 132.77941) (xy 167.633124 132.934998) (xy 167.633118 132.93501) (xy 167.561508 133.107893) + (xy 167.561508 133.107895) (xy 167.525 133.29143) (xy 160.774999 133.29143) (xy 160.738491 133.107895) + (xy 160.738491 133.107893) (xy 160.666881 132.93501) (xy 160.666875 132.934998) (xy 160.562912 132.77941) + (xy 160.562909 132.779406) (xy 160.430593 132.64709) (xy 160.430589 132.647087) (xy 160.275001 132.543124) + (xy 160.274992 132.54312) (xy 160.102105 132.471508) (xy 160.075 132.466116) (xy 160.075 133.218011) + (xy 160.06506 133.200795) (xy 160.009205 133.14494) (xy 159.940796 133.105444) (xy 159.864496 133.085) + (xy 159.785504 133.085) (xy 159.709204 133.105444) (xy 159.640795 133.14494) (xy 159.58494 133.200795) + (xy 159.575 133.218011) (xy 159.575 132.466116) (xy 159.547894 132.471508) (xy 159.375007 132.54312) + (xy 159.374998 132.543124) (xy 159.21941 132.647087) (xy 159.219406 132.64709) (xy 159.08709 132.779406) + (xy 159.087087 132.77941) (xy 158.983124 132.934998) (xy 158.983118 132.93501) (xy 158.911508 133.107893) + (xy 158.911508 133.107895) (xy 158.875 133.29143) (xy 80.855391 133.29143) (xy 80.850819 128.768272) + (xy 114.30115 128.768272) (xy 114.30115 130.397927) (xy 114.309882 130.44182) (xy 114.309884 130.441824) + (xy 114.327167 130.46769) (xy 114.343146 130.491604) (xy 114.392928 130.524867) (xy 114.403977 130.527064) + (xy 114.436822 130.533599) (xy 114.436828 130.533599) (xy 114.43683 130.5336) (xy 114.436831 130.5336) + (xy 116.066469 130.5336) (xy 116.06647 130.5336) (xy 116.066471 130.533599) (xy 116.066477 130.533599) + (xy 116.088273 130.529262) (xy 116.110372 130.524867) (xy 116.160154 130.491604) (xy 116.193417 130.441822) + (xy 116.20215 130.39792) (xy 116.20215 128.76828) (xy 116.202149 128.768278) (xy 116.202149 128.768272) + (xy 116.193417 128.724379) (xy 116.193415 128.724375) (xy 116.160155 128.674598) (xy 116.160154 128.674596) + (xy 116.144004 128.663805) (xy 116.110374 128.641334) (xy 116.11037 128.641332) (xy 116.066477 128.6326) + (xy 116.06647 128.6326) (xy 114.43683 128.6326) (xy 114.436822 128.6326) (xy 114.392929 128.641332) + (xy 114.392925 128.641334) (xy 114.343148 128.674594) (xy 114.343144 128.674598) (xy 114.309884 128.724375) + (xy 114.309882 128.724379) (xy 114.30115 128.768272) (xy 80.850819 128.768272) (xy 80.828838 107.0231) + (xy 90.581854 107.0231) (xy 90.582049 107.025586) (xy 90.582051 107.025593) (xy 90.627869 107.1833) + (xy 90.627869 107.183301) (xy 90.711464 107.324652) (xy 90.827597 107.440785) (xy 90.968949 107.52438) + (xy 91.12666 107.5702) (xy 91.163513 107.5731) (xy 91.566649 107.5731) (xy 91.56665 107.573099) + (xy 91.56665 107.023101) (xy 91.566649 107.0231) (xy 90.581854 107.0231) (xy 80.828838 107.0231) + (xy 80.828333 106.5231) (xy 90.581854 106.5231) (xy 91.566649 106.5231) (xy 91.56665 106.523099) + (xy 91.56665 105.973101) (xy 91.566649 105.9731) (xy 91.163513 105.9731) (xy 91.12666 105.975999) + (xy 90.968949 106.021819) (xy 90.968948 106.021819) (xy 90.827597 106.105414) (xy 90.711464 106.221547) + (xy 90.627869 106.362898) (xy 90.627869 106.362899) (xy 90.582051 106.520606) (xy 90.582049 106.520613) + (xy 90.581854 106.5231) (xy 80.828333 106.5231) (xy 80.804467 82.912464) (xy 92.94115 82.912464) + (xy 92.94115 83.733736) (xy 92.945674 83.764789) (xy 92.951784 83.806726) (xy 92.987323 83.879421) + (xy 93.006824 83.919311) (xy 93.095439 84.007926) (xy 93.208025 84.062966) (xy 93.281014 84.0736) + (xy 93.425882 84.0736) (xy 93.484073 84.092507) (xy 93.495885 84.102596) (xy 93.586489 84.1932) + (xy 93.669653 84.276363) (xy 93.697431 84.33088) (xy 93.69865 84.346367) (xy 93.69865 84.460909) + (xy 93.717884 84.53269) (xy 93.729352 84.57549) (xy 93.788657 84.678208) (xy 93.788659 84.67821) + (xy 93.788661 84.678213) (xy 93.872537 84.762089) (xy 93.872539 84.76209) (xy 93.872541 84.762092) + (xy 93.97526 84.821397) (xy 93.975261 84.821397) (xy 93.975264 84.821399) (xy 94.089841 84.8521) + (xy 94.089843 84.8521) (xy 94.208457 84.8521) (xy 94.208459 84.8521) (xy 94.323036 84.821399) (xy 94.323038 84.821397) + (xy 94.32304 84.821397) (xy 94.425758 84.762092) (xy 94.425758 84.762091) (xy 94.425763 84.762089) + (xy 94.509639 84.678213) (xy 94.532659 84.638342) (xy 94.568947 84.57549) (xy 94.568947 84.575488) + (xy 94.568949 84.575486) (xy 94.59965 84.460909) (xy 94.59965 84.342291) (xy 94.568949 84.227714) + (xy 94.568947 84.227711) (xy 94.568947 84.227709) (xy 94.509642 84.124991) (xy 94.50964 84.124989) + (xy 94.509639 84.124987) (xy 94.425763 84.041111) (xy 94.42576 84.041109) (xy 94.425758 84.041107) + (xy 94.323039 83.981802) (xy 94.32304 83.981802) (xy 94.208453 83.951098) (xy 94.206321 83.950818) + (xy 94.204932 83.950155) (xy 94.202191 83.949421) (xy 94.202327 83.948912) (xy 94.151098 83.924471) + (xy 94.121909 83.870697) (xy 94.129364 83.814112) (xy 94.129245 83.814075) (xy 94.129462 83.81337) + (xy 94.129902 83.810036) (xy 94.130257 83.809299) (xy 94.131516 83.806725) (xy 94.14215 83.733736) + (xy 94.14215 82.912464) (xy 94.131516 82.839475) (xy 94.076476 82.726889) (xy 93.987861 82.638274) + (xy 93.969328 82.629214) (xy 93.875275 82.583234) (xy 93.875276 82.583234) (xy 93.857027 82.580575) + (xy 93.802286 82.5726) (xy 93.281014 82.5726) (xy 93.23722 82.57898) (xy 93.208023 82.583234) (xy 93.09544 82.638273) + (xy 93.006823 82.72689) (xy 92.951784 82.839473) (xy 92.951784 82.839475) (xy 92.94115 82.912464) + (xy 80.804467 82.912464) (xy 80.796038 74.573101) (xy 99.641651 74.573101) (xy 99.641651 74.654682) (xy 99.648058 74.725203) (xy 99.64806 74.725209) (xy 99.698629 74.887492) (xy 99.698632 74.8875) (xy 99.786574 75.032972) (xy 99.906777 75.153175) (xy 100.052249 75.241117) (xy 100.052257 75.24112) - (xy 100.214539 75.291689) (xy 100.214546 75.291691) (xy 100.237529 75.293779) (xy 100.293771 75.317873) - (xy 100.325109 75.370424) (xy 100.319574 75.431358) (xy 100.298577 75.462377) (xy 98.320284 77.440671) - (xy 98.265767 77.468448) (xy 98.243696 77.468736) (xy 98.243696 77.4688) (xy 98.238883 77.4688) - (xy 98.237355 77.46882) (xy 98.23721 77.468801) (xy 98.237207 77.4688) (xy 98.079093 77.4688) (xy 97.926366 77.509723) - (xy 97.789434 77.58878) (xy 97.67763 77.700584) (xy 97.598573 77.837516) (xy 97.584719 77.889222) - (xy 97.55765 77.990244) (xy 97.55765 78.148356) (xy 97.558497 78.154789) (xy 97.556535 78.155047) - (xy 97.553812 78.207074) (xy 97.51531 78.254626) (xy 97.461386 78.2706) (xy 97.122394 78.2706) (xy 97.064203 78.251693) - (xy 97.052391 78.241604) (xy 97.001368 78.190582) (xy 97.001366 78.19058) (xy 96.864434 78.111523) - (xy 96.711707 78.0706) (xy 96.553593 78.0706) (xy 96.400866 78.111523) (xy 96.263934 78.19058) (xy 96.15213 78.302384) - (xy 96.073073 78.439316) (xy 96.03215 78.592043) (xy 96.03215 78.750157) (xy 96.073073 78.902884) - (xy 96.15213 79.039816) (xy 96.263934 79.15162) (xy 96.400866 79.230677) (xy 96.553593 79.2716) - (xy 96.553595 79.2716) (xy 96.711705 79.2716) (xy 96.711707 79.2716) (xy 96.864434 79.230677) (xy 97.001366 79.15162) - (xy 97.026879 79.126106) (xy 97.052391 79.100596) (xy 97.106908 79.072819) (xy 97.122394 79.0716) - (xy 97.789164 79.0716) (xy 97.847355 79.090507) (xy 97.883319 79.140007) (xy 97.883319 79.201193) - (xy 97.859168 79.240604) (xy 94.858164 82.241607) (xy 94.858161 82.241611) (xy 94.770559 82.372714) - (xy 94.770553 82.372725) (xy 94.710213 82.518401) (xy 94.710213 82.518403) (xy 94.67945 82.673055) - (xy 94.67945 83.844315) (xy 94.660543 83.902506) (xy 94.611043 83.93847) (xy 94.549857 83.93847) - (xy 94.52019 83.922863) (xy 94.51787 83.921083) (xy 94.517867 83.921081) (xy 94.517866 83.92108) - (xy 94.380934 83.842023) (xy 94.36552 83.837892) (xy 94.314208 83.804569) (xy 94.292282 83.747448) - (xy 94.292308 83.742203) (xy 94.29215 83.742203) (xy 94.29215 82.906957) (xy 94.292149 82.906951) - (xy 94.290474 82.893) (xy 94.282009 82.82251) (xy 94.235052 82.703435) (xy 94.229015 82.688127) - (xy 94.229014 82.688126) (xy 94.229014 82.688125) (xy 94.141728 82.573022) (xy 94.026625 82.485736) - (xy 94.026624 82.485735) (xy 94.026622 82.485734) (xy 93.892241 82.432741) (xy 93.807798 82.4226) - (xy 93.807794 82.4226) (xy 93.275506 82.4226) (xy 93.275501 82.4226) (xy 93.191058 82.432741) (xy 93.056677 82.485734) - (xy 92.941572 82.573022) (xy 92.854284 82.688127) (xy 92.801291 82.822508) (xy 92.79115 82.906951) - (xy 92.79115 83.739248) (xy 92.801291 83.823691) (xy 92.854284 83.958072) (xy 92.854285 83.958074) - (xy 92.854286 83.958075) (xy 92.941572 84.073178) (xy 93.056675 84.160464) (xy 93.056676 84.160464) - (xy 93.056677 84.160465) (xy 93.110551 84.18171) (xy 93.19106 84.213459) (xy 93.275506 84.2236) - (xy 93.36375 84.2236) (xy 93.371347 84.226068) (xy 93.379236 84.224819) (xy 93.399889 84.235342) - (xy 93.421941 84.242507) (xy 93.433753 84.252596) (xy 93.519653 84.338495) (xy 93.547431 84.393011) - (xy 93.54865 84.408499) (xy 93.54865 84.480657) (xy 93.589573 84.633384) (xy 93.66863 84.770316) - (xy 93.780434 84.88212) (xy 93.917366 84.961177) (xy 94.070093 85.0021) (xy 94.070095 85.0021) (xy 94.228206 85.0021) - (xy 94.228207 85.0021) (xy 94.230808 85.001403) (xy 94.232733 85.001503) (xy 94.234639 85.001253) - (xy 94.234685 85.001606) (xy 94.291909 85.004602) (xy 94.339461 85.043104) (xy 94.3553 85.102204) - (xy 94.333376 85.159327) (xy 94.326439 85.167032) (xy 91.681361 87.812111) (xy 91.569864 87.923607) - (xy 91.569861 87.923611) (xy 91.482259 88.054714) (xy 91.482253 88.054725) (xy 91.421913 88.200401) - (xy 91.421913 88.200403) (xy 91.39115 88.355055) (xy 91.39115 97.0236) (xy 91.372243 97.081791) - (xy 91.322743 97.117755) (xy 91.29215 97.1226) (xy 91.148543 97.1226) (xy 91.060084 97.133223) (xy 90.91931 97.188737) - (xy 90.919306 97.18874) (xy 90.798731 97.280175) (xy 90.798725 97.280181) (xy 90.70729 97.400756) - (xy 90.707287 97.40076) (xy 90.651773 97.541534) (xy 90.64115 97.629993) (xy 90.64115 99.016206) - (xy 90.651773 99.104665) (xy 90.707287 99.245439) (xy 90.707288 99.245441) (xy 90.707289 99.245442) - (xy 90.798728 99.366022) (xy 90.919308 99.457461) (xy 90.919309 99.457461) (xy 90.91931 99.457462) - (xy 90.989697 99.485219) (xy 91.060086 99.512977) (xy 91.148548 99.5236) (xy 91.14855 99.5236) (xy 93.23475 99.5236) - (xy 93.234752 99.5236) (xy 93.323214 99.512977) (xy 93.463992 99.457461) (xy 93.584572 99.366022) - (xy 93.676011 99.245442) (xy 93.731527 99.104664) (xy 93.74215 99.016202) (xy 93.74215 97.629998) - (xy 93.731527 97.541536) (xy 93.698004 97.456529) (xy 93.676012 97.40076) (xy 93.676011 97.400759) - (xy 93.676011 97.400758) (xy 93.584572 97.280178) (xy 93.463992 97.188739) (xy 93.463991 97.188738) - (xy 93.463989 97.188737) (xy 93.323215 97.133223) (xy 93.234756 97.1226) (xy 93.234752 97.1226) - (xy 93.09115 97.1226) (xy 93.032959 97.103693) (xy 92.996995 97.054193) (xy 92.99215 97.0236) (xy 92.99215 95.1952) - (xy 93.011057 95.137009) (xy 93.060557 95.101045) (xy 93.101731 95.096767) (xy 93.118777 95.0986) - (xy 93.614522 95.098599) (xy 93.674133 95.092191) (xy 93.755195 95.061957) (xy 93.808979 95.041897) - (xy 93.808979 95.041896) (xy 93.808981 95.041896) (xy 93.924196 94.955646) (xy 94.010446 94.840431) - (xy 94.017661 94.821088) (xy 94.051041 94.731591) (xy 94.060741 94.705583) (xy 94.06715 94.645973) - (xy 94.067149 94.000228) (xy 94.060741 93.940617) (xy 94.054021 93.9226) (xy 94.010447 93.80577) - (xy 93.925143 93.691819) (xy 93.905406 93.633904) (xy 93.918662 93.582986) (xy 93.926227 93.569884) - (xy 93.96715 93.417157) (xy 93.96715 93.259043) (xy 93.926227 93.106316) (xy 93.84717 92.969384) - (xy 93.735366 92.85758) (xy 93.598434 92.778523) (xy 93.445707 92.7376) (xy 93.287593 92.7376) (xy 93.216908 92.75654) - (xy 93.13486 92.778524) (xy 93.129035 92.780938) (xy 93.068038 92.785738) (xy 93.015869 92.753769) - (xy 92.992455 92.697241) (xy 92.99215 92.689474) (xy 92.99215 88.806486) (xy 93.011057 88.748295) - (xy 93.021146 88.736482) (xy 94.543891 87.213737) (xy 96.101738 85.65589) (xy 96.101859 85.655708) - (xy 96.119358 85.629521) (xy 96.119358 85.62952) (xy 96.18934 85.524786) (xy 96.189346 85.524774) - (xy 96.222412 85.444944) (xy 96.249687 85.379097) (xy 96.28045 85.224442) (xy 96.28045 84.275865) - (xy 96.299357 84.217674) (xy 96.348857 84.18171) (xy 96.410043 84.18171) (xy 96.415769 84.183768) - (xy 96.448219 84.196564) (xy 96.49106 84.213459) (xy 96.575506 84.2236) (xy 96.575508 84.2236) (xy 97.107792 84.2236) - (xy 97.107794 84.2236) (xy 97.19224 84.213459) (xy 97.326625 84.160464) (xy 97.441728 84.073178) - (xy 97.529014 83.958075) (xy 97.582009 83.82369) (xy 97.59215 83.739244) (xy 97.59215 83.643711) - (xy 97.611057 83.58552) (xy 97.641647 83.557976) (xy 97.692563 83.52858) (xy 97.763699 83.457444) - (xy 97.788548 83.432596) (xy 97.794245 83.429693) (xy 97.797837 83.424403) (xy 97.81857 83.417298) - (xy 97.843064 83.404819) (xy 97.855395 83.40365) (xy 97.856963 83.4036) (xy 97.930707 83.4036) (xy 97.94067 83.40093) - (xy 97.952094 83.400566) (xy 97.971035 83.406059) (xy 97.990726 83.407091) (xy 97.999729 83.414381) - (xy 98.010858 83.417609) (xy 98.022952 83.433186) (xy 98.038277 83.445595) (xy 98.041787 83.457444) - (xy 98.048382 83.465938) (xy 98.048874 83.481367) (xy 98.05425 83.499516) (xy 98.05425 87.233648) - (xy 98.035343 87.291839) (xy 98.025259 87.303646) (xy 98.02373 87.305174) (xy 97.93229 87.425756) - (xy 97.932287 87.42576) (xy 97.876773 87.566534) (xy 97.86615 87.654993) (xy 97.86615 87.693789) - (xy 97.849465 87.748791) (xy 97.798212 87.825494) (xy 97.798208 87.825503) (xy 97.719019 88.016681) - (xy 97.67865 88.219632) (xy 97.67865 88.426567) (xy 97.719019 88.629518) (xy 97.798208 88.820697) - (xy 97.810221 88.838675) (xy 97.837155 88.878985) (xy 97.849465 88.897407) (xy 97.86615 88.952409) - (xy 97.86615 88.991206) (xy 97.876773 89.079665) (xy 97.932287 89.220439) (xy 97.932288 89.22044) - (xy 97.932289 89.220442) (xy 98.023728 89.341022) (xy 98.144308 89.432461) (xy 98.144309 89.432461) - (xy 98.14431 89.432462) (xy 98.198148 89.453693) (xy 98.285086 89.487977) (xy 98.373548 89.4986) - (xy 98.378011 89.4986) (xy 98.436202 89.517507) (xy 98.448015 89.527596) (xy 100.305654 91.385235) - (xy 100.333431 91.439752) (xy 100.33465 91.455239) (xy 100.33465 93.2491) (xy 100.329805 93.264011) - (xy 100.329805 93.279693) (xy 100.320588 93.292378) (xy 100.315743 93.307291) (xy 100.303057 93.316507) - (xy 100.293841 93.329193) (xy 100.278928 93.334038) (xy 100.266243 93.343255) (xy 100.23565 93.3481) - (xy 100.176871 93.3481) (xy 100.11868 93.329193) (xy 100.082716 93.279693) (xy 100.08125 93.274743) - (xy 100.040327 93.122016) (xy 99.96127 92.985084) (xy 99.849466 92.87328) (xy 99.712534 92.794223) - (xy 99.559807 92.7533) (xy 99.401693 92.7533) (xy 99.248966 92.794223) (xy 99.112034 92.87328) (xy 99.00023 92.985084) - (xy 98.924312 93.11658) (xy 98.921172 93.122018) (xy 98.898693 93.205905) (xy 98.873071 93.250284) - (xy 98.604751 93.518604) (xy 98.550234 93.546381) (xy 98.534747 93.5476) (xy 98.118783 93.5476) - (xy 98.118779 93.5476) (xy 98.118778 93.547601) (xy 98.111599 93.548372) (xy 98.059169 93.554008) - (xy 98.059164 93.554009) (xy 97.92432 93.604302) (xy 97.809108 93.69055) (xy 97.8091 93.690558) - (xy 97.722854 93.805767) (xy 97.714545 93.828047) (xy 97.703299 93.858198) (xy 97.66525 93.906111) - (xy 97.610542 93.9226) (xy 95.772758 93.9226) (xy 95.714567 93.903693) (xy 95.68 93.858198) (xy 95.660446 93.805769) - (xy 95.656804 93.800904) (xy 95.574199 93.690558) (xy 95.574198 93.690557) (xy 95.574196 93.690554) - (xy 95.570221 93.687578) (xy 95.458979 93.604302) (xy 95.324138 93.55401) (xy 95.324133 93.554009) - (xy 95.324131 93.554008) (xy 95.324127 93.554008) (xy 95.292899 93.55065) (xy 95.264523 93.5476) - (xy 95.26452 93.5476) (xy 94.768783 93.5476) (xy 94.768779 93.5476) (xy 94.768778 93.547601) (xy 94.761599 93.548372) - (xy 94.709169 93.554008) (xy 94.709164 93.554009) (xy 94.57432 93.604302) (xy 94.459108 93.69055) - (xy 94.4591 93.690558) (xy 94.372852 93.80577) (xy 94.32256 93.940611) (xy 94.322558 93.940622) - (xy 94.31615 94.000229) (xy 94.31615 94.645966) (xy 94.316151 94.64597) (xy 94.322558 94.70558) - (xy 94.322559 94.705585) (xy 94.372852 94.840429) (xy 94.445925 94.938041) (xy 94.459104 94.955646) - (xy 94.459107 94.955648) (xy 94.459108 94.955649) (xy 94.57432 95.041897) (xy 94.709161 95.092189) - (xy 94.709162 95.092189) (xy 94.709167 95.092191) (xy 94.768777 95.0986) (xy 95.264522 95.098599) - (xy 95.324133 95.092191) (xy 95.405195 95.061957) (xy 95.458979 95.041897) (xy 95.458979 95.041896) - (xy 95.458981 95.041896) (xy 95.574196 94.955646) (xy 95.660446 94.840431) (xy 95.68 94.788001) - (xy 95.71805 94.740089) (xy 95.772758 94.7236) (xy 97.610542 94.7236) (xy 97.668733 94.742507) (xy 97.703299 94.788001) - (xy 97.715314 94.820214) (xy 97.722854 94.840432) (xy 97.795925 94.938041) (xy 97.809104 94.955646) - (xy 97.809107 94.955648) (xy 97.809108 94.955649) (xy 97.92432 95.041897) (xy 98.059161 95.092189) - (xy 98.059162 95.092189) (xy 98.059167 95.092191) (xy 98.118777 95.0986) (xy 98.614522 95.098599) - (xy 98.674133 95.092191) (xy 98.755195 95.061957) (xy 98.808979 95.041897) (xy 98.808979 95.041896) - (xy 98.808981 95.041896) (xy 98.924196 94.955646) (xy 98.99919 94.855466) (xy 99.049197 94.820214) - (xy 99.110376 94.821088) (xy 99.159357 94.857755) (xy 99.172957 94.885336) (xy 99.173628 94.88749) - (xy 99.173632 94.8875) (xy 99.261574 95.032972) (xy 99.381777 95.153175) (xy 99.527249 95.241117) - (xy 99.527253 95.241118) (xy 99.544309 95.246433) (xy 99.59424 95.281795) (xy 99.613851 95.339752) - (xy 99.595649 95.398168) (xy 99.584862 95.410954) (xy 98.874475 96.121343) (xy 98.759508 96.293402) - (xy 98.680319 96.484581) (xy 98.63995 96.687532) (xy 98.63995 96.894467) (xy 98.680319 97.097418) - (xy 98.744342 97.251982) (xy 98.749143 97.312979) (xy 98.717173 97.365148) (xy 98.712698 97.368751) - (xy 98.598732 97.455174) (xy 98.598725 97.455181) (xy 98.50729 97.575756) (xy 98.507287 97.57576) - (xy 98.451773 97.716534) (xy 98.44115 97.804993) (xy 98.44115 97.804998) (xy 98.44115 98.239644) - (xy 98.44025 98.244169) (xy 98.44025 98.402031) (xy 98.44115 98.406555) (xy 98.44115 98.841206) - (xy 98.451773 98.929665) (xy 98.507287 99.070439) (xy 98.507288 99.070441) (xy 98.507289 99.070442) - (xy 98.598728 99.191022) (xy 98.625509 99.211331) (xy 98.659776 99.237316) (xy 98.694719 99.287543) - (xy 98.693465 99.348715) (xy 98.656495 99.397468) (xy 98.599957 99.4152) (xy 98.456836 99.4152) - (xy 98.398645 99.396293) (xy 98.386832 99.386204) (xy 97.771146 98.770518) (xy 97.743369 98.716001) - (xy 97.74215 98.700514) (xy 97.74215 97.629999) (xy 97.742149 97.629993) (xy 97.731527 97.541536) - (xy 97.698004 97.456529) (xy 97.676012 97.40076) (xy 97.676011 97.400759) (xy 97.676011 97.400758) - (xy 97.584572 97.280178) (xy 97.463992 97.188739) (xy 97.463991 97.188738) (xy 97.463989 97.188737) - (xy 97.323215 97.133223) (xy 97.234756 97.1226) (xy 97.234752 97.1226) (xy 95.148548 97.1226) (xy 95.148543 97.1226) - (xy 95.060084 97.133223) (xy 94.91931 97.188737) (xy 94.919306 97.18874) (xy 94.798731 97.280175) - (xy 94.798725 97.280181) (xy 94.70729 97.400756) (xy 94.707287 97.40076) (xy 94.651773 97.541534) - (xy 94.64115 97.629993) (xy 94.64115 99.016206) (xy 94.651773 99.104665) (xy 94.707287 99.245439) - (xy 94.707288 99.245441) (xy 94.707289 99.245442) (xy 94.798728 99.366022) (xy 94.919308 99.457461) - (xy 94.919309 99.457461) (xy 94.91931 99.457462) (xy 94.989697 99.485219) (xy 95.060086 99.512977) - (xy 95.148548 99.5236) (xy 96.219064 99.5236) (xy 96.277255 99.542507) (xy 96.289068 99.552596) - (xy 97.573961 100.837489) (xy 97.6387 100.880746) (xy 97.705064 100.92509) (xy 97.705075 100.925096) - (xy 97.737747 100.938629) (xy 97.784273 100.978365) (xy 97.798557 101.03786) (xy 97.795489 101.055715) - (xy 97.777809 101.1217) (xy 97.77335 101.138343) (xy 97.77335 101.296457) (xy 97.802455 101.405079) - (xy 97.807251 101.422977) (xy 97.804048 101.484079) (xy 97.765543 101.531629) (xy 97.711624 101.5476) - (xy 97.443783 101.5476) (xy 97.443779 101.5476) (xy 97.443778 101.547601) (xy 97.436599 101.548372) - (xy 97.384169 101.554008) (xy 97.384164 101.554009) (xy 97.24932 101.604302) (xy 97.134108 101.69055) - (xy 97.1341 101.690558) (xy 97.047852 101.80577) (xy 96.99756 101.940611) (xy 96.997558 101.940622) - (xy 96.995211 101.962455) (xy 96.992087 101.991517) (xy 96.99115 102.000229) (xy 96.99115 102.467199) - (xy 96.983986 102.489246) (xy 96.98036 102.512144) (xy 96.974711 102.517792) (xy 96.972243 102.52539) - (xy 96.953486 102.539017) (xy 96.937095 102.555409) (xy 96.929205 102.556658) (xy 96.922743 102.561354) - (xy 96.899558 102.561354) (xy 96.876663 102.56498) (xy 96.869546 102.561354) (xy 96.861557 102.561354) - (xy 96.822146 102.537203) (xy 96.771145 102.486202) (xy 96.743368 102.431685) (xy 96.742149 102.416198) - (xy 96.742149 102.000233) (xy 96.742149 102.000228) (xy 96.735741 101.940617) (xy 96.730696 101.92709) - (xy 96.685447 101.80577) (xy 96.599199 101.690558) (xy 96.599198 101.690557) (xy 96.599196 101.690554) - (xy 96.599191 101.69055) (xy 96.483979 101.604302) (xy 96.349138 101.55401) (xy 96.349133 101.554009) - (xy 96.349131 101.554008) (xy 96.349127 101.554008) (xy 96.317899 101.55065) (xy 96.289523 101.5476) - (xy 96.28952 101.5476) (xy 95.793783 101.5476) (xy 95.793779 101.5476) (xy 95.793778 101.547601) - (xy 95.786599 101.548372) (xy 95.734169 101.554008) (xy 95.734164 101.554009) (xy 95.59932 101.604302) - (xy 95.484108 101.69055) (xy 95.4841 101.690558) (xy 95.397852 101.80577) (xy 95.34756 101.940611) - (xy 95.347558 101.940622) (xy 95.345211 101.962455) (xy 95.342087 101.991517) (xy 95.34115 102.000229) - (xy 95.34115 102.645966) (xy 95.341151 102.64597) (xy 95.347558 102.70558) (xy 95.347559 102.705585) - (xy 95.397852 102.840429) (xy 95.459855 102.923254) (xy 95.484104 102.955646) (xy 95.484107 102.955648) - (xy 95.484108 102.955649) (xy 95.59932 103.041897) (xy 95.734161 103.092189) (xy 95.734162 103.092189) - (xy 95.734167 103.092191) (xy 95.793777 103.0986) (xy 96.209748 103.098599) (xy 96.267939 103.117506) - (xy 96.279752 103.127595) (xy 96.923337 103.77118) (xy 96.923339 103.771181) (xy 96.92334 103.771182) - (xy 96.923341 103.771183) (xy 97.014658 103.823905) (xy 97.014656 103.823905) (xy 97.01466 103.823906) - (xy 97.014662 103.823907) (xy 97.116523 103.8512) (xy 97.221977 103.8512) (xy 98.983706 103.8512) - (xy 99.041897 103.870107) (xy 99.053709 103.880196) (xy 99.094895 103.921381) (xy 99.104734 103.93122) - (xy 99.241666 104.010277) (xy 99.394393 104.0512) (xy 99.394395 104.0512) (xy 99.508149 104.0512) - (xy 99.56634 104.070107) (xy 99.602304 104.119607) (xy 99.602304 104.180793) (xy 99.578153 104.220204) - (xy 97.279751 106.518604) (xy 97.225234 106.546381) (xy 97.209747 106.5476) (xy 96.793783 106.5476) - (xy 96.793779 106.5476) (xy 96.793778 106.547601) (xy 96.786599 106.548372) (xy 96.734169 106.554008) - (xy 96.734164 106.554009) (xy 96.59932 106.604302) (xy 96.484108 106.69055) (xy 96.4841 106.690558) - (xy 96.397852 106.80577) (xy 96.34756 106.940611) (xy 96.347559 106.940621) (xy 96.342087 106.991517) - (xy 96.34115 107.000229) (xy 96.34115 107.645966) (xy 96.341151 107.64597) (xy 96.347558 107.70558) - (xy 96.347559 107.705585) (xy 96.397852 107.840429) (xy 96.479341 107.949284) (xy 96.484104 107.955646) - (xy 96.484107 107.955648) (xy 96.484108 107.955649) (xy 96.59932 108.041897) (xy 96.734161 108.092189) - (xy 96.734162 108.092189) (xy 96.734167 108.092191) (xy 96.793777 108.0986) (xy 97.289522 108.098599) - (xy 97.349133 108.092191) (xy 97.474423 108.045461) (xy 97.483979 108.041897) (xy 97.483979 108.041896) - (xy 97.483981 108.041896) (xy 97.599196 107.955646) (xy 97.685446 107.840431) (xy 97.692661 107.821088) - (xy 97.735739 107.705588) (xy 97.73574 107.705585) (xy 97.735741 107.705583) (xy 97.74215 107.645973) - (xy 97.742149 107.229999) (xy 97.744617 107.222402) (xy 97.743368 107.214513) (xy 97.753892 107.193857) - (xy 97.761056 107.171809) (xy 97.771139 107.160002) (xy 97.822148 107.108993) (xy 97.876663 107.081218) - (xy 97.937095 107.090789) (xy 97.98036 107.134054) (xy 97.99115 107.178999) (xy 97.99115 107.645966) - (xy 97.991151 107.64597) (xy 97.997558 107.70558) (xy 97.997559 107.705585) (xy 98.047852 107.840429) - (xy 98.129341 107.949284) (xy 98.134104 107.955646) (xy 98.134107 107.955648) (xy 98.134108 107.955649) - (xy 98.24932 108.041897) (xy 98.384161 108.092189) (xy 98.384162 108.092189) (xy 98.384167 108.092191) - (xy 98.443777 108.0986) (xy 98.939522 108.098599) (xy 98.999133 108.092191) (xy 99.124423 108.045461) - (xy 99.133979 108.041897) (xy 99.133979 108.041896) (xy 99.133981 108.041896) (xy 99.249196 107.955646) - (xy 99.275325 107.920741) (xy 99.325333 107.885489) (xy 99.386512 107.886363) (xy 99.414922 107.904052) - (xy 99.415984 107.902669) (xy 99.421126 107.906614) (xy 99.42113 107.906616) (xy 99.421134 107.90662) - (xy 99.558066 107.985677) (xy 99.710793 108.0266) (xy 99.710795 108.0266) (xy 99.868905 108.0266) - (xy 99.868907 108.0266) (xy 100.021634 107.985677) (xy 100.08516 107.949) (xy 100.145006 107.936279) - (xy 100.200901 107.961165) (xy 100.216974 107.979736) (xy 100.220943 107.985677) (xy 100.225673 107.992755) - (xy 100.371995 108.139077) (xy 100.544052 108.254041) (xy 100.73523 108.33323) (xy 100.754462 108.337055) - (xy 100.805151 108.364149) (xy 100.859962 108.418959) (xy 100.859963 108.418959) (xy 101.02918 108.588176) - (xy 101.056957 108.642693) (xy 101.056274 108.677492) (xy 101.04115 108.753528) (xy 101.04115 112.426567) - (xy 101.081519 112.629518) (xy 101.160708 112.820697) (xy 101.187303 112.860499) (xy 101.203911 112.919387) - (xy 101.182733 112.976791) (xy 101.131859 113.010783) (xy 101.104987 113.0145) (xy 100.504638 113.0145) - (xy 100.446447 112.995593) (xy 100.410483 112.946093) (xy 100.410121 112.886047) (xy 100.460239 112.72521) + (xy 100.214539 75.291689) (xy 100.214545 75.291691) (xy 100.285075 75.298098) (xy 100.29165 75.298098) + (xy 100.29165 74.573101) (xy 100.291649 74.5731) (xy 99.641652 74.5731) (xy 99.641651 74.573101) + (xy 80.796038 74.573101) (xy 80.795513 74.053991) (xy 97.63215 74.053991) (xy 97.63215 74.172609) + (xy 97.655856 74.261081) (xy 97.662852 74.28719) (xy 97.722157 74.389908) (xy 97.722159 74.38991) + (xy 97.722161 74.389913) (xy 97.806037 74.473789) (xy 97.806039 74.47379) (xy 97.806041 74.473792) + (xy 97.90876 74.533097) (xy 97.908761 74.533097) (xy 97.908764 74.533099) (xy 98.023341 74.5638) + (xy 98.023343 74.5638) (xy 98.141957 74.5638) (xy 98.141959 74.5638) (xy 98.256536 74.533099) (xy 98.256538 74.533097) + (xy 98.25654 74.533097) (xy 98.359258 74.473792) (xy 98.359258 74.473791) (xy 98.359263 74.473789) + (xy 98.443139 74.389913) (xy 98.486818 74.31426) (xy 98.502447 74.28719) (xy 98.502447 74.287188) + (xy 98.502449 74.287186) (xy 98.53315 74.172609) (xy 98.53315 74.053991) (xy 98.51641 73.991518) + (xy 99.64165 73.991518) (xy 99.64165 74.073099) (xy 99.641651 74.0731) (xy 100.291649 74.0731) (xy 100.29165 74.073099) + (xy 100.29165 73.348101) (xy 100.291648 73.348099) (xy 100.285075 73.3481) (xy 100.214546 73.354508) + (xy 100.21454 73.35451) (xy 100.052257 73.405079) (xy 100.052249 73.405082) (xy 99.906777 73.493024) + (xy 99.786574 73.613227) (xy 99.698632 73.758699) (xy 99.698629 73.758707) (xy 99.64806 73.920989) + (xy 99.648058 73.920995) (xy 99.64165 73.991518) (xy 98.51641 73.991518) (xy 98.502449 73.939414) + (xy 98.502447 73.939411) (xy 98.502447 73.939409) (xy 98.443142 73.836691) (xy 98.44314 73.836689) + (xy 98.443139 73.836687) (xy 98.359263 73.752811) (xy 98.35926 73.752809) (xy 98.359258 73.752807) + (xy 98.256539 73.693502) (xy 98.25654 73.693502) (xy 98.243001 73.689874) (xy 98.141959 73.6628) + (xy 98.023341 73.6628) (xy 97.953217 73.681589) (xy 97.908759 73.693502) (xy 97.806041 73.752807) + (xy 97.722157 73.836691) (xy 97.662852 73.939409) (xy 97.660897 73.946707) (xy 97.63215 74.053991) + (xy 80.795513 74.053991) (xy 80.779716 58.426531) (xy 82.61365 58.426531) (xy 82.61365 62.042269) + (xy 82.633776 62.143444) (xy 82.638649 62.167944) (xy 82.63865 62.167947) (xy 82.638651 62.16795) + (xy 82.687683 62.286324) (xy 82.758207 62.391873) (xy 82.758873 62.392869) (xy 84.596681 64.230677) + (xy 84.660333 64.273207) (xy 84.703223 64.301865) (xy 84.821606 64.350901) (xy 84.947281 64.3759) + (xy 86.24215 64.3759) (xy 86.300341 64.394807) (xy 86.336305 64.444307) (xy 86.34115 64.4749) (xy 86.34115 70.7736) + (xy 86.322243 70.831791) (xy 86.272743 70.867755) (xy 86.24215 70.8726) (xy 85.460128 70.8726) (xy 85.460126 70.872601) + (xy 85.36635 70.887452) (xy 85.366345 70.887454) (xy 85.253309 70.945049) (xy 85.163599 71.034759) + (xy 85.106004 71.147795) (xy 85.09115 71.241578) (xy 85.09115 72.404621) (xy 85.091151 72.404623) + (xy 85.106002 72.498399) (xy 85.106004 72.498404) (xy 85.1636 72.611442) (xy 85.253308 72.70115) + (xy 85.366346 72.758746) (xy 85.460131 72.7736) (xy 88.523168 72.773599) (xy 88.523171 72.773599) + (xy 88.523172 72.773598) (xy 88.570061 72.766172) (xy 88.616949 72.758747) (xy 88.616949 72.758746) + (xy 88.616954 72.758746) (xy 88.729992 72.70115) (xy 88.8197 72.611442) (xy 88.877296 72.498404) + (xy 88.889225 72.423086) (xy 88.89215 72.404621) (xy 88.89215 72.073101) (xy 90.141651 72.073101) + (xy 90.141651 72.423086) (xy 90.152142 72.525787) (xy 90.152145 72.525799) (xy 90.207293 72.692224) + (xy 90.29933 72.84144) (xy 90.423309 72.965419) (xy 90.572525 73.057456) (xy 90.738956 73.112606) + (xy 90.841662 73.123099) (xy 92.141648 73.123099) (xy 92.14165 73.123098) (xy 92.14165 72.073101) + (xy 92.64165 72.073101) (xy 92.64165 73.123098) (xy 92.641651 73.123099) (xy 93.941636 73.123099) + (xy 94.044337 73.112607) (xy 94.044349 73.112604) (xy 94.210774 73.057456) (xy 94.35999 72.965419) + (xy 94.483969 72.84144) (xy 94.576006 72.692224) (xy 94.631156 72.525793) (xy 94.64165 72.423087) + (xy 94.64165 72.107291) (xy 96.03055 72.107291) (xy 96.03055 72.225909) (xy 96.031592 72.229796) + (xy 96.061252 72.34049) (xy 96.120557 72.443208) (xy 96.120559 72.44321) (xy 96.120561 72.443213) + (xy 96.204437 72.527089) (xy 96.204439 72.52709) (xy 96.204441 72.527092) (xy 96.30716 72.586397) + (xy 96.307161 72.586397) (xy 96.307164 72.586399) (xy 96.421741 72.6171) (xy 96.421743 72.6171) + (xy 96.540357 72.6171) (xy 96.540359 72.6171) (xy 96.654936 72.586399) (xy 96.654938 72.586397) + (xy 96.65494 72.586397) (xy 96.757658 72.527092) (xy 96.757658 72.527091) (xy 96.757663 72.527089) + (xy 96.841539 72.443213) (xy 96.853159 72.423087) (xy 96.900847 72.34049) (xy 96.900847 72.340488) + (xy 96.900849 72.340486) (xy 96.93155 72.225909) (xy 96.93155 72.107291) (xy 96.900849 71.992714) + (xy 96.900847 71.992711) (xy 96.900847 71.992709) (xy 96.841542 71.889991) (xy 96.84154 71.889989) + (xy 96.841539 71.889987) (xy 96.757663 71.806111) (xy 96.75766 71.806109) (xy 96.757658 71.806107) + (xy 96.654939 71.746802) (xy 96.65494 71.746802) (xy 96.633514 71.741061) (xy 96.540359 71.7161) + (xy 96.421741 71.7161) (xy 96.351617 71.734889) (xy 96.307159 71.746802) (xy 96.204441 71.806107) + (xy 96.120557 71.889991) (xy 96.061252 71.992709) (xy 96.061251 71.992714) (xy 96.03055 72.107291) + (xy 94.64165 72.107291) (xy 94.64165 72.073101) (xy 94.641649 72.0731) (xy 92.641651 72.0731) (xy 92.64165 72.073101) + (xy 92.14165 72.073101) (xy 92.141649 72.0731) (xy 90.141652 72.0731) (xy 90.141651 72.073101) (xy 88.89215 72.073101) + (xy 88.89215 72.032093) (xy 88.892149 71.241582) (xy 88.891279 71.23609) (xy 88.891279 71.236086) + (xy 88.889224 71.223112) (xy 90.14165 71.223112) (xy 90.14165 71.573099) (xy 90.141651 71.5731) + (xy 92.141649 71.5731) (xy 92.14165 71.573099) (xy 92.14165 70.523101) (xy 92.64165 70.523101) (xy 92.64165 71.573099) + (xy 92.641651 71.5731) (xy 94.641648 71.5731) (xy 94.641649 71.573099) (xy 94.641649 71.223113) + (xy 94.631157 71.120412) (xy 94.631154 71.1204) (xy 94.576006 70.953975) (xy 94.524767 70.870902) + (xy 94.510311 70.811449) (xy 94.533561 70.754853) (xy 94.539013 70.748938) (xy 94.598739 70.689213) + (xy 94.599051 70.688672) (xy 94.658047 70.58649) (xy 94.658047 70.586488) (xy 94.658049 70.586486) + (xy 94.68875 70.471909) (xy 94.68875 70.353291) (xy 94.658049 70.238714) (xy 94.658047 70.238711) + (xy 94.658047 70.238709) (xy 94.598742 70.135991) (xy 94.59874 70.135989) (xy 94.598739 70.135987) + (xy 94.514863 70.052111) (xy 94.51486 70.052109) (xy 94.514858 70.052107) (xy 94.412139 69.992802) + (xy 94.41214 69.992802) (xy 94.382119 69.984758) (xy 94.297559 69.9621) (xy 94.178941 69.9621) (xy 94.108817 69.980889) + (xy 94.064359 69.992802) (xy 93.961641 70.052107) (xy 93.877757 70.135991) (xy 93.818452 70.238709) + (xy 93.78775 70.353292) (xy 93.78775 70.4241) (xy 93.768843 70.482291) (xy 93.719343 70.518255) + (xy 93.68875 70.5231) (xy 92.641651 70.5231) (xy 92.64165 70.523101) (xy 92.14165 70.523101) (xy 92.141649 70.5231) + (xy 90.841663 70.5231) (xy 90.738962 70.533592) (xy 90.73895 70.533595) (xy 90.572525 70.588743) + (xy 90.423309 70.68078) (xy 90.29933 70.804759) (xy 90.207293 70.953975) (xy 90.152143 71.120406) + (xy 90.14165 71.223112) (xy 88.889224 71.223112) (xy 88.877297 71.1478) (xy 88.877296 71.147798) + (xy 88.877296 71.147796) (xy 88.8197 71.034758) (xy 88.729992 70.94505) (xy 88.616954 70.887454) + (xy 88.616955 70.887454) (xy 88.523172 70.8726) (xy 88.523169 70.8726) (xy 87.74115 70.8726) (xy 87.682959 70.853693) + (xy 87.646995 70.804193) (xy 87.64215 70.7736) (xy 87.64215 69.240691) (xy 93.3995 69.240691) (xy 93.3995 69.359309) + (xy 93.406965 69.387169) (xy 93.430202 69.47389) (xy 93.489507 69.576608) (xy 93.489509 69.57661) + (xy 93.489511 69.576613) (xy 93.573387 69.660489) (xy 93.573389 69.66049) (xy 93.573391 69.660492) + (xy 93.67611 69.719797) (xy 93.676111 69.719797) (xy 93.676114 69.719799) (xy 93.790691 69.7505) + (xy 93.790693 69.7505) (xy 93.909307 69.7505) (xy 93.909309 69.7505) (xy 94.023886 69.719799) (xy 94.023888 69.719797) + (xy 94.02389 69.719797) (xy 94.126608 69.660492) (xy 94.126608 69.660491) (xy 94.126613 69.660489) + (xy 94.210489 69.576613) (xy 94.212518 69.573099) (xy 94.269797 69.47389) (xy 94.269797 69.473888) + (xy 94.269799 69.473886) (xy 94.3005 69.359309) (xy 94.3005 69.240691) (xy 94.269799 69.126114) + (xy 94.269797 69.126111) (xy 94.269797 69.126109) (xy 94.210492 69.023391) (xy 94.21049 69.023389) + (xy 94.210489 69.023387) (xy 94.126613 68.939511) (xy 94.12661 68.939509) (xy 94.126608 68.939507) + (xy 94.023889 68.880202) (xy 94.02389 68.880202) (xy 93.997336 68.873087) (xy 93.909309 68.8495) + (xy 93.790691 68.8495) (xy 93.720567 68.868289) (xy 93.676109 68.880202) (xy 93.573391 68.939507) + (xy 93.489507 69.023391) (xy 93.430202 69.126109) (xy 93.425884 69.142224) (xy 93.3995 69.240691) + (xy 87.64215 69.240691) (xy 87.64215 67.641591) (xy 91.74805 67.641591) (xy 91.74805 67.760209) + (xy 91.775124 67.861251) (xy 91.778752 67.87479) (xy 91.838057 67.977508) (xy 91.838059 67.97751) + (xy 91.838061 67.977513) (xy 91.921937 68.061389) (xy 91.921939 68.06139) (xy 91.921941 68.061392) + (xy 92.02466 68.120697) (xy 92.024661 68.120697) (xy 92.024664 68.120699) (xy 92.139241 68.1514) + (xy 92.139243 68.1514) (xy 92.257857 68.1514) (xy 92.257859 68.1514) (xy 92.372436 68.120699) (xy 92.372438 68.120697) + (xy 92.37244 68.120697) (xy 92.475158 68.061392) (xy 92.475158 68.061391) (xy 92.475163 68.061389) + (xy 92.559039 67.977513) (xy 92.570578 67.957527) (xy 92.618347 67.87479) (xy 92.618347 67.874788) + (xy 92.618349 67.874786) (xy 92.64905 67.760209) (xy 92.64905 67.641591) (xy 92.618349 67.527014) + (xy 92.618347 67.527011) (xy 92.618347 67.527009) (xy 92.559042 67.424291) (xy 92.55904 67.424289) + (xy 92.559039 67.424287) (xy 92.475163 67.340411) (xy 92.47516 67.340409) (xy 92.475158 67.340407) + (xy 92.372439 67.281102) (xy 92.37244 67.281102) (xy 92.358901 67.277474) (xy 92.257859 67.2504) + (xy 92.139241 67.2504) (xy 92.069117 67.269189) (xy 92.024659 67.281102) (xy 91.921941 67.340407) + (xy 91.838057 67.424291) (xy 91.778752 67.527009) (xy 91.772726 67.549499) (xy 91.74805 67.641591) + (xy 87.64215 67.641591) (xy 87.64215 64.4749) (xy 87.661057 64.416709) (xy 87.710557 64.380745) + (xy 87.74115 64.3759) (xy 98.920918 64.3759) (xy 98.920919 64.3759) (xy 99.046594 64.350901) (xy 99.164977 64.301865) + (xy 99.207867 64.273207) (xy 99.271519 64.230677) (xy 100.059146 63.443048) (xy 100.113663 63.415272) + (xy 100.174095 63.424843) (xy 100.199154 63.443049) (xy 103.770774 67.014669) (xy 103.861381 67.105276) + (xy 103.924898 67.147717) (xy 103.967916 67.176461) (xy 103.96792 67.176463) (xy 103.967923 67.176465) + (xy 104.086306 67.225501) (xy 104.211981 67.2505) (xy 120.138232 67.2505) (xy 120.196423 67.269407) + (xy 120.232387 67.318907) (xy 120.232387 67.380093) (xy 120.206204 67.421477) (xy 120.192952 67.433991) + (xy 120.184153 67.437636) (xy 120.100313 67.521475) (xy 120.099253 67.522477) (xy 120.072826 67.535003) + (xy 120.046767 67.548281) (xy 120.044426 67.548465) (xy 120.043965 67.548684) (xy 120.04328 67.548555) + (xy 120.031281 67.5495) (xy 102.126109 67.5495) (xy 102.126101 67.549499) (xy 102.114578 67.549499) + (xy 102.014923 67.549499) (xy 101.960989 67.571839) (xy 101.922853 67.587634) (xy 101.852385 67.658102) + (xy 101.852386 67.658103) (xy 101.852385 67.658104) (xy 100.841884 68.668604) (xy 100.787367 68.696381) + (xy 100.77188 68.6976) (xy 100.30839 68.6976) (xy 100.275247 68.702429) (xy 100.240254 68.707527) + (xy 100.135168 68.758901) (xy 100.052451 68.841618) (xy 100.001077 68.946704) (xy 99.999011 68.960885) + (xy 99.99115 69.01484) (xy 99.99115 69.63136) (xy 99.995163 69.658902) (xy 100.001077 69.699495) + (xy 100.052451 69.804581) (xy 100.052452 69.804583) (xy 100.135167 69.887298) (xy 100.219581 69.928565) + (xy 100.23563 69.936411) (xy 100.279604 69.978954) (xy 100.29115 70.025352) (xy 100.29115 72.910328) + (xy 100.329285 73.002396) (xy 100.329286 73.002397) (xy 100.762653 73.435764) (xy 100.790431 73.49028) + (xy 100.79165 73.505767) (xy 100.79165 75.14043) (xy 100.772743 75.198621) (xy 100.762654 75.210434) + (xy 98.365789 77.607298) (xy 98.311272 77.635075) (xy 98.270164 77.632921) (xy 98.217461 77.6188) + (xy 98.217459 77.6188) (xy 98.098841 77.6188) (xy 98.028717 77.637589) (xy 97.984259 77.649502) + (xy 97.881541 77.708807) (xy 97.797657 77.792691) (xy 97.738352 77.895409) (xy 97.738351 77.895414) + (xy 97.70765 78.009991) (xy 97.70765 78.128609) (xy 97.738351 78.243186) (xy 97.738352 78.243188) + (xy 97.755044 78.272099) (xy 97.767766 78.331948) (xy 97.74288 78.387843) (xy 97.689892 78.418436) + (xy 97.669308 78.4206) (xy 97.060259 78.4206) (xy 97.002068 78.401693) (xy 96.990261 78.391609) + (xy 96.909263 78.310611) (xy 96.90926 78.310609) (xy 96.909258 78.310607) (xy 96.806539 78.251302) + (xy 96.80654 78.251302) (xy 96.776258 78.243188) (xy 96.691959 78.2206) (xy 96.573341 78.2206) (xy 96.503217 78.239389) + (xy 96.458759 78.251302) (xy 96.356041 78.310607) (xy 96.272157 78.394491) (xy 96.212852 78.497209) + (xy 96.19864 78.55025) (xy 96.18215 78.611791) (xy 96.18215 78.730409) (xy 96.194049 78.774816) + (xy 96.212852 78.84499) (xy 96.272157 78.947708) (xy 96.272159 78.94771) (xy 96.272161 78.947713) + (xy 96.356037 79.031589) (xy 96.356039 79.03159) (xy 96.356041 79.031592) (xy 96.45876 79.090897) + (xy 96.458761 79.090897) (xy 96.458764 79.090899) (xy 96.573341 79.1216) (xy 96.573343 79.1216) + (xy 96.691957 79.1216) (xy 96.691959 79.1216) (xy 96.806536 79.090899) (xy 96.806538 79.090897) + (xy 96.80654 79.090897) (xy 96.909258 79.031592) (xy 96.909258 79.031591) (xy 96.909263 79.031589) + (xy 96.990257 78.950594) (xy 97.044772 78.922819) (xy 97.060259 78.9216) (xy 98.151297 78.9216) + (xy 98.209488 78.940507) (xy 98.245452 78.990007) (xy 98.245452 79.051193) (xy 98.221302 79.090601) + (xy 96.594716 80.717188) (xy 94.97467 82.337234) (xy 94.912759 82.429893) (xy 94.912758 82.429892) + (xy 94.903485 82.44377) (xy 94.85445 82.562152) (xy 94.854449 82.562155) (xy 94.854449 82.562156) + (xy 94.853285 82.568007) (xy 94.82945 82.68783) (xy 94.82945 84.835146) (xy 94.810543 84.893337) + (xy 94.800454 84.90515) (xy 91.68637 88.019234) (xy 91.622428 88.114933) (xy 91.622427 88.114934) + (xy 91.615186 88.125769) (xy 91.615184 88.125772) (xy 91.56615 88.244152) (xy 91.566149 88.244155) + (xy 91.566149 88.244156) (xy 91.563508 88.257432) (xy 91.54115 88.36983) (xy 91.54115 97.1736) (xy 91.522243 97.231791) + (xy 91.472743 97.267755) (xy 91.44215 97.2726) (xy 91.160129 97.2726) (xy 91.160126 97.272601) (xy 91.06635 97.287452) + (xy 91.066345 97.287454) (xy 90.953309 97.345049) (xy 90.863599 97.434759) (xy 90.806004 97.547795) + (xy 90.79115 97.641578) (xy 90.79115 99.004621) (xy 90.791151 99.004623) (xy 90.806002 99.098399) + (xy 90.806004 99.098404) (xy 90.8636 99.211442) (xy 90.953308 99.30115) (xy 91.066346 99.358746) + (xy 91.160131 99.3736) (xy 93.223168 99.373599) (xy 93.223171 99.373599) (xy 93.223172 99.373598) + (xy 93.270061 99.366172) (xy 93.316949 99.358747) (xy 93.316949 99.358746) (xy 93.316954 99.358746) + (xy 93.429992 99.30115) (xy 93.5197 99.211442) (xy 93.577296 99.098404) (xy 93.59215 99.004619) + (xy 93.592149 97.641582) (xy 93.592149 97.641581) (xy 93.592149 97.641578) (xy 93.592148 97.641576) + (xy 93.577297 97.5478) (xy 93.577296 97.547798) (xy 93.577296 97.547796) (xy 93.5197 97.434758) + (xy 93.429992 97.34505) (xy 93.316954 97.287454) (xy 93.316955 97.287454) (xy 93.223172 97.2726) + (xy 93.223169 97.2726) (xy 92.94115 97.2726) (xy 92.882959 97.253693) (xy 92.846995 97.204193) (xy 92.84215 97.1736) + (xy 92.84215 94.988198) (xy 92.861057 94.930007) (xy 92.910557 94.894043) (xy 92.971743 94.894043) + (xy 92.984623 94.899253) (xy 93.065257 94.938673) (xy 93.13339 94.9486) (xy 93.133393 94.9486) (xy 93.599907 94.9486) + (xy 93.59991 94.9486) (xy 93.668043 94.938673) (xy 93.773133 94.887298) (xy 93.855848 94.804583) + (xy 93.907223 94.699493) (xy 93.91715 94.63136) (xy 93.91715 94.01484) (xy 94.46615 94.01484) (xy 94.46615 94.63136) + (xy 94.469404 94.653692) (xy 94.476077 94.699495) (xy 94.50512 94.758902) (xy 94.527452 94.804583) + (xy 94.610167 94.887298) (xy 94.651064 94.907291) (xy 94.715254 94.938672) (xy 94.715255 94.938672) + (xy 94.715257 94.938673) (xy 94.78339 94.9486) (xy 94.783393 94.9486) (xy 95.249907 94.9486) (xy 95.24991 94.9486) + (xy 95.318043 94.938673) (xy 95.423133 94.887298) (xy 95.505848 94.804583) (xy 95.557223 94.699493) + (xy 95.560429 94.677491) (xy 95.563222 94.658325) (xy 95.590322 94.603469) (xy 95.64449 94.575018) + (xy 95.661187 94.5736) (xy 97.722113 94.5736) (xy 97.780304 94.592507) (xy 97.816268 94.642007) + (xy 97.820078 94.658325) (xy 97.826076 94.699492) (xy 97.85512 94.758902) (xy 97.877452 94.804583) + (xy 97.960167 94.887298) (xy 98.001064 94.907291) (xy 98.065254 94.938672) (xy 98.065255 94.938672) + (xy 98.065257 94.938673) (xy 98.13339 94.9486) (xy 98.133393 94.9486) (xy 98.599907 94.9486) (xy 98.59991 94.9486) + (xy 98.668043 94.938673) (xy 98.773133 94.887298) (xy 98.855848 94.804583) (xy 98.907223 94.699493) + (xy 98.91715 94.63136) (xy 98.91715 94.167867) (xy 98.936057 94.109676) (xy 98.946134 94.097876) + (xy 98.973779 94.070231) (xy 99.028293 94.042456) (xy 99.088725 94.052027) (xy 99.113784 94.070233) + (xy 99.116651 94.0731) (xy 99.766649 94.0731) (xy 99.76665 94.073099) (xy 99.76665 93.746009) (xy 99.785557 93.687818) + (xy 99.79564 93.676011) (xy 99.841239 93.630413) (xy 99.848539 93.617769) (xy 99.900547 93.52769) + (xy 99.900547 93.527688) (xy 99.900549 93.527686) (xy 99.93125 93.413109) (xy 99.93125 93.294491) + (xy 99.900549 93.179914) (xy 99.900547 93.179911) (xy 99.900547 93.179909) (xy 99.841242 93.077191) + (xy 99.84124 93.077189) (xy 99.841239 93.077187) (xy 99.757363 92.993311) (xy 99.75736 92.993309) + (xy 99.757358 92.993307) (xy 99.654639 92.934002) (xy 99.65464 92.934002) (xy 99.609366 92.921871) + (xy 99.540059 92.9033) (xy 99.421441 92.9033) (xy 99.352134 92.921871) (xy 99.306859 92.934002) + (xy 99.204141 92.993307) (xy 99.120257 93.077191) (xy 99.060953 93.179908) (xy 99.060951 93.179912) + (xy 99.060951 93.179914) (xy 99.037957 93.26573) (xy 99.033182 93.28355) (xy 99.007559 93.327929) + (xy 98.666883 93.668604) (xy 98.612368 93.696381) (xy 98.596881 93.6976) (xy 98.13339 93.6976) (xy 98.100247 93.702429) + (xy 98.065254 93.707527) (xy 97.960168 93.758901) (xy 97.877451 93.841618) (xy 97.826076 93.946707) + (xy 97.820078 93.987875) (xy 97.792978 94.042731) (xy 97.73881 94.071182) (xy 97.722113 94.0726) + (xy 95.661187 94.0726) (xy 95.602996 94.053693) (xy 95.567032 94.004193) (xy 95.563222 93.987875) + (xy 95.557223 93.946707) (xy 95.545584 93.922899) (xy 95.505848 93.841617) (xy 95.423133 93.758902) + (xy 95.39676 93.746009) (xy 95.318045 93.707527) (xy 95.289038 93.703301) (xy 95.24991 93.6976) + (xy 94.78339 93.6976) (xy 94.750247 93.702429) (xy 94.715254 93.707527) (xy 94.610168 93.758901) + (xy 94.527451 93.841618) (xy 94.476077 93.946704) (xy 94.472318 93.972506) (xy 94.46615 94.01484) + (xy 93.91715 94.01484) (xy 93.907223 93.946707) (xy 93.904823 93.941798) (xy 93.882133 93.895385) + (xy 93.855848 93.841617) (xy 93.773133 93.758902) (xy 93.771975 93.758336) (xy 93.767625 93.756209) + (xy 93.723653 93.713663) (xy 93.713087 93.653397) (xy 93.725374 93.617769) (xy 93.727137 93.614714) + (xy 93.727139 93.614713) (xy 93.786449 93.511986) (xy 93.81715 93.397409) (xy 93.81715 93.278791) + (xy 93.786449 93.164214) (xy 93.786447 93.164211) (xy 93.786447 93.164209) (xy 93.727142 93.061491) + (xy 93.72714 93.061489) (xy 93.727139 93.061487) (xy 93.643263 92.977611) (xy 93.64326 92.977609) + (xy 93.643258 92.977607) (xy 93.540539 92.918302) (xy 93.54054 92.918302) (xy 93.4968 92.906582) + (xy 93.425959 92.8876) (xy 93.307341 92.8876) (xy 93.248748 92.9033) (xy 93.192759 92.918302) (xy 93.090041 92.977607) + (xy 93.09004 92.977608) (xy 93.090037 92.97761) (xy 93.090037 92.977611) (xy 93.011151 93.056496) + (xy 92.956637 93.084272) (xy 92.896205 93.074701) (xy 92.85294 93.031436) (xy 92.84215 92.986491) + (xy 92.84215 88.744353) (xy 92.861057 88.686162) (xy 92.87114 88.674355) (xy 95.985226 85.56027) + (xy 96.056415 85.453727) (xy 96.105451 85.335344) (xy 96.105789 85.333644) (xy 96.106838 85.328374) + (xy 96.129564 85.214121) (xy 96.13045 85.209669) (xy 96.13045 83.981315) (xy 96.149357 83.923124) + (xy 96.198857 83.88716) (xy 96.260043 83.88716) (xy 96.29904 83.915493) (xy 96.301024 83.91351) + (xy 96.306823 83.919309) (xy 96.306824 83.919311) (xy 96.395439 84.007926) (xy 96.508025 84.062966) + (xy 96.581014 84.0736) (xy 96.581017 84.0736) (xy 97.102282 84.0736) (xy 97.102286 84.0736) (xy 97.175275 84.062966) + (xy 97.287861 84.007926) (xy 97.376476 83.919311) (xy 97.431516 83.806725) (xy 97.44215 83.733736) + (xy 97.44215 83.547253) (xy 97.461057 83.489062) (xy 97.503265 83.455789) (xy 97.588545 83.420465) + (xy 97.588545 83.420464) (xy 97.588547 83.420464) (xy 97.726413 83.282596) (xy 97.78093 83.254819) + (xy 97.796417 83.2536) (xy 97.910957 83.2536) (xy 97.910959 83.2536) (xy 98.025536 83.222899) (xy 98.055749 83.205454) + (xy 98.115597 83.192733) (xy 98.171493 83.217619) (xy 98.202086 83.270606) (xy 98.20425 83.291191) + (xy 98.20425 87.303101) (xy 98.185343 87.361292) (xy 98.175259 87.373098) (xy 98.131708 87.41665) + (xy 98.088599 87.459759) (xy 98.031004 87.572795) (xy 98.01615 87.666578) (xy 98.01615 87.73929) + (xy 97.999466 87.794291) (xy 97.931137 87.896553) (xy 97.863256 88.06043) (xy 97.863254 88.060436) + (xy 97.82865 88.234405) (xy 97.82865 88.411794) (xy 97.863254 88.585763) (xy 97.863256 88.585769) + (xy 97.931137 88.749646) (xy 97.999466 88.851909) (xy 98.01615 88.906909) (xy 98.01615 88.97962) + (xy 98.016151 88.979623) (xy 98.031002 89.073399) (xy 98.031004 89.073404) (xy 98.0886 89.186442) + (xy 98.178308 89.27615) (xy 98.291346 89.333746) (xy 98.385131 89.3486) (xy 98.44014 89.348599) + (xy 98.49833 89.367505) (xy 98.510145 89.377595) (xy 100.455654 91.323104) (xy 100.483431 91.377621) + (xy 100.48465 91.393108) (xy 100.48465 93.263868) (xy 100.465743 93.322059) (xy 100.416243 93.358023) + (xy 100.356201 93.358387) (xy 100.343753 93.354508) (xy 100.273231 93.3481) (xy 100.266651 93.3481) + (xy 100.26665 93.348101) (xy 100.26665 94.2241) (xy 100.247743 94.282291) (xy 100.198243 94.318255) + (xy 100.16765 94.3231) (xy 100.016651 94.3231) (xy 100.01665 94.323101) (xy 100.01665 94.4741) (xy 99.997743 94.532291) + (xy 99.948243 94.568255) (xy 99.91765 94.5731) (xy 99.116652 94.5731) (xy 99.116651 94.573101) (xy 99.116651 94.654682) + (xy 99.123058 94.725203) (xy 99.12306 94.725209) (xy 99.173629 94.887492) (xy 99.173632 94.8875) + (xy 99.261574 95.032972) (xy 99.381777 95.153175) (xy 99.527249 95.241117) (xy 99.527257 95.24112) + (xy 99.689539 95.291689) (xy 99.694683 95.292713) (xy 99.6943 95.294635) (xy 99.743099 95.315541) + (xy 99.774437 95.368091) (xy 99.768902 95.429026) (xy 99.747905 95.460045) (xy 98.990983 96.216967) + (xy 98.892437 96.364453) (xy 98.824556 96.52833) (xy 98.824554 96.528336) (xy 98.78995 96.702305) + (xy 98.78995 96.879694) (xy 98.824554 97.053663) (xy 98.824556 97.053669) (xy 98.892437 97.217546) + (xy 98.952 97.306689) (xy 98.968608 97.365577) (xy 98.94743 97.422981) (xy 98.896556 97.456973) + (xy 98.885173 97.459471) (xy 98.866348 97.462452) (xy 98.866345 97.462454) (xy 98.753309 97.520049) + (xy 98.663599 97.609759) (xy 98.606004 97.722795) (xy 98.592033 97.811009) (xy 98.59115 97.816581) + (xy 98.59115 98.254415) (xy 98.59025 98.258942) (xy 98.59025 98.387258) (xy 98.59115 98.391785) + (xy 98.59115 98.82962) (xy 98.591151 98.829623) (xy 98.606002 98.923399) (xy 98.606004 98.923404) + (xy 98.6636 99.036442) (xy 98.753308 99.12615) (xy 98.866346 99.183746) (xy 98.960131 99.1986) (xy 99.523168 99.198599) + (xy 99.52317 99.198599) (xy 99.523171 99.198598) (xy 99.570061 99.191172) (xy 99.616949 99.183747) + (xy 99.616949 99.183746) (xy 99.616954 99.183746) (xy 99.729992 99.12615) (xy 99.8197 99.036442) + (xy 99.877296 98.923404) (xy 99.89215 98.829619) (xy 99.892149 98.634825) (xy 99.894617 98.627228) + (xy 99.893368 98.619339) (xy 99.903892 98.598682) (xy 99.911056 98.576636) (xy 99.921138 98.564829) + (xy 99.972648 98.513319) (xy 100.027163 98.485544) (xy 100.087595 98.495115) (xy 100.13086 98.53838) + (xy 100.14165 98.583325) (xy 100.14165 98.848086) (xy 100.152142 98.950787) (xy 100.152145 98.950799) + (xy 100.207293 99.117224) (xy 100.29933 99.26644) (xy 100.427384 99.394494) (xy 100.425894 99.395983) + (xy 100.454857 99.439477) (xy 100.452359 99.500612) (xy 100.414404 99.548602) (xy 100.359532 99.5652) + (xy 98.394704 99.5652) (xy 98.336513 99.546293) (xy 98.3247 99.536204) (xy 97.621145 98.832649) + (xy 97.593368 98.778132) (xy 97.592149 98.762645) (xy 97.592149 97.641578) (xy 97.592148 97.641576) + (xy 97.577297 97.5478) (xy 97.577296 97.547798) (xy 97.577296 97.547796) (xy 97.5197 97.434758) + (xy 97.429992 97.34505) (xy 97.316954 97.287454) (xy 97.316955 97.287454) (xy 97.223171 97.2726) + (xy 95.160128 97.2726) (xy 95.160126 97.272601) (xy 95.06635 97.287452) (xy 95.066345 97.287454) + (xy 94.953309 97.345049) (xy 94.863599 97.434759) (xy 94.806004 97.547795) (xy 94.79115 97.641578) + (xy 94.79115 99.004621) (xy 94.791151 99.004623) (xy 94.806002 99.098399) (xy 94.806004 99.098404) + (xy 94.8636 99.211442) (xy 94.953308 99.30115) (xy 95.066346 99.358746) (xy 95.160131 99.3736) (xy 96.281195 99.373599) + (xy 96.339386 99.392506) (xy 96.351199 99.402595) (xy 97.669581 100.720977) (xy 97.669584 100.720979) + (xy 97.776119 100.792163) (xy 97.77612 100.792163) (xy 97.776124 100.792166) (xy 97.81897 100.809913) + (xy 97.894506 100.841201) (xy 97.924219 100.847111) (xy 97.930977 100.849509) (xy 97.949829 100.863992) + (xy 97.970574 100.87561) (xy 97.973656 100.882297) (xy 97.979497 100.886784) (xy 97.986236 100.909584) + (xy 97.99619 100.931175) (xy 97.994753 100.938397) (xy 97.996841 100.94546) (xy 97.988891 100.967867) + (xy 97.984253 100.991185) (xy 97.983613 100.992311) (xy 97.954051 101.043512) (xy 97.946743 101.070787) + (xy 97.92335 101.158091) (xy 97.92335 101.276709) (xy 97.942479 101.348099) (xy 97.954052 101.39129) + (xy 98.013357 101.494008) (xy 98.013359 101.49401) (xy 98.013361 101.494013) (xy 98.019915 101.500567) + (xy 98.027032 101.514536) (xy 98.038119 101.525622) (xy 98.040572 101.54111) (xy 98.047691 101.555082) + (xy 98.045238 101.570568) (xy 98.047691 101.586054) (xy 98.040573 101.600024) (xy 98.03812 101.615514) + (xy 98.019915 101.640571) (xy 97.991885 101.668602) (xy 97.937369 101.696381) (xy 97.92188 101.6976) + (xy 97.45839 101.6976) (xy 97.425247 101.702429) (xy 97.390254 101.707527) (xy 97.285168 101.758901) + (xy 97.202451 101.841618) (xy 97.151077 101.946704) (xy 97.148366 101.965314) (xy 97.14115 102.01484) + (xy 97.14115 102.63136) (xy 97.143215 102.645531) (xy 97.151077 102.699495) (xy 97.192345 102.783909) + (xy 97.202452 102.804583) (xy 97.285167 102.887298) (xy 97.323769 102.906169) (xy 97.390254 102.938672) + (xy 97.390255 102.938672) (xy 97.390257 102.938673) (xy 97.45839 102.9486) (xy 97.458393 102.9486) + (xy 97.924907 102.9486) (xy 97.92491 102.9486) (xy 97.993043 102.938673) (xy 98.098133 102.887298) + (xy 98.180848 102.804583) (xy 98.232223 102.699493) (xy 98.24215 102.63136) (xy 98.24215 102.167867) + (xy 98.261057 102.109677) (xy 98.271146 102.097864) (xy 98.567314 101.801696) (xy 98.621831 101.773919) + (xy 98.637318 101.7727) (xy 98.808899 101.7727) (xy 98.86709 101.791607) (xy 98.903054 101.841107) + (xy 98.903054 101.902293) (xy 98.86709 101.951793) (xy 98.858399 101.957436) (xy 98.849441 101.962607) + (xy 98.765557 102.046491) (xy 98.706252 102.149209) (xy 98.694438 102.193299) (xy 98.67555 102.263791) + (xy 98.67555 102.382409) (xy 98.692604 102.446054) (xy 98.706251 102.496986) (xy 98.706252 102.496989) + (xy 98.765557 102.599708) (xy 98.765559 102.59971) (xy 98.765561 102.599713) (xy 98.849437 102.683589) + (xy 98.849439 102.68359) (xy 98.849441 102.683592) (xy 98.95216 102.742897) (xy 98.952161 102.742897) + (xy 98.952164 102.742899) (xy 99.066741 102.7736) (xy 99.066743 102.7736) (xy 99.185357 102.7736) + (xy 99.185359 102.7736) (xy 99.299936 102.742899) (xy 99.381495 102.69581) (xy 99.394246 102.693099) + (xy 99.405165 102.685976) (xy 99.423438 102.686894) (xy 99.44134 102.683089) (xy 99.453252 102.688392) + (xy 99.466273 102.689047) (xy 99.477255 102.699079) (xy 99.497236 102.707975) (xy 99.513906 102.72745) + (xy 99.517249 102.732573) (xy 99.552452 102.804583) (xy 99.586348 102.838479) (xy 99.591975 102.847103) + (xy 99.597401 102.867181) (xy 99.606843 102.885713) (xy 99.605204 102.896057) (xy 99.607937 102.906169) + (xy 99.600525 102.925601) (xy 99.597272 102.946145) (xy 99.589865 102.953551) (xy 99.586133 102.963338) + (xy 99.568714 102.974702) (xy 99.554007 102.98941) (xy 99.541611 102.992385) (xy 99.53489 102.996771) + (xy 99.525343 102.996291) (xy 99.509062 103.0002) (xy 99.414141 103.0002) (xy 99.355399 103.01594) + (xy 99.299559 103.030902) (xy 99.196841 103.090207) (xy 99.19684 103.090208) (xy 99.196837 103.09021) + (xy 99.196837 103.090211) (xy 99.115842 103.171205) (xy 99.061328 103.198981) (xy 99.045841 103.2002) + (xy 97.314019 103.2002) (xy 97.255828 103.181293) (xy 97.244015 103.171204) (xy 96.621146 102.548335) + (xy 96.593369 102.493818) (xy 96.59215 102.478331) (xy 96.59215 102.014843) (xy 96.59215 102.01484) + (xy 96.582223 101.946707) (xy 96.57143 101.92463) (xy 96.547678 101.876044) (xy 96.530848 101.841617) + (xy 96.448133 101.758902) (xy 96.447718 101.758699) (xy 96.343045 101.707527) (xy 96.308053 101.702429) + (xy 96.27491 101.6976) (xy 95.80839 101.6976) (xy 95.775247 101.702429) (xy 95.740254 101.707527) + (xy 95.635168 101.758901) (xy 95.552451 101.841618) (xy 95.501077 101.946704) (xy 95.498366 101.965314) + (xy 95.49115 102.01484) (xy 95.49115 102.63136) (xy 95.493215 102.645531) (xy 95.501077 102.699495) + (xy 95.542345 102.783909) (xy 95.552452 102.804583) (xy 95.635167 102.887298) (xy 95.673769 102.906169) + (xy 95.740254 102.938672) (xy 95.740255 102.938672) (xy 95.740257 102.938673) (xy 95.80839 102.9486) + (xy 95.808393 102.9486) (xy 96.271881 102.9486) (xy 96.330072 102.967507) (xy 96.341885 102.977596) + (xy 97.027353 103.663064) (xy 97.027354 103.663064) (xy 97.027355 103.663065) (xy 97.119421 103.7012) + (xy 97.119422 103.7012) (xy 97.219078 103.7012) (xy 99.045841 103.7012) (xy 99.104032 103.720107) + (xy 99.115838 103.73019) (xy 99.196837 103.811189) (xy 99.196839 103.81119) (xy 99.196841 103.811192) + (xy 99.29956 103.870497) (xy 99.299561 103.870497) (xy 99.299564 103.870499) (xy 99.414141 103.9012) + (xy 99.414143 103.9012) (xy 99.532757 103.9012) (xy 99.532759 103.9012) (xy 99.647336 103.870499) + (xy 99.676148 103.853863) (xy 99.735996 103.841141) (xy 99.791892 103.866026) (xy 99.822486 103.919013) + (xy 99.82465 103.939599) (xy 99.82465 104.14483) (xy 99.805743 104.203021) (xy 99.795654 104.214834) + (xy 97.341884 106.668604) (xy 97.287367 106.696381) (xy 97.27188 106.6976) (xy 96.80839 106.6976) + (xy 96.778301 106.701984) (xy 96.740254 106.707527) (xy 96.635168 106.758901) (xy 96.552451 106.841618) + (xy 96.501077 106.946704) (xy 96.501077 106.946707) (xy 96.49115 107.01484) (xy 96.49115 107.63136) + (xy 96.497145 107.672507) (xy 96.501077 107.699495) (xy 96.538873 107.776807) (xy 96.552452 107.804583) + (xy 96.635167 107.887298) (xy 96.688935 107.913583) (xy 96.740254 107.938672) (xy 96.740255 107.938672) + (xy 96.740257 107.938673) (xy 96.80839 107.9486) (xy 96.808393 107.9486) (xy 97.274907 107.9486) + (xy 97.27491 107.9486) (xy 97.343043 107.938673) (xy 97.448133 107.887298) (xy 97.530848 107.804583) + (xy 97.582223 107.699493) (xy 97.59215 107.63136) (xy 97.59215 107.167867) (xy 97.611057 107.109676) + (xy 97.62114 107.097869) (xy 100.217045 104.501964) (xy 100.217047 104.501964) (xy 100.287514 104.431497) + (xy 100.32565 104.339428) (xy 100.32565 103.008975) (xy 100.344557 102.950784) (xy 100.38117 102.920034) + (xy 100.409531 102.906169) (xy 100.448133 102.887298) (xy 100.530848 102.804583) (xy 100.582223 102.699493) + (xy 100.59215 102.63136) (xy 100.59215 102.01484) (xy 100.582223 101.946707) (xy 100.581507 101.945242) + (xy 100.566811 101.91518) (xy 100.565807 101.908088) (xy 100.561597 101.902293) (xy 100.561597 101.878326) + (xy 100.55824 101.854598) (xy 100.561597 101.84827) (xy 100.561597 101.841107) (xy 100.575685 101.821716) + (xy 100.586916 101.800548) (xy 100.59335 101.797402) (xy 100.597561 101.791607) (xy 100.620354 101.784201) + (xy 100.641884 101.773676) (xy 100.655752 101.7727) (xy 100.745982 101.7727) (xy 100.804173 101.791607) + (xy 100.815985 101.801696) (xy 101.112153 102.097863) (xy 101.139931 102.15238) (xy 101.14115 102.167867) + (xy 101.14115 102.63136) (xy 101.143215 102.645531) (xy 101.151077 102.699495) (xy 101.192345 102.783909) + (xy 101.202452 102.804583) (xy 101.285167 102.887298) (xy 101.323769 102.906169) (xy 101.390254 102.938672) + (xy 101.390255 102.938672) (xy 101.390257 102.938673) (xy 101.45839 102.9486) (xy 101.458393 102.9486) + (xy 101.903642 102.9486) (xy 101.961833 102.967507) (xy 101.997797 103.017007) (xy 101.997797 103.078193) + (xy 101.973646 103.117604) (xy 100.607481 104.483769) (xy 100.572943 104.535462) (xy 100.572942 104.535464) + (xy 100.508935 104.631255) (xy 100.475722 104.711441) (xy 100.475722 104.711442) (xy 100.441056 104.79513) + (xy 100.441054 104.795138) (xy 100.436648 104.817289) (xy 100.410094 104.950793) (xy 100.407349 104.964592) + (xy 100.407348 104.964596) (xy 100.40645 104.969107) (xy 100.40645 106.643793) (xy 100.387543 106.701984) + (xy 100.377454 106.713797) (xy 100.342185 106.749065) (xy 100.243635 106.896554) (xy 100.243635 106.896555) + (xy 100.196133 107.011238) (xy 100.156397 107.057764) (xy 100.096902 107.072048) (xy 100.055169 107.05909) + (xy 99.963737 107.006301) (xy 99.908565 106.991518) (xy 99.849159 106.9756) (xy 99.730541 106.9756) + (xy 99.671135 106.991518) (xy 99.615959 107.006302) (xy 99.513241 107.065607) (xy 99.51324 107.065608) + (xy 99.513237 107.06561) (xy 99.513237 107.065611) (xy 99.432242 107.146605) (xy 99.425127 107.15023) + (xy 99.420432 107.156693) (xy 99.398383 107.163856) (xy 99.377728 107.174381) (xy 99.362241 107.1756) + (xy 99.34115 107.1756) (xy 99.282959 107.156693) (xy 99.246995 107.107193) (xy 99.24215 107.0766) + (xy 99.24215 107.014843) (xy 99.24215 107.01484) (xy 99.232223 106.946707) (xy 99.21965 106.920989) + (xy 99.190267 106.860885) (xy 99.180848 106.841617) (xy 99.098133 106.758902) (xy 99.059129 106.739834) + (xy 98.993045 106.707527) (xy 98.965789 106.703556) (xy 98.92491 106.6976) (xy 98.45839 106.6976) + (xy 98.428301 106.701984) (xy 98.390254 106.707527) (xy 98.285168 106.758901) (xy 98.202451 106.841618) + (xy 98.151077 106.946704) (xy 98.151077 106.946707) (xy 98.14115 107.01484) (xy 98.14115 107.63136) + (xy 98.147145 107.672507) (xy 98.151077 107.699495) (xy 98.188873 107.776807) (xy 98.202452 107.804583) + (xy 98.285167 107.887298) (xy 98.338935 107.913583) (xy 98.390254 107.938672) (xy 98.390255 107.938672) + (xy 98.390257 107.938673) (xy 98.45839 107.9486) (xy 98.458393 107.9486) (xy 98.924907 107.9486) + (xy 98.92491 107.9486) (xy 98.993043 107.938673) (xy 99.098133 107.887298) (xy 99.180848 107.804583) + (xy 99.216273 107.732118) (xy 99.232933 107.714898) (xy 99.247022 107.695507) (xy 99.253835 107.693293) + (xy 99.258815 107.688146) (xy 99.305213 107.6766) (xy 99.362241 107.6766) (xy 99.420432 107.695507) + (xy 99.432238 107.70559) (xy 99.513237 107.786589) (xy 99.513239 107.78659) (xy 99.513241 107.786592) + (xy 99.61596 107.845897) (xy 99.615961 107.845897) (xy 99.615964 107.845899) (xy 99.730541 107.8766) + (xy 99.730543 107.8766) (xy 99.849157 107.8766) (xy 99.849159 107.8766) (xy 99.963736 107.845899) + (xy 99.963738 107.845897) (xy 99.96374 107.845897) (xy 100.066458 107.786592) (xy 100.066458 107.786591) + (xy 100.066463 107.786589) (xy 100.10217 107.750881) (xy 100.156684 107.723105) (xy 100.217116 107.732676) + (xy 100.254485 107.765882) (xy 100.342186 107.897135) (xy 100.467615 108.022564) (xy 100.615103 108.121113) + (xy 100.615104 108.121113) (xy 100.615105 108.121114) (xy 100.65418 108.137299) (xy 100.778984 108.188994) + (xy 100.828353 108.198813) (xy 100.879042 108.225907) (xy 101.046627 108.393492) (xy 101.191939 108.538803) + (xy 101.219717 108.59332) (xy 101.219034 108.62812) (xy 101.19115 108.768303) (xy 101.19115 112.411793) + (xy 101.204357 112.478189) (xy 101.224984 112.581887) (xy 101.225756 112.585765) (xy 101.225756 112.585767) + (xy 101.293635 112.749644) (xy 101.293635 112.749645) (xy 101.392185 112.897134) (xy 101.490547 112.995496) + (xy 101.518324 113.050013) (xy 101.508753 113.110445) (xy 101.465488 113.15371) (xy 101.420543 113.1645) + (xy 100.417746 113.1645) (xy 100.359555 113.145593) (xy 100.323591 113.096093) (xy 100.323591 113.034907) + (xy 100.333024 113.014283) (xy 100.409667 112.8875) (xy 100.40967 112.887492) (xy 100.460239 112.72521) (xy 100.460241 112.725204) (xy 100.466649 112.654681) (xy 100.46665 112.654668) (xy 100.46665 112.573101) - (xy 100.466649 112.5731) (xy 99.66565 112.5731) (xy 99.607459 112.554193) (xy 99.571495 112.504693) - (xy 99.56665 112.4741) (xy 99.56665 112.323101) (xy 99.566649 112.3231) (xy 99.41565 112.3231) (xy 99.357459 112.304193) - (xy 99.321495 112.254693) (xy 99.31665 112.2241) (xy 99.31665 111.348101) (xy 99.81665 111.348101) - (xy 99.81665 112.073099) (xy 99.816651 112.0731) (xy 100.466648 112.0731) (xy 100.466649 112.073099) - (xy 100.466649 111.991533) (xy 100.466648 111.991517) (xy 100.460241 111.920996) (xy 100.460239 111.92099) - (xy 100.409668 111.758701) (xy 100.409667 111.758699) (xy 100.321725 111.613227) (xy 100.201522 111.493024) - (xy 100.05605 111.405082) (xy 100.056042 111.405079) (xy 99.89376 111.35451) (xy 99.893754 111.354508) - (xy 99.823231 111.3481) (xy 99.816651 111.3481) (xy 99.81665 111.348101) (xy 99.31665 111.348101) - (xy 99.316648 111.348099) (xy 99.310075 111.3481) (xy 99.239546 111.354508) (xy 99.23954 111.35451) - (xy 99.077257 111.405079) (xy 99.077249 111.405082) (xy 98.931777 111.493024) (xy 98.811574 111.613227) - (xy 98.723632 111.758699) (xy 98.723628 111.758709) (xy 98.722956 111.760867) (xy 98.722137 111.762022) - (xy 98.721173 111.764165) (xy 98.720753 111.763976) (xy 98.687587 111.810793) (xy 98.629627 111.830396) - (xy 98.571214 111.812186) (xy 98.549189 111.790732) (xy 98.544983 111.785114) (xy 98.474196 111.690554) - (xy 98.474191 111.69055) (xy 98.358979 111.604302) (xy 98.224138 111.55401) (xy 98.224133 111.554009) - (xy 98.224131 111.554008) (xy 98.224127 111.554008) (xy 98.192899 111.55065) (xy 98.164523 111.5476) - (xy 98.16452 111.5476) (xy 97.668783 111.5476) (xy 97.668779 111.5476) (xy 97.668778 111.547601) - (xy 97.661848 111.548346) (xy 97.609169 111.554008) (xy 97.609164 111.554009) (xy 97.47432 111.604302) - (xy 97.359108 111.69055) (xy 97.3591 111.690558) (xy 97.26861 111.811438) (xy 97.26687 111.810135) - (xy 97.229806 111.845128) (xy 97.169124 111.852957) (xy 97.115428 111.823624) (xy 97.092898 111.785114) - (xy 97.084667 111.758701) (xy 97.084667 111.758699) (xy 96.996725 111.613227) (xy 96.876522 111.493024) - (xy 96.73105 111.405082) (xy 96.731042 111.405079) (xy 96.56876 111.35451) (xy 96.568754 111.354508) - (xy 96.498231 111.3481) (xy 96.491651 111.3481) (xy 96.49165 111.348101) (xy 96.49165 112.2241) - (xy 96.472743 112.282291) (xy 96.423243 112.318255) (xy 96.39265 112.3231) (xy 96.09065 112.3231) - (xy 96.032459 112.304193) (xy 95.996495 112.254693) (xy 95.99165 112.2241) (xy 95.99165 111.348101) - (xy 95.991648 111.348099) (xy 95.985075 111.3481) (xy 95.914546 111.354508) (xy 95.91454 111.35451) - (xy 95.752257 111.405079) (xy 95.752249 111.405082) (xy 95.606777 111.493024) (xy 95.486574 111.613227) - (xy 95.454572 111.666165) (xy 95.408287 111.706182) (xy 95.34732 111.71135) (xy 95.294959 111.679696) - (xy 95.271204 111.623311) (xy 95.27085 111.614948) (xy 95.27085 105.523774) (xy 95.27085 105.523773) - (xy 95.252524 105.455377) (xy 95.248602 105.44074) (xy 95.248602 105.440739) (xy 95.246754 105.433846) - (xy 95.243557 105.421912) (xy 95.230905 105.399998) (xy 95.190833 105.330591) (xy 95.190831 105.330589) - (xy 95.19083 105.330587) (xy 94.412863 104.55262) (xy 94.41286 104.552618) (xy 94.412858 104.552616) - (xy 94.321541 104.499894) (xy 94.321543 104.499894) (xy 94.28202 104.489304) (xy 94.219677 104.4726) - (xy 94.219675 104.4726) (xy 92.829158 104.4726) (xy 92.770967 104.453693) (xy 92.749502 104.432388) - (xy 92.745206 104.426567) (xy 92.7263 104.40095) (xy 92.70895 104.388145) (xy 92.617033 104.320307) - (xy 92.488853 104.275455) (xy 92.488844 104.275453) (xy 92.458424 104.2726) (xy 92.458416 104.2726) - (xy 91.917251 104.2726) (xy 91.909653 104.270131) (xy 91.901764 104.271381) (xy 91.881108 104.260856) - (xy 91.85906 104.253693) (xy 91.847247 104.243604) (xy 91.726246 104.122603) (xy 91.698469 104.068086) - (xy 91.69725 104.052599) (xy 91.69725 103.980444) (xy 91.690356 103.954716) (xy 91.656327 103.827716) - (xy 91.57727 103.690784) (xy 91.465466 103.57898) (xy 91.328534 103.499923) (xy 91.175807 103.459) - (xy 91.017693 103.459) (xy 90.864966 103.499923) (xy 90.728034 103.57898) (xy 90.61623 103.690784) - (xy 90.537173 103.827716) (xy 90.49625 103.980443) (xy 90.49625 104.138557) (xy 90.537173 104.291284) - (xy 90.61623 104.428216) (xy 90.728034 104.54002) (xy 90.728036 104.540021) (xy 90.728037 104.540022) - (xy 90.732509 104.542604) (xy 90.773451 104.588072) (xy 90.78158 104.637584) (xy 90.77865 104.668833) - (xy 90.77865 105.077374) (xy 90.781503 105.107794) (xy 90.781505 105.107803) (xy 90.826357 105.235983) - (xy 90.906995 105.345244) (xy 90.906997 105.345246) (xy 90.907 105.34525) (xy 90.907003 105.345252) - (xy 90.907005 105.345254) (xy 91.016266 105.425892) (xy 91.016267 105.425892) (xy 91.016268 105.425893) - (xy 91.144451 105.470746) (xy 91.174875 105.473599) (xy 91.174877 105.4736) (xy 91.174884 105.4736) - (xy 92.458423 105.4736) (xy 92.458423 105.473599) (xy 92.488849 105.470746) (xy 92.532771 105.455376) - (xy 92.593937 105.454003) (xy 92.644233 105.488846) (xy 92.664442 105.546598) (xy 92.658913 105.581514) - (xy 92.656505 105.588396) (xy 92.656503 105.588405) (xy 92.65365 105.618825) (xy 92.65365 105.886854) - (xy 92.634743 105.945045) (xy 92.585243 105.981009) (xy 92.527033 105.981924) (xy 92.506639 105.975999) - (xy 92.469787 105.9731) (xy 92.066651 105.9731) (xy 92.06665 105.973101) (xy 92.06665 107.582677) - (xy 92.084477 107.617666) (xy 92.074906 107.678098) (xy 92.0567 107.703157) (xy 90.343366 109.416491) - (xy 90.290644 109.507808) (xy 90.290642 109.507812) (xy 90.282069 109.539805) (xy 90.28207 109.539806) - (xy 90.264571 109.605117) (xy 90.26335 109.609673) (xy 90.26335 116.780873) (xy 90.26335 116.886327) - (xy 90.284029 116.963504) (xy 90.290644 116.988192) (xy 90.343366 117.079508) (xy 90.34337 117.079513) - (xy 90.670567 117.406711) (xy 90.670568 117.406711) (xy 90.67057 117.406713) (xy 90.670569 117.406713) - (xy 90.745137 117.48128) (xy 90.823846 117.526723) (xy 90.823854 117.526727) (xy 90.836463 117.534007) - (xy 90.938323 117.561301) (xy 90.938325 117.561301) (xy 91.04984 117.561301) (xy 91.049856 117.5613) - (xy 98.469175 117.5613) (xy 98.469177 117.5613) (xy 98.571038 117.534007) (xy 98.57104 117.534005) - (xy 98.571042 117.534005) (xy 98.662363 117.48128) (xy 98.725856 117.417787) (xy 98.801854 117.341787) - (xy 98.85637 117.31401) (xy 98.88366 117.313497) (xy 98.96779 117.3236) (xy 98.967792 117.3236) - (xy 99.540508 117.3236) (xy 99.54051 117.3236) (xy 99.624637 117.313497) (xy 99.684667 117.325331) - (xy 99.706444 117.341787) (xy 99.934507 117.569849) (xy 99.934512 117.569855) (xy 99.934513 117.569855) - (xy 99.937968 117.57331) (xy 99.93797 117.573313) (xy 100.012537 117.64788) (xy 100.048209 117.668475) - (xy 100.100715 117.69879) (xy 100.100716 117.69879) (xy 100.103863 117.700607) (xy 100.103866 117.700608) - (xy 100.151904 117.71348) (xy 100.20572 117.7279) (xy 100.205722 117.727901) (xy 100.205723 117.727901) - (xy 100.31724 117.727901) (xy 100.317256 117.7279) (xy 106.803075 117.7279) (xy 106.803077 117.7279) - (xy 106.904938 117.700607) (xy 106.90494 117.700605) (xy 106.904942 117.700605) (xy 106.996258 117.647883) - (xy 106.996258 117.647882) (xy 106.996263 117.64788) (xy 110.906247 113.737896) (xy 110.960764 113.710119) - (xy 110.976251 113.7089) (xy 111.048405 113.7089) (xy 111.048407 113.7089) (xy 111.201134 113.667977) - (xy 111.338066 113.58892) (xy 111.44987 113.477116) (xy 111.528927 113.340184) (xy 111.56985 113.187457) - (xy 111.56985 113.187454) (xy 111.570216 113.184676) (xy 111.57108 113.182864) (xy 111.571529 113.181189) - (xy 111.571839 113.181272) (xy 111.596558 113.129451) (xy 111.650329 113.100257) (xy 111.668369 113.098599) - (xy 111.989517 113.098599) (xy 111.989522 113.098599) (xy 112.049133 113.092191) (xy 112.142153 113.057497) - (xy 112.183979 113.041897) (xy 112.183979 113.041896) (xy 112.183981 113.041896) (xy 112.299196 112.955646) - (xy 112.385446 112.840431) (xy 112.405 112.788001) (xy 112.44305 112.740089) (xy 112.497758 112.7236) - (xy 113.335542 112.7236) (xy 113.393733 112.742507) (xy 113.428299 112.788001) (xy 113.440314 112.820214) - (xy 113.447854 112.840432) (xy 113.528513 112.948178) (xy 113.534104 112.955646) (xy 113.534107 112.955648) - (xy 113.534108 112.955649) (xy 113.64932 113.041897) (xy 113.784161 113.092189) (xy 113.784162 113.092189) - (xy 113.784167 113.092191) (xy 113.843777 113.0986) (xy 114.259748 113.098599) (xy 114.317939 113.117506) - (xy 114.329751 113.127595) (xy 114.623436 113.421279) (xy 114.623441 113.421283) (xy 114.714758 113.474005) - (xy 114.714756 113.474005) (xy 114.71476 113.474006) (xy 114.714762 113.474007) (xy 114.816623 113.5013) - (xy 114.816625 113.5013) (xy 123.349549 113.5013) (xy 123.40774 113.520207) (xy 123.443704 113.569707) - (xy 123.443704 113.630893) (xy 123.419553 113.670303) (xy 123.17117 113.918686) (xy 123.171166 113.918691) - (xy 123.118444 114.010007) (xy 123.09551 114.095597) (xy 123.09551 114.0956) (xy 123.09115 114.111873) - (xy 123.09115 114.111875) (xy 123.09115 117.457622) (xy 123.072243 117.515813) (xy 123.062159 117.527619) - (xy 123.01993 117.569849) (xy 122.989444 117.600335) (xy 122.944064 117.703111) (xy 122.94115 117.72823) - (xy 122.94115 118.11796) (xy 122.941151 118.117963) (xy 122.944064 118.14309) (xy 122.954625 118.167007) - (xy 122.989444 118.245865) (xy 122.989445 118.245866) (xy 122.989445 118.245867) (xy 122.996677 118.253099) - (xy 123.024453 118.307617) (xy 123.014879 118.368048) (xy 122.996677 118.393101) (xy 122.989445 118.400332) - (xy 122.989445 118.400333) (xy 122.944064 118.503111) (xy 122.94115 118.52823) (xy 122.94115 118.91796) - (xy 122.941151 118.917963) (xy 122.944064 118.94309) (xy 122.947764 118.951469) (xy 122.989444 119.045865) - (xy 123.068885 119.125306) (xy 123.171659 119.170685) (xy 123.196785 119.1736) (xy 123.786514 119.173599) - (xy 123.811641 119.170685) (xy 123.811647 119.170682) (xy 123.814454 119.169919) (xy 123.817128 119.170048) - (xy 123.81904 119.169827) (xy 123.819076 119.170143) (xy 123.875567 119.172883) (xy 123.923267 119.211202) - (xy 123.93945 119.265445) (xy 123.93945 121.726199) (xy 123.920543 121.78439) (xy 123.910454 121.796203) - (xy 117.471166 128.235491) (xy 117.418443 128.326811) (xy 117.418442 128.326811) (xy 117.418443 128.326812) - (xy 117.39115 128.428673) (xy 117.39115 128.491378) (xy 117.372243 128.549569) (xy 117.337095 128.579587) - (xy 117.328053 128.584195) (xy 117.214863 128.641866) (xy 117.074723 128.743685) (xy 116.952235 128.866173) - (xy 116.850416 129.006314) (xy 116.771775 129.160658) (xy 116.771773 129.160661) (xy 116.718248 129.325393) - (xy 116.718247 129.325397) (xy 116.69115 129.496485) (xy 116.69115 129.669714) (xy 116.718247 129.840802) - (xy 116.718248 129.840806) (xy 116.771773 130.005538) (xy 116.771775 130.005541) (xy 116.833763 130.127202) - (xy 116.850418 130.159888) (xy 116.952236 130.300028) (xy 117.074722 130.422514) (xy 117.214862 130.524332) - (xy 117.369205 130.602973) (xy 117.369207 130.602973) (xy 117.369208 130.602974) (xy 117.369211 130.602976) - (xy 117.533943 130.656501) (xy 117.533947 130.656502) (xy 117.705036 130.6836) (xy 117.705039 130.6836) - (xy 117.878264 130.6836) (xy 118.049352 130.656502) (xy 118.049356 130.656501) (xy 118.214088 130.602976) - (xy 118.21409 130.602974) (xy 118.214095 130.602973) (xy 118.368438 130.524332) (xy 118.508578 130.422514) - (xy 118.631064 130.300028) (xy 118.732882 130.159888) (xy 118.811523 130.005545) (xy 118.811524 130.00554) - (xy 118.811526 130.005538) (xy 118.865051 129.840806) (xy 118.865052 129.840802) (xy 118.89215 129.669714) - (xy 118.89215 129.496485) (xy 119.23115 129.496485) (xy 119.23115 129.669714) (xy 119.258247 129.840802) - (xy 119.258248 129.840806) (xy 119.311773 130.005538) (xy 119.311775 130.005541) (xy 119.373763 130.127202) - (xy 119.390418 130.159888) (xy 119.492236 130.300028) (xy 119.614722 130.422514) (xy 119.754862 130.524332) - (xy 119.909205 130.602973) (xy 119.909207 130.602973) (xy 119.909208 130.602974) (xy 119.909211 130.602976) - (xy 120.073943 130.656501) (xy 120.073947 130.656502) (xy 120.245036 130.6836) (xy 120.245039 130.6836) - (xy 120.418264 130.6836) (xy 120.589352 130.656502) (xy 120.589356 130.656501) (xy 120.754088 130.602976) - (xy 120.75409 130.602974) (xy 120.754095 130.602973) (xy 120.908438 130.524332) (xy 121.048578 130.422514) - (xy 121.171064 130.300028) (xy 121.272882 130.159888) (xy 121.351523 130.005545) (xy 121.351524 130.00554) - (xy 121.351526 130.005538) (xy 121.405051 129.840806) (xy 121.405052 129.840802) (xy 121.43215 129.669714) - (xy 121.43215 129.496485) (xy 121.77115 129.496485) (xy 121.77115 129.669714) (xy 121.798247 129.840802) - (xy 121.798248 129.840806) (xy 121.851773 130.005538) (xy 121.851775 130.005541) (xy 121.913763 130.127202) - (xy 121.930418 130.159888) (xy 122.032236 130.300028) (xy 122.154722 130.422514) (xy 122.294862 130.524332) - (xy 122.449205 130.602973) (xy 122.449207 130.602973) (xy 122.449208 130.602974) (xy 122.449211 130.602976) - (xy 122.613943 130.656501) (xy 122.613947 130.656502) (xy 122.785036 130.6836) (xy 122.785039 130.6836) - (xy 122.958264 130.6836) (xy 123.129352 130.656502) (xy 123.129356 130.656501) (xy 123.294088 130.602976) - (xy 123.29409 130.602974) (xy 123.294095 130.602973) (xy 123.448438 130.524332) (xy 123.588578 130.422514) - (xy 123.711064 130.300028) (xy 123.812882 130.159888) (xy 123.891523 130.005545) (xy 123.891524 130.00554) - (xy 123.891526 130.005538) (xy 123.945051 129.840806) (xy 123.945052 129.840802) (xy 123.97215 129.669714) - (xy 123.97215 129.496485) (xy 123.945052 129.325397) (xy 123.945051 129.325393) (xy 123.891526 129.160661) - (xy 123.891524 129.160658) (xy 123.891523 129.160657) (xy 123.891523 129.160655) (xy 123.812882 129.006312) - (xy 123.711064 128.866172) (xy 123.588578 128.743686) (xy 123.448438 128.641868) (xy 123.448437 128.641867) - (xy 123.448435 128.641866) (xy 123.294091 128.563225) (xy 123.294088 128.563223) (xy 123.129356 128.509698) - (xy 123.129352 128.509697) (xy 122.958264 128.4826) (xy 122.958261 128.4826) (xy 122.785039 128.4826) - (xy 122.785036 128.4826) (xy 122.613947 128.509697) (xy 122.613943 128.509698) (xy 122.449211 128.563223) - (xy 122.449208 128.563225) (xy 122.294864 128.641866) (xy 122.154723 128.743685) (xy 122.032235 128.866173) - (xy 121.930416 129.006314) (xy 121.851775 129.160658) (xy 121.851773 129.160661) (xy 121.798248 129.325393) - (xy 121.798247 129.325397) (xy 121.77115 129.496485) (xy 121.43215 129.496485) (xy 121.405052 129.325397) - (xy 121.405051 129.325393) (xy 121.351526 129.160661) (xy 121.351524 129.160658) (xy 121.351523 129.160657) - (xy 121.351523 129.160655) (xy 121.272882 129.006312) (xy 121.171064 128.866172) (xy 121.048578 128.743686) - (xy 120.908438 128.641868) (xy 120.908437 128.641867) (xy 120.908435 128.641866) (xy 120.754091 128.563225) - (xy 120.754088 128.563223) (xy 120.589356 128.509698) (xy 120.589352 128.509697) (xy 120.418264 128.4826) - (xy 120.418261 128.4826) (xy 120.245039 128.4826) (xy 120.245036 128.4826) (xy 120.073947 128.509697) - (xy 120.073943 128.509698) (xy 119.909211 128.563223) (xy 119.909208 128.563225) (xy 119.754864 128.641866) - (xy 119.614723 128.743685) (xy 119.492235 128.866173) (xy 119.390416 129.006314) (xy 119.311775 129.160658) - (xy 119.311773 129.160661) (xy 119.258248 129.325393) (xy 119.258247 129.325397) (xy 119.23115 129.496485) - (xy 118.89215 129.496485) (xy 118.865052 129.325397) (xy 118.865051 129.325393) (xy 118.811526 129.160661) - (xy 118.811524 129.160658) (xy 118.811523 129.160657) (xy 118.811523 129.160655) (xy 118.732882 129.006312) - (xy 118.631064 128.866172) (xy 118.508578 128.743686) (xy 118.368438 128.641868) (xy 118.368435 128.641866) - (xy 118.365291 128.639582) (xy 118.366089 128.638482) (xy 118.329838 128.596048) (xy 118.325031 128.535051) - (xy 118.351292 128.488149) (xy 124.58586 122.253581) (xy 124.585863 122.25358) (xy 124.66043 122.179013) - (xy 124.713157 122.087687) (xy 124.740451 121.985827) (xy 124.740451 121.880373) (xy 124.740451 121.874311) - (xy 124.74045 121.874293) (xy 124.74045 119.272599) (xy 124.759357 119.214408) (xy 124.808857 119.178444) - (xy 124.83945 119.173599) (xy 125.186511 119.173599) (xy 125.186514 119.173599) (xy 125.211641 119.170685) - (xy 125.22792 119.163496) (xy 125.288786 119.157286) (xy 125.337911 119.184054) (xy 125.799537 119.64568) - (xy 125.799539 119.645681) (xy 125.799541 119.645683) (xy 125.890858 119.698405) (xy 125.890856 119.698405) - (xy 125.89086 119.698406) (xy 125.890862 119.698407) (xy 125.992723 119.7257) (xy 125.992725 119.7257) - (xy 129.923375 119.7257) (xy 129.923377 119.7257) (xy 130.025238 119.698407) (xy 130.02524 119.698405) - (xy 130.025242 119.698405) (xy 130.116563 119.64568) (xy 130.297372 119.464869) (xy 130.351884 119.437094) - (xy 130.405258 119.443411) (xy 130.50078 119.482978) (xy 130.500785 119.482979) (xy 130.615638 119.498099) + (xy 100.466649 112.5731) (xy 98.666652 112.5731) (xy 98.666651 112.573101) (xy 98.666651 112.654682) + (xy 98.673058 112.725203) (xy 98.67306 112.725209) (xy 98.723629 112.887492) (xy 98.723632 112.8875) + (xy 98.800276 113.014283) (xy 98.8142 113.073863) (xy 98.790444 113.130249) (xy 98.738083 113.161902) + (xy 98.715554 113.1645) (xy 98.274921 113.1645) (xy 98.182855 113.202634) (xy 95.716884 115.668604) + (xy 95.662367 115.696381) (xy 95.64688 115.6976) (xy 95.156014 115.6976) (xy 95.11222 115.70398) + (xy 95.083023 115.708234) (xy 94.97044 115.763273) (xy 94.881823 115.85189) (xy 94.826784 115.964473) + (xy 94.826784 115.964475) (xy 94.81615 116.037464) (xy 94.81615 116.608736) (xy 94.822512 116.6524) + (xy 94.826784 116.681726) (xy 94.868873 116.767819) (xy 94.877444 116.828402) (xy 94.848769 116.882451) + (xy 94.7938 116.909324) (xy 94.779932 116.9103) (xy 93.98078 116.9103) (xy 93.922589 116.891393) + (xy 93.886625 116.841893) (xy 93.886625 116.780707) (xy 93.886805 116.78016) (xy 93.906506 116.720703) + (xy 93.91665 116.621423) (xy 93.91665 116.573101) (xy 93.916649 116.5731) (xy 93.06565 116.5731) + (xy 93.007459 116.554193) (xy 92.971495 116.504693) (xy 92.96665 116.4741) (xy 92.96665 116.323101) + (xy 92.966649 116.3231) (xy 92.81565 116.3231) (xy 92.757459 116.304193) (xy 92.721495 116.254693) + (xy 92.71665 116.2241) (xy 92.71665 115.418368) (xy 92.719118 115.41077) (xy 92.717869 115.402881) + (xy 92.728393 115.382225) (xy 92.735557 115.360177) (xy 92.74564 115.34837) (xy 92.745909 115.348101) + (xy 93.21665 115.348101) (xy 93.21665 116.073099) (xy 93.216651 116.0731) (xy 93.916648 116.0731) + (xy 93.916649 116.073099) (xy 93.916649 116.024777) (xy 93.906507 115.925502) (xy 93.906504 115.92549) + (xy 93.853195 115.764612) (xy 93.764224 115.62037) (xy 93.644379 115.500525) (xy 93.500137 115.411554) + (xy 93.339253 115.358243) (xy 93.239973 115.3481) (xy 93.216651 115.3481) (xy 93.21665 115.348101) + (xy 92.745909 115.348101) (xy 93.279014 114.814997) (xy 93.31715 114.722928) (xy 93.31715 114.623273) + (xy 93.31715 113.4804) (xy 93.336057 113.422209) (xy 93.385557 113.386245) (xy 93.41615 113.3814) + (xy 97.158679 113.3814) (xy 97.231346 113.3513) (xy 97.250747 113.343264) (xy 97.616413 112.977596) + (xy 97.67093 112.949819) (xy 97.686417 112.9486) (xy 98.149907 112.9486) (xy 98.14991 112.9486) + (xy 98.218043 112.938673) (xy 98.323133 112.887298) (xy 98.405848 112.804583) (xy 98.457223 112.699493) + (xy 98.46715 112.63136) (xy 98.46715 112.01484) (xy 98.463752 111.991518) (xy 98.66665 111.991518) + (xy 98.66665 112.073099) (xy 98.666651 112.0731) (xy 99.316649 112.0731) (xy 99.31665 112.073099) + (xy 99.31665 111.348101) (xy 99.81665 111.348101) (xy 99.81665 112.073099) (xy 99.816651 112.0731) + (xy 100.466648 112.0731) (xy 100.466649 112.073099) (xy 100.466649 111.991533) (xy 100.466648 111.991517) + (xy 100.460241 111.920996) (xy 100.460239 111.92099) (xy 100.40967 111.758707) (xy 100.409667 111.758699) + (xy 100.321725 111.613227) (xy 100.201522 111.493024) (xy 100.05605 111.405082) (xy 100.056042 111.405079) + (xy 99.89376 111.35451) (xy 99.893754 111.354508) (xy 99.823231 111.3481) (xy 99.816651 111.3481) + (xy 99.81665 111.348101) (xy 99.31665 111.348101) (xy 99.316648 111.348099) (xy 99.310075 111.3481) + (xy 99.239546 111.354508) (xy 99.23954 111.35451) (xy 99.077257 111.405079) (xy 99.077249 111.405082) + (xy 98.931777 111.493024) (xy 98.811574 111.613227) (xy 98.723632 111.758699) (xy 98.723629 111.758707) + (xy 98.67306 111.920989) (xy 98.673058 111.920995) (xy 98.66665 111.991518) (xy 98.463752 111.991518) + (xy 98.457223 111.946707) (xy 98.457221 111.946703) (xy 98.430422 111.891884) (xy 98.405848 111.841617) + (xy 98.323133 111.758902) (xy 98.303492 111.7493) (xy 98.218045 111.707527) (xy 98.183053 111.702429) + (xy 98.14991 111.6976) (xy 97.68339 111.6976) (xy 97.650247 111.702429) (xy 97.615254 111.707527) + (xy 97.510168 111.758901) (xy 97.427451 111.841618) (xy 97.376077 111.946704) (xy 97.373488 111.964473) + (xy 97.366151 112.014837) (xy 97.36615 112.014843) (xy 97.36615 112.478331) (xy 97.363681 112.485928) + (xy 97.364931 112.493818) (xy 97.354406 112.514473) (xy 97.347243 112.536522) (xy 97.337154 112.548335) + (xy 97.297023 112.588466) (xy 97.242506 112.616243) (xy 97.182074 112.606672) (xy 97.157015 112.588466) + (xy 97.141649 112.5731) (xy 96.491651 112.5731) (xy 96.49165 112.573101) (xy 96.49165 112.7814) + (xy 96.472743 112.839591) (xy 96.423243 112.875555) (xy 96.39265 112.8804) (xy 96.09065 112.8804) + (xy 96.032459 112.861493) (xy 95.996495 112.811993) (xy 95.99165 112.7814) (xy 95.99165 112.573101) + (xy 95.991649 112.5731) (xy 95.341652 112.5731) (xy 95.341651 112.573101) (xy 95.341651 112.654682) + (xy 95.348058 112.725203) (xy 95.34806 112.725209) (xy 95.356392 112.751947) (xy 95.35603 112.781893) + (xy 95.35603 112.811993) (xy 95.35566 112.812501) (xy 95.355653 112.813128) (xy 95.337733 112.837176) + (xy 95.320066 112.861493) (xy 95.319468 112.861687) (xy 95.319094 112.86219) (xy 95.261875 112.8804) + (xy 95.202379 112.8804) (xy 95.144188 112.861493) (xy 95.108224 112.811993) (xy 95.108224 112.750807) + (xy 95.113438 112.73792) (xy 95.132222 112.699495) (xy 95.132221 112.699495) (xy 95.132223 112.699493) + (xy 95.14215 112.63136) (xy 95.14215 112.01484) (xy 95.138752 111.991518) (xy 95.34165 111.991518) + (xy 95.34165 112.073099) (xy 95.341651 112.0731) (xy 95.991649 112.0731) (xy 95.99165 112.073099) + (xy 95.99165 111.348101) (xy 96.49165 111.348101) (xy 96.49165 112.073099) (xy 96.491651 112.0731) + (xy 97.141648 112.0731) (xy 97.141649 112.073099) (xy 97.141649 111.991533) (xy 97.141648 111.991517) + (xy 97.135241 111.920996) (xy 97.135239 111.92099) (xy 97.08467 111.758707) (xy 97.084667 111.758699) + (xy 96.996725 111.613227) (xy 96.876522 111.493024) (xy 96.73105 111.405082) (xy 96.731042 111.405079) + (xy 96.56876 111.35451) (xy 96.568754 111.354508) (xy 96.498231 111.3481) (xy 96.491651 111.3481) + (xy 96.49165 111.348101) (xy 95.99165 111.348101) (xy 95.991648 111.348099) (xy 95.985075 111.3481) + (xy 95.914546 111.354508) (xy 95.91454 111.35451) (xy 95.752257 111.405079) (xy 95.752249 111.405082) + (xy 95.606777 111.493024) (xy 95.486574 111.613227) (xy 95.398632 111.758699) (xy 95.398629 111.758707) + (xy 95.34806 111.920989) (xy 95.348058 111.920995) (xy 95.34165 111.991518) (xy 95.138752 111.991518) + (xy 95.132223 111.946707) (xy 95.132162 111.946582) (xy 95.130907 111.944013) (xy 95.12085 111.900538) + (xy 95.12085 105.526671) (xy 95.082715 105.434605) (xy 95.082714 105.434604) (xy 95.082714 105.434603) + (xy 95.012247 105.364136) (xy 95.012245 105.364135) (xy 94.308847 104.660736) (xy 94.308845 104.660735) + (xy 94.308844 104.660734) (xy 94.216779 104.6226) (xy 94.216778 104.6226) (xy 92.752772 104.6226) + (xy 92.694581 104.603693) (xy 92.662207 104.563587) (xy 92.656356 104.550336) (xy 92.656356 104.550335) + (xy 92.576915 104.470894) (xy 92.474141 104.425515) (xy 92.47414 104.425514) (xy 92.474138 104.425514) + (xy 92.449019 104.4226) (xy 92.449015 104.4226) (xy 91.855119 104.4226) (xy 91.796928 104.403693) + (xy 91.785115 104.393604) (xy 91.576246 104.184735) (xy 91.548469 104.130218) (xy 91.54725 104.114731) + (xy 91.54725 104.000192) (xy 91.54395 103.987875) (xy 91.516549 103.885614) (xy 91.516547 103.885611) + (xy 91.516547 103.885609) (xy 91.457242 103.782891) (xy 91.45724 103.782889) (xy 91.457239 103.782887) + (xy 91.373363 103.699011) (xy 91.37336 103.699009) (xy 91.373358 103.699007) (xy 91.270639 103.639702) + (xy 91.27064 103.639702) (xy 91.257101 103.636074) (xy 91.156059 103.609) (xy 91.037441 103.609) + (xy 90.967317 103.627789) (xy 90.922859 103.639702) (xy 90.820141 103.699007) (xy 90.736257 103.782891) + (xy 90.676952 103.885609) (xy 90.666903 103.923112) (xy 90.64625 104.000191) (xy 90.64625 104.118809) + (xy 90.663915 104.184735) (xy 90.676952 104.23339) (xy 90.736257 104.336108) (xy 90.736259 104.33611) + (xy 90.736261 104.336113) (xy 90.820137 104.419989) (xy 90.820139 104.41999) (xy 90.820141 104.419992) + (xy 90.913993 104.474178) (xy 90.954934 104.519647) (xy 90.96133 104.580498) (xy 90.955058 104.599901) + (xy 90.931565 104.653108) (xy 90.931564 104.653111) (xy 90.92865 104.67823) (xy 90.92865 105.06796) + (xy 90.928651 105.067963) (xy 90.931564 105.09309) (xy 90.946162 105.12615) (xy 90.976944 105.195865) + (xy 91.056385 105.275306) (xy 91.159159 105.320685) (xy 91.184285 105.3236) (xy 92.449014 105.323599) + (xy 92.474141 105.320685) (xy 92.576915 105.275306) (xy 92.656356 105.195865) (xy 92.662207 105.182612) + (xy 92.703007 105.137017) (xy 92.752772 105.1236) (xy 94.022181 105.1236) (xy 94.029778 105.126068) + (xy 94.037668 105.124819) (xy 94.058323 105.135343) (xy 94.080372 105.142507) (xy 94.092185 105.152596) + (xy 94.143185 105.203596) (xy 94.170962 105.258113) (xy 94.161391 105.318545) (xy 94.118126 105.36181) + (xy 94.073181 105.3726) (xy 93.059289 105.3726) (xy 93.059286 105.372601) (xy 93.034159 105.375514) + (xy 92.931385 105.420894) (xy 92.851944 105.500335) (xy 92.806564 105.603111) (xy 92.80365 105.62823) + (xy 92.80365 105.931386) (xy 92.784743 105.989577) (xy 92.735243 106.025541) (xy 92.674057 106.025541) + (xy 92.665341 106.022248) (xy 92.664347 106.021818) (xy 92.506639 105.975999) (xy 92.469787 105.9731) + (xy 92.066651 105.9731) (xy 92.06665 105.973101) (xy 92.06665 106.523099) (xy 92.066651 106.5231) + (xy 93.051445 106.5231) (xy 93.05125 106.520613) (xy 93.051248 106.520606) (xy 93.016273 106.400219) + (xy 93.018195 106.339064) (xy 93.055696 106.290718) (xy 93.111339 106.273599) (xy 93.34215 106.273599) + (xy 93.357062 106.278444) (xy 93.372743 106.278444) (xy 93.385428 106.28766) (xy 93.400341 106.292506) + (xy 93.409557 106.305191) (xy 93.422243 106.314408) (xy 93.427088 106.32932) (xy 93.436305 106.342006) + (xy 93.44115 106.372599) (xy 93.44115 106.489831) (xy 93.422243 106.548022) (xy 93.412154 106.559835) + (xy 92.977885 106.994104) (xy 92.923368 107.021881) (xy 92.907881 107.0231) (xy 92.066651 107.0231) + (xy 92.06665 107.023101) (xy 92.06665 107.573099) (xy 92.066651 107.5731) (xy 92.159881 107.5731) + (xy 92.218072 107.592007) (xy 92.254036 107.641507) (xy 92.254036 107.702693) (xy 92.229885 107.742102) + (xy 90.521953 109.450035) (xy 90.521953 109.450036) (xy 90.521952 109.450035) (xy 90.451485 109.520503) + (xy 90.41335 109.612571) (xy 90.41335 116.883428) (xy 90.451485 116.975496) (xy 90.451486 116.975497) + (xy 90.778685 117.302695) (xy 90.778686 117.302697) (xy 90.849153 117.373164) (xy 90.88729 117.38896) + (xy 90.912095 117.399235) (xy 90.94122 117.4113) (xy 90.941223 117.411301) (xy 90.941226 117.411301) + (xy 91.052401 117.411301) (xy 91.052409 117.4113) (xy 98.466279 117.4113) (xy 98.523925 117.387422) + (xy 98.558347 117.373164) (xy 98.760327 117.171181) (xy 98.814841 117.143405) (xy 98.875272 117.152975) + (xy 98.887052 117.158978) (xy 98.949635 117.168889) (xy 98.979371 117.1736) (xy 98.979374 117.1736) + (xy 99.528929 117.1736) (xy 99.558664 117.168889) (xy 99.621248 117.158978) (xy 99.633019 117.152979) + (xy 99.693451 117.143405) (xy 99.747969 117.17118) (xy 99.747973 117.171183) (xy 100.046085 117.469295) + (xy 100.046086 117.469297) (xy 100.116553 117.539764) (xy 100.15469 117.55556) (xy 100.182964 117.567272) + (xy 100.20862 117.5779) (xy 100.208623 117.577901) (xy 100.208626 117.577901) (xy 100.319801 117.577901) + (xy 100.319809 117.5779) (xy 106.800179 117.5779) (xy 106.858235 117.553851) (xy 106.892247 117.539764) + (xy 110.844114 113.587895) (xy 110.898631 113.560119) (xy 110.914118 113.5589) (xy 111.028657 113.5589) + (xy 111.028659 113.5589) (xy 111.143236 113.528199) (xy 111.143238 113.528197) (xy 111.14324 113.528197) + (xy 111.245958 113.468892) (xy 111.245958 113.468891) (xy 111.245963 113.468889) (xy 111.329839 113.385013) + (xy 111.344532 113.359564) (xy 111.389147 113.28229) (xy 111.389147 113.282288) (xy 111.389149 113.282286) + (xy 111.41985 113.167709) (xy 111.41985 113.049091) (xy 111.41985 113.0476) (xy 111.438757 112.989409) + (xy 111.488257 112.953445) (xy 111.51885 112.9486) (xy 111.974907 112.9486) (xy 111.97491 112.9486) + (xy 112.043043 112.938673) (xy 112.148133 112.887298) (xy 112.230848 112.804583) (xy 112.282223 112.699493) + (xy 112.286805 112.668047) (xy 112.288222 112.658325) (xy 112.315322 112.603469) (xy 112.36949 112.575018) + (xy 112.386187 112.5736) (xy 113.447113 112.5736) (xy 113.505304 112.592507) (xy 113.541268 112.642007) + (xy 113.545078 112.658325) (xy 113.551076 112.699492) (xy 113.591561 112.782305) (xy 113.602452 112.804583) + (xy 113.685167 112.887298) (xy 113.738935 112.913583) (xy 113.790254 112.938672) (xy 113.790255 112.938672) + (xy 113.790257 112.938673) (xy 113.85839 112.9486) (xy 113.858393 112.9486) (xy 114.321882 112.9486) + (xy 114.380073 112.967507) (xy 114.391885 112.977596) (xy 114.651339 113.237049) (xy 114.651342 113.237053) + (xy 114.651343 113.237053) (xy 114.656985 113.242695) (xy 114.656986 113.242697) (xy 114.727453 113.313164) + (xy 114.727454 113.313164) (xy 114.727455 113.313165) (xy 114.819521 113.3513) (xy 114.819522 113.3513) + (xy 123.363779 113.3513) (xy 123.409812 113.332232) (xy 123.455847 113.313164) (xy 123.791413 112.977596) + (xy 123.84593 112.949819) (xy 123.861417 112.9486) (xy 124.11438 112.9486) (xy 124.172571 112.967507) + (xy 124.208535 113.017007) (xy 124.208535 113.078193) (xy 124.184384 113.117604) (xy 123.349753 113.952236) + (xy 123.349752 113.952235) (xy 123.279285 114.022703) (xy 123.24115 114.114771) (xy 123.24115 117.541066) + (xy 123.222243 117.599257) (xy 123.190137 117.624569) (xy 123.191036 117.625915) (xy 123.133148 117.664594) + (xy 123.133144 117.664598) (xy 123.099884 117.714375) (xy 123.099882 117.714379) (xy 123.09115 117.758272) + (xy 123.09115 118.087927) (xy 123.099882 118.13182) (xy 123.099884 118.131824) (xy 123.112142 118.150169) + (xy 123.133146 118.181604) (xy 123.182928 118.214867) (xy 123.193686 118.217007) (xy 123.226822 118.223599) + (xy 123.226828 118.223599) (xy 123.22683 118.2236) (xy 123.496181 118.2236) (xy 123.518228 118.230763) + (xy 123.541126 118.23439) (xy 123.546774 118.240038) (xy 123.554372 118.242507) (xy 123.567999 118.261263) + (xy 123.584391 118.277655) (xy 123.58564 118.285544) (xy 123.590336 118.292007) (xy 123.590336 118.315192) + (xy 123.593962 118.338087) (xy 123.590336 118.345203) (xy 123.590336 118.353193) (xy 123.566185 118.392604) + (xy 123.565185 118.393604) (xy 123.510668 118.421381) (xy 123.495181 118.4226) (xy 123.226822 118.4226) + (xy 123.182929 118.431332) (xy 123.182925 118.431334) (xy 123.133148 118.464594) (xy 123.133144 118.464598) + (xy 123.099884 118.514375) (xy 123.099882 118.514379) (xy 123.09115 118.558272) (xy 123.09115 118.887927) + (xy 123.099882 118.93182) (xy 123.099884 118.931824) (xy 123.111094 118.948601) (xy 123.133146 118.981604) + (xy 123.182928 119.014867) (xy 123.190449 119.016363) (xy 123.226822 119.023599) (xy 123.226828 119.023599) + (xy 123.22683 119.0236) (xy 123.226831 119.0236) (xy 123.756469 119.0236) (xy 123.75647 119.0236) + (xy 123.756471 119.023599) (xy 123.756477 119.023599) (xy 123.778273 119.019262) (xy 123.800372 119.014867) + (xy 123.850154 118.981604) (xy 123.883417 118.931822) (xy 123.889834 118.899565) (xy 123.8931 118.883148) + (xy 123.894855 118.883497) (xy 123.916444 118.834137) (xy 123.969229 118.803195) (xy 124.03012 118.80919) + (xy 124.075858 118.84983) (xy 124.08945 118.899894) (xy 124.08945 121.788331) (xy 124.070543 121.846522) + (xy 124.060454 121.858334) (xy 117.649753 128.269035) (xy 117.649753 128.269036) (xy 117.649752 128.269035) + (xy 117.579285 128.339503) (xy 117.54115 128.431571) (xy 117.54115 128.591896) (xy 117.522243 128.650087) + (xy 117.480036 128.68336) (xy 117.34142 128.740777) (xy 117.341411 128.740781) (xy 117.185742 128.844798) + (xy 117.185738 128.844801) (xy 117.053351 128.977188) (xy 117.053348 128.977192) (xy 116.949331 129.132861) + (xy 116.949327 129.13287) (xy 116.877676 129.30585) (xy 116.84115 129.489481) (xy 116.84115 129.676718) + (xy 116.877676 129.860349) (xy 116.949327 130.033329) (xy 116.949331 130.033338) (xy 117.023715 130.144659) + (xy 117.053348 130.189008) (xy 117.185742 130.321402) (xy 117.252113 130.365749) (xy 117.341411 130.425418) + (xy 117.341417 130.42542) (xy 117.341419 130.425422) (xy 117.514399 130.497073) (xy 117.698034 130.5336) + (xy 117.698035 130.5336) (xy 117.885265 130.5336) (xy 117.885266 130.5336) (xy 118.068901 130.497073) + (xy 118.241881 130.425422) (xy 118.241884 130.425419) (xy 118.241888 130.425418) (xy 118.286837 130.395382) + (xy 118.397558 130.321402) (xy 118.529952 130.189008) (xy 118.629525 130.039987) (xy 118.633968 130.033338) + (xy 118.633969 130.033334) (xy 118.633972 130.033331) (xy 118.705623 129.860351) (xy 118.74215 129.676716) + (xy 118.74215 129.489484) (xy 118.742149 129.489481) (xy 119.38115 129.489481) (xy 119.38115 129.676718) + (xy 119.417676 129.860349) (xy 119.489327 130.033329) (xy 119.489331 130.033338) (xy 119.563715 130.144659) + (xy 119.593348 130.189008) (xy 119.725742 130.321402) (xy 119.792113 130.365749) (xy 119.881411 130.425418) + (xy 119.881417 130.42542) (xy 119.881419 130.425422) (xy 120.054399 130.497073) (xy 120.238034 130.5336) + (xy 120.238035 130.5336) (xy 120.425265 130.5336) (xy 120.425266 130.5336) (xy 120.608901 130.497073) + (xy 120.781881 130.425422) (xy 120.781884 130.425419) (xy 120.781888 130.425418) (xy 120.826837 130.395382) + (xy 120.937558 130.321402) (xy 121.069952 130.189008) (xy 121.169525 130.039987) (xy 121.173968 130.033338) + (xy 121.173969 130.033334) (xy 121.173972 130.033331) (xy 121.245623 129.860351) (xy 121.28215 129.676716) + (xy 121.28215 129.489484) (xy 121.282149 129.489481) (xy 121.92115 129.489481) (xy 121.92115 129.676718) + (xy 121.957676 129.860349) (xy 122.029327 130.033329) (xy 122.029331 130.033338) (xy 122.103715 130.144659) + (xy 122.133348 130.189008) (xy 122.265742 130.321402) (xy 122.332113 130.365749) (xy 122.421411 130.425418) + (xy 122.421417 130.42542) (xy 122.421419 130.425422) (xy 122.594399 130.497073) (xy 122.778034 130.5336) + (xy 122.778035 130.5336) (xy 122.965265 130.5336) (xy 122.965266 130.5336) (xy 123.148901 130.497073) + (xy 123.321881 130.425422) (xy 123.321884 130.425419) (xy 123.321888 130.425418) (xy 123.366837 130.395382) + (xy 123.477558 130.321402) (xy 123.609952 130.189008) (xy 123.709525 130.039987) (xy 123.713968 130.033338) + (xy 123.713969 130.033334) (xy 123.713972 130.033331) (xy 123.785623 129.860351) (xy 123.82215 129.676716) + (xy 123.82215 129.489484) (xy 123.785623 129.305849) (xy 123.713972 129.132869) (xy 123.71397 129.132867) + (xy 123.713968 129.132861) (xy 123.64156 129.024497) (xy 123.609952 128.977192) (xy 123.477558 128.844798) + (xy 123.433209 128.815165) (xy 123.321888 128.740781) (xy 123.321879 128.740777) (xy 123.148899 128.669126) + (xy 122.965268 128.6326) (xy 122.965266 128.6326) (xy 122.778034 128.6326) (xy 122.778031 128.6326) + (xy 122.5944 128.669126) (xy 122.42142 128.740777) (xy 122.421411 128.740781) (xy 122.265742 128.844798) + (xy 122.265738 128.844801) (xy 122.133351 128.977188) (xy 122.133348 128.977192) (xy 122.029331 129.132861) + (xy 122.029327 129.13287) (xy 121.957676 129.30585) (xy 121.92115 129.489481) (xy 121.282149 129.489481) + (xy 121.245623 129.305849) (xy 121.173972 129.132869) (xy 121.17397 129.132867) (xy 121.173968 129.132861) + (xy 121.10156 129.024497) (xy 121.069952 128.977192) (xy 120.937558 128.844798) (xy 120.893209 128.815165) + (xy 120.781888 128.740781) (xy 120.781879 128.740777) (xy 120.608899 128.669126) (xy 120.425268 128.6326) + (xy 120.425266 128.6326) (xy 120.238034 128.6326) (xy 120.238031 128.6326) (xy 120.0544 128.669126) + (xy 119.88142 128.740777) (xy 119.881411 128.740781) (xy 119.725742 128.844798) (xy 119.725738 128.844801) + (xy 119.593351 128.977188) (xy 119.593348 128.977192) (xy 119.489331 129.132861) (xy 119.489327 129.13287) + (xy 119.417676 129.30585) (xy 119.38115 129.489481) (xy 118.742149 129.489481) (xy 118.705623 129.305849) + (xy 118.633972 129.132869) (xy 118.63397 129.132867) (xy 118.633968 129.132861) (xy 118.56156 129.024497) + (xy 118.529952 128.977192) (xy 118.397558 128.844798) (xy 118.353209 128.815165) (xy 118.241888 128.740781) + (xy 118.241879 128.740777) (xy 118.127497 128.693398) (xy 118.080971 128.653661) (xy 118.066688 128.594166) + (xy 118.090103 128.537638) (xy 118.095366 128.531943) (xy 124.481845 122.145464) (xy 124.481847 122.145464) + (xy 124.552314 122.074997) (xy 124.588273 121.988184) (xy 124.590451 121.982927) (xy 124.590451 121.883272) + (xy 124.59045 121.883269) (xy 124.59045 119.1226) (xy 124.609357 119.064409) (xy 124.658857 119.028445) + (xy 124.68945 119.0236) (xy 125.156469 119.0236) (xy 125.15647 119.0236) (xy 125.156471 119.023599) + (xy 125.156477 119.023599) (xy 125.178273 119.019262) (xy 125.200372 119.014867) (xy 125.237162 118.990285) + (xy 125.292164 118.9736) (xy 125.298581 118.9736) (xy 125.356772 118.992507) (xy 125.368585 119.002596) + (xy 125.833086 119.467097) (xy 125.833085 119.467097) (xy 125.903553 119.537564) (xy 125.995621 119.5757) + (xy 125.995622 119.5757) (xy 129.920479 119.5757) (xy 129.966512 119.556632) (xy 130.012547 119.537564) + (xy 130.165467 119.384642) (xy 130.219979 119.356867) (xy 130.280411 119.366438) (xy 130.295735 119.376106) + (xy 130.357867 119.423782) (xy 130.500777 119.482977) (xy 130.500785 119.482979) (xy 130.615638 119.498099) (xy 130.72915 119.498099) (xy 130.72915 118.998101) (xy 131.07915 118.998101) (xy 131.07915 119.498098) (xy 131.079151 119.498099) (xy 131.192658 119.498099) (xy 131.192663 119.498098) (xy 131.307516 119.482979) (xy 131.307517 119.482978) (xy 131.450432 119.423782) (xy 131.573157 119.329611) (xy 131.573161 119.329607) (xy 131.667332 119.206882) (xy 131.726528 119.063968) (xy 131.726529 119.063968) (xy 131.735201 118.9981) (xy 131.079151 118.9981) (xy 131.07915 118.998101) (xy 130.72915 118.998101) (xy 130.72915 118.9221) - (xy 130.748057 118.863909) (xy 130.797557 118.827945) (xy 130.82815 118.8231) (xy 130.908476 118.8231) - (xy 130.954171 118.799818) (xy 130.969653 118.798599) (xy 131.184682 118.798599) (xy 131.184684 118.798599) - (xy 131.204193 118.795508) (xy 131.275543 118.784209) (xy 131.385053 118.728411) (xy 131.410426 118.703036) - (xy 131.441083 118.682195) (xy 131.447763 118.679301) (xy 131.470138 118.673307) (xy 131.495754 118.658517) - (xy 131.50098 118.656254) (xy 131.514776 118.654945) (xy 131.540325 118.6481) (xy 131.7352 118.6481) - (xy 131.7352 118.648099) (xy 131.726528 118.582232) (xy 131.714728 118.553742) (xy 131.709927 118.492746) - (xy 131.736185 118.445857) (xy 132.46213 117.719913) (xy 132.462133 117.719908) (xy 132.514855 117.628592) - (xy 132.514855 117.62859) (xy 132.514857 117.628588) (xy 132.54215 117.526727) (xy 132.54215 117.421273) - (xy 132.54215 113.6467) (xy 132.561057 113.588509) (xy 132.610557 113.552545) (xy 132.64115 113.5477) - (xy 135.370275 113.5477) (xy 135.370277 113.5477) (xy 135.472138 113.520407) (xy 135.47214 113.520405) - (xy 135.472142 113.520405) (xy 135.563458 113.467683) (xy 135.563458 113.467682) (xy 135.563463 113.46768) - (xy 135.818057 113.213086) (xy 135.903548 113.127596) (xy 135.958064 113.099819) (xy 135.973551 113.0986) - (xy 136.407792 113.0986) (xy 136.407794 113.0986) (xy 136.49224 113.088459) (xy 136.626625 113.035464) - (xy 136.726037 112.960077) (xy 136.783828 112.939981) (xy 136.842394 112.957692) (xy 136.870117 112.986987) - (xy 136.894076 113.025829) (xy 136.894076 113.02583) (xy 137.01392 113.145674) (xy 137.158162 113.234645) - (xy 137.319046 113.287956) (xy 137.418326 113.298099) (xy 137.44165 113.298098) (xy 137.44165 112.573101) - (xy 137.94165 112.573101) (xy 137.94165 113.298098) (xy 137.941651 113.298099) (xy 137.964972 113.298099) - (xy 138.064247 113.287957) (xy 138.064259 113.287954) (xy 138.225137 113.234645) (xy 138.369379 113.145674) - (xy 138.489224 113.025829) (xy 138.578195 112.881587) (xy 138.631506 112.720703) (xy 138.64165 112.621423) - (xy 138.64165 112.573101) (xy 138.641649 112.5731) (xy 137.941651 112.5731) (xy 137.94165 112.573101) - (xy 137.44165 112.573101) (xy 137.44165 111.348101) (xy 137.94165 111.348101) (xy 137.94165 112.073099) - (xy 137.941651 112.0731) (xy 138.641648 112.0731) (xy 138.641649 112.073099) (xy 138.641649 112.024777) - (xy 138.631507 111.925502) (xy 138.631504 111.92549) (xy 138.578195 111.764612) (xy 138.489224 111.62037) - (xy 138.369379 111.500525) (xy 138.225137 111.411554) (xy 138.064253 111.358243) (xy 137.964973 111.3481) - (xy 137.941651 111.3481) (xy 137.94165 111.348101) (xy 137.44165 111.348101) (xy 137.44165 111.3481) - (xy 137.441649 111.348099) (xy 137.418339 111.3481) (xy 137.418334 111.348101) (xy 137.319051 111.358242) - (xy 137.31904 111.358245) (xy 137.158162 111.411554) (xy 137.01392 111.500525) (xy 136.894076 111.620369) - (xy 136.870115 111.659214) (xy 136.823472 111.698814) (xy 136.762462 111.703435) (xy 136.726038 111.686124) - (xy 136.626625 111.610736) (xy 136.626622 111.610734) (xy 136.492241 111.557741) (xy 136.407798 111.5476) - (xy 136.407794 111.5476) (xy 135.875506 111.5476) (xy 135.875501 111.5476) (xy 135.791058 111.557741) - (xy 135.656677 111.610734) (xy 135.541572 111.698022) (xy 135.454284 111.813127) (xy 135.401291 111.947508) - (xy 135.39115 112.031951) (xy 135.39115 112.466199) (xy 135.372243 112.52439) (xy 135.362154 112.536203) - (xy 135.180653 112.717704) (xy 135.126136 112.745481) (xy 135.110649 112.7467) (xy 134.73848 112.7467) - (xy 134.680289 112.727793) (xy 134.644325 112.678293) (xy 134.639993 112.637636) (xy 134.64165 112.62142) - (xy 134.64165 112.573101) (xy 134.641649 112.5731) (xy 133.79065 112.5731) (xy 133.732459 112.554193) - (xy 133.696495 112.504693) (xy 133.69165 112.4741) (xy 133.69165 112.323101) (xy 133.691649 112.3231) - (xy 133.54065 112.3231) (xy 133.482459 112.304193) (xy 133.446495 112.254693) (xy 133.44165 112.2241) + (xy 130.748057 118.863909) (xy 130.797557 118.827945) (xy 130.82815 118.8231) (xy 130.904149 118.8231) + (xy 130.90415 118.823099) (xy 130.90415 118.7476) (xy 130.908955 118.73281) (xy 130.908913 118.717263) + (xy 130.91817 118.704447) (xy 130.923057 118.689409) (xy 130.935636 118.680269) (xy 130.944742 118.667665) + (xy 130.959709 118.662779) (xy 130.972557 118.653445) (xy 131.002882 118.6486) (xy 131.177592 118.6486) + (xy 131.180006 118.648119) (xy 131.187265 118.6481) (xy 131.1873 118.648111) (xy 131.187533 118.6481) + (xy 131.735199 118.6481) (xy 131.733694 118.636665) (xy 131.744844 118.576504) (xy 131.789226 118.534386) + (xy 131.793962 118.532278) (xy 131.841795 118.512465) (xy 131.841795 118.512464) (xy 131.841797 118.512464) + (xy 131.941895 118.412364) (xy 131.941897 118.412364) (xy 132.012364 118.341897) (xy 132.026467 118.30785) + (xy 132.050501 118.249828) (xy 132.050501 118.150172) (xy 132.050501 118.142198) (xy 132.0505 118.142184) + (xy 132.0505 117.960418) (xy 132.069407 117.902227) (xy 132.07949 117.89042) (xy 132.354014 117.615897) + (xy 132.39215 117.523828) (xy 132.39215 117.424172) (xy 132.39215 113.4967) (xy 132.411057 113.438509) + (xy 132.460557 113.402545) (xy 132.49115 113.3977) (xy 135.367379 113.3977) (xy 135.413412 113.378632) + (xy 135.459447 113.359564) (xy 135.841413 112.977596) (xy 135.89593 112.949819) (xy 135.911417 112.9486) + (xy 136.402282 112.9486) (xy 136.402286 112.9486) (xy 136.475275 112.937966) (xy 136.587861 112.882926) + (xy 136.637876 112.83291) (xy 136.69239 112.805134) (xy 136.752822 112.814705) (xy 136.796087 112.857969) + (xy 136.801853 112.871775) (xy 136.805104 112.881587) (xy 136.894075 113.025829) (xy 137.01392 113.145674) + (xy 137.158162 113.234645) (xy 137.319046 113.287956) (xy 137.418326 113.298099) (xy 137.44165 113.298098) + (xy 137.44165 112.573101) (xy 137.94165 112.573101) (xy 137.94165 113.298098) (xy 137.941651 113.298099) + (xy 137.964972 113.298099) (xy 138.064247 113.287957) (xy 138.064259 113.287954) (xy 138.225137 113.234645) + (xy 138.369379 113.145674) (xy 138.489224 113.025829) (xy 138.578195 112.881587) (xy 138.631506 112.720703) + (xy 138.64165 112.621423) (xy 138.64165 112.573101) (xy 138.641649 112.5731) (xy 137.941651 112.5731) + (xy 137.94165 112.573101) (xy 137.44165 112.573101) (xy 137.44165 111.348101) (xy 137.94165 111.348101) + (xy 137.94165 112.073099) (xy 137.941651 112.0731) (xy 138.641648 112.0731) (xy 138.641649 112.073099) + (xy 138.641649 112.024777) (xy 138.631507 111.925502) (xy 138.631504 111.92549) (xy 138.578195 111.764612) + (xy 138.489224 111.62037) (xy 138.369379 111.500525) (xy 138.225137 111.411554) (xy 138.064253 111.358243) + (xy 137.964973 111.3481) (xy 137.941651 111.3481) (xy 137.94165 111.348101) (xy 137.44165 111.348101) + (xy 137.44165 111.3481) (xy 137.441649 111.348099) (xy 137.418339 111.3481) (xy 137.418334 111.348101) + (xy 137.319051 111.358242) (xy 137.31904 111.358245) (xy 137.158162 111.411554) (xy 137.01392 111.500525) + (xy 136.894075 111.62037) (xy 136.805103 111.764613) (xy 136.805103 111.764614) (xy 136.801852 111.774426) + (xy 136.7656 111.823715) (xy 136.7073 111.842282) (xy 136.64922 111.823035) (xy 136.637881 111.813294) + (xy 136.587861 111.763274) (xy 136.556613 111.747998) (xy 136.475275 111.708234) (xy 136.475276 111.708234) + (xy 136.450497 111.704624) (xy 136.402286 111.6976) (xy 135.881014 111.6976) (xy 135.83722 111.70398) + (xy 135.808023 111.708234) (xy 135.69544 111.763273) (xy 135.606823 111.85189) (xy 135.551784 111.964473) + (xy 135.548375 111.987872) (xy 135.542812 112.026061) (xy 135.54115 112.037467) (xy 135.54115 112.528331) + (xy 135.522243 112.586522) (xy 135.512154 112.598335) (xy 135.242785 112.867704) (xy 135.188268 112.895481) + (xy 135.172781 112.8967) (xy 134.710286 112.8967) (xy 134.652095 112.877793) (xy 134.616131 112.828293) + (xy 134.616131 112.767107) (xy 134.616311 112.766559) (xy 134.631506 112.720701) (xy 134.64165 112.621423) + (xy 134.64165 112.573101) (xy 134.641649 112.5731) (xy 133.941651 112.5731) (xy 133.94165 112.573101) + (xy 133.94165 112.7977) (xy 133.922743 112.855891) (xy 133.873243 112.891855) (xy 133.84265 112.8967) + (xy 133.54065 112.8967) (xy 133.482459 112.877793) (xy 133.446495 112.828293) (xy 133.44165 112.7977) (xy 133.44165 111.348101) (xy 133.94165 111.348101) (xy 133.94165 112.073099) (xy 133.941651 112.0731) (xy 134.641648 112.0731) (xy 134.641649 112.073099) (xy 134.641649 112.024777) (xy 134.631507 111.925502) (xy 134.631504 111.92549) (xy 134.578195 111.764612) (xy 134.489224 111.62037) (xy 134.369379 111.500525) (xy 134.225137 111.411554) (xy 134.064253 111.358243) (xy 133.964973 111.3481) (xy 133.941651 111.3481) (xy 133.94165 111.348101) (xy 133.44165 111.348101) (xy 133.44165 111.3481) (xy 133.441649 111.348099) (xy 133.418339 111.3481) (xy 133.418334 111.348101) (xy 133.319051 111.358242) (xy 133.31904 111.358245) - (xy 133.158162 111.411554) (xy 133.01392 111.500525) (xy 132.894077 111.620368) (xy 132.870117 111.659213) - (xy 132.854654 111.672341) (xy 132.842401 111.688503) (xy 132.831866 111.691689) (xy 132.823475 111.698814) - (xy 132.803247 111.700346) (xy 132.783836 111.706218) (xy 132.773441 111.702604) (xy 132.762464 111.703436) - (xy 132.726043 111.686127) (xy 132.723698 111.684349) (xy 132.688753 111.634125) (xy 132.690002 111.572953) - (xy 132.697773 111.555965) (xy 132.701227 111.549984) (xy 132.74215 111.397257) (xy 132.74215 111.239143) - (xy 132.701227 111.086416) (xy 132.62217 110.949484) (xy 132.510366 110.83768) (xy 132.373434 110.758623) - (xy 132.220707 110.7177) (xy 132.220705 110.7177) (xy 132.103969 110.7177) (xy 132.063992 110.706989) - (xy 132.063335 110.708577) (xy 132.057342 110.706094) (xy 132.045309 110.70287) (xy 131.955477 110.6788) - (xy 125.146177 110.6788) (xy 125.040723 110.6788) (xy 124.978379 110.695504) (xy 124.938857 110.706094) - (xy 124.847541 110.758816) (xy 124.847536 110.75882) (xy 124.08775 111.518604) (xy 124.033234 111.546381) - (xy 124.017748 111.5476) (xy 123.843781 111.5476) (xy 123.843779 111.5476) (xy 123.843778 111.547601) - (xy 123.836848 111.548346) (xy 123.784169 111.554008) (xy 123.784164 111.554009) (xy 123.64932 111.604302) - (xy 123.534108 111.69055) (xy 123.5341 111.690558) (xy 123.447852 111.80577) (xy 123.39756 111.940611) - (xy 123.397558 111.940622) (xy 123.391151 112.000218) (xy 123.39115 112.000227) (xy 123.39115 112.416199) - (xy 123.372243 112.47439) (xy 123.362154 112.486202) (xy 123.177054 112.671303) (xy 123.122537 112.699081) - (xy 123.10705 112.7003) (xy 120.74065 112.7003) (xy 120.682459 112.681393) (xy 120.646495 112.631893) - (xy 120.64165 112.6013) (xy 120.64165 112.573101) (xy 120.641649 112.5731) (xy 119.79065 112.5731) - (xy 119.732459 112.554193) (xy 119.696495 112.504693) (xy 119.69165 112.4741) (xy 119.69165 112.1721) - (xy 119.710557 112.113909) (xy 119.760057 112.077945) (xy 119.79065 112.0731) (xy 120.641648 112.0731) + (xy 133.158162 111.411554) (xy 133.01392 111.500525) (xy 132.894075 111.62037) (xy 132.805103 111.764613) + (xy 132.805103 111.764614) (xy 132.801852 111.774426) (xy 132.7656 111.823715) (xy 132.7073 111.842282) + (xy 132.64922 111.823035) (xy 132.648838 111.822753) (xy 132.64301 111.818423) (xy 132.587861 111.763274) + (xy 132.53206 111.735994) (xy 132.524717 111.730539) (xy 132.512036 111.712689) (xy 132.496302 111.697467) + (xy 132.494689 111.68827) (xy 132.489282 111.680659) (xy 132.489514 111.658766) (xy 132.485733 111.637201) + (xy 132.489848 111.627411) (xy 132.489933 111.619477) (xy 132.497421 111.609397) (xy 132.500741 111.601499) + (xy 132.498895 111.600433) (xy 132.561447 111.49209) (xy 132.561447 111.492088) (xy 132.561449 111.492086) + (xy 132.59215 111.377509) (xy 132.59215 111.258891) (xy 132.561449 111.144314) (xy 132.561447 111.144311) + (xy 132.561447 111.144309) (xy 132.502142 111.041591) (xy 132.50214 111.041589) (xy 132.502139 111.041587) + (xy 132.418263 110.957711) (xy 132.41826 110.957709) (xy 132.418258 110.957707) (xy 132.315539 110.898402) + (xy 132.31554 110.898402) (xy 132.302001 110.894774) (xy 132.200959 110.8677) (xy 132.082341 110.8677) + (xy 132.082333 110.8677) (xy 132.081428 110.867819) (xy 132.080524 110.8677) (xy 132.075852 110.8677) + (xy 132.075852 110.867084) (xy 132.030631 110.861129) (xy 131.95258 110.8288) (xy 131.952578 110.8288) + (xy 125.143278 110.8288) (xy 125.043622 110.8288) (xy 125.043621 110.8288) (xy 124.951555 110.866934) + (xy 124.149885 111.668604) (xy 124.095368 111.696381) (xy 124.079881 111.6976) (xy 123.85839 111.6976) + (xy 123.825247 111.702429) (xy 123.790254 111.707527) (xy 123.685168 111.758901) (xy 123.602451 111.841618) + (xy 123.551077 111.946704) (xy 123.548488 111.964473) (xy 123.541151 112.014837) (xy 123.54115 112.014843) + (xy 123.54115 112.478331) (xy 123.522243 112.536522) (xy 123.512154 112.548335) (xy 123.239185 112.821304) + (xy 123.184668 112.849081) (xy 123.169181 112.8503) (xy 120.725662 112.8503) (xy 120.667471 112.831393) + (xy 120.631507 112.781893) (xy 120.631507 112.726231) (xy 120.630375 112.725989) (xy 120.631506 112.720703) + (xy 120.64165 112.621423) (xy 120.64165 112.573101) (xy 120.641649 112.5731) (xy 119.941651 112.5731) + (xy 119.94165 112.573101) (xy 119.94165 112.7513) (xy 119.922743 112.809491) (xy 119.873243 112.845455) + (xy 119.84265 112.8503) (xy 119.54065 112.8503) (xy 119.482459 112.831393) (xy 119.446495 112.781893) + (xy 119.44165 112.7513) (xy 119.44165 111.418368) (xy 119.444118 111.41077) (xy 119.442869 111.402881) + (xy 119.453393 111.382225) (xy 119.460557 111.360177) (xy 119.470646 111.348364) (xy 119.470909 111.348101) + (xy 119.94165 111.348101) (xy 119.94165 112.073099) (xy 119.941651 112.0731) (xy 120.641648 112.0731) (xy 120.641649 112.073099) (xy 120.641649 112.024777) (xy 120.631507 111.925502) (xy 120.631504 111.92549) (xy 120.578195 111.764612) (xy 120.489224 111.62037) (xy 120.369379 111.500525) (xy 120.225137 111.411554) - (xy 120.064253 111.358243) (xy 119.964973 111.3481) (xy 119.92205 111.3481) (xy 119.863859 111.329193) - (xy 119.827895 111.279693) (xy 119.827895 111.218507) (xy 119.852044 111.179098) (xy 121.852447 109.178696) - (xy 121.906964 109.150919) (xy 121.922451 109.1497) (xy 163.909506 109.1497) (xy 163.967697 109.168607) - (xy 163.979509 109.178696) (xy 164.006778 109.205964) (xy 164.030534 109.22972) (xy 164.167466 109.308777) - (xy 164.320193 109.3497) (xy 164.320195 109.3497) (xy 164.478305 109.3497) (xy 164.478307 109.3497) - (xy 164.631034 109.308777) (xy 164.767966 109.22972) (xy 164.87977 109.117916) (xy 164.958827 108.980984) - (xy 164.99975 108.828257) (xy 164.99975 108.670143) (xy 164.978657 108.591422) (xy 164.98186 108.530321) - (xy 165.020365 108.482771) (xy 165.074284 108.4668) (xy 167.150214 108.4668) (xy 167.150215 108.4668) - (xy 167.35317 108.42643) (xy 167.544348 108.347241) (xy 167.565317 108.33323) (xy 167.716405 108.232277) - (xy 167.862727 108.085955) (xy 167.862728 108.085952) (xy 167.994737 107.953943) (xy 173.34645 107.953943) - (xy 173.34645 108.112057) (xy 173.387373 108.264784) (xy 173.46643 108.401716) (xy 173.578234 108.51352) - (xy 173.715166 108.592577) (xy 173.867893 108.6335) (xy 173.867895 108.6335) (xy 174.026005 108.6335) - (xy 174.026007 108.6335) (xy 174.178734 108.592577) (xy 174.315666 108.51352) (xy 174.42747 108.401716) - (xy 174.506527 108.264784) (xy 174.54745 108.112057) (xy 174.54745 107.953943) (xy 174.506527 107.801216) - (xy 174.42747 107.664284) (xy 174.315666 107.55248) (xy 174.178734 107.473423) (xy 174.026007 107.4325) - (xy 173.867893 107.4325) (xy 173.715166 107.473423) (xy 173.578234 107.55248) (xy 173.46643 107.664284) - (xy 173.387373 107.801216) (xy 173.34645 107.953943) (xy 167.994737 107.953943) (xy 168.601638 107.347043) - (xy 176.76865 107.347043) (xy 176.76865 107.505157) (xy 176.809573 107.657884) (xy 176.88863 107.794816) - (xy 177.000434 107.90662) (xy 177.137366 107.985677) (xy 177.290093 108.0266) (xy 177.290095 108.0266) - (xy 177.448205 108.0266) (xy 177.448207 108.0266) (xy 177.600934 107.985677) (xy 177.737866 107.90662) - (xy 177.84967 107.794816) (xy 177.854673 107.786149) (xy 177.90014 107.74521) (xy 177.96099 107.738813) - (xy 178.013979 107.769404) (xy 178.033167 107.801054) (xy 178.047852 107.840429) (xy 178.129341 107.949284) - (xy 178.134104 107.955646) (xy 178.134107 107.955648) (xy 178.134108 107.955649) (xy 178.24932 108.041897) - (xy 178.384161 108.092189) (xy 178.384162 108.092189) (xy 178.384167 108.092191) (xy 178.443777 108.0986) - (xy 178.859748 108.098599) (xy 178.917939 108.117506) (xy 178.929752 108.127595) (xy 180.54637 109.744213) - (xy 180.546369 109.744213) (xy 180.587075 109.784918) (xy 180.620937 109.81878) (xy 180.712263 109.871507) - (xy 180.814123 109.8988) (xy 180.919577 109.8988) (xy 180.984606 109.8988) (xy 181.042797 109.917707) - (xy 181.054609 109.927796) (xy 181.082236 109.955422) (xy 181.105634 109.97882) (xy 181.242566 110.057877) - (xy 181.395293 110.0988) (xy 181.395295 110.0988) (xy 181.553405 110.0988) (xy 181.553407 110.0988) - (xy 181.706134 110.057877) (xy 181.843066 109.97882) (xy 181.95487 109.867016) (xy 182.033927 109.730084) - (xy 182.07485 109.577357) (xy 182.07485 109.419243) (xy 182.033927 109.266516) (xy 181.95487 109.129584) - (xy 181.843066 109.01778) (xy 181.706134 108.938723) (xy 181.553407 108.8978) (xy 181.395293 108.8978) - (xy 181.242566 108.938723) (xy 181.105629 109.017783) (xy 181.099175 109.024237) (xy 181.044656 109.05201) - (xy 180.984225 109.042433) (xy 180.959174 109.024231) (xy 180.402046 108.467103) (xy 180.374269 108.412586) - (xy 180.38384 108.352154) (xy 180.427105 108.308889) (xy 180.47205 108.298099) (xy 180.598216 108.298099) - (xy 180.598232 108.298098) (xy 180.668753 108.291691) (xy 180.668759 108.291689) (xy 180.831042 108.24112) - (xy 180.83105 108.241117) (xy 180.976522 108.153175) (xy 181.096725 108.032972) (xy 181.184667 107.8875) - (xy 181.18467 107.887492) (xy 181.235239 107.72521) (xy 181.235241 107.725204) (xy 181.241649 107.654681) - (xy 181.24165 107.654668) (xy 181.24165 107.573101) (xy 181.241649 107.5731) (xy 180.44065 107.5731) - (xy 180.382459 107.554193) (xy 180.346495 107.504693) (xy 180.34165 107.4741) (xy 180.34165 107.323101) - (xy 180.341649 107.3231) (xy 180.19065 107.3231) (xy 180.132459 107.304193) (xy 180.096495 107.254693) - (xy 180.09165 107.2241) (xy 180.09165 106.348101) (xy 180.091648 106.348099) (xy 180.085075 106.3481) - (xy 180.014546 106.354508) (xy 180.01454 106.35451) (xy 179.852257 106.405079) (xy 179.852249 106.405082) - (xy 179.706777 106.493024) (xy 179.586574 106.613227) (xy 179.498632 106.758699) (xy 179.498628 106.758709) - (xy 179.497956 106.760867) (xy 179.497137 106.762022) (xy 179.496173 106.764165) (xy 179.495753 106.763976) - (xy 179.462587 106.810793) (xy 179.404627 106.830396) (xy 179.346214 106.812186) (xy 179.324189 106.790732) - (xy 179.273933 106.723599) (xy 179.249196 106.690554) (xy 179.249191 106.69055) (xy 179.133979 106.604302) - (xy 178.999138 106.55401) (xy 178.999133 106.554009) (xy 178.999131 106.554008) (xy 178.999127 106.554008) - (xy 178.967899 106.55065) (xy 178.939523 106.5476) (xy 178.93952 106.5476) (xy 178.443783 106.5476) - (xy 178.443779 106.5476) (xy 178.443778 106.547601) (xy 178.436599 106.548372) (xy 178.384169 106.554008) - (xy 178.384164 106.554009) (xy 178.24932 106.604302) (xy 178.134108 106.69055) (xy 178.1341 106.690558) - (xy 178.047852 106.80577) (xy 177.99756 106.940611) (xy 177.997558 106.940621) (xy 177.993986 106.973845) - (xy 177.968965 107.02968) (xy 177.915904 107.060146) (xy 177.855069 107.053604) (xy 177.825552 107.033266) - (xy 177.737866 106.94558) (xy 177.600934 106.866523) (xy 177.448207 106.8256) (xy 177.290093 106.8256) - (xy 177.137366 106.866523) (xy 177.000434 106.94558) (xy 176.88863 107.057384) (xy 176.809573 107.194316) - (xy 176.76865 107.347043) (xy 168.601638 107.347043) (xy 170.046086 105.902596) (xy 170.053203 105.898969) - (xy 170.057899 105.892507) (xy 170.079947 105.885343) (xy 170.100603 105.874819) (xy 170.11609 105.8736) - (xy 170.192151 105.8736) (xy 170.250342 105.892507) (xy 170.286306 105.942007) (xy 170.291151 105.9726) - (xy 170.291151 106.467963) (xy 170.294064 106.49309) (xy 170.300857 106.508474) (xy 170.339444 106.595865) - (xy 170.418885 106.675306) (xy 170.521659 106.720685) (xy 170.546785 106.7236) (xy 172.636514 106.723599) - (xy 172.661641 106.720685) (xy 172.764415 106.675306) (xy 172.843856 106.595865) (xy 172.889235 106.493091) - (xy 172.89215 106.467965) (xy 172.89215 105.9726) (xy 172.911057 105.914409) (xy 172.960557 105.878445) - (xy 172.99115 105.8736) (xy 173.646814 105.8736) (xy 173.646815 105.8736) (xy 173.84977 105.83323) - (xy 174.040948 105.754041) (xy 174.213005 105.639077) (xy 174.359327 105.492755) (xy 174.474291 105.320698) - (xy 174.55348 105.12952) (xy 174.58343 104.978944) (xy 174.610521 104.928258) (xy 175.183129 104.35565) - (xy 175.237644 104.327875) (xy 175.298076 104.337446) (xy 175.341341 104.380711) (xy 175.34459 104.387759) - (xy 175.357356 104.418579) (xy 175.357359 104.418585) (xy 175.393786 104.473101) (xy 175.444961 104.549689) - (xy 175.556461 104.661189) (xy 175.609016 104.696305) (xy 175.687564 104.74879) (xy 175.687575 104.748796) - (xy 175.741388 104.771085) (xy 175.833253 104.809137) (xy 175.987908 104.8399) (xy 178.612808 104.8399) - (xy 178.770492 104.8399) (xy 178.970464 104.8399) (xy 179.028655 104.858807) (xy 179.040468 104.868896) - (xy 180.562654 106.391082) (xy 180.590431 106.445599) (xy 180.59165 106.461086) (xy 180.59165 107.073099) - (xy 180.591651 107.0731) (xy 181.203664 107.0731) (xy 181.261855 107.092007) (xy 181.273668 107.102096) - (xy 185.826061 111.654489) (xy 185.957171 111.742094) (xy 186.102853 111.802438) (xy 186.257508 111.8332) - (xy 186.25751 111.8332) (xy 189.742191 111.8332) (xy 189.742192 111.8332) (xy 189.896847 111.802437) - (xy 190.042529 111.742094) (xy 190.173639 111.654489) (xy 191.456032 110.372096) (xy 191.510549 110.344319) - (xy 191.526036 110.3431) (xy 193.573159 110.3431) (xy 193.63135 110.362007) (xy 193.663844 110.406731) - (xy 193.674354 110.4181) (xy 195.04765 110.4181) (xy 195.105841 110.437007) (xy 195.141805 110.486507) - (xy 195.14665 110.5171) (xy 195.14665 110.8191) (xy 195.127743 110.877291) (xy 195.078243 110.913255) - (xy 195.04765 110.9181) (xy 193.674354 110.9181) (xy 193.674549 110.920586) (xy 193.674551 110.920593) - (xy 193.720369 111.0783) (xy 193.720369 111.078301) (xy 193.803964 111.219652) (xy 193.920096 111.335784) - (xy 193.947895 111.352225) (xy 193.988357 111.398122) (xy 193.994114 111.459036) (xy 193.977155 111.496226) - (xy 193.918856 111.575218) (xy 193.874005 111.703396) (xy 193.874003 111.703405) (xy 193.87115 111.733825) - (xy 193.87115 112.1011) (xy 193.852243 112.159291) (xy 193.802743 112.195255) (xy 193.77215 112.2001) - (xy 181.34065 112.2001) (xy 181.282459 112.181193) (xy 181.246495 112.131693) (xy 181.24165 112.1011) - (xy 181.24165 112.073101) (xy 181.241649 112.0731) (xy 180.44065 112.0731) (xy 180.382459 112.054193) - (xy 180.346495 112.004693) (xy 180.34165 111.9741) (xy 180.34165 111.823101) (xy 180.341649 111.8231) - (xy 180.19065 111.8231) (xy 180.132459 111.804193) (xy 180.096495 111.754693) (xy 180.09165 111.7241) - (xy 180.09165 110.848101) (xy 180.59165 110.848101) (xy 180.59165 111.573099) (xy 180.591651 111.5731) - (xy 181.241648 111.5731) (xy 181.241649 111.573099) (xy 181.241649 111.491533) (xy 181.241648 111.491517) - (xy 181.235241 111.420996) (xy 181.235239 111.42099) (xy 181.18467 111.258707) (xy 181.184667 111.258699) - (xy 181.096725 111.113227) (xy 180.976522 110.993024) (xy 180.83105 110.905082) (xy 180.831042 110.905079) - (xy 180.66876 110.85451) (xy 180.668754 110.854508) (xy 180.598231 110.8481) (xy 180.591651 110.8481) - (xy 180.59165 110.848101) (xy 180.09165 110.848101) (xy 180.091648 110.848099) (xy 180.085075 110.8481) - (xy 180.014546 110.854508) (xy 180.01454 110.85451) (xy 179.852257 110.905079) (xy 179.852249 110.905082) - (xy 179.706777 110.993024) (xy 179.586574 111.113227) (xy 179.498632 111.258699) (xy 179.498628 111.258709) - (xy 179.497956 111.260867) (xy 179.497137 111.262022) (xy 179.496173 111.264165) (xy 179.495753 111.263976) - (xy 179.462587 111.310793) (xy 179.404627 111.330396) (xy 179.346214 111.312186) (xy 179.324189 111.290732) - (xy 179.311074 111.273213) (xy 179.249196 111.190554) (xy 179.23389 111.179096) (xy 179.133979 111.104302) - (xy 178.999138 111.05401) (xy 178.999133 111.054009) (xy 178.999131 111.054008) (xy 178.999127 111.054008) - (xy 178.967899 111.05065) (xy 178.939523 111.0476) (xy 178.93952 111.0476) (xy 178.443783 111.0476) - (xy 178.443779 111.0476) (xy 178.443778 111.047601) (xy 178.436599 111.048372) (xy 178.384169 111.054008) - (xy 178.384164 111.054009) (xy 178.24932 111.104302) (xy 178.134108 111.19055) (xy 178.1341 111.190558) - (xy 178.047852 111.30577) (xy 177.99756 111.440611) (xy 177.997558 111.440622) (xy 177.995171 111.46283) - (xy 177.991314 111.498707) (xy 177.99115 111.500229) (xy 177.99115 112.145966) (xy 177.991151 112.14597) - (xy 177.997558 112.20558) (xy 177.997559 112.205585) (xy 178.047852 112.340429) (xy 178.1341 112.455641) - (xy 178.134104 112.455646) (xy 178.134107 112.455648) (xy 178.134108 112.455649) (xy 178.191412 112.498547) - (xy 178.226665 112.548556) (xy 178.225791 112.609735) (xy 178.189124 112.658716) (xy 178.132083 112.6768) - (xy 171.989436 112.6768) (xy 171.931245 112.657893) (xy 171.919432 112.647804) (xy 171.733742 112.462114) - (xy 171.733739 112.462111) (xy 171.665027 112.416199) (xy 171.602635 112.374509) (xy 171.602624 112.374503) - (xy 171.456947 112.314163) (xy 171.302294 112.2834) (xy 171.302292 112.2834) (xy 141.989692 112.2834) - (xy 141.832007 112.2834) (xy 141.832004 112.2834) (xy 141.677354 112.314162) (xy 141.677344 112.314165) - (xy 141.656499 112.322799) (xy 141.6565 112.3228) (xy 141.531671 112.374505) (xy 141.410237 112.455646) - (xy 141.410236 112.455647) (xy 141.400559 112.462112) (xy 125.409068 128.453604) (xy 125.354551 128.481381) - (xy 125.339064 128.4826) (xy 125.325036 128.4826) (xy 125.153947 128.509697) (xy 125.153943 128.509698) - (xy 124.989211 128.563223) (xy 124.989208 128.563225) (xy 124.834864 128.641866) (xy 124.694723 128.743685) - (xy 124.572235 128.866173) (xy 124.470416 129.006314) (xy 124.391775 129.160658) (xy 124.391773 129.160661) - (xy 124.338248 129.325393) (xy 124.338247 129.325397) (xy 124.31115 129.496485) (xy 124.31115 129.669714) - (xy 124.338247 129.840802) (xy 124.338248 129.840806) (xy 124.391773 130.005538) (xy 124.391775 130.005541) - (xy 124.453763 130.127202) (xy 124.470418 130.159888) (xy 124.572236 130.300028) (xy 124.694722 130.422514) - (xy 124.834862 130.524332) (xy 124.989205 130.602973) (xy 124.989207 130.602973) (xy 124.989208 130.602974) - (xy 124.989211 130.602976) (xy 125.153943 130.656501) (xy 125.153947 130.656502) (xy 125.325036 130.6836) - (xy 125.325039 130.6836) (xy 125.498264 130.6836) (xy 125.669352 130.656502) (xy 125.669356 130.656501) - (xy 125.834088 130.602976) (xy 125.83409 130.602974) (xy 125.834095 130.602973) (xy 125.988438 130.524332) - (xy 126.128578 130.422514) (xy 126.251064 130.300028) (xy 126.352882 130.159888) (xy 126.431523 130.005545) - (xy 126.485052 129.840801) (xy 126.485052 129.840798) (xy 126.486171 129.837356) (xy 126.522135 129.787856) - (xy 126.580326 129.768949) (xy 126.638517 129.787856) (xy 126.674481 129.837356) (xy 126.678107 129.852461) - (xy 126.683659 129.887513) (xy 126.746893 130.082127) (xy 126.839788 130.264446) (xy 126.960064 130.429991) - (xy 127.104758 130.574685) (xy 127.270303 130.694961) (xy 127.452622 130.787856) (xy 127.647239 130.851091) - (xy 127.647235 130.851091) (xy 127.701649 130.859708) (xy 127.70165 130.859707) (xy 127.70165 130.016112) - (xy 127.758657 130.049025) (xy 127.885824 130.0831) (xy 128.017476 130.0831) (xy 128.144643 130.049025) - (xy 128.20165 130.016112) (xy 128.20165 130.859708) (xy 128.256062 130.851091) (xy 128.450677 130.787856) - (xy 128.632996 130.694961) (xy 128.798541 130.574685) (xy 128.943235 130.429991) (xy 129.063511 130.264447) - (xy 129.13344 130.127202) (xy 129.176705 130.083938) (xy 129.237137 130.074366) (xy 129.291653 130.102143) - (xy 129.30986 130.127202) (xy 129.379788 130.264447) (xy 129.500064 130.429991) (xy 129.644758 130.574685) - (xy 129.810303 130.694961) (xy 129.992622 130.787856) (xy 130.187239 130.851091) (xy 130.187235 130.851091) - (xy 130.241649 130.859708) (xy 130.24165 130.859707) (xy 130.24165 130.016112) (xy 130.298657 130.049025) - (xy 130.425824 130.0831) (xy 130.557476 130.0831) (xy 130.684643 130.049025) (xy 130.74165 130.016112) - (xy 130.74165 130.859708) (xy 130.796062 130.851091) (xy 130.990677 130.787856) (xy 131.172996 130.694961) - (xy 131.338541 130.574685) (xy 131.483235 130.429991) (xy 131.603511 130.264446) (xy 131.696406 130.082127) - (xy 131.759641 129.887511) (xy 131.765192 129.852464) (xy 131.792968 129.797947) (xy 131.847484 129.770168) - (xy 131.907917 129.779739) (xy 131.951182 129.823002) (xy 131.957127 129.837356) (xy 132.011773 130.005538) - (xy 132.011775 130.005541) (xy 132.073763 130.127202) (xy 132.090418 130.159888) (xy 132.192236 130.300028) - (xy 132.314722 130.422514) (xy 132.454862 130.524332) (xy 132.609205 130.602973) (xy 132.609207 130.602973) - (xy 132.609208 130.602974) (xy 132.609211 130.602976) (xy 132.773943 130.656501) (xy 132.773947 130.656502) - (xy 132.945036 130.6836) (xy 132.945039 130.6836) (xy 133.118264 130.6836) (xy 133.289352 130.656502) - (xy 133.289356 130.656501) (xy 133.454088 130.602976) (xy 133.45409 130.602974) (xy 133.454095 130.602973) - (xy 133.608438 130.524332) (xy 133.748578 130.422514) (xy 133.871064 130.300028) (xy 133.972882 130.159888) - (xy 134.051523 130.005545) (xy 134.051524 130.00554) (xy 134.051526 130.005538) (xy 134.105051 129.840806) - (xy 134.105052 129.840802) (xy 134.13215 129.669714) (xy 134.13215 129.496485) (xy 137.01115 129.496485) - (xy 137.01115 129.669714) (xy 137.038247 129.840802) (xy 137.038248 129.840806) (xy 137.091773 130.005538) - (xy 137.091775 130.005541) (xy 137.153763 130.127202) (xy 137.170418 130.159888) (xy 137.272236 130.300028) - (xy 137.394722 130.422514) (xy 137.534862 130.524332) (xy 137.689205 130.602973) (xy 137.689207 130.602973) - (xy 137.689208 130.602974) (xy 137.689211 130.602976) (xy 137.853943 130.656501) (xy 137.853947 130.656502) - (xy 138.025036 130.6836) (xy 138.025039 130.6836) (xy 138.198264 130.6836) (xy 138.369352 130.656502) - (xy 138.369356 130.656501) (xy 138.534088 130.602976) (xy 138.53409 130.602974) (xy 138.534095 130.602973) - (xy 138.688438 130.524332) (xy 138.828578 130.422514) (xy 138.951064 130.300028) (xy 139.052882 130.159888) - (xy 139.131523 130.005545) (xy 139.131524 130.00554) (xy 139.131526 130.005538) (xy 139.185051 129.840806) - (xy 139.185052 129.840802) (xy 139.21215 129.669714) (xy 139.21215 129.496485) (xy 139.55115 129.496485) - (xy 139.55115 129.669714) (xy 139.578247 129.840802) (xy 139.578248 129.840806) (xy 139.631773 130.005538) - (xy 139.631775 130.005541) (xy 139.693763 130.127202) (xy 139.710418 130.159888) (xy 139.812236 130.300028) - (xy 139.934722 130.422514) (xy 140.074862 130.524332) (xy 140.229205 130.602973) (xy 140.229207 130.602973) - (xy 140.229208 130.602974) (xy 140.229211 130.602976) (xy 140.393943 130.656501) (xy 140.393947 130.656502) - (xy 140.565036 130.6836) (xy 140.565039 130.6836) (xy 140.738264 130.6836) (xy 140.909352 130.656502) - (xy 140.909356 130.656501) (xy 141.074088 130.602976) (xy 141.07409 130.602974) (xy 141.074095 130.602973) - (xy 141.228438 130.524332) (xy 141.368578 130.422514) (xy 141.491064 130.300028) (xy 141.592882 130.159888) - (xy 141.671523 130.005545) (xy 141.671524 130.00554) (xy 141.671526 130.005538) (xy 141.725051 129.840806) - (xy 141.725052 129.840802) (xy 141.75215 129.669714) (xy 141.75215 129.496485) (xy 142.09115 129.496485) - (xy 142.09115 129.669714) (xy 142.118247 129.840802) (xy 142.118248 129.840806) (xy 142.171773 130.005538) - (xy 142.171775 130.005541) (xy 142.233763 130.127202) (xy 142.250418 130.159888) (xy 142.352236 130.300028) - (xy 142.474722 130.422514) (xy 142.614862 130.524332) (xy 142.769205 130.602973) (xy 142.769207 130.602973) - (xy 142.769208 130.602974) (xy 142.769211 130.602976) (xy 142.933943 130.656501) (xy 142.933947 130.656502) - (xy 143.105036 130.6836) (xy 143.105039 130.6836) (xy 143.278264 130.6836) (xy 143.449352 130.656502) - (xy 143.449356 130.656501) (xy 143.614088 130.602976) (xy 143.61409 130.602974) (xy 143.614095 130.602973) - (xy 143.768438 130.524332) (xy 143.908578 130.422514) (xy 144.031064 130.300028) (xy 144.132882 130.159888) - (xy 144.211523 130.005545) (xy 144.211524 130.00554) (xy 144.211526 130.005538) (xy 144.265051 129.840806) - (xy 144.265052 129.840802) (xy 144.29215 129.669714) (xy 144.29215 129.496485) (xy 144.63115 129.496485) - (xy 144.63115 129.669714) (xy 144.658247 129.840802) (xy 144.658248 129.840806) (xy 144.711773 130.005538) - (xy 144.711775 130.005541) (xy 144.773763 130.127202) (xy 144.790418 130.159888) (xy 144.892236 130.300028) - (xy 145.014722 130.422514) (xy 145.154862 130.524332) (xy 145.309205 130.602973) (xy 145.309207 130.602973) - (xy 145.309208 130.602974) (xy 145.309211 130.602976) (xy 145.473943 130.656501) (xy 145.473947 130.656502) - (xy 145.645036 130.6836) (xy 145.645039 130.6836) (xy 145.818264 130.6836) (xy 145.989352 130.656502) - (xy 145.989356 130.656501) (xy 146.154088 130.602976) (xy 146.15409 130.602974) (xy 146.154095 130.602973) - (xy 146.308438 130.524332) (xy 146.448578 130.422514) (xy 146.571064 130.300028) (xy 146.672882 130.159888) - (xy 146.751523 130.005545) (xy 146.751524 130.00554) (xy 146.751526 130.005538) (xy 146.805051 129.840806) - (xy 146.805052 129.840802) (xy 146.83215 129.669714) (xy 146.83215 129.496485) (xy 147.17115 129.496485) - (xy 147.17115 129.669714) (xy 147.198247 129.840802) (xy 147.198248 129.840806) (xy 147.251773 130.005538) - (xy 147.251775 130.005541) (xy 147.313763 130.127202) (xy 147.330418 130.159888) (xy 147.432236 130.300028) - (xy 147.554722 130.422514) (xy 147.694862 130.524332) (xy 147.849205 130.602973) (xy 147.849207 130.602973) - (xy 147.849208 130.602974) (xy 147.849211 130.602976) (xy 148.013943 130.656501) (xy 148.013947 130.656502) - (xy 148.185036 130.6836) (xy 148.185039 130.6836) (xy 148.358264 130.6836) (xy 148.529352 130.656502) - (xy 148.529356 130.656501) (xy 148.694088 130.602976) (xy 148.69409 130.602974) (xy 148.694095 130.602973) - (xy 148.848438 130.524332) (xy 148.988578 130.422514) (xy 149.111064 130.300028) (xy 149.212882 130.159888) - (xy 149.291523 130.005545) (xy 149.291524 130.00554) (xy 149.291526 130.005538) (xy 149.345051 129.840806) - (xy 149.345052 129.840802) (xy 149.37215 129.669714) (xy 149.37215 129.496485) (xy 149.71115 129.496485) - (xy 149.71115 129.669714) (xy 149.738247 129.840802) (xy 149.738248 129.840806) (xy 149.791773 130.005538) - (xy 149.791775 130.005541) (xy 149.853763 130.127202) (xy 149.870418 130.159888) (xy 149.972236 130.300028) - (xy 150.094722 130.422514) (xy 150.234862 130.524332) (xy 150.389205 130.602973) (xy 150.389207 130.602973) - (xy 150.389208 130.602974) (xy 150.389211 130.602976) (xy 150.553943 130.656501) (xy 150.553947 130.656502) - (xy 150.725036 130.6836) (xy 150.725039 130.6836) (xy 150.898264 130.6836) (xy 151.069352 130.656502) - (xy 151.069356 130.656501) (xy 151.234088 130.602976) (xy 151.23409 130.602974) (xy 151.234095 130.602973) - (xy 151.388438 130.524332) (xy 151.528578 130.422514) (xy 151.651064 130.300028) (xy 151.752882 130.159888) - (xy 151.831523 130.005545) (xy 151.831524 130.00554) (xy 151.831526 130.005538) (xy 151.885051 129.840806) - (xy 151.885052 129.840802) (xy 151.91215 129.669714) (xy 151.91215 129.496485) (xy 151.885052 129.325397) - (xy 151.885051 129.325393) (xy 151.831526 129.160661) (xy 151.831524 129.160658) (xy 151.831523 129.160657) - (xy 151.831523 129.160655) (xy 151.752882 129.006312) (xy 151.651064 128.866172) (xy 151.528578 128.743686) - (xy 151.388438 128.641868) (xy 151.388437 128.641867) (xy 151.388435 128.641866) (xy 151.234091 128.563225) - (xy 151.234088 128.563223) (xy 151.069356 128.509698) (xy 151.069352 128.509697) (xy 150.898264 128.4826) - (xy 150.898261 128.4826) (xy 150.725039 128.4826) (xy 150.725036 128.4826) (xy 150.553947 128.509697) - (xy 150.553943 128.509698) (xy 150.389211 128.563223) (xy 150.389208 128.563225) (xy 150.234864 128.641866) - (xy 150.094723 128.743685) (xy 149.972235 128.866173) (xy 149.870416 129.006314) (xy 149.791775 129.160658) - (xy 149.791773 129.160661) (xy 149.738248 129.325393) (xy 149.738247 129.325397) (xy 149.71115 129.496485) - (xy 149.37215 129.496485) (xy 149.345052 129.325397) (xy 149.345051 129.325393) (xy 149.291526 129.160661) - (xy 149.291524 129.160658) (xy 149.291523 129.160657) (xy 149.291523 129.160655) (xy 149.212882 129.006312) - (xy 149.111064 128.866172) (xy 148.988578 128.743686) (xy 148.848438 128.641868) (xy 148.848437 128.641867) - (xy 148.848435 128.641866) (xy 148.694091 128.563225) (xy 148.694088 128.563223) (xy 148.529356 128.509698) - (xy 148.529352 128.509697) (xy 148.358264 128.4826) (xy 148.358261 128.4826) (xy 148.185039 128.4826) - (xy 148.185036 128.4826) (xy 148.013947 128.509697) (xy 148.013943 128.509698) (xy 147.849211 128.563223) - (xy 147.849208 128.563225) (xy 147.694864 128.641866) (xy 147.554723 128.743685) (xy 147.432235 128.866173) - (xy 147.330416 129.006314) (xy 147.251775 129.160658) (xy 147.251773 129.160661) (xy 147.198248 129.325393) - (xy 147.198247 129.325397) (xy 147.17115 129.496485) (xy 146.83215 129.496485) (xy 146.805052 129.325397) - (xy 146.805051 129.325393) (xy 146.751526 129.160661) (xy 146.751524 129.160658) (xy 146.751523 129.160657) - (xy 146.751523 129.160655) (xy 146.672882 129.006312) (xy 146.571064 128.866172) (xy 146.448578 128.743686) - (xy 146.308438 128.641868) (xy 146.308437 128.641867) (xy 146.308435 128.641866) (xy 146.154091 128.563225) - (xy 146.154088 128.563223) (xy 145.989356 128.509698) (xy 145.989352 128.509697) (xy 145.818264 128.4826) - (xy 145.818261 128.4826) (xy 145.645039 128.4826) (xy 145.645036 128.4826) (xy 145.473947 128.509697) - (xy 145.473943 128.509698) (xy 145.309211 128.563223) (xy 145.309208 128.563225) (xy 145.154864 128.641866) - (xy 145.014723 128.743685) (xy 144.892235 128.866173) (xy 144.790416 129.006314) (xy 144.711775 129.160658) - (xy 144.711773 129.160661) (xy 144.658248 129.325393) (xy 144.658247 129.325397) (xy 144.63115 129.496485) - (xy 144.29215 129.496485) (xy 144.265052 129.325397) (xy 144.265051 129.325393) (xy 144.211526 129.160661) - (xy 144.211524 129.160658) (xy 144.211523 129.160657) (xy 144.211523 129.160655) (xy 144.132882 129.006312) - (xy 144.031064 128.866172) (xy 143.908578 128.743686) (xy 143.768438 128.641868) (xy 143.768437 128.641867) - (xy 143.768435 128.641866) (xy 143.614091 128.563225) (xy 143.614088 128.563223) (xy 143.449356 128.509698) - (xy 143.449352 128.509697) (xy 143.278264 128.4826) (xy 143.278261 128.4826) (xy 143.105039 128.4826) - (xy 143.105036 128.4826) (xy 142.933947 128.509697) (xy 142.933943 128.509698) (xy 142.769211 128.563223) - (xy 142.769208 128.563225) (xy 142.614864 128.641866) (xy 142.474723 128.743685) (xy 142.352235 128.866173) - (xy 142.250416 129.006314) (xy 142.171775 129.160658) (xy 142.171773 129.160661) (xy 142.118248 129.325393) - (xy 142.118247 129.325397) (xy 142.09115 129.496485) (xy 141.75215 129.496485) (xy 141.725052 129.325397) - (xy 141.725051 129.325393) (xy 141.671526 129.160661) (xy 141.671524 129.160658) (xy 141.671523 129.160657) - (xy 141.671523 129.160655) (xy 141.592882 129.006312) (xy 141.491064 128.866172) (xy 141.368578 128.743686) - (xy 141.228438 128.641868) (xy 141.228437 128.641867) (xy 141.228435 128.641866) (xy 141.074091 128.563225) - (xy 141.074088 128.563223) (xy 140.909356 128.509698) (xy 140.909352 128.509697) (xy 140.738264 128.4826) - (xy 140.738261 128.4826) (xy 140.565039 128.4826) (xy 140.565036 128.4826) (xy 140.393947 128.509697) - (xy 140.393943 128.509698) (xy 140.229211 128.563223) (xy 140.229208 128.563225) (xy 140.074864 128.641866) - (xy 139.934723 128.743685) (xy 139.812235 128.866173) (xy 139.710416 129.006314) (xy 139.631775 129.160658) - (xy 139.631773 129.160661) (xy 139.578248 129.325393) (xy 139.578247 129.325397) (xy 139.55115 129.496485) - (xy 139.21215 129.496485) (xy 139.185052 129.325397) (xy 139.185051 129.325393) (xy 139.131526 129.160661) - (xy 139.131524 129.160658) (xy 139.131523 129.160657) (xy 139.131523 129.160655) (xy 139.052882 129.006312) - (xy 138.951064 128.866172) (xy 138.828578 128.743686) (xy 138.688438 128.641868) (xy 138.688437 128.641867) - (xy 138.688435 128.641866) (xy 138.534091 128.563225) (xy 138.534088 128.563223) (xy 138.369356 128.509698) - (xy 138.369352 128.509697) (xy 138.198264 128.4826) (xy 138.198261 128.4826) (xy 138.025039 128.4826) - (xy 138.025036 128.4826) (xy 137.853947 128.509697) (xy 137.853943 128.509698) (xy 137.689211 128.563223) - (xy 137.689208 128.563225) (xy 137.534864 128.641866) (xy 137.394723 128.743685) (xy 137.272235 128.866173) - (xy 137.170416 129.006314) (xy 137.091775 129.160658) (xy 137.091773 129.160661) (xy 137.038248 129.325393) - (xy 137.038247 129.325397) (xy 137.01115 129.496485) (xy 134.13215 129.496485) (xy 134.105052 129.325397) - (xy 134.105051 129.325393) (xy 134.051526 129.160661) (xy 134.051524 129.160658) (xy 134.051523 129.160657) - (xy 134.051523 129.160655) (xy 133.972882 129.006312) (xy 133.871064 128.866172) (xy 133.748578 128.743686) - (xy 133.608438 128.641868) (xy 133.608437 128.641867) (xy 133.608435 128.641866) (xy 133.454091 128.563225) - (xy 133.454088 128.563223) (xy 133.289356 128.509698) (xy 133.289352 128.509697) (xy 133.118264 128.4826) - (xy 133.118261 128.4826) (xy 132.945039 128.4826) (xy 132.945036 128.4826) (xy 132.773947 128.509697) - (xy 132.773943 128.509698) (xy 132.609211 128.563223) (xy 132.609208 128.563225) (xy 132.454864 128.641866) - (xy 132.314723 128.743685) (xy 132.192235 128.866173) (xy 132.090416 129.006314) (xy 132.011775 129.160658) - (xy 132.011773 129.160661) (xy 131.957127 129.328843) (xy 131.921163 129.378343) (xy 131.862972 129.39725) - (xy 131.804782 129.378342) (xy 131.768818 129.328842) (xy 131.765192 129.313736) (xy 131.759641 129.278687) + (xy 120.064253 111.358243) (xy 119.964973 111.3481) (xy 119.941651 111.3481) (xy 119.94165 111.348101) + (xy 119.470909 111.348101) (xy 121.790314 109.028696) (xy 121.844831 109.000919) (xy 121.860318 108.9997) + (xy 163.971641 108.9997) (xy 164.029832 109.018607) (xy 164.041638 109.02869) (xy 164.122637 109.109689) + (xy 164.122639 109.10969) (xy 164.122641 109.109692) (xy 164.22536 109.168997) (xy 164.225361 109.168997) + (xy 164.225364 109.168999) (xy 164.339941 109.1997) (xy 164.339943 109.1997) (xy 164.458557 109.1997) + (xy 164.458559 109.1997) (xy 164.573136 109.168999) (xy 164.573138 109.168997) (xy 164.57314 109.168997) + (xy 164.675858 109.109692) (xy 164.675858 109.109691) (xy 164.675863 109.109689) (xy 164.759739 109.025813) + (xy 164.762711 109.020666) (xy 164.819047 108.92309) (xy 164.819047 108.923088) (xy 164.819049 108.923086) + (xy 164.84975 108.808509) (xy 164.84975 108.689891) (xy 164.819049 108.575314) (xy 164.819047 108.575311) + (xy 164.819047 108.575309) (xy 164.756495 108.466967) (xy 164.758729 108.465676) (xy 164.741986 108.418387) + (xy 164.759366 108.359722) (xy 164.80791 108.322477) (xy 164.840952 108.3168) (xy 167.135441 108.3168) + (xy 167.135442 108.3168) (xy 167.309416 108.282195) (xy 167.391356 108.248253) (xy 167.473297 108.214313) + (xy 167.496494 108.198813) (xy 167.588555 108.1373) (xy 167.588556 108.137299) (xy 167.620786 108.115764) + (xy 167.762859 107.973691) (xy 173.49645 107.973691) (xy 173.49645 108.092309) (xy 173.510598 108.145109) + (xy 173.527152 108.20689) (xy 173.586457 108.309608) (xy 173.586459 108.30961) (xy 173.586461 108.309613) + (xy 173.670337 108.393489) (xy 173.670339 108.39349) (xy 173.670341 108.393492) (xy 173.77306 108.452797) + (xy 173.773061 108.452797) (xy 173.773064 108.452799) (xy 173.887641 108.4835) (xy 173.887643 108.4835) + (xy 174.006257 108.4835) (xy 174.006259 108.4835) (xy 174.120836 108.452799) (xy 174.120838 108.452797) + (xy 174.12084 108.452797) (xy 174.223558 108.393492) (xy 174.223558 108.393491) (xy 174.223563 108.393489) + (xy 174.307439 108.309613) (xy 174.314087 108.298098) (xy 174.366747 108.20689) (xy 174.366747 108.206888) + (xy 174.366749 108.206886) (xy 174.39745 108.092309) (xy 174.39745 107.973691) (xy 174.366749 107.859114) + (xy 174.366747 107.859111) (xy 174.366747 107.859109) (xy 174.307442 107.756391) (xy 174.30744 107.756389) + (xy 174.307439 107.756387) (xy 174.223563 107.672511) (xy 174.22356 107.672509) (xy 174.223558 107.672507) + (xy 174.120839 107.613202) (xy 174.12084 107.613202) (xy 174.085538 107.603743) (xy 174.006259 107.5825) + (xy 173.887641 107.5825) (xy 173.83056 107.597795) (xy 173.773059 107.613202) (xy 173.670341 107.672507) + (xy 173.586457 107.756391) (xy 173.527152 107.859109) (xy 173.516963 107.897135) (xy 173.49645 107.973691) + (xy 167.762859 107.973691) (xy 168.369758 107.366791) (xy 176.91865 107.366791) (xy 176.91865 107.485409) + (xy 176.934245 107.543609) (xy 176.949352 107.59999) (xy 177.008657 107.702708) (xy 177.008659 107.70271) + (xy 177.008661 107.702713) (xy 177.092537 107.786589) (xy 177.092539 107.78659) (xy 177.092541 107.786592) + (xy 177.19526 107.845897) (xy 177.195261 107.845897) (xy 177.195264 107.845899) (xy 177.309841 107.8766) + (xy 177.309843 107.8766) (xy 177.428457 107.8766) (xy 177.428459 107.8766) (xy 177.543036 107.845899) + (xy 177.543038 107.845897) (xy 177.54304 107.845897) (xy 177.645758 107.786592) (xy 177.645758 107.786591) + (xy 177.645763 107.786589) (xy 177.729639 107.702713) (xy 177.731498 107.699493) (xy 177.788947 107.59999) + (xy 177.788947 107.599988) (xy 177.788949 107.599986) (xy 177.81965 107.485409) (xy 177.81965 107.366791) + (xy 177.788949 107.252214) (xy 177.788947 107.252211) (xy 177.788947 107.252209) (xy 177.729642 107.149491) + (xy 177.72964 107.149489) (xy 177.729639 107.149487) (xy 177.645763 107.065611) (xy 177.64576 107.065609) + (xy 177.645758 107.065607) (xy 177.557827 107.01484) (xy 178.14115 107.01484) (xy 178.14115 107.63136) + (xy 178.147145 107.672507) (xy 178.151077 107.699495) (xy 178.188873 107.776807) (xy 178.202452 107.804583) + (xy 178.285167 107.887298) (xy 178.338935 107.913583) (xy 178.390254 107.938672) (xy 178.390255 107.938672) + (xy 178.390257 107.938673) (xy 178.45839 107.9486) (xy 178.458393 107.9486) (xy 178.921881 107.9486) + (xy 178.980072 107.967507) (xy 178.991885 107.977596) (xy 180.724953 109.710664) (xy 180.724954 109.710664) + (xy 180.724955 109.710665) (xy 180.817021 109.7488) (xy 180.817022 109.7488) (xy 180.916677 109.7488) + (xy 181.046741 109.7488) (xy 181.104932 109.767707) (xy 181.116738 109.77779) (xy 181.197737 109.858789) + (xy 181.197739 109.85879) (xy 181.197741 109.858792) (xy 181.30046 109.918097) (xy 181.300461 109.918097) + (xy 181.300464 109.918099) (xy 181.415041 109.9488) (xy 181.415043 109.9488) (xy 181.533657 109.9488) + (xy 181.533659 109.9488) (xy 181.648236 109.918099) (xy 181.648238 109.918097) (xy 181.64824 109.918097) + (xy 181.750958 109.858792) (xy 181.750958 109.858791) (xy 181.750963 109.858789) (xy 181.834839 109.774913) + (xy 181.834842 109.774908) (xy 181.894147 109.67219) (xy 181.894147 109.672188) (xy 181.894149 109.672186) + (xy 181.92485 109.557609) (xy 181.92485 109.438991) (xy 181.894149 109.324414) (xy 181.894147 109.324411) + (xy 181.894147 109.324409) (xy 181.834842 109.221691) (xy 181.83484 109.221689) (xy 181.834839 109.221687) + (xy 181.750963 109.137811) (xy 181.75096 109.137809) (xy 181.750958 109.137807) (xy 181.648239 109.078502) + (xy 181.64824 109.078502) (xy 181.634701 109.074874) (xy 181.533659 109.0478) (xy 181.415041 109.0478) + (xy 181.344917 109.066589) (xy 181.300459 109.078502) (xy 181.197741 109.137807) (xy 181.19774 109.137808) + (xy 181.197737 109.13781) (xy 181.197737 109.137811) (xy 181.116742 109.218805) (xy 181.109627 109.22243) + (xy 181.104932 109.228893) (xy 181.082883 109.236056) (xy 181.062228 109.246581) (xy 181.046741 109.2478) + (xy 181.011619 109.2478) (xy 180.953428 109.228893) (xy 180.941615 109.218804) (xy 180.120646 108.397835) + (xy 180.092869 108.343318) (xy 180.09165 108.327831) (xy 180.09165 107.573101) (xy 180.59165 107.573101) + (xy 180.59165 108.298098) (xy 180.591651 108.298099) (xy 180.598216 108.298099) (xy 180.598232 108.298098) + (xy 180.668753 108.291691) (xy 180.668759 108.291689) (xy 180.831042 108.24112) (xy 180.83105 108.241117) + (xy 180.976522 108.153175) (xy 181.096725 108.032972) (xy 181.184667 107.8875) (xy 181.18467 107.887492) + (xy 181.235239 107.72521) (xy 181.235241 107.725204) (xy 181.241649 107.654681) (xy 181.24165 107.654668) + (xy 181.24165 107.573101) (xy 181.241649 107.5731) (xy 180.591651 107.5731) (xy 180.59165 107.573101) + (xy 180.09165 107.573101) (xy 180.091649 107.5731) (xy 179.44165 107.5731) (xy 179.438783 107.575967) + (xy 179.384266 107.603743) (xy 179.323835 107.594171) (xy 179.298777 107.575966) (xy 179.271146 107.548335) + (xy 179.243369 107.493818) (xy 179.24215 107.478331) (xy 179.24215 107.014841) (xy 179.24215 107.01484) + (xy 179.238752 106.991518) (xy 179.44165 106.991518) (xy 179.44165 107.073099) (xy 179.441651 107.0731) + (xy 180.091649 107.0731) (xy 180.09165 107.073099) (xy 180.09165 106.348101) (xy 180.091648 106.348099) + (xy 180.085075 106.3481) (xy 180.014546 106.354508) (xy 180.01454 106.35451) (xy 179.852257 106.405079) + (xy 179.852249 106.405082) (xy 179.706777 106.493024) (xy 179.586574 106.613227) (xy 179.498632 106.758699) + (xy 179.498629 106.758707) (xy 179.44806 106.920989) (xy 179.448058 106.920995) (xy 179.44165 106.991518) + (xy 179.238752 106.991518) (xy 179.232223 106.946707) (xy 179.21965 106.920989) (xy 179.190267 106.860885) + (xy 179.180848 106.841617) (xy 179.098133 106.758902) (xy 179.059129 106.739834) (xy 178.993045 106.707527) + (xy 178.965789 106.703556) (xy 178.92491 106.6976) (xy 178.45839 106.6976) (xy 178.428301 106.701984) + (xy 178.390254 106.707527) (xy 178.285168 106.758901) (xy 178.202451 106.841618) (xy 178.151077 106.946704) + (xy 178.151077 106.946707) (xy 178.14115 107.01484) (xy 177.557827 107.01484) (xy 177.543039 107.006302) + (xy 177.54304 107.006302) (xy 177.487865 106.991518) (xy 177.428459 106.9756) (xy 177.309841 106.9756) + (xy 177.250435 106.991518) (xy 177.195259 107.006302) (xy 177.092541 107.065607) (xy 177.008657 107.149491) + (xy 176.949352 107.252209) (xy 176.945389 107.267) (xy 176.91865 107.366791) (xy 168.369758 107.366791) + (xy 169.983953 105.752595) (xy 170.03847 105.724819) (xy 170.053957 105.7236) (xy 170.34215 105.7236) + (xy 170.400341 105.742507) (xy 170.436305 105.792007) (xy 170.44115 105.8226) (xy 170.44115 106.437927) + (xy 170.449882 106.48182) (xy 170.449884 106.481824) (xy 170.48251 106.530652) (xy 170.483146 106.531604) + (xy 170.532928 106.564867) (xy 170.543977 106.567064) (xy 170.576822 106.573599) (xy 170.576828 106.573599) + (xy 170.57683 106.5736) (xy 170.576831 106.5736) (xy 172.606469 106.5736) (xy 172.60647 106.5736) + (xy 172.606471 106.573599) (xy 172.606477 106.573599) (xy 172.628273 106.569262) (xy 172.650372 106.564867) + (xy 172.700154 106.531604) (xy 172.733417 106.481822) (xy 172.74215 106.43792) (xy 172.74215 105.8226) + (xy 172.761057 105.764409) (xy 172.810557 105.728445) (xy 172.84115 105.7236) (xy 173.63204 105.7236) + (xy 173.632041 105.7236) (xy 173.806016 105.688994) (xy 173.969897 105.621113) (xy 174.117385 105.522564) + (xy 174.242814 105.397135) (xy 174.341363 105.249647) (xy 174.409244 105.085766) (xy 174.44385 104.911791) + (xy 174.444799 104.907021) (xy 174.446821 104.907423) (xy 174.468029 104.858869) (xy 174.472048 104.854601) + (xy 175.253251 104.073397) (xy 175.307766 104.045622) (xy 175.368198 104.055193) (xy 175.411463 104.098458) + (xy 175.42035 104.124088) (xy 175.441246 104.229133) (xy 175.44125 104.229147) (xy 175.490284 104.347525) + (xy 175.490288 104.347533) (xy 175.527814 104.403693) (xy 175.561474 104.454069) (xy 175.652081 104.544676) + (xy 175.713574 104.585764) (xy 175.758616 104.615861) (xy 175.75862 104.615863) (xy 175.758623 104.615865) + (xy 175.877006 104.664901) (xy 176.002681 104.6899) (xy 178.627581 104.6899) (xy 178.755719 104.6899) + (xy 179.032596 104.6899) (xy 179.090787 104.708807) (xy 179.1026 104.718896) (xy 180.591723 106.208019) + (xy 180.6195 106.262536) (xy 180.609929 106.322968) (xy 180.591724 106.348025) (xy 180.59165 106.348099) + (xy 180.59165 107.073099) (xy 180.591651 107.0731) (xy 181.241648 107.0731) (xy 181.253129 107.061618) + (xy 181.260556 107.038761) (xy 181.310056 107.002797) (xy 181.371242 107.002797) (xy 181.41065 107.026946) + (xy 185.921681 111.537977) (xy 185.921684 111.537979) (xy 186.012125 111.598409) (xy 186.012124 111.598409) + (xy 186.02822 111.609164) (xy 186.043121 111.615336) (xy 186.146606 111.658201) (xy 186.272281 111.6832) + (xy 186.272282 111.6832) (xy 189.727418 111.6832) (xy 189.727419 111.6832) (xy 189.853094 111.658201) + (xy 189.971477 111.609165) (xy 189.971477 111.609164) (xy 189.971479 111.609164) (xy 189.987575 111.598409) + (xy 190.006693 111.585635) (xy 190.078019 111.537977) (xy 191.3939 110.222096) (xy 191.448417 110.194319) + (xy 191.463904 110.1931) (xy 193.60734 110.1931) (xy 193.665531 110.212007) (xy 193.701495 110.261507) + (xy 193.702409 110.31972) (xy 193.674551 110.415606) (xy 193.674549 110.415613) (xy 193.674354 110.4181) + (xy 195.04765 110.4181) (xy 195.105841 110.437007) (xy 195.141805 110.486507) (xy 195.14665 110.5171) + (xy 195.14665 110.8191) (xy 195.127743 110.877291) (xy 195.078243 110.913255) (xy 195.04765 110.9181) + (xy 193.674354 110.9181) (xy 193.674549 110.920586) (xy 193.674551 110.920593) (xy 193.720369 111.0783) + (xy 193.720369 111.078301) (xy 193.803964 111.219652) (xy 193.920097 111.335785) (xy 194.061448 111.41938) + (xy 194.067165 111.421854) (xy 194.066339 111.423762) (xy 194.109334 111.45298) (xy 194.130062 111.510547) + (xy 194.112994 111.569304) (xy 194.101115 111.583663) (xy 194.069445 111.615333) (xy 194.024064 111.718111) + (xy 194.02115 111.74323) (xy 194.02115 112.13296) (xy 194.021151 112.132963) (xy 194.024064 112.15809) + (xy 194.047476 112.211112) (xy 194.053684 112.271982) (xy 194.022928 112.324875) (xy 193.966956 112.349589) + (xy 193.956911 112.3501) (xy 181.330867 112.3501) (xy 181.272676 112.331193) (xy 181.236712 112.281693) + (xy 181.23641 112.230778) (xy 181.234219 112.230343) (xy 181.235241 112.225204) (xy 181.241649 112.154681) + (xy 181.24165 112.154668) (xy 181.24165 112.073101) (xy 181.241649 112.0731) (xy 179.44165 112.0731) + (xy 179.438783 112.075967) (xy 179.384266 112.103743) (xy 179.323835 112.094171) (xy 179.298777 112.075966) + (xy 179.271146 112.048335) (xy 179.243369 111.993818) (xy 179.24215 111.978331) (xy 179.24215 111.514841) + (xy 179.24215 111.51484) (xy 179.238752 111.491518) (xy 179.44165 111.491518) (xy 179.44165 111.573099) + (xy 179.441651 111.5731) (xy 180.091649 111.5731) (xy 180.09165 111.573099) (xy 180.09165 110.848101) + (xy 180.59165 110.848101) (xy 180.59165 111.573099) (xy 180.591651 111.5731) (xy 181.241648 111.5731) + (xy 181.241649 111.573099) (xy 181.241649 111.491533) (xy 181.241648 111.491517) (xy 181.235241 111.420996) + (xy 181.235239 111.42099) (xy 181.18467 111.258707) (xy 181.184667 111.258699) (xy 181.096725 111.113227) + (xy 180.976522 110.993024) (xy 180.83105 110.905082) (xy 180.831042 110.905079) (xy 180.66876 110.85451) + (xy 180.668754 110.854508) (xy 180.598231 110.8481) (xy 180.591651 110.8481) (xy 180.59165 110.848101) + (xy 180.09165 110.848101) (xy 180.091648 110.848099) (xy 180.085075 110.8481) (xy 180.014546 110.854508) + (xy 180.01454 110.85451) (xy 179.852257 110.905079) (xy 179.852249 110.905082) (xy 179.706777 110.993024) + (xy 179.586574 111.113227) (xy 179.498632 111.258699) (xy 179.498629 111.258707) (xy 179.44806 111.420989) + (xy 179.448058 111.420995) (xy 179.44165 111.491518) (xy 179.238752 111.491518) (xy 179.232223 111.446707) + (xy 179.228038 111.438147) (xy 179.185856 111.351862) (xy 179.180848 111.341617) (xy 179.098133 111.258902) + (xy 179.098113 111.258892) (xy 178.993045 111.207527) (xy 178.965789 111.203556) (xy 178.92491 111.1976) + (xy 178.45839 111.1976) (xy 178.424323 111.202563) (xy 178.390254 111.207527) (xy 178.285168 111.258901) + (xy 178.202451 111.341618) (xy 178.151077 111.446704) (xy 178.146113 111.480773) (xy 178.14115 111.51484) + (xy 178.14115 112.13136) (xy 178.145045 112.15809) (xy 178.151077 112.199495) (xy 178.202451 112.304581) + (xy 178.202452 112.304583) (xy 178.285167 112.387298) (xy 178.335265 112.411789) (xy 178.390254 112.438672) + (xy 178.390255 112.438672) (xy 178.390257 112.438673) (xy 178.45839 112.4486) (xy 178.458393 112.4486) + (xy 178.921881 112.4486) (xy 178.980072 112.467507) (xy 178.991884 112.477596) (xy 179.172085 112.657796) + (xy 179.199863 112.712313) (xy 179.190292 112.772745) (xy 179.147027 112.81601) (xy 179.102082 112.8268) + (xy 171.927304 112.8268) (xy 171.869113 112.807893) (xy 171.857301 112.797804) (xy 171.638118 112.578622) + (xy 171.531576 112.507434) (xy 171.413197 112.4584) (xy 171.413195 112.458399) (xy 171.413194 112.458399) + (xy 171.287519 112.4334) (xy 141.846781 112.4334) (xy 141.84678 112.4334) (xy 141.794649 112.44377) + (xy 141.721106 112.458399) (xy 141.721105 112.458399) (xy 141.721102 112.4584) (xy 141.602723 112.507434) + (xy 141.496183 112.578621) (xy 125.4712 128.603604) (xy 125.416683 128.631381) (xy 125.401196 128.6326) + (xy 125.318031 128.6326) (xy 125.1344 128.669126) (xy 124.96142 128.740777) (xy 124.961411 128.740781) + (xy 124.805742 128.844798) (xy 124.805738 128.844801) (xy 124.673351 128.977188) (xy 124.673348 128.977192) + (xy 124.569331 129.132861) (xy 124.569327 129.13287) (xy 124.497676 129.30585) (xy 124.46115 129.489481) + (xy 124.46115 129.676718) (xy 124.497676 129.860349) (xy 124.569327 130.033329) (xy 124.569331 130.033338) + (xy 124.643715 130.144659) (xy 124.673348 130.189008) (xy 124.805742 130.321402) (xy 124.872113 130.365749) + (xy 124.961411 130.425418) (xy 124.961417 130.42542) (xy 124.961419 130.425422) (xy 125.134399 130.497073) + (xy 125.318034 130.5336) (xy 125.318035 130.5336) (xy 125.505265 130.5336) (xy 125.505266 130.5336) + (xy 125.688901 130.497073) (xy 125.861881 130.425422) (xy 125.861884 130.425419) (xy 125.861888 130.425418) + (xy 125.906837 130.395382) (xy 126.017558 130.321402) (xy 126.149952 130.189008) (xy 126.249525 130.039987) + (xy 126.253968 130.033338) (xy 126.253969 130.033334) (xy 126.253972 130.033331) (xy 126.325623 129.860351) + (xy 126.36215 129.676716) (xy 126.36215 129.593552) (xy 126.364618 129.585954) (xy 126.363369 129.578065) + (xy 126.373893 129.557409) (xy 126.381057 129.535361) (xy 126.391134 129.523561) (xy 126.556269 129.358426) + (xy 126.610782 129.330652) (xy 126.629401 129.3336) (xy 126.629401 129.3331) (xy 127.518638 129.3331) + (xy 127.485725 129.390107) (xy 127.45165 129.517274) (xy 127.45165 129.648926) (xy 127.485725 129.776093) + (xy 127.518638 129.8331) (xy 126.67504 129.8331) (xy 126.683659 129.887514) (xy 126.746893 130.082127) + (xy 126.839788 130.264446) (xy 126.960064 130.429991) (xy 127.104758 130.574685) (xy 127.270303 130.694961) + (xy 127.452622 130.787856) (xy 127.647239 130.851091) (xy 127.647235 130.851091) (xy 127.701649 130.859708) + (xy 127.70165 130.859707) (xy 127.70165 130.016112) (xy 127.758657 130.049025) (xy 127.885824 130.0831) + (xy 128.017476 130.0831) (xy 128.144643 130.049025) (xy 128.20165 130.016112) (xy 128.20165 130.859708) + (xy 128.256062 130.851091) (xy 128.450677 130.787856) (xy 128.632996 130.694961) (xy 128.798541 130.574685) + (xy 128.943235 130.429991) (xy 129.063511 130.264447) (xy 129.13344 130.127202) (xy 129.176705 130.083938) + (xy 129.237137 130.074366) (xy 129.291653 130.102143) (xy 129.30986 130.127202) (xy 129.379788 130.264447) + (xy 129.500064 130.429991) (xy 129.644758 130.574685) (xy 129.810303 130.694961) (xy 129.992622 130.787856) + (xy 130.187239 130.851091) (xy 130.187235 130.851091) (xy 130.241649 130.859708) (xy 130.24165 130.859707) + (xy 130.24165 130.016112) (xy 130.298657 130.049025) (xy 130.425824 130.0831) (xy 130.557476 130.0831) + (xy 130.684643 130.049025) (xy 130.74165 130.016112) (xy 130.74165 130.859708) (xy 130.796062 130.851091) + (xy 130.990677 130.787856) (xy 131.172996 130.694961) (xy 131.338541 130.574685) (xy 131.483235 130.429991) + (xy 131.603511 130.264446) (xy 131.696406 130.082127) (xy 131.75964 129.887514) (xy 131.768259 129.8331) + (xy 130.924662 129.8331) (xy 130.957575 129.776093) (xy 130.99165 129.648926) (xy 130.99165 129.517274) + (xy 130.984203 129.489481) (xy 132.08115 129.489481) (xy 132.08115 129.676718) (xy 132.117676 129.860349) + (xy 132.189327 130.033329) (xy 132.189331 130.033338) (xy 132.263715 130.144659) (xy 132.293348 130.189008) + (xy 132.425742 130.321402) (xy 132.492113 130.365749) (xy 132.581411 130.425418) (xy 132.581417 130.42542) + (xy 132.581419 130.425422) (xy 132.754399 130.497073) (xy 132.938034 130.5336) (xy 132.938035 130.5336) + (xy 133.125265 130.5336) (xy 133.125266 130.5336) (xy 133.308901 130.497073) (xy 133.481881 130.425422) + (xy 133.481884 130.425419) (xy 133.481888 130.425418) (xy 133.526837 130.395382) (xy 133.637558 130.321402) + (xy 133.769952 130.189008) (xy 133.869525 130.039987) (xy 133.873968 130.033338) (xy 133.873969 130.033334) + (xy 133.873972 130.033331) (xy 133.945623 129.860351) (xy 133.98215 129.676716) (xy 133.98215 129.489484) + (xy 133.982149 129.489481) (xy 137.16115 129.489481) (xy 137.16115 129.676718) (xy 137.197676 129.860349) + (xy 137.269327 130.033329) (xy 137.269331 130.033338) (xy 137.343715 130.144659) (xy 137.373348 130.189008) + (xy 137.505742 130.321402) (xy 137.572113 130.365749) (xy 137.661411 130.425418) (xy 137.661417 130.42542) + (xy 137.661419 130.425422) (xy 137.834399 130.497073) (xy 138.018034 130.5336) (xy 138.018035 130.5336) + (xy 138.205265 130.5336) (xy 138.205266 130.5336) (xy 138.388901 130.497073) (xy 138.561881 130.425422) + (xy 138.561884 130.425419) (xy 138.561888 130.425418) (xy 138.606837 130.395382) (xy 138.717558 130.321402) + (xy 138.849952 130.189008) (xy 138.949525 130.039987) (xy 138.953968 130.033338) (xy 138.953969 130.033334) + (xy 138.953972 130.033331) (xy 139.025623 129.860351) (xy 139.06215 129.676716) (xy 139.06215 129.489484) + (xy 139.062149 129.489481) (xy 139.70115 129.489481) (xy 139.70115 129.676718) (xy 139.737676 129.860349) + (xy 139.809327 130.033329) (xy 139.809331 130.033338) (xy 139.883715 130.144659) (xy 139.913348 130.189008) + (xy 140.045742 130.321402) (xy 140.112113 130.365749) (xy 140.201411 130.425418) (xy 140.201417 130.42542) + (xy 140.201419 130.425422) (xy 140.374399 130.497073) (xy 140.558034 130.5336) (xy 140.558035 130.5336) + (xy 140.745265 130.5336) (xy 140.745266 130.5336) (xy 140.928901 130.497073) (xy 141.101881 130.425422) + (xy 141.101884 130.425419) (xy 141.101888 130.425418) (xy 141.146837 130.395382) (xy 141.257558 130.321402) + (xy 141.389952 130.189008) (xy 141.489525 130.039987) (xy 141.493968 130.033338) (xy 141.493969 130.033334) + (xy 141.493972 130.033331) (xy 141.565623 129.860351) (xy 141.60215 129.676716) (xy 141.60215 129.489484) + (xy 141.602149 129.489481) (xy 142.24115 129.489481) (xy 142.24115 129.676718) (xy 142.277676 129.860349) + (xy 142.349327 130.033329) (xy 142.349331 130.033338) (xy 142.423715 130.144659) (xy 142.453348 130.189008) + (xy 142.585742 130.321402) (xy 142.652113 130.365749) (xy 142.741411 130.425418) (xy 142.741417 130.42542) + (xy 142.741419 130.425422) (xy 142.914399 130.497073) (xy 143.098034 130.5336) (xy 143.098035 130.5336) + (xy 143.285265 130.5336) (xy 143.285266 130.5336) (xy 143.468901 130.497073) (xy 143.641881 130.425422) + (xy 143.641884 130.425419) (xy 143.641888 130.425418) (xy 143.686837 130.395382) (xy 143.797558 130.321402) + (xy 143.929952 130.189008) (xy 144.029525 130.039987) (xy 144.033968 130.033338) (xy 144.033969 130.033334) + (xy 144.033972 130.033331) (xy 144.105623 129.860351) (xy 144.14215 129.676716) (xy 144.14215 129.489484) + (xy 144.142149 129.489481) (xy 144.78115 129.489481) (xy 144.78115 129.676718) (xy 144.817676 129.860349) + (xy 144.889327 130.033329) (xy 144.889331 130.033338) (xy 144.963715 130.144659) (xy 144.993348 130.189008) + (xy 145.125742 130.321402) (xy 145.192113 130.365749) (xy 145.281411 130.425418) (xy 145.281417 130.42542) + (xy 145.281419 130.425422) (xy 145.454399 130.497073) (xy 145.638034 130.5336) (xy 145.638035 130.5336) + (xy 145.825265 130.5336) (xy 145.825266 130.5336) (xy 146.008901 130.497073) (xy 146.181881 130.425422) + (xy 146.181884 130.425419) (xy 146.181888 130.425418) (xy 146.226837 130.395382) (xy 146.337558 130.321402) + (xy 146.469952 130.189008) (xy 146.569525 130.039987) (xy 146.573968 130.033338) (xy 146.573969 130.033334) + (xy 146.573972 130.033331) (xy 146.645623 129.860351) (xy 146.68215 129.676716) (xy 146.68215 129.489484) + (xy 146.682149 129.489481) (xy 147.32115 129.489481) (xy 147.32115 129.676718) (xy 147.357676 129.860349) + (xy 147.429327 130.033329) (xy 147.429331 130.033338) (xy 147.503715 130.144659) (xy 147.533348 130.189008) + (xy 147.665742 130.321402) (xy 147.732113 130.365749) (xy 147.821411 130.425418) (xy 147.821417 130.42542) + (xy 147.821419 130.425422) (xy 147.994399 130.497073) (xy 148.178034 130.5336) (xy 148.178035 130.5336) + (xy 148.365265 130.5336) (xy 148.365266 130.5336) (xy 148.548901 130.497073) (xy 148.721881 130.425422) + (xy 148.721884 130.425419) (xy 148.721888 130.425418) (xy 148.766837 130.395382) (xy 148.877558 130.321402) + (xy 149.009952 130.189008) (xy 149.109525 130.039987) (xy 149.113968 130.033338) (xy 149.113969 130.033334) + (xy 149.113972 130.033331) (xy 149.185623 129.860351) (xy 149.22215 129.676716) (xy 149.22215 129.489484) + (xy 149.222149 129.489481) (xy 149.86115 129.489481) (xy 149.86115 129.676718) (xy 149.897676 129.860349) + (xy 149.969327 130.033329) (xy 149.969331 130.033338) (xy 150.043715 130.144659) (xy 150.073348 130.189008) + (xy 150.205742 130.321402) (xy 150.272113 130.365749) (xy 150.361411 130.425418) (xy 150.361417 130.42542) + (xy 150.361419 130.425422) (xy 150.534399 130.497073) (xy 150.718034 130.5336) (xy 150.718035 130.5336) + (xy 150.905265 130.5336) (xy 150.905266 130.5336) (xy 151.088901 130.497073) (xy 151.261881 130.425422) + (xy 151.261884 130.425419) (xy 151.261888 130.425418) (xy 151.306837 130.395382) (xy 151.417558 130.321402) + (xy 151.549952 130.189008) (xy 151.649525 130.039987) (xy 151.653968 130.033338) (xy 151.653969 130.033334) + (xy 151.653972 130.033331) (xy 151.725623 129.860351) (xy 151.76215 129.676716) (xy 151.76215 129.56143) + (xy 158.875 129.56143) (xy 158.875 130.154999) (xy 158.875001 130.155) (xy 159.525 130.155) (xy 159.525 130.655) + (xy 158.875001 130.655) (xy 158.875 130.655001) (xy 158.875 131.248569) (xy 158.911508 131.432104) + (xy 158.911508 131.432106) (xy 158.983118 131.604989) (xy 158.983124 131.605001) (xy 159.087087 131.760589) + (xy 159.08709 131.760593) (xy 159.219406 131.892909) (xy 159.21941 131.892912) (xy 159.374998 131.996875) + (xy 159.37501 131.996881) (xy 159.547888 132.068489) (xy 159.547899 132.068492) (xy 159.575 132.073882) + (xy 159.575 131.321988) (xy 159.58494 131.339205) (xy 159.640795 131.39506) (xy 159.709204 131.434556) + (xy 159.785504 131.455) (xy 159.864496 131.455) (xy 159.940796 131.434556) (xy 160.009205 131.39506) + (xy 160.06506 131.339205) (xy 160.075 131.321988) (xy 160.075 132.073881) (xy 160.1021 132.068492) + (xy 160.102111 132.068489) (xy 160.274989 131.996881) (xy 160.275001 131.996875) (xy 160.430589 131.892912) + (xy 160.430593 131.892909) (xy 160.562909 131.760593) (xy 160.562912 131.760589) (xy 160.666879 131.604994) + (xy 160.671571 131.593666) (xy 160.711306 131.547139) (xy 160.770801 131.532854) (xy 160.800922 131.540085) + (xy 160.927065 131.592335) (xy 161.091279 131.624999) (xy 161.091283 131.625) (xy 161.258717 131.625) + (xy 161.25872 131.624999) (xy 161.422933 131.592335) (xy 161.422939 131.592333) (xy 161.575557 131.529115) + (xy 166.724438 131.529115) (xy 166.877065 131.592335) (xy 167.041279 131.624999) (xy 167.041283 131.625) + (xy 167.208717 131.625) (xy 167.20872 131.624999) (xy 167.372934 131.592335) (xy 167.499077 131.540085) + (xy 167.560074 131.535284) (xy 167.612243 131.567254) (xy 167.628426 131.593661) (xy 167.633119 131.60499) + (xy 167.633124 131.605001) (xy 167.737087 131.760589) (xy 167.73709 131.760593) (xy 167.869406 131.892909) + (xy 167.86941 131.892912) (xy 168.024998 131.996875) (xy 168.02501 131.996881) (xy 168.197888 132.068489) + (xy 168.197899 132.068492) (xy 168.225 132.073882) (xy 168.225 131.321988) (xy 168.23494 131.339205) + (xy 168.290795 131.39506) (xy 168.359204 131.434556) (xy 168.435504 131.455) (xy 168.514496 131.455) + (xy 168.590796 131.434556) (xy 168.659205 131.39506) (xy 168.71506 131.339205) (xy 168.725 131.321988) + (xy 168.725 132.073881) (xy 168.7521 132.068492) (xy 168.752111 132.068489) (xy 168.924989 131.996881) + (xy 168.925001 131.996875) (xy 169.080589 131.892912) (xy 169.080593 131.892909) (xy 169.212909 131.760593) + (xy 169.212912 131.760589) (xy 169.316875 131.605001) (xy 169.316881 131.604989) (xy 169.388491 131.432106) + (xy 169.388491 131.432104) (xy 169.424999 131.248569) (xy 169.425 131.248565) (xy 169.425 130.655001) + (xy 169.424999 130.655) (xy 168.775 130.655) (xy 168.775 130.155) (xy 169.424999 130.155) (xy 169.425 130.154999) + (xy 169.425 129.561434) (xy 169.424999 129.56143) (xy 169.388491 129.377895) (xy 169.388491 129.377893) + (xy 169.316881 129.20501) (xy 169.316875 129.204998) (xy 169.212912 129.04941) (xy 169.212909 129.049406) + (xy 169.080593 128.91709) (xy 169.080589 128.917087) (xy 168.925001 128.813124) (xy 168.924992 128.81312) + (xy 168.752105 128.741508) (xy 168.725 128.736116) (xy 168.725 129.488011) (xy 168.71506 129.470795) + (xy 168.659205 129.41494) (xy 168.590796 129.375444) (xy 168.514496 129.355) (xy 168.435504 129.355) + (xy 168.359204 129.375444) (xy 168.290795 129.41494) (xy 168.23494 129.470795) (xy 168.225 129.488011) + (xy 168.225 128.736116) (xy 168.197894 128.741508) (xy 168.025006 128.81312) (xy 167.928306 128.877733) + (xy 167.926618 128.894871) (xy 167.934837 128.911002) (xy 167.925266 128.971434) (xy 167.90706 128.996492) + (xy 167.478554 129.424999) (xy 167.478554 129.425) (xy 167.90706 129.853507) (xy 167.934837 129.908023) + (xy 167.925266 129.968455) (xy 167.90706 129.993513) (xy 167.800574 130.099999) (xy 167.90706 130.206485) + (xy 167.934837 130.261002) (xy 167.925266 130.321434) (xy 167.90706 130.346493) (xy 167.301777 130.951777) + (xy 166.724438 131.529115) (xy 161.575557 131.529115) (xy 161.575559 131.529114) (xy 160.998223 130.951777) + (xy 160.781664 130.735218) (xy 160.975 130.735218) (xy 160.975 130.814782) (xy 161.005448 130.888291) + (xy 161.061709 130.944552) (xy 161.135218 130.975) (xy 161.214782 130.975) (xy 161.288291 130.944552) + (xy 161.344552 130.888291) (xy 161.375 130.814782) (xy 161.375 130.735218) (xy 161.344552 130.661709) + (xy 161.288291 130.605448) (xy 161.214782 130.575) (xy 161.135218 130.575) (xy 161.061709 130.605448) + (xy 161.005448 130.661709) (xy 160.975 130.735218) (xy 160.781664 130.735218) (xy 160.392939 130.346493) + (xy 160.365162 130.291976) (xy 160.374733 130.231544) (xy 160.39294 130.206485) (xy 160.499425 130.1) + (xy 160.853555 130.1) (xy 161.175 130.421445) (xy 161.496445 130.1) (xy 161.175 129.778555) (xy 160.853555 130.1) + (xy 160.499425 130.1) (xy 160.392939 129.993514) (xy 160.365162 129.938997) (xy 160.374733 129.878565) + (xy 160.392939 129.853506) (xy 160.821446 129.424999) (xy 160.781665 129.385218) (xy 160.975 129.385218) + (xy 160.975 129.464782) (xy 161.005448 129.538291) (xy 161.061709 129.594552) (xy 161.135218 129.625) + (xy 161.214782 129.625) (xy 161.288291 129.594552) (xy 161.344552 129.538291) (xy 161.375 129.464782) + (xy 161.375 129.385218) (xy 161.344552 129.311709) (xy 161.288291 129.255448) (xy 161.214782 129.225) + (xy 161.135218 129.225) (xy 161.061709 129.255448) (xy 161.005448 129.311709) (xy 160.975 129.385218) + (xy 160.781665 129.385218) (xy 160.392939 128.996492) (xy 160.365162 128.941976) (xy 160.373089 128.891919) + (xy 160.371692 128.877733) (xy 160.274991 128.81312) (xy 160.231087 128.794934) (xy 160.102105 128.741508) + (xy 160.075 128.736116) (xy 160.075 129.488011) (xy 160.06506 129.470795) (xy 160.009205 129.41494) + (xy 159.940796 129.375444) (xy 159.864496 129.355) (xy 159.785504 129.355) (xy 159.709204 129.375444) + (xy 159.640795 129.41494) (xy 159.58494 129.470795) (xy 159.575 129.488011) (xy 159.575 128.736116) + (xy 159.547894 128.741508) (xy 159.375007 128.81312) (xy 159.374998 128.813124) (xy 159.21941 128.917087) + (xy 159.219406 128.91709) (xy 159.08709 129.049406) (xy 159.087087 129.04941) (xy 158.983124 129.204998) + (xy 158.983118 129.20501) (xy 158.911508 129.377893) (xy 158.911508 129.377895) (xy 158.875 129.56143) + (xy 151.76215 129.56143) (xy 151.76215 129.489484) (xy 151.725623 129.305849) (xy 151.653972 129.132869) + (xy 151.65397 129.132867) (xy 151.653968 129.132861) (xy 151.58156 129.024497) (xy 151.549952 128.977192) + (xy 151.417558 128.844798) (xy 151.373209 128.815165) (xy 151.261888 128.740781) (xy 151.261879 128.740777) + (xy 151.093141 128.670883) (xy 160.774438 128.670883) (xy 161.175 129.071445) (xy 161.57556 128.670884) + (xy 161.57556 128.670883) (xy 161.422936 128.607665) (xy 161.25872 128.575) (xy 161.091279 128.575) + (xy 160.927064 128.607665) (xy 160.927062 128.607665) (xy 160.774438 128.670883) (xy 151.093141 128.670883) + (xy 151.088899 128.669126) (xy 150.905268 128.6326) (xy 150.905266 128.6326) (xy 150.718034 128.6326) + (xy 150.718031 128.6326) (xy 150.5344 128.669126) (xy 150.36142 128.740777) (xy 150.361411 128.740781) + (xy 150.205742 128.844798) (xy 150.205738 128.844801) (xy 150.073351 128.977188) (xy 150.073348 128.977192) + (xy 149.969331 129.132861) (xy 149.969327 129.13287) (xy 149.897676 129.30585) (xy 149.86115 129.489481) + (xy 149.222149 129.489481) (xy 149.185623 129.305849) (xy 149.113972 129.132869) (xy 149.11397 129.132867) + (xy 149.113968 129.132861) (xy 149.04156 129.024497) (xy 149.009952 128.977192) (xy 148.877558 128.844798) + (xy 148.833209 128.815165) (xy 148.721888 128.740781) (xy 148.721879 128.740777) (xy 148.548899 128.669126) + (xy 148.365268 128.6326) (xy 148.365266 128.6326) (xy 148.178034 128.6326) (xy 148.178031 128.6326) + (xy 147.9944 128.669126) (xy 147.82142 128.740777) (xy 147.821411 128.740781) (xy 147.665742 128.844798) + (xy 147.665738 128.844801) (xy 147.533351 128.977188) (xy 147.533348 128.977192) (xy 147.429331 129.132861) + (xy 147.429327 129.13287) (xy 147.357676 129.30585) (xy 147.32115 129.489481) (xy 146.682149 129.489481) + (xy 146.645623 129.305849) (xy 146.573972 129.132869) (xy 146.57397 129.132867) (xy 146.573968 129.132861) + (xy 146.50156 129.024497) (xy 146.469952 128.977192) (xy 146.337558 128.844798) (xy 146.293209 128.815165) + (xy 146.181888 128.740781) (xy 146.181879 128.740777) (xy 146.008899 128.669126) (xy 145.825268 128.6326) + (xy 145.825266 128.6326) (xy 145.638034 128.6326) (xy 145.638031 128.6326) (xy 145.4544 128.669126) + (xy 145.28142 128.740777) (xy 145.281411 128.740781) (xy 145.125742 128.844798) (xy 145.125738 128.844801) + (xy 144.993351 128.977188) (xy 144.993348 128.977192) (xy 144.889331 129.132861) (xy 144.889327 129.13287) + (xy 144.817676 129.30585) (xy 144.78115 129.489481) (xy 144.142149 129.489481) (xy 144.105623 129.305849) + (xy 144.033972 129.132869) (xy 144.03397 129.132867) (xy 144.033968 129.132861) (xy 143.96156 129.024497) + (xy 143.929952 128.977192) (xy 143.797558 128.844798) (xy 143.753209 128.815165) (xy 143.641888 128.740781) + (xy 143.641879 128.740777) (xy 143.468899 128.669126) (xy 143.285268 128.6326) (xy 143.285266 128.6326) + (xy 143.098034 128.6326) (xy 143.098031 128.6326) (xy 142.9144 128.669126) (xy 142.74142 128.740777) + (xy 142.741411 128.740781) (xy 142.585742 128.844798) (xy 142.585738 128.844801) (xy 142.453351 128.977188) + (xy 142.453348 128.977192) (xy 142.349331 129.132861) (xy 142.349327 129.13287) (xy 142.277676 129.30585) + (xy 142.24115 129.489481) (xy 141.602149 129.489481) (xy 141.565623 129.305849) (xy 141.493972 129.132869) + (xy 141.49397 129.132867) (xy 141.493968 129.132861) (xy 141.42156 129.024497) (xy 141.389952 128.977192) + (xy 141.257558 128.844798) (xy 141.213209 128.815165) (xy 141.101888 128.740781) (xy 141.101879 128.740777) + (xy 140.928899 128.669126) (xy 140.745268 128.6326) (xy 140.745266 128.6326) (xy 140.558034 128.6326) + (xy 140.558031 128.6326) (xy 140.3744 128.669126) (xy 140.20142 128.740777) (xy 140.201411 128.740781) + (xy 140.045742 128.844798) (xy 140.045738 128.844801) (xy 139.913351 128.977188) (xy 139.913348 128.977192) + (xy 139.809331 129.132861) (xy 139.809327 129.13287) (xy 139.737676 129.30585) (xy 139.70115 129.489481) + (xy 139.062149 129.489481) (xy 139.025623 129.305849) (xy 138.953972 129.132869) (xy 138.95397 129.132867) + (xy 138.953968 129.132861) (xy 138.88156 129.024497) (xy 138.849952 128.977192) (xy 138.717558 128.844798) + (xy 138.673209 128.815165) (xy 138.561888 128.740781) (xy 138.561879 128.740777) (xy 138.388899 128.669126) + (xy 138.205268 128.6326) (xy 138.205266 128.6326) (xy 138.018034 128.6326) (xy 138.018031 128.6326) + (xy 137.8344 128.669126) (xy 137.66142 128.740777) (xy 137.661411 128.740781) (xy 137.505742 128.844798) + (xy 137.505738 128.844801) (xy 137.373351 128.977188) (xy 137.373348 128.977192) (xy 137.269331 129.132861) + (xy 137.269327 129.13287) (xy 137.197676 129.30585) (xy 137.16115 129.489481) (xy 133.982149 129.489481) + (xy 133.945623 129.305849) (xy 133.873972 129.132869) (xy 133.87397 129.132867) (xy 133.873968 129.132861) + (xy 133.80156 129.024497) (xy 133.769952 128.977192) (xy 133.637558 128.844798) (xy 133.593209 128.815165) + (xy 133.481888 128.740781) (xy 133.481879 128.740777) (xy 133.308899 128.669126) (xy 133.125268 128.6326) + (xy 133.125266 128.6326) (xy 132.938034 128.6326) (xy 132.938031 128.6326) (xy 132.7544 128.669126) + (xy 132.58142 128.740777) (xy 132.581411 128.740781) (xy 132.425742 128.844798) (xy 132.425738 128.844801) + (xy 132.293351 128.977188) (xy 132.293348 128.977192) (xy 132.189331 129.132861) (xy 132.189327 129.13287) + (xy 132.117676 129.30585) (xy 132.08115 129.489481) (xy 130.984203 129.489481) (xy 130.957575 129.390107) + (xy 130.924662 129.3331) (xy 131.768259 129.3331) (xy 131.768259 129.333099) (xy 131.75964 129.278685) (xy 131.696406 129.084072) (xy 131.603511 128.901753) (xy 131.483235 128.736208) (xy 131.338541 128.591514) (xy 131.172996 128.471238) (xy 130.990677 128.378343) (xy 130.796064 128.315109) (xy 130.74165 128.30649) (xy 130.74165 129.150088) (xy 130.684643 129.117175) (xy 130.557476 129.0831) (xy 130.425824 129.0831) @@ -42507,117 +47696,403 @@ (xy 129.500064 128.736208) (xy 129.379788 128.901753) (xy 129.30986 129.038997) (xy 129.266595 129.082262) (xy 129.206163 129.091833) (xy 129.151647 129.064056) (xy 129.13344 129.038997) (xy 129.063511 128.901753) (xy 128.943235 128.736208) (xy 128.798541 128.591514) (xy 128.632996 128.471238) (xy 128.450677 128.378343) - (xy 128.256062 128.315108) (xy 128.064379 128.284749) (xy 128.009862 128.256972) (xy 127.982085 128.202455) - (xy 127.991656 128.142023) (xy 128.009856 128.116971) (xy 138.353728 117.7731) (xy 145.44165 117.7731) - (xy 145.64265 117.7731) (xy 145.657562 117.777945) (xy 145.673243 117.777945) (xy 145.685928 117.787161) - (xy 145.700841 117.792007) (xy 145.710057 117.804692) (xy 145.722743 117.813909) (xy 145.727588 117.828821) - (xy 145.736805 117.841507) (xy 145.74165 117.8721) (xy 145.74165 117.9741) (xy 145.722743 118.032291) - (xy 145.673243 118.068255) (xy 145.64265 118.0731) (xy 145.44165 118.0731) (xy 145.44165 118.5731) - (xy 145.64265 118.5731) (xy 145.657562 118.577945) (xy 145.673243 118.577945) (xy 145.685928 118.587161) - (xy 145.700841 118.592007) (xy 145.710057 118.604692) (xy 145.722743 118.613909) (xy 145.727588 118.628821) - (xy 145.736805 118.641507) (xy 145.74165 118.6721) (xy 145.74165 118.7741) (xy 145.722743 118.832291) - (xy 145.673243 118.868255) (xy 145.64265 118.8731) (xy 145.44165 118.8731) (xy 145.44165 119.0731) - (xy 145.441651 119.0731) (xy 146.941649 119.0731) (xy 146.94165 119.0731) (xy 146.94165 118.8731) - (xy 146.941649 118.8731) (xy 146.74065 118.8731) (xy 146.725738 118.868255) (xy 146.710057 118.868255) - (xy 146.697371 118.859038) (xy 146.682459 118.854193) (xy 146.673242 118.841507) (xy 146.660557 118.832291) - (xy 146.655711 118.817378) (xy 146.646495 118.804693) (xy 146.64165 118.7741) (xy 146.64165 118.6721) - (xy 146.660557 118.613909) (xy 146.710057 118.577945) (xy 146.74065 118.5731) (xy 146.941649 118.5731) - (xy 146.94165 118.5731) (xy 146.94165 118.0731) (xy 146.941649 118.0731) (xy 146.74065 118.0731) - (xy 146.725738 118.068255) (xy 146.710057 118.068255) (xy 146.697371 118.059038) (xy 146.682459 118.054193) - (xy 146.673242 118.041507) (xy 146.660557 118.032291) (xy 146.655711 118.017378) (xy 146.646495 118.004693) - (xy 146.64165 117.9741) (xy 146.64165 117.8721) (xy 146.660557 117.813909) (xy 146.710057 117.777945) - (xy 146.74065 117.7731) (xy 146.941649 117.7731) (xy 146.94165 117.7731) (xy 146.94165 117.5731) - (xy 145.44165 117.5731) (xy 145.44165 117.7731) (xy 138.353728 117.7731) (xy 142.213432 113.913396) - (xy 142.267949 113.885619) (xy 142.283436 113.8844) (xy 169.040888 113.8844) (xy 169.099079 113.903307) - (xy 169.135043 113.952807) (xy 169.136317 114.001542) (xy 169.137597 114.001711) (xy 169.13675 114.008144) - (xy 169.13675 114.166257) (xy 169.137597 114.172691) (xy 169.136153 114.17288) (xy 169.133337 114.226582) - (xy 169.09483 114.274131) (xy 169.040914 114.2901) (xy 168.647004 114.2901) (xy 168.492354 114.320862) - (xy 168.492344 114.320865) (xy 168.464737 114.3323) (xy 168.464738 114.332301) (xy 168.346672 114.381205) - (xy 168.346663 114.381209) (xy 168.23486 114.455916) (xy 168.21556 114.468811) (xy 165.261153 117.423219) - (xy 165.206636 117.450996) (xy 165.146204 117.441425) (xy 165.102939 117.39816) (xy 165.092149 117.353215) - (xy 165.092149 116.678239) (xy 165.092149 116.678236) (xy 165.089235 116.653109) (xy 165.043856 116.550335) - (xy 164.964415 116.470894) (xy 164.861641 116.425515) (xy 164.86164 116.425514) (xy 164.861638 116.425514) - (xy 164.836518 116.4226) (xy 162.746789 116.4226) (xy 162.746786 116.422601) (xy 162.721659 116.425514) - (xy 162.618885 116.470894) (xy 162.539444 116.550335) (xy 162.494064 116.653111) (xy 162.49115 116.67823) - (xy 162.49115 119.96796) (xy 162.491151 119.967963) (xy 162.494064 119.99309) (xy 162.513562 120.037248) - (xy 162.539444 120.095865) (xy 162.618885 120.175306) (xy 162.721659 120.220685) (xy 162.746785 120.2236) - (xy 164.836514 120.223599) (xy 164.861641 120.220685) (xy 164.964415 120.175306) (xy 165.043856 120.095865) - (xy 165.089235 119.993091) (xy 165.09215 119.967965) (xy 165.09215 119.2226) (xy 165.111057 119.164409) - (xy 165.160557 119.128445) (xy 165.19115 119.1236) (xy 165.572191 119.1236) (xy 165.572192 119.1236) - (xy 165.726847 119.092837) (xy 165.872529 119.032494) (xy 166.003639 118.944889) (xy 169.028432 115.920096) - (xy 169.082949 115.892319) (xy 169.098436 115.8911) (xy 178.067668 115.8911) (xy 178.125859 115.910007) - (xy 178.161823 115.959507) (xy 178.165779 115.997553) (xy 178.166292 115.997581) (xy 178.16615 116.000228) - (xy 178.16615 116.645966) (xy 178.16615 116.645969) (xy 178.166151 116.645972) (xy 178.167153 116.655292) - (xy 178.172558 116.70558) (xy 178.172559 116.705585) (xy 178.222852 116.840429) (xy 178.3091 116.955641) - (xy 178.309104 116.955646) (xy 178.309107 116.955648) (xy 178.309108 116.955649) (xy 178.42432 117.041897) - (xy 178.559161 117.092189) (xy 178.559162 117.092189) (xy 178.559167 117.092191) (xy 178.618777 117.0986) - (xy 179.034748 117.098599) (xy 179.092939 117.117506) (xy 179.104752 117.127595) (xy 179.690637 117.71348) - (xy 179.690639 117.713481) (xy 179.69064 117.713482) (xy 179.690641 117.713483) (xy 179.781958 117.766205) - (xy 179.781956 117.766205) (xy 179.78196 117.766206) (xy 179.781962 117.766207) (xy 179.883823 117.7935) - (xy 179.989277 117.7935) (xy 185.849583 117.7935) (xy 185.907774 117.812407) (xy 185.943738 117.861907) - (xy 185.943738 117.923093) (xy 185.907774 117.972593) (xy 185.868897 117.989598) (xy 185.810253 118.001263) - (xy 185.810251 118.001263) (xy 185.664575 118.061603) (xy 185.664564 118.061609) (xy 185.533461 118.149211) - (xy 185.533457 118.149214) (xy 182.489068 121.193604) (xy 182.434551 121.221381) (xy 182.419064 121.2226) - (xy 180.948543 121.2226) (xy 180.860084 121.233223) (xy 180.71931 121.288737) (xy 180.719306 121.28874) - (xy 180.598731 121.380175) (xy 180.598725 121.380181) (xy 180.520438 121.483419) (xy 180.470211 121.518362) - (xy 180.441554 121.5226) (xy 177.665936 121.5226) (xy 177.607745 121.503693) (xy 177.595932 121.493604) - (xy 173.803642 117.701314) (xy 173.803639 117.701311) (xy 173.751409 117.666412) (xy 173.672535 117.613709) - (xy 173.672524 117.613703) (xy 173.526847 117.553363) (xy 173.372194 117.5226) (xy 173.372192 117.5226) - (xy 172.991149 117.5226) (xy 172.932958 117.503693) (xy 172.896994 117.454193) (xy 172.892149 117.4236) - (xy 172.892149 116.678239) (xy 172.892149 116.678236) (xy 172.889235 116.653109) (xy 172.843856 116.550335) - (xy 172.764415 116.470894) (xy 172.661641 116.425515) (xy 172.66164 116.425514) (xy 172.661638 116.425514) - (xy 172.636518 116.4226) (xy 170.546789 116.4226) (xy 170.546786 116.422601) (xy 170.521659 116.425514) - (xy 170.418885 116.470894) (xy 170.339444 116.550335) (xy 170.294064 116.653111) (xy 170.29115 116.67823) - (xy 170.29115 119.96796) (xy 170.291151 119.967963) (xy 170.294064 119.99309) (xy 170.313562 120.037248) - (xy 170.339444 120.095865) (xy 170.418885 120.175306) (xy 170.521659 120.220685) (xy 170.546785 120.2236) - (xy 172.636514 120.223599) (xy 172.661641 120.220685) (xy 172.764415 120.175306) (xy 172.843856 120.095865) - (xy 172.889235 119.993091) (xy 172.89215 119.967965) (xy 172.89215 119.292986) (xy 172.911057 119.234795) - (xy 172.960557 119.198831) (xy 173.021743 119.198831) (xy 173.061154 119.222982) (xy 176.671561 122.833389) - (xy 176.783061 122.944889) (xy 176.861226 122.997117) (xy 176.914164 123.03249) (xy 176.914175 123.032496) - (xy 176.967988 123.054785) (xy 177.059853 123.092837) (xy 177.214507 123.1236) (xy 177.214508 123.1236) - (xy 180.441554 123.1236) (xy 180.499745 123.142507) (xy 180.520436 123.162779) (xy 180.598728 123.266022) - (xy 180.719308 123.357461) (xy 180.719309 123.357461) (xy 180.71931 123.357462) (xy 180.789697 123.385219) - (xy 180.860086 123.412977) (xy 180.948548 123.4236) (xy 180.94855 123.4236) (xy 184.03475 123.4236) - (xy 184.034752 123.4236) (xy 184.123214 123.412977) (xy 184.263992 123.357461) (xy 184.384572 123.266022) - (xy 184.476011 123.145442) (xy 184.531527 123.004664) (xy 184.54215 122.916202) (xy 184.54215 122.573101) - (xy 185.641651 122.573101) (xy 185.641651 122.923086) (xy 185.652142 123.025787) (xy 185.652145 123.025799) - (xy 185.707293 123.192224) (xy 185.79933 123.34144) (xy 185.923309 123.465419) (xy 186.072525 123.557456) - (xy 186.238956 123.612606) (xy 186.341662 123.623099) (xy 187.641648 123.623099) (xy 187.64165 123.623098) - (xy 187.64165 122.573101) (xy 188.14165 122.573101) (xy 188.14165 123.623098) (xy 188.141651 123.623099) - (xy 189.441636 123.623099) (xy 189.544337 123.612607) (xy 189.544349 123.612604) (xy 189.710774 123.557456) - (xy 189.85999 123.465419) (xy 189.983969 123.34144) (xy 190.076006 123.192224) (xy 190.131156 123.025793) - (xy 190.14165 122.923087) (xy 190.14165 122.573101) (xy 190.141649 122.5731) (xy 188.141651 122.5731) - (xy 188.14165 122.573101) (xy 187.64165 122.573101) (xy 187.641649 122.5731) (xy 185.641652 122.5731) - (xy 185.641651 122.573101) (xy 184.54215 122.573101) (xy 184.54215 121.729998) (xy 184.541323 121.723112) - (xy 185.64165 121.723112) (xy 185.64165 122.073099) (xy 185.641651 122.0731) (xy 187.641649 122.0731) - (xy 187.64165 122.073099) (xy 187.64165 121.023101) (xy 188.14165 121.023101) (xy 188.14165 122.073099) - (xy 188.141651 122.0731) (xy 190.141648 122.0731) (xy 190.141649 122.073099) (xy 190.141649 121.723113) - (xy 190.131157 121.620412) (xy 190.131154 121.6204) (xy 190.076006 121.453975) (xy 189.983969 121.304759) - (xy 189.85999 121.18078) (xy 189.710774 121.088743) (xy 189.544343 121.033593) (xy 189.441637 121.0231) - (xy 188.141651 121.0231) (xy 188.14165 121.023101) (xy 187.64165 121.023101) (xy 187.641649 121.0231) - (xy 186.341663 121.0231) (xy 186.238962 121.033592) (xy 186.23895 121.033595) (xy 186.072525 121.088743) - (xy 185.923309 121.18078) (xy 185.79933 121.304759) (xy 185.707293 121.453975) (xy 185.652143 121.620406) - (xy 185.64165 121.723112) (xy 184.541323 121.723112) (xy 184.531527 121.641536) (xy 184.491363 121.539689) - (xy 184.487605 121.478623) (xy 184.513455 121.433371) (xy 186.346332 119.600496) (xy 186.400849 119.572719) - (xy 186.416336 119.5715) (xy 200.522591 119.5715) (xy 200.522592 119.5715) (xy 200.677247 119.540737) - (xy 200.822929 119.480394) (xy 200.954039 119.392789) (xy 201.773729 118.573099) (xy 208.714418 118.573099) - (xy 208.714419 118.5731) (xy 209.758638 118.5731) (xy 209.725725 118.630107) (xy 209.69165 118.757274) - (xy 209.69165 118.888926) (xy 209.725725 119.016093) (xy 209.758638 119.0731) (xy 208.714419 119.0731) - (xy 208.724891 119.139222) (xy 208.790554 119.341315) (xy 208.887025 119.530652) (xy 209.011927 119.702564) - (xy 209.162185 119.852822) (xy 209.334098 119.977724) (xy 209.366008 119.993983) (xy 209.409273 120.037248) - (xy 209.418844 120.09768) (xy 209.391067 120.152197) (xy 209.33655 120.179974) (xy 209.332869 120.180487) - (xy 209.310083 120.183223) (xy 209.16931 120.238737) (xy 209.169306 120.23874) (xy 209.048731 120.330175) - (xy 209.048725 120.330181) (xy 208.95729 120.450756) (xy 208.957287 120.45076) (xy 208.901773 120.591534) - (xy 208.89115 120.679993) (xy 208.89115 121.966206) (xy 208.901773 122.054665) (xy 208.957287 122.195439) - (xy 208.957288 122.195441) (xy 208.957289 122.195442) (xy 209.048728 122.316022) (xy 209.169308 122.407461) - (xy 209.169309 122.407461) (xy 209.16931 122.407462) (xy 209.239697 122.435219) (xy 209.310086 122.462977) - (xy 209.398548 122.4736) (xy 209.39855 122.4736) (xy 210.98475 122.4736) (xy 210.984752 122.4736) - (xy 211.073214 122.462977) (xy 211.213992 122.407461) (xy 211.334572 122.316022) (xy 211.426011 122.195442) - (xy 211.481527 122.054664) (xy 211.49215 121.966202) (xy 211.49215 120.679998) (xy 211.481527 120.591536) - (xy 211.426011 120.450758) (xy 211.334572 120.330178) (xy 211.213992 120.238739) (xy 211.213991 120.238738) - (xy 211.213989 120.238737) (xy 211.073216 120.183223) (xy 211.050431 120.180487) (xy 210.99491 120.154775) - (xy 210.965105 120.10134) (xy 210.972401 120.040591) (xy 211.014011 119.995733) (xy 211.017292 119.993983) - (xy 211.049199 119.977725) (xy 211.0492 119.977725) (xy 211.221114 119.852822) (xy 211.371372 119.702564) + (xy 128.256064 128.315109) (xy 128.20165 128.30649) (xy 128.20165 129.150088) (xy 128.144643 129.117175) + (xy 128.017476 129.0831) (xy 127.885824 129.0831) (xy 127.758657 129.117175) (xy 127.70165 129.150088) + (xy 127.70165 128.282349) (xy 127.700718 128.280829) (xy 127.70165 128.268987) (xy 127.70165 128.260851) + (xy 127.70229 128.260851) (xy 127.705519 128.219832) (xy 127.726974 128.187721) (xy 130.572955 125.34174) + (xy 160.7995 125.34174) (xy 160.7995 125.80826) (xy 160.802012 125.8255) (xy 160.809427 125.876395) + (xy 160.850539 125.960489) (xy 160.860802 125.981483) (xy 160.943517 126.064198) (xy 160.997285 126.090483) + (xy 161.048604 126.115572) (xy 161.048605 126.115572) (xy 161.048607 126.115573) (xy 161.11674 126.1255) + (xy 161.580231 126.1255) (xy 161.638422 126.144407) (xy 161.650235 126.154496) (xy 162.595504 127.099764) + (xy 162.623281 127.154281) (xy 162.6245 127.169768) (xy 162.6245 128.93454) (xy 162.605593 128.992731) + (xy 162.59156 129.008277) (xy 162.583902 129.015137) (xy 162.567686 129.0245) (xy 162.518076 129.074109) + (xy 162.51606 129.075916) (xy 162.490445 129.087243) (xy 162.465487 129.09996) (xy 162.46269 129.099517) + (xy 162.460102 129.100662) (xy 162.432727 129.094771) (xy 162.405055 129.090389) (xy 162.401981 129.088155) + (xy 162.400286 129.087791) (xy 162.398061 129.085308) (xy 162.379999 129.072185) (xy 162.332314 129.0245) + (xy 162.332311 129.024498) (xy 162.332309 129.024496) (xy 162.218189 128.958609) (xy 162.218191 128.958609) + (xy 162.156114 128.941976) (xy 162.090892 128.9245) (xy 161.959108 128.9245) (xy 161.893886 128.941976) + (xy 161.831809 128.958609) (xy 161.71769 129.024496) (xy 161.624496 129.11769) (xy 161.558609 129.231809) + (xy 161.546049 129.278685) (xy 161.5245 129.359108) (xy 161.5245 129.490892) (xy 161.547858 129.578065) + (xy 161.558609 129.61819) (xy 161.624496 129.732309) (xy 161.624498 129.732311) (xy 161.6245 129.732314) + (xy 161.717686 129.8255) (xy 161.717688 129.825501) (xy 161.71769 129.825503) (xy 161.83181 129.89139) + (xy 161.831808 129.89139) (xy 161.831812 129.891391) (xy 161.831814 129.891392) (xy 161.959108 129.9255) + (xy 161.95911 129.9255) (xy 162.09089 129.9255) (xy 162.090892 129.9255) (xy 162.218186 129.891392) + (xy 162.218188 129.89139) (xy 162.21819 129.89139) (xy 162.332309 129.825503) (xy 162.332309 129.825502) + (xy 162.332314 129.8255) (xy 162.379998 129.777815) (xy 162.434513 129.75004) (xy 162.494945 129.759611) + (xy 162.52 129.777814) (xy 162.567686 129.8255) (xy 162.567688 129.825501) (xy 162.56769 129.825503) + (xy 162.68181 129.89139) (xy 162.681808 129.89139) (xy 162.681812 129.891391) (xy 162.681814 129.891392) + (xy 162.809108 129.9255) (xy 162.80911 129.9255) (xy 162.94089 129.9255) (xy 162.940892 129.9255) + (xy 163.068186 129.891392) (xy 163.068188 129.89139) (xy 163.06819 129.89139) (xy 163.182309 129.825503) + (xy 163.182309 129.825502) (xy 163.182314 129.8255) (xy 163.229998 129.777815) (xy 163.284513 129.75004) + (xy 163.344945 129.759611) (xy 163.37 129.777814) (xy 163.417686 129.8255) (xy 163.417688 129.825501) + (xy 163.41769 129.825503) (xy 163.53181 129.89139) (xy 163.531811 129.89139) (xy 163.531814 129.891392) + (xy 163.581754 129.904773) (xy 163.626135 129.930396) (xy 163.801235 130.105496) (xy 163.829012 130.160013) + (xy 163.819441 130.220445) (xy 163.776176 130.26371) (xy 163.731231 130.2745) (xy 163.659108 130.2745) + (xy 163.593886 130.291976) (xy 163.531809 130.308609) (xy 163.41769 130.374496) (xy 163.417689 130.374497) + (xy 163.417686 130.374499) (xy 163.417686 130.3745) (xy 163.370001 130.422184) (xy 163.315487 130.44996) + (xy 163.255055 130.440389) (xy 163.229999 130.422185) (xy 163.182314 130.3745) (xy 163.182311 130.374498) + (xy 163.182309 130.374496) (xy 163.068189 130.308609) (xy 163.068191 130.308609) (xy 163.006114 130.291976) + (xy 162.940892 130.2745) (xy 162.809108 130.2745) (xy 162.743886 130.291976) (xy 162.681809 130.308609) + (xy 162.56769 130.374496) (xy 162.567689 130.374497) (xy 162.567686 130.374499) (xy 162.567686 130.3745) + (xy 162.520001 130.422184) (xy 162.465487 130.44996) (xy 162.405055 130.440389) (xy 162.379999 130.422185) + (xy 162.332314 130.3745) (xy 162.332311 130.374498) (xy 162.332309 130.374496) (xy 162.218189 130.308609) + (xy 162.218191 130.308609) (xy 162.156114 130.291976) (xy 162.090892 130.2745) (xy 161.959108 130.2745) + (xy 161.893886 130.291976) (xy 161.831809 130.308609) (xy 161.71769 130.374496) (xy 161.624496 130.46769) + (xy 161.558609 130.581809) (xy 161.558608 130.581814) (xy 161.5245 130.709108) (xy 161.5245 130.840892) + (xy 161.552275 130.944552) (xy 161.558609 130.96819) (xy 161.624496 131.082309) (xy 161.624498 131.082311) + (xy 161.6245 131.082314) (xy 161.717686 131.1755) (xy 161.717688 131.175501) (xy 161.71769 131.175503) + (xy 161.83181 131.24139) (xy 161.831808 131.24139) (xy 161.831812 131.241391) (xy 161.831814 131.241392) + (xy 161.959108 131.2755) (xy 161.95911 131.2755) (xy 162.09089 131.2755) (xy 162.090892 131.2755) + (xy 162.218186 131.241392) (xy 162.218188 131.24139) (xy 162.21819 131.24139) (xy 162.332309 131.175503) + (xy 162.332309 131.175502) (xy 162.332314 131.1755) (xy 162.379998 131.127815) (xy 162.434513 131.10004) + (xy 162.494945 131.109611) (xy 162.52 131.127814) (xy 162.567686 131.1755) (xy 162.567688 131.175501) + (xy 162.56769 131.175503) (xy 162.68181 131.24139) (xy 162.681808 131.24139) (xy 162.681812 131.241391) + (xy 162.681814 131.241392) (xy 162.809108 131.2755) (xy 162.80911 131.2755) (xy 162.94089 131.2755) + (xy 162.940892 131.2755) (xy 163.068186 131.241392) (xy 163.068188 131.24139) (xy 163.06819 131.24139) + (xy 163.182309 131.175503) (xy 163.182309 131.175502) (xy 163.182314 131.1755) (xy 163.229998 131.127815) + (xy 163.284513 131.10004) (xy 163.344945 131.109611) (xy 163.37 131.127814) (xy 163.417686 131.1755) + (xy 163.417688 131.175501) (xy 163.41769 131.175503) (xy 163.53181 131.24139) (xy 163.531808 131.24139) + (xy 163.531812 131.241391) (xy 163.531814 131.241392) (xy 163.659108 131.2755) (xy 163.65911 131.2755) + (xy 163.79089 131.2755) (xy 163.790892 131.2755) (xy 163.918186 131.241392) (xy 163.918188 131.24139) + (xy 163.91819 131.24139) (xy 164.032309 131.175503) (xy 164.032309 131.175502) (xy 164.032314 131.1755) + (xy 164.079998 131.127815) (xy 164.134513 131.10004) (xy 164.194945 131.109611) (xy 164.22 131.127814) + (xy 164.267686 131.1755) (xy 164.267688 131.175501) (xy 164.26769 131.175503) (xy 164.38181 131.24139) + (xy 164.381808 131.24139) (xy 164.381812 131.241391) (xy 164.381814 131.241392) (xy 164.509108 131.2755) + (xy 164.50911 131.2755) (xy 164.64089 131.2755) (xy 164.640892 131.2755) (xy 164.768186 131.241392) + (xy 164.768188 131.24139) (xy 164.76819 131.24139) (xy 164.882309 131.175503) (xy 164.882309 131.175502) + (xy 164.882314 131.1755) (xy 164.929998 131.127815) (xy 164.984513 131.10004) (xy 165.044945 131.109611) + (xy 165.07 131.127814) (xy 165.117686 131.1755) (xy 165.117688 131.175501) (xy 165.11769 131.175503) + (xy 165.23181 131.24139) (xy 165.231808 131.24139) (xy 165.231812 131.241391) (xy 165.231814 131.241392) + (xy 165.359108 131.2755) (xy 165.35911 131.2755) (xy 165.49089 131.2755) (xy 165.490892 131.2755) + (xy 165.618186 131.241392) (xy 165.618188 131.24139) (xy 165.61819 131.24139) (xy 165.732309 131.175503) + (xy 165.732309 131.175502) (xy 165.732314 131.1755) (xy 165.779998 131.127815) (xy 165.834513 131.10004) + (xy 165.894945 131.109611) (xy 165.92 131.127814) (xy 165.967686 131.1755) (xy 165.967688 131.175501) + (xy 165.96769 131.175503) (xy 166.08181 131.24139) (xy 166.081808 131.24139) (xy 166.081812 131.241391) + (xy 166.081814 131.241392) (xy 166.209108 131.2755) (xy 166.20911 131.2755) (xy 166.34089 131.2755) + (xy 166.340892 131.2755) (xy 166.468186 131.241392) (xy 166.468188 131.24139) (xy 166.46819 131.24139) + (xy 166.582309 131.175503) (xy 166.582309 131.175502) (xy 166.582314 131.1755) (xy 166.6755 131.082314) + (xy 166.675503 131.082309) (xy 166.74139 130.96819) (xy 166.74139 130.968188) (xy 166.741392 130.968186) + (xy 166.7755 130.840892) (xy 166.7755 130.735218) (xy 166.925 130.735218) (xy 166.925 130.814782) + (xy 166.955448 130.888291) (xy 167.011709 130.944552) (xy 167.085218 130.975) (xy 167.164782 130.975) + (xy 167.238291 130.944552) (xy 167.294552 130.888291) (xy 167.325 130.814782) (xy 167.325 130.735218) + (xy 167.294552 130.661709) (xy 167.238291 130.605448) (xy 167.164782 130.575) (xy 167.085218 130.575) + (xy 167.011709 130.605448) (xy 166.955448 130.661709) (xy 166.925 130.735218) (xy 166.7755 130.735218) + (xy 166.7755 130.709108) (xy 166.741392 130.581814) (xy 166.74139 130.581811) (xy 166.74139 130.581809) + (xy 166.675503 130.46769) (xy 166.675501 130.467688) (xy 166.6755 130.467686) (xy 166.582314 130.3745) + (xy 166.582311 130.374498) (xy 166.582309 130.374496) (xy 166.468189 130.308609) (xy 166.468191 130.308609) + (xy 166.406114 130.291976) (xy 166.340892 130.2745) (xy 166.209108 130.2745) (xy 166.143886 130.291976) + (xy 166.081809 130.308609) (xy 165.96769 130.374496) (xy 165.967689 130.374497) (xy 165.967686 130.374499) + (xy 165.967686 130.3745) (xy 165.920001 130.422184) (xy 165.865487 130.44996) (xy 165.805055 130.440389) + (xy 165.779999 130.422185) (xy 165.732314 130.3745) (xy 165.732311 130.374498) (xy 165.732309 130.374496) + (xy 165.618189 130.308609) (xy 165.618191 130.308609) (xy 165.556114 130.291976) (xy 165.490892 130.2745) + (xy 165.359108 130.2745) (xy 165.293886 130.291976) (xy 165.231809 130.308609) (xy 165.11769 130.374496) + (xy 165.117689 130.374497) (xy 165.117686 130.374499) (xy 165.117686 130.3745) (xy 165.070001 130.422184) + (xy 165.015487 130.44996) (xy 164.955055 130.440389) (xy 164.929999 130.422185) (xy 164.882314 130.3745) + (xy 164.882311 130.374498) (xy 164.882309 130.374496) (xy 164.768189 130.308609) (xy 164.768185 130.308607) + (xy 164.718243 130.295225) (xy 164.673863 130.269603) (xy 164.50426 130.1) (xy 166.803555 130.1) + (xy 167.125 130.421445) (xy 167.446445 130.1) (xy 167.125 129.778555) (xy 166.803555 130.1) (xy 164.50426 130.1) + (xy 164.498764 130.094504) (xy 164.470987 130.039987) (xy 164.480558 129.979555) (xy 164.523823 129.93629) + (xy 164.568768 129.9255) (xy 164.64089 129.9255) (xy 164.640892 129.9255) (xy 164.768186 129.891392) + (xy 164.768188 129.89139) (xy 164.76819 129.89139) (xy 164.882309 129.825503) (xy 164.882309 129.825502) + (xy 164.882314 129.8255) (xy 164.929998 129.777815) (xy 164.984513 129.75004) (xy 165.044945 129.759611) + (xy 165.07 129.777814) (xy 165.117686 129.8255) (xy 165.117688 129.825501) (xy 165.11769 129.825503) + (xy 165.23181 129.89139) (xy 165.231808 129.89139) (xy 165.231812 129.891391) (xy 165.231814 129.891392) + (xy 165.359108 129.9255) (xy 165.35911 129.9255) (xy 165.49089 129.9255) (xy 165.490892 129.9255) + (xy 165.618186 129.891392) (xy 165.618188 129.89139) (xy 165.61819 129.89139) (xy 165.732309 129.825503) + (xy 165.732309 129.825502) (xy 165.732314 129.8255) (xy 165.779998 129.777815) (xy 165.834513 129.75004) + (xy 165.894945 129.759611) (xy 165.92 129.777814) (xy 165.967686 129.8255) (xy 165.967688 129.825501) + (xy 165.96769 129.825503) (xy 166.08181 129.89139) (xy 166.081808 129.89139) (xy 166.081812 129.891391) + (xy 166.081814 129.891392) (xy 166.209108 129.9255) (xy 166.20911 129.9255) (xy 166.34089 129.9255) + (xy 166.340892 129.9255) (xy 166.468186 129.891392) (xy 166.468188 129.89139) (xy 166.46819 129.89139) + (xy 166.582309 129.825503) (xy 166.582309 129.825502) (xy 166.582314 129.8255) (xy 166.6755 129.732314) + (xy 166.679554 129.725292) (xy 166.74139 129.61819) (xy 166.74139 129.618188) (xy 166.741392 129.618186) + (xy 166.7755 129.490892) (xy 166.7755 129.385218) (xy 166.925 129.385218) (xy 166.925 129.464782) + (xy 166.955448 129.538291) (xy 167.011709 129.594552) (xy 167.085218 129.625) (xy 167.164782 129.625) + (xy 167.238291 129.594552) (xy 167.294552 129.538291) (xy 167.325 129.464782) (xy 167.325 129.385218) + (xy 167.294552 129.311709) (xy 167.238291 129.255448) (xy 167.164782 129.225) (xy 167.085218 129.225) + (xy 167.011709 129.255448) (xy 166.955448 129.311709) (xy 166.925 129.385218) (xy 166.7755 129.385218) + (xy 166.7755 129.359108) (xy 166.741392 129.231814) (xy 166.74139 129.231811) (xy 166.74139 129.231809) + (xy 166.675503 129.11769) (xy 166.675501 129.117688) (xy 166.6755 129.117686) (xy 166.582314 129.0245) + (xy 166.582311 129.024498) (xy 166.582309 129.024496) (xy 166.468189 128.958609) (xy 166.468191 128.958609) + (xy 166.406114 128.941976) (xy 166.340892 128.9245) (xy 166.209108 128.9245) (xy 166.143886 128.941976) + (xy 166.081809 128.958609) (xy 165.96769 129.024496) (xy 165.967689 129.024497) (xy 165.967686 129.024499) + (xy 165.967686 129.0245) (xy 165.920001 129.072184) (xy 165.865487 129.09996) (xy 165.805055 129.090389) + (xy 165.779999 129.072185) (xy 165.732314 129.0245) (xy 165.732311 129.024498) (xy 165.732309 129.024496) + (xy 165.618189 128.958609) (xy 165.618191 128.958609) (xy 165.556114 128.941976) (xy 165.490892 128.9245) + (xy 165.359108 128.9245) (xy 165.293886 128.941976) (xy 165.231809 128.958609) (xy 165.11769 129.024496) + (xy 165.117689 129.024497) (xy 165.117686 129.024499) (xy 165.117686 129.0245) (xy 165.070001 129.072184) + (xy 165.015487 129.09996) (xy 164.955055 129.090389) (xy 164.929999 129.072185) (xy 164.882314 129.0245) + (xy 164.882311 129.024498) (xy 164.882309 129.024496) (xy 164.768189 128.958609) (xy 164.768191 128.958609) + (xy 164.706114 128.941976) (xy 164.640892 128.9245) (xy 164.509108 128.9245) (xy 164.443886 128.941976) + (xy 164.381809 128.958609) (xy 164.26769 129.024496) (xy 164.267689 129.024497) (xy 164.267686 129.024499) + (xy 164.267686 129.0245) (xy 164.220001 129.072184) (xy 164.165487 129.09996) (xy 164.105055 129.090389) + (xy 164.079999 129.072185) (xy 164.032314 129.0245) (xy 164.032311 129.024498) (xy 164.032309 129.024496) + (xy 163.918189 128.958609) (xy 163.918191 128.958609) (xy 163.856114 128.941976) (xy 163.790892 128.9245) + (xy 163.659108 128.9245) (xy 163.593886 128.941976) (xy 163.531809 128.958609) (xy 163.41769 129.024496) + (xy 163.417689 129.024497) (xy 163.417686 129.024499) (xy 163.417686 129.0245) (xy 163.370001 129.072184) + (xy 163.3584 129.078095) (xy 163.349714 129.087791) (xy 163.331809 129.091643) (xy 163.315487 129.09996) + (xy 163.302626 129.097923) (xy 163.289898 129.100662) (xy 163.274901 129.093532) (xy 163.255055 129.090389) + (xy 163.23394 129.075916) (xy 163.231923 129.074109) (xy 163.182314 129.0245) (xy 163.166097 129.015137) + (xy 163.15844 129.008277) (xy 163.147985 128.990272) (xy 163.134058 128.974804) (xy 163.131203 128.961373) + (xy 163.127715 128.955366) (xy 163.128434 128.948347) (xy 163.1255 128.93454) (xy 163.1255 128.670883) + (xy 166.724438 128.670883) (xy 167.125 129.071445) (xy 167.52556 128.670884) (xy 167.52556 128.670883) + (xy 167.372936 128.607665) (xy 167.20872 128.575) (xy 167.041279 128.575) (xy 166.877064 128.607665) + (xy 166.877062 128.607665) (xy 166.724438 128.670883) (xy 163.1255 128.670883) (xy 163.1255 127.086359) + (xy 163.125501 127.08635) (xy 163.125501 126.975173) (xy 163.093885 126.898847) (xy 163.087364 126.883104) + (xy 163.087364 126.883103) (xy 163.016897 126.812636) (xy 163.016895 126.812635) (xy 162.079496 125.875235) + (xy 162.051719 125.820718) (xy 162.0505 125.805231) (xy 162.0505 125.341743) (xy 162.0505 125.34174) + (xy 164.7745 125.34174) (xy 164.7745 125.80826) (xy 164.777012 125.8255) (xy 164.784427 125.876395) + (xy 164.825539 125.960489) (xy 164.835802 125.981483) (xy 164.918517 126.064198) (xy 164.972285 126.090483) + (xy 165.023604 126.115572) (xy 165.023605 126.115572) (xy 165.023607 126.115573) (xy 165.09174 126.1255) + (xy 165.091743 126.1255) (xy 165.708257 126.1255) (xy 165.70826 126.1255) (xy 165.776393 126.115573) + (xy 165.881483 126.064198) (xy 165.964198 125.981483) (xy 166.013311 125.881019) (xy 166.055854 125.837046) + (xy 166.102252 125.8255) (xy 167.052844 125.8255) (xy 167.111035 125.844407) (xy 167.135465 125.871541) + (xy 167.135562 125.871467) (xy 167.136505 125.872696) (xy 167.13858 125.875001) (xy 167.139511 125.876613) + (xy 167.223387 125.960489) (xy 167.223389 125.96049) (xy 167.223391 125.960492) (xy 167.32611 126.019797) + (xy 167.326111 126.019797) (xy 167.326114 126.019799) (xy 167.440691 126.0505) (xy 167.440693 126.0505) + (xy 167.559307 126.0505) (xy 167.559309 126.0505) (xy 167.673886 126.019799) (xy 167.673888 126.019797) + (xy 167.67389 126.019797) (xy 167.776608 125.960492) (xy 167.776608 125.960491) (xy 167.776613 125.960489) + (xy 167.860489 125.876613) (xy 167.883333 125.837046) (xy 167.919797 125.77389) (xy 167.919797 125.773888) + (xy 167.919799 125.773886) (xy 167.9505 125.659309) (xy 167.9505 125.540691) (xy 167.919799 125.426114) + (xy 167.919797 125.426111) (xy 167.919797 125.426109) (xy 167.860492 125.323391) (xy 167.86049 125.323389) + (xy 167.860489 125.323387) (xy 167.776613 125.239511) (xy 167.77661 125.239509) (xy 167.776608 125.239507) + (xy 167.673889 125.180202) (xy 167.67389 125.180202) (xy 167.660351 125.176574) (xy 167.559309 125.1495) + (xy 167.440691 125.1495) (xy 167.370567 125.168289) (xy 167.326109 125.180202) (xy 167.223391 125.239507) + (xy 167.22339 125.239508) (xy 167.223387 125.23951) (xy 167.223387 125.239511) (xy 167.167392 125.295505) + (xy 167.112878 125.323281) (xy 167.097391 125.3245) (xy 166.102252 125.3245) (xy 166.044061 125.305593) + (xy 166.013311 125.26898) (xy 165.964198 125.168517) (xy 165.881483 125.085802) (xy 165.881481 125.085801) + (xy 165.776395 125.034427) (xy 165.749139 125.030456) (xy 165.70826 125.0245) (xy 165.09174 125.0245) + (xy 165.057673 125.029463) (xy 165.023604 125.034427) (xy 164.918518 125.085801) (xy 164.835801 125.168518) + (xy 164.784427 125.273604) (xy 164.779767 125.305593) (xy 164.7745 125.34174) (xy 162.0505 125.34174) + (xy 162.047988 125.3245) (xy 162.040573 125.273607) (xy 161.989198 125.168517) (xy 161.906483 125.085802) + (xy 161.906481 125.085801) (xy 161.801395 125.034427) (xy 161.774139 125.030456) (xy 161.73326 125.0245) + (xy 161.11674 125.0245) (xy 161.082673 125.029463) (xy 161.048604 125.034427) (xy 160.943518 125.085801) + (xy 160.860801 125.168518) (xy 160.809427 125.273604) (xy 160.804767 125.305593) (xy 160.7995 125.34174) + (xy 130.572955 125.34174) (xy 131.739694 124.175001) (xy 160.450001 124.175001) (xy 160.450001 124.181582) + (xy 160.456408 124.252103) (xy 160.45641 124.252109) (xy 160.506979 124.414392) (xy 160.506982 124.4144) + (xy 160.594924 124.559872) (xy 160.715127 124.680075) (xy 160.860599 124.768017) (xy 160.860607 124.76802) + (xy 161.022889 124.818589) (xy 161.022895 124.818591) (xy 161.093424 124.824999) (xy 161.174999 124.824998) + (xy 161.175 124.824998) (xy 161.175 124.175001) (xy 161.675 124.175001) (xy 161.675 124.824998) + (xy 161.675001 124.824999) (xy 161.756566 124.824999) (xy 161.756582 124.824998) (xy 161.827103 124.818591) + (xy 161.827109 124.818589) (xy 161.989392 124.76802) (xy 161.9894 124.768017) (xy 162.134872 124.680075) + (xy 162.255075 124.559872) (xy 162.343017 124.4144) (xy 162.34302 124.414392) (xy 162.393589 124.25211) + (xy 162.393591 124.252104) (xy 162.399999 124.181581) (xy 162.4 124.181568) (xy 162.4 124.175001) + (xy 164.425001 124.175001) (xy 164.425001 124.181582) (xy 164.431408 124.252103) (xy 164.43141 124.252109) + (xy 164.481979 124.414392) (xy 164.481982 124.4144) (xy 164.569924 124.559872) (xy 164.690127 124.680075) + (xy 164.835599 124.768017) (xy 164.835607 124.76802) (xy 164.997889 124.818589) (xy 164.997895 124.818591) + (xy 165.068424 124.824999) (xy 165.149999 124.824998) (xy 165.15 124.824998) (xy 165.15 124.175001) + (xy 165.65 124.175001) (xy 165.65 124.824998) (xy 165.650001 124.824999) (xy 165.731566 124.824999) + (xy 165.731582 124.824998) (xy 165.802103 124.818591) (xy 165.802109 124.818589) (xy 165.964392 124.76802) + (xy 165.9644 124.768017) (xy 166.109872 124.680075) (xy 166.230075 124.559872) (xy 166.318017 124.4144) + (xy 166.31802 124.414392) (xy 166.368589 124.25211) (xy 166.368591 124.252104) (xy 166.374999 124.181581) + (xy 166.375 124.181568) (xy 166.375 124.175001) (xy 166.374999 124.175) (xy 165.650001 124.175) + (xy 165.65 124.175001) (xy 165.15 124.175001) (xy 165.149999 124.175) (xy 164.425002 124.175) (xy 164.425001 124.175001) + (xy 162.4 124.175001) (xy 162.399999 124.175) (xy 161.675001 124.175) (xy 161.675 124.175001) (xy 161.175 124.175001) + (xy 161.174999 124.175) (xy 160.450002 124.175) (xy 160.450001 124.175001) (xy 131.739694 124.175001) + (xy 132.246277 123.668418) (xy 160.45 123.668418) (xy 160.45 123.674999) (xy 160.450001 123.675) + (xy 161.174999 123.675) (xy 161.175 123.674999) (xy 161.175 123.025001) (xy 161.675 123.025001) + (xy 161.675 123.674999) (xy 161.675001 123.675) (xy 162.399998 123.675) (xy 162.399999 123.674999) + (xy 162.399999 123.668434) (xy 162.399998 123.668418) (xy 164.425 123.668418) (xy 164.425 123.674999) + (xy 164.425001 123.675) (xy 165.149999 123.675) (xy 165.15 123.674999) (xy 165.15 123.025001) (xy 165.65 123.025001) + (xy 165.65 123.674999) (xy 165.650001 123.675) (xy 166.374998 123.675) (xy 166.374999 123.674999) + (xy 166.374999 123.668433) (xy 166.374998 123.668417) (xy 166.368591 123.597896) (xy 166.368589 123.59789) + (xy 166.31802 123.435607) (xy 166.318017 123.435599) (xy 166.230075 123.290127) (xy 166.109872 123.169924) + (xy 165.9644 123.081982) (xy 165.964392 123.081979) (xy 165.80211 123.03141) (xy 165.802104 123.031408) + (xy 165.731581 123.025) (xy 165.650001 123.025) (xy 165.65 123.025001) (xy 165.15 123.025001) (xy 165.149998 123.024999) + (xy 165.068434 123.025) (xy 165.068417 123.025001) (xy 164.997896 123.031408) (xy 164.99789 123.03141) + (xy 164.835607 123.081979) (xy 164.835599 123.081982) (xy 164.690127 123.169924) (xy 164.569924 123.290127) + (xy 164.481982 123.435599) (xy 164.481979 123.435607) (xy 164.43141 123.597889) (xy 164.431408 123.597895) + (xy 164.425 123.668418) (xy 162.399998 123.668418) (xy 162.399998 123.668417) (xy 162.393591 123.597896) + (xy 162.393589 123.59789) (xy 162.34302 123.435607) (xy 162.343017 123.435599) (xy 162.255075 123.290127) + (xy 162.134872 123.169924) (xy 161.9894 123.081982) (xy 161.989392 123.081979) (xy 161.82711 123.03141) + (xy 161.827104 123.031408) (xy 161.756581 123.025) (xy 161.675001 123.025) (xy 161.675 123.025001) + (xy 161.175 123.025001) (xy 161.174998 123.024999) (xy 161.093434 123.025) (xy 161.093417 123.025001) + (xy 161.022896 123.031408) (xy 161.02289 123.03141) (xy 160.860607 123.081979) (xy 160.860599 123.081982) + (xy 160.715127 123.169924) (xy 160.594924 123.290127) (xy 160.506982 123.435599) (xy 160.506979 123.435607) + (xy 160.45641 123.597889) (xy 160.456408 123.597895) (xy 160.45 123.668418) (xy 132.246277 123.668418) + (xy 138.141596 117.7731) (xy 145.44165 117.7731) (xy 145.64265 117.7731) (xy 145.657562 117.777945) + (xy 145.673243 117.777945) (xy 145.685928 117.787161) (xy 145.700841 117.792007) (xy 145.710057 117.804692) + (xy 145.722743 117.813909) (xy 145.727588 117.828821) (xy 145.736805 117.841507) (xy 145.74165 117.8721) + (xy 145.74165 117.9741) (xy 145.722743 118.032291) (xy 145.673243 118.068255) (xy 145.64265 118.0731) + (xy 145.44165 118.0731) (xy 145.44165 118.5731) (xy 145.64265 118.5731) (xy 145.657562 118.577945) + (xy 145.673243 118.577945) (xy 145.685928 118.587161) (xy 145.700841 118.592007) (xy 145.710057 118.604692) + (xy 145.722743 118.613909) (xy 145.727588 118.628821) (xy 145.736805 118.641507) (xy 145.74165 118.6721) + (xy 145.74165 118.7741) (xy 145.722743 118.832291) (xy 145.673243 118.868255) (xy 145.64265 118.8731) + (xy 145.44165 118.8731) (xy 145.44165 119.0731) (xy 145.441651 119.0731) (xy 146.941649 119.0731) + (xy 146.94165 119.0731) (xy 146.94165 118.8731) (xy 146.941649 118.8731) (xy 146.74065 118.8731) + (xy 146.725738 118.868255) (xy 146.710057 118.868255) (xy 146.697371 118.859038) (xy 146.682459 118.854193) + (xy 146.673242 118.841507) (xy 146.660557 118.832291) (xy 146.655711 118.817378) (xy 146.646495 118.804693) + (xy 146.64165 118.7741) (xy 146.64165 118.6721) (xy 146.660557 118.613909) (xy 146.710057 118.577945) + (xy 146.74065 118.5731) (xy 146.941649 118.5731) (xy 146.94165 118.5731) (xy 146.94165 118.0731) + (xy 146.941649 118.0731) (xy 146.74065 118.0731) (xy 146.725738 118.068255) (xy 146.710057 118.068255) + (xy 146.697371 118.059038) (xy 146.682459 118.054193) (xy 146.673242 118.041507) (xy 146.660557 118.032291) + (xy 146.655711 118.017378) (xy 146.646495 118.004693) (xy 146.64165 117.9741) (xy 146.64165 117.8721) + (xy 146.660557 117.813909) (xy 146.710057 117.777945) (xy 146.74065 117.7731) (xy 146.941649 117.7731) + (xy 146.94165 117.7731) (xy 146.94165 117.5731) (xy 145.44165 117.5731) (xy 145.44165 117.7731) + (xy 138.141596 117.7731) (xy 142.1513 113.763396) (xy 142.205817 113.735619) (xy 142.221304 113.7344) + (xy 169.249274 113.7344) (xy 169.307465 113.753307) (xy 169.343429 113.802807) (xy 169.343429 113.863993) + (xy 169.33501 113.882901) (xy 169.317452 113.913311) (xy 169.317451 113.913313) (xy 169.317451 113.913314) + (xy 169.28675 114.027891) (xy 169.28675 114.146509) (xy 169.317451 114.261086) (xy 169.317452 114.261088) + (xy 169.335068 114.291599) (xy 169.34779 114.351447) (xy 169.322904 114.407343) (xy 169.269916 114.437936) + (xy 169.249332 114.4401) (xy 168.661778 114.4401) (xy 168.555636 114.461214) (xy 168.555635 114.461213) + (xy 168.536112 114.465097) (xy 168.536104 114.465099) (xy 168.417725 114.514133) (xy 168.311183 114.585321) + (xy 165.2529 117.643604) (xy 165.245782 117.64723) (xy 165.241087 117.653693) (xy 165.219038 117.660856) + (xy 165.198383 117.671381) (xy 165.182896 117.6726) (xy 165.04115 117.6726) (xy 164.982959 117.653693) + (xy 164.946995 117.604193) (xy 164.94215 117.5736) (xy 164.94215 116.708281) (xy 164.942149 116.708272) + (xy 164.933417 116.664379) (xy 164.933415 116.664375) (xy 164.911355 116.63136) (xy 164.900154 116.614596) + (xy 164.883347 116.603366) (xy 164.850374 116.581334) (xy 164.85037 116.581332) (xy 164.806477 116.5726) + (xy 164.80647 116.5726) (xy 162.77683 116.5726) (xy 162.776822 116.5726) (xy 162.732929 116.581332) + (xy 162.732925 116.581334) (xy 162.683148 116.614594) (xy 162.683144 116.614598) (xy 162.649884 116.664375) + (xy 162.649882 116.664379) (xy 162.64115 116.708272) (xy 162.64115 119.937927) (xy 162.649882 119.98182) + (xy 162.649883 119.981822) (xy 162.683146 120.031604) (xy 162.732928 120.064867) (xy 162.743977 120.067064) + (xy 162.776822 120.073599) (xy 162.776828 120.073599) (xy 162.77683 120.0736) (xy 162.776831 120.0736) + (xy 164.806469 120.0736) (xy 164.80647 120.0736) (xy 164.806471 120.073599) (xy 164.806477 120.073599) + (xy 164.828273 120.069262) (xy 164.850372 120.064867) (xy 164.900154 120.031604) (xy 164.933417 119.981822) + (xy 164.94215 119.93792) (xy 164.94215 119.0726) (xy 164.961057 119.014409) (xy 165.010557 118.978445) + (xy 165.04115 118.9736) (xy 165.557418 118.9736) (xy 165.557419 118.9736) (xy 165.683094 118.948601) + (xy 165.801477 118.899565) (xy 165.857244 118.862303) (xy 165.908019 118.828377) (xy 168.9663 115.770096) + (xy 169.020817 115.742319) (xy 169.036304 115.7411) (xy 178.267997 115.7411) (xy 178.326188 115.760007) + (xy 178.362152 115.809507) (xy 178.362152 115.870693) (xy 178.356937 115.883581) (xy 178.326078 115.946703) + (xy 178.326077 115.946705) (xy 178.326077 115.946707) (xy 178.31615 116.01484) (xy 178.31615 116.63136) + (xy 178.319216 116.6524) (xy 178.326077 116.699495) (xy 178.359479 116.767819) (xy 178.377452 116.804583) + (xy 178.460167 116.887298) (xy 178.491681 116.902704) (xy 178.565254 116.938672) (xy 178.565255 116.938672) + (xy 178.565257 116.938673) (xy 178.63339 116.9486) (xy 178.633393 116.9486) (xy 179.096881 116.9486) + (xy 179.155072 116.967507) (xy 179.166885 116.977596) (xy 179.794653 117.605364) (xy 179.794654 117.605364) + (xy 179.794655 117.605365) (xy 179.886721 117.6435) (xy 179.886722 117.6435) (xy 200.301579 117.6435) + (xy 200.368225 117.615894) (xy 200.393647 117.605364) (xy 203.853545 114.145464) (xy 203.853547 114.145464) + (xy 203.924014 114.074997) (xy 203.93981 114.03686) (xy 203.962151 113.982927) (xy 203.962151 113.883272) + (xy 203.962151 113.875298) (xy 203.96215 113.875284) (xy 203.96215 111.888271) (xy 203.924015 111.796205) + (xy 203.924014 111.796204) (xy 203.924014 111.796203) (xy 203.853547 111.725736) (xy 203.853545 111.725735) + (xy 203.853544 111.725734) (xy 203.761479 111.6876) (xy 203.761478 111.6876) (xy 201.270272 111.6876) + (xy 201.212081 111.668693) (xy 201.179707 111.628587) (xy 201.173856 111.615335) (xy 201.094415 111.535894) + (xy 200.991641 111.490515) (xy 200.99164 111.490514) (xy 200.991638 111.490514) (xy 200.966518 111.4876) + (xy 199.226789 111.4876) (xy 199.226786 111.487601) (xy 199.201659 111.490514) (xy 199.098885 111.535894) + (xy 199.019444 111.615335) (xy 198.974064 111.718111) (xy 198.97115 111.74323) (xy 198.97115 112.13296) + (xy 198.971151 112.132963) (xy 198.974064 112.15809) (xy 198.99346 112.202017) (xy 199.019444 112.260865) + (xy 199.098885 112.340306) (xy 199.201659 112.385685) (xy 199.226785 112.3886) (xy 199.879033 112.388599) + (xy 199.937223 112.407506) (xy 199.973187 112.457006) (xy 199.973187 112.518192) (xy 199.937223 112.567692) + (xy 199.911328 112.580568) (xy 199.911399 112.580738) (xy 199.908941 112.581756) (xy 199.907783 112.582332) + (xy 199.906914 112.582595) (xy 199.788524 112.631634) (xy 199.788515 112.631638) (xy 199.681982 112.702822) + (xy 199.656199 112.728605) (xy 199.601682 112.756381) (xy 199.586197 112.7576) (xy 199.226789 112.7576) + (xy 199.226786 112.757601) (xy 199.201659 112.760514) (xy 199.098885 112.805894) (xy 199.019444 112.885335) + (xy 198.974064 112.988111) (xy 198.97115 113.01323) (xy 198.97115 113.40296) (xy 198.971151 113.402963) + (xy 198.974064 113.42809) (xy 198.992079 113.468889) (xy 199.019444 113.530865) (xy 199.098885 113.610306) + (xy 199.201659 113.655685) (xy 199.226785 113.6586) (xy 199.586196 113.658599) (xy 199.587421 113.658997) + (xy 199.588656 113.65863) (xy 199.596049 113.6618) (xy 199.644387 113.677506) (xy 199.646359 113.678977) + (xy 199.651567 113.682962) (xy 199.681981 113.713376) (xy 199.755571 113.762547) (xy 199.758093 113.764477) + (xy 199.773743 113.787184) (xy 199.790811 113.808834) (xy 199.79094 113.812134) (xy 199.792816 113.814855) + (xy 199.79213 113.84242) (xy 199.793213 113.869972) (xy 199.791377 113.872719) (xy 199.791295 113.876021) + (xy 199.774542 113.897914) (xy 199.75922 113.920846) (xy 199.754211 113.924484) (xy 199.754113 113.924613) + (xy 199.75398 113.924652) (xy 199.752932 113.925414) (xy 199.681982 113.972821) (xy 199.656198 113.998605) + (xy 199.601681 114.026381) (xy 199.586196 114.0276) (xy 199.226789 114.0276) (xy 199.226786 114.027601) + (xy 199.201659 114.030514) (xy 199.098885 114.075894) (xy 199.019444 114.155335) (xy 198.974064 114.258111) + (xy 198.97115 114.28323) (xy 198.97115 114.642644) (xy 198.952243 114.700835) (xy 198.942154 114.712647) + (xy 198.3074 115.347403) (xy 198.252883 115.375181) (xy 198.237396 115.3764) (xy 193.138807 115.3764) + (xy 193.080616 115.357493) (xy 193.044652 115.307993) (xy 193.044652 115.246807) (xy 193.080616 115.197307) + (xy 193.113181 115.181774) (xy 193.150036 115.171899) (xy 193.150038 115.171897) (xy 193.15004 115.171897) + (xy 193.252758 115.112592) (xy 193.252758 115.112591) (xy 193.252763 115.112589) (xy 193.333757 115.031594) + (xy 193.388272 115.003819) (xy 193.403759 115.0026) (xy 194.922479 115.0026) (xy 194.991283 114.9741) + (xy 195.014547 114.964464) (xy 195.021416 114.957595) (xy 195.075933 114.929818) (xy 195.09142 114.928599) + (xy 196.016511 114.928599) (xy 196.016514 114.928599) (xy 196.041641 114.925685) (xy 196.144415 114.880306) + (xy 196.223856 114.800865) (xy 196.269235 114.698091) (xy 196.27215 114.672965) (xy 196.272149 114.283236) + (xy 196.269235 114.258109) (xy 196.223856 114.155335) (xy 196.144415 114.075894) (xy 196.041641 114.030515) + (xy 196.04164 114.030514) (xy 196.041638 114.030514) (xy 196.016519 114.0276) (xy 195.195774 114.0276) + (xy 195.137583 114.008693) (xy 195.101619 113.959193) (xy 195.101619 113.898007) (xy 195.137583 113.848507) + (xy 195.146257 113.842874) (xy 195.154371 113.83819) (xy 195.23834 113.754221) (xy 195.23834 113.75422) + (xy 195.304965 113.687595) (xy 195.359482 113.659818) (xy 195.374969 113.658599) (xy 196.016511 113.658599) + (xy 196.016514 113.658599) (xy 196.041641 113.655685) (xy 196.144415 113.610306) (xy 196.223856 113.530865) + (xy 196.269235 113.428091) (xy 196.27215 113.402965) (xy 196.272149 113.013236) (xy 196.269235 112.988109) + (xy 196.223856 112.885335) (xy 196.144415 112.805894) (xy 196.041641 112.760515) (xy 196.04164 112.760514) + (xy 196.041638 112.760514) (xy 196.016519 112.7576) (xy 196.016515 112.7576) (xy 195.207892 112.7576) + (xy 195.206025 112.7571) (xy 195.087275 112.7571) (xy 195.085406 112.7576) (xy 194.920418 112.7576) + (xy 194.862227 112.738693) (xy 194.826263 112.689193) (xy 194.826263 112.628007) (xy 194.850414 112.588596) + (xy 195.021415 112.417595) (xy 195.075932 112.389818) (xy 195.091419 112.388599) (xy 196.016511 112.388599) + (xy 196.016514 112.388599) (xy 196.041641 112.385685) (xy 196.144415 112.340306) (xy 196.223856 112.260865) + (xy 196.269235 112.158091) (xy 196.27215 112.132965) (xy 196.272149 111.743236) (xy 196.269235 111.718109) + (xy 196.223856 111.615335) (xy 196.192182 111.583661) (xy 196.164407 111.529147) (xy 196.173978 111.468715) + (xy 196.217243 111.42545) (xy 196.226163 111.421919) (xy 196.226135 111.421854) (xy 196.231851 111.41938) + (xy 196.373202 111.335785) (xy 196.489335 111.219652) (xy 196.57293 111.078301) (xy 196.572931 111.078298) + (xy 196.58719 111.02922) (xy 196.621581 110.978614) (xy 196.679149 110.957888) (xy 196.710477 110.963609) + (xy 196.710796 110.962419) (xy 196.717062 110.964098) (xy 196.717064 110.964099) (xy 196.831641 110.9948) + (xy 196.831643 110.9948) (xy 196.950257 110.9948) (xy 196.950259 110.9948) (xy 197.064836 110.964099) + (xy 197.120668 110.931863) (xy 197.170169 110.9186) (xy 198.923028 110.9186) (xy 198.981219 110.937507) + (xy 199.013592 110.977612) (xy 199.019444 110.990865) (xy 199.098885 111.070306) (xy 199.201659 111.115685) + (xy 199.226785 111.1186) (xy 200.966514 111.118599) (xy 200.991641 111.115685) (xy 201.094415 111.070306) + (xy 201.173856 110.990865) (xy 201.219235 110.888091) (xy 201.22215 110.862965) (xy 201.222149 110.473236) + (xy 201.219235 110.448109) (xy 201.173856 110.345335) (xy 201.173855 110.345334) (xy 201.17015 110.336943) + (xy 201.172179 110.336046) (xy 201.158427 110.28936) (xy 201.178938 110.231714) (xy 201.229414 110.197135) + (xy 201.257389 110.1931) (xy 204.960696 110.1931) (xy 205.018887 110.212007) (xy 205.0307 110.222096) + (xy 206.4817 111.673096) (xy 206.509477 111.727613) (xy 206.499906 111.788045) (xy 206.4817 111.813103) + (xy 205.05008 113.244723) (xy 205.05008 113.244724) (xy 200.2033 118.091504) (xy 200.148783 118.119281) + (xy 200.133296 118.1205) (xy 185.97968 118.1205) (xy 185.977549 118.120924) (xy 185.854006 118.145499) + (xy 185.854005 118.145499) (xy 185.854002 118.1455) (xy 185.735623 118.194534) (xy 185.629084 118.26572) + (xy 182.551198 121.343604) (xy 182.496681 121.371381) (xy 182.481194 121.3726) (xy 180.960128 121.3726) + (xy 180.960126 121.372601) (xy 180.86635 121.387452) (xy 180.866345 121.387454) (xy 180.753309 121.445049) + (xy 180.753308 121.44505) (xy 180.6636 121.534758) (xy 180.620907 121.618546) (xy 180.577644 121.66181) + (xy 180.532699 121.6726) (xy 177.603804 121.6726) (xy 177.545613 121.653693) (xy 177.5338 121.643604) + (xy 175.743018 119.852822) (xy 173.708019 117.817823) (xy 173.708015 117.81782) (xy 173.601476 117.746634) + (xy 173.483097 117.6976) (xy 173.483095 117.697599) (xy 173.483094 117.697599) (xy 173.357419 117.6726) + (xy 172.84115 117.6726) (xy 172.782959 117.653693) (xy 172.746995 117.604193) (xy 172.74215 117.5736) + (xy 172.74215 116.708281) (xy 172.742149 116.708272) (xy 172.733417 116.664379) (xy 172.733415 116.664375) + (xy 172.711355 116.63136) (xy 172.700154 116.614596) (xy 172.683347 116.603366) (xy 172.650374 116.581334) + (xy 172.65037 116.581332) (xy 172.606477 116.5726) (xy 172.60647 116.5726) (xy 170.57683 116.5726) + (xy 170.576822 116.5726) (xy 170.532929 116.581332) (xy 170.532925 116.581334) (xy 170.483148 116.614594) + (xy 170.483144 116.614598) (xy 170.449884 116.664375) (xy 170.449882 116.664379) (xy 170.44115 116.708272) + (xy 170.44115 119.937927) (xy 170.449882 119.98182) (xy 170.449883 119.981822) (xy 170.483146 120.031604) + (xy 170.532928 120.064867) (xy 170.543977 120.067064) (xy 170.576822 120.073599) (xy 170.576828 120.073599) + (xy 170.57683 120.0736) (xy 170.576831 120.0736) (xy 172.606469 120.0736) (xy 172.60647 120.0736) + (xy 172.606471 120.073599) (xy 172.606477 120.073599) (xy 172.628273 120.069262) (xy 172.650372 120.064867) + (xy 172.700154 120.031604) (xy 172.733417 119.981822) (xy 172.74215 119.93792) (xy 172.74215 119.0726) + (xy 172.746995 119.057688) (xy 172.746995 119.042007) (xy 172.756211 119.029321) (xy 172.761057 119.014409) + (xy 172.773742 119.005192) (xy 172.782959 118.992507) (xy 172.797871 118.987661) (xy 172.810557 118.978445) + (xy 172.84115 118.9736) (xy 172.982896 118.9736) (xy 173.041087 118.992507) (xy 173.0529 119.002596) + (xy 176.87868 122.828376) (xy 176.985223 122.899565) (xy 177.103606 122.948601) (xy 177.229281 122.9736) + (xy 180.532699 122.9736) (xy 180.59089 122.992507) (xy 180.620907 123.027652) (xy 180.6636 123.111442) + (xy 180.753308 123.20115) (xy 180.866346 123.258746) (xy 180.960131 123.2736) (xy 184.023168 123.273599) + (xy 184.023171 123.273599) (xy 184.023172 123.273598) (xy 184.070061 123.266172) (xy 184.116949 123.258747) + (xy 184.116949 123.258746) (xy 184.116954 123.258746) (xy 184.229992 123.20115) (xy 184.3197 123.111442) + (xy 184.377296 122.998404) (xy 184.39215 122.904619) (xy 184.392149 122.573101) (xy 185.641651 122.573101) + (xy 185.641651 122.923086) (xy 185.652142 123.025787) (xy 185.652145 123.025799) (xy 185.707293 123.192224) + (xy 185.79933 123.34144) (xy 185.923309 123.465419) (xy 186.072525 123.557456) (xy 186.238956 123.612606) + (xy 186.341662 123.623099) (xy 187.641648 123.623099) (xy 187.64165 123.623098) (xy 187.64165 122.573101) + (xy 188.14165 122.573101) (xy 188.14165 123.623098) (xy 188.141651 123.623099) (xy 189.441636 123.623099) + (xy 189.544337 123.612607) (xy 189.544349 123.612604) (xy 189.710774 123.557456) (xy 189.85999 123.465419) + (xy 189.983969 123.34144) (xy 190.076006 123.192224) (xy 190.131156 123.025793) (xy 190.14165 122.923087) + (xy 190.14165 122.573101) (xy 190.141649 122.5731) (xy 188.141651 122.5731) (xy 188.14165 122.573101) + (xy 187.64165 122.573101) (xy 187.641649 122.5731) (xy 185.641652 122.5731) (xy 185.641651 122.573101) + (xy 184.392149 122.573101) (xy 184.392149 122.308747) (xy 184.392149 121.741582) (xy 184.391279 121.73609) + (xy 184.391279 121.736086) (xy 184.389224 121.723112) (xy 185.64165 121.723112) (xy 185.64165 122.073099) + (xy 185.641651 122.0731) (xy 187.641649 122.0731) (xy 187.64165 122.073099) (xy 187.64165 121.023101) + (xy 188.14165 121.023101) (xy 188.14165 122.073099) (xy 188.141651 122.0731) (xy 190.141648 122.0731) + (xy 190.141649 122.073099) (xy 190.141649 121.723113) (xy 190.131157 121.620412) (xy 190.131154 121.6204) + (xy 190.076006 121.453975) (xy 189.983969 121.304759) (xy 189.85999 121.18078) (xy 189.710774 121.088743) + (xy 189.544343 121.033593) (xy 189.441637 121.0231) (xy 188.141651 121.0231) (xy 188.14165 121.023101) + (xy 187.64165 121.023101) (xy 187.641649 121.0231) (xy 186.341663 121.0231) (xy 186.238962 121.033592) + (xy 186.23895 121.033595) (xy 186.072525 121.088743) (xy 185.923309 121.18078) (xy 185.79933 121.304759) + (xy 185.707293 121.453975) (xy 185.652143 121.620406) (xy 185.64165 121.723112) (xy 184.389224 121.723112) + (xy 184.377297 121.6478) (xy 184.377296 121.647798) (xy 184.377296 121.647796) (xy 184.3197 121.534758) + (xy 184.319698 121.534756) (xy 184.319003 121.5338) (xy 184.318635 121.53267) (xy 184.316163 121.527817) + (xy 184.316931 121.527425) (xy 184.300095 121.475609) (xy 184.319002 121.417418) (xy 184.329085 121.40561) + (xy 186.2842 119.450496) (xy 186.338717 119.422719) (xy 186.354204 119.4215) (xy 200.507818 119.4215) + (xy 200.507819 119.4215) (xy 200.633494 119.396501) (xy 200.751877 119.347465) (xy 200.858419 119.276277) + (xy 201.561597 118.573099) (xy 208.714418 118.573099) (xy 208.714419 118.5731) (xy 209.758638 118.5731) + (xy 209.725725 118.630107) (xy 209.69165 118.757274) (xy 209.69165 118.888926) (xy 209.725725 119.016093) + (xy 209.758638 119.0731) (xy 208.714419 119.0731) (xy 208.724891 119.139222) (xy 208.790554 119.341315) + (xy 208.887025 119.530652) (xy 209.011927 119.702564) (xy 209.162185 119.852822) (xy 209.334097 119.977724) + (xy 209.523436 120.074196) (xy 209.693478 120.129445) (xy 209.742978 120.165409) (xy 209.761886 120.223599) + (xy 209.742979 120.28179) (xy 209.693479 120.317754) (xy 209.662886 120.3226) (xy 209.410128 120.3226) + (xy 209.410126 120.322601) (xy 209.31635 120.337452) (xy 209.316345 120.337454) (xy 209.203309 120.395049) + (xy 209.113599 120.484759) (xy 209.056004 120.597795) (xy 209.04115 120.691578) (xy 209.04115 121.954621) + (xy 209.041151 121.954623) (xy 209.056002 122.048399) (xy 209.056004 122.048404) (xy 209.1136 122.161442) + (xy 209.203308 122.25115) (xy 209.316346 122.308746) (xy 209.410131 122.3236) (xy 210.973168 122.323599) + (xy 210.973171 122.323599) (xy 210.973172 122.323598) (xy 211.020061 122.316172) (xy 211.066949 122.308747) + (xy 211.066949 122.308746) (xy 211.066954 122.308746) (xy 211.179992 122.25115) (xy 211.2697 122.161442) + (xy 211.327296 122.048404) (xy 211.34215 121.954619) (xy 211.342149 120.691582) (xy 211.342149 120.691581) + (xy 211.342149 120.691578) (xy 211.342148 120.691576) (xy 211.327297 120.5978) (xy 211.327296 120.597798) + (xy 211.327296 120.597796) (xy 211.2697 120.484758) (xy 211.179992 120.39505) (xy 211.066954 120.337454) + (xy 211.066955 120.337454) (xy 210.973172 120.3226) (xy 210.720416 120.3226) (xy 210.662225 120.303693) + (xy 210.626261 120.254193) (xy 210.626261 120.193007) (xy 210.662225 120.143507) (xy 210.689824 120.129445) + (xy 210.859863 120.074196) (xy 211.049202 119.977724) (xy 211.221114 119.852822) (xy 211.371372 119.702564) (xy 211.496274 119.530652) (xy 211.592745 119.341315) (xy 211.658408 119.139222) (xy 211.668881 119.0731) (xy 210.624662 119.0731) (xy 210.657575 119.016093) (xy 210.69165 118.888926) (xy 210.69165 118.757274) (xy 210.657575 118.630107) (xy 210.624662 118.5731) (xy 211.668881 118.5731) (xy 211.668881 118.573099) @@ -42628,503 +48103,495 @@ (xy 209.94165 118.390088) (xy 209.94165 117.473101) (xy 209.941649 117.4731) (xy 209.9354 117.4731) (xy 209.725528 117.50634) (xy 209.523434 117.572004) (xy 209.334097 117.668475) (xy 209.162185 117.793377) (xy 209.011927 117.943635) (xy 208.887025 118.115547) (xy 208.790554 118.304884) (xy 208.724891 118.506977) - (xy 208.714418 118.573099) (xy 201.773729 118.573099) (xy 208.093438 112.25339) (xy 208.093439 112.253389) - (xy 208.181044 112.122279) (xy 208.231599 112.000227) (xy 208.241387 111.976598) (xy 208.27215 111.821943) - (xy 208.27215 111.664258) (xy 208.241387 111.509603) (xy 208.229042 111.4798) (xy 208.223307 111.465955) - (xy 208.187641 111.379848) (xy 208.181044 111.363921) (xy 208.093439 111.232811) (xy 205.781439 108.920811) - (xy 205.692619 108.861463) (xy 205.650335 108.833209) (xy 205.650324 108.833203) (xy 205.504647 108.772863) - (xy 205.349994 108.7421) (xy 205.349992 108.7421) (xy 201.09425 108.7421) (xy 201.036059 108.723193) - (xy 201.000095 108.673693) (xy 200.99525 108.6431) (xy 200.99525 103.534662) (xy 200.99525 103.534658) - (xy 200.989302 103.504759) (xy 200.98829 103.499669) (xy 200.971968 103.417614) (xy 200.964487 103.380003) - (xy 200.964484 103.379995) (xy 200.957751 103.363739) (xy 200.957749 103.363737) (xy 200.950022 103.345083) - (xy 200.904144 103.234321) (xy 200.816539 103.103211) (xy 200.705039 102.991711) (xy 199.798632 102.085304) - (xy 199.770855 102.030787) (xy 199.780426 101.970355) (xy 199.823691 101.92709) (xy 199.868636 101.9163) - (xy 202.085111 101.9163) (xy 202.143302 101.935207) (xy 202.155115 101.945296) (xy 208.887154 108.677335) - (xy 208.914931 108.731852) (xy 208.91615 108.747339) (xy 208.91615 108.966206) (xy 208.926773 109.054665) - (xy 208.982287 109.195439) (xy 208.982288 109.195441) (xy 208.982289 109.195442) (xy 209.073728 109.316022) - (xy 209.194308 109.407461) (xy 209.194309 109.407461) (xy 209.19431 109.407462) (xy 209.264697 109.435219) - (xy 209.335086 109.462977) (xy 209.423548 109.4736) (xy 209.42355 109.4736) (xy 210.95975 109.4736) - (xy 210.959752 109.4736) (xy 211.048214 109.462977) (xy 211.188992 109.407461) (xy 211.309572 109.316022) - (xy 211.401011 109.195442) (xy 211.456527 109.054664) (xy 211.46715 108.966202) (xy 211.46715 107.679998) - (xy 211.456527 107.591536) (xy 211.401011 107.450758) (xy 211.309572 107.330178) (xy 211.188992 107.238739) - (xy 211.188991 107.238738) (xy 211.188989 107.238737) (xy 211.048216 107.183223) (xy 211.025431 107.180487) - (xy 210.96991 107.154775) (xy 210.940105 107.10134) (xy 210.947401 107.040591) (xy 210.989011 106.995733) - (xy 210.992292 106.993983) (xy 211.024199 106.977725) (xy 211.0242 106.977725) (xy 211.196114 106.852822) - (xy 211.346372 106.702564) (xy 211.471274 106.530652) (xy 211.567745 106.341315) (xy 211.633408 106.139222) - (xy 211.643881 106.0731) (xy 210.595796 106.0731) (xy 210.63428 106.006443) (xy 210.66665 105.885635) - (xy 210.66665 105.760565) (xy 210.63428 105.639757) (xy 210.595796 105.5731) (xy 211.643881 105.5731) - (xy 211.643881 105.573099) (xy 211.633408 105.506977) (xy 211.567745 105.304884) (xy 211.471274 105.115547) - (xy 211.346372 104.943635) (xy 211.196114 104.793377) (xy 211.024202 104.668475) (xy 210.834859 104.572001) - (xy 210.796476 104.55953) (xy 210.746976 104.523566) (xy 210.728069 104.465376) (xy 210.746977 104.407185) - (xy 210.782122 104.377166) (xy 210.919644 104.307096) (xy 211.066151 104.200653) (xy 211.194203 104.072601) - (xy 211.300646 103.926094) (xy 211.382861 103.764739) (xy 211.438821 103.592509) (xy 211.456321 103.482016) - (xy 211.46715 103.413649) (xy 211.46715 103.23255) (xy 211.447517 103.108593) (xy 211.438821 103.053691) - (xy 211.382861 102.881461) (xy 211.300646 102.720106) (xy 211.194203 102.573599) (xy 211.066151 102.445547) - (xy 210.919644 102.339104) (xy 210.919643 102.339103) (xy 210.919641 102.339102) (xy 210.758287 102.256888) - (xy 210.586056 102.200928) (xy 210.407199 102.1726) (xy 210.407196 102.1726) (xy 209.976104 102.1726) - (xy 209.976101 102.1726) (xy 209.797243 102.200928) (xy 209.625012 102.256888) (xy 209.463658 102.339102) - (xy 209.419775 102.370985) (xy 209.317149 102.445547) (xy 209.189097 102.573599) (xy 209.153624 102.622424) - (xy 209.082652 102.720108) (xy 209.000438 102.881462) (xy 208.944478 103.053693) (xy 208.91615 103.23255) - (xy 208.91615 103.413649) (xy 208.944478 103.592506) (xy 209.000438 103.764737) (xy 209.081134 103.923112) - (xy 209.082654 103.926094) (xy 209.189097 104.072601) (xy 209.317149 104.200653) (xy 209.463656 104.307096) - (xy 209.463658 104.307097) (xy 209.601175 104.377166) (xy 209.64444 104.420431) (xy 209.654011 104.480863) - (xy 209.626233 104.53538) (xy 209.586824 104.55953) (xy 209.548438 104.572002) (xy 209.359097 104.668475) - (xy 209.187185 104.793377) (xy 209.036927 104.943635) (xy 208.912025 105.115547) (xy 208.815551 105.30489) - (xy 208.784649 105.399998) (xy 208.748685 105.449498) (xy 208.690495 105.468405) (xy 208.632304 105.449497) - (xy 208.620491 105.439409) (xy 203.377228 100.196147) (xy 203.377227 100.196145) (xy 203.230905 100.049823) - (xy 203.058848 99.934859) (xy 203.058849 99.934859) (xy 203.058847 99.934858) (xy 202.867668 99.855669) - (xy 202.664717 99.8153) (xy 202.664715 99.8153) (xy 177.083885 99.8153) (xy 177.083882 99.8153) - (xy 176.880931 99.855669) (xy 176.689752 99.934858) (xy 176.517695 100.049822) (xy 176.371372 100.196144) - (xy 176.371373 100.196145) (xy 173.061153 103.506365) (xy 173.006636 103.534142) (xy 172.946204 103.524571) - (xy 172.902939 103.481306) (xy 172.892149 103.436361) (xy 172.892149 103.178239) (xy 172.892149 103.178236) - (xy 172.889235 103.153109) (xy 172.843856 103.050335) (xy 172.764415 102.970894) (xy 172.661641 102.925515) - (xy 172.66164 102.925514) (xy 172.661638 102.925514) (xy 172.636518 102.9226) (xy 170.546789 102.9226) - (xy 170.546786 102.922601) (xy 170.521659 102.925514) (xy 170.418885 102.970894) (xy 170.339444 103.050335) - (xy 170.294064 103.153111) (xy 170.29115 103.17823) (xy 170.29115 103.6736) (xy 170.272243 103.731791) - (xy 170.222743 103.767755) (xy 170.19215 103.7726) (xy 169.748316 103.7726) (xy 169.748296 103.772599) - (xy 169.743416 103.772599) (xy 169.536485 103.772599) (xy 169.536484 103.772599) (xy 169.385747 103.802583) - (xy 169.385743 103.802584) (xy 169.380933 103.803541) (xy 169.33353 103.81297) (xy 169.287798 103.831913) - (xy 169.283349 103.833755) (xy 169.283345 103.833757) (xy 169.142356 103.892155) (xy 169.142344 103.892161) - (xy 168.970295 104.007123) (xy 168.970291 104.007126) (xy 166.640615 106.336804) (xy 166.586098 106.364581) - (xy 166.570611 106.3658) (xy 165.19115 106.3658) (xy 165.132959 106.346893) (xy 165.096995 106.297393) - (xy 165.09215 106.2668) (xy 165.092149 103.178239) (xy 165.092149 103.178236) (xy 165.089235 103.153109) - (xy 165.043856 103.050335) (xy 164.964415 102.970894) (xy 164.962798 102.97018) (xy 164.901161 102.942964) - (xy 164.855566 102.902163) (xy 164.84215 102.8524) (xy 164.84215 91.759636) (xy 164.842149 91.759632) - (xy 164.839836 91.748005) (xy 164.80178 91.55668) (xy 164.722591 91.365502) (xy 164.607627 91.193445) - (xy 164.461305 91.047123) (xy 164.329395 90.958984) (xy 164.289247 90.932158) (xy 164.098068 90.852969) - (xy 163.895117 90.8126) (xy 163.895115 90.8126) (xy 163.688185 90.8126) (xy 163.688182 90.8126) - (xy 163.485231 90.852969) (xy 163.294052 90.932158) (xy 163.121998 91.04712) (xy 162.97567 91.193448) - (xy 162.860708 91.365502) (xy 162.781519 91.556681) (xy 162.74115 91.759632) (xy 162.74115 102.8524) - (xy 162.722243 102.910591) (xy 162.682139 102.942964) (xy 162.618886 102.970893) (xy 162.539444 103.050335) - (xy 162.494064 103.153111) (xy 162.49115 103.17823) (xy 162.49115 103.178232) (xy 162.49115 103.178235) - (xy 162.49115 104.75138) (xy 162.491151 106.2668) (xy 162.472244 106.324991) (xy 162.422744 106.360955) - (xy 162.392151 106.3658) (xy 155.91115 106.3658) (xy 155.852959 106.346893) (xy 155.816995 106.297393) - (xy 155.81215 106.2668) (xy 155.81215 95.889636) (xy 155.812149 95.889632) (xy 155.811294 95.885336) - (xy 155.77178 95.68668) (xy 155.692591 95.495502) (xy 155.577627 95.323445) (xy 155.431305 95.177123) - (xy 155.431301 95.17712) (xy 154.281674 94.027493) (xy 154.253897 93.972976) (xy 154.263468 93.912544) - (xy 154.306733 93.869279) (xy 154.367165 93.859708) (xy 154.401173 93.87175) (xy 154.483666 93.919377) - (xy 154.636393 93.9603) (xy 154.636395 93.9603) (xy 154.794505 93.9603) (xy 154.794507 93.9603) - (xy 154.947234 93.919377) (xy 155.084166 93.84032) (xy 155.19597 93.728516) (xy 155.275027 93.591584) - (xy 155.31595 93.438857) (xy 155.31595 93.280743) (xy 155.275027 93.128016) (xy 155.19597 92.991084) - (xy 155.084166 92.87928) (xy 154.947234 92.800223) (xy 154.794507 92.7593) (xy 154.636393 92.7593) - (xy 154.483666 92.800223) (xy 154.346734 92.87928) (xy 154.23493 92.991084) (xy 154.155873 93.128016) - (xy 154.11495 93.280743) (xy 154.11495 93.438857) (xy 154.155873 93.591584) (xy 154.203497 93.674072) - (xy 154.216218 93.73392) (xy 154.191331 93.789815) (xy 154.138343 93.820408) (xy 154.077493 93.814012) - (xy 154.047756 93.793575) (xy 144.067629 83.813448) (xy 144.067627 83.813445) (xy 143.921305 83.667123) - (xy 143.921301 83.66712) (xy 143.749247 83.552158) (xy 143.558068 83.472969) (xy 143.355117 83.4326) - (xy 143.355115 83.4326) (xy 134.780015 83.4326) (xy 134.779995 83.432599) (xy 134.775115 83.432599) - (xy 134.568185 83.432599) (xy 134.568182 83.432599) (xy 134.36523 83.47297) (xy 134.365228 83.47297) - (xy 134.174056 83.552155) (xy 134.174044 83.552161) (xy 134.001995 83.667123) (xy 134.001991 83.667126) - (xy 129.485915 88.183204) (xy 129.431398 88.210981) (xy 129.415911 88.2122) (xy 128.527189 88.2122) - (xy 128.468998 88.193293) (xy 128.433034 88.143793) (xy 128.433034 88.082607) (xy 128.457183 88.043198) - (xy 128.507627 87.992755) (xy 128.622591 87.820698) (xy 128.70178 87.62952) (xy 128.74215 87.426565) - (xy 128.74215 87.219635) (xy 128.70178 87.01668) (xy 128.622591 86.825502) (xy 128.507627 86.653445) - (xy 128.361305 86.507123) (xy 128.189248 86.392159) (xy 128.189249 86.392159) (xy 128.189247 86.392158) - (xy 127.998068 86.312969) (xy 127.795117 86.2726) (xy 127.795115 86.2726) (xy 127.588185 86.2726) - (xy 127.588182 86.2726) (xy 127.385231 86.312969) (xy 127.194052 86.392158) (xy 127.021998 86.50712) - (xy 126.87567 86.653448) (xy 126.760708 86.825502) (xy 126.681519 87.016681) (xy 126.64115 87.219632) - (xy 126.64115 87.282798) (xy 126.622243 87.340989) (xy 126.612154 87.352802) (xy 122.846352 91.118604) - (xy 122.839234 91.12223) (xy 122.834539 91.128693) (xy 122.81249 91.135856) (xy 122.791835 91.146381) - (xy 122.776348 91.1476) (xy 122.76625 91.1476) (xy 122.708059 91.128693) (xy 122.672095 91.079193) - (xy 122.66725 91.0486) (xy 122.66725 89.364393) (xy 122.686157 89.306202) (xy 122.711249 89.282077) - (xy 122.7267 89.271753) (xy 122.751939 89.254889) (xy 127.634632 84.372196) (xy 127.689149 84.344419) - (xy 127.704636 84.3432) (xy 131.398191 84.3432) (xy 131.398192 84.3432) (xy 131.552847 84.312437) - (xy 131.698529 84.252094) (xy 131.829639 84.164489) (xy 131.941139 84.052989) (xy 132.028744 83.921879) - (xy 132.089087 83.776197) (xy 132.11985 83.621542) (xy 132.11985 83.463858) (xy 132.089087 83.309203) - (xy 132.028744 83.163521) (xy 132.028743 83.163519) (xy 132.02874 83.163514) (xy 131.991407 83.107642) - (xy 131.941139 83.032411) (xy 131.829639 82.920911) (xy 131.777409 82.886012) (xy 131.698535 82.833309) - (xy 131.698524 82.833303) (xy 131.552847 82.772963) (xy 131.398194 82.7422) (xy 131.398192 82.7422) - (xy 127.410893 82.7422) (xy 127.253208 82.7422) (xy 127.253205 82.7422) (xy 127.098554 82.772961) - (xy 126.952871 82.833305) (xy 126.821761 82.920911) (xy 126.821757 82.920914) (xy 121.619864 88.122807) - (xy 121.619861 88.122811) (xy 121.532259 88.253914) (xy 121.532253 88.253925) (xy 121.471913 88.399601) - (xy 121.471913 88.399603) (xy 121.44115 88.554255) (xy 121.44115 88.711944) (xy 121.454046 88.776774) - (xy 121.470117 88.85757) (xy 121.471913 88.866596) (xy 121.471913 88.866598) (xy 121.532253 89.012274) - (xy 121.532259 89.012285) (xy 121.571195 89.070555) (xy 121.619861 89.143389) (xy 121.619864 89.143392) - (xy 121.619868 89.143397) (xy 121.731361 89.254889) (xy 121.772051 89.282077) (xy 121.809931 89.330127) - (xy 121.81605 89.364393) (xy 121.81605 90.447393) (xy 121.797143 90.505584) (xy 121.747643 90.541548) - (xy 121.686457 90.541548) (xy 121.636957 90.505584) (xy 121.621424 90.473018) (xy 121.618295 90.461343) - (xy 121.614857 90.448512) (xy 121.594727 90.413646) (xy 121.562133 90.357191) (xy 121.562129 90.357186) - (xy 121.462325 90.257381) (xy 121.446593 90.236878) (xy 121.41213 90.177187) (xy 121.337563 90.102619) - (xy 121.337563 90.10262) (xy 120.787563 89.55262) (xy 120.78756 89.552618) (xy 120.787559 89.552617) - (xy 120.787558 89.552616) (xy 120.696241 89.499894) (xy 120.696243 89.499894) (xy 120.651762 89.487976) - (xy 120.594377 89.4726) (xy 120.594375 89.4726) (xy 120.18115 89.4726) (xy 120.122959 89.453693) - (xy 120.086995 89.404193) (xy 120.08215 89.3736) (xy 120.08215 89.354108) (xy 120.082149 89.354104) - (xy 120.081198 89.349321) (xy 120.05523 89.218772) (xy 120.024009 89.143397) (xy 120.002427 89.091293) - (xy 120.002421 89.091282) (xy 119.925764 88.976558) (xy 119.828191 88.878985) (xy 119.713467 88.802328) - (xy 119.713456 88.802322) (xy 119.585978 88.74952) (xy 119.450645 88.7226) (xy 119.450643 88.7226) - (xy 119.312657 88.7226) (xy 119.312654 88.7226) (xy 119.177322 88.74952) (xy 119.17732 88.74952) - (xy 119.049843 88.802322) (xy 119.049832 88.802328) (xy 118.935108 88.878985) (xy 118.837535 88.976558) - (xy 118.760878 89.091282) (xy 118.760872 89.091293) (xy 118.70807 89.21877) (xy 118.70807 89.218772) - (xy 118.68115 89.354104) (xy 118.68115 89.492095) (xy 118.697025 89.5719) (xy 118.705217 89.613087) - (xy 118.70807 89.627427) (xy 118.70807 89.627429) (xy 118.760872 89.754906) (xy 118.760878 89.754917) - (xy 118.837535 89.869641) (xy 118.935108 89.967214) (xy 119.049832 90.043871) (xy 119.049843 90.043877) - (xy 119.098524 90.064041) (xy 119.177322 90.09668) (xy 119.177325 90.09668) (xy 119.18198 90.098093) - (xy 119.181471 90.09977) (xy 119.225412 90.123256) (xy 119.244582 90.142425) (xy 119.272361 90.19694) - (xy 119.262791 90.257373) (xy 119.244584 90.282434) (xy 119.15087 90.376148) (xy 119.060316 90.466703) - (xy 119.0058 90.494481) (xy 118.990312 90.4957) (xy 115.509789 90.4957) (xy 115.502191 90.493231) - (xy 115.494302 90.494481) (xy 115.473646 90.483956) (xy 115.451598 90.476793) (xy 115.439785 90.466704) - (xy 115.310616 90.337535) (xy 115.282839 90.283018) (xy 115.29241 90.222586) (xy 115.335675 90.179321) - (xy 115.361302 90.170434) (xy 115.49807 90.14323) (xy 115.689248 90.064041) (xy 115.861305 89.949077) - (xy 116.007627 89.802755) (xy 116.026522 89.774475) (xy 116.074572 89.736597) (xy 116.099589 89.73091) - (xy 116.101349 89.730746) (xy 116.229532 89.685893) (xy 116.3388 89.60525) (xy 116.419443 89.495982) - (xy 116.464296 89.367799) (xy 116.467149 89.337373) (xy 116.46715 89.337373) (xy 116.46715 88.928827) - (xy 116.467149 88.928825) (xy 116.4671 88.928306) (xy 116.464296 88.898401) (xy 116.419443 88.770218) - (xy 116.41805 88.768331) (xy 116.367424 88.699734) (xy 116.3388 88.66095) (xy 116.338799 88.660949) - (xy 116.338797 88.660947) (xy 116.282362 88.619296) (xy 116.273451 88.606837) (xy 116.261057 88.597832) - (xy 116.2561 88.582576) (xy 116.246769 88.569529) (xy 116.24215 88.539641) (xy 116.24215 88.456558) - (xy 116.261057 88.398367) (xy 116.282362 88.376903) (xy 116.298856 88.364729) (xy 116.3388 88.33525) - (xy 116.338801 88.335248) (xy 116.338802 88.335248) (xy 116.419442 88.225983) (xy 116.419441 88.225983) - (xy 116.419443 88.225982) (xy 116.464296 88.097799) (xy 116.467149 88.067373) (xy 116.46715 88.067373) - (xy 116.46715 87.658827) (xy 116.467149 87.658825) (xy 116.464401 87.62952) (xy 116.464296 87.628401) - (xy 116.419443 87.500218) (xy 116.382302 87.449894) (xy 116.362159 87.4226) (xy 116.3388 87.39095) - (xy 116.338799 87.390949) (xy 116.338797 87.390947) (xy 116.282362 87.349296) (xy 116.273451 87.336837) - (xy 116.261057 87.327832) (xy 116.2561 87.312576) (xy 116.246769 87.299529) (xy 116.24215 87.269641) - (xy 116.24215 87.186558) (xy 116.261057 87.128367) (xy 116.282362 87.106903) (xy 116.298856 87.094729) - (xy 116.3388 87.06525) (xy 116.338801 87.065248) (xy 116.338802 87.065248) (xy 116.419442 86.955983) - (xy 116.419441 86.955983) (xy 116.419443 86.955982) (xy 116.464296 86.827799) (xy 116.467149 86.797373) - (xy 116.46715 86.797373) (xy 116.46715 86.388827) (xy 116.467149 86.388825) (xy 116.464296 86.358405) - (xy 116.464296 86.358401) (xy 116.419443 86.230218) (xy 116.398067 86.201255) (xy 116.338799 86.120949) - (xy 116.338797 86.120947) (xy 116.282362 86.079296) (xy 116.273451 86.066837) (xy 116.261057 86.057832) - (xy 116.2561 86.042576) (xy 116.246769 86.029529) (xy 116.24215 85.999641) (xy 116.24215 85.916558) - (xy 116.261057 85.858367) (xy 116.282362 85.836903) (xy 116.311588 85.815333) (xy 116.3388 85.79525) - (xy 116.338801 85.795248) (xy 116.338802 85.795248) (xy 116.419442 85.685983) (xy 116.419441 85.685983) - (xy 116.419443 85.685982) (xy 116.464296 85.557799) (xy 116.467149 85.527373) (xy 116.46715 85.527373) - (xy 116.46715 85.118827) (xy 116.467149 85.118825) (xy 116.464296 85.088401) (xy 116.419443 84.960218) - (xy 116.396828 84.929576) (xy 116.338804 84.850955) (xy 116.338802 84.850953) (xy 116.3388 84.85095) - (xy 116.338796 84.850947) (xy 116.338794 84.850945) (xy 116.229533 84.770307) (xy 116.101353 84.725455) - (xy 116.101338 84.725451) (xy 116.099582 84.725287) (xy 116.098557 84.724844) (xy 116.095465 84.724169) - (xy 116.095596 84.723565) (xy 116.043413 84.701023) (xy 116.026522 84.681724) (xy 116.007627 84.653445) - (xy 116.007623 84.653441) (xy 116.007619 84.653436) (xy 115.858821 84.504639) (xy 115.85882 84.504639) - (xy 114.305929 82.951748) (xy 114.305927 82.951745) (xy 114.159605 82.805423) (xy 114.111023 82.772962) - (xy 114.073074 82.747605) (xy 114.035194 82.699555) (xy 114.032792 82.638417) (xy 114.066785 82.587543) - (xy 114.097483 82.571134) (xy 114.230675 82.527857) (xy 114.412996 82.434961) (xy 114.578541 82.314685) - (xy 114.723235 82.169991) (xy 114.843511 82.004446) (xy 114.936406 81.822127) (xy 114.999641 81.627511) - (xy 115.005192 81.592464) (xy 115.032968 81.537947) (xy 115.087484 81.510168) (xy 115.147917 81.519739) - (xy 115.191182 81.563002) (xy 115.197127 81.577356) (xy 115.251773 81.745538) (xy 115.251775 81.745541) - (xy 115.324052 81.887395) (xy 115.330418 81.899888) (xy 115.432236 82.040028) (xy 115.554722 82.162514) - (xy 115.694862 82.264332) (xy 115.849205 82.342973) (xy 115.849207 82.342973) (xy 115.849208 82.342974) - (xy 115.849211 82.342976) (xy 116.013943 82.396501) (xy 116.013947 82.396502) (xy 116.185036 82.4236) - (xy 116.185039 82.4236) (xy 116.358264 82.4236) (xy 116.529352 82.396502) (xy 116.529356 82.396501) - (xy 116.694088 82.342976) (xy 116.69409 82.342974) (xy 116.694095 82.342973) (xy 116.848438 82.264332) - (xy 116.988578 82.162514) (xy 117.111064 82.040028) (xy 117.212882 81.899888) (xy 117.291523 81.745545) - (xy 117.291524 81.74554) (xy 117.291526 81.745538) (xy 117.345051 81.580806) (xy 117.345052 81.580802) - (xy 117.37215 81.409714) (xy 117.37215 81.236485) (xy 117.345052 81.065397) (xy 117.345051 81.065393) - (xy 117.291526 80.900661) (xy 117.291524 80.900658) (xy 117.291523 80.900657) (xy 117.291523 80.900655) - (xy 117.212882 80.746312) (xy 117.111064 80.606172) (xy 116.988578 80.483686) (xy 116.848438 80.381868) - (xy 116.848437 80.381867) (xy 116.848435 80.381866) (xy 116.694095 80.303227) (xy 116.575691 80.264755) - (xy 116.526191 80.228791) (xy 116.507284 80.1706) (xy 116.526191 80.112409) (xy 116.575692 80.076445) - (xy 116.606284 80.0716) (xy 118.477016 80.0716) (xy 118.535207 80.090507) (xy 118.571171 80.140007) - (xy 118.571171 80.201193) (xy 118.535207 80.250693) (xy 118.507609 80.264755) (xy 118.389204 80.303227) - (xy 118.234864 80.381866) (xy 118.094723 80.483685) (xy 117.972235 80.606173) (xy 117.870416 80.746314) - (xy 117.791775 80.900658) (xy 117.791773 80.900661) (xy 117.738248 81.065393) (xy 117.738247 81.065397) - (xy 117.71115 81.236485) (xy 117.71115 81.409714) (xy 117.738247 81.580802) (xy 117.738248 81.580806) - (xy 117.791773 81.745538) (xy 117.791775 81.745541) (xy 117.864052 81.887395) (xy 117.870418 81.899888) - (xy 117.972236 82.040028) (xy 118.094722 82.162514) (xy 118.234862 82.264332) (xy 118.389205 82.342973) - (xy 118.389207 82.342973) (xy 118.389208 82.342974) (xy 118.389211 82.342976) (xy 118.553943 82.396501) - (xy 118.553947 82.396502) (xy 118.725036 82.4236) (xy 118.725039 82.4236) (xy 118.898264 82.4236) - (xy 119.069352 82.396502) (xy 119.069356 82.396501) (xy 119.234088 82.342976) (xy 119.23409 82.342974) - (xy 119.234095 82.342973) (xy 119.388438 82.264332) (xy 119.528578 82.162514) (xy 119.651064 82.040028) - (xy 119.752882 81.899888) (xy 119.831523 81.745545) (xy 119.831524 81.74554) (xy 119.831526 81.745538) - (xy 119.885051 81.580806) (xy 119.885052 81.580802) (xy 119.91215 81.409714) (xy 119.91215 81.236485) - (xy 119.885052 81.065397) (xy 119.885051 81.065393) (xy 119.831526 80.900661) (xy 119.831524 80.900658) - (xy 119.831523 80.900657) (xy 119.831523 80.900655) (xy 119.752882 80.746312) (xy 119.651064 80.606172) - (xy 119.528578 80.483686) (xy 119.388438 80.381868) (xy 119.388437 80.381867) (xy 119.388435 80.381866) - (xy 119.234095 80.303227) (xy 119.115691 80.264755) (xy 119.066191 80.228791) (xy 119.047284 80.1706) - (xy 119.066191 80.112409) (xy 119.115692 80.076445) (xy 119.146284 80.0716) (xy 121.017016 80.0716) - (xy 121.075207 80.090507) (xy 121.111171 80.140007) (xy 121.111171 80.201193) (xy 121.075207 80.250693) - (xy 121.047609 80.264755) (xy 120.929204 80.303227) (xy 120.774864 80.381866) (xy 120.634723 80.483685) - (xy 120.512235 80.606173) (xy 120.410416 80.746314) (xy 120.331775 80.900658) (xy 120.331773 80.900661) - (xy 120.278248 81.065393) (xy 120.278247 81.065397) (xy 120.25115 81.236485) (xy 120.25115 81.409714) - (xy 120.278247 81.580802) (xy 120.278248 81.580806) (xy 120.331773 81.745538) (xy 120.331775 81.745541) - (xy 120.404052 81.887395) (xy 120.410418 81.899888) (xy 120.512236 82.040028) (xy 120.634722 82.162514) - (xy 120.774862 82.264332) (xy 120.929205 82.342973) (xy 120.929207 82.342973) (xy 120.929208 82.342974) - (xy 120.929211 82.342976) (xy 121.093943 82.396501) (xy 121.093947 82.396502) (xy 121.265036 82.4236) - (xy 121.265039 82.4236) (xy 121.438264 82.4236) (xy 121.609352 82.396502) (xy 121.609356 82.396501) - (xy 121.774088 82.342976) (xy 121.77409 82.342974) (xy 121.774095 82.342973) (xy 121.928438 82.264332) - (xy 122.068578 82.162514) (xy 122.191064 82.040028) (xy 122.292882 81.899888) (xy 122.371523 81.745545) - (xy 122.371524 81.74554) (xy 122.371526 81.745538) (xy 122.425051 81.580806) (xy 122.425052 81.580802) - (xy 122.45215 81.409714) (xy 122.45215 81.236485) (xy 122.425052 81.065397) (xy 122.425051 81.065393) - (xy 122.371526 80.900661) (xy 122.371524 80.900658) (xy 122.371523 80.900657) (xy 122.371523 80.900655) - (xy 122.292882 80.746312) (xy 122.191064 80.606172) (xy 122.068578 80.483686) (xy 121.928438 80.381868) - (xy 121.928437 80.381867) (xy 121.928435 80.381866) (xy 121.774095 80.303227) (xy 121.655691 80.264755) - (xy 121.606191 80.228791) (xy 121.587284 80.1706) (xy 121.606191 80.112409) (xy 121.655692 80.076445) - (xy 121.686284 80.0716) (xy 123.557016 80.0716) (xy 123.615207 80.090507) (xy 123.651171 80.140007) - (xy 123.651171 80.201193) (xy 123.615207 80.250693) (xy 123.587609 80.264755) (xy 123.469204 80.303227) - (xy 123.314864 80.381866) (xy 123.174723 80.483685) (xy 123.052235 80.606173) (xy 122.950416 80.746314) - (xy 122.871775 80.900658) (xy 122.871773 80.900661) (xy 122.818248 81.065393) (xy 122.818247 81.065397) - (xy 122.79115 81.236485) (xy 122.79115 81.409714) (xy 122.818247 81.580802) (xy 122.818248 81.580806) - (xy 122.871773 81.745538) (xy 122.871775 81.745541) (xy 122.944052 81.887395) (xy 122.950418 81.899888) - (xy 123.052236 82.040028) (xy 123.174722 82.162514) (xy 123.314862 82.264332) (xy 123.469205 82.342973) - (xy 123.469207 82.342973) (xy 123.469208 82.342974) (xy 123.469211 82.342976) (xy 123.633943 82.396501) - (xy 123.633947 82.396502) (xy 123.805036 82.4236) (xy 123.805039 82.4236) (xy 123.978264 82.4236) - (xy 124.149352 82.396502) (xy 124.149356 82.396501) (xy 124.314088 82.342976) (xy 124.31409 82.342974) - (xy 124.314095 82.342973) (xy 124.468438 82.264332) (xy 124.608578 82.162514) (xy 124.731064 82.040028) - (xy 124.832882 81.899888) (xy 124.911523 81.745545) (xy 124.911524 81.74554) (xy 124.911526 81.745538) - (xy 124.965051 81.580806) (xy 124.965052 81.580802) (xy 124.99215 81.409714) (xy 124.99215 81.236485) - (xy 124.965052 81.065397) (xy 124.965051 81.065393) (xy 124.911526 80.900661) (xy 124.911524 80.900658) - (xy 124.911523 80.900657) (xy 124.911523 80.900655) (xy 124.832882 80.746312) (xy 124.731064 80.606172) - (xy 124.608578 80.483686) (xy 124.468438 80.381868) (xy 124.468437 80.381867) (xy 124.468435 80.381866) - (xy 124.314095 80.303227) (xy 124.195691 80.264755) (xy 124.146191 80.228791) (xy 124.127284 80.1706) - (xy 124.146191 80.112409) (xy 124.195692 80.076445) (xy 124.226284 80.0716) (xy 126.097016 80.0716) - (xy 126.155207 80.090507) (xy 126.191171 80.140007) (xy 126.191171 80.201193) (xy 126.155207 80.250693) - (xy 126.127609 80.264755) (xy 126.009204 80.303227) (xy 125.854864 80.381866) (xy 125.714723 80.483685) - (xy 125.592235 80.606173) (xy 125.490416 80.746314) (xy 125.411775 80.900658) (xy 125.411773 80.900661) - (xy 125.358248 81.065393) (xy 125.358247 81.065397) (xy 125.33115 81.236485) (xy 125.33115 81.409714) - (xy 125.358247 81.580802) (xy 125.358248 81.580806) (xy 125.411773 81.745538) (xy 125.411775 81.745541) - (xy 125.484052 81.887395) (xy 125.490418 81.899888) (xy 125.592236 82.040028) (xy 125.714722 82.162514) - (xy 125.854862 82.264332) (xy 126.009205 82.342973) (xy 126.009207 82.342973) (xy 126.009208 82.342974) - (xy 126.009211 82.342976) (xy 126.173943 82.396501) (xy 126.173947 82.396502) (xy 126.345036 82.4236) - (xy 126.345039 82.4236) (xy 126.518264 82.4236) (xy 126.689352 82.396502) (xy 126.689356 82.396501) - (xy 126.854088 82.342976) (xy 126.85409 82.342974) (xy 126.854095 82.342973) (xy 127.008438 82.264332) - (xy 127.148578 82.162514) (xy 127.271064 82.040028) (xy 127.372882 81.899888) (xy 127.451523 81.745545) - (xy 127.451524 81.74554) (xy 127.451526 81.745538) (xy 127.505051 81.580806) (xy 127.505052 81.580802) - (xy 127.53215 81.409714) (xy 127.53215 81.236485) (xy 127.505052 81.065397) (xy 127.505051 81.065393) - (xy 127.451526 80.900661) (xy 127.451524 80.900658) (xy 127.451523 80.900657) (xy 127.451523 80.900655) - (xy 127.372882 80.746312) (xy 127.271064 80.606172) (xy 127.148578 80.483686) (xy 127.008438 80.381868) - (xy 127.008437 80.381867) (xy 127.008435 80.381866) (xy 126.854095 80.303227) (xy 126.735691 80.264755) - (xy 126.686191 80.228791) (xy 126.667284 80.1706) (xy 126.686191 80.112409) (xy 126.735692 80.076445) - (xy 126.766284 80.0716) (xy 128.637016 80.0716) (xy 128.695207 80.090507) (xy 128.731171 80.140007) - (xy 128.731171 80.201193) (xy 128.695207 80.250693) (xy 128.667609 80.264755) (xy 128.549204 80.303227) - (xy 128.394864 80.381866) (xy 128.254723 80.483685) (xy 128.132235 80.606173) (xy 128.030416 80.746314) - (xy 127.951775 80.900658) (xy 127.951773 80.900661) (xy 127.898248 81.065393) (xy 127.898247 81.065397) - (xy 127.87115 81.236485) (xy 127.87115 81.409714) (xy 127.898247 81.580802) (xy 127.898248 81.580806) - (xy 127.951773 81.745538) (xy 127.951775 81.745541) (xy 128.024052 81.887395) (xy 128.030418 81.899888) - (xy 128.132236 82.040028) (xy 128.254722 82.162514) (xy 128.394862 82.264332) (xy 128.549205 82.342973) - (xy 128.549207 82.342973) (xy 128.549208 82.342974) (xy 128.549211 82.342976) (xy 128.713943 82.396501) - (xy 128.713947 82.396502) (xy 128.885036 82.4236) (xy 128.885039 82.4236) (xy 129.058264 82.4236) - (xy 129.229352 82.396502) (xy 129.229356 82.396501) (xy 129.394088 82.342976) (xy 129.39409 82.342974) - (xy 129.394095 82.342973) (xy 129.548438 82.264332) (xy 129.688578 82.162514) (xy 129.811064 82.040028) - (xy 129.912882 81.899888) (xy 129.991523 81.745545) (xy 129.991524 81.74554) (xy 129.991526 81.745538) - (xy 130.045051 81.580806) (xy 130.045052 81.580802) (xy 130.07215 81.409714) (xy 130.07215 81.236485) - (xy 130.045052 81.065397) (xy 130.045051 81.065393) (xy 129.991526 80.900661) (xy 129.991524 80.900658) - (xy 129.991523 80.900657) (xy 129.991523 80.900655) (xy 129.912882 80.746312) (xy 129.811064 80.606172) - (xy 129.688578 80.483686) (xy 129.548438 80.381868) (xy 129.548437 80.381867) (xy 129.548435 80.381866) - (xy 129.394095 80.303227) (xy 129.275691 80.264755) (xy 129.226191 80.228791) (xy 129.207284 80.1706) - (xy 129.226191 80.112409) (xy 129.275692 80.076445) (xy 129.306284 80.0716) (xy 132.697016 80.0716) - (xy 132.755207 80.090507) (xy 132.791171 80.140007) (xy 132.791171 80.201193) (xy 132.755207 80.250693) - (xy 132.727609 80.264755) (xy 132.609204 80.303227) (xy 132.454864 80.381866) (xy 132.314723 80.483685) - (xy 132.192235 80.606173) (xy 132.090416 80.746314) (xy 132.011775 80.900658) (xy 132.011773 80.900661) - (xy 131.958248 81.065393) (xy 131.958247 81.065397) (xy 131.93115 81.236485) (xy 131.93115 81.409714) - (xy 131.958247 81.580802) (xy 131.958248 81.580806) (xy 132.011773 81.745538) (xy 132.011775 81.745541) - (xy 132.084052 81.887395) (xy 132.090418 81.899888) (xy 132.192236 82.040028) (xy 132.314722 82.162514) - (xy 132.454862 82.264332) (xy 132.609205 82.342973) (xy 132.609207 82.342973) (xy 132.609208 82.342974) - (xy 132.609211 82.342976) (xy 132.773943 82.396501) (xy 132.773947 82.396502) (xy 132.945036 82.4236) - (xy 132.945039 82.4236) (xy 133.118264 82.4236) (xy 133.289352 82.396502) (xy 133.289356 82.396501) - (xy 133.454088 82.342976) (xy 133.45409 82.342974) (xy 133.454095 82.342973) (xy 133.608438 82.264332) - (xy 133.748578 82.162514) (xy 133.871064 82.040028) (xy 133.972882 81.899888) (xy 134.051523 81.745545) - (xy 134.051524 81.74554) (xy 134.051526 81.745538) (xy 134.105051 81.580806) (xy 134.105052 81.580802) - (xy 134.13215 81.409714) (xy 134.13215 81.236485) (xy 134.105052 81.065397) (xy 134.105051 81.065393) - (xy 134.051526 80.900661) (xy 134.051524 80.900658) (xy 134.051523 80.900657) (xy 134.051523 80.900655) - (xy 133.972882 80.746312) (xy 133.871064 80.606172) (xy 133.748578 80.483686) (xy 133.608438 80.381868) - (xy 133.608437 80.381867) (xy 133.608435 80.381866) (xy 133.454095 80.303227) (xy 133.335691 80.264755) - (xy 133.286191 80.228791) (xy 133.267284 80.1706) (xy 133.286191 80.112409) (xy 133.335692 80.076445) - (xy 133.366284 80.0716) (xy 135.237016 80.0716) (xy 135.295207 80.090507) (xy 135.331171 80.140007) - (xy 135.331171 80.201193) (xy 135.295207 80.250693) (xy 135.267609 80.264755) (xy 135.149204 80.303227) - (xy 134.994864 80.381866) (xy 134.854723 80.483685) (xy 134.732235 80.606173) (xy 134.630416 80.746314) - (xy 134.551775 80.900658) (xy 134.551773 80.900661) (xy 134.498248 81.065393) (xy 134.498247 81.065397) - (xy 134.47115 81.236485) (xy 134.47115 81.409714) (xy 134.498247 81.580802) (xy 134.498248 81.580806) - (xy 134.551773 81.745538) (xy 134.551775 81.745541) (xy 134.624052 81.887395) (xy 134.630418 81.899888) - (xy 134.732236 82.040028) (xy 134.854722 82.162514) (xy 134.994862 82.264332) (xy 135.149205 82.342973) - (xy 135.149207 82.342973) (xy 135.149208 82.342974) (xy 135.149211 82.342976) (xy 135.313943 82.396501) - (xy 135.313947 82.396502) (xy 135.485036 82.4236) (xy 135.485039 82.4236) (xy 135.658264 82.4236) - (xy 135.829352 82.396502) (xy 135.829356 82.396501) (xy 135.994088 82.342976) (xy 135.99409 82.342974) - (xy 135.994095 82.342973) (xy 136.148438 82.264332) (xy 136.288578 82.162514) (xy 136.411064 82.040028) - (xy 136.512882 81.899888) (xy 136.591523 81.745545) (xy 136.591524 81.74554) (xy 136.591526 81.745538) - (xy 136.645051 81.580806) (xy 136.645052 81.580802) (xy 136.67215 81.409714) (xy 136.67215 81.236485) - (xy 136.645052 81.065397) (xy 136.645051 81.065393) (xy 136.591526 80.900661) (xy 136.591524 80.900658) - (xy 136.591523 80.900657) (xy 136.591523 80.900655) (xy 136.512882 80.746312) (xy 136.411064 80.606172) - (xy 136.288578 80.483686) (xy 136.148438 80.381868) (xy 136.148437 80.381867) (xy 136.148435 80.381866) - (xy 135.994095 80.303227) (xy 135.875691 80.264755) (xy 135.826191 80.228791) (xy 135.807284 80.1706) - (xy 135.826191 80.112409) (xy 135.875692 80.076445) (xy 135.906284 80.0716) (xy 137.777016 80.0716) - (xy 137.835207 80.090507) (xy 137.871171 80.140007) (xy 137.871171 80.201193) (xy 137.835207 80.250693) - (xy 137.807609 80.264755) (xy 137.689204 80.303227) (xy 137.534864 80.381866) (xy 137.394723 80.483685) - (xy 137.272235 80.606173) (xy 137.170416 80.746314) (xy 137.091775 80.900658) (xy 137.091773 80.900661) - (xy 137.038248 81.065393) (xy 137.038247 81.065397) (xy 137.01115 81.236485) (xy 137.01115 81.409714) - (xy 137.038247 81.580802) (xy 137.038248 81.580806) (xy 137.091773 81.745538) (xy 137.091775 81.745541) - (xy 137.164052 81.887395) (xy 137.170418 81.899888) (xy 137.272236 82.040028) (xy 137.394722 82.162514) - (xy 137.534862 82.264332) (xy 137.689205 82.342973) (xy 137.689207 82.342973) (xy 137.689208 82.342974) - (xy 137.689211 82.342976) (xy 137.853943 82.396501) (xy 137.853947 82.396502) (xy 138.025036 82.4236) - (xy 138.025039 82.4236) (xy 138.198264 82.4236) (xy 138.369352 82.396502) (xy 138.369356 82.396501) - (xy 138.534088 82.342976) (xy 138.53409 82.342974) (xy 138.534095 82.342973) (xy 138.688438 82.264332) - (xy 138.828578 82.162514) (xy 138.951064 82.040028) (xy 139.052882 81.899888) (xy 139.131523 81.745545) - (xy 139.131524 81.74554) (xy 139.131526 81.745538) (xy 139.185051 81.580806) (xy 139.185052 81.580802) - (xy 139.21215 81.409714) (xy 139.21215 81.236485) (xy 139.185052 81.065397) (xy 139.185051 81.065393) - (xy 139.131526 80.900661) (xy 139.131524 80.900658) (xy 139.131523 80.900657) (xy 139.131523 80.900655) - (xy 139.052882 80.746312) (xy 138.951064 80.606172) (xy 138.828578 80.483686) (xy 138.688438 80.381868) - (xy 138.688437 80.381867) (xy 138.688435 80.381866) (xy 138.534095 80.303227) (xy 138.415691 80.264755) - (xy 138.366191 80.228791) (xy 138.347284 80.1706) (xy 138.366191 80.112409) (xy 138.415692 80.076445) - (xy 138.446284 80.0716) (xy 140.317016 80.0716) (xy 140.375207 80.090507) (xy 140.411171 80.140007) - (xy 140.411171 80.201193) (xy 140.375207 80.250693) (xy 140.347609 80.264755) (xy 140.229204 80.303227) - (xy 140.074864 80.381866) (xy 139.934723 80.483685) (xy 139.812235 80.606173) (xy 139.710416 80.746314) - (xy 139.631775 80.900658) (xy 139.631773 80.900661) (xy 139.578248 81.065393) (xy 139.578247 81.065397) - (xy 139.55115 81.236485) (xy 139.55115 81.409714) (xy 139.578247 81.580802) (xy 139.578248 81.580806) - (xy 139.631773 81.745538) (xy 139.631775 81.745541) (xy 139.704052 81.887395) (xy 139.710418 81.899888) - (xy 139.812236 82.040028) (xy 139.934722 82.162514) (xy 140.074862 82.264332) (xy 140.229205 82.342973) - (xy 140.229207 82.342973) (xy 140.229208 82.342974) (xy 140.229211 82.342976) (xy 140.393943 82.396501) - (xy 140.393947 82.396502) (xy 140.565036 82.4236) (xy 140.565039 82.4236) (xy 140.738264 82.4236) - (xy 140.909352 82.396502) (xy 140.909356 82.396501) (xy 141.074088 82.342976) (xy 141.07409 82.342974) - (xy 141.074095 82.342973) (xy 141.228438 82.264332) (xy 141.368578 82.162514) (xy 141.491064 82.040028) - (xy 141.592882 81.899888) (xy 141.671523 81.745545) (xy 141.671524 81.74554) (xy 141.671526 81.745538) - (xy 141.725051 81.580806) (xy 141.725052 81.580802) (xy 141.75215 81.409714) (xy 141.75215 81.236485) - (xy 141.725052 81.065397) (xy 141.725051 81.065393) (xy 141.671526 80.900661) (xy 141.671524 80.900658) - (xy 141.671523 80.900657) (xy 141.671523 80.900655) (xy 141.592882 80.746312) (xy 141.491064 80.606172) - (xy 141.368578 80.483686) (xy 141.228438 80.381868) (xy 141.228437 80.381867) (xy 141.228435 80.381866) - (xy 141.074095 80.303227) (xy 140.955691 80.264755) (xy 140.906191 80.228791) (xy 140.887284 80.1706) - (xy 140.906191 80.112409) (xy 140.955692 80.076445) (xy 140.986284 80.0716) (xy 142.857016 80.0716) - (xy 142.915207 80.090507) (xy 142.951171 80.140007) (xy 142.951171 80.201193) (xy 142.915207 80.250693) - (xy 142.887609 80.264755) (xy 142.769204 80.303227) (xy 142.614864 80.381866) (xy 142.474723 80.483685) - (xy 142.352235 80.606173) (xy 142.250416 80.746314) (xy 142.171775 80.900658) (xy 142.171773 80.900661) - (xy 142.118248 81.065393) (xy 142.118247 81.065397) (xy 142.09115 81.236485) (xy 142.09115 81.409714) - (xy 142.118247 81.580802) (xy 142.118248 81.580806) (xy 142.171773 81.745538) (xy 142.171775 81.745541) - (xy 142.244052 81.887395) (xy 142.250418 81.899888) (xy 142.352236 82.040028) (xy 142.474722 82.162514) - (xy 142.614862 82.264332) (xy 142.769205 82.342973) (xy 142.769207 82.342973) (xy 142.769208 82.342974) - (xy 142.769211 82.342976) (xy 142.933943 82.396501) (xy 142.933947 82.396502) (xy 143.105036 82.4236) - (xy 143.105039 82.4236) (xy 143.278264 82.4236) (xy 143.449352 82.396502) (xy 143.449356 82.396501) - (xy 143.614088 82.342976) (xy 143.61409 82.342974) (xy 143.614095 82.342973) (xy 143.768438 82.264332) - (xy 143.908578 82.162514) (xy 144.031064 82.040028) (xy 144.132882 81.899888) (xy 144.211523 81.745545) - (xy 144.211524 81.74554) (xy 144.211526 81.745538) (xy 144.265051 81.580806) (xy 144.265052 81.580802) - (xy 144.29215 81.409714) (xy 144.29215 81.236485) (xy 144.265052 81.065397) (xy 144.265051 81.065393) - (xy 144.211526 80.900661) (xy 144.211524 80.900658) (xy 144.211523 80.900657) (xy 144.211523 80.900655) - (xy 144.132882 80.746312) (xy 144.031064 80.606172) (xy 143.908578 80.483686) (xy 143.768438 80.381868) - (xy 143.768437 80.381867) (xy 143.768435 80.381866) (xy 143.614095 80.303227) (xy 143.495691 80.264755) - (xy 143.446191 80.228791) (xy 143.427284 80.1706) (xy 143.446191 80.112409) (xy 143.495692 80.076445) - (xy 143.526284 80.0716) (xy 145.397016 80.0716) (xy 145.455207 80.090507) (xy 145.491171 80.140007) - (xy 145.491171 80.201193) (xy 145.455207 80.250693) (xy 145.427609 80.264755) (xy 145.309204 80.303227) - (xy 145.154864 80.381866) (xy 145.014723 80.483685) (xy 144.892235 80.606173) (xy 144.790416 80.746314) - (xy 144.711775 80.900658) (xy 144.711773 80.900661) (xy 144.658248 81.065393) (xy 144.658247 81.065397) - (xy 144.63115 81.236485) (xy 144.63115 81.409714) (xy 144.658247 81.580802) (xy 144.658248 81.580806) - (xy 144.711773 81.745538) (xy 144.711775 81.745541) (xy 144.784052 81.887395) (xy 144.790418 81.899888) - (xy 144.892236 82.040028) (xy 145.014722 82.162514) (xy 145.154862 82.264332) (xy 145.309205 82.342973) - (xy 145.309207 82.342973) (xy 145.309208 82.342974) (xy 145.309211 82.342976) (xy 145.473943 82.396501) - (xy 145.473947 82.396502) (xy 145.645036 82.4236) (xy 145.645039 82.4236) (xy 145.818264 82.4236) - (xy 145.989352 82.396502) (xy 145.989356 82.396501) (xy 146.154088 82.342976) (xy 146.15409 82.342974) - (xy 146.154095 82.342973) (xy 146.308438 82.264332) (xy 146.448578 82.162514) (xy 146.571064 82.040028) - (xy 146.672882 81.899888) (xy 146.751523 81.745545) (xy 146.751524 81.74554) (xy 146.751526 81.745538) - (xy 146.805051 81.580806) (xy 146.805052 81.580802) (xy 146.83215 81.409714) (xy 146.83215 81.236485) - (xy 146.805052 81.065397) (xy 146.805051 81.065393) (xy 146.751526 80.900661) (xy 146.751524 80.900658) - (xy 146.751523 80.900657) (xy 146.751523 80.900655) (xy 146.672882 80.746312) (xy 146.571064 80.606172) - (xy 146.448578 80.483686) (xy 146.308438 80.381868) (xy 146.308437 80.381867) (xy 146.308435 80.381866) - (xy 146.154095 80.303227) (xy 146.035691 80.264755) (xy 145.986191 80.228791) (xy 145.967284 80.1706) - (xy 145.986191 80.112409) (xy 146.035692 80.076445) (xy 146.066284 80.0716) (xy 147.937016 80.0716) - (xy 147.995207 80.090507) (xy 148.031171 80.140007) (xy 148.031171 80.201193) (xy 147.995207 80.250693) - (xy 147.967609 80.264755) (xy 147.849204 80.303227) (xy 147.694864 80.381866) (xy 147.554723 80.483685) - (xy 147.432235 80.606173) (xy 147.330416 80.746314) (xy 147.251775 80.900658) (xy 147.251773 80.900661) - (xy 147.198248 81.065393) (xy 147.198247 81.065397) (xy 147.17115 81.236485) (xy 147.17115 81.409714) - (xy 147.198247 81.580802) (xy 147.198248 81.580806) (xy 147.251773 81.745538) (xy 147.251775 81.745541) - (xy 147.324052 81.887395) (xy 147.330418 81.899888) (xy 147.432236 82.040028) (xy 147.554722 82.162514) - (xy 147.694862 82.264332) (xy 147.849205 82.342973) (xy 147.849207 82.342973) (xy 147.849208 82.342974) - (xy 147.849211 82.342976) (xy 148.013943 82.396501) (xy 148.013947 82.396502) (xy 148.185036 82.4236) - (xy 148.185039 82.4236) (xy 148.358264 82.4236) (xy 148.529352 82.396502) (xy 148.529356 82.396501) - (xy 148.694088 82.342976) (xy 148.69409 82.342974) (xy 148.694095 82.342973) (xy 148.848438 82.264332) - (xy 148.988578 82.162514) (xy 149.111064 82.040028) (xy 149.158705 81.974455) (xy 149.208202 81.938493) - (xy 149.269388 81.938492) (xy 149.3088 81.962643) (xy 155.489737 88.14358) (xy 155.489739 88.143581) - (xy 155.48974 88.143582) (xy 155.489741 88.143583) (xy 155.581058 88.196305) (xy 155.581056 88.196305) - (xy 155.58106 88.196306) (xy 155.581062 88.196307) (xy 155.682923 88.2236) (xy 173.235933 88.2236) - (xy 173.294124 88.242507) (xy 173.330088 88.292007) (xy 173.330088 88.353193) (xy 173.327397 88.360485) - (xy 173.253638 88.538555) (xy 173.253638 88.538557) (xy 173.21615 88.727019) (xy 173.21615 88.91918) - (xy 173.253638 89.107642) (xy 173.253638 89.107644) (xy 173.327171 89.28517) (xy 173.327171 89.285171) - (xy 173.433929 89.444944) (xy 173.569805 89.58082) (xy 173.729577 89.687577) (xy 173.835945 89.731636) - (xy 173.88247 89.771373) (xy 173.896754 89.830867) (xy 173.873339 89.887395) (xy 173.835945 89.914564) - (xy 173.729577 89.958622) (xy 173.569805 90.065379) (xy 173.433929 90.201255) (xy 173.327171 90.361028) - (xy 173.327171 90.361029) (xy 173.253638 90.538555) (xy 173.253638 90.538557) (xy 173.21615 90.727019) - (xy 173.21615 90.91918) (xy 173.218732 90.932158) (xy 173.251305 91.095916) (xy 173.253638 91.107642) - (xy 173.253638 91.107644) (xy 173.327171 91.28517) (xy 173.327171 91.285171) (xy 173.43046 91.439752) - (xy 173.43393 91.444945) (xy 173.569805 91.58082) (xy 173.63348 91.623367) (xy 173.67136 91.671416) - (xy 173.673762 91.732555) (xy 173.639769 91.783428) (xy 173.623425 91.793891) (xy 173.575821 91.818146) - (xy 173.555218 91.833114) (xy 174.145204 92.4231) (xy 174.138989 92.4231) (xy 174.037256 92.450359) - (xy 173.946044 92.50302) (xy 173.87157 92.577494) (xy 173.818909 92.668706) (xy 173.79165 92.770439) - (xy 173.79165 92.776654) (xy 173.201664 92.186668) (xy 173.186698 92.207268) (xy 173.102734 92.372058) - (xy 173.045582 92.547956) (xy 173.01665 92.730622) (xy 173.01665 92.915577) (xy 173.045582 93.098243) - (xy 173.102734 93.274141) (xy 173.186696 93.438927) (xy 173.186701 93.438935) (xy 173.201664 93.459529) - (xy 173.79165 92.869543) (xy 173.79165 92.875761) (xy 173.818909 92.977494) (xy 173.87157 93.068706) - (xy 173.946044 93.14318) (xy 174.037256 93.195841) (xy 174.138989 93.2231) (xy 174.145202 93.2231) - (xy 173.555218 93.813084) (xy 173.575814 93.828048) (xy 173.575822 93.828053) (xy 173.740608 93.912015) - (xy 173.916506 93.969167) (xy 174.099173 93.9981) (xy 174.284127 93.9981) (xy 174.466793 93.969167) - (xy 174.642691 93.912015) (xy 174.807487 93.828047) (xy 174.82808 93.813084) (xy 174.238096 93.2231) - (xy 174.244311 93.2231) (xy 174.346044 93.195841) (xy 174.437256 93.14318) (xy 174.51173 93.068706) - (xy 174.564391 92.977494) (xy 174.59165 92.875761) (xy 174.59165 92.869546) (xy 175.181634 93.45953) - (xy 175.196597 93.438937) (xy 175.280565 93.274141) (xy 175.337717 93.098243) (xy 175.36665 92.915577) - (xy 175.36665 92.730622) (xy 175.337717 92.547956) (xy 175.280565 92.372058) (xy 175.196603 92.207272) - (xy 175.196598 92.207264) (xy 175.181634 92.186668) (xy 174.59165 92.776652) (xy 174.59165 92.770439) - (xy 174.564391 92.668706) (xy 174.51173 92.577494) (xy 174.437256 92.50302) (xy 174.346044 92.450359) - (xy 174.244311 92.4231) (xy 174.238094 92.4231) (xy 174.82808 91.833114) (xy 174.807485 91.818151) - (xy 174.807477 91.818146) (xy 174.759875 91.793892) (xy 174.71661 91.750627) (xy 174.707039 91.690195) - (xy 174.734816 91.635678) (xy 174.74981 91.623372) (xy 174.813495 91.58082) (xy 174.94937 91.444945) - (xy 175.056127 91.285173) (xy 175.129662 91.107643) (xy 175.16715 90.919178) (xy 175.16715 90.727022) - (xy 175.129662 90.538557) (xy 175.056128 90.361029) (xy 175.056128 90.361028) (xy 174.94937 90.201255) - (xy 174.813494 90.065379) (xy 174.65372 89.958621) (xy 174.547355 89.914564) (xy 174.500829 89.874828) - (xy 174.486545 89.815333) (xy 174.50996 89.758805) (xy 174.547355 89.731636) (xy 174.584786 89.716131) - (xy 174.653723 89.687577) (xy 174.813495 89.58082) (xy 174.94937 89.444945) (xy 175.056127 89.285173) - (xy 175.129662 89.107643) (xy 175.16715 88.919178) (xy 175.16715 88.727022) (xy 175.129662 88.538557) - (xy 175.083276 88.42657) (xy 175.055903 88.360485) (xy 175.051102 88.299489) (xy 175.083072 88.24732) - (xy 175.1396 88.223905) (xy 175.147367 88.2236) (xy 195.585933 88.2236) (xy 195.644124 88.242507) - (xy 195.680088 88.292007) (xy 195.680088 88.353193) (xy 195.677397 88.360485) (xy 195.603638 88.538555) - (xy 195.603638 88.538557) (xy 195.56615 88.727019) (xy 195.56615 88.91918) (xy 195.603638 89.107642) - (xy 195.603638 89.107644) (xy 195.677171 89.28517) (xy 195.677171 89.285171) (xy 195.783929 89.444944) - (xy 195.919805 89.58082) (xy 196.079577 89.687577) (xy 196.185945 89.731636) (xy 196.23247 89.771373) - (xy 196.246754 89.830867) (xy 196.223339 89.887395) (xy 196.185945 89.914564) (xy 196.079577 89.958622) - (xy 195.919805 90.065379) (xy 195.783929 90.201255) (xy 195.677171 90.361028) (xy 195.677171 90.361029) - (xy 195.603638 90.538555) (xy 195.603638 90.538557) (xy 195.56615 90.727019) (xy 195.56615 90.91918) - (xy 195.568732 90.932158) (xy 195.601305 91.095916) (xy 195.603638 91.107642) (xy 195.603638 91.107644) - (xy 195.677171 91.28517) (xy 195.677171 91.285171) (xy 195.783929 91.444944) (xy 195.919805 91.58082) - (xy 196.079577 91.687577) (xy 196.185945 91.731636) (xy 196.23247 91.771373) (xy 196.246754 91.830867) - (xy 196.223339 91.887395) (xy 196.185945 91.914564) (xy 196.079577 91.958622) (xy 195.919805 92.065379) - (xy 195.783929 92.201255) (xy 195.677171 92.361028) (xy 195.677171 92.361029) (xy 195.603638 92.538555) - (xy 195.603638 92.538557) (xy 195.56615 92.727019) (xy 195.56615 92.91918) (xy 195.603638 93.107642) - (xy 195.603638 93.107644) (xy 195.677171 93.28517) (xy 195.677171 93.285171) (xy 195.783929 93.444944) - (xy 195.78393 93.444945) (xy 195.919805 93.58082) (xy 196.079577 93.687577) (xy 196.079578 93.687577) - (xy 196.079579 93.687578) (xy 196.089818 93.691819) (xy 196.257107 93.761112) (xy 196.445572 93.7986) - (xy 196.445573 93.7986) (xy 196.637727 93.7986) (xy 196.637728 93.7986) (xy 196.826193 93.761112) - (xy 197.003723 93.687577) (xy 197.163495 93.58082) (xy 197.29937 93.444945) (xy 197.406127 93.285173) - (xy 197.479662 93.107643) (xy 197.51715 92.919178) (xy 197.51715 92.727022) (xy 197.479662 92.538557) - (xy 197.422896 92.401511) (xy 197.406128 92.361029) (xy 197.406128 92.361028) (xy 197.29937 92.201255) - (xy 197.163494 92.065379) (xy 197.00372 91.958621) (xy 196.897355 91.914564) (xy 196.850829 91.874828) - (xy 196.836545 91.815333) (xy 196.85996 91.758805) (xy 196.897355 91.731636) (xy 196.967852 91.702435) - (xy 197.003723 91.687577) (xy 197.163495 91.58082) (xy 197.29937 91.444945) (xy 197.406127 91.285173) - (xy 197.479662 91.107643) (xy 197.51715 90.919178) (xy 197.51715 90.727022) (xy 197.479662 90.538557) - (xy 197.406128 90.361029) (xy 197.406128 90.361028) (xy 197.29937 90.201255) (xy 197.163494 90.065379) - (xy 197.00372 89.958621) (xy 196.897355 89.914564) (xy 196.850829 89.874828) (xy 196.836545 89.815333) - (xy 196.85996 89.758805) (xy 196.897355 89.731636) (xy 196.934786 89.716131) (xy 197.003723 89.687577) - (xy 197.163495 89.58082) (xy 197.29937 89.444945) (xy 197.406127 89.285173) (xy 197.479662 89.107643) - (xy 197.51715 88.919178) (xy 197.51715 88.727022) (xy 197.479662 88.538557) (xy 197.433276 88.42657) - (xy 197.405903 88.360485) (xy 197.401102 88.299489) (xy 197.433072 88.24732) (xy 197.4896 88.223905) - (xy 197.497367 88.2236) (xy 207.484749 88.2236) (xy 207.54294 88.242507) (xy 207.554753 88.252596) - (xy 208.794037 89.49188) (xy 208.794039 89.491881) (xy 208.79404 89.491882) (xy 208.794041 89.491883) - (xy 208.885358 89.544605) (xy 208.885356 89.544605) (xy 208.88536 89.544606) (xy 208.885362 89.544607) - (xy 208.987223 89.5719) (xy 208.996697 89.5719) (xy 209.054888 89.590807) (xy 209.090852 89.640307) - (xy 209.090852 89.701493) (xy 209.083975 89.716413) (xy 209.08442 89.71664) (xy 209.000438 89.881462) - (xy 208.944478 90.053693) (xy 208.91615 90.23255) (xy 208.91615 90.413649) (xy 208.944478 90.592506) - (xy 209.000438 90.764737) (xy 209.063609 90.888718) (xy 209.082654 90.926094) (xy 209.189097 91.072601) - (xy 209.317149 91.200653) (xy 209.463656 91.307096) (xy 209.463658 91.307097) (xy 209.601175 91.377166) - (xy 209.64444 91.420431) (xy 209.654011 91.480863) (xy 209.626233 91.53538) (xy 209.586824 91.55953) - (xy 209.548438 91.572002) (xy 209.359097 91.668475) (xy 209.187185 91.793377) (xy 209.036927 91.943635) - (xy 208.912025 92.115547) (xy 208.815554 92.304884) (xy 208.749891 92.506977) (xy 208.739418 92.573099) - (xy 208.739419 92.5731) (xy 209.787504 92.5731) (xy 209.74902 92.639757) (xy 209.71665 92.760565) - (xy 209.71665 92.885635) (xy 209.74902 93.006443) (xy 209.787504 93.0731) (xy 208.739419 93.0731) - (xy 208.749891 93.139222) (xy 208.815554 93.341315) (xy 208.912025 93.530652) (xy 209.036927 93.702564) - (xy 209.187185 93.852822) (xy 209.359098 93.977724) (xy 209.391008 93.993983) (xy 209.434273 94.037248) - (xy 209.443844 94.09768) (xy 209.416067 94.152197) (xy 209.36155 94.179974) (xy 209.357869 94.180487) - (xy 209.335083 94.183223) (xy 209.19431 94.238737) (xy 209.194306 94.23874) (xy 209.073731 94.330175) - (xy 209.073725 94.330181) (xy 208.98229 94.450756) (xy 208.982288 94.450759) (xy 208.978676 94.45992) - (xy 208.939738 94.507117) (xy 208.886579 94.5226) (xy 179.662805 94.5226) (xy 179.508155 94.553361) - (xy 179.508149 94.553363) (xy 179.479902 94.565064) (xy 179.442016 94.5726) (xy 173.999104 94.5726) - (xy 173.907671 94.590788) (xy 173.844453 94.603363) (xy 173.844451 94.603363) (xy 173.698775 94.663703) - (xy 173.698763 94.663709) (xy 173.571722 94.748597) (xy 173.57172 94.748599) (xy 173.567663 94.751309) - (xy 171.138364 97.180607) (xy 171.138361 97.180611) (xy 171.050759 97.311714) (xy 171.050753 97.311725) - (xy 170.990413 97.457401) (xy 170.990413 97.457403) (xy 170.95965 97.612055) (xy 170.95965 97.769744) - (xy 170.990413 97.924396) (xy 170.990413 97.924398) (xy 171.050753 98.070074) (xy 171.050759 98.070085) - (xy 171.081051 98.115419) (xy 171.138361 98.201189) (xy 171.249861 98.312689) (xy 171.312735 98.3547) - (xy 171.380964 98.40029) (xy 171.380975 98.400296) (xy 171.434788 98.422585) (xy 171.526653 98.460637) - (xy 171.681308 98.4914) (xy 171.681309 98.4914) (xy 171.838991 98.4914) (xy 171.838992 98.4914) - (xy 171.993647 98.460637) (xy 172.139329 98.400294) (xy 172.169188 98.380343) (xy 175.08345 98.380343) - (xy 175.08345 98.538457) (xy 175.124373 98.691184) (xy 175.20343 98.828116) (xy 175.315234 98.93992) - (xy 175.452166 99.018977) (xy 175.604893 99.0599) (xy 175.604895 99.0599) (xy 175.763005 99.0599) - (xy 175.763007 99.0599) (xy 175.915734 99.018977) (xy 176.052666 98.93992) (xy 176.16447 98.828116) - (xy 176.243527 98.691184) (xy 176.28445 98.538457) (xy 176.28445 98.380343) (xy 176.243527 98.227616) - (xy 176.16447 98.090684) (xy 176.052666 97.97888) (xy 175.915734 97.899823) (xy 175.763007 97.8589) - (xy 175.604893 97.8589) (xy 175.452166 97.899823) (xy 175.315234 97.97888) (xy 175.20343 98.090684) - (xy 175.124373 98.227616) (xy 175.08345 98.380343) (xy 172.169188 98.380343) (xy 172.270439 98.312689) - (xy 173.060027 97.523101) (xy 178.466651 97.523101) (xy 178.466651 97.573086) (xy 178.477142 97.675787) + (xy 208.714418 118.573099) (xy 201.561597 118.573099) (xy 205.7052 114.429496) (xy 205.759717 114.401719) + (xy 205.775204 114.4005) (xy 209.614068 114.4005) (xy 209.614069 114.4005) (xy 209.739744 114.375501) + (xy 209.858127 114.326465) (xy 209.964669 114.255276) (xy 210.055276 114.164669) (xy 210.126465 114.058127) + (xy 210.175501 113.939744) (xy 210.2005 113.814069) (xy 210.2005 113.685931) (xy 210.175501 113.560256) + (xy 210.126465 113.441873) (xy 210.126463 113.44187) (xy 210.126461 113.441866) (xy 210.09695 113.3977) + (xy 210.055276 113.335331) (xy 209.964669 113.244724) (xy 209.901677 113.202634) (xy 209.858133 113.173538) + (xy 209.858125 113.173534) (xy 209.739747 113.1245) (xy 209.739745 113.124499) (xy 209.739744 113.124499) + (xy 209.614069 113.0995) (xy 207.274203 113.0995) (xy 207.216012 113.080593) (xy 207.180048 113.031093) + (xy 207.180048 112.969907) (xy 207.204199 112.930497) (xy 207.878165 112.256529) (xy 207.886316 112.248378) + (xy 207.886319 112.248377) (xy 207.976927 112.157769) (xy 208.048115 112.051227) (xy 208.097151 111.932844) + (xy 208.122149 111.807169) (xy 208.122149 111.679031) (xy 208.097151 111.553356) (xy 208.066679 111.479791) + (xy 208.048116 111.434975) (xy 208.039392 111.421919) (xy 207.976927 111.328431) (xy 205.685819 109.037323) + (xy 205.682754 109.035275) (xy 205.579276 108.966134) (xy 205.460892 108.917098) (xy 205.460887 108.917097) + (xy 205.455873 108.916099) (xy 205.455873 108.9161) (xy 205.335221 108.8921) (xy 205.335219 108.8921) + (xy 200.94425 108.8921) (xy 200.886059 108.873193) (xy 200.850095 108.823693) (xy 200.84525 108.7931) + (xy 200.84525 103.549432) (xy 200.84525 103.549431) (xy 200.820251 103.423756) (xy 200.771215 103.305373) + (xy 200.771213 103.30537) (xy 200.771211 103.305366) (xy 200.738078 103.25578) (xy 200.700026 103.198831) + (xy 200.609419 103.108224) (xy 200.103791 102.602596) (xy 199.59448 102.093284) (xy 199.568976 102.049344) + (xy 199.567149 102.042649) (xy 199.567149 102.041582) (xy 199.552296 101.947796) (xy 199.528541 101.901175) + (xy 199.525864 101.891364) (xy 199.526862 101.870469) (xy 199.523591 101.849814) (xy 199.52829 101.84059) + (xy 199.528785 101.830248) (xy 199.541872 101.813932) (xy 199.551368 101.795297) (xy 199.560592 101.790596) + (xy 199.567071 101.782521) (xy 199.587247 101.777014) (xy 199.605884 101.767519) (xy 199.621372 101.7663) + (xy 202.147242 101.7663) (xy 202.205433 101.785207) (xy 202.217246 101.795296) (xy 209.037154 108.615204) + (xy 209.064931 108.669721) (xy 209.06615 108.685208) (xy 209.06615 108.95462) (xy 209.066151 108.954623) + (xy 209.081002 109.048399) (xy 209.081004 109.048404) (xy 209.1386 109.161442) (xy 209.228308 109.25115) + (xy 209.341346 109.308746) (xy 209.435131 109.3236) (xy 210.948168 109.323599) (xy 210.948171 109.323599) + (xy 210.948172 109.323598) (xy 210.995061 109.316172) (xy 211.041949 109.308747) (xy 211.041949 109.308746) + (xy 211.041954 109.308746) (xy 211.154992 109.25115) (xy 211.2447 109.161442) (xy 211.302296 109.048404) + (xy 211.31715 108.954619) (xy 211.317149 107.691582) (xy 211.317149 107.691578) (xy 211.317148 107.691576) + (xy 211.302297 107.5978) (xy 211.302296 107.597798) (xy 211.302296 107.597796) (xy 211.2447 107.484758) + (xy 211.154992 107.39505) (xy 211.041954 107.337454) (xy 211.041955 107.337454) (xy 210.948172 107.3226) + (xy 210.948169 107.3226) (xy 210.695417 107.3226) (xy 210.637226 107.303693) (xy 210.601262 107.254193) + (xy 210.601262 107.193007) (xy 210.637226 107.143507) (xy 210.664824 107.129445) (xy 210.834865 107.074195) + (xy 211.024202 106.977724) (xy 211.196114 106.852822) (xy 211.346372 106.702564) (xy 211.471274 106.530652) + (xy 211.567745 106.341315) (xy 211.633408 106.139222) (xy 211.643881 106.0731) (xy 210.595796 106.0731) + (xy 210.63428 106.006443) (xy 210.66665 105.885635) (xy 210.66665 105.760565) (xy 210.63428 105.639757) + (xy 210.595796 105.5731) (xy 211.643881 105.5731) (xy 211.643881 105.573099) (xy 211.633408 105.506977) + (xy 211.567745 105.304884) (xy 211.471274 105.115547) (xy 211.346372 104.943635) (xy 211.196114 104.793377) + (xy 211.024202 104.668475) (xy 210.834865 104.572004) (xy 210.632772 104.506341) (xy 210.547742 104.492873) + (xy 210.493226 104.465095) (xy 210.465449 104.410578) (xy 210.475021 104.350146) (xy 210.518286 104.306882) + (xy 210.543913 104.297995) (xy 210.608485 104.285151) (xy 210.790564 104.209732) (xy 210.954432 104.100239) + (xy 211.093789 103.960882) (xy 211.203282 103.797014) (xy 211.278701 103.614935) (xy 211.31715 103.421641) + (xy 211.31715 103.224559) (xy 211.278701 103.031265) (xy 211.203282 102.849186) (xy 211.093789 102.685318) + (xy 210.954432 102.545961) (xy 210.844938 102.472799) (xy 210.790563 102.436467) (xy 210.608485 102.361049) + (xy 210.415193 102.3226) (xy 210.415191 102.3226) (xy 209.968109 102.3226) (xy 209.968106 102.3226) + (xy 209.774815 102.361049) (xy 209.774813 102.361049) (xy 209.592736 102.436467) (xy 209.428868 102.545961) + (xy 209.428864 102.545964) (xy 209.289514 102.685314) (xy 209.289511 102.685318) (xy 209.180017 102.849186) + (xy 209.104599 103.031263) (xy 209.104599 103.031265) (xy 209.06615 103.224556) (xy 209.06615 103.421643) + (xy 209.07664 103.474376) (xy 209.103418 103.609) (xy 209.104599 103.614934) (xy 209.104599 103.614936) + (xy 209.180017 103.797013) (xy 209.189489 103.811189) (xy 209.289511 103.960882) (xy 209.428868 104.100239) + (xy 209.592736 104.209732) (xy 209.774815 104.285151) (xy 209.839384 104.297994) (xy 209.892767 104.327891) + (xy 209.918383 104.383456) (xy 209.906446 104.443465) (xy 209.861517 104.484998) (xy 209.835557 104.492873) + (xy 209.750527 104.506341) (xy 209.548434 104.572004) (xy 209.359097 104.668475) (xy 209.187185 104.793377) + (xy 209.036927 104.943635) (xy 208.912025 105.115547) (xy 208.815554 105.304884) (xy 208.749891 105.506977) + (xy 208.742827 105.551576) (xy 208.715049 105.606092) (xy 208.660532 105.633869) (xy 208.6001 105.624297) + (xy 208.575042 105.606092) (xy 205.856248 102.887298) (xy 203.135286 100.166336) (xy 203.070578 100.1231) + (xy 203.070578 100.123099) (xy 202.9878 100.067788) (xy 202.987797 100.067787) (xy 202.823914 99.999904) + (xy 202.649944 99.9653) (xy 202.649942 99.9653) (xy 202.649941 99.9653) (xy 177.276042 99.9653) + (xy 177.098658 99.9653) (xy 177.098655 99.9653) (xy 176.924684 99.999905) (xy 176.924682 99.999905) + (xy 176.842742 100.033845) (xy 176.842743 100.033846) (xy 176.760802 100.067787) (xy 176.760799 100.067788) + (xy 176.678022 100.123099) (xy 176.678022 100.1231) (xy 176.613317 100.166333) (xy 172.911154 103.868496) + (xy 172.856637 103.896273) (xy 172.796205 103.886702) (xy 172.75294 103.843437) (xy 172.74215 103.798492) + (xy 172.74215 103.208281) (xy 172.742149 103.208272) (xy 172.73378 103.166202) (xy 172.733417 103.164378) + (xy 172.700154 103.114596) (xy 172.690618 103.108224) (xy 172.650374 103.081334) (xy 172.65037 103.081332) + (xy 172.606477 103.0726) (xy 172.60647 103.0726) (xy 170.57683 103.0726) (xy 170.576822 103.0726) + (xy 170.532929 103.081332) (xy 170.532925 103.081334) (xy 170.483148 103.114594) (xy 170.483144 103.114598) + (xy 170.449884 103.164375) (xy 170.449882 103.164379) (xy 170.44115 103.208272) (xy 170.44115 103.8236) + (xy 170.422243 103.881791) (xy 170.372743 103.917755) (xy 170.34215 103.9226) (xy 169.551256 103.9226) + (xy 169.377286 103.957204) (xy 169.37728 103.957206) (xy 169.273508 104.000191) (xy 169.273507 104.000191) + (xy 169.213405 104.025085) (xy 169.213404 104.025085) (xy 169.073139 104.118809) (xy 169.073138 104.11881) + (xy 169.065914 104.123636) (xy 166.702746 106.486804) (xy 166.648229 106.514581) (xy 166.632742 106.5158) + (xy 165.04115 106.5158) (xy 164.982959 106.496893) (xy 164.946995 106.447393) (xy 164.94215 106.4168) + (xy 164.94215 103.208281) (xy 164.942149 103.208272) (xy 164.93378 103.166202) (xy 164.933417 103.164378) + (xy 164.900154 103.114596) (xy 164.890618 103.108224) (xy 164.850374 103.081334) (xy 164.85037 103.081332) + (xy 164.806477 103.0726) (xy 164.80647 103.0726) (xy 164.79115 103.0726) (xy 164.732959 103.053693) + (xy 164.696995 103.004193) (xy 164.69215 102.9736) (xy 164.69215 98.400091) (xy 175.23345 98.400091) + (xy 175.23345 98.518709) (xy 175.250764 98.583325) (xy 175.264152 98.63329) (xy 175.323457 98.736008) + (xy 175.323459 98.73601) (xy 175.323461 98.736013) (xy 175.407337 98.819889) (xy 175.407339 98.81989) + (xy 175.407341 98.819892) (xy 175.51006 98.879197) (xy 175.510061 98.879197) (xy 175.510064 98.879199) + (xy 175.624641 98.9099) (xy 175.624643 98.9099) (xy 175.743257 98.9099) (xy 175.743259 98.9099) + (xy 175.857836 98.879199) (xy 175.857838 98.879197) (xy 175.85784 98.879197) (xy 175.960558 98.819892) + (xy 175.960558 98.819891) (xy 175.960563 98.819889) (xy 176.044439 98.736013) (xy 176.052777 98.721571) + (xy 176.103747 98.63329) (xy 176.103747 98.633288) (xy 176.103749 98.633286) (xy 176.13445 98.518709) + (xy 176.13445 98.400091) (xy 176.103749 98.285514) (xy 176.103747 98.285511) (xy 176.103747 98.285509) + (xy 176.044442 98.182791) (xy 176.04444 98.182789) (xy 176.044439 98.182787) (xy 175.960563 98.098911) + (xy 175.96056 98.098909) (xy 175.960558 98.098907) (xy 175.857839 98.039602) (xy 175.85784 98.039602) + (xy 175.838773 98.034493) (xy 175.743259 98.0089) (xy 175.624641 98.0089) (xy 175.561458 98.02583) + (xy 175.510059 98.039602) (xy 175.407341 98.098907) (xy 175.323457 98.182791) (xy 175.264152 98.285509) + (xy 175.255875 98.3164) (xy 175.23345 98.400091) (xy 164.69215 98.400091) (xy 164.69215 92.730622) + (xy 173.01665 92.730622) (xy 173.01665 92.915577) (xy 173.045582 93.098243) (xy 173.102734 93.274141) + (xy 173.186696 93.438927) (xy 173.186701 93.438935) (xy 173.201664 93.459529) (xy 173.79165 92.869543) + (xy 173.79165 92.875761) (xy 173.818909 92.977494) (xy 173.87157 93.068706) (xy 173.946044 93.14318) + (xy 174.037256 93.195841) (xy 174.138989 93.2231) (xy 174.145202 93.2231) (xy 173.555218 93.813084) + (xy 173.575814 93.828048) (xy 173.575822 93.828053) (xy 173.740608 93.912015) (xy 173.916506 93.969167) + (xy 174.099173 93.9981) (xy 174.284127 93.9981) (xy 174.466793 93.969167) (xy 174.642691 93.912015) + (xy 174.807487 93.828047) (xy 174.82808 93.813084) (xy 174.238096 93.2231) (xy 174.244311 93.2231) + (xy 174.346044 93.195841) (xy 174.437256 93.14318) (xy 174.51173 93.068706) (xy 174.564391 92.977494) + (xy 174.59165 92.875761) (xy 174.59165 92.869546) (xy 175.181634 93.45953) (xy 175.196597 93.438937) + (xy 175.280565 93.274141) (xy 175.337717 93.098243) (xy 175.36665 92.915577) (xy 175.36665 92.730622) + (xy 195.36665 92.730622) (xy 195.36665 92.915577) (xy 195.395582 93.098243) (xy 195.452734 93.274141) + (xy 195.536696 93.438927) (xy 195.536701 93.438935) (xy 195.551664 93.459529) (xy 196.14165 92.869543) + (xy 196.14165 92.875761) (xy 196.168909 92.977494) (xy 196.22157 93.068706) (xy 196.296044 93.14318) + (xy 196.387256 93.195841) (xy 196.488989 93.2231) (xy 196.495202 93.2231) (xy 195.905218 93.813084) + (xy 195.925814 93.828048) (xy 195.925822 93.828053) (xy 196.090608 93.912015) (xy 196.266506 93.969167) + (xy 196.449173 93.9981) (xy 196.634127 93.9981) (xy 196.816793 93.969167) (xy 196.992691 93.912015) + (xy 197.157487 93.828047) (xy 197.17808 93.813084) (xy 196.588096 93.2231) (xy 196.594311 93.2231) + (xy 196.696044 93.195841) (xy 196.787256 93.14318) (xy 196.86173 93.068706) (xy 196.914391 92.977494) + (xy 196.94165 92.875761) (xy 196.94165 92.869546) (xy 197.531634 93.45953) (xy 197.546597 93.438937) + (xy 197.630565 93.274141) (xy 197.687717 93.098243) (xy 197.71665 92.915577) (xy 197.71665 92.730622) + (xy 197.687717 92.547956) (xy 197.630565 92.372058) (xy 197.621333 92.353938) (xy 197.619327 92.350001) + (xy 201.175 92.350001) (xy 201.175 92.605816) (xy 201.185406 92.70767) (xy 201.240095 92.872712) + (xy 201.331368 93.020688) (xy 201.454311 93.143631) (xy 201.602287 93.234904) (xy 201.767329 93.289593) + (xy 201.869184 93.3) (xy 201.912499 93.3) (xy 201.9125 93.299999) (xy 201.9125 92.350001) (xy 202.4125 92.350001) + (xy 202.4125 93.299999) (xy 202.412501 93.3) (xy 202.455816 93.3) (xy 202.55767 93.289593) (xy 202.722712 93.234904) + (xy 202.870688 93.143631) (xy 202.993631 93.020688) (xy 203.084904 92.872712) (xy 203.139593 92.70767) + (xy 203.15 92.605816) (xy 203.15 92.350001) (xy 203.149999 92.35) (xy 202.412501 92.35) (xy 202.4125 92.350001) + (xy 201.9125 92.350001) (xy 201.912499 92.35) (xy 201.175001 92.35) (xy 201.175 92.350001) (xy 197.619327 92.350001) + (xy 197.546603 92.207272) (xy 197.546598 92.207264) (xy 197.531634 92.186668) (xy 196.94165 92.776652) + (xy 196.94165 92.770439) (xy 196.914391 92.668706) (xy 196.86173 92.577494) (xy 196.787256 92.50302) + (xy 196.696044 92.450359) (xy 196.594311 92.4231) (xy 196.588094 92.4231) (xy 197.17808 91.833114) + (xy 197.157485 91.818151) (xy 197.157477 91.818146) (xy 196.992693 91.734185) (xy 196.965643 91.725396) + (xy 196.951427 91.715067) (xy 196.934945 91.708987) (xy 196.92729 91.697531) (xy 196.916143 91.689432) + (xy 196.910713 91.67272) (xy 196.900953 91.658113) (xy 196.901493 91.644345) (xy 196.897236 91.631241) + (xy 196.902665 91.614531) (xy 196.903355 91.596975) (xy 196.905556 91.594183) (xy 201.175 91.594183) + (xy 201.175 91.849999) (xy 201.175001 91.85) (xy 201.912499 91.85) (xy 201.9125 91.849999) (xy 201.9125 90.900001) + (xy 202.4125 90.900001) (xy 202.4125 91.849999) (xy 202.412501 91.85) (xy 203.149999 91.85) (xy 203.15 91.849999) + (xy 203.15 91.612721) (xy 203.3995 91.612721) (xy 203.3995 92.587278) (xy 203.407781 92.639562) + (xy 203.413234 92.673994) (xy 203.414122 92.679597) (xy 203.414123 92.679601) (xy 203.455377 92.760565) + (xy 203.47082 92.790873) (xy 203.559127 92.87918) (xy 203.559129 92.879181) (xy 203.559128 92.879181) + (xy 203.659455 92.9303) (xy 203.670402 92.935878) (xy 203.732985 92.945789) (xy 203.762721 92.9505) + (xy 203.762724 92.9505) (xy 204.312279 92.9505) (xy 204.339131 92.946246) (xy 204.404598 92.935878) + (xy 204.515873 92.87918) (xy 204.60418 92.790873) (xy 204.660878 92.679598) (xy 204.6755 92.587276) + (xy 204.6755 91.612724) (xy 204.674167 91.604309) (xy 204.667733 91.563685) (xy 204.660878 91.520402) + (xy 204.653713 91.506341) (xy 204.604181 91.409129) (xy 204.60418 91.409127) (xy 204.515873 91.32082) + (xy 204.51587 91.320818) (xy 204.515871 91.320818) (xy 204.404601 91.264123) (xy 204.404598 91.264122) + (xy 204.37151 91.258881) (xy 204.316995 91.231102) (xy 204.289218 91.176584) (xy 204.288 91.1611) + (xy 204.288 90.512671) (xy 204.249864 90.420603) (xy 204.179496 90.350234) (xy 204.151719 90.295717) + (xy 204.1505 90.280231) (xy 204.1505 90.027609) (xy 204.169407 89.969418) (xy 204.17949 89.957611) + (xy 204.260489 89.876613) (xy 204.300835 89.806732) (xy 204.319797 89.77389) (xy 204.319797 89.773888) + (xy 204.319799 89.773886) (xy 204.3505 89.659309) (xy 204.3505 89.540691) (xy 204.319799 89.426114) + (xy 204.319797 89.426111) (xy 204.319797 89.426109) (xy 204.260492 89.323391) (xy 204.26049 89.323389) + (xy 204.260489 89.323387) (xy 204.176613 89.239511) (xy 204.17661 89.239509) (xy 204.176608 89.239507) + (xy 204.073889 89.180202) (xy 204.07389 89.180202) (xy 204.029232 89.168236) (xy 203.959309 89.1495) + (xy 203.840691 89.1495) (xy 203.799669 89.160492) (xy 203.726109 89.180202) (xy 203.623391 89.239507) + (xy 203.539507 89.323391) (xy 203.480202 89.426109) (xy 203.468287 89.470576) (xy 203.4495 89.540691) + (xy 203.4495 89.659309) (xy 203.462315 89.707134) (xy 203.480202 89.77389) (xy 203.539507 89.876608) + (xy 203.539509 89.87661) (xy 203.539511 89.876613) (xy 203.620505 89.957607) (xy 203.648281 90.012122) + (xy 203.6495 90.027609) (xy 203.6495 90.474828) (xy 203.687634 90.566894) (xy 203.687635 90.566895) + (xy 203.687636 90.566897) (xy 203.758005 90.637266) (xy 203.785781 90.691781) (xy 203.787 90.707268) + (xy 203.787 91.1611) (xy 203.768093 91.219291) (xy 203.718593 91.255255) (xy 203.70349 91.258881) + (xy 203.670401 91.264122) (xy 203.670398 91.264123) (xy 203.559129 91.320818) (xy 203.470818 91.409129) + (xy 203.414123 91.520398) (xy 203.414122 91.520402) (xy 203.3995 91.612721) (xy 203.15 91.612721) + (xy 203.15 91.594183) (xy 203.139593 91.492329) (xy 203.084904 91.327287) (xy 202.993631 91.179311) + (xy 202.870688 91.056368) (xy 202.722712 90.965095) (xy 202.55767 90.910406) (xy 202.455816 90.9) + (xy 202.412501 90.9) (xy 202.4125 90.900001) (xy 201.9125 90.900001) (xy 201.912499 90.9) (xy 201.869184 90.9) + (xy 201.767329 90.910406) (xy 201.602287 90.965095) (xy 201.454311 91.056368) (xy 201.331368 91.179311) + (xy 201.240095 91.327287) (xy 201.185406 91.492329) (xy 201.175 91.594183) (xy 196.905556 91.594183) + (xy 196.911885 91.586154) (xy 196.916143 91.57305) (xy 196.941232 91.548927) (xy 197.067875 91.464308) + (xy 197.182858 91.349325) (xy 197.273198 91.214121) (xy 197.335426 91.063889) (xy 197.36715 90.904405) + (xy 197.36715 90.741795) (xy 197.335426 90.582311) (xy 197.273198 90.432079) (xy 197.182858 90.296875) + (xy 197.067875 90.181892) (xy 197.0399 90.1632) (xy 196.932668 90.09155) (xy 196.78244 90.029324) + (xy 196.622955 89.9976) (xy 196.460345 89.9976) (xy 196.460344 89.9976) (xy 196.300859 90.029324) + (xy 196.150631 90.09155) (xy 196.015428 90.181889) (xy 195.900439 90.296878) (xy 195.810102 90.432079) + (xy 195.747874 90.582309) (xy 195.71615 90.741794) (xy 195.71615 90.904405) (xy 195.747874 91.06389) + (xy 195.8101 91.214118) (xy 195.885716 91.327287) (xy 195.900442 91.349325) (xy 196.015425 91.464308) + (xy 196.140064 91.547589) (xy 196.142064 91.548925) (xy 196.179944 91.596975) (xy 196.182346 91.658113) + (xy 196.148354 91.708987) (xy 196.117657 91.725395) (xy 196.09061 91.734183) (xy 195.925818 91.818148) + (xy 195.905218 91.833114) (xy 196.495204 92.4231) (xy 196.488989 92.4231) (xy 196.387256 92.450359) + (xy 196.296044 92.50302) (xy 196.22157 92.577494) (xy 196.168909 92.668706) (xy 196.14165 92.770439) + (xy 196.14165 92.776654) (xy 195.551664 92.186668) (xy 195.536698 92.207268) (xy 195.452734 92.372058) + (xy 195.395582 92.547956) (xy 195.36665 92.730622) (xy 175.36665 92.730622) (xy 175.337717 92.547956) + (xy 175.280565 92.372058) (xy 175.196603 92.207272) (xy 175.196598 92.207264) (xy 175.181634 92.186668) + (xy 174.59165 92.776652) (xy 174.59165 92.770439) (xy 174.564391 92.668706) (xy 174.51173 92.577494) + (xy 174.437256 92.50302) (xy 174.346044 92.450359) (xy 174.244311 92.4231) (xy 174.238094 92.4231) + (xy 174.82808 91.833114) (xy 174.807485 91.818151) (xy 174.807477 91.818146) (xy 174.642693 91.734185) + (xy 174.615643 91.725396) (xy 174.566143 91.689432) (xy 174.547236 91.631241) (xy 174.566143 91.57305) + (xy 174.591232 91.548927) (xy 174.717875 91.464308) (xy 174.832858 91.349325) (xy 174.923198 91.214121) + (xy 174.985426 91.063889) (xy 175.01715 90.904405) (xy 175.01715 90.741795) (xy 174.985426 90.582311) + (xy 174.923198 90.432079) (xy 174.832858 90.296875) (xy 174.717875 90.181892) (xy 174.6899 90.1632) + (xy 174.582668 90.09155) (xy 174.43244 90.029324) (xy 174.272955 89.9976) (xy 174.110345 89.9976) + (xy 174.110344 89.9976) (xy 173.950859 90.029324) (xy 173.800631 90.09155) (xy 173.665428 90.181889) + (xy 173.550439 90.296878) (xy 173.460102 90.432079) (xy 173.397874 90.582309) (xy 173.36615 90.741794) + (xy 173.36615 90.904405) (xy 173.397874 91.06389) (xy 173.4601 91.214118) (xy 173.535716 91.327287) + (xy 173.550442 91.349325) (xy 173.665425 91.464308) (xy 173.790064 91.547589) (xy 173.792064 91.548925) + (xy 173.829944 91.596975) (xy 173.832346 91.658113) (xy 173.798354 91.708987) (xy 173.767657 91.725395) + (xy 173.74061 91.734183) (xy 173.575818 91.818148) (xy 173.555218 91.833114) (xy 174.145204 92.4231) + (xy 174.138989 92.4231) (xy 174.037256 92.450359) (xy 173.946044 92.50302) (xy 173.87157 92.577494) + (xy 173.818909 92.668706) (xy 173.79165 92.770439) (xy 173.79165 92.776654) (xy 173.201664 92.186668) + (xy 173.186698 92.207268) (xy 173.102734 92.372058) (xy 173.045582 92.547956) (xy 173.01665 92.730622) + (xy 164.69215 92.730622) (xy 164.69215 91.990422) (xy 164.694052 91.971108) (xy 164.698151 91.9505) + (xy 164.7005 91.938691) (xy 164.7005 91.761308) (xy 164.665895 91.587334) (xy 164.598013 91.423453) + (xy 164.598011 91.423451) (xy 164.598009 91.423445) (xy 164.541479 91.338844) (xy 164.499464 91.275964) + (xy 164.374036 91.150536) (xy 164.310176 91.107866) (xy 164.226554 91.05199) (xy 164.226545 91.051986) + (xy 164.062664 90.984104) (xy 163.888694 90.9495) (xy 163.888692 90.9495) (xy 163.711309 90.9495) + (xy 163.711306 90.9495) (xy 163.537335 90.984104) (xy 163.373454 91.051986) (xy 163.225963 91.150537) + (xy 163.09219 91.284308) (xy 163.092185 91.284314) (xy 163.065936 91.3236) (xy 163.062745 91.328376) + (xy 162.993637 91.431803) (xy 162.975002 91.476793) (xy 162.972405 91.483061) (xy 162.972404 91.483064) + (xy 162.925756 91.59568) (xy 162.925754 91.595686) (xy 162.904661 91.701734) (xy 162.895131 91.749647) + (xy 162.892811 91.761309) (xy 162.89115 91.769657) (xy 162.89115 102.9736) (xy 162.872243 103.031791) + (xy 162.822743 103.067755) (xy 162.79215 103.0726) (xy 162.776822 103.0726) (xy 162.732929 103.081332) + (xy 162.732925 103.081334) (xy 162.683148 103.114594) (xy 162.683144 103.114598) (xy 162.649884 103.164375) + (xy 162.649882 103.164379) (xy 162.64115 103.208272) (xy 162.64115 106.4168) (xy 162.622243 106.474991) + (xy 162.572743 106.510955) (xy 162.54215 106.5158) (xy 155.76115 106.5158) (xy 155.702959 106.496893) + (xy 155.666995 106.447393) (xy 155.66215 106.4168) (xy 155.66215 95.904408) (xy 155.662149 95.904405) + (xy 155.661808 95.902693) (xy 155.627545 95.730434) (xy 155.586698 95.631822) (xy 155.585157 95.628102) + (xy 155.559664 95.566555) (xy 155.559664 95.566554) (xy 155.486599 95.457206) (xy 155.486598 95.457204) + (xy 155.461118 95.419069) (xy 155.461116 95.419067) (xy 155.461114 95.419064) (xy 153.342541 93.300491) + (xy 154.26495 93.300491) (xy 154.26495 93.419109) (xy 154.289837 93.511988) (xy 154.295652 93.53369) + (xy 154.354957 93.636408) (xy 154.354959 93.63641) (xy 154.354961 93.636413) (xy 154.438837 93.720289) + (xy 154.438839 93.72029) (xy 154.438841 93.720292) (xy 154.54156 93.779597) (xy 154.541561 93.779597) + (xy 154.541564 93.779599) (xy 154.656141 93.8103) (xy 154.656143 93.8103) (xy 154.774757 93.8103) + (xy 154.774759 93.8103) (xy 154.889336 93.779599) (xy 154.889338 93.779597) (xy 154.88934 93.779597) + (xy 154.992058 93.720292) (xy 154.992058 93.720291) (xy 154.992063 93.720289) (xy 155.075939 93.636413) + (xy 155.079403 93.630413) (xy 155.135247 93.53369) (xy 155.135247 93.533688) (xy 155.135249 93.533686) + (xy 155.16595 93.419109) (xy 155.16595 93.300491) (xy 155.135249 93.185914) (xy 155.135247 93.185911) + (xy 155.135247 93.185909) (xy 155.075942 93.083191) (xy 155.07594 93.083189) (xy 155.075939 93.083187) + (xy 154.992063 92.999311) (xy 154.99206 92.999309) (xy 154.992058 92.999307) (xy 154.889339 92.940002) + (xy 154.88934 92.940002) (xy 154.873941 92.935876) (xy 154.774759 92.9093) (xy 154.656141 92.9093) + (xy 154.586017 92.928089) (xy 154.541559 92.940002) (xy 154.438841 92.999307) (xy 154.354957 93.083191) + (xy 154.295652 93.185909) (xy 154.285687 93.2231) (xy 154.26495 93.300491) (xy 153.342541 93.300491) + (xy 143.825686 83.783636) (xy 143.819951 83.779804) (xy 143.753315 83.735279) (xy 143.753309 83.735276) + (xy 143.749071 83.732444) (xy 143.678197 83.685087) (xy 143.590109 83.6486) (xy 143.585847 83.646834) + (xy 143.585844 83.646833) (xy 143.514319 83.617206) (xy 143.514313 83.617204) (xy 143.340344 83.5826) + (xy 143.340342 83.5826) (xy 143.340341 83.5826) (xy 134.760342 83.5826) (xy 134.582958 83.5826) + (xy 134.582955 83.5826) (xy 134.408986 83.617204) (xy 134.40898 83.617206) (xy 134.308662 83.65876) + (xy 134.308658 83.658761) (xy 134.304858 83.660336) (xy 134.245103 83.685087) (xy 134.207681 83.710092) + (xy 134.203022 83.713204) (xy 134.20302 83.713206) (xy 134.097617 83.783633) (xy 129.548046 88.333204) + (xy 129.493529 88.360981) (xy 129.478042 88.3622) (xy 128.033866 88.3622) (xy 127.975675 88.343293) + (xy 127.939711 88.293793) (xy 127.939711 88.232607) (xy 127.975675 88.183107) (xy 127.995981 88.171736) + (xy 128.102403 88.127655) (xy 128.118197 88.121113) (xy 128.265685 88.022564) (xy 128.391114 87.897135) + (xy 128.489663 87.749647) (xy 128.557544 87.585766) (xy 128.59215 87.411791) (xy 128.59215 87.234409) + (xy 128.557544 87.060434) (xy 128.496918 86.914069) (xy 128.489664 86.896555) (xy 128.489664 86.896554) + (xy 128.391114 86.749065) (xy 128.265684 86.623635) (xy 128.118194 86.525085) (xy 127.954316 86.457206) + (xy 127.780343 86.4226) (xy 127.780341 86.4226) (xy 127.602959 86.4226) (xy 127.602956 86.4226) + (xy 127.428984 86.457206) (xy 127.428982 86.457206) (xy 127.265105 86.525085) (xy 127.265104 86.525085) + (xy 127.117615 86.623635) (xy 126.992185 86.749065) (xy 126.893635 86.896554) (xy 126.893635 86.896555) + (xy 126.825756 87.060432) (xy 126.825756 87.060434) (xy 126.79115 87.234406) (xy 126.79115 87.34493) + (xy 126.772243 87.403121) (xy 126.762154 87.414934) (xy 122.907723 91.269364) (xy 122.853206 91.297141) + (xy 122.828027 91.297884) (xy 122.82514 91.2976) (xy 122.82513 91.2976) (xy 122.65817 91.2976) (xy 122.658162 91.2976) + (xy 122.635562 91.302096) (xy 122.574801 91.294904) (xy 122.529872 91.25337) (xy 122.51725 91.204998) + (xy 122.51725 89.284215) (xy 122.536157 89.226024) (xy 122.56125 89.201899) (xy 122.584384 89.186442) + (xy 122.656319 89.138377) (xy 127.5725 84.222196) (xy 127.627017 84.194419) (xy 127.642504 84.1932) + (xy 131.383418 84.1932) (xy 131.383419 84.1932) (xy 131.509094 84.168201) (xy 131.627477 84.119165) + (xy 131.734019 84.047976) (xy 131.824626 83.957369) (xy 131.895815 83.850827) (xy 131.944851 83.732444) + (xy 131.96985 83.606769) (xy 131.96985 83.478631) (xy 131.944851 83.352956) (xy 131.895815 83.234573) + (xy 131.895813 83.23457) (xy 131.895811 83.234566) (xy 131.848385 83.163589) (xy 131.824626 83.128031) + (xy 131.734019 83.037424) (xy 131.658987 82.987289) (xy 131.627483 82.966238) (xy 131.627475 82.966234) + (xy 131.509097 82.9172) (xy 131.509095 82.917199) (xy 131.509094 82.917199) (xy 131.383419 82.8922) + (xy 127.267981 82.8922) (xy 127.26798 82.8922) (xy 127.206634 82.904403) (xy 127.142306 82.917199) + (xy 127.142305 82.917199) (xy 127.142302 82.9172) (xy 127.083291 82.941644) (xy 127.023923 82.966234) + (xy 126.917384 83.03742) (xy 121.73637 88.218434) (xy 121.665183 88.324975) (xy 121.616149 88.443354) + (xy 121.616149 88.443356) (xy 121.591151 88.569028) (xy 121.591151 88.697171) (xy 121.606312 88.773391) + (xy 121.608651 88.785151) (xy 121.616149 88.822843) (xy 121.616149 88.822845) (xy 121.665183 88.941224) + (xy 121.724169 89.029505) (xy 121.736373 89.047769) (xy 121.826981 89.138377) (xy 121.826984 89.138379) + (xy 121.826986 89.138381) (xy 121.92205 89.201899) (xy 121.95993 89.249948) (xy 121.96605 89.284215) + (xy 121.96605 91.204998) (xy 121.947143 91.263189) (xy 121.897643 91.299153) (xy 121.847738 91.302096) + (xy 121.825137 91.2976) (xy 121.82513 91.2976) (xy 121.65817 91.2976) (xy 121.658162 91.2976) (xy 121.610462 91.307088) + (xy 121.549701 91.299895) (xy 121.504772 91.258362) (xy 121.49215 91.20999) (xy 121.49215 90.553271) + (xy 121.454014 90.461203) (xy 121.383547 90.390735) (xy 121.383547 90.390736) (xy 121.33915 90.346339) + (xy 121.31769 90.31422) (xy 121.304014 90.281203) (xy 121.233547 90.210736) (xy 120.958893 89.936082) + (xy 120.683547 89.660736) (xy 120.683545 89.660735) (xy 120.683544 89.660734) (xy 120.591479 89.6226) + (xy 120.591478 89.6226) (xy 120.027133 89.6226) (xy 119.968942 89.603693) (xy 119.932978 89.554193) + (xy 119.931613 89.502049) (xy 119.931303 89.502009) (xy 119.931561 89.500047) (xy 119.931507 89.497975) + (xy 119.93215 89.495575) (xy 119.93215 89.350625) (xy 119.93016 89.343198) (xy 119.894634 89.210615) + (xy 119.894632 89.210612) (xy 119.894632 89.21061) (xy 119.822162 89.085089) (xy 119.82216 89.085087) + (xy 119.822159 89.085085) (xy 119.719665 88.982591) (xy 119.719662 88.982589) (xy 119.71966 88.982587) + (xy 119.594138 88.910117) (xy 119.594139 88.910117) (xy 119.530627 88.893099) (xy 119.454125 88.8726) + (xy 119.309175 88.8726) (xy 119.249105 88.888696) (xy 119.16916 88.910117) (xy 119.043639 88.982587) + (xy 118.941137 89.085089) (xy 118.868667 89.21061) (xy 118.838448 89.323387) (xy 118.83115 89.350625) + (xy 118.83115 89.495575) (xy 118.849229 89.563046) (xy 118.868667 89.635589) (xy 118.941137 89.76111) + (xy 118.941139 89.761112) (xy 118.941141 89.761115) (xy 119.043635 89.863609) (xy 119.043637 89.86361) + (xy 119.043639 89.863612) (xy 119.169161 89.936082) (xy 119.169162 89.936082) (xy 119.169165 89.936084) + (xy 119.249483 89.957605) (xy 119.254473 89.958942) (xy 119.298853 89.984565) (xy 119.399753 90.085464) + (xy 119.465366 90.112642) (xy 119.511892 90.152378) (xy 119.526176 90.211873) (xy 119.502762 90.268401) + (xy 119.482483 90.286421) (xy 119.407588 90.336465) (xy 119.392814 90.346336) (xy 119.122446 90.616704) + (xy 119.06793 90.644481) (xy 119.052443 90.6457) (xy 115.447658 90.6457) (xy 115.389467 90.626793) + (xy 115.377654 90.616704) (xy 114.948742 90.187792) (xy 114.920965 90.133275) (xy 114.930536 90.072843) + (xy 114.973801 90.029578) (xy 115.034233 90.020007) (xy 115.038061 90.020691) (xy 115.102948 90.033598) + (xy 115.102953 90.033598) (xy 115.102959 90.0336) (xy 115.10296 90.0336) (xy 115.28034 90.0336) + (xy 115.280341 90.0336) (xy 115.454316 89.998994) (xy 115.618197 89.931113) (xy 115.765685 89.832564) + (xy 115.891114 89.707135) (xy 115.933564 89.643604) (xy 115.94426 89.627597) (xy 115.99231 89.589718) + (xy 116.026575 89.583599) (xy 116.061511 89.583599) (xy 116.061514 89.583599) (xy 116.086641 89.580685) + (xy 116.189415 89.535306) (xy 116.268856 89.455865) (xy 116.314235 89.353091) (xy 116.31715 89.327965) + (xy 116.317149 88.938236) (xy 116.314235 88.913109) (xy 116.268856 88.810335) (xy 116.189415 88.730894) + (xy 116.151161 88.714003) (xy 116.105566 88.673202) (xy 116.09215 88.623439) (xy 116.09215 88.37276) + (xy 116.111057 88.314569) (xy 116.151161 88.282196) (xy 116.189415 88.265306) (xy 116.268856 88.185865) + (xy 116.314235 88.083091) (xy 116.31715 88.057965) (xy 116.317149 87.668236) (xy 116.314235 87.643109) + (xy 116.268856 87.540335) (xy 116.189415 87.460894) (xy 116.186844 87.459759) (xy 116.151161 87.444003) + (xy 116.105566 87.403202) (xy 116.09215 87.353439) (xy 116.09215 87.10276) (xy 116.111057 87.044569) + (xy 116.151161 87.012196) (xy 116.189415 86.995306) (xy 116.268856 86.915865) (xy 116.314235 86.813091) + (xy 116.31715 86.787965) (xy 116.317149 86.398236) (xy 116.314235 86.373109) (xy 116.268856 86.270335) + (xy 116.189415 86.190894) (xy 116.151161 86.174003) (xy 116.105566 86.133202) (xy 116.09215 86.083439) + (xy 116.09215 85.83276) (xy 116.111057 85.774569) (xy 116.151161 85.742196) (xy 116.189415 85.725306) + (xy 116.268856 85.645865) (xy 116.314235 85.543091) (xy 116.31715 85.517965) (xy 116.317149 85.128236) + (xy 116.314235 85.103109) (xy 116.268856 85.000335) (xy 116.189415 84.920894) (xy 116.086641 84.875515) + (xy 116.08664 84.875514) (xy 116.086638 84.875514) (xy 116.061519 84.8726) (xy 116.061515 84.8726) + (xy 116.026574 84.8726) (xy 116.009863 84.86717) (xy 115.992309 84.866481) (xy 115.981488 84.857951) + (xy 115.968383 84.853693) (xy 115.944259 84.828602) (xy 115.910916 84.7787) (xy 115.891114 84.749064) + (xy 114.063986 82.921936) (xy 114.063974 82.921928) (xy 113.978423 82.864765) (xy 113.974897 82.862409) + (xy 113.916497 82.823387) (xy 113.863132 82.801282) (xy 113.858322 82.798634) (xy 113.840961 82.780122) + (xy 113.821662 82.763638) (xy 113.82034 82.758133) (xy 113.816468 82.754004) (xy 113.813304 82.728823) + (xy 113.807379 82.704143) (xy 113.809545 82.698912) (xy 113.80884 82.693296) (xy 113.821082 82.671062) + (xy 113.830795 82.647616) (xy 113.835621 82.644658) (xy 113.838352 82.639699) (xy 113.861324 82.628907) + (xy 113.882964 82.615647) (xy 113.890588 82.614131) (xy 114.036061 82.591091) (xy 114.230677 82.527856) + (xy 114.412996 82.434961) (xy 114.578541 82.314685) (xy 114.723235 82.169991) (xy 114.843511 82.004446) + (xy 114.936406 81.822127) (xy 114.99964 81.627514) (xy 115.008259 81.5731) (xy 114.164662 81.5731) + (xy 114.197575 81.516093) (xy 114.23165 81.388926) (xy 114.23165 81.257274) (xy 114.224203 81.229481) + (xy 115.32115 81.229481) (xy 115.32115 81.416718) (xy 115.357676 81.600349) (xy 115.429327 81.773329) + (xy 115.429331 81.773338) (xy 115.485965 81.858095) (xy 115.533348 81.929008) (xy 115.665742 82.061402) + (xy 115.732113 82.105749) (xy 115.821411 82.165418) (xy 115.821417 82.16542) (xy 115.821419 82.165422) + (xy 115.994399 82.237073) (xy 116.178034 82.2736) (xy 116.178035 82.2736) (xy 116.365265 82.2736) + (xy 116.365266 82.2736) (xy 116.548901 82.237073) (xy 116.721881 82.165422) (xy 116.721884 82.165419) + (xy 116.721888 82.165418) (xy 116.767397 82.135009) (xy 116.877558 82.061402) (xy 117.009952 81.929008) + (xy 117.103486 81.789025) (xy 117.113968 81.773338) (xy 117.113969 81.773334) (xy 117.113972 81.773331) + (xy 117.185623 81.600351) (xy 117.22215 81.416716) (xy 117.22215 81.229484) (xy 117.222149 81.229481) + (xy 117.86115 81.229481) (xy 117.86115 81.416718) (xy 117.897676 81.600349) (xy 117.969327 81.773329) + (xy 117.969331 81.773338) (xy 118.025965 81.858095) (xy 118.073348 81.929008) (xy 118.205742 82.061402) + (xy 118.272113 82.105749) (xy 118.361411 82.165418) (xy 118.361417 82.16542) (xy 118.361419 82.165422) + (xy 118.534399 82.237073) (xy 118.718034 82.2736) (xy 118.718035 82.2736) (xy 118.905265 82.2736) + (xy 118.905266 82.2736) (xy 119.088901 82.237073) (xy 119.261881 82.165422) (xy 119.261884 82.165419) + (xy 119.261888 82.165418) (xy 119.307397 82.135009) (xy 119.417558 82.061402) (xy 119.549952 81.929008) + (xy 119.643486 81.789025) (xy 119.653968 81.773338) (xy 119.653969 81.773334) (xy 119.653972 81.773331) + (xy 119.725623 81.600351) (xy 119.76215 81.416716) (xy 119.76215 81.229484) (xy 119.762149 81.229481) + (xy 120.40115 81.229481) (xy 120.40115 81.416718) (xy 120.437676 81.600349) (xy 120.509327 81.773329) + (xy 120.509331 81.773338) (xy 120.565965 81.858095) (xy 120.613348 81.929008) (xy 120.745742 82.061402) + (xy 120.812113 82.105749) (xy 120.901411 82.165418) (xy 120.901417 82.16542) (xy 120.901419 82.165422) + (xy 121.074399 82.237073) (xy 121.258034 82.2736) (xy 121.258035 82.2736) (xy 121.445265 82.2736) + (xy 121.445266 82.2736) (xy 121.628901 82.237073) (xy 121.801881 82.165422) (xy 121.801884 82.165419) + (xy 121.801888 82.165418) (xy 121.847397 82.135009) (xy 121.957558 82.061402) (xy 122.089952 81.929008) + (xy 122.183486 81.789025) (xy 122.193968 81.773338) (xy 122.193969 81.773334) (xy 122.193972 81.773331) + (xy 122.265623 81.600351) (xy 122.30215 81.416716) (xy 122.30215 81.229484) (xy 122.302149 81.229481) + (xy 122.94115 81.229481) (xy 122.94115 81.416718) (xy 122.977676 81.600349) (xy 123.049327 81.773329) + (xy 123.049331 81.773338) (xy 123.105965 81.858095) (xy 123.153348 81.929008) (xy 123.285742 82.061402) + (xy 123.352113 82.105749) (xy 123.441411 82.165418) (xy 123.441417 82.16542) (xy 123.441419 82.165422) + (xy 123.614399 82.237073) (xy 123.798034 82.2736) (xy 123.798035 82.2736) (xy 123.985265 82.2736) + (xy 123.985266 82.2736) (xy 124.168901 82.237073) (xy 124.341881 82.165422) (xy 124.341884 82.165419) + (xy 124.341888 82.165418) (xy 124.387397 82.135009) (xy 124.497558 82.061402) (xy 124.629952 81.929008) + (xy 124.723486 81.789025) (xy 124.733968 81.773338) (xy 124.733969 81.773334) (xy 124.733972 81.773331) + (xy 124.805623 81.600351) (xy 124.84215 81.416716) (xy 124.84215 81.229484) (xy 124.842149 81.229481) + (xy 125.48115 81.229481) (xy 125.48115 81.416718) (xy 125.517676 81.600349) (xy 125.589327 81.773329) + (xy 125.589331 81.773338) (xy 125.645965 81.858095) (xy 125.693348 81.929008) (xy 125.825742 82.061402) + (xy 125.892113 82.105749) (xy 125.981411 82.165418) (xy 125.981417 82.16542) (xy 125.981419 82.165422) + (xy 126.154399 82.237073) (xy 126.338034 82.2736) (xy 126.338035 82.2736) (xy 126.525265 82.2736) + (xy 126.525266 82.2736) (xy 126.708901 82.237073) (xy 126.881881 82.165422) (xy 126.881884 82.165419) + (xy 126.881888 82.165418) (xy 126.927397 82.135009) (xy 127.037558 82.061402) (xy 127.169952 81.929008) + (xy 127.263486 81.789025) (xy 127.273968 81.773338) (xy 127.273969 81.773334) (xy 127.273972 81.773331) + (xy 127.345623 81.600351) (xy 127.38215 81.416716) (xy 127.38215 81.229484) (xy 127.382149 81.229481) + (xy 128.02115 81.229481) (xy 128.02115 81.416718) (xy 128.057676 81.600349) (xy 128.129327 81.773329) + (xy 128.129331 81.773338) (xy 128.185965 81.858095) (xy 128.233348 81.929008) (xy 128.365742 82.061402) + (xy 128.432113 82.105749) (xy 128.521411 82.165418) (xy 128.521417 82.16542) (xy 128.521419 82.165422) + (xy 128.694399 82.237073) (xy 128.878034 82.2736) (xy 128.878035 82.2736) (xy 129.065265 82.2736) + (xy 129.065266 82.2736) (xy 129.248901 82.237073) (xy 129.421881 82.165422) (xy 129.421884 82.165419) + (xy 129.421888 82.165418) (xy 129.467397 82.135009) (xy 129.577558 82.061402) (xy 129.709952 81.929008) + (xy 129.803486 81.789025) (xy 129.813968 81.773338) (xy 129.813969 81.773334) (xy 129.813972 81.773331) + (xy 129.885623 81.600351) (xy 129.92215 81.416716) (xy 129.92215 81.229484) (xy 129.922149 81.229481) + (xy 132.08115 81.229481) (xy 132.08115 81.416718) (xy 132.117676 81.600349) (xy 132.189327 81.773329) + (xy 132.189331 81.773338) (xy 132.245965 81.858095) (xy 132.293348 81.929008) (xy 132.425742 82.061402) + (xy 132.492113 82.105749) (xy 132.581411 82.165418) (xy 132.581417 82.16542) (xy 132.581419 82.165422) + (xy 132.754399 82.237073) (xy 132.938034 82.2736) (xy 132.938035 82.2736) (xy 133.125265 82.2736) + (xy 133.125266 82.2736) (xy 133.308901 82.237073) (xy 133.481881 82.165422) (xy 133.481884 82.165419) + (xy 133.481888 82.165418) (xy 133.527397 82.135009) (xy 133.637558 82.061402) (xy 133.769952 81.929008) + (xy 133.863486 81.789025) (xy 133.873968 81.773338) (xy 133.873969 81.773334) (xy 133.873972 81.773331) + (xy 133.945623 81.600351) (xy 133.98215 81.416716) (xy 133.98215 81.229484) (xy 133.982149 81.229481) + (xy 134.62115 81.229481) (xy 134.62115 81.416718) (xy 134.657676 81.600349) (xy 134.729327 81.773329) + (xy 134.729331 81.773338) (xy 134.785965 81.858095) (xy 134.833348 81.929008) (xy 134.965742 82.061402) + (xy 135.032113 82.105749) (xy 135.121411 82.165418) (xy 135.121417 82.16542) (xy 135.121419 82.165422) + (xy 135.294399 82.237073) (xy 135.478034 82.2736) (xy 135.478035 82.2736) (xy 135.665265 82.2736) + (xy 135.665266 82.2736) (xy 135.848901 82.237073) (xy 136.021881 82.165422) (xy 136.021884 82.165419) + (xy 136.021888 82.165418) (xy 136.067397 82.135009) (xy 136.177558 82.061402) (xy 136.309952 81.929008) + (xy 136.403486 81.789025) (xy 136.413968 81.773338) (xy 136.413969 81.773334) (xy 136.413972 81.773331) + (xy 136.485623 81.600351) (xy 136.52215 81.416716) (xy 136.52215 81.229484) (xy 136.522149 81.229481) + (xy 137.16115 81.229481) (xy 137.16115 81.416718) (xy 137.197676 81.600349) (xy 137.269327 81.773329) + (xy 137.269331 81.773338) (xy 137.325965 81.858095) (xy 137.373348 81.929008) (xy 137.505742 82.061402) + (xy 137.572113 82.105749) (xy 137.661411 82.165418) (xy 137.661417 82.16542) (xy 137.661419 82.165422) + (xy 137.834399 82.237073) (xy 138.018034 82.2736) (xy 138.018035 82.2736) (xy 138.205265 82.2736) + (xy 138.205266 82.2736) (xy 138.388901 82.237073) (xy 138.561881 82.165422) (xy 138.561884 82.165419) + (xy 138.561888 82.165418) (xy 138.607397 82.135009) (xy 138.717558 82.061402) (xy 138.849952 81.929008) + (xy 138.943486 81.789025) (xy 138.953968 81.773338) (xy 138.953969 81.773334) (xy 138.953972 81.773331) + (xy 139.025623 81.600351) (xy 139.06215 81.416716) (xy 139.06215 81.229484) (xy 139.062149 81.229481) + (xy 139.70115 81.229481) (xy 139.70115 81.416718) (xy 139.737676 81.600349) (xy 139.809327 81.773329) + (xy 139.809331 81.773338) (xy 139.865965 81.858095) (xy 139.913348 81.929008) (xy 140.045742 82.061402) + (xy 140.112113 82.105749) (xy 140.201411 82.165418) (xy 140.201417 82.16542) (xy 140.201419 82.165422) + (xy 140.374399 82.237073) (xy 140.558034 82.2736) (xy 140.558035 82.2736) (xy 140.745265 82.2736) + (xy 140.745266 82.2736) (xy 140.928901 82.237073) (xy 141.101881 82.165422) (xy 141.101884 82.165419) + (xy 141.101888 82.165418) (xy 141.147397 82.135009) (xy 141.257558 82.061402) (xy 141.389952 81.929008) + (xy 141.483486 81.789025) (xy 141.493968 81.773338) (xy 141.493969 81.773334) (xy 141.493972 81.773331) + (xy 141.565623 81.600351) (xy 141.60215 81.416716) (xy 141.60215 81.229484) (xy 141.602149 81.229481) + (xy 142.24115 81.229481) (xy 142.24115 81.416718) (xy 142.277676 81.600349) (xy 142.349327 81.773329) + (xy 142.349331 81.773338) (xy 142.405965 81.858095) (xy 142.453348 81.929008) (xy 142.585742 82.061402) + (xy 142.652113 82.105749) (xy 142.741411 82.165418) (xy 142.741417 82.16542) (xy 142.741419 82.165422) + (xy 142.914399 82.237073) (xy 143.098034 82.2736) (xy 143.098035 82.2736) (xy 143.285265 82.2736) + (xy 143.285266 82.2736) (xy 143.468901 82.237073) (xy 143.641881 82.165422) (xy 143.641884 82.165419) + (xy 143.641888 82.165418) (xy 143.687397 82.135009) (xy 143.797558 82.061402) (xy 143.929952 81.929008) + (xy 144.023486 81.789025) (xy 144.033968 81.773338) (xy 144.033969 81.773334) (xy 144.033972 81.773331) + (xy 144.105623 81.600351) (xy 144.14215 81.416716) (xy 144.14215 81.229484) (xy 144.142149 81.229481) + (xy 144.78115 81.229481) (xy 144.78115 81.416718) (xy 144.817676 81.600349) (xy 144.889327 81.773329) + (xy 144.889331 81.773338) (xy 144.945965 81.858095) (xy 144.993348 81.929008) (xy 145.125742 82.061402) + (xy 145.192113 82.105749) (xy 145.281411 82.165418) (xy 145.281417 82.16542) (xy 145.281419 82.165422) + (xy 145.454399 82.237073) (xy 145.638034 82.2736) (xy 145.638035 82.2736) (xy 145.825265 82.2736) + (xy 145.825266 82.2736) (xy 146.008901 82.237073) (xy 146.181881 82.165422) (xy 146.181884 82.165419) + (xy 146.181888 82.165418) (xy 146.227397 82.135009) (xy 146.337558 82.061402) (xy 146.469952 81.929008) + (xy 146.563486 81.789025) (xy 146.573968 81.773338) (xy 146.573969 81.773334) (xy 146.573972 81.773331) + (xy 146.645623 81.600351) (xy 146.68215 81.416716) (xy 146.68215 81.229484) (xy 146.682149 81.229481) + (xy 147.32115 81.229481) (xy 147.32115 81.416718) (xy 147.357676 81.600349) (xy 147.429327 81.773329) + (xy 147.429331 81.773338) (xy 147.485965 81.858095) (xy 147.533348 81.929008) (xy 147.665742 82.061402) + (xy 147.732113 82.105749) (xy 147.821411 82.165418) (xy 147.821417 82.16542) (xy 147.821419 82.165422) + (xy 147.994399 82.237073) (xy 148.178034 82.2736) (xy 148.178035 82.2736) (xy 148.365265 82.2736) + (xy 148.365266 82.2736) (xy 148.548901 82.237073) (xy 148.721881 82.165422) (xy 148.721884 82.165419) + (xy 148.721888 82.165418) (xy 148.767397 82.135009) (xy 148.877558 82.061402) (xy 149.009952 81.929008) + (xy 149.113972 81.773331) (xy 149.121018 81.756319) (xy 149.160753 81.709792) (xy 149.220247 81.695507) + (xy 149.276776 81.718919) (xy 149.282487 81.724198) (xy 152.408499 84.850209) (xy 155.523285 87.964995) + (xy 155.523286 87.964997) (xy 155.593753 88.035464) (xy 155.593754 88.035464) (xy 155.593755 88.035465) + (xy 155.685821 88.0736) (xy 155.685822 88.0736) (xy 173.53471 88.0736) (xy 173.592901 88.092507) + (xy 173.628865 88.142007) (xy 173.628865 88.203193) (xy 173.604715 88.242601) (xy 173.57635 88.270967) + (xy 173.550439 88.296878) (xy 173.4601 88.432081) (xy 173.397874 88.582309) (xy 173.36615 88.741794) + (xy 173.36615 88.904405) (xy 173.397874 89.06389) (xy 173.4601 89.214118) (xy 173.549957 89.3486) + (xy 173.550442 89.349325) (xy 173.665425 89.464308) (xy 173.800629 89.554648) (xy 173.80063 89.554648) + (xy 173.800631 89.554649) (xy 173.840596 89.571203) (xy 173.950861 89.616876) (xy 174.110345 89.6486) + (xy 174.110346 89.6486) (xy 174.272954 89.6486) (xy 174.272955 89.6486) (xy 174.432439 89.616876) + (xy 174.582671 89.554648) (xy 174.717875 89.464308) (xy 174.832858 89.349325) (xy 174.923198 89.214121) + (xy 174.985426 89.063889) (xy 174.999986 88.990691) (xy 190.4495 88.990691) (xy 190.4495 89.109309) + (xy 190.462687 89.158523) (xy 190.480202 89.22389) (xy 190.539507 89.326608) (xy 190.539509 89.32661) + (xy 190.539511 89.326613) (xy 190.623387 89.410489) (xy 190.623389 89.41049) (xy 190.623391 89.410492) + (xy 190.72611 89.469797) (xy 190.726111 89.469797) (xy 190.726114 89.469799) (xy 190.840691 89.5005) + (xy 190.840693 89.5005) (xy 190.959307 89.5005) (xy 190.959309 89.5005) (xy 191.073886 89.469799) + (xy 191.073888 89.469797) (xy 191.07389 89.469797) (xy 191.176608 89.410492) (xy 191.176608 89.410491) + (xy 191.176613 89.410489) (xy 191.260489 89.326613) (xy 191.289624 89.27615) (xy 191.319797 89.22389) + (xy 191.319797 89.223888) (xy 191.319799 89.223886) (xy 191.3505 89.109309) (xy 191.3505 88.990691) + (xy 191.319799 88.876114) (xy 191.319797 88.876111) (xy 191.319797 88.876109) (xy 191.260492 88.773391) + (xy 191.26049 88.773389) (xy 191.260489 88.773387) (xy 191.176613 88.689511) (xy 191.17661 88.689509) + (xy 191.176608 88.689507) (xy 191.073889 88.630202) (xy 191.07389 88.630202) (xy 191.04865 88.623439) + (xy 190.959309 88.5995) (xy 190.840691 88.5995) (xy 190.770567 88.618289) (xy 190.726109 88.630202) + (xy 190.623391 88.689507) (xy 190.539507 88.773391) (xy 190.480202 88.876109) (xy 190.465175 88.932191) + (xy 190.4495 88.990691) (xy 174.999986 88.990691) (xy 175.01715 88.904405) (xy 175.01715 88.741795) + (xy 174.985426 88.582311) (xy 174.927868 88.443354) (xy 174.923199 88.432081) (xy 174.909642 88.411792) + (xy 174.832858 88.296875) (xy 174.778584 88.242601) (xy 174.750809 88.188087) (xy 174.76038 88.127655) + (xy 174.803645 88.08439) (xy 174.84859 88.0736) (xy 195.88471 88.0736) (xy 195.942901 88.092507) + (xy 195.978865 88.142007) (xy 195.978865 88.203193) (xy 195.954715 88.242601) (xy 195.92635 88.270967) + (xy 195.900439 88.296878) (xy 195.8101 88.432081) (xy 195.747874 88.582309) (xy 195.71615 88.741794) + (xy 195.71615 88.904405) (xy 195.747874 89.06389) (xy 195.8101 89.214118) (xy 195.899957 89.3486) + (xy 195.900442 89.349325) (xy 196.015425 89.464308) (xy 196.150629 89.554648) (xy 196.15063 89.554648) + (xy 196.150631 89.554649) (xy 196.190596 89.571203) (xy 196.300861 89.616876) (xy 196.460345 89.6486) + (xy 196.460346 89.6486) (xy 196.622954 89.6486) (xy 196.622955 89.6486) (xy 196.782439 89.616876) + (xy 196.932671 89.554648) (xy 197.067875 89.464308) (xy 197.182858 89.349325) (xy 197.273198 89.214121) + (xy 197.304571 89.138381) (xy 197.30609 89.134714) (xy 197.345827 89.088188) (xy 197.397554 89.0736) + (xy 198.445491 89.0736) (xy 198.503682 89.092507) (xy 198.515488 89.10259) (xy 198.573387 89.160489) + (xy 198.573389 89.16049) (xy 198.573391 89.160492) (xy 198.67611 89.219797) (xy 198.676111 89.219797) + (xy 198.676114 89.219799) (xy 198.790691 89.2505) (xy 198.790693 89.2505) (xy 198.909307 89.2505) + (xy 198.909309 89.2505) (xy 199.023886 89.219799) (xy 199.023888 89.219797) (xy 199.02389 89.219797) + (xy 199.126608 89.160492) (xy 199.126608 89.160491) (xy 199.126613 89.160489) (xy 199.210489 89.076613) + (xy 199.25368 89.001805) (xy 199.269797 88.97389) (xy 199.269797 88.973888) (xy 199.269799 88.973886) + (xy 199.3005 88.859309) (xy 199.3005 88.740691) (xy 199.269799 88.626114) (xy 199.269797 88.626111) + (xy 199.269797 88.626109) (xy 199.210492 88.523391) (xy 199.21049 88.523389) (xy 199.210489 88.523387) + (xy 199.126613 88.439511) (xy 199.12661 88.439509) (xy 199.126608 88.439507) (xy 199.023889 88.380202) + (xy 199.02389 88.380202) (xy 198.996116 88.37276) (xy 198.909309 88.3495) (xy 198.790691 88.3495) + (xy 198.720567 88.368289) (xy 198.676109 88.380202) (xy 198.573391 88.439507) (xy 198.489505 88.523393) + (xy 198.485562 88.528533) (xy 198.484527 88.527739) (xy 198.4442 88.564044) (xy 198.40394 88.5726) + (xy 197.397554 88.5726) (xy 197.339363 88.553693) (xy 197.30609 88.511486) (xy 197.273198 88.432079) + (xy 197.194033 88.313599) (xy 197.182858 88.296875) (xy 197.128584 88.242601) (xy 197.100809 88.188087) + (xy 197.11038 88.127655) (xy 197.153645 88.08439) (xy 197.19859 88.0736) (xy 207.546881 88.0736) + (xy 207.605072 88.092507) (xy 207.616885 88.102596) (xy 208.898053 89.383764) (xy 208.898054 89.383764) + (xy 208.898055 89.383765) (xy 208.990121 89.4219) (xy 208.990122 89.4219) (xy 209.089778 89.4219) + (xy 209.313921 89.4219) (xy 209.372112 89.440807) (xy 209.408076 89.490307) (xy 209.408076 89.551493) + (xy 209.383925 89.590904) (xy 209.289514 89.685314) (xy 209.289511 89.685318) (xy 209.180017 89.849186) + (xy 209.104599 90.031263) (xy 209.104599 90.031265) (xy 209.06615 90.224556) (xy 209.06615 90.421643) + (xy 209.104599 90.614934) (xy 209.104599 90.614936) (xy 209.180017 90.797013) (xy 209.200016 90.826943) + (xy 209.289511 90.960882) (xy 209.428868 91.100239) (xy 209.592736 91.209732) (xy 209.774815 91.285151) + (xy 209.839384 91.297994) (xy 209.892767 91.327891) (xy 209.918383 91.383456) (xy 209.906446 91.443465) + (xy 209.861517 91.484998) (xy 209.835557 91.492873) (xy 209.750527 91.506341) (xy 209.548434 91.572004) + (xy 209.359097 91.668475) (xy 209.187185 91.793377) (xy 209.036927 91.943635) (xy 208.912025 92.115547) + (xy 208.815554 92.304884) (xy 208.749891 92.506977) (xy 208.739418 92.573099) (xy 208.739419 92.5731) + (xy 209.787504 92.5731) (xy 209.74902 92.639757) (xy 209.71665 92.760565) (xy 209.71665 92.885635) + (xy 209.74902 93.006443) (xy 209.787504 93.0731) (xy 208.739419 93.0731) (xy 208.749891 93.139222) + (xy 208.815554 93.341315) (xy 208.912025 93.530652) (xy 209.036927 93.702564) (xy 209.187185 93.852822) + (xy 209.359097 93.977724) (xy 209.548436 94.074196) (xy 209.718478 94.129445) (xy 209.767978 94.165409) + (xy 209.786886 94.223599) (xy 209.767979 94.28179) (xy 209.718479 94.317754) (xy 209.687886 94.3226) + (xy 209.435128 94.3226) (xy 209.435126 94.322601) (xy 209.34135 94.337452) (xy 209.341345 94.337454) + (xy 209.228309 94.395049) (xy 209.138599 94.484759) (xy 209.081004 94.597793) (xy 209.078926 94.604192) + (xy 209.042963 94.653692) (xy 208.984772 94.6726) (xy 179.67758 94.6726) (xy 179.551904 94.697599) + (xy 179.509741 94.715064) (xy 179.471856 94.7226) (xy 174.013878 94.7226) (xy 173.907349 94.743791) + (xy 173.907348 94.74379) (xy 173.888212 94.747597) (xy 173.888204 94.747599) (xy 173.769827 94.796632) + (xy 173.769816 94.796638) (xy 173.663282 94.867823) (xy 171.25487 97.276234) (xy 171.183683 97.382775) + (xy 171.134649 97.501154) (xy 171.134649 97.501156) (xy 171.109651 97.626828) (xy 171.109651 97.754971) + (xy 171.134649 97.880643) (xy 171.134649 97.880645) (xy 171.183683 97.999024) (xy 171.253089 98.1029) + (xy 171.254873 98.105569) (xy 171.345481 98.196177) (xy 171.452023 98.267365) (xy 171.452024 98.267365) + (xy 171.452025 98.267366) (xy 171.465866 98.273099) (xy 171.570406 98.316401) (xy 171.696081 98.341399) + (xy 171.696082 98.341399) (xy 171.824218 98.341399) (xy 171.824219 98.341399) (xy 171.949894 98.316401) + (xy 171.99378 98.298223) (xy 172.018571 98.287954) (xy 172.068277 98.267365) (xy 172.174819 98.196177) + (xy 172.847894 97.523101) (xy 178.466651 97.523101) (xy 178.466651 97.573086) (xy 178.477142 97.675787) (xy 178.477145 97.675799) (xy 178.532293 97.842224) (xy 178.62433 97.99144) (xy 178.748309 98.115419) (xy 178.897525 98.207456) (xy 179.063956 98.262606) (xy 179.166663 98.273099) (xy 179.441648 98.273099) (xy 179.44165 98.273098) (xy 179.44165 97.523101) (xy 179.94165 97.523101) (xy 179.94165 98.273098) @@ -43132,1443 +48599,1915 @@ (xy 180.485774 98.207456) (xy 180.63499 98.115419) (xy 180.758969 97.99144) (xy 180.851006 97.842224) (xy 180.906156 97.675793) (xy 180.91665 97.573087) (xy 180.91665 97.523101) (xy 180.916649 97.5231) (xy 179.941651 97.5231) (xy 179.94165 97.523101) (xy 179.44165 97.523101) (xy 179.441649 97.5231) - (xy 178.466652 97.5231) (xy 178.466651 97.523101) (xy 173.060027 97.523101) (xy 174.380532 96.202596) - (xy 174.435049 96.174819) (xy 174.450536 96.1736) (xy 178.81618 96.1736) (xy 178.874371 96.192507) - (xy 178.910335 96.242007) (xy 178.910335 96.303193) (xy 178.874371 96.352693) (xy 178.868152 96.356861) + (xy 178.466652 97.5231) (xy 178.466651 97.523101) (xy 172.847894 97.523101) (xy 173.397883 96.973112) + (xy 178.46665 96.973112) (xy 178.46665 97.023099) (xy 178.466651 97.0231) (xy 179.441649 97.0231) + (xy 179.44165 97.023099) (xy 179.44165 96.273101) (xy 179.94165 96.273101) (xy 179.94165 97.023099) + (xy 179.941651 97.0231) (xy 180.916648 97.0231) (xy 180.916649 97.023099) (xy 180.916649 96.973113) + (xy 180.906157 96.870412) (xy 180.906154 96.8704) (xy 180.851006 96.703975) (xy 180.758969 96.554759) + (xy 180.63499 96.43078) (xy 180.485774 96.338743) (xy 180.319343 96.283593) (xy 180.216637 96.2731) + (xy 179.941651 96.2731) (xy 179.94165 96.273101) (xy 179.44165 96.273101) (xy 179.441649 96.2731) + (xy 179.166663 96.2731) (xy 179.063962 96.283592) (xy 179.06395 96.283595) (xy 178.897525 96.338743) (xy 178.748309 96.43078) (xy 178.62433 96.554759) (xy 178.532293 96.703975) (xy 178.477143 96.870406) - (xy 178.46665 96.973112) (xy 178.46665 97.023099) (xy 178.466651 97.0231) (xy 180.916648 97.0231) - (xy 180.916649 97.023099) (xy 180.916649 96.973113) (xy 180.906157 96.870412) (xy 180.906154 96.8704) - (xy 180.851006 96.703975) (xy 180.758969 96.554759) (xy 180.63499 96.43078) (xy 180.485774 96.338743) - (xy 180.418875 96.316575) (xy 180.369585 96.280324) (xy 180.351017 96.222024) (xy 180.370262 96.163944) - (xy 180.419971 96.128269) (xy 180.450015 96.1236) (xy 208.886579 96.1236) (xy 208.94477 96.142507) - (xy 208.978676 96.18628) (xy 208.981131 96.192507) (xy 208.982289 96.195442) (xy 209.073728 96.316022) - (xy 209.194308 96.407461) (xy 209.194309 96.407461) (xy 209.19431 96.407462) (xy 209.262095 96.434193) - (xy 209.335086 96.462977) (xy 209.423548 96.4736) (xy 209.42355 96.4736) (xy 210.95975 96.4736) - (xy 210.959752 96.4736) (xy 211.048214 96.462977) (xy 211.188992 96.407461) (xy 211.309572 96.316022) - (xy 211.401011 96.195442) (xy 211.456527 96.054664) (xy 211.46715 95.966202) (xy 211.46715 94.679998) - (xy 211.456527 94.591536) (xy 211.416725 94.490605) (xy 211.401012 94.45076) (xy 211.401011 94.450759) - (xy 211.401011 94.450758) (xy 211.309572 94.330178) (xy 211.188992 94.238739) (xy 211.188991 94.238738) - (xy 211.188989 94.238737) (xy 211.048216 94.183223) (xy 211.025431 94.180487) (xy 210.96991 94.154775) - (xy 210.940105 94.10134) (xy 210.947401 94.040591) (xy 210.989011 93.995733) (xy 210.992292 93.993983) - (xy 211.024199 93.977725) (xy 211.0242 93.977725) (xy 211.196114 93.852822) (xy 211.346372 93.702564) - (xy 211.471274 93.530652) (xy 211.567745 93.341315) (xy 211.633408 93.139222) (xy 211.643881 93.0731) - (xy 210.595796 93.0731) (xy 210.63428 93.006443) (xy 210.66665 92.885635) (xy 210.66665 92.760565) - (xy 210.63428 92.639757) (xy 210.595796 92.5731) (xy 211.643881 92.5731) (xy 211.643881 92.573099) - (xy 211.633408 92.506977) (xy 211.567745 92.304884) (xy 211.471274 92.115547) (xy 211.346372 91.943635) - (xy 211.196114 91.793377) (xy 211.024202 91.668475) (xy 210.834859 91.572001) (xy 210.796476 91.55953) - (xy 210.746976 91.523566) (xy 210.728069 91.465376) (xy 210.746977 91.407185) (xy 210.782122 91.377166) - (xy 210.919644 91.307096) (xy 211.066151 91.200653) (xy 211.194203 91.072601) (xy 211.300646 90.926094) - (xy 211.382861 90.764739) (xy 211.438821 90.592509) (xy 211.457302 90.475827) (xy 211.46715 90.413649) - (xy 211.46715 90.23255) (xy 211.446119 90.09977) (xy 211.438821 90.053691) (xy 211.382861 89.881461) - (xy 211.300646 89.720106) (xy 211.194203 89.573599) (xy 211.066151 89.445547) (xy 210.919644 89.339104) - (xy 210.919643 89.339103) (xy 210.919641 89.339102) (xy 210.758289 89.256889) (xy 210.660557 89.225134) - (xy 210.611057 89.18917) (xy 210.594174 89.150896) (xy 210.59215 89.141041) (xy 210.59215 89.118673) - (xy 210.572473 89.045238) (xy 210.571886 89.042378) (xy 210.574981 89.014754) (xy 210.576437 88.986983) - (xy 210.578359 88.984608) (xy 210.5787 88.981574) (xy 210.597447 88.961037) (xy 210.614943 88.939433) - (xy 210.618888 88.937551) (xy 210.619952 88.936386) (xy 210.622373 88.935888) (xy 210.638267 88.928307) - (xy 210.758289 88.889311) (xy 210.919644 88.807096) (xy 211.066151 88.700653) (xy 211.194203 88.572601) - (xy 211.300646 88.426094) (xy 211.382861 88.264739) (xy 211.438821 88.092509) (xy 211.465572 87.923611) - (xy 211.46715 87.913649) (xy 211.46715 87.73255) (xy 211.438821 87.553693) (xy 211.438821 87.553691) - (xy 211.382861 87.381461) (xy 211.300646 87.220106) (xy 211.194203 87.073599) (xy 211.066151 86.945547) - (xy 210.919644 86.839104) (xy 210.919643 86.839103) (xy 210.919641 86.839102) (xy 210.758287 86.756888) - (xy 210.586056 86.700928) (xy 210.407199 86.6726) (xy 210.407196 86.6726) (xy 209.976104 86.6726) - (xy 209.976101 86.6726) (xy 209.797243 86.700928) (xy 209.625012 86.756888) (xy 209.463658 86.839102) - (xy 209.418144 86.87217) (xy 209.317149 86.945547) (xy 209.189097 87.073599) (xy 209.164363 87.107643) - (xy 209.082652 87.220108) (xy 209.000438 87.381462) (xy 208.944478 87.553693) (xy 208.91615 87.73255) - (xy 208.91615 87.913649) (xy 208.944478 88.092506) (xy 209.000438 88.264737) (xy 209.029105 88.320999) - (xy 209.038676 88.381431) (xy 209.010899 88.435947) (xy 208.956382 88.463725) (xy 208.89595 88.454154) - (xy 208.870891 88.435948) (xy 208.427694 87.992751) (xy 207.937563 87.50262) (xy 207.93756 87.502618) - (xy 207.937559 87.502617) (xy 207.937558 87.502616) (xy 207.846241 87.449894) (xy 207.846243 87.449894) - (xy 207.80672 87.439304) (xy 207.744377 87.4226) (xy 207.744375 87.4226) (xy 197.497367 87.4226) - (xy 197.439176 87.403693) (xy 197.403212 87.354193) (xy 197.403212 87.293007) (xy 197.405903 87.285715) - (xy 197.467676 87.13658) (xy 197.479662 87.107643) (xy 197.51715 86.919178) (xy 197.51715 86.727022) - (xy 197.479662 86.538557) (xy 197.406128 86.361029) (xy 197.406128 86.361028) (xy 197.29937 86.201255) - (xy 197.163494 86.065379) (xy 197.00372 85.958621) (xy 196.897355 85.914564) (xy 196.850829 85.874828) - (xy 196.836545 85.815333) (xy 196.85996 85.758805) (xy 196.897355 85.731636) (xy 196.934786 85.716131) - (xy 197.003723 85.687577) (xy 197.163495 85.58082) (xy 197.29937 85.444945) (xy 197.406127 85.285173) - (xy 197.479662 85.107643) (xy 197.51715 84.919178) (xy 197.51715 84.727022) (xy 197.479662 84.538557) - (xy 197.428958 84.416146) (xy 197.406128 84.361029) (xy 197.406128 84.361028) (xy 197.29937 84.201255) - (xy 197.163494 84.065379) (xy 197.00372 83.958621) (xy 196.897355 83.914564) (xy 196.850829 83.874828) - (xy 196.836545 83.815333) (xy 196.85996 83.758805) (xy 196.897355 83.731636) (xy 196.934786 83.716131) - (xy 197.003723 83.687577) (xy 197.163495 83.58082) (xy 197.29937 83.444945) (xy 197.406127 83.285173) - (xy 197.479662 83.107643) (xy 197.51715 82.919178) (xy 197.51715 82.727022) (xy 197.479662 82.538557) - (xy 197.432877 82.425607) (xy 197.406128 82.361029) (xy 197.406128 82.361028) (xy 197.29937 82.201255) - (xy 197.163494 82.065379) (xy 197.00372 81.958621) (xy 196.897355 81.914564) (xy 196.850829 81.874828) - (xy 196.836545 81.815333) (xy 196.85996 81.758805) (xy 196.897355 81.731636) (xy 196.952138 81.708944) - (xy 197.003723 81.687577) (xy 197.163495 81.58082) (xy 197.29937 81.444945) (xy 197.406127 81.285173) - (xy 197.479662 81.107643) (xy 197.51715 80.919178) (xy 197.51715 80.727022) (xy 197.479662 80.538557) - (xy 197.406128 80.361029) (xy 197.406128 80.361028) (xy 197.29937 80.201255) (xy 197.163494 80.065379) - (xy 197.00372 79.958621) (xy 196.897355 79.914564) (xy 196.850829 79.874828) (xy 196.836545 79.815333) - (xy 196.85996 79.758805) (xy 196.897355 79.731636) (xy 196.934786 79.716131) (xy 197.003723 79.687577) - (xy 197.163495 79.58082) (xy 197.29937 79.444945) (xy 197.406127 79.285173) (xy 197.479662 79.107643) - (xy 197.51715 78.919178) (xy 197.51715 78.727022) (xy 197.479662 78.538557) (xy 197.438555 78.439316) - (xy 197.406128 78.361029) (xy 197.406128 78.361028) (xy 197.29937 78.201255) (xy 197.163494 78.065379) - (xy 197.00372 77.958621) (xy 196.897355 77.914564) (xy 196.879729 77.89951) (xy 196.859959 77.887395) - (xy 196.856902 77.880014) (xy 196.850829 77.874828) (xy 196.845417 77.852286) (xy 196.836545 77.830867) - (xy 196.838409 77.8231) (xy 196.836545 77.815333) (xy 196.845416 77.793915) (xy 196.850829 77.771372) - (xy 196.856903 77.766184) (xy 196.85996 77.758805) (xy 196.897355 77.731636) (xy 196.968795 77.702045) - (xy 196.990821 77.69292) (xy 197.003723 77.687577) (xy 197.163495 77.58082) (xy 197.29937 77.444945) - (xy 197.380785 77.323099) (xy 208.689418 77.323099) (xy 208.689419 77.3231) (xy 209.733638 77.3231) - (xy 209.700725 77.380107) (xy 209.66665 77.507274) (xy 209.66665 77.638926) (xy 209.700725 77.766093) - (xy 209.733638 77.8231) (xy 208.689419 77.8231) (xy 208.699891 77.889222) (xy 208.765554 78.091315) - (xy 208.862025 78.280652) (xy 208.986927 78.452564) (xy 209.137185 78.602822) (xy 209.309098 78.727724) - (xy 209.341008 78.743983) (xy 209.384273 78.787248) (xy 209.393844 78.84768) (xy 209.366067 78.902197) - (xy 209.31155 78.929974) (xy 209.307869 78.930487) (xy 209.285083 78.933223) (xy 209.14431 78.988737) - (xy 209.144306 78.98874) (xy 209.023731 79.080175) (xy 209.023725 79.080181) (xy 208.93229 79.200756) - (xy 208.932287 79.20076) (xy 208.876773 79.341534) (xy 208.86615 79.429993) (xy 208.86615 80.716206) - (xy 208.876773 80.804665) (xy 208.932287 80.945439) (xy 208.932288 80.945441) (xy 208.932289 80.945442) - (xy 209.023728 81.066022) (xy 209.144308 81.157461) (xy 209.144309 81.157461) (xy 209.14431 81.157462) - (xy 209.214697 81.185219) (xy 209.285086 81.212977) (xy 209.373548 81.2236) (xy 209.37355 81.2236) - (xy 210.95975 81.2236) (xy 210.959752 81.2236) (xy 211.048214 81.212977) (xy 211.188992 81.157461) - (xy 211.309572 81.066022) (xy 211.401011 80.945442) (xy 211.456527 80.804664) (xy 211.46715 80.716202) - (xy 211.46715 79.429998) (xy 211.456527 79.341536) (xy 211.401011 79.200758) (xy 211.309572 79.080178) - (xy 211.188992 78.988739) (xy 211.188991 78.988738) (xy 211.188989 78.988737) (xy 211.048216 78.933223) - (xy 211.025431 78.930487) (xy 210.96991 78.904775) (xy 210.940105 78.85134) (xy 210.947401 78.790591) - (xy 210.989011 78.745733) (xy 210.992292 78.743983) (xy 211.024199 78.727725) (xy 211.0242 78.727725) - (xy 211.196114 78.602822) (xy 211.346372 78.452564) (xy 211.471274 78.280652) (xy 211.567745 78.091315) - (xy 211.633408 77.889222) (xy 211.643881 77.8231) (xy 210.599662 77.8231) (xy 210.632575 77.766093) - (xy 210.66665 77.638926) (xy 210.66665 77.507274) (xy 210.632575 77.380107) (xy 210.599662 77.3231) - (xy 211.643881 77.3231) (xy 211.643881 77.323099) (xy 211.633408 77.256977) (xy 211.567745 77.054884) - (xy 211.471274 76.865547) (xy 211.346372 76.693635) (xy 211.196114 76.543377) (xy 211.024202 76.418475) - (xy 210.834865 76.322004) (xy 210.632771 76.25634) (xy 210.4229 76.2231) (xy 210.416651 76.2231) - (xy 210.41665 76.223101) (xy 210.41665 77.140088) (xy 210.359643 77.107175) (xy 210.232476 77.0731) - (xy 210.100824 77.0731) (xy 209.973657 77.107175) (xy 209.91665 77.140088) (xy 209.91665 76.223101) - (xy 209.916649 76.2231) (xy 209.9104 76.2231) (xy 209.700528 76.25634) (xy 209.498434 76.322004) - (xy 209.309097 76.418475) (xy 209.137185 76.543377) (xy 208.986927 76.693635) (xy 208.862025 76.865547) - (xy 208.765554 77.054884) (xy 208.699891 77.256977) (xy 208.689418 77.323099) (xy 197.380785 77.323099) - (xy 197.406127 77.285173) (xy 197.479662 77.107643) (xy 197.51715 76.919178) (xy 197.51715 76.727022) - (xy 197.479662 76.538557) (xy 197.406128 76.361029) (xy 197.406128 76.361028) (xy 197.29937 76.201255) - (xy 197.163494 76.065379) (xy 197.035587 75.979914) (xy 196.997708 75.931864) (xy 196.995306 75.870726) - (xy 197.029299 75.819852) (xy 197.086703 75.798675) (xy 197.090582 75.798599) (xy 197.261514 75.798599) - (xy 197.286641 75.795685) (xy 197.389415 75.750306) (xy 197.468856 75.670865) (xy 197.514235 75.568091) - (xy 197.51715 75.542965) (xy 197.517149 74.335499) (xy 197.536056 74.277309) (xy 197.585556 74.241345) - (xy 197.616149 74.2365) (xy 198.657591 74.2365) (xy 198.657592 74.2365) (xy 198.812247 74.205737) - (xy 198.957929 74.145394) (xy 199.089039 74.057789) (xy 202.966835 70.179993) (xy 208.86615 70.179993) - (xy 208.86615 71.466206) (xy 208.876773 71.554665) (xy 208.932287 71.695439) (xy 208.932288 71.695441) - (xy 208.932289 71.695442) (xy 209.023728 71.816022) (xy 209.144308 71.907461) (xy 209.144309 71.907461) - (xy 209.14431 71.907462) (xy 209.212458 71.934336) (xy 209.285086 71.962977) (xy 209.373548 71.9736) - (xy 209.37355 71.9736) (xy 210.95975 71.9736) (xy 210.959752 71.9736) (xy 211.048214 71.962977) - (xy 211.188992 71.907461) (xy 211.309572 71.816022) (xy 211.401011 71.695442) (xy 211.456527 71.554664) - (xy 211.46715 71.466202) (xy 211.46715 70.179998) (xy 211.456527 70.091536) (xy 211.401011 69.950758) - (xy 211.309572 69.830178) (xy 211.188992 69.738739) (xy 211.188991 69.738738) (xy 211.188989 69.738737) - (xy 211.048215 69.683223) (xy 210.959756 69.6726) (xy 210.959752 69.6726) (xy 209.373548 69.6726) - (xy 209.373543 69.6726) (xy 209.285084 69.683223) (xy 209.14431 69.738737) (xy 209.144306 69.73874) - (xy 209.023731 69.830175) (xy 209.023725 69.830181) (xy 208.93229 69.950756) (xy 208.932287 69.95076) - (xy 208.876773 70.091534) (xy 208.86615 70.179993) (xy 202.966835 70.179993) (xy 204.914278 68.23255) - (xy 208.86615 68.23255) (xy 208.86615 68.413649) (xy 208.894478 68.592506) (xy 208.950438 68.764737) - (xy 208.984666 68.831914) (xy 209.032654 68.926094) (xy 209.139097 69.072601) (xy 209.267149 69.200653) - (xy 209.413656 69.307096) (xy 209.575011 69.389311) (xy 209.747241 69.445271) (xy 209.802411 69.454009) - (xy 209.926101 69.4736) (xy 209.926104 69.4736) (xy 210.407199 69.4736) (xy 210.496627 69.459435) - (xy 210.586059 69.445271) (xy 210.758289 69.389311) (xy 210.919644 69.307096) (xy 211.066151 69.200653) - (xy 211.194203 69.072601) (xy 211.300646 68.926094) (xy 211.382861 68.764739) (xy 211.438821 68.592509) - (xy 211.46715 68.413646) (xy 211.46715 68.232554) (xy 211.46715 68.23255) (xy 211.438821 68.053693) - (xy 211.438821 68.053691) (xy 211.382861 67.881461) (xy 211.300646 67.720106) (xy 211.194203 67.573599) - (xy 211.066151 67.445547) (xy 210.919644 67.339104) (xy 210.919643 67.339103) (xy 210.919641 67.339102) - (xy 210.758287 67.256888) (xy 210.586056 67.200928) (xy 210.407199 67.1726) (xy 210.407196 67.1726) - (xy 209.926104 67.1726) (xy 209.926101 67.1726) (xy 209.747243 67.200928) (xy 209.575012 67.256888) - (xy 209.413658 67.339102) (xy 209.340402 67.392325) (xy 209.267149 67.445547) (xy 209.139097 67.573599) - (xy 209.104046 67.621843) (xy 209.032652 67.720108) (xy 208.950438 67.881462) (xy 208.894478 68.053693) - (xy 208.86615 68.23255) (xy 204.914278 68.23255) (xy 210.144232 63.002596) (xy 210.198749 62.974819) - (xy 210.214236 62.9736) (xy 210.95975 62.9736) (xy 210.959752 62.9736) (xy 211.048214 62.962977) - (xy 211.188992 62.907461) (xy 211.309572 62.816022) (xy 211.401011 62.695442) (xy 211.456527 62.554664) - (xy 211.46715 62.466202) (xy 211.46715 61.179998) (xy 211.456527 61.091536) (xy 211.414804 60.985734) - (xy 211.401012 60.95076) (xy 211.401011 60.950759) (xy 211.401011 60.950758) (xy 211.309572 60.830178) - (xy 211.188992 60.738739) (xy 211.188991 60.738738) (xy 211.188989 60.738737) (xy 211.048215 60.683223) - (xy 210.959756 60.6726) (xy 210.959752 60.6726) (xy 209.423548 60.6726) (xy 209.423543 60.6726) - (xy 209.335084 60.683223) (xy 209.19431 60.738737) (xy 209.194306 60.73874) (xy 209.073731 60.830175) - (xy 209.073725 60.830181) (xy 208.98229 60.950756) (xy 208.982287 60.95076) (xy 208.926773 61.091534) - (xy 208.91615 61.179993) (xy 208.91615 61.925514) (xy 208.897243 61.983705) (xy 208.887154 61.995518) - (xy 198.276168 72.606504) (xy 198.221651 72.634281) (xy 198.206164 72.6355) (xy 177.879351 72.6355) - (xy 177.82116 72.616593) (xy 177.785196 72.567093) (xy 177.785196 72.505907) (xy 177.809347 72.466496) - (xy 178.600956 71.674886) (xy 179.41026 70.865581) (xy 179.410263 70.86558) (xy 179.48483 70.791013) - (xy 179.537557 70.699687) (xy 179.564851 70.597827) (xy 179.564851 70.492373) (xy 179.564851 70.486311) - (xy 179.56485 70.486293) (xy 179.56485 69.243072) (xy 179.55811 69.217919) (xy 179.5581 69.217884) - (xy 179.55353 69.200827) (xy 179.537557 69.141212) (xy 179.537555 69.141209) (xy 179.537555 69.141207) - (xy 179.484833 69.049891) (xy 179.484829 69.049886) (xy 179.171145 68.736201) (xy 179.143368 68.681685) - (xy 179.142149 68.666198) (xy 179.142149 68.250233) (xy 179.142149 68.250228) (xy 179.135741 68.190617) - (xy 179.132311 68.18142) (xy 179.085447 68.05577) (xy 178.999199 67.940558) (xy 178.999198 67.940557) - (xy 178.999196 67.940554) (xy 178.952513 67.905607) (xy 178.883979 67.854302) (xy 178.749138 67.80401) - (xy 178.749133 67.804009) (xy 178.749131 67.804008) (xy 178.749127 67.804008) (xy 178.717899 67.80065) - (xy 178.689523 67.7976) (xy 178.68952 67.7976) (xy 178.043783 67.7976) (xy 178.043779 67.7976) (xy 178.043778 67.797601) - (xy 178.035616 67.798478) (xy 177.98417 67.804008) (xy 177.984167 67.804008) (xy 177.984167 67.804009) - (xy 177.923884 67.826493) (xy 177.900746 67.835123) (xy 177.839616 67.837742) (xy 177.788622 67.80393) - (xy 177.767241 67.746602) (xy 177.76715 67.742364) (xy 177.76715 65.923244) (xy 187.98365 65.923244) - (xy 187.98365 66.127955) (xy 188.015671 66.330129) (xy 188.07893 66.524819) (xy 188.171862 66.707209) - (xy 188.171864 66.707213) (xy 188.292179 66.872813) (xy 188.292181 66.872815) (xy 188.292184 66.872819) - (xy 188.436931 67.017566) (xy 188.436934 67.017568) (xy 188.436936 67.01757) (xy 188.602536 67.137885) - (xy 188.60254 67.137887) (xy 188.784931 67.23082) (xy 188.979616 67.294077) (xy 188.979617 67.294077) - (xy 188.97962 67.294078) (xy 189.181795 67.3261) (xy 189.181798 67.3261) (xy 189.386505 67.3261) - (xy 189.588679 67.294078) (xy 189.58868 67.294077) (xy 189.588684 67.294077) (xy 189.783369 67.23082) - (xy 189.96576 67.137887) (xy 190.131369 67.017566) (xy 190.276116 66.872819) (xy 190.396437 66.70721) - (xy 190.48937 66.524819) (xy 190.552627 66.330134) (xy 190.568363 66.230782) (xy 190.58465 66.127955) - (xy 190.58465 65.923244) (xy 193.06365 65.923244) (xy 193.06365 66.127955) (xy 193.095671 66.330129) - (xy 193.15893 66.524819) (xy 193.251862 66.707209) (xy 193.251864 66.707213) (xy 193.372179 66.872813) - (xy 193.372181 66.872815) (xy 193.372184 66.872819) (xy 193.516931 67.017566) (xy 193.516934 67.017568) - (xy 193.516936 67.01757) (xy 193.682536 67.137885) (xy 193.68254 67.137887) (xy 193.864931 67.23082) - (xy 194.059616 67.294077) (xy 194.059617 67.294077) (xy 194.05962 67.294078) (xy 194.261795 67.3261) - (xy 194.261798 67.3261) (xy 194.466505 67.3261) (xy 194.668679 67.294078) (xy 194.66868 67.294077) - (xy 194.668684 67.294077) (xy 194.863369 67.23082) (xy 195.04576 67.137887) (xy 195.211369 67.017566) - (xy 195.356116 66.872819) (xy 195.476437 66.70721) (xy 195.56937 66.524819) (xy 195.632627 66.330134) - (xy 195.648363 66.230782) (xy 195.66465 66.127955) (xy 195.66465 65.923244) (xy 195.632628 65.72107) - (xy 195.618164 65.676555) (xy 195.56937 65.526381) (xy 195.476437 65.34399) (xy 195.476435 65.343986) - (xy 195.35612 65.178386) (xy 195.356118 65.178384) (xy 195.356116 65.178381) (xy 195.211369 65.033634) - (xy 195.211365 65.033631) (xy 195.211363 65.033629) (xy 195.045763 64.913314) (xy 195.045759 64.913312) - (xy 194.863369 64.82038) (xy 194.668679 64.757121) (xy 194.466505 64.7251) (xy 194.466502 64.7251) - (xy 194.261798 64.7251) (xy 194.261795 64.7251) (xy 194.05962 64.757121) (xy 193.86493 64.82038) - (xy 193.68254 64.913312) (xy 193.682536 64.913314) (xy 193.516936 65.033629) (xy 193.372179 65.178386) - (xy 193.251864 65.343986) (xy 193.251862 65.34399) (xy 193.15893 65.52638) (xy 193.095671 65.72107) - (xy 193.06365 65.923244) (xy 190.58465 65.923244) (xy 190.552628 65.72107) (xy 190.538164 65.676555) - (xy 190.48937 65.526381) (xy 190.396437 65.34399) (xy 190.396435 65.343986) (xy 190.27612 65.178386) - (xy 190.276118 65.178384) (xy 190.276116 65.178381) (xy 190.131369 65.033634) (xy 190.131365 65.033631) - (xy 190.131363 65.033629) (xy 189.965763 64.913314) (xy 189.965759 64.913312) (xy 189.783369 64.82038) - (xy 189.588679 64.757121) (xy 189.386505 64.7251) (xy 189.386502 64.7251) (xy 189.181798 64.7251) - (xy 189.181795 64.7251) (xy 188.97962 64.757121) (xy 188.78493 64.82038) (xy 188.60254 64.913312) - (xy 188.602536 64.913314) (xy 188.436936 65.033629) (xy 188.292179 65.178386) (xy 188.171864 65.343986) - (xy 188.171862 65.34399) (xy 188.07893 65.52638) (xy 188.015671 65.72107) (xy 187.98365 65.923244) - (xy 177.76715 65.923244) (xy 177.76715 65.622766) (xy 177.786057 65.564575) (xy 177.806821 65.543513) - (xy 177.84031 65.518443) (xy 177.924196 65.455646) (xy 177.99919 65.355466) (xy 178.049197 65.320214) - (xy 178.110376 65.321088) (xy 178.159357 65.357755) (xy 178.172957 65.385336) (xy 178.173628 65.38749) - (xy 178.173632 65.3875) (xy 178.261574 65.532972) (xy 178.381777 65.653175) (xy 178.527249 65.741117) - (xy 178.527257 65.74112) (xy 178.689539 65.791689) (xy 178.689545 65.791691) (xy 178.760075 65.798098) - (xy 178.76665 65.798098) (xy 178.76665 65.073101) (xy 179.26665 65.073101) (xy 179.26665 65.798098) - (xy 179.266651 65.798099) (xy 179.273216 65.798099) (xy 179.273232 65.798098) (xy 179.343753 65.791691) - (xy 179.343759 65.791689) (xy 179.506042 65.74112) (xy 179.50605 65.741117) (xy 179.651522 65.653175) - (xy 179.771725 65.532972) (xy 179.859667 65.3875) (xy 179.85967 65.387492) (xy 179.910239 65.22521) - (xy 179.910241 65.225204) (xy 179.916649 65.154681) (xy 179.91665 65.154668) (xy 179.91665 65.073101) - (xy 179.916649 65.0731) (xy 179.266651 65.0731) (xy 179.26665 65.073101) (xy 178.76665 65.073101) - (xy 178.76665 64.9221) (xy 178.785557 64.863909) (xy 178.835057 64.827945) (xy 178.86565 64.8231) - (xy 179.016649 64.8231) (xy 179.01665 64.823099) (xy 179.01665 64.6721) (xy 179.035557 64.613909) - (xy 179.085057 64.577945) (xy 179.11565 64.5731) (xy 179.916648 64.5731) (xy 179.916649 64.573099) - (xy 179.916649 64.5231) (xy 181.019354 64.5231) (xy 181.019549 64.525586) (xy 181.019551 64.525593) - (xy 181.065369 64.6833) (xy 181.065369 64.683301) (xy 181.148964 64.824652) (xy 181.265097 64.940785) - (xy 181.406449 65.02438) (xy 181.56416 65.0702) (xy 181.601013 65.0731) (xy 182.004149 65.0731) - (xy 182.00415 65.073099) (xy 182.00415 64.523101) (xy 182.50415 64.523101) (xy 182.50415 65.073099) - (xy 182.504151 65.0731) (xy 182.907287 65.0731) (xy 182.944139 65.0702) (xy 183.10185 65.02438) - (xy 183.101851 65.02438) (xy 183.243202 64.940785) (xy 183.359335 64.824652) (xy 183.44293 64.683301) - (xy 183.44293 64.6833) (xy 183.488748 64.525593) (xy 183.48875 64.525586) (xy 183.488946 64.5231) - (xy 182.504151 64.5231) (xy 182.50415 64.523101) (xy 182.00415 64.523101) (xy 182.004149 64.5231) - (xy 181.019354 64.5231) (xy 179.916649 64.5231) (xy 179.916649 64.491532) (xy 179.916648 64.491519) - (xy 179.910241 64.420996) (xy 179.910239 64.42099) (xy 179.85967 64.258707) (xy 179.859667 64.258699) - (xy 179.771726 64.113228) (xy 179.681598 64.0231) (xy 181.019354 64.0231) (xy 182.004149 64.0231) - (xy 182.00415 64.023099) (xy 182.00415 63.473101) (xy 182.004149 63.4731) (xy 181.601013 63.4731) - (xy 181.56416 63.475999) (xy 181.406449 63.521819) (xy 181.406448 63.521819) (xy 181.265097 63.605414) - (xy 181.148964 63.721547) (xy 181.065369 63.862898) (xy 181.065369 63.862899) (xy 181.019551 64.020606) - (xy 181.019549 64.020613) (xy 181.019354 64.0231) (xy 179.681598 64.0231) (xy 179.651522 63.993024) - (xy 179.50605 63.905082) (xy 179.506042 63.905079) (xy 179.34376 63.85451) (xy 179.343754 63.854508) - (xy 179.273231 63.8481) (xy 179.147049 63.8481) (xy 179.088858 63.829193) (xy 179.052894 63.779693) - (xy 179.052894 63.718507) (xy 179.077045 63.679097) (xy 179.733543 63.0226) (xy 179.953548 62.802596) - (xy 180.008064 62.774819) (xy 180.023551 62.7736) (xy 181.241642 62.7736) (xy 181.299833 62.792507) - (xy 181.321297 62.813811) (xy 181.3445 62.84525) (xy 181.453766 62.925892) (xy 181.453767 62.925892) - (xy 181.453768 62.925893) (xy 181.581951 62.970746) (xy 181.612375 62.973599) (xy 181.612377 62.9736) - (xy 181.612384 62.9736) (xy 182.895923 62.9736) (xy 182.895923 62.973599) (xy 182.926349 62.970746) - (xy 182.970271 62.955376) (xy 183.031437 62.954003) (xy 183.081733 62.988846) (xy 183.101942 63.046598) - (xy 183.096413 63.081514) (xy 183.094005 63.088396) (xy 183.094003 63.088405) (xy 183.09115 63.118825) - (xy 183.09115 63.386854) (xy 183.072243 63.445045) (xy 183.022743 63.481009) (xy 182.964533 63.481924) - (xy 182.944139 63.475999) (xy 182.907287 63.4731) (xy 182.504151 63.4731) (xy 182.50415 63.473101) - (xy 182.50415 64.023099) (xy 182.504151 64.0231) (xy 183.488946 64.0231) (xy 183.492075 64.019715) - (xy 183.503803 63.970871) (xy 183.550329 63.931135) (xy 183.588213 63.9236) (xy 184.770923 63.9236) - (xy 184.770923 63.923599) (xy 184.801349 63.920746) (xy 184.929532 63.875893) (xy 185.0388 63.79525) - (xy 185.119443 63.685982) (xy 185.164296 63.557799) (xy 185.167149 63.527373) (xy 185.16715 63.527373) - (xy 185.16715 63.4459) (xy 185.186057 63.387709) (xy 185.235557 63.351745) (xy 185.26615 63.3469) - (xy 187.500106 63.3469) (xy 187.558297 63.365807) (xy 187.570109 63.375896) (xy 187.621113 63.426899) - (xy 187.621134 63.42692) (xy 187.758066 63.505977) (xy 187.910793 63.5469) (xy 187.910795 63.5469) - (xy 188.068905 63.5469) (xy 188.068907 63.5469) (xy 188.221634 63.505977) (xy 188.358566 63.42692) - (xy 188.47037 63.315116) (xy 188.549427 63.178184) (xy 188.59035 63.025457) (xy 188.59035 62.867343) - (xy 188.549427 62.714616) (xy 188.47037 62.577684) (xy 188.358566 62.46588) (xy 188.221634 62.386823) - (xy 188.068907 62.3459) (xy 187.910793 62.3459) (xy 187.758066 62.386823) (xy 187.724513 62.406195) - (xy 187.621131 62.465882) (xy 187.570109 62.516904) (xy 187.515592 62.544681) (xy 187.500106 62.5459) - (xy 184.558577 62.5459) (xy 184.453123 62.5459) (xy 184.399754 62.5602) (xy 184.351257 62.573194) - (xy 184.259941 62.625916) (xy 184.259936 62.62592) (xy 184.192252 62.693604) (xy 184.137735 62.721381) - (xy 184.122249 62.7226) (xy 183.487375 62.7226) (xy 183.456955 62.725453) (xy 183.456951 62.725454) - (xy 183.413029 62.740823) (xy 183.351859 62.742195) (xy 183.301565 62.707351) (xy 183.281357 62.649599) - (xy 183.286888 62.614679) (xy 183.289296 62.607799) (xy 183.292149 62.577373) (xy 183.29215 62.577373) - (xy 183.29215 62.168827) (xy 183.292149 62.168825) (xy 183.291136 62.158022) (xy 183.289296 62.138401) - (xy 183.244443 62.010218) (xy 183.240365 62.004693) (xy 183.163804 61.900955) (xy 183.163802 61.900953) - (xy 183.1638 61.90095) (xy 183.163796 61.900947) (xy 183.163794 61.900945) (xy 183.054533 61.820307) - (xy 182.926353 61.775455) (xy 182.926344 61.775453) (xy 182.895924 61.7726) (xy 182.895916 61.7726) - (xy 181.612384 61.7726) (xy 181.612375 61.7726) (xy 181.581955 61.775453) (xy 181.581946 61.775455) - (xy 181.453766 61.820307) (xy 181.3445 61.900949) (xy 181.321298 61.932388) (xy 181.27153 61.967981) - (xy 181.241642 61.9726) (xy 179.869377 61.9726) (xy 179.763923 61.9726) (xy 179.722478 61.983705) - (xy 179.662057 61.999894) (xy 179.570741 62.052616) (xy 179.57074 62.052617) (xy 177.604751 64.018604) - (xy 177.550234 64.046381) (xy 177.534747 64.0476) (xy 177.118783 64.0476) (xy 177.118779 64.0476) - (xy 177.118778 64.047601) (xy 177.112266 64.048301) (xy 177.059169 64.054008) (xy 177.059164 64.054009) - (xy 176.92432 64.104302) (xy 176.809108 64.19055) (xy 176.8091 64.190558) (xy 176.722852 64.30577) - (xy 176.67256 64.440611) (xy 176.672558 64.440622) (xy 176.669066 64.473101) (xy 176.666698 64.495136) - (xy 176.66615 64.500229) (xy 176.66615 65.145966) (xy 176.666151 65.14597) (xy 176.672558 65.20558) - (xy 176.672559 65.205585) (xy 176.722852 65.340429) (xy 176.803008 65.447503) (xy 176.809104 65.455646) - (xy 176.809107 65.455648) (xy 176.809108 65.455649) (xy 176.926479 65.543513) (xy 176.961732 65.593521) - (xy 176.96615 65.622766) (xy 176.96615 69.095373) (xy 176.96615 69.200827) (xy 176.97747 69.243073) - (xy 176.993444 69.302692) (xy 177.046166 69.394008) (xy 177.046168 69.39401) (xy 177.04617 69.394013) - (xy 177.324758 69.6726) (xy 177.562154 69.909996) (xy 177.589931 69.964513) (xy 177.59115 69.98) - (xy 177.59115 70.395966) (xy 177.591151 70.39597) (xy 177.597558 70.45558) (xy 177.597559 70.455585) - (xy 177.647852 70.590429) (xy 177.715489 70.68078) (xy 177.734104 70.705646) (xy 177.734107 70.705648) - (xy 177.734108 70.705649) (xy 177.84932 70.791897) (xy 177.984161 70.842189) (xy 177.984162 70.842189) - (xy 177.984167 70.842191) (xy 178.043777 70.8486) (xy 178.055444 70.848599) (xy 178.113634 70.867502) - (xy 178.149601 70.917) (xy 178.149606 70.978185) (xy 178.125453 71.017603) (xy 177.154753 71.988304) - (xy 177.100236 72.016081) (xy 177.084749 72.0173) (xy 158.561551 72.0173) (xy 158.50336 71.998393) - (xy 158.467396 71.948893) (xy 158.467396 71.887707) (xy 158.491547 71.848296) (xy 162.266742 68.073101) - (xy 166.791651 68.073101) (xy 166.791651 68.873086) (xy 166.802142 68.975787) (xy 166.802145 68.975799) - (xy 166.857293 69.142224) (xy 166.94933 69.29144) (xy 167.073309 69.415419) (xy 167.222525 69.507456) - (xy 167.388956 69.562606) (xy 167.491662 69.573099) (xy 167.941648 69.573099) (xy 167.94165 69.573098) - (xy 167.94165 68.073101) (xy 168.44165 68.073101) (xy 168.44165 69.573098) (xy 168.441651 69.573099) - (xy 168.891636 69.573099) (xy 168.994337 69.562607) (xy 168.994349 69.562604) (xy 169.160774 69.507456) - (xy 169.30999 69.415419) (xy 169.433969 69.29144) (xy 169.526006 69.142224) (xy 169.581156 68.975793) - (xy 169.59165 68.873087) (xy 169.59165 68.073101) (xy 169.591649 68.0731) (xy 168.441651 68.0731) - (xy 168.44165 68.073101) (xy 167.94165 68.073101) (xy 167.941649 68.0731) (xy 166.791652 68.0731) - (xy 166.791651 68.073101) (xy 162.266742 68.073101) (xy 164.312847 66.026996) (xy 164.367364 65.999219) - (xy 164.382851 65.998) (xy 167.101621 65.998) (xy 167.159812 66.016907) (xy 167.195776 66.066407) - (xy 167.195776 66.127593) (xy 167.159812 66.177093) (xy 167.153594 66.181261) (xy 167.073307 66.230782) - (xy 166.94933 66.354759) (xy 166.857293 66.503975) (xy 166.802143 66.670406) (xy 166.79165 66.773112) - (xy 166.79165 67.573099) (xy 166.791651 67.5731) (xy 169.591648 67.5731) (xy 169.591649 67.573099) - (xy 169.591649 66.773113) (xy 169.581157 66.670412) (xy 169.581154 66.6704) (xy 169.526006 66.503975) - (xy 169.433969 66.354759) (xy 169.309992 66.230782) (xy 169.229706 66.181261) (xy 169.227187 66.178295) - (xy 169.223488 66.177093) (xy 169.207597 66.155221) (xy 169.190105 66.134619) (xy 169.189811 66.13074) - (xy 169.187524 66.127593) (xy 169.187524 66.100557) (xy 169.185482 66.073609) (xy 169.187524 66.070298) - (xy 169.187524 66.066407) (xy 169.203415 66.044533) (xy 169.217603 66.021533) (xy 169.2212 66.020054) - (xy 169.223488 66.016907) (xy 169.249198 66.008553) (xy 169.274199 65.998283) (xy 169.281679 65.998) - (xy 169.341206 65.998) (xy 169.399397 66.016907) (xy 169.411209 66.026996) (xy 169.450621 66.066407) - (xy 169.462234 66.07802) (xy 169.599166 66.157077) (xy 169.751893 66.198) (xy 169.751895 66.198) - (xy 169.910005 66.198) (xy 169.910007 66.198) (xy 170.062734 66.157077) (xy 170.199666 66.07802) - (xy 170.31147 65.966216) (xy 170.390527 65.829284) (xy 170.43145 65.676557) (xy 170.43145 65.518443) - (xy 170.390527 65.365716) (xy 170.31147 65.228784) (xy 170.199666 65.11698) (xy 170.062734 65.037923) - (xy 169.910007 64.997) (xy 169.751893 64.997) (xy 169.678681 65.016617) (xy 169.599164 65.037923) - (xy 169.520516 65.083331) (xy 169.460668 65.096052) (xy 169.404773 65.071165) (xy 169.37418 65.018177) - (xy 169.378919 64.961275) (xy 169.381527 64.954664) (xy 169.39215 64.866202) (xy 169.39215 62.779998) - (xy 169.381527 62.691536) (xy 169.381526 62.691534) (xy 169.381526 62.69153) (xy 169.379972 62.685382) - (xy 169.382435 62.684759) (xy 169.379338 62.634451) (xy 169.412192 62.582835) (xy 169.469111 62.560387) - (xy 169.475195 62.5602) (xy 171.008891 62.5602) (xy 171.008892 62.5602) (xy 171.163547 62.529437) - (xy 171.309229 62.469094) (xy 171.440339 62.381489) (xy 172.939484 60.882343) (xy 181.09295 60.882343) - (xy 181.09295 61.040457) (xy 181.133873 61.193184) (xy 181.21293 61.330116) (xy 181.324734 61.44192) - (xy 181.461666 61.520977) (xy 181.614393 61.5619) (xy 181.614395 61.5619) (xy 181.772505 61.5619) - (xy 181.772507 61.5619) (xy 181.925234 61.520977) (xy 182.062166 61.44192) (xy 182.17397 61.330116) - (xy 182.253027 61.193184) (xy 182.29395 61.040457) (xy 182.29395 60.882343) (xy 182.253027 60.729616) - (xy 182.17397 60.592684) (xy 182.062166 60.48088) (xy 181.925234 60.401823) (xy 181.772507 60.3609) - (xy 181.614393 60.3609) (xy 181.461666 60.401823) (xy 181.324734 60.48088) (xy 181.21293 60.592684) - (xy 181.133873 60.729616) (xy 181.09295 60.882343) (xy 172.939484 60.882343) (xy 173.591246 60.23058) - (xy 173.645763 60.202804) (xy 173.706195 60.212375) (xy 173.74946 60.25564) (xy 173.757626 60.289656) - (xy 173.759403 60.289423) (xy 173.760249 60.295854) (xy 173.769878 60.331791) (xy 173.801173 60.448584) - (xy 173.88023 60.585516) (xy 173.992034 60.69732) (xy 174.128966 60.776377) (xy 174.281693 60.8173) - (xy 174.281695 60.8173) (xy 174.439805 60.8173) (xy 174.439807 60.8173) (xy 174.592534 60.776377) - (xy 174.729466 60.69732) (xy 174.84127 60.585516) (xy 174.920327 60.448584) (xy 174.96125 60.295857) - (xy 174.96125 60.223698) (xy 174.963718 60.2161) (xy 174.962469 60.208211) (xy 174.972993 60.187555) - (xy 174.980157 60.165507) (xy 174.990236 60.153705) (xy 175.016347 60.127593) (xy 175.070862 60.099818) - (xy 175.086349 60.098599) (xy 175.264517 60.098599) (xy 175.264522 60.098599) (xy 175.324133 60.092191) - (xy 175.417153 60.057497) (xy 175.458979 60.041897) (xy 175.458979 60.041896) (xy 175.458981 60.041896) - (xy 175.574196 59.955646) (xy 175.660446 59.840431) (xy 175.68 59.788001) (xy 175.71805 59.740089) - (xy 175.772758 59.7236) (xy 176.610542 59.7236) (xy 176.668733 59.742507) (xy 176.703299 59.788001) - (xy 176.715314 59.820214) (xy 176.722854 59.840432) (xy 176.786979 59.926091) (xy 176.809104 59.955646) - (xy 176.809107 59.955648) (xy 176.809108 59.955649) (xy 176.92432 60.041897) (xy 177.059161 60.092189) - (xy 177.059162 60.092189) (xy 177.059167 60.092191) (xy 177.118777 60.0986) (xy 177.614522 60.098599) - (xy 177.674133 60.092191) (xy 177.767153 60.057497) (xy 177.808979 60.041897) (xy 177.808979 60.041896) - (xy 177.808981 60.041896) (xy 177.924196 59.955646) (xy 177.99919 59.855466) (xy 178.049197 59.820214) - (xy 178.110376 59.821088) (xy 178.159357 59.857755) (xy 178.172957 59.885336) (xy 178.173628 59.88749) - (xy 178.173632 59.8875) (xy 178.261574 60.032972) (xy 178.381777 60.153175) (xy 178.527249 60.241117) - (xy 178.527257 60.24112) (xy 178.689539 60.291689) (xy 178.689545 60.291691) (xy 178.760075 60.298098) - (xy 178.76665 60.298098) (xy 178.76665 59.573101) (xy 179.26665 59.573101) (xy 179.26665 60.298098) - (xy 179.266651 60.298099) (xy 179.273216 60.298099) (xy 179.273232 60.298098) (xy 179.343753 60.291691) - (xy 179.343759 60.291689) (xy 179.506042 60.24112) (xy 179.50605 60.241117) (xy 179.651522 60.153175) - (xy 179.771725 60.032972) (xy 179.859667 59.8875) (xy 179.85967 59.887492) (xy 179.910239 59.72521) - (xy 179.910241 59.725204) (xy 179.916649 59.654681) (xy 179.91665 59.654668) (xy 179.91665 59.573101) - (xy 179.916649 59.5731) (xy 179.266651 59.5731) (xy 179.26665 59.573101) (xy 178.76665 59.573101) - (xy 178.76665 59.4221) (xy 178.785557 59.363909) (xy 178.835057 59.327945) (xy 178.86565 59.3231) - (xy 179.016649 59.3231) (xy 179.01665 59.323099) (xy 179.01665 59.1721) (xy 179.035557 59.113909) - (xy 179.085057 59.077945) (xy 179.11565 59.0731) (xy 179.916648 59.0731) (xy 179.916649 59.073099) - (xy 179.916649 59.0165) (xy 179.935556 58.958309) (xy 179.985056 58.922345) (xy 180.015649 58.9175) - (xy 188.024724 58.9175) (xy 188.082915 58.936407) (xy 188.112932 58.971553) (xy 188.12419 58.993646) - (xy 188.171862 59.087209) (xy 188.171864 59.087213) (xy 188.292179 59.252813) (xy 188.292181 59.252815) - (xy 188.292184 59.252819) (xy 188.436931 59.397566) (xy 188.436934 59.397568) (xy 188.436936 59.39757) - (xy 188.602536 59.517885) (xy 188.60254 59.517887) (xy 188.784931 59.61082) (xy 188.979616 59.674077) - (xy 188.979619 59.674077) (xy 188.979621 59.674078) (xy 189.005693 59.678207) (xy 189.051666 59.685488) - (xy 189.106182 59.713264) (xy 189.106183 59.713264) (xy 193.595695 64.202777) (xy 193.679388 64.258699) - (xy 193.767748 64.31774) (xy 193.76775 64.317741) (xy 193.767752 64.317742) (xy 193.899034 64.37212) - (xy 193.95893 64.39693) (xy 193.984127 64.401942) (xy 194.161885 64.437301) (xy 194.161886 64.437301) - (xy 194.373696 64.437301) (xy 194.373716 64.4373) (xy 199.881414 64.4373) (xy 199.881415 64.4373) - (xy 200.08437 64.39693) (xy 200.275548 64.317741) (xy 200.308813 64.295514) (xy 200.447605 64.202777) - (xy 200.593927 64.056455) (xy 200.593928 64.056452) (xy 202.157627 62.492755) (xy 202.239392 62.370385) - (xy 202.272588 62.320705) (xy 202.272594 62.320693) (xy 202.317741 62.211697) (xy 202.35178 62.12952) - (xy 202.392151 61.926565) (xy 202.392151 61.719635) (xy 202.35178 61.51668) (xy 202.288501 61.363909) - (xy 202.272594 61.325506) (xy 202.272588 61.325494) (xy 202.190394 61.202484) (xy 202.157627 61.153445) - (xy 202.011305 61.007123) (xy 201.941104 60.960216) (xy 201.839255 60.892161) (xy 201.839243 60.892155) - (xy 201.64807 60.81297) (xy 201.445117 60.772599) (xy 201.445115 60.772599) (xy 201.238185 60.772599) - (xy 201.238182 60.772599) (xy 201.03523 60.81297) (xy 201.035228 60.81297) (xy 200.844056 60.892155) - (xy 200.844044 60.892161) (xy 200.671995 61.007123) (xy 200.671991 61.007126) (xy 199.371815 62.307304) - (xy 199.317298 62.335081) (xy 199.301811 62.3363) (xy 198.89115 62.3363) (xy 198.832959 62.317393) - (xy 198.796995 62.267893) (xy 198.79215 62.2373) (xy 198.79215 61.406957) (xy 198.792149 61.406951) - (xy 198.790484 61.393084) (xy 198.782009 61.32251) (xy 198.731009 61.193183) (xy 198.729015 61.188127) - (xy 198.729014 61.188126) (xy 198.729014 61.188125) (xy 198.641728 61.073022) (xy 198.526625 60.985736) - (xy 198.526624 60.985735) (xy 198.526622 60.985734) (xy 198.392241 60.932741) (xy 198.307798 60.9226) - (xy 198.307794 60.9226) (xy 197.775506 60.9226) (xy 197.775501 60.9226) (xy 197.69106 60.932741) - (xy 197.584094 60.974923) (xy 197.523025 60.978681) (xy 197.477772 60.952829) (xy 195.573106 59.048163) - (xy 195.545329 58.993646) (xy 195.554899 58.933218) (xy 195.56937 58.904819) (xy 195.632627 58.710134) - (xy 195.649389 58.604304) (xy 195.66465 58.507955) (xy 195.66465 58.303244) (xy 195.632628 58.10107) - (xy 195.632627 58.101066) (xy 195.56937 57.906381) (xy 195.476437 57.72399) (xy 195.476435 57.723986) - (xy 195.35612 57.558386) (xy 195.356118 57.558384) (xy 195.356116 57.558381) (xy 195.211369 57.413634) - (xy 195.211365 57.413631) (xy 195.211363 57.413629) (xy 195.045763 57.293314) (xy 195.045759 57.293312) - (xy 194.947188 57.243088) (xy 194.909351 57.223809) (xy 194.899162 57.21362) (xy 194.886157 57.207419) - (xy 194.87807 57.192528) (xy 194.866087 57.180545) (xy 194.863832 57.166311) (xy 194.856957 57.153651) - (xy 194.859166 57.136851) (xy 194.856516 57.120113) (xy 194.863057 57.107274) (xy 194.864937 57.092988) - (xy 194.876259 57.081364) (xy 194.884293 57.065597) (xy 194.90705 57.048602) (xy 194.9082 57.047977) - (xy 195.04576 56.977887) (xy 195.211369 56.857566) (xy 195.356116 56.712819) (xy 195.457628 56.573099) - (xy 208.739418 56.573099) (xy 208.739419 56.5731) (xy 209.787504 56.5731) (xy 209.74902 56.639757) - (xy 209.71665 56.760565) (xy 209.71665 56.885635) (xy 209.74902 57.006443) (xy 209.787504 57.0731) - (xy 208.739419 57.0731) (xy 208.749891 57.139222) (xy 208.815554 57.341315) (xy 208.912025 57.530652) - (xy 209.036927 57.702564) (xy 209.187185 57.852822) (xy 209.359097 57.977724) (xy 209.548436 58.074196) - (xy 209.586822 58.086668) (xy 209.636322 58.122631) (xy 209.65523 58.180822) (xy 209.636323 58.239013) - (xy 209.601176 58.269032) (xy 209.463661 58.3391) (xy 209.463659 58.339101) (xy 209.375751 58.402969) - (xy 209.317149 58.445547) (xy 209.189097 58.573599) (xy 209.16679 58.604302) (xy 209.082652 58.720108) - (xy 209.000438 58.881462) (xy 208.944478 59.053693) (xy 208.91615 59.23255) (xy 208.91615 59.413649) - (xy 208.944478 59.592506) (xy 209.000438 59.764737) (xy 209.076483 59.913984) (xy 209.082654 59.926094) - (xy 209.189097 60.072601) (xy 209.317149 60.200653) (xy 209.463656 60.307096) (xy 209.625011 60.389311) - (xy 209.797241 60.445271) (xy 209.857146 60.454759) (xy 209.976101 60.4736) (xy 209.976104 60.4736) - (xy 210.407199 60.4736) (xy 210.496627 60.459435) (xy 210.586059 60.445271) (xy 210.758289 60.389311) - (xy 210.919644 60.307096) (xy 211.066151 60.200653) (xy 211.194203 60.072601) (xy 211.300646 59.926094) - (xy 211.382861 59.764739) (xy 211.438821 59.592509) (xy 211.452985 59.503077) (xy 211.46715 59.413649) - (xy 211.46715 59.23255) (xy 211.438821 59.053693) (xy 211.438821 59.053691) (xy 211.382861 58.881461) - (xy 211.300646 58.720106) (xy 211.194203 58.573599) (xy 211.066151 58.445547) (xy 210.919644 58.339104) - (xy 210.91964 58.339101) (xy 210.919638 58.3391) (xy 210.782123 58.269032) (xy 210.738859 58.225768) - (xy 210.729288 58.165335) (xy 210.757066 58.110819) (xy 210.796478 58.086668) (xy 210.834862 58.074197) - (xy 211.024202 57.977724) (xy 211.196114 57.852822) (xy 211.346372 57.702564) (xy 211.471274 57.530652) - (xy 211.567745 57.341315) (xy 211.633408 57.139222) (xy 211.643881 57.0731) (xy 210.595796 57.0731) - (xy 210.63428 57.006443) (xy 210.66665 56.885635) (xy 210.66665 56.760565) (xy 210.63428 56.639757) - (xy 210.595796 56.5731) (xy 211.643881 56.5731) (xy 211.643881 56.573099) (xy 211.633408 56.506977) - (xy 211.567745 56.304884) (xy 211.471274 56.115547) (xy 211.346372 55.943635) (xy 211.196114 55.793377) - (xy 211.024202 55.668475) (xy 210.834859 55.572001) (xy 210.796476 55.55953) (xy 210.746976 55.523566) - (xy 210.728069 55.465376) (xy 210.746977 55.407185) (xy 210.782122 55.377166) (xy 210.919644 55.307096) - (xy 211.066151 55.200653) (xy 211.194203 55.072601) (xy 211.300646 54.926094) (xy 211.382861 54.764739) - (xy 211.438821 54.592509) (xy 211.457652 54.473617) (xy 211.46715 54.413649) (xy 211.46715 54.23255) - (xy 211.444509 54.089605) (xy 211.438821 54.053691) (xy 211.382861 53.881461) (xy 211.300646 53.720106) - (xy 211.194203 53.573599) (xy 211.066151 53.445547) (xy 210.919644 53.339104) (xy 210.919643 53.339103) - (xy 210.919641 53.339102) (xy 210.758287 53.256888) (xy 210.586056 53.200928) (xy 210.407199 53.1726) - (xy 210.407196 53.1726) (xy 209.976104 53.1726) (xy 209.976101 53.1726) (xy 209.797243 53.200928) - (xy 209.625012 53.256888) (xy 209.463658 53.339102) (xy 209.45815 53.343104) (xy 209.317149 53.445547) - (xy 209.189097 53.573599) (xy 209.156708 53.618179) (xy 209.082652 53.720108) (xy 209.000438 53.881462) - (xy 208.944478 54.053693) (xy 208.91615 54.23255) (xy 208.91615 54.413649) (xy 208.944478 54.592506) - (xy 209.000438 54.764737) (xy 209.076039 54.913113) (xy 209.082654 54.926094) (xy 209.189097 55.072601) - (xy 209.317149 55.200653) (xy 209.463656 55.307096) (xy 209.463658 55.307097) (xy 209.601175 55.377166) - (xy 209.64444 55.420431) (xy 209.654011 55.480863) (xy 209.626233 55.53538) (xy 209.586824 55.55953) - (xy 209.548438 55.572002) (xy 209.359097 55.668475) (xy 209.187185 55.793377) (xy 209.036927 55.943635) + (xy 178.46665 96.973112) (xy 173.397883 96.973112) (xy 174.318399 96.052595) (xy 174.372916 96.024819) + (xy 174.388403 96.0236) (xy 179.767242 96.0236) (xy 179.76725 96.023599) (xy 180.198171 96.023599) + (xy 180.198172 96.023598) (xy 180.239792 96.017007) (xy 180.29195 96.008747) (xy 180.291951 96.008747) + (xy 180.291952 96.008746) (xy 180.291954 96.008746) (xy 180.324021 95.992407) (xy 180.339756 95.98439) + (xy 180.3847 95.9736) (xy 208.984771 95.9736) (xy 209.042962 95.992507) (xy 209.078926 96.042007) + (xy 209.078926 96.042008) (xy 209.081004 96.048406) (xy 209.127624 96.139901) (xy 209.1386 96.161442) + (xy 209.228308 96.25115) (xy 209.341346 96.308746) (xy 209.435131 96.3236) (xy 210.948168 96.323599) + (xy 210.948171 96.323599) (xy 210.948172 96.323598) (xy 211.014266 96.313131) (xy 211.041949 96.308747) + (xy 211.041949 96.308746) (xy 211.041954 96.308746) (xy 211.154992 96.25115) (xy 211.2447 96.161442) + (xy 211.302296 96.048404) (xy 211.31715 95.954619) (xy 211.317149 94.691582) (xy 211.317149 94.691578) + (xy 211.317148 94.691576) (xy 211.302297 94.5978) (xy 211.302296 94.597798) (xy 211.302296 94.597796) + (xy 211.2447 94.484758) (xy 211.154992 94.39505) (xy 211.041954 94.337454) (xy 211.041955 94.337454) + (xy 210.948172 94.3226) (xy 210.695415 94.3226) (xy 210.637224 94.303693) (xy 210.60126 94.254193) + (xy 210.60126 94.193007) (xy 210.637224 94.143507) (xy 210.664823 94.129445) (xy 210.834863 94.074196) + (xy 211.024202 93.977724) (xy 211.196114 93.852822) (xy 211.346372 93.702564) (xy 211.471274 93.530652) + (xy 211.567745 93.341315) (xy 211.633408 93.139222) (xy 211.643881 93.0731) (xy 210.595796 93.0731) + (xy 210.63428 93.006443) (xy 210.66665 92.885635) (xy 210.66665 92.760565) (xy 210.63428 92.639757) + (xy 210.595796 92.5731) (xy 211.643881 92.5731) (xy 211.643881 92.573099) (xy 211.633408 92.506977) + (xy 211.567745 92.304884) (xy 211.471274 92.115547) (xy 211.346372 91.943635) (xy 211.196114 91.793377) + (xy 211.024202 91.668475) (xy 210.834865 91.572004) (xy 210.632772 91.506341) (xy 210.547742 91.492873) + (xy 210.493226 91.465095) (xy 210.465449 91.410578) (xy 210.475021 91.350146) (xy 210.518286 91.306882) + (xy 210.543913 91.297995) (xy 210.608485 91.285151) (xy 210.790564 91.209732) (xy 210.954432 91.100239) + (xy 211.093789 90.960882) (xy 211.203282 90.797014) (xy 211.278701 90.614935) (xy 211.31715 90.421641) + (xy 211.31715 90.224559) (xy 211.278701 90.031265) (xy 211.203282 89.849186) (xy 211.093789 89.685318) + (xy 210.954432 89.545961) (xy 210.83223 89.464308) (xy 210.790563 89.436467) (xy 210.608486 89.361049) + (xy 210.562954 89.351992) (xy 210.521834 89.343812) (xy 210.468452 89.313916) (xy 210.442836 89.258351) + (xy 210.44215 89.246715) (xy 210.44215 89.121571) (xy 210.404015 89.029505) (xy 210.404014 89.029504) + (xy 210.404014 89.029503) (xy 210.365092 88.990581) (xy 210.337317 88.936067) (xy 210.346888 88.875635) + (xy 210.390153 88.83237) (xy 210.415784 88.823482) (xy 210.608485 88.785151) (xy 210.790564 88.709732) + (xy 210.954432 88.600239) (xy 211.093789 88.460882) (xy 211.203282 88.297014) (xy 211.278701 88.114935) + (xy 211.31715 87.921641) (xy 211.31715 87.724559) (xy 211.278701 87.531265) (xy 211.203282 87.349186) + (xy 211.093789 87.185318) (xy 210.954432 87.045961) (xy 210.790564 86.936468) (xy 210.790565 86.936468) + (xy 210.790563 86.936467) (xy 210.608485 86.861049) (xy 210.415193 86.8226) (xy 210.415191 86.8226) + (xy 209.968109 86.8226) (xy 209.968106 86.8226) (xy 209.774815 86.861049) (xy 209.774813 86.861049) + (xy 209.592736 86.936467) (xy 209.428868 87.045961) (xy 209.428864 87.045964) (xy 209.289514 87.185314) + (xy 209.289511 87.185318) (xy 209.180017 87.349186) (xy 209.104599 87.531263) (xy 209.104599 87.531265) + (xy 209.06615 87.724556) (xy 209.06615 87.921643) (xy 209.074774 87.964995) (xy 209.104599 88.114935) + (xy 209.109868 88.127655) (xy 209.180017 88.297013) (xy 209.206316 88.336372) (xy 209.289511 88.460882) + (xy 209.428868 88.600239) (xy 209.562467 88.689507) (xy 209.592736 88.709732) (xy 209.64272 88.730436) + (xy 209.689246 88.770172) (xy 209.70353 88.829667) (xy 209.680116 88.886195) (xy 209.627947 88.918164) + (xy 209.604835 88.9209) (xy 209.184719 88.9209) (xy 209.126528 88.901993) (xy 209.114715 88.891904) + (xy 208.477004 88.254193) (xy 207.833547 87.610736) (xy 207.833545 87.610735) (xy 207.833544 87.610734) + (xy 207.741479 87.5726) (xy 207.741478 87.5726) (xy 197.19859 87.5726) (xy 197.140399 87.553693) + (xy 197.104435 87.504193) (xy 197.104435 87.443007) (xy 197.128584 87.403598) (xy 197.182858 87.349325) + (xy 197.273198 87.214121) (xy 197.335426 87.063889) (xy 197.36715 86.904405) (xy 197.36715 86.741795) + (xy 197.335426 86.582311) (xy 197.273198 86.432079) (xy 197.182858 86.296875) (xy 197.067875 86.181892) + (xy 197.056068 86.174003) (xy 196.941235 86.097274) (xy 196.903355 86.049224) (xy 196.900953 85.988086) + (xy 196.934946 85.937212) (xy 196.965646 85.920803) (xy 196.992688 85.912017) (xy 196.992689 85.912016) + (xy 197.157487 85.828047) (xy 197.17808 85.813084) (xy 196.588096 85.2231) (xy 196.594311 85.2231) + (xy 196.696044 85.195841) (xy 196.787256 85.14318) (xy 196.86173 85.068706) (xy 196.914391 84.977494) + (xy 196.94165 84.875761) (xy 196.94165 84.869546) (xy 197.531634 85.45953) (xy 197.546597 85.438937) + (xy 197.630565 85.274141) (xy 197.687717 85.098243) (xy 197.71665 84.915577) (xy 197.71665 84.730622) + (xy 197.687718 84.547958) (xy 197.644451 84.414795) (xy 197.644451 84.414794) (xy 197.636619 84.390691) + (xy 199.5995 84.390691) (xy 199.5995 84.509309) (xy 199.625089 84.604808) (xy 199.630202 84.62389) + (xy 199.689507 84.726608) (xy 199.689509 84.72661) (xy 199.689511 84.726613) (xy 199.773387 84.810489) + (xy 199.773389 84.81049) (xy 199.773391 84.810492) (xy 199.87611 84.869797) (xy 199.876111 84.869797) + (xy 199.876114 84.869799) (xy 199.990691 84.9005) (xy 199.990693 84.9005) (xy 200.109307 84.9005) + (xy 200.109309 84.9005) (xy 200.223886 84.869799) (xy 200.223888 84.869797) (xy 200.22389 84.869797) + (xy 200.326608 84.810492) (xy 200.326608 84.810491) (xy 200.326613 84.810489) (xy 200.407607 84.729494) + (xy 200.462122 84.701719) (xy 200.477609 84.7005) (xy 201.580463 84.7005) (xy 201.638654 84.719407) + (xy 201.674618 84.768907) (xy 201.678428 84.785225) (xy 201.684426 84.826392) (xy 201.720655 84.9005) + (xy 201.735802 84.931483) (xy 201.818517 85.014198) (xy 201.872285 85.040483) (xy 201.923604 85.065572) + (xy 201.923605 85.065572) (xy 201.923607 85.065573) (xy 201.99174 85.0755) (xy 201.991743 85.0755) + (xy 202.458257 85.0755) (xy 202.45826 85.0755) (xy 202.526393 85.065573) (xy 202.631483 85.014198) + (xy 202.714198 84.931483) (xy 202.765573 84.826393) (xy 202.7755 84.75826) (xy 202.7755 84.14174) + (xy 203.3245 84.14174) (xy 203.3245 84.75826) (xy 203.328429 84.785225) (xy 203.334427 84.826395) + (xy 203.378026 84.915577) (xy 203.385802 84.931483) (xy 203.468517 85.014198) (xy 203.563214 85.060492) + (xy 203.56898 85.063311) (xy 203.612954 85.105854) (xy 203.6245 85.152252) (xy 203.6245 85.647391) + (xy 203.605593 85.705582) (xy 203.595509 85.717388) (xy 203.544646 85.768252) (xy 203.539508 85.77339) + (xy 203.539507 85.773391) (xy 203.480202 85.876109) (xy 203.46546 85.931129) (xy 203.4495 85.990691) + (xy 203.4495 86.109309) (xy 203.471361 86.190894) (xy 203.480202 86.22389) (xy 203.539507 86.326608) + (xy 203.539509 86.32661) (xy 203.539511 86.326613) (xy 203.623387 86.410489) (xy 203.623389 86.41049) + (xy 203.623391 86.410492) (xy 203.72611 86.469797) (xy 203.726111 86.469797) (xy 203.726114 86.469799) + (xy 203.840691 86.5005) (xy 203.840693 86.5005) (xy 203.959307 86.5005) (xy 203.959309 86.5005) + (xy 204.073886 86.469799) (xy 204.073888 86.469797) (xy 204.07389 86.469797) (xy 204.176608 86.410492) + (xy 204.176608 86.410491) (xy 204.176613 86.410489) (xy 204.260489 86.326613) (xy 204.260492 86.326608) + (xy 204.319797 86.22389) (xy 204.319797 86.223888) (xy 204.319799 86.223886) (xy 204.3505 86.109309) + (xy 204.3505 85.990691) (xy 204.319799 85.876114) (xy 204.319797 85.876111) (xy 204.319797 85.876109) + (xy 204.260492 85.773391) (xy 204.260488 85.773386) (xy 204.176612 85.689509) (xy 204.174991 85.688573) + (xy 204.174094 85.687577) (xy 204.171468 85.685562) (xy 204.171841 85.685074) (xy 204.134055 85.643099) + (xy 204.1255 85.602842) (xy 204.1255 85.152252) (xy 204.144407 85.094061) (xy 204.18102 85.063311) + (xy 204.186786 85.060492) (xy 204.281483 85.014198) (xy 204.364198 84.931483) (xy 204.415573 84.826393) + (xy 204.4255 84.75826) (xy 204.4255 84.14174) (xy 204.415573 84.073607) (xy 204.41037 84.062965) + (xy 204.383464 84.007926) (xy 204.364198 83.968517) (xy 204.281483 83.885802) (xy 204.272861 83.881587) + (xy 204.176395 83.834427) (xy 204.149139 83.830456) (xy 204.10826 83.8245) (xy 203.64174 83.8245) + (xy 203.607673 83.829463) (xy 203.573604 83.834427) (xy 203.468518 83.885801) (xy 203.385801 83.968518) + (xy 203.334427 84.073604) (xy 203.331812 84.091552) (xy 203.3245 84.14174) (xy 202.7755 84.14174) + (xy 202.765573 84.073607) (xy 202.76037 84.062965) (xy 202.733464 84.007926) (xy 202.714198 83.968517) + (xy 202.631483 83.885802) (xy 202.622861 83.881587) (xy 202.526395 83.834427) (xy 202.499139 83.830456) + (xy 202.45826 83.8245) (xy 201.99174 83.8245) (xy 201.957673 83.829463) (xy 201.923604 83.834427) + (xy 201.818518 83.885801) (xy 201.735801 83.968518) (xy 201.684426 84.073607) (xy 201.678428 84.114775) + (xy 201.651328 84.169631) (xy 201.59716 84.198082) (xy 201.580463 84.1995) (xy 200.477609 84.1995) + (xy 200.419418 84.180593) (xy 200.407611 84.170509) (xy 200.326613 84.089511) (xy 200.32661 84.089509) + (xy 200.326608 84.089507) (xy 200.223889 84.030202) (xy 200.22389 84.030202) (xy 200.165651 84.014597) + (xy 200.109309 83.9995) (xy 199.990691 83.9995) (xy 199.934349 84.014597) (xy 199.876109 84.030202) + (xy 199.773391 84.089507) (xy 199.689507 84.173391) (xy 199.630202 84.276109) (xy 199.624638 84.296875) + (xy 199.5995 84.390691) (xy 197.636619 84.390691) (xy 197.630565 84.372058) (xy 197.546603 84.207272) + (xy 197.546598 84.207264) (xy 197.531634 84.186668) (xy 196.94165 84.776652) (xy 196.94165 84.770439) + (xy 196.914391 84.668706) (xy 196.86173 84.577494) (xy 196.787256 84.50302) (xy 196.696044 84.450359) + (xy 196.594311 84.4231) (xy 196.588094 84.4231) (xy 197.17808 83.833114) (xy 197.157485 83.818151) + (xy 197.157477 83.818146) (xy 196.992693 83.734185) (xy 196.965643 83.725396) (xy 196.916143 83.689432) + (xy 196.897236 83.631241) (xy 196.916143 83.57305) (xy 196.941232 83.548927) (xy 197.067875 83.464308) + (xy 197.182858 83.349325) (xy 197.273198 83.214121) (xy 197.335426 83.063889) (xy 197.36715 82.904405) + (xy 197.36715 82.741795) (xy 197.335426 82.582311) (xy 197.294203 82.48279) (xy 197.273199 82.432081) + (xy 197.271736 82.429892) (xy 197.182858 82.296875) (xy 197.067875 82.181892) (xy 197.067869 82.181888) + (xy 196.932668 82.09155) (xy 196.78244 82.029324) (xy 196.622955 81.9976) (xy 196.460345 81.9976) + (xy 196.460344 81.9976) (xy 196.300859 82.029324) (xy 196.150631 82.09155) (xy 196.015428 82.181889) + (xy 195.900439 82.296878) (xy 195.8101 82.432081) (xy 195.747874 82.582309) (xy 195.71615 82.741794) + (xy 195.71615 82.904405) (xy 195.747874 83.06389) (xy 195.8101 83.214118) (xy 195.831741 83.246507) + (xy 195.900442 83.349325) (xy 196.015425 83.464308) (xy 196.036862 83.478632) (xy 196.142064 83.548925) + (xy 196.179944 83.596975) (xy 196.182346 83.658113) (xy 196.148354 83.708987) (xy 196.117657 83.725395) + (xy 196.09061 83.734183) (xy 195.925818 83.818148) (xy 195.905218 83.833114) (xy 196.495204 84.4231) + (xy 196.488989 84.4231) (xy 196.387256 84.450359) (xy 196.296044 84.50302) (xy 196.22157 84.577494) + (xy 196.168909 84.668706) (xy 196.14165 84.770439) (xy 196.14165 84.776654) (xy 195.551664 84.186668) + (xy 195.536698 84.207268) (xy 195.452734 84.372058) (xy 195.395582 84.547956) (xy 195.36665 84.730622) + (xy 195.36665 84.915577) (xy 195.395582 85.098243) (xy 195.452734 85.274141) (xy 195.536696 85.438927) + (xy 195.536701 85.438935) (xy 195.551664 85.459529) (xy 196.14165 84.869543) (xy 196.14165 84.875761) + (xy 196.168909 84.977494) (xy 196.22157 85.068706) (xy 196.296044 85.14318) (xy 196.387256 85.195841) + (xy 196.488989 85.2231) (xy 196.495202 85.2231) (xy 195.905218 85.813084) (xy 195.925814 85.828048) + (xy 195.925822 85.828053) (xy 196.090607 85.912015) (xy 196.117654 85.920803) (xy 196.131867 85.931129) + (xy 196.148352 85.937211) (xy 196.156008 85.948669) (xy 196.167154 85.956767) (xy 196.172582 85.973474) + (xy 196.182345 85.988084) (xy 196.181804 86.001853) (xy 196.186062 86.014957) (xy 196.180632 86.031666) + (xy 196.179943 86.049223) (xy 196.171412 86.060043) (xy 196.167155 86.073148) (xy 196.142064 86.097273) + (xy 196.054302 86.155915) (xy 195.9993 86.1726) (xy 193.81283 86.1726) (xy 193.766133 86.181889) + (xy 193.687156 86.197599) (xy 193.687155 86.197599) (xy 193.687152 86.1976) (xy 193.568773 86.246634) + (xy 193.462233 86.317821) (xy 193.34472 86.435334) (xy 193.273533 86.541875) (xy 193.224499 86.660254) + (xy 193.224499 86.660256) (xy 193.199501 86.785928) (xy 193.199501 86.785931) (xy 193.199501 86.914069) + (xy 193.219856 87.016404) (xy 193.224499 87.039743) (xy 193.224499 87.039745) (xy 193.273533 87.158124) + (xy 193.273534 87.158126) (xy 193.273535 87.158127) (xy 193.344723 87.264669) (xy 193.435331 87.355277) + (xy 193.435334 87.355279) (xy 193.48922 87.391284) (xy 193.5271 87.439334) (xy 193.529502 87.500472) + (xy 193.49551 87.551346) (xy 193.438106 87.572524) (xy 193.434219 87.5726) (xy 174.84859 87.5726) + (xy 174.790399 87.553693) (xy 174.754435 87.504193) (xy 174.754435 87.443007) (xy 174.778584 87.403598) + (xy 174.832858 87.349325) (xy 174.923198 87.214121) (xy 174.985426 87.063889) (xy 175.01715 86.904405) + (xy 175.01715 86.741795) (xy 174.985426 86.582311) (xy 174.923198 86.432079) (xy 174.832858 86.296875) + (xy 174.717875 86.181892) (xy 174.706068 86.174003) (xy 174.582668 86.09155) (xy 174.43244 86.029324) + (xy 174.272955 85.9976) (xy 174.110345 85.9976) (xy 174.110344 85.9976) (xy 173.950859 86.029324) + (xy 173.800631 86.09155) (xy 173.665428 86.181889) (xy 173.550439 86.296878) (xy 173.4601 86.432081) + (xy 173.397874 86.582309) (xy 173.36615 86.741794) (xy 173.36615 86.904405) (xy 173.397874 87.06389) + (xy 173.4601 87.214118) (xy 173.525805 87.312454) (xy 173.550442 87.349325) (xy 173.604715 87.403598) + (xy 173.632491 87.458113) (xy 173.62292 87.518545) (xy 173.579655 87.56181) (xy 173.53471 87.5726) + (xy 155.880418 87.5726) (xy 155.822227 87.553693) (xy 155.810414 87.543604) (xy 152.971017 84.704206) + (xy 152.907502 84.640691) (xy 167.3995 84.640691) (xy 167.3995 84.759309) (xy 167.423857 84.850209) + (xy 167.430202 84.87389) (xy 167.489507 84.976608) (xy 167.489509 84.97661) (xy 167.489511 84.976613) + (xy 167.573387 85.060489) (xy 167.573389 85.06049) (xy 167.573391 85.060492) (xy 167.67611 85.119797) + (xy 167.676111 85.119797) (xy 167.676114 85.119799) (xy 167.790691 85.1505) (xy 167.790693 85.1505) + (xy 167.909307 85.1505) (xy 167.909309 85.1505) (xy 168.023886 85.119799) (xy 168.08093 85.086863) + (xy 168.130431 85.0736) (xy 173.335746 85.0736) (xy 173.393937 85.092507) (xy 173.42721 85.134714) + (xy 173.460101 85.21412) (xy 173.500206 85.274141) (xy 173.550442 85.349325) (xy 173.665425 85.464308) + (xy 173.800629 85.554648) (xy 173.80063 85.554648) (xy 173.800631 85.554649) (xy 173.875745 85.585762) + (xy 173.950861 85.616876) (xy 174.110345 85.6486) (xy 174.110346 85.6486) (xy 174.272954 85.6486) + (xy 174.272955 85.6486) (xy 174.432439 85.616876) (xy 174.582671 85.554648) (xy 174.717875 85.464308) + (xy 174.832858 85.349325) (xy 174.923198 85.214121) (xy 174.985426 85.063889) (xy 175.01715 84.904405) + (xy 175.01715 84.741795) (xy 174.985426 84.582311) (xy 174.923198 84.432079) (xy 174.832858 84.296875) + (xy 174.717875 84.181892) (xy 174.705152 84.173391) (xy 174.582668 84.09155) (xy 174.43244 84.029324) + (xy 174.272955 83.9976) (xy 174.110345 83.9976) (xy 174.110344 83.9976) (xy 173.950859 84.029324) + (xy 173.800631 84.09155) (xy 173.665428 84.181889) (xy 173.550439 84.296878) (xy 173.460101 84.432079) + (xy 173.42721 84.511486) (xy 173.387473 84.558012) (xy 173.335746 84.5726) (xy 168.353796 84.5726) + (xy 168.295605 84.553693) (xy 168.26806 84.523101) (xy 168.222743 84.444612) (xy 168.210489 84.423387) + (xy 168.126613 84.339511) (xy 168.12661 84.339509) (xy 168.126608 84.339507) (xy 168.023889 84.280202) + (xy 168.02389 84.280202) (xy 168.008615 84.276109) (xy 167.909309 84.2495) (xy 167.790691 84.2495) + (xy 167.720567 84.268289) (xy 167.676109 84.280202) (xy 167.573391 84.339507) (xy 167.489507 84.423391) + (xy 167.430202 84.526109) (xy 167.415143 84.582311) (xy 167.3995 84.640691) (xy 152.907502 84.640691) + (xy 150.709415 82.442604) (xy 150.681638 82.388087) (xy 150.691209 82.327655) (xy 150.734474 82.28439) + (xy 150.779419 82.2736) (xy 150.905265 82.2736) (xy 150.905266 82.2736) (xy 151.088901 82.237073) + (xy 151.261881 82.165422) (xy 151.261884 82.165419) (xy 151.261888 82.165418) (xy 151.307397 82.135009) + (xy 151.417558 82.061402) (xy 151.549952 81.929008) (xy 151.643486 81.789025) (xy 151.653968 81.773338) + (xy 151.653969 81.773334) (xy 151.653972 81.773331) (xy 151.725623 81.600351) (xy 151.76215 81.416716) + (xy 151.76215 81.229484) (xy 151.725623 81.045849) (xy 151.653972 80.872869) (xy 151.65397 80.872867) + (xy 151.653968 80.872861) (xy 151.58553 80.770439) (xy 151.549952 80.717192) (xy 151.417558 80.584798) + (xy 151.36242 80.547956) (xy 151.261888 80.480781) (xy 151.261879 80.480777) (xy 151.088899 80.409126) + (xy 150.905268 80.3726) (xy 150.905266 80.3726) (xy 150.718034 80.3726) (xy 150.718031 80.3726) + (xy 150.5344 80.409126) (xy 150.36142 80.480777) (xy 150.361411 80.480781) (xy 150.205742 80.584798) + (xy 150.205738 80.584801) (xy 150.073351 80.717188) (xy 150.073348 80.717192) (xy 149.969331 80.872861) + (xy 149.969327 80.87287) (xy 149.897676 81.04585) (xy 149.86115 81.229481) (xy 149.86115 81.355331) + (xy 149.853986 81.377378) (xy 149.85036 81.400276) (xy 149.844711 81.405924) (xy 149.842243 81.413522) + (xy 149.823486 81.427149) (xy 149.807095 81.443541) (xy 149.799205 81.44479) (xy 149.792743 81.449486) + (xy 149.769558 81.449486) (xy 149.746663 81.453112) (xy 149.739546 81.449486) (xy 149.731557 81.449486) + (xy 149.692146 81.425335) (xy 149.652846 81.386035) (xy 149.625069 81.331518) (xy 149.62385 81.316031) + (xy 149.62385 81.273271) (xy 149.585715 81.181205) (xy 149.585714 81.181204) (xy 149.585714 81.181203) + (xy 149.515247 81.110736) (xy 149.515245 81.110735) (xy 149.515244 81.110734) (xy 149.423179 81.0726) + (xy 149.423178 81.0726) (xy 149.262853 81.0726) (xy 149.204662 81.053693) (xy 149.171389 81.011486) + (xy 149.157309 80.977494) (xy 149.113972 80.872869) (xy 149.11397 80.872867) (xy 149.113968 80.872861) + (xy 149.04553 80.770439) (xy 149.009952 80.717192) (xy 148.877558 80.584798) (xy 148.82242 80.547956) + (xy 148.721888 80.480781) (xy 148.721879 80.480777) (xy 148.548899 80.409126) (xy 148.365268 80.3726) + (xy 148.365266 80.3726) (xy 148.178034 80.3726) (xy 148.178031 80.3726) (xy 147.9944 80.409126) + (xy 147.82142 80.480777) (xy 147.821411 80.480781) (xy 147.665742 80.584798) (xy 147.665738 80.584801) + (xy 147.533351 80.717188) (xy 147.533348 80.717192) (xy 147.429331 80.872861) (xy 147.429327 80.87287) + (xy 147.357676 81.04585) (xy 147.32115 81.229481) (xy 146.682149 81.229481) (xy 146.645623 81.045849) + (xy 146.573972 80.872869) (xy 146.57397 80.872867) (xy 146.573968 80.872861) (xy 146.50553 80.770439) + (xy 146.469952 80.717192) (xy 146.337558 80.584798) (xy 146.28242 80.547956) (xy 146.181888 80.480781) + (xy 146.181879 80.480777) (xy 146.008899 80.409126) (xy 145.825268 80.3726) (xy 145.825266 80.3726) + (xy 145.638034 80.3726) (xy 145.638031 80.3726) (xy 145.4544 80.409126) (xy 145.28142 80.480777) + (xy 145.281411 80.480781) (xy 145.125742 80.584798) (xy 145.125738 80.584801) (xy 144.993351 80.717188) + (xy 144.993348 80.717192) (xy 144.889331 80.872861) (xy 144.889327 80.87287) (xy 144.817676 81.04585) + (xy 144.78115 81.229481) (xy 144.142149 81.229481) (xy 144.105623 81.045849) (xy 144.033972 80.872869) + (xy 144.03397 80.872867) (xy 144.033968 80.872861) (xy 143.96553 80.770439) (xy 143.929952 80.717192) + (xy 143.797558 80.584798) (xy 143.74242 80.547956) (xy 143.641888 80.480781) (xy 143.641879 80.480777) + (xy 143.468899 80.409126) (xy 143.285268 80.3726) (xy 143.285266 80.3726) (xy 143.098034 80.3726) + (xy 143.098031 80.3726) (xy 142.9144 80.409126) (xy 142.74142 80.480777) (xy 142.741411 80.480781) + (xy 142.585742 80.584798) (xy 142.585738 80.584801) (xy 142.453351 80.717188) (xy 142.453348 80.717192) + (xy 142.349331 80.872861) (xy 142.349327 80.87287) (xy 142.277676 81.04585) (xy 142.24115 81.229481) + (xy 141.602149 81.229481) (xy 141.565623 81.045849) (xy 141.493972 80.872869) (xy 141.49397 80.872867) + (xy 141.493968 80.872861) (xy 141.42553 80.770439) (xy 141.389952 80.717192) (xy 141.257558 80.584798) + (xy 141.20242 80.547956) (xy 141.101888 80.480781) (xy 141.101879 80.480777) (xy 140.928899 80.409126) + (xy 140.745268 80.3726) (xy 140.745266 80.3726) (xy 140.558034 80.3726) (xy 140.558031 80.3726) + (xy 140.3744 80.409126) (xy 140.20142 80.480777) (xy 140.201411 80.480781) (xy 140.045742 80.584798) + (xy 140.045738 80.584801) (xy 139.913351 80.717188) (xy 139.913348 80.717192) (xy 139.809331 80.872861) + (xy 139.809327 80.87287) (xy 139.737676 81.04585) (xy 139.70115 81.229481) (xy 139.062149 81.229481) + (xy 139.025623 81.045849) (xy 138.953972 80.872869) (xy 138.95397 80.872867) (xy 138.953968 80.872861) + (xy 138.88553 80.770439) (xy 138.849952 80.717192) (xy 138.717558 80.584798) (xy 138.66242 80.547956) + (xy 138.561888 80.480781) (xy 138.561879 80.480777) (xy 138.388899 80.409126) (xy 138.205268 80.3726) + (xy 138.205266 80.3726) (xy 138.018034 80.3726) (xy 138.018031 80.3726) (xy 137.8344 80.409126) + (xy 137.66142 80.480777) (xy 137.661411 80.480781) (xy 137.505742 80.584798) (xy 137.505738 80.584801) + (xy 137.373351 80.717188) (xy 137.373348 80.717192) (xy 137.269331 80.872861) (xy 137.269327 80.87287) + (xy 137.197676 81.04585) (xy 137.16115 81.229481) (xy 136.522149 81.229481) (xy 136.485623 81.045849) + (xy 136.413972 80.872869) (xy 136.41397 80.872867) (xy 136.413968 80.872861) (xy 136.34553 80.770439) + (xy 136.309952 80.717192) (xy 136.177558 80.584798) (xy 136.12242 80.547956) (xy 136.021888 80.480781) + (xy 136.021879 80.480777) (xy 135.848899 80.409126) (xy 135.665268 80.3726) (xy 135.665266 80.3726) + (xy 135.478034 80.3726) (xy 135.478031 80.3726) (xy 135.2944 80.409126) (xy 135.12142 80.480777) + (xy 135.121411 80.480781) (xy 134.965742 80.584798) (xy 134.965738 80.584801) (xy 134.833351 80.717188) + (xy 134.833348 80.717192) (xy 134.729331 80.872861) (xy 134.729327 80.87287) (xy 134.657676 81.04585) + (xy 134.62115 81.229481) (xy 133.982149 81.229481) (xy 133.945623 81.045849) (xy 133.873972 80.872869) + (xy 133.87397 80.872867) (xy 133.873968 80.872861) (xy 133.80553 80.770439) (xy 133.769952 80.717192) + (xy 133.637558 80.584798) (xy 133.58242 80.547956) (xy 133.481888 80.480781) (xy 133.481879 80.480777) + (xy 133.308899 80.409126) (xy 133.125268 80.3726) (xy 133.125266 80.3726) (xy 132.938034 80.3726) + (xy 132.938031 80.3726) (xy 132.7544 80.409126) (xy 132.58142 80.480777) (xy 132.581411 80.480781) + (xy 132.425742 80.584798) (xy 132.425738 80.584801) (xy 132.293351 80.717188) (xy 132.293348 80.717192) + (xy 132.189331 80.872861) (xy 132.189327 80.87287) (xy 132.117676 81.04585) (xy 132.08115 81.229481) + (xy 129.922149 81.229481) (xy 129.885623 81.045849) (xy 129.813972 80.872869) (xy 129.81397 80.872867) + (xy 129.813968 80.872861) (xy 129.74553 80.770439) (xy 129.709952 80.717192) (xy 129.577558 80.584798) + (xy 129.52242 80.547956) (xy 129.421888 80.480781) (xy 129.421879 80.480777) (xy 129.248899 80.409126) + (xy 129.065268 80.3726) (xy 129.065266 80.3726) (xy 128.878034 80.3726) (xy 128.878031 80.3726) + (xy 128.6944 80.409126) (xy 128.52142 80.480777) (xy 128.521411 80.480781) (xy 128.365742 80.584798) + (xy 128.365738 80.584801) (xy 128.233351 80.717188) (xy 128.233348 80.717192) (xy 128.129331 80.872861) + (xy 128.129327 80.87287) (xy 128.057676 81.04585) (xy 128.02115 81.229481) (xy 127.382149 81.229481) + (xy 127.345623 81.045849) (xy 127.273972 80.872869) (xy 127.27397 80.872867) (xy 127.273968 80.872861) + (xy 127.20553 80.770439) (xy 127.169952 80.717192) (xy 127.037558 80.584798) (xy 126.98242 80.547956) + (xy 126.881888 80.480781) (xy 126.881879 80.480777) (xy 126.708899 80.409126) (xy 126.525268 80.3726) + (xy 126.525266 80.3726) (xy 126.338034 80.3726) (xy 126.338031 80.3726) (xy 126.1544 80.409126) + (xy 125.98142 80.480777) (xy 125.981411 80.480781) (xy 125.825742 80.584798) (xy 125.825738 80.584801) + (xy 125.693351 80.717188) (xy 125.693348 80.717192) (xy 125.589331 80.872861) (xy 125.589327 80.87287) + (xy 125.517676 81.04585) (xy 125.48115 81.229481) (xy 124.842149 81.229481) (xy 124.805623 81.045849) + (xy 124.733972 80.872869) (xy 124.73397 80.872867) (xy 124.733968 80.872861) (xy 124.66553 80.770439) + (xy 124.629952 80.717192) (xy 124.497558 80.584798) (xy 124.44242 80.547956) (xy 124.341888 80.480781) + (xy 124.341879 80.480777) (xy 124.168899 80.409126) (xy 123.985268 80.3726) (xy 123.985266 80.3726) + (xy 123.798034 80.3726) (xy 123.798031 80.3726) (xy 123.6144 80.409126) (xy 123.44142 80.480777) + (xy 123.441411 80.480781) (xy 123.285742 80.584798) (xy 123.285738 80.584801) (xy 123.153351 80.717188) + (xy 123.153348 80.717192) (xy 123.049331 80.872861) (xy 123.049327 80.87287) (xy 122.977676 81.04585) + (xy 122.94115 81.229481) (xy 122.302149 81.229481) (xy 122.265623 81.045849) (xy 122.193972 80.872869) + (xy 122.19397 80.872867) (xy 122.193968 80.872861) (xy 122.12553 80.770439) (xy 122.089952 80.717192) + (xy 121.957558 80.584798) (xy 121.90242 80.547956) (xy 121.801888 80.480781) (xy 121.801879 80.480777) + (xy 121.628899 80.409126) (xy 121.445268 80.3726) (xy 121.445266 80.3726) (xy 121.258034 80.3726) + (xy 121.258031 80.3726) (xy 121.0744 80.409126) (xy 120.90142 80.480777) (xy 120.901411 80.480781) + (xy 120.745742 80.584798) (xy 120.745738 80.584801) (xy 120.613351 80.717188) (xy 120.613348 80.717192) + (xy 120.509331 80.872861) (xy 120.509327 80.87287) (xy 120.437676 81.04585) (xy 120.40115 81.229481) + (xy 119.762149 81.229481) (xy 119.725623 81.045849) (xy 119.653972 80.872869) (xy 119.65397 80.872867) + (xy 119.653968 80.872861) (xy 119.58553 80.770439) (xy 119.549952 80.717192) (xy 119.417558 80.584798) + (xy 119.36242 80.547956) (xy 119.261888 80.480781) (xy 119.261879 80.480777) (xy 119.088899 80.409126) + (xy 118.905268 80.3726) (xy 118.905266 80.3726) (xy 118.718034 80.3726) (xy 118.718031 80.3726) + (xy 118.5344 80.409126) (xy 118.36142 80.480777) (xy 118.361411 80.480781) (xy 118.205742 80.584798) + (xy 118.205738 80.584801) (xy 118.073351 80.717188) (xy 118.073348 80.717192) (xy 117.969331 80.872861) + (xy 117.969327 80.87287) (xy 117.897676 81.04585) (xy 117.86115 81.229481) (xy 117.222149 81.229481) + (xy 117.185623 81.045849) (xy 117.113972 80.872869) (xy 117.11397 80.872867) (xy 117.113968 80.872861) + (xy 117.04553 80.770439) (xy 117.009952 80.717192) (xy 116.877558 80.584798) (xy 116.82242 80.547956) + (xy 116.721888 80.480781) (xy 116.721879 80.480777) (xy 116.548899 80.409126) (xy 116.365268 80.3726) + (xy 116.365266 80.3726) (xy 116.178034 80.3726) (xy 116.178031 80.3726) (xy 115.9944 80.409126) + (xy 115.82142 80.480777) (xy 115.821411 80.480781) (xy 115.665742 80.584798) (xy 115.665738 80.584801) + (xy 115.533351 80.717188) (xy 115.533348 80.717192) (xy 115.429331 80.872861) (xy 115.429327 80.87287) + (xy 115.357676 81.04585) (xy 115.32115 81.229481) (xy 114.224203 81.229481) (xy 114.197575 81.130107) + (xy 114.164662 81.0731) (xy 115.008259 81.0731) (xy 115.008259 81.073099) (xy 114.99964 81.018685) + (xy 114.936406 80.824072) (xy 114.843511 80.641753) (xy 114.723235 80.476208) (xy 114.578541 80.331514) + (xy 114.412996 80.211238) (xy 114.230677 80.118343) (xy 114.219634 80.114755) (xy 114.170134 80.078791) + (xy 114.151227 80.0206) (xy 114.170134 79.962409) (xy 114.219635 79.926445) (xy 114.250227 79.9216) + (xy 164.13715 79.9216) (xy 164.195341 79.940507) (xy 164.231305 79.990007) (xy 164.23615 80.0206) + (xy 164.23615 80.638926) (xy 164.241449 80.679173) (xy 164.265904 80.770439) (xy 164.275522 80.806332) + (xy 164.275526 80.806346) (xy 164.289072 80.83905) (xy 164.291058 80.843843) (xy 164.332474 80.915577) + (xy 164.356886 80.95786) (xy 164.38159 80.990055) (xy 164.381592 80.990057) (xy 164.381596 80.990062) + (xy 164.474688 81.083154) (xy 164.474692 81.083157) (xy 164.474694 81.083159) (xy 164.488335 81.093626) + (xy 164.506893 81.107866) (xy 164.620907 81.173692) (xy 164.65841 81.189226) (xy 164.785577 81.223301) + (xy 164.825824 81.2286) (xy 165.391648 81.2286) (xy 165.39165 81.2286) (xy 165.4694 81.207767) (xy 165.471648 81.205518) + (xy 165.526163 81.177743) (xy 165.586595 81.187314) (xy 165.61165 81.205517) (xy 165.6139 81.207767) + (xy 165.69165 81.2286) (xy 165.691652 81.2286) (xy 166.257475 81.2286) (xy 166.257476 81.2286) (xy 166.297723 81.223301) + (xy 166.42489 81.189226) (xy 166.462393 81.173692) (xy 166.576407 81.107866) (xy 166.608612 81.083154) + (xy 166.701704 80.990062) (xy 166.726416 80.957857) (xy 166.792242 80.843843) (xy 166.807776 80.80634) + (xy 166.828065 80.730622) (xy 173.01665 80.730622) (xy 173.01665 80.915577) (xy 173.045582 81.098243) + (xy 173.102734 81.274141) (xy 173.186696 81.438927) (xy 173.186701 81.438935) (xy 173.201664 81.459529) + (xy 173.79165 80.869543) (xy 173.79165 80.875761) (xy 173.818909 80.977494) (xy 173.87157 81.068706) + (xy 173.946044 81.14318) (xy 174.037256 81.195841) (xy 174.138989 81.2231) (xy 174.145202 81.2231) + (xy 173.555218 81.813084) (xy 173.575814 81.828048) (xy 173.575822 81.828053) (xy 173.74061 81.912016) + (xy 173.740608 81.912016) (xy 173.767654 81.920803) (xy 173.817155 81.956766) (xy 173.836063 82.014956) + (xy 173.817157 82.073147) (xy 173.792065 82.097273) (xy 173.665429 82.181888) (xy 173.550439 82.296878) + (xy 173.4601 82.432081) (xy 173.397874 82.582309) (xy 173.36615 82.741794) (xy 173.36615 82.904405) + (xy 173.397874 83.06389) (xy 173.4601 83.214118) (xy 173.481741 83.246507) (xy 173.550442 83.349325) + (xy 173.665425 83.464308) (xy 173.800629 83.554648) (xy 173.80063 83.554648) (xy 173.800631 83.554649) + (xy 173.868111 83.5826) (xy 173.950861 83.616876) (xy 174.110345 83.6486) (xy 174.110346 83.6486) + (xy 174.272954 83.6486) (xy 174.272955 83.6486) (xy 174.432439 83.616876) (xy 174.582671 83.554648) + (xy 174.717875 83.464308) (xy 174.832858 83.349325) (xy 174.923198 83.214121) (xy 174.985426 83.063889) + (xy 175.01715 82.904405) (xy 175.01715 82.741795) (xy 174.985426 82.582311) (xy 174.944203 82.48279) + (xy 174.923199 82.432081) (xy 174.921736 82.429892) (xy 174.832858 82.296875) (xy 174.717875 82.181892) + (xy 174.717869 82.181888) (xy 174.591235 82.097274) (xy 174.553355 82.049224) (xy 174.550953 81.988086) + (xy 174.584946 81.937212) (xy 174.615646 81.920803) (xy 174.642688 81.912017) (xy 174.642689 81.912016) + (xy 174.807487 81.828047) (xy 174.82808 81.813084) (xy 174.238096 81.2231) (xy 174.244311 81.2231) + (xy 174.346044 81.195841) (xy 174.437256 81.14318) (xy 174.51173 81.068706) (xy 174.564391 80.977494) + (xy 174.59165 80.875761) (xy 174.59165 80.869546) (xy 175.181634 81.45953) (xy 175.196597 81.438937) + (xy 175.280565 81.274141) (xy 175.337717 81.098243) (xy 175.36665 80.915577) (xy 175.36665 80.741794) + (xy 195.71615 80.741794) (xy 195.71615 80.904405) (xy 195.747874 81.06389) (xy 195.8101 81.214118) + (xy 195.849624 81.273271) (xy 195.900442 81.349325) (xy 196.015425 81.464308) (xy 196.150629 81.554648) + (xy 196.300861 81.616876) (xy 196.460345 81.6486) (xy 196.460346 81.6486) (xy 196.622954 81.6486) + (xy 196.622955 81.6486) (xy 196.782439 81.616876) (xy 196.932671 81.554648) (xy 197.067875 81.464308) + (xy 197.182858 81.349325) (xy 197.273198 81.214121) (xy 197.335426 81.063889) (xy 197.36715 80.904405) + (xy 197.36715 80.741795) (xy 197.335426 80.582311) (xy 197.273198 80.432079) (xy 197.182858 80.296875) + (xy 197.067875 80.181892) (xy 196.992167 80.131306) (xy 196.932668 80.09155) (xy 196.78244 80.029324) + (xy 196.622955 79.9976) (xy 196.460345 79.9976) (xy 196.460344 79.9976) (xy 196.300859 80.029324) + (xy 196.150631 80.09155) (xy 196.015428 80.181889) (xy 195.900439 80.296878) (xy 195.8101 80.432081) + (xy 195.747874 80.582309) (xy 195.71615 80.741794) (xy 175.36665 80.741794) (xy 175.36665 80.730622) + (xy 175.337717 80.547956) (xy 175.280565 80.372058) (xy 175.196603 80.207272) (xy 175.196598 80.207264) + (xy 175.181634 80.186668) (xy 174.59165 80.776652) (xy 174.59165 80.770439) (xy 174.564391 80.668706) + (xy 174.51173 80.577494) (xy 174.437256 80.50302) (xy 174.346044 80.450359) (xy 174.244311 80.4231) + (xy 174.238094 80.4231) (xy 174.82808 79.833114) (xy 174.807485 79.818151) (xy 174.807477 79.818146) + (xy 174.642693 79.734185) (xy 174.615643 79.725396) (xy 174.566143 79.689432) (xy 174.547236 79.631241) + (xy 174.566143 79.57305) (xy 174.591232 79.548927) (xy 174.717875 79.464308) (xy 174.832858 79.349325) + (xy 174.923198 79.214121) (xy 174.985426 79.063889) (xy 175.01715 78.904405) (xy 175.01715 78.741795) + (xy 175.01715 78.741794) (xy 195.71615 78.741794) (xy 195.71615 78.904405) (xy 195.747874 79.06389) + (xy 195.8101 79.214118) (xy 195.899419 79.347795) (xy 195.900442 79.349325) (xy 196.015425 79.464308) + (xy 196.150629 79.554648) (xy 196.300861 79.616876) (xy 196.460345 79.6486) (xy 196.460346 79.6486) + (xy 196.622954 79.6486) (xy 196.622955 79.6486) (xy 196.782439 79.616876) (xy 196.932671 79.554648) + (xy 197.067875 79.464308) (xy 197.182858 79.349325) (xy 197.273198 79.214121) (xy 197.335426 79.063889) + (xy 197.36715 78.904405) (xy 197.36715 78.741795) (xy 197.335426 78.582311) (xy 197.297607 78.491007) + (xy 197.273199 78.432081) (xy 197.248082 78.394491) (xy 197.182858 78.296875) (xy 197.067875 78.181892) + (xy 196.932671 78.091552) (xy 196.93267 78.091551) (xy 196.932668 78.09155) (xy 196.78244 78.029324) + (xy 196.622955 77.9976) (xy 196.460345 77.9976) (xy 196.460344 77.9976) (xy 196.300859 78.029324) + (xy 196.150631 78.09155) (xy 196.015428 78.181889) (xy 195.900439 78.296878) (xy 195.8101 78.432081) + (xy 195.747874 78.582309) (xy 195.71615 78.741794) (xy 175.01715 78.741794) (xy 174.985426 78.582311) + (xy 174.947607 78.491007) (xy 174.923199 78.432081) (xy 174.898082 78.394491) (xy 174.832858 78.296875) + (xy 174.717875 78.181892) (xy 174.582671 78.091552) (xy 174.58267 78.091551) (xy 174.582668 78.09155) + (xy 174.43244 78.029324) (xy 174.272955 77.9976) (xy 174.110345 77.9976) (xy 174.110344 77.9976) + (xy 173.950859 78.029324) (xy 173.800631 78.09155) (xy 173.665428 78.181889) (xy 173.550439 78.296878) + (xy 173.4601 78.432081) (xy 173.397874 78.582309) (xy 173.36615 78.741794) (xy 173.36615 78.904405) + (xy 173.397874 79.06389) (xy 173.4601 79.214118) (xy 173.549419 79.347795) (xy 173.550442 79.349325) + (xy 173.665425 79.464308) (xy 173.665428 79.46431) (xy 173.792064 79.548925) (xy 173.829944 79.596975) + (xy 173.832346 79.658113) (xy 173.798354 79.708987) (xy 173.767657 79.725395) (xy 173.74061 79.734183) + (xy 173.575818 79.818148) (xy 173.555218 79.833114) (xy 174.145204 80.4231) (xy 174.138989 80.4231) + (xy 174.037256 80.450359) (xy 173.946044 80.50302) (xy 173.87157 80.577494) (xy 173.818909 80.668706) + (xy 173.79165 80.770439) (xy 173.79165 80.776654) (xy 173.201664 80.186668) (xy 173.186698 80.207268) + (xy 173.102734 80.372058) (xy 173.045582 80.547956) (xy 173.01665 80.730622) (xy 166.828065 80.730622) + (xy 166.841851 80.679173) (xy 166.84715 80.638926) (xy 166.84715 80.621127) (xy 166.848217 80.613918) + (xy 166.858743 80.592728) (xy 166.866057 80.570221) (xy 166.875306 80.559391) (xy 166.87544 80.559122) + (xy 166.875613 80.559031) (xy 166.87614 80.558414) (xy 167.303249 80.131306) (xy 167.325302 80.098301) + (xy 167.374427 80.02478) (xy 167.423455 79.906415) (xy 167.44845 79.780759) (xy 167.44845 78.966241) + (xy 167.423455 78.840585) (xy 167.374427 78.72222) (xy 167.303249 78.615694) (xy 167.212656 78.525101) + (xy 167.197498 78.514973) (xy 167.106127 78.453921) (xy 166.987766 78.404895) (xy 166.862109 78.3799) + (xy 166.733991 78.3799) (xy 166.73399 78.3799) (xy 166.608333 78.404895) (xy 166.489973 78.453921) + (xy 166.452684 78.478836) (xy 166.393795 78.495443) (xy 166.336392 78.474264) (xy 166.3024 78.42339) + (xy 166.304804 78.362252) (xy 166.327678 78.326517) (xy 167.912401 76.741794) (xy 173.36615 76.741794) + (xy 173.36615 76.904405) (xy 173.397874 77.06389) (xy 173.4601 77.214118) (xy 173.460101 77.21412) + (xy 173.460102 77.214121) (xy 173.550442 77.349325) (xy 173.665425 77.464308) (xy 173.800629 77.554648) + (xy 173.80063 77.554648) (xy 173.800631 77.554649) (xy 173.813045 77.559791) (xy 173.950861 77.616876) + (xy 174.110345 77.6486) (xy 174.110346 77.6486) (xy 174.272954 77.6486) (xy 174.272955 77.6486) + (xy 174.432439 77.616876) (xy 174.582671 77.554648) (xy 174.717875 77.464308) (xy 174.832858 77.349325) + (xy 174.923198 77.214121) (xy 174.985426 77.063889) (xy 175.01715 76.904405) (xy 175.01715 76.741795) + (xy 174.985426 76.582311) (xy 174.923198 76.432079) (xy 174.832858 76.296875) (xy 174.717875 76.181892) + (xy 174.714166 76.179414) (xy 174.582668 76.09155) (xy 174.43244 76.029324) (xy 174.272955 75.9976) + (xy 174.110345 75.9976) (xy 174.110344 75.9976) (xy 173.950859 76.029324) (xy 173.800631 76.09155) + (xy 173.665428 76.181889) (xy 173.550439 76.296878) (xy 173.4601 76.432081) (xy 173.397874 76.582309) + (xy 173.36615 76.741794) (xy 167.912401 76.741794) (xy 170.5387 74.115496) (xy 170.593217 74.087719) + (xy 170.608704 74.0865) (xy 173.26715 74.0865) (xy 173.325341 74.105407) (xy 173.361305 74.154907) + (xy 173.36615 74.1855) (xy 173.36615 75.512927) (xy 173.374882 75.55682) (xy 173.374884 75.556824) + (xy 173.389907 75.579307) (xy 173.408146 75.606604) (xy 173.457928 75.639867) (xy 173.468977 75.642064) + (xy 173.501822 75.648599) (xy 173.501828 75.648599) (xy 173.50183 75.6486) (xy 173.501831 75.6486) + (xy 174.881469 75.6486) (xy 174.88147 75.6486) (xy 174.881471 75.648599) (xy 174.881477 75.648599) + (xy 174.903273 75.644262) (xy 174.925372 75.639867) (xy 174.975154 75.606604) (xy 175.008417 75.556822) + (xy 175.01715 75.51292) (xy 175.01715 74.1855) (xy 175.036057 74.127309) (xy 175.085557 74.091345) + (xy 175.11615 74.0865) (xy 195.26765 74.0865) (xy 195.325841 74.105407) (xy 195.361805 74.154907) + (xy 195.36665 74.1855) (xy 195.36665 74.573099) (xy 195.366651 74.5731) (xy 196.225964 74.5731) + (xy 196.22157 74.577494) (xy 196.168909 74.668706) (xy 196.14165 74.770439) (xy 196.14165 74.875761) + (xy 196.168909 74.977494) (xy 196.22157 75.068706) (xy 196.225964 75.0731) (xy 195.366651 75.0731) + (xy 195.36665 75.073101) (xy 195.36665 75.545924) (xy 195.366649 75.545924) (xy 195.373051 75.60547) + (xy 195.373053 75.605481) (xy 195.423296 75.740188) (xy 195.423297 75.74019) (xy 195.509457 75.855284) + (xy 195.509465 75.855292) (xy 195.624559 75.941452) (xy 195.624561 75.941453) (xy 195.759268 75.991696) + (xy 195.759279 75.991698) (xy 195.818826 75.9981) (xy 195.964129 75.9981) (xy 196.02232 76.017007) + (xy 196.058284 76.066507) (xy 196.058284 76.127693) (xy 196.02232 76.177193) (xy 196.019133 76.179414) + (xy 196.015428 76.181889) (xy 195.900439 76.296878) (xy 195.8101 76.432081) (xy 195.747874 76.582309) + (xy 195.71615 76.741794) (xy 195.71615 76.904405) (xy 195.747874 77.06389) (xy 195.8101 77.214118) + (xy 195.810101 77.21412) (xy 195.810102 77.214121) (xy 195.900442 77.349325) (xy 196.015425 77.464308) + (xy 196.150629 77.554648) (xy 196.15063 77.554648) (xy 196.150631 77.554649) (xy 196.163045 77.559791) + (xy 196.300861 77.616876) (xy 196.460345 77.6486) (xy 196.460346 77.6486) (xy 196.622954 77.6486) + (xy 196.622955 77.6486) (xy 196.782439 77.616876) (xy 196.932671 77.554648) (xy 197.067875 77.464308) + (xy 197.182858 77.349325) (xy 197.200382 77.323099) (xy 208.689418 77.323099) (xy 208.689419 77.3231) + (xy 209.733638 77.3231) (xy 209.700725 77.380107) (xy 209.66665 77.507274) (xy 209.66665 77.638926) + (xy 209.700725 77.766093) (xy 209.733638 77.8231) (xy 208.689419 77.8231) (xy 208.699891 77.889222) + (xy 208.765554 78.091315) (xy 208.862025 78.280652) (xy 208.986927 78.452564) (xy 209.137185 78.602822) + (xy 209.309097 78.727724) (xy 209.498436 78.824196) (xy 209.668478 78.879445) (xy 209.717978 78.915409) + (xy 209.736886 78.973599) (xy 209.717979 79.03179) (xy 209.668479 79.067754) (xy 209.637886 79.0726) + (xy 209.385128 79.0726) (xy 209.385126 79.072601) (xy 209.29135 79.087452) (xy 209.291345 79.087454) + (xy 209.178309 79.145049) (xy 209.088599 79.234759) (xy 209.031004 79.347795) (xy 209.01615 79.441578) + (xy 209.01615 80.704621) (xy 209.016151 80.704623) (xy 209.031002 80.798399) (xy 209.031004 80.798404) + (xy 209.0886 80.911442) (xy 209.178308 81.00115) (xy 209.291346 81.058746) (xy 209.385131 81.0736) + (xy 210.948168 81.073599) (xy 210.948171 81.073599) (xy 210.948172 81.073598) (xy 210.995061 81.066172) + (xy 211.041949 81.058747) (xy 211.041949 81.058746) (xy 211.041954 81.058746) (xy 211.154992 81.00115) + (xy 211.2447 80.911442) (xy 211.302296 80.798404) (xy 211.31715 80.704619) (xy 211.317149 79.441582) + (xy 211.317149 79.441581) (xy 211.317149 79.441578) (xy 211.317148 79.441576) (xy 211.302297 79.3478) + (xy 211.302296 79.347798) (xy 211.302296 79.347796) (xy 211.2447 79.234758) (xy 211.154992 79.14505) + (xy 211.041954 79.087454) (xy 211.041955 79.087454) (xy 210.948172 79.0726) (xy 210.695416 79.0726) + (xy 210.637225 79.053693) (xy 210.601261 79.004193) (xy 210.601261 78.943007) (xy 210.637225 78.893507) + (xy 210.664824 78.879445) (xy 210.834863 78.824196) (xy 211.024202 78.727724) (xy 211.196114 78.602822) + (xy 211.346372 78.452564) (xy 211.471274 78.280652) (xy 211.567745 78.091315) (xy 211.633408 77.889222) + (xy 211.643881 77.8231) (xy 210.599662 77.8231) (xy 210.632575 77.766093) (xy 210.66665 77.638926) + (xy 210.66665 77.507274) (xy 210.632575 77.380107) (xy 210.599662 77.3231) (xy 211.643881 77.3231) + (xy 211.643881 77.323099) (xy 211.633408 77.256977) (xy 211.567745 77.054884) (xy 211.471274 76.865547) + (xy 211.346372 76.693635) (xy 211.196114 76.543377) (xy 211.024202 76.418475) (xy 210.834865 76.322004) + (xy 210.632771 76.25634) (xy 210.4229 76.2231) (xy 210.416651 76.2231) (xy 210.41665 76.223101) + (xy 210.41665 77.140088) (xy 210.359643 77.107175) (xy 210.232476 77.0731) (xy 210.100824 77.0731) + (xy 209.973657 77.107175) (xy 209.91665 77.140088) (xy 209.91665 76.223101) (xy 209.916649 76.2231) + (xy 209.9104 76.2231) (xy 209.700528 76.25634) (xy 209.498434 76.322004) (xy 209.309097 76.418475) + (xy 209.137185 76.543377) (xy 208.986927 76.693635) (xy 208.862025 76.865547) (xy 208.765554 77.054884) + (xy 208.699891 77.256977) (xy 208.689418 77.323099) (xy 197.200382 77.323099) (xy 197.273198 77.214121) + (xy 197.335426 77.063889) (xy 197.36715 76.904405) (xy 197.36715 76.741795) (xy 197.335426 76.582311) + (xy 197.273198 76.432079) (xy 197.182858 76.296875) (xy 197.067875 76.181892) (xy 197.067871 76.181889) + (xy 197.064167 76.179414) (xy 197.026289 76.131363) (xy 197.023889 76.070225) (xy 197.057883 76.019352) + (xy 197.115287 75.998176) (xy 197.119171 75.9981) (xy 197.264474 75.9981) (xy 197.32402 75.991698) + (xy 197.324031 75.991696) (xy 197.458738 75.941453) (xy 197.45874 75.941452) (xy 197.573834 75.855292) + (xy 197.573842 75.855284) (xy 197.660002 75.74019) (xy 197.660003 75.740188) (xy 197.710246 75.605481) + (xy 197.710248 75.60547) (xy 197.71665 75.545924) (xy 197.71665 75.073101) (xy 197.716649 75.0731) + (xy 196.857336 75.0731) (xy 196.86173 75.068706) (xy 196.914391 74.977494) (xy 196.94165 74.875761) + (xy 196.94165 74.770439) (xy 196.914391 74.668706) (xy 196.86173 74.577494) (xy 196.857336 74.5731) + (xy 197.716649 74.5731) (xy 197.71665 74.573099) (xy 197.71665 74.1855) (xy 197.735557 74.127309) + (xy 197.785057 74.091345) (xy 197.81565 74.0865) (xy 198.642818 74.0865) (xy 198.642819 74.0865) + (xy 198.768494 74.061501) (xy 198.886877 74.012465) (xy 198.909124 73.9976) (xy 198.993419 73.941277) + (xy 202.743117 70.191578) (xy 209.01615 70.191578) (xy 209.01615 71.454621) (xy 209.016151 71.454623) + (xy 209.031002 71.548399) (xy 209.031004 71.548404) (xy 209.0886 71.661442) (xy 209.178308 71.75115) + (xy 209.291346 71.808746) (xy 209.385131 71.8236) (xy 210.948168 71.823599) (xy 210.948171 71.823599) + (xy 210.948172 71.823598) (xy 211.001833 71.8151) (xy 211.041949 71.808747) (xy 211.041949 71.808746) + (xy 211.041954 71.808746) (xy 211.154992 71.75115) (xy 211.2447 71.661442) (xy 211.302296 71.548404) + (xy 211.31715 71.454619) (xy 211.317149 70.191582) (xy 211.317149 70.191581) (xy 211.317149 70.191578) + (xy 211.317148 70.191576) (xy 211.302297 70.0978) (xy 211.302296 70.097798) (xy 211.302296 70.097796) + (xy 211.2447 69.984758) (xy 211.154992 69.89505) (xy 211.041954 69.837454) (xy 211.041955 69.837454) + (xy 210.948171 69.8226) (xy 209.385128 69.8226) (xy 209.385126 69.822601) (xy 209.29135 69.837452) + (xy 209.291345 69.837454) (xy 209.178309 69.895049) (xy 209.088599 69.984759) (xy 209.031004 70.097795) + (xy 209.01615 70.191578) (xy 202.743117 70.191578) (xy 204.710139 68.224556) (xy 209.01615 68.224556) + (xy 209.01615 68.421643) (xy 209.054599 68.614934) (xy 209.054599 68.614936) (xy 209.130017 68.797013) + (xy 209.131674 68.799493) (xy 209.239511 68.960882) (xy 209.378868 69.100239) (xy 209.542736 69.209732) + (xy 209.724815 69.285151) (xy 209.918109 69.3236) (xy 209.91811 69.3236) (xy 210.41519 69.3236) + (xy 210.415191 69.3236) (xy 210.608485 69.285151) (xy 210.790564 69.209732) (xy 210.954432 69.100239) + (xy 211.093789 68.960882) (xy 211.203282 68.797014) (xy 211.278701 68.614935) (xy 211.31715 68.421641) + (xy 211.31715 68.224559) (xy 211.278701 68.031265) (xy 211.203282 67.849186) (xy 211.093789 67.685318) + (xy 210.954432 67.545961) (xy 210.844938 67.472799) (xy 210.790563 67.436467) (xy 210.608485 67.361049) + (xy 210.415193 67.3226) (xy 210.415191 67.3226) (xy 209.918109 67.3226) (xy 209.918106 67.3226) + (xy 209.724815 67.361049) (xy 209.724813 67.361049) (xy 209.542736 67.436467) (xy 209.378868 67.545961) + (xy 209.378864 67.545964) (xy 209.239514 67.685314) (xy 209.239511 67.685318) (xy 209.130017 67.849186) + (xy 209.054599 68.031263) (xy 209.054599 68.031265) (xy 209.01615 68.224556) (xy 204.710139 68.224556) + (xy 210.0821 62.852594) (xy 210.136617 62.824818) (xy 210.152104 62.823599) (xy 210.948171 62.823599) + (xy 210.948172 62.823598) (xy 210.995061 62.816172) (xy 211.041949 62.808747) (xy 211.041949 62.808746) + (xy 211.041954 62.808746) (xy 211.154992 62.75115) (xy 211.2447 62.661442) (xy 211.302296 62.548404) + (xy 211.31715 62.454619) (xy 211.317149 61.191582) (xy 211.317149 61.191581) (xy 211.317149 61.191578) + (xy 211.317148 61.191576) (xy 211.302297 61.0978) (xy 211.302296 61.097798) (xy 211.302296 61.097796) + (xy 211.2447 60.984758) (xy 211.154992 60.89505) (xy 211.041954 60.837454) (xy 211.041955 60.837454) + (xy 210.948171 60.8226) (xy 209.435128 60.8226) (xy 209.435126 60.822601) (xy 209.34135 60.837452) + (xy 209.341345 60.837454) (xy 209.228309 60.895049) (xy 209.138599 60.984759) (xy 209.081004 61.097795) + (xy 209.06615 61.191578) (xy 209.06615 61.987645) (xy 209.047243 62.045836) (xy 209.037154 62.057649) + (xy 198.3383 72.756504) (xy 198.283783 72.784281) (xy 198.268296 72.7855) (xy 177.517218 72.7855) + (xy 177.459027 72.766593) (xy 177.423063 72.717093) (xy 177.423063 72.655907) (xy 177.447212 72.616498) + (xy 179.306245 70.757464) (xy 179.306247 70.757464) (xy 179.376714 70.686997) (xy 179.3973 70.637298) + (xy 179.414851 70.594928) (xy 179.414851 70.495272) (xy 179.41485 70.495269) (xy 179.41485 69.245972) + (xy 179.403216 69.217886) (xy 179.376714 69.153903) (xy 179.306247 69.083435) (xy 179.306247 69.083436) + (xy 179.021146 68.798335) (xy 178.993369 68.743818) (xy 178.99215 68.728331) (xy 178.99215 68.264843) + (xy 178.986281 68.224559) (xy 178.982223 68.196707) (xy 178.930848 68.091617) (xy 178.848133 68.008902) + (xy 178.848131 68.008901) (xy 178.743045 67.957527) (xy 178.715789 67.953556) (xy 178.67491 67.9476) + (xy 178.05839 67.9476) (xy 178.024323 67.952563) (xy 177.990254 67.957527) (xy 177.885168 68.008901) + (xy 177.80245 68.091619) (xy 177.797685 68.098294) (xy 177.795157 68.096489) (xy 177.762532 68.130201) + (xy 177.702264 68.140759) (xy 177.647301 68.113877) (xy 177.618635 68.059822) (xy 177.61715 68.042738) + (xy 177.61715 65.525352) (xy 177.636057 65.467161) (xy 177.67267 65.436411) (xy 177.773133 65.387298) + (xy 177.855848 65.304583) (xy 177.907223 65.199493) (xy 177.91715 65.13136) (xy 177.91715 65.073101) + (xy 178.116651 65.073101) (xy 178.116651 65.154682) (xy 178.123058 65.225203) (xy 178.12306 65.225209) + (xy 178.173629 65.387492) (xy 178.173632 65.3875) (xy 178.261574 65.532972) (xy 178.381777 65.653175) + (xy 178.527249 65.741117) (xy 178.527257 65.74112) (xy 178.689539 65.791689) (xy 178.689545 65.791691) + (xy 178.760075 65.798098) (xy 178.76665 65.798098) (xy 178.76665 65.073101) (xy 179.26665 65.073101) + (xy 179.26665 65.798098) (xy 179.266651 65.798099) (xy 179.273216 65.798099) (xy 179.273232 65.798098) + (xy 179.343753 65.791691) (xy 179.343759 65.791689) (xy 179.506042 65.74112) (xy 179.50605 65.741117) + (xy 179.651522 65.653175) (xy 179.771725 65.532972) (xy 179.859667 65.3875) (xy 179.85967 65.387492) + (xy 179.910239 65.22521) (xy 179.910241 65.225204) (xy 179.916649 65.154681) (xy 179.91665 65.154668) + (xy 179.91665 65.073101) (xy 179.916649 65.0731) (xy 179.266651 65.0731) (xy 179.26665 65.073101) + (xy 178.76665 65.073101) (xy 178.766649 65.0731) (xy 178.116652 65.0731) (xy 178.116651 65.073101) + (xy 177.91715 65.073101) (xy 177.91715 64.667867) (xy 177.936057 64.609676) (xy 177.946134 64.597876) + (xy 177.97378 64.57023) (xy 178.028293 64.542456) (xy 178.088725 64.552027) (xy 178.113784 64.570233) + (xy 178.116651 64.5731) (xy 178.766649 64.5731) (xy 178.76665 64.573099) (xy 178.76665 63.848101) + (xy 179.26665 63.848101) (xy 179.26665 64.573099) (xy 179.266651 64.5731) (xy 179.916648 64.5731) + (xy 179.916649 64.573099) (xy 179.916649 64.491533) (xy 179.916648 64.491517) (xy 179.910241 64.420996) + (xy 179.910239 64.42099) (xy 179.85967 64.258707) (xy 179.859667 64.258699) (xy 179.771725 64.113227) + (xy 179.651522 63.993024) (xy 179.50605 63.905082) (xy 179.506042 63.905079) (xy 179.34376 63.85451) + (xy 179.343754 63.854508) (xy 179.273231 63.8481) (xy 179.266651 63.8481) (xy 179.26665 63.848101) + (xy 178.76665 63.848101) (xy 178.76665 63.818368) (xy 178.769118 63.81077) (xy 178.767869 63.802881) + (xy 178.778393 63.782225) (xy 178.785557 63.760177) (xy 178.79564 63.74837) (xy 179.891415 62.652596) + (xy 179.945932 62.624819) (xy 179.961419 62.6236) (xy 181.318028 62.6236) (xy 181.376219 62.642507) + (xy 181.408592 62.682612) (xy 181.414444 62.695865) (xy 181.493885 62.775306) (xy 181.596659 62.820685) + (xy 181.621785 62.8236) (xy 182.834457 62.823599) (xy 182.892648 62.842506) (xy 182.928612 62.892006) + (xy 182.929526 62.950218) (xy 182.894551 63.070603) (xy 182.894549 63.070613) (xy 182.894354 63.0731) + (xy 183.879149 63.0731) (xy 183.87915 63.073099) (xy 183.87915 62.523101) (xy 184.37915 62.523101) + (xy 184.37915 63.073099) (xy 184.379151 63.0731) (xy 185.363945 63.0731) (xy 185.36375 63.070613) + (xy 185.363748 63.070606) (xy 185.31793 62.912899) (xy 185.31793 62.912898) (xy 185.234335 62.771547) + (xy 185.118202 62.655414) (xy 184.97685 62.571819) (xy 184.819139 62.525999) (xy 184.782287 62.5231) + (xy 184.379151 62.5231) (xy 184.37915 62.523101) (xy 183.87915 62.523101) (xy 183.879149 62.5231) + (xy 183.476013 62.5231) (xy 183.43916 62.525999) (xy 183.281448 62.571819) (xy 183.280453 62.57225) + (xy 183.279732 62.572318) (xy 183.275471 62.573556) (xy 183.275234 62.572742) (xy 183.219538 62.577998) + (xy 183.166878 62.546845) (xy 183.142587 62.490688) (xy 183.142149 62.481402) (xy 183.142149 62.178236) + (xy 183.139235 62.153109) (xy 183.093856 62.050335) (xy 183.014415 61.970894) (xy 182.911641 61.925515) + (xy 182.91164 61.925514) (xy 182.911638 61.925514) (xy 182.886518 61.9226) (xy 181.621789 61.9226) + (xy 181.621786 61.922601) (xy 181.596659 61.925514) (xy 181.493885 61.970894) (xy 181.414443 62.050336) + (xy 181.410675 62.05887) (xy 181.408814 62.063087) (xy 181.408593 62.063587) (xy 181.367793 62.109183) + (xy 181.318028 62.1226) (xy 179.766821 62.1226) (xy 179.674755 62.160734) (xy 177.666884 64.168604) + (xy 177.612367 64.196381) (xy 177.59688 64.1976) (xy 177.13339 64.1976) (xy 177.100247 64.202429) + (xy 177.065254 64.207527) (xy 176.960168 64.258901) (xy 176.877451 64.341618) (xy 176.826077 64.446704) + (xy 176.822159 64.473599) (xy 176.81615 64.51484) (xy 176.81615 65.13136) (xy 176.821475 65.167907) + (xy 176.826077 65.199495) (xy 176.844418 65.237011) (xy 176.877452 65.304583) (xy 176.960167 65.387298) + (xy 177.034443 65.423609) (xy 177.06063 65.436411) (xy 177.104604 65.478954) (xy 177.11615 65.525352) + (xy 177.11615 69.197928) (xy 177.154284 69.289994) (xy 177.154285 69.289995) (xy 177.154286 69.289997) + (xy 177.712155 69.847866) (xy 177.739931 69.902381) (xy 177.74115 69.917868) (xy 177.74115 70.38136) + (xy 177.747377 70.4241) (xy 177.751077 70.449495) (xy 177.794882 70.539099) (xy 177.802452 70.554583) + (xy 177.885167 70.637298) (xy 177.938935 70.663583) (xy 177.990254 70.688672) (xy 177.990255 70.688672) + (xy 177.990257 70.688673) (xy 178.05839 70.6986) (xy 178.417582 70.6986) (xy 178.475773 70.717507) + (xy 178.511737 70.767007) (xy 178.511737 70.828193) (xy 178.487586 70.867603) (xy 177.80679 71.548399) + (xy 177.216885 72.138304) (xy 177.162368 72.166081) (xy 177.146881 72.1673) (xy 158.199418 72.1673) + (xy 158.141227 72.148393) (xy 158.105263 72.098893) (xy 158.105263 72.037707) (xy 158.129412 71.998298) + (xy 162.054608 68.073101) (xy 166.791651 68.073101) (xy 166.791651 68.873086) (xy 166.802142 68.975787) + (xy 166.802145 68.975799) (xy 166.857293 69.142224) (xy 166.94933 69.29144) (xy 167.073309 69.415419) + (xy 167.222525 69.507456) (xy 167.388956 69.562606) (xy 167.491662 69.573099) (xy 167.941648 69.573099) + (xy 167.94165 69.573098) (xy 167.94165 68.073101) (xy 168.44165 68.073101) (xy 168.44165 69.573098) + (xy 168.441651 69.573099) (xy 168.891636 69.573099) (xy 168.994337 69.562607) (xy 168.994349 69.562604) + (xy 169.160774 69.507456) (xy 169.30999 69.415419) (xy 169.433969 69.29144) (xy 169.526006 69.142224) + (xy 169.581156 68.975793) (xy 169.59165 68.873087) (xy 169.59165 68.073101) (xy 169.591649 68.0731) + (xy 168.441651 68.0731) (xy 168.44165 68.073101) (xy 167.94165 68.073101) (xy 167.941649 68.0731) + (xy 166.791652 68.0731) (xy 166.791651 68.073101) (xy 162.054608 68.073101) (xy 163.354597 66.773112) + (xy 166.79165 66.773112) (xy 166.79165 67.573099) (xy 166.791651 67.5731) (xy 167.941649 67.5731) + (xy 167.94165 67.573099) (xy 167.94165 66.073101) (xy 168.44165 66.073101) (xy 168.44165 67.573099) + (xy 168.441651 67.5731) (xy 169.591648 67.5731) (xy 169.591649 67.573099) (xy 169.591649 66.773113) + (xy 169.581157 66.670412) (xy 169.581154 66.6704) (xy 169.526006 66.503975) (xy 169.433969 66.354759) + (xy 169.30999 66.23078) (xy 169.160774 66.138743) (xy 168.994343 66.083593) (xy 168.891637 66.0731) + (xy 168.441651 66.0731) (xy 168.44165 66.073101) (xy 167.94165 66.073101) (xy 167.941649 66.0731) + (xy 167.491663 66.0731) (xy 167.388962 66.083592) (xy 167.38895 66.083595) (xy 167.222525 66.138743) + (xy 167.073309 66.23078) (xy 166.94933 66.354759) (xy 166.857293 66.503975) (xy 166.802143 66.670406) + (xy 166.79165 66.773112) (xy 163.354597 66.773112) (xy 164.250714 65.876995) (xy 164.305231 65.849219) + (xy 164.320718 65.848) (xy 169.403341 65.848) (xy 169.461532 65.866907) (xy 169.473338 65.87699) + (xy 169.554337 65.957989) (xy 169.554339 65.95799) (xy 169.554341 65.957992) (xy 169.65706 66.017297) + (xy 169.657061 66.017297) (xy 169.657064 66.017299) (xy 169.771641 66.048) (xy 169.771643 66.048) + (xy 169.890257 66.048) (xy 169.890259 66.048) (xy 170.004836 66.017299) (xy 170.004838 66.017297) + (xy 170.00484 66.017297) (xy 170.107558 65.957992) (xy 170.107558 65.957991) (xy 170.107563 65.957989) + (xy 170.191439 65.874113) (xy 170.191442 65.874108) (xy 170.250747 65.77139) (xy 170.250747 65.771388) + (xy 170.250749 65.771386) (xy 170.28145 65.656809) (xy 170.28145 65.538191) (xy 170.250749 65.423614) + (xy 170.250747 65.423611) (xy 170.250747 65.423609) (xy 170.191442 65.320891) (xy 170.19144 65.320889) + (xy 170.191439 65.320887) (xy 170.107563 65.237011) (xy 170.10756 65.237009) (xy 170.107558 65.237007) + (xy 170.004839 65.177702) (xy 170.00484 65.177702) (xy 169.991301 65.174074) (xy 169.890259 65.147) + (xy 169.771641 65.147) (xy 169.723905 65.159791) (xy 169.657059 65.177702) (xy 169.554341 65.237007) + (xy 169.55434 65.237008) (xy 169.554337 65.23701) (xy 169.554337 65.237011) (xy 169.473342 65.318005) + (xy 169.418828 65.345781) (xy 169.403341 65.347) (xy 169.107979 65.347) (xy 169.049788 65.328093) + (xy 169.013824 65.278593) (xy 169.013824 65.217407) (xy 169.049788 65.167907) (xy 169.063033 65.159791) + (xy 169.079992 65.15115) (xy 169.1697 65.061442) (xy 169.227296 64.948404) (xy 169.24215 64.854619) + (xy 169.242149 62.791582) (xy 169.242149 62.791581) (xy 169.242149 62.791578) (xy 169.242148 62.791576) + (xy 169.227297 62.6978) (xy 169.227296 62.697798) (xy 169.227296 62.697796) (xy 169.1697 62.584758) + (xy 169.164143 62.579201) (xy 169.136368 62.524687) (xy 169.145939 62.464255) (xy 169.189204 62.42099) + (xy 169.234149 62.4102) (xy 170.994118 62.4102) (xy 170.994119 62.4102) (xy 171.119794 62.385201) + (xy 171.238177 62.336165) (xy 171.257473 62.323272) (xy 171.344719 62.264977) (xy 172.707604 60.902091) + (xy 181.24295 60.902091) (xy 181.24295 61.020709) (xy 181.261973 61.091704) (xy 181.273652 61.13529) + (xy 181.332957 61.238008) (xy 181.332959 61.23801) (xy 181.332961 61.238013) (xy 181.416837 61.321889) + (xy 181.416839 61.32189) (xy 181.416841 61.321892) (xy 181.51956 61.381197) (xy 181.519561 61.381197) + (xy 181.519564 61.381199) (xy 181.634141 61.4119) (xy 181.634143 61.4119) (xy 181.752757 61.4119) + (xy 181.752759 61.4119) (xy 181.867336 61.381199) (xy 181.867338 61.381197) (xy 181.86734 61.381197) + (xy 181.970058 61.321892) (xy 181.970058 61.321891) (xy 181.970063 61.321889) (xy 182.053939 61.238013) + (xy 182.063987 61.220609) (xy 182.113247 61.13529) (xy 182.113247 61.135288) (xy 182.113249 61.135286) + (xy 182.14395 61.020709) (xy 182.14395 60.902091) (xy 182.113249 60.787514) (xy 182.113247 60.787511) + (xy 182.113247 60.787509) (xy 182.053942 60.684791) (xy 182.05394 60.684789) (xy 182.053939 60.684787) + (xy 181.970063 60.600911) (xy 181.97006 60.600909) (xy 181.970058 60.600907) (xy 181.867339 60.541602) + (xy 181.86734 60.541602) (xy 181.851852 60.537452) (xy 181.752759 60.5109) (xy 181.634141 60.5109) + (xy 181.577034 60.526202) (xy 181.519559 60.541602) (xy 181.416841 60.600907) (xy 181.332957 60.684791) + (xy 181.273652 60.787509) (xy 181.258909 60.842532) (xy 181.24295 60.902091) (xy 172.707604 60.902091) + (xy 173.662195 59.947499) (xy 173.688715 59.928566) (xy 173.773133 59.887298) (xy 173.855848 59.804583) + (xy 173.907223 59.699493) (xy 173.907223 59.699491) (xy 173.909493 59.692146) (xy 173.91074 59.692531) + (xy 173.92236 59.662288) (xy 173.927443 59.654681) (xy 173.943115 59.631227) (xy 173.992151 59.512843) + (xy 174.01715 59.387169) (xy 174.01715 59.259031) (xy 173.992151 59.133356) (xy 173.943115 59.014973) + (xy 173.922359 58.983909) (xy 173.913532 58.96756) (xy 173.908548 58.955809) (xy 173.907223 58.946707) + (xy 173.888099 58.907588) (xy 173.887066 58.905152) (xy 173.884629 58.877196) (xy 173.880697 58.849399) + (xy 173.881994 58.846953) (xy 173.881754 58.844198) (xy 173.896216 58.820146) (xy 173.909372 58.795349) + (xy 173.911857 58.794133) (xy 173.913284 58.791762) (xy 173.939124 58.780803) (xy 173.964341 58.768476) + (xy 173.968961 58.76815) (xy 173.969614 58.767874) (xy 173.970379 58.768051) (xy 173.978209 58.7675) + (xy 174.40509 58.7675) (xy 174.463281 58.786407) (xy 174.499245 58.835907) (xy 174.499245 58.897093) + (xy 174.494031 58.90998) (xy 174.476077 58.946704) (xy 174.473817 58.962219) (xy 174.46615 59.01484) + (xy 174.46615 59.63136) (xy 174.46864 59.648447) (xy 174.469307 59.653027) (xy 174.458986 59.713336) + (xy 174.415188 59.75606) (xy 174.371341 59.7663) (xy 174.301441 59.7663) (xy 174.231317 59.785089) + (xy 174.186859 59.797002) (xy 174.084141 59.856307) (xy 174.000257 59.940191) (xy 173.940952 60.042909) + (xy 173.925592 60.100235) (xy 173.91025 60.157491) (xy 173.91025 60.276109) (xy 173.931257 60.354508) + (xy 173.940952 60.39069) (xy 174.000257 60.493408) (xy 174.000259 60.49341) (xy 174.000261 60.493413) + (xy 174.084137 60.577289) (xy 174.084139 60.57729) (xy 174.084141 60.577292) (xy 174.18686 60.636597) + (xy 174.186861 60.636597) (xy 174.186864 60.636599) (xy 174.301441 60.6673) (xy 174.301443 60.6673) + (xy 174.420057 60.6673) (xy 174.420059 60.6673) (xy 174.534636 60.636599) (xy 174.534638 60.636597) + (xy 174.53464 60.636597) (xy 174.637358 60.577292) (xy 174.637358 60.577291) (xy 174.637363 60.577289) + (xy 174.721239 60.493413) (xy 174.743883 60.454193) (xy 174.780547 60.39069) (xy 174.780547 60.390688) + (xy 174.780549 60.390686) (xy 174.81125 60.276109) (xy 174.81125 60.161566) (xy 174.813718 60.153968) + (xy 174.812469 60.146079) (xy 174.822992 60.125425) (xy 174.830157 60.103375) (xy 174.840247 60.091562) + (xy 174.954214 59.977596) (xy 175.00873 59.949819) (xy 175.024217 59.9486) (xy 175.249907 59.9486) + (xy 175.24991 59.9486) (xy 175.318043 59.938673) (xy 175.423133 59.887298) (xy 175.505848 59.804583) + (xy 175.557223 59.699493) (xy 175.562644 59.662288) (xy 175.563222 59.658325) (xy 175.590322 59.603469) + (xy 175.64449 59.575018) (xy 175.661187 59.5736) (xy 176.722113 59.5736) (xy 176.780304 59.592507) + (xy 176.816268 59.642007) (xy 176.820078 59.658325) (xy 176.826076 59.699492) (xy 176.858737 59.7663) + (xy 176.877452 59.804583) (xy 176.960167 59.887298) (xy 176.993704 59.903693) (xy 177.065254 59.938672) + (xy 177.065255 59.938672) (xy 177.065257 59.938673) (xy 177.13339 59.9486) (xy 177.133393 59.9486) + (xy 177.599907 59.9486) (xy 177.59991 59.9486) (xy 177.668043 59.938673) (xy 177.773133 59.887298) + (xy 177.855848 59.804583) (xy 177.907223 59.699493) (xy 177.91715 59.63136) (xy 177.91715 59.573101) + (xy 178.116651 59.573101) (xy 178.116651 59.654682) (xy 178.123058 59.725203) (xy 178.12306 59.725209) + (xy 178.173629 59.887492) (xy 178.173632 59.8875) (xy 178.261574 60.032972) (xy 178.381777 60.153175) + (xy 178.527249 60.241117) (xy 178.527257 60.24112) (xy 178.689539 60.291689) (xy 178.689545 60.291691) + (xy 178.760075 60.298098) (xy 178.76665 60.298098) (xy 178.76665 59.573101) (xy 179.26665 59.573101) + (xy 179.26665 60.298098) (xy 179.266651 60.298099) (xy 179.273216 60.298099) (xy 179.273232 60.298098) + (xy 179.343753 60.291691) (xy 179.343759 60.291689) (xy 179.506042 60.24112) (xy 179.50605 60.241117) + (xy 179.651522 60.153175) (xy 179.771725 60.032972) (xy 179.859667 59.8875) (xy 179.85967 59.887492) + (xy 179.910239 59.72521) (xy 179.910241 59.725204) (xy 179.916649 59.654681) (xy 179.91665 59.654668) + (xy 179.91665 59.573101) (xy 179.916649 59.5731) (xy 179.266651 59.5731) (xy 179.26665 59.573101) + (xy 178.76665 59.573101) (xy 178.766649 59.5731) (xy 178.116652 59.5731) (xy 178.116651 59.573101) + (xy 177.91715 59.573101) (xy 177.91715 59.01484) (xy 177.907223 58.946707) (xy 177.907222 58.946704) + (xy 177.889269 58.90998) (xy 177.888265 58.902888) (xy 177.884055 58.897093) (xy 177.884055 58.873126) + (xy 177.880698 58.849398) (xy 177.884055 58.84307) (xy 177.884055 58.835907) (xy 177.898143 58.816516) + (xy 177.909374 58.795348) (xy 177.915808 58.792202) (xy 177.920019 58.786407) (xy 177.942812 58.779001) + (xy 177.964342 58.768476) (xy 177.97821 58.7675) (xy 178.036345 58.7675) (xy 178.094536 58.786407) + (xy 178.1305 58.835907) (xy 178.130862 58.895953) (xy 178.12306 58.920989) (xy 178.123058 58.920995) + (xy 178.11665 58.991518) (xy 178.11665 59.073099) (xy 178.116651 59.0731) (xy 179.916648 59.0731) + (xy 179.916649 59.073099) (xy 179.916649 58.991533) (xy 179.916648 58.991517) (xy 179.910241 58.920996) + (xy 179.910239 58.92099) (xy 179.902438 58.895953) (xy 179.903177 58.834772) (xy 179.939736 58.78571) + (xy 179.996955 58.7675) (xy 188.120103 58.7675) (xy 188.178294 58.786407) (xy 188.214256 58.835904) + (xy 188.216951 58.844198) (xy 188.21794 58.847242) (xy 188.300152 59.008591) (xy 188.300154 59.008594) + (xy 188.406597 59.155101) (xy 188.534649 59.283153) (xy 188.681156 59.389596) (xy 188.842511 59.471811) + (xy 189.014741 59.527771) (xy 189.123271 59.54496) (xy 189.177783 59.572733) (xy 193.565886 63.960835) + (xy 193.691315 64.086264) (xy 193.838803 64.184813) (xy 193.869672 64.197599) (xy 193.869673 64.1976) + (xy 193.869674 64.1976) (xy 194.002684 64.252695) (xy 194.176659 64.2873) (xy 194.17666 64.2873) + (xy 199.866641 64.2873) (xy 199.866642 64.2873) (xy 200.040616 64.252695) (xy 200.148211 64.208127) + (xy 200.204497 64.184813) (xy 200.204499 64.184811) (xy 200.204504 64.184809) (xy 200.305922 64.117043) + (xy 200.305923 64.117042) (xy 200.308943 64.115024) (xy 200.351986 64.086264) (xy 202.041114 62.397135) + (xy 202.139663 62.249646) (xy 202.207545 62.085766) (xy 202.24215 61.911792) (xy 202.24215 61.734408) + (xy 202.207545 61.560434) (xy 202.139663 61.396553) (xy 202.139661 61.396551) (xy 202.139659 61.396545) + (xy 202.079484 61.306489) (xy 202.041114 61.249064) (xy 201.915686 61.123636) (xy 201.87262 61.09486) + (xy 201.768204 61.02509) (xy 201.768195 61.025086) (xy 201.604314 60.957204) (xy 201.430344 60.9226) + (xy 201.430342 60.9226) (xy 201.252958 60.9226) (xy 201.252955 60.9226) (xy 201.078985 60.957204) + (xy 200.915104 61.025086) (xy 200.767616 61.123635) (xy 199.433946 62.457304) (xy 199.379429 62.485081) + (xy 199.363942 62.4863) (xy 198.702323 62.4863) (xy 198.644132 62.467393) (xy 198.608168 62.417893) + (xy 198.608168 62.356707) (xy 198.613382 62.34382) (xy 198.623427 62.323272) (xy 198.631516 62.306725) + (xy 198.64215 62.233736) (xy 198.64215 61.653223) (xy 198.661057 61.595032) (xy 198.671146 61.583219) + (xy 201.54987 58.704496) (xy 201.604387 58.676719) (xy 201.619874 58.6755) (xy 202.894877 58.6755) + (xy 202.953068 58.694407) (xy 202.964881 58.704496) (xy 204.095504 59.835119) (xy 204.123281 59.889636) + (xy 204.1245 59.905123) (xy 204.1245 62.594876) (xy 204.105593 62.653067) (xy 204.095504 62.66488) + (xy 196.564881 70.195504) (xy 196.510364 70.223281) (xy 196.494877 70.2245) (xy 186.855124 70.2245) + (xy 186.796933 70.205593) (xy 186.78512 70.195504) (xy 182.558646 65.96903) (xy 182.541333 65.93505) + (xy 188.13365 65.93505) (xy 188.13365 66.116149) (xy 188.161978 66.295006) (xy 188.181392 66.354759) + (xy 188.217939 66.467239) (xy 188.300154 66.628594) (xy 188.406597 66.775101) (xy 188.534649 66.903153) + (xy 188.681156 67.009596) (xy 188.842511 67.091811) (xy 189.014741 67.147771) (xy 189.086286 67.159102) + (xy 189.193601 67.1761) (xy 189.193604 67.1761) (xy 189.374699 67.1761) (xy 189.464127 67.161935) + (xy 189.553559 67.147771) (xy 189.725789 67.091811) (xy 189.887144 67.009596) (xy 190.033651 66.903153) + (xy 190.161703 66.775101) (xy 190.268146 66.628594) (xy 190.350361 66.467239) (xy 190.406321 66.295009) + (xy 190.43465 66.116146) (xy 190.43465 65.935054) (xy 190.43465 65.93505) (xy 193.21365 65.93505) + (xy 193.21365 66.116149) (xy 193.241978 66.295006) (xy 193.261392 66.354759) (xy 193.297939 66.467239) + (xy 193.380154 66.628594) (xy 193.486597 66.775101) (xy 193.614649 66.903153) (xy 193.761156 67.009596) + (xy 193.922511 67.091811) (xy 194.094741 67.147771) (xy 194.166286 67.159102) (xy 194.273601 67.1761) + (xy 194.273604 67.1761) (xy 194.454699 67.1761) (xy 194.544127 67.161935) (xy 194.633559 67.147771) + (xy 194.805789 67.091811) (xy 194.967144 67.009596) (xy 195.113651 66.903153) (xy 195.241703 66.775101) + (xy 195.348146 66.628594) (xy 195.430361 66.467239) (xy 195.486321 66.295009) (xy 195.51465 66.116146) + (xy 195.51465 65.935054) (xy 195.51465 65.93505) (xy 195.494095 65.805277) (xy 195.486321 65.756191) + (xy 195.430361 65.583961) (xy 195.348146 65.422606) (xy 195.241703 65.276099) (xy 195.113651 65.148047) + (xy 194.967144 65.041604) (xy 194.967143 65.041603) (xy 194.967141 65.041602) (xy 194.805787 64.959388) + (xy 194.633556 64.903428) (xy 194.454699 64.8751) (xy 194.454696 64.8751) (xy 194.273604 64.8751) + (xy 194.273601 64.8751) (xy 194.094743 64.903428) (xy 193.922512 64.959388) (xy 193.761158 65.041602) + (xy 193.733851 65.061442) (xy 193.614649 65.148047) (xy 193.486597 65.276099) (xy 193.444538 65.333989) + (xy 193.380152 65.422608) (xy 193.297938 65.583962) (xy 193.241978 65.756193) (xy 193.21365 65.93505) + (xy 190.43465 65.93505) (xy 190.414095 65.805277) (xy 190.406321 65.756191) (xy 190.350361 65.583961) + (xy 190.268146 65.422606) (xy 190.161703 65.276099) (xy 190.033651 65.148047) (xy 189.887144 65.041604) + (xy 189.887143 65.041603) (xy 189.887141 65.041602) (xy 189.725787 64.959388) (xy 189.553556 64.903428) + (xy 189.374699 64.8751) (xy 189.374696 64.8751) (xy 189.193604 64.8751) (xy 189.193601 64.8751) + (xy 189.014743 64.903428) (xy 188.842512 64.959388) (xy 188.681158 65.041602) (xy 188.653851 65.061442) + (xy 188.534649 65.148047) (xy 188.406597 65.276099) (xy 188.364538 65.333989) (xy 188.300152 65.422608) + (xy 188.217938 65.583962) (xy 188.161978 65.756193) (xy 188.13365 65.93505) (xy 182.541333 65.93505) + (xy 182.530869 65.914513) (xy 182.52965 65.899026) (xy 182.52965 64.822599) (xy 182.548557 64.764408) + (xy 182.598057 64.728444) (xy 182.62865 64.723599) (xy 182.886511 64.723599) (xy 182.886514 64.723599) + (xy 182.911641 64.720685) (xy 183.014415 64.675306) (xy 183.093856 64.595865) (xy 183.139235 64.493091) + (xy 183.14215 64.467965) (xy 183.142149 64.164812) (xy 183.161056 64.106623) (xy 183.210556 64.070659) + (xy 183.271741 64.070658) (xy 183.280464 64.073954) (xy 183.281452 64.074381) (xy 183.43916 64.1202) + (xy 183.476013 64.1231) (xy 183.879149 64.1231) (xy 183.87915 64.123099) (xy 183.87915 63.573101) + (xy 184.37915 63.573101) (xy 184.37915 64.123099) (xy 184.379151 64.1231) (xy 184.782287 64.1231) + (xy 184.819139 64.1202) (xy 184.97685 64.07438) (xy 184.976851 64.07438) (xy 185.118202 63.990785) + (xy 185.234335 63.874652) (xy 185.31793 63.733301) (xy 185.31793 63.7333) (xy 185.363748 63.575593) + (xy 185.36375 63.575586) (xy 185.363946 63.5731) (xy 184.379151 63.5731) (xy 184.37915 63.573101) + (xy 183.87915 63.573101) (xy 183.879149 63.5731) (xy 182.894354 63.5731) (xy 182.894549 63.575586) + (xy 182.894551 63.575593) (xy 182.929526 63.69598) (xy 182.927604 63.757135) (xy 182.890103 63.805481) + (xy 182.834457 63.8226) (xy 181.621789 63.8226) (xy 181.621786 63.822601) (xy 181.596659 63.825514) + (xy 181.493885 63.870894) (xy 181.414444 63.950335) (xy 181.369064 64.053111) (xy 181.36615 64.07823) + (xy 181.36615 64.46796) (xy 181.366151 64.467963) (xy 181.369064 64.49309) (xy 181.380905 64.519907) + (xy 181.414444 64.595865) (xy 181.493885 64.675306) (xy 181.596659 64.720685) (xy 181.621785 64.7236) + (xy 181.87965 64.723599) (xy 181.93784 64.742506) (xy 181.973804 64.792006) (xy 181.97865 64.822599) + (xy 181.97865 66.10895) (xy 182.020593 66.210208) (xy 186.543941 70.733557) (xy 186.571083 70.744799) + (xy 186.571086 70.744802) (xy 186.571087 70.744801) (xy 186.6452 70.7755) (xy 186.645201 70.7755) + (xy 196.704799 70.7755) (xy 196.7048 70.7755) (xy 196.806058 70.733557) (xy 196.883557 70.656058) + (xy 196.883556 70.656058) (xy 204.633557 62.906059) (xy 204.657438 62.848404) (xy 204.6755 62.8048) + (xy 204.6755 59.6952) (xy 204.633557 59.593942) (xy 204.633557 59.593941) (xy 203.206058 58.166443) + (xy 203.1048 58.1245) (xy 201.40995 58.1245) (xy 201.3537 58.1478) (xy 201.353699 58.1478) (xy 201.308693 58.166441) + (xy 198.424908 61.050225) (xy 198.370391 61.078002) (xy 198.340633 61.078186) (xy 198.302286 61.0726) + (xy 197.781014 61.0726) (xy 197.73722 61.07898) (xy 197.708023 61.083234) (xy 197.595434 61.138276) + (xy 197.59326 61.140451) (xy 197.590216 61.142001) (xy 197.588759 61.143042) (xy 197.588603 61.142823) + (xy 197.538742 61.168225) (xy 197.47831 61.15865) (xy 197.453257 61.140447) (xy 195.38998 59.077169) + (xy 195.362203 59.022652) (xy 195.371773 58.962222) (xy 195.430361 58.847239) (xy 195.486321 58.675009) + (xy 195.51465 58.496146) (xy 195.51465 58.315054) (xy 195.51465 58.31505) (xy 195.491146 58.166654) + (xy 195.486321 58.136191) (xy 195.430361 57.963961) (xy 195.348146 57.802606) (xy 195.241703 57.656099) + (xy 195.113651 57.528047) (xy 194.967144 57.421604) (xy 194.967143 57.421603) (xy 194.967141 57.421602) + (xy 194.805787 57.339388) (xy 194.633556 57.283428) (xy 194.454699 57.2551) (xy 194.454696 57.2551) + (xy 194.273604 57.2551) (xy 194.273601 57.2551) (xy 194.094743 57.283428) (xy 193.922512 57.339388) + (xy 193.761158 57.421602) (xy 193.738079 57.43837) (xy 193.614649 57.528047) (xy 193.486597 57.656099) + (xy 193.43632 57.7253) (xy 193.380152 57.802608) (xy 193.297938 57.963962) (xy 193.241978 58.136193) + (xy 193.21365 58.31505) (xy 193.21365 58.496149) (xy 193.241978 58.675006) (xy 193.297938 58.847237) + (xy 193.377911 59.004193) (xy 193.380154 59.008594) (xy 193.486597 59.155101) (xy 193.614649 59.283153) + (xy 193.761156 59.389596) (xy 193.922511 59.471811) (xy 194.094741 59.527771) (xy 194.166286 59.539102) + (xy 194.273601 59.5561) (xy 194.273604 59.5561) (xy 194.454699 59.5561) (xy 194.544127 59.541935) + (xy 194.633559 59.527771) (xy 194.805789 59.471811) (xy 194.92077 59.413224) (xy 194.981201 59.403653) + (xy 195.035718 59.43143) (xy 195.035719 59.43143) (xy 197.412154 61.807864) (xy 197.439931 61.862381) + (xy 197.44115 61.877868) (xy 197.44115 62.233736) (xy 197.448667 62.285331) (xy 197.451784 62.306726) + (xy 197.451785 62.306728) (xy 197.469918 62.34382) (xy 197.478489 62.404402) (xy 197.449813 62.458452) + (xy 197.394845 62.485324) (xy 197.380977 62.4863) (xy 194.679357 62.4863) (xy 194.621166 62.467393) + (xy 194.609353 62.457304) (xy 192.536456 60.384407) (xy 190.451284 58.299234) (xy 190.42351 58.244722) + (xy 190.406321 58.136191) (xy 190.350361 57.963961) (xy 190.268146 57.802606) (xy 190.161703 57.656099) + (xy 190.033651 57.528047) (xy 189.887144 57.421604) (xy 189.887143 57.421603) (xy 189.887141 57.421602) + (xy 189.725787 57.339388) (xy 189.553556 57.283428) (xy 189.445028 57.266239) (xy 189.390513 57.238463) + (xy 189.337151 57.185101) (xy 189.309376 57.130587) (xy 189.318947 57.070155) (xy 189.362212 57.02689) + (xy 189.407157 57.0161) (xy 190.298969 57.0161) (xy 190.29897 57.0161) (xy 190.298971 57.016099) + (xy 190.298977 57.016099) (xy 190.320773 57.011762) (xy 190.342872 57.007367) (xy 190.392654 56.974104) + (xy 190.425917 56.924322) (xy 190.433613 56.885635) (xy 190.434649 56.880427) (xy 190.43465 56.880418) + (xy 190.43465 55.77505) (xy 193.21365 55.77505) (xy 193.21365 55.956149) (xy 193.241978 56.135006) + (xy 193.297938 56.307237) (xy 193.379864 56.468026) (xy 193.380154 56.468594) (xy 193.486597 56.615101) + (xy 193.614649 56.743153) (xy 193.761156 56.849596) (xy 193.922511 56.931811) (xy 194.094741 56.987771) + (xy 194.166286 56.999102) (xy 194.273601 57.0161) (xy 194.273604 57.0161) (xy 194.454699 57.0161) + (xy 194.549365 57.001106) (xy 194.633559 56.987771) (xy 194.729706 56.956531) (xy 194.751797 56.949354) + (xy 194.765646 56.944854) (xy 194.805789 56.931811) (xy 194.967144 56.849596) (xy 195.113651 56.743153) + (xy 195.241703 56.615101) (xy 195.272219 56.573099) (xy 208.739418 56.573099) (xy 208.739419 56.5731) + (xy 209.787504 56.5731) (xy 209.74902 56.639757) (xy 209.71665 56.760565) (xy 209.71665 56.885635) + (xy 209.74902 57.006443) (xy 209.787504 57.0731) (xy 208.739419 57.0731) (xy 208.749891 57.139222) + (xy 208.815554 57.341315) (xy 208.912025 57.530652) (xy 209.036927 57.702564) (xy 209.187185 57.852822) + (xy 209.359097 57.977724) (xy 209.548434 58.074195) (xy 209.750528 58.139859) (xy 209.835556 58.153326) + (xy 209.890072 58.181103) (xy 209.91785 58.23562) (xy 209.908279 58.296052) (xy 209.865014 58.339317) + (xy 209.839384 58.348205) (xy 209.774813 58.361049) (xy 209.592736 58.436467) (xy 209.428868 58.545961) + (xy 209.428864 58.545964) (xy 209.289514 58.685314) (xy 209.289511 58.685318) (xy 209.180017 58.849186) + (xy 209.104599 59.031263) (xy 209.104599 59.031265) (xy 209.06615 59.224556) (xy 209.06615 59.421643) + (xy 209.087261 59.527771) (xy 209.098797 59.585769) (xy 209.104599 59.614934) (xy 209.104599 59.614936) + (xy 209.180017 59.797013) (xy 209.180018 59.797014) (xy 209.289511 59.960882) (xy 209.428868 60.100239) + (xy 209.592736 60.209732) (xy 209.774815 60.285151) (xy 209.968109 60.3236) (xy 209.96811 60.3236) + (xy 210.41519 60.3236) (xy 210.415191 60.3236) (xy 210.608485 60.285151) (xy 210.790564 60.209732) + (xy 210.954432 60.100239) (xy 211.093789 59.960882) (xy 211.203282 59.797014) (xy 211.278701 59.614935) + (xy 211.31715 59.421641) (xy 211.31715 59.224559) (xy 211.278701 59.031265) (xy 211.203282 58.849186) + (xy 211.093789 58.685318) (xy 210.954432 58.545961) (xy 210.790564 58.436468) (xy 210.790565 58.436468) + (xy 210.790563 58.436467) (xy 210.608486 58.361049) (xy 210.543915 58.348205) (xy 210.490531 58.318308) + (xy 210.464916 58.262742) (xy 210.476853 58.202733) (xy 210.521783 58.1612) (xy 210.547743 58.153326) + (xy 210.632771 58.139859) (xy 210.834865 58.074195) (xy 211.024202 57.977724) (xy 211.196114 57.852822) + (xy 211.346372 57.702564) (xy 211.471274 57.530652) (xy 211.567745 57.341315) (xy 211.633408 57.139222) + (xy 211.643881 57.0731) (xy 210.595796 57.0731) (xy 210.63428 57.006443) (xy 210.66665 56.885635) + (xy 210.66665 56.760565) (xy 210.63428 56.639757) (xy 210.595796 56.5731) (xy 211.643881 56.5731) + (xy 211.643881 56.573099) (xy 211.633408 56.506977) (xy 211.567745 56.304884) (xy 211.471274 56.115547) + (xy 211.346372 55.943635) (xy 211.196114 55.793377) (xy 211.024202 55.668475) (xy 210.834865 55.572004) + (xy 210.632772 55.506341) (xy 210.547742 55.492873) (xy 210.493226 55.465095) (xy 210.465449 55.410578) + (xy 210.475021 55.350146) (xy 210.518286 55.306882) (xy 210.543913 55.297995) (xy 210.608485 55.285151) + (xy 210.790564 55.209732) (xy 210.954432 55.100239) (xy 211.093789 54.960882) (xy 211.203282 54.797014) + (xy 211.278701 54.614935) (xy 211.31715 54.421641) (xy 211.31715 54.224559) (xy 211.278701 54.031265) + (xy 211.203282 53.849186) (xy 211.093789 53.685318) (xy 210.954432 53.545961) (xy 210.790564 53.436468) + (xy 210.790565 53.436468) (xy 210.790563 53.436467) (xy 210.608485 53.361049) (xy 210.415193 53.3226) + (xy 210.415191 53.3226) (xy 209.968109 53.3226) (xy 209.968106 53.3226) (xy 209.774815 53.361049) + (xy 209.774813 53.361049) (xy 209.592736 53.436467) (xy 209.428868 53.545961) (xy 209.428864 53.545964) + (xy 209.289514 53.685314) (xy 209.289511 53.685318) (xy 209.180017 53.849186) (xy 209.104599 54.031263) + (xy 209.104599 54.031265) (xy 209.06615 54.224556) (xy 209.06615 54.421643) (xy 209.083594 54.509336) + (xy 209.103469 54.609256) (xy 209.104599 54.614934) (xy 209.104599 54.614936) (xy 209.180017 54.797013) + (xy 209.191251 54.813826) (xy 209.289511 54.960882) (xy 209.428868 55.100239) (xy 209.592736 55.209732) + (xy 209.774815 55.285151) (xy 209.839384 55.297994) (xy 209.892767 55.327891) (xy 209.918383 55.383456) + (xy 209.906446 55.443465) (xy 209.861517 55.484998) (xy 209.835557 55.492873) (xy 209.750527 55.506341) + (xy 209.548434 55.572004) (xy 209.359097 55.668475) (xy 209.187185 55.793377) (xy 209.036927 55.943635) (xy 208.912025 56.115547) (xy 208.815554 56.304884) (xy 208.749891 56.506977) (xy 208.739418 56.573099) - (xy 195.457628 56.573099) (xy 195.476437 56.54721) (xy 195.56937 56.364819) (xy 195.632627 56.170134) - (xy 195.638967 56.130107) (xy 195.66465 55.967955) (xy 195.66465 55.763244) (xy 195.632628 55.56107) - (xy 195.624281 55.53538) (xy 195.56937 55.366381) (xy 195.476437 55.18399) (xy 195.476435 55.183986) - (xy 195.35612 55.018386) (xy 195.356118 55.018384) (xy 195.356116 55.018381) (xy 195.211369 54.873634) - (xy 195.211365 54.873631) (xy 195.211363 54.873629) (xy 195.045763 54.753314) (xy 195.045759 54.753312) - (xy 194.863369 54.66038) (xy 194.668679 54.597121) (xy 194.466505 54.5651) (xy 194.466502 54.5651) - (xy 194.261798 54.5651) (xy 194.261795 54.5651) (xy 194.05962 54.597121) (xy 193.86493 54.66038) - (xy 193.68254 54.753312) (xy 193.682536 54.753314) (xy 193.516936 54.873629) (xy 193.372179 55.018386) - (xy 193.251864 55.183986) (xy 193.251862 55.18399) (xy 193.15893 55.36638) (xy 193.095671 55.56107) - (xy 193.06365 55.763244) (xy 193.06365 55.967955) (xy 193.095671 56.170129) (xy 193.15893 56.364819) - (xy 193.251862 56.547209) (xy 193.251864 56.547213) (xy 193.372179 56.712813) (xy 193.372181 56.712815) - (xy 193.372184 56.712819) (xy 193.516931 56.857566) (xy 193.516934 56.857568) (xy 193.516936 56.85757) - (xy 193.682536 56.977885) (xy 193.68254 56.977887) (xy 193.818947 57.04739) (xy 193.862212 57.090655) - (xy 193.871783 57.151087) (xy 193.844006 57.205604) (xy 193.818947 57.22381) (xy 193.68254 57.293312) - (xy 193.682536 57.293314) (xy 193.516936 57.413629) (xy 193.372179 57.558386) (xy 193.251864 57.723986) - (xy 193.251862 57.72399) (xy 193.15893 57.90638) (xy 193.095671 58.10107) (xy 193.06365 58.303244) - (xy 193.06365 58.507955) (xy 193.095671 58.710129) (xy 193.15893 58.904819) (xy 193.251862 59.087209) - (xy 193.251864 59.087213) (xy 193.372179 59.252813) (xy 193.372181 59.252815) (xy 193.372184 59.252819) - (xy 193.516931 59.397566) (xy 193.516934 59.397568) (xy 193.516936 59.39757) (xy 193.682536 59.517885) - (xy 193.68254 59.517887) (xy 193.864931 59.61082) (xy 194.059616 59.674077) (xy 194.059617 59.674077) - (xy 194.05962 59.674078) (xy 194.261795 59.7061) (xy 194.261798 59.7061) (xy 194.466505 59.7061) - (xy 194.668679 59.674078) (xy 194.66868 59.674077) (xy 194.668684 59.674077) (xy 194.863369 59.61082) - (xy 194.891764 59.596351) (xy 194.952192 59.586778) (xy 195.00671 59.614554) (xy 195.006713 59.614556) - (xy 197.262154 61.869997) (xy 197.289931 61.924514) (xy 197.29115 61.940001) (xy 197.29115 62.2373) - (xy 197.272243 62.295491) (xy 197.222743 62.331455) (xy 197.19215 62.3363) (xy 194.74149 62.3363) - (xy 194.683299 62.317393) (xy 194.671486 62.307304) (xy 190.591815 58.227634) (xy 190.564038 58.173118) - (xy 190.554172 58.110819) (xy 190.552628 58.101071) (xy 190.552627 58.101069) (xy 190.552627 58.101066) - (xy 190.48937 57.906381) (xy 190.396437 57.72399) (xy 190.396435 57.723986) (xy 190.27612 57.558386) - (xy 190.276118 57.558384) (xy 190.276116 57.558381) (xy 190.131369 57.413634) (xy 190.131365 57.413631) - (xy 190.131363 57.413629) (xy 190.037166 57.345192) (xy 190.001202 57.295692) (xy 190.001201 57.234507) - (xy 190.037165 57.185007) (xy 190.095355 57.166099) (xy 190.329011 57.166099) (xy 190.329014 57.166099) - (xy 190.354141 57.163185) (xy 190.456915 57.117806) (xy 190.536356 57.038365) (xy 190.581735 56.935591) - (xy 190.58465 56.910465) (xy 190.584649 54.820736) (xy 190.581735 54.795609) (xy 190.536356 54.692835) - (xy 190.456915 54.613394) (xy 190.354141 54.568015) (xy 190.35414 54.568014) (xy 190.354138 54.568014) - (xy 190.329018 54.5651) (xy 188.239289 54.5651) (xy 188.239286 54.565101) (xy 188.214159 54.568014) - (xy 188.111385 54.613394) (xy 188.031944 54.692835) (xy 187.986564 54.795611) (xy 187.98365 54.82073) - (xy 187.98365 54.820732) (xy 187.98365 54.820735) (xy 187.98365 55.810216) (xy 187.983651 56.7175) - (xy 187.964744 56.775691) (xy 187.915244 56.811655) (xy 187.884651 56.8165) (xy 169.544281 56.8165) - (xy 169.523179 56.820698) (xy 169.341331 56.856869) (xy 169.150152 56.936058) (xy 168.978095 57.051022) - (xy 168.831772 57.197344) (xy 168.831773 57.197345) (xy 167.375673 58.653445) (xy 167.309906 58.751872) - (xy 167.261856 58.789751) (xy 167.200717 58.792153) (xy 167.149844 58.758159) (xy 167.148338 58.756199) - (xy 167.099199 58.690558) (xy 167.099198 58.690557) (xy 167.099196 58.690554) (xy 167.049625 58.653445) - (xy 166.983979 58.604302) (xy 166.849138 58.55401) (xy 166.849133 58.554009) (xy 166.849131 58.554008) - (xy 166.849127 58.554008) (xy 166.817899 58.55065) (xy 166.789523 58.5476) (xy 166.78952 58.5476) - (xy 166.373551 58.5476) (xy 166.31536 58.528693) (xy 166.303548 58.518604) (xy 165.985563 58.20062) - (xy 165.985558 58.200616) (xy 165.894241 58.147894) (xy 165.894243 58.147894) (xy 165.85472 58.137304) - (xy 165.792377 58.1206) (xy 165.792375 58.1206) (xy 162.557535 58.1206) (xy 162.499344 58.101693) - (xy 162.46338 58.052193) (xy 162.46338 57.991007) (xy 162.487529 57.951598) (xy 165.311439 55.127689) - (xy 165.37552 55.031784) (xy 165.423566 54.993908) (xy 165.484704 54.991506) (xy 165.535578 55.025498) - (xy 165.537487 55.028001) (xy 165.594495 55.105244) (xy 165.594497 55.105246) (xy 165.5945 55.10525) - (xy 165.594503 55.105252) (xy 165.594505 55.105254) (xy 165.703766 55.185892) (xy 165.703767 55.185892) - (xy 165.703768 55.185893) (xy 165.831951 55.230746) (xy 165.862375 55.233599) (xy 165.862377 55.2336) - (xy 165.862384 55.2336) (xy 166.046754 55.2336) (xy 166.104945 55.252507) (xy 166.140909 55.302007) - (xy 166.142381 55.358221) (xy 166.14125 55.36244) (xy 166.14125 55.362443) (xy 166.14125 55.520557) - (xy 166.182173 55.673284) (xy 166.26123 55.810216) (xy 166.373034 55.92202) (xy 166.509966 56.001077) - (xy 166.662693 56.042) (xy 166.662695 56.042) (xy 166.820805 56.042) (xy 166.820807 56.042) (xy 166.973534 56.001077) - (xy 167.110466 55.92202) (xy 167.22227 55.810216) (xy 167.301327 55.673284) (xy 167.34225 55.520557) - (xy 167.34225 55.362443) (xy 167.341119 55.358221) (xy 167.344322 55.29712) (xy 167.382829 55.24957) - (xy 167.436746 55.2336) (xy 167.620923 55.2336) (xy 167.620923 55.233599) (xy 167.651349 55.230746) - (xy 167.779532 55.185893) (xy 167.8888 55.10525) (xy 167.969443 54.995982) (xy 168.014296 54.867799) - (xy 168.017149 54.837373) (xy 168.01715 54.837373) (xy 168.01715 54.428827) (xy 168.017149 54.428825) - (xy 168.015726 54.413649) (xy 168.014296 54.398401) (xy 167.969443 54.270218) (xy 167.900803 54.177214) - (xy 167.888804 54.160955) (xy 167.888802 54.160953) (xy 167.8888 54.16095) (xy 167.888796 54.160947) - (xy 167.888794 54.160945) (xy 167.776075 54.077755) (xy 167.740482 54.027988) (xy 167.74094 53.966804) - (xy 167.776075 53.918445) (xy 167.886957 53.83661) (xy 167.8888 53.83525) (xy 167.969443 53.725982) - (xy 168.014296 53.597799) (xy 168.017149 53.567373) (xy 168.01715 53.567373) (xy 168.01715 53.158827) - (xy 168.017149 53.158825) (xy 168.014296 53.128405) (xy 168.014296 53.128401) (xy 167.969443 53.000218) - (xy 167.952738 52.977584) (xy 167.888804 52.890955) (xy 167.888802 52.890953) (xy 167.8888 52.89095) - (xy 167.888796 52.890947) (xy 167.888794 52.890945) (xy 167.776075 52.807755) (xy 167.740482 52.757988) - (xy 167.74094 52.696804) (xy 167.776075 52.648445) (xy 167.861331 52.585523) (xy 167.8888 52.56525) - (xy 167.969443 52.455982) (xy 168.014296 52.327799) (xy 168.017149 52.297373) (xy 168.01715 52.297373) - (xy 168.01715 51.888827) (xy 168.017149 51.888825) (xy 168.014296 51.858401) (xy 167.969443 51.730218) - (xy 167.9546 51.710107) (xy 167.911145 51.651226) (xy 167.891803 51.593178) (xy 167.910274 51.534848) - (xy 167.940405 51.507225) (xy 167.968202 51.490785) (xy 168.084335 51.374652) (xy 168.16793 51.233301) - (xy 168.16793 51.2333) (xy 168.213748 51.075593) (xy 168.21375 51.075586) (xy 168.213946 51.0731) - (xy 165.269354 51.0731) (xy 165.269549 51.075586) (xy 165.269551 51.075593) (xy 165.315369 51.2333) - (xy 165.315369 51.233301) (xy 165.398964 51.374652) (xy 165.515097 51.490785) (xy 165.542895 51.507225) - (xy 165.556475 51.522628) (xy 165.573007 51.534821) (xy 165.576253 51.545061) (xy 165.583358 51.55312) - (xy 165.585291 51.573569) (xy 165.591497 51.593146) (xy 165.588104 51.603337) (xy 165.589116 51.614034) - (xy 165.572175 51.651198) (xy 165.571315 51.652363) (xy 165.521562 51.687971) (xy 165.491643 51.6926) - (xy 165.475777 51.6926) (xy 165.370323 51.6926) (xy 165.307979 51.709304) (xy 165.268457 51.719894) - (xy 165.177141 51.772616) (xy 165.17714 51.772617) (xy 162.279953 54.669802) (xy 162.225436 54.697579) - (xy 162.165004 54.688008) (xy 162.121739 54.644743) (xy 162.110949 54.599798) (xy 162.110949 54.473633) - (xy 162.110948 54.473617) (xy 162.104541 54.403096) (xy 162.104539 54.40309) (xy 162.05397 54.240807) - (xy 162.053967 54.240799) (xy 161.966025 54.095327) (xy 161.845822 53.975124) (xy 161.70035 53.887182) - (xy 161.700342 53.887179) (xy 161.53806 53.83661) (xy 161.538054 53.836608) (xy 161.467531 53.8302) - (xy 161.385951 53.8302) (xy 161.38595 53.830201) (xy 161.38595 54.6312) (xy 161.367043 54.689391) - (xy 161.317543 54.725355) (xy 161.28695 54.7302) (xy 160.98495 54.7302) (xy 160.926759 54.711293) - (xy 160.890795 54.661793) (xy 160.88595 54.6312) (xy 160.88595 53.830201) (xy 160.885948 53.830199) - (xy 160.841551 53.8302) (xy 160.78336 53.811293) (xy 160.747396 53.761794) (xy 160.74255 53.7312) - (xy 160.74255 53.070284) (xy 160.761457 53.012093) (xy 160.77154 53.000286) (xy 161.779324 51.992501) - (xy 161.813005 51.97041) (xy 161.901625 51.935464) (xy 162.001037 51.860077) (xy 162.058828 51.839981) - (xy 162.117394 51.857692) (xy 162.145117 51.886987) (xy 162.169076 51.925829) (xy 162.169076 51.92583) - (xy 162.28892 52.045674) (xy 162.433162 52.134645) (xy 162.594046 52.187956) (xy 162.693326 52.198099) - (xy 162.71665 52.198098) (xy 162.71665 51.473101) (xy 163.21665 51.473101) (xy 163.21665 52.198098) - (xy 163.216651 52.198099) (xy 163.239972 52.198099) (xy 163.339247 52.187957) (xy 163.339259 52.187954) - (xy 163.500137 52.134645) (xy 163.644379 52.045674) (xy 163.764224 51.925829) (xy 163.853195 51.781587) - (xy 163.906506 51.620703) (xy 163.91665 51.521423) (xy 163.91665 51.473101) (xy 163.916649 51.4731) - (xy 163.216651 51.4731) (xy 163.21665 51.473101) (xy 162.71665 51.473101) (xy 162.71665 50.248101) - (xy 163.21665 50.248101) (xy 163.21665 50.973099) (xy 163.216651 50.9731) (xy 163.916648 50.9731) - (xy 163.916649 50.973099) (xy 163.916649 50.924777) (xy 163.906507 50.825502) (xy 163.906504 50.82549) - (xy 163.853195 50.664614) (xy 163.850643 50.660475) (xy 163.850642 50.660472) (xy 163.796749 50.5731) - (xy 165.269354 50.5731) (xy 166.491649 50.5731) (xy 166.49165 50.573099) (xy 166.49165 50.023101) - (xy 166.99165 50.023101) (xy 166.99165 50.573099) (xy 166.991651 50.5731) (xy 168.213945 50.5731) - (xy 168.21375 50.570613) (xy 168.213748 50.570606) (xy 168.16793 50.412899) (xy 168.16793 50.412898) - (xy 168.084335 50.271547) (xy 167.968202 50.155414) (xy 167.82685 50.071819) (xy 167.669139 50.025999) - (xy 167.632287 50.0231) (xy 166.991651 50.0231) (xy 166.99165 50.023101) (xy 166.49165 50.023101) - (xy 166.491649 50.0231) (xy 165.851013 50.0231) (xy 165.81416 50.025999) (xy 165.656449 50.071819) - (xy 165.656448 50.071819) (xy 165.515097 50.155414) (xy 165.398964 50.271547) (xy 165.315369 50.412898) - (xy 165.315369 50.412899) (xy 165.269551 50.570606) (xy 165.269549 50.570613) (xy 165.269354 50.5731) - (xy 163.796749 50.5731) (xy 163.764224 50.52037) (xy 163.644379 50.400525) (xy 163.500137 50.311554) - (xy 163.339253 50.258243) (xy 163.239973 50.2481) (xy 163.216651 50.2481) (xy 163.21665 50.248101) - (xy 162.71665 50.248101) (xy 162.71665 50.2481) (xy 162.716649 50.248099) (xy 162.693339 50.2481) - (xy 162.693334 50.248101) (xy 162.594051 50.258242) (xy 162.59404 50.258245) (xy 162.433162 50.311554) - (xy 162.368123 50.351672) (xy 162.30867 50.366129) (xy 162.252074 50.342879) (xy 162.219953 50.290804) - (xy 162.21715 50.267412) (xy 162.21715 47.7476) (xy 162.236057 47.689409) (xy 162.285557 47.653445) - (xy 162.31615 47.6486) (xy 162.83475 47.6486) (xy 162.834752 47.6486) (xy 162.923214 47.637977) - (xy 163.063992 47.582461) (xy 163.184572 47.491022) (xy 163.276011 47.370442) (xy 163.331527 47.229664) - (xy 163.34215 47.141202) (xy 163.34215 46.404998) (xy 163.331527 46.316536) (xy 163.28086 46.188054) - (xy 163.276012 46.17576) (xy 163.276011 46.175759) (xy 163.276011 46.175758) (xy 163.184572 46.055178) - (xy 163.063992 45.963739) (xy 163.063991 45.963738) (xy 163.063989 45.963737) (xy 162.923215 45.908223) - (xy 162.834756 45.8976) (xy 162.834752 45.8976) (xy 160.548548 45.8976) (xy 160.548543 45.8976) - (xy 160.460084 45.908223) (xy 160.31931 45.963737) (xy 160.319306 45.96374) (xy 160.198731 46.055175) - (xy 160.198725 46.055181) (xy 160.10729 46.175756) (xy 160.107287 46.17576) (xy 160.051773 46.316534) - (xy 160.04115 46.404993) (xy 160.04115 47.141206) (xy 160.051773 47.229665) (xy 160.107287 47.370439) - (xy 160.107288 47.370441) (xy 160.107289 47.370442) (xy 160.198728 47.491022) (xy 160.319308 47.582461) - (xy 160.319309 47.582461) (xy 160.31931 47.582462) (xy 160.434086 47.627724) (xy 160.460086 47.637977) - (xy 160.528954 47.646247) (xy 160.584475 47.671958) (xy 160.614281 47.725393) (xy 160.61615 47.744541) - (xy 160.61615 50.850514) (xy 160.597243 50.908705) (xy 160.587154 50.920517) (xy 159.954552 51.55312) - (xy 159.320264 52.187407) (xy 159.320261 52.187411) (xy 159.232659 52.318514) (xy 159.232653 52.318525) - (xy 159.172313 52.464201) (xy 159.172313 52.464203) (xy 159.14155 52.618855) (xy 159.14155 57.124714) - (xy 159.122643 57.182905) (xy 159.112554 57.194718) (xy 158.657064 57.650207) (xy 158.657061 57.650211) - (xy 158.569459 57.781314) (xy 158.569453 57.781325) (xy 158.509113 57.927001) (xy 158.509113 57.927003) - (xy 158.47835 58.081655) (xy 158.47835 61.873714) (xy 158.459443 61.931905) (xy 158.449354 61.943718) - (xy 158.014654 62.378418) (xy 157.960137 62.406195) (xy 157.899705 62.396624) (xy 157.85644 62.353359) - (xy 157.84565 62.308414) (xy 157.84565 53.49776) (xy 157.845649 53.497755) (xy 157.840497 53.471855) - (xy 157.835265 53.445547) (xy 157.814888 53.343103) (xy 157.754544 53.197421) (xy 157.666939 53.066311) - (xy 155.821146 51.220518) (xy 155.793369 51.166001) (xy 155.79215 51.150514) (xy 155.79215 49.679999) - (xy 155.792149 49.679993) (xy 155.781527 49.591536) (xy 155.734474 49.472219) (xy 155.726012 49.45076) - (xy 155.726011 49.450759) (xy 155.726011 49.450758) (xy 155.634572 49.330178) (xy 155.513992 49.238739) - (xy 155.513991 49.238738) (xy 155.513989 49.238737) (xy 155.373215 49.183223) (xy 155.284756 49.1726) - (xy 155.284752 49.1726) (xy 154.098548 49.1726) (xy 154.098543 49.1726) (xy 154.010084 49.183223) - (xy 153.86931 49.238737) (xy 153.869306 49.23874) (xy 153.748731 49.330175) (xy 153.748725 49.330181) - (xy 153.65729 49.450756) (xy 153.657287 49.45076) (xy 153.601773 49.591534) (xy 153.59115 49.679993) - (xy 153.59115 52.600661) (xy 153.572243 52.658852) (xy 153.522743 52.694816) (xy 153.461557 52.694816) - (xy 153.422146 52.670665) (xy 152.884029 52.132548) (xy 152.884027 52.132545) (xy 152.741383 51.989901) - (xy 152.713608 51.935387) (xy 152.723179 51.874955) (xy 152.725642 51.870419) (xy 152.776527 51.782284) - (xy 152.81745 51.629557) (xy 152.81745 51.471443) (xy 152.776527 51.318716) (xy 152.69747 51.181784) - (xy 152.681687 51.166001) (xy 152.646446 51.130759) (xy 152.618669 51.076242) (xy 152.61745 51.060756) - (xy 152.61745 49.158172) (xy 152.610573 49.13251) (xy 152.610572 49.132507) (xy 152.609256 49.127595) - (xy 152.590157 49.056312) (xy 152.590155 49.056309) (xy 152.590155 49.056307) (xy 152.537433 48.964991) - (xy 152.537432 48.96499) (xy 152.537431 48.964989) (xy 152.53743 48.964987) (xy 150.221146 46.648703) - (xy 150.193369 46.594186) (xy 150.19215 46.578699) (xy 150.19215 46.073101) (xy 153.391651 46.073101) - (xy 153.391651 47.373086) (xy 153.402142 47.475787) (xy 153.402145 47.475799) (xy 153.457293 47.642224) - (xy 153.54933 47.79144) (xy 153.673309 47.915419) (xy 153.822525 48.007456) (xy 153.988956 48.062606) - (xy 154.091663 48.073099) (xy 154.441648 48.073099) (xy 154.44165 48.073098) (xy 154.44165 46.073101) - (xy 154.94165 46.073101) (xy 154.94165 48.073098) (xy 154.941651 48.073099) (xy 155.291636 48.073099) - (xy 155.394337 48.062607) (xy 155.394349 48.062604) (xy 155.560774 48.007456) (xy 155.70999 47.915419) - (xy 155.833969 47.79144) (xy 155.926006 47.642224) (xy 155.981156 47.475793) (xy 155.99165 47.373087) - (xy 155.99165 46.073101) (xy 155.991649 46.0731) (xy 154.941651 46.0731) (xy 154.94165 46.073101) - (xy 154.44165 46.073101) (xy 154.441649 46.0731) (xy 153.391652 46.0731) (xy 153.391651 46.073101) - (xy 150.19215 46.073101) (xy 150.19215 44.829999) (xy 150.192149 44.829993) (xy 150.191185 44.821964) - (xy 150.181527 44.741536) (xy 150.126011 44.600758) (xy 150.034572 44.480178) (xy 149.913992 44.388739) - (xy 149.913991 44.388738) (xy 149.913989 44.388737) (xy 149.847957 44.362698) (xy 149.773215 44.333223) - (xy 149.684756 44.3226) (xy 149.684752 44.3226) (xy 148.973548 44.3226) (xy 148.973543 44.3226) - (xy 148.885084 44.333223) (xy 148.74431 44.388737) (xy 148.744306 44.38874) (xy 148.623731 44.480175) - (xy 148.623725 44.480181) (xy 148.53229 44.600756) (xy 148.532287 44.60076) (xy 148.476773 44.741534) - (xy 148.46615 44.829993) (xy 148.46615 47.816206) (xy 148.476773 47.904665) (xy 148.533423 48.048318) - (xy 148.537182 48.109388) (xy 148.504327 48.161004) (xy 148.447408 48.18345) (xy 148.388165 48.168153) - (xy 148.371322 48.154641) (xy 145.946146 45.729465) (xy 145.918369 45.674948) (xy 145.91715 45.659461) - (xy 145.91715 44.829999) (xy 145.917149 44.829993) (xy 145.916185 44.821964) (xy 145.906527 44.741536) - (xy 145.851011 44.600758) (xy 145.759572 44.480178) (xy 145.638992 44.388739) (xy 145.638991 44.388738) - (xy 145.638989 44.388737) (xy 145.498215 44.333223) (xy 145.409756 44.3226) (xy 145.409752 44.3226) - (xy 144.698548 44.3226) (xy 144.698543 44.3226) (xy 144.610084 44.333223) (xy 144.46931 44.388737) - (xy 144.469306 44.38874) (xy 144.348731 44.480175) (xy 144.348725 44.480181) (xy 144.25729 44.600756) - (xy 144.257287 44.60076) (xy 144.201773 44.741534) (xy 144.19115 44.829993) (xy 144.19115 45.1736) - (xy 144.172243 45.231791) (xy 144.122743 45.267755) (xy 144.09215 45.2726) (xy 139.041734 45.2726) - (xy 138.983544 45.253693) (xy 138.894644 45.189104) (xy 138.894643 45.189103) (xy 138.894641 45.189102) - (xy 138.733287 45.106888) (xy 138.561056 45.050928) (xy 138.382199 45.0226) (xy 138.382196 45.0226) - (xy 138.201104 45.0226) (xy 138.201101 45.0226) (xy 138.022243 45.050928) (xy 137.850012 45.106888) - (xy 137.688658 45.189102) (xy 137.634433 45.228499) (xy 137.542149 45.295547) (xy 137.414097 45.423599) - (xy 137.376244 45.4757) (xy 137.307652 45.570108) (xy 137.225438 45.731462) (xy 137.169478 45.903693) - (xy 137.14115 46.08255) (xy 137.14115 46.563649) (xy 137.169478 46.742506) (xy 137.225438 46.914737) - (xy 137.306739 47.0743) (xy 137.307654 47.076094) (xy 137.414097 47.222601) (xy 137.542149 47.350653) - (xy 137.688656 47.457096) (xy 137.850011 47.539311) (xy 138.022241 47.595271) (xy 138.093786 47.606602) - (xy 138.201101 47.6236) (xy 138.201104 47.6236) (xy 138.382199 47.6236) (xy 138.471627 47.609435) - (xy 138.561059 47.595271) (xy 138.733289 47.539311) (xy 138.894644 47.457096) (xy 138.983544 47.392506) - (xy 139.041734 47.3736) (xy 144.09215 47.3736) (xy 144.150341 47.392507) (xy 144.186305 47.442007) - (xy 144.19115 47.4726) (xy 144.19115 47.816206) (xy 144.201773 47.904665) (xy 144.257287 48.045439) - (xy 144.257288 48.045441) (xy 144.257289 48.045442) (xy 144.348728 48.166022) (xy 144.469308 48.257461) - (xy 144.469309 48.257461) (xy 144.46931 48.257462) (xy 144.539697 48.285219) (xy 144.610086 48.312977) - (xy 144.698548 48.3236) (xy 144.69855 48.3236) (xy 145.40975 48.3236) (xy 145.409752 48.3236) (xy 145.498214 48.312977) - (xy 145.498216 48.312976) (xy 145.504163 48.312262) (xy 145.564193 48.324096) (xy 145.585971 48.340552) - (xy 150.71727 53.471851) (xy 150.717273 53.471855) (xy 150.863595 53.618177) (xy 151.035652 53.733141) - (xy 151.22683 53.81233) (xy 151.429785 53.8527) (xy 151.591911 53.8527) (xy 151.650102 53.871607) - (xy 151.661915 53.881696) (xy 152.625475 54.845256) (xy 152.653252 54.899773) (xy 152.643681 54.960205) - (xy 152.600416 55.00347) (xy 152.586064 55.009415) (xy 152.393434 55.072004) (xy 152.204096 55.168476) - (xy 152.204092 55.168478) (xy 152.149932 55.207828) (xy 152.782241 55.840137) (xy 152.718657 55.857175) - (xy 152.604643 55.923001) (xy 152.511551 56.016093) (xy 152.445725 56.130107) (xy 152.428687 56.193691) - (xy 151.796378 55.561382) (xy 151.757028 55.615542) (xy 151.757026 55.615546) (xy 151.660554 55.804884) - (xy 151.630922 55.896084) (xy 151.594958 55.945584) (xy 151.536767 55.964491) (xy 151.478576 55.945584) - (xy 151.442612 55.896084) (xy 151.442612 55.896083) (xy 151.437861 55.881462) (xy 151.437861 55.881461) - (xy 151.355646 55.720106) (xy 151.249203 55.573599) (xy 151.121151 55.445547) (xy 150.974644 55.339104) - (xy 150.974643 55.339103) (xy 150.974641 55.339102) (xy 150.813287 55.256888) (xy 150.641056 55.200928) - (xy 150.462199 55.1726) (xy 150.462196 55.1726) (xy 150.281104 55.1726) (xy 150.281101 55.1726) - (xy 150.102243 55.200928) (xy 149.930012 55.256888) (xy 149.768658 55.339102) (xy 149.716268 55.377166) - (xy 149.622149 55.445547) (xy 149.494097 55.573599) (xy 149.454212 55.628496) (xy 149.387652 55.720108) - (xy 149.305438 55.881462) (xy 149.249478 56.053693) (xy 149.22115 56.23255) (xy 149.22115 56.413649) - (xy 149.249478 56.592506) (xy 149.305438 56.764737) (xy 149.382114 56.915223) (xy 149.387654 56.926094) - (xy 149.494097 57.072601) (xy 149.622149 57.200653) (xy 149.768656 57.307096) (xy 149.930011 57.389311) - (xy 150.102241 57.445271) (xy 150.173786 57.456602) (xy 150.281101 57.4736) (xy 150.281104 57.4736) - (xy 150.462199 57.4736) (xy 150.551627 57.459435) (xy 150.641059 57.445271) (xy 150.813289 57.389311) - (xy 150.813292 57.389309) (xy 150.813296 57.389308) (xy 150.924288 57.332754) (xy 150.964177 57.312429) - (xy 150.96418 57.312428) (xy 150.967816 57.310574) (xy 150.974644 57.307096) (xy 151.121151 57.200653) - (xy 151.249203 57.072601) (xy 151.355646 56.926094) (xy 151.437861 56.764739) (xy 151.439217 56.760565) - (xy 151.442612 56.750118) (xy 151.478574 56.700617) (xy 151.536765 56.681708) (xy 151.594956 56.700614) - (xy 151.630921 56.750113) (xy 151.630922 56.750115) (xy 151.660554 56.841315) (xy 151.757026 57.030653) - (xy 151.75703 57.030659) (xy 151.796378 57.084816) (xy 151.796379 57.084816) (xy 152.428687 56.452507) - (xy 152.445725 56.516093) (xy 152.511551 56.630107) (xy 152.604643 56.723199) (xy 152.718657 56.789025) - (xy 152.782239 56.806062) (xy 152.149932 57.438369) (xy 152.149932 57.43837) (xy 152.20409 57.477719) - (xy 152.204096 57.477723) (xy 152.393434 57.574195) (xy 152.595528 57.639859) (xy 152.8054 57.6731) - (xy 153.0179 57.6731) (xy 153.227771 57.639859) (xy 153.429865 57.574195) (xy 153.619206 57.47772) - (xy 153.673366 57.43837) (xy 153.041058 56.806062) (xy 153.104643 56.789025) (xy 153.218657 56.723199) - (xy 153.311749 56.630107) (xy 153.377575 56.516093) (xy 153.394612 56.452508) (xy 154.02692 57.084816) - (xy 154.06627 57.030656) (xy 154.162746 56.841313) (xy 154.192377 56.750116) (xy 154.22834 56.700616) - (xy 154.286531 56.681708) (xy 154.344722 56.700615) (xy 154.380686 56.750113) (xy 154.385438 56.764737) - (xy 154.462114 56.915223) (xy 154.467654 56.926094) (xy 154.574097 57.072601) (xy 154.702149 57.200653) - (xy 154.848656 57.307096) (xy 155.010011 57.389311) (xy 155.182241 57.445271) (xy 155.253786 57.456602) - (xy 155.361101 57.4736) (xy 155.361104 57.4736) (xy 155.542199 57.4736) (xy 155.631627 57.459435) - (xy 155.721059 57.445271) (xy 155.893289 57.389311) (xy 156.054644 57.307096) (xy 156.08746 57.283253) - (xy 156.14565 57.264347) (xy 156.203841 57.283254) (xy 156.239805 57.332754) (xy 156.24465 57.363347) - (xy 156.24465 60.772085) (xy 156.225743 60.830276) (xy 156.176243 60.86624) (xy 156.115057 60.86624) - (xy 156.065557 60.830276) (xy 156.059914 60.821585) (xy 156.043171 60.792586) (xy 156.04317 60.792584) - (xy 155.931366 60.68078) (xy 155.794434 60.601723) (xy 155.641707 60.5608) (xy 155.483593 60.5608) - (xy 155.330866 60.601723) (xy 155.208103 60.6726) (xy 155.193931 60.680782) (xy 155.142909 60.731804) - (xy 155.088392 60.759581) (xy 155.072906 60.7608) (xy 148.087256 60.7608) (xy 148.08724 60.760799) - (xy 148.081177 60.760799) (xy 147.975723 60.760799) (xy 147.97572 60.760799) (xy 147.876026 60.787513) - (xy 147.876019 60.787515) (xy 147.873867 60.788091) (xy 147.87386 60.788094) (xy 147.782537 60.840819) - (xy 147.707969 60.915386) (xy 147.70797 60.915387) (xy 145.879753 62.743604) (xy 145.825236 62.771381) - (xy 145.809749 62.7726) (xy 145.174875 62.7726) (xy 145.144455 62.775453) (xy 145.144446 62.775455) - (xy 145.016266 62.820307) (xy 144.907005 62.900945) (xy 144.906995 62.900955) (xy 144.826357 63.010216) - (xy 144.781505 63.138396) (xy 144.781503 63.138405) (xy 144.77865 63.168825) (xy 144.77865 63.577374) - (xy 144.781503 63.607794) (xy 144.781505 63.607803) (xy 144.826357 63.735983) (xy 144.906995 63.845244) - (xy 144.906997 63.845246) (xy 144.907 63.84525) (xy 144.907003 63.845252) (xy 144.907005 63.845254) - (xy 145.016266 63.925892) (xy 145.016267 63.925892) (xy 145.016268 63.925893) (xy 145.144451 63.970746) - (xy 145.174875 63.973599) (xy 145.174877 63.9736) (xy 145.174884 63.9736) (xy 146.458423 63.9736) - (xy 146.458423 63.973599) (xy 146.488849 63.970746) (xy 146.532771 63.955376) (xy 146.593937 63.954003) - (xy 146.644233 63.988846) (xy 146.664442 64.046598) (xy 146.658913 64.081514) (xy 146.656505 64.088396) - (xy 146.656503 64.088405) (xy 146.65365 64.118825) (xy 146.65365 64.386854) (xy 146.634743 64.445045) - (xy 146.585243 64.481009) (xy 146.527033 64.481924) (xy 146.506639 64.475999) (xy 146.469787 64.4731) - (xy 146.066651 64.4731) (xy 146.06665 64.473101) (xy 146.06665 65.023099) (xy 146.066651 65.0231) - (xy 147.051446 65.0231) (xy 147.054575 65.019715) (xy 147.066303 64.970871) (xy 147.112829 64.931135) - (xy 147.150713 64.9236) (xy 148.333423 64.9236) (xy 148.333423 64.923599) (xy 148.363849 64.920746) - (xy 148.492032 64.875893) (xy 148.6013 64.79525) (xy 148.624502 64.763811) (xy 148.67427 64.728219) - (xy 148.704158 64.7236) (xy 152.267979 64.7236) (xy 152.32617 64.742507) (xy 152.362134 64.792007) - (xy 152.362134 64.853193) (xy 152.347634 64.881388) (xy 152.326357 64.910216) (xy 152.281505 65.038396) - (xy 152.281503 65.038405) (xy 152.27865 65.068825) (xy 152.27865 65.3775) (xy 152.259743 65.435691) - (xy 152.210243 65.471655) (xy 152.17965 65.4765) (xy 104.325636 65.4765) (xy 104.267445 65.457593) - (xy 104.255632 65.447504) (xy 103.831228 65.0231) (xy 144.581854 65.0231) (xy 145.566649 65.0231) - (xy 145.56665 65.023099) (xy 145.56665 64.473101) (xy 145.566649 64.4731) (xy 145.163513 64.4731) - (xy 145.12666 64.475999) (xy 144.968949 64.521819) (xy 144.968948 64.521819) (xy 144.827597 64.605414) - (xy 144.711464 64.721547) (xy 144.627869 64.862898) (xy 144.627869 64.862899) (xy 144.582051 65.020606) - (xy 144.582049 65.020613) (xy 144.581854 65.0231) (xy 103.831228 65.0231) (xy 100.958646 62.150518) - (xy 100.955019 62.1434) (xy 100.948557 62.138705) (xy 100.941393 62.116656) (xy 100.930869 62.096001) - (xy 100.92965 62.080514) (xy 100.92965 61.925783) (xy 100.948557 61.867592) (xy 100.969859 61.846129) - (xy 101.0388 61.79525) (xy 101.119443 61.685982) (xy 101.164296 61.557799) (xy 101.167149 61.527373) - (xy 101.16715 61.527373) (xy 101.16715 61.118827) (xy 101.167149 61.118825) (xy 101.16459 61.091536) - (xy 101.164296 61.088401) (xy 101.119443 60.960218) (xy 101.117792 60.957981) (xy 101.038804 60.850955) - (xy 101.038802 60.850953) (xy 101.0388 60.85095) (xy 101.038796 60.850947) (xy 101.038794 60.850945) - (xy 100.929533 60.770307) (xy 100.801353 60.725455) (xy 100.801344 60.725453) (xy 100.770924 60.7226) - (xy 100.770916 60.7226) (xy 100.700802 60.7226) (xy 100.643502 60.703982) (xy 100.643482 60.704013) - (xy 100.643374 60.70394) (xy 100.642611 60.703693) (xy 100.640105 60.701756) (xy 100.508335 60.613709) - (xy 100.508324 60.613703) (xy 100.362647 60.553363) (xy 100.207994 60.5226) (xy 100.207992 60.5226) - (xy 100.050308 60.5226) (xy 100.050305 60.5226) (xy 99.895653 60.553363) (xy 99.895651 60.553363) - (xy 99.749975 60.613703) (xy 99.749964 60.613709) (xy 99.666595 60.669416) (xy 99.618861 60.701311) - (xy 99.618859 60.701312) (xy 99.614818 60.704013) (xy 99.614042 60.702852) (xy 99.570667 60.72172) - (xy 99.56411 60.7226) (xy 99.487384 60.7226) (xy 99.456951 60.725454) (xy 99.403505 60.744155) (xy 99.393501 60.745498) - (xy 99.372849 60.741724) (xy 99.351859 60.742195) (xy 99.343415 60.736345) (xy 99.333312 60.734499) - (xy 99.318823 60.719307) (xy 99.301565 60.707351) (xy 99.298172 60.697655) (xy 99.291084 60.690223) - (xy 99.288291 60.669416) (xy 99.281357 60.649599) (xy 99.28367 60.634991) (xy 99.282945 60.629582) - (xy 99.285185 60.62543) (xy 99.286888 60.614679) (xy 99.289296 60.607799) (xy 99.292149 60.577373) - (xy 99.29215 60.577373) (xy 99.29215 60.168827) (xy 99.292149 60.168825) (xy 99.291838 60.165507) - (xy 99.289296 60.138401) (xy 99.244443 60.010218) (xy 99.231554 59.992754) (xy 99.163804 59.900955) - (xy 99.163802 59.900953) (xy 99.1638 59.90095) (xy 99.163796 59.900947) (xy 99.163794 59.900945) - (xy 99.054533 59.820307) (xy 98.926353 59.775455) (xy 98.926344 59.775453) (xy 98.895924 59.7726) - (xy 98.895916 59.7726) (xy 98.75365 59.7726) (xy 98.695459 59.753693) (xy 98.659495 59.704193) (xy 98.65465 59.6736) - (xy 98.65465 55.42823) (xy 106.04115 55.42823) (xy 106.04115 57.21796) (xy 106.041151 57.217963) - (xy 106.044064 57.24309) (xy 106.068354 57.2981) (xy 106.089444 57.345865) (xy 106.168885 57.425306) - (xy 106.271659 57.470685) (xy 106.296785 57.4736) (xy 108.086514 57.473599) (xy 108.111641 57.470685) - (xy 108.214415 57.425306) (xy 108.293856 57.345865) (xy 108.339235 57.243091) (xy 108.34215 57.217965) - (xy 108.342149 56.23255) (xy 108.58115 56.23255) (xy 108.58115 56.413649) (xy 108.609478 56.592506) - (xy 108.665438 56.764737) (xy 108.742114 56.915223) (xy 108.747654 56.926094) (xy 108.854097 57.072601) - (xy 108.982149 57.200653) (xy 109.128656 57.307096) (xy 109.290011 57.389311) (xy 109.462241 57.445271) - (xy 109.533786 57.456602) (xy 109.641101 57.4736) (xy 109.641104 57.4736) (xy 109.822199 57.4736) - (xy 109.911627 57.459435) (xy 110.001059 57.445271) (xy 110.173289 57.389311) (xy 110.334644 57.307096) - (xy 110.481151 57.200653) (xy 110.609203 57.072601) (xy 110.715646 56.926094) (xy 110.797861 56.764739) - (xy 110.853821 56.592509) (xy 110.88215 56.413646) (xy 110.88215 56.232554) (xy 110.88215 56.23255) - (xy 111.12115 56.23255) (xy 111.12115 56.413649) (xy 111.149478 56.592506) (xy 111.205438 56.764737) - (xy 111.282114 56.915223) (xy 111.287654 56.926094) (xy 111.394097 57.072601) (xy 111.522149 57.200653) - (xy 111.668656 57.307096) (xy 111.830011 57.389311) (xy 112.002241 57.445271) (xy 112.073786 57.456602) - (xy 112.181101 57.4736) (xy 112.181104 57.4736) (xy 112.362199 57.4736) (xy 112.451627 57.459435) - (xy 112.541059 57.445271) (xy 112.713289 57.389311) (xy 112.874644 57.307096) (xy 113.021151 57.200653) - (xy 113.149203 57.072601) (xy 113.255646 56.926094) (xy 113.337861 56.764739) (xy 113.393821 56.592509) - (xy 113.42215 56.413646) (xy 113.42215 56.232554) (xy 113.42215 56.23255) (xy 113.66115 56.23255) - (xy 113.66115 56.413649) (xy 113.689478 56.592506) (xy 113.745438 56.764737) (xy 113.822114 56.915223) - (xy 113.827654 56.926094) (xy 113.934097 57.072601) (xy 114.062149 57.200653) (xy 114.208656 57.307096) - (xy 114.370011 57.389311) (xy 114.542241 57.445271) (xy 114.613786 57.456602) (xy 114.721101 57.4736) - (xy 114.721104 57.4736) (xy 114.902199 57.4736) (xy 114.991627 57.459435) (xy 115.081059 57.445271) - (xy 115.253289 57.389311) (xy 115.414644 57.307096) (xy 115.561151 57.200653) (xy 115.689203 57.072601) - (xy 115.795646 56.926094) (xy 115.877861 56.764739) (xy 115.933821 56.592509) (xy 115.96215 56.413646) - (xy 115.96215 56.232554) (xy 115.96215 56.23255) (xy 116.20115 56.23255) (xy 116.20115 56.413649) - (xy 116.229478 56.592506) (xy 116.285438 56.764737) (xy 116.362114 56.915223) (xy 116.367654 56.926094) - (xy 116.474097 57.072601) (xy 116.602149 57.200653) (xy 116.748656 57.307096) (xy 116.910011 57.389311) - (xy 117.082241 57.445271) (xy 117.153786 57.456602) (xy 117.261101 57.4736) (xy 117.261104 57.4736) - (xy 117.442199 57.4736) (xy 117.531627 57.459435) (xy 117.621059 57.445271) (xy 117.779504 57.39379) - (xy 117.840688 57.39379) (xy 117.880099 57.417941) (xy 118.182868 57.72071) (xy 118.18287 57.720713) - (xy 118.257437 57.79528) (xy 118.3031 57.821643) (xy 118.348762 57.848007) (xy 118.450623 57.875301) - (xy 118.450625 57.875301) (xy 118.56214 57.875301) (xy 118.562156 57.8753) (xy 123.703206 57.8753) - (xy 123.761397 57.894207) (xy 123.773209 57.904296) (xy 123.82051 57.951596) (xy 123.824234 57.95532) - (xy 123.961166 58.034377) (xy 124.113893 58.0753) (xy 124.113895 58.0753) (xy 124.272005 58.0753) - (xy 124.272007 58.0753) (xy 124.424734 58.034377) (xy 124.561666 57.95532) (xy 124.67347 57.843516) - (xy 124.752527 57.706584) (xy 124.79345 57.553857) (xy 124.79345 57.553855) (xy 124.795129 57.547589) - (xy 124.798061 57.548374) (xy 124.819072 57.504403) (xy 124.872863 57.475245) (xy 124.890837 57.4736) - (xy 125.062199 57.4736) (xy 125.151627 57.459435) (xy 125.241059 57.445271) (xy 125.413289 57.389311) - (xy 125.574644 57.307096) (xy 125.721151 57.200653) (xy 125.849203 57.072601) (xy 125.955646 56.926094) - (xy 126.037861 56.764739) (xy 126.093821 56.592509) (xy 126.12215 56.413646) (xy 126.12215 56.232554) - (xy 126.12215 56.23255) (xy 126.36115 56.23255) (xy 126.36115 56.413649) (xy 126.389478 56.592506) - (xy 126.445438 56.764737) (xy 126.522114 56.915223) (xy 126.527654 56.926094) (xy 126.634097 57.072601) - (xy 126.762149 57.200653) (xy 126.908656 57.307096) (xy 127.070011 57.389311) (xy 127.242241 57.445271) - (xy 127.313786 57.456602) (xy 127.421101 57.4736) (xy 127.421104 57.4736) (xy 127.602199 57.4736) - (xy 127.691627 57.459435) (xy 127.781059 57.445271) (xy 127.953289 57.389311) (xy 128.114644 57.307096) - (xy 128.261151 57.200653) (xy 128.389203 57.072601) (xy 128.495646 56.926094) (xy 128.577861 56.764739) - (xy 128.633821 56.592509) (xy 128.66215 56.413646) (xy 128.66215 56.232554) (xy 128.66215 56.23255) - (xy 128.90115 56.23255) (xy 128.90115 56.413649) (xy 128.929478 56.592506) (xy 128.985438 56.764737) - (xy 129.062114 56.915223) (xy 129.067654 56.926094) (xy 129.174097 57.072601) (xy 129.302149 57.200653) - (xy 129.448656 57.307096) (xy 129.610011 57.389311) (xy 129.782241 57.445271) (xy 129.853786 57.456602) - (xy 129.961101 57.4736) (xy 129.961104 57.4736) (xy 130.142199 57.4736) (xy 130.231627 57.459435) - (xy 130.321059 57.445271) (xy 130.493289 57.389311) (xy 130.654644 57.307096) (xy 130.801151 57.200653) - (xy 130.929203 57.072601) (xy 131.035646 56.926094) (xy 131.117861 56.764739) (xy 131.173821 56.592509) - (xy 131.20215 56.413646) (xy 131.20215 56.232554) (xy 131.20215 56.23255) (xy 131.44115 56.23255) - (xy 131.44115 56.413649) (xy 131.469478 56.592506) (xy 131.525438 56.764737) (xy 131.602114 56.915223) - (xy 131.607654 56.926094) (xy 131.714097 57.072601) (xy 131.842149 57.200653) (xy 131.988656 57.307096) - (xy 132.150011 57.389311) (xy 132.322241 57.445271) (xy 132.393786 57.456602) (xy 132.501101 57.4736) - (xy 132.501104 57.4736) (xy 132.682199 57.4736) (xy 132.771627 57.459435) (xy 132.861059 57.445271) - (xy 133.033289 57.389311) (xy 133.194644 57.307096) (xy 133.341151 57.200653) (xy 133.469203 57.072601) - (xy 133.575646 56.926094) (xy 133.657861 56.764739) (xy 133.713821 56.592509) (xy 133.74215 56.413646) - (xy 133.74215 56.232554) (xy 133.74215 56.23255) (xy 133.98115 56.23255) (xy 133.98115 56.413649) - (xy 134.009478 56.592506) (xy 134.065438 56.764737) (xy 134.142114 56.915223) (xy 134.147654 56.926094) - (xy 134.254097 57.072601) (xy 134.382149 57.200653) (xy 134.528656 57.307096) (xy 134.690011 57.389311) - (xy 134.862241 57.445271) (xy 134.933786 57.456602) (xy 135.041101 57.4736) (xy 135.041104 57.4736) - (xy 135.222199 57.4736) (xy 135.311627 57.459435) (xy 135.401059 57.445271) (xy 135.573289 57.389311) - (xy 135.734644 57.307096) (xy 135.881151 57.200653) (xy 136.009203 57.072601) (xy 136.115646 56.926094) - (xy 136.197861 56.764739) (xy 136.253821 56.592509) (xy 136.28215 56.413646) (xy 136.28215 56.232554) - (xy 136.28215 56.23255) (xy 136.52115 56.23255) (xy 136.52115 56.413649) (xy 136.549478 56.592506) - (xy 136.605438 56.764737) (xy 136.682114 56.915223) (xy 136.687654 56.926094) (xy 136.794097 57.072601) - (xy 136.922149 57.200653) (xy 137.068656 57.307096) (xy 137.230011 57.389311) (xy 137.402241 57.445271) - (xy 137.473786 57.456602) (xy 137.581101 57.4736) (xy 137.581104 57.4736) (xy 137.762199 57.4736) - (xy 137.851627 57.459435) (xy 137.941059 57.445271) (xy 138.113289 57.389311) (xy 138.274644 57.307096) - (xy 138.421151 57.200653) (xy 138.549203 57.072601) (xy 138.655646 56.926094) (xy 138.737861 56.764739) - (xy 138.793821 56.592509) (xy 138.82215 56.413646) (xy 138.82215 56.232554) (xy 138.82215 56.23255) - (xy 139.06115 56.23255) (xy 139.06115 56.413649) (xy 139.089478 56.592506) (xy 139.145438 56.764737) - (xy 139.222114 56.915223) (xy 139.227654 56.926094) (xy 139.334097 57.072601) (xy 139.462149 57.200653) - (xy 139.608656 57.307096) (xy 139.770011 57.389311) (xy 139.942241 57.445271) (xy 140.013786 57.456602) - (xy 140.121101 57.4736) (xy 140.121104 57.4736) (xy 140.302199 57.4736) (xy 140.391627 57.459435) - (xy 140.481059 57.445271) (xy 140.653289 57.389311) (xy 140.814644 57.307096) (xy 140.961151 57.200653) - (xy 141.089203 57.072601) (xy 141.195646 56.926094) (xy 141.277861 56.764739) (xy 141.333821 56.592509) - (xy 141.36215 56.413646) (xy 141.36215 56.232554) (xy 141.36215 56.23255) (xy 141.60115 56.23255) - (xy 141.60115 56.413649) (xy 141.629478 56.592506) (xy 141.685438 56.764737) (xy 141.762114 56.915223) - (xy 141.767654 56.926094) (xy 141.874097 57.072601) (xy 142.002149 57.200653) (xy 142.148656 57.307096) - (xy 142.310011 57.389311) (xy 142.482241 57.445271) (xy 142.553786 57.456602) (xy 142.661101 57.4736) - (xy 142.661104 57.4736) (xy 142.842199 57.4736) (xy 142.931627 57.459435) (xy 143.021059 57.445271) - (xy 143.193289 57.389311) (xy 143.354644 57.307096) (xy 143.501151 57.200653) (xy 143.629203 57.072601) - (xy 143.735646 56.926094) (xy 143.817861 56.764739) (xy 143.873821 56.592509) (xy 143.90215 56.413646) - (xy 143.90215 56.232554) (xy 143.90215 56.23255) (xy 144.14115 56.23255) (xy 144.14115 56.413649) - (xy 144.169478 56.592506) (xy 144.225438 56.764737) (xy 144.302114 56.915223) (xy 144.307654 56.926094) - (xy 144.414097 57.072601) (xy 144.542149 57.200653) (xy 144.688656 57.307096) (xy 144.850011 57.389311) - (xy 145.022241 57.445271) (xy 145.093786 57.456602) (xy 145.201101 57.4736) (xy 145.201104 57.4736) - (xy 145.382199 57.4736) (xy 145.471627 57.459435) (xy 145.561059 57.445271) (xy 145.733289 57.389311) - (xy 145.894644 57.307096) (xy 146.041151 57.200653) (xy 146.169203 57.072601) (xy 146.275646 56.926094) - (xy 146.357861 56.764739) (xy 146.413821 56.592509) (xy 146.44215 56.413646) (xy 146.44215 56.232554) - (xy 146.44215 56.23255) (xy 146.68115 56.23255) (xy 146.68115 56.413649) (xy 146.709478 56.592506) - (xy 146.765438 56.764737) (xy 146.842114 56.915223) (xy 146.847654 56.926094) (xy 146.954097 57.072601) - (xy 147.082149 57.200653) (xy 147.228656 57.307096) (xy 147.390011 57.389311) (xy 147.562241 57.445271) - (xy 147.633786 57.456602) (xy 147.741101 57.4736) (xy 147.741104 57.4736) (xy 147.922199 57.4736) - (xy 148.011627 57.459435) (xy 148.101059 57.445271) (xy 148.273289 57.389311) (xy 148.434644 57.307096) - (xy 148.581151 57.200653) (xy 148.709203 57.072601) (xy 148.815646 56.926094) (xy 148.897861 56.764739) - (xy 148.953821 56.592509) (xy 148.98215 56.413646) (xy 148.98215 56.232554) (xy 148.98215 56.23255) - (xy 148.953821 56.053693) (xy 148.953821 56.053691) (xy 148.897861 55.881461) (xy 148.815646 55.720106) - (xy 148.709203 55.573599) (xy 148.581151 55.445547) (xy 148.434644 55.339104) (xy 148.434643 55.339103) - (xy 148.434641 55.339102) (xy 148.273287 55.256888) (xy 148.101056 55.200928) (xy 147.922199 55.1726) - (xy 147.922196 55.1726) (xy 147.741104 55.1726) (xy 147.741101 55.1726) (xy 147.562243 55.200928) - (xy 147.390012 55.256888) (xy 147.228658 55.339102) (xy 147.176268 55.377166) (xy 147.082149 55.445547) - (xy 146.954097 55.573599) (xy 146.914212 55.628496) (xy 146.847652 55.720108) (xy 146.765438 55.881462) - (xy 146.709478 56.053693) (xy 146.68115 56.23255) (xy 146.44215 56.23255) (xy 146.413821 56.053693) - (xy 146.413821 56.053691) (xy 146.357861 55.881461) (xy 146.275646 55.720106) (xy 146.169203 55.573599) - (xy 146.041151 55.445547) (xy 145.894644 55.339104) (xy 145.894643 55.339103) (xy 145.894641 55.339102) - (xy 145.733287 55.256888) (xy 145.561056 55.200928) (xy 145.382199 55.1726) (xy 145.382196 55.1726) - (xy 145.201104 55.1726) (xy 145.201101 55.1726) (xy 145.022243 55.200928) (xy 144.850012 55.256888) - (xy 144.688658 55.339102) (xy 144.636268 55.377166) (xy 144.542149 55.445547) (xy 144.414097 55.573599) - (xy 144.374212 55.628496) (xy 144.307652 55.720108) (xy 144.225438 55.881462) (xy 144.169478 56.053693) - (xy 144.14115 56.23255) (xy 143.90215 56.23255) (xy 143.873821 56.053693) (xy 143.873821 56.053691) - (xy 143.817861 55.881461) (xy 143.735646 55.720106) (xy 143.629203 55.573599) (xy 143.501151 55.445547) - (xy 143.354644 55.339104) (xy 143.354643 55.339103) (xy 143.354641 55.339102) (xy 143.193287 55.256888) - (xy 143.021056 55.200928) (xy 142.842199 55.1726) (xy 142.842196 55.1726) (xy 142.661104 55.1726) - (xy 142.661101 55.1726) (xy 142.482243 55.200928) (xy 142.310012 55.256888) (xy 142.148658 55.339102) - (xy 142.096268 55.377166) (xy 142.002149 55.445547) (xy 141.874097 55.573599) (xy 141.834212 55.628496) - (xy 141.767652 55.720108) (xy 141.685438 55.881462) (xy 141.629478 56.053693) (xy 141.60115 56.23255) - (xy 141.36215 56.23255) (xy 141.333821 56.053693) (xy 141.333821 56.053691) (xy 141.277861 55.881461) - (xy 141.195646 55.720106) (xy 141.089203 55.573599) (xy 140.961151 55.445547) (xy 140.814644 55.339104) - (xy 140.814643 55.339103) (xy 140.814641 55.339102) (xy 140.653287 55.256888) (xy 140.481056 55.200928) - (xy 140.302199 55.1726) (xy 140.302196 55.1726) (xy 140.121104 55.1726) (xy 140.121101 55.1726) - (xy 139.942243 55.200928) (xy 139.770012 55.256888) (xy 139.608658 55.339102) (xy 139.556268 55.377166) - (xy 139.462149 55.445547) (xy 139.334097 55.573599) (xy 139.294212 55.628496) (xy 139.227652 55.720108) - (xy 139.145438 55.881462) (xy 139.089478 56.053693) (xy 139.06115 56.23255) (xy 138.82215 56.23255) - (xy 138.793821 56.053693) (xy 138.793821 56.053691) (xy 138.737861 55.881461) (xy 138.655646 55.720106) - (xy 138.549203 55.573599) (xy 138.421151 55.445547) (xy 138.274644 55.339104) (xy 138.274643 55.339103) - (xy 138.274641 55.339102) (xy 138.113287 55.256888) (xy 137.941056 55.200928) (xy 137.762199 55.1726) - (xy 137.762196 55.1726) (xy 137.581104 55.1726) (xy 137.581101 55.1726) (xy 137.402243 55.200928) - (xy 137.230012 55.256888) (xy 137.068658 55.339102) (xy 137.016268 55.377166) (xy 136.922149 55.445547) - (xy 136.794097 55.573599) (xy 136.754212 55.628496) (xy 136.687652 55.720108) (xy 136.605438 55.881462) - (xy 136.549478 56.053693) (xy 136.52115 56.23255) (xy 136.28215 56.23255) (xy 136.253821 56.053693) - (xy 136.253821 56.053691) (xy 136.197861 55.881461) (xy 136.115646 55.720106) (xy 136.009203 55.573599) - (xy 135.881151 55.445547) (xy 135.734644 55.339104) (xy 135.734643 55.339103) (xy 135.734641 55.339102) - (xy 135.573287 55.256888) (xy 135.401056 55.200928) (xy 135.222199 55.1726) (xy 135.222196 55.1726) - (xy 135.041104 55.1726) (xy 135.041101 55.1726) (xy 134.862243 55.200928) (xy 134.690012 55.256888) - (xy 134.528658 55.339102) (xy 134.476268 55.377166) (xy 134.382149 55.445547) (xy 134.254097 55.573599) - (xy 134.214212 55.628496) (xy 134.147652 55.720108) (xy 134.065438 55.881462) (xy 134.009478 56.053693) - (xy 133.98115 56.23255) (xy 133.74215 56.23255) (xy 133.713821 56.053693) (xy 133.713821 56.053691) - (xy 133.657861 55.881461) (xy 133.575646 55.720106) (xy 133.469203 55.573599) (xy 133.341151 55.445547) - (xy 133.194644 55.339104) (xy 133.194643 55.339103) (xy 133.194641 55.339102) (xy 133.033287 55.256888) - (xy 132.861056 55.200928) (xy 132.682199 55.1726) (xy 132.682196 55.1726) (xy 132.501104 55.1726) - (xy 132.501101 55.1726) (xy 132.322243 55.200928) (xy 132.150012 55.256888) (xy 131.988658 55.339102) - (xy 131.936268 55.377166) (xy 131.842149 55.445547) (xy 131.714097 55.573599) (xy 131.674212 55.628496) - (xy 131.607652 55.720108) (xy 131.525438 55.881462) (xy 131.469478 56.053693) (xy 131.44115 56.23255) - (xy 131.20215 56.23255) (xy 131.173821 56.053693) (xy 131.173821 56.053691) (xy 131.117861 55.881461) - (xy 131.035646 55.720106) (xy 130.929203 55.573599) (xy 130.801151 55.445547) (xy 130.654644 55.339104) - (xy 130.654643 55.339103) (xy 130.654641 55.339102) (xy 130.493287 55.256888) (xy 130.321056 55.200928) - (xy 130.142199 55.1726) (xy 130.142196 55.1726) (xy 129.961104 55.1726) (xy 129.961101 55.1726) - (xy 129.782243 55.200928) (xy 129.610012 55.256888) (xy 129.448658 55.339102) (xy 129.396268 55.377166) - (xy 129.302149 55.445547) (xy 129.174097 55.573599) (xy 129.134212 55.628496) (xy 129.067652 55.720108) - (xy 128.985438 55.881462) (xy 128.929478 56.053693) (xy 128.90115 56.23255) (xy 128.66215 56.23255) - (xy 128.633821 56.053693) (xy 128.633821 56.053691) (xy 128.577861 55.881461) (xy 128.495646 55.720106) - (xy 128.389203 55.573599) (xy 128.261151 55.445547) (xy 128.114644 55.339104) (xy 128.114643 55.339103) - (xy 128.114641 55.339102) (xy 127.953287 55.256888) (xy 127.781056 55.200928) (xy 127.602199 55.1726) - (xy 127.602196 55.1726) (xy 127.421104 55.1726) (xy 127.421101 55.1726) (xy 127.242243 55.200928) - (xy 127.070012 55.256888) (xy 126.908658 55.339102) (xy 126.856268 55.377166) (xy 126.762149 55.445547) - (xy 126.634097 55.573599) (xy 126.594212 55.628496) (xy 126.527652 55.720108) (xy 126.445438 55.881462) - (xy 126.389478 56.053693) (xy 126.36115 56.23255) (xy 126.12215 56.23255) (xy 126.093821 56.053693) - (xy 126.093821 56.053691) (xy 126.037861 55.881461) (xy 125.955646 55.720106) (xy 125.849203 55.573599) - (xy 125.721151 55.445547) (xy 125.574644 55.339104) (xy 125.574643 55.339103) (xy 125.574641 55.339102) - (xy 125.413287 55.256888) (xy 125.241056 55.200928) (xy 125.062199 55.1726) (xy 125.062196 55.1726) - (xy 124.881104 55.1726) (xy 124.881101 55.1726) (xy 124.702243 55.200928) (xy 124.530012 55.256888) - (xy 124.368658 55.339102) (xy 124.316268 55.377166) (xy 124.222149 55.445547) (xy 124.094097 55.573599) - (xy 124.054212 55.628496) (xy 123.987652 55.720108) (xy 123.905438 55.881462) (xy 123.849478 56.053693) - (xy 123.82115 56.23255) (xy 123.82115 56.413649) (xy 123.849478 56.592506) (xy 123.905438 56.764737) - (xy 123.934701 56.822169) (xy 123.935806 56.829151) (xy 123.940067 56.834794) (xy 123.940509 56.858845) - (xy 123.944272 56.882601) (xy 123.941062 56.888899) (xy 123.941193 56.895969) (xy 123.930792 56.909057) - (xy 123.916495 56.937118) (xy 123.906146 56.946122) (xy 123.901269 56.949803) (xy 123.824234 56.99428) - (xy 123.768351 57.050162) (xy 123.762861 57.054308) (xy 123.740124 57.062161) (xy 123.718692 57.073081) - (xy 123.705502 57.074119) (xy 123.705028 57.074283) (xy 123.704698 57.074182) (xy 123.703206 57.0743) - (xy 123.501603 57.0743) (xy 123.443412 57.055393) (xy 123.407448 57.005893) (xy 123.407448 56.944707) - (xy 123.414324 56.929786) (xy 123.41388 56.92956) (xy 123.428678 56.900518) (xy 123.497861 56.764739) - (xy 123.553821 56.592509) (xy 123.58215 56.413646) (xy 123.58215 56.232554) (xy 123.58215 56.23255) - (xy 123.553821 56.053693) (xy 123.553821 56.053691) (xy 123.497861 55.881461) (xy 123.415646 55.720106) - (xy 123.309203 55.573599) (xy 123.181151 55.445547) (xy 123.034644 55.339104) (xy 123.034643 55.339103) - (xy 123.034641 55.339102) (xy 122.873287 55.256888) (xy 122.701056 55.200928) (xy 122.522199 55.1726) - (xy 122.522196 55.1726) (xy 122.341104 55.1726) (xy 122.341101 55.1726) (xy 122.162243 55.200928) - (xy 121.990012 55.256888) (xy 121.828658 55.339102) (xy 121.776268 55.377166) (xy 121.682149 55.445547) - (xy 121.554097 55.573599) (xy 121.514212 55.628496) (xy 121.447652 55.720108) (xy 121.365438 55.881462) - (xy 121.309478 56.053693) (xy 121.28115 56.23255) (xy 121.28115 56.413649) (xy 121.309478 56.592506) - (xy 121.365438 56.764737) (xy 121.44942 56.92956) (xy 121.447753 56.930408) (xy 121.460391 56.983083) - (xy 121.436967 57.039608) (xy 121.384793 57.071568) (xy 121.361697 57.0743) (xy 120.961603 57.0743) - (xy 120.903412 57.055393) (xy 120.867448 57.005893) (xy 120.867448 56.944707) (xy 120.874324 56.929786) - (xy 120.87388 56.92956) (xy 120.888678 56.900518) (xy 120.957861 56.764739) (xy 121.013821 56.592509) - (xy 121.04215 56.413646) (xy 121.04215 56.232554) (xy 121.04215 56.23255) (xy 121.013821 56.053693) - (xy 121.013821 56.053691) (xy 120.957861 55.881461) (xy 120.875646 55.720106) (xy 120.769203 55.573599) - (xy 120.641151 55.445547) (xy 120.494644 55.339104) (xy 120.494643 55.339103) (xy 120.494641 55.339102) - (xy 120.333287 55.256888) (xy 120.161056 55.200928) (xy 119.982199 55.1726) (xy 119.982196 55.1726) - (xy 119.801104 55.1726) (xy 119.801101 55.1726) (xy 119.622243 55.200928) (xy 119.450012 55.256888) - (xy 119.288658 55.339102) (xy 119.236268 55.377166) (xy 119.142149 55.445547) (xy 119.014097 55.573599) - (xy 118.974212 55.628496) (xy 118.907652 55.720108) (xy 118.825438 55.881462) (xy 118.769478 56.053693) - (xy 118.74115 56.23255) (xy 118.74115 56.413649) (xy 118.769478 56.592506) (xy 118.825438 56.764737) - (xy 118.90942 56.92956) (xy 118.907753 56.930408) (xy 118.908882 56.935114) (xy 118.915852 56.944707) - (xy 118.915852 56.964163) (xy 118.920391 56.983083) (xy 118.915852 56.994036) (xy 118.915852 57.005893) - (xy 118.904415 57.021634) (xy 118.896967 57.039608) (xy 118.886856 57.045801) (xy 118.879888 57.055393) - (xy 118.861383 57.061405) (xy 118.844793 57.071568) (xy 118.821697 57.0743) (xy 118.71025 57.0743) - (xy 118.652059 57.055393) (xy 118.640246 57.045304) (xy 118.446491 56.851549) (xy 118.418714 56.797032) - (xy 118.42234 56.750953) (xy 118.473821 56.592509) (xy 118.50215 56.413646) (xy 118.50215 56.232554) - (xy 118.50215 56.23255) (xy 118.473821 56.053693) (xy 118.473821 56.053691) (xy 118.417861 55.881461) - (xy 118.335646 55.720106) (xy 118.229203 55.573599) (xy 118.101151 55.445547) (xy 117.954644 55.339104) - (xy 117.954643 55.339103) (xy 117.954641 55.339102) (xy 117.793287 55.256888) (xy 117.621056 55.200928) - (xy 117.442199 55.1726) (xy 117.442196 55.1726) (xy 117.261104 55.1726) (xy 117.261101 55.1726) - (xy 117.082243 55.200928) (xy 116.910012 55.256888) (xy 116.748658 55.339102) (xy 116.696268 55.377166) - (xy 116.602149 55.445547) (xy 116.474097 55.573599) (xy 116.434212 55.628496) (xy 116.367652 55.720108) - (xy 116.285438 55.881462) (xy 116.229478 56.053693) (xy 116.20115 56.23255) (xy 115.96215 56.23255) - (xy 115.933821 56.053693) (xy 115.933821 56.053691) (xy 115.877861 55.881461) (xy 115.795646 55.720106) - (xy 115.689203 55.573599) (xy 115.561151 55.445547) (xy 115.414644 55.339104) (xy 115.414643 55.339103) - (xy 115.414641 55.339102) (xy 115.253287 55.256888) (xy 115.081056 55.200928) (xy 114.902199 55.1726) - (xy 114.902196 55.1726) (xy 114.721104 55.1726) (xy 114.721101 55.1726) (xy 114.542243 55.200928) - (xy 114.370012 55.256888) (xy 114.208658 55.339102) (xy 114.156268 55.377166) (xy 114.062149 55.445547) - (xy 113.934097 55.573599) (xy 113.894212 55.628496) (xy 113.827652 55.720108) (xy 113.745438 55.881462) - (xy 113.689478 56.053693) (xy 113.66115 56.23255) (xy 113.42215 56.23255) (xy 113.393821 56.053693) - (xy 113.393821 56.053691) (xy 113.337861 55.881461) (xy 113.255646 55.720106) (xy 113.149203 55.573599) - (xy 113.021151 55.445547) (xy 112.874644 55.339104) (xy 112.874643 55.339103) (xy 112.874641 55.339102) - (xy 112.713287 55.256888) (xy 112.541056 55.200928) (xy 112.362199 55.1726) (xy 112.362196 55.1726) - (xy 112.181104 55.1726) (xy 112.181101 55.1726) (xy 112.002243 55.200928) (xy 111.830012 55.256888) - (xy 111.668658 55.339102) (xy 111.616268 55.377166) (xy 111.522149 55.445547) (xy 111.394097 55.573599) - (xy 111.354212 55.628496) (xy 111.287652 55.720108) (xy 111.205438 55.881462) (xy 111.149478 56.053693) - (xy 111.12115 56.23255) (xy 110.88215 56.23255) (xy 110.853821 56.053693) (xy 110.853821 56.053691) - (xy 110.797861 55.881461) (xy 110.715646 55.720106) (xy 110.609203 55.573599) (xy 110.481151 55.445547) - (xy 110.334644 55.339104) (xy 110.334643 55.339103) (xy 110.334641 55.339102) (xy 110.173287 55.256888) - (xy 110.001056 55.200928) (xy 109.822199 55.1726) (xy 109.822196 55.1726) (xy 109.641104 55.1726) - (xy 109.641101 55.1726) (xy 109.462243 55.200928) (xy 109.290012 55.256888) (xy 109.128658 55.339102) - (xy 109.076268 55.377166) (xy 108.982149 55.445547) (xy 108.854097 55.573599) (xy 108.814212 55.628496) - (xy 108.747652 55.720108) (xy 108.665438 55.881462) (xy 108.609478 56.053693) (xy 108.58115 56.23255) - (xy 108.342149 56.23255) (xy 108.342149 55.428236) (xy 108.339235 55.403109) (xy 108.293856 55.300335) - (xy 108.214415 55.220894) (xy 108.111641 55.175515) (xy 108.11164 55.175514) (xy 108.111638 55.175514) - (xy 108.086518 55.1726) (xy 106.296789 55.1726) (xy 106.296786 55.172601) (xy 106.271659 55.175514) - (xy 106.168885 55.220894) (xy 106.089444 55.300335) (xy 106.044064 55.403111) (xy 106.04115 55.42823) - (xy 98.65465 55.42823) (xy 98.65465 54.782414) (xy 98.654651 54.782401) (xy 98.654651 54.668972) - (xy 98.65465 54.66897) (xy 98.644529 54.6312) (xy 98.627357 54.567113) (xy 98.619935 54.554258) - (xy 98.619935 54.554257) (xy 98.574631 54.475789) (xy 98.57463 54.475787) (xy 98.500063 54.40122) - (xy 98.50006 54.401218) (xy 94.874963 50.77612) (xy 94.87496 50.776118) (xy 94.874958 50.776116) - (xy 94.783641 50.723394) (xy 94.783643 50.723394) (xy 94.714985 50.704998) (xy 94.681777 50.6961) - (xy 86.150877 50.6961) (xy 86.045423 50.6961) (xy 86.012215 50.704998) (xy 85.943557 50.723394) - (xy 85.852241 50.776116) (xy 85.852236 50.77612) (xy 85.514752 51.113604) (xy 85.460236 51.141381) - (xy 85.444749 51.1426) (xy 84.258543 51.1426) (xy 84.170084 51.153223) (xy 84.02931 51.208737) (xy 84.029306 51.20874) - (xy 83.908731 51.300175) (xy 83.908725 51.300181) (xy 83.81729 51.420756) (xy 83.817287 51.42076) - (xy 83.761773 51.561534) (xy 83.75115 51.649993) (xy 83.75115 52.436206) (xy 83.761773 52.524665) - (xy 83.817287 52.665439) (xy 83.817288 52.665441) (xy 83.817289 52.665442) (xy 83.908728 52.786022) - (xy 84.029308 52.877461) (xy 84.029309 52.877461) (xy 84.02931 52.877462) (xy 84.063526 52.890955) - (xy 84.170086 52.932977) (xy 84.258548 52.9436) (xy 85.444749 52.9436) (xy 85.50294 52.962507) (xy 85.514753 52.972596) - (xy 86.158254 53.616097) (xy 86.186031 53.670614) (xy 86.18725 53.686101) (xy 86.18725 55.608111) - (xy 86.168343 55.666302) (xy 86.118843 55.702266) (xy 86.076449 55.706405) (xy 86.044764 55.7026) - (xy 86.044752 55.7026) (xy 84.258548 55.7026) (xy 84.258543 55.7026) (xy 84.170084 55.713223) (xy 84.02931 55.768737) - (xy 84.029306 55.76874) (xy 83.908731 55.860175) (xy 83.908725 55.860181) (xy 83.81729 55.980756) - (xy 83.817287 55.98076) (xy 83.761773 56.121534) (xy 83.75115 56.209993) (xy 83.75115 56.830514) - (xy 83.732243 56.888705) (xy 83.722154 56.900518) (xy 82.642364 57.980307) (xy 82.642361 57.980311) - (xy 82.554759 58.111414) (xy 82.554753 58.111425) (xy 82.494413 58.257101) (xy 82.494413 58.257103) - (xy 82.46365 58.411755) (xy 80.779701 58.411755) (xy 80.766348 45.20181) (xy 83.34115 45.20181) - (xy 83.34115 45.444389) (xy 83.372811 45.684881) (xy 83.372811 45.684886) (xy 83.435594 45.919192) - (xy 83.435598 45.919205) (xy 83.528422 46.143304) (xy 83.528424 46.143308) (xy 83.528426 46.143312) - (xy 83.649714 46.353389) (xy 83.649716 46.353392) (xy 83.797379 46.545831) (xy 83.797381 46.545833) - (xy 83.797385 46.545838) (xy 83.968912 46.717365) (xy 83.968916 46.717368) (xy 83.968918 46.71737) - (xy 84.141016 46.849425) (xy 84.161361 46.865036) (xy 84.371438 46.986324) (xy 84.59555 47.079154) - (xy 84.829861 47.141938) (xy 85.070362 47.1736) (xy 85.070363 47.1736) (xy 85.312937 47.1736) (xy 85.312938 47.1736) - (xy 85.553439 47.141938) (xy 85.78775 47.079154) (xy 86.011862 46.986324) (xy 86.221939 46.865036) - (xy 86.414388 46.717365) (xy 86.585915 46.545838) (xy 86.733586 46.353389) (xy 86.789078 46.257274) - (xy 86.796717 46.244043) (xy 93.98385 46.244043) (xy 93.98385 46.402157) (xy 94.024773 46.554884) - (xy 94.10383 46.691816) (xy 94.215634 46.80362) (xy 94.352566 46.882677) (xy 94.505293 46.9236) - (xy 94.505295 46.9236) (xy 94.663405 46.9236) (xy 94.663407 46.9236) (xy 94.816134 46.882677) (xy 94.953066 46.80362) - (xy 94.990956 46.76573) (xy 95.004091 46.752596) (xy 95.058608 46.724819) (xy 95.074094 46.7236) - (xy 96.94215 46.7236) (xy 97.000341 46.742507) (xy 97.036305 46.792007) (xy 97.04115 46.8226) (xy 97.04115 47.091206) - (xy 97.051773 47.179665) (xy 97.107287 47.320439) (xy 97.107288 47.320441) (xy 97.107289 47.320442) - (xy 97.198728 47.441022) (xy 97.319308 47.532461) (xy 97.319309 47.532461) (xy 97.31931 47.532462) - (xy 97.3577 47.547601) (xy 97.460086 47.587977) (xy 97.548548 47.5986) (xy 97.54855 47.5986) (xy 98.83475 47.5986) - (xy 98.834752 47.5986) (xy 98.923214 47.587977) (xy 99.063992 47.532461) (xy 99.184572 47.441022) - (xy 99.276011 47.320442) (xy 99.331527 47.179664) (xy 99.334262 47.156882) (xy 99.359971 47.101362) - (xy 99.413406 47.071556) (xy 99.474155 47.07885) (xy 99.519014 47.120458) (xy 99.520765 47.12374) - (xy 99.537023 47.155648) (xy 99.537024 47.15565) (xy 99.661927 47.327564) (xy 99.812185 47.477822) + (xy 195.272219 56.573099) (xy 195.348146 56.468594) (xy 195.430361 56.307239) (xy 195.486321 56.135009) + (xy 195.50302 56.029575) (xy 195.51465 55.956149) (xy 195.51465 55.77505) (xy 195.490059 55.61979) + (xy 195.486321 55.596191) (xy 195.430361 55.423961) (xy 195.348146 55.262606) (xy 195.241703 55.116099) + (xy 195.113651 54.988047) (xy 194.967144 54.881604) (xy 194.967143 54.881603) (xy 194.967141 54.881602) + (xy 194.805787 54.799388) (xy 194.633556 54.743428) (xy 194.454699 54.7151) (xy 194.454696 54.7151) + (xy 194.273604 54.7151) (xy 194.273601 54.7151) (xy 194.094743 54.743428) (xy 193.922512 54.799388) + (xy 193.761158 54.881602) (xy 193.70071 54.92552) (xy 193.614649 54.988047) (xy 193.486597 55.116099) + (xy 193.445362 55.172854) (xy 193.380152 55.262608) (xy 193.297938 55.423962) (xy 193.241978 55.596193) + (xy 193.21365 55.77505) (xy 190.43465 55.77505) (xy 190.43465 54.85078) (xy 190.434649 54.850772) + (xy 190.425917 54.806879) (xy 190.425915 54.806875) (xy 190.392655 54.757098) (xy 190.392654 54.757096) + (xy 190.372198 54.743428) (xy 190.342874 54.723834) (xy 190.34287 54.723832) (xy 190.298977 54.7151) + (xy 190.29897 54.7151) (xy 188.26933 54.7151) (xy 188.269322 54.7151) (xy 188.225429 54.723832) + (xy 188.225425 54.723834) (xy 188.175648 54.757094) (xy 188.175644 54.757098) (xy 188.142384 54.806875) + (xy 188.142382 54.806879) (xy 188.13365 54.850772) (xy 188.13365 56.8675) (xy 188.114743 56.925691) + (xy 188.065243 56.961655) (xy 188.03465 56.9665) (xy 169.559055 56.9665) (xy 169.430742 56.992024) + (xy 169.385084 57.001106) (xy 169.385082 57.001106) (xy 169.221205 57.068985) (xy 169.221204 57.068985) + (xy 169.073715 57.167535) (xy 167.492183 58.749067) (xy 167.393637 58.896553) (xy 167.325756 59.06043) + (xy 167.325754 59.060436) (xy 167.29115 59.234405) (xy 167.29115 59.411794) (xy 167.325754 59.585763) + (xy 167.325756 59.585769) (xy 167.393637 59.749646) (xy 167.492183 59.897132) (xy 167.492186 59.897136) + (xy 167.617614 60.022564) (xy 167.765103 60.121112) (xy 167.928984 60.188995) (xy 168.102958 60.2236) + (xy 168.102959 60.2236) (xy 168.280341 60.2236) (xy 168.280342 60.2236) (xy 168.454316 60.188995) + (xy 168.618197 60.121112) (xy 168.765686 60.022564) (xy 169.991753 58.796495) (xy 170.04627 58.768719) + (xy 170.061757 58.7675) (xy 172.75509 58.7675) (xy 172.761905 58.769714) (xy 172.768964 58.768477) + (xy 172.790488 58.779001) (xy 172.813281 58.786407) (xy 172.817493 58.792205) (xy 172.823931 58.795353) + (xy 172.835158 58.816519) (xy 172.849245 58.835907) (xy 172.849245 58.843073) (xy 172.852603 58.849404) + (xy 172.849245 58.873128) (xy 172.849245 58.897093) (xy 172.844028 58.909986) (xy 172.836179 58.926039) + (xy 172.817245 58.952557) (xy 170.6896 61.080204) (xy 170.635083 61.107981) (xy 170.619596 61.1092) + (xy 163.40238 61.1092) (xy 163.344568 61.1207) (xy 163.280944 61.133355) (xy 163.276713 61.134197) + (xy 163.276704 61.134199) (xy 163.158325 61.183233) (xy 163.051784 61.25442) (xy 162.3593 61.946904) + (xy 162.352182 61.95053) (xy 162.347487 61.956993) (xy 162.325438 61.964156) (xy 162.304783 61.974681) + (xy 162.289296 61.9759) (xy 162.100261 61.9759) (xy 162.04207 61.956993) (xy 162.006106 61.907493) + (xy 162.006106 61.846307) (xy 162.014525 61.827399) (xy 162.015613 61.825514) (xy 162.062049 61.745086) + (xy 162.09275 61.630509) (xy 162.09275 61.515968) (xy 162.111657 61.457777) (xy 162.121746 61.445964) + (xy 162.665619 60.902091) (xy 163.254014 60.313697) (xy 163.29215 60.221628) (xy 163.29215 60.121973) + (xy 163.29215 60.025352) (xy 163.311057 59.967161) (xy 163.34767 59.936411) (xy 163.36996 59.925514) + (xy 163.448133 59.887298) (xy 163.530848 59.804583) (xy 163.582223 59.699493) (xy 163.59215 59.63136) + (xy 163.59215 59.01484) (xy 163.582223 58.946707) (xy 163.579372 58.940876) (xy 163.566273 58.91408) + (xy 163.557702 58.853498) (xy 163.586377 58.799449) (xy 163.641346 58.772576) (xy 163.655214 58.7716) + (xy 164.078086 58.7716) (xy 164.136277 58.790507) (xy 164.172241 58.840007) (xy 164.172241 58.901193) + (xy 164.167027 58.91408) (xy 164.151077 58.946704) (xy 164.148817 58.962219) (xy 164.14115 59.01484) + (xy 164.14115 59.63136) (xy 164.144307 59.653027) (xy 164.151077 59.699495) (xy 164.198745 59.797001) + (xy 164.202452 59.804583) (xy 164.223606 59.825737) (xy 164.251382 59.880252) (xy 164.241811 59.940684) + (xy 164.223605 59.965742) (xy 164.140861 60.048486) (xy 164.140857 60.048491) (xy 164.081552 60.151209) + (xy 164.068345 60.2005) (xy 164.05085 60.265791) (xy 164.05085 60.384409) (xy 164.070328 60.4571) + (xy 164.081552 60.49899) (xy 164.140857 60.601708) (xy 164.140859 60.60171) (xy 164.140861 60.601713) + (xy 164.224737 60.685589) (xy 164.224739 60.68559) (xy 164.224741 60.685592) (xy 164.32746 60.744897) + (xy 164.327461 60.744897) (xy 164.327464 60.744899) (xy 164.442041 60.7756) (xy 164.442043 60.7756) + (xy 164.560657 60.7756) (xy 164.560659 60.7756) (xy 164.675236 60.744899) (xy 164.675238 60.744897) + (xy 164.67524 60.744897) (xy 164.777958 60.685592) (xy 164.777958 60.685591) (xy 164.777963 60.685589) + (xy 164.861839 60.601713) (xy 164.865686 60.59505) (xy 164.921147 60.49899) (xy 164.921147 60.498988) + (xy 164.921149 60.498986) (xy 164.95185 60.384409) (xy 164.95185 60.265791) (xy 164.94299 60.232726) + (xy 164.939627 60.205728) (xy 164.939843 60.190196) (xy 164.94215 60.184628) (xy 164.94215 60.024689) + (xy 164.94216 60.023972) (xy 164.951798 59.995656) (xy 164.961057 59.967161) (xy 164.961674 59.966642) + (xy 164.961876 59.966051) (xy 164.965017 59.963834) (xy 164.99767 59.936411) (xy 165.01996 59.925514) + (xy 165.098133 59.887298) (xy 165.180848 59.804583) (xy 165.232223 59.699493) (xy 165.24215 59.63136) + (xy 165.24215 59.01484) (xy 165.232223 58.946707) (xy 165.229372 58.940876) (xy 165.216273 58.91408) + (xy 165.207702 58.853498) (xy 165.236377 58.799449) (xy 165.291346 58.772576) (xy 165.305214 58.7716) + (xy 165.594881 58.7716) (xy 165.653072 58.790507) (xy 165.664885 58.800596) (xy 165.962154 59.097865) + (xy 165.989931 59.152382) (xy 165.99115 59.167869) (xy 165.99115 59.63136) (xy 165.994307 59.653027) + (xy 166.001077 59.699495) (xy 166.048745 59.797001) (xy 166.052452 59.804583) (xy 166.135167 59.887298) + (xy 166.168704 59.903693) (xy 166.240254 59.938672) (xy 166.240255 59.938672) (xy 166.240257 59.938673) + (xy 166.30839 59.9486) (xy 166.308393 59.9486) (xy 166.774907 59.9486) (xy 166.77491 59.9486) (xy 166.843043 59.938673) + (xy 166.948133 59.887298) (xy 167.030848 59.804583) (xy 167.082223 59.699493) (xy 167.09215 59.63136) + (xy 167.09215 59.01484) (xy 167.082223 58.946707) (xy 167.079372 58.940876) (xy 167.048241 58.877196) + (xy 167.030848 58.841617) (xy 166.948133 58.758902) (xy 166.928009 58.749064) (xy 166.843045 58.707527) + (xy 166.808053 58.702429) (xy 166.77491 58.6976) (xy 166.311419 58.6976) (xy 166.253228 58.678693) + (xy 166.241416 58.668604) (xy 165.881546 58.308735) (xy 165.789479 58.2706) (xy 165.789478 58.2706) + (xy 162.140382 58.2706) (xy 162.135267 58.268938) (xy 162.130005 58.270055) (xy 162.10658 58.259617) + (xy 162.082191 58.251693) (xy 162.079029 58.247341) (xy 162.074116 58.245152) (xy 162.0613 58.222939) + (xy 162.046227 58.202193) (xy 162.046227 58.196813) (xy 162.043539 58.192155) (xy 162.046227 58.166654) + (xy 162.046227 58.141007) (xy 162.049389 58.136654) (xy 162.049953 58.131307) (xy 162.06131 58.120245) + (xy 162.082191 58.091507) (xy 162.090907 58.085849) (xy 162.096514 58.082613) (xy 162.117877 58.073765) + (xy 162.153287 58.050105) (xy 162.224419 58.002577) (xy 165.194927 55.032069) (xy 165.266116 54.925526) + (xy 165.284309 54.881602) (xy 165.297076 54.850781) (xy 165.297076 54.85078) (xy 165.297079 54.850772) + (xy 165.315151 54.807144) (xy 165.34015 54.681469) (xy 165.34015 54.404054) (xy 165.359057 54.345863) + (xy 165.369146 54.334051) (xy 165.504684 54.198512) (xy 165.559201 54.170734) (xy 165.619633 54.180305) + (xy 165.662897 54.22357) (xy 165.672469 54.284002) (xy 165.665253 54.308503) (xy 165.619064 54.413111) + (xy 165.61615 54.43823) (xy 165.61615 54.82796) (xy 165.616151 54.827963) (xy 165.619064 54.85309) + (xy 165.644406 54.910485) (xy 165.664444 54.955865) (xy 165.743885 55.035306) (xy 165.846659 55.080685) + (xy 165.871785 55.0836) (xy 166.256719 55.083599) (xy 166.314909 55.102506) (xy 166.350873 55.152006) + (xy 166.350873 55.213191) (xy 166.342455 55.232098) (xy 166.321952 55.26761) (xy 166.321951 55.267614) + (xy 166.29125 55.382191) (xy 166.29125 55.500809) (xy 166.305059 55.552343) (xy 166.321952 55.61539) + (xy 166.381257 55.718108) (xy 166.381259 55.71811) (xy 166.381261 55.718113) (xy 166.465137 55.801989) + (xy 166.465139 55.80199) (xy 166.465141 55.801992) (xy 166.56786 55.861297) (xy 166.567861 55.861297) + (xy 166.567864 55.861299) (xy 166.682441 55.892) (xy 166.682443 55.892) (xy 166.801057 55.892) (xy 166.801059 55.892) + (xy 166.915636 55.861299) (xy 166.915638 55.861297) (xy 166.91564 55.861297) (xy 167.018358 55.801992) + (xy 167.018358 55.801991) (xy 167.018363 55.801989) (xy 167.102239 55.718113) (xy 167.119867 55.687581) + (xy 167.161547 55.61539) (xy 167.161547 55.615388) (xy 167.161549 55.615386) (xy 167.19225 55.500809) + (xy 167.19225 55.382191) (xy 167.161549 55.267614) (xy 167.161547 55.26761) (xy 167.161547 55.267609) + (xy 167.141045 55.232099) (xy 167.128323 55.172251) (xy 167.153209 55.116355) (xy 167.206197 55.085762) + (xy 167.226781 55.083599) (xy 167.611511 55.083599) (xy 167.611514 55.083599) (xy 167.636641 55.080685) + (xy 167.739415 55.035306) (xy 167.818856 54.955865) (xy 167.864235 54.853091) (xy 167.86715 54.827965) + (xy 167.867149 54.438236) (xy 167.864235 54.413109) (xy 167.818856 54.310335) (xy 167.739415 54.230894) + (xy 167.636641 54.185515) (xy 167.63664 54.185514) (xy 167.636638 54.185514) (xy 167.611519 54.1826) + (xy 166.790774 54.1826) (xy 166.732583 54.163693) (xy 166.696619 54.114193) (xy 166.696619 54.053007) + (xy 166.732583 54.003507) (xy 166.741257 53.997874) (xy 166.749371 53.99319) (xy 166.83334 53.909221) + (xy 166.83334 53.90922) (xy 166.899965 53.842595) (xy 166.954482 53.814818) (xy 166.969969 53.813599) + (xy 167.611511 53.813599) (xy 167.611514 53.813599) (xy 167.636641 53.810685) (xy 167.739415 53.765306) + (xy 167.818856 53.685865) (xy 167.864235 53.583091) (xy 167.86715 53.557965) (xy 167.867149 53.168236) + (xy 167.864235 53.143109) (xy 167.818856 53.040335) (xy 167.739415 52.960894) (xy 167.636641 52.915515) + (xy 167.63664 52.915514) (xy 167.636638 52.915514) (xy 167.611519 52.9126) (xy 167.611515 52.9126) + (xy 166.802892 52.9126) (xy 166.801025 52.9121) (xy 166.682275 52.9121) (xy 166.680406 52.9126) + (xy 165.871789 52.9126) (xy 165.871786 52.912601) (xy 165.846659 52.915514) (xy 165.743885 52.960894) + (xy 165.664443 53.040336) (xy 165.659967 53.050474) (xy 165.619166 53.096069) (xy 165.559357 53.108974) + (xy 165.514403 53.092801) (xy 165.459079 53.055835) (xy 165.340697 53.0068) (xy 165.340695 53.006799) + (xy 165.340694 53.006799) (xy 165.215019 52.9818) (xy 165.127618 52.9818) (xy 165.069427 52.962893) + (xy 165.033463 52.913393) (xy 165.033463 52.852207) (xy 165.057615 52.812796) (xy 165.497816 52.372596) + (xy 165.504932 52.36897) (xy 165.509628 52.362507) (xy 165.531677 52.355342) (xy 165.552332 52.344819) + (xy 165.567819 52.3436) (xy 165.568028 52.3436) (xy 165.626219 52.362507) (xy 165.658592 52.402612) + (xy 165.664444 52.415865) (xy 165.743885 52.495306) (xy 165.846659 52.540685) (xy 165.871785 52.5436) + (xy 167.611514 52.543599) (xy 167.636641 52.540685) (xy 167.739415 52.495306) (xy 167.818856 52.415865) + (xy 167.864235 52.313091) (xy 167.86715 52.287965) (xy 167.867149 51.898236) (xy 167.864235 51.873109) + (xy 167.818856 51.770335) (xy 167.787182 51.738661) (xy 167.759407 51.684147) (xy 167.768978 51.623715) + (xy 167.812243 51.58045) (xy 167.821163 51.576919) (xy 167.821135 51.576854) (xy 167.826851 51.57438) + (xy 167.968202 51.490785) (xy 168.084335 51.374652) (xy 168.16793 51.233301) (xy 168.16793 51.2333) + (xy 168.213748 51.075593) (xy 168.21375 51.075586) (xy 168.213946 51.0731) (xy 165.269354 51.0731) + (xy 165.269549 51.075586) (xy 165.269551 51.075593) (xy 165.315369 51.2333) (xy 165.315369 51.233301) + (xy 165.398964 51.374652) (xy 165.515097 51.490785) (xy 165.656448 51.57438) (xy 165.658991 51.57548) + (xy 165.65961 51.5755) (xy 165.660335 51.576062) (xy 165.662165 51.576854) (xy 165.661962 51.577322) + (xy 165.681465 51.592439) (xy 165.704334 51.60798) (xy 165.705424 51.611009) (xy 165.70797 51.612982) + (xy 165.715694 51.63953) (xy 165.725062 51.665547) (xy 165.724163 51.668639) (xy 165.725063 51.671731) + (xy 165.719589 51.684387) (xy 165.707994 51.724304) (xy 165.70436 51.729308) (xy 165.700531 51.734247) + (xy 165.664444 51.770335) (xy 165.653697 51.794674) (xy 165.646277 51.804248) (xy 165.630508 51.814973) + (xy 165.617793 51.829183) (xy 165.604245 51.832835) (xy 165.595685 51.838658) (xy 165.583994 51.838295) + (xy 165.568028 51.8426) (xy 165.373221 51.8426) (xy 165.281155 51.880734) (xy 162.210684 54.951204) + (xy 162.156167 54.978981) (xy 162.14068 54.9802) (xy 161.385951 54.9802) (xy 161.38595 54.980201) + (xy 161.38595 55.630198) (xy 161.388816 55.633064) (xy 161.416593 55.687581) (xy 161.407022 55.748013) + (xy 161.388818 55.773069) (xy 161.361188 55.800701) (xy 161.306673 55.828481) (xy 161.291182 55.8297) + (xy 160.82769 55.8297) (xy 160.793623 55.834663) (xy 160.759554 55.839627) (xy 160.73503 55.851617) + (xy 160.727938 55.85262) (xy 160.722143 55.856831) (xy 160.698176 55.856831) (xy 160.674448 55.860188) + (xy 160.668121 55.856831) (xy 160.660957 55.856831) (xy 160.641566 55.842742) (xy 160.620398 55.831512) + (xy 160.617252 55.825077) (xy 160.611457 55.820867) (xy 160.604051 55.798073) (xy 160.593526 55.776544) + (xy 160.59255 55.762676) (xy 160.59255 55.714306) (xy 160.611457 55.656115) (xy 160.660957 55.620151) + (xy 160.721007 55.61979) (xy 160.733843 55.62379) (xy 160.733845 55.623791) (xy 160.804374 55.630199) + (xy 160.885949 55.630198) (xy 160.88595 55.630198) (xy 160.88595 53.830201) (xy 161.38595 53.830201) + (xy 161.38595 54.480199) (xy 161.385951 54.4802) (xy 162.110948 54.4802) (xy 162.110949 54.480199) + (xy 162.110949 54.473633) (xy 162.110948 54.473617) (xy 162.104541 54.403096) (xy 162.104539 54.40309) + (xy 162.05397 54.240807) (xy 162.053967 54.240799) (xy 161.966025 54.095327) (xy 161.845822 53.975124) + (xy 161.70035 53.887182) (xy 161.700342 53.887179) (xy 161.53806 53.83661) (xy 161.538054 53.836608) + (xy 161.467531 53.8302) (xy 161.385951 53.8302) (xy 161.38595 53.830201) (xy 160.88595 53.830201) + (xy 160.885948 53.830199) (xy 160.804384 53.8302) (xy 160.804367 53.830201) (xy 160.733846 53.836608) + (xy 160.733842 53.836609) (xy 160.721001 53.840611) (xy 160.65982 53.83987) (xy 160.610759 53.80331) + (xy 160.59255 53.746093) (xy 160.59255 53.008153) (xy 160.611457 52.949962) (xy 160.62154 52.938155) + (xy 161.693637 51.866057) (xy 161.743121 51.840844) (xy 161.742933 51.840234) (xy 161.746458 51.839144) + (xy 161.748152 51.838282) (xy 161.74922 51.838119) (xy 161.750275 51.837966) (xy 161.862861 51.782926) + (xy 161.912876 51.73291) (xy 161.96739 51.705134) (xy 162.027822 51.714705) (xy 162.071087 51.757969) + (xy 162.076853 51.771775) (xy 162.080104 51.781587) (xy 162.169075 51.925829) (xy 162.28892 52.045674) + (xy 162.433162 52.134645) (xy 162.594046 52.187956) (xy 162.693326 52.198099) (xy 162.71665 52.198098) + (xy 162.71665 51.473101) (xy 163.21665 51.473101) (xy 163.21665 52.198098) (xy 163.216651 52.198099) + (xy 163.239972 52.198099) (xy 163.339247 52.187957) (xy 163.339259 52.187954) (xy 163.500137 52.134645) + (xy 163.644379 52.045674) (xy 163.764224 51.925829) (xy 163.853195 51.781587) (xy 163.906506 51.620703) + (xy 163.91665 51.521423) (xy 163.91665 51.473101) (xy 163.916649 51.4731) (xy 163.216651 51.4731) + (xy 163.21665 51.473101) (xy 162.71665 51.473101) (xy 162.71665 50.248101) (xy 163.21665 50.248101) + (xy 163.21665 50.973099) (xy 163.216651 50.9731) (xy 163.916648 50.9731) (xy 163.916649 50.973099) + (xy 163.916649 50.924777) (xy 163.906507 50.825502) (xy 163.906504 50.82549) (xy 163.853195 50.664614) + (xy 163.850643 50.660475) (xy 163.850642 50.660472) (xy 163.796749 50.5731) (xy 165.269354 50.5731) + (xy 166.491649 50.5731) (xy 166.49165 50.573099) (xy 166.49165 50.023101) (xy 166.99165 50.023101) + (xy 166.99165 50.573099) (xy 166.991651 50.5731) (xy 168.213945 50.5731) (xy 168.21375 50.570613) + (xy 168.213748 50.570606) (xy 168.16793 50.412899) (xy 168.16793 50.412898) (xy 168.084335 50.271547) + (xy 167.968202 50.155414) (xy 167.82685 50.071819) (xy 167.669139 50.025999) (xy 167.632287 50.0231) + (xy 166.991651 50.0231) (xy 166.99165 50.023101) (xy 166.49165 50.023101) (xy 166.491649 50.0231) + (xy 165.851013 50.0231) (xy 165.81416 50.025999) (xy 165.656449 50.071819) (xy 165.656448 50.071819) + (xy 165.515097 50.155414) (xy 165.398964 50.271547) (xy 165.315369 50.412898) (xy 165.315369 50.412899) + (xy 165.269551 50.570606) (xy 165.269549 50.570613) (xy 165.269354 50.5731) (xy 163.796749 50.5731) + (xy 163.764224 50.52037) (xy 163.644379 50.400525) (xy 163.500137 50.311554) (xy 163.339253 50.258243) + (xy 163.239973 50.2481) (xy 163.216651 50.2481) (xy 163.21665 50.248101) (xy 162.71665 50.248101) + (xy 162.71665 50.2481) (xy 162.716649 50.248099) (xy 162.693339 50.2481) (xy 162.693334 50.248101) + (xy 162.594051 50.258242) (xy 162.59404 50.258245) (xy 162.433162 50.311554) (xy 162.28892 50.400525) + (xy 162.288919 50.400526) (xy 162.236154 50.453292) (xy 162.181637 50.481069) (xy 162.121205 50.471498) + (xy 162.07794 50.428233) (xy 162.06715 50.383288) (xy 162.06715 47.597599) (xy 162.086057 47.539408) + (xy 162.135557 47.503444) (xy 162.16615 47.498599) (xy 162.823171 47.498599) (xy 162.823172 47.498598) + (xy 162.870061 47.491172) (xy 162.916949 47.483747) (xy 162.916949 47.483746) (xy 162.916954 47.483746) + (xy 163.029992 47.42615) (xy 163.1197 47.336442) (xy 163.177296 47.223404) (xy 163.19215 47.129619) + (xy 163.192149 46.416582) (xy 163.192148 46.416578) (xy 163.192148 46.416576) (xy 163.177297 46.3228) + (xy 163.177296 46.322798) (xy 163.177296 46.322796) (xy 163.1197 46.209758) (xy 163.029992 46.12005) + (xy 162.916954 46.062454) (xy 162.916955 46.062454) (xy 162.823171 46.0476) (xy 160.560128 46.0476) + (xy 160.560126 46.047601) (xy 160.46635 46.062452) (xy 160.466345 46.062454) (xy 160.353309 46.120049) + (xy 160.263599 46.209759) (xy 160.206004 46.322795) (xy 160.19115 46.416578) (xy 160.19115 47.12962) + (xy 160.191151 47.129623) (xy 160.206002 47.223399) (xy 160.206004 47.223404) (xy 160.2636 47.336442) + (xy 160.353308 47.42615) (xy 160.466346 47.483746) (xy 160.560131 47.4986) (xy 160.66715 47.498599) + (xy 160.72534 47.517506) (xy 160.761304 47.567005) (xy 160.76615 47.597599) (xy 160.76615 50.912646) + (xy 160.747243 50.970837) (xy 160.737154 50.98265) (xy 159.43677 52.283034) (xy 159.396303 52.3436) + (xy 159.365584 52.389573) (xy 159.31655 52.507952) (xy 159.316549 52.507955) (xy 159.316549 52.507956) + (xy 159.314472 52.518399) (xy 159.29155 52.63363) (xy 159.29155 57.186846) (xy 159.272643 57.245037) + (xy 159.262554 57.25685) (xy 158.77357 57.745834) (xy 158.705301 57.848009) (xy 158.702385 57.852371) + (xy 158.65335 57.970752) (xy 158.653349 57.970757) (xy 158.62835 58.09643) (xy 158.62835 62.017771) + (xy 158.648909 62.121125) (xy 158.648908 62.121125) (xy 158.653347 62.143438) (xy 158.653348 62.143442) + (xy 158.702384 62.261826) (xy 158.757966 62.345011) (xy 158.77465 62.400012) (xy 158.77465 62.714395) + (xy 158.755743 62.772586) (xy 158.745654 62.784399) (xy 157.619504 63.910549) (xy 157.564987 63.938326) + (xy 157.504555 63.928755) (xy 157.46129 63.88549) (xy 157.4505 63.840545) (xy 157.4505 63.010453) + (xy 157.469407 62.952262) (xy 157.47949 62.940455) (xy 157.550426 62.86952) (xy 157.621615 62.762977) + (xy 157.670651 62.644594) (xy 157.672373 62.635934) (xy 157.672375 62.635931) (xy 157.672374 62.635931) + (xy 157.69565 62.518919) (xy 157.69565 53.512531) (xy 157.670651 53.386856) (xy 157.644035 53.3226) + (xy 157.621616 53.268474) (xy 157.61846 53.263751) (xy 157.550429 53.161934) (xy 157.550427 53.161931) + (xy 155.671145 51.282649) (xy 155.643368 51.228132) (xy 155.642149 51.212645) (xy 155.642149 49.691578) + (xy 155.642148 49.691576) (xy 155.627297 49.5978) (xy 155.627296 49.597798) (xy 155.627296 49.597796) + (xy 155.5697 49.484758) (xy 155.479992 49.39505) (xy 155.366954 49.337454) (xy 155.366955 49.337454) + (xy 155.273171 49.3226) (xy 154.110128 49.3226) (xy 154.110126 49.322601) (xy 154.01635 49.337452) + (xy 154.016345 49.337454) (xy 153.903309 49.395049) (xy 153.813599 49.484759) (xy 153.756004 49.597795) + (xy 153.74115 49.691578) (xy 153.74115 52.754621) (xy 153.741151 52.754623) (xy 153.756002 52.848399) + (xy 153.756004 52.848404) (xy 153.8136 52.961442) (xy 153.903308 53.05115) (xy 154.016346 53.108746) + (xy 154.110131 53.1236) (xy 155.273168 53.123599) (xy 155.273171 53.123599) (xy 155.273172 53.123598) + (xy 155.341912 53.112712) (xy 155.366949 53.108747) (xy 155.366949 53.108746) (xy 155.366954 53.108746) + (xy 155.479992 53.05115) (xy 155.480001 53.05114) (xy 155.480944 53.050457) (xy 155.482069 53.050091) + (xy 155.486933 53.047613) (xy 155.487325 53.048382) (xy 155.539133 53.031545) (xy 155.597326 53.050448) + (xy 155.609145 53.060541) (xy 156.365654 53.81705) (xy 156.393431 53.871567) (xy 156.39465 53.887054) + (xy 156.39465 55.612171) (xy 156.375743 55.670362) (xy 156.326243 55.706326) (xy 156.265057 55.706326) + (xy 156.225647 55.682175) (xy 156.089432 55.545961) (xy 156.085119 55.543079) (xy 156.070119 55.530769) + (xy 154.3564 53.81705) (xy 152.642086 52.102736) (xy 152.635894 52.098599) (xy 152.553091 52.043272) + (xy 152.553091 52.043271) (xy 152.54209 52.035921) (xy 152.538411 52.033463) (xy 152.500531 51.985415) + (xy 152.498127 51.924277) (xy 152.523406 51.881145) (xy 152.577439 51.827113) (xy 152.577442 51.827108) + (xy 152.636747 51.72439) (xy 152.636747 51.724388) (xy 152.636749 51.724386) (xy 152.66745 51.609809) + (xy 152.66745 51.491191) (xy 152.636749 51.376614) (xy 152.636747 51.376611) (xy 152.636747 51.376609) + (xy 152.577442 51.273891) (xy 152.577438 51.273886) (xy 152.496446 51.192893) (xy 152.468669 51.138376) + (xy 152.46745 51.12289) (xy 152.46745 49.161071) (xy 152.429315 49.069005) (xy 152.429314 49.069004) + (xy 152.429314 49.069003) (xy 152.358847 48.998536) (xy 152.358845 48.998535) (xy 151.215203 47.854893) + (xy 150.071145 46.710834) (xy 150.043368 46.656317) (xy 150.042149 46.64083) (xy 150.042149 46.073101) + (xy 153.391651 46.073101) (xy 153.391651 47.373086) (xy 153.402142 47.475787) (xy 153.402145 47.475799) + (xy 153.457293 47.642224) (xy 153.54933 47.79144) (xy 153.673309 47.915419) (xy 153.822525 48.007456) + (xy 153.988956 48.062606) (xy 154.091663 48.073099) (xy 154.441648 48.073099) (xy 154.44165 48.073098) + (xy 154.44165 46.073101) (xy 154.94165 46.073101) (xy 154.94165 48.073098) (xy 154.941651 48.073099) + (xy 155.291636 48.073099) (xy 155.394337 48.062607) (xy 155.394349 48.062604) (xy 155.560774 48.007456) + (xy 155.70999 47.915419) (xy 155.833969 47.79144) (xy 155.926006 47.642224) (xy 155.981156 47.475793) + (xy 155.99165 47.373087) (xy 155.99165 46.073101) (xy 155.991649 46.0731) (xy 154.941651 46.0731) + (xy 154.94165 46.073101) (xy 154.44165 46.073101) (xy 154.441649 46.0731) (xy 153.391652 46.0731) + (xy 153.391651 46.073101) (xy 150.042149 46.073101) (xy 150.042149 44.841578) (xy 150.042148 44.841576) + (xy 150.027297 44.7478) (xy 150.027296 44.747798) (xy 150.027296 44.747796) (xy 149.9697 44.634758) + (xy 149.879992 44.54505) (xy 149.766954 44.487454) (xy 149.766955 44.487454) (xy 149.673172 44.4726) + (xy 148.985129 44.4726) (xy 148.985126 44.472601) (xy 148.89135 44.487452) (xy 148.891345 44.487454) + (xy 148.778309 44.545049) (xy 148.688599 44.634759) (xy 148.631004 44.747795) (xy 148.61615 44.841578) + (xy 148.61615 47.804621) (xy 148.616151 47.804623) (xy 148.631002 47.898399) (xy 148.631004 47.898404) + (xy 148.6886 48.011442) (xy 148.778308 48.10115) (xy 148.891346 48.158746) (xy 148.985131 48.1736) + (xy 149.673168 48.173599) (xy 149.67317 48.173599) (xy 149.673171 48.173598) (xy 149.720061 48.166172) + (xy 149.766949 48.158747) (xy 149.766949 48.158746) (xy 149.766954 48.158746) (xy 149.879992 48.10115) + (xy 149.9697 48.011442) (xy 150.027296 47.898404) (xy 150.04215 47.804619) (xy 150.042149 47.629367) + (xy 150.061056 47.571178) (xy 150.110556 47.535214) (xy 150.171741 47.535213) (xy 150.211153 47.559364) + (xy 151.937454 49.285664) (xy 151.965231 49.340181) (xy 151.96645 49.355668) (xy 151.96645 51.12289) + (xy 151.947543 51.181081) (xy 151.937454 51.192893) (xy 151.856461 51.273886) (xy 151.856457 51.273891) + (xy 151.797152 51.376609) (xy 151.782682 51.430613) (xy 151.771271 51.473201) (xy 151.76645 51.491192) + (xy 151.76645 51.522892) (xy 151.747543 51.581083) (xy 151.698043 51.617047) (xy 151.636857 51.617047) + (xy 151.597446 51.592896) (xy 145.796145 45.791595) (xy 145.768368 45.737078) (xy 145.767149 45.721591) + (xy 145.767149 44.841578) (xy 145.767148 44.841576) (xy 145.752297 44.7478) (xy 145.752296 44.747798) + (xy 145.752296 44.747796) (xy 145.6947 44.634758) (xy 145.604992 44.54505) (xy 145.491954 44.487454) + (xy 145.491955 44.487454) (xy 145.398172 44.4726) (xy 144.710129 44.4726) (xy 144.710126 44.472601) + (xy 144.61635 44.487452) (xy 144.616345 44.487454) (xy 144.503309 44.545049) (xy 144.413599 44.634759) + (xy 144.356004 44.747795) (xy 144.34115 44.841578) (xy 144.34115 45.3236) (xy 144.322243 45.381791) + (xy 144.272743 45.417755) (xy 144.24215 45.4226) (xy 138.997079 45.4226) (xy 138.938888 45.403693) + (xy 138.933306 45.398925) (xy 138.933201 45.399054) (xy 138.929435 45.395964) (xy 138.929432 45.395961) + (xy 138.802978 45.311467) (xy 138.765563 45.286467) (xy 138.583485 45.211049) (xy 138.390193 45.1726) + (xy 138.390191 45.1726) (xy 138.193109 45.1726) (xy 138.193106 45.1726) (xy 137.999815 45.211049) + (xy 137.999813 45.211049) (xy 137.817736 45.286467) (xy 137.653868 45.395961) (xy 137.653864 45.395964) + (xy 137.514514 45.535314) (xy 137.514511 45.535318) (xy 137.405017 45.699186) (xy 137.329599 45.881263) + (xy 137.329599 45.881265) (xy 137.29115 46.074556) (xy 137.29115 46.571643) (xy 137.309241 46.662589) + (xy 137.327411 46.753937) (xy 137.329599 46.764934) (xy 137.329599 46.764936) (xy 137.405017 46.947013) + (xy 137.431284 46.986324) (xy 137.514511 47.110882) (xy 137.653868 47.250239) (xy 137.817736 47.359732) + (xy 137.999815 47.435151) (xy 138.193109 47.4736) (xy 138.19311 47.4736) (xy 138.39019 47.4736) + (xy 138.390191 47.4736) (xy 138.583485 47.435151) (xy 138.765564 47.359732) (xy 138.929432 47.250239) + (xy 138.929442 47.250228) (xy 138.933201 47.247146) (xy 138.934548 47.248788) (xy 138.981592 47.224819) + (xy 138.997079 47.2236) (xy 144.242151 47.2236) (xy 144.300342 47.242507) (xy 144.336306 47.292007) + (xy 144.341151 47.3226) (xy 144.341151 47.804623) (xy 144.356002 47.898399) (xy 144.356004 47.898404) + (xy 144.4136 48.011442) (xy 144.503308 48.10115) (xy 144.616346 48.158746) (xy 144.710131 48.1736) + (xy 145.398168 48.173599) (xy 145.39817 48.173599) (xy 145.398171 48.173598) (xy 145.445061 48.166172) + (xy 145.491949 48.158747) (xy 145.49195 48.158746) (xy 145.491954 48.158746) (xy 145.510234 48.149431) + (xy 145.570663 48.139857) (xy 145.625181 48.167632) (xy 145.625185 48.167635) (xy 150.959214 53.501664) + (xy 151.01829 53.541136) (xy 151.106703 53.600213) (xy 151.188641 53.634152) (xy 151.188642 53.634153) + (xy 151.233458 53.652716) (xy 151.270584 53.668095) (xy 151.444558 53.7027) (xy 151.444559 53.7027) + (xy 151.654042 53.7027) (xy 151.712233 53.721607) (xy 151.724046 53.731696) (xy 152.806176 54.813826) + (xy 152.833953 54.868343) (xy 152.824382 54.928775) (xy 152.781117 54.97204) (xy 152.75166 54.981611) + (xy 152.595527 55.006341) (xy 152.393434 55.072004) (xy 152.204096 55.168476) (xy 152.204092 55.168478) + (xy 152.149932 55.207828) (xy 152.782241 55.840137) (xy 152.718657 55.857175) (xy 152.604643 55.923001) + (xy 152.511551 56.016093) (xy 152.445725 56.130107) (xy 152.428687 56.193691) (xy 151.796378 55.561382) + (xy 151.757028 55.615542) (xy 151.757026 55.615546) (xy 151.660554 55.804884) (xy 151.59489 56.006978) + (xy 151.563692 56.203956) (xy 151.535914 56.258473) (xy 151.481398 56.28625) (xy 151.420966 56.276679) + (xy 151.377701 56.233414) (xy 151.368813 56.207783) (xy 151.368052 56.203956) (xy 151.333701 56.031265) + (xy 151.258282 55.849186) (xy 151.148789 55.685318) (xy 151.009432 55.545961) (xy 150.882641 55.461242) + (xy 150.845563 55.436467) (xy 150.663485 55.361049) (xy 150.470193 55.3226) (xy 150.470191 55.3226) + (xy 150.273109 55.3226) (xy 150.273106 55.3226) (xy 150.079815 55.361049) (xy 150.079813 55.361049) + (xy 149.897736 55.436467) (xy 149.733868 55.545961) (xy 149.733864 55.545964) (xy 149.594514 55.685314) + (xy 149.594511 55.685318) (xy 149.485017 55.849186) (xy 149.409599 56.031263) (xy 149.409599 56.031265) + (xy 149.37115 56.224556) (xy 149.37115 56.421643) (xy 149.409599 56.614934) (xy 149.409599 56.614936) + (xy 149.485017 56.797013) (xy 149.485018 56.797014) (xy 149.594511 56.960882) (xy 149.733868 57.100239) + (xy 149.897736 57.209732) (xy 150.079815 57.285151) (xy 150.273109 57.3236) (xy 150.27311 57.3236) + (xy 150.47019 57.3236) (xy 150.470191 57.3236) (xy 150.663485 57.285151) (xy 150.845564 57.209732) + (xy 151.009432 57.100239) (xy 151.148789 56.960882) (xy 151.258282 56.797014) (xy 151.333701 56.614935) + (xy 151.368813 56.438415) (xy 151.39871 56.385032) (xy 151.454275 56.359416) (xy 151.514285 56.371353) + (xy 151.555817 56.416283) (xy 151.563692 56.442243) (xy 151.59489 56.639221) (xy 151.660554 56.841315) + (xy 151.757026 57.030653) (xy 151.75703 57.030659) (xy 151.796378 57.084816) (xy 151.796379 57.084816) + (xy 152.428687 56.452507) (xy 152.445725 56.516093) (xy 152.511551 56.630107) (xy 152.604643 56.723199) + (xy 152.718657 56.789025) (xy 152.782239 56.806062) (xy 152.149932 57.438369) (xy 152.149932 57.43837) + (xy 152.20409 57.477719) (xy 152.204096 57.477723) (xy 152.393434 57.574195) (xy 152.595528 57.639859) + (xy 152.8054 57.6731) (xy 153.0179 57.6731) (xy 153.227771 57.639859) (xy 153.429865 57.574195) + (xy 153.619206 57.47772) (xy 153.673366 57.43837) (xy 153.041058 56.806062) (xy 153.104643 56.789025) + (xy 153.218657 56.723199) (xy 153.311749 56.630107) (xy 153.377575 56.516093) (xy 153.394612 56.452508) + (xy 154.02692 57.084816) (xy 154.06627 57.030656) (xy 154.162745 56.841315) (xy 154.228409 56.639221) + (xy 154.253138 56.48309) (xy 154.260256 56.469119) (xy 154.262709 56.453632) (xy 154.273796 56.442544) + (xy 154.280915 56.428573) (xy 154.294886 56.421454) (xy 154.305974 56.410367) (xy 154.321461 56.407914) + (xy 154.335432 56.400796) (xy 154.350919 56.403248) (xy 154.366406 56.400796) (xy 154.380376 56.407914) + (xy 154.395864 56.410367) (xy 154.420923 56.428573) (xy 154.439141 56.446791) (xy 154.466235 56.49748) + (xy 154.489599 56.614936) (xy 154.565017 56.797013) (xy 154.565018 56.797014) (xy 154.674511 56.960882) + (xy 154.813868 57.100239) (xy 154.977736 57.209732) (xy 155.159815 57.285151) (xy 155.353109 57.3236) + (xy 155.35311 57.3236) (xy 155.55019 57.3236) (xy 155.550191 57.3236) (xy 155.743485 57.285151) + (xy 155.925564 57.209732) (xy 156.089432 57.100239) (xy 156.225646 56.964025) (xy 156.280163 56.936248) + (xy 156.340595 56.945819) (xy 156.38386 56.989084) (xy 156.39465 57.034029) (xy 156.39465 62.144396) + (xy 156.393497 62.147944) (xy 156.39439 62.151567) (xy 156.387241 62.167197) (xy 156.375743 62.202587) + (xy 156.371317 62.208236) (xy 156.368612 62.211441) (xy 156.294723 62.285331) (xy 156.253834 62.346527) + (xy 156.250761 62.351125) (xy 156.250756 62.351132) (xy 156.223534 62.391873) (xy 156.1745 62.510252) + (xy 156.174499 62.510255) (xy 156.174499 62.510256) (xy 156.168624 62.539793) (xy 156.1495 62.63593) + (xy 156.1495 63.1505) (xy 156.130593 63.208691) (xy 156.081093 63.244655) (xy 156.0505 63.2495) + (xy 156.03593 63.2495) (xy 155.973093 63.261999) (xy 155.910256 63.274499) (xy 155.910255 63.274499) + (xy 155.910252 63.2745) (xy 155.791873 63.323534) (xy 155.685334 63.39472) (xy 154.45955 64.620504) + (xy 154.405033 64.648281) (xy 154.389546 64.6495) (xy 154.026609 64.6495) (xy 153.968418 64.630593) + (xy 153.932454 64.581093) (xy 153.932454 64.519907) (xy 153.956603 64.480498) (xy 153.960489 64.476613) + (xy 153.962229 64.473599) (xy 154.019797 64.37389) (xy 154.019797 64.373888) (xy 154.019799 64.373886) + (xy 154.0505 64.259309) (xy 154.0505 64.140691) (xy 154.019799 64.026114) (xy 154.019797 64.026111) + (xy 154.019797 64.026109) (xy 153.960492 63.923391) (xy 153.96049 63.923389) (xy 153.960489 63.923387) + (xy 153.876613 63.839511) (xy 153.87661 63.839509) (xy 153.876608 63.839507) (xy 153.822618 63.808336) + (xy 153.781677 63.762867) (xy 153.775281 63.702016) (xy 153.805874 63.649028) (xy 153.86177 63.624142) + (xy 153.872118 63.6236) (xy 154.322391 63.6236) (xy 154.380582 63.642507) (xy 154.392388 63.65259) + (xy 154.473387 63.733589) (xy 154.473389 63.73359) (xy 154.473391 63.733592) (xy 154.57611 63.792897) + (xy 154.576111 63.792897) (xy 154.576114 63.792899) (xy 154.690691 63.8236) (xy 154.690693 63.8236) + (xy 154.809307 63.8236) (xy 154.809309 63.8236) (xy 154.923886 63.792899) (xy 154.923888 63.792897) + (xy 154.92389 63.792897) (xy 155.026608 63.733592) (xy 155.026608 63.733591) (xy 155.026613 63.733589) + (xy 155.110489 63.649713) (xy 155.110492 63.649708) (xy 155.169797 63.54699) (xy 155.169797 63.546988) + (xy 155.169799 63.546986) (xy 155.2005 63.432409) (xy 155.2005 63.313791) (xy 155.169799 63.199214) + (xy 155.169797 63.199211) (xy 155.169797 63.199209) (xy 155.110492 63.096491) (xy 155.11049 63.096489) + (xy 155.110489 63.096487) (xy 155.026613 63.012611) (xy 155.02661 63.012609) (xy 155.026608 63.012607) + (xy 154.923889 62.953302) (xy 154.92389 62.953302) (xy 154.889708 62.944143) (xy 154.809309 62.9226) + (xy 154.690691 62.9226) (xy 154.624078 62.940449) (xy 154.576109 62.953302) (xy 154.473391 63.012607) + (xy 154.47339 63.012608) (xy 154.473387 63.01261) (xy 154.473387 63.012611) (xy 154.392392 63.093605) + (xy 154.337878 63.121381) (xy 154.322391 63.1226) (xy 146.880369 63.1226) (xy 146.822178 63.103693) + (xy 146.810365 63.093604) (xy 145.340869 61.624108) (xy 145.313092 61.569591) (xy 145.322663 61.509159) + (xy 145.340865 61.484105) (xy 145.352206 61.472765) (xy 145.397585 61.369991) (xy 145.4005 61.344865) + (xy 145.400499 61.041712) (xy 145.419406 60.983523) (xy 145.468906 60.947559) (xy 145.530091 60.947558) + (xy 145.538814 60.950854) (xy 145.539802 60.951281) (xy 145.69751 60.9971) (xy 145.734363 61) (xy 146.137499 61) + (xy 146.1375 60.999999) (xy 146.1375 60.450001) (xy 146.6375 60.450001) (xy 146.6375 60.999999) + (xy 146.637501 61) (xy 147.040637 61) (xy 147.077489 60.9971) (xy 147.2352 60.95128) (xy 147.235201 60.95128) + (xy 147.376552 60.867685) (xy 147.492685 60.751552) (xy 147.57628 60.610201) (xy 147.57628 60.6102) + (xy 147.622098 60.452493) (xy 147.6221 60.452486) (xy 147.622296 60.45) (xy 146.637501 60.45) (xy 146.6375 60.450001) + (xy 146.1375 60.450001) (xy 146.137499 60.45) (xy 145.152704 60.45) (xy 145.152899 60.452486) (xy 145.152901 60.452493) + (xy 145.187877 60.57288) (xy 145.185955 60.634035) (xy 145.148454 60.682381) (xy 145.092808 60.6995) + (xy 144.457269 60.6995) (xy 144.399078 60.680593) (xy 144.387265 60.670504) (xy 143.922489 60.205728) + (xy 143.454397 59.737636) (xy 143.454395 59.737635) (xy 143.454394 59.737634) (xy 143.362329 59.6995) + (xy 143.362328 59.6995) (xy 138.648622 59.6995) (xy 138.590431 59.680593) (xy 138.558057 59.640487) + (xy 138.554026 59.631357) (xy 138.552206 59.627235) (xy 138.472765 59.547794) (xy 138.369991 59.502415) + (xy 138.36999 59.502414) (xy 138.369988 59.502414) (xy 138.344868 59.4995) (xy 137.080139 59.4995) + (xy 137.080136 59.499501) (xy 137.055009 59.502414) (xy 136.952235 59.547794) (xy 136.872794 59.627235) + (xy 136.827414 59.730011) (xy 136.8245 59.75513) (xy 136.8245 60.14486) (xy 136.824501 60.144863) + (xy 136.827414 60.16999) (xy 136.851085 60.223599) (xy 136.872794 60.272765) (xy 136.952235 60.352206) + (xy 137.055009 60.397585) (xy 137.080135 60.4005) (xy 138.344864 60.400499) (xy 138.369991 60.397585) + (xy 138.472765 60.352206) (xy 138.552206 60.272765) (xy 138.558057 60.259512) (xy 138.598857 60.213917) + (xy 138.648622 60.2005) (xy 139.137147 60.2005) (xy 139.162867 60.208856) (xy 139.189144 60.215254) + (xy 139.191651 60.218209) (xy 139.195338 60.219407) (xy 139.211235 60.241288) (xy 139.228732 60.261907) + (xy 139.229023 60.265771) (xy 139.231302 60.268907) (xy 139.231302 60.295956) (xy 139.233337 60.322918) + (xy 139.231302 60.325827) (xy 139.231302 60.330093) (xy 139.201202 60.374985) (xy 139.19687 60.37866) + (xy 139.172831 60.394723) (xy 139.144188 60.423365) (xy 139.141101 60.425985) (xy 139.116357 60.436141) + (xy 139.092531 60.448281) (xy 139.085419 60.44884) (xy 139.084498 60.449219) (xy 139.083549 60.448988) + (xy 139.077047 60.4495) (xy 138.955138 60.4495) (xy 138.955135 60.449501) (xy 138.930009 60.452414) + (xy 138.827235 60.497794) (xy 138.747794 60.577235) (xy 138.702414 60.680011) (xy 138.6995 60.70513) + (xy 138.6995 61.09486) (xy 138.699501 61.094863) (xy 138.702414 61.11999) (xy 138.723554 61.167866) + (xy 138.747794 61.222765) (xy 138.827235 61.302206) (xy 138.930009 61.347585) (xy 138.955135 61.3505) + (xy 139.077044 61.350499) (xy 139.135235 61.369406) (xy 139.147049 61.379495) (xy 143.548052 65.780498) + (xy 143.575828 65.835013) (xy 143.566257 65.895445) (xy 143.522992 65.93871) (xy 143.478047 65.9495) + (xy 104.586503 65.9495) (xy 104.528312 65.930593) (xy 104.516499 65.920504) (xy 100.808646 62.21265) + (xy 100.780869 62.158133) (xy 100.77965 62.142646) (xy 100.77965 61.83828) (xy 100.798557 61.780089) + (xy 100.83866 61.747716) (xy 100.889415 61.725306) (xy 100.968856 61.645865) (xy 101.014235 61.543091) + (xy 101.01715 61.517965) (xy 101.017149 61.190691) (xy 135.0495 61.190691) (xy 135.0495 61.309309) + (xy 135.068763 61.381199) (xy 135.080202 61.42389) (xy 135.139507 61.526608) (xy 135.139509 61.52661) + (xy 135.139511 61.526613) (xy 135.223387 61.610489) (xy 135.223389 61.61049) (xy 135.223391 61.610492) + (xy 135.32611 61.669797) (xy 135.326111 61.669797) (xy 135.326114 61.669799) (xy 135.440691 61.7005) + (xy 135.440693 61.7005) (xy 135.555231 61.7005) (xy 135.613422 61.719407) (xy 135.625235 61.729496) + (xy 135.887636 61.991897) (xy 135.887635 61.991897) (xy 135.958103 62.062364) (xy 136.050171 62.1005) + (xy 136.050172 62.1005) (xy 136.776378 62.1005) (xy 136.834569 62.119407) (xy 136.866942 62.159512) + (xy 136.872794 62.172765) (xy 136.952235 62.252206) (xy 137.055009 62.297585) (xy 137.080135 62.3005) + (xy 138.344864 62.300499) (xy 138.369991 62.297585) (xy 138.472765 62.252206) (xy 138.552206 62.172765) + (xy 138.597585 62.069991) (xy 138.6005 62.044865) (xy 138.600499 61.655136) (xy 138.597585 61.630009) + (xy 138.552206 61.527235) (xy 138.472765 61.447794) (xy 138.369991 61.402415) (xy 138.36999 61.402414) + (xy 138.369988 61.402414) (xy 138.344868 61.3995) (xy 137.080139 61.3995) (xy 137.080136 61.399501) + (xy 137.055009 61.402414) (xy 136.952235 61.447794) (xy 136.872793 61.527236) (xy 136.866943 61.540487) + (xy 136.826143 61.586083) (xy 136.776378 61.5995) (xy 136.244769 61.5995) (xy 136.186578 61.580593) + (xy 136.174765 61.570504) (xy 135.979496 61.375235) (xy 135.951719 61.320718) (xy 135.9505 61.305231) + (xy 135.9505 61.190692) (xy 135.948502 61.183235) (xy 135.919799 61.076114) (xy 135.919797 61.076111) + (xy 135.919797 61.076109) (xy 135.860492 60.973391) (xy 135.86049 60.973389) (xy 135.860489 60.973387) + (xy 135.776613 60.889511) (xy 135.77661 60.889509) (xy 135.776608 60.889507) (xy 135.673889 60.830202) + (xy 135.67389 60.830202) (xy 135.649243 60.823598) (xy 135.559309 60.7995) (xy 135.440691 60.7995) + (xy 135.379497 60.815897) (xy 135.326109 60.830202) (xy 135.223391 60.889507) (xy 135.139507 60.973391) + (xy 135.080202 61.076109) (xy 135.066239 61.128219) (xy 135.0495 61.190691) (xy 101.017149 61.190691) + (xy 101.017149 61.128236) (xy 101.014235 61.103109) (xy 100.968856 61.000335) (xy 100.889415 60.920894) + (xy 100.786641 60.875515) (xy 100.78664 60.875514) (xy 100.786638 60.875514) (xy 100.761519 60.8726) + (xy 100.761515 60.8726) (xy 100.639603 60.8726) (xy 100.581412 60.853693) (xy 100.569599 60.843604) + (xy 100.543822 60.817827) (xy 100.543819 60.817824) (xy 100.498449 60.787509) (xy 100.437283 60.746638) + (xy 100.437275 60.746634) (xy 100.318897 60.6976) (xy 100.318895 60.697599) (xy 100.318894 60.697599) + (xy 100.193219 60.6726) (xy 100.065081 60.6726) (xy 100.06508 60.6726) (xy 100.003794 60.684791) + (xy 99.939406 60.697599) (xy 99.939405 60.697599) (xy 99.939402 60.6976) (xy 99.821024 60.746634) + (xy 99.821015 60.746638) (xy 99.714482 60.817822) (xy 99.688699 60.843605) (xy 99.634182 60.871381) + (xy 99.618698 60.8726) (xy 99.496788 60.8726) (xy 99.496785 60.872601) (xy 99.471659 60.875514) + (xy 99.368885 60.920894) (xy 99.289444 61.000335) (xy 99.244064 61.103111) (xy 99.241151 61.128219) + (xy 99.24115 61.128232) (xy 99.24115 61.51796) (xy 99.241151 61.517963) (xy 99.244064 61.54309) + (xy 99.260624 61.580593) (xy 99.289444 61.645865) (xy 99.368885 61.725306) (xy 99.419639 61.747716) + (xy 99.465233 61.788514) (xy 99.47865 61.838279) (xy 99.47865 62.142646) (xy 99.476181 62.150243) + (xy 99.477431 62.158133) (xy 99.466906 62.178788) (xy 99.459743 62.200837) (xy 99.449654 62.21265) + (xy 99.311153 62.351151) (xy 99.256636 62.378928) (xy 99.196204 62.369357) (xy 99.152939 62.326092) + (xy 99.142149 62.281149) (xy 99.142149 62.078236) (xy 99.139235 62.053109) (xy 99.093856 61.950335) + (xy 99.014415 61.870894) (xy 98.911641 61.825515) (xy 98.91164 61.825514) (xy 98.911638 61.825514) + (xy 98.886518 61.8226) (xy 97.621789 61.8226) (xy 97.621786 61.822601) (xy 97.596659 61.825514) + (xy 97.493885 61.870894) (xy 97.414444 61.950335) (xy 97.369064 62.053111) (xy 97.36615 62.07823) + (xy 97.36615 62.46796) (xy 97.366151 62.467963) (xy 97.369064 62.49309) (xy 97.3928 62.546845) (xy 97.414444 62.595865) + (xy 97.493885 62.675306) (xy 97.596659 62.720685) (xy 97.621785 62.7236) (xy 98.699697 62.723599) + (xy 98.757888 62.742506) (xy 98.793852 62.792006) (xy 98.793852 62.853192) (xy 98.769701 62.892602) + (xy 98.616401 63.045903) (xy 98.561884 63.073681) (xy 98.546397 63.0749) (xy 95.152278 63.0749) + (xy 95.094087 63.055993) (xy 95.058123 63.006493) (xy 95.058123 62.945307) (xy 95.058303 62.944759) + (xy 95.081156 62.875791) (xy 95.09165 62.773087) (xy 95.09165 62.073101) (xy 95.091649 62.0731) + (xy 93.44065 62.0731) (xy 93.382459 62.054193) (xy 93.346495 62.004693) (xy 93.34165 61.9741) (xy 93.34165 61.823101) + (xy 93.341649 61.8231) (xy 93.19065 61.8231) (xy 93.132459 61.804193) (xy 93.096495 61.754693) (xy 93.09165 61.7241) + (xy 93.09165 60.173101) (xy 93.59165 60.173101) (xy 93.59165 61.573099) (xy 93.591651 61.5731) (xy 95.091648 61.5731) + (xy 95.091649 61.573099) (xy 95.091649 60.873113) (xy 95.081157 60.770412) (xy 95.081154 60.7704) + (xy 95.026006 60.603975) (xy 94.933969 60.454759) (xy 94.80999 60.33078) (xy 94.660774 60.238743) + (xy 94.494343 60.183593) (xy 94.391637 60.1731) (xy 93.591651 60.1731) (xy 93.59165 60.173101) (xy 93.09165 60.173101) + (xy 93.091649 60.1731) (xy 92.291663 60.1731) (xy 92.188962 60.183592) (xy 92.18895 60.183595) (xy 92.022525 60.238743) + (xy 91.873309 60.33078) (xy 91.74933 60.454759) (xy 91.657293 60.603975) (xy 91.602143 60.770406) + (xy 91.59165 60.873112) (xy 91.59165 61.419023) (xy 91.572743 61.477214) (xy 91.523243 61.513178) + (xy 91.462057 61.513178) (xy 91.437648 61.501338) (xy 91.378683 61.461938) (xy 91.378675 61.461934) + (xy 91.260297 61.4129) (xy 91.260295 61.412899) (xy 91.260294 61.412899) (xy 91.134619 61.3879) + (xy 90.541149 61.3879) (xy 90.482958 61.368993) (xy 90.446994 61.319493) (xy 90.442149 61.2889) + (xy 90.442149 60.891578) (xy 90.442148 60.891576) (xy 90.427297 60.7978) (xy 90.427296 60.797798) + (xy 90.427296 60.797796) (xy 90.3697 60.684758) (xy 90.279992 60.59505) (xy 90.166954 60.537454) + (xy 90.166955 60.537454) (xy 90.073172 60.5226) (xy 90.073169 60.5226) (xy 89.79115 60.5226) (xy 89.732959 60.503693) + (xy 89.696995 60.454193) (xy 89.69215 60.4236) (xy 89.69215 57.472599) (xy 89.711057 57.414408) + (xy 89.760557 57.378444) (xy 89.79115 57.373599) (xy 94.433173 57.373599) (xy 94.433174 57.373598) + (xy 94.480063 57.366172) (xy 94.526951 57.358747) (xy 94.526951 57.358746) (xy 94.526956 57.358746) + (xy 94.639993 57.30115) (xy 94.7297 57.211443) (xy 94.787296 57.098406) (xy 94.80215 57.004621) + (xy 94.802149 51.862966) (xy 94.821056 51.804776) (xy 94.870556 51.768812) (xy 94.931742 51.768812) + (xy 94.97115 51.792961) (xy 96.411116 53.232926) (xy 97.974654 54.796464) (xy 98.002431 54.850981) + (xy 98.00365 54.866468) (xy 98.00365 59.8236) (xy 97.984743 59.881791) (xy 97.935243 59.917755) + (xy 97.90465 59.9226) (xy 97.62179 59.9226) (xy 97.621785 59.922601) (xy 97.596659 59.925514) (xy 97.493885 59.970894) + (xy 97.414444 60.050335) (xy 97.369064 60.153111) (xy 97.36615 60.17823) (xy 97.36615 60.56796) + (xy 97.366151 60.567963) (xy 97.369064 60.59309) (xy 97.394406 60.650485) (xy 97.414444 60.695865) + (xy 97.493885 60.775306) (xy 97.596659 60.820685) (xy 97.621785 60.8236) (xy 98.886514 60.823599) + (xy 98.911641 60.820685) (xy 99.014415 60.775306) (xy 99.093856 60.695865) (xy 99.139235 60.593091) + (xy 99.14215 60.567965) (xy 99.142149 60.178236) (xy 99.139235 60.153109) (xy 99.093856 60.050335) + (xy 99.014415 59.970894) (xy 98.911641 59.925515) (xy 98.91164 59.925514) (xy 98.911638 59.925514) + (xy 98.886519 59.9226) (xy 98.886515 59.9226) (xy 98.60365 59.9226) (xy 98.545459 59.903693) (xy 98.509495 59.854193) + (xy 98.50465 59.8236) (xy 98.50465 59.05513) (xy 143.6245 59.05513) (xy 143.6245 59.44486) (xy 143.624501 59.444863) + (xy 143.627414 59.46999) (xy 143.644334 59.508309) (xy 143.672794 59.572765) (xy 143.752235 59.652206) + (xy 143.855009 59.697585) (xy 143.880135 59.7005) (xy 145.092807 59.700499) (xy 145.150998 59.719406) + (xy 145.186962 59.768906) (xy 145.187876 59.827118) (xy 145.152902 59.947502) (xy 145.152899 59.947513) + (xy 145.152704 59.95) (xy 146.137499 59.95) (xy 146.1375 59.949999) (xy 146.1375 59.400001) (xy 146.6375 59.400001) + (xy 146.6375 59.949999) (xy 146.637501 59.95) (xy 147.622295 59.95) (xy 147.6221 59.947513) (xy 147.622098 59.947502) + (xy 147.57628 59.789799) (xy 147.57628 59.789798) (xy 147.492685 59.648447) (xy 147.376552 59.532314) + (xy 147.2352 59.448719) (xy 147.077489 59.402899) (xy 147.040637 59.4) (xy 146.637501 59.4) (xy 146.6375 59.400001) + (xy 146.1375 59.400001) (xy 146.137499 59.4) (xy 145.734363 59.4) (xy 145.69751 59.402899) (xy 145.539798 59.448719) + (xy 145.538803 59.44915) (xy 145.538082 59.449218) (xy 145.533821 59.450456) (xy 145.533584 59.449642) + (xy 145.477888 59.454898) (xy 145.425228 59.423745) (xy 145.400937 59.367588) (xy 145.400499 59.358302) + (xy 145.400499 59.055136) (xy 145.397585 59.030009) (xy 145.352206 58.927235) (xy 145.340866 58.915895) + (xy 145.313091 58.861381) (xy 145.322662 58.800949) (xy 145.340865 58.775894) (xy 145.562265 58.554496) + (xy 145.616781 58.526719) (xy 145.632268 58.5255) (xy 148.430231 58.5255) (xy 148.488422 58.544407) + (xy 148.500235 58.554496) (xy 149.874305 59.928565) (xy 151.248935 61.303195) (xy 151.248936 61.303197) + (xy 151.319403 61.373664) (xy 151.353772 61.3879) (xy 151.411473 61.411801) (xy 151.411474 61.411801) + (xy 151.522651 61.411801) (xy 151.522659 61.4118) (xy 155.135041 61.4118) (xy 155.193232 61.430707) + (xy 155.205038 61.44079) (xy 155.286037 61.521789) (xy 155.286039 61.52179) (xy 155.286041 61.521792) + (xy 155.38876 61.581097) (xy 155.388761 61.581097) (xy 155.388764 61.581099) (xy 155.503341 61.6118) + (xy 155.503343 61.6118) (xy 155.621957 61.6118) (xy 155.621959 61.6118) (xy 155.736536 61.581099) + (xy 155.736538 61.581097) (xy 155.73654 61.581097) (xy 155.839258 61.521792) (xy 155.839258 61.521791) + (xy 155.839263 61.521789) (xy 155.923139 61.437913) (xy 155.924879 61.434899) (xy 155.982447 61.33519) + (xy 155.982447 61.335188) (xy 155.982449 61.335186) (xy 156.01315 61.220609) (xy 156.01315 61.101991) + (xy 155.982449 60.987414) (xy 155.982447 60.987411) (xy 155.982447 60.987409) (xy 155.923142 60.884691) + (xy 155.92314 60.884689) (xy 155.923139 60.884687) (xy 155.839263 60.800811) (xy 155.83926 60.800809) + (xy 155.839258 60.800807) (xy 155.736539 60.741502) (xy 155.73654 60.741502) (xy 155.723001 60.737874) + (xy 155.621959 60.7108) (xy 155.503341 60.7108) (xy 155.433217 60.729589) (xy 155.388759 60.741502) + (xy 155.286041 60.800807) (xy 155.28604 60.800808) (xy 155.286037 60.80081) (xy 155.286037 60.800811) + (xy 155.205042 60.881805) (xy 155.150528 60.909581) (xy 155.135041 60.9108) (xy 151.606068 60.9108) + (xy 151.547877 60.891893) (xy 151.536064 60.881804) (xy 150.15376 59.4995) (xy 148.716897 58.062636) + (xy 148.716895 58.062635) (xy 148.716894 58.062634) (xy 148.624829 58.0245) (xy 148.624828 58.0245) + (xy 145.537328 58.0245) (xy 145.437672 58.0245) (xy 145.437671 58.0245) (xy 145.345603 58.062635) + (xy 144.637733 58.770504) (xy 144.583217 58.798281) (xy 144.56773 58.7995) (xy 143.880139 58.7995) + (xy 143.880136 58.799501) (xy 143.855009 58.802414) (xy 143.752235 58.847794) (xy 143.672794 58.927235) + (xy 143.627414 59.030011) (xy 143.6245 59.05513) (xy 98.50465 59.05513) (xy 98.50465 55.458272) + (xy 106.19115 55.458272) (xy 106.19115 57.187927) (xy 106.199882 57.23182) (xy 106.199884 57.231824) + (xy 106.232702 57.28094) (xy 106.233146 57.281604) (xy 106.282928 57.314867) (xy 106.293977 57.317064) + (xy 106.326822 57.323599) (xy 106.326828 57.323599) (xy 106.32683 57.3236) (xy 106.326831 57.3236) + (xy 108.056469 57.3236) (xy 108.05647 57.3236) (xy 108.056471 57.323599) (xy 108.056477 57.323599) + (xy 108.078273 57.319262) (xy 108.100372 57.314867) (xy 108.150154 57.281604) (xy 108.183417 57.231822) + (xy 108.188674 57.205393) (xy 108.192149 57.187927) (xy 108.19215 57.187918) (xy 108.19215 56.224556) + (xy 108.73115 56.224556) (xy 108.73115 56.421643) (xy 108.769599 56.614934) (xy 108.769599 56.614936) + (xy 108.845017 56.797013) (xy 108.845018 56.797014) (xy 108.954511 56.960882) (xy 109.093868 57.100239) + (xy 109.257736 57.209732) (xy 109.439815 57.285151) (xy 109.633109 57.3236) (xy 109.63311 57.3236) + (xy 109.83019 57.3236) (xy 109.830191 57.3236) (xy 110.023485 57.285151) (xy 110.205564 57.209732) + (xy 110.369432 57.100239) (xy 110.508789 56.960882) (xy 110.618282 56.797014) (xy 110.693701 56.614935) + (xy 110.73215 56.421641) (xy 110.73215 56.224559) (xy 110.732149 56.224556) (xy 111.27115 56.224556) + (xy 111.27115 56.421643) (xy 111.309599 56.614934) (xy 111.309599 56.614936) (xy 111.385017 56.797013) + (xy 111.385018 56.797014) (xy 111.494511 56.960882) (xy 111.633868 57.100239) (xy 111.797736 57.209732) + (xy 111.979815 57.285151) (xy 112.173109 57.3236) (xy 112.17311 57.3236) (xy 112.37019 57.3236) + (xy 112.370191 57.3236) (xy 112.563485 57.285151) (xy 112.745564 57.209732) (xy 112.909432 57.100239) + (xy 113.048789 56.960882) (xy 113.158282 56.797014) (xy 113.233701 56.614935) (xy 113.27215 56.421641) + (xy 113.27215 56.224559) (xy 113.272149 56.224556) (xy 113.81115 56.224556) (xy 113.81115 56.421643) + (xy 113.849599 56.614934) (xy 113.849599 56.614936) (xy 113.925017 56.797013) (xy 113.925018 56.797014) + (xy 114.034511 56.960882) (xy 114.173868 57.100239) (xy 114.337736 57.209732) (xy 114.519815 57.285151) + (xy 114.713109 57.3236) (xy 114.71311 57.3236) (xy 114.91019 57.3236) (xy 114.910191 57.3236) (xy 115.103485 57.285151) + (xy 115.285564 57.209732) (xy 115.449432 57.100239) (xy 115.588789 56.960882) (xy 115.698282 56.797014) + (xy 115.773701 56.614935) (xy 115.81215 56.421641) (xy 115.81215 56.224559) (xy 115.812149 56.224556) + (xy 116.35115 56.224556) (xy 116.35115 56.421643) (xy 116.389599 56.614934) (xy 116.389599 56.614936) + (xy 116.465017 56.797013) (xy 116.465018 56.797014) (xy 116.574511 56.960882) (xy 116.713868 57.100239) + (xy 116.877736 57.209732) (xy 117.059815 57.285151) (xy 117.253109 57.3236) (xy 117.25311 57.3236) + (xy 117.45019 57.3236) (xy 117.450191 57.3236) (xy 117.643485 57.285151) (xy 117.805787 57.217923) + (xy 117.866781 57.213123) (xy 117.913673 57.239384) (xy 118.285339 57.611049) (xy 118.285342 57.611053) + (xy 118.285343 57.611053) (xy 118.290985 57.616695) (xy 118.290986 57.616697) (xy 118.361453 57.687164) + (xy 118.361454 57.687164) (xy 118.361455 57.687165) (xy 118.388418 57.698334) (xy 118.388419 57.698334) + (xy 118.453522 57.725301) (xy 118.453523 57.725301) (xy 118.564701 57.725301) (xy 118.564709 57.7253) + (xy 123.765341 57.7253) (xy 123.823532 57.744207) (xy 123.835338 57.75429) (xy 123.916337 57.835289) + (xy 123.916339 57.83529) (xy 123.916341 57.835292) (xy 124.01906 57.894597) (xy 124.019061 57.894597) + (xy 124.019064 57.894599) (xy 124.133641 57.9253) (xy 124.133643 57.9253) (xy 124.252257 57.9253) + (xy 124.252259 57.9253) (xy 124.366836 57.894599) (xy 124.366838 57.894597) (xy 124.36684 57.894597) + (xy 124.469558 57.835292) (xy 124.469558 57.835291) (xy 124.469563 57.835289) (xy 124.553439 57.751413) + (xy 124.556662 57.745831) (xy 124.612747 57.64869) (xy 124.612747 57.648688) (xy 124.612749 57.648686) + (xy 124.64345 57.534109) (xy 124.64345 57.415491) (xy 124.643449 57.415488) (xy 124.642884 57.411198) + (xy 124.654029 57.351036) (xy 124.698409 57.308915) (xy 124.75907 57.300924) (xy 124.760236 57.301148) + (xy 124.873109 57.3236) (xy 124.87311 57.3236) (xy 125.07019 57.3236) (xy 125.070191 57.3236) (xy 125.263485 57.285151) + (xy 125.445564 57.209732) (xy 125.609432 57.100239) (xy 125.748789 56.960882) (xy 125.858282 56.797014) + (xy 125.933701 56.614935) (xy 125.97215 56.421641) (xy 125.97215 56.224559) (xy 125.972149 56.224556) + (xy 126.51115 56.224556) (xy 126.51115 56.421643) (xy 126.549599 56.614934) (xy 126.549599 56.614936) + (xy 126.625017 56.797013) (xy 126.625018 56.797014) (xy 126.734511 56.960882) (xy 126.873868 57.100239) + (xy 127.037736 57.209732) (xy 127.219815 57.285151) (xy 127.413109 57.3236) (xy 127.41311 57.3236) + (xy 127.61019 57.3236) (xy 127.610191 57.3236) (xy 127.803485 57.285151) (xy 127.985564 57.209732) + (xy 128.149432 57.100239) (xy 128.288789 56.960882) (xy 128.398282 56.797014) (xy 128.473701 56.614935) + (xy 128.51215 56.421641) (xy 128.51215 56.224559) (xy 128.512149 56.224556) (xy 129.05115 56.224556) + (xy 129.05115 56.421643) (xy 129.089599 56.614934) (xy 129.089599 56.614936) (xy 129.165017 56.797013) + (xy 129.165018 56.797014) (xy 129.274511 56.960882) (xy 129.413868 57.100239) (xy 129.577736 57.209732) + (xy 129.759815 57.285151) (xy 129.953109 57.3236) (xy 129.95311 57.3236) (xy 130.15019 57.3236) + (xy 130.150191 57.3236) (xy 130.343485 57.285151) (xy 130.525564 57.209732) (xy 130.689432 57.100239) + (xy 130.828789 56.960882) (xy 130.938282 56.797014) (xy 131.013701 56.614935) (xy 131.05215 56.421641) + (xy 131.05215 56.224559) (xy 131.052149 56.224556) (xy 131.59115 56.224556) (xy 131.59115 56.421643) + (xy 131.629599 56.614934) (xy 131.629599 56.614936) (xy 131.705017 56.797013) (xy 131.705018 56.797014) + (xy 131.814511 56.960882) (xy 131.953868 57.100239) (xy 132.117736 57.209732) (xy 132.299815 57.285151) + (xy 132.493109 57.3236) (xy 132.49311 57.3236) (xy 132.69019 57.3236) (xy 132.690191 57.3236) (xy 132.883485 57.285151) + (xy 133.065564 57.209732) (xy 133.229432 57.100239) (xy 133.368789 56.960882) (xy 133.478282 56.797014) + (xy 133.553701 56.614935) (xy 133.59215 56.421641) (xy 133.59215 56.224559) (xy 133.592149 56.224556) + (xy 134.13115 56.224556) (xy 134.13115 56.421643) (xy 134.169599 56.614934) (xy 134.169599 56.614936) + (xy 134.245017 56.797013) (xy 134.245018 56.797014) (xy 134.354511 56.960882) (xy 134.493868 57.100239) + (xy 134.657736 57.209732) (xy 134.839815 57.285151) (xy 135.033109 57.3236) (xy 135.03311 57.3236) + (xy 135.23019 57.3236) (xy 135.230191 57.3236) (xy 135.423485 57.285151) (xy 135.605564 57.209732) + (xy 135.769432 57.100239) (xy 135.908789 56.960882) (xy 136.018282 56.797014) (xy 136.093701 56.614935) + (xy 136.13215 56.421641) (xy 136.13215 56.224559) (xy 136.132149 56.224556) (xy 136.67115 56.224556) + (xy 136.67115 56.421643) (xy 136.709599 56.614934) (xy 136.709599 56.614936) (xy 136.785017 56.797013) + (xy 136.785018 56.797014) (xy 136.894511 56.960882) (xy 137.033868 57.100239) (xy 137.197736 57.209732) + (xy 137.379815 57.285151) (xy 137.573109 57.3236) (xy 137.57311 57.3236) (xy 137.77019 57.3236) + (xy 137.770191 57.3236) (xy 137.963485 57.285151) (xy 138.145564 57.209732) (xy 138.309432 57.100239) + (xy 138.448789 56.960882) (xy 138.558282 56.797014) (xy 138.633701 56.614935) (xy 138.67215 56.421641) + (xy 138.67215 56.224559) (xy 138.672149 56.224556) (xy 139.21115 56.224556) (xy 139.21115 56.421643) + (xy 139.249599 56.614934) (xy 139.249599 56.614936) (xy 139.325017 56.797013) (xy 139.325018 56.797014) + (xy 139.434511 56.960882) (xy 139.573868 57.100239) (xy 139.737736 57.209732) (xy 139.919815 57.285151) + (xy 140.113109 57.3236) (xy 140.11311 57.3236) (xy 140.31019 57.3236) (xy 140.310191 57.3236) (xy 140.503485 57.285151) + (xy 140.685564 57.209732) (xy 140.849432 57.100239) (xy 140.988789 56.960882) (xy 141.098282 56.797014) + (xy 141.173701 56.614935) (xy 141.21215 56.421641) (xy 141.21215 56.224559) (xy 141.212149 56.224556) + (xy 141.75115 56.224556) (xy 141.75115 56.421643) (xy 141.789599 56.614934) (xy 141.789599 56.614936) + (xy 141.865017 56.797013) (xy 141.865018 56.797014) (xy 141.974511 56.960882) (xy 142.113868 57.100239) + (xy 142.277736 57.209732) (xy 142.459815 57.285151) (xy 142.653109 57.3236) (xy 142.65311 57.3236) + (xy 142.85019 57.3236) (xy 142.850191 57.3236) (xy 143.043485 57.285151) (xy 143.225564 57.209732) + (xy 143.389432 57.100239) (xy 143.528789 56.960882) (xy 143.638282 56.797014) (xy 143.713701 56.614935) + (xy 143.75215 56.421641) (xy 143.75215 56.224559) (xy 143.752149 56.224556) (xy 144.29115 56.224556) + (xy 144.29115 56.421643) (xy 144.329599 56.614934) (xy 144.329599 56.614936) (xy 144.405017 56.797013) + (xy 144.405018 56.797014) (xy 144.514511 56.960882) (xy 144.653868 57.100239) (xy 144.817736 57.209732) + (xy 144.999815 57.285151) (xy 145.193109 57.3236) (xy 145.19311 57.3236) (xy 145.39019 57.3236) + (xy 145.390191 57.3236) (xy 145.583485 57.285151) (xy 145.765564 57.209732) (xy 145.929432 57.100239) + (xy 146.068789 56.960882) (xy 146.178282 56.797014) (xy 146.253701 56.614935) (xy 146.29215 56.421641) + (xy 146.29215 56.224559) (xy 146.292149 56.224556) (xy 146.83115 56.224556) (xy 146.83115 56.421643) + (xy 146.869599 56.614934) (xy 146.869599 56.614936) (xy 146.945017 56.797013) (xy 146.945018 56.797014) + (xy 147.054511 56.960882) (xy 147.193868 57.100239) (xy 147.357736 57.209732) (xy 147.539815 57.285151) + (xy 147.733109 57.3236) (xy 147.73311 57.3236) (xy 147.93019 57.3236) (xy 147.930191 57.3236) (xy 148.123485 57.285151) + (xy 148.305564 57.209732) (xy 148.469432 57.100239) (xy 148.608789 56.960882) (xy 148.718282 56.797014) + (xy 148.793701 56.614935) (xy 148.83215 56.421641) (xy 148.83215 56.224559) (xy 148.793701 56.031265) + (xy 148.718282 55.849186) (xy 148.608789 55.685318) (xy 148.469432 55.545961) (xy 148.342641 55.461242) + (xy 148.305563 55.436467) (xy 148.123485 55.361049) (xy 147.930193 55.3226) (xy 147.930191 55.3226) + (xy 147.733109 55.3226) (xy 147.733106 55.3226) (xy 147.539815 55.361049) (xy 147.539813 55.361049) + (xy 147.357736 55.436467) (xy 147.193868 55.545961) (xy 147.193864 55.545964) (xy 147.054514 55.685314) + (xy 147.054511 55.685318) (xy 146.945017 55.849186) (xy 146.869599 56.031263) (xy 146.869599 56.031265) + (xy 146.83115 56.224556) (xy 146.292149 56.224556) (xy 146.253701 56.031265) (xy 146.178282 55.849186) + (xy 146.068789 55.685318) (xy 145.929432 55.545961) (xy 145.802641 55.461242) (xy 145.765563 55.436467) + (xy 145.583485 55.361049) (xy 145.390193 55.3226) (xy 145.390191 55.3226) (xy 145.193109 55.3226) + (xy 145.193106 55.3226) (xy 144.999815 55.361049) (xy 144.999813 55.361049) (xy 144.817736 55.436467) + (xy 144.653868 55.545961) (xy 144.653864 55.545964) (xy 144.514514 55.685314) (xy 144.514511 55.685318) + (xy 144.405017 55.849186) (xy 144.329599 56.031263) (xy 144.329599 56.031265) (xy 144.29115 56.224556) + (xy 143.752149 56.224556) (xy 143.713701 56.031265) (xy 143.638282 55.849186) (xy 143.528789 55.685318) + (xy 143.389432 55.545961) (xy 143.262641 55.461242) (xy 143.225563 55.436467) (xy 143.043485 55.361049) + (xy 142.850193 55.3226) (xy 142.850191 55.3226) (xy 142.653109 55.3226) (xy 142.653106 55.3226) + (xy 142.459815 55.361049) (xy 142.459813 55.361049) (xy 142.277736 55.436467) (xy 142.113868 55.545961) + (xy 142.113864 55.545964) (xy 141.974514 55.685314) (xy 141.974511 55.685318) (xy 141.865017 55.849186) + (xy 141.789599 56.031263) (xy 141.789599 56.031265) (xy 141.75115 56.224556) (xy 141.212149 56.224556) + (xy 141.173701 56.031265) (xy 141.098282 55.849186) (xy 140.988789 55.685318) (xy 140.849432 55.545961) + (xy 140.722641 55.461242) (xy 140.685563 55.436467) (xy 140.503485 55.361049) (xy 140.310193 55.3226) + (xy 140.310191 55.3226) (xy 140.113109 55.3226) (xy 140.113106 55.3226) (xy 139.919815 55.361049) + (xy 139.919813 55.361049) (xy 139.737736 55.436467) (xy 139.573868 55.545961) (xy 139.573864 55.545964) + (xy 139.434514 55.685314) (xy 139.434511 55.685318) (xy 139.325017 55.849186) (xy 139.249599 56.031263) + (xy 139.249599 56.031265) (xy 139.21115 56.224556) (xy 138.672149 56.224556) (xy 138.633701 56.031265) + (xy 138.558282 55.849186) (xy 138.448789 55.685318) (xy 138.309432 55.545961) (xy 138.182641 55.461242) + (xy 138.145563 55.436467) (xy 137.963485 55.361049) (xy 137.770193 55.3226) (xy 137.770191 55.3226) + (xy 137.573109 55.3226) (xy 137.573106 55.3226) (xy 137.379815 55.361049) (xy 137.379813 55.361049) + (xy 137.197736 55.436467) (xy 137.033868 55.545961) (xy 137.033864 55.545964) (xy 136.894514 55.685314) + (xy 136.894511 55.685318) (xy 136.785017 55.849186) (xy 136.709599 56.031263) (xy 136.709599 56.031265) + (xy 136.67115 56.224556) (xy 136.132149 56.224556) (xy 136.093701 56.031265) (xy 136.018282 55.849186) + (xy 135.908789 55.685318) (xy 135.769432 55.545961) (xy 135.642641 55.461242) (xy 135.605563 55.436467) + (xy 135.423485 55.361049) (xy 135.230193 55.3226) (xy 135.230191 55.3226) (xy 135.033109 55.3226) + (xy 135.033106 55.3226) (xy 134.839815 55.361049) (xy 134.839813 55.361049) (xy 134.657736 55.436467) + (xy 134.493868 55.545961) (xy 134.493864 55.545964) (xy 134.354514 55.685314) (xy 134.354511 55.685318) + (xy 134.245017 55.849186) (xy 134.169599 56.031263) (xy 134.169599 56.031265) (xy 134.13115 56.224556) + (xy 133.592149 56.224556) (xy 133.553701 56.031265) (xy 133.478282 55.849186) (xy 133.368789 55.685318) + (xy 133.229432 55.545961) (xy 133.102641 55.461242) (xy 133.065563 55.436467) (xy 132.883485 55.361049) + (xy 132.690193 55.3226) (xy 132.690191 55.3226) (xy 132.493109 55.3226) (xy 132.493106 55.3226) + (xy 132.299815 55.361049) (xy 132.299813 55.361049) (xy 132.117736 55.436467) (xy 131.953868 55.545961) + (xy 131.953864 55.545964) (xy 131.814514 55.685314) (xy 131.814511 55.685318) (xy 131.705017 55.849186) + (xy 131.629599 56.031263) (xy 131.629599 56.031265) (xy 131.59115 56.224556) (xy 131.052149 56.224556) + (xy 131.013701 56.031265) (xy 130.938282 55.849186) (xy 130.828789 55.685318) (xy 130.689432 55.545961) + (xy 130.562641 55.461242) (xy 130.525563 55.436467) (xy 130.343485 55.361049) (xy 130.150193 55.3226) + (xy 130.150191 55.3226) (xy 129.953109 55.3226) (xy 129.953106 55.3226) (xy 129.759815 55.361049) + (xy 129.759813 55.361049) (xy 129.577736 55.436467) (xy 129.413868 55.545961) (xy 129.413864 55.545964) + (xy 129.274514 55.685314) (xy 129.274511 55.685318) (xy 129.165017 55.849186) (xy 129.089599 56.031263) + (xy 129.089599 56.031265) (xy 129.05115 56.224556) (xy 128.512149 56.224556) (xy 128.473701 56.031265) + (xy 128.398282 55.849186) (xy 128.288789 55.685318) (xy 128.149432 55.545961) (xy 128.022641 55.461242) + (xy 127.985563 55.436467) (xy 127.803485 55.361049) (xy 127.610193 55.3226) (xy 127.610191 55.3226) + (xy 127.413109 55.3226) (xy 127.413106 55.3226) (xy 127.219815 55.361049) (xy 127.219813 55.361049) + (xy 127.037736 55.436467) (xy 126.873868 55.545961) (xy 126.873864 55.545964) (xy 126.734514 55.685314) + (xy 126.734511 55.685318) (xy 126.625017 55.849186) (xy 126.549599 56.031263) (xy 126.549599 56.031265) + (xy 126.51115 56.224556) (xy 125.972149 56.224556) (xy 125.933701 56.031265) (xy 125.858282 55.849186) + (xy 125.748789 55.685318) (xy 125.609432 55.545961) (xy 125.482641 55.461242) (xy 125.445563 55.436467) + (xy 125.263485 55.361049) (xy 125.070193 55.3226) (xy 125.070191 55.3226) (xy 124.873109 55.3226) + (xy 124.873106 55.3226) (xy 124.679815 55.361049) (xy 124.679813 55.361049) (xy 124.497736 55.436467) + (xy 124.333868 55.545961) (xy 124.333864 55.545964) (xy 124.194514 55.685314) (xy 124.194511 55.685318) + (xy 124.085017 55.849186) (xy 124.009599 56.031263) (xy 124.009599 56.031265) (xy 123.97115 56.224556) + (xy 123.97115 56.421643) (xy 124.009599 56.614934) (xy 124.009599 56.614936) (xy 124.085017 56.797014) + (xy 124.085019 56.797016) (xy 124.144453 56.885966) (xy 124.161062 56.944854) (xy 124.139884 57.002257) + (xy 124.089011 57.03625) (xy 124.087818 57.036578) (xy 124.04991 57.046735) (xy 124.019059 57.055002) + (xy 123.916341 57.114307) (xy 123.91634 57.114308) (xy 123.916337 57.11431) (xy 123.916337 57.114311) + (xy 123.835342 57.195305) (xy 123.780828 57.223081) (xy 123.765341 57.2243) (xy 123.184379 57.2243) + (xy 123.126188 57.205393) (xy 123.090224 57.155893) (xy 123.090224 57.094707) (xy 123.114375 57.055296) + (xy 123.153572 57.016099) (xy 123.208789 56.960882) (xy 123.318282 56.797014) (xy 123.393701 56.614935) + (xy 123.43215 56.421641) (xy 123.43215 56.224559) (xy 123.393701 56.031265) (xy 123.318282 55.849186) + (xy 123.208789 55.685318) (xy 123.069432 55.545961) (xy 122.942641 55.461242) (xy 122.905563 55.436467) + (xy 122.723485 55.361049) (xy 122.530193 55.3226) (xy 122.530191 55.3226) (xy 122.333109 55.3226) + (xy 122.333106 55.3226) (xy 122.139815 55.361049) (xy 122.139813 55.361049) (xy 121.957736 55.436467) + (xy 121.793868 55.545961) (xy 121.793864 55.545964) (xy 121.654514 55.685314) (xy 121.654511 55.685318) + (xy 121.545017 55.849186) (xy 121.469599 56.031263) (xy 121.469599 56.031265) (xy 121.43115 56.224556) + (xy 121.43115 56.421643) (xy 121.469599 56.614934) (xy 121.469599 56.614936) (xy 121.545017 56.797013) + (xy 121.545018 56.797014) (xy 121.654511 56.960882) (xy 121.654514 56.960885) (xy 121.748925 57.055296) + (xy 121.776702 57.109813) (xy 121.767131 57.170245) (xy 121.723866 57.21351) (xy 121.678921 57.2243) + (xy 120.644379 57.2243) (xy 120.586188 57.205393) (xy 120.550224 57.155893) (xy 120.550224 57.094707) + (xy 120.574375 57.055296) (xy 120.613572 57.016099) (xy 120.668789 56.960882) (xy 120.778282 56.797014) + (xy 120.853701 56.614935) (xy 120.89215 56.421641) (xy 120.89215 56.224559) (xy 120.853701 56.031265) + (xy 120.778282 55.849186) (xy 120.668789 55.685318) (xy 120.529432 55.545961) (xy 120.402641 55.461242) + (xy 120.365563 55.436467) (xy 120.183485 55.361049) (xy 119.990193 55.3226) (xy 119.990191 55.3226) + (xy 119.793109 55.3226) (xy 119.793106 55.3226) (xy 119.599815 55.361049) (xy 119.599813 55.361049) + (xy 119.417736 55.436467) (xy 119.253868 55.545961) (xy 119.253864 55.545964) (xy 119.114514 55.685314) + (xy 119.114511 55.685318) (xy 119.005017 55.849186) (xy 118.929599 56.031263) (xy 118.929599 56.031265) + (xy 118.89115 56.224556) (xy 118.89115 56.421643) (xy 118.929599 56.614934) (xy 118.929599 56.614936) + (xy 119.005017 56.797013) (xy 119.005018 56.797014) (xy 119.114511 56.960882) (xy 119.114514 56.960885) + (xy 119.208925 57.055296) (xy 119.236702 57.109813) (xy 119.227131 57.170245) (xy 119.183866 57.21351) + (xy 119.138921 57.2243) (xy 118.648117 57.2243) (xy 118.589926 57.205393) (xy 118.578113 57.195303) + (xy 118.267934 56.885123) (xy 118.240157 56.830607) (xy 118.246473 56.777237) (xy 118.313701 56.614935) + (xy 118.35215 56.421641) (xy 118.35215 56.224559) (xy 118.313701 56.031265) (xy 118.238282 55.849186) + (xy 118.128789 55.685318) (xy 117.989432 55.545961) (xy 117.862641 55.461242) (xy 117.825563 55.436467) + (xy 117.643485 55.361049) (xy 117.450193 55.3226) (xy 117.450191 55.3226) (xy 117.253109 55.3226) + (xy 117.253106 55.3226) (xy 117.059815 55.361049) (xy 117.059813 55.361049) (xy 116.877736 55.436467) + (xy 116.713868 55.545961) (xy 116.713864 55.545964) (xy 116.574514 55.685314) (xy 116.574511 55.685318) + (xy 116.465017 55.849186) (xy 116.389599 56.031263) (xy 116.389599 56.031265) (xy 116.35115 56.224556) + (xy 115.812149 56.224556) (xy 115.773701 56.031265) (xy 115.698282 55.849186) (xy 115.588789 55.685318) + (xy 115.449432 55.545961) (xy 115.322641 55.461242) (xy 115.285563 55.436467) (xy 115.103485 55.361049) + (xy 114.910193 55.3226) (xy 114.910191 55.3226) (xy 114.713109 55.3226) (xy 114.713106 55.3226) + (xy 114.519815 55.361049) (xy 114.519813 55.361049) (xy 114.337736 55.436467) (xy 114.173868 55.545961) + (xy 114.173864 55.545964) (xy 114.034514 55.685314) (xy 114.034511 55.685318) (xy 113.925017 55.849186) + (xy 113.849599 56.031263) (xy 113.849599 56.031265) (xy 113.81115 56.224556) (xy 113.272149 56.224556) + (xy 113.233701 56.031265) (xy 113.158282 55.849186) (xy 113.048789 55.685318) (xy 112.909432 55.545961) + (xy 112.782641 55.461242) (xy 112.745563 55.436467) (xy 112.563485 55.361049) (xy 112.370193 55.3226) + (xy 112.370191 55.3226) (xy 112.173109 55.3226) (xy 112.173106 55.3226) (xy 111.979815 55.361049) + (xy 111.979813 55.361049) (xy 111.797736 55.436467) (xy 111.633868 55.545961) (xy 111.633864 55.545964) + (xy 111.494514 55.685314) (xy 111.494511 55.685318) (xy 111.385017 55.849186) (xy 111.309599 56.031263) + (xy 111.309599 56.031265) (xy 111.27115 56.224556) (xy 110.732149 56.224556) (xy 110.693701 56.031265) + (xy 110.618282 55.849186) (xy 110.508789 55.685318) (xy 110.369432 55.545961) (xy 110.242641 55.461242) + (xy 110.205563 55.436467) (xy 110.023485 55.361049) (xy 109.830193 55.3226) (xy 109.830191 55.3226) + (xy 109.633109 55.3226) (xy 109.633106 55.3226) (xy 109.439815 55.361049) (xy 109.439813 55.361049) + (xy 109.257736 55.436467) (xy 109.093868 55.545961) (xy 109.093864 55.545964) (xy 108.954514 55.685314) + (xy 108.954511 55.685318) (xy 108.845017 55.849186) (xy 108.769599 56.031263) (xy 108.769599 56.031265) + (xy 108.73115 56.224556) (xy 108.19215 56.224556) (xy 108.19215 55.458281) (xy 108.192149 55.458272) + (xy 108.183417 55.414379) (xy 108.183415 55.414375) (xy 108.161911 55.382192) (xy 108.150154 55.364596) + (xy 108.14949 55.364152) (xy 108.100374 55.331334) (xy 108.10037 55.331332) (xy 108.056477 55.3226) + (xy 108.05647 55.3226) (xy 106.32683 55.3226) (xy 106.326822 55.3226) (xy 106.282929 55.331332) + (xy 106.282925 55.331334) (xy 106.233148 55.364594) (xy 106.233144 55.364598) (xy 106.199884 55.414375) + (xy 106.199882 55.414379) (xy 106.19115 55.458272) (xy 98.50465 55.458272) (xy 98.50465 54.783059) + (xy 98.504651 54.78305) (xy 98.504651 54.671873) (xy 98.478715 54.609258) (xy 98.476621 54.604205) + (xy 98.466514 54.579803) (xy 98.396047 54.509336) (xy 98.396045 54.509335) (xy 94.770947 50.884236) + (xy 94.770945 50.884235) (xy 94.770944 50.884234) (xy 94.678879 50.8461) (xy 94.678878 50.8461) + (xy 86.147978 50.8461) (xy 86.048322 50.8461) (xy 86.048321 50.8461) (xy 85.956253 50.884235) (xy 85.576884 51.263604) + (xy 85.522368 51.291381) (xy 85.506881 51.2926) (xy 84.270128 51.2926) (xy 84.270126 51.292601) + (xy 84.17635 51.307452) (xy 84.176345 51.307454) (xy 84.063309 51.365049) (xy 83.973599 51.454759) + (xy 83.916004 51.567795) (xy 83.90115 51.661578) (xy 83.90115 52.424621) (xy 83.901151 52.424623) + (xy 83.916002 52.518399) (xy 83.916004 52.518404) (xy 83.9736 52.631442) (xy 84.063308 52.72115) + (xy 84.176346 52.778746) (xy 84.270131 52.7936) (xy 85.50688 52.793599) (xy 85.565071 52.812506) + (xy 85.576884 52.822595) (xy 86.308254 53.553965) (xy 86.336031 53.608482) (xy 86.33725 53.623969) + (xy 86.33725 55.813052) (xy 86.318343 55.871243) (xy 86.268843 55.907207) (xy 86.207657 55.907207) + (xy 86.193305 55.901261) (xy 86.126957 55.867455) (xy 86.126955 55.867454) (xy 86.033171 55.8526) + (xy 84.270128 55.8526) (xy 84.270126 55.852601) (xy 84.17635 55.867452) (xy 84.176345 55.867454) + (xy 84.063309 55.925049) (xy 83.973599 56.014759) (xy 83.916004 56.127795) (xy 83.90115 56.221578) + (xy 83.90115 56.892645) (xy 83.882243 56.950836) (xy 83.872154 56.962649) (xy 82.75887 58.075934) + (xy 82.705975 58.1551) (xy 82.687684 58.182473) (xy 82.63865 58.300852) (xy 82.638649 58.300855) + (xy 82.638649 58.300856) (xy 82.634324 58.3226) (xy 82.618739 58.40095) (xy 82.61365 58.426531) + (xy 80.779716 58.426531) (xy 80.766348 45.20181) (xy 83.34115 45.20181) (xy 83.34115 45.444389) + (xy 83.344041 45.46635) (xy 83.372395 45.681725) (xy 83.372811 45.684881) (xy 83.372811 45.684886) + (xy 83.39399 45.763926) (xy 83.435364 45.918336) (xy 83.435594 45.919192) (xy 83.435598 45.919205) + (xy 83.528422 46.143304) (xy 83.528424 46.143308) (xy 83.528426 46.143312) (xy 83.649714 46.353389) + (xy 83.649716 46.353392) (xy 83.797379 46.545831) (xy 83.797381 46.545833) (xy 83.797385 46.545838) + (xy 83.968912 46.717365) (xy 83.968916 46.717368) (xy 83.968918 46.71737) (xy 84.071746 46.796272) + (xy 84.161361 46.865036) (xy 84.371438 46.986324) (xy 84.59555 47.079154) (xy 84.829861 47.141938) + (xy 85.070362 47.1736) (xy 85.070363 47.1736) (xy 85.312937 47.1736) (xy 85.312938 47.1736) (xy 85.553439 47.141938) + (xy 85.78775 47.079154) (xy 86.011862 46.986324) (xy 86.221939 46.865036) (xy 86.414388 46.717365) + (xy 86.585915 46.545838) (xy 86.733586 46.353389) (xy 86.785315 46.263791) (xy 94.13385 46.263791) + (xy 94.13385 46.382409) (xy 94.148395 46.436692) (xy 94.164552 46.49699) (xy 94.223857 46.599708) + (xy 94.223859 46.59971) (xy 94.223861 46.599713) (xy 94.307737 46.683589) (xy 94.307739 46.68359) + (xy 94.307741 46.683592) (xy 94.41046 46.742897) (xy 94.410461 46.742897) (xy 94.410464 46.742899) + (xy 94.525041 46.7736) (xy 94.525043 46.7736) (xy 94.643657 46.7736) (xy 94.643659 46.7736) (xy 94.758236 46.742899) + (xy 94.758238 46.742897) (xy 94.75824 46.742897) (xy 94.860958 46.683592) (xy 94.860958 46.683591) + (xy 94.860963 46.683589) (xy 94.941957 46.602594) (xy 94.996472 46.574819) (xy 95.011959 46.5736) + (xy 97.092151 46.5736) (xy 97.150342 46.592507) (xy 97.186306 46.642007) (xy 97.191151 46.6726) + (xy 97.191151 47.079623) (xy 97.206002 47.173399) (xy 97.206004 47.173404) (xy 97.2636 47.286442) + (xy 97.353308 47.37615) (xy 97.466346 47.433746) (xy 97.560131 47.4486) (xy 98.823168 47.448599) + (xy 98.823171 47.448599) (xy 98.823172 47.448598) (xy 98.870061 47.441172) (xy 98.916949 47.433747) + (xy 98.916949 47.433746) (xy 98.916954 47.433746) (xy 99.029992 47.37615) (xy 99.1197 47.286442) + (xy 99.177296 47.173404) (xy 99.19215 47.079619) (xy 99.192149 46.826862) (xy 99.211056 46.768675) + (xy 99.260556 46.732711) (xy 99.321741 46.73271) (xy 99.371241 46.768674) (xy 99.385304 46.796272) + (xy 99.440554 46.966315) (xy 99.537025 47.155652) (xy 99.661927 47.327564) (xy 99.812185 47.477822) (xy 99.984097 47.602724) (xy 100.173434 47.699195) (xy 100.375527 47.764858) (xy 100.441649 47.775331) (xy 100.44165 47.77533) (xy 100.44165 46.727245) (xy 100.508307 46.76573) (xy 100.629115 46.7981) (xy 100.754185 46.7981) (xy 100.874993 46.76573) (xy 100.94165 46.727245) (xy 100.94165 47.775331) (xy 101.007772 47.764858) (xy 101.209865 47.699195) (xy 101.399202 47.602724) (xy 101.571114 47.477822) - (xy 101.721372 47.327564) (xy 101.846274 47.155652) (xy 101.942747 46.966312) (xy 101.955218 46.927928) - (xy 101.991181 46.878427) (xy 102.049371 46.859519) (xy 102.107562 46.878425) (xy 102.137582 46.913573) - (xy 102.20765 47.051088) (xy 102.207651 47.05109) (xy 102.207652 47.051091) (xy 102.207654 47.051094) - (xy 102.314097 47.197601) (xy 102.442149 47.325653) (xy 102.588656 47.432096) (xy 102.750011 47.514311) - (xy 102.922241 47.570271) (xy 102.993786 47.581602) (xy 103.101101 47.5986) (xy 103.101104 47.5986) - (xy 103.282199 47.5986) (xy 103.371627 47.584435) (xy 103.461059 47.570271) (xy 103.633289 47.514311) - (xy 103.794644 47.432096) (xy 103.941151 47.325653) (xy 104.069203 47.197601) (xy 104.175646 47.051094) - (xy 104.257861 46.889739) (xy 104.313821 46.717509) (xy 104.330095 46.614757) (xy 104.34215 46.538649) - (xy 104.34215 46.10755) (xy 104.54115 46.10755) (xy 104.54115 46.538649) (xy 104.569478 46.717506) - (xy 104.625438 46.889737) (xy 104.707651 47.05109) (xy 104.707654 47.051094) (xy 104.814097 47.197601) - (xy 104.942149 47.325653) (xy 105.088656 47.432096) (xy 105.250011 47.514311) (xy 105.422241 47.570271) - (xy 105.493786 47.581602) (xy 105.601101 47.5986) (xy 105.601104 47.5986) (xy 105.782199 47.5986) - (xy 105.871627 47.584435) (xy 105.961059 47.570271) (xy 106.133289 47.514311) (xy 106.294644 47.432096) - (xy 106.441151 47.325653) (xy 106.569203 47.197601) (xy 106.675646 47.051094) (xy 106.724938 46.954352) - (xy 106.768203 46.911088) (xy 106.828635 46.901517) (xy 106.883152 46.929294) (xy 107.674568 47.72071) - (xy 107.67457 47.720713) (xy 107.749137 47.79528) (xy 107.7673 47.805766) (xy 107.767304 47.80577) - (xy 107.767305 47.805769) (xy 107.840458 47.848005) (xy 107.840459 47.848005) (xy 107.840462 47.848007) - (xy 107.942323 47.875301) (xy 107.942325 47.875301) (xy 108.05384 47.875301) (xy 108.053856 47.8753) - (xy 110.313389 47.8753) (xy 110.37158 47.894207) (xy 110.407544 47.943707) (xy 110.407544 48.004893) - (xy 110.383394 48.044301) (xy 110.314097 48.113599) (xy 110.263348 48.18345) (xy 110.207652 48.260108) - (xy 110.125438 48.421462) (xy 110.069478 48.593693) (xy 110.04115 48.77255) (xy 110.04115 48.953649) - (xy 110.069478 49.132506) (xy 110.125438 49.304737) (xy 110.202523 49.456025) (xy 110.207654 49.466094) - (xy 110.314097 49.612601) (xy 110.442149 49.740653) (xy 110.588656 49.847096) (xy 110.750011 49.929311) - (xy 110.761133 49.932924) (xy 110.764633 49.934062) (xy 110.814133 49.970026) (xy 110.833041 50.028216) - (xy 110.814134 50.086407) (xy 110.764635 50.122371) (xy 110.764634 50.122372) (xy 110.673434 50.152004) - (xy 110.484096 50.248476) (xy 110.484092 50.248478) (xy 110.429932 50.287828) (xy 111.062241 50.920137) - (xy 110.998657 50.937175) (xy 110.884643 51.003001) (xy 110.791551 51.096093) (xy 110.725725 51.210107) - (xy 110.708687 51.273691) (xy 110.076378 50.641382) (xy 110.037028 50.695542) (xy 110.037026 50.695546) - (xy 109.940554 50.884884) (xy 109.87489 51.086978) (xy 109.84165 51.296849) (xy 109.84165 51.50935) - (xy 109.87489 51.719221) (xy 109.940554 51.921315) (xy 110.037026 52.110653) (xy 110.03703 52.110659) - (xy 110.076378 52.164816) (xy 110.076379 52.164816) (xy 110.708687 51.532507) (xy 110.725725 51.596093) - (xy 110.791551 51.710107) (xy 110.884643 51.803199) (xy 110.998657 51.869025) (xy 111.062239 51.886062) - (xy 110.429932 52.518369) (xy 110.429932 52.51837) (xy 110.48409 52.557719) (xy 110.484096 52.557723) - (xy 110.673434 52.654195) (xy 110.875528 52.719859) (xy 111.0854 52.7531) (xy 111.2979 52.7531) - (xy 111.507771 52.719859) (xy 111.709865 52.654195) (xy 111.899206 52.55772) (xy 111.953366 52.51837) - (xy 111.321058 51.886062) (xy 111.384643 51.869025) (xy 111.498657 51.803199) (xy 111.591749 51.710107) - (xy 111.657575 51.596093) (xy 111.674612 51.532508) (xy 112.30692 52.164816) (xy 112.34627 52.110656) - (xy 112.442745 51.921315) (xy 112.508409 51.719221) (xy 112.54165 51.50935) (xy 112.54165 51.296849) - (xy 112.508409 51.086978) (xy 112.442745 50.884884) (xy 112.346273 50.695546) (xy 112.346269 50.69554) - (xy 112.30692 50.641382) (xy 112.306919 50.641382) (xy 111.674612 51.273689) (xy 111.657575 51.210107) - (xy 111.591749 51.096093) (xy 111.498657 51.003001) (xy 111.384643 50.937175) (xy 111.321057 50.920137) - (xy 111.953366 50.287829) (xy 111.953366 50.287828) (xy 111.899209 50.24848) (xy 111.899203 50.248476) - (xy 111.709865 50.152004) (xy 111.618665 50.122372) (xy 111.569165 50.086408) (xy 111.550258 50.028217) - (xy 111.569165 49.970026) (xy 111.618663 49.934062) (xy 111.618667 49.934062) (xy 111.618668 49.934062) - (xy 111.633283 49.929313) (xy 111.633283 49.929312) (xy 111.633289 49.929311) (xy 111.794644 49.847096) - (xy 111.941151 49.740653) (xy 112.069203 49.612601) (xy 112.175646 49.466094) (xy 112.257861 49.304739) - (xy 112.313821 49.132509) (xy 112.331632 49.020052) (xy 112.34215 48.953649) (xy 112.34215 48.77255) - (xy 112.322101 48.64597) (xy 112.313821 48.593691) (xy 112.257861 48.421461) (xy 112.175646 48.260106) - (xy 112.069203 48.113599) (xy 111.999905 48.044301) (xy 111.97213 47.989787) (xy 111.981701 47.929355) - (xy 112.024966 47.88609) (xy 112.069911 47.8753) (xy 113.646249 47.8753) (xy 113.70444 47.894207) - (xy 113.716253 47.904296) (xy 114.128654 48.316697) (xy 114.156431 48.371214) (xy 114.15765 48.386701) - (xy 114.15765 48.458857) (xy 114.198573 48.611584) (xy 114.27763 48.748516) (xy 114.389434 48.86032) - (xy 114.526366 48.939377) (xy 114.679093 48.9803) (xy 114.679095 48.9803) (xy 114.837205 48.9803) - (xy 114.837207 48.9803) (xy 114.989934 48.939377) (xy 115.126866 48.86032) (xy 115.23867 48.748516) - (xy 115.317727 48.611584) (xy 115.35865 48.458857) (xy 115.35865 48.300743) (xy 115.317727 48.148016) - (xy 115.23867 48.011084) (xy 115.126866 47.89928) (xy 114.989934 47.820223) (xy 114.837207 47.7793) - (xy 114.837205 47.7793) (xy 114.765051 47.7793) (xy 114.70686 47.760393) (xy 114.695047 47.750304) - (xy 114.401839 47.457096) (xy 114.099063 47.15432) (xy 114.09906 47.154318) (xy 114.099059 47.154317) - (xy 114.099058 47.154316) (xy 114.007741 47.101594) (xy 114.007743 47.101594) (xy 113.96822 47.091004) - (xy 113.905877 47.0743) (xy 113.905875 47.0743) (xy 112.44115 47.0743) (xy 112.382959 47.055393) - (xy 112.346995 47.005893) (xy 112.34215 46.9753) (xy 112.34215 46.291689) (xy 112.342149 45.554993) - (xy 115.04115 45.554993) (xy 115.04115 47.091206) (xy 115.051773 47.179665) (xy 115.107287 47.320439) - (xy 115.107288 47.320441) (xy 115.107289 47.320442) (xy 115.198728 47.441022) (xy 115.319308 47.532461) - (xy 115.319309 47.532461) (xy 115.31931 47.532462) (xy 115.3577 47.547601) (xy 115.460086 47.587977) - (xy 115.548548 47.5986) (xy 115.54855 47.5986) (xy 116.83475 47.5986) (xy 116.834752 47.5986) (xy 116.923214 47.587977) - (xy 117.063992 47.532461) (xy 117.184572 47.441022) (xy 117.276011 47.320442) (xy 117.331527 47.179664) - (xy 117.34215 47.091202) (xy 117.34215 46.10755) (xy 117.54115 46.10755) (xy 117.54115 46.538649) - (xy 117.569478 46.717506) (xy 117.625438 46.889737) (xy 117.707651 47.05109) (xy 117.707654 47.051094) - (xy 117.814097 47.197601) (xy 117.942149 47.325653) (xy 118.088656 47.432096) (xy 118.250011 47.514311) - (xy 118.422241 47.570271) (xy 118.493786 47.581602) (xy 118.601101 47.5986) (xy 118.601104 47.5986) - (xy 118.782199 47.5986) (xy 118.871627 47.584435) (xy 118.961059 47.570271) (xy 119.133289 47.514311) - (xy 119.294644 47.432096) (xy 119.441151 47.325653) (xy 119.569203 47.197601) (xy 119.675646 47.051094) - (xy 119.745716 46.913573) (xy 119.788981 46.870309) (xy 119.849413 46.860738) (xy 119.90393 46.888515) - (xy 119.92808 46.927926) (xy 119.940551 46.966309) (xy 120.037025 47.155652) (xy 120.161927 47.327564) - (xy 120.312185 47.477822) (xy 120.484097 47.602724) (xy 120.673434 47.699195) (xy 120.875527 47.764858) - (xy 120.941649 47.775331) (xy 120.94165 47.77533) (xy 120.94165 46.727245) (xy 121.008307 46.76573) - (xy 121.129115 46.7981) (xy 121.254185 46.7981) (xy 121.374993 46.76573) (xy 121.44165 46.727245) - (xy 121.44165 47.775331) (xy 121.507772 47.764858) (xy 121.709865 47.699195) (xy 121.899202 47.602724) - (xy 122.071114 47.477822) (xy 122.221372 47.327564) (xy 122.346274 47.155652) (xy 122.442745 46.966315) - (xy 122.508409 46.764221) (xy 122.53868 46.5731) (xy 121.595796 46.5731) (xy 121.63428 46.506443) - (xy 121.66665 46.385635) (xy 121.66665 46.260565) (xy 121.63428 46.139757) (xy 121.595796 46.0731) - (xy 122.53868 46.0731) (xy 122.53868 46.073099) (xy 122.508409 45.881978) (xy 122.442745 45.679884) - (xy 122.387768 45.571984) (xy 122.366372 45.529993) (xy 126.04115 45.529993) (xy 126.04115 47.116206) - (xy 126.051773 47.204665) (xy 126.107287 47.345439) (xy 126.107288 47.345441) (xy 126.107289 47.345442) - (xy 126.198728 47.466022) (xy 126.319308 47.557461) (xy 126.319309 47.557461) (xy 126.31931 47.557462) - (xy 126.380581 47.581624) (xy 126.460086 47.612977) (xy 126.548548 47.6236) (xy 126.54855 47.6236) - (xy 127.83475 47.6236) (xy 127.834752 47.6236) (xy 127.923214 47.612977) (xy 128.063992 47.557461) - (xy 128.184572 47.466022) (xy 128.276011 47.345442) (xy 128.331527 47.204664) (xy 128.334262 47.181882) - (xy 128.359971 47.126362) (xy 128.413406 47.096556) (xy 128.474155 47.10385) (xy 128.519014 47.145458) - (xy 128.520765 47.14874) (xy 128.537023 47.180648) (xy 128.537024 47.18065) (xy 128.661927 47.352564) - (xy 128.812185 47.502822) (xy 128.984097 47.627724) (xy 129.173434 47.724195) (xy 129.375527 47.789858) - (xy 129.441649 47.800331) (xy 129.44165 47.80033) (xy 129.44165 46.756112) (xy 129.498657 46.789025) - (xy 129.625824 46.8231) (xy 129.757476 46.8231) (xy 129.884643 46.789025) (xy 129.94165 46.756112) - (xy 129.94165 47.800331) (xy 130.007772 47.789858) (xy 130.209865 47.724195) (xy 130.399202 47.627724) - (xy 130.571114 47.502822) (xy 130.721372 47.352564) (xy 130.846274 47.180652) (xy 130.942745 46.991315) - (xy 131.008409 46.789221) (xy 131.04165 46.57935) (xy 131.04165 46.573101) (xy 131.041649 46.5731) - (xy 130.124662 46.5731) (xy 130.157575 46.516093) (xy 130.19165 46.388926) (xy 130.19165 46.257274) - (xy 130.157575 46.130107) (xy 130.124662 46.0731) (xy 131.041649 46.0731) (xy 131.04165 46.073099) - (xy 131.04165 46.066849) (xy 131.008409 45.856978) (xy 130.942745 45.654884) (xy 130.900506 45.571984) - (xy 130.87911 45.529993) (xy 134.64115 45.529993) (xy 134.64115 47.116206) (xy 134.651773 47.204665) - (xy 134.707287 47.345439) (xy 134.707288 47.345441) (xy 134.707289 47.345442) (xy 134.798728 47.466022) - (xy 134.919308 47.557461) (xy 134.919309 47.557461) (xy 134.91931 47.557462) (xy 134.980581 47.581624) - (xy 135.060086 47.612977) (xy 135.148548 47.6236) (xy 135.14855 47.6236) (xy 136.43475 47.6236) - (xy 136.434752 47.6236) (xy 136.523214 47.612977) (xy 136.663992 47.557461) (xy 136.784572 47.466022) - (xy 136.876011 47.345442) (xy 136.931527 47.204664) (xy 136.94215 47.116202) (xy 136.94215 45.529998) - (xy 136.931527 45.441536) (xy 136.876011 45.300758) (xy 136.784572 45.180178) (xy 136.663992 45.088739) - (xy 136.663991 45.088738) (xy 136.663989 45.088737) (xy 136.523215 45.033223) (xy 136.434756 45.0226) - (xy 136.434752 45.0226) (xy 135.148548 45.0226) (xy 135.148543 45.0226) (xy 135.060084 45.033223) - (xy 134.91931 45.088737) (xy 134.919306 45.08874) (xy 134.798731 45.180175) (xy 134.798725 45.180181) - (xy 134.70729 45.300756) (xy 134.707287 45.30076) (xy 134.651773 45.441534) (xy 134.64115 45.529993) - (xy 130.87911 45.529993) (xy 130.846274 45.465548) (xy 130.721372 45.293635) (xy 130.571114 45.143377) - (xy 130.399202 45.018475) (xy 130.209865 44.922004) (xy 130.00777 44.85634) (xy 129.94165 44.845867) - (xy 129.94165 45.890088) (xy 129.884643 45.857175) (xy 129.757476 45.8231) (xy 129.625824 45.8231) - (xy 129.498657 45.857175) (xy 129.44165 45.890088) (xy 129.44165 44.845868) (xy 129.441649 44.845867) - (xy 129.37553 44.85634) (xy 129.375528 44.85634) (xy 129.173434 44.922004) (xy 128.984097 45.018475) - (xy 128.812185 45.143377) (xy 128.661927 45.293635) (xy 128.537025 45.465548) (xy 128.520765 45.49746) - (xy 128.477499 45.540724) (xy 128.417067 45.550294) (xy 128.362551 45.522515) (xy 128.334775 45.467998) - (xy 128.334262 45.464315) (xy 128.331527 45.441536) (xy 128.276011 45.300758) (xy 128.184572 45.180178) - (xy 128.063992 45.088739) (xy 128.063991 45.088738) (xy 128.063989 45.088737) (xy 127.923215 45.033223) - (xy 127.834756 45.0226) (xy 127.834752 45.0226) (xy 126.548548 45.0226) (xy 126.548543 45.0226) - (xy 126.460084 45.033223) (xy 126.31931 45.088737) (xy 126.319306 45.08874) (xy 126.198731 45.180175) - (xy 126.198725 45.180181) (xy 126.10729 45.300756) (xy 126.107287 45.30076) (xy 126.051773 45.441534) - (xy 126.04115 45.529993) (xy 122.366372 45.529993) (xy 122.346274 45.490548) (xy 122.221372 45.318635) - (xy 122.071114 45.168377) (xy 121.899202 45.043475) (xy 121.709865 44.947004) (xy 121.50777 44.88134) - (xy 121.44165 44.870867) (xy 121.44165 45.918954) (xy 121.374993 45.88047) (xy 121.254185 45.8481) - (xy 121.129115 45.8481) (xy 121.008307 45.88047) (xy 120.94165 45.918954) (xy 120.94165 44.870868) - (xy 120.941649 44.870867) (xy 120.87553 44.88134) (xy 120.875528 44.88134) (xy 120.673434 44.947004) - (xy 120.484097 45.043475) (xy 120.312185 45.168377) (xy 120.161927 45.318635) (xy 120.037025 45.490547) - (xy 119.940552 45.679888) (xy 119.92808 45.718274) (xy 119.892116 45.767773) (xy 119.833925 45.78668) - (xy 119.775734 45.767772) (xy 119.745716 45.732625) (xy 119.675647 45.595108) (xy 119.675646 45.595106) - (xy 119.569203 45.448599) (xy 119.441151 45.320547) (xy 119.294644 45.214104) (xy 119.294643 45.214103) - (xy 119.294641 45.214102) (xy 119.133287 45.131888) (xy 118.961056 45.075928) (xy 118.782199 45.0476) - (xy 118.782196 45.0476) (xy 118.601104 45.0476) (xy 118.601101 45.0476) (xy 118.422243 45.075928) - (xy 118.250012 45.131888) (xy 118.088658 45.214102) (xy 118.027946 45.258212) (xy 117.942149 45.320547) - (xy 117.814097 45.448599) (xy 117.778598 45.49746) (xy 117.707652 45.595108) (xy 117.625438 45.756462) - (xy 117.569478 45.928693) (xy 117.54115 46.10755) (xy 117.34215 46.10755) (xy 117.34215 45.554998) - (xy 117.331527 45.466536) (xy 117.276011 45.325758) (xy 117.184572 45.205178) (xy 117.063992 45.113739) - (xy 117.063991 45.113738) (xy 117.063989 45.113737) (xy 116.923215 45.058223) (xy 116.834756 45.0476) - (xy 116.834752 45.0476) (xy 115.548548 45.0476) (xy 115.548543 45.0476) (xy 115.460084 45.058223) - (xy 115.31931 45.113737) (xy 115.319306 45.11374) (xy 115.198731 45.205175) (xy 115.198725 45.205181) - (xy 115.10729 45.325756) (xy 115.107287 45.32576) (xy 115.051773 45.466534) (xy 115.04115 45.554993) - (xy 112.342149 45.554993) (xy 112.342149 45.428236) (xy 112.339235 45.403109) (xy 112.293856 45.300335) - (xy 112.214415 45.220894) (xy 112.111641 45.175515) (xy 112.11164 45.175514) (xy 112.111638 45.175514) - (xy 112.086518 45.1726) (xy 110.296789 45.1726) (xy 110.296786 45.172601) (xy 110.271659 45.175514) - (xy 110.168885 45.220894) (xy 110.089444 45.300335) (xy 110.044064 45.403111) (xy 110.04115 45.42823) - (xy 110.04115 45.428232) (xy 110.04115 45.428235) (xy 110.04115 46.244044) (xy 110.041151 46.9753) - (xy 110.022244 47.033491) (xy 109.972744 47.069455) (xy 109.942151 47.0743) (xy 108.20195 47.0743) - (xy 108.143759 47.055393) (xy 108.131946 47.045304) (xy 107.625288 46.538646) (xy 107.089263 46.00262) - (xy 107.08926 46.002618) (xy 107.089258 46.002616) (xy 106.997941 45.949894) (xy 106.997943 45.949894) - (xy 106.936324 45.933384) (xy 106.896077 45.9226) (xy 106.896075 45.9226) (xy 106.88377 45.9226) - (xy 106.825579 45.903693) (xy 106.789616 45.854194) (xy 106.757861 45.756461) (xy 106.675646 45.595106) - (xy 106.569203 45.448599) (xy 106.441151 45.320547) (xy 106.294644 45.214104) (xy 106.294643 45.214103) - (xy 106.294641 45.214102) (xy 106.133287 45.131888) (xy 105.961056 45.075928) (xy 105.782199 45.0476) - (xy 105.782196 45.0476) (xy 105.601104 45.0476) (xy 105.601101 45.0476) (xy 105.422243 45.075928) - (xy 105.250012 45.131888) (xy 105.088658 45.214102) (xy 105.027946 45.258212) (xy 104.942149 45.320547) - (xy 104.814097 45.448599) (xy 104.778598 45.49746) (xy 104.707652 45.595108) (xy 104.625438 45.756462) - (xy 104.569478 45.928693) (xy 104.54115 46.10755) (xy 104.34215 46.10755) (xy 104.313821 45.928693) - (xy 104.313821 45.928691) (xy 104.257861 45.756461) (xy 104.175646 45.595106) (xy 104.069203 45.448599) - (xy 103.941151 45.320547) (xy 103.794644 45.214104) (xy 103.794643 45.214103) (xy 103.794641 45.214102) - (xy 103.633287 45.131888) (xy 103.461056 45.075928) (xy 103.282199 45.0476) (xy 103.282196 45.0476) - (xy 103.101104 45.0476) (xy 103.101101 45.0476) (xy 102.922243 45.075928) (xy 102.750012 45.131888) - (xy 102.588658 45.214102) (xy 102.527946 45.258212) (xy 102.442149 45.320547) (xy 102.314097 45.448599) - (xy 102.278598 45.49746) (xy 102.207651 45.595109) (xy 102.20765 45.595111) (xy 102.137582 45.732626) - (xy 102.094317 45.77589) (xy 102.033885 45.785461) (xy 101.979369 45.757683) (xy 101.955218 45.718272) - (xy 101.942746 45.679886) (xy 101.846274 45.490547) (xy 101.721372 45.318635) (xy 101.571114 45.168377) + (xy 101.721372 47.327564) (xy 101.846274 47.155652) (xy 101.942745 46.966315) (xy 102.008409 46.764221) + (xy 102.021876 46.679193) (xy 102.049653 46.624677) (xy 102.10417 46.596899) (xy 102.164602 46.60647) + (xy 102.207866 46.649735) (xy 102.216755 46.675365) (xy 102.229599 46.739936) (xy 102.305017 46.922013) + (xy 102.321722 46.947013) (xy 102.414511 47.085882) (xy 102.553868 47.225239) (xy 102.717736 47.334732) + (xy 102.899815 47.410151) (xy 103.093109 47.4486) (xy 103.09311 47.4486) (xy 103.29019 47.4486) + (xy 103.290191 47.4486) (xy 103.483485 47.410151) (xy 103.665564 47.334732) (xy 103.829432 47.225239) + (xy 103.968789 47.085882) (xy 104.078282 46.922014) (xy 104.153701 46.739935) (xy 104.19215 46.546641) + (xy 104.19215 46.099559) (xy 104.192149 46.099556) (xy 104.69115 46.099556) (xy 104.69115 46.546643) + (xy 104.712966 46.656317) (xy 104.726011 46.721899) (xy 104.729599 46.739934) (xy 104.729599 46.739936) + (xy 104.805017 46.922013) (xy 104.821722 46.947013) (xy 104.914511 47.085882) (xy 105.053868 47.225239) + (xy 105.217736 47.334732) (xy 105.399815 47.410151) (xy 105.593109 47.4486) (xy 105.59311 47.4486) + (xy 105.79019 47.4486) (xy 105.790191 47.4486) (xy 105.983485 47.410151) (xy 106.165564 47.334732) + (xy 106.329432 47.225239) (xy 106.468789 47.085882) (xy 106.578282 46.922014) (xy 106.653701 46.739935) + (xy 106.659413 46.711216) (xy 106.689309 46.657833) (xy 106.744874 46.632216) (xy 106.804884 46.644152) + (xy 106.826515 46.660526) (xy 107.307928 47.141938) (xy 107.782685 47.616695) (xy 107.782686 47.616697) + (xy 107.853153 47.687164) (xy 107.878348 47.6976) (xy 107.891362 47.702991) (xy 107.891364 47.702992) + (xy 107.902313 47.707527) (xy 107.945222 47.725301) (xy 107.945223 47.725301) (xy 108.056401 47.725301) + (xy 108.056409 47.7253) (xy 110.826404 47.7253) (xy 110.884595 47.744207) (xy 110.920559 47.793707) + (xy 110.920559 47.854893) (xy 110.884595 47.904393) (xy 110.864289 47.915764) (xy 110.717736 47.976467) + (xy 110.553868 48.085961) (xy 110.553864 48.085964) (xy 110.414514 48.225314) (xy 110.414511 48.225318) + (xy 110.305017 48.389186) (xy 110.229599 48.571263) (xy 110.229599 48.571265) (xy 110.19115 48.764556) + (xy 110.19115 48.961643) (xy 110.212506 49.069003) (xy 110.227962 49.146707) (xy 110.229599 49.154934) + (xy 110.229599 49.154936) (xy 110.305017 49.337013) (xy 110.341349 49.391388) (xy 110.414511 49.500882) + (xy 110.553868 49.640239) (xy 110.717736 49.749732) (xy 110.899815 49.825151) (xy 111.076333 49.860263) + (xy 111.129717 49.89016) (xy 111.155333 49.945725) (xy 111.143396 50.005735) (xy 111.098466 50.047267) + (xy 111.072506 50.055142) (xy 110.875528 50.08634) (xy 110.673434 50.152004) (xy 110.484096 50.248476) + (xy 110.484092 50.248478) (xy 110.429932 50.287828) (xy 111.062241 50.920137) (xy 110.998657 50.937175) + (xy 110.884643 51.003001) (xy 110.791551 51.096093) (xy 110.725725 51.210107) (xy 110.708687 51.273691) + (xy 110.076378 50.641382) (xy 110.037028 50.695542) (xy 110.037026 50.695546) (xy 109.940554 50.884884) + (xy 109.87489 51.086978) (xy 109.84165 51.296849) (xy 109.84165 51.50935) (xy 109.87489 51.719221) + (xy 109.940554 51.921315) (xy 110.037026 52.110653) (xy 110.03703 52.110659) (xy 110.076378 52.164816) + (xy 110.076379 52.164816) (xy 110.708687 51.532507) (xy 110.725725 51.596093) (xy 110.791551 51.710107) + (xy 110.884643 51.803199) (xy 110.998657 51.869025) (xy 111.062239 51.886062) (xy 110.429932 52.518369) + (xy 110.429932 52.51837) (xy 110.48409 52.557719) (xy 110.484096 52.557723) (xy 110.673434 52.654195) + (xy 110.875528 52.719859) (xy 111.0854 52.7531) (xy 111.2979 52.7531) (xy 111.507771 52.719859) + (xy 111.709865 52.654195) (xy 111.899206 52.55772) (xy 111.953366 52.51837) (xy 111.321058 51.886062) + (xy 111.384643 51.869025) (xy 111.498657 51.803199) (xy 111.591749 51.710107) (xy 111.657575 51.596093) + (xy 111.674612 51.532508) (xy 112.30692 52.164816) (xy 112.34627 52.110656) (xy 112.442745 51.921315) + (xy 112.508409 51.719221) (xy 112.54165 51.50935) (xy 112.54165 51.296849) (xy 112.508409 51.086978) + (xy 112.442745 50.884884) (xy 112.346273 50.695546) (xy 112.346269 50.69554) (xy 112.30692 50.641382) + (xy 112.306919 50.641382) (xy 111.674612 51.273689) (xy 111.657575 51.210107) (xy 111.591749 51.096093) + (xy 111.498657 51.003001) (xy 111.384643 50.937175) (xy 111.321057 50.920137) (xy 111.953366 50.287829) + (xy 111.953366 50.287828) (xy 111.899209 50.24848) (xy 111.899203 50.248476) (xy 111.709865 50.152004) + (xy 111.507771 50.08634) (xy 111.310793 50.055142) (xy 111.256276 50.027364) (xy 111.228499 49.972848) + (xy 111.23807 49.912416) (xy 111.281335 49.869151) (xy 111.306964 49.860263) (xy 111.483485 49.825151) + (xy 111.665564 49.749732) (xy 111.829432 49.640239) (xy 111.968789 49.500882) (xy 112.078282 49.337014) + (xy 112.153701 49.154935) (xy 112.19215 48.961641) (xy 112.19215 48.764559) (xy 112.153701 48.571265) + (xy 112.078282 48.389186) (xy 111.968789 48.225318) (xy 111.829432 48.085961) (xy 111.665564 47.976468) + (xy 111.665565 47.976468) (xy 111.665563 47.976467) (xy 111.519011 47.915764) (xy 111.472485 47.876028) + (xy 111.458201 47.816533) (xy 111.481616 47.760005) (xy 111.533785 47.728035) (xy 111.556896 47.7253) + (xy 113.708381 47.7253) (xy 113.766572 47.744207) (xy 113.778385 47.754296) (xy 114.278654 48.254565) + (xy 114.306431 48.309082) (xy 114.30765 48.324569) (xy 114.30765 48.439109) (xy 114.31816 48.478331) + (xy 114.338352 48.55369) (xy 114.397657 48.656408) (xy 114.397659 48.65641) (xy 114.397661 48.656413) + (xy 114.481537 48.740289) (xy 114.481539 48.74029) (xy 114.481541 48.740292) (xy 114.58426 48.799597) + (xy 114.584261 48.799597) (xy 114.584264 48.799599) (xy 114.698841 48.8303) (xy 114.698843 48.8303) + (xy 114.817457 48.8303) (xy 114.817459 48.8303) (xy 114.932036 48.799599) (xy 114.932038 48.799597) + (xy 114.93204 48.799597) (xy 115.034758 48.740292) (xy 115.034758 48.740291) (xy 115.034763 48.740289) + (xy 115.118639 48.656413) (xy 115.125698 48.644186) (xy 115.177947 48.55369) (xy 115.177947 48.553688) + (xy 115.177949 48.553686) (xy 115.20865 48.439109) (xy 115.20865 48.320491) (xy 115.177949 48.205914) + (xy 115.177947 48.205911) (xy 115.177947 48.205909) (xy 115.118642 48.103191) (xy 115.11864 48.103189) + (xy 115.118639 48.103187) (xy 115.034763 48.019311) (xy 115.03476 48.019309) (xy 115.034758 48.019307) + (xy 114.932039 47.960002) (xy 114.93204 47.960002) (xy 114.882411 47.946704) (xy 114.817459 47.9293) + (xy 114.702919 47.9293) (xy 114.644728 47.910393) (xy 114.632915 47.900304) (xy 114.33021 47.597599) + (xy 113.995047 47.262436) (xy 113.995045 47.262435) (xy 113.995044 47.262434) (xy 113.902979 47.2243) + (xy 113.902978 47.2243) (xy 112.29115 47.2243) (xy 112.232959 47.205393) (xy 112.196995 47.155893) + (xy 112.19215 47.1253) (xy 112.19215 45.566578) (xy 115.19115 45.566578) (xy 115.19115 47.079621) + (xy 115.191151 47.079623) (xy 115.206002 47.173399) (xy 115.206004 47.173404) (xy 115.2636 47.286442) + (xy 115.353308 47.37615) (xy 115.466346 47.433746) (xy 115.560131 47.4486) (xy 116.823168 47.448599) + (xy 116.823171 47.448599) (xy 116.823172 47.448598) (xy 116.870061 47.441172) (xy 116.916949 47.433747) + (xy 116.916949 47.433746) (xy 116.916954 47.433746) (xy 117.029992 47.37615) (xy 117.1197 47.286442) + (xy 117.177296 47.173404) (xy 117.19215 47.079619) (xy 117.192149 46.099556) (xy 117.69115 46.099556) + (xy 117.69115 46.546643) (xy 117.712966 46.656317) (xy 117.726011 46.721899) (xy 117.729599 46.739934) + (xy 117.729599 46.739936) (xy 117.805017 46.922013) (xy 117.821722 46.947013) (xy 117.914511 47.085882) + (xy 118.053868 47.225239) (xy 118.217736 47.334732) (xy 118.399815 47.410151) (xy 118.593109 47.4486) + (xy 118.59311 47.4486) (xy 118.79019 47.4486) (xy 118.790191 47.4486) (xy 118.983485 47.410151) + (xy 119.165564 47.334732) (xy 119.329432 47.225239) (xy 119.468789 47.085882) (xy 119.578282 46.922014) + (xy 119.653701 46.739935) (xy 119.666544 46.675365) (xy 119.69644 46.621982) (xy 119.752005 46.596366) + (xy 119.812015 46.608303) (xy 119.853548 46.653232) (xy 119.861423 46.679192) (xy 119.874891 46.764222) + (xy 119.940554 46.966315) (xy 120.037025 47.155652) (xy 120.161927 47.327564) (xy 120.312185 47.477822) + (xy 120.484097 47.602724) (xy 120.673434 47.699195) (xy 120.875527 47.764858) (xy 120.941649 47.775331) + (xy 120.94165 47.77533) (xy 120.94165 46.727245) (xy 121.008307 46.76573) (xy 121.129115 46.7981) + (xy 121.254185 46.7981) (xy 121.374993 46.76573) (xy 121.44165 46.727245) (xy 121.44165 47.775331) + (xy 121.507772 47.764858) (xy 121.709865 47.699195) (xy 121.899202 47.602724) (xy 122.071114 47.477822) + (xy 122.221372 47.327564) (xy 122.346274 47.155652) (xy 122.442745 46.966315) (xy 122.508409 46.764221) + (xy 122.53868 46.5731) (xy 121.595796 46.5731) (xy 121.63428 46.506443) (xy 121.66665 46.385635) + (xy 121.66665 46.260565) (xy 121.63428 46.139757) (xy 121.595796 46.0731) (xy 122.53868 46.0731) + (xy 122.53868 46.073099) (xy 122.508409 45.881978) (xy 122.442745 45.679884) (xy 122.393195 45.582636) + (xy 122.372275 45.541578) (xy 126.19115 45.541578) (xy 126.19115 47.104621) (xy 126.191151 47.104623) + (xy 126.206002 47.198399) (xy 126.206004 47.198404) (xy 126.2636 47.311442) (xy 126.353308 47.40115) + (xy 126.466346 47.458746) (xy 126.560131 47.4736) (xy 127.823168 47.473599) (xy 127.823171 47.473599) + (xy 127.823172 47.473598) (xy 127.870061 47.466172) (xy 127.916949 47.458747) (xy 127.916949 47.458746) + (xy 127.916954 47.458746) (xy 128.029992 47.40115) (xy 128.1197 47.311442) (xy 128.177296 47.198404) + (xy 128.19215 47.104619) (xy 128.192149 46.851863) (xy 128.211056 46.793676) (xy 128.260556 46.757712) + (xy 128.321741 46.757711) (xy 128.371241 46.793675) (xy 128.385304 46.821273) (xy 128.440554 46.991315) + (xy 128.537025 47.180652) (xy 128.661927 47.352564) (xy 128.812185 47.502822) (xy 128.984097 47.627724) + (xy 129.173434 47.724195) (xy 129.375527 47.789858) (xy 129.441649 47.800331) (xy 129.44165 47.80033) + (xy 129.44165 46.756112) (xy 129.498657 46.789025) (xy 129.625824 46.8231) (xy 129.757476 46.8231) + (xy 129.884643 46.789025) (xy 129.94165 46.756112) (xy 129.94165 47.800331) (xy 130.007772 47.789858) + (xy 130.209865 47.724195) (xy 130.399202 47.627724) (xy 130.571114 47.502822) (xy 130.721372 47.352564) + (xy 130.846274 47.180652) (xy 130.942745 46.991315) (xy 131.008409 46.789221) (xy 131.04165 46.57935) + (xy 131.04165 46.573101) (xy 131.041649 46.5731) (xy 130.124662 46.5731) (xy 130.157575 46.516093) + (xy 130.19165 46.388926) (xy 130.19165 46.257274) (xy 130.157575 46.130107) (xy 130.124662 46.0731) + (xy 131.041649 46.0731) (xy 131.04165 46.073099) (xy 131.04165 46.066849) (xy 131.008409 45.856978) + (xy 130.942745 45.654884) (xy 130.905933 45.582636) (xy 130.885013 45.541578) (xy 134.79115 45.541578) + (xy 134.79115 47.104621) (xy 134.791151 47.104623) (xy 134.806002 47.198399) (xy 134.806004 47.198404) + (xy 134.8636 47.311442) (xy 134.953308 47.40115) (xy 135.066346 47.458746) (xy 135.160131 47.4736) + (xy 136.423168 47.473599) (xy 136.423171 47.473599) (xy 136.423172 47.473598) (xy 136.470061 47.466172) + (xy 136.516949 47.458747) (xy 136.516949 47.458746) (xy 136.516954 47.458746) (xy 136.629992 47.40115) + (xy 136.7197 47.311442) (xy 136.777296 47.198404) (xy 136.79215 47.104619) (xy 136.792149 45.541582) + (xy 136.792149 45.541581) (xy 136.792149 45.541578) (xy 136.792148 45.541576) (xy 136.777297 45.4478) + (xy 136.777296 45.447798) (xy 136.777296 45.447796) (xy 136.7197 45.334758) (xy 136.629992 45.24505) + (xy 136.516954 45.187454) (xy 136.516955 45.187454) (xy 136.423171 45.1726) (xy 135.160128 45.1726) + (xy 135.160126 45.172601) (xy 135.06635 45.187452) (xy 135.066345 45.187454) (xy 134.953309 45.245049) + (xy 134.863599 45.334759) (xy 134.806004 45.447795) (xy 134.79115 45.541578) (xy 130.885013 45.541578) + (xy 130.846274 45.465547) (xy 130.721372 45.293635) (xy 130.571114 45.143377) (xy 130.399202 45.018475) + (xy 130.209865 44.922004) (xy 130.00777 44.85634) (xy 129.94165 44.845867) (xy 129.94165 45.890088) + (xy 129.884643 45.857175) (xy 129.757476 45.8231) (xy 129.625824 45.8231) (xy 129.498657 45.857175) + (xy 129.44165 45.890088) (xy 129.44165 44.845868) (xy 129.441649 44.845867) (xy 129.37553 44.85634) + (xy 129.375528 44.85634) (xy 129.173434 44.922004) (xy 128.984097 45.018475) (xy 128.812185 45.143377) + (xy 128.661927 45.293635) (xy 128.537025 45.465547) (xy 128.440554 45.654884) (xy 128.385304 45.824929) + (xy 128.34934 45.874429) (xy 128.291149 45.893336) (xy 128.232958 45.874429) (xy 128.196994 45.824929) + (xy 128.192149 45.794336) (xy 128.192149 45.541578) (xy 128.192148 45.541576) (xy 128.177297 45.4478) + (xy 128.177296 45.447798) (xy 128.177296 45.447796) (xy 128.1197 45.334758) (xy 128.029992 45.24505) + (xy 127.916954 45.187454) (xy 127.916955 45.187454) (xy 127.823171 45.1726) (xy 126.560128 45.1726) + (xy 126.560126 45.172601) (xy 126.46635 45.187452) (xy 126.466345 45.187454) (xy 126.353309 45.245049) + (xy 126.263599 45.334759) (xy 126.206004 45.447795) (xy 126.19115 45.541578) (xy 122.372275 45.541578) + (xy 122.346274 45.490547) (xy 122.221372 45.318635) (xy 122.071114 45.168377) (xy 121.899202 45.043475) + (xy 121.709865 44.947004) (xy 121.50777 44.88134) (xy 121.44165 44.870867) (xy 121.44165 45.918954) + (xy 121.374993 45.88047) (xy 121.254185 45.8481) (xy 121.129115 45.8481) (xy 121.008307 45.88047) + (xy 120.94165 45.918954) (xy 120.94165 44.870868) (xy 120.941649 44.870867) (xy 120.87553 44.88134) + (xy 120.875528 44.88134) (xy 120.673434 44.947004) (xy 120.484097 45.043475) (xy 120.312185 45.168377) + (xy 120.161927 45.318635) (xy 120.037025 45.490547) (xy 119.940554 45.679884) (xy 119.874891 45.881977) + (xy 119.861423 45.967007) (xy 119.833645 46.021523) (xy 119.779128 46.0493) (xy 119.718696 46.039728) + (xy 119.675432 45.996463) (xy 119.666545 45.970836) (xy 119.653701 45.906265) (xy 119.578282 45.724186) + (xy 119.468789 45.560318) (xy 119.329432 45.420961) (xy 119.219938 45.347799) (xy 119.165563 45.311467) + (xy 118.983485 45.236049) (xy 118.790193 45.1976) (xy 118.790191 45.1976) (xy 118.593109 45.1976) + (xy 118.593106 45.1976) (xy 118.399815 45.236049) (xy 118.399813 45.236049) (xy 118.217736 45.311467) + (xy 118.053868 45.420961) (xy 118.053864 45.420964) (xy 117.914514 45.560314) (xy 117.914511 45.560318) + (xy 117.805017 45.724186) (xy 117.729599 45.906263) (xy 117.729599 45.906265) (xy 117.69115 46.099556) + (xy 117.192149 46.099556) (xy 117.192149 45.566582) (xy 117.192149 45.566581) (xy 117.192149 45.566578) + (xy 117.192148 45.566576) (xy 117.177297 45.4728) (xy 117.177296 45.472798) (xy 117.177296 45.472796) + (xy 117.1197 45.359758) (xy 117.029992 45.27005) (xy 116.916954 45.212454) (xy 116.916955 45.212454) + (xy 116.823171 45.1976) (xy 115.560128 45.1976) (xy 115.560126 45.197601) (xy 115.46635 45.212452) + (xy 115.466345 45.212454) (xy 115.353309 45.270049) (xy 115.263599 45.359759) (xy 115.206004 45.472795) + (xy 115.19115 45.566578) (xy 112.19215 45.566578) (xy 112.19215 45.458281) (xy 112.192149 45.458272) + (xy 112.185614 45.425427) (xy 112.183417 45.414378) (xy 112.150154 45.364596) (xy 112.142913 45.359758) + (xy 112.100374 45.331334) (xy 112.10037 45.331332) (xy 112.056477 45.3226) (xy 112.05647 45.3226) + (xy 110.32683 45.3226) (xy 110.326822 45.3226) (xy 110.282929 45.331332) (xy 110.282925 45.331334) + (xy 110.233148 45.364594) (xy 110.233144 45.364598) (xy 110.199884 45.414375) (xy 110.199882 45.414379) + (xy 110.19115 45.458272) (xy 110.19115 47.1253) (xy 110.172243 47.183491) (xy 110.122743 47.219455) + (xy 110.09215 47.2243) (xy 108.139818 47.2243) (xy 108.081627 47.205393) (xy 108.069814 47.195304) + (xy 107.54711 46.6726) (xy 106.985247 46.110736) (xy 106.985245 46.110735) (xy 106.985244 46.110734) + (xy 106.893179 46.0726) (xy 106.893178 46.0726) (xy 106.768034 46.0726) (xy 106.709843 46.053693) + (xy 106.673879 46.004193) (xy 106.670938 45.992922) (xy 106.653701 45.906265) (xy 106.578282 45.724186) + (xy 106.468789 45.560318) (xy 106.329432 45.420961) (xy 106.219938 45.347799) (xy 106.165563 45.311467) + (xy 105.983485 45.236049) (xy 105.790193 45.1976) (xy 105.790191 45.1976) (xy 105.593109 45.1976) + (xy 105.593106 45.1976) (xy 105.399815 45.236049) (xy 105.399813 45.236049) (xy 105.217736 45.311467) + (xy 105.053868 45.420961) (xy 105.053864 45.420964) (xy 104.914514 45.560314) (xy 104.914511 45.560318) + (xy 104.805017 45.724186) (xy 104.729599 45.906263) (xy 104.729599 45.906265) (xy 104.69115 46.099556) + (xy 104.192149 46.099556) (xy 104.153701 45.906265) (xy 104.078282 45.724186) (xy 103.968789 45.560318) + (xy 103.829432 45.420961) (xy 103.719938 45.347799) (xy 103.665563 45.311467) (xy 103.483485 45.236049) + (xy 103.290193 45.1976) (xy 103.290191 45.1976) (xy 103.093109 45.1976) (xy 103.093106 45.1976) + (xy 102.899815 45.236049) (xy 102.899813 45.236049) (xy 102.717736 45.311467) (xy 102.553868 45.420961) + (xy 102.553864 45.420964) (xy 102.414514 45.560314) (xy 102.414511 45.560318) (xy 102.305017 45.724186) + (xy 102.229599 45.906263) (xy 102.216755 45.970834) (xy 102.186857 46.024218) (xy 102.131292 46.049833) + (xy 102.071283 46.037896) (xy 102.02975 45.992965) (xy 102.021876 45.967006) (xy 102.008409 45.881978) + (xy 101.942745 45.679884) (xy 101.846274 45.490547) (xy 101.721372 45.318635) (xy 101.571114 45.168377) (xy 101.399202 45.043475) (xy 101.209865 44.947004) (xy 101.00777 44.88134) (xy 100.94165 44.870867) (xy 100.94165 45.918954) (xy 100.874993 45.88047) (xy 100.754185 45.8481) (xy 100.629115 45.8481) (xy 100.508307 45.88047) (xy 100.44165 45.918954) (xy 100.44165 44.870868) (xy 100.441649 44.870867) (xy 100.37553 44.88134) (xy 100.375528 44.88134) (xy 100.173434 44.947004) (xy 99.984097 45.043475) - (xy 99.812185 45.168377) (xy 99.661927 45.318635) (xy 99.537025 45.490548) (xy 99.520765 45.52246) - (xy 99.477499 45.565724) (xy 99.417067 45.575294) (xy 99.362551 45.547515) (xy 99.334775 45.492998) - (xy 99.334262 45.489315) (xy 99.332627 45.4757) (xy 99.331527 45.466536) (xy 99.276011 45.325758) - (xy 99.184572 45.205178) (xy 99.063992 45.113739) (xy 99.063991 45.113738) (xy 99.063989 45.113737) - (xy 98.923215 45.058223) (xy 98.834756 45.0476) (xy 98.834752 45.0476) (xy 97.548548 45.0476) (xy 97.548543 45.0476) - (xy 97.460084 45.058223) (xy 97.31931 45.113737) (xy 97.319306 45.11374) (xy 97.198731 45.205175) - (xy 97.198725 45.205181) (xy 97.10729 45.325756) (xy 97.107287 45.32576) (xy 97.051773 45.466534) - (xy 97.04115 45.554993) (xy 97.04115 45.8236) (xy 97.022243 45.881791) (xy 96.972743 45.917755) - (xy 96.94215 45.9226) (xy 95.074094 45.9226) (xy 95.015903 45.903693) (xy 95.004091 45.893604) (xy 94.953068 45.842582) - (xy 94.953066 45.84258) (xy 94.816134 45.763523) (xy 94.663407 45.7226) (xy 94.505293 45.7226) (xy 94.352566 45.763523) - (xy 94.215634 45.84258) (xy 94.10383 45.954384) (xy 94.024773 46.091316) (xy 93.98385 46.244043) - (xy 86.796717 46.244043) (xy 86.829043 46.188054) (xy 86.84918 46.153175) (xy 86.854874 46.143312) - (xy 86.854878 46.143304) (xy 86.893386 46.050335) (xy 86.947704 45.9192) (xy 87.010488 45.684889) - (xy 87.04215 45.444388) (xy 87.04215 45.201812) (xy 87.010488 44.961311) (xy 86.947704 44.727) (xy 86.854874 44.502888) - (xy 86.733586 44.292811) (xy 86.718471 44.273113) (xy 86.71847 44.273112) (xy 153.39165 44.273112) - (xy 153.39165 45.573099) (xy 153.391651 45.5731) (xy 154.441649 45.5731) (xy 154.44165 45.573099) - (xy 154.44165 43.573101) (xy 154.94165 43.573101) (xy 154.94165 45.573099) (xy 154.941651 45.5731) - (xy 155.991648 45.5731) (xy 155.991649 45.573099) (xy 155.991649 45.031951) (xy 166.89115 45.031951) - (xy 166.89115 45.614248) (xy 166.901291 45.698691) (xy 166.954284 45.833072) (xy 166.954285 45.833074) - (xy 166.954286 45.833075) (xy 167.041572 45.948178) (xy 167.156675 46.035464) (xy 167.156676 46.035464) - (xy 167.156677 46.035465) (xy 167.194385 46.050335) (xy 167.29106 46.088459) (xy 167.375506 46.0986) - (xy 167.703104 46.0986) (xy 167.761295 46.117507) (xy 167.797259 46.167007) (xy 167.798721 46.171945) - (xy 167.835173 46.307984) (xy 167.91423 46.444916) (xy 168.026034 46.55672) (xy 168.162966 46.635777) - (xy 168.315693 46.6767) (xy 168.315695 46.6767) (xy 168.473805 46.6767) (xy 168.473807 46.6767) - (xy 168.626534 46.635777) (xy 168.763466 46.55672) (xy 168.87527 46.444916) (xy 168.954327 46.307984) - (xy 168.985253 46.192563) (xy 169.018576 46.141251) (xy 169.075697 46.119324) (xy 169.100192 46.12109) - (xy 169.112808 46.1236) (xy 169.112809 46.1236) (xy 169.270491 46.1236) (xy 169.270492 46.1236) - (xy 169.386613 46.100501) (xy 169.405927 46.0986) (xy 169.457792 46.0986) (xy 169.457794 46.0986) - (xy 169.54224 46.088459) (xy 169.676625 46.035464) (xy 169.791728 45.948178) (xy 169.879014 45.833075) - (xy 169.913961 45.744454) (xy 169.936054 45.710773) (xy 170.699133 44.947696) (xy 170.753649 44.919919) - (xy 170.769136 44.9187) (xy 172.19454 44.9187) (xy 172.252731 44.937607) (xy 172.288695 44.987107) - (xy 172.288695 45.048293) (xy 172.28601 45.055568) (xy 172.277848 45.075272) (xy 172.271912 45.089604) - (xy 172.24115 45.244255) (xy 172.24115 45.534644) (xy 172.253178 45.595109) (xy 172.270041 45.679888) - (xy 172.271913 45.689296) (xy 172.271913 45.689298) (xy 172.332253 45.834974) (xy 172.332259 45.834985) - (xy 172.371428 45.893604) (xy 172.419861 45.966089) (xy 173.763261 47.309489) (xy 173.894371 47.397094) - (xy 174.040053 47.457438) (xy 174.194708 47.4882) (xy 174.352393 47.4882) (xy 174.96715 47.4882) - (xy 175.025341 47.507107) (xy 175.061305 47.556607) (xy 175.06615 47.5872) (xy 175.06615 47.966198) - (xy 175.047243 48.024389) (xy 175.037154 48.036202) (xy 173.807457 49.265898) (xy 173.75294 49.293675) - (xy 173.692508 49.284104) (xy 173.687954 49.281631) (xy 173.603935 49.233123) (xy 173.553025 49.219482) - (xy 173.451207 49.1922) (xy 173.293093 49.1922) (xy 173.140366 49.233123) (xy 173.010299 49.308217) - (xy 173.003431 49.312182) (xy 172.952409 49.363204) (xy 172.945292 49.366829) (xy 172.940597 49.373293) - (xy 172.918545 49.380457) (xy 172.897892 49.390981) (xy 172.882406 49.3922) (xy 172.780856 49.3922) - (xy 172.78084 49.392199) (xy 172.774777 49.392199) (xy 172.669323 49.392199) (xy 172.581667 49.415687) - (xy 172.581666 49.415686) (xy 172.567462 49.419493) (xy 172.567459 49.419494) (xy 172.476137 49.472219) - (xy 172.401569 49.546786) (xy 172.40157 49.546787) (xy 171.754753 50.193604) (xy 171.700236 50.221381) - (xy 171.684749 50.2226) (xy 170.812375 50.2226) (xy 170.781955 50.225453) (xy 170.781946 50.225455) - (xy 170.653766 50.270307) (xy 170.544505 50.350945) (xy 170.544495 50.350955) (xy 170.463857 50.460216) - (xy 170.419005 50.588396) (xy 170.419003 50.588405) (xy 170.41615 50.618825) (xy 170.41615 51.027374) - (xy 170.419003 51.057794) (xy 170.419005 51.057803) (xy 170.463857 51.185983) (xy 170.544495 51.295244) - (xy 170.544497 51.295246) (xy 170.5445 51.29525) (xy 170.544503 51.295252) (xy 170.544505 51.295254) - (xy 170.657224 51.378445) (xy 170.692817 51.428213) (xy 170.692359 51.489396) (xy 170.657224 51.537755) - (xy 170.544505 51.620945) (xy 170.544495 51.620955) (xy 170.463857 51.730216) (xy 170.419005 51.858396) - (xy 170.419003 51.858405) (xy 170.41615 51.888825) (xy 170.41615 52.297374) (xy 170.419003 52.327794) - (xy 170.419005 52.327803) (xy 170.463857 52.455983) (xy 170.544495 52.565244) (xy 170.544497 52.565246) - (xy 170.5445 52.56525) (xy 170.544503 52.565252) (xy 170.544505 52.565254) (xy 170.657224 52.648445) - (xy 170.692817 52.698213) (xy 170.692359 52.759396) (xy 170.657224 52.807755) (xy 170.544505 52.890945) - (xy 170.544495 52.890955) (xy 170.463857 53.000216) (xy 170.419005 53.128396) (xy 170.419003 53.128405) - (xy 170.41615 53.158825) (xy 170.41615 53.567374) (xy 170.419003 53.597794) (xy 170.419005 53.597803) - (xy 170.463857 53.725983) (xy 170.544495 53.835244) (xy 170.544497 53.835246) (xy 170.5445 53.83525) - (xy 170.544503 53.835252) (xy 170.544504 53.835253) (xy 170.60731 53.881606) (xy 170.642903 53.931373) - (xy 170.642445 53.992557) (xy 170.606112 54.041787) (xy 170.586408 54.052725) (xy 170.497371 54.089605) - (xy 170.366261 54.177211) (xy 170.366257 54.177214) (xy 169.691164 54.852307) (xy 169.691161 54.852311) - (xy 169.603559 54.983414) (xy 169.603553 54.983425) (xy 169.543213 55.129101) (xy 169.543213 55.129103) - (xy 169.51245 55.283755) (xy 169.51245 55.441444) (xy 169.520291 55.480863) (xy 169.538737 55.573597) - (xy 169.543213 55.596096) (xy 169.543213 55.596098) (xy 169.603553 55.741774) (xy 169.603559 55.741785) - (xy 169.649284 55.810216) (xy 169.691161 55.872889) (xy 169.802661 55.984389) (xy 169.880826 56.036617) - (xy 169.933764 56.07199) (xy 169.933775 56.071996) (xy 169.987588 56.094285) (xy 170.079453 56.132337) - (xy 170.234108 56.1631) (xy 170.234109 56.1631) (xy 170.391791 56.1631) (xy 170.391792 56.1631) - (xy 170.546447 56.132337) (xy 170.692129 56.071994) (xy 170.823239 55.984389) (xy 171.179132 55.628496) - (xy 171.186249 55.624869) (xy 171.190945 55.618407) (xy 171.212993 55.611243) (xy 171.233649 55.600719) - (xy 171.249136 55.5995) (xy 171.319064 55.5995) (xy 171.377255 55.618407) (xy 171.389068 55.628496) - (xy 171.700461 55.939889) (xy 171.811961 56.051389) (xy 171.842793 56.07199) (xy 171.943064 56.13899) - (xy 171.943075 56.138996) (xy 171.996888 56.161285) (xy 172.088753 56.199337) (xy 172.243408 56.2301) - (xy 172.243409 56.2301) (xy 178.646191 56.2301) (xy 178.646192 56.2301) (xy 178.800847 56.199337) - (xy 178.946529 56.138994) (xy 179.077639 56.051389) (xy 183.092717 52.036309) (xy 183.147234 52.008533) - (xy 183.207666 52.018104) (xy 183.232721 52.036307) (xy 183.276034 52.07962) (xy 183.412966 52.158677) - (xy 183.565693 52.1996) (xy 183.565695 52.1996) (xy 183.723805 52.1996) (xy 183.723807 52.1996) - (xy 183.876534 52.158677) (xy 184.013466 52.07962) (xy 184.047412 52.045674) (xy 184.064491 52.028596) - (xy 184.119008 52.000819) (xy 184.134494 51.9996) (xy 202.205875 51.9996) (xy 202.205877 51.9996) - (xy 202.307738 51.972307) (xy 202.30774 51.972305) (xy 202.307742 51.972305) (xy 202.399058 51.919583) - (xy 202.399058 51.919582) (xy 202.399063 51.91958) (xy 205.191046 49.127594) (xy 205.245563 49.099818) - (xy 205.26105 49.098599) (xy 205.677017 49.098599) (xy 205.677022 49.098599) (xy 205.736633 49.092191) - (xy 205.832843 49.056307) (xy 205.871479 49.041897) (xy 205.871479 49.041896) (xy 205.871481 49.041896) - (xy 205.986696 48.955646) (xy 206.072946 48.840431) (xy 206.074309 48.836778) (xy 206.110242 48.740435) - (xy 206.123241 48.705583) (xy 206.12965 48.645973) (xy 206.129649 48.000228) (xy 206.123241 47.940617) - (xy 206.119041 47.929355) (xy 206.072947 47.80577) (xy 205.986699 47.690558) (xy 205.986698 47.690557) - (xy 205.986696 47.690554) (xy 205.986691 47.69055) (xy 205.871479 47.604302) (xy 205.736638 47.55401) - (xy 205.736633 47.554009) (xy 205.736631 47.554008) (xy 205.736627 47.554008) (xy 205.705399 47.55065) - (xy 205.677023 47.5476) (xy 205.67702 47.5476) (xy 205.181283 47.5476) (xy 205.181279 47.5476) (xy 205.181278 47.547601) - (xy 205.174099 47.548372) (xy 205.121669 47.554008) (xy 205.121664 47.554009) (xy 204.98682 47.604302) - (xy 204.871608 47.69055) (xy 204.8716 47.690558) (xy 204.785352 47.80577) (xy 204.73506 47.940611) - (xy 204.735058 47.940622) (xy 204.730683 47.981309) (xy 204.729773 47.989787) (xy 204.72865 48.000229) - (xy 204.72865 48.416199) (xy 204.709743 48.47439) (xy 204.699654 48.486203) (xy 202.016253 51.169604) - (xy 201.961736 51.197381) (xy 201.946249 51.1986) (xy 191.715051 51.1986) (xy 191.65686 51.179693) - (xy 191.620896 51.130193) (xy 191.620896 51.069007) (xy 191.645047 51.029596) (xy 193.547047 49.127595) - (xy 193.601564 49.099818) (xy 193.617051 49.098599) (xy 193.677017 49.098599) (xy 193.677022 49.098599) - (xy 193.736633 49.092191) (xy 193.832843 49.056307) (xy 193.871479 49.041897) (xy 193.871479 49.041896) - (xy 193.871481 49.041896) (xy 193.986696 48.955646) (xy 194.072946 48.840431) (xy 194.074309 48.836778) - (xy 194.110242 48.740435) (xy 194.123241 48.705583) (xy 194.12965 48.645973) (xy 194.129649 48.000228) - (xy 194.123241 47.940617) (xy 194.119041 47.929355) (xy 194.072947 47.80577) (xy 193.986699 47.690558) - (xy 193.986698 47.690557) (xy 193.986696 47.690554) (xy 193.986691 47.69055) (xy 193.871479 47.604302) - (xy 193.736638 47.55401) (xy 193.736633 47.554009) (xy 193.736631 47.554008) (xy 193.736627 47.554008) - (xy 193.705399 47.55065) (xy 193.677023 47.5476) (xy 193.67702 47.5476) (xy 193.181283 47.5476) - (xy 193.181279 47.5476) (xy 193.181278 47.547601) (xy 193.174099 47.548372) (xy 193.121669 47.554008) - (xy 193.121664 47.554009) (xy 192.98682 47.604302) (xy 192.871608 47.69055) (xy 192.8716 47.690558) - (xy 192.785352 47.80577) (xy 192.73506 47.940611) (xy 192.735058 47.940622) (xy 192.730683 47.981309) - (xy 192.729773 47.989787) (xy 192.72865 48.000229) (xy 192.72865 48.645966) (xy 192.728651 48.64597) - (xy 192.735058 48.705582) (xy 192.736682 48.709934) (xy 192.74032 48.719688) (xy 192.742941 48.780816) - (xy 192.717566 48.824288) (xy 192.661153 48.880702) (xy 192.606637 48.90848) (xy 192.546205 48.898909) - (xy 192.50294 48.855645) (xy 192.492149 48.810699) (xy 192.492149 46.178239) (xy 192.492149 46.178236) - (xy 192.489235 46.153109) (xy 192.443856 46.050335) (xy 192.364415 45.970894) (xy 192.261641 45.925515) - (xy 192.26164 45.925514) (xy 192.261638 45.925514) (xy 192.236518 45.9226) (xy 190.146789 45.9226) - (xy 190.146786 45.922601) (xy 190.121659 45.925514) (xy 190.018885 45.970894) (xy 189.939444 46.050335) - (xy 189.894064 46.153111) (xy 189.89115 46.17823) (xy 189.89115 49.46796) (xy 189.891151 49.467963) - (xy 189.894065 49.493094) (xy 189.895949 49.500018) (xy 189.89298 49.561131) (xy 189.882737 49.581006) - (xy 189.821458 49.672716) (xy 189.821453 49.672725) (xy 189.761113 49.818401) (xy 189.761113 49.818403) - (xy 189.73035 49.973055) (xy 189.73035 50.130744) (xy 189.760198 50.280799) (xy 189.753006 50.34156) - (xy 189.711474 50.38649) (xy 189.651464 50.398427) (xy 189.647236 50.397614) (xy 189.641807 50.3969) - (xy 189.483693 50.3969) (xy 189.330966 50.437823) (xy 189.194034 50.51688) (xy 189.08223 50.628684) - (xy 189.003173 50.765616) (xy 188.964833 50.908705) (xy 188.96225 50.918344) (xy 188.96225 51.076456) - (xy 188.963097 51.082889) (xy 188.961105 51.083151) (xy 188.958384 51.135078) (xy 188.919878 51.182628) - (xy 188.865959 51.1986) (xy 184.134494 51.1986) (xy 184.076303 51.179693) (xy 184.064491 51.169604) - (xy 184.013468 51.118582) (xy 184.013466 51.11858) (xy 183.876534 51.039523) (xy 183.723807 50.9986) - (xy 183.565693 50.9986) (xy 183.565688 50.9986) (xy 183.55237 51.002169) (xy 183.491269 50.998965) - (xy 183.44372 50.960459) (xy 183.42775 50.906542) (xy 183.42775 50.351185) (xy 183.446657 50.292994) - (xy 183.45674 50.281187) (xy 183.985334 49.752593) (xy 184.039849 49.724818) (xy 184.055336 49.723599) - (xy 184.436511 49.723599) (xy 184.436514 49.723599) (xy 184.461641 49.720685) (xy 184.564415 49.675306) - (xy 184.643856 49.595865) (xy 184.689235 49.493091) (xy 184.69215 49.467965) (xy 184.692149 46.178236) - (xy 184.689235 46.153109) (xy 184.643856 46.050335) (xy 184.564415 45.970894) (xy 184.461641 45.925515) - (xy 184.46164 45.925514) (xy 184.461638 45.925514) (xy 184.436518 45.9226) (xy 182.346789 45.9226) - (xy 182.346786 45.922601) (xy 182.321659 45.925514) (xy 182.218885 45.970894) (xy 182.139444 46.050335) - (xy 182.094064 46.153111) (xy 182.09115 46.17823) (xy 182.09115 46.333614) (xy 182.072243 46.391805) - (xy 182.022743 46.427769) (xy 181.961557 46.427769) (xy 181.922146 46.403618) (xy 180.091629 44.573101) - (xy 192.32915 44.573101) (xy 192.32915 44.828916) (xy 192.339556 44.93077) (xy 192.394245 45.095812) - (xy 192.485518 45.243788) (xy 192.608461 45.366731) (xy 192.756437 45.458004) (xy 192.921479 45.512693) - (xy 193.023334 45.5231) (xy 193.066649 45.5231) (xy 193.06665 45.523099) (xy 193.06665 44.573101) - (xy 193.066649 44.5731) (xy 192.329151 44.5731) (xy 192.32915 44.573101) (xy 180.091629 44.573101) - (xy 179.335811 43.817283) (xy 192.32915 43.817283) (xy 192.32915 44.073099) (xy 192.329151 44.0731) - (xy 193.066649 44.0731) (xy 193.06665 44.073099) (xy 193.06665 43.123101) (xy 193.56665 43.123101) - (xy 193.56665 45.523099) (xy 193.566651 45.5231) (xy 193.609966 45.5231) (xy 193.71182 45.512693) - (xy 193.876862 45.458004) (xy 194.024838 45.366731) (xy 194.147781 45.243788) (xy 194.239054 45.095812) - (xy 194.266673 45.012463) (xy 194.302924 44.963173) (xy 194.361224 44.944605) (xy 194.419303 44.96385) - (xy 194.452745 45.007283) (xy 194.469038 45.048599) (xy 194.476336 45.058223) (xy 194.559439 45.167811) - (xy 194.620483 45.214102) (xy 194.639469 45.228499) (xy 194.674411 45.278725) (xy 194.67865 45.307383) - (xy 194.67865 47.523433) (xy 194.659743 47.581624) (xy 194.638979 47.602686) (xy 194.521608 47.69055) - (xy 194.5216 47.690558) (xy 194.435352 47.80577) (xy 194.38506 47.940611) (xy 194.385058 47.940622) - (xy 194.380683 47.981309) (xy 194.379773 47.989787) (xy 194.37865 48.000229) (xy 194.37865 48.645966) - (xy 194.378651 48.64597) (xy 194.385058 48.70558) (xy 194.385059 48.705585) (xy 194.435352 48.840429) - (xy 194.504405 48.932671) (xy 194.521604 48.955646) (xy 194.521607 48.955648) (xy 194.521608 48.955649) - (xy 194.63682 49.041897) (xy 194.771661 49.092189) (xy 194.771662 49.092189) (xy 194.771667 49.092191) - (xy 194.831277 49.0986) (xy 195.327022 49.098599) (xy 195.386633 49.092191) (xy 195.386638 49.092189) - (xy 195.392657 49.090767) (xy 195.393232 49.093202) (xy 195.443817 49.091009) (xy 195.494829 49.124794) - (xy 195.503065 49.136893) (xy 195.53743 49.196416) (xy 195.649234 49.30822) (xy 195.786166 49.387277) - (xy 195.938893 49.4282) (xy 195.938895 49.4282) (xy 196.097005 49.4282) (xy 196.097007 49.4282) - (xy 196.249734 49.387277) (xy 196.386666 49.30822) (xy 196.417404 49.277482) (xy 196.437691 49.257196) - (xy 196.492208 49.229419) (xy 196.507694 49.2282) (xy 196.977275 49.2282) (xy 196.977277 49.2282) - (xy 197.079138 49.200907) (xy 197.07914 49.200905) (xy 197.079142 49.200905) (xy 197.170458 49.148183) - (xy 197.170458 49.148182) (xy 197.170463 49.14818) (xy 197.191048 49.127594) (xy 197.245564 49.099818) - (xy 197.261051 49.098599) (xy 197.677017 49.098599) (xy 197.677022 49.098599) (xy 197.736633 49.092191) - (xy 197.832843 49.056307) (xy 197.871479 49.041897) (xy 197.871479 49.041896) (xy 197.871481 49.041896) - (xy 197.986696 48.955646) (xy 198.072946 48.840431) (xy 198.074309 48.836778) (xy 198.110242 48.740435) - (xy 198.123241 48.705583) (xy 198.12965 48.645973) (xy 198.129649 48.000228) (xy 198.123241 47.940617) - (xy 198.119041 47.929355) (xy 198.072947 47.80577) (xy 197.986699 47.690558) (xy 197.986698 47.690557) - (xy 197.986696 47.690554) (xy 197.986691 47.69055) (xy 197.871479 47.604302) (xy 197.736638 47.55401) - (xy 197.736633 47.554009) (xy 197.736631 47.554008) (xy 197.736627 47.554008) (xy 197.705399 47.55065) - (xy 197.677023 47.5476) (xy 197.67702 47.5476) (xy 197.181283 47.5476) (xy 197.181279 47.5476) (xy 197.181278 47.547601) - (xy 197.174099 47.548372) (xy 197.121669 47.554008) (xy 197.121664 47.554009) (xy 196.98682 47.604302) - (xy 196.871608 47.69055) (xy 196.8716 47.690558) (xy 196.785352 47.80577) (xy 196.73506 47.940611) - (xy 196.735058 47.940622) (xy 196.730683 47.981309) (xy 196.72865 48.000227) (xy 196.72865 48.194769) - (xy 196.728651 48.3282) (xy 196.723806 48.343111) (xy 196.723806 48.358793) (xy 196.714588 48.371479) - (xy 196.709744 48.38639) (xy 196.697059 48.395605) (xy 196.687842 48.408293) (xy 196.672929 48.413138) - (xy 196.660244 48.422355) (xy 196.629651 48.4272) (xy 196.507694 48.4272) (xy 196.449503 48.408293) - (xy 196.437691 48.398204) (xy 196.386668 48.347182) (xy 196.386666 48.34718) (xy 196.249734 48.268123) - (xy 196.097007 48.2272) (xy 195.938893 48.2272) (xy 195.90427 48.236476) (xy 195.84317 48.233274) - (xy 195.79562 48.194769) (xy 195.779649 48.14085) (xy 195.779649 48.000233) (xy 195.779649 48.000228) - (xy 195.773241 47.940617) (xy 195.769041 47.929355) (xy 195.722947 47.80577) (xy 195.636699 47.690558) - (xy 195.636698 47.690557) (xy 195.636696 47.690554) (xy 195.636691 47.69055) (xy 195.519321 47.602686) - (xy 195.484068 47.552677) (xy 195.47965 47.523433) (xy 195.47965 45.411225) (xy 195.498557 45.353034) - (xy 195.548057 45.31707) (xy 195.56123 45.314169) (xy 195.565467 45.313097) (xy 195.565471 45.313097) - (xy 195.675241 45.269808) (xy 195.704648 45.258212) (xy 195.704648 45.258211) (xy 195.70465 45.258211) - (xy 195.823861 45.167811) (xy 195.914261 45.0486) (xy 195.914656 45.0476) (xy 195.938511 44.987107) - (xy 195.969147 44.909421) (xy 195.97965 44.82196) (xy 195.97965 44.573101) (xy 196.32915 44.573101) - (xy 196.32915 44.828916) (xy 196.339556 44.93077) (xy 196.394245 45.095812) (xy 196.485518 45.243788) - (xy 196.608461 45.366731) (xy 196.756437 45.458004) (xy 196.921479 45.512693) (xy 197.023334 45.5231) - (xy 197.066649 45.5231) (xy 197.06665 45.523099) (xy 197.06665 44.573101) (xy 197.066649 44.5731) - (xy 196.329151 44.5731) (xy 196.32915 44.573101) (xy 195.97965 44.573101) (xy 195.97965 43.82424) - (xy 195.978815 43.817283) (xy 196.32915 43.817283) (xy 196.32915 44.073099) (xy 196.329151 44.0731) - (xy 197.066649 44.0731) (xy 197.06665 44.073099) (xy 197.06665 43.123101) (xy 197.56665 43.123101) - (xy 197.56665 45.523099) (xy 197.566651 45.5231) (xy 197.609966 45.5231) (xy 197.71182 45.512693) - (xy 197.876862 45.458004) (xy 198.024838 45.366731) (xy 198.147781 45.243788) (xy 198.239054 45.095812) - (xy 198.266673 45.012463) (xy 198.302924 44.963173) (xy 198.361224 44.944605) (xy 198.419303 44.96385) - (xy 198.452745 45.007283) (xy 198.469038 45.048599) (xy 198.476336 45.058223) (xy 198.559439 45.167811) - (xy 198.620483 45.214102) (xy 198.639469 45.228499) (xy 198.674411 45.278725) (xy 198.67865 45.307383) - (xy 198.67865 47.523433) (xy 198.659743 47.581624) (xy 198.638979 47.602686) (xy 198.521608 47.69055) - (xy 198.5216 47.690558) (xy 198.435352 47.80577) (xy 198.38506 47.940611) (xy 198.385058 47.940622) - (xy 198.380683 47.981309) (xy 198.379773 47.989787) (xy 198.37865 48.000229) (xy 198.37865 48.645966) - (xy 198.378651 48.64597) (xy 198.385058 48.70558) (xy 198.385059 48.705585) (xy 198.435352 48.840429) - (xy 198.504405 48.932671) (xy 198.521604 48.955646) (xy 198.521607 48.955648) (xy 198.521608 48.955649) - (xy 198.63682 49.041897) (xy 198.771661 49.092189) (xy 198.771662 49.092189) (xy 198.771667 49.092191) - (xy 198.831277 49.0986) (xy 199.327022 49.098599) (xy 199.386633 49.092191) (xy 199.482843 49.056307) - (xy 199.521479 49.041897) (xy 199.521479 49.041896) (xy 199.521481 49.041896) (xy 199.572117 49.003988) - (xy 199.63003 48.984252) (xy 199.680944 48.997505) (xy 199.775466 49.052077) (xy 199.928193 49.093) - (xy 199.928195 49.093) (xy 200.086305 49.093) (xy 200.086307 49.093) (xy 200.239034 49.052077) (xy 200.375966 48.97302) - (xy 200.40961 48.939376) (xy 200.426991 48.921996) (xy 200.481508 48.894219) (xy 200.496994 48.893) - (xy 200.775152 48.893) (xy 200.833343 48.911907) (xy 200.854404 48.93267) (xy 200.871604 48.955646) - (xy 200.871607 48.955648) (xy 200.871608 48.955649) (xy 200.98682 49.041897) (xy 201.121661 49.092189) - (xy 201.121662 49.092189) (xy 201.121667 49.092191) (xy 201.181277 49.0986) (xy 201.677022 49.098599) - (xy 201.736633 49.092191) (xy 201.832843 49.056307) (xy 201.871479 49.041897) (xy 201.871479 49.041896) - (xy 201.871481 49.041896) (xy 201.986696 48.955646) (xy 202.072946 48.840431) (xy 202.074309 48.836778) - (xy 202.110242 48.740435) (xy 202.123241 48.705583) (xy 202.12965 48.645973) (xy 202.129649 48.000228) - (xy 202.123241 47.940617) (xy 202.119041 47.929355) (xy 202.072947 47.80577) (xy 201.986699 47.690558) - (xy 201.986698 47.690557) (xy 201.986696 47.690554) (xy 201.986691 47.69055) (xy 201.871479 47.604302) - (xy 201.736638 47.55401) (xy 201.736633 47.554009) (xy 201.736631 47.554008) (xy 201.736627 47.554008) - (xy 201.705399 47.55065) (xy 201.677023 47.5476) (xy 201.67702 47.5476) (xy 201.181283 47.5476) - (xy 201.181279 47.5476) (xy 201.181278 47.547601) (xy 201.174099 47.548372) (xy 201.121669 47.554008) - (xy 201.121664 47.554009) (xy 200.98682 47.604302) (xy 200.871608 47.69055) (xy 200.8716 47.690558) - (xy 200.785352 47.80577) (xy 200.73506 47.940611) (xy 200.735058 47.940622) (xy 200.731017 47.978204) - (xy 200.729773 47.989787) (xy 200.728367 48.002862) (xy 200.727064 48.002722) (xy 200.72405 48.010535) - (xy 200.72405 48.023593) (xy 200.713303 48.038383) (xy 200.706723 48.055438) (xy 200.695761 48.062529) - (xy 200.688086 48.073093) (xy 200.670697 48.078742) (xy 200.65535 48.088671) (xy 200.629895 48.092) - (xy 200.496994 48.092) (xy 200.438803 48.073093) (xy 200.426991 48.063004) (xy 200.375968 48.011982) - (xy 200.375966 48.01198) (xy 200.239034 47.932923) (xy 200.086307 47.892) (xy 199.928193 47.892) - (xy 199.901024 47.89928) (xy 199.857764 47.910871) (xy 199.796663 47.907668) (xy 199.749113 47.869163) - (xy 199.739384 47.84984) (xy 199.722947 47.80577) (xy 199.636699 47.690558) (xy 199.636698 47.690557) - (xy 199.636696 47.690554) (xy 199.636691 47.69055) (xy 199.519321 47.602686) (xy 199.484068 47.552677) - (xy 199.47965 47.523433) (xy 199.47965 45.411225) (xy 199.498557 45.353034) (xy 199.548057 45.31707) - (xy 199.56123 45.314169) (xy 199.565467 45.313097) (xy 199.565471 45.313097) (xy 199.675241 45.269808) - (xy 199.704648 45.258212) (xy 199.704648 45.258211) (xy 199.70465 45.258211) (xy 199.823861 45.167811) - (xy 199.914261 45.0486) (xy 199.914656 45.0476) (xy 199.938511 44.987107) (xy 199.969147 44.909421) - (xy 199.97965 44.82196) (xy 199.97965 44.573101) (xy 200.32915 44.573101) (xy 200.32915 44.828916) - (xy 200.339556 44.93077) (xy 200.394245 45.095812) (xy 200.485518 45.243788) (xy 200.608461 45.366731) - (xy 200.756437 45.458004) (xy 200.921479 45.512693) (xy 201.023334 45.5231) (xy 201.066649 45.5231) - (xy 201.06665 45.523099) (xy 201.06665 44.573101) (xy 201.066649 44.5731) (xy 200.329151 44.5731) - (xy 200.32915 44.573101) (xy 199.97965 44.573101) (xy 199.97965 43.82424) (xy 199.978815 43.817283) - (xy 200.32915 43.817283) (xy 200.32915 44.073099) (xy 200.329151 44.0731) (xy 201.066649 44.0731) - (xy 201.06665 44.073099) (xy 201.06665 43.123101) (xy 201.56665 43.123101) (xy 201.56665 45.523099) - (xy 201.566651 45.5231) (xy 201.609966 45.5231) (xy 201.71182 45.512693) (xy 201.876862 45.458004) - (xy 202.024838 45.366731) (xy 202.147781 45.243788) (xy 202.239054 45.095812) (xy 202.266673 45.012463) - (xy 202.302924 44.963173) (xy 202.361224 44.944605) (xy 202.419303 44.96385) (xy 202.452745 45.007283) - (xy 202.469038 45.048599) (xy 202.476336 45.058223) (xy 202.559439 45.167811) (xy 202.620483 45.214102) - (xy 202.639469 45.228499) (xy 202.674411 45.278725) (xy 202.67865 45.307383) (xy 202.67865 47.523433) - (xy 202.659743 47.581624) (xy 202.638979 47.602686) (xy 202.521608 47.69055) (xy 202.5216 47.690558) - (xy 202.435352 47.80577) (xy 202.38506 47.940611) (xy 202.385058 47.940622) (xy 202.380683 47.981309) - (xy 202.379773 47.989787) (xy 202.37865 48.000229) (xy 202.37865 48.645966) (xy 202.378651 48.64597) - (xy 202.385058 48.70558) (xy 202.385059 48.705585) (xy 202.435352 48.840429) (xy 202.504405 48.932671) - (xy 202.521604 48.955646) (xy 202.521607 48.955648) (xy 202.521608 48.955649) (xy 202.63682 49.041897) - (xy 202.771661 49.092189) (xy 202.771662 49.092189) (xy 202.771667 49.092191) (xy 202.831277 49.0986) - (xy 203.327022 49.098599) (xy 203.386633 49.092191) (xy 203.482843 49.056307) (xy 203.521479 49.041897) - (xy 203.521479 49.041896) (xy 203.521481 49.041896) (xy 203.636696 48.955646) (xy 203.722946 48.840431) - (xy 203.724309 48.836778) (xy 203.760242 48.740435) (xy 203.773241 48.705583) (xy 203.77965 48.645973) - (xy 203.779649 48.000228) (xy 203.773241 47.940617) (xy 203.769041 47.929355) (xy 203.722947 47.80577) - (xy 203.636699 47.690558) (xy 203.636698 47.690557) (xy 203.636696 47.690554) (xy 203.636691 47.69055) - (xy 203.519321 47.602686) (xy 203.484068 47.552677) (xy 203.47965 47.523433) (xy 203.47965 45.411225) - (xy 203.498557 45.353034) (xy 203.548057 45.31707) (xy 203.56123 45.314169) (xy 203.565467 45.313097) - (xy 203.565471 45.313097) (xy 203.675241 45.269808) (xy 203.704648 45.258212) (xy 203.704648 45.258211) - (xy 203.70465 45.258211) (xy 203.823861 45.167811) (xy 203.914261 45.0486) (xy 203.914656 45.0476) - (xy 203.938511 44.987107) (xy 203.969147 44.909421) (xy 203.97965 44.82196) (xy 203.97965 44.573101) - (xy 204.32915 44.573101) (xy 204.32915 44.828916) (xy 204.339556 44.93077) (xy 204.394245 45.095812) - (xy 204.485518 45.243788) (xy 204.608461 45.366731) (xy 204.756437 45.458004) (xy 204.921479 45.512693) - (xy 205.023334 45.5231) (xy 205.066649 45.5231) (xy 205.06665 45.523099) (xy 205.06665 44.573101) - (xy 205.066649 44.5731) (xy 204.329151 44.5731) (xy 204.32915 44.573101) (xy 203.97965 44.573101) - (xy 203.97965 43.82424) (xy 203.978815 43.817283) (xy 204.32915 43.817283) (xy 204.32915 44.073099) - (xy 204.329151 44.0731) (xy 205.066649 44.0731) (xy 205.06665 44.073099) (xy 205.06665 43.123101) - (xy 205.56665 43.123101) (xy 205.56665 45.523099) (xy 205.566651 45.5231) (xy 205.609966 45.5231) - (xy 205.71182 45.512693) (xy 205.876862 45.458004) (xy 206.024838 45.366731) (xy 206.147781 45.243788) - (xy 206.239054 45.095812) (xy 206.266673 45.012463) (xy 206.302924 44.963173) (xy 206.361224 44.944605) - (xy 206.419303 44.96385) (xy 206.452745 45.007283) (xy 206.469038 45.048599) (xy 206.476336 45.058223) - (xy 206.559439 45.167811) (xy 206.620483 45.214102) (xy 206.639469 45.228499) (xy 206.674411 45.278725) - (xy 206.67865 45.307383) (xy 206.67865 47.523433) (xy 206.659743 47.581624) (xy 206.638979 47.602686) - (xy 206.521608 47.69055) (xy 206.5216 47.690558) (xy 206.435352 47.80577) (xy 206.38506 47.940611) - (xy 206.385058 47.940622) (xy 206.380683 47.981309) (xy 206.379773 47.989787) (xy 206.37865 48.000229) - (xy 206.37865 48.645966) (xy 206.378651 48.64597) (xy 206.385058 48.70558) (xy 206.385059 48.705585) - (xy 206.435352 48.840429) (xy 206.504405 48.932671) (xy 206.521604 48.955646) (xy 206.521607 48.955648) - (xy 206.521608 48.955649) (xy 206.63682 49.041897) (xy 206.771661 49.092189) (xy 206.771662 49.092189) - (xy 206.771667 49.092191) (xy 206.831277 49.0986) (xy 207.327022 49.098599) (xy 207.386633 49.092191) - (xy 207.482843 49.056307) (xy 207.521479 49.041897) (xy 207.521479 49.041896) (xy 207.521481 49.041896) - (xy 207.636696 48.955646) (xy 207.722946 48.840431) (xy 207.724309 48.836778) (xy 207.760242 48.740435) - (xy 207.773241 48.705583) (xy 207.77965 48.645973) (xy 207.779649 48.000228) (xy 207.773241 47.940617) - (xy 207.769041 47.929355) (xy 207.722947 47.80577) (xy 207.636699 47.690558) (xy 207.636698 47.690557) - (xy 207.636696 47.690554) (xy 207.636691 47.69055) (xy 207.519321 47.602686) (xy 207.484068 47.552677) - (xy 207.47965 47.523433) (xy 207.47965 45.411225) (xy 207.498557 45.353034) (xy 207.548057 45.31707) - (xy 207.56123 45.314169) (xy 207.565467 45.313097) (xy 207.565471 45.313097) (xy 207.675241 45.269808) - (xy 207.704648 45.258212) (xy 207.704648 45.258211) (xy 207.70465 45.258211) (xy 207.779026 45.20181) - (xy 209.34115 45.20181) (xy 209.34115 45.444389) (xy 209.372811 45.684881) (xy 209.372811 45.684886) + (xy 99.812185 45.168377) (xy 99.661927 45.318635) (xy 99.537025 45.490547) (xy 99.440554 45.679884) + (xy 99.385304 45.849929) (xy 99.34934 45.899429) (xy 99.291149 45.918336) (xy 99.232958 45.899429) + (xy 99.196994 45.849929) (xy 99.192149 45.819336) (xy 99.192149 45.566578) (xy 99.192148 45.566576) + (xy 99.177297 45.4728) (xy 99.177296 45.472798) (xy 99.177296 45.472796) (xy 99.1197 45.359758) + (xy 99.029992 45.27005) (xy 98.916954 45.212454) (xy 98.916955 45.212454) (xy 98.823171 45.1976) + (xy 97.560128 45.1976) (xy 97.560126 45.197601) (xy 97.46635 45.212452) (xy 97.466345 45.212454) + (xy 97.353309 45.270049) (xy 97.263599 45.359759) (xy 97.206004 45.472795) (xy 97.19115 45.566578) + (xy 97.19115 45.9736) (xy 97.172243 46.031791) (xy 97.122743 46.067755) (xy 97.09215 46.0726) (xy 95.011959 46.0726) + (xy 94.953768 46.053693) (xy 94.941961 46.043609) (xy 94.860963 45.962611) (xy 94.86096 45.962609) + (xy 94.860958 45.962607) (xy 94.758239 45.903302) (xy 94.75824 45.903302) (xy 94.721046 45.893336) + (xy 94.643659 45.8726) (xy 94.525041 45.8726) (xy 94.470188 45.887298) (xy 94.410459 45.903302) + (xy 94.307741 45.962607) (xy 94.223857 46.046491) (xy 94.164552 46.149209) (xy 94.148853 46.2078) + (xy 94.13385 46.263791) (xy 86.785315 46.263791) (xy 86.854874 46.143312) (xy 86.854878 46.143304) + (xy 86.893815 46.0493) (xy 86.947704 45.9192) (xy 87.010488 45.684889) (xy 87.04215 45.444388) (xy 87.04215 45.201812) + (xy 87.010488 44.961311) (xy 86.947704 44.727) (xy 86.883957 44.5731) (xy 86.854876 44.502891) (xy 86.854873 44.502886) + (xy 86.749342 44.320101) (xy 86.749341 44.3201) (xy 86.733586 44.292811) (xy 86.71847 44.273112) + (xy 153.39165 44.273112) (xy 153.39165 45.573099) (xy 153.391651 45.5731) (xy 154.441649 45.5731) + (xy 154.44165 45.573099) (xy 154.44165 43.573101) (xy 154.94165 43.573101) (xy 154.94165 45.573099) + (xy 154.941651 45.5731) (xy 155.991648 45.5731) (xy 155.991649 45.573099) (xy 155.991649 45.037464) + (xy 167.04115 45.037464) (xy 167.04115 45.608736) (xy 167.048375 45.658325) (xy 167.051784 45.681726) + (xy 167.078844 45.737078) (xy 167.106824 45.794311) (xy 167.195439 45.882926) (xy 167.308025 45.937966) + (xy 167.381014 45.9486) (xy 167.381017 45.9486) (xy 167.84525 45.9486) (xy 167.903441 45.967507) + (xy 167.939405 46.017007) (xy 167.94425 46.0476) (xy 167.94425 46.135509) (xy 167.963621 46.207802) + (xy 167.974952 46.25009) (xy 168.034257 46.352808) (xy 168.034259 46.35281) (xy 168.034261 46.352813) + (xy 168.118137 46.436689) (xy 168.118139 46.43669) (xy 168.118141 46.436692) (xy 168.22086 46.495997) + (xy 168.220861 46.495997) (xy 168.220864 46.495999) (xy 168.335441 46.5267) (xy 168.335443 46.5267) + (xy 168.454057 46.5267) (xy 168.454059 46.5267) (xy 168.568636 46.495999) (xy 168.568638 46.495997) + (xy 168.56864 46.495997) (xy 168.671358 46.436692) (xy 168.671358 46.436691) (xy 168.671363 46.436689) + (xy 168.755239 46.352813) (xy 168.772567 46.3228) (xy 168.814547 46.25009) (xy 168.814547 46.250088) + (xy 168.814549 46.250086) (xy 168.84525 46.135509) (xy 168.84525 46.0476) (xy 168.850095 46.032688) + (xy 168.850095 46.017007) (xy 168.859311 46.004321) (xy 168.864157 45.989409) (xy 168.876842 45.980192) + (xy 168.886059 45.967507) (xy 168.900971 45.962661) (xy 168.913657 45.953445) (xy 168.94425 45.9486) + (xy 168.992151 45.9486) (xy 169.011461 45.950501) (xy 169.127581 45.973599) (xy 169.127582 45.973599) + (xy 169.255718 45.973599) (xy 169.255719 45.973599) (xy 169.371838 45.950501) (xy 169.391149 45.9486) + (xy 169.452282 45.9486) (xy 169.452286 45.9486) (xy 169.525275 45.937966) (xy 169.637861 45.882926) + (xy 169.726476 45.794311) (xy 169.781516 45.681725) (xy 169.781647 45.680823) (xy 169.782039 45.680028) + (xy 169.783784 45.674383) (xy 169.784689 45.674662) (xy 169.80874 45.625966) (xy 169.80961 45.625085) + (xy 170.637001 44.797696) (xy 170.691517 44.769919) (xy 170.707004 44.7687) (xy 172.429504 44.7687) + (xy 172.433698 44.770062) (xy 172.437993 44.769065) (xy 172.46244 44.779401) (xy 172.487695 44.787607) + (xy 172.490287 44.791175) (xy 172.494348 44.792892) (xy 172.508049 44.815622) (xy 172.523659 44.837107) + (xy 172.523659 44.841518) (xy 172.525935 44.845294) (xy 172.523659 44.865314) (xy 172.523659 44.898293) + (xy 172.520688 44.906254) (xy 172.519631 44.908753) (xy 172.501077 44.946707) (xy 172.499758 44.955755) + (xy 172.494809 44.967461) (xy 172.490234 44.972737) (xy 172.485942 44.983907) (xy 172.465184 45.014974) + (xy 172.41615 45.133352) (xy 172.41615 45.133354) (xy 172.416149 45.133356) (xy 172.408144 45.1736) + (xy 172.39115 45.25903) (xy 172.39115 45.519871) (xy 172.411791 45.623637) (xy 172.41179 45.623637) + (xy 172.416146 45.645536) (xy 172.416148 45.645542) (xy 172.465184 45.763926) (xy 172.534854 45.868196) + (xy 172.536373 45.870469) (xy 173.858881 47.192977) (xy 173.962835 47.262436) (xy 173.962836 47.262437) + (xy 173.965416 47.264161) (xy 173.96542 47.264163) (xy 173.965423 47.264165) (xy 174.083806 47.313201) + (xy 174.209481 47.3382) (xy 174.337619 47.3382) (xy 175.144971 47.3382) (xy 175.203162 47.357107) + (xy 175.239126 47.406607) (xy 175.239126 47.467793) (xy 175.233911 47.480681) (xy 175.226078 47.496703) + (xy 175.226077 47.496705) (xy 175.226077 47.496707) (xy 175.219856 47.539408) (xy 175.21615 47.564843) + (xy 175.21615 48.02833) (xy 175.197243 48.086521) (xy 175.187154 48.098334) (xy 173.836253 49.449236) + (xy 173.821024 49.464465) (xy 173.766507 49.492242) (xy 173.706075 49.482671) (xy 173.681019 49.464467) + (xy 173.648763 49.432211) (xy 173.64876 49.432209) (xy 173.648758 49.432207) (xy 173.546039 49.372902) + (xy 173.54604 49.372902) (xy 173.532501 49.369274) (xy 173.431459 49.3422) (xy 173.312841 49.3422) + (xy 173.242717 49.360989) (xy 173.198259 49.372902) (xy 173.095541 49.432207) (xy 173.09554 49.432208) + (xy 173.095537 49.43221) (xy 173.095537 49.432211) (xy 173.014542 49.513205) (xy 173.007427 49.51683) + (xy 173.002732 49.523293) (xy 172.980683 49.530456) (xy 172.960028 49.540981) (xy 172.944541 49.5422) + (xy 172.783409 49.5422) (xy 172.783401 49.542199) (xy 172.771878 49.542199) (xy 172.672223 49.542199) + (xy 172.672222 49.542199) (xy 172.632658 49.558586) (xy 172.632659 49.558587) (xy 172.580153 49.580335) + (xy 172.509685 49.650802) (xy 172.509686 49.650803) (xy 172.509685 49.650804) (xy 172.509684 49.650804) + (xy 171.816882 50.343604) (xy 171.762366 50.371381) (xy 171.746879 50.3726) (xy 170.821789 50.3726) + (xy 170.821786 50.372601) (xy 170.796659 50.375514) (xy 170.693885 50.420894) (xy 170.614444 50.500335) + (xy 170.569064 50.603111) (xy 170.56615 50.62823) (xy 170.56615 51.01796) (xy 170.566151 51.017963) + (xy 170.569064 51.04309) (xy 170.576198 51.059246) (xy 170.614444 51.145865) (xy 170.693885 51.225306) + (xy 170.796659 51.270685) (xy 170.821785 51.2736) (xy 172.322182 51.273599) (xy 172.380373 51.292506) + (xy 172.416337 51.342006) (xy 172.416337 51.403192) (xy 172.392186 51.442601) (xy 172.221183 51.613604) + (xy 172.166668 51.641381) (xy 172.151181 51.6426) (xy 170.821789 51.6426) (xy 170.821786 51.642601) + (xy 170.796659 51.645514) (xy 170.693885 51.690894) (xy 170.614444 51.770335) (xy 170.569064 51.873111) + (xy 170.56615 51.89823) (xy 170.56615 52.28796) (xy 170.566151 52.287963) (xy 170.569064 52.31309) + (xy 170.590884 52.362507) (xy 170.614444 52.415865) (xy 170.693885 52.495306) (xy 170.796659 52.540685) + (xy 170.821785 52.5436) (xy 172.561514 52.543599) (xy 172.586641 52.540685) (xy 172.689415 52.495306) + (xy 172.768856 52.415865) (xy 172.814235 52.313091) (xy 172.81715 52.287965) (xy 172.817149 51.898236) + (xy 172.814235 51.873109) (xy 172.797509 51.83523) (xy 172.791301 51.774362) (xy 172.818068 51.72524) + (xy 174.120045 50.423264) (xy 174.120047 50.423264) (xy 174.190514 50.352797) (xy 174.213289 50.297813) + (xy 174.228651 50.260728) (xy 174.228651 50.161072) (xy 174.22865 50.161069) (xy 174.22865 49.806369) + (xy 174.247557 49.748178) (xy 174.257646 49.736365) (xy 175.616415 48.377596) (xy 175.670932 48.349819) + (xy 175.686419 48.3486) (xy 176.149907 48.3486) (xy 176.14991 48.3486) (xy 176.218043 48.338673) + (xy 176.323133 48.287298) (xy 176.405848 48.204583) (xy 176.457223 48.099493) (xy 176.46715 48.03136) + (xy 176.46715 47.809354) (xy 176.486057 47.751163) (xy 176.535557 47.715199) (xy 176.596743 47.715199) + (xy 176.636154 47.73935) (xy 178.112154 49.21535) (xy 178.139931 49.269867) (xy 178.14115 49.285354) + (xy 178.14115 51.72962) (xy 178.141151 51.729623) (xy 178.156002 51.823399) (xy 178.156004 51.823404) + (xy 178.2136 51.936442) (xy 178.303308 52.02615) (xy 178.416346 52.083746) (xy 178.510131 52.0986) + (xy 179.073168 52.098599) (xy 179.07317 52.098599) (xy 179.073171 52.098598) (xy 179.120061 52.091172) + (xy 179.166949 52.083747) (xy 179.166949 52.083746) (xy 179.166954 52.083746) (xy 179.279992 52.02615) + (xy 179.3697 51.936442) (xy 179.427296 51.823404) (xy 179.439225 51.748086) (xy 179.44215 51.729621) + (xy 179.44215 50.5847) (xy 179.461057 50.526509) (xy 179.510557 50.490545) (xy 179.54115 50.4857) + (xy 179.603722 50.4857) (xy 179.661913 50.504607) (xy 179.697877 50.554107) (xy 179.702209 50.594762) + (xy 179.69165 50.698112) (xy 179.69165 50.973099) (xy 179.691651 50.9731) (xy 180.441649 50.9731) + (xy 180.44165 50.973099) (xy 180.44165 50.031431) (xy 180.326885 49.998101) (xy 180.94165 49.998101) + (xy 180.94165 50.973099) (xy 180.941651 50.9731) (xy 181.691648 50.9731) (xy 181.691649 50.973099) + (xy 181.691649 50.698113) (xy 181.681157 50.595412) (xy 181.681154 50.5954) (xy 181.626006 50.428975) + (xy 181.533969 50.279759) (xy 181.40999 50.15578) (xy 181.260774 50.063743) (xy 181.094343 50.008593) + (xy 180.991637 49.9981) (xy 180.941651 49.9981) (xy 180.94165 49.998101) (xy 180.326885 49.998101) + (xy 180.325239 49.997623) (xy 180.31509 49.990727) (xy 180.3031 49.988142) (xy 180.290393 49.973946) + (xy 180.27463 49.963236) (xy 180.270472 49.951692) (xy 180.262292 49.942553) (xy 180.25537 49.909756) + (xy 180.253899 49.90567) (xy 180.254251 49.904455) (xy 180.25385 49.902551) (xy 180.25385 49.771132) + (xy 180.25385 49.771131) (xy 180.228851 49.645456) (xy 180.179815 49.527073) (xy 180.179813 49.52707) + (xy 180.179811 49.527066) (xy 180.144185 49.473749) (xy 180.108626 49.420531) (xy 180.018019 49.329924) + (xy 179.975576 49.301565) (xy 179.911483 49.258738) (xy 179.911475 49.258734) (xy 179.793097 49.2097) + (xy 179.793095 49.209699) (xy 179.793094 49.209699) (xy 179.667419 49.1847) (xy 179.54115 49.1847) + (xy 179.482959 49.165793) (xy 179.446995 49.116293) (xy 179.44215 49.0857) (xy 179.44215 48.910832) + (xy 179.44215 48.910831) (xy 179.417151 48.785156) (xy 179.368115 48.666773) (xy 179.368114 48.66677) + (xy 179.353024 48.644186) (xy 179.353024 48.644187) (xy 179.296926 48.56023) (xy 177.634903 46.898207) + (xy 177.607126 46.84369) (xy 177.616697 46.783258) (xy 177.659962 46.739993) (xy 177.679275 46.732579) + (xy 177.719136 46.721899) (xy 177.821863 46.662589) (xy 177.905739 46.578713) (xy 177.941893 46.516093) + (xy 177.965047 46.47599) (xy 177.965047 46.475988) (xy 177.965049 46.475986) (xy 177.993052 46.371474) + (xy 178.026376 46.320161) (xy 178.083498 46.298235) (xy 178.088679 46.298099) (xy 178.173216 46.298099) + (xy 178.173232 46.298098) (xy 178.243753 46.291691) (xy 178.243759 46.291689) (xy 178.406042 46.24112) + (xy 178.40605 46.241117) (xy 178.551522 46.153175) (xy 178.671725 46.032972) (xy 178.759667 45.8875) + (xy 178.75967 45.887492) (xy 178.810239 45.72521) (xy 178.810241 45.725204) (xy 178.816649 45.654681) + (xy 178.816649 45.589154) (xy 178.835555 45.530963) (xy 178.885055 45.494999) (xy 178.94624 45.494998) + (xy 178.985653 45.519149) (xy 182.212154 48.74565) (xy 182.239931 48.800167) (xy 182.24115 48.815654) + (xy 182.24115 49.403746) (xy 182.222243 49.461937) (xy 182.212154 49.473749) (xy 182.12197 49.563933) + (xy 182.067502 49.645454) (xy 182.067501 49.645456) (xy 182.050784 49.670473) (xy 182.00175 49.788852) + (xy 182.001749 49.788855) (xy 182.001749 49.788856) (xy 181.994529 49.825151) (xy 181.97675 49.91453) + (xy 181.97675 51.059246) (xy 181.957843 51.117437) (xy 181.947754 51.12925) (xy 181.6329 51.444104) + (xy 181.578383 51.471881) (xy 181.562896 51.4731) (xy 179.691652 51.4731) (xy 179.691651 51.473101) + (xy 179.691651 51.748086) (xy 179.702142 51.850787) (xy 179.702145 51.850799) (xy 179.757293 52.017224) + (xy 179.84933 52.16644) (xy 179.973309 52.290419) (xy 180.122525 52.382456) (xy 180.288956 52.437606) + (xy 180.391665 52.4481) (xy 180.394179 52.448228) (xy 180.394172 52.448356) (xy 180.394179 52.448357) + (xy 180.394165 52.448484) (xy 180.394113 52.449506) (xy 180.447978 52.466928) (xy 180.484008 52.51638) + (xy 180.484091 52.577565) (xy 180.459899 52.617103) (xy 178.3269 54.750104) (xy 178.272383 54.777881) + (xy 178.256896 54.7791) (xy 176.891118 54.7791) (xy 176.832927 54.760193) (xy 176.796963 54.710693) + (xy 176.796963 54.649507) (xy 176.797143 54.648959) (xy 176.806506 54.620701) (xy 176.81665 54.521423) + (xy 176.81665 54.498101) (xy 176.816649 54.4981) (xy 174.866652 54.4981) (xy 174.866651 54.498101) + (xy 174.866651 54.521422) (xy 174.876792 54.620697) (xy 174.876794 54.620705) (xy 174.886157 54.648959) + (xy 174.886513 54.710143) (xy 174.850839 54.759852) (xy 174.792759 54.779098) (xy 174.792182 54.7791) + (xy 172.91615 54.7791) (xy 172.857959 54.760193) (xy 172.821995 54.710693) (xy 172.81715 54.6801) + (xy 172.817149 54.43824) (xy 172.817149 54.438239) (xy 172.817149 54.438236) (xy 172.814235 54.413109) + (xy 172.768856 54.310335) (xy 172.689415 54.230894) (xy 172.586641 54.185515) (xy 172.58664 54.185514) + (xy 172.586638 54.185514) (xy 172.561519 54.1826) (xy 172.561515 54.1826) (xy 172.202103 54.1826) + (xy 172.143912 54.163693) (xy 172.1432 54.16317) (xy 172.13729 54.158795) (xy 172.106319 54.127824) + (xy 171.999777 54.056635) (xy 171.881394 54.007599) (xy 171.878397 54.007002) (xy 171.871016 54.003911) + (xy 171.851478 53.987089) (xy 171.833812 53.974776) (xy 174.86665 53.974776) (xy 174.86665 53.998099) + (xy 174.866651 53.9981) (xy 176.816648 53.9981) (xy 176.816649 53.998099) (xy 176.816649 53.974777) + (xy 176.806507 53.875502) (xy 176.806504 53.87549) (xy 176.753195 53.714612) (xy 176.664224 53.57037) + (xy 176.544379 53.450525) (xy 176.400137 53.361554) (xy 176.390325 53.358303) (xy 176.341035 53.322051) + (xy 176.322467 53.263751) (xy 176.341713 53.205672) (xy 176.351455 53.194331) (xy 176.401476 53.144311) + (xy 176.456516 53.031725) (xy 176.46715 52.958736) (xy 176.46715 52.437464) (xy 176.456516 52.364475) + (xy 176.401476 52.251889) (xy 176.312861 52.163274) (xy 176.200275 52.108234) (xy 176.200271 52.108233) + (xy 176.176875 52.104824) (xy 176.122019 52.077724) (xy 176.093568 52.023556) (xy 176.09215 52.006859) + (xy 176.09215 50.092636) (xy 176.111057 50.034445) (xy 176.160557 49.998481) (xy 176.176866 49.994672) + (xy 176.218043 49.988673) (xy 176.323133 49.937298) (xy 176.405848 49.854583) (xy 176.457223 49.749493) + (xy 176.46715 49.68136) (xy 176.46715 49.21484) (xy 176.457223 49.146707) (xy 176.405848 49.041617) + (xy 176.323133 48.958902) (xy 176.323131 48.958901) (xy 176.218045 48.907527) (xy 176.190789 48.903556) + (xy 176.14991 48.8976) (xy 175.53339 48.8976) (xy 175.499323 48.902563) (xy 175.465254 48.907527) + (xy 175.360168 48.958901) (xy 175.277451 49.041618) (xy 175.226077 49.146704) (xy 175.226077 49.146707) + (xy 175.21615 49.21484) (xy 175.21615 49.68136) (xy 175.222768 49.726782) (xy 175.226077 49.749495) + (xy 175.277451 49.854581) (xy 175.277452 49.854583) (xy 175.360167 49.937298) (xy 175.389611 49.951692) + (xy 175.465254 49.988672) (xy 175.465255 49.988672) (xy 175.465257 49.988673) (xy 175.506425 49.994671) + (xy 175.56128 50.021769) (xy 175.589731 50.075937) (xy 175.59115 50.092636) (xy 175.59115 52.006859) + (xy 175.572243 52.06505) (xy 175.522743 52.101014) (xy 175.506425 52.104824) (xy 175.483028 52.108233) + (xy 175.483024 52.108234) (xy 175.37044 52.163273) (xy 175.281823 52.25189) (xy 175.226784 52.364473) + (xy 175.226784 52.364475) (xy 175.21615 52.437464) (xy 175.21615 52.958736) (xy 175.223153 53.0068) + (xy 175.226784 53.031726) (xy 175.271699 53.1236) (xy 175.281824 53.144311) (xy 175.331839 53.194326) + (xy 175.359615 53.248841) (xy 175.350044 53.309273) (xy 175.306779 53.352538) (xy 175.292976 53.358302) + (xy 175.283164 53.361553) (xy 175.283163 53.361553) (xy 175.13892 53.450525) (xy 175.019075 53.57037) + (xy 174.930104 53.714612) (xy 174.876793 53.875496) (xy 174.86665 53.974776) (xy 171.833812 53.974776) + (xy 171.830329 53.972348) (xy 171.828614 53.967404) (xy 171.824649 53.96399) (xy 171.81873 53.938896) + (xy 171.810285 53.914539) (xy 171.811804 53.909531) (xy 171.810603 53.904438) (xy 171.820562 53.880662) + (xy 171.828048 53.855989) (xy 171.832221 53.85283) (xy 171.834243 53.848004) (xy 171.856276 53.834622) + (xy 171.876834 53.819062) (xy 171.88384 53.817881) (xy 171.886539 53.816243) (xy 171.891254 53.816633) + (xy 171.909263 53.813599) (xy 172.561514 53.813599) (xy 172.586641 53.810685) (xy 172.689415 53.765306) + (xy 172.768856 53.685865) (xy 172.782126 53.65581) (xy 172.79933 53.636584) (xy 172.814499 53.615707) + (xy 172.819452 53.614097) (xy 172.822926 53.610216) (xy 172.87269 53.5968) (xy 172.979041 53.5968) + (xy 173.037232 53.615707) (xy 173.049038 53.62579) (xy 173.130037 53.706789) (xy 173.130039 53.70679) + (xy 173.130041 53.706792) (xy 173.23276 53.766097) (xy 173.232761 53.766097) (xy 173.232764 53.766099) + (xy 173.347341 53.7968) (xy 173.347343 53.7968) (xy 173.465957 53.7968) (xy 173.465959 53.7968) + (xy 173.580536 53.766099) (xy 173.580538 53.766097) (xy 173.58054 53.766097) (xy 173.683258 53.706792) + (xy 173.683258 53.706791) (xy 173.683263 53.706789) (xy 173.767139 53.622913) (xy 173.767142 53.622908) + (xy 173.826447 53.52019) (xy 173.826447 53.520188) (xy 173.826449 53.520186) (xy 173.85715 53.405609) + (xy 173.85715 53.286991) (xy 173.826449 53.172414) (xy 173.826447 53.172411) (xy 173.826447 53.172409) + (xy 173.767142 53.069691) (xy 173.76714 53.069689) (xy 173.767139 53.069687) (xy 173.683263 52.985811) + (xy 173.68326 52.985809) (xy 173.683258 52.985807) (xy 173.580539 52.926502) (xy 173.58054 52.926502) + (xy 173.567001 52.922874) (xy 173.465959 52.8958) (xy 173.347341 52.8958) (xy 173.277217 52.914589) + (xy 173.232759 52.926502) (xy 173.130041 52.985807) (xy 173.13004 52.985808) (xy 173.130037 52.98581) + (xy 173.130037 52.985811) (xy 173.049042 53.066805) (xy 173.041927 53.07043) (xy 173.037232 53.076893) + (xy 173.015183 53.084056) (xy 172.994528 53.094581) (xy 172.979041 53.0958) (xy 172.857854 53.0958) + (xy 172.799663 53.076893) (xy 172.775471 53.046922) (xy 172.77404 53.047903) (xy 172.768857 53.040337) + (xy 172.768856 53.040336) (xy 172.768856 53.040335) (xy 172.689415 52.960894) (xy 172.586641 52.915515) + (xy 172.58664 52.915514) (xy 172.586638 52.915514) (xy 172.561518 52.9126) (xy 170.821789 52.9126) + (xy 170.821786 52.912601) (xy 170.796659 52.915514) (xy 170.693885 52.960894) (xy 170.614444 53.040335) + (xy 170.569064 53.143111) (xy 170.56615 53.16823) (xy 170.56615 53.55796) (xy 170.566151 53.557963) + (xy 170.569064 53.58309) (xy 170.576625 53.600213) (xy 170.614444 53.685865) (xy 170.693885 53.765306) + (xy 170.796659 53.810685) (xy 170.821785 53.8136) (xy 171.474033 53.813599) (xy 171.532223 53.832506) + (xy 171.568187 53.882006) (xy 171.568187 53.943192) (xy 171.532223 53.992692) (xy 171.506328 54.005568) + (xy 171.506399 54.005738) (xy 171.503941 54.006756) (xy 171.502783 54.007332) (xy 171.501914 54.007595) + (xy 171.383524 54.056634) (xy 171.383516 54.056638) (xy 171.300509 54.112102) (xy 171.276981 54.127824) + (xy 171.276979 54.127825) (xy 171.272938 54.130526) (xy 171.271849 54.128896) (xy 171.222182 54.148329) + (xy 171.216365 54.1485) (xy 170.81248 54.1485) (xy 170.749643 54.160999) (xy 170.686806 54.173499) + (xy 170.686805 54.173499) (xy 170.686802 54.1735) (xy 170.578331 54.218431) (xy 170.57833 54.218431) + (xy 170.568425 54.222533) (xy 170.461884 54.29372) (xy 169.80767 54.947934) (xy 169.736483 55.054475) + (xy 169.687449 55.172854) (xy 169.687449 55.172856) (xy 169.662451 55.298528) (xy 169.662451 55.426671) + (xy 169.67276 55.478496) (xy 169.686179 55.545961) (xy 169.687449 55.552343) (xy 169.687449 55.552345) + (xy 169.736483 55.670724) (xy 169.807188 55.776544) (xy 169.807673 55.777269) (xy 169.898281 55.867877) + (xy 170.004823 55.939065) (xy 170.123206 55.988101) (xy 170.248881 56.013099) (xy 170.248882 56.013099) + (xy 170.377018 56.013099) (xy 170.377019 56.013099) (xy 170.502694 55.988101) (xy 170.621077 55.939065) + (xy 170.727619 55.867877) (xy 170.999305 55.596191) (xy 171.117001 55.478496) (xy 171.124117 55.47487) + (xy 171.128813 55.468407) (xy 171.150862 55.461242) (xy 171.171517 55.450719) (xy 171.187004 55.4495) + (xy 171.381196 55.4495) (xy 171.439387 55.468407) (xy 171.451199 55.478496) (xy 171.68701 55.714306) + (xy 171.907581 55.934877) (xy 171.987238 55.988101) (xy 172.003338 55.998859) (xy 172.014119 56.006063) + (xy 172.014121 56.006064) (xy 172.014123 56.006065) (xy 172.132506 56.055101) (xy 172.258181 56.0801) + (xy 172.258182 56.0801) (xy 178.631418 56.0801) (xy 178.631419 56.0801) (xy 178.757094 56.055101) + (xy 178.875477 56.006065) (xy 178.902362 55.988101) (xy 178.982019 55.934877) (xy 183.104061 51.812834) + (xy 183.158574 51.78506) (xy 183.219006 51.794631) (xy 183.259796 51.833339) (xy 183.284261 51.875713) + (xy 183.368137 51.959589) (xy 183.368139 51.95959) (xy 183.368141 51.959592) (xy 183.47086 52.018897) + (xy 183.470861 52.018897) (xy 183.470864 52.018899) (xy 183.585441 52.0496) (xy 183.585443 52.0496) + (xy 183.704057 52.0496) (xy 183.704059 52.0496) (xy 183.818636 52.018899) (xy 183.818638 52.018897) + (xy 183.81864 52.018897) (xy 183.921358 51.959592) (xy 183.921358 51.959591) (xy 183.921363 51.959589) + (xy 184.002357 51.878594) (xy 184.056872 51.850819) (xy 184.072359 51.8496) (xy 202.202979 51.8496) + (xy 202.291732 51.812837) (xy 202.295047 51.811464) (xy 205.128914 48.977595) (xy 205.183431 48.949819) + (xy 205.198918 48.9486) (xy 205.662407 48.9486) (xy 205.66241 48.9486) (xy 205.730543 48.938673) + (xy 205.835633 48.887298) (xy 205.918348 48.804583) (xy 205.969723 48.699493) (xy 205.97965 48.63136) + (xy 205.97965 48.01484) (xy 206.52865 48.01484) (xy 206.52865 48.63136) (xy 206.530519 48.644186) + (xy 206.538577 48.699495) (xy 206.587515 48.799599) (xy 206.589952 48.804583) (xy 206.672667 48.887298) + (xy 206.720803 48.91083) (xy 206.777754 48.938672) (xy 206.777755 48.938672) (xy 206.777757 48.938673) + (xy 206.84589 48.9486) (xy 206.845893 48.9486) (xy 207.312407 48.9486) (xy 207.31241 48.9486) (xy 207.380543 48.938673) + (xy 207.485633 48.887298) (xy 207.568348 48.804583) (xy 207.619723 48.699493) (xy 207.62965 48.63136) + (xy 207.62965 48.01484) (xy 207.619723 47.946707) (xy 207.615028 47.937104) (xy 207.568348 47.841618) + (xy 207.568348 47.841617) (xy 207.485633 47.758902) (xy 207.385169 47.709788) (xy 207.341196 47.667246) + (xy 207.32965 47.620848) (xy 207.32965 45.2726) (xy 207.348557 45.214409) (xy 207.365898 45.20181) + (xy 209.34115 45.20181) (xy 209.34115 45.444389) (xy 209.344041 45.46635) (xy 209.372395 45.681725) + (xy 209.372811 45.684881) (xy 209.372811 45.684886) (xy 209.39399 45.763926) (xy 209.435364 45.918336) (xy 209.435594 45.919192) (xy 209.435598 45.919205) (xy 209.528422 46.143304) (xy 209.528424 46.143308) (xy 209.528426 46.143312) (xy 209.649714 46.353389) (xy 209.649716 46.353392) (xy 209.797379 46.545831) (xy 209.797381 46.545833) (xy 209.797385 46.545838) (xy 209.968912 46.717365) (xy 209.968916 46.717368) - (xy 209.968918 46.71737) (xy 210.141016 46.849425) (xy 210.161361 46.865036) (xy 210.371438 46.986324) + (xy 209.968918 46.71737) (xy 210.071746 46.796272) (xy 210.161361 46.865036) (xy 210.371438 46.986324) (xy 210.59555 47.079154) (xy 210.829861 47.141938) (xy 211.070362 47.1736) (xy 211.070363 47.1736) (xy 211.312937 47.1736) (xy 211.312938 47.1736) (xy 211.553439 47.141938) (xy 211.78775 47.079154) (xy 212.011862 46.986324) (xy 212.221939 46.865036) (xy 212.414388 46.717365) (xy 212.585915 46.545838) @@ -44576,87 +50515,287 @@ (xy 213.04215 45.444388) (xy 213.04215 45.201812) (xy 213.010488 44.961311) (xy 212.947704 44.727) (xy 212.854874 44.502888) (xy 212.733586 44.292811) (xy 212.718471 44.273113) (xy 212.58592 44.100368) (xy 212.585918 44.100366) (xy 212.585915 44.100362) (xy 212.414388 43.928835) (xy 212.414383 43.928831) - (xy 212.414381 43.928829) (xy 212.221942 43.781166) (xy 212.221939 43.781164) (xy 212.011862 43.659876) + (xy 212.414381 43.928829) (xy 212.221942 43.781166) (xy 212.156706 43.743502) (xy 212.011862 43.659876) (xy 212.011858 43.659874) (xy 212.011854 43.659872) (xy 211.787755 43.567048) (xy 211.787754 43.567047) (xy 211.78775 43.567046) (xy 211.553439 43.504262) (xy 211.553436 43.504261) (xy 211.553434 43.504261) (xy 211.312939 43.4726) (xy 211.312938 43.4726) (xy 211.070362 43.4726) (xy 211.07036 43.4726) (xy 210.829868 43.504261) (xy 210.829863 43.504261) (xy 210.595557 43.567044) (xy 210.595544 43.567048) (xy 210.371445 43.659872) (xy 210.161357 43.781166) (xy 209.968918 43.928829) (xy 209.797379 44.100368) (xy 209.649716 44.292807) (xy 209.528422 44.502895) (xy 209.435598 44.726994) (xy 209.435594 44.727007) (xy 209.372811 44.961313) - (xy 209.372811 44.961318) (xy 209.34115 45.20181) (xy 207.779026 45.20181) (xy 207.823861 45.167811) - (xy 207.914261 45.0486) (xy 207.914656 45.0476) (xy 207.938511 44.987107) (xy 207.969147 44.909421) - (xy 207.97965 44.82196) (xy 207.97965 43.82424) (xy 207.969147 43.736779) (xy 207.93882 43.659876) - (xy 207.914262 43.597601) (xy 207.823863 43.478392) (xy 207.823861 43.478389) (xy 207.70465 43.387989) - (xy 207.704648 43.387988) (xy 207.704648 43.387987) (xy 207.565472 43.333103) (xy 207.478014 43.3226) - (xy 207.47801 43.3226) (xy 206.90529 43.3226) (xy 206.905285 43.3226) (xy 206.817827 43.333103) - (xy 206.678651 43.387987) (xy 206.678651 43.387988) (xy 206.559442 43.478386) (xy 206.559436 43.478392) - (xy 206.469038 43.5976) (xy 206.452745 43.638916) (xy 206.413807 43.686113) (xy 206.354565 43.701409) - (xy 206.297646 43.678962) (xy 206.266673 43.633736) (xy 206.239054 43.550387) (xy 206.147781 43.402411) - (xy 206.024838 43.279468) (xy 205.876862 43.188195) (xy 205.71182 43.133506) (xy 205.609966 43.1231) - (xy 205.566651 43.1231) (xy 205.56665 43.123101) (xy 205.06665 43.123101) (xy 205.066649 43.1231) - (xy 205.023334 43.1231) (xy 204.921479 43.133506) (xy 204.756437 43.188195) (xy 204.608461 43.279468) - (xy 204.485518 43.402411) (xy 204.394245 43.550387) (xy 204.339556 43.715429) (xy 204.32915 43.817283) - (xy 203.978815 43.817283) (xy 203.969147 43.736779) (xy 203.93882 43.659876) (xy 203.914262 43.597601) - (xy 203.823863 43.478392) (xy 203.823861 43.478389) (xy 203.70465 43.387989) (xy 203.704648 43.387988) - (xy 203.704648 43.387987) (xy 203.565472 43.333103) (xy 203.478014 43.3226) (xy 203.47801 43.3226) - (xy 202.90529 43.3226) (xy 202.905285 43.3226) (xy 202.817827 43.333103) (xy 202.678651 43.387987) - (xy 202.678651 43.387988) (xy 202.559442 43.478386) (xy 202.559436 43.478392) (xy 202.469038 43.5976) - (xy 202.452745 43.638916) (xy 202.413807 43.686113) (xy 202.354565 43.701409) (xy 202.297646 43.678962) - (xy 202.266673 43.633736) (xy 202.239054 43.550387) (xy 202.147781 43.402411) (xy 202.024838 43.279468) - (xy 201.876862 43.188195) (xy 201.71182 43.133506) (xy 201.609966 43.1231) (xy 201.566651 43.1231) - (xy 201.56665 43.123101) (xy 201.06665 43.123101) (xy 201.066649 43.1231) (xy 201.023334 43.1231) - (xy 200.921479 43.133506) (xy 200.756437 43.188195) (xy 200.608461 43.279468) (xy 200.485518 43.402411) - (xy 200.394245 43.550387) (xy 200.339556 43.715429) (xy 200.32915 43.817283) (xy 199.978815 43.817283) - (xy 199.969147 43.736779) (xy 199.93882 43.659876) (xy 199.914262 43.597601) (xy 199.823863 43.478392) - (xy 199.823861 43.478389) (xy 199.70465 43.387989) (xy 199.704648 43.387988) (xy 199.704648 43.387987) - (xy 199.565472 43.333103) (xy 199.478014 43.3226) (xy 199.47801 43.3226) (xy 198.90529 43.3226) - (xy 198.905285 43.3226) (xy 198.817827 43.333103) (xy 198.678651 43.387987) (xy 198.678651 43.387988) - (xy 198.559442 43.478386) (xy 198.559436 43.478392) (xy 198.469038 43.5976) (xy 198.452745 43.638916) - (xy 198.413807 43.686113) (xy 198.354565 43.701409) (xy 198.297646 43.678962) (xy 198.266673 43.633736) - (xy 198.239054 43.550387) (xy 198.147781 43.402411) (xy 198.024838 43.279468) (xy 197.876862 43.188195) - (xy 197.71182 43.133506) (xy 197.609966 43.1231) (xy 197.566651 43.1231) (xy 197.56665 43.123101) - (xy 197.06665 43.123101) (xy 197.066649 43.1231) (xy 197.023334 43.1231) (xy 196.921479 43.133506) - (xy 196.756437 43.188195) (xy 196.608461 43.279468) (xy 196.485518 43.402411) (xy 196.394245 43.550387) - (xy 196.339556 43.715429) (xy 196.32915 43.817283) (xy 195.978815 43.817283) (xy 195.969147 43.736779) - (xy 195.93882 43.659876) (xy 195.914262 43.597601) (xy 195.823863 43.478392) (xy 195.823861 43.478389) - (xy 195.70465 43.387989) (xy 195.704648 43.387988) (xy 195.704648 43.387987) (xy 195.565472 43.333103) - (xy 195.478014 43.3226) (xy 195.47801 43.3226) (xy 194.90529 43.3226) (xy 194.905285 43.3226) (xy 194.817827 43.333103) - (xy 194.678651 43.387987) (xy 194.678651 43.387988) (xy 194.559442 43.478386) (xy 194.559436 43.478392) - (xy 194.469038 43.5976) (xy 194.452745 43.638916) (xy 194.413807 43.686113) (xy 194.354565 43.701409) - (xy 194.297646 43.678962) (xy 194.266673 43.633736) (xy 194.239054 43.550387) (xy 194.147781 43.402411) - (xy 194.024838 43.279468) (xy 193.876862 43.188195) (xy 193.71182 43.133506) (xy 193.609966 43.1231) - (xy 193.566651 43.1231) (xy 193.56665 43.123101) (xy 193.06665 43.123101) (xy 193.066649 43.1231) - (xy 193.023334 43.1231) (xy 192.921479 43.133506) (xy 192.756437 43.188195) (xy 192.608461 43.279468) - (xy 192.485518 43.402411) (xy 192.394245 43.550387) (xy 192.339556 43.715429) (xy 192.32915 43.817283) - (xy 179.335811 43.817283) (xy 179.014942 43.496414) (xy 179.014939 43.496411) (xy 178.942655 43.448112) - (xy 178.883835 43.408809) (xy 178.883824 43.408803) (xy 178.738147 43.348463) (xy 178.583494 43.3177) - (xy 178.583492 43.3177) (xy 170.475392 43.3177) (xy 170.317708 43.3177) (xy 170.317705 43.3177) - (xy 170.163053 43.348463) (xy 170.163051 43.348463) (xy 170.017375 43.408803) (xy 170.017364 43.408809) - (xy 169.886259 43.496412) (xy 168.828973 44.553696) (xy 168.79529 44.575789) (xy 168.706677 44.610734) - (xy 168.591572 44.698022) (xy 168.504284 44.813127) (xy 168.502943 44.815514) (xy 168.501391 44.816943) - (xy 168.500195 44.818521) (xy 168.499911 44.818306) (xy 168.457941 44.856968) (xy 168.397167 44.864054) - (xy 168.343835 44.834065) (xy 168.330357 44.815514) (xy 168.329015 44.813127) (xy 168.329014 44.813126) - (xy 168.329014 44.813125) (xy 168.241728 44.698022) (xy 168.126625 44.610736) (xy 168.126624 44.610735) - (xy 168.126622 44.610734) (xy 167.992241 44.557741) (xy 167.907798 44.5476) (xy 167.907794 44.5476) - (xy 167.375506 44.5476) (xy 167.375501 44.5476) (xy 167.291058 44.557741) (xy 167.156677 44.610734) - (xy 167.041572 44.698022) (xy 166.954284 44.813127) (xy 166.901291 44.947508) (xy 166.89115 45.031951) - (xy 155.991649 45.031951) (xy 155.991649 44.273113) (xy 155.981157 44.170412) (xy 155.981154 44.1704) - (xy 155.948913 44.073101) (xy 159.841651 44.073101) (xy 159.841651 44.198086) (xy 159.852142 44.300787) - (xy 159.852145 44.300799) (xy 159.907293 44.467224) (xy 159.99933 44.61644) (xy 160.123309 44.740419) - (xy 160.272525 44.832456) (xy 160.438956 44.887606) (xy 160.541662 44.898099) (xy 161.441648 44.898099) - (xy 161.44165 44.898098) (xy 161.44165 44.073101) (xy 161.94165 44.073101) (xy 161.94165 44.898098) - (xy 161.941651 44.898099) (xy 162.841636 44.898099) (xy 162.944337 44.887607) (xy 162.944349 44.887604) - (xy 163.110774 44.832456) (xy 163.25999 44.740419) (xy 163.383969 44.61644) (xy 163.476006 44.467224) - (xy 163.531156 44.300793) (xy 163.54165 44.198087) (xy 163.54165 44.073101) (xy 163.541649 44.0731) - (xy 161.941651 44.0731) (xy 161.94165 44.073101) (xy 161.44165 44.073101) (xy 161.441649 44.0731) - (xy 159.841652 44.0731) (xy 159.841651 44.073101) (xy 155.948913 44.073101) (xy 155.945643 44.063233) - (xy 155.926006 44.003974) (xy 155.833969 43.854759) (xy 155.70999 43.73078) (xy 155.560774 43.638743) - (xy 155.394343 43.583593) (xy 155.291637 43.5731) (xy 154.941651 43.5731) (xy 154.94165 43.573101) - (xy 154.44165 43.573101) (xy 154.441649 43.5731) (xy 154.091663 43.5731) (xy 153.988962 43.583592) - (xy 153.98895 43.583595) (xy 153.822525 43.638743) (xy 153.673309 43.73078) (xy 153.54933 43.854759) - (xy 153.457293 44.003975) (xy 153.402143 44.170406) (xy 153.39165 44.273112) (xy 86.71847 44.273112) - (xy 86.58592 44.100368) (xy 86.585918 44.100366) (xy 86.585915 44.100362) (xy 86.414388 43.928835) - (xy 86.414383 43.928831) (xy 86.414381 43.928829) (xy 86.221942 43.781166) (xy 86.221939 43.781164) + (xy 209.372811 44.961318) (xy 209.34115 45.20181) (xy 207.365898 45.20181) (xy 207.398057 45.178445) + (xy 207.42865 45.1736) (xy 207.466429 45.1736) (xy 207.493281 45.169346) (xy 207.558748 45.158978) + (xy 207.558754 45.158975) (xy 207.654157 45.110365) (xy 207.654162 45.110362) (xy 207.660343 45.107212) + (xy 207.670023 45.10228) (xy 207.75833 45.013973) (xy 207.815028 44.902698) (xy 207.826714 44.828916) + (xy 207.82965 44.810378) (xy 207.82965 43.835821) (xy 207.820993 43.781164) (xy 207.815028 43.743502) + (xy 207.75833 43.632227) (xy 207.670023 43.54392) (xy 207.67002 43.543918) (xy 207.670021 43.543918) + (xy 207.558751 43.487223) (xy 207.558748 43.487222) (xy 207.535667 43.483566) (xy 207.466429 43.4726) + (xy 207.466426 43.4726) (xy 206.916874 43.4726) (xy 206.916871 43.4726) (xy 206.824552 43.487222) + (xy 206.824548 43.487223) (xy 206.713279 43.543918) (xy 206.624968 43.632229) (xy 206.568273 43.743498) + (xy 206.568272 43.743502) (xy 206.55365 43.835821) (xy 206.55365 44.810378) (xy 206.560225 44.851889) + (xy 206.567543 44.898098) (xy 206.568272 44.902697) (xy 206.568273 44.902701) (xy 206.624968 45.01397) + (xy 206.62497 45.013973) (xy 206.713277 45.10228) (xy 206.713279 45.102281) (xy 206.713281 45.102282) + (xy 206.774595 45.133524) (xy 206.81786 45.176788) (xy 206.82865 45.221733) (xy 206.82865 47.620848) + (xy 206.809743 47.679039) (xy 206.77313 47.709789) (xy 206.672668 47.758901) (xy 206.589951 47.841618) + (xy 206.538577 47.946704) (xy 206.538577 47.946707) (xy 206.52865 48.01484) (xy 205.97965 48.01484) + (xy 205.969723 47.946707) (xy 205.965028 47.937104) (xy 205.918348 47.841618) (xy 205.918348 47.841617) + (xy 205.835633 47.758902) (xy 205.805574 47.744207) (xy 205.730545 47.707527) (xy 205.699417 47.702992) + (xy 205.66241 47.6976) (xy 205.19589 47.6976) (xy 205.161823 47.702563) (xy 205.127754 47.707527) + (xy 205.022668 47.758901) (xy 204.939951 47.841618) (xy 204.888577 47.946704) (xy 204.888577 47.946707) + (xy 204.879146 48.01144) (xy 204.87865 48.014843) (xy 204.87865 48.478331) (xy 204.859743 48.536522) + (xy 204.849654 48.548335) (xy 202.078385 51.319604) (xy 202.023868 51.347381) (xy 202.008381 51.3486) + (xy 191.352918 51.3486) (xy 191.294727 51.329693) (xy 191.258763 51.280193) (xy 191.258763 51.219007) + (xy 191.282912 51.179598) (xy 193.484915 48.977596) (xy 193.539432 48.949819) (xy 193.554919 48.9486) + (xy 193.662407 48.9486) (xy 193.66241 48.9486) (xy 193.730543 48.938673) (xy 193.835633 48.887298) + (xy 193.918348 48.804583) (xy 193.969723 48.699493) (xy 193.97965 48.63136) (xy 193.97965 48.01484) + (xy 194.52865 48.01484) (xy 194.52865 48.63136) (xy 194.530519 48.644186) (xy 194.538577 48.699495) + (xy 194.587515 48.799599) (xy 194.589952 48.804583) (xy 194.672667 48.887298) (xy 194.720803 48.91083) + (xy 194.777754 48.938672) (xy 194.777755 48.938672) (xy 194.777757 48.938673) (xy 194.84589 48.9486) + (xy 194.845893 48.9486) (xy 195.312407 48.9486) (xy 195.31241 48.9486) (xy 195.380543 48.938673) + (xy 195.450049 48.904693) (xy 195.510629 48.896123) (xy 195.564679 48.924798) (xy 195.589154 48.968011) + (xy 195.59815 49.001585) (xy 195.598152 49.001589) (xy 195.657457 49.104308) (xy 195.657459 49.10431) + (xy 195.657461 49.104313) (xy 195.741337 49.188189) (xy 195.741339 49.18819) (xy 195.741341 49.188192) + (xy 195.84406 49.247497) (xy 195.844061 49.247497) (xy 195.844064 49.247499) (xy 195.958641 49.2782) + (xy 195.958643 49.2782) (xy 196.077257 49.2782) (xy 196.077259 49.2782) (xy 196.191836 49.247499) + (xy 196.191838 49.247497) (xy 196.19184 49.247497) (xy 196.294558 49.188192) (xy 196.294558 49.188191) + (xy 196.294563 49.188189) (xy 196.375557 49.107194) (xy 196.430072 49.079419) (xy 196.445559 49.0782) + (xy 196.974379 49.0782) (xy 197.020412 49.059132) (xy 197.066447 49.040064) (xy 197.128913 48.977596) + (xy 197.183429 48.949819) (xy 197.198917 48.9486) (xy 197.662407 48.9486) (xy 197.66241 48.9486) + (xy 197.730543 48.938673) (xy 197.835633 48.887298) (xy 197.918348 48.804583) (xy 197.969723 48.699493) + (xy 197.97965 48.63136) (xy 197.97965 48.01484) (xy 198.52865 48.01484) (xy 198.52865 48.63136) + (xy 198.530519 48.644186) (xy 198.538577 48.699495) (xy 198.587515 48.799599) (xy 198.589952 48.804583) + (xy 198.672667 48.887298) (xy 198.720803 48.91083) (xy 198.777754 48.938672) (xy 198.777755 48.938672) + (xy 198.777757 48.938673) (xy 198.84589 48.9486) (xy 198.845893 48.9486) (xy 199.312407 48.9486) + (xy 199.31241 48.9486) (xy 199.380543 48.938673) (xy 199.485633 48.887298) (xy 199.555287 48.817643) + (xy 199.609801 48.789867) (xy 199.670233 48.799438) (xy 199.695289 48.817641) (xy 199.730637 48.852989) + (xy 199.730639 48.85299) (xy 199.730641 48.852992) (xy 199.83336 48.912297) (xy 199.833361 48.912297) + (xy 199.833364 48.912299) (xy 199.947941 48.943) (xy 199.947943 48.943) (xy 200.066557 48.943) (xy 200.066559 48.943) + (xy 200.181136 48.912299) (xy 200.181138 48.912297) (xy 200.18114 48.912297) (xy 200.283858 48.852992) + (xy 200.283858 48.852991) (xy 200.283863 48.852989) (xy 200.364857 48.771994) (xy 200.419372 48.744219) + (xy 200.434859 48.743) (xy 200.848047 48.743) (xy 200.906238 48.761907) (xy 200.936987 48.798519) + (xy 200.939952 48.804583) (xy 201.022667 48.887298) (xy 201.070803 48.91083) (xy 201.127754 48.938672) + (xy 201.127755 48.938672) (xy 201.127757 48.938673) (xy 201.19589 48.9486) (xy 201.195893 48.9486) + (xy 201.662407 48.9486) (xy 201.66241 48.9486) (xy 201.730543 48.938673) (xy 201.835633 48.887298) + (xy 201.918348 48.804583) (xy 201.969723 48.699493) (xy 201.97965 48.63136) (xy 201.97965 48.01484) + (xy 202.52865 48.01484) (xy 202.52865 48.63136) (xy 202.530519 48.644186) (xy 202.538577 48.699495) + (xy 202.587515 48.799599) (xy 202.589952 48.804583) (xy 202.672667 48.887298) (xy 202.720803 48.91083) + (xy 202.777754 48.938672) (xy 202.777755 48.938672) (xy 202.777757 48.938673) (xy 202.84589 48.9486) + (xy 202.845893 48.9486) (xy 203.312407 48.9486) (xy 203.31241 48.9486) (xy 203.380543 48.938673) + (xy 203.485633 48.887298) (xy 203.568348 48.804583) (xy 203.619723 48.699493) (xy 203.62965 48.63136) + (xy 203.62965 48.01484) (xy 203.619723 47.946707) (xy 203.615028 47.937104) (xy 203.568348 47.841618) + (xy 203.568348 47.841617) (xy 203.485633 47.758902) (xy 203.385169 47.709788) (xy 203.341196 47.667246) + (xy 203.32965 47.620848) (xy 203.32965 45.2726) (xy 203.348557 45.214409) (xy 203.398057 45.178445) + (xy 203.42865 45.1736) (xy 203.466429 45.1736) (xy 203.493281 45.169346) (xy 203.558748 45.158978) + (xy 203.670023 45.10228) (xy 203.75833 45.013973) (xy 203.815028 44.902698) (xy 203.826714 44.828916) + (xy 203.82965 44.810378) (xy 203.82965 44.573101) (xy 204.32915 44.573101) (xy 204.32915 44.828916) + (xy 204.339556 44.93077) (xy 204.394245 45.095812) (xy 204.485518 45.243788) (xy 204.608461 45.366731) + (xy 204.756437 45.458004) (xy 204.921479 45.512693) (xy 205.023334 45.5231) (xy 205.066649 45.5231) + (xy 205.06665 45.523099) (xy 205.06665 44.573101) (xy 205.56665 44.573101) (xy 205.56665 45.523099) + (xy 205.566651 45.5231) (xy 205.609966 45.5231) (xy 205.71182 45.512693) (xy 205.876862 45.458004) + (xy 206.024838 45.366731) (xy 206.147781 45.243788) (xy 206.239054 45.095812) (xy 206.293743 44.93077) + (xy 206.30415 44.828916) (xy 206.30415 44.573101) (xy 206.304149 44.5731) (xy 205.566651 44.5731) + (xy 205.56665 44.573101) (xy 205.06665 44.573101) (xy 205.066649 44.5731) (xy 204.329151 44.5731) + (xy 204.32915 44.573101) (xy 203.82965 44.573101) (xy 203.82965 43.835822) (xy 203.828769 43.83026) + (xy 203.828769 43.830259) (xy 203.826714 43.817283) (xy 204.32915 43.817283) (xy 204.32915 44.073099) + (xy 204.329151 44.0731) (xy 205.066649 44.0731) (xy 205.06665 44.073099) (xy 205.06665 43.123101) + (xy 205.56665 43.123101) (xy 205.56665 44.073099) (xy 205.566651 44.0731) (xy 206.304149 44.0731) + (xy 206.30415 44.073099) (xy 206.30415 43.817283) (xy 206.293743 43.715429) (xy 206.239054 43.550387) + (xy 206.147781 43.402411) (xy 206.024838 43.279468) (xy 205.876862 43.188195) (xy 205.71182 43.133506) + (xy 205.609966 43.1231) (xy 205.566651 43.1231) (xy 205.56665 43.123101) (xy 205.06665 43.123101) + (xy 205.066649 43.1231) (xy 205.023334 43.1231) (xy 204.921479 43.133506) (xy 204.756437 43.188195) + (xy 204.608461 43.279468) (xy 204.485518 43.402411) (xy 204.394245 43.550387) (xy 204.339556 43.715429) + (xy 204.32915 43.817283) (xy 203.826714 43.817283) (xy 203.820993 43.781164) (xy 203.815028 43.743502) + (xy 203.75833 43.632227) (xy 203.670023 43.54392) (xy 203.67002 43.543918) (xy 203.670021 43.543918) + (xy 203.558751 43.487223) (xy 203.558748 43.487222) (xy 203.535667 43.483566) (xy 203.466429 43.4726) + (xy 203.466426 43.4726) (xy 202.916874 43.4726) (xy 202.916871 43.4726) (xy 202.824552 43.487222) + (xy 202.824548 43.487223) (xy 202.713279 43.543918) (xy 202.624968 43.632229) (xy 202.568273 43.743498) + (xy 202.568272 43.743502) (xy 202.55365 43.835821) (xy 202.55365 44.810378) (xy 202.560225 44.851889) + (xy 202.567543 44.898098) (xy 202.568272 44.902697) (xy 202.568273 44.902701) (xy 202.624968 45.01397) + (xy 202.62497 45.013973) (xy 202.713277 45.10228) (xy 202.713279 45.102281) (xy 202.713281 45.102282) + (xy 202.774595 45.133524) (xy 202.81786 45.176788) (xy 202.82865 45.221733) (xy 202.82865 47.620848) + (xy 202.809743 47.679039) (xy 202.77313 47.709789) (xy 202.672668 47.758901) (xy 202.589951 47.841618) + (xy 202.538577 47.946704) (xy 202.538577 47.946707) (xy 202.52865 48.01484) (xy 201.97965 48.01484) + (xy 201.969723 47.946707) (xy 201.965028 47.937104) (xy 201.918348 47.841618) (xy 201.918348 47.841617) + (xy 201.835633 47.758902) (xy 201.805574 47.744207) (xy 201.730545 47.707527) (xy 201.699417 47.702992) + (xy 201.66241 47.6976) (xy 201.19589 47.6976) (xy 201.161823 47.702563) (xy 201.127754 47.707527) + (xy 201.022668 47.758901) (xy 200.939951 47.841618) (xy 200.888577 47.946704) (xy 200.888577 47.946707) + (xy 200.879146 48.01144) (xy 200.87865 48.014843) (xy 200.87865 48.143) (xy 200.859743 48.201191) + (xy 200.810243 48.237155) (xy 200.77965 48.242) (xy 200.434859 48.242) (xy 200.376668 48.223093) + (xy 200.364861 48.213009) (xy 200.283863 48.132011) (xy 200.28386 48.132009) (xy 200.283858 48.132007) + (xy 200.181139 48.072702) (xy 200.18114 48.072702) (xy 200.150563 48.064509) (xy 200.066559 48.042) + (xy 199.947941 48.042) (xy 199.877817 48.060789) (xy 199.833359 48.072702) (xy 199.77815 48.104578) + (xy 199.718302 48.1173) (xy 199.662406 48.092413) (xy 199.631813 48.039425) (xy 199.62965 48.018842) + (xy 199.62965 48.014843) (xy 199.62965 48.01484) (xy 199.619723 47.946707) (xy 199.615028 47.937104) + (xy 199.568348 47.841618) (xy 199.568348 47.841617) (xy 199.485633 47.758902) (xy 199.385169 47.709788) + (xy 199.341196 47.667246) (xy 199.32965 47.620848) (xy 199.32965 45.2726) (xy 199.348557 45.214409) + (xy 199.398057 45.178445) (xy 199.42865 45.1736) (xy 199.466429 45.1736) (xy 199.493281 45.169346) + (xy 199.558748 45.158978) (xy 199.670023 45.10228) (xy 199.75833 45.013973) (xy 199.815028 44.902698) + (xy 199.826714 44.828916) (xy 199.82965 44.810378) (xy 199.82965 44.573101) (xy 200.32915 44.573101) + (xy 200.32915 44.828916) (xy 200.339556 44.93077) (xy 200.394245 45.095812) (xy 200.485518 45.243788) + (xy 200.608461 45.366731) (xy 200.756437 45.458004) (xy 200.921479 45.512693) (xy 201.023334 45.5231) + (xy 201.066649 45.5231) (xy 201.06665 45.523099) (xy 201.06665 44.573101) (xy 201.56665 44.573101) + (xy 201.56665 45.523099) (xy 201.566651 45.5231) (xy 201.609966 45.5231) (xy 201.71182 45.512693) + (xy 201.876862 45.458004) (xy 202.024838 45.366731) (xy 202.147781 45.243788) (xy 202.239054 45.095812) + (xy 202.293743 44.93077) (xy 202.30415 44.828916) (xy 202.30415 44.573101) (xy 202.304149 44.5731) + (xy 201.566651 44.5731) (xy 201.56665 44.573101) (xy 201.06665 44.573101) (xy 201.066649 44.5731) + (xy 200.329151 44.5731) (xy 200.32915 44.573101) (xy 199.82965 44.573101) (xy 199.82965 43.835822) + (xy 199.828769 43.83026) (xy 199.828769 43.830259) (xy 199.826714 43.817283) (xy 200.32915 43.817283) + (xy 200.32915 44.073099) (xy 200.329151 44.0731) (xy 201.066649 44.0731) (xy 201.06665 44.073099) + (xy 201.06665 43.123101) (xy 201.56665 43.123101) (xy 201.56665 44.073099) (xy 201.566651 44.0731) + (xy 202.304149 44.0731) (xy 202.30415 44.073099) (xy 202.30415 43.817283) (xy 202.293743 43.715429) + (xy 202.239054 43.550387) (xy 202.147781 43.402411) (xy 202.024838 43.279468) (xy 201.876862 43.188195) + (xy 201.71182 43.133506) (xy 201.609966 43.1231) (xy 201.566651 43.1231) (xy 201.56665 43.123101) + (xy 201.06665 43.123101) (xy 201.066649 43.1231) (xy 201.023334 43.1231) (xy 200.921479 43.133506) + (xy 200.756437 43.188195) (xy 200.608461 43.279468) (xy 200.485518 43.402411) (xy 200.394245 43.550387) + (xy 200.339556 43.715429) (xy 200.32915 43.817283) (xy 199.826714 43.817283) (xy 199.820993 43.781164) + (xy 199.815028 43.743502) (xy 199.75833 43.632227) (xy 199.670023 43.54392) (xy 199.67002 43.543918) + (xy 199.670021 43.543918) (xy 199.558751 43.487223) (xy 199.558748 43.487222) (xy 199.535667 43.483566) + (xy 199.466429 43.4726) (xy 199.466426 43.4726) (xy 198.916874 43.4726) (xy 198.916871 43.4726) + (xy 198.824552 43.487222) (xy 198.824548 43.487223) (xy 198.713279 43.543918) (xy 198.624968 43.632229) + (xy 198.568273 43.743498) (xy 198.568272 43.743502) (xy 198.55365 43.835821) (xy 198.55365 44.810378) + (xy 198.560225 44.851889) (xy 198.567543 44.898098) (xy 198.568272 44.902697) (xy 198.568273 44.902701) + (xy 198.624968 45.01397) (xy 198.62497 45.013973) (xy 198.713277 45.10228) (xy 198.713279 45.102281) + (xy 198.713281 45.102282) (xy 198.774595 45.133524) (xy 198.81786 45.176788) (xy 198.82865 45.221733) + (xy 198.82865 47.620848) (xy 198.809743 47.679039) (xy 198.77313 47.709789) (xy 198.672668 47.758901) + (xy 198.589951 47.841618) (xy 198.538577 47.946704) (xy 198.538577 47.946707) (xy 198.52865 48.01484) + (xy 197.97965 48.01484) (xy 197.969723 47.946707) (xy 197.965028 47.937104) (xy 197.918348 47.841618) + (xy 197.918348 47.841617) (xy 197.835633 47.758902) (xy 197.805574 47.744207) (xy 197.730545 47.707527) + (xy 197.699417 47.702992) (xy 197.66241 47.6976) (xy 197.19589 47.6976) (xy 197.161823 47.702563) + (xy 197.127754 47.707527) (xy 197.022668 47.758901) (xy 196.939951 47.841618) (xy 196.888577 47.946704) + (xy 196.888577 47.946707) (xy 196.879146 48.01144) (xy 196.87865 48.014843) (xy 196.87865 48.4782) + (xy 196.859743 48.536391) (xy 196.810243 48.572355) (xy 196.77965 48.5772) (xy 196.445559 48.5772) + (xy 196.387368 48.558293) (xy 196.375561 48.548209) (xy 196.294563 48.467211) (xy 196.29456 48.467209) + (xy 196.294558 48.467207) (xy 196.191839 48.407902) (xy 196.19184 48.407902) (xy 196.178301 48.404274) + (xy 196.077259 48.3772) (xy 195.958641 48.3772) (xy 195.888517 48.395989) (xy 195.844059 48.407902) + (xy 195.77815 48.445956) (xy 195.718302 48.458678) (xy 195.662406 48.433792) (xy 195.631813 48.380804) + (xy 195.62965 48.36022) (xy 195.62965 48.014843) (xy 195.62965 48.01484) (xy 195.619723 47.946707) + (xy 195.615028 47.937104) (xy 195.568348 47.841618) (xy 195.568348 47.841617) (xy 195.485633 47.758902) + (xy 195.385169 47.709788) (xy 195.341196 47.667246) (xy 195.32965 47.620848) (xy 195.32965 45.2726) + (xy 195.348557 45.214409) (xy 195.398057 45.178445) (xy 195.42865 45.1736) (xy 195.466429 45.1736) + (xy 195.493281 45.169346) (xy 195.558748 45.158978) (xy 195.670023 45.10228) (xy 195.75833 45.013973) + (xy 195.815028 44.902698) (xy 195.826714 44.828916) (xy 195.82965 44.810378) (xy 195.82965 44.573101) + (xy 196.32915 44.573101) (xy 196.32915 44.828916) (xy 196.339556 44.93077) (xy 196.394245 45.095812) + (xy 196.485518 45.243788) (xy 196.608461 45.366731) (xy 196.756437 45.458004) (xy 196.921479 45.512693) + (xy 197.023334 45.5231) (xy 197.066649 45.5231) (xy 197.06665 45.523099) (xy 197.06665 44.573101) + (xy 197.56665 44.573101) (xy 197.56665 45.523099) (xy 197.566651 45.5231) (xy 197.609966 45.5231) + (xy 197.71182 45.512693) (xy 197.876862 45.458004) (xy 198.024838 45.366731) (xy 198.147781 45.243788) + (xy 198.239054 45.095812) (xy 198.293743 44.93077) (xy 198.30415 44.828916) (xy 198.30415 44.573101) + (xy 198.304149 44.5731) (xy 197.566651 44.5731) (xy 197.56665 44.573101) (xy 197.06665 44.573101) + (xy 197.066649 44.5731) (xy 196.329151 44.5731) (xy 196.32915 44.573101) (xy 195.82965 44.573101) + (xy 195.82965 43.835822) (xy 195.828769 43.83026) (xy 195.828769 43.830259) (xy 195.826714 43.817283) + (xy 196.32915 43.817283) (xy 196.32915 44.073099) (xy 196.329151 44.0731) (xy 197.066649 44.0731) + (xy 197.06665 44.073099) (xy 197.06665 43.123101) (xy 197.56665 43.123101) (xy 197.56665 44.073099) + (xy 197.566651 44.0731) (xy 198.304149 44.0731) (xy 198.30415 44.073099) (xy 198.30415 43.817283) + (xy 198.293743 43.715429) (xy 198.239054 43.550387) (xy 198.147781 43.402411) (xy 198.024838 43.279468) + (xy 197.876862 43.188195) (xy 197.71182 43.133506) (xy 197.609966 43.1231) (xy 197.566651 43.1231) + (xy 197.56665 43.123101) (xy 197.06665 43.123101) (xy 197.066649 43.1231) (xy 197.023334 43.1231) + (xy 196.921479 43.133506) (xy 196.756437 43.188195) (xy 196.608461 43.279468) (xy 196.485518 43.402411) + (xy 196.394245 43.550387) (xy 196.339556 43.715429) (xy 196.32915 43.817283) (xy 195.826714 43.817283) + (xy 195.820993 43.781164) (xy 195.815028 43.743502) (xy 195.75833 43.632227) (xy 195.670023 43.54392) + (xy 195.67002 43.543918) (xy 195.670021 43.543918) (xy 195.558751 43.487223) (xy 195.558748 43.487222) + (xy 195.535667 43.483566) (xy 195.466429 43.4726) (xy 195.466426 43.4726) (xy 194.916874 43.4726) + (xy 194.916871 43.4726) (xy 194.824552 43.487222) (xy 194.824548 43.487223) (xy 194.713279 43.543918) + (xy 194.624968 43.632229) (xy 194.568273 43.743498) (xy 194.568272 43.743502) (xy 194.55365 43.835821) + (xy 194.55365 44.810378) (xy 194.560225 44.851889) (xy 194.567543 44.898098) (xy 194.568272 44.902697) + (xy 194.568273 44.902701) (xy 194.624968 45.01397) (xy 194.62497 45.013973) (xy 194.713277 45.10228) + (xy 194.713279 45.102281) (xy 194.713281 45.102282) (xy 194.774595 45.133524) (xy 194.81786 45.176788) + (xy 194.82865 45.221733) (xy 194.82865 47.620848) (xy 194.809743 47.679039) (xy 194.77313 47.709789) + (xy 194.672668 47.758901) (xy 194.589951 47.841618) (xy 194.538577 47.946704) (xy 194.538577 47.946707) + (xy 194.52865 48.01484) (xy 193.97965 48.01484) (xy 193.969723 47.946707) (xy 193.965028 47.937104) + (xy 193.918348 47.841618) (xy 193.918348 47.841617) (xy 193.835633 47.758902) (xy 193.805574 47.744207) + (xy 193.730545 47.707527) (xy 193.699417 47.702992) (xy 193.66241 47.6976) (xy 193.19589 47.6976) + (xy 193.161823 47.702563) (xy 193.127754 47.707527) (xy 193.022668 47.758901) (xy 192.939951 47.841618) + (xy 192.888577 47.946704) (xy 192.888577 47.946707) (xy 192.87865 48.01484) (xy 192.87865 48.63136) + (xy 192.880519 48.644186) (xy 192.888577 48.699495) (xy 192.912011 48.74743) (xy 192.920582 48.808012) + (xy 192.893074 48.860913) (xy 192.511154 49.242834) (xy 192.456637 49.270612) (xy 192.396205 49.261041) + (xy 192.35294 49.217776) (xy 192.34215 49.172831) (xy 192.34215 46.208281) (xy 192.342149 46.208272) + (xy 192.333417 46.164379) (xy 192.333415 46.164375) (xy 192.319341 46.143312) (xy 192.300154 46.114596) + (xy 192.277651 46.09956) (xy 192.250374 46.081334) (xy 192.25037 46.081332) (xy 192.206477 46.0726) + (xy 192.20647 46.0726) (xy 190.17683 46.0726) (xy 190.176822 46.0726) (xy 190.132929 46.081332) + (xy 190.132925 46.081334) (xy 190.083148 46.114594) (xy 190.083144 46.114598) (xy 190.049884 46.164375) + (xy 190.049882 46.164379) (xy 190.04115 46.208272) (xy 190.04115 49.437927) (xy 190.049882 49.48182) + (xy 190.049883 49.481822) (xy 190.057256 49.492857) (xy 190.073863 49.551746) (xy 190.052684 49.609149) + (xy 190.044944 49.617859) (xy 190.025573 49.63723) (xy 189.954383 49.743775) (xy 189.905349 49.862154) + (xy 189.905349 49.862156) (xy 189.880351 49.987828) (xy 189.880351 50.115971) (xy 189.887754 50.153189) + (xy 189.903204 50.230862) (xy 189.905349 50.241643) (xy 189.905349 50.241645) (xy 189.954383 50.360024) + (xy 190.016701 50.453292) (xy 190.025573 50.466569) (xy 190.116181 50.557177) (xy 190.116184 50.557179) + (xy 190.128763 50.565584) (xy 190.13002 50.567179) (xy 190.131953 50.567807) (xy 190.148852 50.591067) + (xy 190.166643 50.613634) (xy 190.166722 50.615663) (xy 190.167917 50.617307) (xy 190.167917 50.646061) + (xy 190.169045 50.674772) (xy 190.167917 50.67646) (xy 190.167917 50.678493) (xy 190.151015 50.701756) + (xy 190.135053 50.725646) (xy 190.133147 50.726349) (xy 190.131953 50.727993) (xy 190.104614 50.736875) + (xy 190.077649 50.746824) (xy 190.073762 50.7469) (xy 189.990359 50.7469) (xy 189.932168 50.727993) + (xy 189.920361 50.717909) (xy 189.839363 50.636911) (xy 189.83936 50.636909) (xy 189.839358 50.636907) + (xy 189.736639 50.577602) (xy 189.73664 50.577602) (xy 189.719834 50.573099) (xy 189.622059 50.5469) + (xy 189.503441 50.5469) (xy 189.433712 50.565584) (xy 189.388859 50.577602) (xy 189.286141 50.636907) + (xy 189.202257 50.720791) (xy 189.142952 50.823509) (xy 189.142418 50.825502) (xy 189.11225 50.938091) + (xy 189.11225 51.056709) (xy 189.136139 51.145864) (xy 189.142952 51.17129) (xy 189.159586 51.2001) + (xy 189.172308 51.259948) (xy 189.147421 51.315844) (xy 189.094433 51.346437) (xy 189.07385 51.3486) + (xy 184.072359 51.3486) (xy 184.014168 51.329693) (xy 184.002361 51.319609) (xy 183.921363 51.238611) + (xy 183.92136 51.238609) (xy 183.921358 51.238607) (xy 183.818639 51.179302) (xy 183.81864 51.179302) + (xy 183.802338 51.174934) (xy 183.704059 51.1486) (xy 183.585441 51.1486) (xy 183.528152 51.16395) + (xy 183.470862 51.179301) (xy 183.42625 51.205059) (xy 183.366402 51.21778) (xy 183.310506 51.192893) + (xy 183.279913 51.139905) (xy 183.27775 51.119322) (xy 183.27775 50.289053) (xy 183.296657 50.230862) + (xy 183.30674 50.219055) (xy 183.896927 49.628869) (xy 183.904457 49.617599) (xy 183.952505 49.57972) + (xy 183.986773 49.5736) (xy 184.406469 49.5736) (xy 184.40647 49.5736) (xy 184.406471 49.573599) + (xy 184.406477 49.573599) (xy 184.428273 49.569262) (xy 184.450372 49.564867) (xy 184.500154 49.531604) + (xy 184.533417 49.481822) (xy 184.54215 49.43792) (xy 184.54215 46.20828) (xy 184.542149 46.208278) + (xy 184.542149 46.208272) (xy 184.533417 46.164379) (xy 184.533415 46.164375) (xy 184.519341 46.143312) + (xy 184.500154 46.114596) (xy 184.477651 46.09956) (xy 184.450374 46.081334) (xy 184.45037 46.081332) + (xy 184.406477 46.0726) (xy 184.40647 46.0726) (xy 182.37683 46.0726) (xy 182.376822 46.0726) (xy 182.332929 46.081332) + (xy 182.332925 46.081334) (xy 182.283148 46.114594) (xy 182.283144 46.114598) (xy 182.249884 46.164375) + (xy 182.249882 46.164379) (xy 182.24115 46.208272) (xy 182.24115 46.695746) (xy 182.222243 46.753937) + (xy 182.172743 46.789901) (xy 182.111557 46.789901) (xy 182.072146 46.76575) (xy 180.991277 45.684881) + (xy 179.879497 44.573101) (xy 192.32915 44.573101) (xy 192.32915 44.828916) (xy 192.339556 44.93077) + (xy 192.394245 45.095812) (xy 192.485518 45.243788) (xy 192.608461 45.366731) (xy 192.756437 45.458004) + (xy 192.921479 45.512693) (xy 193.023334 45.5231) (xy 193.066649 45.5231) (xy 193.06665 45.523099) + (xy 193.06665 44.573101) (xy 193.56665 44.573101) (xy 193.56665 45.523099) (xy 193.566651 45.5231) + (xy 193.609966 45.5231) (xy 193.71182 45.512693) (xy 193.876862 45.458004) (xy 194.024838 45.366731) + (xy 194.147781 45.243788) (xy 194.239054 45.095812) (xy 194.293743 44.93077) (xy 194.30415 44.828916) + (xy 194.30415 44.573101) (xy 194.304149 44.5731) (xy 193.566651 44.5731) (xy 193.56665 44.573101) + (xy 193.06665 44.573101) (xy 193.066649 44.5731) (xy 192.329151 44.5731) (xy 192.32915 44.573101) + (xy 179.879497 44.573101) (xy 179.123679 43.817283) (xy 192.32915 43.817283) (xy 192.32915 44.073099) + (xy 192.329151 44.0731) (xy 193.066649 44.0731) (xy 193.06665 44.073099) (xy 193.06665 43.123101) + (xy 193.56665 43.123101) (xy 193.56665 44.073099) (xy 193.566651 44.0731) (xy 194.304149 44.0731) + (xy 194.30415 44.073099) (xy 194.30415 43.817283) (xy 194.293743 43.715429) (xy 194.239054 43.550387) + (xy 194.147781 43.402411) (xy 194.024838 43.279468) (xy 193.876862 43.188195) (xy 193.71182 43.133506) + (xy 193.609966 43.1231) (xy 193.566651 43.1231) (xy 193.56665 43.123101) (xy 193.06665 43.123101) + (xy 193.066649 43.1231) (xy 193.023334 43.1231) (xy 192.921479 43.133506) (xy 192.756437 43.188195) + (xy 192.608461 43.279468) (xy 192.485518 43.402411) (xy 192.394245 43.550387) (xy 192.339556 43.715429) + (xy 192.32915 43.817283) (xy 179.123679 43.817283) (xy 178.919319 43.612923) (xy 178.875423 43.583593) + (xy 178.812776 43.541734) (xy 178.694397 43.4927) (xy 178.694395 43.492699) (xy 178.694394 43.492699) + (xy 178.568719 43.4677) (xy 170.332481 43.4677) (xy 170.33248 43.4677) (xy 170.269643 43.480199) + (xy 170.206806 43.492699) (xy 170.206805 43.492699) (xy 170.206802 43.4927) (xy 170.088423 43.541734) + (xy 169.981881 43.612922) (xy 168.914662 44.680139) (xy 168.865182 44.705349) (xy 168.865372 44.705963) + (xy 168.861831 44.707057) (xy 168.860146 44.707916) (xy 168.858945 44.708099) (xy 168.858027 44.708232) + (xy 168.74544 44.763273) (xy 168.656823 44.85189) (xy 168.601784 44.964473) (xy 168.601349 44.96746) + (xy 168.594573 45.013973) (xy 168.59115 45.037467) (xy 168.59115 45.053305) (xy 168.583615 45.091189) + (xy 168.566148 45.133357) (xy 168.541151 45.259028) (xy 168.541151 45.387171) (xy 168.552532 45.444387) + (xy 168.562599 45.494999) (xy 168.565263 45.508388) (xy 168.562275 45.533626) (xy 168.562075 45.559036) + (xy 168.558732 45.563561) (xy 168.558071 45.569149) (xy 168.540819 45.587812) (xy 168.525722 45.608251) + (xy 168.520786 45.609484) (xy 168.516539 45.614079) (xy 168.467384 45.626699) (xy 168.457496 45.62662) + (xy 168.454059 45.6257) (xy 168.340749 45.6257) (xy 168.340369 45.625697) (xy 168.311723 45.616138) + (xy 168.282959 45.606793) (xy 168.282717 45.60646) (xy 168.282329 45.606331) (xy 168.264787 45.581782) + (xy 168.246995 45.557293) (xy 168.246911 45.556765) (xy 168.246757 45.556549) (xy 168.246762 45.555826) + (xy 168.24215 45.5267) (xy 168.24215 45.037467) (xy 168.239383 45.018475) (xy 168.231516 44.964475) + (xy 168.176476 44.851889) (xy 168.087861 44.763274) (xy 167.975275 44.708234) (xy 167.975276 44.708234) + (xy 167.941855 44.703365) (xy 167.902286 44.6976) (xy 167.381014 44.6976) (xy 167.341445 44.703365) + (xy 167.308023 44.708234) (xy 167.19544 44.763273) (xy 167.106823 44.85189) (xy 167.051784 44.964473) + (xy 167.051349 44.96746) (xy 167.04115 45.037464) (xy 155.991649 45.037464) (xy 155.991649 44.273113) + (xy 155.981157 44.170412) (xy 155.981154 44.1704) (xy 155.948913 44.073101) (xy 159.841651 44.073101) + (xy 159.841651 44.198086) (xy 159.852142 44.300787) (xy 159.852145 44.300799) (xy 159.907293 44.467224) + (xy 159.99933 44.61644) (xy 160.123309 44.740419) (xy 160.272525 44.832456) (xy 160.438956 44.887606) + (xy 160.541662 44.898099) (xy 161.441648 44.898099) (xy 161.44165 44.898098) (xy 161.44165 44.073101) + (xy 161.94165 44.073101) (xy 161.94165 44.898098) (xy 161.941651 44.898099) (xy 162.841636 44.898099) + (xy 162.944337 44.887607) (xy 162.944349 44.887604) (xy 163.110774 44.832456) (xy 163.25999 44.740419) + (xy 163.383969 44.61644) (xy 163.476006 44.467224) (xy 163.531156 44.300793) (xy 163.54165 44.198087) + (xy 163.54165 44.073101) (xy 163.541649 44.0731) (xy 161.941651 44.0731) (xy 161.94165 44.073101) + (xy 161.44165 44.073101) (xy 161.441649 44.0731) (xy 159.841652 44.0731) (xy 159.841651 44.073101) + (xy 155.948913 44.073101) (xy 155.945643 44.063233) (xy 155.926006 44.003974) (xy 155.833969 43.854759) + (xy 155.70999 43.73078) (xy 155.560774 43.638743) (xy 155.394343 43.583593) (xy 155.291637 43.5731) + (xy 154.941651 43.5731) (xy 154.94165 43.573101) (xy 154.44165 43.573101) (xy 154.441649 43.5731) + (xy 154.091663 43.5731) (xy 153.988962 43.583592) (xy 153.98895 43.583595) (xy 153.822525 43.638743) + (xy 153.673309 43.73078) (xy 153.54933 43.854759) (xy 153.457293 44.003975) (xy 153.402143 44.170406) + (xy 153.39165 44.273112) (xy 86.71847 44.273112) (xy 86.585915 44.100362) (xy 86.414388 43.928835) + (xy 86.414383 43.928831) (xy 86.414381 43.928829) (xy 86.221942 43.781166) (xy 86.156706 43.743502) (xy 86.011862 43.659876) (xy 86.011858 43.659874) (xy 86.011854 43.659872) (xy 85.787755 43.567048) (xy 85.787754 43.567047) (xy 85.78775 43.567046) (xy 85.553439 43.504262) (xy 85.553436 43.504261) (xy 85.553434 43.504261) (xy 85.312939 43.4726) (xy 85.312938 43.4726) (xy 85.070362 43.4726) (xy 85.07036 43.4726) @@ -44687,762 +50826,658 @@ (filled_polygon (layer "B.Cu") (pts - (xy 112.960285 94.019907) (xy 112.996249 94.069407) (xy 112.996249 94.130593) (xy 112.98783 94.1495) - (xy 112.959474 94.198613) (xy 112.959474 94.198614) (xy 112.959473 94.198616) (xy 112.91855 94.351343) - (xy 112.91855 94.509457) (xy 112.959473 94.662184) (xy 113.03853 94.799116) (xy 113.150334 94.91092) - (xy 113.287266 94.989977) (xy 113.439993 95.0309) (xy 113.439995 95.0309) (xy 113.598105 95.0309) - (xy 113.598107 95.0309) (xy 113.750834 94.989977) (xy 113.887766 94.91092) (xy 113.99957 94.799116) - (xy 114.078627 94.662184) (xy 114.078628 94.662179) (xy 114.079514 94.660645) (xy 114.124983 94.619703) - (xy 114.185833 94.613307) (xy 114.235252 94.640138) (xy 114.277834 94.68272) (xy 114.414766 94.761777) - (xy 114.567493 94.8027) (xy 114.567495 94.8027) (xy 114.725605 94.8027) (xy 114.725607 94.8027) - (xy 114.878334 94.761777) (xy 115.015266 94.68272) (xy 115.12707 94.570916) (xy 115.206127 94.433984) - (xy 115.24705 94.281257) (xy 115.24705 94.123143) (xy 115.247049 94.123142) (xy 115.246203 94.116711) - (xy 115.249206 94.116315) (xy 115.251755 94.06766) (xy 115.290258 94.020109) (xy 115.349358 94.00427) - (xy 115.399179 94.020818) (xy 115.474871 94.071394) (xy 115.564485 94.108513) (xy 115.620552 94.131737) - (xy 115.775207 94.1625) (xy 115.775208 94.1625) (xy 116.153685 94.1625) (xy 116.211876 94.181407) - (xy 116.24784 94.230907) (xy 116.249311 94.287122) (xy 116.23055 94.357143) (xy 116.23055 94.515257) - (xy 116.271473 94.667984) (xy 116.35053 94.804916) (xy 116.462334 94.91672) (xy 116.599266 94.995777) - (xy 116.751993 95.0367) (xy 116.751995 95.0367) (xy 116.912649 95.0367) (xy 116.97084 95.055607) - (xy 117.006804 95.105107) (xy 117.006804 95.166293) (xy 116.982653 95.205704) (xy 112.324753 99.863604) - (xy 112.270236 99.891381) (xy 112.254749 99.8926) (xy 111.07855 99.8926) (xy 111.020359 99.873693) - (xy 111.008546 99.863604) (xy 108.485661 97.340718) (xy 108.457884 97.286201) (xy 108.467455 97.225769) - (xy 108.51072 97.182504) (xy 108.571152 97.172933) (xy 108.574982 97.173617) (xy 108.595502 97.177699) - (xy 108.595505 97.177699) (xy 108.595508 97.1777) (xy 108.595509 97.1777) (xy 108.753191 97.1777) - (xy 108.753192 97.1777) (xy 108.907847 97.146937) (xy 109.053529 97.086594) (xy 109.184639 96.998989) - (xy 112.153632 94.029996) (xy 112.208149 94.002219) (xy 112.223636 94.001) (xy 112.902094 94.001) + (xy 124.300812 55.417107) (xy 124.336776 55.466607) (xy 124.336776 55.527793) (xy 124.312625 55.567204) + (xy 124.194514 55.685314) (xy 124.194511 55.685318) (xy 124.085017 55.849186) (xy 124.009599 56.031263) + (xy 124.009599 56.031265) (xy 123.97115 56.224556) (xy 123.97115 56.421643) (xy 124.009599 56.614934) + (xy 124.009599 56.614936) (xy 124.085017 56.797014) (xy 124.085019 56.797016) (xy 124.144453 56.885966) + (xy 124.161062 56.944854) (xy 124.139884 57.002257) (xy 124.089011 57.03625) (xy 124.087818 57.036578) + (xy 124.04991 57.046735) (xy 124.019059 57.055002) (xy 123.916341 57.114307) (xy 123.832457 57.198191) + (xy 123.773152 57.300909) (xy 123.755987 57.364969) (xy 123.74245 57.415491) (xy 123.74245 57.534109) + (xy 123.753191 57.574195) (xy 123.773152 57.64869) (xy 123.832457 57.751408) (xy 123.832459 57.75141) + (xy 123.832461 57.751413) (xy 123.916337 57.835289) (xy 123.916339 57.83529) (xy 123.916341 57.835292) + (xy 124.01906 57.894597) (xy 124.019061 57.894597) (xy 124.019064 57.894599) (xy 124.133641 57.9253) + (xy 124.133643 57.9253) (xy 124.252257 57.9253) (xy 124.252259 57.9253) (xy 124.366836 57.894599) + (xy 124.366838 57.894597) (xy 124.36684 57.894597) (xy 124.469558 57.835292) (xy 124.469558 57.835291) + (xy 124.469563 57.835289) (xy 124.553439 57.751413) (xy 124.581642 57.702564) (xy 124.612747 57.64869) + (xy 124.612747 57.648688) (xy 124.612749 57.648686) (xy 124.64345 57.534109) (xy 124.64345 57.415491) + (xy 124.643449 57.415488) (xy 124.642884 57.411198) (xy 124.654029 57.351036) (xy 124.698409 57.308915) + (xy 124.75907 57.300924) (xy 124.760236 57.301148) (xy 124.873109 57.3236) (xy 124.87311 57.3236) + (xy 125.07019 57.3236) (xy 125.070191 57.3236) (xy 125.263485 57.285151) (xy 125.445564 57.209732) + (xy 125.609432 57.100239) (xy 125.748789 56.960882) (xy 125.858282 56.797014) (xy 125.933701 56.614935) + (xy 125.97215 56.421641) (xy 125.97215 56.224559) (xy 125.933701 56.031265) (xy 125.858282 55.849186) + (xy 125.748789 55.685318) (xy 125.630675 55.567204) (xy 125.602898 55.512687) (xy 125.612469 55.452255) + (xy 125.655734 55.40899) (xy 125.700679 55.3982) (xy 126.782621 55.3982) (xy 126.840812 55.417107) + (xy 126.876776 55.466607) (xy 126.876776 55.527793) (xy 126.852625 55.567204) (xy 126.734514 55.685314) + (xy 126.734511 55.685318) (xy 126.625017 55.849186) (xy 126.549599 56.031263) (xy 126.549599 56.031265) + (xy 126.51115 56.224556) (xy 126.51115 56.421643) (xy 126.549599 56.614934) (xy 126.549599 56.614936) + (xy 126.625017 56.797013) (xy 126.652558 56.838231) (xy 126.734511 56.960882) (xy 126.873868 57.100239) + (xy 127.037736 57.209732) (xy 127.219815 57.285151) (xy 127.413109 57.3236) (xy 127.41311 57.3236) + (xy 127.61019 57.3236) (xy 127.610191 57.3236) (xy 127.803485 57.285151) (xy 127.985564 57.209732) + (xy 128.149432 57.100239) (xy 128.288789 56.960882) (xy 128.398282 56.797014) (xy 128.473701 56.614935) + (xy 128.51215 56.421641) (xy 128.51215 56.224559) (xy 128.473701 56.031265) (xy 128.398282 55.849186) + (xy 128.288789 55.685318) (xy 128.170675 55.567204) (xy 128.142898 55.512687) (xy 128.152469 55.452255) + (xy 128.195734 55.40899) (xy 128.240679 55.3982) (xy 129.322621 55.3982) (xy 129.380812 55.417107) + (xy 129.416776 55.466607) (xy 129.416776 55.527793) (xy 129.392625 55.567204) (xy 129.274514 55.685314) + (xy 129.274511 55.685318) (xy 129.165017 55.849186) (xy 129.089599 56.031263) (xy 129.089599 56.031265) + (xy 129.05115 56.224556) (xy 129.05115 56.421643) (xy 129.089599 56.614934) (xy 129.089599 56.614936) + (xy 129.156824 56.777234) (xy 129.161624 56.838231) (xy 129.135364 56.885123) (xy 115.887385 70.133104) + (xy 115.832868 70.160881) (xy 115.817381 70.1621) (xy 94.665859 70.1621) (xy 94.607668 70.143193) + (xy 94.595861 70.133109) (xy 94.514863 70.052111) (xy 94.51486 70.052109) (xy 94.514858 70.052107) + (xy 94.412139 69.992802) (xy 94.41214 69.992802) (xy 94.382119 69.984758) (xy 94.297559 69.9621) + (xy 94.178941 69.9621) (xy 94.108817 69.980889) (xy 94.064359 69.992802) (xy 93.961641 70.052107) + (xy 93.877757 70.135991) (xy 93.818452 70.238709) (xy 93.818451 70.238714) (xy 93.78775 70.353291) + (xy 93.78775 70.471909) (xy 93.814824 70.572951) (xy 93.818452 70.58649) (xy 93.877757 70.689208) + (xy 93.877759 70.68921) (xy 93.877761 70.689213) (xy 93.961637 70.773089) (xy 93.961639 70.77309) + (xy 93.961641 70.773092) (xy 94.06436 70.832397) (xy 94.064361 70.832397) (xy 94.064364 70.832399) + (xy 94.178941 70.8631) (xy 94.178943 70.8631) (xy 94.297557 70.8631) (xy 94.297559 70.8631) (xy 94.412136 70.832399) + (xy 94.412138 70.832397) (xy 94.41214 70.832397) (xy 94.514858 70.773092) (xy 94.514858 70.773091) + (xy 94.514863 70.773089) (xy 94.595857 70.692094) (xy 94.650372 70.664319) (xy 94.665859 70.6631) + (xy 103.970741 70.6631) (xy 104.028932 70.682007) (xy 104.064896 70.731507) (xy 104.064896 70.792693) + (xy 104.040746 70.832101) (xy 104.009748 70.8631) (xy 103.984858 70.88799) (xy 103.984857 70.887991) + (xy 103.925552 70.990709) (xy 103.925551 70.990714) (xy 103.89485 71.105291) (xy 103.89485 71.223909) + (xy 103.921924 71.324951) (xy 103.925552 71.33849) (xy 103.984857 71.441208) (xy 103.984859 71.44121) + (xy 103.984861 71.441213) (xy 104.068737 71.525089) (xy 104.068739 71.52509) (xy 104.068741 71.525092) + (xy 104.17146 71.584397) (xy 104.171461 71.584397) (xy 104.171464 71.584399) (xy 104.286041 71.6151) + (xy 104.286043 71.6151) (xy 104.404657 71.6151) (xy 104.404659 71.6151) (xy 104.519236 71.584399) + (xy 104.519238 71.584397) (xy 104.51924 71.584397) (xy 104.621958 71.525092) (xy 104.621958 71.525091) + (xy 104.621963 71.525089) (xy 104.705839 71.441213) (xy 104.765149 71.338486) (xy 104.79585 71.223909) + (xy 104.79585 71.105291) (xy 104.765149 70.990714) (xy 104.765147 70.990711) (xy 104.765147 70.990709) + (xy 104.705842 70.887991) (xy 104.70584 70.887989) (xy 104.705839 70.887987) (xy 104.649953 70.832101) + (xy 104.622178 70.777587) (xy 104.631749 70.717155) (xy 104.675014 70.67389) (xy 104.719959 70.6631) + (xy 116.011979 70.6631) (xy 116.070035 70.639051) (xy 116.104047 70.624964) (xy 129.489627 57.239382) + (xy 129.544142 57.211607) (xy 129.597512 57.217923) (xy 129.759815 57.285151) (xy 129.953109 57.3236) + (xy 129.95311 57.3236) (xy 130.15019 57.3236) (xy 130.150191 57.3236) (xy 130.343485 57.285151) + (xy 130.525564 57.209732) (xy 130.689432 57.100239) (xy 130.828789 56.960882) (xy 130.938282 56.797014) + (xy 131.013701 56.614935) (xy 131.05215 56.421641) (xy 131.05215 56.224559) (xy 131.013701 56.031265) + (xy 130.938282 55.849186) (xy 130.828789 55.685318) (xy 130.710675 55.567204) (xy 130.682898 55.512687) + (xy 130.692469 55.452255) (xy 130.735734 55.40899) (xy 130.780679 55.3982) (xy 131.862621 55.3982) + (xy 131.920812 55.417107) (xy 131.956776 55.466607) (xy 131.956776 55.527793) (xy 131.932625 55.567204) + (xy 131.814514 55.685314) (xy 131.814511 55.685318) (xy 131.705017 55.849186) (xy 131.629599 56.031263) + (xy 131.629599 56.031265) (xy 131.59115 56.224556) (xy 131.59115 56.421643) (xy 131.629599 56.614934) + (xy 131.629599 56.614936) (xy 131.696824 56.777234) (xy 131.701624 56.838231) (xy 131.675364 56.885123) + (xy 121.353785 67.206704) (xy 121.299268 67.234481) (xy 121.283781 67.2357) (xy 120.906854 67.2357) + (xy 120.880533 67.230465) (xy 120.880154 67.231881) (xy 120.873887 67.230201) (xy 120.873886 67.230201) + (xy 120.759309 67.1995) (xy 120.640691 67.1995) (xy 120.570567 67.218289) (xy 120.526109 67.230202) + (xy 120.423391 67.289507) (xy 120.339507 67.373391) (xy 120.280202 67.476109) (xy 120.280201 67.476114) + (xy 120.2495 67.590691) (xy 120.2495 67.709309) (xy 120.256876 67.736836) (xy 120.280202 67.82389) + (xy 120.339507 67.926608) (xy 120.339509 67.92661) (xy 120.339511 67.926613) (xy 120.423387 68.010489) + (xy 120.423389 68.01049) (xy 120.423391 68.010492) (xy 120.52611 68.069797) (xy 120.526111 68.069797) + (xy 120.526114 68.069799) (xy 120.640691 68.1005) (xy 120.640693 68.1005) (xy 120.759307 68.1005) + (xy 120.759309 68.1005) (xy 120.873886 68.069799) (xy 120.873888 68.069797) (xy 120.87389 68.069797) + (xy 120.976608 68.010492) (xy 120.976608 68.010491) (xy 120.976613 68.010489) (xy 121.060489 67.926613) + (xy 121.119799 67.823886) (xy 121.1235 67.810075) (xy 121.156825 67.758761) (xy 121.213947 67.736836) + (xy 121.219126 67.7367) (xy 121.478379 67.7367) (xy 121.544511 67.709307) (xy 121.570447 67.698564) + (xy 132.029627 57.239382) (xy 132.084142 57.211607) (xy 132.137512 57.217923) (xy 132.299815 57.285151) + (xy 132.493109 57.3236) (xy 132.49311 57.3236) (xy 132.69019 57.3236) (xy 132.690191 57.3236) (xy 132.883485 57.285151) + (xy 133.044799 57.218332) (xy 133.105794 57.213532) (xy 133.157963 57.245502) (xy 133.181378 57.30203) + (xy 133.167094 57.361524) (xy 133.152687 57.379801) (xy 118.645385 71.887104) (xy 118.590868 71.914881) + (xy 118.575381 71.9161) (xy 96.908659 71.9161) (xy 96.850468 71.897193) (xy 96.838661 71.887109) + (xy 96.757663 71.806111) (xy 96.75766 71.806109) (xy 96.757658 71.806107) (xy 96.654939 71.746802) + (xy 96.65494 71.746802) (xy 96.641401 71.743174) (xy 96.540359 71.7161) (xy 96.421741 71.7161) (xy 96.351617 71.734889) + (xy 96.307159 71.746802) (xy 96.204441 71.806107) (xy 96.120557 71.889991) (xy 96.061252 71.992709) + (xy 96.061251 71.992714) (xy 96.03055 72.107291) (xy 96.03055 72.225909) (xy 96.047001 72.287304) + (xy 96.061252 72.34049) (xy 96.120557 72.443208) (xy 96.120559 72.44321) (xy 96.120561 72.443213) + (xy 96.204437 72.527089) (xy 96.204439 72.52709) (xy 96.204441 72.527092) (xy 96.30716 72.586397) + (xy 96.307161 72.586397) (xy 96.307164 72.586399) (xy 96.421741 72.6171) (xy 96.421743 72.6171) + (xy 96.540357 72.6171) (xy 96.540359 72.6171) (xy 96.654936 72.586399) (xy 96.654938 72.586397) + (xy 96.65494 72.586397) (xy 96.757658 72.527092) (xy 96.757658 72.527091) (xy 96.757663 72.527089) + (xy 96.838657 72.446094) (xy 96.893172 72.418319) (xy 96.908659 72.4171) (xy 118.769979 72.4171) + (xy 118.828035 72.393051) (xy 118.862047 72.378964) (xy 130.050318 61.190691) (xy 135.0495 61.190691) + (xy 135.0495 61.309309) (xy 135.067154 61.375193) (xy 135.080202 61.42389) (xy 135.139507 61.526608) + (xy 135.139509 61.52661) (xy 135.139511 61.526613) (xy 135.223387 61.610489) (xy 135.223389 61.61049) + (xy 135.223391 61.610492) (xy 135.32611 61.669797) (xy 135.326111 61.669797) (xy 135.326114 61.669799) + (xy 135.440691 61.7005) (xy 135.440693 61.7005) (xy 135.559307 61.7005) (xy 135.559309 61.7005) + (xy 135.673886 61.669799) (xy 135.673888 61.669797) (xy 135.67389 61.669797) (xy 135.776608 61.610492) + (xy 135.776608 61.610491) (xy 135.776613 61.610489) (xy 135.860489 61.526613) (xy 135.868989 61.511891) + (xy 135.919797 61.42389) (xy 135.919797 61.423888) (xy 135.919799 61.423886) (xy 135.9505 61.309309) + (xy 135.9505 61.190691) (xy 135.919799 61.076114) (xy 135.919797 61.076111) (xy 135.919797 61.076109) + (xy 135.860492 60.973391) (xy 135.86049 60.973389) (xy 135.860489 60.973387) (xy 135.776613 60.889511) + (xy 135.77661 60.889509) (xy 135.776608 60.889507) (xy 135.673889 60.830202) (xy 135.67389 60.830202) + (xy 135.645519 60.8226) (xy 135.559309 60.7995) (xy 135.440691 60.7995) (xy 135.370567 60.818289) + (xy 135.326109 60.830202) (xy 135.223391 60.889507) (xy 135.139507 60.973391) (xy 135.080202 61.076109) + (xy 135.0674 61.123886) (xy 135.0495 61.190691) (xy 130.050318 61.190691) (xy 134.247317 56.993691) + (xy 134.301832 56.965916) (xy 134.362264 56.975487) (xy 134.387323 56.993694) (xy 134.493859 57.100231) + (xy 134.493863 57.100234) (xy 134.493868 57.100239) (xy 134.657736 57.209732) (xy 134.839815 57.285151) + (xy 135.033109 57.3236) (xy 135.03311 57.3236) (xy 135.23019 57.3236) (xy 135.230191 57.3236) (xy 135.423485 57.285151) + (xy 135.605564 57.209732) (xy 135.769432 57.100239) (xy 135.908789 56.960882) (xy 136.005327 56.816402) + (xy 136.053375 56.778524) (xy 136.114514 56.776122) (xy 136.165387 56.810115) (xy 136.179105 56.833519) + (xy 136.189284 56.858094) (xy 136.189285 56.858095) (xy 136.189286 56.858097) (xy 138.736776 59.405587) + (xy 141.262785 61.931596) (xy 141.290562 61.986113) (xy 141.280991 62.046545) (xy 141.237726 62.08981) + (xy 141.192781 62.1006) (xy 129.619721 62.1006) (xy 129.527655 62.138734) (xy 118.994485 72.671904) + (xy 118.939968 72.699681) (xy 118.924481 72.7009) (xy 110.944709 72.7009) (xy 110.944701 72.700899) + (xy 110.933178 72.700899) (xy 110.833522 72.700899) (xy 110.833521 72.700899) (xy 110.806555 72.712068) + (xy 110.768419 72.727865) (xy 110.752623 72.734408) (xy 110.741452 72.739036) (xy 110.670985 72.809504) + (xy 110.670984 72.809504) (xy 110.293673 73.186814) (xy 110.239157 73.214591) (xy 110.185785 73.208274) + (xy 110.023485 73.141049) (xy 109.830193 73.1026) (xy 109.830191 73.1026) (xy 109.633109 73.1026) + (xy 109.633106 73.1026) (xy 109.439815 73.141049) (xy 109.439813 73.141049) (xy 109.257736 73.216467) + (xy 109.093868 73.325961) (xy 109.093864 73.325964) (xy 108.954514 73.465314) (xy 108.954511 73.465318) + (xy 108.845017 73.629186) (xy 108.769599 73.811263) (xy 108.769599 73.811265) (xy 108.73115 74.004556) + (xy 108.73115 74.201643) (xy 108.769599 74.394934) (xy 108.769599 74.394936) (xy 108.845017 74.577013) + (xy 108.862448 74.6031) (xy 108.954511 74.740882) (xy 108.954514 74.740885) (xy 109.079325 74.865696) + (xy 109.107102 74.920213) (xy 109.097531 74.980645) (xy 109.054266 75.02391) (xy 109.009321 75.0347) + (xy 108.29115 75.0347) (xy 108.232959 75.015793) (xy 108.196995 74.966293) (xy 108.19215 74.9357) + (xy 108.19215 73.238281) (xy 108.192149 73.238272) (xy 108.183417 73.194379) (xy 108.183415 73.194375) + (xy 108.175268 73.182182) (xy 108.150154 73.144596) (xy 108.14949 73.144152) (xy 108.100374 73.111334) + (xy 108.10037 73.111332) (xy 108.056477 73.1026) (xy 108.05647 73.1026) (xy 106.32683 73.1026) (xy 106.326822 73.1026) + (xy 106.282929 73.111332) (xy 106.282925 73.111334) (xy 106.233148 73.144594) (xy 106.233144 73.144598) + (xy 106.199884 73.194375) (xy 106.199882 73.194379) (xy 106.19115 73.238272) (xy 106.19115 74.641531) + (xy 106.172243 74.699722) (xy 106.122743 74.735686) (xy 106.061557 74.735686) (xy 106.022146 74.711535) + (xy 105.674411 74.3638) (xy 105.211547 73.900936) (xy 105.211545 73.900935) (xy 105.211544 73.900934) + (xy 105.119479 73.8628) (xy 105.119478 73.8628) (xy 98.510259 73.8628) (xy 98.452068 73.843893) + (xy 98.440261 73.833809) (xy 98.359263 73.752811) (xy 98.35926 73.752809) (xy 98.359258 73.752807) + (xy 98.256539 73.693502) (xy 98.25654 73.693502) (xy 98.243001 73.689874) (xy 98.141959 73.6628) + (xy 98.023341 73.6628) (xy 97.953217 73.681589) (xy 97.908759 73.693502) (xy 97.806041 73.752807) + (xy 97.722157 73.836691) (xy 97.662852 73.939409) (xy 97.662851 73.939414) (xy 97.63215 74.053991) + (xy 97.63215 74.172609) (xy 97.659224 74.273651) (xy 97.662852 74.28719) (xy 97.722157 74.389908) + (xy 97.722159 74.38991) (xy 97.722161 74.389913) (xy 97.806037 74.473789) (xy 97.806039 74.47379) + (xy 97.806041 74.473792) (xy 97.90876 74.533097) (xy 97.908761 74.533097) (xy 97.908764 74.533099) + (xy 98.023341 74.5638) (xy 98.023343 74.5638) (xy 98.141957 74.5638) (xy 98.141959 74.5638) (xy 98.256536 74.533099) + (xy 98.256538 74.533097) (xy 98.25654 74.533097) (xy 98.359258 74.473792) (xy 98.359258 74.473791) + (xy 98.359263 74.473789) (xy 98.440257 74.392794) (xy 98.494772 74.365019) (xy 98.510259 74.3638) + (xy 104.924881 74.3638) (xy 104.983072 74.382707) (xy 104.994885 74.392796) (xy 105.482628 74.880539) + (xy 105.892986 75.290896) (xy 105.920763 75.345413) (xy 105.911192 75.405845) (xy 105.867927 75.44911) + (xy 105.822982 75.4599) (xy 102.512001 75.4599) (xy 102.45381 75.440993) (xy 102.417846 75.391493) + (xy 102.416379 75.386541) (xy 102.396249 75.311414) (xy 102.396247 75.311411) (xy 102.396247 75.311409) + (xy 102.336942 75.208691) (xy 102.33694 75.208689) (xy 102.336939 75.208687) (xy 102.253063 75.124811) + (xy 102.25306 75.124809) (xy 102.253058 75.124807) (xy 102.150339 75.065502) (xy 102.15034 75.065502) + (xy 102.136801 75.061874) (xy 102.035759 75.0348) (xy 101.917141 75.0348) (xy 101.847017 75.053589) + (xy 101.802559 75.065502) (xy 101.699841 75.124807) (xy 101.615957 75.208691) (xy 101.556652 75.311409) + (xy 101.547541 75.345413) (xy 101.52595 75.425991) (xy 101.52595 75.544609) (xy 101.532435 75.568811) + (xy 101.556652 75.65919) (xy 101.615957 75.761908) (xy 101.615959 75.76191) (xy 101.615961 75.761913) + (xy 101.699837 75.845789) (xy 101.699839 75.84579) (xy 101.699841 75.845792) (xy 101.80256 75.905097) + (xy 101.802561 75.905097) (xy 101.802564 75.905099) (xy 101.917141 75.9358) (xy 101.917143 75.9358) + (xy 102.03576 75.9358) (xy 102.036909 75.935492) (xy 102.037762 75.935536) (xy 102.042196 75.934953) + (xy 102.042304 75.935774) (xy 102.098011 75.938688) (xy 102.100365 75.939626) (xy 102.151722 75.9609) + (xy 102.251377 75.9609) (xy 127.31605 75.9609) (xy 127.374241 75.979807) (xy 127.410205 76.029307) + (xy 127.41505 76.0599) (xy 127.41505 80.757647) (xy 127.396143 80.815838) (xy 127.346643 80.851802) + (xy 127.285457 80.851802) (xy 127.235957 80.815838) (xy 127.233735 80.812649) (xy 127.196983 80.757647) + (xy 127.169952 80.717192) (xy 127.037558 80.584798) (xy 126.983854 80.548914) (xy 126.881888 80.480781) + (xy 126.881879 80.480777) (xy 126.708899 80.409126) (xy 126.525268 80.3726) (xy 126.525266 80.3726) + (xy 126.338034 80.3726) (xy 126.338031 80.3726) (xy 126.1544 80.409126) (xy 125.98142 80.480777) + (xy 125.981411 80.480781) (xy 125.825742 80.584798) (xy 125.825738 80.584801) (xy 125.693351 80.717188) + (xy 125.693348 80.717192) (xy 125.589331 80.872861) (xy 125.589327 80.87287) (xy 125.517676 81.04585) + (xy 125.48115 81.229481) (xy 125.48115 81.416718) (xy 125.517676 81.600349) (xy 125.589327 81.773329) + (xy 125.589331 81.773338) (xy 125.645965 81.858095) (xy 125.693348 81.929008) (xy 125.825742 82.061402) + (xy 125.890104 82.104407) (xy 125.981411 82.165418) (xy 125.981417 82.16542) (xy 125.981419 82.165422) + (xy 126.154399 82.237073) (xy 126.338034 82.2736) (xy 126.338035 82.2736) (xy 126.525265 82.2736) + (xy 126.525266 82.2736) (xy 126.708901 82.237073) (xy 126.881881 82.165422) (xy 126.881884 82.165419) + (xy 126.881888 82.165418) (xy 126.928454 82.134303) (xy 127.037558 82.061402) (xy 127.169952 81.929008) + (xy 127.233735 81.83355) (xy 127.281785 81.795671) (xy 127.342923 81.793269) (xy 127.393797 81.827262) + (xy 127.414974 81.884666) (xy 127.41505 81.888552) (xy 127.41505 88.657547) (xy 127.396143 88.715738) + (xy 127.346643 88.751702) (xy 127.285457 88.751702) (xy 127.246046 88.727551) (xy 127.236322 88.717827) + (xy 127.236319 88.717824) (xy 127.193876 88.689465) (xy 127.129783 88.646638) (xy 127.129775 88.646634) + (xy 127.011397 88.5976) (xy 127.011395 88.597599) (xy 127.011394 88.597599) (xy 126.885719 88.5726) + (xy 126.687581 88.5726) (xy 126.68758 88.5726) (xy 126.638772 88.582309) (xy 126.561906 88.597599) + (xy 126.561905 88.597599) (xy 126.561902 88.5976) (xy 126.443523 88.646634) (xy 126.336984 88.71782) + (xy 126.19677 88.858034) (xy 126.125583 88.964575) (xy 126.076549 89.082954) (xy 126.076549 89.082956) + (xy 126.051551 89.208628) (xy 126.051551 89.315797) (xy 126.032644 89.373988) (xy 126.022555 89.385801) + (xy 125.529753 89.878604) (xy 125.475236 89.906381) (xy 125.466509 89.907067) (xy 125.462469 89.907599) + (xy 125.328814 89.943412) (xy 125.208985 90.012595) (xy 125.111145 90.110435) (xy 125.041962 90.230264) + (xy 125.00615 90.363917) (xy 125.00615 90.502283) (xy 125.041962 90.635935) (xy 125.041963 90.635938) + (xy 125.099313 90.735271) (xy 125.112035 90.795119) (xy 125.087148 90.851015) (xy 125.08358 90.854775) + (xy 124.66107 91.277284) (xy 124.606554 91.305061) (xy 124.546122 91.29549) (xy 124.502857 91.252225) + (xy 124.495443 91.232911) (xy 124.474249 91.153814) (xy 124.474247 91.153811) (xy 124.474247 91.153809) + (xy 124.414942 91.051091) (xy 124.41494 91.051089) (xy 124.414939 91.051087) (xy 124.331063 90.967211) + (xy 124.33106 90.967209) (xy 124.331058 90.967207) (xy 124.228339 90.907902) (xy 124.22834 90.907902) + (xy 124.214801 90.904274) (xy 124.113759 90.8772) (xy 123.999219 90.8772) (xy 123.941028 90.858293) + (xy 123.929215 90.848204) (xy 119.654398 86.573387) (xy 115.353147 82.272136) (xy 115.353145 82.272135) + (xy 115.353144 82.272134) (xy 115.261079 82.234) (xy 115.261078 82.234) (xy 114.87103 82.234) (xy 114.812839 82.215093) + (xy 114.776875 82.165593) (xy 114.776875 82.104407) (xy 114.790937 82.076809) (xy 114.843511 82.004447) + (xy 114.936406 81.822127) (xy 114.99964 81.627514) (xy 115.008259 81.5731) (xy 114.164662 81.5731) + (xy 114.197575 81.516093) (xy 114.23165 81.388926) (xy 114.23165 81.257274) (xy 114.224203 81.229481) + (xy 115.32115 81.229481) (xy 115.32115 81.416718) (xy 115.357676 81.600349) (xy 115.429327 81.773329) + (xy 115.429331 81.773338) (xy 115.485965 81.858095) (xy 115.533348 81.929008) (xy 115.665742 82.061402) + (xy 115.730104 82.104407) (xy 115.821411 82.165418) (xy 115.821417 82.16542) (xy 115.821419 82.165422) + (xy 115.994399 82.237073) (xy 116.178034 82.2736) (xy 116.178035 82.2736) (xy 116.365265 82.2736) + (xy 116.365266 82.2736) (xy 116.548901 82.237073) (xy 116.721881 82.165422) (xy 116.721884 82.165419) + (xy 116.721888 82.165418) (xy 116.768454 82.134303) (xy 116.877558 82.061402) (xy 117.009952 81.929008) + (xy 117.103486 81.789025) (xy 117.113968 81.773338) (xy 117.113969 81.773334) (xy 117.113972 81.773331) + (xy 117.185623 81.600351) (xy 117.22215 81.416716) (xy 117.22215 81.229484) (xy 117.222149 81.229481) + (xy 117.86115 81.229481) (xy 117.86115 81.416718) (xy 117.897676 81.600349) (xy 117.969327 81.773329) + (xy 117.969331 81.773338) (xy 118.025965 81.858095) (xy 118.073348 81.929008) (xy 118.205742 82.061402) + (xy 118.270104 82.104407) (xy 118.361411 82.165418) (xy 118.361417 82.16542) (xy 118.361419 82.165422) + (xy 118.534399 82.237073) (xy 118.718034 82.2736) (xy 118.718035 82.2736) (xy 118.905265 82.2736) + (xy 118.905266 82.2736) (xy 119.088901 82.237073) (xy 119.261881 82.165422) (xy 119.261884 82.165419) + (xy 119.261888 82.165418) (xy 119.308454 82.134303) (xy 119.417558 82.061402) (xy 119.549952 81.929008) + (xy 119.643486 81.789025) (xy 119.653968 81.773338) (xy 119.653969 81.773334) (xy 119.653972 81.773331) + (xy 119.725623 81.600351) (xy 119.76215 81.416716) (xy 119.76215 81.229484) (xy 119.762149 81.229481) + (xy 120.40115 81.229481) (xy 120.40115 81.416718) (xy 120.437676 81.600349) (xy 120.509327 81.773329) + (xy 120.509331 81.773338) (xy 120.565965 81.858095) (xy 120.613348 81.929008) (xy 120.745742 82.061402) + (xy 120.810104 82.104407) (xy 120.901411 82.165418) (xy 120.901417 82.16542) (xy 120.901419 82.165422) + (xy 121.074399 82.237073) (xy 121.258034 82.2736) (xy 121.258035 82.2736) (xy 121.445265 82.2736) + (xy 121.445266 82.2736) (xy 121.628901 82.237073) (xy 121.801881 82.165422) (xy 121.801884 82.165419) + (xy 121.801888 82.165418) (xy 121.848454 82.134303) (xy 121.957558 82.061402) (xy 122.089952 81.929008) + (xy 122.183486 81.789025) (xy 122.193968 81.773338) (xy 122.193969 81.773334) (xy 122.193972 81.773331) + (xy 122.265623 81.600351) (xy 122.30215 81.416716) (xy 122.30215 81.229484) (xy 122.302149 81.229481) + (xy 122.94115 81.229481) (xy 122.94115 81.416718) (xy 122.977676 81.600349) (xy 123.049327 81.773329) + (xy 123.049331 81.773338) (xy 123.105965 81.858095) (xy 123.153348 81.929008) (xy 123.285742 82.061402) + (xy 123.350104 82.104407) (xy 123.441411 82.165418) (xy 123.441417 82.16542) (xy 123.441419 82.165422) + (xy 123.614399 82.237073) (xy 123.798034 82.2736) (xy 123.798035 82.2736) (xy 123.985265 82.2736) + (xy 123.985266 82.2736) (xy 124.168901 82.237073) (xy 124.341881 82.165422) (xy 124.341884 82.165419) + (xy 124.341888 82.165418) (xy 124.388454 82.134303) (xy 124.497558 82.061402) (xy 124.629952 81.929008) + (xy 124.723486 81.789025) (xy 124.733968 81.773338) (xy 124.733969 81.773334) (xy 124.733972 81.773331) + (xy 124.805623 81.600351) (xy 124.84215 81.416716) (xy 124.84215 81.229484) (xy 124.805623 81.045849) + (xy 124.733972 80.872869) (xy 124.73397 80.872867) (xy 124.733968 80.872861) (xy 124.656983 80.757647) + (xy 124.629952 80.717192) (xy 124.497558 80.584798) (xy 124.443854 80.548914) (xy 124.341888 80.480781) + (xy 124.341879 80.480777) (xy 124.168899 80.409126) (xy 123.985268 80.3726) (xy 123.985266 80.3726) + (xy 123.798034 80.3726) (xy 123.798031 80.3726) (xy 123.6144 80.409126) (xy 123.44142 80.480777) + (xy 123.441411 80.480781) (xy 123.285742 80.584798) (xy 123.285738 80.584801) (xy 123.153351 80.717188) + (xy 123.153348 80.717192) (xy 123.049331 80.872861) (xy 123.049327 80.87287) (xy 122.977676 81.04585) + (xy 122.94115 81.229481) (xy 122.302149 81.229481) (xy 122.265623 81.045849) (xy 122.193972 80.872869) + (xy 122.19397 80.872867) (xy 122.193968 80.872861) (xy 122.116983 80.757647) (xy 122.089952 80.717192) + (xy 121.957558 80.584798) (xy 121.903854 80.548914) (xy 121.801888 80.480781) (xy 121.801879 80.480777) + (xy 121.628899 80.409126) (xy 121.445268 80.3726) (xy 121.445266 80.3726) (xy 121.258034 80.3726) + (xy 121.258031 80.3726) (xy 121.0744 80.409126) (xy 120.90142 80.480777) (xy 120.901411 80.480781) + (xy 120.745742 80.584798) (xy 120.745738 80.584801) (xy 120.613351 80.717188) (xy 120.613348 80.717192) + (xy 120.509331 80.872861) (xy 120.509327 80.87287) (xy 120.437676 81.04585) (xy 120.40115 81.229481) + (xy 119.762149 81.229481) (xy 119.725623 81.045849) (xy 119.653972 80.872869) (xy 119.65397 80.872867) + (xy 119.653968 80.872861) (xy 119.576983 80.757647) (xy 119.549952 80.717192) (xy 119.417558 80.584798) + (xy 119.363854 80.548914) (xy 119.261888 80.480781) (xy 119.261879 80.480777) (xy 119.088899 80.409126) + (xy 118.905268 80.3726) (xy 118.905266 80.3726) (xy 118.718034 80.3726) (xy 118.718031 80.3726) + (xy 118.5344 80.409126) (xy 118.36142 80.480777) (xy 118.361411 80.480781) (xy 118.205742 80.584798) + (xy 118.205738 80.584801) (xy 118.073351 80.717188) (xy 118.073348 80.717192) (xy 117.969331 80.872861) + (xy 117.969327 80.87287) (xy 117.897676 81.04585) (xy 117.86115 81.229481) (xy 117.222149 81.229481) + (xy 117.185623 81.045849) (xy 117.113972 80.872869) (xy 117.11397 80.872867) (xy 117.113968 80.872861) + (xy 117.036983 80.757647) (xy 117.009952 80.717192) (xy 116.877558 80.584798) (xy 116.823854 80.548914) + (xy 116.721888 80.480781) (xy 116.721879 80.480777) (xy 116.548899 80.409126) (xy 116.365268 80.3726) + (xy 116.365266 80.3726) (xy 116.178034 80.3726) (xy 116.178031 80.3726) (xy 115.9944 80.409126) + (xy 115.82142 80.480777) (xy 115.821411 80.480781) (xy 115.665742 80.584798) (xy 115.665738 80.584801) + (xy 115.533351 80.717188) (xy 115.533348 80.717192) (xy 115.429331 80.872861) (xy 115.429327 80.87287) + (xy 115.357676 81.04585) (xy 115.32115 81.229481) (xy 114.224203 81.229481) (xy 114.197575 81.130107) + (xy 114.164662 81.0731) (xy 115.008259 81.0731) (xy 115.008259 81.073099) (xy 114.99964 81.018685) + (xy 114.936406 80.824072) (xy 114.843511 80.641753) (xy 114.723235 80.476208) (xy 114.578541 80.331514) + (xy 114.412996 80.211238) (xy 114.230677 80.118343) (xy 114.036064 80.055109) (xy 113.98165 80.04649) + (xy 113.98165 80.890088) (xy 113.924643 80.857175) (xy 113.797476 80.8231) (xy 113.665824 80.8231) + (xy 113.538657 80.857175) (xy 113.48165 80.890088) (xy 113.48165 80.046491) (xy 113.481649 80.04649) + (xy 113.427235 80.055109) (xy 113.232622 80.118343) (xy 113.050303 80.211238) (xy 112.884758 80.331514) + (xy 112.740064 80.476208) (xy 112.619788 80.641753) (xy 112.526893 80.824072) (xy 112.463659 81.018685) + (xy 112.45504 81.073099) (xy 112.455041 81.0731) (xy 113.298638 81.0731) (xy 113.265725 81.130107) + (xy 113.23165 81.257274) (xy 113.23165 81.388926) (xy 113.265725 81.516093) (xy 113.298638 81.5731) + (xy 112.45504 81.5731) (xy 112.463659 81.627514) (xy 112.526893 81.822127) (xy 112.619788 82.004447) + (xy 112.672363 82.076809) (xy 112.69127 82.135) (xy 112.672363 82.193191) (xy 112.622863 82.229155) + (xy 112.59227 82.234) (xy 111.863934 82.234) (xy 111.805743 82.215093) (xy 111.769779 82.165593) + (xy 111.769779 82.104407) (xy 111.795707 82.066429) (xy 111.794119 82.064841) (xy 111.86136 81.9976) + (xy 111.929952 81.929008) (xy 112.023486 81.789025) (xy 112.033968 81.773338) (xy 112.033969 81.773334) + (xy 112.033972 81.773331) (xy 112.105623 81.600351) (xy 112.14215 81.416716) (xy 112.14215 81.229484) + (xy 112.105623 81.045849) (xy 112.033972 80.872869) (xy 112.03397 80.872867) (xy 112.033968 80.872861) + (xy 111.956983 80.757647) (xy 111.929952 80.717192) (xy 111.797558 80.584798) (xy 111.743854 80.548914) + (xy 111.641888 80.480781) (xy 111.641879 80.480777) (xy 111.468899 80.409126) (xy 111.285268 80.3726) + (xy 111.285266 80.3726) (xy 111.098034 80.3726) (xy 111.098031 80.3726) (xy 110.9144 80.409126) + (xy 110.74142 80.480777) (xy 110.741411 80.480781) (xy 110.585742 80.584798) (xy 110.585738 80.584801) + (xy 110.453351 80.717188) (xy 110.453348 80.717192) (xy 110.349331 80.872861) (xy 110.349327 80.87287) + (xy 110.277676 81.04585) (xy 110.24115 81.229481) (xy 110.24115 81.416718) (xy 110.277676 81.600349) + (xy 110.349327 81.773329) (xy 110.349331 81.773338) (xy 110.405965 81.858095) (xy 110.453348 81.929008) + (xy 110.453351 81.929011) (xy 110.589181 82.064841) (xy 110.587387 82.066634) (xy 110.61515 82.109971) + (xy 110.611569 82.171051) (xy 110.572769 82.218361) (xy 110.519366 82.234) (xy 109.323934 82.234) + (xy 109.265743 82.215093) (xy 109.229779 82.165593) (xy 109.229779 82.104407) (xy 109.255707 82.066429) + (xy 109.254119 82.064841) (xy 109.32136 81.9976) (xy 109.389952 81.929008) (xy 109.483486 81.789025) + (xy 109.493968 81.773338) (xy 109.493969 81.773334) (xy 109.493972 81.773331) (xy 109.565623 81.600351) + (xy 109.60215 81.416716) (xy 109.60215 81.229484) (xy 109.565623 81.045849) (xy 109.493972 80.872869) + (xy 109.49397 80.872867) (xy 109.493968 80.872861) (xy 109.416983 80.757647) (xy 109.389952 80.717192) + (xy 109.257558 80.584798) (xy 109.203854 80.548914) (xy 109.101888 80.480781) (xy 109.101879 80.480777) + (xy 108.928899 80.409126) (xy 108.745268 80.3726) (xy 108.745266 80.3726) (xy 108.558034 80.3726) + (xy 108.558031 80.3726) (xy 108.3744 80.409126) (xy 108.20142 80.480777) (xy 108.201411 80.480781) + (xy 108.045742 80.584798) (xy 108.045738 80.584801) (xy 107.913351 80.717188) (xy 107.913348 80.717192) + (xy 107.809331 80.872861) (xy 107.809327 80.87287) (xy 107.737676 81.04585) (xy 107.70115 81.229481) + (xy 107.70115 81.416718) (xy 107.737676 81.600349) (xy 107.737677 81.600351) (xy 107.767242 81.671728) + (xy 107.787865 81.721514) (xy 107.792666 81.782511) (xy 107.760696 81.83468) (xy 107.704169 81.858095) + (xy 107.696401 81.8584) (xy 107.595141 81.8584) (xy 107.525017 81.877189) (xy 107.480559 81.889102) + (xy 107.377841 81.948407) (xy 107.293957 82.032291) (xy 107.234652 82.135009) (xy 107.226504 82.165418) + (xy 107.20395 82.249591) (xy 107.20395 82.368209) (xy 107.213937 82.405479) (xy 107.234652 82.48279) + (xy 107.27184 82.5472) (xy 107.284562 82.607048) (xy 107.259676 82.662944) (xy 107.206688 82.693537) + (xy 107.186104 82.6957) (xy 104.885658 82.6957) (xy 104.827467 82.676793) (xy 104.815655 82.666704) + (xy 104.420285 82.271335) (xy 104.352992 82.226372) (xy 104.336112 82.215093) (xy 104.272797 82.172787) + (xy 104.272794 82.172785) (xy 104.272793 82.172785) (xy 104.181604 82.135014) (xy 104.108919 82.104906) + (xy 104.108913 82.104904) (xy 103.934944 82.0703) (xy 103.934942 82.0703) (xy 103.934941 82.0703) + (xy 103.701658 82.0703) (xy 103.643467 82.051393) (xy 103.631654 82.041304) (xy 102.921186 81.330836) + (xy 102.91737 81.323348) (xy 102.910617 81.318355) (xy 102.903755 81.296625) (xy 102.893409 81.276319) + (xy 102.894723 81.268022) (xy 102.892193 81.26001) (xy 102.899415 81.238394) (xy 102.900827 81.229481) + (xy 105.16115 81.229481) (xy 105.16115 81.416718) (xy 105.197676 81.600349) (xy 105.269327 81.773329) + (xy 105.269331 81.773338) (xy 105.325965 81.858095) (xy 105.373348 81.929008) (xy 105.505742 82.061402) + (xy 105.570104 82.104407) (xy 105.661411 82.165418) (xy 105.661417 82.16542) (xy 105.661419 82.165422) + (xy 105.834399 82.237073) (xy 106.018034 82.2736) (xy 106.018035 82.2736) (xy 106.205265 82.2736) + (xy 106.205266 82.2736) (xy 106.388901 82.237073) (xy 106.561881 82.165422) (xy 106.561884 82.165419) + (xy 106.561888 82.165418) (xy 106.608454 82.134303) (xy 106.717558 82.061402) (xy 106.849952 81.929008) + (xy 106.943486 81.789025) (xy 106.953968 81.773338) (xy 106.953969 81.773334) (xy 106.953972 81.773331) + (xy 107.025623 81.600351) (xy 107.06215 81.416716) (xy 107.06215 81.229484) (xy 107.025623 81.045849) + (xy 106.953972 80.872869) (xy 106.95397 80.872867) (xy 106.953968 80.872861) (xy 106.876983 80.757647) + (xy 106.849952 80.717192) (xy 106.717558 80.584798) (xy 106.663854 80.548914) (xy 106.561888 80.480781) + (xy 106.561879 80.480777) (xy 106.388899 80.409126) (xy 106.205268 80.3726) (xy 106.205266 80.3726) + (xy 106.018034 80.3726) (xy 106.018031 80.3726) (xy 105.8344 80.409126) (xy 105.66142 80.480777) + (xy 105.661411 80.480781) (xy 105.505742 80.584798) (xy 105.505738 80.584801) (xy 105.373351 80.717188) + (xy 105.373348 80.717192) (xy 105.269331 80.872861) (xy 105.269327 80.87287) (xy 105.197676 81.04585) + (xy 105.16115 81.229481) (xy 102.900827 81.229481) (xy 102.90298 81.215887) (xy 102.90892 81.209946) + (xy 102.911583 81.201978) (xy 102.928225 81.190641) (xy 102.946245 81.172622) (xy 102.961381 81.166427) + (xy 102.963464 81.165769) (xy 103.049936 81.142599) (xy 103.152663 81.083289) (xy 103.236539 80.999413) + (xy 103.239805 80.993756) (xy 103.295847 80.89669) (xy 103.295847 80.896688) (xy 103.295849 80.896686) + (xy 103.32655 80.782109) (xy 103.32655 80.663491) (xy 103.295849 80.548914) (xy 103.295847 80.548911) + (xy 103.295847 80.548909) (xy 103.236542 80.446191) (xy 103.23654 80.446189) (xy 103.236539 80.446187) + (xy 103.152663 80.362311) (xy 103.15266 80.362309) (xy 103.152658 80.362307) (xy 103.049939 80.303002) + (xy 103.04994 80.303002) (xy 103.027085 80.296878) (xy 102.935359 80.2723) (xy 102.816741 80.2723) + (xy 102.746617 80.291089) (xy 102.702159 80.303002) (xy 102.599441 80.362307) (xy 102.59944 80.362308) + (xy 102.599437 80.36231) (xy 102.599437 80.362311) (xy 102.585251 80.376496) (xy 102.530737 80.404272) + (xy 102.470305 80.394701) (xy 102.42704 80.351436) (xy 102.41625 80.306491) (xy 102.41625 77.09141) + (xy 102.416249 77.091406) (xy 102.41295 77.074819) (xy 102.381644 76.917434) (xy 102.313764 76.753555) + (xy 102.313764 76.753554) (xy 102.215214 76.606065) (xy 102.089784 76.480635) (xy 101.942294 76.382085) + (xy 101.778416 76.314206) (xy 101.604443 76.2796) (xy 101.604441 76.2796) (xy 101.427059 76.2796) + (xy 101.427056 76.2796) (xy 101.253084 76.314206) (xy 101.253082 76.314206) (xy 101.089205 76.382085) + (xy 101.089204 76.382085) (xy 100.941715 76.480635) (xy 100.816285 76.606065) (xy 100.717735 76.753554) + (xy 100.717735 76.753555) (xy 100.649856 76.917432) (xy 100.649856 76.917434) (xy 100.61525 77.091406) + (xy 100.61525 81.287594) (xy 100.649854 81.461563) (xy 100.649856 81.461569) (xy 100.650991 81.46431) + (xy 100.680465 81.535464) (xy 100.717737 81.625447) (xy 100.75325 81.678595) (xy 100.756454 81.68339) + (xy 100.805062 81.756139) (xy 100.816286 81.772936) (xy 102.713614 83.670264) (xy 102.77269 83.709736) + (xy 102.861103 83.768813) (xy 102.930905 83.797725) (xy 102.935945 83.80054) (xy 102.953001 83.818946) + (xy 102.972088 83.835247) (xy 102.97348 83.841045) (xy 102.977533 83.845419) (xy 102.980512 83.870338) + (xy 102.986372 83.894742) (xy 102.984129 83.900584) (xy 102.984798 83.906171) (xy 102.975805 83.922273) + (xy 102.969191 83.939508) (xy 102.970505 83.940267) (xy 102.907952 84.048609) (xy 102.896446 84.09155) + (xy 102.87725 84.163191) (xy 102.87725 84.281809) (xy 102.89803 84.359361) (xy 102.907952 84.39639) + (xy 102.967257 84.499108) (xy 102.967259 84.49911) (xy 102.967261 84.499113) (xy 103.051137 84.582989) + (xy 103.051139 84.58299) (xy 103.051141 84.582992) (xy 103.15386 84.642297) (xy 103.153861 84.642297) + (xy 103.153864 84.642299) (xy 103.268441 84.673) (xy 103.268443 84.673) (xy 103.387057 84.673) (xy 103.387059 84.673) + (xy 103.501636 84.642299) (xy 103.501638 84.642297) (xy 103.50164 84.642297) (xy 103.604358 84.582992) + (xy 103.604358 84.582991) (xy 103.604363 84.582989) (xy 103.688239 84.499113) (xy 103.747549 84.396386) + (xy 103.75747 84.359358) (xy 103.757838 84.358791) (xy 103.757812 84.358112) (xy 103.774466 84.333186) + (xy 103.790792 84.308046) (xy 103.791426 84.307802) (xy 103.791804 84.307238) (xy 103.819916 84.296865) + (xy 103.847913 84.286119) (xy 103.848568 84.286294) (xy 103.849208 84.286059) (xy 103.878079 84.294201) + (xy 103.907014 84.301954) (xy 103.908029 84.302622) (xy 103.95669 84.335136) (xy 104.045103 84.394213) + (xy 104.115536 84.423387) (xy 104.208984 84.462095) (xy 104.382958 84.4967) (xy 104.382959 84.4967) + (xy 109.398342 84.4967) (xy 109.456533 84.515607) (xy 109.468346 84.525696) (xy 117.450214 92.507563) + (xy 117.450216 92.507564) (xy 117.450218 92.507566) (xy 117.48407 92.530185) (xy 117.52195 92.578234) + (xy 117.524352 92.639373) (xy 117.490359 92.690246) (xy 117.432956 92.711424) (xy 117.429069 92.7115) + (xy 116.161611 92.7115) (xy 116.10661 92.694816) (xy 116.000676 92.624034) (xy 115.882297 92.575) + (xy 115.882295 92.574999) (xy 115.882294 92.574999) (xy 115.756619 92.55) (xy 111.786981 92.55) + (xy 111.78698 92.55) (xy 111.727162 92.561899) (xy 111.661306 92.574999) (xy 111.661305 92.574999) + (xy 111.661302 92.575) (xy 111.542924 92.624034) (xy 111.542916 92.624038) (xy 111.436382 92.695223) + (xy 108.16907 95.962534) (xy 108.097883 96.069075) (xy 108.048849 96.187454) (xy 108.048849 96.187456) + (xy 108.023851 96.313128) (xy 108.023851 96.313131) (xy 108.023851 96.441269) (xy 108.045339 96.5493) + (xy 108.048849 96.566943) (xy 108.048849 96.566945) (xy 108.097883 96.685324) (xy 108.148289 96.760764) + (xy 108.169073 96.791869) (xy 108.259681 96.882477) (xy 108.366223 96.953665) (xy 108.484606 97.002701) + (xy 108.610281 97.027699) (xy 108.610282 97.027699) (xy 108.738418 97.027699) (xy 108.738419 97.027699) + (xy 108.864094 97.002701) (xy 108.982477 96.953665) (xy 109.089019 96.882477) (xy 112.091499 93.879995) + (xy 112.146016 93.852219) (xy 112.161503 93.851) (xy 113.252128 93.851) (xy 113.310319 93.869907) + (xy 113.346283 93.919407) (xy 113.346283 93.980593) (xy 113.310319 94.030093) (xy 113.301628 94.035736) + (xy 113.242441 94.069907) (xy 113.158557 94.153791) (xy 113.099252 94.256509) (xy 113.094408 94.274587) + (xy 113.06855 94.371091) (xy 113.06855 94.489709) (xy 113.084317 94.548551) (xy 113.099252 94.60429) + (xy 113.158557 94.707008) (xy 113.158559 94.70701) (xy 113.158561 94.707013) (xy 113.242437 94.790889) + (xy 113.242439 94.79089) (xy 113.242441 94.790892) (xy 113.34516 94.850197) (xy 113.345161 94.850197) + (xy 113.345164 94.850199) (xy 113.459741 94.8809) (xy 113.459743 94.8809) (xy 113.578357 94.8809) + (xy 113.578359 94.8809) (xy 113.692936 94.850199) (xy 113.692938 94.850197) (xy 113.69294 94.850197) + (xy 113.795658 94.790892) (xy 113.795658 94.790891) (xy 113.795663 94.790889) (xy 113.879539 94.707013) + (xy 113.888449 94.691581) (xy 113.938847 94.60429) (xy 113.938847 94.604288) (xy 113.938849 94.604286) + (xy 113.96955 94.489709) (xy 113.96955 94.371091) (xy 113.938849 94.256514) (xy 113.938847 94.256511) + (xy 113.938847 94.256509) (xy 113.879542 94.153791) (xy 113.87954 94.153789) (xy 113.879539 94.153787) + (xy 113.795663 94.069911) (xy 113.79566 94.069909) (xy 113.795658 94.069907) (xy 113.736472 94.035736) + (xy 113.695531 93.990267) (xy 113.689135 93.929416) (xy 113.719728 93.876428) (xy 113.775624 93.851542) + (xy 113.785972 93.851) (xy 114.15765 93.851) (xy 114.215841 93.869907) (xy 114.251805 93.919407) + (xy 114.251805 93.980593) (xy 114.243386 93.9995) (xy 114.226752 94.028309) (xy 114.212659 94.080907) + (xy 114.19605 94.142891) (xy 114.19605 94.261509) (xy 114.216399 94.337452) (xy 114.226752 94.37609) + (xy 114.286057 94.478808) (xy 114.286059 94.47881) (xy 114.286061 94.478813) (xy 114.369937 94.562689) + (xy 114.369939 94.56269) (xy 114.369941 94.562692) (xy 114.47266 94.621997) (xy 114.472661 94.621997) + (xy 114.472664 94.621999) (xy 114.587241 94.6527) (xy 114.587243 94.6527) (xy 114.705857 94.6527) + (xy 114.705859 94.6527) (xy 114.820436 94.621999) (xy 114.820438 94.621997) (xy 114.82044 94.621997) + (xy 114.923158 94.562692) (xy 114.923158 94.562691) (xy 114.923163 94.562689) (xy 115.007039 94.478813) + (xy 115.02079 94.454996) (xy 115.066347 94.37609) (xy 115.066347 94.376088) (xy 115.066349 94.376086) + (xy 115.09705 94.261509) (xy 115.09705 94.142891) (xy 115.066349 94.028314) (xy 115.066347 94.028311) + (xy 115.066347 94.028309) (xy 115.049714 93.9995) (xy 115.036992 93.939652) (xy 115.061879 93.883756) + (xy 115.114867 93.853163) (xy 115.13545 93.851) (xy 115.38499 93.851) (xy 115.43999 93.867683) (xy 115.510311 93.91467) + (xy 115.545923 93.938465) (xy 115.664306 93.987501) (xy 115.789981 94.0125) (xy 116.384008 94.0125) + (xy 116.442199 94.031407) (xy 116.478163 94.080907) (xy 116.478163 94.142093) (xy 116.469744 94.161) + (xy 116.411252 94.262309) (xy 116.400163 94.303693) (xy 116.38055 94.376891) (xy 116.38055 94.495509) + (xy 116.401475 94.5736) (xy 116.411252 94.61009) (xy 116.470557 94.712808) (xy 116.470559 94.71281) + (xy 116.470561 94.712813) (xy 116.554437 94.796689) (xy 116.554439 94.79669) (xy 116.554441 94.796692) + (xy 116.65716 94.855997) (xy 116.657161 94.855997) (xy 116.657164 94.855999) (xy 116.771741 94.8867) + (xy 116.771743 94.8867) (xy 116.890357 94.8867) (xy 116.890359 94.8867) (xy 117.004936 94.855999) + (xy 117.004938 94.855997) (xy 117.00494 94.855997) (xy 117.107658 94.796692) (xy 117.107658 94.796691) + (xy 117.107663 94.796689) (xy 117.191539 94.712813) (xy 117.194891 94.707008) (xy 117.250847 94.61009) + (xy 117.250847 94.610088) (xy 117.250849 94.610086) (xy 117.28155 94.495509) (xy 117.28155 94.376891) + (xy 117.250849 94.262314) (xy 117.250847 94.262311) (xy 117.250847 94.262309) (xy 117.192356 94.161) + (xy 117.179634 94.101152) (xy 117.204521 94.045256) (xy 117.257509 94.014663) (xy 117.278092 94.0125) + (xy 122.232027 94.0125) (xy 122.25134 94.014402) (xy 122.26435 94.016989) (xy 122.297581 94.0236) + (xy 122.297587 94.0236) (xy 122.425718 94.0236) (xy 122.425719 94.0236) (xy 122.551394 93.998601) + (xy 122.669777 93.949565) (xy 122.776319 93.878377) (xy 122.866927 93.787769) (xy 122.8809 93.773796) + (xy 122.935417 93.746019) (xy 122.950904 93.7448) (xy 123.556682 93.7448) (xy 123.614873 93.763707) + (xy 123.650837 93.813207) (xy 123.650837 93.874393) (xy 123.626687 93.913801) (xy 123.164403 94.376086) + (xy 122.70692 94.833569) (xy 122.652403 94.861346) (xy 122.636916 94.862565) (xy 118.50115 94.862565) + (xy 118.442959 94.843658) (xy 118.406995 94.794158) (xy 118.40215 94.763565) (xy 118.40215 94.743792) + (xy 118.396551 94.722897) (xy 118.371449 94.629214) (xy 118.371447 94.629211) (xy 118.371447 94.629209) + (xy 118.312142 94.526491) (xy 118.31214 94.526489) (xy 118.312139 94.526487) (xy 118.228263 94.442611) + (xy 118.22826 94.442609) (xy 118.228258 94.442607) (xy 118.125539 94.383302) (xy 118.12554 94.383302) + (xy 118.101617 94.376892) (xy 118.010959 94.3526) (xy 117.892341 94.3526) (xy 117.855734 94.362409) + (xy 117.777759 94.383302) (xy 117.675041 94.442607) (xy 117.591157 94.526491) (xy 117.531852 94.629209) + (xy 117.50115 94.743792) (xy 117.50115 94.85833) (xy 117.482243 94.916521) (xy 117.472154 94.928334) + (xy 112.386885 100.013604) (xy 112.332368 100.041381) (xy 112.316881 100.0426) (xy 111.016418 100.0426) + (xy 110.958227 100.023693) (xy 110.946414 100.013604) (xy 106.321146 95.388335) (xy 106.293369 95.333818) + (xy 106.29215 95.318331) (xy 106.29215 91.853271) (xy 106.254014 91.761203) (xy 106.183547 91.690735) + (xy 106.183547 91.690736) (xy 105.807202 91.314391) (xy 112.60625 91.314391) (xy 112.60625 91.433009) + (xy 112.633324 91.534051) (xy 112.636952 91.54759) (xy 112.696257 91.650308) (xy 112.696259 91.65031) + (xy 112.696261 91.650313) (xy 112.780137 91.734189) (xy 112.780139 91.73419) (xy 112.780141 91.734192) + (xy 112.88286 91.793497) (xy 112.882861 91.793497) (xy 112.882864 91.793499) (xy 112.997441 91.8242) + (xy 112.997443 91.8242) (xy 113.116057 91.8242) (xy 113.116059 91.8242) (xy 113.230636 91.793499) + (xy 113.230638 91.793497) (xy 113.23064 91.793497) (xy 113.333358 91.734192) (xy 113.333358 91.734191) + (xy 113.333363 91.734189) (xy 113.417239 91.650313) (xy 113.436544 91.616876) (xy 113.476547 91.54759) + (xy 113.476547 91.547588) (xy 113.476549 91.547586) (xy 113.50725 91.433009) (xy 113.50725 91.314391) + (xy 113.476549 91.199814) (xy 113.476547 91.199811) (xy 113.476547 91.199809) (xy 113.417242 91.097091) + (xy 113.41724 91.097089) (xy 113.417239 91.097087) (xy 113.333363 91.013211) (xy 113.33336 91.013209) + (xy 113.333358 91.013207) (xy 113.230639 90.953902) (xy 113.23064 90.953902) (xy 113.192166 90.943593) + (xy 113.116059 90.9232) (xy 112.997441 90.9232) (xy 112.927317 90.941989) (xy 112.882859 90.953902) + (xy 112.780141 91.013207) (xy 112.696257 91.097091) (xy 112.636952 91.199809) (xy 112.631806 91.219016) + (xy 112.60625 91.314391) (xy 105.807202 91.314391) (xy 98.761702 84.268891) (xy 99.91065 84.268891) + (xy 99.91065 84.387509) (xy 99.930639 84.462107) (xy 99.941352 84.50209) (xy 100.000657 84.604808) + (xy 100.000659 84.60481) (xy 100.000661 84.604813) (xy 100.084537 84.688689) (xy 100.084539 84.68869) + (xy 100.084541 84.688692) (xy 100.18726 84.747997) (xy 100.187261 84.747997) (xy 100.187264 84.747999) + (xy 100.301841 84.7787) (xy 100.301843 84.7787) (xy 100.420457 84.7787) (xy 100.420459 84.7787) + (xy 100.535036 84.747999) (xy 100.535038 84.747997) (xy 100.53504 84.747997) (xy 100.637758 84.688692) + (xy 100.637758 84.688691) (xy 100.637763 84.688689) (xy 100.721639 84.604813) (xy 100.721642 84.604808) + (xy 100.780947 84.50209) (xy 100.780947 84.502088) (xy 100.780949 84.502086) (xy 100.81165 84.387509) + (xy 100.81165 84.268891) (xy 100.780949 84.154314) (xy 100.780947 84.154311) (xy 100.780947 84.154309) + (xy 100.721642 84.051591) (xy 100.72164 84.051589) (xy 100.721639 84.051587) (xy 100.637763 83.967711) + (xy 100.63776 83.967709) (xy 100.637758 83.967707) (xy 100.535039 83.908402) (xy 100.53504 83.908402) + (xy 100.521501 83.904774) (xy 100.420459 83.8777) (xy 100.301841 83.8777) (xy 100.23824 83.894742) + (xy 100.187259 83.908402) (xy 100.084541 83.967707) (xy 100.000657 84.051591) (xy 99.941352 84.154309) + (xy 99.941351 84.154314) (xy 99.91065 84.268891) (xy 98.761702 84.268891) (xy 97.902433 83.409622) + (xy 97.874656 83.355105) (xy 97.884227 83.294673) (xy 97.927492 83.251408) (xy 97.946803 83.243995) + (xy 98.025536 83.222899) (xy 98.128263 83.163589) (xy 98.212139 83.079713) (xy 98.212142 83.079708) + (xy 98.271447 82.97699) (xy 98.271447 82.976988) (xy 98.271449 82.976986) (xy 98.30215 82.862409) + (xy 98.30215 82.743791) (xy 98.271449 82.629214) (xy 98.271447 82.629211) (xy 98.271447 82.629209) + (xy 98.212142 82.526491) (xy 98.21214 82.526489) (xy 98.212139 82.526487) (xy 98.128263 82.442611) + (xy 98.12826 82.442609) (xy 98.128258 82.442607) (xy 98.025539 82.383302) (xy 98.02554 82.383302) + (xy 98.012001 82.379674) (xy 97.910959 82.3526) (xy 97.792341 82.3526) (xy 97.734088 82.368209) + (xy 97.677759 82.383302) (xy 97.575041 82.442607) (xy 97.491157 82.526491) (xy 97.431852 82.629209) + (xy 97.410758 82.707935) (xy 97.377433 82.75925) (xy 97.320312 82.781176) (xy 97.261211 82.76534) + (xy 97.245127 82.752316) (xy 93.104602 78.611791) (xy 96.18215 78.611791) (xy 96.18215 78.730409) + (xy 96.20728 78.824196) (xy 96.212852 78.84499) (xy 96.272157 78.947708) (xy 96.272159 78.94771) + (xy 96.272161 78.947713) (xy 96.356037 79.031589) (xy 96.356039 79.03159) (xy 96.356041 79.031592) + (xy 96.45876 79.090897) (xy 96.458761 79.090897) (xy 96.458764 79.090899) (xy 96.573341 79.1216) + (xy 96.573343 79.1216) (xy 96.691957 79.1216) (xy 96.691959 79.1216) (xy 96.806536 79.090899) (xy 96.806538 79.090897) + (xy 96.80654 79.090897) (xy 96.909258 79.031592) (xy 96.909258 79.031591) (xy 96.909263 79.031589) + (xy 96.993139 78.947713) (xy 97.052449 78.844986) (xy 97.08315 78.730409) (xy 97.08315 78.611791) + (xy 97.052449 78.497214) (xy 97.052447 78.497211) (xy 97.052447 78.497209) (xy 96.993142 78.394491) + (xy 96.99314 78.394489) (xy 96.993139 78.394487) (xy 96.909263 78.310611) (xy 96.90926 78.310609) + (xy 96.909258 78.310607) (xy 96.806539 78.251302) (xy 96.80654 78.251302) (xy 96.793001 78.247674) + (xy 96.691959 78.2206) (xy 96.573341 78.2206) (xy 96.503217 78.239389) (xy 96.458759 78.251302) + (xy 96.356041 78.310607) (xy 96.272157 78.394491) (xy 96.212852 78.497209) (xy 96.206799 78.5198) + (xy 96.18215 78.611791) (xy 93.104602 78.611791) (xy 92.502802 78.009991) (xy 97.70765 78.009991) + (xy 97.70765 78.128609) (xy 97.732299 78.2206) (xy 97.738352 78.24319) (xy 97.797657 78.345908) + (xy 97.797659 78.34591) (xy 97.797661 78.345913) (xy 97.881537 78.429789) (xy 97.881539 78.42979) + (xy 97.881541 78.429792) (xy 97.98426 78.489097) (xy 97.984261 78.489097) (xy 97.984264 78.489099) + (xy 98.098841 78.5198) (xy 98.098843 78.5198) (xy 98.217457 78.5198) (xy 98.217459 78.5198) (xy 98.332036 78.489099) + (xy 98.332038 78.489097) (xy 98.33204 78.489097) (xy 98.434758 78.429792) (xy 98.434758 78.429791) + (xy 98.434763 78.429789) (xy 98.518639 78.345913) (xy 98.54695 78.296878) (xy 98.577947 78.24319) + (xy 98.577947 78.243188) (xy 98.577949 78.243186) (xy 98.60865 78.128609) (xy 98.60865 78.009991) + (xy 98.577949 77.895414) (xy 98.577947 77.895411) (xy 98.577947 77.895409) (xy 98.518642 77.792691) + (xy 98.51864 77.792689) (xy 98.518639 77.792687) (xy 98.434763 77.708811) (xy 98.43476 77.708809) + (xy 98.434758 77.708807) (xy 98.332039 77.649502) (xy 98.33204 77.649502) (xy 98.318501 77.645874) + (xy 98.217459 77.6188) (xy 98.098841 77.6188) (xy 98.028717 77.637589) (xy 97.984259 77.649502) + (xy 97.881541 77.708807) (xy 97.797657 77.792691) (xy 97.738352 77.895409) (xy 97.738351 77.895414) + (xy 97.70765 78.009991) (xy 92.502802 78.009991) (xy 88.165914 73.673103) (xy 88.138137 73.618586) + (xy 88.147708 73.558154) (xy 88.165914 73.533095) (xy 89.811905 71.887104) (xy 91.483545 70.215464) + (xy 91.483547 70.215464) (xy 91.554014 70.144997) (xy 91.59215 70.052928) (xy 91.59215 67.921057) + (xy 91.611057 67.862866) (xy 91.660557 67.826902) (xy 91.721743 67.826902) (xy 91.771243 67.862866) + (xy 91.776886 67.871557) (xy 91.838057 67.977508) (xy 91.838059 67.97751) (xy 91.838061 67.977513) + (xy 91.921937 68.061389) (xy 91.921939 68.06139) (xy 91.921941 68.061392) (xy 92.02466 68.120697) + (xy 92.024661 68.120697) (xy 92.024664 68.120699) (xy 92.139241 68.1514) (xy 92.139243 68.1514) + (xy 92.257857 68.1514) (xy 92.257859 68.1514) (xy 92.372436 68.120699) (xy 92.372438 68.120697) + (xy 92.37244 68.120697) (xy 92.475158 68.061392) (xy 92.475158 68.061391) (xy 92.475163 68.061389) + (xy 92.556157 67.980394) (xy 92.610672 67.952619) (xy 92.626159 67.9514) (xy 94.605331 67.9514) + (xy 94.663522 67.970307) (xy 94.699486 68.019807) (xy 94.699486 68.080993) (xy 94.675335 68.120404) + (xy 93.975234 68.820504) (xy 93.920717 68.848281) (xy 93.90523 68.8495) (xy 93.790691 68.8495) (xy 93.720567 68.868289) + (xy 93.676109 68.880202) (xy 93.573391 68.939507) (xy 93.489507 69.023391) (xy 93.430202 69.126109) + (xy 93.430201 69.126114) (xy 93.3995 69.240691) (xy 93.3995 69.359309) (xy 93.411606 69.404489) + (xy 93.430202 69.47389) (xy 93.489507 69.576608) (xy 93.489509 69.57661) (xy 93.489511 69.576613) + (xy 93.573387 69.660489) (xy 93.573389 69.66049) (xy 93.573391 69.660492) (xy 93.67611 69.719797) + (xy 93.676111 69.719797) (xy 93.676114 69.719799) (xy 93.790691 69.7505) (xy 93.790693 69.7505) + (xy 93.909307 69.7505) (xy 93.909309 69.7505) (xy 94.023886 69.719799) (xy 94.023888 69.719797) + (xy 94.02389 69.719797) (xy 94.126608 69.660492) (xy 94.126608 69.660491) (xy 94.126613 69.660489) + (xy 94.210489 69.576613) (xy 94.210492 69.576608) (xy 94.269797 69.47389) (xy 94.269797 69.473888) + (xy 94.269799 69.473886) (xy 94.3005 69.359309) (xy 94.3005 69.244768) (xy 94.319407 69.186577) + (xy 94.329496 69.174764) (xy 95.074764 68.429496) (xy 95.129281 68.401719) (xy 95.144768 68.4005) + (xy 109.752679 68.4005) (xy 109.810735 68.376451) (xy 109.844747 68.362364) (xy 121.185245 57.021864) + (xy 121.185247 57.021864) (xy 121.255714 56.951397) (xy 121.29385 56.859328) (xy 121.29385 56.688345) + (xy 121.312757 56.630154) (xy 121.362257 56.59419) (xy 121.423443 56.59419) (xy 121.472943 56.630154) + (xy 121.484314 56.65046) (xy 121.545017 56.797013) (xy 121.572558 56.838231) (xy 121.654511 56.960882) + (xy 121.793868 57.100239) (xy 121.957736 57.209732) (xy 122.139815 57.285151) (xy 122.333109 57.3236) + (xy 122.33311 57.3236) (xy 122.53019 57.3236) (xy 122.530191 57.3236) (xy 122.723485 57.285151) + (xy 122.905564 57.209732) (xy 123.069432 57.100239) (xy 123.208789 56.960882) (xy 123.318282 56.797014) + (xy 123.393701 56.614935) (xy 123.43215 56.421641) (xy 123.43215 56.224559) (xy 123.393701 56.031265) + (xy 123.326473 55.868963) (xy 123.321673 55.807968) (xy 123.347935 55.761075) (xy 123.681815 55.427196) + (xy 123.736331 55.399419) (xy 123.751818 55.3982) (xy 124.242621 55.3982) ) ) (filled_polygon (layer "B.Cu") (pts - (xy 123.976444 55.567107) (xy 124.012408 55.616607) (xy 124.012408 55.677793) (xy 123.998346 55.705388) - (xy 123.990625 55.716015) (xy 123.987653 55.720107) (xy 123.905438 55.881462) (xy 123.849478 56.053693) - (xy 123.82115 56.23255) (xy 123.82115 56.413649) (xy 123.849478 56.592506) (xy 123.905438 56.764737) - (xy 123.934701 56.822169) (xy 123.944272 56.882601) (xy 123.916495 56.937118) (xy 123.895992 56.95285) - (xy 123.824235 56.994279) (xy 123.824234 56.99428) (xy 123.71243 57.106084) (xy 123.633373 57.243016) - (xy 123.59245 57.395743) (xy 123.59245 57.553857) (xy 123.633373 57.706584) (xy 123.71243 57.843516) - (xy 123.824234 57.95532) (xy 123.961166 58.034377) (xy 124.113893 58.0753) (xy 124.113895 58.0753) - (xy 124.272005 58.0753) (xy 124.272007 58.0753) (xy 124.424734 58.034377) (xy 124.561666 57.95532) - (xy 124.67347 57.843516) (xy 124.752527 57.706584) (xy 124.79345 57.553857) (xy 124.79345 57.553855) - (xy 124.795129 57.547589) (xy 124.798061 57.548374) (xy 124.819072 57.504403) (xy 124.872863 57.475245) - (xy 124.890837 57.4736) (xy 125.062199 57.4736) (xy 125.151627 57.459435) (xy 125.241059 57.445271) - (xy 125.413289 57.389311) (xy 125.574644 57.307096) (xy 125.721151 57.200653) (xy 125.849203 57.072601) - (xy 125.955646 56.926094) (xy 126.037861 56.764739) (xy 126.093821 56.592509) (xy 126.107985 56.503077) - (xy 126.12215 56.413649) (xy 126.12215 56.23255) (xy 126.103264 56.113312) (xy 126.093821 56.053691) - (xy 126.037861 55.881461) (xy 125.955646 55.720106) (xy 125.944954 55.70539) (xy 125.926047 55.647202) - (xy 125.944953 55.589011) (xy 125.994453 55.553046) (xy 126.025047 55.5482) (xy 126.458253 55.5482) - (xy 126.516444 55.567107) (xy 126.552408 55.616607) (xy 126.552408 55.677793) (xy 126.538346 55.705388) - (xy 126.530625 55.716015) (xy 126.527653 55.720107) (xy 126.445438 55.881462) (xy 126.389478 56.053693) - (xy 126.36115 56.23255) (xy 126.36115 56.413649) (xy 126.389478 56.592506) (xy 126.445438 56.764737) - (xy 126.522114 56.915223) (xy 126.527654 56.926094) (xy 126.634097 57.072601) (xy 126.762149 57.200653) - (xy 126.908656 57.307096) (xy 127.070011 57.389311) (xy 127.242241 57.445271) (xy 127.313786 57.456602) - (xy 127.421101 57.4736) (xy 127.421104 57.4736) (xy 127.602199 57.4736) (xy 127.691627 57.459435) - (xy 127.781059 57.445271) (xy 127.953289 57.389311) (xy 128.114644 57.307096) (xy 128.261151 57.200653) - (xy 128.389203 57.072601) (xy 128.495646 56.926094) (xy 128.577861 56.764739) (xy 128.633821 56.592509) - (xy 128.647985 56.503077) (xy 128.66215 56.413649) (xy 128.66215 56.23255) (xy 128.643264 56.113312) - (xy 128.633821 56.053691) (xy 128.577861 55.881461) (xy 128.495646 55.720106) (xy 128.484954 55.70539) - (xy 128.466047 55.647202) (xy 128.484953 55.589011) (xy 128.534453 55.553046) (xy 128.565047 55.5482) - (xy 128.998253 55.5482) (xy 129.056444 55.567107) (xy 129.092408 55.616607) (xy 129.092408 55.677793) - (xy 129.078346 55.705388) (xy 129.070625 55.716015) (xy 129.067653 55.720107) (xy 128.985438 55.881462) - (xy 128.929478 56.053693) (xy 128.90115 56.23255) (xy 128.90115 56.413649) (xy 128.929478 56.592506) - (xy 128.980959 56.750951) (xy 128.980958 56.812136) (xy 128.956808 56.851547) (xy 115.825253 69.983104) - (xy 115.770736 70.010881) (xy 115.755249 70.0121) (xy 94.727994 70.0121) (xy 94.669803 69.993193) - (xy 94.657991 69.983104) (xy 94.606968 69.932082) (xy 94.606966 69.93208) (xy 94.470034 69.853023) - (xy 94.317307 69.8121) (xy 94.159193 69.8121) (xy 94.006466 69.853023) (xy 93.869534 69.93208) (xy 93.75773 70.043884) - (xy 93.678673 70.180816) (xy 93.63775 70.333543) (xy 93.63775 70.491657) (xy 93.678673 70.644384) - (xy 93.75773 70.781316) (xy 93.869534 70.89312) (xy 94.006466 70.972177) (xy 94.159193 71.0131) - (xy 94.159195 71.0131) (xy 94.317305 71.0131) (xy 94.317307 71.0131) (xy 94.470034 70.972177) (xy 94.606966 70.89312) - (xy 94.632479 70.867606) (xy 94.657991 70.842096) (xy 94.712508 70.814319) (xy 94.727994 70.8131) - (xy 103.688832 70.8131) (xy 103.747023 70.832007) (xy 103.782987 70.881507) (xy 103.784458 70.93772) - (xy 103.74485 71.085543) (xy 103.74485 71.243657) (xy 103.785773 71.396384) (xy 103.86483 71.533316) - (xy 103.928612 71.597098) (xy 103.956388 71.651613) (xy 103.946817 71.712045) (xy 103.903552 71.75531) - (xy 103.858607 71.7661) (xy 96.970794 71.7661) (xy 96.912603 71.747193) (xy 96.900791 71.737104) - (xy 96.849768 71.686082) (xy 96.849766 71.68608) (xy 96.712834 71.607023) (xy 96.560107 71.5661) - (xy 96.401993 71.5661) (xy 96.249266 71.607023) (xy 96.112334 71.68608) (xy 96.00053 71.797884) - (xy 95.921473 71.934816) (xy 95.88055 72.087543) (xy 95.88055 72.245657) (xy 95.921473 72.398384) - (xy 96.00053 72.535316) (xy 96.112334 72.64712) (xy 96.249266 72.726177) (xy 96.401993 72.7671) - (xy 96.401995 72.7671) (xy 96.560105 72.7671) (xy 96.560107 72.7671) (xy 96.712834 72.726177) (xy 96.849766 72.64712) - (xy 96.875279 72.621606) (xy 96.900791 72.596096) (xy 96.955308 72.568319) (xy 96.970794 72.5671) - (xy 110.462249 72.5671) (xy 110.52044 72.586007) (xy 110.556404 72.635507) (xy 110.556404 72.696693) - (xy 110.532252 72.736104) (xy 110.260097 73.008258) (xy 110.205581 73.036035) (xy 110.159502 73.032409) - (xy 110.001056 72.980928) (xy 109.822199 72.9526) (xy 109.822196 72.9526) (xy 109.641104 72.9526) - (xy 109.641101 72.9526) (xy 109.462243 72.980928) (xy 109.290012 73.036888) (xy 109.128658 73.119102) - (xy 109.055402 73.172325) (xy 108.982149 73.225547) (xy 108.854097 73.353599) (xy 108.823625 73.39554) - (xy 108.747652 73.500108) (xy 108.665438 73.661462) (xy 108.609478 73.833693) (xy 108.58115 74.01255) - (xy 108.58115 74.193649) (xy 108.609478 74.372506) (xy 108.665438 74.544737) (xy 108.747653 74.706093) - (xy 108.747656 74.706097) (xy 108.763213 74.72751) (xy 108.78212 74.785701) (xy 108.763212 74.843891) - (xy 108.713712 74.879855) (xy 108.68312 74.8847) (xy 108.44115 74.8847) (xy 108.382959 74.865793) - (xy 108.346995 74.816293) (xy 108.34215 74.7857) (xy 108.342149 73.208239) (xy 108.342149 73.208236) - (xy 108.339235 73.183109) (xy 108.293856 73.080335) (xy 108.214415 73.000894) (xy 108.111641 72.955515) - (xy 108.11164 72.955514) (xy 108.111638 72.955514) (xy 108.086518 72.9526) (xy 106.296789 72.9526) - (xy 106.296786 72.952601) (xy 106.271659 72.955514) (xy 106.168885 73.000894) (xy 106.089444 73.080335) - (xy 106.044064 73.183111) (xy 106.04115 73.20823) (xy 106.04115 74.279399) (xy 106.022243 74.33759) - (xy 105.972743 74.373554) (xy 105.911557 74.373554) (xy 105.872146 74.349403) (xy 105.600852 74.078109) - (xy 105.315563 73.79282) (xy 105.31556 73.792818) (xy 105.315559 73.792817) (xy 105.315558 73.792816) - (xy 105.224241 73.740094) (xy 105.224243 73.740094) (xy 105.170096 73.725586) (xy 105.122377 73.7128) - (xy 105.122375 73.7128) (xy 98.572394 73.7128) (xy 98.514203 73.693893) (xy 98.502391 73.683804) - (xy 98.451368 73.632782) (xy 98.451366 73.63278) (xy 98.314434 73.553723) (xy 98.161707 73.5128) - (xy 98.003593 73.5128) (xy 97.850866 73.553723) (xy 97.713934 73.63278) (xy 97.60213 73.744584) - (xy 97.523073 73.881516) (xy 97.48215 74.034243) (xy 97.48215 74.192357) (xy 97.523073 74.345084) - (xy 97.60213 74.482016) (xy 97.713934 74.59382) (xy 97.850866 74.672877) (xy 98.003593 74.7138) - (xy 98.003595 74.7138) (xy 98.161705 74.7138) (xy 98.161707 74.7138) (xy 98.314434 74.672877) (xy 98.451366 74.59382) - (xy 98.476879 74.568306) (xy 98.502391 74.542796) (xy 98.556908 74.515019) (xy 98.572394 74.5138) - (xy 104.862749 74.5138) (xy 104.92094 74.532707) (xy 104.932753 74.542796) (xy 105.530853 75.140896) - (xy 105.55863 75.195413) (xy 105.549059 75.255845) (xy 105.505794 75.29911) (xy 105.460849 75.3099) - (xy 102.625532 75.3099) (xy 102.567341 75.290993) (xy 102.541297 75.257966) (xy 102.539271 75.259136) - (xy 102.536027 75.253518) (xy 102.536027 75.253516) (xy 102.45697 75.116584) (xy 102.345166 75.00478) - (xy 102.208234 74.925723) (xy 102.055507 74.8848) (xy 101.897393 74.8848) (xy 101.744666 74.925723) - (xy 101.607734 75.00478) (xy 101.49593 75.116584) (xy 101.416873 75.253516) (xy 101.37595 75.406243) - (xy 101.37595 75.564357) (xy 101.416873 75.717084) (xy 101.49593 75.854016) (xy 101.602512 75.960598) - (xy 101.630288 76.015113) (xy 101.620717 76.075545) (xy 101.577452 76.11881) (xy 101.532507 76.1296) - (xy 101.412282 76.1296) (xy 101.209331 76.169969) (xy 101.018152 76.249158) (xy 100.846098 76.36412) - (xy 100.69977 76.510448) (xy 100.584808 76.682502) (xy 100.505619 76.873681) (xy 100.46525 77.076632) - (xy 100.46525 81.302367) (xy 100.505619 81.505318) (xy 100.584808 81.696497) (xy 100.646633 81.789025) - (xy 100.699773 81.868555) (xy 100.846095 82.014877) (xy 100.846098 82.014879) (xy 102.47167 83.640451) - (xy 102.471673 83.640455) (xy 102.617995 83.786777) (xy 102.709143 83.84768) (xy 102.734236 83.864446) - (xy 102.772116 83.912496) (xy 102.774518 83.973634) (xy 102.769977 83.984442) (xy 102.770656 83.984723) - (xy 102.768175 83.990712) (xy 102.768173 83.990716) (xy 102.72725 84.143443) (xy 102.72725 84.301557) - (xy 102.768173 84.454284) (xy 102.84723 84.591216) (xy 102.959034 84.70302) (xy 103.095966 84.782077) - (xy 103.248693 84.823) (xy 103.248695 84.823) (xy 103.406805 84.823) (xy 103.406807 84.823) (xy 103.559534 84.782077) - (xy 103.696466 84.70302) (xy 103.80827 84.591216) (xy 103.828266 84.556581) (xy 103.873732 84.515642) - (xy 103.934582 84.509245) (xy 103.969004 84.523768) (xy 103.974052 84.527141) (xy 104.16523 84.60633) - (xy 104.368185 84.6467) (xy 109.336211 84.6467) (xy 109.394402 84.665607) (xy 109.406215 84.675696) - (xy 117.123015 92.392496) (xy 117.150792 92.447013) (xy 117.141221 92.507445) (xy 117.097956 92.55071) - (xy 117.053011 92.5615) (xy 116.207112 92.5615) (xy 116.15211 92.544815) (xy 116.071735 92.491109) - (xy 116.071724 92.491103) (xy 115.926047 92.430763) (xy 115.771394 92.4) (xy 115.771392 92.4) (xy 111.929892 92.4) - (xy 111.772207 92.4) (xy 111.772204 92.4) (xy 111.669193 92.42049) (xy 111.669193 92.420491) (xy 111.660622 92.422196) - (xy 111.617551 92.430763) (xy 111.471874 92.491104) (xy 111.389591 92.546084) (xy 111.340764 92.578708) - (xy 108.052564 95.866907) (xy 108.052561 95.866911) (xy 107.964959 95.998014) (xy 107.964953 95.998025) - (xy 107.904613 96.143701) (xy 107.904613 96.143703) (xy 107.87385 96.298355) (xy 107.87385 96.456045) - (xy 107.877933 96.47657) (xy 107.870741 96.537332) (xy 107.829208 96.582261) (xy 107.769198 96.594198) - (xy 107.713633 96.568582) (xy 107.710831 96.565888) (xy 106.471146 95.326203) (xy 106.443369 95.271686) - (xy 106.44215 95.256199) (xy 106.44215 91.850374) (xy 106.44215 91.850373) (xy 106.435137 91.8242) - (xy 106.414857 91.748512) (xy 106.414854 91.748506) (xy 106.362133 91.657191) (xy 106.362131 91.657189) - (xy 106.36213 91.657187) (xy 105.999586 91.294643) (xy 112.45625 91.294643) (xy 112.45625 91.452757) - (xy 112.497173 91.605484) (xy 112.57623 91.742416) (xy 112.688034 91.85422) (xy 112.824966 91.933277) - (xy 112.977693 91.9742) (xy 112.977695 91.9742) (xy 113.135805 91.9742) (xy 113.135807 91.9742) - (xy 113.288534 91.933277) (xy 113.425466 91.85422) (xy 113.53727 91.742416) (xy 113.616327 91.605484) - (xy 113.65725 91.452757) (xy 113.65725 91.294643) (xy 113.616327 91.141916) (xy 113.53727 91.004984) - (xy 113.425466 90.89318) (xy 113.288534 90.814123) (xy 113.135807 90.7732) (xy 112.977693 90.7732) - (xy 112.824966 90.814123) (xy 112.688034 90.89318) (xy 112.57623 91.004984) (xy 112.497173 91.141916) - (xy 112.45625 91.294643) (xy 105.999586 91.294643) (xy 98.954086 84.249143) (xy 99.76065 84.249143) - (xy 99.76065 84.407257) (xy 99.801573 84.559984) (xy 99.88063 84.696916) (xy 99.992434 84.80872) - (xy 100.129366 84.887777) (xy 100.282093 84.9287) (xy 100.282095 84.9287) (xy 100.440205 84.9287) - (xy 100.440207 84.9287) (xy 100.592934 84.887777) (xy 100.729866 84.80872) (xy 100.84167 84.696916) - (xy 100.920727 84.559984) (xy 100.96165 84.407257) (xy 100.96165 84.249143) (xy 100.920727 84.096416) - (xy 100.84167 83.959484) (xy 100.729866 83.84768) (xy 100.592934 83.768623) (xy 100.440207 83.7277) - (xy 100.282093 83.7277) (xy 100.129366 83.768623) (xy 99.992434 83.84768) (xy 99.88063 83.959484) - (xy 99.801573 84.096416) (xy 99.76065 84.249143) (xy 98.954086 84.249143) (xy 98.164638 83.459695) - (xy 98.136861 83.405178) (xy 98.146432 83.344746) (xy 98.185141 83.303956) (xy 98.220366 83.28362) - (xy 98.33217 83.171816) (xy 98.411227 83.034884) (xy 98.45215 82.882157) (xy 98.45215 82.724043) - (xy 98.411227 82.571316) (xy 98.33217 82.434384) (xy 98.220366 82.32258) (xy 98.083434 82.243523) - (xy 97.930707 82.2026) (xy 97.772593 82.2026) (xy 97.619866 82.243523) (xy 97.482934 82.32258) (xy 97.37113 82.434384) - (xy 97.350793 82.469608) (xy 97.305325 82.510548) (xy 97.244475 82.516944) (xy 97.195054 82.490111) - (xy 93.296986 78.592043) (xy 96.03215 78.592043) (xy 96.03215 78.750157) (xy 96.073073 78.902884) - (xy 96.15213 79.039816) (xy 96.263934 79.15162) (xy 96.400866 79.230677) (xy 96.553593 79.2716) - (xy 96.553595 79.2716) (xy 96.711705 79.2716) (xy 96.711707 79.2716) (xy 96.864434 79.230677) (xy 97.001366 79.15162) - (xy 97.11317 79.039816) (xy 97.192227 78.902884) (xy 97.23315 78.750157) (xy 97.23315 78.592043) - (xy 97.192227 78.439316) (xy 97.11317 78.302384) (xy 97.001366 78.19058) (xy 96.864434 78.111523) - (xy 96.711707 78.0706) (xy 96.553593 78.0706) (xy 96.400866 78.111523) (xy 96.263934 78.19058) (xy 96.15213 78.302384) - (xy 96.073073 78.439316) (xy 96.03215 78.592043) (xy 93.296986 78.592043) (xy 92.695186 77.990243) - (xy 97.55765 77.990243) (xy 97.55765 78.148357) (xy 97.598573 78.301084) (xy 97.67763 78.438016) - (xy 97.789434 78.54982) (xy 97.926366 78.628877) (xy 98.079093 78.6698) (xy 98.079095 78.6698) (xy 98.237205 78.6698) - (xy 98.237207 78.6698) (xy 98.389934 78.628877) (xy 98.526866 78.54982) (xy 98.63867 78.438016) - (xy 98.717727 78.301084) (xy 98.75865 78.148357) (xy 98.75865 77.990243) (xy 98.717727 77.837516) - (xy 98.63867 77.700584) (xy 98.526866 77.58878) (xy 98.389934 77.509723) (xy 98.237207 77.4688) - (xy 98.079093 77.4688) (xy 97.926366 77.509723) (xy 97.789434 77.58878) (xy 97.67763 77.700584) - (xy 97.598573 77.837516) (xy 97.55765 77.990243) (xy 92.695186 77.990243) (xy 88.378046 73.673103) - (xy 88.350269 73.618586) (xy 88.35984 73.558154) (xy 88.37804 73.533102) (xy 91.66213 70.249013) - (xy 91.714857 70.157688) (xy 91.74215 70.055827) (xy 91.74215 69.950373) (xy 91.74215 68.302268) - (xy 91.761057 68.244077) (xy 91.810557 68.208113) (xy 91.871743 68.208113) (xy 91.890643 68.216528) - (xy 91.966766 68.260477) (xy 92.119493 68.3014) (xy 92.119495 68.3014) (xy 92.261819 68.3014) (xy 92.32001 68.320307) - (xy 92.355974 68.369807) (xy 92.357445 68.426021) (xy 92.32885 68.532743) (xy 92.32885 68.690857) - (xy 92.369773 68.843584) (xy 92.44883 68.980516) (xy 92.560634 69.09232) (xy 92.697566 69.171377) - (xy 92.850293 69.2123) (xy 92.850295 69.2123) (xy 93.008405 69.2123) (xy 93.008407 69.2123) (xy 93.161134 69.171377) - (xy 93.298066 69.09232) (xy 93.323579 69.066806) (xy 93.349091 69.041296) (xy 93.403608 69.013519) - (xy 93.419094 69.0123) (xy 109.293775 69.0123) (xy 109.293777 69.0123) (xy 109.395638 68.985007) - (xy 109.39564 68.985005) (xy 109.395642 68.985005) (xy 109.486958 68.932283) (xy 109.486958 68.932282) - (xy 109.486963 68.93228) (xy 121.28926 57.129981) (xy 121.289263 57.12998) (xy 121.36383 57.055413) - (xy 121.372049 57.041175) (xy 121.37988 57.032834) (xy 121.397146 57.023336) (xy 121.411791 57.01015) - (xy 121.423327 57.008936) (xy 121.43349 57.003347) (xy 121.453039 57.005812) (xy 121.472641 57.003751) - (xy 121.482687 57.00955) (xy 121.494195 57.011002) (xy 121.508563 57.024489) (xy 121.52563 57.034342) - (xy 121.532146 57.042387) (xy 121.554097 57.072601) (xy 121.682149 57.200653) (xy 121.828656 57.307096) - (xy 121.990011 57.389311) (xy 122.162241 57.445271) (xy 122.233786 57.456602) (xy 122.341101 57.4736) - (xy 122.341104 57.4736) (xy 122.522199 57.4736) (xy 122.611627 57.459435) (xy 122.701059 57.445271) - (xy 122.873289 57.389311) (xy 123.034644 57.307096) (xy 123.181151 57.200653) (xy 123.309203 57.072601) - (xy 123.415646 56.926094) (xy 123.497861 56.764739) (xy 123.553821 56.592509) (xy 123.567985 56.503077) - (xy 123.58215 56.413649) (xy 123.58215 56.23255) (xy 123.553822 56.053695) (xy 123.550022 56.042) - (xy 123.502339 55.895243) (xy 123.502339 55.83406) (xy 123.526489 55.794652) (xy 123.743946 55.577196) - (xy 123.751062 55.57357) (xy 123.755758 55.567107) (xy 123.777807 55.559942) (xy 123.798462 55.549419) - (xy 123.813949 55.5482) (xy 123.918253 55.5482) + (xy 127.076641 94.916107) (xy 127.112605 94.965607) (xy 127.112605 95.026793) (xy 127.104186 95.0457) + (xy 127.087552 95.074509) (xy 127.070387 95.138569) (xy 127.05685 95.189091) (xy 127.05685 95.307709) + (xy 127.087136 95.420736) (xy 127.087552 95.422288) (xy 127.104244 95.451199) (xy 127.116966 95.511048) + (xy 127.09208 95.566943) (xy 127.039092 95.597536) (xy 127.018508 95.5997) (xy 126.792221 95.5997) + (xy 126.700153 95.637835) (xy 126.629685 95.708302) (xy 126.629686 95.708303) (xy 126.069085 96.268904) + (xy 126.014568 96.296681) (xy 125.999081 96.2979) (xy 125.312698 96.2979) (xy 125.254507 96.278993) + (xy 125.218543 96.229493) (xy 125.218543 96.168307) (xy 125.226962 96.1494) (xy 125.251447 96.10699) + (xy 125.251447 96.106988) (xy 125.251449 96.106986) (xy 125.28215 95.992409) (xy 125.28215 95.9754) + (xy 125.301057 95.917209) (xy 125.350557 95.881245) (xy 125.38115 95.8764) (xy 125.414579 95.8764) + (xy 125.472635 95.852351) (xy 125.506647 95.838264) (xy 126.418714 94.926195) (xy 126.473231 94.898419) + (xy 126.488718 94.8972) (xy 127.01845 94.8972) ) ) (filled_polygon (layer "B.Cu") (pts - (xy 150.941741 76.348707) (xy 150.977705 76.398207) (xy 150.977705 76.459393) (xy 150.953554 76.498804) - (xy 150.949739 76.502618) (xy 150.949737 76.50262) (xy 150.228757 77.2236) (xy 146.7688 80.683555) - (xy 146.714283 80.711332) (xy 146.653851 80.701761) (xy 146.618704 80.671743) (xy 146.571064 80.606172) - (xy 146.448578 80.483686) (xy 146.308438 80.381868) (xy 146.308437 80.381867) (xy 146.308435 80.381866) - (xy 146.154091 80.303225) (xy 146.154088 80.303223) (xy 145.989356 80.249698) (xy 145.989352 80.249697) - (xy 145.818264 80.2226) (xy 145.818261 80.2226) (xy 145.645039 80.2226) (xy 145.645036 80.2226) - (xy 145.473947 80.249697) (xy 145.473943 80.249698) (xy 145.309211 80.303223) (xy 145.309208 80.303225) - (xy 145.154864 80.381866) (xy 145.014723 80.483685) (xy 144.892235 80.606173) (xy 144.790416 80.746314) - (xy 144.711775 80.900658) (xy 144.711773 80.900661) (xy 144.658248 81.065393) (xy 144.658247 81.065397) - (xy 144.63115 81.236485) (xy 144.63115 81.409714) (xy 144.658247 81.580802) (xy 144.658248 81.580806) - (xy 144.711773 81.745538) (xy 144.711775 81.745541) (xy 144.789222 81.897542) (xy 144.790418 81.899888) - (xy 144.892236 82.040028) (xy 145.014722 82.162514) (xy 145.154862 82.264332) (xy 145.309205 82.342973) - (xy 145.309207 82.342973) (xy 145.309208 82.342974) (xy 145.309211 82.342976) (xy 145.473943 82.396501) - (xy 145.473947 82.396502) (xy 145.645036 82.4236) (xy 145.645039 82.4236) (xy 145.818264 82.4236) - (xy 145.989352 82.396502) (xy 145.989356 82.396501) (xy 146.154088 82.342976) (xy 146.15409 82.342974) - (xy 146.154095 82.342973) (xy 146.308438 82.264332) (xy 146.448578 82.162514) (xy 146.571064 82.040028) - (xy 146.672882 81.899888) (xy 146.735162 81.777654) (xy 146.778426 81.734391) (xy 146.823372 81.7236) - (xy 146.886075 81.7236) (xy 146.886077 81.7236) (xy 146.987937 81.696307) (xy 147.079263 81.64358) - (xy 147.079267 81.643575) (xy 147.079691 81.643251) (xy 147.080058 81.64312) (xy 147.084882 81.640336) - (xy 147.085397 81.641229) (xy 147.137365 81.622823) (xy 147.196032 81.640197) (xy 147.233282 81.688736) - (xy 147.234113 81.691182) (xy 147.23584 81.696497) (xy 147.251777 81.745545) (xy 147.329222 81.897542) - (xy 147.330418 81.899888) (xy 147.432236 82.040028) (xy 147.554722 82.162514) (xy 147.694862 82.264332) - (xy 147.849205 82.342973) (xy 147.849207 82.342973) (xy 147.849208 82.342974) (xy 147.849211 82.342976) - (xy 148.013943 82.396501) (xy 148.013947 82.396502) (xy 148.185036 82.4236) (xy 148.185039 82.4236) - (xy 148.358264 82.4236) (xy 148.529352 82.396502) (xy 148.529356 82.396501) (xy 148.694088 82.342976) - (xy 148.69409 82.342974) (xy 148.694095 82.342973) (xy 148.848438 82.264332) (xy 148.988578 82.162514) - (xy 149.111064 82.040028) (xy 149.212882 81.899888) (xy 149.291523 81.745545) (xy 149.291524 81.74554) - (xy 149.291526 81.745538) (xy 149.345051 81.580806) (xy 149.345052 81.580802) (xy 149.37215 81.409714) - (xy 149.37215 81.236485) (xy 149.345052 81.065397) (xy 149.345051 81.065393) (xy 149.291526 80.900661) - (xy 149.291524 80.900658) (xy 149.291523 80.900657) (xy 149.291523 80.900655) (xy 149.212882 80.746312) - (xy 149.111064 80.606172) (xy 148.988578 80.483686) (xy 148.848438 80.381868) (xy 148.848437 80.381867) - (xy 148.848435 80.381866) (xy 148.694091 80.303225) (xy 148.694088 80.303223) (xy 148.536644 80.252066) - (xy 148.487144 80.216102) (xy 148.468237 80.157911) (xy 148.487145 80.099721) (xy 148.497226 80.087915) - (xy 151.332547 77.252596) (xy 151.387064 77.224819) (xy 151.402551 77.2236) (xy 162.857907 77.2236) - (xy 162.916098 77.242507) (xy 162.952062 77.292007) (xy 162.952062 77.353193) (xy 162.927912 77.392601) - (xy 162.85283 77.467684) (xy 162.773773 77.604616) (xy 162.73285 77.757343) (xy 162.73285 77.915457) - (xy 162.773773 78.068184) (xy 162.85283 78.205116) (xy 162.964634 78.31692) (xy 163.101566 78.395977) - (xy 163.254293 78.4369) (xy 163.254295 78.4369) (xy 163.412405 78.4369) (xy 163.412407 78.4369) - (xy 163.565134 78.395977) (xy 163.702066 78.31692) (xy 163.738334 78.280652) (xy 163.753091 78.265896) - (xy 163.807608 78.238119) (xy 163.823094 78.2369) (xy 166.686927 78.2369) (xy 166.745118 78.255807) - (xy 166.781082 78.305307) (xy 166.781082 78.366493) (xy 166.745118 78.415993) (xy 166.712552 78.431525) - (xy 166.566266 78.470723) (xy 166.429334 78.54978) (xy 166.31753 78.661584) (xy 166.238473 78.798516) - (xy 166.19755 78.951243) (xy 166.19755 79.109357) (xy 166.238473 79.262084) (xy 166.31753 79.399016) - (xy 166.429334 79.51082) (xy 166.566266 79.589877) (xy 166.718993 79.6308) (xy 166.718995 79.6308) - (xy 166.877105 79.6308) (xy 166.877107 79.6308) (xy 167.029834 79.589877) (xy 167.166766 79.51082) - (xy 167.27857 79.399016) (xy 167.357627 79.262084) (xy 167.39855 79.109357) (xy 167.39855 78.951243) - (xy 167.357627 78.798516) (xy 167.27857 78.661584) (xy 167.166766 78.54978) (xy 167.029834 78.470723) - (xy 166.883548 78.431525) (xy 166.832236 78.398203) (xy 166.810309 78.341081) (xy 166.826145 78.281981) - (xy 166.873694 78.243476) (xy 166.909173 78.2369) (xy 172.998049 78.2369) (xy 173.05624 78.255807) - (xy 173.068053 78.265896) (xy 173.232367 78.43021) (xy 173.260144 78.484727) (xy 173.254349 78.533689) - (xy 173.25505 78.533902) (xy 173.25386 78.537824) (xy 173.253828 78.538097) (xy 173.253639 78.538551) - (xy 173.253638 78.538555) (xy 173.21615 78.727019) (xy 173.21615 78.91918) (xy 173.229987 78.98874) - (xy 173.248175 79.080181) (xy 173.253638 79.107642) (xy 173.253638 79.107644) (xy 173.327171 79.28517) - (xy 173.327171 79.285171) (xy 173.433929 79.444944) (xy 173.569805 79.58082) (xy 173.729577 79.687577) - (xy 173.835945 79.731636) (xy 173.88247 79.771373) (xy 173.896754 79.830867) (xy 173.873339 79.887395) - (xy 173.835945 79.914564) (xy 173.729577 79.958622) (xy 173.569805 80.065379) (xy 173.433929 80.201255) - (xy 173.327171 80.361028) (xy 173.327171 80.361029) (xy 173.253638 80.538555) (xy 173.253638 80.538557) - (xy 173.21615 80.727019) (xy 173.21615 80.91918) (xy 173.241142 81.044821) (xy 173.245359 81.066024) - (xy 173.253638 81.107642) (xy 173.253638 81.107644) (xy 173.327171 81.28517) (xy 173.327171 81.285171) - (xy 173.433929 81.444944) (xy 173.569805 81.58082) (xy 173.729577 81.687577) (xy 173.835945 81.731636) - (xy 173.88247 81.771373) (xy 173.896754 81.830867) (xy 173.873339 81.887395) (xy 173.835945 81.914564) - (xy 173.729577 81.958622) (xy 173.569805 82.065379) (xy 173.433929 82.201255) (xy 173.327171 82.361028) - (xy 173.327171 82.361029) (xy 173.253638 82.538555) (xy 173.253638 82.538557) (xy 173.21615 82.727019) - (xy 173.21615 82.91918) (xy 173.253638 83.107642) (xy 173.253638 83.107644) (xy 173.327171 83.28517) - (xy 173.327171 83.285171) (xy 173.433929 83.444944) (xy 173.569805 83.58082) (xy 173.729577 83.687577) - (xy 173.835945 83.731636) (xy 173.88247 83.771373) (xy 173.896754 83.830867) (xy 173.873339 83.887395) - (xy 173.835945 83.914564) (xy 173.729577 83.958622) (xy 173.569805 84.065379) (xy 173.433929 84.201255) - (xy 173.327171 84.361028) (xy 173.327171 84.361029) (xy 173.253638 84.538555) (xy 173.253638 84.538557) - (xy 173.21615 84.727019) (xy 173.21615 84.91918) (xy 173.253638 85.107642) (xy 173.253638 85.107644) - (xy 173.327171 85.28517) (xy 173.327171 85.285171) (xy 173.433929 85.444944) (xy 173.569805 85.58082) - (xy 173.729577 85.687577) (xy 173.835945 85.731636) (xy 173.88247 85.771373) (xy 173.896754 85.830867) - (xy 173.873339 85.887395) (xy 173.835945 85.914564) (xy 173.729577 85.958622) (xy 173.569805 86.065379) - (xy 173.433929 86.201255) (xy 173.327171 86.361028) (xy 173.327171 86.361029) (xy 173.253638 86.538555) - (xy 173.253638 86.538557) (xy 173.21615 86.727019) (xy 173.21615 86.91918) (xy 173.253638 87.107642) - (xy 173.253638 87.107644) (xy 173.327397 87.285715) (xy 173.332198 87.346711) (xy 173.300228 87.39888) - (xy 173.2437 87.422295) (xy 173.235933 87.4226) (xy 158.620251 87.4226) (xy 158.56206 87.403693) - (xy 158.550247 87.393604) (xy 155.357898 84.201255) (xy 152.159263 81.00262) (xy 152.15926 81.002618) - (xy 152.159259 81.002617) (xy 152.159258 81.002616) (xy 152.067941 80.949894) (xy 152.067943 80.949894) - (xy 152.02842 80.939304) (xy 151.966077 80.9226) (xy 151.966075 80.9226) (xy 151.903372 80.9226) - (xy 151.845181 80.903693) (xy 151.815162 80.868545) (xy 151.810554 80.859502) (xy 151.761616 80.763453) - (xy 151.752883 80.746313) (xy 151.707286 80.683555) (xy 151.651064 80.606172) (xy 151.528578 80.483686) - (xy 151.388438 80.381868) (xy 151.388437 80.381867) (xy 151.388435 80.381866) (xy 151.234091 80.303225) - (xy 151.234088 80.303223) (xy 151.069356 80.249698) (xy 151.069352 80.249697) (xy 150.898264 80.2226) - (xy 150.898261 80.2226) (xy 150.725039 80.2226) (xy 150.725036 80.2226) (xy 150.553947 80.249697) - (xy 150.553943 80.249698) (xy 150.389211 80.303223) (xy 150.389208 80.303225) (xy 150.234864 80.381866) - (xy 150.094723 80.483685) (xy 149.972235 80.606173) (xy 149.870416 80.746314) (xy 149.791775 80.900658) - (xy 149.791773 80.900661) (xy 149.738248 81.065393) (xy 149.738247 81.065397) (xy 149.71115 81.236485) - (xy 149.71115 81.409714) (xy 149.738247 81.580802) (xy 149.738248 81.580806) (xy 149.791773 81.745538) - (xy 149.791775 81.745541) (xy 149.869222 81.897542) (xy 149.870418 81.899888) (xy 149.972236 82.040028) - (xy 150.094722 82.162514) (xy 150.234862 82.264332) (xy 150.389205 82.342973) (xy 150.389207 82.342973) - (xy 150.389208 82.342974) (xy 150.389211 82.342976) (xy 150.553943 82.396501) (xy 150.553947 82.396502) - (xy 150.725036 82.4236) (xy 150.725039 82.4236) (xy 150.898264 82.4236) (xy 151.069352 82.396502) - (xy 151.069356 82.396501) (xy 151.234088 82.342976) (xy 151.23409 82.342974) (xy 151.234095 82.342973) - (xy 151.388438 82.264332) (xy 151.528578 82.162514) (xy 151.651064 82.040028) (xy 151.752882 81.899888) - (xy 151.752883 81.899885) (xy 151.755168 81.896741) (xy 151.75627 81.897542) (xy 151.79869 81.861294) - (xy 151.859685 81.856479) (xy 151.906602 81.882745) (xy 158.167437 88.14358) (xy 158.167439 88.143581) - (xy 158.16744 88.143582) (xy 158.167441 88.143583) (xy 158.258758 88.196305) (xy 158.258756 88.196305) - (xy 158.25876 88.196306) (xy 158.258762 88.196307) (xy 158.360623 88.2236) (xy 173.235933 88.2236) - (xy 173.294124 88.242507) (xy 173.330088 88.292007) (xy 173.330088 88.353193) (xy 173.327397 88.360485) - (xy 173.253638 88.538555) (xy 173.253638 88.538557) (xy 173.21615 88.727019) (xy 173.21615 88.91918) - (xy 173.253638 89.107642) (xy 173.253638 89.107644) (xy 173.327171 89.28517) (xy 173.327171 89.285171) - (xy 173.433929 89.444944) (xy 173.569805 89.58082) (xy 173.729577 89.687577) (xy 173.835945 89.731636) - (xy 173.88247 89.771373) (xy 173.896754 89.830867) (xy 173.873339 89.887395) (xy 173.835945 89.914564) - (xy 173.729577 89.958622) (xy 173.569805 90.065379) (xy 173.433929 90.201255) (xy 173.327171 90.361028) - (xy 173.327171 90.361029) (xy 173.253638 90.538555) (xy 173.253638 90.538557) (xy 173.21615 90.727019) - (xy 173.21615 90.91918) (xy 173.238833 91.033213) (xy 173.251305 91.095916) (xy 173.253638 91.107642) - (xy 173.253638 91.107644) (xy 173.327171 91.28517) (xy 173.327171 91.285171) (xy 173.433929 91.444944) - (xy 173.43393 91.444945) (xy 173.569805 91.58082) (xy 173.63348 91.623367) (xy 173.67136 91.671416) - (xy 173.673762 91.732555) (xy 173.639769 91.783428) (xy 173.623425 91.793891) (xy 173.575821 91.818146) - (xy 173.555218 91.833114) (xy 174.145204 92.4231) (xy 174.138989 92.4231) (xy 174.037256 92.450359) - (xy 173.946044 92.50302) (xy 173.87157 92.577494) (xy 173.818909 92.668706) (xy 173.79165 92.770439) - (xy 173.79165 92.776654) (xy 173.201664 92.186668) (xy 173.186698 92.207268) (xy 173.102734 92.372058) - (xy 173.045582 92.547956) (xy 173.01665 92.730622) (xy 173.01665 92.915577) (xy 173.045582 93.098243) - (xy 173.102734 93.274141) (xy 173.186696 93.438927) (xy 173.186701 93.438935) (xy 173.201664 93.459529) - (xy 173.79165 92.869543) (xy 173.79165 92.875761) (xy 173.818909 92.977494) (xy 173.87157 93.068706) - (xy 173.946044 93.14318) (xy 174.037256 93.195841) (xy 174.138989 93.2231) (xy 174.145202 93.2231) - (xy 173.555218 93.813084) (xy 173.575814 93.828048) (xy 173.575822 93.828053) (xy 173.657736 93.86979) - (xy 173.701001 93.913055) (xy 173.710572 93.973487) (xy 173.682795 94.028003) (xy 173.628278 94.055781) - (xy 173.612791 94.057) (xy 155.389336 94.057) (xy 155.331145 94.038093) (xy 155.295181 93.988593) - (xy 155.295181 93.927407) (xy 155.319332 93.887996) (xy 155.337239 93.870089) (xy 155.424844 93.738979) - (xy 155.485188 93.593297) (xy 155.51595 93.438642) (xy 155.51595 93.280957) (xy 155.485188 93.126303) - (xy 155.473565 93.098243) (xy 155.453742 93.050385) (xy 155.448941 92.989389) (xy 155.480911 92.93722) - (xy 155.537439 92.913805) (xy 155.545206 92.9135) (xy 163.682308 92.9135) (xy 163.684345 92.9136) - (xy 163.688185 92.9136) (xy 163.895114 92.9136) (xy 163.895115 92.9136) (xy 164.09807 92.87323) - (xy 164.289248 92.794041) (xy 164.461305 92.679077) (xy 164.607627 92.532755) (xy 164.722591 92.360698) - (xy 164.80178 92.16952) (xy 164.84215 91.966565) (xy 164.84215 91.759535) (xy 164.80178 91.55658) - (xy 164.722591 91.365402) (xy 164.607627 91.193345) (xy 164.461305 91.047023) (xy 164.440637 91.033213) - (xy 164.289247 90.932058) (xy 164.098068 90.852869) (xy 163.895117 90.8125) (xy 163.895115 90.8125) - (xy 142.886889 90.8125) (xy 142.828698 90.793593) (xy 142.816885 90.783504) (xy 134.906429 82.873048) - (xy 134.906427 82.873045) (xy 134.760105 82.726723) (xy 134.756096 82.724044) (xy 134.588047 82.611758) - (xy 134.396868 82.532569) (xy 134.193917 82.4922) (xy 134.193915 82.4922) (xy 133.573586 82.4922) - (xy 133.515395 82.473293) (xy 133.479431 82.423793) (xy 133.479431 82.362607) (xy 133.515395 82.313107) - (xy 133.528641 82.30499) (xy 133.608438 82.264332) (xy 133.748578 82.162514) (xy 133.871064 82.040028) - (xy 133.972882 81.899888) (xy 134.051523 81.745545) (xy 134.051524 81.74554) (xy 134.051526 81.745538) - (xy 134.105051 81.580806) (xy 134.105052 81.580802) (xy 134.13215 81.409714) (xy 134.13215 81.236485) - (xy 134.47115 81.236485) (xy 134.47115 81.409714) (xy 134.498247 81.580802) (xy 134.498248 81.580806) - (xy 134.551773 81.745538) (xy 134.551775 81.745541) (xy 134.629222 81.897542) (xy 134.630418 81.899888) - (xy 134.732236 82.040028) (xy 134.854722 82.162514) (xy 134.994862 82.264332) (xy 135.149205 82.342973) - (xy 135.149207 82.342973) (xy 135.149208 82.342974) (xy 135.149211 82.342976) (xy 135.313943 82.396501) - (xy 135.313947 82.396502) (xy 135.485036 82.4236) (xy 135.485039 82.4236) (xy 135.658264 82.4236) - (xy 135.829352 82.396502) (xy 135.829356 82.396501) (xy 135.994088 82.342976) (xy 135.99409 82.342974) - (xy 135.994095 82.342973) (xy 136.148438 82.264332) (xy 136.288578 82.162514) (xy 136.411064 82.040028) - (xy 136.512882 81.899888) (xy 136.591523 81.745545) (xy 136.591524 81.74554) (xy 136.591526 81.745538) - (xy 136.645051 81.580806) (xy 136.645052 81.580802) (xy 136.67215 81.409714) (xy 136.67215 81.236485) - (xy 137.01115 81.236485) (xy 137.01115 81.409714) (xy 137.038247 81.580802) (xy 137.038248 81.580806) - (xy 137.091773 81.745538) (xy 137.091775 81.745541) (xy 137.169222 81.897542) (xy 137.170418 81.899888) - (xy 137.272236 82.040028) (xy 137.394722 82.162514) (xy 137.534862 82.264332) (xy 137.689205 82.342973) - (xy 137.689207 82.342973) (xy 137.689208 82.342974) (xy 137.689211 82.342976) (xy 137.853943 82.396501) - (xy 137.853947 82.396502) (xy 138.025036 82.4236) (xy 138.025039 82.4236) (xy 138.198264 82.4236) - (xy 138.369352 82.396502) (xy 138.369356 82.396501) (xy 138.534088 82.342976) (xy 138.53409 82.342974) - (xy 138.534095 82.342973) (xy 138.688438 82.264332) (xy 138.828578 82.162514) (xy 138.951064 82.040028) - (xy 139.052882 81.899888) (xy 139.131523 81.745545) (xy 139.131524 81.74554) (xy 139.131526 81.745538) - (xy 139.185051 81.580806) (xy 139.185052 81.580802) (xy 139.21215 81.409714) (xy 139.21215 81.236485) - (xy 139.55115 81.236485) (xy 139.55115 81.409714) (xy 139.578247 81.580802) (xy 139.578248 81.580806) - (xy 139.631773 81.745538) (xy 139.631775 81.745541) (xy 139.709222 81.897542) (xy 139.710418 81.899888) - (xy 139.812236 82.040028) (xy 139.934722 82.162514) (xy 140.074862 82.264332) (xy 140.229205 82.342973) - (xy 140.229207 82.342973) (xy 140.229208 82.342974) (xy 140.229211 82.342976) (xy 140.393943 82.396501) - (xy 140.393947 82.396502) (xy 140.565036 82.4236) (xy 140.565039 82.4236) (xy 140.738264 82.4236) - (xy 140.909352 82.396502) (xy 140.909356 82.396501) (xy 141.074088 82.342976) (xy 141.07409 82.342974) - (xy 141.074095 82.342973) (xy 141.228438 82.264332) (xy 141.368578 82.162514) (xy 141.491064 82.040028) - (xy 141.592882 81.899888) (xy 141.671523 81.745545) (xy 141.671524 81.74554) (xy 141.671526 81.745538) - (xy 141.725051 81.580806) (xy 141.725052 81.580802) (xy 141.75215 81.409714) (xy 141.75215 81.236485) - (xy 142.09115 81.236485) (xy 142.09115 81.409714) (xy 142.118247 81.580802) (xy 142.118248 81.580806) - (xy 142.171773 81.745538) (xy 142.171775 81.745541) (xy 142.249222 81.897542) (xy 142.250418 81.899888) - (xy 142.352236 82.040028) (xy 142.474722 82.162514) (xy 142.614862 82.264332) (xy 142.769205 82.342973) - (xy 142.769207 82.342973) (xy 142.769208 82.342974) (xy 142.769211 82.342976) (xy 142.933943 82.396501) - (xy 142.933947 82.396502) (xy 143.105036 82.4236) (xy 143.105039 82.4236) (xy 143.278264 82.4236) - (xy 143.449352 82.396502) (xy 143.449356 82.396501) (xy 143.614088 82.342976) (xy 143.61409 82.342974) - (xy 143.614095 82.342973) (xy 143.768438 82.264332) (xy 143.908578 82.162514) (xy 144.031064 82.040028) - (xy 144.132882 81.899888) (xy 144.211523 81.745545) (xy 144.211524 81.74554) (xy 144.211526 81.745538) - (xy 144.265051 81.580806) (xy 144.265052 81.580802) (xy 144.29215 81.409714) (xy 144.29215 81.236485) - (xy 144.265052 81.065397) (xy 144.265051 81.065393) (xy 144.211526 80.900661) (xy 144.211524 80.900658) - (xy 144.211523 80.900657) (xy 144.211523 80.900655) (xy 144.132882 80.746312) (xy 144.031064 80.606172) - (xy 143.908578 80.483686) (xy 143.768438 80.381868) (xy 143.768437 80.381867) (xy 143.768435 80.381866) - (xy 143.614091 80.303225) (xy 143.614088 80.303223) (xy 143.449356 80.249698) (xy 143.449352 80.249697) - (xy 143.278264 80.2226) (xy 143.278261 80.2226) (xy 143.105039 80.2226) (xy 143.105036 80.2226) - (xy 142.933947 80.249697) (xy 142.933943 80.249698) (xy 142.769211 80.303223) (xy 142.769208 80.303225) - (xy 142.614864 80.381866) (xy 142.474723 80.483685) (xy 142.352235 80.606173) (xy 142.250416 80.746314) - (xy 142.171775 80.900658) (xy 142.171773 80.900661) (xy 142.118248 81.065393) (xy 142.118247 81.065397) - (xy 142.09115 81.236485) (xy 141.75215 81.236485) (xy 141.725052 81.065397) (xy 141.725051 81.065393) - (xy 141.671526 80.900661) (xy 141.671524 80.900658) (xy 141.671523 80.900657) (xy 141.671523 80.900655) - (xy 141.592882 80.746312) (xy 141.491064 80.606172) (xy 141.368578 80.483686) (xy 141.228438 80.381868) - (xy 141.228437 80.381867) (xy 141.228435 80.381866) (xy 141.074091 80.303225) (xy 141.074088 80.303223) - (xy 140.909356 80.249698) (xy 140.909352 80.249697) (xy 140.738264 80.2226) (xy 140.738261 80.2226) - (xy 140.565039 80.2226) (xy 140.565036 80.2226) (xy 140.393947 80.249697) (xy 140.393943 80.249698) - (xy 140.229211 80.303223) (xy 140.229208 80.303225) (xy 140.074864 80.381866) (xy 139.934723 80.483685) - (xy 139.812235 80.606173) (xy 139.710416 80.746314) (xy 139.631775 80.900658) (xy 139.631773 80.900661) - (xy 139.578248 81.065393) (xy 139.578247 81.065397) (xy 139.55115 81.236485) (xy 139.21215 81.236485) - (xy 139.185052 81.065397) (xy 139.185051 81.065393) (xy 139.131526 80.900661) (xy 139.131524 80.900658) - (xy 139.131523 80.900657) (xy 139.131523 80.900655) (xy 139.052882 80.746312) (xy 138.951064 80.606172) - (xy 138.828578 80.483686) (xy 138.688438 80.381868) (xy 138.688437 80.381867) (xy 138.688435 80.381866) - (xy 138.534091 80.303225) (xy 138.534088 80.303223) (xy 138.369356 80.249698) (xy 138.369352 80.249697) - (xy 138.198264 80.2226) (xy 138.198261 80.2226) (xy 138.025039 80.2226) (xy 138.025036 80.2226) - (xy 137.853947 80.249697) (xy 137.853943 80.249698) (xy 137.689211 80.303223) (xy 137.689208 80.303225) - (xy 137.534864 80.381866) (xy 137.394723 80.483685) (xy 137.272235 80.606173) (xy 137.170416 80.746314) - (xy 137.091775 80.900658) (xy 137.091773 80.900661) (xy 137.038248 81.065393) (xy 137.038247 81.065397) - (xy 137.01115 81.236485) (xy 136.67215 81.236485) (xy 136.645052 81.065397) (xy 136.645051 81.065393) - (xy 136.591526 80.900661) (xy 136.591524 80.900658) (xy 136.591523 80.900657) (xy 136.591523 80.900655) - (xy 136.512882 80.746312) (xy 136.411064 80.606172) (xy 136.288578 80.483686) (xy 136.148438 80.381868) - (xy 136.148437 80.381867) (xy 136.148435 80.381866) (xy 135.994091 80.303225) (xy 135.994088 80.303223) - (xy 135.829356 80.249698) (xy 135.829352 80.249697) (xy 135.658264 80.2226) (xy 135.658261 80.2226) - (xy 135.485039 80.2226) (xy 135.485036 80.2226) (xy 135.313947 80.249697) (xy 135.313943 80.249698) - (xy 135.149211 80.303223) (xy 135.149208 80.303225) (xy 134.994864 80.381866) (xy 134.854723 80.483685) - (xy 134.732235 80.606173) (xy 134.630416 80.746314) (xy 134.551775 80.900658) (xy 134.551773 80.900661) - (xy 134.498248 81.065393) (xy 134.498247 81.065397) (xy 134.47115 81.236485) (xy 134.13215 81.236485) - (xy 134.105052 81.065397) (xy 134.105051 81.065393) (xy 134.051526 80.900661) (xy 134.051524 80.900658) - (xy 134.051523 80.900657) (xy 134.051523 80.900655) (xy 133.972882 80.746312) (xy 133.871064 80.606172) - (xy 133.748578 80.483686) (xy 133.608438 80.381868) (xy 133.608437 80.381867) (xy 133.608435 80.381866) - (xy 133.454091 80.303225) (xy 133.454088 80.303223) (xy 133.289356 80.249698) (xy 133.289352 80.249697) - (xy 133.118264 80.2226) (xy 133.118261 80.2226) (xy 132.945039 80.2226) (xy 132.945036 80.2226) - (xy 132.773947 80.249697) (xy 132.773943 80.249698) (xy 132.609211 80.303223) (xy 132.609208 80.303225) - (xy 132.454864 80.381866) (xy 132.314723 80.483685) (xy 132.192235 80.606173) (xy 132.090416 80.746314) - (xy 132.011775 80.900658) (xy 132.011773 80.900661) (xy 131.958248 81.065393) (xy 131.958247 81.065397) - (xy 131.93115 81.236485) (xy 131.93115 81.409714) (xy 131.958247 81.580802) (xy 131.958248 81.580806) - (xy 132.011773 81.745538) (xy 132.011775 81.745541) (xy 132.089222 81.897542) (xy 132.090418 81.899888) - (xy 132.192236 82.040028) (xy 132.314722 82.162514) (xy 132.454862 82.264332) (xy 132.534659 82.30499) - (xy 132.577923 82.348254) (xy 132.587495 82.408686) (xy 132.559718 82.463203) (xy 132.505202 82.490981) - (xy 132.489714 82.4922) (xy 131.215882 82.4922) (xy 131.012931 82.532569) (xy 130.821752 82.611758) - (xy 130.649698 82.72672) (xy 130.50337 82.873048) (xy 130.388408 83.045102) (xy 130.309219 83.236281) - (xy 130.26885 83.439232) (xy 130.26885 83.646167) (xy 130.309219 83.849118) (xy 130.388408 84.040297) - (xy 130.495956 84.201255) (xy 130.503373 84.212355) (xy 130.649695 84.358677) (xy 130.821752 84.473641) - (xy 131.01293 84.55283) (xy 131.215885 84.5932) (xy 133.614311 84.5932) (xy 133.672502 84.612107) - (xy 133.684315 84.622196) (xy 137.28776 88.225641) (xy 137.315537 88.280158) (xy 137.305966 88.34059) - (xy 137.262701 88.383855) (xy 137.243381 88.391271) (xy 137.091666 88.431923) (xy 137.054531 88.453363) - (xy 136.954731 88.510982) (xy 136.903709 88.562004) (xy 136.849192 88.589781) (xy 136.833706 88.591) - (xy 133.130456 88.591) (xy 133.13044 88.590999) (xy 133.124377 88.590999) (xy 133.018923 88.590999) - (xy 132.917062 88.618293) (xy 132.917061 88.618293) (xy 132.917059 88.618294) (xy 132.891532 88.633032) - (xy 132.8714 88.644656) (xy 132.84245 88.66137) (xy 132.825736 88.67102) (xy 132.751169 88.745586) - (xy 132.75117 88.745587) (xy 129.666253 91.830504) (xy 129.611736 91.858281) (xy 129.596249 91.8595) - (xy 129.524093 91.8595) (xy 129.371366 91.900423) (xy 129.24358 91.9742) (xy 129.234431 91.979482) - (xy 129.165553 92.04836) (xy 129.151583 92.055477) (xy 129.140495 92.066566) (xy 129.125006 92.069019) - (xy 129.111036 92.076137) (xy 129.09555 92.073684) (xy 129.080063 92.076137) (xy 129.06609 92.069017) - (xy 129.050604 92.066565) (xy 129.025546 92.04836) (xy 128.998946 92.02176) (xy 128.971169 91.967243) - (xy 128.96995 91.951756) (xy 128.96995 82.522065) (xy 128.988857 82.463874) (xy 129.038357 82.42791) - (xy 129.054497 82.424701) (xy 129.054419 82.424209) (xy 129.229352 82.396502) (xy 129.229356 82.396501) - (xy 129.394088 82.342976) (xy 129.39409 82.342974) (xy 129.394095 82.342973) (xy 129.548438 82.264332) - (xy 129.688578 82.162514) (xy 129.811064 82.040028) (xy 129.912882 81.899888) (xy 129.975162 81.777654) - (xy 130.018426 81.734391) (xy 130.063372 81.7236) (xy 130.126075 81.7236) (xy 130.126077 81.7236) - (xy 130.227938 81.696307) (xy 130.22794 81.696305) (xy 130.227942 81.696305) (xy 130.319258 81.643583) - (xy 130.319258 81.643582) (xy 130.319263 81.64358) (xy 135.604047 76.358796) (xy 135.658564 76.331019) - (xy 135.674051 76.3298) (xy 150.88355 76.3298) + (xy 135.125572 75.754707) (xy 135.161536 75.804207) (xy 135.161536 75.865393) (xy 135.137385 75.904804) + (xy 130.022818 81.01937) (xy 129.968301 81.047147) (xy 129.907869 81.037576) (xy 129.864604 80.994311) + (xy 129.861357 80.987268) (xy 129.827034 80.904403) (xy 129.813974 80.872873) (xy 129.813968 80.872861) + (xy 129.736983 80.757647) (xy 129.709952 80.717192) (xy 129.577558 80.584798) (xy 129.523854 80.548914) + (xy 129.421888 80.480781) (xy 129.421879 80.480777) (xy 129.248899 80.409126) (xy 129.065268 80.3726) + (xy 129.065266 80.3726) (xy 128.878034 80.3726) (xy 128.878031 80.3726) (xy 128.6944 80.409126) + (xy 128.52142 80.480777) (xy 128.521411 80.480781) (xy 128.365742 80.584798) (xy 128.365738 80.584801) + (xy 128.233351 80.717188) (xy 128.233348 80.717192) (xy 128.129331 80.872861) (xy 128.129327 80.87287) + (xy 128.106514 80.927946) (xy 128.066777 80.974472) (xy 128.007282 80.988755) (xy 127.950754 80.96534) + (xy 127.918785 80.913171) (xy 127.91605 80.89006) (xy 127.91605 75.855169) (xy 127.918518 75.847571) + (xy 127.917269 75.839682) (xy 127.927793 75.819026) (xy 127.934957 75.796978) (xy 127.945046 75.785165) + (xy 127.965415 75.764796) (xy 128.019932 75.737019) (xy 128.035419 75.7358) (xy 135.067381 75.7358) ) ) (filled_polygon (layer "B.Cu") (pts - (xy 102.143376 76.110182) (xy 102.148819 76.110898) (xy 102.148823 76.1109) (xy 102.254276 76.1109) - (xy 127.16605 76.1109) (xy 127.224241 76.129807) (xy 127.260205 76.179307) (xy 127.26505 76.2099) - (xy 127.26505 80.374009) (xy 127.246143 80.4322) (xy 127.196643 80.468164) (xy 127.135457 80.468164) - (xy 127.107859 80.454102) (xy 127.008436 80.381866) (xy 126.854091 80.303225) (xy 126.854088 80.303223) - (xy 126.689356 80.249698) (xy 126.689352 80.249697) (xy 126.518264 80.2226) (xy 126.518261 80.2226) - (xy 126.345039 80.2226) (xy 126.345036 80.2226) (xy 126.173947 80.249697) (xy 126.173943 80.249698) - (xy 126.009211 80.303223) (xy 126.009208 80.303225) (xy 125.854864 80.381866) (xy 125.714723 80.483685) - (xy 125.592235 80.606173) (xy 125.490416 80.746314) (xy 125.411775 80.900658) (xy 125.411773 80.900661) - (xy 125.358248 81.065393) (xy 125.358247 81.065397) (xy 125.33115 81.236485) (xy 125.33115 81.409714) - (xy 125.358247 81.580802) (xy 125.358248 81.580806) (xy 125.411773 81.745538) (xy 125.411775 81.745541) - (xy 125.489222 81.897542) (xy 125.490418 81.899888) (xy 125.592236 82.040028) (xy 125.714722 82.162514) - (xy 125.854862 82.264332) (xy 126.009205 82.342973) (xy 126.009207 82.342973) (xy 126.009208 82.342974) - (xy 126.009211 82.342976) (xy 126.173943 82.396501) (xy 126.173947 82.396502) (xy 126.345036 82.4236) - (xy 126.345039 82.4236) (xy 126.518264 82.4236) (xy 126.689352 82.396502) (xy 126.689356 82.396501) - (xy 126.854088 82.342976) (xy 126.85409 82.342974) (xy 126.854095 82.342973) (xy 127.008438 82.264332) - (xy 127.107859 82.192097) (xy 127.166049 82.17319) (xy 127.22424 82.192097) (xy 127.260204 82.241597) - (xy 127.26505 82.27219) (xy 127.26505 88.392143) (xy 127.246143 88.450334) (xy 127.196643 88.486298) - (xy 127.135457 88.486298) (xy 127.128165 88.483608) (xy 127.055147 88.453363) (xy 127.055143 88.453362) - (xy 126.900494 88.4226) (xy 126.900492 88.4226) (xy 126.830492 88.4226) (xy 126.672808 88.4226) - (xy 126.672805 88.4226) (xy 126.518153 88.453363) (xy 126.518151 88.453363) (xy 126.372475 88.513703) - (xy 126.372464 88.513709) (xy 126.241361 88.601311) (xy 126.241357 88.601314) (xy 126.080264 88.762407) - (xy 126.080261 88.762411) (xy 125.992659 88.893514) (xy 125.992653 88.893525) (xy 125.932313 89.039201) - (xy 125.932313 89.039203) (xy 125.90155 89.193855) (xy 125.90155 89.253667) (xy 125.882643 89.311858) - (xy 125.872553 89.323671) (xy 125.45328 89.742943) (xy 125.402593 89.770036) (xy 125.33462 89.783557) - (xy 125.334614 89.783559) (xy 125.211683 89.834478) (xy 125.101047 89.908402) (xy 125.006952 90.002497) - (xy 124.933028 90.113133) (xy 124.88211 90.236062) (xy 124.85615 90.366568) (xy 124.85615 90.499631) - (xy 124.860987 90.52395) (xy 124.88211 90.630136) (xy 124.914483 90.708293) (xy 124.919468 90.720327) - (xy 124.924267 90.781324) (xy 124.898007 90.828216) (xy 124.711216 91.015007) (xy 124.656699 91.042784) - (xy 124.596267 91.033213) (xy 124.555476 90.994502) (xy 124.53497 90.958984) (xy 124.423166 90.84718) - (xy 124.286234 90.768123) (xy 124.133507 90.7272) (xy 124.133505 90.7272) (xy 124.061351 90.7272) - (xy 124.00316 90.708293) (xy 123.991347 90.698204) (xy 119.965743 86.6726) (xy 115.825139 82.531996) - (xy 115.797364 82.477482) (xy 115.806935 82.41705) (xy 115.8502 82.373785) (xy 115.910632 82.364214) - (xy 115.925738 82.367841) (xy 116.013943 82.396501) (xy 116.013947 82.396502) (xy 116.185036 82.4236) - (xy 116.185039 82.4236) (xy 116.358264 82.4236) (xy 116.529352 82.396502) (xy 116.529356 82.396501) - (xy 116.694088 82.342976) (xy 116.69409 82.342974) (xy 116.694095 82.342973) (xy 116.848438 82.264332) - (xy 116.988578 82.162514) (xy 117.111064 82.040028) (xy 117.212882 81.899888) (xy 117.291523 81.745545) - (xy 117.291524 81.74554) (xy 117.291526 81.745538) (xy 117.345051 81.580806) (xy 117.345052 81.580802) - (xy 117.37215 81.409714) (xy 117.37215 81.236485) (xy 117.71115 81.236485) (xy 117.71115 81.409714) - (xy 117.738247 81.580802) (xy 117.738248 81.580806) (xy 117.791773 81.745538) (xy 117.791775 81.745541) - (xy 117.869222 81.897542) (xy 117.870418 81.899888) (xy 117.972236 82.040028) (xy 118.094722 82.162514) - (xy 118.234862 82.264332) (xy 118.389205 82.342973) (xy 118.389207 82.342973) (xy 118.389208 82.342974) - (xy 118.389211 82.342976) (xy 118.553943 82.396501) (xy 118.553947 82.396502) (xy 118.725036 82.4236) - (xy 118.725039 82.4236) (xy 118.898264 82.4236) (xy 119.069352 82.396502) (xy 119.069356 82.396501) - (xy 119.234088 82.342976) (xy 119.23409 82.342974) (xy 119.234095 82.342973) (xy 119.388438 82.264332) - (xy 119.528578 82.162514) (xy 119.651064 82.040028) (xy 119.752882 81.899888) (xy 119.831523 81.745545) - (xy 119.831524 81.74554) (xy 119.831526 81.745538) (xy 119.885051 81.580806) (xy 119.885052 81.580802) - (xy 119.91215 81.409714) (xy 119.91215 81.236485) (xy 120.25115 81.236485) (xy 120.25115 81.409714) - (xy 120.278247 81.580802) (xy 120.278248 81.580806) (xy 120.331773 81.745538) (xy 120.331775 81.745541) - (xy 120.409222 81.897542) (xy 120.410418 81.899888) (xy 120.512236 82.040028) (xy 120.634722 82.162514) - (xy 120.774862 82.264332) (xy 120.929205 82.342973) (xy 120.929207 82.342973) (xy 120.929208 82.342974) - (xy 120.929211 82.342976) (xy 121.093943 82.396501) (xy 121.093947 82.396502) (xy 121.265036 82.4236) - (xy 121.265039 82.4236) (xy 121.438264 82.4236) (xy 121.609352 82.396502) (xy 121.609356 82.396501) - (xy 121.774088 82.342976) (xy 121.77409 82.342974) (xy 121.774095 82.342973) (xy 121.928438 82.264332) - (xy 122.068578 82.162514) (xy 122.191064 82.040028) (xy 122.292882 81.899888) (xy 122.371523 81.745545) - (xy 122.371524 81.74554) (xy 122.371526 81.745538) (xy 122.425051 81.580806) (xy 122.425052 81.580802) - (xy 122.45215 81.409714) (xy 122.45215 81.236485) (xy 122.79115 81.236485) (xy 122.79115 81.409714) - (xy 122.818247 81.580802) (xy 122.818248 81.580806) (xy 122.871773 81.745538) (xy 122.871775 81.745541) - (xy 122.949222 81.897542) (xy 122.950418 81.899888) (xy 123.052236 82.040028) (xy 123.174722 82.162514) - (xy 123.314862 82.264332) (xy 123.469205 82.342973) (xy 123.469207 82.342973) (xy 123.469208 82.342974) - (xy 123.469211 82.342976) (xy 123.633943 82.396501) (xy 123.633947 82.396502) (xy 123.805036 82.4236) - (xy 123.805039 82.4236) (xy 123.978264 82.4236) (xy 124.149352 82.396502) (xy 124.149356 82.396501) - (xy 124.314088 82.342976) (xy 124.31409 82.342974) (xy 124.314095 82.342973) (xy 124.468438 82.264332) - (xy 124.608578 82.162514) (xy 124.731064 82.040028) (xy 124.832882 81.899888) (xy 124.911523 81.745545) - (xy 124.911524 81.74554) (xy 124.911526 81.745538) (xy 124.965051 81.580806) (xy 124.965052 81.580802) - (xy 124.99215 81.409714) (xy 124.99215 81.236485) (xy 124.965052 81.065397) (xy 124.965051 81.065393) - (xy 124.911526 80.900661) (xy 124.911524 80.900658) (xy 124.911523 80.900657) (xy 124.911523 80.900655) - (xy 124.832882 80.746312) (xy 124.731064 80.606172) (xy 124.608578 80.483686) (xy 124.468438 80.381868) - (xy 124.468437 80.381867) (xy 124.468435 80.381866) (xy 124.314091 80.303225) (xy 124.314088 80.303223) - (xy 124.149356 80.249698) (xy 124.149352 80.249697) (xy 123.978264 80.2226) (xy 123.978261 80.2226) - (xy 123.805039 80.2226) (xy 123.805036 80.2226) (xy 123.633947 80.249697) (xy 123.633943 80.249698) - (xy 123.469211 80.303223) (xy 123.469208 80.303225) (xy 123.314864 80.381866) (xy 123.174723 80.483685) - (xy 123.052235 80.606173) (xy 122.950416 80.746314) (xy 122.871775 80.900658) (xy 122.871773 80.900661) - (xy 122.818248 81.065393) (xy 122.818247 81.065397) (xy 122.79115 81.236485) (xy 122.45215 81.236485) - (xy 122.425052 81.065397) (xy 122.425051 81.065393) (xy 122.371526 80.900661) (xy 122.371524 80.900658) - (xy 122.371523 80.900657) (xy 122.371523 80.900655) (xy 122.292882 80.746312) (xy 122.191064 80.606172) - (xy 122.068578 80.483686) (xy 121.928438 80.381868) (xy 121.928437 80.381867) (xy 121.928435 80.381866) - (xy 121.774091 80.303225) (xy 121.774088 80.303223) (xy 121.609356 80.249698) (xy 121.609352 80.249697) - (xy 121.438264 80.2226) (xy 121.438261 80.2226) (xy 121.265039 80.2226) (xy 121.265036 80.2226) - (xy 121.093947 80.249697) (xy 121.093943 80.249698) (xy 120.929211 80.303223) (xy 120.929208 80.303225) - (xy 120.774864 80.381866) (xy 120.634723 80.483685) (xy 120.512235 80.606173) (xy 120.410416 80.746314) - (xy 120.331775 80.900658) (xy 120.331773 80.900661) (xy 120.278248 81.065393) (xy 120.278247 81.065397) - (xy 120.25115 81.236485) (xy 119.91215 81.236485) (xy 119.885052 81.065397) (xy 119.885051 81.065393) - (xy 119.831526 80.900661) (xy 119.831524 80.900658) (xy 119.831523 80.900657) (xy 119.831523 80.900655) - (xy 119.752882 80.746312) (xy 119.651064 80.606172) (xy 119.528578 80.483686) (xy 119.388438 80.381868) - (xy 119.388437 80.381867) (xy 119.388435 80.381866) (xy 119.234091 80.303225) (xy 119.234088 80.303223) - (xy 119.069356 80.249698) (xy 119.069352 80.249697) (xy 118.898264 80.2226) (xy 118.898261 80.2226) - (xy 118.725039 80.2226) (xy 118.725036 80.2226) (xy 118.553947 80.249697) (xy 118.553943 80.249698) - (xy 118.389211 80.303223) (xy 118.389208 80.303225) (xy 118.234864 80.381866) (xy 118.094723 80.483685) - (xy 117.972235 80.606173) (xy 117.870416 80.746314) (xy 117.791775 80.900658) (xy 117.791773 80.900661) - (xy 117.738248 81.065393) (xy 117.738247 81.065397) (xy 117.71115 81.236485) (xy 117.37215 81.236485) - (xy 117.345052 81.065397) (xy 117.345051 81.065393) (xy 117.291526 80.900661) (xy 117.291524 80.900658) - (xy 117.291523 80.900657) (xy 117.291523 80.900655) (xy 117.212882 80.746312) (xy 117.111064 80.606172) - (xy 116.988578 80.483686) (xy 116.848438 80.381868) (xy 116.848437 80.381867) (xy 116.848435 80.381866) - (xy 116.694091 80.303225) (xy 116.694088 80.303223) (xy 116.529356 80.249698) (xy 116.529352 80.249697) - (xy 116.358264 80.2226) (xy 116.358261 80.2226) (xy 116.185039 80.2226) (xy 116.185036 80.2226) - (xy 116.013947 80.249697) (xy 116.013943 80.249698) (xy 115.849211 80.303223) (xy 115.849208 80.303225) - (xy 115.694864 80.381866) (xy 115.554723 80.483685) (xy 115.432235 80.606173) (xy 115.330416 80.746314) - (xy 115.251775 80.900658) (xy 115.251773 80.900661) (xy 115.197127 81.068843) (xy 115.161163 81.118343) - (xy 115.102972 81.13725) (xy 115.044782 81.118342) (xy 115.008818 81.068842) (xy 115.005192 81.053736) - (xy 114.999641 81.018687) (xy 114.936406 80.824072) (xy 114.843511 80.641753) (xy 114.723235 80.476208) - (xy 114.578541 80.331514) (xy 114.412996 80.211238) (xy 114.230677 80.118343) (xy 114.036064 80.055109) - (xy 113.98165 80.04649) (xy 113.98165 80.890088) (xy 113.924643 80.857175) (xy 113.797476 80.8231) - (xy 113.665824 80.8231) (xy 113.538657 80.857175) (xy 113.48165 80.890088) (xy 113.48165 80.046491) - (xy 113.481649 80.04649) (xy 113.427235 80.055109) (xy 113.232622 80.118343) (xy 113.050303 80.211238) - (xy 112.884758 80.331514) (xy 112.740064 80.476208) (xy 112.619788 80.641753) (xy 112.526893 80.824072) - (xy 112.463659 81.018686) (xy 112.458107 81.053738) (xy 112.430329 81.108254) (xy 112.375812 81.136031) - (xy 112.31538 81.126459) (xy 112.272116 81.083194) (xy 112.266171 81.068843) (xy 112.249031 81.016093) - (xy 112.211523 80.900655) (xy 112.132882 80.746312) (xy 112.031064 80.606172) (xy 111.908578 80.483686) - (xy 111.768438 80.381868) (xy 111.768437 80.381867) (xy 111.768435 80.381866) (xy 111.614091 80.303225) - (xy 111.614088 80.303223) (xy 111.449356 80.249698) (xy 111.449352 80.249697) (xy 111.278264 80.2226) - (xy 111.278261 80.2226) (xy 111.105039 80.2226) (xy 111.105036 80.2226) (xy 110.933947 80.249697) - (xy 110.933943 80.249698) (xy 110.769211 80.303223) (xy 110.769208 80.303225) (xy 110.614864 80.381866) - (xy 110.474723 80.483685) (xy 110.352235 80.606173) (xy 110.250416 80.746314) (xy 110.171775 80.900658) - (xy 110.171773 80.900661) (xy 110.118248 81.065393) (xy 110.118247 81.065397) (xy 110.09115 81.236485) - (xy 110.09115 81.409714) (xy 110.118247 81.580802) (xy 110.118248 81.580806) (xy 110.171773 81.745538) - (xy 110.171775 81.745541) (xy 110.250417 81.899887) (xy 110.250421 81.899893) (xy 110.269977 81.926809) - (xy 110.288885 81.984999) (xy 110.269978 82.04319) (xy 110.220478 82.079154) (xy 110.189885 82.084) - (xy 109.653415 82.084) (xy 109.595224 82.065093) (xy 109.55926 82.015593) (xy 109.55926 81.954407) - (xy 109.573323 81.926809) (xy 109.582348 81.914386) (xy 109.592882 81.899888) (xy 109.671523 81.745545) - (xy 109.671524 81.74554) (xy 109.671526 81.745538) (xy 109.725051 81.580806) (xy 109.725052 81.580802) - (xy 109.75215 81.409714) (xy 109.75215 81.236485) (xy 109.725052 81.065397) (xy 109.725051 81.065393) - (xy 109.671526 80.900661) (xy 109.671524 80.900658) (xy 109.671523 80.900657) (xy 109.671523 80.900655) - (xy 109.592882 80.746312) (xy 109.491064 80.606172) (xy 109.368578 80.483686) (xy 109.228438 80.381868) - (xy 109.228437 80.381867) (xy 109.228435 80.381866) (xy 109.074091 80.303225) (xy 109.074088 80.303223) - (xy 108.909356 80.249698) (xy 108.909352 80.249697) (xy 108.738264 80.2226) (xy 108.738261 80.2226) - (xy 108.565039 80.2226) (xy 108.565036 80.2226) (xy 108.393947 80.249697) (xy 108.393943 80.249698) - (xy 108.229211 80.303223) (xy 108.229208 80.303225) (xy 108.074864 80.381866) (xy 107.934723 80.483685) - (xy 107.812235 80.606173) (xy 107.710416 80.746314) (xy 107.631775 80.900658) (xy 107.631773 80.900661) - (xy 107.578248 81.065393) (xy 107.578247 81.065397) (xy 107.55115 81.236485) (xy 107.55115 81.409714) - (xy 107.578247 81.580798) (xy 107.58392 81.598258) (xy 107.58392 81.659444) (xy 107.547956 81.708944) - (xy 107.515389 81.724477) (xy 107.422669 81.749321) (xy 107.422665 81.749323) (xy 107.286135 81.828148) - (xy 107.226287 81.840869) (xy 107.170392 81.815982) (xy 107.139799 81.762994) (xy 107.142482 81.711818) - (xy 107.185051 81.580806) (xy 107.185052 81.580802) (xy 107.21215 81.409714) (xy 107.21215 81.236485) - (xy 107.185052 81.065397) (xy 107.185051 81.065393) (xy 107.131526 80.900661) (xy 107.131524 80.900658) - (xy 107.131523 80.900657) (xy 107.131523 80.900655) (xy 107.052882 80.746312) (xy 106.951064 80.606172) - (xy 106.828578 80.483686) (xy 106.688438 80.381868) (xy 106.688437 80.381867) (xy 106.688435 80.381866) - (xy 106.534091 80.303225) (xy 106.534088 80.303223) (xy 106.369356 80.249698) (xy 106.369352 80.249697) - (xy 106.198264 80.2226) (xy 106.198261 80.2226) (xy 106.025039 80.2226) (xy 106.025036 80.2226) - (xy 105.853947 80.249697) (xy 105.853943 80.249698) (xy 105.689211 80.303223) (xy 105.689208 80.303225) - (xy 105.534864 80.381866) (xy 105.394723 80.483685) (xy 105.272235 80.606173) (xy 105.170416 80.746314) - (xy 105.091775 80.900658) (xy 105.091773 80.900661) (xy 105.038248 81.065393) (xy 105.038247 81.065397) - (xy 105.01115 81.236485) (xy 105.01115 81.409714) (xy 105.038247 81.580802) (xy 105.038248 81.580806) - (xy 105.091773 81.745538) (xy 105.091775 81.745541) (xy 105.169222 81.897542) (xy 105.170418 81.899888) - (xy 105.272236 82.040028) (xy 105.394722 82.162514) (xy 105.534862 82.264332) (xy 105.689205 82.342973) - (xy 105.718665 82.352545) (xy 105.768165 82.388509) (xy 105.787072 82.4467) (xy 105.768165 82.504891) - (xy 105.718665 82.540855) (xy 105.688072 82.5457) (xy 104.947789 82.5457) (xy 104.889598 82.526793) - (xy 104.877785 82.516704) (xy 104.662229 82.301148) (xy 104.662227 82.301145) (xy 104.515905 82.154823) - (xy 104.515901 82.15482) (xy 104.343847 82.039858) (xy 104.152668 81.960669) (xy 103.949717 81.9203) - (xy 103.949715 81.9203) (xy 103.763789 81.9203) (xy 103.705598 81.901393) (xy 103.693785 81.891304) - (xy 103.184498 81.382017) (xy 103.156721 81.3275) (xy 103.166292 81.267068) (xy 103.205 81.226278) - (xy 103.244766 81.20332) (xy 103.35657 81.091516) (xy 103.435627 80.954584) (xy 103.47655 80.801857) - (xy 103.47655 80.643743) (xy 103.435627 80.491016) (xy 103.35657 80.354084) (xy 103.244766 80.24228) - (xy 103.107834 80.163223) (xy 102.955107 80.1223) (xy 102.796993 80.1223) (xy 102.690872 80.150734) - (xy 102.629771 80.147532) (xy 102.582221 80.109027) (xy 102.56625 80.055108) (xy 102.56625 77.076636) - (xy 102.566249 77.076632) (xy 102.565546 77.0731) (xy 102.52588 76.87368) (xy 102.446691 76.682502) - (xy 102.331727 76.510445) (xy 102.185405 76.364123) (xy 102.181454 76.361483) (xy 102.075445 76.29065) - (xy 102.037565 76.2426) (xy 102.035163 76.181461) (xy 102.069156 76.130588) (xy 102.126559 76.10941) - ) - ) - (filled_polygon - (layer "B.Cu") - (pts - (xy 134.76344 75.904707) (xy 134.799404 75.954207) (xy 134.799404 76.015393) (xy 134.775253 76.054804) - (xy 130.066602 80.763453) (xy 130.012085 80.79123) (xy 129.951653 80.781659) (xy 129.916089 80.748789) - (xy 129.915168 80.749459) (xy 129.912883 80.746314) (xy 129.912882 80.746312) (xy 129.811064 80.606172) - (xy 129.688578 80.483686) (xy 129.548438 80.381868) (xy 129.548437 80.381867) (xy 129.548435 80.381866) - (xy 129.394091 80.303225) (xy 129.394088 80.303223) (xy 129.229356 80.249698) (xy 129.229352 80.249697) - (xy 129.058264 80.2226) (xy 129.058261 80.2226) (xy 128.885039 80.2226) (xy 128.885036 80.2226) - (xy 128.713947 80.249697) (xy 128.713943 80.249698) (xy 128.549211 80.303223) (xy 128.549208 80.303225) - (xy 128.394864 80.381866) (xy 128.254723 80.483685) (xy 128.254722 80.483686) (xy 128.235051 80.503356) - (xy 128.180537 80.531132) (xy 128.120105 80.521561) (xy 128.07684 80.478296) (xy 128.06605 80.433351) - (xy 128.06605 75.9848) (xy 128.084957 75.926609) (xy 128.134457 75.890645) (xy 128.16505 75.8858) - (xy 134.705249 75.8858) - ) - ) - (filled_polygon - (layer "B.Cu") - (pts - (xy 144.651097 72.986207) (xy 144.687061 73.035707) (xy 144.687061 73.096893) (xy 144.651098 73.146391) - (xy 144.542149 73.225547) (xy 144.414097 73.353599) (xy 144.383625 73.39554) (xy 144.307652 73.500108) - (xy 144.225438 73.661462) (xy 144.169478 73.833693) (xy 144.14115 74.01255) (xy 144.14115 74.193649) - (xy 144.169478 74.372506) (xy 144.225438 74.544737) (xy 144.269669 74.631546) (xy 144.307654 74.706094) - (xy 144.414097 74.852601) (xy 144.542149 74.980653) (xy 144.688656 75.087096) (xy 144.850011 75.169311) - (xy 145.022241 75.225271) (xy 145.093786 75.236602) (xy 145.201101 75.2536) (xy 145.201104 75.2536) - (xy 145.382199 75.2536) (xy 145.471627 75.239435) (xy 145.561059 75.225271) (xy 145.733289 75.169311) - (xy 145.894644 75.087096) (xy 146.041151 74.980653) (xy 146.169203 74.852601) (xy 146.275646 74.706094) - (xy 146.357861 74.544739) (xy 146.413821 74.372509) (xy 146.44215 74.193646) (xy 146.44215 74.012554) - (xy 146.44215 74.01255) (xy 146.421396 73.881516) (xy 146.413821 73.833691) (xy 146.357861 73.661461) - (xy 146.275646 73.500106) (xy 146.169203 73.353599) (xy 146.041151 73.225547) (xy 145.932201 73.146391) - (xy 145.896239 73.096893) (xy 145.896239 73.035707) (xy 145.932203 72.986207) (xy 145.990394 72.9673) - (xy 147.132906 72.9673) (xy 147.191097 72.986207) (xy 147.227061 73.035707) (xy 147.227061 73.096893) - (xy 147.191098 73.146391) (xy 147.082149 73.225547) (xy 146.954097 73.353599) (xy 146.923625 73.39554) - (xy 146.847652 73.500108) (xy 146.765438 73.661462) (xy 146.709478 73.833693) (xy 146.68115 74.01255) - (xy 146.68115 74.193649) (xy 146.709478 74.372506) (xy 146.765438 74.544737) (xy 146.809669 74.631546) - (xy 146.847654 74.706094) (xy 146.954097 74.852601) (xy 147.082149 74.980653) (xy 147.228656 75.087096) - (xy 147.390011 75.169311) (xy 147.562241 75.225271) (xy 147.633786 75.236602) (xy 147.741101 75.2536) - (xy 147.741104 75.2536) (xy 147.922199 75.2536) (xy 148.011627 75.239435) (xy 148.101059 75.225271) - (xy 148.273289 75.169311) (xy 148.434644 75.087096) (xy 148.581151 74.980653) (xy 148.709203 74.852601) - (xy 148.815646 74.706094) (xy 148.897861 74.544739) (xy 148.953821 74.372509) (xy 148.98215 74.193646) - (xy 148.98215 74.012554) (xy 148.98215 74.01255) (xy 148.961396 73.881516) (xy 148.953821 73.833691) - (xy 148.897861 73.661461) (xy 148.815646 73.500106) (xy 148.709203 73.353599) (xy 148.581151 73.225547) - (xy 148.472201 73.146391) (xy 148.436239 73.096893) (xy 148.436239 73.035707) (xy 148.472203 72.986207) - (xy 148.530394 72.9673) (xy 149.672906 72.9673) (xy 149.731097 72.986207) (xy 149.767061 73.035707) - (xy 149.767061 73.096893) (xy 149.731098 73.146391) (xy 149.622149 73.225547) (xy 149.494097 73.353599) - (xy 149.463625 73.39554) (xy 149.387652 73.500108) (xy 149.305438 73.661462) (xy 149.249478 73.833693) - (xy 149.22115 74.01255) (xy 149.22115 74.193649) (xy 149.249478 74.372506) (xy 149.305438 74.544737) - (xy 149.349669 74.631546) (xy 149.387654 74.706094) (xy 149.494097 74.852601) (xy 149.622149 74.980653) - (xy 149.768656 75.087096) (xy 149.930011 75.169311) (xy 150.102241 75.225271) (xy 150.173786 75.236602) - (xy 150.281101 75.2536) (xy 150.281104 75.2536) (xy 150.462199 75.2536) (xy 150.551627 75.239435) - (xy 150.641059 75.225271) (xy 150.813289 75.169311) (xy 150.974644 75.087096) (xy 151.121151 74.980653) - (xy 151.249203 74.852601) (xy 151.355646 74.706094) (xy 151.437861 74.544739) (xy 151.438492 74.542796) - (xy 151.442612 74.530118) (xy 151.478574 74.480617) (xy 151.536765 74.461708) (xy 151.594956 74.480614) - (xy 151.630921 74.530113) (xy 151.630922 74.530115) (xy 151.660554 74.621315) (xy 151.757026 74.810653) - (xy 151.75703 74.810659) (xy 151.796378 74.864816) (xy 151.796379 74.864816) (xy 152.428687 74.232507) - (xy 152.445725 74.296093) (xy 152.511551 74.410107) (xy 152.604643 74.503199) (xy 152.718657 74.569025) - (xy 152.782239 74.586062) (xy 152.149932 75.218369) (xy 152.149932 75.21837) (xy 152.20409 75.257719) - (xy 152.204096 75.257723) (xy 152.368695 75.34159) (xy 152.41196 75.384855) (xy 152.421531 75.445287) - (xy 152.393754 75.499803) (xy 152.339237 75.527581) (xy 152.32375 75.5288) (xy 142.13135 75.5288) - (xy 142.073159 75.509893) (xy 142.037195 75.460393) (xy 142.037195 75.399207) (xy 142.061346 75.359797) - (xy 142.2232 75.197942) (xy 142.277717 75.170164) (xy 142.323796 75.17379) (xy 142.482241 75.225271) - (xy 142.553786 75.236602) (xy 142.661101 75.2536) (xy 142.661104 75.2536) (xy 142.842199 75.2536) - (xy 142.931627 75.239435) (xy 143.021059 75.225271) (xy 143.193289 75.169311) (xy 143.354644 75.087096) - (xy 143.501151 74.980653) (xy 143.629203 74.852601) (xy 143.735646 74.706094) (xy 143.817861 74.544739) - (xy 143.873821 74.372509) (xy 143.90215 74.193646) (xy 143.90215 74.012554) (xy 143.90215 74.01255) - (xy 143.881396 73.881516) (xy 143.873821 73.833691) (xy 143.817861 73.661461) (xy 143.735646 73.500106) - (xy 143.629203 73.353599) (xy 143.501151 73.225547) (xy 143.392201 73.146391) (xy 143.356239 73.096893) - (xy 143.356239 73.035707) (xy 143.392203 72.986207) (xy 143.450394 72.9673) (xy 144.592906 72.9673) - ) - ) - (filled_polygon - (layer "B.Cu") - (pts - (xy 152.146587 72.986207) (xy 152.1584 72.996296) (xy 152.782241 73.620137) (xy 152.718657 73.637175) - (xy 152.604643 73.703001) (xy 152.511551 73.796093) (xy 152.445725 73.910107) (xy 152.428687 73.973691) - (xy 151.796378 73.341382) (xy 151.757028 73.395542) (xy 151.757026 73.395546) (xy 151.660554 73.584884) - (xy 151.630922 73.676084) (xy 151.594958 73.725584) (xy 151.536767 73.744491) (xy 151.478576 73.725584) - (xy 151.442612 73.676084) (xy 151.442612 73.676083) (xy 151.441474 73.672583) (xy 151.437861 73.661461) - (xy 151.355646 73.500106) (xy 151.249203 73.353599) (xy 151.121151 73.225547) (xy 151.012201 73.146391) - (xy 150.976239 73.096893) (xy 150.976239 73.035707) (xy 151.012203 72.986207) (xy 151.070394 72.9673) - (xy 152.088396 72.9673) - ) - ) - (filled_polygon - (layer "B.Cu") - (pts - (xy 154.811097 72.986207) (xy 154.847061 73.035707) (xy 154.847061 73.096893) (xy 154.811098 73.146391) - (xy 154.702149 73.225547) (xy 154.574097 73.353599) (xy 154.543625 73.39554) (xy 154.467652 73.500108) - (xy 154.385437 73.661464) (xy 154.385436 73.661466) (xy 154.380685 73.676088) (xy 154.344719 73.725586) - (xy 154.286528 73.744491) (xy 154.228338 73.725581) (xy 154.192377 73.676083) (xy 154.162746 73.584886) - (xy 154.066273 73.395546) (xy 154.066269 73.39554) (xy 154.02692 73.341382) (xy 154.026919 73.341382) - (xy 153.394612 73.973689) (xy 153.377575 73.910107) (xy 153.311749 73.796093) (xy 153.218657 73.703001) - (xy 153.104643 73.637175) (xy 153.041057 73.620136) (xy 153.664899 72.996296) (xy 153.719416 72.968519) - (xy 153.734903 72.9673) (xy 154.752906 72.9673) - ) - ) - (filled_polygon - (layer "B.Cu") - (pts - (xy 154.370154 62.758763) (xy 154.393052 62.76239) (xy 154.3987 62.768038) (xy 154.406298 62.770507) - (xy 154.419925 62.789263) (xy 154.436317 62.805655) (xy 154.437566 62.813544) (xy 154.442262 62.820007) - (xy 154.442262 62.843192) (xy 154.445888 62.866087) (xy 154.442262 62.873203) (xy 154.442262 62.881193) - (xy 154.418112 62.920601) (xy 154.40113 62.937584) (xy 154.322073 63.074516) (xy 154.28115 63.227243) - (xy 154.28115 63.385357) (xy 154.322073 63.538084) (xy 154.40113 63.675016) (xy 154.512934 63.78682) - (xy 154.649866 63.865877) (xy 154.802593 63.9068) (xy 154.802595 63.9068) (xy 154.960705 63.9068) - (xy 154.960707 63.9068) (xy 155.113434 63.865877) (xy 155.250366 63.78682) (xy 155.36217 63.675016) - (xy 155.385505 63.634598) (xy 155.430972 63.593659) (xy 155.491822 63.587262) (xy 155.54481 63.617854) - (xy 155.556977 63.634599) (xy 155.558872 63.637882) (xy 155.558873 63.637884) (xy 155.63793 63.774816) - (xy 155.749734 63.88662) (xy 155.886666 63.965677) (xy 156.039393 64.0066) (xy 156.039395 64.0066) - (xy 156.197505 64.0066) (xy 156.197507 64.0066) (xy 156.350234 63.965677) (xy 156.487166 63.88662) - (xy 156.59897 63.774816) (xy 156.616737 63.744043) (xy 166.08365 63.744043) (xy 166.08365 63.902157) - (xy 166.124573 64.054884) (xy 166.20363 64.191816) (xy 166.315434 64.30362) (xy 166.452366 64.382677) - (xy 166.605093 64.4236) (xy 166.605095 64.4236) (xy 166.763205 64.4236) (xy 166.763207 64.4236) - (xy 166.915934 64.382677) (xy 167.052866 64.30362) (xy 167.16467 64.191816) (xy 167.243727 64.054884) - (xy 167.28465 63.902157) (xy 167.28465 63.744043) (xy 167.243727 63.591316) (xy 167.16467 63.454384) - (xy 167.052866 63.34258) (xy 166.915934 63.263523) (xy 166.763207 63.2226) (xy 166.605093 63.2226) - (xy 166.452366 63.263523) (xy 166.315434 63.34258) (xy 166.20363 63.454384) (xy 166.124573 63.591316) - (xy 166.08365 63.744043) (xy 156.616737 63.744043) (xy 156.678027 63.637884) (xy 156.71895 63.485157) - (xy 156.71895 63.327043) (xy 156.678027 63.174316) (xy 156.59897 63.037384) (xy 156.487166 62.92558) - (xy 156.487163 62.925578) (xy 156.482577 62.920992) (xy 156.484732 62.918836) (xy 156.457161 62.878749) - (xy 156.458743 62.817584) (xy 156.495974 62.76903) (xy 156.552075 62.7516) (xy 179.613149 62.7516) - (xy 179.67134 62.770507) (xy 179.707304 62.820007) (xy 179.707304 62.881193) (xy 179.683153 62.920604) - (xy 170.466453 72.137304) (xy 170.411936 72.165081) (xy 170.396449 72.1663) (xy 121.480677 72.1663) - (xy 121.375223 72.1663) (xy 121.312879 72.183004) (xy 121.273357 72.193594) (xy 121.182041 72.246316) - (xy 121.182036 72.24632) (xy 120.420096 73.008258) (xy 120.36558 73.036035) (xy 120.319501 73.032409) - (xy 120.161056 72.980928) (xy 119.982199 72.9526) (xy 119.982196 72.9526) (xy 119.87345 72.9526) - (xy 119.815259 72.933693) (xy 119.779295 72.884193) (xy 119.779295 72.823007) (xy 119.803446 72.783596) - (xy 123.622099 68.964943) (xy 147.06075 68.964943) (xy 147.06075 69.123057) (xy 147.101673 69.275784) - (xy 147.18073 69.412716) (xy 147.292534 69.52452) (xy 147.429466 69.603577) (xy 147.582193 69.6445) - (xy 147.582195 69.6445) (xy 147.740305 69.6445) (xy 147.740307 69.6445) (xy 147.893034 69.603577) - (xy 148.029966 69.52452) (xy 148.14177 69.412716) (xy 148.220827 69.275784) (xy 148.26175 69.123057) - (xy 148.26175 68.964943) (xy 148.220827 68.812216) (xy 148.14177 68.675284) (xy 148.029966 68.56348) - (xy 147.893034 68.484423) (xy 147.740307 68.4435) (xy 147.582193 68.4435) (xy 147.429466 68.484423) - (xy 147.292534 68.56348) (xy 147.18073 68.675284) (xy 147.101673 68.812216) (xy 147.06075 68.964943) - (xy 123.622099 68.964943) (xy 123.698592 68.88845) (xy 124.727636 67.859407) (xy 128.1967 64.390343) - (xy 152.49295 64.390343) (xy 152.49295 64.548457) (xy 152.533873 64.701184) (xy 152.61293 64.838116) - (xy 152.724734 64.94992) (xy 152.861666 65.028977) (xy 153.014393 65.0699) (xy 153.014395 65.0699) - (xy 153.172505 65.0699) (xy 153.172507 65.0699) (xy 153.325234 65.028977) (xy 153.462166 64.94992) - (xy 153.517643 64.894443) (xy 163.57535 64.894443) (xy 163.57535 65.052557) (xy 163.616273 65.205284) - (xy 163.69533 65.342216) (xy 163.807134 65.45402) (xy 163.944066 65.533077) (xy 164.096793 65.574) - (xy 164.096795 65.574) (xy 164.254905 65.574) (xy 164.254907 65.574) (xy 164.407634 65.533077) (xy 164.432981 65.518443) - (xy 169.23045 65.518443) (xy 169.23045 65.676557) (xy 169.271373 65.829284) (xy 169.35043 65.966216) - (xy 169.462234 66.07802) (xy 169.599166 66.157077) (xy 169.751893 66.198) (xy 169.751895 66.198) - (xy 169.910005 66.198) (xy 169.910007 66.198) (xy 170.062734 66.157077) (xy 170.199666 66.07802) - (xy 170.31147 65.966216) (xy 170.390527 65.829284) (xy 170.43145 65.676557) (xy 170.43145 65.518443) - (xy 170.390527 65.365716) (xy 170.31147 65.228784) (xy 170.199666 65.11698) (xy 170.062734 65.037923) - (xy 169.910007 64.997) (xy 169.751893 64.997) (xy 169.599166 65.037923) (xy 169.462234 65.11698) - (xy 169.35043 65.228784) (xy 169.271373 65.365716) (xy 169.23045 65.518443) (xy 164.432981 65.518443) - (xy 164.544566 65.45402) (xy 164.65637 65.342216) (xy 164.735427 65.205284) (xy 164.77635 65.052557) - (xy 164.77635 64.894443) (xy 164.735427 64.741716) (xy 164.65637 64.604784) (xy 164.544566 64.49298) - (xy 164.407634 64.413923) (xy 164.254907 64.373) (xy 164.096793 64.373) (xy 163.944066 64.413923) - (xy 163.807134 64.49298) (xy 163.69533 64.604784) (xy 163.616273 64.741716) (xy 163.57535 64.894443) - (xy 153.517643 64.894443) (xy 153.57397 64.838116) (xy 153.653027 64.701184) (xy 153.69395 64.548457) - (xy 153.69395 64.390343) (xy 153.653027 64.237616) (xy 153.57397 64.100684) (xy 153.462166 63.98888) - (xy 153.325234 63.909823) (xy 153.172507 63.8689) (xy 153.014393 63.8689) (xy 152.861666 63.909823) - (xy 152.724734 63.98888) (xy 152.61293 64.100684) (xy 152.533873 64.237616) (xy 152.49295 64.390343) - (xy 128.1967 64.390343) (xy 129.806447 62.780596) (xy 129.860964 62.752819) (xy 129.876451 62.7516) - (xy 154.348107 62.7516) + (xy 180.033472 62.620507) (xy 180.069436 62.670007) (xy 180.069436 62.731193) (xy 180.045285 62.770604) + (xy 170.528585 72.287304) (xy 170.474068 72.315081) (xy 170.458581 72.3163) (xy 121.378121 72.3163) + (xy 121.286053 72.354435) (xy 120.453672 73.186814) (xy 120.399156 73.214591) (xy 120.345784 73.208274) + (xy 120.183485 73.141049) (xy 119.990193 73.1026) (xy 119.990191 73.1026) (xy 119.793109 73.1026) + (xy 119.793106 73.1026) (xy 119.599815 73.141049) (xy 119.599813 73.141049) (xy 119.434915 73.209351) + (xy 119.373918 73.214151) (xy 119.321749 73.182182) (xy 119.298335 73.125654) (xy 119.312619 73.066159) + (xy 119.327018 73.047892) (xy 123.390219 68.984691) (xy 147.21075 68.984691) (xy 147.21075 69.103309) + (xy 147.233062 69.186577) (xy 147.241452 69.21789) (xy 147.300757 69.320608) (xy 147.300759 69.32061) + (xy 147.300761 69.320613) (xy 147.384637 69.404489) (xy 147.384639 69.40449) (xy 147.384641 69.404492) + (xy 147.48736 69.463797) (xy 147.487361 69.463797) (xy 147.487364 69.463799) (xy 147.601941 69.4945) + (xy 147.601943 69.4945) (xy 147.720557 69.4945) (xy 147.720559 69.4945) (xy 147.835136 69.463799) + (xy 147.835138 69.463797) (xy 147.83514 69.463797) (xy 147.937858 69.404492) (xy 147.937858 69.404491) + (xy 147.937863 69.404489) (xy 148.021739 69.320613) (xy 148.067882 69.240692) (xy 148.081047 69.21789) + (xy 148.081047 69.217888) (xy 148.081049 69.217886) (xy 148.11175 69.103309) (xy 148.11175 68.984691) + (xy 148.081049 68.870114) (xy 148.081047 68.870111) (xy 148.081047 68.870109) (xy 148.021742 68.767391) + (xy 148.02174 68.767389) (xy 148.021739 68.767387) (xy 147.937863 68.683511) (xy 147.93786 68.683509) + (xy 147.937858 68.683507) (xy 147.835139 68.624202) (xy 147.83514 68.624202) (xy 147.821601 68.620574) + (xy 147.720559 68.5935) (xy 147.601941 68.5935) (xy 147.531817 68.612289) (xy 147.487359 68.624202) + (xy 147.384641 68.683507) (xy 147.300757 68.767391) (xy 147.241452 68.870109) (xy 147.241451 68.870114) + (xy 147.21075 68.984691) (xy 123.390219 68.984691) (xy 126.83672 65.538191) (xy 169.38045 65.538191) + (xy 169.38045 65.656809) (xy 169.407079 65.756191) (xy 169.411152 65.77139) (xy 169.470457 65.874108) + (xy 169.470459 65.87411) (xy 169.470461 65.874113) (xy 169.554337 65.957989) (xy 169.554339 65.95799) + (xy 169.554341 65.957992) (xy 169.65706 66.017297) (xy 169.657061 66.017297) (xy 169.657064 66.017299) + (xy 169.771641 66.048) (xy 169.771643 66.048) (xy 169.890257 66.048) (xy 169.890259 66.048) (xy 170.004836 66.017299) + (xy 170.004838 66.017297) (xy 170.00484 66.017297) (xy 170.107558 65.957992) (xy 170.107558 65.957991) + (xy 170.107563 65.957989) (xy 170.191439 65.874113) (xy 170.21872 65.826861) (xy 170.250747 65.77139) + (xy 170.250747 65.771388) (xy 170.250749 65.771386) (xy 170.28145 65.656809) (xy 170.28145 65.538191) + (xy 170.250749 65.423614) (xy 170.250747 65.423611) (xy 170.250747 65.423609) (xy 170.191442 65.320891) + (xy 170.19144 65.320889) (xy 170.191439 65.320887) (xy 170.107563 65.237011) (xy 170.10756 65.237009) + (xy 170.107558 65.237007) (xy 170.004839 65.177702) (xy 170.00484 65.177702) (xy 169.991301 65.174074) + (xy 169.890259 65.147) (xy 169.771641 65.147) (xy 169.701517 65.165789) (xy 169.657059 65.177702) + (xy 169.554341 65.237007) (xy 169.470457 65.320891) (xy 169.411152 65.423609) (xy 169.400946 65.461698) + (xy 169.38045 65.538191) (xy 126.83672 65.538191) (xy 127.46072 64.914191) (xy 163.72535 64.914191) + (xy 163.72535 65.032809) (xy 163.727707 65.041604) (xy 163.756052 65.14739) (xy 163.815357 65.250108) + (xy 163.815359 65.25011) (xy 163.815361 65.250113) (xy 163.899237 65.333989) (xy 163.899239 65.33399) + (xy 163.899241 65.333992) (xy 164.00196 65.393297) (xy 164.001961 65.393297) (xy 164.001964 65.393299) + (xy 164.116541 65.424) (xy 164.116543 65.424) (xy 164.235157 65.424) (xy 164.235159 65.424) (xy 164.349736 65.393299) + (xy 164.349738 65.393297) (xy 164.34974 65.393297) (xy 164.452458 65.333992) (xy 164.452458 65.333991) + (xy 164.452463 65.333989) (xy 164.536339 65.250113) (xy 164.578146 65.177702) (xy 164.595647 65.14739) + (xy 164.595647 65.147388) (xy 164.595649 65.147386) (xy 164.62635 65.032809) (xy 164.62635 64.914191) + (xy 164.595649 64.799614) (xy 164.595647 64.799611) (xy 164.595647 64.799609) (xy 164.536342 64.696891) + (xy 164.53634 64.696889) (xy 164.536339 64.696887) (xy 164.452463 64.613011) (xy 164.45246 64.613009) + (xy 164.452458 64.613007) (xy 164.349739 64.553702) (xy 164.34974 64.553702) (xy 164.336201 64.550074) + (xy 164.235159 64.523) (xy 164.116541 64.523) (xy 164.046417 64.541789) (xy 164.001959 64.553702) + (xy 163.899241 64.613007) (xy 163.815357 64.696891) (xy 163.756052 64.799609) (xy 163.756051 64.799614) + (xy 163.72535 64.914191) (xy 127.46072 64.914191) (xy 128.23422 64.140691) (xy 153.1495 64.140691) + (xy 153.1495 64.259309) (xy 153.173935 64.3505) (xy 153.180202 64.37389) (xy 153.239507 64.476608) + (xy 153.239509 64.47661) (xy 153.239511 64.476613) (xy 153.323387 64.560489) (xy 153.323389 64.56049) + (xy 153.323391 64.560492) (xy 153.42611 64.619797) (xy 153.426111 64.619797) (xy 153.426114 64.619799) + (xy 153.540691 64.6505) (xy 153.540693 64.6505) (xy 153.659307 64.6505) (xy 153.659309 64.6505) + (xy 153.773886 64.619799) (xy 153.773888 64.619797) (xy 153.77389 64.619797) (xy 153.876608 64.560492) + (xy 153.876608 64.560491) (xy 153.876613 64.560489) (xy 153.960489 64.476613) (xy 154.019799 64.373886) + (xy 154.0505 64.259309) (xy 154.0505 64.140691) (xy 154.019799 64.026114) (xy 154.019797 64.026111) + (xy 154.019797 64.026109) (xy 153.960492 63.923391) (xy 153.96049 63.923389) (xy 153.960489 63.923387) + (xy 153.877793 63.840691) (xy 156.3495 63.840691) (xy 156.3495 63.959309) (xy 156.376574 64.060351) + (xy 156.380202 64.07389) (xy 156.439507 64.176608) (xy 156.439509 64.17661) (xy 156.439511 64.176613) + (xy 156.523387 64.260489) (xy 156.523389 64.26049) (xy 156.523391 64.260492) (xy 156.62611 64.319797) + (xy 156.626111 64.319797) (xy 156.626114 64.319799) (xy 156.740691 64.3505) (xy 156.740693 64.3505) + (xy 156.859307 64.3505) (xy 156.859309 64.3505) (xy 156.973886 64.319799) (xy 156.973888 64.319797) + (xy 156.97389 64.319797) (xy 157.076608 64.260492) (xy 157.076608 64.260491) (xy 157.076613 64.260489) + (xy 157.160489 64.176613) (xy 157.219799 64.073886) (xy 157.2505 63.959309) (xy 157.2505 63.840691) + (xy 157.229895 63.763791) (xy 166.23365 63.763791) (xy 166.23365 63.882409) (xy 166.260724 63.983451) + (xy 166.264352 63.99699) (xy 166.323657 64.099708) (xy 166.323659 64.09971) (xy 166.323661 64.099713) + (xy 166.407537 64.183589) (xy 166.407539 64.18359) (xy 166.407541 64.183592) (xy 166.51026 64.242897) + (xy 166.510261 64.242897) (xy 166.510264 64.242899) (xy 166.624841 64.2736) (xy 166.624843 64.2736) + (xy 166.743457 64.2736) (xy 166.743459 64.2736) (xy 166.858036 64.242899) (xy 166.858038 64.242897) + (xy 166.85804 64.242897) (xy 166.960758 64.183592) (xy 166.960758 64.183591) (xy 166.960763 64.183589) + (xy 167.044639 64.099713) (xy 167.059548 64.07389) (xy 167.103947 63.99699) (xy 167.103947 63.996988) + (xy 167.103949 63.996986) (xy 167.13465 63.882409) (xy 167.13465 63.763791) (xy 167.103949 63.649214) + (xy 167.103947 63.649211) (xy 167.103947 63.649209) (xy 167.044642 63.546491) (xy 167.04464 63.546489) + (xy 167.044639 63.546487) (xy 166.960763 63.462611) (xy 166.96076 63.462609) (xy 166.960758 63.462607) + (xy 166.858039 63.403302) (xy 166.85804 63.403302) (xy 166.844501 63.399674) (xy 166.743459 63.3726) + (xy 166.624841 63.3726) (xy 166.554717 63.391389) (xy 166.510259 63.403302) (xy 166.407541 63.462607) + (xy 166.323657 63.546491) (xy 166.264352 63.649209) (xy 166.264217 63.649713) (xy 166.23365 63.763791) + (xy 157.229895 63.763791) (xy 157.219799 63.726114) (xy 157.219797 63.726111) (xy 157.219797 63.726109) + (xy 157.160492 63.623391) (xy 157.16049 63.623389) (xy 157.160489 63.623387) (xy 157.076613 63.539511) + (xy 157.07661 63.539509) (xy 157.076608 63.539507) (xy 156.973889 63.480202) (xy 156.97389 63.480202) + (xy 156.946743 63.472928) (xy 156.859309 63.4495) (xy 156.740691 63.4495) (xy 156.670567 63.468289) + (xy 156.626109 63.480202) (xy 156.523391 63.539507) (xy 156.439507 63.623391) (xy 156.380202 63.726109) + (xy 156.370105 63.763791) (xy 156.3495 63.840691) (xy 153.877793 63.840691) (xy 153.876613 63.839511) + (xy 153.87661 63.839509) (xy 153.876608 63.839507) (xy 153.773889 63.780202) (xy 153.77389 63.780202) + (xy 153.760351 63.776574) (xy 153.659309 63.7495) (xy 153.540691 63.7495) (xy 153.487357 63.763791) + (xy 153.426109 63.780202) (xy 153.323391 63.839507) (xy 153.239507 63.923391) (xy 153.180202 64.026109) + (xy 153.180201 64.026114) (xy 153.1495 64.140691) (xy 128.23422 64.140691) (xy 129.06112 63.313791) + (xy 154.2995 63.313791) (xy 154.2995 63.432409) (xy 154.30408 63.4495) (xy 154.330202 63.54699) + (xy 154.389507 63.649708) (xy 154.389509 63.64971) (xy 154.389511 63.649713) (xy 154.473387 63.733589) + (xy 154.473389 63.73359) (xy 154.473391 63.733592) (xy 154.57611 63.792897) (xy 154.576111 63.792897) + (xy 154.576114 63.792899) (xy 154.690691 63.8236) (xy 154.690693 63.8236) (xy 154.809307 63.8236) + (xy 154.809309 63.8236) (xy 154.923886 63.792899) (xy 154.923888 63.792897) (xy 154.92389 63.792897) + (xy 155.000837 63.748471) (xy 155.000846 63.748466) (xy 155.007982 63.744345) (xy 155.026613 63.733589) + (xy 155.110489 63.649713) (xy 155.125686 63.623391) (xy 155.169797 63.54699) (xy 155.169797 63.546988) + (xy 155.169799 63.546986) (xy 155.2005 63.432409) (xy 155.2005 63.313791) (xy 155.169799 63.199214) + (xy 155.169797 63.199211) (xy 155.169797 63.199209) (xy 155.110492 63.096491) (xy 155.11049 63.096489) + (xy 155.110489 63.096487) (xy 155.026613 63.012611) (xy 155.02661 63.012609) (xy 155.026608 63.012607) + (xy 154.923889 62.953302) (xy 154.92389 62.953302) (xy 154.910351 62.949674) (xy 154.809309 62.9226) + (xy 154.690691 62.9226) (xy 154.620567 62.941389) (xy 154.576109 62.953302) (xy 154.473391 63.012607) + (xy 154.389507 63.096491) (xy 154.330202 63.199209) (xy 154.330201 63.199214) (xy 154.2995 63.313791) + (xy 129.06112 63.313791) (xy 129.744315 62.630596) (xy 129.798832 62.602819) (xy 129.814319 62.6016) + (xy 179.975281 62.6016) ) ) (filled_polygon @@ -45505,23 +51540,63 @@ (xy 85.312937 137.1736) (xy 85.312938 137.1736) (xy 85.553439 137.141938) (xy 85.78775 137.079154) (xy 86.011862 136.986324) (xy 86.221939 136.865036) (xy 86.414388 136.717365) (xy 86.585915 136.545838) (xy 86.733586 136.353389) (xy 86.854874 136.143312) (xy 86.947704 135.9192) (xy 87.010488 135.684889) - (xy 87.04215 135.444388) (xy 87.04215 135.201812) (xy 87.010488 134.961311) (xy 86.947704 134.727) - (xy 86.854874 134.502888) (xy 86.733586 134.292811) (xy 86.585915 134.100362) (xy 86.414388 133.928835) - (xy 86.414383 133.928831) (xy 86.414381 133.928829) (xy 86.221942 133.781166) (xy 86.18369 133.759081) - (xy 86.011862 133.659876) (xy 86.011858 133.659874) (xy 86.011854 133.659872) (xy 85.787755 133.567048) - (xy 85.787754 133.567047) (xy 85.78775 133.567046) (xy 85.553439 133.504262) (xy 85.553436 133.504261) - (xy 85.553434 133.504261) (xy 85.312939 133.4726) (xy 85.312938 133.4726) (xy 85.070362 133.4726) - (xy 85.07036 133.4726) (xy 84.829868 133.504261) (xy 84.829863 133.504261) (xy 84.595557 133.567044) - (xy 84.595544 133.567048) (xy 84.371445 133.659872) (xy 84.161357 133.781166) (xy 83.968918 133.928829) - (xy 83.797379 134.100368) (xy 83.649716 134.292807) (xy 83.528422 134.502895) (xy 83.435598 134.726994) - (xy 83.435594 134.727007) (xy 83.372811 134.961313) (xy 83.372811 134.961318) (xy 83.34115 135.20181) - (xy 80.857322 135.20181) (xy 80.854823 132.729993) (xy 171.09115 132.729993) (xy 171.09115 134.916206) - (xy 171.101773 135.004665) (xy 171.157287 135.145439) (xy 171.157288 135.145441) (xy 171.157289 135.145442) - (xy 171.248728 135.266022) (xy 171.369308 135.357461) (xy 171.369309 135.357461) (xy 171.36931 135.357462) - (xy 171.437088 135.38419) (xy 171.510086 135.412977) (xy 171.598548 135.4236) (xy 171.59855 135.4236) - (xy 173.78475 135.4236) (xy 173.784752 135.4236) (xy 173.873214 135.412977) (xy 174.013992 135.357461) - (xy 174.134572 135.266022) (xy 174.226011 135.145442) (xy 174.281527 135.004664) (xy 174.29215 134.916202) - (xy 174.29215 133.705121) (xy 175.89165 133.705121) (xy 175.89165 133.941078) (xy 175.922448 134.175008) + (xy 87.029472 135.540691) (xy 141.4495 135.540691) (xy 141.4495 135.659309) (xy 141.476574 135.760351) + (xy 141.480202 135.77389) (xy 141.539507 135.876608) (xy 141.539509 135.87661) (xy 141.539511 135.876613) + (xy 141.623387 135.960489) (xy 141.623389 135.96049) (xy 141.623391 135.960492) (xy 141.72611 136.019797) + (xy 141.726111 136.019797) (xy 141.726114 136.019799) (xy 141.840691 136.0505) (xy 141.840693 136.0505) + (xy 141.959307 136.0505) (xy 141.959309 136.0505) (xy 142.073886 136.019799) (xy 142.073888 136.019797) + (xy 142.07389 136.019797) (xy 142.176608 135.960492) (xy 142.176608 135.960491) (xy 142.176613 135.960489) + (xy 142.260489 135.876613) (xy 142.319799 135.773886) (xy 142.3505 135.659309) (xy 142.3505 135.540691) + (xy 142.319799 135.426114) (xy 142.319797 135.426111) (xy 142.319797 135.426109) (xy 142.260492 135.323391) + (xy 142.26049 135.323389) (xy 142.260489 135.323387) (xy 142.176613 135.239511) (xy 142.17661 135.239509) + (xy 142.176608 135.239507) (xy 142.073889 135.180202) (xy 142.07389 135.180202) (xy 142.060351 135.176574) + (xy 141.959309 135.1495) (xy 141.840691 135.1495) (xy 141.774149 135.16733) (xy 141.726109 135.180202) + (xy 141.623391 135.239507) (xy 141.539507 135.323391) (xy 141.480202 135.426109) (xy 141.475304 135.444388) + (xy 141.4495 135.540691) (xy 87.029472 135.540691) (xy 87.04215 135.444388) (xy 87.04215 135.201812) + (xy 87.010488 134.961311) (xy 86.947704 134.727) (xy 86.854874 134.502888) (xy 86.733586 134.292811) + (xy 86.585915 134.100362) (xy 86.414388 133.928835) (xy 86.414383 133.928831) (xy 86.414381 133.928829) + (xy 86.221942 133.781166) (xy 86.19349 133.764739) (xy 86.011862 133.659876) (xy 86.011858 133.659874) + (xy 86.011854 133.659872) (xy 85.787755 133.567048) (xy 85.787754 133.567047) (xy 85.78775 133.567046) + (xy 85.553439 133.504262) (xy 85.553436 133.504261) (xy 85.553434 133.504261) (xy 85.312939 133.4726) + (xy 85.312938 133.4726) (xy 85.070362 133.4726) (xy 85.07036 133.4726) (xy 84.829868 133.504261) + (xy 84.829863 133.504261) (xy 84.595557 133.567044) (xy 84.595544 133.567048) (xy 84.371445 133.659872) + (xy 84.161357 133.781166) (xy 83.968918 133.928829) (xy 83.797379 134.100368) (xy 83.649716 134.292807) + (xy 83.528422 134.502895) (xy 83.435598 134.726994) (xy 83.435594 134.727007) (xy 83.372811 134.961313) + (xy 83.372811 134.961318) (xy 83.34115 135.20181) (xy 80.857322 135.20181) (xy 80.855391 133.29143) + (xy 158.875 133.29143) (xy 158.875 133.534999) (xy 158.875001 133.535) (xy 159.525 133.535) (xy 159.525 134.035) + (xy 158.875001 134.035) (xy 158.875 134.035001) (xy 158.875 134.278569) (xy 158.911508 134.462104) + (xy 158.911508 134.462106) (xy 158.983118 134.634989) (xy 158.983124 134.635001) (xy 159.087087 134.790589) + (xy 159.08709 134.790593) (xy 159.219406 134.922909) (xy 159.21941 134.922912) (xy 159.374998 135.026875) + (xy 159.37501 135.026881) (xy 159.547888 135.098489) (xy 159.547899 135.098492) (xy 159.575 135.103882) + (xy 159.575 134.351988) (xy 159.58494 134.369205) (xy 159.640795 134.42506) (xy 159.709204 134.464556) + (xy 159.785504 134.485) (xy 159.864496 134.485) (xy 159.940796 134.464556) (xy 160.009205 134.42506) + (xy 160.06506 134.369205) (xy 160.075 134.351988) (xy 160.075 135.103881) (xy 160.1021 135.098492) + (xy 160.102111 135.098489) (xy 160.274989 135.026881) (xy 160.275001 135.026875) (xy 160.430589 134.922912) + (xy 160.430593 134.922909) (xy 160.562909 134.790593) (xy 160.562912 134.790589) (xy 160.666875 134.635001) + (xy 160.666881 134.634989) (xy 160.738491 134.462106) (xy 160.738491 134.462104) (xy 160.774999 134.278569) + (xy 160.775 134.278565) (xy 160.775 134.035001) (xy 160.774999 134.035) (xy 160.125 134.035) (xy 160.125 133.535) + (xy 160.774999 133.535) (xy 160.775 133.534999) (xy 160.775 133.291434) (xy 160.774999 133.29143) + (xy 167.525 133.29143) (xy 167.525 133.534999) (xy 167.525001 133.535) (xy 168.175 133.535) (xy 168.175 134.035) + (xy 167.525001 134.035) (xy 167.525 134.035001) (xy 167.525 134.278569) (xy 167.561508 134.462104) + (xy 167.561508 134.462106) (xy 167.633118 134.634989) (xy 167.633124 134.635001) (xy 167.737087 134.790589) + (xy 167.73709 134.790593) (xy 167.869406 134.922909) (xy 167.86941 134.922912) (xy 168.024998 135.026875) + (xy 168.02501 135.026881) (xy 168.197888 135.098489) (xy 168.197899 135.098492) (xy 168.225 135.103882) + (xy 168.225 134.351988) (xy 168.23494 134.369205) (xy 168.290795 134.42506) (xy 168.359204 134.464556) + (xy 168.435504 134.485) (xy 168.514496 134.485) (xy 168.590796 134.464556) (xy 168.659205 134.42506) + (xy 168.71506 134.369205) (xy 168.725 134.351988) (xy 168.725 135.103881) (xy 168.7521 135.098492) + (xy 168.752111 135.098489) (xy 168.924989 135.026881) (xy 168.925001 135.026875) (xy 169.080589 134.922912) + (xy 169.080593 134.922909) (xy 169.212909 134.790593) (xy 169.212912 134.790589) (xy 169.316875 134.635001) + (xy 169.316881 134.634989) (xy 169.388491 134.462106) (xy 169.388491 134.462104) (xy 169.424999 134.278569) + (xy 169.425 134.278565) (xy 169.425 134.035001) (xy 169.424999 134.035) (xy 168.775 134.035) (xy 168.775 133.535) + (xy 169.424999 133.535) (xy 169.425 133.534999) (xy 169.425 133.291434) (xy 169.424999 133.29143) + (xy 169.388491 133.107895) (xy 169.388491 133.107893) (xy 169.316881 132.93501) (xy 169.316875 132.934998) + (xy 169.221788 132.792693) (xy 169.212912 132.77941) (xy 169.212909 132.779406) (xy 169.175081 132.741578) + (xy 171.24115 132.741578) (xy 171.24115 134.904621) (xy 171.241151 134.904623) (xy 171.256002 134.998399) + (xy 171.256004 134.998404) (xy 171.3136 135.111442) (xy 171.403308 135.20115) (xy 171.516346 135.258746) + (xy 171.610131 135.2736) (xy 173.773168 135.273599) (xy 173.773171 135.273599) (xy 173.773172 135.273598) + (xy 173.820061 135.266172) (xy 173.866949 135.258747) (xy 173.866949 135.258746) (xy 173.866954 135.258746) + (xy 173.979992 135.20115) (xy 174.0697 135.111442) (xy 174.127296 134.998404) (xy 174.14215 134.904619) + (xy 174.142149 133.705121) (xy 175.89165 133.705121) (xy 175.89165 133.941078) (xy 175.922448 134.175008) (xy 175.922448 134.175013) (xy 175.983517 134.402924) (xy 175.983521 134.402937) (xy 176.073813 134.620924) (xy 176.073815 134.620929) (xy 176.191792 134.825269) (xy 176.25437 134.906824) (xy 177.090607 134.070586) (xy 177.115628 134.13099) (xy 177.186762 134.237451) (xy 177.277299 134.327988) (xy 177.38376 134.399122) @@ -45534,27 +51609,30 @@ (xy 178.196538 134.237451) (xy 178.267672 134.13099) (xy 178.292691 134.070587) (xy 179.128928 134.906824) (xy 179.19151 134.825265) (xy 179.309484 134.620929) (xy 179.309486 134.620924) (xy 179.399778 134.402937) (xy 179.399782 134.402924) (xy 179.460851 134.175013) (xy 179.460851 134.175008) (xy 179.491649 133.941078) - (xy 179.49165 133.941077) (xy 179.49165 133.705123) (xy 179.491649 133.70512) (xy 179.490598 133.697134) - (xy 181.09115 133.697134) (xy 181.09115 133.949065) (xy 181.130558 134.19788) (xy 181.208409 134.437479) - (xy 181.301878 134.620924) (xy 181.32278 134.661945) (xy 181.470857 134.865756) (xy 181.648994 135.043893) - (xy 181.852805 135.19197) (xy 182.077271 135.306341) (xy 182.316865 135.38419) (xy 182.316866 135.38419) - (xy 182.316869 135.384191) (xy 182.565685 135.4236) (xy 182.565688 135.4236) (xy 182.817615 135.4236) - (xy 183.06643 135.384191) (xy 183.066431 135.38419) (xy 183.066435 135.38419) (xy 183.306029 135.306341) - (xy 183.530495 135.19197) (xy 183.734306 135.043893) (xy 183.912443 134.865756) (xy 184.06052 134.661945) - (xy 184.174891 134.437479) (xy 184.25274 134.197885) (xy 184.256363 134.175013) (xy 184.29215 133.949065) - (xy 184.29215 133.697134) (xy 186.09115 133.697134) (xy 186.09115 133.949065) (xy 186.130558 134.19788) - (xy 186.208409 134.437479) (xy 186.301878 134.620924) (xy 186.32278 134.661945) (xy 186.470857 134.865756) - (xy 186.648994 135.043893) (xy 186.852805 135.19197) (xy 187.077271 135.306341) (xy 187.316865 135.38419) - (xy 187.316866 135.38419) (xy 187.316869 135.384191) (xy 187.565685 135.4236) (xy 187.565688 135.4236) - (xy 187.817615 135.4236) (xy 188.06643 135.384191) (xy 188.066431 135.38419) (xy 188.066435 135.38419) - (xy 188.306029 135.306341) (xy 188.530495 135.19197) (xy 188.734306 135.043893) (xy 188.912443 134.865756) - (xy 189.06052 134.661945) (xy 189.174891 134.437479) (xy 189.25274 134.197885) (xy 189.256363 134.175013) - (xy 189.29215 133.949065) (xy 189.29215 133.697134) (xy 191.09115 133.697134) (xy 191.09115 133.949065) - (xy 191.130558 134.19788) (xy 191.208409 134.437479) (xy 191.301878 134.620924) (xy 191.32278 134.661945) - (xy 191.470857 134.865756) (xy 191.648994 135.043893) (xy 191.852805 135.19197) (xy 192.077271 135.306341) - (xy 192.316865 135.38419) (xy 192.316866 135.38419) (xy 192.316869 135.384191) (xy 192.565685 135.4236) - (xy 192.565688 135.4236) (xy 192.817615 135.4236) (xy 193.06643 135.384191) (xy 193.066431 135.38419) - (xy 193.066435 135.38419) (xy 193.306029 135.306341) (xy 193.511183 135.20181) (xy 209.34115 135.20181) + (xy 179.49165 133.941077) (xy 179.49165 133.708939) (xy 181.24115 133.708939) (xy 181.24115 133.93726) + (xy 181.276864 134.162755) (xy 181.347419 134.379899) (xy 181.45107 134.583327) (xy 181.451074 134.583333) + (xy 181.585266 134.768031) (xy 181.585268 134.768033) (xy 181.585271 134.768037) (xy 181.746713 134.929479) + (xy 181.746716 134.929481) (xy 181.746718 134.929483) (xy 181.790528 134.961313) (xy 181.931422 135.063679) + (xy 182.134851 135.167331) (xy 182.35199 135.237884) (xy 182.351991 135.237884) (xy 182.351994 135.237885) + (xy 182.57749 135.2736) (xy 182.577493 135.2736) (xy 182.80581 135.2736) (xy 183.031305 135.237885) + (xy 183.031306 135.237884) (xy 183.03131 135.237884) (xy 183.248449 135.167331) (xy 183.451878 135.063679) + (xy 183.636587 134.929479) (xy 183.798029 134.768037) (xy 183.932229 134.583328) (xy 184.035881 134.379899) + (xy 184.106434 134.16276) (xy 184.126669 134.035) (xy 184.14215 133.93726) (xy 184.14215 133.708939) + (xy 186.24115 133.708939) (xy 186.24115 133.93726) (xy 186.276864 134.162755) (xy 186.347419 134.379899) + (xy 186.45107 134.583327) (xy 186.451074 134.583333) (xy 186.585266 134.768031) (xy 186.585268 134.768033) + (xy 186.585271 134.768037) (xy 186.746713 134.929479) (xy 186.746716 134.929481) (xy 186.746718 134.929483) + (xy 186.790528 134.961313) (xy 186.931422 135.063679) (xy 187.134851 135.167331) (xy 187.35199 135.237884) + (xy 187.351991 135.237884) (xy 187.351994 135.237885) (xy 187.57749 135.2736) (xy 187.577493 135.2736) + (xy 187.80581 135.2736) (xy 188.031305 135.237885) (xy 188.031306 135.237884) (xy 188.03131 135.237884) + (xy 188.248449 135.167331) (xy 188.451878 135.063679) (xy 188.636587 134.929479) (xy 188.798029 134.768037) + (xy 188.932229 134.583328) (xy 189.035881 134.379899) (xy 189.106434 134.16276) (xy 189.126669 134.035) + (xy 189.14215 133.93726) (xy 189.14215 133.708939) (xy 191.24115 133.708939) (xy 191.24115 133.93726) + (xy 191.276864 134.162755) (xy 191.347419 134.379899) (xy 191.45107 134.583327) (xy 191.451074 134.583333) + (xy 191.585266 134.768031) (xy 191.585268 134.768033) (xy 191.585271 134.768037) (xy 191.746713 134.929479) + (xy 191.746716 134.929481) (xy 191.746718 134.929483) (xy 191.790528 134.961313) (xy 191.931422 135.063679) + (xy 192.134851 135.167331) (xy 192.35199 135.237884) (xy 192.351991 135.237884) (xy 192.351994 135.237885) + (xy 192.57749 135.2736) (xy 192.577493 135.2736) (xy 192.80581 135.2736) (xy 193.031305 135.237885) + (xy 193.031306 135.237884) (xy 193.03131 135.237884) (xy 193.142334 135.20181) (xy 209.34115 135.20181) (xy 209.34115 135.444389) (xy 209.372811 135.684881) (xy 209.372811 135.684886) (xy 209.435594 135.919192) (xy 209.435598 135.919205) (xy 209.528422 136.143304) (xy 209.528424 136.143308) (xy 209.528426 136.143312) (xy 209.632227 136.3231) (xy 209.649716 136.353392) (xy 209.797379 136.545831) (xy 209.797381 136.545833) @@ -45566,71 +51644,69 @@ (xy 212.854874 136.143312) (xy 212.947704 135.9192) (xy 213.010488 135.684889) (xy 213.04215 135.444388) (xy 213.04215 135.201812) (xy 213.010488 134.961311) (xy 212.947704 134.727) (xy 212.854874 134.502888) (xy 212.733586 134.292811) (xy 212.585915 134.100362) (xy 212.414388 133.928835) (xy 212.414383 133.928831) - (xy 212.414381 133.928829) (xy 212.221942 133.781166) (xy 212.18369 133.759081) (xy 212.011862 133.659876) + (xy 212.414381 133.928829) (xy 212.221942 133.781166) (xy 212.19349 133.764739) (xy 212.011862 133.659876) (xy 212.011858 133.659874) (xy 212.011854 133.659872) (xy 211.787755 133.567048) (xy 211.787754 133.567047) (xy 211.78775 133.567046) (xy 211.553439 133.504262) (xy 211.553436 133.504261) (xy 211.553434 133.504261) (xy 211.312939 133.4726) (xy 211.312938 133.4726) (xy 211.070362 133.4726) (xy 211.07036 133.4726) (xy 210.829868 133.504261) (xy 210.829863 133.504261) (xy 210.595557 133.567044) (xy 210.595544 133.567048) (xy 210.371445 133.659872) (xy 210.161357 133.781166) (xy 209.968918 133.928829) (xy 209.797379 134.100368) (xy 209.649716 134.292807) (xy 209.528422 134.502895) (xy 209.435598 134.726994) (xy 209.435594 134.727007) - (xy 209.372811 134.961313) (xy 209.372811 134.961318) (xy 209.34115 135.20181) (xy 193.511183 135.20181) - (xy 193.530495 135.19197) (xy 193.734306 135.043893) (xy 193.912443 134.865756) (xy 194.06052 134.661945) - (xy 194.174891 134.437479) (xy 194.25274 134.197885) (xy 194.256363 134.175013) (xy 194.29215 133.949065) - (xy 194.29215 133.697134) (xy 194.252741 133.448319) (xy 194.187475 133.247451) (xy 194.186114 133.243262) - (xy 194.178797 133.220744) (xy 197.89115 133.220744) (xy 197.89115 133.425455) (xy 197.923171 133.627629) - (xy 197.98643 133.822319) (xy 198.079362 134.004709) (xy 198.079364 134.004713) (xy 198.199679 134.170313) - (xy 198.199681 134.170315) (xy 198.199684 134.170319) (xy 198.344431 134.315066) (xy 198.344434 134.315068) - (xy 198.344436 134.31507) (xy 198.510036 134.435385) (xy 198.51004 134.435387) (xy 198.692431 134.52832) - (xy 198.887116 134.591577) (xy 198.887117 134.591577) (xy 198.88712 134.591578) (xy 199.089295 134.6236) - (xy 199.089298 134.6236) (xy 199.294005 134.6236) (xy 199.496179 134.591578) (xy 199.49618 134.591577) - (xy 199.496184 134.591577) (xy 199.690869 134.52832) (xy 199.87326 134.435387) (xy 200.038869 134.315066) - (xy 200.183616 134.170319) (xy 200.26383 134.059913) (xy 200.303935 134.004713) (xy 200.303937 134.00471) - (xy 200.39687 133.822319) (xy 200.396874 133.822308) (xy 200.40672 133.792007) (xy 200.442684 133.742507) - (xy 200.500874 133.7236) (xy 204.382426 133.7236) (xy 204.440617 133.742507) (xy 204.47658 133.792007) - (xy 204.486425 133.822308) (xy 204.486428 133.822315) (xy 204.48643 133.822319) (xy 204.537743 133.923027) - (xy 204.579362 134.004709) (xy 204.579364 134.004713) (xy 204.699679 134.170313) (xy 204.699681 134.170315) - (xy 204.699684 134.170319) (xy 204.844431 134.315066) (xy 204.844434 134.315068) (xy 204.844436 134.31507) - (xy 205.010036 134.435385) (xy 205.01004 134.435387) (xy 205.192431 134.52832) (xy 205.387116 134.591577) - (xy 205.387117 134.591577) (xy 205.38712 134.591578) (xy 205.589295 134.6236) (xy 205.589298 134.6236) - (xy 205.794005 134.6236) (xy 205.996179 134.591578) (xy 205.99618 134.591577) (xy 205.996184 134.591577) - (xy 206.190869 134.52832) (xy 206.37326 134.435387) (xy 206.538869 134.315066) (xy 206.683616 134.170319) - (xy 206.76383 134.059913) (xy 206.803935 134.004713) (xy 206.803937 134.00471) (xy 206.89687 133.822319) - (xy 206.960127 133.627634) (xy 206.969723 133.567048) (xy 206.99215 133.425455) (xy 206.99215 133.220744) - (xy 206.960128 133.01857) (xy 206.948979 132.984257) (xy 206.89687 132.823881) (xy 206.803937 132.64149) - (xy 206.803935 132.641486) (xy 206.68362 132.475886) (xy 206.683618 132.475884) (xy 206.683616 132.475881) - (xy 206.538869 132.331134) (xy 206.538865 132.331131) (xy 206.538863 132.331129) (xy 206.373263 132.210814) - (xy 206.373259 132.210812) (xy 206.190869 132.11788) (xy 205.996179 132.054621) (xy 205.794005 132.0226) - (xy 205.794002 132.0226) (xy 205.589298 132.0226) (xy 205.589295 132.0226) (xy 205.38712 132.054621) - (xy 205.19243 132.11788) (xy 205.01004 132.210812) (xy 205.010036 132.210814) (xy 204.844436 132.331129) - (xy 204.699679 132.475886) (xy 204.579364 132.641486) (xy 204.579362 132.64149) (xy 204.486425 132.823891) - (xy 204.47658 132.854193) (xy 204.440616 132.903693) (xy 204.382426 132.9226) (xy 200.500874 132.9226) - (xy 200.442683 132.903693) (xy 200.40672 132.854193) (xy 200.396874 132.823891) (xy 200.396871 132.823886) - (xy 200.39687 132.823881) (xy 200.303937 132.64149) (xy 200.303935 132.641486) (xy 200.18362 132.475886) - (xy 200.183618 132.475884) (xy 200.183616 132.475881) (xy 200.038869 132.331134) (xy 200.038865 132.331131) - (xy 200.038863 132.331129) (xy 199.873263 132.210814) (xy 199.873259 132.210812) (xy 199.690869 132.11788) - (xy 199.496179 132.054621) (xy 199.294005 132.0226) (xy 199.294002 132.0226) (xy 199.089298 132.0226) - (xy 199.089295 132.0226) (xy 198.88712 132.054621) (xy 198.69243 132.11788) (xy 198.51004 132.210812) - (xy 198.510036 132.210814) (xy 198.344436 132.331129) (xy 198.199679 132.475886) (xy 198.079364 132.641486) - (xy 198.079362 132.64149) (xy 197.98643 132.82388) (xy 197.923171 133.01857) (xy 197.89115 133.220744) - (xy 194.178797 133.220744) (xy 194.174891 133.208721) (xy 194.06052 132.984255) (xy 193.912443 132.780444) - (xy 193.734306 132.602307) (xy 193.530495 132.45423) (xy 193.530494 132.454229) (xy 193.530492 132.454228) - (xy 193.306029 132.339859) (xy 193.06643 132.262008) (xy 192.817615 132.2226) (xy 192.817612 132.2226) - (xy 192.565688 132.2226) (xy 192.565685 132.2226) (xy 192.316869 132.262008) (xy 192.07727 132.339859) - (xy 191.852807 132.454228) (xy 191.648995 132.602306) (xy 191.470856 132.780445) (xy 191.322778 132.984257) - (xy 191.208409 133.20872) (xy 191.130558 133.448319) (xy 191.09115 133.697134) (xy 189.29215 133.697134) - (xy 189.252741 133.448319) (xy 189.239884 133.408749) (xy 189.174891 133.208721) (xy 189.06052 132.984255) - (xy 188.912443 132.780444) (xy 188.734306 132.602307) (xy 188.530495 132.45423) (xy 188.530494 132.454229) - (xy 188.530492 132.454228) (xy 188.306029 132.339859) (xy 188.06643 132.262008) (xy 187.817615 132.2226) - (xy 187.817612 132.2226) (xy 187.565688 132.2226) (xy 187.565685 132.2226) (xy 187.316869 132.262008) - (xy 187.07727 132.339859) (xy 186.852807 132.454228) (xy 186.648995 132.602306) (xy 186.470856 132.780445) - (xy 186.322778 132.984257) (xy 186.208409 133.20872) (xy 186.130558 133.448319) (xy 186.09115 133.697134) - (xy 184.29215 133.697134) (xy 184.252741 133.448319) (xy 184.239884 133.408749) (xy 184.174891 133.208721) - (xy 184.06052 132.984255) (xy 183.912443 132.780444) (xy 183.734306 132.602307) (xy 183.530495 132.45423) - (xy 183.530494 132.454229) (xy 183.530492 132.454228) (xy 183.306029 132.339859) (xy 183.06643 132.262008) - (xy 182.817615 132.2226) (xy 182.817612 132.2226) (xy 182.565688 132.2226) (xy 182.565685 132.2226) - (xy 182.316869 132.262008) (xy 182.07727 132.339859) (xy 181.852807 132.454228) (xy 181.648995 132.602306) - (xy 181.470856 132.780445) (xy 181.322778 132.984257) (xy 181.208409 133.20872) (xy 181.130558 133.448319) - (xy 181.09115 133.697134) (xy 179.490598 133.697134) (xy 179.460851 133.471191) (xy 179.460851 133.471186) + (xy 209.372811 134.961313) (xy 209.372811 134.961318) (xy 209.34115 135.20181) (xy 193.142334 135.20181) + (xy 193.248449 135.167331) (xy 193.451878 135.063679) (xy 193.636587 134.929479) (xy 193.798029 134.768037) + (xy 193.932229 134.583328) (xy 194.035881 134.379899) (xy 194.106434 134.16276) (xy 194.126669 134.035) + (xy 194.14215 133.93726) (xy 194.14215 133.708939) (xy 194.106435 133.483444) (xy 194.082165 133.408749) + (xy 194.035881 133.266301) (xy 194.018684 133.23255) (xy 198.04115 133.23255) (xy 198.04115 133.413649) + (xy 198.069478 133.592506) (xy 198.1236 133.759081) (xy 198.125439 133.764739) (xy 198.207654 133.926094) + (xy 198.314097 134.072601) (xy 198.442149 134.200653) (xy 198.588656 134.307096) (xy 198.750011 134.389311) + (xy 198.922241 134.445271) (xy 198.993786 134.456602) (xy 199.101101 134.4736) (xy 199.101104 134.4736) + (xy 199.282199 134.4736) (xy 199.371627 134.459435) (xy 199.461059 134.445271) (xy 199.633289 134.389311) + (xy 199.794644 134.307096) (xy 199.941151 134.200653) (xy 200.069203 134.072601) (xy 200.175646 133.926094) + (xy 200.257861 133.764739) (xy 200.297738 133.642007) (xy 200.333702 133.592508) (xy 200.391892 133.5736) + (xy 204.491407 133.5736) (xy 204.549598 133.592507) (xy 204.585562 133.642007) (xy 204.585562 133.642008) + (xy 204.6236 133.759081) (xy 204.625439 133.764739) (xy 204.707654 133.926094) (xy 204.814097 134.072601) + (xy 204.942149 134.200653) (xy 205.088656 134.307096) (xy 205.250011 134.389311) (xy 205.422241 134.445271) + (xy 205.493786 134.456602) (xy 205.601101 134.4736) (xy 205.601104 134.4736) (xy 205.782199 134.4736) + (xy 205.871627 134.459435) (xy 205.961059 134.445271) (xy 206.133289 134.389311) (xy 206.294644 134.307096) + (xy 206.441151 134.200653) (xy 206.569203 134.072601) (xy 206.675646 133.926094) (xy 206.757861 133.764739) + (xy 206.813821 133.592509) (xy 206.84215 133.413646) (xy 206.84215 133.232554) (xy 206.84215 133.23255) + (xy 206.813821 133.053693) (xy 206.813821 133.053692) (xy 206.813821 133.053691) (xy 206.757861 132.881461) + (xy 206.675646 132.720106) (xy 206.569203 132.573599) (xy 206.441151 132.445547) (xy 206.294644 132.339104) + (xy 206.294643 132.339103) (xy 206.294641 132.339102) (xy 206.133287 132.256888) (xy 205.961056 132.200928) + (xy 205.782199 132.1726) (xy 205.782196 132.1726) (xy 205.601104 132.1726) (xy 205.601101 132.1726) + (xy 205.422243 132.200928) (xy 205.250012 132.256888) (xy 205.088658 132.339102) (xy 205.042552 132.3726) + (xy 204.942149 132.445547) (xy 204.814097 132.573599) (xy 204.807616 132.58252) (xy 204.707652 132.720108) + (xy 204.625438 132.881462) (xy 204.585562 133.004192) (xy 204.549598 133.053692) (xy 204.491408 133.0726) + (xy 200.391893 133.0726) (xy 200.333702 133.053693) (xy 200.297738 133.004193) (xy 200.297738 133.004192) + (xy 200.257861 132.881462) (xy 200.257861 132.881461) (xy 200.175646 132.720106) (xy 200.069203 132.573599) + (xy 199.941151 132.445547) (xy 199.794644 132.339104) (xy 199.794643 132.339103) (xy 199.794641 132.339102) + (xy 199.633287 132.256888) (xy 199.461056 132.200928) (xy 199.282199 132.1726) (xy 199.282196 132.1726) + (xy 199.101104 132.1726) (xy 199.101101 132.1726) (xy 198.922243 132.200928) (xy 198.750012 132.256888) + (xy 198.588658 132.339102) (xy 198.542552 132.3726) (xy 198.442149 132.445547) (xy 198.314097 132.573599) + (xy 198.307616 132.58252) (xy 198.207652 132.720108) (xy 198.125438 132.881462) (xy 198.069478 133.053693) + (xy 198.04115 133.23255) (xy 194.018684 133.23255) (xy 193.932229 133.062872) (xy 193.92556 133.053693) + (xy 193.798033 132.878168) (xy 193.798031 132.878166) (xy 193.798029 132.878163) (xy 193.636587 132.716721) + (xy 193.636583 132.716718) (xy 193.636581 132.716716) (xy 193.451883 132.582524) (xy 193.451877 132.58252) + (xy 193.248449 132.478869) (xy 193.031305 132.408314) (xy 192.80581 132.3726) (xy 192.805807 132.3726) + (xy 192.577493 132.3726) (xy 192.57749 132.3726) (xy 192.351994 132.408314) (xy 192.13485 132.478869) + (xy 191.931422 132.58252) (xy 191.931416 132.582524) (xy 191.746718 132.716716) (xy 191.585266 132.878168) + (xy 191.451074 133.062866) (xy 191.45107 133.062872) (xy 191.347419 133.2663) (xy 191.276864 133.483444) + (xy 191.24115 133.708939) (xy 189.14215 133.708939) (xy 189.106435 133.483444) (xy 189.082165 133.408749) + (xy 189.035881 133.266301) (xy 188.932229 133.062872) (xy 188.92556 133.053693) (xy 188.798033 132.878168) + (xy 188.798031 132.878166) (xy 188.798029 132.878163) (xy 188.636587 132.716721) (xy 188.636583 132.716718) + (xy 188.636581 132.716716) (xy 188.451883 132.582524) (xy 188.451877 132.58252) (xy 188.248449 132.478869) + (xy 188.031305 132.408314) (xy 187.80581 132.3726) (xy 187.805807 132.3726) (xy 187.577493 132.3726) + (xy 187.57749 132.3726) (xy 187.351994 132.408314) (xy 187.13485 132.478869) (xy 186.931422 132.58252) + (xy 186.931416 132.582524) (xy 186.746718 132.716716) (xy 186.585266 132.878168) (xy 186.451074 133.062866) + (xy 186.45107 133.062872) (xy 186.347419 133.2663) (xy 186.276864 133.483444) (xy 186.24115 133.708939) + (xy 184.14215 133.708939) (xy 184.106435 133.483444) (xy 184.082165 133.408749) (xy 184.035881 133.266301) + (xy 183.932229 133.062872) (xy 183.92556 133.053693) (xy 183.798033 132.878168) (xy 183.798031 132.878166) + (xy 183.798029 132.878163) (xy 183.636587 132.716721) (xy 183.636583 132.716718) (xy 183.636581 132.716716) + (xy 183.451883 132.582524) (xy 183.451877 132.58252) (xy 183.248449 132.478869) (xy 183.031305 132.408314) + (xy 182.80581 132.3726) (xy 182.805807 132.3726) (xy 182.577493 132.3726) (xy 182.57749 132.3726) + (xy 182.351994 132.408314) (xy 182.13485 132.478869) (xy 181.931422 132.58252) (xy 181.931416 132.582524) + (xy 181.746718 132.716716) (xy 181.585266 132.878168) (xy 181.451074 133.062866) (xy 181.45107 133.062872) + (xy 181.347419 133.2663) (xy 181.276864 133.483444) (xy 181.24115 133.708939) (xy 179.49165 133.708939) + (xy 179.49165 133.705123) (xy 179.491649 133.705121) (xy 179.460851 133.471191) (xy 179.460851 133.471186) (xy 179.399782 133.243275) (xy 179.399778 133.243262) (xy 179.309486 133.025275) (xy 179.309484 133.02527) (xy 179.191507 132.82093) (xy 179.128928 132.739374) (xy 178.292691 133.57561) (xy 178.267672 133.51521) (xy 178.196538 133.408749) (xy 178.106001 133.318212) (xy 177.99954 133.247078) (xy 177.939136 133.222057) @@ -45642,54 +51718,69 @@ (xy 177.277299 133.318212) (xy 177.186762 133.408749) (xy 177.115628 133.51521) (xy 177.090608 133.575612) (xy 176.25437 132.739374) (xy 176.191791 132.820931) (xy 176.073815 133.02527) (xy 176.073813 133.025275) (xy 175.983521 133.243262) (xy 175.983517 133.243275) (xy 175.922448 133.471186) (xy 175.922448 133.471191) - (xy 175.89165 133.705121) (xy 174.29215 133.705121) (xy 174.29215 132.729998) (xy 174.281527 132.641536) - (xy 174.226011 132.500758) (xy 174.134572 132.380178) (xy 174.013992 132.288739) (xy 174.013991 132.288738) - (xy 174.013989 132.288737) (xy 173.873215 132.233223) (xy 173.784756 132.2226) (xy 173.784752 132.2226) - (xy 171.598548 132.2226) (xy 171.598543 132.2226) (xy 171.510084 132.233223) (xy 171.36931 132.288737) - (xy 171.369306 132.28874) (xy 171.248731 132.380175) (xy 171.248725 132.380181) (xy 171.15729 132.500756) - (xy 171.157287 132.50076) (xy 171.101773 132.641534) (xy 171.09115 132.729993) (xy 80.854823 132.729993) - (xy 80.854429 132.339859) (xy 80.852728 130.656501) (xy 80.850789 128.73823) (xy 114.15115 128.73823) - (xy 114.15115 130.42796) (xy 114.151151 130.427963) (xy 114.154064 130.45309) (xy 114.179406 130.510485) - (xy 114.199444 130.555865) (xy 114.278885 130.635306) (xy 114.381659 130.680685) (xy 114.406785 130.6836) - (xy 116.096514 130.683599) (xy 116.121641 130.680685) (xy 116.224415 130.635306) (xy 116.303856 130.555865) - (xy 116.349235 130.453091) (xy 116.35215 130.427965) (xy 116.352149 129.496485) (xy 116.69115 129.496485) - (xy 116.69115 129.669714) (xy 116.718247 129.840802) (xy 116.718248 129.840806) (xy 116.771773 130.005538) - (xy 116.771775 130.005541) (xy 116.833763 130.127202) (xy 116.850418 130.159888) (xy 116.952236 130.300028) - (xy 117.074722 130.422514) (xy 117.214862 130.524332) (xy 117.369205 130.602973) (xy 117.369207 130.602973) - (xy 117.369208 130.602974) (xy 117.369211 130.602976) (xy 117.533943 130.656501) (xy 117.533947 130.656502) - (xy 117.705036 130.6836) (xy 117.705039 130.6836) (xy 117.878264 130.6836) (xy 118.049352 130.656502) - (xy 118.049356 130.656501) (xy 118.214088 130.602976) (xy 118.21409 130.602974) (xy 118.214095 130.602973) - (xy 118.368438 130.524332) (xy 118.508578 130.422514) (xy 118.631064 130.300028) (xy 118.732882 130.159888) - (xy 118.811523 130.005545) (xy 118.811524 130.00554) (xy 118.811526 130.005538) (xy 118.865051 129.840806) - (xy 118.865052 129.840802) (xy 118.89215 129.669714) (xy 118.89215 129.496485) (xy 119.23115 129.496485) - (xy 119.23115 129.669714) (xy 119.258247 129.840802) (xy 119.258248 129.840806) (xy 119.311773 130.005538) - (xy 119.311775 130.005541) (xy 119.373763 130.127202) (xy 119.390418 130.159888) (xy 119.492236 130.300028) - (xy 119.614722 130.422514) (xy 119.754862 130.524332) (xy 119.909205 130.602973) (xy 119.909207 130.602973) - (xy 119.909208 130.602974) (xy 119.909211 130.602976) (xy 120.073943 130.656501) (xy 120.073947 130.656502) - (xy 120.245036 130.6836) (xy 120.245039 130.6836) (xy 120.418264 130.6836) (xy 120.589352 130.656502) - (xy 120.589356 130.656501) (xy 120.754088 130.602976) (xy 120.75409 130.602974) (xy 120.754095 130.602973) - (xy 120.908438 130.524332) (xy 121.048578 130.422514) (xy 121.171064 130.300028) (xy 121.272882 130.159888) - (xy 121.351523 130.005545) (xy 121.351524 130.00554) (xy 121.351526 130.005538) (xy 121.405051 129.840806) - (xy 121.405052 129.840802) (xy 121.43215 129.669714) (xy 121.43215 129.496485) (xy 121.77115 129.496485) - (xy 121.77115 129.669714) (xy 121.798247 129.840802) (xy 121.798248 129.840806) (xy 121.851773 130.005538) - (xy 121.851775 130.005541) (xy 121.913763 130.127202) (xy 121.930418 130.159888) (xy 122.032236 130.300028) - (xy 122.154722 130.422514) (xy 122.294862 130.524332) (xy 122.449205 130.602973) (xy 122.449207 130.602973) - (xy 122.449208 130.602974) (xy 122.449211 130.602976) (xy 122.613943 130.656501) (xy 122.613947 130.656502) - (xy 122.785036 130.6836) (xy 122.785039 130.6836) (xy 122.958264 130.6836) (xy 123.129352 130.656502) - (xy 123.129356 130.656501) (xy 123.294088 130.602976) (xy 123.29409 130.602974) (xy 123.294095 130.602973) - (xy 123.448438 130.524332) (xy 123.588578 130.422514) (xy 123.711064 130.300028) (xy 123.812882 130.159888) - (xy 123.891523 130.005545) (xy 123.891524 130.00554) (xy 123.891526 130.005538) (xy 123.945051 129.840806) - (xy 123.945052 129.840802) (xy 123.97215 129.669714) (xy 123.97215 129.496485) (xy 124.31115 129.496485) - (xy 124.31115 129.669714) (xy 124.338247 129.840802) (xy 124.338248 129.840806) (xy 124.391773 130.005538) - (xy 124.391775 130.005541) (xy 124.453763 130.127202) (xy 124.470418 130.159888) (xy 124.572236 130.300028) - (xy 124.694722 130.422514) (xy 124.834862 130.524332) (xy 124.989205 130.602973) (xy 124.989207 130.602973) - (xy 124.989208 130.602974) (xy 124.989211 130.602976) (xy 125.153943 130.656501) (xy 125.153947 130.656502) - (xy 125.325036 130.6836) (xy 125.325039 130.6836) (xy 125.498264 130.6836) (xy 125.669352 130.656502) - (xy 125.669356 130.656501) (xy 125.834088 130.602976) (xy 125.83409 130.602974) (xy 125.834095 130.602973) - (xy 125.988438 130.524332) (xy 126.128578 130.422514) (xy 126.251064 130.300028) (xy 126.352882 130.159888) - (xy 126.431523 130.005545) (xy 126.485052 129.840801) (xy 126.485052 129.840798) (xy 126.486171 129.837356) - (xy 126.522135 129.787856) (xy 126.580326 129.768949) (xy 126.638517 129.787856) (xy 126.674481 129.837356) - (xy 126.678107 129.852461) (xy 126.683659 129.887513) (xy 126.746893 130.082127) (xy 126.839788 130.264446) + (xy 175.89165 133.705121) (xy 174.142149 133.705121) (xy 174.142149 132.741582) (xy 174.142149 132.741581) + (xy 174.142149 132.741578) (xy 174.142148 132.741576) (xy 174.127297 132.6478) (xy 174.127296 132.647798) + (xy 174.127296 132.647796) (xy 174.0697 132.534758) (xy 173.979992 132.44505) (xy 173.866954 132.387454) + (xy 173.866955 132.387454) (xy 173.773171 132.3726) (xy 171.610128 132.3726) (xy 171.610126 132.372601) + (xy 171.51635 132.387452) (xy 171.516345 132.387454) (xy 171.403309 132.445049) (xy 171.313599 132.534759) + (xy 171.256004 132.647795) (xy 171.24115 132.741578) (xy 169.175081 132.741578) (xy 169.080593 132.64709) + (xy 169.080589 132.647087) (xy 168.925001 132.543124) (xy 168.924992 132.54312) (xy 168.752105 132.471508) + (xy 168.725 132.466116) (xy 168.725 133.218011) (xy 168.71506 133.200795) (xy 168.659205 133.14494) + (xy 168.590796 133.105444) (xy 168.514496 133.085) (xy 168.435504 133.085) (xy 168.359204 133.105444) + (xy 168.290795 133.14494) (xy 168.23494 133.200795) (xy 168.225 133.218011) (xy 168.225 132.466116) + (xy 168.197894 132.471508) (xy 168.025007 132.54312) (xy 168.024998 132.543124) (xy 167.86941 132.647087) + (xy 167.869406 132.64709) (xy 167.73709 132.779406) (xy 167.737087 132.77941) (xy 167.633124 132.934998) + (xy 167.633118 132.93501) (xy 167.561508 133.107893) (xy 167.561508 133.107895) (xy 167.525 133.29143) + (xy 160.774999 133.29143) (xy 160.738491 133.107895) (xy 160.738491 133.107893) (xy 160.666881 132.93501) + (xy 160.666875 132.934998) (xy 160.562912 132.77941) (xy 160.562909 132.779406) (xy 160.430593 132.64709) + (xy 160.430589 132.647087) (xy 160.275001 132.543124) (xy 160.274992 132.54312) (xy 160.102105 132.471508) + (xy 160.075 132.466116) (xy 160.075 133.218011) (xy 160.06506 133.200795) (xy 160.009205 133.14494) + (xy 159.940796 133.105444) (xy 159.864496 133.085) (xy 159.785504 133.085) (xy 159.709204 133.105444) + (xy 159.640795 133.14494) (xy 159.58494 133.200795) (xy 159.575 133.218011) (xy 159.575 132.466116) + (xy 159.547894 132.471508) (xy 159.375007 132.54312) (xy 159.374998 132.543124) (xy 159.21941 132.647087) + (xy 159.219406 132.64709) (xy 159.08709 132.779406) (xy 159.087087 132.77941) (xy 158.983124 132.934998) + (xy 158.983118 132.93501) (xy 158.911508 133.107893) (xy 158.911508 133.107895) (xy 158.875 133.29143) + (xy 80.855391 133.29143) (xy 80.850819 128.768272) (xy 114.30115 128.768272) (xy 114.30115 130.397927) + (xy 114.309882 130.44182) (xy 114.309884 130.441824) (xy 114.327167 130.46769) (xy 114.343146 130.491604) + (xy 114.392928 130.524867) (xy 114.403977 130.527064) (xy 114.436822 130.533599) (xy 114.436828 130.533599) + (xy 114.43683 130.5336) (xy 114.436831 130.5336) (xy 116.066469 130.5336) (xy 116.06647 130.5336) + (xy 116.066471 130.533599) (xy 116.066477 130.533599) (xy 116.088273 130.529262) (xy 116.110372 130.524867) + (xy 116.160154 130.491604) (xy 116.193417 130.441822) (xy 116.20215 130.39792) (xy 116.20215 129.489481) + (xy 116.84115 129.489481) (xy 116.84115 129.676718) (xy 116.877676 129.860349) (xy 116.949327 130.033329) + (xy 116.949331 130.033338) (xy 117.023715 130.144659) (xy 117.053348 130.189008) (xy 117.185742 130.321402) + (xy 117.252113 130.365749) (xy 117.341411 130.425418) (xy 117.341417 130.42542) (xy 117.341419 130.425422) + (xy 117.514399 130.497073) (xy 117.698034 130.5336) (xy 117.698035 130.5336) (xy 117.885265 130.5336) + (xy 117.885266 130.5336) (xy 118.068901 130.497073) (xy 118.241881 130.425422) (xy 118.241884 130.425419) + (xy 118.241888 130.425418) (xy 118.286837 130.395382) (xy 118.397558 130.321402) (xy 118.529952 130.189008) + (xy 118.623486 130.049025) (xy 118.633968 130.033338) (xy 118.633969 130.033334) (xy 118.633972 130.033331) + (xy 118.705623 129.860351) (xy 118.74215 129.676716) (xy 118.74215 129.489484) (xy 118.742149 129.489481) + (xy 119.38115 129.489481) (xy 119.38115 129.676718) (xy 119.417676 129.860349) (xy 119.489327 130.033329) + (xy 119.489331 130.033338) (xy 119.563715 130.144659) (xy 119.593348 130.189008) (xy 119.725742 130.321402) + (xy 119.792113 130.365749) (xy 119.881411 130.425418) (xy 119.881417 130.42542) (xy 119.881419 130.425422) + (xy 120.054399 130.497073) (xy 120.238034 130.5336) (xy 120.238035 130.5336) (xy 120.425265 130.5336) + (xy 120.425266 130.5336) (xy 120.608901 130.497073) (xy 120.781881 130.425422) (xy 120.781884 130.425419) + (xy 120.781888 130.425418) (xy 120.826837 130.395382) (xy 120.937558 130.321402) (xy 121.069952 130.189008) + (xy 121.163486 130.049025) (xy 121.173968 130.033338) (xy 121.173969 130.033334) (xy 121.173972 130.033331) + (xy 121.245623 129.860351) (xy 121.28215 129.676716) (xy 121.28215 129.489484) (xy 121.282149 129.489481) + (xy 121.92115 129.489481) (xy 121.92115 129.676718) (xy 121.957676 129.860349) (xy 122.029327 130.033329) + (xy 122.029331 130.033338) (xy 122.103715 130.144659) (xy 122.133348 130.189008) (xy 122.265742 130.321402) + (xy 122.332113 130.365749) (xy 122.421411 130.425418) (xy 122.421417 130.42542) (xy 122.421419 130.425422) + (xy 122.594399 130.497073) (xy 122.778034 130.5336) (xy 122.778035 130.5336) (xy 122.965265 130.5336) + (xy 122.965266 130.5336) (xy 123.148901 130.497073) (xy 123.321881 130.425422) (xy 123.321884 130.425419) + (xy 123.321888 130.425418) (xy 123.366837 130.395382) (xy 123.477558 130.321402) (xy 123.609952 130.189008) + (xy 123.703486 130.049025) (xy 123.713968 130.033338) (xy 123.713969 130.033334) (xy 123.713972 130.033331) + (xy 123.785623 129.860351) (xy 123.82215 129.676716) (xy 123.82215 129.489484) (xy 123.822149 129.489481) + (xy 124.46115 129.489481) (xy 124.46115 129.676718) (xy 124.497676 129.860349) (xy 124.569327 130.033329) + (xy 124.569331 130.033338) (xy 124.643715 130.144659) (xy 124.673348 130.189008) (xy 124.805742 130.321402) + (xy 124.872113 130.365749) (xy 124.961411 130.425418) (xy 124.961417 130.42542) (xy 124.961419 130.425422) + (xy 125.134399 130.497073) (xy 125.318034 130.5336) (xy 125.318035 130.5336) (xy 125.505265 130.5336) + (xy 125.505266 130.5336) (xy 125.688901 130.497073) (xy 125.861881 130.425422) (xy 125.861884 130.425419) + (xy 125.861888 130.425418) (xy 125.906837 130.395382) (xy 126.017558 130.321402) (xy 126.149952 130.189008) + (xy 126.243486 130.049025) (xy 126.253968 130.033338) (xy 126.253969 130.033334) (xy 126.253972 130.033331) + (xy 126.325623 129.860351) (xy 126.36215 129.676716) (xy 126.36215 129.489484) (xy 126.331043 129.333099) + (xy 126.67504 129.333099) (xy 126.675041 129.3331) (xy 127.518638 129.3331) (xy 127.485725 129.390107) + (xy 127.45165 129.517274) (xy 127.45165 129.648926) (xy 127.485725 129.776093) (xy 127.518638 129.8331) + (xy 126.67504 129.8331) (xy 126.683659 129.887514) (xy 126.746893 130.082127) (xy 126.839788 130.264446) (xy 126.960064 130.429991) (xy 127.104758 130.574685) (xy 127.270303 130.694961) (xy 127.452622 130.787856) (xy 127.647239 130.851091) (xy 127.647235 130.851091) (xy 127.701649 130.859708) (xy 127.70165 130.859707) (xy 127.70165 130.016112) (xy 127.758657 130.049025) (xy 127.885824 130.0831) (xy 128.017476 130.0831) @@ -45702,665 +51793,1197 @@ (xy 130.298657 130.049025) (xy 130.425824 130.0831) (xy 130.557476 130.0831) (xy 130.684643 130.049025) (xy 130.74165 130.016112) (xy 130.74165 130.859708) (xy 130.796062 130.851091) (xy 130.990677 130.787856) (xy 131.172996 130.694961) (xy 131.338541 130.574685) (xy 131.483235 130.429991) (xy 131.603511 130.264446) - (xy 131.696406 130.082127) (xy 131.759641 129.887511) (xy 131.765192 129.852464) (xy 131.792968 129.797947) - (xy 131.847484 129.770168) (xy 131.907917 129.779739) (xy 131.951182 129.823002) (xy 131.957127 129.837356) - (xy 132.011773 130.005538) (xy 132.011775 130.005541) (xy 132.073763 130.127202) (xy 132.090418 130.159888) - (xy 132.192236 130.300028) (xy 132.314722 130.422514) (xy 132.454862 130.524332) (xy 132.609205 130.602973) - (xy 132.609207 130.602973) (xy 132.609208 130.602974) (xy 132.609211 130.602976) (xy 132.773943 130.656501) - (xy 132.773947 130.656502) (xy 132.945036 130.6836) (xy 132.945039 130.6836) (xy 133.118264 130.6836) - (xy 133.289352 130.656502) (xy 133.289356 130.656501) (xy 133.454088 130.602976) (xy 133.45409 130.602974) - (xy 133.454095 130.602973) (xy 133.608438 130.524332) (xy 133.748578 130.422514) (xy 133.871064 130.300028) - (xy 133.972882 130.159888) (xy 134.051523 130.005545) (xy 134.051524 130.00554) (xy 134.051526 130.005538) - (xy 134.105051 129.840806) (xy 134.105052 129.840802) (xy 134.13215 129.669714) (xy 134.13215 129.496485) - (xy 137.01115 129.496485) (xy 137.01115 129.669714) (xy 137.038247 129.840802) (xy 137.038248 129.840806) - (xy 137.091773 130.005538) (xy 137.091775 130.005541) (xy 137.153763 130.127202) (xy 137.170418 130.159888) - (xy 137.272236 130.300028) (xy 137.394722 130.422514) (xy 137.534862 130.524332) (xy 137.689205 130.602973) - (xy 137.689207 130.602973) (xy 137.689208 130.602974) (xy 137.689211 130.602976) (xy 137.853943 130.656501) - (xy 137.853947 130.656502) (xy 138.025036 130.6836) (xy 138.025039 130.6836) (xy 138.198264 130.6836) - (xy 138.369352 130.656502) (xy 138.369356 130.656501) (xy 138.534088 130.602976) (xy 138.53409 130.602974) - (xy 138.534095 130.602973) (xy 138.688438 130.524332) (xy 138.828578 130.422514) (xy 138.951064 130.300028) - (xy 139.052882 130.159888) (xy 139.131523 130.005545) (xy 139.131524 130.00554) (xy 139.131526 130.005538) - (xy 139.185051 129.840806) (xy 139.185052 129.840802) (xy 139.21215 129.669714) (xy 139.21215 129.496485) - (xy 139.55115 129.496485) (xy 139.55115 129.669714) (xy 139.578247 129.840802) (xy 139.578248 129.840806) - (xy 139.631773 130.005538) (xy 139.631775 130.005541) (xy 139.693763 130.127202) (xy 139.710418 130.159888) - (xy 139.812236 130.300028) (xy 139.934722 130.422514) (xy 140.074862 130.524332) (xy 140.229205 130.602973) - (xy 140.229207 130.602973) (xy 140.229208 130.602974) (xy 140.229211 130.602976) (xy 140.393943 130.656501) - (xy 140.393947 130.656502) (xy 140.565036 130.6836) (xy 140.565039 130.6836) (xy 140.738264 130.6836) - (xy 140.909352 130.656502) (xy 140.909356 130.656501) (xy 141.074088 130.602976) (xy 141.07409 130.602974) - (xy 141.074095 130.602973) (xy 141.228438 130.524332) (xy 141.368578 130.422514) (xy 141.491064 130.300028) - (xy 141.592882 130.159888) (xy 141.671523 130.005545) (xy 141.671524 130.00554) (xy 141.671526 130.005538) - (xy 141.725051 129.840806) (xy 141.725052 129.840802) (xy 141.75215 129.669714) (xy 141.75215 129.496485) - (xy 142.09115 129.496485) (xy 142.09115 129.669714) (xy 142.118247 129.840802) (xy 142.118248 129.840806) - (xy 142.171773 130.005538) (xy 142.171775 130.005541) (xy 142.233763 130.127202) (xy 142.250418 130.159888) - (xy 142.352236 130.300028) (xy 142.474722 130.422514) (xy 142.614862 130.524332) (xy 142.769205 130.602973) - (xy 142.769207 130.602973) (xy 142.769208 130.602974) (xy 142.769211 130.602976) (xy 142.933943 130.656501) - (xy 142.933947 130.656502) (xy 143.105036 130.6836) (xy 143.105039 130.6836) (xy 143.278264 130.6836) - (xy 143.449352 130.656502) (xy 143.449356 130.656501) (xy 143.614088 130.602976) (xy 143.61409 130.602974) - (xy 143.614095 130.602973) (xy 143.768438 130.524332) (xy 143.908578 130.422514) (xy 144.031064 130.300028) - (xy 144.132882 130.159888) (xy 144.211523 130.005545) (xy 144.211524 130.00554) (xy 144.211526 130.005538) - (xy 144.265051 129.840806) (xy 144.265052 129.840802) (xy 144.29215 129.669714) (xy 144.29215 129.496485) - (xy 144.63115 129.496485) (xy 144.63115 129.669714) (xy 144.658247 129.840802) (xy 144.658248 129.840806) - (xy 144.711773 130.005538) (xy 144.711775 130.005541) (xy 144.773763 130.127202) (xy 144.790418 130.159888) - (xy 144.892236 130.300028) (xy 145.014722 130.422514) (xy 145.154862 130.524332) (xy 145.309205 130.602973) - (xy 145.309207 130.602973) (xy 145.309208 130.602974) (xy 145.309211 130.602976) (xy 145.473943 130.656501) - (xy 145.473947 130.656502) (xy 145.645036 130.6836) (xy 145.645039 130.6836) (xy 145.818264 130.6836) - (xy 145.989352 130.656502) (xy 145.989356 130.656501) (xy 146.154088 130.602976) (xy 146.15409 130.602974) - (xy 146.154095 130.602973) (xy 146.308438 130.524332) (xy 146.448578 130.422514) (xy 146.571064 130.300028) - (xy 146.672882 130.159888) (xy 146.751523 130.005545) (xy 146.751524 130.00554) (xy 146.751526 130.005538) - (xy 146.805051 129.840806) (xy 146.805052 129.840802) (xy 146.83215 129.669714) (xy 146.83215 129.496485) - (xy 147.17115 129.496485) (xy 147.17115 129.669714) (xy 147.198247 129.840802) (xy 147.198248 129.840806) - (xy 147.251773 130.005538) (xy 147.251775 130.005541) (xy 147.313763 130.127202) (xy 147.330418 130.159888) - (xy 147.432236 130.300028) (xy 147.554722 130.422514) (xy 147.694862 130.524332) (xy 147.849205 130.602973) - (xy 147.849207 130.602973) (xy 147.849208 130.602974) (xy 147.849211 130.602976) (xy 148.013943 130.656501) - (xy 148.013947 130.656502) (xy 148.185036 130.6836) (xy 148.185039 130.6836) (xy 148.358264 130.6836) - (xy 148.529352 130.656502) (xy 148.529356 130.656501) (xy 148.694088 130.602976) (xy 148.69409 130.602974) - (xy 148.694095 130.602973) (xy 148.848438 130.524332) (xy 148.988578 130.422514) (xy 149.111064 130.300028) - (xy 149.212882 130.159888) (xy 149.291523 130.005545) (xy 149.291524 130.00554) (xy 149.291526 130.005538) - (xy 149.345051 129.840806) (xy 149.345052 129.840802) (xy 149.37215 129.669714) (xy 149.37215 129.496485) - (xy 149.71115 129.496485) (xy 149.71115 129.669714) (xy 149.738247 129.840802) (xy 149.738248 129.840806) - (xy 149.791773 130.005538) (xy 149.791775 130.005541) (xy 149.853763 130.127202) (xy 149.870418 130.159888) - (xy 149.972236 130.300028) (xy 150.094722 130.422514) (xy 150.234862 130.524332) (xy 150.389205 130.602973) - (xy 150.389207 130.602973) (xy 150.389208 130.602974) (xy 150.389211 130.602976) (xy 150.553943 130.656501) - (xy 150.553947 130.656502) (xy 150.725036 130.6836) (xy 150.725039 130.6836) (xy 150.898264 130.6836) - (xy 151.069352 130.656502) (xy 151.069356 130.656501) (xy 151.234088 130.602976) (xy 151.23409 130.602974) - (xy 151.234095 130.602973) (xy 151.388438 130.524332) (xy 151.528578 130.422514) (xy 151.651064 130.300028) - (xy 151.752882 130.159888) (xy 151.831523 130.005545) (xy 151.831524 130.00554) (xy 151.831526 130.005538) - (xy 151.885051 129.840806) (xy 151.885052 129.840802) (xy 151.91215 129.669714) (xy 151.91215 129.496485) - (xy 151.885052 129.325397) (xy 151.885051 129.325393) (xy 151.831526 129.160661) (xy 151.831524 129.160658) - (xy 151.831523 129.160657) (xy 151.831523 129.160655) (xy 151.752882 129.006312) (xy 151.651064 128.866172) - (xy 151.528578 128.743686) (xy 151.388438 128.641868) (xy 151.388437 128.641867) (xy 151.388435 128.641866) - (xy 151.234091 128.563225) (xy 151.234088 128.563223) (xy 151.069356 128.509698) (xy 151.069352 128.509697) - (xy 150.898264 128.4826) (xy 150.898261 128.4826) (xy 150.725039 128.4826) (xy 150.725036 128.4826) - (xy 150.553947 128.509697) (xy 150.553943 128.509698) (xy 150.389211 128.563223) (xy 150.389208 128.563225) - (xy 150.234864 128.641866) (xy 150.094723 128.743685) (xy 149.972235 128.866173) (xy 149.870416 129.006314) - (xy 149.791775 129.160658) (xy 149.791773 129.160661) (xy 149.738248 129.325393) (xy 149.738247 129.325397) - (xy 149.71115 129.496485) (xy 149.37215 129.496485) (xy 149.345052 129.325397) (xy 149.345051 129.325393) - (xy 149.291526 129.160661) (xy 149.291524 129.160658) (xy 149.291523 129.160657) (xy 149.291523 129.160655) - (xy 149.212882 129.006312) (xy 149.111064 128.866172) (xy 148.988578 128.743686) (xy 148.848438 128.641868) - (xy 148.848437 128.641867) (xy 148.848435 128.641866) (xy 148.694091 128.563225) (xy 148.694088 128.563223) - (xy 148.529356 128.509698) (xy 148.529352 128.509697) (xy 148.358264 128.4826) (xy 148.358261 128.4826) - (xy 148.185039 128.4826) (xy 148.185036 128.4826) (xy 148.013947 128.509697) (xy 148.013943 128.509698) - (xy 147.849211 128.563223) (xy 147.849208 128.563225) (xy 147.694864 128.641866) (xy 147.554723 128.743685) - (xy 147.432235 128.866173) (xy 147.330416 129.006314) (xy 147.251775 129.160658) (xy 147.251773 129.160661) - (xy 147.198248 129.325393) (xy 147.198247 129.325397) (xy 147.17115 129.496485) (xy 146.83215 129.496485) - (xy 146.805052 129.325397) (xy 146.805051 129.325393) (xy 146.751526 129.160661) (xy 146.751524 129.160658) - (xy 146.751523 129.160657) (xy 146.751523 129.160655) (xy 146.672882 129.006312) (xy 146.571064 128.866172) - (xy 146.448578 128.743686) (xy 146.308438 128.641868) (xy 146.308437 128.641867) (xy 146.308435 128.641866) - (xy 146.154091 128.563225) (xy 146.154088 128.563223) (xy 145.989356 128.509698) (xy 145.989352 128.509697) - (xy 145.818264 128.4826) (xy 145.818261 128.4826) (xy 145.645039 128.4826) (xy 145.645036 128.4826) - (xy 145.473947 128.509697) (xy 145.473943 128.509698) (xy 145.309211 128.563223) (xy 145.309208 128.563225) - (xy 145.154864 128.641866) (xy 145.014723 128.743685) (xy 144.892235 128.866173) (xy 144.790416 129.006314) - (xy 144.711775 129.160658) (xy 144.711773 129.160661) (xy 144.658248 129.325393) (xy 144.658247 129.325397) - (xy 144.63115 129.496485) (xy 144.29215 129.496485) (xy 144.265052 129.325397) (xy 144.265051 129.325393) - (xy 144.211526 129.160661) (xy 144.211524 129.160658) (xy 144.211523 129.160657) (xy 144.211523 129.160655) - (xy 144.132882 129.006312) (xy 144.031064 128.866172) (xy 143.908578 128.743686) (xy 143.768438 128.641868) - (xy 143.768437 128.641867) (xy 143.768435 128.641866) (xy 143.614091 128.563225) (xy 143.614088 128.563223) - (xy 143.449356 128.509698) (xy 143.449352 128.509697) (xy 143.278264 128.4826) (xy 143.278261 128.4826) - (xy 143.105039 128.4826) (xy 143.105036 128.4826) (xy 142.933947 128.509697) (xy 142.933943 128.509698) - (xy 142.769211 128.563223) (xy 142.769208 128.563225) (xy 142.614864 128.641866) (xy 142.474723 128.743685) - (xy 142.352235 128.866173) (xy 142.250416 129.006314) (xy 142.171775 129.160658) (xy 142.171773 129.160661) - (xy 142.118248 129.325393) (xy 142.118247 129.325397) (xy 142.09115 129.496485) (xy 141.75215 129.496485) - (xy 141.725052 129.325397) (xy 141.725051 129.325393) (xy 141.671526 129.160661) (xy 141.671524 129.160658) - (xy 141.671523 129.160657) (xy 141.671523 129.160655) (xy 141.592882 129.006312) (xy 141.491064 128.866172) - (xy 141.368578 128.743686) (xy 141.228438 128.641868) (xy 141.228437 128.641867) (xy 141.228435 128.641866) - (xy 141.074091 128.563225) (xy 141.074088 128.563223) (xy 140.909356 128.509698) (xy 140.909352 128.509697) - (xy 140.738264 128.4826) (xy 140.738261 128.4826) (xy 140.565039 128.4826) (xy 140.565036 128.4826) - (xy 140.393947 128.509697) (xy 140.393943 128.509698) (xy 140.229211 128.563223) (xy 140.229208 128.563225) - (xy 140.074864 128.641866) (xy 139.934723 128.743685) (xy 139.812235 128.866173) (xy 139.710416 129.006314) - (xy 139.631775 129.160658) (xy 139.631773 129.160661) (xy 139.578248 129.325393) (xy 139.578247 129.325397) - (xy 139.55115 129.496485) (xy 139.21215 129.496485) (xy 139.185052 129.325397) (xy 139.185051 129.325393) - (xy 139.131526 129.160661) (xy 139.131524 129.160658) (xy 139.131523 129.160657) (xy 139.131523 129.160655) - (xy 139.052882 129.006312) (xy 138.951064 128.866172) (xy 138.828578 128.743686) (xy 138.688438 128.641868) - (xy 138.688437 128.641867) (xy 138.688435 128.641866) (xy 138.534091 128.563225) (xy 138.534088 128.563223) - (xy 138.369356 128.509698) (xy 138.369352 128.509697) (xy 138.198264 128.4826) (xy 138.198261 128.4826) - (xy 138.025039 128.4826) (xy 138.025036 128.4826) (xy 137.853947 128.509697) (xy 137.853943 128.509698) - (xy 137.689211 128.563223) (xy 137.689208 128.563225) (xy 137.534864 128.641866) (xy 137.394723 128.743685) - (xy 137.272235 128.866173) (xy 137.170416 129.006314) (xy 137.091775 129.160658) (xy 137.091773 129.160661) - (xy 137.038248 129.325393) (xy 137.038247 129.325397) (xy 137.01115 129.496485) (xy 134.13215 129.496485) - (xy 134.105052 129.325397) (xy 134.105051 129.325393) (xy 134.051526 129.160661) (xy 134.051524 129.160658) - (xy 134.051523 129.160657) (xy 134.051523 129.160655) (xy 133.972882 129.006312) (xy 133.871064 128.866172) - (xy 133.748578 128.743686) (xy 133.608438 128.641868) (xy 133.608437 128.641867) (xy 133.608435 128.641866) - (xy 133.454091 128.563225) (xy 133.454088 128.563223) (xy 133.289356 128.509698) (xy 133.289352 128.509697) - (xy 133.118264 128.4826) (xy 133.118261 128.4826) (xy 132.945039 128.4826) (xy 132.945036 128.4826) - (xy 132.773947 128.509697) (xy 132.773943 128.509698) (xy 132.609211 128.563223) (xy 132.609208 128.563225) - (xy 132.454864 128.641866) (xy 132.314723 128.743685) (xy 132.192235 128.866173) (xy 132.090416 129.006314) - (xy 132.011775 129.160658) (xy 132.011773 129.160661) (xy 131.957127 129.328843) (xy 131.921163 129.378343) - (xy 131.862972 129.39725) (xy 131.804782 129.378342) (xy 131.768818 129.328842) (xy 131.765192 129.313736) - (xy 131.759641 129.278687) (xy 131.696406 129.084072) (xy 131.603511 128.901753) (xy 131.483235 128.736208) - (xy 131.338541 128.591514) (xy 131.172996 128.471238) (xy 130.990677 128.378343) (xy 130.796064 128.315109) - (xy 130.74165 128.30649) (xy 130.74165 129.150088) (xy 130.684643 129.117175) (xy 130.557476 129.0831) - (xy 130.425824 129.0831) (xy 130.298657 129.117175) (xy 130.24165 129.150088) (xy 130.24165 128.306491) - (xy 130.241649 128.30649) (xy 130.187235 128.315109) (xy 129.992622 128.378343) (xy 129.810303 128.471238) - (xy 129.644758 128.591514) (xy 129.500064 128.736208) (xy 129.379788 128.901753) (xy 129.30986 129.038997) - (xy 129.266595 129.082262) (xy 129.206163 129.091833) (xy 129.151647 129.064056) (xy 129.13344 129.038997) - (xy 129.063511 128.901753) (xy 128.943235 128.736208) (xy 128.798541 128.591514) (xy 128.632996 128.471238) - (xy 128.450677 128.378343) (xy 128.256064 128.315109) (xy 128.20165 128.30649) (xy 128.20165 129.150088) - (xy 128.144643 129.117175) (xy 128.017476 129.0831) (xy 127.885824 129.0831) (xy 127.758657 129.117175) - (xy 127.70165 129.150088) (xy 127.70165 128.306491) (xy 127.701649 128.30649) (xy 127.647235 128.315109) - (xy 127.452622 128.378343) (xy 127.270303 128.471238) (xy 127.104758 128.591514) (xy 126.960064 128.736208) - (xy 126.839788 128.901753) (xy 126.746893 129.084072) (xy 126.683659 129.278686) (xy 126.678107 129.313738) - (xy 126.650329 129.368254) (xy 126.595812 129.396031) (xy 126.53538 129.386459) (xy 126.492116 129.343194) - (xy 126.486171 129.328843) (xy 126.469031 129.276093) (xy 126.431523 129.160655) (xy 126.352882 129.006312) - (xy 126.251064 128.866172) (xy 126.128578 128.743686) (xy 125.988438 128.641868) (xy 125.988437 128.641867) - (xy 125.988435 128.641866) (xy 125.834091 128.563225) (xy 125.834088 128.563223) (xy 125.669356 128.509698) - (xy 125.669352 128.509697) (xy 125.498264 128.4826) (xy 125.498261 128.4826) (xy 125.325039 128.4826) - (xy 125.325036 128.4826) (xy 125.153947 128.509697) (xy 125.153943 128.509698) (xy 124.989211 128.563223) - (xy 124.989208 128.563225) (xy 124.834864 128.641866) (xy 124.694723 128.743685) (xy 124.572235 128.866173) - (xy 124.470416 129.006314) (xy 124.391775 129.160658) (xy 124.391773 129.160661) (xy 124.338248 129.325393) - (xy 124.338247 129.325397) (xy 124.31115 129.496485) (xy 123.97215 129.496485) (xy 123.945052 129.325397) - (xy 123.945051 129.325393) (xy 123.891526 129.160661) (xy 123.891524 129.160658) (xy 123.891523 129.160657) - (xy 123.891523 129.160655) (xy 123.812882 129.006312) (xy 123.711064 128.866172) (xy 123.588578 128.743686) - (xy 123.448438 128.641868) (xy 123.448437 128.641867) (xy 123.448435 128.641866) (xy 123.294091 128.563225) - (xy 123.294088 128.563223) (xy 123.129356 128.509698) (xy 123.129352 128.509697) (xy 122.958264 128.4826) - (xy 122.958261 128.4826) (xy 122.785039 128.4826) (xy 122.785036 128.4826) (xy 122.613947 128.509697) - (xy 122.613943 128.509698) (xy 122.449211 128.563223) (xy 122.449208 128.563225) (xy 122.294864 128.641866) - (xy 122.154723 128.743685) (xy 122.032235 128.866173) (xy 121.930416 129.006314) (xy 121.851775 129.160658) - (xy 121.851773 129.160661) (xy 121.798248 129.325393) (xy 121.798247 129.325397) (xy 121.77115 129.496485) - (xy 121.43215 129.496485) (xy 121.405052 129.325397) (xy 121.405051 129.325393) (xy 121.351526 129.160661) - (xy 121.351524 129.160658) (xy 121.351523 129.160657) (xy 121.351523 129.160655) (xy 121.272882 129.006312) - (xy 121.171064 128.866172) (xy 121.048578 128.743686) (xy 120.908438 128.641868) (xy 120.908437 128.641867) - (xy 120.908435 128.641866) (xy 120.754091 128.563225) (xy 120.754088 128.563223) (xy 120.589356 128.509698) - (xy 120.589352 128.509697) (xy 120.418264 128.4826) (xy 120.418261 128.4826) (xy 120.245039 128.4826) - (xy 120.245036 128.4826) (xy 120.073947 128.509697) (xy 120.073943 128.509698) (xy 119.909211 128.563223) - (xy 119.909208 128.563225) (xy 119.754864 128.641866) (xy 119.614723 128.743685) (xy 119.492235 128.866173) - (xy 119.390416 129.006314) (xy 119.311775 129.160658) (xy 119.311773 129.160661) (xy 119.258248 129.325393) - (xy 119.258247 129.325397) (xy 119.23115 129.496485) (xy 118.89215 129.496485) (xy 118.865052 129.325397) - (xy 118.865051 129.325393) (xy 118.811526 129.160661) (xy 118.811524 129.160658) (xy 118.811523 129.160657) - (xy 118.811523 129.160655) (xy 118.732882 129.006312) (xy 118.631064 128.866172) (xy 118.508578 128.743686) - (xy 118.368438 128.641868) (xy 118.368437 128.641867) (xy 118.368435 128.641866) (xy 118.214091 128.563225) - (xy 118.214088 128.563223) (xy 118.049356 128.509698) (xy 118.049352 128.509697) (xy 117.878264 128.4826) - (xy 117.878261 128.4826) (xy 117.705039 128.4826) (xy 117.705036 128.4826) (xy 117.533947 128.509697) - (xy 117.533943 128.509698) (xy 117.369211 128.563223) (xy 117.369208 128.563225) (xy 117.214864 128.641866) - (xy 117.074723 128.743685) (xy 116.952235 128.866173) (xy 116.850416 129.006314) (xy 116.771775 129.160658) - (xy 116.771773 129.160661) (xy 116.718248 129.325393) (xy 116.718247 129.325397) (xy 116.69115 129.496485) - (xy 116.352149 129.496485) (xy 116.352149 128.738236) (xy 116.349235 128.713109) (xy 116.303856 128.610335) - (xy 116.224415 128.530894) (xy 116.121641 128.485515) (xy 116.12164 128.485514) (xy 116.121638 128.485514) - (xy 116.096518 128.4826) (xy 114.406789 128.4826) (xy 114.406786 128.482601) (xy 114.381659 128.485514) - (xy 114.278885 128.530894) (xy 114.199444 128.610335) (xy 114.154064 128.713111) (xy 114.15115 128.73823) - (xy 80.850789 128.73823) (xy 80.836912 115.010543) (xy 100.46975 115.010543) (xy 100.46975 115.168657) - (xy 100.510673 115.321384) (xy 100.58973 115.458316) (xy 100.701534 115.57012) (xy 100.838466 115.649177) - (xy 100.991193 115.6901) (xy 100.991195 115.6901) (xy 101.149305 115.6901) (xy 101.149307 115.6901) - (xy 101.302034 115.649177) (xy 101.438966 115.57012) (xy 101.55077 115.458316) (xy 101.629827 115.321384) - (xy 101.67075 115.168657) (xy 101.67075 115.010543) (xy 101.629827 114.857816) (xy 101.55077 114.720884) - (xy 101.438966 114.60908) (xy 101.302034 114.530023) (xy 101.149307 114.4891) (xy 100.991193 114.4891) - (xy 100.838466 114.530023) (xy 100.701534 114.60908) (xy 100.58973 114.720884) (xy 100.510673 114.857816) - (xy 100.46975 115.010543) (xy 80.836912 115.010543) (xy 80.835899 114.008143) (xy 169.13675 114.008143) - (xy 169.13675 114.166257) (xy 169.177673 114.318984) (xy 169.25673 114.455916) (xy 169.368534 114.56772) - (xy 169.505466 114.646777) (xy 169.658193 114.6877) (xy 169.730349 114.6877) (xy 169.78854 114.706607) - (xy 169.800353 114.716696) (xy 176.727237 121.64358) (xy 176.727239 121.643581) (xy 176.72724 121.643582) - (xy 176.727241 121.643583) (xy 176.818558 121.696305) (xy 176.818556 121.696305) (xy 176.81856 121.696306) - (xy 176.818562 121.696307) (xy 176.920423 121.7236) (xy 177.025877 121.7236) (xy 208.79215 121.7236) - (xy 208.850341 121.742507) (xy 208.886305 121.792007) (xy 208.89115 121.8226) (xy 208.89115 121.966206) - (xy 208.901773 122.054665) (xy 208.957287 122.195439) (xy 208.957288 122.195441) (xy 208.957289 122.195442) - (xy 209.048728 122.316022) (xy 209.169308 122.407461) (xy 209.169309 122.407461) (xy 209.16931 122.407462) - (xy 209.239697 122.435219) (xy 209.310086 122.462977) (xy 209.398548 122.4736) (xy 209.39855 122.4736) - (xy 210.98475 122.4736) (xy 210.984752 122.4736) (xy 211.073214 122.462977) (xy 211.213992 122.407461) - (xy 211.334572 122.316022) (xy 211.426011 122.195442) (xy 211.481527 122.054664) (xy 211.49215 121.966202) - (xy 211.49215 120.679998) (xy 211.481527 120.591536) (xy 211.426011 120.450758) (xy 211.334572 120.330178) - (xy 211.213992 120.238739) (xy 211.213991 120.238738) (xy 211.213989 120.238737) (xy 211.073216 120.183223) - (xy 211.050431 120.180487) (xy 210.99491 120.154775) (xy 210.965105 120.10134) (xy 210.972401 120.040591) - (xy 211.014011 119.995733) (xy 211.017292 119.993983) (xy 211.049199 119.977725) (xy 211.0492 119.977725) - (xy 211.221114 119.852822) (xy 211.371372 119.702564) (xy 211.496274 119.530652) (xy 211.592745 119.341315) - (xy 211.658408 119.139222) (xy 211.668881 119.0731) (xy 210.624662 119.0731) (xy 210.657575 119.016093) - (xy 210.69165 118.888926) (xy 210.69165 118.757274) (xy 210.657575 118.630107) (xy 210.624662 118.5731) - (xy 211.668881 118.5731) (xy 211.668881 118.573099) (xy 211.658408 118.506977) (xy 211.592745 118.304884) - (xy 211.496274 118.115547) (xy 211.371372 117.943635) (xy 211.221114 117.793377) (xy 211.049202 117.668475) - (xy 210.859865 117.572004) (xy 210.657771 117.50634) (xy 210.4479 117.4731) (xy 210.441651 117.4731) - (xy 210.44165 117.473101) (xy 210.44165 118.390088) (xy 210.384643 118.357175) (xy 210.257476 118.3231) - (xy 210.125824 118.3231) (xy 209.998657 118.357175) (xy 209.94165 118.390088) (xy 209.94165 117.473101) - (xy 209.941649 117.4731) (xy 209.9354 117.4731) (xy 209.725528 117.50634) (xy 209.523434 117.572004) - (xy 209.334097 117.668475) (xy 209.162185 117.793377) (xy 209.011927 117.943635) (xy 208.887025 118.115547) - (xy 208.790554 118.304884) (xy 208.724891 118.506977) (xy 208.714418 118.573099) (xy 208.714419 118.5731) - (xy 209.758638 118.5731) (xy 209.725725 118.630107) (xy 209.69165 118.757274) (xy 209.69165 118.888926) - (xy 209.725725 119.016093) (xy 209.758638 119.0731) (xy 208.714419 119.0731) (xy 208.724891 119.139222) - (xy 208.790554 119.341315) (xy 208.887025 119.530652) (xy 209.011927 119.702564) (xy 209.162185 119.852822) - (xy 209.334098 119.977724) (xy 209.366008 119.993983) (xy 209.409273 120.037248) (xy 209.418844 120.09768) - (xy 209.391067 120.152197) (xy 209.33655 120.179974) (xy 209.332869 120.180487) (xy 209.310083 120.183223) - (xy 209.16931 120.238737) (xy 209.169306 120.23874) (xy 209.048731 120.330175) (xy 209.048725 120.330181) - (xy 208.95729 120.450756) (xy 208.957287 120.45076) (xy 208.901773 120.591534) (xy 208.89115 120.679993) - (xy 208.89115 120.8236) (xy 208.872243 120.881791) (xy 208.822743 120.917755) (xy 208.79215 120.9226) - (xy 177.180051 120.9226) (xy 177.12186 120.903693) (xy 177.110047 120.893604) (xy 170.366746 114.150303) - (xy 170.338969 114.095786) (xy 170.33775 114.080299) (xy 170.33775 114.008144) (xy 170.332243 113.987592) - (xy 170.296827 113.855416) (xy 170.21777 113.718484) (xy 170.105966 113.60668) (xy 169.969034 113.527623) - (xy 169.825713 113.48922) (xy 169.820554 113.487837) (xy 169.816307 113.4867) (xy 169.658193 113.4867) - (xy 169.505466 113.527623) (xy 169.368534 113.60668) (xy 169.25673 113.718484) (xy 169.177673 113.855416) - (xy 169.13675 114.008143) (xy 80.835899 114.008143) (xy 80.833367 111.503743) (xy 106.23145 111.503743) - (xy 106.23145 111.661857) (xy 106.272373 111.814584) (xy 106.35143 111.951516) (xy 106.463234 112.06332) - (xy 106.600166 112.142377) (xy 106.752893 112.1833) (xy 106.752895 112.1833) (xy 106.911005 112.1833) - (xy 106.911007 112.1833) (xy 107.063734 112.142377) (xy 107.200666 112.06332) (xy 107.31247 111.951516) - (xy 107.391527 111.814584) (xy 107.43245 111.661857) (xy 107.43245 111.503743) (xy 107.420741 111.460043) - (xy 110.17675 111.460043) (xy 110.17675 111.618157) (xy 110.217673 111.770884) (xy 110.29673 111.907816) - (xy 110.408534 112.01962) (xy 110.545466 112.098677) (xy 110.698193 112.1396) (xy 110.698195 112.1396) - (xy 110.856305 112.1396) (xy 110.856307 112.1396) (xy 111.009034 112.098677) (xy 111.145966 112.01962) - (xy 111.25777 111.907816) (xy 111.336827 111.770884) (xy 111.37775 111.618157) (xy 111.37775 111.460043) - (xy 111.336827 111.307316) (xy 111.25777 111.170384) (xy 111.145966 111.05858) (xy 111.009034 110.979523) - (xy 110.856307 110.9386) (xy 110.698193 110.9386) (xy 110.545466 110.979523) (xy 110.408534 111.05858) - (xy 110.29673 111.170384) (xy 110.217673 111.307316) (xy 110.17675 111.460043) (xy 107.420741 111.460043) - (xy 107.391527 111.351016) (xy 107.31247 111.214084) (xy 107.200666 111.10228) (xy 107.063734 111.023223) - (xy 106.911007 110.9823) (xy 106.752893 110.9823) (xy 106.600166 111.023223) (xy 106.463234 111.10228) - (xy 106.35143 111.214084) (xy 106.272373 111.351016) (xy 106.23145 111.503743) (xy 80.833367 111.503743) - (xy 80.830838 109.001343) (xy 91.49615 109.001343) (xy 91.49615 109.159457) (xy 91.537073 109.312184) - (xy 91.61613 109.449116) (xy 91.727934 109.56092) (xy 91.864866 109.639977) (xy 92.017593 109.6809) - (xy 92.017595 109.6809) (xy 92.175704 109.6809) (xy 92.175707 109.6809) (xy 92.193761 109.676062) - (xy 92.254859 109.679262) (xy 92.30241 109.717766) (xy 92.316482 109.752374) (xy 92.344119 109.891318) - (xy 92.423308 110.082497) (xy 92.461456 110.139589) (xy 92.538274 110.254555) (xy 92.684595 110.400876) - (xy 92.856652 110.515841) (xy 93.04783 110.59503) (xy 93.250785 110.6354) (xy 93.250786 110.6354) - (xy 93.457714 110.6354) (xy 93.457715 110.6354) (xy 93.66067 110.59503) (xy 93.801887 110.536535) - (xy 93.839772 110.529) (xy 112.743349 110.529) (xy 112.80154 110.547907) (xy 112.837504 110.597407) - (xy 112.837504 110.658593) (xy 112.813353 110.698004) (xy 111.032453 112.478904) (xy 110.977936 112.506681) - (xy 110.962449 112.5079) (xy 110.890293 112.5079) (xy 110.737566 112.548823) (xy 110.600634 112.62788) - (xy 110.48883 112.739684) (xy 110.409773 112.876616) (xy 110.36885 113.029343) (xy 110.36885 113.187457) - (xy 110.409773 113.340184) (xy 110.48883 113.477116) (xy 110.600634 113.58892) (xy 110.737566 113.667977) - (xy 110.890293 113.7089) (xy 110.890295 113.7089) (xy 111.048405 113.7089) (xy 111.048407 113.7089) - (xy 111.201134 113.667977) (xy 111.338066 113.58892) (xy 111.44987 113.477116) (xy 111.528927 113.340184) - (xy 111.547748 113.269943) (xy 126.03365 113.269943) (xy 126.03365 113.428057) (xy 126.074573 113.580784) - (xy 126.15363 113.717716) (xy 126.265434 113.82952) (xy 126.402366 113.908577) (xy 126.555093 113.9495) - (xy 126.555095 113.9495) (xy 126.713205 113.9495) (xy 126.713207 113.9495) (xy 126.865934 113.908577) - (xy 127.002866 113.82952) (xy 127.11467 113.717716) (xy 127.193727 113.580784) (xy 127.23465 113.428057) - (xy 127.23465 113.398455) (xy 170.81635 113.398455) (xy 170.81635 113.556144) (xy 170.836858 113.659245) - (xy 170.845639 113.703389) (xy 170.847113 113.710796) (xy 170.847113 113.710798) (xy 170.907453 113.856474) - (xy 170.907459 113.856485) (xy 170.960162 113.935359) (xy 170.995061 113.987589) (xy 176.010861 119.003389) - (xy 176.122361 119.114889) (xy 176.200526 119.167117) (xy 176.253464 119.20249) (xy 176.253468 119.202492) - (xy 176.253471 119.202494) (xy 176.356483 119.245162) (xy 176.399152 119.262837) (xy 176.553807 119.2936) - (xy 176.553808 119.2936) (xy 196.930491 119.2936) (xy 196.930492 119.2936) (xy 197.085147 119.262837) - (xy 197.230829 119.202494) (xy 197.361939 119.114889) (xy 202.773439 113.703389) (xy 202.861044 113.572279) - (xy 202.921387 113.426597) (xy 202.95215 113.271942) (xy 202.95215 113.114258) (xy 202.921387 112.959603) - (xy 202.861044 112.813921) (xy 202.861043 112.813919) (xy 202.86104 112.813914) (xy 202.81144 112.739684) - (xy 202.773439 112.682811) (xy 202.661939 112.571311) (xy 202.609709 112.536412) (xy 202.530835 112.483709) - (xy 202.530824 112.483703) (xy 202.385147 112.423363) (xy 202.230494 112.3926) (xy 202.230492 112.3926) - (xy 202.072808 112.3926) (xy 202.072805 112.3926) (xy 201.918153 112.423363) (xy 201.918151 112.423363) - (xy 201.772475 112.483703) (xy 201.772464 112.483709) (xy 201.641361 112.571311) (xy 201.641357 112.571314) - (xy 196.549068 117.663604) (xy 196.494551 117.691381) (xy 196.479064 117.6926) (xy 177.005236 117.6926) - (xy 176.947045 117.673693) (xy 176.935232 117.663604) (xy 175.983771 116.712143) (xy 184.50215 116.712143) - (xy 184.50215 116.870257) (xy 184.543073 117.022984) (xy 184.62213 117.159916) (xy 184.733934 117.27172) - (xy 184.870866 117.350777) (xy 185.023593 117.3917) (xy 185.023595 117.3917) (xy 185.181705 117.3917) - (xy 185.181707 117.3917) (xy 185.334434 117.350777) (xy 185.471366 117.27172) (xy 185.58317 117.159916) - (xy 185.662227 117.022984) (xy 185.70315 116.870257) (xy 185.70315 116.712143) (xy 185.662227 116.559416) - (xy 185.58317 116.422484) (xy 185.471366 116.31068) (xy 185.334434 116.231623) (xy 185.181707 116.1907) - (xy 185.023593 116.1907) (xy 184.870866 116.231623) (xy 184.733934 116.31068) (xy 184.62213 116.422484) - (xy 184.543073 116.559416) (xy 184.50215 116.712143) (xy 175.983771 116.712143) (xy 175.219471 115.947843) - (xy 186.49635 115.947843) (xy 186.49635 116.105957) (xy 186.537273 116.258684) (xy 186.61633 116.395616) - (xy 186.728134 116.50742) (xy 186.865066 116.586477) (xy 187.017793 116.6274) (xy 187.017795 116.6274) - (xy 187.175905 116.6274) (xy 187.175907 116.6274) (xy 187.328634 116.586477) (xy 187.465566 116.50742) - (xy 187.57737 116.395616) (xy 187.656427 116.258684) (xy 187.69735 116.105957) (xy 187.69735 115.947843) - (xy 187.656427 115.795116) (xy 187.57737 115.658184) (xy 187.465566 115.54638) (xy 187.328634 115.467323) - (xy 187.175907 115.4264) (xy 187.017793 115.4264) (xy 186.865066 115.467323) (xy 186.728134 115.54638) - (xy 186.61633 115.658184) (xy 186.537273 115.795116) (xy 186.49635 115.947843) (xy 175.219471 115.947843) - (xy 173.827671 114.556043) (xy 184.65125 114.556043) (xy 184.65125 114.714157) (xy 184.692173 114.866884) - (xy 184.77123 115.003816) (xy 184.883034 115.11562) (xy 185.019966 115.194677) (xy 185.172693 115.2356) - (xy 185.172695 115.2356) (xy 185.330805 115.2356) (xy 185.330807 115.2356) (xy 185.483534 115.194677) - (xy 185.620466 115.11562) (xy 185.73227 115.003816) (xy 185.811327 114.866884) (xy 185.85225 114.714157) - (xy 185.85225 114.673043) (xy 192.37565 114.673043) (xy 192.37565 114.831157) (xy 192.416573 114.983884) - (xy 192.49563 115.120816) (xy 192.607434 115.23262) (xy 192.744366 115.311677) (xy 192.897093 115.3526) - (xy 192.897095 115.3526) (xy 193.055205 115.3526) (xy 193.055207 115.3526) (xy 193.207934 115.311677) - (xy 193.344866 115.23262) (xy 193.45667 115.120816) (xy 193.535727 114.983884) (xy 193.57665 114.831157) - (xy 193.57665 114.673043) (xy 193.535727 114.520316) (xy 193.45667 114.383384) (xy 193.344866 114.27158) - (xy 193.207934 114.192523) (xy 193.055207 114.1516) (xy 192.897093 114.1516) (xy 192.744366 114.192523) - (xy 192.607434 114.27158) (xy 192.49563 114.383384) (xy 192.416573 114.520316) (xy 192.37565 114.673043) - (xy 185.85225 114.673043) (xy 185.85225 114.556043) (xy 185.811327 114.403316) (xy 185.73227 114.266384) - (xy 185.620466 114.15458) (xy 185.483534 114.075523) (xy 185.330807 114.0346) (xy 185.172693 114.0346) - (xy 185.019966 114.075523) (xy 184.883034 114.15458) (xy 184.77123 114.266384) (xy 184.692173 114.403316) - (xy 184.65125 114.556043) (xy 173.827671 114.556043) (xy 172.127142 112.855514) (xy 172.127139 112.855511) - (xy 172.064885 112.813914) (xy 171.996035 112.767909) (xy 171.996024 112.767903) (xy 171.850347 112.707563) - (xy 171.695694 112.6768) (xy 171.695692 112.6768) (xy 171.538008 112.6768) (xy 171.538005 112.6768) - (xy 171.383353 112.707563) (xy 171.383351 112.707563) (xy 171.237675 112.767903) (xy 171.237664 112.767909) - (xy 171.106561 112.855511) (xy 171.106557 112.855514) (xy 170.995064 112.967007) (xy 170.995061 112.967011) - (xy 170.907459 113.098114) (xy 170.907453 113.098125) (xy 170.847113 113.243801) (xy 170.847113 113.243803) - (xy 170.81635 113.398455) (xy 127.23465 113.398455) (xy 127.23465 113.269943) (xy 127.193727 113.117216) - (xy 127.11467 112.980284) (xy 127.002866 112.86848) (xy 126.865934 112.789423) (xy 126.713207 112.7485) - (xy 126.555093 112.7485) (xy 126.402366 112.789423) (xy 126.265434 112.86848) (xy 126.15363 112.980284) - (xy 126.074573 113.117216) (xy 126.03365 113.269943) (xy 111.547748 113.269943) (xy 111.56985 113.187457) - (xy 111.56985 113.109684) (xy 111.570486 113.1041) (xy 111.580953 113.081128) (xy 111.588757 113.05711) - (xy 111.595488 113.049227) (xy 111.595856 113.048422) (xy 111.596477 113.04807) (xy 111.598846 113.045297) - (xy 113.496647 111.147496) (xy 113.551164 111.119719) (xy 113.566651 111.1185) (xy 126.123107 111.1185) - (xy 126.181298 111.137407) (xy 126.217262 111.186907) (xy 126.217262 111.248093) (xy 126.193112 111.287501) - (xy 126.13453 111.346084) (xy 126.055473 111.483016) (xy 126.01455 111.635743) (xy 126.01455 111.793857) - (xy 126.055473 111.946584) (xy 126.13453 112.083516) (xy 126.246334 112.19532) (xy 126.383266 112.274377) - (xy 126.535993 112.3153) (xy 126.535995 112.3153) (xy 126.694105 112.3153) (xy 126.694107 112.3153) - (xy 126.846834 112.274377) (xy 126.983766 112.19532) (xy 127.09557 112.083516) (xy 127.174627 111.946584) - (xy 127.21555 111.793857) (xy 127.21555 111.635743) (xy 127.174627 111.483016) (xy 127.09557 111.346084) - (xy 127.036987 111.287501) (xy 127.009212 111.232987) (xy 127.018783 111.172555) (xy 127.062048 111.12929) - (xy 127.106993 111.1185) (xy 131.444457 111.1185) (xy 131.502648 111.137407) (xy 131.538612 111.186907) - (xy 131.539803 111.232422) (xy 131.541997 111.232711) (xy 131.54115 111.239142) (xy 131.54115 111.239143) - (xy 131.54115 111.397257) (xy 131.582073 111.549984) (xy 131.66113 111.686916) (xy 131.772934 111.79872) - (xy 131.909866 111.877777) (xy 132.062593 111.9187) (xy 132.062595 111.9187) (xy 132.220705 111.9187) - (xy 132.220707 111.9187) (xy 132.373434 111.877777) (xy 132.510366 111.79872) (xy 132.62217 111.686916) - (xy 132.701227 111.549984) (xy 132.74215 111.397257) (xy 132.74215 111.239143) (xy 132.701227 111.086416) - (xy 132.62217 110.949484) (xy 132.510366 110.83768) (xy 132.510363 110.837678) (xy 132.487124 110.824261) - (xy 132.446183 110.778792) (xy 132.439787 110.717942) (xy 132.466618 110.668523) (xy 132.669898 110.465243) - (xy 196.29045 110.465243) (xy 196.29045 110.623357) (xy 196.331373 110.776084) (xy 196.41043 110.913016) - (xy 196.522234 111.02482) (xy 196.659166 111.103877) (xy 196.811893 111.1448) (xy 196.811895 111.1448) - (xy 196.970005 111.1448) (xy 196.970007 111.1448) (xy 197.122734 111.103877) (xy 197.259666 111.02482) - (xy 197.37147 110.913016) (xy 197.450527 110.776084) (xy 197.49145 110.623357) (xy 197.49145 110.465243) - (xy 197.450527 110.312516) (xy 197.37147 110.175584) (xy 197.259666 110.06378) (xy 197.122734 109.984723) - (xy 196.970007 109.9438) (xy 196.811893 109.9438) (xy 196.659166 109.984723) (xy 196.522234 110.06378) - (xy 196.41043 110.175584) (xy 196.331373 110.312516) (xy 196.29045 110.465243) (xy 132.669898 110.465243) - (xy 133.715899 109.419243) (xy 180.87385 109.419243) (xy 180.87385 109.577357) (xy 180.914773 109.730084) - (xy 180.99383 109.867016) (xy 181.105634 109.97882) (xy 181.242566 110.057877) (xy 181.395293 110.0988) - (xy 181.395295 110.0988) (xy 181.553405 110.0988) (xy 181.553407 110.0988) (xy 181.706134 110.057877) - (xy 181.843066 109.97882) (xy 181.95487 109.867016) (xy 182.033927 109.730084) (xy 182.07485 109.577357) - (xy 182.07485 109.419243) (xy 182.033927 109.266516) (xy 181.95487 109.129584) (xy 181.843066 109.01778) - (xy 181.706134 108.938723) (xy 181.553407 108.8978) (xy 181.395293 108.8978) (xy 181.242566 108.938723) - (xy 181.105634 109.01778) (xy 180.99383 109.129584) (xy 180.914773 109.266516) (xy 180.87385 109.419243) - (xy 133.715899 109.419243) (xy 134.672647 108.462496) (xy 134.727164 108.434719) (xy 134.742651 108.4335) - (xy 163.733139 108.4335) (xy 163.79133 108.452407) (xy 163.827294 108.501907) (xy 163.828765 108.558121) - (xy 163.79875 108.670143) (xy 163.79875 108.828257) (xy 163.839673 108.980984) (xy 163.91873 109.117916) - (xy 164.030534 109.22972) (xy 164.167466 109.308777) (xy 164.320193 109.3497) (xy 164.320195 109.3497) - (xy 164.478305 109.3497) (xy 164.478307 109.3497) (xy 164.631034 109.308777) (xy 164.767966 109.22972) - (xy 164.87977 109.117916) (xy 164.958827 108.980984) (xy 164.99975 108.828257) (xy 164.99975 108.670143) - (xy 164.969734 108.558121) (xy 164.972937 108.497021) (xy 165.011442 108.449472) (xy 165.065361 108.4335) - (xy 173.457206 108.4335) (xy 173.515397 108.452407) (xy 173.527209 108.462496) (xy 173.561735 108.497021) - (xy 173.578234 108.51352) (xy 173.715166 108.592577) (xy 173.867893 108.6335) (xy 173.867895 108.6335) - (xy 174.026005 108.6335) (xy 174.026007 108.6335) (xy 174.178734 108.592577) (xy 174.315666 108.51352) - (xy 174.42747 108.401716) (xy 174.506527 108.264784) (xy 174.54745 108.112057) (xy 174.54745 107.953943) - (xy 174.54672 107.951218) (xy 174.546825 107.949203) (xy 174.546603 107.947511) (xy 174.546916 107.947469) - (xy 174.549925 107.890118) (xy 174.588432 107.84257) (xy 174.642348 107.8266) (xy 176.879406 107.8266) - (xy 176.937597 107.845507) (xy 176.949409 107.855596) (xy 176.983932 107.890118) (xy 177.000434 107.90662) - (xy 177.137366 107.985677) (xy 177.290093 108.0266) (xy 177.290095 108.0266) (xy 177.448205 108.0266) - (xy 177.448207 108.0266) (xy 177.600934 107.985677) (xy 177.737866 107.90662) (xy 177.84967 107.794816) - (xy 177.928727 107.657884) (xy 177.933936 107.638443) (xy 186.54115 107.638443) (xy 186.54115 107.796557) - (xy 186.582073 107.949284) (xy 186.66113 108.086216) (xy 186.772934 108.19802) (xy 186.909866 108.277077) - (xy 187.062593 108.318) (xy 187.062595 108.318) (xy 187.220705 108.318) (xy 187.220707 108.318) - (xy 187.373434 108.277077) (xy 187.510366 108.19802) (xy 187.62217 108.086216) (xy 187.701227 107.949284) - (xy 187.74215 107.796557) (xy 187.74215 107.638443) (xy 187.714953 107.536943) (xy 188.09115 107.536943) - (xy 188.09115 107.695057) (xy 188.132073 107.847784) (xy 188.21113 107.984716) (xy 188.322934 108.09652) - (xy 188.459866 108.175577) (xy 188.612593 108.2165) (xy 188.612595 108.2165) (xy 188.770705 108.2165) - (xy 188.770707 108.2165) (xy 188.923434 108.175577) (xy 189.060366 108.09652) (xy 189.17217 107.984716) - (xy 189.251227 107.847784) (xy 189.29215 107.695057) (xy 189.29215 107.536943) (xy 189.251227 107.384216) - (xy 189.17217 107.247284) (xy 189.060366 107.13548) (xy 188.923434 107.056423) (xy 188.770707 107.0155) - (xy 188.612593 107.0155) (xy 188.459866 107.056423) (xy 188.322934 107.13548) (xy 188.21113 107.247284) - (xy 188.132073 107.384216) (xy 188.09115 107.536943) (xy 187.714953 107.536943) (xy 187.701227 107.485716) - (xy 187.62217 107.348784) (xy 187.510366 107.23698) (xy 187.373434 107.157923) (xy 187.220707 107.117) - (xy 187.062593 107.117) (xy 186.909866 107.157923) (xy 186.772934 107.23698) (xy 186.66113 107.348784) - (xy 186.582073 107.485716) (xy 186.54115 107.638443) (xy 177.933936 107.638443) (xy 177.96965 107.505157) - (xy 177.96965 107.347043) (xy 177.928727 107.194316) (xy 177.84967 107.057384) (xy 177.737866 106.94558) - (xy 177.600934 106.866523) (xy 177.448207 106.8256) (xy 177.290093 106.8256) (xy 177.137366 106.866523) - (xy 177.000431 106.945582) (xy 176.949409 106.996604) (xy 176.894892 107.024381) (xy 176.879406 107.0256) - (xy 105.858213 107.0256) (xy 105.800022 107.006693) (xy 105.764058 106.957193) (xy 105.764058 106.896007) - (xy 105.800022 106.846507) (xy 105.808699 106.840872) (xy 105.849666 106.81722) (xy 105.96147 106.705416) - (xy 106.040527 106.568484) (xy 106.08145 106.415757) (xy 106.08145 106.257643) (xy 106.040527 106.104916) - (xy 105.96147 105.967984) (xy 105.958929 105.965443) (xy 112.59115 105.965443) (xy 112.59115 106.123557) - (xy 112.632073 106.276284) (xy 112.71113 106.413216) (xy 112.822934 106.52502) (xy 112.959866 106.604077) - (xy 113.112593 106.645) (xy 113.112595 106.645) (xy 113.270705 106.645) (xy 113.270707 106.645) - (xy 113.423434 106.604077) (xy 113.560366 106.52502) (xy 113.67217 106.413216) (xy 113.751227 106.276284) - (xy 113.79215 106.123557) (xy 113.79215 105.965443) (xy 113.751227 105.812716) (xy 113.67217 105.675784) - (xy 113.560366 105.56398) (xy 113.423434 105.484923) (xy 113.270707 105.444) (xy 113.112593 105.444) - (xy 112.959866 105.484923) (xy 112.822934 105.56398) (xy 112.71113 105.675784) (xy 112.632073 105.812716) - (xy 112.59115 105.965443) (xy 105.958929 105.965443) (xy 105.849666 105.85618) (xy 105.712734 105.777123) - (xy 105.560007 105.7362) (xy 105.401893 105.7362) (xy 105.249166 105.777123) (xy 105.112234 105.85618) - (xy 105.00043 105.967984) (xy 104.921373 106.104916) (xy 104.88045 106.257643) (xy 104.88045 106.415757) - (xy 104.921373 106.568484) (xy 105.00043 106.705416) (xy 105.112234 106.81722) (xy 105.153188 106.840865) - (xy 105.194128 106.886333) (xy 105.200524 106.947183) (xy 105.169931 107.000171) (xy 105.114036 107.025058) - (xy 105.103687 107.0256) (xy 100.279594 107.0256) (xy 100.221403 107.006693) (xy 100.209591 106.996604) - (xy 100.158568 106.945582) (xy 100.158566 106.94558) (xy 100.021634 106.866523) (xy 99.868907 106.8256) - (xy 99.710793 106.8256) (xy 99.558066 106.866523) (xy 99.421134 106.94558) (xy 99.30933 107.057384) - (xy 99.230273 107.194316) (xy 99.18935 107.347043) (xy 99.18935 107.505157) (xy 99.230273 107.657884) - (xy 99.30933 107.794816) (xy 99.421134 107.90662) (xy 99.558066 107.985677) (xy 99.710793 108.0266) - (xy 99.710795 108.0266) (xy 99.868905 108.0266) (xy 99.868907 108.0266) (xy 100.021634 107.985677) - (xy 100.158566 107.90662) (xy 100.184079 107.881106) (xy 100.209591 107.855596) (xy 100.264108 107.827819) - (xy 100.279594 107.8266) (xy 133.936749 107.8266) (xy 133.99494 107.845507) (xy 134.030904 107.895007) - (xy 134.030904 107.956193) (xy 134.006753 107.995604) (xy 131.713853 110.288504) (xy 131.659336 110.316281) - (xy 131.643849 110.3175) (xy 117.717289 110.3175) (xy 117.659098 110.298593) (xy 117.623134 110.249093) - (xy 117.623134 110.187907) (xy 117.644974 110.152265) (xy 117.644544 110.151912) (xy 117.6471 110.148796) - (xy 117.647283 110.148498) (xy 117.647627 110.148155) (xy 117.762591 109.976098) (xy 117.84178 109.78492) - (xy 117.88215 109.581965) (xy 117.88215 109.375035) (xy 117.84178 109.17208) (xy 117.762591 108.980902) - (xy 117.647627 108.808845) (xy 117.501305 108.662523) (xy 117.457869 108.6335) (xy 117.329247 108.547558) - (xy 117.138068 108.468369) (xy 116.935117 108.428) (xy 116.935115 108.428) (xy 93.564115 108.428) - (xy 93.357184 108.428) (xy 93.357183 108.428) (xy 93.343359 108.43075) (xy 93.329534 108.4335) (xy 93.154231 108.468369) - (xy 92.963052 108.547558) (xy 92.790997 108.66252) (xy 92.728485 108.725032) (xy 92.673968 108.752808) - (xy 92.613536 108.743236) (xy 92.579939 108.715293) (xy 92.577172 108.711687) (xy 92.577171 108.711686) - (xy 92.57717 108.711684) (xy 92.465366 108.59988) (xy 92.328434 108.520823) (xy 92.175707 108.4799) - (xy 92.017593 108.4799) (xy 91.864866 108.520823) (xy 91.727934 108.59988) (xy 91.61613 108.711684) - (xy 91.537073 108.848616) (xy 91.49615 109.001343) (xy 80.830838 109.001343) (xy 80.827114 105.316743) - (xy 115.14295 105.316743) (xy 115.14295 105.474857) (xy 115.183873 105.627584) (xy 115.26293 105.764516) - (xy 115.374734 105.87632) (xy 115.511666 105.955377) (xy 115.664393 105.9963) (xy 115.664395 105.9963) - (xy 115.822505 105.9963) (xy 115.822507 105.9963) (xy 115.975234 105.955377) (xy 116.112166 105.87632) - (xy 116.22397 105.764516) (xy 116.303027 105.627584) (xy 116.34395 105.474857) (xy 116.34395 105.316743) - (xy 116.303027 105.164016) (xy 116.22397 105.027084) (xy 116.112166 104.91528) (xy 115.975234 104.836223) - (xy 115.822507 104.7953) (xy 115.664393 104.7953) (xy 115.511666 104.836223) (xy 115.374734 104.91528) - (xy 115.26293 105.027084) (xy 115.183873 105.164016) (xy 115.14295 105.316743) (xy 80.827114 105.316743) - (xy 80.825763 103.980443) (xy 90.49625 103.980443) (xy 90.49625 104.138557) (xy 90.537173 104.291284) - (xy 90.61623 104.428216) (xy 90.728034 104.54002) (xy 90.864966 104.619077) (xy 91.017693 104.66) - (xy 91.017695 104.66) (xy 91.175805 104.66) (xy 91.175807 104.66) (xy 91.328534 104.619077) (xy 91.465466 104.54002) - (xy 91.57727 104.428216) (xy 91.656327 104.291284) (xy 91.69725 104.138557) (xy 91.69725 103.980443) - (xy 91.656327 103.827716) (xy 91.57727 103.690784) (xy 91.465466 103.57898) (xy 91.328534 103.499923) - (xy 91.175807 103.459) (xy 91.017693 103.459) (xy 90.864966 103.499923) (xy 90.728034 103.57898) - (xy 90.61623 103.690784) (xy 90.537173 103.827716) (xy 90.49625 103.980443) (xy 80.825763 103.980443) - (xy 80.82289 101.138343) (xy 97.77335 101.138343) (xy 97.77335 101.296457) (xy 97.814273 101.449184) - (xy 97.89333 101.586116) (xy 98.005134 101.69792) (xy 98.142066 101.776977) (xy 98.294793 101.8179) - (xy 98.294795 101.8179) (xy 98.452904 101.8179) (xy 98.452907 101.8179) (xy 98.545595 101.793064) - (xy 98.606693 101.796266) (xy 98.654243 101.834771) (xy 98.670079 101.893872) (xy 98.648976 101.948847) - (xy 98.649481 101.949234) (xy 98.648174 101.950936) (xy 98.648153 101.950993) (xy 98.648004 101.951157) - (xy 98.645535 101.954376) (xy 98.64553 101.954383) (xy 98.64553 101.954384) (xy 98.566473 102.091316) - (xy 98.52555 102.244043) (xy 98.52555 102.402157) (xy 98.566473 102.554884) (xy 98.64553 102.691816) - (xy 98.757334 102.80362) (xy 98.894266 102.882677) (xy 98.963639 102.901265) (xy 99.014952 102.934588) - (xy 99.036879 102.991709) (xy 99.021044 103.05081) (xy 99.00802 103.066893) (xy 98.992932 103.081981) - (xy 98.99293 103.081983) (xy 98.99293 103.081984) (xy 98.913873 103.218916) (xy 98.87295 103.371643) - (xy 98.87295 103.529757) (xy 98.913873 103.682484) (xy 98.99293 103.819416) (xy 99.104734 103.93122) - (xy 99.241666 104.010277) (xy 99.394393 104.0512) (xy 99.394395 104.0512) (xy 99.552505 104.0512) - (xy 99.552507 104.0512) (xy 99.705234 104.010277) (xy 99.842166 103.93122) (xy 99.95397 103.819416) - (xy 100.033027 103.682484) (xy 100.07395 103.529757) (xy 100.07395 103.457601) (xy 100.092857 103.39941) - (xy 100.102946 103.387597) (xy 100.837347 102.653196) (xy 100.891864 102.625419) (xy 100.907351 102.6242) - (xy 113.319361 102.6242) (xy 113.377552 102.643107) (xy 113.413516 102.692607) (xy 113.413516 102.753793) - (xy 113.4051 102.772695) (xy 113.342273 102.881516) (xy 113.30135 103.034243) (xy 113.30135 103.192357) - (xy 113.342273 103.345084) (xy 113.42133 103.482016) (xy 113.533134 103.59382) (xy 113.670066 103.672877) - (xy 113.822793 103.7138) (xy 113.822795 103.7138) (xy 113.980905 103.7138) (xy 113.980907 103.7138) - (xy 114.133634 103.672877) (xy 114.270566 103.59382) (xy 114.357443 103.506943) (xy 132.82905 103.506943) - (xy 132.82905 103.665057) (xy 132.869973 103.817784) (xy 132.94903 103.954716) (xy 133.060834 104.06652) - (xy 133.197766 104.145577) (xy 133.350493 104.1865) (xy 133.350495 104.1865) (xy 133.508605 104.1865) - (xy 133.508607 104.1865) (xy 133.661334 104.145577) (xy 133.798266 104.06652) (xy 133.904443 103.960343) - (xy 175.46625 103.960343) (xy 175.46625 104.118457) (xy 175.507173 104.271184) (xy 175.58623 104.408116) - (xy 175.698034 104.51992) (xy 175.834966 104.598977) (xy 175.987693 104.6399) (xy 175.987695 104.6399) - (xy 176.145805 104.6399) (xy 176.145807 104.6399) (xy 176.298534 104.598977) (xy 176.435466 104.51992) - (xy 176.54727 104.408116) (xy 176.626327 104.271184) (xy 176.66725 104.118457) (xy 176.66725 103.960343) - (xy 176.626327 103.807616) (xy 176.54727 103.670684) (xy 176.435466 103.55888) (xy 176.298534 103.479823) - (xy 176.145807 103.4389) (xy 175.987693 103.4389) (xy 175.834966 103.479823) (xy 175.698034 103.55888) - (xy 175.58623 103.670684) (xy 175.507173 103.807616) (xy 175.46625 103.960343) (xy 133.904443 103.960343) - (xy 133.91007 103.954716) (xy 133.989127 103.817784) (xy 134.03005 103.665057) (xy 134.03005 103.506943) - (xy 133.989127 103.354216) (xy 133.91007 103.217284) (xy 133.798266 103.10548) (xy 133.661334 103.026423) - (xy 133.508607 102.9855) (xy 133.350493 102.9855) (xy 133.197766 103.026423) (xy 133.060834 103.10548) - (xy 132.94903 103.217284) (xy 132.869973 103.354216) (xy 132.82905 103.506943) (xy 114.357443 103.506943) - (xy 114.38237 103.482016) (xy 114.461427 103.345084) (xy 114.50235 103.192357) (xy 114.50235 103.034243) - (xy 114.461427 102.881516) (xy 114.398601 102.772698) (xy 114.385881 102.712851) (xy 114.410768 102.656956) - (xy 114.463756 102.626363) (xy 114.484339 102.6242) (xy 171.972375 102.6242) (xy 171.972377 102.6242) - (xy 172.074238 102.596907) (xy 172.07424 102.596905) (xy 172.074242 102.596905) (xy 172.165558 102.544183) - (xy 172.165558 102.544182) (xy 172.165563 102.54418) (xy 172.4657 102.244043) (xy 188.06925 102.244043) - (xy 188.06925 102.402157) (xy 188.110173 102.554884) (xy 188.18923 102.691816) (xy 188.301034 102.80362) - (xy 188.437966 102.882677) (xy 188.590693 102.9236) (xy 188.590695 102.9236) (xy 188.748805 102.9236) - (xy 188.748807 102.9236) (xy 188.901534 102.882677) (xy 189.038466 102.80362) (xy 189.15027 102.691816) - (xy 189.229327 102.554884) (xy 189.27025 102.402157) (xy 189.27025 102.244043) (xy 189.229327 102.091316) - (xy 189.15027 101.954384) (xy 189.038466 101.84258) (xy 188.901534 101.763523) (xy 188.748807 101.7226) - (xy 188.590693 101.7226) (xy 188.437966 101.763523) (xy 188.301034 101.84258) (xy 188.18923 101.954384) - (xy 188.110173 102.091316) (xy 188.06925 102.244043) (xy 172.4657 102.244043) (xy 175.620847 99.088896) - (xy 175.675364 99.061119) (xy 175.690851 99.0599) (xy 175.763005 99.0599) (xy 175.763007 99.0599) - (xy 175.915734 99.018977) (xy 176.052666 98.93992) (xy 176.16447 98.828116) (xy 176.243527 98.691184) - (xy 176.28445 98.538457) (xy 176.28445 98.380343) (xy 176.243527 98.227616) (xy 176.16447 98.090684) - (xy 176.052666 97.97888) (xy 175.915734 97.899823) (xy 175.763007 97.8589) (xy 175.604893 97.8589) - (xy 175.452166 97.899823) (xy 175.315234 97.97888) (xy 175.20343 98.090684) (xy 175.124373 98.227616) - (xy 175.101957 98.311276) (xy 175.08345 98.380344) (xy 175.08345 98.452499) (xy 175.064543 98.51069) - (xy 175.054454 98.522503) (xy 171.782753 101.794204) (xy 171.728236 101.821981) (xy 171.712749 101.8232) - (xy 100.753177 101.8232) (xy 100.647723 101.8232) (xy 100.604539 101.834771) (xy 100.545857 101.850494) - (xy 100.454541 101.903216) (xy 99.895554 102.462203) (xy 99.841037 102.48998) (xy 99.780605 102.480409) - (xy 99.73734 102.437144) (xy 99.72655 102.392199) (xy 99.72655 102.244044) (xy 99.721483 102.225134) - (xy 99.685627 102.091316) (xy 99.60657 101.954384) (xy 99.494766 101.84258) (xy 99.357834 101.763523) - (xy 99.205107 101.7226) (xy 99.046993 101.7226) (xy 98.954307 101.747435) (xy 98.893205 101.744232) - (xy 98.845655 101.705727) (xy 98.82982 101.646626) (xy 98.850922 101.591652) (xy 98.850419 101.591266) - (xy 98.851723 101.589565) (xy 98.851747 101.589505) (xy 98.851902 101.589332) (xy 98.854364 101.586123) - (xy 98.854365 101.58612) (xy 98.85437 101.586116) (xy 98.933427 101.449184) (xy 98.97435 101.296457) - (xy 98.97435 101.138343) (xy 98.933427 100.985616) (xy 98.85437 100.848684) (xy 98.742566 100.73688) - (xy 98.605634 100.657823) (xy 98.452907 100.6169) (xy 98.294793 100.6169) (xy 98.142066 100.657823) - (xy 98.005134 100.73688) (xy 97.89333 100.848684) (xy 97.814273 100.985616) (xy 97.77335 101.138343) - (xy 80.82289 101.138343) (xy 80.821878 100.136643) (xy 101.98945 100.136643) (xy 101.98945 100.294757) - (xy 102.030373 100.447484) (xy 102.10943 100.584416) (xy 102.221234 100.69622) (xy 102.358166 100.775277) - (xy 102.510893 100.8162) (xy 102.510895 100.8162) (xy 102.669005 100.8162) (xy 102.669007 100.8162) - (xy 102.821734 100.775277) (xy 102.958666 100.69622) (xy 103.07047 100.584416) (xy 103.149527 100.447484) - (xy 103.19045 100.294757) (xy 103.19045 100.136643) (xy 103.149527 99.983916) (xy 103.07047 99.846984) - (xy 102.958666 99.73518) (xy 102.821734 99.656123) (xy 102.669007 99.6152) (xy 102.510893 99.6152) - (xy 102.358166 99.656123) (xy 102.221234 99.73518) (xy 102.10943 99.846984) (xy 102.030373 99.983916) - (xy 101.98945 100.136643) (xy 80.821878 100.136643) (xy 80.817073 95.383143) (xy 102.32065 95.383143) - (xy 102.32065 95.541257) (xy 102.361573 95.693984) (xy 102.44063 95.830916) (xy 102.552434 95.94272) - (xy 102.689366 96.021777) (xy 102.842093 96.0627) (xy 102.842095 96.0627) (xy 103.000205 96.0627) - (xy 103.000207 96.0627) (xy 103.152934 96.021777) (xy 103.289866 95.94272) (xy 103.40167 95.830916) - (xy 103.480727 95.693984) (xy 103.52165 95.541257) (xy 103.52165 95.383143) (xy 103.480727 95.230416) - (xy 103.40167 95.093484) (xy 103.289866 94.98168) (xy 103.152934 94.902623) (xy 103.000207 94.8617) - (xy 102.842093 94.8617) (xy 102.689366 94.902623) (xy 102.552434 94.98168) (xy 102.44063 95.093484) - (xy 102.361573 95.230416) (xy 102.32065 95.383143) (xy 80.817073 95.383143) (xy 80.814926 93.259043) - (xy 92.76615 93.259043) (xy 92.76615 93.417157) (xy 92.807073 93.569884) (xy 92.88613 93.706816) - (xy 92.997934 93.81862) (xy 93.134866 93.897677) (xy 93.287593 93.9386) (xy 93.287595 93.9386) (xy 93.445705 93.9386) - (xy 93.445707 93.9386) (xy 93.598434 93.897677) (xy 93.735366 93.81862) (xy 93.84717 93.706816) - (xy 93.926227 93.569884) (xy 93.96715 93.417157) (xy 93.96715 93.274743) (xy 98.88025 93.274743) - (xy 98.88025 93.432857) (xy 98.921173 93.585584) (xy 99.00023 93.722516) (xy 99.112034 93.83432) - (xy 99.248966 93.913377) (xy 99.401693 93.9543) (xy 99.401695 93.9543) (xy 99.559805 93.9543) (xy 99.559807 93.9543) - (xy 99.712534 93.913377) (xy 99.849466 93.83432) (xy 99.96127 93.722516) (xy 100.040327 93.585584) - (xy 100.08125 93.432857) (xy 100.08125 93.274743) (xy 100.040327 93.122016) (xy 99.96127 92.985084) - (xy 99.849466 92.87328) (xy 99.712534 92.794223) (xy 99.559807 92.7533) (xy 99.401693 92.7533) (xy 99.248966 92.794223) - (xy 99.112034 92.87328) (xy 99.00023 92.985084) (xy 98.921173 93.122016) (xy 98.88025 93.274743) - (xy 93.96715 93.274743) (xy 93.96715 93.259043) (xy 93.926227 93.106316) (xy 93.84717 92.969384) - (xy 93.735366 92.85758) (xy 93.598434 92.778523) (xy 93.445707 92.7376) (xy 93.287593 92.7376) (xy 93.134866 92.778523) - (xy 92.997934 92.85758) (xy 92.88613 92.969384) (xy 92.807073 93.106316) (xy 92.76615 93.259043) - (xy 80.814926 93.259043) (xy 80.805893 84.322543) (xy 93.54865 84.322543) (xy 93.54865 84.480657) - (xy 93.589573 84.633384) (xy 93.66863 84.770316) (xy 93.780434 84.88212) (xy 93.917366 84.961177) - (xy 94.070093 85.0021) (xy 94.070095 85.0021) (xy 94.228205 85.0021) (xy 94.228207 85.0021) (xy 94.380934 84.961177) - (xy 94.517866 84.88212) (xy 94.62967 84.770316) (xy 94.708727 84.633384) (xy 94.74965 84.480657) - (xy 94.74965 84.322543) (xy 94.708727 84.169816) (xy 94.62967 84.032884) (xy 94.517866 83.92108) - (xy 94.380934 83.842023) (xy 94.228207 83.8011) (xy 94.070093 83.8011) (xy 93.917366 83.842023) - (xy 93.780434 83.92108) (xy 93.66863 84.032884) (xy 93.589573 84.169816) (xy 93.54865 84.322543) - (xy 80.805893 84.322543) (xy 80.795004 73.550373) (xy 87.34115 73.550373) (xy 87.34115 73.655827) - (xy 87.363729 73.740093) (xy 87.368444 73.757692) (xy 87.421166 73.849008) (xy 87.421168 73.84901) - (xy 87.42117 73.849013) (xy 105.612155 92.039998) (xy 105.639931 92.094513) (xy 105.64115 92.11) - (xy 105.64115 95.410373) (xy 105.64115 95.515827) (xy 105.66522 95.605659) (xy 105.668444 95.617692) - (xy 105.721166 95.709008) (xy 105.721167 95.709009) (xy 105.721168 95.70901) (xy 105.72117 95.709013) - (xy 106.107157 96.095) (xy 106.480029 96.467872) (xy 106.507806 96.522389) (xy 106.498235 96.582821) - (xy 106.45497 96.626086) (xy 106.430818 96.633587) (xy 106.430961 96.634121) (xy 106.424695 96.6358) - (xy 106.424693 96.6358) (xy 106.271966 96.676723) (xy 106.135034 96.75578) (xy 106.02323 96.867584) - (xy 105.944173 97.004516) (xy 105.90325 97.157243) (xy 105.90325 97.315357) (xy 105.944173 97.468084) - (xy 106.02323 97.605016) (xy 106.135034 97.71682) (xy 106.271966 97.795877) (xy 106.424693 97.8368) - (xy 106.424695 97.8368) (xy 106.582805 97.8368) (xy 106.582807 97.8368) (xy 106.735534 97.795877) - (xy 106.872466 97.71682) (xy 106.98427 97.605016) (xy 107.063327 97.468084) (xy 107.10425 97.315357) - (xy 107.10425 97.315355) (xy 107.105929 97.309089) (xy 107.107625 97.309543) (xy 107.130358 97.26188) - (xy 107.184128 97.232682) (xy 107.24479 97.240666) (xy 107.272177 97.26002) (xy 108.952077 98.939919) - (xy 110.551168 100.53901) (xy 110.55117 100.539013) (xy 110.625737 100.61358) (xy 110.644719 100.624539) - (xy 110.663701 100.635499) (xy 110.663702 100.635499) (xy 110.717063 100.666307) (xy 110.818924 100.693601) - (xy 110.818926 100.693601) (xy 110.93044 100.693601) (xy 110.930456 100.6936) (xy 112.514375 100.6936) - (xy 112.514377 100.6936) (xy 112.616238 100.666307) (xy 112.61624 100.666305) (xy 112.616242 100.666305) - (xy 112.707558 100.613583) (xy 112.707558 100.613582) (xy 112.707563 100.61358) (xy 117.888547 95.432596) - (xy 117.895664 95.428969) (xy 117.90036 95.422507) (xy 117.922408 95.415343) (xy 117.943064 95.404819) - (xy 117.958551 95.4036) (xy 117.96665 95.4036) (xy 118.024841 95.422507) (xy 118.036647 95.43259) - (xy 118.037602 95.433545) (xy 118.037604 95.433546) (xy 118.037606 95.433548) (xy 118.103015 95.471312) - (xy 118.103016 95.471312) (xy 118.103018 95.471313) (xy 118.128928 95.486272) (xy 118.12893 95.486272) - (xy 118.128931 95.486273) (xy 118.179858 95.499919) (xy 118.230785 95.513565) (xy 118.230787 95.513566) - (xy 118.230788 95.513566) (xy 118.342305 95.513566) (xy 118.342321 95.513565) (xy 122.83441 95.513565) - (xy 122.834412 95.513565) (xy 122.936273 95.486272) (xy 122.936275 95.48627) (xy 122.936277 95.48627) - (xy 123.027593 95.433548) (xy 123.027593 95.433547) (xy 123.027598 95.433545) (xy 123.946648 94.514493) - (xy 123.960619 94.507375) (xy 123.971706 94.496289) (xy 123.987191 94.493836) (xy 124.001163 94.486718) - (xy 124.01665 94.48917) (xy 124.032138 94.486718) (xy 124.046107 94.493836) (xy 124.061595 94.496289) - (xy 124.086651 94.514494) (xy 124.131168 94.559011) (xy 124.15705 94.584893) (xy 124.172782 94.605396) - (xy 124.192293 94.639189) (xy 124.21113 94.671816) (xy 124.322934 94.78362) (xy 124.459866 94.862677) - (xy 124.477774 94.867475) (xy 124.529086 94.900797) (xy 124.551014 94.957918) (xy 124.55115 94.963101) - (xy 124.55115 95.072157) (xy 124.576374 95.166293) (xy 124.588255 95.210634) (xy 124.585052 95.271736) - (xy 124.55897 95.306677) (xy 124.560325 95.308032) (xy 124.505736 95.362619) (xy 124.505737 95.36262) - (xy 124.48837 95.379987) (xy 124.488369 95.379986) (xy 124.43117 95.437186) (xy 124.412581 95.469382) - (xy 124.378443 95.528512) (xy 124.378442 95.528515) (xy 124.3752 95.534131) (xy 124.374176 95.533539) - (xy 124.358471 95.557043) (xy 124.351127 95.564386) (xy 124.272073 95.701314) (xy 124.244791 95.803134) - (xy 124.23115 95.854043) (xy 124.23115 96.012157) (xy 124.233728 96.021777) (xy 124.23413 96.023277) - (xy 124.230927 96.084379) (xy 124.192422 96.131929) (xy 124.138503 96.1479) (xy 123.872294 96.1479) - (xy 123.814103 96.128993) (xy 123.802291 96.118904) (xy 123.751268 96.067882) (xy 123.751266 96.06788) - (xy 123.614334 95.988823) (xy 123.461607 95.9479) (xy 123.303493 95.9479) (xy 123.150766 95.988823) - (xy 123.013834 96.06788) (xy 122.90203 96.179684) (xy 122.822973 96.316616) (xy 122.78205 96.469343) - (xy 122.78205 96.627457) (xy 122.822973 96.780184) (xy 122.90203 96.917116) (xy 122.902032 96.917118) - (xy 122.905275 96.922735) (xy 122.90314 96.923967) (xy 122.920012 96.971602) (xy 122.902638 97.030269) - (xy 122.854099 97.067519) (xy 122.821046 97.0732) (xy 122.228223 97.0732) (xy 122.126363 97.100493) - (xy 122.126362 97.100493) (xy 122.12636 97.100494) (xy 122.093828 97.119277) (xy 122.061508 97.137936) - (xy 122.01201 97.1512) (xy 121.923893 97.1512) (xy 121.771166 97.192123) (xy 121.634234 97.27118) - (xy 121.52243 97.382984) (xy 121.443373 97.519916) (xy 121.40245 97.672643) (xy 121.40245 97.830757) - (xy 121.443373 97.983484) (xy 121.52243 98.120416) (xy 121.634234 98.23222) (xy 121.771166 98.311277) - (xy 121.923893 98.3522) (xy 121.923895 98.3522) (xy 122.082005 98.3522) (xy 122.082007 98.3522) - (xy 122.234734 98.311277) (xy 122.371666 98.23222) (xy 122.48347 98.120416) (xy 122.562527 97.983484) - (xy 122.572149 97.947574) (xy 122.605473 97.896262) (xy 122.662594 97.874336) (xy 122.667775 97.8742) - (xy 125.968831 97.8742) (xy 126.027022 97.893107) (xy 126.062986 97.942607) (xy 126.064326 97.993835) - (xy 126.064897 97.993911) (xy 126.064422 97.997513) (xy 126.064456 97.998824) (xy 126.06405 98.000343) - (xy 126.06405 98.158457) (xy 126.104973 98.311184) (xy 126.18403 98.448116) (xy 126.295834 98.55992) - (xy 126.432766 98.638977) (xy 126.585493 98.6799) (xy 126.585495 98.6799) (xy 126.743605 98.6799) - (xy 126.743607 98.6799) (xy 126.896334 98.638977) (xy 127.033266 98.55992) (xy 127.070683 98.522503) - (xy 127.084291 98.508896) (xy 127.138808 98.481119) (xy 127.154294 98.4799) (xy 133.832177 98.4799) - (xy 133.890368 98.498807) (xy 133.926332 98.548307) (xy 133.927803 98.604521) (xy 133.89125 98.740943) - (xy 133.89125 98.899057) (xy 133.932173 99.051784) (xy 134.01123 99.188716) (xy 134.123034 99.30052) - (xy 134.259966 99.379577) (xy 134.412693 99.4205) (xy 134.484849 99.4205) (xy 134.54304 99.439407) - (xy 134.554852 99.449496) (xy 134.998836 99.893479) (xy 134.998841 99.893483) (xy 135.090158 99.946205) - (xy 135.090156 99.946205) (xy 135.09016 99.946206) (xy 135.090162 99.946207) (xy 135.192023 99.9735) - (xy 135.192025 99.9735) (xy 150.536075 99.9735) (xy 150.536077 99.9735) (xy 150.637938 99.946207) - (xy 150.63794 99.946205) (xy 150.637942 99.946205) (xy 150.729258 99.893483) (xy 150.729258 99.893482) - (xy 150.729263 99.89348) (xy 152.993447 97.629296) (xy 153.027701 97.611843) (xy 171.15965 97.611843) - (xy 171.15965 97.769957) (xy 171.200573 97.922684) (xy 171.27963 98.059616) (xy 171.391434 98.17142) - (xy 171.528366 98.250477) (xy 171.681093 98.2914) (xy 171.681095 98.2914) (xy 171.839205 98.2914) - (xy 171.839207 98.2914) (xy 171.991934 98.250477) (xy 172.128866 98.17142) (xy 172.24067 98.059616) - (xy 172.319727 97.922684) (xy 172.36065 97.769957) (xy 172.36065 97.611843) (xy 172.319727 97.459116) - (xy 172.24067 97.322184) (xy 172.128866 97.21038) (xy 171.991934 97.131323) (xy 171.839207 97.0904) - (xy 171.681093 97.0904) (xy 171.528366 97.131323) (xy 171.391434 97.21038) (xy 171.27963 97.322184) - (xy 171.200573 97.459116) (xy 171.15965 97.611843) (xy 153.027701 97.611843) (xy 153.047964 97.601519) - (xy 153.063451 97.6003) (xy 153.135605 97.6003) (xy 153.135607 97.6003) (xy 153.288334 97.559377) - (xy 153.425266 97.48032) (xy 153.53707 97.368516) (xy 153.616127 97.231584) (xy 153.65705 97.078857) - (xy 153.65705 96.920743) (xy 153.616127 96.768016) (xy 153.53707 96.631084) (xy 153.425266 96.51928) - (xy 153.288334 96.440223) (xy 153.135607 96.3993) (xy 152.977493 96.3993) (xy 152.824766 96.440223) - (xy 152.687834 96.51928) (xy 152.57603 96.631084) (xy 152.496973 96.768016) (xy 152.459834 96.906623) - (xy 152.45605 96.920744) (xy 152.45605 96.992899) (xy 152.437143 97.05109) (xy 152.427054 97.062903) - (xy 150.346453 99.143504) (xy 150.291936 99.171281) (xy 150.276449 99.1725) (xy 142.820951 99.1725) - (xy 142.76276 99.153593) (xy 142.726796 99.104093) (xy 142.726796 99.042907) (xy 142.750947 99.003496) - (xy 143.215988 98.538455) (xy 144.615892 97.138549) (xy 144.637889 97.123864) (xy 144.637114 97.122521) - (xy 144.642731 97.119277) (xy 144.642734 97.119277) (xy 144.779666 97.04022) (xy 144.89147 96.928416) - (xy 144.970527 96.791484) (xy 145.01145 96.638757) (xy 145.01145 96.480643) (xy 144.970527 96.327916) - (xy 144.89147 96.190984) (xy 144.779666 96.07918) (xy 144.642734 96.000123) (xy 144.490007 95.9592) - (xy 144.331893 95.9592) (xy 144.179166 96.000123) (xy 144.042234 96.07918) (xy 143.93043 96.190984) - (xy 143.851373 96.327916) (xy 143.811542 96.47657) (xy 143.81045 96.480644) (xy 143.81045 96.638759) - (xy 143.832098 96.719555) (xy 143.828895 96.780656) (xy 143.806475 96.81518) (xy 142.386827 98.234828) - (xy 142.33231 98.262605) (xy 142.271878 98.253034) (xy 142.231086 98.214322) (xy 142.223271 98.200786) - (xy 142.22327 98.200784) (xy 142.111466 98.08898) (xy 141.974534 98.009923) (xy 141.821807 97.969) - (xy 141.663693 97.969) (xy 141.66355 97.969) (xy 141.605359 97.950093) (xy 141.593546 97.940004) - (xy 138.680547 95.027004) (xy 138.65277 94.972487) (xy 138.662341 94.912055) (xy 138.705606 94.86879) - (xy 138.750551 94.858) (xy 202.270849 94.858) (xy 202.32904 94.876907) (xy 202.340853 94.886996) - (xy 209.585455 102.131598) (xy 209.613232 102.186115) (xy 209.603661 102.246547) (xy 209.560396 102.289811) - (xy 209.463666 102.339097) (xy 209.463659 102.339101) (xy 209.376873 102.402155) (xy 209.317149 102.445547) - (xy 209.189097 102.573599) (xy 209.151448 102.625419) (xy 209.082652 102.720108) (xy 209.000438 102.881462) - (xy 208.944478 103.053693) (xy 208.91615 103.23255) (xy 208.91615 103.413649) (xy 208.944478 103.592506) - (xy 209.000438 103.764737) (xy 209.071576 103.904354) (xy 209.082654 103.926094) (xy 209.189097 104.072601) - (xy 209.317149 104.200653) (xy 209.463656 104.307096) (xy 209.463658 104.307097) (xy 209.601175 104.377166) - (xy 209.64444 104.420431) (xy 209.654011 104.480863) (xy 209.626233 104.53538) (xy 209.586824 104.55953) - (xy 209.548438 104.572002) (xy 209.359097 104.668475) (xy 209.187185 104.793377) (xy 209.036927 104.943635) - (xy 208.912025 105.115547) (xy 208.815554 105.304884) (xy 208.749891 105.506977) (xy 208.739418 105.573099) - (xy 208.739419 105.5731) (xy 209.787504 105.5731) (xy 209.74902 105.639757) (xy 209.71665 105.760565) - (xy 209.71665 105.885635) (xy 209.74902 106.006443) (xy 209.787504 106.0731) (xy 208.739419 106.0731) - (xy 208.749891 106.139222) (xy 208.815554 106.341315) (xy 208.912025 106.530652) (xy 209.036927 106.702564) - (xy 209.187185 106.852822) (xy 209.359098 106.977724) (xy 209.391008 106.993983) (xy 209.434273 107.037248) - (xy 209.443844 107.09768) (xy 209.416067 107.152197) (xy 209.36155 107.179974) (xy 209.357869 107.180487) - (xy 209.335083 107.183223) (xy 209.19431 107.238737) (xy 209.194306 107.23874) (xy 209.073731 107.330175) - (xy 209.073725 107.330181) (xy 208.98229 107.450756) (xy 208.982287 107.45076) (xy 208.926773 107.591534) - (xy 208.91615 107.679993) (xy 208.91615 108.966206) (xy 208.926773 109.054665) (xy 208.982287 109.195439) - (xy 208.982288 109.195441) (xy 208.982289 109.195442) (xy 209.073728 109.316022) (xy 209.194308 109.407461) - (xy 209.194309 109.407461) (xy 209.19431 109.407462) (xy 209.224185 109.419243) (xy 209.335086 109.462977) - (xy 209.423548 109.4736) (xy 209.42355 109.4736) (xy 210.95975 109.4736) (xy 210.959752 109.4736) - (xy 211.048214 109.462977) (xy 211.188992 109.407461) (xy 211.309572 109.316022) (xy 211.401011 109.195442) - (xy 211.456527 109.054664) (xy 211.46715 108.966202) (xy 211.46715 107.679998) (xy 211.456527 107.591536) - (xy 211.401011 107.450758) (xy 211.309572 107.330178) (xy 211.188992 107.238739) (xy 211.188991 107.238738) - (xy 211.188989 107.238737) (xy 211.048216 107.183223) (xy 211.025431 107.180487) (xy 210.96991 107.154775) - (xy 210.940105 107.10134) (xy 210.947401 107.040591) (xy 210.989011 106.995733) (xy 210.992292 106.993983) - (xy 211.024199 106.977725) (xy 211.0242 106.977725) (xy 211.196114 106.852822) (xy 211.346372 106.702564) - (xy 211.471274 106.530652) (xy 211.567745 106.341315) (xy 211.633408 106.139222) (xy 211.643881 106.0731) - (xy 210.595796 106.0731) (xy 210.63428 106.006443) (xy 210.66665 105.885635) (xy 210.66665 105.760565) - (xy 210.63428 105.639757) (xy 210.595796 105.5731) (xy 211.643881 105.5731) (xy 211.643881 105.573099) - (xy 211.633408 105.506977) (xy 211.567745 105.304884) (xy 211.471274 105.115547) (xy 211.346372 104.943635) - (xy 211.196114 104.793377) (xy 211.024202 104.668475) (xy 210.834859 104.572001) (xy 210.796476 104.55953) - (xy 210.746976 104.523566) (xy 210.728069 104.465376) (xy 210.746977 104.407185) (xy 210.782122 104.377166) - (xy 210.919644 104.307096) (xy 211.066151 104.200653) (xy 211.194203 104.072601) (xy 211.300646 103.926094) - (xy 211.382861 103.764739) (xy 211.438821 103.592509) (xy 211.456321 103.482016) (xy 211.46715 103.413649) - (xy 211.46715 103.23255) (xy 211.448264 103.113312) (xy 211.438821 103.053691) (xy 211.382861 102.881461) - (xy 211.300646 102.720106) (xy 211.194203 102.573599) (xy 211.066151 102.445547) (xy 210.919644 102.339104) - (xy 210.919643 102.339103) (xy 210.919641 102.339102) (xy 210.758289 102.256889) (xy 210.660557 102.225134) - (xy 210.611057 102.18917) (xy 210.59215 102.130979) (xy 210.59215 102.118674) (xy 210.59215 102.118673) - (xy 210.564857 102.016813) (xy 210.564857 102.016812) (xy 210.564857 102.016811) (xy 210.512133 101.925491) - (xy 210.512131 101.925489) (xy 210.51213 101.925487) (xy 202.723663 94.13702) (xy 202.72366 94.137018) - (xy 202.723658 94.137016) (xy 202.632341 94.084294) (xy 202.632343 94.084294) (xy 202.58419 94.071392) - (xy 202.530477 94.057) (xy 202.530475 94.057) (xy 174.770509 94.057) (xy 174.712318 94.038093) (xy 174.676354 93.988593) - (xy 174.676354 93.927407) (xy 174.712318 93.877907) (xy 174.725564 93.86979) (xy 174.807487 93.828047) + (xy 131.696406 130.082127) (xy 131.75964 129.887514) (xy 131.768259 129.8331) (xy 130.924662 129.8331) + (xy 130.957575 129.776093) (xy 130.99165 129.648926) (xy 130.99165 129.517274) (xy 130.984203 129.489481) + (xy 132.08115 129.489481) (xy 132.08115 129.676718) (xy 132.117676 129.860349) (xy 132.189327 130.033329) + (xy 132.189331 130.033338) (xy 132.263715 130.144659) (xy 132.293348 130.189008) (xy 132.425742 130.321402) + (xy 132.492113 130.365749) (xy 132.581411 130.425418) (xy 132.581417 130.42542) (xy 132.581419 130.425422) + (xy 132.754399 130.497073) (xy 132.938034 130.5336) (xy 132.938035 130.5336) (xy 133.125265 130.5336) + (xy 133.125266 130.5336) (xy 133.308901 130.497073) (xy 133.481881 130.425422) (xy 133.481884 130.425419) + (xy 133.481888 130.425418) (xy 133.526837 130.395382) (xy 133.637558 130.321402) (xy 133.769952 130.189008) + (xy 133.863486 130.049025) (xy 133.873968 130.033338) (xy 133.873969 130.033334) (xy 133.873972 130.033331) + (xy 133.945623 129.860351) (xy 133.98215 129.676716) (xy 133.98215 129.489484) (xy 133.982149 129.489481) + (xy 137.16115 129.489481) (xy 137.16115 129.676718) (xy 137.197676 129.860349) (xy 137.269327 130.033329) + (xy 137.269331 130.033338) (xy 137.343715 130.144659) (xy 137.373348 130.189008) (xy 137.505742 130.321402) + (xy 137.572113 130.365749) (xy 137.661411 130.425418) (xy 137.661417 130.42542) (xy 137.661419 130.425422) + (xy 137.834399 130.497073) (xy 138.018034 130.5336) (xy 138.018035 130.5336) (xy 138.205265 130.5336) + (xy 138.205266 130.5336) (xy 138.388901 130.497073) (xy 138.561881 130.425422) (xy 138.561884 130.425419) + (xy 138.561888 130.425418) (xy 138.606837 130.395382) (xy 138.717558 130.321402) (xy 138.849952 130.189008) + (xy 138.943486 130.049025) (xy 138.953968 130.033338) (xy 138.953969 130.033334) (xy 138.953972 130.033331) + (xy 139.025623 129.860351) (xy 139.06215 129.676716) (xy 139.06215 129.489484) (xy 139.062149 129.489481) + (xy 139.70115 129.489481) (xy 139.70115 129.676718) (xy 139.737676 129.860349) (xy 139.809327 130.033329) + (xy 139.809331 130.033338) (xy 139.883715 130.144659) (xy 139.913348 130.189008) (xy 140.045742 130.321402) + (xy 140.112113 130.365749) (xy 140.201411 130.425418) (xy 140.201417 130.42542) (xy 140.201419 130.425422) + (xy 140.374399 130.497073) (xy 140.558034 130.5336) (xy 140.558035 130.5336) (xy 140.745265 130.5336) + (xy 140.745266 130.5336) (xy 140.928901 130.497073) (xy 141.101881 130.425422) (xy 141.101884 130.425419) + (xy 141.101888 130.425418) (xy 141.146837 130.395382) (xy 141.257558 130.321402) (xy 141.389952 130.189008) + (xy 141.483486 130.049025) (xy 141.493968 130.033338) (xy 141.493969 130.033334) (xy 141.493972 130.033331) + (xy 141.565623 129.860351) (xy 141.60215 129.676716) (xy 141.60215 129.489484) (xy 141.602149 129.489481) + (xy 142.24115 129.489481) (xy 142.24115 129.676718) (xy 142.277676 129.860349) (xy 142.349327 130.033329) + (xy 142.349331 130.033338) (xy 142.423715 130.144659) (xy 142.453348 130.189008) (xy 142.585742 130.321402) + (xy 142.652113 130.365749) (xy 142.741411 130.425418) (xy 142.741417 130.42542) (xy 142.741419 130.425422) + (xy 142.914399 130.497073) (xy 143.098034 130.5336) (xy 143.098035 130.5336) (xy 143.285265 130.5336) + (xy 143.285266 130.5336) (xy 143.468901 130.497073) (xy 143.641881 130.425422) (xy 143.641884 130.425419) + (xy 143.641888 130.425418) (xy 143.686837 130.395382) (xy 143.797558 130.321402) (xy 143.929952 130.189008) + (xy 144.023486 130.049025) (xy 144.033968 130.033338) (xy 144.033969 130.033334) (xy 144.033972 130.033331) + (xy 144.105623 129.860351) (xy 144.14215 129.676716) (xy 144.14215 129.489484) (xy 144.142149 129.489481) + (xy 144.78115 129.489481) (xy 144.78115 129.676718) (xy 144.817676 129.860349) (xy 144.889327 130.033329) + (xy 144.889331 130.033338) (xy 144.963715 130.144659) (xy 144.993348 130.189008) (xy 145.125742 130.321402) + (xy 145.192113 130.365749) (xy 145.281411 130.425418) (xy 145.281417 130.42542) (xy 145.281419 130.425422) + (xy 145.454399 130.497073) (xy 145.638034 130.5336) (xy 145.638035 130.5336) (xy 145.825265 130.5336) + (xy 145.825266 130.5336) (xy 146.008901 130.497073) (xy 146.181881 130.425422) (xy 146.181884 130.425419) + (xy 146.181888 130.425418) (xy 146.226837 130.395382) (xy 146.337558 130.321402) (xy 146.469952 130.189008) + (xy 146.563486 130.049025) (xy 146.573968 130.033338) (xy 146.573969 130.033334) (xy 146.573972 130.033331) + (xy 146.645623 129.860351) (xy 146.68215 129.676716) (xy 146.68215 129.489484) (xy 146.682149 129.489481) + (xy 147.32115 129.489481) (xy 147.32115 129.676718) (xy 147.357676 129.860349) (xy 147.429327 130.033329) + (xy 147.429331 130.033338) (xy 147.503715 130.144659) (xy 147.533348 130.189008) (xy 147.665742 130.321402) + (xy 147.732113 130.365749) (xy 147.821411 130.425418) (xy 147.821417 130.42542) (xy 147.821419 130.425422) + (xy 147.994399 130.497073) (xy 148.178034 130.5336) (xy 148.178035 130.5336) (xy 148.365265 130.5336) + (xy 148.365266 130.5336) (xy 148.548901 130.497073) (xy 148.721881 130.425422) (xy 148.721884 130.425419) + (xy 148.721888 130.425418) (xy 148.766837 130.395382) (xy 148.877558 130.321402) (xy 149.009952 130.189008) + (xy 149.103486 130.049025) (xy 149.113968 130.033338) (xy 149.113969 130.033334) (xy 149.113972 130.033331) + (xy 149.185623 129.860351) (xy 149.22215 129.676716) (xy 149.22215 129.489484) (xy 149.222149 129.489481) + (xy 149.86115 129.489481) (xy 149.86115 129.676718) (xy 149.897676 129.860349) (xy 149.969327 130.033329) + (xy 149.969331 130.033338) (xy 150.043715 130.144659) (xy 150.073348 130.189008) (xy 150.205742 130.321402) + (xy 150.272113 130.365749) (xy 150.361411 130.425418) (xy 150.361417 130.42542) (xy 150.361419 130.425422) + (xy 150.534399 130.497073) (xy 150.718034 130.5336) (xy 150.718035 130.5336) (xy 150.905265 130.5336) + (xy 150.905266 130.5336) (xy 151.088901 130.497073) (xy 151.261881 130.425422) (xy 151.261884 130.425419) + (xy 151.261888 130.425418) (xy 151.306837 130.395382) (xy 151.417558 130.321402) (xy 151.549952 130.189008) + (xy 151.643486 130.049025) (xy 151.653968 130.033338) (xy 151.653969 130.033334) (xy 151.653972 130.033331) + (xy 151.725623 129.860351) (xy 151.76215 129.676716) (xy 151.76215 129.56143) (xy 158.875 129.56143) + (xy 158.875 130.154999) (xy 158.875001 130.155) (xy 159.525 130.155) (xy 159.525 130.655) (xy 158.875001 130.655) + (xy 158.875 130.655001) (xy 158.875 131.248569) (xy 158.911508 131.432104) (xy 158.911508 131.432106) + (xy 158.983118 131.604989) (xy 158.983124 131.605001) (xy 159.087087 131.760589) (xy 159.08709 131.760593) + (xy 159.219406 131.892909) (xy 159.21941 131.892912) (xy 159.374998 131.996875) (xy 159.37501 131.996881) + (xy 159.547888 132.068489) (xy 159.547899 132.068492) (xy 159.575 132.073882) (xy 159.575 131.321988) + (xy 159.58494 131.339205) (xy 159.640795 131.39506) (xy 159.709204 131.434556) (xy 159.785504 131.455) + (xy 159.864496 131.455) (xy 159.940796 131.434556) (xy 160.009205 131.39506) (xy 160.06506 131.339205) + (xy 160.075 131.321988) (xy 160.075 132.073881) (xy 160.1021 132.068492) (xy 160.102111 132.068489) + (xy 160.274989 131.996881) (xy 160.275001 131.996875) (xy 160.430589 131.892912) (xy 160.430593 131.892909) + (xy 160.562909 131.760593) (xy 160.562912 131.760589) (xy 160.666879 131.604994) (xy 160.671571 131.593666) + (xy 160.711306 131.547139) (xy 160.770801 131.532854) (xy 160.800922 131.540085) (xy 160.927065 131.592335) + (xy 161.091279 131.624999) (xy 161.091283 131.625) (xy 161.258717 131.625) (xy 161.25872 131.624999) + (xy 161.422933 131.592335) (xy 161.422939 131.592333) (xy 161.575559 131.529114) (xy 160.998223 130.951777) + (xy 160.781664 130.735218) (xy 160.975 130.735218) (xy 160.975 130.814782) (xy 161.005448 130.888291) + (xy 161.061709 130.944552) (xy 161.135218 130.975) (xy 161.214782 130.975) (xy 161.288291 130.944552) + (xy 161.344552 130.888291) (xy 161.375 130.814782) (xy 161.375 130.735218) (xy 161.344552 130.661709) + (xy 161.288291 130.605448) (xy 161.214782 130.575) (xy 161.135218 130.575) (xy 161.061709 130.605448) + (xy 161.005448 130.661709) (xy 160.975 130.735218) (xy 160.781664 130.735218) (xy 160.392939 130.346493) + (xy 160.365162 130.291976) (xy 160.374733 130.231544) (xy 160.39294 130.206485) (xy 160.499425 130.1) + (xy 160.853555 130.1) (xy 161.175 130.421445) (xy 161.496445 130.1) (xy 161.175 129.778555) (xy 160.853555 130.1) + (xy 160.499425 130.1) (xy 160.392939 129.993514) (xy 160.365162 129.938997) (xy 160.374733 129.878565) + (xy 160.392939 129.853506) (xy 160.821445 129.425) (xy 160.819068 129.422623) (xy 160.819066 129.42262) + (xy 160.781664 129.385218) (xy 160.975 129.385218) (xy 160.975 129.464782) (xy 161.005448 129.538291) + (xy 161.061709 129.594552) (xy 161.135218 129.625) (xy 161.214782 129.625) (xy 161.288291 129.594552) + (xy 161.344552 129.538291) (xy 161.375 129.464782) (xy 161.375 129.385218) (xy 161.364185 129.359108) + (xy 161.5245 129.359108) (xy 161.5245 129.490892) (xy 161.552275 129.594552) (xy 161.558609 129.61819) + (xy 161.624496 129.732309) (xy 161.624498 129.732311) (xy 161.6245 129.732314) (xy 161.717686 129.8255) + (xy 161.724998 129.829721) (xy 161.765939 129.875187) (xy 161.7745 129.915458) (xy 161.7745 130.28454) + (xy 161.755593 130.342731) (xy 161.725003 130.370275) (xy 161.717688 130.374498) (xy 161.624496 130.46769) + (xy 161.558609 130.581809) (xy 161.558608 130.581814) (xy 161.5245 130.709108) (xy 161.5245 130.840892) + (xy 161.542897 130.90955) (xy 161.558609 130.96819) (xy 161.624496 131.082309) (xy 161.624498 131.082311) + (xy 161.6245 131.082314) (xy 161.717686 131.1755) (xy 161.717688 131.175501) (xy 161.71769 131.175503) + (xy 161.83181 131.24139) (xy 161.831808 131.24139) (xy 161.831812 131.241391) (xy 161.831814 131.241392) + (xy 161.959108 131.2755) (xy 161.95911 131.2755) (xy 162.09089 131.2755) (xy 162.090892 131.2755) + (xy 162.099045 131.273315) (xy 162.160144 131.276513) (xy 162.194676 131.298936) (xy 162.887635 131.991895) + (xy 162.887636 131.991897) (xy 162.958103 132.062364) (xy 162.99624 132.07816) (xy 163.035621 132.094473) + (xy 163.05017 132.1005) (xy 163.050173 132.100501) (xy 163.050176 132.100501) (xy 163.161351 132.100501) + (xy 163.161359 132.1005) (xy 165.749829 132.1005) (xy 165.814092 132.073881) (xy 165.841897 132.062364) + (xy 166.416895 131.487364) (xy 166.416897 131.487364) (xy 166.457291 131.446969) (xy 166.48145 131.434661) + (xy 166.511803 131.419195) (xy 166.511806 131.419195) (xy 166.540519 131.423742) (xy 166.572235 131.428766) + (xy 166.572236 131.428766) (xy 166.572238 131.428767) (xy 166.572239 131.428768) (xy 166.582292 131.434661) + (xy 166.722371 131.528258) (xy 166.72237 131.528258) (xy 166.877065 131.592335) (xy 167.041279 131.624999) + (xy 167.041283 131.625) (xy 167.208717 131.625) (xy 167.20872 131.624999) (xy 167.372934 131.592335) + (xy 167.499077 131.540085) (xy 167.560074 131.535284) (xy 167.612243 131.567254) (xy 167.628426 131.593661) + (xy 167.633119 131.60499) (xy 167.633124 131.605001) (xy 167.737087 131.760589) (xy 167.73709 131.760593) + (xy 167.869406 131.892909) (xy 167.86941 131.892912) (xy 168.024998 131.996875) (xy 168.02501 131.996881) + (xy 168.197888 132.068489) (xy 168.197899 132.068492) (xy 168.225 132.073882) (xy 168.225 131.321988) + (xy 168.23494 131.339205) (xy 168.290795 131.39506) (xy 168.359204 131.434556) (xy 168.435504 131.455) + (xy 168.514496 131.455) (xy 168.590796 131.434556) (xy 168.659205 131.39506) (xy 168.71506 131.339205) + (xy 168.725 131.321988) (xy 168.725 132.073881) (xy 168.7521 132.068492) (xy 168.752111 132.068489) + (xy 168.924989 131.996881) (xy 168.925001 131.996875) (xy 169.080589 131.892912) (xy 169.080593 131.892909) + (xy 169.212909 131.760593) (xy 169.212912 131.760589) (xy 169.316875 131.605001) (xy 169.316881 131.604989) + (xy 169.388491 131.432106) (xy 169.388491 131.432104) (xy 169.424999 131.248569) (xy 169.425 131.248565) + (xy 169.425 130.655001) (xy 169.424999 130.655) (xy 168.775 130.655) (xy 168.775 130.155) (xy 169.424999 130.155) + (xy 169.425 130.154999) (xy 169.425 129.561434) (xy 169.424999 129.56143) (xy 169.388491 129.377895) + (xy 169.388491 129.377893) (xy 169.316881 129.20501) (xy 169.316875 129.204998) (xy 169.212912 129.04941) + (xy 169.212909 129.049406) (xy 169.080593 128.91709) (xy 169.080589 128.917087) (xy 168.925001 128.813124) + (xy 168.924992 128.81312) (xy 168.752105 128.741508) (xy 168.725 128.736116) (xy 168.725 129.488011) + (xy 168.71506 129.470795) (xy 168.659205 129.41494) (xy 168.590796 129.375444) (xy 168.514496 129.355) + (xy 168.435504 129.355) (xy 168.359204 129.375444) (xy 168.290795 129.41494) (xy 168.23494 129.470795) + (xy 168.225 129.488011) (xy 168.225 128.736116) (xy 168.197894 128.741508) (xy 168.025006 128.81312) + (xy 167.928306 128.877733) (xy 167.926618 128.894871) (xy 167.934837 128.911002) (xy 167.925266 128.971434) + (xy 167.90706 128.996492) (xy 167.478554 129.424999) (xy 167.478554 129.425) (xy 167.90706 129.853507) + (xy 167.934837 129.908023) (xy 167.925266 129.968455) (xy 167.90706 129.993513) (xy 167.800574 130.099999) + (xy 167.90706 130.206485) (xy 167.934837 130.261002) (xy 167.925266 130.321434) (xy 167.90706 130.346493) + (xy 167.37178 130.881773) (xy 167.317263 130.90955) (xy 167.279304 130.903538) (xy 167.294552 130.888291) + (xy 167.325 130.814782) (xy 167.325 130.735218) (xy 167.294552 130.661709) (xy 167.238291 130.605448) + (xy 167.164782 130.575) (xy 167.085218 130.575) (xy 167.011709 130.605448) (xy 166.955448 130.661709) + (xy 166.925 130.735218) (xy 166.925 130.814782) (xy 166.955448 130.888291) (xy 166.972319 130.905162) + (xy 166.96371 130.90955) (xy 166.948223 130.907097) (xy 166.932736 130.90955) (xy 166.918763 130.90243) + (xy 166.903278 130.899978) (xy 166.878219 130.881773) (xy 166.804496 130.80805) (xy 166.776719 130.753533) + (xy 166.7755 130.738046) (xy 166.7755 130.709109) (xy 166.771709 130.694961) (xy 166.741392 130.581814) + (xy 166.74139 130.581811) (xy 166.74139 130.581809) (xy 166.675503 130.46769) (xy 166.675501 130.467688) + (xy 166.6755 130.467686) (xy 166.582314 130.3745) (xy 166.582311 130.374498) (xy 166.582309 130.374496) + (xy 166.468189 130.308609) (xy 166.468191 130.308609) (xy 166.406114 130.291976) (xy 166.340892 130.2745) + (xy 166.209108 130.2745) (xy 166.143886 130.291976) (xy 166.081809 130.308609) (xy 165.96769 130.374496) + (xy 165.967689 130.374497) (xy 165.967686 130.374499) (xy 165.967686 130.3745) (xy 165.920001 130.422184) + (xy 165.865487 130.44996) (xy 165.805055 130.440389) (xy 165.779999 130.422185) (xy 165.732314 130.3745) + (xy 165.732311 130.374498) (xy 165.732309 130.374496) (xy 165.618189 130.308609) (xy 165.618191 130.308609) + (xy 165.556114 130.291976) (xy 165.490892 130.2745) (xy 165.359108 130.2745) (xy 165.293886 130.291976) + (xy 165.231809 130.308609) (xy 165.11769 130.374496) (xy 165.117689 130.374497) (xy 165.117686 130.374499) + (xy 165.117686 130.3745) (xy 165.070001 130.422184) (xy 165.015487 130.44996) (xy 164.955055 130.440389) + (xy 164.929999 130.422185) (xy 164.882314 130.3745) (xy 164.882311 130.374498) (xy 164.882309 130.374496) + (xy 164.768189 130.308609) (xy 164.768191 130.308609) (xy 164.706114 130.291976) (xy 164.640892 130.2745) + (xy 164.568767 130.2745) (xy 164.546719 130.267336) (xy 164.523822 130.26371) (xy 164.518173 130.258061) + (xy 164.510576 130.255593) (xy 164.496947 130.236834) (xy 164.480558 130.220445) (xy 164.479308 130.212557) + (xy 164.474612 130.206093) (xy 164.474612 130.182905) (xy 164.470986 130.160013) (xy 164.474612 130.152896) + (xy 164.474612 130.144907) (xy 164.498763 130.105497) (xy 164.50426 130.1) (xy 166.803555 130.1) + (xy 167.125 130.421445) (xy 167.446445 130.1) (xy 167.125 129.778555) (xy 166.803555 130.1) (xy 164.50426 130.1) + (xy 164.57093 130.033329) (xy 164.673865 129.930393) (xy 164.718243 129.904773) (xy 164.768186 129.891392) + (xy 164.882314 129.8255) (xy 164.929998 129.777815) (xy 164.984513 129.75004) (xy 165.044945 129.759611) + (xy 165.07 129.777814) (xy 165.117686 129.8255) (xy 165.117688 129.825501) (xy 165.11769 129.825503) + (xy 165.23181 129.89139) (xy 165.231808 129.89139) (xy 165.231812 129.891391) (xy 165.231814 129.891392) + (xy 165.359108 129.9255) (xy 165.35911 129.9255) (xy 165.49089 129.9255) (xy 165.490892 129.9255) + (xy 165.618186 129.891392) (xy 165.618188 129.89139) (xy 165.61819 129.89139) (xy 165.732309 129.825503) + (xy 165.732309 129.825502) (xy 165.732314 129.8255) (xy 165.779998 129.777815) (xy 165.834513 129.75004) + (xy 165.894945 129.759611) (xy 165.92 129.777814) (xy 165.967686 129.8255) (xy 165.967688 129.825501) + (xy 165.96769 129.825503) (xy 166.08181 129.89139) (xy 166.081808 129.89139) (xy 166.081812 129.891391) + (xy 166.081814 129.891392) (xy 166.209108 129.9255) (xy 166.20911 129.9255) (xy 166.34089 129.9255) + (xy 166.340892 129.9255) (xy 166.468186 129.891392) (xy 166.468188 129.89139) (xy 166.46819 129.89139) + (xy 166.582309 129.825503) (xy 166.582309 129.825502) (xy 166.582314 129.8255) (xy 166.6755 129.732314) + (xy 166.679554 129.725293) (xy 166.74139 129.61819) (xy 166.74139 129.618188) (xy 166.741392 129.618186) + (xy 166.7755 129.490892) (xy 166.7755 129.385218) (xy 166.925 129.385218) (xy 166.925 129.464782) + (xy 166.955448 129.538291) (xy 167.011709 129.594552) (xy 167.085218 129.625) (xy 167.164782 129.625) + (xy 167.238291 129.594552) (xy 167.294552 129.538291) (xy 167.325 129.464782) (xy 167.325 129.385218) + (xy 167.294552 129.311709) (xy 167.238291 129.255448) (xy 167.164782 129.225) (xy 167.085218 129.225) + (xy 167.011709 129.255448) (xy 166.955448 129.311709) (xy 166.925 129.385218) (xy 166.7755 129.385218) + (xy 166.7755 129.359108) (xy 166.741392 129.231814) (xy 166.74139 129.231811) (xy 166.74139 129.231809) + (xy 166.675503 129.11769) (xy 166.675501 129.117688) (xy 166.6755 129.117686) (xy 166.582314 129.0245) + (xy 166.582311 129.024498) (xy 166.582309 129.024496) (xy 166.468189 128.958609) (xy 166.468191 128.958609) + (xy 166.406114 128.941976) (xy 166.340892 128.9245) (xy 166.209108 128.9245) (xy 166.143886 128.941976) + (xy 166.081809 128.958609) (xy 165.96769 129.024496) (xy 165.967689 129.024497) (xy 165.967686 129.024499) + (xy 165.967686 129.0245) (xy 165.920001 129.072184) (xy 165.865487 129.09996) (xy 165.805055 129.090389) + (xy 165.779999 129.072185) (xy 165.732314 129.0245) (xy 165.732311 129.024498) (xy 165.732309 129.024496) + (xy 165.618189 128.958609) (xy 165.618191 128.958609) (xy 165.556114 128.941976) (xy 165.490892 128.9245) + (xy 165.359108 128.9245) (xy 165.293886 128.941976) (xy 165.231809 128.958609) (xy 165.11769 129.024496) + (xy 165.117689 129.024497) (xy 165.117686 129.024499) (xy 165.117686 129.0245) (xy 165.070001 129.072184) + (xy 165.015487 129.09996) (xy 164.955055 129.090389) (xy 164.929999 129.072185) (xy 164.882314 129.0245) + (xy 164.882311 129.024498) (xy 164.882309 129.024496) (xy 164.768189 128.958609) (xy 164.768191 128.958609) + (xy 164.706114 128.941976) (xy 164.640892 128.9245) (xy 164.509108 128.9245) (xy 164.443886 128.941976) + (xy 164.381809 128.958609) (xy 164.26769 129.024496) (xy 164.267689 129.024497) (xy 164.267686 129.024499) + (xy 164.267686 129.0245) (xy 164.220001 129.072184) (xy 164.165487 129.09996) (xy 164.105055 129.090389) + (xy 164.079999 129.072185) (xy 164.032314 129.0245) (xy 164.032311 129.024498) (xy 164.032309 129.024496) + (xy 163.918189 128.958609) (xy 163.918191 128.958609) (xy 163.856114 128.941976) (xy 163.790892 128.9245) + (xy 163.659108 128.9245) (xy 163.593886 128.941976) (xy 163.531809 128.958609) (xy 163.41769 129.024496) + (xy 163.417689 129.024497) (xy 163.417686 129.024499) (xy 163.417686 129.0245) (xy 163.370001 129.072184) + (xy 163.315487 129.09996) (xy 163.255055 129.090389) (xy 163.229999 129.072185) (xy 163.182314 129.0245) + (xy 163.182311 129.024498) (xy 163.182309 129.024496) (xy 163.068189 128.958609) (xy 163.068191 128.958609) + (xy 163.006114 128.941976) (xy 162.940892 128.9245) (xy 162.809108 128.9245) (xy 162.743886 128.941976) + (xy 162.681809 128.958609) (xy 162.56769 129.024496) (xy 162.567689 129.024497) (xy 162.567686 129.024499) + (xy 162.567686 129.0245) (xy 162.520001 129.072184) (xy 162.465487 129.09996) (xy 162.405055 129.090389) + (xy 162.379999 129.072185) (xy 162.332314 129.0245) (xy 162.332311 129.024498) (xy 162.332309 129.024496) + (xy 162.218189 128.958609) (xy 162.218191 128.958609) (xy 162.156114 128.941976) (xy 162.090892 128.9245) + (xy 161.959108 128.9245) (xy 161.893886 128.941976) (xy 161.831809 128.958609) (xy 161.71769 129.024496) + (xy 161.624496 129.11769) (xy 161.558609 129.231809) (xy 161.546049 129.278685) (xy 161.5245 129.359108) + (xy 161.364185 129.359108) (xy 161.344552 129.311709) (xy 161.288291 129.255448) (xy 161.214782 129.225) + (xy 161.135218 129.225) (xy 161.061709 129.255448) (xy 161.005448 129.311709) (xy 160.975 129.385218) + (xy 160.781664 129.385218) (xy 160.392939 128.996492) (xy 160.365162 128.941976) (xy 160.373089 128.891919) + (xy 160.371692 128.877733) (xy 160.274991 128.81312) (xy 160.231087 128.794934) (xy 160.102105 128.741508) + (xy 160.075 128.736116) (xy 160.075 129.488011) (xy 160.06506 129.470795) (xy 160.009205 129.41494) + (xy 159.940796 129.375444) (xy 159.864496 129.355) (xy 159.785504 129.355) (xy 159.709204 129.375444) + (xy 159.640795 129.41494) (xy 159.58494 129.470795) (xy 159.575 129.488011) (xy 159.575 128.736116) + (xy 159.547894 128.741508) (xy 159.375007 128.81312) (xy 159.374998 128.813124) (xy 159.21941 128.917087) + (xy 159.219406 128.91709) (xy 159.08709 129.049406) (xy 159.087087 129.04941) (xy 158.983124 129.204998) + (xy 158.983118 129.20501) (xy 158.911508 129.377893) (xy 158.911508 129.377895) (xy 158.875 129.56143) + (xy 151.76215 129.56143) (xy 151.76215 129.489484) (xy 151.725623 129.305849) (xy 151.653972 129.132869) + (xy 151.65397 129.132867) (xy 151.653968 129.132861) (xy 151.58156 129.024497) (xy 151.549952 128.977192) + (xy 151.417558 128.844798) (xy 151.373209 128.815165) (xy 151.261888 128.740781) (xy 151.261879 128.740777) + (xy 151.093141 128.670883) (xy 160.774438 128.670883) (xy 161.175 129.071445) (xy 161.57556 128.670884) + (xy 161.57556 128.670883) (xy 166.724438 128.670883) (xy 167.125 129.071445) (xy 167.52556 128.670884) + (xy 167.52556 128.670883) (xy 167.372936 128.607665) (xy 167.20872 128.575) (xy 167.041279 128.575) + (xy 166.877064 128.607665) (xy 166.877062 128.607665) (xy 166.724438 128.670883) (xy 161.57556 128.670883) + (xy 161.422936 128.607665) (xy 161.25872 128.575) (xy 161.091279 128.575) (xy 160.927064 128.607665) + (xy 160.927062 128.607665) (xy 160.774438 128.670883) (xy 151.093141 128.670883) (xy 151.088899 128.669126) + (xy 150.905268 128.6326) (xy 150.905266 128.6326) (xy 150.718034 128.6326) (xy 150.718031 128.6326) + (xy 150.5344 128.669126) (xy 150.36142 128.740777) (xy 150.361411 128.740781) (xy 150.205742 128.844798) + (xy 150.205738 128.844801) (xy 150.073351 128.977188) (xy 150.073348 128.977192) (xy 149.969331 129.132861) + (xy 149.969327 129.13287) (xy 149.897676 129.30585) (xy 149.86115 129.489481) (xy 149.222149 129.489481) + (xy 149.185623 129.305849) (xy 149.113972 129.132869) (xy 149.11397 129.132867) (xy 149.113968 129.132861) + (xy 149.04156 129.024497) (xy 149.009952 128.977192) (xy 148.877558 128.844798) (xy 148.833209 128.815165) + (xy 148.721888 128.740781) (xy 148.721879 128.740777) (xy 148.548899 128.669126) (xy 148.365268 128.6326) + (xy 148.365266 128.6326) (xy 148.178034 128.6326) (xy 148.178031 128.6326) (xy 147.9944 128.669126) + (xy 147.82142 128.740777) (xy 147.821411 128.740781) (xy 147.665742 128.844798) (xy 147.665738 128.844801) + (xy 147.533351 128.977188) (xy 147.533348 128.977192) (xy 147.429331 129.132861) (xy 147.429327 129.13287) + (xy 147.357676 129.30585) (xy 147.32115 129.489481) (xy 146.682149 129.489481) (xy 146.645623 129.305849) + (xy 146.573972 129.132869) (xy 146.57397 129.132867) (xy 146.573968 129.132861) (xy 146.50156 129.024497) + (xy 146.469952 128.977192) (xy 146.337558 128.844798) (xy 146.293209 128.815165) (xy 146.181888 128.740781) + (xy 146.181879 128.740777) (xy 146.008899 128.669126) (xy 145.825268 128.6326) (xy 145.825266 128.6326) + (xy 145.638034 128.6326) (xy 145.638031 128.6326) (xy 145.4544 128.669126) (xy 145.28142 128.740777) + (xy 145.281411 128.740781) (xy 145.125742 128.844798) (xy 145.125738 128.844801) (xy 144.993351 128.977188) + (xy 144.993348 128.977192) (xy 144.889331 129.132861) (xy 144.889327 129.13287) (xy 144.817676 129.30585) + (xy 144.78115 129.489481) (xy 144.142149 129.489481) (xy 144.105623 129.305849) (xy 144.033972 129.132869) + (xy 144.03397 129.132867) (xy 144.033968 129.132861) (xy 143.96156 129.024497) (xy 143.929952 128.977192) + (xy 143.797558 128.844798) (xy 143.753209 128.815165) (xy 143.641888 128.740781) (xy 143.641879 128.740777) + (xy 143.468899 128.669126) (xy 143.285268 128.6326) (xy 143.285266 128.6326) (xy 143.098034 128.6326) + (xy 143.098031 128.6326) (xy 142.9144 128.669126) (xy 142.74142 128.740777) (xy 142.741411 128.740781) + (xy 142.585742 128.844798) (xy 142.585738 128.844801) (xy 142.453351 128.977188) (xy 142.453348 128.977192) + (xy 142.349331 129.132861) (xy 142.349327 129.13287) (xy 142.277676 129.30585) (xy 142.24115 129.489481) + (xy 141.602149 129.489481) (xy 141.565623 129.305849) (xy 141.493972 129.132869) (xy 141.49397 129.132867) + (xy 141.493968 129.132861) (xy 141.42156 129.024497) (xy 141.389952 128.977192) (xy 141.257558 128.844798) + (xy 141.213209 128.815165) (xy 141.101888 128.740781) (xy 141.101879 128.740777) (xy 140.928899 128.669126) + (xy 140.745268 128.6326) (xy 140.745266 128.6326) (xy 140.558034 128.6326) (xy 140.558031 128.6326) + (xy 140.3744 128.669126) (xy 140.20142 128.740777) (xy 140.201411 128.740781) (xy 140.045742 128.844798) + (xy 140.045738 128.844801) (xy 139.913351 128.977188) (xy 139.913348 128.977192) (xy 139.809331 129.132861) + (xy 139.809327 129.13287) (xy 139.737676 129.30585) (xy 139.70115 129.489481) (xy 139.062149 129.489481) + (xy 139.025623 129.305849) (xy 138.953972 129.132869) (xy 138.95397 129.132867) (xy 138.953968 129.132861) + (xy 138.88156 129.024497) (xy 138.849952 128.977192) (xy 138.717558 128.844798) (xy 138.673209 128.815165) + (xy 138.561888 128.740781) (xy 138.561879 128.740777) (xy 138.388899 128.669126) (xy 138.205268 128.6326) + (xy 138.205266 128.6326) (xy 138.018034 128.6326) (xy 138.018031 128.6326) (xy 137.8344 128.669126) + (xy 137.66142 128.740777) (xy 137.661411 128.740781) (xy 137.505742 128.844798) (xy 137.505738 128.844801) + (xy 137.373351 128.977188) (xy 137.373348 128.977192) (xy 137.269331 129.132861) (xy 137.269327 129.13287) + (xy 137.197676 129.30585) (xy 137.16115 129.489481) (xy 133.982149 129.489481) (xy 133.945623 129.305849) + (xy 133.873972 129.132869) (xy 133.87397 129.132867) (xy 133.873968 129.132861) (xy 133.80156 129.024497) + (xy 133.769952 128.977192) (xy 133.637558 128.844798) (xy 133.593209 128.815165) (xy 133.481888 128.740781) + (xy 133.481879 128.740777) (xy 133.308899 128.669126) (xy 133.125268 128.6326) (xy 133.125266 128.6326) + (xy 132.938034 128.6326) (xy 132.938031 128.6326) (xy 132.7544 128.669126) (xy 132.58142 128.740777) + (xy 132.581411 128.740781) (xy 132.425742 128.844798) (xy 132.425738 128.844801) (xy 132.293351 128.977188) + (xy 132.293348 128.977192) (xy 132.189331 129.132861) (xy 132.189327 129.13287) (xy 132.117676 129.30585) + (xy 132.08115 129.489481) (xy 130.984203 129.489481) (xy 130.957575 129.390107) (xy 130.924662 129.3331) + (xy 131.768259 129.3331) (xy 131.768259 129.333099) (xy 131.75964 129.278685) (xy 131.696406 129.084072) + (xy 131.603511 128.901753) (xy 131.483235 128.736208) (xy 131.338541 128.591514) (xy 131.172996 128.471238) + (xy 130.990677 128.378343) (xy 130.796064 128.315109) (xy 130.74165 128.30649) (xy 130.74165 129.150088) + (xy 130.684643 129.117175) (xy 130.557476 129.0831) (xy 130.425824 129.0831) (xy 130.298657 129.117175) + (xy 130.24165 129.150088) (xy 130.24165 128.306491) (xy 130.241649 128.30649) (xy 130.187235 128.315109) + (xy 129.992622 128.378343) (xy 129.810303 128.471238) (xy 129.644758 128.591514) (xy 129.500064 128.736208) + (xy 129.379788 128.901753) (xy 129.30986 129.038997) (xy 129.266595 129.082262) (xy 129.206163 129.091833) + (xy 129.151647 129.064056) (xy 129.13344 129.038997) (xy 129.063511 128.901753) (xy 128.943235 128.736208) + (xy 128.798541 128.591514) (xy 128.632996 128.471238) (xy 128.450677 128.378343) (xy 128.256064 128.315109) + (xy 128.20165 128.30649) (xy 128.20165 129.150088) (xy 128.144643 129.117175) (xy 128.017476 129.0831) + (xy 127.885824 129.0831) (xy 127.758657 129.117175) (xy 127.70165 129.150088) (xy 127.70165 128.306491) + (xy 127.701649 128.30649) (xy 127.647235 128.315109) (xy 127.452622 128.378343) (xy 127.270303 128.471238) + (xy 127.104758 128.591514) (xy 126.960064 128.736208) (xy 126.839788 128.901753) (xy 126.746893 129.084072) + (xy 126.683659 129.278685) (xy 126.67504 129.333099) (xy 126.331043 129.333099) (xy 126.325623 129.305849) + (xy 126.253972 129.132869) (xy 126.25397 129.132867) (xy 126.253968 129.132861) (xy 126.18156 129.024497) + (xy 126.149952 128.977192) (xy 126.017558 128.844798) (xy 125.973209 128.815165) (xy 125.861888 128.740781) + (xy 125.861879 128.740777) (xy 125.688899 128.669126) (xy 125.505268 128.6326) (xy 125.505266 128.6326) + (xy 125.318034 128.6326) (xy 125.318031 128.6326) (xy 125.1344 128.669126) (xy 124.96142 128.740777) + (xy 124.961411 128.740781) (xy 124.805742 128.844798) (xy 124.805738 128.844801) (xy 124.673351 128.977188) + (xy 124.673348 128.977192) (xy 124.569331 129.132861) (xy 124.569327 129.13287) (xy 124.497676 129.30585) + (xy 124.46115 129.489481) (xy 123.822149 129.489481) (xy 123.785623 129.305849) (xy 123.713972 129.132869) + (xy 123.71397 129.132867) (xy 123.713968 129.132861) (xy 123.64156 129.024497) (xy 123.609952 128.977192) + (xy 123.477558 128.844798) (xy 123.433209 128.815165) (xy 123.321888 128.740781) (xy 123.321879 128.740777) + (xy 123.148899 128.669126) (xy 122.965268 128.6326) (xy 122.965266 128.6326) (xy 122.778034 128.6326) + (xy 122.778031 128.6326) (xy 122.5944 128.669126) (xy 122.42142 128.740777) (xy 122.421411 128.740781) + (xy 122.265742 128.844798) (xy 122.265738 128.844801) (xy 122.133351 128.977188) (xy 122.133348 128.977192) + (xy 122.029331 129.132861) (xy 122.029327 129.13287) (xy 121.957676 129.30585) (xy 121.92115 129.489481) + (xy 121.282149 129.489481) (xy 121.245623 129.305849) (xy 121.173972 129.132869) (xy 121.17397 129.132867) + (xy 121.173968 129.132861) (xy 121.10156 129.024497) (xy 121.069952 128.977192) (xy 120.937558 128.844798) + (xy 120.893209 128.815165) (xy 120.781888 128.740781) (xy 120.781879 128.740777) (xy 120.608899 128.669126) + (xy 120.425268 128.6326) (xy 120.425266 128.6326) (xy 120.238034 128.6326) (xy 120.238031 128.6326) + (xy 120.0544 128.669126) (xy 119.88142 128.740777) (xy 119.881411 128.740781) (xy 119.725742 128.844798) + (xy 119.725738 128.844801) (xy 119.593351 128.977188) (xy 119.593348 128.977192) (xy 119.489331 129.132861) + (xy 119.489327 129.13287) (xy 119.417676 129.30585) (xy 119.38115 129.489481) (xy 118.742149 129.489481) + (xy 118.705623 129.305849) (xy 118.633972 129.132869) (xy 118.63397 129.132867) (xy 118.633968 129.132861) + (xy 118.56156 129.024497) (xy 118.529952 128.977192) (xy 118.397558 128.844798) (xy 118.353209 128.815165) + (xy 118.241888 128.740781) (xy 118.241879 128.740777) (xy 118.068899 128.669126) (xy 117.885268 128.6326) + (xy 117.885266 128.6326) (xy 117.698034 128.6326) (xy 117.698031 128.6326) (xy 117.5144 128.669126) + (xy 117.34142 128.740777) (xy 117.341411 128.740781) (xy 117.185742 128.844798) (xy 117.185738 128.844801) + (xy 117.053351 128.977188) (xy 117.053348 128.977192) (xy 116.949331 129.132861) (xy 116.949327 129.13287) + (xy 116.877676 129.30585) (xy 116.84115 129.489481) (xy 116.20215 129.489481) (xy 116.20215 128.76828) + (xy 116.202149 128.768278) (xy 116.202149 128.768272) (xy 116.193417 128.724379) (xy 116.193415 128.724375) + (xy 116.160155 128.674598) (xy 116.160154 128.674596) (xy 116.151968 128.669126) (xy 116.110374 128.641334) + (xy 116.11037 128.641332) (xy 116.066477 128.6326) (xy 116.06647 128.6326) (xy 114.43683 128.6326) + (xy 114.436822 128.6326) (xy 114.392929 128.641332) (xy 114.392925 128.641334) (xy 114.343148 128.674594) + (xy 114.343144 128.674598) (xy 114.309884 128.724375) (xy 114.309882 128.724379) (xy 114.30115 128.768272) + (xy 80.850819 128.768272) (xy 80.847557 125.540691) (xy 167.0495 125.540691) (xy 167.0495 125.659309) + (xy 167.076574 125.760351) (xy 167.080202 125.77389) (xy 167.139507 125.876608) (xy 167.139509 125.87661) + (xy 167.139511 125.876613) (xy 167.223387 125.960489) (xy 167.223389 125.96049) (xy 167.223391 125.960492) + (xy 167.32611 126.019797) (xy 167.326111 126.019797) (xy 167.326114 126.019799) (xy 167.440691 126.0505) + (xy 167.440693 126.0505) (xy 167.559307 126.0505) (xy 167.559309 126.0505) (xy 167.673886 126.019799) + (xy 167.673888 126.019797) (xy 167.67389 126.019797) (xy 167.776608 125.960492) (xy 167.776608 125.960491) + (xy 167.776613 125.960489) (xy 167.860489 125.876613) (xy 167.919799 125.773886) (xy 167.9505 125.659309) + (xy 167.9505 125.540691) (xy 167.919799 125.426114) (xy 167.919797 125.426111) (xy 167.919797 125.426109) + (xy 167.860492 125.323391) (xy 167.86049 125.323389) (xy 167.860489 125.323387) (xy 167.776613 125.239511) + (xy 167.77661 125.239509) (xy 167.776608 125.239507) (xy 167.673889 125.180202) (xy 167.67389 125.180202) + (xy 167.660351 125.176574) (xy 167.559309 125.1495) (xy 167.440691 125.1495) (xy 167.370567 125.168289) + (xy 167.326109 125.180202) (xy 167.223391 125.239507) (xy 167.139507 125.323391) (xy 167.080202 125.426109) + (xy 167.080201 125.426114) (xy 167.0495 125.540691) (xy 80.847557 125.540691) (xy 80.836933 115.030291) + (xy 100.61975 115.030291) (xy 100.61975 115.148909) (xy 100.634137 115.2026) (xy 100.650452 115.26349) + (xy 100.709757 115.366208) (xy 100.709759 115.36621) (xy 100.709761 115.366213) (xy 100.793637 115.450089) + (xy 100.793639 115.45009) (xy 100.793641 115.450092) (xy 100.89636 115.509397) (xy 100.896361 115.509397) + (xy 100.896364 115.509399) (xy 101.010941 115.5401) (xy 101.010943 115.5401) (xy 101.129557 115.5401) + (xy 101.129559 115.5401) (xy 101.244136 115.509399) (xy 101.244138 115.509397) (xy 101.24414 115.509397) + (xy 101.346858 115.450092) (xy 101.346858 115.450091) (xy 101.346863 115.450089) (xy 101.430739 115.366213) + (xy 101.490049 115.263486) (xy 101.52075 115.148909) (xy 101.52075 115.030291) (xy 101.490049 114.915714) + (xy 101.490047 114.915711) (xy 101.490047 114.915709) (xy 101.430742 114.812991) (xy 101.43074 114.812989) + (xy 101.430739 114.812987) (xy 101.346863 114.729111) (xy 101.34686 114.729109) (xy 101.346858 114.729107) + (xy 101.244139 114.669802) (xy 101.24414 114.669802) (xy 101.230601 114.666174) (xy 101.129559 114.6391) + (xy 101.010941 114.6391) (xy 100.940817 114.657889) (xy 100.896359 114.669802) (xy 100.793641 114.729107) + (xy 100.709757 114.812991) (xy 100.650452 114.915709) (xy 100.633287 114.979769) (xy 100.61975 115.030291) + (xy 80.836933 115.030291) (xy 80.83592 114.027891) (xy 169.28675 114.027891) (xy 169.28675 114.146509) + (xy 169.291615 114.164665) (xy 169.317452 114.26109) (xy 169.376757 114.363808) (xy 169.376759 114.36381) + (xy 169.376761 114.363813) (xy 169.460637 114.447689) (xy 169.460639 114.44769) (xy 169.460641 114.447692) + (xy 169.56336 114.506997) (xy 169.563361 114.506997) (xy 169.563364 114.506999) (xy 169.677941 114.5377) + (xy 169.677943 114.5377) (xy 169.792481 114.5377) (xy 169.850672 114.556607) (xy 169.862485 114.566696) + (xy 176.760785 121.464995) (xy 176.760786 121.464997) (xy 176.831253 121.535464) (xy 176.831254 121.535464) + (xy 176.831255 121.535465) (xy 176.923321 121.5736) (xy 176.923322 121.5736) (xy 177.022978 121.5736) + (xy 208.942151 121.5736) (xy 209.000342 121.592507) (xy 209.036306 121.642007) (xy 209.041151 121.6726) + (xy 209.041151 121.954623) (xy 209.056002 122.048399) (xy 209.056004 122.048404) (xy 209.1136 122.161442) + (xy 209.203308 122.25115) (xy 209.316346 122.308746) (xy 209.410131 122.3236) (xy 210.973168 122.323599) + (xy 210.973171 122.323599) (xy 210.973172 122.323598) (xy 211.020061 122.316172) (xy 211.066949 122.308747) + (xy 211.066949 122.308746) (xy 211.066954 122.308746) (xy 211.179992 122.25115) (xy 211.2697 122.161442) + (xy 211.327296 122.048404) (xy 211.34215 121.954619) (xy 211.342149 120.691582) (xy 211.342149 120.691581) + (xy 211.342149 120.691578) (xy 211.342148 120.691576) (xy 211.327297 120.5978) (xy 211.327296 120.597798) + (xy 211.327296 120.597796) (xy 211.2697 120.484758) (xy 211.179992 120.39505) (xy 211.066954 120.337454) + (xy 211.066955 120.337454) (xy 210.973172 120.3226) (xy 210.720416 120.3226) (xy 210.662225 120.303693) + (xy 210.626261 120.254193) (xy 210.626261 120.193007) (xy 210.662225 120.143507) (xy 210.689824 120.129445) + (xy 210.859863 120.074196) (xy 211.049202 119.977724) (xy 211.221114 119.852822) (xy 211.371372 119.702564) + (xy 211.496274 119.530652) (xy 211.592745 119.341315) (xy 211.658408 119.139222) (xy 211.668881 119.0731) + (xy 210.624662 119.0731) (xy 210.657575 119.016093) (xy 210.69165 118.888926) (xy 210.69165 118.757274) + (xy 210.657575 118.630107) (xy 210.624662 118.5731) (xy 211.668881 118.5731) (xy 211.668881 118.573099) + (xy 211.658408 118.506977) (xy 211.592745 118.304884) (xy 211.496274 118.115547) (xy 211.371372 117.943635) + (xy 211.221114 117.793377) (xy 211.049202 117.668475) (xy 210.859865 117.572004) (xy 210.657771 117.50634) + (xy 210.4479 117.4731) (xy 210.441651 117.4731) (xy 210.44165 117.473101) (xy 210.44165 118.390088) + (xy 210.384643 118.357175) (xy 210.257476 118.3231) (xy 210.125824 118.3231) (xy 209.998657 118.357175) + (xy 209.94165 118.390088) (xy 209.94165 117.473101) (xy 209.941649 117.4731) (xy 209.9354 117.4731) + (xy 209.725528 117.50634) (xy 209.523434 117.572004) (xy 209.334097 117.668475) (xy 209.162185 117.793377) + (xy 209.011927 117.943635) (xy 208.887025 118.115547) (xy 208.790554 118.304884) (xy 208.724891 118.506977) + (xy 208.714418 118.573099) (xy 208.714419 118.5731) (xy 209.758638 118.5731) (xy 209.725725 118.630107) + (xy 209.69165 118.757274) (xy 209.69165 118.888926) (xy 209.725725 119.016093) (xy 209.758638 119.0731) + (xy 208.714419 119.0731) (xy 208.724891 119.139222) (xy 208.790554 119.341315) (xy 208.887025 119.530652) + (xy 209.011927 119.702564) (xy 209.162185 119.852822) (xy 209.334097 119.977724) (xy 209.523436 120.074196) + (xy 209.693478 120.129445) (xy 209.742978 120.165409) (xy 209.761886 120.223599) (xy 209.742979 120.28179) + (xy 209.693479 120.317754) (xy 209.662886 120.3226) (xy 209.410128 120.3226) (xy 209.410126 120.322601) + (xy 209.31635 120.337452) (xy 209.316345 120.337454) (xy 209.203309 120.395049) (xy 209.113599 120.484759) + (xy 209.056004 120.597795) (xy 209.04115 120.691578) (xy 209.04115 120.9736) (xy 209.022243 121.031791) + (xy 208.972743 121.067755) (xy 208.94215 121.0726) (xy 177.117918 121.0726) (xy 177.059727 121.053693) + (xy 177.047914 121.043604) (xy 170.216746 114.212435) (xy 170.188969 114.157918) (xy 170.18775 114.142431) + (xy 170.18775 114.027892) (xy 170.164131 113.939745) (xy 170.157049 113.913314) (xy 170.157047 113.913311) + (xy 170.157047 113.913309) (xy 170.097742 113.810591) (xy 170.09774 113.810589) (xy 170.097739 113.810587) + (xy 170.013863 113.726711) (xy 170.01386 113.726709) (xy 170.013858 113.726707) (xy 169.911139 113.667402) + (xy 169.91114 113.667402) (xy 169.897601 113.663774) (xy 169.796559 113.6367) (xy 169.677941 113.6367) + (xy 169.607817 113.655489) (xy 169.563359 113.667402) (xy 169.460641 113.726707) (xy 169.376757 113.810591) + (xy 169.317452 113.913309) (xy 169.317451 113.913314) (xy 169.28675 114.027891) (xy 80.83592 114.027891) + (xy 80.833388 111.523491) (xy 106.38145 111.523491) (xy 106.38145 111.642109) (xy 106.400442 111.712986) + (xy 106.412152 111.75669) (xy 106.471457 111.859408) (xy 106.471459 111.85941) (xy 106.471461 111.859413) + (xy 106.555337 111.943289) (xy 106.555339 111.94329) (xy 106.555341 111.943292) (xy 106.65806 112.002597) + (xy 106.658061 112.002597) (xy 106.658064 112.002599) (xy 106.772641 112.0333) (xy 106.772643 112.0333) + (xy 106.891257 112.0333) (xy 106.891259 112.0333) (xy 107.005836 112.002599) (xy 107.005838 112.002597) + (xy 107.00584 112.002597) (xy 107.108558 111.943292) (xy 107.108558 111.943291) (xy 107.108563 111.943289) + (xy 107.192439 111.859413) (xy 107.192442 111.859408) (xy 107.251747 111.75669) (xy 107.251747 111.756688) + (xy 107.251749 111.756686) (xy 107.28245 111.642109) (xy 107.28245 111.523491) (xy 107.270741 111.479791) + (xy 110.32675 111.479791) (xy 110.32675 111.598409) (xy 110.348261 111.678689) (xy 110.357452 111.71299) + (xy 110.416757 111.815708) (xy 110.416759 111.81571) (xy 110.416761 111.815713) (xy 110.500637 111.899589) + (xy 110.500639 111.89959) (xy 110.500641 111.899592) (xy 110.60336 111.958897) (xy 110.603361 111.958897) + (xy 110.603364 111.958899) (xy 110.717941 111.9896) (xy 110.717943 111.9896) (xy 110.836557 111.9896) + (xy 110.836559 111.9896) (xy 110.951136 111.958899) (xy 110.951138 111.958897) (xy 110.95114 111.958897) + (xy 111.053858 111.899592) (xy 111.053858 111.899591) (xy 111.053863 111.899589) (xy 111.137739 111.815713) + (xy 111.161759 111.774109) (xy 111.197047 111.71299) (xy 111.197047 111.712988) (xy 111.197049 111.712986) + (xy 111.22775 111.598409) (xy 111.22775 111.479791) (xy 111.197049 111.365214) (xy 111.197047 111.365211) + (xy 111.197047 111.365209) (xy 111.137742 111.262491) (xy 111.13774 111.262489) (xy 111.137739 111.262487) + (xy 111.053863 111.178611) (xy 111.05386 111.178609) (xy 111.053858 111.178607) (xy 110.951139 111.119302) + (xy 110.95114 111.119302) (xy 110.937601 111.115674) (xy 110.836559 111.0886) (xy 110.717941 111.0886) + (xy 110.647817 111.107389) (xy 110.603359 111.119302) (xy 110.500641 111.178607) (xy 110.416757 111.262491) + (xy 110.357452 111.365209) (xy 110.340287 111.429269) (xy 110.32675 111.479791) (xy 107.270741 111.479791) + (xy 107.251749 111.408914) (xy 107.251747 111.408911) (xy 107.251747 111.408909) (xy 107.192442 111.306191) + (xy 107.19244 111.306189) (xy 107.192439 111.306187) (xy 107.108563 111.222311) (xy 107.10856 111.222309) + (xy 107.108558 111.222307) (xy 107.005839 111.163002) (xy 107.00584 111.163002) (xy 106.992301 111.159374) + (xy 106.891259 111.1323) (xy 106.772641 111.1323) (xy 106.702517 111.151089) (xy 106.658059 111.163002) + (xy 106.555341 111.222307) (xy 106.471457 111.306191) (xy 106.412152 111.408909) (xy 106.412151 111.408914) + (xy 106.38145 111.523491) (xy 80.833388 111.523491) (xy 80.830859 109.021091) (xy 91.64615 109.021091) + (xy 91.64615 109.139709) (xy 91.662225 109.1997) (xy 91.676852 109.25429) (xy 91.736157 109.357008) + (xy 91.736159 109.35701) (xy 91.736161 109.357013) (xy 91.820037 109.440889) (xy 91.820039 109.44089) + (xy 91.820041 109.440892) (xy 91.92276 109.500197) (xy 91.922761 109.500197) (xy 91.922764 109.500199) + (xy 92.037341 109.5309) (xy 92.037343 109.5309) (xy 92.155957 109.5309) (xy 92.155959 109.5309) + (xy 92.270536 109.500199) (xy 92.305249 109.480156) (xy 92.365097 109.467435) (xy 92.420993 109.492321) + (xy 92.451586 109.545308) (xy 92.45375 109.565893) (xy 92.45375 109.673594) (xy 92.488354 109.847563) + (xy 92.488356 109.847569) (xy 92.556237 110.011446) (xy 92.631778 110.124502) (xy 92.654786 110.158936) + (xy 92.780214 110.284364) (xy 92.927703 110.382912) (xy 93.091584 110.450795) (xy 93.265558 110.4854) + (xy 93.265559 110.4854) (xy 93.442941 110.4854) (xy 93.442942 110.4854) (xy 93.616916 110.450795) + (xy 93.772048 110.386535) (xy 93.809934 110.379) (xy 113.105482 110.379) (xy 113.163673 110.397907) + (xy 113.199637 110.447407) (xy 113.199637 110.508593) (xy 113.175487 110.548001) (xy 111.588891 112.134597) + (xy 111.094584 112.628904) (xy 111.040067 112.656681) (xy 111.02458 112.6579) (xy 110.910041 112.6579) + (xy 110.839917 112.676689) (xy 110.795459 112.688602) (xy 110.692741 112.747907) (xy 110.608857 112.831791) + (xy 110.549552 112.934509) (xy 110.535082 112.988511) (xy 110.51885 113.049091) (xy 110.51885 113.167709) + (xy 110.542821 113.257168) (xy 110.549552 113.28229) (xy 110.608857 113.385008) (xy 110.608859 113.38501) + (xy 110.608861 113.385013) (xy 110.692737 113.468889) (xy 110.692739 113.46889) (xy 110.692741 113.468892) + (xy 110.79546 113.528197) (xy 110.795461 113.528197) (xy 110.795464 113.528199) (xy 110.910041 113.5589) + (xy 110.910043 113.5589) (xy 111.028657 113.5589) (xy 111.028659 113.5589) (xy 111.143236 113.528199) + (xy 111.143238 113.528197) (xy 111.14324 113.528197) (xy 111.245958 113.468892) (xy 111.245958 113.468891) + (xy 111.245963 113.468889) (xy 111.329839 113.385013) (xy 111.384874 113.289691) (xy 126.18365 113.289691) + (xy 126.18365 113.408309) (xy 126.199883 113.468892) (xy 126.214352 113.52289) (xy 126.273657 113.625608) + (xy 126.273659 113.62561) (xy 126.273661 113.625613) (xy 126.357537 113.709489) (xy 126.357539 113.70949) + (xy 126.357541 113.709492) (xy 126.46026 113.768797) (xy 126.460261 113.768797) (xy 126.460264 113.768799) + (xy 126.574841 113.7995) (xy 126.574843 113.7995) (xy 126.693457 113.7995) (xy 126.693459 113.7995) + (xy 126.808036 113.768799) (xy 126.808038 113.768797) (xy 126.80804 113.768797) (xy 126.910758 113.709492) + (xy 126.910758 113.709491) (xy 126.910763 113.709489) (xy 126.994639 113.625613) (xy 127.032373 113.560256) + (xy 127.053947 113.52289) (xy 127.053947 113.522888) (xy 127.053949 113.522886) (xy 127.083332 113.413228) + (xy 170.966351 113.413228) (xy 170.966351 113.541371) (xy 170.991349 113.667043) (xy 170.991349 113.667045) + (xy 171.040383 113.785424) (xy 171.040384 113.785426) (xy 171.040385 113.785427) (xy 171.111573 113.891969) + (xy 176.21798 118.998376) (xy 176.324523 119.069565) (xy 176.442906 119.118601) (xy 176.568581 119.1436) + (xy 176.568582 119.1436) (xy 196.915718 119.1436) (xy 196.915719 119.1436) (xy 197.041394 119.118601) + (xy 197.159777 119.069565) (xy 197.266319 118.998377) (xy 202.656927 113.607769) (xy 202.728115 113.501227) + (xy 202.777151 113.382844) (xy 202.802149 113.257169) (xy 202.802149 113.129031) (xy 202.777151 113.003356) + (xy 202.734685 112.900835) (xy 202.728116 112.884975) (xy 202.656929 112.778434) (xy 202.656927 112.778431) + (xy 202.566319 112.687823) (xy 202.521535 112.6579) (xy 202.459774 112.616633) (xy 202.341394 112.567599) + (xy 202.215721 112.542601) (xy 202.215719 112.542601) (xy 202.087581 112.542601) (xy 202.087578 112.542601) + (xy 201.961906 112.567599) (xy 201.961904 112.567599) (xy 201.843525 112.616633) (xy 201.736984 112.68782) + (xy 196.6112 117.813604) (xy 196.556683 117.841381) (xy 196.541196 117.8426) (xy 176.943104 117.8426) + (xy 176.884913 117.823693) (xy 176.8731 117.813604) (xy 175.791387 116.731891) (xy 184.65215 116.731891) + (xy 184.65215 116.850509) (xy 184.679224 116.951551) (xy 184.682852 116.96509) (xy 184.742157 117.067808) + (xy 184.742159 117.06781) (xy 184.742161 117.067813) (xy 184.826037 117.151689) (xy 184.826039 117.15169) + (xy 184.826041 117.151692) (xy 184.92876 117.210997) (xy 184.928761 117.210997) (xy 184.928764 117.210999) + (xy 185.043341 117.2417) (xy 185.043343 117.2417) (xy 185.161957 117.2417) (xy 185.161959 117.2417) + (xy 185.276536 117.210999) (xy 185.276538 117.210997) (xy 185.27654 117.210997) (xy 185.379258 117.151692) + (xy 185.379258 117.151691) (xy 185.379263 117.151689) (xy 185.463139 117.067813) (xy 185.522449 116.965086) + (xy 185.55315 116.850509) (xy 185.55315 116.731891) (xy 185.522449 116.617314) (xy 185.522447 116.617311) + (xy 185.522447 116.617309) (xy 185.463142 116.514591) (xy 185.46314 116.514589) (xy 185.463139 116.514587) + (xy 185.379263 116.430711) (xy 185.37926 116.430709) (xy 185.379258 116.430707) (xy 185.276539 116.371402) + (xy 185.27654 116.371402) (xy 185.263001 116.367774) (xy 185.161959 116.3407) (xy 185.043341 116.3407) + (xy 184.973217 116.359489) (xy 184.928759 116.371402) (xy 184.826041 116.430707) (xy 184.742157 116.514591) + (xy 184.682852 116.617309) (xy 184.682851 116.617314) (xy 184.65215 116.731891) (xy 175.791387 116.731891) + (xy 175.090602 116.031106) (xy 175.027087 115.967591) (xy 186.64635 115.967591) (xy 186.64635 116.086209) + (xy 186.673424 116.187251) (xy 186.677052 116.20079) (xy 186.736357 116.303508) (xy 186.736359 116.30351) + (xy 186.736361 116.303513) (xy 186.820237 116.387389) (xy 186.820239 116.38739) (xy 186.820241 116.387392) + (xy 186.92296 116.446697) (xy 186.922961 116.446697) (xy 186.922964 116.446699) (xy 187.037541 116.4774) + (xy 187.037543 116.4774) (xy 187.156157 116.4774) (xy 187.156159 116.4774) (xy 187.270736 116.446699) + (xy 187.270738 116.446697) (xy 187.27074 116.446697) (xy 187.373458 116.387392) (xy 187.373458 116.387391) + (xy 187.373463 116.387389) (xy 187.457339 116.303513) (xy 187.516649 116.200786) (xy 187.54735 116.086209) + (xy 187.54735 115.967591) (xy 187.516649 115.853014) (xy 187.516647 115.853011) (xy 187.516647 115.853009) + (xy 187.457342 115.750291) (xy 187.45734 115.750289) (xy 187.457339 115.750287) (xy 187.373463 115.666411) + (xy 187.37346 115.666409) (xy 187.373458 115.666407) (xy 187.270739 115.607102) (xy 187.27074 115.607102) + (xy 187.257201 115.603474) (xy 187.156159 115.5764) (xy 187.037541 115.5764) (xy 186.967417 115.595189) + (xy 186.922959 115.607102) (xy 186.820241 115.666407) (xy 186.736357 115.750291) (xy 186.677052 115.853009) + (xy 186.677051 115.853014) (xy 186.64635 115.967591) (xy 175.027087 115.967591) (xy 174.425704 115.366208) + (xy 173.635287 114.575791) (xy 184.80125 114.575791) (xy 184.80125 114.694409) (xy 184.828324 114.795451) + (xy 184.831952 114.80899) (xy 184.891257 114.911708) (xy 184.891259 114.91171) (xy 184.891261 114.911713) + (xy 184.975137 114.995589) (xy 184.975139 114.99559) (xy 184.975141 114.995592) (xy 185.07786 115.054897) + (xy 185.077861 115.054897) (xy 185.077864 115.054899) (xy 185.192441 115.0856) (xy 185.192443 115.0856) + (xy 185.311057 115.0856) (xy 185.311059 115.0856) (xy 185.425636 115.054899) (xy 185.425638 115.054897) + (xy 185.42564 115.054897) (xy 185.528358 114.995592) (xy 185.528358 114.995591) (xy 185.528363 114.995589) + (xy 185.612239 114.911713) (xy 185.67015 114.811409) (xy 185.671547 114.80899) (xy 185.671547 114.808988) + (xy 185.671549 114.808986) (xy 185.70225 114.694409) (xy 185.70225 114.692791) (xy 192.52565 114.692791) + (xy 192.52565 114.811409) (xy 192.526073 114.812987) (xy 192.556352 114.92599) (xy 192.615657 115.028708) + (xy 192.615659 115.02871) (xy 192.615661 115.028713) (xy 192.699537 115.112589) (xy 192.699539 115.11259) + (xy 192.699541 115.112592) (xy 192.80226 115.171897) (xy 192.802261 115.171897) (xy 192.802264 115.171899) + (xy 192.916841 115.2026) (xy 192.916843 115.2026) (xy 193.035457 115.2026) (xy 193.035459 115.2026) + (xy 193.150036 115.171899) (xy 193.150038 115.171897) (xy 193.15004 115.171897) (xy 193.252758 115.112592) + (xy 193.252758 115.112591) (xy 193.252763 115.112589) (xy 193.336639 115.028713) (xy 193.355762 114.995592) + (xy 193.395947 114.92599) (xy 193.395947 114.925988) (xy 193.395949 114.925986) (xy 193.42665 114.811409) + (xy 193.42665 114.692791) (xy 193.395949 114.578214) (xy 193.395947 114.578211) (xy 193.395947 114.578209) + (xy 193.336642 114.475491) (xy 193.33664 114.475489) (xy 193.336639 114.475487) (xy 193.252763 114.391611) + (xy 193.25276 114.391609) (xy 193.252758 114.391607) (xy 193.150039 114.332302) (xy 193.15004 114.332302) + (xy 193.136501 114.328674) (xy 193.035459 114.3016) (xy 192.916841 114.3016) (xy 192.846717 114.320389) + (xy 192.802259 114.332302) (xy 192.699541 114.391607) (xy 192.615657 114.475491) (xy 192.556352 114.578209) + (xy 192.556351 114.578214) (xy 192.52565 114.692791) (xy 185.70225 114.692791) (xy 185.70225 114.575791) + (xy 185.671549 114.461214) (xy 185.671547 114.461211) (xy 185.671547 114.461209) (xy 185.612242 114.358491) + (xy 185.61224 114.358489) (xy 185.612239 114.358487) (xy 185.528363 114.274611) (xy 185.52836 114.274609) + (xy 185.528358 114.274607) (xy 185.425639 114.215302) (xy 185.42564 114.215302) (xy 185.412101 114.211674) + (xy 185.311059 114.1846) (xy 185.192441 114.1846) (xy 185.122317 114.203389) (xy 185.077859 114.215302) + (xy 184.975141 114.274607) (xy 184.891257 114.358491) (xy 184.831952 114.461209) (xy 184.828125 114.475491) + (xy 184.80125 114.575791) (xy 173.635287 114.575791) (xy 172.031519 112.972023) (xy 171.975374 112.934509) + (xy 171.924974 112.900833) (xy 171.806594 112.851799) (xy 171.680921 112.826801) (xy 171.680919 112.826801) + (xy 171.552781 112.826801) (xy 171.552778 112.826801) (xy 171.427106 112.851799) (xy 171.427104 112.851799) + (xy 171.308725 112.900833) (xy 171.202184 112.97202) (xy 171.11157 113.062634) (xy 171.040383 113.169175) + (xy 170.991349 113.287554) (xy 170.991349 113.287556) (xy 170.966351 113.413228) (xy 127.083332 113.413228) + (xy 127.08465 113.408309) (xy 127.08465 113.289691) (xy 127.053949 113.175114) (xy 127.053947 113.175111) + (xy 127.053947 113.175109) (xy 126.994642 113.072391) (xy 126.99464 113.072389) (xy 126.994639 113.072387) + (xy 126.910763 112.988511) (xy 126.91076 112.988509) (xy 126.910758 112.988507) (xy 126.808039 112.929202) + (xy 126.80804 112.929202) (xy 126.794501 112.925574) (xy 126.693459 112.8985) (xy 126.574841 112.8985) + (xy 126.504717 112.917289) (xy 126.460259 112.929202) (xy 126.357541 112.988507) (xy 126.273657 113.072391) + (xy 126.214352 113.175109) (xy 126.214351 113.175114) (xy 126.18365 113.289691) (xy 111.384874 113.289691) + (xy 111.389149 113.282286) (xy 111.41985 113.167709) (xy 111.41985 113.053168) (xy 111.438757 112.994977) + (xy 111.448846 112.983164) (xy 112.77652 111.655491) (xy 126.16455 111.655491) (xy 126.16455 111.774109) + (xy 126.175698 111.815713) (xy 126.195252 111.88869) (xy 126.254557 111.991408) (xy 126.254559 111.99141) + (xy 126.254561 111.991413) (xy 126.338437 112.075289) (xy 126.338439 112.07529) (xy 126.338441 112.075292) + (xy 126.44116 112.134597) (xy 126.441161 112.134597) (xy 126.441164 112.134599) (xy 126.555741 112.1653) + (xy 126.555743 112.1653) (xy 126.674357 112.1653) (xy 126.674359 112.1653) (xy 126.788936 112.134599) + (xy 126.788938 112.134597) (xy 126.78894 112.134597) (xy 126.891658 112.075292) (xy 126.891658 112.075291) + (xy 126.891663 112.075289) (xy 126.975539 111.991413) (xy 127.003324 111.943289) (xy 127.034847 111.88869) + (xy 127.034847 111.888688) (xy 127.034849 111.888686) (xy 127.06555 111.774109) (xy 127.06555 111.655491) + (xy 127.034849 111.540914) (xy 127.034847 111.540911) (xy 127.034847 111.540909) (xy 126.975542 111.438191) + (xy 126.97554 111.438189) (xy 126.975539 111.438187) (xy 126.891663 111.354311) (xy 126.89166 111.354309) + (xy 126.891658 111.354307) (xy 126.788939 111.295002) (xy 126.78894 111.295002) (xy 126.775401 111.291374) + (xy 126.674359 111.2643) (xy 126.555741 111.2643) (xy 126.485617 111.283089) (xy 126.441159 111.295002) + (xy 126.338441 111.354307) (xy 126.254557 111.438191) (xy 126.195252 111.540909) (xy 126.195251 111.540914) + (xy 126.16455 111.655491) (xy 112.77652 111.655491) (xy 112.853013 111.578998) (xy 113.434515 110.997496) + (xy 113.489032 110.969719) (xy 113.504519 110.9685) (xy 131.651884 110.9685) (xy 131.710075 110.987407) + (xy 131.746039 111.036907) (xy 131.746039 111.098093) (xy 131.73762 111.117) (xy 131.721852 111.144309) + (xy 131.712662 111.178607) (xy 131.69115 111.258891) (xy 131.69115 111.377509) (xy 131.699564 111.408909) + (xy 131.721852 111.49209) (xy 131.781157 111.594808) (xy 131.781159 111.59481) (xy 131.781161 111.594813) + (xy 131.865037 111.678689) (xy 131.865039 111.67869) (xy 131.865041 111.678692) (xy 131.96776 111.737997) + (xy 131.967761 111.737997) (xy 131.967764 111.737999) (xy 132.082341 111.7687) (xy 132.082343 111.7687) + (xy 132.200957 111.7687) (xy 132.200959 111.7687) (xy 132.315536 111.737999) (xy 132.315538 111.737997) + (xy 132.31554 111.737997) (xy 132.418258 111.678692) (xy 132.418258 111.678691) (xy 132.418263 111.678689) + (xy 132.502139 111.594813) (xy 132.543317 111.523491) (xy 132.561447 111.49209) (xy 132.561447 111.492088) + (xy 132.561449 111.492086) (xy 132.59215 111.377509) (xy 132.59215 111.258891) (xy 132.561449 111.144314) + (xy 132.561447 111.144311) (xy 132.561447 111.144309) (xy 132.502142 111.041591) (xy 132.50214 111.041589) + (xy 132.502139 111.041587) (xy 132.418263 110.957711) (xy 132.41826 110.957709) (xy 132.418258 110.957707) + (xy 132.315539 110.898402) (xy 132.315535 110.8984) (xy 132.251719 110.8813) (xy 132.200405 110.847976) + (xy 132.178479 110.790854) (xy 132.194315 110.731754) (xy 132.207334 110.715675) (xy 132.438018 110.484991) + (xy 196.44045 110.484991) (xy 196.44045 110.603609) (xy 196.45775 110.668172) (xy 196.471152 110.71819) + (xy 196.530457 110.820908) (xy 196.530459 110.82091) (xy 196.530461 110.820913) (xy 196.614337 110.904789) + (xy 196.614339 110.90479) (xy 196.614341 110.904792) (xy 196.71706 110.964097) (xy 196.717061 110.964097) + (xy 196.717064 110.964099) (xy 196.831641 110.9948) (xy 196.831643 110.9948) (xy 196.950257 110.9948) + (xy 196.950259 110.9948) (xy 197.064836 110.964099) (xy 197.064838 110.964097) (xy 197.06484 110.964097) + (xy 197.167558 110.904792) (xy 197.167558 110.904791) (xy 197.167563 110.904789) (xy 197.251439 110.820913) + (xy 197.268794 110.790854) (xy 197.310747 110.71819) (xy 197.310747 110.718188) (xy 197.310749 110.718186) + (xy 197.34145 110.603609) (xy 197.34145 110.484991) (xy 197.310749 110.370414) (xy 197.310747 110.370411) + (xy 197.310747 110.370409) (xy 197.251442 110.267691) (xy 197.25144 110.267689) (xy 197.251439 110.267687) + (xy 197.167563 110.183811) (xy 197.16756 110.183809) (xy 197.167558 110.183807) (xy 197.064839 110.124502) + (xy 197.06484 110.124502) (xy 197.051301 110.120874) (xy 196.950259 110.0938) (xy 196.831641 110.0938) + (xy 196.761517 110.112589) (xy 196.717059 110.124502) (xy 196.614341 110.183807) (xy 196.530457 110.267691) + (xy 196.471152 110.370409) (xy 196.471151 110.370414) (xy 196.44045 110.484991) (xy 132.438018 110.484991) + (xy 133.484019 109.438991) (xy 181.02385 109.438991) (xy 181.02385 109.557609) (xy 181.050924 109.658651) + (xy 181.054552 109.67219) (xy 181.113857 109.774908) (xy 181.113859 109.77491) (xy 181.113861 109.774913) + (xy 181.197737 109.858789) (xy 181.197739 109.85879) (xy 181.197741 109.858792) (xy 181.30046 109.918097) + (xy 181.300461 109.918097) (xy 181.300464 109.918099) (xy 181.415041 109.9488) (xy 181.415043 109.9488) + (xy 181.533657 109.9488) (xy 181.533659 109.9488) (xy 181.648236 109.918099) (xy 181.648238 109.918097) + (xy 181.64824 109.918097) (xy 181.750958 109.858792) (xy 181.750958 109.858791) (xy 181.750963 109.858789) + (xy 181.834839 109.774913) (xy 181.834842 109.774908) (xy 181.894147 109.67219) (xy 181.894147 109.672188) + (xy 181.894149 109.672186) (xy 181.92485 109.557609) (xy 181.92485 109.438991) (xy 181.894149 109.324414) + (xy 181.894147 109.324411) (xy 181.894147 109.324409) (xy 181.834842 109.221691) (xy 181.83484 109.221689) + (xy 181.834839 109.221687) (xy 181.750963 109.137811) (xy 181.75096 109.137809) (xy 181.750958 109.137807) + (xy 181.648239 109.078502) (xy 181.64824 109.078502) (xy 181.634701 109.074874) (xy 181.533659 109.0478) + (xy 181.415041 109.0478) (xy 181.344917 109.066589) (xy 181.300459 109.078502) (xy 181.197741 109.137807) + (xy 181.113857 109.221691) (xy 181.054552 109.324409) (xy 181.054551 109.324414) (xy 181.02385 109.438991) + (xy 133.484019 109.438991) (xy 134.610515 108.312496) (xy 134.665032 108.284719) (xy 134.680519 108.2835) + (xy 163.988841 108.2835) (xy 164.047032 108.302407) (xy 164.082996 108.351907) (xy 164.082996 108.413093) + (xy 164.058846 108.452501) (xy 164.038761 108.472587) (xy 164.038758 108.47259) (xy 164.038757 108.472591) + (xy 163.979452 108.575309) (xy 163.964825 108.6299) (xy 163.94875 108.689891) (xy 163.94875 108.808509) + (xy 163.975009 108.906509) (xy 163.979452 108.92309) (xy 164.038757 109.025808) (xy 164.038759 109.02581) + (xy 164.038761 109.025813) (xy 164.122637 109.109689) (xy 164.122639 109.10969) (xy 164.122641 109.109692) + (xy 164.22536 109.168997) (xy 164.225361 109.168997) (xy 164.225364 109.168999) (xy 164.339941 109.1997) + (xy 164.339943 109.1997) (xy 164.458557 109.1997) (xy 164.458559 109.1997) (xy 164.573136 109.168999) + (xy 164.573138 109.168997) (xy 164.57314 109.168997) (xy 164.675858 109.109692) (xy 164.675858 109.109691) + (xy 164.675863 109.109689) (xy 164.759739 109.025813) (xy 164.819049 108.923086) (xy 164.84975 108.808509) + (xy 164.84975 108.689891) (xy 164.819049 108.575314) (xy 164.819047 108.575311) (xy 164.819047 108.575309) + (xy 164.759742 108.472591) (xy 164.75974 108.472589) (xy 164.759739 108.472587) (xy 164.739653 108.452501) + (xy 164.711878 108.397987) (xy 164.721449 108.337555) (xy 164.764714 108.29429) (xy 164.809659 108.2835) + (xy 173.519341 108.2835) (xy 173.577532 108.302407) (xy 173.589338 108.31249) (xy 173.670337 108.393489) + (xy 173.670339 108.39349) (xy 173.670341 108.393492) (xy 173.77306 108.452797) (xy 173.773061 108.452797) + (xy 173.773064 108.452799) (xy 173.887641 108.4835) (xy 173.887643 108.4835) (xy 174.006257 108.4835) + (xy 174.006259 108.4835) (xy 174.120836 108.452799) (xy 174.120838 108.452797) (xy 174.12084 108.452797) + (xy 174.223558 108.393492) (xy 174.223558 108.393491) (xy 174.223563 108.393489) (xy 174.307439 108.309613) + (xy 174.307442 108.309608) (xy 174.366747 108.20689) (xy 174.366747 108.206888) (xy 174.366749 108.206886) + (xy 174.39745 108.092309) (xy 174.39745 107.973691) (xy 174.366749 107.859114) (xy 174.347111 107.8251) + (xy 174.33439 107.765251) (xy 174.359277 107.709356) (xy 174.412265 107.678763) (xy 174.432848 107.6766) + (xy 176.941541 107.6766) (xy 176.999732 107.695507) (xy 177.011538 107.70559) (xy 177.092537 107.786589) + (xy 177.092539 107.78659) (xy 177.092541 107.786592) (xy 177.19526 107.845897) (xy 177.195261 107.845897) + (xy 177.195264 107.845899) (xy 177.309841 107.8766) (xy 177.309843 107.8766) (xy 177.428457 107.8766) + (xy 177.428459 107.8766) (xy 177.543036 107.845899) (xy 177.543038 107.845897) (xy 177.54304 107.845897) + (xy 177.645758 107.786592) (xy 177.645758 107.786591) (xy 177.645763 107.786589) (xy 177.729639 107.702713) + (xy 177.729642 107.702708) (xy 177.755344 107.658191) (xy 186.69115 107.658191) (xy 186.69115 107.776809) + (xy 186.70409 107.8251) (xy 186.721852 107.89139) (xy 186.781157 107.994108) (xy 186.781159 107.99411) + (xy 186.781161 107.994113) (xy 186.865037 108.077989) (xy 186.865039 108.07799) (xy 186.865041 108.077992) + (xy 186.96776 108.137297) (xy 186.967761 108.137297) (xy 186.967764 108.137299) (xy 187.082341 108.168) + (xy 187.082343 108.168) (xy 187.200957 108.168) (xy 187.200959 108.168) (xy 187.315536 108.137299) + (xy 187.315538 108.137297) (xy 187.31554 108.137297) (xy 187.418258 108.077992) (xy 187.418258 108.077991) + (xy 187.418263 108.077989) (xy 187.502139 107.994113) (xy 187.560741 107.892613) (xy 187.561447 107.89139) + (xy 187.561447 107.891388) (xy 187.561449 107.891386) (xy 187.59215 107.776809) (xy 187.59215 107.658191) + (xy 187.564953 107.556691) (xy 188.24115 107.556691) (xy 188.24115 107.675309) (xy 188.250273 107.709356) + (xy 188.271852 107.78989) (xy 188.331157 107.892608) (xy 188.331159 107.89261) (xy 188.331161 107.892613) + (xy 188.415037 107.976489) (xy 188.415039 107.97649) (xy 188.415041 107.976492) (xy 188.51776 108.035797) + (xy 188.517761 108.035797) (xy 188.517764 108.035799) (xy 188.632341 108.0665) (xy 188.632343 108.0665) + (xy 188.750957 108.0665) (xy 188.750959 108.0665) (xy 188.865536 108.035799) (xy 188.865538 108.035797) + (xy 188.86554 108.035797) (xy 188.968258 107.976492) (xy 188.968258 107.976491) (xy 188.968263 107.976489) + (xy 189.052139 107.892613) (xy 189.052845 107.89139) (xy 189.111447 107.78989) (xy 189.111447 107.789888) + (xy 189.111449 107.789886) (xy 189.14215 107.675309) (xy 189.14215 107.556691) (xy 189.111449 107.442114) + (xy 189.111447 107.442111) (xy 189.111447 107.442109) (xy 189.052142 107.339391) (xy 189.05214 107.339389) + (xy 189.052139 107.339387) (xy 188.968263 107.255511) (xy 188.96826 107.255509) (xy 188.968258 107.255507) + (xy 188.865539 107.196202) (xy 188.86554 107.196202) (xy 188.852001 107.192574) (xy 188.750959 107.1655) + (xy 188.632341 107.1655) (xy 188.594648 107.1756) (xy 188.517759 107.196202) (xy 188.415041 107.255507) + (xy 188.331157 107.339391) (xy 188.271852 107.442109) (xy 188.26025 107.485409) (xy 188.24115 107.556691) + (xy 187.564953 107.556691) (xy 187.561449 107.543614) (xy 187.561446 107.543609) (xy 187.502142 107.440891) + (xy 187.50214 107.440889) (xy 187.502139 107.440887) (xy 187.418263 107.357011) (xy 187.41826 107.357009) + (xy 187.418258 107.357007) (xy 187.315539 107.297702) (xy 187.31554 107.297702) (xy 187.302001 107.294074) + (xy 187.200959 107.267) (xy 187.082341 107.267) (xy 187.012217 107.285789) (xy 186.967759 107.297702) + (xy 186.865041 107.357007) (xy 186.781157 107.440891) (xy 186.721852 107.543609) (xy 186.71322 107.575824) + (xy 186.69115 107.658191) (xy 177.755344 107.658191) (xy 177.78767 107.602202) (xy 177.78767 107.602201) + (xy 177.787672 107.602198) (xy 177.787819 107.601942) (xy 177.788949 107.599986) (xy 177.81965 107.485409) + (xy 177.81965 107.366791) (xy 177.788949 107.252214) (xy 177.788947 107.252211) (xy 177.788947 107.252209) + (xy 177.729642 107.149491) (xy 177.72964 107.149489) (xy 177.729639 107.149487) (xy 177.645763 107.065611) + (xy 177.64576 107.065609) (xy 177.645758 107.065607) (xy 177.543039 107.006302) (xy 177.54304 107.006302) + (xy 177.529501 107.002674) (xy 177.428459 106.9756) (xy 177.309841 106.9756) (xy 177.239717 106.994389) + (xy 177.195259 107.006302) (xy 177.092541 107.065607) (xy 177.09254 107.065608) (xy 177.092537 107.06561) + (xy 177.092537 107.065611) (xy 177.011542 107.146605) (xy 176.957028 107.174381) (xy 176.941541 107.1756) + (xy 100.217459 107.1756) (xy 100.159268 107.156693) (xy 100.147461 107.146609) (xy 100.066463 107.065611) + (xy 100.06646 107.065609) (xy 100.066458 107.065607) (xy 99.963739 107.006302) (xy 99.96374 107.006302) + (xy 99.950201 107.002674) (xy 99.849159 106.9756) (xy 99.730541 106.9756) (xy 99.660417 106.994389) + (xy 99.615959 107.006302) (xy 99.513241 107.065607) (xy 99.429357 107.149491) (xy 99.370052 107.252209) + (xy 99.366089 107.267) (xy 99.33935 107.366791) (xy 99.33935 107.485409) (xy 99.354945 107.543609) + (xy 99.370052 107.59999) (xy 99.429357 107.702708) (xy 99.429359 107.70271) (xy 99.429361 107.702713) + (xy 99.513237 107.786589) (xy 99.513239 107.78659) (xy 99.513241 107.786592) (xy 99.61596 107.845897) + (xy 99.615961 107.845897) (xy 99.615964 107.845899) (xy 99.730541 107.8766) (xy 99.730543 107.8766) + (xy 99.849157 107.8766) (xy 99.849159 107.8766) (xy 99.963736 107.845899) (xy 99.963738 107.845897) + (xy 99.96374 107.845897) (xy 100.066458 107.786592) (xy 100.066458 107.786591) (xy 100.066463 107.786589) + (xy 100.147457 107.705594) (xy 100.201972 107.677819) (xy 100.217459 107.6766) (xy 134.298882 107.6766) + (xy 134.357073 107.695507) (xy 134.393037 107.745007) (xy 134.393037 107.806193) (xy 134.368887 107.845601) + (xy 133.056136 109.158353) (xy 131.775985 110.438504) (xy 131.721468 110.466281) (xy 131.705981 110.4675) + (xy 117.29482 110.4675) (xy 117.236629 110.448593) (xy 117.200665 110.399093) (xy 117.200665 110.337907) + (xy 117.236629 110.288407) (xy 117.256937 110.277035) (xy 117.257068 110.27698) (xy 117.258197 110.276513) + (xy 117.405685 110.177964) (xy 117.531114 110.052535) (xy 117.629663 109.905047) (xy 117.697544 109.741166) + (xy 117.73215 109.567191) (xy 117.73215 109.389809) (xy 117.697544 109.215834) (xy 117.64066 109.078502) + (xy 117.629664 109.051955) (xy 117.629664 109.051954) (xy 117.531114 108.904465) (xy 117.405684 108.779035) + (xy 117.258194 108.680485) (xy 117.094316 108.612606) (xy 116.920343 108.578) (xy 116.920341 108.578) + (xy 93.549341 108.578) (xy 93.371958 108.578) (xy 93.371955 108.578) (xy 93.28844 108.594613) (xy 93.197984 108.612606) + (xy 93.197982 108.612606) (xy 93.034105 108.680485) (xy 93.034104 108.680485) (xy 92.886615 108.779035) + (xy 92.886614 108.779037) (xy 92.886613 108.779037) (xy 92.688983 108.976665) (xy 92.634467 109.004442) + (xy 92.574034 108.99487) (xy 92.53077 108.951606) (xy 92.523355 108.93229) (xy 92.516449 108.906514) + (xy 92.515266 108.904465) (xy 92.457142 108.803791) (xy 92.45714 108.803789) (xy 92.457139 108.803787) + (xy 92.373263 108.719911) (xy 92.37326 108.719909) (xy 92.373258 108.719907) (xy 92.270539 108.660602) + (xy 92.27054 108.660602) (xy 92.257001 108.656974) (xy 92.155959 108.6299) (xy 92.037341 108.6299) + (xy 91.967217 108.648689) (xy 91.922759 108.660602) (xy 91.820041 108.719907) (xy 91.736157 108.803791) + (xy 91.676852 108.906509) (xy 91.663961 108.954618) (xy 91.64615 109.021091) (xy 80.830859 109.021091) + (xy 80.830113 108.2835) (xy 80.828085 106.277391) (xy 105.03045 106.277391) (xy 105.03045 106.396009) + (xy 105.056975 106.495) (xy 105.061152 106.51059) (xy 105.120457 106.613308) (xy 105.120459 106.61331) + (xy 105.120461 106.613313) (xy 105.204337 106.697189) (xy 105.204339 106.69719) (xy 105.204341 106.697192) + (xy 105.30706 106.756497) (xy 105.307061 106.756497) (xy 105.307064 106.756499) (xy 105.421641 106.7872) + (xy 105.421643 106.7872) (xy 105.540257 106.7872) (xy 105.540259 106.7872) (xy 105.654836 106.756499) + (xy 105.654838 106.756497) (xy 105.65484 106.756497) (xy 105.757558 106.697192) (xy 105.757558 106.697191) + (xy 105.757563 106.697189) (xy 105.841439 106.613313) (xy 105.900749 106.510586) (xy 105.93145 106.396009) + (xy 105.93145 106.277391) (xy 105.900749 106.162814) (xy 105.900747 106.162811) (xy 105.900747 106.162809) + (xy 105.841442 106.060091) (xy 105.84144 106.060089) (xy 105.841439 106.060087) (xy 105.766543 105.985191) + (xy 112.74115 105.985191) (xy 112.74115 106.103809) (xy 112.767781 106.203195) (xy 112.771852 106.21839) + (xy 112.831157 106.321108) (xy 112.831159 106.32111) (xy 112.831161 106.321113) (xy 112.915037 106.404989) + (xy 112.915039 106.40499) (xy 112.915041 106.404992) (xy 113.01776 106.464297) (xy 113.017761 106.464297) + (xy 113.017764 106.464299) (xy 113.132341 106.495) (xy 113.132343 106.495) (xy 113.250957 106.495) + (xy 113.250959 106.495) (xy 113.365536 106.464299) (xy 113.365538 106.464297) (xy 113.36554 106.464297) + (xy 113.468258 106.404992) (xy 113.468258 106.404991) (xy 113.468263 106.404989) (xy 113.552139 106.321113) + (xy 113.611449 106.218386) (xy 113.64215 106.103809) (xy 113.64215 105.985191) (xy 113.611449 105.870614) + (xy 113.611447 105.870611) (xy 113.611447 105.870609) (xy 113.552142 105.767891) (xy 113.55214 105.767889) + (xy 113.552139 105.767887) (xy 113.468263 105.684011) (xy 113.46826 105.684009) (xy 113.468258 105.684007) + (xy 113.365539 105.624702) (xy 113.36554 105.624702) (xy 113.352001 105.621074) (xy 113.250959 105.594) + (xy 113.132341 105.594) (xy 113.062217 105.612789) (xy 113.017759 105.624702) (xy 112.915041 105.684007) + (xy 112.831157 105.767891) (xy 112.771852 105.870609) (xy 112.759448 105.916901) (xy 112.74115 105.985191) + (xy 105.766543 105.985191) (xy 105.757563 105.976211) (xy 105.75756 105.976209) (xy 105.757558 105.976207) + (xy 105.654839 105.916902) (xy 105.65484 105.916902) (xy 105.641301 105.913274) (xy 105.540259 105.8862) + (xy 105.421641 105.8862) (xy 105.351517 105.904989) (xy 105.307059 105.916902) (xy 105.204341 105.976207) + (xy 105.120457 106.060091) (xy 105.061152 106.162809) (xy 105.061151 106.162814) (xy 105.03045 106.277391) + (xy 80.828085 106.277391) (xy 80.828079 106.271002) (xy 80.827134 105.336491) (xy 115.29295 105.336491) + (xy 115.29295 105.455109) (xy 115.306848 105.506977) (xy 115.323652 105.56969) (xy 115.382957 105.672408) + (xy 115.382959 105.67241) (xy 115.382961 105.672413) (xy 115.466837 105.756289) (xy 115.466839 105.75629) + (xy 115.466841 105.756292) (xy 115.56956 105.815597) (xy 115.569561 105.815597) (xy 115.569564 105.815599) + (xy 115.684141 105.8463) (xy 115.684143 105.8463) (xy 115.802757 105.8463) (xy 115.802759 105.8463) + (xy 115.917336 105.815599) (xy 115.917338 105.815597) (xy 115.91734 105.815597) (xy 116.020058 105.756292) + (xy 116.020058 105.756291) (xy 116.020063 105.756289) (xy 116.103939 105.672413) (xy 116.161278 105.5731) + (xy 116.163247 105.56969) (xy 116.163247 105.569688) (xy 116.163249 105.569686) (xy 116.19395 105.455109) + (xy 116.19395 105.336491) (xy 116.163249 105.221914) (xy 116.163247 105.221911) (xy 116.163247 105.221909) + (xy 116.103942 105.119191) (xy 116.10394 105.119189) (xy 116.103939 105.119187) (xy 116.020063 105.035311) + (xy 116.02006 105.035309) (xy 116.020058 105.035307) (xy 115.917339 104.976002) (xy 115.91734 104.976002) + (xy 115.903801 104.972374) (xy 115.802759 104.9453) (xy 115.684141 104.9453) (xy 115.614017 104.964089) + (xy 115.569559 104.976002) (xy 115.466841 105.035307) (xy 115.382957 105.119191) (xy 115.323652 105.221909) + (xy 115.323651 105.221914) (xy 115.29295 105.336491) (xy 80.827134 105.336491) (xy 80.827128 105.330102) + (xy 80.825783 104.000191) (xy 90.64625 104.000191) (xy 90.64625 104.118809) (xy 90.670613 104.209732) + (xy 90.676952 104.23339) (xy 90.736257 104.336108) (xy 90.736259 104.33611) (xy 90.736261 104.336113) + (xy 90.820137 104.419989) (xy 90.820139 104.41999) (xy 90.820141 104.419992) (xy 90.92286 104.479297) + (xy 90.922861 104.479297) (xy 90.922864 104.479299) (xy 91.037441 104.51) (xy 91.037443 104.51) + (xy 91.156057 104.51) (xy 91.156059 104.51) (xy 91.270636 104.479299) (xy 91.270638 104.479297) + (xy 91.27064 104.479297) (xy 91.373358 104.419992) (xy 91.373358 104.419991) (xy 91.373363 104.419989) + (xy 91.457239 104.336113) (xy 91.461986 104.327891) (xy 91.516547 104.23339) (xy 91.516547 104.233388) + (xy 91.516549 104.233386) (xy 91.54725 104.118809) (xy 91.54725 104.000191) (xy 91.516549 103.885614) + (xy 91.516547 103.885611) (xy 91.516547 103.885609) (xy 91.457242 103.782891) (xy 91.45724 103.782889) + (xy 91.457239 103.782887) (xy 91.373363 103.699011) (xy 91.37336 103.699009) (xy 91.373358 103.699007) + (xy 91.270639 103.639702) (xy 91.27064 103.639702) (xy 91.257101 103.636074) (xy 91.156059 103.609) + (xy 91.037441 103.609) (xy 90.979274 103.624586) (xy 90.922859 103.639702) (xy 90.820141 103.699007) + (xy 90.736257 103.782891) (xy 90.676952 103.885609) (xy 90.672132 103.903598) (xy 90.64625 104.000191) + (xy 80.825783 104.000191) (xy 80.825777 103.993802) (xy 80.825168 103.391391) (xy 99.02295 103.391391) + (xy 99.02295 103.510009) (xy 99.044089 103.5889) (xy 99.053652 103.62459) (xy 99.112957 103.727308) + (xy 99.112959 103.72731) (xy 99.112961 103.727313) (xy 99.196837 103.811189) (xy 99.196839 103.81119) + (xy 99.196841 103.811192) (xy 99.29956 103.870497) (xy 99.299561 103.870497) (xy 99.299564 103.870499) + (xy 99.414141 103.9012) (xy 99.414143 103.9012) (xy 99.532757 103.9012) (xy 99.532759 103.9012) + (xy 99.647336 103.870499) (xy 99.647338 103.870497) (xy 99.64734 103.870497) (xy 99.750058 103.811192) + (xy 99.750058 103.811191) (xy 99.750063 103.811189) (xy 99.833939 103.727313) (xy 99.861884 103.678911) + (xy 99.893247 103.62459) (xy 99.893247 103.624588) (xy 99.893249 103.624586) (xy 99.92395 103.510009) + (xy 99.92395 103.395468) (xy 99.942857 103.337277) (xy 99.952946 103.325464) (xy 100.775215 102.503196) + (xy 100.829732 102.475419) (xy 100.845219 102.4742) (xy 113.794427 102.4742) (xy 113.852618 102.493107) + (xy 113.888582 102.542607) (xy 113.888582 102.603793) (xy 113.852618 102.653293) (xy 113.820052 102.668825) + (xy 113.764956 102.683589) (xy 113.727959 102.693502) (xy 113.625241 102.752807) (xy 113.541357 102.836691) + (xy 113.482052 102.939409) (xy 113.46609 102.998981) (xy 113.45135 103.053991) (xy 113.45135 103.172609) + (xy 113.465524 103.225507) (xy 113.482052 103.28719) (xy 113.541357 103.389908) (xy 113.541359 103.38991) + (xy 113.541361 103.389913) (xy 113.625237 103.473789) (xy 113.625239 103.47379) (xy 113.625241 103.473792) + (xy 113.72796 103.533097) (xy 113.727961 103.533097) (xy 113.727964 103.533099) (xy 113.842541 103.5638) + (xy 113.842543 103.5638) (xy 113.961157 103.5638) (xy 113.961159 103.5638) (xy 114.075736 103.533099) + (xy 114.075738 103.533097) (xy 114.07574 103.533097) (xy 114.086835 103.526691) (xy 132.97905 103.526691) + (xy 132.97905 103.645309) (xy 133.001022 103.727308) (xy 133.009752 103.75989) (xy 133.069057 103.862608) + (xy 133.069059 103.86261) (xy 133.069061 103.862613) (xy 133.152937 103.946489) (xy 133.152939 103.94649) + (xy 133.152941 103.946492) (xy 133.25566 104.005797) (xy 133.255661 104.005797) (xy 133.255664 104.005799) + (xy 133.370241 104.0365) (xy 133.370243 104.0365) (xy 133.488857 104.0365) (xy 133.488859 104.0365) + (xy 133.603436 104.005799) (xy 133.603438 104.005797) (xy 133.60344 104.005797) (xy 133.647964 103.980091) + (xy 175.61625 103.980091) (xy 175.61625 104.098709) (xy 175.621636 104.118809) (xy 175.646952 104.21329) + (xy 175.706257 104.316008) (xy 175.706259 104.31601) (xy 175.706261 104.316013) (xy 175.790137 104.399889) + (xy 175.790139 104.39989) (xy 175.790141 104.399892) (xy 175.89286 104.459197) (xy 175.892861 104.459197) + (xy 175.892864 104.459199) (xy 176.007441 104.4899) (xy 176.007443 104.4899) (xy 176.126057 104.4899) + (xy 176.126059 104.4899) (xy 176.240636 104.459199) (xy 176.240638 104.459197) (xy 176.24064 104.459197) + (xy 176.343358 104.399892) (xy 176.343358 104.399891) (xy 176.343363 104.399889) (xy 176.427239 104.316013) + (xy 176.432511 104.306882) (xy 176.486547 104.21329) (xy 176.486547 104.213288) (xy 176.486549 104.213286) + (xy 176.51725 104.098709) (xy 176.51725 103.980091) (xy 176.486549 103.865514) (xy 176.486547 103.865511) + (xy 176.486547 103.865509) (xy 176.427242 103.762791) (xy 176.42724 103.762789) (xy 176.427239 103.762787) + (xy 176.343363 103.678911) (xy 176.34336 103.678909) (xy 176.343358 103.678907) (xy 176.240639 103.619602) + (xy 176.24064 103.619602) (xy 176.223219 103.614934) (xy 176.126059 103.5889) (xy 176.007441 103.5889) + (xy 175.937317 103.607689) (xy 175.892859 103.619602) (xy 175.790141 103.678907) (xy 175.706257 103.762791) + (xy 175.646952 103.865509) (xy 175.641565 103.885614) (xy 175.61625 103.980091) (xy 133.647964 103.980091) + (xy 133.706158 103.946492) (xy 133.706158 103.946491) (xy 133.706163 103.946489) (xy 133.790039 103.862613) + (xy 133.836067 103.782891) (xy 133.849347 103.75989) (xy 133.849347 103.759888) (xy 133.849349 103.759886) + (xy 133.88005 103.645309) (xy 133.88005 103.526691) (xy 133.849349 103.412114) (xy 133.849347 103.412111) + (xy 133.849347 103.412109) (xy 133.790042 103.309391) (xy 133.79004 103.309389) (xy 133.790039 103.309387) + (xy 133.706163 103.225511) (xy 133.70616 103.225509) (xy 133.706158 103.225507) (xy 133.603439 103.166202) + (xy 133.60344 103.166202) (xy 133.589901 103.162574) (xy 133.488859 103.1355) (xy 133.370241 103.1355) + (xy 133.300117 103.154289) (xy 133.255659 103.166202) (xy 133.152941 103.225507) (xy 133.069057 103.309391) + (xy 133.009752 103.412109) (xy 132.999546 103.450198) (xy 132.97905 103.526691) (xy 114.086835 103.526691) + (xy 114.178458 103.473792) (xy 114.178458 103.473791) (xy 114.178463 103.473789) (xy 114.262339 103.389913) + (xy 114.262342 103.389908) (xy 114.321647 103.28719) (xy 114.321647 103.287188) (xy 114.321649 103.287186) + (xy 114.35235 103.172609) (xy 114.35235 103.053991) (xy 114.321649 102.939414) (xy 114.321647 102.939411) + (xy 114.321647 102.939409) (xy 114.262342 102.836691) (xy 114.26234 102.836689) (xy 114.262339 102.836687) + (xy 114.178463 102.752811) (xy 114.17846 102.752809) (xy 114.178458 102.752807) (xy 114.075739 102.693502) + (xy 114.07574 102.693502) (xy 114.064535 102.690499) (xy 113.983648 102.668826) (xy 113.932335 102.635503) + (xy 113.910409 102.578381) (xy 113.926245 102.519281) (xy 113.973795 102.480775) (xy 114.009273 102.4742) + (xy 171.969479 102.4742) (xy 172.027535 102.450151) (xy 172.061547 102.436064) (xy 172.23382 102.263791) + (xy 188.21925 102.263791) (xy 188.21925 102.382409) (xy 188.244172 102.475419) (xy 188.249952 102.49699) + (xy 188.309257 102.599708) (xy 188.309259 102.59971) (xy 188.309261 102.599713) (xy 188.393137 102.683589) + (xy 188.393139 102.68359) (xy 188.393141 102.683592) (xy 188.49586 102.742897) (xy 188.495861 102.742897) + (xy 188.495864 102.742899) (xy 188.610441 102.7736) (xy 188.610443 102.7736) (xy 188.729057 102.7736) + (xy 188.729059 102.7736) (xy 188.843636 102.742899) (xy 188.843638 102.742897) (xy 188.84364 102.742897) + (xy 188.946358 102.683592) (xy 188.946358 102.683591) (xy 188.946363 102.683589) (xy 189.030239 102.599713) + (xy 189.061273 102.545961) (xy 189.089547 102.49699) (xy 189.089547 102.496988) (xy 189.089549 102.496986) + (xy 189.12025 102.382409) (xy 189.12025 102.263791) (xy 189.089549 102.149214) (xy 189.089547 102.149211) + (xy 189.089547 102.149209) (xy 189.030242 102.046491) (xy 189.03024 102.046489) (xy 189.030239 102.046487) + (xy 188.946363 101.962611) (xy 188.94636 101.962609) (xy 188.946358 101.962607) (xy 188.843639 101.903302) + (xy 188.84364 101.903302) (xy 188.830101 101.899674) (xy 188.729059 101.8726) (xy 188.610441 101.8726) + (xy 188.540317 101.891389) (xy 188.495859 101.903302) (xy 188.393141 101.962607) (xy 188.309257 102.046491) + (xy 188.249952 102.149209) (xy 188.232787 102.213269) (xy 188.21925 102.263791) (xy 172.23382 102.263791) + (xy 175.558714 98.938895) (xy 175.613231 98.911119) (xy 175.628718 98.9099) (xy 175.743257 98.9099) + (xy 175.743259 98.9099) (xy 175.857836 98.879199) (xy 175.857838 98.879197) (xy 175.85784 98.879197) + (xy 175.960558 98.819892) (xy 175.960558 98.819891) (xy 175.960563 98.819889) (xy 176.044439 98.736013) + (xy 176.103749 98.633286) (xy 176.13445 98.518709) (xy 176.13445 98.400091) (xy 176.103749 98.285514) + (xy 176.103747 98.285511) (xy 176.103747 98.285509) (xy 176.044442 98.182791) (xy 176.04444 98.182789) + (xy 176.044439 98.182787) (xy 175.960563 98.098911) (xy 175.96056 98.098909) (xy 175.960558 98.098907) + (xy 175.857839 98.039602) (xy 175.85784 98.039602) (xy 175.844301 98.035974) (xy 175.743259 98.0089) + (xy 175.624641 98.0089) (xy 175.554517 98.027689) (xy 175.510059 98.039602) (xy 175.407341 98.098907) + (xy 175.323457 98.182791) (xy 175.264152 98.285509) (xy 175.23345 98.400092) (xy 175.23345 98.51463) + (xy 175.214543 98.572821) (xy 175.204454 98.584634) (xy 171.844885 101.944204) (xy 171.790368 101.971981) + (xy 171.774881 101.9732) (xy 100.650621 101.9732) (xy 100.558553 102.011335) (xy 99.598683 102.971204) + (xy 99.544167 102.998981) (xy 99.52868 103.0002) (xy 99.414141 103.0002) (xy 99.344017 103.018989) + (xy 99.299559 103.030902) (xy 99.196841 103.090207) (xy 99.112957 103.174091) (xy 99.053652 103.276809) + (xy 99.044923 103.309387) (xy 99.02295 103.391391) (xy 80.825168 103.391391) (xy 80.825162 103.385002) + (xy 80.824028 102.263791) (xy 98.67555 102.263791) (xy 98.67555 102.382409) (xy 98.700472 102.475419) + (xy 98.706252 102.49699) (xy 98.765557 102.599708) (xy 98.765559 102.59971) (xy 98.765561 102.599713) + (xy 98.849437 102.683589) (xy 98.849439 102.68359) (xy 98.849441 102.683592) (xy 98.95216 102.742897) + (xy 98.952161 102.742897) (xy 98.952164 102.742899) (xy 99.066741 102.7736) (xy 99.066743 102.7736) + (xy 99.185357 102.7736) (xy 99.185359 102.7736) (xy 99.299936 102.742899) (xy 99.299938 102.742897) + (xy 99.29994 102.742897) (xy 99.402658 102.683592) (xy 99.402658 102.683591) (xy 99.402663 102.683589) + (xy 99.486539 102.599713) (xy 99.517573 102.545961) (xy 99.545847 102.49699) (xy 99.545847 102.496988) + (xy 99.545849 102.496986) (xy 99.57655 102.382409) (xy 99.57655 102.263791) (xy 99.545849 102.149214) + (xy 99.545847 102.149211) (xy 99.545847 102.149209) (xy 99.486542 102.046491) (xy 99.48654 102.046489) + (xy 99.486539 102.046487) (xy 99.402663 101.962611) (xy 99.40266 101.962609) (xy 99.402658 101.962607) + (xy 99.299939 101.903302) (xy 99.29994 101.903302) (xy 99.286401 101.899674) (xy 99.185359 101.8726) + (xy 99.066741 101.8726) (xy 98.996617 101.891389) (xy 98.952159 101.903302) (xy 98.849441 101.962607) + (xy 98.765557 102.046491) (xy 98.706252 102.149209) (xy 98.689087 102.213269) (xy 98.67555 102.263791) + (xy 80.824028 102.263791) (xy 80.824022 102.257402) (xy 80.82291 101.158091) (xy 97.92335 101.158091) + (xy 97.92335 101.276709) (xy 97.950424 101.377751) (xy 97.954052 101.39129) (xy 98.013357 101.494008) + (xy 98.013359 101.49401) (xy 98.013361 101.494013) (xy 98.097237 101.577889) (xy 98.097239 101.57789) + (xy 98.097241 101.577892) (xy 98.19996 101.637197) (xy 98.199961 101.637197) (xy 98.199964 101.637199) + (xy 98.314541 101.6679) (xy 98.314543 101.6679) (xy 98.433157 101.6679) (xy 98.433159 101.6679) + (xy 98.547736 101.637199) (xy 98.547738 101.637197) (xy 98.54774 101.637197) (xy 98.650458 101.577892) + (xy 98.650458 101.577891) (xy 98.650463 101.577889) (xy 98.734339 101.494013) (xy 98.793649 101.391286) + (xy 98.82435 101.276709) (xy 98.82435 101.158091) (xy 98.793649 101.043514) (xy 98.793647 101.043511) + (xy 98.793647 101.043509) (xy 98.734342 100.940791) (xy 98.73434 100.940789) (xy 98.734339 100.940787) + (xy 98.650463 100.856911) (xy 98.65046 100.856909) (xy 98.650458 100.856907) (xy 98.547739 100.797602) + (xy 98.54774 100.797602) (xy 98.534201 100.793974) (xy 98.433159 100.7669) (xy 98.314541 100.7669) + (xy 98.244417 100.785689) (xy 98.199959 100.797602) (xy 98.097241 100.856907) (xy 98.013357 100.940791) + (xy 97.954052 101.043509) (xy 97.954051 101.043514) (xy 97.92335 101.158091) (xy 80.82291 101.158091) + (xy 80.822904 101.151702) (xy 80.822289 100.5436) (xy 80.821898 100.156391) (xy 102.13945 100.156391) + (xy 102.13945 100.275009) (xy 102.166524 100.376051) (xy 102.170152 100.38959) (xy 102.229457 100.492308) + (xy 102.229459 100.49231) (xy 102.229461 100.492313) (xy 102.313337 100.576189) (xy 102.313339 100.57619) + (xy 102.313341 100.576192) (xy 102.41606 100.635497) (xy 102.416061 100.635497) (xy 102.416064 100.635499) + (xy 102.530641 100.6662) (xy 102.530643 100.6662) (xy 102.649257 100.6662) (xy 102.649259 100.6662) + (xy 102.763836 100.635499) (xy 102.763838 100.635497) (xy 102.76384 100.635497) (xy 102.866558 100.576192) + (xy 102.866558 100.576191) (xy 102.866563 100.576189) (xy 102.950439 100.492313) (xy 103.009749 100.389586) + (xy 103.04045 100.275009) (xy 103.04045 100.156391) (xy 103.009749 100.041814) (xy 103.009747 100.041811) + (xy 103.009747 100.041809) (xy 102.950442 99.939091) (xy 102.95044 99.939089) (xy 102.950439 99.939087) + (xy 102.866563 99.855211) (xy 102.86656 99.855209) (xy 102.866558 99.855207) (xy 102.763839 99.795902) + (xy 102.76384 99.795902) (xy 102.724515 99.785365) (xy 102.649259 99.7652) (xy 102.530641 99.7652) + (xy 102.460517 99.783989) (xy 102.416059 99.795902) (xy 102.313341 99.855207) (xy 102.229457 99.939091) + (xy 102.170152 100.041809) (xy 102.170151 100.041814) (xy 102.13945 100.156391) (xy 80.821898 100.156391) + (xy 80.818886 97.176991) (xy 106.05325 97.176991) (xy 106.05325 97.295609) (xy 106.078866 97.391207) + (xy 106.083952 97.41019) (xy 106.143257 97.512908) (xy 106.143259 97.51291) (xy 106.143261 97.512913) + (xy 106.227137 97.596789) (xy 106.227139 97.59679) (xy 106.227141 97.596792) (xy 106.32986 97.656097) + (xy 106.329861 97.656097) (xy 106.329864 97.656099) (xy 106.444441 97.6868) (xy 106.444443 97.6868) + (xy 106.563057 97.6868) (xy 106.563059 97.6868) (xy 106.677636 97.656099) (xy 106.677638 97.656097) + (xy 106.67764 97.656097) (xy 106.780358 97.596792) (xy 106.780358 97.596791) (xy 106.780363 97.596789) + (xy 106.864239 97.512913) (xy 106.904895 97.442495) (xy 106.923547 97.41019) (xy 106.923547 97.410188) + (xy 106.923549 97.410186) (xy 106.95425 97.295609) (xy 106.95425 97.176991) (xy 106.923549 97.062414) + (xy 106.923547 97.062411) (xy 106.923547 97.062409) (xy 106.864242 96.959691) (xy 106.86424 96.959689) + (xy 106.864239 96.959687) (xy 106.780363 96.875811) (xy 106.78036 96.875809) (xy 106.780358 96.875807) + (xy 106.677639 96.816502) (xy 106.67764 96.816502) (xy 106.635628 96.805245) (xy 106.563059 96.7858) + (xy 106.444441 96.7858) (xy 106.374317 96.804589) (xy 106.329859 96.816502) (xy 106.227141 96.875807) + (xy 106.143257 96.959691) (xy 106.083952 97.062409) (xy 106.070337 97.113221) (xy 106.05325 97.176991) + (xy 80.818886 97.176991) (xy 80.817092 95.402891) (xy 102.47065 95.402891) (xy 102.47065 95.521509) + (xy 102.491601 95.5997) (xy 102.501352 95.63609) (xy 102.560657 95.738808) (xy 102.560659 95.73881) + (xy 102.560661 95.738813) (xy 102.644537 95.822689) (xy 102.644539 95.82269) (xy 102.644541 95.822692) + (xy 102.74726 95.881997) (xy 102.747261 95.881997) (xy 102.747264 95.881999) (xy 102.861841 95.9127) + (xy 102.861843 95.9127) (xy 102.980457 95.9127) (xy 102.980459 95.9127) (xy 103.095036 95.881999) + (xy 103.095038 95.881997) (xy 103.09504 95.881997) (xy 103.197758 95.822692) (xy 103.197758 95.822691) + (xy 103.197763 95.822689) (xy 103.281639 95.738813) (xy 103.322298 95.66839) (xy 103.340947 95.63609) + (xy 103.340947 95.636088) (xy 103.340949 95.636086) (xy 103.37165 95.521509) (xy 103.37165 95.402891) + (xy 103.340949 95.288314) (xy 103.340947 95.288311) (xy 103.340947 95.288309) (xy 103.281642 95.185591) + (xy 103.28164 95.185589) (xy 103.281639 95.185587) (xy 103.197763 95.101711) (xy 103.19776 95.101709) + (xy 103.197758 95.101707) (xy 103.095039 95.042402) (xy 103.09504 95.042402) (xy 103.064575 95.034239) + (xy 102.980459 95.0117) (xy 102.861841 95.0117) (xy 102.791717 95.030489) (xy 102.747259 95.042402) + (xy 102.644541 95.101707) (xy 102.560657 95.185591) (xy 102.501352 95.288309) (xy 102.487525 95.339913) + (xy 102.47065 95.402891) (xy 80.817092 95.402891) (xy 80.814945 93.278791) (xy 92.91615 93.278791) + (xy 92.91615 93.397409) (xy 92.935576 93.469907) (xy 92.946852 93.51199) (xy 93.006157 93.614708) + (xy 93.006159 93.61471) (xy 93.006161 93.614713) (xy 93.090037 93.698589) (xy 93.090039 93.69859) + (xy 93.090041 93.698592) (xy 93.19276 93.757897) (xy 93.192761 93.757897) (xy 93.192764 93.757899) + (xy 93.307341 93.7886) (xy 93.307343 93.7886) (xy 93.425957 93.7886) (xy 93.425959 93.7886) (xy 93.540536 93.757899) + (xy 93.540538 93.757897) (xy 93.54054 93.757897) (xy 93.643258 93.698592) (xy 93.643258 93.698591) + (xy 93.643263 93.698589) (xy 93.727139 93.614713) (xy 93.738721 93.594653) (xy 93.786447 93.51199) + (xy 93.786447 93.511988) (xy 93.786449 93.511986) (xy 93.81715 93.397409) (xy 93.81715 93.294491) + (xy 99.03025 93.294491) (xy 99.03025 93.413109) (xy 99.056744 93.511986) (xy 99.060952 93.52769) + (xy 99.120257 93.630408) (xy 99.120259 93.63041) (xy 99.120261 93.630413) (xy 99.204137 93.714289) + (xy 99.204139 93.71429) (xy 99.204141 93.714292) (xy 99.30686 93.773597) (xy 99.306861 93.773597) + (xy 99.306864 93.773599) (xy 99.421441 93.8043) (xy 99.421443 93.8043) (xy 99.540057 93.8043) (xy 99.540059 93.8043) + (xy 99.654636 93.773599) (xy 99.654638 93.773597) (xy 99.65464 93.773597) (xy 99.757358 93.714292) + (xy 99.757358 93.714291) (xy 99.757363 93.714289) (xy 99.841239 93.630413) (xy 99.844653 93.6245) + (xy 99.900547 93.52769) (xy 99.900547 93.527688) (xy 99.900549 93.527686) (xy 99.93125 93.413109) + (xy 99.93125 93.294491) (xy 99.900549 93.179914) (xy 99.900547 93.179911) (xy 99.900547 93.179909) + (xy 99.841242 93.077191) (xy 99.84124 93.077189) (xy 99.841239 93.077187) (xy 99.757363 92.993311) + (xy 99.75736 92.993309) (xy 99.757358 92.993307) (xy 99.654639 92.934002) (xy 99.65464 92.934002) + (xy 99.63923 92.929873) (xy 99.540059 92.9033) (xy 99.421441 92.9033) (xy 99.351317 92.922089) (xy 99.306859 92.934002) + (xy 99.204141 92.993307) (xy 99.120257 93.077191) (xy 99.060952 93.179909) (xy 99.043787 93.243969) + (xy 99.03025 93.294491) (xy 93.81715 93.294491) (xy 93.81715 93.278791) (xy 93.786449 93.164214) + (xy 93.786447 93.164211) (xy 93.786447 93.164209) (xy 93.727142 93.061491) (xy 93.72714 93.061489) + (xy 93.727139 93.061487) (xy 93.643263 92.977611) (xy 93.64326 92.977609) (xy 93.643258 92.977607) + (xy 93.540539 92.918302) (xy 93.54054 92.918302) (xy 93.494975 92.906093) (xy 93.425959 92.8876) + (xy 93.307341 92.8876) (xy 93.248748 92.9033) (xy 93.192759 92.918302) (xy 93.090041 92.977607) + (xy 93.006157 93.061491) (xy 92.946852 93.164209) (xy 92.936406 93.203195) (xy 92.91615 93.278791) + (xy 80.814945 93.278791) (xy 80.805912 84.342291) (xy 93.69865 84.342291) (xy 93.69865 84.460909) + (xy 93.716122 84.526114) (xy 93.729352 84.57549) (xy 93.788657 84.678208) (xy 93.788659 84.67821) + (xy 93.788661 84.678213) (xy 93.872537 84.762089) (xy 93.872539 84.76209) (xy 93.872541 84.762092) + (xy 93.97526 84.821397) (xy 93.975261 84.821397) (xy 93.975264 84.821399) (xy 94.089841 84.8521) + (xy 94.089843 84.8521) (xy 94.208457 84.8521) (xy 94.208459 84.8521) (xy 94.323036 84.821399) (xy 94.323038 84.821397) + (xy 94.32304 84.821397) (xy 94.425758 84.762092) (xy 94.425758 84.762091) (xy 94.425763 84.762089) + (xy 94.509639 84.678213) (xy 94.55202 84.604808) (xy 94.568947 84.57549) (xy 94.568947 84.575488) + (xy 94.568949 84.575486) (xy 94.59965 84.460909) (xy 94.59965 84.342291) (xy 94.568949 84.227714) + (xy 94.568947 84.227711) (xy 94.568947 84.227709) (xy 94.509642 84.124991) (xy 94.50964 84.124989) + (xy 94.509639 84.124987) (xy 94.425763 84.041111) (xy 94.42576 84.041109) (xy 94.425758 84.041107) + (xy 94.323039 83.981802) (xy 94.32304 83.981802) (xy 94.309501 83.978174) (xy 94.208459 83.9511) + (xy 94.089841 83.9511) (xy 94.022127 83.969244) (xy 93.975259 83.981802) (xy 93.872541 84.041107) + (xy 93.788657 84.124991) (xy 93.729352 84.227709) (xy 93.716382 84.276114) (xy 93.69865 84.342291) + (xy 80.805912 84.342291) (xy 80.795006 73.553271) (xy 87.49115 73.553271) (xy 87.49115 73.652928) + (xy 87.529284 73.744994) (xy 87.529285 73.744995) (xy 87.529286 73.744997) (xy 105.762155 91.977866) + (xy 105.789931 92.032381) (xy 105.79115 92.047868) (xy 105.79115 95.512928) (xy 105.829284 95.604994) + (xy 105.829285 95.604995) (xy 105.829286 95.604997) (xy 110.659285 100.434995) (xy 110.659286 100.434997) + (xy 110.729753 100.505464) (xy 110.76789 100.52126) (xy 110.807271 100.537573) (xy 110.82182 100.5436) + (xy 110.821823 100.543601) (xy 110.821826 100.543601) (xy 110.933001 100.543601) (xy 110.933009 100.5436) + (xy 112.511479 100.5436) (xy 112.569535 100.519551) (xy 112.603547 100.505464) (xy 117.826414 95.282595) + (xy 117.833085 95.279196) (xy 117.837424 95.273097) (xy 117.859149 95.265916) (xy 117.880931 95.254819) + (xy 117.895422 95.253605) (xy 117.895919 95.2536) (xy 118.010959 95.2536) (xy 118.015448 95.252396) + (xy 118.026467 95.252286) (xy 118.050221 95.259741) (xy 118.074697 95.264276) (xy 118.081966 95.269703) + (xy 118.084845 95.270607) (xy 118.086918 95.2734) (xy 118.097463 95.281274) (xy 118.141618 95.325429) + (xy 118.176584 95.339912) (xy 118.176585 95.339913) (xy 118.176586 95.339913) (xy 118.233688 95.363566) + (xy 118.233689 95.363566) (xy 118.344866 95.363566) (xy 118.344874 95.363565) (xy 122.831514 95.363565) + (xy 122.903329 95.333818) (xy 122.923582 95.325429) (xy 123.946646 94.302363) (xy 124.001163 94.274587) + (xy 124.061595 94.284158) (xy 124.086654 94.302364) (xy 124.239285 94.454995) (xy 124.239285 94.454996) + (xy 124.277084 94.492796) (xy 124.292816 94.513299) (xy 124.331157 94.579708) (xy 124.331159 94.57971) + (xy 124.331161 94.579713) (xy 124.415037 94.663589) (xy 124.415039 94.66359) (xy 124.415041 94.663592) + (xy 124.51776 94.722897) (xy 124.517761 94.722897) (xy 124.517764 94.722899) (xy 124.632341 94.7536) + (xy 124.632345 94.7536) (xy 124.633518 94.753755) (xy 124.634282 94.754119) (xy 124.638609 94.755279) + (xy 124.638394 94.75608) (xy 124.688744 94.780095) (xy 124.71794 94.833865) (xy 124.716225 94.87753) + (xy 124.70115 94.933791) (xy 124.70115 95.052409) (xy 124.714361 95.101711) (xy 124.731851 95.166987) + (xy 124.779721 95.249899) (xy 124.784282 95.271359) (xy 124.792679 95.291628) (xy 124.79051 95.30066) + (xy 124.792442 95.309747) (xy 124.783518 95.32979) (xy 124.778397 95.351123) (xy 124.771333 95.357156) + (xy 124.767555 95.365643) (xy 124.731873 95.390862) (xy 124.709818 95.399998) (xy 124.702836 95.40289) + (xy 124.702834 95.402891) (xy 124.659753 95.420735) (xy 124.539284 95.541204) (xy 124.513474 95.603515) + (xy 124.492017 95.635629) (xy 124.471162 95.656485) (xy 124.411852 95.759211) (xy 124.411851 95.759213) + (xy 124.411851 95.759214) (xy 124.38115 95.873791) (xy 124.38115 95.992409) (xy 124.396153 96.048399) + (xy 124.411852 96.10699) (xy 124.436338 96.1494) (xy 124.44906 96.209248) (xy 124.424173 96.265144) + (xy 124.371185 96.295737) (xy 124.350602 96.2979) (xy 123.810159 96.2979) (xy 123.751968 96.278993) + (xy 123.740161 96.268909) (xy 123.659163 96.187911) (xy 123.65916 96.187909) (xy 123.659158 96.187907) + (xy 123.556439 96.128602) (xy 123.55644 96.128602) (xy 123.542901 96.124974) (xy 123.441859 96.0979) + (xy 123.323241 96.0979) (xy 123.253117 96.116689) (xy 123.208659 96.128602) (xy 123.105941 96.187907) + (xy 123.022057 96.271791) (xy 122.962752 96.374509) (xy 122.953777 96.408004) (xy 122.93205 96.489091) + (xy 122.93205 96.607709) (xy 122.951344 96.679714) (xy 122.962752 96.72229) (xy 123.022057 96.825008) + (xy 123.022059 96.82501) (xy 123.022061 96.825013) (xy 123.105937 96.908889) (xy 123.105939 96.90889) + (xy 123.105941 96.908892) (xy 123.20866 96.968197) (xy 123.208661 96.968197) (xy 123.208664 96.968199) + (xy 123.323241 96.9989) (xy 123.323243 96.9989) (xy 123.441857 96.9989) (xy 123.441859 96.9989) + (xy 123.556436 96.968199) (xy 123.556438 96.968197) (xy 123.55644 96.968197) (xy 123.659158 96.908892) + (xy 123.659158 96.908891) (xy 123.659163 96.908889) (xy 123.740157 96.827894) (xy 123.794672 96.800119) + (xy 123.810159 96.7989) (xy 126.193679 96.7989) (xy 126.251735 96.774851) (xy 126.285747 96.760764) + (xy 126.916814 96.129695) (xy 126.971331 96.101919) (xy 126.986818 96.1007) (xy 136.369879 96.1007) + (xy 136.415912 96.081632) (xy 136.461947 96.062564) (xy 136.550513 95.973996) (xy 136.605029 95.946219) + (xy 136.620517 95.945) (xy 136.735057 95.945) (xy 136.735059 95.945) (xy 136.849636 95.914299) (xy 136.849638 95.914297) + (xy 136.84964 95.914297) (xy 136.952358 95.854992) (xy 136.952358 95.854991) (xy 136.952363 95.854989) + (xy 137.036239 95.771113) (xy 137.054888 95.738813) (xy 137.095547 95.66839) (xy 137.095547 95.668388) + (xy 137.095549 95.668386) (xy 137.12625 95.553809) (xy 137.12625 95.435191) (xy 137.122197 95.420065) + (xy 137.125398 95.358966) (xy 137.163902 95.311415) (xy 137.223002 95.295578) (xy 137.280124 95.317503) + (xy 137.287827 95.324438) (xy 141.116886 99.153496) (xy 141.144663 99.208013) (xy 141.135092 99.268445) + (xy 141.091827 99.31171) (xy 141.046882 99.3225) (xy 135.389518 99.3225) (xy 135.331327 99.303593) + (xy 135.319514 99.293504) (xy 134.971246 98.945236) (xy 134.943469 98.890719) (xy 134.94225 98.875232) + (xy 134.94225 98.760692) (xy 134.94225 98.760691) (xy 134.911549 98.646114) (xy 134.911547 98.646111) + (xy 134.911547 98.646109) (xy 134.852242 98.543391) (xy 134.85224 98.543389) (xy 134.852239 98.543387) + (xy 134.842642 98.53379) (xy 134.814867 98.479276) (xy 134.824438 98.418844) (xy 134.867703 98.375579) + (xy 134.928135 98.366008) (xy 134.962148 98.378053) (xy 135.05766 98.433197) (xy 135.057661 98.433197) + (xy 135.057664 98.433199) (xy 135.172241 98.4639) (xy 135.172243 98.4639) (xy 135.290857 98.4639) + (xy 135.290859 98.4639) (xy 135.405436 98.433199) (xy 135.405438 98.433197) (xy 135.40544 98.433197) + (xy 135.508158 98.373892) (xy 135.508158 98.373891) (xy 135.508163 98.373889) (xy 135.592039 98.290013) + (xy 135.594637 98.285514) (xy 135.651347 98.18729) (xy 135.651347 98.187288) (xy 135.651349 98.187286) + (xy 135.68205 98.072709) (xy 135.68205 97.954091) (xy 135.651349 97.839514) (xy 135.651347 97.839511) + (xy 135.651347 97.839509) (xy 135.592042 97.736791) (xy 135.59204 97.736789) (xy 135.592039 97.736787) + (xy 135.508163 97.652911) (xy 135.50816 97.652909) (xy 135.508158 97.652907) (xy 135.405439 97.593602) + (xy 135.40544 97.593602) (xy 135.346518 97.577814) (xy 135.290859 97.5629) (xy 135.172241 97.5629) + (xy 135.116582 97.577814) (xy 135.057659 97.593602) (xy 134.954941 97.652907) (xy 134.87106 97.736788) + (xy 134.867582 97.742813) (xy 134.846457 97.779401) (xy 134.800989 97.820341) (xy 134.760722 97.8289) + (xy 134.386633 97.8289) (xy 134.328442 97.809993) (xy 134.292478 97.760493) (xy 134.292478 97.699307) + (xy 134.328442 97.649807) (xy 134.361008 97.634273) (xy 134.413536 97.620199) (xy 134.413538 97.620197) + (xy 134.41354 97.620197) (xy 134.516258 97.560892) (xy 134.516258 97.560891) (xy 134.516263 97.560889) + (xy 134.600139 97.477013) (xy 134.620068 97.442495) (xy 134.659447 97.37429) (xy 134.659447 97.374288) + (xy 134.659449 97.374286) (xy 134.69015 97.259709) (xy 134.69015 97.141091) (xy 134.659449 97.026514) + (xy 134.659447 97.026511) (xy 134.659447 97.026509) (xy 134.614639 96.9489) (xy 134.601917 96.889052) + (xy 134.626803 96.833156) (xy 134.679791 96.802563) (xy 134.700375 96.8004) (xy 137.074481 96.8004) + (xy 137.132672 96.819307) (xy 137.144485 96.829396) (xy 137.403323 97.088234) (xy 137.656054 97.340964) + (xy 137.683831 97.395481) (xy 137.68505 97.410968) (xy 137.68505 97.525509) (xy 137.69453 97.560889) + (xy 137.715752 97.64009) (xy 137.775057 97.742808) (xy 137.775059 97.74281) (xy 137.775061 97.742813) + (xy 137.858937 97.826689) (xy 137.858939 97.82669) (xy 137.858941 97.826692) (xy 137.96166 97.885997) + (xy 137.961661 97.885997) (xy 137.961664 97.885999) (xy 138.076241 97.9167) (xy 138.076243 97.9167) + (xy 138.194857 97.9167) (xy 138.194859 97.9167) (xy 138.309436 97.885999) (xy 138.309438 97.885997) + (xy 138.30944 97.885997) (xy 138.412158 97.826692) (xy 138.412158 97.826691) (xy 138.412163 97.826689) + (xy 138.496039 97.742813) (xy 138.506785 97.7242) (xy 138.555347 97.64009) (xy 138.555347 97.640088) + (xy 138.555349 97.640086) (xy 138.58605 97.525509) (xy 138.58605 97.406891) (xy 138.555349 97.292314) + (xy 138.555347 97.292311) (xy 138.555347 97.292309) (xy 138.496042 97.189591) (xy 138.49604 97.189589) + (xy 138.496039 97.189587) (xy 138.412163 97.105711) (xy 138.41216 97.105709) (xy 138.412158 97.105707) + (xy 138.309439 97.046402) (xy 138.30944 97.046402) (xy 138.295901 97.042774) (xy 138.194859 97.0157) + (xy 138.080318 97.0157) (xy 138.022127 96.996793) (xy 138.010314 96.986704) (xy 137.708934 96.685324) + (xy 137.361147 96.337536) (xy 137.361145 96.337535) (xy 137.361144 96.337534) (xy 137.269079 96.2994) + (xy 137.269078 96.2994) (xy 127.686409 96.2994) (xy 127.686401 96.299399) (xy 127.674878 96.299399) + (xy 127.575223 96.299399) (xy 127.521289 96.321739) (xy 127.483153 96.337535) (xy 127.446584 96.374104) + (xy 127.392067 96.401881) (xy 127.376581 96.4031) (xy 127.262041 96.4031) (xy 127.191917 96.421889) + (xy 127.147459 96.433802) (xy 127.044741 96.493107) (xy 126.960857 96.576991) (xy 126.901552 96.679709) + (xy 126.900047 96.685327) (xy 126.87085 96.794291) (xy 126.87085 96.912909) (xy 126.885665 96.968199) + (xy 126.901551 97.027487) (xy 126.92881 97.0747) (xy 126.941531 97.134549) (xy 126.916644 97.190444) + (xy 126.863656 97.221037) (xy 126.843073 97.2232) (xy 122.231121 97.2232) (xy 122.139055 97.261334) + (xy 122.139053 97.261335) (xy 122.139053 97.261336) (xy 122.128183 97.272205) (xy 122.073669 97.299981) + (xy 122.058182 97.3012) (xy 121.943641 97.3012) (xy 121.873517 97.319989) (xy 121.829059 97.331902) + (xy 121.726341 97.391207) (xy 121.642457 97.475091) (xy 121.583152 97.577809) (xy 121.578066 97.596792) + (xy 121.55245 97.692391) (xy 121.55245 97.811009) (xy 121.572543 97.885997) (xy 121.583152 97.92559) + (xy 121.642457 98.028308) (xy 121.642459 98.02831) (xy 121.642461 98.028313) (xy 121.726337 98.112189) + (xy 121.726339 98.11219) (xy 121.726341 98.112192) (xy 121.82906 98.171497) (xy 121.829061 98.171497) + (xy 121.829064 98.171499) (xy 121.943641 98.2022) (xy 121.943643 98.2022) (xy 122.062257 98.2022) + (xy 122.062259 98.2022) (xy 122.176836 98.171499) (xy 122.176838 98.171497) (xy 122.17684 98.171497) + (xy 122.279558 98.112192) (xy 122.279558 98.112191) (xy 122.279563 98.112189) (xy 122.363439 98.028313) + (xy 122.363442 98.028308) (xy 122.422747 97.92559) (xy 122.422747 97.925588) (xy 122.422749 97.925586) + (xy 122.45345 97.811009) (xy 122.45345 97.811004) (xy 122.453546 97.81028) (xy 122.453771 97.809807) + (xy 122.455129 97.804741) (xy 122.456067 97.804992) (xy 122.479885 97.755054) (xy 122.533656 97.725858) + (xy 122.551699 97.7242) (xy 126.17796 97.7242) (xy 126.236151 97.743107) (xy 126.272115 97.792607) + (xy 126.272115 97.853793) (xy 126.263696 97.872701) (xy 126.244752 97.905511) (xy 126.244751 97.905513) + (xy 126.244751 97.905514) (xy 126.21405 98.020091) (xy 126.21405 98.138709) (xy 126.241124 98.239751) + (xy 126.244752 98.25329) (xy 126.304057 98.356008) (xy 126.304059 98.35601) (xy 126.304061 98.356013) + (xy 126.387937 98.439889) (xy 126.387939 98.43989) (xy 126.387941 98.439892) (xy 126.49066 98.499197) + (xy 126.490661 98.499197) (xy 126.490664 98.499199) (xy 126.605241 98.5299) (xy 126.605243 98.5299) + (xy 126.723857 98.5299) (xy 126.723859 98.5299) (xy 126.838436 98.499199) (xy 126.838438 98.499197) + (xy 126.83844 98.499197) (xy 126.941158 98.439892) (xy 126.941158 98.439891) (xy 126.941163 98.439889) + (xy 127.022157 98.358894) (xy 127.076672 98.331119) (xy 127.092159 98.3299) (xy 134.105741 98.3299) + (xy 134.163932 98.348807) (xy 134.199896 98.398307) (xy 134.199896 98.459493) (xy 134.175746 98.498901) + (xy 134.144748 98.5299) (xy 134.131258 98.54339) (xy 134.131257 98.543391) (xy 134.071952 98.646109) + (xy 134.071951 98.646114) (xy 134.04125 98.760691) (xy 134.04125 98.879309) (xy 134.058915 98.945236) + (xy 134.071952 98.99389) (xy 134.131257 99.096608) (xy 134.131259 99.09661) (xy 134.131261 99.096613) + (xy 134.215137 99.180489) (xy 134.215139 99.18049) (xy 134.215141 99.180492) (xy 134.31786 99.239797) + (xy 134.317861 99.239797) (xy 134.317864 99.239799) (xy 134.432441 99.2705) (xy 134.432443 99.2705) + (xy 134.546982 99.2705) (xy 134.605173 99.289407) (xy 134.616986 99.299496) (xy 135.032385 99.714895) + (xy 135.032386 99.714897) (xy 135.102853 99.785364) (xy 135.102854 99.785364) (xy 135.102855 99.785365) + (xy 135.194921 99.8235) (xy 135.194922 99.8235) (xy 150.533179 99.8235) (xy 150.599808 99.795901) + (xy 150.625247 99.785364) (xy 152.779018 97.631591) (xy 171.30965 97.631591) (xy 171.30965 97.750209) + (xy 171.328442 97.820341) (xy 171.340352 97.86479) (xy 171.399657 97.967508) (xy 171.399659 97.96751) + (xy 171.399661 97.967513) (xy 171.483537 98.051389) (xy 171.483539 98.05139) (xy 171.483541 98.051392) + (xy 171.58626 98.110697) (xy 171.586261 98.110697) (xy 171.586264 98.110699) (xy 171.700841 98.1414) + (xy 171.700843 98.1414) (xy 171.819457 98.1414) (xy 171.819459 98.1414) (xy 171.934036 98.110699) + (xy 171.934038 98.110697) (xy 171.93404 98.110697) (xy 172.036758 98.051392) (xy 172.036758 98.051391) + (xy 172.036763 98.051389) (xy 172.120639 97.967513) (xy 172.128388 97.954091) (xy 172.179947 97.86479) + (xy 172.179947 97.864788) (xy 172.179949 97.864786) (xy 172.21065 97.750209) (xy 172.21065 97.631591) + (xy 172.179949 97.517014) (xy 172.179947 97.517011) (xy 172.179947 97.517009) (xy 172.120642 97.414291) + (xy 172.12064 97.414289) (xy 172.120639 97.414287) (xy 172.036763 97.330411) (xy 172.03676 97.330409) + (xy 172.036758 97.330407) (xy 171.934039 97.271102) (xy 171.93404 97.271102) (xy 171.920501 97.267474) + (xy 171.819459 97.2404) (xy 171.700841 97.2404) (xy 171.630717 97.259189) (xy 171.586259 97.271102) + (xy 171.483541 97.330407) (xy 171.399657 97.414291) (xy 171.340352 97.517009) (xy 171.330146 97.555098) + (xy 171.30965 97.631591) (xy 152.779018 97.631591) (xy 152.931314 97.479295) (xy 152.985831 97.451519) + (xy 153.001318 97.4503) (xy 153.115857 97.4503) (xy 153.115859 97.4503) (xy 153.230436 97.419599) + (xy 153.230438 97.419597) (xy 153.23044 97.419597) (xy 153.333158 97.360292) (xy 153.333158 97.360291) + (xy 153.333163 97.360289) (xy 153.417039 97.276413) (xy 153.458678 97.204293) (xy 153.476347 97.17369) + (xy 153.476347 97.173688) (xy 153.476349 97.173686) (xy 153.50705 97.059109) (xy 153.50705 96.940491) + (xy 153.476349 96.825914) (xy 153.476347 96.825911) (xy 153.476347 96.825909) (xy 153.417042 96.723191) + (xy 153.41704 96.723189) (xy 153.417039 96.723187) (xy 153.333163 96.639311) (xy 153.33316 96.639309) + (xy 153.333158 96.639307) (xy 153.230439 96.580002) (xy 153.23044 96.580002) (xy 153.216901 96.576374) + (xy 153.115859 96.5493) (xy 152.997241 96.5493) (xy 152.931397 96.566943) (xy 152.882659 96.580002) + (xy 152.779941 96.639307) (xy 152.696057 96.723191) (xy 152.636752 96.825909) (xy 152.60605 96.940492) + (xy 152.60605 97.05503) (xy 152.587143 97.113221) (xy 152.577054 97.125034) (xy 150.408585 99.293504) + (xy 150.354068 99.321281) (xy 150.338581 99.3225) (xy 142.458819 99.3225) (xy 142.400628 99.303593) + (xy 142.364664 99.254093) (xy 142.364664 99.192907) (xy 142.388815 99.153496) (xy 142.921972 98.620339) + (xy 144.535994 97.006315) (xy 144.58038 96.980692) (xy 144.584836 96.979499) (xy 144.687563 96.920189) + (xy 144.771439 96.836313) (xy 144.815058 96.760764) (xy 144.830747 96.73359) (xy 144.830747 96.733588) + (xy 144.830749 96.733586) (xy 144.86145 96.619009) (xy 144.86145 96.500391) (xy 144.830749 96.385814) + (xy 144.830747 96.385811) (xy 144.830747 96.385809) (xy 144.771442 96.283091) (xy 144.77144 96.283089) + (xy 144.771439 96.283087) (xy 144.687563 96.199211) (xy 144.68756 96.199209) (xy 144.687558 96.199207) + (xy 144.584839 96.139902) (xy 144.58484 96.139902) (xy 144.571301 96.136274) (xy 144.470259 96.1092) + (xy 144.351641 96.1092) (xy 144.281517 96.127989) (xy 144.237059 96.139902) (xy 144.134341 96.199207) + (xy 144.050457 96.283091) (xy 143.991152 96.385809) (xy 143.976292 96.441269) (xy 143.96045 96.500391) + (xy 143.96045 96.619009) (xy 143.965889 96.639307) (xy 143.991152 96.733589) (xy 143.993085 96.736937) + (xy 144.005803 96.796786) (xy 143.980914 96.85268) (xy 143.97735 96.856437) (xy 142.342045 98.491742) + (xy 142.287528 98.519519) (xy 142.227096 98.509948) (xy 142.183831 98.466683) (xy 142.176416 98.447366) + (xy 142.162549 98.395614) (xy 142.162547 98.395611) (xy 142.162547 98.395609) (xy 142.103242 98.292891) + (xy 142.10324 98.292889) (xy 142.103239 98.292887) (xy 142.019363 98.209011) (xy 142.01936 98.209009) + (xy 142.019358 98.209007) (xy 141.916639 98.149702) (xy 141.91664 98.149702) (xy 141.885656 98.1414) + (xy 141.802059 98.119) (xy 141.683441 98.119) (xy 141.683436 98.119) (xy 141.641617 98.130205) (xy 141.580516 98.127001) + (xy 141.545993 98.104582) (xy 138.910915 95.469504) (xy 138.883138 95.414987) (xy 138.892709 95.354555) + (xy 138.935974 95.31129) (xy 138.980919 95.3005) (xy 202.925481 95.3005) (xy 202.983672 95.319407) + (xy 202.995485 95.329496) (xy 209.854223 102.188234) (xy 209.882 102.242751) (xy 209.872429 102.303183) + (xy 209.829164 102.346448) (xy 209.803535 102.355335) (xy 209.774822 102.361047) (xy 209.774813 102.361049) + (xy 209.592736 102.436467) (xy 209.428868 102.545961) (xy 209.428864 102.545964) (xy 209.289514 102.685314) + (xy 209.289511 102.685318) (xy 209.180017 102.849186) (xy 209.104599 103.031263) (xy 209.104599 103.031265) + (xy 209.06615 103.224556) (xy 209.06615 103.421643) (xy 209.083727 103.510007) (xy 209.103418 103.609) + (xy 209.104599 103.614934) (xy 209.104599 103.614936) (xy 209.180017 103.797013) (xy 209.180018 103.797014) + (xy 209.289511 103.960882) (xy 209.428868 104.100239) (xy 209.592736 104.209732) (xy 209.774815 104.285151) + (xy 209.839384 104.297994) (xy 209.892767 104.327891) (xy 209.918383 104.383456) (xy 209.906446 104.443465) + (xy 209.861517 104.484998) (xy 209.835557 104.492873) (xy 209.750527 104.506341) (xy 209.548434 104.572004) + (xy 209.359097 104.668475) (xy 209.187185 104.793377) (xy 209.036927 104.943635) (xy 208.912025 105.115547) + (xy 208.815554 105.304884) (xy 208.749891 105.506977) (xy 208.739418 105.573099) (xy 208.739419 105.5731) + (xy 209.787504 105.5731) (xy 209.74902 105.639757) (xy 209.71665 105.760565) (xy 209.71665 105.885635) + (xy 209.74902 106.006443) (xy 209.787504 106.0731) (xy 208.739419 106.0731) (xy 208.749891 106.139222) + (xy 208.815554 106.341315) (xy 208.912025 106.530652) (xy 209.036927 106.702564) (xy 209.187185 106.852822) + (xy 209.359097 106.977724) (xy 209.548436 107.074196) (xy 209.718478 107.129445) (xy 209.767978 107.165409) + (xy 209.786886 107.223599) (xy 209.767979 107.28179) (xy 209.718479 107.317754) (xy 209.687886 107.3226) + (xy 209.435128 107.3226) (xy 209.435126 107.322601) (xy 209.34135 107.337452) (xy 209.341345 107.337454) + (xy 209.228309 107.395049) (xy 209.138599 107.484759) (xy 209.081004 107.597795) (xy 209.06615 107.691578) + (xy 209.06615 108.954621) (xy 209.066151 108.954623) (xy 209.081002 109.048399) (xy 209.081004 109.048404) + (xy 209.1386 109.161442) (xy 209.228308 109.25115) (xy 209.341346 109.308746) (xy 209.435131 109.3236) + (xy 210.948168 109.323599) (xy 210.948171 109.323599) (xy 210.948172 109.323598) (xy 210.995061 109.316172) + (xy 211.041949 109.308747) (xy 211.041949 109.308746) (xy 211.041954 109.308746) (xy 211.154992 109.25115) + (xy 211.2447 109.161442) (xy 211.302296 109.048404) (xy 211.31715 108.954619) (xy 211.317149 107.691582) + (xy 211.317149 107.691581) (xy 211.317149 107.691578) (xy 211.317148 107.691576) (xy 211.302297 107.5978) + (xy 211.302296 107.597798) (xy 211.302296 107.597796) (xy 211.2447 107.484758) (xy 211.154992 107.39505) + (xy 211.041954 107.337454) (xy 211.041955 107.337454) (xy 210.948172 107.3226) (xy 210.695415 107.3226) + (xy 210.637224 107.303693) (xy 210.60126 107.254193) (xy 210.60126 107.193007) (xy 210.637224 107.143507) + (xy 210.664823 107.129445) (xy 210.834863 107.074196) (xy 211.024202 106.977724) (xy 211.196114 106.852822) + (xy 211.346372 106.702564) (xy 211.471274 106.530652) (xy 211.567745 106.341315) (xy 211.633408 106.139222) + (xy 211.643881 106.0731) (xy 210.595796 106.0731) (xy 210.63428 106.006443) (xy 210.66665 105.885635) + (xy 210.66665 105.760565) (xy 210.63428 105.639757) (xy 210.595796 105.5731) (xy 211.643881 105.5731) + (xy 211.643881 105.573099) (xy 211.633408 105.506977) (xy 211.567745 105.304884) (xy 211.471274 105.115547) + (xy 211.346372 104.943635) (xy 211.196114 104.793377) (xy 211.024202 104.668475) (xy 210.834865 104.572004) + (xy 210.632772 104.506341) (xy 210.547742 104.492873) (xy 210.493226 104.465095) (xy 210.465449 104.410578) + (xy 210.475021 104.350146) (xy 210.518286 104.306882) (xy 210.543913 104.297995) (xy 210.608485 104.285151) + (xy 210.790564 104.209732) (xy 210.954432 104.100239) (xy 211.093789 103.960882) (xy 211.203282 103.797014) + (xy 211.278701 103.614935) (xy 211.31715 103.421641) (xy 211.31715 103.224559) (xy 211.278701 103.031265) + (xy 211.203282 102.849186) (xy 211.093789 102.685318) (xy 210.954432 102.545961) (xy 210.790564 102.436468) + (xy 210.790565 102.436468) (xy 210.790563 102.436467) (xy 210.608486 102.361049) (xy 210.56843 102.353081) + (xy 210.521834 102.343812) (xy 210.468452 102.313916) (xy 210.442836 102.258351) (xy 210.44215 102.246715) + (xy 210.44215 102.121571) (xy 210.404014 102.029503) (xy 210.333547 101.959035) (xy 210.333547 101.959036) + (xy 203.444015 95.069504) (xy 203.416238 95.014987) (xy 203.425809 94.954555) (xy 203.469074 94.91129) + (xy 203.514019 94.9005) (xy 204.039546 94.9005) (xy 204.097737 94.919407) (xy 204.10955 94.929496) + (xy 212.120504 102.94045) (xy 212.148281 102.994967) (xy 212.1495 103.010454) (xy 212.1495 110.189546) + (xy 212.130593 110.247737) (xy 212.120504 110.25955) (xy 209.04472 113.335334) (xy 208.973533 113.441875) + (xy 208.924499 113.560254) (xy 208.924499 113.560256) (xy 208.899501 113.685928) (xy 208.899501 113.814071) + (xy 208.924499 113.939743) (xy 208.924499 113.939745) (xy 208.973533 114.058124) (xy 209.032587 114.146507) + (xy 209.044723 114.164669) (xy 209.135331 114.255277) (xy 209.241873 114.326465) (xy 209.360256 114.375501) + (xy 209.485931 114.400499) (xy 209.485932 114.400499) (xy 209.614068 114.400499) (xy 209.614069 114.400499) + (xy 209.739744 114.375501) (xy 209.858127 114.326465) (xy 209.964669 114.255277) (xy 213.305277 110.914669) + (xy 213.376465 110.808127) (xy 213.425501 110.689744) (xy 213.429792 110.668172) (xy 213.4505 110.564069) + (xy 213.4505 102.635931) (xy 213.425501 102.510256) (xy 213.388903 102.4219) (xy 213.376466 102.391874) + (xy 213.305277 102.285331) (xy 204.764669 93.744723) (xy 204.764665 93.74472) (xy 204.658126 93.673534) + (xy 204.539747 93.6245) (xy 204.539745 93.624499) (xy 204.539744 93.624499) (xy 204.414069 93.5995) + (xy 197.62424 93.5995) (xy 197.566049 93.580593) (xy 197.530085 93.531093) (xy 197.530085 93.469907) + (xy 197.54415 93.442305) (xy 197.546601 93.438931) (xy 197.630565 93.274141) (xy 197.687717 93.098243) + (xy 197.69884 93.028022) (xy 197.71665 92.915576) (xy 197.71665 92.730623) (xy 197.69884 92.618178) + (xy 197.6917 92.573099) (xy 208.739418 92.573099) (xy 208.739419 92.5731) (xy 209.787504 92.5731) + (xy 209.74902 92.639757) (xy 209.71665 92.760565) (xy 209.71665 92.885635) (xy 209.74902 93.006443) + (xy 209.787504 93.0731) (xy 208.739419 93.0731) (xy 208.749891 93.139222) (xy 208.815554 93.341315) + (xy 208.912025 93.530652) (xy 209.036927 93.702564) (xy 209.187185 93.852822) (xy 209.359097 93.977724) + (xy 209.548436 94.074196) (xy 209.718478 94.129445) (xy 209.767978 94.165409) (xy 209.786886 94.223599) + (xy 209.767979 94.28179) (xy 209.718479 94.317754) (xy 209.687886 94.3226) (xy 209.435128 94.3226) + (xy 209.435126 94.322601) (xy 209.34135 94.337452) (xy 209.341345 94.337454) (xy 209.228309 94.395049) + (xy 209.138599 94.484759) (xy 209.081004 94.597795) (xy 209.06615 94.691578) (xy 209.06615 95.954621) + (xy 209.066151 95.954623) (xy 209.081002 96.048399) (xy 209.081004 96.048404) (xy 209.1386 96.161442) + (xy 209.228308 96.25115) (xy 209.341346 96.308746) (xy 209.435131 96.3236) (xy 210.948168 96.323599) + (xy 210.948171 96.323599) (xy 210.948172 96.323598) (xy 211.014285 96.313128) (xy 211.041949 96.308747) + (xy 211.041949 96.308746) (xy 211.041954 96.308746) (xy 211.154992 96.25115) (xy 211.2447 96.161442) + (xy 211.302296 96.048404) (xy 211.31715 95.954619) (xy 211.317149 94.691582) (xy 211.317149 94.691581) + (xy 211.317149 94.691578) (xy 211.317148 94.691576) (xy 211.302297 94.5978) (xy 211.302296 94.597798) + (xy 211.302296 94.597796) (xy 211.2447 94.484758) (xy 211.154992 94.39505) (xy 211.041954 94.337454) + (xy 211.041955 94.337454) (xy 210.948172 94.3226) (xy 210.695415 94.3226) (xy 210.637224 94.303693) + (xy 210.60126 94.254193) (xy 210.60126 94.193007) (xy 210.637224 94.143507) (xy 210.664823 94.129445) + (xy 210.834863 94.074196) (xy 211.024202 93.977724) (xy 211.196114 93.852822) (xy 211.346372 93.702564) + (xy 211.471274 93.530652) (xy 211.567745 93.341315) (xy 211.633408 93.139222) (xy 211.643881 93.0731) + (xy 210.595796 93.0731) (xy 210.63428 93.006443) (xy 210.66665 92.885635) (xy 210.66665 92.760565) + (xy 210.63428 92.639757) (xy 210.595796 92.5731) (xy 211.643881 92.5731) (xy 211.643881 92.573099) + (xy 211.633408 92.506977) (xy 211.567745 92.304884) (xy 211.471274 92.115547) (xy 211.346372 91.943635) + (xy 211.196114 91.793377) (xy 211.024202 91.668475) (xy 210.834865 91.572004) (xy 210.632772 91.506341) + (xy 210.547742 91.492873) (xy 210.493226 91.465095) (xy 210.465449 91.410578) (xy 210.475021 91.350146) + (xy 210.518286 91.306882) (xy 210.543913 91.297995) (xy 210.608485 91.285151) (xy 210.790564 91.209732) + (xy 210.954432 91.100239) (xy 211.093789 90.960882) (xy 211.203282 90.797014) (xy 211.278701 90.614935) + (xy 211.31715 90.421641) (xy 211.31715 90.224559) (xy 211.278701 90.031265) (xy 211.203282 89.849186) + (xy 211.093789 89.685318) (xy 210.954432 89.545961) (xy 210.832065 89.464198) (xy 210.790563 89.436467) + (xy 210.608485 89.361049) (xy 210.415193 89.3226) (xy 210.415191 89.3226) (xy 209.968109 89.3226) + (xy 209.968106 89.3226) (xy 209.774815 89.361049) (xy 209.774813 89.361049) (xy 209.592736 89.436467) + (xy 209.428868 89.545961) (xy 209.428864 89.545964) (xy 209.289514 89.685314) (xy 209.289511 89.685318) + (xy 209.180017 89.849186) (xy 209.104599 90.031263) (xy 209.104599 90.031265) (xy 209.06615 90.224556) + (xy 209.06615 90.421643) (xy 209.104599 90.614934) (xy 209.104599 90.614936) (xy 209.180017 90.797013) + (xy 209.199905 90.826777) (xy 209.289511 90.960882) (xy 209.428868 91.100239) (xy 209.592736 91.209732) + (xy 209.774815 91.285151) (xy 209.839384 91.297994) (xy 209.892767 91.327891) (xy 209.918383 91.383456) + (xy 209.906446 91.443465) (xy 209.861517 91.484998) (xy 209.835557 91.492873) (xy 209.750527 91.506341) + (xy 209.548434 91.572004) (xy 209.359097 91.668475) (xy 209.187185 91.793377) (xy 209.036927 91.943635) + (xy 208.912025 92.115547) (xy 208.815554 92.304884) (xy 208.749891 92.506977) (xy 208.739418 92.573099) + (xy 197.6917 92.573099) (xy 197.687717 92.547956) (xy 197.630565 92.372058) (xy 197.546603 92.207272) + (xy 197.546598 92.207264) (xy 197.531634 92.186668) (xy 196.94165 92.776653) (xy 196.94165 92.770439) + (xy 196.914391 92.668706) (xy 196.86173 92.577494) (xy 196.787256 92.50302) (xy 196.696044 92.450359) + (xy 196.594311 92.4231) (xy 196.588094 92.4231) (xy 197.17808 91.833114) (xy 197.157485 91.818151) + (xy 197.157477 91.818146) (xy 196.992693 91.734185) (xy 196.965643 91.725396) (xy 196.916143 91.689432) + (xy 196.897236 91.631241) (xy 196.916143 91.57305) (xy 196.941232 91.548927) (xy 197.067875 91.464308) + (xy 197.182858 91.349325) (xy 197.273198 91.214121) (xy 197.335426 91.063889) (xy 197.36715 90.904405) + (xy 197.36715 90.741795) (xy 197.335426 90.582311) (xy 197.290559 90.473993) (xy 197.273199 90.432081) + (xy 197.266223 90.421641) (xy 197.182858 90.296875) (xy 197.067875 90.181892) (xy 196.932671 90.091552) + (xy 196.93267 90.091551) (xy 196.932668 90.09155) (xy 196.78244 90.029324) (xy 196.622955 89.9976) + (xy 196.460345 89.9976) (xy 196.460344 89.9976) (xy 196.300859 90.029324) (xy 196.150631 90.09155) + (xy 196.015428 90.181889) (xy 195.900439 90.296878) (xy 195.8101 90.432081) (xy 195.747874 90.582309) + (xy 195.71615 90.741794) (xy 195.71615 90.904405) (xy 195.747874 91.06389) (xy 195.8101 91.214118) + (xy 195.8771 91.314392) (xy 195.900442 91.349325) (xy 196.015425 91.464308) (xy 196.107556 91.525868) + (xy 196.142064 91.548925) (xy 196.179944 91.596975) (xy 196.182346 91.658113) (xy 196.148354 91.708987) + (xy 196.117657 91.725395) (xy 196.09061 91.734183) (xy 195.925818 91.818148) (xy 195.905218 91.833114) + (xy 196.495204 92.4231) (xy 196.488989 92.4231) (xy 196.387256 92.450359) (xy 196.296044 92.50302) + (xy 196.22157 92.577494) (xy 196.168909 92.668706) (xy 196.14165 92.770439) (xy 196.14165 92.776654) + (xy 195.551664 92.186668) (xy 195.536698 92.207268) (xy 195.452734 92.372058) (xy 195.395582 92.547956) + (xy 195.36665 92.730622) (xy 195.36665 92.915577) (xy 195.395582 93.098243) (xy 195.452734 93.274141) + (xy 195.536698 93.438931) (xy 195.53915 93.442305) (xy 195.55806 93.500495) (xy 195.539156 93.558687) + (xy 195.489657 93.594653) (xy 195.45906 93.5995) (xy 194.5995 93.5995) (xy 194.541309 93.580593) + (xy 194.505345 93.531093) (xy 194.5005 93.5005) (xy 194.5005 90.785932) (xy 194.5005 90.785931) + (xy 194.475501 90.660256) (xy 194.426465 90.541873) (xy 194.400012 90.502283) (xy 194.355276 90.43533) + (xy 192.464669 88.544723) (xy 192.464665 88.54472) (xy 192.358126 88.473534) (xy 192.239747 88.4245) + (xy 192.239745 88.424499) (xy 192.239744 88.424499) (xy 192.114069 88.3995) (xy 190.835931 88.3995) + (xy 190.83593 88.3995) (xy 190.773093 88.411999) (xy 190.710256 88.424499) (xy 190.710255 88.424499) + (xy 190.710252 88.4245) (xy 190.591874 88.473534) (xy 190.591866 88.473538) (xy 190.485331 88.544724) + (xy 190.485327 88.544727) (xy 190.394727 88.635327) (xy 190.394724 88.635331) (xy 190.323538 88.741866) + (xy 190.323534 88.741874) (xy 190.2745 88.860252) (xy 190.274499 88.860257) (xy 190.250159 88.98262) + (xy 190.2495 88.985931) (xy 190.2495 89.114069) (xy 190.270531 89.219797) (xy 190.274499 89.239742) + (xy 190.2745 89.239747) (xy 190.323534 89.358125) (xy 190.323538 89.358133) (xy 190.342026 89.385801) + (xy 190.394724 89.464669) (xy 190.485331 89.555276) (xy 190.548848 89.597717) (xy 190.591866 89.626461) + (xy 190.59187 89.626463) (xy 190.591873 89.626465) (xy 190.710256 89.675501) (xy 190.835931 89.7005) + (xy 191.739546 89.7005) (xy 191.797737 89.719407) (xy 191.80955 89.729496) (xy 193.170504 91.09045) + (xy 193.198281 91.144967) (xy 193.1995 91.160454) (xy 193.1995 94.314069) (xy 193.215608 94.395049) + (xy 193.224499 94.439742) (xy 193.2245 94.439747) (xy 193.273534 94.558125) (xy 193.273538 94.558133) + (xy 193.309329 94.611697) (xy 193.331915 94.645499) (xy 193.348524 94.704386) (xy 193.327347 94.761789) + (xy 193.276474 94.795783) (xy 193.2496 94.7995) (xy 138.850019 94.7995) (xy 138.791828 94.780593) + (xy 138.780015 94.770504) (xy 138.329015 94.319504) (xy 138.301238 94.264987) (xy 138.310809 94.204555) + (xy 138.354074 94.16129) (xy 138.399019 94.1505) (xy 154.639318 94.1505) (xy 154.639319 94.1505) + (xy 154.764994 94.125501) (xy 154.883377 94.076465) (xy 154.902345 94.063791) (xy 154.989919 94.005277) + (xy 155.220727 93.774469) (xy 155.291915 93.667927) (xy 155.340951 93.549543) (xy 155.36595 93.423869) + (xy 155.36595 93.295731) (xy 155.340951 93.170056) (xy 155.302483 93.077187) (xy 155.291914 93.05167) + (xy 155.220731 92.945135) (xy 155.220729 92.945133) (xy 155.220727 92.94513) (xy 155.208098 92.932501) + (xy 155.180323 92.877987) (xy 155.189894 92.817555) (xy 155.233159 92.77429) (xy 155.278104 92.7635) + (xy 163.875691 92.7635) (xy 163.875692 92.7635) (xy 164.040984 92.730622) (xy 173.01665 92.730622) + (xy 173.01665 92.915577) (xy 173.045582 93.098243) (xy 173.102734 93.274141) (xy 173.186696 93.438927) + (xy 173.186701 93.438935) (xy 173.201664 93.459529) (xy 173.79165 92.869543) (xy 173.79165 92.875761) + (xy 173.818909 92.977494) (xy 173.87157 93.068706) (xy 173.946044 93.14318) (xy 174.037256 93.195841) + (xy 174.138989 93.2231) (xy 174.145202 93.2231) (xy 173.555218 93.813084) (xy 173.575814 93.828048) + (xy 173.575822 93.828053) (xy 173.740608 93.912015) (xy 173.916506 93.969167) (xy 174.099173 93.9981) + (xy 174.284127 93.9981) (xy 174.466793 93.969167) (xy 174.642691 93.912015) (xy 174.807487 93.828047) (xy 174.82808 93.813084) (xy 174.238096 93.2231) (xy 174.244311 93.2231) (xy 174.346044 93.195841) (xy 174.437256 93.14318) (xy 174.51173 93.068706) (xy 174.564391 92.977494) (xy 174.59165 92.875761) (xy 174.59165 92.869546) (xy 175.181634 93.45953) (xy 175.196597 93.438937) (xy 175.280565 93.274141) @@ -46368,941 +52991,1581 @@ (xy 175.280565 92.372058) (xy 175.196603 92.207272) (xy 175.196598 92.207264) (xy 175.181634 92.186668) (xy 174.59165 92.776652) (xy 174.59165 92.770439) (xy 174.564391 92.668706) (xy 174.51173 92.577494) (xy 174.437256 92.50302) (xy 174.346044 92.450359) (xy 174.244311 92.4231) (xy 174.238094 92.4231) - (xy 174.82808 91.833114) (xy 174.807485 91.818151) (xy 174.807477 91.818146) (xy 174.759875 91.793892) - (xy 174.71661 91.750627) (xy 174.707039 91.690195) (xy 174.734816 91.635678) (xy 174.74981 91.623372) - (xy 174.813495 91.58082) (xy 174.94937 91.444945) (xy 175.056127 91.285173) (xy 175.129662 91.107643) - (xy 175.16715 90.919178) (xy 175.16715 90.727022) (xy 175.129662 90.538557) (xy 175.056128 90.361029) - (xy 175.056128 90.361028) (xy 174.94937 90.201255) (xy 174.813494 90.065379) (xy 174.65372 89.958621) - (xy 174.547355 89.914564) (xy 174.500829 89.874828) (xy 174.486545 89.815333) (xy 174.50996 89.758805) - (xy 174.547355 89.731636) (xy 174.584786 89.716131) (xy 174.653723 89.687577) (xy 174.813495 89.58082) - (xy 174.94937 89.444945) (xy 175.056127 89.285173) (xy 175.129662 89.107643) (xy 175.16715 88.919178) - (xy 175.16715 88.727022) (xy 175.129662 88.538557) (xy 175.108016 88.486298) (xy 175.055903 88.360485) - (xy 175.051102 88.299489) (xy 175.083072 88.24732) (xy 175.1396 88.223905) (xy 175.147367 88.2236) - (xy 195.585933 88.2236) (xy 195.644124 88.242507) (xy 195.680088 88.292007) (xy 195.680088 88.353193) - (xy 195.677397 88.360485) (xy 195.603638 88.538555) (xy 195.603638 88.538557) (xy 195.56615 88.727019) - (xy 195.56615 88.91918) (xy 195.603638 89.107642) (xy 195.603638 89.107644) (xy 195.677171 89.28517) - (xy 195.677171 89.285171) (xy 195.783929 89.444944) (xy 195.919805 89.58082) (xy 196.079577 89.687577) - (xy 196.185945 89.731636) (xy 196.23247 89.771373) (xy 196.246754 89.830867) (xy 196.223339 89.887395) - (xy 196.185945 89.914564) (xy 196.079577 89.958622) (xy 195.919805 90.065379) (xy 195.783929 90.201255) - (xy 195.677171 90.361028) (xy 195.677171 90.361029) (xy 195.603638 90.538555) (xy 195.603638 90.538557) - (xy 195.56615 90.727019) (xy 195.56615 90.91918) (xy 195.588833 91.033213) (xy 195.601305 91.095916) - (xy 195.603638 91.107642) (xy 195.603638 91.107644) (xy 195.677171 91.28517) (xy 195.677171 91.285171) - (xy 195.783929 91.444944) (xy 195.919805 91.58082) (xy 196.079577 91.687577) (xy 196.185945 91.731636) - (xy 196.23247 91.771373) (xy 196.246754 91.830867) (xy 196.223339 91.887395) (xy 196.185945 91.914564) - (xy 196.079577 91.958622) (xy 195.919805 92.065379) (xy 195.783929 92.201255) (xy 195.677171 92.361028) - (xy 195.677171 92.361029) (xy 195.603638 92.538555) (xy 195.603638 92.538557) (xy 195.56615 92.727019) - (xy 195.56615 92.91918) (xy 195.603638 93.107642) (xy 195.603638 93.107644) (xy 195.677171 93.28517) - (xy 195.677171 93.285171) (xy 195.783929 93.444944) (xy 195.78393 93.444945) (xy 195.919805 93.58082) - (xy 196.079577 93.687577) (xy 196.257107 93.761112) (xy 196.445572 93.7986) (xy 196.445573 93.7986) - (xy 196.637727 93.7986) (xy 196.637728 93.7986) (xy 196.826193 93.761112) (xy 197.003723 93.687577) - (xy 197.163495 93.58082) (xy 197.29937 93.444945) (xy 197.406127 93.285173) (xy 197.479662 93.107643) - (xy 197.51715 92.919178) (xy 197.51715 92.727022) (xy 197.499792 92.639757) (xy 197.496261 92.622005) - (xy 197.493857 92.609921) (xy 197.486533 92.573099) (xy 208.739418 92.573099) (xy 208.739419 92.5731) - (xy 209.787504 92.5731) (xy 209.74902 92.639757) (xy 209.71665 92.760565) (xy 209.71665 92.885635) - (xy 209.74902 93.006443) (xy 209.787504 93.0731) (xy 208.739419 93.0731) (xy 208.749891 93.139222) - (xy 208.815554 93.341315) (xy 208.912025 93.530652) (xy 209.036927 93.702564) (xy 209.187185 93.852822) - (xy 209.359098 93.977724) (xy 209.391008 93.993983) (xy 209.434273 94.037248) (xy 209.443844 94.09768) - (xy 209.416067 94.152197) (xy 209.36155 94.179974) (xy 209.357869 94.180487) (xy 209.335083 94.183223) - (xy 209.19431 94.238737) (xy 209.194306 94.23874) (xy 209.073731 94.330175) (xy 209.073725 94.330181) - (xy 208.98229 94.450756) (xy 208.982287 94.45076) (xy 208.926773 94.591534) (xy 208.91615 94.679993) - (xy 208.91615 95.966206) (xy 208.926773 96.054665) (xy 208.982287 96.195439) (xy 208.982288 96.195441) - (xy 208.982289 96.195442) (xy 209.073728 96.316022) (xy 209.194308 96.407461) (xy 209.194309 96.407461) - (xy 209.19431 96.407462) (xy 209.264697 96.435219) (xy 209.335086 96.462977) (xy 209.423548 96.4736) - (xy 209.42355 96.4736) (xy 210.95975 96.4736) (xy 210.959752 96.4736) (xy 211.048214 96.462977) - (xy 211.188992 96.407461) (xy 211.309572 96.316022) (xy 211.401011 96.195442) (xy 211.456527 96.054664) - (xy 211.46715 95.966202) (xy 211.46715 94.679998) (xy 211.456527 94.591536) (xy 211.417999 94.493836) - (xy 211.401012 94.45076) (xy 211.401011 94.450759) (xy 211.401011 94.450758) (xy 211.309572 94.330178) - (xy 211.188992 94.238739) (xy 211.188991 94.238738) (xy 211.188989 94.238737) (xy 211.048216 94.183223) - (xy 211.025431 94.180487) (xy 210.96991 94.154775) (xy 210.940105 94.10134) (xy 210.947401 94.040591) - (xy 210.989011 93.995733) (xy 210.992292 93.993983) (xy 211.024199 93.977725) (xy 211.0242 93.977725) - (xy 211.196114 93.852822) (xy 211.346372 93.702564) (xy 211.471274 93.530652) (xy 211.567745 93.341315) - (xy 211.633408 93.139222) (xy 211.643881 93.0731) (xy 210.595796 93.0731) (xy 210.63428 93.006443) - (xy 210.66665 92.885635) (xy 210.66665 92.760565) (xy 210.63428 92.639757) (xy 210.595796 92.5731) - (xy 211.643881 92.5731) (xy 211.643881 92.573099) (xy 211.633408 92.506977) (xy 211.567745 92.304884) - (xy 211.471274 92.115547) (xy 211.346372 91.943635) (xy 211.196114 91.793377) (xy 211.024202 91.668475) - (xy 210.834859 91.572001) (xy 210.796476 91.55953) (xy 210.746976 91.523566) (xy 210.728069 91.465376) - (xy 210.746977 91.407185) (xy 210.782122 91.377166) (xy 210.919644 91.307096) (xy 211.066151 91.200653) - (xy 211.194203 91.072601) (xy 211.300646 90.926094) (xy 211.382861 90.764739) (xy 211.438821 90.592509) - (xy 211.46715 90.413646) (xy 211.46715 90.232554) (xy 211.46715 90.23255) (xy 211.440672 90.065379) - (xy 211.438821 90.053691) (xy 211.382861 89.881461) (xy 211.300646 89.720106) (xy 211.194203 89.573599) - (xy 211.066151 89.445547) (xy 210.919644 89.339104) (xy 210.919643 89.339103) (xy 210.919641 89.339102) - (xy 210.758287 89.256888) (xy 210.586056 89.200928) (xy 210.407199 89.1726) (xy 210.407196 89.1726) - (xy 209.976104 89.1726) (xy 209.976101 89.1726) (xy 209.797243 89.200928) (xy 209.625012 89.256888) - (xy 209.463658 89.339102) (xy 209.390851 89.392) (xy 209.317149 89.445547) (xy 209.189097 89.573599) - (xy 209.135875 89.646852) (xy 209.082652 89.720108) (xy 209.000438 89.881462) (xy 208.944478 90.053693) - (xy 208.91615 90.23255) (xy 208.91615 90.413649) (xy 208.944478 90.592506) (xy 209.000438 90.764737) - (xy 209.054114 90.870083) (xy 209.082654 90.926094) (xy 209.189097 91.072601) (xy 209.317149 91.200653) - (xy 209.463656 91.307096) (xy 209.463658 91.307097) (xy 209.601175 91.377166) (xy 209.64444 91.420431) - (xy 209.654011 91.480863) (xy 209.626233 91.53538) (xy 209.586824 91.55953) (xy 209.548438 91.572002) - (xy 209.359097 91.668475) (xy 209.187185 91.793377) (xy 209.036927 91.943635) (xy 208.912025 92.115547) - (xy 208.815554 92.304884) (xy 208.749891 92.506977) (xy 208.739418 92.573099) (xy 197.486533 92.573099) - (xy 197.479662 92.538557) (xy 197.435486 92.431907) (xy 197.406128 92.361029) (xy 197.406128 92.361028) - (xy 197.29937 92.201255) (xy 197.163494 92.065379) (xy 197.00372 91.958621) (xy 196.897355 91.914564) - (xy 196.850829 91.874828) (xy 196.836545 91.815333) (xy 196.85996 91.758805) (xy 196.897355 91.731636) - (xy 196.934786 91.716131) (xy 197.003723 91.687577) (xy 197.163495 91.58082) (xy 197.29937 91.444945) - (xy 197.406127 91.285173) (xy 197.479662 91.107643) (xy 197.51715 90.919178) (xy 197.51715 90.727022) - (xy 197.479662 90.538557) (xy 197.406128 90.361029) (xy 197.406128 90.361028) (xy 197.29937 90.201255) - (xy 197.163494 90.065379) (xy 197.00372 89.958621) (xy 196.897355 89.914564) (xy 196.850829 89.874828) - (xy 196.836545 89.815333) (xy 196.85996 89.758805) (xy 196.897355 89.731636) (xy 196.934786 89.716131) - (xy 197.003723 89.687577) (xy 197.163495 89.58082) (xy 197.29937 89.444945) (xy 197.406127 89.285173) - (xy 197.479662 89.107643) (xy 197.51715 88.919178) (xy 197.51715 88.727022) (xy 197.479662 88.538557) - (xy 197.458016 88.486298) (xy 197.405903 88.360485) (xy 197.401102 88.299489) (xy 197.433072 88.24732) - (xy 197.4896 88.223905) (xy 197.497367 88.2236) (xy 208.918811 88.2236) (xy 208.977002 88.242507) - (xy 209.007018 88.277652) (xy 209.057166 88.376073) (xy 209.080873 88.4226) (xy 209.082654 88.426094) - (xy 209.189097 88.572601) (xy 209.317149 88.700653) (xy 209.463656 88.807096) (xy 209.625011 88.889311) - (xy 209.797241 88.945271) (xy 209.868786 88.956602) (xy 209.976101 88.9736) (xy 209.976104 88.9736) - (xy 210.407199 88.9736) (xy 210.496627 88.959435) (xy 210.586059 88.945271) (xy 210.758289 88.889311) - (xy 210.919644 88.807096) (xy 211.066151 88.700653) (xy 211.194203 88.572601) (xy 211.300646 88.426094) - (xy 211.382861 88.264739) (xy 211.438821 88.092509) (xy 211.46715 87.913646) (xy 211.46715 87.732554) - (xy 211.46715 87.73255) (xy 211.438821 87.553693) (xy 211.438821 87.553691) (xy 211.382861 87.381461) - (xy 211.300646 87.220106) (xy 211.194203 87.073599) (xy 211.066151 86.945547) (xy 210.919644 86.839104) - (xy 210.919643 86.839103) (xy 210.919641 86.839102) (xy 210.758287 86.756888) (xy 210.586056 86.700928) - (xy 210.407199 86.6726) (xy 210.407196 86.6726) (xy 209.976104 86.6726) (xy 209.976101 86.6726) - (xy 209.797243 86.700928) (xy 209.625012 86.756888) (xy 209.463658 86.839102) (xy 209.390402 86.892325) - (xy 209.317149 86.945547) (xy 209.189097 87.073599) (xy 209.164363 87.107643) (xy 209.082652 87.220108) - (xy 209.0495 87.285173) (xy 209.007019 87.368546) (xy 208.963756 87.41181) (xy 208.918811 87.4226) - (xy 197.497367 87.4226) (xy 197.439176 87.403693) (xy 197.403212 87.354193) (xy 197.403212 87.293007) - (xy 197.405903 87.285715) (xy 197.439968 87.203473) (xy 197.479662 87.107643) (xy 197.51715 86.919178) - (xy 197.51715 86.727022) (xy 197.479662 86.538557) (xy 197.406128 86.361029) (xy 197.406128 86.361028) - (xy 197.29937 86.201255) (xy 197.163494 86.065379) (xy 197.00372 85.958621) (xy 196.897355 85.914564) - (xy 196.850829 85.874828) (xy 196.836545 85.815333) (xy 196.85996 85.758805) (xy 196.897355 85.731636) - (xy 196.934786 85.716131) (xy 197.003723 85.687577) (xy 197.163495 85.58082) (xy 197.29937 85.444945) - (xy 197.406127 85.285173) (xy 197.479662 85.107643) (xy 197.51715 84.919178) (xy 197.51715 84.727022) - (xy 197.479662 84.538557) (xy 197.406128 84.361029) (xy 197.406128 84.361028) (xy 197.29937 84.201255) - (xy 197.163494 84.065379) (xy 197.00372 83.958621) (xy 196.897355 83.914564) (xy 196.850829 83.874828) - (xy 196.836545 83.815333) (xy 196.85996 83.758805) (xy 196.897355 83.731636) (xy 196.934786 83.716131) - (xy 197.003723 83.687577) (xy 197.163495 83.58082) (xy 197.29937 83.444945) (xy 197.406127 83.285173) - (xy 197.479662 83.107643) (xy 197.51715 82.919178) (xy 197.51715 82.727022) (xy 197.479662 82.538557) - (xy 197.432125 82.423793) (xy 197.406128 82.361029) (xy 197.406128 82.361028) (xy 197.29937 82.201255) - (xy 197.163494 82.065379) (xy 197.00372 81.958621) (xy 196.897355 81.914564) (xy 196.850829 81.874828) - (xy 196.836545 81.815333) (xy 196.85996 81.758805) (xy 196.897355 81.731636) (xy 196.952138 81.708944) - (xy 197.003723 81.687577) (xy 197.163495 81.58082) (xy 197.29937 81.444945) (xy 197.406127 81.285173) - (xy 197.479662 81.107643) (xy 197.51715 80.919178) (xy 197.51715 80.727022) (xy 197.479662 80.538557) - (xy 197.406128 80.361029) (xy 197.406128 80.361028) (xy 197.29937 80.201255) (xy 197.163494 80.065379) - (xy 197.00372 79.958621) (xy 196.897355 79.914564) (xy 196.850829 79.874828) (xy 196.836545 79.815333) - (xy 196.85996 79.758805) (xy 196.897355 79.731636) (xy 196.934786 79.716131) (xy 197.003723 79.687577) - (xy 197.163495 79.58082) (xy 197.29937 79.444945) (xy 197.406127 79.285173) (xy 197.479662 79.107643) - (xy 197.51715 78.919178) (xy 197.51715 78.727022) (xy 197.479662 78.538557) (xy 197.438016 78.438015) - (xy 197.406128 78.361029) (xy 197.406128 78.361028) (xy 197.29937 78.201255) (xy 197.163494 78.065379) - (xy 197.00372 77.958621) (xy 196.897355 77.914564) (xy 196.879729 77.89951) (xy 196.859959 77.887395) - (xy 196.856902 77.880014) (xy 196.850829 77.874828) (xy 196.845417 77.852286) (xy 196.836545 77.830867) - (xy 196.838409 77.8231) (xy 196.836545 77.815333) (xy 196.845416 77.793915) (xy 196.850829 77.771372) - (xy 196.856903 77.766184) (xy 196.85996 77.758805) (xy 196.897355 77.731636) (xy 196.968795 77.702045) - (xy 196.990821 77.69292) (xy 197.003723 77.687577) (xy 197.163495 77.58082) (xy 197.29937 77.444945) - (xy 197.380785 77.323099) (xy 208.689418 77.323099) (xy 208.689419 77.3231) (xy 209.733638 77.3231) - (xy 209.700725 77.380107) (xy 209.66665 77.507274) (xy 209.66665 77.638926) (xy 209.700725 77.766093) - (xy 209.733638 77.8231) (xy 208.689419 77.8231) (xy 208.699891 77.889222) (xy 208.765554 78.091315) - (xy 208.862025 78.280652) (xy 208.986927 78.452564) (xy 209.137185 78.602822) (xy 209.309098 78.727724) - (xy 209.341008 78.743983) (xy 209.384273 78.787248) (xy 209.393844 78.84768) (xy 209.366067 78.902197) - (xy 209.31155 78.929974) (xy 209.307869 78.930487) (xy 209.285083 78.933223) (xy 209.14431 78.988737) - (xy 209.144306 78.98874) (xy 209.023731 79.080175) (xy 209.023725 79.080181) (xy 208.93229 79.200756) - (xy 208.932287 79.20076) (xy 208.876773 79.341534) (xy 208.86615 79.429993) (xy 208.86615 80.716206) - (xy 208.876773 80.804665) (xy 208.932287 80.945439) (xy 208.932288 80.945441) (xy 208.932289 80.945442) - (xy 209.023728 81.066022) (xy 209.144308 81.157461) (xy 209.144309 81.157461) (xy 209.14431 81.157462) - (xy 209.214697 81.185219) (xy 209.285086 81.212977) (xy 209.373548 81.2236) (xy 209.37355 81.2236) - (xy 210.95975 81.2236) (xy 210.959752 81.2236) (xy 211.048214 81.212977) (xy 211.188992 81.157461) - (xy 211.309572 81.066022) (xy 211.401011 80.945442) (xy 211.456527 80.804664) (xy 211.46715 80.716202) - (xy 211.46715 79.429998) (xy 211.456527 79.341536) (xy 211.401011 79.200758) (xy 211.309572 79.080178) - (xy 211.188992 78.988739) (xy 211.188991 78.988738) (xy 211.188989 78.988737) (xy 211.048216 78.933223) - (xy 211.025431 78.930487) (xy 210.96991 78.904775) (xy 210.940105 78.85134) (xy 210.947401 78.790591) - (xy 210.989011 78.745733) (xy 210.992292 78.743983) (xy 211.024199 78.727725) (xy 211.0242 78.727725) - (xy 211.196114 78.602822) (xy 211.346372 78.452564) (xy 211.471274 78.280652) (xy 211.567745 78.091315) - (xy 211.633408 77.889222) (xy 211.643881 77.8231) (xy 210.599662 77.8231) (xy 210.632575 77.766093) - (xy 210.66665 77.638926) (xy 210.66665 77.507274) (xy 210.632575 77.380107) (xy 210.599662 77.3231) - (xy 211.643881 77.3231) (xy 211.643881 77.323099) (xy 211.633408 77.256977) (xy 211.567745 77.054884) - (xy 211.471274 76.865547) (xy 211.346372 76.693635) (xy 211.196114 76.543377) (xy 211.024202 76.418475) - (xy 210.834865 76.322004) (xy 210.632771 76.25634) (xy 210.4229 76.2231) (xy 210.416651 76.2231) - (xy 210.41665 76.223101) (xy 210.41665 77.140088) (xy 210.359643 77.107175) (xy 210.232476 77.0731) - (xy 210.100824 77.0731) (xy 209.973657 77.107175) (xy 209.91665 77.140088) (xy 209.91665 76.223101) - (xy 209.916649 76.2231) (xy 209.9104 76.2231) (xy 209.700528 76.25634) (xy 209.498434 76.322004) - (xy 209.309097 76.418475) (xy 209.137185 76.543377) (xy 208.986927 76.693635) (xy 208.862025 76.865547) - (xy 208.765554 77.054884) (xy 208.699891 77.256977) (xy 208.689418 77.323099) (xy 197.380785 77.323099) - (xy 197.406127 77.285173) (xy 197.479662 77.107643) (xy 197.51715 76.919178) (xy 197.51715 76.727022) - (xy 197.479662 76.538557) (xy 197.407727 76.36489) (xy 197.406128 76.361029) (xy 197.406128 76.361028) - (xy 197.29937 76.201255) (xy 197.163494 76.065379) (xy 197.035587 75.979914) (xy 196.997708 75.931864) - (xy 196.995306 75.870726) (xy 197.029299 75.819852) (xy 197.086703 75.798675) (xy 197.090582 75.798599) - (xy 197.261514 75.798599) (xy 197.286641 75.795685) (xy 197.389415 75.750306) (xy 197.468856 75.670865) - (xy 197.514235 75.568091) (xy 197.51715 75.542965) (xy 197.517149 74.103236) (xy 197.514235 74.078109) - (xy 197.468856 73.975335) (xy 197.389415 73.895894) (xy 197.286641 73.850515) (xy 197.28664 73.850514) - (xy 197.286638 73.850514) (xy 197.261518 73.8476) (xy 195.821789 73.8476) (xy 195.821786 73.847601) - (xy 195.796659 73.850514) (xy 195.693885 73.895894) (xy 195.614444 73.975335) (xy 195.569064 74.078111) - (xy 195.56615 74.10323) (xy 195.56615 75.54296) (xy 195.566151 75.542963) (xy 195.569064 75.56809) - (xy 195.594406 75.625485) (xy 195.614444 75.670865) (xy 195.693885 75.750306) (xy 195.796659 75.795685) - (xy 195.821785 75.7986) (xy 195.99271 75.798599) (xy 196.050899 75.817506) (xy 196.086863 75.867006) - (xy 196.086864 75.928191) (xy 196.0509 75.977691) (xy 196.047711 75.979914) (xy 195.919805 76.065379) - (xy 195.783929 76.201255) (xy 195.677171 76.361028) (xy 195.677171 76.361029) (xy 195.603638 76.538555) - (xy 195.603638 76.538557) (xy 195.56615 76.727019) (xy 195.56615 76.91918) (xy 195.603638 77.107642) - (xy 195.603638 77.107644) (xy 195.677171 77.28517) (xy 195.677171 77.285171) (xy 195.783929 77.444944) - (xy 195.919805 77.58082) (xy 196.079577 77.687577) (xy 196.185945 77.731636) (xy 196.23247 77.771373) - (xy 196.246754 77.830867) (xy 196.223339 77.887395) (xy 196.185945 77.914564) (xy 196.079577 77.958622) - (xy 195.919805 78.065379) (xy 195.783929 78.201255) (xy 195.677171 78.361028) (xy 195.677171 78.361029) - (xy 195.603638 78.538555) (xy 195.603638 78.538557) (xy 195.56615 78.727019) (xy 195.56615 78.91918) - (xy 195.579987 78.98874) (xy 195.598175 79.080181) (xy 195.603638 79.107642) (xy 195.603638 79.107644) - (xy 195.677171 79.28517) (xy 195.677171 79.285171) (xy 195.783929 79.444944) (xy 195.919805 79.58082) - (xy 196.079577 79.687577) (xy 196.185945 79.731636) (xy 196.23247 79.771373) (xy 196.246754 79.830867) - (xy 196.223339 79.887395) (xy 196.185945 79.914564) (xy 196.079577 79.958622) (xy 195.919805 80.065379) - (xy 195.783929 80.201255) (xy 195.677171 80.361028) (xy 195.677171 80.361029) (xy 195.603638 80.538555) - (xy 195.603638 80.538557) (xy 195.56615 80.727019) (xy 195.56615 80.91918) (xy 195.591142 81.044821) - (xy 195.595359 81.066024) (xy 195.603638 81.107642) (xy 195.603638 81.107644) (xy 195.677171 81.28517) - (xy 195.677171 81.285171) (xy 195.783929 81.444944) (xy 195.919805 81.58082) (xy 196.079577 81.687577) - (xy 196.185945 81.731636) (xy 196.23247 81.771373) (xy 196.246754 81.830867) (xy 196.223339 81.887395) - (xy 196.185945 81.914564) (xy 196.079577 81.958622) (xy 195.919805 82.065379) (xy 195.783929 82.201255) - (xy 195.677171 82.361028) (xy 195.677171 82.361029) (xy 195.603638 82.538555) (xy 195.603638 82.538557) - (xy 195.56615 82.727019) (xy 195.56615 82.91918) (xy 195.603638 83.107642) (xy 195.603638 83.107644) - (xy 195.677171 83.28517) (xy 195.677171 83.285171) (xy 195.783929 83.444944) (xy 195.919805 83.58082) - (xy 196.079577 83.687577) (xy 196.185945 83.731636) (xy 196.23247 83.771373) (xy 196.246754 83.830867) - (xy 196.223339 83.887395) (xy 196.185945 83.914564) (xy 196.079577 83.958622) (xy 195.919805 84.065379) - (xy 195.783929 84.201255) (xy 195.677171 84.361028) (xy 195.677171 84.361029) (xy 195.603638 84.538555) - (xy 195.603638 84.538557) (xy 195.56615 84.727019) (xy 195.56615 84.91918) (xy 195.603638 85.107642) - (xy 195.603638 85.107644) (xy 195.677171 85.28517) (xy 195.677171 85.285171) (xy 195.783929 85.444944) - (xy 195.919805 85.58082) (xy 196.079577 85.687577) (xy 196.185945 85.731636) (xy 196.23247 85.771373) - (xy 196.246754 85.830867) (xy 196.223339 85.887395) (xy 196.185945 85.914564) (xy 196.079577 85.958622) - (xy 195.919805 86.065379) (xy 195.783929 86.201255) (xy 195.677171 86.361028) (xy 195.677171 86.361029) - (xy 195.603638 86.538555) (xy 195.603638 86.538557) (xy 195.56615 86.727019) (xy 195.56615 86.91918) - (xy 195.603638 87.107642) (xy 195.603638 87.107644) (xy 195.677397 87.285715) (xy 195.682198 87.346711) - (xy 195.650228 87.39888) (xy 195.5937 87.422295) (xy 195.585933 87.4226) (xy 175.147367 87.4226) - (xy 175.089176 87.403693) (xy 175.053212 87.354193) (xy 175.053212 87.293007) (xy 175.055903 87.285715) - (xy 175.089968 87.203473) (xy 175.129662 87.107643) (xy 175.16715 86.919178) (xy 175.16715 86.727022) - (xy 175.129662 86.538557) (xy 175.056128 86.361029) (xy 175.056128 86.361028) (xy 174.94937 86.201255) - (xy 174.813494 86.065379) (xy 174.65372 85.958621) (xy 174.547355 85.914564) (xy 174.500829 85.874828) - (xy 174.486545 85.815333) (xy 174.50996 85.758805) (xy 174.547355 85.731636) (xy 174.584786 85.716131) - (xy 174.653723 85.687577) (xy 174.813495 85.58082) (xy 174.94937 85.444945) (xy 175.056127 85.285173) - (xy 175.129662 85.107643) (xy 175.16715 84.919178) (xy 175.16715 84.727022) (xy 175.129662 84.538557) - (xy 175.056128 84.361029) (xy 175.056128 84.361028) (xy 174.94937 84.201255) (xy 174.813494 84.065379) - (xy 174.65372 83.958621) (xy 174.547355 83.914564) (xy 174.500829 83.874828) (xy 174.486545 83.815333) - (xy 174.50996 83.758805) (xy 174.547355 83.731636) (xy 174.584786 83.716131) (xy 174.653723 83.687577) - (xy 174.813495 83.58082) (xy 174.94937 83.444945) (xy 175.056127 83.285173) (xy 175.129662 83.107643) - (xy 175.16715 82.919178) (xy 175.16715 82.727022) (xy 175.129662 82.538557) (xy 175.082125 82.423793) - (xy 175.056128 82.361029) (xy 175.056128 82.361028) (xy 174.94937 82.201255) (xy 174.813494 82.065379) - (xy 174.65372 81.958621) (xy 174.547355 81.914564) (xy 174.500829 81.874828) (xy 174.486545 81.815333) - (xy 174.50996 81.758805) (xy 174.547355 81.731636) (xy 174.602138 81.708944) (xy 174.653723 81.687577) - (xy 174.813495 81.58082) (xy 174.94937 81.444945) (xy 175.056127 81.285173) (xy 175.129662 81.107643) - (xy 175.16715 80.919178) (xy 175.16715 80.727022) (xy 175.129662 80.538557) (xy 175.056128 80.361029) - (xy 175.056128 80.361028) (xy 174.94937 80.201255) (xy 174.813494 80.065379) (xy 174.65372 79.958621) - (xy 174.547355 79.914564) (xy 174.500829 79.874828) (xy 174.486545 79.815333) (xy 174.50996 79.758805) - (xy 174.547355 79.731636) (xy 174.584786 79.716131) (xy 174.653723 79.687577) (xy 174.813495 79.58082) - (xy 174.94937 79.444945) (xy 175.056127 79.285173) (xy 175.129662 79.107643) (xy 175.16715 78.919178) - (xy 175.16715 78.727022) (xy 175.129662 78.538557) (xy 175.088016 78.438015) (xy 175.056128 78.361029) - (xy 175.056128 78.361028) (xy 174.94937 78.201255) (xy 174.813494 78.065379) (xy 174.65372 77.958621) - (xy 174.547355 77.914564) (xy 174.500829 77.874828) (xy 174.486545 77.815333) (xy 174.50996 77.758805) - (xy 174.547355 77.731636) (xy 174.622321 77.700584) (xy 174.653723 77.687577) (xy 174.813495 77.58082) - (xy 174.94937 77.444945) (xy 175.056127 77.285173) (xy 175.129662 77.107643) (xy 175.16715 76.919178) - (xy 175.16715 76.727022) (xy 175.129662 76.538557) (xy 175.057727 76.36489) (xy 175.056128 76.361029) - (xy 175.056128 76.361028) (xy 174.94937 76.201255) (xy 174.813494 76.065379) (xy 174.685587 75.979914) - (xy 174.647708 75.931864) (xy 174.645306 75.870726) (xy 174.679299 75.819852) (xy 174.736703 75.798675) - (xy 174.740582 75.798599) (xy 174.911514 75.798599) (xy 174.936641 75.795685) (xy 175.039415 75.750306) - (xy 175.118856 75.670865) (xy 175.164235 75.568091) (xy 175.16715 75.542965) (xy 175.167149 74.103236) - (xy 175.164235 74.078109) (xy 175.118856 73.975335) (xy 175.039415 73.895894) (xy 174.936641 73.850515) - (xy 174.93664 73.850514) (xy 174.936638 73.850514) (xy 174.911518 73.8476) (xy 173.471789 73.8476) - (xy 173.471786 73.847601) (xy 173.446659 73.850514) (xy 173.343885 73.895894) (xy 173.264444 73.975335) - (xy 173.219064 74.078111) (xy 173.21615 74.10323) (xy 173.21615 75.54296) (xy 173.216151 75.542963) - (xy 173.219064 75.56809) (xy 173.244406 75.625485) (xy 173.264444 75.670865) (xy 173.343885 75.750306) - (xy 173.446659 75.795685) (xy 173.471785 75.7986) (xy 173.64271 75.798599) (xy 173.700899 75.817506) - (xy 173.736863 75.867006) (xy 173.736864 75.928191) (xy 173.7009 75.977691) (xy 173.697711 75.979914) - (xy 173.569805 76.065379) (xy 173.433929 76.201255) (xy 173.327172 76.361028) (xy 173.326984 76.361483) - (xy 173.326837 76.361654) (xy 173.324878 76.36532) (xy 173.324074 76.36489) (xy 173.287249 76.40801) - (xy 173.235519 76.4226) (xy 166.620014 76.4226) (xy 166.561823 76.403693) (xy 166.525859 76.354193) - (xy 166.525859 76.293007) (xy 166.534274 76.274105) (xy 166.599527 76.161084) (xy 166.64045 76.008357) - (xy 166.64045 75.927662) (xy 166.659357 75.869471) (xy 166.708857 75.833507) (xy 166.713793 75.832045) - (xy 166.758834 75.819977) (xy 166.895766 75.74092) (xy 167.00757 75.629116) (xy 167.086627 75.492184) - (xy 167.12755 75.339457) (xy 167.12755 75.181343) (xy 167.086627 75.028616) (xy 167.00757 74.891684) - (xy 166.895766 74.77988) (xy 166.758834 74.700823) (xy 166.606107 74.6599) (xy 166.447993 74.6599) - (xy 166.295266 74.700823) (xy 166.158334 74.77988) (xy 166.04653 74.891684) (xy 165.967473 75.028616) - (xy 165.929546 75.170164) (xy 165.92655 75.181344) (xy 165.92655 75.262036) (xy 165.907643 75.320227) - (xy 165.858143 75.356191) (xy 165.853175 75.357662) (xy 165.808168 75.369722) (xy 165.808166 75.369722) - (xy 165.808166 75.369723) (xy 165.677285 75.445287) (xy 165.671231 75.448782) (xy 165.620209 75.499804) - (xy 165.565692 75.527581) (xy 165.550206 75.5288) (xy 153.49955 75.5288) (xy 153.441359 75.509893) - (xy 153.405395 75.460393) (xy 153.405395 75.399207) (xy 153.441359 75.349707) (xy 153.454605 75.34159) - (xy 153.619206 75.25772) (xy 153.673366 75.21837) (xy 153.041058 74.586062) (xy 153.104643 74.569025) - (xy 153.218657 74.503199) (xy 153.311749 74.410107) (xy 153.377575 74.296093) (xy 153.394612 74.232508) - (xy 154.02692 74.864816) (xy 154.06627 74.810656) (xy 154.162746 74.621313) (xy 154.192377 74.530116) - (xy 154.22834 74.480616) (xy 154.286531 74.461708) (xy 154.344722 74.480615) (xy 154.380686 74.530113) - (xy 154.385438 74.544737) (xy 154.429669 74.631546) (xy 154.467654 74.706094) (xy 154.574097 74.852601) - (xy 154.702149 74.980653) (xy 154.848656 75.087096) (xy 155.010011 75.169311) (xy 155.182241 75.225271) - (xy 155.253786 75.236602) (xy 155.361101 75.2536) (xy 155.361104 75.2536) (xy 155.542199 75.2536) - (xy 155.631627 75.239435) (xy 155.721059 75.225271) (xy 155.893289 75.169311) (xy 156.054644 75.087096) - (xy 156.201151 74.980653) (xy 156.329203 74.852601) (xy 156.435646 74.706094) (xy 156.517861 74.544739) - (xy 156.573821 74.372509) (xy 156.60215 74.193646) (xy 156.60215 74.012554) (xy 156.60215 74.01255) - (xy 156.581396 73.881516) (xy 156.573821 73.833691) (xy 156.517861 73.661461) (xy 156.435646 73.500106) - (xy 156.329203 73.353599) (xy 156.201151 73.225547) (xy 156.092201 73.146391) (xy 156.056239 73.096893) - (xy 156.056239 73.035707) (xy 156.092203 72.986207) (xy 156.150394 72.9673) (xy 170.656075 72.9673) - (xy 170.656077 72.9673) (xy 170.757938 72.940007) (xy 170.75794 72.940005) (xy 170.757942 72.940005) - (xy 170.849258 72.887283) (xy 170.849258 72.887282) (xy 170.849263 72.88728) (xy 173.55655 70.179993) - (xy 208.86615 70.179993) (xy 208.86615 71.466206) (xy 208.876773 71.554665) (xy 208.932287 71.695439) - (xy 208.932288 71.695441) (xy 208.932289 71.695442) (xy 209.023728 71.816022) (xy 209.144308 71.907461) - (xy 209.144309 71.907461) (xy 209.14431 71.907462) (xy 209.213675 71.934816) (xy 209.285086 71.962977) - (xy 209.373548 71.9736) (xy 209.37355 71.9736) (xy 210.95975 71.9736) (xy 210.959752 71.9736) (xy 211.048214 71.962977) - (xy 211.188992 71.907461) (xy 211.309572 71.816022) (xy 211.401011 71.695442) (xy 211.456527 71.554664) - (xy 211.46715 71.466202) (xy 211.46715 70.179998) (xy 211.456527 70.091536) (xy 211.401011 69.950758) - (xy 211.309572 69.830178) (xy 211.188992 69.738739) (xy 211.188991 69.738738) (xy 211.188989 69.738737) - (xy 211.048215 69.683223) (xy 210.959756 69.6726) (xy 210.959752 69.6726) (xy 209.373548 69.6726) - (xy 209.373543 69.6726) (xy 209.285084 69.683223) (xy 209.14431 69.738737) (xy 209.144306 69.73874) - (xy 209.023731 69.830175) (xy 209.023725 69.830181) (xy 208.93229 69.950756) (xy 208.932287 69.95076) - (xy 208.876773 70.091534) (xy 208.86615 70.179993) (xy 173.55655 70.179993) (xy 175.503993 68.23255) - (xy 208.86615 68.23255) (xy 208.86615 68.413649) (xy 208.894478 68.592506) (xy 208.926433 68.690857) - (xy 208.950439 68.764739) (xy 209.032654 68.926094) (xy 209.139097 69.072601) (xy 209.267149 69.200653) - (xy 209.413656 69.307096) (xy 209.575011 69.389311) (xy 209.747241 69.445271) (xy 209.818786 69.456602) - (xy 209.926101 69.4736) (xy 209.926104 69.4736) (xy 210.407199 69.4736) (xy 210.496627 69.459435) - (xy 210.586059 69.445271) (xy 210.758289 69.389311) (xy 210.919644 69.307096) (xy 211.066151 69.200653) - (xy 211.194203 69.072601) (xy 211.300646 68.926094) (xy 211.382861 68.764739) (xy 211.438821 68.592509) - (xy 211.46715 68.413646) (xy 211.46715 68.232554) (xy 211.46715 68.23255) (xy 211.443258 68.081707) - (xy 211.438821 68.053691) (xy 211.382861 67.881461) (xy 211.300646 67.720106) (xy 211.194203 67.573599) - (xy 211.066151 67.445547) (xy 210.919644 67.339104) (xy 210.919643 67.339103) (xy 210.919641 67.339102) - (xy 210.758287 67.256888) (xy 210.586056 67.200928) (xy 210.407199 67.1726) (xy 210.407196 67.1726) - (xy 209.926104 67.1726) (xy 209.926101 67.1726) (xy 209.747243 67.200928) (xy 209.575012 67.256888) - (xy 209.413658 67.339102) (xy 209.340402 67.392325) (xy 209.267149 67.445547) (xy 209.139097 67.573599) - (xy 209.085875 67.646852) (xy 209.032652 67.720108) (xy 208.950438 67.881462) (xy 208.894478 68.053693) - (xy 208.86615 68.23255) (xy 175.503993 68.23255) (xy 177.813299 65.923244) (xy 187.98365 65.923244) - (xy 187.98365 66.127955) (xy 188.015671 66.330129) (xy 188.07893 66.524819) (xy 188.171862 66.707209) - (xy 188.171864 66.707213) (xy 188.292179 66.872813) (xy 188.292181 66.872815) (xy 188.292184 66.872819) - (xy 188.436931 67.017566) (xy 188.436934 67.017568) (xy 188.436936 67.01757) (xy 188.602536 67.137885) - (xy 188.60254 67.137887) (xy 188.784931 67.23082) (xy 188.979616 67.294077) (xy 188.979617 67.294077) - (xy 188.97962 67.294078) (xy 189.181795 67.3261) (xy 189.181798 67.3261) (xy 189.386505 67.3261) - (xy 189.588679 67.294078) (xy 189.58868 67.294077) (xy 189.588684 67.294077) (xy 189.783369 67.23082) - (xy 189.96576 67.137887) (xy 190.131369 67.017566) (xy 190.276116 66.872819) (xy 190.396437 66.70721) - (xy 190.48937 66.524819) (xy 190.552627 66.330134) (xy 190.552628 66.330129) (xy 190.58465 66.127955) - (xy 190.58465 65.923244) (xy 193.06365 65.923244) (xy 193.06365 66.127955) (xy 193.095671 66.330129) - (xy 193.15893 66.524819) (xy 193.251862 66.707209) (xy 193.251864 66.707213) (xy 193.372179 66.872813) - (xy 193.372181 66.872815) (xy 193.372184 66.872819) (xy 193.516931 67.017566) (xy 193.516934 67.017568) - (xy 193.516936 67.01757) (xy 193.682536 67.137885) (xy 193.68254 67.137887) (xy 193.864931 67.23082) - (xy 194.059616 67.294077) (xy 194.059617 67.294077) (xy 194.05962 67.294078) (xy 194.261795 67.3261) - (xy 194.261798 67.3261) (xy 194.466505 67.3261) (xy 194.668679 67.294078) (xy 194.66868 67.294077) - (xy 194.668684 67.294077) (xy 194.863369 67.23082) (xy 195.04576 67.137887) (xy 195.211369 67.017566) - (xy 195.356116 66.872819) (xy 195.476437 66.70721) (xy 195.56937 66.524819) (xy 195.632627 66.330134) - (xy 195.632628 66.330129) (xy 195.66465 66.127955) (xy 195.66465 65.923244) (xy 195.632628 65.72107) - (xy 195.618164 65.676555) (xy 195.56937 65.526381) (xy 195.476437 65.34399) (xy 195.476435 65.343986) - (xy 195.35612 65.178386) (xy 195.356118 65.178384) (xy 195.356116 65.178381) (xy 195.211369 65.033634) - (xy 195.211365 65.033631) (xy 195.211363 65.033629) (xy 195.045763 64.913314) (xy 195.045759 64.913312) - (xy 194.863369 64.82038) (xy 194.668679 64.757121) (xy 194.466505 64.7251) (xy 194.466502 64.7251) - (xy 194.261798 64.7251) (xy 194.261795 64.7251) (xy 194.05962 64.757121) (xy 193.86493 64.82038) - (xy 193.68254 64.913312) (xy 193.682536 64.913314) (xy 193.516936 65.033629) (xy 193.372179 65.178386) - (xy 193.251864 65.343986) (xy 193.251862 65.34399) (xy 193.15893 65.52638) (xy 193.095671 65.72107) - (xy 193.06365 65.923244) (xy 190.58465 65.923244) (xy 190.552628 65.72107) (xy 190.538164 65.676555) - (xy 190.48937 65.526381) (xy 190.396437 65.34399) (xy 190.396435 65.343986) (xy 190.27612 65.178386) - (xy 190.276118 65.178384) (xy 190.276116 65.178381) (xy 190.131369 65.033634) (xy 190.131365 65.033631) - (xy 190.131363 65.033629) (xy 189.965763 64.913314) (xy 189.965759 64.913312) (xy 189.783369 64.82038) - (xy 189.588679 64.757121) (xy 189.386505 64.7251) (xy 189.386502 64.7251) (xy 189.181798 64.7251) - (xy 189.181795 64.7251) (xy 188.97962 64.757121) (xy 188.78493 64.82038) (xy 188.60254 64.913312) - (xy 188.602536 64.913314) (xy 188.436936 65.033629) (xy 188.292179 65.178386) (xy 188.171864 65.343986) - (xy 188.171862 65.34399) (xy 188.07893 65.52638) (xy 188.015671 65.72107) (xy 187.98365 65.923244) - (xy 177.813299 65.923244) (xy 180.8692 62.867343) (xy 187.38935 62.867343) (xy 187.38935 63.025457) - (xy 187.430273 63.178184) (xy 187.50933 63.315116) (xy 187.621134 63.42692) (xy 187.758066 63.505977) - (xy 187.910793 63.5469) (xy 187.910795 63.5469) (xy 188.068905 63.5469) (xy 188.068907 63.5469) - (xy 188.221634 63.505977) (xy 188.358566 63.42692) (xy 188.47037 63.315116) (xy 188.549427 63.178184) - (xy 188.59035 63.025457) (xy 188.59035 62.867343) (xy 188.549427 62.714616) (xy 188.47037 62.577684) - (xy 188.358566 62.46588) (xy 188.221634 62.386823) (xy 188.068907 62.3459) (xy 187.910793 62.3459) - (xy 187.758066 62.386823) (xy 187.621134 62.46588) (xy 187.50933 62.577684) (xy 187.430273 62.714616) - (xy 187.38935 62.867343) (xy 180.8692 62.867343) (xy 181.662447 62.074096) (xy 181.716964 62.046319) - (xy 181.732451 62.0451) (xy 188.637875 62.0451) (xy 188.637877 62.0451) (xy 188.739738 62.017807) - (xy 188.73974 62.017805) (xy 188.739742 62.017805) (xy 188.831058 61.965083) (xy 188.831058 61.965082) - (xy 188.831063 61.96508) (xy 192.997329 57.798812) (xy 193.051844 57.771037) (xy 193.112276 57.780608) - (xy 193.155541 57.823873) (xy 193.165112 57.884305) (xy 193.159948 57.902622) (xy 193.160132 57.902682) - (xy 193.095671 58.10107) (xy 193.06365 58.303244) (xy 193.06365 58.507955) (xy 193.095671 58.710129) - (xy 193.15893 58.904819) (xy 193.251862 59.087209) (xy 193.251864 59.087213) (xy 193.372179 59.252813) - (xy 193.372181 59.252815) (xy 193.372184 59.252819) (xy 193.516931 59.397566) (xy 193.516934 59.397568) - (xy 193.516936 59.39757) (xy 193.682536 59.517885) (xy 193.68254 59.517887) (xy 193.864931 59.61082) - (xy 194.059616 59.674077) (xy 194.059617 59.674077) (xy 194.05962 59.674078) (xy 194.261795 59.7061) - (xy 194.261798 59.7061) (xy 194.466505 59.7061) (xy 194.668679 59.674078) (xy 194.66868 59.674077) - (xy 194.668684 59.674077) (xy 194.863369 59.61082) (xy 195.04576 59.517887) (xy 195.211369 59.397566) - (xy 195.356116 59.252819) (xy 195.476437 59.08721) (xy 195.56937 58.904819) (xy 195.632627 58.710134) - (xy 195.632628 58.710129) (xy 195.66465 58.507955) (xy 195.66465 58.303244) (xy 195.632628 58.10107) - (xy 195.632627 58.101066) (xy 195.56937 57.906381) (xy 195.476437 57.72399) (xy 195.476435 57.723986) - (xy 195.35612 57.558386) (xy 195.356118 57.558384) (xy 195.356116 57.558381) (xy 195.211369 57.413634) - (xy 195.211365 57.413631) (xy 195.211363 57.413629) (xy 195.045763 57.293314) (xy 195.045759 57.293312) - (xy 194.947188 57.243088) (xy 194.909351 57.223809) (xy 194.866087 57.180545) (xy 194.856516 57.120113) - (xy 194.884293 57.065597) (xy 194.909349 57.047391) (xy 195.04576 56.977887) (xy 195.06085 56.966924) - (xy 195.10398 56.935588) (xy 195.211369 56.857566) (xy 195.356116 56.712819) (xy 195.476437 56.54721) - (xy 195.56937 56.364819) (xy 195.632627 56.170134) (xy 195.641273 56.115547) (xy 195.66465 55.967955) - (xy 195.66465 55.763244) (xy 195.632628 55.56107) (xy 195.632627 55.561066) (xy 195.56937 55.366381) - (xy 195.476437 55.18399) (xy 195.476435 55.183986) (xy 195.35612 55.018386) (xy 195.356118 55.018384) - (xy 195.356116 55.018381) (xy 195.211369 54.873634) (xy 195.211365 54.873631) (xy 195.211363 54.873629) - (xy 195.045763 54.753314) (xy 195.045759 54.753312) (xy 194.863369 54.66038) (xy 194.668679 54.597121) - (xy 194.466505 54.5651) (xy 194.466502 54.5651) (xy 194.261798 54.5651) (xy 194.261795 54.5651) - (xy 194.05962 54.597121) (xy 193.86493 54.66038) (xy 193.68254 54.753312) (xy 193.682536 54.753314) - (xy 193.516936 54.873629) (xy 193.372179 55.018386) (xy 193.251864 55.183986) (xy 193.251862 55.18399) - (xy 193.15893 55.36638) (xy 193.095671 55.56107) (xy 193.06365 55.763244) (xy 193.06365 55.967955) - (xy 193.095671 56.170129) (xy 193.15893 56.364819) (xy 193.173398 56.393214) (xy 193.182969 56.453646) - (xy 193.155192 56.508163) (xy 190.650973 59.012383) (xy 190.596456 59.04016) (xy 190.536024 59.030589) - (xy 190.492759 58.987324) (xy 190.483188 58.926892) (xy 190.488353 58.908578) (xy 190.488168 58.908518) - (xy 190.549386 58.720108) (xy 190.552627 58.710134) (xy 190.552628 58.710129) (xy 190.58465 58.507955) - (xy 190.58465 58.303244) (xy 190.552628 58.10107) (xy 190.552627 58.101066) (xy 190.48937 57.906381) - (xy 190.396437 57.72399) (xy 190.396435 57.723986) (xy 190.27612 57.558386) (xy 190.276118 57.558384) - (xy 190.276116 57.558381) (xy 190.131369 57.413634) (xy 190.131365 57.413631) (xy 190.131363 57.413629) - (xy 190.037166 57.345192) (xy 190.001202 57.295692) (xy 190.001201 57.234507) (xy 190.037165 57.185007) - (xy 190.095355 57.166099) (xy 190.329011 57.166099) (xy 190.329014 57.166099) (xy 190.354141 57.163185) - (xy 190.456915 57.117806) (xy 190.536356 57.038365) (xy 190.581735 56.935591) (xy 190.58465 56.910465) - (xy 190.584649 54.820736) (xy 190.581735 54.795609) (xy 190.536356 54.692835) (xy 190.456915 54.613394) - (xy 190.354141 54.568015) (xy 190.35414 54.568014) (xy 190.354138 54.568014) (xy 190.329018 54.5651) - (xy 188.239289 54.5651) (xy 188.239286 54.565101) (xy 188.214159 54.568014) (xy 188.111385 54.613394) - (xy 188.031944 54.692835) (xy 187.986564 54.795611) (xy 187.98365 54.82073) (xy 187.98365 56.91046) - (xy 187.983651 56.910463) (xy 187.986564 56.93559) (xy 188.00524 56.977887) (xy 188.031944 57.038365) - (xy 188.111385 57.117806) (xy 188.214159 57.163185) (xy 188.214161 57.163185) (xy 188.219483 57.165535) - (xy 188.265079 57.206336) (xy 188.277984 57.266145) (xy 188.25327 57.322117) (xy 188.200377 57.352873) - (xy 188.179495 57.3551) (xy 158.01029 57.3551) (xy 157.952099 57.336193) (xy 157.940286 57.326104) - (xy 156.54536 55.931179) (xy 156.521209 55.891767) (xy 156.517861 55.881461) (xy 156.435646 55.720106) - (xy 156.329203 55.573599) (xy 156.201151 55.445547) (xy 156.086768 55.362443) (xy 166.14125 55.362443) - (xy 166.14125 55.520557) (xy 166.182173 55.673284) (xy 166.26123 55.810216) (xy 166.373034 55.92202) - (xy 166.509966 56.001077) (xy 166.662693 56.042) (xy 166.662695 56.042) (xy 166.820805 56.042) (xy 166.820807 56.042) - (xy 166.973534 56.001077) (xy 167.110466 55.92202) (xy 167.22227 55.810216) (xy 167.301327 55.673284) - (xy 167.34225 55.520557) (xy 167.34225 55.362443) (xy 167.321109 55.283543) (xy 169.71245 55.283543) - (xy 169.71245 55.441657) (xy 169.753373 55.594384) (xy 169.83243 55.731316) (xy 169.944234 55.84312) - (xy 170.081166 55.922177) (xy 170.233893 55.9631) (xy 170.233895 55.9631) (xy 170.392005 55.9631) - (xy 170.392007 55.9631) (xy 170.544734 55.922177) (xy 170.681666 55.84312) (xy 170.79347 55.731316) - (xy 170.872527 55.594384) (xy 170.91345 55.441657) (xy 170.91345 55.283543) (xy 170.872527 55.130816) - (xy 170.79347 54.993884) (xy 170.681666 54.88208) (xy 170.544734 54.803023) (xy 170.392007 54.7621) - (xy 170.233893 54.7621) (xy 170.081166 54.803023) (xy 169.944234 54.88208) (xy 169.83243 54.993884) - (xy 169.753373 55.130816) (xy 169.71245 55.283543) (xy 167.321109 55.283543) (xy 167.301327 55.209716) - (xy 167.22227 55.072784) (xy 167.110466 54.96098) (xy 166.973534 54.881923) (xy 166.820807 54.841) - (xy 166.662693 54.841) (xy 166.509966 54.881923) (xy 166.373034 54.96098) (xy 166.26123 55.072784) - (xy 166.182173 55.209716) (xy 166.14125 55.362443) (xy 156.086768 55.362443) (xy 156.054644 55.339104) - (xy 156.054643 55.339103) (xy 156.054641 55.339102) (xy 155.893287 55.256888) (xy 155.721056 55.200928) - (xy 155.542199 55.1726) (xy 155.542196 55.1726) (xy 155.361104 55.1726) (xy 155.361101 55.1726) - (xy 155.182243 55.200928) (xy 155.010012 55.256888) (xy 154.848658 55.339102) (xy 154.811112 55.366381) - (xy 154.702149 55.445547) (xy 154.574097 55.573599) (xy 154.543625 55.61554) (xy 154.467652 55.720108) - (xy 154.385437 55.881464) (xy 154.385436 55.881466) (xy 154.380685 55.896088) (xy 154.344719 55.945586) - (xy 154.286528 55.964491) (xy 154.228338 55.945581) (xy 154.192377 55.896083) (xy 154.162746 55.804886) - (xy 154.066273 55.615546) (xy 154.066269 55.61554) (xy 154.02692 55.561382) (xy 154.026919 55.561382) - (xy 153.394612 56.193689) (xy 153.377575 56.130107) (xy 153.311749 56.016093) (xy 153.218657 55.923001) - (xy 153.104643 55.857175) (xy 153.041057 55.840137) (xy 153.673366 55.207829) (xy 153.673366 55.207828) - (xy 153.619209 55.16848) (xy 153.619203 55.168476) (xy 153.429865 55.072004) (xy 153.227771 55.00634) - (xy 153.0179 54.9731) (xy 152.8054 54.9731) (xy 152.595528 55.00634) (xy 152.393434 55.072004) (xy 152.204096 55.168476) - (xy 152.204092 55.168478) (xy 152.149932 55.207828) (xy 152.782241 55.840137) (xy 152.718657 55.857175) - (xy 152.604643 55.923001) (xy 152.511551 56.016093) (xy 152.445725 56.130107) (xy 152.428687 56.193691) - (xy 151.796378 55.561382) (xy 151.757028 55.615542) (xy 151.757026 55.615546) (xy 151.660554 55.804884) - (xy 151.630922 55.896084) (xy 151.594958 55.945584) (xy 151.536767 55.964491) (xy 151.478576 55.945584) - (xy 151.442612 55.896084) (xy 151.442612 55.896083) (xy 151.441209 55.891765) (xy 151.437861 55.881461) - (xy 151.355646 55.720106) (xy 151.249203 55.573599) (xy 151.121151 55.445547) (xy 150.974644 55.339104) - (xy 150.97464 55.339101) (xy 150.974638 55.3391) (xy 150.964177 55.33377) (xy 150.964176 55.33377) - (xy 150.813287 55.256888) (xy 150.641056 55.200928) (xy 150.462199 55.1726) (xy 150.462196 55.1726) - (xy 150.281104 55.1726) (xy 150.281101 55.1726) (xy 150.102243 55.200928) (xy 149.930012 55.256888) - (xy 149.768658 55.339102) (xy 149.731112 55.366381) (xy 149.622149 55.445547) (xy 149.494097 55.573599) - (xy 149.463625 55.61554) (xy 149.387652 55.720108) (xy 149.305438 55.881462) (xy 149.249478 56.053693) - (xy 149.22115 56.23255) (xy 149.22115 56.413649) (xy 149.249478 56.592506) (xy 149.305438 56.764737) - (xy 149.382114 56.915223) (xy 149.387654 56.926094) (xy 149.494097 57.072601) (xy 149.622149 57.200653) - (xy 149.768656 57.307096) (xy 149.930011 57.389311) (xy 150.102241 57.445271) (xy 150.173786 57.456602) - (xy 150.281101 57.4736) (xy 150.281104 57.4736) (xy 150.462199 57.4736) (xy 150.551627 57.459435) - (xy 150.641059 57.445271) (xy 150.813289 57.389311) (xy 150.813292 57.389309) (xy 150.813296 57.389308) - (xy 150.945164 57.322117) (xy 150.964177 57.312429) (xy 150.96418 57.312428) (xy 150.967816 57.310574) - (xy 150.974644 57.307096) (xy 151.121151 57.200653) (xy 151.249203 57.072601) (xy 151.355646 56.926094) - (xy 151.437861 56.764739) (xy 151.442612 56.750118) (xy 151.478574 56.700617) (xy 151.536765 56.681708) - (xy 151.594956 56.700614) (xy 151.630921 56.750113) (xy 151.630922 56.750115) (xy 151.660554 56.841315) - (xy 151.757026 57.030653) (xy 151.75703 57.030659) (xy 151.796378 57.084816) (xy 151.796379 57.084816) - (xy 152.428687 56.452507) (xy 152.445725 56.516093) (xy 152.511551 56.630107) (xy 152.604643 56.723199) - (xy 152.718657 56.789025) (xy 152.782239 56.806062) (xy 152.149932 57.438369) (xy 152.149932 57.43837) - (xy 152.20409 57.477719) (xy 152.204096 57.477723) (xy 152.393434 57.574195) (xy 152.595528 57.639859) - (xy 152.8054 57.6731) (xy 153.0179 57.6731) (xy 153.227771 57.639859) (xy 153.429865 57.574195) - (xy 153.619206 57.47772) (xy 153.673366 57.43837) (xy 153.041058 56.806062) (xy 153.104643 56.789025) - (xy 153.218657 56.723199) (xy 153.311749 56.630107) (xy 153.377575 56.516093) (xy 153.394612 56.452508) - (xy 154.02692 57.084816) (xy 154.06627 57.030656) (xy 154.162746 56.841313) (xy 154.192377 56.750116) - (xy 154.22834 56.700616) (xy 154.286531 56.681708) (xy 154.344722 56.700615) (xy 154.380686 56.750113) - (xy 154.385438 56.764737) (xy 154.462114 56.915223) (xy 154.467654 56.926094) (xy 154.574097 57.072601) - (xy 154.702149 57.200653) (xy 154.848656 57.307096) (xy 155.010011 57.389311) (xy 155.020317 57.392659) - (xy 155.059729 57.41681) (xy 156.657414 59.014496) (xy 156.685191 59.069013) (xy 156.67562 59.129445) - (xy 156.632355 59.17271) (xy 156.58741 59.1835) (xy 144.555751 59.1835) (xy 144.49756 59.164593) - (xy 144.485747 59.154504) (xy 142.94734 57.616097) (xy 142.919563 57.56158) (xy 142.929134 57.501148) - (xy 142.972399 57.457883) (xy 143.001855 57.448312) (xy 143.021059 57.445271) (xy 143.193289 57.389311) - (xy 143.354644 57.307096) (xy 143.501151 57.200653) (xy 143.629203 57.072601) (xy 143.735646 56.926094) - (xy 143.817861 56.764739) (xy 143.873821 56.592509) (xy 143.887985 56.503077) (xy 143.90215 56.413649) - (xy 143.90215 56.23255) (xy 144.14115 56.23255) (xy 144.14115 56.413649) (xy 144.169478 56.592506) - (xy 144.225438 56.764737) (xy 144.302114 56.915223) (xy 144.307654 56.926094) (xy 144.414097 57.072601) - (xy 144.542149 57.200653) (xy 144.688656 57.307096) (xy 144.850011 57.389311) (xy 145.022241 57.445271) - (xy 145.093786 57.456602) (xy 145.201101 57.4736) (xy 145.201104 57.4736) (xy 145.382199 57.4736) - (xy 145.471627 57.459435) (xy 145.561059 57.445271) (xy 145.733289 57.389311) (xy 145.894644 57.307096) - (xy 146.041151 57.200653) (xy 146.169203 57.072601) (xy 146.275646 56.926094) (xy 146.357861 56.764739) - (xy 146.413821 56.592509) (xy 146.427985 56.503077) (xy 146.44215 56.413649) (xy 146.44215 56.23255) - (xy 146.68115 56.23255) (xy 146.68115 56.413649) (xy 146.709478 56.592506) (xy 146.765438 56.764737) - (xy 146.842114 56.915223) (xy 146.847654 56.926094) (xy 146.954097 57.072601) (xy 147.082149 57.200653) - (xy 147.228656 57.307096) (xy 147.390011 57.389311) (xy 147.562241 57.445271) (xy 147.633786 57.456602) - (xy 147.741101 57.4736) (xy 147.741104 57.4736) (xy 147.922199 57.4736) (xy 148.011627 57.459435) - (xy 148.101059 57.445271) (xy 148.273289 57.389311) (xy 148.434644 57.307096) (xy 148.581151 57.200653) - (xy 148.709203 57.072601) (xy 148.815646 56.926094) (xy 148.897861 56.764739) (xy 148.953821 56.592509) - (xy 148.967985 56.503077) (xy 148.98215 56.413649) (xy 148.98215 56.23255) (xy 148.963264 56.113312) - (xy 148.953821 56.053691) (xy 148.897861 55.881461) (xy 148.815646 55.720106) (xy 148.709203 55.573599) - (xy 148.581151 55.445547) (xy 148.434644 55.339104) (xy 148.434643 55.339103) (xy 148.434641 55.339102) - (xy 148.273287 55.256888) (xy 148.101056 55.200928) (xy 147.922199 55.1726) (xy 147.922196 55.1726) - (xy 147.741104 55.1726) (xy 147.741101 55.1726) (xy 147.562243 55.200928) (xy 147.390012 55.256888) - (xy 147.228658 55.339102) (xy 147.191112 55.366381) (xy 147.082149 55.445547) (xy 146.954097 55.573599) - (xy 146.923625 55.61554) (xy 146.847652 55.720108) (xy 146.765438 55.881462) (xy 146.709478 56.053693) - (xy 146.68115 56.23255) (xy 146.44215 56.23255) (xy 146.423264 56.113312) (xy 146.413821 56.053691) - (xy 146.357861 55.881461) (xy 146.275646 55.720106) (xy 146.169203 55.573599) (xy 146.041151 55.445547) - (xy 145.894644 55.339104) (xy 145.894643 55.339103) (xy 145.894641 55.339102) (xy 145.733287 55.256888) - (xy 145.561056 55.200928) (xy 145.382199 55.1726) (xy 145.382196 55.1726) (xy 145.201104 55.1726) - (xy 145.201101 55.1726) (xy 145.022243 55.200928) (xy 144.850012 55.256888) (xy 144.688658 55.339102) - (xy 144.651112 55.366381) (xy 144.542149 55.445547) (xy 144.414097 55.573599) (xy 144.383625 55.61554) - (xy 144.307652 55.720108) (xy 144.225438 55.881462) (xy 144.169478 56.053693) (xy 144.14115 56.23255) - (xy 143.90215 56.23255) (xy 143.883264 56.113312) (xy 143.873821 56.053691) (xy 143.817861 55.881461) - (xy 143.735646 55.720106) (xy 143.629203 55.573599) (xy 143.501151 55.445547) (xy 143.354644 55.339104) - (xy 143.354643 55.339103) (xy 143.354641 55.339102) (xy 143.193287 55.256888) (xy 143.021056 55.200928) - (xy 142.842199 55.1726) (xy 142.842196 55.1726) (xy 142.661104 55.1726) (xy 142.661101 55.1726) - (xy 142.482243 55.200928) (xy 142.310012 55.256888) (xy 142.148658 55.339102) (xy 142.111112 55.366381) - (xy 142.002149 55.445547) (xy 142.002147 55.445549) (xy 141.874095 55.573601) (xy 141.852658 55.603107) - (xy 141.803158 55.63907) (xy 141.741972 55.639069) (xy 141.702562 55.614919) (xy 140.584729 54.497086) - (xy 139.354886 53.267243) (xy 172.80615 53.267243) (xy 172.80615 53.425357) (xy 172.847073 53.578084) - (xy 172.92613 53.715016) (xy 173.037934 53.82682) (xy 173.174866 53.905877) (xy 173.327593 53.9468) - (xy 173.327595 53.9468) (xy 173.485705 53.9468) (xy 173.485707 53.9468) (xy 173.638434 53.905877) - (xy 173.775366 53.82682) (xy 173.88717 53.715016) (xy 173.966227 53.578084) (xy 174.00715 53.425357) - (xy 174.00715 53.267243) (xy 173.966227 53.114516) (xy 173.88717 52.977584) (xy 173.775366 52.86578) - (xy 173.638434 52.786723) (xy 173.485707 52.7458) (xy 173.327593 52.7458) (xy 173.174866 52.786723) - (xy 173.037934 52.86578) (xy 172.92613 52.977584) (xy 172.847073 53.114516) (xy 172.80615 53.267243) - (xy 139.354886 53.267243) (xy 138.887663 52.80002) (xy 138.88766 52.800018) (xy 138.887658 52.800016) - (xy 138.796341 52.747294) (xy 138.796343 52.747294) (xy 138.75682 52.736704) (xy 138.694477 52.72) - (xy 138.694475 52.72) (xy 126.415751 52.72) (xy 126.35756 52.701093) (xy 126.345747 52.691004) (xy 125.126186 51.471443) - (xy 151.61645 51.471443) (xy 151.61645 51.629557) (xy 151.657373 51.782284) (xy 151.73643 51.919216) - (xy 151.848234 52.03102) (xy 151.985166 52.110077) (xy 152.137893 52.151) (xy 152.137895 52.151) - (xy 152.296005 52.151) (xy 152.296007 52.151) (xy 152.448734 52.110077) (xy 152.585666 52.03102) - (xy 152.69747 51.919216) (xy 152.776527 51.782284) (xy 152.81745 51.629557) (xy 152.81745 51.520043) - (xy 183.04425 51.520043) (xy 183.04425 51.678157) (xy 183.085173 51.830884) (xy 183.16423 51.967816) - (xy 183.276034 52.07962) (xy 183.412966 52.158677) (xy 183.565693 52.1996) (xy 183.565695 52.1996) - (xy 183.723805 52.1996) (xy 183.723807 52.1996) (xy 183.876534 52.158677) (xy 184.013466 52.07962) - (xy 184.12527 51.967816) (xy 184.204327 51.830884) (xy 184.24525 51.678157) (xy 184.24525 51.520043) - (xy 184.204327 51.367316) (xy 184.12527 51.230384) (xy 184.013466 51.11858) (xy 183.876534 51.039523) - (xy 183.723807 50.9986) (xy 183.565693 50.9986) (xy 183.412966 51.039523) (xy 183.276034 51.11858) - (xy 183.16423 51.230384) (xy 183.085173 51.367316) (xy 183.04425 51.520043) (xy 152.81745 51.520043) - (xy 152.81745 51.471443) (xy 152.776527 51.318716) (xy 152.69747 51.181784) (xy 152.585666 51.06998) - (xy 152.448734 50.990923) (xy 152.296007 50.95) (xy 152.137893 50.95) (xy 151.985166 50.990923) - (xy 151.848234 51.06998) (xy 151.73643 51.181784) (xy 151.657373 51.318716) (xy 151.61645 51.471443) - (xy 125.126186 51.471443) (xy 124.573086 50.918343) (xy 188.96225 50.918343) (xy 188.96225 51.076457) - (xy 189.003173 51.229184) (xy 189.08223 51.366116) (xy 189.194034 51.47792) (xy 189.330966 51.556977) - (xy 189.483693 51.5979) (xy 189.483695 51.5979) (xy 189.641805 51.5979) (xy 189.641807 51.5979) - (xy 189.794534 51.556977) (xy 189.931466 51.47792) (xy 190.04327 51.366116) (xy 190.122327 51.229184) - (xy 190.16325 51.076457) (xy 190.16325 50.918343) (xy 190.16325 50.914353) (xy 190.182157 50.856162) - (xy 190.231657 50.820198) (xy 190.292843 50.820198) (xy 190.295439 50.821156) (xy 190.297344 50.821733) - (xy 190.297353 50.821737) (xy 190.452008 50.8525) (xy 198.047964 50.8525) (xy 198.106155 50.871407) - (xy 198.117968 50.881496) (xy 208.887154 61.650682) (xy 208.914931 61.705199) (xy 208.91615 61.720686) - (xy 208.91615 62.466206) (xy 208.926773 62.554665) (xy 208.982287 62.695439) (xy 208.982288 62.695441) - (xy 208.982289 62.695442) (xy 209.073728 62.816022) (xy 209.194308 62.907461) (xy 209.194309 62.907461) - (xy 209.19431 62.907462) (xy 209.223153 62.918836) (xy 209.335086 62.962977) (xy 209.423548 62.9736) - (xy 209.42355 62.9736) (xy 210.95975 62.9736) (xy 210.959752 62.9736) (xy 211.048214 62.962977) - (xy 211.188992 62.907461) (xy 211.309572 62.816022) (xy 211.401011 62.695442) (xy 211.456527 62.554664) - (xy 211.46715 62.466202) (xy 211.46715 61.179998) (xy 211.456527 61.091536) (xy 211.42009 60.999138) - (xy 211.401012 60.95076) (xy 211.401011 60.950759) (xy 211.401011 60.950758) (xy 211.309572 60.830178) - (xy 211.188992 60.738739) (xy 211.188991 60.738738) (xy 211.188989 60.738737) (xy 211.048215 60.683223) - (xy 210.959756 60.6726) (xy 210.959752 60.6726) (xy 210.214236 60.6726) (xy 210.206638 60.670131) - (xy 210.198749 60.671381) (xy 210.178093 60.660856) (xy 210.156045 60.653693) (xy 210.144232 60.643604) - (xy 210.143232 60.642604) (xy 210.115455 60.588087) (xy 210.125026 60.527655) (xy 210.168291 60.48439) - (xy 210.213236 60.4736) (xy 210.407199 60.4736) (xy 210.496627 60.459435) (xy 210.586059 60.445271) - (xy 210.758289 60.389311) (xy 210.919644 60.307096) (xy 211.066151 60.200653) (xy 211.194203 60.072601) - (xy 211.300646 59.926094) (xy 211.382861 59.764739) (xy 211.438821 59.592509) (xy 211.4551 59.48973) - (xy 211.46715 59.413649) (xy 211.46715 59.23255) (xy 211.438821 59.053693) (xy 211.438821 59.053691) - (xy 211.382861 58.881461) (xy 211.300646 58.720106) (xy 211.194203 58.573599) (xy 211.066151 58.445547) - (xy 210.919644 58.339104) (xy 210.91964 58.339101) (xy 210.919638 58.3391) (xy 210.782123 58.269032) - (xy 210.738859 58.225768) (xy 210.729288 58.165335) (xy 210.757066 58.110819) (xy 210.796478 58.086668) - (xy 210.834862 58.074197) (xy 211.024202 57.977724) (xy 211.196114 57.852822) (xy 211.346372 57.702564) - (xy 211.471274 57.530652) (xy 211.567745 57.341315) (xy 211.633408 57.139222) (xy 211.643881 57.0731) - (xy 210.595796 57.0731) (xy 210.63428 57.006443) (xy 210.66665 56.885635) (xy 210.66665 56.760565) - (xy 210.63428 56.639757) (xy 210.595796 56.5731) (xy 211.643881 56.5731) (xy 211.643881 56.573099) - (xy 211.633408 56.506977) (xy 211.567745 56.304884) (xy 211.471274 56.115547) (xy 211.346372 55.943635) - (xy 211.196114 55.793377) (xy 211.024202 55.668475) (xy 210.834859 55.572001) (xy 210.796476 55.55953) - (xy 210.746976 55.523566) (xy 210.728069 55.465376) (xy 210.746977 55.407185) (xy 210.782122 55.377166) - (xy 210.919644 55.307096) (xy 211.066151 55.200653) (xy 211.194203 55.072601) (xy 211.300646 54.926094) - (xy 211.382861 54.764739) (xy 211.438821 54.592509) (xy 211.465745 54.422517) (xy 211.46715 54.413649) - (xy 211.46715 54.23255) (xy 211.438821 54.053693) (xy 211.438821 54.053691) (xy 211.382861 53.881461) - (xy 211.300646 53.720106) (xy 211.194203 53.573599) (xy 211.066151 53.445547) (xy 210.919644 53.339104) - (xy 210.919643 53.339103) (xy 210.919641 53.339102) (xy 210.758287 53.256888) (xy 210.586056 53.200928) - (xy 210.407199 53.1726) (xy 210.407196 53.1726) (xy 209.976104 53.1726) (xy 209.976101 53.1726) - (xy 209.797243 53.200928) (xy 209.625012 53.256888) (xy 209.463658 53.339102) (xy 209.426068 53.366413) - (xy 209.317149 53.445547) (xy 209.189097 53.573599) (xy 209.135875 53.646852) (xy 209.082652 53.720108) - (xy 209.000438 53.881462) (xy 208.944478 54.053693) (xy 208.91615 54.23255) (xy 208.91615 54.413649) - (xy 208.944478 54.592506) (xy 209.000438 54.764737) (xy 209.060227 54.88208) (xy 209.082654 54.926094) - (xy 209.189097 55.072601) (xy 209.317149 55.200653) (xy 209.463656 55.307096) (xy 209.463658 55.307097) - (xy 209.601175 55.377166) (xy 209.64444 55.420431) (xy 209.654011 55.480863) (xy 209.626233 55.53538) - (xy 209.586824 55.55953) (xy 209.548438 55.572002) (xy 209.359097 55.668475) (xy 209.187185 55.793377) - (xy 209.036927 55.943635) (xy 208.912025 56.115547) (xy 208.815554 56.304884) (xy 208.749891 56.506977) - (xy 208.739418 56.573099) (xy 208.739419 56.5731) (xy 209.787504 56.5731) (xy 209.74902 56.639757) - (xy 209.71665 56.760565) (xy 209.71665 56.885635) (xy 209.74902 57.006443) (xy 209.787504 57.0731) - (xy 208.739419 57.0731) (xy 208.749891 57.139222) (xy 208.815554 57.341315) (xy 208.912025 57.530652) - (xy 209.036927 57.702564) (xy 209.187185 57.852822) (xy 209.359097 57.977724) (xy 209.548436 58.074196) - (xy 209.586822 58.086668) (xy 209.636322 58.122631) (xy 209.65523 58.180822) (xy 209.636323 58.239013) - (xy 209.601176 58.269032) (xy 209.463661 58.3391) (xy 209.463659 58.339101) (xy 209.375751 58.402969) - (xy 209.317149 58.445547) (xy 209.189097 58.573599) (xy 209.135875 58.646852) (xy 209.082652 58.720108) - (xy 209.000438 58.881462) (xy 208.944478 59.053693) (xy 208.921527 59.198597) (xy 208.893749 59.253114) - (xy 208.839233 59.280891) (xy 208.778801 59.271319) (xy 208.753742 59.253114) (xy 198.930842 49.430214) - (xy 198.930839 49.430211) (xy 198.878609 49.395312) (xy 198.799735 49.342609) (xy 198.799724 49.342603) - (xy 198.654047 49.282263) (xy 198.499394 49.2515) (xy 198.499392 49.2515) (xy 196.63814 49.2515) - (xy 196.579949 49.232593) (xy 196.543985 49.183093) (xy 196.543985 49.121907) (xy 196.552403 49.103001) - (xy 196.577526 49.059485) (xy 196.577527 49.059484) (xy 196.61845 48.906757) (xy 196.61845 48.748643) - (xy 196.577527 48.595916) (xy 196.49847 48.458984) (xy 196.452929 48.413443) (xy 199.40675 48.413443) - (xy 199.40675 48.571557) (xy 199.447673 48.724284) (xy 199.52673 48.861216) (xy 199.638534 48.97302) - (xy 199.775466 49.052077) (xy 199.928193 49.093) (xy 199.928195 49.093) (xy 200.086305 49.093) (xy 200.086307 49.093) - (xy 200.239034 49.052077) (xy 200.375966 48.97302) (xy 200.48777 48.861216) (xy 200.566827 48.724284) - (xy 200.60775 48.571557) (xy 200.60775 48.413443) (xy 200.566827 48.260716) (xy 200.48777 48.123784) - (xy 200.375966 48.01198) (xy 200.239034 47.932923) (xy 200.086307 47.892) (xy 199.928193 47.892) - (xy 199.775466 47.932923) (xy 199.638534 48.01198) (xy 199.52673 48.123784) (xy 199.447673 48.260716) - (xy 199.40675 48.413443) (xy 196.452929 48.413443) (xy 196.386666 48.34718) (xy 196.249734 48.268123) - (xy 196.097007 48.2272) (xy 195.938893 48.2272) (xy 195.786166 48.268123) (xy 195.649234 48.34718) - (xy 195.53743 48.458984) (xy 195.458373 48.595916) (xy 195.41745 48.748643) (xy 195.41745 48.906757) - (xy 195.430014 48.953646) (xy 195.458373 49.059485) (xy 195.483497 49.103001) (xy 195.496218 49.162849) - (xy 195.471331 49.218745) (xy 195.418342 49.249337) (xy 195.39776 49.2515) (xy 190.615569 49.2515) - (xy 190.613532 49.2514) (xy 190.609692 49.2514) (xy 190.452008 49.2514) (xy 190.452005 49.2514) - (xy 190.297353 49.282163) (xy 190.297351 49.282163) (xy 190.151675 49.342503) (xy 190.151664 49.342509) - (xy 190.020561 49.430111) (xy 190.020557 49.430114) (xy 189.909064 49.541607) (xy 189.909061 49.541611) - (xy 189.821459 49.672714) (xy 189.821453 49.672725) (xy 189.761113 49.818401) (xy 189.761113 49.818403) - (xy 189.73035 49.973055) (xy 189.73035 50.130844) (xy 189.760177 50.280793) (xy 189.752985 50.341554) - (xy 189.711453 50.386484) (xy 189.651443 50.398421) (xy 189.647261 50.397618) (xy 189.641807 50.3969) - (xy 189.483693 50.3969) (xy 189.330966 50.437823) (xy 189.194034 50.51688) (xy 189.08223 50.628684) - (xy 189.003173 50.765616) (xy 188.96225 50.918343) (xy 124.573086 50.918343) (xy 123.368386 49.713643) - (xy 172.77165 49.713643) (xy 172.77165 49.871757) (xy 172.812573 50.024484) (xy 172.89163 50.161416) - (xy 173.003434 50.27322) (xy 173.140366 50.352277) (xy 173.293093 50.3932) (xy 173.293095 50.3932) - (xy 173.451205 50.3932) (xy 173.451207 50.3932) (xy 173.603934 50.352277) (xy 173.740866 50.27322) - (xy 173.85267 50.161416) (xy 173.931727 50.024484) (xy 173.97265 49.871757) (xy 173.97265 49.756143) - (xy 179.00285 49.756143) (xy 179.00285 49.914257) (xy 179.043773 50.066984) (xy 179.12283 50.203916) - (xy 179.234634 50.31572) (xy 179.371566 50.394777) (xy 179.524293 50.4357) (xy 179.524295 50.4357) - (xy 179.682405 50.4357) (xy 179.682407 50.4357) (xy 179.835134 50.394777) (xy 179.972066 50.31572) - (xy 180.08387 50.203916) (xy 180.162927 50.066984) (xy 180.20385 49.914257) (xy 180.20385 49.756143) - (xy 180.162927 49.603416) (xy 180.08387 49.466484) (xy 179.972066 49.35468) (xy 179.835134 49.275623) - (xy 179.682407 49.2347) (xy 179.524293 49.2347) (xy 179.371566 49.275623) (xy 179.234634 49.35468) - (xy 179.12283 49.466484) (xy 179.043773 49.603416) (xy 179.00285 49.756143) (xy 173.97265 49.756143) - (xy 173.97265 49.713643) (xy 173.931727 49.560916) (xy 173.85267 49.423984) (xy 173.740866 49.31218) - (xy 173.603934 49.233123) (xy 173.451207 49.1922) (xy 173.293093 49.1922) (xy 173.140366 49.233123) - (xy 173.003434 49.31218) (xy 172.89163 49.423984) (xy 172.812573 49.560916) (xy 172.77165 49.713643) - (xy 123.368386 49.713643) (xy 121.55546 47.900717) (xy 121.527683 47.8462) (xy 121.537254 47.785768) - (xy 121.580519 47.742503) (xy 121.594872 47.736558) (xy 121.709863 47.699196) (xy 121.899202 47.602724) - (xy 122.071114 47.477822) (xy 122.221372 47.327564) (xy 122.346274 47.155652) (xy 122.442745 46.966315) - (xy 122.508409 46.764221) (xy 122.53868 46.5731) (xy 121.595796 46.5731) (xy 121.63428 46.506443) - (xy 121.66665 46.385635) (xy 121.66665 46.260565) (xy 121.63428 46.139757) (xy 121.595796 46.0731) - (xy 122.53868 46.0731) (xy 122.53868 46.073099) (xy 122.508409 45.881978) (xy 122.442745 45.679884) - (xy 122.346274 45.490547) (xy 122.221372 45.318635) (xy 122.071114 45.168377) (xy 121.899202 45.043475) - (xy 121.709865 44.947004) (xy 121.50777 44.88134) (xy 121.44165 44.870867) (xy 121.44165 45.918954) - (xy 121.374993 45.88047) (xy 121.254185 45.8481) (xy 121.129115 45.8481) (xy 121.008307 45.88047) - (xy 120.94165 45.918954) (xy 120.94165 44.870868) (xy 120.941649 44.870867) (xy 120.87553 44.88134) - (xy 120.875528 44.88134) (xy 120.673434 44.947004) (xy 120.484097 45.043475) (xy 120.312185 45.168377) - (xy 120.161927 45.318635) (xy 120.037025 45.490547) (xy 119.940552 45.679888) (xy 119.92808 45.718274) - (xy 119.892116 45.767773) (xy 119.833925 45.78668) (xy 119.775734 45.767772) (xy 119.745716 45.732625) - (xy 119.675647 45.595108) (xy 119.675646 45.595106) (xy 119.569203 45.448599) (xy 119.441151 45.320547) - (xy 119.294644 45.214104) (xy 119.294643 45.214103) (xy 119.294641 45.214102) (xy 119.133287 45.131888) - (xy 118.961056 45.075928) (xy 118.782199 45.0476) (xy 118.782196 45.0476) (xy 118.601104 45.0476) - (xy 118.601101 45.0476) (xy 118.422243 45.075928) (xy 118.250012 45.131888) (xy 118.088658 45.214102) - (xy 118.07931 45.220894) (xy 117.942149 45.320547) (xy 117.814097 45.448599) (xy 117.778598 45.49746) - (xy 117.707652 45.595108) (xy 117.625438 45.756462) (xy 117.569478 45.928693) (xy 117.54115 46.10755) - (xy 117.54115 46.538649) (xy 117.569478 46.717506) (xy 117.625438 46.889737) (xy 117.707651 47.05109) - (xy 117.707654 47.051094) (xy 117.814097 47.197601) (xy 117.942149 47.325653) (xy 118.088656 47.432096) - (xy 118.250011 47.514311) (xy 118.422241 47.570271) (xy 118.493786 47.581602) (xy 118.601101 47.5986) - (xy 118.601104 47.5986) (xy 118.782199 47.5986) (xy 118.871627 47.584435) (xy 118.961059 47.570271) - (xy 119.133289 47.514311) (xy 119.294644 47.432096) (xy 119.441151 47.325653) (xy 119.569203 47.197601) - (xy 119.569205 47.197597) (xy 119.571953 47.19485) (xy 119.572717 47.195614) (xy 119.621066 47.165978) - (xy 119.682063 47.170771) (xy 119.714193 47.192236) (xy 125.88837 53.366413) (xy 125.888369 53.366413) - (xy 125.947312 53.425355) (xy 125.962937 53.44098) (xy 126.054263 53.493707) (xy 126.156123 53.521) - (xy 126.261577 53.521) (xy 138.434849 53.521) (xy 138.49304 53.539907) (xy 138.504853 53.549996) - (xy 139.989442 55.034585) (xy 139.993111 55.041787) (xy 139.999641 55.04655) (xy 140.006735 55.068526) - (xy 140.017219 55.089102) (xy 140.015954 55.097084) (xy 140.018438 55.104776) (xy 140.01126 55.126723) - (xy 140.007648 55.149534) (xy 140.001931 55.15525) (xy 139.99942 55.162931) (xy 139.983897 55.173284) - (xy 139.964383 55.192799) (xy 139.949853 55.198801) (xy 139.944243 55.200611) (xy 139.942241 55.200929) - (xy 139.784215 55.252273) (xy 139.78362 55.252466) (xy 139.753025 55.252408) (xy 139.722612 55.252408) - (xy 139.722519 55.252351) (xy 139.722434 55.252351) (xy 139.721987 55.252025) (xy 139.683201 55.228258) - (xy 139.295943 54.841) (xy 138.877463 54.42252) (xy 138.87746 54.422518) (xy 138.877459 54.422517) - (xy 138.877458 54.422516) (xy 138.786141 54.369794) (xy 138.786143 54.369794) (xy 138.74662 54.359204) - (xy 138.684277 54.3425) (xy 138.684275 54.3425) (xy 122.367956 54.3425) (xy 122.36794 54.342499) - (xy 122.361877 54.342499) (xy 122.256424 54.342499) (xy 122.154563 54.369793) (xy 122.154561 54.369793) - (xy 122.154557 54.369795) (xy 122.063237 54.422519) (xy 121.988669 54.497086) (xy 121.98867 54.497087) - (xy 121.988668 54.497089) (xy 120.910683 55.575072) (xy 120.856166 55.602849) (xy 120.795734 55.593278) - (xy 120.770675 55.575072) (xy 120.769204 55.573601) (xy 120.769203 55.573599) (xy 120.641151 55.445547) - (xy 120.494644 55.339104) (xy 120.494643 55.339103) (xy 120.494641 55.339102) (xy 120.333287 55.256888) - (xy 120.161056 55.200928) (xy 119.982199 55.1726) (xy 119.982196 55.1726) (xy 119.801104 55.1726) - (xy 119.801101 55.1726) (xy 119.622243 55.200928) (xy 119.450012 55.256888) (xy 119.288658 55.339102) - (xy 119.251112 55.366381) (xy 119.142149 55.445547) (xy 119.014097 55.573599) (xy 118.983625 55.61554) - (xy 118.907652 55.720108) (xy 118.825438 55.881462) (xy 118.769478 56.053693) (xy 118.74115 56.23255) - (xy 118.74115 56.413649) (xy 118.769478 56.592506) (xy 118.820959 56.750951) (xy 118.820958 56.812136) - (xy 118.796808 56.851547) (xy 108.376953 67.271404) (xy 108.322436 67.299181) (xy 108.306949 67.3004) - (xy 92.688294 67.3004) (xy 92.630103 67.281493) (xy 92.618291 67.271404) (xy 92.567268 67.220382) - (xy 92.567266 67.22038) (xy 92.430334 67.141323) (xy 92.277607 67.1004) (xy 92.119493 67.1004) (xy 92.055735 67.117484) - (xy 91.966764 67.141323) (xy 91.890649 67.185268) (xy 91.830801 67.197989) (xy 91.774905 67.173102) - (xy 91.744313 67.120113) (xy 91.74215 67.099531) (xy 91.74215 65.93) (xy 91.761057 65.871809) (xy 91.77114 65.860002) - (xy 93.96213 63.669013) (xy 94.006989 63.591316) (xy 94.014855 63.577692) (xy 94.014855 63.57769) - (xy 94.014857 63.577688) (xy 94.04215 63.475827) (xy 94.04215 63.370373) (xy 94.04215 55.42823) - (xy 106.04115 55.42823) (xy 106.04115 57.21796) (xy 106.041151 57.217963) (xy 106.044064 57.24309) - (xy 106.068354 57.2981) (xy 106.089444 57.345865) (xy 106.168885 57.425306) (xy 106.271659 57.470685) - (xy 106.296785 57.4736) (xy 108.086514 57.473599) (xy 108.111641 57.470685) (xy 108.214415 57.425306) - (xy 108.293856 57.345865) (xy 108.339235 57.243091) (xy 108.34215 57.217965) (xy 108.342149 56.23255) - (xy 108.58115 56.23255) (xy 108.58115 56.413649) (xy 108.609478 56.592506) (xy 108.665438 56.764737) - (xy 108.742114 56.915223) (xy 108.747654 56.926094) (xy 108.854097 57.072601) (xy 108.982149 57.200653) - (xy 109.128656 57.307096) (xy 109.290011 57.389311) (xy 109.462241 57.445271) (xy 109.533786 57.456602) - (xy 109.641101 57.4736) (xy 109.641104 57.4736) (xy 109.822199 57.4736) (xy 109.911627 57.459435) - (xy 110.001059 57.445271) (xy 110.173289 57.389311) (xy 110.334644 57.307096) (xy 110.481151 57.200653) - (xy 110.609203 57.072601) (xy 110.715646 56.926094) (xy 110.797861 56.764739) (xy 110.853821 56.592509) - (xy 110.867985 56.503077) (xy 110.88215 56.413649) (xy 110.88215 56.23255) (xy 111.12115 56.23255) - (xy 111.12115 56.413649) (xy 111.149478 56.592506) (xy 111.205438 56.764737) (xy 111.282114 56.915223) - (xy 111.287654 56.926094) (xy 111.394097 57.072601) (xy 111.522149 57.200653) (xy 111.668656 57.307096) - (xy 111.830011 57.389311) (xy 112.002241 57.445271) (xy 112.073786 57.456602) (xy 112.181101 57.4736) - (xy 112.181104 57.4736) (xy 112.362199 57.4736) (xy 112.451627 57.459435) (xy 112.541059 57.445271) - (xy 112.713289 57.389311) (xy 112.874644 57.307096) (xy 113.021151 57.200653) (xy 113.149203 57.072601) - (xy 113.255646 56.926094) (xy 113.337861 56.764739) (xy 113.393821 56.592509) (xy 113.407985 56.503077) - (xy 113.42215 56.413649) (xy 113.42215 56.23255) (xy 113.66115 56.23255) (xy 113.66115 56.413649) - (xy 113.689478 56.592506) (xy 113.745438 56.764737) (xy 113.822114 56.915223) (xy 113.827654 56.926094) - (xy 113.934097 57.072601) (xy 114.062149 57.200653) (xy 114.208656 57.307096) (xy 114.370011 57.389311) - (xy 114.542241 57.445271) (xy 114.613786 57.456602) (xy 114.721101 57.4736) (xy 114.721104 57.4736) - (xy 114.902199 57.4736) (xy 114.991627 57.459435) (xy 115.081059 57.445271) (xy 115.253289 57.389311) - (xy 115.414644 57.307096) (xy 115.561151 57.200653) (xy 115.689203 57.072601) (xy 115.795646 56.926094) - (xy 115.877861 56.764739) (xy 115.933821 56.592509) (xy 115.947985 56.503077) (xy 115.96215 56.413649) - (xy 115.96215 56.23255) (xy 116.20115 56.23255) (xy 116.20115 56.413649) (xy 116.229478 56.592506) - (xy 116.285438 56.764737) (xy 116.362114 56.915223) (xy 116.367654 56.926094) (xy 116.474097 57.072601) - (xy 116.602149 57.200653) (xy 116.748656 57.307096) (xy 116.910011 57.389311) (xy 117.082241 57.445271) - (xy 117.153786 57.456602) (xy 117.261101 57.4736) (xy 117.261104 57.4736) (xy 117.442199 57.4736) - (xy 117.531627 57.459435) (xy 117.621059 57.445271) (xy 117.793289 57.389311) (xy 117.954644 57.307096) - (xy 118.101151 57.200653) (xy 118.229203 57.072601) (xy 118.335646 56.926094) (xy 118.417861 56.764739) - (xy 118.473821 56.592509) (xy 118.487985 56.503077) (xy 118.50215 56.413649) (xy 118.50215 56.23255) - (xy 118.483264 56.113312) (xy 118.473821 56.053691) (xy 118.417861 55.881461) (xy 118.335646 55.720106) - (xy 118.229203 55.573599) (xy 118.101151 55.445547) (xy 117.954644 55.339104) (xy 117.954643 55.339103) - (xy 117.954641 55.339102) (xy 117.793287 55.256888) (xy 117.621056 55.200928) (xy 117.442199 55.1726) - (xy 117.442196 55.1726) (xy 117.261104 55.1726) (xy 117.261101 55.1726) (xy 117.082243 55.200928) - (xy 116.910012 55.256888) (xy 116.748658 55.339102) (xy 116.711112 55.366381) (xy 116.602149 55.445547) - (xy 116.474097 55.573599) (xy 116.443625 55.61554) (xy 116.367652 55.720108) (xy 116.285438 55.881462) - (xy 116.229478 56.053693) (xy 116.20115 56.23255) (xy 115.96215 56.23255) (xy 115.943264 56.113312) - (xy 115.933821 56.053691) (xy 115.877861 55.881461) (xy 115.795646 55.720106) (xy 115.689203 55.573599) - (xy 115.561151 55.445547) (xy 115.414644 55.339104) (xy 115.414643 55.339103) (xy 115.414641 55.339102) - (xy 115.253287 55.256888) (xy 115.081056 55.200928) (xy 114.902199 55.1726) (xy 114.902196 55.1726) - (xy 114.721104 55.1726) (xy 114.721101 55.1726) (xy 114.542243 55.200928) (xy 114.370012 55.256888) - (xy 114.208658 55.339102) (xy 114.171112 55.366381) (xy 114.062149 55.445547) (xy 113.934097 55.573599) - (xy 113.903625 55.61554) (xy 113.827652 55.720108) (xy 113.745438 55.881462) (xy 113.689478 56.053693) - (xy 113.66115 56.23255) (xy 113.42215 56.23255) (xy 113.403264 56.113312) (xy 113.393821 56.053691) - (xy 113.337861 55.881461) (xy 113.255646 55.720106) (xy 113.149203 55.573599) (xy 113.021151 55.445547) - (xy 112.874644 55.339104) (xy 112.874643 55.339103) (xy 112.874641 55.339102) (xy 112.713287 55.256888) - (xy 112.541056 55.200928) (xy 112.362199 55.1726) (xy 112.362196 55.1726) (xy 112.181104 55.1726) - (xy 112.181101 55.1726) (xy 112.002243 55.200928) (xy 111.830012 55.256888) (xy 111.668658 55.339102) - (xy 111.631112 55.366381) (xy 111.522149 55.445547) (xy 111.394097 55.573599) (xy 111.363625 55.61554) - (xy 111.287652 55.720108) (xy 111.205438 55.881462) (xy 111.149478 56.053693) (xy 111.12115 56.23255) - (xy 110.88215 56.23255) (xy 110.863264 56.113312) (xy 110.853821 56.053691) (xy 110.797861 55.881461) - (xy 110.715646 55.720106) (xy 110.609203 55.573599) (xy 110.481151 55.445547) (xy 110.334644 55.339104) - (xy 110.334643 55.339103) (xy 110.334641 55.339102) (xy 110.173287 55.256888) (xy 110.001056 55.200928) - (xy 109.822199 55.1726) (xy 109.822196 55.1726) (xy 109.641104 55.1726) (xy 109.641101 55.1726) - (xy 109.462243 55.200928) (xy 109.290012 55.256888) (xy 109.128658 55.339102) (xy 109.091112 55.366381) - (xy 108.982149 55.445547) (xy 108.854097 55.573599) (xy 108.823625 55.61554) (xy 108.747652 55.720108) - (xy 108.665438 55.881462) (xy 108.609478 56.053693) (xy 108.58115 56.23255) (xy 108.342149 56.23255) - (xy 108.342149 55.428236) (xy 108.339235 55.403109) (xy 108.293856 55.300335) (xy 108.214415 55.220894) - (xy 108.111641 55.175515) (xy 108.11164 55.175514) (xy 108.111638 55.175514) (xy 108.086518 55.1726) - (xy 106.296789 55.1726) (xy 106.296786 55.172601) (xy 106.271659 55.175514) (xy 106.168885 55.220894) - (xy 106.089444 55.300335) (xy 106.044064 55.403111) (xy 106.04115 55.42823) (xy 94.04215 55.42823) - (xy 94.04215 51.296849) (xy 109.84165 51.296849) (xy 109.84165 51.50935) (xy 109.87489 51.719221) - (xy 109.940554 51.921315) (xy 110.037026 52.110653) (xy 110.03703 52.110659) (xy 110.076378 52.164816) - (xy 110.076379 52.164816) (xy 110.708687 51.532507) (xy 110.725725 51.596093) (xy 110.791551 51.710107) - (xy 110.884643 51.803199) (xy 110.998657 51.869025) (xy 111.062239 51.886062) (xy 110.429932 52.518369) - (xy 110.429932 52.51837) (xy 110.48409 52.557719) (xy 110.484096 52.557723) (xy 110.673434 52.654195) - (xy 110.875528 52.719859) (xy 111.0854 52.7531) (xy 111.2979 52.7531) (xy 111.507771 52.719859) - (xy 111.709865 52.654195) (xy 111.899206 52.55772) (xy 111.953366 52.51837) (xy 111.321058 51.886062) - (xy 111.384643 51.869025) (xy 111.498657 51.803199) (xy 111.591749 51.710107) (xy 111.657575 51.596093) - (xy 111.674612 51.532508) (xy 112.30692 52.164816) (xy 112.34627 52.110656) (xy 112.442745 51.921315) - (xy 112.508409 51.719221) (xy 112.54165 51.50935) (xy 112.54165 51.296849) (xy 112.508409 51.086978) - (xy 112.442745 50.884884) (xy 112.346273 50.695546) (xy 112.346269 50.69554) (xy 112.30692 50.641382) - (xy 112.306919 50.641382) (xy 111.674612 51.273689) (xy 111.657575 51.210107) (xy 111.591749 51.096093) - (xy 111.498657 51.003001) (xy 111.384643 50.937175) (xy 111.321057 50.920137) (xy 111.953366 50.287829) - (xy 111.953366 50.287828) (xy 111.899209 50.24848) (xy 111.899203 50.248476) (xy 111.709865 50.152004) - (xy 111.618665 50.122372) (xy 111.569165 50.086408) (xy 111.550258 50.028217) (xy 111.569165 49.970026) - (xy 111.618663 49.934062) (xy 111.618667 49.934062) (xy 111.618668 49.934062) (xy 111.633283 49.929313) - (xy 111.633283 49.929312) (xy 111.633289 49.929311) (xy 111.794644 49.847096) (xy 111.941151 49.740653) - (xy 112.069203 49.612601) (xy 112.175646 49.466094) (xy 112.257861 49.304739) (xy 112.313821 49.132509) - (xy 112.327985 49.043077) (xy 112.34215 48.953649) (xy 112.34215 48.77255) (xy 112.313821 48.593693) - (xy 112.313821 48.593691) (xy 112.257861 48.421461) (xy 112.25786 48.421459) (xy 112.257858 48.421453) - (xy 112.215948 48.339201) (xy 112.215946 48.339199) (xy 112.196352 48.300743) (xy 114.15765 48.300743) - (xy 114.15765 48.458857) (xy 114.198573 48.611584) (xy 114.27763 48.748516) (xy 114.389434 48.86032) - (xy 114.526366 48.939377) (xy 114.679093 48.9803) (xy 114.679095 48.9803) (xy 114.837205 48.9803) - (xy 114.837207 48.9803) (xy 114.989934 48.939377) (xy 115.126866 48.86032) (xy 115.23867 48.748516) - (xy 115.317727 48.611584) (xy 115.35865 48.458857) (xy 115.35865 48.300743) (xy 115.317727 48.148016) - (xy 115.23867 48.011084) (xy 115.126866 47.89928) (xy 114.989934 47.820223) (xy 114.837207 47.7793) - (xy 114.679093 47.7793) (xy 114.526366 47.820223) (xy 114.389434 47.89928) (xy 114.27763 48.011084) - (xy 114.198573 48.148016) (xy 114.15765 48.300743) (xy 112.196352 48.300743) (xy 112.175647 48.260108) - (xy 112.175646 48.260106) (xy 112.069203 48.113599) (xy 111.941151 47.985547) (xy 111.794644 47.879104) - (xy 111.794643 47.879103) (xy 111.794641 47.879102) (xy 111.633287 47.796888) (xy 111.461056 47.740928) - (xy 111.282199 47.7126) (xy 111.282196 47.7126) (xy 111.101104 47.7126) (xy 111.101101 47.7126) - (xy 110.922243 47.740928) (xy 110.750012 47.796888) (xy 110.588658 47.879102) (xy 110.570906 47.892) - (xy 110.442149 47.985547) (xy 110.314097 48.113599) (xy 110.289092 48.148016) (xy 110.207652 48.260108) - (xy 110.125438 48.421462) (xy 110.069478 48.593693) (xy 110.04115 48.77255) (xy 110.04115 48.953649) - (xy 110.069478 49.132506) (xy 110.125438 49.304737) (xy 110.18937 49.430211) (xy 110.207654 49.466094) - (xy 110.314097 49.612601) (xy 110.442149 49.740653) (xy 110.588656 49.847096) (xy 110.750011 49.929311) - (xy 110.761133 49.932924) (xy 110.764633 49.934062) (xy 110.814133 49.970026) (xy 110.833041 50.028216) - (xy 110.814134 50.086407) (xy 110.764635 50.122371) (xy 110.764634 50.122372) (xy 110.673434 50.152004) - (xy 110.484096 50.248476) (xy 110.484092 50.248478) (xy 110.429932 50.287828) (xy 111.062241 50.920137) - (xy 110.998657 50.937175) (xy 110.884643 51.003001) (xy 110.791551 51.096093) (xy 110.725725 51.210107) - (xy 110.708687 51.273691) (xy 110.076378 50.641382) (xy 110.037028 50.695542) (xy 110.037026 50.695546) - (xy 109.940554 50.884884) (xy 109.87489 51.086978) (xy 109.84165 51.296849) (xy 94.04215 51.296849) - (xy 94.04215 46.869143) (xy 94.061057 46.810952) (xy 94.110557 46.774988) (xy 94.171743 46.774988) - (xy 94.211151 46.799137) (xy 94.215634 46.80362) (xy 94.352566 46.882677) (xy 94.505293 46.9236) - (xy 94.505295 46.9236) (xy 94.663405 46.9236) (xy 94.663407 46.9236) (xy 94.816134 46.882677) (xy 94.953066 46.80362) - (xy 95.06487 46.691816) (xy 95.143927 46.554884) (xy 95.18485 46.402157) (xy 95.18485 46.244043) - (xy 95.143927 46.091316) (xy 95.06487 45.954384) (xy 94.953066 45.84258) (xy 94.816134 45.763523) - (xy 94.663407 45.7226) (xy 94.505293 45.7226) (xy 94.352566 45.763523) (xy 94.215634 45.84258) (xy 94.211151 45.847062) - (xy 94.156637 45.874838) (xy 94.096205 45.865267) (xy 94.05294 45.822002) (xy 94.04215 45.777057) - (xy 94.04215 45.554993) (xy 97.04115 45.554993) (xy 97.04115 47.091206) (xy 97.051773 47.179665) - (xy 97.107287 47.320439) (xy 97.107288 47.320441) (xy 97.107289 47.320442) (xy 97.198728 47.441022) - (xy 97.319308 47.532461) (xy 97.319309 47.532461) (xy 97.31931 47.532462) (xy 97.336678 47.539311) - (xy 97.460086 47.587977) (xy 97.548548 47.5986) (xy 97.54855 47.5986) (xy 98.83475 47.5986) (xy 98.834752 47.5986) - (xy 98.923214 47.587977) (xy 99.063992 47.532461) (xy 99.184572 47.441022) (xy 99.276011 47.320442) - (xy 99.331527 47.179664) (xy 99.334262 47.156882) (xy 99.359971 47.101362) (xy 99.413406 47.071556) - (xy 99.474155 47.07885) (xy 99.519014 47.120458) (xy 99.520765 47.12374) (xy 99.537023 47.155648) - (xy 99.537024 47.15565) (xy 99.661927 47.327564) (xy 99.812185 47.477822) (xy 99.984097 47.602724) - (xy 100.173434 47.699195) (xy 100.375527 47.764858) (xy 100.441649 47.775331) (xy 100.44165 47.77533) - (xy 100.44165 46.727245) (xy 100.508307 46.76573) (xy 100.629115 46.7981) (xy 100.754185 46.7981) - (xy 100.874993 46.76573) (xy 100.94165 46.727245) (xy 100.94165 47.775331) (xy 101.007772 47.764858) - (xy 101.209865 47.699195) (xy 101.399202 47.602724) (xy 101.571114 47.477822) (xy 101.721372 47.327564) - (xy 101.846274 47.155652) (xy 101.942747 46.966312) (xy 101.955218 46.927928) (xy 101.991181 46.878427) - (xy 102.049371 46.859519) (xy 102.107562 46.878425) (xy 102.137582 46.913573) (xy 102.20765 47.051088) - (xy 102.207651 47.05109) (xy 102.207652 47.051091) (xy 102.207654 47.051094) (xy 102.314097 47.197601) - (xy 102.442149 47.325653) (xy 102.588656 47.432096) (xy 102.750011 47.514311) (xy 102.922241 47.570271) - (xy 102.993786 47.581602) (xy 103.101101 47.5986) (xy 103.101104 47.5986) (xy 103.282199 47.5986) - (xy 103.371627 47.584435) (xy 103.461059 47.570271) (xy 103.633289 47.514311) (xy 103.794644 47.432096) - (xy 103.941151 47.325653) (xy 104.069203 47.197601) (xy 104.175646 47.051094) (xy 104.257861 46.889739) - (xy 104.313821 46.717509) (xy 104.33819 46.563649) (xy 104.34215 46.538649) (xy 104.34215 46.10755) - (xy 104.54115 46.10755) (xy 104.54115 46.538649) (xy 104.569478 46.717506) (xy 104.625438 46.889737) - (xy 104.707651 47.05109) (xy 104.707654 47.051094) (xy 104.814097 47.197601) (xy 104.942149 47.325653) - (xy 105.088656 47.432096) (xy 105.250011 47.514311) (xy 105.422241 47.570271) (xy 105.493786 47.581602) - (xy 105.601101 47.5986) (xy 105.601104 47.5986) (xy 105.782199 47.5986) (xy 105.871627 47.584435) - (xy 105.961059 47.570271) (xy 106.133289 47.514311) (xy 106.294644 47.432096) (xy 106.441151 47.325653) - (xy 106.569203 47.197601) (xy 106.675646 47.051094) (xy 106.757861 46.889739) (xy 106.813821 46.717509) - (xy 106.83819 46.563649) (xy 106.84215 46.538649) (xy 106.84215 46.10755) (xy 106.813821 45.928693) - (xy 106.813821 45.928691) (xy 106.757861 45.756461) (xy 106.675646 45.595106) (xy 106.569203 45.448599) - (xy 106.548834 45.42823) (xy 110.04115 45.42823) (xy 110.04115 47.21796) (xy 110.041151 47.217963) - (xy 110.044064 47.24309) (xy 110.069406 47.300485) (xy 110.089444 47.345865) (xy 110.168885 47.425306) - (xy 110.271659 47.470685) (xy 110.296785 47.4736) (xy 112.086514 47.473599) (xy 112.111641 47.470685) - (xy 112.214415 47.425306) (xy 112.293856 47.345865) (xy 112.339235 47.243091) (xy 112.34215 47.217965) - (xy 112.342149 45.554993) (xy 115.04115 45.554993) (xy 115.04115 47.091206) (xy 115.051773 47.179665) - (xy 115.107287 47.320439) (xy 115.107288 47.320441) (xy 115.107289 47.320442) (xy 115.198728 47.441022) - (xy 115.319308 47.532461) (xy 115.319309 47.532461) (xy 115.31931 47.532462) (xy 115.336678 47.539311) - (xy 115.460086 47.587977) (xy 115.548548 47.5986) (xy 115.54855 47.5986) (xy 116.83475 47.5986) - (xy 116.834752 47.5986) (xy 116.923214 47.587977) (xy 117.063992 47.532461) (xy 117.184572 47.441022) - (xy 117.276011 47.320442) (xy 117.331527 47.179664) (xy 117.34215 47.091202) (xy 117.34215 45.554998) - (xy 117.331527 45.466536) (xy 117.276011 45.325758) (xy 117.184572 45.205178) (xy 117.063992 45.113739) - (xy 117.063991 45.113738) (xy 117.063989 45.113737) (xy 116.923215 45.058223) (xy 116.834756 45.0476) - (xy 116.834752 45.0476) (xy 115.548548 45.0476) (xy 115.548543 45.0476) (xy 115.460084 45.058223) - (xy 115.31931 45.113737) (xy 115.319306 45.11374) (xy 115.198731 45.205175) (xy 115.198725 45.205181) - (xy 115.10729 45.325756) (xy 115.107287 45.32576) (xy 115.051773 45.466534) (xy 115.04115 45.554993) - (xy 112.342149 45.554993) (xy 112.342149 45.428236) (xy 112.339235 45.403109) (xy 112.293856 45.300335) - (xy 112.214415 45.220894) (xy 112.111641 45.175515) (xy 112.11164 45.175514) (xy 112.111638 45.175514) - (xy 112.086518 45.1726) (xy 110.296789 45.1726) (xy 110.296786 45.172601) (xy 110.271659 45.175514) - (xy 110.168885 45.220894) (xy 110.089444 45.300335) (xy 110.044064 45.403111) (xy 110.04115 45.42823) - (xy 106.548834 45.42823) (xy 106.441151 45.320547) (xy 106.294644 45.214104) (xy 106.294643 45.214103) - (xy 106.294641 45.214102) (xy 106.133287 45.131888) (xy 105.961056 45.075928) (xy 105.782199 45.0476) - (xy 105.782196 45.0476) (xy 105.601104 45.0476) (xy 105.601101 45.0476) (xy 105.422243 45.075928) - (xy 105.250012 45.131888) (xy 105.088658 45.214102) (xy 105.07931 45.220894) (xy 104.942149 45.320547) - (xy 104.814097 45.448599) (xy 104.778598 45.49746) (xy 104.707652 45.595108) (xy 104.625438 45.756462) - (xy 104.569478 45.928693) (xy 104.54115 46.10755) (xy 104.34215 46.10755) (xy 104.313821 45.928693) - (xy 104.313821 45.928691) (xy 104.257861 45.756461) (xy 104.175646 45.595106) (xy 104.069203 45.448599) - (xy 103.941151 45.320547) (xy 103.794644 45.214104) (xy 103.794643 45.214103) (xy 103.794641 45.214102) - (xy 103.633287 45.131888) (xy 103.461056 45.075928) (xy 103.282199 45.0476) (xy 103.282196 45.0476) - (xy 103.101104 45.0476) (xy 103.101101 45.0476) (xy 102.922243 45.075928) (xy 102.750012 45.131888) - (xy 102.588658 45.214102) (xy 102.57931 45.220894) (xy 102.442149 45.320547) (xy 102.314097 45.448599) - (xy 102.278598 45.49746) (xy 102.207651 45.595109) (xy 102.20765 45.595111) (xy 102.137582 45.732626) - (xy 102.094317 45.77589) (xy 102.033885 45.785461) (xy 101.979369 45.757683) (xy 101.955218 45.718272) - (xy 101.942746 45.679886) (xy 101.846274 45.490547) (xy 101.721372 45.318635) (xy 101.571114 45.168377) - (xy 101.399202 45.043475) (xy 101.209865 44.947004) (xy 101.00777 44.88134) (xy 100.94165 44.870867) - (xy 100.94165 45.918954) (xy 100.874993 45.88047) (xy 100.754185 45.8481) (xy 100.629115 45.8481) - (xy 100.508307 45.88047) (xy 100.44165 45.918954) (xy 100.44165 44.870868) (xy 100.441649 44.870867) - (xy 100.37553 44.88134) (xy 100.375528 44.88134) (xy 100.173434 44.947004) (xy 99.984097 45.043475) - (xy 99.812185 45.168377) (xy 99.661927 45.318635) (xy 99.537025 45.490548) (xy 99.520765 45.52246) - (xy 99.477499 45.565724) (xy 99.417067 45.575294) (xy 99.362551 45.547515) (xy 99.334775 45.492998) - (xy 99.334262 45.489315) (xy 99.332627 45.4757) (xy 99.331527 45.466536) (xy 99.276011 45.325758) - (xy 99.184572 45.205178) (xy 99.063992 45.113739) (xy 99.063991 45.113738) (xy 99.063989 45.113737) - (xy 98.923215 45.058223) (xy 98.834756 45.0476) (xy 98.834752 45.0476) (xy 97.548548 45.0476) (xy 97.548543 45.0476) - (xy 97.460084 45.058223) (xy 97.31931 45.113737) (xy 97.319306 45.11374) (xy 97.198731 45.205175) - (xy 97.198725 45.205181) (xy 97.10729 45.325756) (xy 97.107287 45.32576) (xy 97.051773 45.466534) - (xy 97.04115 45.554993) (xy 94.04215 45.554993) (xy 94.04215 42.9326) (xy 94.061057 42.874409) (xy 94.110557 42.838445) - (xy 94.14115 42.8336) (xy 123.094749 42.8336) (xy 123.15294 42.852507) (xy 123.164753 42.862596) - (xy 126.012154 45.709996) (xy 126.039931 45.764513) (xy 126.04115 45.78) (xy 126.04115 47.116206) - (xy 126.051773 47.204665) (xy 126.107287 47.345439) (xy 126.107288 47.345441) (xy 126.107289 47.345442) - (xy 126.198728 47.466022) (xy 126.319308 47.557461) (xy 126.319309 47.557461) (xy 126.31931 47.557462) - (xy 126.389697 47.585219) (xy 126.460086 47.612977) (xy 126.548548 47.6236) (xy 126.54855 47.6236) - (xy 127.83475 47.6236) (xy 127.834752 47.6236) (xy 127.923214 47.612977) (xy 128.063992 47.557461) - (xy 128.184572 47.466022) (xy 128.276011 47.345442) (xy 128.331527 47.204664) (xy 128.334262 47.181882) - (xy 128.359971 47.126362) (xy 128.413406 47.096556) (xy 128.474155 47.10385) (xy 128.519014 47.145458) - (xy 128.520765 47.14874) (xy 128.537023 47.180648) (xy 128.537024 47.18065) (xy 128.661927 47.352564) - (xy 128.812185 47.502822) (xy 128.984097 47.627724) (xy 129.173434 47.724195) (xy 129.375527 47.789858) - (xy 129.441649 47.800331) (xy 129.44165 47.80033) (xy 129.44165 46.756112) (xy 129.498657 46.789025) - (xy 129.625824 46.8231) (xy 129.757476 46.8231) (xy 129.884643 46.789025) (xy 129.94165 46.756112) - (xy 129.94165 47.800331) (xy 130.007772 47.789858) (xy 130.209865 47.724195) (xy 130.399202 47.627724) - (xy 130.571114 47.502822) (xy 130.721372 47.352564) (xy 130.846274 47.180652) (xy 130.942745 46.991315) - (xy 131.008409 46.789221) (xy 131.04165 46.57935) (xy 131.04165 46.573101) (xy 131.041649 46.5731) - (xy 130.124662 46.5731) (xy 130.157575 46.516093) (xy 130.19165 46.388926) (xy 130.19165 46.257274) - (xy 130.157575 46.130107) (xy 130.124662 46.0731) (xy 131.041649 46.0731) (xy 131.04165 46.073099) - (xy 131.04165 46.066849) (xy 131.008409 45.856978) (xy 130.942745 45.654884) (xy 130.900506 45.571984) - (xy 130.87911 45.529993) (xy 134.64115 45.529993) (xy 134.64115 47.116206) (xy 134.651773 47.204665) - (xy 134.707287 47.345439) (xy 134.707288 47.345441) (xy 134.707289 47.345442) (xy 134.798728 47.466022) - (xy 134.919308 47.557461) (xy 134.919309 47.557461) (xy 134.91931 47.557462) (xy 134.989697 47.585219) - (xy 135.060086 47.612977) (xy 135.148548 47.6236) (xy 135.14855 47.6236) (xy 136.43475 47.6236) - (xy 136.434752 47.6236) (xy 136.523214 47.612977) (xy 136.663992 47.557461) (xy 136.784572 47.466022) - (xy 136.876011 47.345442) (xy 136.931527 47.204664) (xy 136.94215 47.116202) (xy 136.94215 46.08255) - (xy 137.14115 46.08255) (xy 137.14115 46.563649) (xy 137.169478 46.742506) (xy 137.225438 46.914737) - (xy 137.305341 47.071556) (xy 137.307654 47.076094) (xy 137.414097 47.222601) (xy 137.542149 47.350653) - (xy 137.688656 47.457096) (xy 137.850011 47.539311) (xy 138.022241 47.595271) (xy 138.069298 47.602724) - (xy 138.201101 47.6236) (xy 138.201104 47.6236) (xy 138.382199 47.6236) (xy 138.471627 47.609435) - (xy 138.561059 47.595271) (xy 138.733289 47.539311) (xy 138.894644 47.457096) (xy 139.041151 47.350653) - (xy 139.169203 47.222601) (xy 139.275646 47.076094) (xy 139.357861 46.914739) (xy 139.413821 46.742509) - (xy 139.434055 46.614757) (xy 139.44215 46.563649) (xy 139.44215 46.08255) (xy 139.430048 46.006141) - (xy 139.428623 45.997143) (xy 167.79425 45.997143) (xy 167.79425 46.155257) (xy 167.835173 46.307984) - (xy 167.91423 46.444916) (xy 168.026034 46.55672) (xy 168.162966 46.635777) (xy 168.315693 46.6767) - (xy 168.315695 46.6767) (xy 168.473805 46.6767) (xy 168.473807 46.6767) (xy 168.626534 46.635777) - (xy 168.763466 46.55672) (xy 168.87527 46.444916) (xy 168.954327 46.307984) (xy 168.977087 46.223043) - (xy 176.94475 46.223043) (xy 176.94475 46.381157) (xy 176.985673 46.533884) (xy 177.06473 46.670816) - (xy 177.176534 46.78262) (xy 177.313466 46.861677) (xy 177.466193 46.9026) (xy 177.466195 46.9026) - (xy 177.624305 46.9026) (xy 177.624307 46.9026) (xy 177.777034 46.861677) (xy 177.913966 46.78262) - (xy 178.02577 46.670816) (xy 178.104827 46.533884) (xy 178.14575 46.381157) (xy 178.14575 46.223043) - (xy 178.104827 46.070316) (xy 178.02577 45.933384) (xy 177.913966 45.82158) (xy 177.777034 45.742523) - (xy 177.624307 45.7016) (xy 177.466193 45.7016) (xy 177.313466 45.742523) (xy 177.176534 45.82158) - (xy 177.06473 45.933384) (xy 176.985673 46.070316) (xy 176.94475 46.223043) (xy 168.977087 46.223043) - (xy 168.99525 46.155257) (xy 168.99525 45.997143) (xy 168.954327 45.844416) (xy 168.87527 45.707484) - (xy 168.763466 45.59568) (xy 168.626534 45.516623) (xy 168.473807 45.4757) (xy 168.315693 45.4757) - (xy 168.162966 45.516623) (xy 168.026034 45.59568) (xy 167.91423 45.707484) (xy 167.835173 45.844416) - (xy 167.79425 45.997143) (xy 139.428623 45.997143) (xy 139.417781 45.928693) (xy 139.413821 45.903691) - (xy 139.357861 45.731461) (xy 139.275646 45.570106) (xy 139.169203 45.423599) (xy 139.041151 45.295547) - (xy 139.041147 45.295544) (xy 139.017914 45.278664) (xy 139.017913 45.278664) (xy 138.912132 45.20181) + (xy 174.82808 91.833114) (xy 174.807485 91.818151) (xy 174.807477 91.818146) (xy 174.642693 91.734185) + (xy 174.615643 91.725396) (xy 174.566143 91.689432) (xy 174.547236 91.631241) (xy 174.566143 91.57305) + (xy 174.591232 91.548927) (xy 174.717875 91.464308) (xy 174.832858 91.349325) (xy 174.923198 91.214121) + (xy 174.985426 91.063889) (xy 175.01715 90.904405) (xy 175.01715 90.741795) (xy 174.985426 90.582311) + (xy 174.940559 90.473993) (xy 174.923199 90.432081) (xy 174.916223 90.421641) (xy 174.832858 90.296875) + (xy 174.717875 90.181892) (xy 174.582671 90.091552) (xy 174.58267 90.091551) (xy 174.582668 90.09155) + (xy 174.43244 90.029324) (xy 174.272955 89.9976) (xy 174.110345 89.9976) (xy 174.110344 89.9976) + (xy 173.950859 90.029324) (xy 173.800631 90.09155) (xy 173.665428 90.181889) (xy 173.550439 90.296878) + (xy 173.4601 90.432081) (xy 173.397874 90.582309) (xy 173.36615 90.741794) (xy 173.36615 90.904405) + (xy 173.397874 91.06389) (xy 173.4601 91.214118) (xy 173.5271 91.314392) (xy 173.550442 91.349325) + (xy 173.665425 91.464308) (xy 173.757556 91.525868) (xy 173.792064 91.548925) (xy 173.829944 91.596975) + (xy 173.832346 91.658113) (xy 173.798354 91.708987) (xy 173.767657 91.725395) (xy 173.74061 91.734183) + (xy 173.575818 91.818148) (xy 173.555218 91.833114) (xy 174.145204 92.4231) (xy 174.138989 92.4231) + (xy 174.037256 92.450359) (xy 173.946044 92.50302) (xy 173.87157 92.577494) (xy 173.818909 92.668706) + (xy 173.79165 92.770439) (xy 173.79165 92.776654) (xy 173.201664 92.186668) (xy 173.186698 92.207268) + (xy 173.102734 92.372058) (xy 173.045582 92.547956) (xy 173.01665 92.730622) (xy 164.040984 92.730622) + (xy 164.049666 92.728895) (xy 164.149811 92.687413) (xy 164.213547 92.661013) (xy 164.2972 92.605117) + (xy 164.329706 92.583398) (xy 164.329707 92.583397) (xy 164.337434 92.578234) (xy 164.361036 92.562464) + (xy 164.499464 92.424035) (xy 164.598013 92.276546) (xy 164.665895 92.112666) (xy 164.7005 91.938692) + (xy 164.7005 91.761308) (xy 164.665895 91.587334) (xy 164.598013 91.423453) (xy 164.598011 91.423451) + (xy 164.598009 91.423445) (xy 164.541479 91.338844) (xy 164.499464 91.275964) (xy 164.374036 91.150536) + (xy 164.327507 91.119446) (xy 164.226554 91.05199) (xy 164.226545 91.051986) (xy 164.062664 90.984104) + (xy 163.888694 90.9495) (xy 163.888692 90.9495) (xy 163.711308 90.9495) (xy 163.711305 90.9495) + (xy 163.666887 90.958335) (xy 163.655512 90.960598) (xy 163.6362 90.9625) (xy 142.824758 90.9625) + (xy 142.81716 90.960031) (xy 142.809271 90.961281) (xy 142.788615 90.950756) (xy 142.766567 90.943593) + (xy 142.754754 90.933504) (xy 142.628185 90.806935) (xy 138.682299 86.861049) (xy 134.664486 82.843236) + (xy 134.597065 82.798187) (xy 134.597064 82.798186) (xy 134.517004 82.74469) (xy 134.516992 82.744684) + (xy 134.428749 82.708134) (xy 134.353119 82.676806) (xy 134.353113 82.676804) (xy 134.179144 82.6422) + (xy 134.179142 82.6422) (xy 134.179141 82.6422) (xy 131.230659 82.6422) (xy 131.230656 82.6422) + (xy 131.056684 82.676806) (xy 131.056682 82.676806) (xy 130.892805 82.744685) (xy 130.892804 82.744685) + (xy 130.745315 82.843235) (xy 130.619885 82.968665) (xy 130.521335 83.116154) (xy 130.521335 83.116155) + (xy 130.453456 83.280032) (xy 130.453456 83.280034) (xy 130.41885 83.454006) (xy 130.41885 83.631393) + (xy 130.453456 83.805365) (xy 130.453456 83.805367) (xy 130.521335 83.969244) (xy 130.521335 83.969245) + (xy 130.603059 84.091552) (xy 130.619886 84.116735) (xy 130.745315 84.242164) (xy 130.892803 84.340713) + (xy 130.892804 84.340713) (xy 130.892805 84.340714) (xy 130.896615 84.342292) (xy 131.056684 84.408594) + (xy 131.230659 84.4432) (xy 133.676442 84.4432) (xy 133.734633 84.462107) (xy 133.746446 84.472196) + (xy 141.836714 92.562464) (xy 141.868043 92.583397) (xy 141.984203 92.661013) (xy 141.988329 92.662722) + (xy 141.996111 92.667854) (xy 142.012485 92.688369) (xy 142.03068 92.707291) (xy 142.031328 92.711976) + (xy 142.03428 92.715675) (xy 142.035468 92.741898) (xy 142.039066 92.767899) (xy 142.036835 92.772071) + (xy 142.03705 92.776797) (xy 142.022603 92.798703) (xy 142.010227 92.821861) (xy 142.005968 92.823926) + (xy 142.003365 92.827875) (xy 141.978802 92.837105) (xy 141.955177 92.848566) (xy 141.946762 92.849145) + (xy 141.94609 92.849398) (xy 141.94549 92.849232) (xy 141.941607 92.8495) (xy 141.021169 92.8495) + (xy 140.962978 92.830593) (xy 140.927014 92.781093) (xy 140.927014 92.719907) (xy 140.935433 92.701) + (xy 140.962747 92.65369) (xy 140.962747 92.653688) (xy 140.962749 92.653686) (xy 140.99345 92.539109) + (xy 140.99345 92.420491) (xy 140.962749 92.305914) (xy 140.962747 92.305911) (xy 140.962747 92.305909) + (xy 140.903442 92.203191) (xy 140.90344 92.203189) (xy 140.903439 92.203187) (xy 140.819563 92.119311) + (xy 140.81956 92.119309) (xy 140.819558 92.119307) (xy 140.716839 92.060002) (xy 140.71684 92.060002) + (xy 140.703301 92.056374) (xy 140.602259 92.0293) (xy 140.483641 92.0293) (xy 140.427075 92.044457) + (xy 140.369059 92.060002) (xy 140.266341 92.119307) (xy 140.182457 92.203191) (xy 140.123152 92.305909) + (xy 140.111847 92.3481) (xy 140.09245 92.420491) (xy 140.09245 92.539109) (xy 140.112889 92.615389) + (xy 140.123152 92.65369) (xy 140.150467 92.701) (xy 140.163189 92.760848) (xy 140.138302 92.816744) + (xy 140.085314 92.847337) (xy 140.064731 92.8495) (xy 138.599404 92.8495) (xy 138.541213 92.830593) + (xy 138.529401 92.820504) (xy 138.491319 92.782422) (xy 138.384776 92.711234) (xy 138.266392 92.662198) + (xy 138.266387 92.662197) (xy 138.260433 92.661012) (xy 138.260433 92.661013) (xy 138.140721 92.6372) + (xy 138.140719 92.6372) (xy 135.697981 92.6372) (xy 135.697978 92.6372) (xy 135.578267 92.661013) + (xy 135.578266 92.661012) (xy 135.572312 92.662197) (xy 135.572307 92.662198) (xy 135.453923 92.711234) + (xy 135.400821 92.746716) (xy 135.34582 92.7634) (xy 131.796883 92.7634) (xy 131.741882 92.746716) + (xy 131.734671 92.741898) (xy 131.690577 92.712435) (xy 131.690576 92.712434) (xy 131.690574 92.712433) + (xy 131.572194 92.663399) (xy 131.446521 92.638401) (xy 131.446519 92.638401) (xy 131.318381 92.638401) + (xy 131.318378 92.638401) (xy 131.192706 92.663399) (xy 131.192704 92.663399) (xy 131.074327 92.712432) + (xy 131.074317 92.712437) (xy 131.031092 92.74132) (xy 130.972204 92.757928) (xy 130.9148 92.73675) + (xy 130.880808 92.685876) (xy 130.880464 92.684627) (xy 130.879521 92.681106) (xy 130.866849 92.633814) + (xy 130.866847 92.633811) (xy 130.866847 92.633809) (xy 130.807542 92.531091) (xy 130.80754 92.531089) + (xy 130.807539 92.531087) (xy 130.723663 92.447211) (xy 130.72366 92.447209) (xy 130.723658 92.447207) + (xy 130.620939 92.387902) (xy 130.62094 92.387902) (xy 130.599413 92.382134) (xy 130.506359 92.3572) + (xy 130.387741 92.3572) (xy 130.332291 92.372058) (xy 130.300897 92.38047) (xy 130.297209 92.381458) + (xy 130.236107 92.378255) (xy 130.188557 92.33975) (xy 130.172722 92.280649) (xy 130.194649 92.223528) + (xy 130.201572 92.215837) (xy 133.146414 89.270996) (xy 133.200931 89.243219) (xy 133.216418 89.242) + (xy 136.895841 89.242) (xy 136.954032 89.260907) (xy 136.965838 89.27099) (xy 137.046837 89.351989) + (xy 137.046839 89.35199) (xy 137.046841 89.351992) (xy 137.14956 89.411297) (xy 137.149561 89.411297) + (xy 137.149564 89.411299) (xy 137.264141 89.442) (xy 137.264143 89.442) (xy 137.382757 89.442) (xy 137.382759 89.442) + (xy 137.497336 89.411299) (xy 137.497338 89.411297) (xy 137.49734 89.411297) (xy 137.600058 89.351992) + (xy 137.600058 89.351991) (xy 137.600063 89.351989) (xy 137.683939 89.268113) (xy 137.683942 89.268108) + (xy 137.743247 89.16539) (xy 137.743247 89.165388) (xy 137.743249 89.165386) (xy 137.77395 89.050809) + (xy 137.77395 88.932191) (xy 137.743249 88.817614) (xy 137.743247 88.817611) (xy 137.743247 88.817609) + (xy 137.683942 88.714891) (xy 137.68394 88.714889) (xy 137.683939 88.714887) (xy 137.600063 88.631011) + (xy 137.60006 88.631009) (xy 137.600058 88.631007) (xy 137.497339 88.571702) (xy 137.49734 88.571702) + (xy 137.483801 88.568074) (xy 137.382759 88.541) (xy 137.264141 88.541) (xy 137.194017 88.559789) + (xy 137.149559 88.571702) (xy 137.046841 88.631007) (xy 137.04684 88.631008) (xy 137.046837 88.63101) + (xy 137.046837 88.631011) (xy 136.965842 88.712005) (xy 136.911328 88.739781) (xy 136.895841 88.741) + (xy 133.133009 88.741) (xy 133.133001 88.740999) (xy 133.121478 88.740999) (xy 133.021822 88.740999) + (xy 133.021821 88.740999) (xy 132.995982 88.751702) (xy 132.956719 88.767965) (xy 132.940923 88.774508) + (xy 132.929752 88.779136) (xy 132.859285 88.849604) (xy 129.728384 91.980504) (xy 129.673867 92.008281) + (xy 129.65838 92.0095) (xy 129.543841 92.0095) (xy 129.490813 92.023709) (xy 129.429259 92.040202) + (xy 129.326541 92.099507) (xy 129.242657 92.183391) (xy 129.183352 92.28611) (xy 129.180869 92.292106) + (xy 129.178579 92.291157) (xy 129.151062 92.33351) (xy 129.093935 92.355423) (xy 129.034839 92.339572) + (xy 128.996345 92.292013) (xy 128.993151 92.282178) (xy 128.992741 92.280649) (xy 128.989249 92.267614) + (xy 128.989248 92.267613) (xy 128.989248 92.267611) (xy 128.989247 92.26761) (xy 128.929942 92.164891) + (xy 128.929938 92.164886) (xy 128.848946 92.083893) (xy 128.821169 92.029376) (xy 128.81995 92.01389) + (xy 128.81995 82.420967) (xy 128.822418 82.413369) (xy 128.821169 82.405479) (xy 128.831692 82.384825) + (xy 128.838857 82.362776) (xy 128.848947 82.350963) (xy 128.897315 82.302596) (xy 128.951832 82.274819) + (xy 128.967318 82.2736) (xy 129.065265 82.2736) (xy 129.065266 82.2736) (xy 129.248901 82.237073) + (xy 129.421881 82.165422) (xy 129.421884 82.165419) (xy 129.421888 82.165418) (xy 129.468454 82.134303) + (xy 129.577558 82.061402) (xy 129.709952 81.929008) (xy 129.803486 81.789025) (xy 129.813968 81.773338) + (xy 129.813969 81.773334) (xy 129.813972 81.773331) (xy 129.871389 81.634713) (xy 129.911126 81.588189) + (xy 129.962853 81.5736) (xy 130.123179 81.5736) (xy 130.181235 81.549551) (xy 130.215247 81.535464) + (xy 130.52123 81.229481) (xy 132.08115 81.229481) (xy 132.08115 81.416718) (xy 132.117676 81.600349) + (xy 132.189327 81.773329) (xy 132.189331 81.773338) (xy 132.245965 81.858095) (xy 132.293348 81.929008) + (xy 132.425742 82.061402) (xy 132.490104 82.104407) (xy 132.581411 82.165418) (xy 132.581417 82.16542) + (xy 132.581419 82.165422) (xy 132.754399 82.237073) (xy 132.938034 82.2736) (xy 132.938035 82.2736) + (xy 133.125265 82.2736) (xy 133.125266 82.2736) (xy 133.308901 82.237073) (xy 133.481881 82.165422) + (xy 133.481884 82.165419) (xy 133.481888 82.165418) (xy 133.528454 82.134303) (xy 133.637558 82.061402) + (xy 133.769952 81.929008) (xy 133.863486 81.789025) (xy 133.873968 81.773338) (xy 133.873969 81.773334) + (xy 133.873972 81.773331) (xy 133.945623 81.600351) (xy 133.98215 81.416716) (xy 133.98215 81.229484) + (xy 133.982149 81.229481) (xy 134.62115 81.229481) (xy 134.62115 81.416718) (xy 134.657676 81.600349) + (xy 134.729327 81.773329) (xy 134.729331 81.773338) (xy 134.785965 81.858095) (xy 134.833348 81.929008) + (xy 134.965742 82.061402) (xy 135.030104 82.104407) (xy 135.121411 82.165418) (xy 135.121417 82.16542) + (xy 135.121419 82.165422) (xy 135.294399 82.237073) (xy 135.478034 82.2736) (xy 135.478035 82.2736) + (xy 135.665265 82.2736) (xy 135.665266 82.2736) (xy 135.848901 82.237073) (xy 136.021881 82.165422) + (xy 136.021884 82.165419) (xy 136.021888 82.165418) (xy 136.068454 82.134303) (xy 136.177558 82.061402) + (xy 136.309952 81.929008) (xy 136.403486 81.789025) (xy 136.413968 81.773338) (xy 136.413969 81.773334) + (xy 136.413972 81.773331) (xy 136.485623 81.600351) (xy 136.52215 81.416716) (xy 136.52215 81.229484) + (xy 136.522149 81.229481) (xy 137.16115 81.229481) (xy 137.16115 81.416718) (xy 137.197676 81.600349) + (xy 137.269327 81.773329) (xy 137.269331 81.773338) (xy 137.325965 81.858095) (xy 137.373348 81.929008) + (xy 137.505742 82.061402) (xy 137.570104 82.104407) (xy 137.661411 82.165418) (xy 137.661417 82.16542) + (xy 137.661419 82.165422) (xy 137.834399 82.237073) (xy 138.018034 82.2736) (xy 138.018035 82.2736) + (xy 138.205265 82.2736) (xy 138.205266 82.2736) (xy 138.388901 82.237073) (xy 138.561881 82.165422) + (xy 138.561884 82.165419) (xy 138.561888 82.165418) (xy 138.608454 82.134303) (xy 138.717558 82.061402) + (xy 138.849952 81.929008) (xy 138.943486 81.789025) (xy 138.953968 81.773338) (xy 138.953969 81.773334) + (xy 138.953972 81.773331) (xy 139.025623 81.600351) (xy 139.06215 81.416716) (xy 139.06215 81.229484) + (xy 139.062149 81.229481) (xy 139.70115 81.229481) (xy 139.70115 81.416718) (xy 139.737676 81.600349) + (xy 139.809327 81.773329) (xy 139.809331 81.773338) (xy 139.865965 81.858095) (xy 139.913348 81.929008) + (xy 140.045742 82.061402) (xy 140.110104 82.104407) (xy 140.201411 82.165418) (xy 140.201417 82.16542) + (xy 140.201419 82.165422) (xy 140.374399 82.237073) (xy 140.558034 82.2736) (xy 140.558035 82.2736) + (xy 140.745265 82.2736) (xy 140.745266 82.2736) (xy 140.928901 82.237073) (xy 141.101881 82.165422) + (xy 141.101884 82.165419) (xy 141.101888 82.165418) (xy 141.148454 82.134303) (xy 141.257558 82.061402) + (xy 141.389952 81.929008) (xy 141.483486 81.789025) (xy 141.493968 81.773338) (xy 141.493969 81.773334) + (xy 141.493972 81.773331) (xy 141.565623 81.600351) (xy 141.60215 81.416716) (xy 141.60215 81.229484) + (xy 141.602149 81.229481) (xy 142.24115 81.229481) (xy 142.24115 81.416718) (xy 142.277676 81.600349) + (xy 142.349327 81.773329) (xy 142.349331 81.773338) (xy 142.405965 81.858095) (xy 142.453348 81.929008) + (xy 142.585742 82.061402) (xy 142.650104 82.104407) (xy 142.741411 82.165418) (xy 142.741417 82.16542) + (xy 142.741419 82.165422) (xy 142.914399 82.237073) (xy 143.098034 82.2736) (xy 143.098035 82.2736) + (xy 143.285265 82.2736) (xy 143.285266 82.2736) (xy 143.468901 82.237073) (xy 143.641881 82.165422) + (xy 143.641884 82.165419) (xy 143.641888 82.165418) (xy 143.688454 82.134303) (xy 143.797558 82.061402) + (xy 143.929952 81.929008) (xy 144.023486 81.789025) (xy 144.033968 81.773338) (xy 144.033969 81.773334) + (xy 144.033972 81.773331) (xy 144.105623 81.600351) (xy 144.14215 81.416716) (xy 144.14215 81.229484) + (xy 144.142149 81.229481) (xy 144.78115 81.229481) (xy 144.78115 81.416718) (xy 144.817676 81.600349) + (xy 144.889327 81.773329) (xy 144.889331 81.773338) (xy 144.945965 81.858095) (xy 144.993348 81.929008) + (xy 145.125742 82.061402) (xy 145.190104 82.104407) (xy 145.281411 82.165418) (xy 145.281417 82.16542) + (xy 145.281419 82.165422) (xy 145.454399 82.237073) (xy 145.638034 82.2736) (xy 145.638035 82.2736) + (xy 145.825265 82.2736) (xy 145.825266 82.2736) (xy 146.008901 82.237073) (xy 146.181881 82.165422) + (xy 146.181884 82.165419) (xy 146.181888 82.165418) (xy 146.228454 82.134303) (xy 146.337558 82.061402) + (xy 146.469952 81.929008) (xy 146.563486 81.789025) (xy 146.573968 81.773338) (xy 146.573969 81.773334) + (xy 146.573972 81.773331) (xy 146.631389 81.634713) (xy 146.671126 81.588189) (xy 146.722853 81.5736) + (xy 146.883179 81.5736) (xy 146.941235 81.549551) (xy 146.975247 81.535464) (xy 147.045714 81.464997) + (xy 147.08385 81.372928) (xy 147.08385 81.330168) (xy 147.086318 81.32257) (xy 147.085069 81.314681) + (xy 147.095593 81.294025) (xy 147.102757 81.271977) (xy 147.112846 81.260164) (xy 147.152146 81.220864) + (xy 147.206663 81.193087) (xy 147.267095 81.202658) (xy 147.31036 81.245923) (xy 147.32115 81.290868) + (xy 147.32115 81.416718) (xy 147.357676 81.600349) (xy 147.429327 81.773329) (xy 147.429331 81.773338) + (xy 147.485965 81.858095) (xy 147.533348 81.929008) (xy 147.665742 82.061402) (xy 147.730104 82.104407) + (xy 147.821411 82.165418) (xy 147.821417 82.16542) (xy 147.821419 82.165422) (xy 147.994399 82.237073) + (xy 148.178034 82.2736) (xy 148.178035 82.2736) (xy 148.365265 82.2736) (xy 148.365266 82.2736) + (xy 148.548901 82.237073) (xy 148.721881 82.165422) (xy 148.721884 82.165419) (xy 148.721888 82.165418) + (xy 148.768454 82.134303) (xy 148.877558 82.061402) (xy 149.009952 81.929008) (xy 149.103486 81.789025) + (xy 149.113968 81.773338) (xy 149.113969 81.773334) (xy 149.113972 81.773331) (xy 149.185623 81.600351) + (xy 149.22215 81.416716) (xy 149.22215 81.229484) (xy 149.222149 81.229481) (xy 149.86115 81.229481) + (xy 149.86115 81.416718) (xy 149.897676 81.600349) (xy 149.969327 81.773329) (xy 149.969331 81.773338) + (xy 150.025965 81.858095) (xy 150.073348 81.929008) (xy 150.205742 82.061402) (xy 150.270104 82.104407) + (xy 150.361411 82.165418) (xy 150.361417 82.16542) (xy 150.361419 82.165422) (xy 150.534399 82.237073) + (xy 150.718034 82.2736) (xy 150.718035 82.2736) (xy 150.905265 82.2736) (xy 150.905266 82.2736) + (xy 151.088901 82.237073) (xy 151.261881 82.165422) (xy 151.261884 82.165419) (xy 151.261888 82.165418) + (xy 151.308454 82.134303) (xy 151.417558 82.061402) (xy 151.549952 81.929008) (xy 151.643486 81.789025) + (xy 151.653968 81.773338) (xy 151.653973 81.773329) (xy 151.701352 81.658945) (xy 151.741086 81.612422) + (xy 151.80058 81.598138) (xy 151.857109 81.621552) (xy 151.862818 81.626829) (xy 158.200986 87.964997) + (xy 158.200985 87.964997) (xy 158.271453 88.035464) (xy 158.363521 88.0736) (xy 158.363522 88.0736) + (xy 173.53471 88.0736) (xy 173.592901 88.092507) (xy 173.628865 88.142007) (xy 173.628865 88.203193) + (xy 173.604715 88.242601) (xy 173.550442 88.296875) (xy 173.550439 88.296878) (xy 173.4601 88.432081) + (xy 173.397874 88.582309) (xy 173.36615 88.741794) (xy 173.36615 88.904405) (xy 173.397874 89.06389) + (xy 173.4601 89.214118) (xy 173.533113 89.323391) (xy 173.550442 89.349325) (xy 173.665425 89.464308) + (xy 173.800629 89.554648) (xy 173.80063 89.554648) (xy 173.800631 89.554649) (xy 173.802145 89.555276) + (xy 173.950861 89.616876) (xy 174.110345 89.6486) (xy 174.110346 89.6486) (xy 174.272954 89.6486) + (xy 174.272955 89.6486) (xy 174.432439 89.616876) (xy 174.582671 89.554648) (xy 174.717875 89.464308) + (xy 174.832858 89.349325) (xy 174.923198 89.214121) (xy 174.985426 89.063889) (xy 175.01715 88.904405) + (xy 175.01715 88.741795) (xy 174.985426 88.582311) (xy 174.935128 88.460881) (xy 174.923199 88.432081) + (xy 174.901429 88.3995) (xy 174.832858 88.296875) (xy 174.778584 88.242601) (xy 174.750809 88.188087) + (xy 174.76038 88.127655) (xy 174.803645 88.08439) (xy 174.84859 88.0736) (xy 195.88471 88.0736) + (xy 195.942901 88.092507) (xy 195.978865 88.142007) (xy 195.978865 88.203193) (xy 195.954715 88.242601) + (xy 195.900442 88.296875) (xy 195.900439 88.296878) (xy 195.8101 88.432081) (xy 195.747874 88.582309) + (xy 195.71615 88.741794) (xy 195.71615 88.904405) (xy 195.747874 89.06389) (xy 195.8101 89.214118) + (xy 195.883113 89.323391) (xy 195.900442 89.349325) (xy 196.015425 89.464308) (xy 196.150629 89.554648) + (xy 196.15063 89.554648) (xy 196.150631 89.554649) (xy 196.152145 89.555276) (xy 196.300861 89.616876) + (xy 196.460345 89.6486) (xy 196.460346 89.6486) (xy 196.622954 89.6486) (xy 196.622955 89.6486) + (xy 196.782439 89.616876) (xy 196.932671 89.554648) (xy 196.953559 89.540691) (xy 203.4495 89.540691) + (xy 203.4495 89.659309) (xy 203.468006 89.728375) (xy 203.480202 89.77389) (xy 203.539507 89.876608) + (xy 203.539509 89.87661) (xy 203.539511 89.876613) (xy 203.623387 89.960489) (xy 203.623389 89.96049) + (xy 203.623391 89.960492) (xy 203.72611 90.019797) (xy 203.726111 90.019797) (xy 203.726114 90.019799) + (xy 203.840691 90.0505) (xy 203.840693 90.0505) (xy 203.959307 90.0505) (xy 203.959309 90.0505) + (xy 204.073886 90.019799) (xy 204.073888 90.019797) (xy 204.07389 90.019797) (xy 204.176608 89.960492) + (xy 204.176608 89.960491) (xy 204.176613 89.960489) (xy 204.260489 89.876613) (xy 204.304973 89.799565) + (xy 204.319797 89.77389) (xy 204.319797 89.773888) (xy 204.319799 89.773886) (xy 204.3505 89.659309) + (xy 204.3505 89.540691) (xy 204.319799 89.426114) (xy 204.319797 89.426111) (xy 204.319797 89.426109) + (xy 204.260492 89.323391) (xy 204.26049 89.323389) (xy 204.260489 89.323387) (xy 204.176613 89.239511) + (xy 204.17661 89.239509) (xy 204.176608 89.239507) (xy 204.073889 89.180202) (xy 204.07389 89.180202) + (xy 204.060351 89.176574) (xy 203.959309 89.1495) (xy 203.840691 89.1495) (xy 203.799669 89.160492) + (xy 203.726109 89.180202) (xy 203.623391 89.239507) (xy 203.539507 89.323391) (xy 203.480202 89.426109) + (xy 203.475944 89.442) (xy 203.4495 89.540691) (xy 196.953559 89.540691) (xy 197.067875 89.464308) + (xy 197.182858 89.349325) (xy 197.273198 89.214121) (xy 197.335426 89.063889) (xy 197.36715 88.904405) + (xy 197.36715 88.741795) (xy 197.36693 88.740691) (xy 198.3995 88.740691) (xy 198.3995 88.859309) + (xy 198.4111 88.902599) (xy 198.430202 88.97389) (xy 198.489507 89.076608) (xy 198.489509 89.07661) + (xy 198.489511 89.076613) (xy 198.573387 89.160489) (xy 198.573389 89.16049) (xy 198.573391 89.160492) + (xy 198.67611 89.219797) (xy 198.676111 89.219797) (xy 198.676114 89.219799) (xy 198.790691 89.2505) + (xy 198.790693 89.2505) (xy 198.909307 89.2505) (xy 198.909309 89.2505) (xy 199.023886 89.219799) + (xy 199.023888 89.219797) (xy 199.02389 89.219797) (xy 199.126608 89.160492) (xy 199.126608 89.160491) + (xy 199.126613 89.160489) (xy 199.210489 89.076613) (xy 199.262845 88.985931) (xy 199.269797 88.97389) + (xy 199.269797 88.973888) (xy 199.269799 88.973886) (xy 199.3005 88.859309) (xy 199.3005 88.740691) + (xy 199.269799 88.626114) (xy 199.269797 88.626111) (xy 199.269797 88.626109) (xy 199.210492 88.523391) + (xy 199.21049 88.523389) (xy 199.210489 88.523387) (xy 199.126613 88.439511) (xy 199.12661 88.439509) + (xy 199.126608 88.439507) (xy 199.023889 88.380202) (xy 199.02389 88.380202) (xy 199.010351 88.376574) + (xy 198.909309 88.3495) (xy 198.790691 88.3495) (xy 198.720567 88.368289) (xy 198.676109 88.380202) + (xy 198.573391 88.439507) (xy 198.489507 88.523391) (xy 198.430202 88.626109) (xy 198.413037 88.690169) + (xy 198.3995 88.740691) (xy 197.36693 88.740691) (xy 197.335426 88.582311) (xy 197.285128 88.460881) + (xy 197.273199 88.432081) (xy 197.251429 88.3995) (xy 197.182858 88.296875) (xy 197.128584 88.242601) + (xy 197.100809 88.188087) (xy 197.11038 88.127655) (xy 197.153645 88.08439) (xy 197.19859 88.0736) + (xy 209.021328 88.0736) (xy 209.079519 88.092507) (xy 209.112792 88.134715) (xy 209.180017 88.297013) + (xy 209.180018 88.297014) (xy 209.289511 88.460882) (xy 209.428868 88.600239) (xy 209.592736 88.709732) + (xy 209.774815 88.785151) (xy 209.968109 88.8236) (xy 209.96811 88.8236) (xy 210.41519 88.8236) + (xy 210.415191 88.8236) (xy 210.608485 88.785151) (xy 210.790564 88.709732) (xy 210.954432 88.600239) + (xy 211.093789 88.460882) (xy 211.203282 88.297014) (xy 211.278701 88.114935) (xy 211.31715 87.921641) + (xy 211.31715 87.724559) (xy 211.278701 87.531265) (xy 211.203282 87.349186) (xy 211.093789 87.185318) + (xy 210.954432 87.045961) (xy 210.790564 86.936468) (xy 210.790565 86.936468) (xy 210.790563 86.936467) + (xy 210.608485 86.861049) (xy 210.415193 86.8226) (xy 210.415191 86.8226) (xy 209.968109 86.8226) + (xy 209.968106 86.8226) (xy 209.774815 86.861049) (xy 209.774813 86.861049) (xy 209.592736 86.936467) + (xy 209.428868 87.045961) (xy 209.428864 87.045964) (xy 209.289514 87.185314) (xy 209.289511 87.185318) + (xy 209.180017 87.349186) (xy 209.112792 87.511485) (xy 209.073056 87.558011) (xy 209.021328 87.5726) + (xy 197.19859 87.5726) (xy 197.140399 87.553693) (xy 197.104435 87.504193) (xy 197.104435 87.443007) + (xy 197.128584 87.403598) (xy 197.182858 87.349325) (xy 197.273198 87.214121) (xy 197.335426 87.063889) + (xy 197.36715 86.904405) (xy 197.36715 86.741795) (xy 197.335426 86.582311) (xy 197.273198 86.432079) + (xy 197.182858 86.296875) (xy 197.067875 86.181892) (xy 197.067869 86.181888) (xy 196.941235 86.097274) + (xy 196.932908 86.086711) (xy 196.921394 86.079763) (xy 196.914433 86.063277) (xy 196.903355 86.049224) + (xy 196.902827 86.035785) (xy 196.897596 86.023395) (xy 196.901655 86.005965) (xy 196.901055 85.990691) + (xy 203.4495 85.990691) (xy 203.4495 86.109309) (xy 203.468948 86.181888) (xy 203.480202 86.22389) + (xy 203.539507 86.326608) (xy 203.539509 86.32661) (xy 203.539511 86.326613) (xy 203.623387 86.410489) + (xy 203.623389 86.41049) (xy 203.623391 86.410492) (xy 203.72611 86.469797) (xy 203.726111 86.469797) + (xy 203.726114 86.469799) (xy 203.840691 86.5005) (xy 203.840693 86.5005) (xy 203.959307 86.5005) + (xy 203.959309 86.5005) (xy 204.073886 86.469799) (xy 204.073888 86.469797) (xy 204.07389 86.469797) + (xy 204.176608 86.410492) (xy 204.176608 86.410491) (xy 204.176613 86.410489) (xy 204.260489 86.326613) + (xy 204.277657 86.296878) (xy 204.319797 86.22389) (xy 204.319797 86.223888) (xy 204.319799 86.223886) + (xy 204.3505 86.109309) (xy 204.3505 85.990691) (xy 204.319799 85.876114) (xy 204.319797 85.876111) + (xy 204.319797 85.876109) (xy 204.260492 85.773391) (xy 204.26049 85.773389) (xy 204.260489 85.773387) + (xy 204.176613 85.689511) (xy 204.17661 85.689509) (xy 204.176608 85.689507) (xy 204.073889 85.630202) + (xy 204.07389 85.630202) (xy 204.060351 85.626574) (xy 203.959309 85.5995) (xy 203.840691 85.5995) + (xy 203.775847 85.616875) (xy 203.726109 85.630202) (xy 203.623391 85.689507) (xy 203.539507 85.773391) + (xy 203.480202 85.876109) (xy 203.467436 85.923753) (xy 203.4495 85.990691) (xy 196.901055 85.990691) + (xy 196.900953 85.988086) (xy 196.908423 85.976905) (xy 196.911475 85.963805) (xy 196.923617 85.954165) + (xy 196.934946 85.937212) (xy 196.95773 85.923753) (xy 197.027306 85.894378) (xy 197.157487 85.828047) + (xy 197.17808 85.813084) (xy 196.588096 85.2231) (xy 196.594311 85.2231) (xy 196.696044 85.195841) + (xy 196.787256 85.14318) (xy 196.86173 85.068706) (xy 196.914391 84.977494) (xy 196.94165 84.875761) + (xy 196.94165 84.869546) (xy 197.531634 85.45953) (xy 197.546597 85.438937) (xy 197.630565 85.274141) + (xy 197.687717 85.098243) (xy 197.71665 84.915577) (xy 197.71665 84.730622) (xy 197.687718 84.547958) + (xy 197.644451 84.414795) (xy 197.644451 84.414794) (xy 197.636619 84.390691) (xy 199.5995 84.390691) + (xy 199.5995 84.509309) (xy 199.625089 84.604808) (xy 199.630202 84.62389) (xy 199.689507 84.726608) + (xy 199.689509 84.72661) (xy 199.689511 84.726613) (xy 199.773387 84.810489) (xy 199.773389 84.81049) + (xy 199.773391 84.810492) (xy 199.87611 84.869797) (xy 199.876111 84.869797) (xy 199.876114 84.869799) + (xy 199.990691 84.9005) (xy 199.990693 84.9005) (xy 200.109307 84.9005) (xy 200.109309 84.9005) + (xy 200.223886 84.869799) (xy 200.223888 84.869797) (xy 200.22389 84.869797) (xy 200.326608 84.810492) + (xy 200.326608 84.810491) (xy 200.326613 84.810489) (xy 200.410489 84.726613) (xy 200.459168 84.642299) + (xy 200.469797 84.62389) (xy 200.469797 84.623888) (xy 200.469799 84.623886) (xy 200.5005 84.509309) + (xy 200.5005 84.390691) (xy 200.469799 84.276114) (xy 200.469797 84.276111) (xy 200.469797 84.276109) + (xy 200.410492 84.173391) (xy 200.41049 84.173389) (xy 200.410489 84.173387) (xy 200.326613 84.089511) + (xy 200.32661 84.089509) (xy 200.326608 84.089507) (xy 200.223889 84.030202) (xy 200.22389 84.030202) + (xy 200.210351 84.026574) (xy 200.109309 83.9995) (xy 199.990691 83.9995) (xy 199.920567 84.018289) + (xy 199.876109 84.030202) (xy 199.773391 84.089507) (xy 199.689507 84.173391) (xy 199.630202 84.276109) + (xy 199.614387 84.335134) (xy 199.5995 84.390691) (xy 197.636619 84.390691) (xy 197.630565 84.372058) + (xy 197.546603 84.207272) (xy 197.546598 84.207264) (xy 197.531634 84.186668) (xy 196.94165 84.776652) + (xy 196.94165 84.770439) (xy 196.914391 84.668706) (xy 196.86173 84.577494) (xy 196.787256 84.50302) + (xy 196.696044 84.450359) (xy 196.594311 84.4231) (xy 196.588094 84.4231) (xy 197.17808 83.833114) + (xy 197.157485 83.818151) (xy 197.157477 83.818146) (xy 196.992693 83.734185) (xy 196.965643 83.725396) + (xy 196.916143 83.689432) (xy 196.897236 83.631241) (xy 196.916143 83.57305) (xy 196.941232 83.548927) + (xy 197.067875 83.464308) (xy 197.182858 83.349325) (xy 197.273198 83.214121) (xy 197.335426 83.063889) + (xy 197.36715 82.904405) (xy 197.36715 82.741795) (xy 197.335426 82.582311) (xy 197.294203 82.48279) + (xy 197.273199 82.432081) (xy 197.255424 82.405479) (xy 197.182858 82.296875) (xy 197.067875 82.181892) + (xy 197.067869 82.181888) (xy 196.932668 82.09155) (xy 196.78244 82.029324) (xy 196.622955 81.9976) + (xy 196.460345 81.9976) (xy 196.460344 81.9976) (xy 196.300859 82.029324) (xy 196.150631 82.09155) + (xy 196.015428 82.181889) (xy 195.900439 82.296878) (xy 195.8101 82.432081) (xy 195.747874 82.582309) + (xy 195.71615 82.741794) (xy 195.71615 82.904405) (xy 195.747874 83.06389) (xy 195.8101 83.214118) + (xy 195.825247 83.236788) (xy 195.900442 83.349325) (xy 196.015425 83.464308) (xy 196.015428 83.46431) + (xy 196.142064 83.548925) (xy 196.179944 83.596975) (xy 196.182346 83.658113) (xy 196.148354 83.708987) + (xy 196.117657 83.725395) (xy 196.09061 83.734183) (xy 195.925818 83.818148) (xy 195.905218 83.833114) + (xy 196.495204 84.4231) (xy 196.488989 84.4231) (xy 196.387256 84.450359) (xy 196.296044 84.50302) + (xy 196.22157 84.577494) (xy 196.168909 84.668706) (xy 196.14165 84.770439) (xy 196.14165 84.776654) + (xy 195.551664 84.186668) (xy 195.536698 84.207268) (xy 195.452734 84.372058) (xy 195.395582 84.547956) + (xy 195.36665 84.730622) (xy 195.36665 84.915577) (xy 195.395582 85.098243) (xy 195.452734 85.274141) + (xy 195.536696 85.438927) (xy 195.536701 85.438935) (xy 195.551664 85.459529) (xy 196.14165 84.869543) + (xy 196.14165 84.875761) (xy 196.168909 84.977494) (xy 196.22157 85.068706) (xy 196.296044 85.14318) + (xy 196.387256 85.195841) (xy 196.488989 85.2231) (xy 196.495202 85.2231) (xy 195.905218 85.813084) + (xy 195.925814 85.828048) (xy 195.925822 85.828053) (xy 196.09061 85.912016) (xy 196.090608 85.912016) + (xy 196.117654 85.920803) (xy 196.167155 85.956766) (xy 196.186063 86.014956) (xy 196.167157 86.073147) + (xy 196.142065 86.097273) (xy 196.015429 86.181888) (xy 195.900439 86.296878) (xy 195.8101 86.432081) + (xy 195.747874 86.582309) (xy 195.71615 86.741794) (xy 195.71615 86.904405) (xy 195.747874 87.06389) + (xy 195.8101 87.214118) (xy 195.810101 87.21412) (xy 195.810102 87.214121) (xy 195.900442 87.349325) + (xy 195.954715 87.403598) (xy 195.982491 87.458113) (xy 195.97292 87.518545) (xy 195.929655 87.56181) + (xy 195.88471 87.5726) (xy 174.84859 87.5726) (xy 174.790399 87.553693) (xy 174.754435 87.504193) + (xy 174.754435 87.443007) (xy 174.778584 87.403598) (xy 174.832858 87.349325) (xy 174.923198 87.214121) + (xy 174.985426 87.063889) (xy 175.01715 86.904405) (xy 175.01715 86.790691) (xy 193.3995 86.790691) + (xy 193.3995 86.909309) (xy 193.426574 87.010351) (xy 193.430202 87.02389) (xy 193.489507 87.126608) + (xy 193.489509 87.12661) (xy 193.489511 87.126613) (xy 193.573387 87.210489) (xy 193.573389 87.21049) + (xy 193.573391 87.210492) (xy 193.67611 87.269797) (xy 193.676111 87.269797) (xy 193.676114 87.269799) + (xy 193.790691 87.3005) (xy 193.790693 87.3005) (xy 193.909307 87.3005) (xy 193.909309 87.3005) + (xy 194.023886 87.269799) (xy 194.023888 87.269797) (xy 194.02389 87.269797) (xy 194.126608 87.210492) + (xy 194.126608 87.210491) (xy 194.126613 87.210489) (xy 194.210489 87.126613) (xy 194.210492 87.126608) + (xy 194.269797 87.02389) (xy 194.269797 87.023888) (xy 194.269799 87.023886) (xy 194.3005 86.909309) + (xy 194.3005 86.790691) (xy 194.269799 86.676114) (xy 194.269797 86.676111) (xy 194.269797 86.676109) + (xy 194.210492 86.573391) (xy 194.21049 86.573389) (xy 194.210489 86.573387) (xy 194.126613 86.489511) + (xy 194.12661 86.489509) (xy 194.126608 86.489507) (xy 194.023889 86.430202) (xy 194.02389 86.430202) + (xy 194.010351 86.426574) (xy 193.909309 86.3995) (xy 193.790691 86.3995) (xy 193.749669 86.410492) + (xy 193.676109 86.430202) (xy 193.573391 86.489507) (xy 193.489507 86.573391) (xy 193.430202 86.676109) + (xy 193.430201 86.676114) (xy 193.3995 86.790691) (xy 175.01715 86.790691) (xy 175.01715 86.741795) + (xy 174.985426 86.582311) (xy 174.923198 86.432079) (xy 174.832858 86.296875) (xy 174.717875 86.181892) + (xy 174.717869 86.181888) (xy 174.582668 86.09155) (xy 174.43244 86.029324) (xy 174.272955 85.9976) + (xy 174.110345 85.9976) (xy 174.110344 85.9976) (xy 173.950859 86.029324) (xy 173.800631 86.09155) + (xy 173.665428 86.181889) (xy 173.550439 86.296878) (xy 173.4601 86.432081) (xy 173.397874 86.582309) + (xy 173.36615 86.741794) (xy 173.36615 86.904405) (xy 173.397874 87.06389) (xy 173.4601 87.214118) + (xy 173.460101 87.21412) (xy 173.460102 87.214121) (xy 173.550442 87.349325) (xy 173.604715 87.403598) + (xy 173.632491 87.458113) (xy 173.62292 87.518545) (xy 173.579655 87.56181) (xy 173.53471 87.5726) + (xy 158.558119 87.5726) (xy 158.499928 87.553693) (xy 158.488115 87.543604) (xy 155.648717 84.704206) + (xy 155.585202 84.640691) (xy 167.3995 84.640691) (xy 167.3995 84.759309) (xy 167.404696 84.7787) + (xy 167.430202 84.87389) (xy 167.489507 84.976608) (xy 167.489509 84.97661) (xy 167.489511 84.976613) + (xy 167.573387 85.060489) (xy 167.573389 85.06049) (xy 167.573391 85.060492) (xy 167.67611 85.119797) + (xy 167.676111 85.119797) (xy 167.676114 85.119799) (xy 167.790691 85.1505) (xy 167.790693 85.1505) + (xy 167.909307 85.1505) (xy 167.909309 85.1505) (xy 168.023886 85.119799) (xy 168.023888 85.119797) + (xy 168.02389 85.119797) (xy 168.126608 85.060492) (xy 168.126608 85.060491) (xy 168.126613 85.060489) + (xy 168.210489 84.976613) (xy 168.210492 84.976608) (xy 168.269797 84.87389) (xy 168.269797 84.873888) + (xy 168.269799 84.873886) (xy 168.3005 84.759309) (xy 168.3005 84.741794) (xy 173.36615 84.741794) + (xy 173.36615 84.904405) (xy 173.397874 85.06389) (xy 173.4601 85.214118) (xy 173.460101 85.21412) + (xy 173.460102 85.214121) (xy 173.550442 85.349325) (xy 173.665425 85.464308) (xy 173.800629 85.554648) + (xy 173.950861 85.616876) (xy 174.110345 85.6486) (xy 174.110346 85.6486) (xy 174.272954 85.6486) + (xy 174.272955 85.6486) (xy 174.432439 85.616876) (xy 174.582671 85.554648) (xy 174.717875 85.464308) + (xy 174.832858 85.349325) (xy 174.923198 85.214121) (xy 174.985426 85.063889) (xy 175.01715 84.904405) + (xy 175.01715 84.741795) (xy 174.985426 84.582311) (xy 174.93077 84.450359) (xy 174.923199 84.432081) + (xy 174.911648 84.414794) (xy 174.832858 84.296875) (xy 174.717875 84.181892) (xy 174.705152 84.173391) + (xy 174.582668 84.09155) (xy 174.43244 84.029324) (xy 174.272955 83.9976) (xy 174.110345 83.9976) + (xy 174.110344 83.9976) (xy 173.950859 84.029324) (xy 173.800631 84.09155) (xy 173.665428 84.181889) + (xy 173.550439 84.296878) (xy 173.4601 84.432081) (xy 173.397874 84.582309) (xy 173.36615 84.741794) + (xy 168.3005 84.741794) (xy 168.3005 84.640691) (xy 168.269799 84.526114) (xy 168.269797 84.526111) + (xy 168.269797 84.526109) (xy 168.210492 84.423391) (xy 168.21049 84.423389) (xy 168.210489 84.423387) + (xy 168.126613 84.339511) (xy 168.12661 84.339509) (xy 168.126608 84.339507) (xy 168.023889 84.280202) + (xy 168.02389 84.280202) (xy 167.98168 84.268892) (xy 167.909309 84.2495) (xy 167.790691 84.2495) + (xy 167.720567 84.268289) (xy 167.676109 84.280202) (xy 167.573391 84.339507) (xy 167.489507 84.423391) + (xy 167.430202 84.526109) (xy 167.415143 84.582311) (xy 167.3995 84.640691) (xy 155.585202 84.640691) + (xy 154.713324 83.768813) (xy 152.055247 81.110736) (xy 152.055245 81.110735) (xy 152.055244 81.110734) + (xy 151.963179 81.0726) (xy 151.963178 81.0726) (xy 151.802853 81.0726) (xy 151.744662 81.053693) + (xy 151.711389 81.011486) (xy 151.704045 80.993756) (xy 151.653972 80.872869) (xy 151.65397 80.872866) + (xy 151.653968 80.872862) (xy 151.59308 80.781738) (xy 151.576983 80.757647) (xy 151.549952 80.717192) + (xy 151.417558 80.584798) (xy 151.363854 80.548914) (xy 151.261888 80.480781) (xy 151.261879 80.480777) + (xy 151.088899 80.409126) (xy 150.905268 80.3726) (xy 150.905266 80.3726) (xy 150.718034 80.3726) + (xy 150.718031 80.3726) (xy 150.5344 80.409126) (xy 150.36142 80.480777) (xy 150.361411 80.480781) + (xy 150.205742 80.584798) (xy 150.205738 80.584801) (xy 150.073351 80.717188) (xy 150.073348 80.717192) + (xy 149.969331 80.872861) (xy 149.969327 80.87287) (xy 149.897676 81.04585) (xy 149.86115 81.229481) + (xy 149.222149 81.229481) (xy 149.185623 81.045849) (xy 149.113972 80.872869) (xy 149.11397 80.872867) + (xy 149.113968 80.872861) (xy 149.036983 80.757647) (xy 149.009952 80.717192) (xy 148.877558 80.584798) + (xy 148.823854 80.548914) (xy 148.721888 80.480781) (xy 148.721879 80.480777) (xy 148.548899 80.409126) + (xy 148.365268 80.3726) (xy 148.365266 80.3726) (xy 148.239418 80.3726) (xy 148.181227 80.353693) + (xy 148.145263 80.304193) (xy 148.145263 80.243007) (xy 148.169414 80.203596) (xy 149.402019 78.970991) + (xy 166.34755 78.970991) (xy 166.34755 79.089609) (xy 166.374624 79.190651) (xy 166.378252 79.20419) + (xy 166.437557 79.306908) (xy 166.437559 79.30691) (xy 166.437561 79.306913) (xy 166.521437 79.390789) + (xy 166.521439 79.39079) (xy 166.521441 79.390792) (xy 166.62416 79.450097) (xy 166.624161 79.450097) + (xy 166.624164 79.450099) (xy 166.738741 79.4808) (xy 166.738743 79.4808) (xy 166.857357 79.4808) + (xy 166.857359 79.4808) (xy 166.971936 79.450099) (xy 166.971938 79.450097) (xy 166.97194 79.450097) + (xy 167.074658 79.390792) (xy 167.074658 79.390791) (xy 167.074663 79.390789) (xy 167.158539 79.306913) + (xy 167.217849 79.204186) (xy 167.24855 79.089609) (xy 167.24855 78.970991) (xy 167.217849 78.856414) + (xy 167.217847 78.856411) (xy 167.217847 78.856409) (xy 167.158542 78.753691) (xy 167.15854 78.753689) + (xy 167.158539 78.753687) (xy 167.074663 78.669811) (xy 167.07466 78.669809) (xy 167.074658 78.669807) + (xy 166.971939 78.610502) (xy 166.97194 78.610502) (xy 166.958401 78.606874) (xy 166.857359 78.5798) + (xy 166.738741 78.5798) (xy 166.668617 78.598589) (xy 166.624159 78.610502) (xy 166.521441 78.669807) + (xy 166.437557 78.753691) (xy 166.378252 78.856409) (xy 166.378251 78.856414) (xy 166.34755 78.970991) + (xy 149.402019 78.970991) (xy 150.595919 77.777091) (xy 162.88285 77.777091) (xy 162.88285 77.895709) + (xy 162.903614 77.973199) (xy 162.913552 78.01029) (xy 162.972857 78.113008) (xy 162.972859 78.11301) + (xy 162.972861 78.113013) (xy 163.056737 78.196889) (xy 163.056739 78.19689) (xy 163.056741 78.196892) + (xy 163.15946 78.256197) (xy 163.159461 78.256197) (xy 163.159464 78.256199) (xy 163.274041 78.2869) + (xy 163.274043 78.2869) (xy 163.392657 78.2869) (xy 163.392659 78.2869) (xy 163.507236 78.256199) + (xy 163.507238 78.256197) (xy 163.50724 78.256197) (xy 163.609958 78.196892) (xy 163.609958 78.196891) + (xy 163.609963 78.196889) (xy 163.690957 78.115894) (xy 163.745472 78.088119) (xy 163.760959 78.0869) + (xy 173.060181 78.0869) (xy 173.118372 78.105807) (xy 173.130185 78.115896) (xy 173.409304 78.395015) + (xy 173.437081 78.449532) (xy 173.430765 78.502903) (xy 173.397874 78.582311) (xy 173.36615 78.741794) + (xy 173.36615 78.904405) (xy 173.397874 79.06389) (xy 173.4601 79.214118) (xy 173.549419 79.347795) + (xy 173.550442 79.349325) (xy 173.665425 79.464308) (xy 173.665428 79.46431) (xy 173.792064 79.548925) + (xy 173.829944 79.596975) (xy 173.832346 79.658113) (xy 173.798354 79.708987) (xy 173.767657 79.725395) + (xy 173.74061 79.734183) (xy 173.575818 79.818148) (xy 173.555218 79.833114) (xy 174.145204 80.4231) + (xy 174.138989 80.4231) (xy 174.037256 80.450359) (xy 173.946044 80.50302) (xy 173.87157 80.577494) + (xy 173.818909 80.668706) (xy 173.79165 80.770439) (xy 173.79165 80.776654) (xy 173.201664 80.186668) + (xy 173.186698 80.207268) (xy 173.102734 80.372058) (xy 173.045582 80.547956) (xy 173.01665 80.730622) + (xy 173.01665 80.915577) (xy 173.045582 81.098243) (xy 173.102734 81.274141) (xy 173.186696 81.438927) + (xy 173.186701 81.438935) (xy 173.201664 81.459529) (xy 173.79165 80.869543) (xy 173.79165 80.875761) + (xy 173.818909 80.977494) (xy 173.87157 81.068706) (xy 173.946044 81.14318) (xy 174.037256 81.195841) + (xy 174.138989 81.2231) (xy 174.145202 81.2231) (xy 173.555218 81.813084) (xy 173.575814 81.828048) + (xy 173.575822 81.828053) (xy 173.74061 81.912016) (xy 173.740608 81.912016) (xy 173.767654 81.920803) + (xy 173.817155 81.956766) (xy 173.836063 82.014956) (xy 173.817157 82.073147) (xy 173.792065 82.097273) + (xy 173.665429 82.181888) (xy 173.550439 82.296878) (xy 173.4601 82.432081) (xy 173.397874 82.582309) + (xy 173.36615 82.741794) (xy 173.36615 82.904405) (xy 173.397874 83.06389) (xy 173.4601 83.214118) + (xy 173.475247 83.236788) (xy 173.550442 83.349325) (xy 173.665425 83.464308) (xy 173.800629 83.554648) + (xy 173.950861 83.616876) (xy 174.110345 83.6486) (xy 174.110346 83.6486) (xy 174.272954 83.6486) + (xy 174.272955 83.6486) (xy 174.432439 83.616876) (xy 174.582671 83.554648) (xy 174.717875 83.464308) + (xy 174.832858 83.349325) (xy 174.923198 83.214121) (xy 174.985426 83.063889) (xy 175.01715 82.904405) + (xy 175.01715 82.741795) (xy 174.985426 82.582311) (xy 174.944203 82.48279) (xy 174.923199 82.432081) + (xy 174.905424 82.405479) (xy 174.832858 82.296875) (xy 174.717875 82.181892) (xy 174.717869 82.181888) + (xy 174.591235 82.097274) (xy 174.553355 82.049224) (xy 174.550953 81.988086) (xy 174.584946 81.937212) + (xy 174.615646 81.920803) (xy 174.642688 81.912017) (xy 174.642689 81.912016) (xy 174.807487 81.828047) + (xy 174.82808 81.813084) (xy 174.238096 81.2231) (xy 174.244311 81.2231) (xy 174.346044 81.195841) + (xy 174.437256 81.14318) (xy 174.51173 81.068706) (xy 174.564391 80.977494) (xy 174.59165 80.875761) + (xy 174.59165 80.869546) (xy 175.181634 81.45953) (xy 175.196597 81.438937) (xy 175.280565 81.274141) + (xy 175.337717 81.098243) (xy 175.36665 80.915577) (xy 175.36665 80.741794) (xy 195.71615 80.741794) + (xy 195.71615 80.904405) (xy 195.747874 81.06389) (xy 195.8101 81.214118) (xy 195.887641 81.330168) + (xy 195.900442 81.349325) (xy 196.015425 81.464308) (xy 196.150629 81.554648) (xy 196.300861 81.616876) + (xy 196.460345 81.6486) (xy 196.460346 81.6486) (xy 196.622954 81.6486) (xy 196.622955 81.6486) + (xy 196.782439 81.616876) (xy 196.932671 81.554648) (xy 197.067875 81.464308) (xy 197.182858 81.349325) + (xy 197.273198 81.214121) (xy 197.335426 81.063889) (xy 197.36715 80.904405) (xy 197.36715 80.741795) + (xy 197.335426 80.582311) (xy 197.28077 80.450359) (xy 197.273199 80.432081) (xy 197.233455 80.3726) + (xy 197.182858 80.296875) (xy 197.067875 80.181892) (xy 196.932671 80.091552) (xy 196.93267 80.091551) + (xy 196.932668 80.09155) (xy 196.78244 80.029324) (xy 196.622955 79.9976) (xy 196.460345 79.9976) + (xy 196.460344 79.9976) (xy 196.300859 80.029324) (xy 196.150631 80.09155) (xy 196.015428 80.181889) + (xy 195.900439 80.296878) (xy 195.8101 80.432081) (xy 195.747874 80.582309) (xy 195.71615 80.741794) + (xy 175.36665 80.741794) (xy 175.36665 80.730622) (xy 175.337717 80.547956) (xy 175.280565 80.372058) + (xy 175.196603 80.207272) (xy 175.196598 80.207264) (xy 175.181634 80.186668) (xy 174.59165 80.776652) + (xy 174.59165 80.770439) (xy 174.564391 80.668706) (xy 174.51173 80.577494) (xy 174.437256 80.50302) + (xy 174.346044 80.450359) (xy 174.244311 80.4231) (xy 174.238094 80.4231) (xy 174.82808 79.833114) + (xy 174.807485 79.818151) (xy 174.807477 79.818146) (xy 174.642693 79.734185) (xy 174.615643 79.725396) + (xy 174.566143 79.689432) (xy 174.547236 79.631241) (xy 174.566143 79.57305) (xy 174.591232 79.548927) + (xy 174.717875 79.464308) (xy 174.832858 79.349325) (xy 174.923198 79.214121) (xy 174.985426 79.063889) + (xy 175.01715 78.904405) (xy 175.01715 78.741795) (xy 175.01715 78.741794) (xy 195.71615 78.741794) + (xy 195.71615 78.904405) (xy 195.747874 79.06389) (xy 195.8101 79.214118) (xy 195.899419 79.347795) + (xy 195.900442 79.349325) (xy 196.015425 79.464308) (xy 196.150629 79.554648) (xy 196.300861 79.616876) + (xy 196.460345 79.6486) (xy 196.460346 79.6486) (xy 196.622954 79.6486) (xy 196.622955 79.6486) + (xy 196.782439 79.616876) (xy 196.932671 79.554648) (xy 197.067875 79.464308) (xy 197.182858 79.349325) + (xy 197.273198 79.214121) (xy 197.335426 79.063889) (xy 197.36715 78.904405) (xy 197.36715 78.741795) + (xy 197.335426 78.582311) (xy 197.280427 78.449532) (xy 197.273199 78.432081) (xy 197.248432 78.395015) + (xy 197.182858 78.296875) (xy 197.067875 78.181892) (xy 196.932671 78.091552) (xy 196.93267 78.091551) + (xy 196.932668 78.09155) (xy 196.78244 78.029324) (xy 196.622955 77.9976) (xy 196.460345 77.9976) + (xy 196.460344 77.9976) (xy 196.300859 78.029324) (xy 196.150631 78.09155) (xy 196.015428 78.181889) + (xy 195.900439 78.296878) (xy 195.8101 78.432081) (xy 195.747874 78.582309) (xy 195.71615 78.741794) + (xy 175.01715 78.741794) (xy 174.985426 78.582311) (xy 174.930427 78.449532) (xy 174.923199 78.432081) + (xy 174.898432 78.395015) (xy 174.832858 78.296875) (xy 174.717875 78.181892) (xy 174.582671 78.091552) + (xy 174.58267 78.091551) (xy 174.582668 78.09155) (xy 174.43244 78.029324) (xy 174.272955 77.9976) + (xy 174.110345 77.9976) (xy 174.110344 77.9976) (xy 173.950861 78.029324) (xy 173.871453 78.062215) + (xy 173.810456 78.067014) (xy 173.763565 78.040754) (xy 173.586324 77.863513) (xy 173.586322 77.86351) + (xy 173.346846 77.624035) (xy 173.254779 77.5859) (xy 173.254778 77.5859) (xy 163.760959 77.5859) + (xy 163.702768 77.566993) (xy 163.690961 77.556909) (xy 163.609963 77.475911) (xy 163.60996 77.475909) + (xy 163.609958 77.475907) (xy 163.507239 77.416602) (xy 163.50724 77.416602) (xy 163.493701 77.412974) + (xy 163.392659 77.3859) (xy 163.274041 77.3859) (xy 163.203917 77.404689) (xy 163.159459 77.416602) + (xy 163.056741 77.475907) (xy 162.972857 77.559791) (xy 162.913552 77.662509) (xy 162.913551 77.662514) + (xy 162.88285 77.777091) (xy 150.595919 77.777091) (xy 151.270414 77.102596) (xy 151.324931 77.074819) + (xy 151.340418 77.0736) (xy 173.335746 77.0736) (xy 173.393937 77.092507) (xy 173.42721 77.134714) + (xy 173.460101 77.21412) (xy 173.532918 77.323099) (xy 173.550442 77.349325) (xy 173.665425 77.464308) + (xy 173.800629 77.554648) (xy 173.80063 77.554648) (xy 173.800631 77.554649) (xy 173.875745 77.585762) + (xy 173.950861 77.616876) (xy 174.110345 77.6486) (xy 174.110346 77.6486) (xy 174.272954 77.6486) + (xy 174.272955 77.6486) (xy 174.432439 77.616876) (xy 174.582671 77.554648) (xy 174.717875 77.464308) + (xy 174.832858 77.349325) (xy 174.923198 77.214121) (xy 174.985426 77.063889) (xy 175.01715 76.904405) + (xy 175.01715 76.741795) (xy 174.985426 76.582311) (xy 174.923198 76.432079) (xy 174.832858 76.296875) + (xy 174.717875 76.181892) (xy 174.716568 76.181019) (xy 174.582668 76.09155) (xy 174.43244 76.029324) + (xy 174.272955 75.9976) (xy 174.110345 75.9976) (xy 174.110344 75.9976) (xy 173.950859 76.029324) + (xy 173.800631 76.09155) (xy 173.665428 76.181889) (xy 173.550439 76.296878) (xy 173.460101 76.432079) + (xy 173.42721 76.511486) (xy 173.387473 76.558012) (xy 173.335746 76.5726) (xy 151.145821 76.5726) + (xy 151.053753 76.610735) (xy 150.983285 76.681202) (xy 150.983286 76.681203) (xy 150.983285 76.681204) + (xy 146.742487 80.922001) (xy 146.68797 80.949778) (xy 146.627538 80.940207) (xy 146.584273 80.896942) + (xy 146.581023 80.889892) (xy 146.573972 80.872869) (xy 146.573967 80.872862) (xy 146.524216 80.798404) + (xy 146.469952 80.717192) (xy 146.337558 80.584798) (xy 146.283854 80.548914) (xy 146.181888 80.480781) + (xy 146.181879 80.480777) (xy 146.008899 80.409126) (xy 145.825268 80.3726) (xy 145.825266 80.3726) + (xy 145.638034 80.3726) (xy 145.638031 80.3726) (xy 145.4544 80.409126) (xy 145.28142 80.480777) + (xy 145.281411 80.480781) (xy 145.125742 80.584798) (xy 145.125738 80.584801) (xy 144.993351 80.717188) + (xy 144.993348 80.717192) (xy 144.889331 80.872861) (xy 144.889327 80.87287) (xy 144.817676 81.04585) + (xy 144.78115 81.229481) (xy 144.142149 81.229481) (xy 144.105623 81.045849) (xy 144.033972 80.872869) + (xy 144.03397 80.872867) (xy 144.033968 80.872861) (xy 143.956983 80.757647) (xy 143.929952 80.717192) + (xy 143.797558 80.584798) (xy 143.743854 80.548914) (xy 143.641888 80.480781) (xy 143.641879 80.480777) + (xy 143.468899 80.409126) (xy 143.285268 80.3726) (xy 143.285266 80.3726) (xy 143.098034 80.3726) + (xy 143.098031 80.3726) (xy 142.9144 80.409126) (xy 142.74142 80.480777) (xy 142.741411 80.480781) + (xy 142.585742 80.584798) (xy 142.585738 80.584801) (xy 142.453351 80.717188) (xy 142.453348 80.717192) + (xy 142.349331 80.872861) (xy 142.349327 80.87287) (xy 142.277676 81.04585) (xy 142.24115 81.229481) + (xy 141.602149 81.229481) (xy 141.565623 81.045849) (xy 141.493972 80.872869) (xy 141.49397 80.872867) + (xy 141.493968 80.872861) (xy 141.416983 80.757647) (xy 141.389952 80.717192) (xy 141.257558 80.584798) + (xy 141.203854 80.548914) (xy 141.101888 80.480781) (xy 141.101879 80.480777) (xy 140.928899 80.409126) + (xy 140.745268 80.3726) (xy 140.745266 80.3726) (xy 140.558034 80.3726) (xy 140.558031 80.3726) + (xy 140.3744 80.409126) (xy 140.20142 80.480777) (xy 140.201411 80.480781) (xy 140.045742 80.584798) + (xy 140.045738 80.584801) (xy 139.913351 80.717188) (xy 139.913348 80.717192) (xy 139.809331 80.872861) + (xy 139.809327 80.87287) (xy 139.737676 81.04585) (xy 139.70115 81.229481) (xy 139.062149 81.229481) + (xy 139.025623 81.045849) (xy 138.953972 80.872869) (xy 138.95397 80.872867) (xy 138.953968 80.872861) + (xy 138.876983 80.757647) (xy 138.849952 80.717192) (xy 138.717558 80.584798) (xy 138.663854 80.548914) + (xy 138.561888 80.480781) (xy 138.561879 80.480777) (xy 138.388899 80.409126) (xy 138.205268 80.3726) + (xy 138.205266 80.3726) (xy 138.018034 80.3726) (xy 138.018031 80.3726) (xy 137.8344 80.409126) + (xy 137.66142 80.480777) (xy 137.661411 80.480781) (xy 137.505742 80.584798) (xy 137.505738 80.584801) + (xy 137.373351 80.717188) (xy 137.373348 80.717192) (xy 137.269331 80.872861) (xy 137.269327 80.87287) + (xy 137.197676 81.04585) (xy 137.16115 81.229481) (xy 136.522149 81.229481) (xy 136.485623 81.045849) + (xy 136.413972 80.872869) (xy 136.41397 80.872867) (xy 136.413968 80.872861) (xy 136.336983 80.757647) + (xy 136.309952 80.717192) (xy 136.177558 80.584798) (xy 136.123854 80.548914) (xy 136.021888 80.480781) + (xy 136.021879 80.480777) (xy 135.848899 80.409126) (xy 135.665268 80.3726) (xy 135.665266 80.3726) + (xy 135.478034 80.3726) (xy 135.478031 80.3726) (xy 135.2944 80.409126) (xy 135.12142 80.480777) + (xy 135.121411 80.480781) (xy 134.965742 80.584798) (xy 134.965738 80.584801) (xy 134.833351 80.717188) + (xy 134.833348 80.717192) (xy 134.729331 80.872861) (xy 134.729327 80.87287) (xy 134.657676 81.04585) + (xy 134.62115 81.229481) (xy 133.982149 81.229481) (xy 133.945623 81.045849) (xy 133.873972 80.872869) + (xy 133.87397 80.872867) (xy 133.873968 80.872861) (xy 133.796983 80.757647) (xy 133.769952 80.717192) + (xy 133.637558 80.584798) (xy 133.583854 80.548914) (xy 133.481888 80.480781) (xy 133.481879 80.480777) + (xy 133.308899 80.409126) (xy 133.125268 80.3726) (xy 133.125266 80.3726) (xy 132.938034 80.3726) + (xy 132.938031 80.3726) (xy 132.7544 80.409126) (xy 132.58142 80.480777) (xy 132.581411 80.480781) + (xy 132.425742 80.584798) (xy 132.425738 80.584801) (xy 132.293351 80.717188) (xy 132.293348 80.717192) + (xy 132.189331 80.872861) (xy 132.189327 80.87287) (xy 132.117676 81.04585) (xy 132.08115 81.229481) + (xy 130.52123 81.229481) (xy 135.541915 76.208796) (xy 135.596432 76.181019) (xy 135.611919 76.1798) + (xy 165.612341 76.1798) (xy 165.670532 76.198707) (xy 165.682338 76.20879) (xy 165.763337 76.289789) + (xy 165.763339 76.28979) (xy 165.763341 76.289792) (xy 165.86606 76.349097) (xy 165.866061 76.349097) + (xy 165.866064 76.349099) (xy 165.980641 76.3798) (xy 166.099259 76.3798) (xy 166.213836 76.349099) + (xy 166.213838 76.349097) (xy 166.21384 76.349097) (xy 166.316558 76.289792) (xy 166.316558 76.289791) + (xy 166.316563 76.289789) (xy 166.400439 76.205913) (xy 166.400442 76.205908) (xy 166.459747 76.10319) + (xy 166.459747 76.103188) (xy 166.459749 76.103186) (xy 166.49045 75.988609) (xy 166.49045 75.869991) + (xy 166.481214 75.835522) (xy 166.484417 75.774421) (xy 166.522922 75.726871) (xy 166.576841 75.7109) + (xy 166.586357 75.7109) (xy 166.586359 75.7109) (xy 166.700936 75.680199) (xy 166.700938 75.680197) + (xy 166.70094 75.680197) (xy 166.803658 75.620892) (xy 166.803658 75.620891) (xy 166.803663 75.620889) + (xy 166.887539 75.537013) (xy 166.901449 75.51292) (xy 166.946847 75.43429) (xy 166.946847 75.434288) + (xy 166.946849 75.434286) (xy 166.97755 75.319709) (xy 166.97755 75.201091) (xy 166.946849 75.086514) + (xy 166.946847 75.086511) (xy 166.946847 75.086509) (xy 166.887542 74.983791) (xy 166.88754 74.983789) + (xy 166.887539 74.983787) (xy 166.803663 74.899911) (xy 166.80366 74.899909) (xy 166.803658 74.899907) + (xy 166.700939 74.840602) (xy 166.70094 74.840602) (xy 166.687401 74.836974) (xy 166.586359 74.8099) + (xy 166.467741 74.8099) (xy 166.397617 74.828689) (xy 166.353159 74.840602) (xy 166.250441 74.899907) + (xy 166.166557 74.983791) (xy 166.107252 75.086509) (xy 166.102673 75.103599) (xy 166.07655 75.201091) + (xy 166.07655 75.319709) (xy 166.085786 75.354177) (xy 166.082583 75.415279) (xy 166.044078 75.462829) + (xy 165.990159 75.4788) (xy 165.980641 75.4788) (xy 165.910517 75.497589) (xy 165.866059 75.509502) + (xy 165.763341 75.568807) (xy 165.76334 75.568808) (xy 165.763337 75.56881) (xy 165.763337 75.568811) + (xy 165.682342 75.649805) (xy 165.627828 75.677581) (xy 165.612341 75.6788) (xy 141.769219 75.6788) + (xy 141.711028 75.659893) (xy 141.675064 75.610393) (xy 141.675064 75.549207) (xy 141.699215 75.509797) + (xy 142.189625 75.019385) (xy 142.244142 74.991607) (xy 142.297512 74.997923) (xy 142.459815 75.065151) + (xy 142.653109 75.1036) (xy 142.65311 75.1036) (xy 142.85019 75.1036) (xy 142.850191 75.1036) (xy 143.043485 75.065151) + (xy 143.225564 74.989732) (xy 143.389432 74.880239) (xy 143.528789 74.740882) (xy 143.638282 74.577014) + (xy 143.713701 74.394935) (xy 143.75215 74.201641) (xy 143.75215 74.004559) (xy 143.752149 74.004556) + (xy 144.29115 74.004556) (xy 144.29115 74.201643) (xy 144.329599 74.394934) (xy 144.329599 74.394936) + (xy 144.405017 74.577013) (xy 144.422448 74.6031) (xy 144.514511 74.740882) (xy 144.653868 74.880239) + (xy 144.817736 74.989732) (xy 144.999815 75.065151) (xy 145.193109 75.1036) (xy 145.19311 75.1036) + (xy 145.39019 75.1036) (xy 145.390191 75.1036) (xy 145.583485 75.065151) (xy 145.765564 74.989732) + (xy 145.929432 74.880239) (xy 146.068789 74.740882) (xy 146.178282 74.577014) (xy 146.253701 74.394935) + (xy 146.29215 74.201641) (xy 146.29215 74.004559) (xy 146.292149 74.004556) (xy 146.83115 74.004556) + (xy 146.83115 74.201643) (xy 146.869599 74.394934) (xy 146.869599 74.394936) (xy 146.945017 74.577013) + (xy 146.962448 74.6031) (xy 147.054511 74.740882) (xy 147.193868 74.880239) (xy 147.357736 74.989732) + (xy 147.539815 75.065151) (xy 147.733109 75.1036) (xy 147.73311 75.1036) (xy 147.93019 75.1036) + (xy 147.930191 75.1036) (xy 148.123485 75.065151) (xy 148.305564 74.989732) (xy 148.469432 74.880239) + (xy 148.608789 74.740882) (xy 148.718282 74.577014) (xy 148.793701 74.394935) (xy 148.83215 74.201641) + (xy 148.83215 74.004559) (xy 148.793701 73.811265) (xy 148.718282 73.629186) (xy 148.608789 73.465318) + (xy 148.469432 73.325961) (xy 148.340128 73.239563) (xy 148.305563 73.216467) (xy 148.123485 73.141049) + (xy 147.930193 73.1026) (xy 147.930191 73.1026) (xy 147.733109 73.1026) (xy 147.733106 73.1026) + (xy 147.539815 73.141049) (xy 147.539813 73.141049) (xy 147.357736 73.216467) (xy 147.193868 73.325961) + (xy 147.193864 73.325964) (xy 147.054514 73.465314) (xy 147.054511 73.465318) (xy 146.945017 73.629186) + (xy 146.869599 73.811263) (xy 146.869599 73.811265) (xy 146.83115 74.004556) (xy 146.292149 74.004556) + (xy 146.253701 73.811265) (xy 146.178282 73.629186) (xy 146.068789 73.465318) (xy 145.929432 73.325961) + (xy 145.800128 73.239563) (xy 145.765563 73.216467) (xy 145.583485 73.141049) (xy 145.390193 73.1026) + (xy 145.390191 73.1026) (xy 145.193109 73.1026) (xy 145.193106 73.1026) (xy 144.999815 73.141049) + (xy 144.999813 73.141049) (xy 144.817736 73.216467) (xy 144.653868 73.325961) (xy 144.653864 73.325964) + (xy 144.514514 73.465314) (xy 144.514511 73.465318) (xy 144.405017 73.629186) (xy 144.329599 73.811263) + (xy 144.329599 73.811265) (xy 144.29115 74.004556) (xy 143.752149 74.004556) (xy 143.713701 73.811265) + (xy 143.638282 73.629186) (xy 143.528789 73.465318) (xy 143.389432 73.325961) (xy 143.260128 73.239563) + (xy 143.225563 73.216467) (xy 143.043485 73.141049) (xy 142.850193 73.1026) (xy 142.850191 73.1026) + (xy 142.653109 73.1026) (xy 142.653106 73.1026) (xy 142.459815 73.141049) (xy 142.459813 73.141049) + (xy 142.277736 73.216467) (xy 142.113868 73.325961) (xy 142.113864 73.325964) (xy 141.974514 73.465314) + (xy 141.974511 73.465318) (xy 141.865017 73.629186) (xy 141.789599 73.811263) (xy 141.789599 73.811265) + (xy 141.75115 74.004556) (xy 141.75115 74.201643) (xy 141.789599 74.394934) (xy 141.789599 74.394936) + (xy 141.856824 74.557234) (xy 141.861624 74.618231) (xy 141.835364 74.665122) (xy 141.294685 75.205803) + (xy 141.240168 75.233581) (xy 141.224681 75.2348) (xy 140.591622 75.2348) (xy 140.533431 75.215893) + (xy 140.497467 75.166393) (xy 140.497467 75.105207) (xy 140.533431 75.055707) (xy 140.553737 75.044336) + (xy 140.685564 74.989732) (xy 140.849432 74.880239) (xy 140.988789 74.740882) (xy 141.098282 74.577014) + (xy 141.173701 74.394935) (xy 141.21215 74.201641) (xy 141.21215 74.004559) (xy 141.173701 73.811265) + (xy 141.098282 73.629186) (xy 140.988789 73.465318) (xy 140.849432 73.325961) (xy 140.720128 73.239563) + (xy 140.685563 73.216467) (xy 140.503485 73.141049) (xy 140.310193 73.1026) (xy 140.310191 73.1026) + (xy 140.113109 73.1026) (xy 140.113106 73.1026) (xy 139.919815 73.141049) (xy 139.919813 73.141049) + (xy 139.737736 73.216467) (xy 139.573868 73.325961) (xy 139.573864 73.325964) (xy 139.434514 73.465314) + (xy 139.434511 73.465318) (xy 139.325017 73.629186) (xy 139.249599 73.811263) (xy 139.249599 73.811265) + (xy 139.21115 74.004556) (xy 139.21115 74.201643) (xy 139.249599 74.394934) (xy 139.249599 74.394936) + (xy 139.325017 74.577013) (xy 139.342448 74.6031) (xy 139.434511 74.740882) (xy 139.573868 74.880239) + (xy 139.737736 74.989732) (xy 139.863452 75.041805) (xy 139.869563 75.044336) (xy 139.916089 75.084072) + (xy 139.930373 75.143567) (xy 139.906959 75.200095) (xy 139.85479 75.232064) (xy 139.831678 75.2348) + (xy 138.051622 75.2348) (xy 137.993431 75.215893) (xy 137.957467 75.166393) (xy 137.957467 75.105207) + (xy 137.993431 75.055707) (xy 138.013737 75.044336) (xy 138.145564 74.989732) (xy 138.309432 74.880239) + (xy 138.448789 74.740882) (xy 138.558282 74.577014) (xy 138.633701 74.394935) (xy 138.67215 74.201641) + (xy 138.67215 74.004559) (xy 138.633701 73.811265) (xy 138.558282 73.629186) (xy 138.448789 73.465318) + (xy 138.309432 73.325961) (xy 138.180128 73.239563) (xy 138.145563 73.216467) (xy 137.963485 73.141049) + (xy 137.770193 73.1026) (xy 137.770191 73.1026) (xy 137.573109 73.1026) (xy 137.573106 73.1026) + (xy 137.379815 73.141049) (xy 137.379813 73.141049) (xy 137.197736 73.216467) (xy 137.033868 73.325961) + (xy 137.033864 73.325964) (xy 136.894514 73.465314) (xy 136.894511 73.465318) (xy 136.785017 73.629186) + (xy 136.709599 73.811263) (xy 136.709599 73.811265) (xy 136.67115 74.004556) (xy 136.67115 74.201643) + (xy 136.709599 74.394934) (xy 136.709599 74.394936) (xy 136.785017 74.577013) (xy 136.802448 74.6031) + (xy 136.894511 74.740882) (xy 137.033868 74.880239) (xy 137.197736 74.989732) (xy 137.323452 75.041805) + (xy 137.329563 75.044336) (xy 137.376089 75.084072) (xy 137.390373 75.143567) (xy 137.366959 75.200095) + (xy 137.31479 75.232064) (xy 137.291678 75.2348) (xy 135.511622 75.2348) (xy 135.453431 75.215893) + (xy 135.417467 75.166393) (xy 135.417467 75.105207) (xy 135.453431 75.055707) (xy 135.473737 75.044336) + (xy 135.605564 74.989732) (xy 135.769432 74.880239) (xy 135.908789 74.740882) (xy 136.018282 74.577014) + (xy 136.093701 74.394935) (xy 136.13215 74.201641) (xy 136.13215 74.004559) (xy 136.093701 73.811265) + (xy 136.018282 73.629186) (xy 135.908789 73.465318) (xy 135.769432 73.325961) (xy 135.640128 73.239563) + (xy 135.605563 73.216467) (xy 135.423485 73.141049) (xy 135.230193 73.1026) (xy 135.230191 73.1026) + (xy 135.033109 73.1026) (xy 135.033106 73.1026) (xy 134.839815 73.141049) (xy 134.839813 73.141049) + (xy 134.657736 73.216467) (xy 134.493868 73.325961) (xy 134.493864 73.325964) (xy 134.354514 73.465314) + (xy 134.354511 73.465318) (xy 134.245017 73.629186) (xy 134.169599 73.811263) (xy 134.169599 73.811265) + (xy 134.13115 74.004556) (xy 134.13115 74.201643) (xy 134.169599 74.394934) (xy 134.169599 74.394936) + (xy 134.245017 74.577013) (xy 134.262448 74.6031) (xy 134.354511 74.740882) (xy 134.493868 74.880239) + (xy 134.657736 74.989732) (xy 134.783452 75.041805) (xy 134.789563 75.044336) (xy 134.836089 75.084072) + (xy 134.850373 75.143567) (xy 134.826959 75.200095) (xy 134.77479 75.232064) (xy 134.751678 75.2348) + (xy 132.971622 75.2348) (xy 132.913431 75.215893) (xy 132.877467 75.166393) (xy 132.877467 75.105207) + (xy 132.913431 75.055707) (xy 132.933737 75.044336) (xy 133.065564 74.989732) (xy 133.229432 74.880239) + (xy 133.368789 74.740882) (xy 133.478282 74.577014) (xy 133.553701 74.394935) (xy 133.59215 74.201641) + (xy 133.59215 74.004559) (xy 133.553701 73.811265) (xy 133.478282 73.629186) (xy 133.368789 73.465318) + (xy 133.229432 73.325961) (xy 133.100128 73.239563) (xy 133.065563 73.216467) (xy 132.883485 73.141049) + (xy 132.690193 73.1026) (xy 132.690191 73.1026) (xy 132.493109 73.1026) (xy 132.493106 73.1026) + (xy 132.299815 73.141049) (xy 132.299813 73.141049) (xy 132.117736 73.216467) (xy 131.953868 73.325961) + (xy 131.953864 73.325964) (xy 131.814514 73.465314) (xy 131.814511 73.465318) (xy 131.705017 73.629186) + (xy 131.629599 73.811263) (xy 131.629599 73.811265) (xy 131.59115 74.004556) (xy 131.59115 74.201643) + (xy 131.629599 74.394934) (xy 131.629599 74.394936) (xy 131.705017 74.577013) (xy 131.722448 74.6031) + (xy 131.814511 74.740882) (xy 131.953868 74.880239) (xy 132.117736 74.989732) (xy 132.243452 75.041805) + (xy 132.249563 75.044336) (xy 132.296089 75.084072) (xy 132.310373 75.143567) (xy 132.286959 75.200095) + (xy 132.23479 75.232064) (xy 132.211678 75.2348) (xy 130.431622 75.2348) (xy 130.373431 75.215893) + (xy 130.337467 75.166393) (xy 130.337467 75.105207) (xy 130.373431 75.055707) (xy 130.393737 75.044336) + (xy 130.525564 74.989732) (xy 130.689432 74.880239) (xy 130.828789 74.740882) (xy 130.938282 74.577014) + (xy 131.013701 74.394935) (xy 131.05215 74.201641) (xy 131.05215 74.004559) (xy 131.013701 73.811265) + (xy 130.938282 73.629186) (xy 130.828789 73.465318) (xy 130.689432 73.325961) (xy 130.560128 73.239563) + (xy 130.525563 73.216467) (xy 130.343485 73.141049) (xy 130.150193 73.1026) (xy 130.150191 73.1026) + (xy 129.953109 73.1026) (xy 129.953106 73.1026) (xy 129.759815 73.141049) (xy 129.759813 73.141049) + (xy 129.577736 73.216467) (xy 129.413868 73.325961) (xy 129.413864 73.325964) (xy 129.274514 73.465314) + (xy 129.274511 73.465318) (xy 129.165017 73.629186) (xy 129.089599 73.811263) (xy 129.089599 73.811265) + (xy 129.05115 74.004556) (xy 129.05115 74.201643) (xy 129.089599 74.394934) (xy 129.089599 74.394936) + (xy 129.165017 74.577013) (xy 129.182448 74.6031) (xy 129.274511 74.740882) (xy 129.413868 74.880239) + (xy 129.577736 74.989732) (xy 129.703452 75.041805) (xy 129.709563 75.044336) (xy 129.756089 75.084072) + (xy 129.770373 75.143567) (xy 129.746959 75.200095) (xy 129.69479 75.232064) (xy 129.671678 75.2348) + (xy 127.940477 75.2348) (xy 127.840822 75.2348) (xy 127.748753 75.272936) (xy 127.744402 75.277286) + (xy 127.744401 75.277287) (xy 127.590784 75.430904) (xy 127.536268 75.458681) (xy 127.520781 75.4599) + (xy 116.588119 75.4599) (xy 116.529928 75.440993) (xy 116.493964 75.391493) (xy 116.493964 75.330307) + (xy 116.518115 75.290897) (xy 116.789625 75.019385) (xy 116.844142 74.991607) (xy 116.897512 74.997923) + (xy 117.059815 75.065151) (xy 117.253109 75.1036) (xy 117.25311 75.1036) (xy 117.45019 75.1036) + (xy 117.450191 75.1036) (xy 117.643485 75.065151) (xy 117.825564 74.989732) (xy 117.989432 74.880239) + (xy 118.128789 74.740882) (xy 118.238282 74.577014) (xy 118.313701 74.394935) (xy 118.35215 74.201641) + (xy 118.35215 74.004559) (xy 118.313701 73.811265) (xy 118.238282 73.629186) (xy 118.128789 73.465318) + (xy 118.034375 73.370904) (xy 118.006598 73.316387) (xy 118.016169 73.255955) (xy 118.059434 73.21269) + (xy 118.104379 73.2019) (xy 119.119079 73.2019) (xy 119.12211 73.201297) (xy 119.127206 73.2019) + (xy 119.128829 73.2019) (xy 119.128829 73.202092) (xy 119.182871 73.208487) (xy 119.227802 73.250019) + (xy 119.23974 73.310028) (xy 119.214125 73.365594) (xy 119.21143 73.368397) (xy 119.114519 73.465308) + (xy 119.114511 73.465318) (xy 119.005017 73.629186) (xy 118.929599 73.811263) (xy 118.929599 73.811265) + (xy 118.89115 74.004556) (xy 118.89115 74.201643) (xy 118.929599 74.394934) (xy 118.929599 74.394936) + (xy 119.005017 74.577013) (xy 119.022448 74.6031) (xy 119.114511 74.740882) (xy 119.253868 74.880239) + (xy 119.417736 74.989732) (xy 119.599815 75.065151) (xy 119.793109 75.1036) (xy 119.79311 75.1036) + (xy 119.99019 75.1036) (xy 119.990191 75.1036) (xy 120.183485 75.065151) (xy 120.365564 74.989732) + (xy 120.529432 74.880239) (xy 120.668789 74.740882) (xy 120.778282 74.577014) (xy 120.853701 74.394935) + (xy 120.89215 74.201641) (xy 120.89215 74.004559) (xy 120.892149 74.004556) (xy 121.43115 74.004556) + (xy 121.43115 74.201643) (xy 121.469599 74.394934) (xy 121.469599 74.394936) (xy 121.545017 74.577013) + (xy 121.562448 74.6031) (xy 121.654511 74.740882) (xy 121.793868 74.880239) (xy 121.957736 74.989732) + (xy 122.139815 75.065151) (xy 122.333109 75.1036) (xy 122.33311 75.1036) (xy 122.53019 75.1036) + (xy 122.530191 75.1036) (xy 122.723485 75.065151) (xy 122.905564 74.989732) (xy 123.069432 74.880239) + (xy 123.208789 74.740882) (xy 123.318282 74.577014) (xy 123.393701 74.394935) (xy 123.43215 74.201641) + (xy 123.43215 74.004559) (xy 123.432149 74.004556) (xy 123.97115 74.004556) (xy 123.97115 74.201643) + (xy 124.009599 74.394934) (xy 124.009599 74.394936) (xy 124.085017 74.577013) (xy 124.102448 74.6031) + (xy 124.194511 74.740882) (xy 124.333868 74.880239) (xy 124.497736 74.989732) (xy 124.679815 75.065151) + (xy 124.873109 75.1036) (xy 124.87311 75.1036) (xy 125.07019 75.1036) (xy 125.070191 75.1036) (xy 125.263485 75.065151) + (xy 125.445564 74.989732) (xy 125.609432 74.880239) (xy 125.748789 74.740882) (xy 125.858282 74.577014) + (xy 125.933701 74.394935) (xy 125.97215 74.201641) (xy 125.97215 74.004559) (xy 125.972149 74.004556) + (xy 126.51115 74.004556) (xy 126.51115 74.201643) (xy 126.549599 74.394934) (xy 126.549599 74.394936) + (xy 126.625017 74.577013) (xy 126.642448 74.6031) (xy 126.734511 74.740882) (xy 126.873868 74.880239) + (xy 127.037736 74.989732) (xy 127.219815 75.065151) (xy 127.413109 75.1036) (xy 127.41311 75.1036) + (xy 127.61019 75.1036) (xy 127.610191 75.1036) (xy 127.803485 75.065151) (xy 127.985564 74.989732) + (xy 128.149432 74.880239) (xy 128.288789 74.740882) (xy 128.398282 74.577014) (xy 128.473701 74.394935) + (xy 128.51215 74.201641) (xy 128.51215 74.004559) (xy 128.473701 73.811265) (xy 128.398282 73.629186) + (xy 128.288789 73.465318) (xy 128.149432 73.325961) (xy 128.020128 73.239563) (xy 127.985563 73.216467) + (xy 127.803485 73.141049) (xy 127.610193 73.1026) (xy 127.610191 73.1026) (xy 127.413109 73.1026) + (xy 127.413106 73.1026) (xy 127.219815 73.141049) (xy 127.219813 73.141049) (xy 127.037736 73.216467) + (xy 126.873868 73.325961) (xy 126.873864 73.325964) (xy 126.734514 73.465314) (xy 126.734511 73.465318) + (xy 126.625017 73.629186) (xy 126.549599 73.811263) (xy 126.549599 73.811265) (xy 126.51115 74.004556) + (xy 125.972149 74.004556) (xy 125.933701 73.811265) (xy 125.858282 73.629186) (xy 125.748789 73.465318) + (xy 125.609432 73.325961) (xy 125.480128 73.239563) (xy 125.445563 73.216467) (xy 125.263485 73.141049) + (xy 125.070193 73.1026) (xy 125.070191 73.1026) (xy 124.873109 73.1026) (xy 124.873106 73.1026) + (xy 124.679815 73.141049) (xy 124.679813 73.141049) (xy 124.497736 73.216467) (xy 124.333868 73.325961) + (xy 124.333864 73.325964) (xy 124.194514 73.465314) (xy 124.194511 73.465318) (xy 124.085017 73.629186) + (xy 124.009599 73.811263) (xy 124.009599 73.811265) (xy 123.97115 74.004556) (xy 123.432149 74.004556) + (xy 123.393701 73.811265) (xy 123.318282 73.629186) (xy 123.208789 73.465318) (xy 123.069432 73.325961) + (xy 122.940128 73.239563) (xy 122.905563 73.216467) (xy 122.723485 73.141049) (xy 122.530193 73.1026) + (xy 122.530191 73.1026) (xy 122.333109 73.1026) (xy 122.333106 73.1026) (xy 122.139815 73.141049) + (xy 122.139813 73.141049) (xy 121.957736 73.216467) (xy 121.793868 73.325961) (xy 121.793864 73.325964) + (xy 121.654514 73.465314) (xy 121.654511 73.465318) (xy 121.545017 73.629186) (xy 121.469599 73.811263) + (xy 121.469599 73.811265) (xy 121.43115 74.004556) (xy 120.892149 74.004556) (xy 120.853701 73.811265) + (xy 120.786473 73.648963) (xy 120.781673 73.587968) (xy 120.807935 73.541075) (xy 121.502716 72.846296) + (xy 121.557232 72.818519) (xy 121.572719 72.8173) (xy 152.079954 72.8173) (xy 152.138145 72.836207) + (xy 152.174109 72.885707) (xy 152.174109 72.946893) (xy 152.150608 72.979239) (xy 152.149932 72.987828) + (xy 152.782241 73.620137) (xy 152.718657 73.637175) (xy 152.604643 73.703001) (xy 152.511551 73.796093) + (xy 152.445725 73.910107) (xy 152.428687 73.973691) (xy 151.796378 73.341382) (xy 151.757028 73.395542) + (xy 151.757026 73.395546) (xy 151.660554 73.584884) (xy 151.59489 73.786978) (xy 151.563692 73.983956) + (xy 151.535914 74.038473) (xy 151.481398 74.06625) (xy 151.420966 74.056679) (xy 151.377701 74.013414) + (xy 151.368813 73.987783) (xy 151.368052 73.983956) (xy 151.333701 73.811265) (xy 151.258282 73.629186) + (xy 151.148789 73.465318) (xy 151.009432 73.325961) (xy 150.880128 73.239563) (xy 150.845563 73.216467) + (xy 150.663485 73.141049) (xy 150.470193 73.1026) (xy 150.470191 73.1026) (xy 150.273109 73.1026) + (xy 150.273106 73.1026) (xy 150.079815 73.141049) (xy 150.079813 73.141049) (xy 149.897736 73.216467) + (xy 149.733868 73.325961) (xy 149.733864 73.325964) (xy 149.594514 73.465314) (xy 149.594511 73.465318) + (xy 149.485017 73.629186) (xy 149.409599 73.811263) (xy 149.409599 73.811265) (xy 149.37115 74.004556) + (xy 149.37115 74.201643) (xy 149.409599 74.394934) (xy 149.409599 74.394936) (xy 149.485017 74.577013) + (xy 149.502448 74.6031) (xy 149.594511 74.740882) (xy 149.733868 74.880239) (xy 149.897736 74.989732) + (xy 150.079815 75.065151) (xy 150.273109 75.1036) (xy 150.27311 75.1036) (xy 150.47019 75.1036) + (xy 150.470191 75.1036) (xy 150.663485 75.065151) (xy 150.845564 74.989732) (xy 151.009432 74.880239) + (xy 151.148789 74.740882) (xy 151.258282 74.577014) (xy 151.333701 74.394935) (xy 151.368813 74.218415) + (xy 151.39871 74.165032) (xy 151.454275 74.139416) (xy 151.514285 74.151353) (xy 151.555817 74.196283) + (xy 151.563692 74.222243) (xy 151.59489 74.419221) (xy 151.660554 74.621315) (xy 151.757026 74.810653) + (xy 151.75703 74.810659) (xy 151.796378 74.864816) (xy 151.796379 74.864816) (xy 152.428687 74.232507) + (xy 152.445725 74.296093) (xy 152.511551 74.410107) (xy 152.604643 74.503199) (xy 152.718657 74.569025) + (xy 152.782239 74.586062) (xy 152.149932 75.218369) (xy 152.149932 75.21837) (xy 152.20409 75.257719) + (xy 152.204096 75.257723) (xy 152.393434 75.354195) (xy 152.595528 75.419859) (xy 152.8054 75.4531) + (xy 153.0179 75.4531) (xy 153.227771 75.419859) (xy 153.429865 75.354195) (xy 153.619206 75.25772) + (xy 153.673366 75.21837) (xy 153.041058 74.586062) (xy 153.104643 74.569025) (xy 153.218657 74.503199) + (xy 153.311749 74.410107) (xy 153.377575 74.296093) (xy 153.394612 74.232508) (xy 154.02692 74.864816) + (xy 154.06627 74.810656) (xy 154.162745 74.621315) (xy 154.228409 74.419221) (xy 154.259607 74.222243) + (xy 154.287384 74.167727) (xy 154.341901 74.139949) (xy 154.402333 74.14952) (xy 154.445598 74.192785) + (xy 154.454486 74.218415) (xy 154.489599 74.394936) (xy 154.565017 74.577013) (xy 154.582448 74.6031) + (xy 154.674511 74.740882) (xy 154.813868 74.880239) (xy 154.977736 74.989732) (xy 155.159815 75.065151) + (xy 155.353109 75.1036) (xy 155.35311 75.1036) (xy 155.55019 75.1036) (xy 155.550191 75.1036) (xy 155.743485 75.065151) + (xy 155.925564 74.989732) (xy 156.089432 74.880239) (xy 156.228789 74.740882) (xy 156.338282 74.577014) + (xy 156.413701 74.394935) (xy 156.45215 74.201641) (xy 156.45215 74.133272) (xy 173.36615 74.133272) + (xy 173.36615 75.512927) (xy 173.374882 75.55682) (xy 173.374884 75.556824) (xy 173.407388 75.60547) + (xy 173.408146 75.606604) (xy 173.457928 75.639867) (xy 173.468977 75.642064) (xy 173.501822 75.648599) + (xy 173.501828 75.648599) (xy 173.50183 75.6486) (xy 173.501831 75.6486) (xy 174.881469 75.6486) + (xy 174.88147 75.6486) (xy 174.881471 75.648599) (xy 174.881477 75.648599) (xy 174.903273 75.644262) + (xy 174.925372 75.639867) (xy 174.975154 75.606604) (xy 175.008417 75.556822) (xy 175.010585 75.545924) + (xy 195.366649 75.545924) (xy 195.373051 75.60547) (xy 195.373053 75.605481) (xy 195.423296 75.740188) + (xy 195.423297 75.74019) (xy 195.509457 75.855284) (xy 195.509465 75.855292) (xy 195.624559 75.941452) + (xy 195.624561 75.941453) (xy 195.759268 75.991696) (xy 195.759279 75.991698) (xy 195.818826 75.9981) + (xy 195.964129 75.9981) (xy 196.02232 76.017007) (xy 196.058284 76.066507) (xy 196.058284 76.127693) + (xy 196.02232 76.177193) (xy 196.019133 76.179414) (xy 196.015428 76.181889) (xy 195.900439 76.296878) + (xy 195.8101 76.432081) (xy 195.747874 76.582309) (xy 195.71615 76.741794) (xy 195.71615 76.904405) + (xy 195.747874 77.06389) (xy 195.8101 77.214118) (xy 195.810101 77.21412) (xy 195.810102 77.214121) + (xy 195.900442 77.349325) (xy 196.015425 77.464308) (xy 196.150629 77.554648) (xy 196.15063 77.554648) + (xy 196.150631 77.554649) (xy 196.225745 77.585762) (xy 196.300861 77.616876) (xy 196.460345 77.6486) + (xy 196.460346 77.6486) (xy 196.622954 77.6486) (xy 196.622955 77.6486) (xy 196.782439 77.616876) + (xy 196.932671 77.554648) (xy 197.067875 77.464308) (xy 197.182858 77.349325) (xy 197.200382 77.323099) + (xy 208.689418 77.323099) (xy 208.689419 77.3231) (xy 209.733638 77.3231) (xy 209.700725 77.380107) + (xy 209.66665 77.507274) (xy 209.66665 77.638926) (xy 209.700725 77.766093) (xy 209.733638 77.8231) + (xy 208.689419 77.8231) (xy 208.699891 77.889222) (xy 208.765554 78.091315) (xy 208.862025 78.280652) + (xy 208.986927 78.452564) (xy 209.137185 78.602822) (xy 209.309097 78.727724) (xy 209.498436 78.824196) + (xy 209.668478 78.879445) (xy 209.717978 78.915409) (xy 209.736886 78.973599) (xy 209.717979 79.03179) + (xy 209.668479 79.067754) (xy 209.637886 79.0726) (xy 209.385128 79.0726) (xy 209.385126 79.072601) + (xy 209.29135 79.087452) (xy 209.291345 79.087454) (xy 209.178309 79.145049) (xy 209.088599 79.234759) + (xy 209.031004 79.347795) (xy 209.01615 79.441578) (xy 209.01615 80.704621) (xy 209.016151 80.704623) + (xy 209.031002 80.798399) (xy 209.031004 80.798404) (xy 209.0886 80.911442) (xy 209.178308 81.00115) + (xy 209.291346 81.058746) (xy 209.385131 81.0736) (xy 210.948168 81.073599) (xy 210.948171 81.073599) + (xy 210.948172 81.073598) (xy 210.995061 81.066172) (xy 211.041949 81.058747) (xy 211.041949 81.058746) + (xy 211.041954 81.058746) (xy 211.154992 81.00115) (xy 211.2447 80.911442) (xy 211.302296 80.798404) + (xy 211.31715 80.704619) (xy 211.317149 79.441582) (xy 211.317149 79.441581) (xy 211.317149 79.441578) + (xy 211.317148 79.441576) (xy 211.302297 79.3478) (xy 211.302296 79.347798) (xy 211.302296 79.347796) + (xy 211.2447 79.234758) (xy 211.154992 79.14505) (xy 211.041954 79.087454) (xy 211.041955 79.087454) + (xy 210.948172 79.0726) (xy 210.695416 79.0726) (xy 210.637225 79.053693) (xy 210.601261 79.004193) + (xy 210.601261 78.943007) (xy 210.637225 78.893507) (xy 210.664824 78.879445) (xy 210.834863 78.824196) + (xy 211.024202 78.727724) (xy 211.196114 78.602822) (xy 211.346372 78.452564) (xy 211.471274 78.280652) + (xy 211.567745 78.091315) (xy 211.633408 77.889222) (xy 211.643881 77.8231) (xy 210.599662 77.8231) + (xy 210.632575 77.766093) (xy 210.66665 77.638926) (xy 210.66665 77.507274) (xy 210.632575 77.380107) + (xy 210.599662 77.3231) (xy 211.643881 77.3231) (xy 211.643881 77.323099) (xy 211.633408 77.256977) + (xy 211.567745 77.054884) (xy 211.471274 76.865547) (xy 211.346372 76.693635) (xy 211.196114 76.543377) + (xy 211.024202 76.418475) (xy 210.834865 76.322004) (xy 210.632771 76.25634) (xy 210.4229 76.2231) + (xy 210.416651 76.2231) (xy 210.41665 76.223101) (xy 210.41665 77.140088) (xy 210.359643 77.107175) + (xy 210.232476 77.0731) (xy 210.100824 77.0731) (xy 209.973657 77.107175) (xy 209.91665 77.140088) + (xy 209.91665 76.223101) (xy 209.916649 76.2231) (xy 209.9104 76.2231) (xy 209.700528 76.25634) + (xy 209.498434 76.322004) (xy 209.309097 76.418475) (xy 209.137185 76.543377) (xy 208.986927 76.693635) + (xy 208.862025 76.865547) (xy 208.765554 77.054884) (xy 208.699891 77.256977) (xy 208.689418 77.323099) + (xy 197.200382 77.323099) (xy 197.273198 77.214121) (xy 197.335426 77.063889) (xy 197.36715 76.904405) + (xy 197.36715 76.741795) (xy 197.335426 76.582311) (xy 197.273198 76.432079) (xy 197.182858 76.296875) + (xy 197.067875 76.181892) (xy 197.067871 76.181889) (xy 197.064167 76.179414) (xy 197.026289 76.131363) + (xy 197.023889 76.070225) (xy 197.057883 76.019352) (xy 197.115287 75.998176) (xy 197.119171 75.9981) + (xy 197.264474 75.9981) (xy 197.32402 75.991698) (xy 197.324031 75.991696) (xy 197.458738 75.941453) + (xy 197.45874 75.941452) (xy 197.573834 75.855292) (xy 197.573842 75.855284) (xy 197.660002 75.74019) + (xy 197.660003 75.740188) (xy 197.710246 75.605481) (xy 197.710248 75.60547) (xy 197.71665 75.545924) + (xy 197.71665 75.073101) (xy 197.716649 75.0731) (xy 196.857336 75.0731) (xy 196.86173 75.068706) + (xy 196.914391 74.977494) (xy 196.94165 74.875761) (xy 196.94165 74.770439) (xy 196.914391 74.668706) + (xy 196.86173 74.577494) (xy 196.857336 74.5731) (xy 197.716649 74.5731) (xy 197.71665 74.573099) + (xy 197.71665 74.100275) (xy 197.710248 74.040729) (xy 197.710246 74.040718) (xy 197.660003 73.906011) + (xy 197.660002 73.906009) (xy 197.573842 73.790915) (xy 197.573834 73.790907) (xy 197.45874 73.704747) + (xy 197.458738 73.704746) (xy 197.324031 73.654503) (xy 197.32402 73.654501) (xy 197.264474 73.6481) + (xy 196.791651 73.6481) (xy 196.79165 73.648101) (xy 196.79165 74.507414) (xy 196.787256 74.50302) + (xy 196.696044 74.450359) (xy 196.594311 74.4231) (xy 196.488989 74.4231) (xy 196.387256 74.450359) + (xy 196.296044 74.50302) (xy 196.29165 74.507414) (xy 196.29165 73.648101) (xy 196.291649 73.6481) + (xy 195.818826 73.6481) (xy 195.759279 73.654501) (xy 195.759268 73.654503) (xy 195.624561 73.704746) + (xy 195.624559 73.704747) (xy 195.509465 73.790907) (xy 195.509457 73.790915) (xy 195.423297 73.906009) + (xy 195.423296 73.906011) (xy 195.373053 74.040718) (xy 195.373051 74.040729) (xy 195.36665 74.100275) + (xy 195.36665 74.573099) (xy 195.366651 74.5731) (xy 196.225964 74.5731) (xy 196.22157 74.577494) + (xy 196.168909 74.668706) (xy 196.14165 74.770439) (xy 196.14165 74.875761) (xy 196.168909 74.977494) + (xy 196.22157 75.068706) (xy 196.225964 75.0731) (xy 195.366651 75.0731) (xy 195.36665 75.073101) + (xy 195.36665 75.545924) (xy 195.366649 75.545924) (xy 175.010585 75.545924) (xy 175.01715 75.51292) + (xy 175.01715 74.13328) (xy 175.013899 74.116935) (xy 175.013899 74.116933) (xy 175.008417 74.089379) + (xy 175.008415 74.089375) (xy 175.007973 74.088714) (xy 174.975154 74.039596) (xy 174.93597 74.013414) + (xy 174.925374 74.006334) (xy 174.92537 74.006332) (xy 174.881477 73.9976) (xy 174.88147 73.9976) + (xy 173.50183 73.9976) (xy 173.501822 73.9976) (xy 173.457929 74.006332) (xy 173.457925 74.006334) + (xy 173.408148 74.039594) (xy 173.408144 74.039598) (xy 173.374884 74.089375) (xy 173.374882 74.089379) + (xy 173.36615 74.133272) (xy 156.45215 74.133272) (xy 156.45215 74.004559) (xy 156.413701 73.811265) + (xy 156.338282 73.629186) (xy 156.228789 73.465318) (xy 156.089432 73.325961) (xy 155.960128 73.239563) + (xy 155.925563 73.216467) (xy 155.743485 73.141049) (xy 155.550193 73.1026) (xy 155.550191 73.1026) + (xy 155.353109 73.1026) (xy 155.353106 73.1026) (xy 155.159815 73.141049) (xy 155.159813 73.141049) + (xy 154.977736 73.216467) (xy 154.813868 73.325961) (xy 154.813864 73.325964) (xy 154.674514 73.465314) + (xy 154.674511 73.465318) (xy 154.565017 73.629186) (xy 154.489599 73.811263) (xy 154.454486 73.987784) + (xy 154.424589 74.041167) (xy 154.369023 74.066783) (xy 154.309014 74.054846) (xy 154.267481 74.009916) + (xy 154.259607 73.983956) (xy 154.228409 73.786978) (xy 154.162745 73.584884) (xy 154.066273 73.395546) + (xy 154.066269 73.39554) (xy 154.02692 73.341382) (xy 154.026919 73.341382) (xy 153.394612 73.973689) + (xy 153.377575 73.910107) (xy 153.311749 73.796093) (xy 153.218657 73.703001) (xy 153.104643 73.637175) + (xy 153.041057 73.620137) (xy 153.673366 72.987829) (xy 153.67269 72.97924) (xy 153.649189 72.946893) + (xy 153.649189 72.885708) (xy 153.685153 72.836207) (xy 153.743344 72.8173) (xy 170.653179 72.8173) + (xy 170.711235 72.793251) (xy 170.745247 72.779164) (xy 173.332833 70.191578) (xy 209.01615 70.191578) + (xy 209.01615 71.454621) (xy 209.016151 71.454623) (xy 209.031002 71.548399) (xy 209.031004 71.548404) + (xy 209.0886 71.661442) (xy 209.178308 71.75115) (xy 209.291346 71.808746) (xy 209.385131 71.8236) + (xy 210.948168 71.823599) (xy 210.948171 71.823599) (xy 210.948172 71.823598) (xy 210.995061 71.816172) + (xy 211.041949 71.808747) (xy 211.041949 71.808746) (xy 211.041954 71.808746) (xy 211.154992 71.75115) + (xy 211.2447 71.661442) (xy 211.302296 71.548404) (xy 211.31715 71.454619) (xy 211.317149 70.191582) + (xy 211.317149 70.191581) (xy 211.317149 70.191578) (xy 211.317148 70.191576) (xy 211.302297 70.0978) + (xy 211.302296 70.097798) (xy 211.302296 70.097796) (xy 211.2447 69.984758) (xy 211.154992 69.89505) + (xy 211.041954 69.837454) (xy 211.041955 69.837454) (xy 210.948171 69.8226) (xy 209.385128 69.8226) + (xy 209.385126 69.822601) (xy 209.29135 69.837452) (xy 209.291345 69.837454) (xy 209.178309 69.895049) + (xy 209.088599 69.984759) (xy 209.031004 70.097795) (xy 209.01615 70.191578) (xy 173.332833 70.191578) + (xy 175.299855 68.224556) (xy 209.01615 68.224556) (xy 209.01615 68.421643) (xy 209.054599 68.614934) + (xy 209.054599 68.614936) (xy 209.130017 68.797013) (xy 209.164273 68.848281) (xy 209.239511 68.960882) + (xy 209.378868 69.100239) (xy 209.542736 69.209732) (xy 209.724815 69.285151) (xy 209.918109 69.3236) + (xy 209.91811 69.3236) (xy 210.41519 69.3236) (xy 210.415191 69.3236) (xy 210.608485 69.285151) + (xy 210.790564 69.209732) (xy 210.954432 69.100239) (xy 211.093789 68.960882) (xy 211.203282 68.797014) + (xy 211.278701 68.614935) (xy 211.31715 68.421641) (xy 211.31715 68.224559) (xy 211.278701 68.031265) + (xy 211.203282 67.849186) (xy 211.093789 67.685318) (xy 210.954432 67.545961) (xy 210.811415 67.4504) + (xy 210.790563 67.436467) (xy 210.608485 67.361049) (xy 210.415193 67.3226) (xy 210.415191 67.3226) + (xy 209.918109 67.3226) (xy 209.918106 67.3226) (xy 209.724815 67.361049) (xy 209.724813 67.361049) + (xy 209.542736 67.436467) (xy 209.378868 67.545961) (xy 209.378864 67.545964) (xy 209.239514 67.685314) + (xy 209.239511 67.685318) (xy 209.130017 67.849186) (xy 209.054599 68.031263) (xy 209.054599 68.031265) + (xy 209.01615 68.224556) (xy 175.299855 68.224556) (xy 177.589361 65.93505) (xy 188.13365 65.93505) + (xy 188.13365 66.116149) (xy 188.161978 66.295006) (xy 188.161979 66.295009) (xy 188.217939 66.467239) + (xy 188.300154 66.628594) (xy 188.406597 66.775101) (xy 188.534649 66.903153) (xy 188.681156 67.009596) + (xy 188.842511 67.091811) (xy 189.014741 67.147771) (xy 189.086286 67.159102) (xy 189.193601 67.1761) + (xy 189.193604 67.1761) (xy 189.374699 67.1761) (xy 189.464127 67.161935) (xy 189.553559 67.147771) + (xy 189.725789 67.091811) (xy 189.887144 67.009596) (xy 190.033651 66.903153) (xy 190.161703 66.775101) + (xy 190.268146 66.628594) (xy 190.350361 66.467239) (xy 190.406321 66.295009) (xy 190.43465 66.116146) + (xy 190.43465 65.935054) (xy 190.43465 65.93505) (xy 193.21365 65.93505) (xy 193.21365 66.116149) + (xy 193.241978 66.295006) (xy 193.241979 66.295009) (xy 193.297939 66.467239) (xy 193.380154 66.628594) + (xy 193.486597 66.775101) (xy 193.614649 66.903153) (xy 193.761156 67.009596) (xy 193.922511 67.091811) + (xy 194.094741 67.147771) (xy 194.166286 67.159102) (xy 194.273601 67.1761) (xy 194.273604 67.1761) + (xy 194.454699 67.1761) (xy 194.544127 67.161935) (xy 194.633559 67.147771) (xy 194.805789 67.091811) + (xy 194.967144 67.009596) (xy 195.113651 66.903153) (xy 195.241703 66.775101) (xy 195.348146 66.628594) + (xy 195.430361 66.467239) (xy 195.486321 66.295009) (xy 195.51465 66.116146) (xy 195.51465 65.935054) + (xy 195.51465 65.93505) (xy 195.488728 65.77139) (xy 195.486321 65.756191) (xy 195.430361 65.583961) + (xy 195.348146 65.422606) (xy 195.241703 65.276099) (xy 195.113651 65.148047) (xy 194.967144 65.041604) + (xy 194.967143 65.041603) (xy 194.967141 65.041602) (xy 194.805787 64.959388) (xy 194.633556 64.903428) + (xy 194.454699 64.8751) (xy 194.454696 64.8751) (xy 194.273604 64.8751) (xy 194.273601 64.8751) + (xy 194.094743 64.903428) (xy 193.922512 64.959388) (xy 193.761158 65.041602) (xy 193.687902 65.094825) + (xy 193.614649 65.148047) (xy 193.486597 65.276099) (xy 193.433375 65.349352) (xy 193.380152 65.422608) + (xy 193.297938 65.583962) (xy 193.241978 65.756193) (xy 193.21365 65.93505) (xy 190.43465 65.93505) + (xy 190.408728 65.77139) (xy 190.406321 65.756191) (xy 190.350361 65.583961) (xy 190.268146 65.422606) + (xy 190.161703 65.276099) (xy 190.033651 65.148047) (xy 189.887144 65.041604) (xy 189.887143 65.041603) + (xy 189.887141 65.041602) (xy 189.725787 64.959388) (xy 189.553556 64.903428) (xy 189.374699 64.8751) + (xy 189.374696 64.8751) (xy 189.193604 64.8751) (xy 189.193601 64.8751) (xy 189.014743 64.903428) + (xy 188.842512 64.959388) (xy 188.681158 65.041602) (xy 188.607902 65.094825) (xy 188.534649 65.148047) + (xy 188.406597 65.276099) (xy 188.353375 65.349352) (xy 188.300152 65.422608) (xy 188.217938 65.583962) + (xy 188.161978 65.756193) (xy 188.13365 65.93505) (xy 177.589361 65.93505) (xy 181.600315 61.924096) + (xy 181.654832 61.896319) (xy 181.670319 61.8951) (xy 188.634979 61.8951) (xy 188.693035 61.871051) + (xy 188.727047 61.856964) (xy 192.26896 58.31505) (xy 193.21365 58.31505) (xy 193.21365 58.496149) + (xy 193.241978 58.675006) (xy 193.297938 58.847237) (xy 193.365398 58.979635) (xy 193.380154 59.008594) + (xy 193.486597 59.155101) (xy 193.614649 59.283153) (xy 193.761156 59.389596) (xy 193.922511 59.471811) + (xy 194.094741 59.527771) (xy 194.166286 59.539102) (xy 194.273601 59.5561) (xy 194.273604 59.5561) + (xy 194.454699 59.5561) (xy 194.544127 59.541935) (xy 194.633559 59.527771) (xy 194.805789 59.471811) + (xy 194.967144 59.389596) (xy 195.113651 59.283153) (xy 195.241703 59.155101) (xy 195.348146 59.008594) + (xy 195.430361 58.847239) (xy 195.486321 58.675009) (xy 195.51465 58.496146) (xy 195.51465 58.315054) + (xy 195.51465 58.31505) (xy 195.486321 58.136193) (xy 195.486321 58.136191) (xy 195.430361 57.963961) + (xy 195.348146 57.802606) (xy 195.241703 57.656099) (xy 195.113651 57.528047) (xy 194.967144 57.421604) + (xy 194.967143 57.421603) (xy 194.967141 57.421602) (xy 194.805787 57.339388) (xy 194.633556 57.283428) + (xy 194.454699 57.2551) (xy 194.454696 57.2551) (xy 194.273604 57.2551) (xy 194.273601 57.2551) + (xy 194.094743 57.283428) (xy 193.922512 57.339388) (xy 193.761158 57.421602) (xy 193.738079 57.43837) + (xy 193.614649 57.528047) (xy 193.486597 57.656099) (xy 193.433375 57.729352) (xy 193.380152 57.802608) + (xy 193.297938 57.963962) (xy 193.241978 58.136193) (xy 193.21365 58.31505) (xy 192.26896 58.31505) + (xy 193.692581 56.891428) (xy 193.747096 56.863653) (xy 193.807528 56.873224) (xy 193.922511 56.931811) + (xy 194.094741 56.987771) (xy 194.132138 56.993694) (xy 194.273601 57.0161) (xy 194.273604 57.0161) + (xy 194.454699 57.0161) (xy 194.544127 57.001935) (xy 194.633559 56.987771) (xy 194.805789 56.931811) + (xy 194.967144 56.849596) (xy 195.113651 56.743153) (xy 195.241703 56.615101) (xy 195.348146 56.468594) + (xy 195.430361 56.307239) (xy 195.486321 56.135009) (xy 195.502753 56.031263) (xy 195.51465 55.956149) + (xy 195.51465 55.77505) (xy 195.493134 55.639208) (xy 195.486321 55.596191) (xy 195.430361 55.423961) + (xy 195.348146 55.262606) (xy 195.241703 55.116099) (xy 195.113651 54.988047) (xy 194.967144 54.881604) + (xy 194.967143 54.881603) (xy 194.967141 54.881602) (xy 194.805787 54.799388) (xy 194.633556 54.743428) + (xy 194.454699 54.7151) (xy 194.454696 54.7151) (xy 194.273604 54.7151) (xy 194.273601 54.7151) + (xy 194.094743 54.743428) (xy 193.922512 54.799388) (xy 193.761158 54.881602) (xy 193.687902 54.934825) + (xy 193.614649 54.988047) (xy 193.486597 55.116099) (xy 193.481516 55.123093) (xy 193.380152 55.262608) + (xy 193.297938 55.423962) (xy 193.241978 55.596193) (xy 193.21365 55.77505) (xy 193.21365 55.956149) + (xy 193.241978 56.135006) (xy 193.297939 56.30724) (xy 193.356524 56.422218) (xy 193.366096 56.482651) + (xy 193.338319 56.537167) (xy 193.338319 56.537168) (xy 188.510385 61.365104) (xy 188.455868 61.392881) + (xy 188.440381 61.3941) (xy 182.134922 61.3941) (xy 182.076731 61.375193) (xy 182.040767 61.325693) + (xy 182.040767 61.264507) (xy 182.051503 61.244099) (xy 182.050695 61.243633) (xy 182.113247 61.13529) + (xy 182.113247 61.135288) (xy 182.113249 61.135286) (xy 182.14395 61.020709) (xy 182.14395 60.902091) + (xy 182.113249 60.787514) (xy 182.113247 60.787511) (xy 182.113247 60.787509) (xy 182.053942 60.684791) + (xy 182.05394 60.684789) (xy 182.053939 60.684787) (xy 181.970063 60.600911) (xy 181.97006 60.600909) + (xy 181.970058 60.600907) (xy 181.867339 60.541602) (xy 181.86734 60.541602) (xy 181.853801 60.537974) + (xy 181.752759 60.5109) (xy 181.634141 60.5109) (xy 181.577034 60.526202) (xy 181.519559 60.541602) + (xy 181.416841 60.600907) (xy 181.332957 60.684791) (xy 181.273652 60.787509) (xy 181.257282 60.848605) + (xy 181.246005 60.890692) (xy 181.24295 60.902092) (xy 181.24295 60.962431) (xy 181.224043 61.020622) + (xy 181.213954 61.032435) (xy 180.174785 62.071604) (xy 180.120268 62.099381) (xy 180.104781 62.1006) + (xy 161.988959 62.1006) (xy 161.930768 62.081693) (xy 161.894804 62.032193) (xy 161.894804 61.971007) + (xy 161.918953 61.931598) (xy 162.002739 61.847813) (xy 162.002742 61.847808) (xy 162.062047 61.74509) + (xy 162.062047 61.745088) (xy 162.062049 61.745086) (xy 162.09275 61.630509) (xy 162.09275 61.511891) + (xy 162.062049 61.397314) (xy 162.062047 61.397311) (xy 162.062047 61.397309) (xy 162.002742 61.294591) + (xy 162.00274 61.294589) (xy 162.002739 61.294587) (xy 161.918863 61.210711) (xy 161.91886 61.210709) + (xy 161.918858 61.210707) (xy 161.816139 61.151402) (xy 161.81614 61.151402) (xy 161.802601 61.147774) + (xy 161.701559 61.1207) (xy 161.582941 61.1207) (xy 161.56836 61.124607) (xy 161.507259 61.121404) + (xy 161.459709 61.082899) (xy 161.443874 61.023798) (xy 161.465801 60.966677) (xy 161.472734 60.958976) + (xy 161.827114 60.604596) (xy 161.881631 60.576819) (xy 161.897118 60.5756) (xy 164.073741 60.5756) + (xy 164.131932 60.594507) (xy 164.143738 60.60459) (xy 164.224737 60.685589) (xy 164.224739 60.68559) + (xy 164.224741 60.685592) (xy 164.32746 60.744897) (xy 164.327461 60.744897) (xy 164.327464 60.744899) + (xy 164.442041 60.7756) (xy 164.442043 60.7756) (xy 164.560657 60.7756) (xy 164.560659 60.7756) + (xy 164.675236 60.744899) (xy 164.675238 60.744897) (xy 164.67524 60.744897) (xy 164.777958 60.685592) + (xy 164.777958 60.685591) (xy 164.777963 60.685589) (xy 164.861839 60.601713) (xy 164.862304 60.600907) + (xy 164.921147 60.49899) (xy 164.921147 60.498988) (xy 164.921149 60.498986) (xy 164.95185 60.384409) + (xy 164.95185 60.265791) (xy 164.922831 60.157491) (xy 173.91025 60.157491) (xy 173.91025 60.276109) + (xy 173.930323 60.351023) (xy 173.940952 60.39069) (xy 174.000257 60.493408) (xy 174.000259 60.49341) + (xy 174.000261 60.493413) (xy 174.084137 60.577289) (xy 174.084139 60.57729) (xy 174.084141 60.577292) + (xy 174.18686 60.636597) (xy 174.186861 60.636597) (xy 174.186864 60.636599) (xy 174.301441 60.6673) + (xy 174.301443 60.6673) (xy 174.420057 60.6673) (xy 174.420059 60.6673) (xy 174.534636 60.636599) + (xy 174.534638 60.636597) (xy 174.53464 60.636597) (xy 174.637358 60.577292) (xy 174.637358 60.577291) + (xy 174.637363 60.577289) (xy 174.721239 60.493413) (xy 174.780549 60.390686) (xy 174.81125 60.276109) + (xy 174.81125 60.157491) (xy 174.780549 60.042914) (xy 174.780547 60.042911) (xy 174.780547 60.042909) + (xy 174.721242 59.940191) (xy 174.72124 59.940189) (xy 174.721239 59.940187) (xy 174.637363 59.856311) + (xy 174.63736 59.856309) (xy 174.637358 59.856307) (xy 174.534639 59.797002) (xy 174.53464 59.797002) + (xy 174.521101 59.793374) (xy 174.420059 59.7663) (xy 174.301441 59.7663) (xy 174.231317 59.785089) + (xy 174.186859 59.797002) (xy 174.084141 59.856307) (xy 174.000257 59.940191) (xy 173.940952 60.042909) + (xy 173.932787 60.073381) (xy 173.91025 60.157491) (xy 164.922831 60.157491) (xy 164.921149 60.151214) + (xy 164.898934 60.112736) (xy 164.861842 60.048491) (xy 164.86184 60.048489) (xy 164.861839 60.048487) + (xy 164.777963 59.964611) (xy 164.77796 59.964609) (xy 164.777958 59.964607) (xy 164.675239 59.905302) + (xy 164.67524 59.905302) (xy 164.661701 59.901674) (xy 164.560659 59.8746) (xy 164.442041 59.8746) + (xy 164.371917 59.893389) (xy 164.327459 59.905302) (xy 164.224741 59.964607) (xy 164.22474 59.964608) + (xy 164.224737 59.96461) (xy 164.224737 59.964611) (xy 164.143742 60.045605) (xy 164.089228 60.073381) + (xy 164.073741 60.0746) (xy 161.813709 60.0746) (xy 161.813701 60.074599) (xy 161.802178 60.074599) + (xy 161.702523 60.074599) (xy 161.648589 60.096939) (xy 161.610453 60.112734) (xy 161.539985 60.183202) + (xy 161.539986 60.183203) (xy 161.539985 60.183204) (xy 160.874583 60.848605) (xy 160.820066 60.876382) + (xy 160.759634 60.866811) (xy 160.716369 60.823546) (xy 160.708954 60.804228) (xy 160.700349 60.772114) + (xy 160.700347 60.77211) (xy 160.641042 60.669391) (xy 160.64104 60.669389) (xy 160.641039 60.669387) + (xy 160.557163 60.585511) (xy 160.55716 60.585509) (xy 160.557158 60.585507) (xy 160.454439 60.526202) + (xy 160.45444 60.526202) (xy 160.440901 60.522574) (xy 160.339859 60.4955) (xy 160.225318 60.4955) + (xy 160.167127 60.476593) (xy 160.155314 60.466504) (xy 159.628997 59.940187) (xy 159.163913 59.475102) + (xy 159.136137 59.420587) (xy 159.145708 59.360155) (xy 159.188973 59.31689) (xy 159.233918 59.3061) + (xy 160.219026 59.3061) (xy 160.277217 59.325007) (xy 160.313181 59.374507) (xy 160.313181 59.435693) + (xy 160.304762 59.4546) (xy 160.273752 59.508309) (xy 160.273751 59.508314) (xy 160.24305 59.622891) + (xy 160.24305 59.741509) (xy 160.257923 59.797014) (xy 160.273752 59.85609) (xy 160.333057 59.958808) + (xy 160.333059 59.95881) (xy 160.333061 59.958813) (xy 160.416937 60.042689) (xy 160.416939 60.04269) + (xy 160.416941 60.042692) (xy 160.51966 60.101997) (xy 160.519661 60.101997) (xy 160.519664 60.101999) + (xy 160.634241 60.1327) (xy 160.634243 60.1327) (xy 160.752857 60.1327) (xy 160.752859 60.1327) + (xy 160.867436 60.101999) (xy 160.867438 60.101997) (xy 160.86744 60.101997) (xy 160.970158 60.042692) + (xy 160.970158 60.042691) (xy 160.970163 60.042689) (xy 161.054039 59.958813) (xy 161.084934 59.905302) + (xy 161.113347 59.85609) (xy 161.113347 59.856088) (xy 161.113349 59.856086) (xy 161.14405 59.741509) + (xy 161.14405 59.622891) (xy 161.113349 59.508314) (xy 161.113347 59.508311) (xy 161.113347 59.508309) + (xy 161.082338 59.4546) (xy 161.069616 59.394752) (xy 161.094503 59.338856) (xy 161.147491 59.308263) + (xy 161.168074 59.3061) (xy 188.534066 59.3061) (xy 188.592255 59.325006) (xy 188.681156 59.389596) + (xy 188.842511 59.471811) (xy 189.014741 59.527771) (xy 189.086286 59.539102) (xy 189.193601 59.5561) + (xy 189.193604 59.5561) (xy 189.374699 59.5561) (xy 189.464127 59.541935) (xy 189.553559 59.527771) + (xy 189.725789 59.471811) (xy 189.887144 59.389596) (xy 190.033651 59.283153) (xy 190.161703 59.155101) + (xy 190.268146 59.008594) (xy 190.350361 58.847239) (xy 190.406321 58.675009) (xy 190.43465 58.496146) + (xy 190.43465 58.315054) (xy 190.43465 58.31505) (xy 190.406321 58.136193) (xy 190.406321 58.136191) + (xy 190.350361 57.963961) (xy 190.268146 57.802606) (xy 190.161703 57.656099) (xy 190.033651 57.528047) + (xy 189.887144 57.421604) (xy 189.887143 57.421603) (xy 189.887141 57.421602) (xy 189.725787 57.339388) + (xy 189.553556 57.283428) (xy 189.374699 57.2551) (xy 189.374696 57.2551) (xy 189.193604 57.2551) + (xy 189.193601 57.2551) (xy 189.014743 57.283428) (xy 188.842512 57.339388) (xy 188.681158 57.421602) + (xy 188.658079 57.43837) (xy 188.592255 57.486193) (xy 188.534066 57.5051) (xy 157.948157 57.5051) + (xy 157.889966 57.486193) (xy 157.878153 57.476104) (xy 156.413755 56.011705) (xy 156.392295 55.979586) + (xy 156.343298 55.861297) (xy 156.338282 55.849186) (xy 156.228789 55.685318) (xy 156.089432 55.545961) + (xy 155.925564 55.436468) (xy 155.921032 55.434591) (xy 155.794527 55.382191) (xy 166.29125 55.382191) + (xy 166.29125 55.500809) (xy 166.307481 55.561382) (xy 166.321952 55.61539) (xy 166.381257 55.718108) + (xy 166.381259 55.71811) (xy 166.381261 55.718113) (xy 166.465137 55.801989) (xy 166.465139 55.80199) + (xy 166.465141 55.801992) (xy 166.56786 55.861297) (xy 166.567861 55.861297) (xy 166.567864 55.861299) + (xy 166.682441 55.892) (xy 166.682443 55.892) (xy 166.801057 55.892) (xy 166.801059 55.892) (xy 166.915636 55.861299) + (xy 166.915638 55.861297) (xy 166.91564 55.861297) (xy 167.018358 55.801992) (xy 167.018358 55.801991) + (xy 167.018363 55.801989) (xy 167.102239 55.718113) (xy 167.102242 55.718108) (xy 167.161547 55.61539) + (xy 167.161547 55.615388) (xy 167.161549 55.615386) (xy 167.19225 55.500809) (xy 167.19225 55.382191) + (xy 167.171109 55.303291) (xy 169.86245 55.303291) (xy 169.86245 55.421909) (xy 169.872196 55.45828) + (xy 169.893152 55.53649) (xy 169.952457 55.639208) (xy 169.952459 55.63921) (xy 169.952461 55.639213) + (xy 170.036337 55.723089) (xy 170.036339 55.72309) (xy 170.036341 55.723092) (xy 170.13906 55.782397) + (xy 170.139061 55.782397) (xy 170.139064 55.782399) (xy 170.253641 55.8131) (xy 170.253643 55.8131) + (xy 170.372257 55.8131) (xy 170.372259 55.8131) (xy 170.486836 55.782399) (xy 170.486838 55.782397) + (xy 170.48684 55.782397) (xy 170.589558 55.723092) (xy 170.589558 55.723091) (xy 170.589563 55.723089) + (xy 170.673439 55.639213) (xy 170.698278 55.596191) (xy 170.732747 55.53649) (xy 170.732747 55.536488) + (xy 170.732749 55.536486) (xy 170.76345 55.421909) (xy 170.76345 55.303291) (xy 170.732749 55.188714) + (xy 170.732747 55.188711) (xy 170.732747 55.188709) (xy 170.673442 55.085991) (xy 170.67344 55.085989) + (xy 170.673439 55.085987) (xy 170.589563 55.002111) (xy 170.58956 55.002109) (xy 170.589558 55.002107) + (xy 170.486839 54.942802) (xy 170.486841 54.942802) (xy 170.485075 54.942329) (xy 170.372259 54.9121) + (xy 170.253641 54.9121) (xy 170.183517 54.930889) (xy 170.139059 54.942802) (xy 170.036341 55.002107) + (xy 169.952457 55.085991) (xy 169.893152 55.188709) (xy 169.887519 55.209732) (xy 169.86245 55.303291) + (xy 167.171109 55.303291) (xy 167.161549 55.267614) (xy 167.161547 55.267611) (xy 167.161547 55.267609) + (xy 167.102242 55.164891) (xy 167.10224 55.164889) (xy 167.102239 55.164887) (xy 167.018363 55.081011) + (xy 167.01836 55.081009) (xy 167.018358 55.081007) (xy 166.915639 55.021702) (xy 166.91564 55.021702) + (xy 166.902101 55.018074) (xy 166.801059 54.991) (xy 166.682441 54.991) (xy 166.627196 55.005803) + (xy 166.567859 55.021702) (xy 166.465141 55.081007) (xy 166.381257 55.164891) (xy 166.321952 55.267609) + (xy 166.3058 55.327891) (xy 166.29125 55.382191) (xy 155.794527 55.382191) (xy 155.743485 55.361049) + (xy 155.550193 55.3226) (xy 155.550191 55.3226) (xy 155.353109 55.3226) (xy 155.353106 55.3226) + (xy 155.159815 55.361049) (xy 155.159813 55.361049) (xy 154.977736 55.436467) (xy 154.813868 55.545961) + (xy 154.813864 55.545964) (xy 154.674514 55.685314) (xy 154.674511 55.685318) (xy 154.565017 55.849186) + (xy 154.489599 56.031263) (xy 154.454486 56.207784) (xy 154.424589 56.261167) (xy 154.369023 56.286783) + (xy 154.309014 56.274846) (xy 154.267481 56.229916) (xy 154.259607 56.203956) (xy 154.228409 56.006978) + (xy 154.162745 55.804884) (xy 154.066273 55.615546) (xy 154.066269 55.61554) (xy 154.02692 55.561382) + (xy 154.026919 55.561382) (xy 153.394612 56.193689) (xy 153.377575 56.130107) (xy 153.311749 56.016093) + (xy 153.218657 55.923001) (xy 153.104643 55.857175) (xy 153.041057 55.840137) (xy 153.673366 55.207829) + (xy 153.673366 55.207828) (xy 153.619209 55.16848) (xy 153.619203 55.168476) (xy 153.429865 55.072004) + (xy 153.227771 55.00634) (xy 153.0179 54.9731) (xy 152.8054 54.9731) (xy 152.595528 55.00634) (xy 152.393434 55.072004) + (xy 152.204096 55.168476) (xy 152.204092 55.168478) (xy 152.149932 55.207828) (xy 152.782241 55.840137) + (xy 152.718657 55.857175) (xy 152.604643 55.923001) (xy 152.511551 56.016093) (xy 152.445725 56.130107) + (xy 152.428687 56.193691) (xy 151.796378 55.561382) (xy 151.757028 55.615542) (xy 151.757026 55.615546) + (xy 151.660554 55.804884) (xy 151.59489 56.006978) (xy 151.563692 56.203956) (xy 151.535914 56.258473) + (xy 151.481398 56.28625) (xy 151.420966 56.276679) (xy 151.377701 56.233414) (xy 151.368813 56.207783) + (xy 151.354337 56.135009) (xy 151.333701 56.031265) (xy 151.258282 55.849186) (xy 151.148789 55.685318) + (xy 151.009432 55.545961) (xy 150.880606 55.459882) (xy 150.845563 55.436467) (xy 150.663485 55.361049) + (xy 150.560212 55.340506) (xy 150.470193 55.3226) (xy 150.470191 55.3226) (xy 150.273109 55.3226) + (xy 150.273106 55.3226) (xy 150.079815 55.361049) (xy 150.079813 55.361049) (xy 149.897736 55.436467) + (xy 149.733868 55.545961) (xy 149.733864 55.545964) (xy 149.594514 55.685314) (xy 149.594511 55.685318) + (xy 149.485017 55.849186) (xy 149.409599 56.031263) (xy 149.409599 56.031265) (xy 149.37115 56.224556) + (xy 149.37115 56.421643) (xy 149.409599 56.614934) (xy 149.409599 56.614936) (xy 149.485017 56.797013) + (xy 149.512558 56.838231) (xy 149.594511 56.960882) (xy 149.733868 57.100239) (xy 149.897736 57.209732) + (xy 150.079815 57.285151) (xy 150.273109 57.3236) (xy 150.27311 57.3236) (xy 150.47019 57.3236) + (xy 150.470191 57.3236) (xy 150.663485 57.285151) (xy 150.845564 57.209732) (xy 151.009432 57.100239) + (xy 151.148789 56.960882) (xy 151.258282 56.797014) (xy 151.333701 56.614935) (xy 151.368813 56.438415) + (xy 151.39871 56.385032) (xy 151.454275 56.359416) (xy 151.514285 56.371353) (xy 151.555817 56.416283) + (xy 151.563692 56.442243) (xy 151.59489 56.639221) (xy 151.660554 56.841315) (xy 151.757026 57.030653) + (xy 151.75703 57.030659) (xy 151.796378 57.084816) (xy 151.796379 57.084816) (xy 152.428687 56.452507) + (xy 152.445725 56.516093) (xy 152.511551 56.630107) (xy 152.604643 56.723199) (xy 152.718657 56.789025) + (xy 152.782239 56.806062) (xy 152.149932 57.438369) (xy 152.149932 57.43837) (xy 152.20409 57.477719) + (xy 152.204096 57.477723) (xy 152.393434 57.574195) (xy 152.595528 57.639859) (xy 152.8054 57.6731) + (xy 153.0179 57.6731) (xy 153.227771 57.639859) (xy 153.429865 57.574195) (xy 153.619206 57.47772) + (xy 153.673366 57.43837) (xy 153.041058 56.806062) (xy 153.104643 56.789025) (xy 153.218657 56.723199) + (xy 153.311749 56.630107) (xy 153.377575 56.516093) (xy 153.394612 56.452508) (xy 154.02692 57.084816) + (xy 154.06627 57.030656) (xy 154.162745 56.841315) (xy 154.228409 56.639221) (xy 154.259607 56.442243) + (xy 154.287384 56.387727) (xy 154.341901 56.359949) (xy 154.402333 56.36952) (xy 154.445598 56.412785) + (xy 154.454486 56.438415) (xy 154.489599 56.614936) (xy 154.565017 56.797013) (xy 154.592558 56.838231) + (xy 154.674511 56.960882) (xy 154.813868 57.100239) (xy 154.960458 57.198187) (xy 154.977736 57.209732) + (xy 155.108136 57.263745) (xy 155.140255 57.285205) (xy 156.834686 58.979635) (xy 156.960115 59.105064) + (xy 157.030636 59.152185) (xy 157.068515 59.200235) (xy 157.070917 59.261373) (xy 157.036924 59.312247) + (xy 156.97952 59.333424) (xy 156.975634 59.3335) (xy 144.493619 59.3335) (xy 144.435428 59.314593) + (xy 144.423615 59.304504) (xy 142.611715 57.492604) (xy 142.583938 57.438087) (xy 142.593509 57.377655) + (xy 142.636774 57.33439) (xy 142.681719 57.3236) (xy 142.85019 57.3236) (xy 142.850191 57.3236) + (xy 143.043485 57.285151) (xy 143.225564 57.209732) (xy 143.389432 57.100239) (xy 143.528789 56.960882) + (xy 143.638282 56.797014) (xy 143.713701 56.614935) (xy 143.75215 56.421641) (xy 143.75215 56.224559) + (xy 143.752149 56.224556) (xy 144.29115 56.224556) (xy 144.29115 56.421643) (xy 144.329599 56.614934) + (xy 144.329599 56.614936) (xy 144.405017 56.797013) (xy 144.432558 56.838231) (xy 144.514511 56.960882) + (xy 144.653868 57.100239) (xy 144.817736 57.209732) (xy 144.999815 57.285151) (xy 145.193109 57.3236) + (xy 145.19311 57.3236) (xy 145.39019 57.3236) (xy 145.390191 57.3236) (xy 145.583485 57.285151) + (xy 145.765564 57.209732) (xy 145.929432 57.100239) (xy 146.068789 56.960882) (xy 146.178282 56.797014) + (xy 146.253701 56.614935) (xy 146.29215 56.421641) (xy 146.29215 56.224559) (xy 146.292149 56.224556) + (xy 146.83115 56.224556) (xy 146.83115 56.421643) (xy 146.869599 56.614934) (xy 146.869599 56.614936) + (xy 146.945017 56.797013) (xy 146.972558 56.838231) (xy 147.054511 56.960882) (xy 147.193868 57.100239) + (xy 147.357736 57.209732) (xy 147.539815 57.285151) (xy 147.733109 57.3236) (xy 147.73311 57.3236) + (xy 147.93019 57.3236) (xy 147.930191 57.3236) (xy 148.123485 57.285151) (xy 148.305564 57.209732) + (xy 148.469432 57.100239) (xy 148.608789 56.960882) (xy 148.718282 56.797014) (xy 148.793701 56.614935) + (xy 148.83215 56.421641) (xy 148.83215 56.224559) (xy 148.793701 56.031265) (xy 148.718282 55.849186) + (xy 148.608789 55.685318) (xy 148.469432 55.545961) (xy 148.340606 55.459882) (xy 148.305563 55.436467) + (xy 148.123485 55.361049) (xy 147.930193 55.3226) (xy 147.930191 55.3226) (xy 147.733109 55.3226) + (xy 147.733106 55.3226) (xy 147.539815 55.361049) (xy 147.539813 55.361049) (xy 147.357736 55.436467) + (xy 147.193868 55.545961) (xy 147.193864 55.545964) (xy 147.054514 55.685314) (xy 147.054511 55.685318) + (xy 146.945017 55.849186) (xy 146.869599 56.031263) (xy 146.869599 56.031265) (xy 146.83115 56.224556) + (xy 146.292149 56.224556) (xy 146.253701 56.031265) (xy 146.178282 55.849186) (xy 146.068789 55.685318) + (xy 145.929432 55.545961) (xy 145.800606 55.459882) (xy 145.765563 55.436467) (xy 145.583485 55.361049) + (xy 145.390193 55.3226) (xy 145.390191 55.3226) (xy 145.193109 55.3226) (xy 145.193106 55.3226) + (xy 144.999815 55.361049) (xy 144.999813 55.361049) (xy 144.817736 55.436467) (xy 144.653868 55.545961) + (xy 144.653864 55.545964) (xy 144.514514 55.685314) (xy 144.514511 55.685318) (xy 144.405017 55.849186) + (xy 144.329599 56.031263) (xy 144.329599 56.031265) (xy 144.29115 56.224556) (xy 143.752149 56.224556) + (xy 143.713701 56.031265) (xy 143.638282 55.849186) (xy 143.528789 55.685318) (xy 143.389432 55.545961) + (xy 143.260606 55.459882) (xy 143.225563 55.436467) (xy 143.043485 55.361049) (xy 142.850193 55.3226) + (xy 142.850191 55.3226) (xy 142.653109 55.3226) (xy 142.653106 55.3226) (xy 142.459815 55.361049) + (xy 142.459813 55.361049) (xy 142.277736 55.436467) (xy 142.113868 55.545961) (xy 142.113864 55.545964) + (xy 141.974514 55.685314) (xy 141.974511 55.685318) (xy 141.8702 55.84143) (xy 141.82215 55.879309) + (xy 141.761012 55.881711) (xy 141.710138 55.847718) (xy 141.69642 55.824312) (xy 141.695918 55.8231) + (xy 141.694014 55.818503) (xy 141.666609 55.791098) (xy 141.623547 55.748035) (xy 141.623547 55.748036) + (xy 140.726283 54.850772) (xy 188.13365 54.850772) (xy 188.13365 56.880427) (xy 188.142382 56.92432) + (xy 188.142384 56.924324) (xy 188.166811 56.960882) (xy 188.175646 56.974104) (xy 188.225428 57.007367) + (xy 188.236477 57.009564) (xy 188.269322 57.016099) (xy 188.269328 57.016099) (xy 188.26933 57.0161) + (xy 188.269331 57.0161) (xy 190.298969 57.0161) (xy 190.29897 57.0161) (xy 190.298971 57.016099) + (xy 190.298977 57.016099) (xy 190.320773 57.011762) (xy 190.342872 57.007367) (xy 190.392654 56.974104) + (xy 190.425917 56.924322) (xy 190.433613 56.885635) (xy 190.434649 56.880427) (xy 190.43465 56.880418) + (xy 190.43465 54.850781) (xy 190.434649 54.850772) (xy 190.425917 54.806879) (xy 190.425915 54.806875) + (xy 190.392655 54.757098) (xy 190.392654 54.757096) (xy 190.372198 54.743428) (xy 190.342874 54.723834) + (xy 190.34287 54.723832) (xy 190.298977 54.7151) (xy 190.29897 54.7151) (xy 188.26933 54.7151) (xy 188.269322 54.7151) + (xy 188.225429 54.723832) (xy 188.225425 54.723834) (xy 188.175648 54.757094) (xy 188.175644 54.757098) + (xy 188.142384 54.806875) (xy 188.142382 54.806879) (xy 188.13365 54.850772) (xy 140.726283 54.850772) + (xy 139.162502 53.286991) (xy 172.95615 53.286991) (xy 172.95615 53.405609) (xy 172.964419 53.436468) + (xy 172.986852 53.52019) (xy 173.046157 53.622908) (xy 173.046159 53.62291) (xy 173.046161 53.622913) + (xy 173.130037 53.706789) (xy 173.130039 53.70679) (xy 173.130041 53.706792) (xy 173.23276 53.766097) + (xy 173.232761 53.766097) (xy 173.232764 53.766099) (xy 173.347341 53.7968) (xy 173.347343 53.7968) + (xy 173.465957 53.7968) (xy 173.465959 53.7968) (xy 173.580536 53.766099) (xy 173.580538 53.766097) + (xy 173.58054 53.766097) (xy 173.683258 53.706792) (xy 173.683258 53.706791) (xy 173.683263 53.706789) + (xy 173.767139 53.622913) (xy 173.826449 53.520186) (xy 173.85715 53.405609) (xy 173.85715 53.286991) + (xy 173.826449 53.172414) (xy 173.826447 53.172411) (xy 173.826447 53.172409) (xy 173.767142 53.069691) + (xy 173.76714 53.069689) (xy 173.767139 53.069687) (xy 173.683263 52.985811) (xy 173.68326 52.985809) + (xy 173.683258 52.985807) (xy 173.580539 52.926502) (xy 173.58054 52.926502) (xy 173.567001 52.922874) + (xy 173.465959 52.8958) (xy 173.347341 52.8958) (xy 173.301303 52.908136) (xy 173.232759 52.926502) + (xy 173.130041 52.985807) (xy 173.046157 53.069691) (xy 172.986852 53.172409) (xy 172.986851 53.172414) + (xy 172.95615 53.286991) (xy 139.162502 53.286991) (xy 138.783647 52.908136) (xy 138.783645 52.908135) + (xy 138.783644 52.908134) (xy 138.691579 52.87) (xy 138.691578 52.87) (xy 126.353619 52.87) (xy 126.295428 52.851093) + (xy 126.283615 52.841004) (xy 124.933802 51.491191) (xy 151.76645 51.491191) (xy 151.76645 51.609809) + (xy 151.793325 51.710107) (xy 151.797152 51.72439) (xy 151.856457 51.827108) (xy 151.856459 51.82711) + (xy 151.856461 51.827113) (xy 151.940337 51.910989) (xy 151.940339 51.91099) (xy 151.940341 51.910992) + (xy 152.04306 51.970297) (xy 152.043061 51.970297) (xy 152.043064 51.970299) (xy 152.157641 52.001) + (xy 152.157643 52.001) (xy 152.276257 52.001) (xy 152.276259 52.001) (xy 152.390836 51.970299) (xy 152.390838 51.970297) + (xy 152.39084 51.970297) (xy 152.493558 51.910992) (xy 152.493558 51.910991) (xy 152.493563 51.910989) + (xy 152.577439 51.827113) (xy 152.60869 51.772986) (xy 152.636747 51.72439) (xy 152.636747 51.724388) + (xy 152.636749 51.724386) (xy 152.66745 51.609809) (xy 152.66745 51.539791) (xy 183.19425 51.539791) + (xy 183.19425 51.658409) (xy 183.208103 51.710107) (xy 183.224952 51.77299) (xy 183.284257 51.875708) + (xy 183.284259 51.87571) (xy 183.284261 51.875713) (xy 183.368137 51.959589) (xy 183.368139 51.95959) + (xy 183.368141 51.959592) (xy 183.47086 52.018897) (xy 183.470861 52.018897) (xy 183.470864 52.018899) + (xy 183.585441 52.0496) (xy 183.585443 52.0496) (xy 183.704057 52.0496) (xy 183.704059 52.0496) + (xy 183.818636 52.018899) (xy 183.818638 52.018897) (xy 183.81864 52.018897) (xy 183.921358 51.959592) + (xy 183.921358 51.959591) (xy 183.921363 51.959589) (xy 184.005239 51.875713) (xy 184.0091 51.869025) + (xy 184.064547 51.77299) (xy 184.064547 51.772988) (xy 184.064549 51.772986) (xy 184.09525 51.658409) + (xy 184.09525 51.539791) (xy 184.064549 51.425214) (xy 184.064547 51.425211) (xy 184.064547 51.425209) + (xy 184.005242 51.322491) (xy 184.00524 51.322489) (xy 184.005239 51.322487) (xy 183.921363 51.238611) + (xy 183.92136 51.238609) (xy 183.921358 51.238607) (xy 183.818639 51.179302) (xy 183.81864 51.179302) + (xy 183.805101 51.175674) (xy 183.704059 51.1486) (xy 183.585441 51.1486) (xy 183.515317 51.167389) + (xy 183.470859 51.179302) (xy 183.368141 51.238607) (xy 183.284257 51.322491) (xy 183.224952 51.425209) + (xy 183.224951 51.425214) (xy 183.19425 51.539791) (xy 152.66745 51.539791) (xy 152.66745 51.491191) + (xy 152.636749 51.376614) (xy 152.636747 51.376611) (xy 152.636747 51.376609) (xy 152.577442 51.273891) + (xy 152.57744 51.273889) (xy 152.577439 51.273887) (xy 152.493563 51.190011) (xy 152.49356 51.190009) + (xy 152.493558 51.190007) (xy 152.390839 51.130702) (xy 152.39084 51.130702) (xy 152.377301 51.127074) + (xy 152.276259 51.1) (xy 152.157641 51.1) (xy 152.087517 51.118789) (xy 152.043059 51.130702) (xy 151.940341 51.190007) + (xy 151.856457 51.273891) (xy 151.797152 51.376609) (xy 151.797151 51.376614) (xy 151.76645 51.491191) + (xy 124.933802 51.491191) (xy 124.380702 50.938091) (xy 189.11225 50.938091) (xy 189.11225 51.056709) + (xy 189.136872 51.1486) (xy 189.142952 51.17129) (xy 189.202257 51.274008) (xy 189.202259 51.27401) + (xy 189.202261 51.274013) (xy 189.286137 51.357889) (xy 189.286139 51.35789) (xy 189.286141 51.357892) + (xy 189.38886 51.417197) (xy 189.388861 51.417197) (xy 189.388864 51.417199) (xy 189.503441 51.4479) + (xy 189.503443 51.4479) (xy 189.622057 51.4479) (xy 189.622059 51.4479) (xy 189.736636 51.417199) + (xy 189.736638 51.417197) (xy 189.73664 51.417197) (xy 189.839358 51.357892) (xy 189.839358 51.357891) + (xy 189.839363 51.357889) (xy 189.923239 51.274013) (xy 189.923242 51.274008) (xy 189.982547 51.17129) + (xy 189.982547 51.171288) (xy 189.982549 51.171286) (xy 190.01325 51.056709) (xy 190.01325 50.938091) + (xy 189.982549 50.823514) (xy 189.982547 50.823511) (xy 189.982547 50.823509) (xy 189.923242 50.720791) + (xy 189.92324 50.720789) (xy 189.923239 50.720787) (xy 189.839363 50.636911) (xy 189.83936 50.636909) + (xy 189.839358 50.636907) (xy 189.736639 50.577602) (xy 189.73664 50.577602) (xy 189.723101 50.573974) + (xy 189.622059 50.5469) (xy 189.503441 50.5469) (xy 189.433317 50.565689) (xy 189.388859 50.577602) + (xy 189.286141 50.636907) (xy 189.202257 50.720791) (xy 189.142952 50.823509) (xy 189.142951 50.823514) + (xy 189.11225 50.938091) (xy 124.380702 50.938091) (xy 123.176002 49.733391) (xy 172.92165 49.733391) + (xy 172.92165 49.852009) (xy 172.933038 49.894509) (xy 172.952352 49.96659) (xy 173.011657 50.069308) + (xy 173.011659 50.06931) (xy 173.011661 50.069313) (xy 173.095537 50.153189) (xy 173.095539 50.15319) + (xy 173.095541 50.153192) (xy 173.19826 50.212497) (xy 173.198261 50.212497) (xy 173.198264 50.212499) + (xy 173.312841 50.2432) (xy 173.312843 50.2432) (xy 173.431457 50.2432) (xy 173.431459 50.2432) + (xy 173.546036 50.212499) (xy 173.546038 50.212497) (xy 173.54604 50.212497) (xy 173.648758 50.153192) + (xy 173.648758 50.153191) (xy 173.648763 50.153189) (xy 173.732639 50.069313) (xy 173.740821 50.055142) + (xy 173.791947 49.96659) (xy 173.791947 49.966588) (xy 173.791949 49.966586) (xy 173.82265 49.852009) + (xy 173.82265 49.775891) (xy 179.15285 49.775891) (xy 179.15285 49.894509) (xy 179.169687 49.957344) + (xy 179.183552 50.00909) (xy 179.242857 50.111808) (xy 179.242859 50.11181) (xy 179.242861 50.111813) + (xy 179.326737 50.195689) (xy 179.326739 50.19569) (xy 179.326741 50.195692) (xy 179.42946 50.254997) + (xy 179.429461 50.254997) (xy 179.429464 50.254999) (xy 179.544041 50.2857) (xy 179.544043 50.2857) + (xy 179.662657 50.2857) (xy 179.662659 50.2857) (xy 179.777236 50.254999) (xy 179.777238 50.254997) + (xy 179.77724 50.254997) (xy 179.879958 50.195692) (xy 179.879958 50.195691) (xy 179.879963 50.195689) + (xy 179.963839 50.111813) (xy 179.988377 50.069313) (xy 180.023147 50.00909) (xy 180.023147 50.009088) + (xy 180.023149 50.009086) (xy 180.028844 49.987831) (xy 189.88035 49.987831) (xy 189.88035 49.987931) + (xy 189.88035 50.116069) (xy 189.899531 50.212497) (xy 189.905349 50.241742) (xy 189.90535 50.241747) + (xy 189.954384 50.360125) (xy 189.954388 50.360133) (xy 189.997215 50.424226) (xy 190.025574 50.466669) + (xy 190.116181 50.557276) (xy 190.179698 50.599717) (xy 190.222716 50.628461) (xy 190.22272 50.628463) + (xy 190.222723 50.628465) (xy 190.341106 50.677501) (xy 190.466781 50.7025) (xy 198.110096 50.7025) + (xy 198.168287 50.721407) (xy 198.1801 50.731496) (xy 209.037154 61.58855) (xy 209.064931 61.643067) + (xy 209.06615 61.658554) (xy 209.06615 62.454621) (xy 209.066151 62.454623) (xy 209.081002 62.548399) + (xy 209.081004 62.548404) (xy 209.1386 62.661442) (xy 209.228308 62.75115) (xy 209.341346 62.808746) + (xy 209.435131 62.8236) (xy 210.948168 62.823599) (xy 210.948171 62.823599) (xy 210.948172 62.823598) + (xy 210.995061 62.816172) (xy 211.041949 62.808747) (xy 211.041949 62.808746) (xy 211.041954 62.808746) + (xy 211.154992 62.75115) (xy 211.2447 62.661442) (xy 211.302296 62.548404) (xy 211.31715 62.454619) + (xy 211.317149 61.191582) (xy 211.317149 61.191578) (xy 211.317148 61.191576) (xy 211.302297 61.0978) + (xy 211.302296 61.097798) (xy 211.302296 61.097796) (xy 211.2447 60.984758) (xy 211.154992 60.89505) + (xy 211.041954 60.837454) (xy 211.041955 60.837454) (xy 210.948172 60.8226) (xy 210.948169 60.8226) + (xy 210.152104 60.8226) (xy 210.093913 60.803693) (xy 210.0821 60.793604) (xy 209.754468 60.465972) + (xy 209.726691 60.411455) (xy 209.736262 60.351023) (xy 209.779527 60.307758) (xy 209.839959 60.298187) + (xy 209.84376 60.298865) (xy 209.968109 60.3236) (xy 209.96811 60.3236) (xy 210.41519 60.3236) (xy 210.415191 60.3236) + (xy 210.608485 60.285151) (xy 210.790564 60.209732) (xy 210.954432 60.100239) (xy 211.093789 59.960882) + (xy 211.203282 59.797014) (xy 211.278701 59.614935) (xy 211.31715 59.421641) (xy 211.31715 59.224559) + (xy 211.278701 59.031265) (xy 211.203282 58.849186) (xy 211.093789 58.685318) (xy 210.954432 58.545961) + (xy 210.790564 58.436468) (xy 210.790565 58.436468) (xy 210.790563 58.436467) (xy 210.608486 58.361049) + (xy 210.543915 58.348205) (xy 210.490531 58.318308) (xy 210.464916 58.262742) (xy 210.476853 58.202733) + (xy 210.521783 58.1612) (xy 210.547743 58.153326) (xy 210.632771 58.139859) (xy 210.834865 58.074195) + (xy 211.024202 57.977724) (xy 211.196114 57.852822) (xy 211.346372 57.702564) (xy 211.471274 57.530652) + (xy 211.567745 57.341315) (xy 211.633408 57.139222) (xy 211.643881 57.0731) (xy 210.595796 57.0731) + (xy 210.63428 57.006443) (xy 210.66665 56.885635) (xy 210.66665 56.760565) (xy 210.63428 56.639757) + (xy 210.595796 56.5731) (xy 211.643881 56.5731) (xy 211.643881 56.573099) (xy 211.633408 56.506977) + (xy 211.567745 56.304884) (xy 211.471274 56.115547) (xy 211.346372 55.943635) (xy 211.196114 55.793377) + (xy 211.024202 55.668475) (xy 210.834865 55.572004) (xy 210.632772 55.506341) (xy 210.547742 55.492873) + (xy 210.493226 55.465095) (xy 210.465449 55.410578) (xy 210.475021 55.350146) (xy 210.518286 55.306882) + (xy 210.543913 55.297995) (xy 210.608485 55.285151) (xy 210.790564 55.209732) (xy 210.954432 55.100239) + (xy 211.093789 54.960882) (xy 211.203282 54.797014) (xy 211.278701 54.614935) (xy 211.31715 54.421641) + (xy 211.31715 54.224559) (xy 211.278701 54.031265) (xy 211.203282 53.849186) (xy 211.093789 53.685318) + (xy 210.954432 53.545961) (xy 210.790564 53.436468) (xy 210.790565 53.436468) (xy 210.790563 53.436467) + (xy 210.608485 53.361049) (xy 210.415193 53.3226) (xy 210.415191 53.3226) (xy 209.968109 53.3226) + (xy 209.968106 53.3226) (xy 209.774815 53.361049) (xy 209.774813 53.361049) (xy 209.592736 53.436467) + (xy 209.428868 53.545961) (xy 209.428864 53.545964) (xy 209.289514 53.685314) (xy 209.289511 53.685318) + (xy 209.180017 53.849186) (xy 209.104599 54.031263) (xy 209.104599 54.031265) (xy 209.06615 54.224556) + (xy 209.06615 54.224559) (xy 209.06615 54.421641) (xy 209.101847 54.601102) (xy 209.104599 54.614934) + (xy 209.104599 54.614936) (xy 209.180017 54.797013) (xy 209.215938 54.850772) (xy 209.289511 54.960882) + (xy 209.428868 55.100239) (xy 209.592736 55.209732) (xy 209.774815 55.285151) (xy 209.839384 55.297994) + (xy 209.892767 55.327891) (xy 209.918383 55.383456) (xy 209.906446 55.443465) (xy 209.861517 55.484998) + (xy 209.835557 55.492873) (xy 209.750527 55.506341) (xy 209.548434 55.572004) (xy 209.359097 55.668475) + (xy 209.187185 55.793377) (xy 209.036927 55.943635) (xy 208.912025 56.115547) (xy 208.815554 56.304884) + (xy 208.749891 56.506977) (xy 208.739418 56.573099) (xy 208.739419 56.5731) (xy 209.787504 56.5731) + (xy 209.74902 56.639757) (xy 209.71665 56.760565) (xy 209.71665 56.885635) (xy 209.74902 57.006443) + (xy 209.787504 57.0731) (xy 208.739419 57.0731) (xy 208.749891 57.139222) (xy 208.815554 57.341315) + (xy 208.912025 57.530652) (xy 209.036927 57.702564) (xy 209.187185 57.852822) (xy 209.359097 57.977724) + (xy 209.548434 58.074195) (xy 209.750528 58.139859) (xy 209.835556 58.153326) (xy 209.890072 58.181103) + (xy 209.91785 58.23562) (xy 209.908279 58.296052) (xy 209.865014 58.339317) (xy 209.839384 58.348205) + (xy 209.774813 58.361049) (xy 209.592736 58.436467) (xy 209.428868 58.545961) (xy 209.428864 58.545964) + (xy 209.289514 58.685314) (xy 209.289511 58.685318) (xy 209.180017 58.849186) (xy 209.104599 59.031263) + (xy 209.104599 59.031265) (xy 209.06615 59.224556) (xy 209.06615 59.421643) (xy 209.090879 59.545963) + (xy 209.083687 59.606724) (xy 209.042155 59.651654) (xy 208.982145 59.663591) (xy 208.92658 59.637975) + (xy 208.923777 59.635281) (xy 205.96119 56.672694) (xy 202.460905 53.172409) (xy 198.835219 49.546723) + (xy 198.835215 49.54672) (xy 198.728676 49.475534) (xy 198.610289 49.426497) (xy 198.609789 49.426398) + (xy 198.609782 49.426397) (xy 198.484619 49.4015) (xy 196.294571 49.4015) (xy 196.23638 49.382593) + (xy 196.200416 49.333093) (xy 196.200416 49.271907) (xy 196.23638 49.222407) (xy 196.245071 49.216764) + (xy 196.294558 49.188192) (xy 196.294558 49.188191) (xy 196.294563 49.188189) (xy 196.378439 49.104313) + (xy 196.437749 49.001586) (xy 196.46845 48.887009) (xy 196.46845 48.768391) (xy 196.437749 48.653814) + (xy 196.437747 48.653811) (xy 196.437747 48.653809) (xy 196.378442 48.551091) (xy 196.37844 48.551089) + (xy 196.378439 48.551087) (xy 196.294563 48.467211) (xy 196.29456 48.467209) (xy 196.294558 48.467207) + (xy 196.235641 48.433191) (xy 199.55675 48.433191) (xy 199.55675 48.551809) (xy 199.583824 48.652851) + (xy 199.587452 48.66639) (xy 199.646757 48.769108) (xy 199.646759 48.76911) (xy 199.646761 48.769113) + (xy 199.730637 48.852989) (xy 199.730639 48.85299) (xy 199.730641 48.852992) (xy 199.83336 48.912297) + (xy 199.833361 48.912297) (xy 199.833364 48.912299) (xy 199.947941 48.943) (xy 199.947943 48.943) + (xy 200.066557 48.943) (xy 200.066559 48.943) (xy 200.181136 48.912299) (xy 200.181138 48.912297) + (xy 200.18114 48.912297) (xy 200.283858 48.852992) (xy 200.283858 48.852991) (xy 200.283863 48.852989) + (xy 200.367739 48.769113) (xy 200.427049 48.666386) (xy 200.45775 48.551809) (xy 200.45775 48.433191) + (xy 200.427049 48.318614) (xy 200.427047 48.318611) (xy 200.427047 48.318609) (xy 200.367742 48.215891) + (xy 200.36774 48.215889) (xy 200.367739 48.215887) (xy 200.283863 48.132011) (xy 200.28386 48.132009) + (xy 200.283858 48.132007) (xy 200.181139 48.072702) (xy 200.18114 48.072702) (xy 200.167601 48.069074) + (xy 200.066559 48.042) (xy 199.947941 48.042) (xy 199.877817 48.060789) (xy 199.833359 48.072702) + (xy 199.730641 48.132007) (xy 199.646757 48.215891) (xy 199.587452 48.318609) (xy 199.573949 48.369004) + (xy 199.55675 48.433191) (xy 196.235641 48.433191) (xy 196.191839 48.407902) (xy 196.19184 48.407902) + (xy 196.178301 48.404274) (xy 196.077259 48.3772) (xy 195.958641 48.3772) (xy 195.888517 48.395989) + (xy 195.844059 48.407902) (xy 195.741341 48.467207) (xy 195.657457 48.551091) (xy 195.598152 48.653809) + (xy 195.594782 48.666386) (xy 195.56745 48.768391) (xy 195.56745 48.887009) (xy 195.582453 48.943) + (xy 195.598152 49.00159) (xy 195.657457 49.104308) (xy 195.657459 49.10431) (xy 195.657461 49.104313) + (xy 195.741337 49.188189) (xy 195.741339 49.18819) (xy 195.741341 49.188192) (xy 195.790829 49.216764) + (xy 195.83177 49.262233) (xy 195.838166 49.323083) (xy 195.807573 49.376071) (xy 195.751677 49.400958) + (xy 195.741329 49.4015) (xy 190.600796 49.4015) (xy 190.598759 49.4014) (xy 190.594919 49.4014) + (xy 190.466781 49.4014) (xy 190.46678 49.4014) (xy 190.403943 49.413899) (xy 190.341106 49.426399) + (xy 190.341105 49.426399) (xy 190.341102 49.4264) (xy 190.222724 49.475434) (xy 190.222716 49.475438) + (xy 190.116181 49.546624) (xy 190.116177 49.546627) (xy 190.025577 49.637227) (xy 190.025574 49.637231) + (xy 189.954388 49.743766) (xy 189.954384 49.743774) (xy 189.90535 49.862152) (xy 189.905349 49.862155) + (xy 189.905349 49.862156) (xy 189.88035 49.987831) (xy 180.028844 49.987831) (xy 180.05385 49.894509) + (xy 180.05385 49.775891) (xy 180.023149 49.661314) (xy 180.023147 49.661311) (xy 180.023147 49.661309) + (xy 179.963842 49.558591) (xy 179.96384 49.558589) (xy 179.963839 49.558587) (xy 179.879963 49.474711) + (xy 179.87996 49.474709) (xy 179.879958 49.474707) (xy 179.777239 49.415402) (xy 179.77724 49.415402) + (xy 179.763701 49.411774) (xy 179.662659 49.3847) (xy 179.544041 49.3847) (xy 179.483366 49.400958) + (xy 179.429459 49.415402) (xy 179.326741 49.474707) (xy 179.242857 49.558591) (xy 179.183552 49.661309) + (xy 179.183551 49.661314) (xy 179.15285 49.775891) (xy 173.82265 49.775891) (xy 173.82265 49.733391) + (xy 173.791949 49.618814) (xy 173.791947 49.618811) (xy 173.791947 49.618809) (xy 173.732642 49.516091) + (xy 173.73264 49.516089) (xy 173.732639 49.516087) (xy 173.648763 49.432211) (xy 173.64876 49.432209) + (xy 173.648758 49.432207) (xy 173.546039 49.372902) (xy 173.54604 49.372902) (xy 173.532501 49.369274) + (xy 173.431459 49.3422) (xy 173.312841 49.3422) (xy 173.242717 49.360989) (xy 173.198259 49.372902) + (xy 173.095541 49.432207) (xy 173.011657 49.516091) (xy 172.952352 49.618809) (xy 172.952351 49.618814) + (xy 172.92165 49.733391) (xy 123.176002 49.733391) (xy 121.38592 47.943309) (xy 121.358143 47.888792) + (xy 121.367714 47.82836) (xy 121.410979 47.785095) (xy 121.440437 47.775524) (xy 121.507771 47.764859) + (xy 121.709865 47.699195) (xy 121.899202 47.602724) (xy 122.071114 47.477822) (xy 122.221372 47.327564) + (xy 122.346274 47.155652) (xy 122.442745 46.966315) (xy 122.508409 46.764221) (xy 122.53868 46.5731) + (xy 121.595796 46.5731) (xy 121.63428 46.506443) (xy 121.66665 46.385635) (xy 121.66665 46.260565) + (xy 121.63428 46.139757) (xy 121.595796 46.0731) (xy 122.53868 46.0731) (xy 122.53868 46.073099) + (xy 122.508409 45.881978) (xy 122.442745 45.679884) (xy 122.346274 45.490547) (xy 122.221372 45.318635) + (xy 122.071114 45.168377) (xy 121.899202 45.043475) (xy 121.709865 44.947004) (xy 121.50777 44.88134) + (xy 121.44165 44.870867) (xy 121.44165 45.918954) (xy 121.374993 45.88047) (xy 121.254185 45.8481) + (xy 121.129115 45.8481) (xy 121.008307 45.88047) (xy 120.94165 45.918954) (xy 120.94165 44.870868) + (xy 120.941649 44.870867) (xy 120.87553 44.88134) (xy 120.875528 44.88134) (xy 120.673434 44.947004) + (xy 120.484097 45.043475) (xy 120.312185 45.168377) (xy 120.161927 45.318635) (xy 120.037025 45.490547) + (xy 119.940554 45.679884) (xy 119.874891 45.881977) (xy 119.861423 45.967008) (xy 119.833645 46.021524) + (xy 119.779128 46.049301) (xy 119.718696 46.039729) (xy 119.675432 45.996464) (xy 119.666544 45.970835) + (xy 119.653701 45.906265) (xy 119.578282 45.724186) (xy 119.468789 45.560318) (xy 119.329432 45.420961) + (xy 119.219938 45.347799) (xy 119.165563 45.311467) (xy 118.983485 45.236049) (xy 118.790193 45.1976) + (xy 118.790191 45.1976) (xy 118.593109 45.1976) (xy 118.593106 45.1976) (xy 118.399815 45.236049) + (xy 118.399813 45.236049) (xy 118.217736 45.311467) (xy 118.053868 45.420961) (xy 118.053864 45.420964) + (xy 117.914514 45.560314) (xy 117.914511 45.560318) (xy 117.805017 45.724186) (xy 117.729599 45.906263) + (xy 117.729599 45.906265) (xy 117.69115 46.099556) (xy 117.69115 46.546643) (xy 117.711657 46.649735) + (xy 117.726011 46.721899) (xy 117.729599 46.739934) (xy 117.729599 46.739936) (xy 117.805017 46.922013) + (xy 117.805018 46.922014) (xy 117.914511 47.085882) (xy 118.053868 47.225239) (xy 118.217736 47.334732) + (xy 118.399815 47.410151) (xy 118.593109 47.4486) (xy 118.59311 47.4486) (xy 118.79019 47.4486) + (xy 118.790191 47.4486) (xy 118.983485 47.410151) (xy 119.165564 47.334732) (xy 119.329432 47.225239) + (xy 119.468789 47.085882) (xy 119.542435 46.975662) (xy 119.590482 46.937785) (xy 119.65162 46.935383) + (xy 119.694749 46.96066) (xy 126.066953 53.332864) (xy 126.066954 53.332864) (xy 126.066955 53.332865) + (xy 126.159021 53.371) (xy 126.159022 53.371) (xy 126.258677 53.371) (xy 138.496981 53.371) (xy 138.555172 53.389907) + (xy 138.566985 53.399996) (xy 140.320585 55.153596) (xy 140.348362 55.208113) (xy 140.338791 55.268545) + (xy 140.295526 55.31181) (xy 140.250581 55.3226) (xy 140.113106 55.3226) (xy 139.919815 55.361049) + (xy 139.919813 55.361049) (xy 139.757515 55.428275) (xy 139.696518 55.433076) (xy 139.649626 55.406815) + (xy 139.215911 54.9731) (xy 138.773447 54.530636) (xy 138.773445 54.530635) (xy 138.773444 54.530634) + (xy 138.681379 54.4925) (xy 138.681378 54.4925) (xy 122.370509 54.4925) (xy 122.370501 54.492499) + (xy 122.358978 54.492499) (xy 122.259323 54.492499) (xy 122.205389 54.514839) (xy 122.167253 54.530634) + (xy 122.096785 54.601102) (xy 122.096786 54.601103) (xy 122.096785 54.601104) (xy 120.901453 55.796435) + (xy 120.901453 55.796436) (xy 120.901449 55.796439) (xy 120.891784 55.806103) (xy 120.837266 55.833878) + (xy 120.776834 55.824303) (xy 120.739469 55.791098) (xy 120.719408 55.761075) (xy 120.668789 55.685318) + (xy 120.529432 55.545961) (xy 120.400606 55.459882) (xy 120.365563 55.436467) (xy 120.183485 55.361049) + (xy 119.990193 55.3226) (xy 119.990191 55.3226) (xy 119.793109 55.3226) (xy 119.793106 55.3226) + (xy 119.599815 55.361049) (xy 119.599813 55.361049) (xy 119.417736 55.436467) (xy 119.253868 55.545961) + (xy 119.253864 55.545964) (xy 119.114514 55.685314) (xy 119.114511 55.685318) (xy 119.005017 55.849186) + (xy 118.929599 56.031263) (xy 118.929599 56.031265) (xy 118.89115 56.224556) (xy 118.89115 56.421643) + (xy 118.929599 56.614934) (xy 118.929599 56.614936) (xy 118.996824 56.777234) (xy 119.001624 56.838231) + (xy 118.975364 56.885123) (xy 108.439085 67.421404) (xy 108.384568 67.449181) (xy 108.369081 67.4504) + (xy 92.626159 67.4504) (xy 92.567968 67.431493) (xy 92.556161 67.421409) (xy 92.475163 67.340411) + (xy 92.47516 67.340409) (xy 92.475158 67.340407) (xy 92.372439 67.281102) (xy 92.37244 67.281102) + (xy 92.358901 67.277474) (xy 92.257859 67.2504) (xy 92.139241 67.2504) (xy 92.069117 67.269189) + (xy 92.024659 67.281102) (xy 91.921941 67.340407) (xy 91.838059 67.424289) (xy 91.776886 67.530243) + (xy 91.731416 67.571183) (xy 91.670566 67.577578) (xy 91.617578 67.546985) (xy 91.592692 67.49109) + (xy 91.59215 67.480742) (xy 91.59215 65.867868) (xy 91.611057 65.809677) (xy 91.62114 65.79787) + (xy 93.854014 63.564997) (xy 93.89215 63.472928) (xy 93.89215 63.373272) (xy 93.89215 55.458272) + (xy 106.19115 55.458272) (xy 106.19115 57.187927) (xy 106.199882 57.23182) (xy 106.199884 57.231824) + (xy 106.209269 57.245869) (xy 106.233146 57.281604) (xy 106.282928 57.314867) (xy 106.293977 57.317064) + (xy 106.326822 57.323599) (xy 106.326828 57.323599) (xy 106.32683 57.3236) (xy 106.326831 57.3236) + (xy 108.056469 57.3236) (xy 108.05647 57.3236) (xy 108.056471 57.323599) (xy 108.056477 57.323599) + (xy 108.078273 57.319262) (xy 108.100372 57.314867) (xy 108.150154 57.281604) (xy 108.183417 57.231822) + (xy 108.187812 57.209723) (xy 108.192149 57.187927) (xy 108.19215 57.187918) (xy 108.19215 56.224556) + (xy 108.73115 56.224556) (xy 108.73115 56.421643) (xy 108.769599 56.614934) (xy 108.769599 56.614936) + (xy 108.845017 56.797013) (xy 108.872558 56.838231) (xy 108.954511 56.960882) (xy 109.093868 57.100239) + (xy 109.257736 57.209732) (xy 109.439815 57.285151) (xy 109.633109 57.3236) (xy 109.63311 57.3236) + (xy 109.83019 57.3236) (xy 109.830191 57.3236) (xy 110.023485 57.285151) (xy 110.205564 57.209732) + (xy 110.369432 57.100239) (xy 110.508789 56.960882) (xy 110.618282 56.797014) (xy 110.693701 56.614935) + (xy 110.73215 56.421641) (xy 110.73215 56.224559) (xy 110.732149 56.224556) (xy 111.27115 56.224556) + (xy 111.27115 56.421643) (xy 111.309599 56.614934) (xy 111.309599 56.614936) (xy 111.385017 56.797013) + (xy 111.412558 56.838231) (xy 111.494511 56.960882) (xy 111.633868 57.100239) (xy 111.797736 57.209732) + (xy 111.979815 57.285151) (xy 112.173109 57.3236) (xy 112.17311 57.3236) (xy 112.37019 57.3236) + (xy 112.370191 57.3236) (xy 112.563485 57.285151) (xy 112.745564 57.209732) (xy 112.909432 57.100239) + (xy 113.048789 56.960882) (xy 113.158282 56.797014) (xy 113.233701 56.614935) (xy 113.27215 56.421641) + (xy 113.27215 56.224559) (xy 113.272149 56.224556) (xy 113.81115 56.224556) (xy 113.81115 56.421643) + (xy 113.849599 56.614934) (xy 113.849599 56.614936) (xy 113.925017 56.797013) (xy 113.952558 56.838231) + (xy 114.034511 56.960882) (xy 114.173868 57.100239) (xy 114.337736 57.209732) (xy 114.519815 57.285151) + (xy 114.713109 57.3236) (xy 114.71311 57.3236) (xy 114.91019 57.3236) (xy 114.910191 57.3236) (xy 115.103485 57.285151) + (xy 115.285564 57.209732) (xy 115.449432 57.100239) (xy 115.588789 56.960882) (xy 115.698282 56.797014) + (xy 115.773701 56.614935) (xy 115.81215 56.421641) (xy 115.81215 56.224559) (xy 115.812149 56.224556) + (xy 116.35115 56.224556) (xy 116.35115 56.421643) (xy 116.389599 56.614934) (xy 116.389599 56.614936) + (xy 116.465017 56.797013) (xy 116.492558 56.838231) (xy 116.574511 56.960882) (xy 116.713868 57.100239) + (xy 116.877736 57.209732) (xy 117.059815 57.285151) (xy 117.253109 57.3236) (xy 117.25311 57.3236) + (xy 117.45019 57.3236) (xy 117.450191 57.3236) (xy 117.643485 57.285151) (xy 117.825564 57.209732) + (xy 117.989432 57.100239) (xy 118.128789 56.960882) (xy 118.238282 56.797014) (xy 118.313701 56.614935) + (xy 118.35215 56.421641) (xy 118.35215 56.224559) (xy 118.313701 56.031265) (xy 118.238282 55.849186) + (xy 118.128789 55.685318) (xy 117.989432 55.545961) (xy 117.860606 55.459882) (xy 117.825563 55.436467) + (xy 117.643485 55.361049) (xy 117.450193 55.3226) (xy 117.450191 55.3226) (xy 117.253109 55.3226) + (xy 117.253106 55.3226) (xy 117.059815 55.361049) (xy 117.059813 55.361049) (xy 116.877736 55.436467) + (xy 116.713868 55.545961) (xy 116.713864 55.545964) (xy 116.574514 55.685314) (xy 116.574511 55.685318) + (xy 116.465017 55.849186) (xy 116.389599 56.031263) (xy 116.389599 56.031265) (xy 116.35115 56.224556) + (xy 115.812149 56.224556) (xy 115.773701 56.031265) (xy 115.698282 55.849186) (xy 115.588789 55.685318) + (xy 115.449432 55.545961) (xy 115.320606 55.459882) (xy 115.285563 55.436467) (xy 115.103485 55.361049) + (xy 114.910193 55.3226) (xy 114.910191 55.3226) (xy 114.713109 55.3226) (xy 114.713106 55.3226) + (xy 114.519815 55.361049) (xy 114.519813 55.361049) (xy 114.337736 55.436467) (xy 114.173868 55.545961) + (xy 114.173864 55.545964) (xy 114.034514 55.685314) (xy 114.034511 55.685318) (xy 113.925017 55.849186) + (xy 113.849599 56.031263) (xy 113.849599 56.031265) (xy 113.81115 56.224556) (xy 113.272149 56.224556) + (xy 113.233701 56.031265) (xy 113.158282 55.849186) (xy 113.048789 55.685318) (xy 112.909432 55.545961) + (xy 112.780606 55.459882) (xy 112.745563 55.436467) (xy 112.563485 55.361049) (xy 112.370193 55.3226) + (xy 112.370191 55.3226) (xy 112.173109 55.3226) (xy 112.173106 55.3226) (xy 111.979815 55.361049) + (xy 111.979813 55.361049) (xy 111.797736 55.436467) (xy 111.633868 55.545961) (xy 111.633864 55.545964) + (xy 111.494514 55.685314) (xy 111.494511 55.685318) (xy 111.385017 55.849186) (xy 111.309599 56.031263) + (xy 111.309599 56.031265) (xy 111.27115 56.224556) (xy 110.732149 56.224556) (xy 110.693701 56.031265) + (xy 110.618282 55.849186) (xy 110.508789 55.685318) (xy 110.369432 55.545961) (xy 110.240606 55.459882) + (xy 110.205563 55.436467) (xy 110.023485 55.361049) (xy 109.830193 55.3226) (xy 109.830191 55.3226) + (xy 109.633109 55.3226) (xy 109.633106 55.3226) (xy 109.439815 55.361049) (xy 109.439813 55.361049) + (xy 109.257736 55.436467) (xy 109.093868 55.545961) (xy 109.093864 55.545964) (xy 108.954514 55.685314) + (xy 108.954511 55.685318) (xy 108.845017 55.849186) (xy 108.769599 56.031263) (xy 108.769599 56.031265) + (xy 108.73115 56.224556) (xy 108.19215 56.224556) (xy 108.19215 55.458281) (xy 108.192149 55.458272) + (xy 108.183417 55.414379) (xy 108.183415 55.414375) (xy 108.161911 55.382192) (xy 108.150154 55.364596) + (xy 108.14949 55.364152) (xy 108.100374 55.331334) (xy 108.10037 55.331332) (xy 108.056477 55.3226) + (xy 108.05647 55.3226) (xy 106.32683 55.3226) (xy 106.326822 55.3226) (xy 106.282929 55.331332) + (xy 106.282925 55.331334) (xy 106.233148 55.364594) (xy 106.233144 55.364598) (xy 106.199884 55.414375) + (xy 106.199882 55.414379) (xy 106.19115 55.458272) (xy 93.89215 55.458272) (xy 93.89215 51.296849) + (xy 109.84165 51.296849) (xy 109.84165 51.50935) (xy 109.87489 51.719221) (xy 109.940554 51.921315) + (xy 110.037026 52.110653) (xy 110.03703 52.110659) (xy 110.076378 52.164816) (xy 110.076379 52.164816) + (xy 110.708687 51.532507) (xy 110.725725 51.596093) (xy 110.791551 51.710107) (xy 110.884643 51.803199) + (xy 110.998657 51.869025) (xy 111.062239 51.886062) (xy 110.429932 52.518369) (xy 110.429932 52.51837) + (xy 110.48409 52.557719) (xy 110.484096 52.557723) (xy 110.673434 52.654195) (xy 110.875528 52.719859) + (xy 111.0854 52.7531) (xy 111.2979 52.7531) (xy 111.507771 52.719859) (xy 111.709865 52.654195) + (xy 111.899206 52.55772) (xy 111.953366 52.51837) (xy 111.321058 51.886062) (xy 111.384643 51.869025) + (xy 111.498657 51.803199) (xy 111.591749 51.710107) (xy 111.657575 51.596093) (xy 111.674612 51.532508) + (xy 112.30692 52.164816) (xy 112.34627 52.110656) (xy 112.442745 51.921315) (xy 112.508409 51.719221) + (xy 112.54165 51.50935) (xy 112.54165 51.296849) (xy 112.508409 51.086978) (xy 112.442745 50.884884) + (xy 112.346273 50.695546) (xy 112.346269 50.69554) (xy 112.30692 50.641382) (xy 112.306919 50.641382) + (xy 111.674612 51.273689) (xy 111.657575 51.210107) (xy 111.591749 51.096093) (xy 111.498657 51.003001) + (xy 111.384643 50.937175) (xy 111.321057 50.920137) (xy 111.953366 50.287829) (xy 111.953366 50.287828) + (xy 111.899209 50.24848) (xy 111.899203 50.248476) (xy 111.709865 50.152004) (xy 111.507771 50.08634) + (xy 111.310793 50.055142) (xy 111.256276 50.027364) (xy 111.228499 49.972848) (xy 111.23807 49.912416) + (xy 111.281335 49.869151) (xy 111.306964 49.860263) (xy 111.483485 49.825151) (xy 111.665564 49.749732) + (xy 111.829432 49.640239) (xy 111.968789 49.500882) (xy 112.078282 49.337014) (xy 112.153701 49.154935) + (xy 112.19215 48.961641) (xy 112.19215 48.764559) (xy 112.153701 48.571265) (xy 112.078282 48.389186) + (xy 112.032382 48.320491) (xy 114.30765 48.320491) (xy 114.30765 48.439109) (xy 114.315179 48.467207) + (xy 114.338352 48.55369) (xy 114.397657 48.656408) (xy 114.397659 48.65641) (xy 114.397661 48.656413) + (xy 114.481537 48.740289) (xy 114.481539 48.74029) (xy 114.481541 48.740292) (xy 114.58426 48.799597) + (xy 114.584261 48.799597) (xy 114.584264 48.799599) (xy 114.698841 48.8303) (xy 114.698843 48.8303) + (xy 114.817457 48.8303) (xy 114.817459 48.8303) (xy 114.932036 48.799599) (xy 114.932038 48.799597) + (xy 114.93204 48.799597) (xy 115.034758 48.740292) (xy 115.034758 48.740291) (xy 115.034763 48.740289) + (xy 115.118639 48.656413) (xy 115.12014 48.653814) (xy 115.177947 48.55369) (xy 115.177947 48.553688) + (xy 115.177949 48.553686) (xy 115.20865 48.439109) (xy 115.20865 48.320491) (xy 115.177949 48.205914) + (xy 115.177947 48.205911) (xy 115.177947 48.205909) (xy 115.118642 48.103191) (xy 115.11864 48.103189) + (xy 115.118639 48.103187) (xy 115.034763 48.019311) (xy 115.03476 48.019309) (xy 115.034758 48.019307) + (xy 114.932039 47.960002) (xy 114.93204 47.960002) (xy 114.918501 47.956374) (xy 114.817459 47.9293) + (xy 114.698841 47.9293) (xy 114.628717 47.948089) (xy 114.584259 47.960002) (xy 114.481541 48.019307) + (xy 114.397657 48.103191) (xy 114.338352 48.205909) (xy 114.321187 48.269969) (xy 114.30765 48.320491) + (xy 112.032382 48.320491) (xy 111.968789 48.225318) (xy 111.829432 48.085961) (xy 111.665564 47.976468) + (xy 111.665565 47.976468) (xy 111.665563 47.976467) (xy 111.483485 47.901049) (xy 111.290193 47.8626) + (xy 111.290191 47.8626) (xy 111.093109 47.8626) (xy 111.093106 47.8626) (xy 110.899815 47.901049) + (xy 110.899813 47.901049) (xy 110.717736 47.976467) (xy 110.553868 48.085961) (xy 110.553864 48.085964) + (xy 110.414514 48.225314) (xy 110.414511 48.225318) (xy 110.305017 48.389186) (xy 110.229599 48.571263) + (xy 110.229599 48.571265) (xy 110.19115 48.764556) (xy 110.19115 48.961643) (xy 110.229599 49.154934) + (xy 110.229599 49.154936) (xy 110.305017 49.337013) (xy 110.331115 49.376071) (xy 110.414511 49.500882) + (xy 110.553868 49.640239) (xy 110.717736 49.749732) (xy 110.899815 49.825151) (xy 111.076333 49.860263) + (xy 111.129717 49.89016) (xy 111.155333 49.945725) (xy 111.143396 50.005735) (xy 111.098466 50.047267) + (xy 111.072506 50.055142) (xy 110.875528 50.08634) (xy 110.673434 50.152004) (xy 110.484096 50.248476) + (xy 110.484092 50.248478) (xy 110.429932 50.287828) (xy 111.062241 50.920137) (xy 110.998657 50.937175) + (xy 110.884643 51.003001) (xy 110.791551 51.096093) (xy 110.725725 51.210107) (xy 110.708687 51.273691) + (xy 110.076378 50.641382) (xy 110.037028 50.695542) (xy 110.037026 50.695546) (xy 109.940554 50.884884) + (xy 109.87489 51.086978) (xy 109.84165 51.296849) (xy 93.89215 51.296849) (xy 93.89215 46.263791) + (xy 94.13385 46.263791) (xy 94.13385 46.382409) (xy 94.148395 46.436692) (xy 94.164552 46.49699) + (xy 94.223857 46.599708) (xy 94.223859 46.59971) (xy 94.223861 46.599713) (xy 94.307737 46.683589) + (xy 94.307739 46.68359) (xy 94.307741 46.683592) (xy 94.41046 46.742897) (xy 94.410461 46.742897) + (xy 94.410464 46.742899) (xy 94.525041 46.7736) (xy 94.525043 46.7736) (xy 94.643657 46.7736) (xy 94.643659 46.7736) + (xy 94.758236 46.742899) (xy 94.758238 46.742897) (xy 94.75824 46.742897) (xy 94.860958 46.683592) + (xy 94.860958 46.683591) (xy 94.860963 46.683589) (xy 94.944839 46.599713) (xy 94.956596 46.57935) + (xy 95.004147 46.49699) (xy 95.004147 46.496988) (xy 95.004149 46.496986) (xy 95.03485 46.382409) + (xy 95.03485 46.263791) (xy 95.004149 46.149214) (xy 95.004147 46.149211) (xy 95.004147 46.149209) + (xy 94.944842 46.046491) (xy 94.94484 46.046489) (xy 94.944839 46.046487) (xy 94.860963 45.962611) + (xy 94.86096 45.962609) (xy 94.860958 45.962607) (xy 94.758239 45.903302) (xy 94.75824 45.903302) + (xy 94.721046 45.893336) (xy 94.643659 45.8726) (xy 94.525041 45.8726) (xy 94.454917 45.891389) + (xy 94.410459 45.903302) (xy 94.307741 45.962607) (xy 94.223857 46.046491) (xy 94.164552 46.149209) + (xy 94.148081 46.210679) (xy 94.13385 46.263791) (xy 93.89215 46.263791) (xy 93.89215 45.566578) + (xy 97.19115 45.566578) (xy 97.19115 47.079621) (xy 97.191151 47.079623) (xy 97.206002 47.173399) + (xy 97.206004 47.173404) (xy 97.2636 47.286442) (xy 97.353308 47.37615) (xy 97.466346 47.433746) + (xy 97.560131 47.4486) (xy 98.823168 47.448599) (xy 98.823171 47.448599) (xy 98.823172 47.448598) + (xy 98.870061 47.441172) (xy 98.916949 47.433747) (xy 98.916949 47.433746) (xy 98.916954 47.433746) + (xy 99.029992 47.37615) (xy 99.1197 47.286442) (xy 99.177296 47.173404) (xy 99.19215 47.079619) + (xy 99.192149 46.826862) (xy 99.211056 46.768675) (xy 99.260556 46.732711) (xy 99.321741 46.73271) + (xy 99.371241 46.768674) (xy 99.385304 46.796272) (xy 99.440554 46.966315) (xy 99.537025 47.155652) + (xy 99.661927 47.327564) (xy 99.812185 47.477822) (xy 99.984097 47.602724) (xy 100.173434 47.699195) + (xy 100.375527 47.764858) (xy 100.441649 47.775331) (xy 100.44165 47.77533) (xy 100.44165 46.727245) + (xy 100.508307 46.76573) (xy 100.629115 46.7981) (xy 100.754185 46.7981) (xy 100.874993 46.76573) + (xy 100.94165 46.727245) (xy 100.94165 47.775331) (xy 101.007772 47.764858) (xy 101.209865 47.699195) + (xy 101.399202 47.602724) (xy 101.571114 47.477822) (xy 101.721372 47.327564) (xy 101.846274 47.155652) + (xy 101.942745 46.966315) (xy 102.008409 46.764221) (xy 102.021876 46.679193) (xy 102.049653 46.624677) + (xy 102.10417 46.596899) (xy 102.164602 46.60647) (xy 102.207866 46.649735) (xy 102.216755 46.675365) + (xy 102.229599 46.739936) (xy 102.305017 46.922013) (xy 102.305018 46.922014) (xy 102.414511 47.085882) + (xy 102.553868 47.225239) (xy 102.717736 47.334732) (xy 102.899815 47.410151) (xy 103.093109 47.4486) + (xy 103.09311 47.4486) (xy 103.29019 47.4486) (xy 103.290191 47.4486) (xy 103.483485 47.410151) + (xy 103.665564 47.334732) (xy 103.829432 47.225239) (xy 103.968789 47.085882) (xy 104.078282 46.922014) + (xy 104.153701 46.739935) (xy 104.19215 46.546641) (xy 104.19215 46.099559) (xy 104.192149 46.099556) + (xy 104.69115 46.099556) (xy 104.69115 46.546643) (xy 104.711657 46.649735) (xy 104.726011 46.721899) + (xy 104.729599 46.739934) (xy 104.729599 46.739936) (xy 104.805017 46.922013) (xy 104.805018 46.922014) + (xy 104.914511 47.085882) (xy 105.053868 47.225239) (xy 105.217736 47.334732) (xy 105.399815 47.410151) + (xy 105.593109 47.4486) (xy 105.59311 47.4486) (xy 105.79019 47.4486) (xy 105.790191 47.4486) (xy 105.983485 47.410151) + (xy 106.165564 47.334732) (xy 106.329432 47.225239) (xy 106.468789 47.085882) (xy 106.578282 46.922014) + (xy 106.653701 46.739935) (xy 106.69215 46.546641) (xy 106.69215 46.099559) (xy 106.653701 45.906265) + (xy 106.578282 45.724186) (xy 106.468789 45.560318) (xy 106.366743 45.458272) (xy 110.19115 45.458272) + (xy 110.19115 47.187927) (xy 110.199882 47.23182) (xy 110.199883 47.231822) (xy 110.233146 47.281604) + (xy 110.282928 47.314867) (xy 110.293977 47.317064) (xy 110.326822 47.323599) (xy 110.326828 47.323599) + (xy 110.32683 47.3236) (xy 110.326831 47.3236) (xy 112.056469 47.3236) (xy 112.05647 47.3236) (xy 112.056471 47.323599) + (xy 112.056477 47.323599) (xy 112.078273 47.319262) (xy 112.100372 47.314867) (xy 112.150154 47.281604) + (xy 112.183417 47.231822) (xy 112.19215 47.18792) (xy 112.19215 45.566578) (xy 115.19115 45.566578) + (xy 115.19115 47.079621) (xy 115.191151 47.079623) (xy 115.206002 47.173399) (xy 115.206004 47.173404) + (xy 115.2636 47.286442) (xy 115.353308 47.37615) (xy 115.466346 47.433746) (xy 115.560131 47.4486) + (xy 116.823168 47.448599) (xy 116.823171 47.448599) (xy 116.823172 47.448598) (xy 116.870061 47.441172) + (xy 116.916949 47.433747) (xy 116.916949 47.433746) (xy 116.916954 47.433746) (xy 117.029992 47.37615) + (xy 117.1197 47.286442) (xy 117.177296 47.173404) (xy 117.19215 47.079619) (xy 117.192149 45.566582) + (xy 117.192149 45.566581) (xy 117.192149 45.566578) (xy 117.192148 45.566576) (xy 117.177297 45.4728) + (xy 117.177296 45.472798) (xy 117.177296 45.472796) (xy 117.1197 45.359758) (xy 117.029992 45.27005) + (xy 116.916954 45.212454) (xy 116.916955 45.212454) (xy 116.823171 45.1976) (xy 115.560128 45.1976) + (xy 115.560126 45.197601) (xy 115.46635 45.212452) (xy 115.466345 45.212454) (xy 115.353309 45.270049) + (xy 115.263599 45.359759) (xy 115.206004 45.472795) (xy 115.19115 45.566578) (xy 112.19215 45.566578) + (xy 112.19215 45.45828) (xy 112.192149 45.458278) (xy 112.192149 45.458272) (xy 112.183417 45.414379) + (xy 112.183415 45.414375) (xy 112.150155 45.364598) (xy 112.150154 45.364596) (xy 112.142913 45.359758) + (xy 112.100374 45.331334) (xy 112.10037 45.331332) (xy 112.056477 45.3226) (xy 112.05647 45.3226) + (xy 110.32683 45.3226) (xy 110.326822 45.3226) (xy 110.282929 45.331332) (xy 110.282925 45.331334) + (xy 110.233148 45.364594) (xy 110.233144 45.364598) (xy 110.199884 45.414375) (xy 110.199882 45.414379) + (xy 110.19115 45.458272) (xy 106.366743 45.458272) (xy 106.329432 45.420961) (xy 106.219938 45.347799) + (xy 106.165563 45.311467) (xy 105.983485 45.236049) (xy 105.790193 45.1976) (xy 105.790191 45.1976) + (xy 105.593109 45.1976) (xy 105.593106 45.1976) (xy 105.399815 45.236049) (xy 105.399813 45.236049) + (xy 105.217736 45.311467) (xy 105.053868 45.420961) (xy 105.053864 45.420964) (xy 104.914514 45.560314) + (xy 104.914511 45.560318) (xy 104.805017 45.724186) (xy 104.729599 45.906263) (xy 104.729599 45.906265) + (xy 104.69115 46.099556) (xy 104.192149 46.099556) (xy 104.153701 45.906265) (xy 104.078282 45.724186) + (xy 103.968789 45.560318) (xy 103.829432 45.420961) (xy 103.719938 45.347799) (xy 103.665563 45.311467) + (xy 103.483485 45.236049) (xy 103.290193 45.1976) (xy 103.290191 45.1976) (xy 103.093109 45.1976) + (xy 103.093106 45.1976) (xy 102.899815 45.236049) (xy 102.899813 45.236049) (xy 102.717736 45.311467) + (xy 102.553868 45.420961) (xy 102.553864 45.420964) (xy 102.414514 45.560314) (xy 102.414511 45.560318) + (xy 102.305017 45.724186) (xy 102.229599 45.906263) (xy 102.216755 45.970834) (xy 102.186857 46.024218) + (xy 102.131292 46.049833) (xy 102.071283 46.037896) (xy 102.02975 45.992965) (xy 102.021876 45.967006) + (xy 102.008409 45.881978) (xy 101.942745 45.679884) (xy 101.846274 45.490547) (xy 101.721372 45.318635) + (xy 101.571114 45.168377) (xy 101.399202 45.043475) (xy 101.209865 44.947004) (xy 101.00777 44.88134) + (xy 100.94165 44.870867) (xy 100.94165 45.918954) (xy 100.874993 45.88047) (xy 100.754185 45.8481) + (xy 100.629115 45.8481) (xy 100.508307 45.88047) (xy 100.44165 45.918954) (xy 100.44165 44.870868) + (xy 100.441649 44.870867) (xy 100.37553 44.88134) (xy 100.375528 44.88134) (xy 100.173434 44.947004) + (xy 99.984097 45.043475) (xy 99.812185 45.168377) (xy 99.661927 45.318635) (xy 99.537025 45.490547) + (xy 99.440554 45.679884) (xy 99.385304 45.849929) (xy 99.34934 45.899429) (xy 99.291149 45.918336) + (xy 99.232958 45.899429) (xy 99.196994 45.849929) (xy 99.192149 45.819336) (xy 99.192149 45.566578) + (xy 99.192148 45.566576) (xy 99.177297 45.4728) (xy 99.177296 45.472798) (xy 99.177296 45.472796) + (xy 99.1197 45.359758) (xy 99.029992 45.27005) (xy 98.916954 45.212454) (xy 98.916955 45.212454) + (xy 98.823171 45.1976) (xy 97.560128 45.1976) (xy 97.560126 45.197601) (xy 97.46635 45.212452) (xy 97.466345 45.212454) + (xy 97.353309 45.270049) (xy 97.263599 45.359759) (xy 97.206004 45.472795) (xy 97.19115 45.566578) + (xy 93.89215 45.566578) (xy 93.89215 42.7826) (xy 93.911057 42.724409) (xy 93.960557 42.688445) + (xy 93.99115 42.6836) (xy 123.156881 42.6836) (xy 123.215072 42.702507) (xy 123.226885 42.712596) + (xy 126.162154 45.647864) (xy 126.189931 45.702381) (xy 126.19115 45.717868) (xy 126.19115 47.104621) + (xy 126.191151 47.104623) (xy 126.206002 47.198399) (xy 126.206004 47.198404) (xy 126.2636 47.311442) + (xy 126.353308 47.40115) (xy 126.466346 47.458746) (xy 126.560131 47.4736) (xy 127.823168 47.473599) + (xy 127.823171 47.473599) (xy 127.823172 47.473598) (xy 127.870061 47.466172) (xy 127.916949 47.458747) + (xy 127.916949 47.458746) (xy 127.916954 47.458746) (xy 128.029992 47.40115) (xy 128.1197 47.311442) + (xy 128.177296 47.198404) (xy 128.19215 47.104619) (xy 128.192149 46.851863) (xy 128.211056 46.793676) + (xy 128.260556 46.757712) (xy 128.321741 46.757711) (xy 128.371241 46.793675) (xy 128.385304 46.821273) + (xy 128.440554 46.991315) (xy 128.537025 47.180652) (xy 128.661927 47.352564) (xy 128.812185 47.502822) + (xy 128.984097 47.627724) (xy 129.173434 47.724195) (xy 129.375527 47.789858) (xy 129.441649 47.800331) + (xy 129.44165 47.80033) (xy 129.44165 46.756112) (xy 129.498657 46.789025) (xy 129.625824 46.8231) + (xy 129.757476 46.8231) (xy 129.884643 46.789025) (xy 129.94165 46.756112) (xy 129.94165 47.800331) + (xy 130.007772 47.789858) (xy 130.209865 47.724195) (xy 130.399202 47.627724) (xy 130.571114 47.502822) + (xy 130.721372 47.352564) (xy 130.846274 47.180652) (xy 130.942745 46.991315) (xy 131.008409 46.789221) + (xy 131.04165 46.57935) (xy 131.04165 46.573101) (xy 131.041649 46.5731) (xy 130.124662 46.5731) + (xy 130.157575 46.516093) (xy 130.19165 46.388926) (xy 130.19165 46.257274) (xy 130.157575 46.130107) + (xy 130.124662 46.0731) (xy 131.041649 46.0731) (xy 131.04165 46.073099) (xy 131.04165 46.066849) + (xy 131.008409 45.856978) (xy 130.942745 45.654884) (xy 130.905933 45.582636) (xy 130.885013 45.541578) + (xy 134.79115 45.541578) (xy 134.79115 47.104621) (xy 134.791151 47.104623) (xy 134.806002 47.198399) + (xy 134.806004 47.198404) (xy 134.8636 47.311442) (xy 134.953308 47.40115) (xy 135.066346 47.458746) + (xy 135.160131 47.4736) (xy 136.423168 47.473599) (xy 136.423171 47.473599) (xy 136.423172 47.473598) + (xy 136.470061 47.466172) (xy 136.516949 47.458747) (xy 136.516949 47.458746) (xy 136.516954 47.458746) + (xy 136.629992 47.40115) (xy 136.7197 47.311442) (xy 136.777296 47.198404) (xy 136.79215 47.104619) + (xy 136.792149 46.074556) (xy 137.29115 46.074556) (xy 137.29115 46.571643) (xy 137.30278 46.630107) + (xy 137.327145 46.7526) (xy 137.329599 46.764934) (xy 137.329599 46.764936) (xy 137.405017 46.947013) + (xy 137.424162 46.975665) (xy 137.514511 47.110882) (xy 137.653868 47.250239) (xy 137.817736 47.359732) + (xy 137.999815 47.435151) (xy 138.193109 47.4736) (xy 138.19311 47.4736) (xy 138.39019 47.4736) + (xy 138.390191 47.4736) (xy 138.583485 47.435151) (xy 138.765564 47.359732) (xy 138.929432 47.250239) + (xy 139.068789 47.110882) (xy 139.178282 46.947014) (xy 139.253701 46.764935) (xy 139.29215 46.571641) + (xy 139.29215 46.074559) (xy 139.280679 46.016891) (xy 167.94425 46.016891) (xy 167.94425 46.135509) + (xy 167.967988 46.2241) (xy 167.974952 46.25009) (xy 168.034257 46.352808) (xy 168.034259 46.35281) + (xy 168.034261 46.352813) (xy 168.118137 46.436689) (xy 168.118139 46.43669) (xy 168.118141 46.436692) + (xy 168.22086 46.495997) (xy 168.220861 46.495997) (xy 168.220864 46.495999) (xy 168.335441 46.5267) + (xy 168.335443 46.5267) (xy 168.454057 46.5267) (xy 168.454059 46.5267) (xy 168.568636 46.495999) + (xy 168.568638 46.495997) (xy 168.56864 46.495997) (xy 168.671358 46.436692) (xy 168.671358 46.436691) + (xy 168.671363 46.436689) (xy 168.755239 46.352813) (xy 168.814549 46.250086) (xy 168.816504 46.242791) + (xy 177.09475 46.242791) (xy 177.09475 46.361409) (xy 177.114921 46.436689) (xy 177.125452 46.47599) + (xy 177.184757 46.578708) (xy 177.184759 46.57871) (xy 177.184761 46.578713) (xy 177.268637 46.662589) + (xy 177.268639 46.66259) (xy 177.268641 46.662592) (xy 177.37136 46.721897) (xy 177.371361 46.721897) + (xy 177.371364 46.721899) (xy 177.485941 46.7526) (xy 177.485943 46.7526) (xy 177.604557 46.7526) + (xy 177.604559 46.7526) (xy 177.719136 46.721899) (xy 177.719138 46.721897) (xy 177.71914 46.721897) + (xy 177.821858 46.662592) (xy 177.821858 46.662591) (xy 177.821863 46.662589) (xy 177.905739 46.578713) + (xy 177.941893 46.516093) (xy 177.965047 46.47599) (xy 177.965047 46.475988) (xy 177.965049 46.475986) + (xy 177.99575 46.361409) (xy 177.99575 46.242791) (xy 177.965049 46.128214) (xy 177.965047 46.128211) + (xy 177.965047 46.128209) (xy 177.905742 46.025491) (xy 177.90574 46.025489) (xy 177.905739 46.025487) + (xy 177.821863 45.941611) (xy 177.82186 45.941609) (xy 177.821858 45.941607) (xy 177.719139 45.882302) + (xy 177.71914 45.882302) (xy 177.689757 45.874429) (xy 177.604559 45.8516) (xy 177.485941 45.8516) + (xy 177.415817 45.870389) (xy 177.371359 45.882302) (xy 177.268641 45.941607) (xy 177.184757 46.025491) + (xy 177.125452 46.128209) (xy 177.108287 46.192269) (xy 177.09475 46.242791) (xy 168.816504 46.242791) + (xy 168.84525 46.135509) (xy 168.84525 46.016891) (xy 168.814549 45.902314) (xy 168.814547 45.902311) + (xy 168.814547 45.902309) (xy 168.755242 45.799591) (xy 168.75524 45.799589) (xy 168.755239 45.799587) + (xy 168.671363 45.715711) (xy 168.67136 45.715709) (xy 168.671358 45.715707) (xy 168.568639 45.656402) + (xy 168.56864 45.656402) (xy 168.555101 45.652774) (xy 168.454059 45.6257) (xy 168.335441 45.6257) + (xy 168.265317 45.644489) (xy 168.220859 45.656402) (xy 168.118141 45.715707) (xy 168.034257 45.799591) + (xy 167.974952 45.902309) (xy 167.970426 45.9192) (xy 167.94425 46.016891) (xy 139.280679 46.016891) + (xy 139.253701 45.881265) (xy 139.178282 45.699186) (xy 139.068789 45.535318) (xy 138.929432 45.395961) + (xy 138.802978 45.311467) (xy 138.765563 45.286467) (xy 138.583485 45.211049) (xy 138.537038 45.20181) (xy 209.34115 45.20181) (xy 209.34115 45.444389) (xy 209.372811 45.684881) (xy 209.372811 45.684886) - (xy 209.435594 45.919192) (xy 209.435598 45.919205) (xy 209.528422 46.143304) (xy 209.528424 46.143308) - (xy 209.528426 46.143312) (xy 209.649714 46.353389) (xy 209.649716 46.353392) (xy 209.797379 46.545831) - (xy 209.797381 46.545833) (xy 209.797385 46.545838) (xy 209.968912 46.717365) (xy 209.968916 46.717368) - (xy 209.968918 46.71737) (xy 210.081322 46.80362) (xy 210.161361 46.865036) (xy 210.371438 46.986324) - (xy 210.59555 47.079154) (xy 210.829861 47.141938) (xy 211.070362 47.1736) (xy 211.070363 47.1736) - (xy 211.312937 47.1736) (xy 211.312938 47.1736) (xy 211.553439 47.141938) (xy 211.78775 47.079154) - (xy 212.011862 46.986324) (xy 212.221939 46.865036) (xy 212.414388 46.717365) (xy 212.585915 46.545838) - (xy 212.733586 46.353389) (xy 212.854874 46.143312) (xy 212.947704 45.9192) (xy 213.010488 45.684889) - (xy 213.04215 45.444388) (xy 213.04215 45.201812) (xy 213.010488 44.961311) (xy 212.947704 44.727) - (xy 212.854874 44.502888) (xy 212.733586 44.292811) (xy 212.585915 44.100362) (xy 212.414388 43.928835) - (xy 212.414383 43.928831) (xy 212.414381 43.928829) (xy 212.221942 43.781166) (xy 212.221939 43.781164) - (xy 212.011862 43.659876) (xy 212.011858 43.659874) (xy 212.011854 43.659872) (xy 211.787755 43.567048) - (xy 211.787754 43.567047) (xy 211.78775 43.567046) (xy 211.553439 43.504262) (xy 211.553436 43.504261) - (xy 211.553434 43.504261) (xy 211.312939 43.4726) (xy 211.312938 43.4726) (xy 211.070362 43.4726) - (xy 211.07036 43.4726) (xy 210.829868 43.504261) (xy 210.829863 43.504261) (xy 210.595557 43.567044) - (xy 210.595544 43.567048) (xy 210.371445 43.659872) (xy 210.161357 43.781166) (xy 209.968918 43.928829) - (xy 209.797379 44.100368) (xy 209.649716 44.292807) (xy 209.528422 44.502895) (xy 209.435598 44.726994) - (xy 209.435594 44.727007) (xy 209.372811 44.961313) (xy 209.372811 44.961318) (xy 209.34115 45.20181) - (xy 138.912132 45.20181) (xy 138.894644 45.189104) (xy 138.894643 45.189103) (xy 138.894641 45.189102) - (xy 138.733287 45.106888) (xy 138.561056 45.050928) (xy 138.382199 45.0226) (xy 138.382196 45.0226) - (xy 138.201104 45.0226) (xy 138.201101 45.0226) (xy 138.022243 45.050928) (xy 137.850012 45.106888) - (xy 137.688658 45.189102) (xy 137.615402 45.242325) (xy 137.542149 45.295547) (xy 137.414097 45.423599) - (xy 137.376244 45.4757) (xy 137.307652 45.570108) (xy 137.225438 45.731462) (xy 137.169478 45.903693) - (xy 137.14115 46.08255) (xy 136.94215 46.08255) (xy 136.94215 45.529998) (xy 136.931527 45.441536) - (xy 136.876011 45.300758) (xy 136.784572 45.180178) (xy 136.663992 45.088739) (xy 136.663991 45.088738) - (xy 136.663989 45.088737) (xy 136.523215 45.033223) (xy 136.434756 45.0226) (xy 136.434752 45.0226) - (xy 135.148548 45.0226) (xy 135.148543 45.0226) (xy 135.060084 45.033223) (xy 134.91931 45.088737) - (xy 134.919306 45.08874) (xy 134.798731 45.180175) (xy 134.798725 45.180181) (xy 134.70729 45.300756) - (xy 134.707287 45.30076) (xy 134.651773 45.441534) (xy 134.64115 45.529993) (xy 130.87911 45.529993) - (xy 130.846274 45.465548) (xy 130.721372 45.293635) (xy 130.571114 45.143377) (xy 130.399202 45.018475) + (xy 209.403547 45.799591) (xy 209.435364 45.918336) (xy 209.435594 45.919192) (xy 209.435598 45.919205) + (xy 209.528422 46.143304) (xy 209.528424 46.143308) (xy 209.528426 46.143312) (xy 209.649714 46.353389) + (xy 209.649716 46.353392) (xy 209.797379 46.545831) (xy 209.797381 46.545833) (xy 209.797385 46.545838) + (xy 209.968912 46.717365) (xy 209.968916 46.717368) (xy 209.968918 46.71737) (xy 210.071746 46.796272) + (xy 210.161361 46.865036) (xy 210.371438 46.986324) (xy 210.59555 47.079154) (xy 210.829861 47.141938) + (xy 211.070362 47.1736) (xy 211.070363 47.1736) (xy 211.312937 47.1736) (xy 211.312938 47.1736) + (xy 211.553439 47.141938) (xy 211.78775 47.079154) (xy 212.011862 46.986324) (xy 212.221939 46.865036) + (xy 212.414388 46.717365) (xy 212.585915 46.545838) (xy 212.733586 46.353389) (xy 212.854874 46.143312) + (xy 212.947704 45.9192) (xy 213.010488 45.684889) (xy 213.04215 45.444388) (xy 213.04215 45.201812) + (xy 213.010488 44.961311) (xy 212.947704 44.727) (xy 212.854874 44.502888) (xy 212.733586 44.292811) + (xy 212.585915 44.100362) (xy 212.414388 43.928835) (xy 212.414383 43.928831) (xy 212.414381 43.928829) + (xy 212.221942 43.781166) (xy 212.221939 43.781164) (xy 212.011862 43.659876) (xy 212.011858 43.659874) + (xy 212.011854 43.659872) (xy 211.787755 43.567048) (xy 211.787754 43.567047) (xy 211.78775 43.567046) + (xy 211.553439 43.504262) (xy 211.553436 43.504261) (xy 211.553434 43.504261) (xy 211.312939 43.4726) + (xy 211.312938 43.4726) (xy 211.070362 43.4726) (xy 211.07036 43.4726) (xy 210.829868 43.504261) + (xy 210.829863 43.504261) (xy 210.595557 43.567044) (xy 210.595544 43.567048) (xy 210.371445 43.659872) + (xy 210.161357 43.781166) (xy 209.968918 43.928829) (xy 209.797379 44.100368) (xy 209.649716 44.292807) + (xy 209.528422 44.502895) (xy 209.435598 44.726994) (xy 209.435594 44.727007) (xy 209.372811 44.961313) + (xy 209.372811 44.961318) (xy 209.34115 45.20181) (xy 138.537038 45.20181) (xy 138.390193 45.1726) + (xy 138.390191 45.1726) (xy 138.193109 45.1726) (xy 138.193106 45.1726) (xy 137.999815 45.211049) + (xy 137.999813 45.211049) (xy 137.817736 45.286467) (xy 137.653868 45.395961) (xy 137.653864 45.395964) + (xy 137.514514 45.535314) (xy 137.514511 45.535318) (xy 137.405017 45.699186) (xy 137.329599 45.881263) + (xy 137.329599 45.881265) (xy 137.29115 46.074556) (xy 136.792149 46.074556) (xy 136.792149 45.541582) + (xy 136.792149 45.541581) (xy 136.792149 45.541578) (xy 136.792148 45.541576) (xy 136.777297 45.4478) + (xy 136.777296 45.447798) (xy 136.777296 45.447796) (xy 136.7197 45.334758) (xy 136.629992 45.24505) + (xy 136.516954 45.187454) (xy 136.516955 45.187454) (xy 136.423171 45.1726) (xy 135.160128 45.1726) + (xy 135.160126 45.172601) (xy 135.06635 45.187452) (xy 135.066345 45.187454) (xy 134.953309 45.245049) + (xy 134.863599 45.334759) (xy 134.806004 45.447795) (xy 134.79115 45.541578) (xy 130.885013 45.541578) + (xy 130.846274 45.465547) (xy 130.721372 45.293635) (xy 130.571114 45.143377) (xy 130.399202 45.018475) (xy 130.209865 44.922004) (xy 130.00777 44.85634) (xy 129.94165 44.845867) (xy 129.94165 45.890088) (xy 129.884643 45.857175) (xy 129.757476 45.8231) (xy 129.625824 45.8231) (xy 129.498657 45.857175) (xy 129.44165 45.890088) (xy 129.44165 44.845868) (xy 129.441649 44.845867) (xy 129.37553 44.85634) (xy 129.375528 44.85634) (xy 129.173434 44.922004) (xy 128.984097 45.018475) (xy 128.812185 45.143377) - (xy 128.661927 45.293635) (xy 128.537025 45.465548) (xy 128.520765 45.49746) (xy 128.477499 45.540724) - (xy 128.417067 45.550294) (xy 128.362551 45.522515) (xy 128.334775 45.467998) (xy 128.334262 45.464315) - (xy 128.332375 45.448599) (xy 128.331527 45.441536) (xy 128.276011 45.300758) (xy 128.184572 45.180178) - (xy 128.063992 45.088739) (xy 128.063991 45.088738) (xy 128.063989 45.088737) (xy 127.923215 45.033223) - (xy 127.834756 45.0226) (xy 127.834752 45.0226) (xy 126.548548 45.0226) (xy 126.548536 45.0226) - (xy 126.515076 45.026618) (xy 126.455046 45.014782) (xy 126.433271 44.998328) (xy 125.001987 43.567044) - (xy 123.547563 42.11262) (xy 123.54756 42.112618) (xy 123.547559 42.112617) (xy 123.547558 42.112616) - (xy 123.456241 42.059894) (xy 123.456243 42.059894) (xy 123.41672 42.049304) (xy 123.354377 42.0326) - (xy 93.694377 42.0326) (xy 93.588923 42.0326) (xy 93.487063 42.059893) (xy 93.487062 42.059893) - (xy 93.48706 42.059894) (xy 93.487059 42.059894) (xy 93.395739 42.112618) (xy 93.321168 42.187189) - (xy 93.268444 42.278509) (xy 93.268444 42.27851) (xy 93.24115 42.380374) (xy 93.24115 63.216199) - (xy 93.222243 63.27439) (xy 93.212154 63.286203) (xy 91.021166 65.477191) (xy 90.968443 65.568511) - (xy 90.968442 65.568511) (xy 90.968443 65.568512) (xy 90.94115 65.670373) (xy 90.94115 69.796199) - (xy 90.922243 69.85439) (xy 90.912154 69.866203) (xy 87.495737 73.28262) (xy 87.495736 73.282619) - (xy 87.42117 73.357186) (xy 87.421166 73.357191) (xy 87.368444 73.448507) (xy 87.368443 73.448512) - (xy 87.34115 73.550373) (xy 80.795004 73.550373) (xy 80.783287 61.959343) (xy 90.47005 61.959343) - (xy 90.47005 62.117457) (xy 90.510973 62.270184) (xy 90.59003 62.407116) (xy 90.701834 62.51892) - (xy 90.838766 62.597977) (xy 90.991493 62.6389) (xy 90.991495 62.6389) (xy 91.149605 62.6389) (xy 91.149607 62.6389) - (xy 91.302334 62.597977) (xy 91.439266 62.51892) (xy 91.55107 62.407116) (xy 91.630127 62.270184) - (xy 91.67105 62.117457) (xy 91.67105 61.959343) (xy 91.630127 61.806616) (xy 91.55107 61.669684) - (xy 91.439266 61.55788) (xy 91.302334 61.478823) (xy 91.149607 61.4379) (xy 90.991493 61.4379) (xy 90.838766 61.478823) - (xy 90.701834 61.55788) (xy 90.59003 61.669684) (xy 90.510973 61.806616) (xy 90.47005 61.959343) - (xy 80.783287 61.959343) (xy 80.766348 45.20181) (xy 83.34115 45.20181) (xy 83.34115 45.444389) - (xy 83.372811 45.684881) (xy 83.372811 45.684886) (xy 83.435594 45.919192) (xy 83.435598 45.919205) + (xy 128.661927 45.293635) (xy 128.537025 45.465547) (xy 128.440554 45.654884) (xy 128.385304 45.824929) + (xy 128.34934 45.874429) (xy 128.291149 45.893336) (xy 128.232958 45.874429) (xy 128.196994 45.824929) + (xy 128.192149 45.794336) (xy 128.192149 45.541578) (xy 128.192148 45.541576) (xy 128.177297 45.4478) + (xy 128.177296 45.447798) (xy 128.177296 45.447796) (xy 128.1197 45.334758) (xy 128.029992 45.24505) + (xy 127.916954 45.187454) (xy 127.916955 45.187454) (xy 127.823171 45.1726) (xy 126.560128 45.1726) + (xy 126.560126 45.172601) (xy 126.467753 45.18723) (xy 126.407321 45.177658) (xy 126.382264 45.159453) + (xy 125.003975 43.781164) (xy 123.443547 42.220736) (xy 123.443545 42.220735) (xy 123.443544 42.220734) + (xy 123.351479 42.1826) (xy 123.351478 42.1826) (xy 93.691478 42.1826) (xy 93.591822 42.1826) (xy 93.591821 42.1826) + (xy 93.499755 42.220734) (xy 93.429284 42.291205) (xy 93.39115 42.383271) (xy 93.39115 63.278331) + (xy 93.372243 63.336522) (xy 93.362154 63.348335) (xy 91.199753 65.510736) (xy 91.199752 65.510735) + (xy 91.129285 65.581203) (xy 91.09115 65.673271) (xy 91.09115 69.858331) (xy 91.072243 69.916522) + (xy 91.062154 69.928334) (xy 87.599753 73.390735) (xy 87.599753 73.390736) (xy 87.599752 73.390735) + (xy 87.529285 73.461203) (xy 87.49115 73.553271) (xy 80.795006 73.553271) (xy 80.783307 61.979091) + (xy 90.62005 61.979091) (xy 90.62005 62.097709) (xy 90.647124 62.198751) (xy 90.650752 62.21229) + (xy 90.710057 62.315008) (xy 90.710059 62.31501) (xy 90.710061 62.315013) (xy 90.793937 62.398889) + (xy 90.793939 62.39889) (xy 90.793941 62.398892) (xy 90.89666 62.458197) (xy 90.896661 62.458197) + (xy 90.896664 62.458199) (xy 91.011241 62.4889) (xy 91.011243 62.4889) (xy 91.129857 62.4889) (xy 91.129859 62.4889) + (xy 91.244436 62.458199) (xy 91.244438 62.458197) (xy 91.24444 62.458197) (xy 91.347158 62.398892) + (xy 91.347158 62.398891) (xy 91.347163 62.398889) (xy 91.431039 62.315013) (xy 91.490349 62.212286) + (xy 91.52105 62.097709) (xy 91.52105 61.979091) (xy 91.490349 61.864514) (xy 91.490347 61.864511) + (xy 91.490347 61.864509) (xy 91.431042 61.761791) (xy 91.43104 61.761789) (xy 91.431039 61.761787) + (xy 91.347163 61.677911) (xy 91.34716 61.677909) (xy 91.347158 61.677907) (xy 91.244439 61.618602) + (xy 91.24444 61.618602) (xy 91.214173 61.610492) (xy 91.129859 61.5879) (xy 91.011241 61.5879) (xy 90.951174 61.603995) + (xy 90.896659 61.618602) (xy 90.793941 61.677907) (xy 90.710057 61.761791) (xy 90.650752 61.864509) + (xy 90.650751 61.864514) (xy 90.62005 61.979091) (xy 80.783307 61.979091) (xy 80.766348 45.20181) + (xy 83.34115 45.20181) (xy 83.34115 45.444389) (xy 83.372811 45.684881) (xy 83.372811 45.684886) + (xy 83.403547 45.799591) (xy 83.435364 45.918336) (xy 83.435594 45.919192) (xy 83.435598 45.919205) (xy 83.528422 46.143304) (xy 83.528424 46.143308) (xy 83.528426 46.143312) (xy 83.649714 46.353389) (xy 83.649716 46.353392) (xy 83.797379 46.545831) (xy 83.797381 46.545833) (xy 83.797385 46.545838) - (xy 83.968912 46.717365) (xy 83.968916 46.717368) (xy 83.968918 46.71737) (xy 84.081322 46.80362) + (xy 83.968912 46.717365) (xy 83.968916 46.717368) (xy 83.968918 46.71737) (xy 84.071746 46.796272) (xy 84.161361 46.865036) (xy 84.371438 46.986324) (xy 84.59555 47.079154) (xy 84.829861 47.141938) (xy 85.070362 47.1736) (xy 85.070363 47.1736) (xy 85.312937 47.1736) (xy 85.312938 47.1736) (xy 85.553439 47.141938) (xy 85.78775 47.079154) (xy 86.011862 46.986324) (xy 86.221939 46.865036) (xy 86.414388 46.717365) @@ -47389,23 +54652,214 @@ (xy 85.312937 137.1736) (xy 85.312938 137.1736) (xy 85.553439 137.141938) (xy 85.78775 137.079154) (xy 86.011862 136.986324) (xy 86.221939 136.865036) (xy 86.414388 136.717365) (xy 86.585915 136.545838) (xy 86.733586 136.353389) (xy 86.854874 136.143312) (xy 86.947704 135.9192) (xy 87.010488 135.684889) - (xy 87.04215 135.444388) (xy 87.04215 135.201812) (xy 87.010488 134.961311) (xy 86.947704 134.727) - (xy 86.854874 134.502888) (xy 86.733586 134.292811) (xy 86.585915 134.100362) (xy 86.414388 133.928835) - (xy 86.414383 133.928831) (xy 86.414381 133.928829) (xy 86.221942 133.781166) (xy 86.18369 133.759081) - (xy 86.011862 133.659876) (xy 86.011858 133.659874) (xy 86.011854 133.659872) (xy 85.787755 133.567048) - (xy 85.787754 133.567047) (xy 85.78775 133.567046) (xy 85.553439 133.504262) (xy 85.553436 133.504261) - (xy 85.553434 133.504261) (xy 85.312939 133.4726) (xy 85.312938 133.4726) (xy 85.070362 133.4726) - (xy 85.07036 133.4726) (xy 84.829868 133.504261) (xy 84.829863 133.504261) (xy 84.595557 133.567044) - (xy 84.595544 133.567048) (xy 84.371445 133.659872) (xy 84.161357 133.781166) (xy 83.968918 133.928829) - (xy 83.797379 134.100368) (xy 83.649716 134.292807) (xy 83.528422 134.502895) (xy 83.435598 134.726994) - (xy 83.435594 134.727007) (xy 83.372811 134.961313) (xy 83.372811 134.961318) (xy 83.34115 135.20181) - (xy 80.857322 135.20181) (xy 80.854823 132.729993) (xy 171.09115 132.729993) (xy 171.09115 134.916206) - (xy 171.101773 135.004665) (xy 171.157287 135.145439) (xy 171.157288 135.145441) (xy 171.157289 135.145442) - (xy 171.248728 135.266022) (xy 171.369308 135.357461) (xy 171.369309 135.357461) (xy 171.36931 135.357462) - (xy 171.437088 135.38419) (xy 171.510086 135.412977) (xy 171.598548 135.4236) (xy 171.59855 135.4236) - (xy 173.78475 135.4236) (xy 173.784752 135.4236) (xy 173.873214 135.412977) (xy 174.013992 135.357461) - (xy 174.134572 135.266022) (xy 174.226011 135.145442) (xy 174.281527 135.004664) (xy 174.29215 134.916202) - (xy 174.29215 133.705121) (xy 175.89165 133.705121) (xy 175.89165 133.941078) (xy 175.922448 134.175008) + (xy 87.029472 135.540691) (xy 141.4495 135.540691) (xy 141.4495 135.659309) (xy 141.476574 135.760351) + (xy 141.480202 135.77389) (xy 141.539507 135.876608) (xy 141.539509 135.87661) (xy 141.539511 135.876613) + (xy 141.623387 135.960489) (xy 141.623389 135.96049) (xy 141.623391 135.960492) (xy 141.72611 136.019797) + (xy 141.726111 136.019797) (xy 141.726114 136.019799) (xy 141.840691 136.0505) (xy 141.840693 136.0505) + (xy 141.959307 136.0505) (xy 141.959309 136.0505) (xy 142.073886 136.019799) (xy 142.073888 136.019797) + (xy 142.07389 136.019797) (xy 142.176608 135.960492) (xy 142.176608 135.960491) (xy 142.176613 135.960489) + (xy 142.260489 135.876613) (xy 142.278314 135.845739) (xy 142.319797 135.77389) (xy 142.319797 135.773888) + (xy 142.319799 135.773886) (xy 142.3505 135.659309) (xy 142.3505 135.540691) (xy 142.319799 135.426114) + (xy 142.319797 135.426111) (xy 142.319797 135.426109) (xy 142.260492 135.323391) (xy 142.260488 135.323386) + (xy 142.179496 135.242393) (xy 142.151719 135.187876) (xy 142.1505 135.17239) (xy 142.1505 133.994769) + (xy 142.152968 133.987171) (xy 142.151719 133.979282) (xy 142.156121 133.970642) (xy 142.156121 133.9634) + (xy 142.165851 133.947521) (xy 142.169407 133.936578) (xy 142.179496 133.924765) (xy 142.812831 133.29143) + (xy 158.875 133.29143) (xy 158.875 133.534999) (xy 158.875001 133.535) (xy 159.525 133.535) (xy 159.525 134.035) + (xy 158.875001 134.035) (xy 158.875 134.035001) (xy 158.875 134.278569) (xy 158.911508 134.462104) + (xy 158.911508 134.462106) (xy 158.983118 134.634989) (xy 158.983124 134.635001) (xy 159.087087 134.790589) + (xy 159.08709 134.790593) (xy 159.219406 134.922909) (xy 159.21941 134.922912) (xy 159.374998 135.026875) + (xy 159.37501 135.026881) (xy 159.547888 135.098489) (xy 159.547899 135.098492) (xy 159.575 135.103882) + (xy 159.575 134.351988) (xy 159.58494 134.369205) (xy 159.640795 134.42506) (xy 159.709204 134.464556) + (xy 159.785504 134.485) (xy 159.864496 134.485) (xy 159.940796 134.464556) (xy 160.009205 134.42506) + (xy 160.06506 134.369205) (xy 160.075 134.351988) (xy 160.075 135.103881) (xy 160.1021 135.098492) + (xy 160.102111 135.098489) (xy 160.274989 135.026881) (xy 160.275001 135.026875) (xy 160.430589 134.922912) + (xy 160.430593 134.922909) (xy 160.562909 134.790593) (xy 160.562912 134.790589) (xy 160.666875 134.635001) + (xy 160.666881 134.634989) (xy 160.738491 134.462106) (xy 160.738491 134.462104) (xy 160.774999 134.278569) + (xy 160.775 134.278565) (xy 160.775 134.035001) (xy 160.774999 134.035) (xy 160.125 134.035) (xy 160.125 133.535) + (xy 160.774999 133.535) (xy 160.775 133.534999) (xy 160.775 133.291434) (xy 160.774999 133.29143) + (xy 160.738491 133.107895) (xy 160.738491 133.107893) (xy 160.666881 132.93501) (xy 160.666875 132.934998) + (xy 160.562912 132.77941) (xy 160.562909 132.779406) (xy 160.430593 132.64709) (xy 160.430589 132.647087) + (xy 160.275001 132.543124) (xy 160.274992 132.54312) (xy 160.102105 132.471508) (xy 160.075 132.466116) + (xy 160.075 133.218011) (xy 160.06506 133.200795) (xy 160.009205 133.14494) (xy 159.940796 133.105444) + (xy 159.864496 133.085) (xy 159.785504 133.085) (xy 159.709204 133.105444) (xy 159.640795 133.14494) + (xy 159.58494 133.200795) (xy 159.575 133.218011) (xy 159.575 132.466116) (xy 159.547894 132.471508) + (xy 159.375007 132.54312) (xy 159.374998 132.543124) (xy 159.21941 132.647087) (xy 159.219406 132.64709) + (xy 159.08709 132.779406) (xy 159.087087 132.77941) (xy 158.983124 132.934998) (xy 158.983118 132.93501) + (xy 158.911508 133.107893) (xy 158.911508 133.107895) (xy 158.875 133.29143) (xy 142.812831 133.29143) + (xy 144.074765 132.029496) (xy 144.129282 132.001719) (xy 144.144769 132.0005) (xy 151.549829 132.0005) + (xy 151.607885 131.976451) (xy 151.641897 131.962364) (xy 154.042831 129.56143) (xy 158.875 129.56143) + (xy 158.875 130.154999) (xy 158.875001 130.155) (xy 159.525 130.155) (xy 159.525 130.655) (xy 158.875001 130.655) + (xy 158.875 130.655001) (xy 158.875 131.248569) (xy 158.911508 131.432104) (xy 158.911508 131.432106) + (xy 158.983118 131.604989) (xy 158.983124 131.605001) (xy 159.087087 131.760589) (xy 159.08709 131.760593) + (xy 159.219406 131.892909) (xy 159.21941 131.892912) (xy 159.374998 131.996875) (xy 159.37501 131.996881) + (xy 159.547888 132.068489) (xy 159.547899 132.068492) (xy 159.575 132.073882) (xy 159.575 131.321988) + (xy 159.58494 131.339205) (xy 159.640795 131.39506) (xy 159.709204 131.434556) (xy 159.785504 131.455) + (xy 159.864496 131.455) (xy 159.940796 131.434556) (xy 160.009205 131.39506) (xy 160.06506 131.339205) + (xy 160.075 131.321988) (xy 160.075 132.073881) (xy 160.1021 132.068492) (xy 160.102111 132.068489) + (xy 160.274989 131.996881) (xy 160.275001 131.996875) (xy 160.430589 131.892912) (xy 160.430593 131.892909) + (xy 160.562909 131.760593) (xy 160.562912 131.760589) (xy 160.666879 131.604994) (xy 160.671571 131.593666) + (xy 160.711306 131.547139) (xy 160.770801 131.532854) (xy 160.800922 131.540085) (xy 160.927065 131.592335) + (xy 161.091279 131.624999) (xy 161.091283 131.625) (xy 161.258717 131.625) (xy 161.25872 131.624999) + (xy 161.422933 131.592335) (xy 161.422939 131.592333) (xy 161.575559 131.529114) (xy 160.998223 130.951777) + (xy 160.781664 130.735218) (xy 160.975 130.735218) (xy 160.975 130.814782) (xy 161.005448 130.888291) + (xy 161.061709 130.944552) (xy 161.135218 130.975) (xy 161.214782 130.975) (xy 161.288291 130.944552) + (xy 161.344552 130.888291) (xy 161.375 130.814782) (xy 161.375 130.735218) (xy 161.344552 130.661709) + (xy 161.288291 130.605448) (xy 161.214782 130.575) (xy 161.135218 130.575) (xy 161.061709 130.605448) + (xy 161.005448 130.661709) (xy 160.975 130.735218) (xy 160.781664 130.735218) (xy 160.392939 130.346493) + (xy 160.365162 130.291976) (xy 160.374733 130.231544) (xy 160.39294 130.206485) (xy 160.499425 130.1) + (xy 160.853555 130.1) (xy 161.175 130.421445) (xy 161.496445 130.1) (xy 161.175 129.778555) (xy 160.853555 130.1) + (xy 160.499425 130.1) (xy 160.392939 129.993514) (xy 160.365162 129.938997) (xy 160.374733 129.878565) + (xy 160.392939 129.853506) (xy 160.821446 129.424999) (xy 160.781665 129.385218) (xy 160.975 129.385218) + (xy 160.975 129.464782) (xy 161.005448 129.538291) (xy 161.061709 129.594552) (xy 161.135218 129.625) + (xy 161.214782 129.625) (xy 161.288291 129.594552) (xy 161.344552 129.538291) (xy 161.375 129.464782) + (xy 161.375 129.385218) (xy 161.344552 129.311709) (xy 161.288291 129.255448) (xy 161.214782 129.225) + (xy 161.135218 129.225) (xy 161.061709 129.255448) (xy 161.005448 129.311709) (xy 160.975 129.385218) + (xy 160.781665 129.385218) (xy 160.392939 128.996492) (xy 160.365162 128.941976) (xy 160.373089 128.891919) + (xy 160.371692 128.877733) (xy 160.274991 128.81312) (xy 160.231087 128.794934) (xy 160.102105 128.741508) + (xy 160.075 128.736116) (xy 160.075 129.488011) (xy 160.06506 129.470795) (xy 160.009205 129.41494) + (xy 159.940796 129.375444) (xy 159.864496 129.355) (xy 159.785504 129.355) (xy 159.709204 129.375444) + (xy 159.640795 129.41494) (xy 159.58494 129.470795) (xy 159.575 129.488011) (xy 159.575 128.736116) + (xy 159.547894 128.741508) (xy 159.375007 128.81312) (xy 159.374998 128.813124) (xy 159.21941 128.917087) + (xy 159.219406 128.91709) (xy 159.08709 129.049406) (xy 159.087087 129.04941) (xy 158.983124 129.204998) + (xy 158.983118 129.20501) (xy 158.911508 129.377893) (xy 158.911508 129.377895) (xy 158.875 129.56143) + (xy 154.042831 129.56143) (xy 154.933378 128.670883) (xy 160.774438 128.670883) (xy 161.175 129.071445) + (xy 161.57556 128.670884) (xy 161.57556 128.670883) (xy 161.422936 128.607665) (xy 161.25872 128.575) + (xy 161.091279 128.575) (xy 160.927064 128.607665) (xy 160.927062 128.607665) (xy 160.774438 128.670883) + (xy 154.933378 128.670883) (xy 156.062364 127.541897) (xy 156.1005 127.449828) (xy 156.1005 127.350172) + (xy 156.1005 92.844769) (xy 156.119407 92.786578) (xy 156.129496 92.774765) (xy 157.11357 91.790691) + (xy 163.3495 91.790691) (xy 163.3495 91.909309) (xy 163.358698 91.943635) (xy 163.380202 92.02389) + (xy 163.439507 92.126608) (xy 163.439509 92.12661) (xy 163.439511 92.126613) (xy 163.523387 92.210489) + (xy 163.523389 92.21049) (xy 163.523391 92.210492) (xy 163.62611 92.269797) (xy 163.626111 92.269797) + (xy 163.626114 92.269799) (xy 163.740691 92.3005) (xy 163.740693 92.3005) (xy 163.859307 92.3005) + (xy 163.859309 92.3005) (xy 163.973886 92.269799) (xy 163.973888 92.269797) (xy 163.97389 92.269797) + (xy 164.076608 92.210492) (xy 164.076608 92.210491) (xy 164.076613 92.210489) (xy 164.160489 92.126613) + (xy 164.166878 92.115547) (xy 164.219797 92.02389) (xy 164.219797 92.023888) (xy 164.219799 92.023886) + (xy 164.2505 91.909309) (xy 164.2505 91.790691) (xy 164.219799 91.676114) (xy 164.219797 91.676111) + (xy 164.219797 91.676109) (xy 164.160492 91.573391) (xy 164.16049 91.573389) (xy 164.160489 91.573387) + (xy 164.076613 91.489511) (xy 164.07661 91.489509) (xy 164.076608 91.489507) (xy 163.973889 91.430202) + (xy 163.97389 91.430202) (xy 163.960351 91.426574) (xy 163.859309 91.3995) (xy 163.740691 91.3995) + (xy 163.699348 91.410578) (xy 163.626109 91.430202) (xy 163.523391 91.489507) (xy 163.439507 91.573391) + (xy 163.380202 91.676109) (xy 163.366996 91.725395) (xy 163.3495 91.790691) (xy 157.11357 91.790691) + (xy 164.680496 84.223765) (xy 164.735013 84.195988) (xy 164.795445 84.205559) (xy 164.83871 84.248824) + (xy 164.8495 84.293769) (xy 164.8495 108.323341) (xy 164.830593 108.381532) (xy 164.781093 108.417496) + (xy 164.719907 108.417496) (xy 164.680498 108.393346) (xy 164.675863 108.388711) (xy 164.67586 108.388709) + (xy 164.675858 108.388707) (xy 164.573139 108.329402) (xy 164.57314 108.329402) (xy 164.55052 108.323341) + (xy 164.458559 108.2987) (xy 164.339941 108.2987) (xy 164.269817 108.317489) (xy 164.225359 108.329402) + (xy 164.122641 108.388707) (xy 164.038757 108.472591) (xy 163.979452 108.575309) (xy 163.979451 108.575314) + (xy 163.94875 108.689891) (xy 163.94875 108.808509) (xy 163.975009 108.906509) (xy 163.979452 108.92309) + (xy 164.038757 109.025808) (xy 164.038759 109.02581) (xy 164.038761 109.025813) (xy 164.122637 109.109689) + (xy 164.122639 109.10969) (xy 164.122641 109.109692) (xy 164.22536 109.168997) (xy 164.225361 109.168997) + (xy 164.225364 109.168999) (xy 164.339941 109.1997) (xy 164.339943 109.1997) (xy 164.458557 109.1997) + (xy 164.458559 109.1997) (xy 164.573136 109.168999) (xy 164.573138 109.168997) (xy 164.57314 109.168997) + (xy 164.675858 109.109692) (xy 164.675858 109.109691) (xy 164.675863 109.109689) (xy 164.680498 109.105053) + (xy 164.735013 109.077278) (xy 164.795445 109.086849) (xy 164.83871 109.130114) (xy 164.8495 109.175059) + (xy 164.8495 126.705231) (xy 164.830593 126.763422) (xy 164.820504 126.775234) (xy 163.583103 128.012635) + (xy 163.583103 128.012636) (xy 163.583102 128.012635) (xy 163.512635 128.083103) (xy 163.4745 128.175171) + (xy 163.4745 128.93454) (xy 163.455593 128.992731) (xy 163.44156 129.008277) (xy 163.433902 129.015137) + (xy 163.417686 129.0245) (xy 163.368076 129.074109) (xy 163.36606 129.075916) (xy 163.340445 129.087243) + (xy 163.315487 129.09996) (xy 163.31269 129.099517) (xy 163.310102 129.100662) (xy 163.282727 129.094771) + (xy 163.255055 129.090389) (xy 163.251981 129.088155) (xy 163.250286 129.087791) (xy 163.248061 129.085308) + (xy 163.229999 129.072185) (xy 163.182314 129.0245) (xy 163.182311 129.024498) (xy 163.182309 129.024496) + (xy 163.068189 128.958609) (xy 163.068191 128.958609) (xy 163.006114 128.941976) (xy 162.940892 128.9245) + (xy 162.809108 128.9245) (xy 162.743886 128.941976) (xy 162.681809 128.958609) (xy 162.56769 129.024496) + (xy 162.567689 129.024497) (xy 162.567686 129.024499) (xy 162.567686 129.0245) (xy 162.520001 129.072184) + (xy 162.465487 129.09996) (xy 162.405055 129.090389) (xy 162.379999 129.072185) (xy 162.332314 129.0245) + (xy 162.332311 129.024498) (xy 162.332309 129.024496) (xy 162.218189 128.958609) (xy 162.218191 128.958609) + (xy 162.156114 128.941976) (xy 162.090892 128.9245) (xy 161.959108 128.9245) (xy 161.893886 128.941976) + (xy 161.831809 128.958609) (xy 161.71769 129.024496) (xy 161.624496 129.11769) (xy 161.558609 129.231809) + (xy 161.546049 129.278685) (xy 161.5245 129.359108) (xy 161.5245 129.490892) (xy 161.552275 129.594552) + (xy 161.558609 129.61819) (xy 161.624496 129.732309) (xy 161.624498 129.732311) (xy 161.6245 129.732314) + (xy 161.717686 129.8255) (xy 161.717688 129.825501) (xy 161.71769 129.825503) (xy 161.83181 129.89139) + (xy 161.831808 129.89139) (xy 161.831812 129.891391) (xy 161.831814 129.891392) (xy 161.959108 129.9255) + (xy 161.95911 129.9255) (xy 162.09089 129.9255) (xy 162.090892 129.9255) (xy 162.218186 129.891392) + (xy 162.218188 129.89139) (xy 162.21819 129.89139) (xy 162.332309 129.825503) (xy 162.332309 129.825502) + (xy 162.332314 129.8255) (xy 162.379998 129.777815) (xy 162.434513 129.75004) (xy 162.494945 129.759611) + (xy 162.52 129.777814) (xy 162.567686 129.8255) (xy 162.567688 129.825501) (xy 162.56769 129.825503) + (xy 162.68181 129.89139) (xy 162.681808 129.89139) (xy 162.681812 129.891391) (xy 162.681814 129.891392) + (xy 162.809108 129.9255) (xy 162.80911 129.9255) (xy 162.94089 129.9255) (xy 162.940892 129.9255) + (xy 163.068186 129.891392) (xy 163.068188 129.89139) (xy 163.06819 129.89139) (xy 163.182309 129.825503) + (xy 163.182309 129.825502) (xy 163.182314 129.8255) (xy 163.229998 129.777815) (xy 163.284513 129.75004) + (xy 163.344945 129.759611) (xy 163.37 129.777814) (xy 163.417686 129.8255) (xy 163.417688 129.825501) + (xy 163.41769 129.825503) (xy 163.53181 129.89139) (xy 163.531808 129.89139) (xy 163.531812 129.891391) + (xy 163.531814 129.891392) (xy 163.659108 129.9255) (xy 163.65911 129.9255) (xy 163.79089 129.9255) + (xy 163.790892 129.9255) (xy 163.918186 129.891392) (xy 163.918188 129.89139) (xy 163.91819 129.89139) + (xy 164.032309 129.825503) (xy 164.032309 129.825502) (xy 164.032314 129.8255) (xy 164.079998 129.777815) + (xy 164.134513 129.75004) (xy 164.194945 129.759611) (xy 164.22 129.777814) (xy 164.267686 129.8255) + (xy 164.267688 129.825501) (xy 164.26769 129.825503) (xy 164.38181 129.89139) (xy 164.381808 129.89139) + (xy 164.381812 129.891391) (xy 164.381814 129.891392) (xy 164.509108 129.9255) (xy 164.50911 129.9255) + (xy 164.64089 129.9255) (xy 164.640892 129.9255) (xy 164.768186 129.891392) (xy 164.768188 129.89139) + (xy 164.76819 129.89139) (xy 164.882309 129.825503) (xy 164.882309 129.825502) (xy 164.882314 129.8255) + (xy 164.929998 129.777815) (xy 164.984513 129.75004) (xy 165.044945 129.759611) (xy 165.07 129.777814) + (xy 165.117686 129.8255) (xy 165.117688 129.825501) (xy 165.11769 129.825503) (xy 165.23181 129.89139) + (xy 165.231808 129.89139) (xy 165.231812 129.891391) (xy 165.231814 129.891392) (xy 165.359108 129.9255) + (xy 165.35911 129.9255) (xy 165.49089 129.9255) (xy 165.490892 129.9255) (xy 165.618186 129.891392) + (xy 165.618188 129.89139) (xy 165.61819 129.89139) (xy 165.732309 129.825503) (xy 165.732309 129.825502) + (xy 165.732314 129.8255) (xy 165.779998 129.777815) (xy 165.791596 129.771906) (xy 165.800284 129.762209) + (xy 165.818192 129.758355) (xy 165.834513 129.75004) (xy 165.847372 129.752076) (xy 165.8601 129.749338) + (xy 165.875096 129.756467) (xy 165.894945 129.759611) (xy 165.916058 129.774083) (xy 165.918084 129.775898) + (xy 165.967686 129.8255) (xy 165.983904 129.834863) (xy 165.991558 129.84172) (xy 166.002009 129.859718) + (xy 166.015939 129.875187) (xy 166.018795 129.888623) (xy 166.022284 129.894631) (xy 166.021564 129.901648) + (xy 166.0245 129.915458) (xy 166.0245 130.28454) (xy 166.005593 130.342731) (xy 165.975003 130.370275) + (xy 165.967688 130.374498) (xy 165.967686 130.374499) (xy 165.967686 130.3745) (xy 165.920001 130.422184) + (xy 165.865487 130.44996) (xy 165.805055 130.440389) (xy 165.779999 130.422185) (xy 165.732314 130.3745) + (xy 165.732311 130.374498) (xy 165.732309 130.374496) (xy 165.618189 130.308609) (xy 165.618191 130.308609) + (xy 165.556114 130.291976) (xy 165.490892 130.2745) (xy 165.359108 130.2745) (xy 165.293886 130.291976) + (xy 165.231809 130.308609) (xy 165.11769 130.374496) (xy 165.117689 130.374497) (xy 165.117686 130.374499) + (xy 165.117686 130.3745) (xy 165.070001 130.422184) (xy 165.015487 130.44996) (xy 164.955055 130.440389) + (xy 164.929999 130.422185) (xy 164.882314 130.3745) (xy 164.882311 130.374498) (xy 164.882309 130.374496) + (xy 164.768189 130.308609) (xy 164.768191 130.308609) (xy 164.706114 130.291976) (xy 164.640892 130.2745) + (xy 164.509108 130.2745) (xy 164.443886 130.291976) (xy 164.381809 130.308609) (xy 164.26769 130.374496) + (xy 164.267689 130.374497) (xy 164.267686 130.374499) (xy 164.267686 130.3745) (xy 164.220001 130.422184) + (xy 164.165487 130.44996) (xy 164.105055 130.440389) (xy 164.079999 130.422185) (xy 164.032314 130.3745) + (xy 164.032311 130.374498) (xy 164.032309 130.374496) (xy 163.918189 130.308609) (xy 163.918191 130.308609) + (xy 163.856114 130.291976) (xy 163.790892 130.2745) (xy 163.659108 130.2745) (xy 163.593886 130.291976) + (xy 163.531809 130.308609) (xy 163.41769 130.374496) (xy 163.417689 130.374497) (xy 163.417686 130.374499) + (xy 163.417686 130.3745) (xy 163.370001 130.422184) (xy 163.315487 130.44996) (xy 163.255055 130.440389) + (xy 163.229999 130.422185) (xy 163.182314 130.3745) (xy 163.182311 130.374498) (xy 163.182309 130.374496) + (xy 163.068189 130.308609) (xy 163.068191 130.308609) (xy 163.006114 130.291976) (xy 162.940892 130.2745) + (xy 162.809108 130.2745) (xy 162.743886 130.291976) (xy 162.681809 130.308609) (xy 162.56769 130.374496) + (xy 162.567689 130.374497) (xy 162.567686 130.374499) (xy 162.567686 130.3745) (xy 162.520001 130.422184) + (xy 162.465487 130.44996) (xy 162.405055 130.440389) (xy 162.379999 130.422185) (xy 162.332314 130.3745) + (xy 162.332311 130.374498) (xy 162.332309 130.374496) (xy 162.218189 130.308609) (xy 162.218191 130.308609) + (xy 162.156114 130.291976) (xy 162.090892 130.2745) (xy 161.959108 130.2745) (xy 161.893886 130.291976) + (xy 161.831809 130.308609) (xy 161.71769 130.374496) (xy 161.624496 130.46769) (xy 161.558609 130.581809) + (xy 161.558608 130.581814) (xy 161.5245 130.709108) (xy 161.5245 130.840892) (xy 161.552275 130.944552) + (xy 161.558609 130.96819) (xy 161.624496 131.082309) (xy 161.624498 131.082311) (xy 161.6245 131.082314) + (xy 161.717686 131.1755) (xy 161.717688 131.175501) (xy 161.71769 131.175503) (xy 161.83181 131.24139) + (xy 161.831808 131.24139) (xy 161.831812 131.241391) (xy 161.831814 131.241392) (xy 161.959108 131.2755) + (xy 161.95911 131.2755) (xy 162.09089 131.2755) (xy 162.090892 131.2755) (xy 162.218186 131.241392) + (xy 162.218188 131.24139) (xy 162.21819 131.24139) (xy 162.332309 131.175503) (xy 162.332309 131.175502) + (xy 162.332314 131.1755) (xy 162.379998 131.127815) (xy 162.434513 131.10004) (xy 162.494945 131.109611) + (xy 162.52 131.127814) (xy 162.567686 131.1755) (xy 162.567688 131.175501) (xy 162.56769 131.175503) + (xy 162.68181 131.24139) (xy 162.681808 131.24139) (xy 162.681812 131.241391) (xy 162.681814 131.241392) + (xy 162.809108 131.2755) (xy 162.80911 131.2755) (xy 162.94089 131.2755) (xy 162.940892 131.2755) + (xy 163.068186 131.241392) (xy 163.068188 131.24139) (xy 163.06819 131.24139) (xy 163.182309 131.175503) + (xy 163.182309 131.175502) (xy 163.182314 131.1755) (xy 163.229998 131.127815) (xy 163.284513 131.10004) + (xy 163.344945 131.109611) (xy 163.37 131.127814) (xy 163.417686 131.1755) (xy 163.417688 131.175501) + (xy 163.41769 131.175503) (xy 163.53181 131.24139) (xy 163.531808 131.24139) (xy 163.531812 131.241391) + (xy 163.531814 131.241392) (xy 163.659108 131.2755) (xy 163.65911 131.2755) (xy 163.79089 131.2755) + (xy 163.790892 131.2755) (xy 163.918186 131.241392) (xy 163.918188 131.24139) (xy 163.91819 131.24139) + (xy 164.032309 131.175503) (xy 164.032309 131.175502) (xy 164.032314 131.1755) (xy 164.079998 131.127815) + (xy 164.134513 131.10004) (xy 164.194945 131.109611) (xy 164.22 131.127814) (xy 164.267686 131.1755) + (xy 164.267688 131.175501) (xy 164.26769 131.175503) (xy 164.38181 131.24139) (xy 164.381808 131.24139) + (xy 164.381812 131.241391) (xy 164.381814 131.241392) (xy 164.509108 131.2755) (xy 164.50911 131.2755) + (xy 164.64089 131.2755) (xy 164.640892 131.2755) (xy 164.768186 131.241392) (xy 164.768188 131.24139) + (xy 164.76819 131.24139) (xy 164.882309 131.175503) (xy 164.882309 131.175502) (xy 164.882314 131.1755) + (xy 164.929998 131.127815) (xy 164.941596 131.121906) (xy 164.950284 131.112209) (xy 164.968192 131.108355) + (xy 164.984513 131.10004) (xy 164.997372 131.102076) (xy 165.0101 131.099338) (xy 165.025096 131.106467) + (xy 165.044945 131.109611) (xy 165.066058 131.124083) (xy 165.068084 131.125898) (xy 165.117686 131.1755) + (xy 165.133904 131.184863) (xy 165.141558 131.19172) (xy 165.152009 131.209718) (xy 165.165939 131.225187) + (xy 165.168795 131.238623) (xy 165.172284 131.244631) (xy 165.171564 131.251648) (xy 165.1745 131.265458) + (xy 165.1745 133.374828) (xy 165.212634 133.466894) (xy 165.212635 133.466895) (xy 165.212636 133.466897) + (xy 168.087636 136.341897) (xy 168.087635 136.341897) (xy 168.158103 136.412364) (xy 168.250171 136.4505) + (xy 168.250172 136.4505) (xy 168.349829 136.4505) (xy 168.407885 136.426451) (xy 168.441897 136.412364) + (xy 170.462364 134.391897) (xy 170.5005 134.299828) (xy 170.5005 134.200173) (xy 170.5005 132.741578) + (xy 171.24115 132.741578) (xy 171.24115 134.904621) (xy 171.241151 134.904623) (xy 171.256002 134.998399) + (xy 171.256004 134.998404) (xy 171.3136 135.111442) (xy 171.403308 135.20115) (xy 171.516346 135.258746) + (xy 171.610131 135.2736) (xy 173.773168 135.273599) (xy 173.773171 135.273599) (xy 173.773172 135.273598) + (xy 173.820061 135.266172) (xy 173.866949 135.258747) (xy 173.866949 135.258746) (xy 173.866954 135.258746) + (xy 173.979992 135.20115) (xy 174.0697 135.111442) (xy 174.127296 134.998404) (xy 174.14215 134.904619) + (xy 174.142149 133.705121) (xy 175.89165 133.705121) (xy 175.89165 133.941078) (xy 175.922448 134.175008) (xy 175.922448 134.175013) (xy 175.983517 134.402924) (xy 175.983521 134.402937) (xy 176.073813 134.620924) (xy 176.073815 134.620929) (xy 176.191792 134.825269) (xy 176.25437 134.906824) (xy 177.090607 134.070586) (xy 177.115628 134.13099) (xy 177.186762 134.237451) (xy 177.277299 134.327988) (xy 177.38376 134.399122) @@ -47418,27 +54872,30 @@ (xy 178.196538 134.237451) (xy 178.267672 134.13099) (xy 178.292691 134.070587) (xy 179.128928 134.906824) (xy 179.19151 134.825265) (xy 179.309484 134.620929) (xy 179.309486 134.620924) (xy 179.399778 134.402937) (xy 179.399782 134.402924) (xy 179.460851 134.175013) (xy 179.460851 134.175008) (xy 179.491649 133.941078) - (xy 179.49165 133.941077) (xy 179.49165 133.705123) (xy 179.491649 133.70512) (xy 179.490598 133.697134) - (xy 181.09115 133.697134) (xy 181.09115 133.949065) (xy 181.130558 134.19788) (xy 181.208409 134.437479) - (xy 181.301878 134.620924) (xy 181.32278 134.661945) (xy 181.470857 134.865756) (xy 181.648994 135.043893) - (xy 181.852805 135.19197) (xy 182.077271 135.306341) (xy 182.316865 135.38419) (xy 182.316866 135.38419) - (xy 182.316869 135.384191) (xy 182.565685 135.4236) (xy 182.565688 135.4236) (xy 182.817615 135.4236) - (xy 183.06643 135.384191) (xy 183.066431 135.38419) (xy 183.066435 135.38419) (xy 183.306029 135.306341) - (xy 183.530495 135.19197) (xy 183.734306 135.043893) (xy 183.912443 134.865756) (xy 184.06052 134.661945) - (xy 184.174891 134.437479) (xy 184.25274 134.197885) (xy 184.256363 134.175013) (xy 184.29215 133.949065) - (xy 184.29215 133.697134) (xy 186.09115 133.697134) (xy 186.09115 133.949065) (xy 186.130558 134.19788) - (xy 186.208409 134.437479) (xy 186.301878 134.620924) (xy 186.32278 134.661945) (xy 186.470857 134.865756) - (xy 186.648994 135.043893) (xy 186.852805 135.19197) (xy 187.077271 135.306341) (xy 187.316865 135.38419) - (xy 187.316866 135.38419) (xy 187.316869 135.384191) (xy 187.565685 135.4236) (xy 187.565688 135.4236) - (xy 187.817615 135.4236) (xy 188.06643 135.384191) (xy 188.066431 135.38419) (xy 188.066435 135.38419) - (xy 188.306029 135.306341) (xy 188.530495 135.19197) (xy 188.734306 135.043893) (xy 188.912443 134.865756) - (xy 189.06052 134.661945) (xy 189.174891 134.437479) (xy 189.25274 134.197885) (xy 189.256363 134.175013) - (xy 189.29215 133.949065) (xy 189.29215 133.697134) (xy 191.09115 133.697134) (xy 191.09115 133.949065) - (xy 191.130558 134.19788) (xy 191.208409 134.437479) (xy 191.301878 134.620924) (xy 191.32278 134.661945) - (xy 191.470857 134.865756) (xy 191.648994 135.043893) (xy 191.852805 135.19197) (xy 192.077271 135.306341) - (xy 192.316865 135.38419) (xy 192.316866 135.38419) (xy 192.316869 135.384191) (xy 192.565685 135.4236) - (xy 192.565688 135.4236) (xy 192.817615 135.4236) (xy 193.06643 135.384191) (xy 193.066431 135.38419) - (xy 193.066435 135.38419) (xy 193.306029 135.306341) (xy 193.511183 135.20181) (xy 209.34115 135.20181) + (xy 179.49165 133.941077) (xy 179.49165 133.708939) (xy 181.24115 133.708939) (xy 181.24115 133.93726) + (xy 181.276864 134.162755) (xy 181.347419 134.379899) (xy 181.45107 134.583327) (xy 181.451074 134.583333) + (xy 181.585266 134.768031) (xy 181.585268 134.768033) (xy 181.585271 134.768037) (xy 181.746713 134.929479) + (xy 181.746716 134.929481) (xy 181.746718 134.929483) (xy 181.790528 134.961313) (xy 181.931422 135.063679) + (xy 182.134851 135.167331) (xy 182.35199 135.237884) (xy 182.351991 135.237884) (xy 182.351994 135.237885) + (xy 182.57749 135.2736) (xy 182.577493 135.2736) (xy 182.80581 135.2736) (xy 183.031305 135.237885) + (xy 183.031306 135.237884) (xy 183.03131 135.237884) (xy 183.248449 135.167331) (xy 183.451878 135.063679) + (xy 183.636587 134.929479) (xy 183.798029 134.768037) (xy 183.932229 134.583328) (xy 184.035881 134.379899) + (xy 184.106434 134.16276) (xy 184.126669 134.035) (xy 184.14215 133.93726) (xy 184.14215 133.708939) + (xy 186.24115 133.708939) (xy 186.24115 133.93726) (xy 186.276864 134.162755) (xy 186.347419 134.379899) + (xy 186.45107 134.583327) (xy 186.451074 134.583333) (xy 186.585266 134.768031) (xy 186.585268 134.768033) + (xy 186.585271 134.768037) (xy 186.746713 134.929479) (xy 186.746716 134.929481) (xy 186.746718 134.929483) + (xy 186.790528 134.961313) (xy 186.931422 135.063679) (xy 187.134851 135.167331) (xy 187.35199 135.237884) + (xy 187.351991 135.237884) (xy 187.351994 135.237885) (xy 187.57749 135.2736) (xy 187.577493 135.2736) + (xy 187.80581 135.2736) (xy 188.031305 135.237885) (xy 188.031306 135.237884) (xy 188.03131 135.237884) + (xy 188.248449 135.167331) (xy 188.451878 135.063679) (xy 188.636587 134.929479) (xy 188.798029 134.768037) + (xy 188.932229 134.583328) (xy 189.035881 134.379899) (xy 189.106434 134.16276) (xy 189.126669 134.035) + (xy 189.14215 133.93726) (xy 189.14215 133.708939) (xy 191.24115 133.708939) (xy 191.24115 133.93726) + (xy 191.276864 134.162755) (xy 191.347419 134.379899) (xy 191.45107 134.583327) (xy 191.451074 134.583333) + (xy 191.585266 134.768031) (xy 191.585268 134.768033) (xy 191.585271 134.768037) (xy 191.746713 134.929479) + (xy 191.746716 134.929481) (xy 191.746718 134.929483) (xy 191.790528 134.961313) (xy 191.931422 135.063679) + (xy 192.134851 135.167331) (xy 192.35199 135.237884) (xy 192.351991 135.237884) (xy 192.351994 135.237885) + (xy 192.57749 135.2736) (xy 192.577493 135.2736) (xy 192.80581 135.2736) (xy 193.031305 135.237885) + (xy 193.031306 135.237884) (xy 193.03131 135.237884) (xy 193.142334 135.20181) (xy 209.34115 135.20181) (xy 209.34115 135.444389) (xy 209.372811 135.684881) (xy 209.372811 135.684886) (xy 209.435594 135.919192) (xy 209.435598 135.919205) (xy 209.528422 136.143304) (xy 209.528424 136.143308) (xy 209.528426 136.143312) (xy 209.632227 136.3231) (xy 209.649716 136.353392) (xy 209.797379 136.545831) (xy 209.797381 136.545833) @@ -47450,128 +54907,883 @@ (xy 212.854874 136.143312) (xy 212.947704 135.9192) (xy 213.010488 135.684889) (xy 213.04215 135.444388) (xy 213.04215 135.201812) (xy 213.010488 134.961311) (xy 212.947704 134.727) (xy 212.854874 134.502888) (xy 212.733586 134.292811) (xy 212.585915 134.100362) (xy 212.414388 133.928835) (xy 212.414383 133.928831) - (xy 212.414381 133.928829) (xy 212.221942 133.781166) (xy 212.18369 133.759081) (xy 212.011862 133.659876) + (xy 212.414381 133.928829) (xy 212.221942 133.781166) (xy 212.19349 133.764739) (xy 212.011862 133.659876) (xy 212.011858 133.659874) (xy 212.011854 133.659872) (xy 211.787755 133.567048) (xy 211.787754 133.567047) (xy 211.78775 133.567046) (xy 211.553439 133.504262) (xy 211.553436 133.504261) (xy 211.553434 133.504261) (xy 211.312939 133.4726) (xy 211.312938 133.4726) (xy 211.070362 133.4726) (xy 211.07036 133.4726) (xy 210.829868 133.504261) (xy 210.829863 133.504261) (xy 210.595557 133.567044) (xy 210.595544 133.567048) (xy 210.371445 133.659872) (xy 210.161357 133.781166) (xy 209.968918 133.928829) (xy 209.797379 134.100368) (xy 209.649716 134.292807) (xy 209.528422 134.502895) (xy 209.435598 134.726994) (xy 209.435594 134.727007) - (xy 209.372811 134.961313) (xy 209.372811 134.961318) (xy 209.34115 135.20181) (xy 193.511183 135.20181) - (xy 193.530495 135.19197) (xy 193.734306 135.043893) (xy 193.912443 134.865756) (xy 194.06052 134.661945) - (xy 194.174891 134.437479) (xy 194.25274 134.197885) (xy 194.256363 134.175013) (xy 194.29215 133.949065) - (xy 194.29215 133.697134) (xy 194.252741 133.448319) (xy 194.187475 133.247451) (xy 194.186114 133.243262) - (xy 194.178797 133.220744) (xy 197.89115 133.220744) (xy 197.89115 133.425455) (xy 197.923171 133.627629) - (xy 197.98643 133.822319) (xy 198.079362 134.004709) (xy 198.079364 134.004713) (xy 198.199679 134.170313) - (xy 198.199681 134.170315) (xy 198.199684 134.170319) (xy 198.344431 134.315066) (xy 198.344434 134.315068) - (xy 198.344436 134.31507) (xy 198.510036 134.435385) (xy 198.51004 134.435387) (xy 198.692431 134.52832) - (xy 198.887116 134.591577) (xy 198.887117 134.591577) (xy 198.88712 134.591578) (xy 199.089295 134.6236) - (xy 199.089298 134.6236) (xy 199.294005 134.6236) (xy 199.496179 134.591578) (xy 199.49618 134.591577) - (xy 199.496184 134.591577) (xy 199.690869 134.52832) (xy 199.87326 134.435387) (xy 200.038869 134.315066) - (xy 200.183616 134.170319) (xy 200.26383 134.059913) (xy 200.303935 134.004713) (xy 200.303937 134.00471) - (xy 200.39687 133.822319) (xy 200.460127 133.627634) (xy 200.469723 133.567048) (xy 200.49215 133.425455) - (xy 200.49215 133.220744) (xy 204.39115 133.220744) (xy 204.39115 133.425455) (xy 204.423171 133.627629) - (xy 204.48643 133.822319) (xy 204.579362 134.004709) (xy 204.579364 134.004713) (xy 204.699679 134.170313) - (xy 204.699681 134.170315) (xy 204.699684 134.170319) (xy 204.844431 134.315066) (xy 204.844434 134.315068) - (xy 204.844436 134.31507) (xy 205.010036 134.435385) (xy 205.01004 134.435387) (xy 205.192431 134.52832) - (xy 205.387116 134.591577) (xy 205.387117 134.591577) (xy 205.38712 134.591578) (xy 205.589295 134.6236) - (xy 205.589298 134.6236) (xy 205.794005 134.6236) (xy 205.996179 134.591578) (xy 205.99618 134.591577) - (xy 205.996184 134.591577) (xy 206.190869 134.52832) (xy 206.37326 134.435387) (xy 206.538869 134.315066) - (xy 206.683616 134.170319) (xy 206.76383 134.059913) (xy 206.803935 134.004713) (xy 206.803937 134.00471) - (xy 206.89687 133.822319) (xy 206.960127 133.627634) (xy 206.969723 133.567048) (xy 206.99215 133.425455) - (xy 206.99215 133.220744) (xy 206.960128 133.01857) (xy 206.948979 132.984257) (xy 206.89687 132.823881) - (xy 206.803937 132.64149) (xy 206.803935 132.641486) (xy 206.68362 132.475886) (xy 206.683618 132.475884) - (xy 206.683616 132.475881) (xy 206.538869 132.331134) (xy 206.538865 132.331131) (xy 206.538863 132.331129) - (xy 206.373263 132.210814) (xy 206.373259 132.210812) (xy 206.190869 132.11788) (xy 205.996179 132.054621) - (xy 205.794005 132.0226) (xy 205.794002 132.0226) (xy 205.589298 132.0226) (xy 205.589295 132.0226) - (xy 205.38712 132.054621) (xy 205.19243 132.11788) (xy 205.01004 132.210812) (xy 205.010036 132.210814) - (xy 204.844436 132.331129) (xy 204.699679 132.475886) (xy 204.579364 132.641486) (xy 204.579362 132.64149) - (xy 204.48643 132.82388) (xy 204.423171 133.01857) (xy 204.39115 133.220744) (xy 200.49215 133.220744) - (xy 200.460128 133.01857) (xy 200.448979 132.984257) (xy 200.39687 132.823881) (xy 200.303937 132.64149) - (xy 200.303935 132.641486) (xy 200.18362 132.475886) (xy 200.183618 132.475884) (xy 200.183616 132.475881) - (xy 200.038869 132.331134) (xy 200.038865 132.331131) (xy 200.038863 132.331129) (xy 199.873263 132.210814) - (xy 199.873259 132.210812) (xy 199.690869 132.11788) (xy 199.496179 132.054621) (xy 199.294005 132.0226) - (xy 199.294002 132.0226) (xy 199.089298 132.0226) (xy 199.089295 132.0226) (xy 198.88712 132.054621) - (xy 198.69243 132.11788) (xy 198.51004 132.210812) (xy 198.510036 132.210814) (xy 198.344436 132.331129) - (xy 198.199679 132.475886) (xy 198.079364 132.641486) (xy 198.079362 132.64149) (xy 197.98643 132.82388) - (xy 197.923171 133.01857) (xy 197.89115 133.220744) (xy 194.178797 133.220744) (xy 194.174891 133.208721) - (xy 194.06052 132.984255) (xy 193.912443 132.780444) (xy 193.734306 132.602307) (xy 193.530495 132.45423) - (xy 193.530494 132.454229) (xy 193.530492 132.454228) (xy 193.306029 132.339859) (xy 193.06643 132.262008) - (xy 192.817615 132.2226) (xy 192.817612 132.2226) (xy 192.565688 132.2226) (xy 192.565685 132.2226) - (xy 192.316869 132.262008) (xy 192.07727 132.339859) (xy 191.852807 132.454228) (xy 191.648995 132.602306) - (xy 191.470856 132.780445) (xy 191.322778 132.984257) (xy 191.208409 133.20872) (xy 191.130558 133.448319) - (xy 191.09115 133.697134) (xy 189.29215 133.697134) (xy 189.252741 133.448319) (xy 189.239884 133.408749) - (xy 189.174891 133.208721) (xy 189.06052 132.984255) (xy 188.912443 132.780444) (xy 188.734306 132.602307) - (xy 188.530495 132.45423) (xy 188.530494 132.454229) (xy 188.530492 132.454228) (xy 188.306029 132.339859) - (xy 188.06643 132.262008) (xy 187.817615 132.2226) (xy 187.817612 132.2226) (xy 187.565688 132.2226) - (xy 187.565685 132.2226) (xy 187.316869 132.262008) (xy 187.07727 132.339859) (xy 186.852807 132.454228) - (xy 186.648995 132.602306) (xy 186.470856 132.780445) (xy 186.322778 132.984257) (xy 186.208409 133.20872) - (xy 186.130558 133.448319) (xy 186.09115 133.697134) (xy 184.29215 133.697134) (xy 184.252741 133.448319) - (xy 184.239884 133.408749) (xy 184.174891 133.208721) (xy 184.06052 132.984255) (xy 183.912443 132.780444) - (xy 183.734306 132.602307) (xy 183.530495 132.45423) (xy 183.530494 132.454229) (xy 183.530492 132.454228) - (xy 183.306029 132.339859) (xy 183.06643 132.262008) (xy 182.817615 132.2226) (xy 182.817612 132.2226) - (xy 182.565688 132.2226) (xy 182.565685 132.2226) (xy 182.316869 132.262008) (xy 182.07727 132.339859) - (xy 181.852807 132.454228) (xy 181.648995 132.602306) (xy 181.470856 132.780445) (xy 181.322778 132.984257) - (xy 181.208409 133.20872) (xy 181.130558 133.448319) (xy 181.09115 133.697134) (xy 179.490598 133.697134) - (xy 179.460851 133.471191) (xy 179.460851 133.471186) (xy 179.399782 133.243275) (xy 179.399778 133.243262) - (xy 179.309486 133.025275) (xy 179.309484 133.02527) (xy 179.191507 132.82093) (xy 179.128928 132.739374) - (xy 178.292691 133.57561) (xy 178.267672 133.51521) (xy 178.196538 133.408749) (xy 178.106001 133.318212) - (xy 177.99954 133.247078) (xy 177.939136 133.222057) (xy 178.775374 132.38582) (xy 178.775375 132.38582) - (xy 178.693819 132.323242) (xy 178.489479 132.205265) (xy 178.489474 132.205263) (xy 178.271487 132.114971) - (xy 178.271474 132.114967) (xy 178.043561 132.053898) (xy 177.809628 132.0231) (xy 177.573671 132.0231) - (xy 177.339741 132.053898) (xy 177.339736 132.053898) (xy 177.111825 132.114967) (xy 177.111812 132.114971) - (xy 176.893825 132.205263) (xy 176.89382 132.205265) (xy 176.689481 132.323241) (xy 176.607924 132.38582) - (xy 177.444162 133.222058) (xy 177.38376 133.247078) (xy 177.277299 133.318212) (xy 177.186762 133.408749) - (xy 177.115628 133.51521) (xy 177.090608 133.575612) (xy 176.25437 132.739374) (xy 176.191791 132.820931) - (xy 176.073815 133.02527) (xy 176.073813 133.025275) (xy 175.983521 133.243262) (xy 175.983517 133.243275) - (xy 175.922448 133.471186) (xy 175.922448 133.471191) (xy 175.89165 133.705121) (xy 174.29215 133.705121) - (xy 174.29215 132.729998) (xy 174.281527 132.641536) (xy 174.226011 132.500758) (xy 174.134572 132.380178) - (xy 174.013992 132.288739) (xy 174.013991 132.288738) (xy 174.013989 132.288737) (xy 173.873215 132.233223) - (xy 173.784756 132.2226) (xy 173.784752 132.2226) (xy 171.598548 132.2226) (xy 171.598543 132.2226) - (xy 171.510084 132.233223) (xy 171.36931 132.288737) (xy 171.369306 132.28874) (xy 171.248731 132.380175) - (xy 171.248725 132.380181) (xy 171.15729 132.500756) (xy 171.157287 132.50076) (xy 171.101773 132.641534) - (xy 171.09115 132.729993) (xy 80.854823 132.729993) (xy 80.854429 132.339859) (xy 80.852728 130.656501) - (xy 80.850789 128.73823) (xy 114.15115 128.73823) (xy 114.15115 130.42796) (xy 114.151151 130.427963) - (xy 114.154064 130.45309) (xy 114.179406 130.510485) (xy 114.199444 130.555865) (xy 114.278885 130.635306) - (xy 114.381659 130.680685) (xy 114.406785 130.6836) (xy 116.096514 130.683599) (xy 116.121641 130.680685) - (xy 116.224415 130.635306) (xy 116.303856 130.555865) (xy 116.349235 130.453091) (xy 116.35215 130.427965) - (xy 116.352149 129.496485) (xy 116.69115 129.496485) (xy 116.69115 129.669714) (xy 116.718247 129.840802) - (xy 116.718248 129.840806) (xy 116.771773 130.005538) (xy 116.771775 130.005541) (xy 116.833763 130.127202) - (xy 116.850418 130.159888) (xy 116.952236 130.300028) (xy 117.074722 130.422514) (xy 117.214862 130.524332) - (xy 117.369205 130.602973) (xy 117.369207 130.602973) (xy 117.369208 130.602974) (xy 117.369211 130.602976) - (xy 117.533943 130.656501) (xy 117.533947 130.656502) (xy 117.705036 130.6836) (xy 117.705039 130.6836) - (xy 117.878264 130.6836) (xy 118.049352 130.656502) (xy 118.049356 130.656501) (xy 118.214088 130.602976) - (xy 118.21409 130.602974) (xy 118.214095 130.602973) (xy 118.368438 130.524332) (xy 118.508578 130.422514) - (xy 118.631064 130.300028) (xy 118.732882 130.159888) (xy 118.811523 130.005545) (xy 118.811524 130.00554) - (xy 118.811526 130.005538) (xy 118.865051 129.840806) (xy 118.865052 129.840802) (xy 118.89215 129.669714) - (xy 118.89215 129.496485) (xy 119.23115 129.496485) (xy 119.23115 129.669714) (xy 119.258247 129.840802) - (xy 119.258248 129.840806) (xy 119.311773 130.005538) (xy 119.311775 130.005541) (xy 119.373763 130.127202) - (xy 119.390418 130.159888) (xy 119.492236 130.300028) (xy 119.614722 130.422514) (xy 119.754862 130.524332) - (xy 119.909205 130.602973) (xy 119.909207 130.602973) (xy 119.909208 130.602974) (xy 119.909211 130.602976) - (xy 120.073943 130.656501) (xy 120.073947 130.656502) (xy 120.245036 130.6836) (xy 120.245039 130.6836) - (xy 120.418264 130.6836) (xy 120.589352 130.656502) (xy 120.589356 130.656501) (xy 120.754088 130.602976) - (xy 120.75409 130.602974) (xy 120.754095 130.602973) (xy 120.908438 130.524332) (xy 121.048578 130.422514) - (xy 121.171064 130.300028) (xy 121.272882 130.159888) (xy 121.351523 130.005545) (xy 121.351524 130.00554) - (xy 121.351526 130.005538) (xy 121.405051 129.840806) (xy 121.405052 129.840802) (xy 121.43215 129.669714) - (xy 121.43215 129.496485) (xy 121.77115 129.496485) (xy 121.77115 129.669714) (xy 121.798247 129.840802) - (xy 121.798248 129.840806) (xy 121.851773 130.005538) (xy 121.851775 130.005541) (xy 121.913763 130.127202) - (xy 121.930418 130.159888) (xy 122.032236 130.300028) (xy 122.154722 130.422514) (xy 122.294862 130.524332) - (xy 122.449205 130.602973) (xy 122.449207 130.602973) (xy 122.449208 130.602974) (xy 122.449211 130.602976) - (xy 122.613943 130.656501) (xy 122.613947 130.656502) (xy 122.785036 130.6836) (xy 122.785039 130.6836) - (xy 122.958264 130.6836) (xy 123.129352 130.656502) (xy 123.129356 130.656501) (xy 123.294088 130.602976) - (xy 123.29409 130.602974) (xy 123.294095 130.602973) (xy 123.448438 130.524332) (xy 123.588578 130.422514) - (xy 123.711064 130.300028) (xy 123.812882 130.159888) (xy 123.891523 130.005545) (xy 123.891524 130.00554) - (xy 123.891526 130.005538) (xy 123.945051 129.840806) (xy 123.945052 129.840802) (xy 123.97215 129.669714) - (xy 123.97215 129.496485) (xy 124.31115 129.496485) (xy 124.31115 129.669714) (xy 124.338247 129.840802) - (xy 124.338248 129.840806) (xy 124.391773 130.005538) (xy 124.391775 130.005541) (xy 124.453763 130.127202) - (xy 124.470418 130.159888) (xy 124.572236 130.300028) (xy 124.694722 130.422514) (xy 124.834862 130.524332) - (xy 124.989205 130.602973) (xy 124.989207 130.602973) (xy 124.989208 130.602974) (xy 124.989211 130.602976) - (xy 125.153943 130.656501) (xy 125.153947 130.656502) (xy 125.325036 130.6836) (xy 125.325039 130.6836) - (xy 125.498264 130.6836) (xy 125.669352 130.656502) (xy 125.669356 130.656501) (xy 125.834088 130.602976) - (xy 125.83409 130.602974) (xy 125.834095 130.602973) (xy 125.988438 130.524332) (xy 126.128578 130.422514) - (xy 126.251064 130.300028) (xy 126.352882 130.159888) (xy 126.431523 130.005545) (xy 126.485052 129.840801) - (xy 126.485052 129.840798) (xy 126.486171 129.837356) (xy 126.522135 129.787856) (xy 126.580326 129.768949) - (xy 126.638517 129.787856) (xy 126.674481 129.837356) (xy 126.678107 129.852461) (xy 126.683659 129.887513) + (xy 209.372811 134.961313) (xy 209.372811 134.961318) (xy 209.34115 135.20181) (xy 193.142334 135.20181) + (xy 193.248449 135.167331) (xy 193.451878 135.063679) (xy 193.636587 134.929479) (xy 193.798029 134.768037) + (xy 193.932229 134.583328) (xy 194.035881 134.379899) (xy 194.106434 134.16276) (xy 194.126669 134.035) + (xy 194.14215 133.93726) (xy 194.14215 133.708939) (xy 194.106435 133.483444) (xy 194.082165 133.408749) + (xy 194.035881 133.266301) (xy 194.018684 133.23255) (xy 198.04115 133.23255) (xy 198.04115 133.413649) + (xy 198.069478 133.592506) (xy 198.125438 133.764737) (xy 198.206976 133.924765) (xy 198.207654 133.926094) + (xy 198.314097 134.072601) (xy 198.442149 134.200653) (xy 198.588656 134.307096) (xy 198.750011 134.389311) + (xy 198.922241 134.445271) (xy 198.993786 134.456602) (xy 199.101101 134.4736) (xy 199.101104 134.4736) + (xy 199.282199 134.4736) (xy 199.371627 134.459435) (xy 199.461059 134.445271) (xy 199.633289 134.389311) + (xy 199.794644 134.307096) (xy 199.941151 134.200653) (xy 200.069203 134.072601) (xy 200.175646 133.926094) + (xy 200.257861 133.764739) (xy 200.313821 133.592509) (xy 200.333716 133.466897) (xy 200.34215 133.413649) + (xy 200.34215 133.23255) (xy 204.54115 133.23255) (xy 204.54115 133.413649) (xy 204.569478 133.592506) + (xy 204.625438 133.764737) (xy 204.706976 133.924765) (xy 204.707654 133.926094) (xy 204.814097 134.072601) + (xy 204.942149 134.200653) (xy 205.088656 134.307096) (xy 205.250011 134.389311) (xy 205.422241 134.445271) + (xy 205.493786 134.456602) (xy 205.601101 134.4736) (xy 205.601104 134.4736) (xy 205.782199 134.4736) + (xy 205.871627 134.459435) (xy 205.961059 134.445271) (xy 206.133289 134.389311) (xy 206.294644 134.307096) + (xy 206.441151 134.200653) (xy 206.569203 134.072601) (xy 206.675646 133.926094) (xy 206.757861 133.764739) + (xy 206.813821 133.592509) (xy 206.833716 133.466897) (xy 206.84215 133.413649) (xy 206.84215 133.23255) + (xy 206.813821 133.053693) (xy 206.813821 133.053691) (xy 206.757861 132.881461) (xy 206.675646 132.720106) + (xy 206.569203 132.573599) (xy 206.441151 132.445547) (xy 206.294644 132.339104) (xy 206.294643 132.339103) + (xy 206.294641 132.339102) (xy 206.133287 132.256888) (xy 205.961056 132.200928) (xy 205.782199 132.1726) + (xy 205.782196 132.1726) (xy 205.601104 132.1726) (xy 205.601101 132.1726) (xy 205.422243 132.200928) + (xy 205.250012 132.256888) (xy 205.088658 132.339102) (xy 205.042552 132.3726) (xy 204.942149 132.445547) + (xy 204.814097 132.573599) (xy 204.807616 132.58252) (xy 204.707652 132.720108) (xy 204.625438 132.881462) + (xy 204.569478 133.053693) (xy 204.54115 133.23255) (xy 200.34215 133.23255) (xy 200.313821 133.053693) + (xy 200.313821 133.053691) (xy 200.257861 132.881461) (xy 200.175646 132.720106) (xy 200.069203 132.573599) + (xy 199.941151 132.445547) (xy 199.794644 132.339104) (xy 199.794643 132.339103) (xy 199.794641 132.339102) + (xy 199.633287 132.256888) (xy 199.461056 132.200928) (xy 199.282199 132.1726) (xy 199.282196 132.1726) + (xy 199.101104 132.1726) (xy 199.101101 132.1726) (xy 198.922243 132.200928) (xy 198.750012 132.256888) + (xy 198.588658 132.339102) (xy 198.542552 132.3726) (xy 198.442149 132.445547) (xy 198.314097 132.573599) + (xy 198.307616 132.58252) (xy 198.207652 132.720108) (xy 198.125438 132.881462) (xy 198.069478 133.053693) + (xy 198.04115 133.23255) (xy 194.018684 133.23255) (xy 193.932229 133.062872) (xy 193.904913 133.025275) + (xy 193.798033 132.878168) (xy 193.798031 132.878166) (xy 193.798029 132.878163) (xy 193.636587 132.716721) + (xy 193.636583 132.716718) (xy 193.636581 132.716716) (xy 193.451883 132.582524) (xy 193.451877 132.58252) + (xy 193.248449 132.478869) (xy 193.031305 132.408314) (xy 192.80581 132.3726) (xy 192.805807 132.3726) + (xy 192.577493 132.3726) (xy 192.57749 132.3726) (xy 192.351994 132.408314) (xy 192.13485 132.478869) + (xy 191.931422 132.58252) (xy 191.931416 132.582524) (xy 191.746718 132.716716) (xy 191.585266 132.878168) + (xy 191.451074 133.062866) (xy 191.45107 133.062872) (xy 191.347419 133.2663) (xy 191.276864 133.483444) + (xy 191.24115 133.708939) (xy 189.14215 133.708939) (xy 189.106435 133.483444) (xy 189.082165 133.408749) + (xy 189.035881 133.266301) (xy 188.932229 133.062872) (xy 188.904913 133.025275) (xy 188.798033 132.878168) + (xy 188.798031 132.878166) (xy 188.798029 132.878163) (xy 188.636587 132.716721) (xy 188.636583 132.716718) + (xy 188.636581 132.716716) (xy 188.451883 132.582524) (xy 188.451877 132.58252) (xy 188.248449 132.478869) + (xy 188.031305 132.408314) (xy 187.80581 132.3726) (xy 187.805807 132.3726) (xy 187.577493 132.3726) + (xy 187.57749 132.3726) (xy 187.351994 132.408314) (xy 187.13485 132.478869) (xy 186.931422 132.58252) + (xy 186.931416 132.582524) (xy 186.746718 132.716716) (xy 186.585266 132.878168) (xy 186.451074 133.062866) + (xy 186.45107 133.062872) (xy 186.347419 133.2663) (xy 186.276864 133.483444) (xy 186.24115 133.708939) + (xy 184.14215 133.708939) (xy 184.106435 133.483444) (xy 184.082165 133.408749) (xy 184.035881 133.266301) + (xy 183.932229 133.062872) (xy 183.904913 133.025275) (xy 183.798033 132.878168) (xy 183.798031 132.878166) + (xy 183.798029 132.878163) (xy 183.636587 132.716721) (xy 183.636583 132.716718) (xy 183.636581 132.716716) + (xy 183.451883 132.582524) (xy 183.451877 132.58252) (xy 183.248449 132.478869) (xy 183.031305 132.408314) + (xy 182.80581 132.3726) (xy 182.805807 132.3726) (xy 182.577493 132.3726) (xy 182.57749 132.3726) + (xy 182.351994 132.408314) (xy 182.13485 132.478869) (xy 181.931422 132.58252) (xy 181.931416 132.582524) + (xy 181.746718 132.716716) (xy 181.585266 132.878168) (xy 181.451074 133.062866) (xy 181.45107 133.062872) + (xy 181.347419 133.2663) (xy 181.276864 133.483444) (xy 181.24115 133.708939) (xy 179.49165 133.708939) + (xy 179.49165 133.705123) (xy 179.491649 133.705121) (xy 179.460851 133.471191) (xy 179.460851 133.471186) + (xy 179.399782 133.243275) (xy 179.399778 133.243262) (xy 179.309486 133.025275) (xy 179.309484 133.02527) + (xy 179.191507 132.82093) (xy 179.128928 132.739374) (xy 178.292691 133.57561) (xy 178.267672 133.51521) + (xy 178.196538 133.408749) (xy 178.106001 133.318212) (xy 177.99954 133.247078) (xy 177.939136 133.222057) + (xy 178.775374 132.38582) (xy 178.775375 132.38582) (xy 178.693819 132.323242) (xy 178.489479 132.205265) + (xy 178.489474 132.205263) (xy 178.271487 132.114971) (xy 178.271474 132.114967) (xy 178.043561 132.053898) + (xy 177.809628 132.0231) (xy 177.573671 132.0231) (xy 177.339741 132.053898) (xy 177.339736 132.053898) + (xy 177.111825 132.114967) (xy 177.111812 132.114971) (xy 176.893825 132.205263) (xy 176.89382 132.205265) + (xy 176.689481 132.323241) (xy 176.607924 132.38582) (xy 177.444162 133.222058) (xy 177.38376 133.247078) + (xy 177.277299 133.318212) (xy 177.186762 133.408749) (xy 177.115628 133.51521) (xy 177.090608 133.575612) + (xy 176.25437 132.739374) (xy 176.191791 132.820931) (xy 176.073815 133.02527) (xy 176.073813 133.025275) + (xy 175.983521 133.243262) (xy 175.983517 133.243275) (xy 175.922448 133.471186) (xy 175.922448 133.471191) + (xy 175.89165 133.705121) (xy 174.142149 133.705121) (xy 174.142149 132.741582) (xy 174.142149 132.741581) + (xy 174.142149 132.741578) (xy 174.142148 132.741576) (xy 174.127297 132.6478) (xy 174.127296 132.647798) + (xy 174.127296 132.647796) (xy 174.0697 132.534758) (xy 173.979992 132.44505) (xy 173.866954 132.387454) + (xy 173.866955 132.387454) (xy 173.773171 132.3726) (xy 171.610128 132.3726) (xy 171.610126 132.372601) + (xy 171.51635 132.387452) (xy 171.516345 132.387454) (xy 171.403309 132.445049) (xy 171.313599 132.534759) + (xy 171.256004 132.647795) (xy 171.24115 132.741578) (xy 170.5005 132.741578) (xy 170.5005 128.300172) + (xy 170.462364 128.208103) (xy 170.429432 128.175171) (xy 170.391897 128.137635) (xy 170.391897 128.137636) + (xy 167.979496 125.725235) (xy 167.951719 125.670718) (xy 167.9505 125.655231) (xy 167.9505 125.540692) + (xy 167.9505 125.540691) (xy 167.919799 125.426114) (xy 167.919797 125.426111) (xy 167.919797 125.426109) + (xy 167.860492 125.323391) (xy 167.86049 125.323389) (xy 167.860489 125.323387) (xy 167.776613 125.239511) + (xy 167.77661 125.239509) (xy 167.776608 125.239507) (xy 167.673889 125.180202) (xy 167.67389 125.180202) + (xy 167.660351 125.176574) (xy 167.559309 125.1495) (xy 167.440691 125.1495) (xy 167.370567 125.168289) + (xy 167.326109 125.180202) (xy 167.223391 125.239507) (xy 167.139507 125.323391) (xy 167.080202 125.426109) + (xy 167.080201 125.426114) (xy 167.0495 125.540691) (xy 167.0495 125.659309) (xy 167.057304 125.688434) + (xy 167.080202 125.77389) (xy 167.139507 125.876608) (xy 167.139509 125.87661) (xy 167.139511 125.876613) + (xy 167.223387 125.960489) (xy 167.223389 125.96049) (xy 167.223391 125.960492) (xy 167.32611 126.019797) + (xy 167.326111 126.019797) (xy 167.326114 126.019799) (xy 167.440691 126.0505) (xy 167.440693 126.0505) + (xy 167.555231 126.0505) (xy 167.613422 126.069407) (xy 167.625235 126.079496) (xy 169.970504 128.424765) + (xy 169.998281 128.479282) (xy 169.9995 128.494769) (xy 169.9995 134.105231) (xy 169.980593 134.163422) + (xy 169.970503 134.175235) (xy 169.531726 134.614011) (xy 169.47721 134.641788) (xy 169.416778 134.632217) + (xy 169.373513 134.588952) (xy 169.363942 134.52852) (xy 169.370259 134.506121) (xy 169.388492 134.462103) + (xy 169.424999 134.278569) (xy 169.425 134.278565) (xy 169.425 134.035001) (xy 169.424999 134.035) + (xy 168.775 134.035) (xy 168.775 133.535) (xy 169.424999 133.535) (xy 169.425 133.534999) (xy 169.425 133.291434) + (xy 169.424999 133.29143) (xy 169.388491 133.107895) (xy 169.388491 133.107893) (xy 169.316881 132.93501) + (xy 169.316875 132.934998) (xy 169.212912 132.77941) (xy 169.212909 132.779406) (xy 169.080593 132.64709) + (xy 169.080589 132.647087) (xy 168.925001 132.543124) (xy 168.924992 132.54312) (xy 168.752105 132.471508) + (xy 168.725 132.466116) (xy 168.725 133.218011) (xy 168.71506 133.200795) (xy 168.659205 133.14494) + (xy 168.590796 133.105444) (xy 168.514496 133.085) (xy 168.435504 133.085) (xy 168.359204 133.105444) + (xy 168.290795 133.14494) (xy 168.23494 133.200795) (xy 168.225 133.218011) (xy 168.225 132.466116) + (xy 168.197894 132.471508) (xy 168.025007 132.54312) (xy 168.024998 132.543124) (xy 167.86941 132.647087) + (xy 167.869406 132.64709) (xy 167.73709 132.779406) (xy 167.737087 132.77941) (xy 167.633124 132.934998) + (xy 167.633118 132.93501) (xy 167.561508 133.107893) (xy 167.561508 133.107895) (xy 167.525 133.29143) + (xy 167.525 133.534999) (xy 167.525001 133.535) (xy 168.175 133.535) (xy 168.175 134.035) (xy 167.525001 134.035) + (xy 167.525 134.035001) (xy 167.525 134.278569) (xy 167.561508 134.462104) (xy 167.561508 134.462106) + (xy 167.633118 134.634989) (xy 167.633124 134.635001) (xy 167.737087 134.790589) (xy 167.73709 134.790593) + (xy 167.869406 134.922909) (xy 167.86941 134.922912) (xy 168.024998 135.026875) (xy 168.02501 135.026881) + (xy 168.197888 135.098489) (xy 168.197899 135.098492) (xy 168.225 135.103882) (xy 168.225 134.351988) + (xy 168.23494 134.369205) (xy 168.290795 134.42506) (xy 168.359204 134.464556) (xy 168.435504 134.485) + (xy 168.514496 134.485) (xy 168.590796 134.464556) (xy 168.659205 134.42506) (xy 168.71506 134.369205) + (xy 168.725 134.351988) (xy 168.725 135.103881) (xy 168.7521 135.098492) (xy 168.752107 135.09849) + (xy 168.796121 135.080259) (xy 168.857117 135.075458) (xy 168.909287 135.107427) (xy 168.932702 135.163955) + (xy 168.918419 135.22345) (xy 168.904011 135.241727) (xy 168.370004 135.775735) (xy 168.315487 135.803512) + (xy 168.255055 135.793941) (xy 168.229996 135.775735) (xy 165.704496 133.250235) (xy 165.676719 133.195718) + (xy 165.6755 133.180231) (xy 165.6755 131.529115) (xy 166.724438 131.529115) (xy 166.877065 131.592335) + (xy 167.041279 131.624999) (xy 167.041283 131.625) (xy 167.208717 131.625) (xy 167.20872 131.624999) + (xy 167.372934 131.592335) (xy 167.499077 131.540085) (xy 167.560074 131.535284) (xy 167.612243 131.567254) + (xy 167.628426 131.593661) (xy 167.633119 131.60499) (xy 167.633124 131.605001) (xy 167.737087 131.760589) + (xy 167.73709 131.760593) (xy 167.869406 131.892909) (xy 167.86941 131.892912) (xy 168.024998 131.996875) + (xy 168.02501 131.996881) (xy 168.197888 132.068489) (xy 168.197899 132.068492) (xy 168.225 132.073882) + (xy 168.225 131.321988) (xy 168.23494 131.339205) (xy 168.290795 131.39506) (xy 168.359204 131.434556) + (xy 168.435504 131.455) (xy 168.514496 131.455) (xy 168.590796 131.434556) (xy 168.659205 131.39506) + (xy 168.71506 131.339205) (xy 168.725 131.321988) (xy 168.725 132.073881) (xy 168.7521 132.068492) + (xy 168.752111 132.068489) (xy 168.924989 131.996881) (xy 168.925001 131.996875) (xy 169.080589 131.892912) + (xy 169.080593 131.892909) (xy 169.212909 131.760593) (xy 169.212912 131.760589) (xy 169.316875 131.605001) + (xy 169.316881 131.604989) (xy 169.388491 131.432106) (xy 169.388491 131.432104) (xy 169.424999 131.248569) + (xy 169.425 131.248565) (xy 169.425 130.655001) (xy 169.424999 130.655) (xy 168.775 130.655) (xy 168.775 130.155) + (xy 169.424999 130.155) (xy 169.425 130.154999) (xy 169.425 129.561434) (xy 169.424999 129.56143) + (xy 169.388491 129.377895) (xy 169.388491 129.377893) (xy 169.316881 129.20501) (xy 169.316875 129.204998) + (xy 169.212912 129.04941) (xy 169.212909 129.049406) (xy 169.080593 128.91709) (xy 169.080589 128.917087) + (xy 168.925001 128.813124) (xy 168.924992 128.81312) (xy 168.752105 128.741508) (xy 168.725 128.736116) + (xy 168.725 129.488011) (xy 168.71506 129.470795) (xy 168.659205 129.41494) (xy 168.590796 129.375444) + (xy 168.514496 129.355) (xy 168.435504 129.355) (xy 168.359204 129.375444) (xy 168.290795 129.41494) + (xy 168.23494 129.470795) (xy 168.225 129.488011) (xy 168.225 128.736116) (xy 168.197894 128.741508) + (xy 168.025006 128.81312) (xy 167.928306 128.877733) (xy 167.926618 128.894871) (xy 167.934837 128.911002) + (xy 167.925266 128.971434) (xy 167.90706 128.996492) (xy 167.478554 129.424999) (xy 167.478554 129.425) + (xy 167.90706 129.853507) (xy 167.934837 129.908023) (xy 167.925266 129.968455) (xy 167.90706 129.993513) + (xy 167.800574 130.099999) (xy 167.90706 130.206485) (xy 167.934837 130.261002) (xy 167.925266 130.321434) + (xy 167.90706 130.346493) (xy 167.301777 130.951777) (xy 166.724438 131.529115) (xy 165.6755 131.529115) + (xy 165.6755 131.265458) (xy 165.694407 131.207267) (xy 165.708442 131.19172) (xy 165.716095 131.184863) + (xy 165.732314 131.1755) (xy 165.781915 131.125898) (xy 165.783942 131.124083) (xy 165.809549 131.112759) + (xy 165.834513 131.10004) (xy 165.83731 131.100483) (xy 165.8399 131.099338) (xy 165.867279 131.105229) + (xy 165.894945 131.109611) (xy 165.898018 131.111843) (xy 165.899716 131.112209) (xy 165.901943 131.114695) + (xy 165.92 131.127814) (xy 165.967686 131.1755) (xy 165.967688 131.175501) (xy 165.96769 131.175503) + (xy 166.08181 131.24139) (xy 166.081808 131.24139) (xy 166.081812 131.241391) (xy 166.081814 131.241392) + (xy 166.209108 131.2755) (xy 166.20911 131.2755) (xy 166.34089 131.2755) (xy 166.340892 131.2755) + (xy 166.468186 131.241392) (xy 166.468188 131.24139) (xy 166.46819 131.24139) (xy 166.582309 131.175503) + (xy 166.582309 131.175502) (xy 166.582314 131.1755) (xy 166.6755 131.082314) (xy 166.675503 131.082309) + (xy 166.74139 130.96819) (xy 166.74139 130.968188) (xy 166.741392 130.968186) (xy 166.7755 130.840892) + (xy 166.7755 130.735218) (xy 166.925 130.735218) (xy 166.925 130.814782) (xy 166.955448 130.888291) + (xy 167.011709 130.944552) (xy 167.085218 130.975) (xy 167.164782 130.975) (xy 167.238291 130.944552) + (xy 167.294552 130.888291) (xy 167.325 130.814782) (xy 167.325 130.735218) (xy 167.294552 130.661709) + (xy 167.238291 130.605448) (xy 167.164782 130.575) (xy 167.085218 130.575) (xy 167.011709 130.605448) + (xy 166.955448 130.661709) (xy 166.925 130.735218) (xy 166.7755 130.735218) (xy 166.7755 130.709108) + (xy 166.741392 130.581814) (xy 166.74139 130.581811) (xy 166.74139 130.581809) (xy 166.675503 130.46769) + (xy 166.675501 130.467688) (xy 166.6755 130.467686) (xy 166.582314 130.3745) (xy 166.582309 130.374497) + (xy 166.574997 130.370275) (xy 166.534058 130.324804) (xy 166.5255 130.28454) (xy 166.5255 130.1) + (xy 166.803555 130.1) (xy 167.125 130.421445) (xy 167.446445 130.1) (xy 167.125 129.778555) (xy 166.803555 130.1) + (xy 166.5255 130.1) (xy 166.5255 129.915458) (xy 166.544407 129.857267) (xy 166.574999 129.829722) + (xy 166.582314 129.8255) (xy 166.6755 129.732314) (xy 166.675503 129.732309) (xy 166.74139 129.61819) + (xy 166.74139 129.618188) (xy 166.741392 129.618186) (xy 166.7755 129.490892) (xy 166.7755 129.461954) + (xy 166.794407 129.403763) (xy 166.804496 129.39195) (xy 166.811228 129.385218) (xy 166.925 129.385218) + (xy 166.925 129.464782) (xy 166.955448 129.538291) (xy 167.011709 129.594552) (xy 167.085218 129.625) + (xy 167.164782 129.625) (xy 167.238291 129.594552) (xy 167.294552 129.538291) (xy 167.325 129.464782) + (xy 167.325 129.385218) (xy 167.294552 129.311709) (xy 167.238291 129.255448) (xy 167.164782 129.225) + (xy 167.085218 129.225) (xy 167.011709 129.255448) (xy 166.955448 129.311709) (xy 166.925 129.385218) + (xy 166.811228 129.385218) (xy 166.948223 129.248223) (xy 167.52556 128.670884) (xy 167.52556 128.670883) + (xy 167.372936 128.607665) (xy 167.20872 128.575) (xy 167.041279 128.575) (xy 166.877065 128.607664) + (xy 166.722374 128.671739) (xy 166.654501 128.717091) (xy 166.595613 128.733699) (xy 166.538209 128.712521) + (xy 166.504217 128.661647) (xy 166.5005 128.634775) (xy 166.5005 128.061359) (xy 166.500501 128.06135) + (xy 166.500501 127.950172) (xy 166.462364 127.858104) (xy 166.462364 127.858103) (xy 166.391897 127.787636) + (xy 166.391895 127.787635) (xy 166.386253 127.781992) (xy 166.386249 127.781989) (xy 166.179496 127.575235) + (xy 166.151719 127.520719) (xy 166.1505 127.505232) (xy 166.1505 118.573099) (xy 208.714418 118.573099) + (xy 208.714419 118.5731) (xy 209.758638 118.5731) (xy 209.725725 118.630107) (xy 209.69165 118.757274) + (xy 209.69165 118.888926) (xy 209.725725 119.016093) (xy 209.758638 119.0731) (xy 208.714419 119.0731) + (xy 208.724891 119.139222) (xy 208.790554 119.341315) (xy 208.887025 119.530652) (xy 209.011927 119.702564) + (xy 209.162185 119.852822) (xy 209.334097 119.977724) (xy 209.523436 120.074196) (xy 209.693478 120.129445) + (xy 209.742978 120.165409) (xy 209.761886 120.223599) (xy 209.742979 120.28179) (xy 209.693479 120.317754) + (xy 209.662886 120.3226) (xy 209.410128 120.3226) (xy 209.410126 120.322601) (xy 209.31635 120.337452) + (xy 209.316345 120.337454) (xy 209.203309 120.395049) (xy 209.113599 120.484759) (xy 209.056004 120.597795) + (xy 209.04115 120.691578) (xy 209.04115 121.954621) (xy 209.041151 121.954623) (xy 209.056002 122.048399) + (xy 209.056004 122.048404) (xy 209.1136 122.161442) (xy 209.203308 122.25115) (xy 209.316346 122.308746) + (xy 209.410131 122.3236) (xy 210.973168 122.323599) (xy 210.973171 122.323599) (xy 210.973172 122.323598) + (xy 211.020061 122.316172) (xy 211.066949 122.308747) (xy 211.066949 122.308746) (xy 211.066954 122.308746) + (xy 211.179992 122.25115) (xy 211.2697 122.161442) (xy 211.327296 122.048404) (xy 211.34215 121.954619) + (xy 211.342149 120.691582) (xy 211.342149 120.691581) (xy 211.342149 120.691578) (xy 211.342148 120.691576) + (xy 211.327297 120.5978) (xy 211.327296 120.597798) (xy 211.327296 120.597796) (xy 211.2697 120.484758) + (xy 211.179992 120.39505) (xy 211.066954 120.337454) (xy 211.066955 120.337454) (xy 210.973172 120.3226) + (xy 210.720416 120.3226) (xy 210.662225 120.303693) (xy 210.626261 120.254193) (xy 210.626261 120.193007) + (xy 210.662225 120.143507) (xy 210.689824 120.129445) (xy 210.859863 120.074196) (xy 211.049202 119.977724) + (xy 211.221114 119.852822) (xy 211.371372 119.702564) (xy 211.496274 119.530652) (xy 211.592745 119.341315) + (xy 211.658408 119.139222) (xy 211.668881 119.0731) (xy 210.624662 119.0731) (xy 210.657575 119.016093) + (xy 210.69165 118.888926) (xy 210.69165 118.757274) (xy 210.657575 118.630107) (xy 210.624662 118.5731) + (xy 211.668881 118.5731) (xy 211.668881 118.573099) (xy 211.658408 118.506977) (xy 211.592745 118.304884) + (xy 211.496274 118.115547) (xy 211.371372 117.943635) (xy 211.221114 117.793377) (xy 211.049202 117.668475) + (xy 210.859865 117.572004) (xy 210.657771 117.50634) (xy 210.4479 117.4731) (xy 210.441651 117.4731) + (xy 210.44165 117.473101) (xy 210.44165 118.390088) (xy 210.384643 118.357175) (xy 210.257476 118.3231) + (xy 210.125824 118.3231) (xy 209.998657 118.357175) (xy 209.94165 118.390088) (xy 209.94165 117.473101) + (xy 209.941649 117.4731) (xy 209.9354 117.4731) (xy 209.725528 117.50634) (xy 209.523434 117.572004) + (xy 209.334097 117.668475) (xy 209.162185 117.793377) (xy 209.011927 117.943635) (xy 208.887025 118.115547) + (xy 208.790554 118.304884) (xy 208.724891 118.506977) (xy 208.714418 118.573099) (xy 166.1505 118.573099) + (xy 166.1505 116.731891) (xy 184.65215 116.731891) (xy 184.65215 116.850509) (xy 184.679224 116.951551) + (xy 184.682852 116.96509) (xy 184.742157 117.067808) (xy 184.742159 117.06781) (xy 184.742161 117.067813) + (xy 184.826037 117.151689) (xy 184.826039 117.15169) (xy 184.826041 117.151692) (xy 184.92876 117.210997) + (xy 184.928761 117.210997) (xy 184.928764 117.210999) (xy 185.043341 117.2417) (xy 185.043343 117.2417) + (xy 185.161957 117.2417) (xy 185.161959 117.2417) (xy 185.276536 117.210999) (xy 185.276538 117.210997) + (xy 185.27654 117.210997) (xy 185.379258 117.151692) (xy 185.379258 117.151691) (xy 185.379263 117.151689) + (xy 185.463139 117.067813) (xy 185.522449 116.965086) (xy 185.55315 116.850509) (xy 185.55315 116.731891) + (xy 185.522449 116.617314) (xy 185.522447 116.617311) (xy 185.522447 116.617309) (xy 185.463142 116.514591) + (xy 185.46314 116.514589) (xy 185.463139 116.514587) (xy 185.379263 116.430711) (xy 185.37926 116.430709) + (xy 185.379258 116.430707) (xy 185.276539 116.371402) (xy 185.27654 116.371402) (xy 185.263001 116.367774) + (xy 185.161959 116.3407) (xy 185.043341 116.3407) (xy 184.973217 116.359489) (xy 184.928759 116.371402) + (xy 184.826041 116.430707) (xy 184.742157 116.514591) (xy 184.682852 116.617309) (xy 184.682851 116.617314) + (xy 184.65215 116.731891) (xy 166.1505 116.731891) (xy 166.1505 115.967591) (xy 186.64635 115.967591) + (xy 186.64635 116.086209) (xy 186.673424 116.187251) (xy 186.677052 116.20079) (xy 186.736357 116.303508) + (xy 186.736359 116.30351) (xy 186.736361 116.303513) (xy 186.820237 116.387389) (xy 186.820239 116.38739) + (xy 186.820241 116.387392) (xy 186.92296 116.446697) (xy 186.922961 116.446697) (xy 186.922964 116.446699) + (xy 187.037541 116.4774) (xy 187.037543 116.4774) (xy 187.156157 116.4774) (xy 187.156159 116.4774) + (xy 187.270736 116.446699) (xy 187.270738 116.446697) (xy 187.27074 116.446697) (xy 187.373458 116.387392) + (xy 187.373458 116.387391) (xy 187.373463 116.387389) (xy 187.457339 116.303513) (xy 187.516649 116.200786) + (xy 187.54735 116.086209) (xy 187.54735 115.967591) (xy 187.516649 115.853014) (xy 187.516647 115.853011) + (xy 187.516647 115.853009) (xy 187.457342 115.750291) (xy 187.45734 115.750289) (xy 187.457339 115.750287) + (xy 187.373463 115.666411) (xy 187.37346 115.666409) (xy 187.373458 115.666407) (xy 187.270739 115.607102) + (xy 187.27074 115.607102) (xy 187.257201 115.603474) (xy 187.156159 115.5764) (xy 187.037541 115.5764) + (xy 186.967417 115.595189) (xy 186.922959 115.607102) (xy 186.820241 115.666407) (xy 186.736357 115.750291) + (xy 186.677052 115.853009) (xy 186.677051 115.853014) (xy 186.64635 115.967591) (xy 166.1505 115.967591) + (xy 166.1505 114.575791) (xy 184.80125 114.575791) (xy 184.80125 114.694409) (xy 184.828324 114.795451) + (xy 184.831952 114.80899) (xy 184.891257 114.911708) (xy 184.891259 114.91171) (xy 184.891261 114.911713) + (xy 184.975137 114.995589) (xy 184.975139 114.99559) (xy 184.975141 114.995592) (xy 185.07786 115.054897) + (xy 185.077861 115.054897) (xy 185.077864 115.054899) (xy 185.192441 115.0856) (xy 185.192443 115.0856) + (xy 185.311057 115.0856) (xy 185.311059 115.0856) (xy 185.425636 115.054899) (xy 185.425638 115.054897) + (xy 185.42564 115.054897) (xy 185.528358 114.995592) (xy 185.528358 114.995591) (xy 185.528363 114.995589) + (xy 185.612239 114.911713) (xy 185.67015 114.811409) (xy 185.671547 114.80899) (xy 185.671547 114.808988) + (xy 185.671549 114.808986) (xy 185.70225 114.694409) (xy 185.70225 114.692791) (xy 192.52565 114.692791) + (xy 192.52565 114.811409) (xy 192.526073 114.812987) (xy 192.556352 114.92599) (xy 192.615657 115.028708) + (xy 192.615659 115.02871) (xy 192.615661 115.028713) (xy 192.699537 115.112589) (xy 192.699539 115.11259) + (xy 192.699541 115.112592) (xy 192.80226 115.171897) (xy 192.802261 115.171897) (xy 192.802264 115.171899) + (xy 192.916841 115.2026) (xy 192.916843 115.2026) (xy 193.035457 115.2026) (xy 193.035459 115.2026) + (xy 193.150036 115.171899) (xy 193.150038 115.171897) (xy 193.15004 115.171897) (xy 193.252758 115.112592) + (xy 193.252758 115.112591) (xy 193.252763 115.112589) (xy 193.336639 115.028713) (xy 193.355762 114.995592) + (xy 193.395947 114.92599) (xy 193.395947 114.925988) (xy 193.395949 114.925986) (xy 193.42665 114.811409) + (xy 193.42665 114.692791) (xy 193.395949 114.578214) (xy 193.395947 114.578211) (xy 193.395947 114.578209) + (xy 193.336642 114.475491) (xy 193.33664 114.475489) (xy 193.336639 114.475487) (xy 193.252763 114.391611) + (xy 193.25276 114.391609) (xy 193.252758 114.391607) (xy 193.150039 114.332302) (xy 193.15004 114.332302) + (xy 193.136501 114.328674) (xy 193.035459 114.3016) (xy 192.916841 114.3016) (xy 192.846717 114.320389) + (xy 192.802259 114.332302) (xy 192.699541 114.391607) (xy 192.615657 114.475491) (xy 192.556352 114.578209) + (xy 192.556351 114.578214) (xy 192.52565 114.692791) (xy 185.70225 114.692791) (xy 185.70225 114.575791) + (xy 185.671549 114.461214) (xy 185.671547 114.461211) (xy 185.671547 114.461209) (xy 185.612242 114.358491) + (xy 185.61224 114.358489) (xy 185.612239 114.358487) (xy 185.528363 114.274611) (xy 185.52836 114.274609) + (xy 185.528358 114.274607) (xy 185.425639 114.215302) (xy 185.42564 114.215302) (xy 185.412101 114.211674) + (xy 185.311059 114.1846) (xy 185.192441 114.1846) (xy 185.133102 114.2005) (xy 185.077859 114.215302) + (xy 184.975141 114.274607) (xy 184.891257 114.358491) (xy 184.831952 114.461209) (xy 184.828125 114.475491) + (xy 184.80125 114.575791) (xy 166.1505 114.575791) (xy 166.1505 114.027891) (xy 169.28675 114.027891) + (xy 169.28675 114.146509) (xy 169.29299 114.169797) (xy 169.317452 114.26109) (xy 169.376757 114.363808) + (xy 169.376759 114.36381) (xy 169.376761 114.363813) (xy 169.460637 114.447689) (xy 169.460639 114.44769) + (xy 169.460641 114.447692) (xy 169.56336 114.506997) (xy 169.563361 114.506997) (xy 169.563364 114.506999) + (xy 169.677941 114.5377) (xy 169.677943 114.5377) (xy 169.796557 114.5377) (xy 169.796559 114.5377) + (xy 169.911136 114.506999) (xy 170.013863 114.447689) (xy 170.097739 114.363813) (xy 170.133658 114.3016) + (xy 170.157047 114.26109) (xy 170.157047 114.261088) (xy 170.157049 114.261086) (xy 170.18775 114.146509) + (xy 170.18775 114.027891) (xy 170.157049 113.913314) (xy 170.157047 113.913311) (xy 170.157047 113.913309) + (xy 170.097742 113.810591) (xy 170.09774 113.810589) (xy 170.097739 113.810587) (xy 170.013863 113.726711) + (xy 170.01386 113.726709) (xy 170.013858 113.726707) (xy 169.911139 113.667402) (xy 169.91114 113.667402) + (xy 169.897601 113.663774) (xy 169.796559 113.6367) (xy 169.677941 113.6367) (xy 169.623879 113.651186) + (xy 169.563359 113.667402) (xy 169.460641 113.726707) (xy 169.376757 113.810591) (xy 169.317452 113.913309) + (xy 169.317451 113.913314) (xy 169.28675 114.027891) (xy 166.1505 114.027891) (xy 166.1505 113.417991) + (xy 171.16635 113.417991) (xy 171.16635 113.536609) (xy 171.18714 113.614198) (xy 171.197052 113.65119) + (xy 171.256357 113.753908) (xy 171.256359 113.75391) (xy 171.256361 113.753913) (xy 171.340237 113.837789) + (xy 171.340239 113.83779) (xy 171.340241 113.837792) (xy 171.44296 113.897097) (xy 171.442961 113.897097) + (xy 171.442964 113.897099) (xy 171.557541 113.9278) (xy 171.557543 113.9278) (xy 171.676157 113.9278) + (xy 171.676159 113.9278) (xy 171.790736 113.897099) (xy 171.790738 113.897097) (xy 171.79074 113.897097) + (xy 171.893458 113.837792) (xy 171.893458 113.837791) (xy 171.893463 113.837789) (xy 171.977339 113.753913) + (xy 172.002986 113.709492) (xy 172.036647 113.65119) (xy 172.036647 113.651188) (xy 172.036649 113.651186) + (xy 172.06735 113.536609) (xy 172.06735 113.417991) (xy 172.036649 113.303414) (xy 172.036647 113.303411) + (xy 172.036647 113.303409) (xy 171.977342 113.200691) (xy 171.97734 113.200689) (xy 171.977339 113.200687) + (xy 171.897277 113.120625) (xy 201.60115 113.120625) (xy 201.60115 113.265575) (xy 201.605628 113.282286) + (xy 201.638667 113.405589) (xy 201.711137 113.53111) (xy 201.711139 113.531112) (xy 201.711141 113.531115) + (xy 201.813635 113.633609) (xy 201.813637 113.63361) (xy 201.813639 113.633612) (xy 201.939161 113.706082) + (xy 201.939162 113.706082) (xy 201.939165 113.706084) (xy 202.079175 113.7436) (xy 202.079176 113.7436) + (xy 202.224124 113.7436) (xy 202.224125 113.7436) (xy 202.364135 113.706084) (xy 202.364137 113.706082) + (xy 202.364139 113.706082) (xy 202.390797 113.690691) (xy 209.0995 113.690691) (xy 209.0995 113.809309) + (xy 209.107132 113.837792) (xy 209.130202 113.92389) (xy 209.189507 114.026608) (xy 209.189509 114.02661) + (xy 209.189511 114.026613) (xy 209.273387 114.110489) (xy 209.273389 114.11049) (xy 209.273391 114.110492) + (xy 209.37611 114.169797) (xy 209.376111 114.169797) (xy 209.376114 114.169799) (xy 209.490691 114.2005) + (xy 209.490693 114.2005) (xy 209.609307 114.2005) (xy 209.609309 114.2005) (xy 209.723886 114.169799) + (xy 209.723888 114.169797) (xy 209.72389 114.169797) (xy 209.826608 114.110492) (xy 209.826608 114.110491) + (xy 209.826613 114.110489) (xy 209.910489 114.026613) (xy 209.910492 114.026608) (xy 209.969797 113.92389) + (xy 209.969797 113.923888) (xy 209.969799 113.923886) (xy 210.0005 113.809309) (xy 210.0005 113.690691) + (xy 209.969799 113.576114) (xy 209.969797 113.576111) (xy 209.969797 113.576109) (xy 209.910492 113.473391) + (xy 209.91049 113.473389) (xy 209.910489 113.473387) (xy 209.826613 113.389511) (xy 209.82661 113.389509) + (xy 209.826608 113.389507) (xy 209.723889 113.330202) (xy 209.72389 113.330202) (xy 209.710351 113.326574) + (xy 209.609309 113.2995) (xy 209.490691 113.2995) (xy 209.420567 113.318289) (xy 209.376109 113.330202) + (xy 209.273391 113.389507) (xy 209.189507 113.473391) (xy 209.130202 113.576109) (xy 209.130201 113.576114) + (xy 209.0995 113.690691) (xy 202.390797 113.690691) (xy 202.48966 113.633612) (xy 202.48966 113.633611) + (xy 202.489665 113.633609) (xy 202.592159 113.531115) (xy 202.625486 113.473391) (xy 202.664632 113.405589) + (xy 202.664632 113.405587) (xy 202.664634 113.405585) (xy 202.70215 113.265575) (xy 202.70215 113.120625) + (xy 202.664634 112.980615) (xy 202.664632 112.980612) (xy 202.664632 112.98061) (xy 202.592162 112.855089) + (xy 202.59216 112.855087) (xy 202.592159 112.855085) (xy 202.489665 112.752591) (xy 202.489662 112.752589) + (xy 202.48966 112.752587) (xy 202.364138 112.680117) (xy 202.364139 112.680117) (xy 202.334546 112.672187) + (xy 202.224125 112.6426) (xy 202.079175 112.6426) (xy 202.022075 112.6579) (xy 201.93916 112.680117) + (xy 201.813639 112.752587) (xy 201.711137 112.855089) (xy 201.638667 112.98061) (xy 201.620318 113.049091) + (xy 201.60115 113.120625) (xy 171.897277 113.120625) (xy 171.893463 113.116811) (xy 171.89346 113.116809) + (xy 171.893458 113.116807) (xy 171.790739 113.057502) (xy 171.79074 113.057502) (xy 171.759353 113.049092) + (xy 171.676159 113.0268) (xy 171.557541 113.0268) (xy 171.487417 113.045589) (xy 171.442959 113.057502) + (xy 171.340241 113.116807) (xy 171.256357 113.200691) (xy 171.197052 113.303409) (xy 171.197051 113.303414) + (xy 171.16635 113.417991) (xy 166.1505 113.417991) (xy 166.1505 110.484991) (xy 196.44045 110.484991) + (xy 196.44045 110.603609) (xy 196.467524 110.704651) (xy 196.471152 110.71819) (xy 196.530457 110.820908) + (xy 196.530459 110.82091) (xy 196.530461 110.820913) (xy 196.614337 110.904789) (xy 196.614339 110.90479) + (xy 196.614341 110.904792) (xy 196.71706 110.964097) (xy 196.717061 110.964097) (xy 196.717064 110.964099) + (xy 196.831641 110.9948) (xy 196.831643 110.9948) (xy 196.950257 110.9948) (xy 196.950259 110.9948) + (xy 197.064836 110.964099) (xy 197.064838 110.964097) (xy 197.06484 110.964097) (xy 197.167558 110.904792) + (xy 197.167558 110.904791) (xy 197.167563 110.904789) (xy 197.251439 110.820913) (xy 197.310749 110.718186) + (xy 197.34145 110.603609) (xy 197.34145 110.484991) (xy 197.310749 110.370414) (xy 197.310747 110.370411) + (xy 197.310747 110.370409) (xy 197.251442 110.267691) (xy 197.25144 110.267689) (xy 197.251439 110.267687) + (xy 197.167563 110.183811) (xy 197.16756 110.183809) (xy 197.167558 110.183807) (xy 197.064839 110.124502) + (xy 197.06484 110.124502) (xy 197.051301 110.120874) (xy 196.950259 110.0938) (xy 196.831641 110.0938) + (xy 196.761517 110.112589) (xy 196.717059 110.124502) (xy 196.614341 110.183807) (xy 196.530457 110.267691) + (xy 196.471152 110.370409) (xy 196.471151 110.370414) (xy 196.44045 110.484991) (xy 166.1505 110.484991) + (xy 166.1505 109.438991) (xy 181.02385 109.438991) (xy 181.02385 109.557609) (xy 181.047054 109.644207) + (xy 181.054552 109.67219) (xy 181.113857 109.774908) (xy 181.113859 109.77491) (xy 181.113861 109.774913) + (xy 181.197737 109.858789) (xy 181.197739 109.85879) (xy 181.197741 109.858792) (xy 181.30046 109.918097) + (xy 181.300461 109.918097) (xy 181.300464 109.918099) (xy 181.415041 109.9488) (xy 181.415043 109.9488) + (xy 181.533657 109.9488) (xy 181.533659 109.9488) (xy 181.648236 109.918099) (xy 181.648238 109.918097) + (xy 181.64824 109.918097) (xy 181.750958 109.858792) (xy 181.750958 109.858791) (xy 181.750963 109.858789) + (xy 181.834839 109.774913) (xy 181.894149 109.672186) (xy 181.92485 109.557609) (xy 181.92485 109.438991) + (xy 181.894149 109.324414) (xy 181.894147 109.324411) (xy 181.894147 109.324409) (xy 181.834842 109.221691) + (xy 181.83484 109.221689) (xy 181.834839 109.221687) (xy 181.750963 109.137811) (xy 181.75096 109.137809) + (xy 181.750958 109.137807) (xy 181.648239 109.078502) (xy 181.64824 109.078502) (xy 181.634701 109.074874) + (xy 181.533659 109.0478) (xy 181.415041 109.0478) (xy 181.344917 109.066589) (xy 181.300459 109.078502) + (xy 181.197741 109.137807) (xy 181.113857 109.221691) (xy 181.054552 109.324409) (xy 181.054551 109.324414) + (xy 181.02385 109.438991) (xy 166.1505 109.438991) (xy 166.1505 107.973691) (xy 173.49645 107.973691) + (xy 173.49645 108.092309) (xy 173.523524 108.193351) (xy 173.527152 108.20689) (xy 173.586457 108.309608) + (xy 173.586459 108.30961) (xy 173.586461 108.309613) (xy 173.670337 108.393489) (xy 173.670339 108.39349) + (xy 173.670341 108.393492) (xy 173.77306 108.452797) (xy 173.773061 108.452797) (xy 173.773064 108.452799) + (xy 173.887641 108.4835) (xy 173.887643 108.4835) (xy 174.006257 108.4835) (xy 174.006259 108.4835) + (xy 174.120836 108.452799) (xy 174.120838 108.452797) (xy 174.12084 108.452797) (xy 174.223558 108.393492) + (xy 174.223558 108.393491) (xy 174.223563 108.393489) (xy 174.307439 108.309613) (xy 174.366749 108.206886) + (xy 174.39745 108.092309) (xy 174.39745 107.973691) (xy 174.366749 107.859114) (xy 174.366747 107.859111) + (xy 174.366747 107.859109) (xy 174.307442 107.756391) (xy 174.30744 107.756389) (xy 174.307439 107.756387) + (xy 174.223563 107.672511) (xy 174.22356 107.672509) (xy 174.223558 107.672507) (xy 174.120839 107.613202) + (xy 174.12084 107.613202) (xy 174.079787 107.602202) (xy 174.006259 107.5825) (xy 173.887641 107.5825) + (xy 173.83056 107.597795) (xy 173.773059 107.613202) (xy 173.670341 107.672507) (xy 173.586457 107.756391) + (xy 173.527152 107.859109) (xy 173.518176 107.892608) (xy 173.49645 107.973691) (xy 166.1505 107.973691) + (xy 166.1505 107.366791) (xy 176.91865 107.366791) (xy 176.91865 107.485409) (xy 176.934245 107.543609) + (xy 176.949352 107.59999) (xy 177.008657 107.702708) (xy 177.008659 107.70271) (xy 177.008661 107.702713) + (xy 177.092537 107.786589) (xy 177.092539 107.78659) (xy 177.092541 107.786592) (xy 177.19526 107.845897) + (xy 177.195261 107.845897) (xy 177.195264 107.845899) (xy 177.309841 107.8766) (xy 177.309843 107.8766) + (xy 177.428457 107.8766) (xy 177.428459 107.8766) (xy 177.543036 107.845899) (xy 177.543038 107.845897) + (xy 177.54304 107.845897) (xy 177.645758 107.786592) (xy 177.645758 107.786591) (xy 177.645763 107.786589) + (xy 177.729639 107.702713) (xy 177.747079 107.672507) (xy 177.755344 107.658191) (xy 186.69115 107.658191) + (xy 186.69115 107.776809) (xy 186.709662 107.845897) (xy 186.721852 107.89139) (xy 186.781157 107.994108) + (xy 186.781159 107.99411) (xy 186.781161 107.994113) (xy 186.865037 108.077989) (xy 186.865039 108.07799) + (xy 186.865041 108.077992) (xy 186.96776 108.137297) (xy 186.967761 108.137297) (xy 186.967764 108.137299) + (xy 187.082341 108.168) (xy 187.082343 108.168) (xy 187.200957 108.168) (xy 187.200959 108.168) + (xy 187.315536 108.137299) (xy 187.315538 108.137297) (xy 187.31554 108.137297) (xy 187.418258 108.077992) + (xy 187.418258 108.077991) (xy 187.418263 108.077989) (xy 187.502139 107.994113) (xy 187.560741 107.892613) + (xy 187.561447 107.89139) (xy 187.561447 107.891388) (xy 187.561449 107.891386) (xy 187.59215 107.776809) + (xy 187.59215 107.658191) (xy 187.564953 107.556691) (xy 188.24115 107.556691) (xy 188.24115 107.675309) + (xy 188.248492 107.702708) (xy 188.271852 107.78989) (xy 188.331157 107.892608) (xy 188.331159 107.89261) + (xy 188.331161 107.892613) (xy 188.415037 107.976489) (xy 188.415039 107.97649) (xy 188.415041 107.976492) + (xy 188.51776 108.035797) (xy 188.517761 108.035797) (xy 188.517764 108.035799) (xy 188.632341 108.0665) + (xy 188.632343 108.0665) (xy 188.750957 108.0665) (xy 188.750959 108.0665) (xy 188.865536 108.035799) + (xy 188.865538 108.035797) (xy 188.86554 108.035797) (xy 188.968258 107.976492) (xy 188.968258 107.976491) + (xy 188.968263 107.976489) (xy 189.052139 107.892613) (xy 189.052845 107.89139) (xy 189.111447 107.78989) + (xy 189.111447 107.789888) (xy 189.111449 107.789886) (xy 189.14215 107.675309) (xy 189.14215 107.556691) + (xy 189.111449 107.442114) (xy 189.111447 107.442111) (xy 189.111447 107.442109) (xy 189.052142 107.339391) + (xy 189.05214 107.339389) (xy 189.052139 107.339387) (xy 188.968263 107.255511) (xy 188.96826 107.255509) + (xy 188.968258 107.255507) (xy 188.865539 107.196202) (xy 188.86554 107.196202) (xy 188.852001 107.192574) + (xy 188.750959 107.1655) (xy 188.632341 107.1655) (xy 188.562217 107.184289) (xy 188.517759 107.196202) + (xy 188.415041 107.255507) (xy 188.331157 107.339391) (xy 188.271852 107.442109) (xy 188.26025 107.485409) + (xy 188.24115 107.556691) (xy 187.564953 107.556691) (xy 187.561449 107.543614) (xy 187.561446 107.543609) + (xy 187.502142 107.440891) (xy 187.50214 107.440889) (xy 187.502139 107.440887) (xy 187.418263 107.357011) + (xy 187.41826 107.357009) (xy 187.418258 107.357007) (xy 187.315539 107.297702) (xy 187.31554 107.297702) + (xy 187.302001 107.294074) (xy 187.200959 107.267) (xy 187.082341 107.267) (xy 187.012217 107.285789) + (xy 186.967759 107.297702) (xy 186.865041 107.357007) (xy 186.781157 107.440891) (xy 186.721852 107.543609) + (xy 186.71322 107.575824) (xy 186.69115 107.658191) (xy 177.755344 107.658191) (xy 177.78767 107.602202) + (xy 177.78767 107.602201) (xy 177.787672 107.602198) (xy 177.787819 107.601942) (xy 177.788949 107.599986) + (xy 177.81965 107.485409) (xy 177.81965 107.366791) (xy 177.788949 107.252214) (xy 177.788947 107.252211) + (xy 177.788947 107.252209) (xy 177.729642 107.149491) (xy 177.72964 107.149489) (xy 177.729639 107.149487) + (xy 177.645763 107.065611) (xy 177.64576 107.065609) (xy 177.645758 107.065607) (xy 177.543039 107.006302) + (xy 177.54304 107.006302) (xy 177.529501 107.002674) (xy 177.428459 106.9756) (xy 177.309841 106.9756) + (xy 177.239717 106.994389) (xy 177.195259 107.006302) (xy 177.092541 107.065607) (xy 177.008657 107.149491) + (xy 176.949352 107.252209) (xy 176.945389 107.267) (xy 176.91865 107.366791) (xy 166.1505 107.366791) + (xy 166.1505 105.573099) (xy 208.739418 105.573099) (xy 208.739419 105.5731) (xy 209.787504 105.5731) + (xy 209.74902 105.639757) (xy 209.71665 105.760565) (xy 209.71665 105.885635) (xy 209.74902 106.006443) + (xy 209.787504 106.0731) (xy 208.739419 106.0731) (xy 208.749891 106.139222) (xy 208.815554 106.341315) + (xy 208.912025 106.530652) (xy 209.036927 106.702564) (xy 209.187185 106.852822) (xy 209.359097 106.977724) + (xy 209.548436 107.074196) (xy 209.718478 107.129445) (xy 209.767978 107.165409) (xy 209.786886 107.223599) + (xy 209.767979 107.28179) (xy 209.718479 107.317754) (xy 209.687886 107.3226) (xy 209.435128 107.3226) + (xy 209.435126 107.322601) (xy 209.34135 107.337452) (xy 209.341345 107.337454) (xy 209.228309 107.395049) + (xy 209.138599 107.484759) (xy 209.081004 107.597795) (xy 209.06615 107.691578) (xy 209.06615 108.954621) + (xy 209.066151 108.954623) (xy 209.081002 109.048399) (xy 209.081004 109.048404) (xy 209.1386 109.161442) + (xy 209.228308 109.25115) (xy 209.341346 109.308746) (xy 209.435131 109.3236) (xy 210.948168 109.323599) + (xy 210.948171 109.323599) (xy 210.948172 109.323598) (xy 210.995061 109.316172) (xy 211.041949 109.308747) + (xy 211.041949 109.308746) (xy 211.041954 109.308746) (xy 211.154992 109.25115) (xy 211.2447 109.161442) + (xy 211.302296 109.048404) (xy 211.31715 108.954619) (xy 211.317149 107.691582) (xy 211.317149 107.691581) + (xy 211.317149 107.691578) (xy 211.317148 107.691576) (xy 211.302297 107.5978) (xy 211.302296 107.597798) + (xy 211.302296 107.597796) (xy 211.2447 107.484758) (xy 211.154992 107.39505) (xy 211.041954 107.337454) + (xy 211.041955 107.337454) (xy 210.948172 107.3226) (xy 210.695415 107.3226) (xy 210.637224 107.303693) + (xy 210.60126 107.254193) (xy 210.60126 107.193007) (xy 210.637224 107.143507) (xy 210.664823 107.129445) + (xy 210.834863 107.074196) (xy 211.024202 106.977724) (xy 211.196114 106.852822) (xy 211.346372 106.702564) + (xy 211.471274 106.530652) (xy 211.567745 106.341315) (xy 211.633408 106.139222) (xy 211.643881 106.0731) + (xy 210.595796 106.0731) (xy 210.63428 106.006443) (xy 210.66665 105.885635) (xy 210.66665 105.760565) + (xy 210.63428 105.639757) (xy 210.595796 105.5731) (xy 211.643881 105.5731) (xy 211.643881 105.573099) + (xy 211.633408 105.506977) (xy 211.567745 105.304884) (xy 211.471274 105.115547) (xy 211.346372 104.943635) + (xy 211.196114 104.793377) (xy 211.024202 104.668475) (xy 210.834865 104.572004) (xy 210.632772 104.506341) + (xy 210.547742 104.492873) (xy 210.493226 104.465095) (xy 210.465449 104.410578) (xy 210.475021 104.350146) + (xy 210.518286 104.306882) (xy 210.543913 104.297995) (xy 210.608485 104.285151) (xy 210.790564 104.209732) + (xy 210.954432 104.100239) (xy 211.093789 103.960882) (xy 211.203282 103.797014) (xy 211.278701 103.614935) + (xy 211.31715 103.421641) (xy 211.31715 103.224559) (xy 211.278701 103.031265) (xy 211.203282 102.849186) + (xy 211.093789 102.685318) (xy 210.954432 102.545961) (xy 210.790564 102.436468) (xy 210.790565 102.436468) + (xy 210.790563 102.436467) (xy 210.608485 102.361049) (xy 210.415193 102.3226) (xy 210.415191 102.3226) + (xy 209.968109 102.3226) (xy 209.968106 102.3226) (xy 209.774815 102.361049) (xy 209.774813 102.361049) + (xy 209.592736 102.436467) (xy 209.428868 102.545961) (xy 209.428864 102.545964) (xy 209.289514 102.685314) + (xy 209.289511 102.685318) (xy 209.180017 102.849186) (xy 209.104599 103.031263) (xy 209.104599 103.031265) + (xy 209.06615 103.224556) (xy 209.06615 103.421643) (xy 209.083727 103.510007) (xy 209.103418 103.609) + (xy 209.104599 103.614934) (xy 209.104599 103.614936) (xy 209.180017 103.797013) (xy 209.180018 103.797014) + (xy 209.289511 103.960882) (xy 209.428868 104.100239) (xy 209.592736 104.209732) (xy 209.774815 104.285151) + (xy 209.839384 104.297994) (xy 209.892767 104.327891) (xy 209.918383 104.383456) (xy 209.906446 104.443465) + (xy 209.861517 104.484998) (xy 209.835557 104.492873) (xy 209.750527 104.506341) (xy 209.548434 104.572004) + (xy 209.359097 104.668475) (xy 209.187185 104.793377) (xy 209.036927 104.943635) (xy 208.912025 105.115547) + (xy 208.815554 105.304884) (xy 208.749891 105.506977) (xy 208.739418 105.573099) (xy 166.1505 105.573099) + (xy 166.1505 103.980091) (xy 175.61625 103.980091) (xy 175.61625 104.098709) (xy 175.621636 104.118809) + (xy 175.646952 104.21329) (xy 175.706257 104.316008) (xy 175.706259 104.31601) (xy 175.706261 104.316013) + (xy 175.790137 104.399889) (xy 175.790139 104.39989) (xy 175.790141 104.399892) (xy 175.89286 104.459197) + (xy 175.892861 104.459197) (xy 175.892864 104.459199) (xy 176.007441 104.4899) (xy 176.007443 104.4899) + (xy 176.126057 104.4899) (xy 176.126059 104.4899) (xy 176.240636 104.459199) (xy 176.240638 104.459197) + (xy 176.24064 104.459197) (xy 176.343358 104.399892) (xy 176.343358 104.399891) (xy 176.343363 104.399889) + (xy 176.427239 104.316013) (xy 176.432511 104.306882) (xy 176.486547 104.21329) (xy 176.486547 104.213288) + (xy 176.486549 104.213286) (xy 176.51725 104.098709) (xy 176.51725 103.980091) (xy 176.486549 103.865514) + (xy 176.486547 103.865511) (xy 176.486547 103.865509) (xy 176.427242 103.762791) (xy 176.42724 103.762789) + (xy 176.427239 103.762787) (xy 176.343363 103.678911) (xy 176.34336 103.678909) (xy 176.343358 103.678907) + (xy 176.240639 103.619602) (xy 176.24064 103.619602) (xy 176.223219 103.614934) (xy 176.126059 103.5889) + (xy 176.007441 103.5889) (xy 175.937317 103.607689) (xy 175.892859 103.619602) (xy 175.790141 103.678907) + (xy 175.706257 103.762791) (xy 175.646952 103.865509) (xy 175.641565 103.885614) (xy 175.61625 103.980091) + (xy 166.1505 103.980091) (xy 166.1505 102.263791) (xy 188.21925 102.263791) (xy 188.21925 102.382409) + (xy 188.233735 102.436467) (xy 188.249952 102.49699) (xy 188.309257 102.599708) (xy 188.309259 102.59971) + (xy 188.309261 102.599713) (xy 188.393137 102.683589) (xy 188.393139 102.68359) (xy 188.393141 102.683592) + (xy 188.49586 102.742897) (xy 188.495861 102.742897) (xy 188.495864 102.742899) (xy 188.610441 102.7736) + (xy 188.610443 102.7736) (xy 188.729057 102.7736) (xy 188.729059 102.7736) (xy 188.843636 102.742899) + (xy 188.843638 102.742897) (xy 188.84364 102.742897) (xy 188.946358 102.683592) (xy 188.946358 102.683591) + (xy 188.946363 102.683589) (xy 189.030239 102.599713) (xy 189.089549 102.496986) (xy 189.12025 102.382409) + (xy 189.12025 102.263791) (xy 189.089549 102.149214) (xy 189.089547 102.149211) (xy 189.089547 102.149209) + (xy 189.030242 102.046491) (xy 189.03024 102.046489) (xy 189.030239 102.046487) (xy 188.946363 101.962611) + (xy 188.94636 101.962609) (xy 188.946358 101.962607) (xy 188.843639 101.903302) (xy 188.84364 101.903302) + (xy 188.830101 101.899674) (xy 188.729059 101.8726) (xy 188.610441 101.8726) (xy 188.540317 101.891389) + (xy 188.495859 101.903302) (xy 188.393141 101.962607) (xy 188.309257 102.046491) (xy 188.249952 102.149209) + (xy 188.249951 102.149214) (xy 188.21925 102.263791) (xy 166.1505 102.263791) (xy 166.1505 98.400091) + (xy 175.23345 98.400091) (xy 175.23345 98.518709) (xy 175.240064 98.543391) (xy 175.264152 98.63329) + (xy 175.323457 98.736008) (xy 175.323459 98.73601) (xy 175.323461 98.736013) (xy 175.407337 98.819889) + (xy 175.407339 98.81989) (xy 175.407341 98.819892) (xy 175.51006 98.879197) (xy 175.510061 98.879197) + (xy 175.510064 98.879199) (xy 175.624641 98.9099) (xy 175.624643 98.9099) (xy 175.743257 98.9099) + (xy 175.743259 98.9099) (xy 175.857836 98.879199) (xy 175.857838 98.879197) (xy 175.85784 98.879197) + (xy 175.960558 98.819892) (xy 175.960558 98.819891) (xy 175.960563 98.819889) (xy 176.044439 98.736013) + (xy 176.103749 98.633286) (xy 176.13445 98.518709) (xy 176.13445 98.400091) (xy 176.103749 98.285514) + (xy 176.103747 98.285511) (xy 176.103747 98.285509) (xy 176.044442 98.182791) (xy 176.04444 98.182789) + (xy 176.044439 98.182787) (xy 175.960563 98.098911) (xy 175.96056 98.098909) (xy 175.960558 98.098907) + (xy 175.857839 98.039602) (xy 175.85784 98.039602) (xy 175.844301 98.035974) (xy 175.743259 98.0089) + (xy 175.624641 98.0089) (xy 175.554517 98.027689) (xy 175.510059 98.039602) (xy 175.407341 98.098907) + (xy 175.323457 98.182791) (xy 175.264152 98.285509) (xy 175.246987 98.349569) (xy 175.23345 98.400091) + (xy 166.1505 98.400091) (xy 166.1505 97.631591) (xy 171.30965 97.631591) (xy 171.30965 97.750209) + (xy 171.330143 97.826689) (xy 171.340352 97.86479) (xy 171.399657 97.967508) (xy 171.399659 97.96751) + (xy 171.399661 97.967513) (xy 171.483537 98.051389) (xy 171.483539 98.05139) (xy 171.483541 98.051392) + (xy 171.58626 98.110697) (xy 171.586261 98.110697) (xy 171.586264 98.110699) (xy 171.700841 98.1414) + (xy 171.700843 98.1414) (xy 171.819457 98.1414) (xy 171.819459 98.1414) (xy 171.934036 98.110699) + (xy 171.934038 98.110697) (xy 171.93404 98.110697) (xy 172.036758 98.051392) (xy 172.036758 98.051391) + (xy 172.036763 98.051389) (xy 172.120639 97.967513) (xy 172.128388 97.954091) (xy 172.179947 97.86479) + (xy 172.179947 97.864788) (xy 172.179949 97.864786) (xy 172.21065 97.750209) (xy 172.21065 97.631591) + (xy 172.179949 97.517014) (xy 172.179947 97.517011) (xy 172.179947 97.517009) (xy 172.120642 97.414291) + (xy 172.12064 97.414289) (xy 172.120639 97.414287) (xy 172.036763 97.330411) (xy 172.03676 97.330409) + (xy 172.036758 97.330407) (xy 171.934039 97.271102) (xy 171.93404 97.271102) (xy 171.920501 97.267474) + (xy 171.819459 97.2404) (xy 171.700841 97.2404) (xy 171.630717 97.259189) (xy 171.586259 97.271102) + (xy 171.483541 97.330407) (xy 171.399657 97.414291) (xy 171.340352 97.517009) (xy 171.328595 97.560889) + (xy 171.30965 97.631591) (xy 166.1505 97.631591) (xy 166.1505 92.730622) (xy 173.01665 92.730622) + (xy 173.01665 92.915577) (xy 173.045582 93.098243) (xy 173.102734 93.274141) (xy 173.186696 93.438927) + (xy 173.186701 93.438935) (xy 173.201664 93.459529) (xy 173.79165 92.869543) (xy 173.79165 92.875761) + (xy 173.818909 92.977494) (xy 173.87157 93.068706) (xy 173.946044 93.14318) (xy 174.037256 93.195841) + (xy 174.138989 93.2231) (xy 174.145202 93.2231) (xy 173.555218 93.813084) (xy 173.575814 93.828048) + (xy 173.575822 93.828053) (xy 173.740608 93.912015) (xy 173.916506 93.969167) (xy 174.099173 93.9981) + (xy 174.284127 93.9981) (xy 174.466793 93.969167) (xy 174.642691 93.912015) (xy 174.807487 93.828047) + (xy 174.82808 93.813084) (xy 174.238096 93.2231) (xy 174.244311 93.2231) (xy 174.346044 93.195841) + (xy 174.437256 93.14318) (xy 174.51173 93.068706) (xy 174.564391 92.977494) (xy 174.59165 92.875761) + (xy 174.59165 92.869546) (xy 175.181634 93.45953) (xy 175.196597 93.438937) (xy 175.280565 93.274141) + (xy 175.337717 93.098243) (xy 175.36665 92.915577) (xy 175.36665 92.730622) (xy 195.36665 92.730622) + (xy 195.36665 92.915577) (xy 195.395582 93.098243) (xy 195.452734 93.274141) (xy 195.536696 93.438927) + (xy 195.536701 93.438935) (xy 195.551664 93.459529) (xy 196.14165 92.869543) (xy 196.14165 92.875761) + (xy 196.168909 92.977494) (xy 196.22157 93.068706) (xy 196.296044 93.14318) (xy 196.387256 93.195841) + (xy 196.488989 93.2231) (xy 196.495202 93.2231) (xy 195.905218 93.813084) (xy 195.925814 93.828048) + (xy 195.925822 93.828053) (xy 196.090608 93.912015) (xy 196.266506 93.969167) (xy 196.449173 93.9981) + (xy 196.634127 93.9981) (xy 196.816793 93.969167) (xy 196.992691 93.912015) (xy 197.157487 93.828047) + (xy 197.17808 93.813084) (xy 196.588096 93.2231) (xy 196.594311 93.2231) (xy 196.696044 93.195841) + (xy 196.787256 93.14318) (xy 196.86173 93.068706) (xy 196.914391 92.977494) (xy 196.94165 92.875761) + (xy 196.94165 92.869546) (xy 197.531634 93.45953) (xy 197.546597 93.438937) (xy 197.630565 93.274141) + (xy 197.687717 93.098243) (xy 197.69884 93.028022) (xy 197.71665 92.915576) (xy 197.71665 92.730623) + (xy 197.69884 92.618178) (xy 197.6917 92.573099) (xy 208.739418 92.573099) (xy 208.739419 92.5731) + (xy 209.787504 92.5731) (xy 209.74902 92.639757) (xy 209.71665 92.760565) (xy 209.71665 92.885635) + (xy 209.74902 93.006443) (xy 209.787504 93.0731) (xy 208.739419 93.0731) (xy 208.749891 93.139222) + (xy 208.815554 93.341315) (xy 208.912025 93.530652) (xy 209.036927 93.702564) (xy 209.187185 93.852822) + (xy 209.359097 93.977724) (xy 209.548436 94.074196) (xy 209.718478 94.129445) (xy 209.767978 94.165409) + (xy 209.786886 94.223599) (xy 209.767979 94.28179) (xy 209.718479 94.317754) (xy 209.687886 94.3226) + (xy 209.435128 94.3226) (xy 209.435126 94.322601) (xy 209.34135 94.337452) (xy 209.341345 94.337454) + (xy 209.228309 94.395049) (xy 209.138599 94.484759) (xy 209.081004 94.597795) (xy 209.06615 94.691578) + (xy 209.06615 95.954621) (xy 209.066151 95.954623) (xy 209.081002 96.048399) (xy 209.081004 96.048404) + (xy 209.1386 96.161442) (xy 209.228308 96.25115) (xy 209.341346 96.308746) (xy 209.435131 96.3236) + (xy 210.948168 96.323599) (xy 210.948171 96.323599) (xy 210.948172 96.323598) (xy 210.995061 96.316172) + (xy 211.041949 96.308747) (xy 211.041949 96.308746) (xy 211.041954 96.308746) (xy 211.154992 96.25115) + (xy 211.2447 96.161442) (xy 211.302296 96.048404) (xy 211.31715 95.954619) (xy 211.317149 94.691582) + (xy 211.317149 94.691581) (xy 211.317149 94.691578) (xy 211.317148 94.691576) (xy 211.302297 94.5978) + (xy 211.302296 94.597798) (xy 211.302296 94.597796) (xy 211.2447 94.484758) (xy 211.154992 94.39505) + (xy 211.041954 94.337454) (xy 211.041955 94.337454) (xy 210.948172 94.3226) (xy 210.695415 94.3226) + (xy 210.637224 94.303693) (xy 210.60126 94.254193) (xy 210.60126 94.193007) (xy 210.637224 94.143507) + (xy 210.664823 94.129445) (xy 210.834863 94.074196) (xy 211.024202 93.977724) (xy 211.196114 93.852822) + (xy 211.346372 93.702564) (xy 211.471274 93.530652) (xy 211.567745 93.341315) (xy 211.633408 93.139222) + (xy 211.643881 93.0731) (xy 210.595796 93.0731) (xy 210.63428 93.006443) (xy 210.66665 92.885635) + (xy 210.66665 92.760565) (xy 210.63428 92.639757) (xy 210.595796 92.5731) (xy 211.643881 92.5731) + (xy 211.643881 92.573099) (xy 211.633408 92.506977) (xy 211.567745 92.304884) (xy 211.471274 92.115547) + (xy 211.346372 91.943635) (xy 211.196114 91.793377) (xy 211.024202 91.668475) (xy 210.834865 91.572004) + (xy 210.632772 91.506341) (xy 210.547742 91.492873) (xy 210.493226 91.465095) (xy 210.465449 91.410578) + (xy 210.475021 91.350146) (xy 210.518286 91.306882) (xy 210.543913 91.297995) (xy 210.608485 91.285151) + (xy 210.790564 91.209732) (xy 210.954432 91.100239) (xy 211.093789 90.960882) (xy 211.203282 90.797014) + (xy 211.278701 90.614935) (xy 211.31715 90.421641) (xy 211.31715 90.224559) (xy 211.278701 90.031265) + (xy 211.203282 89.849186) (xy 211.093789 89.685318) (xy 210.954432 89.545961) (xy 210.83223 89.464308) + (xy 210.790563 89.436467) (xy 210.608485 89.361049) (xy 210.415193 89.3226) (xy 210.415191 89.3226) + (xy 209.968109 89.3226) (xy 209.968106 89.3226) (xy 209.774815 89.361049) (xy 209.774813 89.361049) + (xy 209.592736 89.436467) (xy 209.428868 89.545961) (xy 209.428864 89.545964) (xy 209.289514 89.685314) + (xy 209.289511 89.685318) (xy 209.180017 89.849186) (xy 209.104599 90.031263) (xy 209.104599 90.031265) + (xy 209.06615 90.224556) (xy 209.06615 90.421643) (xy 209.104599 90.614934) (xy 209.104599 90.614936) + (xy 209.180017 90.797013) (xy 209.180018 90.797014) (xy 209.289511 90.960882) (xy 209.428868 91.100239) + (xy 209.592736 91.209732) (xy 209.774815 91.285151) (xy 209.839384 91.297994) (xy 209.892767 91.327891) + (xy 209.918383 91.383456) (xy 209.906446 91.443465) (xy 209.861517 91.484998) (xy 209.835557 91.492873) + (xy 209.750527 91.506341) (xy 209.548434 91.572004) (xy 209.359097 91.668475) (xy 209.187185 91.793377) + (xy 209.036927 91.943635) (xy 208.912025 92.115547) (xy 208.815554 92.304884) (xy 208.749891 92.506977) + (xy 208.739418 92.573099) (xy 197.6917 92.573099) (xy 197.687717 92.547956) (xy 197.630565 92.372058) + (xy 197.546603 92.207272) (xy 197.546598 92.207264) (xy 197.531634 92.186668) (xy 196.94165 92.776652) + (xy 196.94165 92.770439) (xy 196.914391 92.668706) (xy 196.86173 92.577494) (xy 196.787256 92.50302) + (xy 196.696044 92.450359) (xy 196.594311 92.4231) (xy 196.588094 92.4231) (xy 197.17808 91.833114) + (xy 197.157485 91.818151) (xy 197.157477 91.818146) (xy 196.992693 91.734185) (xy 196.965643 91.725396) + (xy 196.916143 91.689432) (xy 196.897236 91.631241) (xy 196.916143 91.57305) (xy 196.941232 91.548927) + (xy 197.067875 91.464308) (xy 197.182858 91.349325) (xy 197.273198 91.214121) (xy 197.335426 91.063889) + (xy 197.36715 90.904405) (xy 197.36715 90.741795) (xy 197.335426 90.582311) (xy 197.273198 90.432079) + (xy 197.182858 90.296875) (xy 197.067875 90.181892) (xy 196.932671 90.091552) (xy 196.93267 90.091551) + (xy 196.932668 90.09155) (xy 196.78244 90.029324) (xy 196.622955 89.9976) (xy 196.460345 89.9976) + (xy 196.460344 89.9976) (xy 196.300859 90.029324) (xy 196.150631 90.09155) (xy 196.015428 90.181889) + (xy 195.900439 90.296878) (xy 195.8101 90.432081) (xy 195.747874 90.582309) (xy 195.71615 90.741794) + (xy 195.71615 90.904405) (xy 195.747874 91.06389) (xy 195.8101 91.214118) (xy 195.8771 91.314392) + (xy 195.900442 91.349325) (xy 196.015425 91.464308) (xy 196.015428 91.46431) (xy 196.142064 91.548925) + (xy 196.179944 91.596975) (xy 196.182346 91.658113) (xy 196.148354 91.708987) (xy 196.117657 91.725395) + (xy 196.09061 91.734183) (xy 195.925818 91.818148) (xy 195.905218 91.833114) (xy 196.495204 92.4231) + (xy 196.488989 92.4231) (xy 196.387256 92.450359) (xy 196.296044 92.50302) (xy 196.22157 92.577494) + (xy 196.168909 92.668706) (xy 196.14165 92.770439) (xy 196.14165 92.776654) (xy 195.551664 92.186668) + (xy 195.536698 92.207268) (xy 195.452734 92.372058) (xy 195.395582 92.547956) (xy 195.36665 92.730622) + (xy 175.36665 92.730622) (xy 175.337717 92.547956) (xy 175.280565 92.372058) (xy 175.196603 92.207272) + (xy 175.196598 92.207264) (xy 175.181634 92.186668) (xy 174.59165 92.776652) (xy 174.59165 92.770439) + (xy 174.564391 92.668706) (xy 174.51173 92.577494) (xy 174.437256 92.50302) (xy 174.346044 92.450359) + (xy 174.244311 92.4231) (xy 174.238094 92.4231) (xy 174.82808 91.833114) (xy 174.807485 91.818151) + (xy 174.807477 91.818146) (xy 174.642693 91.734185) (xy 174.615643 91.725396) (xy 174.566143 91.689432) + (xy 174.547236 91.631241) (xy 174.566143 91.57305) (xy 174.591232 91.548927) (xy 174.717875 91.464308) + (xy 174.832858 91.349325) (xy 174.923198 91.214121) (xy 174.985426 91.063889) (xy 175.01715 90.904405) + (xy 175.01715 90.741795) (xy 174.985426 90.582311) (xy 174.923198 90.432079) (xy 174.832858 90.296875) + (xy 174.717875 90.181892) (xy 174.582671 90.091552) (xy 174.58267 90.091551) (xy 174.582668 90.09155) + (xy 174.43244 90.029324) (xy 174.272955 89.9976) (xy 174.110345 89.9976) (xy 174.110344 89.9976) + (xy 173.950859 90.029324) (xy 173.800631 90.09155) (xy 173.665428 90.181889) (xy 173.550439 90.296878) + (xy 173.4601 90.432081) (xy 173.397874 90.582309) (xy 173.36615 90.741794) (xy 173.36615 90.904405) + (xy 173.397874 91.06389) (xy 173.4601 91.214118) (xy 173.5271 91.314392) (xy 173.550442 91.349325) + (xy 173.665425 91.464308) (xy 173.665428 91.46431) (xy 173.792064 91.548925) (xy 173.829944 91.596975) + (xy 173.832346 91.658113) (xy 173.798354 91.708987) (xy 173.767657 91.725395) (xy 173.74061 91.734183) + (xy 173.575818 91.818148) (xy 173.555218 91.833114) (xy 174.145204 92.4231) (xy 174.138989 92.4231) + (xy 174.037256 92.450359) (xy 173.946044 92.50302) (xy 173.87157 92.577494) (xy 173.818909 92.668706) + (xy 173.79165 92.770439) (xy 173.79165 92.776654) (xy 173.201664 92.186668) (xy 173.186698 92.207268) + (xy 173.102734 92.372058) (xy 173.045582 92.547956) (xy 173.01665 92.730622) (xy 166.1505 92.730622) + (xy 166.1505 86.794768) (xy 166.169407 86.736577) (xy 166.17949 86.72477) (xy 167.724764 85.179495) + (xy 167.779281 85.151719) (xy 167.794768 85.1505) (xy 167.909307 85.1505) (xy 167.909309 85.1505) + (xy 168.023886 85.119799) (xy 168.023888 85.119797) (xy 168.02389 85.119797) (xy 168.126608 85.060492) + (xy 168.126608 85.060491) (xy 168.126613 85.060489) (xy 168.210489 84.976613) (xy 168.210492 84.976608) + (xy 168.269797 84.87389) (xy 168.269797 84.873888) (xy 168.269799 84.873886) (xy 168.3005 84.759309) + (xy 168.3005 84.640691) (xy 168.269799 84.526114) (xy 168.269797 84.526111) (xy 168.269797 84.526109) + (xy 168.210492 84.423391) (xy 168.21049 84.423389) (xy 168.210489 84.423387) (xy 168.126613 84.339511) + (xy 168.12661 84.339509) (xy 168.126608 84.339507) (xy 168.023889 84.280202) (xy 168.02389 84.280202) + (xy 167.98168 84.268892) (xy 167.909309 84.2495) (xy 167.790691 84.2495) (xy 167.720567 84.268289) + (xy 167.676109 84.280202) (xy 167.573391 84.339507) (xy 167.489507 84.423391) (xy 167.430202 84.526109) + (xy 167.3995 84.640692) (xy 167.3995 84.75523) (xy 167.380593 84.813421) (xy 167.370504 84.825234) + (xy 165.919504 86.276234) (xy 165.864987 86.304011) (xy 165.804555 86.29444) (xy 165.76129 86.251175) + (xy 165.7505 86.20623) (xy 165.7505 84.410455) (xy 165.769407 84.352264) (xy 165.779496 84.340451) + (xy 166.166883 83.953064) (xy 166.2214 83.925287) (xy 166.236887 83.924068) (xy 170.331663 83.924068) + (xy 170.389854 83.942975) (xy 170.401667 83.953064) (xy 172.120504 85.6719) (xy 172.148281 85.726417) + (xy 172.1495 85.741904) (xy 172.1495 88.899828) (xy 172.187634 88.991894) (xy 172.187635 88.991895) + (xy 172.187636 88.991897) (xy 172.258103 89.062364) (xy 172.258104 89.062364) (xy 172.258105 89.062365) + (xy 172.350171 89.1005) (xy 172.350172 89.1005) (xy 172.449828 89.1005) (xy 173.346889 89.1005) + (xy 173.40508 89.119407) (xy 173.438353 89.161615) (xy 173.4601 89.214118) (xy 173.547041 89.344236) + (xy 173.550442 89.349325) (xy 173.665425 89.464308) (xy 173.800629 89.554648) (xy 173.80063 89.554648) + (xy 173.800631 89.554649) (xy 173.875745 89.585762) (xy 173.950861 89.616876) (xy 174.110345 89.6486) + (xy 174.110346 89.6486) (xy 174.272954 89.6486) (xy 174.272955 89.6486) (xy 174.432439 89.616876) + (xy 174.582671 89.554648) (xy 174.717875 89.464308) (xy 174.832858 89.349325) (xy 174.923198 89.214121) + (xy 174.985426 89.063889) (xy 174.999986 88.990691) (xy 190.4495 88.990691) (xy 190.4495 89.109309) + (xy 190.476574 89.210351) (xy 190.480202 89.22389) (xy 190.539507 89.326608) (xy 190.539509 89.32661) + (xy 190.539511 89.326613) (xy 190.623387 89.410489) (xy 190.623389 89.41049) (xy 190.623391 89.410492) + (xy 190.72611 89.469797) (xy 190.726111 89.469797) (xy 190.726114 89.469799) (xy 190.840691 89.5005) + (xy 190.840693 89.5005) (xy 190.959307 89.5005) (xy 190.959309 89.5005) (xy 191.073886 89.469799) + (xy 191.073888 89.469797) (xy 191.07389 89.469797) (xy 191.176608 89.410492) (xy 191.176608 89.410491) + (xy 191.176613 89.410489) (xy 191.260489 89.326613) (xy 191.27841 89.295574) (xy 191.319797 89.22389) + (xy 191.319797 89.223888) (xy 191.319799 89.223886) (xy 191.3505 89.109309) (xy 191.3505 88.990691) + (xy 191.319799 88.876114) (xy 191.319797 88.876111) (xy 191.319797 88.876109) (xy 191.268022 88.786433) + (xy 191.268021 88.786432) (xy 191.26049 88.773389) (xy 191.260489 88.773387) (xy 191.228896 88.741794) + (xy 195.71615 88.741794) (xy 195.71615 88.904405) (xy 195.747874 89.06389) (xy 195.8101 89.214118) + (xy 195.897041 89.344236) (xy 195.900442 89.349325) (xy 196.015425 89.464308) (xy 196.150629 89.554648) + (xy 196.15063 89.554648) (xy 196.150631 89.554649) (xy 196.225745 89.585762) (xy 196.300861 89.616876) + (xy 196.460345 89.6486) (xy 196.460346 89.6486) (xy 196.622954 89.6486) (xy 196.622955 89.6486) + (xy 196.782439 89.616876) (xy 196.932671 89.554648) (xy 197.067875 89.464308) (xy 197.182858 89.349325) + (xy 197.273198 89.214121) (xy 197.335426 89.063889) (xy 197.36715 88.904405) (xy 197.36715 88.741795) + (xy 197.36693 88.740691) (xy 198.3995 88.740691) (xy 198.3995 88.859309) (xy 198.404002 88.876109) + (xy 198.430202 88.97389) (xy 198.489507 89.076608) (xy 198.489509 89.07661) (xy 198.489511 89.076613) + (xy 198.573387 89.160489) (xy 198.573389 89.16049) (xy 198.573391 89.160492) (xy 198.67611 89.219797) + (xy 198.676111 89.219797) (xy 198.676114 89.219799) (xy 198.790691 89.2505) (xy 198.790693 89.2505) + (xy 198.909307 89.2505) (xy 198.909309 89.2505) (xy 199.023886 89.219799) (xy 199.023888 89.219797) + (xy 199.02389 89.219797) (xy 199.126608 89.160492) (xy 199.126608 89.160491) (xy 199.126613 89.160489) + (xy 199.210489 89.076613) (xy 199.225388 89.050807) (xy 199.269797 88.97389) (xy 199.269797 88.973888) + (xy 199.269799 88.973886) (xy 199.3005 88.859309) (xy 199.3005 88.744768) (xy 199.319407 88.686577) + (xy 199.329496 88.674764) (xy 199.707385 88.296875) (xy 200.262364 87.741897) (xy 200.3005 87.649828) + (xy 200.3005 87.550173) (xy 200.3005 85.990691) (xy 203.4495 85.990691) (xy 203.4495 86.109309) + (xy 203.468948 86.181888) (xy 203.480202 86.22389) (xy 203.539507 86.326608) (xy 203.539509 86.32661) + (xy 203.539511 86.326613) (xy 203.620505 86.407607) (xy 203.648281 86.462122) (xy 203.6495 86.477609) + (xy 203.6495 89.17239) (xy 203.630593 89.230581) (xy 203.620504 89.242393) (xy 203.539511 89.323386) + (xy 203.539507 89.323391) (xy 203.480202 89.426109) (xy 203.463037 89.490169) (xy 203.4495 89.540691) + (xy 203.4495 89.659309) (xy 203.470072 89.736084) (xy 203.480202 89.77389) (xy 203.539507 89.876608) + (xy 203.539509 89.87661) (xy 203.539511 89.876613) (xy 203.623387 89.960489) (xy 203.623389 89.96049) + (xy 203.623391 89.960492) (xy 203.72611 90.019797) (xy 203.726111 90.019797) (xy 203.726114 90.019799) + (xy 203.840691 90.0505) (xy 203.840693 90.0505) (xy 203.959307 90.0505) (xy 203.959309 90.0505) + (xy 204.073886 90.019799) (xy 204.073888 90.019797) (xy 204.07389 90.019797) (xy 204.176608 89.960492) + (xy 204.176608 89.960491) (xy 204.176613 89.960489) (xy 204.260489 89.876613) (xy 204.319799 89.773886) + (xy 204.3505 89.659309) (xy 204.3505 89.540691) (xy 204.319799 89.426114) (xy 204.319797 89.426111) + (xy 204.319797 89.426109) (xy 204.260492 89.323391) (xy 204.260488 89.323386) (xy 204.179496 89.242393) + (xy 204.151719 89.187876) (xy 204.1505 89.17239) (xy 204.1505 87.724556) (xy 209.06615 87.724556) + (xy 209.06615 87.724559) (xy 209.06615 87.921641) (xy 209.099947 88.09155) (xy 209.104599 88.114934) + (xy 209.104599 88.114936) (xy 209.180017 88.297013) (xy 209.214273 88.348281) (xy 209.289511 88.460882) + (xy 209.428868 88.600239) (xy 209.592736 88.709732) (xy 209.774815 88.785151) (xy 209.968109 88.8236) + (xy 209.96811 88.8236) (xy 210.41519 88.8236) (xy 210.415191 88.8236) (xy 210.608485 88.785151) + (xy 210.790564 88.709732) (xy 210.954432 88.600239) (xy 211.093789 88.460882) (xy 211.203282 88.297014) + (xy 211.278701 88.114935) (xy 211.31715 87.921641) (xy 211.31715 87.724559) (xy 211.278701 87.531265) + (xy 211.203282 87.349186) (xy 211.093789 87.185318) (xy 210.954432 87.045961) (xy 210.790564 86.936468) + (xy 210.790565 86.936468) (xy 210.790563 86.936467) (xy 210.608485 86.861049) (xy 210.415193 86.8226) + (xy 210.415191 86.8226) (xy 209.968109 86.8226) (xy 209.968106 86.8226) (xy 209.774815 86.861049) + (xy 209.774813 86.861049) (xy 209.592736 86.936467) (xy 209.428868 87.045961) (xy 209.428864 87.045964) + (xy 209.289514 87.185314) (xy 209.289511 87.185318) (xy 209.180017 87.349186) (xy 209.104599 87.531263) + (xy 209.104599 87.531265) (xy 209.06615 87.724556) (xy 204.1505 87.724556) (xy 204.1505 86.477609) + (xy 204.169407 86.419418) (xy 204.17949 86.407611) (xy 204.260489 86.326613) (xy 204.260492 86.326608) + (xy 204.319797 86.22389) (xy 204.319797 86.223888) (xy 204.319799 86.223886) (xy 204.3505 86.109309) + (xy 204.3505 85.990691) (xy 204.319799 85.876114) (xy 204.319797 85.876111) (xy 204.319797 85.876109) + (xy 204.260492 85.773391) (xy 204.26049 85.773389) (xy 204.260489 85.773387) (xy 204.176613 85.689511) + (xy 204.17661 85.689509) (xy 204.176608 85.689507) (xy 204.073889 85.630202) (xy 204.07389 85.630202) + (xy 204.060351 85.626574) (xy 203.959309 85.5995) (xy 203.840691 85.5995) (xy 203.775847 85.616875) + (xy 203.726109 85.630202) (xy 203.623391 85.689507) (xy 203.539507 85.773391) (xy 203.480202 85.876109) + (xy 203.46383 85.937212) (xy 203.4495 85.990691) (xy 200.3005 85.990691) (xy 200.3005 84.877609) + (xy 200.319407 84.819418) (xy 200.32949 84.807611) (xy 200.410489 84.726613) (xy 200.459168 84.642299) + (xy 200.469797 84.62389) (xy 200.469797 84.623888) (xy 200.469799 84.623886) (xy 200.5005 84.509309) + (xy 200.5005 84.390691) (xy 200.469799 84.276114) (xy 200.469797 84.276111) (xy 200.469797 84.276109) + (xy 200.410492 84.173391) (xy 200.41049 84.173389) (xy 200.410489 84.173387) (xy 200.326613 84.089511) + (xy 200.32661 84.089509) (xy 200.326608 84.089507) (xy 200.223889 84.030202) (xy 200.22389 84.030202) + (xy 200.210351 84.026574) (xy 200.109309 83.9995) (xy 199.990691 83.9995) (xy 199.920567 84.018289) + (xy 199.876109 84.030202) (xy 199.773391 84.089507) (xy 199.689507 84.173391) (xy 199.630202 84.276109) + (xy 199.628675 84.281809) (xy 199.5995 84.390691) (xy 199.5995 84.509309) (xy 199.625089 84.604808) + (xy 199.630202 84.62389) (xy 199.689507 84.726608) (xy 199.689509 84.72661) (xy 199.689511 84.726613) + (xy 199.770505 84.807607) (xy 199.798281 84.862122) (xy 199.7995 84.877609) (xy 199.7995 87.45523) + (xy 199.780593 87.513421) (xy 199.770504 87.525234) (xy 198.975234 88.320504) (xy 198.920717 88.348281) + (xy 198.90523 88.3495) (xy 198.790691 88.3495) (xy 198.720567 88.368289) (xy 198.676109 88.380202) + (xy 198.573391 88.439507) (xy 198.489507 88.523391) (xy 198.430202 88.626109) (xy 198.42889 88.631007) + (xy 198.3995 88.740691) (xy 197.36693 88.740691) (xy 197.335426 88.582311) (xy 197.285128 88.460881) + (xy 197.273199 88.432081) (xy 197.18286 88.296878) (xy 197.182858 88.296875) (xy 197.067875 88.181892) + (xy 196.932671 88.091552) (xy 196.93267 88.091551) (xy 196.932668 88.09155) (xy 196.78244 88.029324) + (xy 196.622955 87.9976) (xy 196.460345 87.9976) (xy 196.460344 87.9976) (xy 196.300859 88.029324) + (xy 196.150631 88.09155) (xy 196.015428 88.181889) (xy 195.900439 88.296878) (xy 195.8101 88.432081) + (xy 195.747874 88.582309) (xy 195.71615 88.741794) (xy 191.228896 88.741794) (xy 191.176613 88.689511) + (xy 191.17661 88.689509) (xy 191.176608 88.689507) (xy 191.073889 88.630202) (xy 191.07389 88.630202) + (xy 191.058615 88.626109) (xy 190.959309 88.5995) (xy 190.840691 88.5995) (xy 190.770567 88.618289) + (xy 190.726109 88.630202) (xy 190.623391 88.689507) (xy 190.539507 88.773391) (xy 190.480202 88.876109) + (xy 190.480201 88.876114) (xy 190.4495 88.990691) (xy 174.999986 88.990691) (xy 175.01715 88.904405) + (xy 175.01715 88.741795) (xy 174.985426 88.582311) (xy 174.935128 88.460881) (xy 174.923199 88.432081) + (xy 174.83286 88.296878) (xy 174.832858 88.296875) (xy 174.717875 88.181892) (xy 174.582671 88.091552) + (xy 174.58267 88.091551) (xy 174.582668 88.09155) (xy 174.43244 88.029324) (xy 174.272955 87.9976) + (xy 174.110345 87.9976) (xy 174.110344 87.9976) (xy 173.950859 88.029324) (xy 173.800631 88.09155) + (xy 173.665428 88.181889) (xy 173.550439 88.296878) (xy 173.4601 88.432081) (xy 173.416069 88.538385) + (xy 173.376333 88.584911) (xy 173.324605 88.5995) (xy 172.7495 88.5995) (xy 172.691309 88.580593) + (xy 172.655345 88.531093) (xy 172.6505 88.5005) (xy 172.6505 85.875219) (xy 172.669407 85.817028) + (xy 172.718907 85.781064) (xy 172.780093 85.781064) (xy 172.819504 85.805215) (xy 173.409304 86.395015) + (xy 173.437081 86.449532) (xy 173.430765 86.502903) (xy 173.397874 86.582311) (xy 173.36615 86.741794) + (xy 173.36615 86.904405) (xy 173.397874 87.06389) (xy 173.4601 87.214118) (xy 173.460101 87.21412) + (xy 173.460102 87.214121) (xy 173.550442 87.349325) (xy 173.665425 87.464308) (xy 173.800629 87.554648) + (xy 173.950861 87.616876) (xy 174.110345 87.6486) (xy 174.110346 87.6486) (xy 174.272954 87.6486) + (xy 174.272955 87.6486) (xy 174.432439 87.616876) (xy 174.582671 87.554648) (xy 174.717875 87.464308) + (xy 174.832858 87.349325) (xy 174.923198 87.214121) (xy 174.985426 87.063889) (xy 175.01715 86.904405) + (xy 175.01715 86.790691) (xy 193.3995 86.790691) (xy 193.3995 86.909309) (xy 193.426574 87.010351) + (xy 193.430202 87.02389) (xy 193.489507 87.126608) (xy 193.489509 87.12661) (xy 193.489511 87.126613) + (xy 193.573387 87.210489) (xy 193.573389 87.21049) (xy 193.573391 87.210492) (xy 193.67611 87.269797) + (xy 193.676111 87.269797) (xy 193.676114 87.269799) (xy 193.790691 87.3005) (xy 193.790693 87.3005) + (xy 193.909307 87.3005) (xy 193.909309 87.3005) (xy 194.023886 87.269799) (xy 194.023888 87.269797) + (xy 194.02389 87.269797) (xy 194.126608 87.210492) (xy 194.126608 87.210491) (xy 194.126613 87.210489) + (xy 194.210489 87.126613) (xy 194.210492 87.126608) (xy 194.269797 87.02389) (xy 194.269797 87.023888) + (xy 194.269799 87.023886) (xy 194.3005 86.909309) (xy 194.3005 86.790691) (xy 194.269799 86.676114) + (xy 194.269797 86.676111) (xy 194.269797 86.676109) (xy 194.210492 86.573391) (xy 194.21049 86.573389) + (xy 194.210489 86.573387) (xy 194.126613 86.489511) (xy 194.12661 86.489509) (xy 194.126608 86.489507) + (xy 194.023889 86.430202) (xy 194.02389 86.430202) (xy 194.006584 86.425565) (xy 193.909309 86.3995) + (xy 193.790691 86.3995) (xy 193.720567 86.418289) (xy 193.676109 86.430202) (xy 193.573391 86.489507) + (xy 193.489507 86.573391) (xy 193.430202 86.676109) (xy 193.430201 86.676114) (xy 193.3995 86.790691) + (xy 175.01715 86.790691) (xy 175.01715 86.741795) (xy 174.985426 86.582311) (xy 174.928649 86.445239) + (xy 174.923199 86.432081) (xy 174.918845 86.425565) (xy 174.832858 86.296875) (xy 174.717875 86.181892) + (xy 174.717869 86.181888) (xy 174.582668 86.09155) (xy 174.43244 86.029324) (xy 174.272955 85.9976) + (xy 174.110345 85.9976) (xy 174.110344 85.9976) (xy 173.950861 86.029324) (xy 173.871453 86.062215) + (xy 173.810456 86.067014) (xy 173.763565 86.040754) (xy 172.464605 84.741794) (xy 173.36615 84.741794) + (xy 173.36615 84.904405) (xy 173.397874 85.06389) (xy 173.4601 85.214118) (xy 173.460101 85.21412) + (xy 173.460102 85.214121) (xy 173.550442 85.349325) (xy 173.665425 85.464308) (xy 173.800629 85.554648) + (xy 173.950861 85.616876) (xy 174.110345 85.6486) (xy 174.110346 85.6486) (xy 174.272954 85.6486) + (xy 174.272955 85.6486) (xy 174.432439 85.616876) (xy 174.582671 85.554648) (xy 174.717875 85.464308) + (xy 174.832858 85.349325) (xy 174.923198 85.214121) (xy 174.985426 85.063889) (xy 175.01715 84.904405) + (xy 175.01715 84.741795) (xy 175.014928 84.730622) (xy 195.36665 84.730622) (xy 195.36665 84.915577) + (xy 195.395582 85.098243) (xy 195.452734 85.274141) (xy 195.536696 85.438927) (xy 195.536701 85.438935) + (xy 195.551664 85.459529) (xy 196.14165 84.869543) (xy 196.14165 84.875761) (xy 196.168909 84.977494) + (xy 196.22157 85.068706) (xy 196.296044 85.14318) (xy 196.387256 85.195841) (xy 196.488989 85.2231) + (xy 196.495202 85.2231) (xy 195.905218 85.813084) (xy 195.925814 85.828048) (xy 195.925822 85.828053) + (xy 196.09061 85.912016) (xy 196.090608 85.912016) (xy 196.117654 85.920803) (xy 196.167155 85.956766) + (xy 196.186063 86.014956) (xy 196.167157 86.073147) (xy 196.142065 86.097273) (xy 196.015429 86.181888) + (xy 195.900439 86.296878) (xy 195.8101 86.432081) (xy 195.747874 86.582309) (xy 195.71615 86.741794) + (xy 195.71615 86.904405) (xy 195.747874 87.06389) (xy 195.8101 87.214118) (xy 195.810101 87.21412) + (xy 195.810102 87.214121) (xy 195.900442 87.349325) (xy 196.015425 87.464308) (xy 196.150629 87.554648) + (xy 196.300861 87.616876) (xy 196.460345 87.6486) (xy 196.460346 87.6486) (xy 196.622954 87.6486) + (xy 196.622955 87.6486) (xy 196.782439 87.616876) (xy 196.932671 87.554648) (xy 197.067875 87.464308) + (xy 197.182858 87.349325) (xy 197.273198 87.214121) (xy 197.335426 87.063889) (xy 197.36715 86.904405) + (xy 197.36715 86.741795) (xy 197.335426 86.582311) (xy 197.278649 86.445239) (xy 197.273199 86.432081) + (xy 197.268845 86.425565) (xy 197.182858 86.296875) (xy 197.067875 86.181892) (xy 197.067869 86.181888) + (xy 196.941235 86.097274) (xy 196.903355 86.049224) (xy 196.900953 85.988086) (xy 196.934946 85.937212) + (xy 196.965646 85.920803) (xy 196.992688 85.912017) (xy 196.992689 85.912016) (xy 197.157487 85.828047) + (xy 197.17808 85.813084) (xy 196.588096 85.2231) (xy 196.594311 85.2231) (xy 196.696044 85.195841) + (xy 196.787256 85.14318) (xy 196.86173 85.068706) (xy 196.914391 84.977494) (xy 196.94165 84.875761) + (xy 196.94165 84.869546) (xy 197.531634 85.45953) (xy 197.546597 85.438937) (xy 197.630565 85.274141) + (xy 197.687717 85.098243) (xy 197.71665 84.915577) (xy 197.71665 84.730622) (xy 197.687717 84.547956) + (xy 197.630565 84.372058) (xy 197.546603 84.207272) (xy 197.546598 84.207264) (xy 197.531634 84.186668) + (xy 196.94165 84.776652) (xy 196.94165 84.770439) (xy 196.914391 84.668706) (xy 196.86173 84.577494) + (xy 196.787256 84.50302) (xy 196.696044 84.450359) (xy 196.594311 84.4231) (xy 196.588094 84.4231) + (xy 197.17808 83.833114) (xy 197.157485 83.818151) (xy 197.157477 83.818146) (xy 196.992693 83.734185) + (xy 196.965643 83.725396) (xy 196.916143 83.689432) (xy 196.897236 83.631241) (xy 196.916143 83.57305) + (xy 196.941232 83.548927) (xy 197.067875 83.464308) (xy 197.182858 83.349325) (xy 197.273198 83.214121) + (xy 197.335426 83.063889) (xy 197.36715 82.904405) (xy 197.36715 82.741795) (xy 197.335426 82.582311) + (xy 197.294203 82.48279) (xy 197.273199 82.432081) (xy 197.230521 82.368209) (xy 197.182858 82.296875) + (xy 197.067875 82.181892) (xy 197.067869 82.181888) (xy 196.932668 82.09155) (xy 196.78244 82.029324) + (xy 196.622955 81.9976) (xy 196.460345 81.9976) (xy 196.460344 81.9976) (xy 196.300859 82.029324) + (xy 196.150631 82.09155) (xy 196.015428 82.181889) (xy 195.900439 82.296878) (xy 195.8101 82.432081) + (xy 195.747874 82.582309) (xy 195.71615 82.741794) (xy 195.71615 82.904405) (xy 195.747874 83.06389) + (xy 195.8101 83.214118) (xy 195.810101 83.21412) (xy 195.810102 83.214121) (xy 195.900442 83.349325) + (xy 196.015425 83.464308) (xy 196.015428 83.46431) (xy 196.142064 83.548925) (xy 196.179944 83.596975) + (xy 196.182346 83.658113) (xy 196.148354 83.708987) (xy 196.117657 83.725395) (xy 196.09061 83.734183) + (xy 195.925818 83.818148) (xy 195.905218 83.833114) (xy 196.495204 84.4231) (xy 196.488989 84.4231) + (xy 196.387256 84.450359) (xy 196.296044 84.50302) (xy 196.22157 84.577494) (xy 196.168909 84.668706) + (xy 196.14165 84.770439) (xy 196.14165 84.776654) (xy 195.551664 84.186668) (xy 195.536698 84.207268) + (xy 195.452734 84.372058) (xy 195.395582 84.547956) (xy 195.36665 84.730622) (xy 175.014928 84.730622) + (xy 174.985426 84.582311) (xy 174.923198 84.432079) (xy 174.832858 84.296875) (xy 174.717875 84.181892) + (xy 174.705152 84.173391) (xy 174.582668 84.09155) (xy 174.43244 84.029324) (xy 174.272955 83.9976) + (xy 174.110345 83.9976) (xy 174.110344 83.9976) (xy 173.950859 84.029324) (xy 173.800631 84.09155) + (xy 173.665428 84.181889) (xy 173.550439 84.296878) (xy 173.4601 84.432081) (xy 173.397874 84.582309) + (xy 173.36615 84.741794) (xy 172.464605 84.741794) (xy 170.942315 83.219504) (xy 170.914538 83.164987) + (xy 170.924109 83.104555) (xy 170.967374 83.06129) (xy 171.012319 83.0505) (xy 173.326179 83.0505) + (xy 173.38437 83.069407) (xy 173.417643 83.111615) (xy 173.4601 83.214118) (xy 173.460101 83.21412) + (xy 173.460102 83.214121) (xy 173.550442 83.349325) (xy 173.665425 83.464308) (xy 173.800629 83.554648) + (xy 173.950861 83.616876) (xy 174.110345 83.6486) (xy 174.110346 83.6486) (xy 174.272954 83.6486) + (xy 174.272955 83.6486) (xy 174.432439 83.616876) (xy 174.582671 83.554648) (xy 174.717875 83.464308) + (xy 174.832858 83.349325) (xy 174.923198 83.214121) (xy 174.985426 83.063889) (xy 175.01715 82.904405) + (xy 175.01715 82.741795) (xy 174.985426 82.582311) (xy 174.944203 82.48279) (xy 174.923199 82.432081) + (xy 174.880521 82.368209) (xy 174.832858 82.296875) (xy 174.717875 82.181892) (xy 174.717869 82.181888) + (xy 174.591235 82.097274) (xy 174.553355 82.049224) (xy 174.550953 81.988086) (xy 174.584946 81.937212) + (xy 174.615646 81.920803) (xy 174.642688 81.912017) (xy 174.642689 81.912016) (xy 174.807487 81.828047) + (xy 174.82808 81.813084) (xy 174.238096 81.2231) (xy 174.244311 81.2231) (xy 174.346044 81.195841) + (xy 174.437256 81.14318) (xy 174.51173 81.068706) (xy 174.564391 80.977494) (xy 174.59165 80.875761) + (xy 174.59165 80.869546) (xy 175.181634 81.45953) (xy 175.196597 81.438937) (xy 175.280565 81.274141) + (xy 175.337717 81.098243) (xy 175.36665 80.915577) (xy 175.36665 80.741794) (xy 195.71615 80.741794) + (xy 195.71615 80.904405) (xy 195.747874 81.06389) (xy 195.8101 81.214118) (xy 195.810101 81.21412) + (xy 195.810102 81.214121) (xy 195.900442 81.349325) (xy 196.015425 81.464308) (xy 196.150629 81.554648) + (xy 196.15063 81.554648) (xy 196.150631 81.554649) (xy 196.225745 81.585762) (xy 196.300861 81.616876) + (xy 196.460345 81.6486) (xy 196.460346 81.6486) (xy 196.622954 81.6486) (xy 196.622955 81.6486) + (xy 196.782439 81.616876) (xy 196.932671 81.554648) (xy 197.067875 81.464308) (xy 197.182858 81.349325) + (xy 197.273198 81.214121) (xy 197.335426 81.063889) (xy 197.36715 80.904405) (xy 197.36715 80.741795) + (xy 197.335426 80.582311) (xy 197.28077 80.450359) (xy 197.273199 80.432081) (xy 197.233455 80.3726) + (xy 197.182858 80.296875) (xy 197.067875 80.181892) (xy 196.932671 80.091552) (xy 196.93267 80.091551) + (xy 196.932668 80.09155) (xy 196.78244 80.029324) (xy 196.622955 79.9976) (xy 196.460345 79.9976) + (xy 196.460344 79.9976) (xy 196.300859 80.029324) (xy 196.150631 80.09155) (xy 196.015428 80.181889) + (xy 195.900439 80.296878) (xy 195.8101 80.432081) (xy 195.747874 80.582309) (xy 195.71615 80.741794) + (xy 175.36665 80.741794) (xy 175.36665 80.730622) (xy 175.337717 80.547956) (xy 175.280565 80.372058) + (xy 175.196603 80.207272) (xy 175.196598 80.207264) (xy 175.181634 80.186668) (xy 174.59165 80.776652) + (xy 174.59165 80.770439) (xy 174.564391 80.668706) (xy 174.51173 80.577494) (xy 174.437256 80.50302) + (xy 174.346044 80.450359) (xy 174.244311 80.4231) (xy 174.238094 80.4231) (xy 174.82808 79.833114) + (xy 174.807485 79.818151) (xy 174.807477 79.818146) (xy 174.642693 79.734185) (xy 174.615643 79.725396) + (xy 174.566143 79.689432) (xy 174.547236 79.631241) (xy 174.566143 79.57305) (xy 174.591232 79.548927) + (xy 174.717875 79.464308) (xy 174.832858 79.349325) (xy 174.923198 79.214121) (xy 174.985426 79.063889) + (xy 175.01715 78.904405) (xy 175.01715 78.741795) (xy 175.01715 78.741794) (xy 195.71615 78.741794) + (xy 195.71615 78.904405) (xy 195.747874 79.06389) (xy 195.8101 79.214118) (xy 195.899419 79.347795) + (xy 195.900442 79.349325) (xy 196.015425 79.464308) (xy 196.150629 79.554648) (xy 196.300861 79.616876) + (xy 196.460345 79.6486) (xy 196.460346 79.6486) (xy 196.622954 79.6486) (xy 196.622955 79.6486) + (xy 196.782439 79.616876) (xy 196.932671 79.554648) (xy 197.067875 79.464308) (xy 197.182858 79.349325) + (xy 197.273198 79.214121) (xy 197.335426 79.063889) (xy 197.36715 78.904405) (xy 197.36715 78.741795) + (xy 197.335426 78.582311) (xy 197.273198 78.432079) (xy 197.182858 78.296875) (xy 197.067875 78.181892) + (xy 196.932671 78.091552) (xy 196.93267 78.091551) (xy 196.932668 78.09155) (xy 196.78244 78.029324) + (xy 196.622955 77.9976) (xy 196.460345 77.9976) (xy 196.460344 77.9976) (xy 196.300859 78.029324) + (xy 196.150631 78.09155) (xy 196.015428 78.181889) (xy 195.900439 78.296878) (xy 195.8101 78.432081) + (xy 195.747874 78.582309) (xy 195.71615 78.741794) (xy 175.01715 78.741794) (xy 174.985426 78.582311) + (xy 174.923198 78.432079) (xy 174.832858 78.296875) (xy 174.717875 78.181892) (xy 174.582671 78.091552) + (xy 174.58267 78.091551) (xy 174.582668 78.09155) (xy 174.43244 78.029324) (xy 174.272955 77.9976) + (xy 174.110345 77.9976) (xy 174.110344 77.9976) (xy 173.950859 78.029324) (xy 173.800631 78.09155) + (xy 173.665428 78.181889) (xy 173.550439 78.296878) (xy 173.4601 78.432081) (xy 173.397874 78.582309) + (xy 173.36615 78.741794) (xy 173.36615 78.904405) (xy 173.397874 79.06389) (xy 173.4601 79.214118) + (xy 173.549419 79.347795) (xy 173.550442 79.349325) (xy 173.665425 79.464308) (xy 173.665428 79.46431) + (xy 173.792064 79.548925) (xy 173.829944 79.596975) (xy 173.832346 79.658113) (xy 173.798354 79.708987) + (xy 173.767657 79.725395) (xy 173.74061 79.734183) (xy 173.575818 79.818148) (xy 173.555218 79.833114) + (xy 174.145204 80.4231) (xy 174.138989 80.4231) (xy 174.037256 80.450359) (xy 173.946044 80.50302) + (xy 173.87157 80.577494) (xy 173.818909 80.668706) (xy 173.79165 80.770439) (xy 173.79165 80.776654) + (xy 173.201664 80.186668) (xy 173.186698 80.207268) (xy 173.102734 80.372058) (xy 173.045582 80.547956) + (xy 173.01665 80.730622) (xy 173.01665 80.915577) (xy 173.045582 81.098243) (xy 173.102734 81.274141) + (xy 173.186696 81.438927) (xy 173.186701 81.438935) (xy 173.201664 81.459529) (xy 173.79165 80.869543) + (xy 173.79165 80.875761) (xy 173.818909 80.977494) (xy 173.87157 81.068706) (xy 173.946044 81.14318) + (xy 174.037256 81.195841) (xy 174.138989 81.2231) (xy 174.145202 81.2231) (xy 173.555218 81.813084) + (xy 173.575814 81.828048) (xy 173.575822 81.828053) (xy 173.74061 81.912016) (xy 173.740608 81.912016) + (xy 173.767654 81.920803) (xy 173.817155 81.956766) (xy 173.836063 82.014956) (xy 173.817157 82.073147) + (xy 173.792065 82.097273) (xy 173.665429 82.181888) (xy 173.550439 82.296878) (xy 173.4601 82.432081) + (xy 173.436779 82.488385) (xy 173.397043 82.534911) (xy 173.345315 82.5495) (xy 165.700171 82.5495) + (xy 165.608105 82.587634) (xy 155.708103 92.487636) (xy 155.708102 92.487635) (xy 155.637635 92.558103) + (xy 155.5995 92.650171) (xy 155.5995 127.255231) (xy 155.580593 127.313422) (xy 155.570504 127.325235) + (xy 151.425235 131.470504) (xy 151.370718 131.498281) (xy 151.355231 131.4995) (xy 143.950171 131.4995) + (xy 143.858105 131.537634) (xy 141.758103 133.637636) (xy 141.758102 133.637635) (xy 141.687635 133.708103) + (xy 141.6495 133.800171) (xy 141.6495 135.17239) (xy 141.630593 135.230581) (xy 141.620504 135.242393) + (xy 141.539511 135.323386) (xy 141.539507 135.323391) (xy 141.480202 135.426109) (xy 141.475304 135.444388) + (xy 141.4495 135.540691) (xy 87.029472 135.540691) (xy 87.04215 135.444388) (xy 87.04215 135.201812) + (xy 87.010488 134.961311) (xy 86.947704 134.727) (xy 86.854874 134.502888) (xy 86.733586 134.292811) + (xy 86.585915 134.100362) (xy 86.414388 133.928835) (xy 86.414383 133.928831) (xy 86.414381 133.928829) + (xy 86.221942 133.781166) (xy 86.19349 133.764739) (xy 86.011862 133.659876) (xy 86.011858 133.659874) + (xy 86.011854 133.659872) (xy 85.787755 133.567048) (xy 85.787754 133.567047) (xy 85.78775 133.567046) + (xy 85.553439 133.504262) (xy 85.553436 133.504261) (xy 85.553434 133.504261) (xy 85.312939 133.4726) + (xy 85.312938 133.4726) (xy 85.070362 133.4726) (xy 85.07036 133.4726) (xy 84.829868 133.504261) + (xy 84.829863 133.504261) (xy 84.595557 133.567044) (xy 84.595544 133.567048) (xy 84.371445 133.659872) + (xy 84.161357 133.781166) (xy 83.968918 133.928829) (xy 83.797379 134.100368) (xy 83.649716 134.292807) + (xy 83.528422 134.502895) (xy 83.435598 134.726994) (xy 83.435594 134.727007) (xy 83.372811 134.961313) + (xy 83.372811 134.961318) (xy 83.34115 135.20181) (xy 80.857322 135.20181) (xy 80.850819 128.768272) + (xy 114.30115 128.768272) (xy 114.30115 130.397927) (xy 114.309882 130.44182) (xy 114.309884 130.441824) + (xy 114.327167 130.46769) (xy 114.343146 130.491604) (xy 114.392928 130.524867) (xy 114.403977 130.527064) + (xy 114.436822 130.533599) (xy 114.436828 130.533599) (xy 114.43683 130.5336) (xy 114.436831 130.5336) + (xy 116.066469 130.5336) (xy 116.06647 130.5336) (xy 116.066471 130.533599) (xy 116.066477 130.533599) + (xy 116.088273 130.529262) (xy 116.110372 130.524867) (xy 116.160154 130.491604) (xy 116.193417 130.441822) + (xy 116.20215 130.39792) (xy 116.20215 129.489481) (xy 116.84115 129.489481) (xy 116.84115 129.676718) + (xy 116.877676 129.860349) (xy 116.949327 130.033329) (xy 116.949331 130.033338) (xy 117.023715 130.144659) + (xy 117.053348 130.189008) (xy 117.185742 130.321402) (xy 117.252113 130.365749) (xy 117.341411 130.425418) + (xy 117.341417 130.42542) (xy 117.341419 130.425422) (xy 117.514399 130.497073) (xy 117.698034 130.5336) + (xy 117.698035 130.5336) (xy 117.885265 130.5336) (xy 117.885266 130.5336) (xy 118.068901 130.497073) + (xy 118.241881 130.425422) (xy 118.241884 130.425419) (xy 118.241888 130.425418) (xy 118.286837 130.395382) + (xy 118.397558 130.321402) (xy 118.529952 130.189008) (xy 118.623486 130.049025) (xy 118.633968 130.033338) + (xy 118.633969 130.033334) (xy 118.633972 130.033331) (xy 118.705623 129.860351) (xy 118.74215 129.676716) + (xy 118.74215 129.489484) (xy 118.742149 129.489481) (xy 119.38115 129.489481) (xy 119.38115 129.676718) + (xy 119.417676 129.860349) (xy 119.489327 130.033329) (xy 119.489331 130.033338) (xy 119.563715 130.144659) + (xy 119.593348 130.189008) (xy 119.725742 130.321402) (xy 119.792113 130.365749) (xy 119.881411 130.425418) + (xy 119.881417 130.42542) (xy 119.881419 130.425422) (xy 120.054399 130.497073) (xy 120.238034 130.5336) + (xy 120.238035 130.5336) (xy 120.425265 130.5336) (xy 120.425266 130.5336) (xy 120.608901 130.497073) + (xy 120.781881 130.425422) (xy 120.781884 130.425419) (xy 120.781888 130.425418) (xy 120.826837 130.395382) + (xy 120.937558 130.321402) (xy 121.069952 130.189008) (xy 121.163486 130.049025) (xy 121.173968 130.033338) + (xy 121.173969 130.033334) (xy 121.173972 130.033331) (xy 121.245623 129.860351) (xy 121.28215 129.676716) + (xy 121.28215 129.489484) (xy 121.282149 129.489481) (xy 121.92115 129.489481) (xy 121.92115 129.676718) + (xy 121.957676 129.860349) (xy 122.029327 130.033329) (xy 122.029331 130.033338) (xy 122.103715 130.144659) + (xy 122.133348 130.189008) (xy 122.265742 130.321402) (xy 122.332113 130.365749) (xy 122.421411 130.425418) + (xy 122.421417 130.42542) (xy 122.421419 130.425422) (xy 122.594399 130.497073) (xy 122.778034 130.5336) + (xy 122.778035 130.5336) (xy 122.965265 130.5336) (xy 122.965266 130.5336) (xy 123.148901 130.497073) + (xy 123.321881 130.425422) (xy 123.321884 130.425419) (xy 123.321888 130.425418) (xy 123.366837 130.395382) + (xy 123.477558 130.321402) (xy 123.609952 130.189008) (xy 123.703486 130.049025) (xy 123.713968 130.033338) + (xy 123.713969 130.033334) (xy 123.713972 130.033331) (xy 123.785623 129.860351) (xy 123.82215 129.676716) + (xy 123.82215 129.489484) (xy 123.822149 129.489481) (xy 124.46115 129.489481) (xy 124.46115 129.676718) + (xy 124.497676 129.860349) (xy 124.569327 130.033329) (xy 124.569331 130.033338) (xy 124.643715 130.144659) + (xy 124.673348 130.189008) (xy 124.805742 130.321402) (xy 124.872113 130.365749) (xy 124.961411 130.425418) + (xy 124.961417 130.42542) (xy 124.961419 130.425422) (xy 125.134399 130.497073) (xy 125.318034 130.5336) + (xy 125.318035 130.5336) (xy 125.505265 130.5336) (xy 125.505266 130.5336) (xy 125.688901 130.497073) + (xy 125.861881 130.425422) (xy 125.861884 130.425419) (xy 125.861888 130.425418) (xy 125.906837 130.395382) + (xy 126.017558 130.321402) (xy 126.149952 130.189008) (xy 126.243486 130.049025) (xy 126.253968 130.033338) + (xy 126.253969 130.033334) (xy 126.253972 130.033331) (xy 126.325623 129.860351) (xy 126.36215 129.676716) + (xy 126.36215 129.489484) (xy 126.331043 129.333099) (xy 126.67504 129.333099) (xy 126.675041 129.3331) + (xy 127.518638 129.3331) (xy 127.485725 129.390107) (xy 127.45165 129.517274) (xy 127.45165 129.648926) + (xy 127.485725 129.776093) (xy 127.518638 129.8331) (xy 126.67504 129.8331) (xy 126.683659 129.887514) (xy 126.746893 130.082127) (xy 126.839788 130.264446) (xy 126.960064 130.429991) (xy 127.104758 130.574685) (xy 127.270303 130.694961) (xy 127.452622 130.787856) (xy 127.647239 130.851091) (xy 127.647235 130.851091) (xy 127.701649 130.859708) (xy 127.70165 130.859707) (xy 127.70165 130.016112) (xy 127.758657 130.049025) @@ -47584,131 +55796,113 @@ (xy 130.24165 130.859707) (xy 130.24165 130.016112) (xy 130.298657 130.049025) (xy 130.425824 130.0831) (xy 130.557476 130.0831) (xy 130.684643 130.049025) (xy 130.74165 130.016112) (xy 130.74165 130.859708) (xy 130.796062 130.851091) (xy 130.990677 130.787856) (xy 131.172996 130.694961) (xy 131.338541 130.574685) - (xy 131.483235 130.429991) (xy 131.603511 130.264446) (xy 131.696406 130.082127) (xy 131.759641 129.887511) - (xy 131.765192 129.852464) (xy 131.792968 129.797947) (xy 131.847484 129.770168) (xy 131.907917 129.779739) - (xy 131.951182 129.823002) (xy 131.957127 129.837356) (xy 132.011773 130.005538) (xy 132.011775 130.005541) - (xy 132.073763 130.127202) (xy 132.090418 130.159888) (xy 132.192236 130.300028) (xy 132.314722 130.422514) - (xy 132.454862 130.524332) (xy 132.609205 130.602973) (xy 132.609207 130.602973) (xy 132.609208 130.602974) - (xy 132.609211 130.602976) (xy 132.773943 130.656501) (xy 132.773947 130.656502) (xy 132.945036 130.6836) - (xy 132.945039 130.6836) (xy 133.118264 130.6836) (xy 133.289352 130.656502) (xy 133.289356 130.656501) - (xy 133.454088 130.602976) (xy 133.45409 130.602974) (xy 133.454095 130.602973) (xy 133.608438 130.524332) - (xy 133.748578 130.422514) (xy 133.871064 130.300028) (xy 133.972882 130.159888) (xy 134.051523 130.005545) - (xy 134.051524 130.00554) (xy 134.051526 130.005538) (xy 134.105051 129.840806) (xy 134.105052 129.840802) - (xy 134.13215 129.669714) (xy 134.13215 129.496485) (xy 137.01115 129.496485) (xy 137.01115 129.669714) - (xy 137.038247 129.840802) (xy 137.038248 129.840806) (xy 137.091773 130.005538) (xy 137.091775 130.005541) - (xy 137.153763 130.127202) (xy 137.170418 130.159888) (xy 137.272236 130.300028) (xy 137.394722 130.422514) - (xy 137.534862 130.524332) (xy 137.689205 130.602973) (xy 137.689207 130.602973) (xy 137.689208 130.602974) - (xy 137.689211 130.602976) (xy 137.853943 130.656501) (xy 137.853947 130.656502) (xy 138.025036 130.6836) - (xy 138.025039 130.6836) (xy 138.198264 130.6836) (xy 138.369352 130.656502) (xy 138.369356 130.656501) - (xy 138.534088 130.602976) (xy 138.53409 130.602974) (xy 138.534095 130.602973) (xy 138.688438 130.524332) - (xy 138.828578 130.422514) (xy 138.951064 130.300028) (xy 139.052882 130.159888) (xy 139.131523 130.005545) - (xy 139.131524 130.00554) (xy 139.131526 130.005538) (xy 139.185051 129.840806) (xy 139.185052 129.840802) - (xy 139.21215 129.669714) (xy 139.21215 129.496485) (xy 139.55115 129.496485) (xy 139.55115 129.669714) - (xy 139.578247 129.840802) (xy 139.578248 129.840806) (xy 139.631773 130.005538) (xy 139.631775 130.005541) - (xy 139.693763 130.127202) (xy 139.710418 130.159888) (xy 139.812236 130.300028) (xy 139.934722 130.422514) - (xy 140.074862 130.524332) (xy 140.229205 130.602973) (xy 140.229207 130.602973) (xy 140.229208 130.602974) - (xy 140.229211 130.602976) (xy 140.393943 130.656501) (xy 140.393947 130.656502) (xy 140.565036 130.6836) - (xy 140.565039 130.6836) (xy 140.738264 130.6836) (xy 140.909352 130.656502) (xy 140.909356 130.656501) - (xy 141.074088 130.602976) (xy 141.07409 130.602974) (xy 141.074095 130.602973) (xy 141.228438 130.524332) - (xy 141.368578 130.422514) (xy 141.491064 130.300028) (xy 141.592882 130.159888) (xy 141.671523 130.005545) - (xy 141.671524 130.00554) (xy 141.671526 130.005538) (xy 141.725051 129.840806) (xy 141.725052 129.840802) - (xy 141.75215 129.669714) (xy 141.75215 129.496485) (xy 142.09115 129.496485) (xy 142.09115 129.669714) - (xy 142.118247 129.840802) (xy 142.118248 129.840806) (xy 142.171773 130.005538) (xy 142.171775 130.005541) - (xy 142.233763 130.127202) (xy 142.250418 130.159888) (xy 142.352236 130.300028) (xy 142.474722 130.422514) - (xy 142.614862 130.524332) (xy 142.769205 130.602973) (xy 142.769207 130.602973) (xy 142.769208 130.602974) - (xy 142.769211 130.602976) (xy 142.933943 130.656501) (xy 142.933947 130.656502) (xy 143.105036 130.6836) - (xy 143.105039 130.6836) (xy 143.278264 130.6836) (xy 143.449352 130.656502) (xy 143.449356 130.656501) - (xy 143.614088 130.602976) (xy 143.61409 130.602974) (xy 143.614095 130.602973) (xy 143.768438 130.524332) - (xy 143.908578 130.422514) (xy 144.031064 130.300028) (xy 144.132882 130.159888) (xy 144.211523 130.005545) - (xy 144.211524 130.00554) (xy 144.211526 130.005538) (xy 144.265051 129.840806) (xy 144.265052 129.840802) - (xy 144.29215 129.669714) (xy 144.29215 129.496485) (xy 144.63115 129.496485) (xy 144.63115 129.669714) - (xy 144.658247 129.840802) (xy 144.658248 129.840806) (xy 144.711773 130.005538) (xy 144.711775 130.005541) - (xy 144.773763 130.127202) (xy 144.790418 130.159888) (xy 144.892236 130.300028) (xy 145.014722 130.422514) - (xy 145.154862 130.524332) (xy 145.309205 130.602973) (xy 145.309207 130.602973) (xy 145.309208 130.602974) - (xy 145.309211 130.602976) (xy 145.473943 130.656501) (xy 145.473947 130.656502) (xy 145.645036 130.6836) - (xy 145.645039 130.6836) (xy 145.818264 130.6836) (xy 145.989352 130.656502) (xy 145.989356 130.656501) - (xy 146.154088 130.602976) (xy 146.15409 130.602974) (xy 146.154095 130.602973) (xy 146.308438 130.524332) - (xy 146.448578 130.422514) (xy 146.571064 130.300028) (xy 146.672882 130.159888) (xy 146.751523 130.005545) - (xy 146.751524 130.00554) (xy 146.751526 130.005538) (xy 146.805051 129.840806) (xy 146.805052 129.840802) - (xy 146.83215 129.669714) (xy 146.83215 129.496485) (xy 147.17115 129.496485) (xy 147.17115 129.669714) - (xy 147.198247 129.840802) (xy 147.198248 129.840806) (xy 147.251773 130.005538) (xy 147.251775 130.005541) - (xy 147.313763 130.127202) (xy 147.330418 130.159888) (xy 147.432236 130.300028) (xy 147.554722 130.422514) - (xy 147.694862 130.524332) (xy 147.849205 130.602973) (xy 147.849207 130.602973) (xy 147.849208 130.602974) - (xy 147.849211 130.602976) (xy 148.013943 130.656501) (xy 148.013947 130.656502) (xy 148.185036 130.6836) - (xy 148.185039 130.6836) (xy 148.358264 130.6836) (xy 148.529352 130.656502) (xy 148.529356 130.656501) - (xy 148.694088 130.602976) (xy 148.69409 130.602974) (xy 148.694095 130.602973) (xy 148.848438 130.524332) - (xy 148.988578 130.422514) (xy 149.111064 130.300028) (xy 149.212882 130.159888) (xy 149.291523 130.005545) - (xy 149.291524 130.00554) (xy 149.291526 130.005538) (xy 149.345051 129.840806) (xy 149.345052 129.840802) - (xy 149.37215 129.669714) (xy 149.37215 129.496485) (xy 149.71115 129.496485) (xy 149.71115 129.669714) - (xy 149.738247 129.840802) (xy 149.738248 129.840806) (xy 149.791773 130.005538) (xy 149.791775 130.005541) - (xy 149.853763 130.127202) (xy 149.870418 130.159888) (xy 149.972236 130.300028) (xy 150.094722 130.422514) - (xy 150.234862 130.524332) (xy 150.389205 130.602973) (xy 150.389207 130.602973) (xy 150.389208 130.602974) - (xy 150.389211 130.602976) (xy 150.553943 130.656501) (xy 150.553947 130.656502) (xy 150.725036 130.6836) - (xy 150.725039 130.6836) (xy 150.898264 130.6836) (xy 151.069352 130.656502) (xy 151.069356 130.656501) - (xy 151.234088 130.602976) (xy 151.23409 130.602974) (xy 151.234095 130.602973) (xy 151.388438 130.524332) - (xy 151.528578 130.422514) (xy 151.651064 130.300028) (xy 151.752882 130.159888) (xy 151.831523 130.005545) - (xy 151.831524 130.00554) (xy 151.831526 130.005538) (xy 151.885051 129.840806) (xy 151.885052 129.840802) - (xy 151.91215 129.669714) (xy 151.91215 129.496485) (xy 151.885052 129.325397) (xy 151.885051 129.325393) - (xy 151.831526 129.160661) (xy 151.831524 129.160658) (xy 151.831523 129.160657) (xy 151.831523 129.160655) - (xy 151.752882 129.006312) (xy 151.651064 128.866172) (xy 151.528578 128.743686) (xy 151.388438 128.641868) - (xy 151.388437 128.641867) (xy 151.388435 128.641866) (xy 151.234091 128.563225) (xy 151.234088 128.563223) - (xy 151.069356 128.509698) (xy 151.069352 128.509697) (xy 150.898264 128.4826) (xy 150.898261 128.4826) - (xy 150.725039 128.4826) (xy 150.725036 128.4826) (xy 150.553947 128.509697) (xy 150.553943 128.509698) - (xy 150.389211 128.563223) (xy 150.389208 128.563225) (xy 150.234864 128.641866) (xy 150.094723 128.743685) - (xy 149.972235 128.866173) (xy 149.870416 129.006314) (xy 149.791775 129.160658) (xy 149.791773 129.160661) - (xy 149.738248 129.325393) (xy 149.738247 129.325397) (xy 149.71115 129.496485) (xy 149.37215 129.496485) - (xy 149.345052 129.325397) (xy 149.345051 129.325393) (xy 149.291526 129.160661) (xy 149.291524 129.160658) - (xy 149.291523 129.160657) (xy 149.291523 129.160655) (xy 149.212882 129.006312) (xy 149.111064 128.866172) - (xy 148.988578 128.743686) (xy 148.848438 128.641868) (xy 148.848437 128.641867) (xy 148.848435 128.641866) - (xy 148.694091 128.563225) (xy 148.694088 128.563223) (xy 148.529356 128.509698) (xy 148.529352 128.509697) - (xy 148.358264 128.4826) (xy 148.358261 128.4826) (xy 148.185039 128.4826) (xy 148.185036 128.4826) - (xy 148.013947 128.509697) (xy 148.013943 128.509698) (xy 147.849211 128.563223) (xy 147.849208 128.563225) - (xy 147.694864 128.641866) (xy 147.554723 128.743685) (xy 147.432235 128.866173) (xy 147.330416 129.006314) - (xy 147.251775 129.160658) (xy 147.251773 129.160661) (xy 147.198248 129.325393) (xy 147.198247 129.325397) - (xy 147.17115 129.496485) (xy 146.83215 129.496485) (xy 146.805052 129.325397) (xy 146.805051 129.325393) - (xy 146.751526 129.160661) (xy 146.751524 129.160658) (xy 146.751523 129.160657) (xy 146.751523 129.160655) - (xy 146.672882 129.006312) (xy 146.571064 128.866172) (xy 146.448578 128.743686) (xy 146.308438 128.641868) - (xy 146.308437 128.641867) (xy 146.308435 128.641866) (xy 146.154091 128.563225) (xy 146.154088 128.563223) - (xy 145.989356 128.509698) (xy 145.989352 128.509697) (xy 145.818264 128.4826) (xy 145.818261 128.4826) - (xy 145.645039 128.4826) (xy 145.645036 128.4826) (xy 145.473947 128.509697) (xy 145.473943 128.509698) - (xy 145.309211 128.563223) (xy 145.309208 128.563225) (xy 145.154864 128.641866) (xy 145.014723 128.743685) - (xy 144.892235 128.866173) (xy 144.790416 129.006314) (xy 144.711775 129.160658) (xy 144.711773 129.160661) - (xy 144.658248 129.325393) (xy 144.658247 129.325397) (xy 144.63115 129.496485) (xy 144.29215 129.496485) - (xy 144.265052 129.325397) (xy 144.265051 129.325393) (xy 144.211526 129.160661) (xy 144.211524 129.160658) - (xy 144.211523 129.160657) (xy 144.211523 129.160655) (xy 144.132882 129.006312) (xy 144.031064 128.866172) - (xy 143.908578 128.743686) (xy 143.768438 128.641868) (xy 143.768437 128.641867) (xy 143.768435 128.641866) - (xy 143.614091 128.563225) (xy 143.614088 128.563223) (xy 143.449356 128.509698) (xy 143.449352 128.509697) - (xy 143.278264 128.4826) (xy 143.278261 128.4826) (xy 143.105039 128.4826) (xy 143.105036 128.4826) - (xy 142.933947 128.509697) (xy 142.933943 128.509698) (xy 142.769211 128.563223) (xy 142.769208 128.563225) - (xy 142.614864 128.641866) (xy 142.474723 128.743685) (xy 142.352235 128.866173) (xy 142.250416 129.006314) - (xy 142.171775 129.160658) (xy 142.171773 129.160661) (xy 142.118248 129.325393) (xy 142.118247 129.325397) - (xy 142.09115 129.496485) (xy 141.75215 129.496485) (xy 141.725052 129.325397) (xy 141.725051 129.325393) - (xy 141.671526 129.160661) (xy 141.671524 129.160658) (xy 141.671523 129.160657) (xy 141.671523 129.160655) - (xy 141.592882 129.006312) (xy 141.491064 128.866172) (xy 141.368578 128.743686) (xy 141.228438 128.641868) - (xy 141.228437 128.641867) (xy 141.228435 128.641866) (xy 141.074091 128.563225) (xy 141.074088 128.563223) - (xy 140.909356 128.509698) (xy 140.909352 128.509697) (xy 140.738264 128.4826) (xy 140.738261 128.4826) - (xy 140.565039 128.4826) (xy 140.565036 128.4826) (xy 140.393947 128.509697) (xy 140.393943 128.509698) - (xy 140.229211 128.563223) (xy 140.229208 128.563225) (xy 140.074864 128.641866) (xy 139.934723 128.743685) - (xy 139.812235 128.866173) (xy 139.710416 129.006314) (xy 139.631775 129.160658) (xy 139.631773 129.160661) - (xy 139.578248 129.325393) (xy 139.578247 129.325397) (xy 139.55115 129.496485) (xy 139.21215 129.496485) - (xy 139.185052 129.325397) (xy 139.185051 129.325393) (xy 139.131526 129.160661) (xy 139.131524 129.160658) - (xy 139.131523 129.160657) (xy 139.131523 129.160655) (xy 139.052882 129.006312) (xy 138.951064 128.866172) - (xy 138.828578 128.743686) (xy 138.688438 128.641868) (xy 138.688437 128.641867) (xy 138.688435 128.641866) - (xy 138.534091 128.563225) (xy 138.534088 128.563223) (xy 138.369356 128.509698) (xy 138.369352 128.509697) - (xy 138.198264 128.4826) (xy 138.198261 128.4826) (xy 138.025039 128.4826) (xy 138.025036 128.4826) - (xy 137.853947 128.509697) (xy 137.853943 128.509698) (xy 137.689211 128.563223) (xy 137.689208 128.563225) - (xy 137.534864 128.641866) (xy 137.394723 128.743685) (xy 137.272235 128.866173) (xy 137.170416 129.006314) - (xy 137.091775 129.160658) (xy 137.091773 129.160661) (xy 137.038248 129.325393) (xy 137.038247 129.325397) - (xy 137.01115 129.496485) (xy 134.13215 129.496485) (xy 134.105052 129.325397) (xy 134.105051 129.325393) - (xy 134.051526 129.160661) (xy 134.051524 129.160658) (xy 134.051523 129.160657) (xy 134.051523 129.160655) - (xy 133.972882 129.006312) (xy 133.871064 128.866172) (xy 133.748578 128.743686) (xy 133.608438 128.641868) - (xy 133.608437 128.641867) (xy 133.608435 128.641866) (xy 133.454091 128.563225) (xy 133.454088 128.563223) - (xy 133.289356 128.509698) (xy 133.289352 128.509697) (xy 133.118264 128.4826) (xy 133.118261 128.4826) - (xy 132.945039 128.4826) (xy 132.945036 128.4826) (xy 132.773947 128.509697) (xy 132.773943 128.509698) - (xy 132.609211 128.563223) (xy 132.609208 128.563225) (xy 132.454864 128.641866) (xy 132.314723 128.743685) - (xy 132.192235 128.866173) (xy 132.090416 129.006314) (xy 132.011775 129.160658) (xy 132.011773 129.160661) - (xy 131.957127 129.328843) (xy 131.921163 129.378343) (xy 131.862972 129.39725) (xy 131.804782 129.378342) - (xy 131.768818 129.328842) (xy 131.765192 129.313736) (xy 131.759641 129.278687) (xy 131.696406 129.084072) + (xy 131.483235 130.429991) (xy 131.603511 130.264446) (xy 131.696406 130.082127) (xy 131.75964 129.887514) + (xy 131.768259 129.8331) (xy 130.924662 129.8331) (xy 130.957575 129.776093) (xy 130.99165 129.648926) + (xy 130.99165 129.517274) (xy 130.984203 129.489481) (xy 132.08115 129.489481) (xy 132.08115 129.676718) + (xy 132.117676 129.860349) (xy 132.189327 130.033329) (xy 132.189331 130.033338) (xy 132.263715 130.144659) + (xy 132.293348 130.189008) (xy 132.425742 130.321402) (xy 132.492113 130.365749) (xy 132.581411 130.425418) + (xy 132.581417 130.42542) (xy 132.581419 130.425422) (xy 132.754399 130.497073) (xy 132.938034 130.5336) + (xy 132.938035 130.5336) (xy 133.125265 130.5336) (xy 133.125266 130.5336) (xy 133.308901 130.497073) + (xy 133.481881 130.425422) (xy 133.481884 130.425419) (xy 133.481888 130.425418) (xy 133.526837 130.395382) + (xy 133.637558 130.321402) (xy 133.769952 130.189008) (xy 133.863486 130.049025) (xy 133.873968 130.033338) + (xy 133.873969 130.033334) (xy 133.873972 130.033331) (xy 133.945623 129.860351) (xy 133.98215 129.676716) + (xy 133.98215 129.489484) (xy 133.982149 129.489481) (xy 137.16115 129.489481) (xy 137.16115 129.676718) + (xy 137.197676 129.860349) (xy 137.269327 130.033329) (xy 137.269331 130.033338) (xy 137.343715 130.144659) + (xy 137.373348 130.189008) (xy 137.505742 130.321402) (xy 137.572113 130.365749) (xy 137.661411 130.425418) + (xy 137.661417 130.42542) (xy 137.661419 130.425422) (xy 137.834399 130.497073) (xy 138.018034 130.5336) + (xy 138.018035 130.5336) (xy 138.205265 130.5336) (xy 138.205266 130.5336) (xy 138.388901 130.497073) + (xy 138.561881 130.425422) (xy 138.561884 130.425419) (xy 138.561888 130.425418) (xy 138.606837 130.395382) + (xy 138.717558 130.321402) (xy 138.849952 130.189008) (xy 138.943486 130.049025) (xy 138.953968 130.033338) + (xy 138.953969 130.033334) (xy 138.953972 130.033331) (xy 139.025623 129.860351) (xy 139.06215 129.676716) + (xy 139.06215 129.489484) (xy 139.062149 129.489481) (xy 139.70115 129.489481) (xy 139.70115 129.676718) + (xy 139.737676 129.860349) (xy 139.809327 130.033329) (xy 139.809331 130.033338) (xy 139.883715 130.144659) + (xy 139.913348 130.189008) (xy 140.045742 130.321402) (xy 140.112113 130.365749) (xy 140.201411 130.425418) + (xy 140.201417 130.42542) (xy 140.201419 130.425422) (xy 140.374399 130.497073) (xy 140.558034 130.5336) + (xy 140.558035 130.5336) (xy 140.745265 130.5336) (xy 140.745266 130.5336) (xy 140.928901 130.497073) + (xy 141.101881 130.425422) (xy 141.101884 130.425419) (xy 141.101888 130.425418) (xy 141.146837 130.395382) + (xy 141.257558 130.321402) (xy 141.389952 130.189008) (xy 141.483486 130.049025) (xy 141.493968 130.033338) + (xy 141.493969 130.033334) (xy 141.493972 130.033331) (xy 141.565623 129.860351) (xy 141.60215 129.676716) + (xy 141.60215 129.489484) (xy 141.602149 129.489481) (xy 142.24115 129.489481) (xy 142.24115 129.676718) + (xy 142.277676 129.860349) (xy 142.349327 130.033329) (xy 142.349331 130.033338) (xy 142.423715 130.144659) + (xy 142.453348 130.189008) (xy 142.585742 130.321402) (xy 142.652113 130.365749) (xy 142.741411 130.425418) + (xy 142.741417 130.42542) (xy 142.741419 130.425422) (xy 142.914399 130.497073) (xy 143.098034 130.5336) + (xy 143.098035 130.5336) (xy 143.285265 130.5336) (xy 143.285266 130.5336) (xy 143.468901 130.497073) + (xy 143.641881 130.425422) (xy 143.641884 130.425419) (xy 143.641888 130.425418) (xy 143.686837 130.395382) + (xy 143.797558 130.321402) (xy 143.929952 130.189008) (xy 144.023486 130.049025) (xy 144.033968 130.033338) + (xy 144.033969 130.033334) (xy 144.033972 130.033331) (xy 144.105623 129.860351) (xy 144.14215 129.676716) + (xy 144.14215 129.489484) (xy 144.142149 129.489481) (xy 144.78115 129.489481) (xy 144.78115 129.676718) + (xy 144.817676 129.860349) (xy 144.889327 130.033329) (xy 144.889331 130.033338) (xy 144.963715 130.144659) + (xy 144.993348 130.189008) (xy 145.125742 130.321402) (xy 145.192113 130.365749) (xy 145.281411 130.425418) + (xy 145.281417 130.42542) (xy 145.281419 130.425422) (xy 145.454399 130.497073) (xy 145.638034 130.5336) + (xy 145.638035 130.5336) (xy 145.825265 130.5336) (xy 145.825266 130.5336) (xy 146.008901 130.497073) + (xy 146.181881 130.425422) (xy 146.181884 130.425419) (xy 146.181888 130.425418) (xy 146.226837 130.395382) + (xy 146.337558 130.321402) (xy 146.469952 130.189008) (xy 146.563486 130.049025) (xy 146.573968 130.033338) + (xy 146.573969 130.033334) (xy 146.573972 130.033331) (xy 146.645623 129.860351) (xy 146.68215 129.676716) + (xy 146.68215 129.489484) (xy 146.682149 129.489481) (xy 147.32115 129.489481) (xy 147.32115 129.676718) + (xy 147.357676 129.860349) (xy 147.429327 130.033329) (xy 147.429331 130.033338) (xy 147.503715 130.144659) + (xy 147.533348 130.189008) (xy 147.665742 130.321402) (xy 147.732113 130.365749) (xy 147.821411 130.425418) + (xy 147.821417 130.42542) (xy 147.821419 130.425422) (xy 147.994399 130.497073) (xy 148.178034 130.5336) + (xy 148.178035 130.5336) (xy 148.365265 130.5336) (xy 148.365266 130.5336) (xy 148.548901 130.497073) + (xy 148.721881 130.425422) (xy 148.721884 130.425419) (xy 148.721888 130.425418) (xy 148.766837 130.395382) + (xy 148.877558 130.321402) (xy 149.009952 130.189008) (xy 149.103486 130.049025) (xy 149.113968 130.033338) + (xy 149.113969 130.033334) (xy 149.113972 130.033331) (xy 149.185623 129.860351) (xy 149.22215 129.676716) + (xy 149.22215 129.489484) (xy 149.222149 129.489481) (xy 149.86115 129.489481) (xy 149.86115 129.676718) + (xy 149.897676 129.860349) (xy 149.969327 130.033329) (xy 149.969331 130.033338) (xy 150.043715 130.144659) + (xy 150.073348 130.189008) (xy 150.205742 130.321402) (xy 150.272113 130.365749) (xy 150.361411 130.425418) + (xy 150.361417 130.42542) (xy 150.361419 130.425422) (xy 150.534399 130.497073) (xy 150.718034 130.5336) + (xy 150.718035 130.5336) (xy 150.905265 130.5336) (xy 150.905266 130.5336) (xy 151.088901 130.497073) + (xy 151.261881 130.425422) (xy 151.261884 130.425419) (xy 151.261888 130.425418) (xy 151.306837 130.395382) + (xy 151.417558 130.321402) (xy 151.549952 130.189008) (xy 151.643486 130.049025) (xy 151.653968 130.033338) + (xy 151.653969 130.033334) (xy 151.653972 130.033331) (xy 151.725623 129.860351) (xy 151.76215 129.676716) + (xy 151.76215 129.489484) (xy 151.725623 129.305849) (xy 151.653972 129.132869) (xy 151.65397 129.132867) + (xy 151.653968 129.132861) (xy 151.58156 129.024497) (xy 151.549952 128.977192) (xy 151.417558 128.844798) + (xy 151.373209 128.815165) (xy 151.261888 128.740781) (xy 151.261879 128.740777) (xy 151.088899 128.669126) + (xy 150.905268 128.6326) (xy 150.905266 128.6326) (xy 150.718034 128.6326) (xy 150.718031 128.6326) + (xy 150.5344 128.669126) (xy 150.36142 128.740777) (xy 150.361411 128.740781) (xy 150.205742 128.844798) + (xy 150.205738 128.844801) (xy 150.073351 128.977188) (xy 150.073348 128.977192) (xy 149.969331 129.132861) + (xy 149.969327 129.13287) (xy 149.897676 129.30585) (xy 149.86115 129.489481) (xy 149.222149 129.489481) + (xy 149.185623 129.305849) (xy 149.113972 129.132869) (xy 149.11397 129.132867) (xy 149.113968 129.132861) + (xy 149.04156 129.024497) (xy 149.009952 128.977192) (xy 148.877558 128.844798) (xy 148.833209 128.815165) + (xy 148.721888 128.740781) (xy 148.721879 128.740777) (xy 148.548899 128.669126) (xy 148.365268 128.6326) + (xy 148.365266 128.6326) (xy 148.178034 128.6326) (xy 148.178031 128.6326) (xy 147.9944 128.669126) + (xy 147.82142 128.740777) (xy 147.821411 128.740781) (xy 147.665742 128.844798) (xy 147.665738 128.844801) + (xy 147.533351 128.977188) (xy 147.533348 128.977192) (xy 147.429331 129.132861) (xy 147.429327 129.13287) + (xy 147.357676 129.30585) (xy 147.32115 129.489481) (xy 146.682149 129.489481) (xy 146.645623 129.305849) + (xy 146.573972 129.132869) (xy 146.57397 129.132867) (xy 146.573968 129.132861) (xy 146.50156 129.024497) + (xy 146.469952 128.977192) (xy 146.337558 128.844798) (xy 146.293209 128.815165) (xy 146.181888 128.740781) + (xy 146.181879 128.740777) (xy 146.008899 128.669126) (xy 145.825268 128.6326) (xy 145.825266 128.6326) + (xy 145.638034 128.6326) (xy 145.638031 128.6326) (xy 145.4544 128.669126) (xy 145.28142 128.740777) + (xy 145.281411 128.740781) (xy 145.125742 128.844798) (xy 145.125738 128.844801) (xy 144.993351 128.977188) + (xy 144.993348 128.977192) (xy 144.889331 129.132861) (xy 144.889327 129.13287) (xy 144.817676 129.30585) + (xy 144.78115 129.489481) (xy 144.142149 129.489481) (xy 144.105623 129.305849) (xy 144.033972 129.132869) + (xy 144.03397 129.132867) (xy 144.033968 129.132861) (xy 143.96156 129.024497) (xy 143.929952 128.977192) + (xy 143.797558 128.844798) (xy 143.753209 128.815165) (xy 143.641888 128.740781) (xy 143.641879 128.740777) + (xy 143.468899 128.669126) (xy 143.285268 128.6326) (xy 143.285266 128.6326) (xy 143.098034 128.6326) + (xy 143.098031 128.6326) (xy 142.9144 128.669126) (xy 142.74142 128.740777) (xy 142.741411 128.740781) + (xy 142.585742 128.844798) (xy 142.585738 128.844801) (xy 142.453351 128.977188) (xy 142.453348 128.977192) + (xy 142.349331 129.132861) (xy 142.349327 129.13287) (xy 142.277676 129.30585) (xy 142.24115 129.489481) + (xy 141.602149 129.489481) (xy 141.565623 129.305849) (xy 141.493972 129.132869) (xy 141.49397 129.132867) + (xy 141.493968 129.132861) (xy 141.42156 129.024497) (xy 141.389952 128.977192) (xy 141.257558 128.844798) + (xy 141.213209 128.815165) (xy 141.101888 128.740781) (xy 141.101879 128.740777) (xy 140.928899 128.669126) + (xy 140.745268 128.6326) (xy 140.745266 128.6326) (xy 140.558034 128.6326) (xy 140.558031 128.6326) + (xy 140.3744 128.669126) (xy 140.20142 128.740777) (xy 140.201411 128.740781) (xy 140.045742 128.844798) + (xy 140.045738 128.844801) (xy 139.913351 128.977188) (xy 139.913348 128.977192) (xy 139.809331 129.132861) + (xy 139.809327 129.13287) (xy 139.737676 129.30585) (xy 139.70115 129.489481) (xy 139.062149 129.489481) + (xy 139.025623 129.305849) (xy 138.953972 129.132869) (xy 138.95397 129.132867) (xy 138.953968 129.132861) + (xy 138.88156 129.024497) (xy 138.849952 128.977192) (xy 138.717558 128.844798) (xy 138.673209 128.815165) + (xy 138.561888 128.740781) (xy 138.561879 128.740777) (xy 138.388899 128.669126) (xy 138.205268 128.6326) + (xy 138.205266 128.6326) (xy 138.018034 128.6326) (xy 138.018031 128.6326) (xy 137.8344 128.669126) + (xy 137.66142 128.740777) (xy 137.661411 128.740781) (xy 137.505742 128.844798) (xy 137.505738 128.844801) + (xy 137.373351 128.977188) (xy 137.373348 128.977192) (xy 137.269331 129.132861) (xy 137.269327 129.13287) + (xy 137.197676 129.30585) (xy 137.16115 129.489481) (xy 133.982149 129.489481) (xy 133.945623 129.305849) + (xy 133.873972 129.132869) (xy 133.87397 129.132867) (xy 133.873968 129.132861) (xy 133.80156 129.024497) + (xy 133.769952 128.977192) (xy 133.637558 128.844798) (xy 133.593209 128.815165) (xy 133.481888 128.740781) + (xy 133.481879 128.740777) (xy 133.308899 128.669126) (xy 133.125268 128.6326) (xy 133.125266 128.6326) + (xy 132.938034 128.6326) (xy 132.938031 128.6326) (xy 132.7544 128.669126) (xy 132.58142 128.740777) + (xy 132.581411 128.740781) (xy 132.425742 128.844798) (xy 132.425738 128.844801) (xy 132.293351 128.977188) + (xy 132.293348 128.977192) (xy 132.189331 129.132861) (xy 132.189327 129.13287) (xy 132.117676 129.30585) + (xy 132.08115 129.489481) (xy 130.984203 129.489481) (xy 130.957575 129.390107) (xy 130.924662 129.3331) + (xy 131.768259 129.3331) (xy 131.768259 129.333099) (xy 131.75964 129.278685) (xy 131.696406 129.084072) (xy 131.603511 128.901753) (xy 131.483235 128.736208) (xy 131.338541 128.591514) (xy 131.172996 128.471238) (xy 130.990677 128.378343) (xy 130.796064 128.315109) (xy 130.74165 128.30649) (xy 130.74165 129.150088) (xy 130.684643 129.117175) (xy 130.557476 129.0831) (xy 130.425824 129.0831) (xy 130.298657 129.117175) @@ -47721,1539 +55915,1397 @@ (xy 127.885824 129.0831) (xy 127.758657 129.117175) (xy 127.70165 129.150088) (xy 127.70165 128.306491) (xy 127.701649 128.30649) (xy 127.647235 128.315109) (xy 127.452622 128.378343) (xy 127.270303 128.471238) (xy 127.104758 128.591514) (xy 126.960064 128.736208) (xy 126.839788 128.901753) (xy 126.746893 129.084072) - (xy 126.683659 129.278686) (xy 126.678107 129.313738) (xy 126.650329 129.368254) (xy 126.595812 129.396031) - (xy 126.53538 129.386459) (xy 126.492116 129.343194) (xy 126.486171 129.328843) (xy 126.469031 129.276093) - (xy 126.431523 129.160655) (xy 126.352882 129.006312) (xy 126.251064 128.866172) (xy 126.128578 128.743686) - (xy 125.988438 128.641868) (xy 125.988437 128.641867) (xy 125.988435 128.641866) (xy 125.834091 128.563225) - (xy 125.834088 128.563223) (xy 125.669356 128.509698) (xy 125.669352 128.509697) (xy 125.498264 128.4826) - (xy 125.498261 128.4826) (xy 125.325039 128.4826) (xy 125.325036 128.4826) (xy 125.153947 128.509697) - (xy 125.153943 128.509698) (xy 124.989211 128.563223) (xy 124.989208 128.563225) (xy 124.834864 128.641866) - (xy 124.694723 128.743685) (xy 124.572235 128.866173) (xy 124.470416 129.006314) (xy 124.391775 129.160658) - (xy 124.391773 129.160661) (xy 124.338248 129.325393) (xy 124.338247 129.325397) (xy 124.31115 129.496485) - (xy 123.97215 129.496485) (xy 123.945052 129.325397) (xy 123.945051 129.325393) (xy 123.891526 129.160661) - (xy 123.891524 129.160658) (xy 123.891523 129.160657) (xy 123.891523 129.160655) (xy 123.812882 129.006312) - (xy 123.711064 128.866172) (xy 123.588578 128.743686) (xy 123.448438 128.641868) (xy 123.448437 128.641867) - (xy 123.448435 128.641866) (xy 123.294091 128.563225) (xy 123.294088 128.563223) (xy 123.129356 128.509698) - (xy 123.129352 128.509697) (xy 122.958264 128.4826) (xy 122.958261 128.4826) (xy 122.785039 128.4826) - (xy 122.785036 128.4826) (xy 122.613947 128.509697) (xy 122.613943 128.509698) (xy 122.449211 128.563223) - (xy 122.449208 128.563225) (xy 122.294864 128.641866) (xy 122.154723 128.743685) (xy 122.032235 128.866173) - (xy 121.930416 129.006314) (xy 121.851775 129.160658) (xy 121.851773 129.160661) (xy 121.798248 129.325393) - (xy 121.798247 129.325397) (xy 121.77115 129.496485) (xy 121.43215 129.496485) (xy 121.405052 129.325397) - (xy 121.405051 129.325393) (xy 121.351526 129.160661) (xy 121.351524 129.160658) (xy 121.351523 129.160657) - (xy 121.351523 129.160655) (xy 121.272882 129.006312) (xy 121.171064 128.866172) (xy 121.048578 128.743686) - (xy 120.908438 128.641868) (xy 120.908437 128.641867) (xy 120.908435 128.641866) (xy 120.754091 128.563225) - (xy 120.754088 128.563223) (xy 120.589356 128.509698) (xy 120.589352 128.509697) (xy 120.418264 128.4826) - (xy 120.418261 128.4826) (xy 120.245039 128.4826) (xy 120.245036 128.4826) (xy 120.073947 128.509697) - (xy 120.073943 128.509698) (xy 119.909211 128.563223) (xy 119.909208 128.563225) (xy 119.754864 128.641866) - (xy 119.614723 128.743685) (xy 119.492235 128.866173) (xy 119.390416 129.006314) (xy 119.311775 129.160658) - (xy 119.311773 129.160661) (xy 119.258248 129.325393) (xy 119.258247 129.325397) (xy 119.23115 129.496485) - (xy 118.89215 129.496485) (xy 118.865052 129.325397) (xy 118.865051 129.325393) (xy 118.811526 129.160661) - (xy 118.811524 129.160658) (xy 118.811523 129.160657) (xy 118.811523 129.160655) (xy 118.732882 129.006312) - (xy 118.631064 128.866172) (xy 118.508578 128.743686) (xy 118.368438 128.641868) (xy 118.368437 128.641867) - (xy 118.368435 128.641866) (xy 118.214091 128.563225) (xy 118.214088 128.563223) (xy 118.049356 128.509698) - (xy 118.049352 128.509697) (xy 117.878264 128.4826) (xy 117.878261 128.4826) (xy 117.705039 128.4826) - (xy 117.705036 128.4826) (xy 117.533947 128.509697) (xy 117.533943 128.509698) (xy 117.369211 128.563223) - (xy 117.369208 128.563225) (xy 117.214864 128.641866) (xy 117.074723 128.743685) (xy 116.952235 128.866173) - (xy 116.850416 129.006314) (xy 116.771775 129.160658) (xy 116.771773 129.160661) (xy 116.718248 129.325393) - (xy 116.718247 129.325397) (xy 116.69115 129.496485) (xy 116.352149 129.496485) (xy 116.352149 128.738236) - (xy 116.349235 128.713109) (xy 116.303856 128.610335) (xy 116.224415 128.530894) (xy 116.121641 128.485515) - (xy 116.12164 128.485514) (xy 116.121638 128.485514) (xy 116.096518 128.4826) (xy 114.406789 128.4826) - (xy 114.406786 128.482601) (xy 114.381659 128.485514) (xy 114.278885 128.530894) (xy 114.199444 128.610335) - (xy 114.154064 128.713111) (xy 114.15115 128.73823) (xy 80.850789 128.73823) (xy 80.84439 122.407459) - (xy 80.84099 119.043609) (xy 80.840544 118.602791) (xy 80.840514 118.573099) (xy 208.714418 118.573099) - (xy 208.714419 118.5731) (xy 209.758638 118.5731) (xy 209.725725 118.630107) (xy 209.69165 118.757274) - (xy 209.69165 118.888926) (xy 209.725725 119.016093) (xy 209.758638 119.0731) (xy 208.714419 119.0731) - (xy 208.724891 119.139222) (xy 208.790554 119.341315) (xy 208.887025 119.530652) (xy 209.011927 119.702564) - (xy 209.162185 119.852822) (xy 209.334098 119.977724) (xy 209.366008 119.993983) (xy 209.409273 120.037248) - (xy 209.418844 120.09768) (xy 209.391067 120.152197) (xy 209.33655 120.179974) (xy 209.332869 120.180487) - (xy 209.310083 120.183223) (xy 209.16931 120.238737) (xy 209.169306 120.23874) (xy 209.048731 120.330175) - (xy 209.048725 120.330181) (xy 208.95729 120.450756) (xy 208.957287 120.45076) (xy 208.901773 120.591534) - (xy 208.89115 120.679993) (xy 208.89115 121.966206) (xy 208.901773 122.054665) (xy 208.957287 122.195439) - (xy 208.957288 122.195441) (xy 208.957289 122.195442) (xy 209.048728 122.316022) (xy 209.169308 122.407461) - (xy 209.169309 122.407461) (xy 209.16931 122.407462) (xy 209.239697 122.435219) (xy 209.310086 122.462977) - (xy 209.398548 122.4736) (xy 209.39855 122.4736) (xy 210.98475 122.4736) (xy 210.984752 122.4736) - (xy 211.073214 122.462977) (xy 211.213992 122.407461) (xy 211.334572 122.316022) (xy 211.426011 122.195442) - (xy 211.481527 122.054664) (xy 211.49215 121.966202) (xy 211.49215 120.679998) (xy 211.481527 120.591536) - (xy 211.426011 120.450758) (xy 211.334572 120.330178) (xy 211.213992 120.238739) (xy 211.213991 120.238738) - (xy 211.213989 120.238737) (xy 211.073216 120.183223) (xy 211.050431 120.180487) (xy 210.99491 120.154775) - (xy 210.965105 120.10134) (xy 210.972401 120.040591) (xy 211.014011 119.995733) (xy 211.017292 119.993983) - (xy 211.049199 119.977725) (xy 211.0492 119.977725) (xy 211.221114 119.852822) (xy 211.371372 119.702564) - (xy 211.496274 119.530652) (xy 211.592745 119.341315) (xy 211.658408 119.139222) (xy 211.668881 119.0731) - (xy 210.624662 119.0731) (xy 210.657575 119.016093) (xy 210.69165 118.888926) (xy 210.69165 118.757274) - (xy 210.657575 118.630107) (xy 210.624662 118.5731) (xy 211.668881 118.5731) (xy 211.668881 118.573099) - (xy 211.658408 118.506977) (xy 211.592745 118.304884) (xy 211.496274 118.115547) (xy 211.371372 117.943635) - (xy 211.221114 117.793377) (xy 211.049202 117.668475) (xy 210.859865 117.572004) (xy 210.657771 117.50634) - (xy 210.4479 117.4731) (xy 210.441651 117.4731) (xy 210.44165 117.473101) (xy 210.44165 118.390088) - (xy 210.384643 118.357175) (xy 210.257476 118.3231) (xy 210.125824 118.3231) (xy 209.998657 118.357175) - (xy 209.94165 118.390088) (xy 209.94165 117.473101) (xy 209.941649 117.4731) (xy 209.9354 117.4731) - (xy 209.725528 117.50634) (xy 209.523434 117.572004) (xy 209.334097 117.668475) (xy 209.162185 117.793377) - (xy 209.011927 117.943635) (xy 208.887025 118.115547) (xy 208.790554 118.304884) (xy 208.724891 118.506977) - (xy 208.714418 118.573099) (xy 80.840514 118.573099) (xy 80.839502 117.572004) (xy 80.838633 116.712143) - (xy 184.50215 116.712143) (xy 184.50215 116.870257) (xy 184.543073 117.022984) (xy 184.62213 117.159916) - (xy 184.733934 117.27172) (xy 184.870866 117.350777) (xy 185.023593 117.3917) (xy 185.023595 117.3917) - (xy 185.181705 117.3917) (xy 185.181707 117.3917) (xy 185.334434 117.350777) (xy 185.471366 117.27172) - (xy 185.58317 117.159916) (xy 185.662227 117.022984) (xy 185.70315 116.870257) (xy 185.70315 116.712143) - (xy 185.662227 116.559416) (xy 185.58317 116.422484) (xy 185.471366 116.31068) (xy 185.334434 116.231623) - (xy 185.181707 116.1907) (xy 185.023593 116.1907) (xy 184.870866 116.231623) (xy 184.733934 116.31068) - (xy 184.62213 116.422484) (xy 184.543073 116.559416) (xy 184.50215 116.712143) (xy 80.838633 116.712143) - (xy 80.83786 115.947843) (xy 186.49635 115.947843) (xy 186.49635 116.105957) (xy 186.537273 116.258684) - (xy 186.61633 116.395616) (xy 186.728134 116.50742) (xy 186.865066 116.586477) (xy 187.017793 116.6274) - (xy 187.017795 116.6274) (xy 187.175905 116.6274) (xy 187.175907 116.6274) (xy 187.328634 116.586477) - (xy 187.465566 116.50742) (xy 187.57737 116.395616) (xy 187.656427 116.258684) (xy 187.69735 116.105957) - (xy 187.69735 115.947843) (xy 187.656427 115.795116) (xy 187.57737 115.658184) (xy 187.465566 115.54638) - (xy 187.328634 115.467323) (xy 187.175907 115.4264) (xy 187.017793 115.4264) (xy 186.865066 115.467323) - (xy 186.728134 115.54638) (xy 186.61633 115.658184) (xy 186.537273 115.795116) (xy 186.49635 115.947843) - (xy 80.83786 115.947843) (xy 80.836913 115.010543) (xy 100.46975 115.010543) (xy 100.46975 115.168657) - (xy 100.510673 115.321384) (xy 100.58973 115.458316) (xy 100.701534 115.57012) (xy 100.838466 115.649177) - (xy 100.991193 115.6901) (xy 100.991195 115.6901) (xy 101.149305 115.6901) (xy 101.149307 115.6901) - (xy 101.302034 115.649177) (xy 101.438966 115.57012) (xy 101.55077 115.458316) (xy 101.629827 115.321384) - (xy 101.67075 115.168657) (xy 101.67075 115.010543) (xy 101.629827 114.857816) (xy 101.55077 114.720884) - (xy 101.438966 114.60908) (xy 101.302034 114.530023) (xy 101.149307 114.4891) (xy 100.991193 114.4891) - (xy 100.838466 114.530023) (xy 100.701534 114.60908) (xy 100.58973 114.720884) (xy 100.510673 114.857816) - (xy 100.46975 115.010543) (xy 80.836913 115.010543) (xy 80.8359 114.008143) (xy 169.13675 114.008143) - (xy 169.13675 114.166257) (xy 169.177673 114.318984) (xy 169.25673 114.455916) (xy 169.368534 114.56772) - (xy 169.505466 114.646777) (xy 169.658193 114.6877) (xy 169.658195 114.6877) (xy 169.816305 114.6877) - (xy 169.816307 114.6877) (xy 169.969034 114.646777) (xy 170.105966 114.56772) (xy 170.117643 114.556043) - (xy 184.65125 114.556043) (xy 184.65125 114.714157) (xy 184.692173 114.866884) (xy 184.77123 115.003816) - (xy 184.883034 115.11562) (xy 185.019966 115.194677) (xy 185.172693 115.2356) (xy 185.172695 115.2356) - (xy 185.330805 115.2356) (xy 185.330807 115.2356) (xy 185.483534 115.194677) (xy 185.620466 115.11562) - (xy 185.73227 115.003816) (xy 185.811327 114.866884) (xy 185.85225 114.714157) (xy 185.85225 114.673043) - (xy 192.37565 114.673043) (xy 192.37565 114.831157) (xy 192.416573 114.983884) (xy 192.49563 115.120816) - (xy 192.607434 115.23262) (xy 192.744366 115.311677) (xy 192.897093 115.3526) (xy 192.897095 115.3526) - (xy 193.055205 115.3526) (xy 193.055207 115.3526) (xy 193.207934 115.311677) (xy 193.344866 115.23262) - (xy 193.45667 115.120816) (xy 193.535727 114.983884) (xy 193.57665 114.831157) (xy 193.57665 114.673043) - (xy 193.535727 114.520316) (xy 193.45667 114.383384) (xy 193.344866 114.27158) (xy 193.207934 114.192523) - (xy 193.055207 114.1516) (xy 192.897093 114.1516) (xy 192.744366 114.192523) (xy 192.607434 114.27158) - (xy 192.49563 114.383384) (xy 192.416573 114.520316) (xy 192.37565 114.673043) (xy 185.85225 114.673043) - (xy 185.85225 114.556043) (xy 185.811327 114.403316) (xy 185.73227 114.266384) (xy 185.620466 114.15458) - (xy 185.483534 114.075523) (xy 185.330807 114.0346) (xy 185.172693 114.0346) (xy 185.019966 114.075523) - (xy 184.883034 114.15458) (xy 184.77123 114.266384) (xy 184.692173 114.403316) (xy 184.65125 114.556043) - (xy 170.117643 114.556043) (xy 170.21777 114.455916) (xy 170.296827 114.318984) (xy 170.33775 114.166257) - (xy 170.33775 114.008143) (xy 170.296827 113.855416) (xy 170.21777 113.718484) (xy 170.105966 113.60668) - (xy 169.969034 113.527623) (xy 169.818846 113.48738) (xy 169.81746 113.487008) (xy 169.816307 113.4867) - (xy 169.658193 113.4867) (xy 169.505466 113.527623) (xy 169.368534 113.60668) (xy 169.25673 113.718484) - (xy 169.177673 113.855416) (xy 169.13675 114.008143) (xy 80.8359 114.008143) (xy 80.83491 113.029343) - (xy 110.36885 113.029343) (xy 110.36885 113.187457) (xy 110.409773 113.340184) (xy 110.48883 113.477116) - (xy 110.600634 113.58892) (xy 110.737566 113.667977) (xy 110.890293 113.7089) (xy 110.890295 113.7089) - (xy 111.048405 113.7089) (xy 111.048407 113.7089) (xy 111.201134 113.667977) (xy 111.338066 113.58892) - (xy 111.44987 113.477116) (xy 111.528927 113.340184) (xy 111.547748 113.269943) (xy 126.03365 113.269943) - (xy 126.03365 113.428057) (xy 126.074573 113.580784) (xy 126.15363 113.717716) (xy 126.265434 113.82952) - (xy 126.402366 113.908577) (xy 126.555093 113.9495) (xy 126.555095 113.9495) (xy 126.713205 113.9495) - (xy 126.713207 113.9495) (xy 126.865934 113.908577) (xy 127.002866 113.82952) (xy 127.11467 113.717716) - (xy 127.193727 113.580784) (xy 127.23465 113.428057) (xy 127.23465 113.398243) (xy 171.01635 113.398243) - (xy 171.01635 113.556357) (xy 171.057273 113.709084) (xy 171.13633 113.846016) (xy 171.248134 113.95782) - (xy 171.385066 114.036877) (xy 171.537793 114.0778) (xy 171.537795 114.0778) (xy 171.695905 114.0778) - (xy 171.695907 114.0778) (xy 171.848634 114.036877) (xy 171.985566 113.95782) (xy 172.09737 113.846016) - (xy 172.176427 113.709084) (xy 172.21735 113.556357) (xy 172.21735 113.398243) (xy 172.176427 113.245516) - (xy 172.10633 113.124104) (xy 201.45115 113.124104) (xy 201.45115 113.262095) (xy 201.47807 113.397427) - (xy 201.47807 113.397429) (xy 201.530872 113.524906) (xy 201.530878 113.524917) (xy 201.607535 113.639641) - (xy 201.705108 113.737214) (xy 201.819832 113.813871) (xy 201.819843 113.813877) (xy 201.866933 113.833382) - (xy 201.947322 113.86668) (xy 202.082657 113.8936) (xy 202.082658 113.8936) (xy 202.220642 113.8936) - (xy 202.220643 113.8936) (xy 202.355978 113.86668) (xy 202.483461 113.813875) (xy 202.598192 113.737214) - (xy 202.695764 113.639642) (xy 202.772425 113.524911) (xy 202.82523 113.397428) (xy 202.85215 113.262093) - (xy 202.85215 113.124107) (xy 202.82523 112.988772) (xy 202.772425 112.861289) (xy 202.772424 112.861287) - (xy 202.772421 112.861282) (xy 202.695764 112.746558) (xy 202.598191 112.648985) (xy 202.483467 112.572328) - (xy 202.483456 112.572322) (xy 202.355978 112.51952) (xy 202.220645 112.4926) (xy 202.220643 112.4926) - (xy 202.082657 112.4926) (xy 202.082654 112.4926) (xy 201.947322 112.51952) (xy 201.94732 112.51952) - (xy 201.819843 112.572322) (xy 201.819832 112.572328) (xy 201.705108 112.648985) (xy 201.607535 112.746558) - (xy 201.530878 112.861282) (xy 201.530872 112.861293) (xy 201.47807 112.98877) (xy 201.47807 112.988772) - (xy 201.45115 113.124104) (xy 172.10633 113.124104) (xy 172.09737 113.108584) (xy 171.985566 112.99678) - (xy 171.848634 112.917723) (xy 171.695907 112.8768) (xy 171.537793 112.8768) (xy 171.385066 112.917723) - (xy 171.248134 112.99678) (xy 171.13633 113.108584) (xy 171.057273 113.245516) (xy 171.01635 113.398243) - (xy 127.23465 113.398243) (xy 127.23465 113.269943) (xy 127.193727 113.117216) (xy 127.11467 112.980284) - (xy 127.002866 112.86848) (xy 126.865934 112.789423) (xy 126.713207 112.7485) (xy 126.555093 112.7485) - (xy 126.402366 112.789423) (xy 126.265434 112.86848) (xy 126.15363 112.980284) (xy 126.074573 113.117216) - (xy 126.03365 113.269943) (xy 111.547748 113.269943) (xy 111.56985 113.187457) (xy 111.56985 113.029343) - (xy 111.528927 112.876616) (xy 111.44987 112.739684) (xy 111.338066 112.62788) (xy 111.201134 112.548823) - (xy 111.048407 112.5079) (xy 110.890293 112.5079) (xy 110.737566 112.548823) (xy 110.600634 112.62788) - (xy 110.48883 112.739684) (xy 110.409773 112.876616) (xy 110.36885 113.029343) (xy 80.83491 113.029343) - (xy 80.833368 111.503743) (xy 106.23145 111.503743) (xy 106.23145 111.661857) (xy 106.272373 111.814584) - (xy 106.35143 111.951516) (xy 106.463234 112.06332) (xy 106.600166 112.142377) (xy 106.752893 112.1833) - (xy 106.752895 112.1833) (xy 106.911005 112.1833) (xy 106.911007 112.1833) (xy 107.063734 112.142377) - (xy 107.200666 112.06332) (xy 107.31247 111.951516) (xy 107.391527 111.814584) (xy 107.43245 111.661857) - (xy 107.43245 111.503743) (xy 107.420741 111.460043) (xy 110.17675 111.460043) (xy 110.17675 111.618157) - (xy 110.217673 111.770884) (xy 110.29673 111.907816) (xy 110.408534 112.01962) (xy 110.545466 112.098677) - (xy 110.698193 112.1396) (xy 110.698195 112.1396) (xy 110.856305 112.1396) (xy 110.856307 112.1396) - (xy 111.009034 112.098677) (xy 111.145966 112.01962) (xy 111.25777 111.907816) (xy 111.336827 111.770884) - (xy 111.373038 111.635743) (xy 126.01455 111.635743) (xy 126.01455 111.793857) (xy 126.055473 111.946584) - (xy 126.13453 112.083516) (xy 126.246334 112.19532) (xy 126.383266 112.274377) (xy 126.535993 112.3153) - (xy 126.535995 112.3153) (xy 126.694105 112.3153) (xy 126.694107 112.3153) (xy 126.846834 112.274377) - (xy 126.983766 112.19532) (xy 127.09557 112.083516) (xy 127.174627 111.946584) (xy 127.21555 111.793857) - (xy 127.21555 111.635743) (xy 127.174627 111.483016) (xy 127.09557 111.346084) (xy 126.988629 111.239143) - (xy 131.54115 111.239143) (xy 131.54115 111.397257) (xy 131.582073 111.549984) (xy 131.66113 111.686916) - (xy 131.772934 111.79872) (xy 131.909866 111.877777) (xy 132.062593 111.9187) (xy 132.062595 111.9187) - (xy 132.220705 111.9187) (xy 132.220707 111.9187) (xy 132.373434 111.877777) (xy 132.510366 111.79872) - (xy 132.62217 111.686916) (xy 132.701227 111.549984) (xy 132.74215 111.397257) (xy 132.74215 111.239143) - (xy 132.701227 111.086416) (xy 132.62217 110.949484) (xy 132.510366 110.83768) (xy 132.373434 110.758623) - (xy 132.220707 110.7177) (xy 132.062593 110.7177) (xy 131.909866 110.758623) (xy 131.772934 110.83768) - (xy 131.66113 110.949484) (xy 131.582073 111.086416) (xy 131.54115 111.239143) (xy 126.988629 111.239143) - (xy 126.983766 111.23428) (xy 126.846834 111.155223) (xy 126.694107 111.1143) (xy 126.535993 111.1143) - (xy 126.383266 111.155223) (xy 126.246334 111.23428) (xy 126.13453 111.346084) (xy 126.055473 111.483016) - (xy 126.01455 111.635743) (xy 111.373038 111.635743) (xy 111.37775 111.618157) (xy 111.37775 111.460043) - (xy 111.336827 111.307316) (xy 111.25777 111.170384) (xy 111.145966 111.05858) (xy 111.009034 110.979523) - (xy 110.856307 110.9386) (xy 110.698193 110.9386) (xy 110.545466 110.979523) (xy 110.408534 111.05858) - (xy 110.29673 111.170384) (xy 110.217673 111.307316) (xy 110.17675 111.460043) (xy 107.420741 111.460043) - (xy 107.391527 111.351016) (xy 107.31247 111.214084) (xy 107.200666 111.10228) (xy 107.063734 111.023223) - (xy 106.911007 110.9823) (xy 106.752893 110.9823) (xy 106.600166 111.023223) (xy 106.463234 111.10228) - (xy 106.35143 111.214084) (xy 106.272373 111.351016) (xy 106.23145 111.503743) (xy 80.833368 111.503743) - (xy 80.832318 110.465243) (xy 196.29045 110.465243) (xy 196.29045 110.623357) (xy 196.331373 110.776084) - (xy 196.41043 110.913016) (xy 196.522234 111.02482) (xy 196.659166 111.103877) (xy 196.811893 111.1448) - (xy 196.811895 111.1448) (xy 196.970005 111.1448) (xy 196.970007 111.1448) (xy 197.122734 111.103877) - (xy 197.259666 111.02482) (xy 197.37147 110.913016) (xy 197.450527 110.776084) (xy 197.49145 110.623357) - (xy 197.49145 110.465243) (xy 197.450527 110.312516) (xy 197.37147 110.175584) (xy 197.259666 110.06378) - (xy 197.122734 109.984723) (xy 196.970007 109.9438) (xy 196.811893 109.9438) (xy 196.659166 109.984723) - (xy 196.522234 110.06378) (xy 196.41043 110.175584) (xy 196.331373 110.312516) (xy 196.29045 110.465243) - (xy 80.832318 110.465243) (xy 80.830839 109.001343) (xy 91.49615 109.001343) (xy 91.49615 109.159457) - (xy 91.537073 109.312184) (xy 91.61613 109.449116) (xy 91.727934 109.56092) (xy 91.864866 109.639977) - (xy 92.017593 109.6809) (xy 92.017595 109.6809) (xy 92.175705 109.6809) (xy 92.175707 109.6809) - (xy 92.328434 109.639977) (xy 92.465366 109.56092) (xy 92.57717 109.449116) (xy 92.577171 109.449113) - (xy 92.581758 109.444527) (xy 92.582961 109.44573) (xy 92.626621 109.415716) (xy 92.687786 109.417311) - (xy 92.736332 109.454552) (xy 92.75375 109.510636) (xy 92.75375 109.663957) (xy 92.794673 109.816684) - (xy 92.87373 109.953616) (xy 92.985534 110.06542) (xy 93.122466 110.144477) (xy 93.275193 110.1854) - (xy 93.275195 110.1854) (xy 93.433305 110.1854) (xy 93.433307 110.1854) (xy 93.586034 110.144477) - (xy 93.722966 110.06542) (xy 93.83477 109.953616) (xy 93.913827 109.816684) (xy 93.95475 109.663957) - (xy 93.95475 109.505843) (xy 93.92624 109.399443) (xy 116.23115 109.399443) (xy 116.23115 109.557557) - (xy 116.272073 109.710284) (xy 116.35113 109.847216) (xy 116.462934 109.95902) (xy 116.599866 110.038077) - (xy 116.752593 110.079) (xy 116.752595 110.079) (xy 116.910705 110.079) (xy 116.910707 110.079) - (xy 117.063434 110.038077) (xy 117.200366 109.95902) (xy 117.31217 109.847216) (xy 117.391227 109.710284) - (xy 117.43215 109.557557) (xy 117.43215 109.419243) (xy 180.87385 109.419243) (xy 180.87385 109.577357) - (xy 180.914773 109.730084) (xy 180.99383 109.867016) (xy 181.105634 109.97882) (xy 181.242566 110.057877) - (xy 181.395293 110.0988) (xy 181.395295 110.0988) (xy 181.553405 110.0988) (xy 181.553407 110.0988) - (xy 181.706134 110.057877) (xy 181.843066 109.97882) (xy 181.95487 109.867016) (xy 182.033927 109.730084) - (xy 182.07485 109.577357) (xy 182.07485 109.419243) (xy 182.033927 109.266516) (xy 181.95487 109.129584) - (xy 181.843066 109.01778) (xy 181.706134 108.938723) (xy 181.553407 108.8978) (xy 181.395293 108.8978) - (xy 181.242566 108.938723) (xy 181.105634 109.01778) (xy 180.99383 109.129584) (xy 180.914773 109.266516) - (xy 180.87385 109.419243) (xy 117.43215 109.419243) (xy 117.43215 109.399443) (xy 117.391227 109.246716) - (xy 117.31217 109.109784) (xy 117.200366 108.99798) (xy 117.063434 108.918923) (xy 116.910707 108.878) - (xy 116.752593 108.878) (xy 116.599866 108.918923) (xy 116.462934 108.99798) (xy 116.35113 109.109784) - (xy 116.272073 109.246716) (xy 116.23115 109.399443) (xy 93.92624 109.399443) (xy 93.913827 109.353116) - (xy 93.83477 109.216184) (xy 93.722966 109.10438) (xy 93.586034 109.025323) (xy 93.433307 108.9844) - (xy 93.275193 108.9844) (xy 93.122466 109.025323) (xy 92.985534 109.10438) (xy 92.87373 109.216184) - (xy 92.873728 109.216186) (xy 92.869142 109.220773) (xy 92.86794 109.219571) (xy 92.824267 109.249586) - (xy 92.763103 109.247984) (xy 92.714561 109.210737) (xy 92.69715 109.154663) (xy 92.69715 109.001344) - (xy 92.69261 108.9844) (xy 92.656227 108.848616) (xy 92.57717 108.711684) (xy 92.535629 108.670143) - (xy 163.79875 108.670143) (xy 163.79875 108.828257) (xy 163.839673 108.980984) (xy 163.91873 109.117916) - (xy 164.030534 109.22972) (xy 164.167466 109.308777) (xy 164.320193 109.3497) (xy 164.320195 109.3497) - (xy 164.478305 109.3497) (xy 164.478307 109.3497) (xy 164.631034 109.308777) (xy 164.767966 109.22972) - (xy 164.87977 109.117916) (xy 164.958827 108.980984) (xy 164.99975 108.828257) (xy 164.99975 108.670143) - (xy 164.958827 108.517416) (xy 164.87977 108.380484) (xy 164.767966 108.26868) (xy 164.631034 108.189623) - (xy 164.478307 108.1487) (xy 164.320193 108.1487) (xy 164.167466 108.189623) (xy 164.030534 108.26868) - (xy 163.91873 108.380484) (xy 163.839673 108.517416) (xy 163.79875 108.670143) (xy 92.535629 108.670143) - (xy 92.465366 108.59988) (xy 92.328434 108.520823) (xy 92.175707 108.4799) (xy 92.017593 108.4799) - (xy 91.864866 108.520823) (xy 91.727934 108.59988) (xy 91.61613 108.711684) (xy 91.537073 108.848616) - (xy 91.49615 109.001343) (xy 80.830839 109.001343) (xy 80.829732 107.906619) (xy 80.829166 107.347043) - (xy 99.18935 107.347043) (xy 99.18935 107.505157) (xy 99.230273 107.657884) (xy 99.30933 107.794816) - (xy 99.421134 107.90662) (xy 99.558066 107.985677) (xy 99.710793 108.0266) (xy 99.710795 108.0266) - (xy 99.868905 108.0266) (xy 99.868907 108.0266) (xy 100.021634 107.985677) (xy 100.076599 107.953943) - (xy 173.34645 107.953943) (xy 173.34645 108.112057) (xy 173.387373 108.264784) (xy 173.46643 108.401716) - (xy 173.578234 108.51352) (xy 173.715166 108.592577) (xy 173.867893 108.6335) (xy 173.867895 108.6335) - (xy 174.026005 108.6335) (xy 174.026007 108.6335) (xy 174.178734 108.592577) (xy 174.315666 108.51352) - (xy 174.42747 108.401716) (xy 174.506527 108.264784) (xy 174.54745 108.112057) (xy 174.54745 107.953943) - (xy 174.506527 107.801216) (xy 174.42747 107.664284) (xy 174.315666 107.55248) (xy 174.178734 107.473423) - (xy 174.026007 107.4325) (xy 173.867893 107.4325) (xy 173.715166 107.473423) (xy 173.578234 107.55248) - (xy 173.46643 107.664284) (xy 173.387373 107.801216) (xy 173.34645 107.953943) (xy 100.076599 107.953943) - (xy 100.158566 107.90662) (xy 100.27037 107.794816) (xy 100.349427 107.657884) (xy 100.39035 107.505157) - (xy 100.39035 107.347043) (xy 176.76865 107.347043) (xy 176.76865 107.505157) (xy 176.809573 107.657884) - (xy 176.88863 107.794816) (xy 177.000434 107.90662) (xy 177.137366 107.985677) (xy 177.290093 108.0266) - (xy 177.290095 108.0266) (xy 177.448205 108.0266) (xy 177.448207 108.0266) (xy 177.600934 107.985677) - (xy 177.737866 107.90662) (xy 177.84967 107.794816) (xy 177.928727 107.657884) (xy 177.933936 107.638443) - (xy 186.54115 107.638443) (xy 186.54115 107.796557) (xy 186.582073 107.949284) (xy 186.66113 108.086216) - (xy 186.772934 108.19802) (xy 186.909866 108.277077) (xy 187.062593 108.318) (xy 187.062595 108.318) - (xy 187.220705 108.318) (xy 187.220707 108.318) (xy 187.373434 108.277077) (xy 187.510366 108.19802) - (xy 187.62217 108.086216) (xy 187.701227 107.949284) (xy 187.74215 107.796557) (xy 187.74215 107.638443) - (xy 187.714953 107.536943) (xy 188.09115 107.536943) (xy 188.09115 107.695057) (xy 188.132073 107.847784) - (xy 188.21113 107.984716) (xy 188.322934 108.09652) (xy 188.459866 108.175577) (xy 188.612593 108.2165) - (xy 188.612595 108.2165) (xy 188.770705 108.2165) (xy 188.770707 108.2165) (xy 188.923434 108.175577) - (xy 189.060366 108.09652) (xy 189.17217 107.984716) (xy 189.251227 107.847784) (xy 189.29215 107.695057) - (xy 189.29215 107.536943) (xy 189.251227 107.384216) (xy 189.17217 107.247284) (xy 189.060366 107.13548) - (xy 188.923434 107.056423) (xy 188.770707 107.0155) (xy 188.612593 107.0155) (xy 188.459866 107.056423) - (xy 188.322934 107.13548) (xy 188.21113 107.247284) (xy 188.132073 107.384216) (xy 188.09115 107.536943) - (xy 187.714953 107.536943) (xy 187.701227 107.485716) (xy 187.62217 107.348784) (xy 187.510366 107.23698) - (xy 187.373434 107.157923) (xy 187.220707 107.117) (xy 187.062593 107.117) (xy 186.909866 107.157923) - (xy 186.772934 107.23698) (xy 186.66113 107.348784) (xy 186.582073 107.485716) (xy 186.54115 107.638443) - (xy 177.933936 107.638443) (xy 177.96965 107.505157) (xy 177.96965 107.347043) (xy 177.928727 107.194316) - (xy 177.84967 107.057384) (xy 177.737866 106.94558) (xy 177.600934 106.866523) (xy 177.448207 106.8256) - (xy 177.290093 106.8256) (xy 177.137366 106.866523) (xy 177.000434 106.94558) (xy 176.88863 107.057384) - (xy 176.809573 107.194316) (xy 176.76865 107.347043) (xy 100.39035 107.347043) (xy 100.349427 107.194316) - (xy 100.27037 107.057384) (xy 100.158566 106.94558) (xy 100.021634 106.866523) (xy 99.868907 106.8256) - (xy 99.710793 106.8256) (xy 99.558066 106.866523) (xy 99.421134 106.94558) (xy 99.30933 107.057384) - (xy 99.230273 107.194316) (xy 99.18935 107.347043) (xy 80.829166 107.347043) (xy 80.82916 107.340654) - (xy 80.828065 106.257643) (xy 104.88045 106.257643) (xy 104.88045 106.415757) (xy 104.921373 106.568484) - (xy 105.00043 106.705416) (xy 105.112234 106.81722) (xy 105.249166 106.896277) (xy 105.401893 106.9372) - (xy 105.401895 106.9372) (xy 105.560005 106.9372) (xy 105.560007 106.9372) (xy 105.712734 106.896277) - (xy 105.849666 106.81722) (xy 105.96147 106.705416) (xy 106.040527 106.568484) (xy 106.08145 106.415757) - (xy 106.08145 106.257643) (xy 106.040527 106.104916) (xy 105.96147 105.967984) (xy 105.958929 105.965443) - (xy 112.59115 105.965443) (xy 112.59115 106.123557) (xy 112.632073 106.276284) (xy 112.71113 106.413216) - (xy 112.822934 106.52502) (xy 112.959866 106.604077) (xy 113.112593 106.645) (xy 113.112595 106.645) - (xy 113.270705 106.645) (xy 113.270707 106.645) (xy 113.423434 106.604077) (xy 113.560366 106.52502) - (xy 113.67217 106.413216) (xy 113.751227 106.276284) (xy 113.79215 106.123557) (xy 113.79215 105.965443) - (xy 113.751227 105.812716) (xy 113.67217 105.675784) (xy 113.560366 105.56398) (xy 113.423434 105.484923) - (xy 113.270707 105.444) (xy 113.112593 105.444) (xy 112.959866 105.484923) (xy 112.822934 105.56398) - (xy 112.71113 105.675784) (xy 112.632073 105.812716) (xy 112.59115 105.965443) (xy 105.958929 105.965443) - (xy 105.849666 105.85618) (xy 105.712734 105.777123) (xy 105.560007 105.7362) (xy 105.401893 105.7362) - (xy 105.249166 105.777123) (xy 105.112234 105.85618) (xy 105.00043 105.967984) (xy 104.921373 106.104916) - (xy 104.88045 106.257643) (xy 80.828065 106.257643) (xy 80.828059 106.251254) (xy 80.827114 105.316743) - (xy 115.14295 105.316743) (xy 115.14295 105.474857) (xy 115.183873 105.627584) (xy 115.26293 105.764516) - (xy 115.374734 105.87632) (xy 115.511666 105.955377) (xy 115.664393 105.9963) (xy 115.664395 105.9963) - (xy 115.822505 105.9963) (xy 115.822507 105.9963) (xy 115.975234 105.955377) (xy 116.112166 105.87632) - (xy 116.22397 105.764516) (xy 116.303027 105.627584) (xy 116.317626 105.573099) (xy 208.739418 105.573099) - (xy 208.739419 105.5731) (xy 209.787504 105.5731) (xy 209.74902 105.639757) (xy 209.71665 105.760565) - (xy 209.71665 105.885635) (xy 209.74902 106.006443) (xy 209.787504 106.0731) (xy 208.739419 106.0731) - (xy 208.749891 106.139222) (xy 208.815554 106.341315) (xy 208.912025 106.530652) (xy 209.036927 106.702564) - (xy 209.187185 106.852822) (xy 209.359098 106.977724) (xy 209.391008 106.993983) (xy 209.434273 107.037248) - (xy 209.443844 107.09768) (xy 209.416067 107.152197) (xy 209.36155 107.179974) (xy 209.357869 107.180487) - (xy 209.335083 107.183223) (xy 209.19431 107.238737) (xy 209.194306 107.23874) (xy 209.073731 107.330175) - (xy 209.073725 107.330181) (xy 208.98229 107.450756) (xy 208.982287 107.45076) (xy 208.926773 107.591534) - (xy 208.91615 107.679993) (xy 208.91615 108.966206) (xy 208.926773 109.054665) (xy 208.982287 109.195439) - (xy 208.982288 109.195441) (xy 208.982289 109.195442) (xy 209.073728 109.316022) (xy 209.194308 109.407461) - (xy 209.194309 109.407461) (xy 209.19431 109.407462) (xy 209.222496 109.418577) (xy 209.335086 109.462977) - (xy 209.423548 109.4736) (xy 209.42355 109.4736) (xy 210.95975 109.4736) (xy 210.959752 109.4736) - (xy 211.048214 109.462977) (xy 211.188992 109.407461) (xy 211.309572 109.316022) (xy 211.401011 109.195442) - (xy 211.456527 109.054664) (xy 211.46715 108.966202) (xy 211.46715 107.679998) (xy 211.456527 107.591536) - (xy 211.401011 107.450758) (xy 211.309572 107.330178) (xy 211.188992 107.238739) (xy 211.188991 107.238738) - (xy 211.188989 107.238737) (xy 211.048216 107.183223) (xy 211.025431 107.180487) (xy 210.96991 107.154775) - (xy 210.940105 107.10134) (xy 210.947401 107.040591) (xy 210.989011 106.995733) (xy 210.992292 106.993983) - (xy 211.024199 106.977725) (xy 211.0242 106.977725) (xy 211.196114 106.852822) (xy 211.346372 106.702564) - (xy 211.471274 106.530652) (xy 211.567745 106.341315) (xy 211.633408 106.139222) (xy 211.643881 106.0731) - (xy 210.595796 106.0731) (xy 210.63428 106.006443) (xy 210.66665 105.885635) (xy 210.66665 105.760565) - (xy 210.63428 105.639757) (xy 210.595796 105.5731) (xy 211.643881 105.5731) (xy 211.643881 105.573099) - (xy 211.633408 105.506977) (xy 211.567745 105.304884) (xy 211.471274 105.115547) (xy 211.346372 104.943635) - (xy 211.196114 104.793377) (xy 211.024202 104.668475) (xy 210.834859 104.572001) (xy 210.796476 104.55953) - (xy 210.746976 104.523566) (xy 210.728069 104.465376) (xy 210.746977 104.407185) (xy 210.782122 104.377166) - (xy 210.919644 104.307096) (xy 211.066151 104.200653) (xy 211.194203 104.072601) (xy 211.300646 103.926094) - (xy 211.382861 103.764739) (xy 211.438821 103.592509) (xy 211.456321 103.482016) (xy 211.46715 103.413649) - (xy 211.46715 103.23255) (xy 211.448264 103.113312) (xy 211.438821 103.053691) (xy 211.382861 102.881461) - (xy 211.300646 102.720106) (xy 211.194203 102.573599) (xy 211.066151 102.445547) (xy 210.919644 102.339104) - (xy 210.919643 102.339103) (xy 210.919641 102.339102) (xy 210.758287 102.256888) (xy 210.586056 102.200928) - (xy 210.407199 102.1726) (xy 210.407196 102.1726) (xy 209.976104 102.1726) (xy 209.976101 102.1726) - (xy 209.797243 102.200928) (xy 209.625012 102.256888) (xy 209.463658 102.339102) (xy 209.390402 102.392325) - (xy 209.317149 102.445547) (xy 209.189097 102.573599) (xy 209.1461 102.63278) (xy 209.082652 102.720108) - (xy 209.000438 102.881462) (xy 208.944478 103.053693) (xy 208.91615 103.23255) (xy 208.91615 103.413649) - (xy 208.944478 103.592506) (xy 209.000438 103.764737) (xy 209.071576 103.904354) (xy 209.082654 103.926094) - (xy 209.189097 104.072601) (xy 209.317149 104.200653) (xy 209.463656 104.307096) (xy 209.463658 104.307097) - (xy 209.601175 104.377166) (xy 209.64444 104.420431) (xy 209.654011 104.480863) (xy 209.626233 104.53538) - (xy 209.586824 104.55953) (xy 209.548438 104.572002) (xy 209.359097 104.668475) (xy 209.187185 104.793377) - (xy 209.036927 104.943635) (xy 208.912025 105.115547) (xy 208.815554 105.304884) (xy 208.749891 105.506977) - (xy 208.739418 105.573099) (xy 116.317626 105.573099) (xy 116.34395 105.474857) (xy 116.34395 105.316743) - (xy 116.303027 105.164016) (xy 116.22397 105.027084) (xy 116.112166 104.91528) (xy 115.975234 104.836223) - (xy 115.822507 104.7953) (xy 115.664393 104.7953) (xy 115.511666 104.836223) (xy 115.374734 104.91528) - (xy 115.26293 105.027084) (xy 115.183873 105.164016) (xy 115.14295 105.316743) (xy 80.827114 105.316743) - (xy 80.827108 105.310354) (xy 80.825763 103.980443) (xy 90.49625 103.980443) (xy 90.49625 104.138557) - (xy 90.537173 104.291284) (xy 90.61623 104.428216) (xy 90.728034 104.54002) (xy 90.864966 104.619077) - (xy 91.017693 104.66) (xy 91.017695 104.66) (xy 91.175805 104.66) (xy 91.175807 104.66) (xy 91.328534 104.619077) - (xy 91.465466 104.54002) (xy 91.57727 104.428216) (xy 91.656327 104.291284) (xy 91.69725 104.138557) - (xy 91.69725 103.980443) (xy 91.656327 103.827716) (xy 91.57727 103.690784) (xy 91.465466 103.57898) - (xy 91.328534 103.499923) (xy 91.175807 103.459) (xy 91.017693 103.459) (xy 90.864966 103.499923) - (xy 90.728034 103.57898) (xy 90.61623 103.690784) (xy 90.537173 103.827716) (xy 90.49625 103.980443) - (xy 80.825763 103.980443) (xy 80.825757 103.974054) (xy 80.82289 101.138343) (xy 97.77335 101.138343) - (xy 97.77335 101.296457) (xy 97.814273 101.449184) (xy 97.89333 101.586116) (xy 98.005134 101.69792) - (xy 98.142066 101.776977) (xy 98.294793 101.8179) (xy 98.294795 101.8179) (xy 98.452904 101.8179) - (xy 98.452907 101.8179) (xy 98.545595 101.793064) (xy 98.606693 101.796266) (xy 98.654243 101.834771) - (xy 98.670079 101.893872) (xy 98.648976 101.948847) (xy 98.649481 101.949234) (xy 98.648174 101.950936) - (xy 98.648153 101.950993) (xy 98.648004 101.951157) (xy 98.645535 101.954376) (xy 98.64553 101.954383) - (xy 98.64553 101.954384) (xy 98.566473 102.091316) (xy 98.52555 102.244043) (xy 98.52555 102.402157) - (xy 98.566473 102.554884) (xy 98.64553 102.691816) (xy 98.757334 102.80362) (xy 98.894266 102.882677) - (xy 98.963639 102.901265) (xy 99.014952 102.934588) (xy 99.036879 102.991709) (xy 99.021044 103.05081) - (xy 99.00802 103.066893) (xy 98.992932 103.081981) (xy 98.99293 103.081983) (xy 98.99293 103.081984) - (xy 98.913873 103.218916) (xy 98.87295 103.371643) (xy 98.87295 103.529757) (xy 98.913873 103.682484) - (xy 98.99293 103.819416) (xy 99.104734 103.93122) (xy 99.241666 104.010277) (xy 99.394393 104.0512) - (xy 99.394395 104.0512) (xy 99.552505 104.0512) (xy 99.552507 104.0512) (xy 99.705234 104.010277) - (xy 99.842166 103.93122) (xy 99.95397 103.819416) (xy 100.033027 103.682484) (xy 100.07395 103.529757) - (xy 100.07395 103.371643) (xy 100.033027 103.218916) (xy 99.95397 103.081984) (xy 99.906229 103.034243) - (xy 113.30135 103.034243) (xy 113.30135 103.192357) (xy 113.342273 103.345084) (xy 113.42133 103.482016) - (xy 113.533134 103.59382) (xy 113.670066 103.672877) (xy 113.822793 103.7138) (xy 113.822795 103.7138) - (xy 113.980905 103.7138) (xy 113.980907 103.7138) (xy 114.133634 103.672877) (xy 114.270566 103.59382) - (xy 114.357443 103.506943) (xy 132.82905 103.506943) (xy 132.82905 103.665057) (xy 132.869973 103.817784) - (xy 132.94903 103.954716) (xy 133.060834 104.06652) (xy 133.197766 104.145577) (xy 133.350493 104.1865) - (xy 133.350495 104.1865) (xy 133.508605 104.1865) (xy 133.508607 104.1865) (xy 133.661334 104.145577) - (xy 133.798266 104.06652) (xy 133.904443 103.960343) (xy 175.46625 103.960343) (xy 175.46625 104.118457) - (xy 175.507173 104.271184) (xy 175.58623 104.408116) (xy 175.698034 104.51992) (xy 175.834966 104.598977) - (xy 175.987693 104.6399) (xy 175.987695 104.6399) (xy 176.145805 104.6399) (xy 176.145807 104.6399) - (xy 176.298534 104.598977) (xy 176.435466 104.51992) (xy 176.54727 104.408116) (xy 176.626327 104.271184) - (xy 176.66725 104.118457) (xy 176.66725 103.960343) (xy 176.626327 103.807616) (xy 176.54727 103.670684) - (xy 176.435466 103.55888) (xy 176.298534 103.479823) (xy 176.145807 103.4389) (xy 175.987693 103.4389) - (xy 175.834966 103.479823) (xy 175.698034 103.55888) (xy 175.58623 103.670684) (xy 175.507173 103.807616) - (xy 175.46625 103.960343) (xy 133.904443 103.960343) (xy 133.91007 103.954716) (xy 133.989127 103.817784) - (xy 134.03005 103.665057) (xy 134.03005 103.506943) (xy 133.989127 103.354216) (xy 133.91007 103.217284) - (xy 133.798266 103.10548) (xy 133.661334 103.026423) (xy 133.508607 102.9855) (xy 133.350493 102.9855) - (xy 133.197766 103.026423) (xy 133.060834 103.10548) (xy 132.94903 103.217284) (xy 132.869973 103.354216) - (xy 132.82905 103.506943) (xy 114.357443 103.506943) (xy 114.38237 103.482016) (xy 114.461427 103.345084) - (xy 114.50235 103.192357) (xy 114.50235 103.034243) (xy 114.461427 102.881516) (xy 114.38237 102.744584) - (xy 114.270566 102.63278) (xy 114.133634 102.553723) (xy 113.980907 102.5128) (xy 113.822793 102.5128) - (xy 113.670066 102.553723) (xy 113.533134 102.63278) (xy 113.42133 102.744584) (xy 113.342273 102.881516) - (xy 113.30135 103.034243) (xy 99.906229 103.034243) (xy 99.842166 102.97018) (xy 99.705234 102.891123) - (xy 99.635859 102.872534) (xy 99.584547 102.839211) (xy 99.56262 102.782089) (xy 99.578456 102.722989) - (xy 99.591477 102.706908) (xy 99.60657 102.691816) (xy 99.685627 102.554884) (xy 99.72655 102.402157) - (xy 99.72655 102.244043) (xy 188.06925 102.244043) (xy 188.06925 102.402157) (xy 188.110173 102.554884) - (xy 188.18923 102.691816) (xy 188.301034 102.80362) (xy 188.437966 102.882677) (xy 188.590693 102.9236) - (xy 188.590695 102.9236) (xy 188.748805 102.9236) (xy 188.748807 102.9236) (xy 188.901534 102.882677) - (xy 189.038466 102.80362) (xy 189.15027 102.691816) (xy 189.229327 102.554884) (xy 189.27025 102.402157) - (xy 189.27025 102.244043) (xy 189.229327 102.091316) (xy 189.15027 101.954384) (xy 189.038466 101.84258) - (xy 188.901534 101.763523) (xy 188.748807 101.7226) (xy 188.590693 101.7226) (xy 188.437966 101.763523) - (xy 188.301034 101.84258) (xy 188.18923 101.954384) (xy 188.110173 102.091316) (xy 188.06925 102.244043) - (xy 99.72655 102.244043) (xy 99.685627 102.091316) (xy 99.60657 101.954384) (xy 99.494766 101.84258) - (xy 99.357834 101.763523) (xy 99.205107 101.7226) (xy 99.046993 101.7226) (xy 98.954307 101.747435) - (xy 98.893205 101.744232) (xy 98.845655 101.705727) (xy 98.82982 101.646626) (xy 98.850922 101.591652) - (xy 98.850419 101.591266) (xy 98.851723 101.589565) (xy 98.851747 101.589505) (xy 98.851902 101.589332) - (xy 98.854364 101.586123) (xy 98.854365 101.58612) (xy 98.85437 101.586116) (xy 98.933427 101.449184) - (xy 98.97435 101.296457) (xy 98.97435 101.138343) (xy 98.933427 100.985616) (xy 98.85437 100.848684) - (xy 98.742566 100.73688) (xy 98.605634 100.657823) (xy 98.452907 100.6169) (xy 98.294793 100.6169) - (xy 98.142066 100.657823) (xy 98.005134 100.73688) (xy 97.89333 100.848684) (xy 97.814273 100.985616) - (xy 97.77335 101.138343) (xy 80.82289 101.138343) (xy 80.822884 101.131954) (xy 80.821878 100.136643) - (xy 101.98945 100.136643) (xy 101.98945 100.294757) (xy 102.030373 100.447484) (xy 102.10943 100.584416) - (xy 102.221234 100.69622) (xy 102.358166 100.775277) (xy 102.510893 100.8162) (xy 102.510895 100.8162) - (xy 102.669005 100.8162) (xy 102.669007 100.8162) (xy 102.821734 100.775277) (xy 102.958666 100.69622) - (xy 103.07047 100.584416) (xy 103.149527 100.447484) (xy 103.19045 100.294757) (xy 103.19045 100.136643) - (xy 103.149527 99.983916) (xy 103.07047 99.846984) (xy 102.958666 99.73518) (xy 102.821734 99.656123) - (xy 102.669007 99.6152) (xy 102.510893 99.6152) (xy 102.358166 99.656123) (xy 102.221234 99.73518) - (xy 102.10943 99.846984) (xy 102.030373 99.983916) (xy 101.98945 100.136643) (xy 80.821878 100.136643) - (xy 80.821872 100.130254) (xy 80.818866 97.157243) (xy 105.90325 97.157243) (xy 105.90325 97.315357) - (xy 105.944173 97.468084) (xy 106.02323 97.605016) (xy 106.135034 97.71682) (xy 106.271966 97.795877) - (xy 106.424693 97.8368) (xy 106.424695 97.8368) (xy 106.582805 97.8368) (xy 106.582807 97.8368) - (xy 106.735534 97.795877) (xy 106.872466 97.71682) (xy 106.916643 97.672643) (xy 121.40245 97.672643) - (xy 121.40245 97.830757) (xy 121.443373 97.983484) (xy 121.52243 98.120416) (xy 121.634234 98.23222) - (xy 121.771166 98.311277) (xy 121.923893 98.3522) (xy 121.923895 98.3522) (xy 122.082005 98.3522) - (xy 122.082007 98.3522) (xy 122.234734 98.311277) (xy 122.371666 98.23222) (xy 122.48347 98.120416) - (xy 122.552794 98.000343) (xy 126.06405 98.000343) (xy 126.06405 98.158457) (xy 126.104973 98.311184) - (xy 126.18403 98.448116) (xy 126.295834 98.55992) (xy 126.432766 98.638977) (xy 126.585493 98.6799) - (xy 126.585495 98.6799) (xy 126.743605 98.6799) (xy 126.743607 98.6799) (xy 126.896334 98.638977) - (xy 127.033266 98.55992) (xy 127.14507 98.448116) (xy 127.224127 98.311184) (xy 127.26505 98.158457) - (xy 127.26505 98.000343) (xy 127.224127 97.847616) (xy 127.14507 97.710684) (xy 127.033266 97.59888) - (xy 127.033263 97.598878) (xy 127.033259 97.598874) (xy 127.02812 97.594931) (xy 127.029354 97.593321) - (xy 126.994601 97.554731) (xy 126.9882 97.493881) (xy 127.018788 97.44089) (xy 127.074681 97.415999) - (xy 127.110659 97.418828) (xy 127.242293 97.4541) (xy 127.242295 97.4541) (xy 127.400405 97.4541) - (xy 127.400407 97.4541) (xy 127.553134 97.413177) (xy 127.690066 97.33412) (xy 127.80187 97.222316) - (xy 127.860166 97.121343) (xy 133.63915 97.121343) (xy 133.63915 97.279457) (xy 133.680073 97.432184) - (xy 133.75913 97.569116) (xy 133.870934 97.68092) (xy 134.007866 97.759977) (xy 134.160593 97.8009) - (xy 134.160595 97.8009) (xy 134.318705 97.8009) (xy 134.318707 97.8009) (xy 134.471434 97.759977) - (xy 134.50855 97.738547) (xy 134.568393 97.725827) (xy 134.62429 97.750712) (xy 134.654883 97.8037) - (xy 134.653674 97.849907) (xy 134.63105 97.934343) (xy 134.63105 98.092459) (xy 134.631698 98.094876) - (xy 134.631604 98.096665) (xy 134.631897 98.098889) (xy 134.631484 98.098943) (xy 134.628497 98.155978) - (xy 134.589992 98.203528) (xy 134.536072 98.2195) (xy 134.412693 98.2195) (xy 134.259966 98.260423) - (xy 134.123034 98.33948) (xy 134.01123 98.451284) (xy 133.932173 98.588216) (xy 133.89125 98.740943) - (xy 133.89125 98.899057) (xy 133.932173 99.051784) (xy 134.01123 99.188716) (xy 134.123034 99.30052) - (xy 134.259966 99.379577) (xy 134.412693 99.4205) (xy 134.412695 99.4205) (xy 134.570805 99.4205) - (xy 134.570807 99.4205) (xy 134.723534 99.379577) (xy 134.860466 99.30052) (xy 134.97227 99.188716) - (xy 135.051327 99.051784) (xy 135.09225 98.899057) (xy 135.09225 98.740943) (xy 135.091602 98.738524) - (xy 135.091695 98.736734) (xy 135.091403 98.734511) (xy 135.091815 98.734456) (xy 135.094803 98.677422) - (xy 135.133308 98.629872) (xy 135.187228 98.6139) (xy 135.310605 98.6139) (xy 135.310607 98.6139) - (xy 135.463334 98.572977) (xy 135.600266 98.49392) (xy 135.603743 98.490443) (xy 141.14225 98.490443) - (xy 141.14225 98.648557) (xy 141.183173 98.801284) (xy 141.26223 98.938216) (xy 141.374034 99.05002) - (xy 141.510966 99.129077) (xy 141.663693 99.17) (xy 141.663695 99.17) (xy 141.821805 99.17) (xy 141.821807 99.17) - (xy 141.974534 99.129077) (xy 142.111466 99.05002) (xy 142.22327 98.938216) (xy 142.302327 98.801284) - (xy 142.34325 98.648557) (xy 142.34325 98.490443) (xy 142.313749 98.380343) (xy 175.08345 98.380343) - (xy 175.08345 98.538457) (xy 175.124373 98.691184) (xy 175.20343 98.828116) (xy 175.315234 98.93992) - (xy 175.452166 99.018977) (xy 175.604893 99.0599) (xy 175.604895 99.0599) (xy 175.763005 99.0599) - (xy 175.763007 99.0599) (xy 175.915734 99.018977) (xy 176.052666 98.93992) (xy 176.16447 98.828116) - (xy 176.243527 98.691184) (xy 176.28445 98.538457) (xy 176.28445 98.380343) (xy 176.243527 98.227616) - (xy 176.16447 98.090684) (xy 176.052666 97.97888) (xy 175.915734 97.899823) (xy 175.763007 97.8589) - (xy 175.604893 97.8589) (xy 175.452166 97.899823) (xy 175.315234 97.97888) (xy 175.20343 98.090684) - (xy 175.124373 98.227616) (xy 175.08345 98.380343) (xy 142.313749 98.380343) (xy 142.302327 98.337716) - (xy 142.22327 98.200784) (xy 142.111466 98.08898) (xy 141.974534 98.009923) (xy 141.821807 97.969) - (xy 141.663693 97.969) (xy 141.510966 98.009923) (xy 141.374034 98.08898) (xy 141.26223 98.200784) - (xy 141.183173 98.337716) (xy 141.14225 98.490443) (xy 135.603743 98.490443) (xy 135.71207 98.382116) - (xy 135.791127 98.245184) (xy 135.83205 98.092457) (xy 135.83205 97.934343) (xy 135.791127 97.781616) - (xy 135.71207 97.644684) (xy 135.600266 97.53288) (xy 135.485099 97.466389) (xy 135.485099 97.466388) - (xy 135.463336 97.453824) (xy 135.463335 97.453823) (xy 135.463334 97.453823) (xy 135.310607 97.4129) - (xy 135.152493 97.4129) (xy 135.080528 97.432183) (xy 134.999764 97.453823) (xy 134.962651 97.475251) - (xy 134.902803 97.487972) (xy 134.846907 97.463085) (xy 134.816315 97.410096) (xy 134.816916 97.387143) - (xy 137.53505 97.387143) (xy 137.53505 97.545257) (xy 137.575973 97.697984) (xy 137.65503 97.834916) - (xy 137.766834 97.94672) (xy 137.903766 98.025777) (xy 138.056493 98.0667) (xy 138.056495 98.0667) - (xy 138.214605 98.0667) (xy 138.214607 98.0667) (xy 138.367334 98.025777) (xy 138.504266 97.94672) - (xy 138.61607 97.834916) (xy 138.695127 97.697984) (xy 138.718208 97.611843) (xy 171.15965 97.611843) - (xy 171.15965 97.769957) (xy 171.200573 97.922684) (xy 171.27963 98.059616) (xy 171.391434 98.17142) - (xy 171.528366 98.250477) (xy 171.681093 98.2914) (xy 171.681095 98.2914) (xy 171.839205 98.2914) - (xy 171.839207 98.2914) (xy 171.991934 98.250477) (xy 172.128866 98.17142) (xy 172.24067 98.059616) - (xy 172.319727 97.922684) (xy 172.36065 97.769957) (xy 172.36065 97.611843) (xy 172.319727 97.459116) - (xy 172.24067 97.322184) (xy 172.128866 97.21038) (xy 171.991934 97.131323) (xy 171.839207 97.0904) - (xy 171.681093 97.0904) (xy 171.528366 97.131323) (xy 171.391434 97.21038) (xy 171.27963 97.322184) - (xy 171.200573 97.459116) (xy 171.15965 97.611843) (xy 138.718208 97.611843) (xy 138.73605 97.545257) - (xy 138.73605 97.387143) (xy 138.695127 97.234416) (xy 138.61607 97.097484) (xy 138.504266 96.98568) - (xy 138.367334 96.906623) (xy 138.214607 96.8657) (xy 138.056493 96.8657) (xy 137.903766 96.906623) - (xy 137.766834 96.98568) (xy 137.65503 97.097484) (xy 137.575973 97.234416) (xy 137.53505 97.387143) - (xy 134.816916 97.387143) (xy 134.817524 97.363895) (xy 134.84015 97.279457) (xy 134.84015 97.121343) - (xy 134.799227 96.968616) (xy 134.72017 96.831684) (xy 134.608366 96.71988) (xy 134.471434 96.640823) - (xy 134.318707 96.5999) (xy 134.160593 96.5999) (xy 134.007866 96.640823) (xy 133.870934 96.71988) - (xy 133.75913 96.831684) (xy 133.680073 96.968616) (xy 133.63915 97.121343) (xy 127.860166 97.121343) - (xy 127.880927 97.085384) (xy 127.92185 96.932657) (xy 127.92185 96.774543) (xy 127.880927 96.621816) - (xy 127.80187 96.484884) (xy 127.797629 96.480643) (xy 143.81045 96.480643) (xy 143.81045 96.638757) - (xy 143.851373 96.791484) (xy 143.93043 96.928416) (xy 144.042234 97.04022) (xy 144.179166 97.119277) - (xy 144.331893 97.1602) (xy 144.331895 97.1602) (xy 144.490005 97.1602) (xy 144.490007 97.1602) - (xy 144.642734 97.119277) (xy 144.779666 97.04022) (xy 144.89147 96.928416) (xy 144.8959 96.920743) - (xy 152.45605 96.920743) (xy 152.45605 97.078857) (xy 152.496973 97.231584) (xy 152.57603 97.368516) - (xy 152.687834 97.48032) (xy 152.824766 97.559377) (xy 152.977493 97.6003) (xy 152.977495 97.6003) - (xy 153.135605 97.6003) (xy 153.135607 97.6003) (xy 153.288334 97.559377) (xy 153.425266 97.48032) - (xy 153.53707 97.368516) (xy 153.616127 97.231584) (xy 153.65705 97.078857) (xy 153.65705 96.920743) - (xy 153.616127 96.768016) (xy 153.53707 96.631084) (xy 153.425266 96.51928) (xy 153.288334 96.440223) - (xy 153.135607 96.3993) (xy 152.977493 96.3993) (xy 152.824766 96.440223) (xy 152.687834 96.51928) - (xy 152.57603 96.631084) (xy 152.496973 96.768016) (xy 152.45605 96.920743) (xy 144.8959 96.920743) - (xy 144.970527 96.791484) (xy 145.01145 96.638757) (xy 145.01145 96.480643) (xy 144.970527 96.327916) - (xy 144.89147 96.190984) (xy 144.779666 96.07918) (xy 144.642734 96.000123) (xy 144.490007 95.9592) - (xy 144.331893 95.9592) (xy 144.179166 96.000123) (xy 144.042234 96.07918) (xy 143.93043 96.190984) - (xy 143.851373 96.327916) (xy 143.81045 96.480643) (xy 127.797629 96.480643) (xy 127.690066 96.37308) - (xy 127.553134 96.294023) (xy 127.400407 96.2531) (xy 127.242293 96.2531) (xy 127.089566 96.294023) - (xy 126.952634 96.37308) (xy 126.84083 96.484884) (xy 126.761773 96.621816) (xy 126.72085 96.774543) - (xy 126.72085 96.932657) (xy 126.761773 97.085384) (xy 126.84083 97.222316) (xy 126.952634 97.33412) - (xy 126.952636 97.334121) (xy 126.95264 97.334125) (xy 126.95778 97.338069) (xy 126.956544 97.339679) - (xy 126.991295 97.37826) (xy 126.997701 97.439109) (xy 126.967118 97.492102) (xy 126.911227 97.516999) - (xy 126.875239 97.51417) (xy 126.777464 97.487972) (xy 126.743607 97.4789) (xy 126.585493 97.4789) - (xy 126.432766 97.519823) (xy 126.295834 97.59888) (xy 126.18403 97.710684) (xy 126.104973 97.847616) - (xy 126.06405 98.000343) (xy 122.552794 98.000343) (xy 122.562527 97.983484) (xy 122.60345 97.830757) - (xy 122.60345 97.672643) (xy 122.562527 97.519916) (xy 122.48347 97.382984) (xy 122.371666 97.27118) - (xy 122.234734 97.192123) (xy 122.082007 97.1512) (xy 121.923893 97.1512) (xy 121.771166 97.192123) - (xy 121.634234 97.27118) (xy 121.52243 97.382984) (xy 121.443373 97.519916) (xy 121.40245 97.672643) - (xy 106.916643 97.672643) (xy 106.98427 97.605016) (xy 107.063327 97.468084) (xy 107.10425 97.315357) - (xy 107.10425 97.157243) (xy 107.063327 97.004516) (xy 106.98427 96.867584) (xy 106.872466 96.75578) - (xy 106.735534 96.676723) (xy 106.582807 96.6358) (xy 106.424693 96.6358) (xy 106.271966 96.676723) - (xy 106.135034 96.75578) (xy 106.02323 96.867584) (xy 105.944173 97.004516) (xy 105.90325 97.157243) - (xy 80.818866 97.157243) (xy 80.81886 97.150854) (xy 80.817998 96.298143) (xy 108.07385 96.298143) - (xy 108.07385 96.456257) (xy 108.114773 96.608984) (xy 108.19383 96.745916) (xy 108.305634 96.85772) - (xy 108.442566 96.936777) (xy 108.595293 96.9777) (xy 108.595295 96.9777) (xy 108.753405 96.9777) - (xy 108.753407 96.9777) (xy 108.906134 96.936777) (xy 109.043066 96.85772) (xy 109.15487 96.745916) - (xy 109.233927 96.608984) (xy 109.271344 96.469343) (xy 122.78205 96.469343) (xy 122.78205 96.627457) - (xy 122.822973 96.780184) (xy 122.90203 96.917116) (xy 123.013834 97.02892) (xy 123.150766 97.107977) - (xy 123.303493 97.1489) (xy 123.303495 97.1489) (xy 123.461605 97.1489) (xy 123.461607 97.1489) - (xy 123.614334 97.107977) (xy 123.751266 97.02892) (xy 123.86307 96.917116) (xy 123.942127 96.780184) - (xy 123.98305 96.627457) (xy 123.98305 96.469343) (xy 123.942127 96.316616) (xy 123.86307 96.179684) - (xy 123.751266 96.06788) (xy 123.614334 95.988823) (xy 123.461607 95.9479) (xy 123.303493 95.9479) - (xy 123.150766 95.988823) (xy 123.013834 96.06788) (xy 122.90203 96.179684) (xy 122.822973 96.316616) - (xy 122.78205 96.469343) (xy 109.271344 96.469343) (xy 109.27485 96.456257) (xy 109.27485 96.298143) - (xy 109.233927 96.145416) (xy 109.15487 96.008484) (xy 109.043066 95.89668) (xy 108.906134 95.817623) - (xy 108.753407 95.7767) (xy 108.595293 95.7767) (xy 108.442566 95.817623) (xy 108.305634 95.89668) - (xy 108.19383 96.008484) (xy 108.114773 96.145416) (xy 108.07385 96.298143) (xy 80.817998 96.298143) - (xy 80.817992 96.291754) (xy 80.817073 95.383143) (xy 102.32065 95.383143) (xy 102.32065 95.541257) - (xy 102.361573 95.693984) (xy 102.44063 95.830916) (xy 102.552434 95.94272) (xy 102.689366 96.021777) - (xy 102.842093 96.0627) (xy 102.842095 96.0627) (xy 103.000205 96.0627) (xy 103.000207 96.0627) - (xy 103.152934 96.021777) (xy 103.289866 95.94272) (xy 103.40167 95.830916) (xy 103.480727 95.693984) - (xy 103.52165 95.541257) (xy 103.52165 95.383143) (xy 103.480727 95.230416) (xy 103.40167 95.093484) - (xy 103.289866 94.98168) (xy 103.152934 94.902623) (xy 103.000207 94.8617) (xy 102.842093 94.8617) - (xy 102.689366 94.902623) (xy 102.552434 94.98168) (xy 102.44063 95.093484) (xy 102.361573 95.230416) - (xy 102.32065 95.383143) (xy 80.817073 95.383143) (xy 80.817067 95.376754) (xy 80.81603 94.351343) - (xy 112.91855 94.351343) (xy 112.91855 94.509457) (xy 112.959473 94.662184) (xy 113.03853 94.799116) - (xy 113.150334 94.91092) (xy 113.287266 94.989977) (xy 113.439993 95.0309) (xy 113.439995 95.0309) - (xy 113.598105 95.0309) (xy 113.598107 95.0309) (xy 113.750834 94.989977) (xy 113.887766 94.91092) - (xy 113.99957 94.799116) (xy 114.078627 94.662184) (xy 114.078628 94.662179) (xy 114.079514 94.660645) - (xy 114.124983 94.619703) (xy 114.185833 94.613307) (xy 114.235252 94.640138) (xy 114.277834 94.68272) - (xy 114.414766 94.761777) (xy 114.567493 94.8027) (xy 114.567495 94.8027) (xy 114.725605 94.8027) - (xy 114.725607 94.8027) (xy 114.878334 94.761777) (xy 115.015266 94.68272) (xy 115.12707 94.570916) - (xy 115.206127 94.433984) (xy 115.226716 94.357143) (xy 116.23055 94.357143) (xy 116.23055 94.515257) - (xy 116.271473 94.667984) (xy 116.35053 94.804916) (xy 116.462334 94.91672) (xy 116.599266 94.995777) - (xy 116.751993 95.0367) (xy 116.751995 95.0367) (xy 116.910105 95.0367) (xy 116.910107 95.0367) - (xy 117.062834 94.995777) (xy 117.199766 94.91672) (xy 117.205211 94.911274) (xy 117.259724 94.883496) - (xy 117.320157 94.893064) (xy 117.363423 94.936327) (xy 117.370842 94.955652) (xy 117.392071 95.03488) - (xy 117.392071 95.034881) (xy 117.392073 95.034884) (xy 117.47113 95.171816) (xy 117.582934 95.28362) - (xy 117.719866 95.362677) (xy 117.872593 95.4036) (xy 117.872595 95.4036) (xy 118.030705 95.4036) - (xy 118.030707 95.4036) (xy 118.183434 95.362677) (xy 118.320366 95.28362) (xy 118.43217 95.171816) - (xy 118.511227 95.034884) (xy 118.55215 94.882157) (xy 118.55215 94.724043) (xy 118.511227 94.571316) - (xy 118.43217 94.434384) (xy 118.320366 94.32258) (xy 118.320363 94.322578) (xy 118.286958 94.303291) - (xy 118.286956 94.303291) (xy 118.183434 94.243523) (xy 118.110734 94.224043) (xy 124.09115 94.224043) - (xy 124.09115 94.382157) (xy 124.132073 94.534884) (xy 124.21113 94.671816) (xy 124.322934 94.78362) - (xy 124.459866 94.862677) (xy 124.477774 94.867475) (xy 124.529086 94.900797) (xy 124.551014 94.957918) - (xy 124.55115 94.963101) (xy 124.55115 95.072157) (xy 124.592073 95.224884) (xy 124.592074 95.224885) - (xy 124.592074 95.224886) (xy 124.608883 95.254) (xy 124.621605 95.313848) (xy 124.596719 95.369744) - (xy 124.572648 95.389236) (xy 124.462935 95.452579) (xy 124.462934 95.45258) (xy 124.35113 95.564384) - (xy 124.272073 95.701316) (xy 124.23115 95.854043) (xy 124.23115 96.012157) (xy 124.272073 96.164884) - (xy 124.35113 96.301816) (xy 124.462934 96.41362) (xy 124.599866 96.492677) (xy 124.752593 96.5336) - (xy 124.752595 96.5336) (xy 124.910705 96.5336) (xy 124.910707 96.5336) (xy 125.063434 96.492677) - (xy 125.200366 96.41362) (xy 125.31217 96.301816) (xy 125.391227 96.164884) (xy 125.43215 96.012157) - (xy 125.43215 95.854043) (xy 125.391227 95.701316) (xy 125.374414 95.672195) (xy 125.361694 95.61235) - (xy 125.386581 95.556454) (xy 125.410647 95.536965) (xy 125.520366 95.47362) (xy 125.63217 95.361816) - (xy 125.711227 95.224884) (xy 125.726109 95.169343) (xy 126.90685 95.169343) (xy 126.90685 95.327457) - (xy 126.947773 95.480184) (xy 127.02683 95.617116) (xy 127.138634 95.72892) (xy 127.275566 95.807977) - (xy 127.428293 95.8489) (xy 127.428295 95.8489) (xy 127.586405 95.8489) (xy 127.586407 95.8489) - (xy 127.739134 95.807977) (xy 127.876066 95.72892) (xy 127.98787 95.617116) (xy 128.066927 95.480184) - (xy 128.084274 95.415443) (xy 136.07525 95.415443) (xy 136.07525 95.573557) (xy 136.116173 95.726284) - (xy 136.19523 95.863216) (xy 136.307034 95.97502) (xy 136.443966 96.054077) (xy 136.596693 96.095) - (xy 136.596695 96.095) (xy 136.754805 96.095) (xy 136.754807 96.095) (xy 136.907534 96.054077) (xy 137.044466 95.97502) - (xy 137.15627 95.863216) (xy 137.235327 95.726284) (xy 137.27625 95.573557) (xy 137.27625 95.415443) - (xy 137.235327 95.262716) (xy 137.15627 95.125784) (xy 137.044466 95.01398) (xy 136.907534 94.934923) - (xy 136.754807 94.894) (xy 136.596693 94.894) (xy 136.443966 94.934923) (xy 136.307034 95.01398) - (xy 136.19523 95.125784) (xy 136.116173 95.262716) (xy 136.07525 95.415443) (xy 128.084274 95.415443) - (xy 128.10785 95.327457) (xy 128.10785 95.169343) (xy 128.066927 95.016616) (xy 127.98787 94.879684) - (xy 127.876066 94.76788) (xy 127.739134 94.688823) (xy 127.586407 94.6479) (xy 127.428293 94.6479) - (xy 127.275566 94.688823) (xy 127.138634 94.76788) (xy 127.02683 94.879684) (xy 126.947773 95.016616) - (xy 126.90685 95.169343) (xy 125.726109 95.169343) (xy 125.75215 95.072157) (xy 125.75215 94.914043) - (xy 125.719633 94.792688) (xy 125.722835 94.731591) (xy 125.76134 94.684041) (xy 125.765718 94.681358) - (xy 125.900366 94.60362) (xy 126.01217 94.491816) (xy 126.091227 94.354884) (xy 126.13215 94.202157) - (xy 126.13215 94.044043) (xy 126.091227 93.891316) (xy 126.01217 93.754384) (xy 125.900366 93.64258) - (xy 125.763434 93.563523) (xy 125.610707 93.5226) (xy 125.452593 93.5226) (xy 125.299866 93.563523) - (xy 125.251263 93.591584) (xy 125.162931 93.642582) (xy 125.06499 93.740523) (xy 125.010474 93.7683) - (xy 124.950042 93.758728) (xy 124.945515 93.756271) (xy 124.923434 93.743523) (xy 124.770707 93.7026) - (xy 124.612593 93.7026) (xy 124.459866 93.743523) (xy 124.322934 93.82258) (xy 124.21113 93.934384) - (xy 124.132073 94.071316) (xy 124.09115 94.224043) (xy 118.110734 94.224043) (xy 118.030707 94.2026) - (xy 117.872593 94.2026) (xy 117.719866 94.243523) (xy 117.58293 94.322582) (xy 117.577483 94.32803) - (xy 117.522965 94.355805) (xy 117.462534 94.34623) (xy 117.419271 94.302964) (xy 117.411857 94.28365) - (xy 117.390627 94.204416) (xy 117.31157 94.067484) (xy 117.199766 93.95568) (xy 117.062834 93.876623) - (xy 116.910107 93.8357) (xy 116.751993 93.8357) (xy 116.599266 93.876623) (xy 116.462334 93.95568) - (xy 116.35053 94.067484) (xy 116.271473 94.204416) (xy 116.23055 94.357143) (xy 115.226716 94.357143) - (xy 115.24705 94.281257) (xy 115.24705 94.123143) (xy 115.206127 93.970416) (xy 115.12707 93.833484) - (xy 115.015266 93.72168) (xy 114.878334 93.642623) (xy 114.725607 93.6017) (xy 114.567493 93.6017) - (xy 114.414766 93.642623) (xy 114.277834 93.72168) (xy 114.16603 93.833484) (xy 114.086973 93.970416) - (xy 114.086972 93.970417) (xy 114.086085 93.971955) (xy 114.040615 94.012896) (xy 113.979765 94.019292) - (xy 113.930346 93.99246) (xy 113.887766 93.94988) (xy 113.750834 93.870823) (xy 113.598107 93.8299) - (xy 113.439993 93.8299) (xy 113.287266 93.870823) (xy 113.150334 93.94988) (xy 113.03853 94.061684) - (xy 112.959473 94.198616) (xy 112.91855 94.351343) (xy 80.81603 94.351343) (xy 80.816024 94.344954) - (xy 80.814926 93.259043) (xy 92.76615 93.259043) (xy 92.76615 93.417157) (xy 92.807073 93.569884) - (xy 92.88613 93.706816) (xy 92.997934 93.81862) (xy 93.134866 93.897677) (xy 93.287593 93.9386) - (xy 93.287595 93.9386) (xy 93.445705 93.9386) (xy 93.445707 93.9386) (xy 93.598434 93.897677) (xy 93.735366 93.81862) - (xy 93.84717 93.706816) (xy 93.926227 93.569884) (xy 93.96715 93.417157) (xy 93.96715 93.274743) - (xy 98.88025 93.274743) (xy 98.88025 93.432857) (xy 98.921173 93.585584) (xy 99.00023 93.722516) - (xy 99.112034 93.83432) (xy 99.248966 93.913377) (xy 99.401693 93.9543) (xy 99.401695 93.9543) (xy 99.559805 93.9543) - (xy 99.559807 93.9543) (xy 99.712534 93.913377) (xy 99.849466 93.83432) (xy 99.96127 93.722516) - (xy 100.040327 93.585584) (xy 100.08125 93.432857) (xy 100.08125 93.274743) (xy 100.040327 93.122016) - (xy 99.96127 92.985084) (xy 99.849466 92.87328) (xy 99.712534 92.794223) (xy 99.559807 92.7533) - (xy 99.401693 92.7533) (xy 99.248966 92.794223) (xy 99.112034 92.87328) (xy 99.00023 92.985084) - (xy 98.921173 93.122016) (xy 98.88025 93.274743) (xy 93.96715 93.274743) (xy 93.96715 93.259043) - (xy 93.926227 93.106316) (xy 93.84717 92.969384) (xy 93.735366 92.85758) (xy 93.598434 92.778523) - (xy 93.445707 92.7376) (xy 93.287593 92.7376) (xy 93.134866 92.778523) (xy 92.997934 92.85758) (xy 92.88613 92.969384) - (xy 92.807073 93.106316) (xy 92.76615 93.259043) (xy 80.814926 93.259043) (xy 80.81492 93.252654) - (xy 80.81294 91.294643) (xy 112.45625 91.294643) (xy 112.45625 91.452757) (xy 112.497173 91.605484) - (xy 112.57623 91.742416) (xy 112.688034 91.85422) (xy 112.824966 91.933277) (xy 112.977693 91.9742) - (xy 112.977695 91.9742) (xy 113.135805 91.9742) (xy 113.135807 91.9742) (xy 113.288534 91.933277) - (xy 113.425466 91.85422) (xy 113.53727 91.742416) (xy 113.544991 91.729043) (xy 117.42375 91.729043) - (xy 117.42375 91.887157) (xy 117.464673 92.039884) (xy 117.54373 92.176816) (xy 117.655534 92.28862) - (xy 117.792466 92.367677) (xy 117.945193 92.4086) (xy 117.945195 92.4086) (xy 118.103305 92.4086) - (xy 118.103307 92.4086) (xy 118.256034 92.367677) (xy 118.392966 92.28862) (xy 118.50477 92.176816) - (xy 118.583827 92.039884) (xy 118.62475 91.887157) (xy 118.62475 91.729043) (xy 118.583827 91.576316) - (xy 118.50477 91.439384) (xy 118.392966 91.32758) (xy 118.256242 91.248643) (xy 123.45395 91.248643) - (xy 123.45395 91.406757) (xy 123.494873 91.559484) (xy 123.57393 91.696416) (xy 123.685734 91.80822) - (xy 123.822666 91.887277) (xy 123.975393 91.9282) (xy 123.975395 91.9282) (xy 124.133505 91.9282) - (xy 124.133507 91.9282) (xy 124.286234 91.887277) (xy 124.289584 91.885343) (xy 125.04875 91.885343) - (xy 125.04875 92.043457) (xy 125.089673 92.196184) (xy 125.16873 92.333116) (xy 125.280534 92.44492) - (xy 125.417466 92.523977) (xy 125.570193 92.5649) (xy 125.570195 92.5649) (xy 125.728305 92.5649) - (xy 125.728307 92.5649) (xy 125.881034 92.523977) (xy 126.017966 92.44492) (xy 126.100443 92.362443) - (xy 127.06505 92.362443) (xy 127.06505 92.520557) (xy 127.105973 92.673284) (xy 127.18503 92.810216) - (xy 127.296834 92.92202) (xy 127.433766 93.001077) (xy 127.586493 93.042) (xy 127.586495 93.042) - (xy 127.744605 93.042) (xy 127.744607 93.042) (xy 127.897334 93.001077) (xy 128.034266 92.92202) - (xy 128.047498 92.908787) (xy 128.102013 92.881012) (xy 128.162445 92.890583) (xy 128.1875 92.908786) - (xy 128.200734 92.92202) (xy 128.337666 93.001077) (xy 128.490393 93.042) (xy 128.490395 93.042) - (xy 128.648505 93.042) (xy 128.648507 93.042) (xy 128.801234 93.001077) (xy 128.938166 92.92202) - (xy 129.007048 92.853137) (xy 129.061563 92.825362) (xy 129.121995 92.834933) (xy 129.14705 92.853136) - (xy 129.234434 92.94052) (xy 129.371366 93.019577) (xy 129.524093 93.0605) (xy 129.524095 93.0605) - (xy 129.682205 93.0605) (xy 129.682207 93.0605) (xy 129.797105 93.029713) (xy 129.858204 93.032915) - (xy 129.905754 93.071421) (xy 129.908462 93.07584) (xy 129.945056 93.139222) (xy 129.96653 93.176416) - (xy 130.078334 93.28822) (xy 130.215266 93.367277) (xy 130.367993 93.4082) (xy 130.367995 93.4082) - (xy 130.526105 93.4082) (xy 130.526107 93.4082) (xy 130.678834 93.367277) (xy 130.815766 93.28822) - (xy 130.823243 93.280743) (xy 154.11495 93.280743) (xy 154.11495 93.438857) (xy 154.155873 93.591584) - (xy 154.23493 93.728516) (xy 154.346734 93.84032) (xy 154.483666 93.919377) (xy 154.636393 93.9603) - (xy 154.636395 93.9603) (xy 154.794505 93.9603) (xy 154.794507 93.9603) (xy 154.947234 93.919377) - (xy 155.084166 93.84032) (xy 155.19597 93.728516) (xy 155.275027 93.591584) (xy 155.31595 93.438857) - (xy 155.31595 93.280743) (xy 155.275027 93.128016) (xy 155.19597 92.991084) (xy 155.084166 92.87928) - (xy 154.968449 92.812471) (xy 154.947235 92.800223) (xy 154.866248 92.778523) (xy 154.794507 92.7593) - (xy 154.636393 92.7593) (xy 154.483666 92.800223) (xy 154.346734 92.87928) (xy 154.23493 92.991084) - (xy 154.155873 93.128016) (xy 154.11495 93.280743) (xy 130.823243 93.280743) (xy 130.92757 93.176416) - (xy 131.006627 93.039484) (xy 131.04755 92.886757) (xy 131.04755 92.728643) (xy 131.006627 92.575916) - (xy 130.92757 92.438984) (xy 130.889329 92.400743) (xy 139.94245 92.400743) (xy 139.94245 92.558857) - (xy 139.983373 92.711584) (xy 140.06243 92.848516) (xy 140.174234 92.96032) (xy 140.311166 93.039377) - (xy 140.463893 93.0803) (xy 140.463895 93.0803) (xy 140.622005 93.0803) (xy 140.622007 93.0803) - (xy 140.774734 93.039377) (xy 140.911666 92.96032) (xy 141.02347 92.848516) (xy 141.091536 92.730622) - (xy 173.01665 92.730622) (xy 173.01665 92.915577) (xy 173.045582 93.098243) (xy 173.102734 93.274141) - (xy 173.186696 93.438927) (xy 173.186701 93.438935) (xy 173.201664 93.459529) (xy 173.79165 92.869543) - (xy 173.79165 92.875761) (xy 173.818909 92.977494) (xy 173.87157 93.068706) (xy 173.946044 93.14318) - (xy 174.037256 93.195841) (xy 174.138989 93.2231) (xy 174.145202 93.2231) (xy 173.555218 93.813084) - (xy 173.575814 93.828048) (xy 173.575822 93.828053) (xy 173.740608 93.912015) (xy 173.916506 93.969167) - (xy 174.099173 93.9981) (xy 174.284127 93.9981) (xy 174.466793 93.969167) (xy 174.642691 93.912015) - (xy 174.807487 93.828047) (xy 174.82808 93.813084) (xy 174.238096 93.2231) (xy 174.244311 93.2231) - (xy 174.346044 93.195841) (xy 174.437256 93.14318) (xy 174.51173 93.068706) (xy 174.564391 92.977494) - (xy 174.59165 92.875761) (xy 174.59165 92.869546) (xy 175.181634 93.45953) (xy 175.196597 93.438937) - (xy 175.280565 93.274141) (xy 175.337717 93.098243) (xy 175.36665 92.915577) (xy 175.36665 92.730622) - (xy 175.337717 92.547956) (xy 175.280565 92.372058) (xy 175.196603 92.207272) (xy 175.196598 92.207264) - (xy 175.181634 92.186668) (xy 174.59165 92.776652) (xy 174.59165 92.770439) (xy 174.564391 92.668706) - (xy 174.51173 92.577494) (xy 174.437256 92.50302) (xy 174.346044 92.450359) (xy 174.244311 92.4231) - (xy 174.238094 92.4231) (xy 174.82808 91.833114) (xy 174.807485 91.818151) (xy 174.807477 91.818146) - (xy 174.759875 91.793892) (xy 174.71661 91.750627) (xy 174.707039 91.690195) (xy 174.734816 91.635678) - (xy 174.74981 91.623372) (xy 174.813495 91.58082) (xy 174.94937 91.444945) (xy 175.056127 91.285173) - (xy 175.129662 91.107643) (xy 175.16715 90.919178) (xy 175.16715 90.727022) (xy 175.129662 90.538557) - (xy 175.056128 90.361029) (xy 175.056128 90.361028) (xy 174.94937 90.201255) (xy 174.813494 90.065379) - (xy 174.65372 89.958621) (xy 174.547355 89.914564) (xy 174.500829 89.874828) (xy 174.486545 89.815333) - (xy 174.50996 89.758805) (xy 174.547355 89.731636) (xy 174.584786 89.716131) (xy 174.653723 89.687577) - (xy 174.813495 89.58082) (xy 174.94937 89.444945) (xy 175.056127 89.285173) (xy 175.129662 89.107643) - (xy 175.16715 88.919178) (xy 175.16715 88.727022) (xy 175.129662 88.538557) (xy 175.056128 88.361029) - (xy 175.056128 88.361028) (xy 174.94937 88.201255) (xy 174.813494 88.065379) (xy 174.65372 87.958621) - (xy 174.547355 87.914564) (xy 174.500829 87.874828) (xy 174.486545 87.815333) (xy 174.50996 87.758805) - (xy 174.547355 87.731636) (xy 174.584786 87.716131) (xy 174.653723 87.687577) (xy 174.813495 87.58082) - (xy 174.94937 87.444945) (xy 175.056127 87.285173) (xy 175.129662 87.107643) (xy 175.16715 86.919178) - (xy 175.16715 86.727022) (xy 175.129662 86.538557) (xy 175.056128 86.361029) (xy 175.056128 86.361028) - (xy 174.94937 86.201255) (xy 174.813494 86.065379) (xy 174.65372 85.958621) (xy 174.547355 85.914564) - (xy 174.500829 85.874828) (xy 174.486545 85.815333) (xy 174.50996 85.758805) (xy 174.547355 85.731636) - (xy 174.584786 85.716131) (xy 174.653723 85.687577) (xy 174.813495 85.58082) (xy 174.94937 85.444945) - (xy 175.056127 85.285173) (xy 175.129662 85.107643) (xy 175.16715 84.919178) (xy 175.16715 84.727022) - (xy 175.129662 84.538557) (xy 175.056128 84.361029) (xy 175.056128 84.361028) (xy 174.94937 84.201255) - (xy 174.813494 84.065379) (xy 174.65372 83.958621) (xy 174.547355 83.914564) (xy 174.500829 83.874828) - (xy 174.486545 83.815333) (xy 174.50996 83.758805) (xy 174.547355 83.731636) (xy 174.584786 83.716131) - (xy 174.653723 83.687577) (xy 174.813495 83.58082) (xy 174.94937 83.444945) (xy 175.056127 83.285173) - (xy 175.129662 83.107643) (xy 175.16715 82.919178) (xy 175.16715 82.727022) (xy 175.129662 82.538557) - (xy 175.086512 82.434384) (xy 175.056128 82.361029) (xy 175.056128 82.361028) (xy 174.94937 82.201255) - (xy 174.813494 82.065379) (xy 174.65372 81.958621) (xy 174.547355 81.914564) (xy 174.500829 81.874828) - (xy 174.486545 81.815333) (xy 174.50996 81.758805) (xy 174.547355 81.731636) (xy 174.602138 81.708944) - (xy 174.653723 81.687577) (xy 174.813495 81.58082) (xy 174.94937 81.444945) (xy 175.056127 81.285173) - (xy 175.129662 81.107643) (xy 175.16715 80.919178) (xy 175.16715 80.727022) (xy 175.129662 80.538557) - (xy 175.056128 80.361029) (xy 175.056128 80.361028) (xy 174.94937 80.201255) (xy 174.813494 80.065379) - (xy 174.65372 79.958621) (xy 174.547355 79.914564) (xy 174.500829 79.874828) (xy 174.486545 79.815333) - (xy 174.50996 79.758805) (xy 174.547355 79.731636) (xy 174.584786 79.716131) (xy 174.653723 79.687577) - (xy 174.813495 79.58082) (xy 174.94937 79.444945) (xy 175.056127 79.285173) (xy 175.129662 79.107643) - (xy 175.16715 78.919178) (xy 175.16715 78.727022) (xy 175.129662 78.538557) (xy 175.088016 78.438015) - (xy 175.056128 78.361029) (xy 175.056128 78.361028) (xy 174.94937 78.201255) (xy 174.813494 78.065379) - (xy 174.65372 77.958621) (xy 174.547355 77.914564) (xy 174.500829 77.874828) (xy 174.486545 77.815333) - (xy 174.50996 77.758805) (xy 174.547355 77.731636) (xy 174.622321 77.700584) (xy 174.653723 77.687577) - (xy 174.813495 77.58082) (xy 174.94937 77.444945) (xy 175.056127 77.285173) (xy 175.129662 77.107643) - (xy 175.16715 76.919178) (xy 175.16715 76.727022) (xy 175.129662 76.538557) (xy 175.056128 76.361029) - (xy 175.056128 76.361028) (xy 174.94937 76.201255) (xy 174.813494 76.065379) (xy 174.685587 75.979914) - (xy 174.647708 75.931864) (xy 174.645306 75.870726) (xy 174.679299 75.819852) (xy 174.736703 75.798675) - (xy 174.740582 75.798599) (xy 174.911514 75.798599) (xy 174.936641 75.795685) (xy 175.039415 75.750306) - (xy 175.118856 75.670865) (xy 175.164235 75.568091) (xy 175.16715 75.542965) (xy 175.167149 74.103236) - (xy 175.167148 74.10323) (xy 195.56615 74.10323) (xy 195.56615 75.54296) (xy 195.566151 75.542963) - (xy 195.569064 75.56809) (xy 195.594406 75.625485) (xy 195.614444 75.670865) (xy 195.693885 75.750306) - (xy 195.796659 75.795685) (xy 195.821785 75.7986) (xy 195.99271 75.798599) (xy 196.050899 75.817506) - (xy 196.086863 75.867006) (xy 196.086864 75.928191) (xy 196.0509 75.977691) (xy 196.047711 75.979914) - (xy 195.919805 76.065379) (xy 195.783929 76.201255) (xy 195.677171 76.361028) (xy 195.677171 76.361029) - (xy 195.603638 76.538555) (xy 195.603638 76.538557) (xy 195.56615 76.727019) (xy 195.56615 76.727022) - (xy 195.56615 76.919178) (xy 195.602325 77.101044) (xy 195.603638 77.107642) (xy 195.603638 77.107644) - (xy 195.677171 77.28517) (xy 195.677171 77.285171) (xy 195.783929 77.444944) (xy 195.919805 77.58082) - (xy 196.079577 77.687577) (xy 196.185945 77.731636) (xy 196.23247 77.771373) (xy 196.246754 77.830867) - (xy 196.223339 77.887395) (xy 196.185945 77.914564) (xy 196.079577 77.958622) (xy 195.919805 78.065379) - (xy 195.783929 78.201255) (xy 195.677171 78.361028) (xy 195.677171 78.361029) (xy 195.603638 78.538555) - (xy 195.603638 78.538557) (xy 195.56615 78.727019) (xy 195.56615 78.91918) (xy 195.579987 78.98874) - (xy 195.598175 79.080181) (xy 195.603638 79.107642) (xy 195.603638 79.107644) (xy 195.677171 79.28517) - (xy 195.677171 79.285171) (xy 195.783929 79.444944) (xy 195.919805 79.58082) (xy 196.079577 79.687577) - (xy 196.185945 79.731636) (xy 196.23247 79.771373) (xy 196.246754 79.830867) (xy 196.223339 79.887395) - (xy 196.185945 79.914564) (xy 196.079577 79.958622) (xy 195.919805 80.065379) (xy 195.783929 80.201255) - (xy 195.677171 80.361028) (xy 195.677171 80.361029) (xy 195.603638 80.538555) (xy 195.603638 80.538557) - (xy 195.56615 80.727019) (xy 195.56615 80.91918) (xy 195.591142 81.044821) (xy 195.595359 81.066024) - (xy 195.603638 81.107642) (xy 195.603638 81.107644) (xy 195.677171 81.28517) (xy 195.677171 81.285171) - (xy 195.783929 81.444944) (xy 195.919805 81.58082) (xy 196.079577 81.687577) (xy 196.185945 81.731636) - (xy 196.23247 81.771373) (xy 196.246754 81.830867) (xy 196.223339 81.887395) (xy 196.185945 81.914564) - (xy 196.079577 81.958622) (xy 195.919805 82.065379) (xy 195.783929 82.201255) (xy 195.677171 82.361028) - (xy 195.677171 82.361029) (xy 195.603638 82.538555) (xy 195.603638 82.538557) (xy 195.56615 82.727019) - (xy 195.56615 82.91918) (xy 195.603638 83.107642) (xy 195.603638 83.107644) (xy 195.677171 83.28517) - (xy 195.677171 83.285171) (xy 195.783929 83.444944) (xy 195.919805 83.58082) (xy 196.079577 83.687577) - (xy 196.185945 83.731636) (xy 196.23247 83.771373) (xy 196.246754 83.830867) (xy 196.223339 83.887395) - (xy 196.185945 83.914564) (xy 196.079577 83.958622) (xy 195.919805 84.065379) (xy 195.783929 84.201255) - (xy 195.677171 84.361028) (xy 195.677171 84.361029) (xy 195.603638 84.538555) (xy 195.603638 84.538557) - (xy 195.56615 84.727019) (xy 195.56615 84.91918) (xy 195.603638 85.107642) (xy 195.603638 85.107644) - (xy 195.677171 85.28517) (xy 195.677171 85.285171) (xy 195.783929 85.444944) (xy 195.919805 85.58082) - (xy 196.079577 85.687577) (xy 196.185945 85.731636) (xy 196.23247 85.771373) (xy 196.246754 85.830867) - (xy 196.223339 85.887395) (xy 196.185945 85.914564) (xy 196.079577 85.958622) (xy 195.919805 86.065379) - (xy 195.783929 86.201255) (xy 195.677171 86.361028) (xy 195.677171 86.361029) (xy 195.603638 86.538555) - (xy 195.603638 86.538557) (xy 195.56615 86.727019) (xy 195.56615 86.91918) (xy 195.603638 87.107642) - (xy 195.603638 87.107644) (xy 195.677171 87.28517) (xy 195.677171 87.285171) (xy 195.783929 87.444944) - (xy 195.919805 87.58082) (xy 196.079577 87.687577) (xy 196.185945 87.731636) (xy 196.23247 87.771373) - (xy 196.246754 87.830867) (xy 196.223339 87.887395) (xy 196.185945 87.914564) (xy 196.079577 87.958622) - (xy 195.919805 88.065379) (xy 195.783929 88.201255) (xy 195.677171 88.361028) (xy 195.677171 88.361029) - (xy 195.603638 88.538555) (xy 195.603638 88.538557) (xy 195.56615 88.727019) (xy 195.56615 88.91918) - (xy 195.603638 89.107642) (xy 195.603638 89.107644) (xy 195.677171 89.28517) (xy 195.677171 89.285171) - (xy 195.783929 89.444944) (xy 195.919805 89.58082) (xy 196.079577 89.687577) (xy 196.185945 89.731636) - (xy 196.23247 89.771373) (xy 196.246754 89.830867) (xy 196.223339 89.887395) (xy 196.185945 89.914564) - (xy 196.079577 89.958622) (xy 195.919805 90.065379) (xy 195.783929 90.201255) (xy 195.677171 90.361028) - (xy 195.677171 90.361029) (xy 195.603638 90.538555) (xy 195.603638 90.538557) (xy 195.56615 90.727019) - (xy 195.56615 90.91918) (xy 195.574068 90.958984) (xy 195.601305 91.095916) (xy 195.603638 91.107642) - (xy 195.603638 91.107644) (xy 195.677171 91.28517) (xy 195.677171 91.285171) (xy 195.783929 91.444944) - (xy 195.919805 91.58082) (xy 196.079577 91.687577) (xy 196.185945 91.731636) (xy 196.23247 91.771373) - (xy 196.246754 91.830867) (xy 196.223339 91.887395) (xy 196.185945 91.914564) (xy 196.079577 91.958622) - (xy 195.919805 92.065379) (xy 195.783929 92.201255) (xy 195.677171 92.361028) (xy 195.677171 92.361029) - (xy 195.603638 92.538555) (xy 195.603638 92.538557) (xy 195.56615 92.727019) (xy 195.56615 92.91918) - (xy 195.603638 93.107642) (xy 195.603638 93.107644) (xy 195.677171 93.28517) (xy 195.677171 93.285171) - (xy 195.783929 93.444944) (xy 195.78393 93.444945) (xy 195.919805 93.58082) (xy 196.079577 93.687577) - (xy 196.257107 93.761112) (xy 196.445572 93.7986) (xy 196.445573 93.7986) (xy 196.637727 93.7986) - (xy 196.637728 93.7986) (xy 196.826193 93.761112) (xy 197.003723 93.687577) (xy 197.163495 93.58082) - (xy 197.29937 93.444945) (xy 197.406127 93.285173) (xy 197.479662 93.107643) (xy 197.49718 93.019577) - (xy 197.508966 92.96032) (xy 197.51715 92.919178) (xy 197.51715 92.727022) (xy 197.486533 92.573099) - (xy 208.739418 92.573099) (xy 208.739419 92.5731) (xy 209.787504 92.5731) (xy 209.74902 92.639757) - (xy 209.71665 92.760565) (xy 209.71665 92.885635) (xy 209.74902 93.006443) (xy 209.787504 93.0731) - (xy 208.739419 93.0731) (xy 208.749891 93.139222) (xy 208.815554 93.341315) (xy 208.912025 93.530652) - (xy 209.036927 93.702564) (xy 209.187185 93.852822) (xy 209.359098 93.977724) (xy 209.391008 93.993983) - (xy 209.434273 94.037248) (xy 209.443844 94.09768) (xy 209.416067 94.152197) (xy 209.36155 94.179974) - (xy 209.357869 94.180487) (xy 209.335083 94.183223) (xy 209.19431 94.238737) (xy 209.194306 94.23874) - (xy 209.073731 94.330175) (xy 209.073725 94.330181) (xy 208.98229 94.450756) (xy 208.982287 94.45076) - (xy 208.926773 94.591534) (xy 208.91615 94.679993) (xy 208.91615 95.966206) (xy 208.926773 96.054665) - (xy 208.982287 96.195439) (xy 208.982288 96.195441) (xy 208.982289 96.195442) (xy 209.073728 96.316022) - (xy 209.194308 96.407461) (xy 209.194309 96.407461) (xy 209.19431 96.407462) (xy 209.209926 96.41362) - (xy 209.335086 96.462977) (xy 209.423548 96.4736) (xy 209.42355 96.4736) (xy 210.95975 96.4736) - (xy 210.959752 96.4736) (xy 211.048214 96.462977) (xy 211.188992 96.407461) (xy 211.309572 96.316022) - (xy 211.401011 96.195442) (xy 211.456527 96.054664) (xy 211.46715 95.966202) (xy 211.46715 94.679998) - (xy 211.456527 94.591536) (xy 211.417202 94.491815) (xy 211.401012 94.45076) (xy 211.401011 94.450759) - (xy 211.401011 94.450758) (xy 211.309572 94.330178) (xy 211.188992 94.238739) (xy 211.188991 94.238738) - (xy 211.188989 94.238737) (xy 211.048216 94.183223) (xy 211.025431 94.180487) (xy 210.96991 94.154775) - (xy 210.940105 94.10134) (xy 210.947401 94.040591) (xy 210.989011 93.995733) (xy 210.992292 93.993983) - (xy 211.024199 93.977725) (xy 211.0242 93.977725) (xy 211.196114 93.852822) (xy 211.346372 93.702564) - (xy 211.471274 93.530652) (xy 211.567745 93.341315) (xy 211.633408 93.139222) (xy 211.643881 93.0731) - (xy 210.595796 93.0731) (xy 210.63428 93.006443) (xy 210.66665 92.885635) (xy 210.66665 92.760565) - (xy 210.63428 92.639757) (xy 210.595796 92.5731) (xy 211.643881 92.5731) (xy 211.643881 92.573099) - (xy 211.633408 92.506977) (xy 211.567745 92.304884) (xy 211.471274 92.115547) (xy 211.346372 91.943635) - (xy 211.196114 91.793377) (xy 211.024202 91.668475) (xy 210.834859 91.572001) (xy 210.796476 91.55953) - (xy 210.746976 91.523566) (xy 210.728069 91.465376) (xy 210.746977 91.407185) (xy 210.782122 91.377166) - (xy 210.919644 91.307096) (xy 211.066151 91.200653) (xy 211.194203 91.072601) (xy 211.300646 90.926094) - (xy 211.382861 90.764739) (xy 211.438821 90.592509) (xy 211.46715 90.413646) (xy 211.46715 90.232554) - (xy 211.46715 90.23255) (xy 211.438821 90.053693) (xy 211.438821 90.053691) (xy 211.382861 89.881461) - (xy 211.300646 89.720106) (xy 211.194203 89.573599) (xy 211.066151 89.445547) (xy 210.919644 89.339104) - (xy 210.919643 89.339103) (xy 210.919641 89.339102) (xy 210.758287 89.256888) (xy 210.586056 89.200928) - (xy 210.407199 89.1726) (xy 210.407196 89.1726) (xy 209.976104 89.1726) (xy 209.976101 89.1726) - (xy 209.797243 89.200928) (xy 209.625012 89.256888) (xy 209.463658 89.339102) (xy 209.390402 89.392325) - (xy 209.317149 89.445547) (xy 209.189097 89.573599) (xy 209.135875 89.646852) (xy 209.082652 89.720108) - (xy 209.000438 89.881462) (xy 208.944478 90.053693) (xy 208.91615 90.23255) (xy 208.91615 90.413649) - (xy 208.944478 90.592506) (xy 209.000438 90.764737) (xy 209.025601 90.814123) (xy 209.082654 90.926094) - (xy 209.189097 91.072601) (xy 209.317149 91.200653) (xy 209.463656 91.307096) (xy 209.463658 91.307097) - (xy 209.601175 91.377166) (xy 209.64444 91.420431) (xy 209.654011 91.480863) (xy 209.626233 91.53538) - (xy 209.586824 91.55953) (xy 209.548438 91.572002) (xy 209.359097 91.668475) (xy 209.187185 91.793377) - (xy 209.036927 91.943635) (xy 208.912025 92.115547) (xy 208.815554 92.304884) (xy 208.749891 92.506977) - (xy 208.739418 92.573099) (xy 197.486533 92.573099) (xy 197.479662 92.538557) (xy 197.440876 92.444919) - (xy 197.406128 92.361029) (xy 197.406128 92.361028) (xy 197.29937 92.201255) (xy 197.163494 92.065379) - (xy 197.00372 91.958621) (xy 196.897355 91.914564) (xy 196.850829 91.874828) (xy 196.836545 91.815333) - (xy 196.85996 91.758805) (xy 196.897355 91.731636) (xy 196.934786 91.716131) (xy 197.003723 91.687577) - (xy 197.163495 91.58082) (xy 197.29937 91.444945) (xy 197.406127 91.285173) (xy 197.479662 91.107643) - (xy 197.51715 90.919178) (xy 197.51715 90.727022) (xy 197.479662 90.538557) (xy 197.406128 90.361029) - (xy 197.406128 90.361028) (xy 197.29937 90.201255) (xy 197.163494 90.065379) (xy 197.00372 89.958621) - (xy 196.897355 89.914564) (xy 196.850829 89.874828) (xy 196.836545 89.815333) (xy 196.85996 89.758805) - (xy 196.897355 89.731636) (xy 196.934786 89.716131) (xy 197.003723 89.687577) (xy 197.163495 89.58082) - (xy 197.29937 89.444945) (xy 197.406127 89.285173) (xy 197.479662 89.107643) (xy 197.51715 88.919178) - (xy 197.51715 88.727022) (xy 197.479662 88.538557) (xy 197.406128 88.361029) (xy 197.406128 88.361028) - (xy 197.29937 88.201255) (xy 197.163494 88.065379) (xy 197.00372 87.958621) (xy 196.897355 87.914564) - (xy 196.850829 87.874828) (xy 196.836545 87.815333) (xy 196.85996 87.758805) (xy 196.896097 87.73255) - (xy 208.91615 87.73255) (xy 208.91615 87.913649) (xy 208.944478 88.092506) (xy 209.000438 88.264737) - (xy 209.064772 88.391) (xy 209.082654 88.426094) (xy 209.189097 88.572601) (xy 209.317149 88.700653) - (xy 209.463656 88.807096) (xy 209.625011 88.889311) (xy 209.797241 88.945271) (xy 209.868786 88.956602) - (xy 209.976101 88.9736) (xy 209.976104 88.9736) (xy 210.407199 88.9736) (xy 210.496627 88.959435) - (xy 210.586059 88.945271) (xy 210.758289 88.889311) (xy 210.919644 88.807096) (xy 211.066151 88.700653) - (xy 211.194203 88.572601) (xy 211.300646 88.426094) (xy 211.382861 88.264739) (xy 211.438821 88.092509) - (xy 211.452985 88.003077) (xy 211.46715 87.913649) (xy 211.46715 87.73255) (xy 211.438821 87.553693) - (xy 211.438821 87.553691) (xy 211.382861 87.381461) (xy 211.300646 87.220106) (xy 211.194203 87.073599) - (xy 211.066151 86.945547) (xy 210.919644 86.839104) (xy 210.919643 86.839103) (xy 210.919641 86.839102) - (xy 210.758287 86.756888) (xy 210.586056 86.700928) (xy 210.407199 86.6726) (xy 210.407196 86.6726) - (xy 209.976104 86.6726) (xy 209.976101 86.6726) (xy 209.797243 86.700928) (xy 209.625012 86.756888) - (xy 209.463658 86.839102) (xy 209.390402 86.892325) (xy 209.317149 86.945547) (xy 209.189097 87.073599) - (xy 209.164363 87.107643) (xy 209.082652 87.220108) (xy 209.000438 87.381462) (xy 208.944478 87.553693) - (xy 208.91615 87.73255) (xy 196.896097 87.73255) (xy 196.897355 87.731636) (xy 196.915125 87.724275) - (xy 197.003723 87.687577) (xy 197.163495 87.58082) (xy 197.29937 87.444945) (xy 197.406127 87.285173) - (xy 197.479662 87.107643) (xy 197.51715 86.919178) (xy 197.51715 86.727022) (xy 197.479662 86.538557) - (xy 197.406128 86.361029) (xy 197.406128 86.361028) (xy 197.29937 86.201255) (xy 197.163494 86.065379) - (xy 197.00372 85.958621) (xy 196.897355 85.914564) (xy 196.850829 85.874828) (xy 196.836545 85.815333) - (xy 196.85996 85.758805) (xy 196.897355 85.731636) (xy 196.934786 85.716131) (xy 197.003723 85.687577) - (xy 197.163495 85.58082) (xy 197.29937 85.444945) (xy 197.406127 85.285173) (xy 197.479662 85.107643) - (xy 197.51715 84.919178) (xy 197.51715 84.727022) (xy 197.479662 84.538557) (xy 197.406128 84.361029) - (xy 197.406128 84.361028) (xy 197.29937 84.201255) (xy 197.163494 84.065379) (xy 197.00372 83.958621) - (xy 196.897355 83.914564) (xy 196.850829 83.874828) (xy 196.836545 83.815333) (xy 196.85996 83.758805) - (xy 196.897355 83.731636) (xy 196.934786 83.716131) (xy 197.003723 83.687577) (xy 197.163495 83.58082) - (xy 197.29937 83.444945) (xy 197.406127 83.285173) (xy 197.479662 83.107643) (xy 197.51715 82.919178) - (xy 197.51715 82.727022) (xy 197.479662 82.538557) (xy 197.436512 82.434384) (xy 197.406128 82.361029) - (xy 197.406128 82.361028) (xy 197.29937 82.201255) (xy 197.163494 82.065379) (xy 197.00372 81.958621) - (xy 196.897355 81.914564) (xy 196.850829 81.874828) (xy 196.836545 81.815333) (xy 196.85996 81.758805) - (xy 196.897355 81.731636) (xy 196.952138 81.708944) (xy 197.003723 81.687577) (xy 197.163495 81.58082) - (xy 197.29937 81.444945) (xy 197.406127 81.285173) (xy 197.479662 81.107643) (xy 197.51715 80.919178) - (xy 197.51715 80.727022) (xy 197.479662 80.538557) (xy 197.406128 80.361029) (xy 197.406128 80.361028) - (xy 197.29937 80.201255) (xy 197.163494 80.065379) (xy 197.00372 79.958621) (xy 196.897355 79.914564) - (xy 196.850829 79.874828) (xy 196.836545 79.815333) (xy 196.85996 79.758805) (xy 196.897355 79.731636) - (xy 196.934786 79.716131) (xy 197.003723 79.687577) (xy 197.163495 79.58082) (xy 197.29937 79.444945) - (xy 197.406127 79.285173) (xy 197.479662 79.107643) (xy 197.51715 78.919178) (xy 197.51715 78.727022) - (xy 197.479662 78.538557) (xy 197.438016 78.438015) (xy 197.406128 78.361029) (xy 197.406128 78.361028) - (xy 197.29937 78.201255) (xy 197.163494 78.065379) (xy 197.00372 77.958621) (xy 196.897355 77.914564) - (xy 196.879729 77.89951) (xy 196.859959 77.887395) (xy 196.856902 77.880014) (xy 196.850829 77.874828) - (xy 196.845417 77.852286) (xy 196.836545 77.830867) (xy 196.838409 77.8231) (xy 196.836545 77.815333) - (xy 196.845416 77.793915) (xy 196.850829 77.771372) (xy 196.856903 77.766184) (xy 196.85996 77.758805) - (xy 196.897355 77.731636) (xy 196.968795 77.702045) (xy 196.990821 77.69292) (xy 197.003723 77.687577) - (xy 197.163495 77.58082) (xy 197.29937 77.444945) (xy 197.380785 77.323099) (xy 208.689418 77.323099) - (xy 208.689419 77.3231) (xy 209.733638 77.3231) (xy 209.700725 77.380107) (xy 209.66665 77.507274) - (xy 209.66665 77.638926) (xy 209.700725 77.766093) (xy 209.733638 77.8231) (xy 208.689419 77.8231) - (xy 208.699891 77.889222) (xy 208.765554 78.091315) (xy 208.862025 78.280652) (xy 208.986927 78.452564) - (xy 209.137185 78.602822) (xy 209.309098 78.727724) (xy 209.341008 78.743983) (xy 209.384273 78.787248) - (xy 209.393844 78.84768) (xy 209.366067 78.902197) (xy 209.31155 78.929974) (xy 209.307869 78.930487) - (xy 209.285083 78.933223) (xy 209.14431 78.988737) (xy 209.144306 78.98874) (xy 209.023731 79.080175) - (xy 209.023725 79.080181) (xy 208.93229 79.200756) (xy 208.932287 79.20076) (xy 208.876773 79.341534) - (xy 208.86615 79.429993) (xy 208.86615 80.716206) (xy 208.876773 80.804665) (xy 208.932287 80.945439) - (xy 208.932288 80.945441) (xy 208.932289 80.945442) (xy 209.023728 81.066022) (xy 209.144308 81.157461) - (xy 209.144309 81.157461) (xy 209.14431 81.157462) (xy 209.214697 81.185219) (xy 209.285086 81.212977) - (xy 209.373548 81.2236) (xy 209.37355 81.2236) (xy 210.95975 81.2236) (xy 210.959752 81.2236) (xy 211.048214 81.212977) - (xy 211.188992 81.157461) (xy 211.309572 81.066022) (xy 211.401011 80.945442) (xy 211.456527 80.804664) - (xy 211.46715 80.716202) (xy 211.46715 79.429998) (xy 211.456527 79.341536) (xy 211.401011 79.200758) - (xy 211.309572 79.080178) (xy 211.188992 78.988739) (xy 211.188991 78.988738) (xy 211.188989 78.988737) - (xy 211.048216 78.933223) (xy 211.025431 78.930487) (xy 210.96991 78.904775) (xy 210.940105 78.85134) - (xy 210.947401 78.790591) (xy 210.989011 78.745733) (xy 210.992292 78.743983) (xy 211.024199 78.727725) - (xy 211.0242 78.727725) (xy 211.196114 78.602822) (xy 211.346372 78.452564) (xy 211.471274 78.280652) - (xy 211.567745 78.091315) (xy 211.633408 77.889222) (xy 211.643881 77.8231) (xy 210.599662 77.8231) - (xy 210.632575 77.766093) (xy 210.66665 77.638926) (xy 210.66665 77.507274) (xy 210.632575 77.380107) - (xy 210.599662 77.3231) (xy 211.643881 77.3231) (xy 211.643881 77.323099) (xy 211.633408 77.256977) - (xy 211.567745 77.054884) (xy 211.471274 76.865547) (xy 211.346372 76.693635) (xy 211.196114 76.543377) - (xy 211.024202 76.418475) (xy 210.834865 76.322004) (xy 210.632771 76.25634) (xy 210.4229 76.2231) - (xy 210.416651 76.2231) (xy 210.41665 76.223101) (xy 210.41665 77.140088) (xy 210.359643 77.107175) - (xy 210.232476 77.0731) (xy 210.100824 77.0731) (xy 209.973657 77.107175) (xy 209.91665 77.140088) - (xy 209.91665 76.223101) (xy 209.916649 76.2231) (xy 209.9104 76.2231) (xy 209.700528 76.25634) - (xy 209.498434 76.322004) (xy 209.309097 76.418475) (xy 209.137185 76.543377) (xy 208.986927 76.693635) - (xy 208.862025 76.865547) (xy 208.765554 77.054884) (xy 208.699891 77.256977) (xy 208.689418 77.323099) - (xy 197.380785 77.323099) (xy 197.406127 77.285173) (xy 197.479662 77.107643) (xy 197.51715 76.919178) - (xy 197.51715 76.727022) (xy 197.479662 76.538557) (xy 197.406128 76.361029) (xy 197.406128 76.361028) - (xy 197.29937 76.201255) (xy 197.163494 76.065379) (xy 197.035587 75.979914) (xy 196.997708 75.931864) - (xy 196.995306 75.870726) (xy 197.029299 75.819852) (xy 197.086703 75.798675) (xy 197.090582 75.798599) - (xy 197.261514 75.798599) (xy 197.286641 75.795685) (xy 197.389415 75.750306) (xy 197.468856 75.670865) - (xy 197.514235 75.568091) (xy 197.51715 75.542965) (xy 197.517149 74.103236) (xy 197.514235 74.078109) - (xy 197.468856 73.975335) (xy 197.389415 73.895894) (xy 197.286641 73.850515) (xy 197.28664 73.850514) - (xy 197.286638 73.850514) (xy 197.261518 73.8476) (xy 195.821789 73.8476) (xy 195.821786 73.847601) - (xy 195.796659 73.850514) (xy 195.693885 73.895894) (xy 195.614444 73.975335) (xy 195.569064 74.078111) - (xy 195.56615 74.10323) (xy 175.167148 74.10323) (xy 175.164235 74.078109) (xy 175.118856 73.975335) - (xy 175.039415 73.895894) (xy 174.936641 73.850515) (xy 174.93664 73.850514) (xy 174.936638 73.850514) - (xy 174.911518 73.8476) (xy 173.471789 73.8476) (xy 173.471786 73.847601) (xy 173.446659 73.850514) - (xy 173.343885 73.895894) (xy 173.264444 73.975335) (xy 173.219064 74.078111) (xy 173.21615 74.10323) - (xy 173.21615 75.54296) (xy 173.216151 75.542963) (xy 173.219064 75.56809) (xy 173.244406 75.625485) - (xy 173.264444 75.670865) (xy 173.343885 75.750306) (xy 173.446659 75.795685) (xy 173.471785 75.7986) - (xy 173.64271 75.798599) (xy 173.700899 75.817506) (xy 173.736863 75.867006) (xy 173.736864 75.928191) - (xy 173.7009 75.977691) (xy 173.697711 75.979914) (xy 173.569805 76.065379) (xy 173.433929 76.201255) - (xy 173.327171 76.361028) (xy 173.327171 76.361029) (xy 173.253638 76.538555) (xy 173.253638 76.538557) - (xy 173.21615 76.727019) (xy 173.21615 76.727022) (xy 173.21615 76.919178) (xy 173.252325 77.101044) - (xy 173.253638 77.107642) (xy 173.253638 77.107644) (xy 173.327171 77.28517) (xy 173.327171 77.285171) - (xy 173.433929 77.444944) (xy 173.569805 77.58082) (xy 173.729577 77.687577) (xy 173.835945 77.731636) - (xy 173.88247 77.771373) (xy 173.896754 77.830867) (xy 173.873339 77.887395) (xy 173.835945 77.914564) - (xy 173.729577 77.958622) (xy 173.569805 78.065379) (xy 173.433929 78.201255) (xy 173.327171 78.361028) - (xy 173.327171 78.361029) (xy 173.253638 78.538555) (xy 173.253638 78.538557) (xy 173.21615 78.727019) - (xy 173.21615 78.91918) (xy 173.229987 78.98874) (xy 173.248175 79.080181) (xy 173.253638 79.107642) - (xy 173.253638 79.107644) (xy 173.327171 79.28517) (xy 173.327171 79.285171) (xy 173.433929 79.444944) - (xy 173.569805 79.58082) (xy 173.729577 79.687577) (xy 173.835945 79.731636) (xy 173.88247 79.771373) - (xy 173.896754 79.830867) (xy 173.873339 79.887395) (xy 173.835945 79.914564) (xy 173.729577 79.958622) - (xy 173.569805 80.065379) (xy 173.433929 80.201255) (xy 173.327171 80.361028) (xy 173.327171 80.361029) - (xy 173.253638 80.538555) (xy 173.253638 80.538557) (xy 173.21615 80.727019) (xy 173.21615 80.91918) - (xy 173.241142 81.044821) (xy 173.245359 81.066024) (xy 173.253638 81.107642) (xy 173.253638 81.107644) - (xy 173.327171 81.28517) (xy 173.327171 81.285171) (xy 173.433929 81.444944) (xy 173.569805 81.58082) - (xy 173.729577 81.687577) (xy 173.835945 81.731636) (xy 173.88247 81.771373) (xy 173.896754 81.830867) - (xy 173.873339 81.887395) (xy 173.835945 81.914564) (xy 173.729577 81.958622) (xy 173.569805 82.065379) - (xy 173.433929 82.201255) (xy 173.327171 82.361028) (xy 173.327171 82.361029) (xy 173.253638 82.538555) - (xy 173.253638 82.538557) (xy 173.21615 82.727019) (xy 173.21615 82.91918) (xy 173.253638 83.107642) - (xy 173.253638 83.107644) (xy 173.327171 83.28517) (xy 173.327171 83.285171) (xy 173.433929 83.444944) - (xy 173.569805 83.58082) (xy 173.729577 83.687577) (xy 173.835945 83.731636) (xy 173.88247 83.771373) - (xy 173.896754 83.830867) (xy 173.873339 83.887395) (xy 173.835945 83.914564) (xy 173.729577 83.958622) - (xy 173.569805 84.065379) (xy 173.433929 84.201255) (xy 173.327171 84.361028) (xy 173.327171 84.361029) - (xy 173.253638 84.538555) (xy 173.253638 84.538557) (xy 173.21615 84.727019) (xy 173.21615 84.91918) - (xy 173.253638 85.107642) (xy 173.253638 85.107644) (xy 173.327171 85.28517) (xy 173.327171 85.285171) - (xy 173.433929 85.444944) (xy 173.569805 85.58082) (xy 173.729577 85.687577) (xy 173.835945 85.731636) - (xy 173.88247 85.771373) (xy 173.896754 85.830867) (xy 173.873339 85.887395) (xy 173.835945 85.914564) - (xy 173.729577 85.958622) (xy 173.569805 86.065379) (xy 173.433929 86.201255) (xy 173.327171 86.361028) - (xy 173.327171 86.361029) (xy 173.253638 86.538555) (xy 173.253638 86.538557) (xy 173.21615 86.727019) - (xy 173.21615 86.91918) (xy 173.253638 87.107642) (xy 173.253638 87.107644) (xy 173.327171 87.28517) - (xy 173.327171 87.285171) (xy 173.433929 87.444944) (xy 173.569805 87.58082) (xy 173.729577 87.687577) - (xy 173.835945 87.731636) (xy 173.88247 87.771373) (xy 173.896754 87.830867) (xy 173.873339 87.887395) - (xy 173.835945 87.914564) (xy 173.729577 87.958622) (xy 173.569805 88.065379) (xy 173.433929 88.201255) - (xy 173.327171 88.361028) (xy 173.327171 88.361029) (xy 173.253638 88.538555) (xy 173.253638 88.538557) - (xy 173.21615 88.727019) (xy 173.21615 88.91918) (xy 173.253638 89.107642) (xy 173.253638 89.107644) - (xy 173.327171 89.28517) (xy 173.327171 89.285171) (xy 173.433929 89.444944) (xy 173.569805 89.58082) - (xy 173.729577 89.687577) (xy 173.835945 89.731636) (xy 173.88247 89.771373) (xy 173.896754 89.830867) - (xy 173.873339 89.887395) (xy 173.835945 89.914564) (xy 173.729577 89.958622) (xy 173.569805 90.065379) - (xy 173.433929 90.201255) (xy 173.327171 90.361028) (xy 173.327171 90.361029) (xy 173.253638 90.538555) - (xy 173.253638 90.538557) (xy 173.21615 90.727019) (xy 173.21615 90.91918) (xy 173.224068 90.958984) - (xy 173.251305 91.095916) (xy 173.253638 91.107642) (xy 173.253638 91.107644) (xy 173.327171 91.28517) - (xy 173.327171 91.285171) (xy 173.396756 91.389311) (xy 173.43393 91.444945) (xy 173.569805 91.58082) - (xy 173.63348 91.623367) (xy 173.67136 91.671416) (xy 173.673762 91.732555) (xy 173.639769 91.783428) - (xy 173.623425 91.793891) (xy 173.575821 91.818146) (xy 173.555218 91.833114) (xy 174.145204 92.4231) - (xy 174.138989 92.4231) (xy 174.037256 92.450359) (xy 173.946044 92.50302) (xy 173.87157 92.577494) - (xy 173.818909 92.668706) (xy 173.79165 92.770439) (xy 173.79165 92.776654) (xy 173.201664 92.186668) - (xy 173.186698 92.207268) (xy 173.102734 92.372058) (xy 173.045582 92.547956) (xy 173.01665 92.730622) - (xy 141.091536 92.730622) (xy 141.102527 92.711584) (xy 141.14345 92.558857) (xy 141.14345 92.400743) - (xy 141.102527 92.248016) (xy 141.02347 92.111084) (xy 140.911666 91.99928) (xy 140.774734 91.920223) - (xy 140.622007 91.8793) (xy 140.463893 91.8793) (xy 140.311166 91.920223) (xy 140.174234 91.99928) - (xy 140.06243 92.111084) (xy 139.983373 92.248016) (xy 139.94245 92.400743) (xy 130.889329 92.400743) - (xy 130.815766 92.32718) (xy 130.678834 92.248123) (xy 130.526107 92.2072) (xy 130.367993 92.2072) - (xy 130.253094 92.237986) (xy 130.191995 92.234784) (xy 130.144445 92.196279) (xy 130.141753 92.191889) - (xy 130.08367 92.091284) (xy 129.971866 91.97948) (xy 129.834934 91.900423) (xy 129.682207 91.8595) - (xy 129.524093 91.8595) (xy 129.371366 91.900423) (xy 129.234434 91.97948) (xy 129.165551 92.048362) - (xy 129.111037 92.076138) (xy 129.050605 92.066567) (xy 129.025549 92.048363) (xy 128.938166 91.96098) - (xy 128.801234 91.881923) (xy 128.648507 91.841) (xy 128.490393 91.841) (xy 128.337666 91.881923) - (xy 128.200734 91.96098) (xy 128.200733 91.960981) (xy 128.187502 91.974212) (xy 128.132984 92.001988) - (xy 128.072552 91.992414) (xy 128.047498 91.974212) (xy 128.047486 91.9742) (xy 128.034266 91.96098) - (xy 127.897334 91.881923) (xy 127.744607 91.841) (xy 127.586493 91.841) (xy 127.433766 91.881923) - (xy 127.296834 91.96098) (xy 127.18503 92.072784) (xy 127.105973 92.209716) (xy 127.06505 92.362443) - (xy 126.100443 92.362443) (xy 126.12977 92.333116) (xy 126.208827 92.196184) (xy 126.24975 92.043457) - (xy 126.24975 91.885343) (xy 126.222607 91.784043) (xy 163.19115 91.784043) (xy 163.19115 91.942157) - (xy 163.232073 92.094884) (xy 163.31113 92.231816) (xy 163.422934 92.34362) (xy 163.559866 92.422677) - (xy 163.712593 92.4636) (xy 163.712595 92.4636) (xy 163.870705 92.4636) (xy 163.870707 92.4636) - (xy 164.023434 92.422677) (xy 164.160366 92.34362) (xy 164.27217 92.231816) (xy 164.351227 92.094884) - (xy 164.39215 91.942157) (xy 164.39215 91.784043) (xy 164.351227 91.631316) (xy 164.27217 91.494384) - (xy 164.160366 91.38258) (xy 164.023434 91.303523) (xy 163.870707 91.2626) (xy 163.712593 91.2626) - (xy 163.559866 91.303523) (xy 163.422934 91.38258) (xy 163.31113 91.494384) (xy 163.232073 91.631316) - (xy 163.19115 91.784043) (xy 126.222607 91.784043) (xy 126.208827 91.732616) (xy 126.12977 91.595684) - (xy 126.017966 91.48388) (xy 125.881034 91.404823) (xy 125.728307 91.3639) (xy 125.570193 91.3639) - (xy 125.417466 91.404823) (xy 125.280534 91.48388) (xy 125.16873 91.595684) (xy 125.089673 91.732616) - (xy 125.04875 91.885343) (xy 124.289584 91.885343) (xy 124.423166 91.80822) (xy 124.53497 91.696416) - (xy 124.614027 91.559484) (xy 124.65495 91.406757) (xy 124.65495 91.248643) (xy 124.614027 91.095916) - (xy 124.53497 90.958984) (xy 124.423166 90.84718) (xy 124.286234 90.768123) (xy 124.133507 90.7272) - (xy 123.975393 90.7272) (xy 123.822666 90.768123) (xy 123.685734 90.84718) (xy 123.57393 90.958984) - (xy 123.494873 91.095916) (xy 123.45395 91.248643) (xy 118.256242 91.248643) (xy 118.256034 91.248523) - (xy 118.103307 91.2076) (xy 117.945193 91.2076) (xy 117.792466 91.248523) (xy 117.655534 91.32758) - (xy 117.54373 91.439384) (xy 117.464673 91.576316) (xy 117.42375 91.729043) (xy 113.544991 91.729043) - (xy 113.616327 91.605484) (xy 113.65725 91.452757) (xy 113.65725 91.294643) (xy 113.616327 91.141916) - (xy 113.53727 91.004984) (xy 113.425466 90.89318) (xy 113.288534 90.814123) (xy 113.135807 90.7732) - (xy 112.977693 90.7732) (xy 112.824966 90.814123) (xy 112.688034 90.89318) (xy 112.57623 91.004984) - (xy 112.497173 91.141916) (xy 112.45625 91.294643) (xy 80.81294 91.294643) (xy 80.812934 91.288254) - (xy 80.810979 89.354104) (xy 118.68115 89.354104) (xy 118.68115 89.492095) (xy 118.70807 89.627427) - (xy 118.70807 89.627429) (xy 118.760872 89.754906) (xy 118.760878 89.754917) (xy 118.837535 89.869641) - (xy 118.935108 89.967214) (xy 119.049832 90.043871) (xy 119.049843 90.043877) (xy 119.096933 90.063382) - (xy 119.177322 90.09668) (xy 119.312657 90.1236) (xy 119.312658 90.1236) (xy 119.450642 90.1236) - (xy 119.450643 90.1236) (xy 119.585978 90.09668) (xy 119.713461 90.043875) (xy 119.828192 89.967214) - (xy 119.925764 89.869642) (xy 120.002425 89.754911) (xy 120.05523 89.627428) (xy 120.08215 89.492093) - (xy 120.08215 89.354107) (xy 120.05523 89.218772) (xy 120.036105 89.1726) (xy 120.028444 89.154104) - (xy 126.12115 89.154104) (xy 126.12115 89.292095) (xy 126.14807 89.427427) (xy 126.14807 89.427429) - (xy 126.200872 89.554906) (xy 126.200878 89.554917) (xy 126.277535 89.669641) (xy 126.375108 89.767214) - (xy 126.489832 89.843871) (xy 126.489843 89.843877) (xy 126.536933 89.863382) (xy 126.617322 89.89668) - (xy 126.752657 89.9236) (xy 126.752658 89.9236) (xy 126.890642 89.9236) (xy 126.890643 89.9236) - (xy 127.025978 89.89668) (xy 127.153461 89.843875) (xy 127.268192 89.767214) (xy 127.365764 89.669642) - (xy 127.442425 89.554911) (xy 127.49523 89.427428) (xy 127.52215 89.292093) (xy 127.52215 89.154107) - (xy 127.49523 89.018772) (xy 127.451188 88.912444) (xy 127.451188 88.912443) (xy 136.72295 88.912443) - (xy 136.72295 89.070557) (xy 136.763873 89.223284) (xy 136.84293 89.360216) (xy 136.954734 89.47202) - (xy 137.091666 89.551077) (xy 137.244393 89.592) (xy 137.244395 89.592) (xy 137.402505 89.592) (xy 137.402507 89.592) - (xy 137.555234 89.551077) (xy 137.692166 89.47202) (xy 137.80397 89.360216) (xy 137.883027 89.223284) - (xy 137.92395 89.070557) (xy 137.92395 88.912443) (xy 137.883027 88.759716) (xy 137.80397 88.622784) - (xy 137.692166 88.51098) (xy 137.555234 88.431923) (xy 137.402507 88.391) (xy 137.244393 88.391) - (xy 137.091666 88.431923) (xy 136.954734 88.51098) (xy 136.84293 88.622784) (xy 136.763873 88.759716) - (xy 136.72295 88.912443) (xy 127.451188 88.912443) (xy 127.442427 88.891293) (xy 127.442421 88.891282) - (xy 127.365764 88.776558) (xy 127.268191 88.678985) (xy 127.153467 88.602328) (xy 127.153456 88.602322) - (xy 127.025978 88.54952) (xy 126.890645 88.5226) (xy 126.890643 88.5226) (xy 126.752657 88.5226) - (xy 126.752654 88.5226) (xy 126.617322 88.54952) (xy 126.61732 88.54952) (xy 126.489843 88.602322) - (xy 126.489832 88.602328) (xy 126.375108 88.678985) (xy 126.277535 88.776558) (xy 126.200878 88.891282) - (xy 126.200872 88.891293) (xy 126.14807 89.01877) (xy 126.14807 89.018772) (xy 126.12115 89.154104) - (xy 120.028444 89.154104) (xy 120.002427 89.091293) (xy 120.002421 89.091282) (xy 119.925764 88.976558) - (xy 119.828191 88.878985) (xy 119.713467 88.802328) (xy 119.713456 88.802322) (xy 119.585978 88.74952) - (xy 119.450645 88.7226) (xy 119.450643 88.7226) (xy 119.312657 88.7226) (xy 119.312654 88.7226) - (xy 119.177322 88.74952) (xy 119.17732 88.74952) (xy 119.049843 88.802322) (xy 119.049832 88.802328) - (xy 118.935108 88.878985) (xy 118.837535 88.976558) (xy 118.760878 89.091282) (xy 118.760872 89.091293) - (xy 118.70807 89.21877) (xy 118.70807 89.218772) (xy 118.68115 89.354104) (xy 80.810979 89.354104) - (xy 80.810974 89.349343) (xy 80.805893 84.322543) (xy 93.54865 84.322543) (xy 93.54865 84.480657) - (xy 93.589573 84.633384) (xy 93.66863 84.770316) (xy 93.780434 84.88212) (xy 93.917366 84.961177) - (xy 94.070093 85.0021) (xy 94.070095 85.0021) (xy 94.228205 85.0021) (xy 94.228207 85.0021) (xy 94.380934 84.961177) - (xy 94.517866 84.88212) (xy 94.62967 84.770316) (xy 94.708727 84.633384) (xy 94.74965 84.480657) - (xy 94.74965 84.322543) (xy 94.729983 84.249143) (xy 99.76065 84.249143) (xy 99.76065 84.407257) - (xy 99.801573 84.559984) (xy 99.88063 84.696916) (xy 99.992434 84.80872) (xy 100.129366 84.887777) - (xy 100.282093 84.9287) (xy 100.282095 84.9287) (xy 100.440205 84.9287) (xy 100.440207 84.9287) - (xy 100.592934 84.887777) (xy 100.729866 84.80872) (xy 100.84167 84.696916) (xy 100.920727 84.559984) - (xy 100.96165 84.407257) (xy 100.96165 84.249143) (xy 100.933328 84.143443) (xy 102.72725 84.143443) - (xy 102.72725 84.301557) (xy 102.768173 84.454284) (xy 102.84723 84.591216) (xy 102.959034 84.70302) - (xy 103.095966 84.782077) (xy 103.248693 84.823) (xy 103.248695 84.823) (xy 103.406805 84.823) (xy 103.406807 84.823) - (xy 103.559534 84.782077) (xy 103.696466 84.70302) (xy 103.80827 84.591216) (xy 103.887327 84.454284) - (xy 103.92825 84.301557) (xy 103.92825 84.143443) (xy 103.887327 83.990716) (xy 103.80827 83.853784) - (xy 103.696466 83.74198) (xy 103.559534 83.662923) (xy 103.406807 83.622) (xy 103.248693 83.622) - (xy 103.095966 83.662923) (xy 102.959034 83.74198) (xy 102.84723 83.853784) (xy 102.768173 83.990716) - (xy 102.72725 84.143443) (xy 100.933328 84.143443) (xy 100.920727 84.096416) (xy 100.84167 83.959484) - (xy 100.729866 83.84768) (xy 100.592934 83.768623) (xy 100.440207 83.7277) (xy 100.282093 83.7277) - (xy 100.129366 83.768623) (xy 99.992434 83.84768) (xy 99.88063 83.959484) (xy 99.801573 84.096416) - (xy 99.76065 84.249143) (xy 94.729983 84.249143) (xy 94.708727 84.169816) (xy 94.62967 84.032884) - (xy 94.517866 83.92108) (xy 94.380934 83.842023) (xy 94.228207 83.8011) (xy 94.070093 83.8011) (xy 93.917366 83.842023) - (xy 93.780434 83.92108) (xy 93.66863 84.032884) (xy 93.589573 84.169816) (xy 93.54865 84.322543) - (xy 80.805893 84.322543) (xy 80.805887 84.316154) (xy 80.805025 83.463643) (xy 130.71885 83.463643) - (xy 130.71885 83.621757) (xy 130.759773 83.774484) (xy 130.83883 83.911416) (xy 130.950634 84.02322) - (xy 131.087566 84.102277) (xy 131.240293 84.1432) (xy 131.240295 84.1432) (xy 131.398405 84.1432) - (xy 131.398407 84.1432) (xy 131.551134 84.102277) (xy 131.688066 84.02322) (xy 131.79987 83.911416) - (xy 131.878927 83.774484) (xy 131.91985 83.621757) (xy 131.91985 83.463643) (xy 131.878927 83.310916) - (xy 131.79987 83.173984) (xy 131.688066 83.06218) (xy 131.551134 82.983123) (xy 131.398407 82.9422) - (xy 131.240293 82.9422) (xy 131.087566 82.983123) (xy 130.950634 83.06218) (xy 130.83883 83.173984) - (xy 130.759773 83.310916) (xy 130.71885 83.463643) (xy 80.805025 83.463643) (xy 80.804277 82.724043) - (xy 97.25115 82.724043) (xy 97.25115 82.882157) (xy 97.292073 83.034884) (xy 97.37113 83.171816) - (xy 97.482934 83.28362) (xy 97.619866 83.362677) (xy 97.772593 83.4036) (xy 97.772595 83.4036) (xy 97.930705 83.4036) - (xy 97.930707 83.4036) (xy 98.083434 83.362677) (xy 98.220366 83.28362) (xy 98.33217 83.171816) - (xy 98.411227 83.034884) (xy 98.45215 82.882157) (xy 98.45215 82.724043) (xy 98.411227 82.571316) - (xy 98.33217 82.434384) (xy 98.220366 82.32258) (xy 98.083434 82.243523) (xy 97.930707 82.2026) - (xy 97.772593 82.2026) (xy 97.619866 82.243523) (xy 97.482934 82.32258) (xy 97.37113 82.434384) - (xy 97.292073 82.571316) (xy 97.25115 82.724043) (xy 80.804277 82.724043) (xy 80.804271 82.717654) - (xy 80.802174 80.643743) (xy 102.27555 80.643743) (xy 102.27555 80.801857) (xy 102.316473 80.954584) - (xy 102.39553 81.091516) (xy 102.507334 81.20332) (xy 102.644266 81.282377) (xy 102.796993 81.3233) - (xy 102.796995 81.3233) (xy 102.955105 81.3233) (xy 102.955107 81.3233) (xy 103.107834 81.282377) - (xy 103.187322 81.236485) (xy 105.01115 81.236485) (xy 105.01115 81.409714) (xy 105.038247 81.580802) - (xy 105.038248 81.580806) (xy 105.091773 81.745538) (xy 105.091775 81.745541) (xy 105.164052 81.887395) - (xy 105.170418 81.899888) (xy 105.272236 82.040028) (xy 105.394722 82.162514) (xy 105.534862 82.264332) - (xy 105.689205 82.342973) (xy 105.689207 82.342973) (xy 105.689208 82.342974) (xy 105.689211 82.342976) - (xy 105.853943 82.396501) (xy 105.853947 82.396502) (xy 106.025036 82.4236) (xy 106.025039 82.4236) - (xy 106.198264 82.4236) (xy 106.369352 82.396502) (xy 106.369356 82.396501) (xy 106.534088 82.342976) - (xy 106.53409 82.342974) (xy 106.534095 82.342973) (xy 106.688438 82.264332) (xy 106.828578 82.162514) - (xy 106.89983 82.091261) (xy 106.954344 82.063485) (xy 107.014776 82.073056) (xy 107.058041 82.11632) - (xy 107.067613 82.176752) (xy 107.065459 82.186887) (xy 107.05395 82.22984) (xy 107.05395 82.229843) - (xy 107.05395 82.387957) (xy 107.094873 82.540684) (xy 107.17393 82.677616) (xy 107.285734 82.78942) - (xy 107.422666 82.868477) (xy 107.575393 82.9094) (xy 107.575395 82.9094) (xy 107.733505 82.9094) - (xy 107.733507 82.9094) (xy 107.886234 82.868477) (xy 108.023166 82.78942) (xy 108.13497 82.677616) - (xy 108.214027 82.540684) (xy 108.236975 82.455038) (xy 108.270298 82.403726) (xy 108.327419 82.381799) - (xy 108.363192 82.386508) (xy 108.393949 82.396502) (xy 108.43956 82.403726) (xy 108.565036 82.4236) - (xy 108.565039 82.4236) (xy 108.738264 82.4236) (xy 108.909352 82.396502) (xy 108.909356 82.396501) - (xy 109.074088 82.342976) (xy 109.07409 82.342974) (xy 109.074095 82.342973) (xy 109.228438 82.264332) - (xy 109.368578 82.162514) (xy 109.491064 82.040028) (xy 109.592882 81.899888) (xy 109.671523 81.745545) - (xy 109.671524 81.74554) (xy 109.671526 81.745538) (xy 109.725051 81.580806) (xy 109.725052 81.580802) - (xy 109.75215 81.409714) (xy 109.75215 81.236485) (xy 110.09115 81.236485) (xy 110.09115 81.409714) - (xy 110.118247 81.580802) (xy 110.118248 81.580806) (xy 110.171773 81.745538) (xy 110.171775 81.745541) - (xy 110.244052 81.887395) (xy 110.250418 81.899888) (xy 110.352236 82.040028) (xy 110.474722 82.162514) - (xy 110.614862 82.264332) (xy 110.769205 82.342973) (xy 110.769207 82.342973) (xy 110.769208 82.342974) - (xy 110.769211 82.342976) (xy 110.933943 82.396501) (xy 110.933947 82.396502) (xy 111.105036 82.4236) - (xy 111.105039 82.4236) (xy 111.278264 82.4236) (xy 111.449352 82.396502) (xy 111.449356 82.396501) - (xy 111.614088 82.342976) (xy 111.61409 82.342974) (xy 111.614095 82.342973) (xy 111.768438 82.264332) - (xy 111.908578 82.162514) (xy 112.031064 82.040028) (xy 112.132882 81.899888) (xy 112.211523 81.745545) - (xy 112.265052 81.580801) (xy 112.265052 81.580798) (xy 112.266171 81.577356) (xy 112.302135 81.527856) - (xy 112.360326 81.508949) (xy 112.418517 81.527856) (xy 112.454481 81.577356) (xy 112.458107 81.592461) - (xy 112.463659 81.627513) (xy 112.526893 81.822127) (xy 112.619788 82.004446) (xy 112.740064 82.169991) + (xy 126.683659 129.278685) (xy 126.67504 129.333099) (xy 126.331043 129.333099) (xy 126.325623 129.305849) + (xy 126.253972 129.132869) (xy 126.25397 129.132867) (xy 126.253968 129.132861) (xy 126.18156 129.024497) + (xy 126.149952 128.977192) (xy 126.017558 128.844798) (xy 125.973209 128.815165) (xy 125.861888 128.740781) + (xy 125.861879 128.740777) (xy 125.688899 128.669126) (xy 125.505268 128.6326) (xy 125.505266 128.6326) + (xy 125.318034 128.6326) (xy 125.318031 128.6326) (xy 125.1344 128.669126) (xy 124.96142 128.740777) + (xy 124.961411 128.740781) (xy 124.805742 128.844798) (xy 124.805738 128.844801) (xy 124.673351 128.977188) + (xy 124.673348 128.977192) (xy 124.569331 129.132861) (xy 124.569327 129.13287) (xy 124.497676 129.30585) + (xy 124.46115 129.489481) (xy 123.822149 129.489481) (xy 123.785623 129.305849) (xy 123.713972 129.132869) + (xy 123.71397 129.132867) (xy 123.713968 129.132861) (xy 123.64156 129.024497) (xy 123.609952 128.977192) + (xy 123.477558 128.844798) (xy 123.433209 128.815165) (xy 123.321888 128.740781) (xy 123.321879 128.740777) + (xy 123.148899 128.669126) (xy 122.965268 128.6326) (xy 122.965266 128.6326) (xy 122.778034 128.6326) + (xy 122.778031 128.6326) (xy 122.5944 128.669126) (xy 122.42142 128.740777) (xy 122.421411 128.740781) + (xy 122.265742 128.844798) (xy 122.265738 128.844801) (xy 122.133351 128.977188) (xy 122.133348 128.977192) + (xy 122.029331 129.132861) (xy 122.029327 129.13287) (xy 121.957676 129.30585) (xy 121.92115 129.489481) + (xy 121.282149 129.489481) (xy 121.245623 129.305849) (xy 121.173972 129.132869) (xy 121.17397 129.132867) + (xy 121.173968 129.132861) (xy 121.10156 129.024497) (xy 121.069952 128.977192) (xy 120.937558 128.844798) + (xy 120.893209 128.815165) (xy 120.781888 128.740781) (xy 120.781879 128.740777) (xy 120.608899 128.669126) + (xy 120.425268 128.6326) (xy 120.425266 128.6326) (xy 120.238034 128.6326) (xy 120.238031 128.6326) + (xy 120.0544 128.669126) (xy 119.88142 128.740777) (xy 119.881411 128.740781) (xy 119.725742 128.844798) + (xy 119.725738 128.844801) (xy 119.593351 128.977188) (xy 119.593348 128.977192) (xy 119.489331 129.132861) + (xy 119.489327 129.13287) (xy 119.417676 129.30585) (xy 119.38115 129.489481) (xy 118.742149 129.489481) + (xy 118.705623 129.305849) (xy 118.633972 129.132869) (xy 118.63397 129.132867) (xy 118.633968 129.132861) + (xy 118.56156 129.024497) (xy 118.529952 128.977192) (xy 118.397558 128.844798) (xy 118.353209 128.815165) + (xy 118.241888 128.740781) (xy 118.241879 128.740777) (xy 118.068899 128.669126) (xy 117.885268 128.6326) + (xy 117.885266 128.6326) (xy 117.698034 128.6326) (xy 117.698031 128.6326) (xy 117.5144 128.669126) + (xy 117.34142 128.740777) (xy 117.341411 128.740781) (xy 117.185742 128.844798) (xy 117.185738 128.844801) + (xy 117.053351 128.977188) (xy 117.053348 128.977192) (xy 116.949331 129.132861) (xy 116.949327 129.13287) + (xy 116.877676 129.30585) (xy 116.84115 129.489481) (xy 116.20215 129.489481) (xy 116.20215 128.76828) + (xy 116.202149 128.768278) (xy 116.202149 128.768272) (xy 116.193417 128.724379) (xy 116.193415 128.724375) + (xy 116.160155 128.674598) (xy 116.160154 128.674596) (xy 116.140774 128.661647) (xy 116.110374 128.641334) + (xy 116.11037 128.641332) (xy 116.066477 128.6326) (xy 116.06647 128.6326) (xy 114.43683 128.6326) + (xy 114.436822 128.6326) (xy 114.392929 128.641332) (xy 114.392925 128.641334) (xy 114.343148 128.674594) + (xy 114.343144 128.674598) (xy 114.309884 128.724375) (xy 114.309882 128.724379) (xy 114.30115 128.768272) + (xy 80.850819 128.768272) (xy 80.836932 115.030291) (xy 100.61975 115.030291) (xy 100.61975 115.148909) + (xy 100.634137 115.2026) (xy 100.650452 115.26349) (xy 100.709757 115.366208) (xy 100.709759 115.36621) + (xy 100.709761 115.366213) (xy 100.793637 115.450089) (xy 100.793639 115.45009) (xy 100.793641 115.450092) + (xy 100.89636 115.509397) (xy 100.896361 115.509397) (xy 100.896364 115.509399) (xy 101.010941 115.5401) + (xy 101.010943 115.5401) (xy 101.129557 115.5401) (xy 101.129559 115.5401) (xy 101.244136 115.509399) + (xy 101.244138 115.509397) (xy 101.24414 115.509397) (xy 101.346858 115.450092) (xy 101.346858 115.450091) + (xy 101.346863 115.450089) (xy 101.430739 115.366213) (xy 101.490049 115.263486) (xy 101.52075 115.148909) + (xy 101.52075 115.030291) (xy 101.490049 114.915714) (xy 101.490047 114.915711) (xy 101.490047 114.915709) + (xy 101.430742 114.812991) (xy 101.43074 114.812989) (xy 101.430739 114.812987) (xy 101.346863 114.729111) + (xy 101.34686 114.729109) (xy 101.346858 114.729107) (xy 101.244139 114.669802) (xy 101.24414 114.669802) + (xy 101.230601 114.666174) (xy 101.129559 114.6391) (xy 101.010941 114.6391) (xy 100.940817 114.657889) + (xy 100.896359 114.669802) (xy 100.793641 114.729107) (xy 100.709757 114.812991) (xy 100.650452 114.915709) + (xy 100.633287 114.979769) (xy 100.61975 115.030291) (xy 80.836932 115.030291) (xy 80.834929 113.049091) + (xy 110.51885 113.049091) (xy 110.51885 113.167709) (xy 110.527688 113.200691) (xy 110.549552 113.28229) + (xy 110.608857 113.385008) (xy 110.608859 113.38501) (xy 110.608861 113.385013) (xy 110.692737 113.468889) + (xy 110.692739 113.46889) (xy 110.692741 113.468892) (xy 110.79546 113.528197) (xy 110.795461 113.528197) + (xy 110.795464 113.528199) (xy 110.910041 113.5589) (xy 110.910043 113.5589) (xy 111.028657 113.5589) + (xy 111.028659 113.5589) (xy 111.143236 113.528199) (xy 111.143238 113.528197) (xy 111.14324 113.528197) + (xy 111.245958 113.468892) (xy 111.245958 113.468891) (xy 111.245963 113.468889) (xy 111.329839 113.385013) + (xy 111.384874 113.289691) (xy 126.18365 113.289691) (xy 126.18365 113.408309) (xy 126.199883 113.468892) + (xy 126.214352 113.52289) (xy 126.273657 113.625608) (xy 126.273659 113.62561) (xy 126.273661 113.625613) + (xy 126.357537 113.709489) (xy 126.357539 113.70949) (xy 126.357541 113.709492) (xy 126.46026 113.768797) + (xy 126.460261 113.768797) (xy 126.460264 113.768799) (xy 126.574841 113.7995) (xy 126.574843 113.7995) + (xy 126.693457 113.7995) (xy 126.693459 113.7995) (xy 126.808036 113.768799) (xy 126.808038 113.768797) + (xy 126.80804 113.768797) (xy 126.910758 113.709492) (xy 126.910758 113.709491) (xy 126.910763 113.709489) + (xy 126.994639 113.625613) (xy 127.023218 113.576114) (xy 127.053947 113.52289) (xy 127.053947 113.522888) + (xy 127.053949 113.522886) (xy 127.08465 113.408309) (xy 127.08465 113.289691) (xy 127.053949 113.175114) + (xy 127.053947 113.175111) (xy 127.053947 113.175109) (xy 126.994642 113.072391) (xy 126.99464 113.072389) + (xy 126.994639 113.072387) (xy 126.910763 112.988511) (xy 126.91076 112.988509) (xy 126.910758 112.988507) + (xy 126.808039 112.929202) (xy 126.80804 112.929202) (xy 126.794501 112.925574) (xy 126.693459 112.8985) + (xy 126.574841 112.8985) (xy 126.504717 112.917289) (xy 126.460259 112.929202) (xy 126.357541 112.988507) + (xy 126.273657 113.072391) (xy 126.214352 113.175109) (xy 126.197187 113.239169) (xy 126.18365 113.289691) + (xy 111.384874 113.289691) (xy 111.389149 113.282286) (xy 111.41985 113.167709) (xy 111.41985 113.049091) + (xy 111.389149 112.934514) (xy 111.389147 112.934511) (xy 111.389147 112.934509) (xy 111.329842 112.831791) + (xy 111.32984 112.831789) (xy 111.329839 112.831787) (xy 111.245963 112.747911) (xy 111.24596 112.747909) + (xy 111.245958 112.747907) (xy 111.143239 112.688602) (xy 111.14324 112.688602) (xy 111.111573 112.680117) + (xy 111.028659 112.6579) (xy 110.910041 112.6579) (xy 110.839917 112.676689) (xy 110.795459 112.688602) + (xy 110.692741 112.747907) (xy 110.608857 112.831791) (xy 110.549552 112.934509) (xy 110.535082 112.988511) + (xy 110.51885 113.049091) (xy 80.834929 113.049091) (xy 80.833387 111.523491) (xy 106.38145 111.523491) + (xy 106.38145 111.642109) (xy 106.400442 111.712986) (xy 106.412152 111.75669) (xy 106.471457 111.859408) + (xy 106.471459 111.85941) (xy 106.471461 111.859413) (xy 106.555337 111.943289) (xy 106.555339 111.94329) + (xy 106.555341 111.943292) (xy 106.65806 112.002597) (xy 106.658061 112.002597) (xy 106.658064 112.002599) + (xy 106.772641 112.0333) (xy 106.772643 112.0333) (xy 106.891257 112.0333) (xy 106.891259 112.0333) + (xy 107.005836 112.002599) (xy 107.005838 112.002597) (xy 107.00584 112.002597) (xy 107.108558 111.943292) + (xy 107.108558 111.943291) (xy 107.108563 111.943289) (xy 107.192439 111.859413) (xy 107.192442 111.859408) + (xy 107.251747 111.75669) (xy 107.251747 111.756688) (xy 107.251749 111.756686) (xy 107.28245 111.642109) + (xy 107.28245 111.523491) (xy 107.270741 111.479791) (xy 110.32675 111.479791) (xy 110.32675 111.598409) + (xy 110.348261 111.678689) (xy 110.357452 111.71299) (xy 110.416757 111.815708) (xy 110.416759 111.81571) + (xy 110.416761 111.815713) (xy 110.500637 111.899589) (xy 110.500639 111.89959) (xy 110.500641 111.899592) + (xy 110.60336 111.958897) (xy 110.603361 111.958897) (xy 110.603364 111.958899) (xy 110.717941 111.9896) + (xy 110.717943 111.9896) (xy 110.836557 111.9896) (xy 110.836559 111.9896) (xy 110.951136 111.958899) + (xy 110.951138 111.958897) (xy 110.95114 111.958897) (xy 111.053858 111.899592) (xy 111.053858 111.899591) + (xy 111.053863 111.899589) (xy 111.137739 111.815713) (xy 111.161759 111.774109) (xy 111.197047 111.71299) + (xy 111.197047 111.712988) (xy 111.197049 111.712986) (xy 111.212455 111.655491) (xy 126.16455 111.655491) + (xy 126.16455 111.774109) (xy 126.175698 111.815713) (xy 126.195252 111.88869) (xy 126.254557 111.991408) + (xy 126.254559 111.99141) (xy 126.254561 111.991413) (xy 126.338437 112.075289) (xy 126.338439 112.07529) + (xy 126.338441 112.075292) (xy 126.44116 112.134597) (xy 126.441161 112.134597) (xy 126.441164 112.134599) + (xy 126.555741 112.1653) (xy 126.555743 112.1653) (xy 126.674357 112.1653) (xy 126.674359 112.1653) + (xy 126.788936 112.134599) (xy 126.788938 112.134597) (xy 126.78894 112.134597) (xy 126.891658 112.075292) + (xy 126.891658 112.075291) (xy 126.891663 112.075289) (xy 126.975539 111.991413) (xy 127.003324 111.943289) + (xy 127.034847 111.88869) (xy 127.034847 111.888688) (xy 127.034849 111.888686) (xy 127.06555 111.774109) + (xy 127.06555 111.655491) (xy 127.034849 111.540914) (xy 127.034847 111.540911) (xy 127.034847 111.540909) + (xy 126.975542 111.438191) (xy 126.97554 111.438189) (xy 126.975539 111.438187) (xy 126.891663 111.354311) + (xy 126.89166 111.354309) (xy 126.891658 111.354307) (xy 126.863652 111.338138) (xy 126.788939 111.295002) + (xy 126.78894 111.295002) (xy 126.775401 111.291374) (xy 126.674359 111.2643) (xy 126.555741 111.2643) + (xy 126.485617 111.283089) (xy 126.441159 111.295002) (xy 126.338441 111.354307) (xy 126.254557 111.438191) + (xy 126.195252 111.540909) (xy 126.195251 111.540914) (xy 126.16455 111.655491) (xy 111.212455 111.655491) + (xy 111.22775 111.598409) (xy 111.22775 111.479791) (xy 111.197049 111.365214) (xy 111.197047 111.365211) + (xy 111.197047 111.365209) (xy 111.137742 111.262491) (xy 111.13774 111.262489) (xy 111.137739 111.262487) + (xy 111.134143 111.258891) (xy 131.69115 111.258891) (xy 131.69115 111.377509) (xy 131.699564 111.408909) + (xy 131.721852 111.49209) (xy 131.781157 111.594808) (xy 131.781159 111.59481) (xy 131.781161 111.594813) + (xy 131.865037 111.678689) (xy 131.865039 111.67869) (xy 131.865041 111.678692) (xy 131.96776 111.737997) + (xy 131.967761 111.737997) (xy 131.967764 111.737999) (xy 132.082341 111.7687) (xy 132.082343 111.7687) + (xy 132.200957 111.7687) (xy 132.200959 111.7687) (xy 132.315536 111.737999) (xy 132.315538 111.737997) + (xy 132.31554 111.737997) (xy 132.418258 111.678692) (xy 132.418258 111.678691) (xy 132.418263 111.678689) + (xy 132.502139 111.594813) (xy 132.543317 111.523491) (xy 132.561447 111.49209) (xy 132.561447 111.492088) + (xy 132.561449 111.492086) (xy 132.59215 111.377509) (xy 132.59215 111.258891) (xy 132.561449 111.144314) + (xy 132.561447 111.144311) (xy 132.561447 111.144309) (xy 132.502142 111.041591) (xy 132.50214 111.041589) + (xy 132.502139 111.041587) (xy 132.418263 110.957711) (xy 132.41826 110.957709) (xy 132.418258 110.957707) + (xy 132.315539 110.898402) (xy 132.31554 110.898402) (xy 132.302001 110.894774) (xy 132.200959 110.8677) + (xy 132.082341 110.8677) (xy 132.012217 110.886489) (xy 131.967759 110.898402) (xy 131.865041 110.957707) + (xy 131.781157 111.041591) (xy 131.721852 111.144309) (xy 131.712662 111.178607) (xy 131.69115 111.258891) + (xy 111.134143 111.258891) (xy 111.053863 111.178611) (xy 111.05386 111.178609) (xy 111.053858 111.178607) + (xy 110.951139 111.119302) (xy 110.95114 111.119302) (xy 110.937601 111.115674) (xy 110.836559 111.0886) + (xy 110.717941 111.0886) (xy 110.647817 111.107389) (xy 110.603359 111.119302) (xy 110.500641 111.178607) + (xy 110.416757 111.262491) (xy 110.357452 111.365209) (xy 110.340287 111.429269) (xy 110.32675 111.479791) + (xy 107.270741 111.479791) (xy 107.251749 111.408914) (xy 107.251747 111.408911) (xy 107.251747 111.408909) + (xy 107.192442 111.306191) (xy 107.19244 111.306189) (xy 107.192439 111.306187) (xy 107.108563 111.222311) + (xy 107.10856 111.222309) (xy 107.108558 111.222307) (xy 107.005839 111.163002) (xy 107.00584 111.163002) + (xy 106.992301 111.159374) (xy 106.891259 111.1323) (xy 106.772641 111.1323) (xy 106.702517 111.151089) + (xy 106.658059 111.163002) (xy 106.555341 111.222307) (xy 106.471457 111.306191) (xy 106.412152 111.408909) + (xy 106.412151 111.408914) (xy 106.38145 111.523491) (xy 80.833387 111.523491) (xy 80.830858 109.021091) + (xy 91.64615 109.021091) (xy 91.64615 109.139709) (xy 91.655622 109.175059) (xy 91.676852 109.25429) + (xy 91.736157 109.357008) (xy 91.736159 109.35701) (xy 91.736161 109.357013) (xy 91.820037 109.440889) + (xy 91.820039 109.44089) (xy 91.820041 109.440892) (xy 91.92276 109.500197) (xy 91.922761 109.500197) + (xy 91.922764 109.500199) (xy 92.037341 109.5309) (xy 92.037343 109.5309) (xy 92.155957 109.5309) + (xy 92.155959 109.5309) (xy 92.175772 109.525591) (xy 92.90375 109.525591) (xy 92.90375 109.644209) + (xy 92.911248 109.67219) (xy 92.934452 109.75879) (xy 92.993757 109.861508) (xy 92.993759 109.86151) + (xy 92.993761 109.861513) (xy 93.077637 109.945389) (xy 93.077639 109.94539) (xy 93.077641 109.945392) + (xy 93.18036 110.004697) (xy 93.180361 110.004697) (xy 93.180364 110.004699) (xy 93.294941 110.0354) + (xy 93.294943 110.0354) (xy 93.413557 110.0354) (xy 93.413559 110.0354) (xy 93.528136 110.004699) + (xy 93.528138 110.004697) (xy 93.52814 110.004697) (xy 93.630858 109.945392) (xy 93.630858 109.945391) + (xy 93.630863 109.945389) (xy 93.714739 109.861513) (xy 93.727742 109.838992) (xy 93.774047 109.75879) + (xy 93.774047 109.758788) (xy 93.774049 109.758786) (xy 93.80475 109.644209) (xy 93.80475 109.525591) + (xy 93.781367 109.438324) (xy 93.781367 109.438323) (xy 93.77624 109.419191) (xy 116.38115 109.419191) + (xy 116.38115 109.537809) (xy 116.408224 109.638851) (xy 116.411852 109.65239) (xy 116.471157 109.755108) + (xy 116.471159 109.75511) (xy 116.471161 109.755113) (xy 116.555037 109.838989) (xy 116.555039 109.83899) + (xy 116.555041 109.838992) (xy 116.65776 109.898297) (xy 116.657761 109.898297) (xy 116.657764 109.898299) + (xy 116.772341 109.929) (xy 116.772343 109.929) (xy 116.890957 109.929) (xy 116.890959 109.929) + (xy 117.005536 109.898299) (xy 117.005538 109.898297) (xy 117.00554 109.898297) (xy 117.108258 109.838992) + (xy 117.108258 109.838991) (xy 117.108263 109.838989) (xy 117.192139 109.755113) (xy 117.240015 109.67219) + (xy 117.251447 109.65239) (xy 117.251447 109.652388) (xy 117.251449 109.652386) (xy 117.28215 109.537809) + (xy 117.28215 109.419191) (xy 117.251449 109.304614) (xy 117.251447 109.304611) (xy 117.251447 109.304609) + (xy 117.192142 109.201891) (xy 117.19214 109.201889) (xy 117.192139 109.201887) (xy 117.108263 109.118011) + (xy 117.10826 109.118009) (xy 117.108258 109.118007) (xy 117.005539 109.058702) (xy 117.00554 109.058702) + (xy 116.967107 109.048404) (xy 116.890959 109.028) (xy 116.772341 109.028) (xy 116.702217 109.046789) + (xy 116.657759 109.058702) (xy 116.555041 109.118007) (xy 116.471157 109.201891) (xy 116.411852 109.304609) + (xy 116.397812 109.357008) (xy 116.38115 109.419191) (xy 93.77624 109.419191) (xy 93.774048 109.411012) + (xy 93.774047 109.41101) (xy 93.714742 109.308291) (xy 93.71474 109.308289) (xy 93.714739 109.308287) + (xy 93.630863 109.224411) (xy 93.63086 109.224409) (xy 93.630858 109.224407) (xy 93.528139 109.165102) + (xy 93.52814 109.165102) (xy 93.514473 109.16144) (xy 93.413559 109.1344) (xy 93.294941 109.1344) + (xy 93.224817 109.153189) (xy 93.180359 109.165102) (xy 93.077641 109.224407) (xy 92.993757 109.308291) + (xy 92.934452 109.411009) (xy 92.926954 109.438992) (xy 92.90375 109.525591) (xy 92.175772 109.525591) + (xy 92.270536 109.500199) (xy 92.270538 109.500197) (xy 92.27054 109.500197) (xy 92.373258 109.440892) + (xy 92.373258 109.440891) (xy 92.373263 109.440889) (xy 92.457139 109.357013) (xy 92.476431 109.323599) + (xy 92.516447 109.25429) (xy 92.516447 109.254288) (xy 92.516449 109.254286) (xy 92.54715 109.139709) + (xy 92.54715 109.021091) (xy 92.516449 108.906514) (xy 92.516447 108.906511) (xy 92.516447 108.906509) + (xy 92.457142 108.803791) (xy 92.45714 108.803789) (xy 92.457139 108.803787) (xy 92.373263 108.719911) + (xy 92.37326 108.719909) (xy 92.373258 108.719907) (xy 92.270539 108.660602) (xy 92.27054 108.660602) + (xy 92.257001 108.656974) (xy 92.155959 108.6299) (xy 92.037341 108.6299) (xy 91.967217 108.648689) + (xy 91.922759 108.660602) (xy 91.820041 108.719907) (xy 91.736157 108.803791) (xy 91.676852 108.906509) + (xy 91.672409 108.92309) (xy 91.64615 109.021091) (xy 80.830858 109.021091) (xy 80.830128 108.2987) + (xy 80.829186 107.366791) (xy 99.33935 107.366791) (xy 99.33935 107.485409) (xy 99.354945 107.543609) + (xy 99.370052 107.59999) (xy 99.429357 107.702708) (xy 99.429359 107.70271) (xy 99.429361 107.702713) + (xy 99.513237 107.786589) (xy 99.513239 107.78659) (xy 99.513241 107.786592) (xy 99.61596 107.845897) + (xy 99.615961 107.845897) (xy 99.615964 107.845899) (xy 99.730541 107.8766) (xy 99.730543 107.8766) + (xy 99.849157 107.8766) (xy 99.849159 107.8766) (xy 99.963736 107.845899) (xy 99.963738 107.845897) + (xy 99.96374 107.845897) (xy 100.066458 107.786592) (xy 100.066458 107.786591) (xy 100.066463 107.786589) + (xy 100.150339 107.702713) (xy 100.167779 107.672507) (xy 100.209647 107.59999) (xy 100.209647 107.599988) + (xy 100.209649 107.599986) (xy 100.24035 107.485409) (xy 100.24035 107.366791) (xy 100.209649 107.252214) + (xy 100.209647 107.252211) (xy 100.209647 107.252209) (xy 100.150342 107.149491) (xy 100.15034 107.149489) + (xy 100.150339 107.149487) (xy 100.066463 107.065611) (xy 100.06646 107.065609) (xy 100.066458 107.065607) + (xy 99.963739 107.006302) (xy 99.96374 107.006302) (xy 99.950201 107.002674) (xy 99.849159 106.9756) + (xy 99.730541 106.9756) (xy 99.660417 106.994389) (xy 99.615959 107.006302) (xy 99.513241 107.065607) + (xy 99.429357 107.149491) (xy 99.370052 107.252209) (xy 99.366089 107.267) (xy 99.33935 107.366791) + (xy 80.829186 107.366791) (xy 80.82918 107.360402) (xy 80.828085 106.277391) (xy 105.03045 106.277391) + (xy 105.03045 106.396009) (xy 105.056975 106.495) (xy 105.061152 106.51059) (xy 105.120457 106.613308) + (xy 105.120459 106.61331) (xy 105.120461 106.613313) (xy 105.204337 106.697189) (xy 105.204339 106.69719) + (xy 105.204341 106.697192) (xy 105.30706 106.756497) (xy 105.307061 106.756497) (xy 105.307064 106.756499) + (xy 105.421641 106.7872) (xy 105.421643 106.7872) (xy 105.540257 106.7872) (xy 105.540259 106.7872) + (xy 105.654836 106.756499) (xy 105.654838 106.756497) (xy 105.65484 106.756497) (xy 105.757558 106.697192) + (xy 105.757558 106.697191) (xy 105.757563 106.697189) (xy 105.841439 106.613313) (xy 105.900749 106.510586) + (xy 105.93145 106.396009) (xy 105.93145 106.277391) (xy 105.900749 106.162814) (xy 105.900747 106.162811) + (xy 105.900747 106.162809) (xy 105.841442 106.060091) (xy 105.84144 106.060089) (xy 105.841439 106.060087) + (xy 105.766543 105.985191) (xy 112.74115 105.985191) (xy 112.74115 106.103809) (xy 112.767781 106.203195) + (xy 112.771852 106.21839) (xy 112.831157 106.321108) (xy 112.831159 106.32111) (xy 112.831161 106.321113) + (xy 112.915037 106.404989) (xy 112.915039 106.40499) (xy 112.915041 106.404992) (xy 113.01776 106.464297) + (xy 113.017761 106.464297) (xy 113.017764 106.464299) (xy 113.132341 106.495) (xy 113.132343 106.495) + (xy 113.250957 106.495) (xy 113.250959 106.495) (xy 113.365536 106.464299) (xy 113.365538 106.464297) + (xy 113.36554 106.464297) (xy 113.468258 106.404992) (xy 113.468258 106.404991) (xy 113.468263 106.404989) + (xy 113.552139 106.321113) (xy 113.611449 106.218386) (xy 113.64215 106.103809) (xy 113.64215 105.985191) + (xy 113.611449 105.870614) (xy 113.611447 105.870611) (xy 113.611447 105.870609) (xy 113.552142 105.767891) + (xy 113.55214 105.767889) (xy 113.552139 105.767887) (xy 113.468263 105.684011) (xy 113.46826 105.684009) + (xy 113.468258 105.684007) (xy 113.365539 105.624702) (xy 113.36554 105.624702) (xy 113.352001 105.621074) + (xy 113.250959 105.594) (xy 113.132341 105.594) (xy 113.062217 105.612789) (xy 113.017759 105.624702) + (xy 112.915041 105.684007) (xy 112.831157 105.767891) (xy 112.771852 105.870609) (xy 112.759448 105.916901) + (xy 112.74115 105.985191) (xy 105.766543 105.985191) (xy 105.757563 105.976211) (xy 105.75756 105.976209) + (xy 105.757558 105.976207) (xy 105.654839 105.916902) (xy 105.65484 105.916902) (xy 105.641301 105.913274) + (xy 105.540259 105.8862) (xy 105.421641 105.8862) (xy 105.351517 105.904989) (xy 105.307059 105.916902) + (xy 105.204341 105.976207) (xy 105.120457 106.060091) (xy 105.061152 106.162809) (xy 105.061151 106.162814) + (xy 105.03045 106.277391) (xy 80.828085 106.277391) (xy 80.828079 106.271002) (xy 80.827134 105.336491) + (xy 115.29295 105.336491) (xy 115.29295 105.455109) (xy 115.306848 105.506977) (xy 115.323652 105.56969) + (xy 115.382957 105.672408) (xy 115.382959 105.67241) (xy 115.382961 105.672413) (xy 115.466837 105.756289) + (xy 115.466839 105.75629) (xy 115.466841 105.756292) (xy 115.56956 105.815597) (xy 115.569561 105.815597) + (xy 115.569564 105.815599) (xy 115.684141 105.8463) (xy 115.684143 105.8463) (xy 115.802757 105.8463) + (xy 115.802759 105.8463) (xy 115.917336 105.815599) (xy 115.917338 105.815597) (xy 115.91734 105.815597) + (xy 116.020058 105.756292) (xy 116.020058 105.756291) (xy 116.020063 105.756289) (xy 116.103939 105.672413) + (xy 116.161278 105.5731) (xy 116.163247 105.56969) (xy 116.163247 105.569688) (xy 116.163249 105.569686) + (xy 116.19395 105.455109) (xy 116.19395 105.336491) (xy 116.163249 105.221914) (xy 116.163247 105.221911) + (xy 116.163247 105.221909) (xy 116.103942 105.119191) (xy 116.10394 105.119189) (xy 116.103939 105.119187) + (xy 116.020063 105.035311) (xy 116.02006 105.035309) (xy 116.020058 105.035307) (xy 115.917339 104.976002) + (xy 115.91734 104.976002) (xy 115.903801 104.972374) (xy 115.802759 104.9453) (xy 115.684141 104.9453) + (xy 115.614017 104.964089) (xy 115.569559 104.976002) (xy 115.466841 105.035307) (xy 115.382957 105.119191) + (xy 115.323652 105.221909) (xy 115.323651 105.221914) (xy 115.29295 105.336491) (xy 80.827134 105.336491) + (xy 80.827128 105.330102) (xy 80.825783 104.000191) (xy 90.64625 104.000191) (xy 90.64625 104.118809) + (xy 90.670613 104.209732) (xy 90.676952 104.23339) (xy 90.736257 104.336108) (xy 90.736259 104.33611) + (xy 90.736261 104.336113) (xy 90.820137 104.419989) (xy 90.820139 104.41999) (xy 90.820141 104.419992) + (xy 90.92286 104.479297) (xy 90.922861 104.479297) (xy 90.922864 104.479299) (xy 91.037441 104.51) + (xy 91.037443 104.51) (xy 91.156057 104.51) (xy 91.156059 104.51) (xy 91.270636 104.479299) (xy 91.270638 104.479297) + (xy 91.27064 104.479297) (xy 91.373358 104.419992) (xy 91.373358 104.419991) (xy 91.373363 104.419989) + (xy 91.457239 104.336113) (xy 91.461986 104.327891) (xy 91.516547 104.23339) (xy 91.516547 104.233388) + (xy 91.516549 104.233386) (xy 91.54725 104.118809) (xy 91.54725 104.000191) (xy 91.516549 103.885614) + (xy 91.516547 103.885611) (xy 91.516547 103.885609) (xy 91.457242 103.782891) (xy 91.45724 103.782889) + (xy 91.457239 103.782887) (xy 91.373363 103.699011) (xy 91.37336 103.699009) (xy 91.373358 103.699007) + (xy 91.270639 103.639702) (xy 91.27064 103.639702) (xy 91.257101 103.636074) (xy 91.156059 103.609) + (xy 91.037441 103.609) (xy 90.979274 103.624586) (xy 90.922859 103.639702) (xy 90.820141 103.699007) + (xy 90.736257 103.782891) (xy 90.676952 103.885609) (xy 90.660639 103.946489) (xy 90.64625 104.000191) + (xy 80.825783 104.000191) (xy 80.825777 103.993802) (xy 80.825168 103.391391) (xy 99.02295 103.391391) + (xy 99.02295 103.510009) (xy 99.044089 103.5889) (xy 99.053652 103.62459) (xy 99.112957 103.727308) + (xy 99.112959 103.72731) (xy 99.112961 103.727313) (xy 99.196837 103.811189) (xy 99.196839 103.81119) + (xy 99.196841 103.811192) (xy 99.29956 103.870497) (xy 99.299561 103.870497) (xy 99.299564 103.870499) + (xy 99.414141 103.9012) (xy 99.414143 103.9012) (xy 99.532757 103.9012) (xy 99.532759 103.9012) + (xy 99.647336 103.870499) (xy 99.647338 103.870497) (xy 99.64734 103.870497) (xy 99.750058 103.811192) + (xy 99.750058 103.811191) (xy 99.750063 103.811189) (xy 99.833939 103.727313) (xy 99.861884 103.678911) + (xy 99.893247 103.62459) (xy 99.893247 103.624588) (xy 99.893249 103.624586) (xy 99.92395 103.510009) + (xy 99.92395 103.391391) (xy 99.893249 103.276814) (xy 99.893247 103.276811) (xy 99.893247 103.276809) + (xy 99.833942 103.174091) (xy 99.83394 103.174089) (xy 99.833939 103.174087) (xy 99.750063 103.090211) + (xy 99.75006 103.090209) (xy 99.750058 103.090207) (xy 99.68733 103.053991) (xy 113.45135 103.053991) + (xy 113.45135 103.172609) (xy 113.465524 103.225507) (xy 113.482052 103.28719) (xy 113.541357 103.389908) + (xy 113.541359 103.38991) (xy 113.541361 103.389913) (xy 113.625237 103.473789) (xy 113.625239 103.47379) + (xy 113.625241 103.473792) (xy 113.72796 103.533097) (xy 113.727961 103.533097) (xy 113.727964 103.533099) + (xy 113.842541 103.5638) (xy 113.842543 103.5638) (xy 113.961157 103.5638) (xy 113.961159 103.5638) + (xy 114.075736 103.533099) (xy 114.075738 103.533097) (xy 114.07574 103.533097) (xy 114.086835 103.526691) + (xy 132.97905 103.526691) (xy 132.97905 103.645309) (xy 133.001022 103.727308) (xy 133.009752 103.75989) + (xy 133.069057 103.862608) (xy 133.069059 103.86261) (xy 133.069061 103.862613) (xy 133.152937 103.946489) + (xy 133.152939 103.94649) (xy 133.152941 103.946492) (xy 133.25566 104.005797) (xy 133.255661 104.005797) + (xy 133.255664 104.005799) (xy 133.370241 104.0365) (xy 133.370243 104.0365) (xy 133.488857 104.0365) + (xy 133.488859 104.0365) (xy 133.603436 104.005799) (xy 133.603438 104.005797) (xy 133.60344 104.005797) + (xy 133.706158 103.946492) (xy 133.706158 103.946491) (xy 133.706163 103.946489) (xy 133.790039 103.862613) + (xy 133.836067 103.782891) (xy 133.849347 103.75989) (xy 133.849347 103.759888) (xy 133.849349 103.759886) + (xy 133.88005 103.645309) (xy 133.88005 103.526691) (xy 133.849349 103.412114) (xy 133.849347 103.412111) + (xy 133.849347 103.412109) (xy 133.790042 103.309391) (xy 133.79004 103.309389) (xy 133.790039 103.309387) + (xy 133.706163 103.225511) (xy 133.70616 103.225509) (xy 133.706158 103.225507) (xy 133.603439 103.166202) + (xy 133.60344 103.166202) (xy 133.589901 103.162574) (xy 133.488859 103.1355) (xy 133.370241 103.1355) + (xy 133.300117 103.154289) (xy 133.255659 103.166202) (xy 133.152941 103.225507) (xy 133.069057 103.309391) + (xy 133.009752 103.412109) (xy 132.999546 103.450198) (xy 132.97905 103.526691) (xy 114.086835 103.526691) + (xy 114.178458 103.473792) (xy 114.178458 103.473791) (xy 114.178463 103.473789) (xy 114.262339 103.389913) + (xy 114.262342 103.389908) (xy 114.321647 103.28719) (xy 114.321647 103.287188) (xy 114.321649 103.287186) + (xy 114.35235 103.172609) (xy 114.35235 103.053991) (xy 114.321649 102.939414) (xy 114.321647 102.939411) + (xy 114.321647 102.939409) (xy 114.262342 102.836691) (xy 114.26234 102.836689) (xy 114.262339 102.836687) + (xy 114.178463 102.752811) (xy 114.17846 102.752809) (xy 114.178458 102.752807) (xy 114.075739 102.693502) + (xy 114.07574 102.693502) (xy 114.062201 102.689874) (xy 113.961159 102.6628) (xy 113.842541 102.6628) + (xy 113.772417 102.681589) (xy 113.727959 102.693502) (xy 113.625241 102.752807) (xy 113.541357 102.836691) + (xy 113.482052 102.939409) (xy 113.482051 102.939414) (xy 113.45135 103.053991) (xy 99.68733 103.053991) + (xy 99.647339 103.030902) (xy 99.64734 103.030902) (xy 99.633801 103.027274) (xy 99.532759 103.0002) + (xy 99.414141 103.0002) (xy 99.344017 103.018989) (xy 99.299559 103.030902) (xy 99.196841 103.090207) + (xy 99.112957 103.174091) (xy 99.053652 103.276809) (xy 99.044923 103.309387) (xy 99.02295 103.391391) + (xy 80.825168 103.391391) (xy 80.825162 103.385002) (xy 80.824028 102.263791) (xy 98.67555 102.263791) + (xy 98.67555 102.382409) (xy 98.690035 102.436467) (xy 98.706252 102.49699) (xy 98.765557 102.599708) + (xy 98.765559 102.59971) (xy 98.765561 102.599713) (xy 98.849437 102.683589) (xy 98.849439 102.68359) + (xy 98.849441 102.683592) (xy 98.95216 102.742897) (xy 98.952161 102.742897) (xy 98.952164 102.742899) + (xy 99.066741 102.7736) (xy 99.066743 102.7736) (xy 99.185357 102.7736) (xy 99.185359 102.7736) + (xy 99.299936 102.742899) (xy 99.299938 102.742897) (xy 99.29994 102.742897) (xy 99.402658 102.683592) + (xy 99.402658 102.683591) (xy 99.402663 102.683589) (xy 99.486539 102.599713) (xy 99.545849 102.496986) + (xy 99.57655 102.382409) (xy 99.57655 102.263791) (xy 99.545849 102.149214) (xy 99.545847 102.149211) + (xy 99.545847 102.149209) (xy 99.486542 102.046491) (xy 99.48654 102.046489) (xy 99.486539 102.046487) + (xy 99.402663 101.962611) (xy 99.40266 101.962609) (xy 99.402658 101.962607) (xy 99.299939 101.903302) + (xy 99.29994 101.903302) (xy 99.286401 101.899674) (xy 99.185359 101.8726) (xy 99.066741 101.8726) + (xy 98.996617 101.891389) (xy 98.952159 101.903302) (xy 98.849441 101.962607) (xy 98.765557 102.046491) + (xy 98.706252 102.149209) (xy 98.706251 102.149214) (xy 98.67555 102.263791) (xy 80.824028 102.263791) + (xy 80.824022 102.257402) (xy 80.82291 101.158091) (xy 97.92335 101.158091) (xy 97.92335 101.276709) + (xy 97.950424 101.377751) (xy 97.954052 101.39129) (xy 98.013357 101.494008) (xy 98.013359 101.49401) + (xy 98.013361 101.494013) (xy 98.097237 101.577889) (xy 98.097239 101.57789) (xy 98.097241 101.577892) + (xy 98.19996 101.637197) (xy 98.199961 101.637197) (xy 98.199964 101.637199) (xy 98.314541 101.6679) + (xy 98.314543 101.6679) (xy 98.433157 101.6679) (xy 98.433159 101.6679) (xy 98.547736 101.637199) + (xy 98.547738 101.637197) (xy 98.54774 101.637197) (xy 98.650458 101.577892) (xy 98.650458 101.577891) + (xy 98.650463 101.577889) (xy 98.734339 101.494013) (xy 98.793649 101.391286) (xy 98.82435 101.276709) + (xy 98.82435 101.158091) (xy 98.793649 101.043514) (xy 98.793647 101.043511) (xy 98.793647 101.043509) + (xy 98.734342 100.940791) (xy 98.73434 100.940789) (xy 98.734339 100.940787) (xy 98.650463 100.856911) + (xy 98.65046 100.856909) (xy 98.650458 100.856907) (xy 98.547739 100.797602) (xy 98.54774 100.797602) + (xy 98.534201 100.793974) (xy 98.433159 100.7669) (xy 98.314541 100.7669) (xy 98.244417 100.785689) + (xy 98.199959 100.797602) (xy 98.097241 100.856907) (xy 98.013357 100.940791) (xy 97.954052 101.043509) + (xy 97.954051 101.043514) (xy 97.92335 101.158091) (xy 80.82291 101.158091) (xy 80.822904 101.151702) + (xy 80.821898 100.156391) (xy 102.13945 100.156391) (xy 102.13945 100.275009) (xy 102.166524 100.376051) + (xy 102.170152 100.38959) (xy 102.229457 100.492308) (xy 102.229459 100.49231) (xy 102.229461 100.492313) + (xy 102.313337 100.576189) (xy 102.313339 100.57619) (xy 102.313341 100.576192) (xy 102.41606 100.635497) + (xy 102.416061 100.635497) (xy 102.416064 100.635499) (xy 102.530641 100.6662) (xy 102.530643 100.6662) + (xy 102.649257 100.6662) (xy 102.649259 100.6662) (xy 102.763836 100.635499) (xy 102.763838 100.635497) + (xy 102.76384 100.635497) (xy 102.866558 100.576192) (xy 102.866558 100.576191) (xy 102.866563 100.576189) + (xy 102.950439 100.492313) (xy 103.009749 100.389586) (xy 103.04045 100.275009) (xy 103.04045 100.156391) + (xy 103.009749 100.041814) (xy 103.009747 100.041811) (xy 103.009747 100.041809) (xy 102.950442 99.939091) + (xy 102.95044 99.939089) (xy 102.950439 99.939087) (xy 102.866563 99.855211) (xy 102.86656 99.855209) + (xy 102.866558 99.855207) (xy 102.763839 99.795902) (xy 102.76384 99.795902) (xy 102.750301 99.792274) + (xy 102.649259 99.7652) (xy 102.530641 99.7652) (xy 102.460517 99.783989) (xy 102.416059 99.795902) + (xy 102.313341 99.855207) (xy 102.229457 99.939091) (xy 102.170152 100.041809) (xy 102.170151 100.041814) + (xy 102.13945 100.156391) (xy 80.821898 100.156391) (xy 80.821892 100.150002) (xy 80.820487 98.760691) + (xy 134.04125 98.760691) (xy 134.04125 98.879309) (xy 134.049447 98.9099) (xy 134.071952 98.99389) + (xy 134.131257 99.096608) (xy 134.131259 99.09661) (xy 134.131261 99.096613) (xy 134.215137 99.180489) + (xy 134.215139 99.18049) (xy 134.215141 99.180492) (xy 134.31786 99.239797) (xy 134.317861 99.239797) + (xy 134.317864 99.239799) (xy 134.432441 99.2705) (xy 134.432443 99.2705) (xy 134.551057 99.2705) + (xy 134.551059 99.2705) (xy 134.665636 99.239799) (xy 134.665638 99.239797) (xy 134.66564 99.239797) + (xy 134.768358 99.180492) (xy 134.768358 99.180491) (xy 134.768363 99.180489) (xy 134.852239 99.096613) + (xy 134.911549 98.993886) (xy 134.94225 98.879309) (xy 134.94225 98.760691) (xy 134.911549 98.646114) + (xy 134.911547 98.646111) (xy 134.911547 98.646109) (xy 134.852242 98.543391) (xy 134.85224 98.543389) + (xy 134.852239 98.543387) (xy 134.819043 98.510191) (xy 141.29225 98.510191) (xy 141.29225 98.628809) + (xy 141.29345 98.633286) (xy 141.322952 98.74339) (xy 141.382257 98.846108) (xy 141.382259 98.84611) + (xy 141.382261 98.846113) (xy 141.466137 98.929989) (xy 141.466139 98.92999) (xy 141.466141 98.929992) + (xy 141.56886 98.989297) (xy 141.568861 98.989297) (xy 141.568864 98.989299) (xy 141.683441 99.02) + (xy 141.683443 99.02) (xy 141.802057 99.02) (xy 141.802059 99.02) (xy 141.916636 98.989299) (xy 141.916638 98.989297) + (xy 141.91664 98.989297) (xy 142.019358 98.929992) (xy 142.019358 98.929991) (xy 142.019363 98.929989) + (xy 142.103239 98.846113) (xy 142.11838 98.819889) (xy 142.162547 98.74339) (xy 142.162547 98.743388) + (xy 142.162549 98.743386) (xy 142.19325 98.628809) (xy 142.19325 98.510191) (xy 142.162549 98.395614) + (xy 142.162547 98.395611) (xy 142.162547 98.395609) (xy 142.103242 98.292891) (xy 142.10324 98.292889) + (xy 142.103239 98.292887) (xy 142.019363 98.209011) (xy 142.01936 98.209009) (xy 142.019358 98.209007) + (xy 141.916639 98.149702) (xy 141.91664 98.149702) (xy 141.885656 98.1414) (xy 141.802059 98.119) + (xy 141.683441 98.119) (xy 141.613317 98.137789) (xy 141.568859 98.149702) (xy 141.466141 98.209007) + (xy 141.382257 98.292891) (xy 141.322952 98.395609) (xy 141.31288 98.433199) (xy 141.29225 98.510191) + (xy 134.819043 98.510191) (xy 134.768363 98.459511) (xy 134.751597 98.449831) (xy 134.751594 98.449828) + (xy 134.665639 98.400202) (xy 134.66564 98.400202) (xy 134.648517 98.395614) (xy 134.551059 98.3695) + (xy 134.432441 98.3695) (xy 134.362317 98.388289) (xy 134.317859 98.400202) (xy 134.215141 98.459507) + (xy 134.131257 98.543391) (xy 134.071952 98.646109) (xy 134.071951 98.646114) (xy 134.04125 98.760691) + (xy 80.820487 98.760691) (xy 80.820481 98.754302) (xy 80.819407 97.692391) (xy 121.55245 97.692391) + (xy 121.55245 97.811009) (xy 121.560087 97.839509) (xy 121.583152 97.92559) (xy 121.642457 98.028308) + (xy 121.642459 98.02831) (xy 121.642461 98.028313) (xy 121.726337 98.112189) (xy 121.726339 98.11219) + (xy 121.726341 98.112192) (xy 121.82906 98.171497) (xy 121.829061 98.171497) (xy 121.829064 98.171499) + (xy 121.943641 98.2022) (xy 121.943643 98.2022) (xy 122.062257 98.2022) (xy 122.062259 98.2022) + (xy 122.176836 98.171499) (xy 122.176838 98.171497) (xy 122.17684 98.171497) (xy 122.279558 98.112192) + (xy 122.279558 98.112191) (xy 122.279563 98.112189) (xy 122.363439 98.028313) (xy 122.363442 98.028308) + (xy 122.368186 98.020091) (xy 126.21405 98.020091) (xy 126.21405 98.138709) (xy 126.241124 98.239751) + (xy 126.244752 98.25329) (xy 126.304057 98.356008) (xy 126.304059 98.35601) (xy 126.304061 98.356013) + (xy 126.387937 98.439889) (xy 126.387939 98.43989) (xy 126.387941 98.439892) (xy 126.49066 98.499197) + (xy 126.490661 98.499197) (xy 126.490664 98.499199) (xy 126.605241 98.5299) (xy 126.605243 98.5299) + (xy 126.723857 98.5299) (xy 126.723859 98.5299) (xy 126.838436 98.499199) (xy 126.838438 98.499197) + (xy 126.83844 98.499197) (xy 126.941158 98.439892) (xy 126.941158 98.439891) (xy 126.941163 98.439889) + (xy 127.025039 98.356013) (xy 127.025042 98.356008) (xy 127.084347 98.25329) (xy 127.084347 98.253288) + (xy 127.084349 98.253286) (xy 127.11505 98.138709) (xy 127.11505 98.020091) (xy 127.097365 97.954091) + (xy 134.78105 97.954091) (xy 134.78105 98.072709) (xy 134.791629 98.112189) (xy 134.811752 98.18729) + (xy 134.871057 98.290008) (xy 134.871059 98.29001) (xy 134.871061 98.290013) (xy 134.954937 98.373889) + (xy 134.971702 98.383568) (xy 134.971704 98.38357) (xy 135.05766 98.433197) (xy 135.057661 98.433197) + (xy 135.057664 98.433199) (xy 135.172241 98.4639) (xy 135.172243 98.4639) (xy 135.290857 98.4639) + (xy 135.290859 98.4639) (xy 135.405436 98.433199) (xy 135.508163 98.373889) (xy 135.592039 98.290013) + (xy 135.594637 98.285514) (xy 135.651347 98.18729) (xy 135.651347 98.187288) (xy 135.651349 98.187286) + (xy 135.68205 98.072709) (xy 135.68205 97.954091) (xy 135.651349 97.839514) (xy 135.651347 97.839511) + (xy 135.651347 97.839509) (xy 135.592042 97.736791) (xy 135.59204 97.736789) (xy 135.592039 97.736787) + (xy 135.508163 97.652911) (xy 135.50816 97.652909) (xy 135.508158 97.652907) (xy 135.405439 97.593602) + (xy 135.40544 97.593602) (xy 135.346518 97.577814) (xy 135.290859 97.5629) (xy 135.172241 97.5629) + (xy 135.116582 97.577814) (xy 135.057659 97.593602) (xy 134.954941 97.652907) (xy 134.871057 97.736791) + (xy 134.811752 97.839509) (xy 134.811751 97.839514) (xy 134.78105 97.954091) (xy 127.097365 97.954091) + (xy 127.084349 97.905514) (xy 127.084347 97.905511) (xy 127.084347 97.905509) (xy 127.025042 97.802791) + (xy 127.02504 97.802789) (xy 127.025039 97.802787) (xy 126.941163 97.718911) (xy 126.94116 97.718909) + (xy 126.941158 97.718907) (xy 126.838439 97.659602) (xy 126.83844 97.659602) (xy 126.813454 97.652907) + (xy 126.723859 97.6289) (xy 126.605241 97.6289) (xy 126.563495 97.640086) (xy 126.490659 97.659602) + (xy 126.387941 97.718907) (xy 126.304057 97.802791) (xy 126.244752 97.905509) (xy 126.231735 97.954091) + (xy 126.21405 98.020091) (xy 122.368186 98.020091) (xy 122.400512 97.964102) (xy 122.400512 97.964101) + (xy 122.406291 97.954091) (xy 122.422749 97.925586) (xy 122.45345 97.811009) (xy 122.45345 97.692391) + (xy 122.422749 97.577814) (xy 122.422747 97.577811) (xy 122.422747 97.577809) (xy 122.363442 97.475091) + (xy 122.36344 97.475089) (xy 122.363439 97.475087) (xy 122.279563 97.391211) (xy 122.27956 97.391209) + (xy 122.279558 97.391207) (xy 122.176839 97.331902) (xy 122.17684 97.331902) (xy 122.163301 97.328274) + (xy 122.062259 97.3012) (xy 121.943641 97.3012) (xy 121.873517 97.319989) (xy 121.829059 97.331902) + (xy 121.726341 97.391207) (xy 121.642457 97.475091) (xy 121.583152 97.577809) (xy 121.571794 97.620197) + (xy 121.55245 97.692391) (xy 80.819407 97.692391) (xy 80.818886 97.176991) (xy 106.05325 97.176991) + (xy 106.05325 97.295609) (xy 106.062975 97.331902) (xy 106.083952 97.41019) (xy 106.143257 97.512908) + (xy 106.143259 97.51291) (xy 106.143261 97.512913) (xy 106.227137 97.596789) (xy 106.227139 97.59679) + (xy 106.227141 97.596792) (xy 106.32986 97.656097) (xy 106.329861 97.656097) (xy 106.329864 97.656099) + (xy 106.444441 97.6868) (xy 106.444443 97.6868) (xy 106.563057 97.6868) (xy 106.563059 97.6868) + (xy 106.677636 97.656099) (xy 106.677638 97.656097) (xy 106.67764 97.656097) (xy 106.774501 97.600174) + (xy 106.774509 97.600168) (xy 106.780363 97.596789) (xy 106.864239 97.512913) (xy 106.900389 97.4503) + (xy 106.923547 97.41019) (xy 106.923547 97.410188) (xy 106.923549 97.410186) (xy 106.95425 97.295609) + (xy 106.95425 97.176991) (xy 106.923549 97.062414) (xy 106.923547 97.062411) (xy 106.923547 97.062409) + (xy 106.864242 96.959691) (xy 106.86424 96.959689) (xy 106.864239 96.959687) (xy 106.780363 96.875811) + (xy 106.78036 96.875809) (xy 106.780358 96.875807) (xy 106.677639 96.816502) (xy 106.67764 96.816502) + (xy 106.664101 96.812874) (xy 106.563059 96.7858) (xy 106.444441 96.7858) (xy 106.374317 96.804589) + (xy 106.329859 96.816502) (xy 106.227141 96.875807) (xy 106.143257 96.959691) (xy 106.083952 97.062409) + (xy 106.066787 97.126469) (xy 106.05325 97.176991) (xy 80.818886 97.176991) (xy 80.81888 97.170602) + (xy 80.818018 96.317891) (xy 108.22385 96.317891) (xy 108.22385 96.436509) (xy 108.239017 96.493111) + (xy 108.254552 96.55109) (xy 108.313857 96.653808) (xy 108.313859 96.65381) (xy 108.313861 96.653813) + (xy 108.397737 96.737689) (xy 108.397739 96.73769) (xy 108.397741 96.737692) (xy 108.50046 96.796997) + (xy 108.500461 96.796997) (xy 108.500464 96.796999) (xy 108.615041 96.8277) (xy 108.615043 96.8277) + (xy 108.733657 96.8277) (xy 108.733659 96.8277) (xy 108.848236 96.796999) (xy 108.848238 96.796997) + (xy 108.84824 96.796997) (xy 108.950958 96.737692) (xy 108.950958 96.737691) (xy 108.950963 96.737689) + (xy 109.034839 96.653813) (xy 109.094149 96.551086) (xy 109.110761 96.489091) (xy 122.93205 96.489091) + (xy 122.93205 96.607709) (xy 122.951344 96.679714) (xy 122.962752 96.72229) (xy 123.022057 96.825008) + (xy 123.022059 96.82501) (xy 123.022061 96.825013) (xy 123.105937 96.908889) (xy 123.105939 96.90889) + (xy 123.105941 96.908892) (xy 123.20866 96.968197) (xy 123.208661 96.968197) (xy 123.208664 96.968199) + (xy 123.323241 96.9989) (xy 123.323243 96.9989) (xy 123.441857 96.9989) (xy 123.441859 96.9989) + (xy 123.556436 96.968199) (xy 123.556438 96.968197) (xy 123.55644 96.968197) (xy 123.659158 96.908892) + (xy 123.659158 96.908891) (xy 123.659163 96.908889) (xy 123.743039 96.825013) (xy 123.747953 96.816502) + (xy 123.760777 96.794291) (xy 126.87085 96.794291) (xy 126.87085 96.912909) (xy 126.885665 96.968199) + (xy 126.901552 97.02749) (xy 126.960857 97.130208) (xy 126.960859 97.13021) (xy 126.960861 97.130213) + (xy 127.044737 97.214089) (xy 127.044739 97.21409) (xy 127.044741 97.214092) (xy 127.14746 97.273397) + (xy 127.147461 97.273397) (xy 127.147464 97.273399) (xy 127.262041 97.3041) (xy 127.262043 97.3041) + (xy 127.380657 97.3041) (xy 127.380659 97.3041) (xy 127.495236 97.273399) (xy 127.495238 97.273397) + (xy 127.49524 97.273397) (xy 127.597958 97.214092) (xy 127.597958 97.214091) (xy 127.597963 97.214089) + (xy 127.670961 97.141091) (xy 133.78915 97.141091) (xy 133.78915 97.259709) (xy 133.800268 97.3012) + (xy 133.819852 97.37429) (xy 133.879157 97.477008) (xy 133.879159 97.47701) (xy 133.879161 97.477013) + (xy 133.963037 97.560889) (xy 133.963039 97.56089) (xy 133.963041 97.560892) (xy 134.06576 97.620197) + (xy 134.065761 97.620197) (xy 134.065764 97.620199) (xy 134.180341 97.6509) (xy 134.180343 97.6509) + (xy 134.298957 97.6509) (xy 134.298959 97.6509) (xy 134.413536 97.620199) (xy 134.413538 97.620197) + (xy 134.41354 97.620197) (xy 134.516258 97.560892) (xy 134.516258 97.560891) (xy 134.516263 97.560889) + (xy 134.600139 97.477013) (xy 134.615562 97.4503) (xy 134.640625 97.406891) (xy 137.68505 97.406891) + (xy 137.68505 97.525509) (xy 137.69453 97.560889) (xy 137.715752 97.64009) (xy 137.775057 97.742808) + (xy 137.775059 97.74281) (xy 137.775061 97.742813) (xy 137.858937 97.826689) (xy 137.858939 97.82669) + (xy 137.858941 97.826692) (xy 137.96166 97.885997) (xy 137.961661 97.885997) (xy 137.961664 97.885999) + (xy 138.076241 97.9167) (xy 138.076243 97.9167) (xy 138.194857 97.9167) (xy 138.194859 97.9167) + (xy 138.309436 97.885999) (xy 138.309438 97.885997) (xy 138.30944 97.885997) (xy 138.412158 97.826692) + (xy 138.412158 97.826691) (xy 138.412163 97.826689) (xy 138.496039 97.742813) (xy 138.52515 97.692392) + (xy 138.555347 97.64009) (xy 138.555347 97.640088) (xy 138.555349 97.640086) (xy 138.58605 97.525509) + (xy 138.58605 97.406891) (xy 138.555349 97.292314) (xy 138.555347 97.292311) (xy 138.555347 97.292309) + (xy 138.496042 97.189591) (xy 138.49604 97.189589) (xy 138.496039 97.189587) (xy 138.412163 97.105711) + (xy 138.41216 97.105709) (xy 138.412158 97.105707) (xy 138.309439 97.046402) (xy 138.30944 97.046402) + (xy 138.295901 97.042774) (xy 138.194859 97.0157) (xy 138.076241 97.0157) (xy 138.006117 97.034489) + (xy 137.961659 97.046402) (xy 137.858941 97.105707) (xy 137.775057 97.189591) (xy 137.715752 97.292309) + (xy 137.714868 97.295609) (xy 137.68505 97.406891) (xy 134.640625 97.406891) (xy 134.659446 97.374292) + (xy 134.659446 97.37429) (xy 134.659449 97.374286) (xy 134.69015 97.259709) (xy 134.69015 97.141091) + (xy 134.659449 97.026514) (xy 134.659447 97.026511) (xy 134.659447 97.026509) (xy 134.600142 96.923791) + (xy 134.60014 96.923789) (xy 134.600139 96.923787) (xy 134.516263 96.839911) (xy 134.51626 96.839909) + (xy 134.516258 96.839907) (xy 134.413539 96.780602) (xy 134.41354 96.780602) (xy 134.400001 96.776974) + (xy 134.298959 96.7499) (xy 134.180341 96.7499) (xy 134.110217 96.768689) (xy 134.065759 96.780602) + (xy 133.963041 96.839907) (xy 133.879157 96.923791) (xy 133.819852 97.026509) (xy 133.804153 97.085099) + (xy 133.78915 97.141091) (xy 127.670961 97.141091) (xy 127.681839 97.130213) (xy 127.720986 97.062409) + (xy 127.741147 97.02749) (xy 127.741147 97.027488) (xy 127.741149 97.027486) (xy 127.77185 96.912909) + (xy 127.77185 96.794291) (xy 127.741149 96.679714) (xy 127.741147 96.679711) (xy 127.741147 96.679709) + (xy 127.681842 96.576991) (xy 127.68184 96.576989) (xy 127.681839 96.576987) (xy 127.605243 96.500391) + (xy 143.96045 96.500391) (xy 143.96045 96.619009) (xy 143.969776 96.653813) (xy 143.991152 96.73359) + (xy 144.050457 96.836308) (xy 144.050459 96.83631) (xy 144.050461 96.836313) (xy 144.134337 96.920189) + (xy 144.134339 96.92019) (xy 144.134341 96.920192) (xy 144.23706 96.979497) (xy 144.237061 96.979497) + (xy 144.237064 96.979499) (xy 144.351641 97.0102) (xy 144.351643 97.0102) (xy 144.470257 97.0102) + (xy 144.470259 97.0102) (xy 144.584836 96.979499) (xy 144.584838 96.979497) (xy 144.58484 96.979497) + (xy 144.6524 96.940491) (xy 152.60605 96.940491) (xy 152.60605 97.059109) (xy 152.633124 97.160151) + (xy 152.636752 97.17369) (xy 152.696057 97.276408) (xy 152.696059 97.27641) (xy 152.696061 97.276413) + (xy 152.779937 97.360289) (xy 152.779939 97.36029) (xy 152.779941 97.360292) (xy 152.88266 97.419597) + (xy 152.882661 97.419597) (xy 152.882664 97.419599) (xy 152.997241 97.4503) (xy 152.997243 97.4503) + (xy 153.115857 97.4503) (xy 153.115859 97.4503) (xy 153.230436 97.419599) (xy 153.230438 97.419597) + (xy 153.23044 97.419597) (xy 153.333158 97.360292) (xy 153.333158 97.360291) (xy 153.333163 97.360289) + (xy 153.417039 97.276413) (xy 153.437831 97.2404) (xy 153.476347 97.17369) (xy 153.476347 97.173688) + (xy 153.476349 97.173686) (xy 153.50705 97.059109) (xy 153.50705 96.940491) (xy 153.476349 96.825914) + (xy 153.476347 96.825911) (xy 153.476347 96.825909) (xy 153.417042 96.723191) (xy 153.41704 96.723189) + (xy 153.417039 96.723187) (xy 153.333163 96.639311) (xy 153.33316 96.639309) (xy 153.333158 96.639307) + (xy 153.230439 96.580002) (xy 153.23044 96.580002) (xy 153.216901 96.576374) (xy 153.115859 96.5493) + (xy 152.997241 96.5493) (xy 152.927117 96.568089) (xy 152.882659 96.580002) (xy 152.779941 96.639307) + (xy 152.696057 96.723191) (xy 152.636752 96.825909) (xy 152.633 96.839911) (xy 152.60605 96.940491) + (xy 144.6524 96.940491) (xy 144.687558 96.920192) (xy 144.687558 96.920191) (xy 144.687563 96.920189) + (xy 144.771439 96.836313) (xy 144.828026 96.738302) (xy 144.830747 96.73359) (xy 144.830747 96.733588) + (xy 144.830749 96.733586) (xy 144.86145 96.619009) (xy 144.86145 96.500391) (xy 144.830749 96.385814) + (xy 144.830747 96.385811) (xy 144.830747 96.385809) (xy 144.771442 96.283091) (xy 144.77144 96.283089) + (xy 144.771439 96.283087) (xy 144.687563 96.199211) (xy 144.68756 96.199209) (xy 144.687558 96.199207) + (xy 144.584839 96.139902) (xy 144.58484 96.139902) (xy 144.571301 96.136274) (xy 144.470259 96.1092) + (xy 144.351641 96.1092) (xy 144.281517 96.127989) (xy 144.237059 96.139902) (xy 144.134341 96.199207) + (xy 144.050457 96.283091) (xy 143.991152 96.385809) (xy 143.977567 96.436509) (xy 143.96045 96.500391) + (xy 127.605243 96.500391) (xy 127.597963 96.493111) (xy 127.59796 96.493109) (xy 127.597958 96.493107) + (xy 127.495239 96.433802) (xy 127.49524 96.433802) (xy 127.481701 96.430174) (xy 127.380659 96.4031) + (xy 127.262041 96.4031) (xy 127.191917 96.421889) (xy 127.147459 96.433802) (xy 127.044741 96.493107) + (xy 126.960857 96.576991) (xy 126.901552 96.679709) (xy 126.901551 96.679714) (xy 126.87085 96.794291) + (xy 123.760777 96.794291) (xy 123.793103 96.738302) (xy 123.802347 96.72229) (xy 123.802347 96.722288) + (xy 123.802349 96.722286) (xy 123.83305 96.607709) (xy 123.83305 96.489091) (xy 123.802349 96.374514) + (xy 123.802347 96.374511) (xy 123.802347 96.374509) (xy 123.743042 96.271791) (xy 123.74304 96.271789) + (xy 123.743039 96.271787) (xy 123.659163 96.187911) (xy 123.65916 96.187909) (xy 123.659158 96.187907) + (xy 123.556439 96.128602) (xy 123.55644 96.128602) (xy 123.542901 96.124974) (xy 123.441859 96.0979) + (xy 123.323241 96.0979) (xy 123.253117 96.116689) (xy 123.208659 96.128602) (xy 123.105941 96.187907) + (xy 123.022057 96.271791) (xy 122.962752 96.374509) (xy 122.962751 96.374514) (xy 122.93205 96.489091) + (xy 109.110761 96.489091) (xy 109.12485 96.436509) (xy 109.12485 96.317891) (xy 109.094149 96.203314) + (xy 109.094147 96.203311) (xy 109.094147 96.203309) (xy 109.034842 96.100591) (xy 109.03484 96.100589) + (xy 109.034839 96.100587) (xy 108.950963 96.016711) (xy 108.95096 96.016709) (xy 108.950958 96.016707) + (xy 108.848239 95.957402) (xy 108.84824 95.957402) (xy 108.834701 95.953774) (xy 108.733659 95.9267) + (xy 108.615041 95.9267) (xy 108.546745 95.945) (xy 108.500459 95.957402) (xy 108.397741 96.016707) + (xy 108.313857 96.100591) (xy 108.254552 96.203309) (xy 108.252836 96.209713) (xy 108.22385 96.317891) + (xy 80.818018 96.317891) (xy 80.818012 96.311502) (xy 80.817093 95.402891) (xy 102.47065 95.402891) + (xy 102.47065 95.521509) (xy 102.479305 95.553809) (xy 102.501352 95.63609) (xy 102.560657 95.738808) + (xy 102.560659 95.73881) (xy 102.560661 95.738813) (xy 102.644537 95.822689) (xy 102.644539 95.82269) + (xy 102.644541 95.822692) (xy 102.74726 95.881997) (xy 102.747261 95.881997) (xy 102.747264 95.881999) + (xy 102.861841 95.9127) (xy 102.861843 95.9127) (xy 102.980457 95.9127) (xy 102.980459 95.9127) + (xy 103.095036 95.881999) (xy 103.095038 95.881997) (xy 103.09504 95.881997) (xy 103.197758 95.822692) + (xy 103.197758 95.822691) (xy 103.197763 95.822689) (xy 103.281639 95.738813) (xy 103.322298 95.66839) + (xy 103.340947 95.63609) (xy 103.340947 95.636088) (xy 103.340949 95.636086) (xy 103.37165 95.521509) + (xy 103.37165 95.402891) (xy 103.340949 95.288314) (xy 103.340947 95.288311) (xy 103.340947 95.288309) + (xy 103.281642 95.185591) (xy 103.28164 95.185589) (xy 103.281639 95.185587) (xy 103.197763 95.101711) + (xy 103.19776 95.101709) (xy 103.197758 95.101707) (xy 103.095039 95.042402) (xy 103.09504 95.042402) + (xy 103.081501 95.038774) (xy 102.980459 95.0117) (xy 102.861841 95.0117) (xy 102.791717 95.030489) + (xy 102.747259 95.042402) (xy 102.644541 95.101707) (xy 102.560657 95.185591) (xy 102.501352 95.288309) + (xy 102.492696 95.320614) (xy 102.47065 95.402891) (xy 80.817093 95.402891) (xy 80.817087 95.396502) + (xy 80.81605 94.371091) (xy 113.06855 94.371091) (xy 113.06855 94.489709) (xy 113.084317 94.548551) + (xy 113.099252 94.60429) (xy 113.158557 94.707008) (xy 113.158559 94.70701) (xy 113.158561 94.707013) + (xy 113.242437 94.790889) (xy 113.242439 94.79089) (xy 113.242441 94.790892) (xy 113.34516 94.850197) + (xy 113.345161 94.850197) (xy 113.345164 94.850199) (xy 113.459741 94.8809) (xy 113.459743 94.8809) + (xy 113.578357 94.8809) (xy 113.578359 94.8809) (xy 113.692936 94.850199) (xy 113.692938 94.850197) + (xy 113.69294 94.850197) (xy 113.795658 94.790892) (xy 113.795658 94.790891) (xy 113.795663 94.790889) + (xy 113.879539 94.707013) (xy 113.888449 94.691581) (xy 113.938847 94.60429) (xy 113.938847 94.604288) + (xy 113.938849 94.604286) (xy 113.96955 94.489709) (xy 113.96955 94.371091) (xy 113.938849 94.256514) + (xy 113.931503 94.243791) (xy 113.898081 94.185902) (xy 113.89808 94.1859) (xy 113.87954 94.153789) + (xy 113.879539 94.153787) (xy 113.868643 94.142891) (xy 114.19605 94.142891) (xy 114.19605 94.261509) + (xy 114.21242 94.322601) (xy 114.226752 94.37609) (xy 114.286057 94.478808) (xy 114.286059 94.47881) + (xy 114.286061 94.478813) (xy 114.369937 94.562689) (xy 114.369939 94.56269) (xy 114.369941 94.562692) + (xy 114.47266 94.621997) (xy 114.472661 94.621997) (xy 114.472664 94.621999) (xy 114.587241 94.6527) + (xy 114.587243 94.6527) (xy 114.705857 94.6527) (xy 114.705859 94.6527) (xy 114.820436 94.621999) + (xy 114.820438 94.621997) (xy 114.82044 94.621997) (xy 114.923158 94.562692) (xy 114.923158 94.562691) + (xy 114.923163 94.562689) (xy 115.007039 94.478813) (xy 115.008094 94.476986) (xy 115.065885 94.376891) + (xy 116.38055 94.376891) (xy 116.38055 94.495509) (xy 116.401475 94.5736) (xy 116.411252 94.61009) + (xy 116.470557 94.712808) (xy 116.470559 94.71281) (xy 116.470561 94.712813) (xy 116.554437 94.796689) + (xy 116.554439 94.79669) (xy 116.554441 94.796692) (xy 116.65716 94.855997) (xy 116.657161 94.855997) + (xy 116.657164 94.855999) (xy 116.771741 94.8867) (xy 116.771743 94.8867) (xy 116.890357 94.8867) + (xy 116.890359 94.8867) (xy 117.004936 94.855999) (xy 117.004938 94.855997) (xy 117.00494 94.855997) + (xy 117.107658 94.796692) (xy 117.107658 94.796691) (xy 117.107663 94.796689) (xy 117.160561 94.743791) + (xy 117.50115 94.743791) (xy 117.50115 94.862409) (xy 117.520277 94.933791) (xy 117.531852 94.97699) + (xy 117.591157 95.079708) (xy 117.591159 95.07971) (xy 117.591161 95.079713) (xy 117.675037 95.163589) + (xy 117.675039 95.16359) (xy 117.675041 95.163592) (xy 117.77776 95.222897) (xy 117.777761 95.222897) + (xy 117.777764 95.222899) (xy 117.892341 95.2536) (xy 117.892343 95.2536) (xy 118.010957 95.2536) + (xy 118.010959 95.2536) (xy 118.125536 95.222899) (xy 118.125538 95.222897) (xy 118.12554 95.222897) + (xy 118.228258 95.163592) (xy 118.228258 95.163591) (xy 118.228263 95.163589) (xy 118.312139 95.079713) + (xy 118.371449 94.976986) (xy 118.40215 94.862409) (xy 118.40215 94.743791) (xy 118.371449 94.629214) + (xy 118.371447 94.629211) (xy 118.371447 94.629209) (xy 118.312142 94.526491) (xy 118.31214 94.526489) + (xy 118.312139 94.526487) (xy 118.228263 94.442611) (xy 118.22826 94.442609) (xy 118.228258 94.442607) + (xy 118.125539 94.383302) (xy 118.12554 94.383302) (xy 118.101617 94.376892) (xy 118.010959 94.3526) + (xy 117.892341 94.3526) (xy 117.823332 94.371091) (xy 117.777759 94.383302) (xy 117.675041 94.442607) + (xy 117.591157 94.526491) (xy 117.531852 94.629209) (xy 117.525558 94.6527) (xy 117.50115 94.743791) + (xy 117.160561 94.743791) (xy 117.191539 94.712813) (xy 117.203797 94.691582) (xy 117.20598 94.687802) + (xy 117.250847 94.61009) (xy 117.250847 94.610088) (xy 117.250849 94.610086) (xy 117.28155 94.495509) + (xy 117.28155 94.376891) (xy 117.250849 94.262314) (xy 117.250846 94.262309) (xy 117.240155 94.243791) + (xy 124.24115 94.243791) (xy 124.24115 94.362409) (xy 124.251146 94.399713) (xy 124.271852 94.47699) + (xy 124.331157 94.579708) (xy 124.331159 94.57971) (xy 124.331161 94.579713) (xy 124.415037 94.663589) + (xy 124.415039 94.66359) (xy 124.415041 94.663592) (xy 124.51776 94.722897) (xy 124.517761 94.722897) + (xy 124.517764 94.722899) (xy 124.632341 94.7536) (xy 124.632345 94.7536) (xy 124.633518 94.753755) + (xy 124.634282 94.754119) (xy 124.638609 94.755279) (xy 124.638394 94.75608) (xy 124.688744 94.780095) + (xy 124.71794 94.833865) (xy 124.716225 94.87753) (xy 124.70115 94.933791) (xy 124.70115 95.052409) + (xy 124.714361 95.101711) (xy 124.731852 95.16699) (xy 124.791157 95.269708) (xy 124.791159 95.26971) + (xy 124.791161 95.269713) (xy 124.83514 95.313692) (xy 124.862916 95.368207) (xy 124.853345 95.428639) + (xy 124.81008 95.471904) (xy 124.778061 95.481846) (xy 124.772349 95.482598) (xy 124.772342 95.4826) + (xy 124.772341 95.4826) (xy 124.738304 95.49172) (xy 124.657759 95.513302) (xy 124.555041 95.572607) + (xy 124.471157 95.656491) (xy 124.411852 95.759209) (xy 124.394843 95.822689) (xy 124.38115 95.873791) + (xy 124.38115 95.992409) (xy 124.387661 96.016707) (xy 124.411852 96.10699) (xy 124.471157 96.209708) + (xy 124.471159 96.20971) (xy 124.471161 96.209713) (xy 124.555037 96.293589) (xy 124.555039 96.29359) + (xy 124.555041 96.293592) (xy 124.65776 96.352897) (xy 124.657761 96.352897) (xy 124.657764 96.352899) + (xy 124.772341 96.3836) (xy 124.772343 96.3836) (xy 124.890957 96.3836) (xy 124.890959 96.3836) + (xy 125.005536 96.352899) (xy 125.005538 96.352897) (xy 125.00554 96.352897) (xy 125.108258 96.293592) + (xy 125.108258 96.293591) (xy 125.108263 96.293589) (xy 125.192139 96.209713) (xy 125.192142 96.209708) + (xy 125.251447 96.10699) (xy 125.251447 96.106988) (xy 125.251449 96.106986) (xy 125.28215 95.992409) + (xy 125.28215 95.873791) (xy 125.251449 95.759214) (xy 125.251447 95.759211) (xy 125.251447 95.759209) + (xy 125.192142 95.656491) (xy 125.19214 95.656489) (xy 125.192139 95.656487) (xy 125.148158 95.612506) + (xy 125.120383 95.557992) (xy 125.129954 95.49756) (xy 125.173219 95.454295) (xy 125.205246 95.444351) + (xy 125.210946 95.4436) (xy 125.210959 95.4436) (xy 125.325536 95.412899) (xy 125.325538 95.412897) + (xy 125.32554 95.412897) (xy 125.428258 95.353592) (xy 125.428258 95.353591) (xy 125.428263 95.353589) + (xy 125.512139 95.269713) (xy 125.558687 95.189091) (xy 127.05685 95.189091) (xy 127.05685 95.307709) + (xy 127.080642 95.396502) (xy 127.087552 95.42229) (xy 127.146857 95.525008) (xy 127.146859 95.52501) + (xy 127.146861 95.525013) (xy 127.230737 95.608889) (xy 127.230739 95.60889) (xy 127.230741 95.608892) + (xy 127.33346 95.668197) (xy 127.333461 95.668197) (xy 127.333464 95.668199) (xy 127.448041 95.6989) + (xy 127.448043 95.6989) (xy 127.566657 95.6989) (xy 127.566659 95.6989) (xy 127.681236 95.668199) + (xy 127.681238 95.668197) (xy 127.68124 95.668197) (xy 127.783958 95.608892) (xy 127.783958 95.608891) + (xy 127.783963 95.608889) (xy 127.867839 95.525013) (xy 127.869863 95.521507) (xy 127.919698 95.435191) + (xy 136.22525 95.435191) (xy 136.22525 95.553809) (xy 136.226371 95.557992) (xy 136.255952 95.66839) + (xy 136.315257 95.771108) (xy 136.315259 95.77111) (xy 136.315261 95.771113) (xy 136.399137 95.854989) + (xy 136.399139 95.85499) (xy 136.399141 95.854992) (xy 136.50186 95.914297) (xy 136.501861 95.914297) + (xy 136.501864 95.914299) (xy 136.616441 95.945) (xy 136.616443 95.945) (xy 136.735057 95.945) (xy 136.735059 95.945) + (xy 136.849636 95.914299) (xy 136.849638 95.914297) (xy 136.84964 95.914297) (xy 136.952358 95.854992) + (xy 136.952358 95.854991) (xy 136.952363 95.854989) (xy 137.036239 95.771113) (xy 137.054888 95.738813) + (xy 137.095547 95.66839) (xy 137.095547 95.668388) (xy 137.095549 95.668386) (xy 137.12625 95.553809) + (xy 137.12625 95.435191) (xy 137.095549 95.320614) (xy 137.095547 95.320611) (xy 137.095547 95.320609) + (xy 137.036242 95.217891) (xy 137.03624 95.217889) (xy 137.036239 95.217887) (xy 136.952363 95.134011) + (xy 136.95236 95.134009) (xy 136.952358 95.134007) (xy 136.849639 95.074702) (xy 136.84964 95.074702) + (xy 136.836101 95.071074) (xy 136.735059 95.044) (xy 136.616441 95.044) (xy 136.546317 95.062789) + (xy 136.501859 95.074702) (xy 136.399141 95.134007) (xy 136.315257 95.217891) (xy 136.255952 95.320609) + (xy 136.243198 95.368207) (xy 136.22525 95.435191) (xy 127.919698 95.435191) (xy 127.927147 95.42229) + (xy 127.927147 95.422288) (xy 127.927149 95.422286) (xy 127.95785 95.307709) (xy 127.95785 95.189091) + (xy 127.927149 95.074514) (xy 127.927147 95.074511) (xy 127.927147 95.074509) (xy 127.867842 94.971791) + (xy 127.86784 94.971789) (xy 127.867839 94.971787) (xy 127.783963 94.887911) (xy 127.78396 94.887909) + (xy 127.783958 94.887907) (xy 127.681239 94.828602) (xy 127.68124 94.828602) (xy 127.646192 94.819211) + (xy 127.566659 94.7979) (xy 127.448041 94.7979) (xy 127.377917 94.816689) (xy 127.333459 94.828602) + (xy 127.230741 94.887907) (xy 127.146857 94.971791) (xy 127.087552 95.074509) (xy 127.07161 95.134007) + (xy 127.05685 95.189091) (xy 125.558687 95.189091) (xy 125.571449 95.166986) (xy 125.60215 95.052409) + (xy 125.60215 94.933791) (xy 125.571449 94.819214) (xy 125.51512 94.721651) (xy 125.502399 94.661803) + (xy 125.527285 94.605908) (xy 125.580273 94.575315) (xy 125.587935 94.573998) (xy 125.590955 94.5736) + (xy 125.590959 94.5736) (xy 125.705536 94.542899) (xy 125.705538 94.542897) (xy 125.70554 94.542897) + (xy 125.808258 94.483592) (xy 125.808258 94.483591) (xy 125.808263 94.483589) (xy 125.892139 94.399713) + (xy 125.905315 94.376892) (xy 125.951447 94.29699) (xy 125.951447 94.296988) (xy 125.951449 94.296986) + (xy 125.98215 94.182409) (xy 125.98215 94.063791) (xy 125.951449 93.949214) (xy 125.951447 93.949211) + (xy 125.951447 93.949209) (xy 125.892142 93.846491) (xy 125.89214 93.846489) (xy 125.892139 93.846487) + (xy 125.808263 93.762611) (xy 125.80826 93.762609) (xy 125.808258 93.762607) (xy 125.705539 93.703302) + (xy 125.70554 93.703302) (xy 125.687951 93.698589) (xy 125.590959 93.6726) (xy 125.472341 93.6726) + (xy 125.402217 93.691389) (xy 125.357759 93.703302) (xy 125.255041 93.762607) (xy 125.17116 93.846488) + (xy 125.126219 93.924326) (xy 125.080748 93.965266) (xy 125.019898 93.97166) (xy 124.973485 93.94646) + (xy 124.973409 93.94656) (xy 124.972779 93.946077) (xy 124.970481 93.944829) (xy 124.968263 93.942611) + (xy 124.96826 93.942609) (xy 124.968258 93.942607) (xy 124.865539 93.883302) (xy 124.86554 93.883302) + (xy 124.852001 93.879674) (xy 124.750959 93.8526) (xy 124.632341 93.8526) (xy 124.562217 93.871389) + (xy 124.517759 93.883302) (xy 124.415041 93.942607) (xy 124.331157 94.026491) (xy 124.271852 94.129209) + (xy 124.257598 94.182407) (xy 124.24115 94.243791) (xy 117.240155 94.243791) (xy 117.191542 94.159591) + (xy 117.19154 94.159589) (xy 117.191539 94.159587) (xy 117.107663 94.075711) (xy 117.10766 94.075709) + (xy 117.107658 94.075707) (xy 117.004939 94.016402) (xy 117.00494 94.016402) (xy 116.98329 94.010601) + (xy 116.890359 93.9857) (xy 116.771741 93.9857) (xy 116.701617 94.004489) (xy 116.657159 94.016402) + (xy 116.554441 94.075707) (xy 116.470557 94.159591) (xy 116.411252 94.262309) (xy 116.400163 94.303693) + (xy 116.38055 94.376891) (xy 115.065885 94.376891) (xy 115.066347 94.37609) (xy 115.066347 94.376088) + (xy 115.066349 94.376086) (xy 115.09705 94.261509) (xy 115.09705 94.142891) (xy 115.066349 94.028314) + (xy 115.066347 94.028311) (xy 115.066347 94.028309) (xy 115.007042 93.925591) (xy 115.00704 93.925589) + (xy 115.007039 93.925587) (xy 114.923163 93.841711) (xy 114.92316 93.841709) (xy 114.923158 93.841707) + (xy 114.820439 93.782402) (xy 114.82044 93.782402) (xy 114.806901 93.778774) (xy 114.705859 93.7517) + (xy 114.587241 93.7517) (xy 114.517117 93.770489) (xy 114.472659 93.782402) (xy 114.369941 93.841707) + (xy 114.286057 93.925591) (xy 114.226752 94.028309) (xy 114.209587 94.092369) (xy 114.19605 94.142891) + (xy 113.868643 94.142891) (xy 113.795663 94.069911) (xy 113.79566 94.069909) (xy 113.795658 94.069907) + (xy 113.692939 94.010602) (xy 113.69294 94.010602) (xy 113.679401 94.006974) (xy 113.578359 93.9799) + (xy 113.459741 93.9799) (xy 113.391818 93.9981) (xy 113.345159 94.010602) (xy 113.242441 94.069907) + (xy 113.158557 94.153791) (xy 113.099252 94.256509) (xy 113.097698 94.262309) (xy 113.06855 94.371091) + (xy 80.81605 94.371091) (xy 80.816044 94.364702) (xy 80.814946 93.278791) (xy 92.91615 93.278791) + (xy 92.91615 93.397409) (xy 92.943224 93.498451) (xy 92.946852 93.51199) (xy 93.006157 93.614708) + (xy 93.006159 93.61471) (xy 93.006161 93.614713) (xy 93.090037 93.698589) (xy 93.090039 93.69859) + (xy 93.090041 93.698592) (xy 93.19276 93.757897) (xy 93.192761 93.757897) (xy 93.192764 93.757899) + (xy 93.307341 93.7886) (xy 93.307343 93.7886) (xy 93.425957 93.7886) (xy 93.425959 93.7886) (xy 93.540536 93.757899) + (xy 93.540538 93.757897) (xy 93.54054 93.757897) (xy 93.643258 93.698592) (xy 93.643258 93.698591) + (xy 93.643263 93.698589) (xy 93.727139 93.614713) (xy 93.773918 93.53369) (xy 93.786447 93.51199) + (xy 93.786447 93.511988) (xy 93.786449 93.511986) (xy 93.81715 93.397409) (xy 93.81715 93.294491) + (xy 99.03025 93.294491) (xy 99.03025 93.413109) (xy 99.042689 93.45953) (xy 99.060952 93.52769) + (xy 99.120257 93.630408) (xy 99.120259 93.63041) (xy 99.120261 93.630413) (xy 99.204137 93.714289) + (xy 99.204139 93.71429) (xy 99.204141 93.714292) (xy 99.30686 93.773597) (xy 99.306861 93.773597) + (xy 99.306864 93.773599) (xy 99.421441 93.8043) (xy 99.421443 93.8043) (xy 99.540057 93.8043) (xy 99.540059 93.8043) + (xy 99.654636 93.773599) (xy 99.654638 93.773597) (xy 99.65464 93.773597) (xy 99.757358 93.714292) + (xy 99.757358 93.714291) (xy 99.757363 93.714289) (xy 99.841239 93.630413) (xy 99.841242 93.630408) + (xy 99.900547 93.52769) (xy 99.900547 93.527688) (xy 99.900549 93.527686) (xy 99.93125 93.413109) + (xy 99.93125 93.300491) (xy 154.26495 93.300491) (xy 154.26495 93.419109) (xy 154.289838 93.51199) + (xy 154.295652 93.53369) (xy 154.354957 93.636408) (xy 154.354959 93.63641) (xy 154.354961 93.636413) + (xy 154.438837 93.720289) (xy 154.438839 93.72029) (xy 154.438841 93.720292) (xy 154.54156 93.779597) + (xy 154.541561 93.779597) (xy 154.541564 93.779599) (xy 154.656141 93.8103) (xy 154.656143 93.8103) + (xy 154.774757 93.8103) (xy 154.774759 93.8103) (xy 154.889336 93.779599) (xy 154.889338 93.779597) + (xy 154.88934 93.779597) (xy 154.992058 93.720292) (xy 154.992058 93.720291) (xy 154.992063 93.720289) + (xy 155.075939 93.636413) (xy 155.135249 93.533686) (xy 155.16595 93.419109) (xy 155.16595 93.300491) + (xy 155.135249 93.185914) (xy 155.135247 93.185911) (xy 155.135247 93.185909) (xy 155.075942 93.083191) + (xy 155.07594 93.083189) (xy 155.075939 93.083187) (xy 154.992063 92.999311) (xy 154.99206 92.999309) + (xy 154.992058 92.999307) (xy 154.889339 92.940002) (xy 154.88934 92.940002) (xy 154.875801 92.936374) + (xy 154.774759 92.9093) (xy 154.656141 92.9093) (xy 154.586017 92.928089) (xy 154.541559 92.940002) + (xy 154.438841 92.999307) (xy 154.354957 93.083191) (xy 154.295652 93.185909) (xy 154.289662 93.208266) + (xy 154.26495 93.300491) (xy 99.93125 93.300491) (xy 99.93125 93.294491) (xy 99.900549 93.179914) + (xy 99.900547 93.179911) (xy 99.900547 93.179909) (xy 99.841242 93.077191) (xy 99.84124 93.077189) + (xy 99.841239 93.077187) (xy 99.757363 92.993311) (xy 99.75736 92.993309) (xy 99.757358 92.993307) + (xy 99.654639 92.934002) (xy 99.65464 92.934002) (xy 99.640824 92.9303) (xy 99.540059 92.9033) (xy 99.421441 92.9033) + (xy 99.351317 92.922089) (xy 99.306859 92.934002) (xy 99.204141 92.993307) (xy 99.120257 93.077191) + (xy 99.060952 93.179909) (xy 99.043787 93.243969) (xy 99.03025 93.294491) (xy 93.81715 93.294491) + (xy 93.81715 93.278791) (xy 93.786449 93.164214) (xy 93.786447 93.164211) (xy 93.786447 93.164209) + (xy 93.727142 93.061491) (xy 93.72714 93.061489) (xy 93.727139 93.061487) (xy 93.643263 92.977611) + (xy 93.64326 92.977609) (xy 93.643258 92.977607) (xy 93.540539 92.918302) (xy 93.54054 92.918302) + (xy 93.506944 92.9093) (xy 93.425959 92.8876) (xy 93.307341 92.8876) (xy 93.248748 92.9033) (xy 93.192759 92.918302) + (xy 93.090041 92.977607) (xy 93.006157 93.061491) (xy 92.946852 93.164209) (xy 92.936406 93.203195) + (xy 92.91615 93.278791) (xy 80.814946 93.278791) (xy 80.81494 93.272402) (xy 80.81296 91.314391) + (xy 112.60625 91.314391) (xy 112.60625 91.433009) (xy 112.627925 91.5139) (xy 112.636952 91.54759) + (xy 112.696257 91.650308) (xy 112.696259 91.65031) (xy 112.696261 91.650313) (xy 112.780137 91.734189) + (xy 112.780139 91.73419) (xy 112.780141 91.734192) (xy 112.88286 91.793497) (xy 112.882861 91.793497) + (xy 112.882864 91.793499) (xy 112.997441 91.8242) (xy 112.997443 91.8242) (xy 113.116057 91.8242) + (xy 113.116059 91.8242) (xy 113.230636 91.793499) (xy 113.230638 91.793497) (xy 113.23064 91.793497) + (xy 113.308072 91.748791) (xy 117.57375 91.748791) (xy 117.57375 91.867409) (xy 117.584977 91.909307) + (xy 117.604452 91.98199) (xy 117.663757 92.084708) (xy 117.663759 92.08471) (xy 117.663761 92.084713) + (xy 117.747637 92.168589) (xy 117.747639 92.16859) (xy 117.747641 92.168592) (xy 117.85036 92.227897) + (xy 117.850361 92.227897) (xy 117.850364 92.227899) (xy 117.964941 92.2586) (xy 117.964943 92.2586) + (xy 118.083557 92.2586) (xy 118.083559 92.2586) (xy 118.198136 92.227899) (xy 118.198138 92.227897) + (xy 118.19814 92.227897) (xy 118.300858 92.168592) (xy 118.300858 92.168591) (xy 118.300863 92.168589) + (xy 118.384739 92.084713) (xy 118.416732 92.0293) (xy 118.444047 91.98199) (xy 118.444047 91.981988) + (xy 118.444049 91.981986) (xy 118.464653 91.905091) (xy 125.19875 91.905091) (xy 125.19875 92.023709) + (xy 125.208475 92.060002) (xy 125.229452 92.13829) (xy 125.288757 92.241008) (xy 125.288759 92.24101) + (xy 125.288761 92.241013) (xy 125.372637 92.324889) (xy 125.372639 92.32489) (xy 125.372641 92.324892) + (xy 125.47536 92.384197) (xy 125.475361 92.384197) (xy 125.475364 92.384199) (xy 125.589941 92.4149) + (xy 125.589943 92.4149) (xy 125.708557 92.4149) (xy 125.708559 92.4149) (xy 125.823136 92.384199) + (xy 125.823138 92.384197) (xy 125.82314 92.384197) (xy 125.826614 92.382191) (xy 127.21505 92.382191) + (xy 127.21505 92.500809) (xy 127.235598 92.577494) (xy 127.245752 92.61539) (xy 127.305057 92.718108) + (xy 127.305059 92.71811) (xy 127.305061 92.718113) (xy 127.388937 92.801989) (xy 127.388939 92.80199) + (xy 127.388941 92.801992) (xy 127.49166 92.861297) (xy 127.491661 92.861297) (xy 127.491664 92.861299) + (xy 127.606241 92.892) (xy 127.606243 92.892) (xy 127.724857 92.892) (xy 127.724859 92.892) (xy 127.839436 92.861299) + (xy 127.839438 92.861297) (xy 127.83944 92.861297) (xy 127.942158 92.801992) (xy 127.942158 92.801991) + (xy 127.942163 92.801989) (xy 128.026039 92.718113) (xy 128.031763 92.708199) (xy 128.077232 92.667257) + (xy 128.138083 92.660861) (xy 128.191071 92.691454) (xy 128.203237 92.708199) (xy 128.208961 92.718113) + (xy 128.292837 92.801989) (xy 128.292839 92.80199) (xy 128.292841 92.801992) (xy 128.39556 92.861297) + (xy 128.395561 92.861297) (xy 128.395564 92.861299) (xy 128.510141 92.892) (xy 128.510143 92.892) + (xy 128.628757 92.892) (xy 128.628759 92.892) (xy 128.743336 92.861299) (xy 128.743338 92.861297) + (xy 128.74334 92.861297) (xy 128.846058 92.801992) (xy 128.846058 92.801991) (xy 128.846063 92.801989) + (xy 128.929939 92.718113) (xy 128.989249 92.615386) (xy 128.98925 92.61538) (xy 128.991731 92.609394) + (xy 128.994028 92.610345) (xy 129.021498 92.568021) (xy 129.078614 92.546079) (xy 129.137718 92.561899) + (xy 129.176236 92.609439) (xy 129.179447 92.619318) (xy 129.18335 92.633885) (xy 129.183352 92.633889) + (xy 129.242657 92.736608) (xy 129.242659 92.73661) (xy 129.242661 92.736613) (xy 129.326537 92.820489) + (xy 129.326539 92.82049) (xy 129.326541 92.820492) (xy 129.42926 92.879797) (xy 129.429261 92.879797) + (xy 129.429264 92.879799) (xy 129.543841 92.9105) (xy 129.543843 92.9105) (xy 129.662457 92.9105) + (xy 129.662459 92.9105) (xy 129.777036 92.879799) (xy 129.858374 92.832837) (xy 129.918221 92.820116) + (xy 129.974117 92.845002) (xy 130.0035 92.89295) (xy 130.02725 92.981585) (xy 130.027252 92.981589) + (xy 130.086557 93.084308) (xy 130.086559 93.08431) (xy 130.086561 93.084313) (xy 130.170437 93.168189) + (xy 130.170439 93.16819) (xy 130.170441 93.168192) (xy 130.27316 93.227497) (xy 130.273161 93.227497) + (xy 130.273164 93.227499) (xy 130.387741 93.2582) (xy 130.387743 93.2582) (xy 130.506357 93.2582) + (xy 130.506359 93.2582) (xy 130.620936 93.227499) (xy 130.620938 93.227497) (xy 130.62094 93.227497) + (xy 130.65424 93.208271) (xy 130.654249 93.208266) (xy 130.680463 93.19313) (xy 130.723663 93.168189) + (xy 130.807539 93.084313) (xy 130.81655 93.068706) (xy 130.866847 92.98159) (xy 130.866847 92.981588) + (xy 130.866849 92.981586) (xy 130.89755 92.867009) (xy 130.89755 92.748391) (xy 130.866849 92.633814) + (xy 130.866847 92.633811) (xy 130.866847 92.633809) (xy 130.807542 92.531091) (xy 130.80754 92.531089) + (xy 130.807539 92.531087) (xy 130.723663 92.447211) (xy 130.72366 92.447209) (xy 130.723658 92.447207) + (xy 130.677385 92.420491) (xy 140.09245 92.420491) (xy 140.09245 92.539109) (xy 140.112889 92.615389) + (xy 140.123152 92.65369) (xy 140.182457 92.756408) (xy 140.182459 92.75641) (xy 140.182461 92.756413) + (xy 140.266337 92.840289) (xy 140.266339 92.84029) (xy 140.266341 92.840292) (xy 140.36906 92.899597) + (xy 140.369061 92.899597) (xy 140.369064 92.899599) (xy 140.483641 92.9303) (xy 140.483643 92.9303) + (xy 140.602257 92.9303) (xy 140.602259 92.9303) (xy 140.716836 92.899599) (xy 140.716838 92.899597) + (xy 140.71684 92.899597) (xy 140.819558 92.840292) (xy 140.819558 92.840291) (xy 140.819563 92.840289) + (xy 140.903439 92.756413) (xy 140.925552 92.718113) (xy 140.962747 92.65369) (xy 140.962747 92.653688) + (xy 140.962749 92.653686) (xy 140.99345 92.539109) (xy 140.99345 92.420491) (xy 140.962749 92.305914) + (xy 140.962747 92.305911) (xy 140.962747 92.305909) (xy 140.903442 92.203191) (xy 140.90344 92.203189) + (xy 140.903439 92.203187) (xy 140.819563 92.119311) (xy 140.81956 92.119309) (xy 140.819558 92.119307) + (xy 140.716839 92.060002) (xy 140.71684 92.060002) (xy 140.703301 92.056374) (xy 140.602259 92.0293) + (xy 140.483641 92.0293) (xy 140.413517 92.048089) (xy 140.369059 92.060002) (xy 140.266341 92.119307) + (xy 140.182457 92.203191) (xy 140.123152 92.305909) (xy 140.114132 92.339572) (xy 140.09245 92.420491) + (xy 130.677385 92.420491) (xy 130.620939 92.387902) (xy 130.62094 92.387902) (xy 130.593203 92.38047) + (xy 130.506359 92.3572) (xy 130.387741 92.3572) (xy 130.332291 92.372058) (xy 130.273162 92.387901) + (xy 130.191825 92.434862) (xy 130.131976 92.447583) (xy 130.076081 92.422696) (xy 130.046698 92.374749) + (xy 130.022949 92.286114) (xy 130.022947 92.28611) (xy 130.022947 92.286109) (xy 129.963642 92.183391) + (xy 129.96364 92.183389) (xy 129.963639 92.183387) (xy 129.879763 92.099511) (xy 129.87976 92.099509) + (xy 129.879758 92.099507) (xy 129.777039 92.040202) (xy 129.77704 92.040202) (xy 129.736353 92.0293) + (xy 129.662459 92.0095) (xy 129.543841 92.0095) (xy 129.473717 92.028289) (xy 129.429259 92.040202) + (xy 129.326541 92.099507) (xy 129.242657 92.183391) (xy 129.183352 92.28611) (xy 129.180869 92.292106) + (xy 129.178579 92.291157) (xy 129.151062 92.33351) (xy 129.093935 92.355423) (xy 129.034839 92.339572) + (xy 128.996345 92.292013) (xy 128.993151 92.282178) (xy 128.989248 92.267611) (xy 128.989247 92.26761) + (xy 128.929942 92.164891) (xy 128.92994 92.164889) (xy 128.929939 92.164887) (xy 128.846063 92.081011) + (xy 128.84606 92.081009) (xy 128.846058 92.081007) (xy 128.743339 92.021702) (xy 128.74334 92.021702) + (xy 128.729801 92.018074) (xy 128.628759 91.991) (xy 128.510141 91.991) (xy 128.440017 92.009789) + (xy 128.395559 92.021702) (xy 128.292841 92.081007) (xy 128.208957 92.164891) (xy 128.203235 92.174803) + (xy 128.157765 92.215743) (xy 128.096915 92.222137) (xy 128.043927 92.191543) (xy 128.031765 92.174803) + (xy 128.026042 92.164891) (xy 128.02604 92.164889) (xy 128.026039 92.164887) (xy 127.942163 92.081011) + (xy 127.94216 92.081009) (xy 127.942158 92.081007) (xy 127.839439 92.021702) (xy 127.83944 92.021702) + (xy 127.825901 92.018074) (xy 127.724859 91.991) (xy 127.606241 91.991) (xy 127.536117 92.009789) + (xy 127.491659 92.021702) (xy 127.388941 92.081007) (xy 127.305057 92.164891) (xy 127.245752 92.267609) + (xy 127.239213 92.292013) (xy 127.21505 92.382191) (xy 125.826614 92.382191) (xy 125.925858 92.324892) + (xy 125.925858 92.324891) (xy 125.925863 92.324889) (xy 126.009739 92.241013) (xy 126.009742 92.241008) + (xy 126.069047 92.13829) (xy 126.069047 92.138288) (xy 126.069049 92.138286) (xy 126.09975 92.023709) + (xy 126.09975 91.905091) (xy 126.069049 91.790514) (xy 126.069047 91.790511) (xy 126.069047 91.790509) + (xy 126.009742 91.687791) (xy 126.00974 91.687789) (xy 126.009739 91.687787) (xy 125.925863 91.603911) + (xy 125.92586 91.603909) (xy 125.925858 91.603907) (xy 125.823139 91.544602) (xy 125.82314 91.544602) + (xy 125.809601 91.540974) (xy 125.708559 91.5139) (xy 125.589941 91.5139) (xy 125.524306 91.531487) + (xy 125.475359 91.544602) (xy 125.372641 91.603907) (xy 125.288757 91.687791) (xy 125.229452 91.790509) + (xy 125.220425 91.8242) (xy 125.19875 91.905091) (xy 118.464653 91.905091) (xy 118.47475 91.867409) + (xy 118.47475 91.748791) (xy 118.444049 91.634214) (xy 118.444047 91.634211) (xy 118.444047 91.634209) + (xy 118.384742 91.531491) (xy 118.38474 91.531489) (xy 118.384739 91.531487) (xy 118.300863 91.447611) + (xy 118.30086 91.447609) (xy 118.300858 91.447607) (xy 118.198139 91.388302) (xy 118.19814 91.388302) + (xy 118.180054 91.383456) (xy 118.083559 91.3576) (xy 117.964941 91.3576) (xy 117.894817 91.376389) + (xy 117.850359 91.388302) (xy 117.747641 91.447607) (xy 117.663757 91.531491) (xy 117.604452 91.634209) + (xy 117.589655 91.689432) (xy 117.57375 91.748791) (xy 113.308072 91.748791) (xy 113.333358 91.734192) + (xy 113.333358 91.734191) (xy 113.333363 91.734189) (xy 113.417239 91.650313) (xy 113.436544 91.616876) + (xy 113.476547 91.54759) (xy 113.476547 91.547588) (xy 113.476549 91.547586) (xy 113.50725 91.433009) + (xy 113.50725 91.314391) (xy 113.494924 91.268391) (xy 123.60395 91.268391) (xy 123.60395 91.387009) + (xy 123.624662 91.464308) (xy 123.634652 91.50159) (xy 123.693957 91.604308) (xy 123.693959 91.60431) + (xy 123.693961 91.604313) (xy 123.777837 91.688189) (xy 123.777839 91.68819) (xy 123.777841 91.688192) + (xy 123.88056 91.747497) (xy 123.880561 91.747497) (xy 123.880564 91.747499) (xy 123.995141 91.7782) + (xy 123.995143 91.7782) (xy 124.113757 91.7782) (xy 124.113759 91.7782) (xy 124.228336 91.747499) + (xy 124.228338 91.747497) (xy 124.22834 91.747497) (xy 124.331058 91.688192) (xy 124.331058 91.688191) + (xy 124.331063 91.688189) (xy 124.414939 91.604313) (xy 124.415171 91.603911) (xy 124.474247 91.50159) + (xy 124.474247 91.501588) (xy 124.474249 91.501586) (xy 124.50495 91.387009) (xy 124.50495 91.268391) + (xy 124.474249 91.153814) (xy 124.474247 91.153811) (xy 124.474247 91.153809) (xy 124.414942 91.051091) + (xy 124.41494 91.051089) (xy 124.414939 91.051087) (xy 124.331063 90.967211) (xy 124.33106 90.967209) + (xy 124.331058 90.967207) (xy 124.228339 90.907902) (xy 124.22834 90.907902) (xy 124.214801 90.904274) + (xy 124.113759 90.8772) (xy 123.995141 90.8772) (xy 123.925017 90.895989) (xy 123.880559 90.907902) + (xy 123.777841 90.967207) (xy 123.693957 91.051091) (xy 123.634652 91.153809) (xy 123.634651 91.153814) + (xy 123.60395 91.268391) (xy 113.494924 91.268391) (xy 113.476549 91.199814) (xy 113.476547 91.199811) + (xy 113.476547 91.199809) (xy 113.417242 91.097091) (xy 113.41724 91.097089) (xy 113.417239 91.097087) + (xy 113.333363 91.013211) (xy 113.33336 91.013209) (xy 113.333358 91.013207) (xy 113.230639 90.953902) + (xy 113.23064 90.953902) (xy 113.217101 90.950274) (xy 113.116059 90.9232) (xy 112.997441 90.9232) + (xy 112.927317 90.941989) (xy 112.882859 90.953902) (xy 112.780141 91.013207) (xy 112.696257 91.097091) + (xy 112.636952 91.199809) (xy 112.636951 91.199814) (xy 112.60625 91.314391) (xy 80.81296 91.314391) + (xy 80.812954 91.308002) (xy 80.810975 89.350625) (xy 118.83115 89.350625) (xy 118.83115 89.495574) + (xy 118.868667 89.635589) (xy 118.941137 89.76111) (xy 118.941139 89.761112) (xy 118.941141 89.761115) + (xy 119.043635 89.863609) (xy 119.043637 89.86361) (xy 119.043639 89.863612) (xy 119.169161 89.936082) + (xy 119.169162 89.936082) (xy 119.169165 89.936084) (xy 119.309175 89.9736) (xy 119.309176 89.9736) + (xy 119.454124 89.9736) (xy 119.454125 89.9736) (xy 119.594135 89.936084) (xy 119.594137 89.936082) + (xy 119.594139 89.936082) (xy 119.71966 89.863612) (xy 119.71966 89.863611) (xy 119.719665 89.863609) + (xy 119.822159 89.761115) (xy 119.878453 89.663612) (xy 119.894632 89.635589) (xy 119.894632 89.635587) + (xy 119.894634 89.635585) (xy 119.93215 89.495575) (xy 119.93215 89.350625) (xy 119.894634 89.210615) + (xy 119.894632 89.210612) (xy 119.894632 89.21061) (xy 119.884832 89.193636) (xy 119.859999 89.150625) + (xy 126.27115 89.150625) (xy 126.27115 89.295575) (xy 126.285901 89.350625) (xy 126.308667 89.435589) + (xy 126.381137 89.56111) (xy 126.381139 89.561112) (xy 126.381141 89.561115) (xy 126.483635 89.663609) + (xy 126.483637 89.66361) (xy 126.483639 89.663612) (xy 126.609161 89.736082) (xy 126.609162 89.736082) + (xy 126.609165 89.736084) (xy 126.749175 89.7736) (xy 126.749176 89.7736) (xy 126.894124 89.7736) + (xy 126.894125 89.7736) (xy 127.034135 89.736084) (xy 127.034137 89.736082) (xy 127.034139 89.736082) + (xy 127.15966 89.663612) (xy 127.15966 89.663611) (xy 127.159665 89.663609) (xy 127.262159 89.561115) + (xy 127.265893 89.554648) (xy 127.334632 89.435589) (xy 127.334632 89.435587) (xy 127.334634 89.435585) + (xy 127.37215 89.295575) (xy 127.37215 89.150625) (xy 127.334634 89.010615) (xy 127.334632 89.010612) + (xy 127.334632 89.01061) (xy 127.314189 88.975202) (xy 127.289356 88.932191) (xy 136.87295 88.932191) + (xy 136.87295 89.050809) (xy 136.886265 89.1005) (xy 136.903652 89.16539) (xy 136.962957 89.268108) + (xy 136.962959 89.26811) (xy 136.962961 89.268113) (xy 137.046837 89.351989) (xy 137.046839 89.35199) + (xy 137.046841 89.351992) (xy 137.14956 89.411297) (xy 137.149561 89.411297) (xy 137.149564 89.411299) + (xy 137.264141 89.442) (xy 137.264143 89.442) (xy 137.382757 89.442) (xy 137.382759 89.442) (xy 137.497336 89.411299) + (xy 137.497338 89.411297) (xy 137.49734 89.411297) (xy 137.600058 89.351992) (xy 137.600058 89.351991) + (xy 137.600063 89.351989) (xy 137.683939 89.268113) (xy 137.705608 89.230581) (xy 137.743247 89.16539) + (xy 137.743247 89.165388) (xy 137.743249 89.165386) (xy 137.77395 89.050809) (xy 137.77395 88.932191) + (xy 137.743249 88.817614) (xy 137.743247 88.817611) (xy 137.743247 88.817609) (xy 137.683942 88.714891) + (xy 137.68394 88.714889) (xy 137.683939 88.714887) (xy 137.600063 88.631011) (xy 137.60006 88.631009) + (xy 137.600058 88.631007) (xy 137.497339 88.571702) (xy 137.49734 88.571702) (xy 137.483801 88.568074) + (xy 137.382759 88.541) (xy 137.264141 88.541) (xy 137.194017 88.559789) (xy 137.149559 88.571702) + (xy 137.046841 88.631007) (xy 136.962957 88.714891) (xy 136.903652 88.817609) (xy 136.903651 88.817614) + (xy 136.87295 88.932191) (xy 127.289356 88.932191) (xy 127.262162 88.885089) (xy 127.26216 88.885087) + (xy 127.262159 88.885085) (xy 127.159665 88.782591) (xy 127.159662 88.782589) (xy 127.15966 88.782587) + (xy 127.034138 88.710117) (xy 127.034139 88.710117) (xy 126.946287 88.686577) (xy 126.894125 88.6726) + (xy 126.749175 88.6726) (xy 126.697013 88.686577) (xy 126.60916 88.710117) (xy 126.483639 88.782587) + (xy 126.381137 88.885089) (xy 126.308667 89.01061) (xy 126.284581 89.1005) (xy 126.27115 89.150625) + (xy 119.859999 89.150625) (xy 119.822162 89.085089) (xy 119.82216 89.085087) (xy 119.822159 89.085085) + (xy 119.719665 88.982591) (xy 119.719662 88.982589) (xy 119.71966 88.982587) (xy 119.594138 88.910117) + (xy 119.594139 88.910117) (xy 119.55574 88.899828) (xy 119.454125 88.8726) (xy 119.309175 88.8726) + (xy 119.262581 88.885085) (xy 119.16916 88.910117) (xy 119.043639 88.982587) (xy 118.941137 89.085089) + (xy 118.868667 89.21061) (xy 118.83115 89.350625) (xy 80.810975 89.350625) (xy 80.810969 89.344236) + (xy 80.805913 84.342291) (xy 93.69865 84.342291) (xy 93.69865 84.460909) (xy 93.716122 84.526114) + (xy 93.729352 84.57549) (xy 93.788657 84.678208) (xy 93.788659 84.67821) (xy 93.788661 84.678213) + (xy 93.872537 84.762089) (xy 93.872539 84.76209) (xy 93.872541 84.762092) (xy 93.97526 84.821397) + (xy 93.975261 84.821397) (xy 93.975264 84.821399) (xy 94.089841 84.8521) (xy 94.089843 84.8521) + (xy 94.208457 84.8521) (xy 94.208459 84.8521) (xy 94.323036 84.821399) (xy 94.323038 84.821397) + (xy 94.32304 84.821397) (xy 94.425758 84.762092) (xy 94.425758 84.762091) (xy 94.425763 84.762089) + (xy 94.509639 84.678213) (xy 94.55202 84.604808) (xy 94.568947 84.57549) (xy 94.568947 84.575488) + (xy 94.568949 84.575486) (xy 94.59965 84.460909) (xy 94.59965 84.342291) (xy 94.579982 84.268891) + (xy 99.91065 84.268891) (xy 99.91065 84.387509) (xy 99.920187 84.4231) (xy 99.941352 84.50209) (xy 100.000657 84.604808) + (xy 100.000659 84.60481) (xy 100.000661 84.604813) (xy 100.084537 84.688689) (xy 100.084539 84.68869) + (xy 100.084541 84.688692) (xy 100.18726 84.747997) (xy 100.187261 84.747997) (xy 100.187264 84.747999) + (xy 100.301841 84.7787) (xy 100.301843 84.7787) (xy 100.420457 84.7787) (xy 100.420459 84.7787) + (xy 100.535036 84.747999) (xy 100.535038 84.747997) (xy 100.53504 84.747997) (xy 100.637758 84.688692) + (xy 100.637758 84.688691) (xy 100.637763 84.688689) (xy 100.721639 84.604813) (xy 100.721642 84.604808) + (xy 100.780947 84.50209) (xy 100.780947 84.502088) (xy 100.780949 84.502086) (xy 100.81165 84.387509) + (xy 100.81165 84.268891) (xy 100.783328 84.163191) (xy 102.87725 84.163191) (xy 102.87725 84.281809) + (xy 102.900733 84.369447) (xy 102.907952 84.39639) (xy 102.967257 84.499108) (xy 102.967259 84.49911) + (xy 102.967261 84.499113) (xy 103.051137 84.582989) (xy 103.051139 84.58299) (xy 103.051141 84.582992) + (xy 103.15386 84.642297) (xy 103.153861 84.642297) (xy 103.153864 84.642299) (xy 103.268441 84.673) + (xy 103.268443 84.673) (xy 103.387057 84.673) (xy 103.387059 84.673) (xy 103.501636 84.642299) (xy 103.501638 84.642297) + (xy 103.50164 84.642297) (xy 103.604358 84.582992) (xy 103.604358 84.582991) (xy 103.604363 84.582989) + (xy 103.688239 84.499113) (xy 103.710296 84.460909) (xy 103.747547 84.39639) (xy 103.747547 84.396388) + (xy 103.747549 84.396386) (xy 103.77825 84.281809) (xy 103.77825 84.163191) (xy 103.747549 84.048614) + (xy 103.747547 84.048611) (xy 103.747547 84.048609) (xy 103.688242 83.945891) (xy 103.68824 83.945889) + (xy 103.688239 83.945887) (xy 103.604363 83.862011) (xy 103.60436 83.862009) (xy 103.604358 83.862007) + (xy 103.501639 83.802702) (xy 103.50164 83.802702) (xy 103.488101 83.799074) (xy 103.387059 83.772) + (xy 103.268441 83.772) (xy 103.198317 83.790789) (xy 103.153859 83.802702) (xy 103.051141 83.862007) + (xy 102.967257 83.945891) (xy 102.907952 84.048609) (xy 102.896446 84.09155) (xy 102.87725 84.163191) + (xy 100.783328 84.163191) (xy 100.780949 84.154314) (xy 100.780947 84.154311) (xy 100.780947 84.154309) + (xy 100.721642 84.051591) (xy 100.72164 84.051589) (xy 100.721639 84.051587) (xy 100.637763 83.967711) + (xy 100.63776 83.967709) (xy 100.637758 83.967707) (xy 100.535039 83.908402) (xy 100.53504 83.908402) + (xy 100.515585 83.903189) (xy 100.420459 83.8777) (xy 100.301841 83.8777) (xy 100.231717 83.896489) + (xy 100.187259 83.908402) (xy 100.084541 83.967707) (xy 100.000657 84.051591) (xy 99.941352 84.154309) + (xy 99.941351 84.154314) (xy 99.91065 84.268891) (xy 94.579982 84.268891) (xy 94.568949 84.227714) + (xy 94.568947 84.227711) (xy 94.568947 84.227709) (xy 94.509642 84.124991) (xy 94.50964 84.124989) + (xy 94.509639 84.124987) (xy 94.425763 84.041111) (xy 94.42576 84.041109) (xy 94.425758 84.041107) + (xy 94.323039 83.981802) (xy 94.32304 83.981802) (xy 94.309501 83.978174) (xy 94.208459 83.9511) + (xy 94.089841 83.9511) (xy 94.019717 83.969889) (xy 93.975259 83.981802) (xy 93.872541 84.041107) + (xy 93.788657 84.124991) (xy 93.729352 84.227709) (xy 93.716382 84.276114) (xy 93.69865 84.342291) + (xy 80.805913 84.342291) (xy 80.805907 84.335902) (xy 80.805045 83.483391) (xy 130.86885 83.483391) + (xy 130.86885 83.602009) (xy 130.872834 83.616876) (xy 130.899552 83.71659) (xy 130.958857 83.819308) + (xy 130.958859 83.81931) (xy 130.958861 83.819313) (xy 131.042737 83.903189) (xy 131.042739 83.90319) + (xy 131.042741 83.903192) (xy 131.14546 83.962497) (xy 131.145461 83.962497) (xy 131.145464 83.962499) + (xy 131.260041 83.9932) (xy 131.260043 83.9932) (xy 131.378657 83.9932) (xy 131.378659 83.9932) + (xy 131.493236 83.962499) (xy 131.493238 83.962497) (xy 131.49324 83.962497) (xy 131.595958 83.903192) + (xy 131.595958 83.903191) (xy 131.595963 83.903189) (xy 131.679839 83.819313) (xy 131.680513 83.818146) + (xy 131.739147 83.71659) (xy 131.739147 83.716588) (xy 131.739149 83.716586) (xy 131.76985 83.602009) + (xy 131.76985 83.483391) (xy 131.739149 83.368814) (xy 131.739147 83.368811) (xy 131.739147 83.368809) + (xy 131.679842 83.266091) (xy 131.67984 83.266089) (xy 131.679839 83.266087) (xy 131.595963 83.182211) + (xy 131.59596 83.182209) (xy 131.595958 83.182207) (xy 131.493239 83.122902) (xy 131.49324 83.122902) + (xy 131.451116 83.111615) (xy 131.378659 83.0922) (xy 131.260041 83.0922) (xy 131.213932 83.104555) + (xy 131.145459 83.122902) (xy 131.042741 83.182207) (xy 130.958857 83.266091) (xy 130.899552 83.368809) + (xy 130.899551 83.368814) (xy 130.86885 83.483391) (xy 80.805045 83.483391) (xy 80.805039 83.477002) + (xy 80.804297 82.743791) (xy 97.40115 82.743791) (xy 97.40115 82.862409) (xy 97.412403 82.904405) + (xy 97.431852 82.97699) (xy 97.491157 83.079708) (xy 97.491159 83.07971) (xy 97.491161 83.079713) + (xy 97.575037 83.163589) (xy 97.575039 83.16359) (xy 97.575041 83.163592) (xy 97.67776 83.222897) + (xy 97.677761 83.222897) (xy 97.677764 83.222899) (xy 97.792341 83.2536) (xy 97.792343 83.2536) + (xy 97.910957 83.2536) (xy 97.910959 83.2536) (xy 98.025536 83.222899) (xy 98.025538 83.222897) + (xy 98.02554 83.222897) (xy 98.128258 83.163592) (xy 98.128258 83.163591) (xy 98.128263 83.163589) + (xy 98.212139 83.079713) (xy 98.218089 83.069407) (xy 98.271447 82.97699) (xy 98.271447 82.976988) + (xy 98.271449 82.976986) (xy 98.30215 82.862409) (xy 98.30215 82.743791) (xy 98.271449 82.629214) + (xy 98.271447 82.629211) (xy 98.271447 82.629209) (xy 98.212142 82.526491) (xy 98.21214 82.526489) + (xy 98.212139 82.526487) (xy 98.128263 82.442611) (xy 98.12826 82.442609) (xy 98.128258 82.442607) + (xy 98.025539 82.383302) (xy 98.02554 82.383302) (xy 98.012001 82.379674) (xy 97.910959 82.3526) + (xy 97.792341 82.3526) (xy 97.734088 82.368209) (xy 97.677759 82.383302) (xy 97.575041 82.442607) + (xy 97.491157 82.526491) (xy 97.431852 82.629209) (xy 97.431851 82.629214) (xy 97.40115 82.743791) + (xy 80.804297 82.743791) (xy 80.804291 82.737402) (xy 80.802766 81.229481) (xy 105.16115 81.229481) + (xy 105.16115 81.416718) (xy 105.197676 81.600349) (xy 105.269327 81.773329) (xy 105.269331 81.773338) + (xy 105.325965 81.858095) (xy 105.373348 81.929008) (xy 105.505742 82.061402) (xy 105.572113 82.105749) + (xy 105.661411 82.165418) (xy 105.661417 82.16542) (xy 105.661419 82.165422) (xy 105.834399 82.237073) + (xy 106.018034 82.2736) (xy 106.018035 82.2736) (xy 106.205265 82.2736) (xy 106.205266 82.2736) + (xy 106.325968 82.249591) (xy 107.20395 82.249591) (xy 107.20395 82.368209) (xy 107.221064 82.432079) + (xy 107.234652 82.48279) (xy 107.293957 82.585508) (xy 107.293959 82.58551) (xy 107.293961 82.585513) + (xy 107.377837 82.669389) (xy 107.377839 82.66939) (xy 107.377841 82.669392) (xy 107.48056 82.728697) + (xy 107.480561 82.728697) (xy 107.480564 82.728699) (xy 107.595141 82.7594) (xy 107.595143 82.7594) + (xy 107.713757 82.7594) (xy 107.713759 82.7594) (xy 107.828336 82.728699) (xy 107.828338 82.728697) + (xy 107.82834 82.728697) (xy 107.931058 82.669392) (xy 107.931058 82.669391) (xy 107.931063 82.669389) + (xy 108.014939 82.585513) (xy 108.035731 82.5495) (xy 108.074247 82.48279) (xy 108.074247 82.482788) + (xy 108.074249 82.482786) (xy 108.10495 82.368209) (xy 108.10495 82.273627) (xy 108.123857 82.215436) + (xy 108.173357 82.179472) (xy 108.234543 82.179472) (xy 108.241828 82.18216) (xy 108.374399 82.237073) + (xy 108.558034 82.2736) (xy 108.558035 82.2736) (xy 108.745265 82.2736) (xy 108.745266 82.2736) + (xy 108.928901 82.237073) (xy 109.101881 82.165422) (xy 109.101884 82.165419) (xy 109.101888 82.165418) + (xy 109.147397 82.135009) (xy 109.257558 82.061402) (xy 109.389952 81.929008) (xy 109.483486 81.789025) + (xy 109.493968 81.773338) (xy 109.493969 81.773334) (xy 109.493972 81.773331) (xy 109.565623 81.600351) + (xy 109.60215 81.416716) (xy 109.60215 81.229484) (xy 109.602149 81.229481) (xy 110.24115 81.229481) + (xy 110.24115 81.416718) (xy 110.277676 81.600349) (xy 110.349327 81.773329) (xy 110.349331 81.773338) + (xy 110.405965 81.858095) (xy 110.453348 81.929008) (xy 110.585742 82.061402) (xy 110.652113 82.105749) + (xy 110.741411 82.165418) (xy 110.741417 82.16542) (xy 110.741419 82.165422) (xy 110.914399 82.237073) + (xy 111.098034 82.2736) (xy 111.098035 82.2736) (xy 111.285265 82.2736) (xy 111.285266 82.2736) + (xy 111.468901 82.237073) (xy 111.641881 82.165422) (xy 111.641884 82.165419) (xy 111.641888 82.165418) + (xy 111.687397 82.135009) (xy 111.797558 82.061402) (xy 111.929952 81.929008) (xy 112.023486 81.789025) + (xy 112.033968 81.773338) (xy 112.033969 81.773334) (xy 112.033972 81.773331) (xy 112.105623 81.600351) + (xy 112.14215 81.416716) (xy 112.14215 81.229484) (xy 112.111043 81.073099) (xy 112.45504 81.073099) + (xy 112.455041 81.0731) (xy 113.298638 81.0731) (xy 113.265725 81.130107) (xy 113.23165 81.257274) + (xy 113.23165 81.388926) (xy 113.265725 81.516093) (xy 113.298638 81.5731) (xy 112.45504 81.5731) + (xy 112.463659 81.627514) (xy 112.526893 81.822127) (xy 112.619788 82.004446) (xy 112.740064 82.169991) (xy 112.884758 82.314685) (xy 113.050303 82.434961) (xy 113.232622 82.527856) (xy 113.427239 82.591091) (xy 113.427235 82.591091) (xy 113.481649 82.599708) (xy 113.48165 82.599707) (xy 113.48165 81.756112) (xy 113.538657 81.789025) (xy 113.665824 81.8231) (xy 113.797476 81.8231) (xy 113.924643 81.789025) (xy 113.98165 81.756112) (xy 113.98165 82.599708) (xy 114.036062 82.591091) (xy 114.230677 82.527856) (xy 114.412996 82.434961) (xy 114.578541 82.314685) (xy 114.723235 82.169991) (xy 114.843511 82.004446) - (xy 114.936406 81.822127) (xy 114.999641 81.627511) (xy 115.005192 81.592464) (xy 115.032968 81.537947) - (xy 115.087484 81.510168) (xy 115.147917 81.519739) (xy 115.191182 81.563002) (xy 115.197127 81.577356) - (xy 115.251773 81.745538) (xy 115.251775 81.745541) (xy 115.324052 81.887395) (xy 115.330418 81.899888) - (xy 115.432236 82.040028) (xy 115.554722 82.162514) (xy 115.694862 82.264332) (xy 115.849205 82.342973) - (xy 115.849207 82.342973) (xy 115.849208 82.342974) (xy 115.849211 82.342976) (xy 116.013943 82.396501) - (xy 116.013947 82.396502) (xy 116.185036 82.4236) (xy 116.185039 82.4236) (xy 116.358264 82.4236) - (xy 116.529352 82.396502) (xy 116.529356 82.396501) (xy 116.694088 82.342976) (xy 116.69409 82.342974) - (xy 116.694095 82.342973) (xy 116.848438 82.264332) (xy 116.988578 82.162514) (xy 117.111064 82.040028) - (xy 117.212882 81.899888) (xy 117.291523 81.745545) (xy 117.291524 81.74554) (xy 117.291526 81.745538) - (xy 117.345051 81.580806) (xy 117.345052 81.580802) (xy 117.37215 81.409714) (xy 117.37215 81.236485) - (xy 117.71115 81.236485) (xy 117.71115 81.409714) (xy 117.738247 81.580802) (xy 117.738248 81.580806) - (xy 117.791773 81.745538) (xy 117.791775 81.745541) (xy 117.864052 81.887395) (xy 117.870418 81.899888) - (xy 117.972236 82.040028) (xy 118.094722 82.162514) (xy 118.234862 82.264332) (xy 118.389205 82.342973) - (xy 118.389207 82.342973) (xy 118.389208 82.342974) (xy 118.389211 82.342976) (xy 118.553943 82.396501) - (xy 118.553947 82.396502) (xy 118.725036 82.4236) (xy 118.725039 82.4236) (xy 118.898264 82.4236) - (xy 119.069352 82.396502) (xy 119.069356 82.396501) (xy 119.234088 82.342976) (xy 119.23409 82.342974) - (xy 119.234095 82.342973) (xy 119.388438 82.264332) (xy 119.528578 82.162514) (xy 119.651064 82.040028) - (xy 119.752882 81.899888) (xy 119.831523 81.745545) (xy 119.831524 81.74554) (xy 119.831526 81.745538) - (xy 119.885051 81.580806) (xy 119.885052 81.580802) (xy 119.91215 81.409714) (xy 119.91215 81.236485) - (xy 120.25115 81.236485) (xy 120.25115 81.409714) (xy 120.278247 81.580802) (xy 120.278248 81.580806) - (xy 120.331773 81.745538) (xy 120.331775 81.745541) (xy 120.404052 81.887395) (xy 120.410418 81.899888) - (xy 120.512236 82.040028) (xy 120.634722 82.162514) (xy 120.774862 82.264332) (xy 120.929205 82.342973) - (xy 120.929207 82.342973) (xy 120.929208 82.342974) (xy 120.929211 82.342976) (xy 121.093943 82.396501) - (xy 121.093947 82.396502) (xy 121.265036 82.4236) (xy 121.265039 82.4236) (xy 121.438264 82.4236) - (xy 121.609352 82.396502) (xy 121.609356 82.396501) (xy 121.774088 82.342976) (xy 121.77409 82.342974) - (xy 121.774095 82.342973) (xy 121.928438 82.264332) (xy 122.068578 82.162514) (xy 122.191064 82.040028) - (xy 122.292882 81.899888) (xy 122.371523 81.745545) (xy 122.371524 81.74554) (xy 122.371526 81.745538) - (xy 122.425051 81.580806) (xy 122.425052 81.580802) (xy 122.45215 81.409714) (xy 122.45215 81.236485) - (xy 122.79115 81.236485) (xy 122.79115 81.409714) (xy 122.818247 81.580802) (xy 122.818248 81.580806) - (xy 122.871773 81.745538) (xy 122.871775 81.745541) (xy 122.944052 81.887395) (xy 122.950418 81.899888) - (xy 123.052236 82.040028) (xy 123.174722 82.162514) (xy 123.314862 82.264332) (xy 123.469205 82.342973) - (xy 123.469207 82.342973) (xy 123.469208 82.342974) (xy 123.469211 82.342976) (xy 123.633943 82.396501) - (xy 123.633947 82.396502) (xy 123.805036 82.4236) (xy 123.805039 82.4236) (xy 123.978264 82.4236) - (xy 124.149352 82.396502) (xy 124.149356 82.396501) (xy 124.314088 82.342976) (xy 124.31409 82.342974) - (xy 124.314095 82.342973) (xy 124.468438 82.264332) (xy 124.608578 82.162514) (xy 124.731064 82.040028) - (xy 124.832882 81.899888) (xy 124.911523 81.745545) (xy 124.911524 81.74554) (xy 124.911526 81.745538) - (xy 124.965051 81.580806) (xy 124.965052 81.580802) (xy 124.99215 81.409714) (xy 124.99215 81.236485) - (xy 125.33115 81.236485) (xy 125.33115 81.409714) (xy 125.358247 81.580802) (xy 125.358248 81.580806) - (xy 125.411773 81.745538) (xy 125.411775 81.745541) (xy 125.484052 81.887395) (xy 125.490418 81.899888) - (xy 125.592236 82.040028) (xy 125.714722 82.162514) (xy 125.854862 82.264332) (xy 126.009205 82.342973) - (xy 126.009207 82.342973) (xy 126.009208 82.342974) (xy 126.009211 82.342976) (xy 126.173943 82.396501) - (xy 126.173947 82.396502) (xy 126.345036 82.4236) (xy 126.345039 82.4236) (xy 126.518264 82.4236) - (xy 126.689352 82.396502) (xy 126.689356 82.396501) (xy 126.854088 82.342976) (xy 126.85409 82.342974) - (xy 126.854095 82.342973) (xy 127.008438 82.264332) (xy 127.148578 82.162514) (xy 127.271064 82.040028) - (xy 127.372882 81.899888) (xy 127.451523 81.745545) (xy 127.451524 81.74554) (xy 127.451526 81.745538) - (xy 127.505051 81.580806) (xy 127.505052 81.580802) (xy 127.53215 81.409714) (xy 127.53215 81.236485) - (xy 127.87115 81.236485) (xy 127.87115 81.409714) (xy 127.898247 81.580802) (xy 127.898248 81.580806) - (xy 127.951773 81.745538) (xy 127.951775 81.745541) (xy 128.024052 81.887395) (xy 128.030418 81.899888) - (xy 128.132236 82.040028) (xy 128.254722 82.162514) (xy 128.394862 82.264332) (xy 128.549205 82.342973) - (xy 128.549207 82.342973) (xy 128.549208 82.342974) (xy 128.549211 82.342976) (xy 128.713943 82.396501) - (xy 128.713947 82.396502) (xy 128.885036 82.4236) (xy 128.885039 82.4236) (xy 129.058264 82.4236) - (xy 129.229352 82.396502) (xy 129.229356 82.396501) (xy 129.394088 82.342976) (xy 129.39409 82.342974) - (xy 129.394095 82.342973) (xy 129.548438 82.264332) (xy 129.688578 82.162514) (xy 129.811064 82.040028) - (xy 129.912882 81.899888) (xy 129.991523 81.745545) (xy 129.991524 81.74554) (xy 129.991526 81.745538) - (xy 130.045051 81.580806) (xy 130.045052 81.580802) (xy 130.07215 81.409714) (xy 130.07215 81.236485) - (xy 131.93115 81.236485) (xy 131.93115 81.409714) (xy 131.958247 81.580802) (xy 131.958248 81.580806) - (xy 132.011773 81.745538) (xy 132.011775 81.745541) (xy 132.084052 81.887395) (xy 132.090418 81.899888) - (xy 132.192236 82.040028) (xy 132.314722 82.162514) (xy 132.454862 82.264332) (xy 132.609205 82.342973) - (xy 132.609207 82.342973) (xy 132.609208 82.342974) (xy 132.609211 82.342976) (xy 132.773943 82.396501) - (xy 132.773947 82.396502) (xy 132.945036 82.4236) (xy 132.945039 82.4236) (xy 133.118264 82.4236) - (xy 133.289352 82.396502) (xy 133.289356 82.396501) (xy 133.454088 82.342976) (xy 133.45409 82.342974) - (xy 133.454095 82.342973) (xy 133.608438 82.264332) (xy 133.748578 82.162514) (xy 133.871064 82.040028) - (xy 133.972882 81.899888) (xy 134.051523 81.745545) (xy 134.051524 81.74554) (xy 134.051526 81.745538) - (xy 134.105051 81.580806) (xy 134.105052 81.580802) (xy 134.13215 81.409714) (xy 134.13215 81.236485) - (xy 134.47115 81.236485) (xy 134.47115 81.409714) (xy 134.498247 81.580802) (xy 134.498248 81.580806) - (xy 134.551773 81.745538) (xy 134.551775 81.745541) (xy 134.624052 81.887395) (xy 134.630418 81.899888) - (xy 134.732236 82.040028) (xy 134.854722 82.162514) (xy 134.994862 82.264332) (xy 135.149205 82.342973) - (xy 135.149207 82.342973) (xy 135.149208 82.342974) (xy 135.149211 82.342976) (xy 135.313943 82.396501) - (xy 135.313947 82.396502) (xy 135.485036 82.4236) (xy 135.485039 82.4236) (xy 135.658264 82.4236) - (xy 135.829352 82.396502) (xy 135.829356 82.396501) (xy 135.994088 82.342976) (xy 135.99409 82.342974) - (xy 135.994095 82.342973) (xy 136.148438 82.264332) (xy 136.288578 82.162514) (xy 136.411064 82.040028) - (xy 136.512882 81.899888) (xy 136.591523 81.745545) (xy 136.591524 81.74554) (xy 136.591526 81.745538) - (xy 136.645051 81.580806) (xy 136.645052 81.580802) (xy 136.67215 81.409714) (xy 136.67215 81.236485) - (xy 137.01115 81.236485) (xy 137.01115 81.409714) (xy 137.038247 81.580802) (xy 137.038248 81.580806) - (xy 137.091773 81.745538) (xy 137.091775 81.745541) (xy 137.164052 81.887395) (xy 137.170418 81.899888) - (xy 137.272236 82.040028) (xy 137.394722 82.162514) (xy 137.534862 82.264332) (xy 137.689205 82.342973) - (xy 137.689207 82.342973) (xy 137.689208 82.342974) (xy 137.689211 82.342976) (xy 137.853943 82.396501) - (xy 137.853947 82.396502) (xy 138.025036 82.4236) (xy 138.025039 82.4236) (xy 138.198264 82.4236) - (xy 138.369352 82.396502) (xy 138.369356 82.396501) (xy 138.534088 82.342976) (xy 138.53409 82.342974) - (xy 138.534095 82.342973) (xy 138.688438 82.264332) (xy 138.828578 82.162514) (xy 138.951064 82.040028) - (xy 139.052882 81.899888) (xy 139.131523 81.745545) (xy 139.131524 81.74554) (xy 139.131526 81.745538) - (xy 139.185051 81.580806) (xy 139.185052 81.580802) (xy 139.21215 81.409714) (xy 139.21215 81.236485) - (xy 139.55115 81.236485) (xy 139.55115 81.409714) (xy 139.578247 81.580802) (xy 139.578248 81.580806) - (xy 139.631773 81.745538) (xy 139.631775 81.745541) (xy 139.704052 81.887395) (xy 139.710418 81.899888) - (xy 139.812236 82.040028) (xy 139.934722 82.162514) (xy 140.074862 82.264332) (xy 140.229205 82.342973) - (xy 140.229207 82.342973) (xy 140.229208 82.342974) (xy 140.229211 82.342976) (xy 140.393943 82.396501) - (xy 140.393947 82.396502) (xy 140.565036 82.4236) (xy 140.565039 82.4236) (xy 140.738264 82.4236) - (xy 140.909352 82.396502) (xy 140.909356 82.396501) (xy 141.074088 82.342976) (xy 141.07409 82.342974) - (xy 141.074095 82.342973) (xy 141.228438 82.264332) (xy 141.368578 82.162514) (xy 141.491064 82.040028) - (xy 141.592882 81.899888) (xy 141.671523 81.745545) (xy 141.671524 81.74554) (xy 141.671526 81.745538) - (xy 141.725051 81.580806) (xy 141.725052 81.580802) (xy 141.75215 81.409714) (xy 141.75215 81.236485) - (xy 142.09115 81.236485) (xy 142.09115 81.409714) (xy 142.118247 81.580802) (xy 142.118248 81.580806) - (xy 142.171773 81.745538) (xy 142.171775 81.745541) (xy 142.244052 81.887395) (xy 142.250418 81.899888) - (xy 142.352236 82.040028) (xy 142.474722 82.162514) (xy 142.614862 82.264332) (xy 142.769205 82.342973) - (xy 142.769207 82.342973) (xy 142.769208 82.342974) (xy 142.769211 82.342976) (xy 142.933943 82.396501) - (xy 142.933947 82.396502) (xy 143.105036 82.4236) (xy 143.105039 82.4236) (xy 143.278264 82.4236) - (xy 143.449352 82.396502) (xy 143.449356 82.396501) (xy 143.614088 82.342976) (xy 143.61409 82.342974) - (xy 143.614095 82.342973) (xy 143.768438 82.264332) (xy 143.908578 82.162514) (xy 144.031064 82.040028) - (xy 144.132882 81.899888) (xy 144.211523 81.745545) (xy 144.211524 81.74554) (xy 144.211526 81.745538) - (xy 144.265051 81.580806) (xy 144.265052 81.580802) (xy 144.29215 81.409714) (xy 144.29215 81.236485) - (xy 144.63115 81.236485) (xy 144.63115 81.409714) (xy 144.658247 81.580802) (xy 144.658248 81.580806) - (xy 144.711773 81.745538) (xy 144.711775 81.745541) (xy 144.784052 81.887395) (xy 144.790418 81.899888) - (xy 144.892236 82.040028) (xy 145.014722 82.162514) (xy 145.154862 82.264332) (xy 145.309205 82.342973) - (xy 145.309207 82.342973) (xy 145.309208 82.342974) (xy 145.309211 82.342976) (xy 145.473943 82.396501) - (xy 145.473947 82.396502) (xy 145.645036 82.4236) (xy 145.645039 82.4236) (xy 145.818264 82.4236) - (xy 145.989352 82.396502) (xy 145.989356 82.396501) (xy 146.154088 82.342976) (xy 146.15409 82.342974) - (xy 146.154095 82.342973) (xy 146.308438 82.264332) (xy 146.448578 82.162514) (xy 146.571064 82.040028) - (xy 146.672882 81.899888) (xy 146.751523 81.745545) (xy 146.751524 81.74554) (xy 146.751526 81.745538) - (xy 146.805051 81.580806) (xy 146.805052 81.580802) (xy 146.83215 81.409714) (xy 146.83215 81.236485) - (xy 147.17115 81.236485) (xy 147.17115 81.409714) (xy 147.198247 81.580802) (xy 147.198248 81.580806) - (xy 147.251773 81.745538) (xy 147.251775 81.745541) (xy 147.324052 81.887395) (xy 147.330418 81.899888) - (xy 147.432236 82.040028) (xy 147.554722 82.162514) (xy 147.694862 82.264332) (xy 147.849205 82.342973) - (xy 147.849207 82.342973) (xy 147.849208 82.342974) (xy 147.849211 82.342976) (xy 148.013943 82.396501) - (xy 148.013947 82.396502) (xy 148.185036 82.4236) (xy 148.185039 82.4236) (xy 148.358264 82.4236) - (xy 148.529352 82.396502) (xy 148.529356 82.396501) (xy 148.694088 82.342976) (xy 148.69409 82.342974) - (xy 148.694095 82.342973) (xy 148.848438 82.264332) (xy 148.988578 82.162514) (xy 149.111064 82.040028) - (xy 149.212882 81.899888) (xy 149.291523 81.745545) (xy 149.291524 81.74554) (xy 149.291526 81.745538) - (xy 149.345051 81.580806) (xy 149.345052 81.580802) (xy 149.37215 81.409714) (xy 149.37215 81.236485) - (xy 149.71115 81.236485) (xy 149.71115 81.409714) (xy 149.738247 81.580802) (xy 149.738248 81.580806) - (xy 149.791773 81.745538) (xy 149.791775 81.745541) (xy 149.864052 81.887395) (xy 149.870418 81.899888) - (xy 149.972236 82.040028) (xy 150.094722 82.162514) (xy 150.234862 82.264332) (xy 150.389205 82.342973) - (xy 150.389207 82.342973) (xy 150.389208 82.342974) (xy 150.389211 82.342976) (xy 150.553943 82.396501) - (xy 150.553947 82.396502) (xy 150.725036 82.4236) (xy 150.725039 82.4236) (xy 150.898264 82.4236) - (xy 151.069352 82.396502) (xy 151.069356 82.396501) (xy 151.234088 82.342976) (xy 151.23409 82.342974) - (xy 151.234095 82.342973) (xy 151.388438 82.264332) (xy 151.528578 82.162514) (xy 151.651064 82.040028) - (xy 151.752882 81.899888) (xy 151.831523 81.745545) (xy 151.831524 81.74554) (xy 151.831526 81.745538) - (xy 151.885051 81.580806) (xy 151.885052 81.580802) (xy 151.91215 81.409714) (xy 151.91215 81.236485) - (xy 151.885052 81.065397) (xy 151.885051 81.065393) (xy 151.831526 80.900661) (xy 151.831524 80.900658) - (xy 151.831523 80.900657) (xy 151.831523 80.900655) (xy 151.752882 80.746312) (xy 151.651064 80.606172) - (xy 151.528578 80.483686) (xy 151.388438 80.381868) (xy 151.388437 80.381867) (xy 151.388435 80.381866) - (xy 151.234091 80.303225) (xy 151.234088 80.303223) (xy 151.069356 80.249698) (xy 151.069352 80.249697) - (xy 150.898264 80.2226) (xy 150.898261 80.2226) (xy 150.725039 80.2226) (xy 150.725036 80.2226) - (xy 150.553947 80.249697) (xy 150.553943 80.249698) (xy 150.389211 80.303223) (xy 150.389208 80.303225) - (xy 150.234864 80.381866) (xy 150.094723 80.483685) (xy 149.972235 80.606173) (xy 149.870416 80.746314) - (xy 149.791775 80.900658) (xy 149.791773 80.900661) (xy 149.738248 81.065393) (xy 149.738247 81.065397) - (xy 149.71115 81.236485) (xy 149.37215 81.236485) (xy 149.345052 81.065397) (xy 149.345051 81.065393) - (xy 149.291526 80.900661) (xy 149.291524 80.900658) (xy 149.291523 80.900657) (xy 149.291523 80.900655) - (xy 149.212882 80.746312) (xy 149.111064 80.606172) (xy 148.988578 80.483686) (xy 148.848438 80.381868) - (xy 148.848437 80.381867) (xy 148.848435 80.381866) (xy 148.694091 80.303225) (xy 148.694088 80.303223) - (xy 148.529356 80.249698) (xy 148.529352 80.249697) (xy 148.358264 80.2226) (xy 148.358261 80.2226) - (xy 148.185039 80.2226) (xy 148.185036 80.2226) (xy 148.013947 80.249697) (xy 148.013943 80.249698) - (xy 147.849211 80.303223) (xy 147.849208 80.303225) (xy 147.694864 80.381866) (xy 147.554723 80.483685) - (xy 147.432235 80.606173) (xy 147.330416 80.746314) (xy 147.251775 80.900658) (xy 147.251773 80.900661) - (xy 147.198248 81.065393) (xy 147.198247 81.065397) (xy 147.17115 81.236485) (xy 146.83215 81.236485) - (xy 146.805052 81.065397) (xy 146.805051 81.065393) (xy 146.751526 80.900661) (xy 146.751524 80.900658) - (xy 146.751523 80.900657) (xy 146.751523 80.900655) (xy 146.672882 80.746312) (xy 146.571064 80.606172) - (xy 146.448578 80.483686) (xy 146.308438 80.381868) (xy 146.308437 80.381867) (xy 146.308435 80.381866) - (xy 146.154091 80.303225) (xy 146.154088 80.303223) (xy 145.989356 80.249698) (xy 145.989352 80.249697) - (xy 145.818264 80.2226) (xy 145.818261 80.2226) (xy 145.645039 80.2226) (xy 145.645036 80.2226) - (xy 145.473947 80.249697) (xy 145.473943 80.249698) (xy 145.309211 80.303223) (xy 145.309208 80.303225) - (xy 145.154864 80.381866) (xy 145.014723 80.483685) (xy 144.892235 80.606173) (xy 144.790416 80.746314) - (xy 144.711775 80.900658) (xy 144.711773 80.900661) (xy 144.658248 81.065393) (xy 144.658247 81.065397) - (xy 144.63115 81.236485) (xy 144.29215 81.236485) (xy 144.265052 81.065397) (xy 144.265051 81.065393) - (xy 144.211526 80.900661) (xy 144.211524 80.900658) (xy 144.211523 80.900657) (xy 144.211523 80.900655) - (xy 144.132882 80.746312) (xy 144.031064 80.606172) (xy 143.908578 80.483686) (xy 143.768438 80.381868) - (xy 143.768437 80.381867) (xy 143.768435 80.381866) (xy 143.614091 80.303225) (xy 143.614088 80.303223) - (xy 143.449356 80.249698) (xy 143.449352 80.249697) (xy 143.278264 80.2226) (xy 143.278261 80.2226) - (xy 143.105039 80.2226) (xy 143.105036 80.2226) (xy 142.933947 80.249697) (xy 142.933943 80.249698) - (xy 142.769211 80.303223) (xy 142.769208 80.303225) (xy 142.614864 80.381866) (xy 142.474723 80.483685) - (xy 142.352235 80.606173) (xy 142.250416 80.746314) (xy 142.171775 80.900658) (xy 142.171773 80.900661) - (xy 142.118248 81.065393) (xy 142.118247 81.065397) (xy 142.09115 81.236485) (xy 141.75215 81.236485) - (xy 141.725052 81.065397) (xy 141.725051 81.065393) (xy 141.671526 80.900661) (xy 141.671524 80.900658) - (xy 141.671523 80.900657) (xy 141.671523 80.900655) (xy 141.592882 80.746312) (xy 141.491064 80.606172) - (xy 141.368578 80.483686) (xy 141.228438 80.381868) (xy 141.228437 80.381867) (xy 141.228435 80.381866) - (xy 141.074091 80.303225) (xy 141.074088 80.303223) (xy 140.909356 80.249698) (xy 140.909352 80.249697) - (xy 140.738264 80.2226) (xy 140.738261 80.2226) (xy 140.565039 80.2226) (xy 140.565036 80.2226) - (xy 140.393947 80.249697) (xy 140.393943 80.249698) (xy 140.229211 80.303223) (xy 140.229208 80.303225) - (xy 140.074864 80.381866) (xy 139.934723 80.483685) (xy 139.812235 80.606173) (xy 139.710416 80.746314) - (xy 139.631775 80.900658) (xy 139.631773 80.900661) (xy 139.578248 81.065393) (xy 139.578247 81.065397) - (xy 139.55115 81.236485) (xy 139.21215 81.236485) (xy 139.185052 81.065397) (xy 139.185051 81.065393) - (xy 139.131526 80.900661) (xy 139.131524 80.900658) (xy 139.131523 80.900657) (xy 139.131523 80.900655) - (xy 139.052882 80.746312) (xy 138.951064 80.606172) (xy 138.828578 80.483686) (xy 138.688438 80.381868) - (xy 138.688437 80.381867) (xy 138.688435 80.381866) (xy 138.534091 80.303225) (xy 138.534088 80.303223) - (xy 138.369356 80.249698) (xy 138.369352 80.249697) (xy 138.198264 80.2226) (xy 138.198261 80.2226) - (xy 138.025039 80.2226) (xy 138.025036 80.2226) (xy 137.853947 80.249697) (xy 137.853943 80.249698) - (xy 137.689211 80.303223) (xy 137.689208 80.303225) (xy 137.534864 80.381866) (xy 137.394723 80.483685) - (xy 137.272235 80.606173) (xy 137.170416 80.746314) (xy 137.091775 80.900658) (xy 137.091773 80.900661) - (xy 137.038248 81.065393) (xy 137.038247 81.065397) (xy 137.01115 81.236485) (xy 136.67215 81.236485) - (xy 136.645052 81.065397) (xy 136.645051 81.065393) (xy 136.591526 80.900661) (xy 136.591524 80.900658) - (xy 136.591523 80.900657) (xy 136.591523 80.900655) (xy 136.512882 80.746312) (xy 136.411064 80.606172) - (xy 136.288578 80.483686) (xy 136.148438 80.381868) (xy 136.148437 80.381867) (xy 136.148435 80.381866) - (xy 135.994091 80.303225) (xy 135.994088 80.303223) (xy 135.829356 80.249698) (xy 135.829352 80.249697) - (xy 135.658264 80.2226) (xy 135.658261 80.2226) (xy 135.485039 80.2226) (xy 135.485036 80.2226) - (xy 135.313947 80.249697) (xy 135.313943 80.249698) (xy 135.149211 80.303223) (xy 135.149208 80.303225) - (xy 134.994864 80.381866) (xy 134.854723 80.483685) (xy 134.732235 80.606173) (xy 134.630416 80.746314) - (xy 134.551775 80.900658) (xy 134.551773 80.900661) (xy 134.498248 81.065393) (xy 134.498247 81.065397) - (xy 134.47115 81.236485) (xy 134.13215 81.236485) (xy 134.105052 81.065397) (xy 134.105051 81.065393) - (xy 134.051526 80.900661) (xy 134.051524 80.900658) (xy 134.051523 80.900657) (xy 134.051523 80.900655) - (xy 133.972882 80.746312) (xy 133.871064 80.606172) (xy 133.748578 80.483686) (xy 133.608438 80.381868) - (xy 133.608437 80.381867) (xy 133.608435 80.381866) (xy 133.454091 80.303225) (xy 133.454088 80.303223) - (xy 133.289356 80.249698) (xy 133.289352 80.249697) (xy 133.118264 80.2226) (xy 133.118261 80.2226) - (xy 132.945039 80.2226) (xy 132.945036 80.2226) (xy 132.773947 80.249697) (xy 132.773943 80.249698) - (xy 132.609211 80.303223) (xy 132.609208 80.303225) (xy 132.454864 80.381866) (xy 132.314723 80.483685) - (xy 132.192235 80.606173) (xy 132.090416 80.746314) (xy 132.011775 80.900658) (xy 132.011773 80.900661) - (xy 131.958248 81.065393) (xy 131.958247 81.065397) (xy 131.93115 81.236485) (xy 130.07215 81.236485) - (xy 130.045052 81.065397) (xy 130.045051 81.065393) (xy 129.991526 80.900661) (xy 129.991524 80.900658) - (xy 129.991523 80.900657) (xy 129.991523 80.900655) (xy 129.912882 80.746312) (xy 129.811064 80.606172) - (xy 129.688578 80.483686) (xy 129.548438 80.381868) (xy 129.548437 80.381867) (xy 129.548435 80.381866) - (xy 129.394091 80.303225) (xy 129.394088 80.303223) (xy 129.229356 80.249698) (xy 129.229352 80.249697) - (xy 129.058264 80.2226) (xy 129.058261 80.2226) (xy 128.885039 80.2226) (xy 128.885036 80.2226) - (xy 128.713947 80.249697) (xy 128.713943 80.249698) (xy 128.549211 80.303223) (xy 128.549208 80.303225) - (xy 128.394864 80.381866) (xy 128.254723 80.483685) (xy 128.132235 80.606173) (xy 128.030416 80.746314) - (xy 127.951775 80.900658) (xy 127.951773 80.900661) (xy 127.898248 81.065393) (xy 127.898247 81.065397) - (xy 127.87115 81.236485) (xy 127.53215 81.236485) (xy 127.505052 81.065397) (xy 127.505051 81.065393) - (xy 127.451526 80.900661) (xy 127.451524 80.900658) (xy 127.451523 80.900657) (xy 127.451523 80.900655) - (xy 127.372882 80.746312) (xy 127.271064 80.606172) (xy 127.148578 80.483686) (xy 127.008438 80.381868) - (xy 127.008437 80.381867) (xy 127.008435 80.381866) (xy 126.854091 80.303225) (xy 126.854088 80.303223) - (xy 126.689356 80.249698) (xy 126.689352 80.249697) (xy 126.518264 80.2226) (xy 126.518261 80.2226) - (xy 126.345039 80.2226) (xy 126.345036 80.2226) (xy 126.173947 80.249697) (xy 126.173943 80.249698) - (xy 126.009211 80.303223) (xy 126.009208 80.303225) (xy 125.854864 80.381866) (xy 125.714723 80.483685) - (xy 125.592235 80.606173) (xy 125.490416 80.746314) (xy 125.411775 80.900658) (xy 125.411773 80.900661) - (xy 125.358248 81.065393) (xy 125.358247 81.065397) (xy 125.33115 81.236485) (xy 124.99215 81.236485) - (xy 124.965052 81.065397) (xy 124.965051 81.065393) (xy 124.911526 80.900661) (xy 124.911524 80.900658) - (xy 124.911523 80.900657) (xy 124.911523 80.900655) (xy 124.832882 80.746312) (xy 124.731064 80.606172) - (xy 124.608578 80.483686) (xy 124.468438 80.381868) (xy 124.468437 80.381867) (xy 124.468435 80.381866) - (xy 124.314091 80.303225) (xy 124.314088 80.303223) (xy 124.149356 80.249698) (xy 124.149352 80.249697) - (xy 123.978264 80.2226) (xy 123.978261 80.2226) (xy 123.805039 80.2226) (xy 123.805036 80.2226) - (xy 123.633947 80.249697) (xy 123.633943 80.249698) (xy 123.469211 80.303223) (xy 123.469208 80.303225) - (xy 123.314864 80.381866) (xy 123.174723 80.483685) (xy 123.052235 80.606173) (xy 122.950416 80.746314) - (xy 122.871775 80.900658) (xy 122.871773 80.900661) (xy 122.818248 81.065393) (xy 122.818247 81.065397) - (xy 122.79115 81.236485) (xy 122.45215 81.236485) (xy 122.425052 81.065397) (xy 122.425051 81.065393) - (xy 122.371526 80.900661) (xy 122.371524 80.900658) (xy 122.371523 80.900657) (xy 122.371523 80.900655) - (xy 122.292882 80.746312) (xy 122.191064 80.606172) (xy 122.068578 80.483686) (xy 121.928438 80.381868) - (xy 121.928437 80.381867) (xy 121.928435 80.381866) (xy 121.774091 80.303225) (xy 121.774088 80.303223) - (xy 121.609356 80.249698) (xy 121.609352 80.249697) (xy 121.438264 80.2226) (xy 121.438261 80.2226) - (xy 121.265039 80.2226) (xy 121.265036 80.2226) (xy 121.093947 80.249697) (xy 121.093943 80.249698) - (xy 120.929211 80.303223) (xy 120.929208 80.303225) (xy 120.774864 80.381866) (xy 120.634723 80.483685) - (xy 120.512235 80.606173) (xy 120.410416 80.746314) (xy 120.331775 80.900658) (xy 120.331773 80.900661) - (xy 120.278248 81.065393) (xy 120.278247 81.065397) (xy 120.25115 81.236485) (xy 119.91215 81.236485) - (xy 119.885052 81.065397) (xy 119.885051 81.065393) (xy 119.831526 80.900661) (xy 119.831524 80.900658) - (xy 119.831523 80.900657) (xy 119.831523 80.900655) (xy 119.752882 80.746312) (xy 119.651064 80.606172) - (xy 119.528578 80.483686) (xy 119.388438 80.381868) (xy 119.388437 80.381867) (xy 119.388435 80.381866) - (xy 119.234091 80.303225) (xy 119.234088 80.303223) (xy 119.069356 80.249698) (xy 119.069352 80.249697) - (xy 118.898264 80.2226) (xy 118.898261 80.2226) (xy 118.725039 80.2226) (xy 118.725036 80.2226) - (xy 118.553947 80.249697) (xy 118.553943 80.249698) (xy 118.389211 80.303223) (xy 118.389208 80.303225) - (xy 118.234864 80.381866) (xy 118.094723 80.483685) (xy 117.972235 80.606173) (xy 117.870416 80.746314) - (xy 117.791775 80.900658) (xy 117.791773 80.900661) (xy 117.738248 81.065393) (xy 117.738247 81.065397) - (xy 117.71115 81.236485) (xy 117.37215 81.236485) (xy 117.345052 81.065397) (xy 117.345051 81.065393) - (xy 117.291526 80.900661) (xy 117.291524 80.900658) (xy 117.291523 80.900657) (xy 117.291523 80.900655) - (xy 117.212882 80.746312) (xy 117.111064 80.606172) (xy 116.988578 80.483686) (xy 116.848438 80.381868) - (xy 116.848437 80.381867) (xy 116.848435 80.381866) (xy 116.694091 80.303225) (xy 116.694088 80.303223) - (xy 116.529356 80.249698) (xy 116.529352 80.249697) (xy 116.358264 80.2226) (xy 116.358261 80.2226) - (xy 116.185039 80.2226) (xy 116.185036 80.2226) (xy 116.013947 80.249697) (xy 116.013943 80.249698) - (xy 115.849211 80.303223) (xy 115.849208 80.303225) (xy 115.694864 80.381866) (xy 115.554723 80.483685) - (xy 115.432235 80.606173) (xy 115.330416 80.746314) (xy 115.251775 80.900658) (xy 115.251773 80.900661) - (xy 115.197127 81.068843) (xy 115.161163 81.118343) (xy 115.102972 81.13725) (xy 115.044782 81.118342) - (xy 115.008818 81.068842) (xy 115.005192 81.053736) (xy 114.999641 81.018687) (xy 114.936406 80.824072) + (xy 114.936406 81.822127) (xy 114.99964 81.627514) (xy 115.008259 81.5731) (xy 114.164662 81.5731) + (xy 114.197575 81.516093) (xy 114.23165 81.388926) (xy 114.23165 81.257274) (xy 114.224203 81.229481) + (xy 115.32115 81.229481) (xy 115.32115 81.416718) (xy 115.357676 81.600349) (xy 115.429327 81.773329) + (xy 115.429331 81.773338) (xy 115.485965 81.858095) (xy 115.533348 81.929008) (xy 115.665742 82.061402) + (xy 115.732113 82.105749) (xy 115.821411 82.165418) (xy 115.821417 82.16542) (xy 115.821419 82.165422) + (xy 115.994399 82.237073) (xy 116.178034 82.2736) (xy 116.178035 82.2736) (xy 116.365265 82.2736) + (xy 116.365266 82.2736) (xy 116.548901 82.237073) (xy 116.721881 82.165422) (xy 116.721884 82.165419) + (xy 116.721888 82.165418) (xy 116.767397 82.135009) (xy 116.877558 82.061402) (xy 117.009952 81.929008) + (xy 117.103486 81.789025) (xy 117.113968 81.773338) (xy 117.113969 81.773334) (xy 117.113972 81.773331) + (xy 117.185623 81.600351) (xy 117.22215 81.416716) (xy 117.22215 81.229484) (xy 117.222149 81.229481) + (xy 117.86115 81.229481) (xy 117.86115 81.416718) (xy 117.897676 81.600349) (xy 117.969327 81.773329) + (xy 117.969331 81.773338) (xy 118.025965 81.858095) (xy 118.073348 81.929008) (xy 118.205742 82.061402) + (xy 118.272113 82.105749) (xy 118.361411 82.165418) (xy 118.361417 82.16542) (xy 118.361419 82.165422) + (xy 118.534399 82.237073) (xy 118.718034 82.2736) (xy 118.718035 82.2736) (xy 118.905265 82.2736) + (xy 118.905266 82.2736) (xy 119.088901 82.237073) (xy 119.261881 82.165422) (xy 119.261884 82.165419) + (xy 119.261888 82.165418) (xy 119.307397 82.135009) (xy 119.417558 82.061402) (xy 119.549952 81.929008) + (xy 119.643486 81.789025) (xy 119.653968 81.773338) (xy 119.653969 81.773334) (xy 119.653972 81.773331) + (xy 119.725623 81.600351) (xy 119.76215 81.416716) (xy 119.76215 81.229484) (xy 119.762149 81.229481) + (xy 120.40115 81.229481) (xy 120.40115 81.416718) (xy 120.437676 81.600349) (xy 120.509327 81.773329) + (xy 120.509331 81.773338) (xy 120.565965 81.858095) (xy 120.613348 81.929008) (xy 120.745742 82.061402) + (xy 120.812113 82.105749) (xy 120.901411 82.165418) (xy 120.901417 82.16542) (xy 120.901419 82.165422) + (xy 121.074399 82.237073) (xy 121.258034 82.2736) (xy 121.258035 82.2736) (xy 121.445265 82.2736) + (xy 121.445266 82.2736) (xy 121.628901 82.237073) (xy 121.801881 82.165422) (xy 121.801884 82.165419) + (xy 121.801888 82.165418) (xy 121.847397 82.135009) (xy 121.957558 82.061402) (xy 122.089952 81.929008) + (xy 122.183486 81.789025) (xy 122.193968 81.773338) (xy 122.193969 81.773334) (xy 122.193972 81.773331) + (xy 122.265623 81.600351) (xy 122.30215 81.416716) (xy 122.30215 81.229484) (xy 122.302149 81.229481) + (xy 122.94115 81.229481) (xy 122.94115 81.416718) (xy 122.977676 81.600349) (xy 123.049327 81.773329) + (xy 123.049331 81.773338) (xy 123.105965 81.858095) (xy 123.153348 81.929008) (xy 123.285742 82.061402) + (xy 123.352113 82.105749) (xy 123.441411 82.165418) (xy 123.441417 82.16542) (xy 123.441419 82.165422) + (xy 123.614399 82.237073) (xy 123.798034 82.2736) (xy 123.798035 82.2736) (xy 123.985265 82.2736) + (xy 123.985266 82.2736) (xy 124.168901 82.237073) (xy 124.341881 82.165422) (xy 124.341884 82.165419) + (xy 124.341888 82.165418) (xy 124.387397 82.135009) (xy 124.497558 82.061402) (xy 124.629952 81.929008) + (xy 124.723486 81.789025) (xy 124.733968 81.773338) (xy 124.733969 81.773334) (xy 124.733972 81.773331) + (xy 124.805623 81.600351) (xy 124.84215 81.416716) (xy 124.84215 81.229484) (xy 124.842149 81.229481) + (xy 125.48115 81.229481) (xy 125.48115 81.416718) (xy 125.517676 81.600349) (xy 125.589327 81.773329) + (xy 125.589331 81.773338) (xy 125.645965 81.858095) (xy 125.693348 81.929008) (xy 125.825742 82.061402) + (xy 125.892113 82.105749) (xy 125.981411 82.165418) (xy 125.981417 82.16542) (xy 125.981419 82.165422) + (xy 126.154399 82.237073) (xy 126.338034 82.2736) (xy 126.338035 82.2736) (xy 126.525265 82.2736) + (xy 126.525266 82.2736) (xy 126.708901 82.237073) (xy 126.881881 82.165422) (xy 126.881884 82.165419) + (xy 126.881888 82.165418) (xy 126.927397 82.135009) (xy 127.037558 82.061402) (xy 127.169952 81.929008) + (xy 127.263486 81.789025) (xy 127.273968 81.773338) (xy 127.273969 81.773334) (xy 127.273972 81.773331) + (xy 127.345623 81.600351) (xy 127.38215 81.416716) (xy 127.38215 81.229484) (xy 127.382149 81.229481) + (xy 128.02115 81.229481) (xy 128.02115 81.416718) (xy 128.057676 81.600349) (xy 128.129327 81.773329) + (xy 128.129331 81.773338) (xy 128.185965 81.858095) (xy 128.233348 81.929008) (xy 128.365742 82.061402) + (xy 128.432113 82.105749) (xy 128.521411 82.165418) (xy 128.521417 82.16542) (xy 128.521419 82.165422) + (xy 128.694399 82.237073) (xy 128.878034 82.2736) (xy 128.878035 82.2736) (xy 129.065265 82.2736) + (xy 129.065266 82.2736) (xy 129.248901 82.237073) (xy 129.421881 82.165422) (xy 129.421884 82.165419) + (xy 129.421888 82.165418) (xy 129.467397 82.135009) (xy 129.577558 82.061402) (xy 129.709952 81.929008) + (xy 129.803486 81.789025) (xy 129.813968 81.773338) (xy 129.813969 81.773334) (xy 129.813972 81.773331) + (xy 129.885623 81.600351) (xy 129.92215 81.416716) (xy 129.92215 81.229484) (xy 129.922149 81.229481) + (xy 132.08115 81.229481) (xy 132.08115 81.416718) (xy 132.117676 81.600349) (xy 132.189327 81.773329) + (xy 132.189331 81.773338) (xy 132.245965 81.858095) (xy 132.293348 81.929008) (xy 132.425742 82.061402) + (xy 132.492113 82.105749) (xy 132.581411 82.165418) (xy 132.581417 82.16542) (xy 132.581419 82.165422) + (xy 132.754399 82.237073) (xy 132.938034 82.2736) (xy 132.938035 82.2736) (xy 133.125265 82.2736) + (xy 133.125266 82.2736) (xy 133.308901 82.237073) (xy 133.481881 82.165422) (xy 133.481884 82.165419) + (xy 133.481888 82.165418) (xy 133.527397 82.135009) (xy 133.637558 82.061402) (xy 133.769952 81.929008) + (xy 133.863486 81.789025) (xy 133.873968 81.773338) (xy 133.873969 81.773334) (xy 133.873972 81.773331) + (xy 133.945623 81.600351) (xy 133.98215 81.416716) (xy 133.98215 81.229484) (xy 133.982149 81.229481) + (xy 134.62115 81.229481) (xy 134.62115 81.416718) (xy 134.657676 81.600349) (xy 134.729327 81.773329) + (xy 134.729331 81.773338) (xy 134.785965 81.858095) (xy 134.833348 81.929008) (xy 134.965742 82.061402) + (xy 135.032113 82.105749) (xy 135.121411 82.165418) (xy 135.121417 82.16542) (xy 135.121419 82.165422) + (xy 135.294399 82.237073) (xy 135.478034 82.2736) (xy 135.478035 82.2736) (xy 135.665265 82.2736) + (xy 135.665266 82.2736) (xy 135.848901 82.237073) (xy 136.021881 82.165422) (xy 136.021884 82.165419) + (xy 136.021888 82.165418) (xy 136.067397 82.135009) (xy 136.177558 82.061402) (xy 136.309952 81.929008) + (xy 136.403486 81.789025) (xy 136.413968 81.773338) (xy 136.413969 81.773334) (xy 136.413972 81.773331) + (xy 136.485623 81.600351) (xy 136.52215 81.416716) (xy 136.52215 81.229484) (xy 136.522149 81.229481) + (xy 137.16115 81.229481) (xy 137.16115 81.416718) (xy 137.197676 81.600349) (xy 137.269327 81.773329) + (xy 137.269331 81.773338) (xy 137.325965 81.858095) (xy 137.373348 81.929008) (xy 137.505742 82.061402) + (xy 137.572113 82.105749) (xy 137.661411 82.165418) (xy 137.661417 82.16542) (xy 137.661419 82.165422) + (xy 137.834399 82.237073) (xy 138.018034 82.2736) (xy 138.018035 82.2736) (xy 138.205265 82.2736) + (xy 138.205266 82.2736) (xy 138.388901 82.237073) (xy 138.561881 82.165422) (xy 138.561884 82.165419) + (xy 138.561888 82.165418) (xy 138.607397 82.135009) (xy 138.717558 82.061402) (xy 138.849952 81.929008) + (xy 138.943486 81.789025) (xy 138.953968 81.773338) (xy 138.953969 81.773334) (xy 138.953972 81.773331) + (xy 139.025623 81.600351) (xy 139.06215 81.416716) (xy 139.06215 81.229484) (xy 139.062149 81.229481) + (xy 139.70115 81.229481) (xy 139.70115 81.416718) (xy 139.737676 81.600349) (xy 139.809327 81.773329) + (xy 139.809331 81.773338) (xy 139.865965 81.858095) (xy 139.913348 81.929008) (xy 140.045742 82.061402) + (xy 140.112113 82.105749) (xy 140.201411 82.165418) (xy 140.201417 82.16542) (xy 140.201419 82.165422) + (xy 140.374399 82.237073) (xy 140.558034 82.2736) (xy 140.558035 82.2736) (xy 140.745265 82.2736) + (xy 140.745266 82.2736) (xy 140.928901 82.237073) (xy 141.101881 82.165422) (xy 141.101884 82.165419) + (xy 141.101888 82.165418) (xy 141.147397 82.135009) (xy 141.257558 82.061402) (xy 141.389952 81.929008) + (xy 141.483486 81.789025) (xy 141.493968 81.773338) (xy 141.493969 81.773334) (xy 141.493972 81.773331) + (xy 141.565623 81.600351) (xy 141.60215 81.416716) (xy 141.60215 81.229484) (xy 141.602149 81.229481) + (xy 142.24115 81.229481) (xy 142.24115 81.416718) (xy 142.277676 81.600349) (xy 142.349327 81.773329) + (xy 142.349331 81.773338) (xy 142.405965 81.858095) (xy 142.453348 81.929008) (xy 142.585742 82.061402) + (xy 142.652113 82.105749) (xy 142.741411 82.165418) (xy 142.741417 82.16542) (xy 142.741419 82.165422) + (xy 142.914399 82.237073) (xy 143.098034 82.2736) (xy 143.098035 82.2736) (xy 143.285265 82.2736) + (xy 143.285266 82.2736) (xy 143.468901 82.237073) (xy 143.641881 82.165422) (xy 143.641884 82.165419) + (xy 143.641888 82.165418) (xy 143.687397 82.135009) (xy 143.797558 82.061402) (xy 143.929952 81.929008) + (xy 144.023486 81.789025) (xy 144.033968 81.773338) (xy 144.033969 81.773334) (xy 144.033972 81.773331) + (xy 144.105623 81.600351) (xy 144.14215 81.416716) (xy 144.14215 81.229484) (xy 144.142149 81.229481) + (xy 144.78115 81.229481) (xy 144.78115 81.416718) (xy 144.817676 81.600349) (xy 144.889327 81.773329) + (xy 144.889331 81.773338) (xy 144.945965 81.858095) (xy 144.993348 81.929008) (xy 145.125742 82.061402) + (xy 145.192113 82.105749) (xy 145.281411 82.165418) (xy 145.281417 82.16542) (xy 145.281419 82.165422) + (xy 145.454399 82.237073) (xy 145.638034 82.2736) (xy 145.638035 82.2736) (xy 145.825265 82.2736) + (xy 145.825266 82.2736) (xy 146.008901 82.237073) (xy 146.181881 82.165422) (xy 146.181884 82.165419) + (xy 146.181888 82.165418) (xy 146.227397 82.135009) (xy 146.337558 82.061402) (xy 146.469952 81.929008) + (xy 146.563486 81.789025) (xy 146.573968 81.773338) (xy 146.573969 81.773334) (xy 146.573972 81.773331) + (xy 146.645623 81.600351) (xy 146.68215 81.416716) (xy 146.68215 81.229484) (xy 146.682149 81.229481) + (xy 147.32115 81.229481) (xy 147.32115 81.416718) (xy 147.357676 81.600349) (xy 147.429327 81.773329) + (xy 147.429331 81.773338) (xy 147.485965 81.858095) (xy 147.533348 81.929008) (xy 147.665742 82.061402) + (xy 147.732113 82.105749) (xy 147.821411 82.165418) (xy 147.821417 82.16542) (xy 147.821419 82.165422) + (xy 147.994399 82.237073) (xy 148.178034 82.2736) (xy 148.178035 82.2736) (xy 148.365265 82.2736) + (xy 148.365266 82.2736) (xy 148.548901 82.237073) (xy 148.721881 82.165422) (xy 148.721884 82.165419) + (xy 148.721888 82.165418) (xy 148.767397 82.135009) (xy 148.877558 82.061402) (xy 149.009952 81.929008) + (xy 149.103486 81.789025) (xy 149.113968 81.773338) (xy 149.113969 81.773334) (xy 149.113972 81.773331) + (xy 149.185623 81.600351) (xy 149.22215 81.416716) (xy 149.22215 81.229484) (xy 149.222149 81.229481) + (xy 149.86115 81.229481) (xy 149.86115 81.416718) (xy 149.897676 81.600349) (xy 149.969327 81.773329) + (xy 149.969331 81.773338) (xy 150.025965 81.858095) (xy 150.073348 81.929008) (xy 150.205742 82.061402) + (xy 150.272113 82.105749) (xy 150.361411 82.165418) (xy 150.361417 82.16542) (xy 150.361419 82.165422) + (xy 150.534399 82.237073) (xy 150.718034 82.2736) (xy 150.718035 82.2736) (xy 150.905265 82.2736) + (xy 150.905266 82.2736) (xy 151.088901 82.237073) (xy 151.261881 82.165422) (xy 151.261884 82.165419) + (xy 151.261888 82.165418) (xy 151.307397 82.135009) (xy 151.417558 82.061402) (xy 151.549952 81.929008) + (xy 151.643486 81.789025) (xy 151.653968 81.773338) (xy 151.653969 81.773334) (xy 151.653972 81.773331) + (xy 151.725623 81.600351) (xy 151.76215 81.416716) (xy 151.76215 81.229484) (xy 151.725623 81.045849) + (xy 151.653972 80.872869) (xy 151.65397 80.872866) (xy 151.653968 80.872862) (xy 151.59308 80.781738) + (xy 151.58553 80.770439) (xy 151.549952 80.717192) (xy 151.417558 80.584798) (xy 151.363854 80.548914) + (xy 151.261888 80.480781) (xy 151.261879 80.480777) (xy 151.088899 80.409126) (xy 150.905268 80.3726) + (xy 150.905266 80.3726) (xy 150.718034 80.3726) (xy 150.718031 80.3726) (xy 150.5344 80.409126) + (xy 150.36142 80.480777) (xy 150.361411 80.480781) (xy 150.205742 80.584798) (xy 150.205738 80.584801) + (xy 150.073351 80.717188) (xy 150.073348 80.717192) (xy 149.969331 80.872861) (xy 149.969327 80.87287) + (xy 149.897676 81.04585) (xy 149.86115 81.229481) (xy 149.222149 81.229481) (xy 149.185623 81.045849) + (xy 149.113972 80.872869) (xy 149.11397 80.872867) (xy 149.113968 80.872861) (xy 149.04553 80.770439) + (xy 149.009952 80.717192) (xy 148.877558 80.584798) (xy 148.823854 80.548914) (xy 148.721888 80.480781) + (xy 148.721879 80.480777) (xy 148.548899 80.409126) (xy 148.365268 80.3726) (xy 148.365266 80.3726) + (xy 148.178034 80.3726) (xy 148.178031 80.3726) (xy 147.9944 80.409126) (xy 147.82142 80.480777) + (xy 147.821411 80.480781) (xy 147.665742 80.584798) (xy 147.665738 80.584801) (xy 147.533351 80.717188) + (xy 147.533348 80.717192) (xy 147.429331 80.872861) (xy 147.429327 80.87287) (xy 147.357676 81.04585) + (xy 147.32115 81.229481) (xy 146.682149 81.229481) (xy 146.645623 81.045849) (xy 146.573972 80.872869) + (xy 146.57397 80.872867) (xy 146.573968 80.872861) (xy 146.50553 80.770439) (xy 146.469952 80.717192) + (xy 146.337558 80.584798) (xy 146.283854 80.548914) (xy 146.181888 80.480781) (xy 146.181879 80.480777) + (xy 146.008899 80.409126) (xy 145.825268 80.3726) (xy 145.825266 80.3726) (xy 145.638034 80.3726) + (xy 145.638031 80.3726) (xy 145.4544 80.409126) (xy 145.28142 80.480777) (xy 145.281411 80.480781) + (xy 145.125742 80.584798) (xy 145.125738 80.584801) (xy 144.993351 80.717188) (xy 144.993348 80.717192) + (xy 144.889331 80.872861) (xy 144.889327 80.87287) (xy 144.817676 81.04585) (xy 144.78115 81.229481) + (xy 144.142149 81.229481) (xy 144.105623 81.045849) (xy 144.033972 80.872869) (xy 144.03397 80.872867) + (xy 144.033968 80.872861) (xy 143.96553 80.770439) (xy 143.929952 80.717192) (xy 143.797558 80.584798) + (xy 143.743854 80.548914) (xy 143.641888 80.480781) (xy 143.641879 80.480777) (xy 143.468899 80.409126) + (xy 143.285268 80.3726) (xy 143.285266 80.3726) (xy 143.098034 80.3726) (xy 143.098031 80.3726) + (xy 142.9144 80.409126) (xy 142.74142 80.480777) (xy 142.741411 80.480781) (xy 142.585742 80.584798) + (xy 142.585738 80.584801) (xy 142.453351 80.717188) (xy 142.453348 80.717192) (xy 142.349331 80.872861) + (xy 142.349327 80.87287) (xy 142.277676 81.04585) (xy 142.24115 81.229481) (xy 141.602149 81.229481) + (xy 141.565623 81.045849) (xy 141.493972 80.872869) (xy 141.49397 80.872867) (xy 141.493968 80.872861) + (xy 141.42553 80.770439) (xy 141.389952 80.717192) (xy 141.257558 80.584798) (xy 141.203854 80.548914) + (xy 141.101888 80.480781) (xy 141.101879 80.480777) (xy 140.928899 80.409126) (xy 140.745268 80.3726) + (xy 140.745266 80.3726) (xy 140.558034 80.3726) (xy 140.558031 80.3726) (xy 140.3744 80.409126) + (xy 140.20142 80.480777) (xy 140.201411 80.480781) (xy 140.045742 80.584798) (xy 140.045738 80.584801) + (xy 139.913351 80.717188) (xy 139.913348 80.717192) (xy 139.809331 80.872861) (xy 139.809327 80.87287) + (xy 139.737676 81.04585) (xy 139.70115 81.229481) (xy 139.062149 81.229481) (xy 139.025623 81.045849) + (xy 138.953972 80.872869) (xy 138.95397 80.872867) (xy 138.953968 80.872861) (xy 138.88553 80.770439) + (xy 138.849952 80.717192) (xy 138.717558 80.584798) (xy 138.663854 80.548914) (xy 138.561888 80.480781) + (xy 138.561879 80.480777) (xy 138.388899 80.409126) (xy 138.205268 80.3726) (xy 138.205266 80.3726) + (xy 138.018034 80.3726) (xy 138.018031 80.3726) (xy 137.8344 80.409126) (xy 137.66142 80.480777) + (xy 137.661411 80.480781) (xy 137.505742 80.584798) (xy 137.505738 80.584801) (xy 137.373351 80.717188) + (xy 137.373348 80.717192) (xy 137.269331 80.872861) (xy 137.269327 80.87287) (xy 137.197676 81.04585) + (xy 137.16115 81.229481) (xy 136.522149 81.229481) (xy 136.485623 81.045849) (xy 136.413972 80.872869) + (xy 136.41397 80.872867) (xy 136.413968 80.872861) (xy 136.34553 80.770439) (xy 136.309952 80.717192) + (xy 136.177558 80.584798) (xy 136.123854 80.548914) (xy 136.021888 80.480781) (xy 136.021879 80.480777) + (xy 135.848899 80.409126) (xy 135.665268 80.3726) (xy 135.665266 80.3726) (xy 135.478034 80.3726) + (xy 135.478031 80.3726) (xy 135.2944 80.409126) (xy 135.12142 80.480777) (xy 135.121411 80.480781) + (xy 134.965742 80.584798) (xy 134.965738 80.584801) (xy 134.833351 80.717188) (xy 134.833348 80.717192) + (xy 134.729331 80.872861) (xy 134.729327 80.87287) (xy 134.657676 81.04585) (xy 134.62115 81.229481) + (xy 133.982149 81.229481) (xy 133.945623 81.045849) (xy 133.873972 80.872869) (xy 133.87397 80.872867) + (xy 133.873968 80.872861) (xy 133.80553 80.770439) (xy 133.769952 80.717192) (xy 133.637558 80.584798) + (xy 133.583854 80.548914) (xy 133.481888 80.480781) (xy 133.481879 80.480777) (xy 133.308899 80.409126) + (xy 133.125268 80.3726) (xy 133.125266 80.3726) (xy 132.938034 80.3726) (xy 132.938031 80.3726) + (xy 132.7544 80.409126) (xy 132.58142 80.480777) (xy 132.581411 80.480781) (xy 132.425742 80.584798) + (xy 132.425738 80.584801) (xy 132.293351 80.717188) (xy 132.293348 80.717192) (xy 132.189331 80.872861) + (xy 132.189327 80.87287) (xy 132.117676 81.04585) (xy 132.08115 81.229481) (xy 129.922149 81.229481) + (xy 129.885623 81.045849) (xy 129.813972 80.872869) (xy 129.81397 80.872867) (xy 129.813968 80.872861) + (xy 129.74553 80.770439) (xy 129.709952 80.717192) (xy 129.577558 80.584798) (xy 129.523854 80.548914) + (xy 129.421888 80.480781) (xy 129.421879 80.480777) (xy 129.248899 80.409126) (xy 129.065268 80.3726) + (xy 129.065266 80.3726) (xy 128.878034 80.3726) (xy 128.878031 80.3726) (xy 128.6944 80.409126) + (xy 128.52142 80.480777) (xy 128.521411 80.480781) (xy 128.365742 80.584798) (xy 128.365738 80.584801) + (xy 128.233351 80.717188) (xy 128.233348 80.717192) (xy 128.129331 80.872861) (xy 128.129327 80.87287) + (xy 128.057676 81.04585) (xy 128.02115 81.229481) (xy 127.382149 81.229481) (xy 127.345623 81.045849) + (xy 127.273972 80.872869) (xy 127.27397 80.872867) (xy 127.273968 80.872861) (xy 127.20553 80.770439) + (xy 127.169952 80.717192) (xy 127.037558 80.584798) (xy 126.983854 80.548914) (xy 126.881888 80.480781) + (xy 126.881879 80.480777) (xy 126.708899 80.409126) (xy 126.525268 80.3726) (xy 126.525266 80.3726) + (xy 126.338034 80.3726) (xy 126.338031 80.3726) (xy 126.1544 80.409126) (xy 125.98142 80.480777) + (xy 125.981411 80.480781) (xy 125.825742 80.584798) (xy 125.825738 80.584801) (xy 125.693351 80.717188) + (xy 125.693348 80.717192) (xy 125.589331 80.872861) (xy 125.589327 80.87287) (xy 125.517676 81.04585) + (xy 125.48115 81.229481) (xy 124.842149 81.229481) (xy 124.805623 81.045849) (xy 124.733972 80.872869) + (xy 124.73397 80.872867) (xy 124.733968 80.872861) (xy 124.66553 80.770439) (xy 124.629952 80.717192) + (xy 124.497558 80.584798) (xy 124.443854 80.548914) (xy 124.341888 80.480781) (xy 124.341879 80.480777) + (xy 124.168899 80.409126) (xy 123.985268 80.3726) (xy 123.985266 80.3726) (xy 123.798034 80.3726) + (xy 123.798031 80.3726) (xy 123.6144 80.409126) (xy 123.44142 80.480777) (xy 123.441411 80.480781) + (xy 123.285742 80.584798) (xy 123.285738 80.584801) (xy 123.153351 80.717188) (xy 123.153348 80.717192) + (xy 123.049331 80.872861) (xy 123.049327 80.87287) (xy 122.977676 81.04585) (xy 122.94115 81.229481) + (xy 122.302149 81.229481) (xy 122.265623 81.045849) (xy 122.193972 80.872869) (xy 122.19397 80.872867) + (xy 122.193968 80.872861) (xy 122.12553 80.770439) (xy 122.089952 80.717192) (xy 121.957558 80.584798) + (xy 121.903854 80.548914) (xy 121.801888 80.480781) (xy 121.801879 80.480777) (xy 121.628899 80.409126) + (xy 121.445268 80.3726) (xy 121.445266 80.3726) (xy 121.258034 80.3726) (xy 121.258031 80.3726) + (xy 121.0744 80.409126) (xy 120.90142 80.480777) (xy 120.901411 80.480781) (xy 120.745742 80.584798) + (xy 120.745738 80.584801) (xy 120.613351 80.717188) (xy 120.613348 80.717192) (xy 120.509331 80.872861) + (xy 120.509327 80.87287) (xy 120.437676 81.04585) (xy 120.40115 81.229481) (xy 119.762149 81.229481) + (xy 119.725623 81.045849) (xy 119.653972 80.872869) (xy 119.65397 80.872867) (xy 119.653968 80.872861) + (xy 119.58553 80.770439) (xy 119.549952 80.717192) (xy 119.417558 80.584798) (xy 119.363854 80.548914) + (xy 119.261888 80.480781) (xy 119.261879 80.480777) (xy 119.088899 80.409126) (xy 118.905268 80.3726) + (xy 118.905266 80.3726) (xy 118.718034 80.3726) (xy 118.718031 80.3726) (xy 118.5344 80.409126) + (xy 118.36142 80.480777) (xy 118.361411 80.480781) (xy 118.205742 80.584798) (xy 118.205738 80.584801) + (xy 118.073351 80.717188) (xy 118.073348 80.717192) (xy 117.969331 80.872861) (xy 117.969327 80.87287) + (xy 117.897676 81.04585) (xy 117.86115 81.229481) (xy 117.222149 81.229481) (xy 117.185623 81.045849) + (xy 117.113972 80.872869) (xy 117.11397 80.872867) (xy 117.113968 80.872861) (xy 117.04553 80.770439) + (xy 117.009952 80.717192) (xy 116.877558 80.584798) (xy 116.823854 80.548914) (xy 116.721888 80.480781) + (xy 116.721879 80.480777) (xy 116.548899 80.409126) (xy 116.365268 80.3726) (xy 116.365266 80.3726) + (xy 116.178034 80.3726) (xy 116.178031 80.3726) (xy 115.9944 80.409126) (xy 115.82142 80.480777) + (xy 115.821411 80.480781) (xy 115.665742 80.584798) (xy 115.665738 80.584801) (xy 115.533351 80.717188) + (xy 115.533348 80.717192) (xy 115.429331 80.872861) (xy 115.429327 80.87287) (xy 115.357676 81.04585) + (xy 115.32115 81.229481) (xy 114.224203 81.229481) (xy 114.197575 81.130107) (xy 114.164662 81.0731) + (xy 115.008259 81.0731) (xy 115.008259 81.073099) (xy 114.99964 81.018685) (xy 114.936406 80.824072) (xy 114.843511 80.641753) (xy 114.723235 80.476208) (xy 114.578541 80.331514) (xy 114.412996 80.211238) (xy 114.230677 80.118343) (xy 114.036064 80.055109) (xy 113.98165 80.04649) (xy 113.98165 80.890088) (xy 113.924643 80.857175) (xy 113.797476 80.8231) (xy 113.665824 80.8231) (xy 113.538657 80.857175) (xy 113.48165 80.890088) (xy 113.48165 80.046491) (xy 113.481649 80.04649) (xy 113.427235 80.055109) (xy 113.232622 80.118343) (xy 113.050303 80.211238) (xy 112.884758 80.331514) (xy 112.740064 80.476208) - (xy 112.619788 80.641753) (xy 112.526893 80.824072) (xy 112.463659 81.018686) (xy 112.458107 81.053738) - (xy 112.430329 81.108254) (xy 112.375812 81.136031) (xy 112.31538 81.126459) (xy 112.272116 81.083194) - (xy 112.266171 81.068843) (xy 112.249031 81.016093) (xy 112.211523 80.900655) (xy 112.132882 80.746312) - (xy 112.031064 80.606172) (xy 111.908578 80.483686) (xy 111.768438 80.381868) (xy 111.768437 80.381867) - (xy 111.768435 80.381866) (xy 111.614091 80.303225) (xy 111.614088 80.303223) (xy 111.449356 80.249698) - (xy 111.449352 80.249697) (xy 111.278264 80.2226) (xy 111.278261 80.2226) (xy 111.105039 80.2226) - (xy 111.105036 80.2226) (xy 110.933947 80.249697) (xy 110.933943 80.249698) (xy 110.769211 80.303223) - (xy 110.769208 80.303225) (xy 110.614864 80.381866) (xy 110.474723 80.483685) (xy 110.352235 80.606173) - (xy 110.250416 80.746314) (xy 110.171775 80.900658) (xy 110.171773 80.900661) (xy 110.118248 81.065393) - (xy 110.118247 81.065397) (xy 110.09115 81.236485) (xy 109.75215 81.236485) (xy 109.725052 81.065397) - (xy 109.725051 81.065393) (xy 109.671526 80.900661) (xy 109.671524 80.900658) (xy 109.671523 80.900657) - (xy 109.671523 80.900655) (xy 109.592882 80.746312) (xy 109.491064 80.606172) (xy 109.368578 80.483686) - (xy 109.228438 80.381868) (xy 109.228437 80.381867) (xy 109.228435 80.381866) (xy 109.074091 80.303225) - (xy 109.074088 80.303223) (xy 108.909356 80.249698) (xy 108.909352 80.249697) (xy 108.738264 80.2226) - (xy 108.738261 80.2226) (xy 108.565039 80.2226) (xy 108.565036 80.2226) (xy 108.393947 80.249697) - (xy 108.393943 80.249698) (xy 108.229211 80.303223) (xy 108.229208 80.303225) (xy 108.074864 80.381866) - (xy 107.934723 80.483685) (xy 107.812235 80.606173) (xy 107.710416 80.746314) (xy 107.631775 80.900658) - (xy 107.631773 80.900661) (xy 107.578248 81.065393) (xy 107.578247 81.065397) (xy 107.55115 81.236485) - (xy 107.55115 81.409714) (xy 107.578247 81.580798) (xy 107.58392 81.598258) (xy 107.58392 81.659444) - (xy 107.547956 81.708944) (xy 107.515389 81.724477) (xy 107.422669 81.749321) (xy 107.422665 81.749323) - (xy 107.286135 81.828148) (xy 107.226287 81.840869) (xy 107.170392 81.815982) (xy 107.139799 81.762994) - (xy 107.142482 81.711818) (xy 107.185051 81.580806) (xy 107.185052 81.580802) (xy 107.21215 81.409714) - (xy 107.21215 81.236485) (xy 107.185052 81.065397) (xy 107.185051 81.065393) (xy 107.131526 80.900661) - (xy 107.131524 80.900658) (xy 107.131523 80.900657) (xy 107.131523 80.900655) (xy 107.052882 80.746312) - (xy 106.951064 80.606172) (xy 106.828578 80.483686) (xy 106.688438 80.381868) (xy 106.688437 80.381867) - (xy 106.688435 80.381866) (xy 106.534091 80.303225) (xy 106.534088 80.303223) (xy 106.369356 80.249698) - (xy 106.369352 80.249697) (xy 106.198264 80.2226) (xy 106.198261 80.2226) (xy 106.025039 80.2226) - (xy 106.025036 80.2226) (xy 105.853947 80.249697) (xy 105.853943 80.249698) (xy 105.689211 80.303223) - (xy 105.689208 80.303225) (xy 105.534864 80.381866) (xy 105.394723 80.483685) (xy 105.272235 80.606173) - (xy 105.170416 80.746314) (xy 105.091775 80.900658) (xy 105.091773 80.900661) (xy 105.038248 81.065393) - (xy 105.038247 81.065397) (xy 105.01115 81.236485) (xy 103.187322 81.236485) (xy 103.244766 81.20332) - (xy 103.35657 81.091516) (xy 103.435627 80.954584) (xy 103.47655 80.801857) (xy 103.47655 80.643743) - (xy 103.435627 80.491016) (xy 103.35657 80.354084) (xy 103.244766 80.24228) (xy 103.107834 80.163223) - (xy 102.955107 80.1223) (xy 102.796993 80.1223) (xy 102.644266 80.163223) (xy 102.507334 80.24228) - (xy 102.39553 80.354084) (xy 102.316473 80.491016) (xy 102.27555 80.643743) (xy 80.802174 80.643743) - (xy 80.802168 80.637354) (xy 80.8001 78.592043) (xy 96.03215 78.592043) (xy 96.03215 78.750157) - (xy 96.073073 78.902884) (xy 96.15213 79.039816) (xy 96.263934 79.15162) (xy 96.400866 79.230677) - (xy 96.553593 79.2716) (xy 96.553595 79.2716) (xy 96.711705 79.2716) (xy 96.711707 79.2716) (xy 96.864434 79.230677) - (xy 97.001366 79.15162) (xy 97.11317 79.039816) (xy 97.164307 78.951243) (xy 166.19755 78.951243) - (xy 166.19755 79.109357) (xy 166.238473 79.262084) (xy 166.31753 79.399016) (xy 166.429334 79.51082) - (xy 166.566266 79.589877) (xy 166.718993 79.6308) (xy 166.718995 79.6308) (xy 166.877105 79.6308) - (xy 166.877107 79.6308) (xy 167.029834 79.589877) (xy 167.166766 79.51082) (xy 167.27857 79.399016) - (xy 167.357627 79.262084) (xy 167.39855 79.109357) (xy 167.39855 78.951243) (xy 167.357627 78.798516) - (xy 167.27857 78.661584) (xy 167.166766 78.54978) (xy 167.029834 78.470723) (xy 166.877107 78.4298) - (xy 166.718993 78.4298) (xy 166.566266 78.470723) (xy 166.429334 78.54978) (xy 166.31753 78.661584) - (xy 166.238473 78.798516) (xy 166.19755 78.951243) (xy 97.164307 78.951243) (xy 97.192227 78.902884) - (xy 97.23315 78.750157) (xy 97.23315 78.592043) (xy 97.192227 78.439316) (xy 97.11317 78.302384) - (xy 97.001366 78.19058) (xy 96.864434 78.111523) (xy 96.711707 78.0706) (xy 96.553593 78.0706) (xy 96.400866 78.111523) - (xy 96.263934 78.19058) (xy 96.15213 78.302384) (xy 96.073073 78.439316) (xy 96.03215 78.592043) - (xy 80.8001 78.592043) (xy 80.800094 78.585654) (xy 80.799492 77.990243) (xy 97.55765 77.990243) - (xy 97.55765 78.148357) (xy 97.598573 78.301084) (xy 97.67763 78.438016) (xy 97.789434 78.54982) - (xy 97.926366 78.628877) (xy 98.079093 78.6698) (xy 98.079095 78.6698) (xy 98.237205 78.6698) (xy 98.237207 78.6698) - (xy 98.389934 78.628877) (xy 98.526866 78.54982) (xy 98.63867 78.438016) (xy 98.717727 78.301084) - (xy 98.75865 78.148357) (xy 98.75865 77.990243) (xy 98.717727 77.837516) (xy 98.63867 77.700584) - (xy 98.526866 77.58878) (xy 98.389934 77.509723) (xy 98.237207 77.4688) (xy 98.079093 77.4688) (xy 97.926366 77.509723) - (xy 97.789434 77.58878) (xy 97.67763 77.700584) (xy 97.598573 77.837516) (xy 97.55765 77.990243) - (xy 80.799492 77.990243) (xy 80.798593 77.101043) (xy 100.91525 77.101043) (xy 100.91525 77.259157) - (xy 100.956173 77.411884) (xy 101.03523 77.548816) (xy 101.147034 77.66062) (xy 101.283966 77.739677) - (xy 101.436693 77.7806) (xy 101.436695 77.7806) (xy 101.594805 77.7806) (xy 101.594807 77.7806) - (xy 101.681603 77.757343) (xy 162.73285 77.757343) (xy 162.73285 77.915457) (xy 162.773773 78.068184) - (xy 162.85283 78.205116) (xy 162.964634 78.31692) (xy 163.101566 78.395977) (xy 163.254293 78.4369) - (xy 163.254295 78.4369) (xy 163.412405 78.4369) (xy 163.412407 78.4369) (xy 163.565134 78.395977) - (xy 163.702066 78.31692) (xy 163.81387 78.205116) (xy 163.892927 78.068184) (xy 163.93385 77.915457) - (xy 163.93385 77.757343) (xy 163.892927 77.604616) (xy 163.81387 77.467684) (xy 163.702066 77.35588) - (xy 163.565134 77.276823) (xy 163.412407 77.2359) (xy 163.254293 77.2359) (xy 163.101566 77.276823) - (xy 162.964634 77.35588) (xy 162.85283 77.467684) (xy 162.773773 77.604616) (xy 162.73285 77.757343) - (xy 101.681603 77.757343) (xy 101.747534 77.739677) (xy 101.884466 77.66062) (xy 101.99627 77.548816) - (xy 102.075327 77.411884) (xy 102.11625 77.259157) (xy 102.11625 77.101043) (xy 102.075327 76.948316) - (xy 101.99627 76.811384) (xy 101.884466 76.69958) (xy 101.747534 76.620523) (xy 101.594807 76.5796) - (xy 101.436693 76.5796) (xy 101.283966 76.620523) (xy 101.147034 76.69958) (xy 101.03523 76.811384) - (xy 100.956173 76.948316) (xy 100.91525 77.101043) (xy 80.798593 77.101043) (xy 80.798587 77.094654) - (xy 80.79688 75.406243) (xy 101.37595 75.406243) (xy 101.37595 75.564357) (xy 101.416873 75.717084) - (xy 101.49593 75.854016) (xy 101.607734 75.96582) (xy 101.744666 76.044877) (xy 101.897393 76.0858) - (xy 101.897395 76.0858) (xy 102.055505 76.0858) (xy 102.055507 76.0858) (xy 102.208234 76.044877) - (xy 102.345166 75.96582) (xy 102.45697 75.854016) (xy 102.459148 75.850243) (xy 165.43945 75.850243) - (xy 165.43945 76.008357) (xy 165.480373 76.161084) (xy 165.55943 76.298016) (xy 165.671234 76.40982) - (xy 165.808166 76.488877) (xy 165.960893 76.5298) (xy 165.960895 76.5298) (xy 166.119005 76.5298) - (xy 166.119007 76.5298) (xy 166.271734 76.488877) (xy 166.408666 76.40982) (xy 166.52047 76.298016) - (xy 166.599527 76.161084) (xy 166.64045 76.008357) (xy 166.64045 75.927662) (xy 166.659357 75.869471) - (xy 166.708857 75.833507) (xy 166.713793 75.832045) (xy 166.758834 75.819977) (xy 166.895766 75.74092) - (xy 167.00757 75.629116) (xy 167.086627 75.492184) (xy 167.12755 75.339457) (xy 167.12755 75.181343) - (xy 167.086627 75.028616) (xy 167.00757 74.891684) (xy 166.895766 74.77988) (xy 166.758834 74.700823) - (xy 166.606107 74.6599) (xy 166.447993 74.6599) (xy 166.295266 74.700823) (xy 166.158334 74.77988) - (xy 166.04653 74.891684) (xy 165.967473 75.028616) (xy 165.92655 75.181344) (xy 165.92655 75.262036) - (xy 165.907643 75.320227) (xy 165.858143 75.356191) (xy 165.853175 75.357662) (xy 165.808168 75.369722) - (xy 165.808166 75.369722) (xy 165.808166 75.369723) (xy 165.671234 75.44878) (xy 165.55943 75.560584) - (xy 165.480373 75.697516) (xy 165.43945 75.850243) (xy 102.459148 75.850243) (xy 102.536027 75.717084) - (xy 102.57695 75.564357) (xy 102.57695 75.406243) (xy 102.536027 75.253516) (xy 102.45697 75.116584) - (xy 102.345166 75.00478) (xy 102.208234 74.925723) (xy 102.055507 74.8848) (xy 101.897393 74.8848) - (xy 101.744666 74.925723) (xy 101.607734 75.00478) (xy 101.49593 75.116584) (xy 101.416873 75.253516) - (xy 101.37595 75.406243) (xy 80.79688 75.406243) (xy 80.796874 75.399854) (xy 80.795493 74.034243) - (xy 97.48215 74.034243) (xy 97.48215 74.192357) (xy 97.523073 74.345084) (xy 97.60213 74.482016) - (xy 97.713934 74.59382) (xy 97.850866 74.672877) (xy 98.003593 74.7138) (xy 98.003595 74.7138) (xy 98.161705 74.7138) - (xy 98.161707 74.7138) (xy 98.314434 74.672877) (xy 98.451366 74.59382) (xy 98.56317 74.482016) - (xy 98.642227 74.345084) (xy 98.68315 74.192357) (xy 98.68315 74.034243) (xy 98.642227 73.881516) - (xy 98.56317 73.744584) (xy 98.451366 73.63278) (xy 98.314434 73.553723) (xy 98.161707 73.5128) - (xy 98.003593 73.5128) (xy 97.850866 73.553723) (xy 97.713934 73.63278) (xy 97.60213 73.744584) - (xy 97.523073 73.881516) (xy 97.48215 74.034243) (xy 80.795493 74.034243) (xy 80.795487 74.027854) - (xy 80.794659 73.20823) (xy 106.04115 73.20823) (xy 106.04115 74.99796) (xy 106.041151 74.997963) - (xy 106.044064 75.02309) (xy 106.069406 75.080485) (xy 106.089444 75.125865) (xy 106.168885 75.205306) - (xy 106.271659 75.250685) (xy 106.296785 75.2536) (xy 108.086514 75.253599) (xy 108.111641 75.250685) - (xy 108.214415 75.205306) (xy 108.293856 75.125865) (xy 108.339235 75.023091) (xy 108.34215 74.997965) - (xy 108.342149 74.01255) (xy 108.58115 74.01255) (xy 108.58115 74.193649) (xy 108.609478 74.372506) - (xy 108.665438 74.544737) (xy 108.704456 74.621315) (xy 108.747654 74.706094) (xy 108.854097 74.852601) - (xy 108.982149 74.980653) (xy 109.128656 75.087096) (xy 109.290011 75.169311) (xy 109.462241 75.225271) - (xy 109.533786 75.236602) (xy 109.641101 75.2536) (xy 109.641104 75.2536) (xy 109.822199 75.2536) - (xy 109.911627 75.239435) (xy 110.001059 75.225271) (xy 110.173289 75.169311) (xy 110.334644 75.087096) - (xy 110.481151 74.980653) (xy 110.609203 74.852601) (xy 110.715646 74.706094) (xy 110.797861 74.544739) - (xy 110.853821 74.372509) (xy 110.88215 74.193646) (xy 110.88215 74.012554) (xy 110.88215 74.01255) - (xy 111.12115 74.01255) (xy 111.12115 74.193649) (xy 111.149478 74.372506) (xy 111.205438 74.544737) - (xy 111.244456 74.621315) (xy 111.287654 74.706094) (xy 111.394097 74.852601) (xy 111.522149 74.980653) - (xy 111.668656 75.087096) (xy 111.830011 75.169311) (xy 112.002241 75.225271) (xy 112.073786 75.236602) - (xy 112.181101 75.2536) (xy 112.181104 75.2536) (xy 112.362199 75.2536) (xy 112.451627 75.239435) - (xy 112.541059 75.225271) (xy 112.713289 75.169311) (xy 112.874644 75.087096) (xy 113.021151 74.980653) - (xy 113.149203 74.852601) (xy 113.255646 74.706094) (xy 113.337861 74.544739) (xy 113.393821 74.372509) - (xy 113.42215 74.193646) (xy 113.42215 74.012554) (xy 113.42215 74.01255) (xy 113.66115 74.01255) - (xy 113.66115 74.193649) (xy 113.689478 74.372506) (xy 113.745438 74.544737) (xy 113.784456 74.621315) - (xy 113.827654 74.706094) (xy 113.934097 74.852601) (xy 114.062149 74.980653) (xy 114.208656 75.087096) - (xy 114.370011 75.169311) (xy 114.542241 75.225271) (xy 114.613786 75.236602) (xy 114.721101 75.2536) - (xy 114.721104 75.2536) (xy 114.902199 75.2536) (xy 114.991627 75.239435) (xy 115.081059 75.225271) - (xy 115.253289 75.169311) (xy 115.414644 75.087096) (xy 115.561151 74.980653) (xy 115.689203 74.852601) - (xy 115.795646 74.706094) (xy 115.877861 74.544739) (xy 115.933821 74.372509) (xy 115.96215 74.193646) - (xy 115.96215 74.012554) (xy 115.96215 74.01255) (xy 116.20115 74.01255) (xy 116.20115 74.193649) - (xy 116.229478 74.372506) (xy 116.285438 74.544737) (xy 116.324456 74.621315) (xy 116.367654 74.706094) - (xy 116.474097 74.852601) (xy 116.602149 74.980653) (xy 116.748656 75.087096) (xy 116.910011 75.169311) - (xy 117.082241 75.225271) (xy 117.153786 75.236602) (xy 117.261101 75.2536) (xy 117.261104 75.2536) - (xy 117.442199 75.2536) (xy 117.531627 75.239435) (xy 117.621059 75.225271) (xy 117.793289 75.169311) - (xy 117.954644 75.087096) (xy 118.101151 74.980653) (xy 118.229203 74.852601) (xy 118.335646 74.706094) - (xy 118.417861 74.544739) (xy 118.473821 74.372509) (xy 118.50215 74.193646) (xy 118.50215 74.012554) - (xy 118.50215 74.01255) (xy 118.74115 74.01255) (xy 118.74115 74.193649) (xy 118.769478 74.372506) - (xy 118.825438 74.544737) (xy 118.864456 74.621315) (xy 118.907654 74.706094) (xy 119.014097 74.852601) - (xy 119.142149 74.980653) (xy 119.288656 75.087096) (xy 119.450011 75.169311) (xy 119.622241 75.225271) - (xy 119.693786 75.236602) (xy 119.801101 75.2536) (xy 119.801104 75.2536) (xy 119.982199 75.2536) - (xy 120.071627 75.239435) (xy 120.161059 75.225271) (xy 120.333289 75.169311) (xy 120.494644 75.087096) - (xy 120.641151 74.980653) (xy 120.769203 74.852601) (xy 120.875646 74.706094) (xy 120.957861 74.544739) - (xy 121.013821 74.372509) (xy 121.04215 74.193646) (xy 121.04215 74.012554) (xy 121.04215 74.01255) - (xy 121.28115 74.01255) (xy 121.28115 74.193649) (xy 121.309478 74.372506) (xy 121.365438 74.544737) - (xy 121.404456 74.621315) (xy 121.447654 74.706094) (xy 121.554097 74.852601) (xy 121.682149 74.980653) - (xy 121.828656 75.087096) (xy 121.990011 75.169311) (xy 122.162241 75.225271) (xy 122.233786 75.236602) - (xy 122.341101 75.2536) (xy 122.341104 75.2536) (xy 122.522199 75.2536) (xy 122.611627 75.239435) - (xy 122.701059 75.225271) (xy 122.873289 75.169311) (xy 123.034644 75.087096) (xy 123.181151 74.980653) - (xy 123.309203 74.852601) (xy 123.415646 74.706094) (xy 123.497861 74.544739) (xy 123.553821 74.372509) - (xy 123.58215 74.193646) (xy 123.58215 74.012554) (xy 123.58215 74.01255) (xy 123.82115 74.01255) - (xy 123.82115 74.193649) (xy 123.849478 74.372506) (xy 123.905438 74.544737) (xy 123.944456 74.621315) - (xy 123.987654 74.706094) (xy 124.094097 74.852601) (xy 124.222149 74.980653) (xy 124.368656 75.087096) - (xy 124.530011 75.169311) (xy 124.702241 75.225271) (xy 124.773786 75.236602) (xy 124.881101 75.2536) - (xy 124.881104 75.2536) (xy 125.062199 75.2536) (xy 125.151627 75.239435) (xy 125.241059 75.225271) - (xy 125.413289 75.169311) (xy 125.574644 75.087096) (xy 125.721151 74.980653) (xy 125.849203 74.852601) - (xy 125.955646 74.706094) (xy 126.037861 74.544739) (xy 126.093821 74.372509) (xy 126.12215 74.193646) - (xy 126.12215 74.012554) (xy 126.12215 74.01255) (xy 126.36115 74.01255) (xy 126.36115 74.193649) - (xy 126.389478 74.372506) (xy 126.445438 74.544737) (xy 126.484456 74.621315) (xy 126.527654 74.706094) - (xy 126.634097 74.852601) (xy 126.762149 74.980653) (xy 126.908656 75.087096) (xy 127.070011 75.169311) - (xy 127.242241 75.225271) (xy 127.313786 75.236602) (xy 127.421101 75.2536) (xy 127.421104 75.2536) - (xy 127.602199 75.2536) (xy 127.691627 75.239435) (xy 127.781059 75.225271) (xy 127.953289 75.169311) - (xy 128.114644 75.087096) (xy 128.261151 74.980653) (xy 128.389203 74.852601) (xy 128.495646 74.706094) - (xy 128.577861 74.544739) (xy 128.633821 74.372509) (xy 128.66215 74.193646) (xy 128.66215 74.012554) - (xy 128.66215 74.01255) (xy 128.90115 74.01255) (xy 128.90115 74.193649) (xy 128.929478 74.372506) - (xy 128.985438 74.544737) (xy 129.024456 74.621315) (xy 129.067654 74.706094) (xy 129.174097 74.852601) - (xy 129.302149 74.980653) (xy 129.448656 75.087096) (xy 129.610011 75.169311) (xy 129.782241 75.225271) - (xy 129.853786 75.236602) (xy 129.961101 75.2536) (xy 129.961104 75.2536) (xy 130.142199 75.2536) - (xy 130.231627 75.239435) (xy 130.321059 75.225271) (xy 130.493289 75.169311) (xy 130.654644 75.087096) - (xy 130.801151 74.980653) (xy 130.929203 74.852601) (xy 131.035646 74.706094) (xy 131.117861 74.544739) - (xy 131.173821 74.372509) (xy 131.20215 74.193646) (xy 131.20215 74.012554) (xy 131.20215 74.01255) - (xy 131.44115 74.01255) (xy 131.44115 74.193649) (xy 131.469478 74.372506) (xy 131.525438 74.544737) - (xy 131.564456 74.621315) (xy 131.607654 74.706094) (xy 131.714097 74.852601) (xy 131.842149 74.980653) - (xy 131.988656 75.087096) (xy 132.150011 75.169311) (xy 132.322241 75.225271) (xy 132.393786 75.236602) - (xy 132.501101 75.2536) (xy 132.501104 75.2536) (xy 132.682199 75.2536) (xy 132.771627 75.239435) - (xy 132.861059 75.225271) (xy 133.033289 75.169311) (xy 133.194644 75.087096) (xy 133.341151 74.980653) - (xy 133.469203 74.852601) (xy 133.575646 74.706094) (xy 133.657861 74.544739) (xy 133.713821 74.372509) - (xy 133.74215 74.193646) (xy 133.74215 74.012554) (xy 133.74215 74.01255) (xy 133.98115 74.01255) - (xy 133.98115 74.193649) (xy 134.009478 74.372506) (xy 134.065438 74.544737) (xy 134.104456 74.621315) - (xy 134.147654 74.706094) (xy 134.254097 74.852601) (xy 134.382149 74.980653) (xy 134.528656 75.087096) - (xy 134.690011 75.169311) (xy 134.862241 75.225271) (xy 134.933786 75.236602) (xy 135.041101 75.2536) - (xy 135.041104 75.2536) (xy 135.222199 75.2536) (xy 135.311627 75.239435) (xy 135.401059 75.225271) - (xy 135.573289 75.169311) (xy 135.734644 75.087096) (xy 135.881151 74.980653) (xy 136.009203 74.852601) - (xy 136.115646 74.706094) (xy 136.197861 74.544739) (xy 136.253821 74.372509) (xy 136.28215 74.193646) - (xy 136.28215 74.012554) (xy 136.28215 74.01255) (xy 136.52115 74.01255) (xy 136.52115 74.193649) - (xy 136.549478 74.372506) (xy 136.605438 74.544737) (xy 136.644456 74.621315) (xy 136.687654 74.706094) - (xy 136.794097 74.852601) (xy 136.922149 74.980653) (xy 137.068656 75.087096) (xy 137.230011 75.169311) - (xy 137.402241 75.225271) (xy 137.473786 75.236602) (xy 137.581101 75.2536) (xy 137.581104 75.2536) - (xy 137.762199 75.2536) (xy 137.851627 75.239435) (xy 137.941059 75.225271) (xy 138.113289 75.169311) - (xy 138.274644 75.087096) (xy 138.421151 74.980653) (xy 138.549203 74.852601) (xy 138.655646 74.706094) - (xy 138.737861 74.544739) (xy 138.793821 74.372509) (xy 138.82215 74.193646) (xy 138.82215 74.012554) - (xy 138.82215 74.01255) (xy 139.06115 74.01255) (xy 139.06115 74.193649) (xy 139.089478 74.372506) - (xy 139.145438 74.544737) (xy 139.184456 74.621315) (xy 139.227654 74.706094) (xy 139.334097 74.852601) - (xy 139.462149 74.980653) (xy 139.608656 75.087096) (xy 139.770011 75.169311) (xy 139.942241 75.225271) - (xy 140.013786 75.236602) (xy 140.121101 75.2536) (xy 140.121104 75.2536) (xy 140.302199 75.2536) - (xy 140.391627 75.239435) (xy 140.481059 75.225271) (xy 140.653289 75.169311) (xy 140.814644 75.087096) - (xy 140.961151 74.980653) (xy 141.089203 74.852601) (xy 141.195646 74.706094) (xy 141.277861 74.544739) - (xy 141.333821 74.372509) (xy 141.36215 74.193646) (xy 141.36215 74.012554) (xy 141.36215 74.01255) - (xy 141.60115 74.01255) (xy 141.60115 74.193649) (xy 141.629478 74.372506) (xy 141.685438 74.544737) - (xy 141.724456 74.621315) (xy 141.767654 74.706094) (xy 141.874097 74.852601) (xy 142.002149 74.980653) - (xy 142.148656 75.087096) (xy 142.310011 75.169311) (xy 142.482241 75.225271) (xy 142.553786 75.236602) - (xy 142.661101 75.2536) (xy 142.661104 75.2536) (xy 142.842199 75.2536) (xy 142.931627 75.239435) - (xy 143.021059 75.225271) (xy 143.193289 75.169311) (xy 143.354644 75.087096) (xy 143.501151 74.980653) - (xy 143.629203 74.852601) (xy 143.735646 74.706094) (xy 143.817861 74.544739) (xy 143.873821 74.372509) - (xy 143.90215 74.193646) (xy 143.90215 74.012554) (xy 143.90215 74.01255) (xy 144.14115 74.01255) - (xy 144.14115 74.193649) (xy 144.169478 74.372506) (xy 144.225438 74.544737) (xy 144.264456 74.621315) - (xy 144.307654 74.706094) (xy 144.414097 74.852601) (xy 144.542149 74.980653) (xy 144.688656 75.087096) - (xy 144.850011 75.169311) (xy 145.022241 75.225271) (xy 145.093786 75.236602) (xy 145.201101 75.2536) - (xy 145.201104 75.2536) (xy 145.382199 75.2536) (xy 145.471627 75.239435) (xy 145.561059 75.225271) - (xy 145.733289 75.169311) (xy 145.894644 75.087096) (xy 146.041151 74.980653) (xy 146.169203 74.852601) - (xy 146.275646 74.706094) (xy 146.357861 74.544739) (xy 146.413821 74.372509) (xy 146.44215 74.193646) - (xy 146.44215 74.012554) (xy 146.44215 74.01255) (xy 146.68115 74.01255) (xy 146.68115 74.193649) - (xy 146.709478 74.372506) (xy 146.765438 74.544737) (xy 146.804456 74.621315) (xy 146.847654 74.706094) - (xy 146.954097 74.852601) (xy 147.082149 74.980653) (xy 147.228656 75.087096) (xy 147.390011 75.169311) - (xy 147.562241 75.225271) (xy 147.633786 75.236602) (xy 147.741101 75.2536) (xy 147.741104 75.2536) - (xy 147.922199 75.2536) (xy 148.011627 75.239435) (xy 148.101059 75.225271) (xy 148.273289 75.169311) - (xy 148.434644 75.087096) (xy 148.581151 74.980653) (xy 148.709203 74.852601) (xy 148.815646 74.706094) - (xy 148.897861 74.544739) (xy 148.953821 74.372509) (xy 148.98215 74.193646) (xy 148.98215 74.012554) - (xy 148.98215 74.01255) (xy 149.22115 74.01255) (xy 149.22115 74.193649) (xy 149.249478 74.372506) - (xy 149.305438 74.544737) (xy 149.344456 74.621315) (xy 149.387654 74.706094) (xy 149.494097 74.852601) - (xy 149.622149 74.980653) (xy 149.768656 75.087096) (xy 149.930011 75.169311) (xy 150.102241 75.225271) - (xy 150.173786 75.236602) (xy 150.281101 75.2536) (xy 150.281104 75.2536) (xy 150.462199 75.2536) - (xy 150.551627 75.239435) (xy 150.641059 75.225271) (xy 150.813289 75.169311) (xy 150.813292 75.169309) - (xy 150.813296 75.169308) (xy 150.917258 75.116335) (xy 150.964177 75.092429) (xy 150.96418 75.092428) - (xy 150.967816 75.090574) (xy 150.974644 75.087096) (xy 151.121151 74.980653) (xy 151.249203 74.852601) - (xy 151.355646 74.706094) (xy 151.437861 74.544739) (xy 151.442612 74.530118) (xy 151.478574 74.480617) - (xy 151.536765 74.461708) (xy 151.594956 74.480614) (xy 151.630921 74.530113) (xy 151.630922 74.530115) + (xy 112.619788 80.641753) (xy 112.526893 80.824072) (xy 112.463659 81.018685) (xy 112.45504 81.073099) + (xy 112.111043 81.073099) (xy 112.105623 81.045849) (xy 112.033972 80.872869) (xy 112.03397 80.872867) + (xy 112.033968 80.872861) (xy 111.96553 80.770439) (xy 111.929952 80.717192) (xy 111.797558 80.584798) + (xy 111.743854 80.548914) (xy 111.641888 80.480781) (xy 111.641879 80.480777) (xy 111.468899 80.409126) + (xy 111.285268 80.3726) (xy 111.285266 80.3726) (xy 111.098034 80.3726) (xy 111.098031 80.3726) + (xy 110.9144 80.409126) (xy 110.74142 80.480777) (xy 110.741411 80.480781) (xy 110.585742 80.584798) + (xy 110.585738 80.584801) (xy 110.453351 80.717188) (xy 110.453348 80.717192) (xy 110.349331 80.872861) + (xy 110.349327 80.87287) (xy 110.277676 81.04585) (xy 110.24115 81.229481) (xy 109.602149 81.229481) + (xy 109.565623 81.045849) (xy 109.493972 80.872869) (xy 109.49397 80.872867) (xy 109.493968 80.872861) + (xy 109.42553 80.770439) (xy 109.389952 80.717192) (xy 109.257558 80.584798) (xy 109.203854 80.548914) + (xy 109.101888 80.480781) (xy 109.101879 80.480777) (xy 108.928899 80.409126) (xy 108.745268 80.3726) + (xy 108.745266 80.3726) (xy 108.558034 80.3726) (xy 108.558031 80.3726) (xy 108.3744 80.409126) + (xy 108.20142 80.480777) (xy 108.201411 80.480781) (xy 108.045742 80.584798) (xy 108.045738 80.584801) + (xy 107.913351 80.717188) (xy 107.913348 80.717192) (xy 107.809331 80.872861) (xy 107.809327 80.87287) + (xy 107.737676 81.04585) (xy 107.70115 81.229481) (xy 107.70115 81.416718) (xy 107.737676 81.600349) + (xy 107.737677 81.600351) (xy 107.757662 81.6486) (xy 107.787865 81.721514) (xy 107.792666 81.782511) + (xy 107.760696 81.83468) (xy 107.704169 81.858095) (xy 107.696401 81.8584) (xy 107.595141 81.8584) + (xy 107.525017 81.877189) (xy 107.480559 81.889102) (xy 107.377841 81.948407) (xy 107.293957 82.032291) + (xy 107.234652 82.135009) (xy 107.234651 82.135014) (xy 107.20395 82.249591) (xy 106.325968 82.249591) + (xy 106.388901 82.237073) (xy 106.561881 82.165422) (xy 106.561884 82.165419) (xy 106.561888 82.165418) + (xy 106.568819 82.160787) (xy 106.61789 82.127997) (xy 106.717558 82.061402) (xy 106.849952 81.929008) + (xy 106.943486 81.789025) (xy 106.953968 81.773338) (xy 106.953969 81.773334) (xy 106.953972 81.773331) + (xy 107.025623 81.600351) (xy 107.06215 81.416716) (xy 107.06215 81.229484) (xy 107.025623 81.045849) + (xy 106.953972 80.872869) (xy 106.95397 80.872867) (xy 106.953968 80.872861) (xy 106.88553 80.770439) + (xy 106.849952 80.717192) (xy 106.717558 80.584798) (xy 106.663854 80.548914) (xy 106.561888 80.480781) + (xy 106.561879 80.480777) (xy 106.388899 80.409126) (xy 106.205268 80.3726) (xy 106.205266 80.3726) + (xy 106.018034 80.3726) (xy 106.018031 80.3726) (xy 105.8344 80.409126) (xy 105.66142 80.480777) + (xy 105.661411 80.480781) (xy 105.505742 80.584798) (xy 105.505738 80.584801) (xy 105.373351 80.717188) + (xy 105.373348 80.717192) (xy 105.269331 80.872861) (xy 105.269327 80.87287) (xy 105.197676 81.04585) + (xy 105.16115 81.229481) (xy 80.802766 81.229481) (xy 80.802194 80.663491) (xy 102.42555 80.663491) + (xy 102.42555 80.782109) (xy 102.450644 80.875761) (xy 102.456252 80.89669) (xy 102.515557 80.999408) + (xy 102.515559 80.99941) (xy 102.515561 80.999413) (xy 102.599437 81.083289) (xy 102.599439 81.08329) + (xy 102.599441 81.083292) (xy 102.70216 81.142597) (xy 102.702161 81.142597) (xy 102.702164 81.142599) + (xy 102.816741 81.1733) (xy 102.816743 81.1733) (xy 102.935357 81.1733) (xy 102.935359 81.1733) + (xy 103.049936 81.142599) (xy 103.049938 81.142597) (xy 103.04994 81.142597) (xy 103.056372 81.138884) + (xy 103.152658 81.083292) (xy 103.152658 81.083291) (xy 103.152663 81.083289) (xy 103.236539 80.999413) + (xy 103.287331 80.91144) (xy 103.295847 80.89669) (xy 103.295847 80.896688) (xy 103.295849 80.896686) + (xy 103.32655 80.782109) (xy 103.32655 80.663491) (xy 103.295849 80.548914) (xy 103.295847 80.548911) + (xy 103.295847 80.548909) (xy 103.236542 80.446191) (xy 103.23654 80.446189) (xy 103.236539 80.446187) + (xy 103.152663 80.362311) (xy 103.15266 80.362309) (xy 103.152658 80.362307) (xy 103.049939 80.303002) + (xy 103.04994 80.303002) (xy 103.027085 80.296878) (xy 102.935359 80.2723) (xy 102.816741 80.2723) + (xy 102.746617 80.291089) (xy 102.702159 80.303002) (xy 102.599441 80.362307) (xy 102.515557 80.446191) + (xy 102.456252 80.548909) (xy 102.456251 80.548914) (xy 102.42555 80.663491) (xy 80.802194 80.663491) + (xy 80.802188 80.657102) (xy 80.80012 78.611791) (xy 96.18215 78.611791) (xy 96.18215 78.730409) + (xy 96.197162 78.786433) (xy 96.212852 78.84499) (xy 96.272157 78.947708) (xy 96.272159 78.94771) + (xy 96.272161 78.947713) (xy 96.356037 79.031589) (xy 96.356039 79.03159) (xy 96.356041 79.031592) + (xy 96.45876 79.090897) (xy 96.458761 79.090897) (xy 96.458764 79.090899) (xy 96.573341 79.1216) + (xy 96.573343 79.1216) (xy 96.691957 79.1216) (xy 96.691959 79.1216) (xy 96.806536 79.090899) (xy 96.806538 79.090897) + (xy 96.80654 79.090897) (xy 96.909258 79.031592) (xy 96.909258 79.031591) (xy 96.909263 79.031589) + (xy 96.969861 78.970991) (xy 166.34755 78.970991) (xy 166.34755 79.089609) (xy 166.374624 79.190651) + (xy 166.378252 79.20419) (xy 166.437557 79.306908) (xy 166.437559 79.30691) (xy 166.437561 79.306913) + (xy 166.521437 79.390789) (xy 166.521439 79.39079) (xy 166.521441 79.390792) (xy 166.62416 79.450097) + (xy 166.624161 79.450097) (xy 166.624164 79.450099) (xy 166.738741 79.4808) (xy 166.738743 79.4808) + (xy 166.857357 79.4808) (xy 166.857359 79.4808) (xy 166.971936 79.450099) (xy 166.971938 79.450097) + (xy 166.97194 79.450097) (xy 167.074658 79.390792) (xy 167.074658 79.390791) (xy 167.074663 79.390789) + (xy 167.158539 79.306913) (xy 167.217849 79.204186) (xy 167.24855 79.089609) (xy 167.24855 78.970991) + (xy 167.217849 78.856414) (xy 167.217847 78.856411) (xy 167.217847 78.856409) (xy 167.177446 78.786433) + (xy 167.177445 78.786432) (xy 167.15854 78.753689) (xy 167.158539 78.753687) (xy 167.074663 78.669811) + (xy 167.07466 78.669809) (xy 167.074658 78.669807) (xy 166.971939 78.610502) (xy 166.97194 78.610502) + (xy 166.952906 78.605402) (xy 166.857359 78.5798) (xy 166.738741 78.5798) (xy 166.668617 78.598589) + (xy 166.624159 78.610502) (xy 166.521441 78.669807) (xy 166.437557 78.753691) (xy 166.378252 78.856409) + (xy 166.378251 78.856414) (xy 166.34755 78.970991) (xy 96.969861 78.970991) (xy 96.993139 78.947713) + (xy 97.01179 78.915409) (xy 97.012026 78.915001) (xy 97.012027 78.914999) (xy 97.052447 78.84499) + (xy 97.052447 78.844988) (xy 97.052449 78.844986) (xy 97.08315 78.730409) (xy 97.08315 78.611791) + (xy 97.052449 78.497214) (xy 97.052447 78.497211) (xy 97.052447 78.497209) (xy 96.993142 78.394491) + (xy 96.99314 78.394489) (xy 96.993139 78.394487) (xy 96.909263 78.310611) (xy 96.90926 78.310609) + (xy 96.909258 78.310607) (xy 96.806539 78.251302) (xy 96.80654 78.251302) (xy 96.793001 78.247674) + (xy 96.691959 78.2206) (xy 96.573341 78.2206) (xy 96.503217 78.239389) (xy 96.458759 78.251302) + (xy 96.356041 78.310607) (xy 96.272157 78.394491) (xy 96.212852 78.497209) (xy 96.212851 78.497214) + (xy 96.18215 78.611791) (xy 80.80012 78.611791) (xy 80.800114 78.605402) (xy 80.799512 78.009991) + (xy 97.70765 78.009991) (xy 97.70765 78.128609) (xy 97.732299 78.2206) (xy 97.738352 78.24319) (xy 97.797657 78.345908) + (xy 97.797659 78.34591) (xy 97.797661 78.345913) (xy 97.881537 78.429789) (xy 97.881539 78.42979) + (xy 97.881541 78.429792) (xy 97.98426 78.489097) (xy 97.984261 78.489097) (xy 97.984264 78.489099) + (xy 98.098841 78.5198) (xy 98.098843 78.5198) (xy 98.217457 78.5198) (xy 98.217459 78.5198) (xy 98.332036 78.489099) + (xy 98.332038 78.489097) (xy 98.33204 78.489097) (xy 98.434758 78.429792) (xy 98.434758 78.429791) + (xy 98.434763 78.429789) (xy 98.518639 78.345913) (xy 98.54695 78.296878) (xy 98.577947 78.24319) + (xy 98.577947 78.243188) (xy 98.577949 78.243186) (xy 98.60865 78.128609) (xy 98.60865 78.009991) + (xy 98.577949 77.895414) (xy 98.577947 77.895411) (xy 98.577947 77.895409) (xy 98.534468 77.820102) + (xy 98.518642 77.792691) (xy 98.51864 77.792689) (xy 98.518639 77.792687) (xy 98.503043 77.777091) + (xy 162.88285 77.777091) (xy 162.88285 77.895709) (xy 162.903614 77.973199) (xy 162.913552 78.01029) + (xy 162.972857 78.113008) (xy 162.972859 78.11301) (xy 162.972861 78.113013) (xy 163.056737 78.196889) + (xy 163.056739 78.19689) (xy 163.056741 78.196892) (xy 163.15946 78.256197) (xy 163.159461 78.256197) + (xy 163.159464 78.256199) (xy 163.274041 78.2869) (xy 163.274043 78.2869) (xy 163.392657 78.2869) + (xy 163.392659 78.2869) (xy 163.507236 78.256199) (xy 163.507238 78.256197) (xy 163.50724 78.256197) + (xy 163.609958 78.196892) (xy 163.609958 78.196891) (xy 163.609963 78.196889) (xy 163.693839 78.113013) + (xy 163.706231 78.09155) (xy 163.753147 78.01029) (xy 163.753147 78.010288) (xy 163.753149 78.010286) + (xy 163.78385 77.895709) (xy 163.78385 77.777091) (xy 163.753149 77.662514) (xy 163.753147 77.662511) + (xy 163.753147 77.662509) (xy 163.693842 77.559791) (xy 163.69384 77.559789) (xy 163.693839 77.559787) + (xy 163.609963 77.475911) (xy 163.60996 77.475909) (xy 163.609958 77.475907) (xy 163.507239 77.416602) + (xy 163.50724 77.416602) (xy 163.493701 77.412974) (xy 163.392659 77.3859) (xy 163.274041 77.3859) + (xy 163.203917 77.404689) (xy 163.159459 77.416602) (xy 163.056741 77.475907) (xy 162.972857 77.559791) + (xy 162.913552 77.662509) (xy 162.913551 77.662514) (xy 162.88285 77.777091) (xy 98.503043 77.777091) + (xy 98.434763 77.708811) (xy 98.43476 77.708809) (xy 98.434758 77.708807) (xy 98.332039 77.649502) + (xy 98.33204 77.649502) (xy 98.318501 77.645874) (xy 98.217459 77.6188) (xy 98.098841 77.6188) (xy 98.028717 77.637589) + (xy 97.984259 77.649502) (xy 97.881541 77.708807) (xy 97.797657 77.792691) (xy 97.738352 77.895409) + (xy 97.738351 77.895414) (xy 97.70765 78.009991) (xy 80.799512 78.009991) (xy 80.799506 78.003602) + (xy 80.798613 77.120791) (xy 101.06525 77.120791) (xy 101.06525 77.239409) (xy 101.087675 77.323099) + (xy 101.095952 77.35399) (xy 101.155257 77.456708) (xy 101.155259 77.45671) (xy 101.155261 77.456713) + (xy 101.239137 77.540589) (xy 101.239139 77.54059) (xy 101.239141 77.540592) (xy 101.34186 77.599897) + (xy 101.341861 77.599897) (xy 101.341864 77.599899) (xy 101.456441 77.6306) (xy 101.456443 77.6306) + (xy 101.575057 77.6306) (xy 101.575059 77.6306) (xy 101.689636 77.599899) (xy 101.689638 77.599897) + (xy 101.68964 77.599897) (xy 101.792358 77.540592) (xy 101.792358 77.540591) (xy 101.792363 77.540589) + (xy 101.876239 77.456713) (xy 101.899398 77.416601) (xy 101.935547 77.35399) (xy 101.935547 77.353988) + (xy 101.935549 77.353986) (xy 101.96625 77.239409) (xy 101.96625 77.120791) (xy 101.935549 77.006214) + (xy 101.935547 77.006211) (xy 101.935547 77.006209) (xy 101.876242 76.903491) (xy 101.87624 76.903489) + (xy 101.876239 76.903487) (xy 101.792363 76.819611) (xy 101.792356 76.819607) (xy 101.689638 76.760302) + (xy 101.689637 76.760301) (xy 101.689636 76.760301) (xy 101.620567 76.741794) (xy 173.36615 76.741794) + (xy 173.36615 76.904405) (xy 173.397874 77.06389) (xy 173.4601 77.214118) (xy 173.460101 77.21412) + (xy 173.460102 77.214121) (xy 173.550442 77.349325) (xy 173.665425 77.464308) (xy 173.800629 77.554648) + (xy 173.80063 77.554648) (xy 173.800631 77.554649) (xy 173.813045 77.559791) (xy 173.950861 77.616876) + (xy 174.110345 77.6486) (xy 174.110346 77.6486) (xy 174.272954 77.6486) (xy 174.272955 77.6486) + (xy 174.432439 77.616876) (xy 174.582671 77.554648) (xy 174.717875 77.464308) (xy 174.832858 77.349325) + (xy 174.923198 77.214121) (xy 174.985426 77.063889) (xy 175.01715 76.904405) (xy 175.01715 76.741795) + (xy 174.985426 76.582311) (xy 174.923198 76.432079) (xy 174.832858 76.296875) (xy 174.717875 76.181892) + (xy 174.714166 76.179414) (xy 174.582668 76.09155) (xy 174.43244 76.029324) (xy 174.272955 75.9976) + (xy 174.110345 75.9976) (xy 174.110344 75.9976) (xy 173.950859 76.029324) (xy 173.800631 76.09155) + (xy 173.665428 76.181889) (xy 173.550439 76.296878) (xy 173.4601 76.432081) (xy 173.397874 76.582309) + (xy 173.36615 76.741794) (xy 101.620567 76.741794) (xy 101.575059 76.7296) (xy 101.456441 76.7296) + (xy 101.386317 76.748389) (xy 101.341859 76.760302) (xy 101.239141 76.819607) (xy 101.155257 76.903491) + (xy 101.095952 77.006209) (xy 101.095951 77.006214) (xy 101.06525 77.120791) (xy 80.798613 77.120791) + (xy 80.798607 77.114402) (xy 80.7969 75.425991) (xy 101.52595 75.425991) (xy 101.52595 75.544609) + (xy 101.529223 75.556824) (xy 101.556652 75.65919) (xy 101.615957 75.761908) (xy 101.615959 75.76191) + (xy 101.615961 75.761913) (xy 101.699837 75.845789) (xy 101.699839 75.84579) (xy 101.699841 75.845792) + (xy 101.80256 75.905097) (xy 101.802561 75.905097) (xy 101.802564 75.905099) (xy 101.917141 75.9358) + (xy 101.917143 75.9358) (xy 102.035757 75.9358) (xy 102.035759 75.9358) (xy 102.150336 75.905099) + (xy 102.150338 75.905097) (xy 102.15034 75.905097) (xy 102.211145 75.869991) (xy 165.58945 75.869991) + (xy 165.58945 75.988609) (xy 165.597688 76.019352) (xy 165.620152 76.10319) (xy 165.679457 76.205908) + (xy 165.679459 76.20591) (xy 165.679461 76.205913) (xy 165.763337 76.289789) (xy 165.763339 76.28979) + (xy 165.763341 76.289792) (xy 165.86606 76.349097) (xy 165.866061 76.349097) (xy 165.866064 76.349099) + (xy 165.980641 76.3798) (xy 165.980643 76.3798) (xy 166.099257 76.3798) (xy 166.099259 76.3798) + (xy 166.213836 76.349099) (xy 166.213838 76.349097) (xy 166.21384 76.349097) (xy 166.316558 76.289792) + (xy 166.316558 76.289791) (xy 166.316563 76.289789) (xy 166.400439 76.205913) (xy 166.414308 76.181892) + (xy 166.459747 76.10319) (xy 166.459747 76.103188) (xy 166.459749 76.103186) (xy 166.49045 75.988609) + (xy 166.49045 75.869991) (xy 166.481214 75.835522) (xy 166.484417 75.774421) (xy 166.522922 75.726871) + (xy 166.576841 75.7109) (xy 166.586357 75.7109) (xy 166.586359 75.7109) (xy 166.700936 75.680199) + (xy 166.700938 75.680197) (xy 166.70094 75.680197) (xy 166.803658 75.620892) (xy 166.803658 75.620891) + (xy 166.803663 75.620889) (xy 166.887539 75.537013) (xy 166.901449 75.51292) (xy 166.946847 75.43429) + (xy 166.946847 75.434288) (xy 166.946849 75.434286) (xy 166.97755 75.319709) (xy 166.97755 75.201091) + (xy 166.946849 75.086514) (xy 166.946847 75.086511) (xy 166.946847 75.086509) (xy 166.887542 74.983791) + (xy 166.88754 74.983789) (xy 166.887539 74.983787) (xy 166.803663 74.899911) (xy 166.80366 74.899909) + (xy 166.803658 74.899907) (xy 166.700939 74.840602) (xy 166.70094 74.840602) (xy 166.687401 74.836974) + (xy 166.586359 74.8099) (xy 166.467741 74.8099) (xy 166.397617 74.828689) (xy 166.353159 74.840602) + (xy 166.250441 74.899907) (xy 166.166557 74.983791) (xy 166.107252 75.086509) (xy 166.107251 75.086514) + (xy 166.07655 75.201091) (xy 166.07655 75.319709) (xy 166.085786 75.354177) (xy 166.082583 75.415279) + (xy 166.044078 75.462829) (xy 165.990159 75.4788) (xy 165.980641 75.4788) (xy 165.910517 75.497589) + (xy 165.866059 75.509502) (xy 165.763341 75.568807) (xy 165.679457 75.652691) (xy 165.620152 75.755409) + (xy 165.615058 75.774421) (xy 165.58945 75.869991) (xy 102.211145 75.869991) (xy 102.253058 75.845792) + (xy 102.253058 75.845791) (xy 102.253063 75.845789) (xy 102.336939 75.761913) (xy 102.366392 75.7109) + (xy 102.396247 75.65919) (xy 102.396247 75.659188) (xy 102.396249 75.659186) (xy 102.42695 75.544609) + (xy 102.42695 75.425991) (xy 102.396249 75.311414) (xy 102.396247 75.311411) (xy 102.396247 75.311409) + (xy 102.336942 75.208691) (xy 102.33694 75.208689) (xy 102.336939 75.208687) (xy 102.253063 75.124811) + (xy 102.25306 75.124809) (xy 102.253058 75.124807) (xy 102.150339 75.065502) (xy 102.15034 75.065502) + (xy 102.135781 75.061601) (xy 102.035759 75.0348) (xy 101.917141 75.0348) (xy 101.847017 75.053589) + (xy 101.802559 75.065502) (xy 101.699841 75.124807) (xy 101.615957 75.208691) (xy 101.556652 75.311409) + (xy 101.556651 75.311414) (xy 101.52595 75.425991) (xy 80.7969 75.425991) (xy 80.796894 75.419602) + (xy 80.795513 74.053991) (xy 97.63215 74.053991) (xy 97.63215 74.172609) (xy 97.659224 74.273651) + (xy 97.662852 74.28719) (xy 97.722157 74.389908) (xy 97.722159 74.38991) (xy 97.722161 74.389913) + (xy 97.806037 74.473789) (xy 97.806039 74.47379) (xy 97.806041 74.473792) (xy 97.90876 74.533097) + (xy 97.908761 74.533097) (xy 97.908764 74.533099) (xy 98.023341 74.5638) (xy 98.023343 74.5638) + (xy 98.141957 74.5638) (xy 98.141959 74.5638) (xy 98.256536 74.533099) (xy 98.256538 74.533097) + (xy 98.25654 74.533097) (xy 98.359258 74.473792) (xy 98.359258 74.473791) (xy 98.359263 74.473789) + (xy 98.443139 74.389913) (xy 98.443142 74.389908) (xy 98.502447 74.28719) (xy 98.502447 74.287188) + (xy 98.502449 74.287186) (xy 98.53315 74.172609) (xy 98.53315 74.053991) (xy 98.502449 73.939414) + (xy 98.502447 73.939411) (xy 98.502447 73.939409) (xy 98.443142 73.836691) (xy 98.44314 73.836689) + (xy 98.443139 73.836687) (xy 98.359263 73.752811) (xy 98.35926 73.752809) (xy 98.359258 73.752807) + (xy 98.256539 73.693502) (xy 98.25654 73.693502) (xy 98.243001 73.689874) (xy 98.141959 73.6628) + (xy 98.023341 73.6628) (xy 97.953217 73.681589) (xy 97.908759 73.693502) (xy 97.806041 73.752807) + (xy 97.722157 73.836691) (xy 97.662852 73.939409) (xy 97.662851 73.939414) (xy 97.63215 74.053991) + (xy 80.795513 74.053991) (xy 80.795507 74.047602) (xy 80.794689 73.238272) (xy 106.19115 73.238272) + (xy 106.19115 74.967927) (xy 106.199882 75.01182) (xy 106.199883 75.011822) (xy 106.233146 75.061604) + (xy 106.282928 75.094867) (xy 106.293977 75.097064) (xy 106.326822 75.103599) (xy 106.326828 75.103599) + (xy 106.32683 75.1036) (xy 106.326831 75.1036) (xy 108.056469 75.1036) (xy 108.05647 75.1036) (xy 108.056471 75.103599) + (xy 108.056477 75.103599) (xy 108.078273 75.099262) (xy 108.100372 75.094867) (xy 108.150154 75.061604) + (xy 108.183417 75.011822) (xy 108.19215 74.96792) (xy 108.19215 74.004556) (xy 108.73115 74.004556) + (xy 108.73115 74.201643) (xy 108.769599 74.394934) (xy 108.769599 74.394936) (xy 108.845017 74.577013) + (xy 108.862448 74.6031) (xy 108.954511 74.740882) (xy 109.093868 74.880239) (xy 109.257736 74.989732) + (xy 109.439815 75.065151) (xy 109.633109 75.1036) (xy 109.63311 75.1036) (xy 109.83019 75.1036) + (xy 109.830191 75.1036) (xy 110.023485 75.065151) (xy 110.205564 74.989732) (xy 110.369432 74.880239) + (xy 110.508789 74.740882) (xy 110.618282 74.577014) (xy 110.693701 74.394935) (xy 110.73215 74.201641) + (xy 110.73215 74.004559) (xy 110.732149 74.004556) (xy 111.27115 74.004556) (xy 111.27115 74.201643) + (xy 111.309599 74.394934) (xy 111.309599 74.394936) (xy 111.385017 74.577013) (xy 111.402448 74.6031) + (xy 111.494511 74.740882) (xy 111.633868 74.880239) (xy 111.797736 74.989732) (xy 111.979815 75.065151) + (xy 112.173109 75.1036) (xy 112.17311 75.1036) (xy 112.37019 75.1036) (xy 112.370191 75.1036) (xy 112.563485 75.065151) + (xy 112.745564 74.989732) (xy 112.909432 74.880239) (xy 113.048789 74.740882) (xy 113.158282 74.577014) + (xy 113.233701 74.394935) (xy 113.27215 74.201641) (xy 113.27215 74.004559) (xy 113.272149 74.004556) + (xy 113.81115 74.004556) (xy 113.81115 74.201643) (xy 113.849599 74.394934) (xy 113.849599 74.394936) + (xy 113.925017 74.577013) (xy 113.942448 74.6031) (xy 114.034511 74.740882) (xy 114.173868 74.880239) + (xy 114.337736 74.989732) (xy 114.519815 75.065151) (xy 114.713109 75.1036) (xy 114.71311 75.1036) + (xy 114.91019 75.1036) (xy 114.910191 75.1036) (xy 115.103485 75.065151) (xy 115.285564 74.989732) + (xy 115.449432 74.880239) (xy 115.588789 74.740882) (xy 115.698282 74.577014) (xy 115.773701 74.394935) + (xy 115.81215 74.201641) (xy 115.81215 74.004559) (xy 115.812149 74.004556) (xy 116.35115 74.004556) + (xy 116.35115 74.201643) (xy 116.389599 74.394934) (xy 116.389599 74.394936) (xy 116.465017 74.577013) + (xy 116.482448 74.6031) (xy 116.574511 74.740882) (xy 116.713868 74.880239) (xy 116.877736 74.989732) + (xy 117.059815 75.065151) (xy 117.253109 75.1036) (xy 117.25311 75.1036) (xy 117.45019 75.1036) + (xy 117.450191 75.1036) (xy 117.643485 75.065151) (xy 117.825564 74.989732) (xy 117.989432 74.880239) + (xy 118.128789 74.740882) (xy 118.238282 74.577014) (xy 118.313701 74.394935) (xy 118.35215 74.201641) + (xy 118.35215 74.004559) (xy 118.352149 74.004556) (xy 118.89115 74.004556) (xy 118.89115 74.201643) + (xy 118.929599 74.394934) (xy 118.929599 74.394936) (xy 119.005017 74.577013) (xy 119.022448 74.6031) + (xy 119.114511 74.740882) (xy 119.253868 74.880239) (xy 119.417736 74.989732) (xy 119.599815 75.065151) + (xy 119.793109 75.1036) (xy 119.79311 75.1036) (xy 119.99019 75.1036) (xy 119.990191 75.1036) (xy 120.183485 75.065151) + (xy 120.365564 74.989732) (xy 120.529432 74.880239) (xy 120.668789 74.740882) (xy 120.778282 74.577014) + (xy 120.853701 74.394935) (xy 120.89215 74.201641) (xy 120.89215 74.004559) (xy 120.892149 74.004556) + (xy 121.43115 74.004556) (xy 121.43115 74.201643) (xy 121.469599 74.394934) (xy 121.469599 74.394936) + (xy 121.545017 74.577013) (xy 121.562448 74.6031) (xy 121.654511 74.740882) (xy 121.793868 74.880239) + (xy 121.957736 74.989732) (xy 122.139815 75.065151) (xy 122.333109 75.1036) (xy 122.33311 75.1036) + (xy 122.53019 75.1036) (xy 122.530191 75.1036) (xy 122.723485 75.065151) (xy 122.905564 74.989732) + (xy 123.069432 74.880239) (xy 123.208789 74.740882) (xy 123.318282 74.577014) (xy 123.393701 74.394935) + (xy 123.43215 74.201641) (xy 123.43215 74.004559) (xy 123.432149 74.004556) (xy 123.97115 74.004556) + (xy 123.97115 74.201643) (xy 124.009599 74.394934) (xy 124.009599 74.394936) (xy 124.085017 74.577013) + (xy 124.102448 74.6031) (xy 124.194511 74.740882) (xy 124.333868 74.880239) (xy 124.497736 74.989732) + (xy 124.679815 75.065151) (xy 124.873109 75.1036) (xy 124.87311 75.1036) (xy 125.07019 75.1036) + (xy 125.070191 75.1036) (xy 125.263485 75.065151) (xy 125.445564 74.989732) (xy 125.609432 74.880239) + (xy 125.748789 74.740882) (xy 125.858282 74.577014) (xy 125.933701 74.394935) (xy 125.97215 74.201641) + (xy 125.97215 74.004559) (xy 125.972149 74.004556) (xy 126.51115 74.004556) (xy 126.51115 74.201643) + (xy 126.549599 74.394934) (xy 126.549599 74.394936) (xy 126.625017 74.577013) (xy 126.642448 74.6031) + (xy 126.734511 74.740882) (xy 126.873868 74.880239) (xy 127.037736 74.989732) (xy 127.219815 75.065151) + (xy 127.413109 75.1036) (xy 127.41311 75.1036) (xy 127.61019 75.1036) (xy 127.610191 75.1036) (xy 127.803485 75.065151) + (xy 127.985564 74.989732) (xy 128.149432 74.880239) (xy 128.288789 74.740882) (xy 128.398282 74.577014) + (xy 128.473701 74.394935) (xy 128.51215 74.201641) (xy 128.51215 74.004559) (xy 128.512149 74.004556) + (xy 129.05115 74.004556) (xy 129.05115 74.201643) (xy 129.089599 74.394934) (xy 129.089599 74.394936) + (xy 129.165017 74.577013) (xy 129.182448 74.6031) (xy 129.274511 74.740882) (xy 129.413868 74.880239) + (xy 129.577736 74.989732) (xy 129.759815 75.065151) (xy 129.953109 75.1036) (xy 129.95311 75.1036) + (xy 130.15019 75.1036) (xy 130.150191 75.1036) (xy 130.343485 75.065151) (xy 130.525564 74.989732) + (xy 130.689432 74.880239) (xy 130.828789 74.740882) (xy 130.938282 74.577014) (xy 131.013701 74.394935) + (xy 131.05215 74.201641) (xy 131.05215 74.004559) (xy 131.052149 74.004556) (xy 131.59115 74.004556) + (xy 131.59115 74.201643) (xy 131.629599 74.394934) (xy 131.629599 74.394936) (xy 131.705017 74.577013) + (xy 131.722448 74.6031) (xy 131.814511 74.740882) (xy 131.953868 74.880239) (xy 132.117736 74.989732) + (xy 132.299815 75.065151) (xy 132.493109 75.1036) (xy 132.49311 75.1036) (xy 132.69019 75.1036) + (xy 132.690191 75.1036) (xy 132.883485 75.065151) (xy 133.065564 74.989732) (xy 133.229432 74.880239) + (xy 133.368789 74.740882) (xy 133.478282 74.577014) (xy 133.553701 74.394935) (xy 133.59215 74.201641) + (xy 133.59215 74.004559) (xy 133.592149 74.004556) (xy 134.13115 74.004556) (xy 134.13115 74.201643) + (xy 134.169599 74.394934) (xy 134.169599 74.394936) (xy 134.245017 74.577013) (xy 134.262448 74.6031) + (xy 134.354511 74.740882) (xy 134.493868 74.880239) (xy 134.657736 74.989732) (xy 134.839815 75.065151) + (xy 135.033109 75.1036) (xy 135.03311 75.1036) (xy 135.23019 75.1036) (xy 135.230191 75.1036) (xy 135.423485 75.065151) + (xy 135.605564 74.989732) (xy 135.769432 74.880239) (xy 135.908789 74.740882) (xy 136.018282 74.577014) + (xy 136.093701 74.394935) (xy 136.13215 74.201641) (xy 136.13215 74.004559) (xy 136.132149 74.004556) + (xy 136.67115 74.004556) (xy 136.67115 74.201643) (xy 136.709599 74.394934) (xy 136.709599 74.394936) + (xy 136.785017 74.577013) (xy 136.802448 74.6031) (xy 136.894511 74.740882) (xy 137.033868 74.880239) + (xy 137.197736 74.989732) (xy 137.379815 75.065151) (xy 137.573109 75.1036) (xy 137.57311 75.1036) + (xy 137.77019 75.1036) (xy 137.770191 75.1036) (xy 137.963485 75.065151) (xy 138.145564 74.989732) + (xy 138.309432 74.880239) (xy 138.448789 74.740882) (xy 138.558282 74.577014) (xy 138.633701 74.394935) + (xy 138.67215 74.201641) (xy 138.67215 74.004559) (xy 138.672149 74.004556) (xy 139.21115 74.004556) + (xy 139.21115 74.201643) (xy 139.249599 74.394934) (xy 139.249599 74.394936) (xy 139.325017 74.577013) + (xy 139.342448 74.6031) (xy 139.434511 74.740882) (xy 139.573868 74.880239) (xy 139.737736 74.989732) + (xy 139.919815 75.065151) (xy 140.113109 75.1036) (xy 140.11311 75.1036) (xy 140.31019 75.1036) + (xy 140.310191 75.1036) (xy 140.503485 75.065151) (xy 140.685564 74.989732) (xy 140.849432 74.880239) + (xy 140.988789 74.740882) (xy 141.098282 74.577014) (xy 141.173701 74.394935) (xy 141.21215 74.201641) + (xy 141.21215 74.004559) (xy 141.212149 74.004556) (xy 141.75115 74.004556) (xy 141.75115 74.201643) + (xy 141.789599 74.394934) (xy 141.789599 74.394936) (xy 141.865017 74.577013) (xy 141.882448 74.6031) + (xy 141.974511 74.740882) (xy 142.113868 74.880239) (xy 142.277736 74.989732) (xy 142.459815 75.065151) + (xy 142.653109 75.1036) (xy 142.65311 75.1036) (xy 142.85019 75.1036) (xy 142.850191 75.1036) (xy 143.043485 75.065151) + (xy 143.225564 74.989732) (xy 143.389432 74.880239) (xy 143.528789 74.740882) (xy 143.638282 74.577014) + (xy 143.713701 74.394935) (xy 143.75215 74.201641) (xy 143.75215 74.004559) (xy 143.752149 74.004556) + (xy 144.29115 74.004556) (xy 144.29115 74.201643) (xy 144.329599 74.394934) (xy 144.329599 74.394936) + (xy 144.405017 74.577013) (xy 144.422448 74.6031) (xy 144.514511 74.740882) (xy 144.653868 74.880239) + (xy 144.817736 74.989732) (xy 144.999815 75.065151) (xy 145.193109 75.1036) (xy 145.19311 75.1036) + (xy 145.39019 75.1036) (xy 145.390191 75.1036) (xy 145.583485 75.065151) (xy 145.765564 74.989732) + (xy 145.929432 74.880239) (xy 146.068789 74.740882) (xy 146.178282 74.577014) (xy 146.253701 74.394935) + (xy 146.29215 74.201641) (xy 146.29215 74.004559) (xy 146.292149 74.004556) (xy 146.83115 74.004556) + (xy 146.83115 74.201643) (xy 146.869599 74.394934) (xy 146.869599 74.394936) (xy 146.945017 74.577013) + (xy 146.962448 74.6031) (xy 147.054511 74.740882) (xy 147.193868 74.880239) (xy 147.357736 74.989732) + (xy 147.539815 75.065151) (xy 147.733109 75.1036) (xy 147.73311 75.1036) (xy 147.93019 75.1036) + (xy 147.930191 75.1036) (xy 148.123485 75.065151) (xy 148.305564 74.989732) (xy 148.469432 74.880239) + (xy 148.608789 74.740882) (xy 148.718282 74.577014) (xy 148.793701 74.394935) (xy 148.83215 74.201641) + (xy 148.83215 74.004559) (xy 148.832149 74.004556) (xy 149.37115 74.004556) (xy 149.37115 74.201643) + (xy 149.409599 74.394934) (xy 149.409599 74.394936) (xy 149.485017 74.577013) (xy 149.502448 74.6031) + (xy 149.594511 74.740882) (xy 149.733868 74.880239) (xy 149.897736 74.989732) (xy 150.079815 75.065151) + (xy 150.273109 75.1036) (xy 150.27311 75.1036) (xy 150.47019 75.1036) (xy 150.470191 75.1036) (xy 150.663485 75.065151) + (xy 150.845564 74.989732) (xy 151.009432 74.880239) (xy 151.148789 74.740882) (xy 151.258282 74.577014) + (xy 151.333701 74.394935) (xy 151.368813 74.218415) (xy 151.39871 74.165032) (xy 151.454275 74.139416) + (xy 151.514285 74.151353) (xy 151.555817 74.196283) (xy 151.563692 74.222243) (xy 151.59489 74.419221) (xy 151.660554 74.621315) (xy 151.757026 74.810653) (xy 151.75703 74.810659) (xy 151.796378 74.864816) (xy 151.796379 74.864816) (xy 152.428687 74.232507) (xy 152.445725 74.296093) (xy 152.511551 74.410107) (xy 152.604643 74.503199) (xy 152.718657 74.569025) (xy 152.782239 74.586062) (xy 152.149932 75.218369) @@ -49261,22 +57313,93 @@ (xy 152.595528 75.419859) (xy 152.8054 75.4531) (xy 153.0179 75.4531) (xy 153.227771 75.419859) (xy 153.429865 75.354195) (xy 153.619206 75.25772) (xy 153.673366 75.21837) (xy 153.041058 74.586062) (xy 153.104643 74.569025) (xy 153.218657 74.503199) (xy 153.311749 74.410107) (xy 153.377575 74.296093) - (xy 153.394612 74.232508) (xy 154.02692 74.864816) (xy 154.06627 74.810656) (xy 154.162746 74.621313) - (xy 154.192377 74.530116) (xy 154.22834 74.480616) (xy 154.286531 74.461708) (xy 154.344722 74.480615) - (xy 154.380686 74.530113) (xy 154.385438 74.544737) (xy 154.424456 74.621315) (xy 154.467654 74.706094) - (xy 154.574097 74.852601) (xy 154.702149 74.980653) (xy 154.848656 75.087096) (xy 155.010011 75.169311) - (xy 155.182241 75.225271) (xy 155.253786 75.236602) (xy 155.361101 75.2536) (xy 155.361104 75.2536) - (xy 155.542199 75.2536) (xy 155.631627 75.239435) (xy 155.721059 75.225271) (xy 155.893289 75.169311) - (xy 156.054644 75.087096) (xy 156.201151 74.980653) (xy 156.329203 74.852601) (xy 156.435646 74.706094) - (xy 156.517861 74.544739) (xy 156.573821 74.372509) (xy 156.60215 74.193646) (xy 156.60215 74.012554) - (xy 156.60215 74.01255) (xy 156.581396 73.881516) (xy 156.573821 73.833691) (xy 156.517861 73.661461) - (xy 156.435646 73.500106) (xy 156.329203 73.353599) (xy 156.201151 73.225547) (xy 156.054644 73.119104) - (xy 156.054643 73.119103) (xy 156.054641 73.119102) (xy 155.893287 73.036888) (xy 155.721056 72.980928) - (xy 155.542199 72.9526) (xy 155.542196 72.9526) (xy 155.361104 72.9526) (xy 155.361101 72.9526) - (xy 155.182243 72.980928) (xy 155.010012 73.036888) (xy 154.848658 73.119102) (xy 154.775402 73.172325) - (xy 154.702149 73.225547) (xy 154.574097 73.353599) (xy 154.543625 73.39554) (xy 154.467652 73.500108) - (xy 154.385437 73.661464) (xy 154.385436 73.661466) (xy 154.380685 73.676088) (xy 154.344719 73.725586) - (xy 154.286528 73.744491) (xy 154.228338 73.725581) (xy 154.192377 73.676083) (xy 154.162746 73.584886) + (xy 153.394612 74.232508) (xy 154.02692 74.864816) (xy 154.06627 74.810656) (xy 154.162745 74.621315) + (xy 154.228409 74.419221) (xy 154.259607 74.222243) (xy 154.287384 74.167727) (xy 154.341901 74.139949) + (xy 154.402333 74.14952) (xy 154.445598 74.192785) (xy 154.454486 74.218415) (xy 154.489599 74.394936) + (xy 154.565017 74.577013) (xy 154.582448 74.6031) (xy 154.674511 74.740882) (xy 154.813868 74.880239) + (xy 154.977736 74.989732) (xy 155.159815 75.065151) (xy 155.353109 75.1036) (xy 155.35311 75.1036) + (xy 155.55019 75.1036) (xy 155.550191 75.1036) (xy 155.743485 75.065151) (xy 155.925564 74.989732) + (xy 156.089432 74.880239) (xy 156.228789 74.740882) (xy 156.338282 74.577014) (xy 156.413701 74.394935) + (xy 156.45215 74.201641) (xy 156.45215 74.133272) (xy 173.36615 74.133272) (xy 173.36615 75.512927) + (xy 173.374882 75.55682) (xy 173.374884 75.556824) (xy 173.407388 75.60547) (xy 173.408146 75.606604) + (xy 173.457928 75.639867) (xy 173.468977 75.642064) (xy 173.501822 75.648599) (xy 173.501828 75.648599) + (xy 173.50183 75.6486) (xy 173.501831 75.6486) (xy 174.881469 75.6486) (xy 174.88147 75.6486) (xy 174.881471 75.648599) + (xy 174.881477 75.648599) (xy 174.903273 75.644262) (xy 174.925372 75.639867) (xy 174.975154 75.606604) + (xy 175.008417 75.556822) (xy 175.010585 75.545924) (xy 195.366649 75.545924) (xy 195.373051 75.60547) + (xy 195.373053 75.605481) (xy 195.423296 75.740188) (xy 195.423297 75.74019) (xy 195.509457 75.855284) + (xy 195.509465 75.855292) (xy 195.624559 75.941452) (xy 195.624561 75.941453) (xy 195.759268 75.991696) + (xy 195.759279 75.991698) (xy 195.818826 75.9981) (xy 195.964129 75.9981) (xy 196.02232 76.017007) + (xy 196.058284 76.066507) (xy 196.058284 76.127693) (xy 196.02232 76.177193) (xy 196.019133 76.179414) + (xy 196.015428 76.181889) (xy 195.900439 76.296878) (xy 195.8101 76.432081) (xy 195.747874 76.582309) + (xy 195.71615 76.741794) (xy 195.71615 76.904405) (xy 195.747874 77.06389) (xy 195.8101 77.214118) + (xy 195.810101 77.21412) (xy 195.810102 77.214121) (xy 195.900442 77.349325) (xy 196.015425 77.464308) + (xy 196.150629 77.554648) (xy 196.15063 77.554648) (xy 196.150631 77.554649) (xy 196.163045 77.559791) + (xy 196.300861 77.616876) (xy 196.460345 77.6486) (xy 196.460346 77.6486) (xy 196.622954 77.6486) + (xy 196.622955 77.6486) (xy 196.782439 77.616876) (xy 196.932671 77.554648) (xy 197.067875 77.464308) + (xy 197.182858 77.349325) (xy 197.200382 77.323099) (xy 208.689418 77.323099) (xy 208.689419 77.3231) + (xy 209.733638 77.3231) (xy 209.700725 77.380107) (xy 209.66665 77.507274) (xy 209.66665 77.638926) + (xy 209.700725 77.766093) (xy 209.733638 77.8231) (xy 208.689419 77.8231) (xy 208.699891 77.889222) + (xy 208.765554 78.091315) (xy 208.862025 78.280652) (xy 208.986927 78.452564) (xy 209.137185 78.602822) + (xy 209.309097 78.727724) (xy 209.498436 78.824196) (xy 209.668478 78.879445) (xy 209.717978 78.915409) + (xy 209.736886 78.973599) (xy 209.717979 79.03179) (xy 209.668479 79.067754) (xy 209.637886 79.0726) + (xy 209.385128 79.0726) (xy 209.385126 79.072601) (xy 209.29135 79.087452) (xy 209.291345 79.087454) + (xy 209.178309 79.145049) (xy 209.088599 79.234759) (xy 209.031004 79.347795) (xy 209.01615 79.441578) + (xy 209.01615 80.704621) (xy 209.016151 80.704623) (xy 209.031002 80.798399) (xy 209.031004 80.798404) + (xy 209.0886 80.911442) (xy 209.178308 81.00115) (xy 209.291346 81.058746) (xy 209.385131 81.0736) + (xy 210.948168 81.073599) (xy 210.948171 81.073599) (xy 210.948172 81.073598) (xy 210.995061 81.066172) + (xy 211.041949 81.058747) (xy 211.041949 81.058746) (xy 211.041954 81.058746) (xy 211.154992 81.00115) + (xy 211.2447 80.911442) (xy 211.302296 80.798404) (xy 211.31715 80.704619) (xy 211.317149 79.441582) + (xy 211.317149 79.441581) (xy 211.317149 79.441578) (xy 211.317148 79.441576) (xy 211.302297 79.3478) + (xy 211.302296 79.347798) (xy 211.302296 79.347796) (xy 211.2447 79.234758) (xy 211.154992 79.14505) + (xy 211.041954 79.087454) (xy 211.041955 79.087454) (xy 210.948172 79.0726) (xy 210.695416 79.0726) + (xy 210.637225 79.053693) (xy 210.601261 79.004193) (xy 210.601261 78.943007) (xy 210.637225 78.893507) + (xy 210.664824 78.879445) (xy 210.834863 78.824196) (xy 211.024202 78.727724) (xy 211.196114 78.602822) + (xy 211.346372 78.452564) (xy 211.471274 78.280652) (xy 211.567745 78.091315) (xy 211.633408 77.889222) + (xy 211.643881 77.8231) (xy 210.599662 77.8231) (xy 210.632575 77.766093) (xy 210.66665 77.638926) + (xy 210.66665 77.507274) (xy 210.632575 77.380107) (xy 210.599662 77.3231) (xy 211.643881 77.3231) + (xy 211.643881 77.323099) (xy 211.633408 77.256977) (xy 211.567745 77.054884) (xy 211.471274 76.865547) + (xy 211.346372 76.693635) (xy 211.196114 76.543377) (xy 211.024202 76.418475) (xy 210.834865 76.322004) + (xy 210.632771 76.25634) (xy 210.4229 76.2231) (xy 210.416651 76.2231) (xy 210.41665 76.223101) + (xy 210.41665 77.140088) (xy 210.359643 77.107175) (xy 210.232476 77.0731) (xy 210.100824 77.0731) + (xy 209.973657 77.107175) (xy 209.91665 77.140088) (xy 209.91665 76.223101) (xy 209.916649 76.2231) + (xy 209.9104 76.2231) (xy 209.700528 76.25634) (xy 209.498434 76.322004) (xy 209.309097 76.418475) + (xy 209.137185 76.543377) (xy 208.986927 76.693635) (xy 208.862025 76.865547) (xy 208.765554 77.054884) + (xy 208.699891 77.256977) (xy 208.689418 77.323099) (xy 197.200382 77.323099) (xy 197.273198 77.214121) + (xy 197.335426 77.063889) (xy 197.36715 76.904405) (xy 197.36715 76.741795) (xy 197.335426 76.582311) + (xy 197.273198 76.432079) (xy 197.182858 76.296875) (xy 197.067875 76.181892) (xy 197.067871 76.181889) + (xy 197.064167 76.179414) (xy 197.026289 76.131363) (xy 197.023889 76.070225) (xy 197.057883 76.019352) + (xy 197.115287 75.998176) (xy 197.119171 75.9981) (xy 197.264474 75.9981) (xy 197.32402 75.991698) + (xy 197.324031 75.991696) (xy 197.458738 75.941453) (xy 197.45874 75.941452) (xy 197.573834 75.855292) + (xy 197.573842 75.855284) (xy 197.660002 75.74019) (xy 197.660003 75.740188) (xy 197.710246 75.605481) + (xy 197.710248 75.60547) (xy 197.71665 75.545924) (xy 197.71665 75.073101) (xy 197.716649 75.0731) + (xy 196.857336 75.0731) (xy 196.86173 75.068706) (xy 196.914391 74.977494) (xy 196.94165 74.875761) + (xy 196.94165 74.770439) (xy 196.914391 74.668706) (xy 196.86173 74.577494) (xy 196.857336 74.5731) + (xy 197.716649 74.5731) (xy 197.71665 74.573099) (xy 197.71665 74.100275) (xy 197.710248 74.040729) + (xy 197.710246 74.040718) (xy 197.660003 73.906011) (xy 197.660002 73.906009) (xy 197.573842 73.790915) + (xy 197.573834 73.790907) (xy 197.45874 73.704747) (xy 197.458738 73.704746) (xy 197.324031 73.654503) + (xy 197.32402 73.654501) (xy 197.264474 73.6481) (xy 196.791651 73.6481) (xy 196.79165 73.648101) + (xy 196.79165 74.507414) (xy 196.787256 74.50302) (xy 196.696044 74.450359) (xy 196.594311 74.4231) + (xy 196.488989 74.4231) (xy 196.387256 74.450359) (xy 196.296044 74.50302) (xy 196.29165 74.507414) + (xy 196.29165 73.648101) (xy 196.291649 73.6481) (xy 195.818826 73.6481) (xy 195.759279 73.654501) + (xy 195.759268 73.654503) (xy 195.624561 73.704746) (xy 195.624559 73.704747) (xy 195.509465 73.790907) + (xy 195.509457 73.790915) (xy 195.423297 73.906009) (xy 195.423296 73.906011) (xy 195.373053 74.040718) + (xy 195.373051 74.040729) (xy 195.36665 74.100275) (xy 195.36665 74.573099) (xy 195.366651 74.5731) + (xy 196.225964 74.5731) (xy 196.22157 74.577494) (xy 196.168909 74.668706) (xy 196.14165 74.770439) + (xy 196.14165 74.875761) (xy 196.168909 74.977494) (xy 196.22157 75.068706) (xy 196.225964 75.0731) + (xy 195.366651 75.0731) (xy 195.36665 75.073101) (xy 195.36665 75.545924) (xy 195.366649 75.545924) + (xy 175.010585 75.545924) (xy 175.01715 75.51292) (xy 175.01715 74.13328) (xy 175.013899 74.116935) + (xy 175.013899 74.116933) (xy 175.008417 74.089379) (xy 175.008415 74.089375) (xy 175.007973 74.088714) + (xy 174.975154 74.039596) (xy 174.93597 74.013414) (xy 174.925374 74.006334) (xy 174.92537 74.006332) + (xy 174.881477 73.9976) (xy 174.88147 73.9976) (xy 173.50183 73.9976) (xy 173.501822 73.9976) (xy 173.457929 74.006332) + (xy 173.457925 74.006334) (xy 173.408148 74.039594) (xy 173.408144 74.039598) (xy 173.374884 74.089375) + (xy 173.374882 74.089379) (xy 173.36615 74.133272) (xy 156.45215 74.133272) (xy 156.45215 74.004559) + (xy 156.413701 73.811265) (xy 156.338282 73.629186) (xy 156.228789 73.465318) (xy 156.089432 73.325961) + (xy 155.979938 73.252799) (xy 155.925563 73.216467) (xy 155.743485 73.141049) (xy 155.550193 73.1026) + (xy 155.550191 73.1026) (xy 155.353109 73.1026) (xy 155.353106 73.1026) (xy 155.159815 73.141049) + (xy 155.159813 73.141049) (xy 154.977736 73.216467) (xy 154.813868 73.325961) (xy 154.813864 73.325964) + (xy 154.674514 73.465314) (xy 154.674511 73.465318) (xy 154.565017 73.629186) (xy 154.489599 73.811263) + (xy 154.454486 73.987784) (xy 154.424589 74.041167) (xy 154.369023 74.066783) (xy 154.309014 74.054846) + (xy 154.267481 74.009916) (xy 154.259607 73.983956) (xy 154.228409 73.786978) (xy 154.162745 73.584884) (xy 154.066273 73.395546) (xy 154.066269 73.39554) (xy 154.02692 73.341382) (xy 154.026919 73.341382) (xy 153.394612 73.973689) (xy 153.377575 73.910107) (xy 153.311749 73.796093) (xy 153.218657 73.703001) (xy 153.104643 73.637175) (xy 153.041057 73.620137) (xy 153.673366 72.987829) (xy 153.673366 72.987828) @@ -49285,476 +57408,567 @@ (xy 152.204092 72.948478) (xy 152.149932 72.987828) (xy 152.782241 73.620137) (xy 152.718657 73.637175) (xy 152.604643 73.703001) (xy 152.511551 73.796093) (xy 152.445725 73.910107) (xy 152.428687 73.973691) (xy 151.796378 73.341382) (xy 151.757028 73.395542) (xy 151.757026 73.395546) (xy 151.660554 73.584884) - (xy 151.630922 73.676084) (xy 151.594958 73.725584) (xy 151.536767 73.744491) (xy 151.478576 73.725584) - (xy 151.442612 73.676084) (xy 151.442612 73.676083) (xy 151.441474 73.672583) (xy 151.437861 73.661461) - (xy 151.355646 73.500106) (xy 151.249203 73.353599) (xy 151.121151 73.225547) (xy 150.974644 73.119104) - (xy 150.97464 73.119101) (xy 150.974638 73.1191) (xy 150.964177 73.11377) (xy 150.964176 73.11377) - (xy 150.813287 73.036888) (xy 150.641056 72.980928) (xy 150.462199 72.9526) (xy 150.462196 72.9526) - (xy 150.281104 72.9526) (xy 150.281101 72.9526) (xy 150.102243 72.980928) (xy 149.930012 73.036888) - (xy 149.768658 73.119102) (xy 149.695402 73.172325) (xy 149.622149 73.225547) (xy 149.494097 73.353599) - (xy 149.463625 73.39554) (xy 149.387652 73.500108) (xy 149.305438 73.661462) (xy 149.249478 73.833693) - (xy 149.22115 74.01255) (xy 148.98215 74.01255) (xy 148.961396 73.881516) (xy 148.953821 73.833691) - (xy 148.897861 73.661461) (xy 148.815646 73.500106) (xy 148.709203 73.353599) (xy 148.581151 73.225547) - (xy 148.434644 73.119104) (xy 148.434643 73.119103) (xy 148.434641 73.119102) (xy 148.273287 73.036888) - (xy 148.101056 72.980928) (xy 147.922199 72.9526) (xy 147.922196 72.9526) (xy 147.741104 72.9526) - (xy 147.741101 72.9526) (xy 147.562243 72.980928) (xy 147.390012 73.036888) (xy 147.228658 73.119102) - (xy 147.155402 73.172325) (xy 147.082149 73.225547) (xy 146.954097 73.353599) (xy 146.923625 73.39554) - (xy 146.847652 73.500108) (xy 146.765438 73.661462) (xy 146.709478 73.833693) (xy 146.68115 74.01255) - (xy 146.44215 74.01255) (xy 146.421396 73.881516) (xy 146.413821 73.833691) (xy 146.357861 73.661461) - (xy 146.275646 73.500106) (xy 146.169203 73.353599) (xy 146.041151 73.225547) (xy 145.894644 73.119104) - (xy 145.894643 73.119103) (xy 145.894641 73.119102) (xy 145.733287 73.036888) (xy 145.561056 72.980928) - (xy 145.382199 72.9526) (xy 145.382196 72.9526) (xy 145.201104 72.9526) (xy 145.201101 72.9526) - (xy 145.022243 72.980928) (xy 144.850012 73.036888) (xy 144.688658 73.119102) (xy 144.615402 73.172325) - (xy 144.542149 73.225547) (xy 144.414097 73.353599) (xy 144.383625 73.39554) (xy 144.307652 73.500108) - (xy 144.225438 73.661462) (xy 144.169478 73.833693) (xy 144.14115 74.01255) (xy 143.90215 74.01255) - (xy 143.881396 73.881516) (xy 143.873821 73.833691) (xy 143.817861 73.661461) (xy 143.735646 73.500106) - (xy 143.629203 73.353599) (xy 143.501151 73.225547) (xy 143.354644 73.119104) (xy 143.354643 73.119103) - (xy 143.354641 73.119102) (xy 143.193287 73.036888) (xy 143.021056 72.980928) (xy 142.842199 72.9526) - (xy 142.842196 72.9526) (xy 142.661104 72.9526) (xy 142.661101 72.9526) (xy 142.482243 72.980928) - (xy 142.310012 73.036888) (xy 142.148658 73.119102) (xy 142.075402 73.172325) (xy 142.002149 73.225547) - (xy 141.874097 73.353599) (xy 141.843625 73.39554) (xy 141.767652 73.500108) (xy 141.685438 73.661462) - (xy 141.629478 73.833693) (xy 141.60115 74.01255) (xy 141.36215 74.01255) (xy 141.341396 73.881516) - (xy 141.333821 73.833691) (xy 141.277861 73.661461) (xy 141.195646 73.500106) (xy 141.089203 73.353599) - (xy 140.961151 73.225547) (xy 140.814644 73.119104) (xy 140.814643 73.119103) (xy 140.814641 73.119102) - (xy 140.653287 73.036888) (xy 140.481056 72.980928) (xy 140.302199 72.9526) (xy 140.302196 72.9526) - (xy 140.121104 72.9526) (xy 140.121101 72.9526) (xy 139.942243 72.980928) (xy 139.770012 73.036888) - (xy 139.608658 73.119102) (xy 139.535402 73.172325) (xy 139.462149 73.225547) (xy 139.334097 73.353599) - (xy 139.303625 73.39554) (xy 139.227652 73.500108) (xy 139.145438 73.661462) (xy 139.089478 73.833693) - (xy 139.06115 74.01255) (xy 138.82215 74.01255) (xy 138.801396 73.881516) (xy 138.793821 73.833691) - (xy 138.737861 73.661461) (xy 138.655646 73.500106) (xy 138.549203 73.353599) (xy 138.421151 73.225547) - (xy 138.274644 73.119104) (xy 138.274643 73.119103) (xy 138.274641 73.119102) (xy 138.113287 73.036888) - (xy 137.941056 72.980928) (xy 137.762199 72.9526) (xy 137.762196 72.9526) (xy 137.581104 72.9526) - (xy 137.581101 72.9526) (xy 137.402243 72.980928) (xy 137.230012 73.036888) (xy 137.068658 73.119102) - (xy 136.995402 73.172325) (xy 136.922149 73.225547) (xy 136.794097 73.353599) (xy 136.763625 73.39554) - (xy 136.687652 73.500108) (xy 136.605438 73.661462) (xy 136.549478 73.833693) (xy 136.52115 74.01255) - (xy 136.28215 74.01255) (xy 136.261396 73.881516) (xy 136.253821 73.833691) (xy 136.197861 73.661461) - (xy 136.115646 73.500106) (xy 136.009203 73.353599) (xy 135.881151 73.225547) (xy 135.734644 73.119104) - (xy 135.734643 73.119103) (xy 135.734641 73.119102) (xy 135.573287 73.036888) (xy 135.401056 72.980928) - (xy 135.222199 72.9526) (xy 135.222196 72.9526) (xy 135.041104 72.9526) (xy 135.041101 72.9526) - (xy 134.862243 72.980928) (xy 134.690012 73.036888) (xy 134.528658 73.119102) (xy 134.455402 73.172325) - (xy 134.382149 73.225547) (xy 134.254097 73.353599) (xy 134.223625 73.39554) (xy 134.147652 73.500108) - (xy 134.065438 73.661462) (xy 134.009478 73.833693) (xy 133.98115 74.01255) (xy 133.74215 74.01255) - (xy 133.721396 73.881516) (xy 133.713821 73.833691) (xy 133.657861 73.661461) (xy 133.575646 73.500106) - (xy 133.469203 73.353599) (xy 133.341151 73.225547) (xy 133.194644 73.119104) (xy 133.194643 73.119103) - (xy 133.194641 73.119102) (xy 133.033287 73.036888) (xy 132.861056 72.980928) (xy 132.682199 72.9526) - (xy 132.682196 72.9526) (xy 132.501104 72.9526) (xy 132.501101 72.9526) (xy 132.322243 72.980928) - (xy 132.150012 73.036888) (xy 131.988658 73.119102) (xy 131.915402 73.172325) (xy 131.842149 73.225547) - (xy 131.714097 73.353599) (xy 131.683625 73.39554) (xy 131.607652 73.500108) (xy 131.525438 73.661462) - (xy 131.469478 73.833693) (xy 131.44115 74.01255) (xy 131.20215 74.01255) (xy 131.181396 73.881516) - (xy 131.173821 73.833691) (xy 131.117861 73.661461) (xy 131.035646 73.500106) (xy 130.929203 73.353599) - (xy 130.801151 73.225547) (xy 130.654644 73.119104) (xy 130.654643 73.119103) (xy 130.654641 73.119102) - (xy 130.493287 73.036888) (xy 130.321056 72.980928) (xy 130.142199 72.9526) (xy 130.142196 72.9526) - (xy 129.961104 72.9526) (xy 129.961101 72.9526) (xy 129.782243 72.980928) (xy 129.610012 73.036888) - (xy 129.448658 73.119102) (xy 129.375402 73.172325) (xy 129.302149 73.225547) (xy 129.174097 73.353599) - (xy 129.143625 73.39554) (xy 129.067652 73.500108) (xy 128.985438 73.661462) (xy 128.929478 73.833693) - (xy 128.90115 74.01255) (xy 128.66215 74.01255) (xy 128.641396 73.881516) (xy 128.633821 73.833691) - (xy 128.577861 73.661461) (xy 128.495646 73.500106) (xy 128.389203 73.353599) (xy 128.261151 73.225547) - (xy 128.114644 73.119104) (xy 128.114643 73.119103) (xy 128.114641 73.119102) (xy 127.953287 73.036888) - (xy 127.781056 72.980928) (xy 127.602199 72.9526) (xy 127.602196 72.9526) (xy 127.421104 72.9526) - (xy 127.421101 72.9526) (xy 127.242243 72.980928) (xy 127.070012 73.036888) (xy 126.908658 73.119102) - (xy 126.835402 73.172325) (xy 126.762149 73.225547) (xy 126.634097 73.353599) (xy 126.603625 73.39554) - (xy 126.527652 73.500108) (xy 126.445438 73.661462) (xy 126.389478 73.833693) (xy 126.36115 74.01255) - (xy 126.12215 74.01255) (xy 126.101396 73.881516) (xy 126.093821 73.833691) (xy 126.037861 73.661461) - (xy 125.955646 73.500106) (xy 125.849203 73.353599) (xy 125.721151 73.225547) (xy 125.574644 73.119104) - (xy 125.574643 73.119103) (xy 125.574641 73.119102) (xy 125.413287 73.036888) (xy 125.241056 72.980928) - (xy 125.062199 72.9526) (xy 125.062196 72.9526) (xy 124.881104 72.9526) (xy 124.881101 72.9526) - (xy 124.702243 72.980928) (xy 124.530012 73.036888) (xy 124.368658 73.119102) (xy 124.295402 73.172325) - (xy 124.222149 73.225547) (xy 124.094097 73.353599) (xy 124.063625 73.39554) (xy 123.987652 73.500108) - (xy 123.905438 73.661462) (xy 123.849478 73.833693) (xy 123.82115 74.01255) (xy 123.58215 74.01255) - (xy 123.561396 73.881516) (xy 123.553821 73.833691) (xy 123.497861 73.661461) (xy 123.415646 73.500106) - (xy 123.309203 73.353599) (xy 123.181151 73.225547) (xy 123.034644 73.119104) (xy 123.034643 73.119103) - (xy 123.034641 73.119102) (xy 122.873287 73.036888) (xy 122.701056 72.980928) (xy 122.522199 72.9526) - (xy 122.522196 72.9526) (xy 122.341104 72.9526) (xy 122.341101 72.9526) (xy 122.162243 72.980928) - (xy 121.990012 73.036888) (xy 121.828658 73.119102) (xy 121.755402 73.172325) (xy 121.682149 73.225547) - (xy 121.554097 73.353599) (xy 121.523625 73.39554) (xy 121.447652 73.500108) (xy 121.365438 73.661462) - (xy 121.309478 73.833693) (xy 121.28115 74.01255) (xy 121.04215 74.01255) (xy 121.021396 73.881516) - (xy 121.013821 73.833691) (xy 120.957861 73.661461) (xy 120.875646 73.500106) (xy 120.769203 73.353599) - (xy 120.641151 73.225547) (xy 120.494644 73.119104) (xy 120.494643 73.119103) (xy 120.494641 73.119102) - (xy 120.333287 73.036888) (xy 120.161056 72.980928) (xy 119.982199 72.9526) (xy 119.982196 72.9526) - (xy 119.801104 72.9526) (xy 119.801101 72.9526) (xy 119.622243 72.980928) (xy 119.450012 73.036888) - (xy 119.288658 73.119102) (xy 119.215402 73.172325) (xy 119.142149 73.225547) (xy 119.014097 73.353599) - (xy 118.983625 73.39554) (xy 118.907652 73.500108) (xy 118.825438 73.661462) (xy 118.769478 73.833693) - (xy 118.74115 74.01255) (xy 118.50215 74.01255) (xy 118.481396 73.881516) (xy 118.473821 73.833691) - (xy 118.417861 73.661461) (xy 118.335646 73.500106) (xy 118.229203 73.353599) (xy 118.101151 73.225547) - (xy 117.954644 73.119104) (xy 117.954643 73.119103) (xy 117.954641 73.119102) (xy 117.793287 73.036888) - (xy 117.621056 72.980928) (xy 117.442199 72.9526) (xy 117.442196 72.9526) (xy 117.261104 72.9526) - (xy 117.261101 72.9526) (xy 117.082243 72.980928) (xy 116.910012 73.036888) (xy 116.748658 73.119102) - (xy 116.675402 73.172325) (xy 116.602149 73.225547) (xy 116.474097 73.353599) (xy 116.443625 73.39554) - (xy 116.367652 73.500108) (xy 116.285438 73.661462) (xy 116.229478 73.833693) (xy 116.20115 74.01255) - (xy 115.96215 74.01255) (xy 115.941396 73.881516) (xy 115.933821 73.833691) (xy 115.877861 73.661461) - (xy 115.795646 73.500106) (xy 115.689203 73.353599) (xy 115.561151 73.225547) (xy 115.414644 73.119104) - (xy 115.414643 73.119103) (xy 115.414641 73.119102) (xy 115.253287 73.036888) (xy 115.081056 72.980928) - (xy 114.902199 72.9526) (xy 114.902196 72.9526) (xy 114.721104 72.9526) (xy 114.721101 72.9526) - (xy 114.542243 72.980928) (xy 114.370012 73.036888) (xy 114.208658 73.119102) (xy 114.135402 73.172325) - (xy 114.062149 73.225547) (xy 113.934097 73.353599) (xy 113.903625 73.39554) (xy 113.827652 73.500108) - (xy 113.745438 73.661462) (xy 113.689478 73.833693) (xy 113.66115 74.01255) (xy 113.42215 74.01255) - (xy 113.401396 73.881516) (xy 113.393821 73.833691) (xy 113.337861 73.661461) (xy 113.255646 73.500106) - (xy 113.149203 73.353599) (xy 113.021151 73.225547) (xy 112.874644 73.119104) (xy 112.874643 73.119103) - (xy 112.874641 73.119102) (xy 112.713287 73.036888) (xy 112.541056 72.980928) (xy 112.362199 72.9526) - (xy 112.362196 72.9526) (xy 112.181104 72.9526) (xy 112.181101 72.9526) (xy 112.002243 72.980928) - (xy 111.830012 73.036888) (xy 111.668658 73.119102) (xy 111.595402 73.172325) (xy 111.522149 73.225547) - (xy 111.394097 73.353599) (xy 111.363625 73.39554) (xy 111.287652 73.500108) (xy 111.205438 73.661462) - (xy 111.149478 73.833693) (xy 111.12115 74.01255) (xy 110.88215 74.01255) (xy 110.861396 73.881516) - (xy 110.853821 73.833691) (xy 110.797861 73.661461) (xy 110.715646 73.500106) (xy 110.609203 73.353599) - (xy 110.481151 73.225547) (xy 110.334644 73.119104) (xy 110.334643 73.119103) (xy 110.334641 73.119102) - (xy 110.173287 73.036888) (xy 110.001056 72.980928) (xy 109.822199 72.9526) (xy 109.822196 72.9526) - (xy 109.641104 72.9526) (xy 109.641101 72.9526) (xy 109.462243 72.980928) (xy 109.290012 73.036888) - (xy 109.128658 73.119102) (xy 109.055402 73.172325) (xy 108.982149 73.225547) (xy 108.854097 73.353599) - (xy 108.823625 73.39554) (xy 108.747652 73.500108) (xy 108.665438 73.661462) (xy 108.609478 73.833693) - (xy 108.58115 74.01255) (xy 108.342149 74.01255) (xy 108.342149 73.208236) (xy 108.339235 73.183109) - (xy 108.293856 73.080335) (xy 108.214415 73.000894) (xy 108.111641 72.955515) (xy 108.11164 72.955514) - (xy 108.111638 72.955514) (xy 108.086518 72.9526) (xy 106.296789 72.9526) (xy 106.296786 72.952601) - (xy 106.271659 72.955514) (xy 106.168885 73.000894) (xy 106.089444 73.080335) (xy 106.044064 73.183111) - (xy 106.04115 73.20823) (xy 80.794659 73.20823) (xy 80.794656 73.205476) (xy 80.793525 72.087543) - (xy 95.88055 72.087543) (xy 95.88055 72.245657) (xy 95.921473 72.398384) (xy 96.00053 72.535316) - (xy 96.112334 72.64712) (xy 96.249266 72.726177) (xy 96.401993 72.7671) (xy 96.401995 72.7671) (xy 96.560105 72.7671) - (xy 96.560107 72.7671) (xy 96.712834 72.726177) (xy 96.849766 72.64712) (xy 96.96157 72.535316) - (xy 97.040627 72.398384) (xy 97.08155 72.245657) (xy 97.08155 72.087543) (xy 97.040627 71.934816) - (xy 96.96157 71.797884) (xy 96.849766 71.68608) (xy 96.712834 71.607023) (xy 96.560107 71.5661) - (xy 96.401993 71.5661) (xy 96.249266 71.607023) (xy 96.112334 71.68608) (xy 96.00053 71.797884) - (xy 95.921473 71.934816) (xy 95.88055 72.087543) (xy 80.793525 72.087543) (xy 80.793519 72.081154) - (xy 80.792512 71.085543) (xy 103.74485 71.085543) (xy 103.74485 71.243657) (xy 103.785773 71.396384) - (xy 103.86483 71.533316) (xy 103.976634 71.64512) (xy 104.113566 71.724177) (xy 104.266293 71.7651) - (xy 104.266295 71.7651) (xy 104.424405 71.7651) (xy 104.424407 71.7651) (xy 104.577134 71.724177) - (xy 104.714066 71.64512) (xy 104.82587 71.533316) (xy 104.904927 71.396384) (xy 104.94585 71.243657) - (xy 104.94585 71.085543) (xy 104.904927 70.932816) (xy 104.82587 70.795884) (xy 104.714066 70.68408) - (xy 104.577134 70.605023) (xy 104.424407 70.5641) (xy 104.266293 70.5641) (xy 104.113566 70.605023) - (xy 103.976634 70.68408) (xy 103.86483 70.795884) (xy 103.785773 70.932816) (xy 103.74485 71.085543) - (xy 80.792512 71.085543) (xy 80.791752 70.333543) (xy 93.63775 70.333543) (xy 93.63775 70.491657) - (xy 93.678673 70.644384) (xy 93.75773 70.781316) (xy 93.869534 70.89312) (xy 94.006466 70.972177) - (xy 94.159193 71.0131) (xy 94.159195 71.0131) (xy 94.317305 71.0131) (xy 94.317307 71.0131) (xy 94.470034 70.972177) - (xy 94.606966 70.89312) (xy 94.71877 70.781316) (xy 94.797827 70.644384) (xy 94.83875 70.491657) - (xy 94.83875 70.333543) (xy 94.797827 70.180816) (xy 94.797352 70.179993) (xy 208.86615 70.179993) - (xy 208.86615 71.466206) (xy 208.876773 71.554665) (xy 208.932287 71.695439) (xy 208.932288 71.695441) - (xy 208.932289 71.695442) (xy 209.023728 71.816022) (xy 209.144308 71.907461) (xy 209.144309 71.907461) - (xy 209.14431 71.907462) (xy 209.213675 71.934816) (xy 209.285086 71.962977) (xy 209.373548 71.9736) - (xy 209.37355 71.9736) (xy 210.95975 71.9736) (xy 210.959752 71.9736) (xy 211.048214 71.962977) - (xy 211.188992 71.907461) (xy 211.309572 71.816022) (xy 211.401011 71.695442) (xy 211.456527 71.554664) - (xy 211.46715 71.466202) (xy 211.46715 70.179998) (xy 211.456527 70.091536) (xy 211.401011 69.950758) - (xy 211.309572 69.830178) (xy 211.188992 69.738739) (xy 211.188991 69.738738) (xy 211.188989 69.738737) - (xy 211.048215 69.683223) (xy 210.959756 69.6726) (xy 210.959752 69.6726) (xy 209.373548 69.6726) - (xy 209.373543 69.6726) (xy 209.285084 69.683223) (xy 209.14431 69.738737) (xy 209.144306 69.73874) - (xy 209.023731 69.830175) (xy 209.023725 69.830181) (xy 208.93229 69.950756) (xy 208.932287 69.95076) - (xy 208.876773 70.091534) (xy 208.86615 70.179993) (xy 94.797352 70.179993) (xy 94.71877 70.043884) - (xy 94.606966 69.93208) (xy 94.470034 69.853023) (xy 94.317307 69.8121) (xy 94.159193 69.8121) (xy 94.006466 69.853023) - (xy 93.869534 69.93208) (xy 93.75773 70.043884) (xy 93.678673 70.180816) (xy 93.63775 70.333543) - (xy 80.791752 70.333543) (xy 80.791746 70.327154) (xy 80.789011 67.621843) (xy 91.59805 67.621843) - (xy 91.59805 67.779957) (xy 91.638973 67.932684) (xy 91.71803 68.069616) (xy 91.829834 68.18142) - (xy 91.966766 68.260477) (xy 92.119493 68.3014) (xy 92.119495 68.3014) (xy 92.261819 68.3014) (xy 92.32001 68.320307) - (xy 92.355974 68.369807) (xy 92.357445 68.426021) (xy 92.32885 68.532743) (xy 92.32885 68.690857) - (xy 92.369773 68.843584) (xy 92.44883 68.980516) (xy 92.560634 69.09232) (xy 92.697566 69.171377) - (xy 92.850293 69.2123) (xy 92.850295 69.2123) (xy 93.008405 69.2123) (xy 93.008407 69.2123) (xy 93.161134 69.171377) - (xy 93.298066 69.09232) (xy 93.40987 68.980516) (xy 93.418861 68.964943) (xy 147.06075 68.964943) - (xy 147.06075 69.123057) (xy 147.101673 69.275784) (xy 147.18073 69.412716) (xy 147.292534 69.52452) - (xy 147.429466 69.603577) (xy 147.582193 69.6445) (xy 147.582195 69.6445) (xy 147.740305 69.6445) - (xy 147.740307 69.6445) (xy 147.893034 69.603577) (xy 148.029966 69.52452) (xy 148.14177 69.412716) - (xy 148.220827 69.275784) (xy 148.26175 69.123057) (xy 148.26175 68.964943) (xy 148.220827 68.812216) - (xy 148.14177 68.675284) (xy 148.029966 68.56348) (xy 147.893034 68.484423) (xy 147.740307 68.4435) - (xy 147.582193 68.4435) (xy 147.429466 68.484423) (xy 147.292534 68.56348) (xy 147.18073 68.675284) - (xy 147.101673 68.812216) (xy 147.06075 68.964943) (xy 93.418861 68.964943) (xy 93.488927 68.843584) - (xy 93.52985 68.690857) (xy 93.52985 68.532743) (xy 93.488927 68.380016) (xy 93.40987 68.243084) - (xy 93.399336 68.23255) (xy 208.86615 68.23255) (xy 208.86615 68.413649) (xy 208.894478 68.592506) - (xy 208.950438 68.764737) (xy 209.02392 68.908954) (xy 209.032654 68.926094) (xy 209.139097 69.072601) - (xy 209.267149 69.200653) (xy 209.413656 69.307096) (xy 209.575011 69.389311) (xy 209.747241 69.445271) - (xy 209.818786 69.456602) (xy 209.926101 69.4736) (xy 209.926104 69.4736) (xy 210.407199 69.4736) - (xy 210.496627 69.459435) (xy 210.586059 69.445271) (xy 210.758289 69.389311) (xy 210.919644 69.307096) - (xy 211.066151 69.200653) (xy 211.194203 69.072601) (xy 211.300646 68.926094) (xy 211.382861 68.764739) - (xy 211.438821 68.592509) (xy 211.46715 68.413646) (xy 211.46715 68.232554) (xy 211.46715 68.23255) - (xy 211.438821 68.053693) (xy 211.438821 68.053691) (xy 211.382861 67.881461) (xy 211.300646 67.720106) - (xy 211.194203 67.573599) (xy 211.066151 67.445547) (xy 210.919644 67.339104) (xy 210.919643 67.339103) - (xy 210.919641 67.339102) (xy 210.758287 67.256888) (xy 210.586056 67.200928) (xy 210.407199 67.1726) - (xy 210.407196 67.1726) (xy 209.926104 67.1726) (xy 209.926101 67.1726) (xy 209.747243 67.200928) - (xy 209.575012 67.256888) (xy 209.413658 67.339102) (xy 209.340402 67.392325) (xy 209.267149 67.445547) - (xy 209.139097 67.573599) (xy 209.108688 67.615454) (xy 209.032652 67.720108) (xy 208.950438 67.881462) - (xy 208.894478 68.053693) (xy 208.86615 68.23255) (xy 93.399336 68.23255) (xy 93.298066 68.13128) - (xy 93.161134 68.052223) (xy 93.008407 68.0113) (xy 92.866081 68.0113) (xy 92.80789 67.992393) (xy 92.771926 67.942893) - (xy 92.770454 67.886678) (xy 92.79905 67.779957) (xy 92.79905 67.621843) (xy 92.758127 67.469116) - (xy 92.722347 67.407143) (xy 119.88935 67.407143) (xy 119.88935 67.565257) (xy 119.930273 67.717984) - (xy 120.00933 67.854916) (xy 120.121134 67.96672) (xy 120.258066 68.045777) (xy 120.410793 68.0867) - (xy 120.410795 68.0867) (xy 120.568905 68.0867) (xy 120.568907 68.0867) (xy 120.721634 68.045777) - (xy 120.858566 67.96672) (xy 120.97037 67.854916) (xy 121.049427 67.717984) (xy 121.09035 67.565257) - (xy 121.09035 67.407143) (xy 121.049427 67.254416) (xy 120.97037 67.117484) (xy 120.858566 67.00568) - (xy 120.721634 66.926623) (xy 120.568907 66.8857) (xy 120.410793 66.8857) (xy 120.258066 66.926623) - (xy 120.121134 67.00568) (xy 120.00933 67.117484) (xy 119.930273 67.254416) (xy 119.88935 67.407143) - (xy 92.722347 67.407143) (xy 92.67907 67.332184) (xy 92.567266 67.22038) (xy 92.430334 67.141323) - (xy 92.277607 67.1004) (xy 92.119493 67.1004) (xy 91.966766 67.141323) (xy 91.829834 67.22038) (xy 91.71803 67.332184) - (xy 91.638973 67.469116) (xy 91.59805 67.621843) (xy 80.789011 67.621843) (xy 80.789005 67.615454) - (xy 80.788719 67.332184) (xy 80.785745 64.390343) (xy 152.49295 64.390343) (xy 152.49295 64.548457) - (xy 152.533873 64.701184) (xy 152.61293 64.838116) (xy 152.724734 64.94992) (xy 152.861666 65.028977) - (xy 153.014393 65.0699) (xy 153.014395 65.0699) (xy 153.172505 65.0699) (xy 153.172507 65.0699) - (xy 153.325234 65.028977) (xy 153.462166 64.94992) (xy 153.517643 64.894443) (xy 163.57535 64.894443) - (xy 163.57535 65.052557) (xy 163.616273 65.205284) (xy 163.69533 65.342216) (xy 163.807134 65.45402) - (xy 163.944066 65.533077) (xy 164.096793 65.574) (xy 164.096795 65.574) (xy 164.254905 65.574) (xy 164.254907 65.574) - (xy 164.407634 65.533077) (xy 164.432981 65.518443) (xy 169.23045 65.518443) (xy 169.23045 65.676557) - (xy 169.271373 65.829284) (xy 169.35043 65.966216) (xy 169.462234 66.07802) (xy 169.599166 66.157077) - (xy 169.751893 66.198) (xy 169.751895 66.198) (xy 169.910005 66.198) (xy 169.910007 66.198) (xy 170.062734 66.157077) - (xy 170.199666 66.07802) (xy 170.31147 65.966216) (xy 170.33628 65.923244) (xy 187.98365 65.923244) - (xy 187.98365 66.127955) (xy 188.015671 66.330129) (xy 188.07893 66.524819) (xy 188.171862 66.707209) - (xy 188.171864 66.707213) (xy 188.292179 66.872813) (xy 188.292181 66.872815) (xy 188.292184 66.872819) - (xy 188.436931 67.017566) (xy 188.436934 67.017568) (xy 188.436936 67.01757) (xy 188.602536 67.137885) - (xy 188.60254 67.137887) (xy 188.784931 67.23082) (xy 188.979616 67.294077) (xy 188.979617 67.294077) - (xy 188.97962 67.294078) (xy 189.181795 67.3261) (xy 189.181798 67.3261) (xy 189.386505 67.3261) - (xy 189.588679 67.294078) (xy 189.58868 67.294077) (xy 189.588684 67.294077) (xy 189.783369 67.23082) - (xy 189.96576 67.137887) (xy 190.131369 67.017566) (xy 190.276116 66.872819) (xy 190.396437 66.70721) - (xy 190.48937 66.524819) (xy 190.552627 66.330134) (xy 190.552628 66.330129) (xy 190.58465 66.127955) - (xy 190.58465 65.923244) (xy 193.06365 65.923244) (xy 193.06365 66.127955) (xy 193.095671 66.330129) - (xy 193.15893 66.524819) (xy 193.251862 66.707209) (xy 193.251864 66.707213) (xy 193.372179 66.872813) - (xy 193.372181 66.872815) (xy 193.372184 66.872819) (xy 193.516931 67.017566) (xy 193.516934 67.017568) - (xy 193.516936 67.01757) (xy 193.682536 67.137885) (xy 193.68254 67.137887) (xy 193.864931 67.23082) - (xy 194.059616 67.294077) (xy 194.059617 67.294077) (xy 194.05962 67.294078) (xy 194.261795 67.3261) - (xy 194.261798 67.3261) (xy 194.466505 67.3261) (xy 194.668679 67.294078) (xy 194.66868 67.294077) - (xy 194.668684 67.294077) (xy 194.863369 67.23082) (xy 195.04576 67.137887) (xy 195.211369 67.017566) - (xy 195.356116 66.872819) (xy 195.476437 66.70721) (xy 195.56937 66.524819) (xy 195.632627 66.330134) - (xy 195.632628 66.330129) (xy 195.66465 66.127955) (xy 195.66465 65.923244) (xy 195.632628 65.72107) - (xy 195.584842 65.574) (xy 195.56937 65.526381) (xy 195.476437 65.34399) (xy 195.476435 65.343986) - (xy 195.35612 65.178386) (xy 195.356118 65.178384) (xy 195.356116 65.178381) (xy 195.211369 65.033634) - (xy 195.211365 65.033631) (xy 195.211363 65.033629) (xy 195.045763 64.913314) (xy 195.045759 64.913312) - (xy 194.863369 64.82038) (xy 194.668679 64.757121) (xy 194.466505 64.7251) (xy 194.466502 64.7251) - (xy 194.261798 64.7251) (xy 194.261795 64.7251) (xy 194.05962 64.757121) (xy 193.86493 64.82038) - (xy 193.68254 64.913312) (xy 193.682536 64.913314) (xy 193.516936 65.033629) (xy 193.372179 65.178386) - (xy 193.251864 65.343986) (xy 193.251862 65.34399) (xy 193.15893 65.52638) (xy 193.095671 65.72107) - (xy 193.06365 65.923244) (xy 190.58465 65.923244) (xy 190.552628 65.72107) (xy 190.504842 65.574) - (xy 190.48937 65.526381) (xy 190.396437 65.34399) (xy 190.396435 65.343986) (xy 190.27612 65.178386) - (xy 190.276118 65.178384) (xy 190.276116 65.178381) (xy 190.131369 65.033634) (xy 190.131365 65.033631) - (xy 190.131363 65.033629) (xy 189.965763 64.913314) (xy 189.965759 64.913312) (xy 189.783369 64.82038) - (xy 189.588679 64.757121) (xy 189.386505 64.7251) (xy 189.386502 64.7251) (xy 189.181798 64.7251) - (xy 189.181795 64.7251) (xy 188.97962 64.757121) (xy 188.78493 64.82038) (xy 188.60254 64.913312) - (xy 188.602536 64.913314) (xy 188.436936 65.033629) (xy 188.292179 65.178386) (xy 188.171864 65.343986) - (xy 188.171862 65.34399) (xy 188.07893 65.52638) (xy 188.015671 65.72107) (xy 187.98365 65.923244) - (xy 170.33628 65.923244) (xy 170.390527 65.829284) (xy 170.43145 65.676557) (xy 170.43145 65.518443) - (xy 170.390527 65.365716) (xy 170.31147 65.228784) (xy 170.199666 65.11698) (xy 170.062734 65.037923) - (xy 169.910007 64.997) (xy 169.751893 64.997) (xy 169.599166 65.037923) (xy 169.462234 65.11698) - (xy 169.35043 65.228784) (xy 169.271373 65.365716) (xy 169.23045 65.518443) (xy 164.432981 65.518443) - (xy 164.544566 65.45402) (xy 164.65637 65.342216) (xy 164.735427 65.205284) (xy 164.77635 65.052557) - (xy 164.77635 64.894443) (xy 164.735427 64.741716) (xy 164.65637 64.604784) (xy 164.544566 64.49298) - (xy 164.407634 64.413923) (xy 164.254907 64.373) (xy 164.096793 64.373) (xy 163.944066 64.413923) - (xy 163.807134 64.49298) (xy 163.69533 64.604784) (xy 163.616273 64.741716) (xy 163.57535 64.894443) - (xy 153.517643 64.894443) (xy 153.57397 64.838116) (xy 153.653027 64.701184) (xy 153.69395 64.548457) - (xy 153.69395 64.390343) (xy 153.653027 64.237616) (xy 153.57397 64.100684) (xy 153.462166 63.98888) - (xy 153.325234 63.909823) (xy 153.172507 63.8689) (xy 153.014393 63.8689) (xy 152.861666 63.909823) - (xy 152.724734 63.98888) (xy 152.61293 64.100684) (xy 152.533873 64.237616) (xy 152.49295 64.390343) - (xy 80.785745 64.390343) (xy 80.784569 63.227243) (xy 154.28115 63.227243) (xy 154.28115 63.385357) - (xy 154.322073 63.538084) (xy 154.40113 63.675016) (xy 154.512934 63.78682) (xy 154.649866 63.865877) - (xy 154.802593 63.9068) (xy 154.802595 63.9068) (xy 154.960705 63.9068) (xy 154.960707 63.9068) - (xy 155.113434 63.865877) (xy 155.250366 63.78682) (xy 155.36217 63.675016) (xy 155.385505 63.634598) - (xy 155.430972 63.593659) (xy 155.491822 63.587262) (xy 155.54481 63.617854) (xy 155.556977 63.634599) - (xy 155.558872 63.637882) (xy 155.558873 63.637884) (xy 155.63793 63.774816) (xy 155.749734 63.88662) - (xy 155.886666 63.965677) (xy 156.039393 64.0066) (xy 156.039395 64.0066) (xy 156.197505 64.0066) - (xy 156.197507 64.0066) (xy 156.350234 63.965677) (xy 156.487166 63.88662) (xy 156.59897 63.774816) - (xy 156.616737 63.744043) (xy 166.08365 63.744043) (xy 166.08365 63.902157) (xy 166.124573 64.054884) - (xy 166.20363 64.191816) (xy 166.315434 64.30362) (xy 166.452366 64.382677) (xy 166.605093 64.4236) - (xy 166.605095 64.4236) (xy 166.763205 64.4236) (xy 166.763207 64.4236) (xy 166.915934 64.382677) - (xy 167.052866 64.30362) (xy 167.16467 64.191816) (xy 167.243727 64.054884) (xy 167.28465 63.902157) - (xy 167.28465 63.744043) (xy 167.243727 63.591316) (xy 167.16467 63.454384) (xy 167.052866 63.34258) - (xy 166.915934 63.263523) (xy 166.763207 63.2226) (xy 166.605093 63.2226) (xy 166.452366 63.263523) - (xy 166.315434 63.34258) (xy 166.20363 63.454384) (xy 166.124573 63.591316) (xy 166.08365 63.744043) - (xy 156.616737 63.744043) (xy 156.678027 63.637884) (xy 156.71895 63.485157) (xy 156.71895 63.327043) - (xy 156.678027 63.174316) (xy 156.59897 63.037384) (xy 156.487166 62.92558) (xy 156.386296 62.867343) - (xy 187.38935 62.867343) (xy 187.38935 63.025457) (xy 187.430273 63.178184) (xy 187.50933 63.315116) - (xy 187.621134 63.42692) (xy 187.758066 63.505977) (xy 187.910793 63.5469) (xy 187.910795 63.5469) - (xy 188.068905 63.5469) (xy 188.068907 63.5469) (xy 188.221634 63.505977) (xy 188.358566 63.42692) - (xy 188.47037 63.315116) (xy 188.549427 63.178184) (xy 188.59035 63.025457) (xy 188.59035 62.867343) - (xy 188.549427 62.714616) (xy 188.47037 62.577684) (xy 188.358566 62.46588) (xy 188.221634 62.386823) - (xy 188.068907 62.3459) (xy 187.910793 62.3459) (xy 187.758066 62.386823) (xy 187.621134 62.46588) - (xy 187.50933 62.577684) (xy 187.430273 62.714616) (xy 187.38935 62.867343) (xy 156.386296 62.867343) - (xy 156.350234 62.846523) (xy 156.197507 62.8056) (xy 156.039393 62.8056) (xy 155.886666 62.846523) - (xy 155.749734 62.92558) (xy 155.637929 63.037385) (xy 155.614595 63.077801) (xy 155.569125 63.118741) - (xy 155.508275 63.125136) (xy 155.455287 63.094543) (xy 155.443122 63.0778) (xy 155.441227 63.074519) - (xy 155.441227 63.074516) (xy 155.36217 62.937584) (xy 155.250366 62.82578) (xy 155.113434 62.746723) - (xy 154.960707 62.7058) (xy 154.802593 62.7058) (xy 154.649866 62.746723) (xy 154.512934 62.82578) - (xy 154.40113 62.937584) (xy 154.322073 63.074516) (xy 154.28115 63.227243) (xy 80.784569 63.227243) - (xy 80.783288 61.959343) (xy 90.47005 61.959343) (xy 90.47005 62.117457) (xy 90.510973 62.270184) - (xy 90.59003 62.407116) (xy 90.701834 62.51892) (xy 90.838766 62.597977) (xy 90.991493 62.6389) - (xy 90.991495 62.6389) (xy 91.149605 62.6389) (xy 91.149607 62.6389) (xy 91.302334 62.597977) (xy 91.439266 62.51892) - (xy 91.55107 62.407116) (xy 91.630127 62.270184) (xy 91.67105 62.117457) (xy 91.67105 61.959343) - (xy 91.630127 61.806616) (xy 91.55107 61.669684) (xy 91.439266 61.55788) (xy 91.302334 61.478823) - (xy 91.149607 61.4379) (xy 90.991493 61.4379) (xy 90.838766 61.478823) (xy 90.701834 61.55788) (xy 90.59003 61.669684) - (xy 90.510973 61.806616) (xy 90.47005 61.959343) (xy 80.783288 61.959343) (xy 80.782401 61.082243) - (xy 154.96215 61.082243) (xy 154.96215 61.240357) (xy 155.003073 61.393084) (xy 155.08213 61.530016) - (xy 155.193934 61.64182) (xy 155.330866 61.720877) (xy 155.483593 61.7618) (xy 155.483595 61.7618) - (xy 155.641705 61.7618) (xy 155.641707 61.7618) (xy 155.794434 61.720877) (xy 155.931366 61.64182) - (xy 156.04317 61.530016) (xy 156.122227 61.393084) (xy 156.16315 61.240357) (xy 156.16315 61.082243) - (xy 156.122227 60.929516) (xy 156.086101 60.866943) (xy 159.68005 60.866943) (xy 159.68005 61.025057) - (xy 159.720973 61.177784) (xy 159.80003 61.314716) (xy 159.911834 61.42652) (xy 160.048766 61.505577) - (xy 160.201493 61.5465) (xy 160.201495 61.5465) (xy 160.359605 61.5465) (xy 160.359607 61.5465) - (xy 160.512334 61.505577) (xy 160.535603 61.492143) (xy 161.04175 61.492143) (xy 161.04175 61.650257) - (xy 161.082673 61.802984) (xy 161.16173 61.939916) (xy 161.273534 62.05172) (xy 161.410466 62.130777) - (xy 161.563193 62.1717) (xy 161.563195 62.1717) (xy 161.721305 62.1717) (xy 161.721307 62.1717) - (xy 161.874034 62.130777) (xy 162.010966 62.05172) (xy 162.12277 61.939916) (xy 162.201827 61.802984) - (xy 162.24275 61.650257) (xy 162.24275 61.492143) (xy 162.201827 61.339416) (xy 162.12277 61.202484) - (xy 162.010966 61.09068) (xy 161.874034 61.011623) (xy 161.721307 60.9707) (xy 161.563193 60.9707) - (xy 161.410466 61.011623) (xy 161.273534 61.09068) (xy 161.16173 61.202484) (xy 161.082673 61.339416) - (xy 161.04175 61.492143) (xy 160.535603 61.492143) (xy 160.649266 61.42652) (xy 160.76107 61.314716) - (xy 160.840127 61.177784) (xy 160.88105 61.025057) (xy 160.88105 60.866943) (xy 160.840127 60.714216) - (xy 160.76107 60.577284) (xy 160.649266 60.46548) (xy 160.649263 60.465478) (xy 160.649259 60.465474) - (xy 160.64412 60.461531) (xy 160.6456 60.459601) (xy 160.611714 60.421969) (xy 160.605317 60.361119) - (xy 160.635908 60.30813) (xy 160.691803 60.283243) (xy 160.702154 60.2827) (xy 160.772605 60.2827) - (xy 160.772607 60.2827) (xy 160.909413 60.246043) (xy 163.90085 60.246043) (xy 163.90085 60.404157) - (xy 163.941773 60.556884) (xy 164.02083 60.693816) (xy 164.132634 60.80562) (xy 164.269566 60.884677) - (xy 164.422293 60.9256) (xy 164.422295 60.9256) (xy 164.580405 60.9256) (xy 164.580407 60.9256) - (xy 164.733134 60.884677) (xy 164.737177 60.882343) (xy 181.09295 60.882343) (xy 181.09295 61.040457) - (xy 181.133873 61.193184) (xy 181.21293 61.330116) (xy 181.324734 61.44192) (xy 181.461666 61.520977) - (xy 181.614393 61.5619) (xy 181.614395 61.5619) (xy 181.772505 61.5619) (xy 181.772507 61.5619) - (xy 181.925234 61.520977) (xy 182.062166 61.44192) (xy 182.17397 61.330116) (xy 182.253027 61.193184) - (xy 182.256562 61.179993) (xy 208.91615 61.179993) (xy 208.91615 62.466206) (xy 208.926773 62.554665) - (xy 208.982287 62.695439) (xy 208.982288 62.695441) (xy 208.982289 62.695442) (xy 209.073728 62.816022) - (xy 209.194308 62.907461) (xy 209.194309 62.907461) (xy 209.19431 62.907462) (xy 209.240254 62.92558) - (xy 209.335086 62.962977) (xy 209.423548 62.9736) (xy 209.42355 62.9736) (xy 210.95975 62.9736) - (xy 210.959752 62.9736) (xy 211.048214 62.962977) (xy 211.188992 62.907461) (xy 211.309572 62.816022) - (xy 211.401011 62.695442) (xy 211.456527 62.554664) (xy 211.46715 62.466202) (xy 211.46715 61.179998) - (xy 211.456527 61.091536) (xy 211.401011 60.950758) (xy 211.309572 60.830178) (xy 211.188992 60.738739) - (xy 211.188991 60.738738) (xy 211.188989 60.738737) (xy 211.048215 60.683223) (xy 210.959756 60.6726) - (xy 210.959752 60.6726) (xy 209.423548 60.6726) (xy 209.423543 60.6726) (xy 209.335084 60.683223) - (xy 209.19431 60.738737) (xy 209.194306 60.73874) (xy 209.073731 60.830175) (xy 209.073725 60.830181) - (xy 208.98229 60.950756) (xy 208.982287 60.95076) (xy 208.926773 61.091534) (xy 208.91615 61.179993) - (xy 182.256562 61.179993) (xy 182.29395 61.040457) (xy 182.29395 60.882343) (xy 182.253027 60.729616) - (xy 182.17397 60.592684) (xy 182.062166 60.48088) (xy 181.925234 60.401823) (xy 181.772507 60.3609) - (xy 181.614393 60.3609) (xy 181.461666 60.401823) (xy 181.324734 60.48088) (xy 181.21293 60.592684) - (xy 181.133873 60.729616) (xy 181.09295 60.882343) (xy 164.737177 60.882343) (xy 164.870066 60.80562) - (xy 164.98187 60.693816) (xy 165.060927 60.556884) (xy 165.10185 60.404157) (xy 165.10185 60.246043) - (xy 165.072831 60.137743) (xy 173.76025 60.137743) (xy 173.76025 60.295857) (xy 173.801173 60.448584) - (xy 173.88023 60.585516) (xy 173.992034 60.69732) (xy 174.128966 60.776377) (xy 174.281693 60.8173) - (xy 174.281695 60.8173) (xy 174.439805 60.8173) (xy 174.439807 60.8173) (xy 174.592534 60.776377) - (xy 174.729466 60.69732) (xy 174.84127 60.585516) (xy 174.920327 60.448584) (xy 174.96125 60.295857) - (xy 174.96125 60.137743) (xy 174.920327 59.985016) (xy 174.84127 59.848084) (xy 174.729466 59.73628) - (xy 174.592534 59.657223) (xy 174.439807 59.6163) (xy 174.281693 59.6163) (xy 174.128966 59.657223) - (xy 173.992034 59.73628) (xy 173.88023 59.848084) (xy 173.801173 59.985016) (xy 173.76025 60.137743) - (xy 165.072831 60.137743) (xy 165.060927 60.093316) (xy 164.98187 59.956384) (xy 164.870066 59.84458) - (xy 164.733134 59.765523) (xy 164.580407 59.7246) (xy 164.422293 59.7246) (xy 164.269566 59.765523) - (xy 164.132634 59.84458) (xy 164.02083 59.956384) (xy 163.941773 60.093316) (xy 163.90085 60.246043) - (xy 160.909413 60.246043) (xy 160.925334 60.241777) (xy 161.062266 60.16272) (xy 161.17407 60.050916) - (xy 161.253127 59.913984) (xy 161.29405 59.761257) (xy 161.29405 59.603143) (xy 161.253127 59.450416) - (xy 161.17407 59.313484) (xy 161.062266 59.20168) (xy 160.925334 59.122623) (xy 160.772607 59.0817) - (xy 160.614493 59.0817) (xy 160.461766 59.122623) (xy 160.324834 59.20168) (xy 160.21303 59.313484) - (xy 160.133973 59.450416) (xy 160.09305 59.603143) (xy 160.09305 59.761257) (xy 160.133973 59.913984) - (xy 160.21303 60.050916) (xy 160.324834 60.16272) (xy 160.324836 60.162721) (xy 160.32484 60.162725) - (xy 160.32998 60.166669) (xy 160.328499 60.168598) (xy 160.362386 60.206231) (xy 160.368783 60.267081) - (xy 160.338192 60.32007) (xy 160.282297 60.344957) (xy 160.271946 60.3455) (xy 160.201493 60.3455) - (xy 160.048766 60.386423) (xy 159.911834 60.46548) (xy 159.80003 60.577284) (xy 159.720973 60.714216) - (xy 159.68005 60.866943) (xy 156.086101 60.866943) (xy 156.04317 60.792584) (xy 155.931366 60.68078) - (xy 155.794434 60.601723) (xy 155.641707 60.5608) (xy 155.483593 60.5608) (xy 155.330866 60.601723) - (xy 155.193934 60.68078) (xy 155.08213 60.792584) (xy 155.003073 60.929516) (xy 154.96215 61.082243) - (xy 80.782401 61.082243) (xy 80.776686 55.42823) (xy 106.04115 55.42823) (xy 106.04115 57.21796) - (xy 106.041151 57.217963) (xy 106.044064 57.24309) (xy 106.068354 57.2981) (xy 106.089444 57.345865) - (xy 106.168885 57.425306) (xy 106.271659 57.470685) (xy 106.296785 57.4736) (xy 108.086514 57.473599) - (xy 108.111641 57.470685) (xy 108.214415 57.425306) (xy 108.293856 57.345865) (xy 108.339235 57.243091) - (xy 108.34215 57.217965) (xy 108.342149 56.23255) (xy 108.58115 56.23255) (xy 108.58115 56.413649) - (xy 108.609478 56.592506) (xy 108.665438 56.764737) (xy 108.742114 56.915223) (xy 108.747654 56.926094) - (xy 108.854097 57.072601) (xy 108.982149 57.200653) (xy 109.128656 57.307096) (xy 109.290011 57.389311) - (xy 109.462241 57.445271) (xy 109.533786 57.456602) (xy 109.641101 57.4736) (xy 109.641104 57.4736) - (xy 109.822199 57.4736) (xy 109.911627 57.459435) (xy 110.001059 57.445271) (xy 110.173289 57.389311) - (xy 110.334644 57.307096) (xy 110.481151 57.200653) (xy 110.609203 57.072601) (xy 110.715646 56.926094) - (xy 110.797861 56.764739) (xy 110.853821 56.592509) (xy 110.88215 56.413646) (xy 110.88215 56.232554) - (xy 110.88215 56.23255) (xy 111.12115 56.23255) (xy 111.12115 56.413649) (xy 111.149478 56.592506) - (xy 111.205438 56.764737) (xy 111.282114 56.915223) (xy 111.287654 56.926094) (xy 111.394097 57.072601) - (xy 111.522149 57.200653) (xy 111.668656 57.307096) (xy 111.830011 57.389311) (xy 112.002241 57.445271) - (xy 112.073786 57.456602) (xy 112.181101 57.4736) (xy 112.181104 57.4736) (xy 112.362199 57.4736) - (xy 112.451627 57.459435) (xy 112.541059 57.445271) (xy 112.713289 57.389311) (xy 112.874644 57.307096) - (xy 113.021151 57.200653) (xy 113.149203 57.072601) (xy 113.255646 56.926094) (xy 113.337861 56.764739) - (xy 113.393821 56.592509) (xy 113.42215 56.413646) (xy 113.42215 56.232554) (xy 113.42215 56.23255) - (xy 113.66115 56.23255) (xy 113.66115 56.413649) (xy 113.689478 56.592506) (xy 113.745438 56.764737) - (xy 113.822114 56.915223) (xy 113.827654 56.926094) (xy 113.934097 57.072601) (xy 114.062149 57.200653) - (xy 114.208656 57.307096) (xy 114.370011 57.389311) (xy 114.542241 57.445271) (xy 114.613786 57.456602) - (xy 114.721101 57.4736) (xy 114.721104 57.4736) (xy 114.902199 57.4736) (xy 114.991627 57.459435) - (xy 115.081059 57.445271) (xy 115.253289 57.389311) (xy 115.414644 57.307096) (xy 115.561151 57.200653) - (xy 115.689203 57.072601) (xy 115.795646 56.926094) (xy 115.877861 56.764739) (xy 115.933821 56.592509) - (xy 115.96215 56.413646) (xy 115.96215 56.232554) (xy 115.96215 56.23255) (xy 116.20115 56.23255) - (xy 116.20115 56.413649) (xy 116.229478 56.592506) (xy 116.285438 56.764737) (xy 116.362114 56.915223) - (xy 116.367654 56.926094) (xy 116.474097 57.072601) (xy 116.602149 57.200653) (xy 116.748656 57.307096) - (xy 116.910011 57.389311) (xy 117.082241 57.445271) (xy 117.153786 57.456602) (xy 117.261101 57.4736) - (xy 117.261104 57.4736) (xy 117.442199 57.4736) (xy 117.531627 57.459435) (xy 117.621059 57.445271) - (xy 117.793289 57.389311) (xy 117.954644 57.307096) (xy 118.101151 57.200653) (xy 118.229203 57.072601) - (xy 118.335646 56.926094) (xy 118.417861 56.764739) (xy 118.473821 56.592509) (xy 118.50215 56.413646) - (xy 118.50215 56.232554) (xy 118.50215 56.23255) (xy 118.74115 56.23255) (xy 118.74115 56.413649) - (xy 118.769478 56.592506) (xy 118.825438 56.764737) (xy 118.902114 56.915223) (xy 118.907654 56.926094) - (xy 119.014097 57.072601) (xy 119.142149 57.200653) (xy 119.288656 57.307096) (xy 119.450011 57.389311) - (xy 119.622241 57.445271) (xy 119.693786 57.456602) (xy 119.801101 57.4736) (xy 119.801104 57.4736) - (xy 119.982199 57.4736) (xy 120.071627 57.459435) (xy 120.161059 57.445271) (xy 120.333289 57.389311) - (xy 120.494644 57.307096) (xy 120.641151 57.200653) (xy 120.769203 57.072601) (xy 120.875646 56.926094) - (xy 120.957861 56.764739) (xy 121.013821 56.592509) (xy 121.04215 56.413646) (xy 121.04215 56.232554) - (xy 121.04215 56.23255) (xy 121.28115 56.23255) (xy 121.28115 56.413649) (xy 121.309478 56.592506) - (xy 121.365438 56.764737) (xy 121.442114 56.915223) (xy 121.447654 56.926094) (xy 121.554097 57.072601) - (xy 121.682149 57.200653) (xy 121.828656 57.307096) (xy 121.990011 57.389311) (xy 122.162241 57.445271) - (xy 122.233786 57.456602) (xy 122.341101 57.4736) (xy 122.341104 57.4736) (xy 122.522199 57.4736) - (xy 122.611627 57.459435) (xy 122.701059 57.445271) (xy 122.853493 57.395743) (xy 123.59245 57.395743) - (xy 123.59245 57.553857) (xy 123.633373 57.706584) (xy 123.71243 57.843516) (xy 123.824234 57.95532) - (xy 123.961166 58.034377) (xy 124.113893 58.0753) (xy 124.113895 58.0753) (xy 124.272005 58.0753) - (xy 124.272007 58.0753) (xy 124.424734 58.034377) (xy 124.561666 57.95532) (xy 124.67347 57.843516) - (xy 124.752527 57.706584) (xy 124.79345 57.553857) (xy 124.79345 57.553855) (xy 124.795129 57.547589) - (xy 124.798061 57.548374) (xy 124.819072 57.504403) (xy 124.872863 57.475245) (xy 124.890837 57.4736) - (xy 125.062199 57.4736) (xy 125.151627 57.459435) (xy 125.241059 57.445271) (xy 125.413289 57.389311) - (xy 125.574644 57.307096) (xy 125.721151 57.200653) (xy 125.849203 57.072601) (xy 125.955646 56.926094) - (xy 126.037861 56.764739) (xy 126.093821 56.592509) (xy 126.12215 56.413646) (xy 126.12215 56.232554) - (xy 126.12215 56.23255) (xy 126.36115 56.23255) (xy 126.36115 56.413649) (xy 126.389478 56.592506) - (xy 126.445438 56.764737) (xy 126.522114 56.915223) (xy 126.527654 56.926094) (xy 126.634097 57.072601) - (xy 126.762149 57.200653) (xy 126.908656 57.307096) (xy 127.070011 57.389311) (xy 127.242241 57.445271) - (xy 127.313786 57.456602) (xy 127.421101 57.4736) (xy 127.421104 57.4736) (xy 127.602199 57.4736) - (xy 127.691627 57.459435) (xy 127.781059 57.445271) (xy 127.953289 57.389311) (xy 128.114644 57.307096) - (xy 128.261151 57.200653) (xy 128.389203 57.072601) (xy 128.495646 56.926094) (xy 128.577861 56.764739) - (xy 128.633821 56.592509) (xy 128.66215 56.413646) (xy 128.66215 56.232554) (xy 128.66215 56.23255) - (xy 128.90115 56.23255) (xy 128.90115 56.413649) (xy 128.929478 56.592506) (xy 128.985438 56.764737) - (xy 129.062114 56.915223) (xy 129.067654 56.926094) (xy 129.174097 57.072601) (xy 129.302149 57.200653) - (xy 129.448656 57.307096) (xy 129.610011 57.389311) (xy 129.782241 57.445271) (xy 129.853786 57.456602) - (xy 129.961101 57.4736) (xy 129.961104 57.4736) (xy 130.142199 57.4736) (xy 130.231627 57.459435) - (xy 130.321059 57.445271) (xy 130.493289 57.389311) (xy 130.654644 57.307096) (xy 130.801151 57.200653) - (xy 130.929203 57.072601) (xy 131.035646 56.926094) (xy 131.117861 56.764739) (xy 131.173821 56.592509) - (xy 131.20215 56.413646) (xy 131.20215 56.232554) (xy 131.20215 56.23255) (xy 131.44115 56.23255) - (xy 131.44115 56.413649) (xy 131.469478 56.592506) (xy 131.525438 56.764737) (xy 131.602114 56.915223) - (xy 131.607654 56.926094) (xy 131.714097 57.072601) (xy 131.842149 57.200653) (xy 131.988656 57.307096) - (xy 132.150011 57.389311) (xy 132.322241 57.445271) (xy 132.393786 57.456602) (xy 132.501101 57.4736) - (xy 132.501104 57.4736) (xy 132.682199 57.4736) (xy 132.771627 57.459435) (xy 132.861059 57.445271) - (xy 133.033289 57.389311) (xy 133.194644 57.307096) (xy 133.341151 57.200653) (xy 133.469203 57.072601) - (xy 133.575646 56.926094) (xy 133.657861 56.764739) (xy 133.713821 56.592509) (xy 133.74215 56.413646) - (xy 133.74215 56.232554) (xy 133.74215 56.23255) (xy 133.98115 56.23255) (xy 133.98115 56.413649) - (xy 134.009478 56.592506) (xy 134.065438 56.764737) (xy 134.142114 56.915223) (xy 134.147654 56.926094) - (xy 134.254097 57.072601) (xy 134.382149 57.200653) (xy 134.528656 57.307096) (xy 134.690011 57.389311) - (xy 134.862241 57.445271) (xy 134.933786 57.456602) (xy 135.041101 57.4736) (xy 135.041104 57.4736) - (xy 135.222199 57.4736) (xy 135.311627 57.459435) (xy 135.401059 57.445271) (xy 135.573289 57.389311) - (xy 135.734644 57.307096) (xy 135.881151 57.200653) (xy 136.009203 57.072601) (xy 136.115646 56.926094) - (xy 136.197861 56.764739) (xy 136.253821 56.592509) (xy 136.28215 56.413646) (xy 136.28215 56.232554) - (xy 136.28215 56.23255) (xy 136.52115 56.23255) (xy 136.52115 56.413649) (xy 136.549478 56.592506) - (xy 136.605438 56.764737) (xy 136.682114 56.915223) (xy 136.687654 56.926094) (xy 136.794097 57.072601) - (xy 136.922149 57.200653) (xy 137.068656 57.307096) (xy 137.230011 57.389311) (xy 137.402241 57.445271) - (xy 137.473786 57.456602) (xy 137.581101 57.4736) (xy 137.581104 57.4736) (xy 137.762199 57.4736) - (xy 137.851627 57.459435) (xy 137.941059 57.445271) (xy 138.113289 57.389311) (xy 138.274644 57.307096) - (xy 138.421151 57.200653) (xy 138.549203 57.072601) (xy 138.655646 56.926094) (xy 138.737861 56.764739) - (xy 138.793821 56.592509) (xy 138.82215 56.413646) (xy 138.82215 56.232554) (xy 138.82215 56.23255) - (xy 139.06115 56.23255) (xy 139.06115 56.413649) (xy 139.089478 56.592506) (xy 139.145438 56.764737) - (xy 139.222114 56.915223) (xy 139.227654 56.926094) (xy 139.334097 57.072601) (xy 139.462149 57.200653) - (xy 139.608656 57.307096) (xy 139.770011 57.389311) (xy 139.942241 57.445271) (xy 140.013786 57.456602) - (xy 140.121101 57.4736) (xy 140.121104 57.4736) (xy 140.302199 57.4736) (xy 140.391627 57.459435) - (xy 140.481059 57.445271) (xy 140.653289 57.389311) (xy 140.814644 57.307096) (xy 140.961151 57.200653) - (xy 141.089203 57.072601) (xy 141.195646 56.926094) (xy 141.277861 56.764739) (xy 141.333821 56.592509) - (xy 141.36215 56.413646) (xy 141.36215 56.232554) (xy 141.36215 56.23255) (xy 141.60115 56.23255) - (xy 141.60115 56.413649) (xy 141.629478 56.592506) (xy 141.685438 56.764737) (xy 141.762114 56.915223) - (xy 141.767654 56.926094) (xy 141.874097 57.072601) (xy 142.002149 57.200653) (xy 142.148656 57.307096) - (xy 142.310011 57.389311) (xy 142.482241 57.445271) (xy 142.553786 57.456602) (xy 142.661101 57.4736) - (xy 142.661104 57.4736) (xy 142.842199 57.4736) (xy 142.931627 57.459435) (xy 143.021059 57.445271) - (xy 143.193289 57.389311) (xy 143.354644 57.307096) (xy 143.501151 57.200653) (xy 143.629203 57.072601) - (xy 143.735646 56.926094) (xy 143.817861 56.764739) (xy 143.873821 56.592509) (xy 143.90215 56.413646) - (xy 143.90215 56.232554) (xy 143.90215 56.23255) (xy 144.14115 56.23255) (xy 144.14115 56.413649) - (xy 144.169478 56.592506) (xy 144.225438 56.764737) (xy 144.302114 56.915223) (xy 144.307654 56.926094) - (xy 144.414097 57.072601) (xy 144.542149 57.200653) (xy 144.688656 57.307096) (xy 144.850011 57.389311) - (xy 145.022241 57.445271) (xy 145.093786 57.456602) (xy 145.201101 57.4736) (xy 145.201104 57.4736) - (xy 145.382199 57.4736) (xy 145.471627 57.459435) (xy 145.561059 57.445271) (xy 145.733289 57.389311) - (xy 145.894644 57.307096) (xy 146.041151 57.200653) (xy 146.169203 57.072601) (xy 146.275646 56.926094) - (xy 146.357861 56.764739) (xy 146.413821 56.592509) (xy 146.44215 56.413646) (xy 146.44215 56.232554) - (xy 146.44215 56.23255) (xy 146.68115 56.23255) (xy 146.68115 56.413649) (xy 146.709478 56.592506) - (xy 146.765438 56.764737) (xy 146.842114 56.915223) (xy 146.847654 56.926094) (xy 146.954097 57.072601) - (xy 147.082149 57.200653) (xy 147.228656 57.307096) (xy 147.390011 57.389311) (xy 147.562241 57.445271) - (xy 147.633786 57.456602) (xy 147.741101 57.4736) (xy 147.741104 57.4736) (xy 147.922199 57.4736) - (xy 148.011627 57.459435) (xy 148.101059 57.445271) (xy 148.273289 57.389311) (xy 148.434644 57.307096) - (xy 148.581151 57.200653) (xy 148.709203 57.072601) (xy 148.815646 56.926094) (xy 148.897861 56.764739) - (xy 148.953821 56.592509) (xy 148.98215 56.413646) (xy 148.98215 56.232554) (xy 148.98215 56.23255) - (xy 149.22115 56.23255) (xy 149.22115 56.413649) (xy 149.249478 56.592506) (xy 149.305438 56.764737) - (xy 149.382114 56.915223) (xy 149.387654 56.926094) (xy 149.494097 57.072601) (xy 149.622149 57.200653) - (xy 149.768656 57.307096) (xy 149.930011 57.389311) (xy 150.102241 57.445271) (xy 150.173786 57.456602) - (xy 150.281101 57.4736) (xy 150.281104 57.4736) (xy 150.462199 57.4736) (xy 150.551627 57.459435) - (xy 150.641059 57.445271) (xy 150.813289 57.389311) (xy 150.813292 57.389309) (xy 150.813296 57.389308) - (xy 150.917258 57.336335) (xy 150.964177 57.312429) (xy 150.96418 57.312428) (xy 150.967816 57.310574) - (xy 150.974644 57.307096) (xy 151.121151 57.200653) (xy 151.249203 57.072601) (xy 151.355646 56.926094) - (xy 151.437861 56.764739) (xy 151.442612 56.750118) (xy 151.478574 56.700617) (xy 151.536765 56.681708) - (xy 151.594956 56.700614) (xy 151.630921 56.750113) (xy 151.630922 56.750115) (xy 151.660554 56.841315) + (xy 151.59489 73.786978) (xy 151.563692 73.983956) (xy 151.535914 74.038473) (xy 151.481398 74.06625) + (xy 151.420966 74.056679) (xy 151.377701 74.013414) (xy 151.368813 73.987783) (xy 151.368052 73.983956) + (xy 151.333701 73.811265) (xy 151.258282 73.629186) (xy 151.148789 73.465318) (xy 151.009432 73.325961) + (xy 150.899938 73.252799) (xy 150.845563 73.216467) (xy 150.663485 73.141049) (xy 150.571028 73.122658) + (xy 150.470193 73.1026) (xy 150.470191 73.1026) (xy 150.273109 73.1026) (xy 150.273106 73.1026) + (xy 150.079815 73.141049) (xy 150.079813 73.141049) (xy 149.897736 73.216467) (xy 149.733868 73.325961) + (xy 149.733864 73.325964) (xy 149.594514 73.465314) (xy 149.594511 73.465318) (xy 149.485017 73.629186) + (xy 149.409599 73.811263) (xy 149.409599 73.811265) (xy 149.37115 74.004556) (xy 148.832149 74.004556) + (xy 148.793701 73.811265) (xy 148.718282 73.629186) (xy 148.608789 73.465318) (xy 148.469432 73.325961) + (xy 148.359938 73.252799) (xy 148.305563 73.216467) (xy 148.123485 73.141049) (xy 147.930193 73.1026) + (xy 147.930191 73.1026) (xy 147.733109 73.1026) (xy 147.733106 73.1026) (xy 147.539815 73.141049) + (xy 147.539813 73.141049) (xy 147.357736 73.216467) (xy 147.193868 73.325961) (xy 147.193864 73.325964) + (xy 147.054514 73.465314) (xy 147.054511 73.465318) (xy 146.945017 73.629186) (xy 146.869599 73.811263) + (xy 146.869599 73.811265) (xy 146.83115 74.004556) (xy 146.292149 74.004556) (xy 146.253701 73.811265) + (xy 146.178282 73.629186) (xy 146.068789 73.465318) (xy 145.929432 73.325961) (xy 145.819938 73.252799) + (xy 145.765563 73.216467) (xy 145.583485 73.141049) (xy 145.390193 73.1026) (xy 145.390191 73.1026) + (xy 145.193109 73.1026) (xy 145.193106 73.1026) (xy 144.999815 73.141049) (xy 144.999813 73.141049) + (xy 144.817736 73.216467) (xy 144.653868 73.325961) (xy 144.653864 73.325964) (xy 144.514514 73.465314) + (xy 144.514511 73.465318) (xy 144.405017 73.629186) (xy 144.329599 73.811263) (xy 144.329599 73.811265) + (xy 144.29115 74.004556) (xy 143.752149 74.004556) (xy 143.713701 73.811265) (xy 143.638282 73.629186) + (xy 143.528789 73.465318) (xy 143.389432 73.325961) (xy 143.279938 73.252799) (xy 143.225563 73.216467) + (xy 143.043485 73.141049) (xy 142.850193 73.1026) (xy 142.850191 73.1026) (xy 142.653109 73.1026) + (xy 142.653106 73.1026) (xy 142.459815 73.141049) (xy 142.459813 73.141049) (xy 142.277736 73.216467) + (xy 142.113868 73.325961) (xy 142.113864 73.325964) (xy 141.974514 73.465314) (xy 141.974511 73.465318) + (xy 141.865017 73.629186) (xy 141.789599 73.811263) (xy 141.789599 73.811265) (xy 141.75115 74.004556) + (xy 141.212149 74.004556) (xy 141.173701 73.811265) (xy 141.098282 73.629186) (xy 140.988789 73.465318) + (xy 140.849432 73.325961) (xy 140.739938 73.252799) (xy 140.685563 73.216467) (xy 140.503485 73.141049) + (xy 140.310193 73.1026) (xy 140.310191 73.1026) (xy 140.113109 73.1026) (xy 140.113106 73.1026) + (xy 139.919815 73.141049) (xy 139.919813 73.141049) (xy 139.737736 73.216467) (xy 139.573868 73.325961) + (xy 139.573864 73.325964) (xy 139.434514 73.465314) (xy 139.434511 73.465318) (xy 139.325017 73.629186) + (xy 139.249599 73.811263) (xy 139.249599 73.811265) (xy 139.21115 74.004556) (xy 138.672149 74.004556) + (xy 138.633701 73.811265) (xy 138.558282 73.629186) (xy 138.448789 73.465318) (xy 138.309432 73.325961) + (xy 138.199938 73.252799) (xy 138.145563 73.216467) (xy 137.963485 73.141049) (xy 137.770193 73.1026) + (xy 137.770191 73.1026) (xy 137.573109 73.1026) (xy 137.573106 73.1026) (xy 137.379815 73.141049) + (xy 137.379813 73.141049) (xy 137.197736 73.216467) (xy 137.033868 73.325961) (xy 137.033864 73.325964) + (xy 136.894514 73.465314) (xy 136.894511 73.465318) (xy 136.785017 73.629186) (xy 136.709599 73.811263) + (xy 136.709599 73.811265) (xy 136.67115 74.004556) (xy 136.132149 74.004556) (xy 136.093701 73.811265) + (xy 136.018282 73.629186) (xy 135.908789 73.465318) (xy 135.769432 73.325961) (xy 135.659938 73.252799) + (xy 135.605563 73.216467) (xy 135.423485 73.141049) (xy 135.230193 73.1026) (xy 135.230191 73.1026) + (xy 135.033109 73.1026) (xy 135.033106 73.1026) (xy 134.839815 73.141049) (xy 134.839813 73.141049) + (xy 134.657736 73.216467) (xy 134.493868 73.325961) (xy 134.493864 73.325964) (xy 134.354514 73.465314) + (xy 134.354511 73.465318) (xy 134.245017 73.629186) (xy 134.169599 73.811263) (xy 134.169599 73.811265) + (xy 134.13115 74.004556) (xy 133.592149 74.004556) (xy 133.553701 73.811265) (xy 133.478282 73.629186) + (xy 133.368789 73.465318) (xy 133.229432 73.325961) (xy 133.119938 73.252799) (xy 133.065563 73.216467) + (xy 132.883485 73.141049) (xy 132.690193 73.1026) (xy 132.690191 73.1026) (xy 132.493109 73.1026) + (xy 132.493106 73.1026) (xy 132.299815 73.141049) (xy 132.299813 73.141049) (xy 132.117736 73.216467) + (xy 131.953868 73.325961) (xy 131.953864 73.325964) (xy 131.814514 73.465314) (xy 131.814511 73.465318) + (xy 131.705017 73.629186) (xy 131.629599 73.811263) (xy 131.629599 73.811265) (xy 131.59115 74.004556) + (xy 131.052149 74.004556) (xy 131.013701 73.811265) (xy 130.938282 73.629186) (xy 130.828789 73.465318) + (xy 130.689432 73.325961) (xy 130.579938 73.252799) (xy 130.525563 73.216467) (xy 130.343485 73.141049) + (xy 130.150193 73.1026) (xy 130.150191 73.1026) (xy 129.953109 73.1026) (xy 129.953106 73.1026) + (xy 129.759815 73.141049) (xy 129.759813 73.141049) (xy 129.577736 73.216467) (xy 129.413868 73.325961) + (xy 129.413864 73.325964) (xy 129.274514 73.465314) (xy 129.274511 73.465318) (xy 129.165017 73.629186) + (xy 129.089599 73.811263) (xy 129.089599 73.811265) (xy 129.05115 74.004556) (xy 128.512149 74.004556) + (xy 128.473701 73.811265) (xy 128.398282 73.629186) (xy 128.288789 73.465318) (xy 128.149432 73.325961) + (xy 128.039938 73.252799) (xy 127.985563 73.216467) (xy 127.803485 73.141049) (xy 127.610193 73.1026) + (xy 127.610191 73.1026) (xy 127.413109 73.1026) (xy 127.413106 73.1026) (xy 127.219815 73.141049) + (xy 127.219813 73.141049) (xy 127.037736 73.216467) (xy 126.873868 73.325961) (xy 126.873864 73.325964) + (xy 126.734514 73.465314) (xy 126.734511 73.465318) (xy 126.625017 73.629186) (xy 126.549599 73.811263) + (xy 126.549599 73.811265) (xy 126.51115 74.004556) (xy 125.972149 74.004556) (xy 125.933701 73.811265) + (xy 125.858282 73.629186) (xy 125.748789 73.465318) (xy 125.609432 73.325961) (xy 125.499938 73.252799) + (xy 125.445563 73.216467) (xy 125.263485 73.141049) (xy 125.070193 73.1026) (xy 125.070191 73.1026) + (xy 124.873109 73.1026) (xy 124.873106 73.1026) (xy 124.679815 73.141049) (xy 124.679813 73.141049) + (xy 124.497736 73.216467) (xy 124.333868 73.325961) (xy 124.333864 73.325964) (xy 124.194514 73.465314) + (xy 124.194511 73.465318) (xy 124.085017 73.629186) (xy 124.009599 73.811263) (xy 124.009599 73.811265) + (xy 123.97115 74.004556) (xy 123.432149 74.004556) (xy 123.393701 73.811265) (xy 123.318282 73.629186) + (xy 123.208789 73.465318) (xy 123.069432 73.325961) (xy 122.959938 73.252799) (xy 122.905563 73.216467) + (xy 122.723485 73.141049) (xy 122.530193 73.1026) (xy 122.530191 73.1026) (xy 122.333109 73.1026) + (xy 122.333106 73.1026) (xy 122.139815 73.141049) (xy 122.139813 73.141049) (xy 121.957736 73.216467) + (xy 121.793868 73.325961) (xy 121.793864 73.325964) (xy 121.654514 73.465314) (xy 121.654511 73.465318) + (xy 121.545017 73.629186) (xy 121.469599 73.811263) (xy 121.469599 73.811265) (xy 121.43115 74.004556) + (xy 120.892149 74.004556) (xy 120.853701 73.811265) (xy 120.778282 73.629186) (xy 120.668789 73.465318) + (xy 120.529432 73.325961) (xy 120.419938 73.252799) (xy 120.365563 73.216467) (xy 120.183485 73.141049) + (xy 119.990193 73.1026) (xy 119.990191 73.1026) (xy 119.793109 73.1026) (xy 119.793106 73.1026) + (xy 119.599815 73.141049) (xy 119.599813 73.141049) (xy 119.417736 73.216467) (xy 119.253868 73.325961) + (xy 119.253864 73.325964) (xy 119.114514 73.465314) (xy 119.114511 73.465318) (xy 119.005017 73.629186) + (xy 118.929599 73.811263) (xy 118.929599 73.811265) (xy 118.89115 74.004556) (xy 118.352149 74.004556) + (xy 118.313701 73.811265) (xy 118.238282 73.629186) (xy 118.128789 73.465318) (xy 117.989432 73.325961) + (xy 117.879938 73.252799) (xy 117.825563 73.216467) (xy 117.643485 73.141049) (xy 117.450193 73.1026) + (xy 117.450191 73.1026) (xy 117.253109 73.1026) (xy 117.253106 73.1026) (xy 117.059815 73.141049) + (xy 117.059813 73.141049) (xy 116.877736 73.216467) (xy 116.713868 73.325961) (xy 116.713864 73.325964) + (xy 116.574514 73.465314) (xy 116.574511 73.465318) (xy 116.465017 73.629186) (xy 116.389599 73.811263) + (xy 116.389599 73.811265) (xy 116.35115 74.004556) (xy 115.812149 74.004556) (xy 115.773701 73.811265) + (xy 115.698282 73.629186) (xy 115.588789 73.465318) (xy 115.449432 73.325961) (xy 115.339938 73.252799) + (xy 115.285563 73.216467) (xy 115.103485 73.141049) (xy 114.910193 73.1026) (xy 114.910191 73.1026) + (xy 114.713109 73.1026) (xy 114.713106 73.1026) (xy 114.519815 73.141049) (xy 114.519813 73.141049) + (xy 114.337736 73.216467) (xy 114.173868 73.325961) (xy 114.173864 73.325964) (xy 114.034514 73.465314) + (xy 114.034511 73.465318) (xy 113.925017 73.629186) (xy 113.849599 73.811263) (xy 113.849599 73.811265) + (xy 113.81115 74.004556) (xy 113.272149 74.004556) (xy 113.233701 73.811265) (xy 113.158282 73.629186) + (xy 113.048789 73.465318) (xy 112.909432 73.325961) (xy 112.799938 73.252799) (xy 112.745563 73.216467) + (xy 112.563485 73.141049) (xy 112.370193 73.1026) (xy 112.370191 73.1026) (xy 112.173109 73.1026) + (xy 112.173106 73.1026) (xy 111.979815 73.141049) (xy 111.979813 73.141049) (xy 111.797736 73.216467) + (xy 111.633868 73.325961) (xy 111.633864 73.325964) (xy 111.494514 73.465314) (xy 111.494511 73.465318) + (xy 111.385017 73.629186) (xy 111.309599 73.811263) (xy 111.309599 73.811265) (xy 111.27115 74.004556) + (xy 110.732149 74.004556) (xy 110.693701 73.811265) (xy 110.618282 73.629186) (xy 110.508789 73.465318) + (xy 110.369432 73.325961) (xy 110.259938 73.252799) (xy 110.205563 73.216467) (xy 110.023485 73.141049) + (xy 109.830193 73.1026) (xy 109.830191 73.1026) (xy 109.633109 73.1026) (xy 109.633106 73.1026) + (xy 109.439815 73.141049) (xy 109.439813 73.141049) (xy 109.257736 73.216467) (xy 109.093868 73.325961) + (xy 109.093864 73.325964) (xy 108.954514 73.465314) (xy 108.954511 73.465318) (xy 108.845017 73.629186) + (xy 108.769599 73.811263) (xy 108.769599 73.811265) (xy 108.73115 74.004556) (xy 108.19215 74.004556) + (xy 108.19215 73.23828) (xy 108.192149 73.238278) (xy 108.192149 73.238272) (xy 108.183417 73.194379) + (xy 108.183415 73.194375) (xy 108.150155 73.144598) (xy 108.150154 73.144596) (xy 108.14949 73.144152) + (xy 108.100374 73.111334) (xy 108.10037 73.111332) (xy 108.056477 73.1026) (xy 108.05647 73.1026) + (xy 106.32683 73.1026) (xy 106.326822 73.1026) (xy 106.282929 73.111332) (xy 106.282925 73.111334) + (xy 106.233148 73.144594) (xy 106.233144 73.144598) (xy 106.199884 73.194375) (xy 106.199882 73.194379) + (xy 106.19115 73.238272) (xy 80.794689 73.238272) (xy 80.794684 73.233516) (xy 80.793545 72.107291) + (xy 96.03055 72.107291) (xy 96.03055 72.225909) (xy 96.057624 72.326951) (xy 96.061252 72.34049) + (xy 96.120557 72.443208) (xy 96.120559 72.44321) (xy 96.120561 72.443213) (xy 96.204437 72.527089) + (xy 96.204439 72.52709) (xy 96.204441 72.527092) (xy 96.30716 72.586397) (xy 96.307161 72.586397) + (xy 96.307164 72.586399) (xy 96.421741 72.6171) (xy 96.421743 72.6171) (xy 96.540357 72.6171) (xy 96.540359 72.6171) + (xy 96.654936 72.586399) (xy 96.654938 72.586397) (xy 96.65494 72.586397) (xy 96.757658 72.527092) + (xy 96.757658 72.527091) (xy 96.757663 72.527089) (xy 96.841539 72.443213) (xy 96.900849 72.340486) + (xy 96.93155 72.225909) (xy 96.93155 72.107291) (xy 96.900849 71.992714) (xy 96.900847 71.992711) + (xy 96.900847 71.992709) (xy 96.841542 71.889991) (xy 96.84154 71.889989) (xy 96.841539 71.889987) + (xy 96.757663 71.806111) (xy 96.75766 71.806109) (xy 96.757658 71.806107) (xy 96.654939 71.746802) + (xy 96.65494 71.746802) (xy 96.641401 71.743174) (xy 96.540359 71.7161) (xy 96.421741 71.7161) (xy 96.351617 71.734889) + (xy 96.307159 71.746802) (xy 96.204441 71.806107) (xy 96.120557 71.889991) (xy 96.061252 71.992709) + (xy 96.061251 71.992714) (xy 96.03055 72.107291) (xy 80.793545 72.107291) (xy 80.793539 72.100902) + (xy 80.792652 71.223907) (xy 80.792532 71.105291) (xy 103.89485 71.105291) (xy 103.89485 71.223909) + (xy 103.921924 71.324951) (xy 103.925552 71.33849) (xy 103.984857 71.441208) (xy 103.984859 71.44121) + (xy 103.984861 71.441213) (xy 104.068737 71.525089) (xy 104.068739 71.52509) (xy 104.068741 71.525092) + (xy 104.17146 71.584397) (xy 104.171461 71.584397) (xy 104.171464 71.584399) (xy 104.286041 71.6151) + (xy 104.286043 71.6151) (xy 104.404657 71.6151) (xy 104.404659 71.6151) (xy 104.519236 71.584399) + (xy 104.519238 71.584397) (xy 104.51924 71.584397) (xy 104.621958 71.525092) (xy 104.621958 71.525091) + (xy 104.621963 71.525089) (xy 104.705839 71.441213) (xy 104.765149 71.338486) (xy 104.79585 71.223909) + (xy 104.79585 71.105291) (xy 104.765149 70.990714) (xy 104.765147 70.990711) (xy 104.765147 70.990709) + (xy 104.705842 70.887991) (xy 104.70584 70.887989) (xy 104.705839 70.887987) (xy 104.621963 70.804111) + (xy 104.62196 70.804109) (xy 104.621958 70.804107) (xy 104.519239 70.744802) (xy 104.51924 70.744802) + (xy 104.505701 70.741174) (xy 104.404659 70.7141) (xy 104.286041 70.7141) (xy 104.215917 70.732889) + (xy 104.171459 70.744802) (xy 104.068741 70.804107) (xy 103.984857 70.887991) (xy 103.925552 70.990709) + (xy 103.925551 70.990714) (xy 103.89485 71.105291) (xy 80.792532 71.105291) (xy 80.791772 70.353291) + (xy 93.78775 70.353291) (xy 93.78775 70.471909) (xy 93.814824 70.572951) (xy 93.818452 70.58649) + (xy 93.877757 70.689208) (xy 93.877759 70.68921) (xy 93.877761 70.689213) (xy 93.961637 70.773089) + (xy 93.961639 70.77309) (xy 93.961641 70.773092) (xy 94.06436 70.832397) (xy 94.064361 70.832397) + (xy 94.064364 70.832399) (xy 94.178941 70.8631) (xy 94.178943 70.8631) (xy 94.297557 70.8631) (xy 94.297559 70.8631) + (xy 94.412136 70.832399) (xy 94.412138 70.832397) (xy 94.41214 70.832397) (xy 94.514858 70.773092) + (xy 94.514858 70.773091) (xy 94.514863 70.773089) (xy 94.598739 70.689213) (xy 94.658049 70.586486) + (xy 94.68875 70.471909) (xy 94.68875 70.353291) (xy 94.658049 70.238714) (xy 94.658046 70.238709) + (xy 94.657168 70.237187) (xy 94.657167 70.237186) (xy 94.630835 70.191578) (xy 209.01615 70.191578) + (xy 209.01615 71.454621) (xy 209.016151 71.454623) (xy 209.031002 71.548399) (xy 209.031004 71.548404) + (xy 209.0886 71.661442) (xy 209.178308 71.75115) (xy 209.291346 71.808746) (xy 209.385131 71.8236) + (xy 210.948168 71.823599) (xy 210.948171 71.823599) (xy 210.948172 71.823598) (xy 210.995061 71.816172) + (xy 211.041949 71.808747) (xy 211.041949 71.808746) (xy 211.041954 71.808746) (xy 211.154992 71.75115) + (xy 211.2447 71.661442) (xy 211.302296 71.548404) (xy 211.31715 71.454619) (xy 211.317149 70.191582) + (xy 211.317149 70.191581) (xy 211.317149 70.191578) (xy 211.317148 70.191576) (xy 211.302297 70.0978) + (xy 211.302296 70.097798) (xy 211.302296 70.097796) (xy 211.2447 69.984758) (xy 211.154992 69.89505) + (xy 211.041954 69.837454) (xy 211.041955 69.837454) (xy 210.948171 69.8226) (xy 209.385128 69.8226) + (xy 209.385126 69.822601) (xy 209.29135 69.837452) (xy 209.291345 69.837454) (xy 209.178309 69.895049) + (xy 209.088599 69.984759) (xy 209.031004 70.097795) (xy 209.01615 70.191578) (xy 94.630835 70.191578) + (xy 94.59874 70.135989) (xy 94.598739 70.135987) (xy 94.514863 70.052111) (xy 94.51486 70.052109) + (xy 94.514858 70.052107) (xy 94.412139 69.992802) (xy 94.41214 69.992802) (xy 94.382119 69.984758) + (xy 94.297559 69.9621) (xy 94.178941 69.9621) (xy 94.108817 69.980889) (xy 94.064359 69.992802) + (xy 93.961641 70.052107) (xy 93.877757 70.135991) (xy 93.818452 70.238709) (xy 93.818451 70.238714) + (xy 93.78775 70.353291) (xy 80.791772 70.353291) (xy 80.790648 69.240691) (xy 93.3995 69.240691) + (xy 93.3995 69.359309) (xy 93.411606 69.404489) (xy 93.430202 69.47389) (xy 93.489507 69.576608) + (xy 93.489509 69.57661) (xy 93.489511 69.576613) (xy 93.573387 69.660489) (xy 93.573389 69.66049) + (xy 93.573391 69.660492) (xy 93.67611 69.719797) (xy 93.676111 69.719797) (xy 93.676114 69.719799) + (xy 93.790691 69.7505) (xy 93.790693 69.7505) (xy 93.909307 69.7505) (xy 93.909309 69.7505) (xy 94.023886 69.719799) + (xy 94.023888 69.719797) (xy 94.02389 69.719797) (xy 94.126608 69.660492) (xy 94.126608 69.660491) + (xy 94.126613 69.660489) (xy 94.210489 69.576613) (xy 94.210492 69.576608) (xy 94.269797 69.47389) + (xy 94.269797 69.473888) (xy 94.269799 69.473886) (xy 94.3005 69.359309) (xy 94.3005 69.240691) + (xy 94.269799 69.126114) (xy 94.269797 69.126111) (xy 94.269797 69.126109) (xy 94.212981 69.027702) + (xy 94.210492 69.023391) (xy 94.21049 69.023389) (xy 94.210489 69.023387) (xy 94.171793 68.984691) + (xy 147.21075 68.984691) (xy 147.21075 69.103309) (xy 147.216861 69.126114) (xy 147.241452 69.21789) + (xy 147.300757 69.320608) (xy 147.300759 69.32061) (xy 147.300761 69.320613) (xy 147.384637 69.404489) + (xy 147.384639 69.40449) (xy 147.384641 69.404492) (xy 147.48736 69.463797) (xy 147.487361 69.463797) + (xy 147.487364 69.463799) (xy 147.601941 69.4945) (xy 147.601943 69.4945) (xy 147.720557 69.4945) + (xy 147.720559 69.4945) (xy 147.835136 69.463799) (xy 147.835138 69.463797) (xy 147.83514 69.463797) + (xy 147.937858 69.404492) (xy 147.937858 69.404491) (xy 147.937863 69.404489) (xy 148.021739 69.320613) + (xy 148.067882 69.240692) (xy 148.081047 69.21789) (xy 148.081047 69.217888) (xy 148.081049 69.217886) + (xy 148.11175 69.103309) (xy 148.11175 68.984691) (xy 148.081049 68.870114) (xy 148.081047 68.870111) + (xy 148.081047 68.870109) (xy 148.021742 68.767391) (xy 148.02174 68.767389) (xy 148.021739 68.767387) + (xy 147.937863 68.683511) (xy 147.93786 68.683509) (xy 147.937858 68.683507) (xy 147.835139 68.624202) + (xy 147.83514 68.624202) (xy 147.821601 68.620574) (xy 147.720559 68.5935) (xy 147.601941 68.5935) + (xy 147.531817 68.612289) (xy 147.487359 68.624202) (xy 147.384641 68.683507) (xy 147.300757 68.767391) + (xy 147.241452 68.870109) (xy 147.241451 68.870114) (xy 147.21075 68.984691) (xy 94.171793 68.984691) + (xy 94.126613 68.939511) (xy 94.12661 68.939509) (xy 94.126608 68.939507) (xy 94.023889 68.880202) + (xy 94.02389 68.880202) (xy 93.986222 68.870109) (xy 93.909309 68.8495) (xy 93.790691 68.8495) (xy 93.720567 68.868289) + (xy 93.676109 68.880202) (xy 93.573391 68.939507) (xy 93.489507 69.023391) (xy 93.430202 69.126109) + (xy 93.430201 69.126114) (xy 93.3995 69.240691) (xy 80.790648 69.240691) (xy 80.789621 68.224556) + (xy 209.01615 68.224556) (xy 209.01615 68.421643) (xy 209.054599 68.614934) (xy 209.054599 68.614936) + (xy 209.130017 68.797013) (xy 209.130018 68.797014) (xy 209.239511 68.960882) (xy 209.378868 69.100239) + (xy 209.542736 69.209732) (xy 209.724815 69.285151) (xy 209.918109 69.3236) (xy 209.91811 69.3236) + (xy 210.41519 69.3236) (xy 210.415191 69.3236) (xy 210.608485 69.285151) (xy 210.790564 69.209732) + (xy 210.954432 69.100239) (xy 211.093789 68.960882) (xy 211.203282 68.797014) (xy 211.278701 68.614935) + (xy 211.31715 68.421641) (xy 211.31715 68.224559) (xy 211.278701 68.031265) (xy 211.203282 67.849186) + (xy 211.093789 67.685318) (xy 210.954432 67.545961) (xy 210.790564 67.436468) (xy 210.790565 67.436468) + (xy 210.790563 67.436467) (xy 210.608485 67.361049) (xy 210.415193 67.3226) (xy 210.415191 67.3226) + (xy 209.918109 67.3226) (xy 209.918106 67.3226) (xy 209.724815 67.361049) (xy 209.724813 67.361049) + (xy 209.542736 67.436467) (xy 209.378868 67.545961) (xy 209.378864 67.545964) (xy 209.239514 67.685314) + (xy 209.239511 67.685318) (xy 209.130017 67.849186) (xy 209.054599 68.031263) (xy 209.054599 68.031265) + (xy 209.01615 68.224556) (xy 80.789621 68.224556) (xy 80.789032 67.641591) (xy 91.74805 67.641591) + (xy 91.74805 67.760209) (xy 91.775124 67.861251) (xy 91.778752 67.87479) (xy 91.838057 67.977508) + (xy 91.838059 67.97751) (xy 91.838061 67.977513) (xy 91.921937 68.061389) (xy 91.921939 68.06139) + (xy 91.921941 68.061392) (xy 92.02466 68.120697) (xy 92.024661 68.120697) (xy 92.024664 68.120699) + (xy 92.139241 68.1514) (xy 92.139243 68.1514) (xy 92.257857 68.1514) (xy 92.257859 68.1514) (xy 92.372436 68.120699) + (xy 92.372438 68.120697) (xy 92.37244 68.120697) (xy 92.475158 68.061392) (xy 92.475158 68.061391) + (xy 92.475163 68.061389) (xy 92.559039 67.977513) (xy 92.559042 67.977508) (xy 92.618347 67.87479) + (xy 92.618347 67.874788) (xy 92.618349 67.874786) (xy 92.64905 67.760209) (xy 92.64905 67.641591) + (xy 92.635411 67.590691) (xy 120.2495 67.590691) (xy 120.2495 67.709309) (xy 120.263138 67.760207) + (xy 120.280202 67.82389) (xy 120.339507 67.926608) (xy 120.339509 67.92661) (xy 120.339511 67.926613) + (xy 120.423387 68.010489) (xy 120.423389 68.01049) (xy 120.423391 68.010492) (xy 120.52611 68.069797) + (xy 120.526111 68.069797) (xy 120.526114 68.069799) (xy 120.640691 68.1005) (xy 120.640693 68.1005) + (xy 120.759307 68.1005) (xy 120.759309 68.1005) (xy 120.873886 68.069799) (xy 120.873888 68.069797) + (xy 120.87389 68.069797) (xy 120.976608 68.010492) (xy 120.976608 68.010491) (xy 120.976613 68.010489) + (xy 121.060489 67.926613) (xy 121.060492 67.926608) (xy 121.119797 67.82389) (xy 121.119797 67.823888) + (xy 121.119799 67.823886) (xy 121.1505 67.709309) (xy 121.1505 67.590691) (xy 121.119799 67.476114) + (xy 121.119797 67.476111) (xy 121.119797 67.476109) (xy 121.060492 67.373391) (xy 121.06049 67.373389) + (xy 121.060489 67.373387) (xy 120.976613 67.289511) (xy 120.97661 67.289509) (xy 120.976608 67.289507) + (xy 120.873889 67.230202) (xy 120.87389 67.230202) (xy 120.860351 67.226574) (xy 120.759309 67.1995) + (xy 120.640691 67.1995) (xy 120.570567 67.218289) (xy 120.526109 67.230202) (xy 120.423391 67.289507) + (xy 120.339507 67.373391) (xy 120.280202 67.476109) (xy 120.280201 67.476114) (xy 120.2495 67.590691) + (xy 92.635411 67.590691) (xy 92.618349 67.527014) (xy 92.618347 67.527011) (xy 92.618347 67.527009) + (xy 92.559042 67.424291) (xy 92.55904 67.424289) (xy 92.559039 67.424287) (xy 92.475163 67.340411) + (xy 92.47516 67.340409) (xy 92.475158 67.340407) (xy 92.372439 67.281102) (xy 92.37244 67.281102) + (xy 92.358901 67.277474) (xy 92.257859 67.2504) (xy 92.139241 67.2504) (xy 92.069117 67.269189) + (xy 92.024659 67.281102) (xy 91.921941 67.340407) (xy 91.838057 67.424291) (xy 91.778752 67.527009) + (xy 91.778751 67.527014) (xy 91.74805 67.641591) (xy 80.789032 67.641591) (xy 80.788156 66.775102) + (xy 80.786905 65.538191) (xy 169.38045 65.538191) (xy 169.38045 65.656809) (xy 169.407079 65.756191) + (xy 169.411152 65.77139) (xy 169.470457 65.874108) (xy 169.470459 65.87411) (xy 169.470461 65.874113) + (xy 169.554337 65.957989) (xy 169.554339 65.95799) (xy 169.554341 65.957992) (xy 169.65706 66.017297) + (xy 169.657061 66.017297) (xy 169.657064 66.017299) (xy 169.771641 66.048) (xy 169.771643 66.048) + (xy 169.890257 66.048) (xy 169.890259 66.048) (xy 170.004836 66.017299) (xy 170.004838 66.017297) + (xy 170.00484 66.017297) (xy 170.107558 65.957992) (xy 170.107558 65.957991) (xy 170.107563 65.957989) + (xy 170.130502 65.93505) (xy 188.13365 65.93505) (xy 188.13365 66.116149) (xy 188.161978 66.295006) + (xy 188.161979 66.295009) (xy 188.217939 66.467239) (xy 188.300154 66.628594) (xy 188.406597 66.775101) + (xy 188.534649 66.903153) (xy 188.681156 67.009596) (xy 188.842511 67.091811) (xy 189.014741 67.147771) + (xy 189.086286 67.159102) (xy 189.193601 67.1761) (xy 189.193604 67.1761) (xy 189.374699 67.1761) + (xy 189.464127 67.161935) (xy 189.553559 67.147771) (xy 189.725789 67.091811) (xy 189.887144 67.009596) + (xy 190.033651 66.903153) (xy 190.161703 66.775101) (xy 190.268146 66.628594) (xy 190.350361 66.467239) + (xy 190.406321 66.295009) (xy 190.43465 66.116146) (xy 190.43465 65.935054) (xy 190.43465 65.93505) + (xy 193.21365 65.93505) (xy 193.21365 66.116149) (xy 193.241978 66.295006) (xy 193.241979 66.295009) + (xy 193.297939 66.467239) (xy 193.380154 66.628594) (xy 193.486597 66.775101) (xy 193.614649 66.903153) + (xy 193.761156 67.009596) (xy 193.922511 67.091811) (xy 194.094741 67.147771) (xy 194.166286 67.159102) + (xy 194.273601 67.1761) (xy 194.273604 67.1761) (xy 194.454699 67.1761) (xy 194.544127 67.161935) + (xy 194.633559 67.147771) (xy 194.805789 67.091811) (xy 194.967144 67.009596) (xy 195.113651 66.903153) + (xy 195.241703 66.775101) (xy 195.348146 66.628594) (xy 195.430361 66.467239) (xy 195.486321 66.295009) + (xy 195.51465 66.116146) (xy 195.51465 65.935054) (xy 195.51465 65.93505) (xy 195.488728 65.77139) + (xy 195.486321 65.756191) (xy 195.430361 65.583961) (xy 195.348146 65.422606) (xy 195.241703 65.276099) + (xy 195.113651 65.148047) (xy 194.967144 65.041604) (xy 194.967143 65.041603) (xy 194.967141 65.041602) + (xy 194.805787 64.959388) (xy 194.633556 64.903428) (xy 194.454699 64.8751) (xy 194.454696 64.8751) + (xy 194.273604 64.8751) (xy 194.273601 64.8751) (xy 194.094743 64.903428) (xy 193.922512 64.959388) + (xy 193.761158 65.041602) (xy 193.687902 65.094825) (xy 193.614649 65.148047) (xy 193.486597 65.276099) + (xy 193.433375 65.349352) (xy 193.380152 65.422608) (xy 193.297938 65.583962) (xy 193.241978 65.756193) + (xy 193.21365 65.93505) (xy 190.43465 65.93505) (xy 190.408728 65.77139) (xy 190.406321 65.756191) + (xy 190.350361 65.583961) (xy 190.268146 65.422606) (xy 190.161703 65.276099) (xy 190.033651 65.148047) + (xy 189.887144 65.041604) (xy 189.887143 65.041603) (xy 189.887141 65.041602) (xy 189.725787 64.959388) + (xy 189.553556 64.903428) (xy 189.374699 64.8751) (xy 189.374696 64.8751) (xy 189.193604 64.8751) + (xy 189.193601 64.8751) (xy 189.014743 64.903428) (xy 188.842512 64.959388) (xy 188.681158 65.041602) + (xy 188.607902 65.094825) (xy 188.534649 65.148047) (xy 188.406597 65.276099) (xy 188.353375 65.349352) + (xy 188.300152 65.422608) (xy 188.217938 65.583962) (xy 188.161978 65.756193) (xy 188.13365 65.93505) + (xy 170.130502 65.93505) (xy 170.191439 65.874113) (xy 170.250749 65.771386) (xy 170.28145 65.656809) + (xy 170.28145 65.538191) (xy 170.250749 65.423614) (xy 170.250747 65.423611) (xy 170.250747 65.423609) + (xy 170.191442 65.320891) (xy 170.19144 65.320889) (xy 170.191439 65.320887) (xy 170.107563 65.237011) + (xy 170.10756 65.237009) (xy 170.107558 65.237007) (xy 170.004839 65.177702) (xy 170.00484 65.177702) + (xy 169.991301 65.174074) (xy 169.890259 65.147) (xy 169.771641 65.147) (xy 169.701517 65.165789) + (xy 169.657059 65.177702) (xy 169.554341 65.237007) (xy 169.470457 65.320891) (xy 169.411152 65.423609) + (xy 169.393987 65.487669) (xy 169.38045 65.538191) (xy 80.786905 65.538191) (xy 80.786899 65.531802) + (xy 80.78632 64.959388) (xy 80.786274 64.914191) (xy 163.72535 64.914191) (xy 163.72535 65.032809) + (xy 163.727707 65.041604) (xy 163.756052 65.14739) (xy 163.815357 65.250108) (xy 163.815359 65.25011) + (xy 163.815361 65.250113) (xy 163.899237 65.333989) (xy 163.899239 65.33399) (xy 163.899241 65.333992) + (xy 164.00196 65.393297) (xy 164.001961 65.393297) (xy 164.001964 65.393299) (xy 164.116541 65.424) + (xy 164.116543 65.424) (xy 164.235157 65.424) (xy 164.235159 65.424) (xy 164.349736 65.393299) (xy 164.349738 65.393297) + (xy 164.34974 65.393297) (xy 164.452458 65.333992) (xy 164.452458 65.333991) (xy 164.452463 65.333989) + (xy 164.536339 65.250113) (xy 164.578146 65.177702) (xy 164.595647 65.14739) (xy 164.595647 65.147388) + (xy 164.595649 65.147386) (xy 164.62635 65.032809) (xy 164.62635 64.914191) (xy 164.595649 64.799614) + (xy 164.595647 64.799611) (xy 164.595647 64.799609) (xy 164.536342 64.696891) (xy 164.53634 64.696889) + (xy 164.536339 64.696887) (xy 164.452463 64.613011) (xy 164.45246 64.613009) (xy 164.452458 64.613007) + (xy 164.349739 64.553702) (xy 164.34974 64.553702) (xy 164.336201 64.550074) (xy 164.235159 64.523) + (xy 164.116541 64.523) (xy 164.046417 64.541789) (xy 164.001959 64.553702) (xy 163.899241 64.613007) + (xy 163.815357 64.696891) (xy 163.756052 64.799609) (xy 163.756051 64.799614) (xy 163.72535 64.914191) + (xy 80.786274 64.914191) (xy 80.785492 64.140691) (xy 153.1495 64.140691) (xy 153.1495 64.259309) + (xy 153.173935 64.3505) (xy 153.180202 64.37389) (xy 153.239507 64.476608) (xy 153.239509 64.47661) + (xy 153.239511 64.476613) (xy 153.323387 64.560489) (xy 153.323389 64.56049) (xy 153.323391 64.560492) + (xy 153.42611 64.619797) (xy 153.426111 64.619797) (xy 153.426114 64.619799) (xy 153.540691 64.6505) + (xy 153.540693 64.6505) (xy 153.659307 64.6505) (xy 153.659309 64.6505) (xy 153.773886 64.619799) + (xy 153.773888 64.619797) (xy 153.77389 64.619797) (xy 153.876608 64.560492) (xy 153.876608 64.560491) + (xy 153.876613 64.560489) (xy 153.960489 64.476613) (xy 154.019799 64.373886) (xy 154.0505 64.259309) + (xy 154.0505 64.140691) (xy 154.019799 64.026114) (xy 154.019797 64.026111) (xy 154.019797 64.026109) + (xy 153.960492 63.923391) (xy 153.96049 63.923389) (xy 153.960489 63.923387) (xy 153.877793 63.840691) + (xy 156.3495 63.840691) (xy 156.3495 63.959309) (xy 156.376574 64.060351) (xy 156.380202 64.07389) + (xy 156.439507 64.176608) (xy 156.439509 64.17661) (xy 156.439511 64.176613) (xy 156.523387 64.260489) + (xy 156.523389 64.26049) (xy 156.523391 64.260492) (xy 156.62611 64.319797) (xy 156.626111 64.319797) + (xy 156.626114 64.319799) (xy 156.740691 64.3505) (xy 156.740693 64.3505) (xy 156.859307 64.3505) + (xy 156.859309 64.3505) (xy 156.973886 64.319799) (xy 156.973888 64.319797) (xy 156.97389 64.319797) + (xy 157.076608 64.260492) (xy 157.076608 64.260491) (xy 157.076613 64.260489) (xy 157.160489 64.176613) + (xy 157.219799 64.073886) (xy 157.2505 63.959309) (xy 157.2505 63.840691) (xy 157.229895 63.763791) + (xy 166.23365 63.763791) (xy 166.23365 63.882409) (xy 166.260724 63.983451) (xy 166.264352 63.99699) + (xy 166.323657 64.099708) (xy 166.323659 64.09971) (xy 166.323661 64.099713) (xy 166.407537 64.183589) + (xy 166.407539 64.18359) (xy 166.407541 64.183592) (xy 166.51026 64.242897) (xy 166.510261 64.242897) + (xy 166.510264 64.242899) (xy 166.624841 64.2736) (xy 166.624843 64.2736) (xy 166.743457 64.2736) + (xy 166.743459 64.2736) (xy 166.858036 64.242899) (xy 166.858038 64.242897) (xy 166.85804 64.242897) + (xy 166.960758 64.183592) (xy 166.960758 64.183591) (xy 166.960763 64.183589) (xy 167.044639 64.099713) + (xy 167.059548 64.07389) (xy 167.103947 63.99699) (xy 167.103947 63.996988) (xy 167.103949 63.996986) + (xy 167.13465 63.882409) (xy 167.13465 63.763791) (xy 167.103949 63.649214) (xy 167.103947 63.649211) + (xy 167.103947 63.649209) (xy 167.044642 63.546491) (xy 167.04464 63.546489) (xy 167.044639 63.546487) + (xy 166.960763 63.462611) (xy 166.96076 63.462609) (xy 166.960758 63.462607) (xy 166.858039 63.403302) + (xy 166.85804 63.403302) (xy 166.844501 63.399674) (xy 166.743459 63.3726) (xy 166.624841 63.3726) + (xy 166.554717 63.391389) (xy 166.510259 63.403302) (xy 166.407541 63.462607) (xy 166.323657 63.546491) + (xy 166.264352 63.649209) (xy 166.264217 63.649713) (xy 166.23365 63.763791) (xy 157.229895 63.763791) + (xy 157.219799 63.726114) (xy 157.219797 63.726111) (xy 157.219797 63.726109) (xy 157.160492 63.623391) + (xy 157.16049 63.623389) (xy 157.160489 63.623387) (xy 157.076613 63.539511) (xy 157.07661 63.539509) + (xy 157.076608 63.539507) (xy 156.973889 63.480202) (xy 156.97389 63.480202) (xy 156.960351 63.476574) + (xy 156.859309 63.4495) (xy 156.740691 63.4495) (xy 156.670567 63.468289) (xy 156.626109 63.480202) + (xy 156.523391 63.539507) (xy 156.439507 63.623391) (xy 156.380202 63.726109) (xy 156.370105 63.763791) + (xy 156.3495 63.840691) (xy 153.877793 63.840691) (xy 153.876613 63.839511) (xy 153.87661 63.839509) + (xy 153.876608 63.839507) (xy 153.773889 63.780202) (xy 153.77389 63.780202) (xy 153.760351 63.776574) + (xy 153.659309 63.7495) (xy 153.540691 63.7495) (xy 153.487357 63.763791) (xy 153.426109 63.780202) + (xy 153.323391 63.839507) (xy 153.239507 63.923391) (xy 153.180202 64.026109) (xy 153.180201 64.026114) + (xy 153.1495 64.140691) (xy 80.785492 64.140691) (xy 80.784656 63.313791) (xy 154.2995 63.313791) + (xy 154.2995 63.432409) (xy 154.30408 63.4495) (xy 154.330202 63.54699) (xy 154.389507 63.649708) + (xy 154.389509 63.64971) (xy 154.389511 63.649713) (xy 154.473387 63.733589) (xy 154.473389 63.73359) + (xy 154.473391 63.733592) (xy 154.57611 63.792897) (xy 154.576111 63.792897) (xy 154.576114 63.792899) + (xy 154.690691 63.8236) (xy 154.690693 63.8236) (xy 154.809307 63.8236) (xy 154.809309 63.8236) + (xy 154.923886 63.792899) (xy 154.923888 63.792897) (xy 154.92389 63.792897) (xy 155.000837 63.748471) + (xy 155.000846 63.748466) (xy 155.007982 63.744345) (xy 155.026613 63.733589) (xy 155.110489 63.649713) + (xy 155.125686 63.623391) (xy 155.169797 63.54699) (xy 155.169797 63.546988) (xy 155.169799 63.546986) + (xy 155.2005 63.432409) (xy 155.2005 63.313791) (xy 155.169799 63.199214) (xy 155.169797 63.199211) + (xy 155.169797 63.199209) (xy 155.110492 63.096491) (xy 155.11049 63.096489) (xy 155.110489 63.096487) + (xy 155.026613 63.012611) (xy 155.02661 63.012609) (xy 155.026608 63.012607) (xy 154.923889 62.953302) + (xy 154.92389 62.953302) (xy 154.910351 62.949674) (xy 154.809309 62.9226) (xy 154.690691 62.9226) + (xy 154.620567 62.941389) (xy 154.576109 62.953302) (xy 154.473391 63.012607) (xy 154.389507 63.096491) + (xy 154.330202 63.199209) (xy 154.330201 63.199214) (xy 154.2995 63.313791) (xy 80.784656 63.313791) + (xy 80.783307 61.979091) (xy 90.62005 61.979091) (xy 90.62005 62.097709) (xy 90.647124 62.198751) + (xy 90.650752 62.21229) (xy 90.710057 62.315008) (xy 90.710059 62.31501) (xy 90.710061 62.315013) + (xy 90.793937 62.398889) (xy 90.793939 62.39889) (xy 90.793941 62.398892) (xy 90.89666 62.458197) + (xy 90.896661 62.458197) (xy 90.896664 62.458199) (xy 91.011241 62.4889) (xy 91.011243 62.4889) + (xy 91.129857 62.4889) (xy 91.129859 62.4889) (xy 91.244436 62.458199) (xy 91.244438 62.458197) + (xy 91.24444 62.458197) (xy 91.347158 62.398892) (xy 91.347158 62.398891) (xy 91.347163 62.398889) + (xy 91.431039 62.315013) (xy 91.490349 62.212286) (xy 91.52105 62.097709) (xy 91.52105 61.979091) + (xy 91.490349 61.864514) (xy 91.490347 61.864511) (xy 91.490347 61.864509) (xy 91.431042 61.761791) + (xy 91.43104 61.761789) (xy 91.431039 61.761787) (xy 91.347163 61.677911) (xy 91.34716 61.677909) + (xy 91.347158 61.677907) (xy 91.244439 61.618602) (xy 91.24444 61.618602) (xy 91.214173 61.610492) + (xy 91.129859 61.5879) (xy 91.011241 61.5879) (xy 90.941117 61.606689) (xy 90.896659 61.618602) + (xy 90.793941 61.677907) (xy 90.710057 61.761791) (xy 90.650752 61.864509) (xy 90.650751 61.864514) + (xy 90.62005 61.979091) (xy 80.783307 61.979091) (xy 80.78251 61.190691) (xy 135.0495 61.190691) + (xy 135.0495 61.309309) (xy 135.068763 61.381199) (xy 135.080202 61.42389) (xy 135.139507 61.526608) + (xy 135.139509 61.52661) (xy 135.139511 61.526613) (xy 135.223387 61.610489) (xy 135.223389 61.61049) + (xy 135.223391 61.610492) (xy 135.32611 61.669797) (xy 135.326111 61.669797) (xy 135.326114 61.669799) + (xy 135.440691 61.7005) (xy 135.440693 61.7005) (xy 135.559307 61.7005) (xy 135.559309 61.7005) + (xy 135.673886 61.669799) (xy 135.673888 61.669797) (xy 135.67389 61.669797) (xy 135.776608 61.610492) + (xy 135.776608 61.610491) (xy 135.776613 61.610489) (xy 135.860489 61.526613) (xy 135.860492 61.526608) + (xy 135.919797 61.42389) (xy 135.919797 61.423888) (xy 135.919799 61.423886) (xy 135.9505 61.309309) + (xy 135.9505 61.190691) (xy 135.919799 61.076114) (xy 135.919797 61.076111) (xy 135.919797 61.076109) + (xy 135.860492 60.973391) (xy 135.86049 60.973389) (xy 135.860489 60.973387) (xy 135.777793 60.890691) + (xy 141.6995 60.890691) (xy 141.6995 61.009309) (xy 141.726574 61.110351) (xy 141.730202 61.12389) + (xy 141.789507 61.226608) (xy 141.789509 61.22661) (xy 141.789511 61.226613) (xy 141.873387 61.310489) + (xy 141.873389 61.31049) (xy 141.873391 61.310492) (xy 141.97611 61.369797) (xy 141.976111 61.369797) + (xy 141.976114 61.369799) (xy 142.090691 61.4005) (xy 142.090693 61.4005) (xy 142.209307 61.4005) + (xy 142.209309 61.4005) (xy 142.323886 61.369799) (xy 142.323888 61.369797) (xy 142.32389 61.369797) + (xy 142.426608 61.310492) (xy 142.426608 61.310491) (xy 142.426613 61.310489) (xy 142.510489 61.226613) + (xy 142.512799 61.222613) (xy 142.553913 61.151401) (xy 142.569799 61.123886) (xy 142.575666 61.101991) + (xy 155.11215 61.101991) (xy 155.11215 61.220609) (xy 155.131974 61.294591) (xy 155.142852 61.33519) + (xy 155.202157 61.437908) (xy 155.202159 61.43791) (xy 155.202161 61.437913) (xy 155.286037 61.521789) + (xy 155.286039 61.52179) (xy 155.286041 61.521792) (xy 155.38876 61.581097) (xy 155.388761 61.581097) + (xy 155.388764 61.581099) (xy 155.503341 61.6118) (xy 155.503343 61.6118) (xy 155.621957 61.6118) + (xy 155.621959 61.6118) (xy 155.736536 61.581099) (xy 155.736538 61.581097) (xy 155.73654 61.581097) + (xy 155.839258 61.521792) (xy 155.839258 61.521791) (xy 155.839263 61.521789) (xy 155.849161 61.511891) + (xy 161.19175 61.511891) (xy 161.19175 61.630509) (xy 161.210504 61.7005) (xy 161.222452 61.74509) + (xy 161.281757 61.847808) (xy 161.281759 61.84781) (xy 161.281761 61.847813) (xy 161.365637 61.931689) + (xy 161.365639 61.93169) (xy 161.365641 61.931692) (xy 161.46836 61.990997) (xy 161.468361 61.990997) + (xy 161.468364 61.990999) (xy 161.582941 62.0217) (xy 161.582943 62.0217) (xy 161.701557 62.0217) + (xy 161.701559 62.0217) (xy 161.816136 61.990999) (xy 161.816138 61.990997) (xy 161.81614 61.990997) + (xy 161.918858 61.931692) (xy 161.918858 61.931691) (xy 161.918863 61.931689) (xy 162.002739 61.847813) + (xy 162.002742 61.847808) (xy 162.062047 61.74509) (xy 162.062047 61.745088) (xy 162.062049 61.745086) + (xy 162.09275 61.630509) (xy 162.09275 61.511891) (xy 162.062049 61.397314) (xy 162.062047 61.397311) + (xy 162.062047 61.397309) (xy 162.002742 61.294591) (xy 162.00274 61.294589) (xy 162.002739 61.294587) + (xy 161.918863 61.210711) (xy 161.91886 61.210709) (xy 161.918858 61.210707) (xy 161.816139 61.151402) + (xy 161.81614 61.151402) (xy 161.802601 61.147774) (xy 161.701559 61.1207) (xy 161.582941 61.1207) + (xy 161.528506 61.135286) (xy 161.468359 61.151402) (xy 161.365641 61.210707) (xy 161.281757 61.294591) + (xy 161.222452 61.397309) (xy 161.215331 61.423886) (xy 161.19175 61.511891) (xy 155.849161 61.511891) + (xy 155.923139 61.437913) (xy 155.955883 61.381199) (xy 155.982447 61.33519) (xy 155.982447 61.335188) + (xy 155.982449 61.335186) (xy 156.01315 61.220609) (xy 156.01315 61.101991) (xy 155.982449 60.987414) + (xy 155.924296 60.886691) (xy 159.83005 60.886691) (xy 159.83005 61.005309) (xy 159.849021 61.076109) + (xy 159.860752 61.11989) (xy 159.920057 61.222608) (xy 159.920059 61.22261) (xy 159.920061 61.222613) + (xy 160.003937 61.306489) (xy 160.003939 61.30649) (xy 160.003941 61.306492) (xy 160.10666 61.365797) + (xy 160.106661 61.365797) (xy 160.106664 61.365799) (xy 160.221241 61.3965) (xy 160.221243 61.3965) + (xy 160.339857 61.3965) (xy 160.339859 61.3965) (xy 160.454436 61.365799) (xy 160.454438 61.365797) + (xy 160.45444 61.365797) (xy 160.557158 61.306492) (xy 160.557158 61.306491) (xy 160.557163 61.306489) + (xy 160.641039 61.222613) (xy 160.658955 61.191582) (xy 160.700347 61.11989) (xy 160.700347 61.119888) + (xy 160.700349 61.119886) (xy 160.73105 61.005309) (xy 160.73105 60.902091) (xy 181.24295 60.902091) + (xy 181.24295 61.020709) (xy 181.257796 61.076114) (xy 181.273652 61.13529) (xy 181.332957 61.238008) + (xy 181.332959 61.23801) (xy 181.332961 61.238013) (xy 181.416837 61.321889) (xy 181.416839 61.32189) + (xy 181.416841 61.321892) (xy 181.51956 61.381197) (xy 181.519561 61.381197) (xy 181.519564 61.381199) + (xy 181.634141 61.4119) (xy 181.634143 61.4119) (xy 181.752757 61.4119) (xy 181.752759 61.4119) + (xy 181.867336 61.381199) (xy 181.867338 61.381197) (xy 181.86734 61.381197) (xy 181.970058 61.321892) + (xy 181.970058 61.321891) (xy 181.970063 61.321889) (xy 182.053939 61.238013) (xy 182.080748 61.191578) + (xy 209.06615 61.191578) (xy 209.06615 62.454621) (xy 209.066151 62.454623) (xy 209.081002 62.548399) + (xy 209.081004 62.548404) (xy 209.1386 62.661442) (xy 209.228308 62.75115) (xy 209.341346 62.808746) + (xy 209.435131 62.8236) (xy 210.948168 62.823599) (xy 210.948171 62.823599) (xy 210.948172 62.823598) + (xy 210.995061 62.816172) (xy 211.041949 62.808747) (xy 211.041949 62.808746) (xy 211.041954 62.808746) + (xy 211.154992 62.75115) (xy 211.2447 62.661442) (xy 211.302296 62.548404) (xy 211.31715 62.454619) + (xy 211.317149 61.191582) (xy 211.317149 61.191581) (xy 211.317149 61.191578) (xy 211.317148 61.191576) + (xy 211.302297 61.0978) (xy 211.302296 61.097798) (xy 211.302296 61.097796) (xy 211.2447 60.984758) + (xy 211.154992 60.89505) (xy 211.041954 60.837454) (xy 211.041955 60.837454) (xy 210.948171 60.8226) + (xy 209.435128 60.8226) (xy 209.435126 60.822601) (xy 209.34135 60.837452) (xy 209.341345 60.837454) + (xy 209.228309 60.895049) (xy 209.138599 60.984759) (xy 209.081004 61.097795) (xy 209.06615 61.191578) + (xy 182.080748 61.191578) (xy 182.08468 61.184767) (xy 182.111573 61.13819) (xy 182.111573 61.138189) + (xy 182.113247 61.13529) (xy 182.113247 61.135288) (xy 182.113249 61.135286) (xy 182.14395 61.020709) + (xy 182.14395 60.902091) (xy 182.113249 60.787514) (xy 182.113247 60.787511) (xy 182.113247 60.787509) + (xy 182.053942 60.684791) (xy 182.05394 60.684789) (xy 182.053939 60.684787) (xy 181.970063 60.600911) + (xy 181.97006 60.600909) (xy 181.970058 60.600907) (xy 181.867339 60.541602) (xy 181.86734 60.541602) + (xy 181.853801 60.537974) (xy 181.752759 60.5109) (xy 181.634141 60.5109) (xy 181.577034 60.526202) + (xy 181.519559 60.541602) (xy 181.416841 60.600907) (xy 181.332957 60.684791) (xy 181.273652 60.787509) + (xy 181.256487 60.851569) (xy 181.24295 60.902091) (xy 160.73105 60.902091) (xy 160.73105 60.886691) + (xy 160.700349 60.772114) (xy 160.700347 60.772111) (xy 160.700347 60.772109) (xy 160.641042 60.669391) + (xy 160.64104 60.669389) (xy 160.641039 60.669387) (xy 160.557163 60.585511) (xy 160.55716 60.585509) + (xy 160.557158 60.585507) (xy 160.454439 60.526202) (xy 160.45444 60.526202) (xy 160.440901 60.522574) + (xy 160.339859 60.4955) (xy 160.221241 60.4955) (xy 160.163768 60.5109) (xy 160.106659 60.526202) + (xy 160.003941 60.585507) (xy 159.920057 60.669391) (xy 159.860752 60.772109) (xy 159.847223 60.8226) + (xy 159.83005 60.886691) (xy 155.924296 60.886691) (xy 155.923139 60.884687) (xy 155.839263 60.800811) + (xy 155.83926 60.800809) (xy 155.839258 60.800807) (xy 155.736539 60.741502) (xy 155.73654 60.741502) + (xy 155.723001 60.737874) (xy 155.621959 60.7108) (xy 155.503341 60.7108) (xy 155.433217 60.729589) + (xy 155.388759 60.741502) (xy 155.286041 60.800807) (xy 155.202157 60.884691) (xy 155.142852 60.987409) + (xy 155.125687 61.051469) (xy 155.11215 61.101991) (xy 142.575666 61.101991) (xy 142.6005 61.009309) + (xy 142.6005 60.890691) (xy 142.569799 60.776114) (xy 142.569797 60.776111) (xy 142.569797 60.776109) + (xy 142.510492 60.673391) (xy 142.51049 60.673389) (xy 142.510489 60.673387) (xy 142.426613 60.589511) + (xy 142.42661 60.589509) (xy 142.426608 60.589507) (xy 142.323889 60.530202) (xy 142.32389 60.530202) + (xy 142.308958 60.526201) (xy 142.209309 60.4995) (xy 142.090691 60.4995) (xy 142.020567 60.518289) + (xy 141.976109 60.530202) (xy 141.873391 60.589507) (xy 141.789507 60.673391) (xy 141.730202 60.776109) + (xy 141.723584 60.800807) (xy 141.6995 60.890691) (xy 135.777793 60.890691) (xy 135.776613 60.889511) + (xy 135.77661 60.889509) (xy 135.776608 60.889507) (xy 135.673889 60.830202) (xy 135.67389 60.830202) + (xy 135.660351 60.826574) (xy 135.559309 60.7995) (xy 135.440691 60.7995) (xy 135.370567 60.818289) + (xy 135.326109 60.830202) (xy 135.223391 60.889507) (xy 135.139507 60.973391) (xy 135.080202 61.076109) + (xy 135.074391 61.097796) (xy 135.0495 61.190691) (xy 80.78251 61.190691) (xy 80.781575 60.265791) + (xy 164.05085 60.265791) (xy 164.05085 60.384409) (xy 164.077924 60.485451) (xy 164.081552 60.49899) + (xy 164.140857 60.601708) (xy 164.140859 60.60171) (xy 164.140861 60.601713) (xy 164.224737 60.685589) + (xy 164.224739 60.68559) (xy 164.224741 60.685592) (xy 164.32746 60.744897) (xy 164.327461 60.744897) + (xy 164.327464 60.744899) (xy 164.442041 60.7756) (xy 164.442043 60.7756) (xy 164.560657 60.7756) + (xy 164.560659 60.7756) (xy 164.675236 60.744899) (xy 164.675238 60.744897) (xy 164.67524 60.744897) + (xy 164.777958 60.685592) (xy 164.777958 60.685591) (xy 164.777963 60.685589) (xy 164.861839 60.601713) + (xy 164.87594 60.577289) (xy 164.921147 60.49899) (xy 164.921147 60.498988) (xy 164.921149 60.498986) + (xy 164.95185 60.384409) (xy 164.95185 60.265791) (xy 164.922831 60.157491) (xy 173.91025 60.157491) + (xy 173.91025 60.276109) (xy 173.937324 60.377151) (xy 173.940952 60.39069) (xy 174.000257 60.493408) + (xy 174.000259 60.49341) (xy 174.000261 60.493413) (xy 174.084137 60.577289) (xy 174.084139 60.57729) + (xy 174.084141 60.577292) (xy 174.18686 60.636597) (xy 174.186861 60.636597) (xy 174.186864 60.636599) + (xy 174.301441 60.6673) (xy 174.301443 60.6673) (xy 174.420057 60.6673) (xy 174.420059 60.6673) + (xy 174.534636 60.636599) (xy 174.534638 60.636597) (xy 174.53464 60.636597) (xy 174.637358 60.577292) + (xy 174.637358 60.577291) (xy 174.637363 60.577289) (xy 174.721239 60.493413) (xy 174.780549 60.390686) + (xy 174.81125 60.276109) (xy 174.81125 60.157491) (xy 174.780549 60.042914) (xy 174.780547 60.042911) + (xy 174.780547 60.042909) (xy 174.721242 59.940191) (xy 174.72124 59.940189) (xy 174.721239 59.940187) + (xy 174.637363 59.856311) (xy 174.63736 59.856309) (xy 174.637358 59.856307) (xy 174.534639 59.797002) + (xy 174.53464 59.797002) (xy 174.521101 59.793374) (xy 174.420059 59.7663) (xy 174.301441 59.7663) + (xy 174.231317 59.785089) (xy 174.186859 59.797002) (xy 174.084141 59.856307) (xy 174.000257 59.940191) + (xy 173.940952 60.042909) (xy 173.925592 60.100235) (xy 173.91025 60.157491) (xy 164.922831 60.157491) + (xy 164.921149 60.151214) (xy 164.91046 60.1327) (xy 164.861842 60.048491) (xy 164.86184 60.048489) + (xy 164.861839 60.048487) (xy 164.777963 59.964611) (xy 164.77796 59.964609) (xy 164.777958 59.964607) + (xy 164.675239 59.905302) (xy 164.67524 59.905302) (xy 164.661701 59.901674) (xy 164.560659 59.8746) + (xy 164.442041 59.8746) (xy 164.371917 59.893389) (xy 164.327459 59.905302) (xy 164.224741 59.964607) + (xy 164.140857 60.048491) (xy 164.081552 60.151209) (xy 164.074742 60.176624) (xy 164.05085 60.265791) + (xy 80.781575 60.265791) (xy 80.780925 59.622891) (xy 160.24305 59.622891) (xy 160.24305 59.741509) + (xy 160.257923 59.797014) (xy 160.273752 59.85609) (xy 160.333057 59.958808) (xy 160.333059 59.95881) + (xy 160.333061 59.958813) (xy 160.416937 60.042689) (xy 160.416939 60.04269) (xy 160.416941 60.042692) + (xy 160.51966 60.101997) (xy 160.519661 60.101997) (xy 160.519664 60.101999) (xy 160.634241 60.1327) + (xy 160.634243 60.1327) (xy 160.752857 60.1327) (xy 160.752859 60.1327) (xy 160.867436 60.101999) + (xy 160.867438 60.101997) (xy 160.86744 60.101997) (xy 160.970158 60.042692) (xy 160.970158 60.042691) + (xy 160.970163 60.042689) (xy 161.054039 59.958813) (xy 161.084934 59.905302) (xy 161.113347 59.85609) + (xy 161.113347 59.856088) (xy 161.113349 59.856086) (xy 161.14405 59.741509) (xy 161.14405 59.622891) + (xy 161.113349 59.508314) (xy 161.113347 59.508311) (xy 161.113347 59.508309) (xy 161.054042 59.405591) + (xy 161.05404 59.405589) (xy 161.054039 59.405587) (xy 160.970163 59.321711) (xy 160.97016 59.321709) + (xy 160.970158 59.321707) (xy 160.867439 59.262402) (xy 160.86744 59.262402) (xy 160.853901 59.258774) + (xy 160.752859 59.2317) (xy 160.634241 59.2317) (xy 160.564117 59.250489) (xy 160.519659 59.262402) + (xy 160.416941 59.321707) (xy 160.333057 59.405591) (xy 160.273752 59.508309) (xy 160.273751 59.508314) + (xy 160.24305 59.622891) (xy 80.780925 59.622891) (xy 80.779603 58.31505) (xy 188.13365 58.31505) + (xy 188.13365 58.496149) (xy 188.161978 58.675006) (xy 188.165328 58.685318) (xy 188.217939 58.847239) + (xy 188.300154 59.008594) (xy 188.406597 59.155101) (xy 188.534649 59.283153) (xy 188.681156 59.389596) + (xy 188.842511 59.471811) (xy 189.014741 59.527771) (xy 189.086286 59.539102) (xy 189.193601 59.5561) + (xy 189.193604 59.5561) (xy 189.374699 59.5561) (xy 189.464127 59.541935) (xy 189.553559 59.527771) + (xy 189.725789 59.471811) (xy 189.887144 59.389596) (xy 190.033651 59.283153) (xy 190.161703 59.155101) + (xy 190.268146 59.008594) (xy 190.350361 58.847239) (xy 190.406321 58.675009) (xy 190.43465 58.496146) + (xy 190.43465 58.315054) (xy 190.43465 58.31505) (xy 193.21365 58.31505) (xy 193.21365 58.496149) + (xy 193.241978 58.675006) (xy 193.245328 58.685318) (xy 193.297939 58.847239) (xy 193.380154 59.008594) + (xy 193.486597 59.155101) (xy 193.614649 59.283153) (xy 193.761156 59.389596) (xy 193.922511 59.471811) + (xy 194.094741 59.527771) (xy 194.166286 59.539102) (xy 194.273601 59.5561) (xy 194.273604 59.5561) + (xy 194.454699 59.5561) (xy 194.544127 59.541935) (xy 194.633559 59.527771) (xy 194.805789 59.471811) + (xy 194.967144 59.389596) (xy 195.113651 59.283153) (xy 195.241703 59.155101) (xy 195.348146 59.008594) + (xy 195.430361 58.847239) (xy 195.486321 58.675009) (xy 195.51465 58.496146) (xy 195.51465 58.315054) + (xy 195.51465 58.31505) (xy 195.486321 58.136193) (xy 195.486321 58.136191) (xy 195.430361 57.963961) + (xy 195.348146 57.802606) (xy 195.241703 57.656099) (xy 195.113651 57.528047) (xy 194.967144 57.421604) + (xy 194.967143 57.421603) (xy 194.967141 57.421602) (xy 194.805787 57.339388) (xy 194.633556 57.283428) + (xy 194.454699 57.2551) (xy 194.454696 57.2551) (xy 194.273604 57.2551) (xy 194.273601 57.2551) + (xy 194.094743 57.283428) (xy 193.922512 57.339388) (xy 193.761158 57.421602) (xy 193.738079 57.43837) + (xy 193.614649 57.528047) (xy 193.486597 57.656099) (xy 193.433375 57.729352) (xy 193.380152 57.802608) + (xy 193.297938 57.963962) (xy 193.241978 58.136193) (xy 193.21365 58.31505) (xy 190.43465 58.31505) + (xy 190.406321 58.136193) (xy 190.406321 58.136191) (xy 190.350361 57.963961) (xy 190.268146 57.802606) + (xy 190.161703 57.656099) (xy 190.033651 57.528047) (xy 189.887144 57.421604) (xy 189.887143 57.421603) + (xy 189.887141 57.421602) (xy 189.725787 57.339388) (xy 189.553556 57.283428) (xy 189.374699 57.2551) + (xy 189.374696 57.2551) (xy 189.193604 57.2551) (xy 189.193601 57.2551) (xy 189.014743 57.283428) + (xy 188.842512 57.339388) (xy 188.681158 57.421602) (xy 188.658079 57.43837) (xy 188.534649 57.528047) + (xy 188.406597 57.656099) (xy 188.353375 57.729352) (xy 188.300152 57.802608) (xy 188.217938 57.963962) + (xy 188.161978 58.136193) (xy 188.13365 58.31505) (xy 80.779603 58.31505) (xy 80.778694 57.415491) + (xy 123.74245 57.415491) (xy 123.74245 57.534109) (xy 123.753191 57.574195) (xy 123.773152 57.64869) + (xy 123.832457 57.751408) (xy 123.832459 57.75141) (xy 123.832461 57.751413) (xy 123.916337 57.835289) + (xy 123.916339 57.83529) (xy 123.916341 57.835292) (xy 124.01906 57.894597) (xy 124.019061 57.894597) + (xy 124.019064 57.894599) (xy 124.133641 57.9253) (xy 124.133643 57.9253) (xy 124.252257 57.9253) + (xy 124.252259 57.9253) (xy 124.366836 57.894599) (xy 124.366838 57.894597) (xy 124.36684 57.894597) + (xy 124.469558 57.835292) (xy 124.469558 57.835291) (xy 124.469563 57.835289) (xy 124.553439 57.751413) + (xy 124.581642 57.702564) (xy 124.612747 57.64869) (xy 124.612747 57.648688) (xy 124.612749 57.648686) + (xy 124.64345 57.534109) (xy 124.64345 57.415491) (xy 124.643449 57.415488) (xy 124.642884 57.411198) + (xy 124.654029 57.351036) (xy 124.698409 57.308915) (xy 124.75907 57.300924) (xy 124.760236 57.301148) + (xy 124.873109 57.3236) (xy 124.87311 57.3236) (xy 125.07019 57.3236) (xy 125.070191 57.3236) (xy 125.263485 57.285151) + (xy 125.445564 57.209732) (xy 125.609432 57.100239) (xy 125.748789 56.960882) (xy 125.858282 56.797014) + (xy 125.933701 56.614935) (xy 125.97215 56.421641) (xy 125.97215 56.224559) (xy 125.972149 56.224556) + (xy 126.51115 56.224556) (xy 126.51115 56.421643) (xy 126.549599 56.614934) (xy 126.549599 56.614936) + (xy 126.625017 56.797013) (xy 126.625018 56.797014) (xy 126.734511 56.960882) (xy 126.873868 57.100239) + (xy 127.037736 57.209732) (xy 127.219815 57.285151) (xy 127.413109 57.3236) (xy 127.41311 57.3236) + (xy 127.61019 57.3236) (xy 127.610191 57.3236) (xy 127.803485 57.285151) (xy 127.985564 57.209732) + (xy 128.149432 57.100239) (xy 128.288789 56.960882) (xy 128.398282 56.797014) (xy 128.473701 56.614935) + (xy 128.51215 56.421641) (xy 128.51215 56.224559) (xy 128.512149 56.224556) (xy 129.05115 56.224556) + (xy 129.05115 56.421643) (xy 129.089599 56.614934) (xy 129.089599 56.614936) (xy 129.165017 56.797013) + (xy 129.165018 56.797014) (xy 129.274511 56.960882) (xy 129.413868 57.100239) (xy 129.577736 57.209732) + (xy 129.759815 57.285151) (xy 129.953109 57.3236) (xy 129.95311 57.3236) (xy 130.15019 57.3236) + (xy 130.150191 57.3236) (xy 130.343485 57.285151) (xy 130.525564 57.209732) (xy 130.689432 57.100239) + (xy 130.828789 56.960882) (xy 130.938282 56.797014) (xy 131.013701 56.614935) (xy 131.05215 56.421641) + (xy 131.05215 56.224559) (xy 131.052149 56.224556) (xy 131.59115 56.224556) (xy 131.59115 56.421643) + (xy 131.629599 56.614934) (xy 131.629599 56.614936) (xy 131.705017 56.797013) (xy 131.705018 56.797014) + (xy 131.814511 56.960882) (xy 131.953868 57.100239) (xy 132.117736 57.209732) (xy 132.299815 57.285151) + (xy 132.493109 57.3236) (xy 132.49311 57.3236) (xy 132.69019 57.3236) (xy 132.690191 57.3236) (xy 132.883485 57.285151) + (xy 133.065564 57.209732) (xy 133.229432 57.100239) (xy 133.368789 56.960882) (xy 133.478282 56.797014) + (xy 133.553701 56.614935) (xy 133.59215 56.421641) (xy 133.59215 56.224559) (xy 133.592149 56.224556) + (xy 134.13115 56.224556) (xy 134.13115 56.421643) (xy 134.169599 56.614934) (xy 134.169599 56.614936) + (xy 134.245017 56.797013) (xy 134.245018 56.797014) (xy 134.354511 56.960882) (xy 134.493868 57.100239) + (xy 134.657736 57.209732) (xy 134.839815 57.285151) (xy 135.033109 57.3236) (xy 135.03311 57.3236) + (xy 135.23019 57.3236) (xy 135.230191 57.3236) (xy 135.423485 57.285151) (xy 135.605564 57.209732) + (xy 135.769432 57.100239) (xy 135.908789 56.960882) (xy 136.018282 56.797014) (xy 136.093701 56.614935) + (xy 136.13215 56.421641) (xy 136.13215 56.224559) (xy 136.132149 56.224556) (xy 136.67115 56.224556) + (xy 136.67115 56.421643) (xy 136.709599 56.614934) (xy 136.709599 56.614936) (xy 136.785017 56.797013) + (xy 136.785018 56.797014) (xy 136.894511 56.960882) (xy 137.033868 57.100239) (xy 137.197736 57.209732) + (xy 137.379815 57.285151) (xy 137.573109 57.3236) (xy 137.57311 57.3236) (xy 137.77019 57.3236) + (xy 137.770191 57.3236) (xy 137.963485 57.285151) (xy 138.145564 57.209732) (xy 138.309432 57.100239) + (xy 138.448789 56.960882) (xy 138.558282 56.797014) (xy 138.633701 56.614935) (xy 138.67215 56.421641) + (xy 138.67215 56.224559) (xy 138.672149 56.224556) (xy 139.21115 56.224556) (xy 139.21115 56.421643) + (xy 139.249599 56.614934) (xy 139.249599 56.614936) (xy 139.325017 56.797013) (xy 139.325018 56.797014) + (xy 139.434511 56.960882) (xy 139.573868 57.100239) (xy 139.737736 57.209732) (xy 139.919815 57.285151) + (xy 140.113109 57.3236) (xy 140.11311 57.3236) (xy 140.31019 57.3236) (xy 140.310191 57.3236) (xy 140.503485 57.285151) + (xy 140.685564 57.209732) (xy 140.849432 57.100239) (xy 140.988789 56.960882) (xy 141.098282 56.797014) + (xy 141.173701 56.614935) (xy 141.21215 56.421641) (xy 141.21215 56.224559) (xy 141.212149 56.224556) + (xy 141.75115 56.224556) (xy 141.75115 56.421643) (xy 141.789599 56.614934) (xy 141.789599 56.614936) + (xy 141.865017 56.797013) (xy 141.865018 56.797014) (xy 141.974511 56.960882) (xy 142.113868 57.100239) + (xy 142.277736 57.209732) (xy 142.459815 57.285151) (xy 142.653109 57.3236) (xy 142.65311 57.3236) + (xy 142.85019 57.3236) (xy 142.850191 57.3236) (xy 143.043485 57.285151) (xy 143.225564 57.209732) + (xy 143.389432 57.100239) (xy 143.528789 56.960882) (xy 143.638282 56.797014) (xy 143.713701 56.614935) + (xy 143.75215 56.421641) (xy 143.75215 56.224559) (xy 143.752149 56.224556) (xy 144.29115 56.224556) + (xy 144.29115 56.421643) (xy 144.329599 56.614934) (xy 144.329599 56.614936) (xy 144.405017 56.797013) + (xy 144.405018 56.797014) (xy 144.514511 56.960882) (xy 144.653868 57.100239) (xy 144.817736 57.209732) + (xy 144.999815 57.285151) (xy 145.193109 57.3236) (xy 145.19311 57.3236) (xy 145.39019 57.3236) + (xy 145.390191 57.3236) (xy 145.583485 57.285151) (xy 145.765564 57.209732) (xy 145.929432 57.100239) + (xy 146.068789 56.960882) (xy 146.178282 56.797014) (xy 146.253701 56.614935) (xy 146.29215 56.421641) + (xy 146.29215 56.224559) (xy 146.292149 56.224556) (xy 146.83115 56.224556) (xy 146.83115 56.421643) + (xy 146.869599 56.614934) (xy 146.869599 56.614936) (xy 146.945017 56.797013) (xy 146.945018 56.797014) + (xy 147.054511 56.960882) (xy 147.193868 57.100239) (xy 147.357736 57.209732) (xy 147.539815 57.285151) + (xy 147.733109 57.3236) (xy 147.73311 57.3236) (xy 147.93019 57.3236) (xy 147.930191 57.3236) (xy 148.123485 57.285151) + (xy 148.305564 57.209732) (xy 148.469432 57.100239) (xy 148.608789 56.960882) (xy 148.718282 56.797014) + (xy 148.793701 56.614935) (xy 148.83215 56.421641) (xy 148.83215 56.224559) (xy 148.832149 56.224556) + (xy 149.37115 56.224556) (xy 149.37115 56.421643) (xy 149.409599 56.614934) (xy 149.409599 56.614936) + (xy 149.485017 56.797013) (xy 149.485018 56.797014) (xy 149.594511 56.960882) (xy 149.733868 57.100239) + (xy 149.897736 57.209732) (xy 150.079815 57.285151) (xy 150.273109 57.3236) (xy 150.27311 57.3236) + (xy 150.47019 57.3236) (xy 150.470191 57.3236) (xy 150.663485 57.285151) (xy 150.845564 57.209732) + (xy 151.009432 57.100239) (xy 151.148789 56.960882) (xy 151.258282 56.797014) (xy 151.333701 56.614935) + (xy 151.368813 56.438415) (xy 151.39871 56.385032) (xy 151.454275 56.359416) (xy 151.514285 56.371353) + (xy 151.555817 56.416283) (xy 151.563692 56.442243) (xy 151.59489 56.639221) (xy 151.660554 56.841315) (xy 151.757026 57.030653) (xy 151.75703 57.030659) (xy 151.796378 57.084816) (xy 151.796379 57.084816) (xy 152.428687 56.452507) (xy 152.445725 56.516093) (xy 152.511551 56.630107) (xy 152.604643 56.723199) (xy 152.718657 56.789025) (xy 152.782239 56.806062) (xy 152.149932 57.438369) (xy 152.149932 57.43837) @@ -49762,497 +57976,566 @@ (xy 152.8054 57.6731) (xy 153.0179 57.6731) (xy 153.227771 57.639859) (xy 153.429865 57.574195) (xy 153.619206 57.47772) (xy 153.673366 57.43837) (xy 153.041058 56.806062) (xy 153.104643 56.789025) (xy 153.218657 56.723199) (xy 153.311749 56.630107) (xy 153.377575 56.516093) (xy 153.394612 56.452508) - (xy 154.02692 57.084816) (xy 154.06627 57.030656) (xy 154.162746 56.841313) (xy 154.192377 56.750116) - (xy 154.22834 56.700616) (xy 154.286531 56.681708) (xy 154.344722 56.700615) (xy 154.380686 56.750113) - (xy 154.385438 56.764737) (xy 154.462114 56.915223) (xy 154.467654 56.926094) (xy 154.574097 57.072601) - (xy 154.702149 57.200653) (xy 154.848656 57.307096) (xy 155.010011 57.389311) (xy 155.182241 57.445271) - (xy 155.253786 57.456602) (xy 155.361101 57.4736) (xy 155.361104 57.4736) (xy 155.542199 57.4736) - (xy 155.631627 57.459435) (xy 155.721059 57.445271) (xy 155.893289 57.389311) (xy 156.054644 57.307096) - (xy 156.201151 57.200653) (xy 156.329203 57.072601) (xy 156.435646 56.926094) (xy 156.517861 56.764739) - (xy 156.573821 56.592509) (xy 156.60215 56.413646) (xy 156.60215 56.232554) (xy 156.60215 56.23255) - (xy 156.573821 56.053693) (xy 156.573821 56.053691) (xy 156.517861 55.881461) (xy 156.435646 55.720106) - (xy 156.329203 55.573599) (xy 156.201151 55.445547) (xy 156.086768 55.362443) (xy 166.14125 55.362443) - (xy 166.14125 55.520557) (xy 166.182173 55.673284) (xy 166.26123 55.810216) (xy 166.373034 55.92202) - (xy 166.509966 56.001077) (xy 166.662693 56.042) (xy 166.662695 56.042) (xy 166.820805 56.042) (xy 166.820807 56.042) - (xy 166.973534 56.001077) (xy 167.110466 55.92202) (xy 167.22227 55.810216) (xy 167.301327 55.673284) - (xy 167.34225 55.520557) (xy 167.34225 55.362443) (xy 167.321109 55.283543) (xy 169.71245 55.283543) - (xy 169.71245 55.441657) (xy 169.753373 55.594384) (xy 169.83243 55.731316) (xy 169.944234 55.84312) - (xy 170.081166 55.922177) (xy 170.233893 55.9631) (xy 170.233895 55.9631) (xy 170.392005 55.9631) - (xy 170.392007 55.9631) (xy 170.544734 55.922177) (xy 170.681666 55.84312) (xy 170.79347 55.731316) - (xy 170.872527 55.594384) (xy 170.91345 55.441657) (xy 170.91345 55.283543) (xy 170.872527 55.130816) - (xy 170.79347 54.993884) (xy 170.681666 54.88208) (xy 170.575404 54.82073) (xy 187.98365 54.82073) - (xy 187.98365 56.91046) (xy 187.983651 56.910463) (xy 187.986564 56.93559) (xy 188.00524 56.977887) - (xy 188.031944 57.038365) (xy 188.111385 57.117806) (xy 188.214159 57.163185) (xy 188.239285 57.1661) - (xy 188.472943 57.166099) (xy 188.531132 57.185006) (xy 188.567096 57.234506) (xy 188.567097 57.295691) - (xy 188.531133 57.345191) (xy 188.436938 57.413627) (xy 188.292179 57.558386) (xy 188.171864 57.723986) - (xy 188.171862 57.72399) (xy 188.07893 57.90638) (xy 188.015671 58.10107) (xy 187.98365 58.303244) - (xy 187.98365 58.507955) (xy 188.015671 58.710129) (xy 188.07893 58.904819) (xy 188.171862 59.087209) - (xy 188.171864 59.087213) (xy 188.292179 59.252813) (xy 188.292181 59.252815) (xy 188.292184 59.252819) - (xy 188.436931 59.397566) (xy 188.436934 59.397568) (xy 188.436936 59.39757) (xy 188.602536 59.517885) - (xy 188.60254 59.517887) (xy 188.784931 59.61082) (xy 188.979616 59.674077) (xy 188.979617 59.674077) - (xy 188.97962 59.674078) (xy 189.181795 59.7061) (xy 189.181798 59.7061) (xy 189.386505 59.7061) - (xy 189.588679 59.674078) (xy 189.58868 59.674077) (xy 189.588684 59.674077) (xy 189.783369 59.61082) - (xy 189.96576 59.517887) (xy 190.131369 59.397566) (xy 190.276116 59.252819) (xy 190.396437 59.08721) - (xy 190.48937 58.904819) (xy 190.552627 58.710134) (xy 190.552628 58.710129) (xy 190.58465 58.507955) - (xy 190.58465 58.303244) (xy 190.552628 58.10107) (xy 190.552627 58.101066) (xy 190.48937 57.906381) - (xy 190.396437 57.72399) (xy 190.396435 57.723986) (xy 190.27612 57.558386) (xy 190.276118 57.558384) - (xy 190.276116 57.558381) (xy 190.131369 57.413634) (xy 190.131365 57.413631) (xy 190.131363 57.413629) - (xy 190.037166 57.345192) (xy 190.001202 57.295692) (xy 190.001201 57.234507) (xy 190.037165 57.185007) - (xy 190.095355 57.166099) (xy 190.329011 57.166099) (xy 190.329014 57.166099) (xy 190.354141 57.163185) - (xy 190.456915 57.117806) (xy 190.536356 57.038365) (xy 190.581735 56.935591) (xy 190.58465 56.910465) - (xy 190.584649 55.763244) (xy 193.06365 55.763244) (xy 193.06365 55.967955) (xy 193.095671 56.170129) - (xy 193.15893 56.364819) (xy 193.251862 56.547209) (xy 193.251864 56.547213) (xy 193.372179 56.712813) - (xy 193.372181 56.712815) (xy 193.372184 56.712819) (xy 193.516931 56.857566) (xy 193.516934 56.857568) - (xy 193.516936 56.85757) (xy 193.682536 56.977885) (xy 193.68254 56.977887) (xy 193.818947 57.04739) - (xy 193.862212 57.090655) (xy 193.871783 57.151087) (xy 193.844006 57.205604) (xy 193.818947 57.22381) - (xy 193.68254 57.293312) (xy 193.682536 57.293314) (xy 193.516936 57.413629) (xy 193.372179 57.558386) - (xy 193.251864 57.723986) (xy 193.251862 57.72399) (xy 193.15893 57.90638) (xy 193.095671 58.10107) - (xy 193.06365 58.303244) (xy 193.06365 58.507955) (xy 193.095671 58.710129) (xy 193.15893 58.904819) - (xy 193.251862 59.087209) (xy 193.251864 59.087213) (xy 193.372179 59.252813) (xy 193.372181 59.252815) - (xy 193.372184 59.252819) (xy 193.516931 59.397566) (xy 193.516934 59.397568) (xy 193.516936 59.39757) - (xy 193.682536 59.517885) (xy 193.68254 59.517887) (xy 193.864931 59.61082) (xy 194.059616 59.674077) - (xy 194.059617 59.674077) (xy 194.05962 59.674078) (xy 194.261795 59.7061) (xy 194.261798 59.7061) - (xy 194.466505 59.7061) (xy 194.668679 59.674078) (xy 194.66868 59.674077) (xy 194.668684 59.674077) - (xy 194.863369 59.61082) (xy 195.04576 59.517887) (xy 195.211369 59.397566) (xy 195.356116 59.252819) - (xy 195.476437 59.08721) (xy 195.56937 58.904819) (xy 195.632627 58.710134) (xy 195.632628 58.710129) - (xy 195.66465 58.507955) (xy 195.66465 58.303244) (xy 195.632628 58.10107) (xy 195.632627 58.101066) - (xy 195.56937 57.906381) (xy 195.476437 57.72399) (xy 195.476435 57.723986) (xy 195.35612 57.558386) - (xy 195.356118 57.558384) (xy 195.356116 57.558381) (xy 195.211369 57.413634) (xy 195.211365 57.413631) - (xy 195.211363 57.413629) (xy 195.045763 57.293314) (xy 195.045759 57.293312) (xy 194.947188 57.243088) - (xy 194.909351 57.223809) (xy 194.899162 57.21362) (xy 194.886157 57.207419) (xy 194.87807 57.192528) - (xy 194.866087 57.180545) (xy 194.863832 57.166311) (xy 194.856957 57.153651) (xy 194.859166 57.136851) - (xy 194.856516 57.120113) (xy 194.863057 57.107274) (xy 194.864937 57.092988) (xy 194.876259 57.081364) - (xy 194.884293 57.065597) (xy 194.90705 57.048602) (xy 194.9082 57.047977) (xy 195.04576 56.977887) - (xy 195.211369 56.857566) (xy 195.356116 56.712819) (xy 195.457628 56.573099) (xy 208.739418 56.573099) + (xy 154.02692 57.084816) (xy 154.06627 57.030656) (xy 154.162745 56.841315) (xy 154.228409 56.639221) + (xy 154.259607 56.442243) (xy 154.287384 56.387727) (xy 154.341901 56.359949) (xy 154.402333 56.36952) + (xy 154.445598 56.412785) (xy 154.454486 56.438415) (xy 154.489599 56.614936) (xy 154.565017 56.797013) + (xy 154.565018 56.797014) (xy 154.674511 56.960882) (xy 154.813868 57.100239) (xy 154.977736 57.209732) + (xy 155.159815 57.285151) (xy 155.353109 57.3236) (xy 155.35311 57.3236) (xy 155.55019 57.3236) + (xy 155.550191 57.3236) (xy 155.743485 57.285151) (xy 155.925564 57.209732) (xy 156.089432 57.100239) + (xy 156.228789 56.960882) (xy 156.338282 56.797014) (xy 156.413701 56.614935) (xy 156.45215 56.421641) + (xy 156.45215 56.224559) (xy 156.413701 56.031265) (xy 156.338282 55.849186) (xy 156.228789 55.685318) + (xy 156.089432 55.545961) (xy 155.925564 55.436468) (xy 155.895369 55.423961) (xy 155.794527 55.382191) + (xy 166.29125 55.382191) (xy 166.29125 55.500809) (xy 166.307481 55.561382) (xy 166.321952 55.61539) + (xy 166.381257 55.718108) (xy 166.381259 55.71811) (xy 166.381261 55.718113) (xy 166.465137 55.801989) + (xy 166.465139 55.80199) (xy 166.465141 55.801992) (xy 166.56786 55.861297) (xy 166.567861 55.861297) + (xy 166.567864 55.861299) (xy 166.682441 55.892) (xy 166.682443 55.892) (xy 166.801057 55.892) (xy 166.801059 55.892) + (xy 166.915636 55.861299) (xy 166.915638 55.861297) (xy 166.91564 55.861297) (xy 167.018358 55.801992) + (xy 167.018358 55.801991) (xy 167.018363 55.801989) (xy 167.102239 55.718113) (xy 167.102242 55.718108) + (xy 167.161547 55.61539) (xy 167.161547 55.615388) (xy 167.161549 55.615386) (xy 167.19225 55.500809) + (xy 167.19225 55.382191) (xy 167.171109 55.303291) (xy 169.86245 55.303291) (xy 169.86245 55.421909) + (xy 169.872196 55.45828) (xy 169.893152 55.53649) (xy 169.952457 55.639208) (xy 169.952459 55.63921) + (xy 169.952461 55.639213) (xy 170.036337 55.723089) (xy 170.036339 55.72309) (xy 170.036341 55.723092) + (xy 170.13906 55.782397) (xy 170.139061 55.782397) (xy 170.139064 55.782399) (xy 170.253641 55.8131) + (xy 170.253643 55.8131) (xy 170.372257 55.8131) (xy 170.372259 55.8131) (xy 170.486836 55.782399) + (xy 170.486838 55.782397) (xy 170.48684 55.782397) (xy 170.589558 55.723092) (xy 170.589558 55.723091) + (xy 170.589563 55.723089) (xy 170.673439 55.639213) (xy 170.698278 55.596191) (xy 170.732747 55.53649) + (xy 170.732747 55.536488) (xy 170.732749 55.536486) (xy 170.76345 55.421909) (xy 170.76345 55.303291) + (xy 170.732749 55.188714) (xy 170.732747 55.188711) (xy 170.732747 55.188709) (xy 170.673442 55.085991) + (xy 170.67344 55.085989) (xy 170.673439 55.085987) (xy 170.589563 55.002111) (xy 170.58956 55.002109) + (xy 170.589558 55.002107) (xy 170.486839 54.942802) (xy 170.486841 54.942802) (xy 170.485075 54.942329) + (xy 170.372259 54.9121) (xy 170.253641 54.9121) (xy 170.183517 54.930889) (xy 170.139059 54.942802) + (xy 170.036341 55.002107) (xy 169.952457 55.085991) (xy 169.893152 55.188709) (xy 169.893151 55.188714) + (xy 169.86245 55.303291) (xy 167.171109 55.303291) (xy 167.161549 55.267614) (xy 167.161547 55.267611) + (xy 167.161547 55.267609) (xy 167.102242 55.164891) (xy 167.10224 55.164889) (xy 167.102239 55.164887) + (xy 167.018363 55.081011) (xy 167.01836 55.081009) (xy 167.018358 55.081007) (xy 166.915639 55.021702) + (xy 166.91564 55.021702) (xy 166.902101 55.018074) (xy 166.801059 54.991) (xy 166.682441 54.991) + (xy 166.625192 55.00634) (xy 166.567859 55.021702) (xy 166.465141 55.081007) (xy 166.381257 55.164891) + (xy 166.321952 55.267609) (xy 166.3058 55.327891) (xy 166.29125 55.382191) (xy 155.794527 55.382191) + (xy 155.743485 55.361049) (xy 155.550193 55.3226) (xy 155.550191 55.3226) (xy 155.353109 55.3226) + (xy 155.353106 55.3226) (xy 155.159815 55.361049) (xy 155.159813 55.361049) (xy 154.977736 55.436467) + (xy 154.813868 55.545961) (xy 154.813864 55.545964) (xy 154.674514 55.685314) (xy 154.674511 55.685318) + (xy 154.565017 55.849186) (xy 154.489599 56.031263) (xy 154.454486 56.207784) (xy 154.424589 56.261167) + (xy 154.369023 56.286783) (xy 154.309014 56.274846) (xy 154.267481 56.229916) (xy 154.259607 56.203956) + (xy 154.228409 56.006978) (xy 154.162745 55.804884) (xy 154.066273 55.615546) (xy 154.066269 55.61554) + (xy 154.02692 55.561382) (xy 154.026919 55.561382) (xy 153.394612 56.193689) (xy 153.377575 56.130107) + (xy 153.311749 56.016093) (xy 153.218657 55.923001) (xy 153.104643 55.857175) (xy 153.041057 55.840137) + (xy 153.673366 55.207829) (xy 153.673366 55.207828) (xy 153.619209 55.16848) (xy 153.619203 55.168476) + (xy 153.429865 55.072004) (xy 153.227771 55.00634) (xy 153.0179 54.9731) (xy 152.8054 54.9731) (xy 152.595528 55.00634) + (xy 152.393434 55.072004) (xy 152.204096 55.168476) (xy 152.204092 55.168478) (xy 152.149932 55.207828) + (xy 152.782241 55.840137) (xy 152.718657 55.857175) (xy 152.604643 55.923001) (xy 152.511551 56.016093) + (xy 152.445725 56.130107) (xy 152.428687 56.193691) (xy 151.796378 55.561382) (xy 151.757028 55.615542) + (xy 151.757026 55.615546) (xy 151.660554 55.804884) (xy 151.59489 56.006978) (xy 151.563692 56.203956) + (xy 151.535914 56.258473) (xy 151.481398 56.28625) (xy 151.420966 56.276679) (xy 151.377701 56.233414) + (xy 151.368813 56.207783) (xy 151.354337 56.135009) (xy 151.333701 56.031265) (xy 151.258282 55.849186) + (xy 151.148789 55.685318) (xy 151.009432 55.545961) (xy 150.888407 55.465095) (xy 150.845563 55.436467) + (xy 150.663485 55.361049) (xy 150.560212 55.340506) (xy 150.470193 55.3226) (xy 150.470191 55.3226) + (xy 150.273109 55.3226) (xy 150.273106 55.3226) (xy 150.079815 55.361049) (xy 150.079813 55.361049) + (xy 149.897736 55.436467) (xy 149.733868 55.545961) (xy 149.733864 55.545964) (xy 149.594514 55.685314) + (xy 149.594511 55.685318) (xy 149.485017 55.849186) (xy 149.409599 56.031263) (xy 149.409599 56.031265) + (xy 149.37115 56.224556) (xy 148.832149 56.224556) (xy 148.793701 56.031265) (xy 148.718282 55.849186) + (xy 148.608789 55.685318) (xy 148.469432 55.545961) (xy 148.348407 55.465095) (xy 148.305563 55.436467) + (xy 148.123485 55.361049) (xy 147.930193 55.3226) (xy 147.930191 55.3226) (xy 147.733109 55.3226) + (xy 147.733106 55.3226) (xy 147.539815 55.361049) (xy 147.539813 55.361049) (xy 147.357736 55.436467) + (xy 147.193868 55.545961) (xy 147.193864 55.545964) (xy 147.054514 55.685314) (xy 147.054511 55.685318) + (xy 146.945017 55.849186) (xy 146.869599 56.031263) (xy 146.869599 56.031265) (xy 146.83115 56.224556) + (xy 146.292149 56.224556) (xy 146.253701 56.031265) (xy 146.178282 55.849186) (xy 146.068789 55.685318) + (xy 145.929432 55.545961) (xy 145.808407 55.465095) (xy 145.765563 55.436467) (xy 145.583485 55.361049) + (xy 145.390193 55.3226) (xy 145.390191 55.3226) (xy 145.193109 55.3226) (xy 145.193106 55.3226) + (xy 144.999815 55.361049) (xy 144.999813 55.361049) (xy 144.817736 55.436467) (xy 144.653868 55.545961) + (xy 144.653864 55.545964) (xy 144.514514 55.685314) (xy 144.514511 55.685318) (xy 144.405017 55.849186) + (xy 144.329599 56.031263) (xy 144.329599 56.031265) (xy 144.29115 56.224556) (xy 143.752149 56.224556) + (xy 143.713701 56.031265) (xy 143.638282 55.849186) (xy 143.528789 55.685318) (xy 143.389432 55.545961) + (xy 143.268407 55.465095) (xy 143.225563 55.436467) (xy 143.043485 55.361049) (xy 142.850193 55.3226) + (xy 142.850191 55.3226) (xy 142.653109 55.3226) (xy 142.653106 55.3226) (xy 142.459815 55.361049) + (xy 142.459813 55.361049) (xy 142.277736 55.436467) (xy 142.113868 55.545961) (xy 142.113864 55.545964) + (xy 141.974514 55.685314) (xy 141.974511 55.685318) (xy 141.865017 55.849186) (xy 141.789599 56.031263) + (xy 141.789599 56.031265) (xy 141.75115 56.224556) (xy 141.212149 56.224556) (xy 141.173701 56.031265) + (xy 141.098282 55.849186) (xy 140.988789 55.685318) (xy 140.849432 55.545961) (xy 140.728407 55.465095) + (xy 140.685563 55.436467) (xy 140.503485 55.361049) (xy 140.310193 55.3226) (xy 140.310191 55.3226) + (xy 140.113109 55.3226) (xy 140.113106 55.3226) (xy 139.919815 55.361049) (xy 139.919813 55.361049) + (xy 139.737736 55.436467) (xy 139.573868 55.545961) (xy 139.573864 55.545964) (xy 139.434514 55.685314) + (xy 139.434511 55.685318) (xy 139.325017 55.849186) (xy 139.249599 56.031263) (xy 139.249599 56.031265) + (xy 139.21115 56.224556) (xy 138.672149 56.224556) (xy 138.633701 56.031265) (xy 138.558282 55.849186) + (xy 138.448789 55.685318) (xy 138.309432 55.545961) (xy 138.188407 55.465095) (xy 138.145563 55.436467) + (xy 137.963485 55.361049) (xy 137.770193 55.3226) (xy 137.770191 55.3226) (xy 137.573109 55.3226) + (xy 137.573106 55.3226) (xy 137.379815 55.361049) (xy 137.379813 55.361049) (xy 137.197736 55.436467) + (xy 137.033868 55.545961) (xy 137.033864 55.545964) (xy 136.894514 55.685314) (xy 136.894511 55.685318) + (xy 136.785017 55.849186) (xy 136.709599 56.031263) (xy 136.709599 56.031265) (xy 136.67115 56.224556) + (xy 136.132149 56.224556) (xy 136.093701 56.031265) (xy 136.018282 55.849186) (xy 135.908789 55.685318) + (xy 135.769432 55.545961) (xy 135.648407 55.465095) (xy 135.605563 55.436467) (xy 135.423485 55.361049) + (xy 135.230193 55.3226) (xy 135.230191 55.3226) (xy 135.033109 55.3226) (xy 135.033106 55.3226) + (xy 134.839815 55.361049) (xy 134.839813 55.361049) (xy 134.657736 55.436467) (xy 134.493868 55.545961) + (xy 134.493864 55.545964) (xy 134.354514 55.685314) (xy 134.354511 55.685318) (xy 134.245017 55.849186) + (xy 134.169599 56.031263) (xy 134.169599 56.031265) (xy 134.13115 56.224556) (xy 133.592149 56.224556) + (xy 133.553701 56.031265) (xy 133.478282 55.849186) (xy 133.368789 55.685318) (xy 133.229432 55.545961) + (xy 133.108407 55.465095) (xy 133.065563 55.436467) (xy 132.883485 55.361049) (xy 132.690193 55.3226) + (xy 132.690191 55.3226) (xy 132.493109 55.3226) (xy 132.493106 55.3226) (xy 132.299815 55.361049) + (xy 132.299813 55.361049) (xy 132.117736 55.436467) (xy 131.953868 55.545961) (xy 131.953864 55.545964) + (xy 131.814514 55.685314) (xy 131.814511 55.685318) (xy 131.705017 55.849186) (xy 131.629599 56.031263) + (xy 131.629599 56.031265) (xy 131.59115 56.224556) (xy 131.052149 56.224556) (xy 131.013701 56.031265) + (xy 130.938282 55.849186) (xy 130.828789 55.685318) (xy 130.689432 55.545961) (xy 130.568407 55.465095) + (xy 130.525563 55.436467) (xy 130.343485 55.361049) (xy 130.150193 55.3226) (xy 130.150191 55.3226) + (xy 129.953109 55.3226) (xy 129.953106 55.3226) (xy 129.759815 55.361049) (xy 129.759813 55.361049) + (xy 129.577736 55.436467) (xy 129.413868 55.545961) (xy 129.413864 55.545964) (xy 129.274514 55.685314) + (xy 129.274511 55.685318) (xy 129.165017 55.849186) (xy 129.089599 56.031263) (xy 129.089599 56.031265) + (xy 129.05115 56.224556) (xy 128.512149 56.224556) (xy 128.473701 56.031265) (xy 128.398282 55.849186) + (xy 128.288789 55.685318) (xy 128.149432 55.545961) (xy 128.028407 55.465095) (xy 127.985563 55.436467) + (xy 127.803485 55.361049) (xy 127.610193 55.3226) (xy 127.610191 55.3226) (xy 127.413109 55.3226) + (xy 127.413106 55.3226) (xy 127.219815 55.361049) (xy 127.219813 55.361049) (xy 127.037736 55.436467) + (xy 126.873868 55.545961) (xy 126.873864 55.545964) (xy 126.734514 55.685314) (xy 126.734511 55.685318) + (xy 126.625017 55.849186) (xy 126.549599 56.031263) (xy 126.549599 56.031265) (xy 126.51115 56.224556) + (xy 125.972149 56.224556) (xy 125.933701 56.031265) (xy 125.858282 55.849186) (xy 125.748789 55.685318) + (xy 125.609432 55.545961) (xy 125.488407 55.465095) (xy 125.445563 55.436467) (xy 125.263485 55.361049) + (xy 125.070193 55.3226) (xy 125.070191 55.3226) (xy 124.873109 55.3226) (xy 124.873106 55.3226) + (xy 124.679815 55.361049) (xy 124.679813 55.361049) (xy 124.497736 55.436467) (xy 124.333868 55.545961) + (xy 124.333864 55.545964) (xy 124.194514 55.685314) (xy 124.194511 55.685318) (xy 124.085017 55.849186) + (xy 124.009599 56.031263) (xy 124.009599 56.031265) (xy 123.97115 56.224556) (xy 123.97115 56.421643) + (xy 124.009599 56.614934) (xy 124.009599 56.614936) (xy 124.085017 56.797014) (xy 124.085019 56.797016) + (xy 124.144453 56.885966) (xy 124.161062 56.944854) (xy 124.139884 57.002257) (xy 124.089011 57.03625) + (xy 124.087818 57.036578) (xy 124.04991 57.046735) (xy 124.019059 57.055002) (xy 123.916341 57.114307) + (xy 123.832457 57.198191) (xy 123.773152 57.300909) (xy 123.759721 57.351036) (xy 123.74245 57.415491) + (xy 80.778694 57.415491) (xy 80.776716 55.458272) (xy 106.19115 55.458272) (xy 106.19115 57.187927) + (xy 106.199882 57.23182) (xy 106.199884 57.231824) (xy 106.215437 57.2551) (xy 106.233146 57.281604) + (xy 106.282928 57.314867) (xy 106.293977 57.317064) (xy 106.326822 57.323599) (xy 106.326828 57.323599) + (xy 106.32683 57.3236) (xy 106.326831 57.3236) (xy 108.056469 57.3236) (xy 108.05647 57.3236) (xy 108.056471 57.323599) + (xy 108.056477 57.323599) (xy 108.078273 57.319262) (xy 108.100372 57.314867) (xy 108.150154 57.281604) + (xy 108.183417 57.231822) (xy 108.187812 57.209723) (xy 108.192149 57.187927) (xy 108.19215 57.187918) + (xy 108.19215 56.224556) (xy 108.73115 56.224556) (xy 108.73115 56.421643) (xy 108.769599 56.614934) + (xy 108.769599 56.614936) (xy 108.845017 56.797013) (xy 108.845018 56.797014) (xy 108.954511 56.960882) + (xy 109.093868 57.100239) (xy 109.257736 57.209732) (xy 109.439815 57.285151) (xy 109.633109 57.3236) + (xy 109.63311 57.3236) (xy 109.83019 57.3236) (xy 109.830191 57.3236) (xy 110.023485 57.285151) + (xy 110.205564 57.209732) (xy 110.369432 57.100239) (xy 110.508789 56.960882) (xy 110.618282 56.797014) + (xy 110.693701 56.614935) (xy 110.73215 56.421641) (xy 110.73215 56.224559) (xy 110.732149 56.224556) + (xy 111.27115 56.224556) (xy 111.27115 56.421643) (xy 111.309599 56.614934) (xy 111.309599 56.614936) + (xy 111.385017 56.797013) (xy 111.385018 56.797014) (xy 111.494511 56.960882) (xy 111.633868 57.100239) + (xy 111.797736 57.209732) (xy 111.979815 57.285151) (xy 112.173109 57.3236) (xy 112.17311 57.3236) + (xy 112.37019 57.3236) (xy 112.370191 57.3236) (xy 112.563485 57.285151) (xy 112.745564 57.209732) + (xy 112.909432 57.100239) (xy 113.048789 56.960882) (xy 113.158282 56.797014) (xy 113.233701 56.614935) + (xy 113.27215 56.421641) (xy 113.27215 56.224559) (xy 113.272149 56.224556) (xy 113.81115 56.224556) + (xy 113.81115 56.421643) (xy 113.849599 56.614934) (xy 113.849599 56.614936) (xy 113.925017 56.797013) + (xy 113.925018 56.797014) (xy 114.034511 56.960882) (xy 114.173868 57.100239) (xy 114.337736 57.209732) + (xy 114.519815 57.285151) (xy 114.713109 57.3236) (xy 114.71311 57.3236) (xy 114.91019 57.3236) + (xy 114.910191 57.3236) (xy 115.103485 57.285151) (xy 115.285564 57.209732) (xy 115.449432 57.100239) + (xy 115.588789 56.960882) (xy 115.698282 56.797014) (xy 115.773701 56.614935) (xy 115.81215 56.421641) + (xy 115.81215 56.224559) (xy 115.812149 56.224556) (xy 116.35115 56.224556) (xy 116.35115 56.421643) + (xy 116.389599 56.614934) (xy 116.389599 56.614936) (xy 116.465017 56.797013) (xy 116.465018 56.797014) + (xy 116.574511 56.960882) (xy 116.713868 57.100239) (xy 116.877736 57.209732) (xy 117.059815 57.285151) + (xy 117.253109 57.3236) (xy 117.25311 57.3236) (xy 117.45019 57.3236) (xy 117.450191 57.3236) (xy 117.643485 57.285151) + (xy 117.825564 57.209732) (xy 117.989432 57.100239) (xy 118.128789 56.960882) (xy 118.238282 56.797014) + (xy 118.313701 56.614935) (xy 118.35215 56.421641) (xy 118.35215 56.224559) (xy 118.352149 56.224556) + (xy 118.89115 56.224556) (xy 118.89115 56.421643) (xy 118.929599 56.614934) (xy 118.929599 56.614936) + (xy 119.005017 56.797013) (xy 119.005018 56.797014) (xy 119.114511 56.960882) (xy 119.253868 57.100239) + (xy 119.417736 57.209732) (xy 119.599815 57.285151) (xy 119.793109 57.3236) (xy 119.79311 57.3236) + (xy 119.99019 57.3236) (xy 119.990191 57.3236) (xy 120.183485 57.285151) (xy 120.365564 57.209732) + (xy 120.529432 57.100239) (xy 120.668789 56.960882) (xy 120.778282 56.797014) (xy 120.853701 56.614935) + (xy 120.89215 56.421641) (xy 120.89215 56.224559) (xy 120.892149 56.224556) (xy 121.43115 56.224556) + (xy 121.43115 56.421643) (xy 121.469599 56.614934) (xy 121.469599 56.614936) (xy 121.545017 56.797013) + (xy 121.545018 56.797014) (xy 121.654511 56.960882) (xy 121.793868 57.100239) (xy 121.957736 57.209732) + (xy 122.139815 57.285151) (xy 122.333109 57.3236) (xy 122.33311 57.3236) (xy 122.53019 57.3236) + (xy 122.530191 57.3236) (xy 122.723485 57.285151) (xy 122.905564 57.209732) (xy 123.069432 57.100239) + (xy 123.208789 56.960882) (xy 123.318282 56.797014) (xy 123.393701 56.614935) (xy 123.43215 56.421641) + (xy 123.43215 56.224559) (xy 123.393701 56.031265) (xy 123.318282 55.849186) (xy 123.208789 55.685318) + (xy 123.069432 55.545961) (xy 122.948407 55.465095) (xy 122.905563 55.436467) (xy 122.723485 55.361049) + (xy 122.530193 55.3226) (xy 122.530191 55.3226) (xy 122.333109 55.3226) (xy 122.333106 55.3226) + (xy 122.139815 55.361049) (xy 122.139813 55.361049) (xy 121.957736 55.436467) (xy 121.793868 55.545961) + (xy 121.793864 55.545964) (xy 121.654514 55.685314) (xy 121.654511 55.685318) (xy 121.545017 55.849186) + (xy 121.469599 56.031263) (xy 121.469599 56.031265) (xy 121.43115 56.224556) (xy 120.892149 56.224556) + (xy 120.853701 56.031265) (xy 120.778282 55.849186) (xy 120.668789 55.685318) (xy 120.529432 55.545961) + (xy 120.408407 55.465095) (xy 120.365563 55.436467) (xy 120.183485 55.361049) (xy 119.990193 55.3226) + (xy 119.990191 55.3226) (xy 119.793109 55.3226) (xy 119.793106 55.3226) (xy 119.599815 55.361049) + (xy 119.599813 55.361049) (xy 119.417736 55.436467) (xy 119.253868 55.545961) (xy 119.253864 55.545964) + (xy 119.114514 55.685314) (xy 119.114511 55.685318) (xy 119.005017 55.849186) (xy 118.929599 56.031263) + (xy 118.929599 56.031265) (xy 118.89115 56.224556) (xy 118.352149 56.224556) (xy 118.313701 56.031265) + (xy 118.238282 55.849186) (xy 118.128789 55.685318) (xy 117.989432 55.545961) (xy 117.868407 55.465095) + (xy 117.825563 55.436467) (xy 117.643485 55.361049) (xy 117.450193 55.3226) (xy 117.450191 55.3226) + (xy 117.253109 55.3226) (xy 117.253106 55.3226) (xy 117.059815 55.361049) (xy 117.059813 55.361049) + (xy 116.877736 55.436467) (xy 116.713868 55.545961) (xy 116.713864 55.545964) (xy 116.574514 55.685314) + (xy 116.574511 55.685318) (xy 116.465017 55.849186) (xy 116.389599 56.031263) (xy 116.389599 56.031265) + (xy 116.35115 56.224556) (xy 115.812149 56.224556) (xy 115.773701 56.031265) (xy 115.698282 55.849186) + (xy 115.588789 55.685318) (xy 115.449432 55.545961) (xy 115.328407 55.465095) (xy 115.285563 55.436467) + (xy 115.103485 55.361049) (xy 114.910193 55.3226) (xy 114.910191 55.3226) (xy 114.713109 55.3226) + (xy 114.713106 55.3226) (xy 114.519815 55.361049) (xy 114.519813 55.361049) (xy 114.337736 55.436467) + (xy 114.173868 55.545961) (xy 114.173864 55.545964) (xy 114.034514 55.685314) (xy 114.034511 55.685318) + (xy 113.925017 55.849186) (xy 113.849599 56.031263) (xy 113.849599 56.031265) (xy 113.81115 56.224556) + (xy 113.272149 56.224556) (xy 113.233701 56.031265) (xy 113.158282 55.849186) (xy 113.048789 55.685318) + (xy 112.909432 55.545961) (xy 112.788407 55.465095) (xy 112.745563 55.436467) (xy 112.563485 55.361049) + (xy 112.370193 55.3226) (xy 112.370191 55.3226) (xy 112.173109 55.3226) (xy 112.173106 55.3226) + (xy 111.979815 55.361049) (xy 111.979813 55.361049) (xy 111.797736 55.436467) (xy 111.633868 55.545961) + (xy 111.633864 55.545964) (xy 111.494514 55.685314) (xy 111.494511 55.685318) (xy 111.385017 55.849186) + (xy 111.309599 56.031263) (xy 111.309599 56.031265) (xy 111.27115 56.224556) (xy 110.732149 56.224556) + (xy 110.693701 56.031265) (xy 110.618282 55.849186) (xy 110.508789 55.685318) (xy 110.369432 55.545961) + (xy 110.248407 55.465095) (xy 110.205563 55.436467) (xy 110.023485 55.361049) (xy 109.830193 55.3226) + (xy 109.830191 55.3226) (xy 109.633109 55.3226) (xy 109.633106 55.3226) (xy 109.439815 55.361049) + (xy 109.439813 55.361049) (xy 109.257736 55.436467) (xy 109.093868 55.545961) (xy 109.093864 55.545964) + (xy 108.954514 55.685314) (xy 108.954511 55.685318) (xy 108.845017 55.849186) (xy 108.769599 56.031263) + (xy 108.769599 56.031265) (xy 108.73115 56.224556) (xy 108.19215 56.224556) (xy 108.19215 55.458281) + (xy 108.192149 55.458272) (xy 108.183417 55.414379) (xy 108.183415 55.414375) (xy 108.161911 55.382192) + (xy 108.150154 55.364596) (xy 108.14949 55.364152) (xy 108.100374 55.331334) (xy 108.10037 55.331332) + (xy 108.056477 55.3226) (xy 108.05647 55.3226) (xy 106.32683 55.3226) (xy 106.326822 55.3226) (xy 106.282929 55.331332) + (xy 106.282925 55.331334) (xy 106.233148 55.364594) (xy 106.233144 55.364598) (xy 106.199884 55.414375) + (xy 106.199882 55.414379) (xy 106.19115 55.458272) (xy 80.776716 55.458272) (xy 80.776102 54.850772) + (xy 188.13365 54.850772) (xy 188.13365 56.880427) (xy 188.142382 56.92432) (xy 188.142384 56.924324) + (xy 188.166811 56.960882) (xy 188.175646 56.974104) (xy 188.225428 57.007367) (xy 188.236477 57.009564) + (xy 188.269322 57.016099) (xy 188.269328 57.016099) (xy 188.26933 57.0161) (xy 188.269331 57.0161) + (xy 190.298969 57.0161) (xy 190.29897 57.0161) (xy 190.298971 57.016099) (xy 190.298977 57.016099) + (xy 190.320773 57.011762) (xy 190.342872 57.007367) (xy 190.392654 56.974104) (xy 190.425917 56.924322) + (xy 190.43465 56.88042) (xy 190.43465 55.77505) (xy 193.21365 55.77505) (xy 193.21365 55.956149) + (xy 193.241978 56.135006) (xy 193.297938 56.307237) (xy 193.367115 56.443005) (xy 193.380154 56.468594) + (xy 193.486597 56.615101) (xy 193.614649 56.743153) (xy 193.761156 56.849596) (xy 193.922511 56.931811) + (xy 194.094741 56.987771) (xy 194.166286 56.999102) (xy 194.273601 57.0161) (xy 194.273604 57.0161) + (xy 194.454699 57.0161) (xy 194.544127 57.001935) (xy 194.633559 56.987771) (xy 194.729706 56.956531) + (xy 194.751797 56.949354) (xy 194.765646 56.944854) (xy 194.805789 56.931811) (xy 194.967144 56.849596) + (xy 195.113651 56.743153) (xy 195.241703 56.615101) (xy 195.272219 56.573099) (xy 208.739418 56.573099) (xy 208.739419 56.5731) (xy 209.787504 56.5731) (xy 209.74902 56.639757) (xy 209.71665 56.760565) (xy 209.71665 56.885635) (xy 209.74902 57.006443) (xy 209.787504 57.0731) (xy 208.739419 57.0731) (xy 208.749891 57.139222) (xy 208.815554 57.341315) (xy 208.912025 57.530652) (xy 209.036927 57.702564) - (xy 209.187185 57.852822) (xy 209.359097 57.977724) (xy 209.548436 58.074196) (xy 209.586822 58.086668) - (xy 209.636322 58.122631) (xy 209.65523 58.180822) (xy 209.636323 58.239013) (xy 209.601176 58.269032) - (xy 209.463661 58.3391) (xy 209.463659 58.339101) (xy 209.375751 58.402969) (xy 209.317149 58.445547) - (xy 209.189097 58.573599) (xy 209.135875 58.646852) (xy 209.082652 58.720108) (xy 209.000438 58.881462) - (xy 208.944478 59.053693) (xy 208.91615 59.23255) (xy 208.91615 59.413649) (xy 208.944478 59.592506) - (xy 209.000438 59.764737) (xy 209.076483 59.913984) (xy 209.082654 59.926094) (xy 209.189097 60.072601) - (xy 209.317149 60.200653) (xy 209.463656 60.307096) (xy 209.625011 60.389311) (xy 209.797241 60.445271) - (xy 209.868786 60.456602) (xy 209.976101 60.4736) (xy 209.976104 60.4736) (xy 210.407199 60.4736) - (xy 210.496627 60.459435) (xy 210.586059 60.445271) (xy 210.758289 60.389311) (xy 210.919644 60.307096) - (xy 211.066151 60.200653) (xy 211.194203 60.072601) (xy 211.300646 59.926094) (xy 211.382861 59.764739) - (xy 211.438821 59.592509) (xy 211.452985 59.503077) (xy 211.46715 59.413649) (xy 211.46715 59.23255) - (xy 211.438821 59.053693) (xy 211.438821 59.053691) (xy 211.382861 58.881461) (xy 211.300646 58.720106) - (xy 211.194203 58.573599) (xy 211.066151 58.445547) (xy 210.919644 58.339104) (xy 210.91964 58.339101) - (xy 210.919638 58.3391) (xy 210.782123 58.269032) (xy 210.738859 58.225768) (xy 210.729288 58.165335) - (xy 210.757066 58.110819) (xy 210.796478 58.086668) (xy 210.834862 58.074197) (xy 211.024202 57.977724) - (xy 211.196114 57.852822) (xy 211.346372 57.702564) (xy 211.471274 57.530652) (xy 211.567745 57.341315) - (xy 211.633408 57.139222) (xy 211.643881 57.0731) (xy 210.595796 57.0731) (xy 210.63428 57.006443) - (xy 210.66665 56.885635) (xy 210.66665 56.760565) (xy 210.63428 56.639757) (xy 210.595796 56.5731) - (xy 211.643881 56.5731) (xy 211.643881 56.573099) (xy 211.633408 56.506977) (xy 211.567745 56.304884) - (xy 211.471274 56.115547) (xy 211.346372 55.943635) (xy 211.196114 55.793377) (xy 211.024202 55.668475) - (xy 210.834859 55.572001) (xy 210.796476 55.55953) (xy 210.746976 55.523566) (xy 210.728069 55.465376) - (xy 210.746977 55.407185) (xy 210.782122 55.377166) (xy 210.919644 55.307096) (xy 211.066151 55.200653) - (xy 211.194203 55.072601) (xy 211.300646 54.926094) (xy 211.382861 54.764739) (xy 211.438821 54.592509) - (xy 211.46715 54.413646) (xy 211.46715 54.232554) (xy 211.46715 54.23255) (xy 211.438821 54.053693) - (xy 211.438821 54.053691) (xy 211.382861 53.881461) (xy 211.300646 53.720106) (xy 211.194203 53.573599) - (xy 211.066151 53.445547) (xy 210.919644 53.339104) (xy 210.919643 53.339103) (xy 210.919641 53.339102) - (xy 210.758287 53.256888) (xy 210.586056 53.200928) (xy 210.407199 53.1726) (xy 210.407196 53.1726) - (xy 209.976104 53.1726) (xy 209.976101 53.1726) (xy 209.797243 53.200928) (xy 209.625012 53.256888) - (xy 209.463658 53.339102) (xy 209.390402 53.392325) (xy 209.317149 53.445547) (xy 209.189097 53.573599) - (xy 209.135875 53.646852) (xy 209.082652 53.720108) (xy 209.000438 53.881462) (xy 208.944478 54.053693) - (xy 208.91615 54.23255) (xy 208.91615 54.413649) (xy 208.944478 54.592506) (xy 209.000438 54.764737) - (xy 209.060227 54.88208) (xy 209.082654 54.926094) (xy 209.189097 55.072601) (xy 209.317149 55.200653) - (xy 209.463656 55.307096) (xy 209.463658 55.307097) (xy 209.601175 55.377166) (xy 209.64444 55.420431) - (xy 209.654011 55.480863) (xy 209.626233 55.53538) (xy 209.586824 55.55953) (xy 209.548438 55.572002) - (xy 209.359097 55.668475) (xy 209.187185 55.793377) (xy 209.036927 55.943635) (xy 208.912025 56.115547) - (xy 208.815554 56.304884) (xy 208.749891 56.506977) (xy 208.739418 56.573099) (xy 195.457628 56.573099) - (xy 195.476437 56.54721) (xy 195.56937 56.364819) (xy 195.632627 56.170134) (xy 195.652922 56.042) - (xy 195.66465 55.967955) (xy 195.66465 55.763244) (xy 195.632628 55.56107) (xy 195.624281 55.53538) - (xy 195.56937 55.366381) (xy 195.476437 55.18399) (xy 195.476435 55.183986) (xy 195.35612 55.018386) - (xy 195.356118 55.018384) (xy 195.356116 55.018381) (xy 195.211369 54.873634) (xy 195.211365 54.873631) - (xy 195.211363 54.873629) (xy 195.045763 54.753314) (xy 195.045759 54.753312) (xy 194.863369 54.66038) - (xy 194.668679 54.597121) (xy 194.466505 54.5651) (xy 194.466502 54.5651) (xy 194.261798 54.5651) - (xy 194.261795 54.5651) (xy 194.05962 54.597121) (xy 193.86493 54.66038) (xy 193.68254 54.753312) - (xy 193.682536 54.753314) (xy 193.516936 54.873629) (xy 193.372179 55.018386) (xy 193.251864 55.183986) - (xy 193.251862 55.18399) (xy 193.15893 55.36638) (xy 193.095671 55.56107) (xy 193.06365 55.763244) - (xy 190.584649 55.763244) (xy 190.584649 54.820736) (xy 190.581735 54.795609) (xy 190.536356 54.692835) - (xy 190.456915 54.613394) (xy 190.354141 54.568015) (xy 190.35414 54.568014) (xy 190.354138 54.568014) - (xy 190.329018 54.5651) (xy 188.239289 54.5651) (xy 188.239286 54.565101) (xy 188.214159 54.568014) - (xy 188.111385 54.613394) (xy 188.031944 54.692835) (xy 187.986564 54.795611) (xy 187.98365 54.82073) - (xy 170.575404 54.82073) (xy 170.544734 54.803023) (xy 170.392007 54.7621) (xy 170.233893 54.7621) - (xy 170.081166 54.803023) (xy 169.944234 54.88208) (xy 169.83243 54.993884) (xy 169.753373 55.130816) - (xy 169.71245 55.283543) (xy 167.321109 55.283543) (xy 167.301327 55.209716) (xy 167.22227 55.072784) - (xy 167.110466 54.96098) (xy 166.973534 54.881923) (xy 166.820807 54.841) (xy 166.662693 54.841) - (xy 166.509966 54.881923) (xy 166.373034 54.96098) (xy 166.26123 55.072784) (xy 166.182173 55.209716) - (xy 166.14125 55.362443) (xy 156.086768 55.362443) (xy 156.054644 55.339104) (xy 156.054643 55.339103) - (xy 156.054641 55.339102) (xy 155.893287 55.256888) (xy 155.721056 55.200928) (xy 155.542199 55.1726) - (xy 155.542196 55.1726) (xy 155.361104 55.1726) (xy 155.361101 55.1726) (xy 155.182243 55.200928) - (xy 155.010012 55.256888) (xy 154.848658 55.339102) (xy 154.811112 55.366381) (xy 154.702149 55.445547) - (xy 154.574097 55.573599) (xy 154.558997 55.594383) (xy 154.467652 55.720108) (xy 154.385437 55.881464) - (xy 154.385436 55.881466) (xy 154.380685 55.896088) (xy 154.344719 55.945586) (xy 154.286528 55.964491) - (xy 154.228338 55.945581) (xy 154.192377 55.896083) (xy 154.162746 55.804886) (xy 154.066273 55.615546) - (xy 154.066269 55.61554) (xy 154.02692 55.561382) (xy 154.026919 55.561382) (xy 153.394612 56.193689) - (xy 153.377575 56.130107) (xy 153.311749 56.016093) (xy 153.218657 55.923001) (xy 153.104643 55.857175) - (xy 153.041057 55.840137) (xy 153.673366 55.207829) (xy 153.673366 55.207828) (xy 153.619209 55.16848) - (xy 153.619203 55.168476) (xy 153.429865 55.072004) (xy 153.227771 55.00634) (xy 153.0179 54.9731) - (xy 152.8054 54.9731) (xy 152.595528 55.00634) (xy 152.393434 55.072004) (xy 152.204096 55.168476) - (xy 152.204092 55.168478) (xy 152.149932 55.207828) (xy 152.782241 55.840137) (xy 152.718657 55.857175) - (xy 152.604643 55.923001) (xy 152.511551 56.016093) (xy 152.445725 56.130107) (xy 152.428687 56.193691) - (xy 151.796378 55.561382) (xy 151.757028 55.615542) (xy 151.757026 55.615546) (xy 151.660554 55.804884) - (xy 151.630922 55.896084) (xy 151.594958 55.945584) (xy 151.536767 55.964491) (xy 151.478576 55.945584) - (xy 151.442612 55.896084) (xy 151.442612 55.896083) (xy 151.441474 55.892583) (xy 151.437861 55.881461) - (xy 151.355646 55.720106) (xy 151.249203 55.573599) (xy 151.121151 55.445547) (xy 150.974644 55.339104) - (xy 150.97464 55.339101) (xy 150.974638 55.3391) (xy 150.964177 55.33377) (xy 150.964176 55.33377) - (xy 150.813287 55.256888) (xy 150.641056 55.200928) (xy 150.462199 55.1726) (xy 150.462196 55.1726) - (xy 150.281104 55.1726) (xy 150.281101 55.1726) (xy 150.102243 55.200928) (xy 149.930012 55.256888) - (xy 149.768658 55.339102) (xy 149.731112 55.366381) (xy 149.622149 55.445547) (xy 149.494097 55.573599) - (xy 149.478997 55.594383) (xy 149.387652 55.720108) (xy 149.305438 55.881462) (xy 149.249478 56.053693) - (xy 149.22115 56.23255) (xy 148.98215 56.23255) (xy 148.953821 56.053693) (xy 148.953821 56.053691) - (xy 148.897861 55.881461) (xy 148.815646 55.720106) (xy 148.709203 55.573599) (xy 148.581151 55.445547) - (xy 148.434644 55.339104) (xy 148.434643 55.339103) (xy 148.434641 55.339102) (xy 148.273287 55.256888) - (xy 148.101056 55.200928) (xy 147.922199 55.1726) (xy 147.922196 55.1726) (xy 147.741104 55.1726) - (xy 147.741101 55.1726) (xy 147.562243 55.200928) (xy 147.390012 55.256888) (xy 147.228658 55.339102) - (xy 147.191112 55.366381) (xy 147.082149 55.445547) (xy 146.954097 55.573599) (xy 146.938997 55.594383) - (xy 146.847652 55.720108) (xy 146.765438 55.881462) (xy 146.709478 56.053693) (xy 146.68115 56.23255) - (xy 146.44215 56.23255) (xy 146.413821 56.053693) (xy 146.413821 56.053691) (xy 146.357861 55.881461) - (xy 146.275646 55.720106) (xy 146.169203 55.573599) (xy 146.041151 55.445547) (xy 145.894644 55.339104) - (xy 145.894643 55.339103) (xy 145.894641 55.339102) (xy 145.733287 55.256888) (xy 145.561056 55.200928) - (xy 145.382199 55.1726) (xy 145.382196 55.1726) (xy 145.201104 55.1726) (xy 145.201101 55.1726) - (xy 145.022243 55.200928) (xy 144.850012 55.256888) (xy 144.688658 55.339102) (xy 144.651112 55.366381) - (xy 144.542149 55.445547) (xy 144.414097 55.573599) (xy 144.398997 55.594383) (xy 144.307652 55.720108) - (xy 144.225438 55.881462) (xy 144.169478 56.053693) (xy 144.14115 56.23255) (xy 143.90215 56.23255) - (xy 143.873821 56.053693) (xy 143.873821 56.053691) (xy 143.817861 55.881461) (xy 143.735646 55.720106) - (xy 143.629203 55.573599) (xy 143.501151 55.445547) (xy 143.354644 55.339104) (xy 143.354643 55.339103) - (xy 143.354641 55.339102) (xy 143.193287 55.256888) (xy 143.021056 55.200928) (xy 142.842199 55.1726) - (xy 142.842196 55.1726) (xy 142.661104 55.1726) (xy 142.661101 55.1726) (xy 142.482243 55.200928) - (xy 142.310012 55.256888) (xy 142.148658 55.339102) (xy 142.111112 55.366381) (xy 142.002149 55.445547) - (xy 141.874097 55.573599) (xy 141.858997 55.594383) (xy 141.767652 55.720108) (xy 141.685438 55.881462) - (xy 141.629478 56.053693) (xy 141.60115 56.23255) (xy 141.36215 56.23255) (xy 141.333821 56.053693) - (xy 141.333821 56.053691) (xy 141.277861 55.881461) (xy 141.195646 55.720106) (xy 141.089203 55.573599) - (xy 140.961151 55.445547) (xy 140.814644 55.339104) (xy 140.814643 55.339103) (xy 140.814641 55.339102) - (xy 140.653287 55.256888) (xy 140.481056 55.200928) (xy 140.302199 55.1726) (xy 140.302196 55.1726) - (xy 140.121104 55.1726) (xy 140.121101 55.1726) (xy 139.942243 55.200928) (xy 139.770012 55.256888) - (xy 139.608658 55.339102) (xy 139.571112 55.366381) (xy 139.462149 55.445547) (xy 139.334097 55.573599) - (xy 139.318997 55.594383) (xy 139.227652 55.720108) (xy 139.145438 55.881462) (xy 139.089478 56.053693) - (xy 139.06115 56.23255) (xy 138.82215 56.23255) (xy 138.793821 56.053693) (xy 138.793821 56.053691) - (xy 138.737861 55.881461) (xy 138.655646 55.720106) (xy 138.549203 55.573599) (xy 138.421151 55.445547) - (xy 138.274644 55.339104) (xy 138.274643 55.339103) (xy 138.274641 55.339102) (xy 138.113287 55.256888) - (xy 137.941056 55.200928) (xy 137.762199 55.1726) (xy 137.762196 55.1726) (xy 137.581104 55.1726) - (xy 137.581101 55.1726) (xy 137.402243 55.200928) (xy 137.230012 55.256888) (xy 137.068658 55.339102) - (xy 137.031112 55.366381) (xy 136.922149 55.445547) (xy 136.794097 55.573599) (xy 136.778997 55.594383) - (xy 136.687652 55.720108) (xy 136.605438 55.881462) (xy 136.549478 56.053693) (xy 136.52115 56.23255) - (xy 136.28215 56.23255) (xy 136.253821 56.053693) (xy 136.253821 56.053691) (xy 136.197861 55.881461) - (xy 136.115646 55.720106) (xy 136.009203 55.573599) (xy 135.881151 55.445547) (xy 135.734644 55.339104) - (xy 135.734643 55.339103) (xy 135.734641 55.339102) (xy 135.573287 55.256888) (xy 135.401056 55.200928) - (xy 135.222199 55.1726) (xy 135.222196 55.1726) (xy 135.041104 55.1726) (xy 135.041101 55.1726) - (xy 134.862243 55.200928) (xy 134.690012 55.256888) (xy 134.528658 55.339102) (xy 134.491112 55.366381) - (xy 134.382149 55.445547) (xy 134.254097 55.573599) (xy 134.238997 55.594383) (xy 134.147652 55.720108) - (xy 134.065438 55.881462) (xy 134.009478 56.053693) (xy 133.98115 56.23255) (xy 133.74215 56.23255) - (xy 133.713821 56.053693) (xy 133.713821 56.053691) (xy 133.657861 55.881461) (xy 133.575646 55.720106) - (xy 133.469203 55.573599) (xy 133.341151 55.445547) (xy 133.194644 55.339104) (xy 133.194643 55.339103) - (xy 133.194641 55.339102) (xy 133.033287 55.256888) (xy 132.861056 55.200928) (xy 132.682199 55.1726) - (xy 132.682196 55.1726) (xy 132.501104 55.1726) (xy 132.501101 55.1726) (xy 132.322243 55.200928) - (xy 132.150012 55.256888) (xy 131.988658 55.339102) (xy 131.951112 55.366381) (xy 131.842149 55.445547) - (xy 131.714097 55.573599) (xy 131.698997 55.594383) (xy 131.607652 55.720108) (xy 131.525438 55.881462) - (xy 131.469478 56.053693) (xy 131.44115 56.23255) (xy 131.20215 56.23255) (xy 131.173821 56.053693) - (xy 131.173821 56.053691) (xy 131.117861 55.881461) (xy 131.035646 55.720106) (xy 130.929203 55.573599) - (xy 130.801151 55.445547) (xy 130.654644 55.339104) (xy 130.654643 55.339103) (xy 130.654641 55.339102) - (xy 130.493287 55.256888) (xy 130.321056 55.200928) (xy 130.142199 55.1726) (xy 130.142196 55.1726) - (xy 129.961104 55.1726) (xy 129.961101 55.1726) (xy 129.782243 55.200928) (xy 129.610012 55.256888) - (xy 129.448658 55.339102) (xy 129.411112 55.366381) (xy 129.302149 55.445547) (xy 129.174097 55.573599) - (xy 129.158997 55.594383) (xy 129.067652 55.720108) (xy 128.985438 55.881462) (xy 128.929478 56.053693) - (xy 128.90115 56.23255) (xy 128.66215 56.23255) (xy 128.633821 56.053693) (xy 128.633821 56.053691) - (xy 128.577861 55.881461) (xy 128.495646 55.720106) (xy 128.389203 55.573599) (xy 128.261151 55.445547) - (xy 128.114644 55.339104) (xy 128.114643 55.339103) (xy 128.114641 55.339102) (xy 127.953287 55.256888) - (xy 127.781056 55.200928) (xy 127.602199 55.1726) (xy 127.602196 55.1726) (xy 127.421104 55.1726) - (xy 127.421101 55.1726) (xy 127.242243 55.200928) (xy 127.070012 55.256888) (xy 126.908658 55.339102) - (xy 126.871112 55.366381) (xy 126.762149 55.445547) (xy 126.634097 55.573599) (xy 126.618997 55.594383) - (xy 126.527652 55.720108) (xy 126.445438 55.881462) (xy 126.389478 56.053693) (xy 126.36115 56.23255) - (xy 126.12215 56.23255) (xy 126.093821 56.053693) (xy 126.093821 56.053691) (xy 126.037861 55.881461) - (xy 125.955646 55.720106) (xy 125.849203 55.573599) (xy 125.721151 55.445547) (xy 125.574644 55.339104) - (xy 125.574643 55.339103) (xy 125.574641 55.339102) (xy 125.413287 55.256888) (xy 125.241056 55.200928) - (xy 125.062199 55.1726) (xy 125.062196 55.1726) (xy 124.881104 55.1726) (xy 124.881101 55.1726) - (xy 124.702243 55.200928) (xy 124.530012 55.256888) (xy 124.368658 55.339102) (xy 124.331112 55.366381) - (xy 124.222149 55.445547) (xy 124.094097 55.573599) (xy 124.078997 55.594383) (xy 123.987652 55.720108) - (xy 123.905438 55.881462) (xy 123.849478 56.053693) (xy 123.82115 56.23255) (xy 123.82115 56.413649) - (xy 123.849478 56.592506) (xy 123.905438 56.764737) (xy 123.934701 56.822169) (xy 123.944272 56.882601) - (xy 123.916495 56.937118) (xy 123.895992 56.95285) (xy 123.824235 56.994279) (xy 123.824234 56.99428) - (xy 123.71243 57.106084) (xy 123.633373 57.243016) (xy 123.59245 57.395743) (xy 122.853493 57.395743) - (xy 122.873289 57.389311) (xy 123.034644 57.307096) (xy 123.181151 57.200653) (xy 123.309203 57.072601) - (xy 123.415646 56.926094) (xy 123.497861 56.764739) (xy 123.553821 56.592509) (xy 123.58215 56.413646) - (xy 123.58215 56.232554) (xy 123.58215 56.23255) (xy 123.553821 56.053693) (xy 123.553821 56.053691) - (xy 123.497861 55.881461) (xy 123.415646 55.720106) (xy 123.309203 55.573599) (xy 123.181151 55.445547) - (xy 123.034644 55.339104) (xy 123.034643 55.339103) (xy 123.034641 55.339102) (xy 122.873287 55.256888) - (xy 122.701056 55.200928) (xy 122.522199 55.1726) (xy 122.522196 55.1726) (xy 122.341104 55.1726) - (xy 122.341101 55.1726) (xy 122.162243 55.200928) (xy 121.990012 55.256888) (xy 121.828658 55.339102) - (xy 121.791112 55.366381) (xy 121.682149 55.445547) (xy 121.554097 55.573599) (xy 121.538997 55.594383) - (xy 121.447652 55.720108) (xy 121.365438 55.881462) (xy 121.309478 56.053693) (xy 121.28115 56.23255) - (xy 121.04215 56.23255) (xy 121.013821 56.053693) (xy 121.013821 56.053691) (xy 120.957861 55.881461) - (xy 120.875646 55.720106) (xy 120.769203 55.573599) (xy 120.641151 55.445547) (xy 120.494644 55.339104) - (xy 120.494643 55.339103) (xy 120.494641 55.339102) (xy 120.333287 55.256888) (xy 120.161056 55.200928) - (xy 119.982199 55.1726) (xy 119.982196 55.1726) (xy 119.801104 55.1726) (xy 119.801101 55.1726) - (xy 119.622243 55.200928) (xy 119.450012 55.256888) (xy 119.288658 55.339102) (xy 119.251112 55.366381) - (xy 119.142149 55.445547) (xy 119.014097 55.573599) (xy 118.998997 55.594383) (xy 118.907652 55.720108) - (xy 118.825438 55.881462) (xy 118.769478 56.053693) (xy 118.74115 56.23255) (xy 118.50215 56.23255) - (xy 118.473821 56.053693) (xy 118.473821 56.053691) (xy 118.417861 55.881461) (xy 118.335646 55.720106) - (xy 118.229203 55.573599) (xy 118.101151 55.445547) (xy 117.954644 55.339104) (xy 117.954643 55.339103) - (xy 117.954641 55.339102) (xy 117.793287 55.256888) (xy 117.621056 55.200928) (xy 117.442199 55.1726) - (xy 117.442196 55.1726) (xy 117.261104 55.1726) (xy 117.261101 55.1726) (xy 117.082243 55.200928) - (xy 116.910012 55.256888) (xy 116.748658 55.339102) (xy 116.711112 55.366381) (xy 116.602149 55.445547) - (xy 116.474097 55.573599) (xy 116.458997 55.594383) (xy 116.367652 55.720108) (xy 116.285438 55.881462) - (xy 116.229478 56.053693) (xy 116.20115 56.23255) (xy 115.96215 56.23255) (xy 115.933821 56.053693) - (xy 115.933821 56.053691) (xy 115.877861 55.881461) (xy 115.795646 55.720106) (xy 115.689203 55.573599) - (xy 115.561151 55.445547) (xy 115.414644 55.339104) (xy 115.414643 55.339103) (xy 115.414641 55.339102) - (xy 115.253287 55.256888) (xy 115.081056 55.200928) (xy 114.902199 55.1726) (xy 114.902196 55.1726) - (xy 114.721104 55.1726) (xy 114.721101 55.1726) (xy 114.542243 55.200928) (xy 114.370012 55.256888) - (xy 114.208658 55.339102) (xy 114.171112 55.366381) (xy 114.062149 55.445547) (xy 113.934097 55.573599) - (xy 113.918997 55.594383) (xy 113.827652 55.720108) (xy 113.745438 55.881462) (xy 113.689478 56.053693) - (xy 113.66115 56.23255) (xy 113.42215 56.23255) (xy 113.393821 56.053693) (xy 113.393821 56.053691) - (xy 113.337861 55.881461) (xy 113.255646 55.720106) (xy 113.149203 55.573599) (xy 113.021151 55.445547) - (xy 112.874644 55.339104) (xy 112.874643 55.339103) (xy 112.874641 55.339102) (xy 112.713287 55.256888) - (xy 112.541056 55.200928) (xy 112.362199 55.1726) (xy 112.362196 55.1726) (xy 112.181104 55.1726) - (xy 112.181101 55.1726) (xy 112.002243 55.200928) (xy 111.830012 55.256888) (xy 111.668658 55.339102) - (xy 111.631112 55.366381) (xy 111.522149 55.445547) (xy 111.394097 55.573599) (xy 111.378997 55.594383) - (xy 111.287652 55.720108) (xy 111.205438 55.881462) (xy 111.149478 56.053693) (xy 111.12115 56.23255) - (xy 110.88215 56.23255) (xy 110.853821 56.053693) (xy 110.853821 56.053691) (xy 110.797861 55.881461) - (xy 110.715646 55.720106) (xy 110.609203 55.573599) (xy 110.481151 55.445547) (xy 110.334644 55.339104) - (xy 110.334643 55.339103) (xy 110.334641 55.339102) (xy 110.173287 55.256888) (xy 110.001056 55.200928) - (xy 109.822199 55.1726) (xy 109.822196 55.1726) (xy 109.641104 55.1726) (xy 109.641101 55.1726) - (xy 109.462243 55.200928) (xy 109.290012 55.256888) (xy 109.128658 55.339102) (xy 109.091112 55.366381) - (xy 108.982149 55.445547) (xy 108.854097 55.573599) (xy 108.838997 55.594383) (xy 108.747652 55.720108) - (xy 108.665438 55.881462) (xy 108.609478 56.053693) (xy 108.58115 56.23255) (xy 108.342149 56.23255) - (xy 108.342149 55.428236) (xy 108.339235 55.403109) (xy 108.293856 55.300335) (xy 108.214415 55.220894) - (xy 108.111641 55.175515) (xy 108.11164 55.175514) (xy 108.111638 55.175514) (xy 108.086518 55.1726) - (xy 106.296789 55.1726) (xy 106.296786 55.172601) (xy 106.271659 55.175514) (xy 106.168885 55.220894) - (xy 106.089444 55.300335) (xy 106.044064 55.403111) (xy 106.04115 55.42823) (xy 80.776686 55.42823) - (xy 80.774502 53.267243) (xy 172.80615 53.267243) (xy 172.80615 53.425357) (xy 172.847073 53.578084) - (xy 172.92613 53.715016) (xy 173.037934 53.82682) (xy 173.174866 53.905877) (xy 173.327593 53.9468) - (xy 173.327595 53.9468) (xy 173.485705 53.9468) (xy 173.485707 53.9468) (xy 173.638434 53.905877) - (xy 173.775366 53.82682) (xy 173.88717 53.715016) (xy 173.966227 53.578084) (xy 174.00715 53.425357) - (xy 174.00715 53.267243) (xy 173.966227 53.114516) (xy 173.88717 52.977584) (xy 173.775366 52.86578) - (xy 173.638434 52.786723) (xy 173.485707 52.7458) (xy 173.327593 52.7458) (xy 173.174866 52.786723) - (xy 173.037934 52.86578) (xy 172.92613 52.977584) (xy 172.847073 53.114516) (xy 172.80615 53.267243) - (xy 80.774502 53.267243) (xy 80.77251 51.296849) (xy 109.84165 51.296849) (xy 109.84165 51.50935) - (xy 109.87489 51.719221) (xy 109.940554 51.921315) (xy 110.037026 52.110653) (xy 110.03703 52.110659) - (xy 110.076378 52.164816) (xy 110.076379 52.164816) (xy 110.708687 51.532507) (xy 110.725725 51.596093) - (xy 110.791551 51.710107) (xy 110.884643 51.803199) (xy 110.998657 51.869025) (xy 111.062239 51.886062) - (xy 110.429932 52.518369) (xy 110.429932 52.51837) (xy 110.48409 52.557719) (xy 110.484096 52.557723) - (xy 110.673434 52.654195) (xy 110.875528 52.719859) (xy 111.0854 52.7531) (xy 111.2979 52.7531) - (xy 111.507771 52.719859) (xy 111.709865 52.654195) (xy 111.899206 52.55772) (xy 111.953366 52.51837) - (xy 111.321058 51.886062) (xy 111.384643 51.869025) (xy 111.498657 51.803199) (xy 111.591749 51.710107) - (xy 111.657575 51.596093) (xy 111.674612 51.532508) (xy 112.30692 52.164816) (xy 112.34627 52.110656) - (xy 112.442745 51.921315) (xy 112.508409 51.719221) (xy 112.54165 51.50935) (xy 112.54165 51.471443) - (xy 151.61645 51.471443) (xy 151.61645 51.629557) (xy 151.657373 51.782284) (xy 151.73643 51.919216) - (xy 151.848234 52.03102) (xy 151.985166 52.110077) (xy 152.137893 52.151) (xy 152.137895 52.151) - (xy 152.296005 52.151) (xy 152.296007 52.151) (xy 152.448734 52.110077) (xy 152.585666 52.03102) - (xy 152.69747 51.919216) (xy 152.776527 51.782284) (xy 152.81745 51.629557) (xy 152.81745 51.520043) - (xy 183.04425 51.520043) (xy 183.04425 51.678157) (xy 183.085173 51.830884) (xy 183.16423 51.967816) - (xy 183.276034 52.07962) (xy 183.412966 52.158677) (xy 183.565693 52.1996) (xy 183.565695 52.1996) - (xy 183.723805 52.1996) (xy 183.723807 52.1996) (xy 183.876534 52.158677) (xy 184.013466 52.07962) - (xy 184.12527 51.967816) (xy 184.204327 51.830884) (xy 184.24525 51.678157) (xy 184.24525 51.520043) - (xy 184.204327 51.367316) (xy 184.12527 51.230384) (xy 184.013466 51.11858) (xy 183.876534 51.039523) - (xy 183.723807 50.9986) (xy 183.565693 50.9986) (xy 183.412966 51.039523) (xy 183.276034 51.11858) - (xy 183.16423 51.230384) (xy 183.085173 51.367316) (xy 183.04425 51.520043) (xy 152.81745 51.520043) - (xy 152.81745 51.471443) (xy 152.776527 51.318716) (xy 152.69747 51.181784) (xy 152.585666 51.06998) - (xy 152.448734 50.990923) (xy 152.296007 50.95) (xy 152.137893 50.95) (xy 151.985166 50.990923) - (xy 151.848234 51.06998) (xy 151.73643 51.181784) (xy 151.657373 51.318716) (xy 151.61645 51.471443) - (xy 112.54165 51.471443) (xy 112.54165 51.296849) (xy 112.508409 51.086978) (xy 112.453616 50.918343) - (xy 188.96225 50.918343) (xy 188.96225 51.076457) (xy 189.003173 51.229184) (xy 189.08223 51.366116) - (xy 189.194034 51.47792) (xy 189.330966 51.556977) (xy 189.483693 51.5979) (xy 189.483695 51.5979) - (xy 189.641805 51.5979) (xy 189.641807 51.5979) (xy 189.794534 51.556977) (xy 189.931466 51.47792) - (xy 190.04327 51.366116) (xy 190.122327 51.229184) (xy 190.16325 51.076457) (xy 190.16325 50.918343) - (xy 190.122327 50.765616) (xy 190.085204 50.701317) (xy 190.072484 50.641472) (xy 190.097371 50.585576) - (xy 190.150359 50.554983) (xy 190.211209 50.561379) (xy 190.220429 50.566076) (xy 190.299066 50.611477) - (xy 190.451793 50.6524) (xy 190.451795 50.6524) (xy 190.609905 50.6524) (xy 190.609907 50.6524) - (xy 190.762634 50.611477) (xy 190.899566 50.53242) (xy 191.01137 50.420616) (xy 191.090427 50.283684) - (xy 191.13135 50.130957) (xy 191.13135 49.972843) (xy 191.090427 49.820116) (xy 191.01137 49.683184) - (xy 190.899566 49.57138) (xy 190.762634 49.492323) (xy 190.609907 49.4514) (xy 190.451793 49.4514) - (xy 190.299066 49.492323) (xy 190.162134 49.57138) (xy 190.05033 49.683184) (xy 189.971273 49.820116) - (xy 189.93035 49.972843) (xy 189.93035 50.130957) (xy 189.971273 50.283684) (xy 190.008394 50.34798) - (xy 190.021115 50.407828) (xy 189.996228 50.463723) (xy 189.94324 50.494316) (xy 189.88239 50.48792) - (xy 189.873158 50.483216) (xy 189.794535 50.437823) (xy 189.730316 50.420616) (xy 189.641807 50.3969) - (xy 189.483693 50.3969) (xy 189.330966 50.437823) (xy 189.194034 50.51688) (xy 189.08223 50.628684) - (xy 189.003173 50.765616) (xy 188.96225 50.918343) (xy 112.453616 50.918343) (xy 112.442745 50.884884) - (xy 112.346273 50.695546) (xy 112.346269 50.69554) (xy 112.30692 50.641382) (xy 112.306919 50.641382) - (xy 111.674612 51.273689) (xy 111.657575 51.210107) (xy 111.591749 51.096093) (xy 111.498657 51.003001) - (xy 111.384643 50.937175) (xy 111.321057 50.920137) (xy 111.953366 50.287829) (xy 111.953366 50.287828) - (xy 111.899209 50.24848) (xy 111.899203 50.248476) (xy 111.709865 50.152004) (xy 111.618665 50.122372) - (xy 111.569165 50.086408) (xy 111.550258 50.028217) (xy 111.569165 49.970026) (xy 111.618663 49.934062) - (xy 111.618667 49.934062) (xy 111.618668 49.934062) (xy 111.633283 49.929313) (xy 111.633283 49.929312) - (xy 111.633289 49.929311) (xy 111.794644 49.847096) (xy 111.941151 49.740653) (xy 111.968161 49.713643) - (xy 172.77165 49.713643) (xy 172.77165 49.871757) (xy 172.812573 50.024484) (xy 172.89163 50.161416) - (xy 173.003434 50.27322) (xy 173.140366 50.352277) (xy 173.293093 50.3932) (xy 173.293095 50.3932) - (xy 173.451205 50.3932) (xy 173.451207 50.3932) (xy 173.603934 50.352277) (xy 173.740866 50.27322) - (xy 173.85267 50.161416) (xy 173.931727 50.024484) (xy 173.97265 49.871757) (xy 173.97265 49.756143) - (xy 179.00285 49.756143) (xy 179.00285 49.914257) (xy 179.043773 50.066984) (xy 179.12283 50.203916) - (xy 179.234634 50.31572) (xy 179.371566 50.394777) (xy 179.524293 50.4357) (xy 179.524295 50.4357) - (xy 179.682405 50.4357) (xy 179.682407 50.4357) (xy 179.835134 50.394777) (xy 179.972066 50.31572) - (xy 180.08387 50.203916) (xy 180.162927 50.066984) (xy 180.20385 49.914257) (xy 180.20385 49.756143) - (xy 180.162927 49.603416) (xy 180.08387 49.466484) (xy 179.972066 49.35468) (xy 179.835134 49.275623) - (xy 179.682407 49.2347) (xy 179.524293 49.2347) (xy 179.371566 49.275623) (xy 179.234634 49.35468) - (xy 179.12283 49.466484) (xy 179.043773 49.603416) (xy 179.00285 49.756143) (xy 173.97265 49.756143) - (xy 173.97265 49.713643) (xy 173.931727 49.560916) (xy 173.85267 49.423984) (xy 173.740866 49.31218) - (xy 173.603934 49.233123) (xy 173.451207 49.1922) (xy 173.293093 49.1922) (xy 173.140366 49.233123) - (xy 173.003434 49.31218) (xy 172.89163 49.423984) (xy 172.812573 49.560916) (xy 172.77165 49.713643) - (xy 111.968161 49.713643) (xy 112.069203 49.612601) (xy 112.175646 49.466094) (xy 112.257861 49.304739) - (xy 112.313821 49.132509) (xy 112.327985 49.043077) (xy 112.34215 48.953649) (xy 112.34215 48.77255) - (xy 112.313821 48.593693) (xy 112.313821 48.593691) (xy 112.257861 48.421461) (xy 112.25786 48.421459) - (xy 112.257858 48.421453) (xy 112.215948 48.339201) (xy 112.215946 48.339199) (xy 112.196352 48.300743) - (xy 114.15765 48.300743) (xy 114.15765 48.458857) (xy 114.198573 48.611584) (xy 114.27763 48.748516) - (xy 114.389434 48.86032) (xy 114.526366 48.939377) (xy 114.679093 48.9803) (xy 114.679095 48.9803) - (xy 114.837205 48.9803) (xy 114.837207 48.9803) (xy 114.989934 48.939377) (xy 115.126866 48.86032) - (xy 115.238543 48.748643) (xy 195.41745 48.748643) (xy 195.41745 48.906757) (xy 195.458373 49.059484) - (xy 195.53743 49.196416) (xy 195.649234 49.30822) (xy 195.786166 49.387277) (xy 195.938893 49.4282) - (xy 195.938895 49.4282) (xy 196.097005 49.4282) (xy 196.097007 49.4282) (xy 196.249734 49.387277) - (xy 196.386666 49.30822) (xy 196.49847 49.196416) (xy 196.577527 49.059484) (xy 196.61845 48.906757) - (xy 196.61845 48.748643) (xy 196.577527 48.595916) (xy 196.49847 48.458984) (xy 196.452929 48.413443) - (xy 199.40675 48.413443) (xy 199.40675 48.571557) (xy 199.447673 48.724284) (xy 199.52673 48.861216) - (xy 199.638534 48.97302) (xy 199.775466 49.052077) (xy 199.928193 49.093) (xy 199.928195 49.093) - (xy 200.086305 49.093) (xy 200.086307 49.093) (xy 200.239034 49.052077) (xy 200.375966 48.97302) - (xy 200.48777 48.861216) (xy 200.566827 48.724284) (xy 200.60775 48.571557) (xy 200.60775 48.413443) - (xy 200.566827 48.260716) (xy 200.48777 48.123784) (xy 200.375966 48.01198) (xy 200.239034 47.932923) - (xy 200.086307 47.892) (xy 199.928193 47.892) (xy 199.775466 47.932923) (xy 199.638534 48.01198) - (xy 199.52673 48.123784) (xy 199.447673 48.260716) (xy 199.40675 48.413443) (xy 196.452929 48.413443) - (xy 196.386666 48.34718) (xy 196.249734 48.268123) (xy 196.097007 48.2272) (xy 195.938893 48.2272) - (xy 195.786166 48.268123) (xy 195.649234 48.34718) (xy 195.53743 48.458984) (xy 195.458373 48.595916) - (xy 195.41745 48.748643) (xy 115.238543 48.748643) (xy 115.23867 48.748516) (xy 115.317727 48.611584) - (xy 115.35865 48.458857) (xy 115.35865 48.300743) (xy 115.317727 48.148016) (xy 115.23867 48.011084) - (xy 115.126866 47.89928) (xy 114.989934 47.820223) (xy 114.837207 47.7793) (xy 114.679093 47.7793) - (xy 114.526366 47.820223) (xy 114.389434 47.89928) (xy 114.27763 48.011084) (xy 114.198573 48.148016) - (xy 114.15765 48.300743) (xy 112.196352 48.300743) (xy 112.175647 48.260108) (xy 112.175646 48.260106) - (xy 112.069203 48.113599) (xy 111.941151 47.985547) (xy 111.794644 47.879104) (xy 111.794643 47.879103) - (xy 111.794641 47.879102) (xy 111.633287 47.796888) (xy 111.461056 47.740928) (xy 111.282199 47.7126) - (xy 111.282196 47.7126) (xy 111.101104 47.7126) (xy 111.101101 47.7126) (xy 110.922243 47.740928) - (xy 110.750012 47.796888) (xy 110.588658 47.879102) (xy 110.570906 47.892) (xy 110.442149 47.985547) - (xy 110.314097 48.113599) (xy 110.289092 48.148016) (xy 110.207652 48.260108) (xy 110.125438 48.421462) - (xy 110.069478 48.593693) (xy 110.04115 48.77255) (xy 110.04115 48.953649) (xy 110.069478 49.132506) - (xy 110.125438 49.304737) (xy 110.186197 49.423984) (xy 110.207654 49.466094) (xy 110.314097 49.612601) - (xy 110.442149 49.740653) (xy 110.588656 49.847096) (xy 110.750011 49.929311) (xy 110.761133 49.932924) - (xy 110.764633 49.934062) (xy 110.814133 49.970026) (xy 110.833041 50.028216) (xy 110.814134 50.086407) - (xy 110.764635 50.122371) (xy 110.764634 50.122372) (xy 110.673434 50.152004) (xy 110.484096 50.248476) + (xy 209.187185 57.852822) (xy 209.359097 57.977724) (xy 209.548434 58.074195) (xy 209.750528 58.139859) + (xy 209.835556 58.153326) (xy 209.890072 58.181103) (xy 209.91785 58.23562) (xy 209.908279 58.296052) + (xy 209.865014 58.339317) (xy 209.839384 58.348205) (xy 209.774813 58.361049) (xy 209.592736 58.436467) + (xy 209.428868 58.545961) (xy 209.428864 58.545964) (xy 209.289514 58.685314) (xy 209.289511 58.685318) + (xy 209.180017 58.849186) (xy 209.104599 59.031263) (xy 209.104599 59.031265) (xy 209.06615 59.224556) + (xy 209.06615 59.421643) (xy 209.104599 59.614934) (xy 209.104599 59.614936) (xy 209.180017 59.797013) + (xy 209.180018 59.797014) (xy 209.289511 59.960882) (xy 209.428868 60.100239) (xy 209.592736 60.209732) + (xy 209.774815 60.285151) (xy 209.968109 60.3236) (xy 209.96811 60.3236) (xy 210.41519 60.3236) + (xy 210.415191 60.3236) (xy 210.608485 60.285151) (xy 210.790564 60.209732) (xy 210.954432 60.100239) + (xy 211.093789 59.960882) (xy 211.203282 59.797014) (xy 211.278701 59.614935) (xy 211.31715 59.421641) + (xy 211.31715 59.224559) (xy 211.278701 59.031265) (xy 211.203282 58.849186) (xy 211.093789 58.685318) + (xy 210.954432 58.545961) (xy 210.790564 58.436468) (xy 210.790565 58.436468) (xy 210.790563 58.436467) + (xy 210.608486 58.361049) (xy 210.543915 58.348205) (xy 210.490531 58.318308) (xy 210.464916 58.262742) + (xy 210.476853 58.202733) (xy 210.521783 58.1612) (xy 210.547743 58.153326) (xy 210.632771 58.139859) + (xy 210.834865 58.074195) (xy 211.024202 57.977724) (xy 211.196114 57.852822) (xy 211.346372 57.702564) + (xy 211.471274 57.530652) (xy 211.567745 57.341315) (xy 211.633408 57.139222) (xy 211.643881 57.0731) + (xy 210.595796 57.0731) (xy 210.63428 57.006443) (xy 210.66665 56.885635) (xy 210.66665 56.760565) + (xy 210.63428 56.639757) (xy 210.595796 56.5731) (xy 211.643881 56.5731) (xy 211.643881 56.573099) + (xy 211.633408 56.506977) (xy 211.567745 56.304884) (xy 211.471274 56.115547) (xy 211.346372 55.943635) + (xy 211.196114 55.793377) (xy 211.024202 55.668475) (xy 210.834865 55.572004) (xy 210.632772 55.506341) + (xy 210.547742 55.492873) (xy 210.493226 55.465095) (xy 210.465449 55.410578) (xy 210.475021 55.350146) + (xy 210.518286 55.306882) (xy 210.543913 55.297995) (xy 210.608485 55.285151) (xy 210.790564 55.209732) + (xy 210.954432 55.100239) (xy 211.093789 54.960882) (xy 211.203282 54.797014) (xy 211.278701 54.614935) + (xy 211.31715 54.421641) (xy 211.31715 54.224559) (xy 211.278701 54.031265) (xy 211.203282 53.849186) + (xy 211.093789 53.685318) (xy 210.954432 53.545961) (xy 210.790564 53.436468) (xy 210.790565 53.436468) + (xy 210.790563 53.436467) (xy 210.608485 53.361049) (xy 210.415193 53.3226) (xy 210.415191 53.3226) + (xy 209.968109 53.3226) (xy 209.968106 53.3226) (xy 209.774815 53.361049) (xy 209.774813 53.361049) + (xy 209.592736 53.436467) (xy 209.428868 53.545961) (xy 209.428864 53.545964) (xy 209.289514 53.685314) + (xy 209.289511 53.685318) (xy 209.180017 53.849186) (xy 209.104599 54.031263) (xy 209.104599 54.031265) + (xy 209.06615 54.224556) (xy 209.06615 54.421643) (xy 209.104599 54.614934) (xy 209.104599 54.614936) + (xy 209.180017 54.797013) (xy 209.215938 54.850772) (xy 209.289511 54.960882) (xy 209.428868 55.100239) + (xy 209.592736 55.209732) (xy 209.774815 55.285151) (xy 209.839384 55.297994) (xy 209.892767 55.327891) + (xy 209.918383 55.383456) (xy 209.906446 55.443465) (xy 209.861517 55.484998) (xy 209.835557 55.492873) + (xy 209.750527 55.506341) (xy 209.548434 55.572004) (xy 209.359097 55.668475) (xy 209.187185 55.793377) + (xy 209.036927 55.943635) (xy 208.912025 56.115547) (xy 208.815554 56.304884) (xy 208.749891 56.506977) + (xy 208.739418 56.573099) (xy 195.272219 56.573099) (xy 195.348146 56.468594) (xy 195.430361 56.307239) + (xy 195.486321 56.135009) (xy 195.502753 56.031263) (xy 195.51465 55.956149) (xy 195.51465 55.77505) + (xy 195.493134 55.639208) (xy 195.486321 55.596191) (xy 195.430361 55.423961) (xy 195.348146 55.262606) + (xy 195.241703 55.116099) (xy 195.113651 54.988047) (xy 194.967144 54.881604) (xy 194.967143 54.881603) + (xy 194.967141 54.881602) (xy 194.805787 54.799388) (xy 194.633556 54.743428) (xy 194.454699 54.7151) + (xy 194.454696 54.7151) (xy 194.273604 54.7151) (xy 194.273601 54.7151) (xy 194.094743 54.743428) + (xy 193.922512 54.799388) (xy 193.761158 54.881602) (xy 193.687902 54.934825) (xy 193.614649 54.988047) + (xy 193.486597 55.116099) (xy 193.451151 55.164887) (xy 193.380152 55.262608) (xy 193.297938 55.423962) + (xy 193.241978 55.596193) (xy 193.21365 55.77505) (xy 190.43465 55.77505) (xy 190.43465 54.85078) + (xy 190.434649 54.850778) (xy 190.434649 54.850772) (xy 190.425917 54.806879) (xy 190.425915 54.806875) + (xy 190.392655 54.757098) (xy 190.392654 54.757096) (xy 190.372198 54.743428) (xy 190.342874 54.723834) + (xy 190.34287 54.723832) (xy 190.298977 54.7151) (xy 190.29897 54.7151) (xy 188.26933 54.7151) (xy 188.269322 54.7151) + (xy 188.225429 54.723832) (xy 188.225425 54.723834) (xy 188.175648 54.757094) (xy 188.175644 54.757098) + (xy 188.142384 54.806875) (xy 188.142382 54.806879) (xy 188.13365 54.850772) (xy 80.776102 54.850772) + (xy 80.774521 53.286991) (xy 172.95615 53.286991) (xy 172.95615 53.405609) (xy 172.964419 53.436468) + (xy 172.986852 53.52019) (xy 173.046157 53.622908) (xy 173.046159 53.62291) (xy 173.046161 53.622913) + (xy 173.130037 53.706789) (xy 173.130039 53.70679) (xy 173.130041 53.706792) (xy 173.23276 53.766097) + (xy 173.232761 53.766097) (xy 173.232764 53.766099) (xy 173.347341 53.7968) (xy 173.347343 53.7968) + (xy 173.465957 53.7968) (xy 173.465959 53.7968) (xy 173.580536 53.766099) (xy 173.580538 53.766097) + (xy 173.58054 53.766097) (xy 173.683258 53.706792) (xy 173.683258 53.706791) (xy 173.683263 53.706789) + (xy 173.767139 53.622913) (xy 173.826449 53.520186) (xy 173.85715 53.405609) (xy 173.85715 53.286991) + (xy 173.826449 53.172414) (xy 173.826447 53.172411) (xy 173.826447 53.172409) (xy 173.767142 53.069691) + (xy 173.76714 53.069689) (xy 173.767139 53.069687) (xy 173.683263 52.985811) (xy 173.68326 52.985809) + (xy 173.683258 52.985807) (xy 173.580539 52.926502) (xy 173.58054 52.926502) (xy 173.567001 52.922874) + (xy 173.465959 52.8958) (xy 173.347341 52.8958) (xy 173.277217 52.914589) (xy 173.232759 52.926502) + (xy 173.130041 52.985807) (xy 173.046157 53.069691) (xy 172.986852 53.172409) (xy 172.986851 53.172414) + (xy 172.95615 53.286991) (xy 80.774521 53.286991) (xy 80.772509 51.296849) (xy 109.84165 51.296849) + (xy 109.84165 51.50935) (xy 109.87489 51.719221) (xy 109.940554 51.921315) (xy 110.037026 52.110653) + (xy 110.03703 52.110659) (xy 110.076378 52.164816) (xy 110.076379 52.164816) (xy 110.708687 51.532507) + (xy 110.725725 51.596093) (xy 110.791551 51.710107) (xy 110.884643 51.803199) (xy 110.998657 51.869025) + (xy 111.062239 51.886062) (xy 110.429932 52.518369) (xy 110.429932 52.51837) (xy 110.48409 52.557719) + (xy 110.484096 52.557723) (xy 110.673434 52.654195) (xy 110.875528 52.719859) (xy 111.0854 52.7531) + (xy 111.2979 52.7531) (xy 111.507771 52.719859) (xy 111.709865 52.654195) (xy 111.899206 52.55772) + (xy 111.953366 52.51837) (xy 111.321058 51.886062) (xy 111.384643 51.869025) (xy 111.498657 51.803199) + (xy 111.591749 51.710107) (xy 111.657575 51.596093) (xy 111.674612 51.532508) (xy 112.30692 52.164816) + (xy 112.34627 52.110656) (xy 112.442745 51.921315) (xy 112.508409 51.719221) (xy 112.54165 51.50935) + (xy 112.54165 51.491191) (xy 151.76645 51.491191) (xy 151.76645 51.609809) (xy 151.793325 51.710107) + (xy 151.797152 51.72439) (xy 151.856457 51.827108) (xy 151.856459 51.82711) (xy 151.856461 51.827113) + (xy 151.940337 51.910989) (xy 151.940339 51.91099) (xy 151.940341 51.910992) (xy 152.04306 51.970297) + (xy 152.043061 51.970297) (xy 152.043064 51.970299) (xy 152.157641 52.001) (xy 152.157643 52.001) + (xy 152.276257 52.001) (xy 152.276259 52.001) (xy 152.390836 51.970299) (xy 152.390838 51.970297) + (xy 152.39084 51.970297) (xy 152.493558 51.910992) (xy 152.493558 51.910991) (xy 152.493563 51.910989) + (xy 152.577439 51.827113) (xy 152.60869 51.772986) (xy 152.636747 51.72439) (xy 152.636747 51.724388) + (xy 152.636749 51.724386) (xy 152.66745 51.609809) (xy 152.66745 51.539791) (xy 183.19425 51.539791) + (xy 183.19425 51.658409) (xy 183.208103 51.710107) (xy 183.224952 51.77299) (xy 183.284257 51.875708) + (xy 183.284259 51.87571) (xy 183.284261 51.875713) (xy 183.368137 51.959589) (xy 183.368139 51.95959) + (xy 183.368141 51.959592) (xy 183.47086 52.018897) (xy 183.470861 52.018897) (xy 183.470864 52.018899) + (xy 183.585441 52.0496) (xy 183.585443 52.0496) (xy 183.704057 52.0496) (xy 183.704059 52.0496) + (xy 183.818636 52.018899) (xy 183.818638 52.018897) (xy 183.81864 52.018897) (xy 183.921358 51.959592) + (xy 183.921358 51.959591) (xy 183.921363 51.959589) (xy 184.005239 51.875713) (xy 184.0091 51.869025) + (xy 184.064547 51.77299) (xy 184.064547 51.772988) (xy 184.064549 51.772986) (xy 184.09525 51.658409) + (xy 184.09525 51.539791) (xy 184.064549 51.425214) (xy 184.064547 51.425211) (xy 184.064547 51.425209) + (xy 184.005242 51.322491) (xy 184.00524 51.322489) (xy 184.005239 51.322487) (xy 183.921363 51.238611) + (xy 183.92136 51.238609) (xy 183.921358 51.238607) (xy 183.818639 51.179302) (xy 183.81864 51.179302) + (xy 183.805101 51.175674) (xy 183.704059 51.1486) (xy 183.585441 51.1486) (xy 183.515317 51.167389) + (xy 183.470859 51.179302) (xy 183.368141 51.238607) (xy 183.284257 51.322491) (xy 183.224952 51.425209) + (xy 183.224951 51.425214) (xy 183.19425 51.539791) (xy 152.66745 51.539791) (xy 152.66745 51.491191) + (xy 152.636749 51.376614) (xy 152.636747 51.376611) (xy 152.636747 51.376609) (xy 152.577442 51.273891) + (xy 152.57744 51.273889) (xy 152.577439 51.273887) (xy 152.493563 51.190011) (xy 152.49356 51.190009) + (xy 152.493558 51.190007) (xy 152.390839 51.130702) (xy 152.39084 51.130702) (xy 152.377301 51.127074) + (xy 152.276259 51.1) (xy 152.157641 51.1) (xy 152.087517 51.118789) (xy 152.043059 51.130702) (xy 151.940341 51.190007) + (xy 151.856457 51.273891) (xy 151.797152 51.376609) (xy 151.797151 51.376614) (xy 151.76645 51.491191) + (xy 112.54165 51.491191) (xy 112.54165 51.296849) (xy 112.508408 51.086976) (xy 112.467865 50.962194) + (xy 112.460033 50.938091) (xy 189.11225 50.938091) (xy 189.11225 51.056709) (xy 189.136872 51.1486) + (xy 189.142952 51.17129) (xy 189.202257 51.274008) (xy 189.202259 51.27401) (xy 189.202261 51.274013) + (xy 189.286137 51.357889) (xy 189.286139 51.35789) (xy 189.286141 51.357892) (xy 189.38886 51.417197) + (xy 189.388861 51.417197) (xy 189.388864 51.417199) (xy 189.503441 51.4479) (xy 189.503443 51.4479) + (xy 189.622057 51.4479) (xy 189.622059 51.4479) (xy 189.736636 51.417199) (xy 189.736638 51.417197) + (xy 189.73664 51.417197) (xy 189.839358 51.357892) (xy 189.839358 51.357891) (xy 189.839363 51.357889) + (xy 189.923239 51.274013) (xy 189.923242 51.274008) (xy 189.982547 51.17129) (xy 189.982547 51.171288) + (xy 189.982549 51.171286) (xy 190.01325 51.056709) (xy 190.01325 50.938091) (xy 189.982549 50.823514) + (xy 189.982547 50.823511) (xy 189.982547 50.823509) (xy 189.923242 50.720791) (xy 189.92324 50.720789) + (xy 189.923239 50.720787) (xy 189.839363 50.636911) (xy 189.83936 50.636909) (xy 189.839358 50.636907) + (xy 189.736639 50.577602) (xy 189.73664 50.577602) (xy 189.723101 50.573974) (xy 189.622059 50.5469) + (xy 189.503441 50.5469) (xy 189.433317 50.565689) (xy 189.388859 50.577602) (xy 189.286141 50.636907) + (xy 189.202257 50.720791) (xy 189.142952 50.823509) (xy 189.142951 50.823514) (xy 189.11225 50.938091) + (xy 112.460033 50.938091) (xy 112.442745 50.884884) (xy 112.346273 50.695546) (xy 112.346269 50.69554) + (xy 112.30692 50.641382) (xy 112.306919 50.641382) (xy 111.674612 51.273689) (xy 111.657575 51.210107) + (xy 111.591749 51.096093) (xy 111.498657 51.003001) (xy 111.384643 50.937175) (xy 111.321057 50.920137) + (xy 111.953366 50.287829) (xy 111.953366 50.287828) (xy 111.899209 50.24848) (xy 111.899203 50.248476) + (xy 111.709865 50.152004) (xy 111.507771 50.08634) (xy 111.310793 50.055142) (xy 111.256276 50.027364) + (xy 111.228499 49.972848) (xy 111.23807 49.912416) (xy 111.281335 49.869151) (xy 111.306964 49.860263) + (xy 111.483485 49.825151) (xy 111.665564 49.749732) (xy 111.69002 49.733391) (xy 172.92165 49.733391) + (xy 172.92165 49.852009) (xy 172.933038 49.894509) (xy 172.952352 49.96659) (xy 173.011657 50.069308) + (xy 173.011659 50.06931) (xy 173.011661 50.069313) (xy 173.095537 50.153189) (xy 173.095539 50.15319) + (xy 173.095541 50.153192) (xy 173.19826 50.212497) (xy 173.198261 50.212497) (xy 173.198264 50.212499) + (xy 173.312841 50.2432) (xy 173.312843 50.2432) (xy 173.431457 50.2432) (xy 173.431459 50.2432) + (xy 173.546036 50.212499) (xy 173.546038 50.212497) (xy 173.54604 50.212497) (xy 173.648758 50.153192) + (xy 173.648758 50.153191) (xy 173.648763 50.153189) (xy 173.732639 50.069313) (xy 173.740821 50.055142) + (xy 173.791947 49.96659) (xy 173.791947 49.966588) (xy 173.791949 49.966586) (xy 173.82265 49.852009) + (xy 173.82265 49.775891) (xy 179.15285 49.775891) (xy 179.15285 49.894509) (xy 179.172163 49.966586) + (xy 179.183552 50.00909) (xy 179.242857 50.111808) (xy 179.242859 50.11181) (xy 179.242861 50.111813) + (xy 179.326737 50.195689) (xy 179.326739 50.19569) (xy 179.326741 50.195692) (xy 179.42946 50.254997) + (xy 179.429461 50.254997) (xy 179.429464 50.254999) (xy 179.544041 50.2857) (xy 179.544043 50.2857) + (xy 179.662657 50.2857) (xy 179.662659 50.2857) (xy 179.777236 50.254999) (xy 179.777238 50.254997) + (xy 179.77724 50.254997) (xy 179.879958 50.195692) (xy 179.879958 50.195691) (xy 179.879963 50.195689) + (xy 179.963839 50.111813) (xy 179.98838 50.069308) (xy 180.023146 50.009091) (xy 180.023145 50.009091) + (xy 180.023149 50.009086) (xy 180.027569 49.992591) (xy 190.08035 49.992591) (xy 190.08035 50.111209) + (xy 190.102987 50.195692) (xy 190.111052 50.22579) (xy 190.170357 50.328508) (xy 190.170359 50.32851) + (xy 190.170361 50.328513) (xy 190.254237 50.412389) (xy 190.254239 50.41239) (xy 190.254241 50.412392) + (xy 190.35696 50.471697) (xy 190.356961 50.471697) (xy 190.356964 50.471699) (xy 190.471541 50.5024) + (xy 190.471543 50.5024) (xy 190.590157 50.5024) (xy 190.590159 50.5024) (xy 190.704736 50.471699) + (xy 190.704738 50.471697) (xy 190.70474 50.471697) (xy 190.807458 50.412392) (xy 190.807458 50.412391) + (xy 190.807463 50.412389) (xy 190.891339 50.328513) (xy 190.914829 50.287828) (xy 190.950647 50.22579) + (xy 190.950647 50.225788) (xy 190.950649 50.225786) (xy 190.98135 50.111209) (xy 190.98135 49.992591) + (xy 190.950649 49.878014) (xy 190.950647 49.878011) (xy 190.950647 49.878009) (xy 190.891342 49.775291) + (xy 190.89134 49.775289) (xy 190.891339 49.775287) (xy 190.807463 49.691411) (xy 190.80746 49.691409) + (xy 190.807458 49.691407) (xy 190.704739 49.632102) (xy 190.70474 49.632102) (xy 190.691201 49.628474) + (xy 190.590159 49.6014) (xy 190.471541 49.6014) (xy 190.401417 49.620189) (xy 190.356959 49.632102) + (xy 190.254241 49.691407) (xy 190.170357 49.775291) (xy 190.111052 49.878009) (xy 190.106631 49.894509) + (xy 190.08035 49.992591) (xy 180.027569 49.992591) (xy 180.05385 49.894509) (xy 180.05385 49.775891) + (xy 180.023149 49.661314) (xy 180.023147 49.661311) (xy 180.023147 49.661309) (xy 179.963842 49.558591) + (xy 179.96384 49.558589) (xy 179.963839 49.558587) (xy 179.879963 49.474711) (xy 179.87996 49.474709) + (xy 179.879958 49.474707) (xy 179.777239 49.415402) (xy 179.77724 49.415402) (xy 179.763701 49.411774) + (xy 179.662659 49.3847) (xy 179.544041 49.3847) (xy 179.473917 49.403489) (xy 179.429459 49.415402) + (xy 179.326741 49.474707) (xy 179.242857 49.558591) (xy 179.183552 49.661309) (xy 179.175486 49.691411) + (xy 179.15285 49.775891) (xy 173.82265 49.775891) (xy 173.82265 49.733391) (xy 173.791949 49.618814) + (xy 173.791947 49.618811) (xy 173.791947 49.618809) (xy 173.732642 49.516091) (xy 173.73264 49.516089) + (xy 173.732639 49.516087) (xy 173.648763 49.432211) (xy 173.64876 49.432209) (xy 173.648758 49.432207) + (xy 173.546039 49.372902) (xy 173.54604 49.372902) (xy 173.532501 49.369274) (xy 173.431459 49.3422) + (xy 173.312841 49.3422) (xy 173.242717 49.360989) (xy 173.198259 49.372902) (xy 173.095541 49.432207) + (xy 173.011657 49.516091) (xy 172.952352 49.618809) (xy 172.94879 49.632102) (xy 172.92165 49.733391) + (xy 111.69002 49.733391) (xy 111.829432 49.640239) (xy 111.968789 49.500882) (xy 112.078282 49.337014) + (xy 112.153701 49.154935) (xy 112.19215 48.961641) (xy 112.19215 48.764559) (xy 112.153701 48.571265) + (xy 112.078282 48.389186) (xy 112.032382 48.320491) (xy 114.30765 48.320491) (xy 114.30765 48.439109) + (xy 114.315179 48.467207) (xy 114.338352 48.55369) (xy 114.397657 48.656408) (xy 114.397659 48.65641) + (xy 114.397661 48.656413) (xy 114.481537 48.740289) (xy 114.481539 48.74029) (xy 114.481541 48.740292) + (xy 114.58426 48.799597) (xy 114.584261 48.799597) (xy 114.584264 48.799599) (xy 114.698841 48.8303) + (xy 114.698843 48.8303) (xy 114.817457 48.8303) (xy 114.817459 48.8303) (xy 114.932036 48.799599) + (xy 114.932038 48.799597) (xy 114.93204 48.799597) (xy 114.98609 48.768391) (xy 195.56745 48.768391) + (xy 195.56745 48.887009) (xy 195.582453 48.943) (xy 195.598152 49.00159) (xy 195.657457 49.104308) + (xy 195.657459 49.10431) (xy 195.657461 49.104313) (xy 195.741337 49.188189) (xy 195.741339 49.18819) + (xy 195.741341 49.188192) (xy 195.84406 49.247497) (xy 195.844061 49.247497) (xy 195.844064 49.247499) + (xy 195.958641 49.2782) (xy 195.958643 49.2782) (xy 196.077257 49.2782) (xy 196.077259 49.2782) + (xy 196.191836 49.247499) (xy 196.191838 49.247497) (xy 196.19184 49.247497) (xy 196.294558 49.188192) + (xy 196.294558 49.188191) (xy 196.294563 49.188189) (xy 196.378439 49.104313) (xy 196.437749 49.001586) + (xy 196.46845 48.887009) (xy 196.46845 48.768391) (xy 196.437749 48.653814) (xy 196.437747 48.653811) + (xy 196.437747 48.653809) (xy 196.378442 48.551091) (xy 196.37844 48.551089) (xy 196.378439 48.551087) + (xy 196.294563 48.467211) (xy 196.29456 48.467209) (xy 196.294558 48.467207) (xy 196.235641 48.433191) + (xy 199.55675 48.433191) (xy 199.55675 48.551809) (xy 199.583824 48.652851) (xy 199.587452 48.66639) + (xy 199.646757 48.769108) (xy 199.646759 48.76911) (xy 199.646761 48.769113) (xy 199.730637 48.852989) + (xy 199.730639 48.85299) (xy 199.730641 48.852992) (xy 199.83336 48.912297) (xy 199.833361 48.912297) + (xy 199.833364 48.912299) (xy 199.947941 48.943) (xy 199.947943 48.943) (xy 200.066557 48.943) (xy 200.066559 48.943) + (xy 200.181136 48.912299) (xy 200.181138 48.912297) (xy 200.18114 48.912297) (xy 200.283858 48.852992) + (xy 200.283858 48.852991) (xy 200.283863 48.852989) (xy 200.367739 48.769113) (xy 200.427049 48.666386) + (xy 200.45775 48.551809) (xy 200.45775 48.433191) (xy 200.427049 48.318614) (xy 200.427047 48.318611) + (xy 200.427047 48.318609) (xy 200.367742 48.215891) (xy 200.36774 48.215889) (xy 200.367739 48.215887) + (xy 200.283863 48.132011) (xy 200.28386 48.132009) (xy 200.283858 48.132007) (xy 200.181139 48.072702) + (xy 200.18114 48.072702) (xy 200.167601 48.069074) (xy 200.066559 48.042) (xy 199.947941 48.042) + (xy 199.877817 48.060789) (xy 199.833359 48.072702) (xy 199.730641 48.132007) (xy 199.646757 48.215891) + (xy 199.587452 48.318609) (xy 199.573949 48.369004) (xy 199.55675 48.433191) (xy 196.235641 48.433191) + (xy 196.191839 48.407902) (xy 196.19184 48.407902) (xy 196.178301 48.404274) (xy 196.077259 48.3772) + (xy 195.958641 48.3772) (xy 195.888517 48.395989) (xy 195.844059 48.407902) (xy 195.741341 48.467207) + (xy 195.657457 48.551091) (xy 195.598152 48.653809) (xy 195.594782 48.666386) (xy 195.56745 48.768391) + (xy 114.98609 48.768391) (xy 115.034758 48.740292) (xy 115.034758 48.740291) (xy 115.034763 48.740289) + (xy 115.118639 48.656413) (xy 115.12014 48.653814) (xy 115.177947 48.55369) (xy 115.177947 48.553688) + (xy 115.177949 48.553686) (xy 115.20865 48.439109) (xy 115.20865 48.320491) (xy 115.177949 48.205914) + (xy 115.177947 48.205911) (xy 115.177947 48.205909) (xy 115.118642 48.103191) (xy 115.11864 48.103189) + (xy 115.118639 48.103187) (xy 115.034763 48.019311) (xy 115.03476 48.019309) (xy 115.034758 48.019307) + (xy 114.932039 47.960002) (xy 114.93204 47.960002) (xy 114.918501 47.956374) (xy 114.817459 47.9293) + (xy 114.698841 47.9293) (xy 114.628717 47.948089) (xy 114.584259 47.960002) (xy 114.481541 48.019307) + (xy 114.397657 48.103191) (xy 114.338352 48.205909) (xy 114.321187 48.269969) (xy 114.30765 48.320491) + (xy 112.032382 48.320491) (xy 111.968789 48.225318) (xy 111.829432 48.085961) (xy 111.665564 47.976468) + (xy 111.665565 47.976468) (xy 111.665563 47.976467) (xy 111.483485 47.901049) (xy 111.290193 47.8626) + (xy 111.290191 47.8626) (xy 111.093109 47.8626) (xy 111.093106 47.8626) (xy 110.899815 47.901049) + (xy 110.899813 47.901049) (xy 110.717736 47.976467) (xy 110.553868 48.085961) (xy 110.553864 48.085964) + (xy 110.414514 48.225314) (xy 110.414511 48.225318) (xy 110.305017 48.389186) (xy 110.229599 48.571263) + (xy 110.229599 48.571265) (xy 110.19115 48.764556) (xy 110.19115 48.961643) (xy 110.229599 49.154934) + (xy 110.229599 49.154936) (xy 110.305017 49.337013) (xy 110.336881 49.3847) (xy 110.414511 49.500882) + (xy 110.553868 49.640239) (xy 110.717736 49.749732) (xy 110.899815 49.825151) (xy 111.076333 49.860263) + (xy 111.129717 49.89016) (xy 111.155333 49.945725) (xy 111.143396 50.005735) (xy 111.098466 50.047267) + (xy 111.072506 50.055142) (xy 110.875528 50.08634) (xy 110.673434 50.152004) (xy 110.484096 50.248476) (xy 110.484092 50.248478) (xy 110.429932 50.287828) (xy 111.062241 50.920137) (xy 110.998657 50.937175) (xy 110.884643 51.003001) (xy 110.791551 51.096093) (xy 110.725725 51.210107) (xy 110.708687 51.273691) (xy 110.076378 50.641382) (xy 110.037028 50.695542) (xy 110.037026 50.695546) (xy 109.940554 50.884884) - (xy 109.87489 51.086978) (xy 109.84165 51.296849) (xy 80.77251 51.296849) (xy 80.766349 45.20181) + (xy 109.87489 51.086978) (xy 109.84165 51.296849) (xy 80.772509 51.296849) (xy 80.766348 45.20181) (xy 83.34115 45.20181) (xy 83.34115 45.444389) (xy 83.372811 45.684881) (xy 83.372811 45.684886) - (xy 83.435594 45.919192) (xy 83.435598 45.919205) (xy 83.528422 46.143304) (xy 83.528424 46.143308) - (xy 83.528426 46.143312) (xy 83.649714 46.353389) (xy 83.649716 46.353392) (xy 83.797379 46.545831) - (xy 83.797381 46.545833) (xy 83.797385 46.545838) (xy 83.968912 46.717365) (xy 83.968916 46.717368) - (xy 83.968918 46.71737) (xy 84.081322 46.80362) (xy 84.161361 46.865036) (xy 84.371438 46.986324) - (xy 84.59555 47.079154) (xy 84.829861 47.141938) (xy 85.070362 47.1736) (xy 85.070363 47.1736) (xy 85.312937 47.1736) - (xy 85.312938 47.1736) (xy 85.553439 47.141938) (xy 85.78775 47.079154) (xy 86.011862 46.986324) - (xy 86.221939 46.865036) (xy 86.414388 46.717365) (xy 86.585915 46.545838) (xy 86.733586 46.353389) - (xy 86.789078 46.257274) (xy 86.796717 46.244043) (xy 93.98385 46.244043) (xy 93.98385 46.402157) - (xy 94.024773 46.554884) (xy 94.10383 46.691816) (xy 94.215634 46.80362) (xy 94.352566 46.882677) - (xy 94.505293 46.9236) (xy 94.505295 46.9236) (xy 94.663405 46.9236) (xy 94.663407 46.9236) (xy 94.816134 46.882677) - (xy 94.953066 46.80362) (xy 95.06487 46.691816) (xy 95.143927 46.554884) (xy 95.18485 46.402157) - (xy 95.18485 46.244043) (xy 95.143927 46.091316) (xy 95.06487 45.954384) (xy 94.953066 45.84258) - (xy 94.816134 45.763523) (xy 94.663407 45.7226) (xy 94.505293 45.7226) (xy 94.352566 45.763523) - (xy 94.215634 45.84258) (xy 94.10383 45.954384) (xy 94.024773 46.091316) (xy 93.98385 46.244043) - (xy 86.796717 46.244043) (xy 86.829043 46.188054) (xy 86.854876 46.143308) (xy 86.886546 46.066849) - (xy 86.947704 45.9192) (xy 87.010488 45.684889) (xy 87.027589 45.554993) (xy 97.04115 45.554993) - (xy 97.04115 47.091206) (xy 97.051773 47.179665) (xy 97.107287 47.320439) (xy 97.107288 47.320441) - (xy 97.107289 47.320442) (xy 97.198728 47.441022) (xy 97.319308 47.532461) (xy 97.319309 47.532461) - (xy 97.31931 47.532462) (xy 97.336678 47.539311) (xy 97.460086 47.587977) (xy 97.548548 47.5986) - (xy 97.54855 47.5986) (xy 98.83475 47.5986) (xy 98.834752 47.5986) (xy 98.923214 47.587977) (xy 99.063992 47.532461) - (xy 99.184572 47.441022) (xy 99.276011 47.320442) (xy 99.331527 47.179664) (xy 99.334262 47.156882) - (xy 99.359971 47.101362) (xy 99.413406 47.071556) (xy 99.474155 47.07885) (xy 99.519014 47.120458) - (xy 99.520765 47.12374) (xy 99.537023 47.155648) (xy 99.537024 47.15565) (xy 99.661927 47.327564) - (xy 99.812185 47.477822) (xy 99.984097 47.602724) (xy 100.173434 47.699195) (xy 100.375527 47.764858) - (xy 100.441649 47.775331) (xy 100.44165 47.77533) (xy 100.44165 46.727245) (xy 100.508307 46.76573) - (xy 100.629115 46.7981) (xy 100.754185 46.7981) (xy 100.874993 46.76573) (xy 100.94165 46.727245) - (xy 100.94165 47.775331) (xy 101.007772 47.764858) (xy 101.209865 47.699195) (xy 101.399202 47.602724) - (xy 101.571114 47.477822) (xy 101.721372 47.327564) (xy 101.846274 47.155652) (xy 101.942747 46.966312) - (xy 101.955218 46.927928) (xy 101.991181 46.878427) (xy 102.049371 46.859519) (xy 102.107562 46.878425) - (xy 102.137582 46.913573) (xy 102.20765 47.051088) (xy 102.207651 47.05109) (xy 102.207652 47.051091) - (xy 102.207654 47.051094) (xy 102.314097 47.197601) (xy 102.442149 47.325653) (xy 102.588656 47.432096) - (xy 102.750011 47.514311) (xy 102.922241 47.570271) (xy 102.993786 47.581602) (xy 103.101101 47.5986) - (xy 103.101104 47.5986) (xy 103.282199 47.5986) (xy 103.371627 47.584435) (xy 103.461059 47.570271) - (xy 103.633289 47.514311) (xy 103.794644 47.432096) (xy 103.941151 47.325653) (xy 104.069203 47.197601) - (xy 104.175646 47.051094) (xy 104.257861 46.889739) (xy 104.313821 46.717509) (xy 104.33819 46.563649) - (xy 104.34215 46.538649) (xy 104.34215 46.10755) (xy 104.54115 46.10755) (xy 104.54115 46.538649) - (xy 104.569478 46.717506) (xy 104.625438 46.889737) (xy 104.707651 47.05109) (xy 104.707654 47.051094) - (xy 104.814097 47.197601) (xy 104.942149 47.325653) (xy 105.088656 47.432096) (xy 105.250011 47.514311) - (xy 105.422241 47.570271) (xy 105.493786 47.581602) (xy 105.601101 47.5986) (xy 105.601104 47.5986) - (xy 105.782199 47.5986) (xy 105.871627 47.584435) (xy 105.961059 47.570271) (xy 106.133289 47.514311) - (xy 106.294644 47.432096) (xy 106.441151 47.325653) (xy 106.569203 47.197601) (xy 106.675646 47.051094) - (xy 106.757861 46.889739) (xy 106.813821 46.717509) (xy 106.83819 46.563649) (xy 106.84215 46.538649) - (xy 106.84215 46.10755) (xy 106.813821 45.928693) (xy 106.813821 45.928691) (xy 106.757861 45.756461) - (xy 106.675646 45.595106) (xy 106.569203 45.448599) (xy 106.548834 45.42823) (xy 110.04115 45.42823) - (xy 110.04115 47.21796) (xy 110.041151 47.217963) (xy 110.044064 47.24309) (xy 110.069406 47.300485) - (xy 110.089444 47.345865) (xy 110.168885 47.425306) (xy 110.271659 47.470685) (xy 110.296785 47.4736) - (xy 112.086514 47.473599) (xy 112.111641 47.470685) (xy 112.214415 47.425306) (xy 112.293856 47.345865) - (xy 112.339235 47.243091) (xy 112.34215 47.217965) (xy 112.342149 45.554993) (xy 115.04115 45.554993) - (xy 115.04115 47.091206) (xy 115.051773 47.179665) (xy 115.107287 47.320439) (xy 115.107288 47.320441) - (xy 115.107289 47.320442) (xy 115.198728 47.441022) (xy 115.319308 47.532461) (xy 115.319309 47.532461) - (xy 115.31931 47.532462) (xy 115.336678 47.539311) (xy 115.460086 47.587977) (xy 115.548548 47.5986) - (xy 115.54855 47.5986) (xy 116.83475 47.5986) (xy 116.834752 47.5986) (xy 116.923214 47.587977) - (xy 117.063992 47.532461) (xy 117.184572 47.441022) (xy 117.276011 47.320442) (xy 117.331527 47.179664) - (xy 117.34215 47.091202) (xy 117.34215 46.10755) (xy 117.54115 46.10755) (xy 117.54115 46.538649) - (xy 117.569478 46.717506) (xy 117.625438 46.889737) (xy 117.707651 47.05109) (xy 117.707654 47.051094) - (xy 117.814097 47.197601) (xy 117.942149 47.325653) (xy 118.088656 47.432096) (xy 118.250011 47.514311) - (xy 118.422241 47.570271) (xy 118.493786 47.581602) (xy 118.601101 47.5986) (xy 118.601104 47.5986) - (xy 118.782199 47.5986) (xy 118.871627 47.584435) (xy 118.961059 47.570271) (xy 119.133289 47.514311) - (xy 119.294644 47.432096) (xy 119.441151 47.325653) (xy 119.569203 47.197601) (xy 119.675646 47.051094) - (xy 119.745716 46.913573) (xy 119.788981 46.870309) (xy 119.849413 46.860738) (xy 119.90393 46.888515) - (xy 119.92808 46.927926) (xy 119.940551 46.966309) (xy 120.037025 47.155652) (xy 120.161927 47.327564) - (xy 120.312185 47.477822) (xy 120.484097 47.602724) (xy 120.673434 47.699195) (xy 120.875527 47.764858) - (xy 120.941649 47.775331) (xy 120.94165 47.77533) (xy 120.94165 46.727245) (xy 121.008307 46.76573) - (xy 121.129115 46.7981) (xy 121.254185 46.7981) (xy 121.374993 46.76573) (xy 121.44165 46.727245) - (xy 121.44165 47.775331) (xy 121.507772 47.764858) (xy 121.709865 47.699195) (xy 121.899202 47.602724) - (xy 122.071114 47.477822) (xy 122.221372 47.327564) (xy 122.346274 47.155652) (xy 122.442745 46.966315) - (xy 122.508409 46.764221) (xy 122.53868 46.5731) (xy 121.595796 46.5731) (xy 121.63428 46.506443) - (xy 121.66665 46.385635) (xy 121.66665 46.260565) (xy 121.63428 46.139757) (xy 121.595796 46.0731) - (xy 122.53868 46.0731) (xy 122.53868 46.073099) (xy 122.508409 45.881978) (xy 122.442745 45.679884) - (xy 122.387768 45.571984) (xy 122.366372 45.529993) (xy 126.04115 45.529993) (xy 126.04115 47.116206) - (xy 126.051773 47.204665) (xy 126.107287 47.345439) (xy 126.107288 47.345441) (xy 126.107289 47.345442) - (xy 126.198728 47.466022) (xy 126.319308 47.557461) (xy 126.319309 47.557461) (xy 126.31931 47.557462) - (xy 126.389697 47.585219) (xy 126.460086 47.612977) (xy 126.548548 47.6236) (xy 126.54855 47.6236) - (xy 127.83475 47.6236) (xy 127.834752 47.6236) (xy 127.923214 47.612977) (xy 128.063992 47.557461) - (xy 128.184572 47.466022) (xy 128.276011 47.345442) (xy 128.331527 47.204664) (xy 128.334262 47.181882) - (xy 128.359971 47.126362) (xy 128.413406 47.096556) (xy 128.474155 47.10385) (xy 128.519014 47.145458) - (xy 128.520765 47.14874) (xy 128.537023 47.180648) (xy 128.537024 47.18065) (xy 128.661927 47.352564) - (xy 128.812185 47.502822) (xy 128.984097 47.627724) (xy 129.173434 47.724195) (xy 129.375527 47.789858) - (xy 129.441649 47.800331) (xy 129.44165 47.80033) (xy 129.44165 46.756112) (xy 129.498657 46.789025) - (xy 129.625824 46.8231) (xy 129.757476 46.8231) (xy 129.884643 46.789025) (xy 129.94165 46.756112) - (xy 129.94165 47.800331) (xy 130.007772 47.789858) (xy 130.209865 47.724195) (xy 130.399202 47.627724) - (xy 130.571114 47.502822) (xy 130.721372 47.352564) (xy 130.846274 47.180652) (xy 130.942745 46.991315) - (xy 131.008409 46.789221) (xy 131.04165 46.57935) (xy 131.04165 46.573101) (xy 131.041649 46.5731) - (xy 130.124662 46.5731) (xy 130.157575 46.516093) (xy 130.19165 46.388926) (xy 130.19165 46.257274) - (xy 130.157575 46.130107) (xy 130.124662 46.0731) (xy 131.041649 46.0731) (xy 131.04165 46.073099) - (xy 131.04165 46.066849) (xy 131.008409 45.856978) (xy 130.942745 45.654884) (xy 130.900506 45.571984) - (xy 130.87911 45.529993) (xy 134.64115 45.529993) (xy 134.64115 47.116206) (xy 134.651773 47.204665) - (xy 134.707287 47.345439) (xy 134.707288 47.345441) (xy 134.707289 47.345442) (xy 134.798728 47.466022) - (xy 134.919308 47.557461) (xy 134.919309 47.557461) (xy 134.91931 47.557462) (xy 134.989697 47.585219) - (xy 135.060086 47.612977) (xy 135.148548 47.6236) (xy 135.14855 47.6236) (xy 136.43475 47.6236) - (xy 136.434752 47.6236) (xy 136.523214 47.612977) (xy 136.663992 47.557461) (xy 136.784572 47.466022) - (xy 136.876011 47.345442) (xy 136.931527 47.204664) (xy 136.94215 47.116202) (xy 136.94215 46.08255) - (xy 137.14115 46.08255) (xy 137.14115 46.563649) (xy 137.169478 46.742506) (xy 137.225438 46.914737) - (xy 137.305341 47.071556) (xy 137.307654 47.076094) (xy 137.414097 47.222601) (xy 137.542149 47.350653) - (xy 137.688656 47.457096) (xy 137.850011 47.539311) (xy 138.022241 47.595271) (xy 138.069298 47.602724) - (xy 138.201101 47.6236) (xy 138.201104 47.6236) (xy 138.382199 47.6236) (xy 138.471627 47.609435) - (xy 138.561059 47.595271) (xy 138.733289 47.539311) (xy 138.894644 47.457096) (xy 139.041151 47.350653) - (xy 139.169203 47.222601) (xy 139.275646 47.076094) (xy 139.357861 46.914739) (xy 139.413821 46.742509) - (xy 139.439663 46.57935) (xy 139.44215 46.563649) (xy 139.44215 46.08255) (xy 139.430048 46.006141) - (xy 139.428623 45.997143) (xy 167.79425 45.997143) (xy 167.79425 46.155257) (xy 167.835173 46.307984) - (xy 167.91423 46.444916) (xy 168.026034 46.55672) (xy 168.162966 46.635777) (xy 168.315693 46.6767) - (xy 168.315695 46.6767) (xy 168.473805 46.6767) (xy 168.473807 46.6767) (xy 168.626534 46.635777) - (xy 168.763466 46.55672) (xy 168.87527 46.444916) (xy 168.954327 46.307984) (xy 168.977087 46.223043) - (xy 176.94475 46.223043) (xy 176.94475 46.381157) (xy 176.985673 46.533884) (xy 177.06473 46.670816) - (xy 177.176534 46.78262) (xy 177.313466 46.861677) (xy 177.466193 46.9026) (xy 177.466195 46.9026) - (xy 177.624305 46.9026) (xy 177.624307 46.9026) (xy 177.777034 46.861677) (xy 177.913966 46.78262) - (xy 178.02577 46.670816) (xy 178.104827 46.533884) (xy 178.14575 46.381157) (xy 178.14575 46.223043) - (xy 178.104827 46.070316) (xy 178.02577 45.933384) (xy 177.913966 45.82158) (xy 177.777034 45.742523) - (xy 177.624307 45.7016) (xy 177.466193 45.7016) (xy 177.313466 45.742523) (xy 177.176534 45.82158) - (xy 177.06473 45.933384) (xy 176.985673 46.070316) (xy 176.94475 46.223043) (xy 168.977087 46.223043) - (xy 168.99525 46.155257) (xy 168.99525 45.997143) (xy 168.954327 45.844416) (xy 168.87527 45.707484) - (xy 168.763466 45.59568) (xy 168.626534 45.516623) (xy 168.473807 45.4757) (xy 168.315693 45.4757) - (xy 168.162966 45.516623) (xy 168.026034 45.59568) (xy 167.91423 45.707484) (xy 167.835173 45.844416) - (xy 167.79425 45.997143) (xy 139.428623 45.997143) (xy 139.417781 45.928693) (xy 139.413821 45.903691) - (xy 139.357861 45.731461) (xy 139.275646 45.570106) (xy 139.169203 45.423599) (xy 139.041151 45.295547) - (xy 139.041147 45.295544) (xy 139.017914 45.278664) (xy 139.017913 45.278664) (xy 138.912132 45.20181) - (xy 209.34115 45.20181) (xy 209.34115 45.444389) (xy 209.372811 45.684881) (xy 209.372811 45.684886) + (xy 83.403547 45.799591) (xy 83.435364 45.918336) (xy 83.435594 45.919192) (xy 83.435598 45.919205) + (xy 83.528422 46.143304) (xy 83.528424 46.143308) (xy 83.528426 46.143312) (xy 83.649714 46.353389) + (xy 83.649716 46.353392) (xy 83.797379 46.545831) (xy 83.797381 46.545833) (xy 83.797385 46.545838) + (xy 83.968912 46.717365) (xy 83.968916 46.717368) (xy 83.968918 46.71737) (xy 84.071746 46.796272) + (xy 84.161361 46.865036) (xy 84.371438 46.986324) (xy 84.59555 47.079154) (xy 84.829861 47.141938) + (xy 85.070362 47.1736) (xy 85.070363 47.1736) (xy 85.312937 47.1736) (xy 85.312938 47.1736) (xy 85.553439 47.141938) + (xy 85.78775 47.079154) (xy 86.011862 46.986324) (xy 86.221939 46.865036) (xy 86.414388 46.717365) + (xy 86.585915 46.545838) (xy 86.733586 46.353389) (xy 86.785315 46.263791) (xy 94.13385 46.263791) + (xy 94.13385 46.382409) (xy 94.148395 46.436692) (xy 94.164552 46.49699) (xy 94.223857 46.599708) + (xy 94.223859 46.59971) (xy 94.223861 46.599713) (xy 94.307737 46.683589) (xy 94.307739 46.68359) + (xy 94.307741 46.683592) (xy 94.41046 46.742897) (xy 94.410461 46.742897) (xy 94.410464 46.742899) + (xy 94.525041 46.7736) (xy 94.525043 46.7736) (xy 94.643657 46.7736) (xy 94.643659 46.7736) (xy 94.758236 46.742899) + (xy 94.758238 46.742897) (xy 94.75824 46.742897) (xy 94.860958 46.683592) (xy 94.860958 46.683591) + (xy 94.860963 46.683589) (xy 94.944839 46.599713) (xy 94.946464 46.596899) (xy 95.004147 46.49699) + (xy 95.004147 46.496988) (xy 95.004149 46.496986) (xy 95.03485 46.382409) (xy 95.03485 46.263791) + (xy 95.004149 46.149214) (xy 95.004147 46.149211) (xy 95.004147 46.149209) (xy 94.944842 46.046491) + (xy 94.94484 46.046489) (xy 94.944839 46.046487) (xy 94.860963 45.962611) (xy 94.86096 45.962609) + (xy 94.860958 45.962607) (xy 94.758239 45.903302) (xy 94.75824 45.903302) (xy 94.721046 45.893336) + (xy 94.643659 45.8726) (xy 94.525041 45.8726) (xy 94.454917 45.891389) (xy 94.410459 45.903302) + (xy 94.307741 45.962607) (xy 94.223857 46.046491) (xy 94.164552 46.149209) (xy 94.164551 46.149214) + (xy 94.13385 46.263791) (xy 86.785315 46.263791) (xy 86.854874 46.143312) (xy 86.854878 46.143304) + (xy 86.89778 46.039728) (xy 86.947704 45.9192) (xy 87.010488 45.684889) (xy 87.026063 45.566582) + (xy 87.026064 45.566578) (xy 97.19115 45.566578) (xy 97.19115 47.079621) (xy 97.191151 47.079623) + (xy 97.206002 47.173399) (xy 97.206004 47.173404) (xy 97.2636 47.286442) (xy 97.353308 47.37615) + (xy 97.466346 47.433746) (xy 97.560131 47.4486) (xy 98.823168 47.448599) (xy 98.823171 47.448599) + (xy 98.823172 47.448598) (xy 98.870061 47.441172) (xy 98.916949 47.433747) (xy 98.916949 47.433746) + (xy 98.916954 47.433746) (xy 99.029992 47.37615) (xy 99.1197 47.286442) (xy 99.177296 47.173404) + (xy 99.19215 47.079619) (xy 99.192149 46.826862) (xy 99.211056 46.768675) (xy 99.260556 46.732711) + (xy 99.321741 46.73271) (xy 99.371241 46.768674) (xy 99.385304 46.796272) (xy 99.440554 46.966315) + (xy 99.537025 47.155652) (xy 99.661927 47.327564) (xy 99.812185 47.477822) (xy 99.984097 47.602724) + (xy 100.173434 47.699195) (xy 100.375527 47.764858) (xy 100.441649 47.775331) (xy 100.44165 47.77533) + (xy 100.44165 46.727245) (xy 100.508307 46.76573) (xy 100.629115 46.7981) (xy 100.754185 46.7981) + (xy 100.874993 46.76573) (xy 100.94165 46.727245) (xy 100.94165 47.775331) (xy 101.007772 47.764858) + (xy 101.209865 47.699195) (xy 101.399202 47.602724) (xy 101.571114 47.477822) (xy 101.721372 47.327564) + (xy 101.846274 47.155652) (xy 101.942745 46.966315) (xy 102.008409 46.764221) (xy 102.021876 46.679193) + (xy 102.049653 46.624677) (xy 102.10417 46.596899) (xy 102.164602 46.60647) (xy 102.207866 46.649735) + (xy 102.216755 46.675365) (xy 102.229599 46.739936) (xy 102.305017 46.922013) (xy 102.305018 46.922014) + (xy 102.414511 47.085882) (xy 102.553868 47.225239) (xy 102.717736 47.334732) (xy 102.899815 47.410151) + (xy 103.093109 47.4486) (xy 103.09311 47.4486) (xy 103.29019 47.4486) (xy 103.290191 47.4486) (xy 103.483485 47.410151) + (xy 103.665564 47.334732) (xy 103.829432 47.225239) (xy 103.968789 47.085882) (xy 104.078282 46.922014) + (xy 104.153701 46.739935) (xy 104.19215 46.546641) (xy 104.19215 46.099559) (xy 104.192149 46.099556) + (xy 104.69115 46.099556) (xy 104.69115 46.546643) (xy 104.714214 46.662589) (xy 104.726011 46.721899) + (xy 104.729599 46.739934) (xy 104.729599 46.739936) (xy 104.805017 46.922013) (xy 104.805018 46.922014) + (xy 104.914511 47.085882) (xy 105.053868 47.225239) (xy 105.217736 47.334732) (xy 105.399815 47.410151) + (xy 105.593109 47.4486) (xy 105.59311 47.4486) (xy 105.79019 47.4486) (xy 105.790191 47.4486) (xy 105.983485 47.410151) + (xy 106.165564 47.334732) (xy 106.329432 47.225239) (xy 106.468789 47.085882) (xy 106.578282 46.922014) + (xy 106.653701 46.739935) (xy 106.69215 46.546641) (xy 106.69215 46.099559) (xy 106.653701 45.906265) + (xy 106.578282 45.724186) (xy 106.468789 45.560318) (xy 106.366743 45.458272) (xy 110.19115 45.458272) + (xy 110.19115 47.187927) (xy 110.199882 47.23182) (xy 110.199883 47.231822) (xy 110.233146 47.281604) + (xy 110.282928 47.314867) (xy 110.293977 47.317064) (xy 110.326822 47.323599) (xy 110.326828 47.323599) + (xy 110.32683 47.3236) (xy 110.326831 47.3236) (xy 112.056469 47.3236) (xy 112.05647 47.3236) (xy 112.056471 47.323599) + (xy 112.056477 47.323599) (xy 112.078273 47.319262) (xy 112.100372 47.314867) (xy 112.150154 47.281604) + (xy 112.183417 47.231822) (xy 112.19215 47.18792) (xy 112.19215 45.566578) (xy 115.19115 45.566578) + (xy 115.19115 47.079621) (xy 115.191151 47.079623) (xy 115.206002 47.173399) (xy 115.206004 47.173404) + (xy 115.2636 47.286442) (xy 115.353308 47.37615) (xy 115.466346 47.433746) (xy 115.560131 47.4486) + (xy 116.823168 47.448599) (xy 116.823171 47.448599) (xy 116.823172 47.448598) (xy 116.870061 47.441172) + (xy 116.916949 47.433747) (xy 116.916949 47.433746) (xy 116.916954 47.433746) (xy 117.029992 47.37615) + (xy 117.1197 47.286442) (xy 117.177296 47.173404) (xy 117.19215 47.079619) (xy 117.192149 46.099556) + (xy 117.69115 46.099556) (xy 117.69115 46.546643) (xy 117.714214 46.662589) (xy 117.726011 46.721899) + (xy 117.729599 46.739934) (xy 117.729599 46.739936) (xy 117.805017 46.922013) (xy 117.805018 46.922014) + (xy 117.914511 47.085882) (xy 118.053868 47.225239) (xy 118.217736 47.334732) (xy 118.399815 47.410151) + (xy 118.593109 47.4486) (xy 118.59311 47.4486) (xy 118.79019 47.4486) (xy 118.790191 47.4486) (xy 118.983485 47.410151) + (xy 119.165564 47.334732) (xy 119.329432 47.225239) (xy 119.468789 47.085882) (xy 119.578282 46.922014) + (xy 119.653701 46.739935) (xy 119.666544 46.675365) (xy 119.69644 46.621982) (xy 119.752005 46.596366) + (xy 119.812015 46.608303) (xy 119.853548 46.653232) (xy 119.861423 46.679192) (xy 119.874891 46.764222) + (xy 119.940554 46.966315) (xy 120.037025 47.155652) (xy 120.161927 47.327564) (xy 120.312185 47.477822) + (xy 120.484097 47.602724) (xy 120.673434 47.699195) (xy 120.875527 47.764858) (xy 120.941649 47.775331) + (xy 120.94165 47.77533) (xy 120.94165 46.727245) (xy 121.008307 46.76573) (xy 121.129115 46.7981) + (xy 121.254185 46.7981) (xy 121.374993 46.76573) (xy 121.44165 46.727245) (xy 121.44165 47.775331) + (xy 121.507772 47.764858) (xy 121.709865 47.699195) (xy 121.899202 47.602724) (xy 122.071114 47.477822) + (xy 122.221372 47.327564) (xy 122.346274 47.155652) (xy 122.442745 46.966315) (xy 122.508409 46.764221) + (xy 122.53868 46.5731) (xy 121.595796 46.5731) (xy 121.63428 46.506443) (xy 121.66665 46.385635) + (xy 121.66665 46.260565) (xy 121.63428 46.139757) (xy 121.595796 46.0731) (xy 122.53868 46.0731) + (xy 122.53868 46.073099) (xy 122.508409 45.881978) (xy 122.442745 45.679884) (xy 122.393195 45.582636) + (xy 122.372275 45.541578) (xy 126.19115 45.541578) (xy 126.19115 47.104621) (xy 126.191151 47.104623) + (xy 126.206002 47.198399) (xy 126.206004 47.198404) (xy 126.2636 47.311442) (xy 126.353308 47.40115) + (xy 126.466346 47.458746) (xy 126.560131 47.4736) (xy 127.823168 47.473599) (xy 127.823171 47.473599) + (xy 127.823172 47.473598) (xy 127.870061 47.466172) (xy 127.916949 47.458747) (xy 127.916949 47.458746) + (xy 127.916954 47.458746) (xy 128.029992 47.40115) (xy 128.1197 47.311442) (xy 128.177296 47.198404) + (xy 128.19215 47.104619) (xy 128.192149 46.851863) (xy 128.211056 46.793676) (xy 128.260556 46.757712) + (xy 128.321741 46.757711) (xy 128.371241 46.793675) (xy 128.385304 46.821273) (xy 128.440554 46.991315) + (xy 128.537025 47.180652) (xy 128.661927 47.352564) (xy 128.812185 47.502822) (xy 128.984097 47.627724) + (xy 129.173434 47.724195) (xy 129.375527 47.789858) (xy 129.441649 47.800331) (xy 129.44165 47.80033) + (xy 129.44165 46.756112) (xy 129.498657 46.789025) (xy 129.625824 46.8231) (xy 129.757476 46.8231) + (xy 129.884643 46.789025) (xy 129.94165 46.756112) (xy 129.94165 47.800331) (xy 130.007772 47.789858) + (xy 130.209865 47.724195) (xy 130.399202 47.627724) (xy 130.571114 47.502822) (xy 130.721372 47.352564) + (xy 130.846274 47.180652) (xy 130.942745 46.991315) (xy 131.008409 46.789221) (xy 131.04165 46.57935) + (xy 131.04165 46.573101) (xy 131.041649 46.5731) (xy 130.124662 46.5731) (xy 130.157575 46.516093) + (xy 130.19165 46.388926) (xy 130.19165 46.257274) (xy 130.157575 46.130107) (xy 130.124662 46.0731) + (xy 131.041649 46.0731) (xy 131.04165 46.073099) (xy 131.04165 46.066849) (xy 131.008409 45.856978) + (xy 130.942745 45.654884) (xy 130.905933 45.582636) (xy 130.885013 45.541578) (xy 134.79115 45.541578) + (xy 134.79115 47.104621) (xy 134.791151 47.104623) (xy 134.806002 47.198399) (xy 134.806004 47.198404) + (xy 134.8636 47.311442) (xy 134.953308 47.40115) (xy 135.066346 47.458746) (xy 135.160131 47.4736) + (xy 136.423168 47.473599) (xy 136.423171 47.473599) (xy 136.423172 47.473598) (xy 136.470061 47.466172) + (xy 136.516949 47.458747) (xy 136.516949 47.458746) (xy 136.516954 47.458746) (xy 136.629992 47.40115) + (xy 136.7197 47.311442) (xy 136.777296 47.198404) (xy 136.79215 47.104619) (xy 136.792149 46.074556) + (xy 137.29115 46.074556) (xy 137.29115 46.571643) (xy 137.309241 46.662589) (xy 137.327145 46.7526) + (xy 137.329599 46.764934) (xy 137.329599 46.764936) (xy 137.405017 46.947013) (xy 137.431284 46.986324) + (xy 137.514511 47.110882) (xy 137.653868 47.250239) (xy 137.817736 47.359732) (xy 137.999815 47.435151) + (xy 138.193109 47.4736) (xy 138.19311 47.4736) (xy 138.39019 47.4736) (xy 138.390191 47.4736) (xy 138.583485 47.435151) + (xy 138.765564 47.359732) (xy 138.929432 47.250239) (xy 139.068789 47.110882) (xy 139.178282 46.947014) + (xy 139.253701 46.764935) (xy 139.29215 46.571641) (xy 139.29215 46.074559) (xy 139.280679 46.016891) + (xy 167.94425 46.016891) (xy 167.94425 46.135509) (xy 167.971324 46.236551) (xy 167.974952 46.25009) + (xy 168.034257 46.352808) (xy 168.034259 46.35281) (xy 168.034261 46.352813) (xy 168.118137 46.436689) + (xy 168.118139 46.43669) (xy 168.118141 46.436692) (xy 168.22086 46.495997) (xy 168.220861 46.495997) + (xy 168.220864 46.495999) (xy 168.335441 46.5267) (xy 168.335443 46.5267) (xy 168.454057 46.5267) + (xy 168.454059 46.5267) (xy 168.568636 46.495999) (xy 168.568638 46.495997) (xy 168.56864 46.495997) + (xy 168.671358 46.436692) (xy 168.671358 46.436691) (xy 168.671363 46.436689) (xy 168.755239 46.352813) + (xy 168.814549 46.250086) (xy 168.816504 46.242791) (xy 177.09475 46.242791) (xy 177.09475 46.361409) + (xy 177.114921 46.436689) (xy 177.125452 46.47599) (xy 177.184757 46.578708) (xy 177.184759 46.57871) + (xy 177.184761 46.578713) (xy 177.268637 46.662589) (xy 177.268639 46.66259) (xy 177.268641 46.662592) + (xy 177.37136 46.721897) (xy 177.371361 46.721897) (xy 177.371364 46.721899) (xy 177.485941 46.7526) + (xy 177.485943 46.7526) (xy 177.604557 46.7526) (xy 177.604559 46.7526) (xy 177.719136 46.721899) + (xy 177.719138 46.721897) (xy 177.71914 46.721897) (xy 177.821858 46.662592) (xy 177.821858 46.662591) + (xy 177.821863 46.662589) (xy 177.905739 46.578713) (xy 177.941893 46.516093) (xy 177.965047 46.47599) + (xy 177.965047 46.475988) (xy 177.965049 46.475986) (xy 177.99575 46.361409) (xy 177.99575 46.242791) + (xy 177.965049 46.128214) (xy 177.965047 46.128211) (xy 177.965047 46.128209) (xy 177.905742 46.025491) + (xy 177.90574 46.025489) (xy 177.905739 46.025487) (xy 177.821863 45.941611) (xy 177.82186 45.941609) + (xy 177.821858 45.941607) (xy 177.719139 45.882302) (xy 177.71914 45.882302) (xy 177.689757 45.874429) + (xy 177.604559 45.8516) (xy 177.485941 45.8516) (xy 177.415817 45.870389) (xy 177.371359 45.882302) + (xy 177.268641 45.941607) (xy 177.184757 46.025491) (xy 177.125452 46.128209) (xy 177.121405 46.143312) + (xy 177.09475 46.242791) (xy 168.816504 46.242791) (xy 168.84525 46.135509) (xy 168.84525 46.016891) + (xy 168.814549 45.902314) (xy 168.814547 45.902311) (xy 168.814547 45.902309) (xy 168.755242 45.799591) + (xy 168.75524 45.799589) (xy 168.755239 45.799587) (xy 168.671363 45.715711) (xy 168.67136 45.715709) + (xy 168.671358 45.715707) (xy 168.568639 45.656402) (xy 168.56864 45.656402) (xy 168.555101 45.652774) + (xy 168.454059 45.6257) (xy 168.335441 45.6257) (xy 168.265317 45.644489) (xy 168.220859 45.656402) + (xy 168.118141 45.715707) (xy 168.034257 45.799591) (xy 167.974952 45.902309) (xy 167.970426 45.9192) + (xy 167.94425 46.016891) (xy 139.280679 46.016891) (xy 139.253701 45.881265) (xy 139.178282 45.699186) + (xy 139.068789 45.535318) (xy 138.929432 45.395961) (xy 138.802978 45.311467) (xy 138.765563 45.286467) + (xy 138.583485 45.211049) (xy 138.537038 45.20181) (xy 209.34115 45.20181) (xy 209.34115 45.444389) + (xy 209.372811 45.684881) (xy 209.372811 45.684886) (xy 209.403547 45.799591) (xy 209.435364 45.918336) (xy 209.435594 45.919192) (xy 209.435598 45.919205) (xy 209.528422 46.143304) (xy 209.528424 46.143308) (xy 209.528426 46.143312) (xy 209.649714 46.353389) (xy 209.649716 46.353392) (xy 209.797379 46.545831) (xy 209.797381 46.545833) (xy 209.797385 46.545838) (xy 209.968912 46.717365) (xy 209.968916 46.717368) - (xy 209.968918 46.71737) (xy 210.081322 46.80362) (xy 210.161361 46.865036) (xy 210.371438 46.986324) + (xy 209.968918 46.71737) (xy 210.071746 46.796272) (xy 210.161361 46.865036) (xy 210.371438 46.986324) (xy 210.59555 47.079154) (xy 210.829861 47.141938) (xy 211.070362 47.1736) (xy 211.070363 47.1736) (xy 211.312937 47.1736) (xy 211.312938 47.1736) (xy 211.553439 47.141938) (xy 211.78775 47.079154) (xy 212.011862 46.986324) (xy 212.221939 46.865036) (xy 212.414388 46.717365) (xy 212.585915 46.545838) @@ -50267,89 +58550,87 @@ (xy 210.595544 43.567048) (xy 210.371445 43.659872) (xy 210.161357 43.781166) (xy 209.968918 43.928829) (xy 209.797379 44.100368) (xy 209.649716 44.292807) (xy 209.528422 44.502895) (xy 209.435598 44.726994) (xy 209.435594 44.727007) (xy 209.372811 44.961313) (xy 209.372811 44.961318) (xy 209.34115 45.20181) - (xy 138.912132 45.20181) (xy 138.894644 45.189104) (xy 138.894643 45.189103) (xy 138.894641 45.189102) - (xy 138.733287 45.106888) (xy 138.561056 45.050928) (xy 138.382199 45.0226) (xy 138.382196 45.0226) - (xy 138.201104 45.0226) (xy 138.201101 45.0226) (xy 138.022243 45.050928) (xy 137.850012 45.106888) - (xy 137.688658 45.189102) (xy 137.615402 45.242325) (xy 137.542149 45.295547) (xy 137.414097 45.423599) - (xy 137.376244 45.4757) (xy 137.307652 45.570108) (xy 137.225438 45.731462) (xy 137.169478 45.903693) - (xy 137.14115 46.08255) (xy 136.94215 46.08255) (xy 136.94215 45.529998) (xy 136.931527 45.441536) - (xy 136.876011 45.300758) (xy 136.784572 45.180178) (xy 136.663992 45.088739) (xy 136.663991 45.088738) - (xy 136.663989 45.088737) (xy 136.523215 45.033223) (xy 136.434756 45.0226) (xy 136.434752 45.0226) - (xy 135.148548 45.0226) (xy 135.148543 45.0226) (xy 135.060084 45.033223) (xy 134.91931 45.088737) - (xy 134.919306 45.08874) (xy 134.798731 45.180175) (xy 134.798725 45.180181) (xy 134.70729 45.300756) - (xy 134.707287 45.30076) (xy 134.651773 45.441534) (xy 134.64115 45.529993) (xy 130.87911 45.529993) - (xy 130.846274 45.465548) (xy 130.721372 45.293635) (xy 130.571114 45.143377) (xy 130.399202 45.018475) - (xy 130.209865 44.922004) (xy 130.00777 44.85634) (xy 129.94165 44.845867) (xy 129.94165 45.890088) - (xy 129.884643 45.857175) (xy 129.757476 45.8231) (xy 129.625824 45.8231) (xy 129.498657 45.857175) - (xy 129.44165 45.890088) (xy 129.44165 44.845868) (xy 129.441649 44.845867) (xy 129.37553 44.85634) - (xy 129.375528 44.85634) (xy 129.173434 44.922004) (xy 128.984097 45.018475) (xy 128.812185 45.143377) - (xy 128.661927 45.293635) (xy 128.537025 45.465548) (xy 128.520765 45.49746) (xy 128.477499 45.540724) - (xy 128.417067 45.550294) (xy 128.362551 45.522515) (xy 128.334775 45.467998) (xy 128.334262 45.464315) - (xy 128.332375 45.448599) (xy 128.331527 45.441536) (xy 128.276011 45.300758) (xy 128.184572 45.180178) - (xy 128.063992 45.088739) (xy 128.063991 45.088738) (xy 128.063989 45.088737) (xy 127.923215 45.033223) - (xy 127.834756 45.0226) (xy 127.834752 45.0226) (xy 126.548548 45.0226) (xy 126.548543 45.0226) - (xy 126.460084 45.033223) (xy 126.31931 45.088737) (xy 126.319306 45.08874) (xy 126.198731 45.180175) - (xy 126.198725 45.180181) (xy 126.10729 45.300756) (xy 126.107287 45.30076) (xy 126.051773 45.441534) - (xy 126.04115 45.529993) (xy 122.366372 45.529993) (xy 122.346274 45.490548) (xy 122.221372 45.318635) + (xy 138.537038 45.20181) (xy 138.390193 45.1726) (xy 138.390191 45.1726) (xy 138.193109 45.1726) + (xy 138.193106 45.1726) (xy 137.999815 45.211049) (xy 137.999813 45.211049) (xy 137.817736 45.286467) + (xy 137.653868 45.395961) (xy 137.653864 45.395964) (xy 137.514514 45.535314) (xy 137.514511 45.535318) + (xy 137.405017 45.699186) (xy 137.329599 45.881263) (xy 137.329599 45.881265) (xy 137.29115 46.074556) + (xy 136.792149 46.074556) (xy 136.792149 45.541582) (xy 136.792149 45.541581) (xy 136.792149 45.541578) + (xy 136.792148 45.541576) (xy 136.777297 45.4478) (xy 136.777296 45.447798) (xy 136.777296 45.447796) + (xy 136.7197 45.334758) (xy 136.629992 45.24505) (xy 136.516954 45.187454) (xy 136.516955 45.187454) + (xy 136.423171 45.1726) (xy 135.160128 45.1726) (xy 135.160126 45.172601) (xy 135.06635 45.187452) + (xy 135.066345 45.187454) (xy 134.953309 45.245049) (xy 134.863599 45.334759) (xy 134.806004 45.447795) + (xy 134.79115 45.541578) (xy 130.885013 45.541578) (xy 130.846274 45.465547) (xy 130.721372 45.293635) + (xy 130.571114 45.143377) (xy 130.399202 45.018475) (xy 130.209865 44.922004) (xy 130.00777 44.85634) + (xy 129.94165 44.845867) (xy 129.94165 45.890088) (xy 129.884643 45.857175) (xy 129.757476 45.8231) + (xy 129.625824 45.8231) (xy 129.498657 45.857175) (xy 129.44165 45.890088) (xy 129.44165 44.845868) + (xy 129.441649 44.845867) (xy 129.37553 44.85634) (xy 129.375528 44.85634) (xy 129.173434 44.922004) + (xy 128.984097 45.018475) (xy 128.812185 45.143377) (xy 128.661927 45.293635) (xy 128.537025 45.465547) + (xy 128.440554 45.654884) (xy 128.385304 45.824929) (xy 128.34934 45.874429) (xy 128.291149 45.893336) + (xy 128.232958 45.874429) (xy 128.196994 45.824929) (xy 128.192149 45.794336) (xy 128.192149 45.541578) + (xy 128.192148 45.541576) (xy 128.177297 45.4478) (xy 128.177296 45.447798) (xy 128.177296 45.447796) + (xy 128.1197 45.334758) (xy 128.029992 45.24505) (xy 127.916954 45.187454) (xy 127.916955 45.187454) + (xy 127.823171 45.1726) (xy 126.560128 45.1726) (xy 126.560126 45.172601) (xy 126.46635 45.187452) + (xy 126.466345 45.187454) (xy 126.353309 45.245049) (xy 126.263599 45.334759) (xy 126.206004 45.447795) + (xy 126.19115 45.541578) (xy 122.372275 45.541578) (xy 122.346274 45.490547) (xy 122.221372 45.318635) (xy 122.071114 45.168377) (xy 121.899202 45.043475) (xy 121.709865 44.947004) (xy 121.50777 44.88134) (xy 121.44165 44.870867) (xy 121.44165 45.918954) (xy 121.374993 45.88047) (xy 121.254185 45.8481) (xy 121.129115 45.8481) (xy 121.008307 45.88047) (xy 120.94165 45.918954) (xy 120.94165 44.870868) (xy 120.941649 44.870867) (xy 120.87553 44.88134) (xy 120.875528 44.88134) (xy 120.673434 44.947004) (xy 120.484097 45.043475) (xy 120.312185 45.168377) (xy 120.161927 45.318635) (xy 120.037025 45.490547) - (xy 119.940552 45.679888) (xy 119.92808 45.718274) (xy 119.892116 45.767773) (xy 119.833925 45.78668) - (xy 119.775734 45.767772) (xy 119.745716 45.732625) (xy 119.675647 45.595108) (xy 119.675646 45.595106) - (xy 119.569203 45.448599) (xy 119.441151 45.320547) (xy 119.294644 45.214104) (xy 119.294643 45.214103) - (xy 119.294641 45.214102) (xy 119.133287 45.131888) (xy 118.961056 45.075928) (xy 118.782199 45.0476) - (xy 118.782196 45.0476) (xy 118.601104 45.0476) (xy 118.601101 45.0476) (xy 118.422243 45.075928) - (xy 118.250012 45.131888) (xy 118.088658 45.214102) (xy 118.07931 45.220894) (xy 117.942149 45.320547) - (xy 117.814097 45.448599) (xy 117.778598 45.49746) (xy 117.707652 45.595108) (xy 117.625438 45.756462) - (xy 117.569478 45.928693) (xy 117.54115 46.10755) (xy 117.34215 46.10755) (xy 117.34215 45.554998) - (xy 117.331527 45.466536) (xy 117.276011 45.325758) (xy 117.184572 45.205178) (xy 117.063992 45.113739) - (xy 117.063991 45.113738) (xy 117.063989 45.113737) (xy 116.923215 45.058223) (xy 116.834756 45.0476) - (xy 116.834752 45.0476) (xy 115.548548 45.0476) (xy 115.548543 45.0476) (xy 115.460084 45.058223) - (xy 115.31931 45.113737) (xy 115.319306 45.11374) (xy 115.198731 45.205175) (xy 115.198725 45.205181) - (xy 115.10729 45.325756) (xy 115.107287 45.32576) (xy 115.051773 45.466534) (xy 115.04115 45.554993) - (xy 112.342149 45.554993) (xy 112.342149 45.428236) (xy 112.339235 45.403109) (xy 112.293856 45.300335) - (xy 112.214415 45.220894) (xy 112.111641 45.175515) (xy 112.11164 45.175514) (xy 112.111638 45.175514) - (xy 112.086518 45.1726) (xy 110.296789 45.1726) (xy 110.296786 45.172601) (xy 110.271659 45.175514) - (xy 110.168885 45.220894) (xy 110.089444 45.300335) (xy 110.044064 45.403111) (xy 110.04115 45.42823) - (xy 106.548834 45.42823) (xy 106.441151 45.320547) (xy 106.294644 45.214104) (xy 106.294643 45.214103) - (xy 106.294641 45.214102) (xy 106.133287 45.131888) (xy 105.961056 45.075928) (xy 105.782199 45.0476) - (xy 105.782196 45.0476) (xy 105.601104 45.0476) (xy 105.601101 45.0476) (xy 105.422243 45.075928) - (xy 105.250012 45.131888) (xy 105.088658 45.214102) (xy 105.07931 45.220894) (xy 104.942149 45.320547) - (xy 104.814097 45.448599) (xy 104.778598 45.49746) (xy 104.707652 45.595108) (xy 104.625438 45.756462) - (xy 104.569478 45.928693) (xy 104.54115 46.10755) (xy 104.34215 46.10755) (xy 104.313821 45.928693) - (xy 104.313821 45.928691) (xy 104.257861 45.756461) (xy 104.175646 45.595106) (xy 104.069203 45.448599) - (xy 103.941151 45.320547) (xy 103.794644 45.214104) (xy 103.794643 45.214103) (xy 103.794641 45.214102) - (xy 103.633287 45.131888) (xy 103.461056 45.075928) (xy 103.282199 45.0476) (xy 103.282196 45.0476) - (xy 103.101104 45.0476) (xy 103.101101 45.0476) (xy 102.922243 45.075928) (xy 102.750012 45.131888) - (xy 102.588658 45.214102) (xy 102.57931 45.220894) (xy 102.442149 45.320547) (xy 102.314097 45.448599) - (xy 102.278598 45.49746) (xy 102.207651 45.595109) (xy 102.20765 45.595111) (xy 102.137582 45.732626) - (xy 102.094317 45.77589) (xy 102.033885 45.785461) (xy 101.979369 45.757683) (xy 101.955218 45.718272) - (xy 101.942746 45.679886) (xy 101.846274 45.490547) (xy 101.721372 45.318635) (xy 101.571114 45.168377) - (xy 101.399202 45.043475) (xy 101.209865 44.947004) (xy 101.00777 44.88134) (xy 100.94165 44.870867) - (xy 100.94165 45.918954) (xy 100.874993 45.88047) (xy 100.754185 45.8481) (xy 100.629115 45.8481) - (xy 100.508307 45.88047) (xy 100.44165 45.918954) (xy 100.44165 44.870868) (xy 100.441649 44.870867) - (xy 100.37553 44.88134) (xy 100.375528 44.88134) (xy 100.173434 44.947004) (xy 99.984097 45.043475) - (xy 99.812185 45.168377) (xy 99.661927 45.318635) (xy 99.537025 45.490548) (xy 99.520765 45.52246) - (xy 99.477499 45.565724) (xy 99.417067 45.575294) (xy 99.362551 45.547515) (xy 99.334775 45.492998) - (xy 99.334262 45.489315) (xy 99.332627 45.4757) (xy 99.331527 45.466536) (xy 99.276011 45.325758) - (xy 99.184572 45.205178) (xy 99.063992 45.113739) (xy 99.063991 45.113738) (xy 99.063989 45.113737) - (xy 98.923215 45.058223) (xy 98.834756 45.0476) (xy 98.834752 45.0476) (xy 97.548548 45.0476) (xy 97.548543 45.0476) - (xy 97.460084 45.058223) (xy 97.31931 45.113737) (xy 97.319306 45.11374) (xy 97.198731 45.205175) - (xy 97.198725 45.205181) (xy 97.10729 45.325756) (xy 97.107287 45.32576) (xy 97.051773 45.466534) - (xy 97.04115 45.554993) (xy 87.027589 45.554993) (xy 87.04215 45.444388) (xy 87.04215 45.201812) - (xy 87.010488 44.961311) (xy 86.947704 44.727) (xy 86.854874 44.502888) (xy 86.733586 44.292811) - (xy 86.585915 44.100362) (xy 86.414388 43.928835) (xy 86.414383 43.928831) (xy 86.414381 43.928829) - (xy 86.221942 43.781166) (xy 86.221939 43.781164) (xy 86.011862 43.659876) (xy 86.011858 43.659874) - (xy 86.011854 43.659872) (xy 85.787755 43.567048) (xy 85.787754 43.567047) (xy 85.78775 43.567046) - (xy 85.553439 43.504262) (xy 85.553436 43.504261) (xy 85.553434 43.504261) (xy 85.312939 43.4726) - (xy 85.312938 43.4726) (xy 85.070362 43.4726) (xy 85.07036 43.4726) (xy 84.829868 43.504261) (xy 84.829863 43.504261) - (xy 84.595557 43.567044) (xy 84.595544 43.567048) (xy 84.371445 43.659872) (xy 84.161357 43.781166) - (xy 83.968918 43.928829) (xy 83.797379 44.100368) (xy 83.649716 44.292807) (xy 83.528422 44.502895) - (xy 83.435598 44.726994) (xy 83.435594 44.727007) (xy 83.372811 44.961313) (xy 83.372811 44.961318) - (xy 83.34115 45.20181) (xy 80.766349 45.20181) (xy 80.762023 40.922698) (xy 80.780872 40.86449) - (xy 80.830335 40.828476) (xy 80.861023 40.8236) (xy 214.59215 40.8236) + (xy 119.940554 45.679884) (xy 119.874891 45.881977) (xy 119.861423 45.967007) (xy 119.833645 46.021523) + (xy 119.779128 46.0493) (xy 119.718696 46.039728) (xy 119.675432 45.996463) (xy 119.666545 45.970836) + (xy 119.653701 45.906265) (xy 119.578282 45.724186) (xy 119.468789 45.560318) (xy 119.329432 45.420961) + (xy 119.219938 45.347799) (xy 119.165563 45.311467) (xy 118.983485 45.236049) (xy 118.790193 45.1976) + (xy 118.790191 45.1976) (xy 118.593109 45.1976) (xy 118.593106 45.1976) (xy 118.399815 45.236049) + (xy 118.399813 45.236049) (xy 118.217736 45.311467) (xy 118.053868 45.420961) (xy 118.053864 45.420964) + (xy 117.914514 45.560314) (xy 117.914511 45.560318) (xy 117.805017 45.724186) (xy 117.729599 45.906263) + (xy 117.729599 45.906265) (xy 117.69115 46.099556) (xy 117.192149 46.099556) (xy 117.192149 45.566582) + (xy 117.192149 45.566581) (xy 117.192149 45.566578) (xy 117.192148 45.566576) (xy 117.177297 45.4728) + (xy 117.177296 45.472798) (xy 117.177296 45.472796) (xy 117.1197 45.359758) (xy 117.029992 45.27005) + (xy 116.916954 45.212454) (xy 116.916955 45.212454) (xy 116.823171 45.1976) (xy 115.560128 45.1976) + (xy 115.560126 45.197601) (xy 115.46635 45.212452) (xy 115.466345 45.212454) (xy 115.353309 45.270049) + (xy 115.263599 45.359759) (xy 115.206004 45.472795) (xy 115.19115 45.566578) (xy 112.19215 45.566578) + (xy 112.19215 45.45828) (xy 112.192149 45.458278) (xy 112.192149 45.458272) (xy 112.183417 45.414379) + (xy 112.183415 45.414375) (xy 112.150155 45.364598) (xy 112.150154 45.364596) (xy 112.142913 45.359758) + (xy 112.100374 45.331334) (xy 112.10037 45.331332) (xy 112.056477 45.3226) (xy 112.05647 45.3226) + (xy 110.32683 45.3226) (xy 110.326822 45.3226) (xy 110.282929 45.331332) (xy 110.282925 45.331334) + (xy 110.233148 45.364594) (xy 110.233144 45.364598) (xy 110.199884 45.414375) (xy 110.199882 45.414379) + (xy 110.19115 45.458272) (xy 106.366743 45.458272) (xy 106.329432 45.420961) (xy 106.219938 45.347799) + (xy 106.165563 45.311467) (xy 105.983485 45.236049) (xy 105.790193 45.1976) (xy 105.790191 45.1976) + (xy 105.593109 45.1976) (xy 105.593106 45.1976) (xy 105.399815 45.236049) (xy 105.399813 45.236049) + (xy 105.217736 45.311467) (xy 105.053868 45.420961) (xy 105.053864 45.420964) (xy 104.914514 45.560314) + (xy 104.914511 45.560318) (xy 104.805017 45.724186) (xy 104.729599 45.906263) (xy 104.729599 45.906265) + (xy 104.69115 46.099556) (xy 104.192149 46.099556) (xy 104.153701 45.906265) (xy 104.078282 45.724186) + (xy 103.968789 45.560318) (xy 103.829432 45.420961) (xy 103.719938 45.347799) (xy 103.665563 45.311467) + (xy 103.483485 45.236049) (xy 103.290193 45.1976) (xy 103.290191 45.1976) (xy 103.093109 45.1976) + (xy 103.093106 45.1976) (xy 102.899815 45.236049) (xy 102.899813 45.236049) (xy 102.717736 45.311467) + (xy 102.553868 45.420961) (xy 102.553864 45.420964) (xy 102.414514 45.560314) (xy 102.414511 45.560318) + (xy 102.305017 45.724186) (xy 102.229599 45.906263) (xy 102.216755 45.970834) (xy 102.186857 46.024218) + (xy 102.131292 46.049833) (xy 102.071283 46.037896) (xy 102.02975 45.992965) (xy 102.021876 45.967006) + (xy 102.008409 45.881978) (xy 101.942745 45.679884) (xy 101.846274 45.490547) (xy 101.721372 45.318635) + (xy 101.571114 45.168377) (xy 101.399202 45.043475) (xy 101.209865 44.947004) (xy 101.00777 44.88134) + (xy 100.94165 44.870867) (xy 100.94165 45.918954) (xy 100.874993 45.88047) (xy 100.754185 45.8481) + (xy 100.629115 45.8481) (xy 100.508307 45.88047) (xy 100.44165 45.918954) (xy 100.44165 44.870868) + (xy 100.441649 44.870867) (xy 100.37553 44.88134) (xy 100.375528 44.88134) (xy 100.173434 44.947004) + (xy 99.984097 45.043475) (xy 99.812185 45.168377) (xy 99.661927 45.318635) (xy 99.537025 45.490547) + (xy 99.440554 45.679884) (xy 99.385304 45.849929) (xy 99.34934 45.899429) (xy 99.291149 45.918336) + (xy 99.232958 45.899429) (xy 99.196994 45.849929) (xy 99.192149 45.819336) (xy 99.192149 45.566578) + (xy 99.192148 45.566576) (xy 99.177297 45.4728) (xy 99.177296 45.472798) (xy 99.177296 45.472796) + (xy 99.1197 45.359758) (xy 99.029992 45.27005) (xy 98.916954 45.212454) (xy 98.916955 45.212454) + (xy 98.823171 45.1976) (xy 97.560128 45.1976) (xy 97.560126 45.197601) (xy 97.46635 45.212452) (xy 97.466345 45.212454) + (xy 97.353309 45.270049) (xy 97.263599 45.359759) (xy 97.206004 45.472795) (xy 97.19115 45.566578) + (xy 87.026064 45.566578) (xy 87.028277 45.549769) (xy 87.028277 45.549768) (xy 87.036073 45.490547) + (xy 87.04215 45.444388) (xy 87.04215 45.201812) (xy 87.010488 44.961311) (xy 86.947704 44.727) (xy 86.854874 44.502888) + (xy 86.733586 44.292811) (xy 86.585915 44.100362) (xy 86.414388 43.928835) (xy 86.414383 43.928831) + (xy 86.414381 43.928829) (xy 86.221942 43.781166) (xy 86.221939 43.781164) (xy 86.011862 43.659876) + (xy 86.011858 43.659874) (xy 86.011854 43.659872) (xy 85.787755 43.567048) (xy 85.787754 43.567047) + (xy 85.78775 43.567046) (xy 85.553439 43.504262) (xy 85.553436 43.504261) (xy 85.553434 43.504261) + (xy 85.312939 43.4726) (xy 85.312938 43.4726) (xy 85.070362 43.4726) (xy 85.07036 43.4726) (xy 84.829868 43.504261) + (xy 84.829863 43.504261) (xy 84.595557 43.567044) (xy 84.595544 43.567048) (xy 84.371445 43.659872) + (xy 84.161357 43.781166) (xy 83.968918 43.928829) (xy 83.797379 44.100368) (xy 83.649716 44.292807) + (xy 83.528422 44.502895) (xy 83.435598 44.726994) (xy 83.435594 44.727007) (xy 83.372811 44.961313) + (xy 83.372811 44.961318) (xy 83.34115 45.20181) (xy 80.766348 45.20181) (xy 80.762023 40.922698) + (xy 80.780872 40.86449) (xy 80.830335 40.828476) (xy 80.861023 40.8236) (xy 214.59215 40.8236) ) ) ) diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro index ee517d5..b9a80c1 100644 --- a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro @@ -162,7 +162,7 @@ "min_track_width": 0.2, "min_via_annular_width": 0.1, "min_via_diameter": 0.5, - "solder_mask_to_copper_clearance": 0.0, + "solder_mask_to_copper_clearance": 0.005, "use_height_for_length_calcs": true }, "teardrop_options": [ @@ -213,7 +213,8 @@ 0.0, 0.01, 0.15, - 0.25 + 0.25, + 1.0 ], "tuning_pattern_settings": { "diff_pair_defaults": { @@ -253,7 +254,7 @@ ], "zones_allow_external_fillets": false }, - "filename": "hbox-watchdog-v3.kicad_pcb", + "filename": "hbox-watchdog-v3-PROD.kicad_pcb", "ipc2581": { "bom_rev": "", "dist": "", @@ -645,7 +646,7 @@ "idf": "", "netlist": "./", "plot": "", - "specctra_dsn": "", + "specctra_dsn": "hbox-watchdog-v3-PROD-usb.dsn", "vrml": "" }, "page_layout_descr_file": "" @@ -763,12 +764,12 @@ "subpart_id_separator": 0, "top_level_sheets": [ { - "filename": "hbox-watchdog-v3.kicad_sch", + "filename": "hbox-watchdog-v3-PROD.kicad_sch", "name": "hbox-watchdog-v3", "uuid": "561403b3-895e-4153-a7be-3876ae930d43" } ], - "used_designators": "#PWR1-4", + "used_designators": "SW4G1,Rmled1,Rcomp1,Dbk1,Rfreq1,Rgs1,Cbst1,Rtp1,Rdfu1,Rled1,D4G1,Rigb1,Rig1,#PWR1-4,Ccomp1,Rrp1,Rg1,Rts1,DzG1", "variants": [] }, "sheets": [ diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro.bak-projfix b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro.bak-projfix new file mode 100644 index 0000000..494637a --- /dev/null +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_pro.bak-projfix @@ -0,0 +1,787 @@ +{ + "board": { + "3dviewports": [], + "design_settings": { + "defaults": { + "apply_defaults_to_fp_barcodes": false, + "apply_defaults_to_fp_dimensions": false, + "apply_defaults_to_fp_fields": false, + "apply_defaults_to_fp_shapes": false, + "apply_defaults_to_fp_text": false, + "board_outline_line_width": 0.05, + "copper_line_width": 0.2, + "copper_text_italic": false, + "copper_text_size_h": 1.5, + "copper_text_size_v": 1.5, + "copper_text_thickness": 0.3, + "copper_text_upright": false, + "courtyard_line_width": 0.05, + "dimension_precision": 4, + "dimension_units": 3, + "dimensions": { + "arrow_length": 1270000, + "extension_offset": 500000, + "keep_text_aligned": true, + "suppress_zeroes": true, + "text_position": 0, + "units_format": 0 + }, + "fab_line_width": 0.1, + "fab_text_italic": false, + "fab_text_size_h": 1.0, + "fab_text_size_v": 1.0, + "fab_text_thickness": 0.15, + "fab_text_upright": false, + "other_line_width": 0.1, + "other_text_italic": false, + "other_text_size_h": 1.0, + "other_text_size_v": 1.0, + "other_text_thickness": 0.15, + "other_text_upright": false, + "pads": { + "drill": 0.8, + "height": 1.27, + "width": 1.27 + }, + "silk_line_width": 0.1, + "silk_text_italic": false, + "silk_text_size_h": 1.0, + "silk_text_size_v": 1.0, + "silk_text_thickness": 0.1, + "silk_text_upright": false, + "zones": { + "border_display_style": 2, + "border_hatch_pitch": 0.5, + "corner_radius": 0.0, + "corner_smoothing": 0, + "fill_mode": 0, + "hatch_gap": 1.5, + "hatch_orientation": 0.0, + "hatch_smoothing_level": 0, + "hatch_smoothing_value": 0.1, + "hatch_thickness": 1.0, + "min_clearance": 0.3, + "min_island_area": 10.0, + "min_thickness": 0.2, + "pad_connection": 1, + "remove_islands": 0, + "thermal_relief_gap": 0.5, + "thermal_relief_spoke_width": 0.5 + } + }, + "diff_pair_dimensions": [ + { + "gap": 0.0, + "via_gap": 0.0, + "width": 0.0 + } + ], + "drc_exclusions": [], + "meta": { + "version": 2 + }, + "rule_severities": { + "annular_width": "error", + "clearance": "error", + "connection_width": "warning", + "copper_edge_clearance": "error", + "copper_sliver": "warning", + "courtyards_overlap": "error", + "creepage": "error", + "diff_pair_gap_out_of_range": "error", + "diff_pair_uncoupled_length_too_long": "error", + "drill_out_of_range": "error", + "duplicate_footprints": "warning", + "extra_footprint": "warning", + "footprint": "error", + "footprint_filters_mismatch": "ignore", + "footprint_symbol_field_mismatch": "warning", + "footprint_symbol_mismatch": "warning", + "footprint_type_mismatch": "ignore", + "hole_clearance": "error", + "hole_to_hole": "warning", + "holes_co_located": "warning", + "invalid_outline": "error", + "isolated_copper": "warning", + "item_on_disabled_layer": "error", + "items_not_allowed": "error", + "length_out_of_range": "error", + "lib_footprint_issues": "warning", + "lib_footprint_mismatch": "warning", + "malformed_courtyard": "error", + "microvia_drill_out_of_range": "error", + "mirrored_text_on_front_layer": "warning", + "missing_courtyard": "ignore", + "missing_footprint": "warning", + "missing_tuning_profile": "warning", + "net_conflict": "warning", + "nonmirrored_text_on_back_layer": "warning", + "npth_inside_courtyard": "error", + "padstack": "warning", + "pth_inside_courtyard": "error", + "shorting_items": "error", + "silk_edge_clearance": "warning", + "silk_over_copper": "warning", + "silk_overlap": "warning", + "skew_out_of_range": "error", + "solder_mask_bridge": "error", + "starved_thermal": "error", + "text_height": "warning", + "text_on_edge_cuts": "error", + "text_thickness": "warning", + "through_hole_pad_without_hole": "error", + "too_many_vias": "error", + "track_angle": "error", + "track_dangling": "warning", + "track_not_centered_on_via": "ignore", + "track_on_post_machined_layer": "error", + "track_segment_length": "error", + "track_width": "error", + "tracks_crossing": "error", + "tuning_profile_track_geometries": "ignore", + "unconnected_items": "error", + "unresolved_variable": "error", + "via_dangling": "warning", + "zones_intersect": "error" + }, + "rules": { + "max_error": 0.005, + "min_clearance": 0.0, + "min_connection": 0.0, + "min_copper_edge_clearance": 0.5, + "min_groove_width": 0.0, + "min_hole_clearance": 0.25, + "min_hole_to_hole": 0.25, + "min_microvia_diameter": 0.2, + "min_microvia_drill": 0.1, + "min_resolved_spokes": 2, + "min_silk_clearance": 0.0, + "min_text_height": 0.8, + "min_text_thickness": 0.08, + "min_through_hole_diameter": 0.3, + "min_track_width": 0.2, + "min_via_annular_width": 0.1, + "min_via_diameter": 0.5, + "solder_mask_to_copper_clearance": 0.0, + "use_height_for_length_calcs": true + }, + "teardrop_options": [ + { + "td_onpthpad": true, + "td_onroundshapesonly": false, + "td_onsmdpad": true, + "td_ontrackend": false, + "td_onvia": true + } + ], + "teardrop_parameters": [ + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_round_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_rect_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_track_end", + "td_width_to_size_filter_ratio": 0.9 + } + ], + "track_widths": [ + 0.0, + 0.01, + 0.15, + 0.25 + ], + "tuning_pattern_settings": { + "diff_pair_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 1.0 + }, + "diff_pair_skew_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + }, + "single_track_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + } + }, + "via_dimensions": [ + { + "diameter": 0.0, + "drill": 0.0 + }, + { + "diameter": 0.3, + "drill": 0.15 + } + ], + "zones_allow_external_fillets": false + }, + "filename": "hbox-watchdog-v3.kicad_pcb", + "ipc2581": { + "bom_rev": "", + "dist": "", + "distpn": "", + "internal_id": "", + "mfg": "", + "mpn": "", + "sch_revision": "" + }, + "layer_pairs": [], + "layer_presets": [], + "viewports": [] + }, + "boards": [], + "component_class_settings": { + "assignments": [], + "meta": { + "version": 0 + }, + "sheet_component_classes": { + "enabled": false + } + }, + "cvpcb": { + "equivalence_files": [] + }, + "erc": { + "erc_exclusions": [], + "meta": { + "version": 0 + }, + "pin_map": [ + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 1, + 0, + 1, + 2 + ], + [ + 0, + 1, + 0, + 0, + 0, + 0, + 1, + 1, + 2, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ], + [ + 1, + 1, + 1, + 1, + 1, + 0, + 1, + 1, + 1, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 1, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 2, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2 + ] + ], + "rule_severities": { + "bus_definition_conflict": "error", + "bus_entry_needed": "error", + "bus_to_bus_conflict": "error", + "bus_to_net_conflict": "error", + "different_unit_footprint": "error", + "different_unit_net": "error", + "duplicate_reference": "error", + "duplicate_sheet_names": "error", + "endpoint_off_grid": "warning", + "extra_units": "error", + "field_name_whitespace": "warning", + "footprint_filter": "ignore", + "footprint_link_issues": "warning", + "four_way_junction": "ignore", + "ground_pin_not_ground": "warning", + "hier_label_mismatch": "error", + "isolated_pin_label": "warning", + "label_dangling": "error", + "label_multiple_wires": "warning", + "lib_symbol_issues": "warning", + "lib_symbol_mismatch": "warning", + "missing_bidi_pin": "warning", + "missing_input_pin": "warning", + "missing_power_pin": "error", + "missing_unit": "warning", + "multiple_net_names": "warning", + "net_not_bus_member": "warning", + "no_connect_connected": "warning", + "no_connect_dangling": "warning", + "pin_not_connected": "error", + "pin_not_driven": "error", + "pin_to_pin": "warning", + "power_pin_not_driven": "error", + "same_local_global_label": "warning", + "similar_label_and_power": "warning", + "similar_labels": "warning", + "similar_power": "warning", + "simulation_model_issue": "ignore", + "single_global_label": "ignore", + "stacked_pin_name": "warning", + "unannotated": "error", + "unconnected_wire_endpoint": "warning", + "undefined_netclass": "error", + "unit_value_mismatch": "error", + "unresolved_variable": "error", + "wire_dangling": "error" + } + }, + "libraries": { + "pinned_footprint_libs": [], + "pinned_symbol_libs": [] + }, + "meta": { + "filename": "hbox-watchdog-v3-PROD.kicad_pro", + "version": 3 + }, + "net_settings": { + "classes": [ + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Default", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 2147483647, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.2, + "tuning_profile": "", + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "PWR_HI", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 1.5, + "tuning_profile": "", + "via_diameter": 0.8, + "via_drill": 0.4, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "PWR_MID", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 1.0, + "tuning_profile": "", + "via_diameter": 0.8, + "via_drill": 0.4, + "wire_width": 6 + } + ], + "meta": { + "version": 5 + }, + "net_colors": null, + "netclass_assignments": null, + "netclass_patterns": [ + { + "netclass": "PWR_HI", + "pattern": "BAT_PLUS" + }, + { + "netclass": "PWR_HI", + "pattern": "SW_BAT" + }, + { + "netclass": "PWR_HI", + "pattern": "MAIN5V" + }, + { + "netclass": "PWR_HI", + "pattern": "VEH5V" + }, + { + "netclass": "PWR_HI", + "pattern": "SYS5V" + }, + { + "netclass": "PWR_HI", + "pattern": "VIN_SW" + }, + { + "netclass": "PWR_MID", + "pattern": "SW_5V" + }, + { + "netclass": "PWR_MID", + "pattern": "3V3_MODEM" + }, + { + "netclass": "PWR_MID", + "pattern": "5V_FAN" + }, + { + "netclass": "PWR_MID", + "pattern": "24V" + }, + { + "netclass": "PWR_MID", + "pattern": "24V_IN" + }, + { + "netclass": "PWR_MID", + "pattern": "IGN_IN" + }, + { + "netclass": "PWR_MID", + "pattern": "SW_FAN" + }, + { + "netclass": "PWR_MID", + "pattern": "SW3_NODE" + }, + { + "netclass": "PWR_MID", + "pattern": "FAN_RET" + } + ] + }, + "pcbnew": { + "last_paths": { + "idf": "", + "netlist": "./", + "plot": "", + "specctra_dsn": "", + "vrml": "" + }, + "page_layout_descr_file": "" + }, + "schematic": { + "annotate_start_num": 0, + "annotation": { + "method": 0, + "sort_order": 0 + }, + "bom_export_filename": "${PROJECTNAME}.csv", + "bom_fmt_presets": [], + "bom_fmt_settings": { + "field_delimiter": ",", + "keep_line_breaks": false, + "keep_tabs": false, + "name": "CSV", + "ref_delimiter": ",", + "ref_range_delimiter": "", + "string_delimiter": "\"" + }, + "bom_presets": [], + "bom_settings": { + "exclude_dnp": false, + "fields_ordered": [ + { + "group_by": false, + "label": "Reference", + "name": "Reference", + "show": true + }, + { + "group_by": false, + "label": "Qty", + "name": "${QUANTITY}", + "show": true + }, + { + "group_by": true, + "label": "Value", + "name": "Value", + "show": true + }, + { + "group_by": true, + "label": "DNP", + "name": "${DNP}", + "show": true + }, + { + "group_by": true, + "label": "Exclude from BOM", + "name": "${EXCLUDE_FROM_BOM}", + "show": true + }, + { + "group_by": true, + "label": "Exclude from Board", + "name": "${EXCLUDE_FROM_BOARD}", + "show": true + }, + { + "group_by": true, + "label": "Footprint", + "name": "Footprint", + "show": true + }, + { + "group_by": false, + "label": "Datasheet", + "name": "Datasheet", + "show": true + } + ], + "filter_string": "", + "group_symbols": true, + "include_excluded_from_bom": true, + "name": "Default Editing", + "sort_asc": true, + "sort_field": "Reference" + }, + "bus_aliases": {}, + "connection_grid_size": 50.0, + "drawing": { + "dashed_lines_dash_length_ratio": 12.0, + "dashed_lines_gap_length_ratio": 3.0, + "default_line_thickness": 6.0, + "default_text_size": 50.0, + "field_names": [], + "hop_over_size_choice": 0, + "intersheets_ref_own_page": false, + "intersheets_ref_prefix": "", + "intersheets_ref_short": false, + "intersheets_ref_show": false, + "intersheets_ref_suffix": "", + "junction_size_choice": 3, + "label_size_ratio": 0.375, + "operating_point_overlay_i_precision": 3, + "operating_point_overlay_i_range": "~A", + "operating_point_overlay_v_precision": 3, + "operating_point_overlay_v_range": "~V", + "overbar_offset_ratio": 1.23, + "pin_symbol_size": 25.0, + "text_offset_ratio": 0.15 + }, + "legacy_lib_dir": "", + "legacy_lib_list": [], + "meta": { + "version": 1 + }, + "page_layout_descr_file": "", + "plot_directory": "", + "reuse_designators": true, + "subpart_first_id": 65, + "subpart_id_separator": 0, + "top_level_sheets": [ + { + "filename": "hbox-watchdog-v3.kicad_sch", + "name": "hbox-watchdog-v3", + "uuid": "561403b3-895e-4153-a7be-3876ae930d43" + } + ], + "used_designators": "Rtp1,Rled1,Rig1,Rts1,Rrp1,Rg1,DzG1,Rgs1,Rdfu1,#PWR1-4", + "variants": [] + }, + "sheets": [ + [ + "561403b3-895e-4153-a7be-3876ae930d43", + "hbox-watchdog-v3" + ] + ], + "text_variables": {}, + "tuning_profiles": { + "meta": { + "version": 0 + }, + "tuning_profiles_impedance_geometric": [] + } +} diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_sch b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_sch index ade7fe7..29fc918 100644 --- a/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_sch +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3-PROD.kicad_sch @@ -1 +1,26288 @@ -(kicad_sch (version 20260306) (generator "eeschema") (generator_version "10.0") (uuid "561403b3-895e-4153-a7be-3876ae930d43") (paper "A3") (lib_symbols (symbol "Amplifier_Operational:LM358" (pin_names (offset 0.127)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "U" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "LM358" (at 0 -5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "LM358_0_1" (polyline (pts (xy -5.08 5.08) (xy 5.08 0) (xy -5.08 -5.08) (xy -5.08 5.08)) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "LM358_1_1" (pin input line (at -7.62 2.54 0) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin input line (at -7.62 -2.54 0) (length 2.54) (name "+" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin output line (at 7.62 0 180) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin power_in line (at -2.54 -7.62 90) (length 3.81) (name "V-" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin power_in line (at -2.54 7.62 270) (length 3.81) (name "V+" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector_Generic:Conn_01x02" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x02" (at 0 -5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Conn_01x02_1_1" (rectangle (start -1.27 1.27) (end 1.27 -3.81) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -2.413) (end 0 -2.667) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -2.54 0) (length 3.81) (name "Pin_2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector_Generic:Conn_01x03" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x03" (at 0 -5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Conn_01x03_1_1" (rectangle (start -1.27 3.81) (end 1.27 -3.81) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 2.667) (end 0 2.413) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -2.413) (end 0 -2.667) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 2.54 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -2.54 0) (length 3.81) (name "Pin_3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector_Generic:Conn_01x04" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x04" (at 0 -7.62 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Conn_01x04_1_1" (rectangle (start -1.27 3.81) (end 1.27 -6.35) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 2.667) (end 0 2.413) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -2.413) (end 0 -2.667) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -4.953) (end 0 -5.207) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 2.54 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -2.54 0) (length 3.81) (name "Pin_3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -5.08 0) (length 3.81) (name "Pin_4" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector_Generic:Conn_01x05" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 7.62 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x05" (at 0 -7.62 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Conn_01x05_1_1" (rectangle (start -1.27 6.35) (end 1.27 -6.35) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 5.207) (end 0 4.953) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 2.667) (end 0 2.413) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -2.413) (end 0 -2.667) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -4.953) (end 0 -5.207) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 5.08 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 2.54 0) (length 3.81) (name "Pin_2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -2.54 0) (length 3.81) (name "Pin_4" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -5.08 0) (length 3.81) (name "Pin_5" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector_Generic:Conn_01x20" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 25.4 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x20" (at 0 -27.94 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Conn_01x20_1_1" (rectangle (start -1.27 24.13) (end 1.27 -26.67) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 22.987) (end 0 22.733) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 20.447) (end 0 20.193) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 17.907) (end 0 17.653) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 15.367) (end 0 15.113) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 12.827) (end 0 12.573) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 10.287) (end 0 10.033) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 7.747) (end 0 7.493) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 5.207) (end 0 4.953) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 2.667) (end 0 2.413) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -2.413) (end 0 -2.667) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -4.953) (end 0 -5.207) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -7.493) (end 0 -7.747) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -10.033) (end 0 -10.287) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -12.573) (end 0 -12.827) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -15.113) (end 0 -15.367) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -17.653) (end 0 -17.907) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -20.193) (end 0 -20.447) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -22.733) (end 0 -22.987) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -25.273) (end 0 -25.527) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 22.86 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 20.32 0) (length 3.81) (name "Pin_2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 17.78 0) (length 3.81) (name "Pin_3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 15.24 0) (length 3.81) (name "Pin_4" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 12.7 0) (length 3.81) (name "Pin_5" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 10.16 0) (length 3.81) (name "Pin_6" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 7.62 0) (length 3.81) (name "Pin_7" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 5.08 0) (length 3.81) (name "Pin_8" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 2.54 0) (length 3.81) (name "Pin_9" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_10" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -2.54 0) (length 3.81) (name "Pin_11" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -5.08 0) (length 3.81) (name "Pin_12" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -7.62 0) (length 3.81) (name "Pin_13" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -10.16 0) (length 3.81) (name "Pin_14" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -12.7 0) (length 3.81) (name "Pin_15" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -15.24 0) (length 3.81) (name "Pin_16" (effects (font (size 1.27 1.27)))) (number "16" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -17.78 0) (length 3.81) (name "Pin_17" (effects (font (size 1.27 1.27)))) (number "17" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -20.32 0) (length 3.81) (name "Pin_18" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -22.86 0) (length 3.81) (name "Pin_19" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -25.4 0) (length 3.81) (name "Pin_20" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:C" (pin_numbers (hide yes)) (pin_names (offset 0.254)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "C" (at 0.635 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "C" (at 0.635 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 0.9652 -3.81 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "cap capacitor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "C_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "C_0_1" (polyline (pts (xy -2.032 0.762) (xy 2.032 0.762)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy -2.032 -0.762) (xy 2.032 -0.762)) (stroke (width 0.508) (type default)) (fill (type none)))) (symbol "C_1_1" (pin passive line (at 0 3.81 270) (length 2.794) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 2.794) (name "" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:C_Polarized" (pin_numbers (hide yes)) (pin_names (offset 0.254)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "C" (at 0.635 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "C_Polarized" (at 0.635 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 0.9652 -3.81 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Polarized capacitor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "cap capacitor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "CP_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "C_Polarized_0_1" (rectangle (start -2.286 0.508) (end 2.286 1.016) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.778 2.286) (xy -0.762 2.286)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.27 2.794) (xy -1.27 1.778)) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 2.286 -0.508) (end -2.286 -1.016) (stroke (width 0) (type default)) (fill (type outline)))) (symbol "C_Polarized_1_1" (pin passive line (at 0 3.81 270) (length 2.794) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 2.794) (name "" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:Crystal" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "Y" (at 0 3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Crystal" (at 0 -3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Crystal_0_1" (polyline (pts (xy -2.54 0) (xy -1.905 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.905 -1.27) (xy -1.905 1.27)) (stroke (width 0.508) (type default)) (fill (type none))) (rectangle (start -1.143 2.54) (end 1.143 -2.54) (stroke (width 0.3048) (type default)) (fill (type none))) (polyline (pts (xy 1.905 -1.27) (xy 1.905 1.27)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy 2.54 0) (xy 1.905 0)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Crystal_1_1" (pin passive line (at -3.81 0 0) (length 1.27) (name "1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 1.27) (name "2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:D" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "D" (at 0 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "D" (at 0 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "D_0_1" (polyline (pts (xy -1.27 1.27) (xy -1.27 -1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 1.27) (xy 1.27 -1.27) (xy -1.27 0) (xy 1.27 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 0) (xy -1.27 0)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "D_1_1" (pin passive line (at -3.81 0 0) (length 2.54) (name "K" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 2.54) (name "A" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:D_Schottky" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "D" (at 0 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "D_Schottky" (at 0 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Schottky diode" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "diode Schottky" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "D_Schottky_0_1" (polyline (pts (xy -1.905 0.635) (xy -1.905 1.27) (xy -1.27 1.27) (xy -1.27 -1.27) (xy -0.635 -1.27) (xy -0.635 -0.635)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 1.27) (xy 1.27 -1.27) (xy -1.27 0) (xy 1.27 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 0) (xy -1.27 0)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "D_Schottky_1_1" (pin passive line (at -3.81 0 0) (length 2.54) (name "K" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 2.54) (name "A" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:D_TVS" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "D" (at 0 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "D_TVS" (at 0 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Bidirectional transient-voltage-suppression diode" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "diode TVS thyrector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "D_TVS_0_1" (polyline (pts (xy -2.54 1.27) (xy -2.54 -1.27) (xy 2.54 1.27) (xy 2.54 -1.27) (xy -2.54 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.508 1.27) (xy 0 1.27) (xy 0 -1.27) (xy -0.508 -1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 0) (xy -1.27 0)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "D_TVS_1_1" (pin passive line (at -3.81 0 0) (length 2.54) (name "A1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 2.54) (name "A2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:D_Zener" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "D" (at 0 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "D_Zener" (at 0 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Zener diode" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "diode" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "D_Zener_0_1" (polyline (pts (xy -1.27 -1.27) (xy -1.27 1.27) (xy -0.762 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 0) (xy -1.27 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 1.27 -1.27) (xy 1.27 1.27) (xy -1.27 0) (xy 1.27 -1.27)) (stroke (width 0.254) (type default)) (fill (type none)))) (symbol "D_Zener_1_1" (pin passive line (at -3.81 0 0) (length 2.54) (name "K" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 2.54) (name "A" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:L" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "L" (at -1.27 0 90) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "L" (at 1.905 0 90) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "L_0_1" (arc (start 0 2.54) (mid 0.635 1.905) (end 0 1.27) (stroke (width 0) (type default)) (fill (type none))) (arc (start 0 1.27) (mid 0.635 0.635) (end 0 0) (stroke (width 0) (type default)) (fill (type none))) (arc (start 0 0) (mid 0.635 -0.635) (end 0 -1.27) (stroke (width 0) (type default)) (fill (type none))) (arc (start 0 -1.27) (mid 0.635 -1.905) (end 0 -2.54) (stroke (width 0) (type default)) (fill (type none)))) (symbol "L_1_1" (pin passive line (at 0 3.81 270) (length 1.27) (name "1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 1.27) (name "2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:LED" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "D" (at 0 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 0 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Light emitting diode" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Sim.Pins" "1=K 2=A" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "LED diode" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "LED* LED_SMD:* LED_THT:*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "LED_0_1" (polyline (pts (xy -3.048 -0.762) (xy -4.572 -2.286) (xy -3.81 -2.286) (xy -4.572 -2.286) (xy -4.572 -1.524)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.778 -0.762) (xy -3.302 -2.286) (xy -2.54 -2.286) (xy -3.302 -2.286) (xy -3.302 -1.524)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.27 0) (xy 1.27 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.27 -1.27) (xy -1.27 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 -1.27) (xy 1.27 1.27) (xy -1.27 0) (xy 1.27 -1.27)) (stroke (width 0.254) (type default)) (fill (type none)))) (symbol "LED_1_1" (pin passive line (at -3.81 0 0) (length 2.54) (name "K" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 2.54) (name "A" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:Polyfuse" (pin_numbers (hide yes)) (pin_names (offset 0)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "F" (at -2.54 0 90) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Polyfuse" (at 2.54 0 90) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 1.27 -5.08 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)) (justify left))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Resettable fuse, polymeric positive temperature coefficient" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "resettable fuse PTC PPTC polyfuse polyswitch" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "*polyfuse* *PTC*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Polyfuse_0_1" (polyline (pts (xy -1.524 2.54) (xy -1.524 1.524) (xy 1.524 -1.524) (xy 1.524 -2.54)) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start -0.762 2.54) (end 0.762 -2.54) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0 2.54) (xy 0 -2.54)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Polyfuse_1_1" (pin passive line (at 0 3.81 270) (length 1.27) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 1.27) (name "" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:Q_NMOS" (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "Q" (at 5.08 1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "Q_NMOS" (at 5.08 -1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 5.08 2.54 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "N-MOSFET transistor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "NMOS N-MOS" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Q_NMOS_0_1" (polyline (pts (xy 0.254 1.905) (xy 0.254 -1.905)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.254 0) (xy -2.54 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0.762 2.286) (xy 0.762 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 0.508) (xy 0.762 -0.508)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 -1.27) (xy 0.762 -2.286)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 -1.778) (xy 3.302 -1.778) (xy 3.302 1.778) (xy 0.762 1.778)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 1.016 0) (xy 2.032 0.381) (xy 2.032 -0.381) (xy 1.016 0)) (stroke (width 0) (type default)) (fill (type outline))) (circle (center 1.651 0) (radius 2.794) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.54 2.54) (xy 2.54 1.778)) (stroke (width 0) (type default)) (fill (type none))) (circle (center 2.54 1.778) (radius 0.254) (stroke (width 0) (type default)) (fill (type outline))) (circle (center 2.54 -1.778) (radius 0.254) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 2.54 -2.54) (xy 2.54 0) (xy 0.762 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 2.921 0.381) (xy 3.683 0.381)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 3.302 0.381) (xy 2.921 -0.254) (xy 3.683 -0.254) (xy 3.302 0.381)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Q_NMOS_1_1" (pin passive line (at 2.54 5.08 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "D" (effects (font (size 1.27 1.27))))) (pin input line (at -5.08 0 0) (length 2.54) (name "G" (effects (font (size 1.27 1.27)))) (number "G" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 -5.08 90) (length 2.54) (name "S" (effects (font (size 1.27 1.27)))) (number "S" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:Q_NMOS_GSD" (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "Q" (at 5.08 1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "Q_NMOS_GSD" (at 5.08 -1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 5.08 2.54 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Q_NMOS_GSD_0_1" (polyline (pts (xy 0.254 1.905) (xy 0.254 -1.905)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.254 0) (xy -2.54 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0.762 2.286) (xy 0.762 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 0.508) (xy 0.762 -0.508)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 -1.27) (xy 0.762 -2.286)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 -1.778) (xy 3.302 -1.778) (xy 3.302 1.778) (xy 0.762 1.778)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 1.016 0) (xy 2.032 0.381) (xy 2.032 -0.381) (xy 1.016 0)) (stroke (width 0) (type default)) (fill (type outline))) (circle (center 1.651 0) (radius 2.794) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.54 2.54) (xy 2.54 1.778)) (stroke (width 0) (type default)) (fill (type none))) (circle (center 2.54 1.778) (radius 0.254) (stroke (width 0) (type default)) (fill (type outline))) (circle (center 2.54 -1.778) (radius 0.254) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 2.54 -2.54) (xy 2.54 0) (xy 0.762 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 2.794 0.508) (xy 2.921 0.381) (xy 3.683 0.381) (xy 3.81 0.254)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 3.302 0.381) (xy 2.921 -0.254) (xy 3.683 -0.254) (xy 3.302 0.381)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Q_NMOS_GSD_1_1" (pin input line (at -5.08 0 0) (length 2.54) (name "G" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 -5.08 90) (length 2.54) (name "S" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 5.08 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:Q_NPN_BCE" (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "Q" (at 5.08 1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "Q_NPN_BCE" (at 5.08 -1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 5.08 2.54 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Q_NPN_BCE_0_1" (polyline (pts (xy 0.635 1.905) (xy 0.635 -1.905) (xy 0.635 -1.905)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy 0.635 0.635) (xy 2.54 2.54)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0.635 -0.635) (xy 2.54 -2.54) (xy 2.54 -2.54)) (stroke (width 0) (type default)) (fill (type none))) (circle (center 1.27 0) (radius 2.8194) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 -1.778) (xy 1.778 -1.27) (xy 2.286 -2.286) (xy 1.27 -1.778) (xy 1.27 -1.778)) (stroke (width 0) (type default)) (fill (type outline)))) (symbol "Q_NPN_BCE_1_1" (pin input line (at -5.08 0 0) (length 5.715) (name "B" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 5.08 270) (length 2.54) (name "C" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 -5.08 90) (length 2.54) (name "E" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:Q_PMOS" (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "Q" (at 5.08 1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "Q_PMOS" (at 5.08 -1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 5.08 2.54 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "P-MOSFET transistor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "PMOS P-MOS" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Q_PMOS_0_1" (polyline (pts (xy 0.254 1.905) (xy 0.254 -1.905)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.254 0) (xy -2.54 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0.762 2.286) (xy 0.762 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 1.778) (xy 3.302 1.778) (xy 3.302 -1.778) (xy 0.762 -1.778)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0.762 0.508) (xy 0.762 -0.508)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.762 -1.27) (xy 0.762 -2.286)) (stroke (width 0.254) (type default)) (fill (type none))) (circle (center 1.651 0) (radius 2.794) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.286 0) (xy 1.27 0.381) (xy 1.27 -0.381) (xy 2.286 0)) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 2.54 2.54) (xy 2.54 1.778)) (stroke (width 0) (type default)) (fill (type none))) (circle (center 2.54 1.778) (radius 0.254) (stroke (width 0) (type default)) (fill (type outline))) (circle (center 2.54 -1.778) (radius 0.254) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 2.54 -2.54) (xy 2.54 0) (xy 0.762 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 2.921 -0.381) (xy 3.683 -0.381)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 3.302 -0.381) (xy 2.921 0.254) (xy 3.683 0.254) (xy 3.302 -0.381)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Q_PMOS_1_1" (pin passive line (at 2.54 5.08 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "D" (effects (font (size 1.27 1.27))))) (pin input line (at -5.08 0 0) (length 2.54) (name "G" (effects (font (size 1.27 1.27)))) (number "G" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 -5.08 90) (length 2.54) (name "S" (effects (font (size 1.27 1.27)))) (number "S" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:R" (pin_numbers (hide yes)) (pin_names (offset 0)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "R" (at 2.032 0 90) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "R" (at 0 0 90) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at -1.778 0 90) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "R res resistor" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "R_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "R_0_1" (rectangle (start -1.016 -2.54) (end 1.016 2.54) (stroke (width 0.254) (type default)) (fill (type none)))) (symbol "R_1_1" (pin passive line (at 0 3.81 270) (length 1.27) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 1.27) (name "" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Regulator_Linear:AMS1117-3.3" (pin_names (offset 0.254)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "U" (at -3.81 3.175 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "AMS1117-3.3" (at 0 3.175 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 2.54 -6.35 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "AMS1117-3.3_0_1" (rectangle (start -5.08 1.905) (end 5.08 -5.08) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "AMS1117-3.3_1_1" (pin power_in line (at 0 -7.62 90) (length 2.54) (name "GND" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin power_out line (at 7.62 0 180) (length 2.54) (name "VO" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin power_in line (at -7.62 0 0) (length 2.54) (name "VI" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Sensor_Humidity:SHT4x" (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "U" (at 0 8.89 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "SHT4x" (at 0 6.35 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Footprint" "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" (at 3.81 -6.35 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)) (justify left))) (property "Datasheet" "https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf" (at 3.81 -8.89 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)) (justify left))) (property "Description" "Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "Sensirion environment environmental measurement digital SHT40 SHT41 SHT45" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Sensirion?DFN*1.5x1.5mm*P0.8mm*SHT4x*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "SHT4x_1_1" (rectangle (start -5.08 5.08) (end 5.08 -5.08) (stroke (width 0.254) (type default)) (fill (type background))) (pin bidirectional line (at -7.62 -2.54 0) (length 2.54) (name "SDA" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin input line (at -7.62 2.54 0) (length 2.54) (name "SCL" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin power_in line (at 2.54 7.62 270) (length 2.54) (name "VDD" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin power_in line (at 2.54 -7.62 90) (length 2.54) (name "VSS" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Sensor_Temperature:TMP102xxDRL" (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "U" (at -2.54 10.795 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "TMP102xxDRL" (at -2.54 8.89 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Footprint" "Package_TO_SOT_SMD:SOT-563" (at 1.27 -8.89 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)) (justify left))) (property "Datasheet" "https://www.ti.com/lit/ds/symlink/tmp102.pdf" (at 1.27 -11.43 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)) (justify left))) (property "Description" "Digital Temperature Sensor, ±3°C, low-Power, SMBus, 12 bit, Two-Wire Serial Interface, SOT-563" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "digital temperature sensor i2c smbus" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "SOT?563*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "TMP102xxDRL_0_1" (rectangle (start -7.62 7.62) (end 7.62 -7.62) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "TMP102xxDRL_1_1" (polyline (pts (xy 2.413 1.905) (xy 2.413 -1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.413 1.905) (xy 3.048 1.905)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.413 1.27) (xy 3.048 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.413 0.635) (xy 3.048 0.635)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.413 0) (xy 3.048 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.413 -0.635) (xy 3.048 -0.635)) (stroke (width 0.254) (type default)) (fill (type none))) (arc (start 2.413 1.905) (mid 3.048 2.5373) (end 3.683 1.905) (stroke (width 0.254) (type default)) (fill (type none))) (circle (center 3.048 -3.81) (radius 1.27) (stroke (width 0.254) (type default)) (fill (type outline))) (polyline (pts (xy 3.683 1.905) (xy 3.683 -1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (rectangle (start 3.683 -3.175) (end 2.413 -1.27) (stroke (width 0.254) (type default)) (fill (type outline))) (pin input line (at -10.16 2.54 0) (length 2.54) (name "SCL" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin power_in line (at 0 -10.16 90) (length 2.54) (name "GND" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin open_collector line (at 10.16 5.08 180) (length 2.54) (name "ALERT" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin input line (at -10.16 -2.54 0) (length 2.54) (name "ADD0" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin power_in line (at 0 10.16 270) (length 2.54) (name "V+" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at -10.16 5.08 0) (length 2.54) (name "SDA" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Switch:SW_Push" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "SW" (at 1.27 2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "SW_Push" (at 0 -1.524 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "SW_Push_0_1" (circle (center -2.032 0) (radius 0.508) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0 1.27) (xy 0 3.048)) (stroke (width 0) (type default)) (fill (type none))) (circle (center 2.032 0) (radius 0.508) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 2.54 1.27) (xy -2.54 1.27)) (stroke (width 0) (type default)) (fill (type none))) (pin passive line (at -5.08 0 0) (length 2.54) (name "1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 5.08 0 180) (length 2.54) (name "2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "power:GND" (power global) (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "#PWR" (at 0 -6.35 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 0 -3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Power symbol creates a global label with name \"GND\" , ground" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "global power" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "GND_0_1" (polyline (pts (xy 0 0) (xy 0 -1.27) (xy 1.27 -1.27) (xy 0 -2.54) (xy -1.27 -1.27) (xy 0 -1.27)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "GND_1_1" (pin power_in line (at 0 0 270) (length 0) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "power:GNDREF" (power global) (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "#PWR" (at 0 -6.35 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Value" "GNDREF" (at 0 -3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Power symbol creates a global label with name \"GNDREF\" , reference supply ground" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "global power" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "GNDREF_0_1" (polyline (pts (xy -0.635 -1.905) (xy 0.635 -1.905)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -0.127 -2.54) (xy 0.127 -2.54)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0 -1.27) (xy 0 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 1.27 -1.27) (xy -1.27 -1.27)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "GNDREF_1_1" (pin power_in line (at 0 0 270) (length 0) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "power:PWR_FLAG" (power global) (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "#FLG" (at 0 1.905 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 0 3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "flag power" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "PWR_FLAG_0_0" (pin power_out line (at 0 0 90) (length 0) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (symbol "PWR_FLAG_0_1" (polyline (pts (xy 0 0) (xy 0 1.27) (xy -1.016 1.905) (xy 0 2.54) (xy 1.016 1.905) (xy 0 1.27)) (stroke (width 0) (type default)) (fill (type none)))) (embedded_fonts no)) (symbol "Drogheda-sym:MP1584EN" (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "U" (at 2.54 0 0) (effects (font (size 1.27 1.27)))) (property "Value" "MP1584EN" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" (at 0 -5.08 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Datasheet" "https://www.monolithicpower.com/en/mp1584.html" (at 0 -7.62 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Description" "MP1584EN 3A 28V step-down converter (SOIC-8-EP)" (at 0 -10.16 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "ki_keywords" "buck regulator step-down MP1584" (at 0 0 0) (effects (font (size 1.27 1.27))) (hide yes)) (symbol "MP1584EN_0_1" (rectangle (start -5.08 -7.62) (end 5.08 7.62) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "MP1584EN_1_1" (pin power_in line (at -7.62 5.08 0) (length 2.54) (name "VIN" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27))))) (pin passive line (at -7.62 2.54 0) (length 2.54) (name "EN" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -7.62 0 0) (length 2.54) (name "FREQ" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at -7.62 -2.54 0) (length 2.54) (name "FB" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin passive line (at -7.62 -5.08 0) (length 2.54) (name "COMP" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin passive line (at 7.62 5.08 180) (length 2.54) (name "BST" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27))))) (pin passive line (at 7.62 2.54 180) (length 2.54) (name "SW" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin power_in line (at 0 -10.16 90) (length 2.54) (name "GND" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))))) (symbol "Jumper:SolderJumper_2_Open" (pin_numbers (hide yes)) (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom no) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "JP" (at 0 2.032 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "SolderJumper_2_Open" (at 0 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 -7.62 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Solder Jumper, 2-pole, open" (at 0 -5.08 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "solder jumper SPST" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "SolderJumper*Open*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "SolderJumper_2_Open_0_1" (polyline (pts (xy -0.254 1.016) (xy -0.254 -1.016)) (stroke (width 0.1524) (type default)) (fill (type none))) (arc (start -0.254 -1.016) (mid -1.2656 0) (end -0.254 1.016) (stroke (width 0.1524) (type default)) (fill (type outline))) (arc (start 0.254 1.016) (mid 1.2656 0) (end 0.254 -1.016) (stroke (width 0.1524) (type default)) (fill (type outline))) (polyline (pts (xy 0.254 1.016) (xy 0.254 -1.016)) (stroke (width 0.1524) (type default)) (fill (type none)))) (symbol "SolderJumper_2_Open_1_1" (pin passive line (at -5.08 0 0) (length 3.81) (name "A" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 5.08 0 180) (length 3.81) (name "B" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Drogheda-sym:LTC4040EUFD" (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "U" (at 2.54 0 0) (effects (font (size 1.27 1.27)))) (property "Value" "LTC4040EUFD" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" (at 0 -5.08 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Datasheet" "https://www.analog.com/media/en/technical-documentation/data-sheets/4040fb.pdf" (at 0 -7.62 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Description" "2.5A Battery Backup Power Manager, 1S Li-Ion/LiFePO4, buck charger + boost backup, QFN-24 4x5" (at 0 -10.16 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "ki_keywords" "battery backup charger boost power-path LTC" (at 0 0 0) (effects (font (size 1.27 1.27))) (hide yes)) (symbol "LTC4040EUFD_0_1" (rectangle (start -15.24 -20.32) (end 15.24 20.32) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "LTC4040EUFD_1_1" (pin input line (at -17.78 17.78 0) (length 2.54) (name "PFI" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 15.24 0) (length 2.54) (name "BSTFB" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 12.7 0) (length 2.54) (name "RSTFB" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27))))) (pin passive line (at -17.78 10.16 0) (length 2.54) (name "PROG" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -17.78 7.62 0) (length 2.54) (name "CLPROG" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 5.08 0) (length 2.54) (name "NTC" (effects (font (size 1.27 1.27)))) (number "17" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 2.54 0) (length 2.54) (name "CHGOFF" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 0 0) (length 2.54) (name "BSTOFF" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 -2.54 0) (length 2.54) (name "F2" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 -5.08 0) (length 2.54) (name "F1" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27))))) (pin input line (at -17.78 -7.62 0) (length 2.54) (name "F0" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27))))) (pin open_collector line (at -17.78 -10.16 0) (length 2.54) (name "CHRG" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27))))) (pin open_collector line (at -17.78 -12.7 0) (length 2.54) (name "FAULT" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27))))) (pin open_collector line (at -17.78 -15.24 0) (length 2.54) (name "PFO" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27))))) (pin open_collector line (at -17.78 -17.78 0) (length 2.54) (name "RST" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27))))) (pin power_in line (at 17.78 17.78 180) (length 2.54) (name "VIN" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at 17.78 15.24 180) (length 2.54) (name "CLN" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27))))) (pin output line (at 17.78 12.7 180) (length 2.54) (name "IGATE" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27))))) (pin power_in line (at 17.78 10.16 180) (length 2.54) (name "VSYS" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 17.78 7.62 180) (length 2.54) (name "VSYS" (effects (font (size 1.27 1.27)))) (number "24" (effects (font (size 1.27 1.27))))) (pin passive line (at 17.78 2.54 180) (length 2.54) (name "SW" (effects (font (size 1.27 1.27)))) (number "21" (effects (font (size 1.27 1.27))))) (pin passive line (at 17.78 0 180) (length 2.54) (name "SW" (effects (font (size 1.27 1.27)))) (number "22" (effects (font (size 1.27 1.27))))) (pin passive line (at 17.78 -5.08 180) (length 2.54) (name "BAT" (effects (font (size 1.27 1.27)))) (number "23" (effects (font (size 1.27 1.27))))) (pin input line (at 17.78 -10.16 180) (length 2.54) (name "OVSNS" (effects (font (size 1.27 1.27)))) (number "16" (effects (font (size 1.27 1.27))))) (pin power_in line (at 0 -22.86 90) (length 2.54) (name "GND_EP" (effects (font (size 1.27 1.27)))) (number "25" (effects (font (size 1.27 1.27))))))) (symbol "Drogheda-sym:AO4406A" (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "Q" (at 2.54 0 0) (effects (font (size 1.27 1.27)))) (property "Value" "AO4406A" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (at 0 -5.08 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Datasheet" "~" (at 0 -7.62 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Description" "N-Channel MOSFET 30V 13A 8.5mOhm SOIC-8 (pins 1-3=S, 4=G, 5-8=D) — VIN-VSYS disconnect" (at 0 -10.16 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "ki_keywords" "nmos mosfet soic8 disconnect" (at 0 0 0) (effects (font (size 1.27 1.27))) (hide yes)) (symbol "AO4406A_0_1" (rectangle (start -5.08 -5.08) (end 5.08 5.08) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "AO4406A_1_1" (pin input line (at -7.62 0 0) (length 2.54) (name "G" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin passive line (at -2.54 7.62 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 7.62 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 7.62 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27))))) (pin passive line (at 5.08 7.62 270) (length 2.54) (name "D" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27))))) (pin passive line (at -2.54 -7.62 90) (length 2.54) (name "S" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -7.62 90) (length 2.54) (name "S" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 -7.62 90) (length 2.54) (name "S" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))))) (symbol "Jumper:SolderJumper_3_Bridged12" (pin_names (offset 0) (hide yes)) (exclude_from_sim no) (in_bom no) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "JP" (at -2.54 -2.54 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "SolderJumper_3_Bridged12" (at 0 2.794 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 -15.24 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "3-pole Solder Jumper, pins 1+2 closed/bridged" (at 0 -12.7 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "Solder Jumper SPDT" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "SolderJumper*Bridged12*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "SolderJumper_3_Bridged12_0_1" (polyline (pts (xy -2.54 0) (xy -2.032 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.016 1.016) (xy -1.016 -1.016)) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start -1.016 0.508) (end -0.508 -0.508) (stroke (width 0) (type default)) (fill (type outline))) (arc (start -1.016 -1.016) (mid -2.0276 0) (end -1.016 1.016) (stroke (width 0) (type default)) (fill (type outline))) (rectangle (start -0.508 1.016) (end 0.508 -1.016) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 0 -1.27) (xy 0 -1.016)) (stroke (width 0) (type default)) (fill (type none))) (arc (start 1.016 1.016) (mid 2.0276 0) (end 1.016 -1.016) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 1.016 1.016) (xy 1.016 -1.016)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 2.54 0) (xy 2.032 0)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "SolderJumper_3_Bridged12_1_1" (pin passive line (at -5.08 0 0) (length 2.54) (name "A" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 2.54) (name "C" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at 5.08 0 180) (length 2.54) (name "B" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector:TestPoint" (pin_numbers (hide yes)) (pin_names (offset 0.762) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "TP" (at 0 6.858 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "TestPoint" (at 0 5.08 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 5.08 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 5.08 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "test point" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "test point tp" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Pin* Test*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "TestPoint_0_1" (circle (center 0 3.302) (radius 0.762) (stroke (width 0) (type default)) (fill (type none)))) (symbol "TestPoint_1_1" (pin passive line (at 0 0 90) (length 2.54) (name "1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Relay:Relay_SPDT" (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "K" (at 11.43 3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "Relay_SPDT" (at 11.43 1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 11.43 -1.27 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)) (justify left))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Relay SPDT, monostable, EN50005" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "1P2T 1-Form-C single pole throw" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Relay?SPDT*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Relay_SPDT_0_0" (polyline (pts (xy 7.62 5.08) (xy 7.62 2.54) (xy 6.985 3.175) (xy 7.62 3.81)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Relay_SPDT_0_1" (rectangle (start -10.16 5.08) (end 10.16 -5.08) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -8.255 1.905) (end -1.905 -1.905) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy -7.62 -1.905) (xy -2.54 1.905)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy -5.08 5.08) (xy -5.08 1.905)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -5.08 -5.08) (xy -5.08 -1.905)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.905 0) (xy -1.27 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy -0.635 0) (xy 0 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.635 0) (xy 1.27 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.905 0) (xy 2.54 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.54 5.08) (xy 2.54 2.54) (xy 3.175 3.175) (xy 2.54 3.81)) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 3.175 0) (xy 3.81 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 5.08 -2.54) (xy 3.175 3.81)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy 5.08 -2.54) (xy 5.08 -5.08)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Relay_SPDT_1_1" (pin passive line (at 5.08 -7.62 90) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27))))) (pin passive line (at 2.54 7.62 270) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27))))) (pin passive line (at 7.62 7.62 270) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 7.62 270) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "A1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -7.62 90) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "A2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Drogheda-sym:SimpleRTK2B_Pro_Socket" (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "MOD" (at 2.54 0 0) (effects (font (size 1.27 1.27)))) (property "Value" "SimpleRTK2B_Pro_Socket" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Module:Arduino_UNO_R3" (at 0 -5.08 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Datasheet" "https://www.ardusimple.com/simplertk2b-pro-hookup-guide/" (at 0 -7.62 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "Description" "simpleRTK2B Pro (ZED-F9P) mounted as shield on Arduino-UNO-pattern female headers. Pads match Module:Arduino_UNO_R3. D0=TX1 D1=RX1 D2=RX2 D8=TX2 (Ardusimple pinout R00). IOREF driven 3.3V; 5V pin = input (5V=OUTPUT switch OFF); XBee-socket switch on the Pro parked on UART1." (at 0 -10.16 0) (effects (font (size 1.27 1.27))) (hide yes)) (property "ki_keywords" "ardusimple simplertk2b f9p shield socket carrier" (at 0 0 0) (effects (font (size 1.27 1.27))) (hide yes)) (symbol "SimpleRTK2B_Pro_Socket_0_1" (rectangle (start -12.7 -26.67) (end 12.7 24.13) (stroke (width 0.254) (type default)) (fill (type background)))) (symbol "SimpleRTK2B_Pro_Socket_1_1" (pin output line (at -15.24 20.32 0) (length 2.54) (name "TX1_D0" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27))))) (pin input line (at -15.24 17.78 0) (length 2.54) (name "RX1_D1" (effects (font (size 1.27 1.27)))) (number "16" (effects (font (size 1.27 1.27))))) (pin input line (at -15.24 15.24 0) (length 2.54) (name "RX2_D2" (effects (font (size 1.27 1.27)))) (number "17" (effects (font (size 1.27 1.27))))) (pin output line (at -15.24 12.7 0) (length 2.54) (name "TX2_D8" (effects (font (size 1.27 1.27)))) (number "23" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 7.62 0) (length 2.54) (name "SDA" (effects (font (size 1.27 1.27)))) (number "31" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 5.08 0) (length 2.54) (name "SCL" (effects (font (size 1.27 1.27)))) (number "32" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 2.54 0) (length 2.54) (name "AREF" (effects (font (size 1.27 1.27)))) (number "30" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 0 0) (length 2.54) (name "D3" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -2.54 0) (length 2.54) (name "D4" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -5.08 0) (length 2.54) (name "D5" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -7.62 0) (length 2.54) (name "D6" (effects (font (size 1.27 1.27)))) (number "21" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -10.16 0) (length 2.54) (name "D7" (effects (font (size 1.27 1.27)))) (number "22" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -12.7 0) (length 2.54) (name "D9" (effects (font (size 1.27 1.27)))) (number "24" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -15.24 0) (length 2.54) (name "D10" (effects (font (size 1.27 1.27)))) (number "25" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -17.78 0) (length 2.54) (name "FENCE_D11" (effects (font (size 1.27 1.27)))) (number "26" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -20.32 0) (length 2.54) (name "EXTINT_D12" (effects (font (size 1.27 1.27)))) (number "27" (effects (font (size 1.27 1.27))))) (pin passive line (at -15.24 -22.86 0) (length 2.54) (name "TPS_D13" (effects (font (size 1.27 1.27)))) (number "28" (effects (font (size 1.27 1.27))))) (pin power_in line (at 15.24 20.32 180) (length 2.54) (name "5V" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 17.78 180) (length 2.54) (name "VIN" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 15.24 180) (length 2.54) (name "3V3_OUT" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin input line (at 15.24 12.7 180) (length 2.54) (name "IOREF" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 10.16 180) (length 2.54) (name "RESET" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin power_in line (at 15.24 7.62 180) (length 2.54) (name "GND" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 5.08 180) (length 2.54) (name "GND" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 2.54 180) (length 2.54) (name "GND" (effects (font (size 1.27 1.27)))) (number "29" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 0 180) (length 2.54) (name "A0" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 -2.54 180) (length 2.54) (name "A1" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 -5.08 180) (length 2.54) (name "A2" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 -7.62 180) (length 2.54) (name "A3" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 -10.16 180) (length 2.54) (name "A4" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 -12.7 180) (length 2.54) (name "A5" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 -17.78 180) (length 2.54) (name "NC" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))))) (symbol "Connector_Generic:Conn_01x10" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 12.7 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x10" (at 0 -15.24 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "Conn_01x10_1_1" (rectangle (start -1.27 11.43) (end 1.27 -13.97) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 10.287) (end 0 10.033) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 7.747) (end 0 7.493) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 5.207) (end 0 4.953) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 2.667) (end 0 2.413) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -2.413) (end 0 -2.667) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -4.953) (end 0 -5.207) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -7.493) (end 0 -7.747) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -10.033) (end 0 -10.287) (stroke (width 0.1524) (type default)) (fill (type none))) (rectangle (start -1.27 -12.573) (end 0 -12.827) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 10.16 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 7.62 0) (length 3.81) (name "Pin_2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 5.08 0) (length 3.81) (name "Pin_3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 2.54 0) (length 3.81) (name "Pin_4" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_5" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -2.54 0) (length 3.81) (name "Pin_6" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -5.08 0) (length 3.81) (name "Pin_7" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -7.62 0) (length 3.81) (name "Pin_8" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -10.16 0) (length 3.81) (name "Pin_9" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -12.7 0) (length 3.81) (name "Pin_10" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Relay:G5V-1" (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "K" (at 11.43 3.81 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "G5V-1" (at 11.43 1.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Relay_THT:Relay_SPDT_Omron_G5V-1" (at 28.702 -0.762 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5v_1.pdf" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "Single Pole Relay SPDT" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "Relay*SPDT*Omron*G5V?1*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "G5V-1_0_0" (polyline (pts (xy 7.62 5.08) (xy 7.62 2.54) (xy 6.985 3.175) (xy 7.62 3.81)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "G5V-1_0_1" (rectangle (start -10.16 5.08) (end 10.16 -5.08) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -8.255 1.905) (end -1.905 -1.905) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy -7.62 -1.905) (xy -2.54 1.905)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy -5.08 5.08) (xy -5.08 1.905)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -5.08 -5.08) (xy -5.08 -1.905)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.905 0) (xy -1.27 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy -0.635 0) (xy 0 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 0.635 0) (xy 1.27 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.905 0) (xy 2.54 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 2.54 5.08) (xy 2.54 2.54) (xy 3.175 3.175) (xy 2.54 3.81)) (stroke (width 0) (type default)) (fill (type outline))) (polyline (pts (xy 3.175 0) (xy 3.81 0)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 5.08 -2.54) (xy 3.175 3.81)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy 5.08 -2.54) (xy 5.08 -5.08)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "G5V-1_1_1" (pin passive line (at 2.54 7.62 270) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 7.62 270) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27))))) (pin passive line (at 5.08 -7.62 90) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27))))) (pin passive line (at 5.08 -7.62 90) (length 2.54) (hide yes) (name "" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27))))) (pin passive line (at -5.08 -7.62 90) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27))))) (pin passive line (at 7.62 7.62 270) (length 2.54) (name "" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector:USB_C_Receptacle_USB2.0_14P" (pin_names (offset 1.016)) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (duplicate_pin_numbers_are_jumpers no) (property "Reference" "J" (at 0 22.225 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "USB_C_Receptacle_USB2.0_14P" (at 0 19.685 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 3.81 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip" (at 3.81 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "Description" "USB 2.0-only 14P Type-C Receptacle connector" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "usb universal serial bus type-C USB2.0" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (property "ki_fp_filters" "USB*C*Receptacle*" (at 0 0 0) (show_name no) (do_not_autoplace no) (hide yes) (effects (font (size 1.27 1.27)))) (symbol "USB_C_Receptacle_USB2.0_14P_0_0" (rectangle (start -0.254 -17.78) (end 0.254 -16.764) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 15.494) (end 9.144 14.986) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 10.414) (end 9.144 9.906) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 7.874) (end 9.144 7.366) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 2.794) (end 9.144 2.286) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 0.254) (end 9.144 -0.254) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 -2.286) (end 9.144 -2.794) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 10.16 -4.826) (end 9.144 -5.334) (stroke (width 0) (type default)) (fill (type none)))) (symbol "USB_C_Receptacle_USB2.0_14P_0_1" (rectangle (start -10.16 17.78) (end 10.16 -17.78) (stroke (width 0.254) (type default)) (fill (type background))) (polyline (pts (xy -8.89 -3.81) (xy -8.89 3.81)) (stroke (width 0.508) (type default)) (fill (type none))) (rectangle (start -7.62 -3.81) (end -6.35 3.81) (stroke (width 0.254) (type default)) (fill (type outline))) (arc (start -7.62 3.81) (mid -6.985 4.4423) (end -6.35 3.81) (stroke (width 0.254) (type default)) (fill (type none))) (arc (start -7.62 3.81) (mid -6.985 4.4423) (end -6.35 3.81) (stroke (width 0.254) (type default)) (fill (type outline))) (arc (start -8.89 3.81) (mid -6.985 5.7067) (end -5.08 3.81) (stroke (width 0.508) (type default)) (fill (type none))) (arc (start -5.08 -3.81) (mid -6.985 -5.7067) (end -8.89 -3.81) (stroke (width 0.508) (type default)) (fill (type none))) (arc (start -6.35 -3.81) (mid -6.985 -4.4423) (end -7.62 -3.81) (stroke (width 0.254) (type default)) (fill (type none))) (arc (start -6.35 -3.81) (mid -6.985 -4.4423) (end -7.62 -3.81) (stroke (width 0.254) (type default)) (fill (type outline))) (polyline (pts (xy -5.08 3.81) (xy -5.08 -3.81)) (stroke (width 0.508) (type default)) (fill (type none))) (circle (center -2.54 1.143) (radius 0.635) (stroke (width 0.254) (type default)) (fill (type outline))) (polyline (pts (xy -1.27 4.318) (xy 0 6.858) (xy 1.27 4.318) (xy -1.27 4.318)) (stroke (width 0.254) (type default)) (fill (type outline))) (polyline (pts (xy 0 -2.032) (xy 2.54 0.508) (xy 2.54 1.778)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy 0 -3.302) (xy -2.54 -0.762) (xy -2.54 0.508)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy 0 -5.842) (xy 0 4.318)) (stroke (width 0.508) (type default)) (fill (type none))) (circle (center 0 -5.842) (radius 1.27) (stroke (width 0) (type default)) (fill (type outline))) (rectangle (start 1.905 1.778) (end 3.175 3.048) (stroke (width 0.254) (type default)) (fill (type outline)))) (symbol "USB_C_Receptacle_USB2.0_14P_1_1" (pin passive line (at 0 -22.86 90) (length 5.08) (name "GND" (effects (font (size 1.27 1.27)))) (number "A1" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 15.24 180) (length 5.08) (name "VBUS" (effects (font (size 1.27 1.27)))) (number "A4" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 15.24 10.16 180) (length 5.08) (name "CC1" (effects (font (size 1.27 1.27)))) (number "A5" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 15.24 -2.54 180) (length 5.08) (name "D+" (effects (font (size 1.27 1.27)))) (number "A6" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 15.24 2.54 180) (length 5.08) (name "D-" (effects (font (size 1.27 1.27)))) (number "A7" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 15.24 180) (length 5.08) (hide yes) (name "VBUS" (effects (font (size 1.27 1.27)))) (number "A9" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -22.86 90) (length 5.08) (hide yes) (name "GND" (effects (font (size 1.27 1.27)))) (number "A12" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -22.86 90) (length 5.08) (hide yes) (name "GND" (effects (font (size 1.27 1.27)))) (number "B1" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 15.24 180) (length 5.08) (hide yes) (name "VBUS" (effects (font (size 1.27 1.27)))) (number "B4" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 15.24 7.62 180) (length 5.08) (name "CC2" (effects (font (size 1.27 1.27)))) (number "B5" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 15.24 -5.08 180) (length 5.08) (name "D+" (effects (font (size 1.27 1.27)))) (number "B6" (effects (font (size 1.27 1.27))))) (pin bidirectional line (at 15.24 0 180) (length 5.08) (name "D-" (effects (font (size 1.27 1.27)))) (number "B7" (effects (font (size 1.27 1.27))))) (pin passive line (at 15.24 15.24 180) (length 5.08) (hide yes) (name "VBUS" (effects (font (size 1.27 1.27)))) (number "B9" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -22.86 90) (length 5.08) (hide yes) (name "GND" (effects (font (size 1.27 1.27)))) (number "B12" (effects (font (size 1.27 1.27))))) (pin passive line (at -7.62 -22.86 90) (length 5.08) (name "SHIELD" (effects (font (size 1.27 1.27)))) (number "SH" (effects (font (size 1.27 1.27)))))) (embedded_fonts no))) (junction (at 30.48 104.14) (diameter 0) (color 0 0 0 0) (uuid "1dea3333-6fff-486d-ba31-f0620b56175c")) (junction (at 30.48 52.07) (diameter 0) (color 0 0 0 0) (uuid "54fa00f2-dbd8-448d-8ddb-646dce66ed53")) (junction (at 30.48 114.3) (diameter 0) (color 0 0 0 0) (uuid "7aa71794-78b4-4823-8e62-2240c3e8aadf")) (junction (at 30.48 44.45) (diameter 0) (color 0 0 0 0) (uuid "8340e2ac-044d-4df5-8b40-00726576e662")) (junction (at 36.83 76.2) (diameter 0) (color 0 0 0 0) (uuid "b6680902-df20-453c-852a-4b6f40cdf66c")) (no_connect (at 100.33 74.93) (uuid "2c96de3b-c87e-4648-a4de-adb0d310b25a")) (no_connect (at 119.38 57.15) (uuid "61b911e0-14fe-4ed1-b311-dd2d324c792c")) (no_connect (at 119.38 74.93) (uuid "6f128d49-ffcb-4d7a-8ea2-e7ac83a6bcd9")) (no_connect (at 118.11 151.13) (uuid "7b412fa9-b66c-4afb-8949-eefb28300cc2")) (no_connect (at 100.33 36.83) (uuid "80bd8bab-4a4e-4ecc-9e39-4715780ab3a1")) (no_connect (at 100.33 67.31) (uuid "88cb4fd7-9e90-4142-9eeb-f9fca5ded373")) (no_connect (at 100.33 41.91) (uuid "89ce46fb-c44a-4833-b661-3ced15c6060c")) (no_connect (at 50.8 25.4) (uuid "92a88c90-d077-4b9f-abaa-2fbbf8696aa4")) (no_connect (at 100.33 39.37) (uuid "b296d711-b9dc-414f-9cfa-78246c1a741d")) (no_connect (at 50.8 27.94) (uuid "bc9ff7e8-11c6-4810-bbd1-b10ff1532106")) (no_connect (at 100.33 44.45) (uuid "d2951a90-8039-4bbc-9ffe-947751ddda96")) (no_connect (at 119.38 54.61) (uuid "db567d29-a47a-4f17-aea7-70a29c513b02")) (no_connect (at 119.38 59.69) (uuid "e7bc2b41-ed79-46c4-b9a8-2b6f6db42204")) (no_connect (at 119.38 77.47) (uuid "ed2d54ef-41af-4085-b217-727c441d4fd1")) (wire (pts (xy 208.28 128.27) (xy 208.28 127)) (stroke (width 0) (type default)) (uuid "02766857-cbae-49f3-a4f6-729b5913e4f8")) (wire (pts (xy 177.8 71.12) (xy 177.8 72.39)) (stroke (width 0) (type default)) (uuid "05b72508-1b3c-474b-8078-7c9287eac15a")) (wire (pts (xy 99.06 69.85) (xy 100.33 69.85)) (stroke (width 0) (type default)) (uuid "06c3a53f-9def-4275-a30f-3fb760e89331")) (wire (pts (xy 242.57 118.11) (xy 242.57 116.84)) (stroke (width 0) (type default)) (uuid "0766e5f3-b989-42fe-a85c-f9e261053980")) (wire (pts (xy 106.68 20.32) (xy 106.68 19.05)) (stroke (width 0) (type default)) (uuid "155f3dd3-a422-4d5c-bab8-0476605c7f21")) (wire (pts (xy 217.17 87.63) (xy 217.17 85.09)) (stroke (width 0) (type default)) (uuid "1650d9b9-2645-4db7-a1e0-2bf7fbe16612")) (wire (pts (xy 40.64 76.2) (xy 36.83 76.2)) (stroke (width 0) (type default)) (uuid "1d4aca69-6520-4078-81b9-73e2f0247d8d")) (wire (pts (xy 25.4 44.45) (xy 30.48 44.45)) (stroke (width 0) (type default)) (uuid "241d542b-0844-4f9d-a61f-18087ad7bbe2")) (wire (pts (xy 111.76 121.92) (xy 111.76 123.19)) (stroke (width 0) (type default)) (uuid "242cebb1-3880-491f-acfb-849e6cc4745c")) (wire (pts (xy 30.48 114.3) (xy 43.18 114.3)) (stroke (width 0) (type default)) (uuid "27b1a645-32fa-4781-87c6-87dde864adc3")) (wire (pts (xy 247.65 33.02) (xy 271.78 33.02)) (stroke (width 0) (type default)) (uuid "294e904d-4c3b-4013-b4b8-3bfd41121bae")) (wire (pts (xy 30.48 139.7) (xy 30.48 140.97)) (stroke (width 0) (type default)) (uuid "2b09c450-850d-42f6-81f9-96c3c55d45b6")) (wire (pts (xy 120.65 82.55) (xy 119.38 82.55)) (stroke (width 0) (type default)) (uuid "2df77661-1a0c-4d05-94dd-d2fca60bda73")) (wire (pts (xy 50.8 76.2) (xy 48.26 76.2)) (stroke (width 0) (type default)) (uuid "2e2c4ea2-d0b1-4931-aed4-9449bf1c467c")) (wire (pts (xy 99.06 57.15) (xy 100.33 57.15)) (stroke (width 0) (type default)) (uuid "30802635-43c6-412b-891e-3e3b553ff2b8")) (wire (pts (xy 177.8 83.82) (xy 177.8 80.01)) (stroke (width 0) (type default)) (uuid "326198fc-bd6d-458d-9a89-b432459e56cd")) (wire (pts (xy 161.29 71.12) (xy 161.29 72.39)) (stroke (width 0) (type default)) (uuid "32a50af6-a6b2-4087-9f7d-b46c628eb8c8")) (wire (pts (xy 179.07 140.97) (xy 179.07 142.24)) (stroke (width 0) (type default)) (uuid "370a24e1-0269-43af-9fbf-c799aa12e18f")) (wire (pts (xy 99.06 62.23) (xy 100.33 62.23)) (stroke (width 0) (type default)) (uuid "3782fc93-2fd9-47ba-ae0d-6910be6231a3")) (wire (pts (xy 43.18 114.3) (xy 43.18 113.03)) (stroke (width 0) (type default)) (uuid "3960a20c-cf88-40e8-b31b-f4515919df22")) (wire (pts (xy 99.06 49.53) (xy 100.33 49.53)) (stroke (width 0) (type default)) (uuid "412e002c-f046-4bcb-a409-11b8be8e2cba")) (wire (pts (xy 143.51 20.32) (xy 143.51 19.05)) (stroke (width 0) (type default)) (uuid "4183080a-4381-46d6-a8b7-28cd1eb12f5f")) (wire (pts (xy 274.32 110.49) (xy 274.32 109.22)) (stroke (width 0) (type default)) (uuid "4460083a-0932-4844-b1c9-692d221f3d6e")) (wire (pts (xy 120.65 85.09) (xy 119.38 85.09)) (stroke (width 0) (type default)) (uuid "4d1c3ee0-a05c-4f75-b413-012265da5b55")) (wire (pts (xy 31.75 154.94) (xy 31.75 156.21)) (stroke (width 0) (type default)) (uuid "4e79b4d8-7315-451b-92d3-9a3844a39c20")) (wire (pts (xy 99.06 82.55) (xy 100.33 82.55)) (stroke (width 0) (type default)) (uuid "5213793d-531b-47df-8cea-bac40ff57967")) (wire (pts (xy 179.07 152.4) (xy 179.07 149.86)) (stroke (width 0) (type default)) (uuid "5243ed60-1739-4000-8721-13df3c08f4d4")) (wire (pts (xy 120.65 72.39) (xy 119.38 72.39)) (stroke (width 0) (type default)) (uuid "53203ae8-44c9-4d18-bed6-1602485431a1")) (wire (pts (xy 30.48 52.07) (xy 43.18 52.07)) (stroke (width 0) (type default)) (uuid "5761c200-8bbc-4b50-b395-36b11204e2c1")) (wire (pts (xy 26.67 104.14) (xy 30.48 104.14)) (stroke (width 0) (type default)) (uuid "598d2fc5-a5ee-4763-8ab6-023be945e80f")) (wire (pts (xy 86.36 123.19) (xy 86.36 120.65)) (stroke (width 0) (type default)) (uuid "643ca470-03f2-4fce-bf0f-96f0b0ba0453")) (wire (pts (xy 82.55 189.23) (xy 76.2 189.23)) (stroke (width 0) (type default)) (uuid "66ed9eeb-8c74-4194-88d4-4cad47822b3d")) (wire (pts (xy 224.79 90.17) (xy 224.79 91.44)) (stroke (width 0) (type default)) (uuid "6b66dbbd-c382-4e6e-afe6-345632703cf5")) (wire (pts (xy 96.52 20.32) (xy 96.52 19.05)) (stroke (width 0) (type default)) (uuid "6c94c748-35a7-45e6-8d9c-4bd142b3a6e9")) (wire (pts (xy 204.47 146.05) (xy 204.47 147.32)) (stroke (width 0) (type default)) (uuid "6dc75b5f-fa03-485f-8fd4-8df7c063fc65")) (wire (pts (xy 116.84 20.32) (xy 116.84 19.05)) (stroke (width 0) (type default)) (uuid "6f75153d-b269-42e1-98c0-4fc39a37ce54")) (wire (pts (xy 134.62 20.32) (xy 134.62 19.05)) (stroke (width 0) (type default)) (uuid "715f0b8b-96ed-4e46-8de3-6ad8958470a5")) (wire (pts (xy 120.65 49.53) (xy 119.38 49.53)) (stroke (width 0) (type default)) (uuid "7279ae0b-eecc-4601-a5cf-016baa5cf530")) (wire (pts (xy 125.73 20.32) (xy 125.73 19.05)) (stroke (width 0) (type default)) (uuid "7396afa6-c085-4266-8a71-5713468c17c9")) (wire (pts (xy 99.06 77.47) (xy 100.33 77.47)) (stroke (width 0) (type default)) (uuid "7721c000-5374-4e7e-9234-ab22c30410b3")) (wire (pts (xy 107.95 167.64) (xy 107.95 166.37)) (stroke (width 0) (type default)) (uuid "7893342c-e878-4a55-b15e-fcbc06fdbbe8")) (wire (pts (xy 128.27 133.35) (xy 128.27 132.08)) (stroke (width 0) (type default)) (uuid "79377557-91fd-4c94-8006-ebaaf93d8435")) (wire (pts (xy 27.94 76.2) (xy 36.83 76.2)) (stroke (width 0) (type default)) (uuid "79fa1642-b2d6-42e2-8863-45347de73640")) (wire (pts (xy 43.18 104.14) (xy 43.18 105.41)) (stroke (width 0) (type default)) (uuid "7b0e894f-4107-4ac2-9170-eec62b3cd6cd")) (wire (pts (xy 120.65 69.85) (xy 119.38 69.85)) (stroke (width 0) (type default)) (uuid "7f2e370d-1e8d-4b6c-9046-77e41321cf05")) (wire (pts (xy 25.4 21.59) (xy 30.48 21.59)) (stroke (width 0) (type default)) (uuid "8275ca94-123e-4de5-bf5e-e460fd915e2b")) (wire (pts (xy 120.65 52.07) (xy 119.38 52.07)) (stroke (width 0) (type default)) (uuid "8642574e-c692-46c1-8a86-98c8c23e6aec")) (wire (pts (xy 99.06 59.69) (xy 100.33 59.69)) (stroke (width 0) (type default)) (uuid "87e7c44e-5d3f-4832-a73e-462782cc36a9")) (wire (pts (xy 30.48 149.86) (xy 30.48 148.59)) (stroke (width 0) (type default)) (uuid "88496774-3742-4a04-b216-7029f929f19b")) (wire (pts (xy 30.48 44.45) (xy 43.18 44.45)) (stroke (width 0) (type default)) (uuid "893b7e41-db5c-451c-9f5a-873a2a287867")) (wire (pts (xy 99.06 54.61) (xy 100.33 54.61)) (stroke (width 0) (type default)) (uuid "8aa5f603-1a89-46a5-9eed-59b17669426f")) (wire (pts (xy 76.2 129.54) (xy 76.2 130.81)) (stroke (width 0) (type default)) (uuid "8f340026-70f1-495a-b3ff-67db54abdaca")) (wire (pts (xy 156.21 114.3) (xy 156.21 111.76)) (stroke (width 0) (type default)) (uuid "8fbc4b3b-7d71-4069-84ea-8ea74838ab6e")) (wire (pts (xy 30.48 114.3) (xy 30.48 115.57)) (stroke (width 0) (type default)) (uuid "91ef4789-8854-414a-9707-12149f356675")) (wire (pts (xy 111.76 133.35) (xy 111.76 130.81)) (stroke (width 0) (type default)) (uuid "924155aa-ef19-41cb-8a58-860266d3d83e")) (wire (pts (xy 67.31 20.32) (xy 66.04 20.32)) (stroke (width 0) (type default)) (uuid "95638607-44ca-41a9-8be3-294cebef868e")) (wire (pts (xy 204.47 157.48) (xy 204.47 154.94)) (stroke (width 0) (type default)) (uuid "95670dab-17d0-46fa-8482-5c9ce86ae1f3")) (wire (pts (xy 153.67 134.62) (xy 153.67 132.08)) (stroke (width 0) (type default)) (uuid "9a42641c-b807-4b16-8bb2-bcb0e86ebd88")) (wire (pts (xy 99.06 52.07) (xy 100.33 52.07)) (stroke (width 0) (type default)) (uuid "9c00703d-3ba5-4bd5-8494-283efdc67101")) (wire (pts (xy 76.2 140.97) (xy 76.2 138.43)) (stroke (width 0) (type default)) (uuid "9c2c8509-cc26-4637-905b-dd48ca511d11")) (wire (pts (xy 30.48 113.03) (xy 30.48 114.3)) (stroke (width 0) (type default)) (uuid "a128bfae-4049-4258-97bb-ca0508806059")) (wire (pts (xy 30.48 21.59) (xy 30.48 22.86)) (stroke (width 0) (type default)) (uuid "a2844e63-668b-48d4-9324-70e96206ce9a")) (wire (pts (xy 99.06 80.01) (xy 100.33 80.01)) (stroke (width 0) (type default)) (uuid "a4b49458-e33c-4d95-bca6-857491d371a6")) (wire (pts (xy 185.42 114.3) (xy 185.42 110.49)) (stroke (width 0) (type default)) (uuid "a5b14191-451f-4af3-b3f8-ba061b064682")) (wire (pts (xy 274.32 97.79) (xy 274.32 99.06)) (stroke (width 0) (type default)) (uuid "a7ff458a-dd4a-42b4-a442-fae07248b518")) (wire (pts (xy 160.02 154.94) (xy 160.02 153.67)) (stroke (width 0) (type default)) (uuid "b01276c7-8fa8-49be-b983-c9e0fa844067")) (wire (pts (xy 36.83 74.93) (xy 36.83 76.2)) (stroke (width 0) (type default)) (uuid "b2a8f611-bdfe-4666-9297-e31ce0500adb")) (wire (pts (xy 224.79 100.33) (xy 224.79 99.06)) (stroke (width 0) (type default)) (uuid "ba021564-391b-4bb1-ad8e-b5671570cf44")) (wire (pts (xy 161.29 82.55) (xy 161.29 80.01)) (stroke (width 0) (type default)) (uuid "c1ff58aa-6c0f-4595-aefe-61b4883ae760")) (wire (pts (xy 30.48 104.14) (xy 30.48 105.41)) (stroke (width 0) (type default)) (uuid "c55ca7fe-4a05-448c-ad74-48a3a35a3ee1")) (wire (pts (xy 271.78 35.56) (xy 264.16 35.56)) (stroke (width 0) (type default)) (uuid "cffda71c-90f7-463c-8d8e-b3581f8b7c51")) (wire (pts (xy 99.06 64.77) (xy 100.33 64.77)) (stroke (width 0) (type default)) (uuid "d71e6c5e-4bba-4e68-a0eb-badab8b4aa5b")) (wire (pts (xy 86.36 109.22) (xy 86.36 110.49)) (stroke (width 0) (type default)) (uuid "db796fb1-7c18-468e-979a-0a1a21c0346b")) (wire (pts (xy 238.76 33.02) (xy 240.03 33.02)) (stroke (width 0) (type default)) (uuid "df823740-5b93-4bb0-aa66-6d4d1987ff59")) (wire (pts (xy 153.67 123.19) (xy 153.67 124.46)) (stroke (width 0) (type default)) (uuid "e1b5fb14-461b-45eb-b191-0597b57bbaad")) (wire (pts (xy 30.48 102.87) (xy 30.48 104.14)) (stroke (width 0) (type default)) (uuid "e7176a69-f412-4a16-9ce2-b591060cb301")) (wire (pts (xy 30.48 40.64) (xy 30.48 44.45)) (stroke (width 0) (type default)) (uuid "e72a37b6-67f1-443b-988d-8885f8dde37e")) (wire (pts (xy 30.48 52.07) (xy 30.48 54.61)) (stroke (width 0) (type default)) (uuid "e9228f8a-4201-4991-9f4f-81c479e0b505")) (wire (pts (xy 161.29 63.5) (xy 161.29 60.96)) (stroke (width 0) (type default)) (uuid "eb270f93-f364-4712-9be9-aef980e315c8")) (wire (pts (xy 156.21 100.33) (xy 156.21 101.6)) (stroke (width 0) (type default)) (uuid "f00bc842-8965-40c5-84b4-282a022a954d")) (wire (pts (xy 180.34 50.8) (xy 180.34 52.07)) (stroke (width 0) (type default)) (uuid "f03b32dd-5599-41c9-91eb-75bc866f7dcf")) (wire (pts (xy 185.42 101.6) (xy 185.42 102.87)) (stroke (width 0) (type default)) (uuid "f58fd259-65b5-4528-acc5-29fe16ff3067")) (wire (pts (xy 30.48 104.14) (xy 43.18 104.14)) (stroke (width 0) (type default)) (uuid "f6c23970-0a3f-4f25-8e05-093b83451921")) (wire (pts (xy 36.83 66.04) (xy 36.83 67.31)) (stroke (width 0) (type default)) (uuid "fbac858f-21c7-470d-981e-2234bc193681")) (wire (pts (xy 31.75 165.1) (xy 31.75 163.83)) (stroke (width 0) (type default)) (uuid "fc99ef60-bc1c-49f9-9d42-d945b42c343d")) (wire (pts (xy 82.55 173.99) (xy 76.2 173.99)) (stroke (width 0) (type default)) (uuid "fd4a7d57-5c78-40f8-9e72-f3883246bf8c")) (wire (pts (xy 149.86 20.32) (xy 149.86 19.05)) (stroke (width 0) (type default)) (uuid "fe2cd5f0-5c89-4f10-a21c-cc86869b95d4")) (label "3V3" (at 116.84 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "060cfd85-b01d-4dcd-8ea3-5e8f6cfc246d")) (label "IGN_IN" (at 50.8 22.86 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0887f17b-380d-4c21-b188-33eb5e4b3bd8")) (label "24V_IN" (at 55.88 157.48 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0b20571c-9fcc-46a2-8de9-3b2e5b750cb4")) (label "BAT_PLUS" (at 30.48 33.02 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0c8f419b-5285-4ec4-80a4-6625718c7e6e")) (label "IGN_SENSE" (at 29.21 76.2 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "114a6fe8-1170-4515-9a46-99bfb49ca361")) (label "SW_5V" (at 224.79 90.17 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "119ad74d-ee7e-42a5-ba9b-9da3196454cc")) (label "5V_FAN" (at 214.63 139.7 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "13462acf-bad8-4579-8ce9-8705f3350275")) (label "FAN_PWM" (at 204.47 146.05 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "172d67ec-2a4a-4654-b5ff-3b5ecd241f13")) (label "FAN_TACH" (at 160.02 154.94 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "175d9b99-fa12-46a8-8f05-5e548cd1b890")) (label "I2C_SCL" (at 66.04 179.07 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "1b136a82-7c67-464f-bf47-6920be93686d")) (label "3V3" (at 99.06 80.01 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "1d5656dc-e27c-441a-a8db-5c8a89da32c9")) (label "3V3" (at 160.02 146.05 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "1d7eb9e9-16f3-4832-a104-4224e148fdd9")) (label "GNSS_RX" (at 99.06 57.15 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "253305d5-99e0-4d6b-8e08-c1f6711de525")) (label "24V" (at 86.36 123.19 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "26a8f72f-c2a9-48dd-89dc-d0e9b4dbdc0a")) (label "PWR_CTRL" (at 99.06 52.07 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "283163fd-b650-4716-953f-363d526d8aa1")) (label "Q10_GATE" (at 85.09 100.33 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2942f717-eb5a-440f-86b1-4d5d979c357b")) (label "GND" (at 25.4 21.59 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "29b7512e-6047-4feb-844e-01dff23056fd")) (label "LED_K" (at 238.76 33.02 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "2a2cf193-f04e-4acc-93ab-02d965692694")) (label "FAN_RET" (at 222.25 139.7 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2a9bf73e-da0f-49c3-9d74-0384d01ea8a3")) (label "24V" (at 128.27 124.46 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2ae78cc3-d8aa-4b93-9780-e43a47d31ba5")) (label "LED_K" (at 274.32 97.79 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2b515514-43a2-4394-9a75-dab2a5366d64")) (label "USART1_RX" (at 242.57 109.22 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2cda8fd7-3677-4574-88f7-49bb70aa7bcf")) (label "MAIN5V" (at 106.68 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "2e013394-2da9-4b13-9b45-d920ad7ce7de")) (label "FAN_GATE" (at 153.67 123.19 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2f2f6456-366f-4536-92d6-ee293879fd4e")) (label "GNSS_TX" (at 99.06 54.61 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "2f3d61ad-fce6-4b87-a59f-dab759e66659")) (label "I2C_SDA" (at 66.04 184.15 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "32839549-3585-43fd-890c-4c1aa4b60602")) (label "I2C_SCL" (at 97.79 153.67 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3371b5f5-a1c7-46a9-b5b3-dfa2052bc181")) (label "GND" (at 274.32 110.49 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "34e515e9-03ed-4c64-99a4-3b694dcbd174")) (label "I2C_SDA" (at 152.4 190.5 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "360dbe97-de6e-4756-9f8a-a52e4180ede6")) (label "3V3" (at 107.95 146.05 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "37d24fc3-1855-4403-8dfc-e29226fe36d4")) (label "FAN_TACH" (at 179.07 152.4 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "38543283-08bd-4af1-abab-cf845c3b2511")) (label "FAN_RET" (at 208.28 116.84 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "38c9da34-17f2-4d78-963e-e77d57f10d0f")) (label "GATE_LS" (at 180.34 50.8 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "38e1405a-4b8b-4c57-a9d4-bae4370ef3b7")) (label "24V_IN" (at 50.8 17.78 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "39847511-fc4d-4392-9541-62156d2326c8")) (label "GND" (at 66.04 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3a24cdba-f18b-4df4-95be-2ba4acf56247")) (label "SW_IN" (at 217.17 87.63 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3b80bbe3-b6d2-4c33-bbe7-3496e241b55c")) (label "I2C_SDA" (at 97.79 151.13 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3b8a2955-7380-40a1-af84-68f890358b6b")) (label "USART1_TX" (at 262.89 124.46 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3ba20446-fa0a-45a7-9431-18be16b108d4")) (label "IGN_IN" (at 36.83 66.04 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "3ff6c5f7-6a9d-4668-a9f1-585f3d3eac5a")) (label "FAN_GATE" (at 200.66 121.92 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "41f2ed0f-7b32-4803-9233-f0b09ddb4fcc")) (label "Q10_GATE" (at 76.2 129.54 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "43c46883-9294-40cb-bc24-e5597e0e31a3")) (label "3V3" (at 114.3 186.69 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "4483d0b5-2c21-4494-875f-e077404ef3e0")) (label "GATE_LS" (at 156.21 100.33 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "4a13ec6c-49dd-4a16-9a15-391307fda779")) (label "GND" (at 107.95 167.64 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4a619233-8d58-4962-8707-2967c75cf2c8")) (label "FAN_RET" (at 232.41 149.86 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4eda8b47-71de-4658-9301-ebf3ee244b64")) (label "GND" (at 208.28 128.27 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4f97e729-086a-49a0-9f17-3bf671b61fd2")) (label "FAN_TACH" (at 99.06 77.47 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "5106f0a6-0988-49be-98a6-2c2a78305c07")) (label "5V_FAN" (at 125.73 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "51508a5e-ebcd-4605-9b8b-ee1f9e90e697")) (label "GND" (at 50.8 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "553dee3b-002d-4ad3-a1cf-f536c056716b")) (label "3V3" (at 31.75 154.94 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "5582f735-cd2c-4a79-be41-00c63a7d260f")) (label "FAN_TACH_RAW" (at 232.41 154.94 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "5860fab5-2b7c-46f6-98e8-78500863f82a")) (label "5V_SENSE" (at 26.67 104.14 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "59da4d73-046d-4681-8626-283055e3f82c")) (label "24V" (at 111.76 121.92 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "5cd2bcf7-b5ee-42f1-bb24-6bcb93183fd1")) (label "GND" (at 120.65 82.55 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "5dddf7b9-d4ae-4e8b-83ff-485e36e23b6f")) (label "GND" (at 82.55 189.23 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "5ff69a82-43f7-4dba-9597-1a0da201448a")) (label "Q10_GATE" (at 78.74 115.57 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "627f6071-0d51-4a1c-925b-9381089e6415")) (label "GND" (at 152.4 187.96 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "670d7359-74ff-421a-b9bf-6f925e25e761")) (label "3V3" (at 242.57 118.11 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "6ae822ae-b4c5-457c-989a-9354b7c790fe")) (label "GNSS_TX" (at 264.16 144.78 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "6b59e216-a5dd-4762-b69d-7d38fe14bb6e")) (label "GND" (at 128.27 133.35 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "6f404b10-f009-4c4c-b64e-257555933162")) (label "LED_A" (at 255.27 33.02 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "6fa74707-f15c-4695-98d7-aed080ffc943")) (label "GND" (at 185.42 114.3 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "71452c6b-c07e-488f-be32-3cf7fffe026a")) (label "3V3" (at 177.8 71.12 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "72b9c79c-db5b-4565-8dee-e05d81e759bf")) (label "SW_5V" (at 143.51 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "74d1fd10-034c-4ece-bbad-1173500ccf8e")) (label "USART1_RX" (at 262.89 127 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "76d68778-b090-46d5-99e2-071e090753da")) (label "3V3" (at 152.4 185.42 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "79e5d6a5-e650-4d1b-9fa2-404f6348c96b")) (label "EXT_LED" (at 185.42 101.6 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "7ed94c67-c5a4-4a93-908f-e0b0a8bd6552")) (label "FAN_PWM" (at 99.06 64.77 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "818aaeb6-7779-4eec-ab0c-6d6f87454b59")) (label "SW_5V" (at 217.17 74.93 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "863b1389-f450-4d33-9660-c0502f2ec834")) (label "BASE_LS" (at 148.59 106.68 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8654876d-2e3d-42d1-ba6b-615c6ffd8863")) (label "EXT_LED" (at 266.7 104.14 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "88ebeadf-b496-4f91-b28e-ed3719030cbc")) (label "5V_FAN" (at 232.41 147.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "89647de6-f2f0-411b-b894-752739ef2b22")) (label "GATE_LS" (at 209.55 80.01 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8d592084-6394-4d89-8d9c-b21b377c48f3")) (label "5V_SENSE" (at 99.06 59.69 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8f1d9d24-c6c0-4f82-bf40-710c85f5bbfa")) (label "GND" (at 95.25 194.31 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "93434d73-8817-4f89-83ae-04695e076415")) (label "GND" (at 97.79 158.75 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "95f8b3aa-b9f3-48ab-bf10-bfab28e56dbc")) (label "SW_5V" (at 264.16 139.7 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "99c645fd-b2d8-4b20-a7c1-e7a4dee0c101")) (label "EXT_LED" (at 99.06 69.85 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9b5fe168-5e98-4138-b2ae-c6c6e8daaa68")) (label "FAN_TACH_RAW" (at 179.07 140.97 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a10eae59-0abe-42c4-b625-09eeec6af78a")) (label "3V3" (at 120.65 85.09 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a1724d4f-b5f5-4ead-9cf6-63ad2c55701f")) (label "GND" (at 232.41 152.4 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a1d5d82c-ee57-4023-81c5-79099821f6d7")) (label "GND" (at 96.52 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a404377f-d45a-40f4-9367-da91b866738d")) (label "BAT_SENSE" (at 99.06 49.53 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a97e84cd-482e-42cc-9939-cd43c1ab16f7")) (label "FAN_GATE" (at 204.47 157.48 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "aa5bf77b-ada2-4878-8e77-354c71480e83")) (label "USART1_TX" (at 120.65 49.53 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ab7c1371-b11a-4347-9be2-62443c929726")) (label "GND" (at 264.16 142.24 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "acc562fc-9d16-40c6-bc67-88cfea78d48e")) (label "GND" (at 153.67 134.62 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "acc7895c-278f-4d2b-a13b-214c21410162")) (label "I2C_SCL" (at 152.4 193.04 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "adf2fc9a-f2f6-4e4b-b225-6f730a59e4e4")) (label "I2C_SDA" (at 120.65 72.39 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "b4f48aae-2b6b-486d-ad27-ea5457ca11d7")) (label "GNSS_RX" (at 264.16 147.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "b8308930-754f-42cf-be40-52e2c47d1b74")) (label "3V3" (at 30.48 139.7 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "b9d68875-0c47-40bd-8a1c-de116a0d4ab9")) (label "24V_IN" (at 86.36 109.22 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "c0ff9f67-861c-41bb-829d-ae3860a9ca95")) (label "GND" (at 262.89 129.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c3ee8570-80e2-4c2c-a891-7605e115f4c8")) (label "GND" (at 156.21 114.3 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c5ed3f91-8201-4b4b-a79e-a8fb92ae7ecd")) (label "I2C_SDA" (at 31.75 165.1 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c7a04694-cf06-41cb-b45f-ff20f55d5a2f")) (label "GND" (at 111.76 133.35 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "cb58a09b-fa03-497d-8923-6d281b28996b")) (label "PWR_CTRL" (at 161.29 71.12 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d038a487-18e7-445f-afad-6237eeae9c75")) (label "IGN_SENSE" (at 99.06 62.23 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "d06a8d91-b151-40b9-b892-765b90e84413")) (label "24V" (at 77.47 100.33 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "d259386a-57c7-40d7-b690-98d351d65e6a")) (label "I2C_SCL" (at 120.65 69.85 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d59803c4-7bd6-4aac-b99d-6ba6a34d054b")) (label "3V3" (at 50.8 76.2 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "db3fc8b6-339e-4528-8176-7889eb1d6fe7")) (label "GND" (at 99.06 82.55 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "dc006fb4-5606-4bd7-9e24-42bab9cf7459")) (label "BAT_SENSE" (at 25.4 44.45 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "dc7fb61c-325b-4ebe-a2a4-6012b7962668")) (label "GND" (at 63.5 157.48 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "dedd1a47-1ffc-4b72-9483-473681b854cc")) (label "LED_A" (at 177.8 83.82 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e1545961-4552-4c3d-93e5-3a54a4ea23dd")) (label "GND" (at 224.79 100.33 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e50149c2-2635-4a54-8035-7061241e24a8")) (label "I2C_SCL" (at 30.48 149.86 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e51f6442-9e79-4a54-9c27-2cfb93685c19")) (label "GND" (at 114.3 194.31 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e9de4387-b28b-4938-84dc-d8b66ab6d6c8")) (label "3V3" (at 95.25 186.69 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "f2616165-80d4-43c5-9f3b-15f4a1e474ca")) (label "LED_K" (at 264.16 35.56 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f3fce9bf-c840-446b-948d-88d9cf647954")) (label "GND" (at 76.2 140.97 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f5bc25d1-9e26-405b-9a48-aaa0c5c2ab17")) (label "3V3" (at 82.55 173.99 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f6a615c6-844b-4453-9eed-fb3f9e903bb0")) (label "24V_IN" (at 134.62 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f7be1421-fea6-4cbf-8816-75efbf2110a6")) (label "24V" (at 149.86 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "fc4c61e9-8c9f-4486-a87d-51dc0f071e08")) (label "USART1_RX" (at 120.65 52.07 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "fc8a3e3d-429e-43ca-9564-236fe1304818")) (label "BASE_LS" (at 161.29 82.55 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "ffb3a170-9afb-4c6d-9497-9d8f05dffcd8")) (label "SW_IN" (at 161.29 63.5 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "ffbe28ea-b449-482b-97a6-5a989cd444ad")) (symbol (lib_id "Connector_Generic:Conn_01x05") (at 55.88 22.86 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "0108bbc7-5b9d-4e76-a0d0-204d5f7f6d42") (property "Reference" "P1" (at 55.88 14.986 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "GX16-5" (at 55.88 30.226 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" (at 55.88 22.86 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 55.88 22.86 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 55.88 22.86 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "16efdaea-262a-4465-8dcb-48de04d8f250")) (pin "2" (uuid "d42620e5-0154-4a8f-991e-b542c6e3b2a1")) (pin "3" (uuid "1a4d7f04-b825-41ec-a85c-fab750bdd625")) (pin "4" (uuid "f2fe876a-4941-4fc0-b69d-fabc21a47bd8")) (pin "5" (uuid "366dc5b6-ee83-41c3-b293-2006e1bf3936")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P1") (unit 1))))) (symbol (lib_id "Sensor_Temperature:TMP102xxDRL") (at 107.95 156.21 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "01a2809c-e224-4789-8453-a52a956eb63a") (property "Reference" "U4" (at 107.95 143.51 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "TMP102" (at 107.95 142.24 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Footprint" "Package_TO_SOT_SMD:SOT-563" (at 109.3 147.36 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "https://www.ti.com/lit/ds/symlink/tmp102.pdf" (at 109.3 144.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Digital Temperature Sensor, ±3°C, low-Power, SMBus, 12 bit, Two-Wire Serial Interface, SOT-563" (at 108.03 156.25 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "cc5911cc-84cb-494c-b2bc-ed67b0de7856")) (pin "2" (uuid "54d57a0c-09dd-4840-833f-83cd65d3ae4e")) (pin "3" (uuid "9284a6df-2e57-4d2d-84d5-7c007343116d")) (pin "4" (uuid "0d8bd602-293b-48dd-8dd5-e61b89fedc32")) (pin "5" (uuid "9506eee4-800b-4032-8940-28cc7b95d4a1")) (pin "6" (uuid "4e76e10e-2d0c-43b3-8055-703091199cdf")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "U4") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 128.27 128.27 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "032bb60c-39d3-410d-b1a3-b6c34ea80865") (property "Reference" "C10" (at 132.08 128.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF/50V" (at 132.588 130.302 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:CP_Elec_6.3x7.7" (at 129.235 124.46 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 128.27 128.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Polarized capacitor" (at 128.27 128.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "1331d8a5-8b66-4bfb-94c7-f75ccae12763")) (pin "2" (uuid "1c13cba4-4172-41c1-bdda-8c9098cfbf50")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C10") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x04") (at 237.49 149.86 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "13db1034-2695-4354-8bff-fa449b25171e") (property "Reference" "P6" (at 237.49 144.78 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "FAN" (at 237.49 143.51 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" (at 238 150 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 238 150 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 238 150 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "9fdee6d4-8b19-49c6-b28f-7883c4ea50d7")) (pin "2" (uuid "dcf38381-ad5f-4cd3-a6c4-ebd56169f350")) (pin "3" (uuid "3372d350-d215-41e3-a18d-e720b82e5507")) (pin "4" (uuid "79eca317-fb03-4fca-8657-260cb52ef2df")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P6") (unit 1))))) (symbol (lib_id "Device:D_Schottky") (at 218.44 139.7 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "1446dacc-e01f-4b8c-8452-53846218445b") (property "Reference" "D2" (at 218.44 135.89 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "SS34" (at 218.44 134.62 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Diode_SMD:D_SMA" (at 218 140 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 218 140 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Schottky diode" (at 218 140 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "3d78d71e-31ca-47e5-8410-5cedcc4b9e1e")) (pin "1" (uuid "87a404bf-a0ac-44e9-9095-36faf5d58bb2")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D2") (unit 1))))) (symbol (lib_id "power:GND") (at 30.48 54.61 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "14555c01-8a02-4bbb-8897-e31c90351c2c") (property "Reference" "#PWR01" (at 23.114 54.356 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 30.48 50.8 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 30.48 54.61 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "~" (at 30.48 54.61 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 30.48 54.61 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "7ed5821a-3db3-4580-9450-c785f04167c1")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR01") (unit 1))))) (symbol (lib_id "Device:R") (at 160.02 149.86 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "1553e962-8b29-4a74-8e84-005da9055acf") (property "Reference" "Rtp" (at 163.83 149.86 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 163.83 151.13 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 158.222 150 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 160 150 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 160 150 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "699b8824-12d4-439e-9c7e-afc3a49d1d28")) (pin "1" (uuid "42f6b694-1c91-46b3-bcea-1722bb7c8ae1")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rtp") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 96.52 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "2484bb1d-96e8-497c-a824-6524c72721e1") (property "Reference" "PF1" (at 96.52 15.748 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 96.52 20.066 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 96.3 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 96.3 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 96.3 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "4285b2d3-c574-445a-ae5f-381bad44f452")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF1") (unit 1))))) (symbol (lib_id "Device:R") (at 30.48 99.06 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "2555dc13-0a4b-40c0-a5d5-394402530817") (property "Reference" "R7" (at 27.94 99.06 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 33.782 99.06 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 28.702 99.06 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 30.48 99.06 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 30.48 99.06 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "06d05ec6-4008-48a7-9ea5-d5e3bbfd9220")) (pin "2" (uuid "b1b2a1cb-dc0d-4cba-b4a8-16883417ca5d")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R7") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 224.79 95.25 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "26539809-7cfd-4de1-8c82-d80d68723457") (property "Reference" "C3" (at 219.202 95.25 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF" (at 227.584 95.25 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:CP_Elec_6.3x7.7" (at 225.965 91.19 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 225 95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Polarized capacitor" (at 225 95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "b5e34d16-0544-49ff-8d18-231192e31312")) (pin "2" (uuid "9a36d3a5-30dd-4d4f-a621-dcaa614acbea")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C3") (unit 1))))) (symbol (lib_id "Sensor_Humidity:SHT4x") (at 73.66 181.61 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "30ea07c3-9fe8-4631-8864-9f26d2cc3400") (property "Reference" "U3" (at 73.66 174.752 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "SHT40-AD1B" (at 72.644 187.96 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify right))) (property "Footprint" "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" (at 78 175.3 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf" (at 78 172.76 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4" (at 74.19 181.65 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "32d389f4-11f7-49b3-ae5e-75512d155b2e")) (pin "2" (uuid "e682da6b-cecf-4532-b719-3643b9d1f81c")) (pin "3" (uuid "2bdcc34d-1e8d-474d-9b76-dd0a11ac23b4")) (pin "4" (uuid "1094a3d6-c031-429d-8145-d6aa95bb7e76")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "U3") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 125.73 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "3e6bc231-f148-4a41-a779-cc26771abc66") (property "Reference" "PF4" (at 125.73 15.24 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 125.73 22.098 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 125.51 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 125.51 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 125.51 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "95b92132-7328-4107-b812-e2f9a24f531f")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF4") (unit 1))))) (symbol (lib_id "Device:D_Schottky") (at 44.45 76.2 0) (mirror y) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "40072bf4-acbb-4d2d-b7b7-58c48263c3ca") (property "Reference" "D5" (at 44.45 79.248 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "BAT54" (at 44.45 72.898 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Diode_SMD:D_SOD-123" (at 44.14 76.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 44.14 76.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Schottky diode" (at 44.14 76.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "fdf55921-4aa3-40d2-bc94-3a90701e66c8")) (pin "2" (uuid "dfeac1f4-e385-47dd-aef2-97c789ca893b")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D5") (unit 1))))) (symbol (lib_id "Device:R") (at 30.48 109.22 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "4318cfbd-8e36-4d4a-ba69-a56aadf25e99") (property "Reference" "R8" (at 27.686 109.22 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 33.782 109.22 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 28.702 109.22 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 30.48 109.22 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 30.48 109.22 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "e2134bf0-3630-4f0b-a83d-8830190c31b8")) (pin "2" (uuid "e6be58ae-9e7c-4af4-9ac1-d281983a5d7f")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R8") (unit 1))))) (symbol (lib_id "Device:C") (at 43.18 48.26 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "4454568d-6ad4-4db9-9fd7-af20e889d813") (property "Reference" "C5" (at 38.1 48.26 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 45.974 48.26 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 44.145 44.45 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 43.18 48.26 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 43.18 48.26 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "756bc646-a40d-4441-b6cb-2ff7254dc44e")) (pin "2" (uuid "19c05997-8e39-4a72-892c-1e7e1a043f6d")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C5") (unit 1))))) (symbol (lib_id "Device:R") (at 161.29 76.2 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "44654388-d913-4e26-a9a4-6890b99c09fd") (property "Reference" "R1" (at 158.496 76.2 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "1k" (at 164.338 75.946 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 159.172 75.71 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 160.95 75.71 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 160.95 75.71 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "7ccd7cae-5439-40b9-8b51-1eac62b02846")) (pin "2" (uuid "fe38243c-2db2-42bc-b91c-764c644440bb")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R1") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 149.86 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "477f317f-3aed-47b7-be58-ef92dce5b9aa") (property "Reference" "PF6" (at 149.86 15.24 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 135.636 9.652 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 150.08 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 150.08 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 150.08 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "aac6d3dc-7b73-40ec-8206-94e94a11ca6f")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF6") (unit 1))))) (symbol (lib_id "Device:R") (at 31.75 160.02 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "485654eb-2218-4de8-bd8a-daab7c03e4d7") (property "Reference" "R31" (at 27.94 160.02 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "4.7k" (at 35.306 160.02 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 30.442 159.76 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 32.22 159.76 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 32.22 159.76 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "644ee218-a0d9-47a1-9e1b-ed72961a41a1")) (pin "2" (uuid "0b836478-381e-473b-9586-e8832193dca9")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R31") (unit 1))))) (symbol (lib_id "Device:C") (at 114.3 190.5 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "4b458d84-9f80-48dc-b175-ff5cf6385908") (property "Reference" "Cu4" (at 108.458 190.5 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 116.586 190.5 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 114.835 186.92 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 113.87 190.73 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 113.87 190.73 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "96b1d5d3-1741-43bb-8d0f-2f9e6aeddcfc")) (pin "2" (uuid "e8f89b3d-210f-4030-84a4-bb133d2a4c59")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Cu4") (unit 1))))) (symbol (lib_id "Device:Q_NPN_BCE") (at 153.67 106.68 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "54f9824a-b651-48e8-91fa-651d260ccca2") (property "Reference" "Q5" (at 158.242 108.966 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "MMBT3904" (at 158.75 106.68 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 158.17 108.73 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 153.09 106.19 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 153.09 106.19 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "1427feaf-b893-454d-977e-34e0ff8cf97b")) (pin "1" (uuid "72fbe4d6-9e70-4a40-a508-70080eb16f60")) (pin "3" (uuid "25770921-4021-4c9e-81fe-518c6f171433")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q5") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x03") (at 267.97 127 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "599a4f5c-5b15-41e2-ab7e-ccb6545952ee") (property "Reference" "H3" (at 267.97 121.92 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "USART1-RSV (DNP)" (at 267.97 120.65 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical" (at 267.97 127 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 267.97 127 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 267.97 127 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "4eeba337-ae63-4429-9ed6-c1c7c5cd93c3")) (pin "2" (uuid "3d4f9364-36d3-43c6-b6d0-6bdec93be645")) (pin "3" (uuid "8ce07438-caec-4824-85b2-fdad67e6a85b")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "H3") (unit 1))))) (symbol (lib_id "Device:R") (at 36.83 71.12 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "5bd98b1a-5035-4524-bae4-b222e5483f9c") (property "Reference" "Rig" (at 39.624 71.12 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "22k" (at 33.02 71.12 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 35.602 71.2 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 37.38 71.2 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 37.38 71.2 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "90f12c48-9021-45b4-9405-3f495dbd7ebd")) (pin "2" (uuid "0822c453-965b-4608-9a0b-5ed3adafc4a8")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rig") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 134.62 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "5e94c385-9307-4cb3-8207-d99f6d8926e9") (property "Reference" "PF7" (at 134.62 15.24 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 134.366 20.574 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 134.4 19.08 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 134.4 19.08 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 134.4 19.08 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "6b0063c9-2049-421c-83d2-2a2a000d93f8")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF7") (unit 1))))) (symbol (lib_id "Device:R") (at 180.34 55.88 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "60202028-1109-4cbc-8c85-5ee7f203e0fd") (property "Reference" "R2" (at 177.292 55.88 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 183.642 55.88 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 179.092 55.65 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 180.87 55.65 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 180.87 55.65 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "7e5887e5-2e09-4dca-abb0-5b13e70ced93")) (pin "2" (uuid "cb8636f4-803a-499a-b8ae-df09465988c4")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R2") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x20") (at 114.3 59.69 0) (mirror y) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "682f47f8-b6d3-4bad-afff-5029f9fe5818") (property "Reference" "J2" (at 114.3 33.02 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Blackpill-R" (at 117.856 88.138 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical" (at 114 59.52 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 114 59.52 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 114 59.52 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "7" (uuid "feb5b67d-dfa8-4c20-b900-9cdbe28d7ec7")) (pin "9" (uuid "17f84905-0bab-4a97-b60d-4d23edde49c4")) (pin "11" (uuid "c6842658-3273-4c30-9707-2f80d2661471")) (pin "8" (uuid "f0160414-c7d4-4d60-973b-f138d95d8ba9")) (pin "10" (uuid "358c9a9c-01e2-4407-9387-db5ec9d7385c")) (pin "12" (uuid "13225707-0387-40fd-b6a9-13861ef5b223")) (pin "5" (uuid "69f811bc-3b30-4058-8a16-c3955e71f6a4")) (pin "4" (uuid "8ca859ca-7f11-41e8-b904-57f2e616df67")) (pin "6" (uuid "c2202001-b06c-4dd5-8516-bc601327e08e")) (pin "18" (uuid "5ff1766a-a0d7-4989-a694-69b6df6066e2")) (pin "20" (uuid "c4124adb-3d31-4880-8291-e1a1fd08137f")) (pin "19" (uuid "6d100891-b5fb-4be0-905f-8473d79bc4c4")) (pin "3" (uuid "e4b46d7b-57ef-45b0-8ef6-d4c14f81346f")) (pin "2" (uuid "40663611-af2d-4f67-839e-7912381e2d1f")) (pin "14" (uuid "1c17913e-9318-43d9-882d-da367fce896b")) (pin "15" (uuid "f70ee699-7dff-45c7-a21f-2319be44bb53")) (pin "17" (uuid "4b271c7c-475f-46b6-9064-29a6a22a1656")) (pin "13" (uuid "14094bcd-20b6-4334-b709-dc50ca6fa219")) (pin "16" (uuid "26334ac9-bfb0-442f-be73-8886e107c4ec")) (pin "1" (uuid "c08c4c06-6115-4020-a546-26add83a7bdf")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "J2") (unit 1))))) (symbol (lib_id "Device:LED") (at 243.84 33.02 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "6e0f211a-0b29-40d9-8497-573317e3e00f") (property "Reference" "D1" (at 243.84 30.48 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 243.84 29.21 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "LED_SMD:LED_0805_2012Metric" (at 243.84 33.02 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 243.84 33.02 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Light emitting diode" (at 243.84 33.02 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Sim.Pins" "1=K 2=A" (at 243.84 33.02 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "5c0cd227-6287-4748-8429-26496a4b79d2")) (pin "2" (uuid "290a2f8a-396b-442a-b4e4-e5f2485aaf1d")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D1") (unit 1))))) (symbol (lib_id "Device:R") (at 30.48 36.83 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "6febc877-d113-4b7a-b5c0-82fa36190d9a") (property "Reference" "R5" (at 27.432 36.83 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 33.782 36.83 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 29.252 36.98 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 31.03 36.98 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 31.03 36.98 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "4419aa46-7cdb-47c3-891b-5e77d68faa39")) (pin "1" (uuid "c690d8fd-a284-4b42-a489-a53db0eb042e")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R5") (unit 1))))) (symbol (lib_id "Device:C") (at 43.18 109.22 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "70d4610d-4efe-4601-a562-9399c103313d") (property "Reference" "C7" (at 38.608 109.22 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 46.736 109.22 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 44.145 105.41 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 43.18 109.22 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 43.18 109.22 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "145b000b-a20d-472b-82c7-fd739f106c93")) (pin "2" (uuid "acedf807-5bd5-45e0-93d1-e24acf39e1a8")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C7") (unit 1))))) (symbol (lib_id "Device:R") (at 204.47 151.13 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "7698e6c2-1447-4cc7-8254-ea6fd0e421b7") (property "Reference" "Rg" (at 201.168 151.13 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "100R" (at 208.788 151.13 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 202.812 151.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 204.59 151.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 204.59 151.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "85f63abc-2782-4bc4-ae3e-7ad62db2cf11")) (pin "2" (uuid "efe65361-e330-4edf-8f2b-91efaada9951")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rg") (unit 1))))) (symbol (lib_id "Device:R") (at 185.42 106.68 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "78797b55-0f8d-47a6-ae79-2ec4fa8ae937") (property "Reference" "Rled" (at 189.23 106.68 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 189.23 107.95 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 183.642 106.68 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 185.42 106.68 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 185.42 106.68 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "5b3ed759-9a61-4104-9ceb-a02794a3eccc")) (pin "2" (uuid "0c17f5f0-0b6e-48a8-96a8-62cc99308b4d")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rled") (unit 1))))) (symbol (lib_id "Device:R") (at 30.48 144.78 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "8076dc79-9973-4b18-ab17-881e5fed8e90") (property "Reference" "R30" (at 26.924 144.78 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "4.7k" (at 33.782 144.78 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 29.332 144.52 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 31.11 144.52 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 31.11 144.52 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "193cc2c0-1059-48d2-8d09-5364cd028751")) (pin "2" (uuid "cba28973-96c2-4cd7-aadd-320a01b851f5")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R30") (unit 1))))) (symbol (lib_id "power:GND") (at 30.48 115.57 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "830c474e-300b-40c4-9ee4-fabcfec74f5d") (property "Reference" "#PWR04" (at 30.48 109.22 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 30.48 111.76 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 30.48 115.57 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "~" (at 30.48 115.57 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 30.48 115.57 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "30862ee3-7ac4-4580-9f25-dfad99cc5bc0")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR04") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 116.84 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "85243a69-4da1-4573-a80a-bb4ba14ac968") (property "Reference" "PF3" (at 116.84 15.748 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 116.84 13.97 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 117.06 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 117.06 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 117.06 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "068b5959-ecf3-4723-be44-aeed8064ac40")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF3") (unit 1))))) (symbol (lib_id "Device:R") (at 242.57 113.03 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "85f4f5a4-083f-482c-aa2b-95611da08c8e") (property "Reference" "Rdfu" (at 238.76 113.03 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "22k" (at 246.38 113.03 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 240.792 113.03 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 242.57 113.03 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 242.57 113.03 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "168ce06e-b486-4dd6-b7aa-e4a03c6ee547")) (pin "2" (uuid "1b7befa1-162e-4efb-8180-82fc378a5aa0")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rdfu") (unit 1))))) (symbol (lib_id "Device:Q_PMOS") (at 214.63 80.01 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "8d92151e-fb60-4bcd-9974-3c10c7817d60") (property "Reference" "Q1" (at 214.63 72.39 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "AO3401A" (at 214.63 71.12 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 219.71 82.55 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 214.63 80.01 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "P-MOSFET transistor" (at 214.63 80.01 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "G" (uuid "2894d992-549a-4df2-8841-322613a782c4")) (pin "D" (uuid "79451e60-57e0-4392-a364-97c8ba2be003")) (pin "S" (uuid "fb005981-60fa-4c59-bfff-09d4d2843c84")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q1") (unit 1))))) (symbol (lib_id "Device:R") (at 153.67 128.27 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "93a1f29f-d766-4fe2-8f95-6c3415fa2ea2") (property "Reference" "Rgs" (at 150.622 128.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 157.226 128.27 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 151.892 128.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 153.67 128.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 153.67 128.27 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "7564e965-8664-4793-b78b-92f21459fa06")) (pin "1" (uuid "9a8e20d3-26db-4ea2-bd2c-b3eddae4603f")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rgs") (unit 1))))) (symbol (lib_id "Device:C") (at 111.76 127 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "9a18e923-895d-4049-9293-bd63a498d076") (property "Reference" "C11" (at 114.554 127 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 102.87 127 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 112.565 123.19 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 111.6 127 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 111.6 127 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "e86905e6-a20d-4ea2-9421-c390e63013f2")) (pin "2" (uuid "43edf8ba-137a-42f7-9a5b-b78dd3667e51")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C11") (unit 1))))) (symbol (lib_id "Device:C") (at 27.94 80.01 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "9a2cd58c-4828-4017-9c98-e78d67ee128f") (property "Reference" "C9" (at 31.75 80.01 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 31.75 81.28 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 28.485 76.58 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 27.52 80.39 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 27.52 80.39 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "f4489b72-7d75-42ed-a70b-95fe2073fa72")) (pin "2" (uuid "148b41ea-b2fb-496d-a84c-a46c82148171")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C9") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 143.51 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "9dedb572-b894-486c-9598-d60e222cf5f4") (property "Reference" "PF5" (at 143.51 15.24 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 143.51 13.97 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 143.51 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 143.51 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 143.51 19.05 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "8265ba29-dbb0-4918-bf2e-4b2d77f478bf")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF5") (unit 1))))) (symbol (lib_id "Device:Q_NMOS") (at 271.78 104.14 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "a1230757-943d-40eb-9f66-6ca02a536751") (property "Reference" "Q4" (at 276.352 105.156 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "AO3400A" (at 276.352 103.124 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 277.08 106.54 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 272 104 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "N-MOSFET transistor" (at 272 104 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "D" (uuid "558701bd-f2f4-4bba-9782-e9a4811054df")) (pin "G" (uuid "a794c622-e03f-42fc-b858-f01b321a0c0e")) (pin "S" (uuid "5df8d10b-cfba-4aa1-9e27-38509f841857")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q4") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 106.68 19.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "a7c0c74f-7b96-4dd0-b4d8-dc94dcc236c4") (property "Reference" "PF2" (at 106.68 15.748 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 106.68 20.32 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 106.68 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 106.68 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Special symbol for telling ERC where power comes from" (at 106.68 19.56 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "6ebcb99c-db3e-494a-b9b2-40eb8c029c6d")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF2") (unit 1))))) (symbol (lib_id "power:GND") (at 30.48 22.86 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "ab8b41e3-02a0-4bb4-a62a-3a236009a331") (property "Reference" "#PWR02" (at 30.48 16.51 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 30.48 19.05 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 30.48 22.86 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "~" (at 30.48 22.86 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 30.48 22.86 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "632d902c-e8fd-459a-8d9b-6430c95faeee")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR02") (unit 1))))) (symbol (lib_id "Device:D_TVS") (at 59.69 157.48 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "b66fe2ae-0549-4edb-bcce-f968eb1d4731") (property "Reference" "D10" (at 59.69 160.02 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "SMBJ33A" (at 59.69 154.432 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Diode_SMD:D_SMB" (at 59.22 157.67 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 59.22 157.67 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Bidirectional transient-voltage-suppression diode" (at 59.22 157.67 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "3a923731-bd26-44ce-a80d-d7b0d0ed5c30")) (pin "2" (uuid "1744cdb0-b84f-442c-9329-7323564a9f1a")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D10") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x04") (at 157.48 187.96 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "bfbff7b5-f3f9-4ffc-9080-67e0aa9db717") (property "Reference" "P5" (at 157.48 182.88 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "TEMP_PROBE" (at 157.48 181.61 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" (at 158 188 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 158 188 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 158 188 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "3" (uuid "0c475bae-7e7b-4bb6-b41b-4314ce4f93a9")) (pin "4" (uuid "1c9fec2f-89b0-4351-b36d-051ddcd23e33")) (pin "1" (uuid "17f09300-1e8f-4627-8ace-395b4f3a721a")) (pin "2" (uuid "942455e2-8b8a-4214-891f-099b116fbef6")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P5") (unit 1))))) (symbol (lib_id "Device:C") (at 95.25 190.5 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "c12a1c5e-4852-4300-9f1e-36ce9beb9704") (property "Reference" "Cu3" (at 88.9 190.5 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 97.282 190.5 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 95.965 186.19 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 95 190 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Unpolarized capacitor" (at 95 190 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "dc452028-aaca-42cb-8a39-3ac0e5adaceb")) (pin "2" (uuid "58d89d1f-7f25-41eb-bd0f-2be2240206cc")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Cu3") (unit 1))))) (symbol (lib_id "power:GND") (at 27.94 83.82 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "c5330d88-e9f5-468f-9bc5-3d12703297e3") (property "Reference" "#PWR03" (at 27.94 77.47 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 27.94 80.01 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 27.94 83.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "~" (at 27.94 83.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "" (at 27.94 83.82 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "049794b5-d360-46b7-859c-024702b7cd80")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR03") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x02") (at 72.39 17.78 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "cbecc10d-3a80-4792-908f-1a8bc8c477b7") (property "Reference" "P2" (at 72.39 14.732 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "5V-IN-SD15B05" (at 72.39 23.114 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (at 72.39 17.78 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 72.39 17.78 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 72.39 17.78 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "88ca521a-97ab-4946-8e3b-c4dc3d4854c2")) (pin "2" (uuid "55f59f69-c57c-490a-bfc5-8b04697ab7cc")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P2") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x04") (at 269.24 142.24 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "cc81530d-c86e-43aa-816b-51b6b5004aa6") (property "Reference" "P3" (at 269.24 137.16 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "RTK2B-UART1 (DNP — harness alt)" (at 269.24 135.89 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" (at 269.24 142.24 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 269.24 142.24 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 269.24 142.24 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "4b45c1ab-f760-494e-852e-c6a163f9c7b8")) (pin "2" (uuid "b8f53d59-f7bf-4bd3-8571-17ce56fc7ddc")) (pin "3" (uuid "4bbcba30-ce02-49ab-885e-2c99d8187108")) (pin "4" (uuid "bd2e6ef1-f901-4df9-8bca-f881524a86f5")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P3") (unit 1))))) (symbol (lib_id "Device:Polyfuse") (at 161.29 57.15 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "d2cddde5-6919-4d00-bf21-82f62c607400") (property "Reference" "F1" (at 158.242 57.15 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PPTC 3A" (at 166.878 57.15 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Fuse:Fuse_1812_4532Metric" (at 162.22 52.22 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 160.95 57.3 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resettable fuse, polymeric positive temperature coefficient" (at 160.95 57.3 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "3094d434-c948-4256-8dca-10dfd86293bf")) (pin "2" (uuid "8dc9366c-35ff-475b-8c87-d7a0c7fec4f1")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "F1") (unit 1))))) (symbol (lib_id "Device:R") (at 76.2 134.62 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "d80aba5d-088c-41ff-9acf-6f61bcd96d3a") (property "Reference" "Rrp" (at 79.248 134.62 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 72.898 134.62 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 74.662 134.46 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 76.44 134.46 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 76.44 134.46 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "bf89b073-a441-4145-b73c-8cf1445c03d0")) (pin "2" (uuid "de771322-d9fe-40b9-a0a0-601dcf35380a")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rrp") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x20") (at 105.41 59.69 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "d8e3c98e-06a5-4587-afa4-e50d91724aab") (property "Reference" "J1" (at 105.41 33.02 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "Blackpill-L" (at 101.6 87.884 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical" (at 105.03 59.15 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 105.03 59.15 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 105.03 59.15 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "11" (uuid "02e83de2-be44-4eb7-b9d5-4334e2e0bf44")) (pin "12" (uuid "f0bfd4dc-9f13-48e6-ab11-92720866b11f")) (pin "13" (uuid "b92ffc37-1988-40c7-bf2f-057a66f07016")) (pin "14" (uuid "452f823b-94d8-4e54-b631-fcca79292965")) (pin "15" (uuid "28624f5c-6791-4adc-ae02-d11d25586f87")) (pin "16" (uuid "21121965-d55c-4aa2-92c1-e04194768b76")) (pin "17" (uuid "b54e6c7b-5614-4cf7-a834-0fbfb307ae78")) (pin "18" (uuid "90eed9fa-a58d-443c-8638-62f6826db0b7")) (pin "19" (uuid "0660da7c-c8c5-4aa2-8ce3-1c30c5c65597")) (pin "20" (uuid "fad5ef04-9800-4081-a16d-9c750e1aafc4")) (pin "3" (uuid "95c0389c-30f7-4fcb-a18f-c44eac8fbb23")) (pin "4" (uuid "1fa38abc-130d-4983-9de3-4ee0daa8df47")) (pin "5" (uuid "7a7c6347-02c8-4bb5-b3d9-d81d8e047be6")) (pin "6" (uuid "5d4d224f-792d-43d6-aa88-2bf91f4d4834")) (pin "7" (uuid "d44d5396-5588-47fd-adee-b0d49feb60ab")) (pin "8" (uuid "29600f0d-e7ed-4283-8fa5-b86ecc24eb7b")) (pin "10" (uuid "1ad6e8c8-c9e8-4dce-bbdf-d144289eac4d")) (pin "9" (uuid "b5d514e3-dfee-4591-80b9-ddcc04c2d9ba")) (pin "1" (uuid "36b810e8-24fb-4f9a-8c1e-92c644a26d7d")) (pin "2" (uuid "a872d38d-48ce-4fc4-839d-90e1d60aa7b0")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "J1") (unit 1))))) (symbol (lib_id "Device:R") (at 177.8 76.2 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "dd1f6817-8235-47c0-aac4-dc44fbecdf60") (property "Reference" "R3" (at 174.498 76.2 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "1k" (at 181.102 76.2 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 176.242 76.16 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 178.02 76.16 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 178.02 76.16 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "db88c6e6-0c8b-4ed8-952e-cdb630ded3a0")) (pin "2" (uuid "09f835d6-afde-468a-81d5-fcc00cd2392d")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R3") (unit 1))))) (symbol (lib_id "Device:D_Zener") (at 81.28 100.33 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "e200e9b2-4536-4e22-b8c3-1ea4012d0549") (property "Reference" "DzG" (at 81.28 103.632 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "BZX84C15" (at 81.28 96.774 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 81.52 99.95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 81.52 99.95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Zener diode" (at 81.52 99.95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "5b630afd-d7b0-45de-8b55-3494de701269")) (pin "2" (uuid "a5f0b60d-e287-42c2-aeb0-07ffebcb85d9")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "DzG") (unit 1))))) (symbol (lib_id "Device:R") (at 30.48 48.26 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "e3e3de1a-9deb-4176-8099-c323b1f76bad") (property "Reference" "R6" (at 27.94 48.26 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 33.528 48.26 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 29.252 48.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 31.03 48.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 31.03 48.82 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "83d7b61b-bad8-484e-a9e3-359abccee5a6")) (pin "1" (uuid "d2113bb8-c7d7-40f3-bbb6-857051859415")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R6") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x02") (at 276.86 33.02 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "ea0a13a6-5173-40ae-b75c-76f7be6be64d") (property "Reference" "P8" (at 276.86 30.48 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "PANEL_LED" (at 276.86 38.862 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (at 276.86 33.02 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 276.86 33.02 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 236.22 9.906 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "6f3abc59-4e84-499f-84b1-4748a1a8e7f9")) (pin "2" (uuid "5b45105d-9acf-4bb3-8f57-215834b15a15")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P8") (unit 1))))) (symbol (lib_id "Device:Q_NMOS") (at 205.74 121.92 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "efaa6614-fd47-4e18-a26d-7ef501ce1b02") (property "Reference" "Q2" (at 210.82 123.19 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "AO3400A" (at 210.82 121.412 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 211.43 124.6 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 206.35 122.06 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "N-MOSFET transistor" (at 206.35 122.06 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "D" (uuid "e444b702-9468-40f3-ba8e-1cab63c1e425")) (pin "G" (uuid "44f35579-e3b3-44e5-a65c-826e3cd2695e")) (pin "S" (uuid "9fe5c18d-fd5f-4f23-a127-32585ebcb3ca")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q2") (unit 1))))) (symbol (lib_id "Device:R") (at 179.07 146.05 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "f2219343-8816-4b76-a6c5-7e65c33efb4e") (property "Reference" "Rts" (at 182.88 146.05 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Value" "1k" (at 182.88 147.32 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 177.842 145.95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 179.62 145.95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "Resistor" (at 179.62 145.95 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "db2ddd1c-613c-4372-a545-9df7e780a88c")) (pin "2" (uuid "ca9b4185-b25d-4e35-a955-136739b0811f")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rts") (unit 1))))) (symbol (lib_id "Device:Q_PMOS") (at 83.82 115.57 0) (unit 1) (body_style 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (in_pos_files yes) (dnp no) (uuid "fcb3721a-452e-4292-9c5f-019bc1366485") (property "Reference" "Q10" (at 88.646 117.602 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "IRFR5305" (at 88.646 115.57 0) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Package_TO_SOT_SMD:TO-252-2" (at 89.38 118.65 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Datasheet" "" (at 84.3 116.11 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (property "Description" "P-MOSFET transistor" (at 84.3 116.11 0) (hide yes) (show_name no) (do_not_autoplace no) (effects (font (size 1.27 1.27)))) (pin "D" (uuid "56b814bf-8719-404d-8165-43c1f22ebfe9")) (pin "G" (uuid "c8f159cf-4f33-4ac3-83bb-f33d46c0ec5f")) (pin "S" (uuid "2074fc01-d5e1-4688-a763-25d1319d8270")) (instances (project "hbox-watchdog-v3" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q10") (unit 1))))) (group "" (uuid "15fee2fc-7879-496f-84bc-6cf4ed954311") (members "05abfa74-741d-4890-921b-124eb7650f57" "06c3a53f-9def-4275-a30f-3fb760e89331" "13e41618-7145-47e2-9575-b5816182623c" "14de54e1-b8a5-4d8d-a351-77eebd72381d" "1d5656dc-e27c-441a-a8db-5c8a89da32c9" "253305d5-99e0-4d6b-8e08-c1f6711de525" "283163fd-b650-4716-953f-363d526d8aa1" "2c96de3b-c87e-4648-a4de-adb0d310b25a" "2df77661-1a0c-4d05-94dd-d2fca60bda73" "2f3d61ad-fce6-4b87-a59f-dab759e66659" "30802635-43c6-412b-891e-3e3b553ff2b8" "3782fc93-2fd9-47ba-ae0d-6910be6231a3" "38d3ce50-a8e7-45c6-9f1f-8969a929e2d5" "3ccf7ecb-75c3-4506-a5c9-8c8793666228" "412e002c-f046-4bcb-a409-11b8be8e2cba" "4d1c3ee0-a05c-4f75-b413-012265da5b55" "5106f0a6-0988-49be-98a6-2c2a78305c07" "5213793d-531b-47df-8cea-bac40ff57967" "53203ae8-44c9-4d18-bed6-1602485431a1" "5dddf7b9-d4ae-4e8b-83ff-485e36e23b6f" "61b911e0-14fe-4ed1-b311-dd2d324c792c" "682f47f8-b6d3-4bad-afff-5029f9fe5818" "6f128d49-ffcb-4d7a-8ea2-e7ac83a6bcd9" "7279ae0b-eecc-4601-a5cf-016baa5cf530" "7721c000-5374-4e7e-9234-ab22c30410b3" "7e1082dc-6f20-44c3-9d7d-64da397ac623" "7f2e370d-1e8d-4b6c-9046-77e41321cf05" "80bd8bab-4a4e-4ecc-9e39-4715780ab3a1" "818aaeb6-7779-4eec-ab0c-6d6f87454b59" "8642574e-c692-46c1-8a86-98c8c23e6aec" "87e7c44e-5d3f-4832-a73e-462782cc36a9" "88cb4fd7-9e90-4142-9eeb-f9fca5ded373" "89ce46fb-c44a-4833-b661-3ced15c6060c" "89f39584-9ed2-4807-bd80-bb62a3fbc19d" "8aa5f603-1a89-46a5-9eed-59b17669426f" "8f1d9d24-c6c0-4f82-bf40-710c85f5bbfa" "8f22ba7c-0945-4c59-8379-f2f59cfb30c3" "940f9b36-d890-4d0d-bd4a-59cc06c514b2" "9b5fe168-5e98-4138-b2ae-c6c6e8daaa68" "9c00703d-3ba5-4bd5-8494-283efdc67101" "a1724d4f-b5f5-4ead-9cf6-63ad2c55701f" "a4b49458-e33c-4d95-bca6-857491d371a6" "a5205e00-e7e2-4b93-af7a-c4adc156f3bb" "a97e84cd-482e-42cc-9939-cd43c1ab16f7" "ab7c1371-b11a-4347-9be2-62443c929726" "b296d711-b9dc-414f-9cfa-78246c1a741d" "b4f48aae-2b6b-486d-ad27-ea5457ca11d7" "c5113b38-1987-4de3-8726-5799dc709afc" "c67609af-5636-41b3-b0b4-f2a47446e28a" "d06a8d91-b151-40b9-b892-765b90e84413" "d2951a90-8039-4bbc-9ffe-947751ddda96" "d59803c4-7bd6-4aac-b99d-6ba6a34d054b" "d71e6c5e-4bba-4e68-a0eb-badab8b4aa5b" "d8e3c98e-06a5-4587-afa4-e50d91724aab" "db567d29-a47a-4f17-aea7-70a29c513b02" "dc006fb4-5606-4bd7-9e24-42bab9cf7459" "e7bc2b41-ed79-46c4-b9a8-2b6f6db42204" "ed2d54ef-41af-4085-b217-727c441d4fd1" "f81f9913-c4c8-4762-ad5c-179acf8df48a" "f9fa77e5-c7b7-4aea-897c-0e2dc6b5e105" "fc8a3e3d-429e-43ca-9564-236fe1304818")) (group "" (uuid "6e00c5a9-e0b1-46c1-8c2d-38139eb8c46d") (members "155f3dd3-a422-4d5c-bab8-0476605c7f21" "2e013394-2da9-4b13-9b45-d920ad7ce7de" "a7c0c74f-7b96-4dd0-b4d8-dc94dcc236c4")) (group "" (uuid "a2871799-8439-4562-9fc6-cfe73647aa95") (members "2484bb1d-96e8-497c-a824-6524c72721e1" "a404377f-d45a-40f4-9367-da91b866738d")) (group "" (uuid "a3aae7b2-f249-445a-b9b0-a1d0eb372120") (members "060cfd85-b01d-4dcd-8ea3-5e8f6cfc246d" "6f75153d-b269-42e1-98c0-4fc39a37ce54" "85243a69-4da1-4573-a80a-bb4ba14ac968")) (symbol (lib_id "Switch:SW_Push") (at 300 110 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "0cf79638-84d8-4469-95d8-2d92bcbca615") (property "Reference" "SW1" (at 299.72 107.95 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "RESET" (at 299.72 113.03 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Button_Switch_THT:SW_PUSH_6mm" (at 300.0 115.08 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 300.0 115.08 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "SW1") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x02") (at 300 128 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "672d7489-ac29-41f0-b29c-26f631f47415") (property "Reference" "P10" (at 299.72 125.73 0) (effects (font (size 1.27 1.27)))) (property "Value" "RESET-EXT" (at 299.72 130.81 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (at 300.0 128.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 300.0 128.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "P10") (unit 1))))) (label "NRST" (at 294.92 110.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "b9436908-9204-4b15-bc79-cc04eb489f81")) (label "GND" (at 305.08 110.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "7d80ad73-ae87-436e-b382-3b29d170c3fc")) (label "NRST" (at 294.92 128.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "7aad7216-4750-4aaf-b13c-437cd46b5607")) (label "GND" (at 294.92 130.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "302c8709-9098-4ca2-91d4-e38023c6a624")) (label "NRST" (at 100.33 46.989999999999995 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e8252ab0-4221-42b0-b356-7e61e73d2a62")) (symbol (lib_id "Device:R") (at 300 32 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "0f1ec93e-fae5-4fbf-af4f-341677378909") (property "Reference" "RB1" (at 297.18 31.75 0) (effects (font (size 1.27 1.27)))) (property "Value" "330R" (at 302.26 31.75 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 298.222 32.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 300.0 32.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "RB1") (unit 1))))) (symbol (lib_id "Device:LED") (at 315 32 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "075694af-1550-45ec-bd39-b01d921a3e89") (property "Reference" "DB1" (at 314.96 29.21 0) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 314.96 34.29 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "LED_SMD:LED_0805_2012Metric" (at 315.0 32.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 315.0 32.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "DB1") (unit 1))))) (symbol (lib_id "Device:R") (at 300 50 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "ec980939-7314-4d25-88ad-6e654476a4ea") (property "Reference" "RB2" (at 299.72 46.99 0) (effects (font (size 1.27 1.27)))) (property "Value" "330R" (at 299.72 52.07 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 298.222 50.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 300.0 50.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "RB2") (unit 1))))) (symbol (lib_id "Device:LED") (at 315 50 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "36a3bee1-3a58-44f9-b6ff-a552d8955561") (property "Reference" "DB2" (at 314.96 46.99 0) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 314.96 52.07 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "LED_SMD:LED_0805_2012Metric" (at 315.0 50.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 315.0 50.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "DB2") (unit 1))))) (symbol (lib_id "Device:R") (at 300 68 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "17f6a5cf-6d8e-402e-9967-b8a036caf780") (property "Reference" "RB3" (at 299.72 66.04 0) (effects (font (size 1.27 1.27)))) (property "Value" "330R" (at 299.72 71.12 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 298.222 68.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 300.0 68.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "RB3") (unit 1))))) (symbol (lib_id "Device:LED") (at 315 68 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "c5bd65a2-6622-4d6d-b84b-327eb8f5b2f4") (property "Reference" "DB3" (at 314.96 66.04 0) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 314.96 71.12 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "LED_SMD:LED_0805_2012Metric" (at 315.0 68.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 315.0 68.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "DB3") (unit 1))))) (symbol (lib_id "Device:R") (at 300 86 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "754a18fd-7854-4a98-9a4c-cfcdacba5676") (property "Reference" "RB4" (at 299.72 83.82 0) (effects (font (size 1.27 1.27)))) (property "Value" "330R" (at 299.72 88.9 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 298.222 86.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 300.0 86.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "RB4") (unit 1))))) (symbol (lib_id "Device:LED") (at 315 86 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "4b34adbb-9cd4-4540-91a6-c073c1367e91") (property "Reference" "DB4" (at 314.96 83.82 0) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 314.96 88.9 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "LED_SMD:LED_0805_2012Metric" (at 315.0 86.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 315.0 86.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "DB4") (unit 1))))) (label "BATLED1" (at 300.0 28.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0ac3539d-9202-485f-99e2-dc4f56ca30df")) (label "BLED1" (at 300.0 35.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "21996d32-1670-4137-8e26-58f2d07370fa")) (label "GND" (at 311.19 32.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9ce89499-5cd3-44d4-80d5-fafe1ea89329")) (label "BLED1" (at 318.81 32.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "8e8e8868-2f83-4752-afda-9736eebbda7a")) (label "BATLED2" (at 300.0 46.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "20fb3fe1-023b-4772-aa5c-c3a98db1d27f")) (label "BLED2" (at 300.0 53.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "75f0afa8-2ae9-4395-8060-df1944165a96")) (label "GND" (at 311.19 50.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "65d16ff8-d594-4620-afc2-312d4b2e49f2")) (label "BLED2" (at 318.81 50.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "1686b4e8-e4a7-4c13-a6e2-f2eca8e9e854")) (label "BATLED3" (at 300.0 64.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c9cfb60b-a52f-443c-86c7-eb4847996a6b")) (label "BLED3" (at 300.0 71.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "c38c09ec-8c62-4e48-b6e3-9a00974452c3")) (label "GND" (at 311.19 68.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a7431973-42f6-4c4f-bbe3-56da39d0bd2e")) (label "BLED3" (at 318.81 68.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "c3737010-50e8-48c1-a575-d82d05679467")) (label "BATLED4" (at 300.0 82.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "ea33067c-173f-44c7-aec7-910a98c5e597")) (label "BLED4" (at 300.0 89.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "08eef911-a217-459e-8340-7b30c4f49ca0")) (label "GND" (at 311.19 86.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "285629dd-6d20-4894-a0bf-7910c3194507")) (label "BLED4" (at 318.81 86.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "9f66af7a-da70-423e-ad2a-b5d6503059f7")) (label "BATLED1" (at 119.38 36.83 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "64e9f680-b230-441f-87a1-e8643c36021c")) (label "BATLED2" (at 119.38 39.37 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a9088140-7ea6-4094-8482-288edd18b574")) (label "BATLED3" (at 119.38 41.91 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "72bc7a9b-7876-49d9-ab49-7b50dedb14e8")) (label "BATLED4" (at 119.38 44.449999999999996 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "cad462f2-8dd0-4b59-9578-e94238f0ed94")) (label "24V" (at 119.38 223.51999999999998 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "18fb0c8d-f4d4-4e08-80f7-42867234eac3")) (label "SW_FAN" (at 134.62 226.06 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "130fa05a-02db-4240-8be6-23c1a234004c")) (label "FB_FAN" (at 119.38 231.14 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "815e6e77-7b45-4340-b52a-5887fa498e93")) (label "COMP_FAN" (at 119.38 233.68 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "406ce610-4eef-4b80-a286-861bee5d7ba2")) (label "FREQ_FAN" (at 119.38 228.6 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "d98f9c03-342c-44dd-9ce6-b217c9046dd4")) (label "EN_FAN" (at 119.38 226.06 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "2bbf49dc-e2d7-49d6-902c-17bca1b64552")) (label "BST_FAN" (at 134.62 223.51999999999998 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a0ca0b37-82ef-4351-96d9-8078dc1eba6d")) (label "GND" (at 127.0 238.76 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e1b794fd-9fc9-40bf-adc6-717fa85335c2")) (symbol (lib_id "Device:C") (at 101.6 228.6 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "36012a7d-9c67-4909-96f5-e3af11c29e79") (property "Reference" "C22" (at 99.06 228.6 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "22uF/50V" (at 104.14 228.6 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_1210_3225Metric" (at 102.565 224.79 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 101.6 228.6 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C22") (unit 1))))) (symbol (lib_id "Device:R") (at 101.6 215.9 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "ce46626d-3f8d-41c0-b5b3-38f5530498d6") (property "Reference" "Ren1" (at 101.6 213.36 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 101.6 218.44 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 99.822 215.9 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 101.6 215.9 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Ren1") (unit 1))))) (symbol (lib_id "Device:R") (at 101.6 241.3 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "7e93d10d-ed9d-4790-bfa7-54e73595efdc") (property "Reference" "Ren2" (at 101.6 238.76 0) (effects (font (size 1.27 1.27)))) (property "Value" "20k" (at 101.6 243.84 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 99.822 241.3 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 101.6 241.3 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Ren2") (unit 1))))) (symbol (lib_id "Device:R") (at 88.9 215.9 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "90e83e2f-1be7-42fc-911c-422cb1fd2a18") (property "Reference" "Rcomp" (at 88.9 213.36 0) (effects (font (size 1.27 1.27)))) (property "Value" "40.2k" (at 88.9 218.44 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 87.122 215.9 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 88.9 215.9 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rcomp") (unit 1))))) (symbol (lib_id "Device:C") (at 88.9 228.6 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "ee7a5685-bfb6-4fc1-b8bd-332f7991749e") (property "Reference" "Ccomp" (at 88.9 226.06 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2nF" (at 88.9 231.14 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 89.865 224.79 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 88.9 228.6 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Ccomp") (unit 1))))) (symbol (lib_id "Device:R") (at 88.9 241.3 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "7b3eb52c-3d02-4767-ad81-647c350e39f9") (property "Reference" "Rfreq" (at 88.9 238.76 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 88.9 243.84 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 87.122 241.3 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 88.9 241.3 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rfreq") (unit 1))))) (symbol (lib_id "Device:C") (at 139.7 215.9 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "c174c690-ab96-4f36-9060-5b212443a30a") (property "Reference" "Cbst" (at 139.7 213.36 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "10nF" (at 139.7 218.44 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 140.665 212.09 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 139.7 215.9 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Cbst") (unit 1))))) (symbol (lib_id "Device:D_Schottky") (at 139.7 241.3 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "dfe23957-a87d-4d76-bfd5-a89bd95bb431") (property "Reference" "Dbk" (at 139.7 238.76 0) (effects (font (size 1.27 1.27)))) (property "Value" "SS34" (at 139.7 243.84 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Diode_SMD:D_SMA" (at 139.7 241.3 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 139.7 241.3 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Dbk") (unit 1))))) (symbol (lib_id "Device:L") (at 152.4 228.6 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "f89c0e54-d73a-4b33-986a-23ec923edc55") (property "Reference" "L2" (at 152.4 226.06 0) (effects (font (size 1.27 1.27)))) (property "Value" "10uH" (at 152.4 231.14 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" (at 152.4 228.6 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 152.4 228.6 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "L2") (unit 1))))) (symbol (lib_id "Device:C") (at 165.1 228.6 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "267d7d8a-6cef-4b23-a846-aee05a175862") (property "Reference" "C23" (at 165.1 226.06 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "22uF/16V" (at 165.1 231.14 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 166.065 224.79 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 165.1 228.6 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C23") (unit 1))))) (symbol (lib_id "Device:R") (at 177.8 222.25 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "a2b3658d-fc41-49f8-8029-418889c4bd0b") (property "Reference" "R20" (at 177.8 219.71 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 177.8 224.79 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 176.022 222.25 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 177.8 222.25 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R20") (unit 1))))) (symbol (lib_id "Device:R") (at 177.8 238 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "04642c30-c969-4c1c-88c9-a65a8dc698f5") (property "Reference" "R21" (at 177.8 234.95 0) (effects (font (size 1.27 1.27)))) (property "Value" "19.1k" (at 177.8 240.03 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 176.022 238.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 177.8 238.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R21") (unit 1))))) (symbol (lib_id "Jumper:SolderJumper_2_Open") (at 190.5 228.6 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "d9dd9b5f-4e83-435b-a956-d7b65d6c6959") (property "Reference" "JP1" (at 190.5 226.06 0) (effects (font (size 1.27 1.27)))) (property "Value" "0R" (at 190.5 231.14 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" (at 190.5 228.6 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 190.5 220.98 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "JP1") (unit 1))))) (label "24V" (at 101.6 224.79 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e909b2b8-3089-46c9-b256-a0aeb9082473")) (label "GND" (at 101.6 232.41 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "02ae5d6e-11ff-438e-b056-5c898afaceb6")) (label "24V" (at 101.6 212.09 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "5e56eba8-5ad5-4b60-8a8d-acd97b7894cd")) (label "EN_FAN" (at 101.6 219.71 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "953de89d-bee9-45bd-a93f-58de4b9d8da9")) (label "EN_FAN" (at 101.6 237.49 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0b0ff1a1-d279-4126-9eb7-e21c89728ef5")) (label "GND" (at 101.6 245.11 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0297e269-e578-4487-b13a-c0a76dcac7c3")) (label "COMP_FAN" (at 88.9 212.09 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9d3ed70e-3110-4d06-8d22-e489ab49f27c")) (label "CC_FAN" (at 88.9 219.71 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "fac4daea-7f3b-49f4-9814-b5423af0b7f1")) (wire (pts (xy 88.9 224.79) (xy 88.9 219.71)) (stroke (width 0) (type default)) (uuid "c75eec39-70f5-4dd4-8972-24cdb7c40962")) (label "GND" (at 88.9 232.41 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d713d6d3-9083-48e2-816f-f43fd3404b15")) (label "FREQ_FAN" (at 88.9 237.49 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "ce331318-fb82-4ae3-8960-d6aff6472cc5")) (label "GND" (at 88.9 245.11 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "52146e2c-e76f-425a-b8ed-8ae65ea28ad2")) (label "BST_FAN" (at 139.7 212.09 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "798eac46-5c46-4cb0-a0f1-b8dc8c16c0b3")) (label "SW_FAN" (at 139.7 219.71 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d9ff3a4b-fbaa-4521-989a-4a3829dee85c")) (label "SW_FAN" (at 135.89 241.3 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "2d12200c-2edf-4cd9-b426-05cf0fe86c37")) (label "GND" (at 143.51 241.3 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0ad30750-4220-48ed-9b08-507812b0dc01")) (wire (pts (xy 152.4 224.79) (xy 139.7 219.71)) (stroke (width 0) (type default)) (uuid "06dbe403-879a-4cad-b0ea-9cadf220bf40")) (label "5V_FAN" (at 152.4 232.41 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0419f264-c460-42fb-b103-3b8131a03ad3")) (label "5V_FAN" (at 165.1 224.79 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "59100dfc-0c10-4431-87ac-52ef1f44f5f6")) (label "GND" (at 165.1 232.41 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "3c155520-3f87-4ebf-a3c9-a214c343708f")) (label "5V_FAN" (at 177.8 218.44 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "550a95e5-aca7-4027-9a1e-067b0ce8aaeb")) (label "FB_FAN" (at 177.8 226.06 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d921ea8f-b8f4-47e6-bf1a-49a1cbe0d94d")) (wire (pts (xy 177.8 234.19) (xy 177.8 226.06)) (stroke (width 0) (type default)) (uuid "44d39bf5-fe60-430f-811a-92bb2f7f93c9")) (label "GND" (at 177.8 241.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0eb8a2b7-1870-45b0-8047-a7cb1f9d2e4b")) (label "5V_FAN" (at 185.42 228.6 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c31dea4e-0b51-4aaf-aac2-83dfbbd6f3b8")) (label "24V" (at 119.38 223.51999999999998 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "682e617d-f10d-4c69-b2c2-5cfc74fa1a6d")) (label "SW_FAN" (at 134.62 226.06 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "4c1e8f34-e991-405f-8261-5d8a6ae8aca1")) (label "FB_FAN" (at 119.38 231.14 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3a290412-65f9-49d1-aff9-12e40fa5c1f1")) (label "COMP_FAN" (at 119.38 233.68 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "372d7c6e-8478-4376-add2-5b1d953ca063")) (label "FREQ_FAN" (at 119.38 228.6 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c78d28bf-a7ed-41b1-9c82-bdebbe7c6588")) (label "EN_FAN" (at 119.38 226.06 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8ec516b8-5ad4-448c-8a7f-628b6ea685fe")) (label "BST_FAN" (at 134.62 223.51999999999998 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e4e9cee0-afed-447c-8abf-a8690a3a388c")) (label "GND" (at 127.0 238.76 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ba6faa05-15ae-4824-bf0e-2a4ed37665c5")) (symbol (lib_id "Drogheda-sym:MP1584EN") (at 127 228.6 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "18efa277-37f2-4004-b275-ae98e7a847f7") (property "Reference" "U2" (at 129.54 228.6 0.0) (effects (font (size 1.27 1.27)))) (property "Value" "MP1584EN" (at 127.0 226.06 0.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" (at 127.0 223.52 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 127.0 220.98 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "U2") (unit 1))))) (label "VEH5V" (at 67.31 17.78 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8a6c40e7-ee6f-4cf7-831d-a2ddaa114f16")) (label "VEH5V" (at 30.48 95.25 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "b7a59cd9-e55d-4889-8eff-c609e423ae85")) (label "SYS5V" (at 161.29 53.339999999999996 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "1b91f48e-bff3-41ba-aa3a-ef18b9725493")) (label "SYS5V" (at 180.34 59.690000000000005 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ef014c57-513d-403b-9649-64049e7662a5")) (label "SYS5V" (at 100.33 85.09 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "bdc2d3d5-de24-409d-b920-1ddec1c896c2")) (label "SYS5V" (at 119.38 80.00999999999999 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "7b6c3a10-1862-4db8-9471-fdba513628f2")) (label "VEH5V" (at 195.58 228.6 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2a3cbbcf-b3df-4a03-ab75-74cccad50200")) (symbol (lib_id "Connector_Generic:Conn_01x03") (at 35.56 17.78 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "af9f65f9-fd8c-4aaf-be3f-e1bf8e4bbc26") (property "Reference" "P4" (at 35.56 12.7 0) (effects (font (size 1.27 1.27)))) (property "Value" "BATT-1S4P+NTC" (at 35.56 22.86 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" (at 35.56 17.78 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 35.56 17.78 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "P4") (unit 1))))) (symbol (lib_id "Drogheda-sym:LTC4040EUFD") (at 290 215 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "16aae149-871a-4c14-938f-9da627a3251c") (property "Reference" "U6" (at 289.56 212.09 0) (effects (font (size 1.27 1.27)))) (property "Value" "LTC4040EUFD" (at 289.56 217.17 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" (at 290.0 209.92 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 290.0 207.38 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "U6") (unit 1))))) (symbol (lib_id "Device:R") (at 248 172 90) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "e0246099-52be-43fe-9a8e-614e2d10715f") (property "Reference" "RS1" (at 247.65 168.91 0) (effects (font (size 1.27 1.27)))) (property "Value" "8mR/1%" (at 247.65 173.99 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_1206_3216Metric" (at 248.0 173.778 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 248.0 172.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "RS1") (unit 1))))) (symbol (lib_id "Drogheda-sym:AO4406A") (at 250 186 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "c071eb4d-93f8-4af8-8260-596cec32cb2d") (property "Reference" "Q7" (at 250.19 182.88 0) (effects (font (size 1.27 1.27)))) (property "Value" "AO4406A" (at 250.19 187.96 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (at 250.0 180.92 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 250.0 178.38 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Q7") (unit 1))))) (symbol (lib_id "Device:C") (at 228 196 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "389ffbbb-c267-48d2-9dbe-7e9224e9dd56") (property "Reference" "C30" (at 228.6 193.04 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "10uF" (at 228.6 198.12 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 228.965 192.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 228.0 196.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C30") (unit 1))))) (symbol (lib_id "Device:C") (at 238 196 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "5ea4a987-16dc-4456-9ee8-0ab1e9b6b8d9") (property "Reference" "C31" (at 237.49 193.04 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2uF" (at 237.49 198.12 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 238.965 192.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 238.0 196.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C31") (unit 1))))) (symbol (lib_id "Device:R") (at 228 210 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "831000c2-b4f9-4b2f-8564-21f7be1c9ff6") (property "Reference" "R51" (at 228.6 207.01 0) (effects (font (size 1.27 1.27)))) (property "Value" "287k/1%" (at 228.6 212.09 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 226.222 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 228.0 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R51") (unit 1))))) (symbol (lib_id "Device:R") (at 228 222 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "81d0dafb-9504-49f7-b3aa-8568a46c673c") (property "Reference" "R52" (at 228.6 219.71 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k/1%" (at 228.6 224.79 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 226.222 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 228.0 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R52") (unit 1))))) (symbol (lib_id "Device:R") (at 240 210 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "4d0ef1e4-3a44-420f-952d-c6b2429690d5") (property "Reference" "R55" (at 240.03 207.01 0) (effects (font (size 1.27 1.27)))) (property "Value" "10k/1%" (at 240.03 212.09 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 238.222 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 240.0 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R55") (unit 1))))) (symbol (lib_id "Device:R") (at 240 222 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "a9649caf-296a-41fb-84ff-3416052a44e2") (property "Reference" "R50" (at 240.03 219.71 0) (effects (font (size 1.27 1.27)))) (property "Value" "825R/1%" (at 240.03 224.79 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 238.222 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 240.0 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R50") (unit 1))))) (symbol (lib_id "Device:R") (at 252 222 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "ba279427-e263-4e1a-bc40-eb53d15e0a19") (property "Reference" "R56" (at 251.46 219.71 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 251.46 224.79 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 250.222 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 252.0 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R56") (unit 1))))) (symbol (lib_id "Device:R") (at 322 196 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "eab7bcbc-d8ec-43b0-a61b-f87ad1a01e1d") (property "Reference" "R53" (at 322.58 193.04 0) (effects (font (size 1.27 1.27)))) (property "Value" "499k/1%" (at 322.58 198.12 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 320.222 196.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 322.0 196.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R53") (unit 1))))) (symbol (lib_id "Device:R") (at 322 208 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "fda4b39a-4b1b-4dc2-b68e-50dd67534ea6") (property "Reference" "R54" (at 322.58 205.74 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k/1%" (at 322.58 210.82 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 320.222 208.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 322.0 208.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R54") (unit 1))))) (symbol (lib_id "Device:L") (at 324 178 90) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "6ca6eb84-71c7-48fd-97ff-b84241419ed0") (property "Reference" "L6" (at 323.85 175.26 0) (effects (font (size 1.27 1.27)))) (property "Value" "2.2uH/8A" (at 323.85 180.34 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" (at 324.0 178.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 324.0 178.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "L6") (unit 1))))) (symbol (lib_id "Device:C") (at 336 178 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "3972637f-d7d0-486a-ac40-5d46679e1920") (property "Reference" "C35" (at 336.55 175.26 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "22uF" (at 336.55 180.34 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 336.965 174.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 336.0 178.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C35") (unit 1))))) (symbol (lib_id "Device:C") (at 334 196 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "7fc7f30b-5769-4386-9828-fc5a252576a5") (property "Reference" "C32" (at 334.01 193.04 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF" (at 334.01 198.12 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_1210_3225Metric" (at 334.965 192.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 334.0 196.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C32") (unit 1))))) (symbol (lib_id "Device:C") (at 344 196 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "95d6f1dc-cd21-4c63-88eb-43997f376c58") (property "Reference" "C33" (at 344.17 193.04 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF" (at 344.17 198.12 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_1210_3225Metric" (at 344.965 192.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 344.0 196.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C33") (unit 1))))) (symbol (lib_id "Device:C") (at 334 208 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "aa9fbdec-d78c-47ae-bc9f-e7e1c0aa9aee") (property "Reference" "C34" (at 334.01 205.74 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "10uF" (at 334.01 210.82 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 334.965 204.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 334.0 208.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C34") (unit 1))))) (symbol (lib_id "Jumper:SolderJumper_3_Bridged12") (at 240 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "0a50686b-a5ef-4002-9672-2f7df90f8d4e") (property "Reference" "JP2" (at 240.03 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "F2:Li-ion" (at 240.03 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" (at 240.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 240.0 236.76 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "JP2") (unit 1))))) (symbol (lib_id "Jumper:SolderJumper_3_Bridged12") (at 254 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "f39526a1-e8cb-47dc-b882-e1ccf7b86bc1") (property "Reference" "JP3" (at 254.0 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "F1:0" (at 254.0 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" (at 254.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 254.0 236.76 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "JP3") (unit 1))))) (symbol (lib_id "Jumper:SolderJumper_3_Bridged12") (at 268 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "80e14ed9-373f-44a0-ad34-e23dcd4af218") (property "Reference" "JP4" (at 267.97 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "F0:1" (at 267.97 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" (at 268.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 268.0 236.76 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "JP4") (unit 1))))) (symbol (lib_id "Device:R") (at 282 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "da626e8e-77eb-4f25-8765-1171ab4de91b") (property "Reference" "R57" (at 281.94 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 281.94 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 280.222 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 282.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R57") (unit 1))))) (symbol (lib_id "Device:R") (at 294 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "d6d1b9c4-4f06-4bee-a9ea-e870fac42bb7") (property "Reference" "R58" (at 293.37 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 293.37 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 292.222 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 294.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R58") (unit 1))))) (symbol (lib_id "Connector:TestPoint") (at 306 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "8b481c96-b7e3-470f-8b20-639b23e0dd83") (property "Reference" "TP1" (at 306.07 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "CLPROG" (at 306.07 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "TestPoint:TestPoint_Pad_D1.5mm" (at 311.08 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 311.08 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "TP1") (unit 1))))) (symbol (lib_id "Connector:TestPoint") (at 316 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "2f417faa-03ba-4977-8cf6-fb3531d8037e") (property "Reference" "TP2" (at 316.23 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "PFO" (at 316.23 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "TestPoint:TestPoint_Pad_D1.5mm" (at 321.08 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 321.08 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "TP2") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 328 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "07b55d37-4d32-467c-9949-6cfa50503c5d") (property "Reference" "PF8" (at 327.66 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 327.66 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 328.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 328.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "PF8") (unit 1))))) (symbol (lib_id "power:PWR_FLAG") (at 338 252 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "ebdf89f4-00df-4fac-8be0-8e5635d980c4") (property "Reference" "PF9" (at 337.82 248.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "PWR_FLAG" (at 337.82 254.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 338.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 338.0 252.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "PF9") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x02") (at 240 25 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "02b1c28b-6581-4f24-a2d8-388a336ccaa8") (property "Reference" "P11" (at 240.03 22.86 0) (effects (font (size 1.27 1.27)))) (property "Value" "CUTOFF-SW" (at 240.03 27.94 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (at 240.0 25.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 240.0 25.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "P11") (unit 1))))) (symbol (lib_id "Device:Q_NPN_BCE") (at 368 210 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "83cef213-db41-49ab-b0c9-3658f572f6b4") (property "Reference" "Q6" (at 368.3 207.01 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "MMBT3904" (at 368.3 212.09 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 373.08 212.54 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 368.0 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Q6") (unit 1))))) (symbol (lib_id "Device:R") (at 354 210 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "c1d0504b-470e-487d-9478-5ab80a6e85c9") (property "Reference" "R40" (at 354.33 207.01 0) (effects (font (size 1.27 1.27)))) (property "Value" "1k" (at 354.33 212.09 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 352.222 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 354.0 210.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R40") (unit 1))))) (symbol (lib_id "Device:R") (at 354 222 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "4dd2a3d7-276b-4efb-b89f-47280c040af3") (property "Reference" "R41" (at 354.33 219.71 0) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 354.33 224.79 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 352.222 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 354.0 222.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R41") (unit 1))))) (symbol (lib_id "Device:D") (at 384 198 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "f1652b1f-7436-46f5-b5fb-3a326d04df21") (property "Reference" "D6" (at 383.54 195.58 0) (effects (font (size 1.27 1.27)))) (property "Value" "1N4148W" (at 383.54 200.66 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Diode_SMD:D_SOD-123" (at 384.0 198.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 384.0 198.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "D6") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x03") (at 398 178 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "5cc94dd5-898c-4556-9977-76a379c3664c") (property "Reference" "P13" (at 397.51 175.26 0) (effects (font (size 1.27 1.27)))) (property "Value" "MODO-B-UPLINK (DNP — harness alt)" (at 397.51 180.34 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" (at 398.0 178.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 398.0 178.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "P13") (unit 1))))) (symbol (lib_id "Device:R") (at 360 240 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "131ec47b-3806-4b39-bf9d-4a4b0e45a839") (property "Reference" "R42" (at 359.41 237.49 0) (effects (font (size 1.27 1.27)))) (property "Value" "10k/1%" (at 359.41 242.57 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 358.222 240.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 360.0 240.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R42") (unit 1))))) (symbol (lib_id "Device:C") (at 370 240 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "907c321b-1359-48d9-9bc5-c810c15c679a") (property "Reference" "C24" (at 369.57 237.49 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100nF" (at 369.57 242.57 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 370.965 236.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 370.0 240.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C24") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x02") (at 384 240 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "16013d26-cb77-4d7a-8d37-3c93c50cf8ca") (property "Reference" "P12" (at 383.54 237.49 0) (effects (font (size 1.27 1.27)))) (property "Value" "NTC-HOTSPOT" (at 383.54 242.57 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" (at 384.0 240.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 384.0 240.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "P12") (unit 1))))) (label "BAT_PLUS" (at 30.480000000000004 15.240000000000002 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a4687991-9faf-4d38-ac15-ee2939bad2a9")) (wire (pts (xy 30.480000000000004 17.78) (xy 25.4 21.59)) (stroke (width 0) (type default)) (uuid "e910f252-d264-4a84-9544-3034a7e50510")) (label "NTC" (at 30.480000000000004 20.32 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3a09a49d-085a-4a92-8960-425278f77be5")) (label "MAIN5V" (at 307.78 204.84 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e3ae8c48-703f-4a61-921e-de2ab65e5363")) (label "PROG" (at 272.22 204.84 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3e354e78-192b-4f49-9207-1916f8105556")) (label "CLPROG_TP" (at 272.22 207.38 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "628d956e-fd58-4e29-990f-a96053d5b05a")) (label "CHRG_EN" (at 272.22 212.46 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "804e27c6-7150-43bd-8528-19f7e4189df0")) (label "GND" (at 272.22 215.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4990931d-cf90-48d6-bdcf-a0d02b723c87")) (label "VEH5V" (at 307.78 197.22 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "83668c28-1d8f-4486-8439-9c19bc74fd12")) (label "VIN_SW" (at 307.78 199.76 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ed8de2a8-ceec-4897-b3d7-bd57cf7a5698")) (label "CHRG_STAT" (at 272.22 225.16 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "6c3269c4-abb0-4799-be8f-b2a3aa995447")) (label "CHRG_FAULT" (at 272.22 227.7 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f8d46d74-41a2-45dc-a813-421407ad5564")) (label "VFB_BST" (at 272.22 202.3 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f9c5cc03-beab-4f56-a1bd-7bed19eeee07")) (label "F2_SEL" (at 272.22 217.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4459dd9e-63d2-4e48-bf18-45c14602f4dd")) (label "F1_SEL" (at 272.22 220.08 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9e489169-8ac0-4afa-bd81-c872974fb764")) (label "F0_SEL" (at 272.22 222.62 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "07fd223d-bf82-40ba-ae45-623b7a0afa14")) (label "IGATE" (at 307.78 202.3 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "107c3edc-5bab-41af-9ead-3fb37f10a019")) (label "VEH5V" (at 307.78 225.16 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "695f314a-a5b9-468d-948f-eb104c68f2c2")) (label "NTC" (at 272.22 209.92 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9be439bf-585d-4855-819b-82ea03909f35")) (label "VFB_BST" (at 272.22 199.76 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "ef98bbcd-22be-4373-a683-941db4e28c75")) (label "PFI" (at 272.22 197.22 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0801ff0b-8f0b-49d3-98be-4ffebbe5292b")) (label "PFO_TP" (at 272.22 230.24 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f35b8760-98fd-4cfb-ac83-07e69afef331")) (label "SW_BAT" (at 307.78 212.46 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ac71bdd2-7f57-41fd-9a16-738e51792c47")) (label "SW_BAT" (at 307.78 215.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "568b2ab2-6eee-46d5-81a7-1cac71d11ad3")) (label "BAT_PLUS" (at 307.78 220.08 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2501d32f-bde9-439c-a3da-c06940247f49")) (label "MAIN5V" (at 307.78 207.38 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "11168104-3afa-4087-9e1b-45d0b62b4be9")) (label "GND" (at 290.0 237.86 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "310aa370-751b-4e67-9902-d809c2e617fd")) (label "VEH5V" (at 244.19 172.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "1feb0c53-9af8-43f6-9514-ffaa52170d27")) (label "VIN_SW" (at 251.81 172.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "99fc5515-7a72-4726-be6b-9f8069b97e1e")) (label "MAIN5V" (at 247.46 193.62 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "193d50a4-5c72-4c8f-b792-de405fa60a10")) (label "MAIN5V" (at 250.0 193.62 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "b36f6523-4d02-4649-9c4c-6339c9c6243d")) (label "MAIN5V" (at 252.54 193.62 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "8717e460-bdc0-4a7e-a5b1-7a6fe4a17aa1")) (label "IGATE" (at 242.38 186.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "16c8a7f1-9bdf-47d7-a331-4c5b40f3891e")) (label "VIN_SW" (at 247.46 178.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "d0ab7b91-37d9-45d0-88e3-0a05b3efd509")) (label "VIN_SW" (at 250.0 178.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a532b2c1-f1f8-41c0-a9a1-3b50f4349ba5")) (label "VIN_SW" (at 252.54 178.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "7b125d49-6128-4d2b-a803-26a8c9bd5ec7")) (label "VIN_SW" (at 255.08 178.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9101518e-dd1f-4c72-b376-c73b7e97ac03")) (label "VEH5V" (at 228.0 192.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "025a8fa3-6f97-460a-bb39-bfbfb0747233")) (label "GND" (at 228.0 199.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "08e6517f-f812-412d-b450-d4f31feaeeab")) (label "VEH5V" (at 238.0 192.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "7da1d446-f8a1-4e22-a3f0-529c10133391")) (label "GND" (at 238.0 199.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e0262368-a0f3-4c23-b13f-427d89096bea")) (label "VEH5V" (at 228.0 206.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "09326292-0d58-4b91-afae-cd47b99dae78")) (label "PFI" (at 228.0 213.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "8a092d15-200b-4e78-92b3-047a46a315c9")) (wire (pts (xy 228.0 218.19) (xy 228.0 213.81)) (stroke (width 0) (type default)) (uuid "0c933592-a563-4544-90b0-40012955032c")) (label "GND" (at 228.0 225.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "f6a7b0a1-8418-425f-b565-46b680e03da7")) (label "VEH5V" (at 240.0 206.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "08749f67-dde6-4828-a21a-fe1ebce5ec45")) (label "NTC" (at 240.0 213.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "40028b91-c9f0-46d3-961d-2049224a0096")) (label "PROG" (at 240.0 218.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "effd5bb6-f2b4-4159-bc90-4c727e325307")) (label "GND" (at 240.0 225.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "79fe372b-ae9c-44de-a4b7-63aee87974f3")) (label "CHRG_EN" (at 252.0 218.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "d3586297-a2e3-44d9-8a86-b038c364091c")) (label "GND" (at 252.0 225.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "04b59924-b596-4c34-bdad-25246c36f139")) (label "MAIN5V" (at 322.0 192.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "a615da01-43dd-423b-ad2f-24ba998ed305")) (label "VFB_BST" (at 322.0 199.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2f9e00f9-ef20-40c3-9fe2-bf98876089eb")) (wire (pts (xy 322.0 204.19) (xy 322.0 199.81)) (stroke (width 0) (type default)) (uuid "9bdee13f-2626-47ca-983a-7012a24acbed")) (label "GND" (at 322.0 211.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "8c475cba-4f62-472c-b2c3-ee6fdbd7fd76")) (label "SW_BAT" (at 320.19 178.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "10b76b77-ccee-4029-98b5-2df0a666f868")) (label "BAT_PLUS" (at 327.81 178.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "7aad3201-1a19-4b5d-a636-86a28c7169b7")) (label "BAT_PLUS" (at 336.0 174.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4fa7b461-e277-4a49-8c3c-007c32165e36")) (label "GND" (at 336.0 181.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "844bbcc1-d925-4b8d-86fe-e20678c60c74")) (label "MAIN5V" (at 334.0 192.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0b78d8be-550a-4072-898c-1929b002c290")) (label "GND" (at 334.0 199.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "079fe846-ad7f-4f8e-a08a-06fe4a68ccd7")) (label "MAIN5V" (at 344.0 192.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8bc9046d-aca4-4462-aa73-85cc34d92366")) (label "GND" (at 344.0 199.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "10b1e221-0402-417d-8070-194df213f2d0")) (label "MAIN5V" (at 334.0 204.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9c367004-a798-4fae-a8ab-caee22b9e075")) (label "GND" (at 334.0 211.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "edf9be32-6729-43f5-a877-7d7e72ba55eb")) (label "MAIN5V" (at 234.92 252.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4538c893-5fd7-40fc-8187-ef44d599f3a0")) (label "F2_SEL" (at 240.0 255.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "1c87e614-b705-43c1-9571-0731cd19ce85")) (label "GND" (at 245.08 252.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2fd83ddb-b7ff-45aa-a6f8-f1fc48eaf566")) (wire (pts (xy 248.92 252.0) (xy 245.08 252.0)) (stroke (width 0) (type default)) (uuid "3cf4524d-a4e4-4730-8654-7b7a718b0fe0")) (label "F1_SEL" (at 254.0 255.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "71b88fee-ec2d-44a5-bdbc-c3140ee61651")) (label "MAIN5V" (at 259.08 252.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0343f5e8-48c1-4ef1-9ce1-6ca6dd7c44fb")) (wire (pts (xy 262.92 252.0) (xy 259.08 252.0)) (stroke (width 0) (type default)) (uuid "d86ce535-914c-4719-b1c4-f7bde276de2b")) (label "F0_SEL" (at 268.0 255.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "9ef2a5b9-968a-4643-8ea3-79a953109c4c")) (label "GND" (at 273.08 252.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "1d45b714-bd7a-4c6e-85ad-4e7a93e56bed")) (label "3V3" (at 282.0 248.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "468c5fa4-cc80-4a49-89c5-341a9fd573ea")) (label "CHRG_STAT" (at 282.0 255.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "3e652b75-ad80-46de-92b3-e963e39b87e5")) (label "3V3" (at 294.0 248.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c0bf8d82-af45-4eff-b3e6-4feffbff455e")) (label "CHRG_FAULT" (at 294.0 255.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "23ba7a4f-c21c-4b37-9c7c-61e45422bdde")) (label "CLPROG_TP" (at 306.0 252.0 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "8a7edb7c-84ee-4b6f-b73f-5757743a70c4")) (label "PFO_TP" (at 316.0 252.0 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "df237a60-d2a8-4eed-9a23-8c50dce9d75d")) (label "VEH5V" (at 328.0 252.0 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d831dbd7-431e-4831-8dae-65f43c6d1543")) (label "BAT_PLUS" (at 338.0 252.0 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "7479ae35-12fb-4240-bdc0-2d8e7d66dd96")) (label "MAIN5V" (at 234.92 25.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "6a811624-004f-4a58-b421-fb3fd1471a91")) (label "SYS5V" (at 234.92 27.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "80584f2b-8576-47d2-bf94-a20483e69f26")) (label "DIN_4G" (at 375.08 192.62 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "82b220d6-f010-435f-bde0-7830201fcab6")) (label "USART1_RX" (at 372.54 177.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "2e2cf1a9-b2bd-4273-b846-fa3ae53065a8")) (label "USART1_TX" (at 377.62 177.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f9ea5a0b-9022-459d-b694-9ae5d93e7e1b")) (label "SYS5V" (at 364.92 177.38 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8cff29f0-6005-4e5d-85fc-a0635960f39e")) (label "KCOIL" (at 364.92 192.62 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "56ab0013-9fea-4f6e-943b-f77725f07b09")) (label "Q6_BASE" (at 362.92 210.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8af2401b-5258-4c82-808a-56917ce84d57")) (wire (pts (xy 370.54 204.92) (xy 364.92 192.62)) (stroke (width 0) (type default)) (uuid "d3092eb2-9bf1-4e5c-8a9c-2ace1fdf3599")) (label "GND" (at 370.54 215.08 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d388862b-7c1c-4baa-b2fd-dc75f276d717")) (label "BYP_CTRL" (at 354.0 206.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "3dfcbfcc-be9a-483e-9687-f70d155723a2")) (label "Q6_BASE" (at 354.0 213.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "4e10a735-f963-42fa-b23c-09d231cb9c38")) (wire (pts (xy 354.0 218.19) (xy 354.0 213.81)) (stroke (width 0) (type default)) (uuid "53c0f5c9-5cb5-4c7e-b914-d18a6136406b")) (label "GND" (at 354.0 225.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "bbd33631-af80-4552-8dd3-2e8eb3ba1679")) (label "SYS5V" (at 380.19 198.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "bb229e79-925b-42c2-94c6-4956d02541f0")) (label "KCOIL" (at 387.81 198.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "065b01c8-aaa4-4205-b23b-bdca41cdd52e")) (label "USART1_RX" (at 392.92 175.46 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "5ab4db71-7029-443b-8ece-8419f42d0caa")) (label "DIN_4G" (at 392.92 178.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "5c365ab7-d099-45ae-8024-f764998b4d05")) (label "GND" (at 392.92 180.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "b6d5cf83-693d-4161-9932-1dc2edc1902c")) (label "3V3" (at 360.0 236.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "d0956dc3-6459-46eb-a37a-0b82ed26c83b")) (label "NTC_TEMP" (at 360.0 243.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "dd37bcc5-2223-4c52-8eb0-d9b1d5142c89")) (wire (pts (xy 370.0 236.19) (xy 360.0 243.81)) (stroke (width 0) (type default)) (uuid "12b3a208-73bd-4935-a901-79698bd19742")) (label "GND" (at 370.0 243.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "42125e95-9672-45fa-9ae1-fa9904cbc53f")) (label "NTC_TEMP" (at 378.92 240.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "46ab924b-a752-4430-9382-375c39363aa1")) (label "GND" (at 378.92 242.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "44739962-dfc3-41b0-925b-918bc43b78de")) (label "CHRG_EN" (at 119.38 46.989999999999995 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "88098fbb-e819-41cb-83ee-080090cbadc0")) (label "CHRG_STAT" (at 119.38 62.23 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "8058a224-7d47-4ed9-88d4-05e0217ad9ba")) (label "CHRG_FAULT" (at 119.38 64.77 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "5c943abe-f249-4bc6-9c89-42119cb78fdf")) (label "BYP_CTRL" (at 119.38 67.31 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e1b5314e-d8a9-4ff1-85b9-1d6aa1a2d15c")) (label "NTC_TEMP" (at 100.33 72.39 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "ef09d502-8674-4fc8-b140-e5091f9bf8a2")) (no_connect (at 272.22 232.78) (uuid "a788c55b-417d-45a3-ba49-9b49a9d1570f")) (symbol (lib_id "Drogheda-sym:SimpleRTK2B_Pro_Socket") (at 362 60 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "721d3ef5-4772-4593-94bc-7276ca640d83") (property "Reference" "MOD1" (at 361.95 37.14 0) (effects (font (size 1.27 1.27)))) (property "Value" "simpleRTK2B-Pro on UNO female headers" (at 361.95 85.4 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Module:Arduino_UNO_R3" (at 362.0 54.92 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 362.0 52.38 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "MOD1") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x10") (at 402 40 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "8d4c9880-1dd8-4900-9131-09e1665b1db7") (property "Reference" "J7" (at 402.59 36.83 0) (effects (font (size 1.27 1.27)))) (property "Value" "XBEE-ROW-1 (VCC/DOUT/DIN)" (at 402.59 41.91 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical" (at 402.0 40.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 402.0 40.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "J7") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x10") (at 402 75 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "b68f94b2-3503-42f0-9c64-a2c78ad320b2") (property "Reference" "J8" (at 402.59 72.39 0) (effects (font (size 1.27 1.27)))) (property "Value" "XBEE-ROW-2" (at 402.59 77.47 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical" (at 402.0 75.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 402.0 75.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "J8") (unit 1))))) (symbol (lib_id "Drogheda-sym:MP1584EN") (at 360 120 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "56a2435b-289b-44c2-83c2-1a9fc67e871c") (property "Reference" "U7" (at 359.41 116.84 0) (effects (font (size 1.27 1.27)))) (property "Value" "MP1584EN" (at 359.41 121.92 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" (at 360.0 114.92 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 360.0 112.38 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "U7") (unit 1))))) (symbol (lib_id "Device:L") (at 376 112 90) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "18e5d833-2591-464b-8ee3-fdf6d0f722a9") (property "Reference" "L7" (at 375.92 109.22 0) (effects (font (size 1.27 1.27)))) (property "Value" "10uH/2A" (at 375.92 114.3 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" (at 376.0 112.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 376.0 112.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "L7") (unit 1))))) (symbol (lib_id "Device:D_Schottky") (at 376 124 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "f616d9e5-ead0-479d-a3d0-aef7be989dd2") (property "Reference" "Dbk2" (at 375.92 121.92 0) (effects (font (size 1.27 1.27)))) (property "Value" "SS34" (at 375.92 127.0 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Diode_SMD:D_SMA" (at 376.0 124.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 376.0 124.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Dbk2") (unit 1))))) (symbol (lib_id "Device:C") (at 348 108 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "5b9bca13-615b-4e5f-bf65-18e42653775b") (property "Reference" "Cbst2" (at 347.98 105.41 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "10nF" (at 347.98 110.49 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 348.965 104.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 348.0 108.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Cbst2") (unit 1))))) (symbol (lib_id "Device:R") (at 344 132 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "bc56c4f5-e836-4e4c-9693-00d8e16c3068") (property "Reference" "Rfreq2" (at 344.17 129.54 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k" (at 344.17 134.62 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 342.222 132.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 344.0 132.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rfreq2") (unit 1))))) (symbol (lib_id "Device:R") (at 348 140 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "2203d370-f0cc-42ae-b42b-28ad8770a675") (property "Reference" "Rcomp2" (at 347.98 137.16 0) (effects (font (size 1.27 1.27)))) (property "Value" "40.2k" (at 347.98 142.24 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 346.222 140.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 348.0 140.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rcomp2") (unit 1))))) (symbol (lib_id "Device:C") (at 352 148 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "27e8f6d1-b547-43cf-8394-0eab30919dea") (property "Reference" "Ccomp2" (at 351.79 146.05 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2nF" (at 351.79 151.13 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 352.965 144.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 352.0 148.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Ccomp2") (unit 1))))) (symbol (lib_id "Device:R") (at 386 128 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "244f1564-b8d4-45fc-b36d-55bf4e2c2aba") (property "Reference" "R60" (at 386.08 125.73 0) (effects (font (size 1.27 1.27)))) (property "Value" "100k/1%" (at 386.08 130.81 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 384.222 128.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 386.0 128.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R60") (unit 1))))) (symbol (lib_id "Device:R") (at 386 140 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "a8a875a9-9509-4bd0-bdce-e9001b2b9d21") (property "Reference" "R61" (at 386.08 137.16 0) (effects (font (size 1.27 1.27)))) (property "Value" "31.6k/1%" (at 386.08 142.24 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 384.222 140.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 386.0 140.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "R61") (unit 1))))) (symbol (lib_id "Device:C") (at 348 156 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "ac11ec55-d953-404b-a692-ee5071dea8a9") (property "Reference" "C40" (at 347.98 153.67 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "22uF" (at 347.98 158.75 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 348.965 152.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 348.0 156.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C40") (unit 1))))) (symbol (lib_id "Device:C") (at 394 112 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "834d78c9-e3e8-4940-9732-684ec1a297d7") (property "Reference" "C41" (at 393.7 109.22 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "22uF" (at 393.7 114.3 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 394.965 108.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 394.0 112.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C41") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 394 124 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "9688e92f-c4ae-4d8b-bdfe-7d030099e199") (property "Reference" "C43" (at 393.7 121.92 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "100uF/6.3V" (at 393.7 127.0 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Capacitor_SMD:CP_Elec_6.3x7.7" (at 394.965 120.19 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 394.0 124.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "C43") (unit 1))))) (label "3V3" (at 377.24 47.3 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "1ffc045b-2d62-48af-bd3f-b3a0ba6e21bd")) (label "SW_5V" (at 377.24 39.68 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2bf8402e-dd83-4153-8d5d-f51fddbcb7a2")) (label "GND" (at 377.24 52.38 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "b9dc3f6d-d424-4835-a27a-752bc73319da")) (label "GND" (at 377.24 54.92 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a08fd36e-a44f-40df-bc38-198cbe15ca8d")) (label "GNSS_RX" (at 346.76 39.68 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4f5ffe1c-a537-41ae-ba40-83879ebb320e")) (label "GNSS_TX" (at 346.76 42.22 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "4e460f51-3b4c-4f52-84cd-efe9ba3ef3a6")) (label "DOUT_4G" (at 346.76 44.76 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "63134008-b07b-4582-8b03-eb26f5d77ef8")) (label "USART1_RX" (at 346.76 47.3 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "f01e0b6f-bd31-4d4e-940e-82c909aae2e8")) (label "GND" (at 377.24 57.46 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "646005a6-11ff-4a32-b8e2-bd0ef09fe2a8")) (label "3V3_MODEM" (at 396.92 29.84 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "75897be2-bbf5-4aa9-8c7a-f80272b30be9")) (label "DOUT_4G" (at 396.92 32.38 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c4fa5fc1-6865-4540-ae25-1687e282543d")) (label "DIN_4G" (at 396.92 34.92 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "005ebba8-741b-4d9a-8bea-18a98bb32a65")) (label "GND" (at 396.92 52.7 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "21ffab83-0354-4ca1-b440-98fad1000641")) (label "SW3_NODE" (at 367.62 117.46 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e0475450-424d-4905-b628-4a8bc60258ab")) (label "SW_5V" (at 352.38 117.46 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "c412f0f6-00e3-4f67-b8bd-142ab69d8566")) (label "COMP3" (at 352.38 125.08 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "e480ae22-3bf4-42a4-a4d1-b7f5557d4cc4")) (label "FB3" (at 352.38 122.54 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "9dd9edeb-19ff-43fd-85fc-529de41d6556")) (label "GND" (at 360.0 130.16 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "12350029-fec4-4fe7-8245-53c57b0b923d")) (label "FREQ3" (at 352.38 120.0 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "948da77c-5ac7-4d9e-b796-4ea8f8154cac")) (label "SW_5V" (at 352.38 114.92 180) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "0a43b0e9-c7f6-46a7-b569-6c32bb73da3c")) (label "BST3" (at 367.62 114.92 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "3147498b-9a30-4c89-867e-ff52c0b6afa1")) (wire (pts (xy 372.19 112.0) (xy 367.62 117.46)) (stroke (width 0) (type default)) (uuid "f91471be-f6df-4bf7-871a-d59294f89bd5")) (label "3V3_MODEM" (at 379.81 112.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "64f55ac1-42d5-405c-9eec-22a0197a3175")) (wire (pts (xy 372.19 124.0) (xy 367.62 117.46)) (stroke (width 0) (type default)) (uuid "c234a3a1-0976-4f39-8bbe-0342f514b43a")) (junction (at 367.62 117.46) (diameter 0) (color 0 0 0 0) (uuid "5a3d60a0-20ee-4f7f-a8f0-acc13c084c15")) (label "GND" (at 379.81 124.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "c019cf32-f5aa-441d-b239-06afee7731fd")) (label "BST3" (at 348.0 104.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "b44aeb14-94c0-4bf7-868b-4566a9b4e9d2")) (label "SW3_NODE" (at 348.0 111.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "e461ba17-29d2-49a0-8637-5df3c872d051")) (label "FREQ3" (at 344.0 128.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "8fd49347-d4c7-4d6d-9bce-b8fd3ffea8d1")) (label "GND" (at 344.0 135.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2afd9606-9209-4e9a-92fe-195fdf606027")) (label "COMP3" (at 348.0 136.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "86a9f204-aaac-4065-8350-84d672bea524")) (label "COMP3_C" (at 348.0 143.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "842cd085-715f-4890-ab35-a45e3d4f16ac")) (wire (pts (xy 352.0 144.19) (xy 348.0 143.81)) (stroke (width 0) (type default)) (uuid "2da888b2-5344-4c54-b872-1332930b7155")) (label "GND" (at 352.0 151.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "dc57f58d-e7cd-4c95-b541-118821712d58")) (label "3V3_MODEM" (at 386.0 124.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "92b3a7f1-23d5-4ce6-a137-9f6ae73e4cc8")) (label "FB3" (at 386.0 131.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a599a86c-7bfe-4cdb-805a-47c274539ecf")) (wire (pts (xy 386.0 136.19) (xy 386.0 131.81)) (stroke (width 0) (type default)) (uuid "189735fa-d7b0-472b-8411-cfe0aaa9a229")) (label "GND" (at 386.0 143.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0b421b95-106a-426c-90cc-17f16544ac9c")) (label "SW_5V" (at 348.0 152.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "06c187f1-7f0e-46ac-98fd-d6338cb5bb11")) (label "GND" (at 348.0 159.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "fd7eb742-4f74-45a4-9942-3c820be4eadd")) (label "3V3_MODEM" (at 394.0 108.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "16a8e7eb-5a77-4ff9-bfa7-d7e5abd36c39")) (label "GND" (at 394.0 115.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "7ce3a140-67ff-4e95-bd34-1fb26f045c89")) (label "3V3_MODEM" (at 394.0 120.19 270) (effects (font (size 1.27 1.27)) (justify right bottom)) (uuid "71f788a4-6696-4c82-ae11-39305e13b07d")) (label "GND" (at 394.0 127.81 90) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "75736cf2-7c14-4334-b066-bc9517248be7")) (no_connect (at 377.24 77.78) (uuid "1a64f8cf-cafd-4dec-b1de-f591c79d2898")) (no_connect (at 377.24 49.84) (uuid "dc26475a-480c-4d8c-b31f-c5ebe4da39ba")) (no_connect (at 377.24 44.76) (uuid "cb2d9f1d-a760-4dc0-80c0-d64707739797")) (no_connect (at 377.24 42.22) (uuid "b06df9c1-e29e-4ffb-a14b-4adb95b35969")) (no_connect (at 377.24 60.0) (uuid "96a58875-334b-45b6-a7e1-5caeb760f367")) (no_connect (at 377.24 62.54) (uuid "84d043ee-95db-49f5-9e8e-2b0a2f9330ea")) (no_connect (at 377.24 65.08) (uuid "cc8e8c37-cb5b-4896-9947-96b0d0396425")) (no_connect (at 377.24 67.62) (uuid "f08fb453-e568-40c5-8f8e-31b15765188d")) (no_connect (at 377.24 70.16) (uuid "f90cb997-1195-4e44-b80a-dcc6f85b4d08")) (no_connect (at 377.24 72.7) (uuid "505c05b6-b8a1-4a09-8832-64ef502fa73e")) (no_connect (at 346.76 60.0) (uuid "fa367931-dc63-482f-91fd-e6e283b81732")) (no_connect (at 346.76 62.54) (uuid "019c224e-5f83-4211-aadb-67dbdaf6b619")) (no_connect (at 346.76 65.08) (uuid "89d257dc-74fb-45ad-9a3b-a218a0cb5224")) (no_connect (at 346.76 67.62) (uuid "6ea29bda-a712-4ecd-a66a-8ec3932d2e38")) (no_connect (at 346.76 70.16) (uuid "bba28c38-dd15-4afc-8ac6-4861d3c5dcc2")) (no_connect (at 346.76 72.7) (uuid "88de2548-52e9-4de7-9ad4-955c63df92fe")) (no_connect (at 346.76 75.24) (uuid "8f350c87-bf86-43e7-b58f-1eba3a63287c")) (no_connect (at 346.76 77.78) (uuid "cb8e9ed2-222a-43d3-901e-a10c81b93c26")) (no_connect (at 346.76 80.32) (uuid "a5e45b4b-ca1e-4cc2-a632-5a6a551985fb")) (no_connect (at 346.76 82.86) (uuid "7def7fea-19a1-4986-814d-5d623e83034a")) (no_connect (at 346.76 57.46) (uuid "a6905b08-b1ed-4e04-bde0-b9a4f6b3b477")) (no_connect (at 346.76 52.38) (uuid "4811677e-fe2a-463d-b0fe-59f41c522777")) (no_connect (at 346.76 54.92) (uuid "38d3c7b1-0720-4562-b184-3bfaf4faafc1")) (no_connect (at 396.92 37.46) (uuid "424be76c-30eb-46bf-a391-ca1d2a94594c")) (no_connect (at 396.92 40.0) (uuid "9b9fe826-9a13-4797-9be1-98ab3583642e")) (no_connect (at 396.92 42.54) (uuid "6b54bd06-5620-4b7e-90e6-40dcdda78587")) (no_connect (at 396.92 45.08) (uuid "e4ad8d31-06b2-41e3-82d2-ea45ce6bd621")) (no_connect (at 396.92 47.62) (uuid "33716798-2af8-4bbb-be33-657a15c17a35")) (no_connect (at 396.92 50.16) (uuid "f2defdf0-eda9-4470-b141-a3133cd44533")) (no_connect (at 396.92 64.84) (uuid "73fa88ba-1d1f-4882-82a7-066c8698c742")) (no_connect (at 396.92 67.38) (uuid "814b367a-92cb-4fee-af37-2e8374b3131d")) (no_connect (at 396.92 69.92) (uuid "8678d0f7-9be0-438d-b6cc-eab58c2af64d")) (no_connect (at 396.92 72.46) (uuid "68f3a3ef-c466-4271-a33b-e2db78768b14")) (no_connect (at 396.92 75.0) (uuid "d1dc53bf-e614-4bd3-a294-993a75a8d16a")) (no_connect (at 396.92 77.54) (uuid "d4b4b762-f0bc-402e-ae03-decd9f29a5d7")) (no_connect (at 396.92 80.08) (uuid "a7f1c9c6-d09a-4e94-a84b-2d53da82d174")) (no_connect (at 396.92 82.62) (uuid "40812909-78b3-4944-a8bb-8f101455ae9e")) (no_connect (at 396.92 85.16) (uuid "f58a8e28-3d40-4267-a7a4-e1268f81b90e")) (no_connect (at 396.92 87.7) (uuid "4c9331e5-900d-43ad-95d7-911c1804aa14")) (symbol (lib_id "Relay:G5V-1") (at 370 185 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "fffd3c33-feb9-47e3-aa19-730ba833e712") (property "Reference" "K1" (at 381.43 188.81 0.0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "G5V-1 DC5" (at 381.43 186.27 0.0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Relay_THT:Relay_SPDT_Omron_G5V-1" (at 398.702 184.238 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 370.0 185.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "K1") (unit 1))))) (symbol (lib_id "Device:R") (at 36.83 80.01 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "509cd7b0-f0fd-40b4-a547-87a8a92965a0") (property "Reference" "Rigb" (at 38.862 80.01 90.0) (effects (font (size 1.27 1.27)))) (property "Value" "10k" (at 36.83 80.01 90.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 35.052 80.01 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 36.83 80.01 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rigb") (unit 1))))) (label "GND" (at 36.83 83.82000000000001 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "680f36e4-7480-47d5-813d-82d90c696fbd")) (wire (pts (xy 36.83 76.2) (xy 36.83 73.66)) (stroke (width 0) (type default)) (uuid "440683b7-ecab-40be-ba52-a00e9cf94185")) (label "IGN_SENSE" (at 36.83 73.66 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "28226e0c-f0a3-477a-b13f-d0f69ffe7be5")) (label "GND" (at 396.92 64.84 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "29dcd5f7-361a-49cb-9b44-23e70c0ff91c")) (label "3V3_MODEM" (at 396.92 80.08 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0cff0cf8-36e7-4da4-8e14-c9b498e8a68e")) (label "GND" (at 396.92 77.54 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "cf07d2a8-5f90-4f6c-851d-ea23c4792b47")) (label "GND" (at 396.92 87.7 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "0da6423e-e40a-4489-b58a-724d92735555")) (label "GND" (at 396.92 37.46 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "21ef7a31-6544-4263-ada0-9f44a55f1509")) (symbol (lib_id "Connector:USB_C_Receptacle_USB2.0_14P") (at 440 70 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "a549c399-3fd2-4e48-a8bd-8342c72ccb4a") (property "Reference" "J9" (at 440.0 92.225 0.0) (effects (font (size 1.27 1.27)))) (property "Value" "USB-C" (at 440.0 89.685 0.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Connector_USB:USB_C_Receptacle_GCT_USB4085" (at 443.81 70.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 443.81 70.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "J9") (unit 1))))) (symbol (lib_id "Device:R") (at 470 55 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "52461a06-4f3c-4dee-b32e-d6497534d73c") (property "Reference" "Rcc1" (at 472.032 55.0 90.0) (effects (font (size 1.27 1.27)))) (property "Value" "5.1k" (at 470.0 55.0 90.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 468.222 55.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 470.0 55.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rcc1") (unit 1))))) (symbol (lib_id "Device:R") (at 470 68 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "e2807b21-209d-4241-80f4-b316ec733a73") (property "Reference" "Rcc2" (at 472.032 68.0 90.0) (effects (font (size 1.27 1.27)))) (property "Value" "5.1k" (at 470.0 68.0 90.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 468.222 68.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 470.0 68.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rcc2") (unit 1))))) (symbol (lib_id "Switch:SW_Push") (at 440 110 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "91abcfa8-e21d-47f9-a4c4-9aee5eac769e") (property "Reference" "SW4G" (at 441.27 112.54 0.0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "RESET" (at 440.0 108.476 0.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS" (at 440.0 115.08 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 440.0 115.08 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "SW4G") (unit 1))))) (symbol (lib_id "Device:R") (at 470 100 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "5cf14228-280e-43a7-b9a7-25e7edde6c77") (property "Reference" "Rmled" (at 472.032 100.0 90.0) (effects (font (size 1.27 1.27)))) (property "Value" "1k" (at 470.0 100.0 90.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_SMD:R_0603_1608Metric" (at 468.222 100.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 470.0 100.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "Rmled") (unit 1))))) (symbol (lib_id "Device:LED") (at 490 100 0) (unit 1) (in_bom yes) (on_board yes) (dnp no) (uuid "044bbf0d-ccd0-4a2c-9cc6-bb3e0690b5e3") (property "Reference" "D4G" (at 490.0 102.54 0.0) (effects (font (size 1.27 1.27)))) (property "Value" "LED" (at 490.0 97.46 0.0) (effects (font (size 1.27 1.27)))) (property "Footprint" "LED_SMD:LED_0805_2012Metric" (at 490.0 100.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 490.0 100.0 0) (effects (font (size 1.27 1.27)) (hide yes))) (instances (project "project" (path "/" (reference "D4G") (unit 1))))) (label "MODEM_RST" (at 396.92 40.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "90a9825f-e34c-4fd4-b97e-fa9a7e1b363a")) (label "USB_VBUS" (at 396.92 42.54 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "6b2543e7-bf0c-4c8e-b4bc-50470169fbc5")) (label "USB_DP" (at 396.92 45.08 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d724b42a-0e62-4f75-9092-8e70ef5205f8")) (label "USB_DM" (at 396.92 47.62 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "58eb09b3-e975-4ad6-a182-b402bccd0294")) (label "MODEM_LED" (at 396.92 82.62 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "2f29d753-8a51-49f3-915d-da9298fcf16a")) (label "USB_CC1" (at 470.0 51.19 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "97a92520-b38a-4e2b-bb13-2f0b66ce7090")) (label "GND" (at 470.0 58.81 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "197c4d67-e14e-430a-9bea-167eec396212")) (label "USB_CC2" (at 470.0 64.19 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a8cd6d2b-181a-4f91-bd36-a4db9c6ef8e5")) (label "GND" (at 470.0 71.81 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ba8bb96b-ef1f-4348-be6c-81093bcfbf3a")) (label "MODEM_RST" (at 434.92 110.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "9fa60404-c8ce-4e84-94ee-49aced5b2d67")) (label "GND" (at 445.08 110.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "9094ce7b-afae-4136-836a-916245fef7ab")) (label "MODEM_LED_A" (at 493.81 100.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "c4f7a2d2-f6b0-4913-8712-f01f4c4a5782")) (label "GND" (at 486.19 100.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "f8c36290-c2af-4f8d-839b-c3077d63c2f6")) (label "GND" (at 440.0 92.86 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "b111a7aa-775b-40cd-aa94-d7eff68955e7")) (label "GND" (at 440.0 92.86 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "076eec60-c008-4e00-af37-5a7bae91dec5")) (label "GND" (at 440.0 92.86 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "9c947d02-3587-4406-bc5a-4c8e3b74182e")) (label "GND" (at 440.0 92.86 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "095e1de1-9933-4d78-ae95-c94ff6e0b48f")) (label "GND" (at 432.38 92.86 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "f1ce043d-8eb1-4b91-bfc3-3bdbf3478ad4")) (label "USB_VBUS" (at 455.24 54.76 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "768d9324-32aa-40ba-ad84-b2fd657223eb")) (label "USB_VBUS" (at 455.24 54.76 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "3b94592f-2a42-468e-8624-8934c9442a7d")) (label "USB_VBUS" (at 455.24 54.76 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "6800fda1-15b0-45b7-96b8-a64e979d1d2c")) (label "USB_VBUS" (at 455.24 54.76 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "a8c36b3c-279e-4773-b803-5e66ab941e30")) (label "USB_CC1" (at 455.24 59.84 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "58d758f9-7bea-4601-8e8a-f5a3dbd70721")) (label "USB_CC2" (at 455.24 62.38 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "d9592120-ac1f-4cae-bda9-7c4f22c0ebcf")) (label "USB_DP" (at 455.24 72.54 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "34b520d7-a5a1-4ba9-8599-27080f3e3486")) (label "USB_DP" (at 455.24 75.08 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "f120fe25-1a98-4cbb-b9d8-ed41fa26295e")) (label "USB_DM" (at 455.24 67.46 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "f0deb5d6-61e8-49aa-b71d-54b729fd27f3")) (label "USB_DM" (at 455.24 70.0 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "bec41ed9-501b-48c8-9010-e94389497c4c")) (label "MODEM_LED" (at 470.0 96.19 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "fdce13f9-46e1-4e48-9421-08953a1b3d1e")) (label "MODEM_LED_A" (at 470.0 103.81 0) (effects (font (size 1.27 1.27)) (justify left bottom)) (uuid "ebf716dd-6359-47a1-ac1a-cc2cf02b345f")) (sheet_instances (path "/" (page "1"))) (embedded_fonts no)) \ No newline at end of file +(kicad_sch + (version 20260306) + (generator "eeschema") + (generator_version "10.0") + (uuid "561403b3-895e-4153-a7be-3876ae930d43") + (paper "A3") + (title_block + (title "EINARBoard HBOX 1.0") + (date "2026-06-23") + (rev "1.0") + (company "Helgen Servicios Especializados") + (comment 1 "Last Review: Dr. Leopoldo Rodriguez Salazar") + ) + (lib_symbols + (symbol "Amplifier_Operational:LM358" + (pin_names + (offset 0.127) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "U" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "LM358" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "LM358_0_1" + (polyline + (pts + (xy -5.08 5.08) (xy 5.08 0) (xy -5.08 -5.08) (xy -5.08 5.08) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "LM358_1_1" + (pin input line + (at -7.62 2.54 0) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -7.62 -2.54 0) + (length 2.54) + (name "+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 7.62 0 180) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -2.54 -7.62 90) + (length 3.81) + (name "V-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -2.54 7.62 270) + (length 3.81) + (name "V+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector:TestPoint" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.762) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "TP" + (at 0 6.858 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "TestPoint" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 5.08 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 5.08 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "test point" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "test point tp" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Pin* Test*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "TestPoint_0_1" + (circle + (center 0 3.302) + (radius 0.762) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "TestPoint_1_1" + (pin passive line + (at 0 0 90) + (length 2.54) + (name "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector:USB_C_Receptacle_USB2.0_14P" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 22.225 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USB_C_Receptacle_USB2.0_14P" + (at 0 19.685 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 3.81 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip" + (at 3.81 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "USB 2.0-only 14P Type-C Receptacle connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "usb universal serial bus type-C USB2.0" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "USB*C*Receptacle*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_14P_0_0" + (rectangle + (start -0.254 -17.78) + (end 0.254 -16.764) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 15.494) + (end 9.144 14.986) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 10.414) + (end 9.144 9.906) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 7.874) + (end 9.144 7.366) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 2.794) + (end 9.144 2.286) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 0.254) + (end 9.144 -0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -2.286) + (end 9.144 -2.794) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -4.826) + (end 9.144 -5.334) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_14P_0_1" + (rectangle + (start -10.16 17.78) + (end 10.16 -17.78) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (polyline + (pts + (xy -8.89 -3.81) (xy -8.89 3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -7.62 -3.81) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -7.62 3.81) + (mid -6.985 4.4423) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -7.62 3.81) + (mid -6.985 4.4423) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -8.89 3.81) + (mid -6.985 5.7067) + (end -5.08 3.81) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -5.08 -3.81) + (mid -6.985 -5.7067) + (end -8.89 -3.81) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -6.35 -3.81) + (mid -6.985 -4.4423) + (end -7.62 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -6.35 -3.81) + (mid -6.985 -4.4423) + (end -7.62 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy -5.08 3.81) (xy -5.08 -3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center -2.54 1.143) + (radius 0.635) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy -1.27 4.318) (xy 0 6.858) (xy 1.27 4.318) (xy -1.27 4.318) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 0 -2.032) (xy 2.54 0.508) (xy 2.54 1.778) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -3.302) (xy -2.54 -0.762) (xy -2.54 0.508) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -5.842) (xy 0 4.318) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 0 -5.842) + (radius 1.27) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (rectangle + (start 1.905 1.778) + (end 3.175 3.048) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_14P_1_1" + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 10.16 180) + (length 5.08) + (name "CC1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -2.54 180) + (length 5.08) + (name "D+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 2.54 180) + (length 5.08) + (name "D-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 7.62 180) + (length 5.08) + (name "CC2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -5.08 180) + (length 5.08) + (name "D+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 0 180) + (length 5.08) + (name "D-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -7.62 -22.86 90) + (length 5.08) + (name "SHIELD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "SH" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x02" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x02" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Conn_01x02_1_1" + (rectangle + (start -1.27 1.27) + (end 1.27 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x03" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x03" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Conn_01x03_1_1" + (rectangle + (start -1.27 3.81) + (end 1.27 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x04" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x04" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Conn_01x04_1_1" + (rectangle + (start -1.27 3.81) + (end 1.27 -6.35) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -4.953) + (end 0 -5.207) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -5.08 0) + (length 3.81) + (name "Pin_4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x05" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 7.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x05" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Conn_01x05_1_1" + (rectangle + (start -1.27 6.35) + (end 1.27 -6.35) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 5.207) + (end 0 4.953) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -4.953) + (end 0 -5.207) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 5.08 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -5.08 0) + (length 3.81) + (name "Pin_5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x10" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 12.7 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x10" + (at 0 -15.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Conn_01x10_1_1" + (rectangle + (start -1.27 11.43) + (end 1.27 -13.97) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 10.287) + (end 0 10.033) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 7.747) + (end 0 7.493) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 5.207) + (end 0 4.953) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -4.953) + (end 0 -5.207) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -7.493) + (end 0 -7.747) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -10.033) + (end 0 -10.287) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -12.573) + (end 0 -12.827) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 10.16 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 7.62 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 5.08 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -5.08 0) + (length 3.81) + (name "Pin_7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -7.62 0) + (length 3.81) + (name "Pin_8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -10.16 0) + (length 3.81) + (name "Pin_9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -12.7 0) + (length 3.81) + (name "Pin_10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x20" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "J" + (at 0 25.4 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x20" + (at 0 -27.94 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Conn_01x20_1_1" + (rectangle + (start -1.27 24.13) + (end 1.27 -26.67) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 22.987) + (end 0 22.733) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 20.447) + (end 0 20.193) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 17.907) + (end 0 17.653) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 15.367) + (end 0 15.113) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 12.827) + (end 0 12.573) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 10.287) + (end 0 10.033) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 7.747) + (end 0 7.493) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 5.207) + (end 0 4.953) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -4.953) + (end 0 -5.207) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -7.493) + (end 0 -7.747) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -10.033) + (end 0 -10.287) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -12.573) + (end 0 -12.827) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -15.113) + (end 0 -15.367) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -17.653) + (end 0 -17.907) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -20.193) + (end 0 -20.447) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -22.733) + (end 0 -22.987) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -25.273) + (end 0 -25.527) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 22.86 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 20.32 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 17.78 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 15.24 0) + (length 3.81) + (name "Pin_4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 12.7 0) + (length 3.81) + (name "Pin_5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 10.16 0) + (length 3.81) + (name "Pin_6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 7.62 0) + (length 3.81) + (name "Pin_7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 5.08 0) + (length 3.81) + (name "Pin_8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -5.08 0) + (length 3.81) + (name "Pin_12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -7.62 0) + (length 3.81) + (name "Pin_13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -10.16 0) + (length 3.81) + (name "Pin_14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -12.7 0) + (length 3.81) + (name "Pin_15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -15.24 0) + (length 3.81) + (name "Pin_16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -17.78 0) + (length 3.81) + (name "Pin_17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -20.32 0) + (length 3.81) + (name "Pin_18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -22.86 0) + (length 3.81) + (name "Pin_19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -25.4 0) + (length 3.81) + (name "Pin_20" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "20" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "C" + (at 0.635 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C" + (at 0.635 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "C_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "C_0_1" + (polyline + (pts + (xy -2.032 0.762) (xy 2.032 0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.032 -0.762) (xy 2.032 -0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "C_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C_Polarized" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "C" + (at 0.635 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C_Polarized" + (at 0.635 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "CP_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "C_Polarized_0_1" + (rectangle + (start -2.286 0.508) + (end 2.286 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 2.286) (xy -0.762 2.286) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 2.794) (xy -1.27 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 2.286 -0.508) + (end -2.286 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "C_Polarized_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Crystal" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "Y" + (at 0 3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Crystal" + (at 0 -3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Crystal_0_1" + (polyline + (pts + (xy -2.54 0) (xy -1.905 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.905 -1.27) (xy -1.905 1.27) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.143 2.54) + (end 1.143 -2.54) + (stroke + (width 0.3048) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.905 -1.27) (xy 1.905 1.27) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 0) (xy 1.905 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Crystal_1_1" + (pin passive line + (at -3.81 0 0) + (length 1.27) + (name "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 1.27) + (name "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "D" + (at 0 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "D_0_1" + (polyline + (pts + (xy -1.27 1.27) (xy -1.27 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 1.27) (xy 1.27 -1.27) (xy -1.27 0) (xy 1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D_Schottky" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "D" + (at 0 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D_Schottky" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Schottky diode" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "diode Schottky" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "D_Schottky_0_1" + (polyline + (pts + (xy -1.905 0.635) (xy -1.905 1.27) (xy -1.27 1.27) (xy -1.27 -1.27) (xy -0.635 -1.27) (xy -0.635 -0.635) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 1.27) (xy 1.27 -1.27) (xy -1.27 0) (xy 1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_Schottky_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D_TVS" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "D" + (at 0 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D_TVS" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Bidirectional transient-voltage-suppression diode" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "diode TVS thyrector" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "D_TVS_0_1" + (polyline + (pts + (xy -2.54 1.27) (xy -2.54 -1.27) (xy 2.54 1.27) (xy 2.54 -1.27) (xy -2.54 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.508 1.27) (xy 0 1.27) (xy 0 -1.27) (xy -0.508 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_TVS_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D_Zener" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "D" + (at 0 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D_Zener" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Zener diode" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "diode" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "D_Zener_0_1" + (polyline + (pts + (xy -1.27 -1.27) (xy -1.27 1.27) (xy -0.762 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.27) (xy 1.27 1.27) (xy -1.27 0) (xy 1.27 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_Zener_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:L" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "L" + (at -1.27 0 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "L" + (at 1.905 0 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "L_0_1" + (arc + (start 0 2.54) + (mid 0.635 1.905) + (end 0 1.27) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start 0 1.27) + (mid 0.635 0.635) + (end 0 0) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start 0 0) + (mid 0.635 -0.635) + (end 0 -1.27) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start 0 -1.27) + (mid 0.635 -1.905) + (end 0 -2.54) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "L_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:LED" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "D" + (at 0 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Light emitting diode" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "LED diode" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "LED* LED_SMD:* LED_THT:*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "LED_0_1" + (polyline + (pts + (xy -3.048 -0.762) (xy -4.572 -2.286) (xy -3.81 -2.286) (xy -4.572 -2.286) (xy -4.572 -1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 -0.762) (xy -3.302 -2.286) (xy -2.54 -2.286) (xy -3.302 -2.286) (xy -3.302 -1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 0) (xy 1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 -1.27) (xy -1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.27) (xy 1.27 1.27) (xy -1.27 0) (xy 1.27 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "LED_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Polyfuse" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "F" + (at -2.54 0 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Polyfuse" + (at 2.54 0 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 1.27 -5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resettable fuse, polymeric positive temperature coefficient" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "resettable fuse PTC PPTC polyfuse polyswitch" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "*polyfuse* *PTC*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Polyfuse_0_1" + (polyline + (pts + (xy -1.524 2.54) (xy -1.524 1.524) (xy 1.524 -1.524) (xy 1.524 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -0.762 2.54) + (end 0.762 -2.54) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 2.54) (xy 0 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Polyfuse_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Q_NMOS" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "Q" + (at 5.08 1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "Q_NMOS" + (at 5.08 -1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 5.08 2.54 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "N-MOSFET transistor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "NMOS N-MOS" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Q_NMOS_0_1" + (polyline + (pts + (xy 0.254 1.905) (xy 0.254 -1.905) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.254 0) (xy -2.54 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 2.286) (xy 0.762 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 0.508) (xy 0.762 -0.508) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 -1.27) (xy 0.762 -2.286) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 -1.778) (xy 3.302 -1.778) (xy 3.302 1.778) (xy 0.762 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.016 0) (xy 2.032 0.381) (xy 2.032 -0.381) (xy 1.016 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (circle + (center 1.651 0) + (radius 2.794) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 2.54) (xy 2.54 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 2.54 1.778) + (radius 0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (circle + (center 2.54 -1.778) + (radius 0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 2.54 -2.54) (xy 2.54 0) (xy 0.762 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.921 0.381) (xy 3.683 0.381) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 3.302 0.381) (xy 2.921 -0.254) (xy 3.683 -0.254) (xy 3.302 0.381) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Q_NMOS_1_1" + (pin passive line + (at 2.54 5.08 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -5.08 0 0) + (length 2.54) + (name "G" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "G" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -5.08 90) + (length 2.54) + (name "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Q_NMOS_GSD" + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "Q" + (at 5.08 1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "Q_NMOS_GSD" + (at 5.08 -1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 5.08 2.54 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Q_NMOS_GSD_0_1" + (polyline + (pts + (xy 0.254 1.905) (xy 0.254 -1.905) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.254 0) (xy -2.54 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 2.286) (xy 0.762 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 0.508) (xy 0.762 -0.508) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 -1.27) (xy 0.762 -2.286) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 -1.778) (xy 3.302 -1.778) (xy 3.302 1.778) (xy 0.762 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.016 0) (xy 2.032 0.381) (xy 2.032 -0.381) (xy 1.016 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (circle + (center 1.651 0) + (radius 2.794) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 2.54) (xy 2.54 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 2.54 1.778) + (radius 0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (circle + (center 2.54 -1.778) + (radius 0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 2.54 -2.54) (xy 2.54 0) (xy 0.762 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.794 0.508) (xy 2.921 0.381) (xy 3.683 0.381) (xy 3.81 0.254) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 3.302 0.381) (xy 2.921 -0.254) (xy 3.683 -0.254) (xy 3.302 0.381) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Q_NMOS_GSD_1_1" + (pin input line + (at -5.08 0 0) + (length 2.54) + (name "G" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -5.08 90) + (length 2.54) + (name "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 5.08 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Q_NPN_BCE" + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "Q" + (at 5.08 1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "Q_NPN_BCE" + (at 5.08 -1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 5.08 2.54 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Q_NPN_BCE_0_1" + (polyline + (pts + (xy 0.635 1.905) (xy 0.635 -1.905) (xy 0.635 -1.905) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 0.635) (xy 2.54 2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 -0.635) (xy 2.54 -2.54) (xy 2.54 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 1.27 0) + (radius 2.8194) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.778) (xy 1.778 -1.27) (xy 2.286 -2.286) (xy 1.27 -1.778) (xy 1.27 -1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "Q_NPN_BCE_1_1" + (pin input line + (at -5.08 0 0) + (length 5.715) + (name "B" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 5.08 270) + (length 2.54) + (name "C" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -5.08 90) + (length 2.54) + (name "E" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Q_PMOS" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "Q" + (at 5.08 1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "Q_PMOS" + (at 5.08 -1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 5.08 2.54 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "P-MOSFET transistor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "PMOS P-MOS" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Q_PMOS_0_1" + (polyline + (pts + (xy 0.254 1.905) (xy 0.254 -1.905) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.254 0) (xy -2.54 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 2.286) (xy 0.762 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 1.778) (xy 3.302 1.778) (xy 3.302 -1.778) (xy 0.762 -1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 0.508) (xy 0.762 -0.508) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.762 -1.27) (xy 0.762 -2.286) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 1.651 0) + (radius 2.794) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.286 0) (xy 1.27 0.381) (xy 1.27 -0.381) (xy 2.286 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 2.54 2.54) (xy 2.54 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 2.54 1.778) + (radius 0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (circle + (center 2.54 -1.778) + (radius 0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 2.54 -2.54) (xy 2.54 0) (xy 0.762 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.921 -0.381) (xy 3.683 -0.381) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 3.302 -0.381) (xy 2.921 0.254) (xy 3.683 0.254) (xy 3.302 -0.381) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Q_PMOS_1_1" + (pin passive line + (at 2.54 5.08 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -5.08 0 0) + (length 2.54) + (name "G" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "G" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -5.08 90) + (length 2.54) + (name "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:R" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "R" + (at 2.032 0 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R" + (at 0 0 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at -1.778 0 90) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "R res resistor" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "R_*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "R_0_1" + (rectangle + (start -1.016 -2.54) + (end 1.016 2.54) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "R_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Drogheda-sym:AO4406A" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "Q" + (at 2.54 0 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AO4406A" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "N-Channel MOSFET 30V 13A 8.5mOhm SOIC-8 (pins 1-3=S, 4=G, 5-8=D) — VIN-VSYS disconnect" + (at 0 -10.16 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "nmos mosfet soic8 disconnect" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "AO4406A_0_1" + (rectangle + (start -5.08 -5.08) + (end 5.08 5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "AO4406A_1_1" + (pin passive line + (at -2.54 -7.62 90) + (length 2.54) + (name "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -7.62 90) + (length 2.54) + (name "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -7.62 90) + (length 2.54) + (name "S" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -7.62 0 0) + (length 2.54) + (name "G" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -2.54 7.62 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 7.62 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 7.62 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 7.62 270) + (length 2.54) + (name "D" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Drogheda-sym:LTC4040EUFD" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "U" + (at 2.54 0 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LTC4040EUFD" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "https://www.analog.com/media/en/technical-documentation/data-sheets/4040fb.pdf" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "2.5A Battery Backup Power Manager, 1S Li-Ion/LiFePO4, buck charger + boost backup, QFN-24 4x5" + (at 0 -10.16 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "battery backup charger boost power-path LTC" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "LTC4040EUFD_0_1" + (rectangle + (start -15.24 -20.32) + (end 15.24 20.32) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "LTC4040EUFD_1_1" + (pin power_in line + (at 17.78 10.16 180) + (length 2.54) + (name "VSYS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -17.78 10.16 0) + (length 2.54) + (name "PROG" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -17.78 7.62 0) + (length 2.54) + (name "CLPROG" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 2.54 0) + (length 2.54) + (name "CHGOFF" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 0 0) + (length 2.54) + (name "BSTOFF" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 17.78 17.78 180) + (length 2.54) + (name "VIN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 17.78 15.24 180) + (length 2.54) + (name "CLN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin open_collector line + (at -17.78 -10.16 0) + (length 2.54) + (name "CHRG" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin open_collector line + (at -17.78 -12.7 0) + (length 2.54) + (name "FAULT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 12.7 0) + (length 2.54) + (name "RSTFB" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin open_collector line + (at -17.78 -17.78 0) + (length 2.54) + (name "RST" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 -2.54 0) + (length 2.54) + (name "F2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 -5.08 0) + (length 2.54) + (name "F1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 -7.62 0) + (length 2.54) + (name "F0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 17.78 12.7 180) + (length 2.54) + (name "IGATE" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 17.78 -10.16 180) + (length 2.54) + (name "OVSNS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 5.08 0) + (length 2.54) + (name "NTC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 15.24 0) + (length 2.54) + (name "BSTFB" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -17.78 17.78 0) + (length 2.54) + (name "PFI" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin open_collector line + (at -17.78 -15.24 0) + (length 2.54) + (name "PFO" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "20" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 17.78 2.54 180) + (length 2.54) + (name "SW" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "21" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 17.78 0 180) + (length 2.54) + (name "SW" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "22" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 17.78 -5.08 180) + (length 2.54) + (name "BAT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "23" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 17.78 7.62 180) + (length 2.54) + (name "VSYS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "24" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -22.86 90) + (length 2.54) + (name "GND_EP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "25" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Drogheda-sym:MP1584EN" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "U" + (at 2.54 0 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MP1584EN" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "https://www.monolithicpower.com/en/mp1584.html" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "MP1584EN 3A 28V step-down converter (SOIC-8-EP)" + (at 0 -10.16 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "buck regulator step-down MP1584" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "MP1584EN_0_1" + (rectangle + (start -5.08 -7.62) + (end 5.08 7.62) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "MP1584EN_1_1" + (pin passive line + (at 7.62 2.54 180) + (length 2.54) + (name "SW" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -7.62 2.54 0) + (length 2.54) + (name "EN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -7.62 -5.08 0) + (length 2.54) + (name "COMP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -7.62 -2.54 0) + (length 2.54) + (name "FB" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -10.16 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -7.62 0 0) + (length 2.54) + (name "FREQ" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -7.62 5.08 0) + (length 2.54) + (name "VIN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 7.62 5.08 180) + (length 2.54) + (name "BST" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Drogheda-sym:SimpleRTK2B_Pro_Socket" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "MOD" + (at 2.54 0 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SimpleRTK2B_Pro_Socket" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Module:Arduino_UNO_R3" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "https://www.ardusimple.com/simplertk2b-pro-hookup-guide/" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "simpleRTK2B Pro (ZED-F9P) mounted as shield on Arduino-UNO-pattern female headers. Pads match Module:Arduino_UNO_R3. D0=TX1 D1=RX1 D2=RX2 D8=TX2 (Ardusimple pinout R00). IOREF driven 3.3V; 5V pin = input (5V=OUTPUT switch OFF); XBee-socket switch on the Pro parked on UART1." + (at 0 -10.16 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "ardusimple simplertk2b f9p shield socket carrier" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "SimpleRTK2B_Pro_Socket_0_1" + (rectangle + (start -12.7 -26.67) + (end 12.7 24.13) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "SimpleRTK2B_Pro_Socket_1_1" + (pin passive line + (at 15.24 -17.78 180) + (length 2.54) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 15.24 12.7 180) + (length 2.54) + (name "IOREF" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 10.16 180) + (length 2.54) + (name "RESET" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 2.54) + (name "3V3_OUT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 15.24 20.32 180) + (length 2.54) + (name "5V" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 15.24 7.62 180) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 5.08 180) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 17.78 180) + (length 2.54) + (name "VIN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 0 180) + (length 2.54) + (name "A0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 -2.54 180) + (length 2.54) + (name "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 -5.08 180) + (length 2.54) + (name "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 -7.62 180) + (length 2.54) + (name "A3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 -10.16 180) + (length 2.54) + (name "A4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 -12.7 180) + (length 2.54) + (name "A5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at -15.24 20.32 0) + (length 2.54) + (name "TX1_D0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -15.24 17.78 0) + (length 2.54) + (name "RX1_D1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -15.24 15.24 0) + (length 2.54) + (name "RX2_D2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 0 0) + (length 2.54) + (name "D3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -2.54 0) + (length 2.54) + (name "D4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -5.08 0) + (length 2.54) + (name "D5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "20" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -7.62 0) + (length 2.54) + (name "D6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "21" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -10.16 0) + (length 2.54) + (name "D7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "22" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at -15.24 12.7 0) + (length 2.54) + (name "TX2_D8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "23" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -12.7 0) + (length 2.54) + (name "D9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "24" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -15.24 0) + (length 2.54) + (name "D10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "25" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -17.78 0) + (length 2.54) + (name "FENCE_D11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "26" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -20.32 0) + (length 2.54) + (name "EXTINT_D12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "27" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 -22.86 0) + (length 2.54) + (name "TPS_D13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "28" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 2.54 180) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "29" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 2.54 0) + (length 2.54) + (name "AREF" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "30" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 7.62 0) + (length 2.54) + (name "SDA" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "31" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -15.24 5.08 0) + (length 2.54) + (name "SCL" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "32" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Jumper:SolderJumper_2_Open" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "JP" + (at 0 2.032 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SolderJumper_2_Open" + (at 0 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 -7.62 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Solder Jumper, 2-pole, open" + (at 0 -5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "solder jumper SPST" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "SolderJumper*Open*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "SolderJumper_2_Open_0_1" + (polyline + (pts + (xy -0.254 1.016) (xy -0.254 -1.016) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -0.254 -1.016) + (mid -1.2656 0) + (end -0.254 1.016) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start 0.254 1.016) + (mid 1.2656 0) + (end 0.254 -1.016) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 0.254 1.016) (xy 0.254 -1.016) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "SolderJumper_2_Open_1_1" + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 3.81) + (name "B" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Jumper:SolderJumper_3_Bridged12" + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "JP" + (at -2.54 -2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SolderJumper_3_Bridged12" + (at 0 2.794 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 -15.24 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "3-pole Solder Jumper, pins 1+2 closed/bridged" + (at 0 -12.7 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "Solder Jumper SPDT" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "SolderJumper*Bridged12*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "SolderJumper_3_Bridged12_0_1" + (polyline + (pts + (xy -2.54 0) (xy -2.032 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.016 1.016) (xy -1.016 -1.016) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.016 0.508) + (end -0.508 -0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -1.016 -1.016) + (mid -2.0276 0) + (end -1.016 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (rectangle + (start -0.508 1.016) + (end 0.508 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 0 -1.27) (xy 0 -1.016) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start 1.016 1.016) + (mid 2.0276 0) + (end 1.016 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 1.016 1.016) (xy 1.016 -1.016) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 0) (xy 2.032 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "SolderJumper_3_Bridged12_1_1" + (pin passive line + (at -5.08 0 0) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.54) + (name "C" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 2.54) + (name "B" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Regulator_Linear:AMS1117-3.3" + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "U" + (at -3.81 3.175 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AMS1117-3.3" + (at 0 3.175 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 2.54 -6.35 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "AMS1117-3.3_0_1" + (rectangle + (start -5.08 1.905) + (end 5.08 -5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "AMS1117-3.3_1_1" + (pin power_in line + (at 0 -7.62 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_out line + (at 7.62 0 180) + (length 2.54) + (name "VO" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -7.62 0 0) + (length 2.54) + (name "VI" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Relay:G5V-1" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "K" + (at 11.43 3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "G5V-1" + (at 11.43 1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Relay_THT:Relay_SPDT_Omron_G5V-1" + (at 28.702 -0.762 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5v_1.pdf" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "Single Pole Relay SPDT" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Relay*SPDT*Omron*G5V?1*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "G5V-1_0_0" + (polyline + (pts + (xy 7.62 5.08) (xy 7.62 2.54) (xy 6.985 3.175) (xy 7.62 3.81) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "G5V-1_0_1" + (rectangle + (start -10.16 5.08) + (end 10.16 -5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -8.255 1.905) + (end -1.905 -1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -7.62 -1.905) (xy -2.54 1.905) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -5.08 5.08) (xy -5.08 1.905) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -5.08 -5.08) (xy -5.08 -1.905) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.905 0) (xy -1.27 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -0.635 0) (xy 0 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 0) (xy 1.27 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.905 0) (xy 2.54 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 5.08) (xy 2.54 2.54) (xy 3.175 3.175) (xy 2.54 3.81) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 3.175 0) (xy 3.81 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 5.08 -2.54) (xy 3.175 3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 5.08 -2.54) (xy 5.08 -5.08) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "G5V-1_1_1" + (pin passive line + (at 2.54 7.62 270) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 7.62 270) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 -7.62 90) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 -7.62 90) + (length 2.54) + (hide yes) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -7.62 90) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 7.62 7.62 270) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Relay:Relay_SPDT" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "K" + (at 11.43 3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "Relay_SPDT" + (at 11.43 1.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 11.43 -1.27 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Relay SPDT, monostable, EN50005" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "1P2T 1-Form-C single pole throw" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Relay?SPDT*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "Relay_SPDT_0_0" + (polyline + (pts + (xy 7.62 5.08) (xy 7.62 2.54) (xy 6.985 3.175) (xy 7.62 3.81) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Relay_SPDT_0_1" + (rectangle + (start -10.16 5.08) + (end 10.16 -5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -8.255 1.905) + (end -1.905 -1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -7.62 -1.905) (xy -2.54 1.905) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -5.08 5.08) (xy -5.08 1.905) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -5.08 -5.08) (xy -5.08 -1.905) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.905 0) (xy -1.27 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -0.635 0) (xy 0 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 0) (xy 1.27 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.905 0) (xy 2.54 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 5.08) (xy 2.54 2.54) (xy 3.175 3.175) (xy 2.54 3.81) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 3.175 0) (xy 3.81 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 5.08 -2.54) (xy 3.175 3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 5.08 -2.54) (xy 5.08 -5.08) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Relay_SPDT_1_1" + (pin passive line + (at 5.08 -7.62 90) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 7.62 270) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 7.62 7.62 270) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 7.62 270) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -7.62 90) + (length 2.54) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Sensor_Humidity:SHT4x" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "U" + (at 0 8.89 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "SHT4x" + (at 0 6.35 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (at 3.81 -6.35 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Datasheet" "https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf" + (at 3.81 -8.89 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Description" "Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "Sensirion environment environmental measurement digital SHT40 SHT41 SHT45" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "Sensirion?DFN*1.5x1.5mm*P0.8mm*SHT4x*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "SHT4x_1_1" + (rectangle + (start -5.08 5.08) + (end 5.08 -5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (pin bidirectional line + (at -7.62 -2.54 0) + (length 2.54) + (name "SDA" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -7.62 2.54 0) + (length 2.54) + (name "SCL" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 2.54 7.62 270) + (length 2.54) + (name "VDD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 2.54 -7.62 90) + (length 2.54) + (name "VSS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Sensor_Temperature:TMP102xxDRL" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "U" + (at -2.54 10.795 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "TMP102xxDRL" + (at -2.54 8.89 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-563" + (at 1.27 -8.89 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Datasheet" "https://www.ti.com/lit/ds/symlink/tmp102.pdf" + (at 1.27 -11.43 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Description" "Digital Temperature Sensor, ±3°C, low-Power, SMBus, 12 bit, Two-Wire Serial Interface, SOT-563" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "digital temperature sensor i2c smbus" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_fp_filters" "SOT?563*" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "TMP102xxDRL_0_1" + (rectangle + (start -7.62 7.62) + (end 7.62 -7.62) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "TMP102xxDRL_1_1" + (polyline + (pts + (xy 2.413 1.905) (xy 2.413 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.413 1.905) (xy 3.048 1.905) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.413 1.27) (xy 3.048 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.413 0.635) (xy 3.048 0.635) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.413 0) (xy 3.048 0) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.413 -0.635) (xy 3.048 -0.635) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start 2.413 1.905) + (mid 3.048 2.5373) + (end 3.683 1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 3.048 -3.81) + (radius 1.27) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 3.683 1.905) (xy 3.683 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 3.683 -3.175) + (end 2.413 -1.27) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 2.54) + (name "SCL" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -10.16 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin open_collector line + (at 10.16 5.08 180) + (length 2.54) + (name "ALERT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 2.54) + (name "ADD0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 10.16 270) + (length 2.54) + (name "V+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 5.08 0) + (length 2.54) + (name "SDA" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Switch:SW_Push" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "SW" + (at 1.27 2.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "SW_Push" + (at 0 -1.524 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 5.08 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "SW_Push_0_1" + (circle + (center -2.032 0) + (radius 0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 1.27) (xy 0 3.048) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 2.032 0) + (radius 0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 1.27) (xy -2.54 1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 2.54) + (name "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 2.54) + (name "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:GND" + (power global) + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "#PWR" + (at 0 -6.35 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 0 -3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Power symbol creates a global label with name \"GND\" , ground" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "global power" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "GND_0_1" + (polyline + (pts + (xy 0 0) (xy 0 -1.27) (xy 1.27 -1.27) (xy 0 -2.54) (xy -1.27 -1.27) (xy 0 -1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "GND_1_1" + (pin power_in line + (at 0 0 270) + (length 0) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:GNDREF" + (power global) + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "#PWR" + (at 0 -6.35 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GNDREF" + (at 0 -3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Power symbol creates a global label with name \"GNDREF\" , reference supply ground" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "global power" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "GNDREF_0_1" + (polyline + (pts + (xy -0.635 -1.905) (xy 0.635 -1.905) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -0.127 -2.54) (xy 0.127 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -1.27) (xy 0 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.27) (xy -1.27 -1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "GNDREF_1_1" + (pin power_in line + (at 0 0 270) + (length 0) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:PWR_FLAG" + (power global) + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (duplicate_pin_numbers_are_jumpers no) + (property "Reference" "#FLG" + (at 0 1.905 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 0 3.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "flag power" + (at 0 0 0) + (show_name no) + (do_not_autoplace no) + (hide yes) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (symbol "PWR_FLAG_0_0" + (pin power_out line + (at 0 0 90) + (length 0) + (name "" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (symbol "PWR_FLAG_0_1" + (polyline + (pts + (xy 0 0) (xy 0 1.27) (xy -1.016 1.905) (xy 0 2.54) (xy 1.016 1.905) (xy 0 1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (embedded_fonts no) + ) + ) + (junction + (at 30.48 104.14) + (diameter 0) + (color 0 0 0 0) + (uuid "1dea3333-6fff-486d-ba31-f0620b56175c") + ) + (junction + (at 30.48 52.07) + (diameter 0) + (color 0 0 0 0) + (uuid "54fa00f2-dbd8-448d-8ddb-646dce66ed53") + ) + (junction + (at 367.62 117.46) + (diameter 0) + (color 0 0 0 0) + (uuid "5a3d60a0-20ee-4f7f-a8f0-acc13c084c15") + ) + (junction + (at 30.48 114.3) + (diameter 0) + (color 0 0 0 0) + (uuid "7aa71794-78b4-4823-8e62-2240c3e8aadf") + ) + (junction + (at 30.48 44.45) + (diameter 0) + (color 0 0 0 0) + (uuid "8340e2ac-044d-4df5-8b40-00726576e662") + ) + (junction + (at 36.83 76.2) + (diameter 0) + (color 0 0 0 0) + (uuid "b6680902-df20-453c-852a-4b6f40cdf66c") + ) + (no_connect + (at 346.76 62.54) + (uuid "019c224e-5f83-4211-aadb-67dbdaf6b619") + ) + (no_connect + (at 377.24 77.78) + (uuid "1a64f8cf-cafd-4dec-b1de-f591c79d2898") + ) + (no_connect + (at 100.33 74.93) + (uuid "2c96de3b-c87e-4648-a4de-adb0d310b25a") + ) + (no_connect + (at 396.92 47.62) + (uuid "33716798-2af8-4bbb-be33-657a15c17a35") + ) + (no_connect + (at 346.76 54.92) + (uuid "38d3c7b1-0720-4562-b184-3bfaf4faafc1") + ) + (no_connect + (at 396.92 82.62) + (uuid "40812909-78b3-4944-a8bb-8f101455ae9e") + ) + (no_connect + (at 396.92 37.46) + (uuid "424be76c-30eb-46bf-a391-ca1d2a94594c") + ) + (no_connect + (at 346.76 52.38) + (uuid "4811677e-fe2a-463d-b0fe-59f41c522777") + ) + (no_connect + (at 396.92 87.7) + (uuid "4c9331e5-900d-43ad-95d7-911c1804aa14") + ) + (no_connect + (at 377.24 72.7) + (uuid "505c05b6-b8a1-4a09-8832-64ef502fa73e") + ) + (no_connect + (at 119.38 57.15) + (uuid "61b911e0-14fe-4ed1-b311-dd2d324c792c") + ) + (no_connect + (at 396.92 72.46) + (uuid "68f3a3ef-c466-4271-a33b-e2db78768b14") + ) + (no_connect + (at 396.92 42.54) + (uuid "6b54bd06-5620-4b7e-90e6-40dcdda78587") + ) + (no_connect + (at 346.76 67.62) + (uuid "6ea29bda-a712-4ecd-a66a-8ec3932d2e38") + ) + (no_connect + (at 119.38 74.93) + (uuid "6f128d49-ffcb-4d7a-8ea2-e7ac83a6bcd9") + ) + (no_connect + (at 396.92 64.84) + (uuid "73fa88ba-1d1f-4882-82a7-066c8698c742") + ) + (no_connect + (at 118.11 151.13) + (uuid "7b412fa9-b66c-4afb-8949-eefb28300cc2") + ) + (no_connect + (at 346.76 82.86) + (uuid "7def7fea-19a1-4986-814d-5d623e83034a") + ) + (no_connect + (at 100.33 36.83) + (uuid "80bd8bab-4a4e-4ecc-9e39-4715780ab3a1") + ) + (no_connect + (at 396.92 67.38) + (uuid "814b367a-92cb-4fee-af37-2e8374b3131d") + ) + (no_connect + (at 377.24 62.54) + (uuid "84d043ee-95db-49f5-9e8e-2b0a2f9330ea") + ) + (no_connect + (at 396.92 69.92) + (uuid "8678d0f7-9be0-438d-b6cc-eab58c2af64d") + ) + (no_connect + (at 100.33 67.31) + (uuid "88cb4fd7-9e90-4142-9eeb-f9fca5ded373") + ) + (no_connect + (at 346.76 72.7) + (uuid "88de2548-52e9-4de7-9ad4-955c63df92fe") + ) + (no_connect + (at 100.33 41.91) + (uuid "89ce46fb-c44a-4833-b661-3ced15c6060c") + ) + (no_connect + (at 346.76 65.08) + (uuid "89d257dc-74fb-45ad-9a3b-a218a0cb5224") + ) + (no_connect + (at 346.76 75.24) + (uuid "8f350c87-bf86-43e7-b58f-1eba3a63287c") + ) + (no_connect + (at 50.8 25.4) + (uuid "92a88c90-d077-4b9f-abaa-2fbbf8696aa4") + ) + (no_connect + (at 377.24 60) + (uuid "96a58875-334b-45b6-a7e1-5caeb760f367") + ) + (no_connect + (at 396.92 40) + (uuid "9b9fe826-9a13-4797-9be1-98ab3583642e") + ) + (no_connect + (at 346.76 80.32) + (uuid "a5e45b4b-ca1e-4cc2-a632-5a6a551985fb") + ) + (no_connect + (at 346.76 57.46) + (uuid "a6905b08-b1ed-4e04-bde0-b9a4f6b3b477") + ) + (no_connect + (at 272.22 232.78) + (uuid "a788c55b-417d-45a3-ba49-9b49a9d1570f") + ) + (no_connect + (at 396.92 80.08) + (uuid "a7f1c9c6-d09a-4e94-a84b-2d53da82d174") + ) + (no_connect + (at 377.24 42.22) + (uuid "b06df9c1-e29e-4ffb-a14b-4adb95b35969") + ) + (no_connect + (at 100.33 39.37) + (uuid "b296d711-b9dc-414f-9cfa-78246c1a741d") + ) + (no_connect + (at 346.76 70.16) + (uuid "bba28c38-dd15-4afc-8ac6-4861d3c5dcc2") + ) + (no_connect + (at 50.8 27.94) + (uuid "bc9ff7e8-11c6-4810-bbd1-b10ff1532106") + ) + (no_connect + (at 377.24 44.76) + (uuid "cb2d9f1d-a760-4dc0-80c0-d64707739797") + ) + (no_connect + (at 346.76 77.78) + (uuid "cb8e9ed2-222a-43d3-901e-a10c81b93c26") + ) + (no_connect + (at 377.24 65.08) + (uuid "cc8e8c37-cb5b-4896-9947-96b0d0396425") + ) + (no_connect + (at 396.92 75) + (uuid "d1dc53bf-e614-4bd3-a294-993a75a8d16a") + ) + (no_connect + (at 100.33 44.45) + (uuid "d2951a90-8039-4bbc-9ffe-947751ddda96") + ) + (no_connect + (at 396.92 77.54) + (uuid "d4b4b762-f0bc-402e-ae03-decd9f29a5d7") + ) + (no_connect + (at 119.38 54.61) + (uuid "db567d29-a47a-4f17-aea7-70a29c513b02") + ) + (no_connect + (at 377.24 49.84) + (uuid "dc26475a-480c-4d8c-b31f-c5ebe4da39ba") + ) + (no_connect + (at 396.92 45.08) + (uuid "e4ad8d31-06b2-41e3-82d2-ea45ce6bd621") + ) + (no_connect + (at 119.38 59.69) + (uuid "e7bc2b41-ed79-46c4-b9a8-2b6f6db42204") + ) + (no_connect + (at 119.38 77.47) + (uuid "ed2d54ef-41af-4085-b217-727c441d4fd1") + ) + (no_connect + (at 377.24 67.62) + (uuid "f08fb453-e568-40c5-8f8e-31b15765188d") + ) + (no_connect + (at 396.92 50.16) + (uuid "f2defdf0-eda9-4470-b141-a3133cd44533") + ) + (no_connect + (at 396.92 85.16) + (uuid "f58a8e28-3d40-4267-a7a4-e1268f81b90e") + ) + (no_connect + (at 377.24 70.16) + (uuid "f90cb997-1195-4e44-b80a-dcc6f85b4d08") + ) + (no_connect + (at 346.76 60) + (uuid "fa367931-dc63-482f-91fd-e6e283b81732") + ) + (wire + (pts + (xy 208.28 128.27) (xy 208.28 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "02766857-cbae-49f3-a4f6-729b5913e4f8") + ) + (wire + (pts + (xy 177.8 71.12) (xy 177.8 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "05b72508-1b3c-474b-8078-7c9287eac15a") + ) + (wire + (pts + (xy 99.06 69.85) (xy 100.33 69.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "06c3a53f-9def-4275-a30f-3fb760e89331") + ) + (wire + (pts + (xy 152.4 224.79) (xy 139.7 219.71) + ) + (stroke + (width 0) + (type default) + ) + (uuid "06dbe403-879a-4cad-b0ea-9cadf220bf40") + ) + (wire + (pts + (xy 242.57 118.11) (xy 242.57 116.84) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0766e5f3-b989-42fe-a85c-f9e261053980") + ) + (wire + (pts + (xy 228 218.19) (xy 228 213.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0c933592-a563-4544-90b0-40012955032c") + ) + (wire + (pts + (xy 370 236.19) (xy 360 243.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "12b3a208-73bd-4935-a901-79698bd19742") + ) + (wire + (pts + (xy 106.68 20.32) (xy 106.68 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "155f3dd3-a422-4d5c-bab8-0476605c7f21") + ) + (wire + (pts + (xy 217.17 87.63) (xy 217.17 85.09) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1650d9b9-2645-4db7-a1e0-2bf7fbe16612") + ) + (wire + (pts + (xy 386 136.19) (xy 386 131.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "189735fa-d7b0-472b-8411-cfe0aaa9a229") + ) + (wire + (pts + (xy 40.64 76.2) (xy 36.83 76.2) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1d4aca69-6520-4078-81b9-73e2f0247d8d") + ) + (wire + (pts + (xy 25.4 44.45) (xy 30.48 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "241d542b-0844-4f9d-a61f-18087ad7bbe2") + ) + (wire + (pts + (xy 111.76 121.92) (xy 111.76 123.19) + ) + (stroke + (width 0) + (type default) + ) + (uuid "242cebb1-3880-491f-acfb-849e6cc4745c") + ) + (wire + (pts + (xy 30.48 114.3) (xy 43.18 114.3) + ) + (stroke + (width 0) + (type default) + ) + (uuid "27b1a645-32fa-4781-87c6-87dde864adc3") + ) + (wire + (pts + (xy 247.65 33.02) (xy 271.78 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "294e904d-4c3b-4013-b4b8-3bfd41121bae") + ) + (wire + (pts + (xy 30.48 139.7) (xy 30.48 140.97) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2b09c450-850d-42f6-81f9-96c3c55d45b6") + ) + (wire + (pts + (xy 352 144.19) (xy 348 143.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2da888b2-5344-4c54-b872-1332930b7155") + ) + (wire + (pts + (xy 120.65 82.55) (xy 119.38 82.55) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2df77661-1a0c-4d05-94dd-d2fca60bda73") + ) + (wire + (pts + (xy 50.8 76.2) (xy 48.26 76.2) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2e2c4ea2-d0b1-4931-aed4-9449bf1c467c") + ) + (wire + (pts + (xy 99.06 57.15) (xy 100.33 57.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "30802635-43c6-412b-891e-3e3b553ff2b8") + ) + (wire + (pts + (xy 177.8 83.82) (xy 177.8 80.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "326198fc-bd6d-458d-9a89-b432459e56cd") + ) + (wire + (pts + (xy 161.29 71.12) (xy 161.29 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "32a50af6-a6b2-4087-9f7d-b46c628eb8c8") + ) + (wire + (pts + (xy 179.07 140.97) (xy 179.07 142.24) + ) + (stroke + (width 0) + (type default) + ) + (uuid "370a24e1-0269-43af-9fbf-c799aa12e18f") + ) + (wire + (pts + (xy 99.06 62.23) (xy 100.33 62.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3782fc93-2fd9-47ba-ae0d-6910be6231a3") + ) + (wire + (pts + (xy 43.18 114.3) (xy 43.18 113.03) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3960a20c-cf88-40e8-b31b-f4515919df22") + ) + (wire + (pts + (xy 248.92 252) (xy 245.08 252) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3cf4524d-a4e4-4730-8654-7b7a718b0fe0") + ) + (wire + (pts + (xy 99.06 49.53) (xy 100.33 49.53) + ) + (stroke + (width 0) + (type default) + ) + (uuid "412e002c-f046-4bcb-a409-11b8be8e2cba") + ) + (wire + (pts + (xy 143.51 20.32) (xy 143.51 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4183080a-4381-46d6-a8b7-28cd1eb12f5f") + ) + (wire + (pts + (xy 274.32 110.49) (xy 274.32 109.22) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4460083a-0932-4844-b1c9-692d221f3d6e") + ) + (wire + (pts + (xy 177.8 234.19) (xy 177.8 226.06) + ) + (stroke + (width 0) + (type default) + ) + (uuid "44d39bf5-fe60-430f-811a-92bb2f7f93c9") + ) + (wire + (pts + (xy 120.65 85.09) (xy 119.38 85.09) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4d1c3ee0-a05c-4f75-b413-012265da5b55") + ) + (wire + (pts + (xy 31.75 154.94) (xy 31.75 156.21) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4e79b4d8-7315-451b-92d3-9a3844a39c20") + ) + (wire + (pts + (xy 99.06 82.55) (xy 100.33 82.55) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5213793d-531b-47df-8cea-bac40ff57967") + ) + (wire + (pts + (xy 179.07 152.4) (xy 179.07 149.86) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5243ed60-1739-4000-8721-13df3c08f4d4") + ) + (wire + (pts + (xy 120.65 72.39) (xy 119.38 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "53203ae8-44c9-4d18-bed6-1602485431a1") + ) + (wire + (pts + (xy 354 218.19) (xy 354 213.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "53c0f5c9-5cb5-4c7e-b914-d18a6136406b") + ) + (wire + (pts + (xy 30.48 52.07) (xy 43.18 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5761c200-8bbc-4b50-b395-36b11204e2c1") + ) + (wire + (pts + (xy 26.67 104.14) (xy 30.48 104.14) + ) + (stroke + (width 0) + (type default) + ) + (uuid "598d2fc5-a5ee-4763-8ab6-023be945e80f") + ) + (wire + (pts + (xy 86.36 123.19) (xy 86.36 120.65) + ) + (stroke + (width 0) + (type default) + ) + (uuid "643ca470-03f2-4fce-bf0f-96f0b0ba0453") + ) + (wire + (pts + (xy 82.55 189.23) (xy 76.2 189.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "66ed9eeb-8c74-4194-88d4-4cad47822b3d") + ) + (wire + (pts + (xy 224.79 90.17) (xy 224.79 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6b66dbbd-c382-4e6e-afe6-345632703cf5") + ) + (wire + (pts + (xy 96.52 20.32) (xy 96.52 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6c94c748-35a7-45e6-8d9c-4bd142b3a6e9") + ) + (wire + (pts + (xy 204.47 146.05) (xy 204.47 147.32) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6dc75b5f-fa03-485f-8fd4-8df7c063fc65") + ) + (wire + (pts + (xy 116.84 20.32) (xy 116.84 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6f75153d-b269-42e1-98c0-4fc39a37ce54") + ) + (wire + (pts + (xy 134.62 20.32) (xy 134.62 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "715f0b8b-96ed-4e46-8de3-6ad8958470a5") + ) + (wire + (pts + (xy 120.65 49.53) (xy 119.38 49.53) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7279ae0b-eecc-4601-a5cf-016baa5cf530") + ) + (wire + (pts + (xy 125.73 20.32) (xy 125.73 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7396afa6-c085-4266-8a71-5713468c17c9") + ) + (wire + (pts + (xy 99.06 77.47) (xy 100.33 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7721c000-5374-4e7e-9234-ab22c30410b3") + ) + (wire + (pts + (xy 107.95 167.64) (xy 107.95 166.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7893342c-e878-4a55-b15e-fcbc06fdbbe8") + ) + (wire + (pts + (xy 128.27 133.35) (xy 128.27 132.08) + ) + (stroke + (width 0) + (type default) + ) + (uuid "79377557-91fd-4c94-8006-ebaaf93d8435") + ) + (wire + (pts + (xy 27.94 76.2) (xy 36.83 76.2) + ) + (stroke + (width 0) + (type default) + ) + (uuid "79fa1642-b2d6-42e2-8863-45347de73640") + ) + (wire + (pts + (xy 43.18 104.14) (xy 43.18 105.41) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7b0e894f-4107-4ac2-9170-eec62b3cd6cd") + ) + (wire + (pts + (xy 120.65 69.85) (xy 119.38 69.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7f2e370d-1e8d-4b6c-9046-77e41321cf05") + ) + (wire + (pts + (xy 25.4 21.59) (xy 30.48 21.59) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8275ca94-123e-4de5-bf5e-e460fd915e2b") + ) + (wire + (pts + (xy 120.65 52.07) (xy 119.38 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8642574e-c692-46c1-8a86-98c8c23e6aec") + ) + (wire + (pts + (xy 99.06 59.69) (xy 100.33 59.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "87e7c44e-5d3f-4832-a73e-462782cc36a9") + ) + (wire + (pts + (xy 30.48 149.86) (xy 30.48 148.59) + ) + (stroke + (width 0) + (type default) + ) + (uuid "88496774-3742-4a04-b216-7029f929f19b") + ) + (wire + (pts + (xy 30.48 44.45) (xy 43.18 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "893b7e41-db5c-451c-9f5a-873a2a287867") + ) + (wire + (pts + (xy 99.06 54.61) (xy 100.33 54.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8aa5f603-1a89-46a5-9eed-59b17669426f") + ) + (wire + (pts + (xy 76.2 129.54) (xy 76.2 130.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8f340026-70f1-495a-b3ff-67db54abdaca") + ) + (wire + (pts + (xy 156.21 114.3) (xy 156.21 111.76) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8fbc4b3b-7d71-4069-84ea-8ea74838ab6e") + ) + (wire + (pts + (xy 30.48 114.3) (xy 30.48 115.57) + ) + (stroke + (width 0) + (type default) + ) + (uuid "91ef4789-8854-414a-9707-12149f356675") + ) + (wire + (pts + (xy 111.76 133.35) (xy 111.76 130.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "924155aa-ef19-41cb-8a58-860266d3d83e") + ) + (wire + (pts + (xy 67.31 20.32) (xy 66.04 20.32) + ) + (stroke + (width 0) + (type default) + ) + (uuid "95638607-44ca-41a9-8be3-294cebef868e") + ) + (wire + (pts + (xy 204.47 157.48) (xy 204.47 154.94) + ) + (stroke + (width 0) + (type default) + ) + (uuid "95670dab-17d0-46fa-8482-5c9ce86ae1f3") + ) + (wire + (pts + (xy 153.67 134.62) (xy 153.67 132.08) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9a42641c-b807-4b16-8bb2-bcb0e86ebd88") + ) + (wire + (pts + (xy 322 204.19) (xy 322 199.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9bdee13f-2626-47ca-983a-7012a24acbed") + ) + (wire + (pts + (xy 99.06 52.07) (xy 100.33 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9c00703d-3ba5-4bd5-8494-283efdc67101") + ) + (wire + (pts + (xy 76.2 140.97) (xy 76.2 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9c2c8509-cc26-4637-905b-dd48ca511d11") + ) + (wire + (pts + (xy 30.48 113.03) (xy 30.48 114.3) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a128bfae-4049-4258-97bb-ca0508806059") + ) + (wire + (pts + (xy 30.48 21.59) (xy 30.48 22.86) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a2844e63-668b-48d4-9324-70e96206ce9a") + ) + (wire + (pts + (xy 99.06 80.01) (xy 100.33 80.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a4b49458-e33c-4d95-bca6-857491d371a6") + ) + (wire + (pts + (xy 185.42 114.3) (xy 185.42 110.49) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a5b14191-451f-4af3-b3f8-ba061b064682") + ) + (wire + (pts + (xy 274.32 97.79) (xy 274.32 99.06) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a7ff458a-dd4a-42b4-a442-fae07248b518") + ) + (wire + (pts + (xy 160.02 154.94) (xy 160.02 153.67) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b01276c7-8fa8-49be-b983-c9e0fa844067") + ) + (wire + (pts + (xy 36.83 73.66) (xy 36.83 76.2) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b2a8f611-bdfe-4666-9297-e31ce0500adb") + ) + (wire + (pts + (xy 224.79 100.33) (xy 224.79 99.06) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ba021564-391b-4bb1-ad8e-b5671570cf44") + ) + (wire + (pts + (xy 161.29 82.55) (xy 161.29 80.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c1ff58aa-6c0f-4595-aefe-61b4883ae760") + ) + (wire + (pts + (xy 372.19 124) (xy 367.62 117.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c234a3a1-0976-4f39-8bbe-0342f514b43a") + ) + (wire + (pts + (xy 30.48 104.14) (xy 30.48 105.41) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c55ca7fe-4a05-448c-ad74-48a3a35a3ee1") + ) + (wire + (pts + (xy 88.9 224.79) (xy 88.9 219.71) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c75eec39-70f5-4dd4-8972-24cdb7c40962") + ) + (wire + (pts + (xy 271.78 35.56) (xy 264.16 35.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cffda71c-90f7-463c-8d8e-b3581f8b7c51") + ) + (wire + (pts + (xy 370.54 204.92) (xy 364.92 192.62) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d3092eb2-9bf1-4e5c-8a9c-2ace1fdf3599") + ) + (wire + (pts + (xy 99.06 64.77) (xy 100.33 64.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d71e6c5e-4bba-4e68-a0eb-badab8b4aa5b") + ) + (wire + (pts + (xy 262.92 252) (xy 259.08 252) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d86ce535-914c-4719-b1c4-f7bde276de2b") + ) + (wire + (pts + (xy 86.36 109.22) (xy 86.36 110.49) + ) + (stroke + (width 0) + (type default) + ) + (uuid "db796fb1-7c18-468e-979a-0a1a21c0346b") + ) + (wire + (pts + (xy 238.76 33.02) (xy 240.03 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "df823740-5b93-4bb0-aa66-6d4d1987ff59") + ) + (wire + (pts + (xy 153.67 123.19) (xy 153.67 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e1b5fb14-461b-45eb-b191-0597b57bbaad") + ) + (wire + (pts + (xy 30.48 102.87) (xy 30.48 104.14) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e7176a69-f412-4a16-9ce2-b591060cb301") + ) + (wire + (pts + (xy 30.48 40.64) (xy 30.48 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e72a37b6-67f1-443b-988d-8885f8dde37e") + ) + (wire + (pts + (xy 30.48 17.78) (xy 25.4 21.59) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e910f252-d264-4a84-9544-3034a7e50510") + ) + (wire + (pts + (xy 30.48 52.07) (xy 30.48 54.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e9228f8a-4201-4991-9f4f-81c479e0b505") + ) + (wire + (pts + (xy 161.29 63.5) (xy 161.29 60.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "eb270f93-f364-4712-9be9-aef980e315c8") + ) + (wire + (pts + (xy 156.21 100.33) (xy 156.21 101.6) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f00bc842-8965-40c5-84b4-282a022a954d") + ) + (wire + (pts + (xy 180.34 50.8) (xy 180.34 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f03b32dd-5599-41c9-91eb-75bc866f7dcf") + ) + (wire + (pts + (xy 185.42 101.6) (xy 185.42 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f58fd259-65b5-4528-acc5-29fe16ff3067") + ) + (wire + (pts + (xy 30.48 104.14) (xy 43.18 104.14) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f6c23970-0a3f-4f25-8e05-093b83451921") + ) + (wire + (pts + (xy 372.19 112) (xy 367.62 117.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f91471be-f6df-4bf7-871a-d59294f89bd5") + ) + (wire + (pts + (xy 36.83 66.04) (xy 36.83 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fbac858f-21c7-470d-981e-2234bc193681") + ) + (wire + (pts + (xy 31.75 165.1) (xy 31.75 163.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fc99ef60-bc1c-49f9-9d42-d945b42c343d") + ) + (wire + (pts + (xy 82.55 173.99) (xy 76.2 173.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fd4a7d57-5c78-40f8-9e72-f3883246bf8c") + ) + (wire + (pts + (xy 149.86 20.32) (xy 149.86 19.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fe2cd5f0-5c89-4f10-a21c-cc86869b95d4") + ) + (label "DIN_4G" + (at 396.92 34.92 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "005ebba8-741b-4d9a-8bea-18a98bb32a65") + ) + (label "VEH5V" + (at 228 192.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "025a8fa3-6f97-460a-bb39-bfbfb0747233") + ) + (label "GND" + (at 101.6 245.11 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0297e269-e578-4487-b13a-c0a76dcac7c3") + ) + (label "GND" + (at 101.6 232.41 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "02ae5d6e-11ff-438e-b056-5c898afaceb6") + ) + (label "MAIN5V" + (at 259.08 252 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0343f5e8-48c1-4ef1-9ce1-6ca6dd7c44fb") + ) + (label "5V_FAN" + (at 152.4 232.41 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0419f264-c460-42fb-b103-3b8131a03ad3") + ) + (label "GND" + (at 252 225.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "04b59924-b596-4c34-bdad-25246c36f139") + ) + (label "3V3" + (at 116.84 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "060cfd85-b01d-4dcd-8ea3-5e8f6cfc246d") + ) + (label "KCOIL" + (at 387.81 198 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "065b01c8-aaa4-4205-b23b-bdca41cdd52e") + ) + (label "SW_5V" + (at 348 152.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "06c187f1-7f0e-46ac-98fd-d6338cb5bb11") + ) + (label "GND" + (at 440 92.86 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "076eec60-c008-4e00-af37-5a7bae91dec5") + ) + (label "GND" + (at 334 199.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "079fe846-ad7f-4f8e-a08a-06fe4a68ccd7") + ) + (label "F0_SEL" + (at 272.22 222.62 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "07fd223d-bf82-40ba-ae45-623b7a0afa14") + ) + (label "PFI" + (at 272.22 197.22 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0801ff0b-8f0b-49d3-98be-4ffebbe5292b") + ) + (label "VEH5V" + (at 240 206.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "08749f67-dde6-4828-a21a-fe1ebce5ec45") + ) + (label "IGN_IN" + (at 50.8 22.86 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0887f17b-380d-4c21-b188-33eb5e4b3bd8") + ) + (label "GND" + (at 228 199.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "08e6517f-f812-412d-b450-d4f31feaeeab") + ) + (label "BLED4" + (at 300 89.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "08eef911-a217-459e-8340-7b30c4f49ca0") + ) + (label "VEH5V" + (at 228 206.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "09326292-0d58-4b91-afae-cd47b99dae78") + ) + (label "GND" + (at 440 92.86 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "095e1de1-9933-4d78-ae95-c94ff6e0b48f") + ) + (label "SW_5V" + (at 352.38 114.92 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0a43b0e9-c7f6-46a7-b569-6c32bb73da3c") + ) + (label "BATLED1" + (at 300 28.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0ac3539d-9202-485f-99e2-dc4f56ca30df") + ) + (label "GND" + (at 143.51 241.3 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0ad30750-4220-48ed-9b08-507812b0dc01") + ) + (label "EN_FAN" + (at 101.6 237.49 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0b0ff1a1-d279-4126-9eb7-e21c89728ef5") + ) + (label "24V_IN" + (at 55.88 157.48 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0b20571c-9fcc-46a2-8de9-3b2e5b750cb4") + ) + (label "GND" + (at 386 143.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0b421b95-106a-426c-90cc-17f16544ac9c") + ) + (label "MAIN5V" + (at 334 192.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0b78d8be-550a-4072-898c-1929b002c290") + ) + (label "BAT_PLUS" + (at 30.48 33.02 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0c8f419b-5285-4ec4-80a4-6625718c7e6e") + ) + (label "3V3_MODEM" + (at 396.92 80.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0cff0cf8-36e7-4da4-8e14-c9b498e8a68e") + ) + (label "GND" + (at 396.92 87.7 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0da6423e-e40a-4489-b58a-724d92735555") + ) + (label "GND" + (at 177.8 241.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0eb8a2b7-1870-45b0-8047-a7cb1f9d2e4b") + ) + (label "IGATE" + (at 307.78 202.3 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "107c3edc-5bab-41af-9ead-3fb37f10a019") + ) + (label "GND" + (at 344 199.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "10b1e221-0402-417d-8070-194df213f2d0") + ) + (label "SW_BAT" + (at 320.19 178 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "10b76b77-ccee-4029-98b5-2df0a666f868") + ) + (label "MAIN5V" + (at 307.78 207.38 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "11168104-3afa-4087-9e1b-45d0b62b4be9") + ) + (label "IGN_SENSE" + (at 29.21 76.2 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "114a6fe8-1170-4515-9a46-99bfb49ca361") + ) + (label "SW_5V" + (at 224.79 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "119ad74d-ee7e-42a5-ba9b-9da3196454cc") + ) + (label "GND" + (at 360 130.16 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "12350029-fec4-4fe7-8245-53c57b0b923d") + ) + (label "SW_FAN" + (at 134.62 226.06 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "130fa05a-02db-4240-8be6-23c1a234004c") + ) + (label "5V_FAN" + (at 214.63 139.7 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "13462acf-bad8-4579-8ce9-8705f3350275") + ) + (label "BLED2" + (at 318.81 50 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1686b4e8-e4a7-4c13-a6e2-f2eca8e9e854") + ) + (label "3V3_MODEM" + (at 394 108.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "16a8e7eb-5a77-4ff9-bfa7-d7e5abd36c39") + ) + (label "IGATE" + (at 242.38 186 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "16c8a7f1-9bdf-47d7-a331-4c5b40f3891e") + ) + (label "FAN_PWM" + (at 204.47 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "172d67ec-2a4a-4654-b5ff-3b5ecd241f13") + ) + (label "FAN_TACH" + (at 160.02 154.94 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "175d9b99-fa12-46a8-8f05-5e548cd1b890") + ) + (label "24V" + (at 119.38 223.52 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "18fb0c8d-f4d4-4e08-80f7-42867234eac3") + ) + (label "MAIN5V" + (at 247.46 193.62 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "193d50a4-5c72-4c8f-b792-de405fa60a10") + ) + (label "GND" + (at 470 58.81 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "197c4d67-e14e-430a-9bea-167eec396212") + ) + (label "I2C_SCL" + (at 66.04 179.07 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "1b136a82-7c67-464f-bf47-6920be93686d") + ) + (label "SYS5V" + (at 161.29 53.34 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "1b91f48e-bff3-41ba-aa3a-ef18b9725493") + ) + (label "F2_SEL" + (at 240 255.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1c87e614-b705-43c1-9571-0731cd19ce85") + ) + (label "GND" + (at 273.08 252 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1d45b714-bd7a-4c6e-85ad-4e7a93e56bed") + ) + (label "3V3" + (at 99.06 80.01 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "1d5656dc-e27c-441a-a8db-5c8a89da32c9") + ) + (label "3V3" + (at 160.02 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1d7eb9e9-16f3-4832-a104-4224e148fdd9") + ) + (label "VEH5V" + (at 244.19 172 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "1feb0c53-9af8-43f6-9514-ffaa52170d27") + ) + (label "3V3" + (at 377.24 47.3 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1ffc045b-2d62-48af-bd3f-b3a0ba6e21bd") + ) + (label "BATLED2" + (at 300 46.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "20fb3fe1-023b-4772-aa5c-c3a98db1d27f") + ) + (label "BLED1" + (at 300 35.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "21996d32-1670-4137-8e26-58f2d07370fa") + ) + (label "GND" + (at 396.92 37.46 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "21ef7a31-6544-4263-ada0-9f44a55f1509") + ) + (label "GND" + (at 396.92 52.7 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "21ffab83-0354-4ca1-b440-98fad1000641") + ) + (label "CHRG_FAULT" + (at 294 255.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "23ba7a4f-c21c-4b37-9c7c-61e45422bdde") + ) + (label "BAT_PLUS" + (at 307.78 220.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2501d32f-bde9-439c-a3da-c06940247f49") + ) + (label "GNSS_RX" + (at 99.06 57.15 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "253305d5-99e0-4d6b-8e08-c1f6711de525") + ) + (label "24V" + (at 86.36 123.19 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "26a8f72f-c2a9-48dd-89dc-d0e9b4dbdc0a") + ) + (label "IGN_SENSE" + (at 36.83 73.66 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "28226e0c-f0a3-477a-b13f-d0f69ffe7be5") + ) + (label "PWR_CTRL" + (at 99.06 52.07 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "283163fd-b650-4716-953f-363d526d8aa1") + ) + (label "GND" + (at 311.19 86 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "285629dd-6d20-4894-a0bf-7910c3194507") + ) + (label "Q10_GATE" + (at 85.09 100.33 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2942f717-eb5a-440f-86b1-4d5d979c357b") + ) + (label "GND" + (at 25.4 21.59 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "29b7512e-6047-4feb-844e-01dff23056fd") + ) + (label "GND" + (at 396.92 64.84 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "29dcd5f7-361a-49cb-9b44-23e70c0ff91c") + ) + (label "LED_K" + (at 238.76 33.02 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2a2cf193-f04e-4acc-93ab-02d965692694") + ) + (label "VEH5V" + (at 195.58 228.6 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2a3cbbcf-b3df-4a03-ab75-74cccad50200") + ) + (label "FAN_RET" + (at 222.25 139.7 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2a9bf73e-da0f-49c3-9d74-0384d01ea8a3") + ) + (label "24V" + (at 128.27 124.46 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2ae78cc3-d8aa-4b93-9780-e43a47d31ba5") + ) + (label "GND" + (at 344 135.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2afd9606-9209-4e9a-92fe-195fdf606027") + ) + (label "LED_K" + (at 274.32 97.79 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2b515514-43a2-4394-9a75-dab2a5366d64") + ) + (label "EN_FAN" + (at 119.38 226.06 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2bbf49dc-e2d7-49d6-902c-17bca1b64552") + ) + (label "SW_5V" + (at 377.24 39.68 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2bf8402e-dd83-4153-8d5d-f51fddbcb7a2") + ) + (label "USART1_RX" + (at 242.57 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2cda8fd7-3677-4574-88f7-49bb70aa7bcf") + ) + (label "SW_FAN" + (at 135.89 241.3 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2d12200c-2edf-4cd9-b426-05cf0fe86c37") + ) + (label "MAIN5V" + (at 106.68 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2e013394-2da9-4b13-9b45-d920ad7ce7de") + ) + (label "USART1_RX" + (at 372.54 177.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2e2cf1a9-b2bd-4273-b846-fa3ae53065a8") + ) + (label "MODEM_LED" + (at 396.92 82.62 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2f29d753-8a51-49f3-915d-da9298fcf16a") + ) + (label "FAN_GATE" + (at 153.67 123.19 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2f2f6456-366f-4536-92d6-ee293879fd4e") + ) + (label "GNSS_TX" + (at 99.06 54.61 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2f3d61ad-fce6-4b87-a59f-dab759e66659") + ) + (label "VFB_BST" + (at 322 199.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2f9e00f9-ef20-40c3-9fe2-bf98876089eb") + ) + (label "GND" + (at 245.08 252 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2fd83ddb-b7ff-45aa-a6f8-f1fc48eaf566") + ) + (label "GND" + (at 294.92 130.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "302c8709-9098-4ca2-91d4-e38023c6a624") + ) + (label "GND" + (at 290 237.86 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "310aa370-751b-4e67-9902-d809c2e617fd") + ) + (label "BST3" + (at 367.62 114.92 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "3147498b-9a30-4c89-867e-ff52c0b6afa1") + ) + (label "I2C_SDA" + (at 66.04 184.15 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "32839549-3585-43fd-890c-4c1aa4b60602") + ) + (label "I2C_SCL" + (at 97.79 153.67 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3371b5f5-a1c7-46a9-b5b3-dfa2052bc181") + ) + (label "USB_DP" + (at 455.24 72.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "34b520d7-a5a1-4ba9-8599-27080f3e3486") + ) + (label "GND" + (at 274.32 110.49 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "34e515e9-03ed-4c64-99a4-3b694dcbd174") + ) + (label "I2C_SDA" + (at 152.4 190.5 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "360dbe97-de6e-4756-9f8a-a52e4180ede6") + ) + (label "COMP_FAN" + (at 119.38 233.68 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "372d7c6e-8478-4376-add2-5b1d953ca063") + ) + (label "3V3" + (at 107.95 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "37d24fc3-1855-4403-8dfc-e29226fe36d4") + ) + (label "FAN_TACH" + (at 179.07 152.4 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "38543283-08bd-4af1-abab-cf845c3b2511") + ) + (label "FAN_RET" + (at 208.28 116.84 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "38c9da34-17f2-4d78-963e-e77d57f10d0f") + ) + (label "GATE_LS" + (at 180.34 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "38e1405a-4b8b-4c57-a9d4-bae4370ef3b7") + ) + (label "24V_IN" + (at 50.8 17.78 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "39847511-fc4d-4392-9541-62156d2326c8") + ) + (label "NTC" + (at 30.48 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3a09a49d-085a-4a92-8960-425278f77be5") + ) + (label "GND" + (at 66.04 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3a24cdba-f18b-4df4-95be-2ba4acf56247") + ) + (label "FB_FAN" + (at 119.38 231.14 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3a290412-65f9-49d1-aff9-12e40fa5c1f1") + ) + (label "SW_IN" + (at 217.17 87.63 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3b80bbe3-b6d2-4c33-bbe7-3496e241b55c") + ) + (label "I2C_SDA" + (at 97.79 151.13 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3b8a2955-7380-40a1-af84-68f890358b6b") + ) + (label "USB_VBUS" + (at 455.24 54.76 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "3b94592f-2a42-468e-8624-8934c9442a7d") + ) + (label "USART1_TX" + (at 262.89 124.46 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3ba20446-fa0a-45a7-9431-18be16b108d4") + ) + (label "GND" + (at 165.1 232.41 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "3c155520-3f87-4ebf-a3c9-a214c343708f") + ) + (label "BYP_CTRL" + (at 354 206.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3dfcbfcc-be9a-483e-9687-f70d155723a2") + ) + (label "PROG" + (at 272.22 204.84 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3e354e78-192b-4f49-9207-1916f8105556") + ) + (label "CHRG_STAT" + (at 282 255.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "3e652b75-ad80-46de-92b3-e963e39b87e5") + ) + (label "IGN_IN" + (at 36.83 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "3ff6c5f7-6a9d-4668-a9f1-585f3d3eac5a") + ) + (label "NTC" + (at 240 213.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "40028b91-c9f0-46d3-961d-2049224a0096") + ) + (label "COMP_FAN" + (at 119.38 233.68 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "406ce610-4eef-4b80-a286-861bee5d7ba2") + ) + (label "FAN_GATE" + (at 200.66 121.92 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "41f2ed0f-7b32-4803-9233-f0b09ddb4fcc") + ) + (label "GND" + (at 370 243.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "42125e95-9672-45fa-9ae1-fa9904cbc53f") + ) + (label "Q10_GATE" + (at 76.2 129.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "43c46883-9294-40cb-bc24-e5597e0e31a3") + ) + (label "F2_SEL" + (at 272.22 217.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4459dd9e-63d2-4e48-bf18-45c14602f4dd") + ) + (label "GND" + (at 378.92 242.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "44739962-dfc3-41b0-925b-918bc43b78de") + ) + (label "3V3" + (at 114.3 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4483d0b5-2c21-4494-875f-e077404ef3e0") + ) + (label "MAIN5V" + (at 234.92 252 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4538c893-5fd7-40fc-8187-ef44d599f3a0") + ) + (label "3V3" + (at 282 248.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "468c5fa4-cc80-4a49-89c5-341a9fd573ea") + ) + (label "NTC_TEMP" + (at 378.92 240 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "46ab924b-a752-4430-9382-375c39363aa1") + ) + (label "GND" + (at 272.22 215 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4990931d-cf90-48d6-bdcf-a0d02b723c87") + ) + (label "GATE_LS" + (at 156.21 100.33 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4a13ec6c-49dd-4a16-9a15-391307fda779") + ) + (label "GND" + (at 107.95 167.64 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4a619233-8d58-4962-8707-2967c75cf2c8") + ) + (label "SW_FAN" + (at 134.62 226.06 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4c1e8f34-e991-405f-8261-5d8a6ae8aca1") + ) + (label "Q6_BASE" + (at 354 213.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4e10a735-f963-42fa-b23c-09d231cb9c38") + ) + (label "GNSS_TX" + (at 346.76 42.22 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4e460f51-3b4c-4f52-84cd-efe9ba3ef3a6") + ) + (label "FAN_RET" + (at 232.41 149.86 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4eda8b47-71de-4658-9301-ebf3ee244b64") + ) + (label "GNSS_RX" + (at 346.76 39.68 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4f5ffe1c-a537-41ae-ba40-83879ebb320e") + ) + (label "GND" + (at 208.28 128.27 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4f97e729-086a-49a0-9f17-3bf671b61fd2") + ) + (label "BAT_PLUS" + (at 336 174.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4fa7b461-e277-4a49-8c3c-007c32165e36") + ) + (label "FAN_TACH" + (at 99.06 77.47 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5106f0a6-0988-49be-98a6-2c2a78305c07") + ) + (label "5V_FAN" + (at 125.73 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "51508a5e-ebcd-4605-9b8b-ee1f9e90e697") + ) + (label "GND" + (at 88.9 245.11 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "52146e2c-e76f-425a-b8ed-8ae65ea28ad2") + ) + (label "5V_FAN" + (at 177.8 218.44 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "550a95e5-aca7-4027-9a1e-067b0ce8aaeb") + ) + (label "GND" + (at 50.8 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "553dee3b-002d-4ad3-a1cf-f536c056716b") + ) + (label "3V3" + (at 31.75 154.94 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5582f735-cd2c-4a79-be41-00c63a7d260f") + ) + (label "SW_BAT" + (at 307.78 215 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "568b2ab2-6eee-46d5-81a7-1cac71d11ad3") + ) + (label "KCOIL" + (at 364.92 192.62 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "56ab0013-9fea-4f6e-943b-f77725f07b09") + ) + (label "FAN_TACH_RAW" + (at 232.41 154.94 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5860fab5-2b7c-46f6-98e8-78500863f82a") + ) + (label "USB_CC1" + (at 455.24 59.84 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "58d758f9-7bea-4601-8e8a-f5a3dbd70721") + ) + (label "USB_DM" + (at 396.92 47.62 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "58eb09b3-e975-4ad6-a182-b402bccd0294") + ) + (label "5V_FAN" + (at 165.1 224.79 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "59100dfc-0c10-4431-87ac-52ef1f44f5f6") + ) + (label "5V_SENSE" + (at 26.67 104.14 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "59da4d73-046d-4681-8626-283055e3f82c") + ) + (label "USART1_RX" + (at 392.92 175.46 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5ab4db71-7029-443b-8ece-8419f42d0caa") + ) + (label "DIN_4G" + (at 392.92 178 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5c365ab7-d099-45ae-8024-f764998b4d05") + ) + (label "CHRG_FAULT" + (at 119.38 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5c943abe-f249-4bc6-9c89-42119cb78fdf") + ) + (label "24V" + (at 111.76 121.92 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5cd2bcf7-b5ee-42f1-bb24-6bcb93183fd1") + ) + (label "GND" + (at 120.65 82.55 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5dddf7b9-d4ae-4e8b-83ff-485e36e23b6f") + ) + (label "24V" + (at 101.6 212.09 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5e56eba8-5ad5-4b60-8a8d-acd97b7894cd") + ) + (label "GND" + (at 82.55 189.23 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5ff69a82-43f7-4dba-9597-1a0da201448a") + ) + (label "Q10_GATE" + (at 78.74 115.57 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "627f6071-0d51-4a1c-925b-9381089e6415") + ) + (label "CLPROG_TP" + (at 272.22 207.38 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "628d956e-fd58-4e29-990f-a96053d5b05a") + ) + (label "DOUT_4G" + (at 346.76 44.76 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "63134008-b07b-4582-8b03-eb26f5d77ef8") + ) + (label "GND" + (at 377.24 57.46 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "646005a6-11ff-4a32-b8e2-bd0ef09fe2a8") + ) + (label "BATLED1" + (at 119.38 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "64e9f680-b230-441f-87a1-e8643c36021c") + ) + (label "3V3_MODEM" + (at 379.81 112 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "64f55ac1-42d5-405c-9eec-22a0197a3175") + ) + (label "GND" + (at 311.19 50 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "65d16ff8-d594-4620-afc2-312d4b2e49f2") + ) + (label "GND" + (at 152.4 187.96 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "670d7359-74ff-421a-b9bf-6f925e25e761") + ) + (label "USB_VBUS" + (at 455.24 54.76 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6800fda1-15b0-45b7-96b8-a64e979d1d2c") + ) + (label "GND" + (at 36.83 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "680f36e4-7480-47d5-813d-82d90c696fbd") + ) + (label "24V" + (at 119.38 223.52 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "682e617d-f10d-4c69-b2c2-5cfc74fa1a6d") + ) + (label "VEH5V" + (at 307.78 225.16 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "695f314a-a5b9-468d-948f-eb104c68f2c2") + ) + (label "MAIN5V" + (at 234.92 25 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6a811624-004f-4a58-b421-fb3fd1471a91") + ) + (label "3V3" + (at 242.57 118.11 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6ae822ae-b4c5-457c-989a-9354b7c790fe") + ) + (label "USB_VBUS" + (at 396.92 42.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6b2543e7-bf0c-4c8e-b4bc-50470169fbc5") + ) + (label "GNSS_TX" + (at 264.16 144.78 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6b59e216-a5dd-4762-b69d-7d38fe14bb6e") + ) + (label "CHRG_STAT" + (at 272.22 225.16 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6c3269c4-abb0-4799-be8f-b2a3aa995447") + ) + (label "GND" + (at 128.27 133.35 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6f404b10-f009-4c4c-b64e-257555933162") + ) + (label "LED_A" + (at 255.27 33.02 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6fa74707-f15c-4695-98d7-aed080ffc943") + ) + (label "GND" + (at 185.42 114.3 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "71452c6b-c07e-488f-be32-3cf7fffe026a") + ) + (label "F1_SEL" + (at 254 255.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "71b88fee-ec2d-44a5-bdbc-c3140ee61651") + ) + (label "3V3_MODEM" + (at 394 120.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "71f788a4-6696-4c82-ae11-39305e13b07d") + ) + (label "3V3" + (at 177.8 71.12 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "72b9c79c-db5b-4565-8dee-e05d81e759bf") + ) + (label "BATLED3" + (at 119.38 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "72bc7a9b-7876-49d9-ab49-7b50dedb14e8") + ) + (label "BAT_PLUS" + (at 338 252 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7479ae35-12fb-4240-bdc0-2d8e7d66dd96") + ) + (label "SW_5V" + (at 143.51 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "74d1fd10-034c-4ece-bbad-1173500ccf8e") + ) + (label "GND" + (at 394 127.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "75736cf2-7c14-4334-b066-bc9517248be7") + ) + (label "3V3_MODEM" + (at 396.92 29.84 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "75897be2-bbf5-4aa9-8c7a-f80272b30be9") + ) + (label "BLED2" + (at 300 53.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "75f0afa8-2ae9-4395-8060-df1944165a96") + ) + (label "USB_VBUS" + (at 455.24 54.76 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "768d9324-32aa-40ba-ad84-b2fd657223eb") + ) + (label "USART1_RX" + (at 262.89 127 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "76d68778-b090-46d5-99e2-071e090753da") + ) + (label "BST_FAN" + (at 139.7 212.09 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "798eac46-5c46-4cb0-a0f1-b8dc8c16c0b3") + ) + (label "3V3" + (at 152.4 185.42 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "79e5d6a5-e650-4d1b-9fa2-404f6348c96b") + ) + (label "GND" + (at 240 225.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "79fe372b-ae9c-44de-a4b7-63aee87974f3") + ) + (label "BAT_PLUS" + (at 327.81 178 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7aad3201-1a19-4b5d-a636-86a28c7169b7") + ) + (label "NRST" + (at 294.92 128 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "7aad7216-4750-4aaf-b13c-437cd46b5607") + ) + (label "VIN_SW" + (at 252.54 178.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "7b125d49-6128-4d2b-a803-26a8c9bd5ec7") + ) + (label "SYS5V" + (at 119.38 80.01 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7b6c3a10-1862-4db8-9471-fdba513628f2") + ) + (label "GND" + (at 394 115.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7ce3a140-67ff-4e95-bd34-1fb26f045c89") + ) + (label "GND" + (at 305.08 110 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7d80ad73-ae87-436e-b382-3b29d170c3fc") + ) + (label "VEH5V" + (at 238 192.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "7da1d446-f8a1-4e22-a3f0-529c10133391") + ) + (label "EXT_LED" + (at 185.42 101.6 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7ed94c67-c5a4-4a93-908f-e0b0a8bd6552") + ) + (label "CHRG_EN" + (at 272.22 212.46 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "804e27c6-7150-43bd-8528-19f7e4189df0") + ) + (label "SYS5V" + (at 234.92 27.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "80584f2b-8576-47d2-bf94-a20483e69f26") + ) + (label "CHRG_STAT" + (at 119.38 62.23 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8058a224-7d47-4ed9-88d4-05e0217ad9ba") + ) + (label "FB_FAN" + (at 119.38 231.14 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "815e6e77-7b45-4340-b52a-5887fa498e93") + ) + (label "FAN_PWM" + (at 99.06 64.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "818aaeb6-7779-4eec-ab0c-6d6f87454b59") + ) + (label "DIN_4G" + (at 375.08 192.62 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "82b220d6-f010-435f-bde0-7830201fcab6") + ) + (label "VEH5V" + (at 307.78 197.22 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "83668c28-1d8f-4486-8439-9c19bc74fd12") + ) + (label "COMP3_C" + (at 348 143.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "842cd085-715f-4890-ab35-a45e3d4f16ac") + ) + (label "GND" + (at 336 181.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "844bbcc1-d925-4b8d-86fe-e20678c60c74") + ) + (label "SW_5V" + (at 217.17 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "863b1389-f450-4d33-9660-c0502f2ec834") + ) + (label "BASE_LS" + (at 148.59 106.68 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8654876d-2e3d-42d1-ba6b-615c6ffd8863") + ) + (label "COMP3" + (at 348 136.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "86a9f204-aaac-4065-8350-84d672bea524") + ) + (label "MAIN5V" + (at 252.54 193.62 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8717e460-bdc0-4a7e-a5b1-7a6fe4a17aa1") + ) + (label "CHRG_EN" + (at 119.38 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "88098fbb-e819-41cb-83ee-080090cbadc0") + ) + (label "EXT_LED" + (at 266.7 104.14 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "88ebeadf-b496-4f91-b28e-ed3719030cbc") + ) + (label "5V_FAN" + (at 232.41 147.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "89647de6-f2f0-411b-b894-752739ef2b22") + ) + (label "PFI" + (at 228 213.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8a092d15-200b-4e78-92b3-047a46a315c9") + ) + (label "VEH5V" + (at 67.31 17.78 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8a6c40e7-ee6f-4cf7-831d-a2ddaa114f16") + ) + (label "CLPROG_TP" + (at 306 252 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8a7edb7c-84ee-4b6f-b73f-5757743a70c4") + ) + (label "Q6_BASE" + (at 362.92 210 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8af2401b-5258-4c82-808a-56917ce84d57") + ) + (label "MAIN5V" + (at 344 192.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8bc9046d-aca4-4462-aa73-85cc34d92366") + ) + (label "GND" + (at 322 211.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8c475cba-4f62-472c-b2c3-ee6fdbd7fd76") + ) + (label "SYS5V" + (at 364.92 177.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8cff29f0-6005-4e5d-85fc-a0635960f39e") + ) + (label "GATE_LS" + (at 209.55 80.01 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8d592084-6394-4d89-8d9c-b21b377c48f3") + ) + (label "BLED1" + (at 318.81 32 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8e8e8868-2f83-4752-afda-9736eebbda7a") + ) + (label "EN_FAN" + (at 119.38 226.06 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8ec516b8-5ad4-448c-8a7f-628b6ea685fe") + ) + (label "5V_SENSE" + (at 99.06 59.69 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8f1d9d24-c6c0-4f82-bf40-710c85f5bbfa") + ) + (label "FREQ3" + (at 344 128.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8fd49347-d4c7-4d6d-9bce-b8fd3ffea8d1") + ) + (label "GND" + (at 445.08 110 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9094ce7b-afae-4136-836a-916245fef7ab") + ) + (label "MODEM_RST" + (at 396.92 40 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "90a9825f-e34c-4fd4-b97e-fa9a7e1b363a") + ) + (label "VIN_SW" + (at 255.08 178.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9101518e-dd1f-4c72-b376-c73b7e97ac03") + ) + (label "3V3_MODEM" + (at 386 124.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "92b3a7f1-23d5-4ce6-a137-9f6ae73e4cc8") + ) + (label "GND" + (at 95.25 194.31 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "93434d73-8817-4f89-83ae-04695e076415") + ) + (label "FREQ3" + (at 352.38 120 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "948da77c-5ac7-4d9e-b796-4ea8f8154cac") + ) + (label "EN_FAN" + (at 101.6 219.71 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "953de89d-bee9-45bd-a93f-58de4b9d8da9") + ) + (label "GND" + (at 97.79 158.75 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "95f8b3aa-b9f3-48ab-bf10-bfab28e56dbc") + ) + (label "USB_CC1" + (at 470 51.19 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "97a92520-b38a-4e2b-bb13-2f0b66ce7090") + ) + (label "SW_5V" + (at 264.16 139.7 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "99c645fd-b2d8-4b20-a7c1-e7a4dee0c101") + ) + (label "VIN_SW" + (at 251.81 172 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "99fc5515-7a72-4726-be6b-9f8069b97e1e") + ) + (label "EXT_LED" + (at 99.06 69.85 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9b5fe168-5e98-4138-b2ae-c6c6e8daaa68") + ) + (label "NTC" + (at 272.22 209.92 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9be439bf-585d-4855-819b-82ea03909f35") + ) + (label "MAIN5V" + (at 334 204.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9c367004-a798-4fae-a8ab-caee22b9e075") + ) + (label "GND" + (at 440 92.86 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9c947d02-3587-4406-bc5a-4c8e3b74182e") + ) + (label "GND" + (at 311.19 32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9ce89499-5cd3-44d4-80d5-fafe1ea89329") + ) + (label "COMP_FAN" + (at 88.9 212.09 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9d3ed70e-3110-4d06-8d22-e489ab49f27c") + ) + (label "FB3" + (at 352.38 122.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9dd9edeb-19ff-43fd-85fc-529de41d6556") + ) + (label "F1_SEL" + (at 272.22 220.08 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9e489169-8ac0-4afa-bd81-c872974fb764") + ) + (label "F0_SEL" + (at 268 255.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9ef2a5b9-968a-4643-8ea3-79a953109c4c") + ) + (label "BLED4" + (at 318.81 86 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9f66af7a-da70-423e-ad2a-b5d6503059f7") + ) + (label "MODEM_RST" + (at 434.92 110 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9fa60404-c8ce-4e84-94ee-49aced5b2d67") + ) + (label "GND" + (at 377.24 54.92 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a08fd36e-a44f-40df-bc38-198cbe15ca8d") + ) + (label "BST_FAN" + (at 134.62 223.52 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a0ca0b37-82ef-4351-96d9-8078dc1eba6d") + ) + (label "FAN_TACH_RAW" + (at 179.07 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a10eae59-0abe-42c4-b625-09eeec6af78a") + ) + (label "3V3" + (at 120.65 85.09 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a1724d4f-b5f5-4ead-9cf6-63ad2c55701f") + ) + (label "GND" + (at 232.41 152.4 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a1d5d82c-ee57-4023-81c5-79099821f6d7") + ) + (label "GND" + (at 96.52 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a404377f-d45a-40f4-9367-da91b866738d") + ) + (label "BAT_PLUS" + (at 30.48 15.24 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a4687991-9faf-4d38-ac15-ee2939bad2a9") + ) + (label "VIN_SW" + (at 250 178.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a532b2c1-f1f8-41c0-a9a1-3b50f4349ba5") + ) + (label "FB3" + (at 386 131.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a599a86c-7bfe-4cdb-805a-47c274539ecf") + ) + (label "MAIN5V" + (at 322 192.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a615da01-43dd-423b-ad2f-24ba998ed305") + ) + (label "GND" + (at 311.19 68 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a7431973-42f6-4c4f-bbe3-56da39d0bd2e") + ) + (label "USB_VBUS" + (at 455.24 54.76 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a8c36b3c-279e-4773-b803-5e66ab941e30") + ) + (label "USB_CC2" + (at 470 64.19 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a8cd6d2b-181a-4f91-bd36-a4db9c6ef8e5") + ) + (label "BATLED2" + (at 119.38 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a9088140-7ea6-4094-8482-288edd18b574") + ) + (label "BAT_SENSE" + (at 99.06 49.53 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a97e84cd-482e-42cc-9939-cd43c1ab16f7") + ) + (label "FAN_GATE" + (at 204.47 157.48 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "aa5bf77b-ada2-4878-8e77-354c71480e83") + ) + (label "USART1_TX" + (at 120.65 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ab7c1371-b11a-4347-9be2-62443c929726") + ) + (label "SW_BAT" + (at 307.78 212.46 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ac71bdd2-7f57-41fd-9a16-738e51792c47") + ) + (label "GND" + (at 264.16 142.24 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "acc562fc-9d16-40c6-bc67-88cfea78d48e") + ) + (label "GND" + (at 153.67 134.62 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "acc7895c-278f-4d2b-a13b-214c21410162") + ) + (label "I2C_SCL" + (at 152.4 193.04 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "adf2fc9a-f2f6-4e4b-b225-6f730a59e4e4") + ) + (label "GND" + (at 440 92.86 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b111a7aa-775b-40cd-aa94-d7eff68955e7") + ) + (label "MAIN5V" + (at 250 193.62 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b36f6523-4d02-4649-9c4c-6339c9c6243d") + ) + (label "BST3" + (at 348 104.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b44aeb14-94c0-4bf7-868b-4566a9b4e9d2") + ) + (label "I2C_SDA" + (at 120.65 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b4f48aae-2b6b-486d-ad27-ea5457ca11d7") + ) + (label "GND" + (at 392.92 180.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b6d5cf83-693d-4161-9932-1dc2edc1902c") + ) + (label "VEH5V" + (at 30.48 95.25 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b7a59cd9-e55d-4889-8eff-c609e423ae85") + ) + (label "GNSS_RX" + (at 264.16 147.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b8308930-754f-42cf-be40-52e2c47d1b74") + ) + (label "NRST" + (at 294.92 110 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b9436908-9204-4b15-bc79-cc04eb489f81") + ) + (label "3V3" + (at 30.48 139.7 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b9d68875-0c47-40bd-8a1c-de116a0d4ab9") + ) + (label "GND" + (at 377.24 52.38 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b9dc3f6d-d424-4835-a27a-752bc73319da") + ) + (label "GND" + (at 127 238.76 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ba6faa05-15ae-4824-bf0e-2a4ed37665c5") + ) + (label "GND" + (at 470 71.81 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ba8bb96b-ef1f-4348-be6c-81093bcfbf3a") + ) + (label "SYS5V" + (at 380.19 198 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "bb229e79-925b-42c2-94c6-4956d02541f0") + ) + (label "GND" + (at 354 225.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "bbd33631-af80-4552-8dd3-2e8eb3ba1679") + ) + (label "SYS5V" + (at 100.33 85.09 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "bdc2d3d5-de24-409d-b920-1ddec1c896c2") + ) + (label "USB_DM" + (at 455.24 70 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "bec41ed9-501b-48c8-9010-e94389497c4c") + ) + (label "GND" + (at 379.81 124 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c019cf32-f5aa-441d-b239-06afee7731fd") + ) + (label "3V3" + (at 294 248.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c0bf8d82-af45-4eff-b3e6-4feffbff455e") + ) + (label "24V_IN" + (at 86.36 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c0ff9f67-861c-41bb-829d-ae3860a9ca95") + ) + (label "5V_FAN" + (at 185.42 228.6 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c31dea4e-0b51-4aaf-aac2-83dfbbd6f3b8") + ) + (label "BLED3" + (at 318.81 68 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c3737010-50e8-48c1-a575-d82d05679467") + ) + (label "BLED3" + (at 300 71.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c38c09ec-8c62-4e48-b6e3-9a00974452c3") + ) + (label "GND" + (at 262.89 129.54 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c3ee8570-80e2-4c2c-a891-7605e115f4c8") + ) + (label "SW_5V" + (at 352.38 117.46 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c412f0f6-00e3-4f67-b8bd-142ab69d8566") + ) + (label "MODEM_LED_A" + (at 493.81 100 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c4f7a2d2-f6b0-4913-8712-f01f4c4a5782") + ) + (label "DOUT_4G" + (at 396.92 32.38 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c4fa5fc1-6865-4540-ae25-1687e282543d") + ) + (label "GND" + (at 156.21 114.3 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c5ed3f91-8201-4b4b-a79e-a8fb92ae7ecd") + ) + (label "FREQ_FAN" + (at 119.38 228.6 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c78d28bf-a7ed-41b1-9c82-bdebbe7c6588") + ) + (label "I2C_SDA" + (at 31.75 165.1 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c7a04694-cf06-41cb-b45f-ff20f55d5a2f") + ) + (label "BATLED3" + (at 300 64.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c9cfb60b-a52f-443c-86c7-eb4847996a6b") + ) + (label "BATLED4" + (at 119.38 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cad462f2-8dd0-4b59-9578-e94238f0ed94") + ) + (label "GND" + (at 111.76 133.35 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "cb58a09b-fa03-497d-8923-6d281b28996b") + ) + (label "FREQ_FAN" + (at 88.9 237.49 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ce331318-fb82-4ae3-8960-d6aff6472cc5") + ) + (label "GND" + (at 396.92 77.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cf07d2a8-5f90-4f6c-851d-ea23c4792b47") + ) + (label "PWR_CTRL" + (at 161.29 71.12 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d038a487-18e7-445f-afad-6237eeae9c75") + ) + (label "IGN_SENSE" + (at 99.06 62.23 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d06a8d91-b151-40b9-b892-765b90e84413") + ) + (label "3V3" + (at 360 236.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d0956dc3-6459-46eb-a37a-0b82ed26c83b") + ) + (label "VIN_SW" + (at 247.46 178.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d0ab7b91-37d9-45d0-88e3-0a05b3efd509") + ) + (label "24V" + (at 77.47 100.33 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d259386a-57c7-40d7-b690-98d351d65e6a") + ) + (label "CHRG_EN" + (at 252 218.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d3586297-a2e3-44d9-8a86-b038c364091c") + ) + (label "GND" + (at 370.54 215.08 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d388862b-7c1c-4baa-b2fd-dc75f276d717") + ) + (label "I2C_SCL" + (at 120.65 69.85 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d59803c4-7bd6-4aac-b99d-6ba6a34d054b") + ) + (label "GND" + (at 88.9 232.41 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d713d6d3-9083-48e2-816f-f43fd3404b15") + ) + (label "USB_DP" + (at 396.92 45.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d724b42a-0e62-4f75-9092-8e70ef5205f8") + ) + (label "VEH5V" + (at 328 252 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d831dbd7-431e-4831-8dae-65f43c6d1543") + ) + (label "FB_FAN" + (at 177.8 226.06 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d921ea8f-b8f4-47e6-bf1a-49a1cbe0d94d") + ) + (label "USB_CC2" + (at 455.24 62.38 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d9592120-ac1f-4cae-bda9-7c4f22c0ebcf") + ) + (label "FREQ_FAN" + (at 119.38 228.6 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d98f9c03-342c-44dd-9ce6-b217c9046dd4") + ) + (label "SW_FAN" + (at 139.7 219.71 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d9ff3a4b-fbaa-4521-989a-4a3829dee85c") + ) + (label "3V3" + (at 50.8 76.2 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "db3fc8b6-339e-4528-8176-7889eb1d6fe7") + ) + (label "GND" + (at 99.06 82.55 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "dc006fb4-5606-4bd7-9e24-42bab9cf7459") + ) + (label "GND" + (at 352 151.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "dc57f58d-e7cd-4c95-b541-118821712d58") + ) + (label "BAT_SENSE" + (at 25.4 44.45 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "dc7fb61c-325b-4ebe-a2a4-6012b7962668") + ) + (label "NTC_TEMP" + (at 360 243.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "dd37bcc5-2223-4c52-8eb0-d9b1d5142c89") + ) + (label "GND" + (at 63.5 157.48 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "dedd1a47-1ffc-4b72-9483-473681b854cc") + ) + (label "PFO_TP" + (at 316 252 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "df237a60-d2a8-4eed-9a23-8c50dce9d75d") + ) + (label "GND" + (at 238 199.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e0262368-a0f3-4c23-b13f-427d89096bea") + ) + (label "SW3_NODE" + (at 367.62 117.46 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e0475450-424d-4905-b628-4a8bc60258ab") + ) + (label "LED_A" + (at 177.8 83.82 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e1545961-4552-4c3d-93e5-3a54a4ea23dd") + ) + (label "BYP_CTRL" + (at 119.38 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e1b5314e-d8a9-4ff1-85b9-1d6aa1a2d15c") + ) + (label "GND" + (at 127 238.76 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e1b794fd-9fc9-40bf-adc6-717fa85335c2") + ) + (label "MAIN5V" + (at 307.78 204.84 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e3ae8c48-703f-4a61-921e-de2ab65e5363") + ) + (label "SW3_NODE" + (at 348 111.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e461ba17-29d2-49a0-8637-5df3c872d051") + ) + (label "COMP3" + (at 352.38 125.08 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e480ae22-3bf4-42a4-a4d1-b7f5557d4cc4") + ) + (label "BST_FAN" + (at 134.62 223.52 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e4e9cee0-afed-447c-8abf-a8690a3a388c") + ) + (label "GND" + (at 224.79 100.33 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e50149c2-2635-4a54-8035-7061241e24a8") + ) + (label "I2C_SCL" + (at 30.48 149.86 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e51f6442-9e79-4a54-9c27-2cfb93685c19") + ) + (label "NRST" + (at 100.33 46.99 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e8252ab0-4221-42b0-b356-7e61e73d2a62") + ) + (label "24V" + (at 101.6 224.79 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e909b2b8-3089-46c9-b256-a0aeb9082473") + ) + (label "GND" + (at 114.3 194.31 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e9de4387-b28b-4938-84dc-d8b66ab6d6c8") + ) + (label "BATLED4" + (at 300 82.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ea33067c-173f-44c7-aec7-910a98c5e597") + ) + (label "MODEM_LED_A" + (at 470 103.81 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ebf716dd-6359-47a1-ac1a-cc2cf02b345f") + ) + (label "VIN_SW" + (at 307.78 199.76 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ed8de2a8-ceec-4897-b3d7-bd57cf7a5698") + ) + (label "GND" + (at 334 211.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "edf9be32-6729-43f5-a877-7d7e72ba55eb") + ) + (label "SYS5V" + (at 180.34 59.69 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ef014c57-513d-403b-9649-64049e7662a5") + ) + (label "NTC_TEMP" + (at 100.33 72.39 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ef09d502-8674-4fc8-b140-e5091f9bf8a2") + ) + (label "VFB_BST" + (at 272.22 199.76 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ef98bbcd-22be-4373-a683-941db4e28c75") + ) + (label "PROG" + (at 240 218.19 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "effd5bb6-f2b4-4159-bc90-4c727e325307") + ) + (label "USART1_RX" + (at 346.76 47.3 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f01e0b6f-bd31-4d4e-940e-82c909aae2e8") + ) + (label "USB_DM" + (at 455.24 67.46 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f0deb5d6-61e8-49aa-b71d-54b729fd27f3") + ) + (label "USB_DP" + (at 455.24 75.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f120fe25-1a98-4cbb-b9d8-ed41fa26295e") + ) + (label "GND" + (at 432.38 92.86 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f1ce043d-8eb1-4b91-bfc3-3bdbf3478ad4") + ) + (label "3V3" + (at 95.25 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f2616165-80d4-43c5-9f3b-15f4a1e474ca") + ) + (label "PFO_TP" + (at 272.22 230.24 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f35b8760-98fd-4cfb-ac83-07e69afef331") + ) + (label "LED_K" + (at 264.16 35.56 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f3fce9bf-c840-446b-948d-88d9cf647954") + ) + (label "GND" + (at 76.2 140.97 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f5bc25d1-9e26-405b-9a48-aaa0c5c2ab17") + ) + (label "3V3" + (at 82.55 173.99 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f6a615c6-844b-4453-9eed-fb3f9e903bb0") + ) + (label "GND" + (at 228 225.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f6a7b0a1-8418-425f-b565-46b680e03da7") + ) + (label "24V_IN" + (at 134.62 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f7be1421-fea6-4cbf-8816-75efbf2110a6") + ) + (label "GND" + (at 486.19 100 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f8c36290-c2af-4f8d-839b-c3077d63c2f6") + ) + (label "CHRG_FAULT" + (at 272.22 227.7 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f8d46d74-41a2-45dc-a813-421407ad5564") + ) + (label "VFB_BST" + (at 272.22 202.3 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f9c5cc03-beab-4f56-a1bd-7bed19eeee07") + ) + (label "USART1_TX" + (at 377.62 177.38 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f9ea5a0b-9022-459d-b694-9ae5d93e7e1b") + ) + (label "CC_FAN" + (at 88.9 219.71 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fac4daea-7f3b-49f4-9814-b5423af0b7f1") + ) + (label "24V" + (at 149.86 20.32 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "fc4c61e9-8c9f-4486-a87d-51dc0f071e08") + ) + (label "USART1_RX" + (at 120.65 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fc8a3e3d-429e-43ca-9564-236fe1304818") + ) + (label "GND" + (at 348 159.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fd7eb742-4f74-45a4-9942-3c820be4eadd") + ) + (label "MODEM_LED" + (at 470 96.19 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fdce13f9-46e1-4e48-9421-08953a1b3d1e") + ) + (label "BASE_LS" + (at 161.29 82.55 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ffb3a170-9afb-4c6d-9497-9d8f05dffcd8") + ) + (label "SW_IN" + (at 161.29 63.5 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ffbe28ea-b449-482b-97a6-5a989cd444ad") + ) + (symbol + (lib_id "Connector_Generic:Conn_01x05") + (at 55.88 22.86 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "0108bbc7-5b9d-4e76-a0d0-204d5f7f6d42") + (property "Reference" "P1" + (at 55.88 14.986 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GX16-5" + (at 55.88 30.226 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal" + (at 55.88 22.86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 55.88 22.86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 55.88 22.86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "16efdaea-262a-4465-8dcb-48de04d8f250") + ) + (pin "2" + (uuid "d42620e5-0154-4a8f-991e-b542c6e3b2a1") + ) + (pin "3" + (uuid "1a4d7f04-b825-41ec-a85c-fab750bdd625") + ) + (pin "4" + (uuid "f2fe876a-4941-4fc0-b69d-fabc21a47bd8") + ) + (pin "5" + (uuid "366dc5b6-ee83-41c3-b293-2006e1bf3936") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Sensor_Temperature:TMP102xxDRL") + (at 107.95 156.21 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "01a2809c-e224-4789-8453-a52a956eb63a") + (property "Reference" "U4" + (at 107.95 143.51 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "TMP102" + (at 107.95 142.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-563" + (at 109.3 147.36 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "https://www.ti.com/lit/ds/symlink/tmp102.pdf" + (at 109.3 144.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Digital Temperature Sensor, ±3°C, low-Power, SMBus, 12 bit, Two-Wire Serial Interface, SOT-563" + (at 108.03 156.25 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "cc5911cc-84cb-494c-b2bc-ed67b0de7856") + ) + (pin "2" + (uuid "54d57a0c-09dd-4840-833f-83cd65d3ae4e") + ) + (pin "3" + (uuid "9284a6df-2e57-4d2d-84d5-7c007343116d") + ) + (pin "4" + (uuid "0d8bd602-293b-48dd-8dd5-e61b89fedc32") + ) + (pin "5" + (uuid "9506eee4-800b-4032-8940-28cc7b95d4a1") + ) + (pin "6" + (uuid "4e76e10e-2d0c-43b3-8055-703091199cdf") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "U4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x02") + (at 240 25 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "02b1c28b-6581-4f24-a2d8-388a336ccaa8") + (property "Reference" "P11" + (at 240.03 22.86 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "CUTOFF-SW" + (at 240.03 27.94 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (at 240 25 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 240 25 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 240 25 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "88444aea-4e27-4591-9a72-b46c33e9f5b3") + ) + (pin "2" + (uuid "e06f2f38-66c1-45d3-8db3-96fe290d65c8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P11") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 128.27 128.27 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "032bb60c-39d3-410d-b1a3-b6c34ea80865") + (property "Reference" "C10" + (at 132.08 128.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF/50V" + (at 132.588 130.302 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_6.3x7.7" + (at 129.235 124.46 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 128.27 128.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 128.27 128.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "1331d8a5-8b66-4bfb-94c7-f75ccae12763") + ) + (pin "2" + (uuid "1c13cba4-4172-41c1-bdda-8c9098cfbf50") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 490 100 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "044bbf0d-ccd0-4a2c-9cc6-bb3e0690b5e3") + (property "Reference" "D4G" + (at 490 102.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 490 97.46 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0805_2012Metric" + (at 490 100 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 490 100 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 490 100 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "434cafa6-f20e-441b-8711-2b7b2c5f1d45") + ) + (pin "2" + (uuid "a4978ea2-f41a-4df9-b154-c22041891502") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "D4G") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 177.8 238 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "04642c30-c969-4c1c-88c9-a65a8dc698f5") + (property "Reference" "R21" + (at 177.8 234.95 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "19.1k" + (at 177.8 240.03 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 176.022 238 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 177.8 238 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 177.8 238 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b7344aab-5551-473e-9bab-535c952c02c8") + ) + (pin "2" + (uuid "a096f119-d3a7-458d-89e3-b8181d6e9095") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R21") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 315 32 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "075694af-1550-45ec-bd39-b01d921a3e89") + (property "Reference" "DB1" + (at 314.96 29.21 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 314.96 34.29 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0805_2012Metric" + (at 315 32 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 315 32 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 315 32 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "dd80ef61-5051-4679-9ab1-49056034bb6d") + ) + (pin "2" + (uuid "8d04fea8-c4ab-4d00-86d2-5a81cd34d9d2") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "DB1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 328 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "07b55d37-4d32-467c-9949-6cfa50503c5d") + (property "Reference" "PF8" + (at 327.66 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 327.66 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 328 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 328 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 328 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "e7e4eb54-c4e3-47fb-9bdb-d42486c4059c") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Jumper:SolderJumper_3_Bridged12") + (at 240 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "0a50686b-a5ef-4002-9672-2f7df90f8d4e") + (property "Reference" "JP2" + (at 240.03 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "F2:Li-ion" + (at 240.03 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (at 240 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 240 236.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 240 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "5a81d72c-4d5f-4229-b43f-a4f56bb20392") + ) + (pin "2" + (uuid "1df6e51e-c576-472f-843d-6e06ceb70b2b") + ) + (pin "3" + (uuid "c17993d8-3236-4819-b529-fddcdfc8a23b") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "JP2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Switch:SW_Push") + (at 300 110 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "0cf79638-84d8-4469-95d8-2d92bcbca615") + (property "Reference" "SW1" + (at 299.72 107.95 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "RESET" + (at 299.72 113.03 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Button_Switch_THT:SW_PUSH_6mm" + (at 300 115.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 300 115.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 300 110 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "463c3562-4acc-4333-8702-d7bd615a3f54") + ) + (pin "2" + (uuid "20b651dd-7aa3-47e1-a690-178e6eec645e") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "SW1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 300 32 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "0f1ec93e-fae5-4fbf-af4f-341677378909") + (property "Reference" "RB1" + (at 297.18 31.75 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "330R" + (at 302.26 31.75 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 298.222 32 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 300 32 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 300 32 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "a67764d2-8470-48d0-a515-d7bcb14157c8") + ) + (pin "2" + (uuid "4f00abe5-00e8-4dff-afed-e0e044dd3e26") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "RB1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 360 240 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "131ec47b-3806-4b39-bf9d-4a4b0e45a839") + (property "Reference" "R42" + (at 359.41 237.49 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k/1%" + (at 359.41 242.57 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 358.222 240 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 360 240 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 360 240 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "2f7b5fe4-2cb3-406c-abeb-59742f8cd270") + ) + (pin "2" + (uuid "6c21cbca-b58a-4904-9326-e24fb068028e") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R42") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 237.49 149.86 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "13db1034-2695-4354-8bff-fa449b25171e") + (property "Reference" "P6" + (at 237.49 144.78 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "FAN" + (at 237.49 143.51 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 238 150 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 238 150 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 238 150 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "9fdee6d4-8b19-49c6-b28f-7883c4ea50d7") + ) + (pin "2" + (uuid "dcf38381-ad5f-4cd3-a6c4-ebd56169f350") + ) + (pin "3" + (uuid "3372d350-d215-41e3-a18d-e720b82e5507") + ) + (pin "4" + (uuid "79eca317-fb03-4fca-8657-260cb52ef2df") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 218.44 139.7 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "1446dacc-e01f-4b8c-8452-53846218445b") + (property "Reference" "D2" + (at 218.44 135.89 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SS34" + (at 218.44 134.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMA" + (at 218 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 218 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Schottky diode" + (at 218 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "3d78d71e-31ca-47e5-8410-5cedcc4b9e1e") + ) + (pin "1" + (uuid "87a404bf-a0ac-44e9-9095-36faf5d58bb2") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "D2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 30.48 54.61 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "14555c01-8a02-4bbb-8897-e31c90351c2c") + (property "Reference" "#PWR01" + (at 23.114 54.356 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 30.48 50.8 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 30.48 54.61 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 30.48 54.61 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 30.48 54.61 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "7ed5821a-3db3-4580-9450-c785f04167c1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "#PWR01") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 160.02 149.86 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "1553e962-8b29-4a74-8e84-005da9055acf") + (property "Reference" "Rtp" + (at 163.83 149.86 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 163.83 151.13 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 158.222 150 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 160 150 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 160 150 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "699b8824-12d4-439e-9c7e-afc3a49d1d28") + ) + (pin "1" + (uuid "42f6b694-1c91-46b3-bcea-1722bb7c8ae1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rtp") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x02") + (at 384 240 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "16013d26-cb77-4d7a-8d37-3c93c50cf8ca") + (property "Reference" "P12" + (at 383.54 237.49 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "NTC-HOTSPOT" + (at 383.54 242.57 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (at 384 240 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 384 240 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 384 240 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "71a4a718-e139-4c7c-ac5e-4b82cf4484e0") + ) + (pin "2" + (uuid "e2eb6bd5-ee9d-4fcd-bde7-9a317d39f3d1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P12") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Drogheda-sym:LTC4040EUFD") + (at 290 215 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "16aae149-871a-4c14-938f-9da627a3251c") + (property "Reference" "U6" + (at 289.56 212.09 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LTC4040EUFD" + (at 289.56 217.17 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_DFN_QFN:QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm" + (at 290 209.92 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 290 207.38 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 290 215 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "24" + (uuid "3c795e60-5f39-4a1b-b051-7c89f8904afb") + ) + (pin "25" + (uuid "84d62dcb-e902-4297-8396-8838d4ad97b3") + ) + (pin "1" + (uuid "d23c17c6-d82d-4f1e-9dbd-166d60581d9a") + ) + (pin "2" + (uuid "c2edcf7d-f501-4cbe-8ccb-3730ad376387") + ) + (pin "3" + (uuid "9c6d0493-b1dd-4bfd-bdfd-4804efa399dd") + ) + (pin "4" + (uuid "3bab013b-6c32-41c0-8e7d-49e3106bd01d") + ) + (pin "5" + (uuid "327c5e79-5798-41fe-95cd-18e226d0e26f") + ) + (pin "6" + (uuid "8e1ff95f-7e83-4c15-bdcf-bb2a5d116d7a") + ) + (pin "7" + (uuid "21110ee7-9a94-4299-bbbf-c1734ba1ff46") + ) + (pin "8" + (uuid "02fb982b-4ecf-4105-bb7c-2ec98e8a5543") + ) + (pin "9" + (uuid "aa90feba-18e5-4079-9f6f-6e15edc4149f") + ) + (pin "10" + (uuid "cc61e9cc-f848-4a2a-bc0e-7fffc20c72ee") + ) + (pin "11" + (uuid "c30ce4d9-d0de-4075-826b-b34a45299af9") + ) + (pin "12" + (uuid "f57053c5-ce92-4425-b52f-f326dbd233c6") + ) + (pin "13" + (uuid "a3f1e124-b8e6-400d-abc9-4d20c6abc523") + ) + (pin "14" + (uuid "f00692fc-178a-4bf5-a0a4-5fa98c71ce4b") + ) + (pin "15" + (uuid "4ce347d2-3ea1-4803-8893-bccd77c7675a") + ) + (pin "16" + (uuid "e909c03e-f22c-4713-8181-433dc2319672") + ) + (pin "17" + (uuid "a630d8b7-d4b3-4df1-89d2-64b084cca515") + ) + (pin "18" + (uuid "7b4e59dc-60f8-4a52-804d-5a154d22a1e2") + ) + (pin "19" + (uuid "ed540178-6643-439d-a281-b77be0dd3542") + ) + (pin "20" + (uuid "86b5bd48-e9cf-4f01-80d1-a680341ded8f") + ) + (pin "21" + (uuid "ef7797b7-994d-4660-b8cf-642b42f6a5b8") + ) + (pin "22" + (uuid "ae37e135-4814-406f-9899-97f33c8d796f") + ) + (pin "23" + (uuid "8fc0f6e6-c0a8-4cfc-9d41-00d9e806f689") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "U6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 300 68 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "17f6a5cf-6d8e-402e-9967-b8a036caf780") + (property "Reference" "RB3" + (at 299.72 66.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "330R" + (at 299.72 71.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 298.222 68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 300 68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 300 68 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "f24ac1c9-d558-4165-949f-6c8fc56b6e0c") + ) + (pin "2" + (uuid "acbfe695-9a89-47fd-bec0-50ba777e75d1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "RB3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:L") + (at 376 112 90) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "18e5d833-2591-464b-8ee3-fdf6d0f722a9") + (property "Reference" "L7" + (at 375.92 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uH/2A" + (at 375.92 114.3 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (at 376 112 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 376 112 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 376 112 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "c5805126-b900-48d4-b2d7-81f16f5d4378") + ) + (pin "2" + (uuid "c95aa8fd-c997-4792-9fb0-a97901077948") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "L7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Drogheda-sym:MP1584EN") + (at 127 228.6 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "18efa277-37f2-4004-b275-ae98e7a847f7") + (property "Reference" "U2" + (at 129.54 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MP1584EN" + (at 127 226.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (at 127 223.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 127 220.98 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 127 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "5" + (uuid "cd0137d1-d96e-4bf3-8ce7-7d8685d3772e") + ) + (pin "7" + (uuid "58f49308-5684-46c1-b30f-8b8e6bd53878") + ) + (pin "4" + (uuid "a69adc01-b19b-4538-8af7-8648790c102c") + ) + (pin "8" + (uuid "01956122-4b1b-4b57-a437-5d599394a22e") + ) + (pin "6" + (uuid "dc4870c2-2fce-4680-bc07-9d1153ddc960") + ) + (pin "1" + (uuid "4b1f616b-f750-4a50-83d2-8407ec5e528b") + ) + (pin "2" + (uuid "172d4498-a3e5-431e-b67c-0114f60ef538") + ) + (pin "3" + (uuid "8c46bcc5-4278-4b4a-adb2-c3def0608019") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "U2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 348 140 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "2203d370-f0cc-42ae-b42b-28ad8770a675") + (property "Reference" "Rcomp2" + (at 347.98 137.16 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "40.2k" + (at 347.98 142.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 346.222 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 348 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 348 140 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "18477c60-fd34-4089-98aa-e9c320008196") + ) + (pin "2" + (uuid "2a64ce09-6c24-446e-b9fb-b4c3f2b63318") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rcomp2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 386 128 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "244f1564-b8d4-45fc-b36d-55bf4e2c2aba") + (property "Reference" "R60" + (at 386.08 125.73 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k/1%" + (at 386.08 130.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 384.222 128 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 386 128 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 386 128 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "a5d07275-47df-42a1-aa71-e32c782cba95") + ) + (pin "2" + (uuid "0f5f814e-068c-4c65-a147-57acd6f12dc5") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R60") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 96.52 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "2484bb1d-96e8-497c-a824-6524c72721e1") + (property "Reference" "PF1" + (at 96.52 15.748 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 96.52 20.066 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 96.3 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 96.3 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 96.3 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "4285b2d3-c574-445a-ae5f-381bad44f452") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 30.48 99.06 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "2555dc13-0a4b-40c0-a5d5-394402530817") + (property "Reference" "R7" + (at 27.94 99.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 33.782 99.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 28.702 99.06 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 30.48 99.06 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 30.48 99.06 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "06d05ec6-4008-48a7-9ea5-d5e3bbfd9220") + ) + (pin "2" + (uuid "b1b2a1cb-dc0d-4cba-b4a8-16883417ca5d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 224.79 95.25 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "26539809-7cfd-4de1-8c82-d80d68723457") + (property "Reference" "C3" + (at 219.202 95.25 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF" + (at 227.584 95.25 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_6.3x7.7" + (at 225.965 91.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 225 95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 225 95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b5e34d16-0544-49ff-8d18-231192e31312") + ) + (pin "2" + (uuid "9a36d3a5-30dd-4d4f-a621-dcaa614acbea") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 165.1 228.6 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "267d7d8a-6cef-4b23-a846-aee05a175862") + (property "Reference" "C23" + (at 165.1 226.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "22uF/16V" + (at 165.1 231.14 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 166.065 224.79 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 165.1 228.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 165.1 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "c1b79297-1f7d-49e5-a9e6-c4909a3c696e") + ) + (pin "2" + (uuid "c1fde159-1d04-4e91-905f-c28892d535f9") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C23") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 352 148 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "27e8f6d1-b547-43cf-8394-0eab30919dea") + (property "Reference" "Ccomp2" + (at 351.79 146.05 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2nF" + (at 351.79 151.13 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 352.965 144.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 352 148 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 352 148 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "56046cee-8555-4039-afe4-d07758006acd") + ) + (pin "2" + (uuid "888c6487-d65f-4e93-ac53-d88000169e4e") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Ccomp2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:TestPoint") + (at 316 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "2f417faa-03ba-4977-8cf6-fb3531d8037e") + (property "Reference" "TP2" + (at 316.23 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PFO" + (at 316.23 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "TestPoint:TestPoint_Pad_D1.5mm" + (at 321.08 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 321.08 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 316 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "5260840b-e5b9-4b27-afaa-7320c3784bef") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "TP2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Sensor_Humidity:SHT4x") + (at 73.66 181.61 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "30ea07c3-9fe8-4631-8864-9f26d2cc3400") + (property "Reference" "U3" + (at 73.66 174.752 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "SHT40-AD1B" + (at 72.644 187.96 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad" + (at 78 175.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf" + (at 78 172.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4" + (at 74.19 181.65 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "32d389f4-11f7-49b3-ae5e-75512d155b2e") + ) + (pin "2" + (uuid "e682da6b-cecf-4532-b719-3643b9d1f81c") + ) + (pin "3" + (uuid "2bdcc34d-1e8d-474d-9b76-dd0a11ac23b4") + ) + (pin "4" + (uuid "1094a3d6-c031-429d-8145-d6aa95bb7e76") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "U3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 101.6 228.6 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "36012a7d-9c67-4909-96f5-e3af11c29e79") + (property "Reference" "C22" + (at 99.06 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "22uF/50V" + (at 104.14 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1210_3225Metric" + (at 102.565 224.79 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 101.6 228.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 101.6 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "c1b8634e-e044-4a5d-b07c-806f2e83057c") + ) + (pin "1" + (uuid "dcab75d8-6f21-411c-afd9-5f7d7fee94fd") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C22") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 315 50 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "36a3bee1-3a58-44f9-b6ff-a552d8955561") + (property "Reference" "DB2" + (at 314.96 46.99 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 314.96 52.07 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0805_2012Metric" + (at 315 50 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 315 50 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 315 50 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "8055311a-62d4-4833-8a77-cb2f53591cd8") + ) + (pin "2" + (uuid "e2b8ebcc-56e8-4c93-8b74-2955ca8430ac") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "DB2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 228 196 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "389ffbbb-c267-48d2-9dbe-7e9224e9dd56") + (property "Reference" "C30" + (at 228.6 193.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "10uF" + (at 228.6 198.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 228.965 192.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 228 196 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 228 196 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b4d9afbf-52c5-4bf2-82b8-9c37e6377bd2") + ) + (pin "2" + (uuid "73f30d96-5605-408f-beb9-9cd53184bc84") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C30") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 336 178 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "3972637f-d7d0-486a-ac40-5d46679e1920") + (property "Reference" "C35" + (at 336.55 175.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "22uF" + (at 336.55 180.34 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 336.965 174.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 336 178 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 336 178 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "e17892ac-979a-40fc-b8b2-bad9a238e978") + ) + (pin "2" + (uuid "4fcd8f0c-b54f-4600-847c-dbf3231716f6") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C35") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 125.73 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "3e6bc231-f148-4a41-a779-cc26771abc66") + (property "Reference" "PF4" + (at 125.73 15.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 125.73 22.098 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 125.51 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 125.51 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 125.51 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "95b92132-7328-4107-b812-e2f9a24f531f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 44.45 76.2 0) + (mirror y) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "40072bf4-acbb-4d2d-b7b7-58c48263c3ca") + (property "Reference" "D5" + (at 44.45 79.248 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BAT54" + (at 44.45 72.898 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-123" + (at 44.14 76.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 44.14 76.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Schottky diode" + (at 44.14 76.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "fdf55921-4aa3-40d2-bc94-3a90701e66c8") + ) + (pin "2" + (uuid "dfeac1f4-e385-47dd-aef2-97c789ca893b") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "D5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 30.48 109.22 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "4318cfbd-8e36-4d4a-ba69-a56aadf25e99") + (property "Reference" "R8" + (at 27.686 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 33.782 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 28.702 109.22 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 30.48 109.22 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 30.48 109.22 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "e2134bf0-3630-4f0b-a83d-8830190c31b8") + ) + (pin "2" + (uuid "e6be58ae-9e7c-4af4-9ac1-d281983a5d7f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 43.18 48.26 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "4454568d-6ad4-4db9-9fd7-af20e889d813") + (property "Reference" "C5" + (at 38.1 48.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 45.974 48.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 44.145 44.45 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 43.18 48.26 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 43.18 48.26 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "756bc646-a40d-4441-b6cb-2ff7254dc44e") + ) + (pin "2" + (uuid "19c05997-8e39-4a72-892c-1e7e1a043f6d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 161.29 76.2 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "44654388-d913-4e26-a9a4-6890b99c09fd") + (property "Reference" "R1" + (at 158.496 76.2 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 164.338 75.946 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 159.172 75.71 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 160.95 75.71 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 160.95 75.71 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "7ccd7cae-5439-40b9-8b51-1eac62b02846") + ) + (pin "2" + (uuid "fe38243c-2db2-42bc-b91c-764c644440bb") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 149.86 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "477f317f-3aed-47b7-be58-ef92dce5b9aa") + (property "Reference" "PF6" + (at 149.86 15.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 135.636 9.652 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 150.08 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 150.08 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 150.08 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "aac6d3dc-7b73-40ec-8206-94e94a11ca6f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 31.75 160.02 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "485654eb-2218-4de8-bd8a-daab7c03e4d7") + (property "Reference" "R31" + (at 27.94 160.02 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "4.7k" + (at 35.306 160.02 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 30.442 159.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 32.22 159.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 32.22 159.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "644ee218-a0d9-47a1-9e1b-ed72961a41a1") + ) + (pin "2" + (uuid "0b836478-381e-473b-9586-e8832193dca9") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R31") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 315 86 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "4b34adbb-9cd4-4540-91a6-c073c1367e91") + (property "Reference" "DB4" + (at 314.96 83.82 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 314.96 88.9 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0805_2012Metric" + (at 315 86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 315 86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 315 86 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "f828fd67-e3d2-4e93-adb5-0cea4f0b3d42") + ) + (pin "2" + (uuid "5d83a2d0-8ec7-41c6-9e29-3181567725b4") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "DB4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 114.3 190.5 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "4b458d84-9f80-48dc-b175-ff5cf6385908") + (property "Reference" "Cu4" + (at 108.458 190.5 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 116.586 190.5 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 114.835 186.92 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 113.87 190.73 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 113.87 190.73 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "96b1d5d3-1741-43bb-8d0f-2f9e6aeddcfc") + ) + (pin "2" + (uuid "e8f89b3d-210f-4030-84a4-bb133d2a4c59") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Cu4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 240 210 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "4d0ef1e4-3a44-420f-952d-c6b2429690d5") + (property "Reference" "R55" + (at 240.03 207.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k/1%" + (at 240.03 212.09 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 238.222 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 240 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 240 210 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "61be9679-d917-4719-92f6-c607176fba9f") + ) + (pin "2" + (uuid "e82bf322-dbdf-4d3c-ad33-c9f0d875fbc4") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R55") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 354 222 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "4dd2a3d7-276b-4efb-b89f-47280c040af3") + (property "Reference" "R41" + (at 354.33 219.71 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 354.33 224.79 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 352.222 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 354 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 354 222 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "774186dd-cad6-4e4c-931f-ec14c468d6f1") + ) + (pin "2" + (uuid "57f059cf-c15e-42a5-b663-1a78b8eff425") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R41") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 36.83 80.01 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "509cd7b0-f0fd-40b4-a547-87a8a92965a0") + (property "Reference" "Rigb" + (at 38.862 80.01 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 36.83 80.01 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 35.052 80.01 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 36.83 80.01 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 36.83 80.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "e8f04e96-15ef-4934-8f89-24fe492c023a") + ) + (pin "1" + (uuid "16d61341-a654-414c-b795-86c115a7ed9b") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rigb") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 470 55 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "52461a06-4f3c-4dee-b32e-d6497534d73c") + (property "Reference" "Rcc1" + (at 472.032 55 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5.1k" + (at 470 55 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 468.222 55 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 470 55 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 470 55 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "bfe476aa-59a3-49d4-9d6f-fea354c602e7") + ) + (pin "2" + (uuid "778486bd-afc6-483a-b3eb-0df6dd4324ef") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rcc1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Q_NPN_BCE") + (at 153.67 106.68 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "54f9824a-b651-48e8-91fa-651d260ccca2") + (property "Reference" "Q5" + (at 158.242 108.966 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "MMBT3904" + (at 158.75 106.68 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 158.17 108.73 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 153.09 106.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 153.09 106.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "1427feaf-b893-454d-977e-34e0ff8cf97b") + ) + (pin "1" + (uuid "72fbe4d6-9e70-4a40-a508-70080eb16f60") + ) + (pin "3" + (uuid "25770921-4021-4c9e-81fe-518c6f171433") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Drogheda-sym:MP1584EN") + (at 360 120 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "56a2435b-289b-44c2-83c2-1a9fc67e871c") + (property "Reference" "U7" + (at 359.41 116.84 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MP1584EN" + (at 359.41 121.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm" + (at 360 114.92 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 360 112.38 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 360 120 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "94160b42-18cd-4143-aada-d6b2a702cedc") + ) + (pin "2" + (uuid "8f21276c-4c69-46d9-b567-dadd9fff3c78") + ) + (pin "3" + (uuid "65a1a0a7-57bc-4bd3-8965-0f0a358ce9c2") + ) + (pin "4" + (uuid "042101aa-5a49-4bd2-91a4-b746458e83bd") + ) + (pin "5" + (uuid "1095a746-5364-4ef1-a6b7-15ec3ace4a66") + ) + (pin "6" + (uuid "77a374bc-ec64-4a40-91c3-076bbdd319cd") + ) + (pin "7" + (uuid "5242f5bd-8167-4137-83c4-34877e0ce746") + ) + (pin "8" + (uuid "e5751e45-9436-42ea-a565-480fd2e03c2f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "U7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 267.97 127 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "599a4f5c-5b15-41e2-ab7e-ccb6545952ee") + (property "Reference" "H3" + (at 267.97 121.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USART1-RSV (DNP)" + (at 267.97 120.65 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical" + (at 267.97 127 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 267.97 127 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 267.97 127 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "4eeba337-ae63-4429-9ed6-c1c7c5cd93c3") + ) + (pin "2" + (uuid "3d4f9364-36d3-43c6-b6d0-6bdec93be645") + ) + (pin "3" + (uuid "8ce07438-caec-4824-85b2-fdad67e6a85b") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "H3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 348 108 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "5b9bca13-615b-4e5f-bf65-18e42653775b") + (property "Reference" "Cbst2" + (at 347.98 105.41 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "10nF" + (at 347.98 110.49 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 348.965 104.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 348 108 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 348 108 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "bcef1460-0078-4bd8-83aa-96aeb659c9ef") + ) + (pin "2" + (uuid "c132ba27-948e-486a-9ebd-1f67519225e6") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Cbst2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 36.83 71.12 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "5bd98b1a-5035-4524-bae4-b222e5483f9c") + (property "Reference" "Rig" + (at 39.624 71.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "22k" + (at 33.02 71.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 35.602 71.2 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 37.38 71.2 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 37.38 71.2 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "90f12c48-9021-45b4-9405-3f495dbd7ebd") + ) + (pin "2" + (uuid "0822c453-965b-4608-9a0b-5ed3adafc4a8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rig") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 398 178 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "5cc94dd5-898c-4556-9977-76a379c3664c") + (property "Reference" "P13" + (at 397.51 175.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MODO-B-UPLINK (DNP — harness alt)" + (at 397.51 180.34 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 398 178 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 398 178 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 398 178 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "708eed51-4dbd-45af-8930-e72928dfeef7") + ) + (pin "2" + (uuid "94b26dff-660a-4583-a1c8-0e9f8e180613") + ) + (pin "3" + (uuid "10a83071-4664-465a-a81c-e012b2ed5b0c") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 470 100 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "5cf14228-280e-43a7-b9a7-25e7edde6c77") + (property "Reference" "Rmled" + (at 472.032 100 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 470 100 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 468.222 100 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 470 100 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 470 100 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "e1acff54-6ff8-4c7f-a399-d014379b809a") + ) + (pin "2" + (uuid "05df1b33-7f59-406b-8057-cc411b86e80f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rmled") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 134.62 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "5e94c385-9307-4cb3-8207-d99f6d8926e9") + (property "Reference" "PF7" + (at 134.62 15.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 134.366 20.574 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 134.4 19.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 134.4 19.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 134.4 19.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "6b0063c9-2049-421c-83d2-2a2a000d93f8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 238 196 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "5ea4a987-16dc-4456-9ee8-0ab1e9b6b8d9") + (property "Reference" "C31" + (at 237.49 193.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2uF" + (at 237.49 198.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 238.965 192.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 238 196 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 238 196 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "676eb556-1a8e-42a5-bf0e-396b4593b22a") + ) + (pin "2" + (uuid "9f3ef7eb-81ec-4bb0-8f13-d67e047f8d22") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C31") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 180.34 55.88 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "60202028-1109-4cbc-8c85-5ee7f203e0fd") + (property "Reference" "R2" + (at 177.292 55.88 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 183.642 55.88 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 179.092 55.65 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 180.87 55.65 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 180.87 55.65 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "7e5887e5-2e09-4dca-abb0-5b13e70ced93") + ) + (pin "2" + (uuid "cb8636f4-803a-499a-b8ae-df09465988c4") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x02") + (at 300 128 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "672d7489-ac29-41f0-b29c-26f631f47415") + (property "Reference" "P10" + (at 299.72 125.73 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "RESET-EXT" + (at 299.72 130.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (at 300 128 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 300 128 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 300 128 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "83b050d2-ac8e-45b2-a3c1-2e73411c6316") + ) + (pin "2" + (uuid "6e002db0-2ab7-4db6-853c-d721399a5615") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x20") + (at 114.3 59.69 0) + (mirror y) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "682f47f8-b6d3-4bad-afff-5029f9fe5818") + (property "Reference" "J2" + (at 114.3 33.02 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Blackpill-R" + (at 117.856 88.138 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical" + (at 114 59.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 114 59.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 114 59.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "7" + (uuid "feb5b67d-dfa8-4c20-b900-9cdbe28d7ec7") + ) + (pin "9" + (uuid "17f84905-0bab-4a97-b60d-4d23edde49c4") + ) + (pin "11" + (uuid "c6842658-3273-4c30-9707-2f80d2661471") + ) + (pin "8" + (uuid "f0160414-c7d4-4d60-973b-f138d95d8ba9") + ) + (pin "10" + (uuid "358c9a9c-01e2-4407-9387-db5ec9d7385c") + ) + (pin "12" + (uuid "13225707-0387-40fd-b6a9-13861ef5b223") + ) + (pin "5" + (uuid "69f811bc-3b30-4058-8a16-c3955e71f6a4") + ) + (pin "4" + (uuid "8ca859ca-7f11-41e8-b904-57f2e616df67") + ) + (pin "6" + (uuid "c2202001-b06c-4dd5-8516-bc601327e08e") + ) + (pin "18" + (uuid "5ff1766a-a0d7-4989-a694-69b6df6066e2") + ) + (pin "20" + (uuid "c4124adb-3d31-4880-8291-e1a1fd08137f") + ) + (pin "19" + (uuid "6d100891-b5fb-4be0-905f-8473d79bc4c4") + ) + (pin "3" + (uuid "e4b46d7b-57ef-45b0-8ef6-d4c14f81346f") + ) + (pin "2" + (uuid "40663611-af2d-4f67-839e-7912381e2d1f") + ) + (pin "14" + (uuid "1c17913e-9318-43d9-882d-da367fce896b") + ) + (pin "15" + (uuid "f70ee699-7dff-45c7-a21f-2319be44bb53") + ) + (pin "17" + (uuid "4b271c7c-475f-46b6-9064-29a6a22a1656") + ) + (pin "13" + (uuid "14094bcd-20b6-4334-b709-dc50ca6fa219") + ) + (pin "16" + (uuid "26334ac9-bfb0-442f-be73-8886e107c4ec") + ) + (pin "1" + (uuid "c08c4c06-6115-4020-a546-26add83a7bdf") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "J2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:L") + (at 324 178 90) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "6ca6eb84-71c7-48fd-97ff-b84241419ed0") + (property "Reference" "L6" + (at 323.85 175.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "2.2uH/8A" + (at 323.85 180.34 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (at 324 178 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 324 178 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 324 178 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ae7ac139-c92f-40c6-9f6d-0b9c418eba54") + ) + (pin "2" + (uuid "7df6241e-8221-4f16-a0f3-9015e95b975b") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "L6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 243.84 33.02 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "6e0f211a-0b29-40d9-8497-573317e3e00f") + (property "Reference" "D1" + (at 243.84 30.48 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 243.84 29.21 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0805_2012Metric" + (at 243.84 33.02 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 243.84 33.02 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Light emitting diode" + (at 243.84 33.02 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 243.84 33.02 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "5c0cd227-6287-4748-8429-26496a4b79d2") + ) + (pin "2" + (uuid "290a2f8a-396b-442a-b4e4-e5f2485aaf1d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "D1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 30.48 36.83 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "6febc877-d113-4b7a-b5c0-82fa36190d9a") + (property "Reference" "R5" + (at 27.432 36.83 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 33.782 36.83 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 29.252 36.98 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 31.03 36.98 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 31.03 36.98 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "4419aa46-7cdb-47c3-891b-5e77d68faa39") + ) + (pin "1" + (uuid "c690d8fd-a284-4b42-a489-a53db0eb042e") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 43.18 109.22 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "70d4610d-4efe-4601-a562-9399c103313d") + (property "Reference" "C7" + (at 38.608 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 46.736 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 44.145 105.41 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 43.18 109.22 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 43.18 109.22 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "145b000b-a20d-472b-82c7-fd739f106c93") + ) + (pin "2" + (uuid "acedf807-5bd5-45e0-93d1-e24acf39e1a8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Drogheda-sym:SimpleRTK2B_Pro_Socket") + (at 362 60 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "721d3ef5-4772-4593-94bc-7276ca640d83") + (property "Reference" "MOD1" + (at 361.95 37.14 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "simpleRTK2B-Pro on UNO female headers" + (at 361.95 85.4 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Module:Arduino_UNO_R3" + (at 362 54.92 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 362 52.38 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 362 60 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "14" + (uuid "3a5504e3-5be7-4bf8-87ad-89599962d1e6") + ) + (pin "15" + (uuid "771f64d6-5076-4e9f-904e-6f97c0e58cdc") + ) + (pin "16" + (uuid "a5981c13-9749-4f14-9c1a-df498a6ec57f") + ) + (pin "17" + (uuid "6c11931c-7f5a-4a6d-a783-76bbf7418b04") + ) + (pin "18" + (uuid "7afe2d85-8d5f-4c13-944f-647aff9d8efb") + ) + (pin "19" + (uuid "c0296ee4-28a1-465c-9e55-331f2c3d4404") + ) + (pin "20" + (uuid "07556cff-72d5-49bb-b5e3-a2e2a0ff0348") + ) + (pin "21" + (uuid "ba04a24e-5ab2-418e-9399-bb5e91ef902a") + ) + (pin "22" + (uuid "71bd7b9b-039e-4ff3-b683-40741738b12f") + ) + (pin "23" + (uuid "68e10d11-0d32-473c-9da0-f763f5e6b77d") + ) + (pin "24" + (uuid "e5ed77e9-c85e-4ec4-9387-be60f6b3c8c0") + ) + (pin "25" + (uuid "b18a53b4-bdda-4eea-9035-116e7903ca5d") + ) + (pin "26" + (uuid "4743ffc0-eaa9-4f74-8fdd-7298ba13b714") + ) + (pin "27" + (uuid "e1bcc2c9-2d14-4f1d-9b6a-5bed58d27bc3") + ) + (pin "28" + (uuid "1227b10f-5533-4725-b137-5878dc735470") + ) + (pin "29" + (uuid "2b257a2e-2b4f-4a0f-aba5-02a2b074052f") + ) + (pin "30" + (uuid "7c4cf167-8b66-42aa-b4f3-6306e4f63d7a") + ) + (pin "31" + (uuid "43818ba9-f637-4d74-96b2-80409bdbfdf2") + ) + (pin "32" + (uuid "fd0d0996-774c-4ee6-bf61-9698769bd332") + ) + (pin "1" + (uuid "47f7f643-adb1-44df-a110-5481e2191358") + ) + (pin "2" + (uuid "e823859a-4bb6-4b86-bbbb-8173c9aab295") + ) + (pin "3" + (uuid "4b2a5c9c-d434-42b2-af09-a6102e1b0bcd") + ) + (pin "4" + (uuid "a1936f15-ba21-43e3-958b-82b759fee413") + ) + (pin "5" + (uuid "66dbc1ad-a1c5-420c-aace-95e671dc13b3") + ) + (pin "6" + (uuid "acd868a5-1d21-4c64-b1dc-8608f29a1732") + ) + (pin "7" + (uuid "6fa8e515-d3d8-4dd4-a19e-ec7c00099bd8") + ) + (pin "8" + (uuid "3762d645-7212-428f-ac50-3b0f48fb7c69") + ) + (pin "9" + (uuid "7ec02583-4e14-4753-9d00-216dddd3666e") + ) + (pin "10" + (uuid "8d3da921-fb3b-4ff5-91fd-cf9729ae14f7") + ) + (pin "11" + (uuid "3976bc8e-26cd-45c5-b006-1a908e0ea374") + ) + (pin "12" + (uuid "dd55c380-4e8a-452b-ab6b-8714aa67e642") + ) + (pin "13" + (uuid "7a46bc8d-fadc-47a9-b6af-b241697ecd13") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "MOD1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 300 86 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "754a18fd-7854-4a98-9a4c-cfcdacba5676") + (property "Reference" "RB4" + (at 299.72 83.82 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "330R" + (at 299.72 88.9 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 298.222 86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 300 86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 300 86 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "a16d87f2-0c7d-46fc-9825-94a9fc65875b") + ) + (pin "2" + (uuid "f345d01b-214b-4a33-ab07-25e9b71ad48f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "RB4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 204.47 151.13 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "7698e6c2-1447-4cc7-8254-ea6fd0e421b7") + (property "Reference" "Rg" + (at 201.168 151.13 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100R" + (at 208.788 151.13 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 202.812 151.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 204.59 151.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 204.59 151.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "85f63abc-2782-4bc4-ae3e-7ad62db2cf11") + ) + (pin "2" + (uuid "efe65361-e330-4edf-8f2b-91efaada9951") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rg") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 185.42 106.68 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "78797b55-0f8d-47a6-ae79-2ec4fa8ae937") + (property "Reference" "Rled" + (at 189.23 106.68 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 189.23 107.95 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 183.642 106.68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 185.42 106.68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 185.42 106.68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "5b3ed759-9a61-4104-9ceb-a02794a3eccc") + ) + (pin "2" + (uuid "0c17f5f0-0b6e-48a8-96a8-62cc99308b4d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rled") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 88.9 241.3 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "7b3eb52c-3d02-4767-ad81-647c350e39f9") + (property "Reference" "Rfreq" + (at 88.9 238.76 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 88.9 243.84 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 87.122 241.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 88.9 241.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 88.9 241.3 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "63c3a446-a6ac-48d2-8487-6aa68e180eb6") + ) + (pin "2" + (uuid "51dacf70-5a9c-42d4-825d-c45226648e78") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rfreq") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 101.6 241.3 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "7e93d10d-ed9d-4790-bfa7-54e73595efdc") + (property "Reference" "Ren2" + (at 101.6 238.76 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "20k" + (at 101.6 243.84 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 99.822 241.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 101.6 241.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 101.6 241.3 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "c034cc37-b8b9-423e-94d2-ad8a4d1e4039") + ) + (pin "2" + (uuid "1e9a9029-1ad8-476e-8c6b-86530a430020") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Ren2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 334 196 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "7fc7f30b-5769-4386-9828-fc5a252576a5") + (property "Reference" "C32" + (at 334.01 193.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF" + (at 334.01 198.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1210_3225Metric" + (at 334.965 192.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 334 196 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 334 196 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "9bd6750c-f188-4a25-a4ee-2a16cd8c78e9") + ) + (pin "2" + (uuid "e161b617-5ad5-4ed9-b2e9-33764da99b48") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C32") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 30.48 144.78 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "8076dc79-9973-4b18-ab17-881e5fed8e90") + (property "Reference" "R30" + (at 26.924 144.78 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "4.7k" + (at 33.782 144.78 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 29.332 144.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 31.11 144.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 31.11 144.52 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "193cc2c0-1059-48d2-8d09-5364cd028751") + ) + (pin "2" + (uuid "cba28973-96c2-4cd7-aadd-320a01b851f5") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R30") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Jumper:SolderJumper_3_Bridged12") + (at 268 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "80e14ed9-373f-44a0-ad34-e23dcd4af218") + (property "Reference" "JP4" + (at 267.97 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "F0:1" + (at 267.97 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (at 268 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 268 236.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 268 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "d78c7052-82ef-4c51-aad9-83b0fbca7a0b") + ) + (pin "2" + (uuid "275ebb8b-32f7-4935-8f1d-641301c6f956") + ) + (pin "3" + (uuid "6cfae8ab-07d1-41c7-8e95-4d5272958664") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "JP4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 228 222 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "81d0dafb-9504-49f7-b3aa-8568a46c673c") + (property "Reference" "R52" + (at 228.6 219.71 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k/1%" + (at 228.6 224.79 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 226.222 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 228 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 228 222 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "6ac48df1-d5e9-40f7-b3ba-b144d74eae5c") + ) + (pin "2" + (uuid "2c6427fa-ff35-4dde-9d47-c2323960de7d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R52") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 30.48 115.57 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "830c474e-300b-40c4-9ee4-fabcfec74f5d") + (property "Reference" "#PWR04" + (at 30.48 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 30.48 111.76 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 30.48 115.57 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 30.48 115.57 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 30.48 115.57 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "30862ee3-7ac4-4580-9f25-dfad99cc5bc0") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "#PWR04") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 228 210 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "831000c2-b4f9-4b2f-8564-21f7be1c9ff6") + (property "Reference" "R51" + (at 228.6 207.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "287k/1%" + (at 228.6 212.09 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 226.222 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 228 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 228 210 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "adc94d42-1132-4fd8-a2e8-83817ba6ce9b") + ) + (pin "2" + (uuid "1435a0ba-6a7f-4085-9a95-e4f74f7abe30") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R51") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 394 112 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "834d78c9-e3e8-4940-9732-684ec1a297d7") + (property "Reference" "C41" + (at 393.7 109.22 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "22uF" + (at 393.7 114.3 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 394.965 108.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 394 112 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 394 112 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "a6e2226e-8ec5-4ce6-96e6-89cbb8824148") + ) + (pin "2" + (uuid "5278eb2a-89bf-4158-8fdc-0ecf3f190d11") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C41") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Q_NPN_BCE") + (at 368 210 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "83cef213-db41-49ab-b0c9-3658f572f6b4") + (property "Reference" "Q6" + (at 368.3 207.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "MMBT3904" + (at 368.3 212.09 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 373.08 212.54 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 368 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 368 210 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ba7626b7-f048-4f58-8eab-dc59ea6d4ad2") + ) + (pin "2" + (uuid "e9b01347-5aca-4cc4-9a35-39119d480035") + ) + (pin "3" + (uuid "45c274cc-337e-404b-865a-d99e5916e631") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 116.84 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "85243a69-4da1-4573-a80a-bb4ba14ac968") + (property "Reference" "PF3" + (at 116.84 15.748 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 116.84 13.97 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 117.06 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 117.06 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 117.06 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "068b5959-ecf3-4723-be44-aeed8064ac40") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 242.57 113.03 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "85f4f5a4-083f-482c-aa2b-95611da08c8e") + (property "Reference" "Rdfu" + (at 238.76 113.03 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "22k" + (at 246.38 113.03 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 240.792 113.03 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 242.57 113.03 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 242.57 113.03 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "168ce06e-b486-4dd6-b7aa-e4a03c6ee547") + ) + (pin "2" + (uuid "1b7befa1-162e-4efb-8180-82fc378a5aa0") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rdfu") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:TestPoint") + (at 306 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "8b481c96-b7e3-470f-8b20-639b23e0dd83") + (property "Reference" "TP1" + (at 306.07 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "CLPROG" + (at 306.07 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "TestPoint:TestPoint_Pad_D1.5mm" + (at 311.08 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 311.08 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 306 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "187601c9-d2e1-4af1-8c10-1824a1abc3c8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "TP1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x10") + (at 402 40 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "8d4c9880-1dd8-4900-9131-09e1665b1db7") + (property "Reference" "J7" + (at 402.59 36.83 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "XBEE-ROW-1 (VCC/DOUT/DIN)" + (at 402.59 41.91 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical" + (at 402 40 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 402 40 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 402 40 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b10a1c94-f0f7-46d8-b3d1-a426e98cc021") + ) + (pin "2" + (uuid "6082acfa-a92a-4441-8532-2c94ed5c7bdf") + ) + (pin "3" + (uuid "6fa65e98-684f-44c7-9f9e-135179e051cb") + ) + (pin "4" + (uuid "0dfc646c-7cc8-4fd4-932e-8ddedba178d1") + ) + (pin "5" + (uuid "21895eaf-de8c-4977-a5eb-86cd181ab919") + ) + (pin "6" + (uuid "b14088b7-c348-47e8-8b29-8a3ad4f31273") + ) + (pin "7" + (uuid "9f9801f3-ca9d-4221-bd10-011d6aa2296c") + ) + (pin "8" + (uuid "8aabf0ab-5a26-4466-8084-290971595ab6") + ) + (pin "9" + (uuid "dfb1215a-459a-42ab-8365-8ee547290bb6") + ) + (pin "10" + (uuid "492d57d6-40f7-43f7-8b60-cdc5c83437ee") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "J7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Q_PMOS") + (at 214.63 80.01 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "8d92151e-fb60-4bcd-9974-3c10c7817d60") + (property "Reference" "Q1" + (at 214.63 72.39 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "AO3401A" + (at 214.63 71.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 219.71 82.55 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 214.63 80.01 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "P-MOSFET transistor" + (at 214.63 80.01 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "G" + (uuid "2894d992-549a-4df2-8841-322613a782c4") + ) + (pin "D" + (uuid "79451e60-57e0-4392-a364-97c8ba2be003") + ) + (pin "S" + (uuid "fb005981-60fa-4c59-bfff-09d4d2843c84") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 370 240 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "907c321b-1359-48d9-9bc5-c810c15c679a") + (property "Reference" "C24" + (at 369.57 237.49 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 369.57 242.57 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 370.965 236.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 370 240 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 370 240 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "dcacd167-bc75-4356-8668-ba8ad5da482a") + ) + (pin "2" + (uuid "f9d7c027-5514-4069-9225-9a9c51a97648") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C24") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 88.9 215.9 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "90e83e2f-1be7-42fc-911c-422cb1fd2a18") + (property "Reference" "Rcomp" + (at 88.9 213.36 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "40.2k" + (at 88.9 218.44 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 87.122 215.9 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 88.9 215.9 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 88.9 215.9 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "0b6a5539-9a4a-45f8-96d3-d759b638ec3b") + ) + (pin "2" + (uuid "913c8ec7-017d-46bf-bd81-1e4b9470b5a8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rcomp") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Switch:SW_Push") + (at 440 110 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "91abcfa8-e21d-47f9-a4c4-9aee5eac769e") + (property "Reference" "SW4G" + (at 441.27 112.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "RESET" + (at 440 108.476 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS" + (at 440 115.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 440 115.08 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 440 110 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "44f0f0b9-52af-4360-a4b6-c53dd7f0b4aa") + ) + (pin "2" + (uuid "a748e5bc-96e6-4ae3-b383-c129acfdcaf1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "SW4G") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 153.67 128.27 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "93a1f29f-d766-4fe2-8f95-6c3415fa2ea2") + (property "Reference" "Rgs" + (at 150.622 128.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 157.226 128.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 151.892 128.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 153.67 128.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 153.67 128.27 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "7564e965-8664-4793-b78b-92f21459fa06") + ) + (pin "1" + (uuid "9a8e20d3-26db-4ea2-bd2c-b3eddae4603f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rgs") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 344 196 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "95d6f1dc-cd21-4c63-88eb-43997f376c58") + (property "Reference" "C33" + (at 344.17 193.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF" + (at 344.17 198.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1210_3225Metric" + (at 344.965 192.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 344 196 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 344 196 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "90529b62-798c-4d31-9e1e-92d99a5db48f") + ) + (pin "2" + (uuid "e11feaf0-20b6-46bc-ac53-e7d4a062377f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C33") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 394 124 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "9688e92f-c4ae-4d8b-bdfe-7d030099e199") + (property "Reference" "C43" + (at 393.7 121.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100uF/6.3V" + (at 393.7 127 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_6.3x7.7" + (at 394.965 120.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 394 124 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 394 124 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ef283ad1-7e2d-418e-a2a3-fdbcd91af6b9") + ) + (pin "2" + (uuid "c36906b8-7937-4d3a-abcc-5c4f5d52f1f7") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C43") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 111.76 127 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "9a18e923-895d-4049-9293-bd63a498d076") + (property "Reference" "C11" + (at 114.554 127 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 102.87 127 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 112.565 123.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 111.6 127 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 111.6 127 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "e86905e6-a20d-4ea2-9421-c390e63013f2") + ) + (pin "2" + (uuid "43edf8ba-137a-42f7-9a5b-b78dd3667e51") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C11") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 27.94 80.01 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "9a2cd58c-4828-4017-9c98-e78d67ee128f") + (property "Reference" "C9" + (at 31.75 80.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 31.75 81.28 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 28.485 76.58 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 27.52 80.39 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 27.52 80.39 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "f4489b72-7d75-42ed-a70b-95fe2073fa72") + ) + (pin "2" + (uuid "148b41ea-b2fb-496d-a84c-a46c82148171") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 143.51 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "9dedb572-b894-486c-9598-d60e222cf5f4") + (property "Reference" "PF5" + (at 143.51 15.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 143.51 13.97 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 143.51 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 143.51 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 143.51 19.05 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "8265ba29-dbb0-4918-bf2e-4b2d77f478bf") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Q_NMOS") + (at 271.78 104.14 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "a1230757-943d-40eb-9f66-6ca02a536751") + (property "Reference" "Q4" + (at 276.352 105.156 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "AO3400A" + (at 276.352 103.124 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 277.08 106.54 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 272 104 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "N-MOSFET transistor" + (at 272 104 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "D" + (uuid "558701bd-f2f4-4bba-9782-e9a4811054df") + ) + (pin "G" + (uuid "a794c622-e03f-42fc-b858-f01b321a0c0e") + ) + (pin "S" + (uuid "5df8d10b-cfba-4aa1-9e27-38509f841857") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 177.8 222.25 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "a2b3658d-fc41-49f8-8029-418889c4bd0b") + (property "Reference" "R20" + (at 177.8 219.71 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 177.8 224.79 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 176.022 222.25 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 177.8 222.25 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 177.8 222.25 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "13378179-8c61-40f4-bc4b-2eb678464f7f") + ) + (pin "2" + (uuid "9fbfeb2c-0bb1-49dd-adbb-3dc9d964afc2") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R20") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:USB_C_Receptacle_USB2.0_14P") + (at 440 70 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "a549c399-3fd2-4e48-a8bd-8342c72ccb4a") + (property "Reference" "J9" + (at 440 92.225 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USB-C" + (at 440 89.685 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_USB:USB_C_Receptacle_GCT_USB4085" + (at 443.81 70 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 443.81 70 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 440 70 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "A1" + (uuid "3e580107-5596-476e-a17c-27cd671a5417") + ) + (pin "A4" + (uuid "ed9b4e66-c947-4cd4-9b99-26ae157f9654") + ) + (pin "A5" + (uuid "50a60b4c-5d90-46e6-8191-85bf1a3e95ae") + ) + (pin "A6" + (uuid "3e1412d5-3a76-4195-9511-ed0b3cb9d608") + ) + (pin "A7" + (uuid "ecd8a0e6-37ea-47aa-b538-3606aaa30bc0") + ) + (pin "A9" + (uuid "0632b83e-2318-4130-b0f3-16456226f23e") + ) + (pin "A12" + (uuid "69b93f48-ff89-4a7c-9fc1-ef201e54c339") + ) + (pin "B1" + (uuid "8b5bed5e-55f0-4846-a25f-0588382bb3f3") + ) + (pin "B4" + (uuid "af896b1f-3344-4f48-9655-41c4972d3c02") + ) + (pin "B5" + (uuid "4ce743b4-1723-49b9-b104-42720ba1f21f") + ) + (pin "B6" + (uuid "a2942485-64ff-4ad3-9f85-abc5b35bda33") + ) + (pin "B7" + (uuid "d0d0d31b-1de1-4088-a03f-225f8245dda9") + ) + (pin "B9" + (uuid "fddd826a-0ce9-489c-8466-cbcdff20fed2") + ) + (pin "B12" + (uuid "639a841b-9804-426a-8b1d-1f6b79148587") + ) + (pin "SH" + (uuid "0442f740-6103-4991-8bed-709b91450b8b") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "J9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 106.68 19.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "a7c0c74f-7b96-4dd0-b4d8-dc94dcc236c4") + (property "Reference" "PF2" + (at 106.68 15.748 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 106.68 20.32 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 106.68 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 106.68 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 106.68 19.56 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "6ebcb99c-db3e-494a-b9b2-40eb8c029c6d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 386 140 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "a8a875a9-9509-4bd0-bdce-e9001b2b9d21") + (property "Reference" "R61" + (at 386.08 137.16 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "31.6k/1%" + (at 386.08 142.24 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 384.222 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 386 140 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 386 140 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "0389f8ea-9172-4882-a6bf-215681b63689") + ) + (pin "2" + (uuid "c3522e42-1d5c-4850-a435-45dd5c8e4bab") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R61") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 240 222 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "a9649caf-296a-41fb-84ff-3416052a44e2") + (property "Reference" "R50" + (at 240.03 219.71 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "825R/1%" + (at 240.03 224.79 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 238.222 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 240 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 240 222 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b8799775-25c9-4b6d-a71c-3880c5d94bb0") + ) + (pin "2" + (uuid "744df51b-4187-47a2-a3bf-f3aa698e67ba") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R50") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 334 208 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "aa9fbdec-d78c-47ae-bc9f-e7e1c0aa9aee") + (property "Reference" "C34" + (at 334.01 205.74 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "10uF" + (at 334.01 210.82 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 334.965 204.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 334 208 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 334 208 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "15629bdd-20e9-44ba-be61-660c3466a3c6") + ) + (pin "2" + (uuid "b4b8b7f0-2ab4-48f4-b2ae-449e4250c843") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C34") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 30.48 22.86 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ab8b41e3-02a0-4bb4-a62a-3a236009a331") + (property "Reference" "#PWR02" + (at 30.48 16.51 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 30.48 19.05 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 30.48 22.86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 30.48 22.86 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 30.48 22.86 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "632d902c-e8fd-459a-8d9b-6430c95faeee") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "#PWR02") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 348 156 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ac11ec55-d953-404b-a692-ee5071dea8a9") + (property "Reference" "C40" + (at 347.98 153.67 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "22uF" + (at 347.98 158.75 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 348.965 152.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 348 156 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 348 156 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "c53f312e-d847-4447-81f6-582f232e8d1d") + ) + (pin "2" + (uuid "7d94eca8-8d33-4852-a592-588084c98fc2") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "C40") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 35.56 17.78 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "af9f65f9-fd8c-4aaf-be3f-e1bf8e4bbc26") + (property "Reference" "P4" + (at 35.56 12.7 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BATT-1S4P+NTC" + (at 35.56 22.86 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 35.56 17.78 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 35.56 17.78 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 35.56 17.78 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "3" + (uuid "ffdee713-26cf-4770-ae78-9d1e39c56549") + ) + (pin "1" + (uuid "25595972-f430-43ac-a73f-0ddb275f1e0c") + ) + (pin "2" + (uuid "6fd727e7-2de1-4d34-aa4f-299e20a23c4e") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_TVS") + (at 59.69 157.48 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "b66fe2ae-0549-4edb-bcce-f968eb1d4731") + (property "Reference" "D10" + (at 59.69 160.02 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SMBJ33A" + (at 59.69 154.432 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMB" + (at 59.22 157.67 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 59.22 157.67 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Bidirectional transient-voltage-suppression diode" + (at 59.22 157.67 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "3a923731-bd26-44ce-a80d-d7b0d0ed5c30") + ) + (pin "2" + (uuid "1744cdb0-b84f-442c-9329-7323564a9f1a") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "D10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x10") + (at 402 75 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "b68f94b2-3503-42f0-9c64-a2c78ad320b2") + (property "Reference" "J8" + (at 402.59 72.39 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "XBEE-ROW-2" + (at 402.59 77.47 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical" + (at 402 75 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 402 75 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 402 75 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "4f07778a-31dd-405e-9955-cebed08497e8") + ) + (pin "2" + (uuid "8a99de9f-6e9b-4f90-98f4-9157e9f023a0") + ) + (pin "3" + (uuid "1db8463b-2140-43fa-961e-d318d68de150") + ) + (pin "4" + (uuid "94b6a556-85e7-43f6-af29-afae9d3104f5") + ) + (pin "5" + (uuid "61e26cef-5219-4167-bbbe-48d21706ed79") + ) + (pin "6" + (uuid "aef85f54-1093-4522-8f39-80b489a52004") + ) + (pin "7" + (uuid "68f55a3c-3cd1-447d-b768-357afc336445") + ) + (pin "8" + (uuid "ba9870e6-f7fa-4828-aafd-6daf50424350") + ) + (pin "9" + (uuid "dc1ed2e8-f896-49ce-8168-f2692b006359") + ) + (pin "10" + (uuid "821f3d0a-3cd8-47d7-9de6-ab19c4011ff5") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "J8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 252 222 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ba279427-e263-4e1a-bc40-eb53d15e0a19") + (property "Reference" "R56" + (at 251.46 219.71 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 251.46 224.79 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 250.222 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 252 222 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 252 222 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "9f992f6d-7540-4079-9682-01edebc8082a") + ) + (pin "2" + (uuid "32be908c-307e-40a5-8637-3e1b6f0d3d1c") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R56") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 344 132 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "bc56c4f5-e836-4e4c-9693-00d8e16c3068") + (property "Reference" "Rfreq2" + (at 344.17 129.54 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 344.17 134.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 342.222 132 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 344 132 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 344 132 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "a1a2e3ac-c429-439d-8d90-37670f9c0148") + ) + (pin "2" + (uuid "7ba2c980-08ca-488e-a8d2-e0c8be718d07") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rfreq2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 157.48 187.96 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "bfbff7b5-f3f9-4ffc-9080-67e0aa9db717") + (property "Reference" "P5" + (at 157.48 182.88 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "TEMP_PROBE" + (at 157.48 181.61 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 158 188 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 158 188 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 158 188 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "3" + (uuid "0c475bae-7e7b-4bb6-b41b-4314ce4f93a9") + ) + (pin "4" + (uuid "1c9fec2f-89b0-4351-b36d-051ddcd23e33") + ) + (pin "1" + (uuid "17f09300-1e8f-4627-8ace-395b4f3a721a") + ) + (pin "2" + (uuid "942455e2-8b8a-4214-891f-099b116fbef6") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Drogheda-sym:AO4406A") + (at 250 186 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "c071eb4d-93f8-4af8-8260-596cec32cb2d") + (property "Reference" "Q7" + (at 250.19 182.88 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AO4406A" + (at 250.19 187.96 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" + (at 250 180.92 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 250 178.38 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 250 186 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "bb474d1e-4a80-463e-a718-0b49073653a0") + ) + (pin "2" + (uuid "64d03a0f-5a7d-4dd0-9027-02fdca4aed18") + ) + (pin "3" + (uuid "0da4d472-94f6-4832-a685-38dddeee8d8b") + ) + (pin "4" + (uuid "f61bd7b7-4a80-4a03-9f6f-1e6f65ab10f7") + ) + (pin "5" + (uuid "ef8ba91b-7ad4-4389-b6be-1c8d470a5170") + ) + (pin "6" + (uuid "28e6018b-21bc-441d-91b4-7f1042d238e4") + ) + (pin "7" + (uuid "a6a87831-5575-4b53-a350-61788eaab129") + ) + (pin "8" + (uuid "265e4183-acd0-40e1-8f48-b158fab93377") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 95.25 190.5 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "c12a1c5e-4852-4300-9f1e-36ce9beb9704") + (property "Reference" "Cu3" + (at 88.9 190.5 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "100nF" + (at 97.282 190.5 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 95.965 186.19 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 95 190 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 95 190 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "dc452028-aaca-42cb-8a39-3ac0e5adaceb") + ) + (pin "2" + (uuid "58d89d1f-7f25-41eb-bd0f-2be2240206cc") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Cu3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 139.7 215.9 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "c174c690-ab96-4f36-9060-5b212443a30a") + (property "Reference" "Cbst" + (at 139.7 213.36 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "10nF" + (at 139.7 218.44 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 140.665 212.09 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 139.7 215.9 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 139.7 215.9 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "3f88b4d0-e219-45fc-bc3e-3a0846ace997") + ) + (pin "2" + (uuid "3739efc0-650a-436c-81a4-65fed2da4eea") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Cbst") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 354 210 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "c1d0504b-470e-487d-9478-5ab80a6e85c9") + (property "Reference" "R40" + (at 354.33 207.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 354.33 212.09 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 352.222 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 354 210 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 354 210 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "19ee5ed7-a080-453f-8f64-6e9cc844c3bd") + ) + (pin "2" + (uuid "f7b9c030-9336-4cfa-9b29-54a8a340343d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R40") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 27.94 83.82 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "c5330d88-e9f5-468f-9bc5-3d12703297e3") + (property "Reference" "#PWR03" + (at 27.94 77.47 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 27.94 80.01 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 27.94 83.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 27.94 83.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 27.94 83.82 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "049794b5-d360-46b7-859c-024702b7cd80") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "#PWR03") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 315 68 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "c5bd65a2-6622-4d6d-b84b-327eb8f5b2f4") + (property "Reference" "DB3" + (at 314.96 66.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 314.96 71.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0805_2012Metric" + (at 315 68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 315 68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 315 68 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "d5c6a675-ba69-45b0-9ba6-f12f67e35140") + ) + (pin "2" + (uuid "6c667c04-9dce-43c8-9868-95252a2774ae") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "DB3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x02") + (at 72.39 17.78 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "cbecc10d-3a80-4792-908f-1a8bc8c477b7") + (property "Reference" "P2" + (at 72.39 14.732 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5V-IN-SD15B05" + (at 72.39 23.114 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (at 72.39 17.78 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 72.39 17.78 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 72.39 17.78 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "88ca521a-97ab-4946-8e3b-c4dc3d4854c2") + ) + (pin "2" + (uuid "55f59f69-c57c-490a-bfc5-8b04697ab7cc") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 269.24 142.24 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "cc81530d-c86e-43aa-816b-51b6b5004aa6") + (property "Reference" "P3" + (at 269.24 137.16 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "RTK2B-UART1 (DNP — harness alt)" + (at 269.24 135.89 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 269.24 142.24 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 269.24 142.24 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 269.24 142.24 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "4b45c1ab-f760-494e-852e-c6a163f9c7b8") + ) + (pin "2" + (uuid "b8f53d59-f7bf-4bd3-8571-17ce56fc7ddc") + ) + (pin "3" + (uuid "4bbcba30-ce02-49ab-885e-2c99d8187108") + ) + (pin "4" + (uuid "bd2e6ef1-f901-4df9-8bca-f881524a86f5") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 101.6 215.9 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ce46626d-3f8d-41c0-b5b3-38f5530498d6") + (property "Reference" "Ren1" + (at 101.6 213.36 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 101.6 218.44 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 99.822 215.9 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 101.6 215.9 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 101.6 215.9 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "02258399-50e3-4617-95de-5754a5ab38d3") + ) + (pin "2" + (uuid "e85be67f-e69b-4b66-912d-c67367cc0e06") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Ren1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Polyfuse") + (at 161.29 57.15 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "d2cddde5-6919-4d00-bf21-82f62c607400") + (property "Reference" "F1" + (at 158.242 57.15 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PPTC 3A" + (at 166.878 57.15 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Fuse:Fuse_1812_4532Metric" + (at 162.22 52.22 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 160.95 57.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resettable fuse, polymeric positive temperature coefficient" + (at 160.95 57.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "3094d434-c948-4256-8dca-10dfd86293bf") + ) + (pin "2" + (uuid "8dc9366c-35ff-475b-8c87-d7a0c7fec4f1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "F1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 294 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "d6d1b9c4-4f06-4bee-a9ea-e870fac42bb7") + (property "Reference" "R58" + (at 293.37 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 293.37 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 292.222 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 294 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 294 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "10fdeb16-e1d4-4769-b009-51b23b50722a") + ) + (pin "2" + (uuid "2052cf7f-3e45-46f9-bc05-b97d23ff65c1") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R58") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 76.2 134.62 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "d80aba5d-088c-41ff-9acf-6f61bcd96d3a") + (property "Reference" "Rrp" + (at 79.248 134.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 72.898 134.62 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 74.662 134.46 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 76.44 134.46 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 76.44 134.46 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "bf89b073-a441-4145-b73c-8cf1445c03d0") + ) + (pin "2" + (uuid "de771322-d9fe-40b9-a0a0-601dcf35380a") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rrp") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x20") + (at 105.41 59.69 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "d8e3c98e-06a5-4587-afa4-e50d91724aab") + (property "Reference" "J1" + (at 105.41 33.02 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Blackpill-L" + (at 101.6 87.884 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical" + (at 105.03 59.15 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 105.03 59.15 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 105.03 59.15 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "11" + (uuid "02e83de2-be44-4eb7-b9d5-4334e2e0bf44") + ) + (pin "12" + (uuid "f0bfd4dc-9f13-48e6-ab11-92720866b11f") + ) + (pin "13" + (uuid "b92ffc37-1988-40c7-bf2f-057a66f07016") + ) + (pin "14" + (uuid "452f823b-94d8-4e54-b631-fcca79292965") + ) + (pin "15" + (uuid "28624f5c-6791-4adc-ae02-d11d25586f87") + ) + (pin "16" + (uuid "21121965-d55c-4aa2-92c1-e04194768b76") + ) + (pin "17" + (uuid "b54e6c7b-5614-4cf7-a834-0fbfb307ae78") + ) + (pin "18" + (uuid "90eed9fa-a58d-443c-8638-62f6826db0b7") + ) + (pin "19" + (uuid "0660da7c-c8c5-4aa2-8ce3-1c30c5c65597") + ) + (pin "20" + (uuid "fad5ef04-9800-4081-a16d-9c750e1aafc4") + ) + (pin "3" + (uuid "95c0389c-30f7-4fcb-a18f-c44eac8fbb23") + ) + (pin "4" + (uuid "1fa38abc-130d-4983-9de3-4ee0daa8df47") + ) + (pin "5" + (uuid "7a7c6347-02c8-4bb5-b3d9-d81d8e047be6") + ) + (pin "6" + (uuid "5d4d224f-792d-43d6-aa88-2bf91f4d4834") + ) + (pin "7" + (uuid "d44d5396-5588-47fd-adee-b0d49feb60ab") + ) + (pin "8" + (uuid "29600f0d-e7ed-4283-8fa5-b86ecc24eb7b") + ) + (pin "10" + (uuid "1ad6e8c8-c9e8-4dce-bbdf-d144289eac4d") + ) + (pin "9" + (uuid "b5d514e3-dfee-4591-80b9-ddcc04c2d9ba") + ) + (pin "1" + (uuid "36b810e8-24fb-4f9a-8c1e-92c644a26d7d") + ) + (pin "2" + (uuid "a872d38d-48ce-4fc4-839d-90e1d60aa7b0") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "J1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Jumper:SolderJumper_2_Open") + (at 190.5 228.6 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "d9dd9b5f-4e83-435b-a956-d7b65d6c6959") + (property "Reference" "JP1" + (at 190.5 226.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "0R" + (at 190.5 231.14 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm" + (at 190.5 228.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 190.5 220.98 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 190.5 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "0dec1861-3a1f-450c-9f65-f232d3a56869") + ) + (pin "2" + (uuid "90e83bae-7e08-4cee-bf65-91f3f34c622c") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "JP1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 282 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "da626e8e-77eb-4f25-8765-1171ab4de91b") + (property "Reference" "R57" + (at 281.94 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k" + (at 281.94 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 280.222 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 282 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 282 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "bb8914c3-d8e4-4be4-a910-157efeb8c2d3") + ) + (pin "2" + (uuid "c5b26a8d-4771-4533-82f7-439f889ce247") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R57") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 177.8 76.2 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "dd1f6817-8235-47c0-aac4-dc44fbecdf60") + (property "Reference" "R3" + (at 174.498 76.2 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 181.102 76.2 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 176.242 76.16 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 178.02 76.16 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 178.02 76.16 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "db88c6e6-0c8b-4ed8-952e-cdb630ded3a0") + ) + (pin "2" + (uuid "09f835d6-afde-468a-81d5-fcc00cd2392d") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 139.7 241.3 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "dfe23957-a87d-4d76-bfd5-a89bd95bb431") + (property "Reference" "Dbk" + (at 139.7 238.76 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SS34" + (at 139.7 243.84 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMA" + (at 139.7 241.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 139.7 241.3 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 139.7 241.3 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "0a48f4a5-1a67-4f6e-8f06-88014b47d0f8") + ) + (pin "2" + (uuid "0ee3e385-0985-4a89-8d99-f8d9d6c9be9a") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Dbk") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 248 172 90) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "e0246099-52be-43fe-9a8e-614e2d10715f") + (property "Reference" "RS1" + (at 247.65 168.91 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "8mR/1%" + (at 247.65 173.99 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_1206_3216Metric" + (at 248 173.778 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 248 172 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 248 172 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "70818042-58b4-43c6-85b0-b4272d3ffc75") + ) + (pin "2" + (uuid "e106f672-d653-4560-a578-99a758d8986f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "RS1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Zener") + (at 81.28 100.33 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "e200e9b2-4536-4e22-b8c3-1ea4012d0549") + (property "Reference" "DzG" + (at 81.28 103.632 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BZX84C15" + (at 81.28 96.774 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 81.52 99.95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 81.52 99.95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Zener diode" + (at 81.52 99.95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "5b630afd-d7b0-45de-8b55-3494de701269") + ) + (pin "2" + (uuid "a5f0b60d-e287-42c2-aeb0-07ffebcb85d9") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "DzG") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 470 68 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "e2807b21-209d-4241-80f4-b316ec733a73") + (property "Reference" "Rcc2" + (at 472.032 68 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5.1k" + (at 470 68 90) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 468.222 68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 470 68 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 470 68 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ec7ce2f1-b15a-462d-85e1-d66b3c0af83f") + ) + (pin "2" + (uuid "48affffd-c7ad-4eb6-a1fe-ed6c5ad584b5") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rcc2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 30.48 48.26 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "e3e3de1a-9deb-4176-8099-c323b1f76bad") + (property "Reference" "R6" + (at 27.94 48.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 33.528 48.26 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 29.252 48.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 31.03 48.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 31.03 48.82 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "83d7b61b-bad8-484e-a9e3-359abccee5a6") + ) + (pin "1" + (uuid "d2113bb8-c7d7-40f3-bbb6-857051859415") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x02") + (at 276.86 33.02 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ea0a13a6-5173-40ae-b75c-76f7be6be64d") + (property "Reference" "P8" + (at 276.86 30.48 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PANEL_LED" + (at 276.86 38.862 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical" + (at 276.86 33.02 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 276.86 33.02 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 236.22 9.906 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "6f3abc59-4e84-499f-84b1-4748a1a8e7f9") + ) + (pin "2" + (uuid "5b45105d-9acf-4bb3-8f57-215834b15a15") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "P8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 322 196 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "eab7bcbc-d8ec-43b0-a61b-f87ad1a01e1d") + (property "Reference" "R53" + (at 322.58 193.04 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "499k/1%" + (at 322.58 198.12 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 320.222 196 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 322 196 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 322 196 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "933617f1-228d-4222-8750-d957fab94ce6") + ) + (pin "2" + (uuid "33b0f55f-bb05-497e-9941-8c3a67ee58ff") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R53") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 338 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ebdf89f4-00df-4fac-8be0-8e5635d980c4") + (property "Reference" "PF9" + (at 337.82 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "PWR_FLAG" + (at 337.82 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 338 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 338 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 338 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ae292925-599f-4b97-9178-d10ce172a656") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "PF9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 300 50 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ec980939-7314-4d25-88ad-6e654476a4ea") + (property "Reference" "RB2" + (at 299.72 46.99 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "330R" + (at 299.72 52.07 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 298.222 50 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 300 50 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 300 50 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "db383d77-ef73-42cf-891d-8bfa3f124aea") + ) + (pin "2" + (uuid "837d49c7-886c-44e4-a213-f8610d5e9108") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "RB2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 88.9 228.6 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "ee7a5685-bfb6-4fc1-b8bd-332f7991749e") + (property "Reference" "Ccomp" + (at 88.9 226.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2nF" + (at 88.9 231.14 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 89.865 224.79 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 88.9 228.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 88.9 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "1c994a8c-a397-49d6-bc11-001251a807ed") + ) + (pin "2" + (uuid "0a1c4104-7f0d-471f-b089-67f413e51496") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Ccomp") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Q_NMOS") + (at 205.74 121.92 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "efaa6614-fd47-4e18-a26d-7ef501ce1b02") + (property "Reference" "Q2" + (at 210.82 123.19 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "AO3400A" + (at 210.82 121.412 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 211.43 124.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 206.35 122.06 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "N-MOSFET transistor" + (at 206.35 122.06 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "D" + (uuid "e444b702-9468-40f3-ba8e-1cab63c1e425") + ) + (pin "G" + (uuid "44f35579-e3b3-44e5-a65c-826e3cd2695e") + ) + (pin "S" + (uuid "9fe5c18d-fd5f-4f23-a127-32585ebcb3ca") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D") + (at 384 198 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "f1652b1f-7436-46f5-b5fb-3a326d04df21") + (property "Reference" "D6" + (at 383.54 195.58 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1N4148W" + (at 383.54 200.66 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-123" + (at 384 198 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 384 198 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 384 198 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "966182c0-c621-4276-bf67-5c911dc8117d") + ) + (pin "2" + (uuid "97ab6602-d80c-4773-8d91-cd0506c81fd5") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "D6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 179.07 146.05 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "f2219343-8816-4b76-a6c5-7e65c33efb4e") + (property "Reference" "Rts" + (at 182.88 146.05 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 182.88 147.32 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 177.842 145.95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 179.62 145.95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "Resistor" + (at 179.62 145.95 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "db2ddd1c-613c-4372-a545-9df7e780a88c") + ) + (pin "2" + (uuid "ca9b4185-b25d-4e35-a955-136739b0811f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Rts") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Jumper:SolderJumper_3_Bridged12") + (at 254 252 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "f39526a1-e8cb-47dc-b882-e1ccf7b86bc1") + (property "Reference" "JP3" + (at 254 248.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "F1:0" + (at 254 254 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm" + (at 254 252 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 254 236.76 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 254 252 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "d7298633-c78a-413b-bfaf-9d731f7ebded") + ) + (pin "2" + (uuid "a3ebdb96-2f34-4fa9-834a-4bc87ba3e135") + ) + (pin "3" + (uuid "c0fcf0ad-4fa5-4b54-8f7c-462991577ac8") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "JP3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 376 124 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "f616d9e5-ead0-479d-a3d0-aef7be989dd2") + (property "Reference" "Dbk2" + (at 375.92 121.92 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SS34" + (at 375.92 127 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMA" + (at 376 124 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 376 124 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 376 124 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "96abbba1-c5a4-4859-b445-112c4d871576") + ) + (pin "2" + (uuid "e6e0aef2-a14c-4a95-a809-a1e18cbd0d7f") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Dbk2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:L") + (at 152.4 228.6 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "f89c0e54-d73a-4b33-986a-23ec923edc55") + (property "Reference" "L2" + (at 152.4 226.06 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uH" + (at 152.4 231.14 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Inductor_SMD:L_Bourns-SRU8028_8.0x8.0mm" + (at 152.4 228.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 152.4 228.6 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 152.4 228.6 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "6df5f967-a2e7-4b04-ac65-fbd626650bb9") + ) + (pin "2" + (uuid "4d707f96-a267-49aa-916b-24b2dc63dded") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "L2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Q_PMOS") + (at 83.82 115.57 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "fcb3721a-452e-4292-9c5f-019bc1366485") + (property "Reference" "Q10" + (at 88.646 117.602 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "IRFR5305" + (at 88.646 115.57 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:TO-252-2" + (at 89.38 118.65 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "" + (at 84.3 116.11 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "P-MOSFET transistor" + (at 84.3 116.11 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "D" + (uuid "56b814bf-8719-404d-8165-43c1f22ebfe9") + ) + (pin "G" + (uuid "c8f159cf-4f33-4ac3-83bb-f33d46c0ec5f") + ) + (pin "S" + (uuid "2074fc01-d5e1-4688-a763-25d1319d8270") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "Q10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 322 208 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "fda4b39a-4b1b-4dc2-b68e-50dd67534ea6") + (property "Reference" "R54" + (at 322.58 205.74 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100k/1%" + (at 322.58 210.82 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 320.222 208 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 322 208 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 322 208 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ff53c978-f96d-4cd2-8a21-d0a094b53011") + ) + (pin "2" + (uuid "090ab994-43ab-438d-bd58-4c7f0cecf31c") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "R54") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Relay:G5V-1") + (at 370 185 0) + (unit 1) + (body_style 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (in_pos_files yes) + (dnp no) + (uuid "fffd3c33-feb9-47e3-aa19-730ba833e712") + (property "Reference" "K1" + (at 381.43 188.81 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "G5V-1 DC5" + (at 381.43 186.27 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Relay_THT:Relay_SPDT_Omron_G5V-1" + (at 398.702 184.238 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Datasheet" "~" + (at 370 185 0) + (hide yes) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Description" "" + (at 370 185 0) + (show_name no) + (do_not_autoplace no) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "692a2876-95e8-4506-88eb-27b6c413eacd") + ) + (pin "2" + (uuid "868fde61-db7f-4e9c-8003-57d7c7f1b229") + ) + (pin "5" + (uuid "cdad9417-022d-4db1-bd2d-02129dc228b1") + ) + (pin "6" + (uuid "733152bc-0da0-4da8-b743-d36216bbb205") + ) + (pin "9" + (uuid "db74a842-9e33-4fba-bd5e-c2a059a90906") + ) + (pin "10" + (uuid "f84a1568-fb0d-43f8-9fc1-defb71674bfa") + ) + (instances + (project "hbox-watchdog-v3-PROD" + (path "/561403b3-895e-4153-a7be-3876ae930d43" + (reference "K1") + (unit 1) + ) + ) + ) + ) + (group "" + (uuid "15fee2fc-7879-496f-84bc-6cf4ed954311") + (members "06c3a53f-9def-4275-a30f-3fb760e89331" "1d5656dc-e27c-441a-a8db-5c8a89da32c9" + "253305d5-99e0-4d6b-8e08-c1f6711de525" "283163fd-b650-4716-953f-363d526d8aa1" + "2c96de3b-c87e-4648-a4de-adb0d310b25a" "2df77661-1a0c-4d05-94dd-d2fca60bda73" + "2f3d61ad-fce6-4b87-a59f-dab759e66659" "30802635-43c6-412b-891e-3e3b553ff2b8" + "3782fc93-2fd9-47ba-ae0d-6910be6231a3" "412e002c-f046-4bcb-a409-11b8be8e2cba" + "4d1c3ee0-a05c-4f75-b413-012265da5b55" "5106f0a6-0988-49be-98a6-2c2a78305c07" + "5213793d-531b-47df-8cea-bac40ff57967" "53203ae8-44c9-4d18-bed6-1602485431a1" + "5dddf7b9-d4ae-4e8b-83ff-485e36e23b6f" "61b911e0-14fe-4ed1-b311-dd2d324c792c" + "682f47f8-b6d3-4bad-afff-5029f9fe5818" "6f128d49-ffcb-4d7a-8ea2-e7ac83a6bcd9" + "7279ae0b-eecc-4601-a5cf-016baa5cf530" "7721c000-5374-4e7e-9234-ab22c30410b3" + "7f2e370d-1e8d-4b6c-9046-77e41321cf05" "80bd8bab-4a4e-4ecc-9e39-4715780ab3a1" + "818aaeb6-7779-4eec-ab0c-6d6f87454b59" "8642574e-c692-46c1-8a86-98c8c23e6aec" + "87e7c44e-5d3f-4832-a73e-462782cc36a9" "88cb4fd7-9e90-4142-9eeb-f9fca5ded373" + "89ce46fb-c44a-4833-b661-3ced15c6060c" "8aa5f603-1a89-46a5-9eed-59b17669426f" + "8f1d9d24-c6c0-4f82-bf40-710c85f5bbfa" "9b5fe168-5e98-4138-b2ae-c6c6e8daaa68" + "9c00703d-3ba5-4bd5-8494-283efdc67101" "a1724d4f-b5f5-4ead-9cf6-63ad2c55701f" + "a4b49458-e33c-4d95-bca6-857491d371a6" "a97e84cd-482e-42cc-9939-cd43c1ab16f7" + "ab7c1371-b11a-4347-9be2-62443c929726" "b296d711-b9dc-414f-9cfa-78246c1a741d" + "b4f48aae-2b6b-486d-ad27-ea5457ca11d7" "d06a8d91-b151-40b9-b892-765b90e84413" + "d2951a90-8039-4bbc-9ffe-947751ddda96" "d59803c4-7bd6-4aac-b99d-6ba6a34d054b" + "d71e6c5e-4bba-4e68-a0eb-badab8b4aa5b" "d8e3c98e-06a5-4587-afa4-e50d91724aab" + "db567d29-a47a-4f17-aea7-70a29c513b02" "dc006fb4-5606-4bd7-9e24-42bab9cf7459" + "e7bc2b41-ed79-46c4-b9a8-2b6f6db42204" "ed2d54ef-41af-4085-b217-727c441d4fd1" + "fc8a3e3d-429e-43ca-9564-236fe1304818" + ) + ) + (group "" + (uuid "6e00c5a9-e0b1-46c1-8c2d-38139eb8c46d") + (members "155f3dd3-a422-4d5c-bab8-0476605c7f21" "2e013394-2da9-4b13-9b45-d920ad7ce7de" + "a7c0c74f-7b96-4dd0-b4d8-dc94dcc236c4" + ) + ) + (group "" + (uuid "a2871799-8439-4562-9fc6-cfe73647aa95") + (members "2484bb1d-96e8-497c-a824-6524c72721e1" "a404377f-d45a-40f4-9367-da91b866738d") + ) + (group "" + (uuid "a3aae7b2-f249-445a-b9b0-a1d0eb372120") + (members "060cfd85-b01d-4dcd-8ea3-5e8f6cfc246d" "6f75153d-b269-42e1-98c0-4fc39a37ce54" + "85243a69-4da1-4573-a80a-bb4ba14ac968" + ) + ) + (sheet_instances + (path "/" + (page "1") + ) + ) + (embedded_fonts no) +) diff --git a/03-Architecture-Hardware/kicad/hbox-watchdog-v3.kicad_sch b/03-Architecture-Hardware/kicad/hbox-watchdog-v3.kicad_sch index 42e47e5..8dbb217 100644 --- a/03-Architecture-Hardware/kicad/hbox-watchdog-v3.kicad_sch +++ b/03-Architecture-Hardware/kicad/hbox-watchdog-v3.kicad_sch @@ -8125,7 +8125,7 @@ (uuid "366dc5b6-ee83-41c3-b293-2006e1bf3936") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P1") (unit 1) @@ -8218,7 +8218,7 @@ (uuid "4e76e10e-2d0c-43b3-8055-703091199cdf") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "U4") (unit 1) @@ -8299,7 +8299,7 @@ (uuid "1c13cba4-4172-41c1-bdda-8c9098cfbf50") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C10") (unit 1) @@ -8384,7 +8384,7 @@ (uuid "79eca317-fb03-4fca-8657-260cb52ef2df") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P6") (unit 1) @@ -8463,7 +8463,7 @@ (uuid "87a404bf-a0ac-44e9-9095-36faf5d58bb2") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D2") (unit 1) @@ -8538,7 +8538,7 @@ (uuid "7ed5821a-3db3-4580-9450-c785f04167c1") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR01") (unit 1) @@ -8617,7 +8617,7 @@ (uuid "42f6b694-1c91-46b3-bcea-1722bb7c8ae1") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rtp") (unit 1) @@ -8694,7 +8694,7 @@ (uuid "4285b2d3-c574-445a-ae5f-381bad44f452") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF1") (unit 1) @@ -8773,7 +8773,7 @@ (uuid "b1b2a1cb-dc0d-4cba-b4a8-16883417ca5d") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R7") (unit 1) @@ -8854,7 +8854,7 @@ (uuid "9a36d3a5-30dd-4d4f-a621-dcaa614acbea") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C3") (unit 1) @@ -8941,7 +8941,7 @@ (uuid "1094a3d6-c031-429d-8145-d6aa95bb7e76") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "U3") (unit 1) @@ -9018,7 +9018,7 @@ (uuid "95b92132-7328-4107-b812-e2f9a24f531f") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF4") (unit 1) @@ -9098,7 +9098,7 @@ (uuid "dfeac1f4-e385-47dd-aef2-97c789ca893b") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D5") (unit 1) @@ -9177,7 +9177,7 @@ (uuid "e6be58ae-9e7c-4af4-9ac1-d281983a5d7f") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R8") (unit 1) @@ -9258,7 +9258,7 @@ (uuid "19c05997-8e39-4a72-892c-1e7e1a043f6d") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C5") (unit 1) @@ -9337,7 +9337,7 @@ (uuid "fe38243c-2db2-42bc-b91c-764c644440bb") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R1") (unit 1) @@ -9414,7 +9414,7 @@ (uuid "aac6d3dc-7b73-40ec-8206-94e94a11ca6f") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF6") (unit 1) @@ -9493,7 +9493,7 @@ (uuid "0b836478-381e-473b-9586-e8832193dca9") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R31") (unit 1) @@ -9574,7 +9574,7 @@ (uuid "e8f89b3d-210f-4030-84a4-bb133d2a4c59") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Cu4") (unit 1) @@ -9656,7 +9656,7 @@ (uuid "c4d85fe2-8dc5-45c8-928a-dded431a655b") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "U2") (unit 1) @@ -9740,7 +9740,7 @@ (uuid "25770921-4021-4c9e-81fe-518c6f171433") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q5") (unit 1) @@ -9822,7 +9822,7 @@ (uuid "8ce07438-caec-4824-85b2-fdad67e6a85b") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "H3") (unit 1) @@ -9901,7 +9901,7 @@ (uuid "0822c453-965b-4608-9a0b-5ed3adafc4a8") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rig") (unit 1) @@ -9978,7 +9978,7 @@ (uuid "6b0063c9-2049-421c-83d2-2a2a000d93f8") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF7") (unit 1) @@ -10057,7 +10057,7 @@ (uuid "cb8636f4-803a-499a-b8ae-df09465988c4") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R2") (unit 1) @@ -10191,7 +10191,7 @@ (uuid "c08c4c06-6115-4020-a546-26add83a7bdf") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "J2") (unit 1) @@ -10282,7 +10282,7 @@ (uuid "290a2f8a-396b-442a-b4e4-e5f2485aaf1d") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D1") (unit 1) @@ -10361,7 +10361,7 @@ (uuid "c690d8fd-a284-4b42-a489-a53db0eb042e") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R5") (unit 1) @@ -10442,7 +10442,7 @@ (uuid "acedf807-5bd5-45e0-93d1-e24acf39e1a8") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C7") (unit 1) @@ -10521,7 +10521,7 @@ (uuid "efe65361-e330-4edf-8f2b-91efaada9951") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rg") (unit 1) @@ -10600,7 +10600,7 @@ (uuid "0c17f5f0-0b6e-48a8-96a8-62cc99308b4d") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rled") (unit 1) @@ -10679,7 +10679,7 @@ (uuid "cba28973-96c2-4cd7-aadd-320a01b851f5") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R30") (unit 1) @@ -10754,7 +10754,7 @@ (uuid "30862ee3-7ac4-4580-9f25-dfad99cc5bc0") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR04") (unit 1) @@ -10831,7 +10831,7 @@ (uuid "068b5959-ecf3-4723-be44-aeed8064ac40") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF3") (unit 1) @@ -10910,7 +10910,7 @@ (uuid "1b7befa1-162e-4efb-8180-82fc378a5aa0") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rdfu") (unit 1) @@ -10994,7 +10994,7 @@ (uuid "fb005981-60fa-4c59-bfff-09d4d2843c84") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q1") (unit 1) @@ -11073,7 +11073,7 @@ (uuid "9a8e20d3-26db-4ea2-bd2c-b3eddae4603f") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rgs") (unit 1) @@ -11154,7 +11154,7 @@ (uuid "43edf8ba-137a-42f7-9a5b-b78dd3667e51") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C11") (unit 1) @@ -11235,7 +11235,7 @@ (uuid "148b41ea-b2fb-496d-a84c-a46c82148171") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "C9") (unit 1) @@ -11312,7 +11312,7 @@ (uuid "8265ba29-dbb0-4918-bf2e-4b2d77f478bf") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF5") (unit 1) @@ -11396,7 +11396,7 @@ (uuid "5df8d10b-cfba-4aa1-9e27-38509f841857") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q4") (unit 1) @@ -11473,7 +11473,7 @@ (uuid "6ebcb99c-db3e-494a-b9b2-40eb8c029c6d") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "PF2") (unit 1) @@ -11548,7 +11548,7 @@ (uuid "632d902c-e8fd-459a-8d9b-6430c95faeee") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR02") (unit 1) @@ -11627,7 +11627,7 @@ (uuid "1744cdb0-b84f-442c-9329-7323564a9f1a") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "D10") (unit 1) @@ -11712,7 +11712,7 @@ (uuid "942455e2-8b8a-4214-891f-099b116fbef6") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P5") (unit 1) @@ -11793,7 +11793,7 @@ (uuid "58d89d1f-7f25-41eb-bd0f-2be2240206cc") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Cu3") (unit 1) @@ -11868,7 +11868,7 @@ (uuid "049794b5-d360-46b7-859c-024702b7cd80") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "#PWR03") (unit 1) @@ -11947,7 +11947,7 @@ (uuid "55f59f69-c57c-490a-bfc5-8b04697ab7cc") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P2") (unit 1) @@ -12032,7 +12032,7 @@ (uuid "bd2e6ef1-f901-4df9-8bca-f881524a86f5") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P3") (unit 1) @@ -12111,7 +12111,7 @@ (uuid "8dc9366c-35ff-475b-8c87-d7a0c7fec4f1") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "F1") (unit 1) @@ -12190,7 +12190,7 @@ (uuid "de771322-d9fe-40b9-a0a0-601dcf35380a") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rrp") (unit 1) @@ -12323,7 +12323,7 @@ (uuid "a872d38d-48ce-4fc4-839d-90e1d60aa7b0") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "J1") (unit 1) @@ -12402,7 +12402,7 @@ (uuid "09f835d6-afde-468a-81d5-fcc00cd2392d") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R3") (unit 1) @@ -12481,7 +12481,7 @@ (uuid "a5f0b60d-e287-42c2-aeb0-07ffebcb85d9") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "DzG") (unit 1) @@ -12560,7 +12560,7 @@ (uuid "d2113bb8-c7d7-40f3-bbb6-857051859415") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "R6") (unit 1) @@ -12639,7 +12639,7 @@ (uuid "5b45105d-9acf-4bb3-8f57-215834b15a15") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P8") (unit 1) @@ -12723,7 +12723,7 @@ (uuid "9fe5c18d-fd5f-4f23-a127-32585ebcb3ca") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q2") (unit 1) @@ -12802,7 +12802,7 @@ (uuid "ca9b4185-b25d-4e35-a955-136739b0811f") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Rts") (unit 1) @@ -12886,7 +12886,7 @@ (uuid "2074fc01-d5e1-4688-a763-25d1319d8270") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "Q10") (unit 1) @@ -12965,7 +12965,7 @@ (uuid "2d4898dd-6757-48d3-88a3-f55ff385d312") ) (instances - (project "hbox-watchdog-v3" + (project "hbox-watchdog-v3-PROD" (path "/561403b3-895e-4153-a7be-3876ae930d43" (reference "P4") (unit 1) diff --git a/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD.zip b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD.zip new file mode 100644 index 0000000..8c06151 Binary files /dev/null and b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD.zip differ diff --git a/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_bom.csv b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_bom.csv new file mode 100644 index 0000000..a09bc26 --- /dev/null +++ b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_bom.csv @@ -0,0 +1,79 @@ +Designator,Footprint,Quantity,Value,LCSC Part # +C10,CP_Elec_6.3x7.7,1,47uF/50V, +"C11, C24, C5, C7, C9, CU3, CU4",0603,7,100nF, +C22,1210,1,22uF/50V, +C23,0805,1,22uF/16V, +C3,CP_Elec_6.3x7.7,1,47uF, +"C30, C34",0805,2,10uF, +C31,0603,1,2.2uF, +"C32, C33",1210,2,47uF, +"C35, C40, C41",0805,3,22uF, +C43,CP_Elec_6.3x7.7,1,100uF/6.3V, +"CBST, CBST2",0603,2,10nF, +"CCOMP, CCOMP2",0603,2,2.2nF, +"D1, D4G, DB1, DB2, DB3, DB4",0805,6,LED, +D10,D_SMB,1,SMBJ33A,C224019 +"D2, DBK, DBK2",D_SMA,3,SS34, +D5,D_SOD-123,1,BAT54, +D6,D_SOD-123,1,1N4148W, +DZG,SOT-23,1,BZX84C15,C80857 +F1,1812,1,PPTC 3A,C20627123 +H3,PinHeader_1x03_P2.54mm_Vertical,1,USART1-RSV (DNP), +J1,PinSocket_1x20_P2.54mm_Vertical,1,Blackpill-L, +J2,PinSocket_1x20_P2.54mm_Vertical,1,Blackpill-R, +J7,PinSocket_1x10_P2.00mm_Vertical,1,XBEE-ROW-1 (VCC/DOUT/DIN), +J8,PinSocket_1x10_P2.00mm_Vertical,1,XBEE-ROW-2, +J9,USB_C_Receptacle_GCT_USB4085,1,USB-C, +JP1,SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm,1,0R, +JP2,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,F2:Li-ion, +JP3,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,F1:0, +JP4,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,F0:1, +K1,Relay_SPDT_Omron_G5V-1,1,G5V-1 DC5, +L2,L_Bourns-SRU8028_8.0x8.0mm,1,10uH,C17700171 +L6,L_Bourns-SRU8028_8.0x8.0mm,1,2.2uH/8A,C17700165 +L7,L_Bourns-SRU8028_8.0x8.0mm,1,10uH/2A,C17700171 +MH1,MountingHole_3.2mm,1,MH1_3.2mm, +"MH2, MH3, MH4",MountingHole_3.2mm,3,MountingHole_3.2mm, +MOD1,Arduino_UNO_R3,1,simpleRTK2B-Pro on UNO female headers, +P1,"TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal",1,GX16-5, +P10,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,RESET-EXT, +P11,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,CUTOFF-SW, +P12,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,NTC-HOTSPOT, +P13,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,MODO-B-UPLINK (DNP — harness alt), +P2,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,5V-IN-SD15B05, +P3,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,RTK2B-UART1 (DNP — harness alt), +P4,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,BATT-1S4P+NTC, +P5,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,TEMP_PROBE, +P6,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,FAN, +P8,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,PANEL_LED, +Q1,SOT-23,1,AO3401A, +Q10,TO-252-2,1,IRFR5305,C2624 +"Q2, Q4",SOT-23,2,AO3400A, +"Q5, Q6",SOT-23,2,MMBT3904, +Q7,SOIC-8_3.9x4.9mm_P1.27mm,1,AO4406A,C35349 +"R1, R3, R40, RMLED, RTS",0603,5,1k, +"R2, R41, R5, R6, R7, R8, RIGB, RLED, RRP, RTP",0603,10,10k, +"R20, R56, R57, R58, REN1, RFREQ, RFREQ2, RGS",0603,8,100k, +R21,0603,1,19.1k, +"R30, R31",0603,2,4.7k, +"R42, R55",0603,2,10k/1%, +R50,0603,1,825R/1%, +R51,0603,1,287k/1%, +"R52, R54, R60",0603,3,100k/1%, +R53,0603,1,499k/1%, +R61,0603,1,31.6k/1%, +"RB1, RB2, RB3, RB4",0603,4,330R, +"RCC1, RCC2",0603,2,5.1k, +"RCOMP, RCOMP2",0603,2,40.2k, +RDFU,0603,1,22k, +REN2,0603,1,20k, +"RG, RIG",0603,2,100R, +RS1,1206,1,8mR/1%,C7420012 +SW1,SW_PUSH_6mm,1,RESET, +SW4G,SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS,1,RESET,C2689642 +TP1,TestPoint_Pad_D1.5mm,1,CLPROG, +TP2,TestPoint_Pad_D1.5mm,1,PFO, +"U2, U7",SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm,2,MP1584EN,C15051 +U3,Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad,1,SHT40-AD1B,C2848306 +U4,SOT-563,1,TMP102,C99269 +U6,QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm,1,LTC4040EUFD,C687163 diff --git a/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_bom.csv.bak-prelcsc b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_bom.csv.bak-prelcsc new file mode 100644 index 0000000..9a2a106 --- /dev/null +++ b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_bom.csv.bak-prelcsc @@ -0,0 +1,79 @@ +Designator,Footprint,Quantity,Value,LCSC Part # +C10,CP_Elec_6.3x7.7,1,47uF/50V, +"C11, C24, C5, C7, C9, CU3, CU4",0603,7,100nF, +C22,1210,1,22uF/50V, +C23,0805,1,22uF/16V, +C3,CP_Elec_6.3x7.7,1,47uF, +"C30, C34",0805,2,10uF, +C31,0603,1,2.2uF, +"C32, C33",1210,2,47uF, +"C35, C40, C41",0805,3,22uF, +C43,CP_Elec_6.3x7.7,1,100uF/6.3V, +"CBST, CBST2",0603,2,10nF, +"CCOMP, CCOMP2",0603,2,2.2nF, +"D1, D4G, DB1, DB2, DB3, DB4",0805,6,LED, +D10,D_SMB,1,SMBJ33A, +"D2, DBK, DBK2",D_SMA,3,SS34, +D5,D_SOD-123,1,BAT54, +D6,D_SOD-123,1,1N4148W, +DZG,SOT-23,1,BZX84C15, +F1,1812,1,PPTC 3A, +H3,PinHeader_1x03_P2.54mm_Vertical,1,USART1-RSV (DNP), +J1,PinSocket_1x20_P2.54mm_Vertical,1,Blackpill-L, +J2,PinSocket_1x20_P2.54mm_Vertical,1,Blackpill-R, +J7,PinSocket_1x10_P2.00mm_Vertical,1,XBEE-ROW-1 (VCC/DOUT/DIN), +J8,PinSocket_1x10_P2.00mm_Vertical,1,XBEE-ROW-2, +J9,USB_C_Receptacle_GCT_USB4085,1,USB-C, +JP1,SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm,1,0R, +JP2,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,F2:Li-ion, +JP3,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,F1:0, +JP4,SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm,1,F0:1, +K1,Relay_SPDT_Omron_G5V-1,1,G5V-1 DC5, +L2,L_Bourns-SRU8028_8.0x8.0mm,1,10uH, +L6,L_Bourns-SRU8028_8.0x8.0mm,1,2.2uH/8A, +L7,L_Bourns-SRU8028_8.0x8.0mm,1,10uH/2A, +MH1,MountingHole_3.2mm,1,MH1_3.2mm, +"MH2, MH3, MH4",MountingHole_3.2mm,3,MountingHole_3.2mm, +MOD1,Arduino_UNO_R3,1,simpleRTK2B-Pro on UNO female headers, +P1,"TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal",1,GX16-5, +P10,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,RESET-EXT, +P11,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,CUTOFF-SW, +P12,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,NTC-HOTSPOT, +P13,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,MODO-B-UPLINK (DNP — harness alt), +P2,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,5V-IN-SD15B05, +P3,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,RTK2B-UART1 (DNP — harness alt), +P4,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,1,BATT-1S4P+NTC, +P5,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,TEMP_PROBE, +P6,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,1,FAN, +P8,JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical,1,PANEL_LED, +Q1,SOT-23,1,AO3401A, +Q10,TO-252-2,1,IRFR5305, +"Q2, Q4",SOT-23,2,AO3400A, +"Q5, Q6",SOT-23,2,MMBT3904, +Q7,SOIC-8_3.9x4.9mm_P1.27mm,1,AO4406A, +"R1, R3, R40, RMLED, RTS",0603,5,1k, +"R2, R41, R5, R6, R7, R8, RIGB, RLED, RRP, RTP",0603,10,10k, +"R20, R56, R57, R58, REN1, RFREQ, RFREQ2, RGS",0603,8,100k, +R21,0603,1,19.1k, +"R30, R31",0603,2,4.7k, +"R42, R55",0603,2,10k/1%, +R50,0603,1,825R/1%, +R51,0603,1,287k/1%, +"R52, R54, R60",0603,3,100k/1%, +R53,0603,1,499k/1%, +R61,0603,1,31.6k/1%, +"RB1, RB2, RB3, RB4",0603,4,330R, +"RCC1, RCC2",0603,2,5.1k, +"RCOMP, RCOMP2",0603,2,40.2k, +RDFU,0603,1,22k, +REN2,0603,1,20k, +"RG, RIG",0603,2,100R, +RS1,1206,1,8mR/1%, +SW1,SW_PUSH_6mm,1,RESET, +SW4G,SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS,1,RESET, +TP1,TestPoint_Pad_D1.5mm,1,CLPROG, +TP2,TestPoint_Pad_D1.5mm,1,PFO, +"U2, U7",SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm,2,MP1584EN, +U3,Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad,1,SHT40-AD1B, +U4,SOT-563,1,TMP102, +U6,QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm,1,LTC4040EUFD, diff --git a/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_designators.csv b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_designators.csv new file mode 100644 index 0000000..3bd1318 --- /dev/null +++ b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_designators.csv @@ -0,0 +1,132 @@ +C10:1 +C11:1 +C22:1 +C23:1 +C24:1 +C3:1 +C30:1 +C31:1 +C32:1 +C33:1 +C34:1 +C35:1 +C40:1 +C41:1 +C43:1 +C5:1 +C7:1 +C9:1 +CBST:1 +CBST2:1 +CCOMP:1 +CCOMP2:1 +CU3:1 +CU4:1 +D1:1 +D10:1 +D2:1 +D4G:1 +D5:1 +D6:1 +DB1:1 +DB2:1 +DB3:1 +DB4:1 +DBK:1 +DBK2:1 +DZG:1 +F1:1 +H3:1 +J1:1 +J2:1 +J7:1 +J8:1 +J9:1 +JP1:1 +JP2:1 +JP3:1 +JP4:1 +K1:1 +L2:1 +L6:1 +L7:1 +MH1:1 +MH2:1 +MH3:1 +MH4:1 +MOD1:1 +P1:1 +P10:1 +P11:1 +P12:1 +P13:1 +P2:1 +P3:1 +P4:1 +P5:1 +P6:1 +P8:1 +Q1:1 +Q10:1 +Q2:1 +Q4:1 +Q5:1 +Q6:1 +Q7:1 +R1:1 +R2:1 +R20:1 +R21:1 +R3:1 +R30:1 +R31:1 +R40:1 +R41:1 +R42:1 +R5:1 +R50:1 +R51:1 +R52:1 +R53:1 +R54:1 +R55:1 +R56:1 +R57:1 +R58:1 +R6:1 +R60:1 +R61:1 +R7:1 +R8:1 +RB1:1 +RB2:1 +RB3:1 +RB4:1 +RCC1:1 +RCC2:1 +RCOMP:1 +RCOMP2:1 +RDFU:1 +REN1:1 +REN2:1 +RFREQ:1 +RFREQ2:1 +RG:1 +RGS:1 +RIG:1 +RIGB:1 +RLED:1 +RMLED:1 +RRP:1 +RS1:1 +RTP:1 +RTS:1 +SW1:1 +SW4G:1 +TP1:1 +TP2:1 +U2:1 +U3:1 +U4:1 +U6:1 +U7:1 diff --git a/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_positions.csv b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_positions.csv new file mode 100644 index 0000000..cdfebf6 --- /dev/null +++ b/03-Architecture-Hardware/kicad/production/HBOX_v3_PROD_positions.csv @@ -0,0 +1,133 @@ +Designator,Mid X,Mid Y,Rotation,Layer +C10,89.69165,-71.8231,180.0,top +C11,162.19165,-51.2231,0.0,top +C22,161.69165,-45.2981,90.0,top +C23,179.74165,-51.2231,0.0,top +C24,118.91665,-112.3231,0.0,top +C3,154.69165,-48.5231,270.0,top +C30,100.19165,-98.3231,0.0,top +C31,112.41665,-97.3231,0.0,top +C32,120.66665,-104.3231,0.0,top +C33,126.16665,-104.3231,0.0,top +C34,130.99165,-104.3231,0.0,top +C35,130.19165,-96.3231,0.0,top +C40,179.69165,-96.3231,270.0,top +C41,198.69165,-103.2731,270.0,top +C43,185.19165,-122.3231,180.0,top +C5,92.19165,-116.3231,0.0,top +C7,96.19165,-116.3231,0.0,top +C9,101.59165,-83.3231,0.0,top +CBST,168.41665,-45.3231,0.0,top +CBST2,187.91665,-109.8231,0.0,top +CCOMP,175.84165,-53.4731,270.0,top +CCOMP2,187.96665,-114.8231,0.0,top +CU3,132.91665,-112.3231,0.0,top +CU4,136.91665,-112.3231,0.0,top +D1,100.19165,-116.3231,0.0,top +D10,91.19165,-61.8231,0.0,top +D2,94.19165,-98.3231,0.0,top +D4G,203.1,-92.1,0.0,top +D5,95.19165,-83.3231,0.0,top +D6,199.69165,-61.8231,180.0,top +DB1,194.25415,-44.3231,0.0,top +DB2,198.25415,-44.3231,0.0,top +DB3,202.25415,-44.3231,0.0,top +DB4,206.25415,-44.3231,0.0,top +DBK,168.19165,-65.8231,270.0,top +DBK2,188.49165,-103.8231,0.0,top +DZG,99.19165,-61.3231,180.0,top +F1,147.19165,-46.3231,0.0,top +H3,111.19165,-48.8631,0.0,top +J1,131.32165,-56.3231,90.0,top +J2,131.32165,-74.1031,90.0,top +J7,174.19165,-83.8231,0.0,top +J8,196.54165,-83.8231,0.0,top +J9,164.15,-131.855,0.0,top +JP1,165.54165,-80.3231,0.0,top +JP2,141.39165,-90.3231,0.0,top +JP3,141.39165,-94.8231,0.0,top +JP4,141.39165,-99.8231,0.0,top +K1,191.82415,-60.9456,0.0,top +L2,187.29165,-47.8231,0.0,top +L6,167.69165,-104.8231,0.0,top +L7,167.69165,-118.3231,0.0,top +MH1,85.19165,-45.3231,180.0,top +MH2,211.19165,-45.3231,0.0,top +MH3,85.19165,-135.3231,0.0,top +MH4,211.19165,-135.3231,0.0,top +MOD1,128.46165,-105.4531,180.0,bottom +P1,182.69165,-133.8231,0.0,top +P10,210.16665,-78.8231,90.0,top +P11,137.04165,-46.3231,0.0,top +P12,210.19165,-120.0731,90.0,top +P13,118.69165,-46.3231,0.0,top +P2,128.44165,-46.3231,0.0,top +P3,210.19165,-91.5731,90.0,top +P4,210.19165,-105.8231,90.0,top +P5,101.94165,-46.3231,0.0,top +P6,210.19165,-58.0731,90.0,top +P8,210.16665,-69.5731,90.0,top +Q1,138.65,-60.9,180.0,top +Q10,90.19165,-54.3231,0.0,top +Q2,106.19165,-96.3231,180.0,top +Q4,92.75415,-105.8231,180.0,top +Q5,145.45,-60.2,180.0,top +Q6,183.19165,-63.3231,180.0,top +Q7,112.71665,-87.2281,270.0,top +R1,163.86665,-59.3231,0.0,top +R2,167.36665,-59.3231,0.0,top +R20,173.86665,-45.3231,0.0,top +R21,177.09165,-45.3231,0.0,top +R3,97.86665,-107.3231,0.0,top +R30,124.91665,-112.3231,0.0,top +R31,128.91665,-112.3231,0.0,top +R40,178.36665,-69.3231,270.0,top +R41,178.19165,-64.8231,0.0,top +R42,114.91665,-112.3231,0.0,top +R5,92.24165,-112.3231,0.0,top +R50,112.36665,-102.3231,0.0,top +R51,104.86665,-102.3231,0.0,top +R52,108.36665,-102.3231,0.0,top +R53,134.86665,-91.3231,0.0,top +R54,134.86665,-95.3231,0.0,top +R55,101.86665,-107.3231,0.0,top +R56,105.86665,-107.3231,0.0,top +R57,134.86665,-99.8231,0.0,top +R58,134.99165,-104.3231,0.0,top +R6,98.74165,-112.3231,0.0,top +R60,179.51665,-102.3231,0.0,top +R61,179.51665,-107.3231,0.0,top +R7,102.91665,-112.3231,0.0,top +R8,106.91665,-112.3231,0.0,top +RB1,194.25415,-48.3231,0.0,top +RB2,198.25415,-48.3231,0.0,top +RB3,202.25415,-48.3231,0.0,top +RB4,206.25415,-48.3231,0.0,top +RCC1,161.425,-124.75,90.0,top +RCC2,165.4,-124.75,90.0,top +RCOMP,175.84165,-48.6231,270.0,top +RCOMP2,179.69165,-116.3231,0.0,top +RDFU,110.91665,-112.3231,0.0,top +REN1,174.19165,-59.3231,0.0,top +REN2,178.19165,-59.3231,0.0,top +RFREQ,161.13595,-55.5552,90.0,top +RFREQ2,179.51665,-111.8231,0.0,top +RG,94.19165,-94.3231,0.0,top +RGS,99.19165,-94.3231,0.0,top +RIG,101.36665,-69.3231,180.0,top +RIGB,101.36665,-74.3231,180.0,top +RLED,95.41665,-112.3231,0.0,top +RMLED,203.05,-84.45,0.0,top +RRP,85.19165,-61.3231,0.0,top +RS1,100.19165,-88.3231,0.0,top +RTP,100.86665,-102.3231,0.0,top +RTS,96.86665,-102.3231,0.0,top +SW1,202.44165,-135.5731,0.0,top +SW4G,148.175,-135.6,0.0,top +TP1,113.19165,-107.3231,0.0,top +TP2,127.69165,-87.3231,0.0,top +U2,169.21665,-52.7281,90.0,top +U3,124.19165,-118.3231,0.0,top +U4,130.19165,-118.3231,0.0,top +U6,121.74165,-94.3231,90.0,top +U7,197.62165,-112.5731,90.0,top diff --git a/03-Architecture-Hardware/kicad/production/netlist.ipc b/03-Architecture-Hardware/kicad/production/netlist.ipc new file mode 100644 index 0000000..6263d66 --- /dev/null +++ b/03-Architecture-Hardware/kicad/production/netlist.ipc @@ -0,0 +1,683 @@ +P CODE 00 +P UNITS CUST 0 +P arrayDim N +317/GATE_LS VIA MD0118PA00X+063265Y-023497X0236Y0000R000S3 +317/GATE_LS VIA MD0118PA00X+060925Y-024950X0236Y0000R000S3 +317USART1_RX VIA MD0118PA00X+065370Y-029893X0236Y0000R000S3 +317USART1_RX VIA MD0118PA00X+050618Y-036394X0236Y0000R000S3 +317USART1_RX VIA MD0118PA00X+043613Y-043913X0236Y0000R000S3 +317/DIN_4G VIA MD0118PA00X+063103Y-023994X0236Y0000R000S3 +317/DIN_4G VIA MD0118PA00X+064304Y-030644X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+065213Y-021958X0236Y0000R000S3 +317GND VIA MD0118PA00X+054190Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+040410Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+040410Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+054190Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+076654Y-041693X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+075335Y-045197X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-038493X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-038493X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+051434Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+049764Y-037559X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-024714X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+040394Y-039035X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+056946Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-041249X0236Y0000R000S3 +317GND VIA MD0118PA00X+056946Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-035737X0236Y0000R000S3 +317GND VIA MD0118PA00X+040410Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+059701Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+054190Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-032982X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+076829Y-043570X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-024714X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+051434Y-027470X0236Y0000R000S3 +317GND VIA MD0118PA00X+039094Y-045157X0236Y0000R000S3 +317GND VIA MD0118PA00X+070046Y-017844X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+048678Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+054409Y-036102X0236Y0000R000S3 +317GND VIA MD0118PA00X+054190Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-032982X0236Y0000R000S3 +317GND VIA MD0118PA00X+048678Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+056946Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+065213Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+051434Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-041249X0236Y0000R000S3 +317GND VIA MD0118PA00X+048678Y-032982X0236Y0000R000S3 +317GND VIA MD0118PA00X+051260Y-039252X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+048678Y-027470X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-041249X0236Y0000R000S3 +317GND VIA MD0118PA00X+073760Y-024782X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+034488Y-023130X0236Y0000R000S3 +317GND VIA MD0118PA00X+056946Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+051260Y-041732X0236Y0000R000S3 +317GND VIA MD0118PA00X+051434Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-024714X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-038493X0236Y0000R000S3 +317GND VIA MD0118PA00X+045922Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-035737X0236Y0000R000S3 +317GND VIA MD0118PA00X+037402Y-045098X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-032982X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+059701Y-041249X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-027470X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-035737X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-027470X0236Y0000R000S3 +317GND VIA MD0118PA00X+059701Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-038493X0236Y0000R000S3 +317GND VIA MD0118PA00X+059701Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+053150Y-038268X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-027470X0236Y0000R000S3 +317GND VIA MD0118PA00X+043166Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+065213Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+062457Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+040410Y-019202X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-016446X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-021958X0236Y0000R000S3 +317GND VIA MD0118PA00X+065213Y-027470X0236Y0000R000S3 +317GND VIA MD0118PA00X+037654Y-044005X0236Y0000R000S3 +317GND VIA MD0118PA00X+034898Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+048678Y-052273X0236Y0000R000S3 +317GND VIA MD0118PA00X+050079Y-046693X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-035737X0236Y0000R000S3 +317GND VIA MD0118PA00X+059701Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+048678Y-030226X0236Y0000R000S3 +317GND VIA MD0118PA00X+032142Y-049517X0236Y0000R000S3 +317GND VIA MD0118PA00X+040020Y-033661X0236Y0000R000S3 +317GND VIA MD0118PA00X+056946Y-046761X0236Y0000R000S3 +317GND VIA MD0118PA00X+039377Y-037135X0236Y0000R000S3 +317IGN_SENSE VIA MD0118PA00X+038645Y-030736X0236Y0000R000S3 +317IGN_SENSE VIA MD0118PA00X+038524Y-032600X0236Y0000R000S3 +317IGN_SENSE VIA MD0118PA00X+039512Y-033200X0236Y0000R000S3 +317IGN_SENSE VIA MD0118PA00X+047520Y-026634X0236Y0000R000S3 +317SW_FAN VIA MD0118PA00X+065624Y-025127X0236Y0000R000S3 +317SW_FAN VIA MD0118PA00X+067052Y-021796X0236Y0000R000S3 +317/5V_FAN VIA MD0118PA00X+070710Y-019620X0236Y0000R000S3 +317/5V_FAN VIA MD0118PA00X+075012Y-019705X0236Y0000R000S3 +317/FAN_RET VIA MD0118PA00X+042785Y-037944X0236Y0000R000S3 +317/FAN_RET VIA MD0118PA00X+060912Y-036756X0236Y0000R000S3 +317/FAN_RET VIA MD0118PA00X+040390Y-039455X0236Y0000R000S3 +317FAN_TACH_RAW VIA MD0118PA00X+039163Y-040729X0236Y0000R000S3 +317FAN_TACH_RAW VIA MD0118PA00X+069167Y-038764X0236Y0000R000S3 +317/EN_FAN VIA MD0118PA00X+068270Y-021002X0236Y0000R000S3 +317/EN_FAN VIA MD0118PA00X+068646Y-023707X0236Y0000R000S3 +317/BAT_PLUS VIA MD0157PA00X+047001Y-035206X0315Y0000R000S3 +317/BAT_PLUS VIA MD0157PA00X+049930Y-035127X0315Y0000R000S3 +317/BAT_PLUS VIA MD0118PA00X+036754Y-043144X0236Y0000R000S3 +317/BAT_PLUS VIA MD0118PA00X+045997Y-043102X0236Y0000R000S3 +317/NTC VIA MD0118PA00X+049422Y-037056X0236Y0000R000S3 +317/NTC VIA MD0118PA00X+045568Y-041494X0236Y0000R000S3 +317/NRST VIA MD0118PA00X+048895Y-022628X0236Y0000R000S3 +317/SW3_NODE VIA MD0118PA00X+074288Y-042369X0236Y0000R000S3 +317/SW3_NODE VIA MD0118PA00X+073660Y-045680X0236Y0000R000S3 +317/SW_5V VIA MD0118PA00X+067622Y-038461X0236Y0000R000S3 +317/SW_5V VIA MD0157PA00X+079587Y-044564X0315Y0000R000S3 +317/SW_5V VIA MD0118PA00X+067566Y-044676X0236Y0000R000S3 +317/SW_5V VIA MD0118PA00X+061732Y-025157X0236Y0000R000S3 +317/FB3 VIA MD0118PA00X+074279Y-040285X0236Y0000R000S3 +317/FB3 VIA MD0118PA00X+077516Y-043521X0236Y0000R000S3 +317/FB3 VIA MD0118PA00X+071447Y-043110X0236Y0000R000S3 +317/BST3 VIA MD0118PA00X+073678Y-042408X0236Y0000R000S3 +317/BST3 VIA MD0118PA00X+075975Y-045178X0236Y0000R000S3 +317/BAT_SENSE VIA MD0118PA00X+036299Y-026654X0236Y0000R000S3 +317/BAT_SENSE VIA MD0118PA00X+036259Y-042945X0236Y0000R000S3 +317/PWR_CTRL VIA MD0118PA00X+063639Y-024241X0236Y0000R000S3 +317/5V_SENSE VIA MD0118PA00X+037102Y-027721X0236Y0000R000S3 +317/5V_SENSE VIA MD0118PA00X+042060Y-043930X0236Y0000R000S3 +317FAN_PWM VIA MD0118PA00X+037985Y-028412X0236Y0000R000S3 +317FAN_PWM VIA MD0118PA00X+036759Y-036747X0236Y0000R000S3 +317EXT_LED VIA MD0118PA00X+036949Y-027283X0236Y0000R000S3 +317EXT_LED VIA MD0118PA00X+035865Y-040968X0236Y0000R000S3 +317/NTC_TEMP VIA MD0118PA00X+064724Y-042815X0236Y0000R000S3 +317/NTC_TEMP VIA MD0118PA00X+066826Y-044916X0236Y0000R000S3 +317FAN_TACH VIA MD0118PA00X+058134Y-027183X0236Y0000R000S3 +317FAN_TACH VIA MD0118PA00X+038044Y-030973X0236Y0000R000S3 +317FAN_TACH VIA MD0118PA00X+038730Y-039849X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+052950Y-038906X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+037067Y-033229X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+039026Y-040285X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+052531Y-040782X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+060258Y-038189X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+052024Y-043826X0236Y0000R000S3 +3173V3 VIA MD0118PA00X+037238Y-018237X0236Y0000R000S3 +317/COMP3_C VIA MD0118PA00X+072934Y-045132X0236Y0000R000S3 +317/COMP3_C VIA MD0118PA00X+072875Y-045981X0236Y0000R000S3 +317/MAIN5V VIA MD0118PA00X+049468Y-036206X0236Y0000R000S3 +317/MAIN5V VIA MD0118PA00X+046466Y-036145X0236Y0000R000S3 +317/MAIN5V VIA MD0118PA00X+039967Y-030386X0236Y0000R000S3 +317/SW_IN VIA MD0118PA00X+060472Y-025276X0236Y0000R000S3 +317/SW_IN VIA MD0118PA00X+053346Y-024114X0236Y0000R000S3 +317/SW_IN VIA MD0118PA00X+059928Y-020295X0236Y0000R000S3 +317/SW_IN VIA MD0118PA00X+055965Y-023996X0236Y0000R000S3 +317FAN_GATE VIA MD0118PA00X+039166Y-036753X0236Y0000R000S3 +317FAN_GATE VIA MD0118PA00X+040520Y-037584X0236Y0000R000S3 +317/IGATE VIA MD0118PA00X+049272Y-037399X0236Y0000R000S3 +317/IGATE VIA MD0118PA00X+044511Y-035974X0236Y0000R000S3 +317/I2C_SDA VIA MD0118PA00X+049848Y-043982X0236Y0000R000S3 +317/I2C_SDA VIA MD0118PA00X+040148Y-029719X0236Y0000R000S3 +317/I2C_SDA VIA MD0118PA00X+050262Y-036394X0236Y0000R000S3 +317/MODEM_LED VIA MD0118PA00X+078287Y-034961X0236Y0000R000S3 +317/MODEM_LED VIA MD0118PA00X+078760Y-033248X0236Y0000R000S3 +317/MODEM_LED_A VIA MD0118PA00X+080276Y-033878X0236Y0000R000S3 +317/MODEM_LED_A VIA MD0118PA00X+080276Y-035276X0236Y0000R000S3 +317/I2C_SCL VIA MD0118PA00X+049856Y-044626X0236Y0000R000S3 +317/I2C_SCL VIA MD0118PA00X+045180Y-019047X0236Y0000R000S3 +317/I2C_SCL VIA MD0118PA00X+051025Y-036402X0236Y0000R000S3 +317/I2C_SCL VIA MD0118PA00X+054064Y-035036X0236Y0000R000S3 +317/3V3_MODEM VIA MD0118PA00X+076319Y-034193X0236Y0000R000S3 +317/3V3_MODEM VIA MD0118PA00X+075157Y-035059X0236Y0000R000S3 +317/3V3_MODEM VIA MD0118PA00X+069318Y-040960X0236Y0000R000S3 +317/3V3_MODEM VIA MD0118PA00X+082500Y-044783X0236Y0000R000S3 +317/MODEM_RST VIA MD0118PA00X+055866Y-053386X0236Y0000R000S3 +317/USB_VBUS VIA MD0118PA00X+066083Y-033346X0236Y0000R000S3 +317/VEH5V VIA MD0118PA00X+046438Y-037324X0236Y0000R000S3 +317/VEH5V VIA MD0118PA00X+049091Y-037127X0236Y0000R000S3 +317/VEH5V VIA MD0118PA00X+065669Y-031114X0236Y0000R000S3 +317/VEH5V VIA MD0118PA00X+040502Y-031781X0236Y0000R000S3 +317/LED_A VIA MD0118PA00X+069830Y-042294X0236Y0000R000S3 +317/LED_A VIA MD0118PA00X+039791Y-045311X0236Y0000R000S3 +317/LED_A VIA MD0118PA00X+039287Y-042294X0236Y0000R000S3 +317/24V_IN VIA MD0118PA00X+035855Y-024425X0236Y0000R000S3 +317/BASE_LS VIA MD0118PA00X+064764Y-023750X0236Y0000R000S3 +317/BASE_LS VIA MD0118PA00X+061245Y-024079X0236Y0000R000S3 +317/FB_FAN VIA MD0118PA00X+069900Y-018229X0236Y0000R000S3 +317/FB_FAN VIA MD0118PA00X+068257Y-019603X0236Y0000R000S3 +317BST_FAN VIA MD0118PA00X+066297Y-018140X0236Y0000R000S3 +317BST_FAN VIA MD0118PA00X+065646Y-021827X0236Y0000R000S3 +317/SW_BAT VIA MD0118PA00X+064488Y-036161X0236Y0000R000S3 +317/SW_BAT VIA MD0118PA00X+051701Y-032891X0236Y0000R000S3 +317/BATLED3 VIA MD0118PA00X+065562Y-029630X0236Y0000R000S3 +317/BATLED3 VIA MD0118PA00X+078743Y-019092X0236Y0000R000S3 +317/CLPROG_TP VIA MD0118PA00X+045136Y-037087X0236Y0000R000S3 +317/CLPROG_TP VIA MD0118PA00X+044564Y-041750X0236Y0000R000S3 +317/BATLED4 VIA MD0118PA00X+066863Y-025826X0236Y0000R000S3 +317/BATLED4 VIA MD0118PA00X+072301Y-020315X0236Y0000R000S3 +317/F0_SEL VIA MD0118PA00X+055804Y-038807X0236Y0000R000S3 +317/F0_SEL VIA MD0118PA00X+049146Y-037769X0236Y0000R000S3 +317/LED_K VIA MD0118PA00X+068483Y-042533X0236Y0000R000S3 +317/LED_K VIA MD0118PA00X+043689Y-044531X0236Y0000R000S3 +317/BATLED2 VIA MD0118PA00X+077172Y-019224X0236Y0000R000S3 +317/BATLED2 VIA MD0118PA00X+071533Y-024001X0236Y0000R000S3 +317/USB_CC2 VIA MD0118PA00X+065945Y-049449X0236Y0000R000S3 +317IGN_IN VIA MD0118PA00X+041081Y-028018X0236Y0000R000S3 +317/PFI VIA MD0118PA00X+048840Y-035956X0236Y0000R000S3 +317/PFI VIA MD0118PA00X+040680Y-033158X0236Y0000R000S3 +317/PFI VIA MD0118PA00X+041931Y-038282X0236Y0000R000S3 +317/PFI VIA MD0118PA00X+042384Y-032405X0236Y0000R000S3 +317/BATLED1 VIA MD0118PA00X+074631Y-020078X0236Y0000R000S3 +317/BATLED1 VIA MD0118PA00X+064636Y-025580X0236Y0000R000S3 +317/CHRG_EN VIA MD0118PA00X+038615Y-029178X0236Y0000R000S3 +317/CHRG_EN VIA MD0118PA00X+045996Y-037180X0236Y0000R000S3 +317/CHRG_EN VIA MD0118PA00X+041528Y-041865X0236Y0000R000S3 +317/CHRG_STAT VIA MD0118PA00X+053241Y-038588X0236Y0000R000S3 +317/CHRG_STAT VIA MD0118PA00X+049868Y-038614X0236Y0000R000S3 +317/CHRG_STAT VIA MD0118PA00X+055332Y-036409X0236Y0000R000S3 +317/CHRG_FAULT VIA MD0118PA00X+056855Y-038016X0236Y0000R000S3 +317/CHRG_FAULT VIA MD0118PA00X+050200Y-037499X0236Y0000R000S3 +317/PROG VIA MD0118PA00X+044843Y-040596X0236Y0000R000S3 +317/PROG VIA MD0118PA00X+044693Y-037177X0236Y0000R000S3 +317/VFB_BST VIA MD0118PA00X+052850Y-038268X0236Y0000R000S3 +317/VFB_BST VIA MD0118PA00X+051357Y-036538X0236Y0000R000S3 +317/VFB_BST VIA MD0118PA00X+048033Y-038485X0236Y0000R000S3 +317/F2_SEL VIA MD0118PA00X+048576Y-038011X0236Y0000R000S3 +317/F2_SEL VIA MD0118PA00X+053809Y-037596X0236Y0000R000S3 +317/F1_SEL VIA MD0118PA00X+054384Y-038373X0236Y0000R000S3 +317/F1_SEL VIA MD0118PA00X+050127Y-038131X0236Y0000R000S3 +327/GATE_LS R2 -1 A01X+065568Y-023356X0315Y0374R000S2 +327/SYS5V R2 -2 A01X+066217Y-023356X0315Y0374R000S2 +317USART1_RX P13 -1 D0374PA00X+045745Y-018237X0669Y0768R000S0 +317/DIN_4G P13 -2 D0374PA00X+046729Y-018237X0669Y0768R000S0 +317GND P13 -3 D0374PA00X+047713Y-018237X0669Y0768R000S0 +327IGN_SENSE Rigb -1 A01X+040233Y-029261X0315Y0374R180S2 +327GND Rigb -2 A01X+039583Y-029261X0315Y0374R180S2 +327SW_FAN Dbk -1 A01X+066217Y-025127X0984Y0709R090S2 +327GND Dbk -2 A01X+066217Y-026702X0984Y0709R090S2 +317/5V_FAN P6 -1 D0374PA00X+082753Y-024340X0669Y0768R090S0 +317/FAN_RET P6 -2 D0374PA00X+082753Y-023356X0669Y0768R090S0 +317GND P6 -3 D0374PA00X+082753Y-022371X0669Y0768R090S0 +317FAN_TACH_RAW P6 -4 D0374PA00X+082753Y-021387X0669Y0768R090S0 +327/EN_FAN Ren2 -1 A01X+069829Y-023356X0315Y0374R000S2 +327GND Ren2 -2 A01X+070479Y-023356X0315Y0374R000S2 +327GND DB2 -1 A01X+077684Y-017450X0384Y0551R000S2 +327/BLED2 DB2 -2 A01X+078422Y-017450X0384Y0551R000S2 +317/BAT_PLUS P4 -1 D0374PA00X+082753Y-042647X0669Y0768R270S0 +317GND P4 -2 D0374PA00X+082753Y-041663X0669Y0768R270S0 +317/NTC P4 -3 D0374PA00X+082753Y-040678X0669Y0768R270S0 +317/NRST P10 -1 D0394PA00X+082743Y-031525X0669Y0787R090S0 +317GND P10 -2 D0394PA00X+082743Y-030541X0669Y0787R090S0 +327CC_FAN Ccomp -1 A01X+069229Y-020747X0354Y0374R090S2 +327GND Ccomp -2 A01X+069229Y-021358X0354Y0374R090S2 +327/SW3_NODE U7 -1 A01X+078778Y-045070X0768Y0236R180S2 +327/SW_5V U7 -2 A01X+078778Y-044570X0768Y0236R180S2 +327/COMP3 U7 -3 A01X+078778Y-044070X0768Y0236R180S2 +327/FB3 U7 -4 A01X+078778Y-043570X0768Y0236R180S2 +327GND U7 -5 A01X+076829Y-043570X0768Y0236R180S2 +327/FREQ3 U7 -6 A01X+076829Y-044070X0768Y0236R180S2 +327/SW_5V U7 -7 A01X+076829Y-044570X0768Y0236R180S2 +327/BST3 U7 -8 A01X+076829Y-045070X0768Y0236R180S2 +327GND U7 -9 A01X+077804Y-044320X0902Y1181R180S2 +327GND DB1 -1 A01X+076109Y-017450X0384Y0551R000S2 +327/BLED1 DB1 -2 A01X+076847Y-017450X0384Y0551R000S2 +317J1-PIN_1-PAD1) J1 -1 D0394PA00X+042201Y-022174X0669Y0669R270S0 +317J1-PIN_2-PAD2) J1 -2 D0394PA00X+043201Y-022174X0669Y0000R270S0 +317J1-PIN_3-PAD3) J1 -3 D0394PA00X+044201Y-022174X0669Y0000R270S0 +317J1-PIN_4-PAD4) J1 -4 D0394PA00X+045201Y-022174X0669Y0000R270S0 +317/NRST J1 -5 D0394PA00X+046201Y-022174X0669Y0000R270S0 +317/BAT_SENSE J1 -6 D0394PA00X+047201Y-022174X0669Y0000R270S0 +317/PWR_CTRL J1 -7 D0394PA00X+048201Y-022174X0669Y0000R270S0 +317/GNSS_TX J1 -8 D0394PA00X+049201Y-022174X0669Y0000R270S0 +317/GNSS_RX J1 -9 D0394PA00X+050201Y-022174X0669Y0000R270S0 +317/5V_SENSE J1 -10 D0394PA00X+051201Y-022174X0669Y0000R270S0 +317IGN_SENSE J1 -11 D0394PA00X+052201Y-022174X0669Y0000R270S0 +317FAN_PWM J1 -12 D0394PA00X+053201Y-022174X0669Y0000R270S0 +317-PIN_13-PAD13) J1 -13 D0394PA00X+054201Y-022174X0669Y0000R270S0 +317EXT_LED J1 -14 D0394PA00X+055201Y-022174X0669Y0000R270S0 +317/NTC_TEMP J1 -15 D0394PA00X+056201Y-022174X0669Y0000R270S0 +317-PIN_16-PAD16) J1 -16 D0394PA00X+057201Y-022174X0669Y0000R270S0 +317FAN_TACH J1 -17 D0394PA00X+058201Y-022174X0669Y0000R270S0 +3173V3 J1 -18 D0394PA00X+059201Y-022174X0669Y0000R270S0 +317GND J1 -19 D0394PA00X+060201Y-022174X0669Y0000R270S0 +317/SYS5V J1 -20 D0394PA00X+061201Y-022174X0669Y0000R270S0 +327/COMP3_C Ccomp2-1 A01X+073698Y-045206X0354Y0374R000S2 +327GND Ccomp2-2 A01X+074308Y-045206X0354Y0374R000S2 +327/BAT_PLUS R5 -1 A01X+035991Y-044222X0315Y0374R000S2 +327/BAT_SENSE R5 -2 A01X+036640Y-044222X0315Y0374R000S2 +317/MAIN5V P11 -1 D0394PA00X+053461Y-018237X0669Y0787R000S0 +317/SYS5V P11 -2 D0394PA00X+054446Y-018237X0669Y0787R000S0 +327/GATE_LS Q1 -1 A01X+054218Y-023602X0581Y0236R000S2 +327/SW_IN Q1 -2 A01X+054218Y-024350X0581Y0236R000S2 +327/SW_5V Q1 -3 A01X+054956Y-023976X0581Y0236R000S2 +327FAN_PWM Rg -1 A01X+036759Y-037135X0315Y0374R000S2 +327FAN_GATE Rg -2 A01X+037408Y-037135X0315Y0374R000S2 +327/MAIN5V Q7 -1 A01X+043402Y-033592X0768Y0236R000S2 +327/MAIN5V Q7 -2 A01X+043402Y-034092X0768Y0236R000S2 +327/MAIN5V Q7 -3 A01X+043402Y-034592X0768Y0236R000S2 +327/IGATE Q7 -4 A01X+043402Y-035092X0768Y0236R000S2 +327/VIN_SW Q7 -5 A01X+045351Y-035092X0768Y0236R000S2 +327/VIN_SW Q7 -6 A01X+045351Y-034592X0768Y0236R000S2 +327/VIN_SW Q7 -7 A01X+045351Y-034092X0768Y0236R000S2 +327/VIN_SW Q7 -8 A01X+045351Y-033592X0768Y0236R000S2 +327/MAIN5V C34 -1 A01X+051198Y-041072X0394Y0571R000S2 +327GND C34 -2 A01X+051946Y-041072X0394Y0571R000S2 +3273V3 R31 -1 A01X+050430Y-044222X0315Y0374R000S2 +327/I2C_SDA R31 -2 A01X+051079Y-044222X0315Y0374R000S2 +327/FREQ3 Rfreq2-1 A01X+070351Y-044025X0315Y0374R000S2 +327GND Rfreq2-2 A01X+071001Y-044025X0315Y0374R000S2 +327/MODEM_LED Rmled -1 A01X+079616Y-033248X0315Y0374R000S2 +327/MODEM_LED_A Rmled -2 A01X+080266Y-033248X0315Y0374R000S2 +327/I2C_SDA U3 -1 A01X+048619Y-046426X0197Y0118R000S2 +327/I2C_SCL U3 -2 A01X+048619Y-046741X0197Y0118R000S2 +3273V3 U3 -3 A01X+049170Y-046741X0197Y0118R000S2 +327GND U3 -4 A01X+049170Y-046426X0197Y0118R000S2 +327/SW_5V C40 -1 A01X+070745Y-037548X0394Y0571R090S2 +327GND C40 -2 A01X+070745Y-038296X0394Y0571R090S2 +317/3V3_MODEM J7 -1 D0315PA00X+068579Y-029458X0531Y0531R000S0 +317/DOUT_4G J7 -2 D0315PA00X+068579Y-030245X0531Y0000R000S0 +317/DIN_4G J7 -3 D0315PA00X+068579Y-031033X0531Y0000R000S0 +317GND J7 -4 D0315PA00X+068579Y-031820X0531Y0000R000S0 +317/MODEM_RST J7 -5 D0315PA00X+068579Y-032608X0531Y0000R000S0 +317/USB_VBUS J7 -6 D0315PA00X+068579Y-033395X0531Y0000R000S0 +317/USB_DP J7 -7 D0315PA00X+068579Y-034182X0531Y0000R000S0 +317/USB_DM J7 -8 D0315PA00X+068579Y-034970X0531Y0000R000S0 +317J7-PIN_9-PAD9) J7 -9 D0315PA00X+068579Y-035757X0531Y0000R000S0 +317GND J7 -10 D0315PA00X+068579Y-036545X0531Y0000R000S0 +327/5V_FAN D2 -1 A01X+036296Y-038710X0984Y0709R000S2 +327/FAN_RET D2 -2 A01X+037871Y-038710X0984Y0709R000S2 +327/VEH5V RS1 -1 A01X+038870Y-034773X0443Y0689R000S2 +327/VIN_SW RS1 -2 A01X+040021Y-034773X0443Y0689R000S2 +3273V3 Cu3 -1 A01X+052024Y-044222X0354Y0374R000S2 +327GND Cu3 -2 A01X+052635Y-044222X0354Y0374R000S2 +3273V3 R3 -1 A01X+038205Y-042253X0315Y0374R000S2 +327/LED_A R3 -2 A01X+038855Y-042253X0315Y0374R000S2 +327/3V3_MODEM R60 -1 A01X+070351Y-040285X0315Y0374R000S2 +327/FB3 R60 -2 A01X+071001Y-040285X0315Y0374R000S2 +327USART1_RX Rdfu -1 A01X+043343Y-044222X0315Y0374R000S2 +3273V3 Rdfu -2 A01X+043993Y-044222X0315Y0374R000S2 +327/24V_IN D10 -1 A01X+035056Y-024340X0984Y0906R000S2 +327GND D10 -2 A01X+036749Y-024340X0984Y0906R000S2 +327COMP_FAN Rcomp -1 A01X+069229Y-018818X0315Y0374R090S2 +327CC_FAN Rcomp -2 A01X+069229Y-019468X0315Y0374R090S2 +327/BASE_LS Q5 -1 A01X+056895Y-023327X0581Y0236R000S2 +327/GATE_LS Q5 -2 A01X+056895Y-024075X0581Y0236R000S2 +327GND Q5 -3 A01X+057633Y-023701X0581Y0236R000S2 +327/5V_SENSE C7 -1 A01X+037566Y-045796X0354Y0374R000S2 +327GND C7 -2 A01X+038176Y-045796X0354Y0374R000S2 +317/VEH5V P2 -1 D0394PA00X+050075Y-018237X0669Y0787R000S0 +317GND P2 -2 D0394PA00X+051060Y-018237X0669Y0787R000S0 +327/5V_FAN R20 -1 A01X+068127Y-017844X0315Y0374R000S2 +327/FB_FAN R20 -2 A01X+068776Y-017844X0315Y0374R000S2 +327/BST3 Cbst2 -1 A01X+073678Y-043237X0354Y0374R000S2 +327/SW3_NODE Cbst2 -2 A01X+074288Y-043237X0354Y0374R000S2 +327FAN_TACH_RAW Rts -1 A01X+037812Y-040285X0315Y0374R000S2 +327FAN_TACH Rts -2 A01X+038461Y-040285X0315Y0374R000S2 +327FAN_GATE Q2 -1 A01X+041439Y-037548X0581Y0236R000S2 +327GND Q2 -2 A01X+041439Y-038296X0581Y0236R000S2 +327/FAN_RET Q2 -3 A01X+042177Y-037922X0581Y0236R000S2 +327BST_FAN Cbst -1 A01X+066001Y-017844X0354Y0374R000S2 +327SW_FAN Cbst -2 A01X+066611Y-017844X0354Y0374R000S2 +317/USART1_TX H3 -1 D0394PA00X+043776Y-018237X0669Y0669R000S0 +317USART1_RX H3 -2 D0394PA00X+043776Y-019237X0669Y0000R000S0 +317GND H3 -3 D0394PA00X+043776Y-020237X0669Y0000R000S0 +327/SW_BAT L6 -1 A01X+064485Y-041269X0787Y1260R000S2 +327/BAT_PLUS L6 -2 A01X+067556Y-041269X0787Y1260R000S2 +327/BAT_PLUS C35 -1 A01X+050883Y-037922X0394Y0571R000S2 +327GND C35 -2 A01X+051631Y-037922X0394Y0571R000S2 +327/I2C_SCL U4 -1 A01X+050976Y-046387X0266Y0138R000S2 +327GND U4 -2 A01X+050976Y-046584X0266Y0138R000S2 +327U4-ALERT-PAD3) U4 -3 A01X+050976Y-046781X0266Y0138R000S2 +327GND U4 -4 A01X+051537Y-046781X0266Y0138R000S2 +3273V3 U4 -5 A01X+051537Y-046584X0266Y0138R000S2 +327/I2C_SDA U4 -6 A01X+051537Y-046387X0266Y0138R000S2 +327/BATLED3 RB3 -1 A01X+079303Y-019025X0315Y0374R000S2 +327/BLED3 RB3 -2 A01X+079952Y-019025X0315Y0374R000S2 +327/CLPROG_TP TP1 -1 A01X+044564Y-042253X0591Y0000R000S2 +327SW_FAN L2 -1 A01X+072201Y-018828X0787Y1260R000S2 +327/5V_FAN L2 -2 A01X+075272Y-018828X0787Y1260R000S2 +327IGN_SENSE C9 -1 A01X+039692Y-032804X0354Y0374R000S2 +327GND C9 -2 A01X+040302Y-032804X0354Y0374R000S2 +327/MODEM_RST SW4G -1 A01X+056811Y-053386X0492Y0394R000S2 +327GND SW4G -2 A01X+059862Y-053386X0492Y0394R000S2 +317GND J8 -1 D0315PA00X+077379Y-029458X0531Y0531R000S0 +317J8-PIN_2-PAD2) J8 -2 D0315PA00X+077379Y-030245X0531Y0000R000S0 +317J8-PIN_3-PAD3) J8 -3 D0315PA00X+077379Y-031033X0531Y0000R000S0 +317J8-PIN_4-PAD4) J8 -4 D0315PA00X+077379Y-031820X0531Y0000R000S0 +317J8-PIN_5-PAD5) J8 -5 D0315PA00X+077379Y-032608X0531Y0000R000S0 +317GND J8 -6 D0315PA00X+077379Y-033395X0531Y0000R000S0 +317/3V3_MODEM J8 -7 D0315PA00X+077379Y-034182X0531Y0000R000S0 +317/MODEM_LED J8 -8 D0315PA00X+077379Y-034970X0531Y0000R000S0 +317J8-PIN_9-PAD9) J8 -9 D0315PA00X+077379Y-035757X0531Y0000R000S0 +317GND J8 -10 D0315PA00X+077379Y-036545X0531Y0000R000S0 +327SW_FAN U2 -1 A01X+067595Y-021509X0768Y0236R180S2 +327/EN_FAN U2 -2 A01X+067595Y-021009X0768Y0236R180S2 +327COMP_FAN U2 -3 A01X+067595Y-020509X0768Y0236R180S2 +327/FB_FAN U2 -4 A01X+067595Y-020009X0768Y0236R180S2 +327GND U2 -5 A01X+065646Y-020009X0768Y0236R180S2 +327FREQ_FAN U2 -6 A01X+065646Y-020509X0768Y0236R180S2 +32724V U2 -7 A01X+065646Y-021009X0768Y0236R180S2 +327BST_FAN U2 -8 A01X+065646Y-021509X0768Y0236R180S2 +327GND U2 -9 A01X+066621Y-020759X0902Y1181R180S2 +327/BATLED4 RB4 -1 A01X+080878Y-019025X0315Y0374R000S2 +327/BLED4 RB4 -2 A01X+081527Y-019025X0315Y0374R000S2 +32724V C22 -1 A01X+063658Y-018415X0453Y1063R270S2 +327GND C22 -2 A01X+063658Y-017253X0453Y1063R270S2 +327/FB3 R61 -1 A01X+070351Y-042253X0315Y0374R000S2 +327GND R61 -2 A01X+071001Y-042253X0315Y0374R000S2 +327/USB_CC1 Rcc1 -1 A01X+063553Y-049439X0315Y0374R270S2 +327GND Rcc1 -2 A01X+063553Y-048789X0315Y0374R270S2 +327/PWR_CTRL R1 -1 A01X+064190Y-023356X0315Y0374R000S2 +327/BASE_LS R1 -2 A01X+064839Y-023356X0315Y0374R000S2 +3173V3 P5 -1 D0374PA00X+038658Y-018237X0669Y0768R000S0 +317GND P5 -2 D0374PA00X+039642Y-018237X0669Y0768R000S0 +317/I2C_SDA P5 -3 D0374PA00X+040627Y-018237X0669Y0768R000S0 +317/I2C_SCL P5 -4 D0374PA00X+041611Y-018237X0669Y0768R000S0 +327GND DB3 -1 A01X+079259Y-017450X0384Y0551R000S2 +327/BLED3 DB3 -2 A01X+079997Y-017450X0384Y0551R000S2 +327/3V3_MODEM C41 -1 A01X+078225Y-040285X0394Y0571R090S2 +327GND C41 -2 A01X+078225Y-041033X0394Y0571R090S2 +327/VEH5V R55 -1 A01X+039780Y-042253X0315Y0374R000S2 +327/NTC R55 -2 A01X+040430Y-042253X0315Y0374R000S2 +327EXT_LED Rled -1 A01X+037241Y-044222X0315Y0374R000S2 +327GND Rled -2 A01X+037890Y-044222X0315Y0374R000S2 +327/MAIN5V JP4 -1 A01X+055154Y-039300X0394Y0197R000S2 +327/F0_SEL JP4 -2 A01X+055666Y-039300X0394Y0591R000S2 +327GND JP4 -3 A01X+056178Y-039300X0394Y0197R000S2 +327FAN_GATE Rgs -1 A01X+038727Y-037135X0315Y0374R000S2 +327GND Rgs -2 A01X+039377Y-037135X0315Y0374R000S2 +317/LED_A P8 -1 D0394PA00X+082743Y-027883X0669Y0787R090S0 +317/LED_K P8 -2 D0394PA00X+082743Y-026899X0669Y0787R090S0 +327/Q6_BASE R41 -1 A01X+069829Y-025521X0315Y0374R000S2 +327GND R41 -2 A01X+070479Y-025521X0315Y0374R000S2 +327GND DB4 -1 A01X+080833Y-017450X0384Y0551R000S2 +327/BLED4 DB4 -2 A01X+081572Y-017450X0384Y0551R000S2 +327/BATLED2 RB2 -1 A01X+077728Y-019025X0315Y0374R000S2 +327/BLED2 RB2 -2 A01X+078378Y-019025X0315Y0374R000S2 +327/USB_CC2 Rcc2 -1 A01X+065118Y-049439X0315Y0374R270S2 +327GND Rcc2 -2 A01X+065118Y-048789X0315Y0374R270S2 +327/LED_K D1 -1 A01X+039076Y-045796X0384Y0551R000S2 +327/LED_A D1 -2 A01X+039815Y-045796X0384Y0551R000S2 +3273V3 Rtp -1 A01X+039386Y-040285X0315Y0374R000S2 +327FAN_TACH Rtp -2 A01X+040036Y-040285X0315Y0374R000S2 +327/5V_FAN JP1 -1 A01X+064918Y-031623X0394Y0197R000S2 +327/VEH5V JP1 -2 A01X+065430Y-031623X0394Y0197R000S2 +3273V3 R30 -1 A01X+048855Y-044222X0315Y0374R000S2 +327/I2C_SCL R30 -2 A01X+049505Y-044222X0315Y0374R000S2 +327/BAT_SENSE R6 -1 A01X+038550Y-044222X0315Y0374R000S2 +327GND R6 -2 A01X+039199Y-044222X0315Y0374R000S2 +317/NTC_TEMP P12 -1 D0394PA00X+082753Y-047765X0669Y0787R270S0 +317GND P12 -2 D0394PA00X+082753Y-046781X0669Y0787R270S0 +327/MAIN5V C32 -1 A01X+046926Y-041072X0453Y1063R000S2 +327GND C32 -2 A01X+048087Y-041072X0453Y1063R000S2 +317GND J9 -A1 D0157PA00X+063455Y-050955X0276Y0000R000S0 +317/USB_VBUS J9 -A4 D0157PA00X+063789Y-050955X0276Y0000R000S0 +317/USB_CC1 J9 -A5 D0157PA00X+064124Y-050955X0276Y0000R000S0 +317/USB_DP J9 -A6 D0157PA00X+064459Y-050955X0276Y0000R000S0 +317/USB_DM J9 -A7 D0157PA00X+064793Y-050955X0276Y0000R000S0 +317N/C J9 -A8 D0157PA00X+065128Y-050955X0276Y0000R000S0 +317/USB_VBUS J9 -A9 D0157PA00X+065463Y-050955X0276Y0000R000S0 +317GND J9 -A12 D0157PA00X+065797Y-050955X0276Y0000R000S0 +317GND J9 -B1 D0157PA00X+065797Y-051486X0276Y0000R000S0 +317/USB_VBUS J9 -B4 D0157PA00X+065463Y-051486X0276Y0000R000S0 +317/USB_CC2 J9 -B5 D0157PA00X+065128Y-051486X0276Y0000R000S0 +317/USB_DP J9 -B6 D0157PA00X+064793Y-051486X0276Y0000R000S0 +317/USB_DM J9 -B7 D0157PA00X+064459Y-051486X0276Y0000R000S0 +317N/C J9 -B8 D0157PA00X+064124Y-051486X0276Y0000R000S0 +317/USB_VBUS J9 -B9 D0157PA00X+063789Y-051486X0276Y0000R000S0 +317GND J9 -B12 D0157PA00X+063455Y-051486X0276Y0000R000S0 +317GND J9 -SH D0236PA00X+062923Y-051341X0354Y0945R000S0 +317GND J9 -SH D0236PA00X+062923Y-052671X0354Y0669R000S0 +317GND J9 -SH D0236PA00X+066329Y-051341X0354Y0945R000S0 +317GND J9 -SH D0236PA00X+066329Y-052671X0354Y0669R000S0 +327EXT_LED Q4 -1 A01X+036148Y-041289X0581Y0236R000S2 +327GND Q4 -2 A01X+036148Y-042037X0581Y0236R000S2 +327/LED_K Q4 -3 A01X+036886Y-041663X0581Y0236R000S2 +317/24V_IN P1 -1 D0512PA00X+067989Y-052686X1024Y1024R090S0 +317GND P1 -2 D0512PA00X+069957Y-052686X1024Y0000R090S0 +317IGN_IN P1 -3 D0512PA00X+071926Y-052686X1024Y0000R090S0 +317P1-PIN_4-PAD4) P1 -4 D0512PA00X+073894Y-052686X1024Y0000R090S0 +317P1-PIN_5-PAD5) P1 -5 D0512PA00X+075863Y-052686X1024Y0000R090S0 +327/SYS5V F1 -1 A01X+057108Y-018237X0443Y1339R000S2 +327/SW_IN F1 -2 A01X+058791Y-018237X0443Y1339R000S2 +327/PFI R52 -1 A01X+042339Y-040285X0315Y0374R000S2 +327GND R52 -2 A01X+042989Y-040285X0315Y0374R000S2 +317USART1_RX K1 -1 D0394PA00X+074521Y-021994X0787Y0787R000S0 +317/SYS5V K1 -2 D0394PA00X+074521Y-022994X0787Y0000R000S0 +317/DIN_4G K1 -5 D0394PA00X+074521Y-025994X0787Y0000R000S0 +317/DIN_4G K1 -6 D0394PA00X+076521Y-025994X0787Y0000R000S0 +317/KCOIL K1 -9 D0394PA00X+076521Y-022994X0787Y0000R000S0 +317/USART1_TX K1 -10 D0394PA00X+076521Y-021994X0787Y0000R000S0 +317/BATLED1 J2 -1 D0394PA00X+042201Y-029174X0669Y0669R270S0 +317/BATLED2 J2 -2 D0394PA00X+043201Y-029174X0669Y0000R270S0 +317/BATLED3 J2 -3 D0394PA00X+044201Y-029174X0669Y0000R270S0 +317/BATLED4 J2 -4 D0394PA00X+045201Y-029174X0669Y0000R270S0 +317/CHRG_EN J2 -5 D0394PA00X+046201Y-029174X0669Y0000R270S0 +317/USART1_TX J2 -6 D0394PA00X+047201Y-029174X0669Y0000R270S0 +317USART1_RX J2 -7 D0394PA00X+048201Y-029174X0669Y0000R270S0 +317J2-PIN_8-PAD8) J2 -8 D0394PA00X+049201Y-029174X0669Y0000R270S0 +317J2-PIN_9-PAD9) J2 -9 D0394PA00X+050201Y-029174X0669Y0000R270S0 +317-PIN_10-PAD10) J2 -10 D0394PA00X+051201Y-029174X0669Y0000R270S0 +317/CHRG_STAT J2 -11 D0394PA00X+052201Y-029174X0669Y0000R270S0 +317/CHRG_FAULT J2 -12 D0394PA00X+053201Y-029174X0669Y0000R270S0 +317/BYP_CTRL J2 -13 D0394PA00X+054201Y-029174X0669Y0000R270S0 +317/I2C_SCL J2 -14 D0394PA00X+055201Y-029174X0669Y0000R270S0 +317/I2C_SDA J2 -15 D0394PA00X+056201Y-029174X0669Y0000R270S0 +317_16-PAD16)#1 J2 -16 D0394PA00X+057201Y-029174X0669Y0000R270S0 +317-PIN_17-PAD17) J2 -17 D0394PA00X+058201Y-029174X0669Y0000R270S0 +317/SYS5V J2 -18 D0394PA00X+059201Y-029174X0669Y0000R270S0 +317GND J2 -19 D0394PA00X+060201Y-029174X0669Y0000R270S0 +3173V3 J2 -20 D0394PA00X+061201Y-029174X0669Y0000R270S0 +327/CHRG_EN R56 -1 A01X+041355Y-042253X0315Y0374R000S2 +327GND R56 -2 A01X+042005Y-042253X0315Y0374R000S2 +32724V C11 -1 A01X+063550Y-020167X0354Y0374R000S2 +327GND C11 -2 A01X+064160Y-020167X0354Y0374R000S2 +327/3V3_MODEM C43 -1 A01X+071847Y-048159X1378Y0630R000S2 +327GND C43 -2 A01X+073973Y-048159X1378Y0630R000S2 +327Q10_GATE DzG -1 A01X+038683Y-023769X0581Y0236R000S2 +327N/C DzG -2 A01X+038683Y-024517X0581Y0236R000S2 +32724V DzG -3 A01X+039421Y-024143X0581Y0236R000S2 +327/BYP_CTRL R40 -1 A01X+070223Y-026968X0315Y0374R090S2 +327/Q6_BASE R40 -2 A01X+070223Y-027617X0315Y0374R090S2 +3273V3 R42 -1 A01X+044918Y-044222X0315Y0374R000S2 +327/NTC_TEMP R42 -2 A01X+045568Y-044222X0315Y0374R000S2 +327/MAIN5V U6 -1 A01X+047162Y-036545X0335Y0098R000S2 +327/PROG U6 -2 A01X+047162Y-036741X0335Y0098R000S2 +327/CLPROG_TP U6 -3 A01X+047162Y-036938X0335Y0098R000S2 +327/CHRG_EN U6 -4 A01X+047162Y-037135X0335Y0098R000S2 +327GND U6 -5 A01X+047162Y-037332X0335Y0098R000S2 +327/VEH5V U6 -6 A01X+047162Y-037529X0335Y0098R000S2 +327/VIN_SW U6 -7 A01X+047162Y-037726X0335Y0098R000S2 +327/CHRG_STAT U6 -8 A01X+047536Y-038100X0098Y0335R000S2 +327/CHRG_FAULT U6 -9 A01X+047733Y-038100X0098Y0335R000S2 +327/VFB_BST U6 -10 A01X+047930Y-038100X0098Y0335R000S2 +327(U6-RST-PAD11) U6 -11 A01X+048127Y-038100X0098Y0335R000S2 +327/F2_SEL U6 -12 A01X+048323Y-038100X0098Y0335R000S2 +327/F1_SEL U6 -13 A01X+048698Y-037726X0335Y0098R000S2 +327/F0_SEL U6 -14 A01X+048698Y-037529X0335Y0098R000S2 +327/IGATE U6 -15 A01X+048698Y-037332X0335Y0098R000S2 +327/VEH5V U6 -16 A01X+048698Y-037135X0335Y0098R000S2 +327/NTC U6 -17 A01X+048698Y-036938X0335Y0098R000S2 +327/VFB_BST U6 -18 A01X+048698Y-036741X0335Y0098R000S2 +327/PFI U6 -19 A01X+048698Y-036545X0335Y0098R000S2 +327/PFO_TP U6 -20 A01X+048323Y-036171X0098Y0335R000S2 +327/SW_BAT U6 -21 A01X+048127Y-036171X0098Y0335R000S2 +327/SW_BAT U6 -22 A01X+047930Y-036171X0098Y0335R000S2 +327/BAT_PLUS U6 -23 A01X+047733Y-036171X0098Y0335R000S2 +327/MAIN5V U6 -24 A01X+047536Y-036171X0098Y0335R000S2 +327GND U6 -25 A01X+047930Y-037135X1043Y1437R000S2 +327GND JP3 -1 A01X+055154Y-037332X0394Y0197R000S2 +327/F1_SEL JP3 -2 A01X+055666Y-037332X0394Y0591R000S2 +327/MAIN5V JP3 -3 A01X+056178Y-037332X0394Y0197R000S2 +327Q10_GATE Q10 -1 A01X+033524Y-020489X0866Y0472R000S2 +327/24V_IN Q10 -2 A01X+036005Y-021387X2520Y2283R000S2 +32724V Q10 -3 A01X+033524Y-022285X0866Y0472R000S2 +327/MAIN5V R53 -1 A01X+052772Y-035954X0315Y0374R000S2 +327/VFB_BST R53 -2 A01X+053422Y-035954X0315Y0374R000S2 +327/VEH5V R51 -1 A01X+040961Y-040285X0315Y0374R000S2 +327/PFI R51 -2 A01X+041611Y-040285X0315Y0374R000S2 +32724V C10 -1 A01X+034249Y-028277X1378Y0630R000S2 +327GND C10 -2 A01X+036375Y-028277X1378Y0630R000S2 +327/COMP3 Rcomp2-1 A01X+070420Y-045796X0315Y0374R000S2 +327/COMP3_C Rcomp2-2 A01X+071070Y-045796X0315Y0374R000S2 +317/NRST SW1 -1 D0433PA00X+078422Y-052489X0787Y0000R270S0 +317/NRST SW1 -1 D0433PA00X+080981Y-052489X0787Y0000R270S0 +317GND SW1 -2 D0433PA00X+078422Y-054261X0787Y0000R270S0 +317GND SW1 -2 D0433PA00X+080981Y-054261X0787Y0000R270S0 +3273V3 R58 -1 A01X+052822Y-041072X0315Y0374R000S2 +327/CHRG_FAULT R58 -2 A01X+053471Y-041072X0315Y0374R000S2 +327Q10_GATE Rrp -1 A01X+033215Y-024143X0315Y0374R000S2 +327GND Rrp -2 A01X+033865Y-024143X0315Y0374R000S2 +327/Q6_BASE Q6 -1 A01X+071754Y-024556X0581Y0236R000S2 +327/KCOIL Q6 -2 A01X+071754Y-025304X0581Y0236R000S2 +327GND Q6 -3 A01X+072492Y-024930X0581Y0236R000S2 +327/VEH5V C31 -1 A01X+043953Y-038316X0354Y0374R000S2 +327GND C31 -2 A01X+044564Y-038316X0354Y0374R000S2 +327/FB_FAN R21 -1 A01X+069396Y-017844X0315Y0374R000S2 +327GND R21 -2 A01X+070046Y-017844X0315Y0374R000S2 +327/VEH5V C30 -1 A01X+039072Y-038710X0394Y0571R000S2 +327GND C30 -2 A01X+039820Y-038710X0394Y0571R000S2 +327/VEH5V R7 -1 A01X+040194Y-044222X0315Y0374R000S2 +327/5V_SENSE R7 -2 A01X+040843Y-044222X0315Y0374R000S2 +327/SW_5V C3 -1 A01X+060902Y-020167X1378Y0630R270S2 +327GND C3 -2 A01X+060902Y-018041X1378Y0630R270S2 +3273V3 D5 -1 A01X+036827Y-032804X0354Y0472R000S2 +327IGN_SENSE D5 -2 A01X+038127Y-032804X0354Y0472R000S2 +327/MAIN5V C33 -1 A01X+049091Y-041072X0453Y1063R000S2 +327GND C33 -2 A01X+050253Y-041072X0453Y1063R000S2 +327FREQ_FAN Rfreq -1 A01X+063439Y-022197X0315Y0374R270S2 +327GND Rfreq -2 A01X+063439Y-021547X0315Y0374R270S2 +317/SW_5V P3 -1 D0374PA00X+082753Y-037529X0669Y0768R270S0 +317GND P3 -2 D0374PA00X+082753Y-036545X0669Y0768R270S0 +317/GNSS_TX P3 -3 D0374PA00X+082753Y-035560X0669Y0768R270S0 +317/GNSS_RX P3 -4 D0374PA00X+082753Y-034576X0669Y0768R270S0 +327IGN_IN Rig -1 A01X+040233Y-027293X0315Y0374R180S2 +327IGN_SENSE Rig -2 A01X+039583Y-027293X0315Y0374R180S2 +327/BATLED1 RB1 -1 A01X+076153Y-019025X0315Y0374R000S2 +327/BLED1 RB1 -2 A01X+076803Y-019025X0315Y0374R000S2 +32724V Ren1 -1 A01X+068255Y-023356X0315Y0374R000S2 +327/EN_FAN Ren1 -2 A01X+068904Y-023356X0315Y0374R000S2 +327/BAT_SENSE C5 -1 A01X+035991Y-045796X0354Y0374R000S2 +327GND C5 -2 A01X+036601Y-045796X0354Y0374R000S2 +327/5V_SENSE R8 -1 A01X+041768Y-044222X0315Y0374R000S2 +327GND R8 -2 A01X+042418Y-044222X0315Y0374R000S2 +327/NTC_TEMP C24 -1 A01X+046512Y-044222X0354Y0374R000S2 +327GND C24 -2 A01X+047123Y-044222X0354Y0374R000S2 +327/VFB_BST R54 -1 A01X+052772Y-037529X0315Y0374R000S2 +327GND R54 -2 A01X+053422Y-037529X0315Y0374R000S2 +3273V3 R57 -1 A01X+052772Y-039300X0315Y0374R000S2 +327/CHRG_STAT R57 -2 A01X+053422Y-039300X0315Y0374R000S2 +327/PROG R50 -1 A01X+043914Y-040285X0315Y0374R000S2 +327GND R50 -2 A01X+044564Y-040285X0315Y0374R000S2 +327/SW3_NODE Dbk2 -1 A01X+073422Y-040875X0984Y0709R000S2 +327GND Dbk2 -2 A01X+074997Y-040875X0984Y0709R000S2 +327/PFO_TP TP2 -1 A01X+050272Y-034379X0591Y0000R000S2 +3273V3 Cu4 -1 A01X+053599Y-044222X0354Y0374R000S2 +327GND Cu4 -2 A01X+054209Y-044222X0354Y0374R000S2 +327/5V_FAN C23 -1 A01X+070390Y-020167X0394Y0571R000S2 +327GND C23 -2 A01X+071138Y-020167X0394Y0571R000S2 +327/MAIN5V JP2 -1 A01X+055154Y-035560X0394Y0197R000S2 +327/F2_SEL JP2 -2 A01X+055666Y-035560X0394Y0591R000S2 +327GND JP2 -3 A01X+056178Y-035560X0394Y0197R000S2 +327/SYS5V D6 -1 A01X+079268Y-024340X0354Y0472R180S2 +327/KCOIL D6 -2 A01X+077969Y-024340X0354Y0472R180S2 +327GND D4G -1 A01X+079592Y-036260X0384Y0551R000S2 +327/MODEM_LED_A D4G -2 A01X+080330Y-036260X0384Y0551R000S2 +327/SW3_NODE L7 -1 A01X+064485Y-046584X0787Y1260R000S2 +327/3V3_MODEM L7 -2 A01X+067556Y-046584X0787Y1260R000S2 +317(MOD1-NC-PAD1) MOD1 -1 D0394PA00X+045375Y-051017X0630Y0630R090S0 +3173V3 MOD1 -2 D0394PA00X+046375Y-051017X0630Y0630R090S0 +317D1-RESET-PAD3) MOD1 -3 D0394PA00X+047375Y-051017X0630Y0630R090S0 +317-3V3_OUT-PAD4) MOD1 -4 D0394PA00X+048375Y-051017X0630Y0630R090S0 +317/SW_5V MOD1 -5 D0394PA00X+049375Y-051017X0630Y0630R090S0 +317GND MOD1 -6 D0394PA00X+050375Y-051017X0630Y0630R090S0 +317GND MOD1 -7 D0394PA00X+051375Y-051017X0630Y0630R090S0 +317MOD1-VIN-PAD8) MOD1 -8 D0394PA00X+052375Y-051017X0630Y0630R090S0 +317(MOD1-A0-PAD9) MOD1 -9 D0394PA00X+054375Y-051017X0630Y0630R090S0 +317MOD1-A1-PAD10) MOD1 -10 D0394PA00X+055375Y-051017X0630Y0630R090S0 +317MOD1-A2-PAD11) MOD1 -11 D0394PA00X+056375Y-051017X0630Y0630R090S0 +317MOD1-A3-PAD12) MOD1 -12 D0394PA00X+057375Y-051017X0630Y0630R090S0 +317MOD1-A4-PAD13) MOD1 -13 D0394PA00X+058375Y-051017X0630Y0630R090S0 +317MOD1-A5-PAD14) MOD1 -14 D0394PA00X+059375Y-051017X0630Y0630R090S0 +317/GNSS_RX MOD1 -15 D0394PA00X+059375Y-032017X0630Y0630R090S0 +317/GNSS_TX MOD1 -16 D0394PA00X+058375Y-032017X0630Y0630R090S0 +317/DOUT_4G MOD1 -17 D0394PA00X+057375Y-032017X0630Y0630R090S0 +317MOD1-D3-PAD18) MOD1 -18 D0394PA00X+056375Y-032017X0630Y0630R090S0 +317MOD1-D4-PAD19) MOD1 -19 D0394PA00X+055375Y-032017X0630Y0630R090S0 +317MOD1-D5-PAD20) MOD1 -20 D0394PA00X+054375Y-032017X0630Y0630R090S0 +317MOD1-D6-PAD21) MOD1 -21 D0394PA00X+053375Y-032017X0630Y0630R090S0 +317MOD1-D7-PAD22) MOD1 -22 D0394PA00X+052375Y-032017X0630Y0630R090S0 +317USART1_RX MOD1 -23 D0394PA00X+050776Y-032017X0630Y0630R090S0 +317MOD1-D9-PAD24) MOD1 -24 D0394PA00X+049776Y-032017X0630Y0630R090S0 +317OD1-D10-PAD25) MOD1 -25 D0394PA00X+048776Y-032017X0630Y0630R090S0 +317NCE_D11-PAD26) MOD1 -26 D0394PA00X+047776Y-032017X0630Y0630R090S0 +317INT_D12-PAD27) MOD1 -27 D0394PA00X+046776Y-032017X0630Y0630R090S0 +317TPS_D13-PAD28) MOD1 -28 D0394PA00X+045776Y-032017X0630Y0630R090S0 +317GND MOD1 -29 D0394PA00X+044776Y-032017X0630Y0630R090S0 +317D1-AREF-PAD30) MOD1 -30 D0394PA00X+043776Y-032017X0630Y0630R090S0 +317OD1-SDA-PAD31) MOD1 -31 D0394PA00X+042776Y-032017X0630Y0630R090S0 +317OD1-SCL-PAD32) MOD1 -32 D0394PA00X+041776Y-032017X0630Y0630R090S0 +999 diff --git a/03-Architecture-Hardware/kicad/~hbox-watchdog-v3.kicad_pro.lck b/03-Architecture-Hardware/kicad/~hbox-watchdog-v3.kicad_pro.lck deleted file mode 100644 index 41087b6..0000000 --- a/03-Architecture-Hardware/kicad/~hbox-watchdog-v3.kicad_pro.lck +++ /dev/null @@ -1 +0,0 @@ -{"hostname":"Leopoldos-MacBook-Pro","username":"leo"} \ No newline at end of file